rename target/linux/generic-2.6 to generic

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21952 3c298f89-4303-0410-b956-a3cf2f4a3e73

1041 files changed, 506681 insertions, 0 deletions

diff --git a/target/linux/generic/base-files/init b/target/linux/generic/base-files/init
new file mode 100755
index 0000000000..9e8ba7c5eb
--- /dev/null
+++ b/target/linux/generic/base-files/init
@@ -0,0 +1,83 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+INITRAMFS=1
+
+. /etc/preinit
+
+set_state init
+echo "- init -"
+
+# if we have no root parameter, just go to running from ramfs
+[ -z $rootfs ] && {
+  export NOMOUNT="No Root"
+  exec /sbin/init
+}
+
+#if we have a failsafe boot selected, dont bother
+#trying to find or wait for a root mount point
+[ -z "$FAILSAFE" ] || {
+  exec /bin/busybox init
+}
+
+# Load the modules we have in initramfs, this should
+# make the media accessible, but, it may take some time
+. /etc/functions.sh
+load_modules /etc/modules /etc/modules.d/*
+
+#wait 10 seconds for the disc to show up
+#usb stick typically takes 4 to 6 seconds
+#till it's readable
+#it's quite possible the disc never shows up
+#if we netbooted this kernel
+COUNTER=0
+while [ $COUNTER -lt 10 ]; do
+  sleep 1
+  [ -e $rootfs ] && let COUNTER=10;
+  let COUNTER=COUNTER+1
+done
+[ -e $rootfs ] || {
+  export FAILSAFE="NoDisc"
+  exec /bin/busybox init
+}
+
+# now we'll try mount it, again with a timeout
+# This will fail if the inserted stick is formatted
+# in a manner we dont understand
+COUNTER=0
+while [ $COUNTER -lt 10 ]; do
+  sleep 1
+  mount $rootfs /mnt
+  [ $? -eq "0" ] && let COUNTER=100;
+  let COUNTER=COUNTER+1
+done
+[ $? -ne "0" ] && {
+  export FAILSAFE="MountFail"
+  exec /bin/busybox init
+}
+
+#It mounted, lets look for a postinit file, again, give it time
+#I've seen this take 6 seconds to actually complete
+COUNTER=0
+while [ $COUNTER -lt 10 ]; do
+  sleep 1
+  [ -e /mnt/etc/banner ] && let COUNTER=10;
+  let COUNTER=COUNTER+1
+done
+[ -e /mnt/etc/banner ] || {
+  export FAILSAFE="No Openwrt FS"
+  exec /bin/busybox init
+}
+
+unset rootfs
+
+mount -o move /proc /mnt/proc
+mount -o move /dev /mnt/dev
+mount -o move /dev/pts /mnt/dev/pts
+mount -o move /tmp /mnt/tmp
+mount -o move /sys /mnt/sys
+mount none /tmp -t tmpfs
+killall -q hotplug2
+exec switch_root -c /dev/console /mnt /sbin/init
+
+set_state done
diff --git a/target/linux/generic/config-2.6.25 b/target/linux/generic/config-2.6.25
new file mode 100644
index 0000000000..cf29de5aed
--- /dev/null
+++ b/target/linux/generic/config-2.6.25
@@ -0,0 +1,2036 @@
+# CONFIG_6PACK is not set
+# CONFIG_8139CP is not set
+# CONFIG_9P_FS is not set
+# CONFIG_ACENIC is not set
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_ADFS_FS is not set
+# CONFIG_ADM6996_PHY is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_AIRO is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_AMIGA_PARTITION is not set
+CONFIG_ANON_INODES=y
+# CONFIG_APPLICOM is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_ORION is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCNET is not set
+CONFIG_ARPD=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_ATA is not set
+# CONFIG_ATALK is not set
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_ATA_SFF=y
+# CONFIG_ATL1 is not set
+# CONFIG_ATM_AMBASSADOR is not set
+CONFIG_ATM_BR2684_IPFILTER=y
+# CONFIG_ATM_BR2684 is not set
+# CONFIG_ATM_CLIP is not set
+CONFIG_ATM_CLIP_NO_ICMP=y
+# CONFIG_ATM_DRIVERS is not set
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATMEL is not set
+# CONFIG_ATM_ENI is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_FORE200E_MAYBE is not set
+# CONFIG_ATM_HE is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_IA is not set
+# CONFIG_ATM_IDT77252 is not set
+# CONFIG_ATM is not set
+# CONFIG_ATM_LANAI is not set
+# CONFIG_ATM_LANE is not set
+# CONFIG_ATM_MPOA is not set
+# CONFIG_ATM_NICSTAR is not set
+# CONFIG_ATM_TCP is not set
+# CONFIG_ATM_ZATM is not set
+# CONFIG_AUDIT is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AX25_DAMA_SLAVE is not set
+# CONFIG_AX25 is not set
+# CONFIG_AX88796 is not set
+# CONFIG_B44 is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_BASE_FULL=y
+CONFIG_BASE_SMALL=0
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BAYCOM_EPP is not set
+# CONFIG_BAYCOM_PAR is not set
+# CONFIG_BAYCOM_SER_FDX is not set
+# CONFIG_BAYCOM_SER_HDX is not set
+CONFIG_BCM43XX_DEBUG=y
+CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
+# CONFIG_BCM43XX_DMA_MODE is not set
+CONFIG_BCM43XX_DMA=y
+# CONFIG_BCM43XX is not set
+# CONFIG_BCM43XX_PIO_MODE is not set
+CONFIG_BCM43XX_PIO=y
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_BLINK is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_ATIIXP is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_CMD640 is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_CS5535 is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_DELKIN is not set
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_HD_IDE is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_RZ1000 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SIS5513 is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+CONFIG_BLK_DEV=y
+CONFIG_BLOCK=y
+# CONFIG_BNX2 is not set
+# CONFIG_BONDING is not set
+# CONFIG_BPQETHER is not set
+# CONFIG_BRIDGE_EBT_802_3 is not set
+# CONFIG_BRIDGE_EBT_AMONG is not set
+# CONFIG_BRIDGE_EBT_ARP is not set
+# CONFIG_BRIDGE_EBT_ARPREPLY is not set
+# CONFIG_BRIDGE_EBT_BROUTE is not set
+# CONFIG_BRIDGE_EBT_DNAT is not set
+# CONFIG_BRIDGE_EBT_IP is not set
+# CONFIG_BRIDGE_EBT_LIMIT is not set
+# CONFIG_BRIDGE_EBT_LOG is not set
+# CONFIG_BRIDGE_EBT_MARK is not set
+# CONFIG_BRIDGE_EBT_MARK_T is not set
+# CONFIG_BRIDGE_EBT_NFLOG is not set
+# CONFIG_BRIDGE_EBT_PKTTYPE is not set
+# CONFIG_BRIDGE_EBT_REDIRECT is not set
+# CONFIG_BRIDGE_EBT_SNAT is not set
+# CONFIG_BRIDGE_EBT_STP is not set
+# CONFIG_BRIDGE_EBT_T_FILTER is not set
+# CONFIG_BRIDGE_EBT_T_NAT is not set
+# CONFIG_BRIDGE_EBT_ULOG is not set
+# CONFIG_BRIDGE_EBT_VLAN is not set
+# CONFIG_BRIDGE_NETFILTER is not set
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+CONFIG_BRIDGE=y
+# CONFIG_BROADCOM_PHY is not set
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BT_BNEP is not set
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+# CONFIG_BT_CMTP is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIDTL1 is not set
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIUSB is not set
+CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_HIDP is not set
+# CONFIG_BT is not set
+# CONFIG_BT_L2CAP is not set
+# CONFIG_BT_RFCOMM is not set
+CONFIG_BT_RFCOMM_TTY=y
+# CONFIG_BT_SCO is not set
+CONFIG_BUG=y
+# CONFIG_CAN is not set
+# CONFIG_CAPI_AVM is not set
+# CONFIG_CAPI_EICON is not set
+# CONFIG_CAPI_TRACE is not set
+CONFIG_CARDBUS=y
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_CASSINI is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_CFG80211 is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_CIFS is not set
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+CONFIG_CLS_U32_MARK=y
+CONFIG_CLS_U32_PERF=y
+CONFIG_CMDLINE=""
+# CONFIG_CODA_FS is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CROSSCOMPILE=y
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ALGAPI is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_BLKCIPHER is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_HASH is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_TWOFISH_COMMON is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+CONFIG_CRYPTO=y
+# CONFIG_DAB is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DECNET is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_BIC is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_CUBIC is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_HTCP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_DEFAULT_NOOP is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="westwood"
+# CONFIG_DEFAULT_VEGAS is not set
+CONFIG_DEFAULT_WESTWOOD=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+# CONFIG_DEVFS_DEBUG is not set
+CONFIG_DEVFS_FS=y
+CONFIG_DEVFS_MOUNT=y
+# CONFIG_DGRS is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DL2K is not set
+# CONFIG_DLM is not set
+# CONFIG_DMA_ENGINE is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_DRM is not set
+# CONFIG_DS1682 is not set
+# CONFIG_DTLK is not set
+# CONFIG_DUMMY is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DVB is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000 is not set
+# CONFIG_E100 is not set
+# CONFIG_ECONET is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_ELF_CORE is not set
+CONFIG_EMBEDDED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_EPIC100 is not set
+CONFIG_EPOLL=y
+# CONFIG_EQUALIZER is not set
+CONFIG_EVENTFD=y
+CONFIG_EXPERIMENTAL=y
+# CONFIG_EXPORTFS is not set
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_FAT_FS is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB is not set
+# CONFIG_FB_PXA is not set
+# CONFIG_FDDI is not set
+# CONFIG_FEALNX is not set
+CONFIG_FIB_RULES=y
+# CONFIG_FIREWIRE is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_FORCEDETH is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FTL is not set
+# CONFIG_FUSE_FS is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SAS is not set
+# CONFIG_FUSION_SPI is not set
+CONFIG_FUTEX=y
+CONFIG_FW_LOADER=y
+CONFIG_GACT_PROB=y
+# CONFIG_GAMEPORT is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_TIME=y
+# CONFIG_GFS2_FS is not set
+# CONFIG_GPIO_DEVICE is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_HAMACHI is not set
+CONFIG_HAMRADIO=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_HERMES is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HID_FF is not set
+# CONFIG_HID is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_HIGH_RES_TIMERS=y
+# CONFIG_HIPPI is not set
+# CONFIG_HOSTAP_CS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_HOSTAP_PCI is not set
+# CONFIG_HOSTAP_PLX is not set
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_HOTPLUG_PCI is not set
+CONFIG_HOTPLUG=y
+# CONFIG_HP100 is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+CONFIG_HZ=100
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_1024 is not set
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_48 is not set
+# CONFIG_I2C_ALGOPCA is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_CHARDEV is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_ELEKTOR is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_IBM_IIC is not set
+# CONFIG_I2C is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PCA is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2O is not set
+# CONFIG_I82092 is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_ONLYDISK is not set
+CONFIG_IDE_MAX_HWIFS=4
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+CONFIG_IDE_PROC_FS=y
+# CONFIG_IDE_TASK_IOCTL is not set
+# CONFIG_IEEE1394_DV1394 is not set
+# CONFIG_IEEE1394_ETH1394 is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_IEEE1394_OHCI1394 is not set
+# CONFIG_IEEE1394_PCILYNX is not set
+# CONFIG_IEEE1394_RAWIO is not set
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+# CONFIG_IEEE1394_VIDEO1394 is not set
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_IEEE80211_CRYPT_WEP is not set
+# CONFIG_IEEE80211_DEBUG is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_IEEE80211_SOFTMAC is not set
+# CONFIG_IFB is not set
+# CONFIG_IGB is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_IKCONFIG_PROC is not set
+# CONFIG_IMQ_BEHAVIOR_AA is not set
+# CONFIG_IMQ_BEHAVIOR_AB is not set
+CONFIG_IMQ_BEHAVIOR_BA=y
+# CONFIG_IMQ_BEHAVIOR_BB is not set
+# CONFIG_IMQ is not set
+CONFIG_IMQ_NUM_DEVS=2
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_TCP_DIAG is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET=y
+# CONFIG_INFINIBAND is not set
+# CONFIG_INFTL is not set
+CONFIG_INIT_ENV_ARG_LIMIT=32
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_PCSPKR is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_WISTRON_BTNS is not set
+# CONFIG_INSTRUMENTATION is not set
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IP1000 is not set
+# CONFIG_IP6_NF_FILTER is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP6_NF_MANGLE is not set
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
+# CONFIG_IP6_NF_MATCH_LIMIT is not set
+# CONFIG_IP6_NF_MATCH_MH is not set
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_OWNER is not set
+# CONFIG_IP6_NF_MATCH_RT is not set
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_RAW is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+# CONFIG_IP6_NF_TARGET_IMQ is not set
+# CONFIG_IP6_NF_TARGET_LOG is not set
+# CONFIG_IP6_NF_TARGET_REJECT is not set
+# CONFIG_IP6_NF_TARGET_ROUTE is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IPC_NS is not set
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_MULTIPLE_TABLES=y
+# CONFIG_IP_NF_AMANDA is not set
+# CONFIG_IP_NF_ARPFILTER is not set
+# CONFIG_IP_NF_ARP_MANGLE is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK=y
+CONFIG_IP_NF_CT_ACCT=y
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+# CONFIG_IP_NF_FILTER is not set
+# CONFIG_IP_NF_FTP is not set
+# CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_IRC is not set
+# CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+# CONFIG_IP_NF_MATCH_IPP2P is not set
+# CONFIG_IP_NF_MATCH_OWNER is not set
+# CONFIG_IP_NF_MATCH_RECENT is not set
+# CONFIG_IP_NF_MATCH_SET is not set
+# CONFIG_IP_NF_MATCH_TIME is not set
+# CONFIG_IP_NF_MATCH_TOS is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+# CONFIG_IP_NF_NAT_AMANDA is not set
+# CONFIG_IP_NF_NAT_FTP is not set
+# CONFIG_IP_NF_NAT_H323 is not set
+# CONFIG_IP_NF_NAT_IRC is not set
+CONFIG_IP_NF_NAT_NEEDED=y
+# CONFIG_IP_NF_NAT_PPTP is not set
+# CONFIG_IP_NF_NAT_SIP is not set
+# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
+# CONFIG_IP_NF_NAT_TFTP is not set
+CONFIG_IP_NF_NAT=y
+# CONFIG_IP_NF_NETBIOS_NS is not set
+# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_RAW is not set
+CONFIG_IP_NF_SET_HASHSIZE=1024
+# CONFIG_IP_NF_SET_IPHASH is not set
+# CONFIG_IP_NF_SET_IPMAP is not set
+# CONFIG_IP_NF_SET_IPPORTHASH is not set
+# CONFIG_IP_NF_SET_IPTREE is not set
+# CONFIG_IP_NF_SET_IPTREEMAP is not set
+# CONFIG_IP_NF_SET is not set
+# CONFIG_IP_NF_SET_MACIPMAP is not set
+CONFIG_IP_NF_SET_MAX=256
+# CONFIG_IP_NF_SET_NETHASH is not set
+# CONFIG_IP_NF_SET_PORTMAP is not set
+# CONFIG_IP_NF_SIP is not set
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_IMQ is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_MASQUERADE is not set
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_IP_NF_TARGET_REJECT is not set
+# CONFIG_IP_NF_TARGET_ROUTE is not set
+# CONFIG_IP_NF_TARGET_SAME is not set
+# CONFIG_IP_NF_TARGET_SET is not set
+# CONFIG_IP_NF_TARGET_TOS is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+# CONFIG_IP_NF_TFTP is not set
+# CONFIG_IP_PIMSM_V1 is not set
+# CONFIG_IP_PIMSM_V2 is not set
+# CONFIG_IP_PNP is not set
+CONFIG_IP_ROUTE_FWMARK=y
+CONFIG_IP_ROUTE_MULTIPATH_CACHED=y
+# CONFIG_IP_ROUTE_MULTIPATH_DRR is not set
+# CONFIG_IP_ROUTE_MULTIPATH_RANDOM is not set
+# CONFIG_IP_ROUTE_MULTIPATH_RR is not set
+# CONFIG_IP_ROUTE_MULTIPATH_WRANDOM is not set
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_SCTP is not set
+CONFIG_IPSEC_NAT_TRAVERSAL=y
+# CONFIG_IPV6 is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTE_INFO is not set
+CONFIG_IPV6_ROUTER_PREF=y
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IP_VS is not set
+# CONFIG_IPW2100_DEBUG is not set
+# CONFIG_IPW2100 is not set
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2200_DEBUG is not set
+# CONFIG_IPW2200 is not set
+CONFIG_IPW2200_MONITOR=y
+# CONFIG_IPW2200_PROMISCUOUS is not set
+# CONFIG_IPW2200_QOS is not set
+# CONFIG_IPW2200_RADIOTAP is not set
+# CONFIG_IPX is not set
+# CONFIG_IRDA is not set
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_ISDN is not set
+# CONFIG_ISO9660_FS is not set
+# CONFIG_IXGB is not set
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_JBD is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_FS=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_JOLIET=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_KEXEC is not set
+# CONFIG_KEYS is not set
+CONFIG_KMOD=y
+# CONFIG_LAPB is not set
+# CONFIG_LASAT is not set
+CONFIG_LBD=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+# CONFIG_LEDS_TRIGGER_MORSE is not set
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_LIBCRC32C is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_USB is not set
+# CONFIG_LLC2 is not set
+CONFIG_LLC=y
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_LOCKD is not set
+CONFIG_LOCKD_V4=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_LSF is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_MAC80211_DEBUG is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC_EMUMOUSEBTN is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MARKERS is not set
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_MD is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_MFD_SM501 is not set
+CONFIG_MII=y
+CONFIG_MINI_FO=y
+# CONFIG_MINIX_FS is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_MIPS_FPU_EMU is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_MKISS is not set
+# CONFIG_MMC_ARMMMCI is not set
+# CONFIG_MMC_AT91 is not set
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_MMC_BLOCK is not set
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+CONFIG_MMU=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_MSDOS_FS is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_BLKDEVS=y
+# CONFIG_MTD_BLOCK2MTD is not set
+CONFIG_MTD_BLOCK=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_JEDECPROBE is not set
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_OOPS is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_ROM is not set
+CONFIG_MTD_ROOTFS_ROOT_DEV=y
+CONFIG_MTD_ROOTFS_SPLIT=y
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_UBI is not set
+CONFIG_MTD=y
+# CONFIG_MVSWITCH_PHY is not set
+# CONFIG_MWAVE is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_NET_9P is not set
+# CONFIG_NET_ACT_GACT is not set
+# CONFIG_NET_ACT_IPT is not set
+# CONFIG_NET_ACT_MIRRED is not set
+# CONFIG_NET_ACT_NAT is not set
+# CONFIG_NET_ACT_PEDIT is not set
+CONFIG_NET_ACT_POLICE=y
+# CONFIG_NET_ACT_SIMP is not set
+CONFIG_NET_CLS_ACT=y
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_CLS_FW is not set
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_CLS_POLICE=y
+# CONFIG_NET_CLS_ROUTE4 is not set
+CONFIG_NET_CLS_ROUTE=y
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_U32 is not set
+CONFIG_NET_CLS=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETDEBUG is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NET_EMATCH_CMP is not set
+# CONFIG_NET_EMATCH_META is not set
+# CONFIG_NET_EMATCH_NBYTE is not set
+CONFIG_NET_EMATCH_STACK=32
+# CONFIG_NET_EMATCH_TEXT is not set
+# CONFIG_NET_EMATCH_U32 is not set
+CONFIG_NET_EMATCH=y
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_ETHERNET=y
+# CONFIG_NET_FC is not set
+CONFIG_NETFILTER_ADVANCED=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG is not set
+# CONFIG_NETFILTER_XT_MATCH_LAYER7 is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATE is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER=y
+CONFIG_NET_IPGRE_BROADCAST=y
+# CONFIG_NET_IPGRE is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_NET_KEY is not set
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_NET_PCI=y
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_NETPOLL is not set
+CONFIG_NET_RADIO=y
+# CONFIG_NETROM is not set
+# CONFIG_NET_SB1000 is not set
+# CONFIG_NET_SCH_ATM is not set
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_DSMARK is not set
+CONFIG_NET_SCHED=y
+# CONFIG_NET_SCH_ESFQ is not set
+CONFIG_NET_SCH_ESFQ_NFCT=y
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_INGRESS is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_RR is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_TULIP is not set
+CONFIG_NET_WIRELESS_RTNETLINK=y
+CONFIG_NET_WIRELESS=y
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETXEN_NIC is not set
+CONFIG_NET=y
+# CONFIG_NEW_GPIO is not set
+CONFIG_NEW_LEDS=y
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_ENABLED=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_FTP is not set
+# CONFIG_NF_CONNTRACK_H323 is not set
+# CONFIG_NF_CONNTRACK_IPV4 is not set
+# CONFIG_NF_CONNTRACK_IPV6 is not set
+# CONFIG_NF_CONNTRACK_IRC is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_NF_CONNTRACK_RTSP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_NF_CONNTRACK_TFTP is not set
+CONFIG_NF_CT_ACCT=y
+# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NF_CT_PROTO_GRE is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_FTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_IRC is not set
+# CONFIG_NF_NAT is not set
+CONFIG_NF_NAT_NEEDED=y
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_PROTO_GRE is not set
+# CONFIG_NF_NAT_RTSP is not set
+# CONFIG_NF_NAT_SIP is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NFS_ACL_SUPPORT is not set
+CONFIG_NFS_COMMON=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V2_ACL is not set
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V4 is not set
+# CONFIG_NFS_FS is not set
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFTL is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_NORTEL_HERMES is not set
+# CONFIG_NOZOMI is not set
+# CONFIG_NS83820 is not set
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_FS is not set
+# CONFIG_NTFS_RW is not set
+# CONFIG_NVRAM is not set
+# CONFIG_OCF_BENCH is not set
+# CONFIG_OCF_C7108 is not set
+# CONFIG_OCF_CRYPTOCTEON is not set
+# CONFIG_OCF_EP80579 is not set
+# CONFIG_OCF_HIFNHIPP is not set
+# CONFIG_OCF_HIFN is not set
+# CONFIG_OCF_IXP4XX is not set
+# CONFIG_OCF_KIRKWOOD is not set
+# CONFIG_OCF_OCF is not set
+# CONFIG_OCF_OCFNULL is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_OCF_SAFE is not set
+# CONFIG_OCF_TALITOS is not set
+# CONFIG_OSF_PARTITION is not set
+CONFIG_PACKET_MMAP=y
+CONFIG_PACKET=y
+# CONFIG_PAGE_SIZE_16KB is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PARPORT_PC is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CS5535 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_ISAPNP is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_QDI is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_WINBOND_VLB is not set
+# CONFIG_PC300TOO is not set
+# CONFIG_PCCARD is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_PCI is not set
+# CONFIG_PCI_ATMEL is not set
+# CONFIG_PCI_HERMES is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_ATMEL is not set
+# CONFIG_PCMCIA_DEBUG is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_HERMES is not set
+# CONFIG_PCMCIA_IOCTL is not set
+# CONFIG_PCMCIA is not set
+# CONFIG_PCMCIA_LOAD_CIS is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_PCMCIA_SPECTRUM is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PCNET32 is not set
+# CONFIG_PCSPKR_PLATFORM is not set
+# CONFIG_PD6729 is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_PHANTOM is not set
+# CONFIG_PHONE is not set
+# CONFIG_PHYLIB is not set
+# CONFIG_PID_NS is not set
+CONFIG_PLIST=y
+# CONFIG_PLX_HERMES is not set
+# CONFIG_PM is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_DEFLATE is not set
+CONFIG_PPP_FILTER=y
+# CONFIG_PPP is not set
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPPOATM is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_PRINTK=y
+# CONFIG_PRISM54 is not set
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROFILING is not set
+# CONFIG_QEMU is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_R3964 is not set
+# CONFIG_R8169 is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+# CONFIG_RAID_ATTRS is not set
+CONFIG_RAMFS=y
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_RELAY is not set
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_RFKILL is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_ROSE is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_RTC_DEBUG is not set
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_PCF50606 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+CONFIG_RTC_HCTOSYS=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTL8187 is not set
+CONFIG_RT_MUTEXES=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_S2IO is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SC92031 is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_ESP_CORE is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_SCSI_LPFC is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_PAS16 is not set
+CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+# CONFIG_SCSI_SEAGATE is not set
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_ULTRASTOR is not set
+CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SECCOMP is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_APPLESMC is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_CORETEMP is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCHMD is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_HDAPS is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_K8TEMP is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_SERIAL_UARTLITE is not set
+# CONFIG_SERIO is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_SHAPER is not set
+CONFIG_SHMEM=y
+CONFIG_SIGNALFD=y
+# CONFIG_SIS190 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+CONFIG_SLAB=y
+# CONFIG_SLHC is not set
+# CONFIG_SLIP is not set
+# CONFIG_SLOB is not set
+# CONFIG_SLUB is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMP is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+# CONFIG_SND_AD1816A is not set
+# CONFIG_SND_AD1848 is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ADLIB is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ALS100 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT2320 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMI8330 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_CS4231 is not set
+# CONFIG_SND_CS4232 is not set
+# CONFIG_SND_CS4236 is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_DT019X is not set
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1688 is not set
+# CONFIG_SND_ES18XX is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_ES968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_GUSCLASSIC is not set
+# CONFIG_SND_GUSEXTREME is not set
+# CONFIG_SND_GUSMAX is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_HWDEP is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_INTERWAVE is not set
+# CONFIG_SND_INTERWAVE_STB is not set
+# CONFIG_SND is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_MIRO is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_OPL3SA2 is not set
+# CONFIG_SND_OPTI92X_AD1848 is not set
+# CONFIG_SND_OPTI92X_CS4231 is not set
+# CONFIG_SND_OPTI93X is not set
+CONFIG_SND_OSSEMUL=y
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_PCM is not set
+# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_PDAUDIOCF is not set
+# CONFIG_SND_RAWMIDI is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RTCTIMER is not set
+# CONFIG_SND_SB16 is not set
+# CONFIG_SND_SB8 is not set
+# CONFIG_SND_SBAWE is not set
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_SGALAXY is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_SSCAPE is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_TIMER is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_USX2Y is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_WAVEFRONT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_SOUND is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_DEBUG is not set
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_SQUASHFS_VMALLOC is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SSB_DEBUG is not set
+# CONFIG_SSB_DRIVER_MIPS is not set
+# CONFIG_SSB is not set
+# CONFIG_SSB_PCMCIAHOST is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSFDC is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_STANDALONE=y
+# CONFIG_STRIP is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_GSS is not set
+# CONFIG_SUNRPC is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SWAP=y
+# CONFIG_SYNCLINK_CS is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL=y
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_SYSFS=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_SYSV_FS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_SYSVIPC=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_CUBIC is not set
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_VENO is not set
+CONFIG_TCP_CONG_WESTWOOD=y
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_TEXTSEARCH_BM is not set
+# CONFIG_TEXTSEARCH_FSM is not set
+# CONFIG_TEXTSEARCH_KMP is not set
+CONFIG_TEXTSEARCH=y
+# CONFIG_THERMAL is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_TIFM_CORE is not set
+# CONFIG_TIGON3 is not set
+CONFIG_TIMERFD=y
+# CONFIG_TINY_SHMEM is not set
+# CONFIG_TIPC is not set
+# CONFIG_TLAN is not set
+# CONFIG_TMD_HERMES is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_TMPFS=y
+# CONFIG_TPS65010 is not set
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_TR is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_TUNER_TEA5761 is not set
+# CONFIG_TUN is not set
+# CONFIG_UDF_FS is not set
+CONFIG_UDF_NLS=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_UFS_FS is not set
+# CONFIG_UIO is not set
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+CONFIG_UNIX=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AIPTEK is not set
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_APPLETOUCH is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATM is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_BELKIN=y
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_CXACRU is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_DABUSB is not set
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_ET61X251 is not set
+CONFIG_USB_EZUSB=y
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_USB_HIDDEV is not set
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HID is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_KC2190 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LIBUSUAL is not set
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_NET_AX8817X is not set
+# CONFIG_USB_NET_CDCETHER is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_OHCI_HCD_SSB is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_SPEEDTOUCH is not set
+# CONFIG_USB_STKWEBCAM is not set
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_DATAFAB=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_FREECOM=y
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE is not set
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_KARMA=y
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_USBAT=y
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_UEAGLEATM is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_W9968CF is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_XUSBATM is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_VETH is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT848 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_CAFE_CCIC is not set
+# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_CX2341X is not set
+# CONFIG_VIDEO_CX25840 is not set
+# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_DPC is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_IVTV is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_MXB is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_VIDEO_PMS is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA7111 is not set
+# CONFIG_VIDEO_SAA7114 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7134 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_USBVISION is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_VIDEO_V4L1 is not set
+CONFIG_VIDEO_V4L2=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+# CONFIG_VIDEO_VPX3220 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_ZORAN is not set
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_VITESSE_PHY is not set
+CONFIG_VLAN_8021Q=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_VT is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_W1 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS2490 is not set
+# CONFIG_W1_MASTER_GPIO is not set
+# CONFIG_W1_MASTER_MATROX is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W83627HF_WDT is not set
+# CONFIG_W83697HF_WDT is not set
+# CONFIG_W83877F_WDT is not set
+# CONFIG_W83977F_WDT is not set
+# CONFIG_WAN is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WDTPCI is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WLAN_80211=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_X25 is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_USER is not set
+CONFIG_XFRM=y
+# CONFIG_XFS_FS is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_YAM is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_YENTA is not set
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+# CONFIG_YENTA_TI is not set
+# CONFIG_YENTA_TOSHIBA is not set
+# CONFIG_ZD1211RW_DEBUG is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_ZISOFS_FS is not set
+CONFIG_ZISOFS=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ZONE_DMA=y
diff --git a/target/linux/generic/config-2.6.30 b/target/linux/generic/config-2.6.30
new file mode 100644
index 0000000000..b2ced18a9a
--- /dev/null
+++ b/target/linux/generic/config-2.6.30
@@ -0,0 +1,2683 @@
+# CONFIG_6PACK is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_9P_FS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_ACENIC is not set
+# CONFIG_ACER_WMI is not set
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_ADFS_FS is not set
+# CONFIG_ADM6996_PHY is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_AGP is not set
+CONFIG_AIO=y
+# CONFIG_AIRO_CS is not set
+# CONFIG_AIRO is not set
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_AMIGA_PARTITION is not set
+CONFIG_ANON_INODES=y
+# CONFIG_APPLICOM is not set
+# CONFIG_AR8216_PHY is not set
+# CONFIG_AR9170_USB is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCNET is not set
+# CONFIG_ARM_UNWIND is not set
+CONFIG_ARPD=y
+# CONFIG_ARTHUR is not set
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_ASUS_OLED is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_AT24 is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_ATA_ACPI is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_ATA is not set
+# CONFIG_ATALK is not set
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_ATA_SFF=y
+# CONFIG_ATH5K is not set
+# CONFIG_ATH9K is not set
+# CONFIG_ATL1C is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL2 is not set
+# CONFIG_ATM_AMBASSADOR is not set
+CONFIG_ATM_BR2684_IPFILTER=y
+# CONFIG_ATM_BR2684 is not set
+# CONFIG_ATM_CLIP is not set
+CONFIG_ATM_CLIP_NO_ICMP=y
+# CONFIG_ATM_DRIVERS is not set
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATMEL is not set
+# CONFIG_ATM_ENI is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_FORE200E is not set
+# CONFIG_ATM_FORE200E_MAYBE is not set
+# CONFIG_ATM_HE is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_IA is not set
+# CONFIG_ATM_IDT77252 is not set
+# CONFIG_ATM is not set
+# CONFIG_ATM_LANAI is not set
+# CONFIG_ATM_LANE is not set
+# CONFIG_ATM_MPOA is not set
+# CONFIG_ATM_NICSTAR is not set
+# CONFIG_ATM_SOLOS is not set
+# CONFIG_ATM_TCP is not set
+# CONFIG_ATM_ZATM is not set
+# CONFIG_AUDIT is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_AX25_DAMA_SLAVE is not set
+# CONFIG_AX25 is not set
+# CONFIG_AX88796 is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_B44 is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+CONFIG_BASE_FULL=y
+CONFIG_BASE_SMALL=0
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BATTERY_BQ27000_HDQ is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_GOLDFISH is not set
+# CONFIG_BATTERY_OLPC is not set
+# CONFIG_BAYCOM_EPP is not set
+# CONFIG_BAYCOM_PAR is not set
+# CONFIG_BAYCOM_SER_FDX is not set
+# CONFIG_BAYCOM_SER_HDX is not set
+CONFIG_BCM43XX_DEBUG=y
+CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
+# CONFIG_BCM43XX_DMA_MODE is not set
+CONFIG_BCM43XX_DMA=y
+# CONFIG_BCM43XX is not set
+# CONFIG_BCM43XX_PIO_MODE is not set
+CONFIG_BCM43XX_PIO=y
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_BLINK is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_ATIIXP is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_CMD640 is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_CS5535 is not set
+# CONFIG_BLK_DEV_CS5536 is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_DELKIN is not set
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_HD_IDE is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_BLK_DEV_HD_ONLY is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_IDEACPI is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_RZ1000 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SIS5513 is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_BLK_DEV=y
+CONFIG_BLOCK=y
+# CONFIG_BNX2 is not set
+# CONFIG_BONDING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_BPQETHER is not set
+# CONFIG_BRIDGE_EBT_802_3 is not set
+# CONFIG_BRIDGE_EBT_AMONG is not set
+# CONFIG_BRIDGE_EBT_ARP is not set
+# CONFIG_BRIDGE_EBT_ARPREPLY is not set
+# CONFIG_BRIDGE_EBT_BROUTE is not set
+# CONFIG_BRIDGE_EBT_DNAT is not set
+# CONFIG_BRIDGE_EBT_IP6 is not set
+# CONFIG_BRIDGE_EBT_IP is not set
+# CONFIG_BRIDGE_EBT_LIMIT is not set
+# CONFIG_BRIDGE_EBT_LOG is not set
+# CONFIG_BRIDGE_EBT_MARK is not set
+# CONFIG_BRIDGE_EBT_MARK_T is not set
+# CONFIG_BRIDGE_EBT_NFLOG is not set
+# CONFIG_BRIDGE_EBT_PKTTYPE is not set
+# CONFIG_BRIDGE_EBT_REDIRECT is not set
+# CONFIG_BRIDGE_EBT_SNAT is not set
+# CONFIG_BRIDGE_EBT_STP is not set
+# CONFIG_BRIDGE_EBT_T_FILTER is not set
+# CONFIG_BRIDGE_EBT_T_NAT is not set
+# CONFIG_BRIDGE_EBT_ULOG is not set
+# CONFIG_BRIDGE_EBT_VLAN is not set
+# CONFIG_BRIDGE_NETFILTER is not set
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+CONFIG_BRIDGE=y
+# CONFIG_BROADCOM_PHY is not set
+CONFIG_BROKEN_ON_SMP=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BT_BNEP is not set
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+# CONFIG_BT_CMTP is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIDTL1 is not set
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIUSB is not set
+CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_HIDP is not set
+# CONFIG_BT is not set
+# CONFIG_BT_L2CAP is not set
+# CONFIG_BT_RFCOMM is not set
+CONFIG_BT_RFCOMM_TTY=y
+# CONFIG_BTRFS_FS is not set
+# CONFIG_BT_SCO is not set
+CONFIG_BUG=y
+# CONFIG_C2PORT is not set
+# CONFIG_CAN is not set
+# CONFIG_CAPI_AVM is not set
+# CONFIG_CAPI_EICON is not set
+# CONFIG_CAPI_TRACE is not set
+CONFIG_CARDBUS=y
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_CASSINI is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_CFG80211 is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_CIFS is not set
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+CONFIG_CLASSIC_RCU=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_CLS_U32_PERF=y
+CONFIG_CMDLINE=""
+# CONFIG_CODA_FS is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_COPS is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CROSSCOMPILE=y
+# CONFIG_CRYPTO_AEAD is not set
+# CONFIG_CRYPTO_AES_586 is not set
+# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_ALGAPI=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_BLKCIPHER is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRC32C_INTEL is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_HASH is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCBC is not set
+CONFIG_CRYPTO_PCOMP=y
+# CONFIG_CRYPTO_PRNG is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_RNG is not set
+# CONFIG_CRYPTO_SALSA20_586 is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_TWOFISH_586 is not set
+# CONFIG_CRYPTO_TWOFISH_COMMON is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+CONFIG_CRYPTO_UNLZMA=y
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ZLIB=y
+# CONFIG_DAB is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_DCB is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DECNET is not set
+CONFIG_DECOMPRESS_LZMA_NEEDED=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_BIC is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_CUBIC is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_HTCP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_DEFAULT_NOOP is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="westwood"
+# CONFIG_DEFAULT_VEGAS is not set
+CONFIG_DEFAULT_WESTWOOD=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_DGRS is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DL2K is not set
+# CONFIG_DLM is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_DMA_ENGINE is not set
+# CONFIG_DMASCC is not set
+# CONFIG_DMATEST is not set
+# CONFIG_DNET is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_DRM is not set
+# CONFIG_DS1682 is not set
+# CONFIG_DTLK is not set
+# CONFIG_DUMMY is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DVB is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000 is not set
+# CONFIG_E100 is not set
+# CONFIG_ECONET is not set
+# CONFIG_EDAC is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_ELF_CORE is not set
+CONFIG_EMBEDDED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_EPIC100 is not set
+CONFIG_EPOLL=y
+# CONFIG_EQUALIZER is not set
+# CONFIG_ETHOC is not set
+CONFIG_EVENTFD=y
+# CONFIG_EVENT_TRACER is not set
+CONFIG_EXPERIMENTAL=y
+# CONFIG_EXPORTFS is not set
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_EXT4DEV_COMPAT is not set
+CONFIG_EXTRA_FIRMWARE=""
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_FAIR_GROUP_SCHED is not set
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_FAT_FS is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_ARC is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_COBALT is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_EARLYSUSPEND is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_GEODE is not set
+# CONFIG_FB_GOLDFISH is not set
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_LE80578 is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_N411 is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_PS3 is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_S3C2410 is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_TMIO is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_VESA is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FCOE_FNIC is not set
+# CONFIG_FCOE is not set
+# CONFIG_FDDI is not set
+# CONFIG_FEALNX is not set
+CONFIG_FIB_RULES=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_FIREWIRE is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_FORCEDETH is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_FREEZER is not set
+# CONFIG_FSCACHE is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FTL is not set
+# CONFIG_FTRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_FUSE_FS is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SAS is not set
+# CONFIG_FUSION_SPI is not set
+CONFIG_FUTEX=y
+CONFIG_FW_LOADER=y
+CONFIG_GACT_PROB=y
+# CONFIG_GAMEPORT is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_TIME=y
+# CONFIG_GIGASET_DEBUG is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_DEVICE is not set
+# CONFIG_GPIOLIB is not set
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SYSFS is not set
+# CONFIG_GPIO_XILINX is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_HAMACHI is not set
+CONFIG_HAMRADIO=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_HCALL_STATS is not set
+# CONFIG_HDLC_CISCO is not set
+# CONFIG_HDLC_FR is not set
+# CONFIG_HDLC is not set
+# CONFIG_HDLC_PPP is not set
+# CONFIG_HDLC_RAW_ETH is not set
+# CONFIG_HDLC_RAW is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_HERMES is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_BRIGHT is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_COMPAT is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HID_DELL is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_FF is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PID is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_HIGH_RES_TIMERS=y
+# CONFIG_HIPPI is not set
+# CONFIG_HOSTAP_CS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_HOSTAP_PCI is not set
+# CONFIG_HOSTAP_PLX is not set
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_HOTPLUG_PCI is not set
+CONFIG_HOTPLUG=y
+# CONFIG_HP100 is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_HVC_UDBG is not set
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+# CONFIG_HW_RANDOM_AMD is not set
+# CONFIG_HW_RANDOM_GEODE is not set
+# CONFIG_HW_RANDOM_INTEL is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_HW_RANDOM_VIA is not set
+# CONFIG_HYSDN is not set
+CONFIG_HZ=100
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_1024 is not set
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_48 is not set
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCA is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_CHARDEV is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_ELEKTOR is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_HELPER_AUTO is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_IBM_IIC is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2O is not set
+# CONFIG_I82092 is not set
+# CONFIG_I82365 is not set
+# CONFIG_IBM_ASM is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_IDE_GD is not set
+# CONFIG_IDE is not set
+CONFIG_IDE_MAX_HWIFS=4
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_IDE_PHISON is not set
+CONFIG_IDE_PROC_FS=y
+# CONFIG_IDE_TASK_IOCTL is not set
+# CONFIG_IEEE1394_DV1394 is not set
+# CONFIG_IEEE1394_ETH1394 is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_IEEE1394_OHCI1394 is not set
+# CONFIG_IEEE1394_PCILYNX is not set
+# CONFIG_IEEE1394_RAWIO is not set
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+# CONFIG_IEEE1394_VIDEO1394 is not set
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_IEEE80211_CRYPT_WEP is not set
+# CONFIG_IEEE80211_DEBUG is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_IEEE80211_SOFTMAC is not set
+# CONFIG_IFB is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_IKCONFIG_PROC is not set
+# CONFIG_IMAGE_CMDLINE_HACK is not set
+# CONFIG_IMQ_BEHAVIOR_AA is not set
+# CONFIG_IMQ_BEHAVIOR_AB is not set
+# CONFIG_IMQ_BEHAVIOR_BA is not set
+# CONFIG_IMQ_BEHAVIOR_BB is not set
+# CONFIG_IMQ is not set
+CONFIG_IMQ_NUM_DEVS=2
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_TCP_DIAG is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET=y
+# CONFIG_INFINIBAND is not set
+# CONFIG_INFTL is not set
+CONFIG_INIT_ENV_ARG_LIMIT=32
+# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
+# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
+CONFIG_INITRAMFS_COMPRESSION_NONE=y
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_INPUT_APANEL is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATLAS_BTNS is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_MIMIO is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_PCSPKR is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_WISTRON_BTNS is not set
+# CONFIG_INSTRUMENTATION is not set
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IP1000 is not set
+# CONFIG_IP17XX_PHY is not set
+# CONFIG_IP6_NF_FILTER is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP6_NF_MANGLE is not set
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
+# CONFIG_IP6_NF_MATCH_LIMIT is not set
+# CONFIG_IP6_NF_MATCH_MH is not set
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_OWNER is not set
+# CONFIG_IP6_NF_MATCH_RT is not set
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_RAW is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+# CONFIG_IP6_NF_TARGET_IMQ is not set
+# CONFIG_IP6_NF_TARGET_LOG is not set
+# CONFIG_IP6_NF_TARGET_REJECT is not set
+# CONFIG_IP6_NF_TARGET_ROUTE is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IPC_NS is not set
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_MULTIPLE_TABLES=y
+# CONFIG_IP_NF_AMANDA is not set
+# CONFIG_IP_NF_ARPFILTER is not set
+# CONFIG_IP_NF_ARP_MANGLE is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK=y
+CONFIG_IP_NF_CT_ACCT=y
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+# CONFIG_IP_NF_FILTER is not set
+# CONFIG_IP_NF_FTP is not set
+# CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_IRC is not set
+# CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+# CONFIG_IP_NF_MATCH_IPP2P is not set
+# CONFIG_IP_NF_MATCH_OWNER is not set
+# CONFIG_IP_NF_MATCH_RECENT is not set
+# CONFIG_IP_NF_MATCH_SET is not set
+# CONFIG_IP_NF_MATCH_TIME is not set
+# CONFIG_IP_NF_MATCH_TOS is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+# CONFIG_IP_NF_NAT_AMANDA is not set
+# CONFIG_IP_NF_NAT_FTP is not set
+# CONFIG_IP_NF_NAT_H323 is not set
+# CONFIG_IP_NF_NAT_IRC is not set
+CONFIG_IP_NF_NAT_NEEDED=y
+# CONFIG_IP_NF_NAT_PPTP is not set
+# CONFIG_IP_NF_NAT_SIP is not set
+# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
+# CONFIG_IP_NF_NAT_TFTP is not set
+CONFIG_IP_NF_NAT=y
+# CONFIG_IP_NF_NETBIOS_NS is not set
+# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_SECURITY is not set
+CONFIG_IP_NF_SET_HASHSIZE=1024
+# CONFIG_IP_NF_SET_IPHASH is not set
+# CONFIG_IP_NF_SET_IPMAP is not set
+# CONFIG_IP_NF_SET_IPPORTHASH is not set
+# CONFIG_IP_NF_SET_IPTREE is not set
+# CONFIG_IP_NF_SET_IPTREEMAP is not set
+# CONFIG_IP_NF_SET is not set
+# CONFIG_IP_NF_SET_MACIPMAP is not set
+CONFIG_IP_NF_SET_MAX=256
+# CONFIG_IP_NF_SET_NETHASH is not set
+# CONFIG_IP_NF_SET_PORTMAP is not set
+# CONFIG_IP_NF_SIP is not set
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_IMQ is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_MASQUERADE is not set
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_IP_NF_TARGET_REJECT is not set
+# CONFIG_IP_NF_TARGET_ROUTE is not set
+# CONFIG_IP_NF_TARGET_SAME is not set
+# CONFIG_IP_NF_TARGET_SET is not set
+# CONFIG_IP_NF_TARGET_TOS is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+# CONFIG_IP_NF_TFTP is not set
+# CONFIG_IP_PIMSM_V1 is not set
+# CONFIG_IP_PIMSM_V2 is not set
+# CONFIG_IP_PNP is not set
+CONFIG_IP_ROUTE_FWMARK=y
+CONFIG_IP_ROUTE_MULTIPATH_CACHED=y
+# CONFIG_IP_ROUTE_MULTIPATH_DRR is not set
+# CONFIG_IP_ROUTE_MULTIPATH_RANDOM is not set
+# CONFIG_IP_ROUTE_MULTIPATH_RR is not set
+# CONFIG_IP_ROUTE_MULTIPATH_WRANDOM is not set
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_SCTP is not set
+CONFIG_IPSEC_NAT_TRAVERSAL=y
+# CONFIG_IPV6 is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTE_INFO is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IP_VS is not set
+# CONFIG_IPW2100_DEBUG is not set
+# CONFIG_IPW2100 is not set
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2200_DEBUG is not set
+# CONFIG_IPW2200 is not set
+CONFIG_IPW2200_MONITOR=y
+# CONFIG_IPW2200_PROMISCUOUS is not set
+# CONFIG_IPW2200_QOS is not set
+# CONFIG_IPW2200_RADIOTAP is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_IPX is not set
+# CONFIG_IRDA is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_ISCSI_TCP is not set
+CONFIG_ISDN=y
+# CONFIG_ISDN_AUDIO is not set
+# CONFIG_ISDN_CAPI_CAPIDRV is not set
+# CONFIG_ISDN_DIVERSION is not set
+# CONFIG_ISDN_DRV_ACT2000 is not set
+# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set
+# CONFIG_ISDN_DRV_EICON is not set
+# CONFIG_ISDN_DRV_HISAX is not set
+# CONFIG_ISDN_DRV_ICN is not set
+# CONFIG_ISDN_DRV_LOOP is not set
+# CONFIG_ISDN_DRV_PCBIT is not set
+# CONFIG_ISDN_DRV_SC is not set
+# CONFIG_ISDN_DRV_TPAM is not set
+# CONFIG_ISDN_WITH_ABC is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_ISO9660_FS is not set
+# CONFIG_IWL3945 is not set
+# CONFIG_IWLAGN is not set
+# CONFIG_IWLCORE is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_IXGB is not set
+# CONFIG_JBD2_DEBUG is not set
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_JBD is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_FS=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_STATISTICS is not set
+# CONFIG_JME is not set
+CONFIG_JOLIET=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_GZIP is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KEXEC is not set
+# CONFIG_KEYS is not set
+# CONFIG_KGDB is not set
+# CONFIG_KMEMTRACE is not set
+CONFIG_KMOD=y
+# CONFIG_KPROBES is not set
+# CONFIG_LANMEDIA is not set
+# CONFIG_LAPB is not set
+# CONFIG_LASAT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_LBD=y
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_LEDS_ALIX is not set
+# CONFIG_LEDS_BD2802 is not set
+CONFIG_LEDS_CLASS=y
+# CONFIG_LEDS_DAC124S085 is not set
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+# CONFIG_LEDS_TRIGGER_MORSE is not set
+CONFIG_LEDS_TRIGGER_NETDEV=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_LIB80211_CRYPT_CCMP is not set
+# CONFIG_LIB80211_CRYPT_TKIP is not set
+# CONFIG_LIB80211_CRYPT_WEP is not set
+# CONFIG_LIB80211_DEBUG is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_LIBCRC32C is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_LIBERTAS_USB is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_LIBIPW_DEBUG is not set
+# CONFIG_LINE6_USB is not set
+# CONFIG_LLC2 is not set
+CONFIG_LLC=y
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_LOCKD is not set
+CONFIG_LOCKD_V4=y
+# CONFIG_LOCK_STAT is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LSF is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_LTPC is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_MAC_EMUMOUSEBTN is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MARKERS is not set
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_MD is not set
+# CONFIG_MEDIA_ATTACH is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MIGRATION is not set
+CONFIG_MII=y
+CONFIG_MINI_FO=y
+# CONFIG_MINIX_FS is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_MIPS_FPU_EMU is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_MISDN_HFCPCI is not set
+# CONFIG_MISDN_HFCUSB is not set
+# CONFIG_MISDN is not set
+# CONFIG_MKISS is not set
+# CONFIG_MMC_ARMMMCI is not set
+# CONFIG_MMC_ATMELMCI is not set
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_MMC_BLOCK is not set
+# CONFIG_MMC_BLOCK_PARANOID_RESUME is not set
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_EMBEDDED_SDIO is not set
+# CONFIG_MMC is not set
+# CONFIG_MMC_MVSDIO is not set
+# CONFIG_MMC_PARANOID_SD_INIT is not set
+# CONFIG_MMC_S3C is not set
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SDHCI_PCI is not set
+# CONFIG_MMC_SDRICOH_CS is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_TEST is not set
+# CONFIG_MMC_TIFM_SD is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_WBSD is not set
+CONFIG_MMU=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_MSDOS_FS is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_AR7_PARTS is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_BLKDEVS=y
+# CONFIG_MTD_BLOCK2MTD is not set
+CONFIG_MTD_BLOCK=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_JEDECPROBE is not set
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_MYLOADER_PARTS is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_OOPS is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_ROM is not set
+CONFIG_MTD_ROOTFS_ROOT_DEV=y
+CONFIG_MTD_ROOTFS_SPLIT=y
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_UBI is not set
+CONFIG_MTD=y
+# CONFIG_MVSWITCH_PHY is not set
+# CONFIG_MWAVE is not set
+# CONFIG_MWL8K is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_NET_9P is not set
+# CONFIG_NET_ACT_GACT is not set
+# CONFIG_NET_ACT_IPT is not set
+# CONFIG_NET_ACT_MIRRED is not set
+# CONFIG_NET_ACT_NAT is not set
+# CONFIG_NET_ACT_PEDIT is not set
+# CONFIG_NET_ACT_POLICE is not set
+# CONFIG_NET_ACT_SIMP is not set
+CONFIG_NET_ACT_SKBEDIT=y
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_CLS_BASIC=y
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_CLS_FW is not set
+CONFIG_NET_CLS_IND=y
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_U32 is not set
+CONFIG_NET_CLS=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETDEBUG is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEVICES_MULTIQUEUE=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_NET_EMATCH_CMP is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_EMATCH_META is not set
+# CONFIG_NET_EMATCH_NBYTE is not set
+CONFIG_NET_EMATCH_STACK=32
+# CONFIG_NET_EMATCH_TEXT is not set
+# CONFIG_NET_EMATCH_U32 is not set
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_ETHERNET=y
+# CONFIG_NET_FC is not set
+CONFIG_NETFILTER_ADVANCED=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_TPROXY is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG is not set
+# CONFIG_NETFILTER_XT_MATCH_LAYER7 is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATE is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
+# CONFIG_NETFILTER_XT_TARGET_IMQ is not set
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER=y
+CONFIG_NET_IPGRE_BROADCAST=y
+# CONFIG_NET_IPGRE is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_NET_KEY is not set
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_NET_PCI=y
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_NETPOLL is not set
+CONFIG_NET_RADIO=y
+# CONFIG_NETROM is not set
+# CONFIG_NET_SB1000 is not set
+# CONFIG_NET_SCH_ATM is not set
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_DRR is not set
+# CONFIG_NET_SCH_DSMARK is not set
+CONFIG_NET_SCHED=y
+# CONFIG_NET_SCH_ESFQ is not set
+CONFIG_NET_SCH_ESFQ_NFCT=y
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_INGRESS is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_RR is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_NET_WIRELESS_RTNETLINK=y
+CONFIG_NET_WIRELESS=y
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETXEN_NIC is not set
+CONFIG_NET=y
+# CONFIG_NEW_GPIO is not set
+CONFIG_NEW_LEDS=y
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_ENABLED=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_FTP is not set
+# CONFIG_NF_CONNTRACK_H323 is not set
+# CONFIG_NF_CONNTRACK_IPV4 is not set
+# CONFIG_NF_CONNTRACK_IPV6 is not set
+# CONFIG_NF_CONNTRACK_IRC is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_NF_CONNTRACK_RTSP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_NF_CONNTRACK_TFTP is not set
+# CONFIG_NF_CT_ACCT is not set
+# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_GRE is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_FTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_IRC is not set
+# CONFIG_NF_NAT is not set
+CONFIG_NF_NAT_NEEDED=y
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_PROTO_GRE is not set
+# CONFIG_NF_NAT_RTSP is not set
+# CONFIG_NF_NAT_SIP is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NFS_ACL_SUPPORT is not set
+CONFIG_NFS_COMMON=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V2_ACL is not set
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V4 is not set
+# CONFIG_NFS_FS is not set
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFTL is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NL80211=y
+CONFIG_NLATTR=y
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_NORTEL_HERMES is not set
+# CONFIG_NOZOMI is not set
+# CONFIG_NS83820 is not set
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_FS is not set
+# CONFIG_NTFS_RW is not set
+# CONFIG_NVRAM is not set
+# CONFIG_OCF_BENCH is not set
+# CONFIG_OCF_C7108 is not set
+# CONFIG_OCF_CRYPTOCTEON is not set
+# CONFIG_OCF_EP80579 is not set
+# CONFIG_OCF_HIFNHIPP is not set
+# CONFIG_OCF_HIFN is not set
+# CONFIG_OCF_IXP4XX is not set
+# CONFIG_OCF_KIRKWOOD is not set
+# CONFIG_OCF_OCF is not set
+# CONFIG_OCF_OCFNULL is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_OCF_SAFE is not set
+# CONFIG_OCF_TALITOS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_P54_COMMON is not set
+CONFIG_PACKET_MMAP=y
+CONFIG_PACKET=y
+# CONFIG_PAGE_POISONING is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PANTHERLORD_FF is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PARPORT_PC is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CS5535 is not set
+# CONFIG_PATA_CS5536 is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_ISAPNP is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_QDI is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_WINBOND_VLB is not set
+# CONFIG_PC300TOO is not set
+# CONFIG_PCCARD is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_PCI is not set
+# CONFIG_PCI200SYN is not set
+# CONFIG_PCI_ATMEL is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_DISABLE_COMMON_QUIRKS is not set
+# CONFIG_PCIEASPM is not set
+# CONFIG_PCI_HERMES is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCIPCWATCHDOG is not set
+CONFIG_PCI_QUIRKS=y
+# CONFIG_PCI_STUB is not set
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_ATMEL is not set
+# CONFIG_PCMCIA_DEBUG is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_HERMES is not set
+# CONFIG_PCMCIA_IOCTL is not set
+# CONFIG_PCMCIA is not set
+# CONFIG_PCMCIA_LOAD_CIS is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_PCMCIA_SPECTRUM is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PCMCIA_XIRCOM is not set
+# CONFIG_PCNET32 is not set
+# CONFIG_PCSPKR_PLATFORM is not set
+# CONFIG_PD6729 is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_PHANTOM is not set
+# CONFIG_PHONE is not set
+# CONFIG_PHONET is not set
+# CONFIG_PHYLIB is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+# CONFIG_PID_NS is not set
+CONFIG_PLIST=y
+# CONFIG_PLX_HERMES is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PM is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_PPC_4K_PAGES=y
+CONFIG_PPC4xx_GPIO=y
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_DEFLATE is not set
+CONFIG_PPP_FILTER=y
+# CONFIG_PPP is not set
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPPOATM is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_PRINTK=y
+# CONFIG_PRISM54 is not set
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROFILING is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_QEMU is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_R3964 is not set
+# CONFIG_R6040 is not set
+# CONFIG_R8169 is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+# CONFIG_RAID_ATTRS is not set
+CONFIG_RAMFS=y
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_GZIP is not set
+CONFIG_RD_LZMA=y
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_RELAY is not set
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_RFKILL_INPUT is not set
+# CONFIG_RFKILL is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_ROSE is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_RTC_DEBUG is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_PCF50606 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_RTC7301 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+CONFIG_RTC_HCTOSYS=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_RTL8306_PHY is not set
+# CONFIG_RTL8366_SMI is not set
+# CONFIG_RTL8366S_PHY_DEBUG_FS is not set
+# CONFIG_RTL8366S_PHY is not set
+# CONFIG_RTL8366RB_PHY is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_RUNTIME_DEBUG is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_S2IO is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_SATA_PMP is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SC92031 is not set
+# CONFIG_SCC is not set
+# CONFIG_SCHED_BFS is not set
+CONFIG_SCHED_CFS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_ESP_CORE is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_MPT2SAS is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_SCSI_PAS16 is not set
+CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+# CONFIG_SCSI_SEAGATE is not set
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_ULTRASTOR is not set
+CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SECCOMP is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_APPLESMC is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATK0110 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_CORETEMP is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCHMD is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_HDAPS is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_K8TEMP is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_UARTLITE is not set
+# CONFIG_SERIO is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_SHAPER is not set
+CONFIG_SHMEM=y
+CONFIG_SIGNALFD=y
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2_DEBUG is not set
+# CONFIG_SKY2 is not set
+CONFIG_SLABINFO=y
+CONFIG_SLAB=y
+# CONFIG_SLHC is not set
+# CONFIG_SLIP is not set
+# CONFIG_SLOB is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_SLUB is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMC91X is not set
+# CONFIG_SMP is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_SMSC9420 is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+# CONFIG_SND_AD1816A is not set
+# CONFIG_SND_AD1848 is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ADLIB is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ALS100 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT2320 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMI8330 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_CS4231 is not set
+# CONFIG_SND_CS4232 is not set
+# CONFIG_SND_CS4236 is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
+# CONFIG_SND_CTXFI is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DT019X is not set
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1688 is not set
+# CONFIG_SND_ES18XX is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_ES968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_GUSCLASSIC is not set
+# CONFIG_SND_GUSEXTREME is not set
+# CONFIG_SND_GUSMAX is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_HWDEP is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGODJX is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_INTERWAVE is not set
+# CONFIG_SND_INTERWAVE_STB is not set
+# CONFIG_SND_ISA is not set
+# CONFIG_SND is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_LX6464ES is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_MIPS is not set
+# CONFIG_SND_MIRO is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_OPL3SA2 is not set
+# CONFIG_SND_OPTI92X_AD1848 is not set
+# CONFIG_SND_OPTI92X_CS4231 is not set
+# CONFIG_SND_OPTI93X is not set
+CONFIG_SND_OSSEMUL=y
+# CONFIG_SND_OXYGEN is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_PCMCIA is not set
+# CONFIG_SND_PCM is not set
+# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_PDAUDIOCF is not set
+# CONFIG_SND_PPC is not set
+# CONFIG_SND_RAWMIDI is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RTCTIMER is not set
+# CONFIG_SND_SB16 is not set
+# CONFIG_SND_SB8 is not set
+# CONFIG_SND_SBAWE is not set
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_SIS7019 is not set
+# CONFIG_SND_SGALAXY is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_SSCAPE is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_TIMER is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_US122L is not set
+# CONFIG_SND_USB_USX2Y is not set
+CONFIG_SND_USB=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_WAVEFRONT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_SONY_LAPTOP is not set
+# CONFIG_SONYPI is not set
+# CONFIG_SOUND is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_DEBUG is not set
+# CONFIG_SPI_GPIO_OLD is not set
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_SPI_ORION is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_SQUASHFS_LZMA=y
+CONFIG_SQUASHFS_SUPPORT_ZLIB=y
+# CONFIG_SQUASHFS_VMALLOC is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SSB_DEBUG is not set
+# CONFIG_SSB is not set
+# CONFIG_SSB_PCMCIAHOST is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSFDC is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_STACKTRACE_SUPPORT=y
+# CONFIG_STAGING is not set
+CONFIG_STANDALONE=y
+CONFIG_STDBINUTILS=y
+# CONFIG_STE10XP is not set
+CONFIG_STP=y
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_STRIP is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_GSS is not set
+# CONFIG_SUNRPC is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SWAP=y
+# CONFIG_SWCONFIG is not set
+# CONFIG_SYNCLINK_CS is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL=y
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_SYSFS=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_SYSV_FS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_SYSVIPC=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_TCIC is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_CUBIC is not set
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_VENO is not set
+CONFIG_TCP_CONG_WESTWOOD=y
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_TEXTSEARCH_BM is not set
+# CONFIG_TEXTSEARCH_FSM is not set
+# CONFIG_TEXTSEARCH_KMP is not set
+CONFIG_TEXTSEARCH=y
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_TIFM_CORE is not set
+# CONFIG_TIGON3 is not set
+CONFIG_TIMERFD=y
+# CONFIG_TINY_SHMEM is not set
+# CONFIG_TIPC is not set
+# CONFIG_TLAN is not set
+# CONFIG_TMD_HERMES is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_TMPFS=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_FILTER is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_S3C2410 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_TRANZPORT is not set
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_TR is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_TUNER_TEA5761 is not set
+# CONFIG_TUN is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_UDF_FS is not set
+CONFIG_UDF_NLS=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_UFS_FS is not set
+# CONFIG_UIO is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_UNEVICTABLE_LRU is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+CONFIG_UNIX=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AIPTEK is not set
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_APPLETOUCH is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATM is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_BELKIN=y
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_CXACRU is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_DABUSB is not set
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_ET61X251 is not set
+CONFIG_USB_EZUSB=y
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_USB_HIDDEV is not set
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HID is not set
+# CONFIG_USB_HSO is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_IP_COMMON is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_KC2190 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LIBUSUAL is not set
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_NET_AX8817X is not set
+# CONFIG_USB_NET_CDC_EEM is not set
+# CONFIG_USB_NET_CDCETHER is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_OHCI_HCD_PCI is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OHCI_HCD_PPC_SOC is not set
+# CONFIG_USB_OHCI_HCD_SSB is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_PWC_INPUT_EVDEV is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_ATEN2011 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_QUATECH_ESU100 is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_SPEEDTOUCH is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_TMC is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_UEAGLEATM is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_VICAM is not set
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+# CONFIG_USB_VIDEO_CLASS is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_W9968CF is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_WUSB_CBAF is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_XUSBATM is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_UWB is not set
+# CONFIG_VETH is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT848 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_CAFE_CCIC is not set
+# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CX231XX is not set
+# CONFIG_VIDEO_CX2341X is not set
+# CONFIG_VIDEO_CX25840 is not set
+# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_DPC is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_GO7007 is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_IVTV is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_MEDIA is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_MXB is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_VIDEO_PMS is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_SAA6588 is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA7111 is not set
+# CONFIG_VIDEO_SAA7114 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7134 is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_USBVISION is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_VIDEO_V4L1 is not set
+# CONFIG_VIDEO_V4L2_COMMON is not set
+# CONFIG_VIDEO_V4L2 is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+# CONFIG_VIDEO_VPX3220 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_ZORAN is not set
+# CONFIG_VIRQ_DEBUG is not set
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_VIRTUALIZATION is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_VLAN_8021Q_GVRP is not set
+CONFIG_VLAN_8021Q=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_VMSPLIT_1G is not set
+# CONFIG_VMSPLIT_2G is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VT is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_W1_CON is not set
+# CONFIG_W1 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS2490 is not set
+# CONFIG_W1_MASTER_GPIO is not set
+# CONFIG_W1_MASTER_MATROX is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W83627HF_WDT is not set
+# CONFIG_W83697HF_WDT is not set
+# CONFIG_W83877F_WDT is not set
+# CONFIG_W83977F_WDT is not set
+# CONFIG_WAN is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_WANXL is not set
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WDTPCI is not set
+# CONFIG_WIMAX is not set
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS=y
+CONFIG_WLAN_80211=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_X25 is not set
+# CONFIG_XFRM_IPCOMP is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_USER is not set
+CONFIG_XFRM=y
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_XMON is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_YAM is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_YENTA is not set
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+# CONFIG_YENTA_TI is not set
+# CONFIG_YENTA_TOSHIBA is not set
+# CONFIG_ZD1211RW_DEBUG is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_ZISOFS_FS is not set
+CONFIG_ZISOFS=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ZONE_DMA=y
diff --git a/target/linux/generic/config-2.6.31 b/target/linux/generic/config-2.6.31
new file mode 100644
index 0000000000..9c9eecf011
--- /dev/null
+++ b/target/linux/generic/config-2.6.31
@@ -0,0 +1,2706 @@
+# CONFIG_6PACK is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_9P_FS is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_ACENIC is not set
+# CONFIG_ACER_WMI is not set
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_ADFS_FS is not set
+# CONFIG_ADM6996_PHY is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_AGP is not set
+CONFIG_AIO=y
+# CONFIG_AIRO_CS is not set
+# CONFIG_AIRO is not set
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_ALTERA_PCIE_CHDMA is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ANDROID is not set
+CONFIG_ANON_INODES=y
+# CONFIG_APPLICOM is not set
+# CONFIG_AR8216_PHY is not set
+# CONFIG_AR9170_USB is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCNET is not set
+# CONFIG_ARM_UNWIND is not set
+CONFIG_ARPD=y
+# CONFIG_ARTHUR is not set
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_ASUS_OLED is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_AT24 is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_ATA_ACPI is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_ATA is not set
+# CONFIG_ATALK is not set
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_ATA_SFF=y
+# CONFIG_ATH5K is not set
+# CONFIG_ATH9K is not set
+# CONFIG_ATL1C is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL2 is not set
+# CONFIG_ATM_AMBASSADOR is not set
+CONFIG_ATM_BR2684_IPFILTER=y
+# CONFIG_ATM_BR2684 is not set
+# CONFIG_ATM_CLIP is not set
+CONFIG_ATM_CLIP_NO_ICMP=y
+# CONFIG_ATM_DRIVERS is not set
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATMEL is not set
+# CONFIG_ATM_ENI is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_FORE200E is not set
+# CONFIG_ATM_FORE200E_MAYBE is not set
+# CONFIG_ATM_HE is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_IA is not set
+# CONFIG_ATM_IDT77252 is not set
+# CONFIG_ATM is not set
+# CONFIG_ATM_LANAI is not set
+# CONFIG_ATM_LANE is not set
+# CONFIG_ATM_MPOA is not set
+# CONFIG_ATM_NICSTAR is not set
+# CONFIG_ATM_SOLOS is not set
+# CONFIG_ATM_TCP is not set
+# CONFIG_ATM_ZATM is not set
+# CONFIG_AUDIT is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_AX25_DAMA_SLAVE is not set
+# CONFIG_AX25 is not set
+# CONFIG_AX88796 is not set
+# CONFIG_B3DFG is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_B44 is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_BASE_FULL=y
+CONFIG_BASE_SMALL=0
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BATTERY_BQ27000_HDQ is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_BAYCOM_EPP is not set
+# CONFIG_BAYCOM_PAR is not set
+# CONFIG_BAYCOM_SER_FDX is not set
+# CONFIG_BAYCOM_SER_HDX is not set
+CONFIG_BCM43XX_DEBUG=y
+CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
+# CONFIG_BCM43XX_DMA_MODE is not set
+CONFIG_BCM43XX_DMA=y
+# CONFIG_BCM43XX is not set
+# CONFIG_BCM43XX_PIO_MODE is not set
+CONFIG_BCM43XX_PIO=y
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_BINARY_PRINTF is not set
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_BLINK is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_ATIIXP is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_CMD640 is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_CS5535 is not set
+# CONFIG_BLK_DEV_CS5536 is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_DELKIN is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_HD_IDE is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_BLK_DEV_HD_ONLY is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_IDEACPI is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_RZ1000 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SIS5513 is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_BLK_DEV=y
+CONFIG_BLOCK=y
+# CONFIG_BNX2 is not set
+# CONFIG_BONDING is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_BPQETHER is not set
+# CONFIG_BRIDGE_EBT_802_3 is not set
+# CONFIG_BRIDGE_EBT_AMONG is not set
+# CONFIG_BRIDGE_EBT_ARP is not set
+# CONFIG_BRIDGE_EBT_ARPREPLY is not set
+# CONFIG_BRIDGE_EBT_BROUTE is not set
+# CONFIG_BRIDGE_EBT_DNAT is not set
+# CONFIG_BRIDGE_EBT_IP6 is not set
+# CONFIG_BRIDGE_EBT_IP is not set
+# CONFIG_BRIDGE_EBT_LIMIT is not set
+# CONFIG_BRIDGE_EBT_LOG is not set
+# CONFIG_BRIDGE_EBT_MARK is not set
+# CONFIG_BRIDGE_EBT_MARK_T is not set
+# CONFIG_BRIDGE_EBT_NFLOG is not set
+# CONFIG_BRIDGE_EBT_PKTTYPE is not set
+# CONFIG_BRIDGE_EBT_REDIRECT is not set
+# CONFIG_BRIDGE_EBT_SNAT is not set
+# CONFIG_BRIDGE_EBT_STP is not set
+# CONFIG_BRIDGE_EBT_T_FILTER is not set
+# CONFIG_BRIDGE_EBT_T_NAT is not set
+# CONFIG_BRIDGE_EBT_ULOG is not set
+# CONFIG_BRIDGE_EBT_VLAN is not set
+# CONFIG_BRIDGE_NETFILTER is not set
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+CONFIG_BRIDGE=y
+# CONFIG_BROADCOM_PHY is not set
+CONFIG_BROKEN_ON_SMP=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BT_BNEP is not set
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+# CONFIG_BT_CMTP is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIDTL1 is not set
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIUSB is not set
+CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_HIDP is not set
+# CONFIG_BT is not set
+# CONFIG_BT_L2CAP is not set
+# CONFIG_BT_RFCOMM is not set
+CONFIG_BT_RFCOMM_TTY=y
+# CONFIG_BTRFS_FS is not set
+# CONFIG_BT_SCO is not set
+CONFIG_BUG=y
+# CONFIG_C2PORT is not set
+# CONFIG_CAN is not set
+# CONFIG_CAPI_AVM is not set
+# CONFIG_CAPI_EICON is not set
+# CONFIG_CAPI_TRACE is not set
+CONFIG_CARDBUS=y
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_CASSINI is not set
+# CONFIG_CB710_CORE is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_CFG80211 is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_CIFS is not set
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+CONFIG_CLASSIC_RCU=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_CLS_U32_PERF=y
+CONFIG_CMDLINE=""
+# CONFIG_CNIC is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_COMEDI is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_CONSTRUCTORS=y
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_COPS is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CROSSCOMPILE=y
+# CONFIG_CRYPTO_AEAD is not set
+# CONFIG_CRYPTO_AES_586 is not set
+# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_ALGAPI=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_BLKCIPHER is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRC32C_INTEL is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_HASH is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCBC is not set
+CONFIG_CRYPTO_PCOMP=y
+# CONFIG_CRYPTO_PRNG is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_RNG is not set
+# CONFIG_CRYPTO_SALSA20_586 is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_TWOFISH_586 is not set
+# CONFIG_CRYPTO_TWOFISH_COMMON is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+CONFIG_CRYPTO_UNLZMA=y
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ZLIB=y
+# CONFIG_CUSE is not set
+# CONFIG_DAB is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_DCB is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DECNET is not set
+CONFIG_DECOMPRESS_LZMA_NEEDED=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_BIC is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_CUBIC is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_HTCP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_DEFAULT_NOOP is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="westwood"
+# CONFIG_DEFAULT_VEGAS is not set
+CONFIG_DEFAULT_WESTWOOD=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+# CONFIG_DEVKMEM is not set
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_DGRS is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DL2K is not set
+# CONFIG_DLM is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_DMA_ENGINE is not set
+# CONFIG_DMASCC is not set
+# CONFIG_DMATEST is not set
+# CONFIG_DNET is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_DRM is not set
+# CONFIG_DS1682 is not set
+# CONFIG_DST is not set
+# CONFIG_DTLK is not set
+# CONFIG_DUMMY is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DVB is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000 is not set
+# CONFIG_E100 is not set
+# CONFIG_ECHO is not set
+# CONFIG_ECONET is not set
+# CONFIG_EDAC is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_ELF_CORE is not set
+CONFIG_EMBEDDED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_EPIC100 is not set
+CONFIG_EPOLL=y
+# CONFIG_EQUALIZER is not set
+# CONFIG_ET131X is not set
+# CONFIG_ETHOC is not set
+CONFIG_EVENTFD=y
+# CONFIG_EVENT_TRACER is not set
+CONFIG_EXPERIMENTAL=y
+# CONFIG_EXPORTFS is not set
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_EXTRA_FIRMWARE=""
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_EZX_PCAP is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_FAT_FS is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_ARC is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_EARLYSUSPEND is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_GEODE is not set
+# CONFIG_FB_GOLDFISH is not set
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_LE80578 is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_N411 is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_PS3 is not set
+# CONFIG_FB_PXA is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FCOE_FNIC is not set
+# CONFIG_FCOE is not set
+# CONFIG_FDDI is not set
+# CONFIG_FEALNX is not set
+CONFIG_FIB_RULES=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_FIREWIRE is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_FORCEDETH is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_FREEZER is not set
+# CONFIG_FSCACHE is not set
+CONFIG_FSNOTIFY=y
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FTL is not set
+# CONFIG_FTRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_FUSE_FS is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SAS is not set
+# CONFIG_FUSION_SPI is not set
+CONFIG_FUTEX=y
+CONFIG_FW_LOADER=y
+CONFIG_GACT_PROB=y
+# CONFIG_GAMEPORT is not set
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_TIME=y
+# CONFIG_GIGASET_DEBUG is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_DEVICE is not set
+# CONFIG_GPIOLIB is not set
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SYSFS is not set
+# CONFIG_GPIO_XILINX is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_HAMACHI is not set
+CONFIG_HAMRADIO=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_HAVE_MLOCK=y
+# CONFIG_HCALL_STATS is not set
+# CONFIG_HDLC_CISCO is not set
+# CONFIG_HDLC_FR is not set
+# CONFIG_HDLC is not set
+# CONFIG_HDLC_PPP is not set
+# CONFIG_HDLC_RAW_ETH is not set
+# CONFIG_HDLC_RAW is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_HECI is not set
+# CONFIG_HERMES is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_BRIGHT is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_COMPAT is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HID_DELL is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PID is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_HIGH_RES_TIMERS=y
+# CONFIG_HIPPI is not set
+# CONFIG_HOSTAP_CS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_HOSTAP_PCI is not set
+# CONFIG_HOSTAP_PLX is not set
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_HOTPLUG_PCI is not set
+CONFIG_HOTPLUG=y
+# CONFIG_HP100 is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_HVC_UDBG is not set
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+# CONFIG_HW_RANDOM_AMD is not set
+# CONFIG_HW_RANDOM_GEODE is not set
+# CONFIG_HW_RANDOM_INTEL is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_HW_RANDOM_VIA is not set
+# CONFIG_HYSDN is not set
+CONFIG_HZ=100
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_1024 is not set
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_48 is not set
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCA is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_CHARDEV is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_ELEKTOR is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_HELPER_AUTO is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_IBM_IIC is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2O is not set
+# CONFIG_I82092 is not set
+# CONFIG_I82365 is not set
+# CONFIG_IBM_ASM is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_IDE_GD is not set
+# CONFIG_IDE is not set
+CONFIG_IDE_MAX_HWIFS=4
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_IDE_PHISON is not set
+CONFIG_IDE_PROC_FS=y
+# CONFIG_IDE_TASK_IOCTL is not set
+# CONFIG_IEEE1394_DV1394 is not set
+# CONFIG_IEEE1394_ETH1394 is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_IEEE1394_OHCI1394 is not set
+# CONFIG_IEEE1394_PCILYNX is not set
+# CONFIG_IEEE1394_RAWIO is not set
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+# CONFIG_IEEE1394_VIDEO1394 is not set
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_IEEE80211_CRYPT_WEP is not set
+# CONFIG_IEEE80211_DEBUG is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_IEEE80211_SOFTMAC is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_IFB is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_IKCONFIG_PROC is not set
+# CONFIG_IMAGE_CMDLINE_HACK is not set
+# CONFIG_IMQ_BEHAVIOR_AA is not set
+# CONFIG_IMQ_BEHAVIOR_AB is not set
+# CONFIG_IMQ_BEHAVIOR_BA is not set
+# CONFIG_IMQ_BEHAVIOR_BB is not set
+# CONFIG_IMQ is not set
+CONFIG_IMQ_NUM_DEVS=2
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_TCP_DIAG is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET=y
+# CONFIG_INFINIBAND is not set
+# CONFIG_INFTL is not set
+CONFIG_INIT_ENV_ARG_LIMIT=32
+# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
+# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
+CONFIG_INITRAMFS_COMPRESSION_NONE=y
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_INPUT_APANEL is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATLAS_BTNS is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_MIMIO is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_PCSPKR is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_WISTRON_BTNS is not set
+# CONFIG_INSTRUMENTATION is not set
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IP1000 is not set
+# CONFIG_IP17XX_PHY is not set
+# CONFIG_IP6_NF_FILTER is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP6_NF_MANGLE is not set
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
+# CONFIG_IP6_NF_MATCH_LIMIT is not set
+# CONFIG_IP6_NF_MATCH_MH is not set
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_OWNER is not set
+# CONFIG_IP6_NF_MATCH_RT is not set
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_RAW is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+# CONFIG_IP6_NF_TARGET_IMQ is not set
+# CONFIG_IP6_NF_TARGET_LOG is not set
+# CONFIG_IP6_NF_TARGET_REJECT is not set
+# CONFIG_IP6_NF_TARGET_ROUTE is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IPC_NS is not set
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_MULTIPLE_TABLES=y
+# CONFIG_IP_NF_AMANDA is not set
+# CONFIG_IP_NF_ARPFILTER is not set
+# CONFIG_IP_NF_ARP_MANGLE is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK=y
+CONFIG_IP_NF_CT_ACCT=y
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+# CONFIG_IP_NF_FILTER is not set
+# CONFIG_IP_NF_FTP is not set
+# CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_IRC is not set
+# CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+# CONFIG_IP_NF_MATCH_IPP2P is not set
+# CONFIG_IP_NF_MATCH_OWNER is not set
+# CONFIG_IP_NF_MATCH_RECENT is not set
+# CONFIG_IP_NF_MATCH_SET is not set
+# CONFIG_IP_NF_MATCH_TIME is not set
+# CONFIG_IP_NF_MATCH_TOS is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+# CONFIG_IP_NF_NAT_AMANDA is not set
+# CONFIG_IP_NF_NAT_FTP is not set
+# CONFIG_IP_NF_NAT_H323 is not set
+# CONFIG_IP_NF_NAT_IRC is not set
+CONFIG_IP_NF_NAT_NEEDED=y
+# CONFIG_IP_NF_NAT_PPTP is not set
+# CONFIG_IP_NF_NAT_SIP is not set
+# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
+# CONFIG_IP_NF_NAT_TFTP is not set
+CONFIG_IP_NF_NAT=y
+# CONFIG_IP_NF_NETBIOS_NS is not set
+# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_SECURITY is not set
+CONFIG_IP_NF_SET_HASHSIZE=1024
+# CONFIG_IP_NF_SET_IPHASH is not set
+# CONFIG_IP_NF_SET_IPMAP is not set
+# CONFIG_IP_NF_SET_IPPORTHASH is not set
+# CONFIG_IP_NF_SET_IPTREE is not set
+# CONFIG_IP_NF_SET_IPTREEMAP is not set
+# CONFIG_IP_NF_SET is not set
+# CONFIG_IP_NF_SET_MACIPMAP is not set
+CONFIG_IP_NF_SET_MAX=256
+# CONFIG_IP_NF_SET_NETHASH is not set
+# CONFIG_IP_NF_SET_PORTMAP is not set
+# CONFIG_IP_NF_SIP is not set
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_IMQ is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_MASQUERADE is not set
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_IP_NF_TARGET_REJECT is not set
+# CONFIG_IP_NF_TARGET_ROUTE is not set
+# CONFIG_IP_NF_TARGET_SAME is not set
+# CONFIG_IP_NF_TARGET_SET is not set
+# CONFIG_IP_NF_TARGET_TOS is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+# CONFIG_IP_NF_TFTP is not set
+# CONFIG_IP_PIMSM_V1 is not set
+# CONFIG_IP_PIMSM_V2 is not set
+# CONFIG_IP_PNP is not set
+CONFIG_IP_ROUTE_FWMARK=y
+CONFIG_IP_ROUTE_MULTIPATH_CACHED=y
+# CONFIG_IP_ROUTE_MULTIPATH_DRR is not set
+# CONFIG_IP_ROUTE_MULTIPATH_RANDOM is not set
+# CONFIG_IP_ROUTE_MULTIPATH_RR is not set
+# CONFIG_IP_ROUTE_MULTIPATH_WRANDOM is not set
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_SCTP is not set
+CONFIG_IPSEC_NAT_TRAVERSAL=y
+# CONFIG_IPV6 is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTE_INFO is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IP_VS is not set
+# CONFIG_IPW2100_DEBUG is not set
+# CONFIG_IPW2100 is not set
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2200_DEBUG is not set
+# CONFIG_IPW2200 is not set
+CONFIG_IPW2200_MONITOR=y
+# CONFIG_IPW2200_PROMISCUOUS is not set
+# CONFIG_IPW2200_QOS is not set
+# CONFIG_IPW2200_RADIOTAP is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_IPX is not set
+# CONFIG_IRDA is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_ISCSI_TCP is not set
+CONFIG_ISDN=y
+# CONFIG_ISDN_AUDIO is not set
+# CONFIG_ISDN_CAPI_CAPIDRV is not set
+# CONFIG_ISDN_DIVERSION is not set
+# CONFIG_ISDN_DRV_ACT2000 is not set
+# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set
+# CONFIG_ISDN_DRV_EICON is not set
+# CONFIG_ISDN_DRV_HISAX is not set
+# CONFIG_ISDN_DRV_ICN is not set
+# CONFIG_ISDN_DRV_LOOP is not set
+# CONFIG_ISDN_DRV_PCBIT is not set
+# CONFIG_ISDN_DRV_SC is not set
+# CONFIG_ISDN_DRV_TPAM is not set
+# CONFIG_ISDN_WITH_ABC is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_ISO9660_FS is not set
+# CONFIG_IWL3945 is not set
+# CONFIG_IWLAGN is not set
+# CONFIG_IWLCORE is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_IXGB is not set
+# CONFIG_JBD2_DEBUG is not set
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_JBD is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_FS=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_STATISTICS is not set
+# CONFIG_JME is not set
+CONFIG_JOLIET=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_GZIP is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_LZO is not set
+# CONFIG_KEXEC is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYS is not set
+# CONFIG_KMEMTRACE is not set
+CONFIG_KMOD=y
+# CONFIG_KPROBES is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_LANMEDIA is not set
+# CONFIG_LAPB is not set
+# CONFIG_LASAT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_LBDAF=y
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_LEDS_ALIX is not set
+# CONFIG_LEDS_BD2802 is not set
+CONFIG_LEDS_CLASS=y
+# CONFIG_LEDS_DAC124S085 is not set
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+# CONFIG_LEDS_TRIGGER_MORSE is not set
+CONFIG_LEDS_TRIGGER_NETDEV=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_LIB80211_CRYPT_CCMP is not set
+# CONFIG_LIB80211_CRYPT_TKIP is not set
+# CONFIG_LIB80211_CRYPT_WEP is not set
+# CONFIG_LIB80211_DEBUG is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_LIBCRC32C is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_LIBERTAS_USB is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_LIBIPW_DEBUG is not set
+# CONFIG_LINE6_USB is not set
+# CONFIG_LLC2 is not set
+CONFIG_LLC=y
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_LOCKD is not set
+CONFIG_LOCKD_V4=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGO is not set
+# CONFIG_LSF is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_LTPC is not set
+# CONFIG_LXT_PHY is not set
+CONFIG_MAC80211_DEFAULT_PS_VALUE=1
+CONFIG_MAC80211_DEFAULT_PS=y
+# CONFIG_MAC80211 is not set
+# CONFIG_MAC_EMUMOUSEBTN is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MARKERS is not set
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_MD is not set
+# CONFIG_ME4000 is not set
+# CONFIG_MEDIA_ATTACH is not set
+# CONFIG_MEDIA_SUPPORT is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_MEILHAUS is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MIGRATION is not set
+CONFIG_MII=y
+CONFIG_MINI_FO=y
+# CONFIG_MINIX_FS is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_MIPS_FPU_EMU is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_MISDN_HFCPCI is not set
+# CONFIG_MISDN_HFCUSB is not set
+# CONFIG_MISDN is not set
+# CONFIG_MKISS is not set
+# CONFIG_MMC_ARMMMCI is not set
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_MMC_BLOCK is not set
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC is not set
+# CONFIG_MMC_S3C is not set
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SDRICOH_CS is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_TEST is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_VIA_SDMMC is not set
+CONFIG_MMU=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_MSDOS_FS is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_AR7_PARTS is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_BLKDEVS=y
+# CONFIG_MTD_BLOCK2MTD is not set
+CONFIG_MTD_BLOCK=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_JEDECPROBE is not set
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_MYLOADER_PARTS is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_OOPS is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_ROM is not set
+CONFIG_MTD_ROOTFS_ROOT_DEV=y
+CONFIG_MTD_ROOTFS_SPLIT=y
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_UBI is not set
+CONFIG_MTD=y
+# CONFIG_MVSWITCH_PHY is not set
+# CONFIG_MWAVE is not set
+# CONFIG_MWL8K is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_NET_9P is not set
+# CONFIG_NET_ACT_GACT is not set
+# CONFIG_NET_ACT_IPT is not set
+# CONFIG_NET_ACT_MIRRED is not set
+# CONFIG_NET_ACT_NAT is not set
+# CONFIG_NET_ACT_PEDIT is not set
+# CONFIG_NET_ACT_POLICE is not set
+# CONFIG_NET_ACT_SIMP is not set
+CONFIG_NET_ACT_SKBEDIT=y
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_CLS_BASIC=y
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_CLS_FW is not set
+CONFIG_NET_CLS_IND=y
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_U32 is not set
+CONFIG_NET_CLS=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETDEBUG is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEVICES_MULTIQUEUE=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_NET_EMATCH_CMP is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_EMATCH_META is not set
+# CONFIG_NET_EMATCH_NBYTE is not set
+CONFIG_NET_EMATCH_STACK=32
+# CONFIG_NET_EMATCH_TEXT is not set
+# CONFIG_NET_EMATCH_U32 is not set
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_ETHERNET=y
+# CONFIG_NET_FC is not set
+CONFIG_NETFILTER_ADVANCED=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_TPROXY is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG is not set
+# CONFIG_NETFILTER_XT_MATCH_LAYER7 is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATE is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
+# CONFIG_NETFILTER_XT_TARGET_IMQ is not set
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER=y
+CONFIG_NET_IPGRE_BROADCAST=y
+# CONFIG_NET_IPGRE is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_NET_KEY is not set
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_NET_PCI=y
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_NETPOLL is not set
+CONFIG_NET_RADIO=y
+# CONFIG_NETROM is not set
+# CONFIG_NET_SB1000 is not set
+# CONFIG_NET_SCH_ATM is not set
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_DRR is not set
+# CONFIG_NET_SCH_DSMARK is not set
+CONFIG_NET_SCHED=y
+# CONFIG_NET_SCH_ESFQ is not set
+CONFIG_NET_SCH_ESFQ_NFCT=y
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_INGRESS is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_RR is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_NET_WIRELESS_RTNETLINK=y
+CONFIG_NET_WIRELESS=y
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETXEN_NIC is not set
+CONFIG_NET=y
+# CONFIG_NEW_GPIO is not set
+CONFIG_NEW_LEDS=y
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_ENABLED=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_FTP is not set
+# CONFIG_NF_CONNTRACK_H323 is not set
+# CONFIG_NF_CONNTRACK_IPV4 is not set
+# CONFIG_NF_CONNTRACK_IPV6 is not set
+# CONFIG_NF_CONNTRACK_IRC is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_NF_CONNTRACK_RTSP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_NF_CONNTRACK_TFTP is not set
+# CONFIG_NF_CT_ACCT is not set
+# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_GRE is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_FTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_IRC is not set
+# CONFIG_NF_NAT is not set
+CONFIG_NF_NAT_NEEDED=y
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_PROTO_GRE is not set
+# CONFIG_NF_NAT_RTSP is not set
+# CONFIG_NF_NAT_SIP is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NFS_ACL_SUPPORT is not set
+CONFIG_NFS_COMMON=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V2_ACL is not set
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V4 is not set
+# CONFIG_NFS_FS is not set
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFTL is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NL80211=y
+CONFIG_NLATTR=y
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_NORTEL_HERMES is not set
+# CONFIG_NOZOMI is not set
+# CONFIG_NS83820 is not set
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_FS is not set
+# CONFIG_NTFS_RW is not set
+# CONFIG_NVRAM is not set
+# CONFIG_OCF_BENCH is not set
+# CONFIG_OCF_C7108 is not set
+# CONFIG_OCF_CRYPTOCTEON is not set
+# CONFIG_OCF_EP80579 is not set
+# CONFIG_OCF_HIFNHIPP is not set
+# CONFIG_OCF_HIFN is not set
+# CONFIG_OCF_IXP4XX is not set
+# CONFIG_OCF_KIRKWOOD is not set
+# CONFIG_OCF_OCF is not set
+# CONFIG_OCF_OCFNULL is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_OCF_SAFE is not set
+# CONFIG_OCF_TALITOS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_OPROFILE is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_P54_COMMON is not set
+CONFIG_PACKET_MMAP=y
+CONFIG_PACKET=y
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PANTHERLORD_FF is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PARPORT_PC is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CS5535 is not set
+# CONFIG_PATA_CS5536 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_ISAPNP is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_QDI is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_WINBOND_VLB is not set
+# CONFIG_PC300TOO is not set
+# CONFIG_PCCARD is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_PCI is not set
+# CONFIG_PCI200SYN is not set
+# CONFIG_PCI_ATMEL is not set
+# CONFIG_PCI_DISABLE_COMMON_QUIRKS is not set
+# CONFIG_PCIEASPM is not set
+# CONFIG_PCI_HERMES is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCIPCWATCHDOG is not set
+CONFIG_PCI_QUIRKS=y
+# CONFIG_PCI_STUB is not set
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_ATMEL is not set
+# CONFIG_PCMCIA_DEBUG is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_HERMES is not set
+# CONFIG_PCMCIA_IOCTL is not set
+# CONFIG_PCMCIA is not set
+# CONFIG_PCMCIA_LOAD_CIS is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_PCMCIA_SPECTRUM is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_XIRCOM is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PCNET32 is not set
+# CONFIG_PCSPKR_PLATFORM is not set
+# CONFIG_PD6729 is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_PHANTOM is not set
+# CONFIG_PHONE is not set
+# CONFIG_PHONET is not set
+# CONFIG_PHYLIB is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+# CONFIG_PID_NS is not set
+# CONFIG_PLAN9AUTH is not set
+CONFIG_PLIST=y
+# CONFIG_PLX_HERMES is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PM is not set
+# CONFIG_POHMELFS is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_PPC_4K_PAGES=y
+CONFIG_PPC4xx_GPIO=y
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_EMULATED_STATS is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_DEFLATE is not set
+CONFIG_PPP_FILTER=y
+# CONFIG_PPP is not set
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPPOATM is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_PRINTK=y
+# CONFIG_PRISM2_USB is not set
+# CONFIG_PRISM54 is not set
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROFILING is not set
+# CONFIG_QEMU is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_R3964 is not set
+# CONFIG_R6040 is not set
+# CONFIG_R8169 is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+# CONFIG_RAID_ATTRS is not set
+CONFIG_RAMFS=y
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RDC_17F3101X is not set
+# CONFIG_RD_GZIP is not set
+CONFIG_RD_LZMA=y
+# CONFIG_RD_LZO is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_RELAY is not set
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_RFKILL_INPUT is not set
+# CONFIG_RFKILL is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_ROSE is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_RT2860 is not set
+# CONFIG_RT2870 is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_RT3070 is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_RTC_DEBUG is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_PCF50606 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_RTC7301 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+CONFIG_RTC_HCTOSYS=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_RTL8187SE is not set
+# CONFIG_RTL8192SU is not set
+# CONFIG_RTL8306_PHY is not set
+# CONFIG_RTL8366_SMI is not set
+# CONFIG_RTL8366S_PHY_DEBUG_FS is not set
+# CONFIG_RTL8366S_PHY is not set
+# CONFIG_RTL8366RB_PHY is not set
+CONFIG_RT_MUTEXES=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_S2IO is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_SATA_PMP is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SC92031 is not set
+# CONFIG_SCC is not set
+# CONFIG_SCHED_BFS is not set
+CONFIG_SCHED_CFS=y
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_ESP_CORE is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_MPT2SAS is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_SCSI_PAS16 is not set
+CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+# CONFIG_SCSI_SEAGATE is not set
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_ULTRASTOR is not set
+CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SECCOMP is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_APPLESMC is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATK0110 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_CORETEMP is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCHMD is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_HDAPS is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_K8TEMP is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_UARTLITE is not set
+# CONFIG_SERIO is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_SHAPER is not set
+CONFIG_SHMEM=y
+CONFIG_SIGNALFD=y
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2_DEBUG is not set
+# CONFIG_SKY2 is not set
+CONFIG_SLABINFO=y
+CONFIG_SLAB=y
+# CONFIG_SLHC is not set
+# CONFIG_SLICOSS is not set
+# CONFIG_SLIP is not set
+# CONFIG_SLOB is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_SLUB is not set
+# CONFIG_SMARTJOYPLUS_FF is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMC91X is not set
+# CONFIG_SMP is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_SMSC9420 is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+# CONFIG_SND_AD1816A is not set
+# CONFIG_SND_AD1848 is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ADLIB is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ALS100 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT2320 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMI8330 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_CS4231 is not set
+# CONFIG_SND_CS4232 is not set
+# CONFIG_SND_CS4236 is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
+# CONFIG_SND_CTXFI is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DT019X is not set
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1688 is not set
+# CONFIG_SND_ES18XX is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_ES968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_GUSCLASSIC is not set
+# CONFIG_SND_GUSEXTREME is not set
+# CONFIG_SND_GUSMAX is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_HWDEP is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGODJX is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_INTERWAVE is not set
+# CONFIG_SND_INTERWAVE_STB is not set
+# CONFIG_SND_ISA is not set
+# CONFIG_SND is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_LX6464ES is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_MIPS is not set
+# CONFIG_SND_MIRO is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_OPL3SA2 is not set
+# CONFIG_SND_OPTI92X_AD1848 is not set
+# CONFIG_SND_OPTI92X_CS4231 is not set
+# CONFIG_SND_OPTI93X is not set
+CONFIG_SND_OSSEMUL=y
+# CONFIG_SND_OXYGEN is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_PCMCIA is not set
+# CONFIG_SND_PCM is not set
+# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_PDAUDIOCF is not set
+# CONFIG_SND_RAWMIDI is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RTCTIMER is not set
+# CONFIG_SND_SB16 is not set
+# CONFIG_SND_SB8 is not set
+# CONFIG_SND_SBAWE is not set
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_SIS7019 is not set
+# CONFIG_SND_SGALAXY is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_SSCAPE is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_TIMER is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_US122L is not set
+# CONFIG_SND_USB_USX2Y is not set
+CONFIG_SND_USB=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_WAVEFRONT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_SONY_LAPTOP is not set
+# CONFIG_SONYPI is not set
+# CONFIG_SOUND is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_DEBUG is not set
+# CONFIG_SPI_GPIO_OLD is not set
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_SPI_ORION is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_SQUASHFS_LZMA=y
+CONFIG_SQUASHFS_SUPPORT_ZLIB=y
+# CONFIG_SQUASHFS_VMALLOC is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SSB_DEBUG is not set
+# CONFIG_SSB is not set
+# CONFIG_SSB_PCMCIAHOST is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSFDC is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_STACKTRACE_SUPPORT=y
+# CONFIG_STAGING_EXCLUDE_BUILD is not set
+CONFIG_STAGING=y
+CONFIG_STANDALONE=y
+CONFIG_STDBINUTILS=y
+# CONFIG_STE10XP is not set
+CONFIG_STP=y
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_STRIP is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_GSS is not set
+# CONFIG_SUNRPC is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SWAP=y
+# CONFIG_SWCONFIG is not set
+# CONFIG_SYNCLINK_CS is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL=y
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_SYSFS=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_SYSV_FS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_SYSVIPC=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_TCIC is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_CUBIC is not set
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_VENO is not set
+CONFIG_TCP_CONG_WESTWOOD=y
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_TEXTSEARCH_BM is not set
+# CONFIG_TEXTSEARCH_FSM is not set
+# CONFIG_TEXTSEARCH_KMP is not set
+CONFIG_TEXTSEARCH=y
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_TIFM_CORE is not set
+# CONFIG_TIGON3 is not set
+CONFIG_TIMERFD=y
+# CONFIG_TINY_SHMEM is not set
+# CONFIG_TIPC is not set
+# CONFIG_TLAN is not set
+# CONFIG_TMD_HERMES is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_TMPFS=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_FILTER is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_S3C2410 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_TRANZPORT is not set
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_TR is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_TUNER_TEA5761 is not set
+# CONFIG_TUN is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_UDF_FS is not set
+CONFIG_UDF_NLS=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_UFS_FS is not set
+# CONFIG_UIO is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_UNEVICTABLE_LRU is not set
+# CONFIG_UNION_MOUNT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+CONFIG_UNIX=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AIPTEK is not set
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_APPLETOUCH is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATMEL is not set
+# CONFIG_USB_ATM is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_BELKIN=y
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_CPC is not set
+# CONFIG_USB_CXACRU is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_DABUSB is not set
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_ET61X251 is not set
+CONFIG_USB_EZUSB=y
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+CONFIG_USB_GSPCA_SN9C20X_EVDEV=y
+# CONFIG_USB_GSPCA_SN9C20X is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_USB_HIDDEV is not set
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HID is not set
+# CONFIG_USB_HSO is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_IP_COMMON is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_KC2190 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LIBUSUAL is not set
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_NET_AX8817X is not set
+# CONFIG_USB_NET_CDC_EEM is not set
+# CONFIG_USB_NET_CDCETHER is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_OHCI_HCD_PCI is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OHCI_HCD_PPC_SOC is not set
+# CONFIG_USB_OHCI_HCD_SSB is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_PWC_INPUT_EVDEV is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_QUATECH2 is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_SPEEDTOUCH is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_TMC is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_UEAGLEATM is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_VICAM is not set
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+# CONFIG_USB_VIDEO_CLASS is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_W9968CF is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_WUSB_CBAF is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_XHCI_HCD is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_XUSBATM is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_UWB is not set
+# CONFIG_VETH is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT848 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_CAFE_CCIC is not set
+# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_CX231XX is not set
+# CONFIG_VIDEO_CX2341X is not set
+# CONFIG_VIDEO_CX25840 is not set
+# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_DPC is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_GO7007 is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_IVTV is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_MEDIA is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_MXB is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_VIDEO_PMS is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_SAA6588 is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA7111 is not set
+# CONFIG_VIDEO_SAA7114 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7134 is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_USBVISION is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_VIDEO_V4L1 is not set
+# CONFIG_VIDEO_V4L2_COMMON is not set
+# CONFIG_VIDEO_V4L2 is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+# CONFIG_VIDEO_VPX3220 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_ZORAN is not set
+# CONFIG_VIRQ_DEBUG is not set
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_VIRTUALIZATION is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_VLAN_8021Q_GVRP is not set
+CONFIG_VLAN_8021Q=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_VMSPLIT_1G is not set
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_2G_OPT is not set
+# CONFIG_VMSPLIT_3G_OPT is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VT6655 is not set
+# CONFIG_VT is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_W1_CON is not set
+# CONFIG_W1 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS2490 is not set
+# CONFIG_W1_MASTER_GPIO is not set
+# CONFIG_W1_MASTER_MATROX is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W83627HF_WDT is not set
+# CONFIG_W83697HF_WDT is not set
+# CONFIG_W83877F_WDT is not set
+# CONFIG_W83977F_WDT is not set
+# CONFIG_WAN is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_WANXL is not set
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WDTPCI is not set
+# CONFIG_WIMAX is not set
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS=y
+CONFIG_WLAN_80211=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_X25 is not set
+# CONFIG_XFRM_IPCOMP is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_USER is not set
+CONFIG_XFRM=y
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_YAM is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_YENTA is not set
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+# CONFIG_YENTA_TI is not set
+# CONFIG_YENTA_TOSHIBA is not set
+# CONFIG_ZD1211RW_DEBUG is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_ZISOFS_FS is not set
+CONFIG_ZISOFS=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ZONE_DMA=y
diff --git a/target/linux/generic/config-2.6.32 b/target/linux/generic/config-2.6.32
new file mode 100644
index 0000000000..3cd83c2b1c
--- /dev/null
+++ b/target/linux/generic/config-2.6.32
@@ -0,0 +1,2835 @@
+# CONFIG_6PACK is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_9P_FS is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_ACENIC is not set
+# CONFIG_ACPI_POWER_METER is not set
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_ADFS_FS is not set
+# CONFIG_ADM6996_PHY is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_AGP is not set
+CONFIG_AIO=y
+# CONFIG_AIRO_CS is not set
+# CONFIG_AIRO is not set
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_ALTERA_PCIE_CHDMA is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ANDROID is not set
+CONFIG_ANON_INODES=y
+# CONFIG_APPLICOM is not set
+# CONFIG_AR8216_PHY is not set
+# CONFIG_AR9170_USB is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCNET is not set
+# CONFIG_ARM_UNWIND is not set
+CONFIG_ARPD=y
+# CONFIG_ARTHUR is not set
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_ASUS_OLED is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_AT24 is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_ATA_ACPI is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_ATA is not set
+# CONFIG_ATALK is not set
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_ATA_SFF=y
+# CONFIG_ATA_VERBOSE_ERROR is not set
+# CONFIG_ATH5K is not set
+# CONFIG_ATH9K is not set
+# CONFIG_ATL1C is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL2 is not set
+# CONFIG_ATM_AMBASSADOR is not set
+CONFIG_ATM_BR2684_IPFILTER=y
+# CONFIG_ATM_BR2684 is not set
+# CONFIG_ATM_CLIP is not set
+CONFIG_ATM_CLIP_NO_ICMP=y
+# CONFIG_ATM_DRIVERS is not set
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATMEL is not set
+# CONFIG_ATM_ENI is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_FORE200E is not set
+# CONFIG_ATM_FORE200E_MAYBE is not set
+# CONFIG_ATM_HE is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_IA is not set
+# CONFIG_ATM_IDT77252 is not set
+# CONFIG_ATM is not set
+# CONFIG_ATM_LANAI is not set
+# CONFIG_ATM_LANE is not set
+# CONFIG_ATM_MPOA is not set
+# CONFIG_ATM_NICSTAR is not set
+# CONFIG_ATM_SOLOS is not set
+# CONFIG_ATM_TCP is not set
+# CONFIG_ATM_ZATM is not set
+# CONFIG_AUDIT is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_AX25_DAMA_SLAVE is not set
+# CONFIG_AX25 is not set
+# CONFIG_AX88796 is not set
+# CONFIG_B3DFG is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_B44 is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+CONFIG_BASE_FULL=y
+CONFIG_BASE_SMALL=0
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BATTERY_BQ27000_HDQ is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_BAYCOM_EPP is not set
+# CONFIG_BAYCOM_PAR is not set
+# CONFIG_BAYCOM_SER_FDX is not set
+# CONFIG_BAYCOM_SER_HDX is not set
+CONFIG_BCM43XX_DEBUG=y
+CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
+# CONFIG_BCM43XX_DMA_MODE is not set
+CONFIG_BCM43XX_DMA=y
+# CONFIG_BCM43XX is not set
+# CONFIG_BCM43XX_PIO_MODE is not set
+CONFIG_BCM43XX_PIO=y
+# CONFIG_BE2ISCSI is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_BINARY_PRINTF is not set
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_BLINK is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_ATIIXP is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_CMD640 is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_CS5535 is not set
+# CONFIG_BLK_DEV_CS5536 is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_DELKIN is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_HD_IDE is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_BLK_DEV_HD_ONLY is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_IDEACPI is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_RZ1000 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SIS5513 is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_BLK_DEV=y
+CONFIG_BLOCK=y
+# CONFIG_BNX2 is not set
+# CONFIG_BONDING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_BPQETHER is not set
+# CONFIG_BRIDGE_EBT_802_3 is not set
+# CONFIG_BRIDGE_EBT_AMONG is not set
+# CONFIG_BRIDGE_EBT_ARP is not set
+# CONFIG_BRIDGE_EBT_ARPREPLY is not set
+# CONFIG_BRIDGE_EBT_BROUTE is not set
+# CONFIG_BRIDGE_EBT_DNAT is not set
+# CONFIG_BRIDGE_EBT_IP6 is not set
+# CONFIG_BRIDGE_EBT_IP is not set
+# CONFIG_BRIDGE_EBT_LIMIT is not set
+# CONFIG_BRIDGE_EBT_LOG is not set
+# CONFIG_BRIDGE_EBT_MARK is not set
+# CONFIG_BRIDGE_EBT_MARK_T is not set
+# CONFIG_BRIDGE_EBT_NFLOG is not set
+# CONFIG_BRIDGE_EBT_PKTTYPE is not set
+# CONFIG_BRIDGE_EBT_REDIRECT is not set
+# CONFIG_BRIDGE_EBT_SNAT is not set
+# CONFIG_BRIDGE_EBT_STP is not set
+# CONFIG_BRIDGE_EBT_T_FILTER is not set
+# CONFIG_BRIDGE_EBT_T_NAT is not set
+# CONFIG_BRIDGE_EBT_ULOG is not set
+# CONFIG_BRIDGE_EBT_VLAN is not set
+# CONFIG_BRIDGE_NETFILTER is not set
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+CONFIG_BRIDGE=y
+# CONFIG_BROADCOM_PHY is not set
+CONFIG_BROKEN_ON_SMP=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BT_BNEP is not set
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+# CONFIG_BT_CMTP is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIDTL1 is not set
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIUSB is not set
+CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_HIDP is not set
+# CONFIG_BT is not set
+# CONFIG_BT_L2CAP is not set
+# CONFIG_BT_MRVL is not set
+# CONFIG_BT_RFCOMM is not set
+CONFIG_BT_RFCOMM_TTY=y
+# CONFIG_BTRFS_FS is not set
+# CONFIG_BT_SCO is not set
+CONFIG_BUG=y
+# CONFIG_C2PORT is not set
+# CONFIG_CAN is not set
+# CONFIG_CAPI_AVM is not set
+# CONFIG_CAPI_EICON is not set
+# CONFIG_CAPI_TRACE is not set
+CONFIG_CARDBUS=y
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_CASSINI is not set
+# CONFIG_CB710_CORE is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_CFG80211 is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_CIFS is not set
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+CONFIG_CLASSIC_RCU=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_CLS_U32_PERF=y
+CONFIG_CMDLINE=""
+# CONFIG_CNIC is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_COMEDI is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_CONSTRUCTORS=y
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_COPS is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CROSSCOMPILE=y
+# CONFIG_CRYPTO_AEAD is not set
+# CONFIG_CRYPTO_AES_586 is not set
+# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_ALGAPI=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_BLKCIPHER is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRC32C_INTEL is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_MV_CESA is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_HASH is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_MANAGER is not set
+CONFIG_CRYPTO_MANAGER_NO_TESTS=y
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCBC is not set
+CONFIG_CRYPTO_PCOMP=y
+# CONFIG_CRYPTO_PRNG is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_RNG is not set
+# CONFIG_CRYPTO_SALSA20_586 is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_TWOFISH_586 is not set
+# CONFIG_CRYPTO_TWOFISH_COMMON is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+CONFIG_CRYPTO_UNLZMA=y
+# CONFIG_CRYPTO_VMAC is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ZLIB=y
+# CONFIG_CUSE is not set
+# CONFIG_DAB is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_DCB is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DECNET is not set
+CONFIG_DECOMPRESS_LZMA_NEEDED=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_BIC is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_CUBIC is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_HTCP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_DEFAULT_NOOP is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="westwood"
+# CONFIG_DEFAULT_VEGAS is not set
+CONFIG_DEFAULT_WESTWOOD=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_DEVTMPFS_MOUNT is not set
+# CONFIG_DEVTMPFS is not set
+# CONFIG_DGRS is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DL2K is not set
+# CONFIG_DLM is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_DMA_ENGINE is not set
+# CONFIG_DMASCC is not set
+# CONFIG_DMATEST is not set
+# CONFIG_DM_LOG_USERSPACE is not set
+# CONFIG_DNET is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_DRM is not set
+# CONFIG_DS1682 is not set
+# CONFIG_DST is not set
+# CONFIG_DTLK is not set
+# CONFIG_DUMMY is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DVB is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000 is not set
+# CONFIG_E100 is not set
+# CONFIG_ECHO is not set
+# CONFIG_ECONET is not set
+# CONFIG_EDAC is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_ELF_CORE is not set
+CONFIG_EMBEDDED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_EPIC100 is not set
+CONFIG_EPOLL=y
+# CONFIG_EQUALIZER is not set
+# CONFIG_ET131X is not set
+# CONFIG_ETHOC is not set
+CONFIG_EVENTFD=y
+# CONFIG_EVENT_TRACER is not set
+CONFIG_EXPERIMENTAL=y
+# CONFIG_EXPORTFS is not set
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_DEBUG is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_EXT4_FS_XATTR is not set
+CONFIG_EXTRA_FIRMWARE=""
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_EZX_PCAP is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_FAT_FS is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_ARC is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_EARLYSUSPEND is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_GEODE is not set
+# CONFIG_FB_GOLDFISH is not set
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_LE80578 is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_N411 is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_PS3 is not set
+# CONFIG_FB_PXA is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FCOE_FNIC is not set
+# CONFIG_FCOE is not set
+# CONFIG_FDDI is not set
+# CONFIG_FEALNX is not set
+CONFIG_FIB_RULES=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_FIREWIRE is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_FORCEDETH is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_FREEZER is not set
+# CONFIG_FSCACHE is not set
+CONFIG_FSNOTIFY=y
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FTL is not set
+# CONFIG_FTRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_FUSE_FS is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SAS is not set
+# CONFIG_FUSION_SPI is not set
+CONFIG_FUTEX=y
+CONFIG_FW_LOADER=y
+CONFIG_GACT_PROB=y
+# CONFIG_GAMEPORT is not set
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_TIME=y
+# CONFIG_GIGASET_CAPI is not set
+# CONFIG_GIGASET_DEBUG is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_DEVICE is not set
+# CONFIG_GPIO_LANGWELL is not set
+# CONFIG_GPIOLIB is not set
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SYSFS is not set
+# CONFIG_GPIO_XILINX is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_HAMACHI is not set
+CONFIG_HAMRADIO=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_HAVE_MLOCK=y
+# CONFIG_HCALL_STATS is not set
+# CONFIG_HDLC_CISCO is not set
+# CONFIG_HDLC_FR is not set
+# CONFIG_HDLC is not set
+# CONFIG_HDLC_PPP is not set
+# CONFIG_HDLC_RAW_ETH is not set
+# CONFIG_HDLC_RAW is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_HECI is not set
+# CONFIG_HERMES is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_BRIGHT is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_COMPAT is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HID_DELL is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PID is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_HIGH_RES_TIMERS=y
+# CONFIG_HIPPI is not set
+# CONFIG_HOSTAP_CS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_HOSTAP_PCI is not set
+# CONFIG_HOSTAP_PLX is not set
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_HOTPLUG_PCI is not set
+CONFIG_HOTPLUG=y
+# CONFIG_HP100 is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_HVC_UDBG is not set
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+# CONFIG_HW_RANDOM_AMD is not set
+# CONFIG_HW_RANDOM_GEODE is not set
+# CONFIG_HW_RANDOM_INTEL is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_HW_RANDOM_VIA is not set
+# CONFIG_HYPERV is not set
+# CONFIG_HYSDN is not set
+CONFIG_HZ=100
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_1024 is not set
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_48 is not set
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCA is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_CHARDEV is not set
+# CONFIG_I2C_COMPAT is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_ELEKTOR is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_HELPER_AUTO is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_IBM_IIC is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SCMI is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2O is not set
+# CONFIG_I82092 is not set
+# CONFIG_I82365 is not set
+# CONFIG_IBM_ASM is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_IDE_GD is not set
+# CONFIG_IDE is not set
+CONFIG_IDE_MAX_HWIFS=4
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_IDE_PHISON is not set
+CONFIG_IDE_PROC_FS=y
+# CONFIG_IDE_TASK_IOCTL is not set
+# CONFIG_IEEE1394_DV1394 is not set
+# CONFIG_IEEE1394_ETH1394 is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_IEEE1394_OHCI1394 is not set
+# CONFIG_IEEE1394_PCILYNX is not set
+# CONFIG_IEEE1394_RAWIO is not set
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+# CONFIG_IEEE1394_VIDEO1394 is not set
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_IEEE80211_CRYPT_WEP is not set
+# CONFIG_IEEE80211_DEBUG is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_IEEE80211_SOFTMAC is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_IFB is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_IIO is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_IKCONFIG_PROC is not set
+# CONFIG_IMAGE_CMDLINE_HACK is not set
+# CONFIG_IMQ_BEHAVIOR_AA is not set
+# CONFIG_IMQ_BEHAVIOR_AB is not set
+# CONFIG_IMQ_BEHAVIOR_BA is not set
+# CONFIG_IMQ_BEHAVIOR_BB is not set
+# CONFIG_IMQ is not set
+CONFIG_IMQ_NUM_DEVS=2
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_TCP_DIAG is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET=y
+# CONFIG_INFINIBAND is not set
+# CONFIG_INFTL is not set
+CONFIG_INIT_ENV_ARG_LIMIT=32
+# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
+# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
+CONFIG_INITRAMFS_COMPRESSION_NONE=y
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_INPUT_APANEL is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATLAS_BTNS is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_GPIO is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_MIMIO is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_PCSPKR is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_WINBOND_CIR is not set
+# CONFIG_INPUT_WISTRON_BTNS is not set
+# CONFIG_INSTRUMENTATION is not set
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IP1000 is not set
+# CONFIG_IP17XX_PHY is not set
+# CONFIG_IP6_NF_FILTER is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP6_NF_MANGLE is not set
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
+# CONFIG_IP6_NF_MATCH_LIMIT is not set
+# CONFIG_IP6_NF_MATCH_MH is not set
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_OWNER is not set
+# CONFIG_IP6_NF_MATCH_RT is not set
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_RAW is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+# CONFIG_IP6_NF_TARGET_IMQ is not set
+# CONFIG_IP6_NF_TARGET_LOG is not set
+# CONFIG_IP6_NF_TARGET_REJECT is not set
+# CONFIG_IP6_NF_TARGET_ROUTE is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IPC_NS is not set
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_MULTIPLE_TABLES=y
+# CONFIG_IP_NF_AMANDA is not set
+# CONFIG_IP_NF_ARPFILTER is not set
+# CONFIG_IP_NF_ARP_MANGLE is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK=y
+CONFIG_IP_NF_CT_ACCT=y
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+# CONFIG_IP_NF_FILTER is not set
+# CONFIG_IP_NF_FTP is not set
+# CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_IRC is not set
+# CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+# CONFIG_IP_NF_MATCH_IPP2P is not set
+# CONFIG_IP_NF_MATCH_OWNER is not set
+# CONFIG_IP_NF_MATCH_RECENT is not set
+# CONFIG_IP_NF_MATCH_SET is not set
+# CONFIG_IP_NF_MATCH_TIME is not set
+# CONFIG_IP_NF_MATCH_TOS is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+# CONFIG_IP_NF_NAT_AMANDA is not set
+# CONFIG_IP_NF_NAT_FTP is not set
+# CONFIG_IP_NF_NAT_H323 is not set
+# CONFIG_IP_NF_NAT_IRC is not set
+CONFIG_IP_NF_NAT_NEEDED=y
+# CONFIG_IP_NF_NAT_PPTP is not set
+# CONFIG_IP_NF_NAT_SIP is not set
+# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
+# CONFIG_IP_NF_NAT_TFTP is not set
+CONFIG_IP_NF_NAT=y
+# CONFIG_IP_NF_NETBIOS_NS is not set
+# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_SECURITY is not set
+CONFIG_IP_NF_SET_HASHSIZE=1024
+# CONFIG_IP_NF_SET_IPHASH is not set
+# CONFIG_IP_NF_SET_IPMAP is not set
+# CONFIG_IP_NF_SET_IPPORTHASH is not set
+# CONFIG_IP_NF_SET_IPTREE is not set
+# CONFIG_IP_NF_SET_IPTREEMAP is not set
+# CONFIG_IP_NF_SET is not set
+# CONFIG_IP_NF_SET_MACIPMAP is not set
+CONFIG_IP_NF_SET_MAX=256
+# CONFIG_IP_NF_SET_NETHASH is not set
+# CONFIG_IP_NF_SET_PORTMAP is not set
+# CONFIG_IP_NF_SIP is not set
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_IMQ is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_MASQUERADE is not set
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_IP_NF_TARGET_REJECT is not set
+# CONFIG_IP_NF_TARGET_ROUTE is not set
+# CONFIG_IP_NF_TARGET_SAME is not set
+# CONFIG_IP_NF_TARGET_SET is not set
+# CONFIG_IP_NF_TARGET_TOS is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+# CONFIG_IP_NF_TFTP is not set
+# CONFIG_IP_PIMSM_V1 is not set
+# CONFIG_IP_PIMSM_V2 is not set
+# CONFIG_IP_PNP is not set
+CONFIG_IP_ROUTE_FWMARK=y
+CONFIG_IP_ROUTE_MULTIPATH_CACHED=y
+# CONFIG_IP_ROUTE_MULTIPATH_DRR is not set
+# CONFIG_IP_ROUTE_MULTIPATH_RANDOM is not set
+# CONFIG_IP_ROUTE_MULTIPATH_RR is not set
+# CONFIG_IP_ROUTE_MULTIPATH_WRANDOM is not set
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_SCTP is not set
+CONFIG_IPSEC_NAT_TRAVERSAL=y
+# CONFIG_IPV6 is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTE_INFO is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IP_VS is not set
+# CONFIG_IPW2100_DEBUG is not set
+# CONFIG_IPW2100 is not set
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2200_DEBUG is not set
+# CONFIG_IPW2200 is not set
+CONFIG_IPW2200_MONITOR=y
+# CONFIG_IPW2200_PROMISCUOUS is not set
+# CONFIG_IPW2200_QOS is not set
+# CONFIG_IPW2200_RADIOTAP is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_IPX is not set
+# CONFIG_IRDA is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_ISCSI_TCP is not set
+CONFIG_ISDN=y
+# CONFIG_ISDN_I4L is not set
+# CONFIG_ISDN_AUDIO is not set
+# CONFIG_ISDN_CAPI is not set
+# CONFIG_ISDN_CAPI_CAPIDRV is not set
+# CONFIG_ISDN_DIVERSION is not set
+# CONFIG_ISDN_DRV_ACT2000 is not set
+# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set
+# CONFIG_ISDN_DRV_EICON is not set
+# CONFIG_ISDN_DRV_GIGASET is not set
+# CONFIG_ISDN_DRV_HISAX is not set
+# CONFIG_ISDN_DRV_ICN is not set
+# CONFIG_ISDN_DRV_LOOP is not set
+# CONFIG_ISDN_DRV_PCBIT is not set
+# CONFIG_ISDN_DRV_SC is not set
+# CONFIG_ISDN_DRV_TPAM is not set
+# CONFIG_ISDN_WITH_ABC is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_ISO9660_FS is not set
+# CONFIG_IWL3945 is not set
+# CONFIG_IWLAGN is not set
+# CONFIG_IWLCORE is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_IXGB is not set
+# CONFIG_JBD2_DEBUG is not set
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_JBD is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_FS=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_STATISTICS is not set
+# CONFIG_JME is not set
+CONFIG_JOLIET=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_GZIP is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_LZO is not set
+# CONFIG_KEXEC is not set
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYS is not set
+# CONFIG_KGDB is not set
+# CONFIG_KMEMTRACE is not set
+CONFIG_KMOD=y
+# CONFIG_KPROBES is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_KSM is not set
+# CONFIG_LANMEDIA is not set
+# CONFIG_LAPB is not set
+# CONFIG_LASAT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_LBDAF=y
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_LEDS_ALIX is not set
+# CONFIG_LEDS_BD2802 is not set
+CONFIG_LEDS_CLASS=y
+# CONFIG_LEDS_DAC124S085 is not set
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+# CONFIG_LEDS_TRIGGER_MORSE is not set
+CONFIG_LEDS_TRIGGER_NETDEV=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_LIB80211_CRYPT_CCMP is not set
+# CONFIG_LIB80211_CRYPT_TKIP is not set
+# CONFIG_LIB80211_CRYPT_WEP is not set
+# CONFIG_LIB80211_DEBUG is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_LIBCRC32C is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_LIBERTAS_USB is not set
+# CONFIG_LIBERTAS_SDIO is not set
+# CONFIG_LIBERTAS_SPI is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_LIBIPW_DEBUG is not set
+# CONFIG_LINE6_USB is not set
+# CONFIG_LLC2 is not set
+CONFIG_LLC=y
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_LOCKD is not set
+CONFIG_LOCKD_V4=y
+# CONFIG_LOCK_STAT is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGO is not set
+# CONFIG_LSF is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_LTPC is not set
+# CONFIG_LXT_PHY is not set
+CONFIG_MAC80211_DEFAULT_PS_VALUE=1
+CONFIG_MAC80211_DEFAULT_PS=y
+# CONFIG_MAC80211 is not set
+# CONFIG_MAC_EMUMOUSEBTN is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MARKERS is not set
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_MD is not set
+# CONFIG_ME4000 is not set
+# CONFIG_MEDIA_ATTACH is not set
+# CONFIG_MEDIA_SUPPORT is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_MEILHAUS is not set
+# CONFIG_MEMORY_FAILURE is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MIGRATION is not set
+CONFIG_MII=y
+CONFIG_MINI_FO=y
+# CONFIG_MINIX_FS is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_MIPS_FPU_EMU is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_MISDN_AVMFRITZ is not set
+# CONFIG_MISDN_HFCPCI is not set
+# CONFIG_MISDN_HFCUSB is not set
+# CONFIG_MISDN_INFINEON is not set
+# CONFIG_MISDN is not set
+# CONFIG_MISDN_NETJET is not set
+# CONFIG_MISDN_SPEEDFAX is not set
+# CONFIG_MISDN_W6692 is not set
+# CONFIG_MKISS is not set
+# CONFIG_MMC_ARMMMCI is not set
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_MMC_BLOCK is not set
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC is not set
+# CONFIG_MMC_MVSDIO is not set
+# CONFIG_MMC_S3C is not set
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SDRICOH_CS is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_TEST is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_VIA_SDMMC is not set
+CONFIG_MMU=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_MSDOS_FS is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_AR7_PARTS is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_BLKDEVS=y
+# CONFIG_MTD_BLOCK2MTD is not set
+CONFIG_MTD_BLOCK=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_GPIO_ADDR is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_JEDECPROBE is not set
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_MYLOADER_PARTS is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_OOPS is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_ROM is not set
+CONFIG_MTD_ROOTFS_ROOT_DEV=y
+CONFIG_MTD_ROOTFS_SPLIT=y
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_UBI is not set
+CONFIG_MTD=y
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_MVSWITCH_PHY is not set
+# CONFIG_MWAVE is not set
+# CONFIG_MWL8K is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_NET_9P is not set
+# CONFIG_NET_ACT_GACT is not set
+# CONFIG_NET_ACT_IPT is not set
+# CONFIG_NET_ACT_MIRRED is not set
+# CONFIG_NET_ACT_NAT is not set
+# CONFIG_NET_ACT_PEDIT is not set
+# CONFIG_NET_ACT_POLICE is not set
+# CONFIG_NET_ACT_SIMP is not set
+CONFIG_NET_ACT_SKBEDIT=y
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_CLS_BASIC=y
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_CLS_FW is not set
+CONFIG_NET_CLS_IND=y
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_U32 is not set
+CONFIG_NET_CLS=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETDEBUG is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEVICES_MULTIQUEUE=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_NET_EMATCH_CMP is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_EMATCH_META is not set
+# CONFIG_NET_EMATCH_NBYTE is not set
+CONFIG_NET_EMATCH_STACK=32
+# CONFIG_NET_EMATCH_TEXT is not set
+# CONFIG_NET_EMATCH_U32 is not set
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_ETHERNET=y
+# CONFIG_NET_FC is not set
+CONFIG_NETFILTER_ADVANCED=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_TPROXY is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG is not set
+# CONFIG_NETFILTER_XT_MATCH_LAYER7 is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATE is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
+# CONFIG_NETFILTER_XT_TARGET_IMQ is not set
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER=y
+CONFIG_NET_IPGRE_BROADCAST=y
+# CONFIG_NET_IPGRE is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_NET_KEY is not set
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_NET_PCI=y
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_NETPOLL is not set
+CONFIG_NET_RADIO=y
+# CONFIG_NETROM is not set
+# CONFIG_NET_SB1000 is not set
+# CONFIG_NET_SCH_ATM is not set
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_DRR is not set
+# CONFIG_NET_SCH_DSMARK is not set
+CONFIG_NET_SCHED=y
+# CONFIG_NET_SCH_ESFQ is not set
+CONFIG_NET_SCH_ESFQ_NFCT=y
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_INGRESS is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_RR is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_NET_WIRELESS_RTNETLINK=y
+CONFIG_NET_WIRELESS=y
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETXEN_NIC is not set
+CONFIG_NET=y
+# CONFIG_NEW_GPIO is not set
+CONFIG_NEW_LEDS=y
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_ENABLED=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_FTP is not set
+# CONFIG_NF_CONNTRACK_H323 is not set
+# CONFIG_NF_CONNTRACK_IPV4 is not set
+# CONFIG_NF_CONNTRACK_IPV6 is not set
+# CONFIG_NF_CONNTRACK_IRC is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_NF_CONNTRACK_RTSP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_NF_CONNTRACK_TFTP is not set
+# CONFIG_NF_CT_ACCT is not set
+# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_GRE is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_FTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_IRC is not set
+# CONFIG_NF_NAT is not set
+CONFIG_NF_NAT_NEEDED=y
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_PROTO_GRE is not set
+# CONFIG_NF_NAT_RTSP is not set
+# CONFIG_NF_NAT_SIP is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NFS_ACL_SUPPORT is not set
+CONFIG_NFS_COMMON=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V2_ACL is not set
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V4 is not set
+# CONFIG_NFS_FS is not set
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFTL is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NL80211=y
+CONFIG_NLATTR=y
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_NORTEL_HERMES is not set
+# CONFIG_NOZOMI is not set
+# CONFIG_NS83820 is not set
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_FS is not set
+# CONFIG_NTFS_RW is not set
+# CONFIG_NVRAM is not set
+# CONFIG_OCF_BENCH is not set
+# CONFIG_OCF_C7108 is not set
+# CONFIG_OCF_CRYPTOCTEON is not set
+# CONFIG_OCF_EP80579 is not set
+# CONFIG_OCF_HIFNHIPP is not set
+# CONFIG_OCF_HIFN is not set
+# CONFIG_OCF_IXP4XX is not set
+# CONFIG_OCF_KIRKWOOD is not set
+# CONFIG_OCF_OCF is not set
+# CONFIG_OCF_OCFNULL is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_OCF_SAFE is not set
+# CONFIG_OCF_TALITOS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_ORION_WATCHDOG is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_P54_COMMON is not set
+CONFIG_PACKET_MMAP=y
+CONFIG_PACKET=y
+# CONFIG_PAGE_POISONING is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PANTHERLORD_FF is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PARPORT_PC is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_ATP867X is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CS5535 is not set
+# CONFIG_PATA_CS5536 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_ISAPNP is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_QDI is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_WINBOND_VLB is not set
+# CONFIG_PC300TOO is not set
+# CONFIG_PCCARD is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_PCI is not set
+# CONFIG_PCI200SYN is not set
+# CONFIG_PCI_ATMEL is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_DISABLE_COMMON_QUIRKS is not set
+# CONFIG_PCIEAER_INJECT is not set
+# CONFIG_PCIEASPM is not set
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCI_HERMES is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCIPCWATCHDOG is not set
+CONFIG_PCI_QUIRKS=y
+# CONFIG_PCI_STUB is not set
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_ATMEL is not set
+# CONFIG_PCMCIA_DEBUG is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_HERMES is not set
+# CONFIG_PCMCIA_IOCTL is not set
+# CONFIG_PCMCIA is not set
+# CONFIG_PCMCIA_LOAD_CIS is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_PCMCIA_SPECTRUM is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PCMCIA_XIRCOM is not set
+# CONFIG_PCNET32 is not set
+# CONFIG_PCSPKR_PLATFORM is not set
+# CONFIG_PD6729 is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PHANTOM is not set
+# CONFIG_PHONE is not set
+# CONFIG_PHONET is not set
+# CONFIG_PHYLIB is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+# CONFIG_PID_NS is not set
+# CONFIG_PLAN9AUTH is not set
+CONFIG_PLIST=y
+# CONFIG_PLX_HERMES is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PM is not set
+# CONFIG_POHMELFS is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_PPC_4K_PAGES=y
+CONFIG_PPC4xx_GPIO=y
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+# CONFIG_PPC_EMULATED_STATS is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_DEFLATE is not set
+CONFIG_PPP_FILTER=y
+# CONFIG_PPP is not set
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPPOATM is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_PRINTK=y
+# CONFIG_PRISM2_USB is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_PROBE_INITRD_HEADER is not set
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROFILING is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_QEMU is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_QT2160 is not set
+# CONFIG_QUOTA is not set
+# CONFIG_R3964 is not set
+# CONFIG_R6040 is not set
+# CONFIG_R8169 is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+# CONFIG_RAID_ATTRS is not set
+CONFIG_RAMFS=y
+# CONFIG_RAR_REGISTER is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RDC_17F3101X is not set
+# CONFIG_RD_GZIP is not set
+CONFIG_RD_LZMA=y
+# CONFIG_RD_LZO is not set
+# CONFIG_RDS is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_RELAY is not set
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_RFKILL_INPUT is not set
+# CONFIG_RFKILL is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_ROSE is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_RT2860 is not set
+# CONFIG_RT2870 is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_RT3070 is not set
+# CONFIG_RT3090 is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_RTC_DEBUG is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+# CONFIG_RTC_DRV_PCF50606 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_RTC7301 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+CONFIG_RTC_HCTOSYS=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_RTL8187SE is not set
+# CONFIG_RTL8192E is not set
+# CONFIG_RTL8192SU is not set
+# CONFIG_RTL8306_PHY is not set
+# CONFIG_RTL8366_SMI is not set
+# CONFIG_RTL8366S_PHY_DEBUG_FS is not set
+# CONFIG_RTL8366S_PHY is not set
+# CONFIG_RTL8366RB_PHY is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_RUNTIME_DEBUG is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_S2IO is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_SATA_PMP is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SBC_FITPC2_WATCHDOG is not set
+# CONFIG_SC92031 is not set
+# CONFIG_SCC is not set
+# CONFIG_SCHED_BFS is not set
+CONFIG_SCHED_CFS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_SCSI_BFA_FC is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_ESP_CORE is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_MPT2SAS is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PMCRAID is not set
+CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+# CONFIG_SCSI_SEAGATE is not set
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_ULTRASTOR is not set
+CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SECCOMP is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_APPLESMC is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATK0110 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_CORETEMP is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCHMD is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_HDAPS is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_K8TEMP is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_UARTLITE is not set
+# CONFIG_SERIO is not set
+# CONFIG_SFI is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_SHAPER is not set
+CONFIG_SHMEM=y
+CONFIG_SIGNALFD=y
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2_DEBUG is not set
+# CONFIG_SKY2 is not set
+CONFIG_SLABINFO=y
+CONFIG_SLAB=y
+# CONFIG_SLHC is not set
+# CONFIG_SLICOSS is not set
+# CONFIG_SLIP is not set
+# CONFIG_SLOB is not set
+# CONFIG_SLOW_WORK_DEBUG is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_SLUB is not set
+# CONFIG_SMARTJOYPLUS_FF is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMC91X is not set
+# CONFIG_SMP is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_SMSC9420 is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+# CONFIG_SND_AD1816A is not set
+# CONFIG_SND_AD1848 is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ADLIB is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ALS100 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT2320 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMI8330 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_CS4231 is not set
+# CONFIG_SND_CS4232 is not set
+# CONFIG_SND_CS4236 is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
+# CONFIG_SND_CTXFI is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DT019X is not set
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1688 is not set
+# CONFIG_SND_ES18XX is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_ES968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_GUSCLASSIC is not set
+# CONFIG_SND_GUSEXTREME is not set
+# CONFIG_SND_GUSMAX is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_HWDEP is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGODJX is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_INTERWAVE is not set
+# CONFIG_SND_INTERWAVE_STB is not set
+# CONFIG_SND_ISA is not set
+# CONFIG_SND is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_LX6464ES is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_MIPS is not set
+# CONFIG_SND_MIRO is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_OPL3SA2 is not set
+# CONFIG_SND_OPTI92X_AD1848 is not set
+# CONFIG_SND_OPTI92X_CS4231 is not set
+# CONFIG_SND_OPTI93X is not set
+CONFIG_SND_OSSEMUL=y
+# CONFIG_SND_OXYGEN is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_PCMCIA is not set
+# CONFIG_SND_PCM is not set
+# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_PDAUDIOCF is not set
+# CONFIG_SND_PPC is not set
+# CONFIG_SND_RAWMIDI is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RTCTIMER is not set
+# CONFIG_SND_SB16 is not set
+# CONFIG_SND_SB8 is not set
+# CONFIG_SND_SBAWE is not set
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_SGALAXY is not set
+# CONFIG_SND_SIS7019 is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_SSCAPE is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_TIMER is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_US122L is not set
+# CONFIG_SND_USB_USX2Y is not set
+CONFIG_SND_USB=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_WAVEFRONT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_SONYPI is not set
+# CONFIG_SONY_LAPTOP is not set
+# CONFIG_SOUND is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_DEBUG is not set
+# CONFIG_SPI_GPIO_OLD is not set
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_SPI_ORION is not set
+# CONFIG_SPI_PPC4xx is not set
+# CONFIG_SPI_PL022 is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_SQUASHFS_LZMA=y
+CONFIG_SQUASHFS_SUPPORT_ZLIB=y
+# CONFIG_SQUASHFS_VMALLOC is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SSB_DEBUG is not set
+# CONFIG_SSB is not set
+# CONFIG_SSB_PCMCIAHOST is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB_SDIOHOST is not set
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSFDC is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_STACKTRACE_SUPPORT=y
+# CONFIG_STAGING_EXCLUDE_BUILD is not set
+CONFIG_STAGING=y
+CONFIG_STANDALONE=y
+CONFIG_STDBINUTILS=y
+# CONFIG_STE10XP is not set
+CONFIG_STP=y
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_STRIP is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_GSS is not set
+# CONFIG_SUNRPC is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SWAP=y
+# CONFIG_SWCONFIG is not set
+# CONFIG_SYNCLINK_CS is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL=y
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_SYSFS=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_SYSV_FS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_SYSVIPC=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_TCIC is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_CUBIC is not set
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_VENO is not set
+CONFIG_TCP_CONG_WESTWOOD=y
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_TEXTSEARCH_BM is not set
+# CONFIG_TEXTSEARCH_FSM is not set
+# CONFIG_TEXTSEARCH_KMP is not set
+CONFIG_TEXTSEARCH=y
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_TIFM_CORE is not set
+# CONFIG_TIGON3 is not set
+CONFIG_TIMERFD=y
+# CONFIG_TINY_SHMEM is not set
+# CONFIG_TIPC is not set
+# CONFIG_TLAN is not set
+# CONFIG_TMD_HERMES is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_TMPFS=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_FILTER is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_S3C2410 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_TRANZPORT is not set
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_TR is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_TUNER_TEA5761 is not set
+# CONFIG_TUN is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_UDF_FS is not set
+CONFIG_UDF_NLS=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_UFS_FS is not set
+# CONFIG_UIO is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_UNEVICTABLE_LRU is not set
+# CONFIG_UNION_MOUNT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+CONFIG_UNIX=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AIPTEK is not set
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_APPLETOUCH is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATMEL is not set
+# CONFIG_USB_ATM is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_BELKIN=y
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_CPC is not set
+# CONFIG_USB_CXACRU is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_DABUSB is not set
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_ET61X251 is not set
+CONFIG_USB_EZUSB=y
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GL860 is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA is not set
+# CONFIG_USB_GSPCA_JEILINJ is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+CONFIG_USB_GSPCA_SN9C20X_EVDEV=y
+# CONFIG_USB_GSPCA_SN9C20X is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_USB_HIDDEV is not set
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HID is not set
+# CONFIG_USB_HSO is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_IP_COMMON is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_KC2190 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LIBUSUAL is not set
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_NET_AX8817X is not set
+# CONFIG_USB_NET_CDC_EEM is not set
+# CONFIG_USB_NET_CDCETHER is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_OHCI_HCD_PCI is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OHCI_HCD_PPC_SOC is not set
+# CONFIG_USB_OHCI_HCD_SSB is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_PWC_INPUT_EVDEV is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_QUATECH2 is not set
+# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_SPEEDTOUCH is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_TMC is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_UEAGLEATM is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_VICAM is not set
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+# CONFIG_USB_VIDEO_CLASS is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_W9968CF is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_WUSB_CBAF is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_XHCI_HCD is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_XUSBATM is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_UWB is not set
+# CONFIG_VETH is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_VGA_ARB is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT848 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_CAFE_CCIC is not set
+# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_CX231XX is not set
+# CONFIG_VIDEO_CX2341X is not set
+# CONFIG_VIDEO_CX25840 is not set
+# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_DPC is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_GO7007 is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_IVTV is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_MEDIA is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_MXB is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_VIDEO_PMS is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_SAA6588 is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA7111 is not set
+# CONFIG_VIDEO_SAA7114 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7134 is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_USBVISION is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_VIDEO_V4L1 is not set
+# CONFIG_VIDEO_V4L2_COMMON is not set
+# CONFIG_VIDEO_V4L2 is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+# CONFIG_VIDEO_VPX3220 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_ZORAN is not set
+# CONFIG_VIRQ_DEBUG is not set
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_VIRTUALIZATION is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_VLAN_8021Q_GVRP is not set
+CONFIG_VLAN_8021Q=y
+# CONFIG_VME_BUS is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_VMSPLIT_1G is not set
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_2G_OPT is not set
+# CONFIG_VMSPLIT_3G_OPT is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMXNET3 is not set
+# CONFIG_VT6655 is not set
+# CONFIG_VT6656 is not set
+# CONFIG_VT is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_W1_CON is not set
+# CONFIG_W1 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS2490 is not set
+# CONFIG_W1_MASTER_GPIO is not set
+# CONFIG_W1_MASTER_MATROX is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W83627HF_WDT is not set
+# CONFIG_W83697HF_WDT is not set
+# CONFIG_W83877F_WDT is not set
+# CONFIG_W83977F_WDT is not set
+# CONFIG_WAN is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_WANXL is not set
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WDTPCI is not set
+# CONFIG_WIMAX is not set
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS=y
+CONFIG_WLAN_80211=y
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN=y
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_X25 is not set
+# CONFIG_XFRM_IPCOMP is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_USER is not set
+CONFIG_XFRM=y
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XILINX_EMACLITE is not set
+# CONFIG_XILINX_LL_TEMAC is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_YAM is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_YENTA is not set
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+# CONFIG_YENTA_TI is not set
+# CONFIG_YENTA_TOSHIBA is not set
+# CONFIG_ZD1211RW_DEBUG is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_ZISOFS_FS is not set
+CONFIG_ZISOFS=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ZONE_DMA=y
diff --git a/target/linux/generic/config-2.6.33 b/target/linux/generic/config-2.6.33
new file mode 100644
index 0000000000..fb8ac7a5a1
--- /dev/null
+++ b/target/linux/generic/config-2.6.33
@@ -0,0 +1,2906 @@
+# CONFIG_6PACK is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_9P_FS is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_AB4500_CORE is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_ACENIC is not set
+# CONFIG_ACPI_POWER_METER is not set
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_ADFS_FS is not set
+# CONFIG_ADM6996_PHY is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_AGP is not set
+CONFIG_AIO=y
+# CONFIG_AIRO_CS is not set
+# CONFIG_AIRO is not set
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_ALTERA_PCIE_CHDMA is not set
+# CONFIG_R8187SE is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ANDROID is not set
+CONFIG_ANON_INODES=y
+# CONFIG_APPLICOM is not set
+# CONFIG_AR8216_PHY is not set
+# CONFIG_AR9170_USB is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCNET is not set
+# CONFIG_ARM_UNWIND is not set
+CONFIG_ARPD=y
+# CONFIG_ARTHUR is not set
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_ASUS_OLED is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_AT24 is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_ATA_ACPI is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_ATA is not set
+# CONFIG_ATALK is not set
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_ATA_SFF=y
+# CONFIG_ATA_VERBOSE_ERROR is not set
+# CONFIG_ATH5K is not set
+# CONFIG_ATH9K is not set
+# CONFIG_ATL1C is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL2 is not set
+# CONFIG_ATM_AMBASSADOR is not set
+CONFIG_ATM_BR2684_IPFILTER=y
+# CONFIG_ATM_BR2684 is not set
+# CONFIG_ATM_CLIP is not set
+CONFIG_ATM_CLIP_NO_ICMP=y
+# CONFIG_ATM_DRIVERS is not set
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATMEL is not set
+# CONFIG_ATM_ENI is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_FORE200E is not set
+# CONFIG_ATM_FORE200E_MAYBE is not set
+# CONFIG_ATM_HE is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_IA is not set
+# CONFIG_ATM_IDT77252 is not set
+# CONFIG_ATM is not set
+# CONFIG_ATM_LANAI is not set
+# CONFIG_ATM_LANE is not set
+# CONFIG_ATM_MPOA is not set
+# CONFIG_ATM_NICSTAR is not set
+# CONFIG_ATM_SOLOS is not set
+# CONFIG_ATM_TCP is not set
+# CONFIG_ATM_ZATM is not set
+# CONFIG_AUDIT is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_AX25_DAMA_SLAVE is not set
+# CONFIG_AX25 is not set
+# CONFIG_AX88796 is not set
+# CONFIG_B3DFG is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_B44 is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+CONFIG_BASE_FULL=y
+CONFIG_BASE_SMALL=0
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BATTERY_BQ27000_HDQ is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_BAYCOM_EPP is not set
+# CONFIG_BAYCOM_PAR is not set
+# CONFIG_BAYCOM_SER_FDX is not set
+# CONFIG_BAYCOM_SER_HDX is not set
+CONFIG_BCM43XX_DEBUG=y
+CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
+# CONFIG_BCM43XX_DMA_MODE is not set
+CONFIG_BCM43XX_DMA=y
+# CONFIG_BCM43XX is not set
+# CONFIG_BCM43XX_PIO_MODE is not set
+CONFIG_BCM43XX_PIO=y
+# CONFIG_BE2ISCSI is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_BINARY_PRINTF is not set
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_BLINK is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_ATIIXP is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_CMD640 is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_CS5535 is not set
+# CONFIG_BLK_DEV_CS5536 is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_DELKIN is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_HD_IDE is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_BLK_DEV_HD_ONLY is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_IDEACPI is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_RZ1000 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SIS5513 is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_BLK_DEV=y
+CONFIG_BLOCK=y
+# CONFIG_BNX2 is not set
+# CONFIG_BONDING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_BPQETHER is not set
+# CONFIG_BRIDGE_EBT_802_3 is not set
+# CONFIG_BRIDGE_EBT_AMONG is not set
+# CONFIG_BRIDGE_EBT_ARP is not set
+# CONFIG_BRIDGE_EBT_ARPREPLY is not set
+# CONFIG_BRIDGE_EBT_BROUTE is not set
+# CONFIG_BRIDGE_EBT_DNAT is not set
+# CONFIG_BRIDGE_EBT_IP6 is not set
+# CONFIG_BRIDGE_EBT_IP is not set
+# CONFIG_BRIDGE_EBT_LIMIT is not set
+# CONFIG_BRIDGE_EBT_LOG is not set
+# CONFIG_BRIDGE_EBT_MARK is not set
+# CONFIG_BRIDGE_EBT_MARK_T is not set
+# CONFIG_BRIDGE_EBT_NFLOG is not set
+# CONFIG_BRIDGE_EBT_PKTTYPE is not set
+# CONFIG_BRIDGE_EBT_REDIRECT is not set
+# CONFIG_BRIDGE_EBT_SNAT is not set
+# CONFIG_BRIDGE_EBT_STP is not set
+# CONFIG_BRIDGE_EBT_T_FILTER is not set
+# CONFIG_BRIDGE_EBT_T_NAT is not set
+# CONFIG_BRIDGE_EBT_ULOG is not set
+# CONFIG_BRIDGE_EBT_VLAN is not set
+# CONFIG_BRIDGE_NETFILTER is not set
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+CONFIG_BRIDGE=y
+# CONFIG_BROADCOM_PHY is not set
+CONFIG_BROKEN_ON_SMP=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BT_ATH3K is not set
+# CONFIG_BT_BNEP is not set
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+# CONFIG_BT_CMTP is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIDTL1 is not set
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIUSB is not set
+CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_HIDP is not set
+# CONFIG_BT is not set
+# CONFIG_BT_L2CAP is not set
+# CONFIG_BT_MRVL is not set
+# CONFIG_BT_RFCOMM is not set
+CONFIG_BT_RFCOMM_TTY=y
+# CONFIG_BTRFS_FS is not set
+# CONFIG_BT_SCO is not set
+CONFIG_BUG=y
+# CONFIG_C2PORT is not set
+# CONFIG_CAN is not set
+# CONFIG_CAPI_AVM is not set
+# CONFIG_CAPI_EICON is not set
+# CONFIG_CAPI_TRACE is not set
+CONFIG_CARDBUS=y
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_CASSINI is not set
+# CONFIG_CB710_CORE is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_CFG80211 is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_CIFS is not set
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CLASSIC_RCU=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_CLS_U32_PERF=y
+CONFIG_CMDLINE=""
+# CONFIG_CNIC is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_COMEDI is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_CONSTRUCTORS=y
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CROSSCOMPILE=y
+# CONFIG_CRYPTO_AEAD is not set
+# CONFIG_CRYPTO_AES_586 is not set
+# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_ALGAPI=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_BLKCIPHER is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRC32C_INTEL is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_IFXMIPS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
+# CONFIG_CRYPTO_HASH is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_MANAGER is not set
+CONFIG_CRYPTO_MANAGER_NO_TESTS=y
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCBC is not set
+CONFIG_CRYPTO_PCOMP=y
+# CONFIG_CRYPTO_PRNG is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_RNG is not set
+# CONFIG_CRYPTO_SALSA20_586 is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_TWOFISH_586 is not set
+# CONFIG_CRYPTO_TWOFISH_COMMON is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+CONFIG_CRYPTO_UNLZMA=y
+# CONFIG_CRYPTO_VMAC is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ZLIB=y
+# CONFIG_CUSE is not set
+# CONFIG_DAB is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_DCB is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DECNET is not set
+CONFIG_DECOMPRESS_LZMA_NEEDED=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_BIC is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_CUBIC is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_HTCP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_DEFAULT_NOOP is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="westwood"
+# CONFIG_DEFAULT_VEGAS is not set
+CONFIG_DEFAULT_WESTWOOD=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_DEVTMPFS_MOUNT is not set
+# CONFIG_DEVTMPFS is not set
+# CONFIG_DGRS is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DL2K is not set
+# CONFIG_DLM is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_DMA_ENGINE is not set
+# CONFIG_DMASCC is not set
+# CONFIG_DMATEST is not set
+# CONFIG_DM_LOG_USERSPACE is not set
+# CONFIG_DNET is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_DRM is not set
+# CONFIG_DS1682 is not set
+# CONFIG_DST is not set
+# CONFIG_DTLK is not set
+# CONFIG_DUMMY is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DVB is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000 is not set
+# CONFIG_E100 is not set
+# CONFIG_ECHO is not set
+# CONFIG_ECONET is not set
+# CONFIG_EDAC is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_ELF_CORE is not set
+CONFIG_EMBEDDED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_EPIC100 is not set
+CONFIG_EPOLL=y
+# CONFIG_EQUALIZER is not set
+# CONFIG_ET131X is not set
+# CONFIG_ETHOC is not set
+CONFIG_EVENTFD=y
+# CONFIG_EVENT_TRACER is not set
+CONFIG_EXPERIMENTAL=y
+# CONFIG_EXPORTFS is not set
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_DEBUG is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_EXT4_USE_FOR_EXT23 is not set
+CONFIG_EXTRA_FIRMWARE=""
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_EZX_PCAP is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_FAT_FS is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_ARC is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_EARLYSUSPEND is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_GEODE is not set
+# CONFIG_FB_GOLDFISH is not set
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_LE80578 is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_N411 is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_PS3 is not set
+# CONFIG_FB_PXA is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FCOE_FNIC is not set
+# CONFIG_FCOE is not set
+# CONFIG_FDDI is not set
+# CONFIG_FEALNX is not set
+CONFIG_FIB_RULES=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_FIREWIRE is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_FORCEDETH is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_FREEZER is not set
+# CONFIG_FSCACHE is not set
+CONFIG_FSNOTIFY=y
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FTL is not set
+# CONFIG_FTRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_FUSE_FS is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SAS is not set
+# CONFIG_FUSION_SPI is not set
+CONFIG_FUTEX=y
+CONFIG_FW_LOADER=y
+CONFIG_GACT_PROB=y
+# CONFIG_GAMEPORT is not set
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_TIME=y
+# CONFIG_GIGASET_CAPI is not set
+# CONFIG_GIGASET_DEBUG is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_GPIO_ADP5588 is not set
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_CS5535 is not set
+# CONFIG_GPIO_DEVICE is not set
+# CONFIG_GPIO_LANGWELL is not set
+# CONFIG_GPIOLIB is not set
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SYSFS is not set
+# CONFIG_GPIO_XILINX is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_HAMACHI is not set
+CONFIG_HAMRADIO=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_HAVE_MLOCK=y
+# CONFIG_HCALL_STATS is not set
+# CONFIG_HDLC_CISCO is not set
+# CONFIG_HDLC_FR is not set
+# CONFIG_HDLC is not set
+# CONFIG_HDLC_PPP is not set
+# CONFIG_HDLC_RAW_ETH is not set
+# CONFIG_HDLC_RAW is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_HECI is not set
+# CONFIG_HERMES is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_BRIGHT is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_COMPAT is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HID_DELL is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PID is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_HIGH_RES_TIMERS=y
+# CONFIG_HIPPI is not set
+# CONFIG_HOSTAP_CS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_HOSTAP_PCI is not set
+# CONFIG_HOSTAP_PLX is not set
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_HOTPLUG_PCI is not set
+CONFIG_HOTPLUG=y
+# CONFIG_HP100 is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_HVC_UDBG is not set
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+# CONFIG_HW_RANDOM_AMD is not set
+# CONFIG_HW_RANDOM_GEODE is not set
+# CONFIG_HW_RANDOM_INTEL is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_HW_RANDOM_VIA is not set
+# CONFIG_HYPERV is not set
+# CONFIG_HYSDN is not set
+CONFIG_HZ=100
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_1024 is not set
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_48 is not set
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCA is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_CHARDEV is not set
+# CONFIG_I2C_COMPAT is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_ELEKTOR is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_HELPER_AUTO is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_IBM_IIC is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2O is not set
+# CONFIG_I82092 is not set
+# CONFIG_I82365 is not set
+# CONFIG_IBM_ASM is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_IDE_GD is not set
+# CONFIG_IDE is not set
+CONFIG_IDE_MAX_HWIFS=4
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_IDE_PHISON is not set
+CONFIG_IDE_PROC_FS=y
+# CONFIG_IDE_TASK_IOCTL is not set
+# CONFIG_IEEE1394_DV1394 is not set
+# CONFIG_IEEE1394_ETH1394 is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_IEEE1394_OHCI1394 is not set
+# CONFIG_IEEE1394_PCILYNX is not set
+# CONFIG_IEEE1394_RAWIO is not set
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+# CONFIG_IEEE1394_VIDEO1394 is not set
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_IEEE80211_CRYPT_WEP is not set
+# CONFIG_IEEE80211_DEBUG is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_IEEE80211_SOFTMAC is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_IFB is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_IIO is not set
+# CONFIG_RAMZSWAP is not set
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_IKCONFIG_PROC is not set
+# CONFIG_IMAGE_CMDLINE_HACK is not set
+# CONFIG_IMQ_BEHAVIOR_AA is not set
+# CONFIG_IMQ_BEHAVIOR_AB is not set
+# CONFIG_IMQ_BEHAVIOR_BA is not set
+# CONFIG_IMQ_BEHAVIOR_BB is not set
+# CONFIG_IMQ is not set
+CONFIG_IMQ_NUM_DEVS=2
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_TCP_DIAG is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET=y
+# CONFIG_INFINIBAND is not set
+# CONFIG_INFTL is not set
+CONFIG_INIT_ENV_ARG_LIMIT=32
+# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
+# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
+CONFIG_INITRAMFS_COMPRESSION_NONE=y
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_INPUT_APANEL is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATLAS_BTNS is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_GPIO is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_MIMIO is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_PCSPKR is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_WINBOND_CIR is not set
+# CONFIG_INPUT_WISTRON_BTNS is not set
+# CONFIG_INSTRUMENTATION is not set
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IP1000 is not set
+# CONFIG_IP17XX_PHY is not set
+# CONFIG_IP6_NF_FILTER is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP6_NF_MANGLE is not set
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
+# CONFIG_IP6_NF_MATCH_LIMIT is not set
+# CONFIG_IP6_NF_MATCH_MH is not set
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_OWNER is not set
+# CONFIG_IP6_NF_MATCH_RT is not set
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_RAW is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+# CONFIG_IP6_NF_TARGET_IMQ is not set
+# CONFIG_IP6_NF_TARGET_LOG is not set
+# CONFIG_IP6_NF_TARGET_REJECT is not set
+# CONFIG_IP6_NF_TARGET_ROUTE is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IPC_NS is not set
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_MULTIPLE_TABLES=y
+# CONFIG_IP_NF_AMANDA is not set
+# CONFIG_IP_NF_ARPFILTER is not set
+# CONFIG_IP_NF_ARP_MANGLE is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK=y
+CONFIG_IP_NF_CT_ACCT=y
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+# CONFIG_IP_NF_FILTER is not set
+# CONFIG_IP_NF_FTP is not set
+# CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_IRC is not set
+# CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+# CONFIG_IP_NF_MATCH_IPP2P is not set
+# CONFIG_IP_NF_MATCH_OWNER is not set
+# CONFIG_IP_NF_MATCH_RECENT is not set
+# CONFIG_IP_NF_MATCH_SET is not set
+# CONFIG_IP_NF_MATCH_TIME is not set
+# CONFIG_IP_NF_MATCH_TOS is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+# CONFIG_IP_NF_NAT_AMANDA is not set
+# CONFIG_IP_NF_NAT_FTP is not set
+# CONFIG_IP_NF_NAT_H323 is not set
+# CONFIG_IP_NF_NAT_IRC is not set
+CONFIG_IP_NF_NAT_NEEDED=y
+# CONFIG_IP_NF_NAT_PPTP is not set
+# CONFIG_IP_NF_NAT_SIP is not set
+# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
+# CONFIG_IP_NF_NAT_TFTP is not set
+CONFIG_IP_NF_NAT=y
+# CONFIG_IP_NF_NETBIOS_NS is not set
+# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_SECURITY is not set
+CONFIG_IP_NF_SET_HASHSIZE=1024
+# CONFIG_IP_NF_SET_IPHASH is not set
+# CONFIG_IP_NF_SET_IPMAP is not set
+# CONFIG_IP_NF_SET_IPPORTHASH is not set
+# CONFIG_IP_NF_SET_IPTREE is not set
+# CONFIG_IP_NF_SET_IPTREEMAP is not set
+# CONFIG_IP_NF_SET is not set
+# CONFIG_IP_NF_SET_MACIPMAP is not set
+CONFIG_IP_NF_SET_MAX=256
+# CONFIG_IP_NF_SET_NETHASH is not set
+# CONFIG_IP_NF_SET_PORTMAP is not set
+# CONFIG_IP_NF_SIP is not set
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_IMQ is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_MASQUERADE is not set
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_IP_NF_TARGET_REJECT is not set
+# CONFIG_IP_NF_TARGET_ROUTE is not set
+# CONFIG_IP_NF_TARGET_SAME is not set
+# CONFIG_IP_NF_TARGET_SET is not set
+# CONFIG_IP_NF_TARGET_TOS is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+# CONFIG_IP_NF_TFTP is not set
+# CONFIG_IP_PIMSM_V1 is not set
+# CONFIG_IP_PIMSM_V2 is not set
+# CONFIG_IP_PNP is not set
+CONFIG_IP_ROUTE_FWMARK=y
+CONFIG_IP_ROUTE_MULTIPATH_CACHED=y
+# CONFIG_IP_ROUTE_MULTIPATH_DRR is not set
+# CONFIG_IP_ROUTE_MULTIPATH_RANDOM is not set
+# CONFIG_IP_ROUTE_MULTIPATH_RR is not set
+# CONFIG_IP_ROUTE_MULTIPATH_WRANDOM is not set
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_SCTP is not set
+CONFIG_IPSEC_NAT_TRAVERSAL=y
+# CONFIG_IPV6 is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTE_INFO is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_SIT_6RD is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IP_VS is not set
+# CONFIG_IPW2100_DEBUG is not set
+# CONFIG_IPW2100 is not set
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2200_DEBUG is not set
+# CONFIG_IPW2200 is not set
+CONFIG_IPW2200_MONITOR=y
+# CONFIG_IPW2200_PROMISCUOUS is not set
+# CONFIG_IPW2200_QOS is not set
+# CONFIG_IPW2200_RADIOTAP is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_IPX is not set
+# CONFIG_IRDA is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_ISCSI_TCP is not set
+CONFIG_ISDN=y
+# CONFIG_ISDN_I4L is not set
+# CONFIG_ISDN_AUDIO is not set
+# CONFIG_ISDN_CAPI is not set
+# CONFIG_ISDN_CAPI_CAPIDRV is not set
+# CONFIG_ISDN_DIVERSION is not set
+# CONFIG_ISDN_DRV_ACT2000 is not set
+# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set
+# CONFIG_ISDN_DRV_EICON is not set
+# CONFIG_ISDN_DRV_GIGASET is not set
+# CONFIG_ISDN_DRV_HISAX is not set
+# CONFIG_ISDN_DRV_ICN is not set
+# CONFIG_ISDN_DRV_LOOP is not set
+# CONFIG_ISDN_DRV_PCBIT is not set
+# CONFIG_ISDN_DRV_SC is not set
+# CONFIG_ISDN_DRV_TPAM is not set
+# CONFIG_ISDN_WITH_ABC is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_ISO9660_FS is not set
+# CONFIG_IWL3945 is not set
+# CONFIG_IWLAGN is not set
+# CONFIG_IWLCORE is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_IWMC3200TOP is not set
+# CONFIG_IXGB is not set
+# CONFIG_JBD2_DEBUG is not set
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_JBD is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_FS=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_ZLIB is not set
+CONFIG_JFFS2_LZMA=y
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_STATISTICS is not set
+# CONFIG_JME is not set
+CONFIG_JOLIET=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_GZIP is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_LZO is not set
+# CONFIG_KEXEC is not set
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYS is not set
+# CONFIG_KGDB is not set
+# CONFIG_KMEMTRACE is not set
+CONFIG_KMOD=y
+# CONFIG_KPROBES is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_KSM is not set
+# CONFIG_LANMEDIA is not set
+# CONFIG_LAPB is not set
+# CONFIG_LASAT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_LBDAF=y
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_LEDS_ALIX is not set
+# CONFIG_LEDS_BD2802 is not set
+CONFIG_LEDS_CLASS=y
+# CONFIG_LEDS_DAC124S085 is not set
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LT3593 is not set
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+# CONFIG_LEDS_TRIGGER_MORSE is not set
+CONFIG_LEDS_TRIGGER_NETDEV=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_LIB80211_CRYPT_CCMP is not set
+# CONFIG_LIB80211_CRYPT_TKIP is not set
+# CONFIG_LIB80211_CRYPT_WEP is not set
+# CONFIG_LIB80211_DEBUG is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_LIBCRC32C is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_LIBERTAS_USB is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_LIBIPW_DEBUG is not set
+# CONFIG_LINE6_USB is not set
+# CONFIG_LLC2 is not set
+CONFIG_LLC=y
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_LOCKD is not set
+CONFIG_LOCKD_V4=y
+# CONFIG_LOCK_STAT is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGO is not set
+# CONFIG_LSF is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_LTPC is not set
+# CONFIG_LXT_PHY is not set
+CONFIG_LZMA_COMPRESS=y
+CONFIG_LZMA_DECOMPRESS=y
+CONFIG_MAC80211_DEFAULT_PS_VALUE=1
+CONFIG_MAC80211_DEFAULT_PS=y
+# CONFIG_MAC80211 is not set
+# CONFIG_MAC_EMUMOUSEBTN is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MARKERS is not set
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_MD is not set
+# CONFIG_ME4000 is not set
+# CONFIG_MEDIA_ATTACH is not set
+# CONFIG_MEDIA_SUPPORT is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_MEILHAUS is not set
+# CONFIG_MEMORY_FAILURE is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MIGRATION is not set
+CONFIG_MII=y
+CONFIG_MINI_FO=y
+# CONFIG_MINIX_FS is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_MIPS_FPU_EMU is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_MISDN_AVMFRITZ is not set
+# CONFIG_MISDN_HFCPCI is not set
+# CONFIG_MISDN_HFCUSB is not set
+# CONFIG_MISDN_INFINEON is not set
+# CONFIG_MISDN is not set
+# CONFIG_MISDN_NETJET is not set
+# CONFIG_MISDN_SPEEDFAX is not set
+# CONFIG_MISDN_W6692 is not set
+# CONFIG_MKISS is not set
+# CONFIG_MMC_ARMMMCI is not set
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_MMC_BLOCK is not set
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC is not set
+# CONFIG_MMC_MVSDIO is not set
+# CONFIG_MMC_S3C is not set
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SDRICOH_CS is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_TEST is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_VIA_SDMMC is not set
+CONFIG_MMU=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_MSDOS_FS is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_AR7_PARTS is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_BLKDEVS=y
+# CONFIG_MTD_BLOCK2MTD is not set
+CONFIG_MTD_BLOCK=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_GPIO_ADDR is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_JEDECPROBE is not set
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_MYLOADER_PARTS is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_OOPS is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_ROM is not set
+CONFIG_MTD_ROOTFS_ROOT_DEV=y
+CONFIG_MTD_ROOTFS_SPLIT=y
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_UBI is not set
+CONFIG_MTD=y
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_MVSWITCH_PHY is not set
+# CONFIG_MWAVE is not set
+# CONFIG_MWL8K is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_NET_9P is not set
+# CONFIG_NET_ACT_GACT is not set
+# CONFIG_NET_ACT_IPT is not set
+# CONFIG_NET_ACT_MIRRED is not set
+# CONFIG_NET_ACT_NAT is not set
+# CONFIG_NET_ACT_PEDIT is not set
+# CONFIG_NET_ACT_POLICE is not set
+# CONFIG_NET_ACT_SIMP is not set
+CONFIG_NET_ACT_SKBEDIT=y
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_CLS_BASIC=y
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_CLS_FW is not set
+CONFIG_NET_CLS_IND=y
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_U32 is not set
+CONFIG_NET_CLS=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETDEBUG is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEVICES_MULTIQUEUE=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_NET_EMATCH_CMP is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_EMATCH_META is not set
+# CONFIG_NET_EMATCH_NBYTE is not set
+CONFIG_NET_EMATCH_STACK=32
+# CONFIG_NET_EMATCH_TEXT is not set
+# CONFIG_NET_EMATCH_U32 is not set
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_ETHERNET=y
+# CONFIG_NET_FC is not set
+CONFIG_NETFILTER_ADVANCED=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_TPROXY is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG is not set
+# CONFIG_NETFILTER_XT_MATCH_LAYER7 is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATE is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
+# CONFIG_NETFILTER_XT_TARGET_IMQ is not set
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER=y
+CONFIG_NET_IPGRE_BROADCAST=y
+# CONFIG_NET_IPGRE is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_NET_KEY is not set
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_NET_PCI=y
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_NETPOLL is not set
+CONFIG_NET_RADIO=y
+# CONFIG_NETROM is not set
+# CONFIG_NET_SB1000 is not set
+# CONFIG_NET_SCH_ATM is not set
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_DRR is not set
+# CONFIG_NET_SCH_DSMARK is not set
+CONFIG_NET_SCHED=y
+# CONFIG_NET_SCH_ESFQ is not set
+CONFIG_NET_SCH_ESFQ_NFCT=y
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_INGRESS is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_RR is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_NET_WIRELESS_RTNETLINK=y
+CONFIG_NET_WIRELESS=y
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETXEN_NIC is not set
+CONFIG_NET=y
+# CONFIG_NEW_GPIO is not set
+CONFIG_NEW_LEDS=y
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_ENABLED=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_FTP is not set
+# CONFIG_NF_CONNTRACK_H323 is not set
+# CONFIG_NF_CONNTRACK_IPV4 is not set
+# CONFIG_NF_CONNTRACK_IPV6 is not set
+# CONFIG_NF_CONNTRACK_IRC is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_NF_CONNTRACK_RTSP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_NF_CONNTRACK_TFTP is not set
+# CONFIG_NF_CT_ACCT is not set
+# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_GRE is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_FTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_IRC is not set
+# CONFIG_NF_NAT is not set
+CONFIG_NF_NAT_NEEDED=y
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_PROTO_GRE is not set
+# CONFIG_NF_NAT_RTSP is not set
+# CONFIG_NF_NAT_SIP is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NFS_ACL_SUPPORT is not set
+CONFIG_NFS_COMMON=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V2_ACL is not set
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V4 is not set
+# CONFIG_NFS_FS is not set
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFTL is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NL80211=y
+CONFIG_NLATTR=y
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_NORTEL_HERMES is not set
+# CONFIG_NOZOMI is not set
+# CONFIG_NS83820 is not set
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_FS is not set
+# CONFIG_NTFS_RW is not set
+# CONFIG_NVRAM is not set
+# CONFIG_OC_ETM is not set
+# CONFIG_OCF_BENCH is not set
+# CONFIG_OCF_C7108 is not set
+# CONFIG_OCF_CRYPTOCTEON is not set
+# CONFIG_OCF_EP80579 is not set
+# CONFIG_OCF_HIFNHIPP is not set
+# CONFIG_OCF_HIFN is not set
+# CONFIG_OCF_IXP4XX is not set
+# CONFIG_OCF_KIRKWOOD is not set
+# CONFIG_OCF_OCF is not set
+# CONFIG_OCF_OCFNULL is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_OCF_SAFE is not set
+# CONFIG_OCF_TALITOS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_ORION_WATCHDOG is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_P54_COMMON is not set
+CONFIG_PACKET_MMAP=y
+CONFIG_PACKET=y
+# CONFIG_PAGE_POISONING is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PANTHERLORD_FF is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PARPORT_PC is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_ATP867X is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CS5535 is not set
+# CONFIG_PATA_CS5536 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_ISAPNP is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_QDI is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_WINBOND_VLB is not set
+# CONFIG_PC300TOO is not set
+# CONFIG_PCCARD is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_PCI is not set
+# CONFIG_PCI200SYN is not set
+# CONFIG_PCI_ATMEL is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_DISABLE_COMMON_QUIRKS is not set
+# CONFIG_PCIEAER_INJECT is not set
+# CONFIG_PCIEASPM is not set
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCI_HERMES is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCIPCWATCHDOG is not set
+CONFIG_PCI_QUIRKS=y
+# CONFIG_PCI_STUB is not set
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_ATMEL is not set
+# CONFIG_PCMCIA_DEBUG is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_HERMES is not set
+# CONFIG_PCMCIA_IOCTL is not set
+# CONFIG_PCMCIA is not set
+# CONFIG_PCMCIA_LOAD_CIS is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_PCMCIA_SPECTRUM is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PCMCIA_XIRCOM is not set
+# CONFIG_PCNET32 is not set
+# CONFIG_PCSPKR_PLATFORM is not set
+# CONFIG_PD6729 is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PHANTOM is not set
+# CONFIG_PHONE is not set
+# CONFIG_PHONET is not set
+# CONFIG_PHYLIB is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+# CONFIG_PID_NS is not set
+# CONFIG_PLAN9AUTH is not set
+CONFIG_PLIST=y
+# CONFIG_PLX_HERMES is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PM is not set
+# CONFIG_POHMELFS is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_PPC_4K_PAGES=y
+CONFIG_PPC4xx_GPIO=y
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+# CONFIG_PPC_EMULATED_STATS is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_DEFLATE is not set
+CONFIG_PPP_FILTER=y
+# CONFIG_PPP is not set
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPPOATM is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_TI_DAC7512 is not set
+CONFIG_TINY_RCU=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_PRINTK=y
+# CONFIG_PRISM2_USB is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_PROBE_INITRD_HEADER is not set
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROFILING is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_QEMU is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_QT2160 is not set
+# CONFIG_QUOTA is not set
+# CONFIG_R3964 is not set
+# CONFIG_R6040 is not set
+# CONFIG_R8169 is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+# CONFIG_RAID_ATTRS is not set
+CONFIG_RAMFS=y
+# CONFIG_RAR_REGISTER is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RDC_17F3101X is not set
+# CONFIG_RD_GZIP is not set
+CONFIG_RD_LZMA=y
+# CONFIG_RD_LZO is not set
+# CONFIG_RDS is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_RELAY is not set
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_RFKILL_INPUT is not set
+# CONFIG_RFKILL is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_ROSE is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_RT2860 is not set
+# CONFIG_RT2870 is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_RT3070 is not set
+# CONFIG_RT3090 is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_RTC_DEBUG is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+# CONFIG_RTC_DRV_PCF50606 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_RTC7301 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+CONFIG_RTC_HCTOSYS=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_RTL8187SE is not set
+# CONFIG_RTL8192E is not set
+# CONFIG_RTL8192U is not set
+# CONFIG_RTL8192SU is not set
+# CONFIG_RTL8306_PHY is not set
+# CONFIG_RTL8366_SMI is not set
+# CONFIG_RTL8366S_PHY_DEBUG_FS is not set
+# CONFIG_RTL8366S_PHY is not set
+# CONFIG_RTL8366RB_PHY is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_RUNTIME_DEBUG is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_S2IO is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_SATA_PMP is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SBC_FITPC2_WATCHDOG is not set
+# CONFIG_SC92031 is not set
+# CONFIG_SCC is not set
+# CONFIG_SCHED_BFS is not set
+CONFIG_SCHED_CFS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
+# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_SCSI_BFA_FC is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_ESP_CORE is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_HPSA is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_MPT2SAS is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PM8001 is not set
+# CONFIG_SCSI_PMCRAID is not set
+CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+# CONFIG_SCSI_SEAGATE is not set
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_ULTRASTOR is not set
+CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SECCOMP is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_AMC6821 is not set
+# CONFIG_SENSORS_APPLESMC is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATK0110 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_CORETEMP is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCHMD is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_HDAPS is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_K8TEMP is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_UARTLITE is not set
+# CONFIG_SERIO is not set
+# CONFIG_SFI is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_SHAPER is not set
+CONFIG_SHMEM=y
+CONFIG_SIGNALFD=y
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2_DEBUG is not set
+# CONFIG_SKY2 is not set
+CONFIG_SLABINFO=y
+CONFIG_SLAB=y
+# CONFIG_SLHC is not set
+# CONFIG_SLICOSS is not set
+# CONFIG_SLIP is not set
+# CONFIG_SLOB is not set
+# CONFIG_SLOW_WORK_DEBUG is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_SLUB is not set
+# CONFIG_SMARTJOYPLUS_FF is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMC91X is not set
+# CONFIG_SMP is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_SMSC9420 is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+# CONFIG_SND_AD1816A is not set
+# CONFIG_SND_AD1848 is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ADLIB is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ALS100 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT2320 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMI8330 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_CS4231 is not set
+# CONFIG_SND_CS4232 is not set
+# CONFIG_SND_CS4236 is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
+# CONFIG_SND_CTXFI is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DT019X is not set
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1688 is not set
+# CONFIG_SND_ES18XX is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_ES968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_GUSCLASSIC is not set
+# CONFIG_SND_GUSEXTREME is not set
+# CONFIG_SND_GUSMAX is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_HWDEP is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGODJX is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_INTERWAVE is not set
+# CONFIG_SND_INTERWAVE_STB is not set
+# CONFIG_SND_ISA is not set
+# CONFIG_SND is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_LX6464ES is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_MIPS is not set
+# CONFIG_SND_MIRO is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_OPL3SA2 is not set
+# CONFIG_SND_OPTI92X_AD1848 is not set
+# CONFIG_SND_OPTI92X_CS4231 is not set
+# CONFIG_SND_OPTI93X is not set
+CONFIG_SND_OSSEMUL=y
+# CONFIG_SND_OXYGEN is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_PCMCIA is not set
+# CONFIG_SND_PCM is not set
+# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_PDAUDIOCF is not set
+# CONFIG_SND_RAWMIDI is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RTCTIMER is not set
+# CONFIG_SND_SB16 is not set
+# CONFIG_SND_SB8 is not set
+# CONFIG_SND_SBAWE is not set
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_SIS7019 is not set
+# CONFIG_SND_SGALAXY is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_SSCAPE is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_TIMER is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_US122L is not set
+# CONFIG_SND_USB_USX2Y is not set
+CONFIG_SND_USB=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_WAVEFRONT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_SONYPI is not set
+# CONFIG_SONY_LAPTOP is not set
+# CONFIG_SOUND is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_DEBUG is not set
+# CONFIG_SPI_DESIGNWARE is not set
+# CONFIG_SPI_GPIO_OLD is not set
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_SPI_ORION is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_SPI_XILINX is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_SQUASHFS_LZMA=y
+CONFIG_SQUASHFS_SUPPORT_ZLIB=y
+# CONFIG_SQUASHFS_VMALLOC is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SSB_DEBUG is not set
+# CONFIG_SSB is not set
+# CONFIG_SSB_PCMCIAHOST is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB_SDIOHOST is not set
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSFDC is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_STACKTRACE_SUPPORT=y
+# CONFIG_STAGING_EXCLUDE_BUILD is not set
+CONFIG_STAGING=y
+CONFIG_STANDALONE=y
+CONFIG_STDBINUTILS=y
+# CONFIG_STE10XP is not set
+CONFIG_STP=y
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_STRIP is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_GSS is not set
+# CONFIG_SUNRPC is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SWAP=y
+# CONFIG_SWCONFIG is not set
+# CONFIG_SYNCLINK_CS is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL=y
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_SYSFS=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_SYSV_FS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_SYSVIPC=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_TCIC is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_CUBIC is not set
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_VENO is not set
+CONFIG_TCP_CONG_WESTWOOD=y
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_TEXTSEARCH_BM is not set
+# CONFIG_TEXTSEARCH_FSM is not set
+# CONFIG_TEXTSEARCH_KMP is not set
+CONFIG_TEXTSEARCH=y
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_TIFM_CORE is not set
+# CONFIG_TIGON3 is not set
+CONFIG_TIMERFD=y
+# CONFIG_TINY_SHMEM is not set
+# CONFIG_TIPC is not set
+# CONFIG_TLAN is not set
+# CONFIG_TMD_HERMES is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_TMPFS=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_FILTER is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_S3C2410 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_TRANZPORT is not set
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_TR is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_TUNER_TEA5761 is not set
+# CONFIG_TUN is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_UDF_FS is not set
+CONFIG_UDF_NLS=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_UFS_FS is not set
+# CONFIG_UIO is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_UNEVICTABLE_LRU is not set
+# CONFIG_UNION_MOUNT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+CONFIG_UNIX=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AIPTEK is not set
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_APPLETOUCH is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATMEL is not set
+# CONFIG_USB_ATM is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_BELKIN=y
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_CPC is not set
+# CONFIG_USB_CXACRU is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_DABUSB is not set
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_ET61X251 is not set
+CONFIG_USB_EZUSB=y
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GL860 is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA is not set
+# CONFIG_USB_GSPCA_JEILINJ is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7302 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+CONFIG_USB_GSPCA_SN9C20X_EVDEV=y
+# CONFIG_USB_GSPCA_SN9C20X is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_STV0680 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_USB_HIDDEV is not set
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HID is not set
+# CONFIG_USB_HSO is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_IP_COMMON is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_KC2190 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LIBUSUAL is not set
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_NET_AX8817X is not set
+# CONFIG_USB_NET_CDC_EEM is not set
+# CONFIG_USB_NET_CDCETHER is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_OHCI_HCD_PCI is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OHCI_HCD_PPC_SOC is not set
+# CONFIG_USB_OHCI_HCD_SSB is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_PWC_INPUT_EVDEV is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_QUATECH2 is not set
+# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_SPEEDTOUCH is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_TMC is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_UEAGLEATM is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_VICAM is not set
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+# CONFIG_USB_VIDEO_CLASS is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_W9968CF is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_WUSB_CBAF is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_XHCI_HCD is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_XUSBATM is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_UWB is not set
+# CONFIG_VETH is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_VGA_ARB is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT848 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_CAFE_CCIC is not set
+# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_CX231XX is not set
+# CONFIG_VIDEO_CX2341X is not set
+# CONFIG_VIDEO_CX25840 is not set
+# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_DPC is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_GO7007 is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_IR_I2C is not set
+# CONFIG_VIDEO_IVTV is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_MEDIA is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_MXB is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_VIDEO_PMS is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_SAA6588 is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA7111 is not set
+# CONFIG_VIDEO_SAA7114 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7134 is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_USBVISION is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_VIDEO_V4L1 is not set
+# CONFIG_VIDEO_V4L2_COMMON is not set
+# CONFIG_VIDEO_V4L2 is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+# CONFIG_VIDEO_VPX3220 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_ZORAN is not set
+# CONFIG_VIRQ_DEBUG is not set
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_VIRTUALIZATION is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_VLAN_8021Q_GVRP is not set
+CONFIG_VLAN_8021Q=y
+# CONFIG_VME_BUS is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_VMSPLIT_1G is not set
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_2G_OPT is not set
+# CONFIG_VMSPLIT_3G_OPT is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMXNET3 is not set
+# CONFIG_VT6655 is not set
+# CONFIG_VT6656 is not set
+# CONFIG_VT is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_W1_CON is not set
+# CONFIG_W1 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS2490 is not set
+# CONFIG_W1_MASTER_GPIO is not set
+# CONFIG_W1_MASTER_MATROX is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W83627HF_WDT is not set
+# CONFIG_W83697HF_WDT is not set
+# CONFIG_W83877F_WDT is not set
+# CONFIG_W83977F_WDT is not set
+# CONFIG_WAN is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_WANXL is not set
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WDTPCI is not set
+# CONFIG_WIMAX is not set
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS=y
+CONFIG_WLAN_80211=y
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN=y
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_WR_PPMC is not set
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_PRIV=y
+CONFIG_WEXT_SPY=y
+# CONFIG_X25 is not set
+# CONFIG_XFRM_IPCOMP is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_USER is not set
+CONFIG_XFRM=y
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XILINX_EMACLITE is not set
+# CONFIG_XILINX_LL_TEMAC is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_YAM is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_YENTA is not set
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+# CONFIG_YENTA_TI is not set
+# CONFIG_YENTA_TOSHIBA is not set
+# CONFIG_ZD1211RW_DEBUG is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_ZISOFS_FS is not set
+CONFIG_ZISOFS=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ZONE_DMA=y
+CONFIG_DEFAULT_SECURITY_DAC=y
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY=""
diff --git a/target/linux/generic/config-2.6.34 b/target/linux/generic/config-2.6.34
new file mode 100644
index 0000000000..53e28aea98
--- /dev/null
+++ b/target/linux/generic/config-2.6.34
@@ -0,0 +1,2958 @@
+# CONFIG_6PACK is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_9P_FS is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_AB4500_CORE is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_ACENIC is not set
+# CONFIG_ACPI_POWER_METER is not set
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_ADFS_FS is not set
+# CONFIG_ADM6996_PHY is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_AGP is not set
+CONFIG_AIO=y
+# CONFIG_AIRO_CS is not set
+# CONFIG_AIRO is not set
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_ALTERA_PCIE_CHDMA is not set
+# CONFIG_R8187SE is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ANDROID is not set
+CONFIG_ANON_INODES=y
+# CONFIG_APPLICOM is not set
+# CONFIG_AR8216_PHY is not set
+# CONFIG_AR9170_USB is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCNET is not set
+# CONFIG_ARM_UNWIND is not set
+CONFIG_ARPD=y
+# CONFIG_ARTHUR is not set
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_ASUS_OLED is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_AT24 is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_ATA_ACPI is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_ATA is not set
+# CONFIG_ATALK is not set
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_ATA_SFF=y
+# CONFIG_ATA_VERBOSE_ERROR is not set
+# CONFIG_ATH5K is not set
+# CONFIG_ATH9K is not set
+# CONFIG_ATL1C is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL2 is not set
+# CONFIG_ATM_AMBASSADOR is not set
+CONFIG_ATM_BR2684_IPFILTER=y
+# CONFIG_ATM_BR2684 is not set
+# CONFIG_ATM_CLIP is not set
+CONFIG_ATM_CLIP_NO_ICMP=y
+# CONFIG_ATM_DRIVERS is not set
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATMEL is not set
+# CONFIG_ATM_ENI is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_FORE200E is not set
+# CONFIG_ATM_FORE200E_MAYBE is not set
+# CONFIG_ATM_HE is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_IA is not set
+# CONFIG_ATM_IDT77252 is not set
+# CONFIG_ATM is not set
+# CONFIG_ATM_LANAI is not set
+# CONFIG_ATM_LANE is not set
+# CONFIG_ATM_MPOA is not set
+# CONFIG_ATM_NICSTAR is not set
+# CONFIG_ATM_SOLOS is not set
+# CONFIG_ATM_TCP is not set
+# CONFIG_ATM_ZATM is not set
+# CONFIG_AUDIT is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_AX25_DAMA_SLAVE is not set
+# CONFIG_AX25 is not set
+# CONFIG_AX88796 is not set
+# CONFIG_B3DFG is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_B44 is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+CONFIG_BASE_FULL=y
+CONFIG_BASE_SMALL=0
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BATTERY_BQ27000_HDQ is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_BAYCOM_EPP is not set
+# CONFIG_BAYCOM_PAR is not set
+# CONFIG_BAYCOM_SER_FDX is not set
+# CONFIG_BAYCOM_SER_HDX is not set
+CONFIG_BCM43XX_DEBUG=y
+CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
+# CONFIG_BCM43XX_DMA_MODE is not set
+CONFIG_BCM43XX_DMA=y
+# CONFIG_BCM43XX is not set
+# CONFIG_BCM43XX_PIO_MODE is not set
+CONFIG_BCM43XX_PIO=y
+# CONFIG_BE2ISCSI is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_BINARY_PRINTF is not set
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_BLINK is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_ATIIXP is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_CMD640 is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_CS5535 is not set
+# CONFIG_BLK_DEV_CS5536 is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_DELKIN is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_HD_IDE is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_BLK_DEV_HD_ONLY is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_IDEACPI is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_RZ1000 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SIS5513 is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_BLK_DEV=y
+CONFIG_BLOCK=y
+# CONFIG_BNX2 is not set
+# CONFIG_BONDING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_BPQETHER is not set
+CONFIG_BRIDGE=y
+# CONFIG_BRIDGE_EBT_802_3 is not set
+# CONFIG_BRIDGE_EBT_AMONG is not set
+# CONFIG_BRIDGE_EBT_ARP is not set
+# CONFIG_BRIDGE_EBT_ARPREPLY is not set
+# CONFIG_BRIDGE_EBT_BROUTE is not set
+# CONFIG_BRIDGE_EBT_DNAT is not set
+# CONFIG_BRIDGE_EBT_IP6 is not set
+# CONFIG_BRIDGE_EBT_IP is not set
+# CONFIG_BRIDGE_EBT_LIMIT is not set
+# CONFIG_BRIDGE_EBT_LOG is not set
+# CONFIG_BRIDGE_EBT_MARK is not set
+# CONFIG_BRIDGE_EBT_MARK_T is not set
+# CONFIG_BRIDGE_EBT_NFLOG is not set
+# CONFIG_BRIDGE_EBT_PKTTYPE is not set
+# CONFIG_BRIDGE_EBT_REDIRECT is not set
+# CONFIG_BRIDGE_EBT_SNAT is not set
+# CONFIG_BRIDGE_EBT_STP is not set
+# CONFIG_BRIDGE_EBT_T_FILTER is not set
+# CONFIG_BRIDGE_EBT_T_NAT is not set
+# CONFIG_BRIDGE_EBT_ULOG is not set
+# CONFIG_BRIDGE_EBT_VLAN is not set
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_BRIDGE_NETFILTER is not set
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_BROADCOM_PHY is not set
+CONFIG_BROKEN_ON_SMP=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BT_ATH3K is not set
+# CONFIG_BT_BNEP is not set
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+# CONFIG_BT_CMTP is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIDTL1 is not set
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIUSB is not set
+CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_HIDP is not set
+# CONFIG_BT is not set
+# CONFIG_BT_L2CAP is not set
+# CONFIG_BT_MRVL is not set
+# CONFIG_BT_RFCOMM is not set
+CONFIG_BT_RFCOMM_TTY=y
+# CONFIG_BTRFS_FS is not set
+# CONFIG_BT_SCO is not set
+CONFIG_BUG=y
+# CONFIG_C2PORT is not set
+# CONFIG_CAN is not set
+# CONFIG_CAPI_AVM is not set
+# CONFIG_CAPI_EICON is not set
+# CONFIG_CAPI_TRACE is not set
+CONFIG_CARDBUS=y
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_CASSINI is not set
+# CONFIG_CB710_CORE is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CFG80211 is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_CIFS is not set
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CLASSIC_RCU=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_CLS_U32_PERF=y
+CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CNIC is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_COMEDI is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_CONSTRUCTORS=y
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CROSSCOMPILE=y
+# CONFIG_CRYPTO_AEAD is not set
+# CONFIG_CRYPTO_AES_586 is not set
+# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_ALGAPI=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_BLKCIPHER is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRC32C_INTEL is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_IFXMIPS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
+# CONFIG_CRYPTO_HASH is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_MANAGER is not set
+CONFIG_CRYPTO_MANAGER_NO_TESTS=y
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCBC is not set
+CONFIG_CRYPTO_PCOMP=y
+# CONFIG_CRYPTO_PRNG is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_RNG is not set
+# CONFIG_CRYPTO_SALSA20_586 is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_TWOFISH_586 is not set
+# CONFIG_CRYPTO_TWOFISH_COMMON is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+CONFIG_CRYPTO_UNLZMA=y
+# CONFIG_CRYPTO_VMAC is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ZLIB=y
+# CONFIG_CRYSTALHD is not set
+# CONFIG_CUSE is not set
+# CONFIG_DAB is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_DCB is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DECNET is not set
+CONFIG_DECOMPRESS_LZMA_NEEDED=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_BIC is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_CUBIC is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_HTCP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_DEFAULT_NOOP is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="westwood"
+# CONFIG_DEFAULT_VEGAS is not set
+CONFIG_DEFAULT_WESTWOOD=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_DEVTMPFS_MOUNT is not set
+# CONFIG_DEVTMPFS is not set
+# CONFIG_DGRS is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DL2K is not set
+# CONFIG_DLM is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_DMA_ENGINE is not set
+# CONFIG_DMASCC is not set
+# CONFIG_DMATEST is not set
+# CONFIG_DM_LOG_USERSPACE is not set
+# CONFIG_DNET is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_DRM is not set
+# CONFIG_DS1682 is not set
+# CONFIG_DST is not set
+# CONFIG_DT3155 is not set
+# CONFIG_DTLK is not set
+# CONFIG_DUMMY is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DVB is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000 is not set
+# CONFIG_E100 is not set
+# CONFIG_ECHO is not set
+# CONFIG_ECONET is not set
+# CONFIG_EDAC is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_ELF_CORE is not set
+CONFIG_EMBEDDED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_EPIC100 is not set
+CONFIG_EPOLL=y
+# CONFIG_EQUALIZER is not set
+# CONFIG_ET131X is not set
+# CONFIG_ETHOC is not set
+CONFIG_EVENTFD=y
+# CONFIG_EVENT_TRACER is not set
+CONFIG_EXPERIMENTAL=y
+# CONFIG_EXPORTFS is not set
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_DEBUG is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_EXT4_USE_FOR_EXT23 is not set
+CONFIG_EXTRA_FIRMWARE=""
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_EZX_PCAP is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_FAT_FS is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_ARC is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_EARLYSUSPEND is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_GEODE is not set
+# CONFIG_FB_GOLDFISH is not set
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_LE80578 is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_N411 is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_PS3 is not set
+# CONFIG_FB_PXA is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FCOE_FNIC is not set
+# CONFIG_FCOE is not set
+# CONFIG_FDDI is not set
+# CONFIG_FEALNX is not set
+CONFIG_FIB_RULES=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_FIREWIRE is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_FORCEDETH is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_FREEZER is not set
+# CONFIG_FSCACHE is not set
+CONFIG_FSNOTIFY=y
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FTL is not set
+# CONFIG_FTRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_FUSE_FS is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SAS is not set
+# CONFIG_FUSION_SPI is not set
+CONFIG_FUTEX=y
+CONFIG_FW_LOADER=y
+CONFIG_GACT_PROB=y
+# CONFIG_GAMEPORT is not set
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_TIME=y
+# CONFIG_GENERIC_PWM is not set
+# CONFIG_GIGASET_CAPI is not set
+# CONFIG_GIGASET_DEBUG is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_GPIO_ADP5588 is not set
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_CS5535 is not set
+# CONFIG_GPIO_DEVICE is not set
+# CONFIG_GPIO_IT8761E is not set
+# CONFIG_GPIO_LANGWELL is not set
+# CONFIG_GPIOLIB is not set
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SCH is not set
+# CONFIG_GPIO_SYSFS is not set
+# CONFIG_GPIO_XILINX is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_HAMACHI is not set
+CONFIG_HAMRADIO=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_HAVE_MLOCK=y
+# CONFIG_HCALL_STATS is not set
+# CONFIG_HDLC_CISCO is not set
+# CONFIG_HDLC_FR is not set
+# CONFIG_HDLC is not set
+# CONFIG_HDLC_PPP is not set
+# CONFIG_HDLC_RAW_ETH is not set
+# CONFIG_HDLC_RAW is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_HECI is not set
+# CONFIG_HERMES is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_HID_3M_PCT is not set
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_BRIGHT is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_COMPAT is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HID_DELL is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MAGICMOUSE is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_MOSART is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PID is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_HIGH_RES_TIMERS=y
+# CONFIG_HIPPI is not set
+# CONFIG_HOSTAP_CS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_HOSTAP_PCI is not set
+# CONFIG_HOSTAP_PLX is not set
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_HOTPLUG_PCI is not set
+CONFIG_HOTPLUG=y
+# CONFIG_HP100 is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_HVC_UDBG is not set
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+# CONFIG_HW_RANDOM_AMD is not set
+# CONFIG_HW_RANDOM_GEODE is not set
+# CONFIG_HW_RANDOM_INTEL is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_HW_RANDOM_VIA is not set
+# CONFIG_HYPERV is not set
+# CONFIG_HYSDN is not set
+CONFIG_HZ=100
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_1024 is not set
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_48 is not set
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCA is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_CHARDEV is not set
+# CONFIG_I2C_COMPAT is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_ELEKTOR is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_HELPER_AUTO is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_IBM_IIC is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_SMBUS is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_XILINX is not set
+# CONFIG_I2O is not set
+# CONFIG_I82092 is not set
+# CONFIG_I82365 is not set
+# CONFIG_IBM_ASM is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_IDE_GD is not set
+# CONFIG_IDE is not set
+CONFIG_IDE_MAX_HWIFS=4
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_IDE_PHISON is not set
+CONFIG_IDE_PROC_FS=y
+# CONFIG_IDE_TASK_IOCTL is not set
+# CONFIG_IEEE1394_DV1394 is not set
+# CONFIG_IEEE1394_ETH1394 is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_IEEE1394_OHCI1394 is not set
+# CONFIG_IEEE1394_PCILYNX is not set
+# CONFIG_IEEE1394_RAWIO is not set
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+# CONFIG_IEEE1394_VIDEO1394 is not set
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_IEEE80211_CRYPT_WEP is not set
+# CONFIG_IEEE80211_DEBUG is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_IEEE80211_SOFTMAC is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_IFB is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_IIO is not set
+# CONFIG_RAMZSWAP is not set
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_IKCONFIG_PROC is not set
+# CONFIG_IMAGE_CMDLINE_HACK is not set
+# CONFIG_IMQ_BEHAVIOR_AA is not set
+# CONFIG_IMQ_BEHAVIOR_AB is not set
+# CONFIG_IMQ_BEHAVIOR_BA is not set
+# CONFIG_IMQ_BEHAVIOR_BB is not set
+# CONFIG_IMQ is not set
+CONFIG_IMQ_NUM_DEVS=2
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_TCP_DIAG is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET=y
+# CONFIG_INFINIBAND is not set
+# CONFIG_INFTL is not set
+CONFIG_INIT_ENV_ARG_LIMIT=32
+# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
+# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
+CONFIG_INITRAMFS_COMPRESSION_NONE=y
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_INPUT_APANEL is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATLAS_BTNS is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_GPIO is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_MIMIO is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_PCSPKR is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_WINBOND_CIR is not set
+# CONFIG_INPUT_WISTRON_BTNS is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INSTRUMENTATION is not set
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IP1000 is not set
+# CONFIG_IP17XX_PHY is not set
+# CONFIG_IP6_NF_FILTER is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP6_NF_MANGLE is not set
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
+# CONFIG_IP6_NF_MATCH_LIMIT is not set
+# CONFIG_IP6_NF_MATCH_MH is not set
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_OWNER is not set
+# CONFIG_IP6_NF_MATCH_RT is not set
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_RAW is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+# CONFIG_IP6_NF_TARGET_IMQ is not set
+# CONFIG_IP6_NF_TARGET_LOG is not set
+# CONFIG_IP6_NF_TARGET_REJECT is not set
+# CONFIG_IP6_NF_TARGET_ROUTE is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IPC_NS is not set
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_MULTIPLE_TABLES=y
+# CONFIG_IP_NF_AMANDA is not set
+# CONFIG_IP_NF_ARPFILTER is not set
+# CONFIG_IP_NF_ARP_MANGLE is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK=y
+CONFIG_IP_NF_CT_ACCT=y
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+# CONFIG_IP_NF_FILTER is not set
+# CONFIG_IP_NF_FTP is not set
+# CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_IRC is not set
+# CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+# CONFIG_IP_NF_MATCH_IPP2P is not set
+# CONFIG_IP_NF_MATCH_OWNER is not set
+# CONFIG_IP_NF_MATCH_RECENT is not set
+# CONFIG_IP_NF_MATCH_SET is not set
+# CONFIG_IP_NF_MATCH_TIME is not set
+# CONFIG_IP_NF_MATCH_TOS is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+# CONFIG_IP_NF_NAT_AMANDA is not set
+# CONFIG_IP_NF_NAT_FTP is not set
+# CONFIG_IP_NF_NAT_H323 is not set
+# CONFIG_IP_NF_NAT_IRC is not set
+CONFIG_IP_NF_NAT_NEEDED=y
+# CONFIG_IP_NF_NAT_PPTP is not set
+# CONFIG_IP_NF_NAT_SIP is not set
+# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
+# CONFIG_IP_NF_NAT_TFTP is not set
+CONFIG_IP_NF_NAT=y
+# CONFIG_IP_NF_NETBIOS_NS is not set
+# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_SECURITY is not set
+CONFIG_IP_NF_SET_HASHSIZE=1024
+# CONFIG_IP_NF_SET_IPHASH is not set
+# CONFIG_IP_NF_SET_IPMAP is not set
+# CONFIG_IP_NF_SET_IPPORTHASH is not set
+# CONFIG_IP_NF_SET_IPTREE is not set
+# CONFIG_IP_NF_SET_IPTREEMAP is not set
+# CONFIG_IP_NF_SET is not set
+# CONFIG_IP_NF_SET_MACIPMAP is not set
+CONFIG_IP_NF_SET_MAX=256
+# CONFIG_IP_NF_SET_NETHASH is not set
+# CONFIG_IP_NF_SET_PORTMAP is not set
+# CONFIG_IP_NF_SIP is not set
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_IMQ is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_MASQUERADE is not set
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_IP_NF_TARGET_REJECT is not set
+# CONFIG_IP_NF_TARGET_ROUTE is not set
+# CONFIG_IP_NF_TARGET_SAME is not set
+# CONFIG_IP_NF_TARGET_SET is not set
+# CONFIG_IP_NF_TARGET_TOS is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+# CONFIG_IP_NF_TFTP is not set
+# CONFIG_IP_PIMSM_V1 is not set
+# CONFIG_IP_PIMSM_V2 is not set
+# CONFIG_IP_PNP is not set
+CONFIG_IP_ROUTE_FWMARK=y
+CONFIG_IP_ROUTE_MULTIPATH_CACHED=y
+# CONFIG_IP_ROUTE_MULTIPATH_DRR is not set
+# CONFIG_IP_ROUTE_MULTIPATH_RANDOM is not set
+# CONFIG_IP_ROUTE_MULTIPATH_RR is not set
+# CONFIG_IP_ROUTE_MULTIPATH_WRANDOM is not set
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_SCTP is not set
+CONFIG_IPSEC_NAT_TRAVERSAL=y
+# CONFIG_IPV6 is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTE_INFO is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_SIT_6RD is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IP_VS is not set
+# CONFIG_IPW2100_DEBUG is not set
+# CONFIG_IPW2100 is not set
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2200_DEBUG is not set
+# CONFIG_IPW2200 is not set
+CONFIG_IPW2200_MONITOR=y
+# CONFIG_IPW2200_PROMISCUOUS is not set
+# CONFIG_IPW2200_QOS is not set
+# CONFIG_IPW2200_RADIOTAP is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_IPX is not set
+# CONFIG_IRDA is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_ISCSI_TCP is not set
+CONFIG_ISDN=y
+# CONFIG_ISDN_I4L is not set
+# CONFIG_ISDN_AUDIO is not set
+# CONFIG_ISDN_CAPI is not set
+# CONFIG_ISDN_CAPI_CAPIDRV is not set
+# CONFIG_ISDN_DIVERSION is not set
+# CONFIG_ISDN_DRV_ACT2000 is not set
+# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set
+# CONFIG_ISDN_DRV_EICON is not set
+# CONFIG_ISDN_DRV_GIGASET is not set
+# CONFIG_ISDN_DRV_HISAX is not set
+# CONFIG_ISDN_DRV_ICN is not set
+# CONFIG_ISDN_DRV_LOOP is not set
+# CONFIG_ISDN_DRV_PCBIT is not set
+# CONFIG_ISDN_DRV_SC is not set
+# CONFIG_ISDN_DRV_TPAM is not set
+# CONFIG_ISDN_WITH_ABC is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_ISO9660_FS is not set
+# CONFIG_IWL3945 is not set
+# CONFIG_IWLAGN is not set
+# CONFIG_IWLCORE is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_IWMC3200TOP is not set
+# CONFIG_IXGB is not set
+# CONFIG_JBD2_DEBUG is not set
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_JBD is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_FS=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_ZLIB is not set
+CONFIG_JFFS2_LZMA=y
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_STATISTICS is not set
+# CONFIG_JME is not set
+CONFIG_JOLIET=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_GZIP is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_LZO is not set
+# CONFIG_KEXEC is not set
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYS is not set
+# CONFIG_KGDB is not set
+# CONFIG_KMEMTRACE is not set
+CONFIG_KMOD=y
+# CONFIG_KPROBES is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_KSM is not set
+# CONFIG_KSZ884X_PCI is not set
+# CONFIG_LANMEDIA is not set
+# CONFIG_LAPB is not set
+# CONFIG_LASAT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_LBDAF=y
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_LEDS_ALIX is not set
+# CONFIG_LEDS_BD2802 is not set
+CONFIG_LEDS_CLASS=y
+# CONFIG_LEDS_DAC124S085 is not set
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LT3593 is not set
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+# CONFIG_LEDS_TRIGGER_MORSE is not set
+CONFIG_LEDS_TRIGGER_NETDEV=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_LIB80211_CRYPT_CCMP is not set
+# CONFIG_LIB80211_CRYPT_TKIP is not set
+# CONFIG_LIB80211_CRYPT_WEP is not set
+# CONFIG_LIB80211_DEBUG is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_LIBCRC32C is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_LIBERTAS_USB is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_LIBIPW_DEBUG is not set
+# CONFIG_LINE6_USB is not set
+# CONFIG_LKDTM is not set
+# CONFIG_LLC2 is not set
+CONFIG_LLC=y
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_LOCKD is not set
+CONFIG_LOCKD_V4=y
+# CONFIG_LOCK_STAT is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_LOGFS is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGO is not set
+# CONFIG_LPC_SCH is not set
+# CONFIG_LSF is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_LTPC is not set
+# CONFIG_LXT_PHY is not set
+CONFIG_LZMA_COMPRESS=y
+CONFIG_LZMA_DECOMPRESS=y
+CCONFIG_MAC80211_DEFAULT_PS_VALUE=1
+CONFIG_MAC80211_DEFAULT_PS=y
+# CONFIG_MAC80211 is not set
+# CONFIG_MAC_EMUMOUSEBTN is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_MACVTAP is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MARKERS is not set
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_MD is not set
+# CONFIG_ME4000 is not set
+# CONFIG_MEDIA_ATTACH is not set
+# CONFIG_MEDIA_SUPPORT is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_MEILHAUS is not set
+# CONFIG_MEMORY_FAILURE is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_MIGRATION is not set
+CONFIG_MII=y
+CONFIG_MINI_FO=y
+# CONFIG_MINIX_FS is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_MIPS_FPU_EMU is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_MISDN_AVMFRITZ is not set
+# CONFIG_MISDN_HFCPCI is not set
+# CONFIG_MISDN_HFCUSB is not set
+# CONFIG_MISDN_INFINEON is not set
+# CONFIG_MISDN is not set
+# CONFIG_MISDN_NETJET is not set
+# CONFIG_MISDN_SPEEDFAX is not set
+# CONFIG_MISDN_W6692 is not set
+# CONFIG_MKISS is not set
+# CONFIG_MMC_ARMMMCI is not set
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_MMC_BLOCK is not set
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC is not set
+# CONFIG_MMC_MVSDIO is not set
+# CONFIG_MMC_S3C is not set
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SDRICOH_CS is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_TEST is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_VIA_SDMMC is not set
+CONFIG_MMU=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_MSDOS_FS is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_AR7_PARTS is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_BLKDEVS=y
+# CONFIG_MTD_BLOCK2MTD is not set
+CONFIG_MTD_BLOCK=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_GPIO_ADDR is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_JEDECPROBE is not set
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_MYLOADER_PARTS is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_OOPS is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_ROM is not set
+CONFIG_MTD_ROOTFS_ROOT_DEV=y
+CONFIG_MTD_ROOTFS_SPLIT=y
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_UBI is not set
+CONFIG_MTD=y
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_MVSWITCH_PHY is not set
+# CONFIG_MWAVE is not set
+# CONFIG_MWL8K is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_NET_9P is not set
+# CONFIG_NET_ACT_GACT is not set
+# CONFIG_NET_ACT_IPT is not set
+# CONFIG_NET_ACT_MIRRED is not set
+# CONFIG_NET_ACT_NAT is not set
+# CONFIG_NET_ACT_PEDIT is not set
+# CONFIG_NET_ACT_POLICE is not set
+# CONFIG_NET_ACT_SIMP is not set
+CONFIG_NET_ACT_SKBEDIT=y
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_CLS_BASIC=y
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_CLS_FW is not set
+CONFIG_NET_CLS_IND=y
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_U32 is not set
+CONFIG_NET_CLS=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETDEBUG is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEVICES_MULTIQUEUE=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_NET_EMATCH_CMP is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_EMATCH_META is not set
+# CONFIG_NET_EMATCH_NBYTE is not set
+CONFIG_NET_EMATCH_STACK=32
+# CONFIG_NET_EMATCH_TEXT is not set
+# CONFIG_NET_EMATCH_U32 is not set
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_ETHERNET=y
+# CONFIG_NET_FC is not set
+CONFIG_NETFILTER_ADVANCED=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_TPROXY is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG is not set
+# CONFIG_NETFILTER_XT_MATCH_LAYER7 is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATE is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
+# CONFIG_NETFILTER_XT_TARGET_IMQ is not set
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER=y
+CONFIG_NET_IPGRE_BROADCAST=y
+# CONFIG_NET_IPGRE is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_NET_KEY is not set
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_NET_PCI=y
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_NETPOLL is not set
+CONFIG_NET_RADIO=y
+# CONFIG_NETROM is not set
+# CONFIG_NET_SB1000 is not set
+# CONFIG_NET_SCH_ATM is not set
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_DRR is not set
+# CONFIG_NET_SCH_DSMARK is not set
+CONFIG_NET_SCHED=y
+# CONFIG_NET_SCH_ESFQ is not set
+CONFIG_NET_SCH_ESFQ_NFCT=y
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_INGRESS is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_RR is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_NET_WIRELESS_RTNETLINK=y
+CONFIG_NET_WIRELESS=y
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETXEN_NIC is not set
+CONFIG_NET=y
+# CONFIG_NEW_GPIO is not set
+CONFIG_NEW_LEDS=y
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_ENABLED=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_FTP is not set
+# CONFIG_NF_CONNTRACK_H323 is not set
+# CONFIG_NF_CONNTRACK_IPV4 is not set
+# CONFIG_NF_CONNTRACK_IPV6 is not set
+# CONFIG_NF_CONNTRACK_IRC is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_NF_CONNTRACK_RTSP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_NF_CONNTRACK_TFTP is not set
+# CONFIG_NF_CT_ACCT is not set
+# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_GRE is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_FTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_IRC is not set
+# CONFIG_NF_NAT is not set
+CONFIG_NF_NAT_NEEDED=y
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_PROTO_GRE is not set
+# CONFIG_NF_NAT_RTSP is not set
+# CONFIG_NF_NAT_SIP is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NFS_ACL_SUPPORT is not set
+CONFIG_NFS_COMMON=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V2_ACL is not set
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V4 is not set
+# CONFIG_NFS_FS is not set
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFTL is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NL80211=y
+CONFIG_NLATTR=y
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_NORTEL_HERMES is not set
+# CONFIG_NOZOMI is not set
+# CONFIG_NS83820 is not set
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_FS is not set
+# CONFIG_NTFS_RW is not set
+# CONFIG_NVRAM is not set
+# CONFIG_OC_ETM is not set
+# CONFIG_OCF_BENCH is not set
+# CONFIG_OCF_C7108 is not set
+# CONFIG_OCF_CRYPTOCTEON is not set
+# CONFIG_OCF_EP80579 is not set
+# CONFIG_OCF_HIFNHIPP is not set
+# CONFIG_OCF_HIFN is not set
+# CONFIG_OCF_IXP4XX is not set
+# CONFIG_OCF_KIRKWOOD is not set
+# CONFIG_OCF_OCF is not set
+# CONFIG_OCF_OCFNULL is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_OCF_SAFE is not set
+# CONFIG_OCF_TALITOS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_ORION_WATCHDOG is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_P54_COMMON is not set
+CONFIG_PACKET_MMAP=y
+CONFIG_PACKET=y
+# CONFIG_PAGE_POISONING is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PANTHERLORD_FF is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PARPORT_PC is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_ATP867X is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CS5535 is not set
+# CONFIG_PATA_CS5536 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_ISAPNP is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_QDI is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_WINBOND_VLB is not set
+# CONFIG_PC300TOO is not set
+# CONFIG_PCCARD is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_PCI200SYN is not set
+# CONFIG_PCI_ATMEL is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_DISABLE_COMMON_QUIRKS is not set
+# CONFIG_PCIEAER_INJECT is not set
+# CONFIG_PCIEASPM is not set
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCI_HERMES is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCIPCWATCHDOG is not set
+CONFIG_PCI_QUIRKS=y
+# CONFIG_PCI_STUB is not set
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCI=y
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_ATMEL is not set
+# CONFIG_PCMCIA_DEBUG is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_HERMES is not set
+# CONFIG_PCMCIA_IOCTL is not set
+# CONFIG_PCMCIA is not set
+# CONFIG_PCMCIA_LOAD_CIS is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_PCMCIA_SPECTRUM is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PCMCIA_XIRCOM is not set
+# CONFIG_PCNET32 is not set
+# CONFIG_PCSPKR_PLATFORM is not set
+# CONFIG_PD6729 is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PHANTOM is not set
+# CONFIG_PHONE is not set
+# CONFIG_PHONET is not set
+# CONFIG_PHYLIB is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+# CONFIG_PID_NS is not set
+# CONFIG_PLAN9AUTH is not set
+CONFIG_PLIST=y
+# CONFIG_PLX_HERMES is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PM is not set
+# CONFIG_POHMELFS is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_PPC_4K_PAGES=y
+CONFIG_PPC4xx_GPIO=y
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+# CONFIG_PPC_EMULATED_STATS is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_DEFLATE is not set
+CONFIG_PPP_FILTER=y
+# CONFIG_PPP is not set
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPPOATM is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_TI_DAC7512 is not set
+CONFIG_TINY_RCU=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_PRINTK=y
+# CONFIG_PRISM2_USB is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_PROBE_INITRD_HEADER is not set
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROFILING is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_QEMU is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_QT2160 is not set
+# CONFIG_QUOTA is not set
+# CONFIG_R3964 is not set
+# CONFIG_R6040 is not set
+# CONFIG_R8169 is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+# CONFIG_RAID_ATTRS is not set
+CONFIG_RAMFS=y
+# CONFIG_RAR_REGISTER is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RDC_17F3101X is not set
+# CONFIG_RD_GZIP is not set
+CONFIG_RD_LZMA=y
+# CONFIG_RD_LZO is not set
+# CONFIG_RDS is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_RELAY is not set
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_RFKILL_INPUT is not set
+# CONFIG_RFKILL is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_ROSE is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_RT2860 is not set
+# CONFIG_RT2870 is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_RT3070 is not set
+# CONFIG_RT3090 is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_RTC_DEBUG is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+# CONFIG_RTC_DRV_PCF50606 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_RTC7301 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+CONFIG_RTC_HCTOSYS=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_RTL8187SE is not set
+# CONFIG_RTL8192E is not set
+# CONFIG_RTL8192U is not set
+# CONFIG_RTL8192SU is not set
+# CONFIG_RTL8306_PHY is not set
+# CONFIG_RTL8366_SMI is not set
+# CONFIG_RTL8366S_PHY_DEBUG_FS is not set
+# CONFIG_RTL8366S_PHY is not set
+# CONFIG_RTL8366RB_PHY is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_RUNTIME_DEBUG is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_S2IO is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_SATA_PMP is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SBC_FITPC2_WATCHDOG is not set
+# CONFIG_SC92031 is not set
+# CONFIG_SCC is not set
+# CONFIG_SCHED_BFS is not set
+CONFIG_SCHED_CFS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
+# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_SCSI_BFA_FC is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_ESP_CORE is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_HPSA is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_MPT2SAS is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PM8001 is not set
+# CONFIG_SCSI_PMCRAID is not set
+CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+# CONFIG_SCSI_SEAGATE is not set
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_ULTRASTOR is not set
+CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SECCOMP is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADT7411 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_AMC6821 is not set
+# CONFIG_SENSORS_APPLESMC is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ASC7621 is not set
+# CONFIG_SENSORS_ATK0110 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_CORETEMP is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCHMD is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_HDAPS is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_K8TEMP is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_UARTLITE is not set
+# CONFIG_SERIO is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SFI is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_SHAPER is not set
+CONFIG_SHMEM=y
+CONFIG_SIGNALFD=y
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2_DEBUG is not set
+# CONFIG_SKY2 is not set
+CONFIG_SLABINFO=y
+CONFIG_SLAB=y
+# CONFIG_SLHC is not set
+# CONFIG_SLICOSS is not set
+# CONFIG_SLIP is not set
+# CONFIG_SLOB is not set
+# CONFIG_SLOW_WORK_DEBUG is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_SLUB is not set
+# CONFIG_SMARTJOYPLUS_FF is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMC91X is not set
+# CONFIG_SMP is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_SMSC9420 is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+# CONFIG_SND_AD1816A is not set
+# CONFIG_SND_AD1848 is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ADLIB is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ALS100 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT2320 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMI8330 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_CS4231 is not set
+# CONFIG_SND_CS4232 is not set
+# CONFIG_SND_CS4236 is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
+# CONFIG_SND_CTXFI is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DT019X is not set
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1688 is not set
+# CONFIG_SND_ES18XX is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_ES968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_GUSCLASSIC is not set
+# CONFIG_SND_GUSEXTREME is not set
+# CONFIG_SND_GUSMAX is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_HWDEP is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGODJX is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_INTERWAVE is not set
+# CONFIG_SND_INTERWAVE_STB is not set
+# CONFIG_SND_ISA is not set
+# CONFIG_SND is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_LX6464ES is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_MIPS is not set
+# CONFIG_SND_MIRO is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_OPL3SA2 is not set
+# CONFIG_SND_OPTI92X_AD1848 is not set
+# CONFIG_SND_OPTI92X_CS4231 is not set
+# CONFIG_SND_OPTI93X is not set
+CONFIG_SND_OSSEMUL=y
+# CONFIG_SND_OXYGEN is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_PCMCIA is not set
+# CONFIG_SND_PCM is not set
+# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_PDAUDIOCF is not set
+# CONFIG_SND_RAWMIDI is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RTCTIMER is not set
+# CONFIG_SND_SB16 is not set
+# CONFIG_SND_SB8 is not set
+# CONFIG_SND_SBAWE is not set
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_SIS7019 is not set
+# CONFIG_SND_SGALAXY is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_SSCAPE is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_TIMER is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_UA101 is not set
+# CONFIG_SND_USB_US122L is not set
+# CONFIG_SND_USB_USX2Y is not set
+CONFIG_SND_USB=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_WAVEFRONT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_SONYPI is not set
+# CONFIG_SONY_LAPTOP is not set
+# CONFIG_SOUND is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_DEBUG is not set
+# CONFIG_SPI_DESIGNWARE is not set
+# CONFIG_SPI_GPIO_OLD is not set
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_SPI_ORION is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPINLOCK_TEST is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_SQUASHFS_LZMA=y
+CONFIG_SQUASHFS_SUPPORT_ZLIB=y
+# CONFIG_SQUASHFS_VMALLOC is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SSB_DEBUG is not set
+# CONFIG_SSB is not set
+# CONFIG_SSB_PCMCIAHOST is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB_SDIOHOST is not set
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSFDC is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_STACKTRACE_SUPPORT=y
+# CONFIG_STAGING_EXCLUDE_BUILD is not set
+CONFIG_STAGING=y
+CONFIG_STANDALONE=y
+CONFIG_STDBINUTILS=y
+# CONFIG_STE10XP is not set
+CONFIG_STP=y
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_STRIP is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_GSS is not set
+# CONFIG_SUNRPC is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SWAP=y
+# CONFIG_SWCONFIG is not set
+# CONFIG_SYNCLINK_CS is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL=y
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_SYSFS=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_SYSV_FS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_SYSVIPC=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_TCIC is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_CUBIC is not set
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_VENO is not set
+CONFIG_TCP_CONG_WESTWOOD=y
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_TEXTSEARCH_BM is not set
+# CONFIG_TEXTSEARCH_FSM is not set
+# CONFIG_TEXTSEARCH_KMP is not set
+CONFIG_TEXTSEARCH=y
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_TIFM_CORE is not set
+# CONFIG_TIGON3 is not set
+CONFIG_TIMERFD=y
+# CONFIG_TINY_SHMEM is not set
+# CONFIG_TIPC is not set
+# CONFIG_TLAN is not set
+# CONFIG_TMD_HERMES is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_TMPFS=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_FILTER is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_S3C2410 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_TRANZPORT is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_TR is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_TUNER_TEA5761 is not set
+# CONFIG_TUN is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_UDF_FS is not set
+CONFIG_UDF_NLS=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_UFS_FS is not set
+# CONFIG_UIO is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_UNEVICTABLE_LRU is not set
+# CONFIG_UNION_MOUNT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+CONFIG_UNIX=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AIPTEK is not set
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_APPLETOUCH is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATMEL is not set
+# CONFIG_USB_ATM is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_BELKIN=y
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_CPC is not set
+# CONFIG_USB_CXACRU is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_DABUSB is not set
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_ET61X251 is not set
+CONFIG_USB_EZUSB=y
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_G_MULTI is not set
+# CONFIG_USB_G_NOKIA is not set
+# CONFIG_USB_GL860 is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_GSPCA_BENQ is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_CPIA1 is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA is not set
+# CONFIG_USB_GSPCA_JEILINJ is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_OV534_9 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7302 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+CONFIG_USB_GSPCA_SN9C20X_EVDEV=y
+# CONFIG_USB_GSPCA_SN9C2028 is not set
+# CONFIG_USB_GSPCA_SN9C20X is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_STV0680 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_USB_HIDDEV is not set
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HID is not set
+# CONFIG_USB_HSO is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_IP_COMMON is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_KC2190 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LIBUSUAL is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_NET_AX8817X is not set
+# CONFIG_USB_NET_CDC_EEM is not set
+# CONFIG_USB_NET_CDCETHER is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_SMSC75XX is not set
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_OHCI_HCD_PCI is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OHCI_HCD_PPC_SOC is not set
+# CONFIG_USB_OHCI_HCD_SSB is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_PWC_INPUT_EVDEV is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_QCAUX is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_QUATECH2 is not set
+# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_SIERRA_NET is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_SPEEDTOUCH is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_TMC is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_UEAGLEATM is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_VICAM is not set
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+# CONFIG_USB_VIDEO_CLASS is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_W9968CF is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_WUSB_CBAF is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_XHCI_HCD is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_XUSBATM is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_UWB is not set
+# CONFIG_VETH is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_VGA_ARB is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT848 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_CAFE_CCIC is not set
+# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_CX231XX is not set
+# CONFIG_VIDEO_CX2341X is not set
+# CONFIG_VIDEO_CX25840 is not set
+# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_DPC is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_GO7007 is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_IR_I2C is not set
+# CONFIG_VIDEO_IVTV is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_MEDIA is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_MXB is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_VIDEO_PMS is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_SAA6588 is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA7111 is not set
+# CONFIG_VIDEO_SAA7114 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7134 is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_TVP7002 is not set
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_USBVISION is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_VIDEO_V4L1 is not set
+# CONFIG_VIDEO_V4L2_COMMON is not set
+# CONFIG_VIDEO_V4L2 is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+# CONFIG_VIDEO_VPX3220 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_ZORAN is not set
+# CONFIG_VIRQ_DEBUG is not set
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_VIRTUALIZATION is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_VLAN_8021Q_GVRP is not set
+CONFIG_VLAN_8021Q=y
+# CONFIG_VME_BUS is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_VMSPLIT_1G is not set
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_2G_OPT is not set
+# CONFIG_VMSPLIT_3G_OPT is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMXNET3 is not set
+# CONFIG_VT6655 is not set
+# CONFIG_VT6656 is not set
+# CONFIG_VT is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_W1_CON is not set
+# CONFIG_W1 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS2490 is not set
+# CONFIG_W1_MASTER_GPIO is not set
+# CONFIG_W1_MASTER_MATROX is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W83627HF_WDT is not set
+# CONFIG_W83697HF_WDT is not set
+# CONFIG_W83877F_WDT is not set
+# CONFIG_W83977F_WDT is not set
+# CONFIG_WAN is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_WANXL is not set
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WDTPCI is not set
+# CONFIG_WIMAX is not set
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS=y
+CONFIG_WLAN_80211=y
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN=y
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_WR_PPMC is not set
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_PRIV=y
+CONFIG_WEXT_SPY=y
+# CONFIG_X25 is not set
+# CONFIG_XFRM_IPCOMP is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_USER is not set
+CONFIG_XFRM=y
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XILINX_EMACLITE is not set
+# CONFIG_XILINX_LL_TEMAC is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_YAM is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_YENTA is not set
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+# CONFIG_YENTA_TI is not set
+# CONFIG_YENTA_TOSHIBA is not set
+# CONFIG_ZD1211RW_DEBUG is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_ZISOFS_FS is not set
+CONFIG_ZISOFS=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ZONE_DMA=y
+CONFIG_DEFAULT_SECURITY_DAC=y
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
diff --git a/target/linux/generic/config-2.6.35 b/target/linux/generic/config-2.6.35
new file mode 100644
index 0000000000..7e4d41ad2a
--- /dev/null
+++ b/target/linux/generic/config-2.6.35
@@ -0,0 +1,3003 @@
+# CONFIG_6PACK is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_9P_FS is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_AB4500_CORE is not set
+# CONFIG_AB8500_CORE is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_ACENIC is not set
+# CONFIG_ACPI_POWER_METER is not set
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_ADIS16255 is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_ADFS_FS is not set
+# CONFIG_ADM6996_PHY is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_AGP is not set
+CONFIG_AIO=y
+# CONFIG_AIRO_CS is not set
+# CONFIG_AIRO is not set
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_ALTERA_PCIE_CHDMA is not set
+# CONFIG_R8187SE is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ANDROID is not set
+CONFIG_ANON_INODES=y
+# CONFIG_APPLICOM is not set
+# CONFIG_AR8216_PHY is not set
+# CONFIG_AR9170_USB is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCNET is not set
+# CONFIG_ARM_UNWIND is not set
+CONFIG_ARPD=y
+# CONFIG_ARTHUR is not set
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_ASUS_OLED is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_AT24 is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_ATA_ACPI is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_ATA is not set
+# CONFIG_ATALK is not set
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_ATA_SFF=y
+# CONFIG_ATA_VERBOSE_ERROR is not set
+# CONFIG_ATH5K is not set
+# CONFIG_ATH9K is not set
+# CONFIG_ATL1C is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL2 is not set
+# CONFIG_ATM_AMBASSADOR is not set
+CONFIG_ATM_BR2684_IPFILTER=y
+# CONFIG_ATM_BR2684 is not set
+# CONFIG_ATM_CLIP is not set
+CONFIG_ATM_CLIP_NO_ICMP=y
+# CONFIG_ATM_DRIVERS is not set
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATMEL is not set
+# CONFIG_ATM_ENI is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_FORE200E is not set
+# CONFIG_ATM_FORE200E_MAYBE is not set
+# CONFIG_ATM_HE is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_IA is not set
+# CONFIG_ATM_IDT77252 is not set
+# CONFIG_ATM is not set
+# CONFIG_ATM_LANAI is not set
+# CONFIG_ATM_LANE is not set
+# CONFIG_ATM_MPOA is not set
+# CONFIG_ATM_NICSTAR is not set
+# CONFIG_ATM_SOLOS is not set
+# CONFIG_ATM_TCP is not set
+# CONFIG_ATM_ZATM is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_AUDIT is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_AX25_DAMA_SLAVE is not set
+# CONFIG_AX25 is not set
+# CONFIG_AX88796 is not set
+# CONFIG_B3DFG is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_B44 is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+CONFIG_BASE_FULL=y
+CONFIG_BASE_SMALL=0
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BATTERY_BQ27000_HDQ is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_BAYCOM_EPP is not set
+# CONFIG_BAYCOM_PAR is not set
+# CONFIG_BAYCOM_SER_FDX is not set
+# CONFIG_BAYCOM_SER_HDX is not set
+CONFIG_BCM43XX_DEBUG=y
+CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
+# CONFIG_BCM43XX_DMA_MODE is not set
+CONFIG_BCM43XX_DMA=y
+# CONFIG_BCM43XX is not set
+# CONFIG_BCM43XX_PIO_MODE is not set
+CONFIG_BCM43XX_PIO=y
+# CONFIG_BE2ISCSI is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_BINARY_PRINTF is not set
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_BLINK is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_ATIIXP is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_CMD640 is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_CS5535 is not set
+# CONFIG_BLK_DEV_CS5536 is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_DELKIN is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_HD_IDE is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_BLK_DEV_HD_ONLY is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_IDEACPI is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_RZ1000 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SIS5513 is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_BLK_DEV=y
+CONFIG_BLOCK=y
+# CONFIG_BNX2 is not set
+# CONFIG_BONDING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_BPQETHER is not set
+CONFIG_BRIDGE=y
+# CONFIG_BRIDGE_EBT_802_3 is not set
+# CONFIG_BRIDGE_EBT_AMONG is not set
+# CONFIG_BRIDGE_EBT_ARP is not set
+# CONFIG_BRIDGE_EBT_ARPREPLY is not set
+# CONFIG_BRIDGE_EBT_BROUTE is not set
+# CONFIG_BRIDGE_EBT_DNAT is not set
+# CONFIG_BRIDGE_EBT_IP6 is not set
+# CONFIG_BRIDGE_EBT_IP is not set
+# CONFIG_BRIDGE_EBT_LIMIT is not set
+# CONFIG_BRIDGE_EBT_LOG is not set
+# CONFIG_BRIDGE_EBT_MARK is not set
+# CONFIG_BRIDGE_EBT_MARK_T is not set
+# CONFIG_BRIDGE_EBT_NFLOG is not set
+# CONFIG_BRIDGE_EBT_PKTTYPE is not set
+# CONFIG_BRIDGE_EBT_REDIRECT is not set
+# CONFIG_BRIDGE_EBT_SNAT is not set
+# CONFIG_BRIDGE_EBT_STP is not set
+# CONFIG_BRIDGE_EBT_T_FILTER is not set
+# CONFIG_BRIDGE_EBT_T_NAT is not set
+# CONFIG_BRIDGE_EBT_ULOG is not set
+# CONFIG_BRIDGE_EBT_VLAN is not set
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_BRIDGE_NETFILTER is not set
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_BROADCOM_PHY is not set
+CONFIG_BROKEN_ON_SMP=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BT_ATH3K is not set
+# CONFIG_BT_BNEP is not set
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+# CONFIG_BT_CMTP is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIDTL1 is not set
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIUSB is not set
+CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_HIDP is not set
+# CONFIG_BT is not set
+# CONFIG_BT_L2CAP is not set
+# CONFIG_BT_MRVL is not set
+# CONFIG_BT_RFCOMM is not set
+CONFIG_BT_RFCOMM_TTY=y
+# CONFIG_BTRFS_FS is not set
+# CONFIG_BT_SCO is not set
+CONFIG_BUG=y
+# CONFIG_C2PORT is not set
+# CONFIG_CAIF is not set
+# CONFIG_CAN is not set
+# CONFIG_CAPI_AVM is not set
+# CONFIG_CAPI_EICON is not set
+# CONFIG_CAPI_TRACE is not set
+CONFIG_CARDBUS=y
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_CASSINI is not set
+# CONFIG_CB710_CORE is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CFG80211 is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_CIFS is not set
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CLASSIC_RCU=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_CLS_U32_PERF=y
+CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CNIC is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_COMEDI is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_CONSTRUCTORS=y
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CROSSCOMPILE=y
+CONFIG_CROSS_COMPILE=""
+# CONFIG_CRYPTO_AEAD is not set
+# CONFIG_CRYPTO_AES_586 is not set
+# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_ALGAPI=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_BLKCIPHER is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRC32C_INTEL is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_IFXMIPS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
+# CONFIG_CRYPTO_HASH is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_MANAGER is not set
+CONFIG_CRYPTO_MANAGER_NO_TESTS=y
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCBC is not set
+CONFIG_CRYPTO_PCOMP=y
+# CONFIG_CRYPTO_PRNG is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_RNG is not set
+# CONFIG_CRYPTO_SALSA20_586 is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_TWOFISH_586 is not set
+# CONFIG_CRYPTO_TWOFISH_COMMON is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+CONFIG_CRYPTO_UNLZMA=y
+# CONFIG_CRYPTO_VMAC is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ZLIB=y
+# CONFIG_CRYSTALHD is not set
+# CONFIG_CUSE is not set
+# CONFIG_DAB is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_DCB is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DECNET is not set
+CONFIG_DECOMPRESS_LZMA_NEEDED=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_BIC is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_CUBIC is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_HYBLA is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_DEFAULT_NOOP is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="westwood"
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_VENO is not set
+CONFIG_DEFAULT_WESTWOOD=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_DEVTMPFS_MOUNT is not set
+# CONFIG_DEVTMPFS is not set
+# CONFIG_DGRS is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DL2K is not set
+# CONFIG_DLM is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_DMA_ENGINE is not set
+# CONFIG_DMASCC is not set
+# CONFIG_DMATEST is not set
+# CONFIG_DM_LOG_USERSPACE is not set
+# CONFIG_DNET is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_DRM is not set
+# CONFIG_DS1682 is not set
+# CONFIG_DST is not set
+# CONFIG_DT3155 is not set
+# CONFIG_DTLK is not set
+# CONFIG_DUMMY is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DVB is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000 is not set
+# CONFIG_E100 is not set
+# CONFIG_ECHO is not set
+# CONFIG_ECONET is not set
+# CONFIG_EDAC is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_ELF_CORE is not set
+CONFIG_EMBEDDED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_EPIC100 is not set
+CONFIG_EPOLL=y
+# CONFIG_EQUALIZER is not set
+# CONFIG_ET131X is not set
+# CONFIG_ETHOC is not set
+CONFIG_EVENTFD=y
+# CONFIG_EVENT_TRACER is not set
+CONFIG_EXPERIMENTAL=y
+# CONFIG_EXPORTFS is not set
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_DEBUG is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_EXT4_USE_FOR_EXT23 is not set
+CONFIG_EXTRA_FIRMWARE=""
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_EZX_PCAP is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_FAT_FS is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_ARC is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_EARLYSUSPEND is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_GEODE is not set
+# CONFIG_FB_GOLDFISH is not set
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_LE80578 is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_N411 is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_PS3 is not set
+# CONFIG_FB_PXA is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FCOE_FNIC is not set
+# CONFIG_FCOE is not set
+# CONFIG_FDDI is not set
+# CONFIG_FEALNX is not set
+CONFIG_FIB_RULES=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_FIREWIRE is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_FORCEDETH is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_FREEZER is not set
+# CONFIG_FSCACHE is not set
+CONFIG_FSNOTIFY=y
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FTL is not set
+# CONFIG_FTRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_FUSE_FS is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SAS is not set
+# CONFIG_FUSION_SPI is not set
+CONFIG_FUTEX=y
+CONFIG_FW_LOADER=y
+CONFIG_GACT_PROB=y
+# CONFIG_GAMEPORT is not set
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_TIME=y
+# CONFIG_GIGASET_CAPI is not set
+# CONFIG_GIGASET_DEBUG is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_GPIO_ADP5588 is not set
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_CS5535 is not set
+# CONFIG_GPIO_DEVICE is not set
+# CONFIG_GPIO_IT8761E is not set
+# CONFIG_GPIO_LANGWELL is not set
+# CONFIG_GPIOLIB is not set
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_RDC321X is not set
+# CONFIG_GPIO_SCH is not set
+# CONFIG_GPIO_SYSFS is not set
+# CONFIG_GPIO_XILINX is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_HAMACHI is not set
+CONFIG_HAMRADIO=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_HAVE_MLOCK=y
+# CONFIG_HCALL_STATS is not set
+# CONFIG_HDLC_CISCO is not set
+# CONFIG_HDLC_FR is not set
+# CONFIG_HDLC is not set
+# CONFIG_HDLC_PPP is not set
+# CONFIG_HDLC_RAW_ETH is not set
+# CONFIG_HDLC_RAW is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_HECI is not set
+# CONFIG_HERMES is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_HID_3M_PCT is not set
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_BRIGHT is not set
+# CONFIG_HID_CANDO is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_COMPAT is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HID_DELL is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EGALAX is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MAGICMOUSE is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_MOSART is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PID is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_ROCCAT_KONE is not set
+# CONFIG_HID_ZYDACRON is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_HIGH_RES_TIMERS=y
+# CONFIG_HIPPI is not set
+# CONFIG_HOSTAP_CS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_HOSTAP_PCI is not set
+# CONFIG_HOSTAP_PLX is not set
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_HOTPLUG_PCI is not set
+CONFIG_HOTPLUG=y
+# CONFIG_HP100 is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_HVC_UDBG is not set
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+# CONFIG_HW_RANDOM_AMD is not set
+# CONFIG_HW_RANDOM_GEODE is not set
+# CONFIG_HW_RANDOM_INTEL is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_HW_RANDOM_VIA is not set
+# CONFIG_HYPERV is not set
+# CONFIG_HYSDN is not set
+CONFIG_HZ=100
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_1024 is not set
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_48 is not set
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCA is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_CHARDEV is not set
+# CONFIG_I2C_COMPAT is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_ELEKTOR is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_HELPER_AUTO is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_IBM_IIC is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_SMBUS is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_XILINX is not set
+# CONFIG_I2O is not set
+# CONFIG_I82092 is not set
+# CONFIG_I82365 is not set
+# CONFIG_IBM_ASM is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_IDE_GD is not set
+# CONFIG_IDE is not set
+CONFIG_IDE_MAX_HWIFS=4
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_IDE_PHISON is not set
+CONFIG_IDE_PROC_FS=y
+# CONFIG_IDE_TASK_IOCTL is not set
+# CONFIG_IEEE1394_DV1394 is not set
+# CONFIG_IEEE1394_ETH1394 is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_IEEE1394_OHCI1394 is not set
+# CONFIG_IEEE1394_PCILYNX is not set
+# CONFIG_IEEE1394_RAWIO is not set
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+# CONFIG_IEEE1394_VIDEO1394 is not set
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_IEEE80211_CRYPT_WEP is not set
+# CONFIG_IEEE80211_DEBUG is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_IEEE80211_SOFTMAC is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_IFB is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_IIO is not set
+# CONFIG_RAMZSWAP is not set
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_IKCONFIG_PROC is not set
+# CONFIG_IMAGE_CMDLINE_HACK is not set
+# CONFIG_IMQ_BEHAVIOR_AA is not set
+# CONFIG_IMQ_BEHAVIOR_AB is not set
+# CONFIG_IMQ_BEHAVIOR_BA is not set
+# CONFIG_IMQ_BEHAVIOR_BB is not set
+# CONFIG_IMQ is not set
+CONFIG_IMQ_NUM_DEVS=2
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_TCP_DIAG is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET=y
+# CONFIG_INFINIBAND is not set
+# CONFIG_INFTL is not set
+CONFIG_INIT_ENV_ARG_LIMIT=32
+# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
+# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
+CONFIG_INITRAMFS_COMPRESSION_NONE=y
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_APANEL is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATLAS_BTNS is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_GPIO is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_MIMIO is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT_PCSPKR is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_WINBOND_CIR is not set
+# CONFIG_INPUT_WISTRON_BTNS is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INSTRUMENTATION is not set
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IP1000 is not set
+# CONFIG_IP17XX_PHY is not set
+# CONFIG_IP6_NF_FILTER is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP6_NF_MANGLE is not set
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
+# CONFIG_IP6_NF_MATCH_LIMIT is not set
+# CONFIG_IP6_NF_MATCH_MH is not set
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_OWNER is not set
+# CONFIG_IP6_NF_MATCH_RT is not set
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_RAW is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+# CONFIG_IP6_NF_TARGET_IMQ is not set
+# CONFIG_IP6_NF_TARGET_LOG is not set
+# CONFIG_IP6_NF_TARGET_REJECT is not set
+# CONFIG_IP6_NF_TARGET_ROUTE is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IPC_NS is not set
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+# CONFIG_IP_NF_AMANDA is not set
+# CONFIG_IP_NF_ARPFILTER is not set
+# CONFIG_IP_NF_ARP_MANGLE is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK=y
+CONFIG_IP_NF_CT_ACCT=y
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+# CONFIG_IP_NF_FILTER is not set
+# CONFIG_IP_NF_FTP is not set
+# CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_IRC is not set
+# CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+# CONFIG_IP_NF_MATCH_IPP2P is not set
+# CONFIG_IP_NF_MATCH_OWNER is not set
+# CONFIG_IP_NF_MATCH_RECENT is not set
+# CONFIG_IP_NF_MATCH_SET is not set
+# CONFIG_IP_NF_MATCH_TIME is not set
+# CONFIG_IP_NF_MATCH_TOS is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+# CONFIG_IP_NF_NAT_AMANDA is not set
+# CONFIG_IP_NF_NAT_FTP is not set
+# CONFIG_IP_NF_NAT_H323 is not set
+# CONFIG_IP_NF_NAT_IRC is not set
+CONFIG_IP_NF_NAT_NEEDED=y
+# CONFIG_IP_NF_NAT_PPTP is not set
+# CONFIG_IP_NF_NAT_SIP is not set
+# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
+# CONFIG_IP_NF_NAT_TFTP is not set
+CONFIG_IP_NF_NAT=y
+# CONFIG_IP_NF_NETBIOS_NS is not set
+# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_SECURITY is not set
+CONFIG_IP_NF_SET_HASHSIZE=1024
+# CONFIG_IP_NF_SET_IPHASH is not set
+# CONFIG_IP_NF_SET_IPMAP is not set
+# CONFIG_IP_NF_SET_IPPORTHASH is not set
+# CONFIG_IP_NF_SET_IPTREE is not set
+# CONFIG_IP_NF_SET_IPTREEMAP is not set
+# CONFIG_IP_NF_SET is not set
+# CONFIG_IP_NF_SET_MACIPMAP is not set
+CONFIG_IP_NF_SET_MAX=256
+# CONFIG_IP_NF_SET_NETHASH is not set
+# CONFIG_IP_NF_SET_PORTMAP is not set
+# CONFIG_IP_NF_SIP is not set
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_IMQ is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_MASQUERADE is not set
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_IP_NF_TARGET_REJECT is not set
+# CONFIG_IP_NF_TARGET_ROUTE is not set
+# CONFIG_IP_NF_TARGET_SAME is not set
+# CONFIG_IP_NF_TARGET_SET is not set
+# CONFIG_IP_NF_TARGET_TOS is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+# CONFIG_IP_NF_TFTP is not set
+# CONFIG_IP_PIMSM_V1 is not set
+# CONFIG_IP_PIMSM_V2 is not set
+# CONFIG_IP_PNP is not set
+CONFIG_IP_ROUTE_FWMARK=y
+CONFIG_IP_ROUTE_MULTIPATH_CACHED=y
+# CONFIG_IP_ROUTE_MULTIPATH_DRR is not set
+# CONFIG_IP_ROUTE_MULTIPATH_RANDOM is not set
+# CONFIG_IP_ROUTE_MULTIPATH_RR is not set
+# CONFIG_IP_ROUTE_MULTIPATH_WRANDOM is not set
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_SCTP is not set
+CONFIG_IPSEC_NAT_TRAVERSAL=y
+# CONFIG_IPV6 is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTE_INFO is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_SIT_6RD is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IP_VS is not set
+# CONFIG_IPW2100_DEBUG is not set
+# CONFIG_IPW2100 is not set
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2200_DEBUG is not set
+# CONFIG_IPW2200 is not set
+CONFIG_IPW2200_MONITOR=y
+# CONFIG_IPW2200_PROMISCUOUS is not set
+# CONFIG_IPW2200_QOS is not set
+# CONFIG_IPW2200_RADIOTAP is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_IPX is not set
+# CONFIG_IRDA is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_ISCSI_TCP is not set
+CONFIG_ISDN=y
+# CONFIG_ISDN_I4L is not set
+# CONFIG_ISDN_AUDIO is not set
+# CONFIG_ISDN_CAPI is not set
+# CONFIG_ISDN_CAPI_CAPIDRV is not set
+# CONFIG_ISDN_DIVERSION is not set
+# CONFIG_ISDN_DRV_ACT2000 is not set
+# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set
+# CONFIG_ISDN_DRV_EICON is not set
+# CONFIG_ISDN_DRV_GIGASET is not set
+# CONFIG_ISDN_DRV_HISAX is not set
+# CONFIG_ISDN_DRV_ICN is not set
+# CONFIG_ISDN_DRV_LOOP is not set
+# CONFIG_ISDN_DRV_PCBIT is not set
+# CONFIG_ISDN_DRV_SC is not set
+# CONFIG_ISDN_DRV_TPAM is not set
+# CONFIG_ISDN_WITH_ABC is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_ISO9660_FS is not set
+# CONFIG_IWL3945 is not set
+# CONFIG_IWLAGN is not set
+# CONFIG_IWLCORE is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_IWMC3200TOP is not set
+# CONFIG_IXGB is not set
+# CONFIG_JBD2_DEBUG is not set
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_JBD is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_FS=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_ZLIB is not set
+CONFIG_JFFS2_LZMA=y
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_STATISTICS is not set
+# CONFIG_JME is not set
+CONFIG_JOLIET=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_GZIP is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_LZO is not set
+# CONFIG_KEXEC is not set
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYS is not set
+# CONFIG_KGDB is not set
+# CONFIG_KMEMTRACE is not set
+CONFIG_KMOD=y
+# CONFIG_KPROBES is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_KSM is not set
+# CONFIG_KSZ884X_PCI is not set
+# CONFIG_L2TP is not set
+# CONFIG_LANMEDIA is not set
+# CONFIG_LAPB is not set
+# CONFIG_LASAT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_LBDAF=y
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_LEDS_ALIX is not set
+# CONFIG_LEDS_BD2802 is not set
+CONFIG_LEDS_CLASS=y
+# CONFIG_LEDS_DAC124S085 is not set
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LT3593 is not set
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+# CONFIG_LEDS_TRIGGER_MORSE is not set
+CONFIG_LEDS_TRIGGER_NETDEV=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_LIB80211_CRYPT_CCMP is not set
+# CONFIG_LIB80211_CRYPT_TKIP is not set
+# CONFIG_LIB80211_CRYPT_WEP is not set
+# CONFIG_LIB80211_DEBUG is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_LIBCRC32C is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_LIBERTAS_USB is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_LIBIPW_DEBUG is not set
+# CONFIG_LINE6_USB is not set
+# CONFIG_LKDTM is not set
+# CONFIG_LLC2 is not set
+CONFIG_LLC=y
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_LOCKD is not set
+CONFIG_LOCKD_V4=y
+# CONFIG_LOCK_STAT is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_LOGFS is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGO is not set
+# CONFIG_LPC_SCH is not set
+# CONFIG_LSF is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_LTPC is not set
+# CONFIG_LXT_PHY is not set
+CONFIG_LZMA_COMPRESS=y
+CONFIG_LZMA_DECOMPRESS=y
+CCONFIG_MAC80211_DEFAULT_PS_VALUE=1
+CONFIG_MAC80211_DEFAULT_PS=y
+# CONFIG_MAC80211 is not set
+# CONFIG_MAC_EMUMOUSEBTN is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_MACVTAP is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MARKERS is not set
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_MD is not set
+# CONFIG_ME4000 is not set
+# CONFIG_MEDIA_ATTACH is not set
+# CONFIG_MEDIA_SUPPORT is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_MEILHAUS is not set
+# CONFIG_MEMORY_FAILURE is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_JANZ_CMODIO is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_RDC321X is not set
+# CONFIG_MFD_SM501 is not set
+CONFIG_MFD_SUPPORT=y
+# CONFIG_MFD_TC35892 is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_MIGRATION is not set
+CONFIG_MII=y
+CONFIG_MINI_FO=y
+# CONFIG_MINIX_FS is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_MIPS_FPU_EMU is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_MISDN_AVMFRITZ is not set
+# CONFIG_MISDN_HFCPCI is not set
+# CONFIG_MISDN_HFCUSB is not set
+# CONFIG_MISDN_INFINEON is not set
+# CONFIG_MISDN is not set
+# CONFIG_MISDN_NETJET is not set
+# CONFIG_MISDN_SPEEDFAX is not set
+# CONFIG_MISDN_W6692 is not set
+# CONFIG_MKISS is not set
+# CONFIG_MMC_ARMMMCI is not set
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_MMC_BLOCK is not set
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC is not set
+# CONFIG_MMC_MVSDIO is not set
+# CONFIG_MMC_S3C is not set
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SDRICOH_CS is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_TEST is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+# CONFIG_MMC_VIA_SDMMC is not set
+CONFIG_MMU=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_MSDOS_FS is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_AR7_PARTS is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_BLKDEVS=y
+# CONFIG_MTD_BLOCK2MTD is not set
+CONFIG_MTD_BLOCK=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_GPIO_ADDR is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_JEDECPROBE is not set
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_MYLOADER_PARTS is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_DENALI is not set
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xff108018
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND_RICOH is not set
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_OOPS is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_ROM is not set
+CONFIG_MTD_ROOTFS_ROOT_DEV=y
+CONFIG_MTD_ROOTFS_SPLIT=y
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_UBI is not set
+CONFIG_MTD=y
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_MVSWITCH_PHY is not set
+# CONFIG_MWAVE is not set
+# CONFIG_MWL8K is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_N_GSM is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_NET_9P is not set
+# CONFIG_NET_ACT_GACT is not set
+# CONFIG_NET_ACT_IPT is not set
+# CONFIG_NET_ACT_MIRRED is not set
+# CONFIG_NET_ACT_NAT is not set
+# CONFIG_NET_ACT_PEDIT is not set
+# CONFIG_NET_ACT_POLICE is not set
+# CONFIG_NET_ACT_SIMP is not set
+CONFIG_NET_ACT_SKBEDIT=y
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_CLS_BASIC=y
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_CLS_FW is not set
+CONFIG_NET_CLS_IND=y
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_U32 is not set
+CONFIG_NET_CLS=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETDEBUG is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEVICES_MULTIQUEUE=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_NET_EMATCH_CMP is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_EMATCH_META is not set
+# CONFIG_NET_EMATCH_NBYTE is not set
+CONFIG_NET_EMATCH_STACK=32
+# CONFIG_NET_EMATCH_TEXT is not set
+# CONFIG_NET_EMATCH_U32 is not set
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_ETHERNET=y
+# CONFIG_NET_FC is not set
+CONFIG_NETFILTER_ADVANCED=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_TPROXY is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG is not set
+# CONFIG_NETFILTER_XT_MATCH_LAYER7 is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATE is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
+# CONFIG_NETFILTER_XT_TARGET_IMQ is not set
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_TARGET_TEE is not set
+# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER=y
+CONFIG_NET_IPGRE_BROADCAST=y
+# CONFIG_NET_IPGRE is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_NET_KEY is not set
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_NET_PCI=y
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_NETPOLL is not set
+CONFIG_NET_RADIO=y
+# CONFIG_NETROM is not set
+# CONFIG_NET_SB1000 is not set
+# CONFIG_NET_SCH_ATM is not set
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_DRR is not set
+# CONFIG_NET_SCH_DSMARK is not set
+CONFIG_NET_SCHED=y
+# CONFIG_NET_SCH_ESFQ is not set
+CONFIG_NET_SCH_ESFQ_NFCT=y
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_INGRESS is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_RR is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_NET_WIRELESS_RTNETLINK=y
+CONFIG_NET_WIRELESS=y
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETXEN_NIC is not set
+CONFIG_NET=y
+# CONFIG_NEW_GPIO is not set
+CONFIG_NEW_LEDS=y
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_ENABLED=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_FTP is not set
+# CONFIG_NF_CONNTRACK_H323 is not set
+# CONFIG_NF_CONNTRACK_IPV4 is not set
+# CONFIG_NF_CONNTRACK_IPV6 is not set
+# CONFIG_NF_CONNTRACK_IRC is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_NF_CONNTRACK_RTSP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_NF_CONNTRACK_TFTP is not set
+# CONFIG_NF_CT_ACCT is not set
+# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_GRE is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_FTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_IRC is not set
+# CONFIG_NF_NAT is not set
+CONFIG_NF_NAT_NEEDED=y
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_PROTO_GRE is not set
+# CONFIG_NF_NAT_RTSP is not set
+# CONFIG_NF_NAT_SIP is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NFS_ACL_SUPPORT is not set
+CONFIG_NFS_COMMON=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V2_ACL is not set
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V4 is not set
+# CONFIG_NFS_FS is not set
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFTL is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NL80211=y
+CONFIG_NLATTR=y
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_NORTEL_HERMES is not set
+# CONFIG_NOZOMI is not set
+# CONFIG_NS83820 is not set
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_FS is not set
+# CONFIG_NTFS_RW is not set
+# CONFIG_NVRAM is not set
+# CONFIG_OC_ETM is not set
+# CONFIG_OCF_BENCH is not set
+# CONFIG_OCF_C7108 is not set
+# CONFIG_OCF_CRYPTOCTEON is not set
+# CONFIG_OCF_EP80579 is not set
+# CONFIG_OCF_HIFNHIPP is not set
+# CONFIG_OCF_HIFN is not set
+# CONFIG_OCF_IXP4XX is not set
+# CONFIG_OCF_KIRKWOOD is not set
+# CONFIG_OCF_OCF is not set
+# CONFIG_OCF_OCFNULL is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_OCF_SAFE is not set
+# CONFIG_OCF_TALITOS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_ORION_WATCHDOG is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_P54_COMMON is not set
+CONFIG_PACKET_MMAP=y
+CONFIG_PACKET=y
+# CONFIG_PAGE_POISONING is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PANTHERLORD_FF is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PARPORT_PC is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_ATP867X is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CS5535 is not set
+# CONFIG_PATA_CS5536 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_ISAPNP is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_QDI is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_WINBOND_VLB is not set
+# CONFIG_PC300TOO is not set
+# CONFIG_PCCARD is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_PCI200SYN is not set
+# CONFIG_PCI_ATMEL is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_DISABLE_COMMON_QUIRKS is not set
+# CONFIG_PCIEAER_INJECT is not set
+# CONFIG_PCIEASPM is not set
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCI_HERMES is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCIPCWATCHDOG is not set
+CONFIG_PCI_QUIRKS=y
+# CONFIG_PCI_STUB is not set
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCI=y
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_ATMEL is not set
+# CONFIG_PCMCIA_DEBUG is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_HERMES is not set
+# CONFIG_PCMCIA_IOCTL is not set
+# CONFIG_PCMCIA is not set
+# CONFIG_PCMCIA_LOAD_CIS is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_PCMCIA_SPECTRUM is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PCMCIA_XIRCOM is not set
+# CONFIG_PCNET32 is not set
+# CONFIG_PCSPKR_PLATFORM is not set
+# CONFIG_PD6729 is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PHANTOM is not set
+# CONFIG_PHONE is not set
+# CONFIG_PHONET is not set
+# CONFIG_PHYLIB is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+# CONFIG_PID_NS is not set
+# CONFIG_PLAN9AUTH is not set
+CONFIG_PLIST=y
+# CONFIG_PLX_HERMES is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PM is not set
+# CONFIG_POHMELFS is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_PPC_4K_PAGES=y
+CONFIG_PPC4xx_GPIO=y
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+# CONFIG_PPC_EMULATED_STATS is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_DEFLATE is not set
+CONFIG_PPP_FILTER=y
+# CONFIG_PPP is not set
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPPOATM is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_TI_DAC7512 is not set
+CONFIG_TINY_RCU=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_PRINTK=y
+# CONFIG_PRISM2_USB is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_PROBE_INITRD_HEADER is not set
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROFILING is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_QEMU is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_QT2160 is not set
+# CONFIG_QUOTA is not set
+# CONFIG_R3964 is not set
+# CONFIG_R6040 is not set
+# CONFIG_R8169 is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+# CONFIG_RAID_ATTRS is not set
+CONFIG_RAMFS=y
+# CONFIG_RAMOOPS is not set
+# CONFIG_RAR_REGISTER is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RDC_17F3101X is not set
+# CONFIG_RD_GZIP is not set
+CONFIG_RD_LZMA=y
+# CONFIG_RD_LZO is not set
+# CONFIG_RDS is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_RELAY is not set
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_RFKILL_INPUT is not set
+# CONFIG_RFKILL is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_ROSE is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_RT2860 is not set
+# CONFIG_RT2870 is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_RT3070 is not set
+# CONFIG_RT3090 is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_RTC_DEBUG is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+# CONFIG_RTC_DRV_PCF50606 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_RTC7301 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+CONFIG_RTC_HCTOSYS=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_RTL8187SE is not set
+# CONFIG_RTL8192E is not set
+# CONFIG_RTL8192U is not set
+# CONFIG_RTL8192SU is not set
+# CONFIG_RTL8306_PHY is not set
+# CONFIG_RTL8366_SMI is not set
+# CONFIG_RTL8366S_PHY_DEBUG_FS is not set
+# CONFIG_RTL8366S_PHY is not set
+# CONFIG_RTL8366RB_PHY is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_RUNTIME_DEBUG is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_S2IO is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_SATA_PMP is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SBC_FITPC2_WATCHDOG is not set
+# CONFIG_SC92031 is not set
+# CONFIG_SCC is not set
+# CONFIG_SCHED_BFS is not set
+CONFIG_SCHED_CFS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
+# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_SCSI_BFA_FC is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_ESP_CORE is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_HPSA is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_MPT2SAS is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PM8001 is not set
+# CONFIG_SCSI_PMCRAID is not set
+CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+# CONFIG_SCSI_SEAGATE is not set
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_ULTRASTOR is not set
+CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SECCOMP is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADT7411 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_AMC6821 is not set
+# CONFIG_SENSORS_APPLESMC is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ASC7621 is not set
+# CONFIG_SENSORS_ATK0110 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_CORETEMP is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCHMD is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_HDAPS is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_K8TEMP is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_UARTLITE is not set
+# CONFIG_SERIO is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SFI is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_SHAPER is not set
+CONFIG_SHMEM=y
+CONFIG_SIGNALFD=y
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2_DEBUG is not set
+# CONFIG_SKY2 is not set
+CONFIG_SLABINFO=y
+CONFIG_SLAB=y
+# CONFIG_SLHC is not set
+# CONFIG_SLICOSS is not set
+# CONFIG_SLIP is not set
+# CONFIG_SLOB is not set
+# CONFIG_SLOW_WORK_DEBUG is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_SLUB is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_SMARTJOYPLUS_FF is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMC91X is not set
+# CONFIG_SMP is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_SMSC9420 is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+# CONFIG_SND_AD1816A is not set
+# CONFIG_SND_AD1848 is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ADLIB is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ALS100 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT2320 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMI8330 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_CS4231 is not set
+# CONFIG_SND_CS4232 is not set
+# CONFIG_SND_CS4236 is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
+# CONFIG_SND_CTXFI is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DT019X is not set
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1688 is not set
+# CONFIG_SND_ES18XX is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_ES968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_GUSCLASSIC is not set
+# CONFIG_SND_GUSEXTREME is not set
+# CONFIG_SND_GUSMAX is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_HWDEP is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGODJX is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_INTERWAVE is not set
+# CONFIG_SND_INTERWAVE_STB is not set
+# CONFIG_SND_ISA is not set
+# CONFIG_SND is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_LX6464ES is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_MIPS is not set
+# CONFIG_SND_MIRO is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_OPL3SA2 is not set
+# CONFIG_SND_OPTI92X_AD1848 is not set
+# CONFIG_SND_OPTI92X_CS4231 is not set
+# CONFIG_SND_OPTI93X is not set
+CONFIG_SND_OSSEMUL=y
+# CONFIG_SND_OXYGEN is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_PCMCIA is not set
+# CONFIG_SND_PCM is not set
+# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_PDAUDIOCF is not set
+# CONFIG_SND_RAWMIDI is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RTCTIMER is not set
+# CONFIG_SND_SB16 is not set
+# CONFIG_SND_SB8 is not set
+# CONFIG_SND_SBAWE is not set
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_SIS7019 is not set
+# CONFIG_SND_SGALAXY is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_SSCAPE is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_TIMER is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_UA101 is not set
+# CONFIG_SND_USB_US122L is not set
+# CONFIG_SND_USB_USX2Y is not set
+CONFIG_SND_USB=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_WAVEFRONT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_SONYPI is not set
+# CONFIG_SONY_LAPTOP is not set
+# CONFIG_SOUND is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_DEBUG is not set
+# CONFIG_SPI_DESIGNWARE is not set
+# CONFIG_SPI_GPIO_OLD is not set
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_SPI_ORION is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPINLOCK_TEST is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_SQUASHFS_LZMA=y
+CONFIG_SQUASHFS_SUPPORT_ZLIB=y
+# CONFIG_SQUASHFS_VMALLOC is not set
+# CONFIG_SQUASHFS_XATTRS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SSB_DEBUG is not set
+# CONFIG_SSB is not set
+# CONFIG_SSB_PCMCIAHOST is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB_SDIOHOST is not set
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSFDC is not set
+# CONFIG_STACK_TRACER is not set
+CONFIG_STACKTRACE_SUPPORT=y
+# CONFIG_STAGING_EXCLUDE_BUILD is not set
+CONFIG_STAGING=y
+CONFIG_STANDALONE=y
+CONFIG_STDBINUTILS=y
+# CONFIG_STE10XP is not set
+CONFIG_STP=y
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_STRIP is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_GSS is not set
+# CONFIG_SUNRPC is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SWAP=y
+# CONFIG_SWCONFIG is not set
+# CONFIG_SYNCLINK_CS is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL=y
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_SYSFS=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_SYSV_FS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_SYSVIPC=y
+# CONFIG_TPS6507X is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_TCIC is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_CUBIC is not set
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_VENO is not set
+CONFIG_TCP_CONG_WESTWOOD=y
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_TEXTSEARCH_BM is not set
+# CONFIG_TEXTSEARCH_FSM is not set
+# CONFIG_TEXTSEARCH_KMP is not set
+CONFIG_TEXTSEARCH=y
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_TIFM_CORE is not set
+# CONFIG_TIGON3 is not set
+CONFIG_TIMERFD=y
+# CONFIG_TINY_SHMEM is not set
+# CONFIG_TIPC is not set
+# CONFIG_TLAN is not set
+# CONFIG_TMD_HERMES is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_TMPFS=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_FILTER is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_S3C2410 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_TRANZPORT is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_TR is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_TUNER_TEA5761 is not set
+# CONFIG_TUN is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_UDF_FS is not set
+CONFIG_UDF_NLS=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_UFS_FS is not set
+# CONFIG_UIO is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_UNEVICTABLE_LRU is not set
+# CONFIG_UNION_MOUNT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+CONFIG_UNIX=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AIPTEK is not set
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_APPLETOUCH is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATMEL is not set
+# CONFIG_USB_ATM is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_BELKIN=y
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_CPC is not set
+# CONFIG_USB_CXACRU is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_DABUSB is not set
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_ET61X251 is not set
+CONFIG_USB_EZUSB=y
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_G_MULTI is not set
+# CONFIG_USB_G_NOKIA is not set
+# CONFIG_USB_GL860 is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_GSPCA_BENQ is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_CPIA1 is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA is not set
+# CONFIG_USB_GSPCA_JEILINJ is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_OV534_9 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7302 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+CONFIG_USB_GSPCA_SN9C20X_EVDEV=y
+# CONFIG_USB_GSPCA_SN9C2028 is not set
+# CONFIG_USB_GSPCA_SN9C20X is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_STV0680 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_USB_HIDDEV is not set
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HID is not set
+# CONFIG_USB_HSO is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_IP_COMMON is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_KC2190 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LIBUSUAL is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_NET_AX8817X is not set
+# CONFIG_USB_NET_CDC_EEM is not set
+# CONFIG_USB_NET_CDCETHER is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_SMSC75XX is not set
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_OHCI_HCD_PCI is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OHCI_HCD_PPC_SOC is not set
+# CONFIG_USB_OHCI_HCD_SSB is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_PWC_INPUT_EVDEV is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_QCAUX is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_QUATECH2 is not set
+# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_SIERRA_NET is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_SPEEDTOUCH is not set
+# CONFIG_USB_STKWEBCAM is not set
+CONFIG_USB_STORAGE_ALAUDA=y
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_FREECOM=y
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE is not set
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_KARMA=y
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+# CONFIG_USB_STORAGE_SIERRA is not set
+CONFIG_USB_STORAGE_USBAT=y
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_TMC is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_UEAGLEATM is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_VICAM is not set
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+# CONFIG_USB_VIDEO_CLASS is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_W9968CF is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_WUSB_CBAF is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_XHCI_HCD is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_XUSBATM is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_UWB is not set
+# CONFIG_VETH is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_VGA_ARB is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT848 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_CAFE_CCIC is not set
+# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_CX231XX is not set
+# CONFIG_VIDEO_CX2341X is not set
+# CONFIG_VIDEO_CX25840 is not set
+# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_DPC is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_GO7007 is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_IR_I2C is not set
+# CONFIG_VIDEO_IVTV is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_MEDIA is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_MXB is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_VIDEO_PMS is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_SAA6588 is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA7111 is not set
+# CONFIG_VIDEO_SAA7114 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7134 is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_TVP7002 is not set
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_USBVISION is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_VIDEO_V4L1 is not set
+# CONFIG_VIDEO_V4L2_COMMON is not set
+# CONFIG_VIDEO_V4L2 is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+# CONFIG_VIDEO_VPX3220 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_ZORAN is not set
+# CONFIG_VIRQ_DEBUG is not set
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_VIRTUALIZATION is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_VLAN_8021Q_GVRP is not set
+CONFIG_VLAN_8021Q=y
+# CONFIG_VME_BUS is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_VMSPLIT_1G is not set
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_2G_OPT is not set
+# CONFIG_VMSPLIT_3G_OPT is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMXNET3 is not set
+# CONFIG_VT6655 is not set
+# CONFIG_VT6656 is not set
+# CONFIG_VT is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_W1_CON is not set
+# CONFIG_W1 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS2490 is not set
+# CONFIG_W1_MASTER_GPIO is not set
+# CONFIG_W1_MASTER_MATROX is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W83627HF_WDT is not set
+# CONFIG_W83697HF_WDT is not set
+# CONFIG_W83877F_WDT is not set
+# CONFIG_W83977F_WDT is not set
+# CONFIG_WAN is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_WANXL is not set
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WDTPCI is not set
+# CONFIG_WIMAX is not set
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS=y
+CONFIG_WLAN_80211=y
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN=y
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_WR_PPMC is not set
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_PRIV=y
+CONFIG_WEXT_SPY=y
+# CONFIG_X25 is not set
+# CONFIG_XFRM_IPCOMP is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_USER is not set
+CONFIG_XFRM=y
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XILINX_EMACLITE is not set
+# CONFIG_XILINX_LL_TEMAC is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_YAM is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_YENTA is not set
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+# CONFIG_YENTA_TI is not set
+# CONFIG_YENTA_TOSHIBA is not set
+# CONFIG_ZD1211RW_DEBUG is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_ZISOFS_FS is not set
+CONFIG_ZISOFS=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ZONE_DMA=y
+CONFIG_DEFAULT_SECURITY_DAC=y
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_NETFILTER_XT_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
diff --git a/target/linux/generic/files-2.6.25/drivers/char/gpio_dev.c b/target/linux/generic/files-2.6.25/drivers/char/gpio_dev.c
new file mode 100644
index 0000000000..4dc637471c
--- /dev/null
+++ b/target/linux/generic/files-2.6.25/drivers/char/gpio_dev.c
@@ -0,0 +1,201 @@
+/*
+ * character device wrapper for generic gpio layer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA02111-1307USA
+ *
+ * Feedback, Bugs...  blogic@openwrt.org
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/atomic.h>
+#include <linux/init.h>
+#include <linux/genhd.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_dev.h>
+
+#define DRVNAME		"gpiodev"
+#define DEVNAME		"gpio"
+
+static int dev_major;
+static unsigned int gpio_access_mask;
+static struct class *gpiodev_class;
+
+/* Counter is 1, if the device is not opened and zero (or less) if opened. */
+static atomic_t gpio_open_cnt = ATOMIC_INIT(1);
+
+static int
+gpio_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg)
+{
+	int retval = 0;
+
+	if (((1 << arg) & gpio_access_mask) != (1 << arg))
+	{
+		retval = -EINVAL;
+		goto out;
+	}
+
+	switch (cmd)
+	{
+	case GPIO_GET:
+		retval = gpio_get_value(arg);
+		break;
+
+	case GPIO_SET:
+		gpio_set_value(arg, 1);
+		break;
+
+	case GPIO_CLEAR:
+		gpio_set_value(arg, 0);
+		break;
+
+	case GPIO_DIR_IN:
+		gpio_direction_input(arg);
+		break;
+
+	case GPIO_DIR_OUT:
+		gpio_direction_output(arg, 0);
+		break;
+
+	default:
+		retval = -EINVAL;
+		break;
+	}
+
+out:
+	return retval;
+}
+
+static int
+gpio_open(struct inode *inode, struct file *file)
+{
+	int result = 0;
+	unsigned int dev_minor = MINOR(inode->i_rdev);
+
+	if (dev_minor != 0)
+	{
+		printk(KERN_ERR DRVNAME ": trying to access unknown minor device -> %d\n", dev_minor);
+		result = -ENODEV;
+		goto out;
+	}
+
+	/* FIXME: We should really allow multiple applications to open the device
+	 *        at the same time, as long as the apps access different IO pins.
+	 *        The generic gpio-registration functions can be used for that.
+	 *        Two new IOCTLs have to be introduced for that. Need to check userspace
+	 *        compatibility first. --mb */
+	if (!atomic_dec_and_test(&gpio_open_cnt)) {
+		atomic_inc(&gpio_open_cnt);
+		printk(KERN_ERR DRVNAME ": Device with minor ID %d already in use\n", dev_minor);
+		result = -EBUSY;
+		goto out;
+	}
+
+out:
+	return result;
+}
+
+static int
+gpio_close(struct inode * inode, struct file * file)
+{
+	smp_mb__before_atomic_inc();
+	atomic_inc(&gpio_open_cnt);
+
+	return 0;
+}
+
+struct file_operations gpio_fops = {
+	ioctl:		gpio_ioctl,
+	open:		gpio_open,
+	release:	gpio_close
+};
+
+static int
+gpio_probe(struct platform_device *dev)
+{
+	int result = 0;
+
+	dev_major = register_chrdev(0, DEVNAME, &gpio_fops);
+	if (!dev_major)
+	{
+		printk(KERN_ERR DRVNAME ": Error whilst opening %s \n", DEVNAME);
+		result = -ENODEV;
+		goto out;
+	}
+
+	gpiodev_class = class_create(THIS_MODULE, DRVNAME);
+	class_device_create(gpiodev_class, NULL, MKDEV(dev_major, 0), NULL, DEVNAME);
+
+	printk(KERN_INFO DRVNAME ": gpio device registered with major %d\n", dev_major);
+
+	if (dev->num_resources != 1)
+	{
+		printk(KERN_ERR DRVNAME ": device may only have 1 resource\n");
+		result = -ENODEV;
+		goto out;
+	}
+
+	gpio_access_mask = dev->resource[0].start;
+
+	printk(KERN_INFO DRVNAME ": gpio platform device registered with access mask %08X\n", gpio_access_mask);
+out:
+	return result;
+}
+
+static int
+gpio_remove(struct platform_device *dev)
+{
+	unregister_chrdev(dev_major, DEVNAME);
+	return 0;
+}
+
+static struct
+platform_driver gpio_driver = {
+	.probe = gpio_probe,
+	.remove = gpio_remove,
+	.driver = {
+		.name = "GPIODEV",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init
+gpio_mod_init(void)
+{
+	int ret = platform_driver_register(&gpio_driver);
+	if (ret)
+		printk(KERN_INFO DRVNAME ": Error registering platfom driver!");
+
+	return ret;
+}
+
+static void __exit
+gpio_mod_exit(void)
+{
+	platform_driver_unregister(&gpio_driver);
+}
+
+module_init (gpio_mod_init);
+module_exit (gpio_mod_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Crispin / OpenWrt");
+MODULE_DESCRIPTION("Character device for for generic gpio api");
diff --git a/target/linux/generic/files-2.6.25/drivers/input/misc/gpio_buttons.c b/target/linux/generic/files-2.6.25/drivers/input/misc/gpio_buttons.c
new file mode 100644
index 0000000000..83a8178340
--- /dev/null
+++ b/target/linux/generic/files-2.6.25/drivers/input/misc/gpio_buttons.c
@@ -0,0 +1,209 @@
+/*
+ *  Driver for buttons on GPIO lines not capable of generating interrupts
+ *
+ *  Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This file was based on: /drivers/input/misc/cobalt_btns.c
+ *	Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  also was based on: /drivers/input/keyboard/gpio_keys.c
+ *	Copyright 2005 Phil Blundell
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <linux/input.h>
+#include <linux/input-polldev.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
+#include <linux/gpio_buttons.h>
+
+#include <asm/gpio.h>
+
+#define DRV_NAME	"gpio-buttons"
+#define DRV_VERSION	"0.1.1"
+#define PFX		DRV_NAME ": "
+
+struct gpio_buttons_dev {
+	struct input_polled_dev *poll_dev;
+	struct gpio_buttons_platform_data *pdata;
+};
+
+static void gpio_buttons_poll(struct input_polled_dev *dev)
+{
+	struct gpio_buttons_dev *bdev = dev->private;
+	struct gpio_buttons_platform_data *pdata = bdev->pdata;
+	struct input_dev *input = dev->input;
+	int i;
+
+	for (i = 0; i < bdev->pdata->nbuttons; i++) {
+		struct gpio_button *button = &pdata->buttons[i];
+		unsigned int type = button->type ?: EV_KEY;
+		int state;
+
+		state = gpio_get_value(button->gpio) ? 1 : 0;
+		state ^= button->active_low;
+
+		if (state) {
+			button->count++;
+		} else {
+			if (button->count >= button->threshold) {
+				input_event(input, type, button->code, 1);
+				input_sync(input);
+			}
+			button->count = 0;
+		}
+
+		if (button->count == button->threshold) {
+			input_event(input, type, button->code, 0);
+			input_sync(input);
+		}
+	}
+}
+
+static int __devinit gpio_buttons_probe(struct platform_device *pdev)
+{
+	struct gpio_buttons_platform_data *pdata = pdev->dev.platform_data;
+	struct gpio_buttons_dev *bdev;
+	struct input_polled_dev *poll_dev;
+	struct input_dev *input;
+	int error, i;
+
+
+	if (!pdata)
+		return -ENXIO;
+
+	bdev = kzalloc(sizeof(*bdev), GFP_KERNEL);
+	if (!bdev) {
+		printk(KERN_ERR DRV_NAME "no memory for device\n");
+		return -ENOMEM;
+	}
+
+	poll_dev = input_allocate_polled_device();
+	if (!poll_dev) {
+		printk(KERN_ERR DRV_NAME "no memory for polled device\n");
+		error = -ENOMEM;
+		goto err_free_bdev;
+	}
+
+	poll_dev->private = bdev;
+	poll_dev->poll = gpio_buttons_poll;
+	poll_dev->poll_interval = pdata->poll_interval;
+
+	input = poll_dev->input;
+
+	input->evbit[0] = BIT(EV_KEY);
+	input->name = pdev->name;
+	input->phys = "gpio-buttons/input0";
+	input->dev.parent = &pdev->dev;
+
+	input->id.bustype = BUS_HOST;
+	input->id.vendor = 0x0001;
+	input->id.product = 0x0001;
+	input->id.version = 0x0100;
+
+	for (i = 0; i < pdata->nbuttons; i++) {
+		struct gpio_button *button = &pdata->buttons[i];
+		unsigned int gpio = button->gpio;
+		unsigned int type = button->type ?: EV_KEY;
+
+		error = gpio_request(gpio, button->desc ?
+				button->desc : DRV_NAME);
+		if (error) {
+			printk(KERN_ERR PFX "unable to claim gpio %u, "
+				"error %d\n", gpio, error);
+			goto err_free_gpio;
+		}
+
+		error = gpio_direction_input(gpio);
+		if (error) {
+			printk(KERN_ERR PFX "unable to set direction on "
+				"gpio %u, error %d\n", gpio, error);
+			goto err_free_gpio;
+		}
+
+		input_set_capability(input, type, button->code);
+		button->count = 0;
+	}
+
+	bdev->poll_dev = poll_dev;
+	bdev->pdata = pdata;
+	platform_set_drvdata(pdev, bdev);
+
+	error = input_register_polled_device(poll_dev);
+	if (error) {
+		printk(KERN_ERR PFX "unable to register polled device, "
+			"error %d\n", error);
+		goto err_free_gpio;
+	}
+
+	return 0;
+
+err_free_gpio:
+	for (i = i - 1; i >= 0; i--)
+		gpio_free(pdata->buttons[i].gpio);
+
+	input_free_polled_device(poll_dev);
+
+err_free_bdev:
+	kfree(bdev);
+
+	platform_set_drvdata(pdev, NULL);
+	return error;
+}
+
+static int __devexit gpio_buttons_remove(struct platform_device *pdev)
+{
+	struct gpio_buttons_dev *bdev = platform_get_drvdata(pdev);
+	struct gpio_buttons_platform_data *pdata = bdev->pdata;
+	int i;
+
+	input_unregister_polled_device(bdev->poll_dev);
+
+	for (i = 0; i < pdata->nbuttons; i++)
+		gpio_free(pdata->buttons[i].gpio);
+
+	input_free_polled_device(bdev->poll_dev);
+
+	kfree(bdev);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver gpio_buttons_driver = {
+	.probe	= gpio_buttons_probe,
+	.remove	= __devexit_p(gpio_buttons_remove),
+	.driver	= {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init gpio_buttons_init(void)
+{
+	printk(KERN_INFO DRV_NAME " driver version " DRV_VERSION "\n");
+	return platform_driver_register(&gpio_buttons_driver);
+}
+
+static void __exit gpio_buttons_exit(void)
+{
+	platform_driver_unregister(&gpio_buttons_driver);
+}
+
+module_init(gpio_buttons_init);
+module_exit(gpio_buttons_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
+MODULE_VERSION(DRV_VERSION);
+MODULE_DESCRIPTION("Polled buttons driver for CPU GPIOs");
+
diff --git a/target/linux/generic/files-2.6.25/drivers/leds/ledtrig-default-on.c b/target/linux/generic/files-2.6.25/drivers/leds/ledtrig-default-on.c
new file mode 100644
index 0000000000..92995e40cf
--- /dev/null
+++ b/target/linux/generic/files-2.6.25/drivers/leds/ledtrig-default-on.c
@@ -0,0 +1,45 @@
+/*
+ * LED Kernel Default ON Trigger
+ *
+ * Copyright 2008 Nick Forbes <nick.forbes@incepta.com>
+ *
+ * Based on Richard Purdie's ledtrig-timer.c.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+#include "leds.h"
+
+static void defon_trig_activate(struct led_classdev *led_cdev)
+{
+	led_set_brightness(led_cdev, LED_FULL);
+}
+
+static struct led_trigger defon_led_trigger = {
+	.name     = "default-on",
+	.activate = defon_trig_activate,
+};
+
+static int __init defon_trig_init(void)
+{
+	return led_trigger_register(&defon_led_trigger);
+}
+
+static void __exit defon_trig_exit(void)
+{
+	led_trigger_unregister(&defon_led_trigger);
+}
+
+module_init(defon_trig_init);
+module_exit(defon_trig_exit);
+
+MODULE_AUTHOR("Nick Forbes <nick.forbes@incepta.com>");
+MODULE_DESCRIPTION("Default-ON LED trigger");
+MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/files-2.6.25/drivers/leds/ledtrig-morse.c b/target/linux/generic/files-2.6.25/drivers/leds/ledtrig-morse.c
new file mode 100644
index 0000000000..cb47480a36
--- /dev/null
+++ b/target/linux/generic/files-2.6.25/drivers/leds/ledtrig-morse.c
@@ -0,0 +1,365 @@
+/*
+ *  LED Morse Trigger
+ *
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This file was based on: drivers/led/ledtrig-timer.c
+ *	Copyright 2005-2006 Openedhand Ltd.
+ *	Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ *  also based on the patch '[PATCH] 2.5.59 morse code panics' posted
+ *  in the LKML by Tomas Szepe at Thu, 30 Jan 2003
+ *	Copyright (C) 2002 Andrew Rodland <arodland@noln.com>
+ *	Copyright (C) 2003 Tomas Szepe <szepe@pinerecords.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+#include <linux/timer.h>
+#include <linux/ctype.h>
+#include <linux/leds.h>
+
+#include "leds.h"
+
+#define MORSE_DELAY_BASE	(HZ/2)
+
+#define MORSE_STATE_BLINK_START	0
+#define MORSE_STATE_BLINK_STOP	1
+
+#define MORSE_DIT_LEN	1
+#define MORSE_DAH_LEN	3
+#define MORSE_SPACE_LEN	7
+
+struct morse_trig_data {
+	unsigned long delay;
+	char *msg;
+
+	unsigned char morse;
+	unsigned char state;
+	char *msgpos;
+	struct timer_list timer;
+};
+
+const unsigned char morsetable[] = {
+	0122, 0, 0310, 0, 0, 0163,				/* "#$%&' */
+	055, 0155, 0, 0, 0163, 0141, 0152, 0051, 		/* ()*+,-./ */
+	077, 076, 074, 070, 060, 040, 041, 043, 047, 057,	/* 0-9 */
+	0107, 0125, 0, 0061, 0, 0114, 0, 			/* :;<=>?@ */
+	006, 021, 025, 011, 002, 024, 013, 020, 004,		/* A-I */
+	036, 015, 022, 007, 005, 017, 026, 033, 012,		/* J-R */
+	010, 003, 014, 030, 016, 031, 035, 023,			/* S-Z */
+	0, 0, 0, 0, 0154					/* [\]^_ */
+};
+
+static inline unsigned char tomorse(char c) {
+	if (c >= 'a' && c <= 'z')
+		c = c - 'a' + 'A';
+	if (c >= '"' && c <= '_') {
+		return morsetable[c - '"'];
+	} else
+		return 0;
+}
+
+static inline unsigned long dit_len(struct morse_trig_data *morse_data)
+{
+	return MORSE_DIT_LEN*morse_data->delay;
+}
+
+static inline unsigned long dah_len(struct morse_trig_data *morse_data)
+{
+	return MORSE_DAH_LEN*morse_data->delay;
+}
+
+static inline unsigned long space_len(struct morse_trig_data *morse_data)
+{
+	return MORSE_SPACE_LEN*morse_data->delay;
+}
+
+static void morse_timer_function(unsigned long data)
+{
+	struct led_classdev *led_cdev = (struct led_classdev *)data;
+	struct morse_trig_data *morse_data = led_cdev->trigger_data;
+	unsigned long brightness = LED_OFF;
+	unsigned long delay = 0;
+
+	if (!morse_data->msg)
+		goto set_led;
+
+	switch (morse_data->state) {
+	case MORSE_STATE_BLINK_START:
+		/* Starting a new blink.  We have a valid code in morse. */
+		delay = (morse_data->morse & 001) ? dah_len(morse_data):
+			dit_len(morse_data);
+		brightness = LED_FULL;
+		morse_data->state = MORSE_STATE_BLINK_STOP;
+		morse_data->morse >>= 1;
+		break;
+	case MORSE_STATE_BLINK_STOP:
+		/* Coming off of a blink. */
+		morse_data->state = MORSE_STATE_BLINK_START;
+
+		if (morse_data->morse > 1) {
+			/* Not done yet, just a one-dit pause. */
+			delay = dit_len(morse_data);
+			break;
+		}
+
+		/* Get a new char, figure out how much space. */
+		/* First time through */
+		if (!morse_data->msgpos)
+			morse_data->msgpos = (char *)morse_data->msg;
+
+		if (!*morse_data->msgpos) {
+			/* Repeating */
+			morse_data->msgpos = (char *)morse_data->msg;
+			delay = space_len(morse_data);
+		} else {
+			/* Inter-letter space */
+			delay = dah_len(morse_data);
+		}
+
+		if (!(morse_data->morse = tomorse(*morse_data->msgpos))) {
+			delay = space_len(morse_data);
+			/* And get us back here */
+			morse_data->state = MORSE_STATE_BLINK_STOP;
+		}
+		morse_data->msgpos++;
+		break;
+	}
+
+	mod_timer(&morse_data->timer, jiffies + msecs_to_jiffies(delay));
+
+set_led:
+	led_set_brightness(led_cdev, brightness);
+}
+
+static ssize_t _morse_delay_show(struct led_classdev *led_cdev, char *buf)
+{
+	struct morse_trig_data *morse_data = led_cdev->trigger_data;
+
+	sprintf(buf, "%lu\n", morse_data->delay);
+
+	return strlen(buf) + 1;
+}
+
+static ssize_t _morse_delay_store(struct led_classdev *led_cdev,
+		const char *buf, size_t size)
+{
+	struct morse_trig_data *morse_data = led_cdev->trigger_data;
+	char *after;
+	unsigned long state = simple_strtoul(buf, &after, 10);
+	size_t count = after - buf;
+	int ret = -EINVAL;
+
+	if (*after && isspace(*after))
+		count++;
+
+	if (count == size) {
+		morse_data->delay = state;
+		mod_timer(&morse_data->timer, jiffies + 1);
+		ret = count;
+	}
+
+	return ret;
+}
+
+static ssize_t _morse_msg_show(struct led_classdev *led_cdev, char *buf)
+{
+	struct morse_trig_data *morse_data = led_cdev->trigger_data;
+
+	if (!morse_data->msg)
+		sprintf(buf, "<none>\n");
+	else
+		sprintf(buf, "%s\n", morse_data->msg);
+
+	return strlen(buf) + 1;
+}
+
+static ssize_t _morse_msg_store(struct led_classdev *led_cdev,
+		const char *buf, size_t size)
+{
+	struct morse_trig_data *morse_data = led_cdev->trigger_data;
+	char *m;
+
+	m = kmalloc(size, GFP_KERNEL);
+	if (!m)
+		return -ENOMEM;
+
+	memcpy(m,buf,size);
+	m[size]='\0';
+
+	if (morse_data->msg)
+		kfree(morse_data->msg);
+
+	morse_data->msg = m;
+	morse_data->msgpos = NULL;
+	morse_data->state = MORSE_STATE_BLINK_STOP;
+
+	mod_timer(&morse_data->timer, jiffies + 1);
+
+	return size;
+}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23)
+static ssize_t morse_delay_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+	return _morse_delay_show(led_cdev, buf);
+}
+
+static ssize_t morse_delay_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+	return _morse_delay_store(led_cdev, buf, size);
+}
+
+static ssize_t morse_msg_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+	return _morse_msg_show(led_cdev, buf);
+}
+
+static ssize_t morse_msg_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+	return _morse_msg_store(led_cdev, buf, size);
+}
+
+static DEVICE_ATTR(delay, 0644, morse_delay_show, morse_delay_store);
+static DEVICE_ATTR(message, 0644, morse_msg_show, morse_msg_store);
+
+#define led_device_create_file(leddev, attr) \
+	device_create_file(leddev->dev, &dev_attr_ ## attr)
+#define led_device_remove_file(leddev, attr) \
+	device_remove_file(leddev->dev, &dev_attr_ ## attr)
+
+#else
+static ssize_t morse_delay_show(struct class_device *dev, char *buf)
+{
+	struct led_classdev *led_cdev = class_get_devdata(dev);
+
+	return _morse_delay_show(led_cdev, buf);
+}
+
+static ssize_t morse_delay_store(struct class_device *dev, const char *buf,
+		size_t size)
+{
+	struct led_classdev *led_cdev = class_get_devdata(dev);
+
+	return _morse_delay_store(led_cdev, buf, size);
+}
+
+static ssize_t morse_msg_show(struct class_device *dev, char *buf)
+{
+	struct led_classdev *led_cdev = class_get_devdata(dev);
+
+	return _morse_msg_show(led_cdev, buf);
+}
+
+static ssize_t morse_msg_store(struct class_device *dev, const char *buf,
+				size_t size)
+{
+	struct led_classdev *led_cdev = class_get_devdata(dev);
+
+	return _morse_msg_store(led_cdev, buf, size);
+}
+
+static CLASS_DEVICE_ATTR(delay, 0644, morse_delay_show, morse_delay_store);
+static CLASS_DEVICE_ATTR(message, 0644, morse_msg_show, morse_msg_store);
+
+#define led_device_create_file(leddev, attr) \
+	class_device_create_file(leddev->class_dev, &class_device_attr_ ## attr)
+#define led_device_remove_file(leddev, attr) \
+	class_device_remove_file(leddev->class_dev, &class_device_attr_ ## attr)
+
+#endif
+
+static void morse_trig_activate(struct led_classdev *led_cdev)
+{
+	struct morse_trig_data *morse_data;
+	int rc;
+
+	morse_data = kzalloc(sizeof(*morse_data), GFP_KERNEL);
+	if (!morse_data)
+		return;
+
+	morse_data->delay = MORSE_DELAY_BASE;
+	init_timer(&morse_data->timer);
+	morse_data->timer.function = morse_timer_function;
+	morse_data->timer.data = (unsigned long)led_cdev;
+
+	rc = led_device_create_file(led_cdev, delay);
+	if (rc) goto err;
+
+	rc = led_device_create_file(led_cdev, message);
+	if (rc) goto err_delay;
+
+	led_cdev->trigger_data = morse_data;
+
+	return;
+
+err_delay:
+	led_device_remove_file(led_cdev, delay);
+err:
+	kfree(morse_data);
+}
+
+static void morse_trig_deactivate(struct led_classdev *led_cdev)
+{
+	struct morse_trig_data *morse_data = led_cdev->trigger_data;
+
+	if (!morse_data)
+		return;
+
+	led_device_remove_file(led_cdev, message);
+	led_device_remove_file(led_cdev, delay);
+
+	del_timer_sync(&morse_data->timer);
+	if (morse_data->msg)
+		kfree(morse_data->msg);
+
+	kfree(morse_data);
+}
+
+static struct led_trigger morse_led_trigger = {
+	.name		= "morse",
+	.activate	= morse_trig_activate,
+	.deactivate	= morse_trig_deactivate,
+};
+
+static int __init morse_trig_init(void)
+{
+	return led_trigger_register(&morse_led_trigger);
+}
+
+static void __exit morse_trig_exit(void)
+{
+	led_trigger_unregister(&morse_led_trigger);
+}
+
+module_init(morse_trig_init);
+module_exit(morse_trig_exit);
+
+MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
+MODULE_DESCRIPTION("Morse LED trigger");
+MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/files-2.6.25/drivers/leds/ledtrig-netdev.c b/target/linux/generic/files-2.6.25/drivers/leds/ledtrig-netdev.c
new file mode 100644
index 0000000000..285d0f795c
--- /dev/null
+++ b/target/linux/generic/files-2.6.25/drivers/leds/ledtrig-netdev.c
@@ -0,0 +1,437 @@
+/*
+ * LED Kernel Netdev Trigger
+ *
+ * Toggles the LED to reflect the link and traffic state of a named net device
+ *
+ * Copyright 2007 Oliver Jowett <oliver@opencloud.com>
+ *
+ * Derived from ledtrig-timer.c which is:
+ *  Copyright 2005-2006 Openedhand Ltd.
+ *  Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+#include <linux/netdevice.h>
+#include <linux/timer.h>
+#include <linux/ctype.h>
+#include <linux/leds.h>
+#include "leds.h"
+
+/*
+ * Configurable sysfs attributes:
+ *
+ * device_name - network device name to monitor
+ *
+ * interval - duration of LED blink, in milliseconds
+ *
+ * mode - either "none" (LED is off) or a space separated list of one or more of:
+ *   link: LED's normal state reflects whether the link is up (has carrier) or not
+ *   tx:   LED blinks on transmitted data
+ *   rx:   LED blinks on receive data
+ * 
+ * Some suggestions:
+ *
+ *  Simple link status LED:
+ *  $ echo netdev >someled/trigger
+ *  $ echo eth0 >someled/device_name
+ *  $ echo link >someled/mode
+ *
+ *  Ethernet-style link/activity LED:
+ *  $ echo netdev >someled/trigger
+ *  $ echo eth0 >someled/device_name
+ *  $ echo "link tx rx" >someled/mode
+ *
+ *  Modem-style tx/rx LEDs:
+ *  $ echo netdev >led1/trigger
+ *  $ echo ppp0 >led1/device_name
+ *  $ echo tx >led1/mode
+ *  $ echo netdev >led2/trigger
+ *  $ echo ppp0 >led2/device_name
+ *  $ echo rx >led2/mode
+ *
+ */
+
+#define MODE_LINK 1
+#define MODE_TX   2
+#define MODE_RX   4
+
+struct led_netdev_data {
+	rwlock_t lock;
+	
+	struct timer_list timer;
+	struct notifier_block notifier;	
+	
+	struct led_classdev *led_cdev;
+	struct net_device *net_dev;
+	
+	char device_name[IFNAMSIZ];
+	unsigned interval;
+	unsigned mode;
+	unsigned link_up;
+	unsigned last_activity;
+};
+
+static void set_baseline_state(struct led_netdev_data *trigger_data)
+{  
+	if ((trigger_data->mode & MODE_LINK) != 0 && trigger_data->link_up)
+		led_set_brightness(trigger_data->led_cdev, LED_FULL);
+	else
+		led_set_brightness(trigger_data->led_cdev, LED_OFF);
+	
+	if ((trigger_data->mode & (MODE_TX | MODE_RX)) != 0 && trigger_data->link_up)
+		mod_timer(&trigger_data->timer, jiffies + trigger_data->interval);
+	else
+		del_timer(&trigger_data->timer);    
+}  
+
+static ssize_t led_device_name_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct led_netdev_data *trigger_data = led_cdev->trigger_data;
+	
+	read_lock(&trigger_data->lock);
+	sprintf(buf, "%s\n", trigger_data->device_name);
+	read_unlock(&trigger_data->lock);
+	
+	return strlen(buf) + 1;
+}
+  
+static ssize_t led_device_name_store(struct device *dev, 
+				     struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct led_netdev_data *trigger_data = led_cdev->trigger_data;
+	
+	if (size < 0 || size >= IFNAMSIZ)
+		return -EINVAL;
+	
+	write_lock(&trigger_data->lock);
+
+	strcpy(trigger_data->device_name, buf);
+	if (size > 0 && trigger_data->device_name[size-1] == '\n')
+		trigger_data->device_name[size-1] = 0;
+	
+	if (trigger_data->device_name[0] != 0) {
+		/* check for existing device to update from */
+		trigger_data->net_dev = dev_get_by_name(trigger_data->device_name);
+		if (trigger_data->net_dev != NULL)
+			trigger_data->link_up = (dev_get_flags(trigger_data->net_dev) & IFF_LOWER_UP) != 0;
+		set_baseline_state(trigger_data); /* updates LEDs, may start timers */
+	}
+	
+	write_unlock(&trigger_data->lock);	
+	return size;
+}
+
+static DEVICE_ATTR(device_name, 0644, led_device_name_show, led_device_name_store);
+
+static ssize_t led_mode_show(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct led_netdev_data *trigger_data = led_cdev->trigger_data;
+	
+	read_lock(&trigger_data->lock);
+	
+	if (trigger_data->mode == 0) {
+		strcpy(buf, "none\n");
+	} else {
+		if (trigger_data->mode & MODE_LINK) 
+			strcat(buf, "link ");
+		if (trigger_data->mode & MODE_TX)
+			strcat(buf, "tx ");
+		if (trigger_data->mode & MODE_RX)
+			strcat(buf, "rx ");
+		strcat(buf, "\n");
+	}
+	
+	read_unlock(&trigger_data->lock);	
+
+	return strlen(buf)+1;
+}
+
+static ssize_t led_mode_store(struct device *dev, 
+			      struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct led_netdev_data *trigger_data = led_cdev->trigger_data;	
+	char copybuf[1024];
+	int new_mode = -1;
+	char *p, *token;
+
+	/* take a copy since we don't want to trash the inbound buffer when using strsep */
+	strncpy(copybuf, buf, sizeof(copybuf));
+	copybuf[1023] = 0;
+	p = copybuf;
+	
+	while ((token = strsep(&p, " \t\n")) != NULL) {
+		if (!*token)
+			continue;
+		
+		if (new_mode == -1)
+			new_mode = 0;
+		
+		if (!strcmp(token, "none"))
+			new_mode = 0;
+		else if (!strcmp(token, "tx"))
+			new_mode |= MODE_TX;
+		else if (!strcmp(token, "rx"))
+			new_mode |= MODE_RX;
+		else if (!strcmp(token, "link"))
+			new_mode |= MODE_LINK;
+		else
+			return -EINVAL;
+	}
+	
+	if (new_mode == -1)
+		return -EINVAL;
+	
+	write_lock(&trigger_data->lock);	
+	trigger_data->mode = new_mode;  
+	set_baseline_state(trigger_data);
+	write_unlock(&trigger_data->lock);
+	
+	return size;
+}
+
+static DEVICE_ATTR(mode, 0644, led_mode_show, led_mode_store);
+
+static ssize_t led_interval_show(struct device *dev, 
+				 struct device_attribute *attr, char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct led_netdev_data *trigger_data = led_cdev->trigger_data;
+	
+	read_lock(&trigger_data->lock);
+	sprintf(buf, "%u\n", jiffies_to_msecs(trigger_data->interval));
+	read_unlock(&trigger_data->lock);
+	
+	return strlen(buf) + 1;
+}
+
+static ssize_t led_interval_store(struct device *dev, 
+				  struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct led_netdev_data *trigger_data = led_cdev->trigger_data;
+	int ret = -EINVAL;
+	char *after;
+	unsigned long value = simple_strtoul(buf, &after, 10);
+	size_t count = after - buf;
+
+	if (*after && isspace(*after))
+		count++;
+
+	/* impose some basic bounds on the timer interval */
+	if (count == size && value >= 5 && value <= 10000) {
+		write_lock(&trigger_data->lock);
+		trigger_data->interval = msecs_to_jiffies(value);
+		set_baseline_state(trigger_data); // resets timer
+		write_unlock(&trigger_data->lock);
+		ret = count;
+	}
+	
+	return ret;
+}
+
+static DEVICE_ATTR(interval, 0644, led_interval_show, led_interval_store);
+
+static int netdev_trig_notify(struct notifier_block *nb,
+			      unsigned long evt,
+			      void *dv)
+{
+	struct net_device *dev = dv;
+	struct led_netdev_data *trigger_data = container_of(nb, struct led_netdev_data, notifier);
+	
+	if (evt != NETDEV_UP && evt != NETDEV_DOWN && evt != NETDEV_CHANGE && evt != NETDEV_REGISTER && evt != NETDEV_UNREGISTER)
+		return NOTIFY_DONE;
+	
+	write_lock(&trigger_data->lock);
+
+	if (strcmp(dev->name, trigger_data->device_name))
+		goto done;
+	
+	if (evt == NETDEV_REGISTER) {
+		if (trigger_data->net_dev != NULL)
+			dev_put(trigger_data->net_dev);
+		dev_hold(dev);
+		trigger_data->net_dev = dev;
+		trigger_data->link_up = 0;
+		goto done;
+	}
+	
+	if (evt == NETDEV_UNREGISTER && trigger_data->net_dev != NULL) {
+		dev_put(trigger_data->net_dev);
+		trigger_data->net_dev = NULL;
+		goto done;
+	}
+	
+	/* UP / DOWN / CHANGE */
+	
+	trigger_data->link_up = (evt != NETDEV_DOWN && netif_carrier_ok(dev));
+	set_baseline_state(trigger_data);
+
+done:
+	write_unlock(&trigger_data->lock);  
+	return NOTIFY_DONE;
+}
+
+/* here's the real work! */
+static void netdev_trig_timer(unsigned long arg)
+{
+	struct led_netdev_data *trigger_data = (struct led_netdev_data *)arg;
+	struct net_device_stats *dev_stats;
+	unsigned new_activity;
+	
+	write_lock(&trigger_data->lock);
+    
+	if (!trigger_data->link_up || !trigger_data->net_dev || (trigger_data->mode & (MODE_TX | MODE_RX)) == 0) {
+		/* we don't need to do timer work, just reflect link state. */
+		led_set_brightness(trigger_data->led_cdev, ((trigger_data->mode & MODE_LINK) != 0 && trigger_data->link_up) ? LED_FULL : LED_OFF);
+		goto no_restart;
+	}
+	
+	dev_stats = trigger_data->net_dev->get_stats(trigger_data->net_dev);
+	new_activity =
+		((trigger_data->mode & MODE_TX) ? dev_stats->tx_packets : 0) +
+		((trigger_data->mode & MODE_RX) ? dev_stats->rx_packets : 0);
+      
+	if (trigger_data->mode & MODE_LINK) {
+		/* base state is ON (link present) */
+		/* if there's no link, we don't get this far and the LED is off */
+		
+		/* OFF -> ON always */
+		/* ON -> OFF on activity */
+		if (trigger_data->led_cdev->brightness == LED_OFF) {
+			led_set_brightness(trigger_data->led_cdev, LED_FULL);
+		} else if (trigger_data->last_activity != new_activity) {
+			led_set_brightness(trigger_data->led_cdev, LED_OFF);
+		}
+	} else {
+		/* base state is OFF */
+		/* ON -> OFF always */
+		/* OFF -> ON on activity */
+		if (trigger_data->led_cdev->brightness == LED_FULL) {
+			led_set_brightness(trigger_data->led_cdev, LED_OFF);
+		} else if (trigger_data->last_activity != new_activity) {
+			led_set_brightness(trigger_data->led_cdev, LED_FULL);
+		}
+	}
+	
+	trigger_data->last_activity = new_activity;
+	mod_timer(&trigger_data->timer, jiffies + trigger_data->interval);
+
+no_restart:
+	write_unlock(&trigger_data->lock);
+}
+
+static void netdev_trig_activate(struct led_classdev *led_cdev)
+{
+	struct led_netdev_data *trigger_data;
+	int rc;
+
+	trigger_data = kzalloc(sizeof(struct led_netdev_data), GFP_KERNEL);
+	if (!trigger_data)
+		return;
+
+	rwlock_init(&trigger_data->lock);
+
+	trigger_data->notifier.notifier_call = netdev_trig_notify;
+	trigger_data->notifier.priority = 10;
+
+	setup_timer(&trigger_data->timer, netdev_trig_timer, (unsigned long) trigger_data);
+
+	trigger_data->led_cdev = led_cdev;
+	trigger_data->net_dev = NULL;
+	trigger_data->device_name[0] = 0;
+	
+	trigger_data->mode = 0;
+	trigger_data->interval = msecs_to_jiffies(50);
+	trigger_data->link_up = 0;
+	trigger_data->last_activity = 0;
+	
+	led_cdev->trigger_data = trigger_data;
+
+	rc = device_create_file(led_cdev->dev, &dev_attr_device_name);
+	if (rc)
+		goto err_out;
+	rc = device_create_file(led_cdev->dev, &dev_attr_mode);
+	if (rc)
+		goto err_out_device_name;
+	rc = device_create_file(led_cdev->dev, &dev_attr_interval);
+	if (rc)
+		goto err_out_mode;
+
+	register_netdevice_notifier(&trigger_data->notifier);	
+	return;
+
+err_out_mode:
+	device_remove_file(led_cdev->dev, &dev_attr_mode);
+err_out_device_name:
+	device_remove_file(led_cdev->dev, &dev_attr_device_name);
+err_out:
+	led_cdev->trigger_data = NULL;
+	kfree(trigger_data);
+}
+
+static void netdev_trig_deactivate(struct led_classdev *led_cdev)
+{
+	struct led_netdev_data *trigger_data = led_cdev->trigger_data;
+
+	if (trigger_data) {	  
+		unregister_netdevice_notifier(&trigger_data->notifier);
+
+		device_remove_file(led_cdev->dev, &dev_attr_device_name);
+		device_remove_file(led_cdev->dev, &dev_attr_mode);
+		device_remove_file(led_cdev->dev, &dev_attr_interval);
+
+		write_lock(&trigger_data->lock);
+		
+		if (trigger_data->net_dev) {
+			dev_put(trigger_data->net_dev);
+			trigger_data->net_dev = NULL;
+		}
+		
+		write_unlock(&trigger_data->lock);
+
+		del_timer_sync(&trigger_data->timer);
+
+		kfree(trigger_data);
+	}
+}
+
+static struct led_trigger netdev_led_trigger = {
+	.name     = "netdev",
+	.activate = netdev_trig_activate,
+	.deactivate = netdev_trig_deactivate,
+};
+
+static int __init netdev_trig_init(void)
+{
+	return led_trigger_register(&netdev_led_trigger);
+}
+
+static void __exit netdev_trig_exit(void)
+{
+	led_trigger_unregister(&netdev_led_trigger);
+}
+
+module_init(netdev_trig_init);
+module_exit(netdev_trig_exit);
+
+MODULE_AUTHOR("Oliver Jowett <oliver@opencloud.com>");
+MODULE_DESCRIPTION("Netdev LED trigger");
+MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/files/Documentation/pwm.txt b/target/linux/generic/files/Documentation/pwm.txt
new file mode 100644
index 0000000000..2c41ca5867
--- /dev/null
+++ b/target/linux/generic/files/Documentation/pwm.txt
@@ -0,0 +1,260 @@
+                       Generic PWM Device API
+
+                          February 1, 2010
+                            Bill Gatliff
+                        <bgat@billgatliff.com>
+
+
+
+The code in drivers/pwm and include/linux/pwm/ implements an API for
+applications involving pulse-width-modulation signals.  This document
+describes how the API implementation facilitates both PWM-generating
+devices, and users of those devices.
+
+
+
+Motivation
+
+The primary goals for implementing the "generic PWM API" are to
+consolidate the various PWM implementations within a consistent and
+redundancy-reducing framework, and to facilitate the use of
+hotpluggable PWM devices.
+
+Previous PWM-related implementations within the Linux kernel achieved
+their consistency via cut-and-paste, but did not need to (and didn't)
+facilitate more than one PWM-generating device within the system---
+hotplug or otherwise.  The Generic PWM Device API might be most
+appropriately viewed as an update to those implementations, rather
+than a complete rewrite.
+
+
+
+Challenges
+
+One of the difficulties in implementing a generic PWM framework is the
+fact that pulse-width-modulation applications involve real-world
+signals, which often must be carefully managed to prevent destruction
+of hardware that is linked to those signals.  A DC motor that
+experiences a brief interruption in the PWM signal controlling it
+might destructively overheat; it could suddenly change speed, losing
+synchronization with a sensor; it could even suddenly change direction
+or torque, breaking the mechanical device connected to it.
+
+(A generic PWM device framework is not directly responsible for
+preventing the above scenarios: that responsibility lies with the
+hardware designer, and the application and driver authors.  But it
+must to the greatest extent possible make it easy to avoid such
+problems).
+
+A generic PWM device framework must accommodate the substantial
+differences between available PWM-generating hardware devices, without
+becoming sub-optimal for any of them.
+
+Finally, a generic PWM device framework must be relatively
+lightweight, computationally speaking.  Some PWM users demand
+high-speed outputs, plus the ability to regulate those outputs
+quickly.  A device framework must be able to "keep up" with such
+hardware, while still leaving time to do real work.
+
+The Generic PWM Device API is an attempt to meet all of the above
+requirements.  At its initial publication, the API was already in use
+managing small DC motors, sensors and solenoids through a
+custom-designed, optically-isolated H-bridge driver.
+
+
+
+Functional Overview
+
+The Generic PWM Device API framework is implemented in
+include/linux/pwm/pwm.h and drivers/pwm/pwm.c.  The functions therein
+use information from pwm_device, pwm_channel and pwm_channel_config
+structures to invoke services in PWM peripheral device drivers.
+Consult drivers/pwm/atmel-pwm.c for an example driver.
+
+There are two classes of adopters of the PWM framework:
+
+  "Users" -- those wishing to employ the API merely to produce PWM
+  signals; once they have identified the appropriate physical output
+  on the platform in question, they don't care about the details of
+  the underlying hardware
+
+  "Driver authors" -- those wishing to bind devices that can generate
+  PWM signals to the Generic PWM Device API, so that the services of
+  those devices become available to users. Assuming the hardware can
+  support the needs of a user, driver authors don't care about the
+  details of the user's application
+
+Generally speaking, users will first invoke pwm_request() to obtain a
+handle to a PWM device.  They will then pass that handle to functions
+like pwm_duty_ns() and pwm_period_ns() to set the duty cycle and
+period of the PWM signal, respectively.  They will also invoke
+pwm_start() and pwm_stop() to turn the signal on and off.
+
+The Generic PWM API framework also provides a sysfs interface to PWM
+devices, which is adequate for basic application needs and testing.
+
+Driver authors fill out a pwm_device structure, which describes the
+capabilities of the PWM hardware being constructed--- including the
+number of distinct output "channels" the peripheral offers.  They then
+invoke pwm_register() (usually from within their device's probe()
+handler) to make the PWM API aware of their device.  The framework
+will call back to the methods described in the pwm_device structure as
+users begin to configure and utilize the hardware.
+
+Note that PWM signals can be produced by a variety of peripherals,
+beyond the true "PWM hardware" offered by many system-on-chip devices.
+Other possibilities include timer/counters with compare-match
+capabilities, carefully-programmed synchronous serial ports
+(e.g. SPI), and GPIO pins driven by kernel interval timers.  With a
+proper pwm_device structure, these devices and pseudo-devices can all
+be accommodated by the Generic PWM Device API framework.
+
+
+
+Using the API to Generate PWM Signals -- Basic Functions for Users
+
+
+pwm_request() -- Returns a pwm_channel pointer, which is subsequently
+passed to the other user-related PWM functions.  Once requested, a PWM
+channel is marked as in-use and subsequent requests prior to
+pwm_free() will fail.
+
+The names used to refer to PWM devices are defined by driver authors.
+Typically they are platform device bus identifiers, and this
+convention is encouraged for consistency.
+
+
+pwm_free() -- Marks a PWM channel as no longer in use.  The PWM device
+is stopped before it is released by the API.
+
+
+pwm_period_ns() -- Specifies the PWM signal's period, in nanoseconds.
+
+
+pwm_duty_ns() -- Specifies the PWM signal's active duration, in nanoseconds.
+
+
+pwm_duty_percent() -- Specifies the PWM signal's active duration, as a
+percentage of the current period of the signal.  NOTE: this value is
+not recalculated if the period of the signal is subsequently changed.
+
+
+pwm_start(), pwm_stop() -- Turns the PWM signal on and off.  Except
+where stated otherwise by a driver author, signals are stopped at the
+end of the current period, at which time the output is set to its
+inactive state.
+
+
+pwm_polarity() -- Defines whether the PWM signal output's active
+region is "1" or "0".  A 10% duty-cycle, polarity=1 signal will
+conventionally be at 5V (or 3.3V, or 1000V, or whatever the platform
+hardware does) for 10% of the period.  The same configuration of a
+polarity=0 signal will be at 5V (or 3.3V, or ...) for 90% of the
+period.
+
+
+
+Using the API to Generate PWM Signals -- Advanced Functions
+
+
+pwm_config() -- Passes a pwm_channel_config structure to the
+associated device driver.  This function is invoked by pwm_start(),
+pwm_duty_ns(), etc. and is one of two main entry points to the PWM
+driver for the hardware being used.  The configuration change is
+guaranteed atomic if multiple configuration changes are specified.
+This function might sleep, depending on what the device driver has to
+do to satisfy the request.  All PWM device drivers must support this
+entry point.
+
+
+pwm_config_nosleep() -- Passes a pwm_channel_config structure to the
+associated device driver.  If the driver must sleep in order to
+implement the requested configuration change, -EWOULDBLOCK is
+returned.  Users may call this function from interrupt handlers, for
+example.  This is the other main entry point into the PWM hardware
+driver, but not all device drivers support this entry point.
+
+
+pwm_synchronize(), pwm_unsynchronize() -- "Synchronizes" two or more
+PWM channels, if the underlying hardware permits.  (If it doesn't, the
+framework facilitates emulating this capability but it is not yet
+implemented).  Synchronized channels will start and stop
+simultaneously when any single channel in the group is started or
+stopped.  Use pwm_unsynchronize(..., NULL) to completely detach a
+channel from any other synchronized channels.  By default, all PWM
+channels are unsynchronized.
+
+
+pwm_set_handler() -- Defines an end-of-period callback.  The indicated
+function will be invoked in a worker thread at the end of each PWM
+period, and can subsequently invoke pwm_config(), etc.  Must be used
+with extreme care for high-speed PWM outputs.  Set the handler
+function to NULL to un-set the handler.
+
+
+
+Implementing a PWM Device API Driver -- Functions for Driver Authors
+
+
+Fill out the appropriate fields in a pwm_device structure, and submit
+to pwm_register():
+
+
+bus_id -- the plain-text name of the device.  Users will bind to a
+channel on the device using this name plus the channel number.  For
+example, the Atmel PWMC's bus_id is "atmel_pwmc", the same as used by
+the platform device driver (recommended).  The first device registered
+thereby receives bus_id "atmel_pwmc.0", which is what you put in
+pwm_device.bus_id.  Channels are then named "atmel_pwmc.0:[0-3]".
+(Hint: just use pdev->dev.bus_id in your probe() method).
+
+
+nchan -- the number of distinct output channels provided by the device.
+
+
+request -- (optional) Invoked each time a user requests a channel.
+Use to turn on clocks, clean up register states, etc.  The framework
+takes care of device locking/unlocking; you will see only successful
+requests.
+
+
+free -- (optional) Callback for each time a user relinquishes a
+channel.  The framework will have already stopped, unsynchronized and
+un-handled the channel.  Use to turn off clocks, etc. as necessary.
+
+
+synchronize, unsynchronize -- (optional) Callbacks to
+synchronize/unsynchronize channels.  Some devices provide this
+capability in hardware; for others, it can be emulated (see
+atmel_pwmc.c's sync_mask for an example).
+
+
+set_callback -- (optional) Invoked when a user requests a handler.  If
+the hardware supports an end-of-period interrupt, invoke the function
+indicated during your interrupt handler.  The callback function itself
+is always internal to the API, and does not map directly to the user's
+callback function.
+
+
+config -- Invoked to change the device configuration, always from a
+sleep-capable context.  All the changes indicated must be performed
+atomically, ideally synchronized to an end-of-period event (so that
+you avoid short or long output pulses).  You may sleep, etc. as
+necessary within this function.
+
+
+config_nosleep -- (optional) Invoked to change device configuration
+from within a context that is not allowed to sleep.  If you cannot
+perform the requested configuration changes without sleeping, return
+-EWOULDBLOCK.
+
+
+
+Acknowledgements
+
+
+The author expresses his gratitude to the countless developers who
+have reviewed and submitted feedback on the various versions of the
+Generic PWM Device API code, and those who have submitted drivers and
+applications that use the framework.  You know who you are.  ;)
+
diff --git a/target/linux/generic/files/arch/mips/fw/myloader/Makefile b/target/linux/generic/files/arch/mips/fw/myloader/Makefile
new file mode 100644
index 0000000000..34acfd01cc
--- /dev/null
+++ b/target/linux/generic/files/arch/mips/fw/myloader/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Compex's MyLoader support on MIPS architecture
+#
+
+lib-y += myloader.o
diff --git a/target/linux/generic/files/arch/mips/fw/myloader/myloader.c b/target/linux/generic/files/arch/mips/fw/myloader/myloader.c
new file mode 100644
index 0000000000..a26f9ad3fd
--- /dev/null
+++ b/target/linux/generic/files/arch/mips/fw/myloader/myloader.c
@@ -0,0 +1,63 @@
+/*
+ *  Compex's MyLoader specific prom routines
+ *
+ *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/string.h>
+
+#include <asm/addrspace.h>
+#include <asm/fw/myloader/myloader.h>
+
+#define SYS_PARAMS_ADDR		KSEG1ADDR(0x80000800)
+#define BOARD_PARAMS_ADDR	KSEG1ADDR(0x80000A00)
+#define PART_TABLE_ADDR		KSEG1ADDR(0x80000C00)
+#define BOOT_PARAMS_ADDR	KSEG1ADDR(0x80000E00)
+
+static struct myloader_info myloader_info __initdata;
+static int myloader_found __initdata;
+
+struct myloader_info * __init myloader_get_info(void)
+{
+	struct mylo_system_params *sysp;
+	struct mylo_board_params *boardp;
+	struct mylo_partition_table *parts;
+
+	if (myloader_found)
+		return &myloader_info;
+
+	sysp = (struct mylo_system_params *)(SYS_PARAMS_ADDR);
+	boardp = (struct mylo_board_params *)(BOARD_PARAMS_ADDR);
+	parts = (struct mylo_partition_table *)(PART_TABLE_ADDR);
+
+	printk(KERN_DEBUG "MyLoader: sysp=%08x, boardp=%08x, parts=%08x\n",
+		sysp->magic, boardp->magic, parts->magic);
+
+	/* Check for some magic numbers */
+	if (sysp->magic != MYLO_MAGIC_SYS_PARAMS ||
+	    boardp->magic != MYLO_MAGIC_BOARD_PARAMS ||
+	    le32_to_cpu(parts->magic) != MYLO_MAGIC_PARTITIONS)
+		return NULL;
+
+	printk(KERN_DEBUG "MyLoader: id=%04x:%04x, sub_id=%04x:%04x\n",
+		sysp->vid, sysp->did, sysp->svid, sysp->sdid);
+
+	myloader_info.vid = sysp->vid;
+	myloader_info.did = sysp->did;
+	myloader_info.svid = sysp->svid;
+	myloader_info.sdid = sysp->sdid;
+
+	memcpy(myloader_info.macs, boardp->addr, sizeof(myloader_info.macs));
+
+	myloader_found = 1;
+
+	return &myloader_info;
+}
diff --git a/target/linux/generic/files/crypto/ocf/Config.in b/target/linux/generic/files/crypto/ocf/Config.in
new file mode 100644
index 0000000000..d722cba299
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/Config.in
@@ -0,0 +1,36 @@
+#############################################################################
+
+mainmenu_option next_comment
+comment 'OCF Configuration'
+tristate 'OCF (Open Cryptograhic Framework)' CONFIG_OCF_OCF
+dep_mbool '  enable fips RNG checks (fips check on RNG data before use)' \
+				CONFIG_OCF_FIPS $CONFIG_OCF_OCF
+dep_mbool '  enable harvesting entropy for /dev/random' \
+				CONFIG_OCF_RANDOMHARVEST $CONFIG_OCF_OCF
+dep_tristate '  cryptodev (user space support)' \
+				CONFIG_OCF_CRYPTODEV $CONFIG_OCF_OCF
+dep_tristate '  cryptosoft (software crypto engine)' \
+				CONFIG_OCF_CRYPTOSOFT $CONFIG_OCF_OCF
+dep_tristate '  safenet (HW crypto engine)' \
+				CONFIG_OCF_SAFE $CONFIG_OCF_OCF
+dep_tristate '  IXP4xx (HW crypto engine)' \
+				CONFIG_OCF_IXP4XX $CONFIG_OCF_OCF
+dep_mbool    '  Enable IXP4xx HW to perform SHA1 and MD5 hashing (very slow)' \
+				CONFIG_OCF_IXP4XX_SHA1_MD5 $CONFIG_OCF_IXP4XX
+dep_tristate '  hifn (HW crypto engine)' \
+				CONFIG_OCF_HIFN $CONFIG_OCF_OCF
+dep_tristate '  talitos (HW crypto engine)' \
+				CONFIG_OCF_TALITOS $CONFIG_OCF_OCF
+dep_tristate '  pasemi (HW crypto engine)' \
+				CONFIG_OCF_PASEMI $CONFIG_OCF_OCF
+dep_tristate '  ep80579 (HW crypto engine)' \
+				CONFIG_OCF_EP80579 $CONFIG_OCF_OCF
+dep_tristate '  Micronas c7108 (HW crypto engine)' \
+				CONFIG_OCF_C7108 $CONFIG_OCF_OCF
+dep_tristate '  ocfnull (does no crypto)' \
+				CONFIG_OCF_OCFNULL $CONFIG_OCF_OCF
+dep_tristate '  ocf-bench (HW crypto in-kernel benchmark)' \
+				CONFIG_OCF_BENCH $CONFIG_OCF_OCF
+endmenu
+
+#############################################################################
diff --git a/target/linux/generic/files/crypto/ocf/Kconfig b/target/linux/generic/files/crypto/ocf/Kconfig
new file mode 100644
index 0000000000..b9c24fff4b
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/Kconfig
@@ -0,0 +1,119 @@
+menu "OCF Configuration"
+
+config OCF_OCF
+	tristate "OCF (Open Cryptograhic Framework)"
+	help
+	  A linux port of the OpenBSD/FreeBSD crypto framework.
+
+config OCF_RANDOMHARVEST
+	bool "crypto random --- harvest entropy for /dev/random"
+	depends on OCF_OCF
+	help
+	  Includes code to harvest random numbers from devices that support it.
+
+config OCF_FIPS
+	bool "enable fips RNG checks"
+	depends on OCF_OCF && OCF_RANDOMHARVEST
+	help
+	  Run all RNG provided data through a fips check before
+	  adding it /dev/random's entropy pool.
+
+config OCF_CRYPTODEV
+	tristate "cryptodev (user space support)"
+	depends on OCF_OCF
+	help
+	  The user space API to access crypto hardware.
+
+config OCF_CRYPTOSOFT
+	tristate "cryptosoft (software crypto engine)"
+	depends on OCF_OCF
+	help
+	  A software driver for the OCF framework that uses
+	  the kernel CryptoAPI.
+
+config OCF_SAFE
+	tristate "safenet (HW crypto engine)"
+	depends on OCF_OCF
+	help
+	  A driver for a number of the safenet Excel crypto accelerators.
+	  Currently tested and working on the 1141 and 1741.
+
+config OCF_IXP4XX
+	tristate "IXP4xx (HW crypto engine)"
+	depends on OCF_OCF
+	help
+	  XScale IXP4xx crypto accelerator driver.  Requires the
+	  Intel Access library.
+
+config OCF_IXP4XX_SHA1_MD5
+	bool "IXP4xx SHA1 and MD5 Hashing"
+	depends on OCF_IXP4XX
+	help
+	  Allows the IXP4xx crypto accelerator to perform SHA1 and MD5 hashing.
+	  Note: this is MUCH slower than using cryptosoft (software crypto engine).
+
+config OCF_HIFN
+	tristate "hifn (HW crypto engine)"
+	depends on OCF_OCF
+	help
+	  OCF driver for various HIFN based crypto accelerators.
+	  (7951, 7955, 7956, 7751, 7811)
+
+config OCF_HIFNHIPP
+	tristate "Hifn HIPP (HW packet crypto engine)"
+	depends on OCF_OCF
+	help
+	  OCF driver for various HIFN (HIPP) based crypto accelerators
+	  (7855)
+
+config OCF_TALITOS
+	tristate "talitos (HW crypto engine)"
+	depends on OCF_OCF
+	help
+	  OCF driver for Freescale's security engine (SEC/talitos).
+
+config OCF_PASEMI
+	tristate "pasemi (HW crypto engine)"
+	depends on OCF_OCF && PPC_PASEMI
+	help
+	  OCF driver for the PA Semi PWRficient DMA Engine
+
+config OCF_EP80579
+	tristate "ep80579 (HW crypto engine)"
+	depends on OCF_OCF
+	help
+	  OCF driver for the Intel EP80579 Integrated Processor Product Line.
+
+config OCF_CRYPTOCTEON
+	tristate "cryptocteon (HW crypto engine)"
+	depends on OCF_OCF
+	help
+	  OCF driver for the Cavium OCTEON Processors.
+
+config OCF_KIRKWOOD
+	tristate "kirkwood (HW crypto engine)"
+	depends on OCF_OCF
+	help
+	  OCF driver for the Marvell Kirkwood (88F6xxx) Processors.
+
+config OCF_C7108
+	tristate "Micronas 7108 (HW crypto engine)"
+	depends on OCF_OCF
+	help
+	  OCF driver for the Microna 7108 Cipher processors.
+
+config OCF_OCFNULL
+	tristate "ocfnull (fake crypto engine)"
+	depends on OCF_OCF
+	help
+	  OCF driver for measuring ipsec overheads (does no crypto)
+
+config OCF_BENCH
+	tristate "ocf-bench (HW crypto in-kernel benchmark)"
+	depends on OCF_OCF
+	help
+	  A very simple encryption test for the in-kernel interface
+	  of OCF.  Also includes code to benchmark the IXP Access library
+	  for comparison.
+
+endmenu
diff --git a/target/linux/generic/files/crypto/ocf/Makefile b/target/linux/generic/files/crypto/ocf/Makefile
new file mode 100644
index 0000000000..fa951f401c
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/Makefile
@@ -0,0 +1,124 @@
+# for SGlinux builds
+-include $(ROOTDIR)/modules/.config
+
+OCF_OBJS = crypto.o criov.o
+
+ifdef CONFIG_OCF_RANDOMHARVEST
+	OCF_OBJS += random.o
+endif
+
+ifdef CONFIG_OCF_FIPS
+	OCF_OBJS += rndtest.o
+endif
+
+# Add in autoconf.h to get #defines for CONFIG_xxx
+AUTOCONF_H=$(ROOTDIR)/modules/autoconf.h
+ifeq ($(AUTOCONF_H), $(wildcard $(AUTOCONF_H)))
+	EXTRA_CFLAGS += -include $(AUTOCONF_H)
+	export EXTRA_CFLAGS
+endif
+
+ifndef obj
+	obj ?= .
+	_obj = subdir
+	mod-subdirs := safe hifn ixp4xx talitos ocfnull
+	export-objs += crypto.o criov.o random.o
+	list-multi += ocf.o
+	_slash :=
+else
+	_obj = obj
+	_slash := /
+endif
+
+EXTRA_CFLAGS += -I$(obj)/.
+
+obj-$(CONFIG_OCF_OCF)         += ocf.o
+obj-$(CONFIG_OCF_CRYPTODEV)   += cryptodev.o
+obj-$(CONFIG_OCF_CRYPTOSOFT)  += cryptosoft.o
+obj-$(CONFIG_OCF_BENCH)       += ocf-bench.o
+
+$(_obj)-$(CONFIG_OCF_SAFE)    += safe$(_slash)
+$(_obj)-$(CONFIG_OCF_HIFN)    += hifn$(_slash)
+$(_obj)-$(CONFIG_OCF_IXP4XX)  += ixp4xx$(_slash)
+$(_obj)-$(CONFIG_OCF_TALITOS) += talitos$(_slash)
+$(_obj)-$(CONFIG_OCF_PASEMI)  += pasemi$(_slash)
+$(_obj)-$(CONFIG_OCF_EP80579) += ep80579$(_slash)
+$(_obj)-$(CONFIG_OCF_CRYPTOCTEON) += cryptocteon$(_slash)
+$(_obj)-$(CONFIG_OCF_KIRKWOOD) += kirkwood$(_slash)
+$(_obj)-$(CONFIG_OCF_OCFNULL) += ocfnull$(_slash)
+$(_obj)-$(CONFIG_OCF_C7108) += c7108$(_slash)
+
+ocf-objs := $(OCF_OBJS)
+
+$(list-multi) dummy1: $(ocf-objs)
+	$(LD) -r -o $@ $(ocf-objs)
+
+.PHONY:
+clean:
+	rm -f *.o *.ko .*.o.flags .*.ko.cmd .*.o.cmd .*.mod.o.cmd *.mod.c
+	rm -f */*.o */*.ko */.*.o.cmd */.*.ko.cmd */.*.mod.o.cmd */*.mod.c */.*.o.flags
+
+ifdef TOPDIR
+-include $(TOPDIR)/Rules.make
+endif
+
+#
+# release gen targets
+#
+
+.PHONY: patch
+patch:
+	REL=`date +%Y%m%d`; \
+		patch=ocf-linux-$$REL.patch; \
+		patch24=ocf-linux-24-$$REL.patch; \
+		patch26=ocf-linux-26-$$REL.patch; \
+		( \
+			find . -name Makefile; \
+			find . -name Config.in; \
+			find . -name Kconfig; \
+			find . -name README; \
+			find . -name '*.[ch]' | grep -v '.mod.c'; \
+		) | while read t; do \
+			diff -Nau /dev/null $$t | sed 's?^+++ \./?+++ linux/crypto/ocf/?'; \
+		done > $$patch; \
+		cat patches/linux-2.4.35-ocf.patch $$patch > $$patch24; \
+		cat patches/linux-2.6.33-ocf.patch $$patch > $$patch26
+
+.PHONY: tarball
+tarball:
+	REL=`date +%Y%m%d`; RELDIR=/tmp/ocf-linux-$$REL; \
+		CURDIR=`pwd`; \
+		rm -rf /tmp/ocf-linux-$$REL*; \
+		mkdir -p $$RELDIR/tools; \
+		cp README* $$RELDIR; \
+		cp patches/openss*.patch $$RELDIR; \
+		cp patches/crypto-tools.patch $$RELDIR; \
+		cp tools/[!C]* $$RELDIR/tools; \
+		cd ..; \
+		tar cvf $$RELDIR/ocf-linux.tar \
+					--exclude=CVS \
+					--exclude=.* \
+					--exclude=*.o \
+					--exclude=*.ko \
+					--exclude=*.mod.* \
+					--exclude=README* \
+					--exclude=ocf-*.patch \
+					--exclude=ocf/patches/openss*.patch \
+					--exclude=ocf/patches/crypto-tools.patch \
+					--exclude=ocf/tools \
+					ocf; \
+		gzip -9 $$RELDIR/ocf-linux.tar; \
+		cd /tmp; \
+		tar cvf ocf-linux-$$REL.tar ocf-linux-$$REL; \
+		gzip -9 ocf-linux-$$REL.tar; \
+		cd $$CURDIR/../../user; \
+		rm -rf /tmp/crypto-tools-$$REL*; \
+		tar cvf /tmp/crypto-tools-$$REL.tar \
+					--exclude=CVS \
+					--exclude=.* \
+					--exclude=*.o \
+					--exclude=cryptotest \
+					--exclude=cryptokeytest \
+					crypto-tools; \
+		gzip -9 /tmp/crypto-tools-$$REL.tar
+
diff --git a/target/linux/generic/files/crypto/ocf/README b/target/linux/generic/files/crypto/ocf/README
new file mode 100644
index 0000000000..5ac39f7304
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/README
@@ -0,0 +1,167 @@
+README - ocf-linux-20100325
+---------------------------
+
+This README provides instructions for getting ocf-linux compiled and
+operating in a generic linux environment.  For other information you
+might like to visit the home page for this project:
+
+    http://ocf-linux.sourceforge.net/
+
+Adding OCF to linux
+-------------------
+
+    Not much in this file for now,  just some notes.  I usually build
+    the ocf support as modules but it can be built into the kernel as
+    well.  To use it:
+
+    * mknod /dev/crypto c 10 70
+
+    * to add OCF to your kernel source,  you have two options.  Apply
+      the kernel specific patch:
+
+          cd linux-2.4*; gunzip < ocf-linux-24-XXXXXXXX.patch.gz | patch -p1
+          cd linux-2.6*; gunzip < ocf-linux-26-XXXXXXXX.patch.gz | patch -p1
+    
+      if you do one of the above,  then you can proceed to the next step,
+      or you can do the above process by hand with using the patches against
+      linux-2.4.35 and 2.6.33 to include the ocf code under crypto/ocf.
+      Here's how to add it:
+
+      for 2.4.35 (and later)
+
+          cd linux-2.4.35/crypto
+          tar xvzf ocf-linux.tar.gz
+          cd ..
+          patch -p1 < crypto/ocf/patches/linux-2.4.35-ocf.patch
+
+      for 2.6.23 (and later),  find the kernel patch specific (or nearest)
+      to your kernel versions and then:
+
+          cd linux-2.6.NN/crypto
+          tar xvzf ocf-linux.tar.gz
+          cd ..
+          patch -p1 < crypto/ocf/patches/linux-2.6.NN-ocf.patch
+
+      It should be easy to take this patch and apply it to other more
+      recent versions of the kernels.  The same patches should also work
+      relatively easily on kernels as old as 2.6.11 and 2.4.18.
+      
+    * under 2.4 if you are on a non-x86 platform,  you may need to:
+
+        cp linux-2.X.x/include/asm-i386/kmap_types.h linux-2.X.x/include/asm-YYY
+
+      so that you can build the kernel crypto support needed for the cryptosoft
+      driver.
+
+    * For simplicity you should enable all the crypto support in your kernel
+      except for the test driver.  Likewise for the OCF options.  Do not
+      enable OCF crypto drivers for HW that you do not have (for example
+      ixp4xx will not compile on non-Xscale systems).
+
+    * make sure that cryptodev.h (from ocf-linux.tar.gz) is installed as
+      crypto/cryptodev.h in an include directory that is used for building
+      applications for your platform.  For example on a host system that
+      might be:
+
+              /usr/include/crypto/cryptodev.h
+
+    * patch your openssl-0.9.8n code with the openssl-0.9.8n.patch.
+      (NOTE: there is no longer a need to patch ssh). The patch is against:
+      openssl-0_9_8e
+
+      If you need a patch for an older version of openssl,  you should look
+      to older OCF releases.  This patch is unlikely to work on older
+      openssl versions.
+
+      openssl-0.9.8n.patch
+                - enables --with-cryptodev for non BSD systems
+                - adds -cpu option to openssl speed for calculating CPU load
+                  under linux
+                - fixes null pointer in openssl speed multi thread output.
+                - fixes test keys to work with linux crypto's more stringent
+                  key checking.
+                - adds MD5/SHA acceleration (Ronen Shitrit), only enabled
+                  with the --with-cryptodev-digests option
+                - fixes bug in engine code caching.
+
+    * build crypto-tools-XXXXXXXX.tar.gz if you want to try some of the BSD
+      tools for testing OCF (ie., cryptotest).
+
+How to load the OCF drivers
+---------------------------
+
+    First insert the base modules:
+
+        insmod ocf
+        insmod cryptodev
+
+    You can then install the software OCF driver with:
+
+        insmod cryptosoft
+
+    and one or more of the OCF HW drivers with:
+
+        insmod safe
+        insmod hifn7751
+        insmod ixp4xx
+        ...
+
+    all the drivers take a debug option to enable verbose debug so that
+    you can see what is going on.  For debug you load them as:
+
+        insmod ocf crypto_debug=1
+        insmod cryptodev cryptodev_debug=1
+        insmod cryptosoft swcr_debug=1
+
+    You may load more than one OCF crypto driver but then there is no guarantee
+    as to which will be used.
+
+    You can also enable debug at run time on 2.6 systems with the following:
+
+        echo 1 > /sys/module/ocf/parameters/crypto_debug
+        echo 1 > /sys/module/cryptodev/parameters/cryptodev_debug
+        echo 1 > /sys/module/cryptosoft/parameters/swcr_debug
+        echo 1 > /sys/module/hifn7751/parameters/hifn_debug
+        echo 1 > /sys/module/safe/parameters/safe_debug
+        echo 1 > /sys/module/ixp4xx/parameters/ixp_debug
+        ...
+
+Testing the OCF support
+-----------------------
+
+    run "cryptotest",  it should do a short test for a couple of
+    des packets.  If it does everything is working.
+
+    If this works,  then ssh will use the driver when invoked as:
+
+        ssh -c 3des username@host
+
+    to see for sure that it is operating, enable debug as defined above.
+
+    To get a better idea of performance run:
+
+        cryptotest 100 4096
+
+    There are more options to cryptotest,  see the help.
+
+    It is also possible to use openssl to test the speed of the crypto
+    drivers.
+
+        openssl speed -evp des -engine cryptodev -elapsed
+        openssl speed -evp des3 -engine cryptodev -elapsed
+        openssl speed -evp aes128 -engine cryptodev -elapsed
+
+    and multiple threads (10) with:
+
+        openssl speed -evp des -engine cryptodev -elapsed -multi 10
+        openssl speed -evp des3 -engine cryptodev -elapsed -multi 10
+        openssl speed -evp aes128 -engine cryptodev -elapsed -multi 10
+
+    for public key testing you can try:
+
+        cryptokeytest
+        openssl speed -engine cryptodev rsa -elapsed
+        openssl speed -engine cryptodev dsa -elapsed
+
+David McCullough
+david_mccullough@mcafee.com
diff --git a/target/linux/generic/files/crypto/ocf/c7108/Makefile b/target/linux/generic/files/crypto/ocf/c7108/Makefile
new file mode 100644
index 0000000000..e7e634b2b5
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/c7108/Makefile
@@ -0,0 +1,12 @@
+# for SGlinux builds
+-include $(ROOTDIR)/modules/.config
+
+obj-$(CONFIG_OCF_C7108) += aes-7108.o
+
+obj ?= .
+EXTRA_CFLAGS += -I$(obj)/.. -I$(obj)/
+
+ifdef TOPDIR
+-include $(TOPDIR)/Rules.make
+endif
+
diff --git a/target/linux/generic/files/crypto/ocf/c7108/aes-7108.c b/target/linux/generic/files/crypto/ocf/c7108/aes-7108.c
new file mode 100644
index 0000000000..a5ac054957
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/c7108/aes-7108.c
@@ -0,0 +1,839 @@
+/*
+ * Copyright (C) 2006 Micronas USA
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in the
+ *   documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Effort sponsored in part by the Defense Advanced Research Projects
+ * Agency (DARPA) and Air Force Research Laboratory, Air Force
+ * Materiel Command, USAF, under agreement number F30602-01-2-0537.
+ *
+ */
+
+//#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/crypto.h>
+#include <linux/mm.h>
+#include <linux/skbuff.h>
+#include <linux/random.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+//#include <asm/scatterlist.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-mapping.h>
+#include <linux/highmem.h>
+#include <cryptodev.h>
+#include <uio.h>
+#include <aes-7108.h>
+
+/* Runtime mode */
+static int c7108_crypto_mode = C7108_AES_CTRL_MODE_CTR;
+//static int c7108_crypto_mode = C7108_AES_CTRL_MODE_CBC;
+
+static int32_t c7108_id = -1;
+static struct cipher_7108 **c7108_sessions = NULL;
+static u_int32_t c7108_sesnum = 0;
+static unsigned long iobar;
+
+/* Crypto entry points */
+static	int c7108_process(void *, struct cryptop *, int);
+static	int c7108_newsession(void *, u_int32_t *, struct cryptoini *);
+static	int c7108_freesession(void *, u_int64_t);
+
+/* Globals */
+static int debug = 0;
+static spinlock_t csr_mutex;
+
+/* Generic controller-based lock */
+#define AES_LOCK()\
+          spin_lock(&csr_mutex)
+#define AES_UNLOCK()\
+          spin_unlock(&csr_mutex)
+
+/* 7108 AES register access */
+#define c7108_reg_wr8(a,d)   iowrite8(d, (void*)(iobar+(a)))
+#define c7108_reg_wr16(a,d)  iowrite16(d, (void*)(iobar+(a)))
+#define c7108_reg_wr32(a,d)  iowrite32(d, (void*)(iobar+(a)))
+#define c7108_reg_rd8(a)     ioread8((void*)(iobar+(a)))
+#define c7108_reg_rd16(a)    ioread16((void*)(iobar+(a)))
+#define c7108_reg_rd32(a)    ioread32((void*)(iobar+(a)))
+
+static int 
+c7108_xlate_key(int klen, u8* k8ptr, u32* k32ptr)
+{
+        int i, nw=0;
+	nw = ((klen >= 256) ? 8 : (klen >= 192) ? 6 : 4);
+	for ( i = 0; i < nw; i++) { 
+	    k32ptr[i] =    (k8ptr[i+3] << 24) | (k8ptr[i+2] << 16) | 
+		           (k8ptr[i+1] << 8)  | k8ptr[i];
+	    
+	}
+	return 0;
+}
+
+static int 
+c7108_cache_key(int klen, u32* k32ptr, u8* k8ptr)
+{
+        int i, nb=0;
+	u8* ptr = (u8*)k32ptr;
+	nb = ((klen >= 256) ? 32 : (klen >= 192) ? 24 : 16);
+	for ( i = 0; i < nb; i++)
+	    k8ptr[i] = ptr[i];
+	return 0;
+}
+
+static int
+c7108_aes_setup_dma(u32 src, u32 dst, u32 len)
+{
+        if (len < 16) {
+	    printk("len < 16\n");
+	    return -10;
+	}
+	if (len % 16) {
+	    printk("len not multiple of 16\n");
+	    return -11;
+	}	
+	c7108_reg_wr16(C7108_AES_DMA_SRC0_LO, (u16) src);
+	c7108_reg_wr16(C7108_AES_DMA_SRC0_HI, (u16)((src & 0xffff0000) >> 16));
+	c7108_reg_wr16(C7108_AES_DMA_DST0_LO, (u16) dst);
+	c7108_reg_wr16(C7108_AES_DMA_DST0_HI, (u16)((dst & 0xffff0000) >> 16));
+	c7108_reg_wr16(C7108_AES_DMA_LEN, (u16) ((len / 16) - 1));
+
+	return 0;
+}
+
+static int
+c7108_aes_set_hw_iv(u8 iv[16])
+{
+        c7108_reg_wr16(C7108_AES_IV0_LO, (u16) ((iv[1] << 8) | iv[0]));
+	c7108_reg_wr16(C7108_AES_IV0_HI, (u16) ((iv[3] << 8) | iv[2]));
+	c7108_reg_wr16(C7108_AES_IV1_LO, (u16) ((iv[5] << 8) | iv[4]));
+	c7108_reg_wr16(C7108_AES_IV1_HI, (u16) ((iv[7] << 8) | iv[6]));
+	c7108_reg_wr16(C7108_AES_IV2_LO, (u16) ((iv[9] << 8) | iv[8]));
+	c7108_reg_wr16(C7108_AES_IV2_HI, (u16) ((iv[11] << 8) | iv[10]));
+	c7108_reg_wr16(C7108_AES_IV3_LO, (u16) ((iv[13] << 8) | iv[12]));
+	c7108_reg_wr16(C7108_AES_IV3_HI, (u16) ((iv[15] << 8) | iv[14]));
+
+    return 0;
+}
+
+static void
+c7108_aes_read_dkey(u32 * dkey)
+{
+        dkey[0] = (c7108_reg_rd16(C7108_AES_EKEY0_HI) << 16) | 
+	           c7108_reg_rd16(C7108_AES_EKEY0_LO);
+	dkey[1] = (c7108_reg_rd16(C7108_AES_EKEY1_HI) << 16) | 
+	           c7108_reg_rd16(C7108_AES_EKEY1_LO);
+	dkey[2] = (c7108_reg_rd16(C7108_AES_EKEY2_HI) << 16) | 
+	           c7108_reg_rd16(C7108_AES_EKEY2_LO);
+	dkey[3] = (c7108_reg_rd16(C7108_AES_EKEY3_HI) << 16) | 
+	           c7108_reg_rd16(C7108_AES_EKEY3_LO);
+	dkey[4] = (c7108_reg_rd16(C7108_AES_EKEY4_HI) << 16) | 
+                   c7108_reg_rd16(C7108_AES_EKEY4_LO);
+	dkey[5] = (c7108_reg_rd16(C7108_AES_EKEY5_HI) << 16) | 
+                   c7108_reg_rd16(C7108_AES_EKEY5_LO);
+	dkey[6] = (c7108_reg_rd16(C7108_AES_EKEY6_HI) << 16) | 
+                   c7108_reg_rd16(C7108_AES_EKEY6_LO);
+	dkey[7] = (c7108_reg_rd16(C7108_AES_EKEY7_HI) << 16) | 
+                   c7108_reg_rd16(C7108_AES_EKEY7_LO);
+}
+
+static int
+c7108_aes_cipher(int op,
+		 u32 dst,
+		 u32 src,
+		 u32 len,
+		 int klen,
+		 u16 mode,
+		 u32 key[8],
+		 u8 iv[16])
+{
+        int rv = 0, cnt=0;
+	u16 ctrl = 0, stat = 0;
+
+	AES_LOCK();
+
+	/* Setup key length */
+	if (klen == 128) {
+	    ctrl |= C7108_AES_KEY_LEN_128;
+	} else if (klen == 192) {
+	    ctrl |= C7108_AES_KEY_LEN_192;
+	} else if (klen == 256) {
+	    ctrl |= C7108_AES_KEY_LEN_256;
+	} else {
+	    AES_UNLOCK();
+	    return -3;
+	}
+	
+	/* Check opcode */
+	if (C7108_AES_ENCRYPT == op) {
+	    ctrl |= C7108_AES_ENCRYPT;
+	} else if (C7108_AES_DECRYPT == op) {
+	    ctrl |= C7108_AES_DECRYPT;
+	} else {
+	    AES_UNLOCK();
+	    return -4;
+	}
+	
+	/* check mode */
+	if ( (mode != C7108_AES_CTRL_MODE_CBC) &&
+	     (mode != C7108_AES_CTRL_MODE_CFB) &&
+	     (mode != C7108_AES_CTRL_MODE_OFB) &&
+	     (mode != C7108_AES_CTRL_MODE_CTR) && 
+	     (mode != C7108_AES_CTRL_MODE_ECB) ) { 
+	    AES_UNLOCK();	    
+	    return -5;
+	}
+	
+	/* Now set mode */
+	ctrl |= mode;
+	
+	/* For CFB, OFB, and CTR, neither backward key
+	 * expansion nor key inversion is required.
+	 */
+	if ( (C7108_AES_DECRYPT == op) &&  
+	     (C7108_AES_CTRL_MODE_CBC == mode ||
+	      C7108_AES_CTRL_MODE_ECB == mode ) ){ 
+
+	    /* Program Key */
+	    c7108_reg_wr16(C7108_AES_KEY0_LO, (u16) key[4]);
+	    c7108_reg_wr16(C7108_AES_KEY0_HI, (u16) (key[4] >> 16));
+	    c7108_reg_wr16(C7108_AES_KEY1_LO, (u16) key[5]);
+	    c7108_reg_wr16(C7108_AES_KEY1_HI, (u16) (key[5] >> 16));
+	    c7108_reg_wr16(C7108_AES_KEY2_LO, (u16) key[6]);
+	    c7108_reg_wr16(C7108_AES_KEY2_HI, (u16) (key[6] >> 16));
+	    c7108_reg_wr16(C7108_AES_KEY3_LO, (u16) key[7]);
+	    c7108_reg_wr16(C7108_AES_KEY3_HI, (u16) (key[7] >> 16));
+	    c7108_reg_wr16(C7108_AES_KEY6_LO, (u16) key[2]);
+	    c7108_reg_wr16(C7108_AES_KEY6_HI, (u16) (key[2] >> 16));
+	    c7108_reg_wr16(C7108_AES_KEY7_LO, (u16) key[3]);
+	    c7108_reg_wr16(C7108_AES_KEY7_HI, (u16) (key[3] >> 16));
+	    
+	    
+	    if (192 == klen) { 
+		c7108_reg_wr16(C7108_AES_KEY4_LO, (u16) key[7]);
+		c7108_reg_wr16(C7108_AES_KEY4_HI, (u16) (key[7] >> 16));
+		c7108_reg_wr16(C7108_AES_KEY5_LO, (u16) key[7]);
+		c7108_reg_wr16(C7108_AES_KEY5_HI, (u16) (key[7] >> 16));
+		
+	    } else if (256 == klen) {
+		/* 256 */
+		c7108_reg_wr16(C7108_AES_KEY4_LO, (u16) key[0]);
+		c7108_reg_wr16(C7108_AES_KEY4_HI, (u16) (key[0] >> 16));
+		c7108_reg_wr16(C7108_AES_KEY5_LO, (u16) key[1]);
+		c7108_reg_wr16(C7108_AES_KEY5_HI, (u16) (key[1] >> 16));
+		
+	    }
+	    
+	} else { 
+	    /* Program Key */
+	    c7108_reg_wr16(C7108_AES_KEY0_LO, (u16) key[0]);
+	    c7108_reg_wr16(C7108_AES_KEY0_HI, (u16) (key[0] >> 16));
+	    c7108_reg_wr16(C7108_AES_KEY1_LO, (u16) key[1]);
+	    c7108_reg_wr16(C7108_AES_KEY1_HI, (u16) (key[1] >> 16));
+	    c7108_reg_wr16(C7108_AES_KEY2_LO, (u16) key[2]);
+	    c7108_reg_wr16(C7108_AES_KEY2_HI, (u16) (key[2] >> 16));
+	    c7108_reg_wr16(C7108_AES_KEY3_LO, (u16) key[3]);
+	    c7108_reg_wr16(C7108_AES_KEY3_HI, (u16) (key[3] >> 16));
+	    c7108_reg_wr16(C7108_AES_KEY4_LO, (u16) key[4]);
+	    c7108_reg_wr16(C7108_AES_KEY4_HI, (u16) (key[4] >> 16));
+	    c7108_reg_wr16(C7108_AES_KEY5_LO, (u16) key[5]);
+	    c7108_reg_wr16(C7108_AES_KEY5_HI, (u16) (key[5] >> 16));
+	    c7108_reg_wr16(C7108_AES_KEY6_LO, (u16) key[6]);
+	    c7108_reg_wr16(C7108_AES_KEY6_HI, (u16) (key[6] >> 16));
+	    c7108_reg_wr16(C7108_AES_KEY7_LO, (u16) key[7]);
+	    c7108_reg_wr16(C7108_AES_KEY7_HI, (u16) (key[7] >> 16));
+	    
+	}
+	
+	/* Set IV always */
+	c7108_aes_set_hw_iv(iv);
+	
+	/* Program DMA addresses */
+	if ((rv = c7108_aes_setup_dma(src, dst, len)) < 0) { 
+	    AES_UNLOCK();
+	    return rv;
+	}
+
+	
+	/* Start AES cipher */
+	c7108_reg_wr16(C7108_AES_CTRL, ctrl | C7108_AES_GO);
+	
+	//printk("Ctrl: 0x%x\n", ctrl | C7108_AES_GO);
+	do {
+	    /* TODO: interrupt mode */
+	    //        printk("aes_stat=0x%x\n", stat);
+	    //udelay(100);
+	} while ((cnt++ < 1000000) && 
+		 !((stat=c7108_reg_rd16(C7108_AES_CTRL))&C7108_AES_OP_DONE));
+
+
+	if ((mode == C7108_AES_CTRL_MODE_ECB)||
+	    (mode == C7108_AES_CTRL_MODE_CBC)) { 
+	    /* Save out key when the lock is held ... */
+	    c7108_aes_read_dkey(key);
+	}
+	
+	AES_UNLOCK();
+	return 0;
+	
+}
+
+/*
+ * Generate a new crypto device session.
+ */
+static int
+c7108_newsession(void *arg, u_int32_t *sid, struct cryptoini *cri)
+{
+	struct cipher_7108 **swd;
+	u_int32_t i;
+	char *algo;
+	int mode, xfm_type;
+
+	dprintk("%s()\n", __FUNCTION__);
+	if (sid == NULL || cri == NULL) {
+		dprintk("%s,%d - EINVAL\n", __FILE__, __LINE__);
+		return EINVAL;
+	}
+
+	if (c7108_sessions) {
+		for (i = 1; i < c7108_sesnum; i++)
+			if (c7108_sessions[i] == NULL)
+				break;
+	} else
+		i = 1;		/* NB: to silence compiler warning */
+
+	if (c7108_sessions == NULL || i == c7108_sesnum) {
+	    if (c7108_sessions == NULL) {
+		i = 1; /* We leave c7108_sessions[0] empty */
+		c7108_sesnum = CRYPTO_SW_SESSIONS;
+	    } else
+		c7108_sesnum *= 2;
+	    
+	    swd = kmalloc(c7108_sesnum * sizeof(struct cipher_7108 *), 
+			  GFP_ATOMIC);
+	    if (swd == NULL) {
+		/* Reset session number */
+		if (c7108_sesnum == CRYPTO_SW_SESSIONS)
+		    c7108_sesnum = 0;
+		else
+		    c7108_sesnum /= 2;
+		dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__);
+		return ENOBUFS;
+	    }
+	    memset(swd, 0, c7108_sesnum * sizeof(struct cipher_7108 *));
+	    
+	    /* Copy existing sessions */
+	    if (c7108_sessions) {
+		memcpy(swd, c7108_sessions,
+		       (c7108_sesnum / 2) * sizeof(struct cipher_7108 *));
+		kfree(c7108_sessions);
+	    }
+	    
+	    c7108_sessions = swd;
+
+	}
+	
+	swd = &c7108_sessions[i];
+	*sid = i;
+
+	while (cri) {
+		*swd = (struct cipher_7108 *) 
+		    kmalloc(sizeof(struct cipher_7108), GFP_ATOMIC);
+		if (*swd == NULL) {
+		    c7108_freesession(NULL, i);
+		    dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+		    return ENOBUFS;
+		}
+		memset(*swd, 0, sizeof(struct cipher_7108));
+
+		algo = NULL;
+		mode = 0;
+		xfm_type = HW_TYPE_CIPHER;
+
+		switch (cri->cri_alg) {
+
+		case CRYPTO_AES_CBC:
+			algo = "aes";
+			mode = CRYPTO_TFM_MODE_CBC;
+			c7108_crypto_mode = C7108_AES_CTRL_MODE_CBC;
+			break;
+#if 0
+		case CRYPTO_AES_CTR:
+			algo = "aes_ctr";
+			mode = CRYPTO_TFM_MODE_CBC;
+			c7108_crypto_mode = C7108_AES_CTRL_MODE_CTR;
+			break;
+		case CRYPTO_AES_ECB:
+			algo = "aes_ecb";
+			mode = CRYPTO_TFM_MODE_CBC;
+			c7108_crypto_mode = C7108_AES_CTRL_MODE_ECB;
+			break;
+		case CRYPTO_AES_OFB:
+			algo = "aes_ofb";
+			mode = CRYPTO_TFM_MODE_CBC;
+			c7108_crypto_mode = C7108_AES_CTRL_MODE_OFB;
+			break;
+		case CRYPTO_AES_CFB:
+			algo = "aes_cfb";
+			mode = CRYPTO_TFM_MODE_CBC;
+			c7108_crypto_mode = C7108_AES_CTRL_MODE_CFB;
+			break;
+#endif
+		default:
+		        printk("unsupported crypto algorithm: %d\n", 
+			       cri->cri_alg);
+			return -EINVAL;
+			break;
+		}
+
+
+		if (!algo || !*algo) {
+		    printk("cypher_7108_crypto: Unknown algo 0x%x\n", 
+			   cri->cri_alg);
+		    c7108_freesession(NULL, i);
+		    return EINVAL;
+		}
+		
+		if (xfm_type == HW_TYPE_CIPHER) {
+		    if (debug) {
+			dprintk("%s key:", __FUNCTION__);
+			for (i = 0; i < (cri->cri_klen + 7) / 8; i++)
+			    dprintk("%s0x%02x", (i % 8) ? " " : "\n    ",
+				    cri->cri_key[i]);
+			dprintk("\n");
+		    }
+
+		} else if (xfm_type == SW_TYPE_HMAC || 
+			   xfm_type == SW_TYPE_HASH) {
+		    printk("cypher_7108_crypto: HMAC unsupported!\n");
+		    return -EINVAL;
+		    c7108_freesession(NULL, i);
+		} else {
+		    printk("cypher_7108_crypto: "
+			   "Unhandled xfm_type %d\n", xfm_type);
+		    c7108_freesession(NULL, i);
+		    return EINVAL;
+		}
+		
+		(*swd)->cri_alg = cri->cri_alg;
+		(*swd)->xfm_type = xfm_type;
+		
+		cri = cri->cri_next;
+		swd = &((*swd)->next);
+	}
+	return 0;
+}
+
+/*
+ * Free a session.
+ */
+static int
+c7108_freesession(void *arg, u_int64_t tid)
+{
+	struct cipher_7108 *swd;
+	u_int32_t sid = CRYPTO_SESID2LID(tid);
+
+	dprintk("%s()\n", __FUNCTION__);
+	if (sid > c7108_sesnum || c7108_sessions == NULL ||
+			c7108_sessions[sid] == NULL) {
+		dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+		return(EINVAL);
+	}
+
+	/* Silently accept and return */
+	if (sid == 0)
+		return(0);
+
+	while ((swd = c7108_sessions[sid]) != NULL) {
+		c7108_sessions[sid] = swd->next;
+		kfree(swd);
+	}
+	return 0;
+}
+
+/*
+ * Process a hardware request.
+ */
+static int
+c7108_process(void *arg, struct cryptop *crp, int hint)
+{
+	struct cryptodesc *crd;
+	struct cipher_7108 *sw;
+	u_int32_t lid;
+	int type;
+	u32 hwkey[8];
+
+#define SCATTERLIST_MAX 16
+	struct scatterlist sg[SCATTERLIST_MAX];
+	int sg_num, sg_len, skip;
+	struct sk_buff *skb = NULL;
+	struct uio *uiop = NULL;
+
+	dprintk("%s()\n", __FUNCTION__);
+	/* Sanity check */
+	if (crp == NULL) {
+		dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+		return EINVAL;
+	}
+
+	crp->crp_etype = 0;
+
+	if (crp->crp_desc == NULL || crp->crp_buf == NULL) {
+		dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+		crp->crp_etype = EINVAL;
+		goto done;
+	}
+
+	lid = crp->crp_sid & 0xffffffff;
+	if (lid >= c7108_sesnum || lid == 0 || c7108_sessions == NULL ||
+			c7108_sessions[lid] == NULL) {
+		crp->crp_etype = ENOENT;
+		dprintk("%s,%d: ENOENT\n", __FILE__, __LINE__);
+		goto done;
+	}
+
+	/*
+	 * do some error checking outside of the loop for SKB and IOV
+	 * processing this leaves us with valid skb or uiop pointers
+	 * for later
+	 */
+	if (crp->crp_flags & CRYPTO_F_SKBUF) {
+		skb = (struct sk_buff *) crp->crp_buf;
+		if (skb_shinfo(skb)->nr_frags >= SCATTERLIST_MAX) {
+			printk("%s,%d: %d nr_frags > SCATTERLIST_MAX", 
+			       __FILE__, __LINE__,
+			       skb_shinfo(skb)->nr_frags);
+			goto done;
+		}
+	} else if (crp->crp_flags & CRYPTO_F_IOV) {
+		uiop = (struct uio *) crp->crp_buf;
+		if (uiop->uio_iovcnt > SCATTERLIST_MAX) {
+			printk("%s,%d: %d uio_iovcnt > SCATTERLIST_MAX", 
+			       __FILE__, __LINE__,
+			       uiop->uio_iovcnt);
+			goto done;
+		}
+	}
+
+	/* Go through crypto descriptors, processing as we go */
+	for (crd = crp->crp_desc; crd; crd = crd->crd_next) {
+	    /*
+	     * Find the crypto context.
+	     *
+	     * XXX Note that the logic here prevents us from having
+	     * XXX the same algorithm multiple times in a session
+	     * XXX (or rather, we can but it won't give us the right
+	     * XXX results). To do that, we'd need some way of differentiating
+	     * XXX between the various instances of an algorithm (so we can
+	     * XXX locate the correct crypto context).
+	     */
+	    for (sw = c7108_sessions[lid]; 
+		 sw && sw->cri_alg != crd->crd_alg;
+		 sw = sw->next)
+		;
+	    
+	    /* No such context ? */
+	    if (sw == NULL) {
+		crp->crp_etype = EINVAL;
+		dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+		goto done;
+	    }
+	    
+	    skip = crd->crd_skip;
+	    
+	    /*
+	     * setup the SG list skip from the start of the buffer
+	     */
+	    memset(sg, 0, sizeof(sg));
+	    if (crp->crp_flags & CRYPTO_F_SKBUF) {
+		int i, len;
+		type = CRYPTO_BUF_SKBUF;
+		
+		sg_num = 0;
+		sg_len = 0;
+
+		if (skip < skb_headlen(skb)) {
+		    //sg[sg_num].page   = virt_to_page(skb->data + skip);
+			//sg[sg_num].offset = offset_in_page(skb->data + skip);
+		    len = skb_headlen(skb) - skip;
+		    if (len + sg_len > crd->crd_len)
+			len = crd->crd_len - sg_len;
+		    //sg[sg_num].length = len;
+		    sg_set_page(&sg[sg_num], virt_to_page(skb->data + skip), len, offset_in_page(skb->data + skip));
+			sg_len += sg[sg_num].length;
+		    sg_num++;
+		    skip = 0;
+		} else
+		    skip -= skb_headlen(skb);
+		
+		for (i = 0; sg_len < crd->crd_len &&
+			 i < skb_shinfo(skb)->nr_frags &&
+			 sg_num < SCATTERLIST_MAX; i++) {
+		    if (skip < skb_shinfo(skb)->frags[i].size) {
+			//sg[sg_num].page   = skb_shinfo(skb)->frags[i].page;
+			//sg[sg_num].offset = skb_shinfo(skb)->frags[i].page_offset + skip;
+			len = skb_shinfo(skb)->frags[i].size - skip;
+			if (len + sg_len > crd->crd_len)
+			    len = crd->crd_len - sg_len;
+			//sg[sg_num].length = len;
+			sg_set_page(&sg[sg_num], skb_shinfo(skb)->frags[i].page, len, skb_shinfo(skb)->frags[i].page_offset + skip);
+			sg_len += sg[sg_num].length;
+			sg_num++;
+			skip = 0;
+		    } else
+			skip -= skb_shinfo(skb)->frags[i].size;
+		}
+	    } else if (crp->crp_flags & CRYPTO_F_IOV) {
+		int len;
+		type = CRYPTO_BUF_IOV;
+		sg_len = 0;
+		for (sg_num = 0; sg_len < crd->crd_len &&
+			 sg_num < uiop->uio_iovcnt &&
+			 sg_num < SCATTERLIST_MAX; sg_num++) {
+		    if (skip < uiop->uio_iov[sg_num].iov_len) {
+			//sg[sg_num].page   =			    virt_to_page(uiop->uio_iov[sg_num].iov_base+skip);
+			//sg[sg_num].offset =			   offset_in_page(uiop->uio_iov[sg_num].iov_base+skip);
+			len = uiop->uio_iov[sg_num].iov_len - skip;
+			if (len + sg_len > crd->crd_len)
+			    len = crd->crd_len - sg_len;
+			//sg[sg_num].length = len;
+			sg_set_page(&sg[sg_num], virt_to_page(uiop->uio_iov[sg_num].iov_base+skip), len, offset_in_page(uiop->uio_iov[sg_num].iov_base+skip));
+			sg_len += sg[sg_num].length;
+			skip = 0;
+		    } else 
+			skip -= uiop->uio_iov[sg_num].iov_len;
+		}
+	    } else {
+		type = CRYPTO_BUF_CONTIG;
+		//sg[0].page   = virt_to_page(crp->crp_buf + skip);
+		//sg[0].offset = offset_in_page(crp->crp_buf + skip);
+		sg_len = (crp->crp_ilen - skip);
+		if (sg_len > crd->crd_len)
+		    sg_len = crd->crd_len;
+		//sg[0].length = sg_len;
+		sg_set_page(&sg[0], virt_to_page(crp->crp_buf + skip), sg_len, offset_in_page(crp->crp_buf + skip));
+		sg_num = 1;
+	    }
+	    
+	    
+	    switch (sw->xfm_type) {
+
+	    case HW_TYPE_CIPHER: {
+
+		unsigned char iv[64];
+		unsigned char *ivp = iv;
+		int i;
+		int ivsize = 16;    /* fixed for AES */
+		int blocksize = 16; /* fixed for AES */
+
+		if (sg_len < blocksize) {
+		    crp->crp_etype = EINVAL;
+		    dprintk("%s,%d: EINVAL len %d < %d\n", 
+			    __FILE__, __LINE__,
+			    sg_len, 
+			    blocksize);
+		    goto done;
+		}
+		
+		if (ivsize > sizeof(iv)) {
+		    crp->crp_etype = EINVAL;
+		    dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+		    goto done;
+		}
+		
+		if (crd->crd_flags & CRD_F_ENCRYPT) { /* encrypt */
+		    
+		    if (crd->crd_flags & CRD_F_IV_EXPLICIT) {
+			ivp = crd->crd_iv;
+		    } else {
+			get_random_bytes(ivp, ivsize);
+		    }
+		    /*
+		     * do we have to copy the IV back to the buffer ?
+		     */
+		    if ((crd->crd_flags & CRD_F_IV_PRESENT) == 0) {
+			    crypto_copyback(crp->crp_buf,
+					  crd->crd_inject,
+					  ivsize,
+					  (caddr_t)ivp);
+		    }
+
+		    c7108_xlate_key(crd->crd_klen,
+				    (u8*)crd->crd_key, (u32*)hwkey);
+
+		    /* Encrypt SG list */
+		    for (i = 0; i < sg_num; i++) { 
+			sg[i].dma_address = 
+			    dma_map_single(NULL, 
+					   kmap(sg_page(&sg[i])) + sg[i].offset, sg_len, DMA_BIDIRECTIONAL);
+#if 0							   
+			printk("sg[%d]:0x%08x, off 0x%08x "
+			       "kmap 0x%08x phys 0x%08x\n", 
+			       i, sg[i].page, sg[i].offset,
+			       kmap(sg[i].page) + sg[i].offset,
+			       sg[i].dma_address);
+#endif
+			c7108_aes_cipher(C7108_AES_ENCRYPT,
+					 sg[i].dma_address,
+					 sg[i].dma_address,
+					 sg_len,
+					 crd->crd_klen,
+					 c7108_crypto_mode,
+					 hwkey,
+					 ivp);
+
+			if ((c7108_crypto_mode == C7108_AES_CTRL_MODE_CBC)||
+			    (c7108_crypto_mode == C7108_AES_CTRL_MODE_ECB)) { 
+			    /* Read back expanded key and cache it in key
+			     * context.
+			     * NOTE: for ECB/CBC modes only (not CTR, CFB, OFB)
+			     *       where you set the key once.
+			     */
+			    c7108_cache_key(crd->crd_klen, 
+					    (u32*)hwkey, (u8*)crd->crd_key);
+#if 0
+			    printk("%s expanded key:", __FUNCTION__);
+			    for (i = 0; i < (crd->crd_klen + 7) / 8; i++)
+				printk("%s0x%02x", (i % 8) ? " " : "\n    ",
+				       crd->crd_key[i]);
+			    printk("\n");
+#endif
+			}
+		    }
+		}
+		else { /*decrypt */
+
+		    if (crd->crd_flags & CRD_F_IV_EXPLICIT) {
+			ivp = crd->crd_iv;
+		    } else {
+			crypto_copydata(crp->crp_buf, crd->crd_inject,
+				  ivsize, (caddr_t)ivp);
+		    }
+
+		    c7108_xlate_key(crd->crd_klen,
+				    (u8*)crd->crd_key, (u32*)hwkey);
+
+		    /* Decrypt SG list */
+		    for (i = 0; i < sg_num; i++) { 
+			sg[i].dma_address = 
+			    dma_map_single(NULL, 
+					   kmap(sg_page(&sg[i])) + sg[i].offset,
+					   sg_len, DMA_BIDIRECTIONAL);
+
+#if 0
+			printk("sg[%d]:0x%08x, off 0x%08x "
+			       "kmap 0x%08x phys 0x%08x\n", 
+			       i, sg[i].page, sg[i].offset,
+			       kmap(sg[i].page) + sg[i].offset,
+			       sg[i].dma_address);
+#endif
+			c7108_aes_cipher(C7108_AES_DECRYPT,
+					 sg[i].dma_address,
+					 sg[i].dma_address,
+					 sg_len,
+					 crd->crd_klen,
+					 c7108_crypto_mode,
+					 hwkey,
+					 ivp);
+		    }
+		}
+	    } break;
+	    case SW_TYPE_HMAC:
+	    case SW_TYPE_HASH:
+		crp->crp_etype = EINVAL;
+		goto done;
+		break;
+		
+	    case SW_TYPE_COMP:
+		crp->crp_etype = EINVAL;
+		goto done;
+		break;
+		
+	    default:
+		/* Unknown/unsupported algorithm */
+		dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+		crp->crp_etype = EINVAL;
+		goto done;
+	    }
+	}
+	
+done:
+	crypto_done(crp);
+	return 0;
+}
+
+static struct {                                                                                                                 
+	softc_device_decl sc_dev;                                                                                               
+} a7108dev;
+
+static device_method_t a7108_methods = {                                                                                          
+/* crypto device methods */                                                                                             
+	DEVMETHOD(cryptodev_newsession, c7108_newsession),                                                                  
+	DEVMETHOD(cryptodev_freesession, c7108_freesession),                                                             
+	DEVMETHOD(cryptodev_process, c7108_process),                                                                     
+	DEVMETHOD(cryptodev_kprocess, NULL) 
+};   
+
+static int
+cypher_7108_crypto_init(void)
+{
+	dprintk("%s(%p)\n", __FUNCTION__, cypher_7108_crypto_init);
+	
+	iobar = (unsigned long)ioremap(CCU_AES_REG_BASE, 0x4000);
+	printk("7108: AES @ 0x%08x (0x%08x phys) %s mode\n", 
+	       iobar, CCU_AES_REG_BASE, 
+	       c7108_crypto_mode & C7108_AES_CTRL_MODE_CBC ? "CBC" :
+	       c7108_crypto_mode & C7108_AES_CTRL_MODE_ECB ? "ECB" : 
+	       c7108_crypto_mode & C7108_AES_CTRL_MODE_CTR ? "CTR" : 
+	       c7108_crypto_mode & C7108_AES_CTRL_MODE_CFB ? "CFB" : 
+	       c7108_crypto_mode & C7108_AES_CTRL_MODE_OFB ? "OFB" : "???");
+	csr_mutex  = SPIN_LOCK_UNLOCKED;
+
+	memset(&a7108dev, 0, sizeof(a7108dev));                                                                                     
+	softc_device_init(&a7108dev, "aes7108", 0, a7108_methods);
+
+       	c7108_id = crypto_get_driverid(softc_get_device(&a7108dev), CRYPTOCAP_F_HARDWARE);
+	if (c7108_id < 0)
+		panic("7108: crypto device cannot initialize!");
+
+//	crypto_register(c7108_id, CRYPTO_AES_CBC, 0, 0, c7108_newsession, c7108_freesession, c7108_process, NULL);
+	crypto_register(c7108_id, CRYPTO_AES_CBC, 0, 0);
+
+	return(0);
+}
+
+static void
+cypher_7108_crypto_exit(void)
+{
+	dprintk("%s()\n", __FUNCTION__);
+	crypto_unregister_all(c7108_id);
+	c7108_id = -1;
+}
+
+module_init(cypher_7108_crypto_init);
+module_exit(cypher_7108_crypto_exit);
+
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_DESCRIPTION("Cypher 7108 Crypto (OCF module for kernel crypto)");
diff --git a/target/linux/generic/files/crypto/ocf/c7108/aes-7108.h b/target/linux/generic/files/crypto/ocf/c7108/aes-7108.h
new file mode 100644
index 0000000000..0c7bfcbb83
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/c7108/aes-7108.h
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2006 Micronas USA
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in the
+ *   documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Effort sponsored in part by the Defense Advanced Research Projects
+ * Agency (DARPA) and Air Force Research Laboratory, Air Force
+ * Materiel Command, USAF, under agreement number F30602-01-2-0537.
+ *
+ */
+
+#ifndef __AES_7108_H__
+#define __AES_7108_H__
+
+/* Cypher 7108 AES Controller Hardware */
+#define CCU_REG_BASE       0x1b500000	
+#define CCU_AES_REG_BASE   (CCU_REG_BASE + 0x100)
+#define C7108_AES_KEY0_LO        (0x0000) 
+#define C7108_AES_KEY0_HI        (0x0004) 
+#define C7108_AES_KEY1_LO        (0x0008) 
+#define C7108_AES_KEY1_HI        (0x000c) 
+#define C7108_AES_KEY2_LO        (0x0010) 
+#define C7108_AES_KEY2_HI        (0x0014) 
+#define C7108_AES_KEY3_LO        (0x0018) 
+#define C7108_AES_KEY3_HI        (0x001c) 
+#define C7108_AES_KEY4_LO        (0x0020) 
+#define C7108_AES_KEY4_HI        (0x0024) 
+#define C7108_AES_KEY5_LO        (0x0028) 
+#define C7108_AES_KEY5_HI        (0x002c) 
+#define C7108_AES_KEY6_LO        (0x0030) 
+#define C7108_AES_KEY6_HI        (0x0034) 
+#define C7108_AES_KEY7_LO        (0x0038) 
+#define C7108_AES_KEY7_HI        (0x003c) 
+#define C7108_AES_IV0_LO         (0x0040) 
+#define C7108_AES_IV0_HI         (0x0044) 
+#define C7108_AES_IV1_LO         (0x0048) 
+#define C7108_AES_IV1_HI         (0x004c) 
+#define C7108_AES_IV2_LO         (0x0050) 
+#define C7108_AES_IV2_HI         (0x0054) 
+#define C7108_AES_IV3_LO         (0x0058) 
+#define C7108_AES_IV3_HI         (0x005c) 
+
+#define C7108_AES_DMA_SRC0_LO    (0x0068) /* Bits 0:15 */
+#define C7108_AES_DMA_SRC0_HI    (0x006c) /* Bits 27:16 */
+#define C7108_AES_DMA_DST0_LO    (0x0070) /* Bits 0:15 */
+#define C7108_AES_DMA_DST0_HI    (0x0074) /* Bits 27:16 */
+#define C7108_AES_DMA_LEN        (0x0078)  /*Bytes:(Count+1)x16 */
+
+/* AES/Copy engine control register */
+#define C7108_AES_CTRL           (0x007c) /* AES control */
+#define C7108_AES_CTRL_RS        (1<<0)     /* Which set of src/dst to use */
+
+/* AES Cipher mode, controlled by setting Bits 2:0 */
+#define C7108_AES_CTRL_MODE_CBC     0
+#define C7108_AES_CTRL_MODE_CFB     (1<<0)
+#define C7108_AES_CTRL_MODE_OFB     (1<<1)
+#define C7108_AES_CTRL_MODE_CTR     ((1<<0)|(1<<1))
+#define C7108_AES_CTRL_MODE_ECB     (1<<2)
+
+/* AES Key length , Bits 5:4 */
+#define C7108_AES_KEY_LEN_128         0       /* 00 */
+#define C7108_AES_KEY_LEN_192         (1<<4)  /* 01 */
+#define C7108_AES_KEY_LEN_256         (1<<5)  /* 10 */
+
+/* AES Operation (crypt/decrypt), Bit 3 */
+#define C7108_AES_DECRYPT             (1<<3)   /* Clear for encrypt */
+#define C7108_AES_ENCRYPT              0       
+#define C7108_AES_INTR                (1<<13) /* Set on done trans from 0->1*/
+#define C7108_AES_GO                  (1<<14) /* Run */
+#define C7108_AES_OP_DONE             (1<<15) /* Set when complete */
+
+
+/* Expanded key registers */
+#define C7108_AES_EKEY0_LO            (0x0080)
+#define C7108_AES_EKEY0_HI            (0x0084)
+#define C7108_AES_EKEY1_LO            (0x0088)
+#define C7108_AES_EKEY1_HI            (0x008c)
+#define C7108_AES_EKEY2_LO            (0x0090)
+#define C7108_AES_EKEY2_HI            (0x0094)
+#define C7108_AES_EKEY3_LO            (0x0098)
+#define C7108_AES_EKEY3_HI            (0x009c)
+#define C7108_AES_EKEY4_LO            (0x00a0)
+#define C7108_AES_EKEY4_HI            (0x00a4)
+#define C7108_AES_EKEY5_LO            (0x00a8)
+#define C7108_AES_EKEY5_HI            (0x00ac)
+#define C7108_AES_EKEY6_LO            (0x00b0)
+#define C7108_AES_EKEY6_HI            (0x00b4)
+#define C7108_AES_EKEY7_LO            (0x00b8)
+#define C7108_AES_EKEY7_HI            (0x00bc)
+#define C7108_AES_OK                  (0x00fc) /* Reset: "OK" */
+
+#define offset_in_page(p) ((unsigned long)(p) & ~PAGE_MASK)
+
+/* Software session entry */
+
+#define HW_TYPE_CIPHER	0
+#define SW_TYPE_HMAC	1
+#define SW_TYPE_AUTH2	2
+#define SW_TYPE_HASH	3
+#define SW_TYPE_COMP	4
+
+struct cipher_7108 {
+	int			xfm_type;
+	int			cri_alg;
+	union {
+		struct {
+			char sw_key[HMAC_BLOCK_LEN];
+			int  sw_klen;
+			int  sw_authlen;
+		} hmac;
+	} u;
+	struct cipher_7108	*next;
+};
+
+
+
+#endif /* __C7108_AES_7108_H__ */
diff --git a/target/linux/generic/files/crypto/ocf/criov.c b/target/linux/generic/files/crypto/ocf/criov.c
new file mode 100644
index 0000000000..6d7d3ad452
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/criov.c
@@ -0,0 +1,215 @@
+/*      $OpenBSD: criov.c,v 1.9 2002/01/29 15:48:29 jason Exp $	*/
+
+/*
+ * Linux port done by David McCullough <david_mccullough@mcafee.com>
+ * Copyright (C) 2006-2010 David McCullough
+ * Copyright (C) 2004-2005 Intel Corporation.
+ * The license and original author are listed below.
+ *
+ * Copyright (c) 1999 Theo de Raadt
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in the
+ *   documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+__FBSDID("$FreeBSD: src/sys/opencrypto/criov.c,v 1.5 2006/06/04 22:15:13 pjd Exp $");
+ */
+
+#ifndef AUTOCONF_INCLUDED
+#include <linux/config.h>
+#endif
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/uio.h>
+#include <linux/skbuff.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <asm/io.h>
+
+#include <uio.h>
+#include <cryptodev.h>
+
+/*
+ * This macro is only for avoiding code duplication, as we need to skip
+ * given number of bytes in the same way in three functions below.
+ */
+#define	CUIO_SKIP()	do {						\
+	KASSERT(off >= 0, ("%s: off %d < 0", __func__, off));		\
+	KASSERT(len >= 0, ("%s: len %d < 0", __func__, len));		\
+	while (off > 0) {						\
+		KASSERT(iol >= 0, ("%s: empty in skip", __func__));	\
+		if (off < iov->iov_len)					\
+			break;						\
+		off -= iov->iov_len;					\
+		iol--;							\
+		iov++;							\
+	}								\
+} while (0)
+
+void
+cuio_copydata(struct uio* uio, int off, int len, caddr_t cp)
+{
+	struct iovec *iov = uio->uio_iov;
+	int iol = uio->uio_iovcnt;
+	unsigned count;
+
+	CUIO_SKIP();
+	while (len > 0) {
+		KASSERT(iol >= 0, ("%s: empty", __func__));
+		count = min((int)(iov->iov_len - off), len);
+		memcpy(cp, ((caddr_t)iov->iov_base) + off, count);
+		len -= count;
+		cp += count;
+		off = 0;
+		iol--;
+		iov++;
+	}
+}
+
+void
+cuio_copyback(struct uio* uio, int off, int len, caddr_t cp)
+{
+	struct iovec *iov = uio->uio_iov;
+	int iol = uio->uio_iovcnt;
+	unsigned count;
+
+	CUIO_SKIP();
+	while (len > 0) {
+		KASSERT(iol >= 0, ("%s: empty", __func__));
+		count = min((int)(iov->iov_len - off), len);
+		memcpy(((caddr_t)iov->iov_base) + off, cp, count);
+		len -= count;
+		cp += count;
+		off = 0;
+		iol--;
+		iov++;
+	}
+}
+
+/*
+ * Return a pointer to iov/offset of location in iovec list.
+ */
+struct iovec *
+cuio_getptr(struct uio *uio, int loc, int *off)
+{
+	struct iovec *iov = uio->uio_iov;
+	int iol = uio->uio_iovcnt;
+
+	while (loc >= 0) {
+		/* Normal end of search */
+		if (loc < iov->iov_len) {
+	    		*off = loc;
+	    		return (iov);
+		}
+
+		loc -= iov->iov_len;
+		if (iol == 0) {
+			if (loc == 0) {
+				/* Point at the end of valid data */
+				*off = iov->iov_len;
+				return (iov);
+			} else
+				return (NULL);
+		} else {
+			iov++, iol--;
+		}
+    	}
+
+	return (NULL);
+}
+
+EXPORT_SYMBOL(cuio_copyback);
+EXPORT_SYMBOL(cuio_copydata);
+EXPORT_SYMBOL(cuio_getptr);
+
+
+static void
+skb_copy_bits_back(struct sk_buff *skb, int offset, caddr_t cp, int len)
+{
+	int i;
+	if (offset < skb_headlen(skb)) {
+		memcpy(skb->data + offset, cp, min_t(int, skb_headlen(skb), len));
+		len -= skb_headlen(skb);
+		cp += skb_headlen(skb);
+	}
+	offset -= skb_headlen(skb);
+	for (i = 0; len > 0 && i < skb_shinfo(skb)->nr_frags; i++) {
+		if (offset < skb_shinfo(skb)->frags[i].size) {
+			memcpy(page_address(skb_shinfo(skb)->frags[i].page) +
+					skb_shinfo(skb)->frags[i].page_offset,
+					cp, min_t(int, skb_shinfo(skb)->frags[i].size, len));
+			len -= skb_shinfo(skb)->frags[i].size;
+			cp += skb_shinfo(skb)->frags[i].size;
+		}
+		offset -= skb_shinfo(skb)->frags[i].size;
+	}
+}
+
+void
+crypto_copyback(int flags, caddr_t buf, int off, int size, caddr_t in)
+{
+
+	if ((flags & CRYPTO_F_SKBUF) != 0)
+		skb_copy_bits_back((struct sk_buff *)buf, off, in, size);
+	else if ((flags & CRYPTO_F_IOV) != 0)
+		cuio_copyback((struct uio *)buf, off, size, in);
+	else
+		bcopy(in, buf + off, size);
+}
+
+void
+crypto_copydata(int flags, caddr_t buf, int off, int size, caddr_t out)
+{
+
+	if ((flags & CRYPTO_F_SKBUF) != 0)
+		skb_copy_bits((struct sk_buff *)buf, off, out, size);
+	else if ((flags & CRYPTO_F_IOV) != 0)
+		cuio_copydata((struct uio *)buf, off, size, out);
+	else
+		bcopy(buf + off, out, size);
+}
+
+int
+crypto_apply(int flags, caddr_t buf, int off, int len,
+    int (*f)(void *, void *, u_int), void *arg)
+{
+#if 0
+	int error;
+
+	if ((flags & CRYPTO_F_SKBUF) != 0)
+		error = XXXXXX((struct mbuf *)buf, off, len, f, arg);
+	else if ((flags & CRYPTO_F_IOV) != 0)
+		error = cuio_apply((struct uio *)buf, off, len, f, arg);
+	else
+		error = (*f)(arg, buf + off, len);
+	return (error);
+#else
+	KASSERT(0, ("crypto_apply not implemented!\n"));
+#endif
+	return 0;
+}
+
+EXPORT_SYMBOL(crypto_copyback);
+EXPORT_SYMBOL(crypto_copydata);
+EXPORT_SYMBOL(crypto_apply);
+
diff --git a/target/linux/generic/files/crypto/ocf/crypto.c b/target/linux/generic/files/crypto/ocf/crypto.c
new file mode 100644
index 0000000000..9735f0ce93
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/crypto.c
@@ -0,0 +1,1784 @@
+/*-
+ * Linux port done by David McCullough <david_mccullough@mcafee.com>
+ * Copyright (C) 2006-2010 David McCullough
+ * Copyright (C) 2004-2005 Intel Corporation.
+ * The license and original author are listed below.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * Copyright (c) 2002-2006 Sam Leffler.  All rights reserved.
+ *
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#if 0
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD: src/sys/opencrypto/crypto.c,v 1.27 2007/03/21 03:42:51 sam Exp $");
+#endif
+
+/*
+ * Cryptographic Subsystem.
+ *
+ * This code is derived from the Openbsd Cryptographic Framework (OCF)
+ * that has the copyright shown below.  Very little of the original
+ * code remains.
+ */
+/*-
+ * The author of this code is Angelos D. Keromytis (angelos@cis.upenn.edu)
+ *
+ * This code was written by Angelos D. Keromytis in Athens, Greece, in
+ * February 2000. Network Security Technologies Inc. (NSTI) kindly
+ * supported the development of this code.
+ *
+ * Copyright (c) 2000, 2001 Angelos D. Keromytis
+ *
+ * Permission to use, copy, and modify this software with or without fee
+ * is hereby granted, provided that this entire notice is included in
+ * all source code copies of any software which is or includes a copy or
+ * modification of this software.
+ *
+ * THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTY. IN PARTICULAR, NONE OF THE AUTHORS MAKES ANY
+ * REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE
+ * MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR
+ * PURPOSE.
+ *
+__FBSDID("$FreeBSD: src/sys/opencrypto/crypto.c,v 1.16 2005/01/07 02:29:16 imp Exp $");
+ */
+
+
+#ifndef AUTOCONF_INCLUDED
+#include <linux/config.h>
+#endif
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/wait.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/version.h>
+#include <cryptodev.h>
+
+/*
+ * keep track of whether or not we have been initialised, a big
+ * issue if we are linked into the kernel and a driver gets started before
+ * us
+ */
+static int crypto_initted = 0;
+
+/*
+ * Crypto drivers register themselves by allocating a slot in the
+ * crypto_drivers table with crypto_get_driverid() and then registering
+ * each algorithm they support with crypto_register() and crypto_kregister().
+ */
+
+/*
+ * lock on driver table
+ * we track its state as spin_is_locked does not do anything on non-SMP boxes
+ */
+static spinlock_t	crypto_drivers_lock;
+static int			crypto_drivers_locked;		/* for non-SMP boxes */
+
+#define	CRYPTO_DRIVER_LOCK() \
+			({ \
+				spin_lock_irqsave(&crypto_drivers_lock, d_flags); \
+			 	crypto_drivers_locked = 1; \
+				dprintk("%s,%d: DRIVER_LOCK()\n", __FILE__, __LINE__); \
+			 })
+#define	CRYPTO_DRIVER_UNLOCK() \
+			({ \
+			 	dprintk("%s,%d: DRIVER_UNLOCK()\n", __FILE__, __LINE__); \
+			 	crypto_drivers_locked = 0; \
+				spin_unlock_irqrestore(&crypto_drivers_lock, d_flags); \
+			 })
+#define	CRYPTO_DRIVER_ASSERT() \
+			({ \
+			 	if (!crypto_drivers_locked) { \
+					dprintk("%s,%d: DRIVER_ASSERT!\n", __FILE__, __LINE__); \
+			 	} \
+			 })
+
+/*
+ * Crypto device/driver capabilities structure.
+ *
+ * Synchronization:
+ * (d) - protected by CRYPTO_DRIVER_LOCK()
+ * (q) - protected by CRYPTO_Q_LOCK()
+ * Not tagged fields are read-only.
+ */
+struct cryptocap {
+	device_t	cc_dev;			/* (d) device/driver */
+	u_int32_t	cc_sessions;		/* (d) # of sessions */
+	u_int32_t	cc_koperations;		/* (d) # os asym operations */
+	/*
+	 * Largest possible operator length (in bits) for each type of
+	 * encryption algorithm. XXX not used
+	 */
+	u_int16_t	cc_max_op_len[CRYPTO_ALGORITHM_MAX + 1];
+	u_int8_t	cc_alg[CRYPTO_ALGORITHM_MAX + 1];
+	u_int8_t	cc_kalg[CRK_ALGORITHM_MAX + 1];
+
+	int		cc_flags;		/* (d) flags */
+#define CRYPTOCAP_F_CLEANUP	0x80000000	/* needs resource cleanup */
+	int		cc_qblocked;		/* (q) symmetric q blocked */
+	int		cc_kqblocked;		/* (q) asymmetric q blocked */
+
+	int		cc_unqblocked;		/* (q) symmetric q blocked */
+	int		cc_unkqblocked;		/* (q) asymmetric q blocked */
+};
+static struct cryptocap *crypto_drivers = NULL;
+static int crypto_drivers_num = 0;
+
+/*
+ * There are two queues for crypto requests; one for symmetric (e.g.
+ * cipher) operations and one for asymmetric (e.g. MOD)operations.
+ * A single mutex is used to lock access to both queues.  We could
+ * have one per-queue but having one simplifies handling of block/unblock
+ * operations.
+ */
+static	int crp_sleep = 0;
+static LIST_HEAD(crp_q);		/* request queues */
+static LIST_HEAD(crp_kq);
+
+static spinlock_t crypto_q_lock;
+
+int crypto_all_qblocked = 0;  /* protect with Q_LOCK */
+module_param(crypto_all_qblocked, int, 0444);
+MODULE_PARM_DESC(crypto_all_qblocked, "Are all crypto queues blocked");
+
+int crypto_all_kqblocked = 0; /* protect with Q_LOCK */
+module_param(crypto_all_kqblocked, int, 0444);
+MODULE_PARM_DESC(crypto_all_kqblocked, "Are all asym crypto queues blocked");
+
+#define	CRYPTO_Q_LOCK() \
+			({ \
+				spin_lock_irqsave(&crypto_q_lock, q_flags); \
+			 	dprintk("%s,%d: Q_LOCK()\n", __FILE__, __LINE__); \
+			 })
+#define	CRYPTO_Q_UNLOCK() \
+			({ \
+			 	dprintk("%s,%d: Q_UNLOCK()\n", __FILE__, __LINE__); \
+				spin_unlock_irqrestore(&crypto_q_lock, q_flags); \
+			 })
+
+/*
+ * There are two queues for processing completed crypto requests; one
+ * for the symmetric and one for the asymmetric ops.  We only need one
+ * but have two to avoid type futzing (cryptop vs. cryptkop).  A single
+ * mutex is used to lock access to both queues.  Note that this lock
+ * must be separate from the lock on request queues to insure driver
+ * callbacks don't generate lock order reversals.
+ */
+static LIST_HEAD(crp_ret_q);		/* callback queues */
+static LIST_HEAD(crp_ret_kq);
+
+static spinlock_t crypto_ret_q_lock;
+#define	CRYPTO_RETQ_LOCK() \
+			({ \
+				spin_lock_irqsave(&crypto_ret_q_lock, r_flags); \
+				dprintk("%s,%d: RETQ_LOCK\n", __FILE__, __LINE__); \
+			 })
+#define	CRYPTO_RETQ_UNLOCK() \
+			({ \
+			 	dprintk("%s,%d: RETQ_UNLOCK\n", __FILE__, __LINE__); \
+				spin_unlock_irqrestore(&crypto_ret_q_lock, r_flags); \
+			 })
+#define	CRYPTO_RETQ_EMPTY()	(list_empty(&crp_ret_q) && list_empty(&crp_ret_kq))
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
+static kmem_cache_t *cryptop_zone;
+static kmem_cache_t *cryptodesc_zone;
+#else
+static struct kmem_cache *cryptop_zone;
+static struct kmem_cache *cryptodesc_zone;
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
+#include <linux/sched.h>
+#define	kill_proc(p,s,v)	send_sig(s,find_task_by_vpid(p),0)
+#endif
+
+#define debug crypto_debug
+int crypto_debug = 0;
+module_param(crypto_debug, int, 0644);
+MODULE_PARM_DESC(crypto_debug, "Enable debug");
+EXPORT_SYMBOL(crypto_debug);
+
+/*
+ * Maximum number of outstanding crypto requests before we start
+ * failing requests.  We need this to prevent DOS when too many
+ * requests are arriving for us to keep up.  Otherwise we will
+ * run the system out of memory.  Since crypto is slow,  we are
+ * usually the bottleneck that needs to say, enough is enough.
+ *
+ * We cannot print errors when this condition occurs,  we are already too
+ * slow,  printing anything will just kill us
+ */
+
+static int crypto_q_cnt = 0;
+module_param(crypto_q_cnt, int, 0444);
+MODULE_PARM_DESC(crypto_q_cnt,
+		"Current number of outstanding crypto requests");
+
+static int crypto_q_max = 1000;
+module_param(crypto_q_max, int, 0644);
+MODULE_PARM_DESC(crypto_q_max,
+		"Maximum number of outstanding crypto requests");
+
+#define bootverbose crypto_verbose
+static int crypto_verbose = 0;
+module_param(crypto_verbose, int, 0644);
+MODULE_PARM_DESC(crypto_verbose,
+		"Enable verbose crypto startup");
+
+int	crypto_usercrypto = 1;	/* userland may do crypto reqs */
+module_param(crypto_usercrypto, int, 0644);
+MODULE_PARM_DESC(crypto_usercrypto,
+	   "Enable/disable user-mode access to crypto support");
+
+int	crypto_userasymcrypto = 1;	/* userland may do asym crypto reqs */
+module_param(crypto_userasymcrypto, int, 0644);
+MODULE_PARM_DESC(crypto_userasymcrypto,
+	   "Enable/disable user-mode access to asymmetric crypto support");
+
+int	crypto_devallowsoft = 0;	/* only use hardware crypto */
+module_param(crypto_devallowsoft, int, 0644);
+MODULE_PARM_DESC(crypto_devallowsoft,
+	   "Enable/disable use of software crypto support");
+
+/*
+ * This parameter controls the maximum number of crypto operations to 
+ * do consecutively in the crypto kernel thread before scheduling to allow 
+ * other processes to run. Without it, it is possible to get into a 
+ * situation where the crypto thread never allows any other processes to run.
+ * Default to 1000 which should be less than one second.
+ */
+static int crypto_max_loopcount = 1000;
+module_param(crypto_max_loopcount, int, 0644);
+MODULE_PARM_DESC(crypto_max_loopcount,
+	   "Maximum number of crypto ops to do before yielding to other processes");
+
+static pid_t	cryptoproc = (pid_t) -1;
+static struct	completion cryptoproc_exited;
+static DECLARE_WAIT_QUEUE_HEAD(cryptoproc_wait);
+static pid_t	cryptoretproc = (pid_t) -1;
+static struct	completion cryptoretproc_exited;
+static DECLARE_WAIT_QUEUE_HEAD(cryptoretproc_wait);
+
+static	int crypto_proc(void *arg);
+static	int crypto_ret_proc(void *arg);
+static	int crypto_invoke(struct cryptocap *cap, struct cryptop *crp, int hint);
+static	int crypto_kinvoke(struct cryptkop *krp, int flags);
+static	void crypto_exit(void);
+static  int crypto_init(void);
+
+static	struct cryptostats cryptostats;
+
+static struct cryptocap *
+crypto_checkdriver(u_int32_t hid)
+{
+	if (crypto_drivers == NULL)
+		return NULL;
+	return (hid >= crypto_drivers_num ? NULL : &crypto_drivers[hid]);
+}
+
+/*
+ * Compare a driver's list of supported algorithms against another
+ * list; return non-zero if all algorithms are supported.
+ */
+static int
+driver_suitable(const struct cryptocap *cap, const struct cryptoini *cri)
+{
+	const struct cryptoini *cr;
+
+	/* See if all the algorithms are supported. */
+	for (cr = cri; cr; cr = cr->cri_next)
+		if (cap->cc_alg[cr->cri_alg] == 0)
+			return 0;
+	return 1;
+}
+
+/*
+ * Select a driver for a new session that supports the specified
+ * algorithms and, optionally, is constrained according to the flags.
+ * The algorithm we use here is pretty stupid; just use the
+ * first driver that supports all the algorithms we need. If there
+ * are multiple drivers we choose the driver with the fewest active
+ * sessions.  We prefer hardware-backed drivers to software ones.
+ *
+ * XXX We need more smarts here (in real life too, but that's
+ * XXX another story altogether).
+ */
+static struct cryptocap *
+crypto_select_driver(const struct cryptoini *cri, int flags)
+{
+	struct cryptocap *cap, *best;
+	int match, hid;
+
+	CRYPTO_DRIVER_ASSERT();
+
+	/*
+	 * Look first for hardware crypto devices if permitted.
+	 */
+	if (flags & CRYPTOCAP_F_HARDWARE)
+		match = CRYPTOCAP_F_HARDWARE;
+	else
+		match = CRYPTOCAP_F_SOFTWARE;
+	best = NULL;
+again:
+	for (hid = 0; hid < crypto_drivers_num; hid++) {
+		cap = &crypto_drivers[hid];
+		/*
+		 * If it's not initialized, is in the process of
+		 * going away, or is not appropriate (hardware
+		 * or software based on match), then skip.
+		 */
+		if (cap->cc_dev == NULL ||
+		    (cap->cc_flags & CRYPTOCAP_F_CLEANUP) ||
+		    (cap->cc_flags & match) == 0)
+			continue;
+
+		/* verify all the algorithms are supported. */
+		if (driver_suitable(cap, cri)) {
+			if (best == NULL ||
+			    cap->cc_sessions < best->cc_sessions)
+				best = cap;
+		}
+	}
+	if (best != NULL)
+		return best;
+	if (match == CRYPTOCAP_F_HARDWARE && (flags & CRYPTOCAP_F_SOFTWARE)) {
+		/* sort of an Algol 68-style for loop */
+		match = CRYPTOCAP_F_SOFTWARE;
+		goto again;
+	}
+	return best;
+}
+
+/*
+ * Create a new session.  The crid argument specifies a crypto
+ * driver to use or constraints on a driver to select (hardware
+ * only, software only, either).  Whatever driver is selected
+ * must be capable of the requested crypto algorithms.
+ */
+int
+crypto_newsession(u_int64_t *sid, struct cryptoini *cri, int crid)
+{
+	struct cryptocap *cap;
+	u_int32_t hid, lid;
+	int err;
+	unsigned long d_flags;
+
+	CRYPTO_DRIVER_LOCK();
+	if ((crid & (CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SOFTWARE)) == 0) {
+		/*
+		 * Use specified driver; verify it is capable.
+		 */
+		cap = crypto_checkdriver(crid);
+		if (cap != NULL && !driver_suitable(cap, cri))
+			cap = NULL;
+	} else {
+		/*
+		 * No requested driver; select based on crid flags.
+		 */
+		cap = crypto_select_driver(cri, crid);
+		/*
+		 * if NULL then can't do everything in one session.
+		 * XXX Fix this. We need to inject a "virtual" session
+		 * XXX layer right about here.
+		 */
+	}
+	if (cap != NULL) {
+		/* Call the driver initialization routine. */
+		hid = cap - crypto_drivers;
+		lid = hid;		/* Pass the driver ID. */
+		cap->cc_sessions++;
+		CRYPTO_DRIVER_UNLOCK();
+		err = CRYPTODEV_NEWSESSION(cap->cc_dev, &lid, cri);
+		CRYPTO_DRIVER_LOCK();
+		if (err == 0) {
+			(*sid) = (cap->cc_flags & 0xff000000)
+			       | (hid & 0x00ffffff);
+			(*sid) <<= 32;
+			(*sid) |= (lid & 0xffffffff);
+		} else
+			cap->cc_sessions--;
+	} else
+		err = EINVAL;
+	CRYPTO_DRIVER_UNLOCK();
+	return err;
+}
+
+static void
+crypto_remove(struct cryptocap *cap)
+{
+	CRYPTO_DRIVER_ASSERT();
+	if (cap->cc_sessions == 0 && cap->cc_koperations == 0)
+		bzero(cap, sizeof(*cap));
+}
+
+/*
+ * Delete an existing session (or a reserved session on an unregistered
+ * driver).
+ */
+int
+crypto_freesession(u_int64_t sid)
+{
+	struct cryptocap *cap;
+	u_int32_t hid;
+	int err = 0;
+	unsigned long d_flags;
+
+	dprintk("%s()\n", __FUNCTION__);
+	CRYPTO_DRIVER_LOCK();
+
+	if (crypto_drivers == NULL) {
+		err = EINVAL;
+		goto done;
+	}
+
+	/* Determine two IDs. */
+	hid = CRYPTO_SESID2HID(sid);
+
+	if (hid >= crypto_drivers_num) {
+		dprintk("%s - INVALID DRIVER NUM %d\n", __FUNCTION__, hid);
+		err = ENOENT;
+		goto done;
+	}
+	cap = &crypto_drivers[hid];
+
+	if (cap->cc_dev) {
+		CRYPTO_DRIVER_UNLOCK();
+		/* Call the driver cleanup routine, if available, unlocked. */
+		err = CRYPTODEV_FREESESSION(cap->cc_dev, sid);
+		CRYPTO_DRIVER_LOCK();
+	}
+
+	if (cap->cc_sessions)
+		cap->cc_sessions--;
+
+	if (cap->cc_flags & CRYPTOCAP_F_CLEANUP)
+		crypto_remove(cap);
+
+done:
+	CRYPTO_DRIVER_UNLOCK();
+	return err;
+}
+
+/*
+ * Return an unused driver id.  Used by drivers prior to registering
+ * support for the algorithms they handle.
+ */
+int32_t
+crypto_get_driverid(device_t dev, int flags)
+{
+	struct cryptocap *newdrv;
+	int i;
+	unsigned long d_flags;
+
+	if ((flags & (CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SOFTWARE)) == 0) {
+		printf("%s: no flags specified when registering driver\n",
+		    device_get_nameunit(dev));
+		return -1;
+	}
+
+	CRYPTO_DRIVER_LOCK();
+
+	for (i = 0; i < crypto_drivers_num; i++) {
+		if (crypto_drivers[i].cc_dev == NULL &&
+		    (crypto_drivers[i].cc_flags & CRYPTOCAP_F_CLEANUP) == 0) {
+			break;
+		}
+	}
+
+	/* Out of entries, allocate some more. */
+	if (i == crypto_drivers_num) {
+		/* Be careful about wrap-around. */
+		if (2 * crypto_drivers_num <= crypto_drivers_num) {
+			CRYPTO_DRIVER_UNLOCK();
+			printk("crypto: driver count wraparound!\n");
+			return -1;
+		}
+
+		newdrv = kmalloc(2 * crypto_drivers_num * sizeof(struct cryptocap),
+				GFP_KERNEL);
+		if (newdrv == NULL) {
+			CRYPTO_DRIVER_UNLOCK();
+			printk("crypto: no space to expand driver table!\n");
+			return -1;
+		}
+
+		memcpy(newdrv, crypto_drivers,
+				crypto_drivers_num * sizeof(struct cryptocap));
+		memset(&newdrv[crypto_drivers_num], 0,
+				crypto_drivers_num * sizeof(struct cryptocap));
+
+		crypto_drivers_num *= 2;
+
+		kfree(crypto_drivers);
+		crypto_drivers = newdrv;
+	}
+
+	/* NB: state is zero'd on free */
+	crypto_drivers[i].cc_sessions = 1;	/* Mark */
+	crypto_drivers[i].cc_dev = dev;
+	crypto_drivers[i].cc_flags = flags;
+	if (bootverbose)
+		printf("crypto: assign %s driver id %u, flags %u\n",
+		    device_get_nameunit(dev), i, flags);
+
+	CRYPTO_DRIVER_UNLOCK();
+
+	return i;
+}
+
+/*
+ * Lookup a driver by name.  We match against the full device
+ * name and unit, and against just the name.  The latter gives
+ * us a simple widlcarding by device name.  On success return the
+ * driver/hardware identifier; otherwise return -1.
+ */
+int
+crypto_find_driver(const char *match)
+{
+	int i, len = strlen(match);
+	unsigned long d_flags;
+
+	CRYPTO_DRIVER_LOCK();
+	for (i = 0; i < crypto_drivers_num; i++) {
+		device_t dev = crypto_drivers[i].cc_dev;
+		if (dev == NULL ||
+		    (crypto_drivers[i].cc_flags & CRYPTOCAP_F_CLEANUP))
+			continue;
+		if (strncmp(match, device_get_nameunit(dev), len) == 0 ||
+		    strncmp(match, device_get_name(dev), len) == 0)
+			break;
+	}
+	CRYPTO_DRIVER_UNLOCK();
+	return i < crypto_drivers_num ? i : -1;
+}
+
+/*
+ * Return the device_t for the specified driver or NULL
+ * if the driver identifier is invalid.
+ */
+device_t
+crypto_find_device_byhid(int hid)
+{
+	struct cryptocap *cap = crypto_checkdriver(hid);
+	return cap != NULL ? cap->cc_dev : NULL;
+}
+
+/*
+ * Return the device/driver capabilities.
+ */
+int
+crypto_getcaps(int hid)
+{
+	struct cryptocap *cap = crypto_checkdriver(hid);
+	return cap != NULL ? cap->cc_flags : 0;
+}
+
+/*
+ * Register support for a key-related algorithm.  This routine
+ * is called once for each algorithm supported a driver.
+ */
+int
+crypto_kregister(u_int32_t driverid, int kalg, u_int32_t flags)
+{
+	struct cryptocap *cap;
+	int err;
+	unsigned long d_flags;
+
+	dprintk("%s()\n", __FUNCTION__);
+	CRYPTO_DRIVER_LOCK();
+
+	cap = crypto_checkdriver(driverid);
+	if (cap != NULL &&
+	    (CRK_ALGORITM_MIN <= kalg && kalg <= CRK_ALGORITHM_MAX)) {
+		/*
+		 * XXX Do some performance testing to determine placing.
+		 * XXX We probably need an auxiliary data structure that
+		 * XXX describes relative performances.
+		 */
+
+		cap->cc_kalg[kalg] = flags | CRYPTO_ALG_FLAG_SUPPORTED;
+		if (bootverbose)
+			printf("crypto: %s registers key alg %u flags %u\n"
+				, device_get_nameunit(cap->cc_dev)
+				, kalg
+				, flags
+			);
+		err = 0;
+	} else
+		err = EINVAL;
+
+	CRYPTO_DRIVER_UNLOCK();
+	return err;
+}
+
+/*
+ * Register support for a non-key-related algorithm.  This routine
+ * is called once for each such algorithm supported by a driver.
+ */
+int
+crypto_register(u_int32_t driverid, int alg, u_int16_t maxoplen,
+    u_int32_t flags)
+{
+	struct cryptocap *cap;
+	int err;
+	unsigned long d_flags;
+
+	dprintk("%s(id=0x%x, alg=%d, maxoplen=%d, flags=0x%x)\n", __FUNCTION__,
+			driverid, alg, maxoplen, flags);
+
+	CRYPTO_DRIVER_LOCK();
+
+	cap = crypto_checkdriver(driverid);
+	/* NB: algorithms are in the range [1..max] */
+	if (cap != NULL &&
+	    (CRYPTO_ALGORITHM_MIN <= alg && alg <= CRYPTO_ALGORITHM_MAX)) {
+		/*
+		 * XXX Do some performance testing to determine placing.
+		 * XXX We probably need an auxiliary data structure that
+		 * XXX describes relative performances.
+		 */
+
+		cap->cc_alg[alg] = flags | CRYPTO_ALG_FLAG_SUPPORTED;
+		cap->cc_max_op_len[alg] = maxoplen;
+		if (bootverbose)
+			printf("crypto: %s registers alg %u flags %u maxoplen %u\n"
+				, device_get_nameunit(cap->cc_dev)
+				, alg
+				, flags
+				, maxoplen
+			);
+		cap->cc_sessions = 0;		/* Unmark */
+		err = 0;
+	} else
+		err = EINVAL;
+
+	CRYPTO_DRIVER_UNLOCK();
+	return err;
+}
+
+static void
+driver_finis(struct cryptocap *cap)
+{
+	u_int32_t ses, kops;
+
+	CRYPTO_DRIVER_ASSERT();
+
+	ses = cap->cc_sessions;
+	kops = cap->cc_koperations;
+	bzero(cap, sizeof(*cap));
+	if (ses != 0 || kops != 0) {
+		/*
+		 * If there are pending sessions,
+		 * just mark as invalid.
+		 */
+		cap->cc_flags |= CRYPTOCAP_F_CLEANUP;
+		cap->cc_sessions = ses;
+		cap->cc_koperations = kops;
+	}
+}
+
+/*
+ * Unregister a crypto driver. If there are pending sessions using it,
+ * leave enough information around so that subsequent calls using those
+ * sessions will correctly detect the driver has been unregistered and
+ * reroute requests.
+ */
+int
+crypto_unregister(u_int32_t driverid, int alg)
+{
+	struct cryptocap *cap;
+	int i, err;
+	unsigned long d_flags;
+
+	dprintk("%s()\n", __FUNCTION__);
+	CRYPTO_DRIVER_LOCK();
+
+	cap = crypto_checkdriver(driverid);
+	if (cap != NULL &&
+	    (CRYPTO_ALGORITHM_MIN <= alg && alg <= CRYPTO_ALGORITHM_MAX) &&
+	    cap->cc_alg[alg] != 0) {
+		cap->cc_alg[alg] = 0;
+		cap->cc_max_op_len[alg] = 0;
+
+		/* Was this the last algorithm ? */
+		for (i = 1; i <= CRYPTO_ALGORITHM_MAX; i++)
+			if (cap->cc_alg[i] != 0)
+				break;
+
+		if (i == CRYPTO_ALGORITHM_MAX + 1)
+			driver_finis(cap);
+		err = 0;
+	} else
+		err = EINVAL;
+	CRYPTO_DRIVER_UNLOCK();
+	return err;
+}
+
+/*
+ * Unregister all algorithms associated with a crypto driver.
+ * If there are pending sessions using it, leave enough information
+ * around so that subsequent calls using those sessions will
+ * correctly detect the driver has been unregistered and reroute
+ * requests.
+ */
+int
+crypto_unregister_all(u_int32_t driverid)
+{
+	struct cryptocap *cap;
+	int err;
+	unsigned long d_flags;
+
+	dprintk("%s()\n", __FUNCTION__);
+	CRYPTO_DRIVER_LOCK();
+	cap = crypto_checkdriver(driverid);
+	if (cap != NULL) {
+		driver_finis(cap);
+		err = 0;
+	} else
+		err = EINVAL;
+	CRYPTO_DRIVER_UNLOCK();
+
+	return err;
+}
+
+/*
+ * Clear blockage on a driver.  The what parameter indicates whether
+ * the driver is now ready for cryptop's and/or cryptokop's.
+ */
+int
+crypto_unblock(u_int32_t driverid, int what)
+{
+	struct cryptocap *cap;
+	int err;
+	unsigned long q_flags;
+
+	CRYPTO_Q_LOCK();
+	cap = crypto_checkdriver(driverid);
+	if (cap != NULL) {
+		if (what & CRYPTO_SYMQ) {
+			cap->cc_qblocked = 0;
+			cap->cc_unqblocked = 0;
+			crypto_all_qblocked = 0;
+		}
+		if (what & CRYPTO_ASYMQ) {
+			cap->cc_kqblocked = 0;
+			cap->cc_unkqblocked = 0;
+			crypto_all_kqblocked = 0;
+		}
+		if (crp_sleep)
+			wake_up_interruptible(&cryptoproc_wait);
+		err = 0;
+	} else
+		err = EINVAL;
+	CRYPTO_Q_UNLOCK(); //DAVIDM should this be a driver lock
+
+	return err;
+}
+
+/*
+ * Add a crypto request to a queue, to be processed by the kernel thread.
+ */
+int
+crypto_dispatch(struct cryptop *crp)
+{
+	struct cryptocap *cap;
+	int result = -1;
+	unsigned long q_flags;
+
+	dprintk("%s()\n", __FUNCTION__);
+
+	cryptostats.cs_ops++;
+
+	CRYPTO_Q_LOCK();
+	if (crypto_q_cnt >= crypto_q_max) {
+		CRYPTO_Q_UNLOCK();
+		cryptostats.cs_drops++;
+		return ENOMEM;
+	}
+	crypto_q_cnt++;
+
+	/* make sure we are starting a fresh run on this crp. */
+	crp->crp_flags &= ~CRYPTO_F_DONE;
+	crp->crp_etype = 0;
+
+	/*
+	 * Caller marked the request to be processed immediately; dispatch
+	 * it directly to the driver unless the driver is currently blocked.
+	 */
+	if ((crp->crp_flags & CRYPTO_F_BATCH) == 0) {
+		int hid = CRYPTO_SESID2HID(crp->crp_sid);
+		cap = crypto_checkdriver(hid);
+		/* Driver cannot disappear when there is an active session. */
+		KASSERT(cap != NULL, ("%s: Driver disappeared.", __func__));
+		if (!cap->cc_qblocked) {
+			crypto_all_qblocked = 0;
+			crypto_drivers[hid].cc_unqblocked = 1;
+			CRYPTO_Q_UNLOCK();
+			result = crypto_invoke(cap, crp, 0);
+			CRYPTO_Q_LOCK();
+			if (result == ERESTART)
+				if (crypto_drivers[hid].cc_unqblocked)
+					crypto_drivers[hid].cc_qblocked = 1;
+			crypto_drivers[hid].cc_unqblocked = 0;
+		}
+	}
+	if (result == ERESTART) {
+		/*
+		 * The driver ran out of resources, mark the
+		 * driver ``blocked'' for cryptop's and put
+		 * the request back in the queue.  It would
+		 * best to put the request back where we got
+		 * it but that's hard so for now we put it
+		 * at the front.  This should be ok; putting
+		 * it at the end does not work.
+		 */
+		list_add(&crp->crp_next, &crp_q);
+		cryptostats.cs_blocks++;
+		result = 0;
+	} else if (result == -1) {
+		TAILQ_INSERT_TAIL(&crp_q, crp, crp_next);
+		result = 0;
+	}
+	if (crp_sleep)
+		wake_up_interruptible(&cryptoproc_wait);
+	CRYPTO_Q_UNLOCK();
+	return result;
+}
+
+/*
+ * Add an asymetric crypto request to a queue,
+ * to be processed by the kernel thread.
+ */
+int
+crypto_kdispatch(struct cryptkop *krp)
+{
+	int error;
+	unsigned long q_flags;
+
+	cryptostats.cs_kops++;
+
+	error = crypto_kinvoke(krp, krp->krp_crid);
+	if (error == ERESTART) {
+		CRYPTO_Q_LOCK();
+		TAILQ_INSERT_TAIL(&crp_kq, krp, krp_next);
+		if (crp_sleep)
+			wake_up_interruptible(&cryptoproc_wait);
+		CRYPTO_Q_UNLOCK();
+		error = 0;
+	}
+	return error;
+}
+
+/*
+ * Verify a driver is suitable for the specified operation.
+ */
+static __inline int
+kdriver_suitable(const struct cryptocap *cap, const struct cryptkop *krp)
+{
+	return (cap->cc_kalg[krp->krp_op] & CRYPTO_ALG_FLAG_SUPPORTED) != 0;
+}
+
+/*
+ * Select a driver for an asym operation.  The driver must
+ * support the necessary algorithm.  The caller can constrain
+ * which device is selected with the flags parameter.  The
+ * algorithm we use here is pretty stupid; just use the first
+ * driver that supports the algorithms we need. If there are
+ * multiple suitable drivers we choose the driver with the
+ * fewest active operations.  We prefer hardware-backed
+ * drivers to software ones when either may be used.
+ */
+static struct cryptocap *
+crypto_select_kdriver(const struct cryptkop *krp, int flags)
+{
+	struct cryptocap *cap, *best, *blocked;
+	int match, hid;
+
+	CRYPTO_DRIVER_ASSERT();
+
+	/*
+	 * Look first for hardware crypto devices if permitted.
+	 */
+	if (flags & CRYPTOCAP_F_HARDWARE)
+		match = CRYPTOCAP_F_HARDWARE;
+	else
+		match = CRYPTOCAP_F_SOFTWARE;
+	best = NULL;
+	blocked = NULL;
+again:
+	for (hid = 0; hid < crypto_drivers_num; hid++) {
+		cap = &crypto_drivers[hid];
+		/*
+		 * If it's not initialized, is in the process of
+		 * going away, or is not appropriate (hardware
+		 * or software based on match), then skip.
+		 */
+		if (cap->cc_dev == NULL ||
+		    (cap->cc_flags & CRYPTOCAP_F_CLEANUP) ||
+		    (cap->cc_flags & match) == 0)
+			continue;
+
+		/* verify all the algorithms are supported. */
+		if (kdriver_suitable(cap, krp)) {
+			if (best == NULL ||
+			    cap->cc_koperations < best->cc_koperations)
+				best = cap;
+		}
+	}
+	if (best != NULL)
+		return best;
+	if (match == CRYPTOCAP_F_HARDWARE && (flags & CRYPTOCAP_F_SOFTWARE)) {
+		/* sort of an Algol 68-style for loop */
+		match = CRYPTOCAP_F_SOFTWARE;
+		goto again;
+	}
+	return best;
+}
+
+/*
+ * Dispatch an assymetric crypto request.
+ */
+static int
+crypto_kinvoke(struct cryptkop *krp, int crid)
+{
+	struct cryptocap *cap = NULL;
+	int error;
+	unsigned long d_flags;
+
+	KASSERT(krp != NULL, ("%s: krp == NULL", __func__));
+	KASSERT(krp->krp_callback != NULL,
+	    ("%s: krp->crp_callback == NULL", __func__));
+
+	CRYPTO_DRIVER_LOCK();
+	if ((crid & (CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SOFTWARE)) == 0) {
+		cap = crypto_checkdriver(crid);
+		if (cap != NULL) {
+			/*
+			 * Driver present, it must support the necessary
+			 * algorithm and, if s/w drivers are excluded,
+			 * it must be registered as hardware-backed.
+			 */
+			if (!kdriver_suitable(cap, krp) ||
+			    (!crypto_devallowsoft &&
+			     (cap->cc_flags & CRYPTOCAP_F_HARDWARE) == 0))
+				cap = NULL;
+		}
+	} else {
+		/*
+		 * No requested driver; select based on crid flags.
+		 */
+		if (!crypto_devallowsoft)	/* NB: disallow s/w drivers */
+			crid &= ~CRYPTOCAP_F_SOFTWARE;
+		cap = crypto_select_kdriver(krp, crid);
+	}
+	if (cap != NULL && !cap->cc_kqblocked) {
+		krp->krp_hid = cap - crypto_drivers;
+		cap->cc_koperations++;
+		CRYPTO_DRIVER_UNLOCK();
+		error = CRYPTODEV_KPROCESS(cap->cc_dev, krp, 0);
+		CRYPTO_DRIVER_LOCK();
+		if (error == ERESTART) {
+			cap->cc_koperations--;
+			CRYPTO_DRIVER_UNLOCK();
+			return (error);
+		}
+		/* return the actual device used */
+		krp->krp_crid = krp->krp_hid;
+	} else {
+		/*
+		 * NB: cap is !NULL if device is blocked; in
+		 *     that case return ERESTART so the operation
+		 *     is resubmitted if possible.
+		 */
+		error = (cap == NULL) ? ENODEV : ERESTART;
+	}
+	CRYPTO_DRIVER_UNLOCK();
+
+	if (error) {
+		krp->krp_status = error;
+		crypto_kdone(krp);
+	}
+	return 0;
+}
+
+
+/*
+ * Dispatch a crypto request to the appropriate crypto devices.
+ */
+static int
+crypto_invoke(struct cryptocap *cap, struct cryptop *crp, int hint)
+{
+	KASSERT(crp != NULL, ("%s: crp == NULL", __func__));
+	KASSERT(crp->crp_callback != NULL,
+	    ("%s: crp->crp_callback == NULL", __func__));
+	KASSERT(crp->crp_desc != NULL, ("%s: crp->crp_desc == NULL", __func__));
+
+	dprintk("%s()\n", __FUNCTION__);
+
+#ifdef CRYPTO_TIMING
+	if (crypto_timing)
+		crypto_tstat(&cryptostats.cs_invoke, &crp->crp_tstamp);
+#endif
+	if (cap->cc_flags & CRYPTOCAP_F_CLEANUP) {
+		struct cryptodesc *crd;
+		u_int64_t nid;
+
+		/*
+		 * Driver has unregistered; migrate the session and return
+		 * an error to the caller so they'll resubmit the op.
+		 *
+		 * XXX: What if there are more already queued requests for this
+		 *      session?
+		 */
+		crypto_freesession(crp->crp_sid);
+
+		for (crd = crp->crp_desc; crd->crd_next; crd = crd->crd_next)
+			crd->CRD_INI.cri_next = &(crd->crd_next->CRD_INI);
+
+		/* XXX propagate flags from initial session? */
+		if (crypto_newsession(&nid, &(crp->crp_desc->CRD_INI),
+		    CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SOFTWARE) == 0)
+			crp->crp_sid = nid;
+
+		crp->crp_etype = EAGAIN;
+		crypto_done(crp);
+		return 0;
+	} else {
+		/*
+		 * Invoke the driver to process the request.
+		 */
+		return CRYPTODEV_PROCESS(cap->cc_dev, crp, hint);
+	}
+}
+
+/*
+ * Release a set of crypto descriptors.
+ */
+void
+crypto_freereq(struct cryptop *crp)
+{
+	struct cryptodesc *crd;
+
+	if (crp == NULL)
+		return;
+
+#ifdef DIAGNOSTIC
+	{
+		struct cryptop *crp2;
+		unsigned long q_flags;
+
+		CRYPTO_Q_LOCK();
+		TAILQ_FOREACH(crp2, &crp_q, crp_next) {
+			KASSERT(crp2 != crp,
+			    ("Freeing cryptop from the crypto queue (%p).",
+			    crp));
+		}
+		CRYPTO_Q_UNLOCK();
+		CRYPTO_RETQ_LOCK();
+		TAILQ_FOREACH(crp2, &crp_ret_q, crp_next) {
+			KASSERT(crp2 != crp,
+			    ("Freeing cryptop from the return queue (%p).",
+			    crp));
+		}
+		CRYPTO_RETQ_UNLOCK();
+	}
+#endif
+
+	while ((crd = crp->crp_desc) != NULL) {
+		crp->crp_desc = crd->crd_next;
+		kmem_cache_free(cryptodesc_zone, crd);
+	}
+	kmem_cache_free(cryptop_zone, crp);
+}
+
+/*
+ * Acquire a set of crypto descriptors.
+ */
+struct cryptop *
+crypto_getreq(int num)
+{
+	struct cryptodesc *crd;
+	struct cryptop *crp;
+
+	crp = kmem_cache_alloc(cryptop_zone, SLAB_ATOMIC);
+	if (crp != NULL) {
+		memset(crp, 0, sizeof(*crp));
+		INIT_LIST_HEAD(&crp->crp_next);
+		init_waitqueue_head(&crp->crp_waitq);
+		while (num--) {
+			crd = kmem_cache_alloc(cryptodesc_zone, SLAB_ATOMIC);
+			if (crd == NULL) {
+				crypto_freereq(crp);
+				return NULL;
+			}
+			memset(crd, 0, sizeof(*crd));
+			crd->crd_next = crp->crp_desc;
+			crp->crp_desc = crd;
+		}
+	}
+	return crp;
+}
+
+/*
+ * Invoke the callback on behalf of the driver.
+ */
+void
+crypto_done(struct cryptop *crp)
+{
+	unsigned long q_flags;
+
+	dprintk("%s()\n", __FUNCTION__);
+	if ((crp->crp_flags & CRYPTO_F_DONE) == 0) {
+		crp->crp_flags |= CRYPTO_F_DONE;
+		CRYPTO_Q_LOCK();
+		crypto_q_cnt--;
+		CRYPTO_Q_UNLOCK();
+	} else
+		printk("crypto: crypto_done op already done, flags 0x%x",
+				crp->crp_flags);
+	if (crp->crp_etype != 0)
+		cryptostats.cs_errs++;
+	/*
+	 * CBIMM means unconditionally do the callback immediately;
+	 * CBIFSYNC means do the callback immediately only if the
+	 * operation was done synchronously.  Both are used to avoid
+	 * doing extraneous context switches; the latter is mostly
+	 * used with the software crypto driver.
+	 */
+	if ((crp->crp_flags & CRYPTO_F_CBIMM) ||
+	    ((crp->crp_flags & CRYPTO_F_CBIFSYNC) &&
+	     (CRYPTO_SESID2CAPS(crp->crp_sid) & CRYPTOCAP_F_SYNC))) {
+		/*
+		 * Do the callback directly.  This is ok when the
+		 * callback routine does very little (e.g. the
+		 * /dev/crypto callback method just does a wakeup).
+		 */
+		crp->crp_callback(crp);
+	} else {
+		unsigned long r_flags;
+		/*
+		 * Normal case; queue the callback for the thread.
+		 */
+		CRYPTO_RETQ_LOCK();
+		if (CRYPTO_RETQ_EMPTY())
+			wake_up_interruptible(&cryptoretproc_wait);/* shared wait channel */
+		TAILQ_INSERT_TAIL(&crp_ret_q, crp, crp_next);
+		CRYPTO_RETQ_UNLOCK();
+	}
+}
+
+/*
+ * Invoke the callback on behalf of the driver.
+ */
+void
+crypto_kdone(struct cryptkop *krp)
+{
+	struct cryptocap *cap;
+	unsigned long d_flags;
+
+	if ((krp->krp_flags & CRYPTO_KF_DONE) != 0)
+		printk("crypto: crypto_kdone op already done, flags 0x%x",
+				krp->krp_flags);
+	krp->krp_flags |= CRYPTO_KF_DONE;
+	if (krp->krp_status != 0)
+		cryptostats.cs_kerrs++;
+
+	CRYPTO_DRIVER_LOCK();
+	/* XXX: What if driver is loaded in the meantime? */
+	if (krp->krp_hid < crypto_drivers_num) {
+		cap = &crypto_drivers[krp->krp_hid];
+		cap->cc_koperations--;
+		KASSERT(cap->cc_koperations >= 0, ("cc_koperations < 0"));
+		if (cap->cc_flags & CRYPTOCAP_F_CLEANUP)
+			crypto_remove(cap);
+	}
+	CRYPTO_DRIVER_UNLOCK();
+
+	/*
+	 * CBIMM means unconditionally do the callback immediately;
+	 * This is used to avoid doing extraneous context switches
+	 */
+	if ((krp->krp_flags & CRYPTO_KF_CBIMM)) {
+		/*
+		 * Do the callback directly.  This is ok when the
+		 * callback routine does very little (e.g. the
+		 * /dev/crypto callback method just does a wakeup).
+		 */
+		krp->krp_callback(krp);
+	} else {
+		unsigned long r_flags;
+		/*
+		 * Normal case; queue the callback for the thread.
+		 */
+		CRYPTO_RETQ_LOCK();
+		if (CRYPTO_RETQ_EMPTY())
+			wake_up_interruptible(&cryptoretproc_wait);/* shared wait channel */
+		TAILQ_INSERT_TAIL(&crp_ret_kq, krp, krp_next);
+		CRYPTO_RETQ_UNLOCK();
+	}
+}
+
+int
+crypto_getfeat(int *featp)
+{
+	int hid, kalg, feat = 0;
+	unsigned long d_flags;
+
+	CRYPTO_DRIVER_LOCK();
+	for (hid = 0; hid < crypto_drivers_num; hid++) {
+		const struct cryptocap *cap = &crypto_drivers[hid];
+
+		if ((cap->cc_flags & CRYPTOCAP_F_SOFTWARE) &&
+		    !crypto_devallowsoft) {
+			continue;
+		}
+		for (kalg = 0; kalg < CRK_ALGORITHM_MAX; kalg++)
+			if (cap->cc_kalg[kalg] & CRYPTO_ALG_FLAG_SUPPORTED)
+				feat |=  1 << kalg;
+	}
+	CRYPTO_DRIVER_UNLOCK();
+	*featp = feat;
+	return (0);
+}
+
+/*
+ * Crypto thread, dispatches crypto requests.
+ */
+static int
+crypto_proc(void *arg)
+{
+	struct cryptop *crp, *submit;
+	struct cryptkop *krp, *krpp;
+	struct cryptocap *cap;
+	u_int32_t hid;
+	int result, hint;
+	unsigned long q_flags;
+	int loopcount = 0;
+
+	ocf_daemonize("crypto");
+
+	CRYPTO_Q_LOCK();
+	for (;;) {
+		/*
+		 * we need to make sure we don't get into a busy loop with nothing
+		 * to do,  the two crypto_all_*blocked vars help us find out when
+		 * we are all full and can do nothing on any driver or Q.  If so we
+		 * wait for an unblock.
+		 */
+		crypto_all_qblocked  = !list_empty(&crp_q);
+
+		/*
+		 * Find the first element in the queue that can be
+		 * processed and look-ahead to see if multiple ops
+		 * are ready for the same driver.
+		 */
+		submit = NULL;
+		hint = 0;
+		list_for_each_entry(crp, &crp_q, crp_next) {
+			hid = CRYPTO_SESID2HID(crp->crp_sid);
+			cap = crypto_checkdriver(hid);
+			/*
+			 * Driver cannot disappear when there is an active
+			 * session.
+			 */
+			KASSERT(cap != NULL, ("%s:%u Driver disappeared.",
+			    __func__, __LINE__));
+			if (cap == NULL || cap->cc_dev == NULL) {
+				/* Op needs to be migrated, process it. */
+				if (submit == NULL)
+					submit = crp;
+				break;
+			}
+			if (!cap->cc_qblocked) {
+				if (submit != NULL) {
+					/*
+					 * We stop on finding another op,
+					 * regardless whether its for the same
+					 * driver or not.  We could keep
+					 * searching the queue but it might be
+					 * better to just use a per-driver
+					 * queue instead.
+					 */
+					if (CRYPTO_SESID2HID(submit->crp_sid) == hid)
+						hint = CRYPTO_HINT_MORE;
+					break;
+				} else {
+					submit = crp;
+					if ((submit->crp_flags & CRYPTO_F_BATCH) == 0)
+						break;
+					/* keep scanning for more are q'd */
+				}
+			}
+		}
+		if (submit != NULL) {
+			hid = CRYPTO_SESID2HID(submit->crp_sid);
+			crypto_all_qblocked = 0;
+			list_del(&submit->crp_next);
+			crypto_drivers[hid].cc_unqblocked = 1;
+			cap = crypto_checkdriver(hid);
+			CRYPTO_Q_UNLOCK();
+			KASSERT(cap != NULL, ("%s:%u Driver disappeared.",
+			    __func__, __LINE__));
+			result = crypto_invoke(cap, submit, hint);
+			CRYPTO_Q_LOCK();
+			if (result == ERESTART) {
+				/*
+				 * The driver ran out of resources, mark the
+				 * driver ``blocked'' for cryptop's and put
+				 * the request back in the queue.  It would
+				 * best to put the request back where we got
+				 * it but that's hard so for now we put it
+				 * at the front.  This should be ok; putting
+				 * it at the end does not work.
+				 */
+				/* XXX validate sid again? */
+				list_add(&submit->crp_next, &crp_q);
+				cryptostats.cs_blocks++;
+				if (crypto_drivers[hid].cc_unqblocked)
+					crypto_drivers[hid].cc_qblocked=0;
+				crypto_drivers[hid].cc_unqblocked=0;
+			}
+			crypto_drivers[hid].cc_unqblocked = 0;
+		}
+
+		crypto_all_kqblocked = !list_empty(&crp_kq);
+
+		/* As above, but for key ops */
+		krp = NULL;
+		list_for_each_entry(krpp, &crp_kq, krp_next) {
+			cap = crypto_checkdriver(krpp->krp_hid);
+			if (cap == NULL || cap->cc_dev == NULL) {
+				/*
+				 * Operation needs to be migrated, invalidate
+				 * the assigned device so it will reselect a
+				 * new one below.  Propagate the original
+				 * crid selection flags if supplied.
+				 */
+				krp->krp_hid = krp->krp_crid &
+				    (CRYPTOCAP_F_SOFTWARE|CRYPTOCAP_F_HARDWARE);
+				if (krp->krp_hid == 0)
+					krp->krp_hid =
+				    CRYPTOCAP_F_SOFTWARE|CRYPTOCAP_F_HARDWARE;
+				break;
+			}
+			if (!cap->cc_kqblocked) {
+				krp = krpp;
+				break;
+			}
+		}
+		if (krp != NULL) {
+			crypto_all_kqblocked = 0;
+			list_del(&krp->krp_next);
+			crypto_drivers[krp->krp_hid].cc_kqblocked = 1;
+			CRYPTO_Q_UNLOCK();
+			result = crypto_kinvoke(krp, krp->krp_hid);
+			CRYPTO_Q_LOCK();
+			if (result == ERESTART) {
+				/*
+				 * The driver ran out of resources, mark the
+				 * driver ``blocked'' for cryptkop's and put
+				 * the request back in the queue.  It would
+				 * best to put the request back where we got
+				 * it but that's hard so for now we put it
+				 * at the front.  This should be ok; putting
+				 * it at the end does not work.
+				 */
+				/* XXX validate sid again? */
+				list_add(&krp->krp_next, &crp_kq);
+				cryptostats.cs_kblocks++;
+			} else
+				crypto_drivers[krp->krp_hid].cc_kqblocked = 0;
+		}
+
+		if (submit == NULL && krp == NULL) {
+			/*
+			 * Nothing more to be processed.  Sleep until we're
+			 * woken because there are more ops to process.
+			 * This happens either by submission or by a driver
+			 * becoming unblocked and notifying us through
+			 * crypto_unblock.  Note that when we wakeup we
+			 * start processing each queue again from the
+			 * front. It's not clear that it's important to
+			 * preserve this ordering since ops may finish
+			 * out of order if dispatched to different devices
+			 * and some become blocked while others do not.
+			 */
+			dprintk("%s - sleeping (qe=%d qb=%d kqe=%d kqb=%d)\n",
+					__FUNCTION__,
+					list_empty(&crp_q), crypto_all_qblocked,
+					list_empty(&crp_kq), crypto_all_kqblocked);
+			loopcount = 0;
+			CRYPTO_Q_UNLOCK();
+			crp_sleep = 1;
+			wait_event_interruptible(cryptoproc_wait,
+					!(list_empty(&crp_q) || crypto_all_qblocked) ||
+					!(list_empty(&crp_kq) || crypto_all_kqblocked) ||
+					cryptoproc == (pid_t) -1);
+			crp_sleep = 0;
+			if (signal_pending (current)) {
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
+				spin_lock_irq(&current->sigmask_lock);
+#endif
+				flush_signals(current);
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
+				spin_unlock_irq(&current->sigmask_lock);
+#endif
+			}
+			CRYPTO_Q_LOCK();
+			dprintk("%s - awake\n", __FUNCTION__);
+			if (cryptoproc == (pid_t) -1)
+				break;
+			cryptostats.cs_intrs++;
+		} else if (loopcount > crypto_max_loopcount) {
+			/*
+			 * Give other processes a chance to run if we've 
+			 * been using the CPU exclusively for a while.
+			 */
+			loopcount = 0;
+			schedule();
+		}
+		loopcount++;
+	}
+	CRYPTO_Q_UNLOCK();
+	complete_and_exit(&cryptoproc_exited, 0);
+}
+
+/*
+ * Crypto returns thread, does callbacks for processed crypto requests.
+ * Callbacks are done here, rather than in the crypto drivers, because
+ * callbacks typically are expensive and would slow interrupt handling.
+ */
+static int
+crypto_ret_proc(void *arg)
+{
+	struct cryptop *crpt;
+	struct cryptkop *krpt;
+	unsigned long  r_flags;
+
+	ocf_daemonize("crypto_ret");
+
+	CRYPTO_RETQ_LOCK();
+	for (;;) {
+		/* Harvest return q's for completed ops */
+		crpt = NULL;
+		if (!list_empty(&crp_ret_q))
+			crpt = list_entry(crp_ret_q.next, typeof(*crpt), crp_next);
+		if (crpt != NULL)
+			list_del(&crpt->crp_next);
+
+		krpt = NULL;
+		if (!list_empty(&crp_ret_kq))
+			krpt = list_entry(crp_ret_kq.next, typeof(*krpt), krp_next);
+		if (krpt != NULL)
+			list_del(&krpt->krp_next);
+
+		if (crpt != NULL || krpt != NULL) {
+			CRYPTO_RETQ_UNLOCK();
+			/*
+			 * Run callbacks unlocked.
+			 */
+			if (crpt != NULL)
+				crpt->crp_callback(crpt);
+			if (krpt != NULL)
+				krpt->krp_callback(krpt);
+			CRYPTO_RETQ_LOCK();
+		} else {
+			/*
+			 * Nothing more to be processed.  Sleep until we're
+			 * woken because there are more returns to process.
+			 */
+			dprintk("%s - sleeping\n", __FUNCTION__);
+			CRYPTO_RETQ_UNLOCK();
+			wait_event_interruptible(cryptoretproc_wait,
+					cryptoretproc == (pid_t) -1 ||
+					!list_empty(&crp_ret_q) ||
+					!list_empty(&crp_ret_kq));
+			if (signal_pending (current)) {
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
+				spin_lock_irq(&current->sigmask_lock);
+#endif
+				flush_signals(current);
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
+				spin_unlock_irq(&current->sigmask_lock);
+#endif
+			}
+			CRYPTO_RETQ_LOCK();
+			dprintk("%s - awake\n", __FUNCTION__);
+			if (cryptoretproc == (pid_t) -1) {
+				dprintk("%s - EXITING!\n", __FUNCTION__);
+				break;
+			}
+			cryptostats.cs_rets++;
+		}
+	}
+	CRYPTO_RETQ_UNLOCK();
+	complete_and_exit(&cryptoretproc_exited, 0);
+}
+
+
+#if 0 /* should put this into /proc or something */
+static void
+db_show_drivers(void)
+{
+	int hid;
+
+	db_printf("%12s %4s %4s %8s %2s %2s\n"
+		, "Device"
+		, "Ses"
+		, "Kops"
+		, "Flags"
+		, "QB"
+		, "KB"
+	);
+	for (hid = 0; hid < crypto_drivers_num; hid++) {
+		const struct cryptocap *cap = &crypto_drivers[hid];
+		if (cap->cc_dev == NULL)
+			continue;
+		db_printf("%-12s %4u %4u %08x %2u %2u\n"
+		    , device_get_nameunit(cap->cc_dev)
+		    , cap->cc_sessions
+		    , cap->cc_koperations
+		    , cap->cc_flags
+		    , cap->cc_qblocked
+		    , cap->cc_kqblocked
+		);
+	}
+}
+
+DB_SHOW_COMMAND(crypto, db_show_crypto)
+{
+	struct cryptop *crp;
+
+	db_show_drivers();
+	db_printf("\n");
+
+	db_printf("%4s %8s %4s %4s %4s %4s %8s %8s\n",
+	    "HID", "Caps", "Ilen", "Olen", "Etype", "Flags",
+	    "Desc", "Callback");
+	TAILQ_FOREACH(crp, &crp_q, crp_next) {
+		db_printf("%4u %08x %4u %4u %4u %04x %8p %8p\n"
+		    , (int) CRYPTO_SESID2HID(crp->crp_sid)
+		    , (int) CRYPTO_SESID2CAPS(crp->crp_sid)
+		    , crp->crp_ilen, crp->crp_olen
+		    , crp->crp_etype
+		    , crp->crp_flags
+		    , crp->crp_desc
+		    , crp->crp_callback
+		);
+	}
+	if (!TAILQ_EMPTY(&crp_ret_q)) {
+		db_printf("\n%4s %4s %4s %8s\n",
+		    "HID", "Etype", "Flags", "Callback");
+		TAILQ_FOREACH(crp, &crp_ret_q, crp_next) {
+			db_printf("%4u %4u %04x %8p\n"
+			    , (int) CRYPTO_SESID2HID(crp->crp_sid)
+			    , crp->crp_etype
+			    , crp->crp_flags
+			    , crp->crp_callback
+			);
+		}
+	}
+}
+
+DB_SHOW_COMMAND(kcrypto, db_show_kcrypto)
+{
+	struct cryptkop *krp;
+
+	db_show_drivers();
+	db_printf("\n");
+
+	db_printf("%4s %5s %4s %4s %8s %4s %8s\n",
+	    "Op", "Status", "#IP", "#OP", "CRID", "HID", "Callback");
+	TAILQ_FOREACH(krp, &crp_kq, krp_next) {
+		db_printf("%4u %5u %4u %4u %08x %4u %8p\n"
+		    , krp->krp_op
+		    , krp->krp_status
+		    , krp->krp_iparams, krp->krp_oparams
+		    , krp->krp_crid, krp->krp_hid
+		    , krp->krp_callback
+		);
+	}
+	if (!TAILQ_EMPTY(&crp_ret_q)) {
+		db_printf("%4s %5s %8s %4s %8s\n",
+		    "Op", "Status", "CRID", "HID", "Callback");
+		TAILQ_FOREACH(krp, &crp_ret_kq, krp_next) {
+			db_printf("%4u %5u %08x %4u %8p\n"
+			    , krp->krp_op
+			    , krp->krp_status
+			    , krp->krp_crid, krp->krp_hid
+			    , krp->krp_callback
+			);
+		}
+	}
+}
+#endif
+
+
+static int
+crypto_init(void)
+{
+	int error;
+
+	dprintk("%s(%p)\n", __FUNCTION__, (void *) crypto_init);
+
+	if (crypto_initted)
+		return 0;
+	crypto_initted = 1;
+
+	spin_lock_init(&crypto_drivers_lock);
+	spin_lock_init(&crypto_q_lock);
+	spin_lock_init(&crypto_ret_q_lock);
+
+	cryptop_zone = kmem_cache_create("cryptop", sizeof(struct cryptop),
+				       0, SLAB_HWCACHE_ALIGN, NULL
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)
+				       , NULL
+#endif
+					);
+
+	cryptodesc_zone = kmem_cache_create("cryptodesc", sizeof(struct cryptodesc),
+				       0, SLAB_HWCACHE_ALIGN, NULL
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)
+				       , NULL
+#endif
+					);
+
+	if (cryptodesc_zone == NULL || cryptop_zone == NULL) {
+		printk("crypto: crypto_init cannot setup crypto zones\n");
+		error = ENOMEM;
+		goto bad;
+	}
+
+	crypto_drivers_num = CRYPTO_DRIVERS_INITIAL;
+	crypto_drivers = kmalloc(crypto_drivers_num * sizeof(struct cryptocap),
+			GFP_KERNEL);
+	if (crypto_drivers == NULL) {
+		printk("crypto: crypto_init cannot setup crypto drivers\n");
+		error = ENOMEM;
+		goto bad;
+	}
+
+	memset(crypto_drivers, 0, crypto_drivers_num * sizeof(struct cryptocap));
+
+	init_completion(&cryptoproc_exited);
+	init_completion(&cryptoretproc_exited);
+
+	cryptoproc = 0; /* to avoid race condition where proc runs first */
+	cryptoproc = kernel_thread(crypto_proc, NULL, CLONE_FS|CLONE_FILES);
+	if (cryptoproc < 0) {
+		error = cryptoproc;
+		printk("crypto: crypto_init cannot start crypto thread; error %d",
+			error);
+		goto bad;
+	}
+
+	cryptoretproc = 0; /* to avoid race condition where proc runs first */
+	cryptoretproc = kernel_thread(crypto_ret_proc, NULL, CLONE_FS|CLONE_FILES);
+	if (cryptoretproc < 0) {
+		error = cryptoretproc;
+		printk("crypto: crypto_init cannot start cryptoret thread; error %d",
+				error);
+		goto bad;
+	}
+
+	return 0;
+bad:
+	crypto_exit();
+	return error;
+}
+
+
+static void
+crypto_exit(void)
+{
+	pid_t p;
+	unsigned long d_flags;
+
+	dprintk("%s()\n", __FUNCTION__);
+
+	/*
+	 * Terminate any crypto threads.
+	 */
+
+	CRYPTO_DRIVER_LOCK();
+	p = cryptoproc;
+	cryptoproc = (pid_t) -1;
+	kill_proc(p, SIGTERM, 1);
+	wake_up_interruptible(&cryptoproc_wait);
+	CRYPTO_DRIVER_UNLOCK();
+
+	wait_for_completion(&cryptoproc_exited);
+
+	CRYPTO_DRIVER_LOCK();
+	p = cryptoretproc;
+	cryptoretproc = (pid_t) -1;
+	kill_proc(p, SIGTERM, 1);
+	wake_up_interruptible(&cryptoretproc_wait);
+	CRYPTO_DRIVER_UNLOCK();
+
+	wait_for_completion(&cryptoretproc_exited);
+
+	/* XXX flush queues??? */
+
+	/* 
+	 * Reclaim dynamically allocated resources.
+	 */
+	if (crypto_drivers != NULL)
+		kfree(crypto_drivers);
+
+	if (cryptodesc_zone != NULL)
+		kmem_cache_destroy(cryptodesc_zone);
+	if (cryptop_zone != NULL)
+		kmem_cache_destroy(cryptop_zone);
+}
+
+
+EXPORT_SYMBOL(crypto_newsession);
+EXPORT_SYMBOL(crypto_freesession);
+EXPORT_SYMBOL(crypto_get_driverid);
+EXPORT_SYMBOL(crypto_kregister);
+EXPORT_SYMBOL(crypto_register);
+EXPORT_SYMBOL(crypto_unregister);
+EXPORT_SYMBOL(crypto_unregister_all);
+EXPORT_SYMBOL(crypto_unblock);
+EXPORT_SYMBOL(crypto_dispatch);
+EXPORT_SYMBOL(crypto_kdispatch);
+EXPORT_SYMBOL(crypto_freereq);
+EXPORT_SYMBOL(crypto_getreq);
+EXPORT_SYMBOL(crypto_done);
+EXPORT_SYMBOL(crypto_kdone);
+EXPORT_SYMBOL(crypto_getfeat);
+EXPORT_SYMBOL(crypto_userasymcrypto);
+EXPORT_SYMBOL(crypto_getcaps);
+EXPORT_SYMBOL(crypto_find_driver);
+EXPORT_SYMBOL(crypto_find_device_byhid);
+
+module_init(crypto_init);
+module_exit(crypto_exit);
+
+MODULE_LICENSE("BSD");
+MODULE_AUTHOR("David McCullough <david_mccullough@mcafee.com>");
+MODULE_DESCRIPTION("OCF (OpenBSD Cryptographic Framework)");
diff --git a/target/linux/generic/files/crypto/ocf/cryptocteon/Makefile b/target/linux/generic/files/crypto/ocf/cryptocteon/Makefile
new file mode 100644
index 0000000000..eeed0d6411
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/cryptocteon/Makefile
@@ -0,0 +1,17 @@
+# for SGlinux builds
+-include $(ROOTDIR)/modules/.config
+
+obj-$(CONFIG_OCF_CRYPTOCTEON) += cryptocteon.o
+
+obj ?= .
+EXTRA_CFLAGS += -I$(obj)/.. -I$(obj)/
+
+ifdef CONFIG_OCF_CRYPTOCTEON
+# you need the cavium crypto component installed
+EXTRA_CFLAGS += -I$(ROOTDIR)/prop/include
+endif
+
+ifdef TOPDIR
+-include $(TOPDIR)/Rules.make
+endif
+
diff --git a/target/linux/generic/files/crypto/ocf/cryptocteon/cavium_crypto.c b/target/linux/generic/files/crypto/ocf/cryptocteon/cavium_crypto.c
new file mode 100644
index 0000000000..ceaf77c5c8
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/cryptocteon/cavium_crypto.c
@@ -0,0 +1,2283 @@
+/*
+ * Copyright (c) 2009 David McCullough <david.mccullough@securecomputing.com>
+ *
+ * Copyright (c) 2003-2007 Cavium Networks (support@cavium.com). All rights
+ * reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by Cavium Networks
+ * 4. Cavium Networks' name may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ * 
+ * This Software, including technical data, may be subject to U.S. export
+ * control laws, including the U.S. Export Administration Act and its
+ * associated regulations, and may be subject to export or import regulations
+ * in other countries. You warrant that You will comply strictly in all
+ * respects with all such regulations and acknowledge that you have the
+ * responsibility to obtain licenses to export, re-export or import the
+ * Software.
+ * 
+ * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS" AND
+ * WITH ALL FAULTS AND CAVIUM MAKES NO PROMISES, REPRESENTATIONS OR WARRANTIES,
+ * EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO THE
+ * SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
+ * DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
+ * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
+ * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
+ * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
+ * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
+ * PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
+*/
+/****************************************************************************/
+
+#include <linux/scatterlist.h>
+#include <asm/octeon/octeon.h>
+#include "octeon-asm.h"
+
+/****************************************************************************/
+
+extern unsigned long octeon_crypto_enable(struct octeon_cop2_state *);
+extern void octeon_crypto_disable(struct octeon_cop2_state *, unsigned long);
+
+#define SG_INIT(s, p, i, l) \
+	{ \
+	    (i) = 0; \
+	    (l) = (s)[0].length; \
+	    (p) = (typeof(p)) sg_virt((s)); \
+		CVMX_PREFETCH0((p)); \
+	}
+
+#define SG_CONSUME(s, p, i, l) \
+	{ \
+		(p)++; \
+		(l) -= sizeof(*(p)); \
+		if ((l) < 0) { \
+			dprintk("%s, %d: l = %d\n", __FILE__, __LINE__, l); \
+		} else if ((l) == 0) { \
+		    (i)++; \
+		    (l) = (s)[0].length; \
+		    (p) = (typeof(p)) sg_virt(s); \
+			CVMX_PREFETCH0((p)); \
+		} \
+	}
+
+#define ESP_HEADER_LENGTH     8
+#define DES_CBC_IV_LENGTH     8
+#define AES_CBC_IV_LENGTH     16
+#define ESP_HMAC_LEN          12
+
+#define ESP_HEADER_LENGTH 8
+#define DES_CBC_IV_LENGTH 8
+
+/****************************************************************************/
+
+#define CVM_LOAD_SHA_UNIT(dat, next)  { \
+   if (next == 0) {                     \
+      next = 1;                         \
+      CVMX_MT_HSH_DAT (dat, 0);         \
+   } else if (next == 1) {              \
+      next = 2;                         \
+      CVMX_MT_HSH_DAT (dat, 1);         \
+   } else if (next == 2) {              \
+      next = 3;                    \
+      CVMX_MT_HSH_DAT (dat, 2);         \
+   } else if (next == 3) {              \
+      next = 4;                         \
+      CVMX_MT_HSH_DAT (dat, 3);         \
+   } else if (next == 4) {              \
+      next = 5;                           \
+      CVMX_MT_HSH_DAT (dat, 4);         \
+   } else if (next == 5) {              \
+      next = 6;                         \
+      CVMX_MT_HSH_DAT (dat, 5);         \
+   } else if (next == 6) {              \
+      next = 7;                         \
+      CVMX_MT_HSH_DAT (dat, 6);         \
+   } else {                             \
+     CVMX_MT_HSH_STARTSHA (dat);        \
+     next = 0;                          \
+   }                                    \
+}
+
+#define CVM_LOAD2_SHA_UNIT(dat1, dat2, next)  { \
+   if (next == 0) {                      \
+      CVMX_MT_HSH_DAT (dat1, 0);         \
+      CVMX_MT_HSH_DAT (dat2, 1);         \
+      next = 2;                          \
+   } else if (next == 1) {               \
+      CVMX_MT_HSH_DAT (dat1, 1);         \
+      CVMX_MT_HSH_DAT (dat2, 2);         \
+      next = 3;                          \
+   } else if (next == 2) {               \
+      CVMX_MT_HSH_DAT (dat1, 2);         \
+      CVMX_MT_HSH_DAT (dat2, 3);         \
+      next = 4;                          \
+   } else if (next == 3) {               \
+      CVMX_MT_HSH_DAT (dat1, 3);         \
+      CVMX_MT_HSH_DAT (dat2, 4);         \
+      next = 5;                          \
+   } else if (next == 4) {               \
+      CVMX_MT_HSH_DAT (dat1, 4);         \
+      CVMX_MT_HSH_DAT (dat2, 5);         \
+      next = 6;                          \
+   } else if (next == 5) {               \
+      CVMX_MT_HSH_DAT (dat1, 5);         \
+      CVMX_MT_HSH_DAT (dat2, 6);         \
+      next = 7;                          \
+   } else if (next == 6) {               \
+      CVMX_MT_HSH_DAT (dat1, 6);         \
+      CVMX_MT_HSH_STARTSHA (dat2);       \
+      next = 0;                          \
+   } else {                              \
+     CVMX_MT_HSH_STARTSHA (dat1);        \
+     CVMX_MT_HSH_DAT (dat2, 0);          \
+     next = 1;                           \
+   }                                     \
+}
+
+/****************************************************************************/
+
+#define CVM_LOAD_MD5_UNIT(dat, next)  { \
+   if (next == 0) {                     \
+      next = 1;                         \
+      CVMX_MT_HSH_DAT (dat, 0);         \
+   } else if (next == 1) {              \
+      next = 2;                         \
+      CVMX_MT_HSH_DAT (dat, 1);         \
+   } else if (next == 2) {              \
+      next = 3;                    \
+      CVMX_MT_HSH_DAT (dat, 2);         \
+   } else if (next == 3) {              \
+      next = 4;                         \
+      CVMX_MT_HSH_DAT (dat, 3);         \
+   } else if (next == 4) {              \
+      next = 5;                           \
+      CVMX_MT_HSH_DAT (dat, 4);         \
+   } else if (next == 5) {              \
+      next = 6;                         \
+      CVMX_MT_HSH_DAT (dat, 5);         \
+   } else if (next == 6) {              \
+      next = 7;                         \
+      CVMX_MT_HSH_DAT (dat, 6);         \
+   } else {                             \
+     CVMX_MT_HSH_STARTMD5 (dat);        \
+     next = 0;                          \
+   }                                    \
+}
+
+#define CVM_LOAD2_MD5_UNIT(dat1, dat2, next)  { \
+   if (next == 0) {                      \
+      CVMX_MT_HSH_DAT (dat1, 0);         \
+      CVMX_MT_HSH_DAT (dat2, 1);         \
+      next = 2;                          \
+   } else if (next == 1) {               \
+      CVMX_MT_HSH_DAT (dat1, 1);         \
+      CVMX_MT_HSH_DAT (dat2, 2);         \
+      next = 3;                          \
+   } else if (next == 2) {               \
+      CVMX_MT_HSH_DAT (dat1, 2);         \
+      CVMX_MT_HSH_DAT (dat2, 3);         \
+      next = 4;                          \
+   } else if (next == 3) {               \
+      CVMX_MT_HSH_DAT (dat1, 3);         \
+      CVMX_MT_HSH_DAT (dat2, 4);         \
+      next = 5;                          \
+   } else if (next == 4) {               \
+      CVMX_MT_HSH_DAT (dat1, 4);         \
+      CVMX_MT_HSH_DAT (dat2, 5);         \
+      next = 6;                          \
+   } else if (next == 5) {               \
+      CVMX_MT_HSH_DAT (dat1, 5);         \
+      CVMX_MT_HSH_DAT (dat2, 6);         \
+      next = 7;                          \
+   } else if (next == 6) {               \
+      CVMX_MT_HSH_DAT (dat1, 6);         \
+      CVMX_MT_HSH_STARTMD5 (dat2);       \
+      next = 0;                          \
+   } else {                              \
+     CVMX_MT_HSH_STARTMD5 (dat1);        \
+     CVMX_MT_HSH_DAT (dat2, 0);          \
+     next = 1;                           \
+   }                                     \
+}
+
+/****************************************************************************/
+
+static inline uint64_t
+swap64(uint64_t a)
+{
+    return ((a >> 56) |
+       (((a >> 48) & 0xfful) << 8) |
+       (((a >> 40) & 0xfful) << 16) |
+       (((a >> 32) & 0xfful) << 24) |
+       (((a >> 24) & 0xfful) << 32) |
+       (((a >> 16) & 0xfful) << 40) |
+       (((a >> 8) & 0xfful) << 48) | (((a >> 0) & 0xfful) << 56));
+}
+
+/****************************************************************************/
+
+void
+octo_calc_hash(__u8 auth, unsigned char *key, uint64_t *inner, uint64_t *outer)
+{
+    uint8_t hash_key[64];
+    uint64_t *key1;
+    register uint64_t xor1 = 0x3636363636363636ULL;
+    register uint64_t xor2 = 0x5c5c5c5c5c5c5c5cULL;
+    struct octeon_cop2_state state;
+    unsigned long flags;
+
+    dprintk("%s()\n", __FUNCTION__);
+
+    memset(hash_key, 0, sizeof(hash_key));
+    memcpy(hash_key, (uint8_t *) key, (auth ? 20 : 16));
+    key1 = (uint64_t *) hash_key;
+    flags = octeon_crypto_enable(&state);
+    if (auth) {
+       CVMX_MT_HSH_IV(0x67452301EFCDAB89ULL, 0);
+       CVMX_MT_HSH_IV(0x98BADCFE10325476ULL, 1);
+       CVMX_MT_HSH_IV(0xC3D2E1F000000000ULL, 2);
+    } else {
+       CVMX_MT_HSH_IV(0x0123456789ABCDEFULL, 0);
+       CVMX_MT_HSH_IV(0xFEDCBA9876543210ULL, 1);
+    }
+
+    CVMX_MT_HSH_DAT((*key1 ^ xor1), 0);
+    key1++;
+    CVMX_MT_HSH_DAT((*key1 ^ xor1), 1);
+    key1++;
+    CVMX_MT_HSH_DAT((*key1 ^ xor1), 2);
+    key1++;
+    CVMX_MT_HSH_DAT((*key1 ^ xor1), 3);
+    key1++;
+    CVMX_MT_HSH_DAT((*key1 ^ xor1), 4);
+    key1++;
+    CVMX_MT_HSH_DAT((*key1 ^ xor1), 5);
+    key1++;
+    CVMX_MT_HSH_DAT((*key1 ^ xor1), 6);
+    key1++;
+    if (auth)
+	CVMX_MT_HSH_STARTSHA((*key1 ^ xor1));
+    else
+	CVMX_MT_HSH_STARTMD5((*key1 ^ xor1));
+
+    CVMX_MF_HSH_IV(inner[0], 0);
+    CVMX_MF_HSH_IV(inner[1], 1);
+    if (auth) {
+	inner[2] = 0;
+	CVMX_MF_HSH_IV(((uint64_t *) inner)[2], 2);
+    }
+
+    memset(hash_key, 0, sizeof(hash_key));
+    memcpy(hash_key, (uint8_t *) key, (auth ? 20 : 16));
+    key1 = (uint64_t *) hash_key;
+    if (auth) {
+      CVMX_MT_HSH_IV(0x67452301EFCDAB89ULL, 0);
+      CVMX_MT_HSH_IV(0x98BADCFE10325476ULL, 1);
+      CVMX_MT_HSH_IV(0xC3D2E1F000000000ULL, 2);
+    } else {
+      CVMX_MT_HSH_IV(0x0123456789ABCDEFULL, 0);
+      CVMX_MT_HSH_IV(0xFEDCBA9876543210ULL, 1);
+    }
+
+    CVMX_MT_HSH_DAT((*key1 ^ xor2), 0);
+    key1++;
+    CVMX_MT_HSH_DAT((*key1 ^ xor2), 1);
+    key1++;
+    CVMX_MT_HSH_DAT((*key1 ^ xor2), 2);
+    key1++;
+    CVMX_MT_HSH_DAT((*key1 ^ xor2), 3);
+    key1++;
+    CVMX_MT_HSH_DAT((*key1 ^ xor2), 4);
+    key1++;
+    CVMX_MT_HSH_DAT((*key1 ^ xor2), 5);
+    key1++;
+    CVMX_MT_HSH_DAT((*key1 ^ xor2), 6);
+    key1++;
+    if (auth)
+       CVMX_MT_HSH_STARTSHA((*key1 ^ xor2));
+    else 
+       CVMX_MT_HSH_STARTMD5((*key1 ^ xor2));
+
+    CVMX_MF_HSH_IV(outer[0], 0);
+    CVMX_MF_HSH_IV(outer[1], 1);
+    if (auth) {
+      outer[2] = 0;
+      CVMX_MF_HSH_IV(outer[2], 2);
+    }
+    octeon_crypto_disable(&state, flags);
+    return;
+}
+
+/****************************************************************************/
+/* DES functions */
+
+int
+octo_des_cbc_encrypt(
+    struct octo_sess *od,
+    struct scatterlist *sg, int sg_len,
+    int auth_off, int auth_len,
+    int crypt_off, int crypt_len,
+    int icv_off, uint8_t *ivp)
+{
+    uint64_t *data;
+    int data_i, data_l;
+    struct octeon_cop2_state state;
+    unsigned long flags;
+
+    dprintk("%s()\n", __FUNCTION__);
+
+    if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL ||
+	    (crypt_off & 0x7) || (crypt_off + crypt_len > sg_len))) {
+	dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d "
+		"auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d "
+		"icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len,
+		auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+	return -EINVAL;
+    }
+
+    SG_INIT(sg, data, data_i, data_l);
+
+    CVMX_PREFETCH0(ivp);
+    CVMX_PREFETCH0(od->octo_enckey);
+
+    flags = octeon_crypto_enable(&state);
+
+    /* load 3DES Key */
+    CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 0);
+    if (od->octo_encklen == 24) {
+	CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[1], 1);
+	CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+    } else if (od->octo_encklen == 8) {
+	CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 1);
+	CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 2);
+    } else {
+	octeon_crypto_disable(&state, flags);
+	dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen);
+	return -EINVAL;
+    }
+
+    CVMX_MT_3DES_IV(* (uint64_t *) ivp);
+
+    while (crypt_off > 0) {
+	SG_CONSUME(sg, data, data_i, data_l);
+	crypt_off -= 8;
+    }
+
+    while (crypt_len > 0) {
+	CVMX_MT_3DES_ENC_CBC(*data);
+	CVMX_MF_3DES_RESULT(*data);
+	SG_CONSUME(sg, data, data_i, data_l);
+	crypt_len -= 8;
+    }
+
+    octeon_crypto_disable(&state, flags);
+    return 0;
+}
+
+
+int
+octo_des_cbc_decrypt(
+    struct octo_sess *od,
+    struct scatterlist *sg, int sg_len,
+    int auth_off, int auth_len,
+    int crypt_off, int crypt_len,
+    int icv_off, uint8_t *ivp)
+{
+    uint64_t *data;
+    int data_i, data_l;
+    struct octeon_cop2_state state;
+    unsigned long flags;
+
+    dprintk("%s()\n", __FUNCTION__);
+
+    if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL ||
+	    (crypt_off & 0x7) || (crypt_off + crypt_len > sg_len))) {
+	dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d "
+		"auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d "
+		"icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len,
+		auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+	return -EINVAL;
+    }
+
+    SG_INIT(sg, data, data_i, data_l);
+
+    CVMX_PREFETCH0(ivp);
+    CVMX_PREFETCH0(od->octo_enckey);
+
+    flags = octeon_crypto_enable(&state);
+
+    /* load 3DES Key */
+    CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 0);
+    if (od->octo_encklen == 24) {
+	CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[1], 1);
+	CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+    } else if (od->octo_encklen == 8) {
+	CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 1);
+	CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 2);
+    } else {
+	octeon_crypto_disable(&state, flags);
+	dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen);
+	return -EINVAL;
+    }
+
+    CVMX_MT_3DES_IV(* (uint64_t *) ivp);
+
+    while (crypt_off > 0) {
+	SG_CONSUME(sg, data, data_i, data_l);
+	crypt_off -= 8;
+    }
+
+    while (crypt_len > 0) {
+	CVMX_MT_3DES_DEC_CBC(*data);
+	CVMX_MF_3DES_RESULT(*data);
+	SG_CONSUME(sg, data, data_i, data_l);
+	crypt_len -= 8;
+    }
+
+    octeon_crypto_disable(&state, flags);
+    return 0;
+}
+
+/****************************************************************************/
+/* AES functions */
+
+int
+octo_aes_cbc_encrypt(
+    struct octo_sess *od,
+    struct scatterlist *sg, int sg_len,
+    int auth_off, int auth_len,
+    int crypt_off, int crypt_len,
+    int icv_off, uint8_t *ivp)
+{
+    uint64_t *data, *pdata;
+    int data_i, data_l;
+    struct octeon_cop2_state state;
+    unsigned long flags;
+
+    dprintk("%s()\n", __FUNCTION__);
+
+    if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL ||
+	    (crypt_off & 0x7) || (crypt_off + crypt_len > sg_len))) {
+	dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d "
+		"auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d "
+		"icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len,
+		auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+	return -EINVAL;
+    }
+
+    SG_INIT(sg, data, data_i, data_l);
+
+    CVMX_PREFETCH0(ivp);
+    CVMX_PREFETCH0(od->octo_enckey);
+
+    flags = octeon_crypto_enable(&state);
+
+    /* load AES Key */
+    CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[0], 0);
+    CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[1], 1);
+
+    if (od->octo_encklen == 16) {
+	CVMX_MT_AES_KEY(0x0, 2);
+	CVMX_MT_AES_KEY(0x0, 3);
+    } else if (od->octo_encklen == 24) {
+	CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+	CVMX_MT_AES_KEY(0x0, 3);
+    } else if (od->octo_encklen == 32) {
+	CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+	CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[3], 3);
+    } else {
+	octeon_crypto_disable(&state, flags);
+	dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen);
+	return -EINVAL;
+    }
+    CVMX_MT_AES_KEYLENGTH(od->octo_encklen / 8 - 1);
+
+    CVMX_MT_AES_IV(((uint64_t *) ivp)[0], 0);
+    CVMX_MT_AES_IV(((uint64_t *) ivp)[1], 1);
+
+    while (crypt_off > 0) {
+	SG_CONSUME(sg, data, data_i, data_l);
+	crypt_off -= 8;
+    }
+
+    while (crypt_len > 0) {
+	pdata = data;
+	CVMX_MT_AES_ENC_CBC0(*data);
+	SG_CONSUME(sg, data, data_i, data_l);
+	CVMX_MT_AES_ENC_CBC1(*data);
+	CVMX_MF_AES_RESULT(*pdata, 0);
+	CVMX_MF_AES_RESULT(*data, 1);
+	SG_CONSUME(sg, data, data_i, data_l);
+	crypt_len -= 16;
+    }
+
+    octeon_crypto_disable(&state, flags);
+    return 0;
+}
+
+
+int
+octo_aes_cbc_decrypt(
+    struct octo_sess *od,
+    struct scatterlist *sg, int sg_len,
+    int auth_off, int auth_len,
+    int crypt_off, int crypt_len,
+    int icv_off, uint8_t *ivp)
+{
+    uint64_t *data, *pdata;
+    int data_i, data_l;
+    struct octeon_cop2_state state;
+    unsigned long flags;
+
+    dprintk("%s()\n", __FUNCTION__);
+
+    if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL ||
+	    (crypt_off & 0x7) || (crypt_off + crypt_len > sg_len))) {
+	dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d "
+		"auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d "
+		"icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len,
+		auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+	return -EINVAL;
+    }
+
+    SG_INIT(sg, data, data_i, data_l);
+
+    CVMX_PREFETCH0(ivp);
+    CVMX_PREFETCH0(od->octo_enckey);
+
+    flags = octeon_crypto_enable(&state);
+
+    /* load AES Key */
+    CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[0], 0);
+    CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[1], 1);
+
+    if (od->octo_encklen == 16) {
+	CVMX_MT_AES_KEY(0x0, 2);
+	CVMX_MT_AES_KEY(0x0, 3);
+    } else if (od->octo_encklen == 24) {
+	CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+	CVMX_MT_AES_KEY(0x0, 3);
+    } else if (od->octo_encklen == 32) {
+	CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+	CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[3], 3);
+    } else {
+	octeon_crypto_disable(&state, flags);
+	dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen);
+	return -EINVAL;
+    }
+    CVMX_MT_AES_KEYLENGTH(od->octo_encklen / 8 - 1);
+
+    CVMX_MT_AES_IV(((uint64_t *) ivp)[0], 0);
+    CVMX_MT_AES_IV(((uint64_t *) ivp)[1], 1);
+
+    while (crypt_off > 0) {
+	SG_CONSUME(sg, data, data_i, data_l);
+	crypt_off -= 8;
+    }
+
+    while (crypt_len > 0) {
+	pdata = data;
+	CVMX_MT_AES_DEC_CBC0(*data);
+	SG_CONSUME(sg, data, data_i, data_l);
+	CVMX_MT_AES_DEC_CBC1(*data);
+	CVMX_MF_AES_RESULT(*pdata, 0);
+	CVMX_MF_AES_RESULT(*data, 1);
+	SG_CONSUME(sg, data, data_i, data_l);
+	crypt_len -= 16;
+    }
+
+    octeon_crypto_disable(&state, flags);
+    return 0;
+}
+
+/****************************************************************************/
+/* MD5 */
+
+int
+octo_null_md5_encrypt(
+    struct octo_sess *od,
+    struct scatterlist *sg, int sg_len,
+    int auth_off, int auth_len,
+    int crypt_off, int crypt_len,
+    int icv_off, uint8_t *ivp)
+{
+    register int next = 0;
+    uint64_t *data;
+    uint64_t tmp1, tmp2;
+    int data_i, data_l, alen = auth_len;
+    struct octeon_cop2_state state;
+    unsigned long flags;
+
+    dprintk("%s()\n", __FUNCTION__);
+
+    if (unlikely(od == NULL || sg==NULL || sg_len==0 ||
+	    (auth_off & 0x7) || (auth_off + auth_len > sg_len))) {
+	dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d "
+		"auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d "
+		"icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len,
+		auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+	return -EINVAL;
+    }
+
+    SG_INIT(sg, data, data_i, data_l);
+
+    flags = octeon_crypto_enable(&state);
+
+    /* Load MD5 IV */
+    CVMX_MT_HSH_IV(od->octo_hminner[0], 0);
+    CVMX_MT_HSH_IV(od->octo_hminner[1], 1);
+
+    while (auth_off > 0) {
+	SG_CONSUME(sg, data, data_i, data_l);
+	auth_off -= 8;
+    }
+
+    while (auth_len > 0) {
+	CVM_LOAD_MD5_UNIT(*data, next);
+	auth_len -= 8;
+	SG_CONSUME(sg, data, data_i, data_l);
+    }
+
+    /* finish the hash */
+    CVMX_PREFETCH0(od->octo_hmouter);
+#if 0
+    if (unlikely(inplen)) {
+	uint64_t tmp = 0;
+	uint8_t *p = (uint8_t *) & tmp;
+	p[inplen] = 0x80;
+	do {
+	    inplen--;
+	    p[inplen] = ((uint8_t *) data)[inplen];
+	} while (inplen);
+	CVM_LOAD_MD5_UNIT(tmp, next);
+    } else {
+	CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next);
+    }
+#else
+    CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next);
+#endif
+
+    /* Finish Inner hash */
+    while (next != 7) {
+	CVM_LOAD_MD5_UNIT(((uint64_t) 0x0ULL), next);
+    }
+    CVMX_ES64(tmp1, ((alen + 64) << 3));
+    CVM_LOAD_MD5_UNIT(tmp1, next);
+
+    /* Get the inner hash of HMAC */
+    CVMX_MF_HSH_IV(tmp1, 0);
+    CVMX_MF_HSH_IV(tmp2, 1);
+
+    /* Initialize hash unit */
+    CVMX_MT_HSH_IV(od->octo_hmouter[0], 0);
+    CVMX_MT_HSH_IV(od->octo_hmouter[1], 1);
+
+    CVMX_MT_HSH_DAT(tmp1, 0);
+    CVMX_MT_HSH_DAT(tmp2, 1);
+    CVMX_MT_HSH_DAT(0x8000000000000000ULL, 2);
+    CVMX_MT_HSH_DATZ(3);
+    CVMX_MT_HSH_DATZ(4);
+    CVMX_MT_HSH_DATZ(5);
+    CVMX_MT_HSH_DATZ(6);
+    CVMX_ES64(tmp1, ((64 + 16) << 3));
+    CVMX_MT_HSH_STARTMD5(tmp1);
+
+    /* save the HMAC */
+    SG_INIT(sg, data, data_i, data_l);
+    while (icv_off > 0) {
+	SG_CONSUME(sg, data, data_i, data_l);
+	icv_off -= 8;
+    }
+    CVMX_MF_HSH_IV(*data, 0);
+    SG_CONSUME(sg, data, data_i, data_l);
+    CVMX_MF_HSH_IV(tmp1, 1);
+    *(uint32_t *)data = (uint32_t) (tmp1 >> 32);
+
+    octeon_crypto_disable(&state, flags);
+    return 0;
+}
+
+/****************************************************************************/
+/* SHA1 */
+
+int
+octo_null_sha1_encrypt(
+    struct octo_sess *od,
+    struct scatterlist *sg, int sg_len,
+    int auth_off, int auth_len,
+    int crypt_off, int crypt_len,
+    int icv_off, uint8_t *ivp)
+{
+    register int next = 0;
+    uint64_t *data;
+    uint64_t tmp1, tmp2, tmp3;
+    int data_i, data_l, alen = auth_len;
+    struct octeon_cop2_state state;
+    unsigned long flags;
+
+    dprintk("%s()\n", __FUNCTION__);
+
+    if (unlikely(od == NULL || sg==NULL || sg_len==0 ||
+	    (auth_off & 0x7) || (auth_off + auth_len > sg_len))) {
+	dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d "
+		"auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d "
+		"icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len,
+		auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+	return -EINVAL;
+    }
+
+    SG_INIT(sg, data, data_i, data_l);
+
+    flags = octeon_crypto_enable(&state);
+
+    /* Load SHA1 IV */
+    CVMX_MT_HSH_IV(od->octo_hminner[0], 0);
+    CVMX_MT_HSH_IV(od->octo_hminner[1], 1);
+    CVMX_MT_HSH_IV(od->octo_hminner[2], 2);
+
+    while (auth_off > 0) {
+	SG_CONSUME(sg, data, data_i, data_l);
+	auth_off -= 8;
+    }
+
+    while (auth_len > 0) {
+	CVM_LOAD_SHA_UNIT(*data, next);
+	auth_len -= 8;
+	SG_CONSUME(sg, data, data_i, data_l);
+    }
+
+    /* finish the hash */
+    CVMX_PREFETCH0(od->octo_hmouter);
+#if 0
+    if (unlikely(inplen)) {
+	uint64_t tmp = 0;
+	uint8_t *p = (uint8_t *) & tmp;
+	p[inplen] = 0x80;
+	do {
+	    inplen--;
+	    p[inplen] = ((uint8_t *) data)[inplen];
+	} while (inplen);
+	CVM_LOAD_MD5_UNIT(tmp, next);
+    } else {
+	CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next);
+    }
+#else
+    CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next);
+#endif
+
+    /* Finish Inner hash */
+    while (next != 7) {
+	CVM_LOAD_SHA_UNIT(((uint64_t) 0x0ULL), next);
+    }
+    CVM_LOAD_SHA_UNIT((uint64_t) ((alen + 64) << 3), next);
+
+    /* Get the inner hash of HMAC */
+    CVMX_MF_HSH_IV(tmp1, 0);
+    CVMX_MF_HSH_IV(tmp2, 1);
+    tmp3 = 0;
+    CVMX_MF_HSH_IV(tmp3, 2);
+
+    /* Initialize hash unit */
+    CVMX_MT_HSH_IV(od->octo_hmouter[0], 0);
+    CVMX_MT_HSH_IV(od->octo_hmouter[1], 1);
+    CVMX_MT_HSH_IV(od->octo_hmouter[2], 2);
+
+    CVMX_MT_HSH_DAT(tmp1, 0);
+    CVMX_MT_HSH_DAT(tmp2, 1);
+    tmp3 |= 0x0000000080000000;
+    CVMX_MT_HSH_DAT(tmp3, 2);
+    CVMX_MT_HSH_DATZ(3);
+    CVMX_MT_HSH_DATZ(4);
+    CVMX_MT_HSH_DATZ(5);
+    CVMX_MT_HSH_DATZ(6);
+    CVMX_MT_HSH_STARTSHA((uint64_t) ((64 + 20) << 3));
+
+    /* save the HMAC */
+    SG_INIT(sg, data, data_i, data_l);
+    while (icv_off > 0) {
+	SG_CONSUME(sg, data, data_i, data_l);
+	icv_off -= 8;
+    }
+    CVMX_MF_HSH_IV(*data, 0);
+    SG_CONSUME(sg, data, data_i, data_l);
+    CVMX_MF_HSH_IV(tmp1, 1);
+    *(uint32_t *)data = (uint32_t) (tmp1 >> 32);
+
+    octeon_crypto_disable(&state, flags);
+    return 0;
+}
+
+/****************************************************************************/
+/* DES MD5 */
+
+int
+octo_des_cbc_md5_encrypt(
+    struct octo_sess *od,
+    struct scatterlist *sg, int sg_len,
+    int auth_off, int auth_len,
+    int crypt_off, int crypt_len,
+    int icv_off, uint8_t *ivp)
+{
+    register int next = 0;
+    union {
+	uint32_t data32[2];
+	uint64_t data64[1];
+    } mydata;
+    uint64_t *data = &mydata.data64[0];
+    uint32_t *data32;
+    uint64_t tmp1, tmp2;
+    int data_i, data_l, alen = auth_len;
+    struct octeon_cop2_state state;
+    unsigned long flags;
+
+    dprintk("%s()\n", __FUNCTION__);
+
+    if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL ||
+	    (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) ||
+	    (crypt_len  & 0x7) ||
+	    (auth_len  & 0x7) ||
+	    (auth_off & 0x3) || (auth_off + auth_len > sg_len))) {
+	dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d "
+		"auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d "
+		"icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len,
+		auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+	return -EINVAL;
+    }
+
+    SG_INIT(sg, data32, data_i, data_l);
+
+    CVMX_PREFETCH0(ivp);
+    CVMX_PREFETCH0(od->octo_enckey);
+
+    flags = octeon_crypto_enable(&state);
+
+    /* load 3DES Key */
+    CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 0);
+    if (od->octo_encklen == 24) {
+	CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[1], 1);
+	CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+    } else if (od->octo_encklen == 8) {
+	CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 1);
+	CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 2);
+    } else {
+	octeon_crypto_disable(&state, flags);
+	dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen);
+	return -EINVAL;
+    }
+
+    CVMX_MT_3DES_IV(* (uint64_t *) ivp);
+
+    /* Load MD5 IV */
+    CVMX_MT_HSH_IV(od->octo_hminner[0], 0);
+    CVMX_MT_HSH_IV(od->octo_hminner[1], 1);
+
+    while (crypt_off > 0 && auth_off > 0) {
+	SG_CONSUME(sg, data32, data_i, data_l);
+	crypt_off -= 4;
+	auth_off -= 4;
+    }
+
+    while (crypt_len > 0 || auth_len > 0) {
+    	uint32_t *first = data32;
+	mydata.data32[0] = *first;
+	SG_CONSUME(sg, data32, data_i, data_l);
+	mydata.data32[1] = *data32;
+    	if (crypt_off <= 0) {
+	    if (crypt_len > 0) {
+		CVMX_MT_3DES_ENC_CBC(*data);
+		CVMX_MF_3DES_RESULT(*data);
+		crypt_len -= 8;
+	    }
+	} else
+	    crypt_off -= 8;
+    	if (auth_off <= 0) {
+	    if (auth_len > 0) {
+		CVM_LOAD_MD5_UNIT(*data, next);
+		auth_len -= 8;
+	    }
+	} else
+	    auth_off -= 8;
+	*first = mydata.data32[0];
+	*data32 = mydata.data32[1];
+	SG_CONSUME(sg, data32, data_i, data_l);
+    }
+
+    /* finish the hash */
+    CVMX_PREFETCH0(od->octo_hmouter);
+#if 0
+    if (unlikely(inplen)) {
+	uint64_t tmp = 0;
+	uint8_t *p = (uint8_t *) & tmp;
+	p[inplen] = 0x80;
+	do {
+	    inplen--;
+	    p[inplen] = ((uint8_t *) data)[inplen];
+	} while (inplen);
+	CVM_LOAD_MD5_UNIT(tmp, next);
+    } else {
+	CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next);
+    }
+#else
+    CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next);
+#endif
+
+    /* Finish Inner hash */
+    while (next != 7) {
+	CVM_LOAD_MD5_UNIT(((uint64_t) 0x0ULL), next);
+    }
+    CVMX_ES64(tmp1, ((alen + 64) << 3));
+    CVM_LOAD_MD5_UNIT(tmp1, next);
+
+    /* Get the inner hash of HMAC */
+    CVMX_MF_HSH_IV(tmp1, 0);
+    CVMX_MF_HSH_IV(tmp2, 1);
+
+    /* Initialize hash unit */
+    CVMX_MT_HSH_IV(od->octo_hmouter[0], 0);
+    CVMX_MT_HSH_IV(od->octo_hmouter[1], 1);
+
+    CVMX_MT_HSH_DAT(tmp1, 0);
+    CVMX_MT_HSH_DAT(tmp2, 1);
+    CVMX_MT_HSH_DAT(0x8000000000000000ULL, 2);
+    CVMX_MT_HSH_DATZ(3);
+    CVMX_MT_HSH_DATZ(4);
+    CVMX_MT_HSH_DATZ(5);
+    CVMX_MT_HSH_DATZ(6);
+    CVMX_ES64(tmp1, ((64 + 16) << 3));
+    CVMX_MT_HSH_STARTMD5(tmp1);
+
+    /* save the HMAC */
+    SG_INIT(sg, data32, data_i, data_l);
+    while (icv_off > 0) {
+	SG_CONSUME(sg, data32, data_i, data_l);
+	icv_off -= 4;
+    }
+    CVMX_MF_HSH_IV(tmp1, 0);
+    *data32 = (uint32_t) (tmp1 >> 32);
+    SG_CONSUME(sg, data32, data_i, data_l);
+    *data32 = (uint32_t) tmp1;
+    SG_CONSUME(sg, data32, data_i, data_l);
+    CVMX_MF_HSH_IV(tmp1, 1);
+    *data32 = (uint32_t) (tmp1 >> 32);
+
+    octeon_crypto_disable(&state, flags);
+    return 0;
+}
+
+int
+octo_des_cbc_md5_decrypt(
+    struct octo_sess *od,
+    struct scatterlist *sg, int sg_len,
+    int auth_off, int auth_len,
+    int crypt_off, int crypt_len,
+    int icv_off, uint8_t *ivp)
+{
+    register int next = 0;
+    union {
+	uint32_t data32[2];
+	uint64_t data64[1];
+    } mydata;
+    uint64_t *data = &mydata.data64[0];
+    uint32_t *data32;
+    uint64_t tmp1, tmp2;
+    int data_i, data_l, alen = auth_len;
+    struct octeon_cop2_state state;
+    unsigned long flags;
+
+    dprintk("%s()\n", __FUNCTION__);
+
+    if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL ||
+	    (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) ||
+	    (crypt_len  & 0x7) ||
+	    (auth_len  & 0x7) ||
+	    (auth_off & 0x3) || (auth_off + auth_len > sg_len))) {
+	dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d "
+		"auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d "
+		"icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len,
+		auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+	return -EINVAL;
+    }
+
+    SG_INIT(sg, data32, data_i, data_l);
+
+    CVMX_PREFETCH0(ivp);
+    CVMX_PREFETCH0(od->octo_enckey);
+
+    flags = octeon_crypto_enable(&state);
+
+    /* load 3DES Key */
+    CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 0);
+    if (od->octo_encklen == 24) {
+	CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[1], 1);
+	CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+    } else if (od->octo_encklen == 8) {
+	CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 1);
+	CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 2);
+    } else {
+	octeon_crypto_disable(&state, flags);
+	dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen);
+	return -EINVAL;
+    }
+
+    CVMX_MT_3DES_IV(* (uint64_t *) ivp);
+
+    /* Load MD5 IV */
+    CVMX_MT_HSH_IV(od->octo_hminner[0], 0);
+    CVMX_MT_HSH_IV(od->octo_hminner[1], 1);
+
+    while (crypt_off > 0 && auth_off > 0) {
+	SG_CONSUME(sg, data32, data_i, data_l);
+	crypt_off -= 4;
+	auth_off -= 4;
+    }
+
+    while (crypt_len > 0 || auth_len > 0) {
+    	uint32_t *first = data32;
+	mydata.data32[0] = *first;
+	SG_CONSUME(sg, data32, data_i, data_l);
+	mydata.data32[1] = *data32;
+    	if (auth_off <= 0) {
+	    if (auth_len > 0) {
+		CVM_LOAD_MD5_UNIT(*data, next);
+		auth_len -= 8;
+	    }
+	} else
+	    auth_off -= 8;
+    	if (crypt_off <= 0) {
+	    if (crypt_len > 0) {
+		CVMX_MT_3DES_DEC_CBC(*data);
+		CVMX_MF_3DES_RESULT(*data);
+		crypt_len -= 8;
+	    }
+	} else
+	    crypt_off -= 8;
+	*first = mydata.data32[0];
+	*data32 = mydata.data32[1];
+	SG_CONSUME(sg, data32, data_i, data_l);
+    }
+
+    /* finish the hash */
+    CVMX_PREFETCH0(od->octo_hmouter);
+#if 0
+    if (unlikely(inplen)) {
+	uint64_t tmp = 0;
+	uint8_t *p = (uint8_t *) & tmp;
+	p[inplen] = 0x80;
+	do {
+	    inplen--;
+	    p[inplen] = ((uint8_t *) data)[inplen];
+	} while (inplen);
+	CVM_LOAD_MD5_UNIT(tmp, next);
+    } else {
+	CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next);
+    }
+#else
+    CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next);
+#endif
+
+    /* Finish Inner hash */
+    while (next != 7) {
+	CVM_LOAD_MD5_UNIT(((uint64_t) 0x0ULL), next);
+    }
+    CVMX_ES64(tmp1, ((alen + 64) << 3));
+    CVM_LOAD_MD5_UNIT(tmp1, next);
+
+    /* Get the inner hash of HMAC */
+    CVMX_MF_HSH_IV(tmp1, 0);
+    CVMX_MF_HSH_IV(tmp2, 1);
+
+    /* Initialize hash unit */
+    CVMX_MT_HSH_IV(od->octo_hmouter[0], 0);
+    CVMX_MT_HSH_IV(od->octo_hmouter[1], 1);
+
+    CVMX_MT_HSH_DAT(tmp1, 0);
+    CVMX_MT_HSH_DAT(tmp2, 1);
+    CVMX_MT_HSH_DAT(0x8000000000000000ULL, 2);
+    CVMX_MT_HSH_DATZ(3);
+    CVMX_MT_HSH_DATZ(4);
+    CVMX_MT_HSH_DATZ(5);
+    CVMX_MT_HSH_DATZ(6);
+    CVMX_ES64(tmp1, ((64 + 16) << 3));
+    CVMX_MT_HSH_STARTMD5(tmp1);
+
+    /* save the HMAC */
+    SG_INIT(sg, data32, data_i, data_l);
+    while (icv_off > 0) {
+	SG_CONSUME(sg, data32, data_i, data_l);
+	icv_off -= 4;
+    }
+    CVMX_MF_HSH_IV(tmp1, 0);
+    *data32 = (uint32_t) (tmp1 >> 32);
+    SG_CONSUME(sg, data32, data_i, data_l);
+    *data32 = (uint32_t) tmp1;
+    SG_CONSUME(sg, data32, data_i, data_l);
+    CVMX_MF_HSH_IV(tmp1, 1);
+    *data32 = (uint32_t) (tmp1 >> 32);
+
+    octeon_crypto_disable(&state, flags);
+    return 0;
+}
+
+/****************************************************************************/
+/* DES SHA */
+
+int
+octo_des_cbc_sha1_encrypt(
+    struct octo_sess *od,
+    struct scatterlist *sg, int sg_len,
+    int auth_off, int auth_len,
+    int crypt_off, int crypt_len,
+    int icv_off, uint8_t *ivp)
+{
+    register int next = 0;
+    union {
+	uint32_t data32[2];
+	uint64_t data64[1];
+    } mydata;
+    uint64_t *data = &mydata.data64[0];
+    uint32_t *data32;
+    uint64_t tmp1, tmp2, tmp3;
+    int data_i, data_l, alen = auth_len;
+    struct octeon_cop2_state state;
+    unsigned long flags;
+
+    dprintk("%s()\n", __FUNCTION__);
+
+    if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL ||
+	    (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) ||
+	    (crypt_len  & 0x7) ||
+	    (auth_len  & 0x7) ||
+	    (auth_off & 0x3) || (auth_off + auth_len > sg_len))) {
+	dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d "
+		"auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d "
+		"icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len,
+		auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+	return -EINVAL;
+    }
+
+    SG_INIT(sg, data32, data_i, data_l);
+
+    CVMX_PREFETCH0(ivp);
+    CVMX_PREFETCH0(od->octo_enckey);
+
+    flags = octeon_crypto_enable(&state);
+
+    /* load 3DES Key */
+    CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 0);
+    if (od->octo_encklen == 24) {
+	CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[1], 1);
+	CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+    } else if (od->octo_encklen == 8) {
+	CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 1);
+	CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 2);
+    } else {
+	octeon_crypto_disable(&state, flags);
+	dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen);
+	return -EINVAL;
+    }
+
+    CVMX_MT_3DES_IV(* (uint64_t *) ivp);
+
+    /* Load SHA1 IV */
+    CVMX_MT_HSH_IV(od->octo_hminner[0], 0);
+    CVMX_MT_HSH_IV(od->octo_hminner[1], 1);
+    CVMX_MT_HSH_IV(od->octo_hminner[2], 2);
+
+    while (crypt_off > 0 && auth_off > 0) {
+	SG_CONSUME(sg, data32, data_i, data_l);
+	crypt_off -= 4;
+	auth_off -= 4;
+    }
+
+    while (crypt_len > 0 || auth_len > 0) {
+    	uint32_t *first = data32;
+	mydata.data32[0] = *first;
+	SG_CONSUME(sg, data32, data_i, data_l);
+	mydata.data32[1] = *data32;
+    	if (crypt_off <= 0) {
+	    if (crypt_len > 0) {
+		CVMX_MT_3DES_ENC_CBC(*data);
+		CVMX_MF_3DES_RESULT(*data);
+		crypt_len -= 8;
+	    }
+	} else
+	    crypt_off -= 8;
+    	if (auth_off <= 0) {
+	    if (auth_len > 0) {
+		CVM_LOAD_SHA_UNIT(*data, next);
+		auth_len -= 8;
+	    }
+	} else
+	    auth_off -= 8;
+	*first = mydata.data32[0];
+	*data32 = mydata.data32[1];
+	SG_CONSUME(sg, data32, data_i, data_l);
+    }
+
+    /* finish the hash */
+    CVMX_PREFETCH0(od->octo_hmouter);
+#if 0
+    if (unlikely(inplen)) {
+	uint64_t tmp = 0;
+	uint8_t *p = (uint8_t *) & tmp;
+	p[inplen] = 0x80;
+	do {
+	    inplen--;
+	    p[inplen] = ((uint8_t *) data)[inplen];
+	} while (inplen);
+	CVM_LOAD_SHA_UNIT(tmp, next);
+    } else {
+	CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next);
+    }
+#else
+    CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next);
+#endif
+
+    /* Finish Inner hash */
+    while (next != 7) {
+	CVM_LOAD_SHA_UNIT(((uint64_t) 0x0ULL), next);
+    }
+	CVM_LOAD_SHA_UNIT((uint64_t) ((alen + 64) << 3), next);
+
+    /* Get the inner hash of HMAC */
+    CVMX_MF_HSH_IV(tmp1, 0);
+    CVMX_MF_HSH_IV(tmp2, 1);
+    tmp3 = 0;
+    CVMX_MF_HSH_IV(tmp3, 2);
+
+    /* Initialize hash unit */
+    CVMX_MT_HSH_IV(od->octo_hmouter[0], 0);
+    CVMX_MT_HSH_IV(od->octo_hmouter[1], 1);
+    CVMX_MT_HSH_IV(od->octo_hmouter[2], 2);
+
+    CVMX_MT_HSH_DAT(tmp1, 0);
+    CVMX_MT_HSH_DAT(tmp2, 1);
+    tmp3 |= 0x0000000080000000;
+    CVMX_MT_HSH_DAT(tmp3, 2);
+    CVMX_MT_HSH_DATZ(3);
+    CVMX_MT_HSH_DATZ(4);
+    CVMX_MT_HSH_DATZ(5);
+    CVMX_MT_HSH_DATZ(6);
+    CVMX_MT_HSH_STARTSHA((uint64_t) ((64 + 20) << 3));
+
+    /* save the HMAC */
+    SG_INIT(sg, data32, data_i, data_l);
+    while (icv_off > 0) {
+	SG_CONSUME(sg, data32, data_i, data_l);
+	icv_off -= 4;
+    }
+    CVMX_MF_HSH_IV(tmp1, 0);
+    *data32 = (uint32_t) (tmp1 >> 32);
+    SG_CONSUME(sg, data32, data_i, data_l);
+    *data32 = (uint32_t) tmp1;
+    SG_CONSUME(sg, data32, data_i, data_l);
+    CVMX_MF_HSH_IV(tmp1, 1);
+    *data32 = (uint32_t) (tmp1 >> 32);
+
+    octeon_crypto_disable(&state, flags);
+    return 0;
+}
+
+int
+octo_des_cbc_sha1_decrypt(
+    struct octo_sess *od,
+    struct scatterlist *sg, int sg_len,
+    int auth_off, int auth_len,
+    int crypt_off, int crypt_len,
+    int icv_off, uint8_t *ivp)
+{
+    register int next = 0;
+    union {
+	uint32_t data32[2];
+	uint64_t data64[1];
+    } mydata;
+    uint64_t *data = &mydata.data64[0];
+    uint32_t *data32;
+    uint64_t tmp1, tmp2, tmp3;
+    int data_i, data_l, alen = auth_len;
+    struct octeon_cop2_state state;
+    unsigned long flags;
+
+    dprintk("%s()\n", __FUNCTION__);
+
+    if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL ||
+	    (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) ||
+	    (crypt_len  & 0x7) ||
+	    (auth_len  & 0x7) ||
+	    (auth_off & 0x3) || (auth_off + auth_len > sg_len))) {
+	dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d "
+		"auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d "
+		"icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len,
+		auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+	return -EINVAL;
+    }
+
+    SG_INIT(sg, data32, data_i, data_l);
+
+    CVMX_PREFETCH0(ivp);
+    CVMX_PREFETCH0(od->octo_enckey);
+
+    flags = octeon_crypto_enable(&state);
+
+    /* load 3DES Key */
+    CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 0);
+    if (od->octo_encklen == 24) {
+	CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[1], 1);
+	CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+    } else if (od->octo_encklen == 8) {
+	CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 1);
+	CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 2);
+    } else {
+	octeon_crypto_disable(&state, flags);
+	dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen);
+	return -EINVAL;
+    }
+
+    CVMX_MT_3DES_IV(* (uint64_t *) ivp);
+
+    /* Load SHA1 IV */
+    CVMX_MT_HSH_IV(od->octo_hminner[0], 0);
+    CVMX_MT_HSH_IV(od->octo_hminner[1], 1);
+    CVMX_MT_HSH_IV(od->octo_hminner[2], 2);
+
+    while (crypt_off > 0 && auth_off > 0) {
+	SG_CONSUME(sg, data32, data_i, data_l);
+	crypt_off -= 4;
+	auth_off -= 4;
+    }
+
+    while (crypt_len > 0 || auth_len > 0) {
+    	uint32_t *first = data32;
+	mydata.data32[0] = *first;
+	SG_CONSUME(sg, data32, data_i, data_l);
+	mydata.data32[1] = *data32;
+    	if (auth_off <= 0) {
+	    if (auth_len > 0) {
+		CVM_LOAD_SHA_UNIT(*data, next);
+		auth_len -= 8;
+	    }
+	} else
+	    auth_off -= 8;
+    	if (crypt_off <= 0) {
+	    if (crypt_len > 0) {
+		CVMX_MT_3DES_DEC_CBC(*data);
+		CVMX_MF_3DES_RESULT(*data);
+		crypt_len -= 8;
+	    }
+	} else
+	    crypt_off -= 8;
+	*first = mydata.data32[0];
+	*data32 = mydata.data32[1];
+	SG_CONSUME(sg, data32, data_i, data_l);
+    }
+
+    /* finish the hash */
+    CVMX_PREFETCH0(od->octo_hmouter);
+#if 0
+    if (unlikely(inplen)) {
+	uint64_t tmp = 0;
+	uint8_t *p = (uint8_t *) & tmp;
+	p[inplen] = 0x80;
+	do {
+	    inplen--;
+	    p[inplen] = ((uint8_t *) data)[inplen];
+	} while (inplen);
+	CVM_LOAD_SHA_UNIT(tmp, next);
+    } else {
+	CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next);
+    }
+#else
+    CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next);
+#endif
+
+    /* Finish Inner hash */
+    while (next != 7) {
+	CVM_LOAD_SHA_UNIT(((uint64_t) 0x0ULL), next);
+    }
+    CVM_LOAD_SHA_UNIT((uint64_t) ((alen + 64) << 3), next);
+
+    /* Get the inner hash of HMAC */
+    CVMX_MF_HSH_IV(tmp1, 0);
+    CVMX_MF_HSH_IV(tmp2, 1);
+    tmp3 = 0;
+    CVMX_MF_HSH_IV(tmp3, 2);
+
+    /* Initialize hash unit */
+    CVMX_MT_HSH_IV(od->octo_hmouter[0], 0);
+    CVMX_MT_HSH_IV(od->octo_hmouter[1], 1);
+    CVMX_MT_HSH_IV(od->octo_hmouter[2], 2);
+
+    CVMX_MT_HSH_DAT(tmp1, 0);
+    CVMX_MT_HSH_DAT(tmp2, 1);
+    tmp3 |= 0x0000000080000000;
+    CVMX_MT_HSH_DAT(tmp3, 2);
+    CVMX_MT_HSH_DATZ(3);
+    CVMX_MT_HSH_DATZ(4);
+    CVMX_MT_HSH_DATZ(5);
+    CVMX_MT_HSH_DATZ(6);
+    CVMX_MT_HSH_STARTSHA((uint64_t) ((64 + 20) << 3));
+    /* save the HMAC */
+    SG_INIT(sg, data32, data_i, data_l);
+    while (icv_off > 0) {
+	SG_CONSUME(sg, data32, data_i, data_l);
+	icv_off -= 4;
+    }
+    CVMX_MF_HSH_IV(tmp1, 0);
+    *data32 = (uint32_t) (tmp1 >> 32);
+    SG_CONSUME(sg, data32, data_i, data_l);
+    *data32 = (uint32_t) tmp1;
+    SG_CONSUME(sg, data32, data_i, data_l);
+    CVMX_MF_HSH_IV(tmp1, 1);
+    *data32 = (uint32_t) (tmp1 >> 32);
+
+    octeon_crypto_disable(&state, flags);
+    return 0;
+}
+
+/****************************************************************************/
+/* AES MD5 */
+
+int
+octo_aes_cbc_md5_encrypt(
+    struct octo_sess *od,
+    struct scatterlist *sg, int sg_len,
+    int auth_off, int auth_len,
+    int crypt_off, int crypt_len,
+    int icv_off, uint8_t *ivp)
+{
+    register int next = 0;
+    union {
+	uint32_t data32[2];
+	uint64_t data64[1];
+    } mydata[2];
+    uint64_t *pdata = &mydata[0].data64[0];
+    uint64_t *data =  &mydata[1].data64[0];
+    uint32_t *data32;
+    uint64_t tmp1, tmp2;
+    int data_i, data_l, alen = auth_len;
+    struct octeon_cop2_state state;
+    unsigned long flags;
+
+    dprintk("%s()\n", __FUNCTION__);
+
+    if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL ||
+	    (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) ||
+	    (crypt_len  & 0x7) ||
+	    (auth_len  & 0x7) ||
+	    (auth_off & 0x3) || (auth_off + auth_len > sg_len))) {
+	dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d "
+		"auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d "
+		"icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len,
+		auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+	return -EINVAL;
+    }
+
+    SG_INIT(sg, data32, data_i, data_l);
+
+    CVMX_PREFETCH0(ivp);
+    CVMX_PREFETCH0(od->octo_enckey);
+
+    flags = octeon_crypto_enable(&state);
+
+    /* load AES Key */
+    CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[0], 0);
+    CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[1], 1);
+
+    if (od->octo_encklen == 16) {
+	CVMX_MT_AES_KEY(0x0, 2);
+	CVMX_MT_AES_KEY(0x0, 3);
+    } else if (od->octo_encklen == 24) {
+	CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+	CVMX_MT_AES_KEY(0x0, 3);
+    } else if (od->octo_encklen == 32) {
+	CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+	CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[3], 3);
+    } else {
+	octeon_crypto_disable(&state, flags);
+	dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen);
+	return -EINVAL;
+    }
+    CVMX_MT_AES_KEYLENGTH(od->octo_encklen / 8 - 1);
+
+    CVMX_MT_AES_IV(((uint64_t *) ivp)[0], 0);
+    CVMX_MT_AES_IV(((uint64_t *) ivp)[1], 1);
+
+    /* Load MD5 IV */
+    CVMX_MT_HSH_IV(od->octo_hminner[0], 0);
+    CVMX_MT_HSH_IV(od->octo_hminner[1], 1);
+
+    while (crypt_off > 0 && auth_off > 0) {
+	SG_CONSUME(sg, data32, data_i, data_l);
+	crypt_off -= 4;
+	auth_off -= 4;
+    }
+
+    /* align auth and crypt */
+    while (crypt_off > 0 && auth_len > 0) {
+	mydata[0].data32[0] = *data32;
+	SG_CONSUME(sg, data32, data_i, data_l);
+	mydata[0].data32[1] = *data32;
+	SG_CONSUME(sg, data32, data_i, data_l);
+	CVM_LOAD_MD5_UNIT(*pdata, next);
+	crypt_off -= 8;
+	auth_len -= 8;
+    }
+
+    while (crypt_len > 0) {
+    	uint32_t *pdata32[3];
+
+	pdata32[0] = data32;
+	mydata[0].data32[0] = *data32;
+	SG_CONSUME(sg, data32, data_i, data_l);
+
+	pdata32[1] = data32;
+	mydata[0].data32[1] = *data32;
+	SG_CONSUME(sg, data32, data_i, data_l);
+
+	pdata32[2] = data32;
+	mydata[1].data32[0] = *data32;
+	SG_CONSUME(sg, data32, data_i, data_l);
+
+	mydata[1].data32[1] = *data32;
+
+	CVMX_MT_AES_ENC_CBC0(*pdata);
+	CVMX_MT_AES_ENC_CBC1(*data);
+	CVMX_MF_AES_RESULT(*pdata, 0);
+	CVMX_MF_AES_RESULT(*data, 1);
+	crypt_len -= 16;
+
+	if (auth_len > 0) {
+	    CVM_LOAD_MD5_UNIT(*pdata, next);
+	    auth_len -= 8;
+	}
+	if (auth_len > 0) {
+	    CVM_LOAD_MD5_UNIT(*data, next);
+	    auth_len -= 8;
+	}
+
+	*pdata32[0] = mydata[0].data32[0];
+	*pdata32[1] = mydata[0].data32[1];
+	*pdata32[2] = mydata[1].data32[0];
+	*data32     = mydata[1].data32[1];
+
+	SG_CONSUME(sg, data32, data_i, data_l);
+    }
+
+    /* finish any left over hashing */
+    while (auth_len > 0) {
+	mydata[0].data32[0] = *data32;
+	SG_CONSUME(sg, data32, data_i, data_l);
+	mydata[0].data32[1] = *data32;
+	SG_CONSUME(sg, data32, data_i, data_l);
+	CVM_LOAD_MD5_UNIT(*pdata, next);
+	auth_len -= 8;
+    }
+
+    /* finish the hash */
+    CVMX_PREFETCH0(od->octo_hmouter);
+#if 0
+    if (unlikely(inplen)) {
+	uint64_t tmp = 0;
+	uint8_t *p = (uint8_t *) & tmp;
+	p[inplen] = 0x80;
+	do {
+	    inplen--;
+	    p[inplen] = ((uint8_t *) data)[inplen];
+	} while (inplen);
+	CVM_LOAD_MD5_UNIT(tmp, next);
+    } else {
+	CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next);
+    }
+#else
+    CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next);
+#endif
+
+    /* Finish Inner hash */
+    while (next != 7) {
+	CVM_LOAD_MD5_UNIT(((uint64_t) 0x0ULL), next);
+    }
+    CVMX_ES64(tmp1, ((alen + 64) << 3));
+    CVM_LOAD_MD5_UNIT(tmp1, next);
+
+    /* Get the inner hash of HMAC */
+    CVMX_MF_HSH_IV(tmp1, 0);
+    CVMX_MF_HSH_IV(tmp2, 1);
+
+    /* Initialize hash unit */
+    CVMX_MT_HSH_IV(od->octo_hmouter[0], 0);
+    CVMX_MT_HSH_IV(od->octo_hmouter[1], 1);
+
+    CVMX_MT_HSH_DAT(tmp1, 0);
+    CVMX_MT_HSH_DAT(tmp2, 1);
+    CVMX_MT_HSH_DAT(0x8000000000000000ULL, 2);
+    CVMX_MT_HSH_DATZ(3);
+    CVMX_MT_HSH_DATZ(4);
+    CVMX_MT_HSH_DATZ(5);
+    CVMX_MT_HSH_DATZ(6);
+    CVMX_ES64(tmp1, ((64 + 16) << 3));
+    CVMX_MT_HSH_STARTMD5(tmp1);
+
+    /* save the HMAC */
+    SG_INIT(sg, data32, data_i, data_l);
+    while (icv_off > 0) {
+	SG_CONSUME(sg, data32, data_i, data_l);
+	icv_off -= 4;
+    }
+    CVMX_MF_HSH_IV(tmp1, 0);
+    *data32 = (uint32_t) (tmp1 >> 32);
+    SG_CONSUME(sg, data32, data_i, data_l);
+    *data32 = (uint32_t) tmp1;
+    SG_CONSUME(sg, data32, data_i, data_l);
+    CVMX_MF_HSH_IV(tmp1, 1);
+    *data32 = (uint32_t) (tmp1 >> 32);
+
+    octeon_crypto_disable(&state, flags);
+    return 0;
+}
+
+int
+octo_aes_cbc_md5_decrypt(
+    struct octo_sess *od,
+    struct scatterlist *sg, int sg_len,
+    int auth_off, int auth_len,
+    int crypt_off, int crypt_len,
+    int icv_off, uint8_t *ivp)
+{
+    register int next = 0;
+    union {
+	uint32_t data32[2];
+	uint64_t data64[1];
+    } mydata[2];
+    uint64_t *pdata = &mydata[0].data64[0];
+    uint64_t *data =  &mydata[1].data64[0];
+    uint32_t *data32;
+    uint64_t tmp1, tmp2;
+    int data_i, data_l, alen = auth_len;
+    struct octeon_cop2_state state;
+    unsigned long flags;
+
+    dprintk("%s()\n", __FUNCTION__);
+
+    if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL ||
+	    (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) ||
+	    (crypt_len  & 0x7) ||
+	    (auth_len  & 0x7) ||
+	    (auth_off & 0x3) || (auth_off + auth_len > sg_len))) {
+	dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d "
+		"auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d "
+		"icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len,
+		auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+	return -EINVAL;
+    }
+
+    SG_INIT(sg, data32, data_i, data_l);
+
+    CVMX_PREFETCH0(ivp);
+    CVMX_PREFETCH0(od->octo_enckey);
+
+    flags = octeon_crypto_enable(&state);
+
+    /* load AES Key */
+    CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[0], 0);
+    CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[1], 1);
+
+    if (od->octo_encklen == 16) {
+	CVMX_MT_AES_KEY(0x0, 2);
+	CVMX_MT_AES_KEY(0x0, 3);
+    } else if (od->octo_encklen == 24) {
+	CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+	CVMX_MT_AES_KEY(0x0, 3);
+    } else if (od->octo_encklen == 32) {
+	CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+	CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[3], 3);
+    } else {
+	octeon_crypto_disable(&state, flags);
+	dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen);
+	return -EINVAL;
+    }
+    CVMX_MT_AES_KEYLENGTH(od->octo_encklen / 8 - 1);
+
+    CVMX_MT_AES_IV(((uint64_t *) ivp)[0], 0);
+    CVMX_MT_AES_IV(((uint64_t *) ivp)[1], 1);
+
+    /* Load MD5 IV */
+    CVMX_MT_HSH_IV(od->octo_hminner[0], 0);
+    CVMX_MT_HSH_IV(od->octo_hminner[1], 1);
+
+    while (crypt_off > 0 && auth_off > 0) {
+	SG_CONSUME(sg, data32, data_i, data_l);
+	crypt_off -= 4;
+	auth_off -= 4;
+    }
+
+    /* align auth and crypt */
+    while (crypt_off > 0 && auth_len > 0) {
+	mydata[0].data32[0] = *data32;
+	SG_CONSUME(sg, data32, data_i, data_l);
+	mydata[0].data32[1] = *data32;
+	SG_CONSUME(sg, data32, data_i, data_l);
+	CVM_LOAD_MD5_UNIT(*pdata, next);
+	crypt_off -= 8;
+	auth_len -= 8;
+    }
+
+    while (crypt_len > 0) {
+    	uint32_t *pdata32[3];
+
+	pdata32[0] = data32;
+	mydata[0].data32[0] = *data32;
+	SG_CONSUME(sg, data32, data_i, data_l);
+	pdata32[1] = data32;
+	mydata[0].data32[1] = *data32;
+	SG_CONSUME(sg, data32, data_i, data_l);
+	pdata32[2] = data32;
+	mydata[1].data32[0] = *data32;
+	SG_CONSUME(sg, data32, data_i, data_l);
+	mydata[1].data32[1] = *data32;
+
+	if (auth_len > 0) {
+	    CVM_LOAD_MD5_UNIT(*pdata, next);
+	    auth_len -= 8;
+	}
+
+	if (auth_len > 0) {
+	    CVM_LOAD_MD5_UNIT(*data, next);
+	    auth_len -= 8;
+	}
+
+	CVMX_MT_AES_DEC_CBC0(*pdata);
+	CVMX_MT_AES_DEC_CBC1(*data);
+	CVMX_MF_AES_RESULT(*pdata, 0);
+	CVMX_MF_AES_RESULT(*data, 1);
+	crypt_len -= 16;
+
+	*pdata32[0] = mydata[0].data32[0];
+	*pdata32[1] = mydata[0].data32[1];
+	*pdata32[2] = mydata[1].data32[0];
+	*data32     = mydata[1].data32[1];
+
+	SG_CONSUME(sg, data32, data_i, data_l);
+    }
+
+    /* finish left over hash if any */
+    while (auth_len > 0) {
+	mydata[0].data32[0] = *data32;
+	SG_CONSUME(sg, data32, data_i, data_l);
+	mydata[0].data32[1] = *data32;
+	SG_CONSUME(sg, data32, data_i, data_l);
+	CVM_LOAD_MD5_UNIT(*pdata, next);
+	auth_len -= 8;
+    }
+
+
+    /* finish the hash */
+    CVMX_PREFETCH0(od->octo_hmouter);
+#if 0
+    if (unlikely(inplen)) {
+	uint64_t tmp = 0;
+	uint8_t *p = (uint8_t *) & tmp;
+	p[inplen] = 0x80;
+	do {
+	    inplen--;
+	    p[inplen] = ((uint8_t *) data)[inplen];
+	} while (inplen);
+	CVM_LOAD_MD5_UNIT(tmp, next);
+    } else {
+	CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next);
+    }
+#else
+    CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next);
+#endif
+
+    /* Finish Inner hash */
+    while (next != 7) {
+	CVM_LOAD_MD5_UNIT(((uint64_t) 0x0ULL), next);
+    }
+    CVMX_ES64(tmp1, ((alen + 64) << 3));
+    CVM_LOAD_MD5_UNIT(tmp1, next);
+
+    /* Get the inner hash of HMAC */
+    CVMX_MF_HSH_IV(tmp1, 0);
+    CVMX_MF_HSH_IV(tmp2, 1);
+
+    /* Initialize hash unit */
+    CVMX_MT_HSH_IV(od->octo_hmouter[0], 0);
+    CVMX_MT_HSH_IV(od->octo_hmouter[1], 1);
+
+    CVMX_MT_HSH_DAT(tmp1, 0);
+    CVMX_MT_HSH_DAT(tmp2, 1);
+    CVMX_MT_HSH_DAT(0x8000000000000000ULL, 2);
+    CVMX_MT_HSH_DATZ(3);
+    CVMX_MT_HSH_DATZ(4);
+    CVMX_MT_HSH_DATZ(5);
+    CVMX_MT_HSH_DATZ(6);
+    CVMX_ES64(tmp1, ((64 + 16) << 3));
+    CVMX_MT_HSH_STARTMD5(tmp1);
+
+    /* save the HMAC */
+    SG_INIT(sg, data32, data_i, data_l);
+    while (icv_off > 0) {
+	SG_CONSUME(sg, data32, data_i, data_l);
+	icv_off -= 4;
+    }
+    CVMX_MF_HSH_IV(tmp1, 0);
+    *data32 = (uint32_t) (tmp1 >> 32);
+    SG_CONSUME(sg, data32, data_i, data_l);
+    *data32 = (uint32_t) tmp1;
+    SG_CONSUME(sg, data32, data_i, data_l);
+    CVMX_MF_HSH_IV(tmp1, 1);
+    *data32 = (uint32_t) (tmp1 >> 32);
+
+    octeon_crypto_disable(&state, flags);
+    return 0;
+}
+
+/****************************************************************************/
+/* AES SHA1 */
+
+int
+octo_aes_cbc_sha1_encrypt(
+    struct octo_sess *od,
+    struct scatterlist *sg, int sg_len,
+    int auth_off, int auth_len,
+    int crypt_off, int crypt_len,
+    int icv_off, uint8_t *ivp)
+{
+    register int next = 0;
+    union {
+	uint32_t data32[2];
+	uint64_t data64[1];
+    } mydata[2];
+    uint64_t *pdata = &mydata[0].data64[0];
+    uint64_t *data =  &mydata[1].data64[0];
+    uint32_t *data32;
+    uint64_t tmp1, tmp2, tmp3;
+    int data_i, data_l, alen = auth_len;
+    struct octeon_cop2_state state;
+    unsigned long flags;
+
+    dprintk("%s(a_off=%d a_len=%d c_off=%d c_len=%d icv_off=%d)\n",
+			__FUNCTION__, auth_off, auth_len, crypt_off, crypt_len, icv_off);
+
+    if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL ||
+	    (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) ||
+	    (crypt_len  & 0x7) ||
+	    (auth_len  & 0x7) ||
+	    (auth_off & 0x3) || (auth_off + auth_len > sg_len))) {
+	dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d "
+		"auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d "
+		"icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len,
+		auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+	return -EINVAL;
+    }
+
+    SG_INIT(sg, data32, data_i, data_l);
+
+    CVMX_PREFETCH0(ivp);
+    CVMX_PREFETCH0(od->octo_enckey);
+
+    flags = octeon_crypto_enable(&state);
+
+    /* load AES Key */
+    CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[0], 0);
+    CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[1], 1);
+
+    if (od->octo_encklen == 16) {
+	CVMX_MT_AES_KEY(0x0, 2);
+	CVMX_MT_AES_KEY(0x0, 3);
+    } else if (od->octo_encklen == 24) {
+	CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+	CVMX_MT_AES_KEY(0x0, 3);
+    } else if (od->octo_encklen == 32) {
+	CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+	CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[3], 3);
+    } else {
+	octeon_crypto_disable(&state, flags);
+	dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen);
+	return -EINVAL;
+    }
+    CVMX_MT_AES_KEYLENGTH(od->octo_encklen / 8 - 1);
+
+    CVMX_MT_AES_IV(((uint64_t *) ivp)[0], 0);
+    CVMX_MT_AES_IV(((uint64_t *) ivp)[1], 1);
+
+    /* Load SHA IV */
+    CVMX_MT_HSH_IV(od->octo_hminner[0], 0);
+    CVMX_MT_HSH_IV(od->octo_hminner[1], 1);
+    CVMX_MT_HSH_IV(od->octo_hminner[2], 2);
+
+    while (crypt_off > 0 && auth_off > 0) {
+	SG_CONSUME(sg, data32, data_i, data_l);
+	crypt_off -= 4;
+	auth_off -= 4;
+    }
+
+    /* align auth and crypt */
+    while (crypt_off > 0 && auth_len > 0) {
+	mydata[0].data32[0] = *data32;
+	SG_CONSUME(sg, data32, data_i, data_l);
+	mydata[0].data32[1] = *data32;
+	SG_CONSUME(sg, data32, data_i, data_l);
+	CVM_LOAD_SHA_UNIT(*pdata, next);
+	crypt_off -= 8;
+	auth_len -= 8;
+    }
+
+    while (crypt_len > 0) {
+    	uint32_t *pdata32[3];
+
+	pdata32[0] = data32;
+	mydata[0].data32[0] = *data32;
+	SG_CONSUME(sg, data32, data_i, data_l);
+	pdata32[1] = data32;
+	mydata[0].data32[1] = *data32;
+	SG_CONSUME(sg, data32, data_i, data_l);
+	pdata32[2] = data32;
+	mydata[1].data32[0] = *data32;
+	SG_CONSUME(sg, data32, data_i, data_l);
+	mydata[1].data32[1] = *data32;
+
+	CVMX_MT_AES_ENC_CBC0(*pdata);
+	CVMX_MT_AES_ENC_CBC1(*data);
+	CVMX_MF_AES_RESULT(*pdata, 0);
+	CVMX_MF_AES_RESULT(*data, 1);
+	crypt_len -= 16;
+
+	if (auth_len > 0) {
+	    CVM_LOAD_SHA_UNIT(*pdata, next);
+	    auth_len -= 8;
+	}
+	if (auth_len > 0) {
+	    CVM_LOAD_SHA_UNIT(*data, next);
+	    auth_len -= 8;
+	}
+
+	*pdata32[0] = mydata[0].data32[0];
+	*pdata32[1] = mydata[0].data32[1];
+	*pdata32[2] = mydata[1].data32[0];
+	*data32     = mydata[1].data32[1];
+
+	SG_CONSUME(sg, data32, data_i, data_l);
+    }
+
+    /* finish and hashing */
+    while (auth_len > 0) {
+	mydata[0].data32[0] = *data32;
+	SG_CONSUME(sg, data32, data_i, data_l);
+	mydata[0].data32[1] = *data32;
+	SG_CONSUME(sg, data32, data_i, data_l);
+	CVM_LOAD_SHA_UNIT(*pdata, next);
+	auth_len -= 8;
+    }
+
+    /* finish the hash */
+    CVMX_PREFETCH0(od->octo_hmouter);
+#if 0
+    if (unlikely(inplen)) {
+	uint64_t tmp = 0;
+	uint8_t *p = (uint8_t *) & tmp;
+	p[inplen] = 0x80;
+	do {
+	    inplen--;
+	    p[inplen] = ((uint8_t *) data)[inplen];
+	} while (inplen);
+	CVM_LOAD_SHA_UNIT(tmp, next);
+    } else {
+	CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next);
+    }
+#else
+    CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next);
+#endif
+
+    /* Finish Inner hash */
+    while (next != 7) {
+	CVM_LOAD_SHA_UNIT(((uint64_t) 0x0ULL), next);
+    }
+    CVM_LOAD_SHA_UNIT((uint64_t) ((alen + 64) << 3), next);
+
+    /* Get the inner hash of HMAC */
+    CVMX_MF_HSH_IV(tmp1, 0);
+    CVMX_MF_HSH_IV(tmp2, 1);
+    tmp3 = 0;
+    CVMX_MF_HSH_IV(tmp3, 2);
+
+    /* Initialize hash unit */
+    CVMX_MT_HSH_IV(od->octo_hmouter[0], 0);
+    CVMX_MT_HSH_IV(od->octo_hmouter[1], 1);
+    CVMX_MT_HSH_IV(od->octo_hmouter[2], 2);
+
+    CVMX_MT_HSH_DAT(tmp1, 0);
+    CVMX_MT_HSH_DAT(tmp2, 1);
+    tmp3 |= 0x0000000080000000;
+    CVMX_MT_HSH_DAT(tmp3, 2);
+    CVMX_MT_HSH_DATZ(3);
+    CVMX_MT_HSH_DATZ(4);
+    CVMX_MT_HSH_DATZ(5);
+    CVMX_MT_HSH_DATZ(6);
+    CVMX_MT_HSH_STARTSHA((uint64_t) ((64 + 20) << 3));
+
+    /* finish the hash */
+    CVMX_PREFETCH0(od->octo_hmouter);
+#if 0
+    if (unlikely(inplen)) {
+	uint64_t tmp = 0;
+	uint8_t *p = (uint8_t *) & tmp;
+	p[inplen] = 0x80;
+	do {
+	    inplen--;
+	    p[inplen] = ((uint8_t *) data)[inplen];
+	} while (inplen);
+	CVM_LOAD_MD5_UNIT(tmp, next);
+    } else {
+	CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next);
+    }
+#else
+    CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next);
+#endif
+
+    /* save the HMAC */
+    SG_INIT(sg, data32, data_i, data_l);
+    while (icv_off > 0) {
+	SG_CONSUME(sg, data32, data_i, data_l);
+	icv_off -= 4;
+    }
+    CVMX_MF_HSH_IV(tmp1, 0);
+    *data32 = (uint32_t) (tmp1 >> 32);
+    SG_CONSUME(sg, data32, data_i, data_l);
+    *data32 = (uint32_t) tmp1;
+    SG_CONSUME(sg, data32, data_i, data_l);
+    CVMX_MF_HSH_IV(tmp1, 1);
+    *data32 = (uint32_t) (tmp1 >> 32);
+
+    octeon_crypto_disable(&state, flags);
+    return 0;
+}
+
+int
+octo_aes_cbc_sha1_decrypt(
+    struct octo_sess *od,
+    struct scatterlist *sg, int sg_len,
+    int auth_off, int auth_len,
+    int crypt_off, int crypt_len,
+    int icv_off, uint8_t *ivp)
+{
+    register int next = 0;
+    union {
+	uint32_t data32[2];
+	uint64_t data64[1];
+    } mydata[2];
+    uint64_t *pdata = &mydata[0].data64[0];
+    uint64_t *data =  &mydata[1].data64[0];
+    uint32_t *data32;
+    uint64_t tmp1, tmp2, tmp3;
+    int data_i, data_l, alen = auth_len;
+    struct octeon_cop2_state state;
+    unsigned long flags;
+
+    dprintk("%s(a_off=%d a_len=%d c_off=%d c_len=%d icv_off=%d)\n",
+			__FUNCTION__, auth_off, auth_len, crypt_off, crypt_len, icv_off);
+
+    if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL ||
+	    (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) ||
+	    (crypt_len  & 0x7) ||
+	    (auth_len  & 0x7) ||
+	    (auth_off & 0x3) || (auth_off + auth_len > sg_len))) {
+	dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d "
+		"auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d "
+		"icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len,
+		auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+	return -EINVAL;
+    }
+
+    SG_INIT(sg, data32, data_i, data_l);
+
+    CVMX_PREFETCH0(ivp);
+    CVMX_PREFETCH0(od->octo_enckey);
+
+    flags = octeon_crypto_enable(&state);
+
+    /* load AES Key */
+    CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[0], 0);
+    CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[1], 1);
+
+    if (od->octo_encklen == 16) {
+	CVMX_MT_AES_KEY(0x0, 2);
+	CVMX_MT_AES_KEY(0x0, 3);
+    } else if (od->octo_encklen == 24) {
+	CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+	CVMX_MT_AES_KEY(0x0, 3);
+    } else if (od->octo_encklen == 32) {
+	CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2);
+	CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[3], 3);
+    } else {
+	octeon_crypto_disable(&state, flags);
+	dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen);
+	return -EINVAL;
+    }
+    CVMX_MT_AES_KEYLENGTH(od->octo_encklen / 8 - 1);
+
+    CVMX_MT_AES_IV(((uint64_t *) ivp)[0], 0);
+    CVMX_MT_AES_IV(((uint64_t *) ivp)[1], 1);
+
+    /* Load SHA1 IV */
+    CVMX_MT_HSH_IV(od->octo_hminner[0], 0);
+    CVMX_MT_HSH_IV(od->octo_hminner[1], 1);
+    CVMX_MT_HSH_IV(od->octo_hminner[2], 2);
+
+    while (crypt_off > 0 && auth_off > 0) {
+	SG_CONSUME(sg, data32, data_i, data_l);
+	crypt_off -= 4;
+	auth_off -= 4;
+    }
+
+    /* align auth and crypt */
+    while (crypt_off > 0 && auth_len > 0) {
+	mydata[0].data32[0] = *data32;
+	SG_CONSUME(sg, data32, data_i, data_l);
+	mydata[0].data32[1] = *data32;
+	SG_CONSUME(sg, data32, data_i, data_l);
+	CVM_LOAD_SHA_UNIT(*pdata, next);
+	crypt_off -= 8;
+	auth_len -= 8;
+    }
+
+    while (crypt_len > 0) {
+    	uint32_t *pdata32[3];
+
+	pdata32[0] = data32;
+	mydata[0].data32[0] = *data32;
+	SG_CONSUME(sg, data32, data_i, data_l);
+	pdata32[1] = data32;
+	mydata[0].data32[1] = *data32;
+	SG_CONSUME(sg, data32, data_i, data_l);
+	pdata32[2] = data32;
+	mydata[1].data32[0] = *data32;
+	SG_CONSUME(sg, data32, data_i, data_l);
+	mydata[1].data32[1] = *data32;
+
+	if (auth_len > 0) {
+	    CVM_LOAD_SHA_UNIT(*pdata, next);
+	    auth_len -= 8;
+	}
+	if (auth_len > 0) {
+	    CVM_LOAD_SHA_UNIT(*data, next);
+	    auth_len -= 8;
+	}
+
+	CVMX_MT_AES_DEC_CBC0(*pdata);
+	CVMX_MT_AES_DEC_CBC1(*data);
+	CVMX_MF_AES_RESULT(*pdata, 0);
+	CVMX_MF_AES_RESULT(*data, 1);
+	crypt_len -= 16;
+
+	*pdata32[0] = mydata[0].data32[0];
+	*pdata32[1] = mydata[0].data32[1];
+	*pdata32[2] = mydata[1].data32[0];
+	*data32     = mydata[1].data32[1];
+
+	SG_CONSUME(sg, data32, data_i, data_l);
+    }
+
+    /* finish and leftover hashing */
+    while (auth_len > 0) {
+	mydata[0].data32[0] = *data32;
+	SG_CONSUME(sg, data32, data_i, data_l);
+	mydata[0].data32[1] = *data32;
+	SG_CONSUME(sg, data32, data_i, data_l);
+	CVM_LOAD_SHA_UNIT(*pdata, next);
+	auth_len -= 8;
+    }
+
+    /* finish the hash */
+    CVMX_PREFETCH0(od->octo_hmouter);
+#if 0
+    if (unlikely(inplen)) {
+	uint64_t tmp = 0;
+	uint8_t *p = (uint8_t *) & tmp;
+	p[inplen] = 0x80;
+	do {
+	    inplen--;
+	    p[inplen] = ((uint8_t *) data)[inplen];
+	} while (inplen);
+	CVM_LOAD_SHA_UNIT(tmp, next);
+    } else {
+	CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next);
+    }
+#else
+    CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next);
+#endif
+
+    /* Finish Inner hash */
+    while (next != 7) {
+	CVM_LOAD_SHA_UNIT(((uint64_t) 0x0ULL), next);
+    }
+	CVM_LOAD_SHA_UNIT((uint64_t) ((alen + 64) << 3), next);
+
+    /* Get the inner hash of HMAC */
+    CVMX_MF_HSH_IV(tmp1, 0);
+    CVMX_MF_HSH_IV(tmp2, 1);
+    tmp3 = 0;
+    CVMX_MF_HSH_IV(tmp3, 2);
+
+    /* Initialize hash unit */
+    CVMX_MT_HSH_IV(od->octo_hmouter[0], 0);
+    CVMX_MT_HSH_IV(od->octo_hmouter[1], 1);
+    CVMX_MT_HSH_IV(od->octo_hmouter[2], 2);
+
+    CVMX_MT_HSH_DAT(tmp1, 0);
+    CVMX_MT_HSH_DAT(tmp2, 1);
+    tmp3 |= 0x0000000080000000;
+    CVMX_MT_HSH_DAT(tmp3, 2);
+    CVMX_MT_HSH_DATZ(3);
+    CVMX_MT_HSH_DATZ(4);
+    CVMX_MT_HSH_DATZ(5);
+    CVMX_MT_HSH_DATZ(6);
+    CVMX_MT_HSH_STARTSHA((uint64_t) ((64 + 20) << 3));
+
+    /* finish the hash */
+    CVMX_PREFETCH0(od->octo_hmouter);
+#if 0
+    if (unlikely(inplen)) {
+	uint64_t tmp = 0;
+	uint8_t *p = (uint8_t *) & tmp;
+	p[inplen] = 0x80;
+	do {
+	    inplen--;
+	    p[inplen] = ((uint8_t *) data)[inplen];
+	} while (inplen);
+	CVM_LOAD_MD5_UNIT(tmp, next);
+    } else {
+	CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next);
+    }
+#else
+    CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next);
+#endif
+
+    /* save the HMAC */
+    SG_INIT(sg, data32, data_i, data_l);
+    while (icv_off > 0) {
+	SG_CONSUME(sg, data32, data_i, data_l);
+	icv_off -= 4;
+    }
+    CVMX_MF_HSH_IV(tmp1, 0);
+    *data32 = (uint32_t) (tmp1 >> 32);
+    SG_CONSUME(sg, data32, data_i, data_l);
+    *data32 = (uint32_t) tmp1;
+    SG_CONSUME(sg, data32, data_i, data_l);
+    CVMX_MF_HSH_IV(tmp1, 1);
+    *data32 = (uint32_t) (tmp1 >> 32);
+
+    octeon_crypto_disable(&state, flags);
+    return 0;
+}
+
+/****************************************************************************/
diff --git a/target/linux/generic/files/crypto/ocf/cryptocteon/cryptocteon.c b/target/linux/generic/files/crypto/ocf/cryptocteon/cryptocteon.c
new file mode 100644
index 0000000000..9940f59a9a
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/cryptocteon/cryptocteon.c
@@ -0,0 +1,574 @@
+/*
+ * Octeon Crypto for OCF
+ *
+ * Written by David McCullough <david_mccullough@mcafee.com>
+ * Copyright (C) 2009-2010 David McCullough
+ *
+ * LICENSE TERMS
+ *
+ * The free distribution and use of this software in both source and binary
+ * form is allowed (with or without changes) provided that:
+ *
+ *   1. distributions of this source code include the above copyright
+ *      notice, this list of conditions and the following disclaimer;
+ *
+ *   2. distributions in binary form include the above copyright
+ *      notice, this list of conditions and the following disclaimer
+ *      in the documentation and/or other associated materials;
+ *
+ *   3. the copyright holder's name is not used to endorse products
+ *      built using this software without specific written permission.
+ *
+ * DISCLAIMER
+ *
+ * This software is provided 'as is' with no explicit or implied warranties
+ * in respect of its properties, including, but not limited to, correctness
+ * and/or fitness for purpose.
+ * ---------------------------------------------------------------------------
+ */
+
+#ifndef AUTOCONF_INCLUDED
+#include <linux/config.h>
+#endif
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/crypto.h>
+#include <linux/mm.h>
+#include <linux/skbuff.h>
+#include <linux/random.h>
+#include <linux/scatterlist.h>
+
+#include <cryptodev.h>
+#include <uio.h>
+
+struct {
+	softc_device_decl	sc_dev;
+} octo_softc;
+
+#define offset_in_page(p) ((unsigned long)(p) & ~PAGE_MASK)
+
+struct octo_sess {
+	int					 octo_encalg;
+	#define MAX_CIPHER_KEYLEN	64
+	char				 octo_enckey[MAX_CIPHER_KEYLEN];
+	int					 octo_encklen;
+
+	int					 octo_macalg;
+	#define MAX_HASH_KEYLEN	64
+	char				 octo_mackey[MAX_HASH_KEYLEN];
+	int					 octo_macklen;
+	int					 octo_mackey_set;
+
+	int					 octo_mlen;
+	int					 octo_ivsize;
+
+#if 0
+	int					(*octo_decrypt)(struct scatterlist *sg, int sg_len,
+							uint8_t *key, int key_len, uint8_t * iv,
+							uint64_t *hminner, uint64_t *hmouter);
+
+	int					(*octo_encrypt)(struct scatterlist *sg, int sg_len,
+							uint8_t *key, int key_len, uint8_t * iv,
+							uint64_t *hminner, uint64_t *hmouter);
+#else
+	int					(*octo_encrypt)(struct octo_sess *od,
+	                      struct scatterlist *sg, int sg_len,
+						  int auth_off, int auth_len,
+						  int crypt_off, int crypt_len,
+						  int icv_off, uint8_t *ivp);
+	int					(*octo_decrypt)(struct octo_sess *od,
+	                      struct scatterlist *sg, int sg_len,
+						  int auth_off, int auth_len,
+						  int crypt_off, int crypt_len,
+						  int icv_off, uint8_t *ivp);
+#endif
+
+	uint64_t			 octo_hminner[3];
+	uint64_t			 octo_hmouter[3];
+};
+
+int32_t octo_id = -1;
+module_param(octo_id, int, 0444);
+MODULE_PARM_DESC(octo_id, "Read-Only OCF ID for cryptocteon driver");
+
+static struct octo_sess **octo_sessions = NULL;
+static u_int32_t octo_sesnum = 0;
+
+static	int octo_process(device_t, struct cryptop *, int);
+static	int octo_newsession(device_t, u_int32_t *, struct cryptoini *);
+static	int octo_freesession(device_t, u_int64_t);
+
+static device_method_t octo_methods = {
+	/* crypto device methods */
+	DEVMETHOD(cryptodev_newsession,	octo_newsession),
+	DEVMETHOD(cryptodev_freesession,octo_freesession),
+	DEVMETHOD(cryptodev_process,	octo_process),
+};
+
+#define debug octo_debug
+int octo_debug = 0;
+module_param(octo_debug, int, 0644);
+MODULE_PARM_DESC(octo_debug, "Enable debug");
+
+
+#include "cavium_crypto.c"
+
+
+/*
+ * Generate a new octo session.  We artifically limit it to a single
+ * hash/cipher or hash-cipher combo just to make it easier, most callers
+ * do not expect more than this anyway.
+ */
+static int
+octo_newsession(device_t dev, u_int32_t *sid, struct cryptoini *cri)
+{
+	struct cryptoini *c, *encini = NULL, *macini = NULL;
+	struct octo_sess **ocd;
+	int i;
+
+	dprintk("%s()\n", __FUNCTION__);
+	if (sid == NULL || cri == NULL) {
+		dprintk("%s,%d - EINVAL\n", __FILE__, __LINE__);
+		return EINVAL;
+	}
+
+	/*
+	 * To keep it simple, we only handle hash, cipher or hash/cipher in a
+	 * session,  you cannot currently do multiple ciphers/hashes in one
+	 * session even though it would be possibel to code this driver to
+	 * handle it.
+	 */
+	for (i = 0, c = cri; c && i < 2; i++) {
+		if (c->cri_alg == CRYPTO_MD5_HMAC ||
+				c->cri_alg == CRYPTO_SHA1_HMAC ||
+				c->cri_alg == CRYPTO_NULL_HMAC) {
+			if (macini) {
+				break;
+			}
+			macini = c;
+		}
+		if (c->cri_alg == CRYPTO_DES_CBC ||
+				c->cri_alg == CRYPTO_3DES_CBC ||
+				c->cri_alg == CRYPTO_AES_CBC ||
+				c->cri_alg == CRYPTO_NULL_CBC) {
+			if (encini) {
+				break;
+			}
+			encini = c;
+		}
+		c = c->cri_next;
+	}
+	if (!macini && !encini) {
+		dprintk("%s,%d - EINVAL bad cipher/hash or combination\n",
+				__FILE__, __LINE__);
+		return EINVAL;
+	}
+	if (c) {
+		dprintk("%s,%d - EINVAL cannot handle chained cipher/hash combos\n",
+				__FILE__, __LINE__);
+		return EINVAL;
+	}
+
+	/*
+	 * So we have something we can do, lets setup the session
+	 */
+
+	if (octo_sessions) {
+		for (i = 1; i < octo_sesnum; i++)
+			if (octo_sessions[i] == NULL)
+				break;
+	} else
+		i = 1;		/* NB: to silence compiler warning */
+
+	if (octo_sessions == NULL || i == octo_sesnum) {
+		if (octo_sessions == NULL) {
+			i = 1; /* We leave octo_sessions[0] empty */
+			octo_sesnum = CRYPTO_SW_SESSIONS;
+		} else
+			octo_sesnum *= 2;
+
+		ocd = kmalloc(octo_sesnum * sizeof(struct octo_sess *), SLAB_ATOMIC);
+		if (ocd == NULL) {
+			/* Reset session number */
+			if (octo_sesnum == CRYPTO_SW_SESSIONS)
+				octo_sesnum = 0;
+			else
+				octo_sesnum /= 2;
+			dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__);
+			return ENOBUFS;
+		}
+		memset(ocd, 0, octo_sesnum * sizeof(struct octo_sess *));
+
+		/* Copy existing sessions */
+		if (octo_sessions) {
+			memcpy(ocd, octo_sessions,
+			    (octo_sesnum / 2) * sizeof(struct octo_sess *));
+			kfree(octo_sessions);
+		}
+
+		octo_sessions = ocd;
+	}
+
+	ocd = &octo_sessions[i];
+	*sid = i;
+
+
+	*ocd = (struct octo_sess *) kmalloc(sizeof(struct octo_sess), SLAB_ATOMIC);
+	if (*ocd == NULL) {
+		octo_freesession(NULL, i);
+		dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__);
+		return ENOBUFS;
+	}
+	memset(*ocd, 0, sizeof(struct octo_sess));
+
+	if (encini && encini->cri_key) {
+		(*ocd)->octo_encklen = (encini->cri_klen + 7) / 8;
+		memcpy((*ocd)->octo_enckey, encini->cri_key, (*ocd)->octo_encklen);
+	}
+
+	if (macini && macini->cri_key) {
+		(*ocd)->octo_macklen = (macini->cri_klen + 7) / 8;
+		memcpy((*ocd)->octo_mackey, macini->cri_key, (*ocd)->octo_macklen);
+	}
+
+	(*ocd)->octo_mlen = 0;
+	if (encini && encini->cri_mlen)
+		(*ocd)->octo_mlen = encini->cri_mlen;
+	else if (macini && macini->cri_mlen)
+		(*ocd)->octo_mlen = macini->cri_mlen;
+	else
+		(*ocd)->octo_mlen = 12;
+
+	/*
+	 * point c at the enc if it exists, otherwise the mac
+	 */
+	c = encini ? encini : macini;
+
+	switch (c->cri_alg) {
+	case CRYPTO_DES_CBC:
+	case CRYPTO_3DES_CBC:
+		(*ocd)->octo_ivsize  = 8;
+		switch (macini ? macini->cri_alg : -1) {
+		case CRYPTO_MD5_HMAC:
+			(*ocd)->octo_encrypt = octo_des_cbc_md5_encrypt;
+			(*ocd)->octo_decrypt = octo_des_cbc_md5_decrypt;
+			octo_calc_hash(0, macini->cri_key, (*ocd)->octo_hminner,
+					(*ocd)->octo_hmouter);
+			break;
+		case CRYPTO_SHA1_HMAC:
+			(*ocd)->octo_encrypt = octo_des_cbc_sha1_encrypt;
+			(*ocd)->octo_decrypt = octo_des_cbc_sha1_encrypt;
+			octo_calc_hash(1, macini->cri_key, (*ocd)->octo_hminner,
+					(*ocd)->octo_hmouter);
+			break;
+		case -1:
+			(*ocd)->octo_encrypt = octo_des_cbc_encrypt;
+			(*ocd)->octo_decrypt = octo_des_cbc_decrypt;
+			break;
+		default:
+			octo_freesession(NULL, i);
+			dprintk("%s,%d: EINVALn", __FILE__, __LINE__);
+			return EINVAL;
+		}
+		break;
+	case CRYPTO_AES_CBC:
+		(*ocd)->octo_ivsize  = 16;
+		switch (macini ? macini->cri_alg : -1) {
+		case CRYPTO_MD5_HMAC:
+			(*ocd)->octo_encrypt = octo_aes_cbc_md5_encrypt;
+			(*ocd)->octo_decrypt = octo_aes_cbc_md5_decrypt;
+			octo_calc_hash(0, macini->cri_key, (*ocd)->octo_hminner,
+					(*ocd)->octo_hmouter);
+			break;
+		case CRYPTO_SHA1_HMAC:
+			(*ocd)->octo_encrypt = octo_aes_cbc_sha1_encrypt;
+			(*ocd)->octo_decrypt = octo_aes_cbc_sha1_decrypt;
+			octo_calc_hash(1, macini->cri_key, (*ocd)->octo_hminner,
+					(*ocd)->octo_hmouter);
+			break;
+		case -1:
+			(*ocd)->octo_encrypt = octo_aes_cbc_encrypt;
+			(*ocd)->octo_decrypt = octo_aes_cbc_decrypt;
+			break;
+		default:
+			octo_freesession(NULL, i);
+			dprintk("%s,%d: EINVALn", __FILE__, __LINE__);
+			return EINVAL;
+		}
+		break;
+	case CRYPTO_MD5_HMAC:
+		(*ocd)->octo_encrypt = octo_null_md5_encrypt;
+		(*ocd)->octo_decrypt = octo_null_md5_encrypt;
+		octo_calc_hash(0, macini->cri_key, (*ocd)->octo_hminner,
+				(*ocd)->octo_hmouter);
+		break;
+	case CRYPTO_SHA1_HMAC:
+		(*ocd)->octo_encrypt = octo_null_sha1_encrypt;
+		(*ocd)->octo_decrypt = octo_null_sha1_encrypt;
+		octo_calc_hash(1, macini->cri_key, (*ocd)->octo_hminner,
+				(*ocd)->octo_hmouter);
+		break;
+	default:
+		octo_freesession(NULL, i);
+		dprintk("%s,%d: EINVALn", __FILE__, __LINE__);
+		return EINVAL;
+	}
+
+	(*ocd)->octo_encalg = encini ? encini->cri_alg : -1;
+	(*ocd)->octo_macalg = macini ? macini->cri_alg : -1;
+
+	return 0;
+}
+
+/*
+ * Free a session.
+ */
+static int
+octo_freesession(device_t dev, u_int64_t tid)
+{
+	u_int32_t sid = CRYPTO_SESID2LID(tid);
+
+	dprintk("%s()\n", __FUNCTION__);
+	if (sid > octo_sesnum || octo_sessions == NULL ||
+			octo_sessions[sid] == NULL) {
+		dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+		return(EINVAL);
+	}
+
+	/* Silently accept and return */
+	if (sid == 0)
+		return(0);
+
+	if (octo_sessions[sid])
+		kfree(octo_sessions[sid]);
+	octo_sessions[sid] = NULL;
+	return 0;
+}
+
+/*
+ * Process a request.
+ */
+static int
+octo_process(device_t dev, struct cryptop *crp, int hint)
+{
+	struct cryptodesc *crd;
+	struct octo_sess *od;
+	u_int32_t lid;
+#define SCATTERLIST_MAX 16
+	struct scatterlist sg[SCATTERLIST_MAX];
+	int sg_num, sg_len;
+	struct sk_buff *skb = NULL;
+	struct uio *uiop = NULL;
+	struct cryptodesc *enccrd = NULL, *maccrd = NULL;
+	unsigned char *ivp = NULL;
+	unsigned char iv_data[HASH_MAX_LEN];
+	int auth_off = 0, auth_len = 0, crypt_off = 0, crypt_len = 0, icv_off = 0;
+
+	dprintk("%s()\n", __FUNCTION__);
+	/* Sanity check */
+	if (crp == NULL) {
+		dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+		return EINVAL;
+	}
+
+	crp->crp_etype = 0;
+
+	if (crp->crp_desc == NULL || crp->crp_buf == NULL) {
+		dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+		crp->crp_etype = EINVAL;
+		goto done;
+	}
+
+	lid = crp->crp_sid & 0xffffffff;
+	if (lid >= octo_sesnum || lid == 0 || octo_sessions == NULL ||
+			octo_sessions[lid] == NULL) {
+		crp->crp_etype = ENOENT;
+		dprintk("%s,%d: ENOENT\n", __FILE__, __LINE__);
+		goto done;
+	}
+	od = octo_sessions[lid];
+
+	/*
+	 * do some error checking outside of the loop for SKB and IOV processing
+	 * this leaves us with valid skb or uiop pointers for later
+	 */
+	if (crp->crp_flags & CRYPTO_F_SKBUF) {
+		skb = (struct sk_buff *) crp->crp_buf;
+		if (skb_shinfo(skb)->nr_frags >= SCATTERLIST_MAX) {
+			printk("%s,%d: %d nr_frags > SCATTERLIST_MAX", __FILE__, __LINE__,
+					skb_shinfo(skb)->nr_frags);
+			goto done;
+		}
+	} else if (crp->crp_flags & CRYPTO_F_IOV) {
+		uiop = (struct uio *) crp->crp_buf;
+		if (uiop->uio_iovcnt > SCATTERLIST_MAX) {
+			printk("%s,%d: %d uio_iovcnt > SCATTERLIST_MAX", __FILE__, __LINE__,
+					uiop->uio_iovcnt);
+			goto done;
+		}
+	}
+
+	/* point our enccrd and maccrd appropriately */
+	crd = crp->crp_desc;
+	if (crd->crd_alg == od->octo_encalg) enccrd = crd;
+	if (crd->crd_alg == od->octo_macalg) maccrd = crd;
+	crd = crd->crd_next;
+	if (crd) {
+		if (crd->crd_alg == od->octo_encalg) enccrd = crd;
+		if (crd->crd_alg == od->octo_macalg) maccrd = crd;
+		crd = crd->crd_next;
+	}
+	if (crd) {
+		crp->crp_etype = EINVAL;
+		dprintk("%s,%d: ENOENT - descriptors do not match session\n",
+				__FILE__, __LINE__);
+		goto done;
+	}
+
+	if (enccrd) {
+		if (enccrd->crd_flags & CRD_F_IV_EXPLICIT) {
+			ivp = enccrd->crd_iv;
+		} else {
+			ivp = iv_data;
+			crypto_copydata(crp->crp_flags, crp->crp_buf,
+					enccrd->crd_inject, od->octo_ivsize, (caddr_t) ivp);
+		}
+
+		if (maccrd) {
+			auth_off = maccrd->crd_skip;
+			auth_len = maccrd->crd_len;
+			icv_off  = maccrd->crd_inject;
+		}
+
+		crypt_off = enccrd->crd_skip;
+		crypt_len = enccrd->crd_len;
+	} else { /* if (maccrd) */
+		auth_off = maccrd->crd_skip;
+		auth_len = maccrd->crd_len;
+		icv_off  = maccrd->crd_inject;
+	}
+
+
+	/*
+	 * setup the SG list to cover the buffer
+	 */
+	memset(sg, 0, sizeof(sg));
+	if (crp->crp_flags & CRYPTO_F_SKBUF) {
+		int i, len;
+
+		sg_num = 0;
+		sg_len = 0;
+
+		len = skb_headlen(skb);
+		sg_set_page(&sg[sg_num], virt_to_page(skb->data), len,
+				offset_in_page(skb->data));
+		sg_len += len;
+		sg_num++;
+
+		for (i = 0; i < skb_shinfo(skb)->nr_frags && sg_num < SCATTERLIST_MAX;
+				i++) {
+			len = skb_shinfo(skb)->frags[i].size;
+			sg_set_page(&sg[sg_num], skb_shinfo(skb)->frags[i].page,
+					len, skb_shinfo(skb)->frags[i].page_offset);
+			sg_len += len;
+			sg_num++;
+		}
+	} else if (crp->crp_flags & CRYPTO_F_IOV) {
+		int len;
+
+		sg_len = 0;
+		for (sg_num = 0; sg_len < crp->crp_ilen &&
+				sg_num < uiop->uio_iovcnt &&
+				sg_num < SCATTERLIST_MAX; sg_num++) {
+			len = uiop->uio_iov[sg_num].iov_len;
+			sg_set_page(&sg[sg_num],
+					virt_to_page(uiop->uio_iov[sg_num].iov_base), len,
+					offset_in_page(uiop->uio_iov[sg_num].iov_base));
+			sg_len += len;
+		}
+	} else {
+		sg_len = crp->crp_ilen;
+		sg_set_page(&sg[0], virt_to_page(crp->crp_buf), sg_len,
+				offset_in_page(crp->crp_buf));
+		sg_num = 1;
+	}
+
+
+	/*
+	 * setup a new explicit key
+	 */
+	if (enccrd) {
+		if (enccrd->crd_flags & CRD_F_KEY_EXPLICIT) {
+			od->octo_encklen = (enccrd->crd_klen + 7) / 8;
+			memcpy(od->octo_enckey, enccrd->crd_key, od->octo_encklen);
+		}
+	}
+	if (maccrd) {
+		if (maccrd->crd_flags & CRD_F_KEY_EXPLICIT) {
+			od->octo_macklen = (maccrd->crd_klen + 7) / 8;
+			memcpy(od->octo_mackey, maccrd->crd_key, od->octo_macklen);
+			od->octo_mackey_set = 0;
+		}
+		if (!od->octo_mackey_set) {
+			octo_calc_hash(maccrd->crd_alg == CRYPTO_MD5_HMAC ? 0 : 1,
+				maccrd->crd_key, od->octo_hminner, od->octo_hmouter);
+			od->octo_mackey_set = 1;
+		}
+	}
+
+
+	if (!enccrd || (enccrd->crd_flags & CRD_F_ENCRYPT))
+		(*od->octo_encrypt)(od, sg, sg_len,
+				auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+	else
+		(*od->octo_decrypt)(od, sg, sg_len,
+				auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp);
+
+done:
+	crypto_done(crp);
+	return 0;
+}
+
+static int
+cryptocteon_init(void)
+{
+	dprintk("%s(%p)\n", __FUNCTION__, cryptocteon_init);
+
+	softc_device_init(&octo_softc, "cryptocteon", 0, octo_methods);
+
+	octo_id = crypto_get_driverid(softc_get_device(&octo_softc),
+			CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SYNC);
+	if (octo_id < 0) {
+		printk("Cryptocteon device cannot initialize!");
+		return -ENODEV;
+	}
+
+	crypto_register(octo_id, CRYPTO_MD5_HMAC, 0,0);
+	crypto_register(octo_id, CRYPTO_SHA1_HMAC, 0,0);
+	//crypto_register(octo_id, CRYPTO_MD5, 0,0);
+	//crypto_register(octo_id, CRYPTO_SHA1, 0,0);
+	crypto_register(octo_id, CRYPTO_DES_CBC, 0,0);
+	crypto_register(octo_id, CRYPTO_3DES_CBC, 0,0);
+	crypto_register(octo_id, CRYPTO_AES_CBC, 0,0);
+
+	return(0);
+}
+
+static void
+cryptocteon_exit(void)
+{
+	dprintk("%s()\n", __FUNCTION__);
+	crypto_unregister_all(octo_id);
+	octo_id = -1;
+}
+
+module_init(cryptocteon_init);
+module_exit(cryptocteon_exit);
+
+MODULE_LICENSE("BSD");
+MODULE_AUTHOR("David McCullough <david_mccullough@mcafee.com>");
+MODULE_DESCRIPTION("Cryptocteon (OCF module for Cavium OCTEON crypto)");
diff --git a/target/linux/generic/files/crypto/ocf/cryptodev.c b/target/linux/generic/files/crypto/ocf/cryptodev.c
new file mode 100644
index 0000000000..87a4c379d4
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/cryptodev.c
@@ -0,0 +1,1061 @@
+/*	$OpenBSD: cryptodev.c,v 1.52 2002/06/19 07:22:46 deraadt Exp $	*/
+
+/*-
+ * Linux port done by David McCullough <david_mccullough@mcafee.com>
+ * Copyright (C) 2006-2010 David McCullough
+ * Copyright (C) 2004-2005 Intel Corporation.
+ * The license and original author are listed below.
+ *
+ * Copyright (c) 2001 Theo de Raadt
+ * Copyright (c) 2002-2006 Sam Leffler, Errno Consulting
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in the
+ *   documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Effort sponsored in part by the Defense Advanced Research Projects
+ * Agency (DARPA) and Air Force Research Laboratory, Air Force
+ * Materiel Command, USAF, under agreement number F30602-01-2-0537.
+ *
+__FBSDID("$FreeBSD: src/sys/opencrypto/cryptodev.c,v 1.34 2007/05/09 19:37:02 gnn Exp $");
+ */
+
+#ifndef AUTOCONF_INCLUDED
+#include <linux/config.h>
+#endif
+#include <linux/types.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+#include <linux/list.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/unistd.h>
+#include <linux/module.h>
+#include <linux/wait.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/dcache.h>
+#include <linux/file.h>
+#include <linux/mount.h>
+#include <linux/miscdevice.h>
+#include <linux/version.h>
+#include <asm/uaccess.h>
+
+#include <cryptodev.h>
+#include <uio.h>
+
+extern asmlinkage long sys_dup(unsigned int fildes);
+
+#define debug cryptodev_debug
+int cryptodev_debug = 0;
+module_param(cryptodev_debug, int, 0644);
+MODULE_PARM_DESC(cryptodev_debug, "Enable cryptodev debug");
+
+struct csession_info {
+	u_int16_t	blocksize;
+	u_int16_t	minkey, maxkey;
+
+	u_int16_t	keysize;
+	/* u_int16_t	hashsize;  */
+	u_int16_t	authsize;
+	u_int16_t	authkey;
+	/* u_int16_t	ctxsize; */
+};
+
+struct csession {
+	struct list_head	list;
+	u_int64_t	sid;
+	u_int32_t	ses;
+
+	wait_queue_head_t waitq;
+
+	u_int32_t	cipher;
+
+	u_int32_t	mac;
+
+	caddr_t		key;
+	int		keylen;
+	u_char		tmp_iv[EALG_MAX_BLOCK_LEN];
+
+	caddr_t		mackey;
+	int		mackeylen;
+
+	struct csession_info info;
+
+	struct iovec	iovec;
+	struct uio	uio;
+	int		error;
+};
+
+struct fcrypt {
+	struct list_head	csessions;
+	int		sesn;
+};
+
+static struct csession *csefind(struct fcrypt *, u_int);
+static int csedelete(struct fcrypt *, struct csession *);
+static struct csession *cseadd(struct fcrypt *, struct csession *);
+static struct csession *csecreate(struct fcrypt *, u_int64_t,
+		struct cryptoini *crie, struct cryptoini *cria, struct csession_info *);
+static int csefree(struct csession *);
+
+static	int cryptodev_op(struct csession *, struct crypt_op *);
+static	int cryptodev_key(struct crypt_kop *);
+static	int cryptodev_find(struct crypt_find_op *);
+
+static int cryptodev_cb(void *);
+static int cryptodev_open(struct inode *inode, struct file *filp);
+
+/*
+ * Check a crypto identifier to see if it requested
+ * a valid crid and it's capabilities match.
+ */
+static int
+checkcrid(int crid)
+{
+	int hid = crid & ~(CRYPTOCAP_F_SOFTWARE | CRYPTOCAP_F_HARDWARE);
+	int typ = crid & (CRYPTOCAP_F_SOFTWARE | CRYPTOCAP_F_HARDWARE);
+	int caps = 0;
+	
+	/* if the user hasn't selected a driver, then just call newsession */
+	if (hid == 0 && typ != 0)
+		return 0;
+
+	caps = crypto_getcaps(hid);
+
+	/* didn't find anything with capabilities */
+	if (caps == 0) {
+		dprintk("%s: hid=%x typ=%x not matched\n", __FUNCTION__, hid, typ);
+		return EINVAL;
+	}
+	
+	/* the user didn't specify SW or HW, so the driver is ok */
+	if (typ == 0)
+		return 0;
+
+	/* if the type specified didn't match */
+	if (typ != (caps & (CRYPTOCAP_F_SOFTWARE | CRYPTOCAP_F_HARDWARE))) {
+		dprintk("%s: hid=%x typ=%x caps=%x not matched\n", __FUNCTION__,
+				hid, typ, caps);
+		return EINVAL;
+	}
+
+	return 0;
+}
+
+static int
+cryptodev_op(struct csession *cse, struct crypt_op *cop)
+{
+	struct cryptop *crp = NULL;
+	struct cryptodesc *crde = NULL, *crda = NULL;
+	int error = 0;
+
+	dprintk("%s()\n", __FUNCTION__);
+	if (cop->len > CRYPTO_MAX_DATA_LEN) {
+		dprintk("%s: %d > %d\n", __FUNCTION__, cop->len, CRYPTO_MAX_DATA_LEN);
+		return (E2BIG);
+	}
+
+	if (cse->info.blocksize && (cop->len % cse->info.blocksize) != 0) {
+		dprintk("%s: blocksize=%d len=%d\n", __FUNCTION__, cse->info.blocksize,
+				cop->len);
+		return (EINVAL);
+	}
+
+	cse->uio.uio_iov = &cse->iovec;
+	cse->uio.uio_iovcnt = 1;
+	cse->uio.uio_offset = 0;
+#if 0
+	cse->uio.uio_resid = cop->len;
+	cse->uio.uio_segflg = UIO_SYSSPACE;
+	cse->uio.uio_rw = UIO_WRITE;
+	cse->uio.uio_td = td;
+#endif
+	cse->uio.uio_iov[0].iov_len = cop->len;
+	if (cse->info.authsize)
+		cse->uio.uio_iov[0].iov_len += cse->info.authsize;
+	cse->uio.uio_iov[0].iov_base = kmalloc(cse->uio.uio_iov[0].iov_len,
+			GFP_KERNEL);
+
+	if (cse->uio.uio_iov[0].iov_base == NULL) {
+		dprintk("%s: iov_base kmalloc(%d) failed\n", __FUNCTION__,
+				(int)cse->uio.uio_iov[0].iov_len);
+		return (ENOMEM);
+	}
+
+	crp = crypto_getreq((cse->info.blocksize != 0) + (cse->info.authsize != 0));
+	if (crp == NULL) {
+		dprintk("%s: ENOMEM\n", __FUNCTION__);
+		error = ENOMEM;
+		goto bail;
+	}
+
+	if (cse->info.authsize && cse->info.blocksize) {
+		if (cop->op == COP_ENCRYPT) {
+			crde = crp->crp_desc;
+			crda = crde->crd_next;
+		} else {
+			crda = crp->crp_desc;
+			crde = crda->crd_next;
+		}
+	} else if (cse->info.authsize) {
+		crda = crp->crp_desc;
+	} else if (cse->info.blocksize) {
+		crde = crp->crp_desc;
+	} else {
+		dprintk("%s: bad request\n", __FUNCTION__);
+		error = EINVAL;
+		goto bail;
+	}
+
+	if ((error = copy_from_user(cse->uio.uio_iov[0].iov_base, cop->src,
+					cop->len))) {
+		dprintk("%s: bad copy\n", __FUNCTION__);
+		goto bail;
+	}
+
+	if (crda) {
+		crda->crd_skip = 0;
+		crda->crd_len = cop->len;
+		crda->crd_inject = cop->len;
+
+		crda->crd_alg = cse->mac;
+		crda->crd_key = cse->mackey;
+		crda->crd_klen = cse->mackeylen * 8;
+	}
+
+	if (crde) {
+		if (cop->op == COP_ENCRYPT)
+			crde->crd_flags |= CRD_F_ENCRYPT;
+		else
+			crde->crd_flags &= ~CRD_F_ENCRYPT;
+		crde->crd_len = cop->len;
+		crde->crd_inject = 0;
+
+		crde->crd_alg = cse->cipher;
+		crde->crd_key = cse->key;
+		crde->crd_klen = cse->keylen * 8;
+	}
+
+	crp->crp_ilen = cse->uio.uio_iov[0].iov_len;
+	crp->crp_flags = CRYPTO_F_IOV | CRYPTO_F_CBIMM
+		       | (cop->flags & COP_F_BATCH);
+	crp->crp_buf = (caddr_t)&cse->uio;
+	crp->crp_callback = (int (*) (struct cryptop *)) cryptodev_cb;
+	crp->crp_sid = cse->sid;
+	crp->crp_opaque = (void *)cse;
+
+	if (cop->iv) {
+		if (crde == NULL) {
+			error = EINVAL;
+			dprintk("%s no crde\n", __FUNCTION__);
+			goto bail;
+		}
+		if (cse->cipher == CRYPTO_ARC4) { /* XXX use flag? */
+			error = EINVAL;
+			dprintk("%s arc4 with IV\n", __FUNCTION__);
+			goto bail;
+		}
+		if ((error = copy_from_user(cse->tmp_iv, cop->iv,
+						cse->info.blocksize))) {
+			dprintk("%s bad iv copy\n", __FUNCTION__);
+			goto bail;
+		}
+		memcpy(crde->crd_iv, cse->tmp_iv, cse->info.blocksize);
+		crde->crd_flags |= CRD_F_IV_EXPLICIT | CRD_F_IV_PRESENT;
+		crde->crd_skip = 0;
+	} else if (cse->cipher == CRYPTO_ARC4) { /* XXX use flag? */
+		crde->crd_skip = 0;
+	} else if (crde) {
+		crde->crd_flags |= CRD_F_IV_PRESENT;
+		crde->crd_skip = cse->info.blocksize;
+		crde->crd_len -= cse->info.blocksize;
+	}
+
+	if (cop->mac && crda == NULL) {
+		error = EINVAL;
+		dprintk("%s no crda\n", __FUNCTION__);
+		goto bail;
+	}
+
+	/*
+	 * Let the dispatch run unlocked, then, interlock against the
+	 * callback before checking if the operation completed and going
+	 * to sleep.  This insures drivers don't inherit our lock which
+	 * results in a lock order reversal between crypto_dispatch forced
+	 * entry and the crypto_done callback into us.
+	 */
+	error = crypto_dispatch(crp);
+	if (error) {
+		dprintk("%s error in crypto_dispatch\n", __FUNCTION__);
+		goto bail;
+	}
+
+	dprintk("%s about to WAIT\n", __FUNCTION__);
+	/*
+	 * we really need to wait for driver to complete to maintain
+	 * state,  luckily interrupts will be remembered
+	 */
+	do {
+		error = wait_event_interruptible(crp->crp_waitq,
+				((crp->crp_flags & CRYPTO_F_DONE) != 0));
+		/*
+		 * we can't break out of this loop or we will leave behind
+		 * a huge mess,  however,  staying here means if your driver
+		 * is broken user applications can hang and not be killed.
+		 * The solution,  fix your driver :-)
+		 */
+		if (error) {
+			schedule();
+			error = 0;
+		}
+	} while ((crp->crp_flags & CRYPTO_F_DONE) == 0);
+	dprintk("%s finished WAITING error=%d\n", __FUNCTION__, error);
+
+	if (crp->crp_etype != 0) {
+		error = crp->crp_etype;
+		dprintk("%s error in crp processing\n", __FUNCTION__);
+		goto bail;
+	}
+
+	if (cse->error) {
+		error = cse->error;
+		dprintk("%s error in cse processing\n", __FUNCTION__);
+		goto bail;
+	}
+
+	if (cop->dst && (error = copy_to_user(cop->dst,
+					cse->uio.uio_iov[0].iov_base, cop->len))) {
+		dprintk("%s bad dst copy\n", __FUNCTION__);
+		goto bail;
+	}
+
+	if (cop->mac &&
+			(error=copy_to_user(cop->mac,
+				(caddr_t)cse->uio.uio_iov[0].iov_base + cop->len,
+				cse->info.authsize))) {
+		dprintk("%s bad mac copy\n", __FUNCTION__);
+		goto bail;
+	}
+
+bail:
+	if (crp)
+		crypto_freereq(crp);
+	if (cse->uio.uio_iov[0].iov_base)
+		kfree(cse->uio.uio_iov[0].iov_base);
+
+	return (error);
+}
+
+static int
+cryptodev_cb(void *op)
+{
+	struct cryptop *crp = (struct cryptop *) op;
+	struct csession *cse = (struct csession *)crp->crp_opaque;
+	int error;
+
+	dprintk("%s()\n", __FUNCTION__);
+	error = crp->crp_etype;
+	if (error == EAGAIN) {
+		crp->crp_flags &= ~CRYPTO_F_DONE;
+#ifdef NOTYET
+		/*
+		 * DAVIDM I am fairly sure that we should turn this into a batch
+		 * request to stop bad karma/lockup, revisit
+		 */
+		crp->crp_flags |= CRYPTO_F_BATCH;
+#endif
+		return crypto_dispatch(crp);
+	}
+	if (error != 0 || (crp->crp_flags & CRYPTO_F_DONE)) {
+		cse->error = error;
+		wake_up_interruptible(&crp->crp_waitq);
+	}
+	return (0);
+}
+
+static int
+cryptodevkey_cb(void *op)
+{
+	struct cryptkop *krp = (struct cryptkop *) op;
+	dprintk("%s()\n", __FUNCTION__);
+	wake_up_interruptible(&krp->krp_waitq);
+	return (0);
+}
+
+static int
+cryptodev_key(struct crypt_kop *kop)
+{
+	struct cryptkop *krp = NULL;
+	int error = EINVAL;
+	int in, out, size, i;
+
+	dprintk("%s()\n", __FUNCTION__);
+	if (kop->crk_iparams + kop->crk_oparams > CRK_MAXPARAM) {
+		dprintk("%s params too big\n", __FUNCTION__);
+		return (EFBIG);
+	}
+
+	in = kop->crk_iparams;
+	out = kop->crk_oparams;
+	switch (kop->crk_op) {
+	case CRK_MOD_EXP:
+		if (in == 3 && out == 1)
+			break;
+		return (EINVAL);
+	case CRK_MOD_EXP_CRT:
+		if (in == 6 && out == 1)
+			break;
+		return (EINVAL);
+	case CRK_DSA_SIGN:
+		if (in == 5 && out == 2)
+			break;
+		return (EINVAL);
+	case CRK_DSA_VERIFY:
+		if (in == 7 && out == 0)
+			break;
+		return (EINVAL);
+	case CRK_DH_COMPUTE_KEY:
+		if (in == 3 && out == 1)
+			break;
+		return (EINVAL);
+	default:
+		return (EINVAL);
+	}
+
+	krp = (struct cryptkop *)kmalloc(sizeof *krp, GFP_KERNEL);
+	if (!krp)
+		return (ENOMEM);
+	bzero(krp, sizeof *krp);
+	krp->krp_op = kop->crk_op;
+	krp->krp_status = kop->crk_status;
+	krp->krp_iparams = kop->crk_iparams;
+	krp->krp_oparams = kop->crk_oparams;
+	krp->krp_crid = kop->crk_crid;
+	krp->krp_status = 0;
+	krp->krp_flags = CRYPTO_KF_CBIMM;
+	krp->krp_callback = (int (*) (struct cryptkop *)) cryptodevkey_cb;
+	init_waitqueue_head(&krp->krp_waitq);
+
+	for (i = 0; i < CRK_MAXPARAM; i++)
+		krp->krp_param[i].crp_nbits = kop->crk_param[i].crp_nbits;
+	for (i = 0; i < krp->krp_iparams + krp->krp_oparams; i++) {
+		size = (krp->krp_param[i].crp_nbits + 7) / 8;
+		if (size == 0)
+			continue;
+		krp->krp_param[i].crp_p = (caddr_t) kmalloc(size, GFP_KERNEL);
+		if (i >= krp->krp_iparams)
+			continue;
+		error = copy_from_user(krp->krp_param[i].crp_p,
+				kop->crk_param[i].crp_p, size);
+		if (error)
+			goto fail;
+	}
+
+	error = crypto_kdispatch(krp);
+	if (error)
+		goto fail;
+
+	do {
+		error = wait_event_interruptible(krp->krp_waitq,
+				((krp->krp_flags & CRYPTO_KF_DONE) != 0));
+		/*
+		 * we can't break out of this loop or we will leave behind
+		 * a huge mess,  however,  staying here means if your driver
+		 * is broken user applications can hang and not be killed.
+		 * The solution,  fix your driver :-)
+		 */
+		if (error) {
+			schedule();
+			error = 0;
+		}
+	} while ((krp->krp_flags & CRYPTO_KF_DONE) == 0);
+
+	dprintk("%s finished WAITING error=%d\n", __FUNCTION__, error);
+	
+	kop->crk_crid = krp->krp_crid;		/* device that did the work */
+	if (krp->krp_status != 0) {
+		error = krp->krp_status;
+		goto fail;
+	}
+
+	for (i = krp->krp_iparams; i < krp->krp_iparams + krp->krp_oparams; i++) {
+		size = (krp->krp_param[i].crp_nbits + 7) / 8;
+		if (size == 0)
+			continue;
+		error = copy_to_user(kop->crk_param[i].crp_p, krp->krp_param[i].crp_p,
+				size);
+		if (error)
+			goto fail;
+	}
+
+fail:
+	if (krp) {
+		kop->crk_status = krp->krp_status;
+		for (i = 0; i < CRK_MAXPARAM; i++) {
+			if (krp->krp_param[i].crp_p)
+				kfree(krp->krp_param[i].crp_p);
+		}
+		kfree(krp);
+	}
+	return (error);
+}
+
+static int
+cryptodev_find(struct crypt_find_op *find)
+{
+	device_t dev;
+
+	if (find->crid != -1) {
+		dev = crypto_find_device_byhid(find->crid);
+		if (dev == NULL)
+			return (ENOENT);
+		strlcpy(find->name, device_get_nameunit(dev),
+		    sizeof(find->name));
+	} else {
+		find->crid = crypto_find_driver(find->name);
+		if (find->crid == -1)
+			return (ENOENT);
+	}
+	return (0);
+}
+
+static struct csession *
+csefind(struct fcrypt *fcr, u_int ses)
+{
+	struct csession *cse;
+
+	dprintk("%s()\n", __FUNCTION__);
+	list_for_each_entry(cse, &fcr->csessions, list)
+		if (cse->ses == ses)
+			return (cse);
+	return (NULL);
+}
+
+static int
+csedelete(struct fcrypt *fcr, struct csession *cse_del)
+{
+	struct csession *cse;
+
+	dprintk("%s()\n", __FUNCTION__);
+	list_for_each_entry(cse, &fcr->csessions, list) {
+		if (cse == cse_del) {
+			list_del(&cse->list);
+			return (1);
+		}
+	}
+	return (0);
+}
+	
+static struct csession *
+cseadd(struct fcrypt *fcr, struct csession *cse)
+{
+	dprintk("%s()\n", __FUNCTION__);
+	list_add_tail(&cse->list, &fcr->csessions);
+	cse->ses = fcr->sesn++;
+	return (cse);
+}
+
+static struct csession *
+csecreate(struct fcrypt *fcr, u_int64_t sid, struct cryptoini *crie,
+	struct cryptoini *cria, struct csession_info *info)
+{
+	struct csession *cse;
+
+	dprintk("%s()\n", __FUNCTION__);
+	cse = (struct csession *) kmalloc(sizeof(struct csession), GFP_KERNEL);
+	if (cse == NULL)
+		return NULL;
+	memset(cse, 0, sizeof(struct csession));
+
+	INIT_LIST_HEAD(&cse->list);
+	init_waitqueue_head(&cse->waitq);
+
+	cse->key = crie->cri_key;
+	cse->keylen = crie->cri_klen/8;
+	cse->mackey = cria->cri_key;
+	cse->mackeylen = cria->cri_klen/8;
+	cse->sid = sid;
+	cse->cipher = crie->cri_alg;
+	cse->mac = cria->cri_alg;
+	cse->info = *info;
+	cseadd(fcr, cse);
+	return (cse);
+}
+
+static int
+csefree(struct csession *cse)
+{
+	int error;
+
+	dprintk("%s()\n", __FUNCTION__);
+	error = crypto_freesession(cse->sid);
+	if (cse->key)
+		kfree(cse->key);
+	if (cse->mackey)
+		kfree(cse->mackey);
+	kfree(cse);
+	return(error);
+}
+
+static int
+cryptodev_ioctl(
+	struct inode *inode,
+	struct file *filp,
+	unsigned int cmd,
+	unsigned long arg)
+{
+	struct cryptoini cria, crie;
+	struct fcrypt *fcr = filp->private_data;
+	struct csession *cse;
+	struct csession_info info;
+	struct session2_op sop;
+	struct crypt_op cop;
+	struct crypt_kop kop;
+	struct crypt_find_op fop;
+	u_int64_t sid;
+	u_int32_t ses = 0;
+	int feat, fd, error = 0, crid;
+	mm_segment_t fs;
+
+	dprintk("%s(cmd=%x arg=%lx)\n", __FUNCTION__, cmd, arg);
+
+	switch (cmd) {
+
+	case CRIOGET: {
+		dprintk("%s(CRIOGET)\n", __FUNCTION__);
+		fs = get_fs();
+		set_fs(get_ds());
+		for (fd = 0; fd < files_fdtable(current->files)->max_fds; fd++)
+			if (files_fdtable(current->files)->fd[fd] == filp)
+				break;
+		fd = sys_dup(fd);
+		set_fs(fs);
+		put_user(fd, (int *) arg);
+		return IS_ERR_VALUE(fd) ? fd : 0;
+		}
+
+#define	CIOCGSESSSTR	(cmd == CIOCGSESSION ? "CIOCGSESSION" : "CIOCGSESSION2")
+	case CIOCGSESSION:
+	case CIOCGSESSION2:
+		dprintk("%s(%s)\n", __FUNCTION__, CIOCGSESSSTR);
+		memset(&crie, 0, sizeof(crie));
+		memset(&cria, 0, sizeof(cria));
+		memset(&info, 0, sizeof(info));
+		memset(&sop, 0, sizeof(sop));
+
+		if (copy_from_user(&sop, (void*)arg, (cmd == CIOCGSESSION) ?
+					sizeof(struct session_op) : sizeof(sop))) {
+			dprintk("%s(%s) - bad copy\n", __FUNCTION__, CIOCGSESSSTR);
+			error = EFAULT;
+			goto bail;
+		}
+
+		switch (sop.cipher) {
+		case 0:
+			dprintk("%s(%s) - no cipher\n", __FUNCTION__, CIOCGSESSSTR);
+			break;
+		case CRYPTO_NULL_CBC:
+			info.blocksize = NULL_BLOCK_LEN;
+			info.minkey = NULL_MIN_KEY_LEN;
+			info.maxkey = NULL_MAX_KEY_LEN;
+			break;
+		case CRYPTO_DES_CBC:
+			info.blocksize = DES_BLOCK_LEN;
+			info.minkey = DES_MIN_KEY_LEN;
+			info.maxkey = DES_MAX_KEY_LEN;
+			break;
+		case CRYPTO_3DES_CBC:
+			info.blocksize = DES3_BLOCK_LEN;
+			info.minkey = DES3_MIN_KEY_LEN;
+			info.maxkey = DES3_MAX_KEY_LEN;
+			break;
+		case CRYPTO_BLF_CBC:
+			info.blocksize = BLOWFISH_BLOCK_LEN;
+			info.minkey = BLOWFISH_MIN_KEY_LEN;
+			info.maxkey = BLOWFISH_MAX_KEY_LEN;
+			break;
+		case CRYPTO_CAST_CBC:
+			info.blocksize = CAST128_BLOCK_LEN;
+			info.minkey = CAST128_MIN_KEY_LEN;
+			info.maxkey = CAST128_MAX_KEY_LEN;
+			break;
+		case CRYPTO_SKIPJACK_CBC:
+			info.blocksize = SKIPJACK_BLOCK_LEN;
+			info.minkey = SKIPJACK_MIN_KEY_LEN;
+			info.maxkey = SKIPJACK_MAX_KEY_LEN;
+			break;
+		case CRYPTO_AES_CBC:
+			info.blocksize = AES_BLOCK_LEN;
+			info.minkey = AES_MIN_KEY_LEN;
+			info.maxkey = AES_MAX_KEY_LEN;
+			break;
+		case CRYPTO_ARC4:
+			info.blocksize = ARC4_BLOCK_LEN;
+			info.minkey = ARC4_MIN_KEY_LEN;
+			info.maxkey = ARC4_MAX_KEY_LEN;
+			break;
+		case CRYPTO_CAMELLIA_CBC:
+			info.blocksize = CAMELLIA_BLOCK_LEN;
+			info.minkey = CAMELLIA_MIN_KEY_LEN;
+			info.maxkey = CAMELLIA_MAX_KEY_LEN;
+			break;
+		default:
+			dprintk("%s(%s) - bad cipher\n", __FUNCTION__, CIOCGSESSSTR);
+			error = EINVAL;
+			goto bail;
+		}
+
+		switch (sop.mac) {
+		case 0:
+			dprintk("%s(%s) - no mac\n", __FUNCTION__, CIOCGSESSSTR);
+			break;
+		case CRYPTO_NULL_HMAC:
+			info.authsize = NULL_HASH_LEN;
+			break;
+		case CRYPTO_MD5:
+			info.authsize = MD5_HASH_LEN;
+			break;
+		case CRYPTO_SHA1:
+			info.authsize = SHA1_HASH_LEN;
+			break;
+		case CRYPTO_SHA2_256:
+			info.authsize = SHA2_256_HASH_LEN;
+			break;
+		case CRYPTO_SHA2_384:
+			info.authsize = SHA2_384_HASH_LEN;
+  			break;
+		case CRYPTO_SHA2_512:
+			info.authsize = SHA2_512_HASH_LEN;
+			break;
+		case CRYPTO_RIPEMD160:
+			info.authsize = RIPEMD160_HASH_LEN;
+			break;
+		case CRYPTO_MD5_HMAC:
+			info.authsize = MD5_HASH_LEN;
+			info.authkey = 16;
+			break;
+		case CRYPTO_SHA1_HMAC:
+			info.authsize = SHA1_HASH_LEN;
+			info.authkey = 20;
+			break;
+		case CRYPTO_SHA2_256_HMAC:
+			info.authsize = SHA2_256_HASH_LEN;
+			info.authkey = 32;
+			break;
+		case CRYPTO_SHA2_384_HMAC:
+			info.authsize = SHA2_384_HASH_LEN;
+			info.authkey = 48;
+  			break;
+		case CRYPTO_SHA2_512_HMAC:
+			info.authsize = SHA2_512_HASH_LEN;
+			info.authkey = 64;
+			break;
+		case CRYPTO_RIPEMD160_HMAC:
+			info.authsize = RIPEMD160_HASH_LEN;
+			info.authkey = 20;
+			break;
+		default:
+			dprintk("%s(%s) - bad mac\n", __FUNCTION__, CIOCGSESSSTR);
+			error = EINVAL;
+			goto bail;
+		}
+
+		if (info.blocksize) {
+			crie.cri_alg = sop.cipher;
+			crie.cri_klen = sop.keylen * 8;
+			if ((info.maxkey && sop.keylen > info.maxkey) ||
+				   	sop.keylen < info.minkey) {
+				dprintk("%s(%s) - bad key\n", __FUNCTION__, CIOCGSESSSTR);
+				error = EINVAL;
+				goto bail;
+			}
+
+			crie.cri_key = (u_int8_t *) kmalloc(crie.cri_klen/8+1, GFP_KERNEL);
+			if (copy_from_user(crie.cri_key, sop.key,
+							crie.cri_klen/8)) {
+				dprintk("%s(%s) - bad copy\n", __FUNCTION__, CIOCGSESSSTR);
+				error = EFAULT;
+				goto bail;
+			}
+			if (info.authsize)
+				crie.cri_next = &cria;
+		}
+
+		if (info.authsize) {
+			cria.cri_alg = sop.mac;
+			cria.cri_klen = sop.mackeylen * 8;
+			if (info.authkey && sop.mackeylen != info.authkey) {
+				dprintk("%s(%s) - mackeylen %d != %d\n", __FUNCTION__,
+						CIOCGSESSSTR, sop.mackeylen, info.authkey);
+				error = EINVAL;
+				goto bail;
+			}
+
+			if (cria.cri_klen) {
+				cria.cri_key = (u_int8_t *) kmalloc(cria.cri_klen/8,GFP_KERNEL);
+				if (copy_from_user(cria.cri_key, sop.mackey,
+								cria.cri_klen / 8)) {
+					dprintk("%s(%s) - bad copy\n", __FUNCTION__, CIOCGSESSSTR);
+					error = EFAULT;
+					goto bail;
+				}
+			}
+		}
+
+		/* NB: CIOGSESSION2 has the crid */
+		if (cmd == CIOCGSESSION2) {
+			crid = sop.crid;
+			error = checkcrid(crid);
+			if (error) {
+				dprintk("%s(%s) - checkcrid %x\n", __FUNCTION__,
+						CIOCGSESSSTR, error);
+				goto bail;
+			}
+		} else {
+			/* allow either HW or SW to be used */
+			crid = CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SOFTWARE;
+		}
+		error = crypto_newsession(&sid, (info.blocksize ? &crie : &cria), crid);
+		if (error) {
+			dprintk("%s(%s) - newsession %d\n",__FUNCTION__,CIOCGSESSSTR,error);
+			goto bail;
+		}
+
+		cse = csecreate(fcr, sid, &crie, &cria, &info);
+		if (cse == NULL) {
+			crypto_freesession(sid);
+			error = EINVAL;
+			dprintk("%s(%s) - csecreate failed\n", __FUNCTION__, CIOCGSESSSTR);
+			goto bail;
+		}
+		sop.ses = cse->ses;
+
+		if (cmd == CIOCGSESSION2) {
+			/* return hardware/driver id */
+			sop.crid = CRYPTO_SESID2HID(cse->sid);
+		}
+
+		if (copy_to_user((void*)arg, &sop, (cmd == CIOCGSESSION) ?
+					sizeof(struct session_op) : sizeof(sop))) {
+			dprintk("%s(%s) - bad copy\n", __FUNCTION__, CIOCGSESSSTR);
+			error = EFAULT;
+		}
+bail:
+		if (error) {
+			dprintk("%s(%s) - bail %d\n", __FUNCTION__, CIOCGSESSSTR, error);
+			if (crie.cri_key)
+				kfree(crie.cri_key);
+			if (cria.cri_key)
+				kfree(cria.cri_key);
+		}
+		break;
+	case CIOCFSESSION:
+		dprintk("%s(CIOCFSESSION)\n", __FUNCTION__);
+		get_user(ses, (uint32_t*)arg);
+		cse = csefind(fcr, ses);
+		if (cse == NULL) {
+			error = EINVAL;
+			dprintk("%s(CIOCFSESSION) - Fail %d\n", __FUNCTION__, error);
+			break;
+		}
+		csedelete(fcr, cse);
+		error = csefree(cse);
+		break;
+	case CIOCCRYPT:
+		dprintk("%s(CIOCCRYPT)\n", __FUNCTION__);
+		if(copy_from_user(&cop, (void*)arg, sizeof(cop))) {
+			dprintk("%s(CIOCCRYPT) - bad copy\n", __FUNCTION__);
+			error = EFAULT;
+			goto bail;
+		}
+		cse = csefind(fcr, cop.ses);
+		if (cse == NULL) {
+			error = EINVAL;
+			dprintk("%s(CIOCCRYPT) - Fail %d\n", __FUNCTION__, error);
+			break;
+		}
+		error = cryptodev_op(cse, &cop);
+		if(copy_to_user((void*)arg, &cop, sizeof(cop))) {
+			dprintk("%s(CIOCCRYPT) - bad return copy\n", __FUNCTION__);
+			error = EFAULT;
+			goto bail;
+		}
+		break;
+	case CIOCKEY:
+	case CIOCKEY2:
+		dprintk("%s(CIOCKEY)\n", __FUNCTION__);
+		if (!crypto_userasymcrypto)
+			return (EPERM);		/* XXX compat? */
+		if(copy_from_user(&kop, (void*)arg, sizeof(kop))) {
+			dprintk("%s(CIOCKEY) - bad copy\n", __FUNCTION__);
+			error = EFAULT;
+			goto bail;
+		}
+		if (cmd == CIOCKEY) {
+			/* NB: crypto core enforces s/w driver use */
+			kop.crk_crid =
+			    CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SOFTWARE;
+		}
+		error = cryptodev_key(&kop);
+		if(copy_to_user((void*)arg, &kop, sizeof(kop))) {
+			dprintk("%s(CIOCGKEY) - bad return copy\n", __FUNCTION__);
+			error = EFAULT;
+			goto bail;
+		}
+		break;
+	case CIOCASYMFEAT:
+		dprintk("%s(CIOCASYMFEAT)\n", __FUNCTION__);
+		if (!crypto_userasymcrypto) {
+			/*
+			 * NB: if user asym crypto operations are
+			 * not permitted return "no algorithms"
+			 * so well-behaved applications will just
+			 * fallback to doing them in software.
+			 */
+			feat = 0;
+		} else
+			error = crypto_getfeat(&feat);
+		if (!error) {
+		  error = copy_to_user((void*)arg, &feat, sizeof(feat));
+		}
+		break;
+	case CIOCFINDDEV:
+		if (copy_from_user(&fop, (void*)arg, sizeof(fop))) {
+			dprintk("%s(CIOCFINDDEV) - bad copy\n", __FUNCTION__);
+			error = EFAULT;
+			goto bail;
+		}
+		error = cryptodev_find(&fop);
+		if (copy_to_user((void*)arg, &fop, sizeof(fop))) {
+			dprintk("%s(CIOCFINDDEV) - bad return copy\n", __FUNCTION__);
+			error = EFAULT;
+			goto bail;
+		}
+		break;
+	default:
+		dprintk("%s(unknown ioctl 0x%x)\n", __FUNCTION__, cmd);
+		error = EINVAL;
+		break;
+	}
+	return(-error);
+}
+
+#ifdef HAVE_UNLOCKED_IOCTL
+static long
+cryptodev_unlocked_ioctl(
+	struct file *filp,
+	unsigned int cmd,
+	unsigned long arg)
+{
+	return cryptodev_ioctl(NULL, filp, cmd, arg);
+}
+#endif
+
+static int
+cryptodev_open(struct inode *inode, struct file *filp)
+{
+	struct fcrypt *fcr;
+
+	dprintk("%s()\n", __FUNCTION__);
+	if (filp->private_data) {
+		printk("cryptodev: Private data already exists !\n");
+		return(0);
+	}
+
+	fcr = kmalloc(sizeof(*fcr), GFP_KERNEL);
+	if (!fcr) {
+		dprintk("%s() - malloc failed\n", __FUNCTION__);
+		return(-ENOMEM);
+	}
+	memset(fcr, 0, sizeof(*fcr));
+
+	INIT_LIST_HEAD(&fcr->csessions);
+	filp->private_data = fcr;
+	return(0);
+}
+
+static int
+cryptodev_release(struct inode *inode, struct file *filp)
+{
+	struct fcrypt *fcr = filp->private_data;
+	struct csession *cse, *tmp;
+
+	dprintk("%s()\n", __FUNCTION__);
+	if (!filp) {
+		printk("cryptodev: No private data on release\n");
+		return(0);
+	}
+
+	list_for_each_entry_safe(cse, tmp, &fcr->csessions, list) {
+		list_del(&cse->list);
+		(void)csefree(cse);
+	}
+	filp->private_data = NULL;
+	kfree(fcr);
+	return(0);
+}
+
+static struct file_operations cryptodev_fops = {
+	.owner = THIS_MODULE,
+	.open = cryptodev_open,
+	.release = cryptodev_release,
+	.ioctl = cryptodev_ioctl,
+#ifdef HAVE_UNLOCKED_IOCTL
+	.unlocked_ioctl = cryptodev_unlocked_ioctl,
+#endif
+};
+
+static struct miscdevice cryptodev = {
+	.minor = CRYPTODEV_MINOR,
+	.name = "crypto",
+	.fops = &cryptodev_fops,
+};
+
+static int __init
+cryptodev_init(void)
+{
+	int rc;
+
+	dprintk("%s(%p)\n", __FUNCTION__, cryptodev_init);
+	rc = misc_register(&cryptodev);
+	if (rc) {
+		printk(KERN_ERR "cryptodev: registration of /dev/crypto failed\n");
+		return(rc);
+	}
+
+	return(0);
+}
+
+static void __exit
+cryptodev_exit(void)
+{
+	dprintk("%s()\n", __FUNCTION__);
+	misc_deregister(&cryptodev);
+}
+
+module_init(cryptodev_init);
+module_exit(cryptodev_exit);
+
+MODULE_LICENSE("BSD");
+MODULE_AUTHOR("David McCullough <david_mccullough@mcafee.com>");
+MODULE_DESCRIPTION("Cryptodev (user interface to OCF)");
diff --git a/target/linux/generic/files/crypto/ocf/cryptodev.h b/target/linux/generic/files/crypto/ocf/cryptodev.h
new file mode 100644
index 0000000000..60323175f2
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/cryptodev.h
@@ -0,0 +1,479 @@
+/*	$FreeBSD: src/sys/opencrypto/cryptodev.h,v 1.25 2007/05/09 19:37:02 gnn Exp $	*/
+/*	$OpenBSD: cryptodev.h,v 1.31 2002/06/11 11:14:29 beck Exp $	*/
+
+/*-
+ * Linux port done by David McCullough <david_mccullough@mcafee.com>
+ * Copyright (C) 2006-2010 David McCullough
+ * Copyright (C) 2004-2005 Intel Corporation.
+ * The license and original author are listed below.
+ *
+ * The author of this code is Angelos D. Keromytis (angelos@cis.upenn.edu)
+ * Copyright (c) 2002-2006 Sam Leffler, Errno Consulting
+ *
+ * This code was written by Angelos D. Keromytis in Athens, Greece, in
+ * February 2000. Network Security Technologies Inc. (NSTI) kindly
+ * supported the development of this code.
+ *
+ * Copyright (c) 2000 Angelos D. Keromytis
+ *
+ * Permission to use, copy, and modify this software with or without fee
+ * is hereby granted, provided that this entire notice is included in
+ * all source code copies of any software which is or includes a copy or
+ * modification of this software.
+ *
+ * THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTY. IN PARTICULAR, NONE OF THE AUTHORS MAKES ANY
+ * REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE
+ * MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR
+ * PURPOSE.
+ *
+ * Copyright (c) 2001 Theo de Raadt
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in the
+ *   documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Effort sponsored in part by the Defense Advanced Research Projects
+ * Agency (DARPA) and Air Force Research Laboratory, Air Force
+ * Materiel Command, USAF, under agreement number F30602-01-2-0537.
+ *
+ */
+
+#ifndef _CRYPTO_CRYPTO_H_
+#define _CRYPTO_CRYPTO_H_
+
+/* Some initial values */
+#define CRYPTO_DRIVERS_INITIAL	4
+#define CRYPTO_SW_SESSIONS	32
+
+/* Hash values */
+#define NULL_HASH_LEN		0
+#define MD5_HASH_LEN		16
+#define SHA1_HASH_LEN		20
+#define RIPEMD160_HASH_LEN	20
+#define SHA2_256_HASH_LEN	32
+#define SHA2_384_HASH_LEN	48
+#define SHA2_512_HASH_LEN	64
+#define MD5_KPDK_HASH_LEN	16
+#define SHA1_KPDK_HASH_LEN	20
+/* Maximum hash algorithm result length */
+#define HASH_MAX_LEN		SHA2_512_HASH_LEN /* Keep this updated */
+
+/* HMAC values */
+#define NULL_HMAC_BLOCK_LEN			1
+#define MD5_HMAC_BLOCK_LEN			64
+#define SHA1_HMAC_BLOCK_LEN			64
+#define RIPEMD160_HMAC_BLOCK_LEN	64
+#define SHA2_256_HMAC_BLOCK_LEN		64
+#define SHA2_384_HMAC_BLOCK_LEN		128
+#define SHA2_512_HMAC_BLOCK_LEN		128
+/* Maximum HMAC block length */
+#define HMAC_MAX_BLOCK_LEN		SHA2_512_HMAC_BLOCK_LEN /* Keep this updated */
+#define HMAC_IPAD_VAL			0x36
+#define HMAC_OPAD_VAL			0x5C
+
+/* Encryption algorithm block sizes */
+#define NULL_BLOCK_LEN			1
+#define DES_BLOCK_LEN			8
+#define DES3_BLOCK_LEN			8
+#define BLOWFISH_BLOCK_LEN		8
+#define SKIPJACK_BLOCK_LEN		8
+#define CAST128_BLOCK_LEN		8
+#define RIJNDAEL128_BLOCK_LEN	16
+#define AES_BLOCK_LEN			RIJNDAEL128_BLOCK_LEN
+#define CAMELLIA_BLOCK_LEN		16
+#define ARC4_BLOCK_LEN			1
+#define EALG_MAX_BLOCK_LEN		AES_BLOCK_LEN /* Keep this updated */
+
+/* Encryption algorithm min and max key sizes */
+#define NULL_MIN_KEY_LEN		0
+#define NULL_MAX_KEY_LEN		0
+#define DES_MIN_KEY_LEN			8
+#define DES_MAX_KEY_LEN			8
+#define DES3_MIN_KEY_LEN		24
+#define DES3_MAX_KEY_LEN		24
+#define BLOWFISH_MIN_KEY_LEN	4
+#define BLOWFISH_MAX_KEY_LEN	56
+#define SKIPJACK_MIN_KEY_LEN	10
+#define SKIPJACK_MAX_KEY_LEN	10
+#define CAST128_MIN_KEY_LEN		5
+#define CAST128_MAX_KEY_LEN		16
+#define RIJNDAEL128_MIN_KEY_LEN	16
+#define RIJNDAEL128_MAX_KEY_LEN	32
+#define AES_MIN_KEY_LEN			RIJNDAEL128_MIN_KEY_LEN
+#define AES_MAX_KEY_LEN			RIJNDAEL128_MAX_KEY_LEN
+#define CAMELLIA_MIN_KEY_LEN	16
+#define CAMELLIA_MAX_KEY_LEN	32
+#define ARC4_MIN_KEY_LEN		1
+#define ARC4_MAX_KEY_LEN		256
+
+/* Max size of data that can be processed */
+#define CRYPTO_MAX_DATA_LEN		64*1024 - 1
+
+#define CRYPTO_ALGORITHM_MIN	1
+#define CRYPTO_DES_CBC			1
+#define CRYPTO_3DES_CBC			2
+#define CRYPTO_BLF_CBC			3
+#define CRYPTO_CAST_CBC			4
+#define CRYPTO_SKIPJACK_CBC		5
+#define CRYPTO_MD5_HMAC			6
+#define CRYPTO_SHA1_HMAC		7
+#define CRYPTO_RIPEMD160_HMAC	8
+#define CRYPTO_MD5_KPDK			9
+#define CRYPTO_SHA1_KPDK		10
+#define CRYPTO_RIJNDAEL128_CBC	11 /* 128 bit blocksize */
+#define CRYPTO_AES_CBC			11 /* 128 bit blocksize -- the same as above */
+#define CRYPTO_ARC4				12
+#define CRYPTO_MD5				13
+#define CRYPTO_SHA1				14
+#define CRYPTO_NULL_HMAC		15
+#define CRYPTO_NULL_CBC			16
+#define CRYPTO_DEFLATE_COMP		17 /* Deflate compression algorithm */
+#define CRYPTO_SHA2_256_HMAC	18
+#define CRYPTO_SHA2_384_HMAC	19
+#define CRYPTO_SHA2_512_HMAC	20
+#define CRYPTO_CAMELLIA_CBC		21
+#define CRYPTO_SHA2_256			22
+#define CRYPTO_SHA2_384			23
+#define CRYPTO_SHA2_512			24
+#define CRYPTO_RIPEMD160		25
+#define CRYPTO_ALGORITHM_MAX	25 /* Keep updated - see below */
+
+/* Algorithm flags */
+#define CRYPTO_ALG_FLAG_SUPPORTED	0x01 /* Algorithm is supported */
+#define CRYPTO_ALG_FLAG_RNG_ENABLE	0x02 /* Has HW RNG for DH/DSA */
+#define CRYPTO_ALG_FLAG_DSA_SHA		0x04 /* Can do SHA on msg */
+
+/*
+ * Crypto driver/device flags.  They can set in the crid
+ * parameter when creating a session or submitting a key
+ * op to affect the device/driver assigned.  If neither
+ * of these are specified then the crid is assumed to hold
+ * the driver id of an existing (and suitable) device that
+ * must be used to satisfy the request.
+ */
+#define CRYPTO_FLAG_HARDWARE	0x01000000	/* hardware accelerated */
+#define CRYPTO_FLAG_SOFTWARE	0x02000000	/* software implementation */
+
+/* NB: deprecated */
+struct session_op {
+	u_int32_t	cipher;		/* ie. CRYPTO_DES_CBC */
+	u_int32_t	mac;		/* ie. CRYPTO_MD5_HMAC */
+
+	u_int32_t	keylen;		/* cipher key */
+	caddr_t		key;
+	int		mackeylen;	/* mac key */
+	caddr_t		mackey;
+
+  	u_int32_t	ses;		/* returns: session # */ 
+};
+
+struct session2_op {
+	u_int32_t	cipher;		/* ie. CRYPTO_DES_CBC */
+	u_int32_t	mac;		/* ie. CRYPTO_MD5_HMAC */
+
+	u_int32_t	keylen;		/* cipher key */
+	caddr_t		key;
+	int		mackeylen;	/* mac key */
+	caddr_t		mackey;
+
+  	u_int32_t	ses;		/* returns: session # */ 
+	int		crid;		/* driver id + flags (rw) */
+	int		pad[4];		/* for future expansion */
+};
+
+struct crypt_op {
+	u_int32_t	ses;
+	u_int16_t	op;		/* i.e. COP_ENCRYPT */
+#define COP_NONE	0
+#define COP_ENCRYPT	1
+#define COP_DECRYPT	2
+	u_int16_t	flags;
+#define	COP_F_BATCH	0x0008		/* Batch op if possible */
+	u_int		len;
+	caddr_t		src, dst;	/* become iov[] inside kernel */
+	caddr_t		mac;		/* must be big enough for chosen MAC */
+	caddr_t		iv;
+};
+
+/*
+ * Parameters for looking up a crypto driver/device by
+ * device name or by id.  The latter are returned for
+ * created sessions (crid) and completed key operations.
+ */
+struct crypt_find_op {
+	int		crid;		/* driver id + flags */
+	char		name[32];	/* device/driver name */
+};
+
+/* bignum parameter, in packed bytes, ... */
+struct crparam {
+	caddr_t		crp_p;
+	u_int		crp_nbits;
+};
+
+#define CRK_MAXPARAM	8
+
+struct crypt_kop {
+	u_int		crk_op;		/* ie. CRK_MOD_EXP or other */
+	u_int		crk_status;	/* return status */
+	u_short		crk_iparams;	/* # of input parameters */
+	u_short		crk_oparams;	/* # of output parameters */
+	u_int		crk_crid;	/* NB: only used by CIOCKEY2 (rw) */
+	struct crparam	crk_param[CRK_MAXPARAM];
+};
+#define CRK_ALGORITM_MIN	0
+#define CRK_MOD_EXP		0
+#define CRK_MOD_EXP_CRT		1
+#define CRK_DSA_SIGN		2
+#define CRK_DSA_VERIFY		3
+#define CRK_DH_COMPUTE_KEY	4
+#define CRK_ALGORITHM_MAX	4 /* Keep updated - see below */
+
+#define CRF_MOD_EXP		(1 << CRK_MOD_EXP)
+#define CRF_MOD_EXP_CRT		(1 << CRK_MOD_EXP_CRT)
+#define CRF_DSA_SIGN		(1 << CRK_DSA_SIGN)
+#define CRF_DSA_VERIFY		(1 << CRK_DSA_VERIFY)
+#define CRF_DH_COMPUTE_KEY	(1 << CRK_DH_COMPUTE_KEY)
+
+/*
+ * done against open of /dev/crypto, to get a cloned descriptor.
+ * Please use F_SETFD against the cloned descriptor.
+ */
+#define CRIOGET		_IOWR('c', 100, u_int32_t)
+#define CRIOASYMFEAT	CIOCASYMFEAT
+#define CRIOFINDDEV	CIOCFINDDEV
+
+/* the following are done against the cloned descriptor */
+#define CIOCGSESSION	_IOWR('c', 101, struct session_op)
+#define CIOCFSESSION	_IOW('c', 102, u_int32_t)
+#define CIOCCRYPT	_IOWR('c', 103, struct crypt_op)
+#define CIOCKEY		_IOWR('c', 104, struct crypt_kop)
+#define CIOCASYMFEAT	_IOR('c', 105, u_int32_t)
+#define CIOCGSESSION2	_IOWR('c', 106, struct session2_op)
+#define CIOCKEY2	_IOWR('c', 107, struct crypt_kop)
+#define CIOCFINDDEV	_IOWR('c', 108, struct crypt_find_op)
+
+struct cryptotstat {
+	struct timespec	acc;		/* total accumulated time */
+	struct timespec	min;		/* min time */
+	struct timespec	max;		/* max time */
+	u_int32_t	count;		/* number of observations */
+};
+
+struct cryptostats {
+	u_int32_t	cs_ops;		/* symmetric crypto ops submitted */
+	u_int32_t	cs_errs;	/* symmetric crypto ops that failed */
+	u_int32_t	cs_kops;	/* asymetric/key ops submitted */
+	u_int32_t	cs_kerrs;	/* asymetric/key ops that failed */
+	u_int32_t	cs_intrs;	/* crypto swi thread activations */
+	u_int32_t	cs_rets;	/* crypto return thread activations */
+	u_int32_t	cs_blocks;	/* symmetric op driver block */
+	u_int32_t	cs_kblocks;	/* symmetric op driver block */
+	/*
+	 * When CRYPTO_TIMING is defined at compile time and the
+	 * sysctl debug.crypto is set to 1, the crypto system will
+	 * accumulate statistics about how long it takes to process
+	 * crypto requests at various points during processing.
+	 */
+	struct cryptotstat cs_invoke;	/* crypto_dipsatch -> crypto_invoke */
+	struct cryptotstat cs_done;	/* crypto_invoke -> crypto_done */
+	struct cryptotstat cs_cb;	/* crypto_done -> callback */
+	struct cryptotstat cs_finis;	/* callback -> callback return */
+
+	u_int32_t	cs_drops;		/* crypto ops dropped due to congestion */
+};
+
+#ifdef __KERNEL__
+
+/* Standard initialization structure beginning */
+struct cryptoini {
+	int		cri_alg;	/* Algorithm to use */
+	int		cri_klen;	/* Key length, in bits */
+	int		cri_mlen;	/* Number of bytes we want from the
+					   entire hash. 0 means all. */
+	caddr_t		cri_key;	/* key to use */
+	u_int8_t	cri_iv[EALG_MAX_BLOCK_LEN];	/* IV to use */
+	struct cryptoini *cri_next;
+};
+
+/* Describe boundaries of a single crypto operation */
+struct cryptodesc {
+	int		crd_skip;	/* How many bytes to ignore from start */
+	int		crd_len;	/* How many bytes to process */
+	int		crd_inject;	/* Where to inject results, if applicable */
+	int		crd_flags;
+
+#define CRD_F_ENCRYPT		0x01	/* Set when doing encryption */
+#define CRD_F_IV_PRESENT	0x02	/* When encrypting, IV is already in
+					   place, so don't copy. */
+#define CRD_F_IV_EXPLICIT	0x04	/* IV explicitly provided */
+#define CRD_F_DSA_SHA_NEEDED	0x08	/* Compute SHA-1 of buffer for DSA */
+#define CRD_F_KEY_EXPLICIT	0x10	/* Key explicitly provided */
+#define CRD_F_COMP		0x0f    /* Set when doing compression */
+
+	struct cryptoini	CRD_INI; /* Initialization/context data */
+#define crd_iv		CRD_INI.cri_iv
+#define crd_key		CRD_INI.cri_key
+#define crd_alg		CRD_INI.cri_alg
+#define crd_klen	CRD_INI.cri_klen
+#define crd_mlen	CRD_INI.cri_mlen
+
+	struct cryptodesc *crd_next;
+};
+
+/* Structure describing complete operation */
+struct cryptop {
+	struct list_head crp_next;
+	wait_queue_head_t crp_waitq;
+
+	u_int64_t	crp_sid;	/* Session ID */
+	int		crp_ilen;	/* Input data total length */
+	int		crp_olen;	/* Result total length */
+
+	int		crp_etype;	/*
+					 * Error type (zero means no error).
+					 * All error codes except EAGAIN
+					 * indicate possible data corruption (as in,
+					 * the data have been touched). On all
+					 * errors, the crp_sid may have changed
+					 * (reset to a new one), so the caller
+					 * should always check and use the new
+					 * value on future requests.
+					 */
+	int		crp_flags;
+
+#define CRYPTO_F_SKBUF		0x0001	/* Input/output are skbuf chains */
+#define CRYPTO_F_IOV		0x0002	/* Input/output are uio */
+#define CRYPTO_F_REL		0x0004	/* Must return data in same place */
+#define CRYPTO_F_BATCH		0x0008	/* Batch op if possible */
+#define CRYPTO_F_CBIMM		0x0010	/* Do callback immediately */
+#define CRYPTO_F_DONE		0x0020	/* Operation completed */
+#define CRYPTO_F_CBIFSYNC	0x0040	/* Do CBIMM if op is synchronous */
+
+	caddr_t		crp_buf;	/* Data to be processed */
+	caddr_t		crp_opaque;	/* Opaque pointer, passed along */
+	struct cryptodesc *crp_desc;	/* Linked list of processing descriptors */
+
+	int (*crp_callback)(struct cryptop *); /* Callback function */
+};
+
+#define CRYPTO_BUF_CONTIG	0x0
+#define CRYPTO_BUF_IOV		0x1
+#define CRYPTO_BUF_SKBUF		0x2
+
+#define CRYPTO_OP_DECRYPT	0x0
+#define CRYPTO_OP_ENCRYPT	0x1
+
+/*
+ * Hints passed to process methods.
+ */
+#define CRYPTO_HINT_MORE	0x1	/* more ops coming shortly */
+
+struct cryptkop {
+	struct list_head krp_next;
+	wait_queue_head_t krp_waitq;
+
+	int		krp_flags;
+#define CRYPTO_KF_DONE		0x0001	/* Operation completed */
+#define CRYPTO_KF_CBIMM		0x0002	/* Do callback immediately */
+
+	u_int		krp_op;		/* ie. CRK_MOD_EXP or other */
+	u_int		krp_status;	/* return status */
+	u_short		krp_iparams;	/* # of input parameters */
+	u_short		krp_oparams;	/* # of output parameters */
+	u_int		krp_crid;	/* desired device, etc. */
+	u_int32_t	krp_hid;
+	struct crparam	krp_param[CRK_MAXPARAM];	/* kvm */
+	int		(*krp_callback)(struct cryptkop *);
+};
+
+#include <ocf-compat.h>
+
+/*
+ * Session ids are 64 bits.  The lower 32 bits contain a "local id" which
+ * is a driver-private session identifier.  The upper 32 bits contain a
+ * "hardware id" used by the core crypto code to identify the driver and
+ * a copy of the driver's capabilities that can be used by client code to
+ * optimize operation.
+ */
+#define CRYPTO_SESID2HID(_sid)	(((_sid) >> 32) & 0x00ffffff)
+#define CRYPTO_SESID2CAPS(_sid)	(((_sid) >> 32) & 0xff000000)
+#define CRYPTO_SESID2LID(_sid)	(((u_int32_t) (_sid)) & 0xffffffff)
+
+extern	int crypto_newsession(u_int64_t *sid, struct cryptoini *cri, int hard);
+extern	int crypto_freesession(u_int64_t sid);
+#define CRYPTOCAP_F_HARDWARE	CRYPTO_FLAG_HARDWARE
+#define CRYPTOCAP_F_SOFTWARE	CRYPTO_FLAG_SOFTWARE
+#define CRYPTOCAP_F_SYNC	0x04000000	/* operates synchronously */
+extern	int32_t crypto_get_driverid(device_t dev, int flags);
+extern	int crypto_find_driver(const char *);
+extern	device_t crypto_find_device_byhid(int hid);
+extern	int crypto_getcaps(int hid);
+extern	int crypto_register(u_int32_t driverid, int alg, u_int16_t maxoplen,
+	    u_int32_t flags);
+extern	int crypto_kregister(u_int32_t, int, u_int32_t);
+extern	int crypto_unregister(u_int32_t driverid, int alg);
+extern	int crypto_unregister_all(u_int32_t driverid);
+extern	int crypto_dispatch(struct cryptop *crp);
+extern	int crypto_kdispatch(struct cryptkop *);
+#define CRYPTO_SYMQ	0x1
+#define CRYPTO_ASYMQ	0x2
+extern	int crypto_unblock(u_int32_t, int);
+extern	void crypto_done(struct cryptop *crp);
+extern	void crypto_kdone(struct cryptkop *);
+extern	int crypto_getfeat(int *);
+
+extern	void crypto_freereq(struct cryptop *crp);
+extern	struct cryptop *crypto_getreq(int num);
+
+extern  int crypto_usercrypto;      /* userland may do crypto requests */
+extern  int crypto_userasymcrypto;  /* userland may do asym crypto reqs */
+extern  int crypto_devallowsoft;    /* only use hardware crypto */
+
+/*
+ * random number support,  crypto_unregister_all will unregister
+ */
+extern int crypto_rregister(u_int32_t driverid,
+		int (*read_random)(void *arg, u_int32_t *buf, int len), void *arg);
+extern int crypto_runregister_all(u_int32_t driverid);
+
+/*
+ * Crypto-related utility routines used mainly by drivers.
+ *
+ * XXX these don't really belong here; but for now they're
+ *     kept apart from the rest of the system.
+ */
+struct uio;
+extern	void cuio_copydata(struct uio* uio, int off, int len, caddr_t cp);
+extern	void cuio_copyback(struct uio* uio, int off, int len, caddr_t cp);
+extern	struct iovec *cuio_getptr(struct uio *uio, int loc, int *off);
+
+extern	void crypto_copyback(int flags, caddr_t buf, int off, int size,
+	    caddr_t in);
+extern	void crypto_copydata(int flags, caddr_t buf, int off, int size,
+	    caddr_t out);
+extern	int crypto_apply(int flags, caddr_t buf, int off, int len,
+	    int (*f)(void *, void *, u_int), void *arg);
+
+#endif /* __KERNEL__ */
+#endif /* _CRYPTO_CRYPTO_H_ */
diff --git a/target/linux/generic/files/crypto/ocf/cryptosoft.c b/target/linux/generic/files/crypto/ocf/cryptosoft.c
new file mode 100644
index 0000000000..52e1570fcc
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/cryptosoft.c
@@ -0,0 +1,1210 @@
+/*
+ * An OCF module that uses the linux kernel cryptoapi, based on the
+ * original cryptosoft for BSD by Angelos D. Keromytis (angelos@cis.upenn.edu)
+ * but is mostly unrecognisable,
+ *
+ * Written by David McCullough <david_mccullough@mcafee.com>
+ * Copyright (C) 2004-2010 David McCullough
+ * Copyright (C) 2004-2005 Intel Corporation.
+ *
+ * LICENSE TERMS
+ *
+ * The free distribution and use of this software in both source and binary
+ * form is allowed (with or without changes) provided that:
+ *
+ *   1. distributions of this source code include the above copyright
+ *      notice, this list of conditions and the following disclaimer;
+ *
+ *   2. distributions in binary form include the above copyright
+ *      notice, this list of conditions and the following disclaimer
+ *      in the documentation and/or other associated materials;
+ *
+ *   3. the copyright holder's name is not used to endorse products
+ *      built using this software without specific written permission.
+ *
+ * ALTERNATIVELY, provided that this notice is retained in full, this product
+ * may be distributed under the terms of the GNU General Public License (GPL),
+ * in which case the provisions of the GPL apply INSTEAD OF those given above.
+ *
+ * DISCLAIMER
+ *
+ * This software is provided 'as is' with no explicit or implied warranties
+ * in respect of its properties, including, but not limited to, correctness
+ * and/or fitness for purpose.
+ * ---------------------------------------------------------------------------
+ */
+
+#ifndef AUTOCONF_INCLUDED
+#include <linux/config.h>
+#endif
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/crypto.h>
+#include <linux/mm.h>
+#include <linux/skbuff.h>
+#include <linux/random.h>
+#include <linux/version.h>
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
+#include <linux/scatterlist.h>
+#endif
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,29)
+#include <crypto/hash.h>
+#endif
+
+#include <cryptodev.h>
+#include <uio.h>
+
+struct {
+	softc_device_decl	sc_dev;
+} swcr_softc;
+
+#define offset_in_page(p) ((unsigned long)(p) & ~PAGE_MASK)
+
+#define SW_TYPE_CIPHER		0x01
+#define SW_TYPE_HMAC		0x02
+#define SW_TYPE_HASH		0x04
+#define SW_TYPE_COMP		0x08
+#define SW_TYPE_BLKCIPHER	0x10
+#define SW_TYPE_ALG_MASK	0x1f
+
+#define SW_TYPE_ASYNC		0x8000
+
+/* We change some of the above if we have an async interface */
+
+#define SW_TYPE_ALG_AMASK	(SW_TYPE_ALG_MASK | SW_TYPE_ASYNC)
+
+#define SW_TYPE_ABLKCIPHER	(SW_TYPE_BLKCIPHER | SW_TYPE_ASYNC)
+#define SW_TYPE_AHASH		(SW_TYPE_HASH | SW_TYPE_ASYNC)
+#define SW_TYPE_AHMAC		(SW_TYPE_HMAC | SW_TYPE_ASYNC)
+
+#define SCATTERLIST_MAX 16
+
+struct swcr_data {
+	int					sw_type;
+	int					sw_alg;
+	struct crypto_tfm	*sw_tfm;
+	union {
+		struct {
+			char *sw_key;
+			int  sw_klen;
+			int  sw_mlen;
+		} hmac;
+		void *sw_comp_buf;
+	} u;
+	struct swcr_data	*sw_next;
+};
+
+struct swcr_req {
+	struct swcr_data	*sw_head;
+	struct swcr_data	*sw;
+	struct cryptop		*crp;
+	struct cryptodesc	*crd;
+	struct scatterlist	 sg[SCATTERLIST_MAX];
+	unsigned char		 iv[EALG_MAX_BLOCK_LEN];
+	char				 result[HASH_MAX_LEN];
+	void				*crypto_req;
+};
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
+static kmem_cache_t *swcr_req_cache;
+#else
+static struct kmem_cache *swcr_req_cache;
+#endif
+
+#ifndef CRYPTO_TFM_MODE_CBC
+/*
+ * As of linux-2.6.21 this is no longer defined, and presumably no longer
+ * needed to be passed into the crypto core code.
+ */
+#define	CRYPTO_TFM_MODE_CBC	0
+#define	CRYPTO_TFM_MODE_ECB	0
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)
+	/*
+	 * Linux 2.6.19 introduced a new Crypto API, setup macro's to convert new
+	 * API into old API.
+	 */
+
+	/* Symmetric/Block Cipher */
+	struct blkcipher_desc
+	{
+		struct crypto_tfm *tfm;
+		void *info;
+	};
+	#define ecb(X)								#X , CRYPTO_TFM_MODE_ECB
+	#define cbc(X)								#X , CRYPTO_TFM_MODE_CBC
+	#define crypto_has_blkcipher(X, Y, Z)		crypto_alg_available(X, 0)
+	#define crypto_blkcipher_cast(X)			X
+	#define crypto_blkcipher_tfm(X)				X
+	#define crypto_alloc_blkcipher(X, Y, Z)		crypto_alloc_tfm(X, mode)
+	#define crypto_blkcipher_ivsize(X)			crypto_tfm_alg_ivsize(X)
+	#define crypto_blkcipher_blocksize(X)		crypto_tfm_alg_blocksize(X)
+	#define crypto_blkcipher_setkey(X, Y, Z)	crypto_cipher_setkey(X, Y, Z)
+	#define crypto_blkcipher_encrypt_iv(W, X, Y, Z)	\
+				crypto_cipher_encrypt_iv((W)->tfm, X, Y, Z, (u8 *)((W)->info))
+	#define crypto_blkcipher_decrypt_iv(W, X, Y, Z)	\
+				crypto_cipher_decrypt_iv((W)->tfm, X, Y, Z, (u8 *)((W)->info))
+	#define crypto_blkcipher_set_flags(x, y)	/* nop */
+
+	/* Hash/HMAC/Digest */
+	struct hash_desc
+	{
+		struct crypto_tfm *tfm;
+	};
+	#define hmac(X)							#X , 0
+	#define crypto_has_hash(X, Y, Z)		crypto_alg_available(X, 0)
+	#define crypto_hash_cast(X)				X
+	#define crypto_hash_tfm(X)				X
+	#define crypto_alloc_hash(X, Y, Z)		crypto_alloc_tfm(X, mode)
+	#define crypto_hash_digestsize(X)		crypto_tfm_alg_digestsize(X)
+	#define crypto_hash_digest(W, X, Y, Z)	\
+				crypto_digest_digest((W)->tfm, X, sg_num, Z)
+
+	/* Asymmetric Cipher */
+	#define crypto_has_cipher(X, Y, Z)		crypto_alg_available(X, 0)
+
+	/* Compression */
+	#define crypto_has_comp(X, Y, Z)		crypto_alg_available(X, 0)
+	#define crypto_comp_tfm(X)				X
+	#define crypto_comp_cast(X)				X
+	#define crypto_alloc_comp(X, Y, Z)		crypto_alloc_tfm(X, mode)
+	#define plain(X)	#X , 0
+#else
+	#define ecb(X)	"ecb(" #X ")" , 0
+	#define cbc(X)	"cbc(" #X ")" , 0
+	#define hmac(X)	"hmac(" #X ")" , 0
+	#define plain(X)	#X , 0
+#endif /* if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) */
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22)
+/* no ablkcipher in older kernels */
+#define crypto_alloc_ablkcipher(a,b,c)		(NULL)
+#define crypto_ablkcipher_tfm(x)			((struct crypto_tfm *)(x))
+#define crypto_ablkcipher_set_flags(a, b)	/* nop */
+#define crypto_ablkcipher_setkey(x, y, z)	(-EINVAL)
+#define	crypto_has_ablkcipher(a,b,c)		(0)
+#else
+#define	HAVE_ABLKCIPHER
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,32)
+/* no ahash in older kernels */
+#define crypto_ahash_tfm(x)					((struct crypto_tfm *)(x))
+#define	crypto_alloc_ahash(a,b,c)			(NULL)
+#define	crypto_ahash_digestsize(x)			0
+#else
+#define	HAVE_AHASH
+#endif
+
+struct crypto_details {
+	char *alg_name;
+	int mode;
+	int sw_type;
+};
+
+static struct crypto_details crypto_details[] = {
+	[CRYPTO_DES_CBC]         = { cbc(des),          SW_TYPE_BLKCIPHER, },
+	[CRYPTO_3DES_CBC]        = { cbc(des3_ede),     SW_TYPE_BLKCIPHER, },
+	[CRYPTO_BLF_CBC]         = { cbc(blowfish),     SW_TYPE_BLKCIPHER, },
+	[CRYPTO_CAST_CBC]        = { cbc(cast5),        SW_TYPE_BLKCIPHER, },
+	[CRYPTO_SKIPJACK_CBC]    = { cbc(skipjack),     SW_TYPE_BLKCIPHER, },
+	[CRYPTO_MD5_HMAC]        = { hmac(md5),         SW_TYPE_HMAC, },
+	[CRYPTO_SHA1_HMAC]       = { hmac(sha1),        SW_TYPE_HMAC, },
+	[CRYPTO_RIPEMD160_HMAC]  = { hmac(ripemd160),   SW_TYPE_HMAC, },
+	[CRYPTO_MD5_KPDK]        = { plain(md5-kpdk),   SW_TYPE_HASH, },
+	[CRYPTO_SHA1_KPDK]       = { plain(sha1-kpdk),  SW_TYPE_HASH, },
+	[CRYPTO_AES_CBC]         = { cbc(aes),          SW_TYPE_BLKCIPHER, },
+	[CRYPTO_ARC4]            = { ecb(arc4),         SW_TYPE_BLKCIPHER, },
+	[CRYPTO_MD5]             = { plain(md5),        SW_TYPE_HASH, },
+	[CRYPTO_SHA1]            = { plain(sha1),       SW_TYPE_HASH, },
+	[CRYPTO_NULL_HMAC]       = { hmac(digest_null), SW_TYPE_HMAC, },
+	[CRYPTO_NULL_CBC]        = { cbc(cipher_null),  SW_TYPE_BLKCIPHER, },
+	[CRYPTO_DEFLATE_COMP]    = { plain(deflate),    SW_TYPE_COMP, },
+	[CRYPTO_SHA2_256_HMAC]   = { hmac(sha256),      SW_TYPE_HMAC, },
+	[CRYPTO_SHA2_384_HMAC]   = { hmac(sha384),      SW_TYPE_HMAC, },
+	[CRYPTO_SHA2_512_HMAC]   = { hmac(sha512),      SW_TYPE_HMAC, },
+	[CRYPTO_CAMELLIA_CBC]    = { cbc(camellia),     SW_TYPE_BLKCIPHER, },
+	[CRYPTO_SHA2_256]        = { plain(sha256),     SW_TYPE_HASH, },
+	[CRYPTO_SHA2_384]        = { plain(sha384),     SW_TYPE_HASH, },
+	[CRYPTO_SHA2_512]        = { plain(sha512),     SW_TYPE_HASH, },
+	[CRYPTO_RIPEMD160]       = { plain(ripemd160),  SW_TYPE_HASH, },
+};
+
+int32_t swcr_id = -1;
+module_param(swcr_id, int, 0444);
+MODULE_PARM_DESC(swcr_id, "Read-Only OCF ID for cryptosoft driver");
+
+int swcr_fail_if_compression_grows = 1;
+module_param(swcr_fail_if_compression_grows, int, 0644);
+MODULE_PARM_DESC(swcr_fail_if_compression_grows,
+                "Treat compression that results in more data as a failure");
+
+int swcr_no_ahash = 0;
+module_param(swcr_no_ahash, int, 0644);
+MODULE_PARM_DESC(swcr_no_ahash,
+                "Do not use async hash/hmac even if available");
+
+int swcr_no_ablk = 0;
+module_param(swcr_no_ablk, int, 0644);
+MODULE_PARM_DESC(swcr_no_ablk,
+                "Do not use async blk ciphers even if available");
+
+static struct swcr_data **swcr_sessions = NULL;
+static u_int32_t swcr_sesnum = 0;
+
+static	int swcr_process(device_t, struct cryptop *, int);
+static	int swcr_newsession(device_t, u_int32_t *, struct cryptoini *);
+static	int swcr_freesession(device_t, u_int64_t);
+
+static device_method_t swcr_methods = {
+	/* crypto device methods */
+	DEVMETHOD(cryptodev_newsession,	swcr_newsession),
+	DEVMETHOD(cryptodev_freesession,swcr_freesession),
+	DEVMETHOD(cryptodev_process,	swcr_process),
+};
+
+#define debug swcr_debug
+int swcr_debug = 0;
+module_param(swcr_debug, int, 0644);
+MODULE_PARM_DESC(swcr_debug, "Enable debug");
+
+static void swcr_process_req(struct swcr_req *req);
+
+/*
+ * Generate a new software session.
+ */
+static int
+swcr_newsession(device_t dev, u_int32_t *sid, struct cryptoini *cri)
+{
+	struct swcr_data **swd;
+	u_int32_t i;
+	int error;
+	char *algo;
+	int mode;
+
+	dprintk("%s()\n", __FUNCTION__);
+	if (sid == NULL || cri == NULL) {
+		dprintk("%s,%d - EINVAL\n", __FILE__, __LINE__);
+		return EINVAL;
+	}
+
+	if (swcr_sessions) {
+		for (i = 1; i < swcr_sesnum; i++)
+			if (swcr_sessions[i] == NULL)
+				break;
+	} else
+		i = 1;		/* NB: to silence compiler warning */
+
+	if (swcr_sessions == NULL || i == swcr_sesnum) {
+		if (swcr_sessions == NULL) {
+			i = 1; /* We leave swcr_sessions[0] empty */
+			swcr_sesnum = CRYPTO_SW_SESSIONS;
+		} else
+			swcr_sesnum *= 2;
+
+		swd = kmalloc(swcr_sesnum * sizeof(struct swcr_data *), SLAB_ATOMIC);
+		if (swd == NULL) {
+			/* Reset session number */
+			if (swcr_sesnum == CRYPTO_SW_SESSIONS)
+				swcr_sesnum = 0;
+			else
+				swcr_sesnum /= 2;
+			dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__);
+			return ENOBUFS;
+		}
+		memset(swd, 0, swcr_sesnum * sizeof(struct swcr_data *));
+
+		/* Copy existing sessions */
+		if (swcr_sessions) {
+			memcpy(swd, swcr_sessions,
+			    (swcr_sesnum / 2) * sizeof(struct swcr_data *));
+			kfree(swcr_sessions);
+		}
+
+		swcr_sessions = swd;
+	}
+
+	swd = &swcr_sessions[i];
+	*sid = i;
+
+	while (cri) {
+		*swd = (struct swcr_data *) kmalloc(sizeof(struct swcr_data),
+				SLAB_ATOMIC);
+		if (*swd == NULL) {
+			swcr_freesession(NULL, i);
+			dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__);
+			return ENOBUFS;
+		}
+		memset(*swd, 0, sizeof(struct swcr_data));
+
+		if (cri->cri_alg < 0 ||
+				cri->cri_alg>=sizeof(crypto_details)/sizeof(crypto_details[0])){
+			printk("cryptosoft: Unknown algorithm 0x%x\n", cri->cri_alg);
+			swcr_freesession(NULL, i);
+			return EINVAL;
+		}
+
+		algo = crypto_details[cri->cri_alg].alg_name;
+		if (!algo || !*algo) {
+			printk("cryptosoft: Unsupported algorithm 0x%x\n", cri->cri_alg);
+			swcr_freesession(NULL, i);
+			return EINVAL;
+		}
+
+		mode = crypto_details[cri->cri_alg].mode;
+		(*swd)->sw_type = crypto_details[cri->cri_alg].sw_type;
+		(*swd)->sw_alg = cri->cri_alg;
+
+		/* Algorithm specific configuration */
+		switch (cri->cri_alg) {
+		case CRYPTO_NULL_CBC:
+			cri->cri_klen = 0; /* make it work with crypto API */
+			break;
+		default:
+			break;
+		}
+
+		if ((*swd)->sw_type & SW_TYPE_BLKCIPHER) {
+			dprintk("%s crypto_alloc_*blkcipher(%s, 0x%x)\n", __FUNCTION__,
+					algo, mode);
+
+			/* try async first */
+			(*swd)->sw_tfm = swcr_no_ablk ? NULL :
+					crypto_ablkcipher_tfm(crypto_alloc_ablkcipher(algo, 0, 0));
+			if ((*swd)->sw_tfm) {
+				dprintk("%s %s cipher is async\n", __FUNCTION__, algo);
+				(*swd)->sw_type |= SW_TYPE_ASYNC;
+			} else {
+				dprintk("%s %s cipher is sync\n", __FUNCTION__, algo);
+				(*swd)->sw_tfm = crypto_blkcipher_tfm(
+						crypto_alloc_blkcipher(algo, 0, CRYPTO_ALG_ASYNC));
+			}
+			if (!(*swd)->sw_tfm) {
+				dprintk("cryptosoft: crypto_alloc_blkcipher failed(%s, 0x%x)\n",
+						algo,mode);
+				swcr_freesession(NULL, i);
+				return EINVAL;
+			}
+
+			if (debug) {
+				dprintk("%s key:cri->cri_klen=%d,(cri->cri_klen + 7)/8=%d",
+						__FUNCTION__, cri->cri_klen, (cri->cri_klen + 7) / 8);
+				for (i = 0; i < (cri->cri_klen + 7) / 8; i++)
+					dprintk("%s0x%x", (i % 8) ? " " : "\n    ",
+							cri->cri_key[i] & 0xff);
+				dprintk("\n");
+			}
+			if ((*swd)->sw_type & SW_TYPE_ASYNC) {
+				/* OCF doesn't enforce keys */
+				crypto_ablkcipher_set_flags(
+						__crypto_ablkcipher_cast((*swd)->sw_tfm),
+							CRYPTO_TFM_REQ_WEAK_KEY);
+				error = crypto_ablkcipher_setkey(
+							__crypto_ablkcipher_cast((*swd)->sw_tfm),
+								cri->cri_key, (cri->cri_klen + 7) / 8);
+			} else {
+				/* OCF doesn't enforce keys */
+				crypto_blkcipher_set_flags(
+						crypto_blkcipher_cast((*swd)->sw_tfm),
+							CRYPTO_TFM_REQ_WEAK_KEY);
+				error = crypto_blkcipher_setkey(
+							crypto_blkcipher_cast((*swd)->sw_tfm),
+								cri->cri_key, (cri->cri_klen + 7) / 8);
+			}
+			if (error) {
+				printk("cryptosoft: setkey failed %d (crt_flags=0x%x)\n", error,
+						(*swd)->sw_tfm->crt_flags);
+				swcr_freesession(NULL, i);
+				return error;
+			}
+		} else if ((*swd)->sw_type & (SW_TYPE_HMAC | SW_TYPE_HASH)) {
+			dprintk("%s crypto_alloc_*hash(%s, 0x%x)\n", __FUNCTION__,
+					algo, mode);
+
+			/* try async first */
+			(*swd)->sw_tfm = swcr_no_ahash ? NULL :
+					crypto_ahash_tfm(crypto_alloc_ahash(algo, 0, 0));
+			if ((*swd)->sw_tfm) {
+				dprintk("%s %s hash is async\n", __FUNCTION__, algo);
+				(*swd)->sw_type |= SW_TYPE_ASYNC;
+			} else {
+				dprintk("%s %s hash is sync\n", __FUNCTION__, algo);
+				(*swd)->sw_tfm = crypto_hash_tfm(
+						crypto_alloc_hash(algo, 0, CRYPTO_ALG_ASYNC));
+			}
+
+			if (!(*swd)->sw_tfm) {
+				dprintk("cryptosoft: crypto_alloc_hash failed(%s,0x%x)\n",
+						algo, mode);
+				swcr_freesession(NULL, i);
+				return EINVAL;
+			}
+
+			(*swd)->u.hmac.sw_klen = (cri->cri_klen + 7) / 8;
+			(*swd)->u.hmac.sw_key = (char *)kmalloc((*swd)->u.hmac.sw_klen,
+					SLAB_ATOMIC);
+			if ((*swd)->u.hmac.sw_key == NULL) {
+				swcr_freesession(NULL, i);
+				dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__);
+				return ENOBUFS;
+			}
+			memcpy((*swd)->u.hmac.sw_key, cri->cri_key, (*swd)->u.hmac.sw_klen);
+			if (cri->cri_mlen) {
+				(*swd)->u.hmac.sw_mlen = cri->cri_mlen;
+			} else if ((*swd)->sw_type & SW_TYPE_ASYNC) {
+				(*swd)->u.hmac.sw_mlen = crypto_ahash_digestsize(
+						__crypto_ahash_cast((*swd)->sw_tfm));
+			} else  {
+				(*swd)->u.hmac.sw_mlen = crypto_hash_digestsize(
+						crypto_hash_cast((*swd)->sw_tfm));
+			}
+		} else if ((*swd)->sw_type & SW_TYPE_COMP) {
+			(*swd)->sw_tfm = crypto_comp_tfm(
+					crypto_alloc_comp(algo, 0, CRYPTO_ALG_ASYNC));
+			if (!(*swd)->sw_tfm) {
+				dprintk("cryptosoft: crypto_alloc_comp failed(%s,0x%x)\n",
+						algo, mode);
+				swcr_freesession(NULL, i);
+				return EINVAL;
+			}
+			(*swd)->u.sw_comp_buf = kmalloc(CRYPTO_MAX_DATA_LEN, SLAB_ATOMIC);
+			if ((*swd)->u.sw_comp_buf == NULL) {
+				swcr_freesession(NULL, i);
+				dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__);
+				return ENOBUFS;
+			}
+		} else {
+			printk("cryptosoft: Unhandled sw_type %d\n", (*swd)->sw_type);
+			swcr_freesession(NULL, i);
+			return EINVAL;
+		}
+
+		cri = cri->cri_next;
+		swd = &((*swd)->sw_next);
+	}
+	return 0;
+}
+
+/*
+ * Free a session.
+ */
+static int
+swcr_freesession(device_t dev, u_int64_t tid)
+{
+	struct swcr_data *swd;
+	u_int32_t sid = CRYPTO_SESID2LID(tid);
+
+	dprintk("%s()\n", __FUNCTION__);
+	if (sid > swcr_sesnum || swcr_sessions == NULL ||
+			swcr_sessions[sid] == NULL) {
+		dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+		return(EINVAL);
+	}
+
+	/* Silently accept and return */
+	if (sid == 0)
+		return(0);
+
+	while ((swd = swcr_sessions[sid]) != NULL) {
+		swcr_sessions[sid] = swd->sw_next;
+		if (swd->sw_tfm) {
+			switch (swd->sw_type & SW_TYPE_ALG_AMASK) {
+#ifdef HAVE_AHASH
+			case SW_TYPE_AHMAC:
+			case SW_TYPE_AHASH:
+				crypto_free_ahash(__crypto_ahash_cast(swd->sw_tfm));
+				break;
+#endif
+#ifdef HAVE_ABLKCIPHER
+			case SW_TYPE_ABLKCIPHER:
+				crypto_free_ablkcipher(__crypto_ablkcipher_cast(swd->sw_tfm));
+				break;
+#endif
+			case SW_TYPE_BLKCIPHER:
+				crypto_free_blkcipher(crypto_blkcipher_cast(swd->sw_tfm));
+				break;
+			case SW_TYPE_HMAC:
+			case SW_TYPE_HASH:
+				crypto_free_hash(crypto_hash_cast(swd->sw_tfm));
+				break;
+			case SW_TYPE_COMP:
+				crypto_free_comp(crypto_comp_cast(swd->sw_tfm));
+			default:
+				crypto_free_tfm(swd->sw_tfm);
+				break;
+			}
+			swd->sw_tfm = NULL;
+		}
+		if (swd->sw_type & SW_TYPE_COMP) {
+			if (swd->u.sw_comp_buf)
+				kfree(swd->u.sw_comp_buf);
+		} else {
+			if (swd->u.hmac.sw_key)
+				kfree(swd->u.hmac.sw_key);
+		}
+		kfree(swd);
+	}
+	return 0;
+}
+
+#if defined(HAVE_ABLKCIPHER) || defined(HAVE_AHASH)
+/* older kernels had no async interface */
+
+static void swcr_process_callback(struct crypto_async_request *creq, int err)
+{
+	struct swcr_req *req = creq->data;
+
+	dprintk("%s()\n", __FUNCTION__);
+	if (err) {
+		if (err == -EINPROGRESS)
+			return;
+		dprintk("%s() fail %d\n", __FUNCTION__, -err);
+		req->crp->crp_etype = -err;
+		goto done;
+	}
+
+	switch (req->sw->sw_type & SW_TYPE_ALG_AMASK) {
+	case SW_TYPE_AHMAC:
+	case SW_TYPE_AHASH:
+		crypto_copyback(req->crp->crp_flags, req->crp->crp_buf,
+				req->crd->crd_inject, req->sw->u.hmac.sw_mlen, req->result);
+		ahash_request_free(req->crypto_req);
+		break;
+	case SW_TYPE_ABLKCIPHER:
+		ablkcipher_request_free(req->crypto_req);
+		break;
+	default:
+		req->crp->crp_etype = EINVAL;
+		goto done;
+	}
+
+	req->crd = req->crd->crd_next;
+	if (req->crd) {
+		swcr_process_req(req);
+		return;
+	}
+
+done:
+	dprintk("%s crypto_done %p\n", __FUNCTION__, req);
+	crypto_done(req->crp);
+	kmem_cache_free(swcr_req_cache, req);
+}
+#endif /* defined(HAVE_ABLKCIPHER) || defined(HAVE_AHASH) */
+
+
+static void swcr_process_req(struct swcr_req *req)
+{
+	struct swcr_data *sw;
+	struct cryptop *crp = req->crp;
+	struct cryptodesc *crd = req->crd;
+	struct sk_buff *skb = (struct sk_buff *) crp->crp_buf;
+	struct uio *uiop = (struct uio *) crp->crp_buf;
+	int sg_num, sg_len, skip;
+
+	dprintk("%s()\n", __FUNCTION__);
+
+	/*
+	 * Find the crypto context.
+	 *
+	 * XXX Note that the logic here prevents us from having
+	 * XXX the same algorithm multiple times in a session
+	 * XXX (or rather, we can but it won't give us the right
+	 * XXX results). To do that, we'd need some way of differentiating
+	 * XXX between the various instances of an algorithm (so we can
+	 * XXX locate the correct crypto context).
+	 */
+	for (sw = req->sw_head; sw && sw->sw_alg != crd->crd_alg; sw = sw->sw_next)
+		;
+
+	/* No such context ? */
+	if (sw == NULL) {
+		crp->crp_etype = EINVAL;
+		dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+		goto done;
+	}
+
+	req->sw = sw;
+	skip = crd->crd_skip;
+
+	/*
+	 * setup the SG list skip from the start of the buffer
+	 */
+	memset(req->sg, 0, sizeof(req->sg));
+	sg_init_table(req->sg, SCATTERLIST_MAX);
+	if (crp->crp_flags & CRYPTO_F_SKBUF) {
+		int i, len;
+
+		sg_num = 0;
+		sg_len = 0;
+
+		if (skip < skb_headlen(skb)) {
+			len = skb_headlen(skb) - skip;
+			if (len + sg_len > crd->crd_len)
+				len = crd->crd_len - sg_len;
+			sg_set_page(&req->sg[sg_num],
+				virt_to_page(skb->data + skip), len,
+				offset_in_page(skb->data + skip));
+			sg_len += len;
+			sg_num++;
+			skip = 0;
+		} else
+			skip -= skb_headlen(skb);
+
+		for (i = 0; sg_len < crd->crd_len &&
+					i < skb_shinfo(skb)->nr_frags &&
+					sg_num < SCATTERLIST_MAX; i++) {
+			if (skip < skb_shinfo(skb)->frags[i].size) {
+				len = skb_shinfo(skb)->frags[i].size - skip;
+				if (len + sg_len > crd->crd_len)
+					len = crd->crd_len - sg_len;
+				sg_set_page(&req->sg[sg_num],
+					skb_shinfo(skb)->frags[i].page,
+					len,
+					skb_shinfo(skb)->frags[i].page_offset + skip);
+				sg_len += len;
+				sg_num++;
+				skip = 0;
+			} else
+				skip -= skb_shinfo(skb)->frags[i].size;
+		}
+	} else if (crp->crp_flags & CRYPTO_F_IOV) {
+		int len;
+
+		sg_len = 0;
+		for (sg_num = 0; sg_len < crd->crd_len &&
+				sg_num < uiop->uio_iovcnt &&
+				sg_num < SCATTERLIST_MAX; sg_num++) {
+			if (skip <= uiop->uio_iov[sg_num].iov_len) {
+				len = uiop->uio_iov[sg_num].iov_len - skip;
+				if (len + sg_len > crd->crd_len)
+					len = crd->crd_len - sg_len;
+				sg_set_page(&req->sg[sg_num],
+					virt_to_page(uiop->uio_iov[sg_num].iov_base+skip),
+					len,
+					offset_in_page(uiop->uio_iov[sg_num].iov_base+skip));
+				sg_len += len;
+				skip = 0;
+			} else 
+				skip -= uiop->uio_iov[sg_num].iov_len;
+		}
+	} else {
+		sg_len = (crp->crp_ilen - skip);
+		if (sg_len > crd->crd_len)
+			sg_len = crd->crd_len;
+		sg_set_page(&req->sg[0], virt_to_page(crp->crp_buf + skip),
+			sg_len, offset_in_page(crp->crp_buf + skip));
+		sg_num = 1;
+	}
+
+	switch (sw->sw_type & SW_TYPE_ALG_AMASK) {
+
+#ifdef HAVE_AHASH
+	case SW_TYPE_AHMAC:
+	case SW_TYPE_AHASH:
+		{
+		int ret;
+
+		/* check we have room for the result */
+		if (crp->crp_ilen - crd->crd_inject < sw->u.hmac.sw_mlen) {
+			dprintk("cryptosoft: EINVAL crp_ilen=%d, len=%d, inject=%d "
+					"digestsize=%d\n", crp->crp_ilen, crd->crd_skip + sg_len,
+					crd->crd_inject, sw->u.hmac.sw_mlen);
+			crp->crp_etype = EINVAL;
+			goto done;
+		}
+
+		req->crypto_req =
+				ahash_request_alloc(__crypto_ahash_cast(sw->sw_tfm),GFP_KERNEL);
+		if (!req->crypto_req) {
+			crp->crp_etype = ENOMEM;
+			dprintk("%s,%d: ENOMEM ahash_request_alloc", __FILE__, __LINE__);
+			goto done;
+		}
+
+		ahash_request_set_callback(req->crypto_req,
+				CRYPTO_TFM_REQ_MAY_BACKLOG, swcr_process_callback, req);
+
+		memset(req->result, 0, sizeof(req->result));
+
+		if (sw->sw_type & SW_TYPE_AHMAC)
+			crypto_ahash_setkey(__crypto_ahash_cast(sw->sw_tfm),
+					sw->u.hmac.sw_key, sw->u.hmac.sw_klen);
+		ahash_request_set_crypt(req->crypto_req, req->sg, req->result, sg_len);
+		ret = crypto_ahash_digest(req->crypto_req);
+		switch (ret) {
+		case -EINPROGRESS:
+		case -EBUSY:
+			return;
+		default:
+		case 0:
+			dprintk("hash OP %s %d\n", ret ? "failed" : "success", ret);
+			crp->crp_etype = ret;
+			ahash_request_free(req->crypto_req);
+			goto done;
+		}
+		} break;
+#endif /* HAVE_AHASH */
+
+#ifdef HAVE_ABLKCIPHER
+	case SW_TYPE_ABLKCIPHER: {
+		int ret;
+		unsigned char *ivp = req->iv;
+		int ivsize = 
+			crypto_ablkcipher_ivsize(__crypto_ablkcipher_cast(sw->sw_tfm));
+
+		if (sg_len < crypto_ablkcipher_blocksize(
+				__crypto_ablkcipher_cast(sw->sw_tfm))) {
+			crp->crp_etype = EINVAL;
+			dprintk("%s,%d: EINVAL len %d < %d\n", __FILE__, __LINE__,
+					sg_len, crypto_ablkcipher_blocksize(
+						__crypto_ablkcipher_cast(sw->sw_tfm)));
+			goto done;
+		}
+
+		if (ivsize > sizeof(req->iv)) {
+			crp->crp_etype = EINVAL;
+			dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+			goto done;
+		}
+
+		req->crypto_req = ablkcipher_request_alloc(
+				__crypto_ablkcipher_cast(sw->sw_tfm), GFP_KERNEL);
+		if (!req->crypto_req) {
+			crp->crp_etype = ENOMEM;
+			dprintk("%s,%d: ENOMEM ablkcipher_request_alloc",
+					__FILE__, __LINE__);
+			goto done;
+		}
+
+		ablkcipher_request_set_callback(req->crypto_req,
+				CRYPTO_TFM_REQ_MAY_BACKLOG, swcr_process_callback, req);
+
+		if (crd->crd_flags & CRD_F_KEY_EXPLICIT) {
+			int i, error;
+
+			if (debug) {
+				dprintk("%s key:", __FUNCTION__);
+				for (i = 0; i < (crd->crd_klen + 7) / 8; i++)
+					dprintk("%s0x%x", (i % 8) ? " " : "\n    ",
+							crd->crd_key[i] & 0xff);
+				dprintk("\n");
+			}
+			/* OCF doesn't enforce keys */
+			crypto_ablkcipher_set_flags(__crypto_ablkcipher_cast(sw->sw_tfm),
+					CRYPTO_TFM_REQ_WEAK_KEY);
+			error = crypto_ablkcipher_setkey(
+						__crypto_ablkcipher_cast(sw->sw_tfm), crd->crd_key,
+						(crd->crd_klen + 7) / 8);
+			if (error) {
+				dprintk("cryptosoft: setkey failed %d (crt_flags=0x%x)\n",
+						error, sw->sw_tfm->crt_flags);
+				crp->crp_etype = -error;
+			}
+		}
+
+		if (crd->crd_flags & CRD_F_ENCRYPT) { /* encrypt */
+
+			if (crd->crd_flags & CRD_F_IV_EXPLICIT)
+				ivp = crd->crd_iv;
+			else
+				get_random_bytes(ivp, ivsize);
+			/*
+			 * do we have to copy the IV back to the buffer ?
+			 */
+			if ((crd->crd_flags & CRD_F_IV_PRESENT) == 0) {
+				crypto_copyback(crp->crp_flags, crp->crp_buf,
+						crd->crd_inject, ivsize, (caddr_t)ivp);
+			}
+			ablkcipher_request_set_crypt(req->crypto_req, req->sg, req->sg,
+					sg_len, ivp);
+			ret = crypto_ablkcipher_encrypt(req->crypto_req);
+
+		} else { /*decrypt */
+
+			if (crd->crd_flags & CRD_F_IV_EXPLICIT)
+				ivp = crd->crd_iv;
+			else
+				crypto_copydata(crp->crp_flags, crp->crp_buf,
+						crd->crd_inject, ivsize, (caddr_t)ivp);
+			ablkcipher_request_set_crypt(req->crypto_req, req->sg, req->sg,
+					sg_len, ivp);
+			ret = crypto_ablkcipher_decrypt(req->crypto_req);
+		}
+
+		switch (ret) {
+		case -EINPROGRESS:
+		case -EBUSY:
+			return;
+		default:
+		case 0:
+			dprintk("crypto OP %s %d\n", ret ? "failed" : "success", ret);
+			crp->crp_etype = ret;
+			goto done;
+		}
+		} break;
+#endif /* HAVE_ABLKCIPHER */
+
+	case SW_TYPE_BLKCIPHER: {
+		unsigned char iv[EALG_MAX_BLOCK_LEN];
+		unsigned char *ivp = iv;
+		struct blkcipher_desc desc;
+		int ivsize = crypto_blkcipher_ivsize(crypto_blkcipher_cast(sw->sw_tfm));
+
+		if (sg_len < crypto_blkcipher_blocksize(
+				crypto_blkcipher_cast(sw->sw_tfm))) {
+			crp->crp_etype = EINVAL;
+			dprintk("%s,%d: EINVAL len %d < %d\n", __FILE__, __LINE__,
+					sg_len, crypto_blkcipher_blocksize(
+						crypto_blkcipher_cast(sw->sw_tfm)));
+			goto done;
+		}
+
+		if (ivsize > sizeof(iv)) {
+			crp->crp_etype = EINVAL;
+			dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+			goto done;
+		}
+
+		if (crd->crd_flags & CRD_F_KEY_EXPLICIT) {
+			int i, error;
+
+			if (debug) {
+				dprintk("%s key:", __FUNCTION__);
+				for (i = 0; i < (crd->crd_klen + 7) / 8; i++)
+					dprintk("%s0x%x", (i % 8) ? " " : "\n    ",
+							crd->crd_key[i] & 0xff);
+				dprintk("\n");
+			}
+			/* OCF doesn't enforce keys */
+			crypto_blkcipher_set_flags(crypto_blkcipher_cast(sw->sw_tfm),
+					CRYPTO_TFM_REQ_WEAK_KEY);
+			error = crypto_blkcipher_setkey(
+						crypto_blkcipher_cast(sw->sw_tfm), crd->crd_key,
+						(crd->crd_klen + 7) / 8);
+			if (error) {
+				dprintk("cryptosoft: setkey failed %d (crt_flags=0x%x)\n",
+						error, sw->sw_tfm->crt_flags);
+				crp->crp_etype = -error;
+			}
+		}
+
+		memset(&desc, 0, sizeof(desc));
+		desc.tfm = crypto_blkcipher_cast(sw->sw_tfm);
+
+		if (crd->crd_flags & CRD_F_ENCRYPT) { /* encrypt */
+
+			if (crd->crd_flags & CRD_F_IV_EXPLICIT) {
+				ivp = crd->crd_iv;
+			} else {
+				get_random_bytes(ivp, ivsize);
+			}
+			/*
+			 * do we have to copy the IV back to the buffer ?
+			 */
+			if ((crd->crd_flags & CRD_F_IV_PRESENT) == 0) {
+				crypto_copyback(crp->crp_flags, crp->crp_buf,
+						crd->crd_inject, ivsize, (caddr_t)ivp);
+			}
+			desc.info = ivp;
+			crypto_blkcipher_encrypt_iv(&desc, req->sg, req->sg, sg_len);
+
+		} else { /*decrypt */
+
+			if (crd->crd_flags & CRD_F_IV_EXPLICIT) {
+				ivp = crd->crd_iv;
+			} else {
+				crypto_copydata(crp->crp_flags, crp->crp_buf,
+						crd->crd_inject, ivsize, (caddr_t)ivp);
+			}
+			desc.info = ivp;
+			crypto_blkcipher_decrypt_iv(&desc, req->sg, req->sg, sg_len);
+		}
+		} break;
+
+	case SW_TYPE_HMAC:
+	case SW_TYPE_HASH:
+		{
+		char result[HASH_MAX_LEN];
+		struct hash_desc desc;
+
+		/* check we have room for the result */
+		if (crp->crp_ilen - crd->crd_inject < sw->u.hmac.sw_mlen) {
+			dprintk("cryptosoft: EINVAL crp_ilen=%d, len=%d, inject=%d "
+					"digestsize=%d\n", crp->crp_ilen, crd->crd_skip + sg_len,
+					crd->crd_inject, sw->u.hmac.sw_mlen);
+			crp->crp_etype = EINVAL;
+			goto done;
+		}
+
+		memset(&desc, 0, sizeof(desc));
+		desc.tfm = crypto_hash_cast(sw->sw_tfm);
+
+		memset(result, 0, sizeof(result));
+
+		if (sw->sw_type & SW_TYPE_HMAC) {
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)
+			crypto_hmac(sw->sw_tfm, sw->u.hmac.sw_key, &sw->u.hmac.sw_klen,
+					req->sg, sg_num, result);
+#else
+			crypto_hash_setkey(desc.tfm, sw->u.hmac.sw_key,
+					sw->u.hmac.sw_klen);
+			crypto_hash_digest(&desc, req->sg, sg_len, result);
+#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) */
+			
+		} else { /* SW_TYPE_HASH */
+			crypto_hash_digest(&desc, req->sg, sg_len, result);
+		}
+
+		crypto_copyback(crp->crp_flags, crp->crp_buf,
+				crd->crd_inject, sw->u.hmac.sw_mlen, result);
+		}
+		break;
+
+	case SW_TYPE_COMP: {
+		void *ibuf = NULL;
+		void *obuf = sw->u.sw_comp_buf;
+		int ilen = sg_len, olen = CRYPTO_MAX_DATA_LEN;
+		int ret = 0;
+
+		/*
+		 * we need to use an additional copy if there is more than one
+		 * input chunk since the kernel comp routines do not handle
+		 * SG yet.  Otherwise we just use the input buffer as is.
+		 * Rather than allocate another buffer we just split the tmp
+		 * buffer we already have.
+		 * Perhaps we should just use zlib directly ?
+		 */
+		if (sg_num > 1) {
+			int blk;
+
+			ibuf = obuf;
+			for (blk = 0; blk < sg_num; blk++) {
+				memcpy(obuf, sg_virt(&req->sg[blk]),
+						req->sg[blk].length);
+				obuf += req->sg[blk].length;
+			}
+			olen -= sg_len;
+		} else
+			ibuf = sg_virt(&req->sg[0]);
+
+		if (crd->crd_flags & CRD_F_ENCRYPT) { /* compress */
+			ret = crypto_comp_compress(crypto_comp_cast(sw->sw_tfm),
+					ibuf, ilen, obuf, &olen);
+			if (!ret && olen > crd->crd_len) {
+				dprintk("cryptosoft: ERANGE compress %d into %d\n",
+						crd->crd_len, olen);
+				if (swcr_fail_if_compression_grows)
+					ret = ERANGE;
+			}
+		} else { /* decompress */
+			ret = crypto_comp_decompress(crypto_comp_cast(sw->sw_tfm),
+					ibuf, ilen, obuf, &olen);
+			if (!ret && (olen + crd->crd_inject) > crp->crp_olen) {
+				dprintk("cryptosoft: ETOOSMALL decompress %d into %d, "
+						"space for %d,at offset %d\n",
+						crd->crd_len, olen, crp->crp_olen, crd->crd_inject);
+				ret = ETOOSMALL;
+			}
+		}
+		if (ret)
+			dprintk("%s,%d: ret = %d\n", __FILE__, __LINE__, ret);
+
+		/*
+		 * on success copy result back,
+		 * linux crpyto API returns -errno,  we need to fix that
+		 */
+		crp->crp_etype = ret < 0 ? -ret : ret;
+		if (ret == 0) {
+			/* copy back the result and return it's size */
+			crypto_copyback(crp->crp_flags, crp->crp_buf,
+					crd->crd_inject, olen, obuf);
+			crp->crp_olen = olen;
+		}
+
+
+		} break;
+
+	default:
+		/* Unknown/unsupported algorithm */
+		dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+		crp->crp_etype = EINVAL;
+		goto done;
+	}
+
+done:
+	crypto_done(crp);
+	kmem_cache_free(swcr_req_cache, req);
+}
+
+
+/*
+ * Process a crypto request.
+ */
+static int
+swcr_process(device_t dev, struct cryptop *crp, int hint)
+{
+	struct swcr_req *req = NULL;
+	u_int32_t lid;
+
+	dprintk("%s()\n", __FUNCTION__);
+	/* Sanity check */
+	if (crp == NULL) {
+		dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+		return EINVAL;
+	}
+
+	crp->crp_etype = 0;
+
+	if (crp->crp_desc == NULL || crp->crp_buf == NULL) {
+		dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+		crp->crp_etype = EINVAL;
+		goto done;
+	}
+
+	lid = crp->crp_sid & 0xffffffff;
+	if (lid >= swcr_sesnum || lid == 0 || swcr_sessions == NULL ||
+			swcr_sessions[lid] == NULL) {
+		crp->crp_etype = ENOENT;
+		dprintk("%s,%d: ENOENT\n", __FILE__, __LINE__);
+		goto done;
+	}
+
+	/*
+	 * do some error checking outside of the loop for SKB and IOV processing
+	 * this leaves us with valid skb or uiop pointers for later
+	 */
+	if (crp->crp_flags & CRYPTO_F_SKBUF) {
+		struct sk_buff *skb = (struct sk_buff *) crp->crp_buf;
+		if (skb_shinfo(skb)->nr_frags >= SCATTERLIST_MAX) {
+			printk("%s,%d: %d nr_frags > SCATTERLIST_MAX", __FILE__, __LINE__,
+					skb_shinfo(skb)->nr_frags);
+			goto done;
+		}
+	} else if (crp->crp_flags & CRYPTO_F_IOV) {
+		struct uio *uiop = (struct uio *) crp->crp_buf;
+		if (uiop->uio_iovcnt > SCATTERLIST_MAX) {
+			printk("%s,%d: %d uio_iovcnt > SCATTERLIST_MAX", __FILE__, __LINE__,
+					uiop->uio_iovcnt);
+			goto done;
+		}
+	}
+
+	/*
+	 * setup a new request ready for queuing
+	 */
+	req = kmem_cache_alloc(swcr_req_cache, SLAB_ATOMIC);
+	if (req == NULL) {
+		dprintk("%s,%d: ENOMEM\n", __FILE__, __LINE__);
+		crp->crp_etype = ENOMEM;
+		goto done;
+	}
+	memset(req, 0, sizeof(*req));
+
+	req->sw_head = swcr_sessions[lid];
+	req->crp = crp;
+	req->crd = crp->crp_desc;
+
+	swcr_process_req(req);
+	return 0;
+
+done:
+	crypto_done(crp);
+	if (req)
+		kmem_cache_free(swcr_req_cache, req);
+	return 0;
+}
+
+
+static int
+cryptosoft_init(void)
+{
+	int i, sw_type, mode;
+	char *algo;
+
+	dprintk("%s(%p)\n", __FUNCTION__, cryptosoft_init);
+
+	swcr_req_cache = kmem_cache_create("cryptosoft_req",
+				sizeof(struct swcr_req), 0, SLAB_HWCACHE_ALIGN, NULL
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)
+				, NULL
+#endif
+				);
+	if (!swcr_req_cache) {
+		printk("cryptosoft: failed to create request cache\n");
+		return -ENOENT;
+	}
+
+	softc_device_init(&swcr_softc, "cryptosoft", 0, swcr_methods);
+
+	swcr_id = crypto_get_driverid(softc_get_device(&swcr_softc),
+			CRYPTOCAP_F_SOFTWARE | CRYPTOCAP_F_SYNC);
+	if (swcr_id < 0) {
+		printk("cryptosoft: Software crypto device cannot initialize!");
+		return -ENODEV;
+	}
+
+#define	REGISTER(alg) \
+		crypto_register(swcr_id, alg, 0,0)
+
+	for (i = 0; i < sizeof(crypto_details)/sizeof(crypto_details[0]); i++) {
+		int found;
+		
+		algo = crypto_details[i].alg_name;
+		if (!algo || !*algo) {
+			dprintk("%s:Algorithm %d not supported\n", __FUNCTION__, i);
+			continue;
+		}
+
+		mode = crypto_details[i].mode;
+		sw_type = crypto_details[i].sw_type;
+
+		found = 0;
+		switch (sw_type & SW_TYPE_ALG_MASK) {
+		case SW_TYPE_CIPHER:
+			found = crypto_has_cipher(algo, 0, CRYPTO_ALG_ASYNC);
+			break;
+		case SW_TYPE_HMAC:
+			found = crypto_has_hash(algo, 0, swcr_no_ahash?CRYPTO_ALG_ASYNC:0);
+			break;
+		case SW_TYPE_HASH:
+			found = crypto_has_hash(algo, 0, swcr_no_ahash?CRYPTO_ALG_ASYNC:0);
+			break;
+		case SW_TYPE_COMP:
+			found = crypto_has_comp(algo, 0, CRYPTO_ALG_ASYNC);
+			break;
+		case SW_TYPE_BLKCIPHER:
+			found = crypto_has_blkcipher(algo, 0, CRYPTO_ALG_ASYNC);
+			if (!found && !swcr_no_ablk)
+				found = crypto_has_ablkcipher(algo, 0, 0);
+			break;
+		}
+		if (found) {
+			REGISTER(i);
+		} else {
+			dprintk("%s:Algorithm Type %d not supported (algorithm %d:'%s')\n",
+					__FUNCTION__, sw_type, i, algo);
+		}
+	}
+	return 0;
+}
+
+static void
+cryptosoft_exit(void)
+{
+	dprintk("%s()\n", __FUNCTION__);
+	crypto_unregister_all(swcr_id);
+	swcr_id = -1;
+	kmem_cache_destroy(swcr_req_cache);
+}
+
+late_initcall(cryptosoft_init);
+module_exit(cryptosoft_exit);
+
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_AUTHOR("David McCullough <david_mccullough@securecomputing.com>");
+MODULE_DESCRIPTION("Cryptosoft (OCF module for kernel crypto)");
diff --git a/target/linux/generic/files/crypto/ocf/ep80579/Makefile b/target/linux/generic/files/crypto/ocf/ep80579/Makefile
new file mode 100644
index 0000000000..9aab295731
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/ep80579/Makefile
@@ -0,0 +1,119 @@
+#########################################################################
+#
+#  Targets supported
+#  all     - builds everything and installs
+#  install - identical to all
+#  depend  - build dependencies
+#  clean   - clears derived objects except the .depend files
+#  distclean- clears all derived objects and the .depend file
+#  
+# @par
+# This file is provided under a dual BSD/GPLv2 license.  When using or 
+#   redistributing this file, you may do so under either license.
+# 
+#   GPL LICENSE SUMMARY
+# 
+#   Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
+# 
+#   This program is free software; you can redistribute it and/or modify 
+#   it under the terms of version 2 of the GNU General Public License as
+#   published by the Free Software Foundation.
+# 
+#   This program is distributed in the hope that it will be useful, but 
+#   WITHOUT ANY WARRANTY; without even the implied warranty of 
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU 
+#   General Public License for more details.
+# 
+#   You should have received a copy of the GNU General Public License 
+#   along with this program; if not, write to the Free Software 
+#   Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+#   The full GNU General Public License is included in this distribution 
+#   in the file called LICENSE.GPL.
+# 
+#   Contact Information:
+#   Intel Corporation
+# 
+#   BSD LICENSE 
+# 
+#   Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
+#   All rights reserved.
+# 
+#   Redistribution and use in source and binary forms, with or without 
+#   modification, are permitted provided that the following conditions 
+#   are met:
+# 
+#     * Redistributions of source code must retain the above copyright 
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright 
+#       notice, this list of conditions and the following disclaimer in 
+#       the documentation and/or other materials provided with the 
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its 
+#       contributors may be used to endorse or promote products derived 
+#       from this software without specific prior written permission.
+# 
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+# 
+# 
+#  version: Security.L.1.0.2-229
+############################################################################
+
+
+####################Common variables and definitions########################
+
+ifndef ICP_ROOT
+$(warning ICP_ROOT is undefined. Please set the path to EP80579 release package directory \
+        "-> setenv ICP_ROOT <path>")
+all fastdep:
+	:
+else
+
+ifndef KERNEL_SOURCE_ROOT
+$(error KERNEL_SOURCE_ROOT is undefined. Please set the path to the kernel source directory \
+        "-> setenv KERNEL_SOURCE_ROOT <path>")
+endif
+
+# Ensure The ENV_DIR environmental var is defined.
+ifndef ICP_ENV_DIR
+$(error ICP_ENV_DIR is undefined. Please set the path to EP80579 driver environment.mk file \
+        "-> setenv ICP_ENV_DIR <path>")
+endif
+
+#Add your project environment Makefile
+include ${ICP_ENV_DIR}/environment.mk
+
+#include the makefile with all the default and common Make variable definitions
+include ${ICP_BUILDSYSTEM_PATH}/build_files/common.mk
+
+#Add the name for the executable, Library or Module output definitions
+OUTPUT_NAME= icp_ocf
+
+# List of Source Files to be compiled 
+SOURCES= icp_common.c icp_sym.c icp_asym.c icp_ocf_linux.c
+
+#common includes between all supported OSes
+INCLUDES= -I ${ICP_API_DIR} -I${ICP_LAC_API} \
+-I${ICP_OCF_SRC_DIR}
+
+# The location of the os level makefile needs to be changed.
+include ${ICP_ENV_DIR}/${ICP_OS}_${ICP_OS_LEVEL}.mk
+
+# On the line directly below list the outputs you wish to build for,
+# e.g "lib_static lib_shared exe module" as shown below
+install: module
+
+###################Include rules makefiles########################
+include ${ICP_BUILDSYSTEM_PATH}/build_files/rules.mk
+###################End of Rules inclusion#########################
+
+endif
diff --git a/target/linux/generic/files/crypto/ocf/ep80579/icp_asym.c b/target/linux/generic/files/crypto/ocf/ep80579/icp_asym.c
new file mode 100644
index 0000000000..d2641c5455
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/ep80579/icp_asym.c
@@ -0,0 +1,1334 @@
+/***************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or 
+ *   redistributing this file, you may do so under either license.
+ * 
+ *   GPL LICENSE SUMMARY
+ * 
+ *   Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
+ * 
+ *   This program is free software; you can redistribute it and/or modify 
+ *   it under the terms of version 2 of the GNU General Public License as
+ *   published by the Free Software Foundation.
+ * 
+ *   This program is distributed in the hope that it will be useful, but 
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of 
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU 
+ *   General Public License for more details.
+ * 
+ *   You should have received a copy of the GNU General Public License 
+ *   along with this program; if not, write to the Free Software 
+ *   Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *   The full GNU General Public License is included in this distribution 
+ *   in the file called LICENSE.GPL.
+ * 
+ *   Contact Information:
+ *   Intel Corporation
+ * 
+ *   BSD LICENSE 
+ * 
+ *   Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ * 
+ *   Redistribution and use in source and binary forms, with or without 
+ *   modification, are permitted provided that the following conditions 
+ *   are met:
+ * 
+ *     * Redistributions of source code must retain the above copyright 
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright 
+ *       notice, this list of conditions and the following disclaimer in 
+ *       the documentation and/or other materials provided with the 
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its 
+ *       contributors may be used to endorse or promote products derived 
+ *       from this software without specific prior written permission.
+ * 
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ * 
+ *  version: Security.L.1.0.2-229
+ *
+ ***************************************************************************/
+
+#include "icp_ocf.h"
+
+/*The following define values (containing the word 'INDEX') are used to find
+the index of each input buffer of the crypto_kop struct (see OCF cryptodev.h).
+These values were found through analysis of the OCF OpenSSL patch. If the
+calling program uses different input buffer positions, these defines will have
+to be changed.*/
+
+/*DIFFIE HELLMAN buffer index values*/
+#define ICP_DH_KRP_PARAM_PRIME_INDEX                            (0)
+#define ICP_DH_KRP_PARAM_BASE_INDEX                             (1)
+#define ICP_DH_KRP_PARAM_PRIVATE_VALUE_INDEX                    (2)
+#define ICP_DH_KRP_PARAM_RESULT_INDEX                           (3)
+
+/*MOD EXP buffer index values*/
+#define ICP_MOD_EXP_KRP_PARAM_BASE_INDEX                        (0)
+#define ICP_MOD_EXP_KRP_PARAM_EXPONENT_INDEX                    (1)
+#define ICP_MOD_EXP_KRP_PARAM_MODULUS_INDEX                     (2)
+#define ICP_MOD_EXP_KRP_PARAM_RESULT_INDEX                      (3)
+
+/*MOD EXP CRT buffer index values*/
+#define ICP_MOD_EXP_CRT_KRP_PARAM_PRIME_P_INDEX                 (0)
+#define ICP_MOD_EXP_CRT_KRP_PARAM_PRIME_Q_INDEX                 (1)
+#define ICP_MOD_EXP_CRT_KRP_PARAM_I_INDEX                       (2)
+#define ICP_MOD_EXP_CRT_KRP_PARAM_EXPONENT_DP_INDEX             (3)
+#define ICP_MOD_EXP_CRT_KRP_PARAM_EXPONENT_DQ_INDEX             (4)
+#define ICP_MOD_EXP_CRT_KRP_PARAM_COEFF_QINV_INDEX              (5)
+#define ICP_MOD_EXP_CRT_KRP_PARAM_RESULT_INDEX                  (6)
+
+/*DSA sign buffer index values*/
+#define ICP_DSA_SIGN_KRP_PARAM_DGST_INDEX                       (0)
+#define ICP_DSA_SIGN_KRP_PARAM_PRIME_P_INDEX                    (1)
+#define ICP_DSA_SIGN_KRP_PARAM_PRIME_Q_INDEX                    (2)
+#define ICP_DSA_SIGN_KRP_PARAM_G_INDEX                          (3)
+#define ICP_DSA_SIGN_KRP_PARAM_X_INDEX                          (4)
+#define ICP_DSA_SIGN_KRP_PARAM_R_RESULT_INDEX                   (5)
+#define ICP_DSA_SIGN_KRP_PARAM_S_RESULT_INDEX                   (6)
+
+/*DSA verify buffer index values*/
+#define ICP_DSA_VERIFY_KRP_PARAM_DGST_INDEX                     (0)
+#define ICP_DSA_VERIFY_KRP_PARAM_PRIME_P_INDEX                  (1)
+#define ICP_DSA_VERIFY_KRP_PARAM_PRIME_Q_INDEX                  (2)
+#define ICP_DSA_VERIFY_KRP_PARAM_G_INDEX                        (3)
+#define ICP_DSA_VERIFY_KRP_PARAM_PUBKEY_INDEX                   (4)
+#define ICP_DSA_VERIFY_KRP_PARAM_SIG_R_INDEX                    (5)
+#define ICP_DSA_VERIFY_KRP_PARAM_SIG_S_INDEX                    (6)
+
+/*DSA sign prime Q vs random number K size check values*/
+#define DONT_RUN_LESS_THAN_CHECK                                (0)
+#define FAIL_A_IS_GREATER_THAN_B                                (1)
+#define FAIL_A_IS_EQUAL_TO_B                                    (1)
+#define SUCCESS_A_IS_LESS_THAN_B                                (0)
+#define DSA_SIGN_RAND_GEN_VAL_CHECK_MAX_ITERATIONS              (500)
+
+/* We need to set a cryptokp success value just in case it is set or allocated
+   and not set to zero outside of this module */
+#define CRYPTO_OP_SUCCESS                                       (0)
+
+/*Function to compute Diffie Hellman (DH) phase 1 or phase 2 key values*/
+static int icp_ocfDrvDHComputeKey(struct cryptkop *krp);
+
+/*Function to compute a Modular Exponentiation (Mod Exp)*/
+static int icp_ocfDrvModExp(struct cryptkop *krp);
+
+/*Function to compute a Mod Exp using the Chinease Remainder Theorem*/
+static int icp_ocfDrvModExpCRT(struct cryptkop *krp);
+
+/*Helper function to compute whether the first big number argument is less than
+ the second big number argument */
+static int
+icp_ocfDrvCheckALessThanB(CpaFlatBuffer * pK, CpaFlatBuffer * pQ, int *doCheck);
+
+/*Function to sign an input with DSA R and S keys*/
+static int icp_ocfDrvDsaSign(struct cryptkop *krp);
+
+/*Function to Verify a DSA buffer signature*/
+static int icp_ocfDrvDsaVerify(struct cryptkop *krp);
+
+/*Callback function for DH operation*/
+static void
+icp_ocfDrvDhP1CallBack(void *callbackTag,
+		       CpaStatus status,
+		       void *pOpData, CpaFlatBuffer * pLocalOctetStringPV);
+
+/*Callback function for ME operation*/
+static void
+icp_ocfDrvModExpCallBack(void *callbackTag,
+			 CpaStatus status,
+			 void *pOpData, CpaFlatBuffer * pResult);
+
+/*Callback function for ME CRT operation*/
+static void
+icp_ocfDrvModExpCRTCallBack(void *callbackTag,
+			    CpaStatus status,
+			    void *pOpData, CpaFlatBuffer * pOutputData);
+
+/*Callback function for DSA sign operation*/
+static void
+icp_ocfDrvDsaRSSignCallBack(void *callbackTag,
+			    CpaStatus status,
+			    void *pOpData,
+			    CpaBoolean protocolStatus,
+			    CpaFlatBuffer * pR, CpaFlatBuffer * pS);
+
+/*Callback function for DSA Verify operation*/
+static void
+icp_ocfDrvDsaVerifyCallBack(void *callbackTag,
+			    CpaStatus status,
+			    void *pOpData, CpaBoolean verifyStatus);
+
+/* Name        : icp_ocfDrvPkeProcess
+ *
+ * Description : This function will choose which PKE process to follow
+ * based on the input arguments
+ */
+int icp_ocfDrvPkeProcess(icp_device_t dev, struct cryptkop *krp, int hint)
+{
+	CpaStatus lacStatus = CPA_STATUS_SUCCESS;
+
+	if (NULL == krp) {
+		DPRINTK("%s(): Invalid input parameters, cryptkop = %p\n",
+			__FUNCTION__, krp);
+		return EINVAL;
+	}
+
+	if (CPA_TRUE == icp_atomic_read(&icp_ocfDrvIsExiting)) {
+		krp->krp_status = ECANCELED;
+		return ECANCELED;
+	}
+
+	switch (krp->krp_op) {
+	case CRK_DH_COMPUTE_KEY:
+		DPRINTK("%s() doing DH_COMPUTE_KEY\n", __FUNCTION__);
+		lacStatus = icp_ocfDrvDHComputeKey(krp);
+		if (CPA_STATUS_SUCCESS != lacStatus) {
+			EPRINTK("%s(): icp_ocfDrvDHComputeKey failed "
+				"(%d).\n", __FUNCTION__, lacStatus);
+			krp->krp_status = ECANCELED;
+			return ECANCELED;
+		}
+
+		break;
+
+	case CRK_MOD_EXP:
+		DPRINTK("%s() doing MOD_EXP \n", __FUNCTION__);
+		lacStatus = icp_ocfDrvModExp(krp);
+		if (CPA_STATUS_SUCCESS != lacStatus) {
+			EPRINTK("%s(): icp_ocfDrvModExp failed (%d).\n",
+				__FUNCTION__, lacStatus);
+			krp->krp_status = ECANCELED;
+			return ECANCELED;
+		}
+
+		break;
+
+	case CRK_MOD_EXP_CRT:
+		DPRINTK("%s() doing MOD_EXP_CRT \n", __FUNCTION__);
+		lacStatus = icp_ocfDrvModExpCRT(krp);
+		if (CPA_STATUS_SUCCESS != lacStatus) {
+			EPRINTK("%s(): icp_ocfDrvModExpCRT "
+				"failed (%d).\n", __FUNCTION__, lacStatus);
+			krp->krp_status = ECANCELED;
+			return ECANCELED;
+		}
+
+		break;
+
+	case CRK_DSA_SIGN:
+		DPRINTK("%s() doing DSA_SIGN \n", __FUNCTION__);
+		lacStatus = icp_ocfDrvDsaSign(krp);
+		if (CPA_STATUS_SUCCESS != lacStatus) {
+			EPRINTK("%s(): icp_ocfDrvDsaSign "
+				"failed (%d).\n", __FUNCTION__, lacStatus);
+			krp->krp_status = ECANCELED;
+			return ECANCELED;
+		}
+
+		break;
+
+	case CRK_DSA_VERIFY:
+		DPRINTK("%s() doing DSA_VERIFY \n", __FUNCTION__);
+		lacStatus = icp_ocfDrvDsaVerify(krp);
+		if (CPA_STATUS_SUCCESS != lacStatus) {
+			EPRINTK("%s(): icp_ocfDrvDsaVerify "
+				"failed (%d).\n", __FUNCTION__, lacStatus);
+			krp->krp_status = ECANCELED;
+			return ECANCELED;
+		}
+
+		break;
+
+	default:
+		EPRINTK("%s(): Asymettric function not "
+			"supported (%d).\n", __FUNCTION__, krp->krp_op);
+		krp->krp_status = EOPNOTSUPP;
+		return EOPNOTSUPP;
+	}
+
+	return ICP_OCF_DRV_STATUS_SUCCESS;
+}
+
+/* Name        : icp_ocfDrvSwapBytes
+ *
+ * Description : This function is used to swap the byte order of a buffer.
+ * It has been seen that in general we are passed little endian byte order
+ * buffers, but LAC only accepts big endian byte order buffers.
+ */
+static void inline icp_ocfDrvSwapBytes(u_int8_t * num, u_int32_t buff_len_bytes)
+{
+
+	int i;
+	u_int8_t *end_ptr;
+	u_int8_t hold_val;
+
+	end_ptr = num + (buff_len_bytes - 1);
+	buff_len_bytes = buff_len_bytes >> 1;
+	for (i = 0; i < buff_len_bytes; i++) {
+		hold_val = *num;
+		*num = *end_ptr;
+		num++;
+		*end_ptr = hold_val;
+		end_ptr--;
+	}
+}
+
+/* Name        : icp_ocfDrvDHComputeKey
+ *
+ * Description : This function will map Diffie Hellman calls from OCF
+ * to the LAC API. OCF uses this function for Diffie Hellman Phase1 and
+ * Phase2. LAC has a separate Diffie Hellman Phase2 call, however both phases
+ * break down to a modular exponentiation.
+ */
+static int icp_ocfDrvDHComputeKey(struct cryptkop *krp)
+{
+	CpaStatus lacStatus = CPA_STATUS_SUCCESS;
+	void *callbackTag = NULL;
+	CpaCyDhPhase1KeyGenOpData *pPhase1OpData = NULL;
+	CpaFlatBuffer *pLocalOctetStringPV = NULL;
+	uint32_t dh_prime_len_bytes = 0, dh_prime_len_bits = 0;
+
+	/* Input checks - check prime is a multiple of 8 bits to allow for
+	   allocation later */
+	dh_prime_len_bits =
+	    (krp->krp_param[ICP_DH_KRP_PARAM_PRIME_INDEX].crp_nbits);
+
+	/* LAC can reject prime lengths based on prime key sizes, we just
+	   need to make sure we can allocate space for the base and
+	   exponent buffers correctly */
+	if ((dh_prime_len_bits % NUM_BITS_IN_BYTE) != 0) {
+		APRINTK("%s(): Warning Prime number buffer size is not a "
+			"multiple of 8 bits\n", __FUNCTION__);
+	}
+
+	/* Result storage space should be the same size as the prime as this
+	   value can take up the same amount of storage space */
+	if (dh_prime_len_bits !=
+	    krp->krp_param[ICP_DH_KRP_PARAM_RESULT_INDEX].crp_nbits) {
+		DPRINTK("%s(): Return Buffer must be the same size "
+			"as the Prime buffer\n", __FUNCTION__);
+		krp->krp_status = EINVAL;
+		return EINVAL;
+	}
+	/* Switch to size in bytes */
+	BITS_TO_BYTES(dh_prime_len_bytes, dh_prime_len_bits);
+
+	callbackTag = krp;
+
+/*All allocations are set to ICP_M_NOWAIT due to the possibility of getting
+called in interrupt context*/
+	pPhase1OpData = icp_kmem_cache_zalloc(drvDH_zone, ICP_M_NOWAIT);
+	if (NULL == pPhase1OpData) {
+		APRINTK("%s():Failed to get memory for key gen data\n",
+			__FUNCTION__);
+		krp->krp_status = ENOMEM;
+		return ENOMEM;
+	}
+
+	pLocalOctetStringPV =
+	    icp_kmem_cache_zalloc(drvFlatBuffer_zone, ICP_M_NOWAIT);
+	if (NULL == pLocalOctetStringPV) {
+		APRINTK("%s():Failed to get memory for pLocalOctetStringPV\n",
+			__FUNCTION__);
+		ICP_CACHE_FREE(drvDH_zone, pPhase1OpData);
+		krp->krp_status = ENOMEM;
+		return ENOMEM;
+	}
+
+	/* Link parameters */
+	pPhase1OpData->primeP.pData =
+	    krp->krp_param[ICP_DH_KRP_PARAM_PRIME_INDEX].crp_p;
+
+	pPhase1OpData->primeP.dataLenInBytes = dh_prime_len_bytes;
+
+	icp_ocfDrvSwapBytes(pPhase1OpData->primeP.pData, dh_prime_len_bytes);
+
+	pPhase1OpData->baseG.pData =
+	    krp->krp_param[ICP_DH_KRP_PARAM_BASE_INDEX].crp_p;
+
+	BITS_TO_BYTES(pPhase1OpData->baseG.dataLenInBytes,
+		      krp->krp_param[ICP_DH_KRP_PARAM_BASE_INDEX].crp_nbits);
+
+	icp_ocfDrvSwapBytes(pPhase1OpData->baseG.pData,
+			    pPhase1OpData->baseG.dataLenInBytes);
+
+	pPhase1OpData->privateValueX.pData =
+	    krp->krp_param[ICP_DH_KRP_PARAM_PRIVATE_VALUE_INDEX].crp_p;
+
+	BITS_TO_BYTES(pPhase1OpData->privateValueX.dataLenInBytes,
+		      krp->krp_param[ICP_DH_KRP_PARAM_PRIVATE_VALUE_INDEX].
+		      crp_nbits);
+
+	icp_ocfDrvSwapBytes(pPhase1OpData->privateValueX.pData,
+			    pPhase1OpData->privateValueX.dataLenInBytes);
+
+	/* Output parameters */
+	pLocalOctetStringPV->pData =
+	    krp->krp_param[ICP_DH_KRP_PARAM_RESULT_INDEX].crp_p;
+
+	BITS_TO_BYTES(pLocalOctetStringPV->dataLenInBytes,
+		      krp->krp_param[ICP_DH_KRP_PARAM_RESULT_INDEX].crp_nbits);
+
+	lacStatus = cpaCyDhKeyGenPhase1(CPA_INSTANCE_HANDLE_SINGLE,
+					icp_ocfDrvDhP1CallBack,
+					callbackTag, pPhase1OpData,
+					pLocalOctetStringPV);
+
+	if (CPA_STATUS_SUCCESS != lacStatus) {
+		EPRINTK("%s(): DH Phase 1 Key Gen failed (%d).\n",
+			__FUNCTION__, lacStatus);
+		icp_ocfDrvFreeFlatBuffer(pLocalOctetStringPV);
+		ICP_CACHE_FREE(drvDH_zone, pPhase1OpData);
+	}
+
+	return lacStatus;
+}
+
+/* Name        : icp_ocfDrvModExp
+ *
+ * Description : This function will map ordinary Modular Exponentiation calls
+ * from OCF to the LAC API.
+ *
+ */
+static int icp_ocfDrvModExp(struct cryptkop *krp)
+{
+	CpaStatus lacStatus = CPA_STATUS_SUCCESS;
+	void *callbackTag = NULL;
+	CpaCyLnModExpOpData *pModExpOpData = NULL;
+	CpaFlatBuffer *pResult = NULL;
+
+	if ((krp->krp_param[ICP_MOD_EXP_KRP_PARAM_MODULUS_INDEX].crp_nbits %
+	     NUM_BITS_IN_BYTE) != 0) {
+		DPRINTK("%s(): Warning - modulus buffer size (%d) is not a "
+			"multiple of 8 bits\n", __FUNCTION__,
+			krp->krp_param[ICP_MOD_EXP_KRP_PARAM_MODULUS_INDEX].
+			crp_nbits);
+	}
+
+	/* Result storage space should be the same size as the prime as this
+	   value can take up the same amount of storage space */
+	if (krp->krp_param[ICP_MOD_EXP_KRP_PARAM_MODULUS_INDEX].crp_nbits >
+	    krp->krp_param[ICP_MOD_EXP_KRP_PARAM_RESULT_INDEX].crp_nbits) {
+		APRINTK("%s(): Return Buffer size must be the same or"
+			" greater than the Modulus buffer\n", __FUNCTION__);
+		krp->krp_status = EINVAL;
+		return EINVAL;
+	}
+
+	callbackTag = krp;
+
+	pModExpOpData = icp_kmem_cache_zalloc(drvLnModExp_zone, ICP_M_NOWAIT);
+	if (NULL == pModExpOpData) {
+		APRINTK("%s():Failed to get memory for key gen data\n",
+			__FUNCTION__);
+		krp->krp_status = ENOMEM;
+		return ENOMEM;
+	}
+
+	pResult = icp_kmem_cache_zalloc(drvFlatBuffer_zone, ICP_M_NOWAIT);
+	if (NULL == pResult) {
+		APRINTK("%s():Failed to get memory for ModExp result\n",
+			__FUNCTION__);
+		ICP_CACHE_FREE(drvLnModExp_zone, pModExpOpData);
+		krp->krp_status = ENOMEM;
+		return ENOMEM;
+	}
+
+	/* Link parameters */
+	pModExpOpData->modulus.pData =
+	    krp->krp_param[ICP_MOD_EXP_KRP_PARAM_MODULUS_INDEX].crp_p;
+	BITS_TO_BYTES(pModExpOpData->modulus.dataLenInBytes,
+		      krp->krp_param[ICP_MOD_EXP_KRP_PARAM_MODULUS_INDEX].
+		      crp_nbits);
+
+	icp_ocfDrvSwapBytes(pModExpOpData->modulus.pData,
+			    pModExpOpData->modulus.dataLenInBytes);
+
+	DPRINTK("%s : base (%d)\n", __FUNCTION__, krp->
+		krp_param[ICP_MOD_EXP_KRP_PARAM_BASE_INDEX].crp_nbits);
+	pModExpOpData->base.pData =
+	    krp->krp_param[ICP_MOD_EXP_KRP_PARAM_BASE_INDEX].crp_p;
+	BITS_TO_BYTES(pModExpOpData->base.dataLenInBytes,
+		      krp->krp_param[ICP_MOD_EXP_KRP_PARAM_BASE_INDEX].
+		      crp_nbits);
+	icp_ocfDrvSwapBytes(pModExpOpData->base.pData,
+			    pModExpOpData->base.dataLenInBytes);
+
+	pModExpOpData->exponent.pData =
+	    krp->krp_param[ICP_MOD_EXP_KRP_PARAM_EXPONENT_INDEX].crp_p;
+	BITS_TO_BYTES(pModExpOpData->exponent.dataLenInBytes,
+		      krp->krp_param[ICP_MOD_EXP_KRP_PARAM_EXPONENT_INDEX].
+		      crp_nbits);
+
+	icp_ocfDrvSwapBytes(pModExpOpData->exponent.pData,
+			    pModExpOpData->exponent.dataLenInBytes);
+	/* Output parameters */
+	pResult->pData =
+	    krp->krp_param[ICP_MOD_EXP_KRP_PARAM_RESULT_INDEX].crp_p,
+	    BITS_TO_BYTES(pResult->dataLenInBytes,
+			  krp->krp_param[ICP_MOD_EXP_KRP_PARAM_RESULT_INDEX].
+			  crp_nbits);
+
+	lacStatus = cpaCyLnModExp(CPA_INSTANCE_HANDLE_SINGLE,
+				  icp_ocfDrvModExpCallBack,
+				  callbackTag, pModExpOpData, pResult);
+
+	if (CPA_STATUS_SUCCESS != lacStatus) {
+		EPRINTK("%s(): Mod Exp Operation failed (%d).\n",
+			__FUNCTION__, lacStatus);
+		krp->krp_status = ECANCELED;
+		icp_ocfDrvFreeFlatBuffer(pResult);
+		ICP_CACHE_FREE(drvLnModExp_zone, pModExpOpData);
+	}
+
+	return lacStatus;
+}
+
+/* Name        : icp_ocfDrvModExpCRT
+ *
+ * Description : This function will map ordinary Modular Exponentiation Chinese
+ * Remainder Theorem implementaion calls from OCF to the LAC API.
+ *
+ * Note : Mod Exp CRT for this driver is accelerated through LAC RSA type 2
+ * decrypt operation. Therefore P and Q input values must always be prime
+ * numbers. Although basic primality checks are done in LAC, it is up to the
+ * user to do any correct prime number checking before passing the inputs.
+ */
+static int icp_ocfDrvModExpCRT(struct cryptkop *krp)
+{
+	CpaStatus lacStatus = CPA_STATUS_SUCCESS;
+	CpaCyRsaDecryptOpData *rsaDecryptOpData = NULL;
+	void *callbackTag = NULL;
+	CpaFlatBuffer *pOutputData = NULL;
+
+	/*Parameter input checks are all done by LAC, no need to repeat
+	   them here. */
+	callbackTag = krp;
+
+	rsaDecryptOpData =
+	    icp_kmem_cache_zalloc(drvRSADecrypt_zone, ICP_M_NOWAIT);
+	if (NULL == rsaDecryptOpData) {
+		APRINTK("%s():Failed to get memory"
+			" for MOD EXP CRT Op data struct\n", __FUNCTION__);
+		krp->krp_status = ENOMEM;
+		return ENOMEM;
+	}
+
+	rsaDecryptOpData->pRecipientPrivateKey
+	    = icp_kmem_cache_zalloc(drvRSAPrivateKey_zone, ICP_M_NOWAIT);
+	if (NULL == rsaDecryptOpData->pRecipientPrivateKey) {
+		APRINTK("%s():Failed to get memory for MOD EXP CRT"
+			" private key values struct\n", __FUNCTION__);
+		ICP_CACHE_FREE(drvRSADecrypt_zone, rsaDecryptOpData);
+		krp->krp_status = ENOMEM;
+		return ENOMEM;
+	}
+
+	rsaDecryptOpData->pRecipientPrivateKey->
+	    version = CPA_CY_RSA_VERSION_TWO_PRIME;
+	rsaDecryptOpData->pRecipientPrivateKey->
+	    privateKeyRepType = CPA_CY_RSA_PRIVATE_KEY_REP_TYPE_2;
+
+	pOutputData = icp_kmem_cache_zalloc(drvFlatBuffer_zone, ICP_M_NOWAIT);
+	if (NULL == pOutputData) {
+		APRINTK("%s():Failed to get memory"
+			" for MOD EXP CRT output data\n", __FUNCTION__);
+		ICP_CACHE_FREE(drvRSAPrivateKey_zone,
+			       rsaDecryptOpData->pRecipientPrivateKey);
+		ICP_CACHE_FREE(drvRSADecrypt_zone, rsaDecryptOpData);
+		krp->krp_status = ENOMEM;
+		return ENOMEM;
+	}
+
+	rsaDecryptOpData->pRecipientPrivateKey->
+	    version = CPA_CY_RSA_VERSION_TWO_PRIME;
+	rsaDecryptOpData->pRecipientPrivateKey->
+	    privateKeyRepType = CPA_CY_RSA_PRIVATE_KEY_REP_TYPE_2;
+
+	/* Link parameters */
+	rsaDecryptOpData->inputData.pData =
+	    krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_I_INDEX].crp_p;
+	BITS_TO_BYTES(rsaDecryptOpData->inputData.dataLenInBytes,
+		      krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_I_INDEX].
+		      crp_nbits);
+
+	icp_ocfDrvSwapBytes(rsaDecryptOpData->inputData.pData,
+			    rsaDecryptOpData->inputData.dataLenInBytes);
+
+	rsaDecryptOpData->pRecipientPrivateKey->privateKeyRep2.prime1P.pData =
+	    krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_PRIME_P_INDEX].crp_p;
+	BITS_TO_BYTES(rsaDecryptOpData->pRecipientPrivateKey->privateKeyRep2.
+		      prime1P.dataLenInBytes,
+		      krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_PRIME_P_INDEX].
+		      crp_nbits);
+
+	icp_ocfDrvSwapBytes(rsaDecryptOpData->pRecipientPrivateKey->
+			    privateKeyRep2.prime1P.pData,
+			    rsaDecryptOpData->pRecipientPrivateKey->
+			    privateKeyRep2.prime1P.dataLenInBytes);
+
+	rsaDecryptOpData->pRecipientPrivateKey->privateKeyRep2.prime2Q.pData =
+	    krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_PRIME_Q_INDEX].crp_p;
+	BITS_TO_BYTES(rsaDecryptOpData->pRecipientPrivateKey->privateKeyRep2.
+		      prime2Q.dataLenInBytes,
+		      krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_PRIME_Q_INDEX].
+		      crp_nbits);
+
+	icp_ocfDrvSwapBytes(rsaDecryptOpData->pRecipientPrivateKey->
+			    privateKeyRep2.prime2Q.pData,
+			    rsaDecryptOpData->pRecipientPrivateKey->
+			    privateKeyRep2.prime2Q.dataLenInBytes);
+
+	rsaDecryptOpData->pRecipientPrivateKey->
+	    privateKeyRep2.exponent1Dp.pData =
+	    krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_EXPONENT_DP_INDEX].crp_p;
+	BITS_TO_BYTES(rsaDecryptOpData->pRecipientPrivateKey->privateKeyRep2.
+		      exponent1Dp.dataLenInBytes,
+		      krp->
+		      krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_EXPONENT_DP_INDEX].
+		      crp_nbits);
+
+	icp_ocfDrvSwapBytes(rsaDecryptOpData->pRecipientPrivateKey->
+			    privateKeyRep2.exponent1Dp.pData,
+			    rsaDecryptOpData->pRecipientPrivateKey->
+			    privateKeyRep2.exponent1Dp.dataLenInBytes);
+
+	rsaDecryptOpData->pRecipientPrivateKey->
+	    privateKeyRep2.exponent2Dq.pData =
+	    krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_EXPONENT_DQ_INDEX].crp_p;
+	BITS_TO_BYTES(rsaDecryptOpData->pRecipientPrivateKey->
+		      privateKeyRep2.exponent2Dq.dataLenInBytes,
+		      krp->
+		      krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_EXPONENT_DQ_INDEX].
+		      crp_nbits);
+
+	icp_ocfDrvSwapBytes(rsaDecryptOpData->pRecipientPrivateKey->
+			    privateKeyRep2.exponent2Dq.pData,
+			    rsaDecryptOpData->pRecipientPrivateKey->
+			    privateKeyRep2.exponent2Dq.dataLenInBytes);
+
+	rsaDecryptOpData->pRecipientPrivateKey->
+	    privateKeyRep2.coefficientQInv.pData =
+	    krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_COEFF_QINV_INDEX].crp_p;
+	BITS_TO_BYTES(rsaDecryptOpData->pRecipientPrivateKey->
+		      privateKeyRep2.coefficientQInv.dataLenInBytes,
+		      krp->
+		      krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_COEFF_QINV_INDEX].
+		      crp_nbits);
+
+	icp_ocfDrvSwapBytes(rsaDecryptOpData->pRecipientPrivateKey->
+			    privateKeyRep2.coefficientQInv.pData,
+			    rsaDecryptOpData->pRecipientPrivateKey->
+			    privateKeyRep2.coefficientQInv.dataLenInBytes);
+
+	/* Output Parameter */
+	pOutputData->pData =
+	    krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_RESULT_INDEX].crp_p;
+	BITS_TO_BYTES(pOutputData->dataLenInBytes,
+		      krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_RESULT_INDEX].
+		      crp_nbits);
+
+	lacStatus = cpaCyRsaDecrypt(CPA_INSTANCE_HANDLE_SINGLE,
+				    icp_ocfDrvModExpCRTCallBack,
+				    callbackTag, rsaDecryptOpData, pOutputData);
+
+	if (CPA_STATUS_SUCCESS != lacStatus) {
+		EPRINTK("%s(): Mod Exp CRT Operation failed (%d).\n",
+			__FUNCTION__, lacStatus);
+		krp->krp_status = ECANCELED;
+		icp_ocfDrvFreeFlatBuffer(pOutputData);
+		ICP_CACHE_FREE(drvRSAPrivateKey_zone,
+			       rsaDecryptOpData->pRecipientPrivateKey);
+		ICP_CACHE_FREE(drvRSADecrypt_zone, rsaDecryptOpData);
+	}
+
+	return lacStatus;
+}
+
+/* Name        : icp_ocfDrvCheckALessThanB
+ *
+ * Description : This function will check whether the first argument is less
+ * than the second. It is used to check whether the DSA RS sign Random K
+ * value is less than the Prime Q value (as defined in the specification)
+ *
+ */
+static int
+icp_ocfDrvCheckALessThanB(CpaFlatBuffer * pK, CpaFlatBuffer * pQ, int *doCheck)
+{
+
+	uint8_t *MSB_K = pK->pData;
+	uint8_t *MSB_Q = pQ->pData;
+	uint32_t buffer_lengths_in_bytes = pQ->dataLenInBytes;
+
+	if (DONT_RUN_LESS_THAN_CHECK == *doCheck) {
+		return FAIL_A_IS_GREATER_THAN_B;
+	}
+
+/*Check MSBs
+if A == B, check next MSB
+if A > B, return A_IS_GREATER_THAN_B
+if A < B, return A_IS_LESS_THAN_B (success)
+*/
+	while (*MSB_K == *MSB_Q) {
+		MSB_K++;
+		MSB_Q++;
+
+		buffer_lengths_in_bytes--;
+		if (0 == buffer_lengths_in_bytes) {
+			DPRINTK("%s() Buffers have equal value!!\n",
+				__FUNCTION__);
+			return FAIL_A_IS_EQUAL_TO_B;
+		}
+
+	}
+
+	if (*MSB_K < *MSB_Q) {
+		return SUCCESS_A_IS_LESS_THAN_B;
+	} else {
+		return FAIL_A_IS_GREATER_THAN_B;
+	}
+
+}
+
+/* Name        : icp_ocfDrvDsaSign
+ *
+ * Description : This function will map DSA RS Sign from OCF to the LAC API.
+ *
+ * NOTE: From looking at OCF patch to OpenSSL and even the number of input
+ * parameters, OCF expects us to generate the random seed value. This value
+ * is generated and passed to LAC, however the number is discared in the
+ * callback and not returned to the user.
+ */
+static int icp_ocfDrvDsaSign(struct cryptkop *krp)
+{
+	CpaStatus lacStatus = CPA_STATUS_SUCCESS;
+	CpaCyDsaRSSignOpData *dsaRsSignOpData = NULL;
+	void *callbackTag = NULL;
+	CpaCyRandGenOpData randGenOpData;
+	int primeQSizeInBytes = 0;
+	int doCheck = 0;
+	CpaFlatBuffer randData;
+	CpaBoolean protocolStatus = CPA_FALSE;
+	CpaFlatBuffer *pR = NULL;
+	CpaFlatBuffer *pS = NULL;
+
+	callbackTag = krp;
+
+	BITS_TO_BYTES(primeQSizeInBytes,
+		      krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_PRIME_Q_INDEX].
+		      crp_nbits);
+
+	if (DSA_RS_SIGN_PRIMEQ_SIZE_IN_BYTES != primeQSizeInBytes) {
+		APRINTK("%s(): DSA PRIME Q size not equal to the "
+			"FIPS defined 20bytes, = %d\n",
+			__FUNCTION__, primeQSizeInBytes);
+		krp->krp_status = EDOM;
+		return EDOM;
+	}
+
+	dsaRsSignOpData =
+	    icp_kmem_cache_zalloc(drvDSARSSign_zone, ICP_M_NOWAIT);
+	if (NULL == dsaRsSignOpData) {
+		APRINTK("%s():Failed to get memory"
+			" for DSA RS Sign Op data struct\n", __FUNCTION__);
+		krp->krp_status = ENOMEM;
+		return ENOMEM;
+	}
+
+	dsaRsSignOpData->K.pData =
+	    icp_kmem_cache_alloc(drvDSARSSignKValue_zone, ICP_M_NOWAIT);
+
+	if (NULL == dsaRsSignOpData->K.pData) {
+		APRINTK("%s():Failed to get memory"
+			" for DSA RS Sign Op Random value\n", __FUNCTION__);
+		ICP_CACHE_FREE(drvDSARSSign_zone, dsaRsSignOpData);
+		krp->krp_status = ENOMEM;
+		return ENOMEM;
+	}
+
+	pR = icp_kmem_cache_zalloc(drvFlatBuffer_zone, ICP_M_NOWAIT);
+	if (NULL == pR) {
+		APRINTK("%s():Failed to get memory"
+			" for DSA signature R\n", __FUNCTION__);
+		ICP_CACHE_FREE(drvDSARSSignKValue_zone,
+			       dsaRsSignOpData->K.pData);
+		ICP_CACHE_FREE(drvDSARSSign_zone, dsaRsSignOpData);
+		krp->krp_status = ENOMEM;
+		return ENOMEM;
+	}
+
+	pS = icp_kmem_cache_zalloc(drvFlatBuffer_zone, ICP_M_NOWAIT);
+	if (NULL == pS) {
+		APRINTK("%s():Failed to get memory"
+			" for DSA signature S\n", __FUNCTION__);
+		icp_ocfDrvFreeFlatBuffer(pR);
+		ICP_CACHE_FREE(drvDSARSSignKValue_zone,
+			       dsaRsSignOpData->K.pData);
+		ICP_CACHE_FREE(drvDSARSSign_zone, dsaRsSignOpData);
+		krp->krp_status = ENOMEM;
+		return ENOMEM;
+	}
+
+	/*link prime number parameter for ease of processing */
+	dsaRsSignOpData->P.pData =
+	    krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_PRIME_P_INDEX].crp_p;
+	BITS_TO_BYTES(dsaRsSignOpData->P.dataLenInBytes,
+		      krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_PRIME_P_INDEX].
+		      crp_nbits);
+
+	icp_ocfDrvSwapBytes(dsaRsSignOpData->P.pData,
+			    dsaRsSignOpData->P.dataLenInBytes);
+
+	dsaRsSignOpData->Q.pData =
+	    krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_PRIME_Q_INDEX].crp_p;
+	BITS_TO_BYTES(dsaRsSignOpData->Q.dataLenInBytes,
+		      krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_PRIME_Q_INDEX].
+		      crp_nbits);
+
+	icp_ocfDrvSwapBytes(dsaRsSignOpData->Q.pData,
+			    dsaRsSignOpData->Q.dataLenInBytes);
+
+	/*generate random number with equal buffer size to Prime value Q,
+	   but value less than Q */
+	dsaRsSignOpData->K.dataLenInBytes = dsaRsSignOpData->Q.dataLenInBytes;
+
+	randGenOpData.generateBits = CPA_TRUE;
+	randGenOpData.lenInBytes = dsaRsSignOpData->K.dataLenInBytes;
+
+	icp_ocfDrvPtrAndLenToFlatBuffer(dsaRsSignOpData->K.pData,
+					dsaRsSignOpData->K.dataLenInBytes,
+					&randData);
+
+	doCheck = 0;
+	while (icp_ocfDrvCheckALessThanB(&(dsaRsSignOpData->K),
+					 &(dsaRsSignOpData->Q), &doCheck)) {
+
+		if (CPA_STATUS_SUCCESS
+		    != cpaCyRandGen(CPA_INSTANCE_HANDLE_SINGLE,
+				    NULL, NULL, &randGenOpData, &randData)) {
+			APRINTK("%s(): ERROR - Failed to generate DSA RS Sign K"
+				"value\n", __FUNCTION__);
+			icp_ocfDrvFreeFlatBuffer(pS);
+			icp_ocfDrvFreeFlatBuffer(pR);
+			ICP_CACHE_FREE(drvDSARSSignKValue_zone,
+				       dsaRsSignOpData->K.pData);
+			ICP_CACHE_FREE(drvDSARSSign_zone, dsaRsSignOpData);
+			krp->krp_status = EAGAIN;
+			return EAGAIN;
+		}
+
+		doCheck++;
+		if (DSA_SIGN_RAND_GEN_VAL_CHECK_MAX_ITERATIONS == doCheck) {
+			APRINTK("%s(): ERROR - Failed to find DSA RS Sign K "
+				"value less than Q value\n", __FUNCTION__);
+			icp_ocfDrvFreeFlatBuffer(pS);
+			icp_ocfDrvFreeFlatBuffer(pR);
+			ICP_CACHE_FREE(drvDSARSSignKValue_zone,
+				       dsaRsSignOpData->K.pData);
+			ICP_CACHE_FREE(drvDSARSSign_zone, dsaRsSignOpData);
+			krp->krp_status = EAGAIN;
+			return EAGAIN;
+		}
+
+	}
+	/*Rand Data - no need to swap bytes for pK */
+
+	/* Link parameters */
+	dsaRsSignOpData->G.pData =
+	    krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_G_INDEX].crp_p;
+	BITS_TO_BYTES(dsaRsSignOpData->G.dataLenInBytes,
+		      krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_G_INDEX].crp_nbits);
+
+	icp_ocfDrvSwapBytes(dsaRsSignOpData->G.pData,
+			    dsaRsSignOpData->G.dataLenInBytes);
+
+	dsaRsSignOpData->X.pData =
+	    krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_X_INDEX].crp_p;
+	BITS_TO_BYTES(dsaRsSignOpData->X.dataLenInBytes,
+		      krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_X_INDEX].crp_nbits);
+	icp_ocfDrvSwapBytes(dsaRsSignOpData->X.pData,
+			    dsaRsSignOpData->X.dataLenInBytes);
+
+	/*OpenSSL dgst parameter is left in big endian byte order, 
+	   therefore no byte swap is required */
+	dsaRsSignOpData->M.pData =
+	    krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_DGST_INDEX].crp_p;
+	BITS_TO_BYTES(dsaRsSignOpData->M.dataLenInBytes,
+		      krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_DGST_INDEX].
+		      crp_nbits);
+
+	/* Output Parameters */
+	pS->pData = krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_S_RESULT_INDEX].crp_p;
+	BITS_TO_BYTES(pS->dataLenInBytes,
+		      krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_S_RESULT_INDEX].
+		      crp_nbits);
+
+	pR->pData = krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_R_RESULT_INDEX].crp_p;
+	BITS_TO_BYTES(pR->dataLenInBytes,
+		      krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_R_RESULT_INDEX].
+		      crp_nbits);
+
+	lacStatus = cpaCyDsaSignRS(CPA_INSTANCE_HANDLE_SINGLE,
+				   icp_ocfDrvDsaRSSignCallBack,
+				   callbackTag, dsaRsSignOpData,
+				   &protocolStatus, pR, pS);
+
+	if (CPA_STATUS_SUCCESS != lacStatus) {
+		EPRINTK("%s(): DSA RS Sign Operation failed (%d).\n",
+			__FUNCTION__, lacStatus);
+		krp->krp_status = ECANCELED;
+		icp_ocfDrvFreeFlatBuffer(pS);
+		icp_ocfDrvFreeFlatBuffer(pR);
+		ICP_CACHE_FREE(drvDSARSSignKValue_zone,
+			       dsaRsSignOpData->K.pData);
+		ICP_CACHE_FREE(drvDSARSSign_zone, dsaRsSignOpData);
+	}
+
+	return lacStatus;
+}
+
+/* Name        : icp_ocfDrvDsaVerify
+ *
+ * Description : This function will map DSA RS Verify from OCF to the LAC API.
+ *
+ */
+static int icp_ocfDrvDsaVerify(struct cryptkop *krp)
+{
+	CpaStatus lacStatus = CPA_STATUS_SUCCESS;
+	CpaCyDsaVerifyOpData *dsaVerifyOpData = NULL;
+	void *callbackTag = NULL;
+	CpaBoolean verifyStatus = CPA_FALSE;
+
+	callbackTag = krp;
+
+	dsaVerifyOpData =
+	    icp_kmem_cache_zalloc(drvDSAVerify_zone, ICP_M_NOWAIT);
+	if (NULL == dsaVerifyOpData) {
+		APRINTK("%s():Failed to get memory"
+			" for DSA Verify Op data struct\n", __FUNCTION__);
+		krp->krp_status = ENOMEM;
+		return ENOMEM;
+	}
+
+	/* Link parameters */
+	dsaVerifyOpData->P.pData =
+	    krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_PRIME_P_INDEX].crp_p;
+	BITS_TO_BYTES(dsaVerifyOpData->P.dataLenInBytes,
+		      krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_PRIME_P_INDEX].
+		      crp_nbits);
+	icp_ocfDrvSwapBytes(dsaVerifyOpData->P.pData,
+			    dsaVerifyOpData->P.dataLenInBytes);
+
+	dsaVerifyOpData->Q.pData =
+	    krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_PRIME_Q_INDEX].crp_p;
+	BITS_TO_BYTES(dsaVerifyOpData->Q.dataLenInBytes,
+		      krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_PRIME_Q_INDEX].
+		      crp_nbits);
+	icp_ocfDrvSwapBytes(dsaVerifyOpData->Q.pData,
+			    dsaVerifyOpData->Q.dataLenInBytes);
+
+	dsaVerifyOpData->G.pData =
+	    krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_G_INDEX].crp_p;
+	BITS_TO_BYTES(dsaVerifyOpData->G.dataLenInBytes,
+		      krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_G_INDEX].
+		      crp_nbits);
+	icp_ocfDrvSwapBytes(dsaVerifyOpData->G.pData,
+			    dsaVerifyOpData->G.dataLenInBytes);
+
+	dsaVerifyOpData->Y.pData =
+	    krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_PUBKEY_INDEX].crp_p;
+	BITS_TO_BYTES(dsaVerifyOpData->Y.dataLenInBytes,
+		      krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_PUBKEY_INDEX].
+		      crp_nbits);
+	icp_ocfDrvSwapBytes(dsaVerifyOpData->Y.pData,
+			    dsaVerifyOpData->Y.dataLenInBytes);
+
+	/*OpenSSL dgst parameter is left in big endian byte order, 
+	   therefore no byte swap is required */
+	dsaVerifyOpData->M.pData =
+	    krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_DGST_INDEX].crp_p;
+	BITS_TO_BYTES(dsaVerifyOpData->M.dataLenInBytes,
+		      krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_DGST_INDEX].
+		      crp_nbits);
+
+	dsaVerifyOpData->R.pData =
+	    krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_SIG_R_INDEX].crp_p;
+	BITS_TO_BYTES(dsaVerifyOpData->R.dataLenInBytes,
+		      krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_SIG_R_INDEX].
+		      crp_nbits);
+	icp_ocfDrvSwapBytes(dsaVerifyOpData->R.pData,
+			    dsaVerifyOpData->R.dataLenInBytes);
+
+	dsaVerifyOpData->S.pData =
+	    krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_SIG_S_INDEX].crp_p;
+	BITS_TO_BYTES(dsaVerifyOpData->S.dataLenInBytes,
+		      krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_SIG_S_INDEX].
+		      crp_nbits);
+	icp_ocfDrvSwapBytes(dsaVerifyOpData->S.pData,
+			    dsaVerifyOpData->S.dataLenInBytes);
+
+	lacStatus = cpaCyDsaVerify(CPA_INSTANCE_HANDLE_SINGLE,
+				   icp_ocfDrvDsaVerifyCallBack,
+				   callbackTag, dsaVerifyOpData, &verifyStatus);
+
+	if (CPA_STATUS_SUCCESS != lacStatus) {
+		EPRINTK("%s(): DSA Verify Operation failed (%d).\n",
+			__FUNCTION__, lacStatus);
+		ICP_CACHE_FREE(drvDSAVerify_zone, dsaVerifyOpData);
+		krp->krp_status = ECANCELED;
+	}
+
+	return lacStatus;
+}
+
+/* Name        : icp_ocfDrvDhP1Callback
+ *
+ * Description : When this function returns it signifies that the LAC
+ * component has completed the DH operation.
+ */
+static void
+icp_ocfDrvDhP1CallBack(void *callbackTag,
+		       CpaStatus status,
+		       void *pOpData, CpaFlatBuffer * pLocalOctetStringPV)
+{
+	struct cryptkop *krp = NULL;
+	CpaCyDhPhase1KeyGenOpData *pPhase1OpData = NULL;
+
+	if (NULL == callbackTag) {
+		DPRINTK("%s(): Invalid input parameters - "
+			"callbackTag data is NULL\n", __FUNCTION__);
+		return;
+	}
+	krp = (struct cryptkop *)callbackTag;
+
+	if (NULL == pOpData) {
+		DPRINTK("%s(): Invalid input parameters - "
+			"Operation Data is NULL\n", __FUNCTION__);
+		krp->krp_status = ECANCELED;
+		crypto_kdone(krp);
+		return;
+	}
+	pPhase1OpData = (CpaCyDhPhase1KeyGenOpData *) pOpData;
+
+	if (NULL == pLocalOctetStringPV) {
+		DPRINTK("%s(): Invalid input parameters - "
+			"pLocalOctetStringPV Data is NULL\n", __FUNCTION__);
+		memset(pPhase1OpData, 0, sizeof(CpaCyDhPhase1KeyGenOpData));
+		ICP_CACHE_FREE(drvDH_zone, pPhase1OpData);
+		krp->krp_status = ECANCELED;
+		crypto_kdone(krp);
+		return;
+	}
+
+	if (CPA_STATUS_SUCCESS == status) {
+		krp->krp_status = CRYPTO_OP_SUCCESS;
+	} else {
+		APRINTK("%s(): Diffie Hellman Phase1 Key Gen failed - "
+			"Operation Status = %d\n", __FUNCTION__, status);
+		krp->krp_status = ECANCELED;
+	}
+
+	icp_ocfDrvSwapBytes(pLocalOctetStringPV->pData,
+			    pLocalOctetStringPV->dataLenInBytes);
+
+	icp_ocfDrvFreeFlatBuffer(pLocalOctetStringPV);
+	memset(pPhase1OpData, 0, sizeof(CpaCyDhPhase1KeyGenOpData));
+	ICP_CACHE_FREE(drvDH_zone, pPhase1OpData);
+
+	crypto_kdone(krp);
+
+	return;
+}
+
+/* Name        : icp_ocfDrvModExpCallBack
+ *
+ * Description : When this function returns it signifies that the LAC
+ * component has completed the Mod Exp operation.
+ */
+static void
+icp_ocfDrvModExpCallBack(void *callbackTag,
+			 CpaStatus status,
+			 void *pOpdata, CpaFlatBuffer * pResult)
+{
+	struct cryptkop *krp = NULL;
+	CpaCyLnModExpOpData *pLnModExpOpData = NULL;
+
+	if (NULL == callbackTag) {
+		DPRINTK("%s(): Invalid input parameters - "
+			"callbackTag data is NULL\n", __FUNCTION__);
+		return;
+	}
+	krp = (struct cryptkop *)callbackTag;
+
+	if (NULL == pOpdata) {
+		DPRINTK("%s(): Invalid Mod Exp input parameters - "
+			"Operation Data is NULL\n", __FUNCTION__);
+		krp->krp_status = ECANCELED;
+		crypto_kdone(krp);
+		return;
+	}
+	pLnModExpOpData = (CpaCyLnModExpOpData *) pOpdata;
+
+	if (NULL == pResult) {
+		DPRINTK("%s(): Invalid input parameters - "
+			"pResult data is NULL\n", __FUNCTION__);
+		krp->krp_status = ECANCELED;
+		memset(pLnModExpOpData, 0, sizeof(CpaCyLnModExpOpData));
+		ICP_CACHE_FREE(drvLnModExp_zone, pLnModExpOpData);
+		crypto_kdone(krp);
+		return;
+	}
+
+	if (CPA_STATUS_SUCCESS == status) {
+		krp->krp_status = CRYPTO_OP_SUCCESS;
+	} else {
+		APRINTK("%s(): LAC Mod Exp Operation failed - "
+			"Operation Status = %d\n", __FUNCTION__, status);
+		krp->krp_status = ECANCELED;
+	}
+
+	icp_ocfDrvSwapBytes(pResult->pData, pResult->dataLenInBytes);
+
+	/*switch base size value back to original */
+	if (pLnModExpOpData->base.pData ==
+	    (uint8_t *) & (krp->
+			   krp_param[ICP_MOD_EXP_KRP_PARAM_BASE_INDEX].
+			   crp_nbits)) {
+		*((uint32_t *) pLnModExpOpData->base.pData) =
+		    ntohl(*((uint32_t *) pLnModExpOpData->base.pData));
+	}
+	icp_ocfDrvFreeFlatBuffer(pResult);
+	memset(pLnModExpOpData, 0, sizeof(CpaCyLnModExpOpData));
+	ICP_CACHE_FREE(drvLnModExp_zone, pLnModExpOpData);
+
+	crypto_kdone(krp);
+
+	return;
+
+}
+
+/* Name        : icp_ocfDrvModExpCRTCallBack
+ *
+ * Description : When this function returns it signifies that the LAC
+ * component has completed the Mod Exp CRT operation.
+ */
+static void
+icp_ocfDrvModExpCRTCallBack(void *callbackTag,
+			    CpaStatus status,
+			    void *pOpData, CpaFlatBuffer * pOutputData)
+{
+	struct cryptkop *krp = NULL;
+	CpaCyRsaDecryptOpData *pDecryptData = NULL;
+
+	if (NULL == callbackTag) {
+		DPRINTK("%s(): Invalid input parameters - "
+			"callbackTag data is NULL\n", __FUNCTION__);
+		return;
+	}
+
+	krp = (struct cryptkop *)callbackTag;
+
+	if (NULL == pOpData) {
+		DPRINTK("%s(): Invalid input parameters - "
+			"Operation Data is NULL\n", __FUNCTION__);
+		krp->krp_status = ECANCELED;
+		crypto_kdone(krp);
+		return;
+	}
+	pDecryptData = (CpaCyRsaDecryptOpData *) pOpData;
+
+	if (NULL == pOutputData) {
+		DPRINTK("%s(): Invalid input parameter - "
+			"pOutputData is NULL\n", __FUNCTION__);
+		memset(pDecryptData->pRecipientPrivateKey, 0,
+		       sizeof(CpaCyRsaPrivateKey));
+		ICP_CACHE_FREE(drvRSAPrivateKey_zone,
+			       pDecryptData->pRecipientPrivateKey);
+		memset(pDecryptData, 0, sizeof(CpaCyRsaDecryptOpData));
+		ICP_CACHE_FREE(drvRSADecrypt_zone, pDecryptData);
+		krp->krp_status = ECANCELED;
+		crypto_kdone(krp);
+		return;
+	}
+
+	if (CPA_STATUS_SUCCESS == status) {
+		krp->krp_status = CRYPTO_OP_SUCCESS;
+	} else {
+		APRINTK("%s(): LAC Mod Exp CRT operation failed - "
+			"Operation Status = %d\n", __FUNCTION__, status);
+		krp->krp_status = ECANCELED;
+	}
+
+	icp_ocfDrvSwapBytes(pOutputData->pData, pOutputData->dataLenInBytes);
+
+	icp_ocfDrvFreeFlatBuffer(pOutputData);
+	memset(pDecryptData->pRecipientPrivateKey, 0,
+	       sizeof(CpaCyRsaPrivateKey));
+	ICP_CACHE_FREE(drvRSAPrivateKey_zone,
+		       pDecryptData->pRecipientPrivateKey);
+	memset(pDecryptData, 0, sizeof(CpaCyRsaDecryptOpData));
+	ICP_CACHE_FREE(drvRSADecrypt_zone, pDecryptData);
+
+	crypto_kdone(krp);
+
+	return;
+}
+
+/* Name        : icp_ocfDrvDsaRSSignCallBack
+ *
+ * Description : When this function returns it signifies that the LAC
+ * component has completed the DSA RS sign operation.
+ */
+static void
+icp_ocfDrvDsaRSSignCallBack(void *callbackTag,
+			    CpaStatus status,
+			    void *pOpData,
+			    CpaBoolean protocolStatus,
+			    CpaFlatBuffer * pR, CpaFlatBuffer * pS)
+{
+	struct cryptkop *krp = NULL;
+	CpaCyDsaRSSignOpData *pSignData = NULL;
+
+	if (NULL == callbackTag) {
+		DPRINTK("%s(): Invalid input parameters - "
+			"callbackTag data is NULL\n", __FUNCTION__);
+		return;
+	}
+
+	krp = (struct cryptkop *)callbackTag;
+
+	if (NULL == pOpData) {
+		DPRINTK("%s(): Invalid input parameters - "
+			"Operation Data is NULL\n", __FUNCTION__);
+		krp->krp_status = ECANCELED;
+		crypto_kdone(krp);
+		return;
+	}
+	pSignData = (CpaCyDsaRSSignOpData *) pOpData;
+
+	if (NULL == pR) {
+		DPRINTK("%s(): Invalid input parameter - "
+			"pR sign is NULL\n", __FUNCTION__);
+		icp_ocfDrvFreeFlatBuffer(pS);
+		ICP_CACHE_FREE(drvDSARSSign_zone, pSignData);
+		krp->krp_status = ECANCELED;
+		crypto_kdone(krp);
+		return;
+	}
+
+	if (NULL == pS) {
+		DPRINTK("%s(): Invalid input parameter - "
+			"pS sign is NULL\n", __FUNCTION__);
+		icp_ocfDrvFreeFlatBuffer(pR);
+		ICP_CACHE_FREE(drvDSARSSign_zone, pSignData);
+		krp->krp_status = ECANCELED;
+		crypto_kdone(krp);
+		return;
+	}
+
+	if (CPA_STATUS_SUCCESS != status) {
+		APRINTK("%s(): LAC DSA RS Sign operation failed - "
+			"Operation Status = %d\n", __FUNCTION__, status);
+		krp->krp_status = ECANCELED;
+	} else {
+		krp->krp_status = CRYPTO_OP_SUCCESS;
+
+		if (CPA_TRUE != protocolStatus) {
+			DPRINTK("%s(): LAC DSA RS Sign operation failed due "
+				"to protocol error\n", __FUNCTION__);
+			krp->krp_status = EIO;
+		}
+	}
+
+	/* Swap bytes only when the callback status is successful and
+	   protocolStatus is set to true */
+	if (CPA_STATUS_SUCCESS == status && CPA_TRUE == protocolStatus) {
+		icp_ocfDrvSwapBytes(pR->pData, pR->dataLenInBytes);
+		icp_ocfDrvSwapBytes(pS->pData, pS->dataLenInBytes);
+	}
+
+	icp_ocfDrvFreeFlatBuffer(pR);
+	icp_ocfDrvFreeFlatBuffer(pS);
+	memset(pSignData->K.pData, 0, pSignData->K.dataLenInBytes);
+	ICP_CACHE_FREE(drvDSARSSignKValue_zone, pSignData->K.pData);
+	memset(pSignData, 0, sizeof(CpaCyDsaRSSignOpData));
+	ICP_CACHE_FREE(drvDSARSSign_zone, pSignData);
+	crypto_kdone(krp);
+
+	return;
+}
+
+/* Name        : icp_ocfDrvDsaVerifyCallback
+ *
+ * Description : When this function returns it signifies that the LAC
+ * component has completed the DSA Verify operation.
+ */
+static void
+icp_ocfDrvDsaVerifyCallBack(void *callbackTag,
+			    CpaStatus status,
+			    void *pOpData, CpaBoolean verifyStatus)
+{
+
+	struct cryptkop *krp = NULL;
+	CpaCyDsaVerifyOpData *pVerData = NULL;
+
+	if (NULL == callbackTag) {
+		DPRINTK("%s(): Invalid input parameters - "
+			"callbackTag data is NULL\n", __FUNCTION__);
+		return;
+	}
+
+	krp = (struct cryptkop *)callbackTag;
+
+	if (NULL == pOpData) {
+		DPRINTK("%s(): Invalid input parameters - "
+			"Operation Data is NULL\n", __FUNCTION__);
+		krp->krp_status = ECANCELED;
+		crypto_kdone(krp);
+		return;
+	}
+	pVerData = (CpaCyDsaVerifyOpData *) pOpData;
+
+	if (CPA_STATUS_SUCCESS != status) {
+		APRINTK("%s(): LAC DSA Verify operation failed - "
+			"Operation Status = %d\n", __FUNCTION__, status);
+		krp->krp_status = ECANCELED;
+	} else {
+		krp->krp_status = CRYPTO_OP_SUCCESS;
+
+		if (CPA_TRUE != verifyStatus) {
+			DPRINTK("%s(): DSA signature invalid\n", __FUNCTION__);
+			krp->krp_status = EIO;
+		}
+	}
+
+	/* Swap bytes only when the callback status is successful and
+	   verifyStatus is set to true */
+	/*Just swapping back the key values for now. Possibly all
+	   swapped buffers need to be reverted */
+	if (CPA_STATUS_SUCCESS == status && CPA_TRUE == verifyStatus) {
+		icp_ocfDrvSwapBytes(pVerData->R.pData,
+				    pVerData->R.dataLenInBytes);
+		icp_ocfDrvSwapBytes(pVerData->S.pData,
+				    pVerData->S.dataLenInBytes);
+	}
+
+	memset(pVerData, 0, sizeof(CpaCyDsaVerifyOpData));
+	ICP_CACHE_FREE(drvDSAVerify_zone, pVerData);
+	crypto_kdone(krp);
+
+	return;
+}
diff --git a/target/linux/generic/files/crypto/ocf/ep80579/icp_common.c b/target/linux/generic/files/crypto/ocf/ep80579/icp_common.c
new file mode 100644
index 0000000000..5d46c0adc6
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/ep80579/icp_common.c
@@ -0,0 +1,773 @@
+/*************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or 
+ *   redistributing this file, you may do so under either license.
+ * 
+ *   GPL LICENSE SUMMARY
+ * 
+ *   Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
+ * 
+ *   This program is free software; you can redistribute it and/or modify 
+ *   it under the terms of version 2 of the GNU General Public License as
+ *   published by the Free Software Foundation.
+ * 
+ *   This program is distributed in the hope that it will be useful, but 
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of 
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU 
+ *   General Public License for more details.
+ * 
+ *   You should have received a copy of the GNU General Public License 
+ *   along with this program; if not, write to the Free Software 
+ *   Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *   The full GNU General Public License is included in this distribution 
+ *   in the file called LICENSE.GPL.
+ * 
+ *   Contact Information:
+ *   Intel Corporation
+ * 
+ *   BSD LICENSE 
+ * 
+ *   Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ * 
+ *   Redistribution and use in source and binary forms, with or without 
+ *   modification, are permitted provided that the following conditions 
+ *   are met:
+ * 
+ *     * Redistributions of source code must retain the above copyright 
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright 
+ *       notice, this list of conditions and the following disclaimer in 
+ *       the documentation and/or other materials provided with the 
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its 
+ *       contributors may be used to endorse or promote products derived 
+ *       from this software without specific prior written permission.
+ * 
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ * 
+ *  version: Security.L.1.0.2-229
+ *
+ ***************************************************************************/
+
+/*
+ * An OCF module that uses Intel® QuickAssist Integrated Accelerator to do the 
+ * crypto.
+ *
+ * This driver requires the ICP Access Library that is available from Intel in
+ * order to operate.
+ */
+
+#include "icp_ocf.h"
+
+#define ICP_OCF_COMP_NAME                       "ICP_OCF"
+#define ICP_OCF_VER_MAIN                        (2)
+#define ICP_OCF_VER_MJR                         (1)
+#define ICP_OCF_VER_MNR                         (0)
+
+#define MAX_DEREG_RETRIES                       (100)
+#define DEFAULT_DEREG_RETRIES 			(10)
+#define DEFAULT_DEREG_DELAY_IN_JIFFIES		(10)
+
+/* This defines the maximum number of sessions possible between OCF
+   and the OCF EP80579 Driver. If set to zero, there is no limit. */
+#define DEFAULT_OCF_TO_DRV_MAX_SESSION_COUNT    (0)
+#define NUM_SUPPORTED_CAPABILITIES              (21)
+
+/*Slab zone names*/
+#define ICP_SESSION_DATA_NAME   "icp_ocf.SesDat"
+#define ICP_OP_DATA_NAME        "icp_ocf.OpDat"
+#define ICP_DH_NAME             "icp_ocf.DH"
+#define ICP_MODEXP_NAME         "icp_ocf.ModExp"
+#define ICP_RSA_DECRYPT_NAME    "icp_ocf.RSAdec"
+#define ICP_RSA_PKEY_NAME       "icp_ocf.RSApk"
+#define ICP_DSA_SIGN_NAME       "icp_ocf.DSAsg"
+#define ICP_DSA_VER_NAME        "icp_ocf.DSAver"
+#define ICP_RAND_VAL_NAME       "icp_ocf.DSArnd"
+#define ICP_FLAT_BUFF_NAME      "icp_ocf.FB"
+
+/*Slabs zones*/
+icp_kmem_cache drvSessionData_zone = NULL;
+icp_kmem_cache drvOpData_zone = NULL;
+icp_kmem_cache drvDH_zone = NULL;
+icp_kmem_cache drvLnModExp_zone = NULL;
+icp_kmem_cache drvRSADecrypt_zone = NULL;
+icp_kmem_cache drvRSAPrivateKey_zone = NULL;
+icp_kmem_cache drvDSARSSign_zone = NULL;
+icp_kmem_cache drvDSARSSignKValue_zone = NULL;
+icp_kmem_cache drvDSAVerify_zone = NULL;
+
+/*Slab zones for flatbuffers and bufferlist*/
+icp_kmem_cache drvFlatBuffer_zone = NULL;
+
+static inline int icp_cache_null_check(void)
+{
+	return (drvSessionData_zone && drvOpData_zone
+		&& drvDH_zone && drvLnModExp_zone && drvRSADecrypt_zone
+		&& drvRSAPrivateKey_zone && drvDSARSSign_zone
+		&& drvDSARSSign_zone && drvDSARSSignKValue_zone
+		&& drvDSAVerify_zone && drvFlatBuffer_zone);
+}
+
+/*Function to free all allocated slab caches before exiting the module*/
+static void icp_ocfDrvFreeCaches(void);
+
+int32_t icp_ocfDrvDriverId = INVALID_DRIVER_ID;
+
+/* Module parameter - gives the number of times LAC deregistration shall be
+   re-tried */
+int num_dereg_retries = DEFAULT_DEREG_RETRIES;
+
+/* Module parameter - gives the delay time in jiffies before a LAC session 
+   shall be attempted to be deregistered again */
+int dereg_retry_delay_in_jiffies = DEFAULT_DEREG_DELAY_IN_JIFFIES;
+
+/* Module parameter - gives the maximum number of sessions possible between
+   OCF and the OCF EP80579 Driver. If set to zero, there is no limit.*/
+int max_sessions = DEFAULT_OCF_TO_DRV_MAX_SESSION_COUNT;
+
+/* This is set when the module is removed from the system, no further
+   processing can take place if this is set */
+icp_atomic_t icp_ocfDrvIsExiting = ICP_ATOMIC_INIT(0);
+
+/* This is used to show how many lac sessions were not deregistered*/
+icp_atomic_t lac_session_failed_dereg_count = ICP_ATOMIC_INIT(0);
+
+/* This is used to track the number of registered sessions between OCF and
+ * and the OCF EP80579 driver, when max_session is set to value other than
+ * zero. This ensures that the max_session set for the OCF and the driver
+ * is equal to the LAC registered sessions */
+icp_atomic_t num_ocf_to_drv_registered_sessions = ICP_ATOMIC_INIT(0);
+
+/* Head of linked list used to store session data */
+icp_drvSessionListHead_t icp_ocfDrvGlobalSymListHead;
+icp_drvSessionListHead_t icp_ocfDrvGlobalSymListHead_FreeMemList;
+
+icp_spinlock_t icp_ocfDrvSymSessInfoListSpinlock;
+
+/*Below pointer is only used in linux, FreeBSD uses the name to
+create its own variable name*/
+icp_workqueue *icp_ocfDrvFreeLacSessionWorkQ = NULL;
+ICP_WORKQUEUE_DEFINE_THREAD(icp_ocfDrvFreeLacSessionWorkQ);
+
+struct icp_drvBuffListInfo defBuffListInfo;
+
+/* Name        : icp_ocfDrvInit
+ *
+ * Description : This function will register all the symmetric and asymmetric
+ * functionality that will be accelerated by the hardware. It will also
+ * get a unique driver ID from the OCF and initialise all slab caches
+ */
+ICP_MODULE_INIT_FUNC(icp_ocfDrvInit)
+{
+	int ocfStatus = 0;
+
+	IPRINTK("=== %s ver %d.%d.%d ===\n", ICP_OCF_COMP_NAME,
+		ICP_OCF_VER_MAIN, ICP_OCF_VER_MJR, ICP_OCF_VER_MNR);
+
+	if (MAX_DEREG_RETRIES < num_dereg_retries) {
+		EPRINTK("Session deregistration retry count set to greater "
+			"than %d", MAX_DEREG_RETRIES);
+		icp_module_return_code(EINVAL);
+	}
+
+	/* Initialize and Start the Cryptographic component */
+	if (CPA_STATUS_SUCCESS !=
+	    cpaCyStartInstance(CPA_INSTANCE_HANDLE_SINGLE)) {
+		EPRINTK("Failed to initialize and start the instance "
+			"of the Cryptographic component.\n");
+		return icp_module_return_code(EINVAL);
+	}
+
+	icp_spin_lock_init(&icp_ocfDrvSymSessInfoListSpinlock);
+
+	/* Set the default size of BufferList to allocate */
+	memset(&defBuffListInfo, 0, sizeof(struct icp_drvBuffListInfo));
+	if (ICP_OCF_DRV_STATUS_SUCCESS !=
+	    icp_ocfDrvBufferListMemInfo(ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS,
+					&defBuffListInfo)) {
+		EPRINTK("Failed to get bufferlist memory info.\n");
+		return icp_module_return_code(ENOMEM);
+	}
+
+	/*Register OCF EP80579 Driver with OCF */
+	icp_ocfDrvDriverId = ICP_CRYPTO_GET_DRIVERID();
+
+	if (icp_ocfDrvDriverId < 0) {
+		EPRINTK("%s : ICP driver failed to register with OCF!\n",
+			__FUNCTION__);
+		return icp_module_return_code(ENODEV);
+	}
+
+	/*Create all the slab caches used by the OCF EP80579 Driver */
+	drvSessionData_zone =
+	    ICP_CACHE_CREATE(ICP_SESSION_DATA_NAME, struct icp_drvSessionData);
+
+	/* 
+	 * Allocation of the OpData includes the allocation space for meta data.
+	 * The memory after the opData structure is reserved for this meta data.
+	 */
+	drvOpData_zone =
+	    icp_kmem_cache_create(ICP_OP_DATA_NAME,
+				  sizeof(struct icp_drvOpData) +
+				  defBuffListInfo.metaSize,
+				  ICP_KERNEL_CACHE_ALIGN,
+				  ICP_KERNEL_CACHE_NOINIT);
+
+	drvDH_zone = ICP_CACHE_CREATE(ICP_DH_NAME, CpaCyDhPhase1KeyGenOpData);
+
+	drvLnModExp_zone =
+	    ICP_CACHE_CREATE(ICP_MODEXP_NAME, CpaCyLnModExpOpData);
+
+	drvRSADecrypt_zone =
+	    ICP_CACHE_CREATE(ICP_RSA_DECRYPT_NAME, CpaCyRsaDecryptOpData);
+
+	drvRSAPrivateKey_zone =
+	    ICP_CACHE_CREATE(ICP_RSA_PKEY_NAME, CpaCyRsaPrivateKey);
+
+	drvDSARSSign_zone =
+	    ICP_CACHE_CREATE(ICP_DSA_SIGN_NAME, CpaCyDsaRSSignOpData);
+
+	/*too awkward to use a macro here */
+	drvDSARSSignKValue_zone =
+	    ICP_CACHE_CREATE(ICP_RAND_VAL_NAME,
+			     DSA_RS_SIGN_PRIMEQ_SIZE_IN_BYTES);
+
+	drvDSAVerify_zone =
+	    ICP_CACHE_CREATE(ICP_DSA_VER_NAME, CpaCyDsaVerifyOpData);
+
+	drvFlatBuffer_zone =
+	    ICP_CACHE_CREATE(ICP_FLAT_BUFF_NAME, CpaFlatBuffer);
+
+	if (0 == icp_cache_null_check()) {
+		icp_ocfDrvFreeCaches();
+		EPRINTK("%s() line %d: Not enough memory!\n",
+			__FUNCTION__, __LINE__);
+		return ENOMEM;
+	}
+
+	/* Register the ICP symmetric crypto support. */
+	ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_NULL_CBC, ocfStatus);
+	ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_DES_CBC, ocfStatus);
+	ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_3DES_CBC, ocfStatus);
+	ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_AES_CBC, ocfStatus);
+	ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_ARC4, ocfStatus);
+	ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_MD5, ocfStatus);
+	ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_MD5_HMAC, ocfStatus);
+	ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA1, ocfStatus);
+	ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA1_HMAC, ocfStatus);
+	ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA2_256, ocfStatus);
+	ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA2_256_HMAC,
+			     ocfStatus);
+	ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA2_384, ocfStatus);
+	ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA2_384_HMAC,
+			     ocfStatus);
+	ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA2_512, ocfStatus);
+	ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA2_512_HMAC,
+			     ocfStatus);
+
+	/* Register the ICP asymmetric algorithm support */
+	ICP_REG_ASYM_WITH_OCF(icp_ocfDrvDriverId, CRK_DH_COMPUTE_KEY,
+			      ocfStatus);
+	ICP_REG_ASYM_WITH_OCF(icp_ocfDrvDriverId, CRK_MOD_EXP, ocfStatus);
+	ICP_REG_ASYM_WITH_OCF(icp_ocfDrvDriverId, CRK_MOD_EXP_CRT, ocfStatus);
+	ICP_REG_ASYM_WITH_OCF(icp_ocfDrvDriverId, CRK_DSA_SIGN, ocfStatus);
+	ICP_REG_ASYM_WITH_OCF(icp_ocfDrvDriverId, CRK_DSA_VERIFY, ocfStatus);
+
+	/* Register the ICP random number generator support */
+	ICP_REG_RAND_WITH_OCF(icp_ocfDrvDriverId,
+			      icp_ocfDrvReadRandom, NULL, ocfStatus);
+
+	if (OCF_ZERO_FUNCTIONALITY_REGISTERED == ocfStatus) {
+		DPRINTK("%s: Failed to register any device capabilities\n",
+			__FUNCTION__);
+		icp_ocfDrvFreeCaches();
+		icp_ocfDrvDriverId = INVALID_DRIVER_ID;
+		return icp_module_return_code(ECANCELED);
+	}
+
+	DPRINTK("%s: Registered %d of %d device capabilities\n",
+		__FUNCTION__, ocfStatus, NUM_SUPPORTED_CAPABILITIES);
+
+	/*Session data linked list used during module exit */
+	ICP_INIT_LIST_HEAD(&icp_ocfDrvGlobalSymListHead);
+	ICP_INIT_LIST_HEAD(&icp_ocfDrvGlobalSymListHead_FreeMemList);
+
+	ICP_WORKQUEUE_CREATE(icp_ocfDrvFreeLacSessionWorkQ, "icpwq");
+	if (ICP_WORKQUEUE_NULL_CHECK(icp_ocfDrvFreeLacSessionWorkQ)) {
+		EPRINTK("%s: Failed to create single "
+			"thread workqueue\n", __FUNCTION__);
+		icp_ocfDrvFreeCaches();
+		icp_ocfDrvDriverId = INVALID_DRIVER_ID;
+		return icp_module_return_code(ENOMEM);
+	}
+
+	return icp_module_return_code(0);
+}
+
+/* Name        : icp_ocfDrvExit
+ *
+ * Description : This function will deregister all the symmetric sessions
+ * registered with the LAC component. It will also deregister all symmetric
+ * and asymmetric functionality that can be accelerated by the hardware via OCF
+ * and random number generation if it is enabled.
+ */
+ICP_MODULE_EXIT_FUNC(icp_ocfDrvExit)
+{
+	CpaStatus lacStatus = CPA_STATUS_SUCCESS;
+	struct icp_drvSessionData *sessionData = NULL;
+	struct icp_drvSessionData *tempSessionData = NULL;
+	int i, remaining_delay_time_in_jiffies = 0;
+
+	/* For FreeBSD the invariant macro below makes function to return     */
+	/* with EBUSY value in the case of any session which has been regi-   */
+	/* stered with LAC not being deregistered.                            */
+	/* The Linux implementation is empty since it is purely to compensate */
+	/* for a limitation of the FreeBSD 7.1 Opencrypto framework.          */
+
+    ICP_MODULE_EXIT_INV();
+
+	/* There is a possibility of a process or new session command being   */
+	/* sent before this variable is incremented. The aim of this variable */
+	/* is to stop a loop of calls creating a deadlock situation which     */
+	/* would prevent the driver from exiting.                             */
+	icp_atomic_set(&icp_ocfDrvIsExiting, 1);
+
+	/*Existing sessions will be routed to another driver after these calls */
+	crypto_unregister_all(icp_ocfDrvDriverId);
+	crypto_runregister_all(icp_ocfDrvDriverId);
+
+	if (ICP_WORKQUEUE_NULL_CHECK(icp_ocfDrvFreeLacSessionWorkQ)) {
+		DPRINTK("%s: workqueue already "
+			"destroyed, therefore module exit "
+			" function already called. Exiting.\n", __FUNCTION__);
+		return ICP_MODULE_EXIT_FUNC_RETURN_VAL;
+	}
+	/*If any sessions are waiting to be deregistered, do that. This also 
+	   flushes the work queue */
+	ICP_WORKQUEUE_DESTROY(icp_ocfDrvFreeLacSessionWorkQ);
+
+	/*ENTER CRITICAL SECTION */
+	icp_spin_lockbh_lock(&icp_ocfDrvSymSessInfoListSpinlock);
+
+	ICP_LIST_FOR_EACH_ENTRY_SAFE(tempSessionData, sessionData,
+				     &icp_ocfDrvGlobalSymListHead, listNode) {
+		for (i = 0; i < num_dereg_retries; i++) {
+			/*No harm if bad input - LAC will handle error cases */
+			if (ICP_SESSION_RUNNING == tempSessionData->inUse) {
+				lacStatus =
+				    cpaCySymRemoveSession
+				    (CPA_INSTANCE_HANDLE_SINGLE,
+				     tempSessionData->sessHandle);
+				if (CPA_STATUS_SUCCESS == lacStatus) {
+					/* Succesfully deregistered */
+					break;
+				} else if (CPA_STATUS_RETRY != lacStatus) {
+					icp_atomic_inc
+					    (&lac_session_failed_dereg_count);
+					break;
+				}
+
+				/*schedule_timout returns the time left for completion if 
+				 * this task is set to TASK_INTERRUPTIBLE */
+				remaining_delay_time_in_jiffies =
+				    dereg_retry_delay_in_jiffies;
+				while (0 > remaining_delay_time_in_jiffies) {
+					remaining_delay_time_in_jiffies =
+					    icp_schedule_timeout
+					    (&icp_ocfDrvSymSessInfoListSpinlock,
+					     remaining_delay_time_in_jiffies);
+				}
+
+				DPRINTK
+				    ("%s(): Retry %d to deregistrate the session\n",
+				     __FUNCTION__, i);
+			}
+		}
+
+		/*remove from current list */
+		ICP_LIST_DEL(tempSessionData, listNode);
+		/*add to free mem linked list */
+		ICP_LIST_ADD(tempSessionData,
+			     &icp_ocfDrvGlobalSymListHead_FreeMemList,
+			     listNode);
+
+	}
+
+	/*EXIT CRITICAL SECTION */
+	icp_spin_lockbh_unlock(&icp_ocfDrvSymSessInfoListSpinlock);
+
+	/*set back to initial values */
+	sessionData = NULL;
+	/*still have a reference in our list! */
+	tempSessionData = NULL;
+	/*free memory */
+
+	ICP_LIST_FOR_EACH_ENTRY_SAFE(tempSessionData, sessionData,
+				     &icp_ocfDrvGlobalSymListHead_FreeMemList,
+				     listNode) {
+
+		ICP_LIST_DEL(tempSessionData, listNode);
+		/* Free allocated CpaCySymSessionCtx */
+		if (NULL != tempSessionData->sessHandle) {
+			icp_kfree(tempSessionData->sessHandle);
+		}
+		memset(tempSessionData, 0, sizeof(struct icp_drvSessionData));
+		ICP_CACHE_FREE(drvSessionData_zone, tempSessionData);
+	}
+
+	if (0 != icp_atomic_read(&lac_session_failed_dereg_count)) {
+		DPRINTK("%s(): %d LAC sessions were not deregistered "
+			"correctly. This is not a clean exit! \n",
+			__FUNCTION__,
+			icp_atomic_read(&lac_session_failed_dereg_count));
+	}
+
+	icp_ocfDrvFreeCaches();
+	icp_ocfDrvDriverId = INVALID_DRIVER_ID;
+
+	icp_spin_lock_destroy(&icp_ocfDrvSymSessInfoListSpinlock);
+
+	/* Shutdown the Cryptographic component */
+	lacStatus = cpaCyStopInstance(CPA_INSTANCE_HANDLE_SINGLE);
+	if (CPA_STATUS_SUCCESS != lacStatus) {
+		DPRINTK("%s(): Failed to stop instance of the "
+			"Cryptographic component.(status == %d)\n",
+			__FUNCTION__, lacStatus);
+	}
+
+	return ICP_MODULE_EXIT_FUNC_RETURN_VAL;
+}
+
+/* Name        : icp_ocfDrvFreeCaches
+ *
+ * Description : This function deregisters all slab caches
+ */
+static void icp_ocfDrvFreeCaches(void)
+{
+	icp_atomic_set(&icp_ocfDrvIsExiting, 1);
+
+	/*Sym Zones */
+	ICP_CACHE_DESTROY(drvSessionData_zone);
+	ICP_CACHE_DESTROY(drvOpData_zone);
+
+	/*Asym zones */
+	ICP_CACHE_DESTROY(drvDH_zone);
+	ICP_CACHE_DESTROY(drvLnModExp_zone);
+	ICP_CACHE_DESTROY(drvRSADecrypt_zone);
+	ICP_CACHE_DESTROY(drvRSAPrivateKey_zone);
+	ICP_CACHE_DESTROY(drvDSARSSignKValue_zone);
+	ICP_CACHE_DESTROY(drvDSARSSign_zone);
+	ICP_CACHE_DESTROY(drvDSAVerify_zone);
+
+	/*FlatBuffer and BufferList Zones */
+	ICP_CACHE_DESTROY(drvFlatBuffer_zone);
+
+}
+
+/* Name        : icp_ocfDrvDeregRetry
+ *
+ * Description : This function will try to farm the session deregistration
+ * off to a work queue. If it fails, nothing more can be done and it
+ * returns an error
+ */
+int icp_ocfDrvDeregRetry(CpaCySymSessionCtx sessionToDeregister)
+{
+	struct icp_ocfDrvFreeLacSession *workstore = NULL;
+
+	DPRINTK("%s(): Retry - Deregistering session (%p)\n",
+		__FUNCTION__, sessionToDeregister);
+
+	/*make sure the session is not available to be allocated during this
+	   process */
+	icp_atomic_inc(&lac_session_failed_dereg_count);
+
+	/*Farm off to work queue */
+	workstore =
+	    icp_kmalloc(sizeof(struct icp_ocfDrvFreeLacSession), ICP_M_NOWAIT);
+	if (NULL == workstore) {
+		DPRINTK("%s(): unable to free session - no memory available "
+			"for work queue\n", __FUNCTION__);
+		return ENOMEM;
+	}
+
+	workstore->sessionToDeregister = sessionToDeregister;
+
+	icp_init_work(&(workstore->work),
+		      icp_ocfDrvDeferedFreeLacSessionTaskFn, workstore);
+
+	ICP_WORKQUEUE_ENQUEUE(icp_ocfDrvFreeLacSessionWorkQ,
+			      &(workstore->work));
+
+	return ICP_OCF_DRV_STATUS_SUCCESS;
+
+}
+
+/* Name        : icp_ocfDrvDeferedFreeLacSessionProcess
+ *
+ * Description : This function will retry (module input parameter)
+ * 'num_dereg_retries' times to deregister any symmetric session that recieves a
+ * CPA_STATUS_RETRY message from the LAC component. This function is run in
+ * Thread context because it is called from a worker thread
+ */
+void icp_ocfDrvDeferedFreeLacSessionProcess(void *arg)
+{
+	struct icp_ocfDrvFreeLacSession *workstore = NULL;
+	CpaCySymSessionCtx sessionToDeregister = NULL;
+	int i = 0;
+	int remaining_delay_time_in_jiffies = 0;
+	CpaStatus lacStatus = CPA_STATUS_SUCCESS;
+
+	workstore = (struct icp_ocfDrvFreeLacSession *)arg;
+	if (NULL == workstore) {
+		DPRINTK("%s() function called with null parameter \n",
+			__FUNCTION__);
+		return;
+	}
+
+	sessionToDeregister = workstore->sessionToDeregister;
+	icp_kfree(workstore);
+
+	/*if exiting, give deregistration one more blast only */
+	if (icp_atomic_read(&icp_ocfDrvIsExiting) == CPA_TRUE) {
+		lacStatus = cpaCySymRemoveSession(CPA_INSTANCE_HANDLE_SINGLE,
+						  sessionToDeregister);
+
+		if (lacStatus != CPA_STATUS_SUCCESS) {
+			DPRINTK("%s() Failed to Dereg LAC session %p "
+				"during module exit\n", __FUNCTION__,
+				sessionToDeregister);
+			return;
+		}
+
+		icp_atomic_dec(&lac_session_failed_dereg_count);
+		return;
+	}
+
+	for (i = 0; i <= num_dereg_retries; i++) {
+		lacStatus = cpaCySymRemoveSession(CPA_INSTANCE_HANDLE_SINGLE,
+						  sessionToDeregister);
+
+		if (lacStatus == CPA_STATUS_SUCCESS) {
+			icp_atomic_dec(&lac_session_failed_dereg_count);
+			return;
+		}
+		if (lacStatus != CPA_STATUS_RETRY) {
+			DPRINTK("%s() Failed to deregister session - lacStatus "
+				" = %d", __FUNCTION__, lacStatus);
+			break;
+		}
+
+		/*schedule_timout returns the time left for completion if this
+		   task is set to TASK_INTERRUPTIBLE */
+		remaining_delay_time_in_jiffies = dereg_retry_delay_in_jiffies;
+		while (0 < remaining_delay_time_in_jiffies) {
+			remaining_delay_time_in_jiffies =
+			    icp_schedule_timeout(NULL,
+						 remaining_delay_time_in_jiffies);
+		}
+
+	}
+
+	DPRINTK("%s(): Unable to deregister session\n", __FUNCTION__);
+	DPRINTK("%s(): Number of unavailable LAC sessions = %d\n", __FUNCTION__,
+		icp_atomic_read(&lac_session_failed_dereg_count));
+}
+
+/* Name        : icp_ocfDrvPtrAndLenToFlatBuffer 
+ *
+ * Description : This function converts a "pointer and length" buffer 
+ * structure to Fredericksburg Flat Buffer (CpaFlatBuffer) format.
+ *
+ * This function assumes that the data passed in are valid.
+ */
+inline void
+icp_ocfDrvPtrAndLenToFlatBuffer(void *pData, uint32_t len,
+				CpaFlatBuffer * pFlatBuffer)
+{
+	pFlatBuffer->pData = pData;
+	pFlatBuffer->dataLenInBytes = len;
+}
+
+/* Name        : icp_ocfDrvPtrAndLenToBufferList
+ *
+ * Description : This function converts a "pointer and length" buffer
+ * structure to Fredericksburg Scatter/Gather Buffer (CpaBufferList) format.
+ *
+ * This function assumes that the data passed in are valid.
+ */
+inline void
+icp_ocfDrvPtrAndLenToBufferList(void *pDataIn, uint32_t length,
+				CpaBufferList * pBufferList)
+{
+	pBufferList->numBuffers = 1;
+	pBufferList->pBuffers->pData = pDataIn;
+	pBufferList->pBuffers->dataLenInBytes = length;
+}
+
+/* Name        : icp_ocfDrvBufferListToPtrAndLen
+ *
+ * Description : This function converts Fredericksburg Scatter/Gather Buffer
+ * (CpaBufferList) format to a "pointer and length" buffer structure.
+ *
+ * This function assumes that the data passed in are valid.
+ */
+inline void
+icp_ocfDrvBufferListToPtrAndLen(CpaBufferList * pBufferList,
+				void **ppDataOut, uint32_t * pLength)
+{
+	*ppDataOut = pBufferList->pBuffers->pData;
+	*pLength = pBufferList->pBuffers->dataLenInBytes;
+}
+
+/* Name        : icp_ocfDrvBufferListMemInfo
+ *
+ * Description : This function will set the number of flat buffers in 
+ * bufferlist, the size of memory to allocate for the pPrivateMetaData 
+ * member of the CpaBufferList.
+ */
+int
+icp_ocfDrvBufferListMemInfo(uint16_t numBuffers,
+			    struct icp_drvBuffListInfo *buffListInfo)
+{
+	buffListInfo->numBuffers = numBuffers;
+
+	if (CPA_STATUS_SUCCESS !=
+	    cpaCyBufferListGetMetaSize(CPA_INSTANCE_HANDLE_SINGLE,
+				       buffListInfo->numBuffers,
+				       &(buffListInfo->metaSize))) {
+		EPRINTK("%s() Failed to get buffer list meta size.\n",
+			__FUNCTION__);
+		return ICP_OCF_DRV_STATUS_FAIL;
+	}
+
+	return ICP_OCF_DRV_STATUS_SUCCESS;
+}
+
+/* Name        : icp_ocfDrvFreeFlatBuffer
+ *
+ * Description : This function will deallocate flat buffer.
+ */
+inline void icp_ocfDrvFreeFlatBuffer(CpaFlatBuffer * pFlatBuffer)
+{
+	if (pFlatBuffer != NULL) {
+		memset(pFlatBuffer, 0, sizeof(CpaFlatBuffer));
+		ICP_CACHE_FREE(drvFlatBuffer_zone, pFlatBuffer);
+	}
+}
+
+/* Name        : icp_ocfDrvAllocMetaData
+ *
+ * Description : This function will allocate memory for the
+ * pPrivateMetaData member of CpaBufferList.
+ */
+inline int
+icp_ocfDrvAllocMetaData(CpaBufferList * pBufferList,
+			struct icp_drvOpData *pOpData)
+{
+	Cpa32U metaSize = 0;
+
+	if (pBufferList->numBuffers <= ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS) {
+		uint8_t *pOpDataStartAddr = (uint8_t *) pOpData;
+
+		if (0 == defBuffListInfo.metaSize) {
+			pBufferList->pPrivateMetaData = NULL;
+			return ICP_OCF_DRV_STATUS_SUCCESS;
+		}
+		/*
+		 * The meta data allocation has been included as part of the 
+		 * op data.  It has been pre-allocated in memory just after the
+		 * icp_drvOpData structure.
+		 */
+		pBufferList->pPrivateMetaData = (void *)(pOpDataStartAddr +
+							 sizeof(struct
+								icp_drvOpData));
+	} else {
+		if (CPA_STATUS_SUCCESS !=
+		    cpaCyBufferListGetMetaSize(CPA_INSTANCE_HANDLE_SINGLE,
+					       pBufferList->numBuffers,
+					       &metaSize)) {
+			EPRINTK("%s() Failed to get buffer list meta size.\n",
+				__FUNCTION__);
+			return ICP_OCF_DRV_STATUS_FAIL;
+		}
+
+		if (0 == metaSize) {
+			pBufferList->pPrivateMetaData = NULL;
+			return ICP_OCF_DRV_STATUS_SUCCESS;
+		}
+
+		pBufferList->pPrivateMetaData =
+		    icp_kmalloc(metaSize, ICP_M_NOWAIT);
+	}
+	if (NULL == pBufferList->pPrivateMetaData) {
+		EPRINTK("%s() Failed to allocate pPrivateMetaData.\n",
+			__FUNCTION__);
+		return ICP_OCF_DRV_STATUS_FAIL;
+	}
+
+	return ICP_OCF_DRV_STATUS_SUCCESS;
+}
+
+/* Name        : icp_ocfDrvFreeMetaData
+ *
+ * Description : This function will deallocate pPrivateMetaData memory.
+ */
+inline void icp_ocfDrvFreeMetaData(CpaBufferList * pBufferList)
+{
+	if (NULL == pBufferList->pPrivateMetaData) {
+		return;
+	}
+
+	/*
+	 * Only free the meta data if the BufferList has more than 
+	 * ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS number of buffers.
+	 * Otherwise, the meta data shall be freed when the icp_drvOpData is
+	 * freed.
+	 */
+	if (ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS < pBufferList->numBuffers) {
+		icp_kfree(pBufferList->pPrivateMetaData);
+	}
+}
+
+/* Module declaration, init and exit functions */
+ICP_DECLARE_MODULE(icp_ocf, icp_ocfDrvInit, icp_ocfDrvExit);
+ICP_MODULE_DESCRIPTION("OCF Driver for Intel Quick Assist crypto acceleration");
+ICP_MODULE_VERSION(icp_ocf, ICP_OCF_VER_MJR);
+ICP_MODULE_LICENSE("Dual BSD/GPL");
+ICP_MODULE_AUTHOR("Intel");
+
+/* Module parameters */
+ICP_MODULE_PARAM_INT(icp_ocf, num_dereg_retries,
+		     "Number of times to retry LAC Sym Session Deregistration. "
+		     "Default 10, Max 100");
+ICP_MODULE_PARAM_INT(icp_ocf, dereg_retry_delay_in_jiffies, "Delay in jiffies "
+		     "(added to a schedule() function call) before a LAC Sym "
+		     "Session Dereg is retried. Default 10");
+ICP_MODULE_PARAM_INT(icp_ocf, max_sessions,
+		     "This sets the maximum number of sessions "
+		     "between OCF and this driver. If this value is set to zero,"
+		     "max session count checking is disabled. Default is zero(0)");
+
+/* Module dependencies */
+#define MODULE_MIN_VER	1
+#define CRYPTO_MAX_VER	3
+#define LAC_MAX_VER	2
+
+ICP_MODULE_DEPEND(icp_ocf, crypto, MODULE_MIN_VER, MODULE_MIN_VER,
+		  CRYPTO_MAX_VER);
+ICP_MODULE_DEPEND(icp_ocf, cryptodev, MODULE_MIN_VER, MODULE_MIN_VER,
+		  CRYPTO_MAX_VER);
+ICP_MODULE_DEPEND(icp_ocf, icp_crypto, MODULE_MIN_VER, MODULE_MIN_VER,
+		  LAC_MAX_VER);
diff --git a/target/linux/generic/files/crypto/ocf/ep80579/icp_ocf.h b/target/linux/generic/files/crypto/ocf/ep80579/icp_ocf.h
new file mode 100644
index 0000000000..d9dde87402
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/ep80579/icp_ocf.h
@@ -0,0 +1,376 @@
+/***************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or 
+ *   redistributing this file, you may do so under either license.
+ * 
+ *   GPL LICENSE SUMMARY
+ * 
+ *   Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
+ * 
+ *   This program is free software; you can redistribute it and/or modify 
+ *   it under the terms of version 2 of the GNU General Public License as
+ *   published by the Free Software Foundation.
+ * 
+ *   This program is distributed in the hope that it will be useful, but 
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of 
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU 
+ *   General Public License for more details.
+ * 
+ *   You should have received a copy of the GNU General Public License 
+ *   along with this program; if not, write to the Free Software 
+ *   Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *   The full GNU General Public License is included in this distribution 
+ *   in the file called LICENSE.GPL.
+ * 
+ *   Contact Information:
+ *   Intel Corporation
+ * 
+ *   BSD LICENSE 
+ * 
+ *   Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ * 
+ *   Redistribution and use in source and binary forms, with or without 
+ *   modification, are permitted provided that the following conditions 
+ *   are met:
+ * 
+ *     * Redistributions of source code must retain the above copyright 
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright 
+ *       notice, this list of conditions and the following disclaimer in 
+ *       the documentation and/or other materials provided with the 
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its 
+ *       contributors may be used to endorse or promote products derived 
+ *       from this software without specific prior written permission.
+ * 
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ * 
+ *  version: Security.L.1.0.2-229
+ *
+ ***************************************************************************/
+
+/*
+ * OCF driver header file for the Intel ICP processor.
+ */
+
+#ifndef ICP_OCF_H_
+#define ICP_OCF_H_
+
+#include <cpa.h>
+#include <cpa_cy_im.h>
+#include <cpa_cy_sym.h>
+#include <cpa_cy_rand.h>
+#include <cpa_cy_dh.h>
+#include <cpa_cy_rsa.h>
+#include <cpa_cy_ln.h>
+#include <cpa_cy_common.h>
+#include <cpa_cy_dsa.h>
+
+#include "icp_os.h"
+
+#define NUM_BITS_IN_BYTE (8)
+#define NUM_BITS_IN_BYTE_MINUS_ONE (NUM_BITS_IN_BYTE -1)
+#define INVALID_DRIVER_ID (-1)
+#define RETURN_RAND_NUM_GEN_FAILED (-1)
+
+/*This is the max block cipher initialisation vector*/
+#define MAX_IV_LEN_IN_BYTES (20)
+/*This is used to check whether the OCF to this driver session limit has
+  been disabled*/
+#define NO_OCF_TO_DRV_MAX_SESSIONS		(0)
+
+/*OCF values mapped here*/
+#define ICP_SHA1_DIGEST_SIZE_IN_BYTES 		(SHA1_HASH_LEN)
+#define ICP_SHA256_DIGEST_SIZE_IN_BYTES 	(SHA2_256_HASH_LEN)
+#define ICP_SHA384_DIGEST_SIZE_IN_BYTES 	(SHA2_384_HASH_LEN)
+#define ICP_SHA512_DIGEST_SIZE_IN_BYTES 	(SHA2_512_HASH_LEN)
+#define ICP_MD5_DIGEST_SIZE_IN_BYTES 		(MD5_HASH_LEN)
+#define ARC4_COUNTER_LEN 			(ARC4_BLOCK_LEN)
+
+#define OCF_REGISTRATION_STATUS_SUCCESS 	(0)
+#define OCF_ZERO_FUNCTIONALITY_REGISTERED 	(0)
+#define ICP_OCF_DRV_NO_CRYPTO_PROCESS_ERROR 	(0)
+#define ICP_OCF_DRV_STATUS_SUCCESS 		(0)
+#define ICP_OCF_DRV_STATUS_FAIL 		(1)
+
+/*Turn on/off debug options*/
+#define ICP_OCF_PRINT_DEBUG_MESSAGES		(0)
+#define ICP_OCF_PRINT_KERN_ALERT		(1)
+#define ICP_OCF_PRINT_KERN_ERRS			(1)
+
+#if ICP_OCF_PRINT_DEBUG_MESSAGES == 1
+#define DPRINTK(args...)      \
+{			      \
+                ICP_IPRINTK(args); \
+}
+
+#else				//ICP_OCF_PRINT_DEBUG_MESSAGES == 1
+
+#define DPRINTK(args...)
+
+#endif				//ICP_OCF_PRINT_DEBUG_MESSAGES == 1
+
+#if ICP_OCF_PRINT_KERN_ALERT == 1
+#define APRINTK(args...)      						\
+{			      						\
+       ICP_APRINTK(args);						\
+}
+
+#else				//ICP_OCF_PRINT_KERN_ALERT == 1
+
+#define APRINTK(args...)
+
+#endif				//ICP_OCF_PRINT_KERN_ALERT == 1
+
+#if ICP_OCF_PRINT_KERN_ERRS == 1
+#define EPRINTK(args...)      \
+{			      \
+       ICP_EPRINTK(args); \
+}
+
+#else				//ICP_OCF_PRINT_KERN_ERRS == 1
+
+#define EPRINTK(args...)
+
+#endif				//ICP_OCF_PRINT_KERN_ERRS == 1
+
+#define IPRINTK(args...)      \
+{			      \
+      ICP_IPRINTK(args); \
+}
+
+/*DSA Prime Q size in bytes (as defined in the standard) */
+#define DSA_RS_SIGN_PRIMEQ_SIZE_IN_BYTES	(20)
+
+#define BITS_TO_BYTES(bytes, bits) 					\
+	bytes = (bits + NUM_BITS_IN_BYTE_MINUS_ONE) / NUM_BITS_IN_BYTE
+
+typedef enum {
+	ICP_OCF_DRV_ALG_CIPHER = 0,
+	ICP_OCF_DRV_ALG_HASH
+} icp_ocf_drv_alg_type_t;
+
+typedef ICP_LIST_HEAD(icp_drvSessionListHead_s,
+		      icp_drvSessionData) icp_drvSessionListHead_t;
+
+/*Values used to derisk chances of performs being called against
+deregistered sessions (for which the slab page has been reclaimed)
+This is not a fix - since page frames are reclaimed from a slab, one cannot
+rely on that memory not being re-used by another app.*/
+typedef enum {
+	ICP_SESSION_INITIALISED = 0x5C5C5C,
+	ICP_SESSION_RUNNING = 0x005C00,
+	ICP_SESSION_DEREGISTERED = 0xC5C5C5
+} usage_derisk;
+
+/* This struct is required for deferred session
+ deregistration as a work queue function can
+ only have one argument*/
+struct icp_ocfDrvFreeLacSession {
+	CpaCySymSessionCtx sessionToDeregister;
+	icp_workstruct work;
+};
+
+/*
+This is the OCF<->OCF_DRV session object:
+
+1.listNode
+  The first member is a listNode. These session objects are added to a linked
+  list in order to make it easier to remove them all at session exit time.
+
+2.inUse
+  The second member is used to give the session object state and derisk the
+  possibility of OCF batch calls executing against a deregistered session (as
+  described above).
+
+3.sessHandle
+  The third member is a LAC<->OCF_DRV session handle (initialised with the first
+  perform request for that session).
+
+4.lacSessCtx
+  The fourth is the LAC session context. All the parameters for this structure
+  are only known when the first perform request for this session occurs. That is
+  why the OCF EP80579 Driver only registers a new LAC session at perform time
+*/
+struct icp_drvSessionData {
+	ICP_LIST_ENTRY(icp_drvSessionData) listNode;
+	usage_derisk inUse;
+	CpaCySymSessionCtx sessHandle;
+	CpaCySymSessionSetupData lacSessCtx;
+};
+
+/* These are all defined in icp_common.c */
+extern icp_atomic_t lac_session_failed_dereg_count;
+extern icp_atomic_t icp_ocfDrvIsExiting;
+extern icp_atomic_t num_ocf_to_drv_registered_sessions;
+
+extern int32_t icp_ocfDrvDriverId;
+
+extern icp_drvSessionListHead_t icp_ocfDrvGlobalSymListHead;
+extern icp_drvSessionListHead_t icp_ocfDrvGlobalSymListHead_FreeMemList;
+extern icp_workqueue *icp_ocfDrvFreeLacSessionWorkQ;
+extern icp_spinlock_t icp_ocfDrvSymSessInfoListSpinlock;
+
+/*Slab zones for symettric functionality, instantiated in icp_common.c*/
+extern icp_kmem_cache drvSessionData_zone;
+extern icp_kmem_cache drvOpData_zone;
+
+/*Slabs zones for asymettric functionality, instantiated in icp_common.c*/
+extern icp_kmem_cache drvDH_zone;
+extern icp_kmem_cache drvLnModExp_zone;
+extern icp_kmem_cache drvRSADecrypt_zone;
+extern icp_kmem_cache drvRSAPrivateKey_zone;
+extern icp_kmem_cache drvDSARSSign_zone;
+extern icp_kmem_cache drvDSARSSignKValue_zone;
+extern icp_kmem_cache drvDSAVerify_zone;
+
+/* Module parameters defined in icp_cpmmon.c*/
+
+/* Module parameters - gives the number of times LAC deregistration shall be
+   re-tried */
+extern int num_dereg_retries;
+
+/* Module parameter - gives the delay time in jiffies before a LAC session 
+   shall be attempted to be deregistered again */
+extern int dereg_retry_delay_in_jiffies;
+
+/* Module parameter - gives the maximum number of sessions possible between
+   OCF and the OCF EP80579 Driver. If set to zero, there is no limit.*/
+extern int max_sessions;
+
+/*Slab zones for flatbuffers and bufferlist*/
+extern icp_kmem_cache drvFlatBuffer_zone;
+
+#define ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS     (16)
+
+struct icp_drvBuffListInfo {
+	Cpa16U numBuffers;
+	Cpa32U metaSize;
+	Cpa32U metaOffset;
+	Cpa32U buffListSize;
+};
+
+extern struct icp_drvBuffListInfo defBuffListInfo;
+
+/* This struct is used to keep a reference to the relevant node in the list
+   of sessionData structs, to the buffer type required by OCF and to the OCF
+   provided crp struct that needs to be returned. All this info is needed in
+   the callback function.*/
+struct icp_drvOpData {
+	CpaCySymOpData lacOpData;
+	uint32_t digestSizeInBytes;
+	struct cryptop *crp;
+	uint8_t bufferType;
+	uint8_t ivData[MAX_IV_LEN_IN_BYTES];
+	uint16_t numBufferListArray;
+	CpaBufferList srcBuffer;
+	CpaFlatBuffer bufferListArray[ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS];
+	CpaBoolean verifyResult;
+};
+
+/* Create a new session between OCF and this driver*/
+int icp_ocfDrvNewSession(icp_device_t dev, uint32_t * sild,
+			 struct cryptoini *cri);
+
+/* Free a session between this driver and the Quick Assist Framework*/
+int icp_ocfDrvFreeLACSession(icp_device_t dev, uint64_t sid);
+
+/* Defer freeing a Quick Assist session*/
+void icp_ocfDrvDeferedFreeLacSessionProcess(void *arg);
+
+/* Process OCF cryptographic request for a symmetric algorithm*/
+int icp_ocfDrvSymProcess(icp_device_t dev, struct cryptop *crp, int hint);
+
+/* Process OCF cryptographic request for an asymmetric algorithm*/
+int icp_ocfDrvPkeProcess(icp_device_t dev, struct cryptkop *krp, int hint);
+
+/* Populate a buffer with random data*/
+int icp_ocfDrvReadRandom(void *arg, uint32_t * buf, int maxwords);
+
+/* Retry Quick Assist session deregistration*/
+int icp_ocfDrvDeregRetry(CpaCySymSessionCtx sessionToDeregister);
+
+/* Convert an OS scatter gather list to a CPA buffer list*/
+int icp_ocfDrvPacketBuffToBufferList(icp_packet_buffer_t * pPacketBuffer,
+				     CpaBufferList * bufferList);
+
+/* Convert a CPA buffer list to an OS scatter gather list*/
+int icp_ocfDrvBufferListToPacketBuff(CpaBufferList * bufferList,
+				     icp_packet_buffer_t ** pPacketBuffer);
+
+/* Get the number of buffers in an OS scatter gather list*/
+uint16_t icp_ocfDrvGetPacketBuffFrags(icp_packet_buffer_t * pPacketBuffer);
+
+/* Convert a single OS buffer to a CPA Flat Buffer*/
+void icp_ocfDrvSinglePacketBuffToFlatBuffer(icp_packet_buffer_t * pPacketBuffer,
+					    CpaFlatBuffer * pFlatBuffer);
+
+/* Add pointer and length to a CPA Flat Buffer structure*/
+void icp_ocfDrvPtrAndLenToFlatBuffer(void *pData, uint32_t len,
+				     CpaFlatBuffer * pFlatBuffer);
+
+/* Convert pointer and length values to a CPA buffer list*/
+void icp_ocfDrvPtrAndLenToBufferList(void *pDataIn, uint32_t length,
+				     CpaBufferList * pBufferList);
+
+/* Convert a CPA buffer list to pointer and length values*/
+void icp_ocfDrvBufferListToPtrAndLen(CpaBufferList * pBufferList,
+				     void **ppDataOut, uint32_t * pLength);
+
+/* Set the number of flat buffers in bufferlist and the size of memory
+   to allocate for the pPrivateMetaData member of the CpaBufferList.*/
+int icp_ocfDrvBufferListMemInfo(uint16_t numBuffers,
+				struct icp_drvBuffListInfo *buffListInfo);
+
+/* Find pointer position of the digest within an OS scatter gather list*/
+uint8_t *icp_ocfDrvPacketBufferDigestPointerFind(struct icp_drvOpData
+						 *drvOpData,
+						 int offsetInBytes,
+						 uint32_t digestSizeInBytes);
+
+/*This top level function is used to find a pointer to where a digest is 
+  stored/needs to be inserted. */
+uint8_t *icp_ocfDrvDigestPointerFind(struct icp_drvOpData *drvOpData,
+				     struct cryptodesc *crp_desc);
+
+/* Free a CPA flat buffer*/
+void icp_ocfDrvFreeFlatBuffer(CpaFlatBuffer * pFlatBuffer);
+
+/* This function will allocate memory for the pPrivateMetaData
+   member of CpaBufferList. */
+int icp_ocfDrvAllocMetaData(CpaBufferList * pBufferList,
+			    struct icp_drvOpData *pOpData);
+
+/* Free data allocated for the pPrivateMetaData
+   member of CpaBufferList.*/
+void icp_ocfDrvFreeMetaData(CpaBufferList * pBufferList);
+
+#define ICP_CACHE_CREATE(cache_ID, cache_name) \
+	icp_kmem_cache_create(cache_ID, sizeof(cache_name),ICP_KERNEL_CACHE_ALIGN,\
+	ICP_KERNEL_CACHE_NOINIT)
+
+#define ICP_CACHE_FREE(args...) \
+	icp_kmem_cache_free (args)
+
+#define ICP_CACHE_DESTROY(slab_zone)\
+{\
+        if(NULL != slab_zone){\
+                icp_kmem_cache_destroy(slab_zone);\
+                slab_zone = NULL;\
+        }\
+}
+
+#endif
+/* ICP_OCF_H_ */
diff --git a/target/linux/generic/files/crypto/ocf/ep80579/icp_sym.c b/target/linux/generic/files/crypto/ocf/ep80579/icp_sym.c
new file mode 100644
index 0000000000..e1c71484a6
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/ep80579/icp_sym.c
@@ -0,0 +1,1153 @@
+/***************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or 
+ *   redistributing this file, you may do so under either license.
+ * 
+ *   GPL LICENSE SUMMARY
+ * 
+ *   Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
+ * 
+ *   This program is free software; you can redistribute it and/or modify 
+ *   it under the terms of version 2 of the GNU General Public License as
+ *   published by the Free Software Foundation.
+ * 
+ *   This program is distributed in the hope that it will be useful, but 
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of 
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU 
+ *   General Public License for more details.
+ * 
+ *   You should have received a copy of the GNU General Public License 
+ *   along with this program; if not, write to the Free Software 
+ *   Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *   The full GNU General Public License is included in this distribution 
+ *   in the file called LICENSE.GPL.
+ * 
+ *   Contact Information:
+ *   Intel Corporation
+ * 
+ *   BSD LICENSE 
+ * 
+ *   Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ * 
+ *   Redistribution and use in source and binary forms, with or without 
+ *   modification, are permitted provided that the following conditions 
+ *   are met:
+ * 
+ *     * Redistributions of source code must retain the above copyright 
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright 
+ *       notice, this list of conditions and the following disclaimer in 
+ *       the documentation and/or other materials provided with the 
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its 
+ *       contributors may be used to endorse or promote products derived 
+ *       from this software without specific prior written permission.
+ * 
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ * 
+ *  version: Security.L.1.0.2-229
+ *
+ ***************************************************************************/
+/*
+ * An OCF module that uses the API for Intel® QuickAssist Technology to do the
+ * cryptography.
+ *
+ * This driver requires the ICP Access Library that is available from Intel in
+ * order to operate.
+ */
+
+#include "icp_ocf.h"
+
+/*This is the call back function for all symmetric cryptographic processes.
+  Its main functionality is to free driver crypto operation structure and to 
+  call back to OCF*/
+static void
+icp_ocfDrvSymCallBack(void *callbackTag,
+		      CpaStatus status,
+		      const CpaCySymOp operationType,
+		      void *pOpData,
+		      CpaBufferList * pDstBuffer, CpaBoolean verifyResult);
+
+/*This function is used to extract crypto processing information from the OCF
+  inputs, so as that it may be passed onto LAC*/
+static int
+icp_ocfDrvProcessDataSetup(struct icp_drvOpData *drvOpData,
+			   struct cryptodesc *crp_desc);
+
+/*This function checks whether the crp_desc argument pertains to a digest or a
+  cipher operation*/
+static int icp_ocfDrvAlgCheck(struct cryptodesc *crp_desc);
+
+/*This function copies all the passed in session context information and stores
+  it in a LAC context structure*/
+static int
+icp_ocfDrvAlgorithmSetup(struct cryptoini *cri,
+			 CpaCySymSessionSetupData * lacSessCtx);
+
+/*This function is used to free an OCF->OCF_DRV session object*/
+static void icp_ocfDrvFreeOCFSession(struct icp_drvSessionData *sessionData);
+
+/*max IOV buffs supported in a UIO structure*/
+#define NUM_IOV_SUPPORTED		(1)
+
+/* Name        : icp_ocfDrvSymCallBack
+ *
+ * Description : When this function returns it signifies that the LAC
+ * component has completed the relevant symmetric operation. 
+ *
+ * Notes : The callbackTag is a pointer to an icp_drvOpData. This memory
+ * object was passed to LAC for the cryptographic processing and contains all
+ * the relevant information for cleaning up buffer handles etc. so that the
+ * OCF EP80579 Driver portion of this crypto operation can be fully completed.
+ */
+static void
+icp_ocfDrvSymCallBack(void *callbackTag,
+		      CpaStatus status,
+		      const CpaCySymOp operationType,
+		      void *pOpData,
+		      CpaBufferList * pDstBuffer, CpaBoolean verifyResult)
+{
+	struct cryptop *crp = NULL;
+	struct icp_drvOpData *temp_drvOpData =
+	    (struct icp_drvOpData *)callbackTag;
+	uint64_t *tempBasePtr = NULL;
+	uint32_t tempLen = 0;
+
+	if (NULL == temp_drvOpData) {
+		DPRINTK("%s(): The callback from the LAC component"
+			" has failed due to Null userOpaque data"
+			"(status == %d).\n", __FUNCTION__, status);
+		DPRINTK("%s(): Unable to call OCF back! \n", __FUNCTION__);
+		return;
+	}
+
+	crp = temp_drvOpData->crp;
+	crp->crp_etype = ICP_OCF_DRV_NO_CRYPTO_PROCESS_ERROR;
+
+	if (NULL == pOpData) {
+		DPRINTK("%s(): The callback from the LAC component"
+			" has failed due to Null Symmetric Op data"
+			"(status == %d).\n", __FUNCTION__, status);
+		crp->crp_etype = ECANCELED;
+		crypto_done(crp);
+		return;
+	}
+
+	if (NULL == pDstBuffer) {
+		DPRINTK("%s(): The callback from the LAC component"
+			" has failed due to Null Dst Bufferlist data"
+			"(status == %d).\n", __FUNCTION__, status);
+		crp->crp_etype = ECANCELED;
+		crypto_done(crp);
+		return;
+	}
+
+	if (CPA_STATUS_SUCCESS == status) {
+
+		if (temp_drvOpData->bufferType == ICP_CRYPTO_F_PACKET_BUF) {
+			if (ICP_OCF_DRV_STATUS_SUCCESS !=
+			    icp_ocfDrvBufferListToPacketBuff(pDstBuffer,
+							     (icp_packet_buffer_t
+							      **)
+							     & (crp->crp_buf))) {
+				EPRINTK("%s(): BufferList to SkBuff "
+					"conversion error.\n", __FUNCTION__);
+				crp->crp_etype = EPERM;
+			}
+		} else {
+			icp_ocfDrvBufferListToPtrAndLen(pDstBuffer,
+							(void **)&tempBasePtr,
+							&tempLen);
+			crp->crp_olen = (int)tempLen;
+		}
+
+	} else {
+		DPRINTK("%s(): The callback from the LAC component has failed"
+			"(status == %d).\n", __FUNCTION__, status);
+
+		crp->crp_etype = ECANCELED;
+	}
+
+	if (temp_drvOpData->numBufferListArray >
+	    ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS) {
+		icp_kfree(pDstBuffer->pBuffers);
+	}
+	icp_ocfDrvFreeMetaData(pDstBuffer);
+	ICP_CACHE_FREE(drvOpData_zone, temp_drvOpData);
+
+	/* Invoke the OCF callback function */
+	crypto_done(crp);
+
+	return;
+}
+
+/* Name        : icp_ocfDrvNewSession 
+ *
+ * Description : This function will create a new Driver<->OCF session
+ *
+ * Notes : LAC session registration happens during the first perform call.
+ * That is the first time we know all information about a given session.
+ */
+int icp_ocfDrvNewSession(icp_device_t dev, uint32_t * sid,
+			 struct cryptoini *cri)
+{
+	struct icp_drvSessionData *sessionData = NULL;
+	uint32_t delete_session = 0;
+
+	/* The SID passed in should be our driver ID. We can return the     */
+	/* local ID (LID) which is a unique identifier which we can use     */
+	/* to differentiate between the encrypt/decrypt LAC session handles */
+	if (NULL == sid) {
+		EPRINTK("%s(): Invalid input parameters - NULL sid.\n",
+			__FUNCTION__);
+		return EINVAL;
+	}
+
+	if (NULL == cri) {
+		EPRINTK("%s(): Invalid input parameters - NULL cryptoini.\n",
+			__FUNCTION__);
+		return EINVAL;
+	}
+
+	if (icp_ocfDrvDriverId != *sid) {
+		EPRINTK("%s(): Invalid input parameters - bad driver ID\n",
+			__FUNCTION__);
+		EPRINTK("\t sid = 0x08%p \n \t cri = 0x08%p \n", sid, cri);
+		return EINVAL;
+	}
+
+	sessionData = icp_kmem_cache_zalloc(drvSessionData_zone, ICP_M_NOWAIT);
+	if (NULL == sessionData) {
+		DPRINTK("%s():No memory for Session Data\n", __FUNCTION__);
+		return ENOMEM;
+	}
+
+	/*ENTER CRITICAL SECTION */
+	icp_spin_lockbh_lock(&icp_ocfDrvSymSessInfoListSpinlock);
+	/*put this check in the spinlock so no new sessions can be added to the
+	   linked list when we are exiting */
+	if (CPA_TRUE == icp_atomic_read(&icp_ocfDrvIsExiting)) {
+		delete_session++;
+
+	} else if (NO_OCF_TO_DRV_MAX_SESSIONS != max_sessions) {
+		if (icp_atomic_read(&num_ocf_to_drv_registered_sessions) >=
+		    (max_sessions -
+		     icp_atomic_read(&lac_session_failed_dereg_count))) {
+			delete_session++;
+		} else {
+			icp_atomic_inc(&num_ocf_to_drv_registered_sessions);
+			/* Add to session data linked list */
+			ICP_LIST_ADD(sessionData, &icp_ocfDrvGlobalSymListHead,
+				     listNode);
+		}
+
+	} else if (NO_OCF_TO_DRV_MAX_SESSIONS == max_sessions) {
+		ICP_LIST_ADD(sessionData, &icp_ocfDrvGlobalSymListHead,
+			     listNode);
+	}
+
+	sessionData->inUse = ICP_SESSION_INITIALISED;
+
+	/*EXIT CRITICAL SECTION */
+	icp_spin_lockbh_unlock(&icp_ocfDrvSymSessInfoListSpinlock);
+
+	if (delete_session) {
+		DPRINTK("%s():No Session handles available\n", __FUNCTION__);
+		ICP_CACHE_FREE(drvSessionData_zone, sessionData);
+		return EPERM;
+	}
+
+	if (ICP_OCF_DRV_STATUS_SUCCESS !=
+	    icp_ocfDrvAlgorithmSetup(cri, &(sessionData->lacSessCtx))) {
+		DPRINTK("%s():algorithm not supported\n", __FUNCTION__);
+		icp_ocfDrvFreeOCFSession(sessionData);
+		return EINVAL;
+	}
+
+	if (cri->cri_next) {
+		if (cri->cri_next->cri_next != NULL) {
+			DPRINTK("%s():only two chained algorithms supported\n",
+				__FUNCTION__);
+			icp_ocfDrvFreeOCFSession(sessionData);
+			return EPERM;
+		}
+
+		if (ICP_OCF_DRV_STATUS_SUCCESS !=
+		    icp_ocfDrvAlgorithmSetup(cri->cri_next,
+					     &(sessionData->lacSessCtx))) {
+			DPRINTK("%s():second algorithm not supported\n",
+				__FUNCTION__);
+			icp_ocfDrvFreeOCFSession(sessionData);
+			return EINVAL;
+		}
+
+		sessionData->lacSessCtx.symOperation =
+		    CPA_CY_SYM_OP_ALGORITHM_CHAINING;
+	}
+
+	*sid = (uint32_t) sessionData;
+
+	return ICP_OCF_DRV_STATUS_SUCCESS;
+}
+
+/* Name        : icp_ocfDrvAlgorithmSetup
+ *
+ * Description : This function builds the session context data from the
+ * information supplied through OCF. Algorithm chain order and whether the
+ * session is Encrypt/Decrypt can only be found out at perform time however, so
+ * the session is registered with LAC at that time.
+ */
+static int
+icp_ocfDrvAlgorithmSetup(struct cryptoini *cri,
+			 CpaCySymSessionSetupData * lacSessCtx)
+{
+
+	lacSessCtx->sessionPriority = CPA_CY_PRIORITY_NORMAL;
+
+	switch (cri->cri_alg) {
+
+	case CRYPTO_NULL_CBC:
+		DPRINTK("%s(): NULL CBC\n", __FUNCTION__);
+		lacSessCtx->symOperation = CPA_CY_SYM_OP_CIPHER;
+		lacSessCtx->cipherSetupData.cipherAlgorithm =
+		    CPA_CY_SYM_CIPHER_NULL;
+		lacSessCtx->cipherSetupData.cipherKeyLenInBytes =
+		    cri->cri_klen / NUM_BITS_IN_BYTE;
+		lacSessCtx->cipherSetupData.pCipherKey = cri->cri_key;
+		break;
+
+	case CRYPTO_DES_CBC:
+		DPRINTK("%s(): DES CBC\n", __FUNCTION__);
+		lacSessCtx->symOperation = CPA_CY_SYM_OP_CIPHER;
+		lacSessCtx->cipherSetupData.cipherAlgorithm =
+		    CPA_CY_SYM_CIPHER_DES_CBC;
+		lacSessCtx->cipherSetupData.cipherKeyLenInBytes =
+		    cri->cri_klen / NUM_BITS_IN_BYTE;
+		lacSessCtx->cipherSetupData.pCipherKey = cri->cri_key;
+		break;
+
+	case CRYPTO_3DES_CBC:
+		DPRINTK("%s(): 3DES CBC\n", __FUNCTION__);
+		lacSessCtx->symOperation = CPA_CY_SYM_OP_CIPHER;
+		lacSessCtx->cipherSetupData.cipherAlgorithm =
+		    CPA_CY_SYM_CIPHER_3DES_CBC;
+		lacSessCtx->cipherSetupData.cipherKeyLenInBytes =
+		    cri->cri_klen / NUM_BITS_IN_BYTE;
+		lacSessCtx->cipherSetupData.pCipherKey = cri->cri_key;
+		break;
+
+	case CRYPTO_AES_CBC:
+		DPRINTK("%s(): AES CBC\n", __FUNCTION__);
+		lacSessCtx->symOperation = CPA_CY_SYM_OP_CIPHER;
+		lacSessCtx->cipherSetupData.cipherAlgorithm =
+		    CPA_CY_SYM_CIPHER_AES_CBC;
+		lacSessCtx->cipherSetupData.cipherKeyLenInBytes =
+		    cri->cri_klen / NUM_BITS_IN_BYTE;
+		lacSessCtx->cipherSetupData.pCipherKey = cri->cri_key;
+		break;
+
+	case CRYPTO_ARC4:
+		DPRINTK("%s(): ARC4\n", __FUNCTION__);
+		lacSessCtx->symOperation = CPA_CY_SYM_OP_CIPHER;
+		lacSessCtx->cipherSetupData.cipherAlgorithm =
+		    CPA_CY_SYM_CIPHER_ARC4;
+		lacSessCtx->cipherSetupData.cipherKeyLenInBytes =
+		    cri->cri_klen / NUM_BITS_IN_BYTE;
+		lacSessCtx->cipherSetupData.pCipherKey = cri->cri_key;
+		break;
+
+	case CRYPTO_SHA1:
+		DPRINTK("%s(): SHA1\n", __FUNCTION__);
+		lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH;
+		lacSessCtx->hashSetupData.hashAlgorithm = CPA_CY_SYM_HASH_SHA1;
+		lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_PLAIN;
+		lacSessCtx->hashSetupData.digestResultLenInBytes =
+		    (cri->cri_mlen ?
+		     cri->cri_mlen : ICP_SHA1_DIGEST_SIZE_IN_BYTES);
+
+		break;
+
+	case CRYPTO_SHA1_HMAC:
+		DPRINTK("%s(): SHA1_HMAC\n", __FUNCTION__);
+		lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH;
+		lacSessCtx->hashSetupData.hashAlgorithm = CPA_CY_SYM_HASH_SHA1;
+		lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_AUTH;
+		lacSessCtx->hashSetupData.digestResultLenInBytes =
+		    (cri->cri_mlen ?
+		     cri->cri_mlen : ICP_SHA1_DIGEST_SIZE_IN_BYTES);
+		lacSessCtx->hashSetupData.authModeSetupData.authKey =
+		    cri->cri_key;
+		lacSessCtx->hashSetupData.authModeSetupData.authKeyLenInBytes =
+		    cri->cri_klen / NUM_BITS_IN_BYTE;
+		lacSessCtx->hashSetupData.authModeSetupData.aadLenInBytes = 0;
+
+		break;
+
+	case CRYPTO_SHA2_256:
+		DPRINTK("%s(): SHA256\n", __FUNCTION__);
+		lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH;
+		lacSessCtx->hashSetupData.hashAlgorithm =
+		    CPA_CY_SYM_HASH_SHA256;
+		lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_PLAIN;
+		lacSessCtx->hashSetupData.digestResultLenInBytes =
+		    (cri->cri_mlen ?
+		     cri->cri_mlen : ICP_SHA256_DIGEST_SIZE_IN_BYTES);
+
+		break;
+
+	case CRYPTO_SHA2_256_HMAC:
+		DPRINTK("%s(): SHA256_HMAC\n", __FUNCTION__);
+		lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH;
+		lacSessCtx->hashSetupData.hashAlgorithm =
+		    CPA_CY_SYM_HASH_SHA256;
+		lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_AUTH;
+		lacSessCtx->hashSetupData.digestResultLenInBytes =
+		    (cri->cri_mlen ?
+		     cri->cri_mlen : ICP_SHA256_DIGEST_SIZE_IN_BYTES);
+		lacSessCtx->hashSetupData.authModeSetupData.authKey =
+		    cri->cri_key;
+		lacSessCtx->hashSetupData.authModeSetupData.authKeyLenInBytes =
+		    cri->cri_klen / NUM_BITS_IN_BYTE;
+		lacSessCtx->hashSetupData.authModeSetupData.aadLenInBytes = 0;
+
+		break;
+
+	case CRYPTO_SHA2_384:
+		DPRINTK("%s(): SHA384\n", __FUNCTION__);
+		lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH;
+		lacSessCtx->hashSetupData.hashAlgorithm =
+		    CPA_CY_SYM_HASH_SHA384;
+		lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_PLAIN;
+		lacSessCtx->hashSetupData.digestResultLenInBytes =
+		    (cri->cri_mlen ?
+		     cri->cri_mlen : ICP_SHA384_DIGEST_SIZE_IN_BYTES);
+
+		break;
+
+	case CRYPTO_SHA2_384_HMAC:
+		DPRINTK("%s(): SHA384_HMAC\n", __FUNCTION__);
+		lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH;
+		lacSessCtx->hashSetupData.hashAlgorithm =
+		    CPA_CY_SYM_HASH_SHA384;
+		lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_AUTH;
+		lacSessCtx->hashSetupData.digestResultLenInBytes =
+		    (cri->cri_mlen ?
+		     cri->cri_mlen : ICP_SHA384_DIGEST_SIZE_IN_BYTES);
+		lacSessCtx->hashSetupData.authModeSetupData.authKey =
+		    cri->cri_key;
+		lacSessCtx->hashSetupData.authModeSetupData.authKeyLenInBytes =
+		    cri->cri_klen / NUM_BITS_IN_BYTE;
+		lacSessCtx->hashSetupData.authModeSetupData.aadLenInBytes = 0;
+
+		break;
+
+	case CRYPTO_SHA2_512:
+		DPRINTK("%s(): SHA512\n", __FUNCTION__);
+		lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH;
+		lacSessCtx->hashSetupData.hashAlgorithm =
+		    CPA_CY_SYM_HASH_SHA512;
+		lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_PLAIN;
+		lacSessCtx->hashSetupData.digestResultLenInBytes =
+		    (cri->cri_mlen ?
+		     cri->cri_mlen : ICP_SHA512_DIGEST_SIZE_IN_BYTES);
+
+		break;
+
+	case CRYPTO_SHA2_512_HMAC:
+		DPRINTK("%s(): SHA512_HMAC\n", __FUNCTION__);
+		lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH;
+		lacSessCtx->hashSetupData.hashAlgorithm =
+		    CPA_CY_SYM_HASH_SHA512;
+		lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_AUTH;
+		lacSessCtx->hashSetupData.digestResultLenInBytes =
+		    (cri->cri_mlen ?
+		     cri->cri_mlen : ICP_SHA512_DIGEST_SIZE_IN_BYTES);
+		lacSessCtx->hashSetupData.authModeSetupData.authKey =
+		    cri->cri_key;
+		lacSessCtx->hashSetupData.authModeSetupData.authKeyLenInBytes =
+		    cri->cri_klen / NUM_BITS_IN_BYTE;
+		lacSessCtx->hashSetupData.authModeSetupData.aadLenInBytes = 0;
+
+		break;
+
+	case CRYPTO_MD5:
+		DPRINTK("%s(): MD5\n", __FUNCTION__);
+		lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH;
+		lacSessCtx->hashSetupData.hashAlgorithm = CPA_CY_SYM_HASH_MD5;
+		lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_PLAIN;
+		lacSessCtx->hashSetupData.digestResultLenInBytes =
+		    (cri->cri_mlen ?
+		     cri->cri_mlen : ICP_MD5_DIGEST_SIZE_IN_BYTES);
+
+		break;
+
+	case CRYPTO_MD5_HMAC:
+		DPRINTK("%s(): MD5_HMAC\n", __FUNCTION__);
+		lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH;
+		lacSessCtx->hashSetupData.hashAlgorithm = CPA_CY_SYM_HASH_MD5;
+		lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_AUTH;
+		lacSessCtx->hashSetupData.digestResultLenInBytes =
+		    (cri->cri_mlen ?
+		     cri->cri_mlen : ICP_MD5_DIGEST_SIZE_IN_BYTES);
+		lacSessCtx->hashSetupData.authModeSetupData.authKey =
+		    cri->cri_key;
+		lacSessCtx->hashSetupData.authModeSetupData.authKeyLenInBytes =
+		    cri->cri_klen / NUM_BITS_IN_BYTE;
+		lacSessCtx->hashSetupData.authModeSetupData.aadLenInBytes = 0;
+
+		break;
+
+	default:
+		DPRINTK("%s(): ALG Setup FAIL\n", __FUNCTION__);
+		return ICP_OCF_DRV_STATUS_FAIL;
+	}
+
+	return ICP_OCF_DRV_STATUS_SUCCESS;
+}
+
+/* Name        : icp_ocfDrvFreeOCFSession
+ *
+ * Description : This function deletes all existing Session data representing
+ * the Cryptographic session established between OCF and this driver. This
+ * also includes freeing the memory allocated for the session context. The
+ * session object is also removed from the session linked list.
+ */
+static void icp_ocfDrvFreeOCFSession(struct icp_drvSessionData *sessionData)
+{
+
+	sessionData->inUse = ICP_SESSION_DEREGISTERED;
+
+	/*ENTER CRITICAL SECTION */
+	icp_spin_lockbh_lock(&icp_ocfDrvSymSessInfoListSpinlock);
+
+	if (CPA_TRUE == icp_atomic_read(&icp_ocfDrvIsExiting)) {
+		/*If the Driver is exiting, allow that process to
+		   handle any deletions */
+		/*EXIT CRITICAL SECTION */
+		icp_spin_lockbh_unlock(&icp_ocfDrvSymSessInfoListSpinlock);
+		return;
+	}
+
+	icp_atomic_dec(&num_ocf_to_drv_registered_sessions);
+
+	ICP_LIST_DEL(sessionData, listNode);
+
+	/*EXIT CRITICAL SECTION */
+	icp_spin_lockbh_unlock(&icp_ocfDrvSymSessInfoListSpinlock);
+
+	if (NULL != sessionData->sessHandle) {
+		icp_kfree(sessionData->sessHandle);
+	}
+	ICP_CACHE_FREE(drvSessionData_zone, sessionData);
+}
+
+/* Name        : icp_ocfDrvFreeLACSession
+ *
+ * Description : This attempts to deregister a LAC session. If it fails, the
+ * deregistation retry function is called.
+ */
+int icp_ocfDrvFreeLACSession(icp_device_t dev, uint64_t sid)
+{
+	CpaCySymSessionCtx sessionToDeregister = NULL;
+	struct icp_drvSessionData *sessionData = NULL;
+	CpaStatus lacStatus = CPA_STATUS_SUCCESS;
+	int retval = 0;
+
+	sessionData = (struct icp_drvSessionData *)CRYPTO_SESID2LID(sid);
+	if (NULL == sessionData) {
+		EPRINTK("%s(): OCF Free session called with Null Session ID.\n",
+			__FUNCTION__);
+		return EINVAL;
+	}
+
+	sessionToDeregister = sessionData->sessHandle;
+
+	if ((ICP_SESSION_INITIALISED != sessionData->inUse) &&
+	    (ICP_SESSION_RUNNING != sessionData->inUse) &&
+	    (ICP_SESSION_DEREGISTERED != sessionData->inUse)) {
+		DPRINTK("%s() Session not initialised.\n", __FUNCTION__);
+		return EINVAL;
+	}
+
+	if (ICP_SESSION_RUNNING == sessionData->inUse) {
+		lacStatus = cpaCySymRemoveSession(CPA_INSTANCE_HANDLE_SINGLE,
+						  sessionToDeregister);
+		if (CPA_STATUS_RETRY == lacStatus) {
+			if (ICP_OCF_DRV_STATUS_SUCCESS !=
+			    icp_ocfDrvDeregRetry(&sessionToDeregister)) {
+				/* the retry function increments the 
+				   dereg failed count */
+				DPRINTK("%s(): LAC failed to deregister the "
+					"session. (localSessionId= %p)\n",
+					__FUNCTION__, sessionToDeregister);
+				retval = EPERM;
+			}
+
+		} else if (CPA_STATUS_SUCCESS != lacStatus) {
+			DPRINTK("%s(): LAC failed to deregister the session. "
+				"localSessionId= %p, lacStatus = %d\n",
+				__FUNCTION__, sessionToDeregister, lacStatus);
+			icp_atomic_inc(&lac_session_failed_dereg_count);
+			retval = EPERM;
+		}
+	} else {
+		DPRINTK("%s() Session not registered with LAC.\n",
+			__FUNCTION__);
+	}
+
+	icp_ocfDrvFreeOCFSession(sessionData);
+	return retval;
+
+}
+
+/* Name        : icp_ocfDrvAlgCheck 
+ *
+ * Description : This function checks whether the cryptodesc argument pertains
+ * to a sym or hash function
+ */
+static int icp_ocfDrvAlgCheck(struct cryptodesc *crp_desc)
+{
+
+	if (crp_desc->crd_alg == CRYPTO_3DES_CBC ||
+	    crp_desc->crd_alg == CRYPTO_AES_CBC ||
+	    crp_desc->crd_alg == CRYPTO_DES_CBC ||
+	    crp_desc->crd_alg == CRYPTO_NULL_CBC ||
+	    crp_desc->crd_alg == CRYPTO_ARC4) {
+		return ICP_OCF_DRV_ALG_CIPHER;
+	}
+
+	return ICP_OCF_DRV_ALG_HASH;
+}
+
+/* Name        : icp_ocfDrvSymProcess 
+ *
+ * Description : This function will map symmetric functionality calls from OCF
+ * to the LAC API. It will also allocate memory to store the session context.
+ * 
+ * Notes: If it is the first perform call for a given session, then a LAC
+ * session is registered. After the session is registered, no checks as
+ * to whether session paramaters have changed (e.g. alg chain order) are
+ * done.
+ */
+int icp_ocfDrvSymProcess(icp_device_t dev, struct cryptop *crp, int hint)
+{
+	struct icp_drvSessionData *sessionData = NULL;
+	struct icp_drvOpData *drvOpData = NULL;
+	CpaStatus lacStatus = CPA_STATUS_SUCCESS;
+	Cpa32U sessionCtxSizeInBytes = 0;
+
+	if (NULL == crp) {
+		DPRINTK("%s(): Invalid input parameters, cryptop is NULL\n",
+			__FUNCTION__);
+		return EINVAL;
+	}
+
+	if (NULL == crp->crp_desc) {
+		DPRINTK("%s(): Invalid input parameters, no crp_desc attached "
+			"to crp\n", __FUNCTION__);
+		crp->crp_etype = EINVAL;
+		return EINVAL;
+	}
+
+	if (NULL == crp->crp_buf) {
+		DPRINTK("%s(): Invalid input parameters, no buffer attached "
+			"to crp\n", __FUNCTION__);
+		crp->crp_etype = EINVAL;
+		return EINVAL;
+	}
+
+	if (CPA_TRUE == icp_atomic_read(&icp_ocfDrvIsExiting)) {
+		crp->crp_etype = EFAULT;
+		return EFAULT;
+	}
+
+	sessionData = (struct icp_drvSessionData *)
+	    (CRYPTO_SESID2LID(crp->crp_sid));
+	if (NULL == sessionData) {
+		DPRINTK("%s(): Invalid input parameters, Null Session ID \n",
+			__FUNCTION__);
+		crp->crp_etype = EINVAL;
+		return EINVAL;
+	}
+
+/*If we get a request against a deregisted session, cancel operation*/
+	if (ICP_SESSION_DEREGISTERED == sessionData->inUse) {
+		DPRINTK("%s(): Session ID %d was deregistered \n",
+			__FUNCTION__, (int)(CRYPTO_SESID2LID(crp->crp_sid)));
+		crp->crp_etype = EFAULT;
+		return EFAULT;
+	}
+
+/*If none of the session states are set, then the session structure was either
+  not initialised properly or we are reading from a freed memory area (possible
+  due to OCF batch mode not removing queued requests against deregistered 
+  sessions*/
+	if (ICP_SESSION_INITIALISED != sessionData->inUse &&
+	    ICP_SESSION_RUNNING != sessionData->inUse) {
+		DPRINTK("%s(): Session - ID %d - not properly initialised or "
+			"memory freed back to the kernel \n",
+			__FUNCTION__, (int)(CRYPTO_SESID2LID(crp->crp_sid)));
+		crp->crp_etype = EINVAL;
+		return EINVAL;
+	}
+
+	/*For the below checks, remember error checking is already done in LAC.
+	   We're not validating inputs subsequent to registration */
+	if (sessionData->inUse == ICP_SESSION_INITIALISED) {
+		DPRINTK("%s(): Initialising session\n", __FUNCTION__);
+
+		if (NULL != crp->crp_desc->crd_next) {
+			if (ICP_OCF_DRV_ALG_CIPHER ==
+			    icp_ocfDrvAlgCheck(crp->crp_desc)) {
+
+				sessionData->lacSessCtx.algChainOrder =
+				    CPA_CY_SYM_ALG_CHAIN_ORDER_CIPHER_THEN_HASH;
+
+				if (crp->crp_desc->crd_flags & CRD_F_ENCRYPT) {
+					sessionData->lacSessCtx.cipherSetupData.
+					    cipherDirection =
+					    CPA_CY_SYM_CIPHER_DIRECTION_ENCRYPT;
+				} else {
+					sessionData->lacSessCtx.cipherSetupData.
+					    cipherDirection =
+					    CPA_CY_SYM_CIPHER_DIRECTION_DECRYPT;
+				}
+			} else {
+				sessionData->lacSessCtx.algChainOrder =
+				    CPA_CY_SYM_ALG_CHAIN_ORDER_HASH_THEN_CIPHER;
+
+				if (crp->crp_desc->crd_next->crd_flags &
+				    CRD_F_ENCRYPT) {
+					sessionData->lacSessCtx.cipherSetupData.
+					    cipherDirection =
+					    CPA_CY_SYM_CIPHER_DIRECTION_ENCRYPT;
+				} else {
+					sessionData->lacSessCtx.cipherSetupData.
+					    cipherDirection =
+					    CPA_CY_SYM_CIPHER_DIRECTION_DECRYPT;
+				}
+
+			}
+
+		} else if (ICP_OCF_DRV_ALG_CIPHER ==
+			   icp_ocfDrvAlgCheck(crp->crp_desc)) {
+			if (crp->crp_desc->crd_flags & CRD_F_ENCRYPT) {
+				sessionData->lacSessCtx.cipherSetupData.
+				    cipherDirection =
+				    CPA_CY_SYM_CIPHER_DIRECTION_ENCRYPT;
+			} else {
+				sessionData->lacSessCtx.cipherSetupData.
+				    cipherDirection =
+				    CPA_CY_SYM_CIPHER_DIRECTION_DECRYPT;
+			}
+
+		}
+
+		/*No action required for standalone Auth here */
+
+		/* Allocate memory for SymSessionCtx before the Session Registration */
+		lacStatus =
+		    cpaCySymSessionCtxGetSize(CPA_INSTANCE_HANDLE_SINGLE,
+					      &(sessionData->lacSessCtx),
+					      &sessionCtxSizeInBytes);
+		if (CPA_STATUS_SUCCESS != lacStatus) {
+			EPRINTK("%s(): cpaCySymSessionCtxGetSize failed - %d\n",
+				__FUNCTION__, lacStatus);
+			crp->crp_etype = EINVAL;
+			return EINVAL;
+		}
+		sessionData->sessHandle =
+		    icp_kmalloc(sessionCtxSizeInBytes, ICP_M_NOWAIT);
+		if (NULL == sessionData->sessHandle) {
+			EPRINTK
+			    ("%s(): Failed to get memory for SymSessionCtx\n",
+			     __FUNCTION__);
+			crp->crp_etype = ENOMEM;
+			return ENOMEM;
+		}
+
+		lacStatus = cpaCySymInitSession(CPA_INSTANCE_HANDLE_SINGLE,
+						icp_ocfDrvSymCallBack,
+						&(sessionData->lacSessCtx),
+						sessionData->sessHandle);
+
+		if (CPA_STATUS_SUCCESS != lacStatus) {
+			EPRINTK("%s(): cpaCySymInitSession failed -%d \n",
+				__FUNCTION__, lacStatus);
+			crp->crp_etype = EFAULT;
+			return EFAULT;
+		}
+
+		sessionData->inUse = ICP_SESSION_RUNNING;
+	}
+
+	drvOpData = icp_kmem_cache_zalloc(drvOpData_zone, ICP_M_NOWAIT);
+	if (NULL == drvOpData) {
+		EPRINTK("%s():Failed to get memory for drvOpData\n",
+			__FUNCTION__);
+		crp->crp_etype = ENOMEM;
+		return ENOMEM;
+	}
+
+	drvOpData->lacOpData.pSessionCtx = sessionData->sessHandle;
+	drvOpData->digestSizeInBytes = sessionData->lacSessCtx.hashSetupData.
+	    digestResultLenInBytes;
+	drvOpData->crp = crp;
+
+	/* Set the default buffer list array memory allocation */
+	drvOpData->srcBuffer.pBuffers = drvOpData->bufferListArray;
+	drvOpData->numBufferListArray = ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS;
+
+	if (ICP_OCF_DRV_STATUS_SUCCESS !=
+	    icp_ocfDrvProcessDataSetup(drvOpData, drvOpData->crp->crp_desc)) {
+		crp->crp_etype = EINVAL;
+		goto err;
+	}
+
+	if (drvOpData->crp->crp_desc->crd_next != NULL) {
+		if (icp_ocfDrvProcessDataSetup(drvOpData, drvOpData->crp->
+					       crp_desc->crd_next)) {
+			crp->crp_etype = EINVAL;
+			goto err;
+		}
+
+	}
+
+	/* 
+	 * Allocate buffer list array memory if the data fragment is more than
+	 * the default number (ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS) and not 
+	 * calculated already
+	 */
+	if (crp->crp_flags & ICP_CRYPTO_F_PACKET_BUF) {
+		if (NULL == drvOpData->lacOpData.pDigestResult) {
+			drvOpData->numBufferListArray =
+			    icp_ocfDrvGetPacketBuffFrags((icp_packet_buffer_t *)
+							 crp->crp_buf);
+		}
+
+		if (ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS <
+		    drvOpData->numBufferListArray) {
+			DPRINTK("%s() numBufferListArray more than default\n",
+				__FUNCTION__);
+			drvOpData->srcBuffer.pBuffers = NULL;
+			drvOpData->srcBuffer.pBuffers =
+			    icp_kmalloc(drvOpData->numBufferListArray *
+					sizeof(CpaFlatBuffer), ICP_M_NOWAIT);
+			if (NULL == drvOpData->srcBuffer.pBuffers) {
+				EPRINTK("%s() Failed to get memory for "
+					"pBuffers\n", __FUNCTION__);
+				ICP_CACHE_FREE(drvOpData_zone, drvOpData);
+				crp->crp_etype = ENOMEM;
+				return ENOMEM;
+			}
+		}
+	}
+
+	/*
+	 * Check the type of buffer structure we got and convert it into
+	 * CpaBufferList format.
+	 */
+	if (crp->crp_flags & ICP_CRYPTO_F_PACKET_BUF) {
+		if (ICP_OCF_DRV_STATUS_SUCCESS !=
+		    icp_ocfDrvPacketBuffToBufferList((icp_packet_buffer_t *)
+						     crp->crp_buf,
+						     &(drvOpData->srcBuffer))) {
+			EPRINTK("%s():Failed to translate from packet buffer "
+				"to bufferlist\n", __FUNCTION__);
+			crp->crp_etype = EINVAL;
+			goto err;
+		}
+
+		drvOpData->bufferType = ICP_CRYPTO_F_PACKET_BUF;
+	} else if (crp->crp_flags & CRYPTO_F_IOV) {
+		/* OCF only supports IOV of one entry. */
+		if (NUM_IOV_SUPPORTED ==
+		    ((struct uio *)(crp->crp_buf))->uio_iovcnt) {
+
+			icp_ocfDrvPtrAndLenToBufferList(((struct uio *)(crp->
+									crp_buf))->
+							uio_iov[0].iov_base,
+							((struct uio *)(crp->
+									crp_buf))->
+							uio_iov[0].iov_len,
+							&(drvOpData->
+							  srcBuffer));
+
+			drvOpData->bufferType = CRYPTO_F_IOV;
+
+		} else {
+			DPRINTK("%s():Unable to handle IOVs with lengths of "
+				"greater than one!\n", __FUNCTION__);
+			crp->crp_etype = EINVAL;
+			goto err;
+		}
+
+	} else {
+		icp_ocfDrvPtrAndLenToBufferList(crp->crp_buf,
+						crp->crp_ilen,
+						&(drvOpData->srcBuffer));
+
+		drvOpData->bufferType = CRYPTO_BUF_CONTIG;
+	}
+
+	/* Allocate srcBuffer's private meta data */
+	if (ICP_OCF_DRV_STATUS_SUCCESS !=
+	    icp_ocfDrvAllocMetaData(&(drvOpData->srcBuffer), drvOpData)) {
+		EPRINTK("%s() icp_ocfDrvAllocMetaData failed\n", __FUNCTION__);
+		memset(&(drvOpData->lacOpData), 0, sizeof(CpaCySymOpData));
+		crp->crp_etype = EINVAL;
+		goto err;
+	}
+
+	/* Perform "in-place" crypto operation */
+	lacStatus = cpaCySymPerformOp(CPA_INSTANCE_HANDLE_SINGLE,
+				      (void *)drvOpData,
+				      &(drvOpData->lacOpData),
+				      &(drvOpData->srcBuffer),
+				      &(drvOpData->srcBuffer),
+				      &(drvOpData->verifyResult));
+	if (CPA_STATUS_RETRY == lacStatus) {
+		DPRINTK("%s(): cpaCySymPerformOp retry, lacStatus = %d\n",
+			__FUNCTION__, lacStatus);
+		memset(&(drvOpData->lacOpData), 0, sizeof(CpaCySymOpData));
+		crp->crp_etype = ERESTART;
+		goto err;
+	}
+	if (CPA_STATUS_SUCCESS != lacStatus) {
+		EPRINTK("%s(): cpaCySymPerformOp failed, lacStatus = %d\n",
+			__FUNCTION__, lacStatus);
+		memset(&(drvOpData->lacOpData), 0, sizeof(CpaCySymOpData));
+		crp->crp_etype = EINVAL;
+		goto err;
+	}
+
+	return 0;		//OCF success status value
+
+      err:
+	if (drvOpData->numBufferListArray > ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS) {
+		icp_kfree(drvOpData->srcBuffer.pBuffers);
+	}
+	icp_ocfDrvFreeMetaData(&(drvOpData->srcBuffer));
+	ICP_CACHE_FREE(drvOpData_zone, drvOpData);
+
+	return crp->crp_etype;
+}
+
+/* Name        : icp_ocfDrvProcessDataSetup
+ *
+ * Description : This function will setup all the cryptographic operation data
+ *               that is required by LAC to execute the operation.
+ */
+static int icp_ocfDrvProcessDataSetup(struct icp_drvOpData *drvOpData,
+				      struct cryptodesc *crp_desc)
+{
+	CpaCyRandGenOpData randGenOpData;
+	CpaFlatBuffer randData;
+
+	drvOpData->lacOpData.packetType = CPA_CY_SYM_PACKET_TYPE_FULL;
+
+	/* Convert from the cryptop to the ICP LAC crypto parameters */
+	switch (crp_desc->crd_alg) {
+	case CRYPTO_NULL_CBC:
+		drvOpData->lacOpData.
+		    cryptoStartSrcOffsetInBytes = crp_desc->crd_skip;
+		drvOpData->lacOpData.
+		    messageLenToCipherInBytes = crp_desc->crd_len;
+		drvOpData->verifyResult = CPA_FALSE;
+		drvOpData->lacOpData.ivLenInBytes = NULL_BLOCK_LEN;
+		break;
+	case CRYPTO_DES_CBC:
+		drvOpData->lacOpData.
+		    cryptoStartSrcOffsetInBytes = crp_desc->crd_skip;
+		drvOpData->lacOpData.
+		    messageLenToCipherInBytes = crp_desc->crd_len;
+		drvOpData->verifyResult = CPA_FALSE;
+		drvOpData->lacOpData.ivLenInBytes = DES_BLOCK_LEN;
+		break;
+	case CRYPTO_3DES_CBC:
+		drvOpData->lacOpData.
+		    cryptoStartSrcOffsetInBytes = crp_desc->crd_skip;
+		drvOpData->lacOpData.
+		    messageLenToCipherInBytes = crp_desc->crd_len;
+		drvOpData->verifyResult = CPA_FALSE;
+		drvOpData->lacOpData.ivLenInBytes = DES3_BLOCK_LEN;
+		break;
+	case CRYPTO_ARC4:
+		drvOpData->lacOpData.
+		    cryptoStartSrcOffsetInBytes = crp_desc->crd_skip;
+		drvOpData->lacOpData.
+		    messageLenToCipherInBytes = crp_desc->crd_len;
+		drvOpData->verifyResult = CPA_FALSE;
+		drvOpData->lacOpData.ivLenInBytes = ARC4_COUNTER_LEN;
+		break;
+	case CRYPTO_AES_CBC:
+		drvOpData->lacOpData.
+		    cryptoStartSrcOffsetInBytes = crp_desc->crd_skip;
+		drvOpData->lacOpData.
+		    messageLenToCipherInBytes = crp_desc->crd_len;
+		drvOpData->verifyResult = CPA_FALSE;
+		drvOpData->lacOpData.ivLenInBytes = RIJNDAEL128_BLOCK_LEN;
+		break;
+	case CRYPTO_SHA1:
+	case CRYPTO_SHA1_HMAC:
+	case CRYPTO_SHA2_256:
+	case CRYPTO_SHA2_256_HMAC:
+	case CRYPTO_SHA2_384:
+	case CRYPTO_SHA2_384_HMAC:
+	case CRYPTO_SHA2_512:
+	case CRYPTO_SHA2_512_HMAC:
+	case CRYPTO_MD5:
+	case CRYPTO_MD5_HMAC:
+		drvOpData->lacOpData.
+		    hashStartSrcOffsetInBytes = crp_desc->crd_skip;
+		drvOpData->lacOpData.
+		    messageLenToHashInBytes = crp_desc->crd_len;
+		drvOpData->lacOpData.
+		    pDigestResult =
+		    icp_ocfDrvDigestPointerFind(drvOpData, crp_desc);
+
+		if (NULL == drvOpData->lacOpData.pDigestResult) {
+			DPRINTK("%s(): ERROR - could not calculate "
+				"Digest Result memory address\n", __FUNCTION__);
+			return ICP_OCF_DRV_STATUS_FAIL;
+		}
+
+		drvOpData->lacOpData.digestVerify = CPA_FALSE;
+		break;
+	default:
+		DPRINTK("%s(): Crypto process error - algorithm not "
+			"found \n", __FUNCTION__);
+		return ICP_OCF_DRV_STATUS_FAIL;
+	}
+
+	/* Figure out what the IV is supposed to be */
+	if ((crp_desc->crd_alg == CRYPTO_DES_CBC) ||
+	    (crp_desc->crd_alg == CRYPTO_3DES_CBC) ||
+	    (crp_desc->crd_alg == CRYPTO_AES_CBC)) {
+		/*ARC4 doesn't use an IV */
+		if (crp_desc->crd_flags & CRD_F_IV_EXPLICIT) {
+			/* Explicit IV provided to OCF */
+			drvOpData->lacOpData.pIv = crp_desc->crd_iv;
+		} else {
+			/* IV is not explicitly provided to OCF */
+
+			/* Point the LAC OP Data IV pointer to our allocated
+			   storage location for this session. */
+			drvOpData->lacOpData.pIv = drvOpData->ivData;
+
+			if ((crp_desc->crd_flags & CRD_F_ENCRYPT) &&
+			    ((crp_desc->crd_flags & CRD_F_IV_PRESENT) == 0)) {
+
+				/* Encrypting - need to create IV */
+				randGenOpData.generateBits = CPA_TRUE;
+				randGenOpData.lenInBytes = MAX_IV_LEN_IN_BYTES;
+
+				icp_ocfDrvPtrAndLenToFlatBuffer((Cpa8U *)
+								drvOpData->
+								ivData,
+								MAX_IV_LEN_IN_BYTES,
+								&randData);
+
+				if (CPA_STATUS_SUCCESS !=
+				    cpaCyRandGen(CPA_INSTANCE_HANDLE_SINGLE,
+						 NULL, NULL,
+						 &randGenOpData, &randData)) {
+					DPRINTK("%s(): ERROR - Failed to"
+						" generate"
+						" Initialisation Vector\n",
+						__FUNCTION__);
+					return ICP_OCF_DRV_STATUS_FAIL;
+				}
+
+				crypto_copyback(drvOpData->crp->
+						crp_flags,
+						drvOpData->crp->crp_buf,
+						crp_desc->crd_inject,
+						drvOpData->lacOpData.
+						ivLenInBytes,
+						(caddr_t) (drvOpData->lacOpData.
+							   pIv));
+			} else {
+				/* Reading IV from buffer */
+				crypto_copydata(drvOpData->crp->
+						crp_flags,
+						drvOpData->crp->crp_buf,
+						crp_desc->crd_inject,
+						drvOpData->lacOpData.
+						ivLenInBytes,
+						(caddr_t) (drvOpData->lacOpData.
+							   pIv));
+			}
+
+		}
+
+	}
+
+	return ICP_OCF_DRV_STATUS_SUCCESS;
+}
+
+/* Name        : icp_ocfDrvDigestPointerFind
+ *
+ * Description : This function is used to find the memory address of where the
+ * digest information shall be stored in. Input buffer types are an skbuff, iov
+ * or flat buffer. The address is found using the buffer data start address and
+ * an offset.
+ *
+ * Note: In the case of a linux skbuff, the digest address may exist within
+ * a memory space linked to from the start buffer. These linked memory spaces
+ * must be traversed by the data length offset in order to find the digest start
+ * address. Whether there is enough space for the digest must also be checked.
+ */
+uint8_t *icp_ocfDrvDigestPointerFind(struct icp_drvOpData * drvOpData,
+				     struct cryptodesc * crp_desc)
+{
+
+	int offsetInBytes = crp_desc->crd_inject;
+	uint32_t digestSizeInBytes = drvOpData->digestSizeInBytes;
+	uint8_t *flat_buffer_base = NULL;
+	int flat_buffer_length = 0;
+
+	if (drvOpData->crp->crp_flags & ICP_CRYPTO_F_PACKET_BUF) {
+
+		return icp_ocfDrvPacketBufferDigestPointerFind(drvOpData,
+							       offsetInBytes,
+							       digestSizeInBytes);
+
+	} else {
+		/* IOV or flat buffer */
+		if (drvOpData->crp->crp_flags & CRYPTO_F_IOV) {
+			/*single IOV check has already been done */
+			flat_buffer_base = ((struct uio *)
+					    (drvOpData->crp->crp_buf))->
+			    uio_iov[0].iov_base;
+			flat_buffer_length = ((struct uio *)
+					      (drvOpData->crp->crp_buf))->
+			    uio_iov[0].iov_len;
+		} else {
+			flat_buffer_base = (uint8_t *) drvOpData->crp->crp_buf;
+			flat_buffer_length = drvOpData->crp->crp_ilen;
+		}
+
+		if (flat_buffer_length < (offsetInBytes + digestSizeInBytes)) {
+			DPRINTK("%s() Not enough space for Digest "
+				"(IOV/Flat Buffer) \n", __FUNCTION__);
+			return NULL;
+		} else {
+			return (uint8_t *) (flat_buffer_base + offsetInBytes);
+		}
+	}
+	DPRINTK("%s() Should not reach this point\n", __FUNCTION__);
+	return NULL;
+}
diff --git a/target/linux/generic/files/crypto/ocf/hifn/Makefile b/target/linux/generic/files/crypto/ocf/hifn/Makefile
new file mode 100644
index 0000000000..163fed0543
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/hifn/Makefile
@@ -0,0 +1,13 @@
+# for SGlinux builds
+-include $(ROOTDIR)/modules/.config
+
+obj-$(CONFIG_OCF_HIFN)     += hifn7751.o
+obj-$(CONFIG_OCF_HIFNHIPP) += hifnHIPP.o
+
+obj ?= .
+EXTRA_CFLAGS += -I$(obj)/.. -I$(obj)/
+
+ifdef TOPDIR
+-include $(TOPDIR)/Rules.make
+endif
+
diff --git a/target/linux/generic/files/crypto/ocf/hifn/hifn7751.c b/target/linux/generic/files/crypto/ocf/hifn/hifn7751.c
new file mode 100644
index 0000000000..e7fd5bb5a3
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/hifn/hifn7751.c
@@ -0,0 +1,2978 @@
+/*	$OpenBSD: hifn7751.c,v 1.120 2002/05/17 00:33:34 deraadt Exp $	*/
+
+/*-
+ * Invertex AEON / Hifn 7751 driver
+ * Copyright (c) 1999 Invertex Inc. All rights reserved.
+ * Copyright (c) 1999 Theo de Raadt
+ * Copyright (c) 2000-2001 Network Security Technologies, Inc.
+ *			http://www.netsec.net
+ * Copyright (c) 2003 Hifn Inc.
+ *
+ * This driver is based on a previous driver by Invertex, for which they
+ * requested:  Please send any comments, feedback, bug-fixes, or feature
+ * requests to software@invertex.com.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in the
+ *   documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Effort sponsored in part by the Defense Advanced Research Projects
+ * Agency (DARPA) and Air Force Research Laboratory, Air Force
+ * Materiel Command, USAF, under agreement number F30602-01-2-0537.
+ *
+ *
+__FBSDID("$FreeBSD: src/sys/dev/hifn/hifn7751.c,v 1.40 2007/03/21 03:42:49 sam Exp $");
+ */
+
+/*
+ * Driver for various Hifn encryption processors.
+ */
+#ifndef AUTOCONF_INCLUDED
+#include <linux/config.h>
+#endif
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/wait.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/random.h>
+#include <linux/version.h>
+#include <linux/skbuff.h>
+#include <asm/io.h>
+
+#include <cryptodev.h>
+#include <uio.h>
+#include <hifn/hifn7751reg.h>
+#include <hifn/hifn7751var.h>
+
+#if 1
+#define	DPRINTF(a...)	if (hifn_debug) { \
+							printk("%s: ", sc ? \
+								device_get_nameunit(sc->sc_dev) : "hifn"); \
+							printk(a); \
+						} else
+#else
+#define	DPRINTF(a...)
+#endif
+
+static inline int
+pci_get_revid(struct pci_dev *dev)
+{
+	u8 rid = 0;
+	pci_read_config_byte(dev, PCI_REVISION_ID, &rid);
+	return rid;
+}
+
+static	struct hifn_stats hifnstats;
+
+#define	debug hifn_debug
+int hifn_debug = 0;
+module_param(hifn_debug, int, 0644);
+MODULE_PARM_DESC(hifn_debug, "Enable debug");
+
+int hifn_maxbatch = 1;
+module_param(hifn_maxbatch, int, 0644);
+MODULE_PARM_DESC(hifn_maxbatch, "max ops to batch w/o interrupt");
+
+int hifn_cache_linesize = 0x10;
+module_param(hifn_cache_linesize, int, 0444);
+MODULE_PARM_DESC(hifn_cache_linesize, "PCI config cache line size");
+
+#ifdef MODULE_PARM
+char *hifn_pllconfig = NULL;
+MODULE_PARM(hifn_pllconfig, "s");
+#else
+char hifn_pllconfig[32]; /* This setting is RO after loading */
+module_param_string(hifn_pllconfig, hifn_pllconfig, 32, 0444);
+#endif
+MODULE_PARM_DESC(hifn_pllconfig, "PLL config, ie., pci66, ext33, ...");
+
+#ifdef HIFN_VULCANDEV
+#include <sys/conf.h>
+#include <sys/uio.h>
+
+static struct cdevsw vulcanpk_cdevsw; /* forward declaration */
+#endif
+
+/*
+ * Prototypes and count for the pci_device structure
+ */
+static	int  hifn_probe(struct pci_dev *dev, const struct pci_device_id *ent);
+static	void hifn_remove(struct pci_dev *dev);
+
+static	int hifn_newsession(device_t, u_int32_t *, struct cryptoini *);
+static	int hifn_freesession(device_t, u_int64_t);
+static	int hifn_process(device_t, struct cryptop *, int);
+
+static device_method_t hifn_methods = {
+	/* crypto device methods */
+	DEVMETHOD(cryptodev_newsession,	hifn_newsession),
+	DEVMETHOD(cryptodev_freesession,hifn_freesession),
+	DEVMETHOD(cryptodev_process,	hifn_process),
+};
+
+static	void hifn_reset_board(struct hifn_softc *, int);
+static	void hifn_reset_puc(struct hifn_softc *);
+static	void hifn_puc_wait(struct hifn_softc *);
+static	int hifn_enable_crypto(struct hifn_softc *);
+static	void hifn_set_retry(struct hifn_softc *sc);
+static	void hifn_init_dma(struct hifn_softc *);
+static	void hifn_init_pci_registers(struct hifn_softc *);
+static	int hifn_sramsize(struct hifn_softc *);
+static	int hifn_dramsize(struct hifn_softc *);
+static	int hifn_ramtype(struct hifn_softc *);
+static	void hifn_sessions(struct hifn_softc *);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19)
+static irqreturn_t hifn_intr(int irq, void *arg);
+#else
+static irqreturn_t hifn_intr(int irq, void *arg, struct pt_regs *regs);
+#endif
+static	u_int hifn_write_command(struct hifn_command *, u_int8_t *);
+static	u_int32_t hifn_next_signature(u_int32_t a, u_int cnt);
+static	void hifn_callback(struct hifn_softc *, struct hifn_command *, u_int8_t *);
+static	int hifn_crypto(struct hifn_softc *, struct hifn_command *, struct cryptop *, int);
+static	int hifn_readramaddr(struct hifn_softc *, int, u_int8_t *);
+static	int hifn_writeramaddr(struct hifn_softc *, int, u_int8_t *);
+static	int hifn_dmamap_load_src(struct hifn_softc *, struct hifn_command *);
+static	int hifn_dmamap_load_dst(struct hifn_softc *, struct hifn_command *);
+static	int hifn_init_pubrng(struct hifn_softc *);
+static	void hifn_tick(unsigned long arg);
+static	void hifn_abort(struct hifn_softc *);
+static	void hifn_alloc_slot(struct hifn_softc *, int *, int *, int *, int *);
+
+static	void hifn_write_reg_0(struct hifn_softc *, bus_size_t, u_int32_t);
+static	void hifn_write_reg_1(struct hifn_softc *, bus_size_t, u_int32_t);
+
+#ifdef CONFIG_OCF_RANDOMHARVEST
+static	int hifn_read_random(void *arg, u_int32_t *buf, int len);
+#endif
+
+#define HIFN_MAX_CHIPS	8
+static struct hifn_softc *hifn_chip_idx[HIFN_MAX_CHIPS];
+
+static __inline u_int32_t
+READ_REG_0(struct hifn_softc *sc, bus_size_t reg)
+{
+	u_int32_t v = readl(sc->sc_bar0 + reg);
+	sc->sc_bar0_lastreg = (bus_size_t) -1;
+	return (v);
+}
+#define	WRITE_REG_0(sc, reg, val)	hifn_write_reg_0(sc, reg, val)
+
+static __inline u_int32_t
+READ_REG_1(struct hifn_softc *sc, bus_size_t reg)
+{
+	u_int32_t v = readl(sc->sc_bar1 + reg);
+	sc->sc_bar1_lastreg = (bus_size_t) -1;
+	return (v);
+}
+#define	WRITE_REG_1(sc, reg, val)	hifn_write_reg_1(sc, reg, val)
+
+/*
+ * map in a given buffer (great on some arches :-)
+ */
+
+static int
+pci_map_uio(struct hifn_softc *sc, struct hifn_operand *buf, struct uio *uio)
+{
+	struct iovec *iov = uio->uio_iov;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	buf->mapsize = 0;
+	for (buf->nsegs = 0; buf->nsegs < uio->uio_iovcnt; ) {
+		buf->segs[buf->nsegs].ds_addr = pci_map_single(sc->sc_pcidev,
+				iov->iov_base, iov->iov_len,
+				PCI_DMA_BIDIRECTIONAL);
+		buf->segs[buf->nsegs].ds_len = iov->iov_len;
+		buf->mapsize += iov->iov_len;
+		iov++;
+		buf->nsegs++;
+	}
+	/* identify this buffer by the first segment */
+	buf->map = (void *) buf->segs[0].ds_addr;
+	return(0);
+}
+
+/*
+ * map in a given sk_buff
+ */
+
+static int
+pci_map_skb(struct hifn_softc *sc,struct hifn_operand *buf,struct sk_buff *skb)
+{
+	int i;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	buf->mapsize = 0;
+
+	buf->segs[0].ds_addr = pci_map_single(sc->sc_pcidev,
+			skb->data, skb_headlen(skb), PCI_DMA_BIDIRECTIONAL);
+	buf->segs[0].ds_len = skb_headlen(skb);
+	buf->mapsize += buf->segs[0].ds_len;
+
+	buf->nsegs = 1;
+
+	for (i = 0; i < skb_shinfo(skb)->nr_frags; ) {
+		buf->segs[buf->nsegs].ds_len = skb_shinfo(skb)->frags[i].size;
+		buf->segs[buf->nsegs].ds_addr = pci_map_single(sc->sc_pcidev,
+				page_address(skb_shinfo(skb)->frags[i].page) +
+					skb_shinfo(skb)->frags[i].page_offset,
+				buf->segs[buf->nsegs].ds_len, PCI_DMA_BIDIRECTIONAL);
+		buf->mapsize += buf->segs[buf->nsegs].ds_len;
+		buf->nsegs++;
+	}
+
+	/* identify this buffer by the first segment */
+	buf->map = (void *) buf->segs[0].ds_addr;
+	return(0);
+}
+
+/*
+ * map in a given contiguous buffer
+ */
+
+static int
+pci_map_buf(struct hifn_softc *sc,struct hifn_operand *buf, void *b, int len)
+{
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	buf->mapsize = 0;
+	buf->segs[0].ds_addr = pci_map_single(sc->sc_pcidev,
+			b, len, PCI_DMA_BIDIRECTIONAL);
+	buf->segs[0].ds_len = len;
+	buf->mapsize += buf->segs[0].ds_len;
+	buf->nsegs = 1;
+
+	/* identify this buffer by the first segment */
+	buf->map = (void *) buf->segs[0].ds_addr;
+	return(0);
+}
+
+#if 0 /* not needed at this time */
+static void
+pci_sync_iov(struct hifn_softc *sc, struct hifn_operand *buf)
+{
+	int i;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+	for (i = 0; i < buf->nsegs; i++)
+		pci_dma_sync_single_for_cpu(sc->sc_pcidev, buf->segs[i].ds_addr,
+				buf->segs[i].ds_len, PCI_DMA_BIDIRECTIONAL);
+}
+#endif
+
+static void
+pci_unmap_buf(struct hifn_softc *sc, struct hifn_operand *buf)
+{
+	int i;
+	DPRINTF("%s()\n", __FUNCTION__);
+	for (i = 0; i < buf->nsegs; i++) {
+		pci_unmap_single(sc->sc_pcidev, buf->segs[i].ds_addr,
+				buf->segs[i].ds_len, PCI_DMA_BIDIRECTIONAL);
+		buf->segs[i].ds_addr = 0;
+		buf->segs[i].ds_len = 0;
+	}
+	buf->nsegs = 0;
+	buf->mapsize = 0;
+	buf->map = 0;
+}
+
+static const char*
+hifn_partname(struct hifn_softc *sc)
+{
+	/* XXX sprintf numbers when not decoded */
+	switch (pci_get_vendor(sc->sc_pcidev)) {
+	case PCI_VENDOR_HIFN:
+		switch (pci_get_device(sc->sc_pcidev)) {
+		case PCI_PRODUCT_HIFN_6500:	return "Hifn 6500";
+		case PCI_PRODUCT_HIFN_7751:	return "Hifn 7751";
+		case PCI_PRODUCT_HIFN_7811:	return "Hifn 7811";
+		case PCI_PRODUCT_HIFN_7951:	return "Hifn 7951";
+		case PCI_PRODUCT_HIFN_7955:	return "Hifn 7955";
+		case PCI_PRODUCT_HIFN_7956:	return "Hifn 7956";
+		}
+		return "Hifn unknown-part";
+	case PCI_VENDOR_INVERTEX:
+		switch (pci_get_device(sc->sc_pcidev)) {
+		case PCI_PRODUCT_INVERTEX_AEON:	return "Invertex AEON";
+		}
+		return "Invertex unknown-part";
+	case PCI_VENDOR_NETSEC:
+		switch (pci_get_device(sc->sc_pcidev)) {
+		case PCI_PRODUCT_NETSEC_7751:	return "NetSec 7751";
+		}
+		return "NetSec unknown-part";
+	}
+	return "Unknown-vendor unknown-part";
+}
+
+static u_int
+checkmaxmin(struct pci_dev *dev, const char *what, u_int v, u_int min, u_int max)
+{
+	struct hifn_softc *sc = pci_get_drvdata(dev);
+	if (v > max) {
+		device_printf(sc->sc_dev, "Warning, %s %u out of range, "
+			"using max %u\n", what, v, max);
+		v = max;
+	} else if (v < min) {
+		device_printf(sc->sc_dev, "Warning, %s %u out of range, "
+			"using min %u\n", what, v, min);
+		v = min;
+	}
+	return v;
+}
+
+/*
+ * Select PLL configuration for 795x parts.  This is complicated in
+ * that we cannot determine the optimal parameters without user input.
+ * The reference clock is derived from an external clock through a
+ * multiplier.  The external clock is either the host bus (i.e. PCI)
+ * or an external clock generator.  When using the PCI bus we assume
+ * the clock is either 33 or 66 MHz; for an external source we cannot
+ * tell the speed.
+ *
+ * PLL configuration is done with a string: "pci" for PCI bus, or "ext"
+ * for an external source, followed by the frequency.  We calculate
+ * the appropriate multiplier and PLL register contents accordingly.
+ * When no configuration is given we default to "pci66" since that
+ * always will allow the card to work.  If a card is using the PCI
+ * bus clock and in a 33MHz slot then it will be operating at half
+ * speed until the correct information is provided.
+ *
+ * We use a default setting of "ext66" because according to Mike Ham
+ * of HiFn, almost every board in existence has an external crystal
+ * populated at 66Mhz. Using PCI can be a problem on modern motherboards,
+ * because PCI33 can have clocks from 0 to 33Mhz, and some have
+ * non-PCI-compliant spread-spectrum clocks, which can confuse the pll.
+ */
+static void
+hifn_getpllconfig(struct pci_dev *dev, u_int *pll)
+{
+	const char *pllspec = hifn_pllconfig;
+	u_int freq, mul, fl, fh;
+	u_int32_t pllconfig;
+	char *nxt;
+
+	if (pllspec == NULL)
+		pllspec = "ext66";
+	fl = 33, fh = 66;
+	pllconfig = 0;
+	if (strncmp(pllspec, "ext", 3) == 0) {
+		pllspec += 3;
+		pllconfig |= HIFN_PLL_REF_SEL;
+		switch (pci_get_device(dev)) {
+		case PCI_PRODUCT_HIFN_7955:
+		case PCI_PRODUCT_HIFN_7956:
+			fl = 20, fh = 100;
+			break;
+#ifdef notyet
+		case PCI_PRODUCT_HIFN_7954:
+			fl = 20, fh = 66;
+			break;
+#endif
+		}
+	} else if (strncmp(pllspec, "pci", 3) == 0)
+		pllspec += 3;
+	freq = strtoul(pllspec, &nxt, 10);
+	if (nxt == pllspec)
+		freq = 66;
+	else
+		freq = checkmaxmin(dev, "frequency", freq, fl, fh);
+	/*
+	 * Calculate multiplier.  We target a Fck of 266 MHz,
+	 * allowing only even values, possibly rounded down.
+	 * Multipliers > 8 must set the charge pump current.
+	 */
+	mul = checkmaxmin(dev, "PLL divisor", (266 / freq) &~ 1, 2, 12);
+	pllconfig |= (mul / 2 - 1) << HIFN_PLL_ND_SHIFT;
+	if (mul > 8)
+		pllconfig |= HIFN_PLL_IS;
+	*pll = pllconfig;
+}
+
+/*
+ * Attach an interface that successfully probed.
+ */
+static int
+hifn_probe(struct pci_dev *dev, const struct pci_device_id *ent)
+{
+	struct hifn_softc *sc = NULL;
+	char rbase;
+	u_int16_t ena, rev;
+	int rseg, rc;
+	unsigned long mem_start, mem_len;
+	static int num_chips = 0;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	if (pci_enable_device(dev) < 0)
+		return(-ENODEV);
+
+#ifdef CONFIG_HAVE_PCI_SET_MWI
+	if (pci_set_mwi(dev))
+		return(-ENODEV);
+#endif
+
+	if (!dev->irq) {
+		printk("hifn: found device with no IRQ assigned. check BIOS settings!");
+		pci_disable_device(dev);
+		return(-ENODEV);
+	}
+
+	sc = (struct hifn_softc *) kmalloc(sizeof(*sc), GFP_KERNEL);
+	if (!sc)
+		return(-ENOMEM);
+	memset(sc, 0, sizeof(*sc));
+
+	softc_device_init(sc, "hifn", num_chips, hifn_methods);
+
+	sc->sc_pcidev = dev;
+	sc->sc_irq = -1;
+	sc->sc_cid = -1;
+	sc->sc_num = num_chips++;
+	if (sc->sc_num < HIFN_MAX_CHIPS)
+		hifn_chip_idx[sc->sc_num] = sc;
+
+	pci_set_drvdata(sc->sc_pcidev, sc);
+
+	spin_lock_init(&sc->sc_mtx);
+
+	/* XXX handle power management */
+
+	/*
+	 * The 7951 and 795x have a random number generator and
+	 * public key support; note this.
+	 */
+	if (pci_get_vendor(dev) == PCI_VENDOR_HIFN &&
+	    (pci_get_device(dev) == PCI_PRODUCT_HIFN_7951 ||
+	     pci_get_device(dev) == PCI_PRODUCT_HIFN_7955 ||
+	     pci_get_device(dev) == PCI_PRODUCT_HIFN_7956))
+		sc->sc_flags = HIFN_HAS_RNG | HIFN_HAS_PUBLIC;
+	/*
+	 * The 7811 has a random number generator and
+	 * we also note it's identity 'cuz of some quirks.
+	 */
+	if (pci_get_vendor(dev) == PCI_VENDOR_HIFN &&
+	    pci_get_device(dev) == PCI_PRODUCT_HIFN_7811)
+		sc->sc_flags |= HIFN_IS_7811 | HIFN_HAS_RNG;
+
+	/*
+	 * The 795x parts support AES.
+	 */
+	if (pci_get_vendor(dev) == PCI_VENDOR_HIFN &&
+	    (pci_get_device(dev) == PCI_PRODUCT_HIFN_7955 ||
+	     pci_get_device(dev) == PCI_PRODUCT_HIFN_7956)) {
+		sc->sc_flags |= HIFN_IS_7956 | HIFN_HAS_AES;
+		/*
+		 * Select PLL configuration.  This depends on the
+		 * bus and board design and must be manually configured
+		 * if the default setting is unacceptable.
+		 */
+		hifn_getpllconfig(dev, &sc->sc_pllconfig);
+	}
+
+	/*
+	 * Setup PCI resources. Note that we record the bus
+	 * tag and handle for each register mapping, this is
+	 * used by the READ_REG_0, WRITE_REG_0, READ_REG_1,
+	 * and WRITE_REG_1 macros throughout the driver.
+	 */
+	mem_start = pci_resource_start(sc->sc_pcidev, 0);
+	mem_len   = pci_resource_len(sc->sc_pcidev, 0);
+	sc->sc_bar0 = (ocf_iomem_t) ioremap(mem_start, mem_len);
+	if (!sc->sc_bar0) {
+		device_printf(sc->sc_dev, "cannot map bar%d register space\n", 0);
+		goto fail;
+	}
+	sc->sc_bar0_lastreg = (bus_size_t) -1;
+
+	mem_start = pci_resource_start(sc->sc_pcidev, 1);
+	mem_len   = pci_resource_len(sc->sc_pcidev, 1);
+	sc->sc_bar1 = (ocf_iomem_t) ioremap(mem_start, mem_len);
+	if (!sc->sc_bar1) {
+		device_printf(sc->sc_dev, "cannot map bar%d register space\n", 1);
+		goto fail;
+	}
+	sc->sc_bar1_lastreg = (bus_size_t) -1;
+
+	/* fix up the bus size */
+	if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) {
+		device_printf(sc->sc_dev, "No usable DMA configuration, aborting.\n");
+		goto fail;
+	}
+	if (pci_set_consistent_dma_mask(dev, DMA_32BIT_MASK)) {
+		device_printf(sc->sc_dev,
+				"No usable consistent DMA configuration, aborting.\n");
+		goto fail;
+	}
+
+	hifn_set_retry(sc);
+
+	/*
+	 * Setup the area where the Hifn DMA's descriptors
+	 * and associated data structures.
+	 */
+	sc->sc_dma = (struct hifn_dma *) pci_alloc_consistent(dev,
+			sizeof(*sc->sc_dma),
+			&sc->sc_dma_physaddr);
+	if (!sc->sc_dma) {
+		device_printf(sc->sc_dev, "cannot alloc sc_dma\n");
+		goto fail;
+	}
+	bzero(sc->sc_dma, sizeof(*sc->sc_dma));
+
+	/*
+	 * Reset the board and do the ``secret handshake''
+	 * to enable the crypto support.  Then complete the
+	 * initialization procedure by setting up the interrupt
+	 * and hooking in to the system crypto support so we'll
+	 * get used for system services like the crypto device,
+	 * IPsec, RNG device, etc.
+	 */
+	hifn_reset_board(sc, 0);
+
+	if (hifn_enable_crypto(sc) != 0) {
+		device_printf(sc->sc_dev, "crypto enabling failed\n");
+		goto fail;
+	}
+	hifn_reset_puc(sc);
+
+	hifn_init_dma(sc);
+	hifn_init_pci_registers(sc);
+
+	pci_set_master(sc->sc_pcidev);
+
+	/* XXX can't dynamically determine ram type for 795x; force dram */
+	if (sc->sc_flags & HIFN_IS_7956)
+		sc->sc_drammodel = 1;
+	else if (hifn_ramtype(sc))
+		goto fail;
+
+	if (sc->sc_drammodel == 0)
+		hifn_sramsize(sc);
+	else
+		hifn_dramsize(sc);
+
+	/*
+	 * Workaround for NetSec 7751 rev A: half ram size because two
+	 * of the address lines were left floating
+	 */
+	if (pci_get_vendor(dev) == PCI_VENDOR_NETSEC &&
+	    pci_get_device(dev) == PCI_PRODUCT_NETSEC_7751 &&
+	    pci_get_revid(dev) == 0x61)	/*XXX???*/
+		sc->sc_ramsize >>= 1;
+
+	/*
+	 * Arrange the interrupt line.
+	 */
+	rc = request_irq(dev->irq, hifn_intr, IRQF_SHARED, "hifn", sc);
+	if (rc) {
+		device_printf(sc->sc_dev, "could not map interrupt: %d\n", rc);
+		goto fail;
+	}
+	sc->sc_irq = dev->irq;
+
+	hifn_sessions(sc);
+
+	/*
+	 * NB: Keep only the low 16 bits; this masks the chip id
+	 *     from the 7951.
+	 */
+	rev = READ_REG_1(sc, HIFN_1_REVID) & 0xffff;
+
+	rseg = sc->sc_ramsize / 1024;
+	rbase = 'K';
+	if (sc->sc_ramsize >= (1024 * 1024)) {
+		rbase = 'M';
+		rseg /= 1024;
+	}
+	device_printf(sc->sc_dev, "%s, rev %u, %d%cB %cram",
+		hifn_partname(sc), rev,
+		rseg, rbase, sc->sc_drammodel ? 'd' : 's');
+	if (sc->sc_flags & HIFN_IS_7956)
+		printf(", pll=0x%x<%s clk, %ux mult>",
+			sc->sc_pllconfig,
+			sc->sc_pllconfig & HIFN_PLL_REF_SEL ? "ext" : "pci",
+			2 + 2*((sc->sc_pllconfig & HIFN_PLL_ND) >> 11));
+	printf("\n");
+
+	sc->sc_cid = crypto_get_driverid(softc_get_device(sc),CRYPTOCAP_F_HARDWARE);
+	if (sc->sc_cid < 0) {
+		device_printf(sc->sc_dev, "could not get crypto driver id\n");
+		goto fail;
+	}
+
+	WRITE_REG_0(sc, HIFN_0_PUCNFG,
+	    READ_REG_0(sc, HIFN_0_PUCNFG) | HIFN_PUCNFG_CHIPID);
+	ena = READ_REG_0(sc, HIFN_0_PUSTAT) & HIFN_PUSTAT_CHIPENA;
+
+	switch (ena) {
+	case HIFN_PUSTAT_ENA_2:
+		crypto_register(sc->sc_cid, CRYPTO_3DES_CBC, 0, 0);
+		crypto_register(sc->sc_cid, CRYPTO_ARC4, 0, 0);
+		if (sc->sc_flags & HIFN_HAS_AES)
+			crypto_register(sc->sc_cid, CRYPTO_AES_CBC, 0, 0);
+		/*FALLTHROUGH*/
+	case HIFN_PUSTAT_ENA_1:
+		crypto_register(sc->sc_cid, CRYPTO_MD5, 0, 0);
+		crypto_register(sc->sc_cid, CRYPTO_SHA1, 0, 0);
+		crypto_register(sc->sc_cid, CRYPTO_MD5_HMAC, 0, 0);
+		crypto_register(sc->sc_cid, CRYPTO_SHA1_HMAC, 0, 0);
+		crypto_register(sc->sc_cid, CRYPTO_DES_CBC, 0, 0);
+		break;
+	}
+
+	if (sc->sc_flags & (HIFN_HAS_PUBLIC | HIFN_HAS_RNG))
+		hifn_init_pubrng(sc);
+
+	init_timer(&sc->sc_tickto);
+	sc->sc_tickto.function = hifn_tick;
+	sc->sc_tickto.data = (unsigned long) sc->sc_num;
+	mod_timer(&sc->sc_tickto, jiffies + HZ);
+
+	return (0);
+
+fail:
+    if (sc->sc_cid >= 0)
+        crypto_unregister_all(sc->sc_cid);
+    if (sc->sc_irq != -1)
+        free_irq(sc->sc_irq, sc);
+    if (sc->sc_dma) {
+		/* Turn off DMA polling */
+		WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET |
+			HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE);
+
+        pci_free_consistent(sc->sc_pcidev,
+				sizeof(*sc->sc_dma),
+                sc->sc_dma, sc->sc_dma_physaddr);
+	}
+    kfree(sc);
+	return (-ENXIO);
+}
+
+/*
+ * Detach an interface that successfully probed.
+ */
+static void
+hifn_remove(struct pci_dev *dev)
+{
+	struct hifn_softc *sc = pci_get_drvdata(dev);
+	unsigned long l_flags;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	KASSERT(sc != NULL, ("hifn_detach: null software carrier!"));
+
+	/* disable interrupts */
+	HIFN_LOCK(sc);
+	WRITE_REG_1(sc, HIFN_1_DMA_IER, 0);
+	HIFN_UNLOCK(sc);
+
+	/*XXX other resources */
+	del_timer_sync(&sc->sc_tickto);
+
+	/* Turn off DMA polling */
+	WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET |
+	    HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE);
+
+	crypto_unregister_all(sc->sc_cid);
+
+	free_irq(sc->sc_irq, sc);
+
+	pci_free_consistent(sc->sc_pcidev, sizeof(*sc->sc_dma),
+                sc->sc_dma, sc->sc_dma_physaddr);
+}
+
+
+static int
+hifn_init_pubrng(struct hifn_softc *sc)
+{
+	int i;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	if ((sc->sc_flags & HIFN_IS_7811) == 0) {
+		/* Reset 7951 public key/rng engine */
+		WRITE_REG_1(sc, HIFN_1_PUB_RESET,
+		    READ_REG_1(sc, HIFN_1_PUB_RESET) | HIFN_PUBRST_RESET);
+
+		for (i = 0; i < 100; i++) {
+			DELAY(1000);
+			if ((READ_REG_1(sc, HIFN_1_PUB_RESET) &
+			    HIFN_PUBRST_RESET) == 0)
+				break;
+		}
+
+		if (i == 100) {
+			device_printf(sc->sc_dev, "public key init failed\n");
+			return (1);
+		}
+	}
+
+	/* Enable the rng, if available */
+#ifdef CONFIG_OCF_RANDOMHARVEST
+	if (sc->sc_flags & HIFN_HAS_RNG) {
+		if (sc->sc_flags & HIFN_IS_7811) {
+			u_int32_t r;
+			r = READ_REG_1(sc, HIFN_1_7811_RNGENA);
+			if (r & HIFN_7811_RNGENA_ENA) {
+				r &= ~HIFN_7811_RNGENA_ENA;
+				WRITE_REG_1(sc, HIFN_1_7811_RNGENA, r);
+			}
+			WRITE_REG_1(sc, HIFN_1_7811_RNGCFG,
+			    HIFN_7811_RNGCFG_DEFL);
+			r |= HIFN_7811_RNGENA_ENA;
+			WRITE_REG_1(sc, HIFN_1_7811_RNGENA, r);
+		} else
+			WRITE_REG_1(sc, HIFN_1_RNG_CONFIG,
+			    READ_REG_1(sc, HIFN_1_RNG_CONFIG) |
+			    HIFN_RNGCFG_ENA);
+
+		sc->sc_rngfirst = 1;
+		crypto_rregister(sc->sc_cid, hifn_read_random, sc);
+	}
+#endif
+
+	/* Enable public key engine, if available */
+	if (sc->sc_flags & HIFN_HAS_PUBLIC) {
+		WRITE_REG_1(sc, HIFN_1_PUB_IEN, HIFN_PUBIEN_DONE);
+		sc->sc_dmaier |= HIFN_DMAIER_PUBDONE;
+		WRITE_REG_1(sc, HIFN_1_DMA_IER, sc->sc_dmaier);
+#ifdef HIFN_VULCANDEV
+		sc->sc_pkdev = make_dev(&vulcanpk_cdevsw, 0, 
+					UID_ROOT, GID_WHEEL, 0666,
+					"vulcanpk");
+		sc->sc_pkdev->si_drv1 = sc;
+#endif
+	}
+
+	return (0);
+}
+
+#ifdef CONFIG_OCF_RANDOMHARVEST
+static int
+hifn_read_random(void *arg, u_int32_t *buf, int len)
+{
+	struct hifn_softc *sc = (struct hifn_softc *) arg;
+	u_int32_t sts;
+	int i, rc = 0;
+
+	if (len <= 0)
+		return rc;
+
+	if (sc->sc_flags & HIFN_IS_7811) {
+		/* ONLY VALID ON 7811!!!! */
+		for (i = 0; i < 5; i++) {
+			sts = READ_REG_1(sc, HIFN_1_7811_RNGSTS);
+			if (sts & HIFN_7811_RNGSTS_UFL) {
+				device_printf(sc->sc_dev,
+					      "RNG underflow: disabling\n");
+				/* DAVIDM perhaps return -1 */
+				break;
+			}
+			if ((sts & HIFN_7811_RNGSTS_RDY) == 0)
+				break;
+
+			/*
+			 * There are at least two words in the RNG FIFO
+			 * at this point.
+			 */
+			if (rc < len)
+				buf[rc++] = READ_REG_1(sc, HIFN_1_7811_RNGDAT);
+			if (rc < len)
+				buf[rc++] = READ_REG_1(sc, HIFN_1_7811_RNGDAT);
+		}
+	} else
+		buf[rc++] = READ_REG_1(sc, HIFN_1_RNG_DATA);
+
+	/* NB: discard first data read */
+	if (sc->sc_rngfirst) {
+		sc->sc_rngfirst = 0;
+		rc = 0;
+	}
+
+	return(rc);
+}
+#endif /* CONFIG_OCF_RANDOMHARVEST */
+
+static void
+hifn_puc_wait(struct hifn_softc *sc)
+{
+	int i;
+	int reg = HIFN_0_PUCTRL;
+
+	if (sc->sc_flags & HIFN_IS_7956) {
+		reg = HIFN_0_PUCTRL2;
+	}
+
+	for (i = 5000; i > 0; i--) {
+		DELAY(1);
+		if (!(READ_REG_0(sc, reg) & HIFN_PUCTRL_RESET))
+			break;
+	}
+	if (!i)
+		device_printf(sc->sc_dev, "proc unit did not reset(0x%x)\n",
+				READ_REG_0(sc, HIFN_0_PUCTRL));
+}
+
+/*
+ * Reset the processing unit.
+ */
+static void
+hifn_reset_puc(struct hifn_softc *sc)
+{
+	/* Reset processing unit */
+	int reg = HIFN_0_PUCTRL;
+
+	if (sc->sc_flags & HIFN_IS_7956) {
+		reg = HIFN_0_PUCTRL2;
+	}
+	WRITE_REG_0(sc, reg, HIFN_PUCTRL_DMAENA);
+
+	hifn_puc_wait(sc);
+}
+
+/*
+ * Set the Retry and TRDY registers; note that we set them to
+ * zero because the 7811 locks up when forced to retry (section
+ * 3.6 of "Specification Update SU-0014-04".  Not clear if we
+ * should do this for all Hifn parts, but it doesn't seem to hurt.
+ */
+static void
+hifn_set_retry(struct hifn_softc *sc)
+{
+	DPRINTF("%s()\n", __FUNCTION__);
+	/* NB: RETRY only responds to 8-bit reads/writes */
+	pci_write_config_byte(sc->sc_pcidev, HIFN_RETRY_TIMEOUT, 0);
+	pci_write_config_dword(sc->sc_pcidev, HIFN_TRDY_TIMEOUT, 0);
+	/* piggy back the cache line setting here */
+	pci_write_config_byte(sc->sc_pcidev, PCI_CACHE_LINE_SIZE, hifn_cache_linesize);
+}
+
+/*
+ * Resets the board.  Values in the regesters are left as is
+ * from the reset (i.e. initial values are assigned elsewhere).
+ */
+static void
+hifn_reset_board(struct hifn_softc *sc, int full)
+{
+	u_int32_t reg;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+	/*
+	 * Set polling in the DMA configuration register to zero.  0x7 avoids
+	 * resetting the board and zeros out the other fields.
+	 */
+	WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET |
+	    HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE);
+
+	/*
+	 * Now that polling has been disabled, we have to wait 1 ms
+	 * before resetting the board.
+	 */
+	DELAY(1000);
+
+	/* Reset the DMA unit */
+	if (full) {
+		WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MODE);
+		DELAY(1000);
+	} else {
+		WRITE_REG_1(sc, HIFN_1_DMA_CNFG,
+		    HIFN_DMACNFG_MODE | HIFN_DMACNFG_MSTRESET);
+		hifn_reset_puc(sc);
+	}
+
+	KASSERT(sc->sc_dma != NULL, ("hifn_reset_board: null DMA tag!"));
+	bzero(sc->sc_dma, sizeof(*sc->sc_dma));
+
+	/* Bring dma unit out of reset */
+	WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET |
+	    HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE);
+
+	hifn_puc_wait(sc);
+	hifn_set_retry(sc);
+
+	if (sc->sc_flags & HIFN_IS_7811) {
+		for (reg = 0; reg < 1000; reg++) {
+			if (READ_REG_1(sc, HIFN_1_7811_MIPSRST) &
+			    HIFN_MIPSRST_CRAMINIT)
+				break;
+			DELAY(1000);
+		}
+		if (reg == 1000)
+			device_printf(sc->sc_dev, ": cram init timeout\n");
+	} else {
+	  /* set up DMA configuration register #2 */
+	  /* turn off all PK and BAR0 swaps */
+	  WRITE_REG_1(sc, HIFN_1_DMA_CNFG2,
+		      (3 << HIFN_DMACNFG2_INIT_WRITE_BURST_SHIFT)|
+		      (3 << HIFN_DMACNFG2_INIT_READ_BURST_SHIFT)|
+		      (2 << HIFN_DMACNFG2_TGT_WRITE_BURST_SHIFT)|
+		      (2 << HIFN_DMACNFG2_TGT_READ_BURST_SHIFT));
+	}
+}
+
+static u_int32_t
+hifn_next_signature(u_int32_t a, u_int cnt)
+{
+	int i;
+	u_int32_t v;
+
+	for (i = 0; i < cnt; i++) {
+
+		/* get the parity */
+		v = a & 0x80080125;
+		v ^= v >> 16;
+		v ^= v >> 8;
+		v ^= v >> 4;
+		v ^= v >> 2;
+		v ^= v >> 1;
+
+		a = (v & 1) ^ (a << 1);
+	}
+
+	return a;
+}
+
+
+/*
+ * Checks to see if crypto is already enabled.  If crypto isn't enable,
+ * "hifn_enable_crypto" is called to enable it.  The check is important,
+ * as enabling crypto twice will lock the board.
+ */
+static int 
+hifn_enable_crypto(struct hifn_softc *sc)
+{
+	u_int32_t dmacfg, ramcfg, encl, addr, i;
+	char offtbl[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+					  0x00, 0x00, 0x00, 0x00 };
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	ramcfg = READ_REG_0(sc, HIFN_0_PUCNFG);
+	dmacfg = READ_REG_1(sc, HIFN_1_DMA_CNFG);
+
+	/*
+	 * The RAM config register's encrypt level bit needs to be set before
+	 * every read performed on the encryption level register.
+	 */
+	WRITE_REG_0(sc, HIFN_0_PUCNFG, ramcfg | HIFN_PUCNFG_CHIPID);
+
+	encl = READ_REG_0(sc, HIFN_0_PUSTAT) & HIFN_PUSTAT_CHIPENA;
+
+	/*
+	 * Make sure we don't re-unlock.  Two unlocks kills chip until the
+	 * next reboot.
+	 */
+	if (encl == HIFN_PUSTAT_ENA_1 || encl == HIFN_PUSTAT_ENA_2) {
+#ifdef HIFN_DEBUG
+		if (hifn_debug)
+			device_printf(sc->sc_dev,
+			    "Strong crypto already enabled!\n");
+#endif
+		goto report;
+	}
+
+	if (encl != 0 && encl != HIFN_PUSTAT_ENA_0) {
+#ifdef HIFN_DEBUG
+		if (hifn_debug)
+			device_printf(sc->sc_dev,
+			      "Unknown encryption level 0x%x\n", encl);
+#endif
+		return 1;
+	}
+
+	WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_UNLOCK |
+	    HIFN_DMACNFG_MSTRESET | HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE);
+	DELAY(1000);
+	addr = READ_REG_1(sc, HIFN_UNLOCK_SECRET1);
+	DELAY(1000);
+	WRITE_REG_1(sc, HIFN_UNLOCK_SECRET2, 0);
+	DELAY(1000);
+
+	for (i = 0; i <= 12; i++) {
+		addr = hifn_next_signature(addr, offtbl[i] + 0x101);
+		WRITE_REG_1(sc, HIFN_UNLOCK_SECRET2, addr);
+
+		DELAY(1000);
+	}
+
+	WRITE_REG_0(sc, HIFN_0_PUCNFG, ramcfg | HIFN_PUCNFG_CHIPID);
+	encl = READ_REG_0(sc, HIFN_0_PUSTAT) & HIFN_PUSTAT_CHIPENA;
+
+#ifdef HIFN_DEBUG
+	if (hifn_debug) {
+		if (encl != HIFN_PUSTAT_ENA_1 && encl != HIFN_PUSTAT_ENA_2)
+			device_printf(sc->sc_dev, "Engine is permanently "
+				"locked until next system reset!\n");
+		else
+			device_printf(sc->sc_dev, "Engine enabled "
+				"successfully!\n");
+	}
+#endif
+
+report:
+	WRITE_REG_0(sc, HIFN_0_PUCNFG, ramcfg);
+	WRITE_REG_1(sc, HIFN_1_DMA_CNFG, dmacfg);
+
+	switch (encl) {
+	case HIFN_PUSTAT_ENA_1:
+	case HIFN_PUSTAT_ENA_2:
+		break;
+	case HIFN_PUSTAT_ENA_0:
+	default:
+		device_printf(sc->sc_dev, "disabled\n");
+		break;
+	}
+
+	return 0;
+}
+
+/*
+ * Give initial values to the registers listed in the "Register Space"
+ * section of the HIFN Software Development reference manual.
+ */
+static void 
+hifn_init_pci_registers(struct hifn_softc *sc)
+{
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	/* write fixed values needed by the Initialization registers */
+	WRITE_REG_0(sc, HIFN_0_PUCTRL, HIFN_PUCTRL_DMAENA);
+	WRITE_REG_0(sc, HIFN_0_FIFOCNFG, HIFN_FIFOCNFG_THRESHOLD);
+	WRITE_REG_0(sc, HIFN_0_PUIER, HIFN_PUIER_DSTOVER);
+
+	/* write all 4 ring address registers */
+	WRITE_REG_1(sc, HIFN_1_DMA_CRAR, sc->sc_dma_physaddr +
+	    offsetof(struct hifn_dma, cmdr[0]));
+	WRITE_REG_1(sc, HIFN_1_DMA_SRAR, sc->sc_dma_physaddr +
+	    offsetof(struct hifn_dma, srcr[0]));
+	WRITE_REG_1(sc, HIFN_1_DMA_DRAR, sc->sc_dma_physaddr +
+	    offsetof(struct hifn_dma, dstr[0]));
+	WRITE_REG_1(sc, HIFN_1_DMA_RRAR, sc->sc_dma_physaddr +
+	    offsetof(struct hifn_dma, resr[0]));
+
+	DELAY(2000);
+
+	/* write status register */
+	WRITE_REG_1(sc, HIFN_1_DMA_CSR,
+	    HIFN_DMACSR_D_CTRL_DIS | HIFN_DMACSR_R_CTRL_DIS |
+	    HIFN_DMACSR_S_CTRL_DIS | HIFN_DMACSR_C_CTRL_DIS |
+	    HIFN_DMACSR_D_ABORT | HIFN_DMACSR_D_DONE | HIFN_DMACSR_D_LAST |
+	    HIFN_DMACSR_D_WAIT | HIFN_DMACSR_D_OVER |
+	    HIFN_DMACSR_R_ABORT | HIFN_DMACSR_R_DONE | HIFN_DMACSR_R_LAST |
+	    HIFN_DMACSR_R_WAIT | HIFN_DMACSR_R_OVER |
+	    HIFN_DMACSR_S_ABORT | HIFN_DMACSR_S_DONE | HIFN_DMACSR_S_LAST |
+	    HIFN_DMACSR_S_WAIT |
+	    HIFN_DMACSR_C_ABORT | HIFN_DMACSR_C_DONE | HIFN_DMACSR_C_LAST |
+	    HIFN_DMACSR_C_WAIT |
+	    HIFN_DMACSR_ENGINE |
+	    ((sc->sc_flags & HIFN_HAS_PUBLIC) ?
+		HIFN_DMACSR_PUBDONE : 0) |
+	    ((sc->sc_flags & HIFN_IS_7811) ?
+		HIFN_DMACSR_ILLW | HIFN_DMACSR_ILLR : 0));
+
+	sc->sc_d_busy = sc->sc_r_busy = sc->sc_s_busy = sc->sc_c_busy = 0;
+	sc->sc_dmaier |= HIFN_DMAIER_R_DONE | HIFN_DMAIER_C_ABORT |
+	    HIFN_DMAIER_D_OVER | HIFN_DMAIER_R_OVER |
+	    HIFN_DMAIER_S_ABORT | HIFN_DMAIER_D_ABORT | HIFN_DMAIER_R_ABORT |
+	    ((sc->sc_flags & HIFN_IS_7811) ?
+		HIFN_DMAIER_ILLW | HIFN_DMAIER_ILLR : 0);
+	sc->sc_dmaier &= ~HIFN_DMAIER_C_WAIT;
+	WRITE_REG_1(sc, HIFN_1_DMA_IER, sc->sc_dmaier);
+
+
+	if (sc->sc_flags & HIFN_IS_7956) {
+		u_int32_t pll;
+
+		WRITE_REG_0(sc, HIFN_0_PUCNFG, HIFN_PUCNFG_COMPSING |
+		    HIFN_PUCNFG_TCALLPHASES |
+		    HIFN_PUCNFG_TCDRVTOTEM | HIFN_PUCNFG_BUS32);
+
+		/* turn off the clocks and insure bypass is set */
+		pll = READ_REG_1(sc, HIFN_1_PLL);
+		pll = (pll &~ (HIFN_PLL_PK_CLK_SEL | HIFN_PLL_PE_CLK_SEL))
+		  | HIFN_PLL_BP | HIFN_PLL_MBSET;
+		WRITE_REG_1(sc, HIFN_1_PLL, pll);
+		DELAY(10*1000);		/* 10ms */
+
+		/* change configuration */
+		pll = (pll &~ HIFN_PLL_CONFIG) | sc->sc_pllconfig;
+		WRITE_REG_1(sc, HIFN_1_PLL, pll);
+		DELAY(10*1000);		/* 10ms */
+
+		/* disable bypass */
+		pll &= ~HIFN_PLL_BP;
+		WRITE_REG_1(sc, HIFN_1_PLL, pll);
+		/* enable clocks with new configuration */
+		pll |= HIFN_PLL_PK_CLK_SEL | HIFN_PLL_PE_CLK_SEL;
+		WRITE_REG_1(sc, HIFN_1_PLL, pll);
+	} else {
+		WRITE_REG_0(sc, HIFN_0_PUCNFG, HIFN_PUCNFG_COMPSING |
+		    HIFN_PUCNFG_DRFR_128 | HIFN_PUCNFG_TCALLPHASES |
+		    HIFN_PUCNFG_TCDRVTOTEM | HIFN_PUCNFG_BUS32 |
+		    (sc->sc_drammodel ? HIFN_PUCNFG_DRAM : HIFN_PUCNFG_SRAM));
+	}
+
+	WRITE_REG_0(sc, HIFN_0_PUISR, HIFN_PUISR_DSTOVER);
+	WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET |
+	    HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE | HIFN_DMACNFG_LAST |
+	    ((HIFN_POLL_FREQUENCY << 16 ) & HIFN_DMACNFG_POLLFREQ) |
+	    ((HIFN_POLL_SCALAR << 8) & HIFN_DMACNFG_POLLINVAL));
+}
+
+/*
+ * The maximum number of sessions supported by the card
+ * is dependent on the amount of context ram, which
+ * encryption algorithms are enabled, and how compression
+ * is configured.  This should be configured before this
+ * routine is called.
+ */
+static void
+hifn_sessions(struct hifn_softc *sc)
+{
+	u_int32_t pucnfg;
+	int ctxsize;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	pucnfg = READ_REG_0(sc, HIFN_0_PUCNFG);
+
+	if (pucnfg & HIFN_PUCNFG_COMPSING) {
+		if (pucnfg & HIFN_PUCNFG_ENCCNFG)
+			ctxsize = 128;
+		else
+			ctxsize = 512;
+		/*
+		 * 7955/7956 has internal context memory of 32K
+		 */
+		if (sc->sc_flags & HIFN_IS_7956)
+			sc->sc_maxses = 32768 / ctxsize;
+		else
+			sc->sc_maxses = 1 +
+			    ((sc->sc_ramsize - 32768) / ctxsize);
+	} else
+		sc->sc_maxses = sc->sc_ramsize / 16384;
+
+	if (sc->sc_maxses > 2048)
+		sc->sc_maxses = 2048;
+}
+
+/*
+ * Determine ram type (sram or dram).  Board should be just out of a reset
+ * state when this is called.
+ */
+static int
+hifn_ramtype(struct hifn_softc *sc)
+{
+	u_int8_t data[8], dataexpect[8];
+	int i;
+
+	for (i = 0; i < sizeof(data); i++)
+		data[i] = dataexpect[i] = 0x55;
+	if (hifn_writeramaddr(sc, 0, data))
+		return (-1);
+	if (hifn_readramaddr(sc, 0, data))
+		return (-1);
+	if (bcmp(data, dataexpect, sizeof(data)) != 0) {
+		sc->sc_drammodel = 1;
+		return (0);
+	}
+
+	for (i = 0; i < sizeof(data); i++)
+		data[i] = dataexpect[i] = 0xaa;
+	if (hifn_writeramaddr(sc, 0, data))
+		return (-1);
+	if (hifn_readramaddr(sc, 0, data))
+		return (-1);
+	if (bcmp(data, dataexpect, sizeof(data)) != 0) {
+		sc->sc_drammodel = 1;
+		return (0);
+	}
+
+	return (0);
+}
+
+#define	HIFN_SRAM_MAX		(32 << 20)
+#define	HIFN_SRAM_STEP_SIZE	16384
+#define	HIFN_SRAM_GRANULARITY	(HIFN_SRAM_MAX / HIFN_SRAM_STEP_SIZE)
+
+static int
+hifn_sramsize(struct hifn_softc *sc)
+{
+	u_int32_t a;
+	u_int8_t data[8];
+	u_int8_t dataexpect[sizeof(data)];
+	int32_t i;
+
+	for (i = 0; i < sizeof(data); i++)
+		data[i] = dataexpect[i] = i ^ 0x5a;
+
+	for (i = HIFN_SRAM_GRANULARITY - 1; i >= 0; i--) {
+		a = i * HIFN_SRAM_STEP_SIZE;
+		bcopy(&i, data, sizeof(i));
+		hifn_writeramaddr(sc, a, data);
+	}
+
+	for (i = 0; i < HIFN_SRAM_GRANULARITY; i++) {
+		a = i * HIFN_SRAM_STEP_SIZE;
+		bcopy(&i, dataexpect, sizeof(i));
+		if (hifn_readramaddr(sc, a, data) < 0)
+			return (0);
+		if (bcmp(data, dataexpect, sizeof(data)) != 0)
+			return (0);
+		sc->sc_ramsize = a + HIFN_SRAM_STEP_SIZE;
+	}
+
+	return (0);
+}
+
+/*
+ * XXX For dram boards, one should really try all of the
+ * HIFN_PUCNFG_DSZ_*'s.  This just assumes that PUCNFG
+ * is already set up correctly.
+ */
+static int
+hifn_dramsize(struct hifn_softc *sc)
+{
+	u_int32_t cnfg;
+
+	if (sc->sc_flags & HIFN_IS_7956) {
+		/*
+		 * 7955/7956 have a fixed internal ram of only 32K.
+		 */
+		sc->sc_ramsize = 32768;
+	} else {
+		cnfg = READ_REG_0(sc, HIFN_0_PUCNFG) &
+		    HIFN_PUCNFG_DRAMMASK;
+		sc->sc_ramsize = 1 << ((cnfg >> 13) + 18);
+	}
+	return (0);
+}
+
+static void
+hifn_alloc_slot(struct hifn_softc *sc, int *cmdp, int *srcp, int *dstp, int *resp)
+{
+	struct hifn_dma *dma = sc->sc_dma;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	if (dma->cmdi == HIFN_D_CMD_RSIZE) {
+		dma->cmdi = 0;
+		dma->cmdr[HIFN_D_CMD_RSIZE].l = htole32(HIFN_D_JUMP|HIFN_D_MASKDONEIRQ);
+		wmb();
+		dma->cmdr[HIFN_D_CMD_RSIZE].l |= htole32(HIFN_D_VALID);
+		HIFN_CMDR_SYNC(sc, HIFN_D_CMD_RSIZE,
+		    BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
+	}
+	*cmdp = dma->cmdi++;
+	dma->cmdk = dma->cmdi;
+
+	if (dma->srci == HIFN_D_SRC_RSIZE) {
+		dma->srci = 0;
+		dma->srcr[HIFN_D_SRC_RSIZE].l = htole32(HIFN_D_JUMP|HIFN_D_MASKDONEIRQ);
+		wmb();
+		dma->srcr[HIFN_D_SRC_RSIZE].l |= htole32(HIFN_D_VALID);
+		HIFN_SRCR_SYNC(sc, HIFN_D_SRC_RSIZE,
+		    BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
+	}
+	*srcp = dma->srci++;
+	dma->srck = dma->srci;
+
+	if (dma->dsti == HIFN_D_DST_RSIZE) {
+		dma->dsti = 0;
+		dma->dstr[HIFN_D_DST_RSIZE].l = htole32(HIFN_D_JUMP|HIFN_D_MASKDONEIRQ);
+		wmb();
+		dma->dstr[HIFN_D_DST_RSIZE].l |= htole32(HIFN_D_VALID);
+		HIFN_DSTR_SYNC(sc, HIFN_D_DST_RSIZE,
+		    BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
+	}
+	*dstp = dma->dsti++;
+	dma->dstk = dma->dsti;
+
+	if (dma->resi == HIFN_D_RES_RSIZE) {
+		dma->resi = 0;
+		dma->resr[HIFN_D_RES_RSIZE].l = htole32(HIFN_D_JUMP|HIFN_D_MASKDONEIRQ);
+		wmb();
+		dma->resr[HIFN_D_RES_RSIZE].l |= htole32(HIFN_D_VALID);
+		HIFN_RESR_SYNC(sc, HIFN_D_RES_RSIZE,
+		    BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
+	}
+	*resp = dma->resi++;
+	dma->resk = dma->resi;
+}
+
+static int
+hifn_writeramaddr(struct hifn_softc *sc, int addr, u_int8_t *data)
+{
+	struct hifn_dma *dma = sc->sc_dma;
+	hifn_base_command_t wc;
+	const u_int32_t masks = HIFN_D_VALID | HIFN_D_LAST | HIFN_D_MASKDONEIRQ;
+	int r, cmdi, resi, srci, dsti;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	wc.masks = htole16(3 << 13);
+	wc.session_num = htole16(addr >> 14);
+	wc.total_source_count = htole16(8);
+	wc.total_dest_count = htole16(addr & 0x3fff);
+
+	hifn_alloc_slot(sc, &cmdi, &srci, &dsti, &resi);
+
+	WRITE_REG_1(sc, HIFN_1_DMA_CSR,
+	    HIFN_DMACSR_C_CTRL_ENA | HIFN_DMACSR_S_CTRL_ENA |
+	    HIFN_DMACSR_D_CTRL_ENA | HIFN_DMACSR_R_CTRL_ENA);
+
+	/* build write command */
+	bzero(dma->command_bufs[cmdi], HIFN_MAX_COMMAND);
+	*(hifn_base_command_t *)dma->command_bufs[cmdi] = wc;
+	bcopy(data, &dma->test_src, sizeof(dma->test_src));
+
+	dma->srcr[srci].p = htole32(sc->sc_dma_physaddr
+	    + offsetof(struct hifn_dma, test_src));
+	dma->dstr[dsti].p = htole32(sc->sc_dma_physaddr
+	    + offsetof(struct hifn_dma, test_dst));
+
+	dma->cmdr[cmdi].l = htole32(16 | masks);
+	dma->srcr[srci].l = htole32(8 | masks);
+	dma->dstr[dsti].l = htole32(4 | masks);
+	dma->resr[resi].l = htole32(4 | masks);
+
+	for (r = 10000; r >= 0; r--) {
+		DELAY(10);
+		if ((dma->resr[resi].l & htole32(HIFN_D_VALID)) == 0)
+			break;
+	}
+	if (r == 0) {
+		device_printf(sc->sc_dev, "writeramaddr -- "
+		    "result[%d](addr %d) still valid\n", resi, addr);
+		r = -1;
+		return (-1);
+	} else
+		r = 0;
+
+	WRITE_REG_1(sc, HIFN_1_DMA_CSR,
+	    HIFN_DMACSR_C_CTRL_DIS | HIFN_DMACSR_S_CTRL_DIS |
+	    HIFN_DMACSR_D_CTRL_DIS | HIFN_DMACSR_R_CTRL_DIS);
+
+	return (r);
+}
+
+static int
+hifn_readramaddr(struct hifn_softc *sc, int addr, u_int8_t *data)
+{
+	struct hifn_dma *dma = sc->sc_dma;
+	hifn_base_command_t rc;
+	const u_int32_t masks = HIFN_D_VALID | HIFN_D_LAST | HIFN_D_MASKDONEIRQ;
+	int r, cmdi, srci, dsti, resi;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	rc.masks = htole16(2 << 13);
+	rc.session_num = htole16(addr >> 14);
+	rc.total_source_count = htole16(addr & 0x3fff);
+	rc.total_dest_count = htole16(8);
+
+	hifn_alloc_slot(sc, &cmdi, &srci, &dsti, &resi);
+
+	WRITE_REG_1(sc, HIFN_1_DMA_CSR,
+	    HIFN_DMACSR_C_CTRL_ENA | HIFN_DMACSR_S_CTRL_ENA |
+	    HIFN_DMACSR_D_CTRL_ENA | HIFN_DMACSR_R_CTRL_ENA);
+
+	bzero(dma->command_bufs[cmdi], HIFN_MAX_COMMAND);
+	*(hifn_base_command_t *)dma->command_bufs[cmdi] = rc;
+
+	dma->srcr[srci].p = htole32(sc->sc_dma_physaddr +
+	    offsetof(struct hifn_dma, test_src));
+	dma->test_src = 0;
+	dma->dstr[dsti].p =  htole32(sc->sc_dma_physaddr +
+	    offsetof(struct hifn_dma, test_dst));
+	dma->test_dst = 0;
+	dma->cmdr[cmdi].l = htole32(8 | masks);
+	dma->srcr[srci].l = htole32(8 | masks);
+	dma->dstr[dsti].l = htole32(8 | masks);
+	dma->resr[resi].l = htole32(HIFN_MAX_RESULT | masks);
+
+	for (r = 10000; r >= 0; r--) {
+		DELAY(10);
+		if ((dma->resr[resi].l & htole32(HIFN_D_VALID)) == 0)
+			break;
+	}
+	if (r == 0) {
+		device_printf(sc->sc_dev, "readramaddr -- "
+		    "result[%d](addr %d) still valid\n", resi, addr);
+		r = -1;
+	} else {
+		r = 0;
+		bcopy(&dma->test_dst, data, sizeof(dma->test_dst));
+	}
+
+	WRITE_REG_1(sc, HIFN_1_DMA_CSR,
+	    HIFN_DMACSR_C_CTRL_DIS | HIFN_DMACSR_S_CTRL_DIS |
+	    HIFN_DMACSR_D_CTRL_DIS | HIFN_DMACSR_R_CTRL_DIS);
+
+	return (r);
+}
+
+/*
+ * Initialize the descriptor rings.
+ */
+static void 
+hifn_init_dma(struct hifn_softc *sc)
+{
+	struct hifn_dma *dma = sc->sc_dma;
+	int i;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	hifn_set_retry(sc);
+
+	/* initialize static pointer values */
+	for (i = 0; i < HIFN_D_CMD_RSIZE; i++)
+		dma->cmdr[i].p = htole32(sc->sc_dma_physaddr +
+		    offsetof(struct hifn_dma, command_bufs[i][0]));
+	for (i = 0; i < HIFN_D_RES_RSIZE; i++)
+		dma->resr[i].p = htole32(sc->sc_dma_physaddr +
+		    offsetof(struct hifn_dma, result_bufs[i][0]));
+
+	dma->cmdr[HIFN_D_CMD_RSIZE].p =
+	    htole32(sc->sc_dma_physaddr + offsetof(struct hifn_dma, cmdr[0]));
+	dma->srcr[HIFN_D_SRC_RSIZE].p =
+	    htole32(sc->sc_dma_physaddr + offsetof(struct hifn_dma, srcr[0]));
+	dma->dstr[HIFN_D_DST_RSIZE].p =
+	    htole32(sc->sc_dma_physaddr + offsetof(struct hifn_dma, dstr[0]));
+	dma->resr[HIFN_D_RES_RSIZE].p =
+	    htole32(sc->sc_dma_physaddr + offsetof(struct hifn_dma, resr[0]));
+
+	dma->cmdu = dma->srcu = dma->dstu = dma->resu = 0;
+	dma->cmdi = dma->srci = dma->dsti = dma->resi = 0;
+	dma->cmdk = dma->srck = dma->dstk = dma->resk = 0;
+}
+
+/*
+ * Writes out the raw command buffer space.  Returns the
+ * command buffer size.
+ */
+static u_int
+hifn_write_command(struct hifn_command *cmd, u_int8_t *buf)
+{
+	struct hifn_softc *sc = NULL;
+	u_int8_t *buf_pos;
+	hifn_base_command_t *base_cmd;
+	hifn_mac_command_t *mac_cmd;
+	hifn_crypt_command_t *cry_cmd;
+	int using_mac, using_crypt, len, ivlen;
+	u_int32_t dlen, slen;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	buf_pos = buf;
+	using_mac = cmd->base_masks & HIFN_BASE_CMD_MAC;
+	using_crypt = cmd->base_masks & HIFN_BASE_CMD_CRYPT;
+
+	base_cmd = (hifn_base_command_t *)buf_pos;
+	base_cmd->masks = htole16(cmd->base_masks);
+	slen = cmd->src_mapsize;
+	if (cmd->sloplen)
+		dlen = cmd->dst_mapsize - cmd->sloplen + sizeof(u_int32_t);
+	else
+		dlen = cmd->dst_mapsize;
+	base_cmd->total_source_count = htole16(slen & HIFN_BASE_CMD_LENMASK_LO);
+	base_cmd->total_dest_count = htole16(dlen & HIFN_BASE_CMD_LENMASK_LO);
+	dlen >>= 16;
+	slen >>= 16;
+	base_cmd->session_num = htole16(
+	    ((slen << HIFN_BASE_CMD_SRCLEN_S) & HIFN_BASE_CMD_SRCLEN_M) |
+	    ((dlen << HIFN_BASE_CMD_DSTLEN_S) & HIFN_BASE_CMD_DSTLEN_M));
+	buf_pos += sizeof(hifn_base_command_t);
+
+	if (using_mac) {
+		mac_cmd = (hifn_mac_command_t *)buf_pos;
+		dlen = cmd->maccrd->crd_len;
+		mac_cmd->source_count = htole16(dlen & 0xffff);
+		dlen >>= 16;
+		mac_cmd->masks = htole16(cmd->mac_masks |
+		    ((dlen << HIFN_MAC_CMD_SRCLEN_S) & HIFN_MAC_CMD_SRCLEN_M));
+		mac_cmd->header_skip = htole16(cmd->maccrd->crd_skip);
+		mac_cmd->reserved = 0;
+		buf_pos += sizeof(hifn_mac_command_t);
+	}
+
+	if (using_crypt) {
+		cry_cmd = (hifn_crypt_command_t *)buf_pos;
+		dlen = cmd->enccrd->crd_len;
+		cry_cmd->source_count = htole16(dlen & 0xffff);
+		dlen >>= 16;
+		cry_cmd->masks = htole16(cmd->cry_masks |
+		    ((dlen << HIFN_CRYPT_CMD_SRCLEN_S) & HIFN_CRYPT_CMD_SRCLEN_M));
+		cry_cmd->header_skip = htole16(cmd->enccrd->crd_skip);
+		cry_cmd->reserved = 0;
+		buf_pos += sizeof(hifn_crypt_command_t);
+	}
+
+	if (using_mac && cmd->mac_masks & HIFN_MAC_CMD_NEW_KEY) {
+		bcopy(cmd->mac, buf_pos, HIFN_MAC_KEY_LENGTH);
+		buf_pos += HIFN_MAC_KEY_LENGTH;
+	}
+
+	if (using_crypt && cmd->cry_masks & HIFN_CRYPT_CMD_NEW_KEY) {
+		switch (cmd->cry_masks & HIFN_CRYPT_CMD_ALG_MASK) {
+		case HIFN_CRYPT_CMD_ALG_3DES:
+			bcopy(cmd->ck, buf_pos, HIFN_3DES_KEY_LENGTH);
+			buf_pos += HIFN_3DES_KEY_LENGTH;
+			break;
+		case HIFN_CRYPT_CMD_ALG_DES:
+			bcopy(cmd->ck, buf_pos, HIFN_DES_KEY_LENGTH);
+			buf_pos += HIFN_DES_KEY_LENGTH;
+			break;
+		case HIFN_CRYPT_CMD_ALG_RC4:
+			len = 256;
+			do {
+				int clen;
+
+				clen = MIN(cmd->cklen, len);
+				bcopy(cmd->ck, buf_pos, clen);
+				len -= clen;
+				buf_pos += clen;
+			} while (len > 0);
+			bzero(buf_pos, 4);
+			buf_pos += 4;
+			break;
+		case HIFN_CRYPT_CMD_ALG_AES:
+			/*
+			 * AES keys are variable 128, 192 and
+			 * 256 bits (16, 24 and 32 bytes).
+			 */
+			bcopy(cmd->ck, buf_pos, cmd->cklen);
+			buf_pos += cmd->cklen;
+			break;
+		}
+	}
+
+	if (using_crypt && cmd->cry_masks & HIFN_CRYPT_CMD_NEW_IV) {
+		switch (cmd->cry_masks & HIFN_CRYPT_CMD_ALG_MASK) {
+		case HIFN_CRYPT_CMD_ALG_AES:
+			ivlen = HIFN_AES_IV_LENGTH;
+			break;
+		default:
+			ivlen = HIFN_IV_LENGTH;
+			break;
+		}
+		bcopy(cmd->iv, buf_pos, ivlen);
+		buf_pos += ivlen;
+	}
+
+	if ((cmd->base_masks & (HIFN_BASE_CMD_MAC|HIFN_BASE_CMD_CRYPT)) == 0) {
+		bzero(buf_pos, 8);
+		buf_pos += 8;
+	}
+
+	return (buf_pos - buf);
+}
+
+static int
+hifn_dmamap_aligned(struct hifn_operand *op)
+{
+	struct hifn_softc *sc = NULL;
+	int i;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	for (i = 0; i < op->nsegs; i++) {
+		if (op->segs[i].ds_addr & 3)
+			return (0);
+		if ((i != (op->nsegs - 1)) && (op->segs[i].ds_len & 3))
+			return (0);
+	}
+	return (1);
+}
+
+static __inline int
+hifn_dmamap_dstwrap(struct hifn_softc *sc, int idx)
+{
+	struct hifn_dma *dma = sc->sc_dma;
+
+	if (++idx == HIFN_D_DST_RSIZE) {
+		dma->dstr[idx].l = htole32(HIFN_D_VALID | HIFN_D_JUMP |
+		    HIFN_D_MASKDONEIRQ);
+		HIFN_DSTR_SYNC(sc, idx,
+		    BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
+		idx = 0;
+	}
+	return (idx);
+}
+
+static int
+hifn_dmamap_load_dst(struct hifn_softc *sc, struct hifn_command *cmd)
+{
+	struct hifn_dma *dma = sc->sc_dma;
+	struct hifn_operand *dst = &cmd->dst;
+	u_int32_t p, l;
+	int idx, used = 0, i;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	idx = dma->dsti;
+	for (i = 0; i < dst->nsegs - 1; i++) {
+		dma->dstr[idx].p = htole32(dst->segs[i].ds_addr);
+		dma->dstr[idx].l = htole32(HIFN_D_MASKDONEIRQ | dst->segs[i].ds_len);
+		wmb();
+		dma->dstr[idx].l |= htole32(HIFN_D_VALID);
+		HIFN_DSTR_SYNC(sc, idx,
+		    BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
+		used++;
+
+		idx = hifn_dmamap_dstwrap(sc, idx);
+	}
+
+	if (cmd->sloplen == 0) {
+		p = dst->segs[i].ds_addr;
+		l = HIFN_D_MASKDONEIRQ | HIFN_D_LAST |
+		    dst->segs[i].ds_len;
+	} else {
+		p = sc->sc_dma_physaddr +
+		    offsetof(struct hifn_dma, slop[cmd->slopidx]);
+		l = HIFN_D_MASKDONEIRQ | HIFN_D_LAST |
+		    sizeof(u_int32_t);
+
+		if ((dst->segs[i].ds_len - cmd->sloplen) != 0) {
+			dma->dstr[idx].p = htole32(dst->segs[i].ds_addr);
+			dma->dstr[idx].l = htole32(HIFN_D_MASKDONEIRQ |
+			    (dst->segs[i].ds_len - cmd->sloplen));
+			wmb();
+			dma->dstr[idx].l |= htole32(HIFN_D_VALID);
+			HIFN_DSTR_SYNC(sc, idx,
+			    BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
+			used++;
+
+			idx = hifn_dmamap_dstwrap(sc, idx);
+		}
+	}
+	dma->dstr[idx].p = htole32(p);
+	dma->dstr[idx].l = htole32(l);
+	wmb();
+	dma->dstr[idx].l |= htole32(HIFN_D_VALID);
+	HIFN_DSTR_SYNC(sc, idx, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
+	used++;
+
+	idx = hifn_dmamap_dstwrap(sc, idx);
+
+	dma->dsti = idx;
+	dma->dstu += used;
+	return (idx);
+}
+
+static __inline int
+hifn_dmamap_srcwrap(struct hifn_softc *sc, int idx)
+{
+	struct hifn_dma *dma = sc->sc_dma;
+
+	if (++idx == HIFN_D_SRC_RSIZE) {
+		dma->srcr[idx].l = htole32(HIFN_D_VALID |
+		    HIFN_D_JUMP | HIFN_D_MASKDONEIRQ);
+		HIFN_SRCR_SYNC(sc, HIFN_D_SRC_RSIZE,
+		    BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
+		idx = 0;
+	}
+	return (idx);
+}
+
+static int
+hifn_dmamap_load_src(struct hifn_softc *sc, struct hifn_command *cmd)
+{
+	struct hifn_dma *dma = sc->sc_dma;
+	struct hifn_operand *src = &cmd->src;
+	int idx, i;
+	u_int32_t last = 0;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	idx = dma->srci;
+	for (i = 0; i < src->nsegs; i++) {
+		if (i == src->nsegs - 1)
+			last = HIFN_D_LAST;
+
+		dma->srcr[idx].p = htole32(src->segs[i].ds_addr);
+		dma->srcr[idx].l = htole32(src->segs[i].ds_len |
+		    HIFN_D_MASKDONEIRQ | last);
+		wmb();
+		dma->srcr[idx].l |= htole32(HIFN_D_VALID);
+		HIFN_SRCR_SYNC(sc, idx,
+		    BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
+
+		idx = hifn_dmamap_srcwrap(sc, idx);
+	}
+	dma->srci = idx;
+	dma->srcu += src->nsegs;
+	return (idx);
+} 
+
+
+static int 
+hifn_crypto(
+	struct hifn_softc *sc,
+	struct hifn_command *cmd,
+	struct cryptop *crp,
+	int hint)
+{
+	struct	hifn_dma *dma = sc->sc_dma;
+	u_int32_t cmdlen, csr;
+	int cmdi, resi, err = 0;
+	unsigned long l_flags;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	/*
+	 * need 1 cmd, and 1 res
+	 *
+	 * NB: check this first since it's easy.
+	 */
+	HIFN_LOCK(sc);
+	if ((dma->cmdu + 1) > HIFN_D_CMD_RSIZE ||
+	    (dma->resu + 1) > HIFN_D_RES_RSIZE) {
+#ifdef HIFN_DEBUG
+		if (hifn_debug) {
+			device_printf(sc->sc_dev,
+				"cmd/result exhaustion, cmdu %u resu %u\n",
+				dma->cmdu, dma->resu);
+		}
+#endif
+		hifnstats.hst_nomem_cr++;
+		sc->sc_needwakeup |= CRYPTO_SYMQ;
+		HIFN_UNLOCK(sc);
+		return (ERESTART);
+	}
+
+	if (crp->crp_flags & CRYPTO_F_SKBUF) {
+		if (pci_map_skb(sc, &cmd->src, cmd->src_skb)) {
+			hifnstats.hst_nomem_load++;
+			err = ENOMEM;
+			goto err_srcmap1;
+		}
+	} else if (crp->crp_flags & CRYPTO_F_IOV) {
+		if (pci_map_uio(sc, &cmd->src, cmd->src_io)) {
+			hifnstats.hst_nomem_load++;
+			err = ENOMEM;
+			goto err_srcmap1;
+		}
+	} else {
+		if (pci_map_buf(sc, &cmd->src, cmd->src_buf, crp->crp_ilen)) {
+			hifnstats.hst_nomem_load++;
+			err = ENOMEM;
+			goto err_srcmap1;
+		}
+	}
+
+	if (hifn_dmamap_aligned(&cmd->src)) {
+		cmd->sloplen = cmd->src_mapsize & 3;
+		cmd->dst = cmd->src;
+	} else {
+		if (crp->crp_flags & CRYPTO_F_IOV) {
+			DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__);
+			err = EINVAL;
+			goto err_srcmap;
+		} else if (crp->crp_flags & CRYPTO_F_SKBUF) {
+#ifdef NOTYET
+			int totlen, len;
+			struct mbuf *m, *m0, *mlast;
+
+			KASSERT(cmd->dst_m == cmd->src_m,
+				("hifn_crypto: dst_m initialized improperly"));
+			hifnstats.hst_unaligned++;
+			/*
+			 * Source is not aligned on a longword boundary.
+			 * Copy the data to insure alignment.  If we fail
+			 * to allocate mbufs or clusters while doing this
+			 * we return ERESTART so the operation is requeued
+			 * at the crypto later, but only if there are
+			 * ops already posted to the hardware; otherwise we
+			 * have no guarantee that we'll be re-entered.
+			 */
+			totlen = cmd->src_mapsize;
+			if (cmd->src_m->m_flags & M_PKTHDR) {
+				len = MHLEN;
+				MGETHDR(m0, M_DONTWAIT, MT_DATA);
+				if (m0 && !m_dup_pkthdr(m0, cmd->src_m, M_DONTWAIT)) {
+					m_free(m0);
+					m0 = NULL;
+				}
+			} else {
+				len = MLEN;
+				MGET(m0, M_DONTWAIT, MT_DATA);
+			}
+			if (m0 == NULL) {
+				hifnstats.hst_nomem_mbuf++;
+				err = dma->cmdu ? ERESTART : ENOMEM;
+				goto err_srcmap;
+			}
+			if (totlen >= MINCLSIZE) {
+				MCLGET(m0, M_DONTWAIT);
+				if ((m0->m_flags & M_EXT) == 0) {
+					hifnstats.hst_nomem_mcl++;
+					err = dma->cmdu ? ERESTART : ENOMEM;
+					m_freem(m0);
+					goto err_srcmap;
+				}
+				len = MCLBYTES;
+			}
+			totlen -= len;
+			m0->m_pkthdr.len = m0->m_len = len;
+			mlast = m0;
+
+			while (totlen > 0) {
+				MGET(m, M_DONTWAIT, MT_DATA);
+				if (m == NULL) {
+					hifnstats.hst_nomem_mbuf++;
+					err = dma->cmdu ? ERESTART : ENOMEM;
+					m_freem(m0);
+					goto err_srcmap;
+				}
+				len = MLEN;
+				if (totlen >= MINCLSIZE) {
+					MCLGET(m, M_DONTWAIT);
+					if ((m->m_flags & M_EXT) == 0) {
+						hifnstats.hst_nomem_mcl++;
+						err = dma->cmdu ? ERESTART : ENOMEM;
+						mlast->m_next = m;
+						m_freem(m0);
+						goto err_srcmap;
+					}
+					len = MCLBYTES;
+				}
+
+				m->m_len = len;
+				m0->m_pkthdr.len += len;
+				totlen -= len;
+
+				mlast->m_next = m;
+				mlast = m;
+			}
+			cmd->dst_m = m0;
+#else
+			device_printf(sc->sc_dev,
+					"%s,%d: CRYPTO_F_SKBUF unaligned not implemented\n",
+					__FILE__, __LINE__);
+			err = EINVAL;
+			goto err_srcmap;
+#endif
+		} else {
+			device_printf(sc->sc_dev,
+					"%s,%d: unaligned contig buffers not implemented\n",
+					__FILE__, __LINE__);
+			err = EINVAL;
+			goto err_srcmap;
+		}
+	}
+
+	if (cmd->dst_map == NULL) {
+		if (crp->crp_flags & CRYPTO_F_SKBUF) {
+			if (pci_map_skb(sc, &cmd->dst, cmd->dst_skb)) {
+				hifnstats.hst_nomem_map++;
+				err = ENOMEM;
+				goto err_dstmap1;
+			}
+		} else if (crp->crp_flags & CRYPTO_F_IOV) {
+			if (pci_map_uio(sc, &cmd->dst, cmd->dst_io)) {
+				hifnstats.hst_nomem_load++;
+				err = ENOMEM;
+				goto err_dstmap1;
+			}
+		} else {
+			if (pci_map_buf(sc, &cmd->dst, cmd->dst_buf, crp->crp_ilen)) {
+				hifnstats.hst_nomem_load++;
+				err = ENOMEM;
+				goto err_dstmap1;
+			}
+		}
+	}
+
+#ifdef HIFN_DEBUG
+	if (hifn_debug) {
+		device_printf(sc->sc_dev,
+		    "Entering cmd: stat %8x ien %8x u %d/%d/%d/%d n %d/%d\n",
+		    READ_REG_1(sc, HIFN_1_DMA_CSR),
+		    READ_REG_1(sc, HIFN_1_DMA_IER),
+		    dma->cmdu, dma->srcu, dma->dstu, dma->resu,
+		    cmd->src_nsegs, cmd->dst_nsegs);
+	}
+#endif
+
+#if 0
+	if (cmd->src_map == cmd->dst_map) {
+		bus_dmamap_sync(sc->sc_dmat, cmd->src_map,
+		    BUS_DMASYNC_PREWRITE|BUS_DMASYNC_PREREAD);
+	} else {
+		bus_dmamap_sync(sc->sc_dmat, cmd->src_map,
+		    BUS_DMASYNC_PREWRITE);
+		bus_dmamap_sync(sc->sc_dmat, cmd->dst_map,
+		    BUS_DMASYNC_PREREAD);
+	}
+#endif
+
+	/*
+	 * need N src, and N dst
+	 */
+	if ((dma->srcu + cmd->src_nsegs) > HIFN_D_SRC_RSIZE ||
+	    (dma->dstu + cmd->dst_nsegs + 1) > HIFN_D_DST_RSIZE) {
+#ifdef HIFN_DEBUG
+		if (hifn_debug) {
+			device_printf(sc->sc_dev,
+				"src/dst exhaustion, srcu %u+%u dstu %u+%u\n",
+				dma->srcu, cmd->src_nsegs,
+				dma->dstu, cmd->dst_nsegs);
+		}
+#endif
+		hifnstats.hst_nomem_sd++;
+		err = ERESTART;
+		goto err_dstmap;
+	}
+
+	if (dma->cmdi == HIFN_D_CMD_RSIZE) {
+		dma->cmdi = 0;
+		dma->cmdr[HIFN_D_CMD_RSIZE].l = htole32(HIFN_D_JUMP|HIFN_D_MASKDONEIRQ);
+		wmb();
+		dma->cmdr[HIFN_D_CMD_RSIZE].l |= htole32(HIFN_D_VALID);
+		HIFN_CMDR_SYNC(sc, HIFN_D_CMD_RSIZE,
+		    BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
+	}
+	cmdi = dma->cmdi++;
+	cmdlen = hifn_write_command(cmd, dma->command_bufs[cmdi]);
+	HIFN_CMD_SYNC(sc, cmdi, BUS_DMASYNC_PREWRITE);
+
+	/* .p for command/result already set */
+	dma->cmdr[cmdi].l = htole32(cmdlen | HIFN_D_LAST |
+	    HIFN_D_MASKDONEIRQ);
+	wmb();
+	dma->cmdr[cmdi].l |= htole32(HIFN_D_VALID);
+	HIFN_CMDR_SYNC(sc, cmdi,
+	    BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);
+	dma->cmdu++;
+
+	/*
+	 * We don't worry about missing an interrupt (which a "command wait"
+	 * interrupt salvages us from), unless there is more than one command
+	 * in the queue.
+	 */
+	if (dma->cmdu > 1) {
+		sc->sc_dmaier |= HIFN_DMAIER_C_WAIT;
+		WRITE_REG_1(sc, HIFN_1_DMA_IER, sc->sc_dmaier);
+	}
+
+	hifnstats.hst_ipackets++;
+	hifnstats.hst_ibytes += cmd->src_mapsize;
+
+	hifn_dmamap_load_src(sc, cmd);
+
+	/*
+	 * Unlike other descriptors, we don't mask done interrupt from
+	 * result descriptor.
+	 */
+#ifdef HIFN_DEBUG
+	if (hifn_debug)
+		device_printf(sc->sc_dev, "load res\n");
+#endif
+	if (dma->resi == HIFN_D_RES_RSIZE) {
+		dma->resi = 0;
+		dma->resr[HIFN_D_RES_RSIZE].l = htole32(HIFN_D_JUMP|HIFN_D_MASKDONEIRQ);
+		wmb();
+		dma->resr[HIFN_D_RES_RSIZE].l |= htole32(HIFN_D_VALID);
+		HIFN_RESR_SYNC(sc, HIFN_D_RES_RSIZE,
+		    BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
+	}
+	resi = dma->resi++;
+	KASSERT(dma->hifn_commands[resi] == NULL,
+		("hifn_crypto: command slot %u busy", resi));
+	dma->hifn_commands[resi] = cmd;
+	HIFN_RES_SYNC(sc, resi, BUS_DMASYNC_PREREAD);
+	if ((hint & CRYPTO_HINT_MORE) && sc->sc_curbatch < hifn_maxbatch) {
+		dma->resr[resi].l = htole32(HIFN_MAX_RESULT |
+		    HIFN_D_LAST | HIFN_D_MASKDONEIRQ);
+		wmb();
+		dma->resr[resi].l |= htole32(HIFN_D_VALID);
+		sc->sc_curbatch++;
+		if (sc->sc_curbatch > hifnstats.hst_maxbatch)
+			hifnstats.hst_maxbatch = sc->sc_curbatch;
+		hifnstats.hst_totbatch++;
+	} else {
+		dma->resr[resi].l = htole32(HIFN_MAX_RESULT | HIFN_D_LAST);
+		wmb();
+		dma->resr[resi].l |= htole32(HIFN_D_VALID);
+		sc->sc_curbatch = 0;
+	}
+	HIFN_RESR_SYNC(sc, resi,
+	    BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
+	dma->resu++;
+
+	if (cmd->sloplen)
+		cmd->slopidx = resi;
+
+	hifn_dmamap_load_dst(sc, cmd);
+
+	csr = 0;
+	if (sc->sc_c_busy == 0) {
+		csr |= HIFN_DMACSR_C_CTRL_ENA;
+		sc->sc_c_busy = 1;
+	}
+	if (sc->sc_s_busy == 0) {
+		csr |= HIFN_DMACSR_S_CTRL_ENA;
+		sc->sc_s_busy = 1;
+	}
+	if (sc->sc_r_busy == 0) {
+		csr |= HIFN_DMACSR_R_CTRL_ENA;
+		sc->sc_r_busy = 1;
+	}
+	if (sc->sc_d_busy == 0) {
+		csr |= HIFN_DMACSR_D_CTRL_ENA;
+		sc->sc_d_busy = 1;
+	}
+	if (csr)
+		WRITE_REG_1(sc, HIFN_1_DMA_CSR, csr);
+
+#ifdef HIFN_DEBUG
+	if (hifn_debug) {
+		device_printf(sc->sc_dev, "command: stat %8x ier %8x\n",
+		    READ_REG_1(sc, HIFN_1_DMA_CSR),
+		    READ_REG_1(sc, HIFN_1_DMA_IER));
+	}
+#endif
+
+	sc->sc_active = 5;
+	HIFN_UNLOCK(sc);
+	KASSERT(err == 0, ("hifn_crypto: success with error %u", err));
+	return (err);		/* success */
+
+err_dstmap:
+	if (cmd->src_map != cmd->dst_map)
+		pci_unmap_buf(sc, &cmd->dst);
+err_dstmap1:
+err_srcmap:
+	if (crp->crp_flags & CRYPTO_F_SKBUF) {
+		if (cmd->src_skb != cmd->dst_skb)
+#ifdef NOTYET
+			m_freem(cmd->dst_m);
+#else
+			device_printf(sc->sc_dev,
+					"%s,%d: CRYPTO_F_SKBUF src != dst not implemented\n",
+					__FILE__, __LINE__);
+#endif
+	}
+	pci_unmap_buf(sc, &cmd->src);
+err_srcmap1:
+	HIFN_UNLOCK(sc);
+	return (err);
+}
+
+static void
+hifn_tick(unsigned long arg)
+{
+	struct hifn_softc *sc;
+	unsigned long l_flags;
+
+	if (arg >= HIFN_MAX_CHIPS)
+		return;
+	sc = hifn_chip_idx[arg];
+	if (!sc)
+		return;
+
+	HIFN_LOCK(sc);
+	if (sc->sc_active == 0) {
+		struct hifn_dma *dma = sc->sc_dma;
+		u_int32_t r = 0;
+
+		if (dma->cmdu == 0 && sc->sc_c_busy) {
+			sc->sc_c_busy = 0;
+			r |= HIFN_DMACSR_C_CTRL_DIS;
+		}
+		if (dma->srcu == 0 && sc->sc_s_busy) {
+			sc->sc_s_busy = 0;
+			r |= HIFN_DMACSR_S_CTRL_DIS;
+		}
+		if (dma->dstu == 0 && sc->sc_d_busy) {
+			sc->sc_d_busy = 0;
+			r |= HIFN_DMACSR_D_CTRL_DIS;
+		}
+		if (dma->resu == 0 && sc->sc_r_busy) {
+			sc->sc_r_busy = 0;
+			r |= HIFN_DMACSR_R_CTRL_DIS;
+		}
+		if (r)
+			WRITE_REG_1(sc, HIFN_1_DMA_CSR, r);
+	} else
+		sc->sc_active--;
+	HIFN_UNLOCK(sc);
+	mod_timer(&sc->sc_tickto, jiffies + HZ);
+}
+
+static irqreturn_t
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19)
+hifn_intr(int irq, void *arg)
+#else
+hifn_intr(int irq, void *arg, struct pt_regs *regs)
+#endif
+{
+	struct hifn_softc *sc = arg;
+	struct hifn_dma *dma;
+	u_int32_t dmacsr, restart;
+	int i, u;
+	unsigned long l_flags;
+
+	dmacsr = READ_REG_1(sc, HIFN_1_DMA_CSR);
+
+	/* Nothing in the DMA unit interrupted */
+	if ((dmacsr & sc->sc_dmaier) == 0)
+		return IRQ_NONE;
+
+	HIFN_LOCK(sc);
+
+	dma = sc->sc_dma;
+
+#ifdef HIFN_DEBUG
+	if (hifn_debug) {
+		device_printf(sc->sc_dev,
+		    "irq: stat %08x ien %08x damier %08x i %d/%d/%d/%d k %d/%d/%d/%d u %d/%d/%d/%d\n",
+		    dmacsr, READ_REG_1(sc, HIFN_1_DMA_IER), sc->sc_dmaier,
+		    dma->cmdi, dma->srci, dma->dsti, dma->resi,
+		    dma->cmdk, dma->srck, dma->dstk, dma->resk,
+		    dma->cmdu, dma->srcu, dma->dstu, dma->resu);
+	}
+#endif
+
+	WRITE_REG_1(sc, HIFN_1_DMA_CSR, dmacsr & sc->sc_dmaier);
+
+	if ((sc->sc_flags & HIFN_HAS_PUBLIC) &&
+	    (dmacsr & HIFN_DMACSR_PUBDONE))
+		WRITE_REG_1(sc, HIFN_1_PUB_STATUS,
+		    READ_REG_1(sc, HIFN_1_PUB_STATUS) | HIFN_PUBSTS_DONE);
+
+	restart = dmacsr & (HIFN_DMACSR_D_OVER | HIFN_DMACSR_R_OVER);
+	if (restart)
+		device_printf(sc->sc_dev, "overrun %x\n", dmacsr);
+
+	if (sc->sc_flags & HIFN_IS_7811) {
+		if (dmacsr & HIFN_DMACSR_ILLR)
+			device_printf(sc->sc_dev, "illegal read\n");
+		if (dmacsr & HIFN_DMACSR_ILLW)
+			device_printf(sc->sc_dev, "illegal write\n");
+	}
+
+	restart = dmacsr & (HIFN_DMACSR_C_ABORT | HIFN_DMACSR_S_ABORT |
+	    HIFN_DMACSR_D_ABORT | HIFN_DMACSR_R_ABORT);
+	if (restart) {
+		device_printf(sc->sc_dev, "abort, resetting.\n");
+		hifnstats.hst_abort++;
+		hifn_abort(sc);
+		HIFN_UNLOCK(sc);
+		return IRQ_HANDLED;
+	}
+
+	if ((dmacsr & HIFN_DMACSR_C_WAIT) && (dma->cmdu == 0)) {
+		/*
+		 * If no slots to process and we receive a "waiting on
+		 * command" interrupt, we disable the "waiting on command"
+		 * (by clearing it).
+		 */
+		sc->sc_dmaier &= ~HIFN_DMAIER_C_WAIT;
+		WRITE_REG_1(sc, HIFN_1_DMA_IER, sc->sc_dmaier);
+	}
+
+	/* clear the rings */
+	i = dma->resk; u = dma->resu;
+	while (u != 0) {
+		HIFN_RESR_SYNC(sc, i,
+		    BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
+		if (dma->resr[i].l & htole32(HIFN_D_VALID)) {
+			HIFN_RESR_SYNC(sc, i,
+			    BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
+			break;
+		}
+
+		if (i != HIFN_D_RES_RSIZE) {
+			struct hifn_command *cmd;
+			u_int8_t *macbuf = NULL;
+
+			HIFN_RES_SYNC(sc, i, BUS_DMASYNC_POSTREAD);
+			cmd = dma->hifn_commands[i];
+			KASSERT(cmd != NULL,
+				("hifn_intr: null command slot %u", i));
+			dma->hifn_commands[i] = NULL;
+
+			if (cmd->base_masks & HIFN_BASE_CMD_MAC) {
+				macbuf = dma->result_bufs[i];
+				macbuf += 12;
+			}
+
+			hifn_callback(sc, cmd, macbuf);
+			hifnstats.hst_opackets++;
+			u--;
+		}
+
+		if (++i == (HIFN_D_RES_RSIZE + 1))
+			i = 0;
+	}
+	dma->resk = i; dma->resu = u;
+
+	i = dma->srck; u = dma->srcu;
+	while (u != 0) {
+		if (i == HIFN_D_SRC_RSIZE)
+			i = 0;
+		HIFN_SRCR_SYNC(sc, i,
+		    BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
+		if (dma->srcr[i].l & htole32(HIFN_D_VALID)) {
+			HIFN_SRCR_SYNC(sc, i,
+			    BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
+			break;
+		}
+		i++, u--;
+	}
+	dma->srck = i; dma->srcu = u;
+
+	i = dma->cmdk; u = dma->cmdu;
+	while (u != 0) {
+		HIFN_CMDR_SYNC(sc, i,
+		    BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
+		if (dma->cmdr[i].l & htole32(HIFN_D_VALID)) {
+			HIFN_CMDR_SYNC(sc, i,
+			    BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
+			break;
+		}
+		if (i != HIFN_D_CMD_RSIZE) {
+			u--;
+			HIFN_CMD_SYNC(sc, i, BUS_DMASYNC_POSTWRITE);
+		}
+		if (++i == (HIFN_D_CMD_RSIZE + 1))
+			i = 0;
+	}
+	dma->cmdk = i; dma->cmdu = u;
+
+	HIFN_UNLOCK(sc);
+
+	if (sc->sc_needwakeup) {		/* XXX check high watermark */
+		int wakeup = sc->sc_needwakeup & (CRYPTO_SYMQ|CRYPTO_ASYMQ);
+#ifdef HIFN_DEBUG
+		if (hifn_debug)
+			device_printf(sc->sc_dev,
+				"wakeup crypto (%x) u %d/%d/%d/%d\n",
+				sc->sc_needwakeup,
+				dma->cmdu, dma->srcu, dma->dstu, dma->resu);
+#endif
+		sc->sc_needwakeup &= ~wakeup;
+		crypto_unblock(sc->sc_cid, wakeup);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Allocate a new 'session' and return an encoded session id.  'sidp'
+ * contains our registration id, and should contain an encoded session
+ * id on successful allocation.
+ */
+static int
+hifn_newsession(device_t dev, u_int32_t *sidp, struct cryptoini *cri)
+{
+	struct hifn_softc *sc = device_get_softc(dev);
+	struct cryptoini *c;
+	int mac = 0, cry = 0, sesn;
+	struct hifn_session *ses = NULL;
+	unsigned long l_flags;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	KASSERT(sc != NULL, ("hifn_newsession: null softc"));
+	if (sidp == NULL || cri == NULL || sc == NULL) {
+		DPRINTF("%s,%d: %s - EINVAL\n", __FILE__, __LINE__, __FUNCTION__);
+		return (EINVAL);
+	}
+
+	HIFN_LOCK(sc);
+	if (sc->sc_sessions == NULL) {
+		ses = sc->sc_sessions = (struct hifn_session *)kmalloc(sizeof(*ses),
+				SLAB_ATOMIC);
+		if (ses == NULL) {
+			HIFN_UNLOCK(sc);
+			return (ENOMEM);
+		}
+		sesn = 0;
+		sc->sc_nsessions = 1;
+	} else {
+		for (sesn = 0; sesn < sc->sc_nsessions; sesn++) {
+			if (!sc->sc_sessions[sesn].hs_used) {
+				ses = &sc->sc_sessions[sesn];
+				break;
+			}
+		}
+
+		if (ses == NULL) {
+			sesn = sc->sc_nsessions;
+			ses = (struct hifn_session *)kmalloc((sesn + 1) * sizeof(*ses),
+					SLAB_ATOMIC);
+			if (ses == NULL) {
+				HIFN_UNLOCK(sc);
+				return (ENOMEM);
+			}
+			bcopy(sc->sc_sessions, ses, sesn * sizeof(*ses));
+			bzero(sc->sc_sessions, sesn * sizeof(*ses));
+			kfree(sc->sc_sessions);
+			sc->sc_sessions = ses;
+			ses = &sc->sc_sessions[sesn];
+			sc->sc_nsessions++;
+		}
+	}
+	HIFN_UNLOCK(sc);
+
+	bzero(ses, sizeof(*ses));
+	ses->hs_used = 1;
+
+	for (c = cri; c != NULL; c = c->cri_next) {
+		switch (c->cri_alg) {
+		case CRYPTO_MD5:
+		case CRYPTO_SHA1:
+		case CRYPTO_MD5_HMAC:
+		case CRYPTO_SHA1_HMAC:
+			if (mac) {
+				DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__);
+				return (EINVAL);
+			}
+			mac = 1;
+			ses->hs_mlen = c->cri_mlen;
+			if (ses->hs_mlen == 0) {
+				switch (c->cri_alg) {
+				case CRYPTO_MD5:
+				case CRYPTO_MD5_HMAC:
+					ses->hs_mlen = 16;
+					break;
+				case CRYPTO_SHA1:
+				case CRYPTO_SHA1_HMAC:
+					ses->hs_mlen = 20;
+					break;
+				}
+			}
+			break;
+		case CRYPTO_DES_CBC:
+		case CRYPTO_3DES_CBC:
+		case CRYPTO_AES_CBC:
+			/* XXX this may read fewer, does it matter? */
+			read_random(ses->hs_iv,
+				c->cri_alg == CRYPTO_AES_CBC ?
+					HIFN_AES_IV_LENGTH : HIFN_IV_LENGTH);
+			/*FALLTHROUGH*/
+		case CRYPTO_ARC4:
+			if (cry) {
+				DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__);
+				return (EINVAL);
+			}
+			cry = 1;
+			break;
+		default:
+			DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__);
+			return (EINVAL);
+		}
+	}
+	if (mac == 0 && cry == 0) {
+		DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__);
+		return (EINVAL);
+	}
+
+	*sidp = HIFN_SID(device_get_unit(sc->sc_dev), sesn);
+
+	return (0);
+}
+
+/*
+ * Deallocate a session.
+ * XXX this routine should run a zero'd mac/encrypt key into context ram.
+ * XXX to blow away any keys already stored there.
+ */
+static int
+hifn_freesession(device_t dev, u_int64_t tid)
+{
+	struct hifn_softc *sc = device_get_softc(dev);
+	int session, error;
+	u_int32_t sid = CRYPTO_SESID2LID(tid);
+	unsigned long l_flags;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	KASSERT(sc != NULL, ("hifn_freesession: null softc"));
+	if (sc == NULL) {
+		DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__);
+		return (EINVAL);
+	}
+
+	HIFN_LOCK(sc);
+	session = HIFN_SESSION(sid);
+	if (session < sc->sc_nsessions) {
+		bzero(&sc->sc_sessions[session], sizeof(struct hifn_session));
+		error = 0;
+	} else {
+		DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__);
+		error = EINVAL;
+	}
+	HIFN_UNLOCK(sc);
+
+	return (error);
+}
+
+static int
+hifn_process(device_t dev, struct cryptop *crp, int hint)
+{
+	struct hifn_softc *sc = device_get_softc(dev);
+	struct hifn_command *cmd = NULL;
+	int session, err, ivlen;
+	struct cryptodesc *crd1, *crd2, *maccrd, *enccrd;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	if (crp == NULL || crp->crp_callback == NULL) {
+		hifnstats.hst_invalid++;
+		DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__);
+		return (EINVAL);
+	}
+	session = HIFN_SESSION(crp->crp_sid);
+
+	if (sc == NULL || session >= sc->sc_nsessions) {
+		DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__);
+		err = EINVAL;
+		goto errout;
+	}
+
+	cmd = kmalloc(sizeof(struct hifn_command), SLAB_ATOMIC);
+	if (cmd == NULL) {
+		hifnstats.hst_nomem++;
+		err = ENOMEM;
+		goto errout;
+	}
+	memset(cmd, 0, sizeof(*cmd));
+
+	if (crp->crp_flags & CRYPTO_F_SKBUF) {
+		cmd->src_skb = (struct sk_buff *)crp->crp_buf;
+		cmd->dst_skb = (struct sk_buff *)crp->crp_buf;
+	} else if (crp->crp_flags & CRYPTO_F_IOV) {
+		cmd->src_io = (struct uio *)crp->crp_buf;
+		cmd->dst_io = (struct uio *)crp->crp_buf;
+	} else {
+		cmd->src_buf = crp->crp_buf;
+		cmd->dst_buf = crp->crp_buf;
+	}
+
+	crd1 = crp->crp_desc;
+	if (crd1 == NULL) {
+		DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__);
+		err = EINVAL;
+		goto errout;
+	}
+	crd2 = crd1->crd_next;
+
+	if (crd2 == NULL) {
+		if (crd1->crd_alg == CRYPTO_MD5_HMAC ||
+		    crd1->crd_alg == CRYPTO_SHA1_HMAC ||
+		    crd1->crd_alg == CRYPTO_SHA1 ||
+		    crd1->crd_alg == CRYPTO_MD5) {
+			maccrd = crd1;
+			enccrd = NULL;
+		} else if (crd1->crd_alg == CRYPTO_DES_CBC ||
+		    crd1->crd_alg == CRYPTO_3DES_CBC ||
+		    crd1->crd_alg == CRYPTO_AES_CBC ||
+		    crd1->crd_alg == CRYPTO_ARC4) {
+			if ((crd1->crd_flags & CRD_F_ENCRYPT) == 0)
+				cmd->base_masks |= HIFN_BASE_CMD_DECODE;
+			maccrd = NULL;
+			enccrd = crd1;
+		} else {
+			DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__);
+			err = EINVAL;
+			goto errout;
+		}
+	} else {
+		if ((crd1->crd_alg == CRYPTO_MD5_HMAC ||
+                     crd1->crd_alg == CRYPTO_SHA1_HMAC ||
+                     crd1->crd_alg == CRYPTO_MD5 ||
+                     crd1->crd_alg == CRYPTO_SHA1) &&
+		    (crd2->crd_alg == CRYPTO_DES_CBC ||
+		     crd2->crd_alg == CRYPTO_3DES_CBC ||
+		     crd2->crd_alg == CRYPTO_AES_CBC ||
+		     crd2->crd_alg == CRYPTO_ARC4) &&
+		    ((crd2->crd_flags & CRD_F_ENCRYPT) == 0)) {
+			cmd->base_masks = HIFN_BASE_CMD_DECODE;
+			maccrd = crd1;
+			enccrd = crd2;
+		} else if ((crd1->crd_alg == CRYPTO_DES_CBC ||
+		     crd1->crd_alg == CRYPTO_ARC4 ||
+		     crd1->crd_alg == CRYPTO_3DES_CBC ||
+		     crd1->crd_alg == CRYPTO_AES_CBC) &&
+		    (crd2->crd_alg == CRYPTO_MD5_HMAC ||
+                     crd2->crd_alg == CRYPTO_SHA1_HMAC ||
+                     crd2->crd_alg == CRYPTO_MD5 ||
+                     crd2->crd_alg == CRYPTO_SHA1) &&
+		    (crd1->crd_flags & CRD_F_ENCRYPT)) {
+			enccrd = crd1;
+			maccrd = crd2;
+		} else {
+			/*
+			 * We cannot order the 7751 as requested
+			 */
+			DPRINTF("%s,%d: %s %d,%d,%d - EINVAL\n",__FILE__,__LINE__,__FUNCTION__, crd1->crd_alg, crd2->crd_alg, crd1->crd_flags & CRD_F_ENCRYPT);
+			err = EINVAL;
+			goto errout;
+		}
+	}
+
+	if (enccrd) {
+		cmd->enccrd = enccrd;
+		cmd->base_masks |= HIFN_BASE_CMD_CRYPT;
+		switch (enccrd->crd_alg) {
+		case CRYPTO_ARC4:
+			cmd->cry_masks |= HIFN_CRYPT_CMD_ALG_RC4;
+			break;
+		case CRYPTO_DES_CBC:
+			cmd->cry_masks |= HIFN_CRYPT_CMD_ALG_DES |
+			    HIFN_CRYPT_CMD_MODE_CBC |
+			    HIFN_CRYPT_CMD_NEW_IV;
+			break;
+		case CRYPTO_3DES_CBC:
+			cmd->cry_masks |= HIFN_CRYPT_CMD_ALG_3DES |
+			    HIFN_CRYPT_CMD_MODE_CBC |
+			    HIFN_CRYPT_CMD_NEW_IV;
+			break;
+		case CRYPTO_AES_CBC:
+			cmd->cry_masks |= HIFN_CRYPT_CMD_ALG_AES |
+			    HIFN_CRYPT_CMD_MODE_CBC |
+			    HIFN_CRYPT_CMD_NEW_IV;
+			break;
+		default:
+			DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__);
+			err = EINVAL;
+			goto errout;
+		}
+		if (enccrd->crd_alg != CRYPTO_ARC4) {
+			ivlen = ((enccrd->crd_alg == CRYPTO_AES_CBC) ?
+				HIFN_AES_IV_LENGTH : HIFN_IV_LENGTH);
+			if (enccrd->crd_flags & CRD_F_ENCRYPT) {
+				if (enccrd->crd_flags & CRD_F_IV_EXPLICIT)
+					bcopy(enccrd->crd_iv, cmd->iv, ivlen);
+				else
+					bcopy(sc->sc_sessions[session].hs_iv,
+					    cmd->iv, ivlen);
+
+				if ((enccrd->crd_flags & CRD_F_IV_PRESENT)
+				    == 0) {
+					crypto_copyback(crp->crp_flags,
+					    crp->crp_buf, enccrd->crd_inject,
+					    ivlen, cmd->iv);
+				}
+			} else {
+				if (enccrd->crd_flags & CRD_F_IV_EXPLICIT)
+					bcopy(enccrd->crd_iv, cmd->iv, ivlen);
+				else {
+					crypto_copydata(crp->crp_flags,
+					    crp->crp_buf, enccrd->crd_inject,
+					    ivlen, cmd->iv);
+				}
+			}
+		}
+
+		if (enccrd->crd_flags & CRD_F_KEY_EXPLICIT)
+			cmd->cry_masks |= HIFN_CRYPT_CMD_NEW_KEY;
+		cmd->ck = enccrd->crd_key;
+		cmd->cklen = enccrd->crd_klen >> 3;
+		cmd->cry_masks |= HIFN_CRYPT_CMD_NEW_KEY;
+
+		/* 
+		 * Need to specify the size for the AES key in the masks.
+		 */
+		if ((cmd->cry_masks & HIFN_CRYPT_CMD_ALG_MASK) ==
+		    HIFN_CRYPT_CMD_ALG_AES) {
+			switch (cmd->cklen) {
+			case 16:
+				cmd->cry_masks |= HIFN_CRYPT_CMD_KSZ_128;
+				break;
+			case 24:
+				cmd->cry_masks |= HIFN_CRYPT_CMD_KSZ_192;
+				break;
+			case 32:
+				cmd->cry_masks |= HIFN_CRYPT_CMD_KSZ_256;
+				break;
+			default:
+				DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__);
+				err = EINVAL;
+				goto errout;
+			}
+		}
+	}
+
+	if (maccrd) {
+		cmd->maccrd = maccrd;
+		cmd->base_masks |= HIFN_BASE_CMD_MAC;
+
+		switch (maccrd->crd_alg) {
+		case CRYPTO_MD5:
+			cmd->mac_masks |= HIFN_MAC_CMD_ALG_MD5 |
+			    HIFN_MAC_CMD_RESULT | HIFN_MAC_CMD_MODE_HASH |
+			    HIFN_MAC_CMD_POS_IPSEC;
+                       break;
+		case CRYPTO_MD5_HMAC:
+			cmd->mac_masks |= HIFN_MAC_CMD_ALG_MD5 |
+			    HIFN_MAC_CMD_RESULT | HIFN_MAC_CMD_MODE_HMAC |
+			    HIFN_MAC_CMD_POS_IPSEC | HIFN_MAC_CMD_TRUNC;
+			break;
+		case CRYPTO_SHA1:
+			cmd->mac_masks |= HIFN_MAC_CMD_ALG_SHA1 |
+			    HIFN_MAC_CMD_RESULT | HIFN_MAC_CMD_MODE_HASH |
+			    HIFN_MAC_CMD_POS_IPSEC;
+			break;
+		case CRYPTO_SHA1_HMAC:
+			cmd->mac_masks |= HIFN_MAC_CMD_ALG_SHA1 |
+			    HIFN_MAC_CMD_RESULT | HIFN_MAC_CMD_MODE_HMAC |
+			    HIFN_MAC_CMD_POS_IPSEC | HIFN_MAC_CMD_TRUNC;
+			break;
+		}
+
+		if (maccrd->crd_alg == CRYPTO_SHA1_HMAC ||
+		     maccrd->crd_alg == CRYPTO_MD5_HMAC) {
+			cmd->mac_masks |= HIFN_MAC_CMD_NEW_KEY;
+			bcopy(maccrd->crd_key, cmd->mac, maccrd->crd_klen >> 3);
+			bzero(cmd->mac + (maccrd->crd_klen >> 3),
+			    HIFN_MAC_KEY_LENGTH - (maccrd->crd_klen >> 3));
+		}
+	}
+
+	cmd->crp = crp;
+	cmd->session_num = session;
+	cmd->softc = sc;
+
+	err = hifn_crypto(sc, cmd, crp, hint);
+	if (!err) {
+		return 0;
+	} else if (err == ERESTART) {
+		/*
+		 * There weren't enough resources to dispatch the request
+		 * to the part.  Notify the caller so they'll requeue this
+		 * request and resubmit it again soon.
+		 */
+#ifdef HIFN_DEBUG
+		if (hifn_debug)
+			device_printf(sc->sc_dev, "requeue request\n");
+#endif
+		kfree(cmd);
+		sc->sc_needwakeup |= CRYPTO_SYMQ;
+		return (err);
+	}
+
+errout:
+	if (cmd != NULL)
+		kfree(cmd);
+	if (err == EINVAL)
+		hifnstats.hst_invalid++;
+	else
+		hifnstats.hst_nomem++;
+	crp->crp_etype = err;
+	crypto_done(crp);
+	return (err);
+}
+
+static void
+hifn_abort(struct hifn_softc *sc)
+{
+	struct hifn_dma *dma = sc->sc_dma;
+	struct hifn_command *cmd;
+	struct cryptop *crp;
+	int i, u;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	i = dma->resk; u = dma->resu;
+	while (u != 0) {
+		cmd = dma->hifn_commands[i];
+		KASSERT(cmd != NULL, ("hifn_abort: null command slot %u", i));
+		dma->hifn_commands[i] = NULL;
+		crp = cmd->crp;
+
+		if ((dma->resr[i].l & htole32(HIFN_D_VALID)) == 0) {
+			/* Salvage what we can. */
+			u_int8_t *macbuf;
+
+			if (cmd->base_masks & HIFN_BASE_CMD_MAC) {
+				macbuf = dma->result_bufs[i];
+				macbuf += 12;
+			} else
+				macbuf = NULL;
+			hifnstats.hst_opackets++;
+			hifn_callback(sc, cmd, macbuf);
+		} else {
+#if 0
+			if (cmd->src_map == cmd->dst_map) {
+				bus_dmamap_sync(sc->sc_dmat, cmd->src_map,
+				    BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
+			} else {
+				bus_dmamap_sync(sc->sc_dmat, cmd->src_map,
+				    BUS_DMASYNC_POSTWRITE);
+				bus_dmamap_sync(sc->sc_dmat, cmd->dst_map,
+				    BUS_DMASYNC_POSTREAD);
+			}
+#endif
+
+			if (cmd->src_skb != cmd->dst_skb) {
+#ifdef NOTYET
+				m_freem(cmd->src_m);
+				crp->crp_buf = (caddr_t)cmd->dst_m;
+#else
+				device_printf(sc->sc_dev,
+						"%s,%d: CRYPTO_F_SKBUF src != dst not implemented\n",
+						__FILE__, __LINE__);
+#endif
+			}
+
+			/* non-shared buffers cannot be restarted */
+			if (cmd->src_map != cmd->dst_map) {
+				/*
+				 * XXX should be EAGAIN, delayed until
+				 * after the reset.
+				 */
+				crp->crp_etype = ENOMEM;
+				pci_unmap_buf(sc, &cmd->dst);
+			} else
+				crp->crp_etype = ENOMEM;
+
+			pci_unmap_buf(sc, &cmd->src);
+
+			kfree(cmd);
+			if (crp->crp_etype != EAGAIN)
+				crypto_done(crp);
+		}
+
+		if (++i == HIFN_D_RES_RSIZE)
+			i = 0;
+		u--;
+	}
+	dma->resk = i; dma->resu = u;
+
+	hifn_reset_board(sc, 1);
+	hifn_init_dma(sc);
+	hifn_init_pci_registers(sc);
+}
+
+static void
+hifn_callback(struct hifn_softc *sc, struct hifn_command *cmd, u_int8_t *macbuf)
+{
+	struct hifn_dma *dma = sc->sc_dma;
+	struct cryptop *crp = cmd->crp;
+	struct cryptodesc *crd;
+	int i, u, ivlen;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+#if 0
+	if (cmd->src_map == cmd->dst_map) {
+		bus_dmamap_sync(sc->sc_dmat, cmd->src_map,
+		    BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD);
+	} else {
+		bus_dmamap_sync(sc->sc_dmat, cmd->src_map,
+		    BUS_DMASYNC_POSTWRITE);
+		bus_dmamap_sync(sc->sc_dmat, cmd->dst_map,
+		    BUS_DMASYNC_POSTREAD);
+	}
+#endif
+
+	if (crp->crp_flags & CRYPTO_F_SKBUF) {
+		if (cmd->src_skb != cmd->dst_skb) {
+#ifdef NOTYET
+			crp->crp_buf = (caddr_t)cmd->dst_m;
+			totlen = cmd->src_mapsize;
+			for (m = cmd->dst_m; m != NULL; m = m->m_next) {
+				if (totlen < m->m_len) {
+					m->m_len = totlen;
+					totlen = 0;
+				} else
+					totlen -= m->m_len;
+			}
+			cmd->dst_m->m_pkthdr.len = cmd->src_m->m_pkthdr.len;
+			m_freem(cmd->src_m);
+#else
+			device_printf(sc->sc_dev,
+					"%s,%d: CRYPTO_F_SKBUF src != dst not implemented\n",
+					__FILE__, __LINE__);
+#endif
+		}
+	}
+
+	if (cmd->sloplen != 0) {
+		crypto_copyback(crp->crp_flags, crp->crp_buf,
+		    cmd->src_mapsize - cmd->sloplen, cmd->sloplen,
+		    (caddr_t)&dma->slop[cmd->slopidx]);
+	}
+
+	i = dma->dstk; u = dma->dstu;
+	while (u != 0) {
+		if (i == HIFN_D_DST_RSIZE)
+			i = 0;
+#if 0
+		bus_dmamap_sync(sc->sc_dmat, sc->sc_dmamap,
+		    BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
+#endif
+		if (dma->dstr[i].l & htole32(HIFN_D_VALID)) {
+#if 0
+			bus_dmamap_sync(sc->sc_dmat, sc->sc_dmamap,
+			    BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
+#endif
+			break;
+		}
+		i++, u--;
+	}
+	dma->dstk = i; dma->dstu = u;
+
+	hifnstats.hst_obytes += cmd->dst_mapsize;
+
+	if ((cmd->base_masks & (HIFN_BASE_CMD_CRYPT | HIFN_BASE_CMD_DECODE)) ==
+	    HIFN_BASE_CMD_CRYPT) {
+		for (crd = crp->crp_desc; crd; crd = crd->crd_next) {
+			if (crd->crd_alg != CRYPTO_DES_CBC &&
+			    crd->crd_alg != CRYPTO_3DES_CBC &&
+			    crd->crd_alg != CRYPTO_AES_CBC)
+				continue;
+			ivlen = ((crd->crd_alg == CRYPTO_AES_CBC) ?
+				HIFN_AES_IV_LENGTH : HIFN_IV_LENGTH);
+			crypto_copydata(crp->crp_flags, crp->crp_buf,
+			    crd->crd_skip + crd->crd_len - ivlen, ivlen,
+			    cmd->softc->sc_sessions[cmd->session_num].hs_iv);
+			break;
+		}
+	}
+
+	if (macbuf != NULL) {
+		for (crd = crp->crp_desc; crd; crd = crd->crd_next) {
+                        int len;
+
+			if (crd->crd_alg != CRYPTO_MD5 &&
+			    crd->crd_alg != CRYPTO_SHA1 &&
+			    crd->crd_alg != CRYPTO_MD5_HMAC &&
+			    crd->crd_alg != CRYPTO_SHA1_HMAC) {
+				continue;
+			}
+			len = cmd->softc->sc_sessions[cmd->session_num].hs_mlen;
+			crypto_copyback(crp->crp_flags, crp->crp_buf,
+			    crd->crd_inject, len, macbuf);
+			break;
+		}
+	}
+
+	if (cmd->src_map != cmd->dst_map)
+		pci_unmap_buf(sc, &cmd->dst);
+	pci_unmap_buf(sc, &cmd->src);
+	kfree(cmd);
+	crypto_done(crp);
+}
+
+/*
+ * 7811 PB3 rev/2 parts lock-up on burst writes to Group 0
+ * and Group 1 registers; avoid conditions that could create
+ * burst writes by doing a read in between the writes.
+ *
+ * NB: The read we interpose is always to the same register;
+ *     we do this because reading from an arbitrary (e.g. last)
+ *     register may not always work.
+ */
+static void
+hifn_write_reg_0(struct hifn_softc *sc, bus_size_t reg, u_int32_t val)
+{
+	if (sc->sc_flags & HIFN_IS_7811) {
+		if (sc->sc_bar0_lastreg == reg - 4)
+			readl(sc->sc_bar0 + HIFN_0_PUCNFG);
+		sc->sc_bar0_lastreg = reg;
+	}
+	writel(val, sc->sc_bar0 + reg);
+}
+
+static void
+hifn_write_reg_1(struct hifn_softc *sc, bus_size_t reg, u_int32_t val)
+{
+	if (sc->sc_flags & HIFN_IS_7811) {
+		if (sc->sc_bar1_lastreg == reg - 4)
+			readl(sc->sc_bar1 + HIFN_1_REVID);
+		sc->sc_bar1_lastreg = reg;
+	}
+	writel(val, sc->sc_bar1 + reg);
+}
+
+
+static struct pci_device_id hifn_pci_tbl[] = {
+	{ PCI_VENDOR_HIFN, PCI_PRODUCT_HIFN_7951,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, },
+	{ PCI_VENDOR_HIFN, PCI_PRODUCT_HIFN_7955,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, },
+	{ PCI_VENDOR_HIFN, PCI_PRODUCT_HIFN_7956,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, },
+	{ PCI_VENDOR_NETSEC, PCI_PRODUCT_NETSEC_7751,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, },
+	{ PCI_VENDOR_INVERTEX, PCI_PRODUCT_INVERTEX_AEON,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, },
+	{ PCI_VENDOR_HIFN, PCI_PRODUCT_HIFN_7811,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, },
+	/*
+	 * Other vendors share this PCI ID as well, such as
+	 * http://www.powercrypt.com, and obviously they also
+	 * use the same key.
+	 */
+	{ PCI_VENDOR_HIFN, PCI_PRODUCT_HIFN_7751,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, },
+	{ 0, 0, 0, 0, 0, 0, }
+};
+MODULE_DEVICE_TABLE(pci, hifn_pci_tbl);
+
+static struct pci_driver hifn_driver = {
+	.name         = "hifn",
+	.id_table     = hifn_pci_tbl,
+	.probe        =	hifn_probe,
+	.remove       = hifn_remove,
+	/* add PM stuff here one day */
+};
+
+static int __init hifn_init (void)
+{
+	struct hifn_softc *sc = NULL;
+	int rc;
+
+	DPRINTF("%s(%p)\n", __FUNCTION__, hifn_init);
+
+	rc = pci_register_driver(&hifn_driver);
+	pci_register_driver_compat(&hifn_driver, rc);
+
+	return rc;
+}
+
+static void __exit hifn_exit (void)
+{
+	pci_unregister_driver(&hifn_driver);
+}
+
+module_init(hifn_init);
+module_exit(hifn_exit);
+
+MODULE_LICENSE("BSD");
+MODULE_AUTHOR("David McCullough <david_mccullough@mcafee.com>");
+MODULE_DESCRIPTION("OCF driver for hifn PCI crypto devices");
diff --git a/target/linux/generic/files/crypto/ocf/hifn/hifn7751reg.h b/target/linux/generic/files/crypto/ocf/hifn/hifn7751reg.h
new file mode 100644
index 0000000000..ccf54f9c4e
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/hifn/hifn7751reg.h
@@ -0,0 +1,540 @@
+/* $FreeBSD: src/sys/dev/hifn/hifn7751reg.h,v 1.7 2007/03/21 03:42:49 sam Exp $ */
+/*	$OpenBSD: hifn7751reg.h,v 1.35 2002/04/08 17:49:42 jason Exp $	*/
+
+/*-
+ * Invertex AEON / Hifn 7751 driver
+ * Copyright (c) 1999 Invertex Inc. All rights reserved.
+ * Copyright (c) 1999 Theo de Raadt
+ * Copyright (c) 2000-2001 Network Security Technologies, Inc.
+ *			http://www.netsec.net
+ *
+ * Please send any comments, feedback, bug-fixes, or feature requests to
+ * software@invertex.com.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Effort sponsored in part by the Defense Advanced Research Projects
+ * Agency (DARPA) and Air Force Research Laboratory, Air Force
+ * Materiel Command, USAF, under agreement number F30602-01-2-0537.
+ *
+ */
+#ifndef __HIFN_H__
+#define	__HIFN_H__
+
+/*
+ * Some PCI configuration space offset defines.  The names were made
+ * identical to the names used by the Linux kernel.
+ */
+#define	HIFN_BAR0		PCIR_BAR(0)	/* PUC register map */
+#define	HIFN_BAR1		PCIR_BAR(1)	/* DMA register map */
+#define	HIFN_TRDY_TIMEOUT	0x40
+#define	HIFN_RETRY_TIMEOUT	0x41
+
+/*
+ * PCI vendor and device identifiers
+ * (the names are preserved from their OpenBSD source).
+ */
+#define	PCI_VENDOR_HIFN		0x13a3		/* Hifn */
+#define	PCI_PRODUCT_HIFN_7751	0x0005		/* 7751 */
+#define	PCI_PRODUCT_HIFN_6500	0x0006		/* 6500 */
+#define	PCI_PRODUCT_HIFN_7811	0x0007		/* 7811 */
+#define	PCI_PRODUCT_HIFN_7855	0x001f		/* 7855 */
+#define	PCI_PRODUCT_HIFN_7951	0x0012		/* 7951 */
+#define	PCI_PRODUCT_HIFN_7955	0x0020		/* 7954/7955 */
+#define	PCI_PRODUCT_HIFN_7956	0x001d		/* 7956 */
+
+#define	PCI_VENDOR_INVERTEX	0x14e1		/* Invertex */
+#define	PCI_PRODUCT_INVERTEX_AEON 0x0005	/* AEON */
+
+#define	PCI_VENDOR_NETSEC	0x1660		/* NetSec */
+#define	PCI_PRODUCT_NETSEC_7751	0x7751		/* 7751 */
+
+/*
+ * The values below should multiple of 4 -- and be large enough to handle
+ * any command the driver implements.
+ *
+ * MAX_COMMAND = base command + mac command + encrypt command +
+ *			mac-key + rc4-key
+ * MAX_RESULT  = base result + mac result + mac + encrypt result
+ *			
+ *
+ */
+#define	HIFN_MAX_COMMAND	(8 + 8 + 8 + 64 + 260)
+#define	HIFN_MAX_RESULT		(8 + 4 + 20 + 4)
+
+/*
+ * hifn_desc_t
+ *
+ * Holds an individual descriptor for any of the rings.
+ */
+typedef struct hifn_desc {
+	volatile u_int32_t l;		/* length and status bits */
+	volatile u_int32_t p;
+} hifn_desc_t;
+
+/*
+ * Masks for the "length" field of struct hifn_desc.
+ */
+#define	HIFN_D_LENGTH		0x0000ffff	/* length bit mask */
+#define	HIFN_D_MASKDONEIRQ	0x02000000	/* mask the done interrupt */
+#define	HIFN_D_DESTOVER		0x04000000	/* destination overflow */
+#define	HIFN_D_OVER		0x08000000	/* overflow */
+#define	HIFN_D_LAST		0x20000000	/* last descriptor in chain */
+#define	HIFN_D_JUMP		0x40000000	/* jump descriptor */
+#define	HIFN_D_VALID		0x80000000	/* valid bit */
+
+
+/*
+ * Processing Unit Registers (offset from BASEREG0)
+ */
+#define	HIFN_0_PUDATA		0x00	/* Processing Unit Data */
+#define	HIFN_0_PUCTRL		0x04	/* Processing Unit Control */
+#define	HIFN_0_PUISR		0x08	/* Processing Unit Interrupt Status */
+#define	HIFN_0_PUCNFG		0x0c	/* Processing Unit Configuration */
+#define	HIFN_0_PUIER		0x10	/* Processing Unit Interrupt Enable */
+#define	HIFN_0_PUSTAT		0x14	/* Processing Unit Status/Chip ID */
+#define	HIFN_0_FIFOSTAT		0x18	/* FIFO Status */
+#define	HIFN_0_FIFOCNFG		0x1c	/* FIFO Configuration */
+#define	HIFN_0_PUCTRL2		0x28	/* Processing Unit Control (2nd map) */
+#define	HIFN_0_MUTE1		0x80
+#define	HIFN_0_MUTE2		0x90
+#define	HIFN_0_SPACESIZE	0x100	/* Register space size */
+
+/* Processing Unit Control Register (HIFN_0_PUCTRL) */
+#define	HIFN_PUCTRL_CLRSRCFIFO	0x0010	/* clear source fifo */
+#define	HIFN_PUCTRL_STOP	0x0008	/* stop pu */
+#define	HIFN_PUCTRL_LOCKRAM	0x0004	/* lock ram */
+#define	HIFN_PUCTRL_DMAENA	0x0002	/* enable dma */
+#define	HIFN_PUCTRL_RESET	0x0001	/* Reset processing unit */
+
+/* Processing Unit Interrupt Status Register (HIFN_0_PUISR) */
+#define	HIFN_PUISR_CMDINVAL	0x8000	/* Invalid command interrupt */
+#define	HIFN_PUISR_DATAERR	0x4000	/* Data error interrupt */
+#define	HIFN_PUISR_SRCFIFO	0x2000	/* Source FIFO ready interrupt */
+#define	HIFN_PUISR_DSTFIFO	0x1000	/* Destination FIFO ready interrupt */
+#define	HIFN_PUISR_DSTOVER	0x0200	/* Destination overrun interrupt */
+#define	HIFN_PUISR_SRCCMD	0x0080	/* Source command interrupt */
+#define	HIFN_PUISR_SRCCTX	0x0040	/* Source context interrupt */
+#define	HIFN_PUISR_SRCDATA	0x0020	/* Source data interrupt */
+#define	HIFN_PUISR_DSTDATA	0x0010	/* Destination data interrupt */
+#define	HIFN_PUISR_DSTRESULT	0x0004	/* Destination result interrupt */
+
+/* Processing Unit Configuration Register (HIFN_0_PUCNFG) */
+#define	HIFN_PUCNFG_DRAMMASK	0xe000	/* DRAM size mask */
+#define	HIFN_PUCNFG_DSZ_256K	0x0000	/* 256k dram */
+#define	HIFN_PUCNFG_DSZ_512K	0x2000	/* 512k dram */
+#define	HIFN_PUCNFG_DSZ_1M	0x4000	/* 1m dram */
+#define	HIFN_PUCNFG_DSZ_2M	0x6000	/* 2m dram */
+#define	HIFN_PUCNFG_DSZ_4M	0x8000	/* 4m dram */
+#define	HIFN_PUCNFG_DSZ_8M	0xa000	/* 8m dram */
+#define	HIFN_PUNCFG_DSZ_16M	0xc000	/* 16m dram */
+#define	HIFN_PUCNFG_DSZ_32M	0xe000	/* 32m dram */
+#define	HIFN_PUCNFG_DRAMREFRESH	0x1800	/* DRAM refresh rate mask */
+#define	HIFN_PUCNFG_DRFR_512	0x0000	/* 512 divisor of ECLK */
+#define	HIFN_PUCNFG_DRFR_256	0x0800	/* 256 divisor of ECLK */
+#define	HIFN_PUCNFG_DRFR_128	0x1000	/* 128 divisor of ECLK */
+#define	HIFN_PUCNFG_TCALLPHASES	0x0200	/* your guess is as good as mine... */
+#define	HIFN_PUCNFG_TCDRVTOTEM	0x0100	/* your guess is as good as mine... */
+#define	HIFN_PUCNFG_BIGENDIAN	0x0080	/* DMA big endian mode */
+#define	HIFN_PUCNFG_BUS32	0x0040	/* Bus width 32bits */
+#define	HIFN_PUCNFG_BUS16	0x0000	/* Bus width 16 bits */
+#define	HIFN_PUCNFG_CHIPID	0x0020	/* Allow chipid from PUSTAT */
+#define	HIFN_PUCNFG_DRAM	0x0010	/* Context RAM is DRAM */
+#define	HIFN_PUCNFG_SRAM	0x0000	/* Context RAM is SRAM */
+#define	HIFN_PUCNFG_COMPSING	0x0004	/* Enable single compression context */
+#define	HIFN_PUCNFG_ENCCNFG	0x0002	/* Encryption configuration */
+
+/* Processing Unit Interrupt Enable Register (HIFN_0_PUIER) */
+#define	HIFN_PUIER_CMDINVAL	0x8000	/* Invalid command interrupt */
+#define	HIFN_PUIER_DATAERR	0x4000	/* Data error interrupt */
+#define	HIFN_PUIER_SRCFIFO	0x2000	/* Source FIFO ready interrupt */
+#define	HIFN_PUIER_DSTFIFO	0x1000	/* Destination FIFO ready interrupt */
+#define	HIFN_PUIER_DSTOVER	0x0200	/* Destination overrun interrupt */
+#define	HIFN_PUIER_SRCCMD	0x0080	/* Source command interrupt */
+#define	HIFN_PUIER_SRCCTX	0x0040	/* Source context interrupt */
+#define	HIFN_PUIER_SRCDATA	0x0020	/* Source data interrupt */
+#define	HIFN_PUIER_DSTDATA	0x0010	/* Destination data interrupt */
+#define	HIFN_PUIER_DSTRESULT	0x0004	/* Destination result interrupt */
+
+/* Processing Unit Status Register/Chip ID (HIFN_0_PUSTAT) */
+#define	HIFN_PUSTAT_CMDINVAL	0x8000	/* Invalid command interrupt */
+#define	HIFN_PUSTAT_DATAERR	0x4000	/* Data error interrupt */
+#define	HIFN_PUSTAT_SRCFIFO	0x2000	/* Source FIFO ready interrupt */
+#define	HIFN_PUSTAT_DSTFIFO	0x1000	/* Destination FIFO ready interrupt */
+#define	HIFN_PUSTAT_DSTOVER	0x0200	/* Destination overrun interrupt */
+#define	HIFN_PUSTAT_SRCCMD	0x0080	/* Source command interrupt */
+#define	HIFN_PUSTAT_SRCCTX	0x0040	/* Source context interrupt */
+#define	HIFN_PUSTAT_SRCDATA	0x0020	/* Source data interrupt */
+#define	HIFN_PUSTAT_DSTDATA	0x0010	/* Destination data interrupt */
+#define	HIFN_PUSTAT_DSTRESULT	0x0004	/* Destination result interrupt */
+#define	HIFN_PUSTAT_CHIPREV	0x00ff	/* Chip revision mask */
+#define	HIFN_PUSTAT_CHIPENA	0xff00	/* Chip enabled mask */
+#define	HIFN_PUSTAT_ENA_2	0x1100	/* Level 2 enabled */
+#define	HIFN_PUSTAT_ENA_1	0x1000	/* Level 1 enabled */
+#define	HIFN_PUSTAT_ENA_0	0x3000	/* Level 0 enabled */
+#define	HIFN_PUSTAT_REV_2	0x0020	/* 7751 PT6/2 */
+#define	HIFN_PUSTAT_REV_3	0x0030	/* 7751 PT6/3 */
+
+/* FIFO Status Register (HIFN_0_FIFOSTAT) */
+#define	HIFN_FIFOSTAT_SRC	0x7f00	/* Source FIFO available */
+#define	HIFN_FIFOSTAT_DST	0x007f	/* Destination FIFO available */
+
+/* FIFO Configuration Register (HIFN_0_FIFOCNFG) */
+#define	HIFN_FIFOCNFG_THRESHOLD	0x0400	/* must be written as this value */
+
+/*
+ * DMA Interface Registers (offset from BASEREG1)
+ */
+#define	HIFN_1_DMA_CRAR		0x0c	/* DMA Command Ring Address */
+#define	HIFN_1_DMA_SRAR		0x1c	/* DMA Source Ring Address */
+#define	HIFN_1_DMA_RRAR		0x2c	/* DMA Result Ring Address */
+#define	HIFN_1_DMA_DRAR		0x3c	/* DMA Destination Ring Address */
+#define	HIFN_1_DMA_CSR		0x40	/* DMA Status and Control */
+#define	HIFN_1_DMA_IER		0x44	/* DMA Interrupt Enable */
+#define	HIFN_1_DMA_CNFG		0x48	/* DMA Configuration */
+#define	HIFN_1_PLL		0x4c	/* 7955/7956: PLL config */
+#define	HIFN_1_7811_RNGENA	0x60	/* 7811: rng enable */
+#define	HIFN_1_7811_RNGCFG	0x64	/* 7811: rng config */
+#define	HIFN_1_7811_RNGDAT	0x68	/* 7811: rng data */
+#define	HIFN_1_7811_RNGSTS	0x6c	/* 7811: rng status */
+#define	HIFN_1_DMA_CNFG2	0x6c	/* 7955/7956: dma config #2 */
+#define	HIFN_1_7811_MIPSRST	0x94	/* 7811: MIPS reset */
+#define	HIFN_1_REVID		0x98	/* Revision ID */
+
+#define	HIFN_1_PUB_RESET	0x204	/* Public/RNG Reset */
+#define	HIFN_1_PUB_BASE		0x300	/* Public Base Address */
+#define	HIFN_1_PUB_OPLEN	0x304	/* 7951-compat Public Operand Length */
+#define	HIFN_1_PUB_OP		0x308	/* 7951-compat Public Operand */
+#define	HIFN_1_PUB_STATUS	0x30c	/* 7951-compat Public Status */
+#define	HIFN_1_PUB_IEN		0x310	/* Public Interrupt enable */
+#define	HIFN_1_RNG_CONFIG	0x314	/* RNG config */
+#define	HIFN_1_RNG_DATA		0x318	/* RNG data */
+#define	HIFN_1_PUB_MODE		0x320	/* PK mode */
+#define	HIFN_1_PUB_FIFO_OPLEN	0x380	/* first element of oplen fifo */
+#define	HIFN_1_PUB_FIFO_OP	0x384	/* first element of op fifo */
+#define	HIFN_1_PUB_MEM		0x400	/* start of Public key memory */
+#define	HIFN_1_PUB_MEMEND	0xbff	/* end of Public key memory */
+
+/* DMA Status and Control Register (HIFN_1_DMA_CSR) */
+#define	HIFN_DMACSR_D_CTRLMASK	0xc0000000	/* Destinition Ring Control */
+#define	HIFN_DMACSR_D_CTRL_NOP	0x00000000	/* Dest. Control: no-op */
+#define	HIFN_DMACSR_D_CTRL_DIS	0x40000000	/* Dest. Control: disable */
+#define	HIFN_DMACSR_D_CTRL_ENA	0x80000000	/* Dest. Control: enable */
+#define	HIFN_DMACSR_D_ABORT	0x20000000	/* Destinition Ring PCIAbort */
+#define	HIFN_DMACSR_D_DONE	0x10000000	/* Destinition Ring Done */
+#define	HIFN_DMACSR_D_LAST	0x08000000	/* Destinition Ring Last */
+#define	HIFN_DMACSR_D_WAIT	0x04000000	/* Destinition Ring Waiting */
+#define	HIFN_DMACSR_D_OVER	0x02000000	/* Destinition Ring Overflow */
+#define	HIFN_DMACSR_R_CTRL	0x00c00000	/* Result Ring Control */
+#define	HIFN_DMACSR_R_CTRL_NOP	0x00000000	/* Result Control: no-op */
+#define	HIFN_DMACSR_R_CTRL_DIS	0x00400000	/* Result Control: disable */
+#define	HIFN_DMACSR_R_CTRL_ENA	0x00800000	/* Result Control: enable */
+#define	HIFN_DMACSR_R_ABORT	0x00200000	/* Result Ring PCI Abort */
+#define	HIFN_DMACSR_R_DONE	0x00100000	/* Result Ring Done */
+#define	HIFN_DMACSR_R_LAST	0x00080000	/* Result Ring Last */
+#define	HIFN_DMACSR_R_WAIT	0x00040000	/* Result Ring Waiting */
+#define	HIFN_DMACSR_R_OVER	0x00020000	/* Result Ring Overflow */
+#define	HIFN_DMACSR_S_CTRL	0x0000c000	/* Source Ring Control */
+#define	HIFN_DMACSR_S_CTRL_NOP	0x00000000	/* Source Control: no-op */
+#define	HIFN_DMACSR_S_CTRL_DIS	0x00004000	/* Source Control: disable */
+#define	HIFN_DMACSR_S_CTRL_ENA	0x00008000	/* Source Control: enable */
+#define	HIFN_DMACSR_S_ABORT	0x00002000	/* Source Ring PCI Abort */
+#define	HIFN_DMACSR_S_DONE	0x00001000	/* Source Ring Done */
+#define	HIFN_DMACSR_S_LAST	0x00000800	/* Source Ring Last */
+#define	HIFN_DMACSR_S_WAIT	0x00000400	/* Source Ring Waiting */
+#define	HIFN_DMACSR_ILLW	0x00000200	/* Illegal write (7811 only) */
+#define	HIFN_DMACSR_ILLR	0x00000100	/* Illegal read (7811 only) */
+#define	HIFN_DMACSR_C_CTRL	0x000000c0	/* Command Ring Control */
+#define	HIFN_DMACSR_C_CTRL_NOP	0x00000000	/* Command Control: no-op */
+#define	HIFN_DMACSR_C_CTRL_DIS	0x00000040	/* Command Control: disable */
+#define	HIFN_DMACSR_C_CTRL_ENA	0x00000080	/* Command Control: enable */
+#define	HIFN_DMACSR_C_ABORT	0x00000020	/* Command Ring PCI Abort */
+#define	HIFN_DMACSR_C_DONE	0x00000010	/* Command Ring Done */
+#define	HIFN_DMACSR_C_LAST	0x00000008	/* Command Ring Last */
+#define	HIFN_DMACSR_C_WAIT	0x00000004	/* Command Ring Waiting */
+#define	HIFN_DMACSR_PUBDONE	0x00000002	/* Public op done (7951 only) */
+#define	HIFN_DMACSR_ENGINE	0x00000001	/* Command Ring Engine IRQ */
+
+/* DMA Interrupt Enable Register (HIFN_1_DMA_IER) */
+#define	HIFN_DMAIER_D_ABORT	0x20000000	/* Destination Ring PCIAbort */
+#define	HIFN_DMAIER_D_DONE	0x10000000	/* Destination Ring Done */
+#define	HIFN_DMAIER_D_LAST	0x08000000	/* Destination Ring Last */
+#define	HIFN_DMAIER_D_WAIT	0x04000000	/* Destination Ring Waiting */
+#define	HIFN_DMAIER_D_OVER	0x02000000	/* Destination Ring Overflow */
+#define	HIFN_DMAIER_R_ABORT	0x00200000	/* Result Ring PCI Abort */
+#define	HIFN_DMAIER_R_DONE	0x00100000	/* Result Ring Done */
+#define	HIFN_DMAIER_R_LAST	0x00080000	/* Result Ring Last */
+#define	HIFN_DMAIER_R_WAIT	0x00040000	/* Result Ring Waiting */
+#define	HIFN_DMAIER_R_OVER	0x00020000	/* Result Ring Overflow */
+#define	HIFN_DMAIER_S_ABORT	0x00002000	/* Source Ring PCI Abort */
+#define	HIFN_DMAIER_S_DONE	0x00001000	/* Source Ring Done */
+#define	HIFN_DMAIER_S_LAST	0x00000800	/* Source Ring Last */
+#define	HIFN_DMAIER_S_WAIT	0x00000400	/* Source Ring Waiting */
+#define	HIFN_DMAIER_ILLW	0x00000200	/* Illegal write (7811 only) */
+#define	HIFN_DMAIER_ILLR	0x00000100	/* Illegal read (7811 only) */
+#define	HIFN_DMAIER_C_ABORT	0x00000020	/* Command Ring PCI Abort */
+#define	HIFN_DMAIER_C_DONE	0x00000010	/* Command Ring Done */
+#define	HIFN_DMAIER_C_LAST	0x00000008	/* Command Ring Last */
+#define	HIFN_DMAIER_C_WAIT	0x00000004	/* Command Ring Waiting */
+#define	HIFN_DMAIER_PUBDONE	0x00000002	/* public op done (7951 only) */
+#define	HIFN_DMAIER_ENGINE	0x00000001	/* Engine IRQ */
+
+/* DMA Configuration Register (HIFN_1_DMA_CNFG) */
+#define	HIFN_DMACNFG_BIGENDIAN	0x10000000	/* big endian mode */
+#define	HIFN_DMACNFG_POLLFREQ	0x00ff0000	/* Poll frequency mask */
+#define	HIFN_DMACNFG_UNLOCK	0x00000800
+#define	HIFN_DMACNFG_POLLINVAL	0x00000700	/* Invalid Poll Scalar */
+#define	HIFN_DMACNFG_LAST	0x00000010	/* Host control LAST bit */
+#define	HIFN_DMACNFG_MODE	0x00000004	/* DMA mode */
+#define	HIFN_DMACNFG_DMARESET	0x00000002	/* DMA Reset # */
+#define	HIFN_DMACNFG_MSTRESET	0x00000001	/* Master Reset # */
+
+/* DMA Configuration Register (HIFN_1_DMA_CNFG2) */
+#define	HIFN_DMACNFG2_PKSWAP32	(1 << 19)	/* swap the OPLEN/OP reg */
+#define	HIFN_DMACNFG2_PKSWAP8	(1 << 18)	/* swap the bits of OPLEN/OP */
+#define	HIFN_DMACNFG2_BAR0_SWAP32 (1<<17)	/* swap the bytes of BAR0 */
+#define	HIFN_DMACNFG2_BAR1_SWAP8 (1<<16)	/* swap the bits  of BAR0 */
+#define	HIFN_DMACNFG2_INIT_WRITE_BURST_SHIFT 12
+#define	HIFN_DMACNFG2_INIT_READ_BURST_SHIFT 8
+#define	HIFN_DMACNFG2_TGT_WRITE_BURST_SHIFT 4
+#define	HIFN_DMACNFG2_TGT_READ_BURST_SHIFT  0
+
+/* 7811 RNG Enable Register (HIFN_1_7811_RNGENA) */
+#define	HIFN_7811_RNGENA_ENA	0x00000001	/* enable RNG */
+
+/* 7811 RNG Config Register (HIFN_1_7811_RNGCFG) */
+#define	HIFN_7811_RNGCFG_PRE1	0x00000f00	/* first prescalar */
+#define	HIFN_7811_RNGCFG_OPRE	0x00000080	/* output prescalar */
+#define	HIFN_7811_RNGCFG_DEFL	0x00000f80	/* 2 words/ 1/100 sec */
+
+/* 7811 RNG Status Register (HIFN_1_7811_RNGSTS) */
+#define	HIFN_7811_RNGSTS_RDY	0x00004000	/* two numbers in FIFO */
+#define	HIFN_7811_RNGSTS_UFL	0x00001000	/* rng underflow */
+
+/* 7811 MIPS Reset Register (HIFN_1_7811_MIPSRST) */
+#define	HIFN_MIPSRST_BAR2SIZE	0xffff0000	/* sdram size */
+#define	HIFN_MIPSRST_GPRAMINIT	0x00008000	/* gpram can be accessed */
+#define	HIFN_MIPSRST_CRAMINIT	0x00004000	/* ctxram can be accessed */
+#define	HIFN_MIPSRST_LED2	0x00000400	/* external LED2 */
+#define	HIFN_MIPSRST_LED1	0x00000200	/* external LED1 */
+#define	HIFN_MIPSRST_LED0	0x00000100	/* external LED0 */
+#define	HIFN_MIPSRST_MIPSDIS	0x00000004	/* disable MIPS */
+#define	HIFN_MIPSRST_MIPSRST	0x00000002	/* warm reset MIPS */
+#define	HIFN_MIPSRST_MIPSCOLD	0x00000001	/* cold reset MIPS */
+
+/* Public key reset register (HIFN_1_PUB_RESET) */
+#define	HIFN_PUBRST_RESET	0x00000001	/* reset public/rng unit */
+
+/* Public operation register (HIFN_1_PUB_OP) */
+#define	HIFN_PUBOP_AOFFSET	0x0000003e	/* A offset */
+#define	HIFN_PUBOP_BOFFSET	0x00000fc0	/* B offset */
+#define	HIFN_PUBOP_MOFFSET	0x0003f000	/* M offset */
+#define	HIFN_PUBOP_OP_MASK	0x003c0000	/* Opcode: */
+#define	HIFN_PUBOP_OP_NOP	0x00000000	/*  NOP */
+#define	HIFN_PUBOP_OP_ADD	0x00040000	/*  ADD */
+#define	HIFN_PUBOP_OP_ADDC	0x00080000	/*  ADD w/carry */
+#define	HIFN_PUBOP_OP_SUB	0x000c0000	/*  SUB */
+#define	HIFN_PUBOP_OP_SUBC	0x00100000	/*  SUB w/carry */
+#define	HIFN_PUBOP_OP_MODADD	0x00140000	/*  Modular ADD */
+#define	HIFN_PUBOP_OP_MODSUB	0x00180000	/*  Modular SUB */
+#define	HIFN_PUBOP_OP_INCA	0x001c0000	/*  INC A */
+#define	HIFN_PUBOP_OP_DECA	0x00200000	/*  DEC A */
+#define	HIFN_PUBOP_OP_MULT	0x00240000	/*  MULT */
+#define	HIFN_PUBOP_OP_MODMULT	0x00280000	/*  Modular MULT */
+#define	HIFN_PUBOP_OP_MODRED	0x002c0000	/*  Modular Red */
+#define	HIFN_PUBOP_OP_MODEXP	0x00300000	/*  Modular Exp */
+
+/* Public operand length register (HIFN_1_PUB_OPLEN) */
+#define	HIFN_PUBOPLEN_MODLEN	0x0000007f
+#define	HIFN_PUBOPLEN_EXPLEN	0x0003ff80
+#define	HIFN_PUBOPLEN_REDLEN	0x003c0000
+
+/* Public status register (HIFN_1_PUB_STATUS) */
+#define	HIFN_PUBSTS_DONE	0x00000001	/* operation done */
+#define	HIFN_PUBSTS_CARRY	0x00000002	/* carry */
+#define	HIFN_PUBSTS_FIFO_EMPTY	0x00000100	/* fifo empty */
+#define	HIFN_PUBSTS_FIFO_FULL	0x00000200	/* fifo full */
+#define	HIFN_PUBSTS_FIFO_OVFL	0x00000400	/* fifo overflow */
+#define	HIFN_PUBSTS_FIFO_WRITE	0x000f0000	/* fifo write */
+#define	HIFN_PUBSTS_FIFO_READ	0x0f000000	/* fifo read */
+
+/* Public interrupt enable register (HIFN_1_PUB_IEN) */
+#define	HIFN_PUBIEN_DONE	0x00000001	/* operation done interrupt */
+
+/* Random number generator config register (HIFN_1_RNG_CONFIG) */
+#define	HIFN_RNGCFG_ENA		0x00000001	/* enable rng */
+
+/*
+ * Register offsets in register set 1
+ */
+
+#define	HIFN_UNLOCK_SECRET1	0xf4
+#define	HIFN_UNLOCK_SECRET2	0xfc
+
+/*
+ * PLL config register
+ *
+ * This register is present only on 7954/7955/7956 parts. It must be
+ * programmed according to the bus interface method used by the h/w.
+ * Note that the parts require a stable clock.  Since the PCI clock
+ * may vary the reference clock must usually be used.  To avoid
+ * overclocking the core logic, setup must be done carefully, refer
+ * to the driver for details.  The exact multiplier required varies
+ * by part and system configuration; refer to the Hifn documentation.
+ */
+#define	HIFN_PLL_REF_SEL	0x00000001	/* REF/HBI clk selection */
+#define	HIFN_PLL_BP		0x00000002	/* bypass (used during setup) */
+/* bit 2 reserved */
+#define	HIFN_PLL_PK_CLK_SEL	0x00000008	/* public key clk select */
+#define	HIFN_PLL_PE_CLK_SEL	0x00000010	/* packet engine clk select */
+/* bits 5-9 reserved */
+#define	HIFN_PLL_MBSET		0x00000400	/* must be set to 1 */
+#define	HIFN_PLL_ND		0x00003800	/* Fpll_ref multiplier select */
+#define	HIFN_PLL_ND_SHIFT	11
+#define	HIFN_PLL_ND_2		0x00000000	/* 2x */
+#define	HIFN_PLL_ND_4		0x00000800	/* 4x */
+#define	HIFN_PLL_ND_6		0x00001000	/* 6x */
+#define	HIFN_PLL_ND_8		0x00001800	/* 8x */
+#define	HIFN_PLL_ND_10		0x00002000	/* 10x */
+#define	HIFN_PLL_ND_12		0x00002800	/* 12x */
+/* bits 14-15 reserved */
+#define	HIFN_PLL_IS		0x00010000	/* charge pump current select */
+/* bits 17-31 reserved */
+
+/*
+ * Board configuration specifies only these bits.
+ */
+#define	HIFN_PLL_CONFIG		(HIFN_PLL_IS|HIFN_PLL_ND|HIFN_PLL_REF_SEL)
+
+/*
+ * Public Key Engine Mode Register
+ */
+#define	HIFN_PKMODE_HOSTINVERT	(1 << 0)	/* HOST INVERT */
+#define	HIFN_PKMODE_ENHANCED	(1 << 1)	/* Enable enhanced mode */
+
+
+/*********************************************************************
+ * Structs for board commands 
+ *
+ *********************************************************************/
+
+/*
+ * Structure to help build up the command data structure.
+ */
+typedef struct hifn_base_command {
+	volatile u_int16_t masks;
+	volatile u_int16_t session_num;
+	volatile u_int16_t total_source_count;
+	volatile u_int16_t total_dest_count;
+} hifn_base_command_t;
+
+#define	HIFN_BASE_CMD_MAC		0x0400
+#define	HIFN_BASE_CMD_CRYPT		0x0800
+#define	HIFN_BASE_CMD_DECODE		0x2000
+#define	HIFN_BASE_CMD_SRCLEN_M		0xc000
+#define	HIFN_BASE_CMD_SRCLEN_S		14
+#define	HIFN_BASE_CMD_DSTLEN_M		0x3000
+#define	HIFN_BASE_CMD_DSTLEN_S		12
+#define	HIFN_BASE_CMD_LENMASK_HI	0x30000
+#define	HIFN_BASE_CMD_LENMASK_LO	0x0ffff
+
+/*
+ * Structure to help build up the command data structure.
+ */
+typedef struct hifn_crypt_command {
+	volatile u_int16_t masks;
+	volatile u_int16_t header_skip;
+	volatile u_int16_t source_count;
+	volatile u_int16_t reserved;
+} hifn_crypt_command_t;
+
+#define	HIFN_CRYPT_CMD_ALG_MASK		0x0003		/* algorithm: */
+#define	HIFN_CRYPT_CMD_ALG_DES		0x0000		/*   DES */
+#define	HIFN_CRYPT_CMD_ALG_3DES		0x0001		/*   3DES */
+#define	HIFN_CRYPT_CMD_ALG_RC4		0x0002		/*   RC4 */
+#define	HIFN_CRYPT_CMD_ALG_AES		0x0003		/*   AES */
+#define	HIFN_CRYPT_CMD_MODE_MASK	0x0018		/* Encrypt mode: */
+#define	HIFN_CRYPT_CMD_MODE_ECB		0x0000		/*   ECB */
+#define	HIFN_CRYPT_CMD_MODE_CBC		0x0008		/*   CBC */
+#define	HIFN_CRYPT_CMD_MODE_CFB		0x0010		/*   CFB */
+#define	HIFN_CRYPT_CMD_MODE_OFB		0x0018		/*   OFB */
+#define	HIFN_CRYPT_CMD_CLR_CTX		0x0040		/* clear context */
+#define	HIFN_CRYPT_CMD_NEW_KEY		0x0800		/* expect new key */
+#define	HIFN_CRYPT_CMD_NEW_IV		0x1000		/* expect new iv */
+
+#define	HIFN_CRYPT_CMD_SRCLEN_M		0xc000
+#define	HIFN_CRYPT_CMD_SRCLEN_S		14
+
+#define	HIFN_CRYPT_CMD_KSZ_MASK		0x0600		/* AES key size: */
+#define	HIFN_CRYPT_CMD_KSZ_128		0x0000		/*   128 bit */
+#define	HIFN_CRYPT_CMD_KSZ_192		0x0200		/*   192 bit */
+#define	HIFN_CRYPT_CMD_KSZ_256		0x0400		/*   256 bit */
+
+/*
+ * Structure to help build up the command data structure.
+ */
+typedef struct hifn_mac_command {
+	volatile u_int16_t masks;
+	volatile u_int16_t header_skip;
+	volatile u_int16_t source_count;
+	volatile u_int16_t reserved;
+} hifn_mac_command_t;
+
+#define	HIFN_MAC_CMD_ALG_MASK		0x0001
+#define	HIFN_MAC_CMD_ALG_SHA1		0x0000
+#define	HIFN_MAC_CMD_ALG_MD5		0x0001
+#define	HIFN_MAC_CMD_MODE_MASK		0x000c
+#define	HIFN_MAC_CMD_MODE_HMAC		0x0000
+#define	HIFN_MAC_CMD_MODE_SSL_MAC	0x0004
+#define	HIFN_MAC_CMD_MODE_HASH		0x0008
+#define	HIFN_MAC_CMD_MODE_FULL		0x0004
+#define	HIFN_MAC_CMD_TRUNC		0x0010
+#define	HIFN_MAC_CMD_RESULT		0x0020
+#define	HIFN_MAC_CMD_APPEND		0x0040
+#define	HIFN_MAC_CMD_SRCLEN_M		0xc000
+#define	HIFN_MAC_CMD_SRCLEN_S		14
+
+/*
+ * MAC POS IPsec initiates authentication after encryption on encodes
+ * and before decryption on decodes.
+ */
+#define	HIFN_MAC_CMD_POS_IPSEC		0x0200
+#define	HIFN_MAC_CMD_NEW_KEY		0x0800
+
+/*
+ * The poll frequency and poll scalar defines are unshifted values used
+ * to set fields in the DMA Configuration Register.
+ */
+#ifndef HIFN_POLL_FREQUENCY
+#define	HIFN_POLL_FREQUENCY	0x1
+#endif
+
+#ifndef HIFN_POLL_SCALAR
+#define	HIFN_POLL_SCALAR	0x0
+#endif
+
+#define	HIFN_MAX_SEGLEN 	0xffff		/* maximum dma segment len */
+#define	HIFN_MAX_DMALEN		0x3ffff		/* maximum dma length */
+#endif /* __HIFN_H__ */
diff --git a/target/linux/generic/files/crypto/ocf/hifn/hifn7751var.h b/target/linux/generic/files/crypto/ocf/hifn/hifn7751var.h
new file mode 100644
index 0000000000..9a5f2319db
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/hifn/hifn7751var.h
@@ -0,0 +1,369 @@
+/* $FreeBSD: src/sys/dev/hifn/hifn7751var.h,v 1.9 2007/03/21 03:42:49 sam Exp $ */
+/*	$OpenBSD: hifn7751var.h,v 1.42 2002/04/08 17:49:42 jason Exp $	*/
+
+/*-
+ * Invertex AEON / Hifn 7751 driver
+ * Copyright (c) 1999 Invertex Inc. All rights reserved.
+ * Copyright (c) 1999 Theo de Raadt
+ * Copyright (c) 2000-2001 Network Security Technologies, Inc.
+ *			http://www.netsec.net
+ *
+ * Please send any comments, feedback, bug-fixes, or feature requests to
+ * software@invertex.com.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Effort sponsored in part by the Defense Advanced Research Projects
+ * Agency (DARPA) and Air Force Research Laboratory, Air Force
+ * Materiel Command, USAF, under agreement number F30602-01-2-0537.
+ *
+ */
+
+#ifndef __HIFN7751VAR_H__
+#define __HIFN7751VAR_H__
+
+#ifdef __KERNEL__
+
+/*
+ * Some configurable values for the driver.  By default command+result
+ * descriptor rings are the same size.  The src+dst descriptor rings
+ * are sized at 3.5x the number of potential commands.  Slower parts
+ * (e.g. 7951) tend to run out of src descriptors; faster parts (7811)
+ * src+cmd/result descriptors.  It's not clear that increasing the size
+ * of the descriptor rings helps performance significantly as other
+ * factors tend to come into play (e.g. copying misaligned packets).
+ */
+#define	HIFN_D_CMD_RSIZE	24	/* command descriptors */
+#define	HIFN_D_SRC_RSIZE	((HIFN_D_CMD_RSIZE * 7) / 2)	/* source descriptors */
+#define	HIFN_D_RES_RSIZE	HIFN_D_CMD_RSIZE	/* result descriptors */
+#define	HIFN_D_DST_RSIZE	HIFN_D_SRC_RSIZE	/* destination descriptors */
+
+/*
+ *  Length values for cryptography
+ */
+#define HIFN_DES_KEY_LENGTH		8
+#define HIFN_3DES_KEY_LENGTH		24
+#define HIFN_MAX_CRYPT_KEY_LENGTH	HIFN_3DES_KEY_LENGTH
+#define HIFN_IV_LENGTH			8
+#define	HIFN_AES_IV_LENGTH		16
+#define HIFN_MAX_IV_LENGTH		HIFN_AES_IV_LENGTH
+
+/*
+ *  Length values for authentication
+ */
+#define HIFN_MAC_KEY_LENGTH		64
+#define HIFN_MD5_LENGTH			16
+#define HIFN_SHA1_LENGTH		20
+#define HIFN_MAC_TRUNC_LENGTH		12
+
+#define MAX_SCATTER 64
+
+/*
+ * Data structure to hold all 4 rings and any other ring related data.
+ */
+struct hifn_dma {
+	/*
+	 *  Descriptor rings.  We add +1 to the size to accomidate the
+	 *  jump descriptor.
+	 */
+	struct hifn_desc	cmdr[HIFN_D_CMD_RSIZE+1];
+	struct hifn_desc	srcr[HIFN_D_SRC_RSIZE+1];
+	struct hifn_desc	dstr[HIFN_D_DST_RSIZE+1];
+	struct hifn_desc	resr[HIFN_D_RES_RSIZE+1];
+
+	struct hifn_command	*hifn_commands[HIFN_D_RES_RSIZE];
+
+	u_char			command_bufs[HIFN_D_CMD_RSIZE][HIFN_MAX_COMMAND];
+	u_char			result_bufs[HIFN_D_CMD_RSIZE][HIFN_MAX_RESULT];
+	u_int32_t		slop[HIFN_D_CMD_RSIZE];
+
+	u_int64_t		test_src, test_dst;
+
+	/*
+	 *  Our current positions for insertion and removal from the desriptor
+	 *  rings. 
+	 */
+	int			cmdi, srci, dsti, resi;
+	volatile int		cmdu, srcu, dstu, resu;
+	int			cmdk, srck, dstk, resk;
+};
+
+struct hifn_session {
+	int hs_used;
+	int hs_mlen;
+	u_int8_t hs_iv[HIFN_MAX_IV_LENGTH];
+};
+
+#define	HIFN_RING_SYNC(sc, r, i, f)					\
+	/* DAVIDM bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_dmamap, (f)) */
+
+#define	HIFN_CMDR_SYNC(sc, i, f)	HIFN_RING_SYNC((sc), cmdr, (i), (f))
+#define	HIFN_RESR_SYNC(sc, i, f)	HIFN_RING_SYNC((sc), resr, (i), (f))
+#define	HIFN_SRCR_SYNC(sc, i, f)	HIFN_RING_SYNC((sc), srcr, (i), (f))
+#define	HIFN_DSTR_SYNC(sc, i, f)	HIFN_RING_SYNC((sc), dstr, (i), (f))
+
+#define	HIFN_CMD_SYNC(sc, i, f)						\
+	/* DAVIDM bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_dmamap, (f)) */
+
+#define	HIFN_RES_SYNC(sc, i, f)						\
+	/* DAVIDM bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_dmamap, (f)) */
+
+typedef int bus_size_t;
+
+/*
+ * Holds data specific to a single HIFN board.
+ */
+struct hifn_softc {
+	softc_device_decl		 sc_dev;
+
+	struct pci_dev		*sc_pcidev;	/* PCI device pointer */
+	spinlock_t		sc_mtx;		/* per-instance lock */
+
+	int			sc_num;		/* for multiple devs */
+
+	ocf_iomem_t		sc_bar0;
+	bus_size_t		sc_bar0_lastreg;/* bar0 last reg written */
+	ocf_iomem_t		sc_bar1;
+	bus_size_t		sc_bar1_lastreg;/* bar1 last reg written */
+
+	int			sc_irq;
+
+	u_int32_t		sc_dmaier;
+	u_int32_t		sc_drammodel;	/* 1=dram, 0=sram */
+	u_int32_t		sc_pllconfig;	/* 7954/7955/7956 PLL config */
+
+	struct hifn_dma		*sc_dma;
+	dma_addr_t		sc_dma_physaddr;/* physical address of sc_dma */
+
+	int			sc_dmansegs;
+	int32_t			sc_cid;
+	int			sc_maxses;
+	int			sc_nsessions;
+	struct hifn_session	*sc_sessions;
+	int			sc_ramsize;
+	int			sc_flags;
+#define	HIFN_HAS_RNG		0x1	/* includes random number generator */
+#define	HIFN_HAS_PUBLIC		0x2	/* includes public key support */
+#define	HIFN_HAS_AES		0x4	/* includes AES support */
+#define	HIFN_IS_7811		0x8	/* Hifn 7811 part */
+#define	HIFN_IS_7956		0x10	/* Hifn 7956/7955 don't have SDRAM */
+
+	struct timer_list	sc_tickto;	/* for managing DMA */
+
+	int			sc_rngfirst;
+	int			sc_rnghz;	/* RNG polling frequency */
+
+	int			sc_c_busy;	/* command ring busy */
+	int			sc_s_busy;	/* source data ring busy */
+	int			sc_d_busy;	/* destination data ring busy */
+	int			sc_r_busy;	/* result ring busy */
+	int			sc_active;	/* for initial countdown */
+	int			sc_needwakeup;	/* ops q'd wating on resources */
+	int			sc_curbatch;	/* # ops submitted w/o int */
+	int			sc_suspended;
+#ifdef HIFN_VULCANDEV
+	struct cdev            *sc_pkdev;
+#endif
+};
+
+#define	HIFN_LOCK(_sc)		spin_lock_irqsave(&(_sc)->sc_mtx, l_flags)
+#define	HIFN_UNLOCK(_sc)	spin_unlock_irqrestore(&(_sc)->sc_mtx, l_flags)
+
+/*
+ *  hifn_command_t
+ *
+ *  This is the control structure used to pass commands to hifn_encrypt().
+ *
+ *  flags
+ *  -----
+ *  Flags is the bitwise "or" values for command configuration.  A single
+ *  encrypt direction needs to be set:
+ *
+ *	HIFN_ENCODE or HIFN_DECODE
+ *
+ *  To use cryptography, a single crypto algorithm must be included:
+ *
+ *	HIFN_CRYPT_3DES or HIFN_CRYPT_DES
+ *
+ *  To use authentication is used, a single MAC algorithm must be included:
+ *
+ *	HIFN_MAC_MD5 or HIFN_MAC_SHA1
+ *
+ *  By default MD5 uses a 16 byte hash and SHA-1 uses a 20 byte hash.
+ *  If the value below is set, hash values are truncated or assumed
+ *  truncated to 12 bytes:
+ *
+ *	HIFN_MAC_TRUNC
+ *
+ *  Keys for encryption and authentication can be sent as part of a command,
+ *  or the last key value used with a particular session can be retrieved
+ *  and used again if either of these flags are not specified.
+ *
+ *	HIFN_CRYPT_NEW_KEY, HIFN_MAC_NEW_KEY
+ *
+ *  session_num
+ *  -----------
+ *  A number between 0 and 2048 (for DRAM models) or a number between 
+ *  0 and 768 (for SRAM models).  Those who don't want to use session
+ *  numbers should leave value at zero and send a new crypt key and/or
+ *  new MAC key on every command.  If you use session numbers and
+ *  don't send a key with a command, the last key sent for that same
+ *  session number will be used.
+ *
+ *  Warning:  Using session numbers and multiboard at the same time
+ *            is currently broken.
+ *
+ *  mbuf
+ *  ----
+ *  Either fill in the mbuf pointer and npa=0 or
+ *	 fill packp[] and packl[] and set npa to > 0
+ * 
+ *  mac_header_skip
+ *  ---------------
+ *  The number of bytes of the source_buf that are skipped over before
+ *  authentication begins.  This must be a number between 0 and 2^16-1
+ *  and can be used by IPsec implementers to skip over IP headers.
+ *  *** Value ignored if authentication not used ***
+ *
+ *  crypt_header_skip
+ *  -----------------
+ *  The number of bytes of the source_buf that are skipped over before
+ *  the cryptographic operation begins.  This must be a number between 0
+ *  and 2^16-1.  For IPsec, this number will always be 8 bytes larger
+ *  than the auth_header_skip (to skip over the ESP header).
+ *  *** Value ignored if cryptography not used ***
+ *
+ */
+struct hifn_operand {
+	union {
+		struct sk_buff *skb;
+		struct uio *io;
+		unsigned char *buf;
+	} u;
+	void		*map;
+	bus_size_t	mapsize;
+	int		nsegs;
+	struct {
+	    dma_addr_t  ds_addr;
+	    int         ds_len;
+	} segs[MAX_SCATTER];
+};
+
+struct hifn_command {
+	u_int16_t session_num;
+	u_int16_t base_masks, cry_masks, mac_masks;
+	u_int8_t iv[HIFN_MAX_IV_LENGTH], *ck, mac[HIFN_MAC_KEY_LENGTH];
+	int cklen;
+	int sloplen, slopidx;
+
+	struct hifn_operand src;
+	struct hifn_operand dst;
+
+	struct hifn_softc *softc;
+	struct cryptop *crp;
+	struct cryptodesc *enccrd, *maccrd;
+};
+
+#define	src_skb		src.u.skb
+#define	src_io		src.u.io
+#define	src_map		src.map
+#define	src_mapsize	src.mapsize
+#define	src_segs	src.segs
+#define	src_nsegs	src.nsegs
+#define	src_buf		src.u.buf
+
+#define	dst_skb		dst.u.skb
+#define	dst_io		dst.u.io
+#define	dst_map		dst.map
+#define	dst_mapsize	dst.mapsize
+#define	dst_segs	dst.segs
+#define	dst_nsegs	dst.nsegs
+#define	dst_buf		dst.u.buf
+
+/*
+ *  Return values for hifn_crypto()
+ */
+#define HIFN_CRYPTO_SUCCESS	0
+#define HIFN_CRYPTO_BAD_INPUT	(-1)
+#define HIFN_CRYPTO_RINGS_FULL	(-2)
+
+/**************************************************************************
+ *
+ *  Function:  hifn_crypto
+ *
+ *  Purpose:   Called by external drivers to begin an encryption on the
+ *             HIFN board.
+ *
+ *  Blocking/Non-blocking Issues
+ *  ============================
+ *  The driver cannot block in hifn_crypto (no calls to tsleep) currently.
+ *  hifn_crypto() returns HIFN_CRYPTO_RINGS_FULL if there is not enough
+ *  room in any of the rings for the request to proceed.
+ *
+ *  Return Values
+ *  =============
+ *  0 for success, negative values on error
+ *
+ *  Defines for negative error codes are:
+ *  
+ *    HIFN_CRYPTO_BAD_INPUT  :  The passed in command had invalid settings.
+ *    HIFN_CRYPTO_RINGS_FULL :  All DMA rings were full and non-blocking
+ *                              behaviour was requested.
+ *
+ *************************************************************************/
+
+/*
+ * Convert back and forth from 'sid' to 'card' and 'session'
+ */
+#define HIFN_CARD(sid)		(((sid) & 0xf0000000) >> 28)
+#define HIFN_SESSION(sid)	((sid) & 0x000007ff)
+#define HIFN_SID(crd,ses)	(((crd) << 28) | ((ses) & 0x7ff))
+
+#endif /* _KERNEL */
+
+struct hifn_stats {
+	u_int64_t hst_ibytes;
+	u_int64_t hst_obytes;
+	u_int32_t hst_ipackets;
+	u_int32_t hst_opackets;
+	u_int32_t hst_invalid;
+	u_int32_t hst_nomem;		/* malloc or one of hst_nomem_* */
+	u_int32_t hst_abort;
+	u_int32_t hst_noirq;		/* IRQ for no reason */
+	u_int32_t hst_totbatch;		/* ops submitted w/o interrupt */
+	u_int32_t hst_maxbatch;		/* max ops submitted together */
+	u_int32_t hst_unaligned;	/* unaligned src caused copy */
+	/*
+	 * The following divides hst_nomem into more specific buckets.
+	 */
+	u_int32_t hst_nomem_map;	/* bus_dmamap_create failed */
+	u_int32_t hst_nomem_load;	/* bus_dmamap_load_* failed */
+	u_int32_t hst_nomem_mbuf;	/* MGET* failed */
+	u_int32_t hst_nomem_mcl;	/* MCLGET* failed */
+	u_int32_t hst_nomem_cr;		/* out of command/result descriptor */
+	u_int32_t hst_nomem_sd;		/* out of src/dst descriptors */
+};
+
+#endif /* __HIFN7751VAR_H__ */
diff --git a/target/linux/generic/files/crypto/ocf/hifn/hifnHIPP.c b/target/linux/generic/files/crypto/ocf/hifn/hifnHIPP.c
new file mode 100644
index 0000000000..802708d72c
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/hifn/hifnHIPP.c
@@ -0,0 +1,423 @@
+/*-
+ * Driver for Hifn HIPP-I/II chipset
+ * Copyright (c) 2006 Michael Richardson <mcr@xelerance.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in the
+ *   documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Effort sponsored by Hifn Inc.
+ *
+ */
+
+/*
+ * Driver for various Hifn encryption processors.
+ */
+#ifndef AUTOCONF_INCLUDED
+#include <linux/config.h>
+#endif
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/wait.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/random.h>
+#include <linux/version.h>
+#include <linux/skbuff.h>
+#include <linux/uio.h>
+#include <linux/sysfs.h>
+#include <linux/miscdevice.h>
+#include <asm/io.h>
+
+#include <cryptodev.h>
+
+#include "hifnHIPPreg.h"
+#include "hifnHIPPvar.h"
+
+#if 1
+#define	DPRINTF(a...)	if (hipp_debug) { \
+							printk("%s: ", sc ? \
+								device_get_nameunit(sc->sc_dev) : "hifn"); \
+							printk(a); \
+						} else
+#else
+#define	DPRINTF(a...)
+#endif
+
+typedef int bus_size_t;
+
+static inline int
+pci_get_revid(struct pci_dev *dev)
+{
+	u8 rid = 0;
+	pci_read_config_byte(dev, PCI_REVISION_ID, &rid);
+	return rid;
+}
+
+#define debug hipp_debug
+int hipp_debug = 0;
+module_param(hipp_debug, int, 0644);
+MODULE_PARM_DESC(hipp_debug, "Enable debug");
+
+int hipp_maxbatch = 1;
+module_param(hipp_maxbatch, int, 0644);
+MODULE_PARM_DESC(hipp_maxbatch, "max ops to batch w/o interrupt");
+
+static	int  hipp_probe(struct pci_dev *dev, const struct pci_device_id *ent);
+static	void hipp_remove(struct pci_dev *dev);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19)
+static irqreturn_t hipp_intr(int irq, void *arg);
+#else
+static irqreturn_t hipp_intr(int irq, void *arg, struct pt_regs *regs);
+#endif
+
+static int hipp_num_chips = 0;
+static struct hipp_softc *hipp_chip_idx[HIPP_MAX_CHIPS];
+
+static	int hipp_newsession(device_t, u_int32_t *, struct cryptoini *);
+static	int hipp_freesession(device_t, u_int64_t);
+static	int hipp_process(device_t, struct cryptop *, int);
+
+static device_method_t hipp_methods = {
+	/* crypto device methods */
+	DEVMETHOD(cryptodev_newsession,	hipp_newsession),
+	DEVMETHOD(cryptodev_freesession,hipp_freesession),
+	DEVMETHOD(cryptodev_process,	hipp_process),
+};
+
+static __inline u_int32_t
+READ_REG(struct hipp_softc *sc, unsigned int barno, bus_size_t reg)
+{
+	u_int32_t v = readl(sc->sc_bar[barno] + reg);
+	//sc->sc_bar0_lastreg = (bus_size_t) -1;
+	return (v);
+}
+static __inline void
+WRITE_REG(struct hipp_softc *sc, unsigned int barno, bus_size_t reg, u_int32_t val)
+{
+	writel(val, sc->sc_bar[barno] + reg);
+}
+
+#define READ_REG_0(sc, reg)         READ_REG(sc, 0, reg)
+#define WRITE_REG_0(sc, reg, val)   WRITE_REG(sc,0, reg, val)
+#define READ_REG_1(sc, reg)         READ_REG(sc, 1, reg)
+#define WRITE_REG_1(sc, reg, val)   WRITE_REG(sc,1, reg, val)
+
+static int
+hipp_newsession(device_t dev, u_int32_t *sidp, struct cryptoini *cri)
+{
+	return EINVAL;
+}
+
+static int
+hipp_freesession(device_t dev, u_int64_t tid)
+{
+	return EINVAL;
+}
+
+static int
+hipp_process(device_t dev, struct cryptop *crp, int hint)
+{
+	return EINVAL;
+}
+
+static const char*
+hipp_partname(struct hipp_softc *sc, char buf[128], size_t blen)
+{
+	char *n = NULL;
+
+	switch (pci_get_vendor(sc->sc_pcidev)) {
+	case PCI_VENDOR_HIFN:
+		switch (pci_get_device(sc->sc_pcidev)) {
+		case PCI_PRODUCT_HIFN_7855:	n = "Hifn 7855";
+		case PCI_PRODUCT_HIFN_8155:	n = "Hifn 8155";
+		case PCI_PRODUCT_HIFN_6500:	n = "Hifn 6500";
+		}
+	}
+
+	if(n==NULL) {
+		snprintf(buf, blen, "VID=%02x,PID=%02x",
+			 pci_get_vendor(sc->sc_pcidev),
+			 pci_get_device(sc->sc_pcidev));
+	} else {
+		buf[0]='\0';
+		strncat(buf, n, blen);
+	}
+	return buf;
+}
+
+struct hipp_fs_entry {
+	struct attribute attr;
+	/* other stuff */
+};
+
+
+static ssize_t
+cryptoid_show(struct device *dev,
+	      struct device_attribute *attr,
+	      char *buf)						
+{								
+	struct hipp_softc *sc;					
+
+	sc = pci_get_drvdata(to_pci_dev (dev));
+	return sprintf (buf, "%d\n", sc->sc_cid);
+}
+
+struct device_attribute hipp_dev_cryptoid = __ATTR_RO(cryptoid);
+
+/*
+ * Attach an interface that successfully probed.
+ */
+static int
+hipp_probe(struct pci_dev *dev, const struct pci_device_id *ent)
+{
+	struct hipp_softc *sc = NULL;
+	int i;
+	//char rbase;
+	//u_int16_t ena;
+	int rev;
+	//int rseg;
+	int rc;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	if (pci_enable_device(dev) < 0)
+		return(-ENODEV);
+
+#ifdef CONFIG_HAVE_PCI_SET_MWI
+	if (pci_set_mwi(dev))
+		return(-ENODEV);
+#endif
+
+	if (!dev->irq) {
+		printk("hifn: found device with no IRQ assigned. check BIOS settings!");
+		pci_disable_device(dev);
+		return(-ENODEV);
+	}
+
+	sc = (struct hipp_softc *) kmalloc(sizeof(*sc), GFP_KERNEL);
+	if (!sc)
+		return(-ENOMEM);
+	memset(sc, 0, sizeof(*sc));
+
+	softc_device_init(sc, "hifn-hipp", hipp_num_chips, hipp_methods);
+
+	sc->sc_pcidev = dev;
+	sc->sc_irq = -1;
+	sc->sc_cid = -1;
+	sc->sc_num = hipp_num_chips++;
+
+	if (sc->sc_num < HIPP_MAX_CHIPS)
+		hipp_chip_idx[sc->sc_num] = sc;
+
+	pci_set_drvdata(sc->sc_pcidev, sc);
+
+	spin_lock_init(&sc->sc_mtx);
+
+	/*
+	 * Setup PCI resources.
+	 * The READ_REG_0, WRITE_REG_0, READ_REG_1,
+	 * and WRITE_REG_1 macros throughout the driver are used
+	 * to permit better debugging.
+	 */
+	for(i=0; i<4; i++) {
+		unsigned long mem_start, mem_len;
+		mem_start = pci_resource_start(sc->sc_pcidev, i);
+		mem_len   = pci_resource_len(sc->sc_pcidev, i);
+		sc->sc_barphy[i] = (caddr_t)mem_start;
+		sc->sc_bar[i] = (ocf_iomem_t) ioremap(mem_start, mem_len);
+		if (!sc->sc_bar[i]) {
+			device_printf(sc->sc_dev, "cannot map bar%d register space\n", i);
+			goto fail;
+		}
+	}
+
+	//hipp_reset_board(sc, 0);
+	pci_set_master(sc->sc_pcidev);
+
+	/*
+	 * Arrange the interrupt line.
+	 */
+	rc = request_irq(dev->irq, hipp_intr, IRQF_SHARED, "hifn", sc);
+	if (rc) {
+		device_printf(sc->sc_dev, "could not map interrupt: %d\n", rc);
+		goto fail;
+	}
+	sc->sc_irq = dev->irq;
+
+	rev = READ_REG_1(sc, HIPP_1_REVID) & 0xffff;
+
+	{
+		char b[32];
+		device_printf(sc->sc_dev, "%s, rev %u",
+			      hipp_partname(sc, b, sizeof(b)), rev);
+	}
+
+#if 0
+	if (sc->sc_flags & HIFN_IS_7956)
+		printf(", pll=0x%x<%s clk, %ux mult>",
+			sc->sc_pllconfig,
+			sc->sc_pllconfig & HIFN_PLL_REF_SEL ? "ext" : "pci",
+			2 + 2*((sc->sc_pllconfig & HIFN_PLL_ND) >> 11));
+#endif
+	printf("\n");
+
+	sc->sc_cid = crypto_get_driverid(softc_get_device(sc),CRYPTOCAP_F_HARDWARE);
+	if (sc->sc_cid < 0) {
+		device_printf(sc->sc_dev, "could not get crypto driver id\n");
+		goto fail;
+	}
+
+#if 0 /* cannot work with a non-GPL module */
+	/* make a sysfs entry to let the world know what entry we got */
+	sysfs_create_file(&sc->sc_pcidev->dev.kobj, &hipp_dev_cryptoid.attr);
+#endif
+
+#if 0
+	init_timer(&sc->sc_tickto);
+	sc->sc_tickto.function = hifn_tick;
+	sc->sc_tickto.data = (unsigned long) sc->sc_num;
+	mod_timer(&sc->sc_tickto, jiffies + HZ);
+#endif
+
+#if 0 /* no code here yet ?? */
+	crypto_register(sc->sc_cid, CRYPTO_3DES_CBC, 0, 0);
+#endif
+
+	return (0);
+
+fail:
+	if (sc->sc_cid >= 0)
+		crypto_unregister_all(sc->sc_cid);
+	if (sc->sc_irq != -1)
+		free_irq(sc->sc_irq, sc);
+	
+#if 0
+	if (sc->sc_dma) {
+		/* Turn off DMA polling */
+		WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET |
+			    HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE);
+		
+		pci_free_consistent(sc->sc_pcidev,
+				    sizeof(*sc->sc_dma),
+				    sc->sc_dma, sc->sc_dma_physaddr);
+	}
+#endif
+	kfree(sc);
+	return (-ENXIO);
+}
+
+/*
+ * Detach an interface that successfully probed.
+ */
+static void
+hipp_remove(struct pci_dev *dev)
+{
+	struct hipp_softc *sc = pci_get_drvdata(dev);
+	unsigned long l_flags;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	/* disable interrupts */
+	HIPP_LOCK(sc);
+
+#if 0
+	WRITE_REG_1(sc, HIFN_1_DMA_IER, 0);
+	HIFN_UNLOCK(sc);
+
+	/*XXX other resources */
+	del_timer_sync(&sc->sc_tickto);
+
+	/* Turn off DMA polling */
+	WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET |
+	    HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE);
+#endif
+
+	crypto_unregister_all(sc->sc_cid);
+
+	free_irq(sc->sc_irq, sc);
+
+#if 0
+	pci_free_consistent(sc->sc_pcidev, sizeof(*sc->sc_dma),
+                sc->sc_dma, sc->sc_dma_physaddr);
+#endif
+}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19)
+static irqreturn_t hipp_intr(int irq, void *arg)
+#else
+static irqreturn_t hipp_intr(int irq, void *arg, struct pt_regs *regs)
+#endif
+{
+	struct hipp_softc *sc = arg;
+
+	sc = sc; /* shut up compiler */
+
+	return IRQ_HANDLED;
+}
+
+static struct pci_device_id hipp_pci_tbl[] = {
+	{ PCI_VENDOR_HIFN, PCI_PRODUCT_HIFN_7855,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, },
+	{ PCI_VENDOR_HIFN, PCI_PRODUCT_HIFN_8155,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, },
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, hipp_pci_tbl);
+
+static struct pci_driver hipp_driver = {
+	.name         = "hipp",
+	.id_table     = hipp_pci_tbl,
+	.probe        =	hipp_probe,
+	.remove       = hipp_remove,
+	/* add PM stuff here one day */
+};
+
+static int __init hipp_init (void)
+{
+	struct hipp_softc *sc = NULL;
+	int rc;
+
+	DPRINTF("%s(%p)\n", __FUNCTION__, hipp_init);
+
+	rc = pci_register_driver(&hipp_driver);
+	pci_register_driver_compat(&hipp_driver, rc);
+
+	return rc;
+}
+
+static void __exit hipp_exit (void)
+{
+	pci_unregister_driver(&hipp_driver);
+}
+
+module_init(hipp_init);
+module_exit(hipp_exit);
+
+MODULE_LICENSE("BSD");
+MODULE_AUTHOR("Michael Richardson <mcr@xelerance.com>");
+MODULE_DESCRIPTION("OCF driver for hifn HIPP-I/II PCI crypto devices");
diff --git a/target/linux/generic/files/crypto/ocf/hifn/hifnHIPPreg.h b/target/linux/generic/files/crypto/ocf/hifn/hifnHIPPreg.h
new file mode 100644
index 0000000000..8c0e72038f
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/hifn/hifnHIPPreg.h
@@ -0,0 +1,46 @@
+/*-
+ * Hifn HIPP-I/HIPP-II (7855/8155) driver.
+ * Copyright (c) 2006 Michael Richardson <mcr@xelerance.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Effort sponsored by Hifn inc.
+ *
+ */
+
+#ifndef __HIFNHIPP_H__
+#define	__HIFNHIPP_H__
+
+/*
+ * PCI vendor and device identifiers
+ */
+#define	PCI_VENDOR_HIFN		0x13a3		/* Hifn */
+#define	PCI_PRODUCT_HIFN_6500	0x0006		/* 6500 */
+#define	PCI_PRODUCT_HIFN_7855	0x001f		/* 7855 */
+#define	PCI_PRODUCT_HIFN_8155	0x999		/* XXX 8155 */
+
+#define HIPP_1_REVID            0x01 /* BOGUS */
+
+#endif /* __HIPP_H__ */
diff --git a/target/linux/generic/files/crypto/ocf/hifn/hifnHIPPvar.h b/target/linux/generic/files/crypto/ocf/hifn/hifnHIPPvar.h
new file mode 100644
index 0000000000..61d292fb5e
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/hifn/hifnHIPPvar.h
@@ -0,0 +1,93 @@
+/*
+ * Hifn HIPP-I/HIPP-II (7855/8155) driver.
+ * Copyright (c) 2006 Michael Richardson <mcr@xelerance.com> * 
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Effort sponsored by Hifn inc.
+ *
+ */
+
+#ifndef __HIFNHIPPVAR_H__
+#define __HIFNHIPPVAR_H__
+
+#define HIPP_MAX_CHIPS 8
+
+/*
+ * Holds data specific to a single Hifn HIPP-I board.
+ */
+struct hipp_softc {
+	softc_device_decl		 sc_dev;
+
+	struct pci_dev		*sc_pcidev;	/* device backpointer */
+	ocf_iomem_t             sc_bar[5];
+	caddr_t		        sc_barphy[5];   /* physical address */
+	int			sc_num;		/* for multiple devs */
+	spinlock_t		sc_mtx;		/* per-instance lock */
+	int32_t			sc_cid;
+	int			sc_irq;
+
+#if 0
+
+	u_int32_t		sc_dmaier;
+	u_int32_t		sc_drammodel;	/* 1=dram, 0=sram */
+	u_int32_t		sc_pllconfig;	/* 7954/7955/7956 PLL config */
+
+	struct hifn_dma		*sc_dma;
+	dma_addr_t		sc_dma_physaddr;/* physical address of sc_dma */
+
+	int			sc_dmansegs;
+	int			sc_maxses;
+	int			sc_nsessions;
+	struct hifn_session	*sc_sessions;
+	int			sc_ramsize;
+	int			sc_flags;
+#define	HIFN_HAS_RNG		0x1	/* includes random number generator */
+#define	HIFN_HAS_PUBLIC		0x2	/* includes public key support */
+#define	HIFN_HAS_AES		0x4	/* includes AES support */
+#define	HIFN_IS_7811		0x8	/* Hifn 7811 part */
+#define	HIFN_IS_7956		0x10	/* Hifn 7956/7955 don't have SDRAM */
+
+	struct timer_list	sc_tickto;	/* for managing DMA */
+
+	int			sc_rngfirst;
+	int			sc_rnghz;	/* RNG polling frequency */
+
+	int			sc_c_busy;	/* command ring busy */
+	int			sc_s_busy;	/* source data ring busy */
+	int			sc_d_busy;	/* destination data ring busy */
+	int			sc_r_busy;	/* result ring busy */
+	int			sc_active;	/* for initial countdown */
+	int			sc_needwakeup;	/* ops q'd wating on resources */
+	int			sc_curbatch;	/* # ops submitted w/o int */
+	int			sc_suspended;
+	struct miscdevice       sc_miscdev;
+#endif
+};
+
+#define	HIPP_LOCK(_sc)		spin_lock_irqsave(&(_sc)->sc_mtx, l_flags)
+#define	HIPP_UNLOCK(_sc)	spin_unlock_irqrestore(&(_sc)->sc_mtx, l_flags)
+
+#endif /* __HIFNHIPPVAR_H__ */
diff --git a/target/linux/generic/files/crypto/ocf/ixp4xx/Makefile b/target/linux/generic/files/crypto/ocf/ixp4xx/Makefile
new file mode 100644
index 0000000000..d94a3b79fa
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/ixp4xx/Makefile
@@ -0,0 +1,104 @@
+# for SGlinux builds
+-include $(ROOTDIR)/modules/.config
+
+#
+# You will need to point this at your Intel ixp425 includes,  this portion
+# of the Makefile only really works under SGLinux with the appropriate libs
+# installed.  They can be downloaded from http://www.snapgear.org/
+#
+ifeq ($(CONFIG_CPU_IXP46X),y)
+IXPLATFORM = ixp46X
+else
+ifeq ($(CONFIG_CPU_IXP43X),y)
+IXPLATFORM = ixp43X
+else
+IXPLATFORM = ixp42X
+endif
+endif
+
+ifdef CONFIG_IXP400_LIB_2_4
+IX_XSCALE_SW = $(ROOTDIR)/modules/ixp425/ixp400-2.4/ixp400_xscale_sw
+OSAL_DIR     = $(ROOTDIR)/modules/ixp425/ixp400-2.4/ixp_osal
+endif
+ifdef CONFIG_IXP400_LIB_2_1
+IX_XSCALE_SW = $(ROOTDIR)/modules/ixp425/ixp400-2.1/ixp400_xscale_sw
+OSAL_DIR     = $(ROOTDIR)/modules/ixp425/ixp400-2.1/ixp_osal
+endif
+ifdef CONFIG_IXP400_LIB_2_0
+IX_XSCALE_SW = $(ROOTDIR)/modules/ixp425/ixp400-2.0/ixp400_xscale_sw
+OSAL_DIR     = $(ROOTDIR)/modules/ixp425/ixp400-2.0/ixp_osal
+endif
+ifdef IX_XSCALE_SW
+ifdef CONFIG_IXP400_LIB_2_4
+IXP_CFLAGS = \
+	-I$(ROOTDIR)/. \
+	-I$(IX_XSCALE_SW)/src/include \
+	-I$(OSAL_DIR)/common/include/ \
+	-I$(OSAL_DIR)/common/include/modules/ \
+	-I$(OSAL_DIR)/common/include/modules/ddk/ \
+	-I$(OSAL_DIR)/common/include/modules/bufferMgt/ \
+	-I$(OSAL_DIR)/common/include/modules/ioMem/ \
+	-I$(OSAL_DIR)/common/os/linux/include/ \
+	-I$(OSAL_DIR)/common/os/linux/include/core/  \
+	-I$(OSAL_DIR)/common/os/linux/include/modules/ \
+	-I$(OSAL_DIR)/common/os/linux/include/modules/ddk/ \
+	-I$(OSAL_DIR)/common/os/linux/include/modules/bufferMgt/ \
+	-I$(OSAL_DIR)/common/os/linux/include/modules/ioMem/ \
+	-I$(OSAL_DIR)/platforms/$(IXPLATFORM)/include/ \
+	-I$(OSAL_DIR)/platforms/$(IXPLATFORM)/os/linux/include/ \
+	-DENABLE_IOMEM -DENABLE_BUFFERMGT -DENABLE_DDK \
+	-DUSE_IXP4XX_CRYPTO
+else
+IXP_CFLAGS = \
+	-I$(ROOTDIR)/. \
+	-I$(IX_XSCALE_SW)/src/include \
+	-I$(OSAL_DIR)/ \
+	-I$(OSAL_DIR)/os/linux/include/ \
+	-I$(OSAL_DIR)/os/linux/include/modules/ \
+	-I$(OSAL_DIR)/os/linux/include/modules/ioMem/ \
+	-I$(OSAL_DIR)/os/linux/include/modules/bufferMgt/ \
+	-I$(OSAL_DIR)/os/linux/include/core/  \
+	-I$(OSAL_DIR)/os/linux/include/platforms/ \
+	-I$(OSAL_DIR)/os/linux/include/platforms/ixp400/ \
+	-I$(OSAL_DIR)/os/linux/include/platforms/ixp400/ixp425 \
+	-I$(OSAL_DIR)/os/linux/include/platforms/ixp400/ixp465 \
+	-I$(OSAL_DIR)/os/linux/include/core/ \
+	-I$(OSAL_DIR)/include/ \
+	-I$(OSAL_DIR)/include/modules/ \
+	-I$(OSAL_DIR)/include/modules/bufferMgt/ \
+	-I$(OSAL_DIR)/include/modules/ioMem/ \
+	-I$(OSAL_DIR)/include/platforms/ \
+	-I$(OSAL_DIR)/include/platforms/ixp400/ \
+	-DUSE_IXP4XX_CRYPTO
+endif
+endif
+ifdef CONFIG_IXP400_LIB_1_4
+IXP_CFLAGS   = \
+	-I$(ROOTDIR)/. \
+	-I$(ROOTDIR)/modules/ixp425/ixp400-1.4/ixp400_xscale_sw/src/include \
+	-I$(ROOTDIR)/modules/ixp425/ixp400-1.4/ixp400_xscale_sw/src/linux \
+	-DUSE_IXP4XX_CRYPTO
+endif
+ifndef IXPDIR
+IXPDIR = ixp-version-is-not-supported
+endif
+
+ifeq ($(CONFIG_CPU_IXP46X),y)
+IXP_CFLAGS += -D__ixp46X
+else
+ifeq ($(CONFIG_CPU_IXP43X),y)
+IXP_CFLAGS += -D__ixp43X
+else
+IXP_CFLAGS += -D__ixp42X
+endif
+endif
+
+obj-$(CONFIG_OCF_IXP4XX) += ixp4xx.o
+
+obj ?= .
+EXTRA_CFLAGS += $(IXP_CFLAGS) -I$(obj)/.. -I$(obj)/.
+
+ifdef TOPDIR
+-include $(TOPDIR)/Rules.make
+endif
+
diff --git a/target/linux/generic/files/crypto/ocf/ixp4xx/ixp4xx.c b/target/linux/generic/files/crypto/ocf/ixp4xx/ixp4xx.c
new file mode 100644
index 0000000000..d5414a4ef5
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/ixp4xx/ixp4xx.c
@@ -0,0 +1,1324 @@
+/*
+ * An OCF module that uses Intels IXP CryptACC API to do the crypto.
+ * This driver requires the IXP400 Access Library that is available
+ * from Intel in order to operate (or compile).
+ *
+ * Written by David McCullough <david_mccullough@mcafee.com>
+ * Copyright (C) 2006-2010 David McCullough
+ * Copyright (C) 2004-2005 Intel Corporation.
+ *
+ * LICENSE TERMS
+ *
+ * The free distribution and use of this software in both source and binary
+ * form is allowed (with or without changes) provided that:
+ *
+ *   1. distributions of this source code include the above copyright
+ *      notice, this list of conditions and the following disclaimer;
+ *
+ *   2. distributions in binary form include the above copyright
+ *      notice, this list of conditions and the following disclaimer
+ *      in the documentation and/or other associated materials;
+ *
+ *   3. the copyright holder's name is not used to endorse products
+ *      built using this software without specific written permission.
+ *
+ * ALTERNATIVELY, provided that this notice is retained in full, this product
+ * may be distributed under the terms of the GNU General Public License (GPL),
+ * in which case the provisions of the GPL apply INSTEAD OF those given above.
+ *
+ * DISCLAIMER
+ *
+ * This software is provided 'as is' with no explicit or implied warranties
+ * in respect of its properties, including, but not limited to, correctness
+ * and/or fitness for purpose.
+ */
+
+#ifndef AUTOCONF_INCLUDED
+#include <linux/config.h>
+#endif
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/crypto.h>
+#include <linux/interrupt.h>
+#include <asm/scatterlist.h>
+
+#include <IxTypes.h>
+#include <IxOsBuffMgt.h>
+#include <IxNpeDl.h>
+#include <IxCryptoAcc.h>
+#include <IxQMgr.h>
+#include <IxOsServices.h>
+#include <IxOsCacheMMU.h>
+
+#include <cryptodev.h>
+#include <uio.h>
+
+#ifndef IX_MBUF_PRIV
+#define IX_MBUF_PRIV(x) ((x)->priv)
+#endif
+
+struct ixp_data;
+
+struct ixp_q {
+	struct list_head	 ixp_q_list;
+	struct ixp_data		*ixp_q_data;
+	struct cryptop		*ixp_q_crp;
+	struct cryptodesc	*ixp_q_ccrd;
+	struct cryptodesc	*ixp_q_acrd;
+	IX_MBUF				 ixp_q_mbuf;
+	UINT8				*ixp_hash_dest; /* Location for hash in client buffer */
+	UINT8				*ixp_hash_src; /* Location of hash in internal buffer */
+	unsigned char		 ixp_q_iv_data[IX_CRYPTO_ACC_MAX_CIPHER_IV_LENGTH];
+	unsigned char		*ixp_q_iv;
+};
+
+struct ixp_data {
+	int					 ixp_registered;	/* is the context registered */
+	int					 ixp_crd_flags;		/* detect direction changes */
+
+	int					 ixp_cipher_alg;
+	int					 ixp_auth_alg;
+
+	UINT32				 ixp_ctx_id;
+	UINT32				 ixp_hash_key_id;	/* used when hashing */
+	IxCryptoAccCtx		 ixp_ctx;
+	IX_MBUF				 ixp_pri_mbuf;
+	IX_MBUF				 ixp_sec_mbuf;
+
+	struct work_struct   ixp_pending_work;
+	struct work_struct   ixp_registration_work;
+	struct list_head	 ixp_q;				/* unprocessed requests */
+};
+
+#ifdef __ixp46X
+
+#define	MAX_IOP_SIZE	64	/* words */
+#define	MAX_OOP_SIZE	128
+
+#define	MAX_PARAMS		3
+
+struct ixp_pkq {
+	struct list_head			 pkq_list;
+	struct cryptkop				*pkq_krp;
+
+	IxCryptoAccPkeEauInOperands	 pkq_op;
+	IxCryptoAccPkeEauOpResult	 pkq_result;
+
+	UINT32						 pkq_ibuf0[MAX_IOP_SIZE];
+	UINT32						 pkq_ibuf1[MAX_IOP_SIZE];
+	UINT32						 pkq_ibuf2[MAX_IOP_SIZE];
+	UINT32						 pkq_obuf[MAX_OOP_SIZE];
+};
+
+static LIST_HEAD(ixp_pkq); /* current PK wait list */
+static struct ixp_pkq *ixp_pk_cur;
+static spinlock_t ixp_pkq_lock;
+
+#endif /* __ixp46X */
+
+static int ixp_blocked = 0;
+
+static int32_t			 ixp_id = -1;
+static struct ixp_data **ixp_sessions = NULL;
+static u_int32_t		 ixp_sesnum = 0;
+
+static int ixp_process(device_t, struct cryptop *, int);
+static int ixp_newsession(device_t, u_int32_t *, struct cryptoini *);
+static int ixp_freesession(device_t, u_int64_t);
+#ifdef __ixp46X
+static int ixp_kprocess(device_t, struct cryptkop *krp, int hint);
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
+static kmem_cache_t *qcache;
+#else
+static struct kmem_cache *qcache;
+#endif
+
+#define debug ixp_debug
+static int ixp_debug = 0;
+module_param(ixp_debug, int, 0644);
+MODULE_PARM_DESC(ixp_debug, "Enable debug");
+
+static int ixp_init_crypto = 1;
+module_param(ixp_init_crypto, int, 0444); /* RO after load/boot */
+MODULE_PARM_DESC(ixp_init_crypto, "Call ixCryptoAccInit (default is 1)");
+
+static void ixp_process_pending(void *arg);
+static void ixp_registration(void *arg);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
+static void ixp_process_pending_wq(struct work_struct *work);
+static void ixp_registration_wq(struct work_struct *work);
+#endif
+
+/*
+ * dummy device structure
+ */
+
+static struct {
+	softc_device_decl	sc_dev;
+} ixpdev;
+
+static device_method_t ixp_methods = {
+	/* crypto device methods */
+	DEVMETHOD(cryptodev_newsession,	ixp_newsession),
+	DEVMETHOD(cryptodev_freesession,ixp_freesession),
+	DEVMETHOD(cryptodev_process,	ixp_process),
+#ifdef __ixp46X
+	DEVMETHOD(cryptodev_kprocess,	ixp_kprocess),
+#endif
+};
+
+/*
+ * Generate a new software session.
+ */
+static int
+ixp_newsession(device_t dev, u_int32_t *sid, struct cryptoini *cri)
+{
+	struct ixp_data *ixp;
+	u_int32_t i;
+#define AUTH_LEN(cri, def) \
+	(cri->cri_mlen ? cri->cri_mlen : (def))
+
+	dprintk("%s():alg %d\n", __FUNCTION__,cri->cri_alg);
+	if (sid == NULL || cri == NULL) {
+		dprintk("%s,%d - EINVAL\n", __FILE__, __LINE__);
+		return EINVAL;
+	}
+
+	if (ixp_sessions) {
+		for (i = 1; i < ixp_sesnum; i++)
+			if (ixp_sessions[i] == NULL)
+				break;
+	} else
+		i = 1;		/* NB: to silence compiler warning */
+
+	if (ixp_sessions == NULL || i == ixp_sesnum) {
+		struct ixp_data **ixpd;
+
+		if (ixp_sessions == NULL) {
+			i = 1; /* We leave ixp_sessions[0] empty */
+			ixp_sesnum = CRYPTO_SW_SESSIONS;
+		} else
+			ixp_sesnum *= 2;
+
+		ixpd = kmalloc(ixp_sesnum * sizeof(struct ixp_data *), SLAB_ATOMIC);
+		if (ixpd == NULL) {
+			/* Reset session number */
+			if (ixp_sesnum == CRYPTO_SW_SESSIONS)
+				ixp_sesnum = 0;
+			else
+				ixp_sesnum /= 2;
+			dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__);
+			return ENOBUFS;
+		}
+		memset(ixpd, 0, ixp_sesnum * sizeof(struct ixp_data *));
+
+		/* Copy existing sessions */
+		if (ixp_sessions) {
+			memcpy(ixpd, ixp_sessions,
+			    (ixp_sesnum / 2) * sizeof(struct ixp_data *));
+			kfree(ixp_sessions);
+		}
+
+		ixp_sessions = ixpd;
+	}
+
+	ixp_sessions[i] = (struct ixp_data *) kmalloc(sizeof(struct ixp_data),
+			SLAB_ATOMIC);
+	if (ixp_sessions[i] == NULL) {
+		ixp_freesession(NULL, i);
+		dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+		return ENOBUFS;
+	}
+
+	*sid = i;
+
+	ixp = ixp_sessions[i];
+	memset(ixp, 0, sizeof(*ixp));
+
+	ixp->ixp_cipher_alg = -1;
+	ixp->ixp_auth_alg = -1;
+	ixp->ixp_ctx_id = -1;
+	INIT_LIST_HEAD(&ixp->ixp_q);
+
+	ixp->ixp_ctx.useDifferentSrcAndDestMbufs = 0;
+
+	while (cri) {
+		switch (cri->cri_alg) {
+		case CRYPTO_DES_CBC:
+			ixp->ixp_cipher_alg = cri->cri_alg;
+			ixp->ixp_ctx.cipherCtx.cipherAlgo = IX_CRYPTO_ACC_CIPHER_DES;
+			ixp->ixp_ctx.cipherCtx.cipherMode = IX_CRYPTO_ACC_MODE_CBC;
+			ixp->ixp_ctx.cipherCtx.cipherKeyLen = (cri->cri_klen + 7) / 8;
+			ixp->ixp_ctx.cipherCtx.cipherBlockLen = IX_CRYPTO_ACC_DES_BLOCK_64;
+			ixp->ixp_ctx.cipherCtx.cipherInitialVectorLen =
+						IX_CRYPTO_ACC_DES_IV_64;
+			memcpy(ixp->ixp_ctx.cipherCtx.key.cipherKey,
+					cri->cri_key, (cri->cri_klen + 7) / 8);
+			break;
+
+		case CRYPTO_3DES_CBC:
+			ixp->ixp_cipher_alg = cri->cri_alg;
+			ixp->ixp_ctx.cipherCtx.cipherAlgo = IX_CRYPTO_ACC_CIPHER_3DES;
+			ixp->ixp_ctx.cipherCtx.cipherMode = IX_CRYPTO_ACC_MODE_CBC;
+			ixp->ixp_ctx.cipherCtx.cipherKeyLen = (cri->cri_klen + 7) / 8;
+			ixp->ixp_ctx.cipherCtx.cipherBlockLen = IX_CRYPTO_ACC_DES_BLOCK_64;
+			ixp->ixp_ctx.cipherCtx.cipherInitialVectorLen =
+						IX_CRYPTO_ACC_DES_IV_64;
+			memcpy(ixp->ixp_ctx.cipherCtx.key.cipherKey,
+					cri->cri_key, (cri->cri_klen + 7) / 8);
+			break;
+
+		case CRYPTO_RIJNDAEL128_CBC:
+			ixp->ixp_cipher_alg = cri->cri_alg;
+			ixp->ixp_ctx.cipherCtx.cipherAlgo = IX_CRYPTO_ACC_CIPHER_AES;
+			ixp->ixp_ctx.cipherCtx.cipherMode = IX_CRYPTO_ACC_MODE_CBC;
+			ixp->ixp_ctx.cipherCtx.cipherKeyLen = (cri->cri_klen + 7) / 8;
+			ixp->ixp_ctx.cipherCtx.cipherBlockLen = 16;
+			ixp->ixp_ctx.cipherCtx.cipherInitialVectorLen = 16;
+			memcpy(ixp->ixp_ctx.cipherCtx.key.cipherKey,
+					cri->cri_key, (cri->cri_klen + 7) / 8);
+			break;
+
+		case CRYPTO_MD5:
+		case CRYPTO_MD5_HMAC:
+			ixp->ixp_auth_alg = cri->cri_alg;
+			ixp->ixp_ctx.authCtx.authAlgo = IX_CRYPTO_ACC_AUTH_MD5;
+			ixp->ixp_ctx.authCtx.authDigestLen = AUTH_LEN(cri, MD5_HASH_LEN);
+			ixp->ixp_ctx.authCtx.aadLen = 0;
+			/* Only MD5_HMAC needs a key */
+			if (cri->cri_alg == CRYPTO_MD5_HMAC) {
+				ixp->ixp_ctx.authCtx.authKeyLen = (cri->cri_klen + 7) / 8;
+				if (ixp->ixp_ctx.authCtx.authKeyLen >
+						sizeof(ixp->ixp_ctx.authCtx.key.authKey)) {
+					printk(
+						"ixp4xx: Invalid key length for MD5_HMAC - %d bits\n",
+							cri->cri_klen);
+					ixp_freesession(NULL, i);
+					return EINVAL;
+				}
+				memcpy(ixp->ixp_ctx.authCtx.key.authKey,
+						cri->cri_key, (cri->cri_klen + 7) / 8);
+			}
+			break;
+
+		case CRYPTO_SHA1:
+		case CRYPTO_SHA1_HMAC:
+			ixp->ixp_auth_alg = cri->cri_alg;
+			ixp->ixp_ctx.authCtx.authAlgo = IX_CRYPTO_ACC_AUTH_SHA1;
+			ixp->ixp_ctx.authCtx.authDigestLen = AUTH_LEN(cri, SHA1_HASH_LEN);
+			ixp->ixp_ctx.authCtx.aadLen = 0;
+			/* Only SHA1_HMAC needs a key */
+			if (cri->cri_alg == CRYPTO_SHA1_HMAC) {
+				ixp->ixp_ctx.authCtx.authKeyLen = (cri->cri_klen + 7) / 8;
+				if (ixp->ixp_ctx.authCtx.authKeyLen >
+						sizeof(ixp->ixp_ctx.authCtx.key.authKey)) {
+					printk(
+						"ixp4xx: Invalid key length for SHA1_HMAC - %d bits\n",
+							cri->cri_klen);
+					ixp_freesession(NULL, i);
+					return EINVAL;
+				}
+				memcpy(ixp->ixp_ctx.authCtx.key.authKey,
+						cri->cri_key, (cri->cri_klen + 7) / 8);
+			}
+			break;
+
+		default:
+			printk("ixp: unknown algo 0x%x\n", cri->cri_alg);
+			ixp_freesession(NULL, i);
+			return EINVAL;
+		}
+		cri = cri->cri_next;
+	}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
+	INIT_WORK(&ixp->ixp_pending_work, ixp_process_pending_wq);
+	INIT_WORK(&ixp->ixp_registration_work, ixp_registration_wq);
+#else
+	INIT_WORK(&ixp->ixp_pending_work, ixp_process_pending, ixp);
+	INIT_WORK(&ixp->ixp_registration_work, ixp_registration, ixp);
+#endif
+
+	return 0;
+}
+
+
+/*
+ * Free a session.
+ */
+static int
+ixp_freesession(device_t dev, u_int64_t tid)
+{
+	u_int32_t sid = CRYPTO_SESID2LID(tid);
+
+	dprintk("%s()\n", __FUNCTION__);
+	if (sid > ixp_sesnum || ixp_sessions == NULL ||
+			ixp_sessions[sid] == NULL) {
+		dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+		return EINVAL;
+	}
+
+	/* Silently accept and return */
+	if (sid == 0)
+		return 0;
+
+	if (ixp_sessions[sid]) {
+		if (ixp_sessions[sid]->ixp_ctx_id != -1) {
+			ixCryptoAccCtxUnregister(ixp_sessions[sid]->ixp_ctx_id);
+			ixp_sessions[sid]->ixp_ctx_id = -1;
+		}
+		kfree(ixp_sessions[sid]);
+	}
+	ixp_sessions[sid] = NULL;
+	if (ixp_blocked) {
+		ixp_blocked = 0;
+		crypto_unblock(ixp_id, CRYPTO_SYMQ);
+	}
+	return 0;
+}
+
+
+/*
+ * callback for when hash processing is complete
+ */
+
+static void
+ixp_hash_perform_cb(
+	UINT32 hash_key_id,
+	IX_MBUF *bufp,
+	IxCryptoAccStatus status)
+{
+	struct ixp_q *q;
+
+	dprintk("%s(%u, %p, 0x%x)\n", __FUNCTION__, hash_key_id, bufp, status);
+
+	if (bufp == NULL) {
+		printk("ixp: NULL buf in %s\n", __FUNCTION__);
+		return;
+	}
+
+	q = IX_MBUF_PRIV(bufp);
+	if (q == NULL) {
+		printk("ixp: NULL priv in %s\n", __FUNCTION__);
+		return;
+	}
+
+	if (status == IX_CRYPTO_ACC_STATUS_SUCCESS) {
+		/* On success, need to copy hash back into original client buffer */
+		memcpy(q->ixp_hash_dest, q->ixp_hash_src,
+				(q->ixp_q_data->ixp_auth_alg == CRYPTO_SHA1) ?
+					SHA1_HASH_LEN : MD5_HASH_LEN);
+	}
+	else {
+		printk("ixp: hash perform failed status=%d\n", status);
+		q->ixp_q_crp->crp_etype = EINVAL;
+	}
+
+	/* Free internal buffer used for hashing */
+	kfree(IX_MBUF_MDATA(&q->ixp_q_mbuf));
+
+	crypto_done(q->ixp_q_crp);
+	kmem_cache_free(qcache, q);
+}
+
+/*
+ * setup a request and perform it
+ */
+static void
+ixp_q_process(struct ixp_q *q)
+{
+	IxCryptoAccStatus status;
+	struct ixp_data *ixp = q->ixp_q_data;
+	int auth_off = 0;
+	int auth_len = 0;
+	int crypt_off = 0;
+	int crypt_len = 0;
+	int icv_off = 0;
+	char *crypt_func;
+
+	dprintk("%s(%p)\n", __FUNCTION__, q);
+
+	if (q->ixp_q_ccrd) {
+		if (q->ixp_q_ccrd->crd_flags & CRD_F_IV_EXPLICIT) {
+			q->ixp_q_iv = q->ixp_q_ccrd->crd_iv;
+		} else {
+			q->ixp_q_iv = q->ixp_q_iv_data;
+			crypto_copydata(q->ixp_q_crp->crp_flags, q->ixp_q_crp->crp_buf,
+					q->ixp_q_ccrd->crd_inject,
+					ixp->ixp_ctx.cipherCtx.cipherInitialVectorLen,
+					(caddr_t) q->ixp_q_iv);
+		}
+
+		if (q->ixp_q_acrd) {
+			auth_off = q->ixp_q_acrd->crd_skip;
+			auth_len = q->ixp_q_acrd->crd_len;
+			icv_off  = q->ixp_q_acrd->crd_inject;
+		}
+
+		crypt_off = q->ixp_q_ccrd->crd_skip;
+		crypt_len = q->ixp_q_ccrd->crd_len;
+	} else { /* if (q->ixp_q_acrd) */
+		auth_off = q->ixp_q_acrd->crd_skip;
+		auth_len = q->ixp_q_acrd->crd_len;
+		icv_off  = q->ixp_q_acrd->crd_inject;
+	}
+
+	if (q->ixp_q_crp->crp_flags & CRYPTO_F_SKBUF) {
+		struct sk_buff *skb = (struct sk_buff *) q->ixp_q_crp->crp_buf;
+		if (skb_shinfo(skb)->nr_frags) {
+			/*
+			 * DAVIDM fix this limitation one day by using
+			 * a buffer pool and chaining,  it is not currently
+			 * needed for current user/kernel space acceleration
+			 */
+			printk("ixp: Cannot handle fragmented skb's yet !\n");
+			q->ixp_q_crp->crp_etype = ENOENT;
+			goto done;
+		}
+		IX_MBUF_MLEN(&q->ixp_q_mbuf) =
+				IX_MBUF_PKT_LEN(&q->ixp_q_mbuf) =  skb->len;
+		IX_MBUF_MDATA(&q->ixp_q_mbuf) = skb->data;
+	} else if (q->ixp_q_crp->crp_flags & CRYPTO_F_IOV) {
+		struct uio *uiop = (struct uio *) q->ixp_q_crp->crp_buf;
+		if (uiop->uio_iovcnt != 1) {
+			/*
+			 * DAVIDM fix this limitation one day by using
+			 * a buffer pool and chaining,  it is not currently
+			 * needed for current user/kernel space acceleration
+			 */
+			printk("ixp: Cannot handle more than 1 iovec yet !\n");
+			q->ixp_q_crp->crp_etype = ENOENT;
+			goto done;
+		}
+		IX_MBUF_MLEN(&q->ixp_q_mbuf) =
+				IX_MBUF_PKT_LEN(&q->ixp_q_mbuf) = uiop->uio_iov[0].iov_len;
+		IX_MBUF_MDATA(&q->ixp_q_mbuf) = uiop->uio_iov[0].iov_base;
+	} else /* contig buffer */ {
+		IX_MBUF_MLEN(&q->ixp_q_mbuf)  =
+				IX_MBUF_PKT_LEN(&q->ixp_q_mbuf) = q->ixp_q_crp->crp_ilen;
+		IX_MBUF_MDATA(&q->ixp_q_mbuf) = q->ixp_q_crp->crp_buf;
+	}
+
+	IX_MBUF_PRIV(&q->ixp_q_mbuf) = q;
+
+	if (ixp->ixp_auth_alg == CRYPTO_SHA1 || ixp->ixp_auth_alg == CRYPTO_MD5) {
+		/*
+		 * For SHA1 and MD5 hash, need to create an internal buffer that is big
+		 * enough to hold the original data + the appropriate padding for the
+		 * hash algorithm.
+		 */
+		UINT8 *tbuf = NULL;
+
+		IX_MBUF_MLEN(&q->ixp_q_mbuf) = IX_MBUF_PKT_LEN(&q->ixp_q_mbuf) =
+			((IX_MBUF_MLEN(&q->ixp_q_mbuf) * 8) + 72 + 511) / 8;
+		tbuf = kmalloc(IX_MBUF_MLEN(&q->ixp_q_mbuf), SLAB_ATOMIC);
+		
+		if (IX_MBUF_MDATA(&q->ixp_q_mbuf) == NULL) {
+			printk("ixp: kmalloc(%u, SLAB_ATOMIC) failed\n",
+					IX_MBUF_MLEN(&q->ixp_q_mbuf));
+			q->ixp_q_crp->crp_etype = ENOMEM;
+			goto done;
+		}
+		memcpy(tbuf, &(IX_MBUF_MDATA(&q->ixp_q_mbuf))[auth_off], auth_len);
+
+		/* Set location in client buffer to copy hash into */
+		q->ixp_hash_dest =
+			&(IX_MBUF_MDATA(&q->ixp_q_mbuf))[auth_off + auth_len];
+
+		IX_MBUF_MDATA(&q->ixp_q_mbuf) = tbuf;
+
+		/* Set location in internal buffer for where hash starts */
+		q->ixp_hash_src = &(IX_MBUF_MDATA(&q->ixp_q_mbuf))[auth_len];
+
+		crypt_func = "ixCryptoAccHashPerform";
+		status = ixCryptoAccHashPerform(ixp->ixp_ctx.authCtx.authAlgo,
+				&q->ixp_q_mbuf, ixp_hash_perform_cb, 0, auth_len, auth_len,
+				&ixp->ixp_hash_key_id);
+	}
+	else {
+		crypt_func = "ixCryptoAccAuthCryptPerform";
+		status = ixCryptoAccAuthCryptPerform(ixp->ixp_ctx_id, &q->ixp_q_mbuf,
+			NULL, auth_off, auth_len, crypt_off, crypt_len, icv_off,
+			q->ixp_q_iv);
+	}
+
+	if (IX_CRYPTO_ACC_STATUS_SUCCESS == status)
+		return;
+
+	if (IX_CRYPTO_ACC_STATUS_QUEUE_FULL == status) {
+		q->ixp_q_crp->crp_etype = ENOMEM;
+		goto done;
+	}
+
+	printk("ixp: %s failed %u\n", crypt_func, status);
+	q->ixp_q_crp->crp_etype = EINVAL;
+
+done:
+	crypto_done(q->ixp_q_crp);
+	kmem_cache_free(qcache, q);
+}
+
+
+/*
+ * because we cannot process the Q from the Register callback
+ * we do it here on a task Q.
+ */
+
+static void
+ixp_process_pending(void *arg)
+{
+	struct ixp_data *ixp = arg;
+	struct ixp_q *q = NULL;
+
+	dprintk("%s(%p)\n", __FUNCTION__, arg);
+
+	if (!ixp)
+		return;
+
+	while (!list_empty(&ixp->ixp_q)) {
+		q = list_entry(ixp->ixp_q.next, struct ixp_q, ixp_q_list);
+		list_del(&q->ixp_q_list);
+		ixp_q_process(q);
+	}
+}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
+static void
+ixp_process_pending_wq(struct work_struct *work)
+{
+	struct ixp_data *ixp = container_of(work, struct ixp_data, ixp_pending_work);
+	ixp_process_pending(ixp);
+}
+#endif
+
+/*
+ * callback for when context registration is complete
+ */
+
+static void
+ixp_register_cb(UINT32 ctx_id, IX_MBUF *bufp, IxCryptoAccStatus status)
+{
+	int i;
+	struct ixp_data *ixp;
+	struct ixp_q *q;
+
+	dprintk("%s(%d, %p, %d)\n", __FUNCTION__, ctx_id, bufp, status);
+
+	/*
+	 * free any buffer passed in to this routine
+	 */
+	if (bufp) {
+		IX_MBUF_MLEN(bufp) = IX_MBUF_PKT_LEN(bufp) = 0;
+		kfree(IX_MBUF_MDATA(bufp));
+		IX_MBUF_MDATA(bufp) = NULL;
+	}
+
+	for (i = 0; i < ixp_sesnum; i++) {
+		ixp = ixp_sessions[i];
+		if (ixp && ixp->ixp_ctx_id == ctx_id)
+			break;
+	}
+	if (i >= ixp_sesnum) {
+		printk("ixp: invalid context id %d\n", ctx_id);
+		return;
+	}
+
+	if (IX_CRYPTO_ACC_STATUS_WAIT == status) {
+		/* this is normal to free the first of two buffers */
+		dprintk("ixp: register not finished yet.\n");
+		return;
+	}
+
+	if (IX_CRYPTO_ACC_STATUS_SUCCESS != status) {
+		printk("ixp: register failed 0x%x\n", status);
+		while (!list_empty(&ixp->ixp_q)) {
+			q = list_entry(ixp->ixp_q.next, struct ixp_q, ixp_q_list);
+			list_del(&q->ixp_q_list);
+			q->ixp_q_crp->crp_etype = EINVAL;
+			crypto_done(q->ixp_q_crp);
+			kmem_cache_free(qcache, q);
+		}
+		return;
+	}
+
+	/*
+	 * we are now registered,  we cannot start processing the Q here
+	 * or we get strange errors with AES (DES/3DES seem to be ok).
+	 */
+	ixp->ixp_registered = 1;
+	schedule_work(&ixp->ixp_pending_work);
+}
+
+
+/*
+ * callback for when data processing is complete
+ */
+
+static void
+ixp_perform_cb(
+	UINT32 ctx_id,
+	IX_MBUF *sbufp,
+	IX_MBUF *dbufp,
+	IxCryptoAccStatus status)
+{
+	struct ixp_q *q;
+
+	dprintk("%s(%d, %p, %p, 0x%x)\n", __FUNCTION__, ctx_id, sbufp,
+			dbufp, status);
+
+	if (sbufp == NULL) {
+		printk("ixp: NULL sbuf in ixp_perform_cb\n");
+		return;
+	}
+
+	q = IX_MBUF_PRIV(sbufp);
+	if (q == NULL) {
+		printk("ixp: NULL priv in ixp_perform_cb\n");
+		return;
+	}
+
+	if (status != IX_CRYPTO_ACC_STATUS_SUCCESS) {
+		printk("ixp: perform failed status=%d\n", status);
+		q->ixp_q_crp->crp_etype = EINVAL;
+	}
+
+	crypto_done(q->ixp_q_crp);
+	kmem_cache_free(qcache, q);
+}
+
+
+/*
+ * registration is not callable at IRQ time,  so we defer
+ * to a task queue,  this routines completes the registration for us
+ * when the task queue runs
+ *
+ * Unfortunately this means we cannot tell OCF that the driver is blocked,
+ * we do that on the next request.
+ */
+
+static void
+ixp_registration(void *arg)
+{
+	struct ixp_data *ixp = arg;
+	struct ixp_q *q = NULL;
+	IX_MBUF *pri = NULL, *sec = NULL;
+	int status = IX_CRYPTO_ACC_STATUS_SUCCESS;
+
+	if (!ixp) {
+		printk("ixp: ixp_registration with no arg\n");
+		return;
+	}
+
+	if (ixp->ixp_ctx_id != -1) {
+		ixCryptoAccCtxUnregister(ixp->ixp_ctx_id);
+		ixp->ixp_ctx_id = -1;
+	}
+
+	if (list_empty(&ixp->ixp_q)) {
+		printk("ixp: ixp_registration with no Q\n");
+		return;
+	}
+
+	/*
+	 * setup the primary and secondary buffers
+	 */
+	q = list_entry(ixp->ixp_q.next, struct ixp_q, ixp_q_list);
+	if (q->ixp_q_acrd) {
+		pri = &ixp->ixp_pri_mbuf;
+		sec = &ixp->ixp_sec_mbuf;
+		IX_MBUF_MLEN(pri)  = IX_MBUF_PKT_LEN(pri) = 128;
+		IX_MBUF_MDATA(pri) = (unsigned char *) kmalloc(128, SLAB_ATOMIC);
+		IX_MBUF_MLEN(sec)  = IX_MBUF_PKT_LEN(sec) = 128;
+		IX_MBUF_MDATA(sec) = (unsigned char *) kmalloc(128, SLAB_ATOMIC);
+	}
+
+	/* Only need to register if a crypt op or HMAC op */
+	if (!(ixp->ixp_auth_alg == CRYPTO_SHA1 ||
+				ixp->ixp_auth_alg == CRYPTO_MD5)) {
+		status = ixCryptoAccCtxRegister(
+					&ixp->ixp_ctx,
+					pri, sec,
+					ixp_register_cb,
+					ixp_perform_cb,
+					&ixp->ixp_ctx_id);
+	}
+	else {
+		/* Otherwise we start processing pending q */
+		schedule_work(&ixp->ixp_pending_work);
+	}
+
+	if (IX_CRYPTO_ACC_STATUS_SUCCESS == status)
+		return;
+
+	if (IX_CRYPTO_ACC_STATUS_EXCEED_MAX_TUNNELS == status) {
+		printk("ixp: ixCryptoAccCtxRegister failed (out of tunnels)\n");
+		ixp_blocked = 1;
+		/* perhaps we should return EGAIN on queued ops ? */
+		return;
+	}
+
+	printk("ixp: ixCryptoAccCtxRegister failed %d\n", status);
+	ixp->ixp_ctx_id = -1;
+
+	/*
+	 * everything waiting is toasted
+	 */
+	while (!list_empty(&ixp->ixp_q)) {
+		q = list_entry(ixp->ixp_q.next, struct ixp_q, ixp_q_list);
+		list_del(&q->ixp_q_list);
+		q->ixp_q_crp->crp_etype = ENOENT;
+		crypto_done(q->ixp_q_crp);
+		kmem_cache_free(qcache, q);
+	}
+}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
+static void
+ixp_registration_wq(struct work_struct *work)
+{
+	struct ixp_data *ixp = container_of(work, struct ixp_data,
+								ixp_registration_work);
+	ixp_registration(ixp);
+}
+#endif
+
+/*
+ * Process a request.
+ */
+static int
+ixp_process(device_t dev, struct cryptop *crp, int hint)
+{
+	struct ixp_data *ixp;
+	unsigned int lid;
+	struct ixp_q *q = NULL;
+	int status;
+
+	dprintk("%s()\n", __FUNCTION__);
+
+	/* Sanity check */
+	if (crp == NULL) {
+		dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+		return EINVAL;
+	}
+
+	crp->crp_etype = 0;
+
+	if (ixp_blocked)
+		return ERESTART;
+
+	if (crp->crp_desc == NULL || crp->crp_buf == NULL) {
+		dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+		crp->crp_etype = EINVAL;
+		goto done;
+	}
+
+	/*
+	 * find the session we are using
+	 */
+
+	lid = crp->crp_sid & 0xffffffff;
+	if (lid >= ixp_sesnum || lid == 0 || ixp_sessions == NULL ||
+			ixp_sessions[lid] == NULL) {
+		crp->crp_etype = ENOENT;
+		dprintk("%s,%d: ENOENT\n", __FILE__, __LINE__);
+		goto done;
+	}
+	ixp = ixp_sessions[lid];
+
+	/*
+	 * setup a new request ready for queuing
+	 */
+	q = kmem_cache_alloc(qcache, SLAB_ATOMIC);
+	if (q == NULL) {
+		dprintk("%s,%d: ENOMEM\n", __FILE__, __LINE__);
+		crp->crp_etype = ENOMEM;
+		goto done;
+	}
+	/*
+	 * save some cycles by only zeroing the important bits
+	 */
+	memset(&q->ixp_q_mbuf, 0, sizeof(q->ixp_q_mbuf));
+	q->ixp_q_ccrd = NULL;
+	q->ixp_q_acrd = NULL;
+	q->ixp_q_crp = crp;
+	q->ixp_q_data = ixp;
+
+	/*
+	 * point the cipher and auth descriptors appropriately
+	 * check that we have something to do
+	 */
+	if (crp->crp_desc->crd_alg == ixp->ixp_cipher_alg)
+		q->ixp_q_ccrd = crp->crp_desc;
+	else if (crp->crp_desc->crd_alg == ixp->ixp_auth_alg)
+		q->ixp_q_acrd = crp->crp_desc;
+	else {
+		crp->crp_etype = ENOENT;
+		dprintk("%s,%d: bad desc match: ENOENT\n", __FILE__, __LINE__);
+		goto done;
+	}
+	if (crp->crp_desc->crd_next) {
+		if (crp->crp_desc->crd_next->crd_alg == ixp->ixp_cipher_alg)
+			q->ixp_q_ccrd = crp->crp_desc->crd_next;
+		else if (crp->crp_desc->crd_next->crd_alg == ixp->ixp_auth_alg)
+			q->ixp_q_acrd = crp->crp_desc->crd_next;
+		else {
+			crp->crp_etype = ENOENT;
+			dprintk("%s,%d: bad desc match: ENOENT\n", __FILE__, __LINE__);
+			goto done;
+		}
+	}
+
+	/*
+	 * If there is a direction change for this context then we mark it as
+	 * unregistered and re-register is for the new direction.  This is not
+	 * a very expensive operation and currently only tends to happen when
+	 * user-space application are doing benchmarks
+	 *
+	 * DM - we should be checking for pending requests before unregistering.
+	 */
+	if (q->ixp_q_ccrd && ixp->ixp_registered &&
+			ixp->ixp_crd_flags != (q->ixp_q_ccrd->crd_flags & CRD_F_ENCRYPT)) {
+		dprintk("%s - detected direction change on session\n", __FUNCTION__);
+		ixp->ixp_registered = 0;
+	}
+
+	/*
+	 * if we are registered,  call straight into the perform code
+	 */
+	if (ixp->ixp_registered) {
+		ixp_q_process(q);
+		return 0;
+	}
+
+	/*
+	 * the only part of the context not set in newsession is the direction
+	 * dependent parts
+	 */
+	if (q->ixp_q_ccrd) {
+		ixp->ixp_crd_flags = (q->ixp_q_ccrd->crd_flags & CRD_F_ENCRYPT);
+		if (q->ixp_q_ccrd->crd_flags & CRD_F_ENCRYPT) {
+			ixp->ixp_ctx.operation = q->ixp_q_acrd ?
+					IX_CRYPTO_ACC_OP_ENCRYPT_AUTH : IX_CRYPTO_ACC_OP_ENCRYPT;
+		} else {
+			ixp->ixp_ctx.operation = q->ixp_q_acrd ?
+					IX_CRYPTO_ACC_OP_AUTH_DECRYPT : IX_CRYPTO_ACC_OP_DECRYPT;
+		}
+	} else {
+		/* q->ixp_q_acrd must be set if we are here */
+		ixp->ixp_ctx.operation = IX_CRYPTO_ACC_OP_AUTH_CALC;
+	}
+
+	status = list_empty(&ixp->ixp_q);
+	list_add_tail(&q->ixp_q_list, &ixp->ixp_q);
+	if (status)
+		schedule_work(&ixp->ixp_registration_work);
+	return 0;
+
+done:
+	if (q)
+		kmem_cache_free(qcache, q);
+	crypto_done(crp);
+	return 0;
+}
+
+
+#ifdef __ixp46X
+/*
+ * key processing support for the ixp465
+ */
+
+
+/*
+ * copy a BN (LE) into a buffer (BE) an fill out the op appropriately
+ * assume zeroed and only copy bits that are significant
+ */
+
+static int
+ixp_copy_ibuf(struct crparam *p, IxCryptoAccPkeEauOperand *op, UINT32 *buf)
+{
+	unsigned char *src = (unsigned char *) p->crp_p;
+	unsigned char *dst;
+	int len, bits = p->crp_nbits;
+
+	dprintk("%s()\n", __FUNCTION__);
+
+	if (bits > MAX_IOP_SIZE * sizeof(UINT32) * 8) {
+		dprintk("%s - ibuf too big (%d > %d)\n", __FUNCTION__,
+				bits, MAX_IOP_SIZE * sizeof(UINT32) * 8);
+		return -1;
+	}
+
+	len = (bits + 31) / 32; /* the number UINT32's needed */
+
+	dst = (unsigned char *) &buf[len];
+	dst--;
+
+	while (bits > 0) {
+		*dst-- = *src++;
+		bits -= 8;
+	}
+
+#if 0 /* no need to zero remaining bits as it is done during request alloc */
+	while (dst > (unsigned char *) buf)
+		*dst-- = '\0';
+#endif
+
+	op->pData = buf;
+	op->dataLen = len;
+	return 0;
+}
+
+/*
+ * copy out the result,  be as forgiving as we can about small output buffers
+ */
+
+static int
+ixp_copy_obuf(struct crparam *p, IxCryptoAccPkeEauOpResult *op, UINT32 *buf)
+{
+	unsigned char *dst = (unsigned char *) p->crp_p;
+	unsigned char *src = (unsigned char *) buf;
+	int len, z, bits = p->crp_nbits;
+
+	dprintk("%s()\n", __FUNCTION__);
+
+	len = op->dataLen * sizeof(UINT32);
+
+	/* skip leading zeroes to be small buffer friendly */
+	z = 0;
+	while (z < len && src[z] == '\0')
+		z++;
+
+	src += len;
+	src--;
+	len -= z;
+
+	while (len > 0 && bits > 0) {
+		*dst++ = *src--;
+		len--;
+		bits -= 8;
+	}
+
+	while (bits > 0) {
+		*dst++ = '\0';
+		bits -= 8;
+	}
+
+	if (len > 0) {
+		dprintk("%s - obuf is %d (z=%d, ob=%d) bytes too small\n",
+				__FUNCTION__, len, z, p->crp_nbits / 8);
+		return -1;
+	}
+
+	return 0;
+}
+
+
+/*
+ * the parameter offsets for exp_mod
+ */
+
+#define IXP_PARAM_BASE 0
+#define IXP_PARAM_EXP  1
+#define IXP_PARAM_MOD  2
+#define IXP_PARAM_RES  3
+
+/*
+ * key processing complete callback,  is also used to start processing
+ * by passing a NULL for pResult
+ */
+
+static void
+ixp_kperform_cb(
+	IxCryptoAccPkeEauOperation operation,
+	IxCryptoAccPkeEauOpResult *pResult,
+	BOOL carryOrBorrow,
+	IxCryptoAccStatus status)
+{
+	struct ixp_pkq *q, *tmp;
+	unsigned long flags;
+
+	dprintk("%s(0x%x, %p, %d, 0x%x)\n", __FUNCTION__, operation, pResult,
+			carryOrBorrow, status);
+
+	/* handle a completed request */
+	if (pResult) {
+		if (ixp_pk_cur && &ixp_pk_cur->pkq_result == pResult) {
+			q = ixp_pk_cur;
+			if (status != IX_CRYPTO_ACC_STATUS_SUCCESS) {
+				dprintk("%s() - op failed 0x%x\n", __FUNCTION__, status);
+				q->pkq_krp->krp_status = ERANGE; /* could do better */
+			} else {
+				/* copy out the result */
+				if (ixp_copy_obuf(&q->pkq_krp->krp_param[IXP_PARAM_RES],
+						&q->pkq_result, q->pkq_obuf))
+					q->pkq_krp->krp_status = ERANGE;
+			}
+			crypto_kdone(q->pkq_krp);
+			kfree(q);
+			ixp_pk_cur = NULL;
+		} else
+			printk("%s - callback with invalid result pointer\n", __FUNCTION__);
+	}
+
+	spin_lock_irqsave(&ixp_pkq_lock, flags);
+	if (ixp_pk_cur || list_empty(&ixp_pkq)) {
+		spin_unlock_irqrestore(&ixp_pkq_lock, flags);
+		return;
+	}
+
+	list_for_each_entry_safe(q, tmp, &ixp_pkq, pkq_list) {
+
+		list_del(&q->pkq_list);
+		ixp_pk_cur = q;
+
+		spin_unlock_irqrestore(&ixp_pkq_lock, flags);
+
+		status = ixCryptoAccPkeEauPerform(
+				IX_CRYPTO_ACC_OP_EAU_MOD_EXP,
+				&q->pkq_op,
+				ixp_kperform_cb,
+				&q->pkq_result);
+	
+		if (status == IX_CRYPTO_ACC_STATUS_SUCCESS) {
+			dprintk("%s() - ixCryptoAccPkeEauPerform SUCCESS\n", __FUNCTION__);
+			return; /* callback will return here for callback */
+		} else if (status == IX_CRYPTO_ACC_STATUS_RETRY) {
+			printk("%s() - ixCryptoAccPkeEauPerform RETRY\n", __FUNCTION__);
+		} else {
+			printk("%s() - ixCryptoAccPkeEauPerform failed %d\n",
+					__FUNCTION__, status);
+		}
+		q->pkq_krp->krp_status = ERANGE; /* could do better */
+		crypto_kdone(q->pkq_krp);
+		kfree(q);
+		spin_lock_irqsave(&ixp_pkq_lock, flags);
+	}
+	spin_unlock_irqrestore(&ixp_pkq_lock, flags);
+}
+
+
+static int
+ixp_kprocess(device_t dev, struct cryptkop *krp, int hint)
+{
+	struct ixp_pkq *q;
+	int rc = 0;
+	unsigned long flags;
+
+	dprintk("%s l1=%d l2=%d l3=%d l4=%d\n", __FUNCTION__,
+			krp->krp_param[IXP_PARAM_BASE].crp_nbits,
+			krp->krp_param[IXP_PARAM_EXP].crp_nbits,
+			krp->krp_param[IXP_PARAM_MOD].crp_nbits,
+			krp->krp_param[IXP_PARAM_RES].crp_nbits);
+
+
+	if (krp->krp_op != CRK_MOD_EXP) {
+		krp->krp_status = EOPNOTSUPP;
+		goto err;
+	}
+
+	q = (struct ixp_pkq *) kmalloc(sizeof(*q), GFP_KERNEL);
+	if (q == NULL) {
+		krp->krp_status = ENOMEM;
+		goto err;
+	}
+
+	/*
+	 * The PKE engine does not appear to zero the output buffer
+	 * appropriately, so we need to do it all here.
+	 */
+	memset(q, 0, sizeof(*q));
+
+	q->pkq_krp = krp;
+	INIT_LIST_HEAD(&q->pkq_list);
+
+	if (ixp_copy_ibuf(&krp->krp_param[IXP_PARAM_BASE], &q->pkq_op.modExpOpr.M,
+			q->pkq_ibuf0))
+		rc = 1;
+	if (!rc && ixp_copy_ibuf(&krp->krp_param[IXP_PARAM_EXP],
+				&q->pkq_op.modExpOpr.e, q->pkq_ibuf1))
+		rc = 2;
+	if (!rc && ixp_copy_ibuf(&krp->krp_param[IXP_PARAM_MOD],
+				&q->pkq_op.modExpOpr.N, q->pkq_ibuf2))
+		rc = 3;
+
+	if (rc) {
+		kfree(q);
+		krp->krp_status = ERANGE;
+		goto err;
+	}
+
+	q->pkq_result.pData           = q->pkq_obuf;
+	q->pkq_result.dataLen         =
+			(krp->krp_param[IXP_PARAM_RES].crp_nbits + 31) / 32;
+
+	spin_lock_irqsave(&ixp_pkq_lock, flags);
+	list_add_tail(&q->pkq_list, &ixp_pkq);
+	spin_unlock_irqrestore(&ixp_pkq_lock, flags);
+
+	if (!ixp_pk_cur)
+		ixp_kperform_cb(0, NULL, 0, 0);
+	return (0);
+
+err:
+	crypto_kdone(krp);
+	return (0);
+}
+
+
+
+#ifdef CONFIG_OCF_RANDOMHARVEST
+/*
+ * We run the random number generator output through SHA so that it
+ * is FIPS compliant.
+ */
+
+static volatile int sha_done = 0;
+static unsigned char sha_digest[20];
+
+static void
+ixp_hash_cb(UINT8 *digest, IxCryptoAccStatus status)
+{
+	dprintk("%s(%p, %d)\n", __FUNCTION__, digest, status);
+	if (sha_digest != digest)
+		printk("digest error\n");
+	if (IX_CRYPTO_ACC_STATUS_SUCCESS == status)
+		sha_done = 1;
+	else
+		sha_done = -status;
+}
+
+static int
+ixp_read_random(void *arg, u_int32_t *buf, int maxwords)
+{
+	IxCryptoAccStatus status;
+	int i, n, rc;
+
+	dprintk("%s(%p, %d)\n", __FUNCTION__, buf, maxwords);
+	memset(buf, 0, maxwords * sizeof(*buf));
+	status = ixCryptoAccPkePseudoRandomNumberGet(maxwords, buf);
+	if (status != IX_CRYPTO_ACC_STATUS_SUCCESS) {
+		dprintk("%s: ixCryptoAccPkePseudoRandomNumberGet failed %d\n",
+				__FUNCTION__, status);
+		return 0;
+	}
+
+	/*
+	 * run the random data through SHA to make it look more random
+	 */
+
+	n = sizeof(sha_digest); /* process digest bytes at a time */
+
+	rc = 0;
+	for (i = 0; i < maxwords; i += n / sizeof(*buf)) {
+		if ((maxwords - i) * sizeof(*buf) < n)
+			n = (maxwords - i) * sizeof(*buf);
+		sha_done = 0;
+		status = ixCryptoAccPkeHashPerform(IX_CRYPTO_ACC_AUTH_SHA1,
+				(UINT8 *) &buf[i], n, ixp_hash_cb, sha_digest);
+		if (status != IX_CRYPTO_ACC_STATUS_SUCCESS) {
+			dprintk("ixCryptoAccPkeHashPerform failed %d\n", status);
+			return -EIO;
+		}
+		while (!sha_done)
+			schedule();
+		if (sha_done < 0) {
+			dprintk("ixCryptoAccPkeHashPerform failed CB %d\n", -sha_done);
+			return 0;
+		}
+		memcpy(&buf[i], sha_digest, n);
+		rc += n / sizeof(*buf);;
+	}
+
+	return rc;
+}
+#endif /* CONFIG_OCF_RANDOMHARVEST */
+
+#endif /* __ixp46X */
+
+
+
+/*
+ * our driver startup and shutdown routines
+ */
+
+static int
+ixp_init(void)
+{
+	dprintk("%s(%p)\n", __FUNCTION__, ixp_init);
+
+	if (ixp_init_crypto && ixCryptoAccInit() != IX_CRYPTO_ACC_STATUS_SUCCESS)
+		printk("ixCryptoAccInit failed, assuming already initialised!\n");
+
+	qcache = kmem_cache_create("ixp4xx_q", sizeof(struct ixp_q), 0,
+				SLAB_HWCACHE_ALIGN, NULL
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)
+				, NULL
+#endif
+				  );
+	if (!qcache) {
+		printk("failed to create Qcache\n");
+		return -ENOENT;
+	}
+
+	memset(&ixpdev, 0, sizeof(ixpdev));
+	softc_device_init(&ixpdev, "ixp4xx", 0, ixp_methods);
+
+	ixp_id = crypto_get_driverid(softc_get_device(&ixpdev),
+				CRYPTOCAP_F_HARDWARE);
+	if (ixp_id < 0)
+		panic("IXP/OCF crypto device cannot initialize!");
+
+#define	REGISTER(alg) \
+	crypto_register(ixp_id,alg,0,0)
+
+	REGISTER(CRYPTO_DES_CBC);
+	REGISTER(CRYPTO_3DES_CBC);
+	REGISTER(CRYPTO_RIJNDAEL128_CBC);
+#ifdef CONFIG_OCF_IXP4XX_SHA1_MD5
+	REGISTER(CRYPTO_MD5);
+	REGISTER(CRYPTO_SHA1);
+#endif
+	REGISTER(CRYPTO_MD5_HMAC);
+	REGISTER(CRYPTO_SHA1_HMAC);
+#undef REGISTER
+
+#ifdef __ixp46X
+	spin_lock_init(&ixp_pkq_lock);
+	/*
+	 * we do not enable the go fast options here as they can potentially
+	 * allow timing based attacks
+	 *
+	 * http://www.openssl.org/news/secadv_20030219.txt
+	 */
+	ixCryptoAccPkeEauExpConfig(0, 0);
+	crypto_kregister(ixp_id, CRK_MOD_EXP, 0);
+#ifdef CONFIG_OCF_RANDOMHARVEST
+	crypto_rregister(ixp_id, ixp_read_random, NULL);
+#endif
+#endif
+
+	return 0;
+}
+
+static void
+ixp_exit(void)
+{
+	dprintk("%s()\n", __FUNCTION__);
+	crypto_unregister_all(ixp_id);
+	ixp_id = -1;
+	kmem_cache_destroy(qcache);
+	qcache = NULL;
+}
+
+module_init(ixp_init);
+module_exit(ixp_exit);
+
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_AUTHOR("David McCullough <dmccullough@cyberguard.com>");
+MODULE_DESCRIPTION("ixp (OCF module for IXP4xx crypto)");
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/Makefile b/target/linux/generic/files/crypto/ocf/kirkwood/Makefile
new file mode 100644
index 0000000000..6dafd0048a
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/Makefile
@@ -0,0 +1,19 @@
+# for SGlinux builds
+-include $(ROOTDIR)/modules/.config
+
+obj-$(CONFIG_OCF_KIRKWOOD) += mv_cesa.o
+
+mv_cesa-y := cesa/mvCesa.o cesa/mvLru.o cesa/mvMD5.o cesa/mvSHA1.o cesa/AES/mvAesAlg.o cesa/AES/mvAesApi.o cesa/mvCesaDebug.o cesa_ocf_drv.o
+
+# Extra objects required by the CESA driver
+mv_cesa-y += mvHal/kw_family/ctrlEnv/mvCtrlEnvLib.o mvHal/kw_family/boardEnv/mvBoardEnvLib.o mvHal/mv_hal/twsi/mvTwsi.o mvHal/kw_family/ctrlEnv/sys/mvCpuIf.o mvHal/kw_family/ctrlEnv/sys/mvAhbToMbus.o mvHal/kw_family/ctrlEnv/sys/mvSysDram.o mvHal/linux_oss/mvOs.o mvHal/kw_family/ctrlEnv/mvCtrlEnvAddrDec.o mvHal/mv_hal/gpp/mvGpp.o mvHal/kw_family/ctrlEnv/sys/mvSysPex.o mvHal/mv_hal/pex/mvPex.o mvHal/kw_family/boardEnv/mvBoardEnvSpec.o mvHal/common/mvCommon.o mvHal/common/mvDebug.o mvHal/kw_family/ctrlEnv/sys/mvSysCesa.o
+
+ifdef src
+EXTRA_CFLAGS += -I$(src)/.. -I$(src)/cesa -I$(src)/mvHal -I$(src)/mvHal/common -I$(src)/mvHal/kw_family -I$(src)/mvHal/mv_hal -I$(src)/mvHal/linux_oss -I$(src)
+endif
+
+EXTRA_CFLAGS += -DMV_LINUX -DMV_CPU_LE -DMV_ARM -DMV_INCLUDE_CESA -DMV_INCLUDE_PEX -DMV_CACHE_COHERENCY=3
+ifdef TOPDIR
+-include $(TOPDIR)/Rules.make
+endif
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/cesa/AES/mvAes.h b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/AES/mvAes.h
new file mode 100644
index 0000000000..07a8601f82
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/AES/mvAes.h
@@ -0,0 +1,62 @@
+/* mvAes.h   v2.0   August '99
+ * Reference ANSI C code
+ */
+
+/*  AES Cipher header file for ANSI C Submissions
+      Lawrence E. Bassham III
+      Computer Security Division
+      National Institute of Standards and Technology
+
+      April 15, 1998
+
+    This sample is to assist implementers developing to the Cryptographic 
+API Profile for AES Candidate Algorithm Submissions.  Please consult this 
+document as a cross-reference.
+
+    ANY CHANGES, WHERE APPROPRIATE, TO INFORMATION PROVIDED IN THIS FILE
+MUST BE DOCUMENTED.  CHANGES ARE ONLY APPROPRIATE WHERE SPECIFIED WITH
+THE STRING "CHANGE POSSIBLE".  FUNCTION CALLS AND THEIR PARAMETERS CANNOT 
+BE CHANGED.  STRUCTURES CAN BE ALTERED TO ALLOW IMPLEMENTERS TO INCLUDE 
+IMPLEMENTATION SPECIFIC INFORMATION.
+*/
+
+/*  Includes:
+	Standard include files
+*/
+
+#include "mvOs.h"
+
+
+/*  Error Codes - CHANGE POSSIBLE: inclusion of additional error codes  */
+
+/*  Key direction is invalid, e.g., unknown value */
+#define     AES_BAD_KEY_DIR        -1  
+
+/*  Key material not of correct length */
+#define     AES_BAD_KEY_MAT        -2  
+
+/*  Key passed is not valid  */
+#define     AES_BAD_KEY_INSTANCE   -3  
+
+/*  Params struct passed to cipherInit invalid */
+#define     AES_BAD_CIPHER_MODE    -4  
+
+/*  Cipher in wrong state (e.g., not initialized) */
+#define     AES_BAD_CIPHER_STATE   -5  
+
+#define     AES_BAD_CIPHER_INSTANCE   -7 
+
+
+/*  Function protoypes  */
+/*  CHANGED: makeKey(): parameter blockLen added
+                        this parameter is absolutely necessary if you want to
+			setup the round keys in a variable block length setting 
+	     cipherInit(): parameter blockLen added (for obvious reasons)		
+ */
+int     aesMakeKey(MV_U8 *expandedKey, MV_U8 *keyMaterial, int keyLen, int blockLen);
+int     aesBlockEncrypt128(MV_U8 mode, MV_U8 *IV, MV_U8 *expandedKey, int  keyLen, 
+                    MV_U32 *plain, int numBlocks, MV_U32 *cipher);
+int     aesBlockDecrypt128(MV_U8 mode, MV_U8 *IV, MV_U8 *expandedKey, int  keyLen, 
+                    MV_U32 *plain, int numBlocks, MV_U32 *cipher);
+
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/cesa/AES/mvAesAlg.c b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/AES/mvAesAlg.c
new file mode 100644
index 0000000000..a65dc28932
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/AES/mvAesAlg.c
@@ -0,0 +1,317 @@
+/* rijndael-alg-ref.c   v2.0   August '99
+ * Reference ANSI C code
+ * authors: Paulo Barreto
+ *          Vincent Rijmen, K.U.Leuven
+ *
+ * This code is placed in the public domain.
+ */
+
+#include "mvOs.h"
+
+#include "mvAesAlg.h"
+
+#include "mvAesBoxes.dat"
+
+
+MV_U8 mul1(MV_U8 aa, MV_U8 bb);
+void KeyAddition(MV_U8 a[4][MAXBC], MV_U8 rk[4][MAXBC], MV_U8 BC);
+void ShiftRow128Enc(MV_U8 a[4][MAXBC]);
+void ShiftRow128Dec(MV_U8 a[4][MAXBC]);
+void Substitution(MV_U8 a[4][MAXBC], MV_U8 box[256]);
+void MixColumn(MV_U8 a[4][MAXBC], MV_U8 rk[4][MAXBC]);
+void InvMixColumn(MV_U8 a[4][MAXBC]);
+
+
+#define mul(aa, bb) (mask[bb] & Alogtable[aa + Logtable[bb]])
+                         
+MV_U8 mul1(MV_U8 aa, MV_U8 bb)
+{
+    return mask[bb] & Alogtable[aa + Logtable[bb]];
+}
+
+
+void KeyAddition(MV_U8 a[4][MAXBC], MV_U8 rk[4][MAXBC], MV_U8 BC) 
+{
+	/* Exor corresponding text input and round key input bytes
+	 */
+    ((MV_U32*)(&(a[0][0])))[0] ^= ((MV_U32*)(&(rk[0][0])))[0];
+    ((MV_U32*)(&(a[1][0])))[0] ^= ((MV_U32*)(&(rk[1][0])))[0];
+    ((MV_U32*)(&(a[2][0])))[0] ^= ((MV_U32*)(&(rk[2][0])))[0];
+    ((MV_U32*)(&(a[3][0])))[0] ^= ((MV_U32*)(&(rk[3][0])))[0];
+
+}
+
+void ShiftRow128Enc(MV_U8 a[4][MAXBC]) {
+	/* Row 0 remains unchanged
+	 * The other three rows are shifted a variable amount
+	 */
+	MV_U8 tmp[MAXBC];
+	
+    tmp[0] = a[1][1];
+    tmp[1] = a[1][2];
+    tmp[2] = a[1][3];
+    tmp[3] = a[1][0];
+
+    ((MV_U32*)(&(a[1][0])))[0] = ((MV_U32*)(&(tmp[0])))[0];
+     /*
+    a[1][0] = tmp[0];
+    a[1][1] = tmp[1];
+    a[1][2] = tmp[2];
+    a[1][3] = tmp[3];
+       */
+    tmp[0] = a[2][2];
+    tmp[1] = a[2][3];
+    tmp[2] = a[2][0];
+    tmp[3] = a[2][1];
+
+    ((MV_U32*)(&(a[2][0])))[0] = ((MV_U32*)(&(tmp[0])))[0];
+      /*
+    a[2][0] = tmp[0];
+    a[2][1] = tmp[1];
+    a[2][2] = tmp[2];
+    a[2][3] = tmp[3];
+    */
+    tmp[0] = a[3][3];
+    tmp[1] = a[3][0];
+    tmp[2] = a[3][1];
+    tmp[3] = a[3][2];
+
+    ((MV_U32*)(&(a[3][0])))[0] = ((MV_U32*)(&(tmp[0])))[0];
+    /*
+    a[3][0] = tmp[0];
+    a[3][1] = tmp[1];
+    a[3][2] = tmp[2];
+    a[3][3] = tmp[3];
+    */
+}  
+
+void ShiftRow128Dec(MV_U8 a[4][MAXBC]) {
+	/* Row 0 remains unchanged
+	 * The other three rows are shifted a variable amount
+	 */
+   	MV_U8 tmp[MAXBC];
+	
+    tmp[0] = a[1][3];
+    tmp[1] = a[1][0];
+    tmp[2] = a[1][1];
+    tmp[3] = a[1][2];
+
+    ((MV_U32*)(&(a[1][0])))[0] = ((MV_U32*)(&(tmp[0])))[0];
+    /*
+    a[1][0] = tmp[0];
+    a[1][1] = tmp[1];
+    a[1][2] = tmp[2];
+    a[1][3] = tmp[3];
+    */
+
+    tmp[0] = a[2][2];
+    tmp[1] = a[2][3];
+    tmp[2] = a[2][0];
+    tmp[3] = a[2][1];
+
+    ((MV_U32*)(&(a[2][0])))[0] = ((MV_U32*)(&(tmp[0])))[0];
+    /*
+    a[2][0] = tmp[0];
+    a[2][1] = tmp[1];
+    a[2][2] = tmp[2];
+    a[2][3] = tmp[3];
+    */
+
+    tmp[0] = a[3][1];
+    tmp[1] = a[3][2];
+    tmp[2] = a[3][3];
+    tmp[3] = a[3][0];
+
+    ((MV_U32*)(&(a[3][0])))[0] = ((MV_U32*)(&(tmp[0])))[0];
+    /*
+    a[3][0] = tmp[0];
+    a[3][1] = tmp[1];
+    a[3][2] = tmp[2];
+    a[3][3] = tmp[3];
+    */
+}  
+
+void Substitution(MV_U8 a[4][MAXBC], MV_U8 box[256]) {
+	/* Replace every byte of the input by the byte at that place
+	 * in the nonlinear S-box
+	 */
+	int i, j;
+	
+	for(i = 0; i < 4; i++)
+		for(j = 0; j < 4; j++) a[i][j] = box[a[i][j]] ;
+}
+   
+void MixColumn(MV_U8 a[4][MAXBC], MV_U8 rk[4][MAXBC]) {
+        /* Mix the four bytes of every column in a linear way
+	 */
+	MV_U8 b[4][MAXBC];
+	int i, j;
+		
+	for(j = 0; j < 4; j++){
+        b[0][j] = mul(25,a[0][j]) ^ mul(1,a[1][j]) ^ a[2][j] ^ a[3][j];
+        b[1][j] = mul(25,a[1][j]) ^ mul(1,a[2][j]) ^ a[3][j] ^ a[0][j];
+        b[2][j] = mul(25,a[2][j]) ^ mul(1,a[3][j]) ^ a[0][j] ^ a[1][j];
+        b[3][j] = mul(25,a[3][j]) ^ mul(1,a[0][j]) ^ a[1][j] ^ a[2][j];
+    }
+	for(i = 0; i < 4; i++)
+		/*for(j = 0; j < BC; j++) a[i][j] = b[i][j];*/
+        ((MV_U32*)(&(a[i][0])))[0] = ((MV_U32*)(&(b[i][0])))[0] ^ ((MV_U32*)(&(rk[i][0])))[0];;
+}
+
+void InvMixColumn(MV_U8 a[4][MAXBC]) {
+        /* Mix the four bytes of every column in a linear way
+	 * This is the opposite operation of Mixcolumn
+	 */
+	MV_U8 b[4][MAXBC];
+	int i, j;
+	
+	for(j = 0; j < 4; j++){
+        b[0][j] = mul(223,a[0][j]) ^ mul(104,a[1][j]) ^ mul(238,a[2][j]) ^ mul(199,a[3][j]);
+        b[1][j] = mul(223,a[1][j]) ^ mul(104,a[2][j]) ^ mul(238,a[3][j]) ^ mul(199,a[0][j]);
+        b[2][j] = mul(223,a[2][j]) ^ mul(104,a[3][j]) ^ mul(238,a[0][j]) ^ mul(199,a[1][j]);
+        b[3][j] = mul(223,a[3][j]) ^ mul(104,a[0][j]) ^ mul(238,a[1][j]) ^ mul(199,a[2][j]);
+    }
+	for(i = 0; i < 4; i++)
+		/*for(j = 0; j < BC; j++) a[i][j] = b[i][j];*/
+        ((MV_U32*)(&(a[i][0])))[0] = ((MV_U32*)(&(b[i][0])))[0];
+}
+
+int rijndaelKeySched (MV_U8 k[4][MAXKC], int keyBits, int blockBits, MV_U8 W[MAXROUNDS+1][4][MAXBC]) 
+{
+	/* Calculate the necessary round keys
+	 * The number of calculations depends on keyBits and blockBits
+	 */
+	int KC, BC, ROUNDS;
+	int i, j, t, rconpointer = 0;
+	MV_U8 tk[4][MAXKC];   
+
+	switch (keyBits) {
+	case 128: KC = 4; break;
+	case 192: KC = 6; break;
+	case 256: KC = 8; break;
+	default : return (-1);
+	}
+
+	switch (blockBits) {
+	case 128: BC = 4; break;
+	case 192: BC = 6; break;
+	case 256: BC = 8; break;
+	default : return (-2);
+	}
+
+	switch (keyBits >= blockBits ? keyBits : blockBits) {
+	case 128: ROUNDS = 10; break;
+	case 192: ROUNDS = 12; break;
+	case 256: ROUNDS = 14; break;
+	default : return (-3); /* this cannot happen */
+	}
+
+	
+	for(j = 0; j < KC; j++)
+		for(i = 0; i < 4; i++)
+			tk[i][j] = k[i][j];
+	t = 0;
+	/* copy values into round key array */
+	for(j = 0; (j < KC) && (t < (ROUNDS+1)*BC); j++, t++)
+		for(i = 0; i < 4; i++) W[t / BC][i][t % BC] = tk[i][j];
+		
+	while (t < (ROUNDS+1)*BC) { /* while not enough round key material calculated */
+		/* calculate new values */
+		for(i = 0; i < 4; i++)
+			tk[i][0] ^= S[tk[(i+1)%4][KC-1]];
+		tk[0][0] ^= rcon[rconpointer++];
+
+		if (KC != 8)
+			for(j = 1; j < KC; j++)
+				for(i = 0; i < 4; i++) tk[i][j] ^= tk[i][j-1];
+		else {
+			for(j = 1; j < KC/2; j++)
+				for(i = 0; i < 4; i++) tk[i][j] ^= tk[i][j-1];
+			for(i = 0; i < 4; i++) tk[i][KC/2] ^= S[tk[i][KC/2 - 1]];
+			for(j = KC/2 + 1; j < KC; j++)
+				for(i = 0; i < 4; i++) tk[i][j] ^= tk[i][j-1];
+	}
+	/* copy values into round key array */
+	for(j = 0; (j < KC) && (t < (ROUNDS+1)*BC); j++, t++)
+		for(i = 0; i < 4; i++) W[t / BC][i][t % BC] = tk[i][j];
+	}		
+
+	return 0;
+}
+      
+        
+
+int rijndaelEncrypt128(MV_U8 a[4][MAXBC], MV_U8 rk[MAXROUNDS+1][4][MAXBC], int rounds)
+{
+	/* Encryption of one block. 
+	 */
+	int r, BC, ROUNDS;
+
+    BC = 4;
+    ROUNDS = rounds;
+
+	/* begin with a key addition
+	 */
+
+	KeyAddition(a,rk[0],BC); 
+
+    /* ROUNDS-1 ordinary rounds
+	 */
+	for(r = 1; r < ROUNDS; r++) {
+		Substitution(a,S);
+		ShiftRow128Enc(a);
+		MixColumn(a, rk[r]);
+		/*KeyAddition(a,rk[r],BC);*/
+	}
+	
+	/* Last round is special: there is no MixColumn
+	 */
+	Substitution(a,S);
+	ShiftRow128Enc(a);
+	KeyAddition(a,rk[ROUNDS],BC);
+
+	return 0;
+}   
+
+
+int rijndaelDecrypt128(MV_U8 a[4][MAXBC], MV_U8 rk[MAXROUNDS+1][4][MAXBC], int rounds)
+{
+	int r, BC, ROUNDS;
+	
+    BC = 4;
+    ROUNDS = rounds;
+
+	/* To decrypt: apply the inverse operations of the encrypt routine,
+	 *             in opposite order
+	 * 
+	 * (KeyAddition is an involution: it 's equal to its inverse)
+	 * (the inverse of Substitution with table S is Substitution with the inverse table of S)
+	 * (the inverse of Shiftrow is Shiftrow over a suitable distance)
+	 */
+
+        /* First the special round:
+	 *   without InvMixColumn
+	 *   with extra KeyAddition
+	 */
+	KeyAddition(a,rk[ROUNDS],BC);
+    ShiftRow128Dec(a);               
+	Substitution(a,Si);
+	
+	/* ROUNDS-1 ordinary rounds
+	 */
+	for(r = ROUNDS-1; r > 0; r--) {
+		KeyAddition(a,rk[r],BC);
+		InvMixColumn(a);      
+		ShiftRow128Dec(a);               
+		Substitution(a,Si);
+
+	}
+	
+	/* End with the extra key addition
+	 */
+	
+	KeyAddition(a,rk[0],BC);    
+
+	return 0;
+}
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/cesa/AES/mvAesAlg.h b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/AES/mvAesAlg.h
new file mode 100644
index 0000000000..ec81e403fa
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/AES/mvAesAlg.h
@@ -0,0 +1,19 @@
+/* rijndael-alg-ref.h   v2.0   August '99
+ * Reference ANSI C code
+ * authors: Paulo Barreto
+ *          Vincent Rijmen, K.U.Leuven
+ */
+#ifndef __RIJNDAEL_ALG_H
+#define __RIJNDAEL_ALG_H
+
+#define MAXBC				(128/32)
+#define MAXKC				(256/32)
+#define MAXROUNDS			14
+
+
+int rijndaelKeySched (MV_U8 k[4][MAXKC], int keyBits, int blockBits, MV_U8 rk[MAXROUNDS+1][4][MAXBC]);
+
+int rijndaelEncrypt128(MV_U8 a[4][MAXBC], MV_U8 rk[MAXROUNDS+1][4][MAXBC], int rounds);
+int rijndaelDecrypt128(MV_U8 a[4][MAXBC], MV_U8 rk[MAXROUNDS+1][4][MAXBC], int rounds);
+
+#endif /* __RIJNDAEL_ALG_H */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/cesa/AES/mvAesApi.c b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/AES/mvAesApi.c
new file mode 100644
index 0000000000..b432dc6e66
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/AES/mvAesApi.c
@@ -0,0 +1,312 @@
+/* rijndael-api-ref.c   v2.1   April 2000
+ * Reference ANSI C code
+ * authors: v2.0 Paulo Barreto
+ *               Vincent Rijmen, K.U.Leuven
+ *          v2.1 Vincent Rijmen, K.U.Leuven
+ *
+ * This code is placed in the public domain.
+ */
+#include "mvOs.h"
+
+#include "mvAes.h"
+#include "mvAesAlg.h"
+
+
+/*  Defines:
+	Add any additional defines you need
+*/
+
+#define     MODE_ECB        1    /*  Are we ciphering in ECB mode?   */
+#define     MODE_CBC        2    /*  Are we ciphering in CBC mode?   */
+#define     MODE_CFB1       3    /*  Are we ciphering in 1-bit CFB mode? */
+
+
+int     aesMakeKey(MV_U8 *expandedKey, MV_U8 *keyMaterial, int keyLen, int blockLen)
+{
+    MV_U8   W[MAXROUNDS+1][4][MAXBC];
+	MV_U8   k[4][MAXKC];
+    MV_U8   j;
+	int     i, rounds, KC;
+	
+	if (expandedKey == NULL) 
+    {
+		return AES_BAD_KEY_INSTANCE;
+	}
+
+	if (!((keyLen == 128) || (keyLen == 192) || (keyLen == 256))) 
+    { 
+		return AES_BAD_KEY_MAT;
+	}
+
+	if (keyMaterial == NULL) 
+    {
+		return AES_BAD_KEY_MAT;
+	}
+
+	/* initialize key schedule: */ 
+ 	for(i=0; i<keyLen/8; i++) 
+    {
+		j = keyMaterial[i];
+		k[i % 4][i / 4] = j; 
+	}	
+	
+	rijndaelKeySched (k, keyLen, blockLen, W);
+#ifdef MV_AES_DEBUG
+    {
+        MV_U8*  pW = &W[0][0][0];
+        int     x;
+
+        mvOsPrintf("Expended Key: size = %d\n", sizeof(W));
+        for(i=0; i<sizeof(W); i++)
+        {
+            mvOsPrintf("%02x ", pW[i]);
+        }
+        for(i=0; i<MAXROUNDS+1; i++)
+        {
+            mvOsPrintf("\n Round #%02d: ", i);
+            for(x=0; x<MAXBC; x++)
+            {
+                mvOsPrintf("%02x%02x%02x%02x ", 
+                    W[i][0][x], W[i][1][x], W[i][2][x], W[i][3][x]);
+            }
+            mvOsPrintf("\n");
+        }
+    }
+#endif /* MV_AES_DEBUG */
+  	switch (keyLen) 
+    {
+	    case 128: 
+            rounds = 10;
+            KC = 4; 
+            break;
+	    case 192: 
+            rounds = 12;
+            KC = 6; 
+            break;
+	    case 256: 
+            rounds = 14;
+            KC = 8; 
+            break;
+	    default : 
+            return (-1);
+	}
+
+    for(i=0; i<MAXBC; i++)
+    {
+        for(j=0; j<4; j++)
+        {
+            expandedKey[i*4+j] = W[rounds][j][i];
+        }
+    }
+    for(; i<KC; i++)
+    {
+        for(j=0; j<4; j++)
+        {
+            expandedKey[i*4+j] = W[rounds-1][j][i+MAXBC-KC];
+        }
+    }
+
+	
+	return 0;
+}
+
+int     aesBlockEncrypt128(MV_U8 mode, MV_U8 *IV, MV_U8 *expandedKey, int  keyLen, 
+                        MV_U32 *plain, int numBlocks, MV_U32 *cipher)
+{
+	int     i, j, t;
+	MV_U8   block[4][MAXBC];
+    int     rounds;
+    char    *input, *outBuffer;
+
+    input = (char*)plain;
+    outBuffer = (char*)cipher;
+
+        /* check parameter consistency: */
+    if( (expandedKey == NULL) || ((keyLen != 128) && (keyLen != 192) && (keyLen != 256))) 
+    {
+        return AES_BAD_KEY_MAT;
+    }
+    if ((mode != MODE_ECB && mode != MODE_CBC))
+    {
+        return AES_BAD_CIPHER_STATE;
+    }
+
+	switch (keyLen) 
+    {
+	    case 128: rounds = 10; break;
+	    case 192: rounds = 12; break;
+	    case 256: rounds = 14; break;
+	    default : return (-3); /* this cannot happen */
+	}
+
+	
+	switch (mode) 
+    {
+	    case MODE_ECB: 
+		    for (i = 0; i < numBlocks; i++) 
+            {
+			    for (j = 0; j < 4; j++) 
+                {
+				    for(t = 0; t < 4; t++)
+				        /* parse input stream into rectangular array */
+					    block[t][j] = input[16*i+4*j+t] & 0xFF;
+			    }                           
+			    rijndaelEncrypt128(block, (MV_U8 (*)[4][MAXBC])expandedKey, rounds);
+			    for (j = 0; j < 4; j++) 
+                {           
+				    /* parse rectangular array into output ciphertext bytes */
+				    for(t = 0; t < 4; t++)
+                        outBuffer[16*i+4*j+t] = (MV_U8) block[t][j];
+
+			    }
+		    }
+		    break;
+		
+	    case MODE_CBC:
+		    for (j = 0; j < 4; j++) 
+            {
+			    for(t = 0; t < 4; t++)
+			    /* parse initial value into rectangular array */
+					block[t][j] = IV[t+4*j] & 0xFF;
+			}
+		    for (i = 0; i < numBlocks; i++) 
+            {
+			    for (j = 0; j < 4; j++) 
+                {
+				    for(t = 0; t < 4; t++)
+				        /* parse input stream into rectangular array and exor with 
+				        IV or the previous ciphertext */
+					    block[t][j] ^= input[16*i+4*j+t] & 0xFF;
+			    }
+			    rijndaelEncrypt128(block, (MV_U8 (*)[4][MAXBC])expandedKey, rounds);
+			    for (j = 0; j < 4; j++) 
+                {
+				    /* parse rectangular array into output ciphertext bytes */
+				    for(t = 0; t < 4; t++)
+					    outBuffer[16*i+4*j+t] = (MV_U8) block[t][j];
+			    }
+		    }
+		    break;
+	
+	    default: return AES_BAD_CIPHER_STATE;
+	}
+	
+	return 0;
+}
+
+int     aesBlockDecrypt128(MV_U8 mode, MV_U8 *IV, MV_U8 *expandedKey, int  keyLen, 
+                            MV_U32 *srcData, int numBlocks, MV_U32 *dstData)
+{
+	int     i, j, t;
+	MV_U8   block[4][MAXBC];
+    MV_U8   iv[4][MAXBC];    
+    int     rounds;
+    char    *input, *outBuffer;
+
+    input = (char*)srcData;
+    outBuffer = (char*)dstData;
+
+    if (expandedKey == NULL) 
+    {
+		return AES_BAD_KEY_MAT;
+	}
+
+    /* check parameter consistency: */
+    if (keyLen != 128 && keyLen != 192 && keyLen != 256)
+    {
+        return AES_BAD_KEY_MAT;
+    }
+    if ((mode != MODE_ECB && mode != MODE_CBC)) 
+    {
+        return AES_BAD_CIPHER_STATE;
+    }
+
+	switch (keyLen) 
+    {
+	    case 128: rounds = 10; break;
+	    case 192: rounds = 12; break;
+	    case 256: rounds = 14; break;
+	    default : return (-3); /* this cannot happen */
+	}
+
+	
+	switch (mode) 
+    {
+	    case MODE_ECB: 
+		    for (i = 0; i < numBlocks; i++) 
+            {
+			    for (j = 0; j < 4; j++) 
+                {
+				    for(t = 0; t < 4; t++)
+                    {
+				        /* parse input stream into rectangular array */
+					    block[t][j] = input[16*i+4*j+t] & 0xFF;
+                    }
+			    }
+			    rijndaelDecrypt128(block, (MV_U8 (*)[4][MAXBC])expandedKey, rounds);
+			    for (j = 0; j < 4; j++) 
+                {
+				    /* parse rectangular array into output ciphertext bytes */
+				    for(t = 0; t < 4; t++)
+					    outBuffer[16*i+4*j+t] = (MV_U8) block[t][j];
+			    }
+		    }
+		    break;
+		
+	    case MODE_CBC:
+		    /* first block */
+		    for (j = 0; j < 4; j++) 
+            {
+			    for(t = 0; t < 4; t++)
+                {
+			        /* parse input stream into rectangular array */
+				    block[t][j] = input[4*j+t] & 0xFF;
+                    iv[t][j] = block[t][j];
+                }
+		    }
+		    rijndaelDecrypt128(block, (MV_U8 (*)[4][MAXBC])expandedKey, rounds);
+		
+		    for (j = 0; j < 4; j++) 
+            {
+			    /* exor the IV and parse rectangular array into output ciphertext bytes */
+			    for(t = 0; t < 4; t++)
+                {
+				    outBuffer[4*j+t] = (MV_U8) (block[t][j] ^ IV[t+4*j]);
+                    IV[t+4*j] = iv[t][j];
+                }
+		    }
+		
+		    /* next blocks */
+		    for (i = 1; i < numBlocks; i++) 
+            {
+			    for (j = 0; j < 4; j++) 
+                {
+				    for(t = 0; t < 4; t++)
+                    {
+				        /* parse input stream into rectangular array */
+                        iv[t][j] = input[16*i+4*j+t] & 0xFF;
+					    block[t][j] = iv[t][j];
+                    }
+			    }
+			    rijndaelDecrypt128(block, (MV_U8 (*)[4][MAXBC])expandedKey, rounds);
+			
+			    for (j = 0; j < 4; j++) 
+                {
+				    /* exor previous ciphertext block and parse rectangular array 
+				       into output ciphertext bytes */
+				    for(t = 0; t < 4; t++)
+                    {
+					    outBuffer[16*i+4*j+t] = (MV_U8) (block[t][j] ^ IV[t+4*j]);
+                        IV[t+4*j] = iv[t][j];
+                    }
+			    }
+		    }
+		    break;
+	
+	    default: return AES_BAD_CIPHER_STATE;
+	}
+	
+	return 0;
+}
+
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvCesa.c b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvCesa.c
new file mode 100644
index 0000000000..17ab086f07
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvCesa.c
@@ -0,0 +1,3126 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED.  The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+        this list of conditions and the following disclaimer.
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    *   Neither the name of Marvell nor the names of its contributors may be
+        used to endorse or promote products derived from this software without
+        specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "cesa/mvCesa.h"
+
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#undef CESA_DEBUG
+
+
+/********** Global variables **********/
+
+/*  If request size is more than MV_CESA_MAX_BUF_SIZE the
+ *  request is processed as fragmented request.
+ */
+
+MV_CESA_STATS           cesaStats;
+
+MV_BUF_INFO             cesaSramSaBuf;
+short                   cesaLastSid = -1;
+MV_CESA_SA*             pCesaSAD = NULL;
+MV_U16                  cesaMaxSA = 0;
+
+MV_CESA_REQ*            pCesaReqFirst = NULL;
+MV_CESA_REQ*            pCesaReqLast = NULL;
+MV_CESA_REQ*            pCesaReqEmpty = NULL;
+MV_CESA_REQ*            pCesaReqProcess = NULL;
+int                     cesaQueueDepth = 0;
+int                     cesaReqResources = 0;
+
+MV_CESA_SRAM_MAP*       cesaSramVirtPtr = NULL;
+MV_U32                  cesaCryptEngBase = 0;
+void			*cesaOsHandle = NULL;
+#if (MV_CESA_VERSION >= 3)
+MV_U32			cesaChainLength = 0;
+int                     chainReqNum = 0;
+MV_U32			chainIndex = 0;
+MV_CESA_REQ*  		pNextActiveChain = 0;
+MV_CESA_REQ*		pEndCurrChain = 0;
+MV_BOOL			isFirstReq = MV_TRUE;
+#endif
+
+static INLINE MV_U8*  mvCesaSramAddrGet(void)
+{
+#ifdef MV_CESA_NO_SRAM
+    return (MV_U8*)cesaSramVirtPtr;
+#else
+    return (MV_U8*)cesaCryptEngBase;
+#endif /* MV_CESA_NO_SRAM */
+}
+
+static INLINE MV_ULONG    mvCesaSramVirtToPhys(void* pDev, MV_U8* pSramVirt)
+{
+#ifdef MV_CESA_NO_SRAM
+    return (MV_ULONG)mvOsIoVirtToPhy(NULL, pSramVirt);
+#else
+    return (MV_ULONG)pSramVirt;
+#endif /* MV_CESA_NO_SRAM */
+}
+
+/* Internal Function prototypes */
+
+static INLINE void      mvCesaSramDescrBuild(MV_U32 config, int frag,
+                                 int cryptoOffset, int ivOffset, int cryptoLength,
+                                 int macOffset, int digestOffset, int macLength, int macTotalLen,
+                                 MV_CESA_REQ *pCesaReq, MV_DMA_DESC* pDmaDesc);
+
+static INLINE void      mvCesaSramSaUpdate(short sid, MV_DMA_DESC *pDmaDesc);
+
+static INLINE int       mvCesaDmaCopyPrepare(MV_CESA_MBUF* pMbuf, MV_U8* pSramBuf, 
+                                MV_DMA_DESC* pDmaDesc, MV_BOOL isToMbuf,
+                                int offset, int copySize, MV_BOOL skipFlush);
+
+static void        mvCesaHmacIvGet(MV_CESA_MAC_MODE macMode, unsigned char key[], int keyLength,
+                                    unsigned char innerIV[], unsigned char outerIV[]);
+
+static MV_STATUS   mvCesaFragAuthComplete(MV_CESA_REQ* pReq, MV_CESA_SA* pSA,
+                                          int macDataSize);
+
+static MV_CESA_COMMAND*   mvCesaCtrModeInit(void);
+
+static MV_STATUS   mvCesaCtrModePrepare(MV_CESA_COMMAND *pCtrModeCmd, MV_CESA_COMMAND *pCmd);
+static MV_STATUS   mvCesaCtrModeComplete(MV_CESA_COMMAND *pOrgCmd, MV_CESA_COMMAND *pCmd);
+static void        mvCesaCtrModeFinish(MV_CESA_COMMAND *pCmd);
+
+static INLINE MV_STATUS mvCesaReqProcess(MV_CESA_REQ* pReq);
+static MV_STATUS   mvCesaFragReqProcess(MV_CESA_REQ* pReq, MV_U8 frag);
+
+static INLINE MV_STATUS mvCesaParamCheck(MV_CESA_SA* pSA, MV_CESA_COMMAND *pCmd, MV_U8* pFixOffset);
+static INLINE MV_STATUS mvCesaFragParamCheck(MV_CESA_SA* pSA, MV_CESA_COMMAND *pCmd);
+
+static INLINE void      mvCesaFragSizeFind(MV_CESA_SA* pSA, MV_CESA_REQ* pReq, 
+                               int cryptoOffset, int macOffset,
+                               int* pCopySize, int* pCryptoDataSize, int* pMacDataSize);
+static MV_STATUS        mvCesaMbufCacheUnmap(MV_CESA_MBUF* pMbuf, int offset, int size);
+
+
+/* Go to the next request in the request queue */
+static INLINE MV_CESA_REQ* MV_CESA_REQ_NEXT_PTR(MV_CESA_REQ* pReq)
+{
+    if(pReq == pCesaReqLast)
+        return pCesaReqFirst;
+
+    return pReq+1;
+}
+
+#if (MV_CESA_VERSION >= 3)
+/* Go to the previous request in the request queue */
+static INLINE MV_CESA_REQ* MV_CESA_REQ_PREV_PTR(MV_CESA_REQ* pReq)
+{
+    if(pReq == pCesaReqFirst)
+        return pCesaReqLast;
+
+    return pReq-1;
+}
+
+#endif
+
+
+static INLINE void mvCesaReqProcessStart(MV_CESA_REQ* pReq)
+{
+    int frag;
+
+#if (MV_CESA_VERSION >= 3)
+    pReq->state = MV_CESA_CHAIN;
+#else
+    pReq->state = MV_CESA_PROCESS;
+#endif
+    cesaStats.startCount++;
+
+    if(pReq->fragMode == MV_CESA_FRAG_NONE)
+    {
+        frag = 0;
+    }
+    else
+    {
+        frag = pReq->frags.nextFrag;
+        pReq->frags.nextFrag++;
+    }
+#if (MV_CESA_VERSION >= 2)
+    /* Enable TDMA engine */
+    MV_REG_WRITE(MV_CESA_TDMA_CURR_DESC_PTR_REG, 0);
+    MV_REG_WRITE(MV_CESA_TDMA_NEXT_DESC_PTR_REG, 
+            (MV_U32)mvCesaVirtToPhys(&pReq->dmaDescBuf, pReq->dma[frag].pDmaFirst));
+#else
+    /* Enable IDMA engine */
+    MV_REG_WRITE(IDMA_CURR_DESC_PTR_REG(0), 0);
+    MV_REG_WRITE(IDMA_NEXT_DESC_PTR_REG(0), 
+            (MV_U32)mvCesaVirtToPhys(&pReq->dmaDescBuf, pReq->dma[frag].pDmaFirst));
+#endif /* MV_CESA_VERSION >= 2 */
+
+#if defined(MV_BRIDGE_SYNC_REORDER) 
+    mvOsBridgeReorderWA();
+#endif
+
+    /* Start Accelerator */
+    MV_REG_WRITE(MV_CESA_CMD_REG, MV_CESA_CMD_CHAN_ENABLE_MASK);
+}
+
+
+/*******************************************************************************
+* mvCesaHalInit - Initialize the CESA driver
+*
+* DESCRIPTION:
+*       This function initialize the CESA driver.
+*       1) Session database
+*       2) Request queue
+*       4) DMA descriptor lists - one list per request. Each list
+*           has MV_CESA_MAX_DMA_DESC descriptors.
+*
+* INPUT:
+*       numOfSession    - maximum number of supported sessions
+*       queueDepth      - number of elements in the request queue.
+*       pSramBase       - virtual address of Sram
+*	osHandle	- A handle used by the OS to allocate memory for the 
+*			  module (Passed to the OS Services layer)
+*
+* RETURN:
+*       MV_OK           - Success
+*       MV_NO_RESOURCE  - Fail, can't allocate resources:
+*                         Session database, request queue,
+*                         DMA descriptors list, LRU cache database.
+*       MV_NOT_ALIGNED  - Sram base address is not 8 byte aligned.
+*
+*******************************************************************************/
+MV_STATUS mvCesaHalInit (int numOfSession, int queueDepth, char* pSramBase, MV_U32 cryptEngBase,
+			 void *osHandle)
+{
+    int     i, req;
+    MV_U32  descOffsetReg, configReg;
+    MV_CESA_SRAM_SA *pSramSA;
+
+
+    mvOsPrintf("mvCesaInit: sessions=%d, queue=%d, pSram=%p\n",
+                numOfSession, queueDepth, pSramBase);
+
+    cesaOsHandle = osHandle;
+    /* Create Session database */
+    pCesaSAD = mvOsMalloc(sizeof(MV_CESA_SA)*numOfSession);
+    if(pCesaSAD == NULL)
+    {
+        mvOsPrintf("mvCesaInit: Can't allocate %u bytes for %d SAs\n",
+                    sizeof(MV_CESA_SA)*numOfSession, numOfSession);
+        mvCesaFinish();
+        return MV_NO_RESOURCE;
+    }
+    memset(pCesaSAD, 0, sizeof(MV_CESA_SA)*numOfSession);
+    cesaMaxSA = numOfSession;
+
+    /* Allocate imag of sramSA in the DRAM */
+    cesaSramSaBuf.bufSize = sizeof(MV_CESA_SRAM_SA)*numOfSession + 
+                                    CPU_D_CACHE_LINE_SIZE;
+
+    cesaSramSaBuf.bufVirtPtr = mvOsIoCachedMalloc(osHandle,cesaSramSaBuf.bufSize,
+						  &cesaSramSaBuf.bufPhysAddr,
+						  &cesaSramSaBuf.memHandle);
+        
+    if(cesaSramSaBuf.bufVirtPtr == NULL)
+    {
+        mvOsPrintf("mvCesaInit: Can't allocate %d bytes for sramSA structures\n", 
+                    cesaSramSaBuf.bufSize);
+        mvCesaFinish();
+        return MV_NO_RESOURCE;
+    }
+    memset(cesaSramSaBuf.bufVirtPtr, 0, cesaSramSaBuf.bufSize); 
+    pSramSA = (MV_CESA_SRAM_SA*)MV_ALIGN_UP((MV_ULONG)cesaSramSaBuf.bufVirtPtr, 
+                                                       CPU_D_CACHE_LINE_SIZE);
+    for(i=0; i<numOfSession; i++)
+    {
+        pCesaSAD[i].pSramSA = &pSramSA[i];
+    }
+
+    /* Create request queue */
+    pCesaReqFirst = mvOsMalloc(sizeof(MV_CESA_REQ)*queueDepth);
+    if(pCesaReqFirst == NULL)
+    {
+        mvOsPrintf("mvCesaInit: Can't allocate %u bytes for %d requests\n",
+                    sizeof(MV_CESA_REQ)*queueDepth, queueDepth);
+        mvCesaFinish();
+        return MV_NO_RESOURCE;
+    }
+    memset(pCesaReqFirst, 0, sizeof(MV_CESA_REQ)*queueDepth);
+    pCesaReqEmpty = pCesaReqFirst;
+    pCesaReqLast = pCesaReqFirst + (queueDepth-1);
+    pCesaReqProcess = pCesaReqEmpty;
+    cesaQueueDepth = queueDepth;
+    cesaReqResources = queueDepth;
+#if (MV_CESA_VERSION >= 3)
+    cesaChainLength = MAX_CESA_CHAIN_LENGTH; 
+#endif
+    /* pSramBase must be 8 byte aligned */
+    if( MV_IS_NOT_ALIGN((MV_ULONG)pSramBase, 8) )
+    {
+        mvOsPrintf("mvCesaInit: pSramBase (%p) must be 8 byte aligned\n",
+                pSramBase);
+        mvCesaFinish();
+        return MV_NOT_ALIGNED;
+    }
+    cesaSramVirtPtr = (MV_CESA_SRAM_MAP*)pSramBase;
+    
+    cesaCryptEngBase = cryptEngBase;
+
+    /*memset(cesaSramVirtPtr, 0, sizeof(MV_CESA_SRAM_MAP));*/
+
+    /* Clear registers */
+    MV_REG_WRITE( MV_CESA_CFG_REG, 0);
+    MV_REG_WRITE( MV_CESA_ISR_CAUSE_REG, 0);
+    MV_REG_WRITE( MV_CESA_ISR_MASK_REG, 0);
+
+    /* Initialize DMA descriptor lists for all requests in Request queue */
+    descOffsetReg = configReg = 0;
+    for(req=0; req<queueDepth; req++)
+    {
+        int             frag;
+        MV_CESA_REQ*    pReq;
+        MV_DMA_DESC*    pDmaDesc;
+
+        pReq = &pCesaReqFirst[req];
+
+        pReq->cesaDescBuf.bufSize = sizeof(MV_CESA_DESC)*MV_CESA_MAX_REQ_FRAGS + 
+                                        CPU_D_CACHE_LINE_SIZE;
+
+	pReq->cesaDescBuf.bufVirtPtr = 
+		mvOsIoCachedMalloc(osHandle,pReq->cesaDescBuf.bufSize,
+				   &pReq->cesaDescBuf.bufPhysAddr,
+				   &pReq->cesaDescBuf.memHandle);
+
+        if(pReq->cesaDescBuf.bufVirtPtr == NULL)
+        {
+            mvOsPrintf("mvCesaInit: req=%d, Can't allocate %d bytes for CESA descriptors\n", 
+                        req, pReq->cesaDescBuf.bufSize);
+                mvCesaFinish();
+                return MV_NO_RESOURCE;
+            }
+        memset(pReq->cesaDescBuf.bufVirtPtr, 0, pReq->cesaDescBuf.bufSize); 
+        pReq->pCesaDesc = (MV_CESA_DESC*)MV_ALIGN_UP((MV_ULONG)pReq->cesaDescBuf.bufVirtPtr, 
+                                                                CPU_D_CACHE_LINE_SIZE);
+
+        pReq->dmaDescBuf.bufSize = sizeof(MV_DMA_DESC)*MV_CESA_MAX_DMA_DESC*MV_CESA_MAX_REQ_FRAGS + 
+                                    CPU_D_CACHE_LINE_SIZE;
+
+        pReq->dmaDescBuf.bufVirtPtr = 
+		mvOsIoCachedMalloc(osHandle,pReq->dmaDescBuf.bufSize,
+				   &pReq->dmaDescBuf.bufPhysAddr,
+				   &pReq->dmaDescBuf.memHandle);
+
+        if(pReq->dmaDescBuf.bufVirtPtr == NULL)
+        {
+            mvOsPrintf("mvCesaInit: req=%d, Can't allocate %d bytes for DMA descriptor list\n", 
+                        req, pReq->dmaDescBuf.bufSize);
+            mvCesaFinish();
+            return MV_NO_RESOURCE;
+        }
+        memset(pReq->dmaDescBuf.bufVirtPtr, 0, pReq->dmaDescBuf.bufSize); 
+        pDmaDesc = (MV_DMA_DESC*)MV_ALIGN_UP((MV_ULONG)pReq->dmaDescBuf.bufVirtPtr, 
+                                                       CPU_D_CACHE_LINE_SIZE);
+
+        for(frag=0; frag<MV_CESA_MAX_REQ_FRAGS; frag++)
+        {
+            MV_CESA_DMA*    pDma = &pReq->dma[frag];
+
+            pDma->pDmaFirst = pDmaDesc;
+            pDma->pDmaLast = NULL;
+            
+            for(i=0; i<MV_CESA_MAX_DMA_DESC-1; i++)
+            {
+                /* link all DMA descriptors together */
+                pDma->pDmaFirst[i].phyNextDescPtr = 
+                        MV_32BIT_LE(mvCesaVirtToPhys(&pReq->dmaDescBuf, &pDmaDesc[i+1]));
+            }
+            pDma->pDmaFirst[i].phyNextDescPtr = 0;
+            mvOsCacheFlush(NULL, &pDma->pDmaFirst[0], MV_CESA_MAX_DMA_DESC*sizeof(MV_DMA_DESC));        
+
+            pDmaDesc += MV_CESA_MAX_DMA_DESC;
+        }        
+    }
+    /*mvCesaCryptoIvSet(NULL, MV_CESA_MAX_IV_LENGTH);*/
+    descOffsetReg = (MV_U16)((MV_U8*)&cesaSramVirtPtr->desc - mvCesaSramAddrGet());
+    MV_REG_WRITE(MV_CESA_CHAN_DESC_OFFSET_REG, descOffsetReg);
+
+    configReg |= (MV_CESA_CFG_WAIT_DMA_MASK | MV_CESA_CFG_ACT_DMA_MASK);
+#if (MV_CESA_VERSION >= 3)
+    configReg |= MV_CESA_CFG_CHAIN_MODE_MASK;
+#endif
+
+#if (MV_CESA_VERSION >= 2)
+    /* Initialize TDMA engine */
+    MV_REG_WRITE(MV_CESA_TDMA_CTRL_REG, MV_CESA_TDMA_CTRL_VALUE);
+    MV_REG_WRITE(MV_CESA_TDMA_BYTE_COUNT_REG, 0);
+    MV_REG_WRITE(MV_CESA_TDMA_CURR_DESC_PTR_REG, 0);
+#else
+    /* Initialize IDMA #0 engine */
+    MV_REG_WRITE(IDMA_CTRL_LOW_REG(0), 0);
+    MV_REG_WRITE(IDMA_BYTE_COUNT_REG(0), 0);
+    MV_REG_WRITE(IDMA_CURR_DESC_PTR_REG(0), 0);
+    MV_REG_WRITE(IDMA_CTRL_HIGH_REG(0), ICCHR_ENDIAN_LITTLE
+#ifdef MV_CPU_LE
+      		| ICCHR_DESC_BYTE_SWAP_EN
+#endif
+		 );
+    /* Clear Cause Byte of IDMA channel to be used */
+    MV_REG_WRITE( IDMA_CAUSE_REG, ~ICICR_CAUSE_MASK_ALL(0));
+    MV_REG_WRITE(IDMA_CTRL_LOW_REG(0), MV_CESA_IDMA_CTRL_LOW_VALUE);
+#endif /* (MV_CESA_VERSION >= 2) */
+
+    /* Set CESA configuration registers */
+    MV_REG_WRITE( MV_CESA_CFG_REG, configReg);
+    mvCesaDebugStatsClear();
+
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvCesaFinish - Shutdown the CESA driver
+*
+* DESCRIPTION:
+*       This function shutdown the CESA driver and free all allocted resources.
+*
+* INPUT:    None
+*
+* RETURN:
+*       MV_OK   - Success
+*       Other   - Fail
+*
+*******************************************************************************/
+MV_STATUS   mvCesaFinish (void)
+{
+    int             req;
+    MV_CESA_REQ*    pReq;
+
+    mvOsPrintf("mvCesaFinish: \n");
+
+    cesaSramVirtPtr = NULL;
+
+    /* Free all resources: DMA list, etc. */
+    for(req=0; req<cesaQueueDepth; req++)
+    {
+    	pReq = &pCesaReqFirst[req];
+        if(pReq->dmaDescBuf.bufVirtPtr != NULL)
+        {
+        	mvOsIoCachedFree(cesaOsHandle,pReq->dmaDescBuf.bufSize,
+				 pReq->dmaDescBuf.bufPhysAddr,
+				 pReq->dmaDescBuf.bufVirtPtr,
+				 pReq->dmaDescBuf.memHandle);
+        }
+        if(pReq->cesaDescBuf.bufVirtPtr != NULL)
+        {
+                mvOsIoCachedFree(cesaOsHandle,pReq->cesaDescBuf.bufSize,
+				 pReq->cesaDescBuf.bufPhysAddr,
+				 pReq->cesaDescBuf.bufVirtPtr,
+				 pReq->cesaDescBuf.memHandle);
+        }
+    }
+#if (MV_CESA_VERSION < 2)
+    MV_REG_WRITE(IDMA_CTRL_LOW_REG(0), 0);
+#endif /* (MV_CESA_VERSION < 2) */
+
+    /* Free request queue */
+    if(pCesaReqFirst != NULL)
+    {
+        mvOsFree(pCesaReqFirst);
+        pCesaReqFirst = pCesaReqLast = NULL;
+        pCesaReqEmpty = pCesaReqProcess = NULL;
+        cesaQueueDepth = cesaReqResources = 0;
+    }
+    /* Free SA database */
+    if(pCesaSAD != NULL)
+    {
+        mvOsFree(pCesaSAD);
+        pCesaSAD = NULL;
+        cesaMaxSA = 0;
+    }
+    MV_REG_WRITE( MV_CESA_CFG_REG, 0);
+    MV_REG_WRITE( MV_CESA_ISR_CAUSE_REG, 0);
+    MV_REG_WRITE( MV_CESA_ISR_MASK_REG, 0);
+
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvCesaCryptoIvSet - Set IV value for Crypto algorithm working in CBC mode
+*
+* DESCRIPTION:
+*    This function set IV value using by Crypto algorithms in CBC mode.
+*   Each channel has its own IV value.
+*   This function gets IV value from the caller. If no IV value passed from
+*   the caller or only part of IV passed, the function will init the rest part
+*   of IV value (or the whole IV) by random value.
+*
+* INPUT:
+*       MV_U8*  pIV     - Pointer to IV value supplied by user. If pIV==NULL
+*                       the function will generate random IV value.
+*       int     ivSize  - size (in bytes) of IV provided by user. If ivSize is
+*                       smaller than maximum IV size, the function will complete
+*                       IV by random value.
+*
+* RETURN:
+*       MV_OK   - Success
+*       Other   - Fail
+*
+*******************************************************************************/
+MV_STATUS   mvCesaCryptoIvSet(MV_U8* pIV, int ivSize)
+{
+    MV_U8*  pSramIV;
+#if defined(MV646xx)
+    mvOsPrintf("mvCesaCryptoIvSet: ERR. shouldn't use this call on MV64660\n");
+#endif
+    pSramIV = cesaSramVirtPtr->cryptoIV;
+    if(ivSize > MV_CESA_MAX_IV_LENGTH)
+    {
+        mvOsPrintf("mvCesaCryptoIvSet: ivSize (%d) is too large\n", ivSize);
+        ivSize = MV_CESA_MAX_IV_LENGTH;
+    }
+    if(pIV != NULL)
+    {
+        memcpy(pSramIV, pIV, ivSize);
+        ivSize = MV_CESA_MAX_IV_LENGTH - ivSize;
+        pSramIV += ivSize;
+    }
+
+    while(ivSize > 0)
+    {
+        int size, mv_random = mvOsRand();
+
+        size = MV_MIN(ivSize, sizeof(mv_random));
+        memcpy(pSramIV, (void*)&mv_random, size);
+
+        pSramIV += size;
+        ivSize -= size;
+    }
+/*
+    mvOsCacheFlush(NULL, cesaSramVirtPtr->cryptoIV,
+                                MV_CESA_MAX_IV_LENGTH);
+    mvOsCacheInvalidate(NULL, cesaSramVirtPtr->cryptoIV,
+                              MV_CESA_MAX_IV_LENGTH);
+*/
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvCesaSessionOpen - Open new uni-directional crypto session
+*
+* DESCRIPTION:
+*       This function open new session.
+*
+* INPUT:
+*       MV_CESA_OPEN_SESSION *pSession - pointer to new session input parameters
+*
+* OUTPUT:
+*       short           *pSid  - session ID, should be used for all future
+*                                   requests over this session.
+*
+* RETURN:
+*       MV_OK           - Session opend successfully.
+*       MV_FULL         - All sessions are in use, no free place in
+*                       SA database.
+*       MV_BAD_PARAM    - One of session input parameters is invalid.
+*
+*******************************************************************************/
+MV_STATUS   mvCesaSessionOpen(MV_CESA_OPEN_SESSION *pSession, short* pSid)
+{
+    short       sid;
+    MV_U32      config = 0;
+    int         digestSize;
+
+    cesaStats.openedCount++;
+    
+    /* Find free entry in SAD */
+    for(sid=0; sid<cesaMaxSA; sid++)
+    {
+        if(pCesaSAD[sid].valid == 0)
+        {
+            break;
+        }
+    }
+    if(sid == cesaMaxSA)
+    {
+        mvOsPrintf("mvCesaSessionOpen: SA Database is FULL\n");
+        return MV_FULL;
+    }
+
+    /* Check Input parameters for Open session */
+    if (pSession->operation >= MV_CESA_MAX_OPERATION)
+    {
+        mvOsPrintf("mvCesaSessionOpen: Unexpected operation %d\n",
+                    pSession->operation);
+        return MV_BAD_PARAM;
+    }
+    config |= (pSession->operation << MV_CESA_OPERATION_OFFSET);
+
+    if( (pSession->direction != MV_CESA_DIR_ENCODE) &&
+        (pSession->direction != MV_CESA_DIR_DECODE) )
+    {
+        mvOsPrintf("mvCesaSessionOpen: Unexpected direction %d\n",
+                    pSession->direction);
+        return MV_BAD_PARAM;
+    }
+    config |= (pSession->direction << MV_CESA_DIRECTION_BIT);
+    /* Clear SA entry */
+    /* memset(&pCesaSAD[sid], 0, sizeof(pCesaSAD[sid])); */
+
+    /* Check AUTH parameters and update SA entry */
+    if(pSession->operation != MV_CESA_CRYPTO_ONLY)
+    {
+        /* For HMAC (MD5 and SHA1) - Maximum Key size is 64 bytes */
+        if( (pSession->macMode == MV_CESA_MAC_HMAC_MD5) ||
+            (pSession->macMode == MV_CESA_MAC_HMAC_SHA1) )
+        {
+            if(pSession->macKeyLength > MV_CESA_MAX_MAC_KEY_LENGTH)
+            {
+                mvOsPrintf("mvCesaSessionOpen: macKeyLength %d is too large\n",
+                            pSession->macKeyLength);
+                return MV_BAD_PARAM;
+            }
+            mvCesaHmacIvGet(pSession->macMode, pSession->macKey, pSession->macKeyLength,
+                            pCesaSAD[sid].pSramSA->macInnerIV, 
+                            pCesaSAD[sid].pSramSA->macOuterIV);
+            pCesaSAD[sid].macKeyLength = pSession->macKeyLength;
+        }
+        switch(pSession->macMode)
+        {
+            case MV_CESA_MAC_MD5:
+            case MV_CESA_MAC_HMAC_MD5:
+                digestSize = MV_CESA_MD5_DIGEST_SIZE;
+                break;
+
+            case MV_CESA_MAC_SHA1:
+            case MV_CESA_MAC_HMAC_SHA1:
+                digestSize = MV_CESA_SHA1_DIGEST_SIZE;
+                break;
+
+            default:
+                mvOsPrintf("mvCesaSessionOpen: Unexpected macMode %d\n",
+                            pSession->macMode);
+                return MV_BAD_PARAM;
+        }
+        config |= (pSession->macMode << MV_CESA_MAC_MODE_OFFSET);
+
+        /* Supported digest sizes: MD5 - 16 bytes (128 bits), */
+        /* SHA1 - 20 bytes (160 bits) or 12 bytes (96 bits) for both */
+        if( (pSession->digestSize != digestSize) && (pSession->digestSize != 12))
+        {
+            mvOsPrintf("mvCesaSessionOpen: Unexpected digest size %d\n",
+                        pSession->digestSize);
+            mvOsPrintf("\t Valid values [bytes]: MD5-16, SHA1-20, Both-12\n");
+            return MV_BAD_PARAM;
+        }
+        pCesaSAD[sid].digestSize = pSession->digestSize;
+
+        if(pCesaSAD[sid].digestSize == 12)
+        {
+            /* Set MV_CESA_MAC_DIGEST_SIZE_BIT if digest size is 96 bits */
+            config |= (MV_CESA_MAC_DIGEST_96B << MV_CESA_MAC_DIGEST_SIZE_BIT);
+        }
+    }
+
+    /* Check CRYPTO parameters and update SA entry */
+    if(pSession->operation != MV_CESA_MAC_ONLY)
+    {
+        switch(pSession->cryptoAlgorithm)
+        {
+            case MV_CESA_CRYPTO_DES:
+                pCesaSAD[sid].cryptoKeyLength = MV_CESA_DES_KEY_LENGTH;
+                pCesaSAD[sid].cryptoBlockSize = MV_CESA_DES_BLOCK_SIZE;
+                break;
+
+            case MV_CESA_CRYPTO_3DES:
+                pCesaSAD[sid].cryptoKeyLength = MV_CESA_3DES_KEY_LENGTH;
+                pCesaSAD[sid].cryptoBlockSize = MV_CESA_DES_BLOCK_SIZE;
+                /* Only EDE mode is supported */
+                config |= (MV_CESA_CRYPTO_3DES_EDE <<
+                            MV_CESA_CRYPTO_3DES_MODE_BIT);
+                break;
+
+            case MV_CESA_CRYPTO_AES:
+                switch(pSession->cryptoKeyLength)
+                {
+                    case 16:
+                        pCesaSAD[sid].cryptoKeyLength = MV_CESA_AES_128_KEY_LENGTH;
+                        config |= (MV_CESA_CRYPTO_AES_KEY_128 <<
+                                       MV_CESA_CRYPTO_AES_KEY_LEN_OFFSET);
+                        break;
+
+                    case 24:
+                        pCesaSAD[sid].cryptoKeyLength = MV_CESA_AES_192_KEY_LENGTH;
+                        config |= (MV_CESA_CRYPTO_AES_KEY_192 <<
+                                       MV_CESA_CRYPTO_AES_KEY_LEN_OFFSET);
+                        break;
+
+                    case 32:
+                    default:
+                        pCesaSAD[sid].cryptoKeyLength = MV_CESA_AES_256_KEY_LENGTH;
+                        config |= (MV_CESA_CRYPTO_AES_KEY_256 <<
+                                       MV_CESA_CRYPTO_AES_KEY_LEN_OFFSET);
+                        break;
+                }
+                pCesaSAD[sid].cryptoBlockSize = MV_CESA_AES_BLOCK_SIZE;
+                break;
+
+            default:
+                mvOsPrintf("mvCesaSessionOpen: Unexpected cryptoAlgorithm %d\n",
+                            pSession->cryptoAlgorithm);
+                return MV_BAD_PARAM;
+        }
+        config |= (pSession->cryptoAlgorithm << MV_CESA_CRYPTO_ALG_OFFSET);
+
+        if(pSession->cryptoKeyLength != pCesaSAD[sid].cryptoKeyLength)
+        {
+            mvOsPrintf("cesaSessionOpen: Wrong CryptoKeySize %d != %d\n",
+                        pSession->cryptoKeyLength, pCesaSAD[sid].cryptoKeyLength);
+            return MV_BAD_PARAM;
+        }
+        
+        /* Copy Crypto key */
+        if( (pSession->cryptoAlgorithm == MV_CESA_CRYPTO_AES) &&
+            (pSession->direction == MV_CESA_DIR_DECODE))
+        {
+            /* Crypto Key for AES decode is computed from original key material */
+            /* and depend on cryptoKeyLength (128/192/256 bits) */
+            aesMakeKey(pCesaSAD[sid].pSramSA->cryptoKey, pSession->cryptoKey, 
+                        pSession->cryptoKeyLength*8, MV_CESA_AES_BLOCK_SIZE*8);
+        }
+        else
+        {
+                /*panic("mvCesaSessionOpen2");*/
+                memcpy(pCesaSAD[sid].pSramSA->cryptoKey, pSession->cryptoKey, 
+                    pCesaSAD[sid].cryptoKeyLength);
+            
+        }
+        
+        switch(pSession->cryptoMode)
+        {
+            case MV_CESA_CRYPTO_ECB:
+                pCesaSAD[sid].cryptoIvSize = 0;
+                break;
+
+            case MV_CESA_CRYPTO_CBC:
+                pCesaSAD[sid].cryptoIvSize = pCesaSAD[sid].cryptoBlockSize;
+                break;
+
+            case MV_CESA_CRYPTO_CTR:
+                /* Supported only for AES algorithm */
+                if(pSession->cryptoAlgorithm != MV_CESA_CRYPTO_AES)
+                {
+                    mvOsPrintf("mvCesaSessionOpen: CRYPTO CTR mode supported for AES only\n");
+                    return MV_BAD_PARAM;
+                }
+                pCesaSAD[sid].cryptoIvSize = 0;
+                pCesaSAD[sid].ctrMode = 1;
+                /* Replace to ECB mode for HW */
+                pSession->cryptoMode = MV_CESA_CRYPTO_ECB;
+                break;
+
+            default:
+                mvOsPrintf("mvCesaSessionOpen: Unexpected cryptoMode %d\n",
+                            pSession->cryptoMode);
+                return MV_BAD_PARAM;
+        }
+        
+        config |= (pSession->cryptoMode << MV_CESA_CRYPTO_MODE_BIT);
+    }
+    pCesaSAD[sid].config = config;
+    
+    mvOsCacheFlush(NULL, pCesaSAD[sid].pSramSA, sizeof(MV_CESA_SRAM_SA));
+    if(pSid != NULL)
+        *pSid = sid;
+
+    pCesaSAD[sid].valid = 1;
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvCesaSessionClose - Close active crypto session
+*
+* DESCRIPTION:
+*       This function closes existing session
+*
+* INPUT:
+*       short sid   - Unique identifier of the session to be closed
+*
+* RETURN:
+*       MV_OK        - Session closed successfully.
+*       MV_BAD_PARAM - Session identifier is out of valid range.
+*       MV_NOT_FOUND - There is no active session with such ID.
+*
+*******************************************************************************/
+MV_STATUS mvCesaSessionClose(short sid)
+{
+    cesaStats.closedCount++;
+
+    if(sid >= cesaMaxSA)
+    {
+        mvOsPrintf("CESA Error: sid (%d) is too big\n", sid);
+        return MV_BAD_PARAM;
+    }
+    if(pCesaSAD[sid].valid == 0)
+    {
+        mvOsPrintf("CESA Warning: Session (sid=%d) is invalid\n", sid);
+        return MV_NOT_FOUND;
+    }
+    if(cesaLastSid == sid)
+        cesaLastSid = -1;
+
+    pCesaSAD[sid].valid = 0;
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvCesaAction - Perform crypto operation
+*
+* DESCRIPTION:
+*       This function set new CESA request FIFO queue for further HW processing.
+*       The function checks request parameters before set new request to the queue.
+*       If one of the CESA channels is ready for processing the request will be
+*       passed to HW. When request processing is finished the CESA interrupt will
+*       be generated by HW. The caller should call mvCesaReadyGet() function to
+*       complete request processing and get result.
+*
+* INPUT:
+*       MV_CESA_COMMAND *pCmd   - pointer to new CESA request.
+*                               It includes pointers to Source and Destination
+*                               buffers, session identifier get from
+*                               mvCesaSessionOpen() function, pointer to caller
+*                               private data and all needed crypto parameters.
+*
+* RETURN:
+*       MV_OK             - request successfully added to request queue
+*                         and will be processed.
+*       MV_NO_MORE        - request successfully added to request queue and will
+*                         be processed, but request queue became Full and next
+*                         request will not be accepted.
+*       MV_NO_RESOURCE    - request queue is FULL and the request can not
+*                         be processed.
+*       MV_OUT_OF_CPU_MEM - memory allocation needed for request processing is
+*                         failed. Request can not be processed.
+*       MV_NOT_ALLOWED    - This mixed request (CRYPTO+MAC) can not be processed
+*                         as one request and should be splitted for two requests:
+*                         CRYPTO_ONLY and MAC_ONLY.
+*       MV_BAD_PARAM      - One of the request parameters is out of valid range.
+*                         The request can not be processed.
+*
+*******************************************************************************/
+MV_STATUS   mvCesaAction (MV_CESA_COMMAND *pCmd)
+{
+    MV_STATUS       status;
+    MV_CESA_REQ*    pReq = pCesaReqEmpty;
+    int             sid = pCmd->sessionId;
+    MV_CESA_SA*     pSA = &pCesaSAD[sid];
+#if (MV_CESA_VERSION >= 3)
+     MV_CESA_REQ*   pFromReq;
+     MV_CESA_REQ*   pToReq;
+#endif
+    cesaStats.reqCount++;
+
+    /* Check that the request queue is not FULL */
+    if(cesaReqResources == 0)
+        return MV_NO_RESOURCE;
+
+    if( (sid >= cesaMaxSA) || (!pSA->valid) )
+    {
+        mvOsPrintf("CESA Action Error: Session sid=%d is INVALID\n", sid);
+        return MV_BAD_PARAM;
+    }
+    pSA->count++;
+
+    if(pSA->ctrMode)
+    {
+        /* AES in CTR mode can't be mixed with Authentication */
+        if( (pSA->config & MV_CESA_OPERATION_MASK) !=
+            (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET) )
+        {
+            mvOsPrintf("mvCesaAction : CRYPTO CTR mode can't be mixed with AUTH\n");
+            return MV_NOT_ALLOWED;
+        }
+        /* All other request parameters should not be checked because key stream */
+        /* (not user data) processed by AES HW engine */
+        pReq->pOrgCmd = pCmd;
+        /* Allocate temporary pCmd structure for Key stream */
+        pCmd = mvCesaCtrModeInit();
+        if(pCmd == NULL)
+            return MV_OUT_OF_CPU_MEM;
+
+        /* Prepare Key stream */
+        mvCesaCtrModePrepare(pCmd, pReq->pOrgCmd);
+        pReq->fixOffset = 0;
+    }
+    else
+    {
+        /* Check request parameters and calculae fixOffset */
+        status = mvCesaParamCheck(pSA, pCmd, &pReq->fixOffset);
+        if(status != MV_OK)
+        {
+            return status;
+        }
+    }
+    pReq->pCmd = pCmd;
+
+    /* Check if the packet need fragmentation */
+    if(pCmd->pSrc->mbufSize <= sizeof(cesaSramVirtPtr->buf) )
+    {
+        /* request size is smaller than single buffer size */
+        pReq->fragMode = MV_CESA_FRAG_NONE;
+
+        /* Prepare NOT fragmented packets */
+        status = mvCesaReqProcess(pReq);
+        if(status != MV_OK)
+        {
+            mvOsPrintf("CesaReady: ReqProcess error: pReq=%p, status=0x%x\n",
+                        pReq, status);
+        }
+#if (MV_CESA_VERSION >= 3)
+	pReq->frags.numFrag = 1;
+#endif
+    }
+    else
+    {
+        MV_U8     frag = 0;
+
+        /* request size is larger than buffer size - needs fragmentation */
+
+        /* Check restrictions for processing fragmented packets */
+        status = mvCesaFragParamCheck(pSA, pCmd);
+        if(status != MV_OK)
+            return status;
+
+        pReq->fragMode = MV_CESA_FRAG_FIRST;
+        pReq->frags.nextFrag = 0;
+
+        /* Prepare Process Fragmented packets */
+        while(pReq->fragMode != MV_CESA_FRAG_LAST)
+        {
+            if(frag >= MV_CESA_MAX_REQ_FRAGS)
+            {
+                mvOsPrintf("mvCesaAction Error: Too large request frag=%d\n", frag);
+                return MV_OUT_OF_CPU_MEM;
+            }
+            status = mvCesaFragReqProcess(pReq, frag);
+            if(status == MV_OK) {
+#if (MV_CESA_VERSION >= 3)
+		if(frag) {
+			pReq->dma[frag-1].pDmaLast->phyNextDescPtr = 
+				MV_32BIT_LE(mvCesaVirtToPhys(&pReq->dmaDescBuf, pReq->dma[frag].pDmaFirst));
+			mvOsCacheFlush(NULL, pReq->dma[frag-1].pDmaLast, sizeof(MV_DMA_DESC));
+		}
+#endif
+                frag++;
+        }
+        }
+        pReq->frags.numFrag = frag;
+#if (MV_CESA_VERSION >= 3)
+	if(chainReqNum) {	
+		chainReqNum += pReq->frags.numFrag;
+		if(chainReqNum >= MAX_CESA_CHAIN_LENGTH)
+			chainReqNum = MAX_CESA_CHAIN_LENGTH;
+	}		
+#endif
+    }
+
+    pReq->state = MV_CESA_PENDING;
+
+    pCesaReqEmpty = MV_CESA_REQ_NEXT_PTR(pReq);
+    cesaReqResources -= 1;
+
+/* #ifdef CESA_DEBUG */
+    if( (cesaQueueDepth - cesaReqResources) > cesaStats.maxReqCount)
+        cesaStats.maxReqCount = (cesaQueueDepth - cesaReqResources);
+/* #endif CESA_DEBUG */
+
+    cesaLastSid = sid;
+
+#if (MV_CESA_VERSION >= 3)
+    /* Are we within chain bounderies and follows the first request ? */
+    if((chainReqNum > 0) && (chainReqNum < MAX_CESA_CHAIN_LENGTH)) {
+	if(chainIndex) {
+		pFromReq = MV_CESA_REQ_PREV_PTR(pReq); 
+		pToReq = pReq;
+		pReq->state = MV_CESA_CHAIN;
+		/* assume concatenating is possible */
+		pFromReq->dma[pFromReq->frags.numFrag-1].pDmaLast->phyNextDescPtr = 
+			MV_32BIT_LE(mvCesaVirtToPhys(&pToReq->dmaDescBuf, pToReq->dma[0].pDmaFirst));
+		mvOsCacheFlush(NULL, pFromReq->dma[pFromReq->frags.numFrag-1].pDmaLast, sizeof(MV_DMA_DESC));
+			
+		/* align active & next pointers */
+		if(pNextActiveChain->state != MV_CESA_PENDING)
+			pEndCurrChain = pNextActiveChain = MV_CESA_REQ_NEXT_PTR(pReq);
+	}
+	else { /* we have only one chain, start new one */
+		chainReqNum = 0;
+		chainIndex++;
+		/* align active & next pointers  */
+		if(pNextActiveChain->state != MV_CESA_PENDING)
+			pEndCurrChain = pNextActiveChain = pReq;
+	}
+    }
+    else {
+		/* In case we concatenate full chain */
+		if(chainReqNum == MAX_CESA_CHAIN_LENGTH) {
+			chainIndex++;
+			if(pNextActiveChain->state != MV_CESA_PENDING)
+				pEndCurrChain = pNextActiveChain = pReq;
+			chainReqNum = 0;
+		}
+		
+		pReq = pCesaReqProcess;
+		if(pReq->state == MV_CESA_PENDING) {
+			pNextActiveChain = pReq;
+			pEndCurrChain = MV_CESA_REQ_NEXT_PTR(pReq);
+        		/* Start Process new request */
+ 	      		mvCesaReqProcessStart(pReq);
+    		}
+    }
+
+    chainReqNum++;
+
+    if((chainIndex < MAX_CESA_CHAIN_LENGTH) && (chainReqNum > cesaStats.maxChainUsage))
+	cesaStats.maxChainUsage = chainReqNum;
+
+#else
+
+    /* Check status of CESA channels and process requests if possible */
+    pReq = pCesaReqProcess;
+    if(pReq->state == MV_CESA_PENDING)
+    {
+        /* Start Process new request */
+        mvCesaReqProcessStart(pReq);
+    }
+#endif
+    /* If request queue became FULL - return MV_NO_MORE */
+    if(cesaReqResources == 0)
+        return MV_NO_MORE;
+
+    return MV_OK;
+
+}
+
+/*******************************************************************************
+* mvCesaReadyGet - Get crypto request that processing is finished
+*
+* DESCRIPTION:
+*       This function complete request processing and return ready request to
+*       caller. To don't miss interrupts the caller must call this function
+*       while MV_OK or MV_TERMINATE values returned.
+*
+* INPUT:
+*   MV_U32          chanMap  - map of CESA channels finished thier job
+*                              accordingly with CESA Cause register.
+*   MV_CESA_RESULT* pResult  - pointer to structure contains information
+*                            about ready request. It includes pointer to
+*                            user private structure "pReqPrv", session identifier
+*                            for this request "sessionId" and return code.
+*                            Return code set to MV_FAIL if calculated digest value
+*                            on decode direction is different than digest value
+*                            in the packet.
+*
+* RETURN:
+*       MV_OK           - Success, ready request is returned.
+*       MV_NOT_READY    - Next request is not ready yet. New interrupt will
+*                       be generated for futher request processing.
+*       MV_EMPTY        - There is no more request for processing.
+*       MV_BUSY         - Fragmented request is not ready yet.
+*       MV_TERMINATE    - Call this function once more to complete processing
+*                       of fragmented request.
+*
+*******************************************************************************/
+MV_STATUS mvCesaReadyGet(MV_CESA_RESULT* pResult)
+{
+    MV_STATUS       status, readyStatus = MV_NOT_READY;
+    MV_U32          statusReg;
+    MV_CESA_REQ*    pReq;
+    MV_CESA_SA*     pSA;
+
+#if (MV_CESA_VERSION >= 3)
+    if(isFirstReq == MV_TRUE) {
+	if(chainIndex == 0)
+		chainReqNum = 0;
+	
+	isFirstReq = MV_FALSE;
+
+	if(pNextActiveChain->state == MV_CESA_PENDING) {
+		/* Start request Process */
+		mvCesaReqProcessStart(pNextActiveChain);
+		pEndCurrChain = pNextActiveChain;
+		if(chainIndex > 0)
+			chainIndex--;
+		/* Update pNextActiveChain to next chain head */
+		   while(pNextActiveChain->state == MV_CESA_CHAIN)
+			pNextActiveChain = MV_CESA_REQ_NEXT_PTR(pNextActiveChain);
+    	}    
+    }
+    
+    /* Check if there are more processed requests - can we remove pEndCurrChain ??? */
+    if(pCesaReqProcess == pEndCurrChain) {
+		isFirstReq = MV_TRUE;
+		pEndCurrChain = pNextActiveChain;
+#else
+    if(pCesaReqProcess->state != MV_CESA_PROCESS) {
+#endif
+        return MV_EMPTY;
+    }
+
+#ifdef CESA_DEBUG
+    statusReg = MV_REG_READ(MV_CESA_STATUS_REG);
+    if( statusReg & MV_CESA_STATUS_ACTIVE_MASK )
+    {
+        mvOsPrintf("mvCesaReadyGet: Not Ready, Status = 0x%x\n", statusReg);
+        cesaStats.notReadyCount++;
+        return MV_NOT_READY;
+    }
+#endif /* CESA_DEBUG */
+
+    cesaStats.readyCount++;
+
+    pReq = pCesaReqProcess;
+    pSA = &pCesaSAD[pReq->pCmd->sessionId];
+
+    pResult->retCode = MV_OK;
+    if(pReq->fragMode != MV_CESA_FRAG_NONE)
+    {
+        MV_U8*          pNewDigest;
+      int             frag;
+#if (MV_CESA_VERSION >= 3)
+      pReq->frags.nextFrag = 1;
+      while(pReq->frags.nextFrag <= pReq->frags.numFrag) {
+#endif
+	frag = (pReq->frags.nextFrag - 1);
+
+        /* Restore DMA descriptor list */
+        pReq->dma[frag].pDmaLast->phyNextDescPtr = 
+                MV_32BIT_LE(mvCesaVirtToPhys(&pReq->dmaDescBuf, &pReq->dma[frag].pDmaLast[1]));
+        pReq->dma[frag].pDmaLast = NULL;
+
+        /* Special processing for finished fragmented request */
+        if(pReq->frags.nextFrag >= pReq->frags.numFrag)
+        {
+            mvCesaMbufCacheUnmap(pReq->pCmd->pDst, 0, pReq->pCmd->pDst->mbufSize);
+
+            /* Fragmented packet is ready */
+            if( (pSA->config & MV_CESA_OPERATION_MASK) !=
+                (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET) )
+            {
+                int  macDataSize = pReq->pCmd->macLength - pReq->frags.macSize;
+
+                if(macDataSize != 0)
+                {
+                    /* Calculate all other blocks by SW */
+                    mvCesaFragAuthComplete(pReq, pSA, macDataSize);
+                }
+
+                /* Copy new digest from SRAM to the Destination buffer */
+                pNewDigest = cesaSramVirtPtr->buf + pReq->frags.newDigestOffset;
+                status = mvCesaCopyToMbuf(pNewDigest, pReq->pCmd->pDst,
+                                   pReq->pCmd->digestOffset, pSA->digestSize);
+
+                /* For decryption: Compare new digest value with original one */
+                if((pSA->config & MV_CESA_DIRECTION_MASK) ==
+                            (MV_CESA_DIR_DECODE << MV_CESA_DIRECTION_BIT))
+                {
+                    if( memcmp(pNewDigest, pReq->frags.orgDigest, pSA->digestSize) != 0)
+                    {
+/*
+                        mvOsPrintf("Digest error: chan=%d, newDigest=%p, orgDigest=%p, status = 0x%x\n",
+                            chan, pNewDigest, pReq->frags.orgDigest, MV_REG_READ(MV_CESA_STATUS_REG));
+*/
+                        /* Signiture verification is failed */
+                        pResult->retCode = MV_FAIL;
+                    }
+                }
+            }
+            readyStatus = MV_OK;
+        }
+#if (MV_CESA_VERSION >= 3)
+	pReq->frags.nextFrag++;
+      }
+#endif
+    }
+    else
+    {
+        mvCesaMbufCacheUnmap(pReq->pCmd->pDst, 0, pReq->pCmd->pDst->mbufSize);
+
+        /* Restore DMA descriptor list */
+        pReq->dma[0].pDmaLast->phyNextDescPtr = 
+                MV_32BIT_LE(mvCesaVirtToPhys(&pReq->dmaDescBuf, &pReq->dma[0].pDmaLast[1]));
+        pReq->dma[0].pDmaLast = NULL;
+        if( ((pSA->config & MV_CESA_OPERATION_MASK) !=
+                (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET) ) &&
+            ((pSA->config & MV_CESA_DIRECTION_MASK) ==
+                        (MV_CESA_DIR_DECODE << MV_CESA_DIRECTION_BIT)) )
+        {
+            /* For AUTH on decode : Check Digest result in Status register */
+            statusReg = MV_REG_READ(MV_CESA_STATUS_REG);
+            if(statusReg & MV_CESA_STATUS_DIGEST_ERR_MASK)
+            {
+/*
+                mvOsPrintf("Digest error: chan=%d, status = 0x%x\n",
+                        chan, statusReg);
+*/
+                /* Signiture verification is failed */
+                pResult->retCode = MV_FAIL;
+            }
+        }
+        readyStatus = MV_OK;
+    }
+
+    if(readyStatus == MV_OK)
+    {
+        /* If Request is ready - Prepare pResult structure */
+        pResult->pReqPrv = pReq->pCmd->pReqPrv;
+        pResult->sessionId = pReq->pCmd->sessionId;
+
+        pReq->state = MV_CESA_IDLE;
+        pCesaReqProcess = MV_CESA_REQ_NEXT_PTR(pReq);
+        cesaReqResources++;
+
+        if(pSA->ctrMode)
+        {
+            /* For AES CTR mode - complete processing and free allocated resources */
+            mvCesaCtrModeComplete(pReq->pOrgCmd, pReq->pCmd);
+            mvCesaCtrModeFinish(pReq->pCmd);
+            pReq->pOrgCmd = NULL;
+        }
+    }
+
+#if (MV_CESA_VERSION < 3)
+    if(pCesaReqProcess->state == MV_CESA_PROCESS)
+    {
+        /* Start request Process */
+        mvCesaReqProcessStart(pCesaReqProcess);
+        if(readyStatus == MV_NOT_READY)
+            readyStatus = MV_BUSY;
+    }
+    else if(pCesaReqProcess != pCesaReqEmpty)
+    {
+        /* Start process new request from the queue */
+        mvCesaReqProcessStart(pCesaReqProcess);
+    }
+#endif 
+    return readyStatus;
+}
+
+/***************** Functions to work with CESA_MBUF structure ******************/
+
+/*******************************************************************************
+* mvCesaMbufOffset - Locate offset in the Mbuf structure
+*
+* DESCRIPTION:
+*       This function locates offset inside Multi-Bufeer structure.
+*       It get fragment number and place in the fragment where the offset
+*       is located.
+*
+*
+* INPUT:
+*   MV_CESA_MBUF* pMbuf  - Pointer to multi-buffer structure
+*   int           offset - Offset from the beginning of the data presented by
+*                        the Mbuf structure.
+*
+* OUTPUT:
+*   int*        pBufOffset  - Offset from the beginning of the fragment where
+*                           the offset is located.
+*
+* RETURN:
+*       int - Number of fragment, where the offset is located\
+*
+*******************************************************************************/
+int     mvCesaMbufOffset(MV_CESA_MBUF* pMbuf, int offset, int* pBufOffset)
+{
+    int frag = 0;
+
+    while(offset > 0)
+    {
+        if(frag >= pMbuf->numFrags)
+        {
+            mvOsPrintf("mvCesaMbufOffset: Error: frag (%d) > numFrags (%d)\n",
+                    frag, pMbuf->numFrags);
+            return MV_INVALID;
+        }
+        if(offset < pMbuf->pFrags[frag].bufSize)
+        {
+            break;
+        }
+        offset -= pMbuf->pFrags[frag].bufSize;
+        frag++;
+    }
+    if(pBufOffset != NULL)
+        *pBufOffset = offset;
+
+    return frag;
+}
+
+/*******************************************************************************
+* mvCesaCopyFromMbuf - Copy data from the Mbuf structure to continuous buffer
+*
+* DESCRIPTION:
+*
+*
+* INPUT:
+*   MV_U8*          pDstBuf  - Pointer to continuous buffer, where data is
+*                              copied to.
+*   MV_CESA_MBUF*   pSrcMbuf - Pointer to multi-buffer structure where data is
+*                              copied from.
+*   int             offset   - Offset in the Mbuf structure where located first
+*                            byte of data should be copied.
+*   int             size     - Size of data should be copied
+*
+* RETURN:
+*       MV_OK           - Success, all data is copied successfully.
+*       MV_OUT_OF_RANGE - Failed, offset is out of Multi-buffer data range.
+*                         No data is copied.
+*       MV_EMPTY        - Multi-buffer structure has not enough data to copy
+*                       Data from the offset to end of Mbuf data is copied.
+*
+*******************************************************************************/
+MV_STATUS   mvCesaCopyFromMbuf(MV_U8* pDstBuf, MV_CESA_MBUF* pSrcMbuf,
+                               int offset, int size)
+{
+    int     frag, fragOffset, bufSize;
+    MV_U8*  pBuf;
+
+    if(size == 0)
+        return MV_OK;
+
+    frag = mvCesaMbufOffset(pSrcMbuf, offset, &fragOffset);
+    if(frag == MV_INVALID)
+    {
+        mvOsPrintf("CESA Mbuf Error: offset (%d) out of range\n", offset);
+        return MV_OUT_OF_RANGE;
+    }
+
+    bufSize = pSrcMbuf->pFrags[frag].bufSize - fragOffset;
+    pBuf = pSrcMbuf->pFrags[frag].bufVirtPtr + fragOffset;
+    while(MV_TRUE)
+    {
+        if(size <= bufSize)
+        {
+            memcpy(pDstBuf, pBuf, size);
+            return MV_OK;
+        }
+        memcpy(pDstBuf, pBuf, bufSize);
+        size -= bufSize;
+        frag++;
+        pDstBuf += bufSize;
+        if(frag >= pSrcMbuf->numFrags)
+            break;
+
+        bufSize = pSrcMbuf->pFrags[frag].bufSize;
+        pBuf = pSrcMbuf->pFrags[frag].bufVirtPtr;
+    }
+    mvOsPrintf("mvCesaCopyFromMbuf: Mbuf is EMPTY - %d bytes isn't copied\n",
+                size);
+    return MV_EMPTY;
+}
+
+/*******************************************************************************
+* mvCesaCopyToMbuf - Copy data from continuous buffer to the Mbuf structure
+*
+* DESCRIPTION:
+*
+*
+* INPUT:
+*   MV_U8*          pSrcBuf  - Pointer to continuous buffer, where data is
+*                              copied from.
+*   MV_CESA_MBUF*   pDstMbuf - Pointer to multi-buffer structure where data is
+*                              copied to.
+*   int             offset   - Offset in the Mbuf structure where located first
+*                            byte of data should be copied.
+*   int             size     - Size of data should be copied
+*
+* RETURN:
+*       MV_OK           - Success, all data is copied successfully.
+*       MV_OUT_OF_RANGE - Failed, offset is out of Multi-buffer data range.
+*                         No data is copied.
+*       MV_FULL         - Multi-buffer structure has not enough place to copy
+*                       all data. Data from the offset to end of Mbuf data
+*                       is copied.
+*
+*******************************************************************************/
+MV_STATUS   mvCesaCopyToMbuf(MV_U8* pSrcBuf, MV_CESA_MBUF* pDstMbuf,
+                               int offset, int size)
+{
+    int     frag, fragOffset, bufSize;
+    MV_U8*  pBuf;
+
+    if(size == 0)
+        return MV_OK;
+
+    frag = mvCesaMbufOffset(pDstMbuf, offset, &fragOffset);
+    if(frag == MV_INVALID)
+    {
+        mvOsPrintf("CESA Mbuf Error: offset (%d) out of range\n", offset);
+        return MV_OUT_OF_RANGE;
+    }
+
+    bufSize = pDstMbuf->pFrags[frag].bufSize - fragOffset;
+    pBuf = pDstMbuf->pFrags[frag].bufVirtPtr + fragOffset;
+    while(MV_TRUE)
+    {
+        if(size <= bufSize)
+        {
+            memcpy(pBuf, pSrcBuf, size);
+            return MV_OK;
+        }
+        memcpy(pBuf, pSrcBuf, bufSize);
+        size -= bufSize;
+        frag++;
+        pSrcBuf += bufSize;
+        if(frag >= pDstMbuf->numFrags)
+            break;
+
+        bufSize = pDstMbuf->pFrags[frag].bufSize;
+        pBuf = pDstMbuf->pFrags[frag].bufVirtPtr;
+    }
+    mvOsPrintf("mvCesaCopyToMbuf: Mbuf is FULL - %d bytes isn't copied\n",
+                size);
+    return MV_FULL;
+}
+
+/*******************************************************************************
+* mvCesaMbufCopy - Copy data from one Mbuf structure to the other Mbuf structure
+*
+* DESCRIPTION:
+*
+*
+* INPUT:
+*
+*   MV_CESA_MBUF*   pDstMbuf - Pointer to multi-buffer structure where data is
+*                              copied to.
+*   int      dstMbufOffset   - Offset in the dstMbuf structure where first byte
+*                            of data should be copied to.
+*   MV_CESA_MBUF*   pSrcMbuf - Pointer to multi-buffer structure where data is
+*                              copied from.
+*   int      srcMbufOffset   - Offset in the srcMbuf structure where first byte
+*                            of data should be copied from.
+*   int             size     - Size of data should be copied
+*
+* RETURN:
+*       MV_OK           - Success, all data is copied successfully.
+*       MV_OUT_OF_RANGE - Failed, srcMbufOffset or dstMbufOffset is out of
+*                       srcMbuf or dstMbuf structure correspondently.
+*                       No data is copied.
+*       MV_BAD_SIZE     - srcMbuf or dstMbuf structure is too small to copy
+*                       all data. Partial data is copied
+*
+*******************************************************************************/
+MV_STATUS   mvCesaMbufCopy(MV_CESA_MBUF* pMbufDst, int dstMbufOffset,
+                           MV_CESA_MBUF* pMbufSrc, int srcMbufOffset, int size)
+{
+    int     srcFrag, dstFrag, srcSize, dstSize, srcOffset, dstOffset;
+    int     copySize;
+    MV_U8   *pSrc, *pDst;
+
+    if(size == 0)
+        return MV_OK;
+
+    srcFrag = mvCesaMbufOffset(pMbufSrc, srcMbufOffset, &srcOffset);
+    if(srcFrag == MV_INVALID)
+    {
+        mvOsPrintf("CESA srcMbuf Error: offset (%d) out of range\n", srcMbufOffset);
+        return MV_OUT_OF_RANGE;
+    }
+    pSrc = pMbufSrc->pFrags[srcFrag].bufVirtPtr + srcOffset;
+    srcSize = pMbufSrc->pFrags[srcFrag].bufSize - srcOffset;
+
+    dstFrag = mvCesaMbufOffset(pMbufDst, dstMbufOffset, &dstOffset);
+    if(dstFrag == MV_INVALID)
+    {
+        mvOsPrintf("CESA dstMbuf Error: offset (%d) out of range\n", dstMbufOffset);
+        return MV_OUT_OF_RANGE;
+    }
+    pDst = pMbufDst->pFrags[dstFrag].bufVirtPtr + dstOffset;
+    dstSize = pMbufDst->pFrags[dstFrag].bufSize - dstOffset;
+
+    while(size > 0)
+    {
+        copySize = MV_MIN(srcSize, dstSize);
+        if(size <= copySize)
+        {
+            memcpy(pDst, pSrc, size);
+            return MV_OK;
+        }
+        memcpy(pDst, pSrc, copySize);
+        size -= copySize;
+        srcSize -= copySize;
+        dstSize -= copySize;
+
+        if(srcSize == 0)
+        {
+            srcFrag++;
+            if(srcFrag >= pMbufSrc->numFrags)
+                break;
+
+            pSrc = pMbufSrc->pFrags[srcFrag].bufVirtPtr;
+            srcSize = pMbufSrc->pFrags[srcFrag].bufSize;
+        }
+
+        if(dstSize == 0)
+        {
+            dstFrag++;
+            if(dstFrag >= pMbufDst->numFrags)
+                break;
+
+            pDst = pMbufDst->pFrags[dstFrag].bufVirtPtr;
+            dstSize = pMbufDst->pFrags[dstFrag].bufSize;
+        }
+    }
+    mvOsPrintf("mvCesaMbufCopy: BAD size - %d bytes isn't copied\n",
+                size);
+
+    return MV_BAD_SIZE;
+}
+
+static MV_STATUS   mvCesaMbufCacheUnmap(MV_CESA_MBUF* pMbuf, int offset, int size)
+{
+    int     frag, fragOffset, bufSize;
+    MV_U8*  pBuf;
+
+    if(size == 0)
+        return MV_OK;
+
+    frag = mvCesaMbufOffset(pMbuf, offset, &fragOffset);
+    if(frag == MV_INVALID)
+    {
+        mvOsPrintf("CESA Mbuf Error: offset (%d) out of range\n", offset);
+        return MV_OUT_OF_RANGE;
+    }
+
+    bufSize = pMbuf->pFrags[frag].bufSize - fragOffset;
+    pBuf = pMbuf->pFrags[frag].bufVirtPtr + fragOffset;
+    while(MV_TRUE)
+    {
+        if(size <= bufSize)
+        {
+            mvOsCacheUnmap(NULL, mvOsIoVirtToPhy(NULL, pBuf), size);
+            return MV_OK;
+        }
+
+        mvOsCacheUnmap(NULL, mvOsIoVirtToPhy(NULL, pBuf), bufSize);
+        size -= bufSize;
+        frag++;
+        if(frag >= pMbuf->numFrags)
+            break;
+
+        bufSize = pMbuf->pFrags[frag].bufSize;
+        pBuf = pMbuf->pFrags[frag].bufVirtPtr;
+    }
+    mvOsPrintf("%s: Mbuf is FULL - %d bytes isn't Unmapped\n",
+                __FUNCTION__, size);
+    return MV_FULL;
+}
+
+
+/*************************************** Local Functions ******************************/
+
+/*******************************************************************************
+* mvCesaFragReqProcess - Process fragmented request
+*
+* DESCRIPTION:
+*       This function processes a fragment of fragmented request (First, Middle or Last)
+*
+*
+* INPUT:
+*       MV_CESA_REQ* pReq   - Pointer to the request in the request queue.
+*
+* RETURN:
+*       MV_OK        - The fragment is successfully passed to HW for processing.
+*       MV_TERMINATE - Means, that HW finished its work on this packet and no more
+*                    interrupts will be generated for this request.
+*                    Function mvCesaReadyGet() must be called to complete request
+*                    processing and get request result.
+*
+*******************************************************************************/
+static MV_STATUS   mvCesaFragReqProcess(MV_CESA_REQ* pReq, MV_U8 frag)
+{
+    int                     i, copySize, cryptoDataSize, macDataSize, sid;
+    int                     cryptoIvOffset, digestOffset;
+    MV_U32                  config;
+    MV_CESA_COMMAND*        pCmd = pReq->pCmd;
+    MV_CESA_SA*             pSA;
+    MV_CESA_MBUF*           pMbuf;
+    MV_DMA_DESC*            pDmaDesc = pReq->dma[frag].pDmaFirst;
+    MV_U8*                  pSramBuf = cesaSramVirtPtr->buf;
+    int                     macTotalLen = 0;
+    int                     fixOffset, cryptoOffset, macOffset;
+
+    cesaStats.fragCount++;
+
+    sid = pReq->pCmd->sessionId;
+
+    pSA = &pCesaSAD[sid];
+
+    cryptoIvOffset = digestOffset = 0;
+    i = macDataSize = 0;
+    cryptoDataSize = 0;
+
+    /* First fragment processing */
+    if(pReq->fragMode == MV_CESA_FRAG_FIRST)
+    {
+        /* pReq->frags monitors processing of fragmented request between fragments */
+        pReq->frags.bufOffset = 0;
+        pReq->frags.cryptoSize = 0;
+        pReq->frags.macSize = 0;
+
+        config = pSA->config | (MV_CESA_FRAG_FIRST << MV_CESA_FRAG_MODE_OFFSET);
+
+        /* fixOffset can be not equal to zero only for FIRST fragment */
+        fixOffset = pReq->fixOffset;
+        /* For FIRST fragment crypto and mac offsets are taken from pCmd */
+        cryptoOffset = pCmd->cryptoOffset;
+        macOffset = pCmd->macOffset;
+
+        copySize = sizeof(cesaSramVirtPtr->buf) - pReq->fixOffset;
+
+        /* Find fragment size: Must meet all requirements for CRYPTO and MAC
+         * cryptoDataSize   - size of data will be encrypted/decrypted in this fragment
+         * macDataSize      - size of data will be signed/verified in this fragment
+         * copySize         - size of data will be copied from srcMbuf to SRAM and
+         *                  back to dstMbuf for this fragment
+         */
+        mvCesaFragSizeFind(pSA, pReq, cryptoOffset, macOffset,
+                        &copySize, &cryptoDataSize, &macDataSize);
+
+        if( (pSA->config & MV_CESA_OPERATION_MASK) !=
+                (MV_CESA_MAC_ONLY << MV_CESA_OPERATION_OFFSET))
+        {
+            /* CryptoIV special processing */
+            if( (pSA->config & MV_CESA_CRYPTO_MODE_MASK) ==
+                (MV_CESA_CRYPTO_CBC << MV_CESA_CRYPTO_MODE_BIT) )
+            {
+                /* In CBC mode for encode direction when IV from user */
+                if( (pCmd->ivFromUser) &&
+                    ((pSA->config & MV_CESA_DIRECTION_MASK) ==
+                        (MV_CESA_DIR_ENCODE << MV_CESA_DIRECTION_BIT)) )
+                {
+
+                    /* For Crypto Encode in CBC mode HW always takes IV from SRAM IVPointer,
+                    * (not from IVBufPointer). So when ivFromUser==1, we should copy IV from user place
+                    * in the buffer to SRAM IVPointer
+                    */
+                    i += mvCesaDmaCopyPrepare(pCmd->pSrc, cesaSramVirtPtr->cryptoIV, &pDmaDesc[i],
+                                    MV_FALSE, pCmd->ivOffset, pSA->cryptoIvSize, pCmd->skipFlush);
+                }
+
+                /* Special processing when IV is not located in the first fragment */
+                if(pCmd->ivOffset > (copySize - pSA->cryptoIvSize))
+                {
+                    /* Prepare dummy place for cryptoIV in SRAM */
+                    cryptoIvOffset = cesaSramVirtPtr->tempCryptoIV - mvCesaSramAddrGet();
+
+                    /* For Decryption: Copy IV value from pCmd->ivOffset to Special SRAM place */
+                    if((pSA->config & MV_CESA_DIRECTION_MASK) ==
+                            (MV_CESA_DIR_DECODE << MV_CESA_DIRECTION_BIT))
+                    {
+                        i += mvCesaDmaCopyPrepare(pCmd->pSrc, cesaSramVirtPtr->tempCryptoIV, &pDmaDesc[i],
+                                    MV_FALSE, pCmd->ivOffset, pSA->cryptoIvSize, pCmd->skipFlush);
+                    }
+                    else
+                    {
+                        /* For Encryption when IV is NOT from User: */
+                        /* Copy IV from SRAM to buffer (pCmd->ivOffset) */
+                        if(pCmd->ivFromUser == 0)
+                        {
+                            /* copy IV value from cryptoIV to Buffer (pCmd->ivOffset) */
+                            i += mvCesaDmaCopyPrepare(pCmd->pSrc, cesaSramVirtPtr->cryptoIV, &pDmaDesc[i],
+                                    MV_TRUE, pCmd->ivOffset, pSA->cryptoIvSize, pCmd->skipFlush);
+                        }
+                    }
+                }
+                else
+                {
+                    cryptoIvOffset = pCmd->ivOffset;
+                }
+            }
+        }
+
+        if( (pSA->config & MV_CESA_OPERATION_MASK) !=
+                (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET) )
+        {
+            /* MAC digest special processing on Decode direction */
+            if((pSA->config & MV_CESA_DIRECTION_MASK) ==
+                        (MV_CESA_DIR_DECODE << MV_CESA_DIRECTION_BIT))
+            {
+                /* Save digest from pCmd->digestOffset */
+                mvCesaCopyFromMbuf(pReq->frags.orgDigest,
+                               pCmd->pSrc, pCmd->digestOffset, pSA->digestSize);
+
+                /* If pCmd->digestOffset is not located on the first */
+                if(pCmd->digestOffset > (copySize - pSA->digestSize))
+                {
+                    MV_U8  digestZero[MV_CESA_MAX_DIGEST_SIZE];
+
+                    /* Set zeros to pCmd->digestOffset (DRAM) */
+                    memset(digestZero, 0, MV_CESA_MAX_DIGEST_SIZE);
+                    mvCesaCopyToMbuf(digestZero, pCmd->pSrc, pCmd->digestOffset, pSA->digestSize);
+
+                    /* Prepare dummy place for digest in SRAM */
+                    digestOffset = cesaSramVirtPtr->tempDigest - mvCesaSramAddrGet();
+                }
+                else
+                {
+                    digestOffset = pCmd->digestOffset;
+                }
+            }
+        }
+        /* Update SA in SRAM */
+        if(cesaLastSid != sid)
+        {
+            mvCesaSramSaUpdate(sid, &pDmaDesc[i]);
+            i++;
+        }
+
+        pReq->fragMode = MV_CESA_FRAG_MIDDLE;
+    }
+    else
+    {
+        /* Continue fragment */
+        fixOffset = 0;
+        cryptoOffset = 0;
+        macOffset = 0;
+        if( (pCmd->pSrc->mbufSize - pReq->frags.bufOffset) <= sizeof(cesaSramVirtPtr->buf))
+        {
+            /* Last fragment */
+            config = pSA->config | (MV_CESA_FRAG_LAST << MV_CESA_FRAG_MODE_OFFSET);
+            pReq->fragMode = MV_CESA_FRAG_LAST;
+            copySize = pCmd->pSrc->mbufSize - pReq->frags.bufOffset;
+
+            if( (pSA->config & MV_CESA_OPERATION_MASK) !=
+                (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET) )
+            {
+                macDataSize = pCmd->macLength - pReq->frags.macSize;
+
+                /* If pCmd->digestOffset is not located on last fragment */
+                if(pCmd->digestOffset < pReq->frags.bufOffset)
+                {
+                    /* Prepare dummy place for digest in SRAM */
+                    digestOffset = cesaSramVirtPtr->tempDigest - mvCesaSramAddrGet();
+                }
+                else
+                {
+                    digestOffset = pCmd->digestOffset - pReq->frags.bufOffset;
+                }
+                pReq->frags.newDigestOffset = digestOffset;
+                macTotalLen = pCmd->macLength;
+
+                /* HW can't calculate the Digest correctly for fragmented packets
+                 * in the following cases:
+                 *  - MV88F5182                                           ||
+                 *  - MV88F5181L when total macLength more that 16 Kbytes ||
+                 *  - total macLength more that 64 Kbytes
+                 */
+                if( (mvCtrlModelGet() == MV_5182_DEV_ID) ||
+                    ( (mvCtrlModelGet() == MV_5181_DEV_ID) &&
+                      (mvCtrlRevGet() >= MV_5181L_A0_REV)  &&
+                      (pCmd->macLength >= (1 << 14)) ) )
+                {
+                    return MV_TERMINATE;
+                }
+            }
+            if( (pSA->config & MV_CESA_OPERATION_MASK) !=
+                (MV_CESA_MAC_ONLY << MV_CESA_OPERATION_OFFSET) )
+            {
+                cryptoDataSize = pCmd->cryptoLength - pReq->frags.cryptoSize;
+            }
+
+            /* cryptoIvOffset - don't care */
+        }
+        else
+        {
+            /* WA for MV88F5182 SHA1 and MD5 fragmentation mode */
+            if( (mvCtrlModelGet() == MV_5182_DEV_ID) &&
+                (((pSA->config & MV_CESA_MAC_MODE_MASK) ==
+                    (MV_CESA_MAC_MD5 << MV_CESA_MAC_MODE_OFFSET)) ||
+                ((pSA->config & MV_CESA_MAC_MODE_MASK) ==
+                    (MV_CESA_MAC_SHA1 << MV_CESA_MAC_MODE_OFFSET))) )
+            {
+                pReq->frags.newDigestOffset = cesaSramVirtPtr->tempDigest - mvCesaSramAddrGet();
+                pReq->fragMode = MV_CESA_FRAG_LAST;
+
+                return MV_TERMINATE;
+            }
+            /* Middle fragment */
+            config = pSA->config | (MV_CESA_FRAG_MIDDLE << MV_CESA_FRAG_MODE_OFFSET);
+            copySize = sizeof(cesaSramVirtPtr->buf);
+            /* digestOffset and cryptoIvOffset - don't care */
+
+            /* Find fragment size */
+            mvCesaFragSizeFind(pSA, pReq, cryptoOffset, macOffset,
+                            &copySize, &cryptoDataSize, &macDataSize);
+        }
+    }
+    /********* Prepare DMA descriptors to copy from pSrc to SRAM *********/
+    pMbuf = pCmd->pSrc;
+    i += mvCesaDmaCopyPrepare(pMbuf, pSramBuf + fixOffset, &pDmaDesc[i],
+                                MV_FALSE, pReq->frags.bufOffset, copySize, pCmd->skipFlush);
+
+    /* Prepare CESA descriptor to copy from DRAM to SRAM by DMA */
+    mvCesaSramDescrBuild(config, frag, 
+                cryptoOffset + fixOffset, cryptoIvOffset + fixOffset,
+                cryptoDataSize, macOffset + fixOffset,
+                digestOffset + fixOffset, macDataSize, macTotalLen,
+                pReq, &pDmaDesc[i]);
+    i++;
+
+   /* Add special descriptor Ownership for CPU */
+    pDmaDesc[i].byteCnt = 0;
+    pDmaDesc[i].phySrcAdd = 0;
+    pDmaDesc[i].phyDestAdd = 0;
+    i++;
+
+    /********* Prepare DMA descriptors to copy from SRAM to pDst *********/
+    pMbuf = pCmd->pDst;
+    i += mvCesaDmaCopyPrepare(pMbuf, pSramBuf + fixOffset, &pDmaDesc[i],
+                                MV_TRUE, pReq->frags.bufOffset, copySize, pCmd->skipFlush);
+
+    /* Next field of Last DMA descriptor must be NULL */
+    pDmaDesc[i-1].phyNextDescPtr = 0;
+    pReq->dma[frag].pDmaLast = &pDmaDesc[i-1];
+    mvOsCacheFlush(NULL, pReq->dma[frag].pDmaFirst, 
+                    i*sizeof(MV_DMA_DESC));
+
+    /*mvCesaDebugDescriptor(&cesaSramVirtPtr->desc[frag]);*/
+
+    pReq->frags.bufOffset += copySize;
+    pReq->frags.cryptoSize += cryptoDataSize;
+    pReq->frags.macSize += macDataSize;
+
+    return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvCesaReqProcess - Process regular (Non-fragmented) request
+*
+* DESCRIPTION:
+*       This function processes the whole (not fragmented) request
+*
+* INPUT:
+*       MV_CESA_REQ* pReq   - Pointer to the request in the request queue.
+*
+* RETURN:
+*       MV_OK   - The request is successfully passed to HW for processing.
+*       Other   - Failure. The request will not be processed
+*
+*******************************************************************************/
+static MV_STATUS   mvCesaReqProcess(MV_CESA_REQ* pReq)
+{
+    MV_CESA_MBUF    *pMbuf;
+    MV_DMA_DESC     *pDmaDesc;
+    MV_U8           *pSramBuf;
+    int             sid, i, fixOffset;
+    MV_CESA_SA      *pSA;
+    MV_CESA_COMMAND *pCmd = pReq->pCmd;
+
+    cesaStats.procCount++;
+
+    sid = pCmd->sessionId;
+    pSA = &pCesaSAD[sid];
+    pDmaDesc = pReq->dma[0].pDmaFirst;
+    pSramBuf = cesaSramVirtPtr->buf;
+    fixOffset = pReq->fixOffset;
+
+/*
+    mvOsPrintf("mvCesaReqProcess: sid=%d, pSA=%p, pDmaDesc=%p, pSramBuf=%p\n",
+                sid, pSA, pDmaDesc, pSramBuf);
+*/
+    i = 0;
+
+    /* Crypto IV Special processing in CBC mode for Encryption direction */
+    if( ((pSA->config & MV_CESA_OPERATION_MASK) != (MV_CESA_MAC_ONLY << MV_CESA_OPERATION_OFFSET)) &&
+        ((pSA->config & MV_CESA_CRYPTO_MODE_MASK) == (MV_CESA_CRYPTO_CBC << MV_CESA_CRYPTO_MODE_BIT)) &&
+        ((pSA->config & MV_CESA_DIRECTION_MASK) == (MV_CESA_DIR_ENCODE << MV_CESA_DIRECTION_BIT)) &&
+        (pCmd->ivFromUser) )
+    {
+        /* For Crypto Encode in CBC mode HW always takes IV from SRAM IVPointer,
+         * (not from IVBufPointer). So when ivFromUser==1, we should copy IV from user place
+         * in the buffer to SRAM IVPointer
+         */
+        i += mvCesaDmaCopyPrepare(pCmd->pSrc, cesaSramVirtPtr->cryptoIV, &pDmaDesc[i],
+                                    MV_FALSE, pCmd->ivOffset, pSA->cryptoIvSize, pCmd->skipFlush);
+    }
+
+    /* Update SA in SRAM */
+    if(cesaLastSid != sid)
+    {
+        mvCesaSramSaUpdate(sid, &pDmaDesc[i]);
+        i++;
+    }
+
+    /********* Prepare DMA descriptors to copy from pSrc to SRAM *********/
+    pMbuf = pCmd->pSrc;
+    i += mvCesaDmaCopyPrepare(pMbuf, pSramBuf + fixOffset, &pDmaDesc[i],
+                                MV_FALSE, 0, pMbuf->mbufSize, pCmd->skipFlush);
+
+    /* Prepare Security Accelerator descriptor to SRAM words 0 - 7 */
+    mvCesaSramDescrBuild(pSA->config, 0, pCmd->cryptoOffset + fixOffset, 
+                        pCmd->ivOffset + fixOffset, pCmd->cryptoLength,
+                        pCmd->macOffset + fixOffset, pCmd->digestOffset + fixOffset,
+                        pCmd->macLength, pCmd->macLength, pReq, &pDmaDesc[i]);
+    i++;
+
+   /* Add special descriptor Ownership for CPU */
+    pDmaDesc[i].byteCnt = 0;
+    pDmaDesc[i].phySrcAdd = 0;
+    pDmaDesc[i].phyDestAdd = 0;
+    i++;
+
+    /********* Prepare DMA descriptors to copy from SRAM to pDst *********/
+    pMbuf = pCmd->pDst;
+    i += mvCesaDmaCopyPrepare(pMbuf, pSramBuf + fixOffset, &pDmaDesc[i],
+                                MV_TRUE, 0, pMbuf->mbufSize, pCmd->skipFlush);
+
+    /* Next field of Last DMA descriptor must be NULL */
+    pDmaDesc[i-1].phyNextDescPtr = 0;
+    pReq->dma[0].pDmaLast = &pDmaDesc[i-1];
+    mvOsCacheFlush(NULL, pReq->dma[0].pDmaFirst, i*sizeof(MV_DMA_DESC));
+            
+    return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvCesaSramDescrBuild - Set CESA descriptor in SRAM
+*
+* DESCRIPTION:
+*       This function builds CESA descriptor in SRAM from all Command parameters
+*
+*
+* INPUT:
+*       int     chan            - CESA channel uses the descriptor
+*       MV_U32  config          - 32 bits of WORD_0 in CESA descriptor structure
+*       int     cryptoOffset    - Offset from the beginning of SRAM buffer where
+*                               data for encryption/decription is started.
+*       int     ivOffset        - Offset of crypto IV from the SRAM base. Valid only
+*                               for first fragment.
+*       int     cryptoLength    - Size (in bytes) of data for encryption/descryption
+*                               operation on this fragment.
+*       int     macOffset       - Offset from the beginning of SRAM buffer where
+*                               data for Authentication is started
+*       int     digestOffset    - Offset from the beginning of SRAM buffer where
+*                               digest is located. Valid for first and last fragments.
+*       int     macLength       - Size (in bytes) of data for Authentication
+*                               operation on this fragment.
+*       int     macTotalLen     - Toatl size (in bytes) of data for Authentication
+*                               operation on the whole request (packet). Valid for
+*                               last fragment only.
+*
+* RETURN:   None
+*
+*******************************************************************************/
+static void    mvCesaSramDescrBuild(MV_U32 config, int frag, 
+                             int cryptoOffset, int ivOffset, int cryptoLength,
+                             int macOffset, int digestOffset, int macLength,
+                             int macTotalLen, MV_CESA_REQ* pReq, MV_DMA_DESC* pDmaDesc)
+{    
+    MV_CESA_DESC*   pCesaDesc = &pReq->pCesaDesc[frag];
+    MV_CESA_DESC*   pSramDesc = pSramDesc = &cesaSramVirtPtr->desc;
+    MV_U16          sramBufOffset = (MV_U16)((MV_U8*)cesaSramVirtPtr->buf - mvCesaSramAddrGet());
+
+    pCesaDesc->config = MV_32BIT_LE(config);
+
+    if( (config & MV_CESA_OPERATION_MASK) !=
+         (MV_CESA_MAC_ONLY << MV_CESA_OPERATION_OFFSET) )
+    {
+        /* word 1 */
+        pCesaDesc->cryptoSrcOffset = MV_16BIT_LE(sramBufOffset + cryptoOffset);
+        pCesaDesc->cryptoDstOffset = MV_16BIT_LE(sramBufOffset + cryptoOffset);
+        /* word 2 */
+        pCesaDesc->cryptoDataLen = MV_16BIT_LE(cryptoLength);
+        /* word 3 */
+        pCesaDesc->cryptoKeyOffset = MV_16BIT_LE((MV_U16)(cesaSramVirtPtr->sramSA.cryptoKey - 
+                                                            mvCesaSramAddrGet()));
+        /* word 4 */
+        pCesaDesc->cryptoIvOffset  = MV_16BIT_LE((MV_U16)(cesaSramVirtPtr->cryptoIV -
+                                                            mvCesaSramAddrGet()));
+        pCesaDesc->cryptoIvBufOffset = MV_16BIT_LE(sramBufOffset + ivOffset);
+    }
+
+    if( (config & MV_CESA_OPERATION_MASK) !=
+         (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET) )
+    {
+        /* word 5 */
+        pCesaDesc->macSrcOffset = MV_16BIT_LE(sramBufOffset + macOffset);
+        pCesaDesc->macTotalLen = MV_16BIT_LE(macTotalLen);
+
+        /* word 6 */
+        pCesaDesc->macDigestOffset = MV_16BIT_LE(sramBufOffset + digestOffset);
+        pCesaDesc->macDataLen = MV_16BIT_LE(macLength);
+
+        /* word 7 */
+        pCesaDesc->macInnerIvOffset = MV_16BIT_LE((MV_U16)(cesaSramVirtPtr->sramSA.macInnerIV - 
+                                 mvCesaSramAddrGet()));
+        pCesaDesc->macOuterIvOffset = MV_16BIT_LE((MV_U16)(cesaSramVirtPtr->sramSA.macOuterIV - 
+                                 mvCesaSramAddrGet()));
+    }
+    /* Prepare DMA descriptor to CESA descriptor from DRAM to SRAM */
+    pDmaDesc->phySrcAdd = MV_32BIT_LE(mvCesaVirtToPhys(&pReq->cesaDescBuf, pCesaDesc));
+    pDmaDesc->phyDestAdd = MV_32BIT_LE(mvCesaSramVirtToPhys(NULL, (MV_U8*)pSramDesc));
+    pDmaDesc->byteCnt = MV_32BIT_LE(sizeof(MV_CESA_DESC) | BIT31);
+                                
+    /* flush Source buffer */
+    mvOsCacheFlush(NULL, pCesaDesc, sizeof(MV_CESA_DESC));
+}
+
+/*******************************************************************************
+* mvCesaSramSaUpdate - Move required SA information to SRAM if needed.
+*
+* DESCRIPTION:
+*   Copy to SRAM values of the required SA.
+*
+*
+* INPUT:
+*       short       sid          - Session ID needs SRAM Cache update
+*       MV_DMA_DESC *pDmaDesc   - Pointer to DMA descriptor used to
+*                                copy SA values from DRAM to SRAM.
+*
+* RETURN:
+*       MV_OK           - Cache entry for this SA copied to SRAM.
+*       MV_NO_CHANGE    - Cache entry for this SA already exist in SRAM
+*
+*******************************************************************************/
+static INLINE void   mvCesaSramSaUpdate(short sid, MV_DMA_DESC *pDmaDesc)
+{
+    MV_CESA_SA      *pSA = &pCesaSAD[sid];
+
+    /* Prepare DMA descriptor to Copy CACHE_SA from SA database in DRAM to SRAM */
+     pDmaDesc->byteCnt = MV_32BIT_LE(sizeof(MV_CESA_SRAM_SA) | BIT31);
+    pDmaDesc->phySrcAdd = MV_32BIT_LE(mvCesaVirtToPhys(&cesaSramSaBuf, pSA->pSramSA));
+     pDmaDesc->phyDestAdd =
+          MV_32BIT_LE(mvCesaSramVirtToPhys(NULL, (MV_U8*)&cesaSramVirtPtr->sramSA));
+
+    /* Source buffer is already flushed during OpenSession*/
+    /*mvOsCacheFlush(NULL, &pSA->sramSA, sizeof(MV_CESA_SRAM_SA));*/
+}
+
+/*******************************************************************************
+* mvCesaDmaCopyPrepare - prepare DMA descriptor list to copy data presented by
+*                       Mbuf structure from DRAM to SRAM
+*
+* DESCRIPTION:
+*
+*
+* INPUT:
+*       MV_CESA_MBUF*   pMbuf       - pointer to Mbuf structure contains request
+*                                   data in DRAM
+*       MV_U8*          pSramBuf    - pointer to buffer in SRAM where data should
+*                                   be copied to.
+*       MV_DMA_DESC*    pDmaDesc   - pointer to first DMA descriptor for this copy.
+*                                   The function set number of DMA descriptors needed
+*                                   to copy the copySize bytes from Mbuf.
+*       MV_BOOL         isToMbuf    - Copy direction.
+*                                   MV_TRUE means copy from SRAM buffer to Mbuf in DRAM.
+*                                   MV_FALSE means copy from Mbuf in DRAM to SRAM buffer.
+*       int             offset      - Offset in the Mbuf structure that copy should be
+*                                   started from.
+*       int             copySize    - Size of data should be copied.
+*
+* RETURN:
+*       int  - number of DMA descriptors used for the copy.
+*
+*******************************************************************************/
+#ifndef MV_NETBSD
+static INLINE int    mvCesaDmaCopyPrepare(MV_CESA_MBUF* pMbuf, MV_U8* pSramBuf, 
+                        MV_DMA_DESC* pDmaDesc, MV_BOOL isToMbuf,
+                        int offset, int copySize, MV_BOOL skipFlush)
+{
+    int     bufOffset, bufSize, size, frag, i;
+    MV_U8*  pBuf;
+
+    i = 0;
+
+    /* Calculate start place for copy: fragment number and offset in the fragment */
+    frag = mvCesaMbufOffset(pMbuf, offset, &bufOffset);
+    bufSize = pMbuf->pFrags[frag].bufSize - bufOffset;
+    pBuf = pMbuf->pFrags[frag].bufVirtPtr + bufOffset;
+
+    /* Size accumulate total copy size */
+    size = 0;
+
+    /* Create DMA lists to copy mBuf from pSrc to SRAM */
+    while(size < copySize)
+    {
+        /* Find copy size for each DMA descriptor */
+        bufSize = MV_MIN(bufSize, (copySize - size));
+        pDmaDesc[i].byteCnt = MV_32BIT_LE(bufSize | BIT31);
+        if(isToMbuf)
+        {
+            pDmaDesc[i].phyDestAdd = MV_32BIT_LE(mvOsIoVirtToPhy(NULL, pBuf));
+            pDmaDesc[i].phySrcAdd  =
+                MV_32BIT_LE(mvCesaSramVirtToPhys(NULL, (pSramBuf + size)));
+            /* invalidate the buffer */
+	    if(skipFlush == MV_FALSE)
+            	mvOsCacheInvalidate(NULL, pBuf, bufSize);
+        }
+        else
+        {
+            pDmaDesc[i].phySrcAdd = MV_32BIT_LE(mvOsIoVirtToPhy(NULL, pBuf));
+            pDmaDesc[i].phyDestAdd =
+                MV_32BIT_LE(mvCesaSramVirtToPhys(NULL, (pSramBuf + size)));
+            /* flush the buffer */
+	    if(skipFlush == MV_FALSE)
+            	mvOsCacheFlush(NULL, pBuf, bufSize);
+        }
+
+        /* Count number of used DMA descriptors */
+        i++;
+        size += bufSize;
+
+        /* go to next fragment in the Mbuf */
+        frag++;
+        pBuf = pMbuf->pFrags[frag].bufVirtPtr;
+        bufSize = pMbuf->pFrags[frag].bufSize;
+    }
+    return i;
+}
+#else /* MV_NETBSD */
+static int    mvCesaDmaCopyPrepare(MV_CESA_MBUF* pMbuf, MV_U8* pSramBuf,
+                        MV_DMA_DESC* pDmaDesc, MV_BOOL isToMbuf,
+                        int offset, int copySize, MV_BOOL skipFlush)
+{
+	int bufOffset, bufSize, thisSize, size, frag, i;
+	MV_ULONG bufPhys, sramPhys;
+    MV_U8*  pBuf;
+
+	/*
+	 * Calculate start place for copy: fragment number and offset in
+	 * the fragment
+	 */
+    frag = mvCesaMbufOffset(pMbuf, offset, &bufOffset);
+
+	/*
+	 * Get SRAM physical address only once. We can update it in-place
+	 * as we build the descriptor chain.
+	 */
+	sramPhys = mvCesaSramVirtToPhys(NULL, pSramBuf);
+
+	/*
+	 * 'size' accumulates total copy size, 'i' counts desccriptors.
+	 */
+	size = i = 0;
+
+	/* Create DMA lists to copy mBuf from pSrc to SRAM */
+	while (size < copySize) {
+		/*
+		 * Calculate # of bytes to copy from the current fragment,
+		 * and the pointer to the start of data
+		 */
+    bufSize = pMbuf->pFrags[frag].bufSize - bufOffset;
+    pBuf = pMbuf->pFrags[frag].bufVirtPtr + bufOffset;
+		bufOffset = 0;	/* First frag may be non-zero */
+		frag++;
+
+		/*
+		 * As long as there is data in the current fragment...
+		 */
+		while (bufSize > 0) {
+			/*
+			 * Ensure we don't cross an MMU page boundary.
+			 * XXX: This is NetBSD-specific, but it is a
+			 * quick and dirty way to fix the problem.
+			 * A true HAL would rely on the OS-specific
+			 * driver to do this...
+			 */
+			thisSize = PAGE_SIZE -
+			    (((MV_ULONG)pBuf) & (PAGE_SIZE - 1));
+			thisSize = MV_MIN(bufSize, thisSize);
+			/*
+			 * Make sure we don't copy more than requested
+			 */
+			if (thisSize > (copySize - size)) {
+				thisSize = copySize - size;
+				bufSize = 0;
+			}
+
+			/*
+			 * Physicall address of this fragment
+			 */
+			bufPhys = MV_32BIT_LE(mvOsIoVirtToPhy(NULL, pBuf));
+
+			/*
+			 * Set up the descriptor
+			 */
+		        pDmaDesc[i].byteCnt = MV_32BIT_LE(thisSize | BIT31);
+		        if(isToMbuf) {
+				pDmaDesc[i].phyDestAdd = bufPhys;
+				pDmaDesc[i].phySrcAdd  = MV_32BIT_LE(sramPhys);
+            /* invalidate the buffer */
+				if(skipFlush == MV_FALSE)
+					mvOsCacheInvalidate(NULL, pBuf, thisSize);
+			} else {
+				pDmaDesc[i].phySrcAdd = bufPhys;
+				pDmaDesc[i].phyDestAdd = MV_32BIT_LE(sramPhys);
+            /* flush the buffer */
+				if(skipFlush == MV_FALSE)
+					mvOsCacheFlush(NULL, pBuf, thisSize);
+			}
+
+			pDmaDesc[i].phyNextDescPtr =
+			    MV_32BIT_LE(mvOsIoVirtToPhy(NULL,(&pDmaDesc[i+1])));
+
+        /* flush the DMA desc */
+        mvOsCacheFlush(NULL, &pDmaDesc[i], sizeof(MV_DMA_DESC));
+
+			/* Update state */
+			bufSize -= thisSize;
+			sramPhys += thisSize;
+			pBuf += thisSize;
+			size += thisSize;
+        i++;
+		}
+	}
+
+    return i;
+}
+#endif /* MV_NETBSD */
+/*******************************************************************************
+* mvCesaHmacIvGet - Calculate Inner and Outter values from HMAC key
+*
+* DESCRIPTION:
+*       This function calculate Inner and Outer values used for HMAC algorithm.
+*       This operation allows improve performance fro the whole HMAC processing.
+*
+* INPUT:
+*       MV_CESA_MAC_MODE    macMode     - Authentication mode: HMAC_MD5 or HMAC_SHA1.
+*       unsigned char       key[]       - Pointer to HMAC key.
+*       int                 keyLength   - Size of HMAC key (maximum 64 bytes)
+*
+* OUTPUT:
+*       unsigned char       innerIV[]   - HASH(key^inner)
+*       unsigned char       outerIV[]   - HASH(key^outter)
+*
+* RETURN:   None
+*
+*******************************************************************************/
+static void    mvCesaHmacIvGet(MV_CESA_MAC_MODE macMode, unsigned char key[], int keyLength,
+                     unsigned char innerIV[], unsigned char outerIV[])
+{
+    unsigned char   inner[MV_CESA_MAX_MAC_KEY_LENGTH];
+    unsigned char   outer[MV_CESA_MAX_MAC_KEY_LENGTH];
+    int             i, digestSize = 0;
+#if defined(MV_CPU_LE) || defined(MV_PPC)
+    MV_U32          swapped32, val32, *pVal32;
+#endif 
+    for(i=0; i<keyLength; i++)
+    {
+        inner[i] = 0x36 ^ key[i];
+        outer[i] = 0x5c ^ key[i];
+    }
+
+    for(i=keyLength; i<MV_CESA_MAX_MAC_KEY_LENGTH; i++)
+    {
+        inner[i] = 0x36;
+        outer[i] = 0x5c;
+    }
+    if(macMode == MV_CESA_MAC_HMAC_MD5)
+    {
+        MV_MD5_CONTEXT  ctx;
+
+        mvMD5Init(&ctx);
+        mvMD5Update(&ctx, inner, MV_CESA_MAX_MAC_KEY_LENGTH);
+
+        memcpy(innerIV, ctx.buf, MV_CESA_MD5_DIGEST_SIZE);
+        memset(&ctx, 0, sizeof(ctx));
+
+        mvMD5Init(&ctx);
+        mvMD5Update(&ctx, outer, MV_CESA_MAX_MAC_KEY_LENGTH);
+        memcpy(outerIV, ctx.buf, MV_CESA_MD5_DIGEST_SIZE);
+        memset(&ctx, 0, sizeof(ctx));
+        digestSize = MV_CESA_MD5_DIGEST_SIZE;
+    }
+    else if(macMode == MV_CESA_MAC_HMAC_SHA1)
+    {
+        MV_SHA1_CTX  ctx;
+
+        mvSHA1Init(&ctx);
+        mvSHA1Update(&ctx, inner, MV_CESA_MAX_MAC_KEY_LENGTH);
+        memcpy(innerIV, ctx.state, MV_CESA_SHA1_DIGEST_SIZE);
+        memset(&ctx, 0, sizeof(ctx));
+
+        mvSHA1Init(&ctx);
+        mvSHA1Update(&ctx, outer, MV_CESA_MAX_MAC_KEY_LENGTH);
+        memcpy(outerIV, ctx.state, MV_CESA_SHA1_DIGEST_SIZE);
+        memset(&ctx, 0, sizeof(ctx));
+        digestSize = MV_CESA_SHA1_DIGEST_SIZE;
+    }
+    else
+    {
+        mvOsPrintf("hmacGetIV: Unexpected macMode %d\n", macMode);
+    }
+#if defined(MV_CPU_LE) || defined(MV_PPC)
+    /* 32 bits Swap of Inner and Outer values */
+    pVal32 = (MV_U32*)innerIV;
+    for(i=0; i<digestSize/4; i++)
+    {
+        val32 = *pVal32;
+        swapped32 = MV_BYTE_SWAP_32BIT(val32);
+        *pVal32 = swapped32;
+        pVal32++;
+    }
+    pVal32 = (MV_U32*)outerIV;
+    for(i=0; i<digestSize/4; i++)
+    {
+        val32 = *pVal32;
+        swapped32 = MV_BYTE_SWAP_32BIT(val32);
+        *pVal32 = swapped32;
+        pVal32++;
+    }
+#endif  /* defined(MV_CPU_LE) || defined(MV_PPC) */
+}
+
+
+/*******************************************************************************
+* mvCesaFragSha1Complete - Complete SHA1 authentication started by HW using SW
+*
+* DESCRIPTION:
+*
+*
+* INPUT:
+*       MV_CESA_MBUF*   pMbuf           - Pointer to Mbuf structure where data
+*                                       for SHA1 is placed.
+*       int             offset          - Offset in the Mbuf structure where
+*                                       unprocessed data for SHA1 is started.
+*       MV_U8*          pOuterIV        - Pointer to OUTER for this session.
+*                                       If pOuterIV==NULL - MAC mode is HASH_SHA1
+*                                       If pOuterIV!=NULL - MAC mode is HMAC_SHA1
+*       int             macLeftSize     - Size of unprocessed data for SHA1.
+*       int             macTotalSize    - Total size of data for SHA1 in the
+*                                       request (processed + unprocessed)
+*
+* OUTPUT:
+*       MV_U8*     pDigest  - Pointer to place where calculated Digest will
+*                           be stored.
+*
+* RETURN:   None
+*
+*******************************************************************************/
+static void    mvCesaFragSha1Complete(MV_CESA_MBUF* pMbuf, int offset,
+                                      MV_U8* pOuterIV, int macLeftSize,
+                                      int macTotalSize, MV_U8* pDigest)
+{
+    MV_SHA1_CTX     ctx;
+    MV_U8           *pData;
+    int             i, frag, fragOffset, size;
+
+    /* Read temporary Digest from HW */
+    for(i=0; i<MV_CESA_SHA1_DIGEST_SIZE/4; i++)
+    {
+        ctx.state[i] = MV_REG_READ(MV_CESA_AUTH_INIT_VAL_DIGEST_REG(i));
+    }
+    /* Initialize MV_SHA1_CTX structure */
+    memset(ctx.buffer, 0, 64);
+    /* Set count[0] in bits. 32 bits is enough for 512 MBytes */
+    /* so count[1] is always 0 */
+    ctx.count[0] = ((macTotalSize - macLeftSize) * 8);
+    ctx.count[1] = 0;
+
+    /* If HMAC - add size of Inner block (64 bytes) ro count[0] */
+    if(pOuterIV != NULL)
+        ctx.count[0] += (64 * 8);
+
+    /* Get place of unprocessed data in the Mbuf structure */
+    frag = mvCesaMbufOffset(pMbuf, offset, &fragOffset);
+    if(frag == MV_INVALID)
+    {
+        mvOsPrintf("CESA Mbuf Error: offset (%d) out of range\n", offset);
+        return;
+    }
+
+    pData = pMbuf->pFrags[frag].bufVirtPtr + fragOffset;
+    size = pMbuf->pFrags[frag].bufSize - fragOffset;
+
+    /* Complete Inner part */
+    while(macLeftSize > 0)
+    {
+        if(macLeftSize <= size)
+        {
+            mvSHA1Update(&ctx, pData, macLeftSize);
+            break;
+        }
+        mvSHA1Update(&ctx, pData, size);
+        macLeftSize -= size;
+        frag++;
+        pData = pMbuf->pFrags[frag].bufVirtPtr;
+        size = pMbuf->pFrags[frag].bufSize;
+    }
+    mvSHA1Final(pDigest, &ctx);
+/*
+    mvOsPrintf("mvCesaFragSha1Complete: pOuterIV=%p, macLeftSize=%d, macTotalSize=%d\n",
+                pOuterIV, macLeftSize, macTotalSize);
+    mvDebugMemDump(pDigest, MV_CESA_SHA1_DIGEST_SIZE, 1);
+*/
+
+    if(pOuterIV != NULL)
+    {
+        /* If HMAC - Complete Outer part */
+        for(i=0; i<MV_CESA_SHA1_DIGEST_SIZE/4; i++)
+        {
+#if defined(MV_CPU_LE) || defined(MV_ARM)
+            ctx.state[i] = MV_BYTE_SWAP_32BIT(((MV_U32*)pOuterIV)[i]);
+#else
+	    ctx.state[i] = ((MV_U32*)pOuterIV)[i];
+#endif
+	}
+        memset(ctx.buffer, 0, 64);
+
+        ctx.count[0] = 64*8;
+        ctx.count[1] = 0;
+        mvSHA1Update(&ctx, pDigest, MV_CESA_SHA1_DIGEST_SIZE);
+        mvSHA1Final(pDigest, &ctx);
+    }
+}
+
+/*******************************************************************************
+* mvCesaFragMd5Complete - Complete MD5 authentication started by HW using SW
+*
+* DESCRIPTION:
+*
+*
+* INPUT:
+*       MV_CESA_MBUF*   pMbuf           - Pointer to Mbuf structure where data
+*                                       for SHA1 is placed.
+*       int             offset          - Offset in the Mbuf structure where
+*                                       unprocessed data for MD5 is started.
+*       MV_U8*          pOuterIV        - Pointer to OUTER for this session.
+*                                       If pOuterIV==NULL - MAC mode is HASH_MD5
+*                                       If pOuterIV!=NULL - MAC mode is HMAC_MD5
+*       int             macLeftSize     - Size of unprocessed data for MD5.
+*       int             macTotalSize    - Total size of data for MD5 in the
+*                                       request (processed + unprocessed)
+*
+* OUTPUT:
+*       MV_U8*     pDigest  - Pointer to place where calculated Digest will
+*                           be stored.
+*
+* RETURN:   None
+*
+*******************************************************************************/
+static void    mvCesaFragMd5Complete(MV_CESA_MBUF* pMbuf, int offset,
+                                     MV_U8* pOuterIV, int macLeftSize,
+                                     int macTotalSize, MV_U8* pDigest)
+{
+    MV_MD5_CONTEXT  ctx;
+    MV_U8           *pData;
+    int             i, frag, fragOffset, size;
+
+    /* Read temporary Digest from HW */
+    for(i=0; i<MV_CESA_MD5_DIGEST_SIZE/4; i++)
+    {
+        ctx.buf[i] = MV_REG_READ(MV_CESA_AUTH_INIT_VAL_DIGEST_REG(i));
+    }
+    memset(ctx.in, 0, 64);
+
+    /* Set count[0] in bits. 32 bits is enough for 512 MBytes */
+    /* so count[1] is always 0 */
+    ctx.bits[0] = ((macTotalSize - macLeftSize) * 8);
+    ctx.bits[1] = 0;
+
+    /* If HMAC - add size of Inner block (64 bytes) ro count[0] */
+    if(pOuterIV != NULL)
+        ctx.bits[0] += (64 * 8);
+
+    frag = mvCesaMbufOffset(pMbuf, offset, &fragOffset);
+    if(frag == MV_INVALID)
+    {
+        mvOsPrintf("CESA Mbuf Error: offset (%d) out of range\n", offset);
+        return;
+    }
+
+    pData = pMbuf->pFrags[frag].bufVirtPtr + fragOffset;
+    size = pMbuf->pFrags[frag].bufSize - fragOffset;
+
+    /* Complete Inner part */
+    while(macLeftSize > 0)
+    {
+        if(macLeftSize <= size)
+        {
+            mvMD5Update(&ctx, pData, macLeftSize);
+            break;
+        }
+        mvMD5Update(&ctx, pData, size);
+        macLeftSize -= size;
+        frag++;
+        pData = pMbuf->pFrags[frag].bufVirtPtr;
+        size = pMbuf->pFrags[frag].bufSize;
+    }
+    mvMD5Final(pDigest, &ctx);
+
+/*
+    mvOsPrintf("mvCesaFragMd5Complete: pOuterIV=%p, macLeftSize=%d, macTotalSize=%d\n",
+                pOuterIV, macLeftSize, macTotalSize);
+    mvDebugMemDump(pDigest, MV_CESA_MD5_DIGEST_SIZE, 1);
+*/
+    if(pOuterIV != NULL)
+    {
+        /* Complete Outer part */
+        for(i=0; i<MV_CESA_MD5_DIGEST_SIZE/4; i++)
+        {
+#if defined(MV_CPU_LE) || defined(MV_ARM)
+            ctx.buf[i] = MV_BYTE_SWAP_32BIT(((MV_U32*)pOuterIV)[i]);
+#else
+	    ctx.buf[i] = ((MV_U32*)pOuterIV)[i];
+#endif
+	}
+        memset(ctx.in, 0, 64);
+
+        ctx.bits[0] = 64*8;
+        ctx.bits[1] = 0;
+        mvMD5Update(&ctx, pDigest, MV_CESA_MD5_DIGEST_SIZE);
+        mvMD5Final(pDigest, &ctx);
+    }
+}
+
+/*******************************************************************************
+* mvCesaFragAuthComplete -
+*
+* DESCRIPTION:
+*
+*
+* INPUT:
+*       MV_CESA_REQ*    pReq,
+*       MV_CESA_SA*     pSA,
+*       int             macDataSize
+*
+* RETURN:
+*       MV_STATUS
+*
+*******************************************************************************/
+static MV_STATUS   mvCesaFragAuthComplete(MV_CESA_REQ* pReq, MV_CESA_SA* pSA,
+                               int macDataSize)
+{
+    MV_CESA_COMMAND*        pCmd = pReq->pCmd;
+    MV_U8*                  pDigest;
+    MV_CESA_MAC_MODE        macMode;
+    MV_U8*                  pOuterIV = NULL;
+
+    /* Copy data from Source fragment to Destination */
+    if(pCmd->pSrc != pCmd->pDst)
+    {
+        mvCesaMbufCopy(pCmd->pDst, pReq->frags.bufOffset,
+                       pCmd->pSrc, pReq->frags.bufOffset, macDataSize);
+    }
+
+/*
+    mvCesaCopyFromMbuf(cesaSramVirtPtr->buf[0], pCmd->pSrc, pReq->frags.bufOffset, macDataSize);
+    mvCesaCopyToMbuf(cesaSramVirtPtr->buf[0], pCmd->pDst, pReq->frags.bufOffset, macDataSize);
+*/
+    pDigest = (mvCesaSramAddrGet() + pReq->frags.newDigestOffset);
+
+    macMode = (pSA->config & MV_CESA_MAC_MODE_MASK) >> MV_CESA_MAC_MODE_OFFSET;
+/*
+    mvOsPrintf("macDataSize=%d, macLength=%d, digestOffset=%d, macMode=%d\n",
+            macDataSize, pCmd->macLength, pCmd->digestOffset, macMode);
+*/
+    switch(macMode)
+    {
+        case MV_CESA_MAC_HMAC_MD5:
+            pOuterIV = pSA->pSramSA->macOuterIV;
+
+        case MV_CESA_MAC_MD5:
+            mvCesaFragMd5Complete(pCmd->pDst, pReq->frags.bufOffset, pOuterIV,
+                               macDataSize, pCmd->macLength, pDigest);
+        break;
+
+        case MV_CESA_MAC_HMAC_SHA1:
+            pOuterIV = pSA->pSramSA->macOuterIV;
+
+        case MV_CESA_MAC_SHA1:
+            mvCesaFragSha1Complete(pCmd->pDst, pReq->frags.bufOffset, pOuterIV,
+                               macDataSize, pCmd->macLength, pDigest);
+        break;
+
+        default:
+            mvOsPrintf("mvCesaFragAuthComplete: Unexpected macMode %d\n", macMode);
+            return MV_BAD_PARAM;
+    }
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvCesaCtrModeInit -
+*
+* DESCRIPTION:
+*
+*
+* INPUT: NONE
+*
+*
+* RETURN:
+*       MV_CESA_COMMAND*
+*
+*******************************************************************************/
+static MV_CESA_COMMAND*    mvCesaCtrModeInit(void)
+{
+    MV_CESA_MBUF    *pMbuf;
+    MV_U8           *pBuf;
+    MV_CESA_COMMAND *pCmd;
+
+    pBuf = mvOsMalloc(sizeof(MV_CESA_COMMAND) +
+                      sizeof(MV_CESA_MBUF) + sizeof(MV_BUF_INFO) + 100);
+    if(pBuf == NULL)
+    {
+        mvOsPrintf("mvCesaSessionOpen: Can't allocate %u bytes for CTR Mode\n",
+                    sizeof(MV_CESA_COMMAND) + sizeof(MV_CESA_MBUF) + sizeof(MV_BUF_INFO) );
+        return NULL;
+    }
+    pCmd = (MV_CESA_COMMAND*)pBuf;
+    pBuf += sizeof(MV_CESA_COMMAND);
+
+    pMbuf = (MV_CESA_MBUF*)pBuf;
+    pBuf += sizeof(MV_CESA_MBUF);
+
+    pMbuf->pFrags = (MV_BUF_INFO*)pBuf;
+
+    pMbuf->numFrags = 1;
+    pCmd->pSrc = pMbuf;
+    pCmd->pDst = pMbuf;
+/*
+    mvOsPrintf("CtrModeInit: pCmd=%p, pSrc=%p, pDst=%p, pFrags=%p\n",
+                pCmd, pCmd->pSrc, pCmd->pDst,
+                pMbuf->pFrags);
+*/
+    return pCmd;
+}
+
+/*******************************************************************************
+* mvCesaCtrModePrepare -
+*
+* DESCRIPTION:
+*
+*
+* INPUT:
+*       MV_CESA_COMMAND *pCtrModeCmd, MV_CESA_COMMAND *pCmd
+*
+* RETURN:
+*       MV_STATUS
+*
+*******************************************************************************/
+static MV_STATUS    mvCesaCtrModePrepare(MV_CESA_COMMAND *pCtrModeCmd, MV_CESA_COMMAND *pCmd)
+{
+    MV_CESA_MBUF    *pMbuf;
+    MV_U8           *pBuf, *pIV;
+    MV_U32          counter, *pCounter;
+    int             cryptoSize = MV_ALIGN_UP(pCmd->cryptoLength, MV_CESA_AES_BLOCK_SIZE);
+/*
+    mvOsPrintf("CtrModePrepare: pCmd=%p, pCtrSrc=%p, pCtrDst=%p, pOrgCmd=%p, pOrgSrc=%p, pOrgDst=%p\n",
+                pCmd, pCmd->pSrc, pCmd->pDst,
+                pCtrModeCmd, pCtrModeCmd->pSrc, pCtrModeCmd->pDst);
+*/
+    pMbuf = pCtrModeCmd->pSrc;
+
+    /* Allocate buffer for Key stream */
+    pBuf = mvOsIoCachedMalloc(cesaOsHandle,cryptoSize, 
+			      &pMbuf->pFrags[0].bufPhysAddr,
+			      &pMbuf->pFrags[0].memHandle);
+    if(pBuf == NULL)
+    {
+        mvOsPrintf("mvCesaCtrModePrepare: Can't allocate %d bytes\n", cryptoSize);
+        return MV_OUT_OF_CPU_MEM;
+    }
+    memset(pBuf, 0, cryptoSize);
+    mvOsCacheFlush(NULL, pBuf, cryptoSize);
+
+    pMbuf->pFrags[0].bufVirtPtr = pBuf;
+    pMbuf->mbufSize = cryptoSize;
+    pMbuf->pFrags[0].bufSize = cryptoSize;
+
+    pCtrModeCmd->pReqPrv = pCmd->pReqPrv;
+    pCtrModeCmd->sessionId = pCmd->sessionId;
+
+    /* ivFromUser and ivOffset are don't care */
+    pCtrModeCmd->cryptoOffset = 0;
+    pCtrModeCmd->cryptoLength = cryptoSize;
+
+    /* digestOffset, macOffset and macLength are don't care */
+
+    mvCesaCopyFromMbuf(pBuf, pCmd->pSrc, pCmd->ivOffset, MV_CESA_AES_BLOCK_SIZE);
+    pCounter = (MV_U32*)(pBuf + (MV_CESA_AES_BLOCK_SIZE - sizeof(counter)));
+    counter = *pCounter;
+    counter = MV_32BIT_BE(counter);
+    pIV = pBuf;
+    cryptoSize -= MV_CESA_AES_BLOCK_SIZE;
+
+    /* fill key stream */
+    while(cryptoSize > 0)
+    {
+        pBuf += MV_CESA_AES_BLOCK_SIZE;
+        memcpy(pBuf, pIV, MV_CESA_AES_BLOCK_SIZE - sizeof(counter));
+        pCounter = (MV_U32*)(pBuf + (MV_CESA_AES_BLOCK_SIZE - sizeof(counter)));
+        counter++;
+        *pCounter = MV_32BIT_BE(counter);
+        cryptoSize -= MV_CESA_AES_BLOCK_SIZE;
+    }
+
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvCesaCtrModeComplete -
+*
+* DESCRIPTION:
+*
+*
+* INPUT:
+*       MV_CESA_COMMAND *pOrgCmd, MV_CESA_COMMAND *pCmd
+*
+* RETURN:
+*       MV_STATUS
+*
+*******************************************************************************/
+static MV_STATUS   mvCesaCtrModeComplete(MV_CESA_COMMAND *pOrgCmd, MV_CESA_COMMAND *pCmd)
+{
+    int         srcFrag, dstFrag, srcOffset, dstOffset, keyOffset, srcSize, dstSize;
+    int         cryptoSize = pCmd->cryptoLength;
+    MV_U8       *pSrc, *pDst, *pKey;
+    MV_STATUS   status = MV_OK;
+/*
+    mvOsPrintf("CtrModeComplete: pCmd=%p, pCtrSrc=%p, pCtrDst=%p, pOrgCmd=%p, pOrgSrc=%p, pOrgDst=%p\n",
+                pCmd, pCmd->pSrc, pCmd->pDst,
+                pOrgCmd, pOrgCmd->pSrc, pOrgCmd->pDst);
+*/
+    /* XOR source data with key stream to destination data */
+    pKey = pCmd->pDst->pFrags[0].bufVirtPtr;
+    keyOffset = 0;
+
+    if( (pOrgCmd->pSrc != pOrgCmd->pDst) &&
+        (pOrgCmd->cryptoOffset > 0) )
+    {
+        /* Copy Prefix from source buffer to destination buffer */
+
+        status = mvCesaMbufCopy(pOrgCmd->pDst, 0,
+                                pOrgCmd->pSrc, 0, pOrgCmd->cryptoOffset);
+/*
+        status = mvCesaCopyFromMbuf(tempBuf, pOrgCmd->pSrc,
+                       0, pOrgCmd->cryptoOffset);
+        status = mvCesaCopyToMbuf(tempBuf, pOrgCmd->pDst,
+                       0, pOrgCmd->cryptoOffset);
+*/
+    }
+
+    srcFrag = mvCesaMbufOffset(pOrgCmd->pSrc, pOrgCmd->cryptoOffset, &srcOffset);
+    pSrc = pOrgCmd->pSrc->pFrags[srcFrag].bufVirtPtr;
+    srcSize = pOrgCmd->pSrc->pFrags[srcFrag].bufSize;
+
+    dstFrag = mvCesaMbufOffset(pOrgCmd->pDst, pOrgCmd->cryptoOffset, &dstOffset);
+    pDst = pOrgCmd->pDst->pFrags[dstFrag].bufVirtPtr;
+    dstSize = pOrgCmd->pDst->pFrags[dstFrag].bufSize;
+
+    while(cryptoSize > 0)
+    {
+        pDst[dstOffset] = (pSrc[srcOffset] ^ pKey[keyOffset]);
+
+        cryptoSize--;
+        dstOffset++;
+        srcOffset++;
+        keyOffset++;
+
+        if(srcOffset >= srcSize)
+        {
+            srcFrag++;
+            srcOffset = 0;
+            pSrc = pOrgCmd->pSrc->pFrags[srcFrag].bufVirtPtr;
+            srcSize = pOrgCmd->pSrc->pFrags[srcFrag].bufSize;
+        }
+
+        if(dstOffset >= dstSize)
+        {
+            dstFrag++;
+            dstOffset = 0;
+            pDst = pOrgCmd->pDst->pFrags[dstFrag].bufVirtPtr;
+            dstSize = pOrgCmd->pDst->pFrags[dstFrag].bufSize;
+        }
+    }
+
+    if(pOrgCmd->pSrc != pOrgCmd->pDst)
+    {
+        /* Copy Suffix from source buffer to destination buffer */
+        srcOffset = pOrgCmd->cryptoOffset + pOrgCmd->cryptoLength;
+
+        if( (pOrgCmd->pDst->mbufSize - srcOffset) > 0)
+        {
+            status = mvCesaMbufCopy(pOrgCmd->pDst, srcOffset,
+                                    pOrgCmd->pSrc, srcOffset,
+                                    pOrgCmd->pDst->mbufSize - srcOffset);
+        }
+
+/*
+        status = mvCesaCopyFromMbuf(tempBuf, pOrgCmd->pSrc,
+                                srcOffset, pOrgCmd->pSrc->mbufSize - srcOffset);
+        status = mvCesaCopyToMbuf(tempBuf, pOrgCmd->pDst,
+                       srcOffset, pOrgCmd->pDst->mbufSize - srcOffset);
+*/
+    }
+
+    /* Free buffer used for Key stream */
+    mvOsIoCachedFree(cesaOsHandle,pCmd->pDst->pFrags[0].bufSize,
+		     pCmd->pDst->pFrags[0].bufPhysAddr,
+                     pCmd->pDst->pFrags[0].bufVirtPtr,
+		     pCmd->pDst->pFrags[0].memHandle);
+
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvCesaCtrModeFinish -
+*
+* DESCRIPTION:
+*
+*
+* INPUT:
+*       MV_CESA_COMMAND* pCmd
+*
+* RETURN:
+*       MV_STATUS
+*
+*******************************************************************************/
+static void    mvCesaCtrModeFinish(MV_CESA_COMMAND* pCmd)
+{
+    mvOsFree(pCmd);
+}
+
+/*******************************************************************************
+* mvCesaParamCheck -
+*
+* DESCRIPTION:
+*
+*
+* INPUT:
+*       MV_CESA_SA* pSA, MV_CESA_COMMAND *pCmd, MV_U8* pFixOffset
+*
+* RETURN:
+*       MV_STATUS
+*
+*******************************************************************************/
+static MV_STATUS   mvCesaParamCheck(MV_CESA_SA* pSA, MV_CESA_COMMAND *pCmd,
+                                    MV_U8* pFixOffset)
+{
+    MV_U8   fixOffset = 0xFF;
+
+    /* Check AUTH operation parameters */
+    if( ((pSA->config & MV_CESA_OPERATION_MASK) !=
+                (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET)) )
+    {
+        /* MAC offset should be at least 4 byte aligned */
+        if( MV_IS_NOT_ALIGN(pCmd->macOffset, 4) )
+        {
+            mvOsPrintf("mvCesaAction: macOffset %d must be 4 byte aligned\n",
+                    pCmd->macOffset);
+            return MV_BAD_PARAM;
+        }
+        /* Digest offset must be 4 byte aligned */
+        if( MV_IS_NOT_ALIGN(pCmd->digestOffset, 4) )
+        {
+            mvOsPrintf("mvCesaAction: digestOffset %d must be 4 byte aligned\n",
+                    pCmd->digestOffset);
+            return MV_BAD_PARAM;
+        }
+        /* In addition all offsets should be the same alignment: 8 or 4 */
+        if(fixOffset == 0xFF)
+        {
+            fixOffset = (pCmd->macOffset % 8);
+        }
+        else
+        {
+            if( (pCmd->macOffset % 8) != fixOffset)
+            {
+                mvOsPrintf("mvCesaAction: macOffset %d mod 8 must be equal %d\n",
+                                pCmd->macOffset, fixOffset);
+                return MV_BAD_PARAM;
+            }
+        }
+        if( (pCmd->digestOffset % 8) != fixOffset)
+        {
+            mvOsPrintf("mvCesaAction: digestOffset %d mod 8 must be equal %d\n",
+                                pCmd->digestOffset, fixOffset);
+            return MV_BAD_PARAM;
+        }
+    }
+    /* Check CRYPTO operation parameters */
+    if( ((pSA->config & MV_CESA_OPERATION_MASK) !=
+                (MV_CESA_MAC_ONLY << MV_CESA_OPERATION_OFFSET)) )
+    {
+        /* CryptoOffset should be at least 4 byte aligned */
+        if( MV_IS_NOT_ALIGN(pCmd->cryptoOffset, 4)  )
+        {
+            mvOsPrintf("CesaAction: cryptoOffset=%d must be 4 byte aligned\n",
+                        pCmd->cryptoOffset);
+            return MV_BAD_PARAM;
+        }
+        /* cryptoLength should be the whole number of blocks */
+        if( MV_IS_NOT_ALIGN(pCmd->cryptoLength, pSA->cryptoBlockSize) )
+        {
+            mvOsPrintf("mvCesaAction: cryptoLength=%d must be %d byte aligned\n",
+                        pCmd->cryptoLength, pSA->cryptoBlockSize);
+            return MV_BAD_PARAM;
+        }
+        if(fixOffset == 0xFF)
+        {
+            fixOffset = (pCmd->cryptoOffset % 8);
+        }
+        else
+        {
+            /* In addition all offsets should be the same alignment: 8 or 4 */
+            if( (pCmd->cryptoOffset % 8) != fixOffset)
+            {
+                mvOsPrintf("mvCesaAction: cryptoOffset %d mod 8 must be equal %d \n",
+                                pCmd->cryptoOffset, fixOffset);
+                return MV_BAD_PARAM;
+            }
+        }
+
+        /* check for CBC mode */
+        if(pSA->cryptoIvSize > 0)
+        {
+            /* cryptoIV must not be part of CryptoLength */
+            if( ((pCmd->ivOffset + pSA->cryptoIvSize) > pCmd->cryptoOffset) &&
+                (pCmd->ivOffset < (pCmd->cryptoOffset + pCmd->cryptoLength)) )
+            {
+                mvOsPrintf("mvCesaFragParamCheck: cryptoIvOffset (%d) is part of cryptoLength (%d+%d)\n",
+                        pCmd->ivOffset, pCmd->macOffset, pCmd->macLength);
+                return MV_BAD_PARAM;
+            }
+
+            /* ivOffset must be 4 byte aligned */
+            if( MV_IS_NOT_ALIGN(pCmd->ivOffset, 4) )
+            {
+                mvOsPrintf("CesaAction: ivOffset=%d must be 4 byte aligned\n",
+                            pCmd->ivOffset);
+                return MV_BAD_PARAM;
+            }
+            /* In addition all offsets should be the same alignment: 8 or 4 */
+            if( (pCmd->ivOffset % 8) != fixOffset)
+            {
+                mvOsPrintf("mvCesaAction: ivOffset %d mod 8 must be %d\n",
+                                pCmd->ivOffset, fixOffset);
+                return MV_BAD_PARAM;
+            }
+        }
+    }
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvCesaFragParamCheck -
+*
+* DESCRIPTION:
+*
+*
+* INPUT:
+*       MV_CESA_SA* pSA, MV_CESA_COMMAND *pCmd
+*
+* RETURN:
+*       MV_STATUS
+*
+*******************************************************************************/
+static MV_STATUS   mvCesaFragParamCheck(MV_CESA_SA* pSA, MV_CESA_COMMAND *pCmd)
+{
+    int     offset;
+
+    if( ((pSA->config & MV_CESA_OPERATION_MASK) !=
+                (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET)) )
+    {
+        /* macOffset must be less that SRAM buffer size */
+        if(pCmd->macOffset > (sizeof(cesaSramVirtPtr->buf) - MV_CESA_AUTH_BLOCK_SIZE))
+        {
+            mvOsPrintf("mvCesaFragParamCheck: macOffset is too large (%d)\n",
+                        pCmd->macOffset);
+            return MV_BAD_PARAM;
+        }
+        /* macOffset+macSize must be more than mbufSize - SRAM buffer size */
+        if( ((pCmd->macOffset + pCmd->macLength) > pCmd->pSrc->mbufSize) ||
+            ((pCmd->pSrc->mbufSize - (pCmd->macOffset + pCmd->macLength)) >=
+             sizeof(cesaSramVirtPtr->buf)) )
+        {
+            mvOsPrintf("mvCesaFragParamCheck: macLength is too large (%d), mbufSize=%d\n",
+                        pCmd->macLength, pCmd->pSrc->mbufSize);
+            return MV_BAD_PARAM;
+        }
+    }
+
+    if( ((pSA->config & MV_CESA_OPERATION_MASK) !=
+                (MV_CESA_MAC_ONLY << MV_CESA_OPERATION_OFFSET)) )
+    {
+        /* cryptoOffset must be less that SRAM buffer size */
+        /* 4 for possible fixOffset */
+        if( (pCmd->cryptoOffset + 4) > (sizeof(cesaSramVirtPtr->buf) - pSA->cryptoBlockSize))
+        {
+            mvOsPrintf("mvCesaFragParamCheck: cryptoOffset is too large (%d)\n",
+                        pCmd->cryptoOffset);
+            return MV_BAD_PARAM;
+        }
+
+        /* cryptoOffset+cryptoSize must be more than mbufSize - SRAM buffer size */
+        if( ((pCmd->cryptoOffset + pCmd->cryptoLength) > pCmd->pSrc->mbufSize) ||
+            ((pCmd->pSrc->mbufSize - (pCmd->cryptoOffset + pCmd->cryptoLength)) >=
+             (sizeof(cesaSramVirtPtr->buf) - pSA->cryptoBlockSize)) )
+        {
+            mvOsPrintf("mvCesaFragParamCheck: cryptoLength is too large (%d), mbufSize=%d\n",
+                        pCmd->cryptoLength, pCmd->pSrc->mbufSize);
+            return MV_BAD_PARAM;
+        }
+    }
+
+    /* When MAC_THEN_CRYPTO or CRYPTO_THEN_MAC */
+    if( ((pSA->config & MV_CESA_OPERATION_MASK) ==
+            (MV_CESA_MAC_THEN_CRYPTO << MV_CESA_OPERATION_OFFSET)) ||
+        ((pSA->config & MV_CESA_OPERATION_MASK) ==
+            (MV_CESA_CRYPTO_THEN_MAC << MV_CESA_OPERATION_OFFSET)) )
+    {
+        if( (mvCtrlModelGet() == MV_5182_DEV_ID) ||
+            ( (mvCtrlModelGet() == MV_5181_DEV_ID) &&
+              (mvCtrlRevGet() >= MV_5181L_A0_REV)  &&
+              (pCmd->macLength >= (1 << 14)) ) )
+        {
+            return MV_NOT_ALLOWED;
+        }
+
+        /* abs(cryptoOffset-macOffset) must be aligned cryptoBlockSize */
+        if(pCmd->cryptoOffset > pCmd->macOffset)
+        {
+            offset = pCmd->cryptoOffset - pCmd->macOffset;
+        }
+        else
+        {
+            offset = pCmd->macOffset - pCmd->cryptoOffset;
+        }
+
+        if( MV_IS_NOT_ALIGN(offset,  pSA->cryptoBlockSize) )
+        {
+/*
+            mvOsPrintf("mvCesaFragParamCheck: (cryptoOffset - macOffset) must be %d byte aligned\n",
+                        pSA->cryptoBlockSize);
+*/
+            return MV_NOT_ALLOWED;
+        }
+        /* Digest must not be part of CryptoLength */
+        if( ((pCmd->digestOffset + pSA->digestSize) > pCmd->cryptoOffset) &&
+            (pCmd->digestOffset < (pCmd->cryptoOffset + pCmd->cryptoLength)) )
+        {
+/*
+            mvOsPrintf("mvCesaFragParamCheck: digestOffset (%d) is part of cryptoLength (%d+%d)\n",
+                        pCmd->digestOffset, pCmd->cryptoOffset, pCmd->cryptoLength);
+*/
+            return MV_NOT_ALLOWED;
+        }
+    }
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvCesaFragSizeFind -
+*
+* DESCRIPTION:
+*
+*
+* INPUT:
+*       MV_CESA_SA* pSA, MV_CESA_COMMAND *pCmd,
+*       int cryptoOffset, int macOffset,
+*
+* OUTPUT:
+*       int* pCopySize, int* pCryptoDataSize, int* pMacDataSize
+*
+* RETURN:
+*       MV_STATUS
+*
+*******************************************************************************/
+static void   mvCesaFragSizeFind(MV_CESA_SA* pSA, MV_CESA_REQ* pReq,
+                                 int cryptoOffset, int macOffset,
+                          int* pCopySize, int* pCryptoDataSize, int* pMacDataSize)
+{
+    MV_CESA_COMMAND *pCmd = pReq->pCmd;
+    int             cryptoDataSize, macDataSize, copySize;
+
+    cryptoDataSize = macDataSize = 0;
+    copySize = *pCopySize;
+
+    if( (pSA->config & MV_CESA_OPERATION_MASK) !=
+                (MV_CESA_MAC_ONLY << MV_CESA_OPERATION_OFFSET) )
+    {
+        cryptoDataSize = MV_MIN( (copySize - cryptoOffset),
+                                 (pCmd->cryptoLength - (pReq->frags.cryptoSize + 1)) );
+
+        /* cryptoSize for each fragment must be the whole number of blocksSize */
+        if( MV_IS_NOT_ALIGN(cryptoDataSize, pSA->cryptoBlockSize) )
+        {
+            cryptoDataSize = MV_ALIGN_DOWN(cryptoDataSize, pSA->cryptoBlockSize);
+            copySize = cryptoOffset + cryptoDataSize;
+        }
+    }
+    if( (pSA->config & MV_CESA_OPERATION_MASK) !=
+             (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET) )
+    {
+        macDataSize = MV_MIN( (copySize - macOffset),
+                              (pCmd->macLength - (pReq->frags.macSize + 1)));
+
+        /* macSize for each fragment (except last) must be the whole number of blocksSize */
+        if( MV_IS_NOT_ALIGN(macDataSize, MV_CESA_AUTH_BLOCK_SIZE) )
+        {
+            macDataSize = MV_ALIGN_DOWN(macDataSize, MV_CESA_AUTH_BLOCK_SIZE);
+            copySize = macOffset + macDataSize;
+        }
+        cryptoDataSize = copySize - cryptoOffset;
+    }
+    *pCopySize = copySize;
+
+    if(pCryptoDataSize != NULL)
+        *pCryptoDataSize = cryptoDataSize;
+
+    if(pMacDataSize != NULL)
+        *pMacDataSize = macDataSize;
+}
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvCesa.h b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvCesa.h
new file mode 100644
index 0000000000..115274ffee
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvCesa.h
@@ -0,0 +1,412 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED.  The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer.
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    *   Neither the name of Marvell nor the names of its contributors may be
+        used to endorse or promote products derived from this software without
+        specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+/*******************************************************************************
+* mvCesa.h - Header File for Cryptographic Engines and Security Accelerator
+*
+* DESCRIPTION:
+*       This header file contains macros typedefs and function declaration for
+*       the Marvell Cryptographic Engines and Security Accelerator.
+*
+*******************************************************************************/
+
+#ifndef __mvCesa_h__
+#define __mvCesa_h__
+
+#include "mvOs.h"
+#include "mvCommon.h"
+#include "mvDebug.h"
+
+#include "ctrlEnv/mvCtrlEnvSpec.h"
+
+#include "cesa/mvMD5.h"
+#include "cesa/mvSHA1.h"
+
+#include "cesa/mvCesa.h"
+#include "cesa/AES/mvAes.h"
+#include "mvSysHwConfig.h"
+
+#ifdef MV_INCLUDE_IDMA
+#include "idma/mvIdma.h"
+#include "idma/mvIdmaRegs.h"
+#else
+/* Redefine MV_DMA_DESC structure */
+typedef struct _mvDmaDesc
+{
+    MV_U32 	byteCnt;        /* The total number of bytes to transfer        */
+    MV_U32 	phySrcAdd;	    /* The physical source address                  */
+    MV_U32 	phyDestAdd;     /* The physical destination address             */
+    MV_U32	phyNextDescPtr; /* If we are using chain mode DMA transfer,     */
+				            /* then this pointer should point to the        */
+                            /* physical address of the next descriptor,     */
+                            /* otherwise it should be NULL.                 */
+}MV_DMA_DESC;
+#endif /* MV_INCLUDE_IDMA */
+
+#include "cesa/mvCesaRegs.h"
+
+#define MV_CESA_AUTH_BLOCK_SIZE         64 /* bytes */
+
+#define MV_CESA_MD5_DIGEST_SIZE         16 /* bytes */
+#define MV_CESA_SHA1_DIGEST_SIZE        20 /* bytes */
+
+#define MV_CESA_MAX_DIGEST_SIZE         MV_CESA_SHA1_DIGEST_SIZE
+
+#define MV_CESA_DES_KEY_LENGTH          8   /* bytes = 64 bits */
+#define MV_CESA_3DES_KEY_LENGTH         24  /* bytes = 192 bits */
+#define MV_CESA_AES_128_KEY_LENGTH      16  /* bytes = 128 bits */
+#define MV_CESA_AES_192_KEY_LENGTH      24  /* bytes = 192 bits */
+#define MV_CESA_AES_256_KEY_LENGTH      32  /* bytes = 256 bits */
+
+#define MV_CESA_MAX_CRYPTO_KEY_LENGTH   MV_CESA_AES_256_KEY_LENGTH
+
+#define MV_CESA_DES_BLOCK_SIZE          8 /* bytes = 64 bits */
+#define MV_CESA_3DES_BLOCK_SIZE         8 /* bytes = 64 bits */
+
+#define MV_CESA_AES_BLOCK_SIZE          16 /* bytes = 128 bits */
+
+#define MV_CESA_MAX_IV_LENGTH           MV_CESA_AES_BLOCK_SIZE
+
+#define MV_CESA_MAX_MAC_KEY_LENGTH      64 /* bytes */
+
+typedef struct
+{
+	MV_U8               cryptoKey[MV_CESA_MAX_CRYPTO_KEY_LENGTH];
+	MV_U8               macKey[MV_CESA_MAX_MAC_KEY_LENGTH];
+	MV_CESA_OPERATION   operation;
+	MV_CESA_DIRECTION   direction;
+	MV_CESA_CRYPTO_ALG  cryptoAlgorithm;
+	MV_CESA_CRYPTO_MODE cryptoMode;
+   	MV_U8               cryptoKeyLength;
+	MV_CESA_MAC_MODE    macMode;
+	MV_U8               macKeyLength;
+	MV_U8               digestSize;
+
+} MV_CESA_OPEN_SESSION;
+
+typedef struct
+{
+    MV_BUF_INFO *pFrags;
+	MV_U16	    numFrags;
+    MV_U16      mbufSize;
+
+} MV_CESA_MBUF;
+
+typedef struct
+{
+    void* 	pReqPrv; /* instead of reqId */
+    MV_U32 	retCode;
+    MV_16   sessionId;
+
+} MV_CESA_RESULT;
+
+typedef void    (*MV_CESA_CALLBACK) (MV_CESA_RESULT* pResult);
+
+
+typedef struct
+{
+    void*               pReqPrv;    /* instead of reqId */
+    MV_CESA_MBUF*       pSrc;
+    MV_CESA_MBUF*       pDst;
+    MV_CESA_CALLBACK*   pFuncCB;
+    MV_16               sessionId;
+    MV_U16              ivFromUser;
+    MV_U16              ivOffset;
+    MV_U16              cryptoOffset;
+    MV_U16              cryptoLength;
+    MV_U16              digestOffset;
+    MV_U16              macOffset;
+    MV_U16              macLength;
+    MV_BOOL		skipFlush;
+} MV_CESA_COMMAND;
+
+
+
+MV_STATUS   mvCesaHalInit (int numOfSession, int queueDepth, char* pSramBase, MV_U32 cryptEngBase, void *osHandle);
+MV_STATUS   mvCesaFinish (void);
+MV_STATUS   mvCesaSessionOpen(MV_CESA_OPEN_SESSION *pSession, short* pSid);
+MV_STATUS   mvCesaSessionClose(short sid);
+MV_STATUS   mvCesaCryptoIvSet(MV_U8* pIV, int ivSize);
+
+MV_STATUS   mvCesaAction (MV_CESA_COMMAND* pCmd);
+
+MV_U32      mvCesaInProcessGet(void);
+MV_STATUS   mvCesaReadyDispatch(void);
+MV_STATUS   mvCesaReadyGet(MV_CESA_RESULT* pResult);
+MV_BOOL     mvCesaIsReady(void);
+
+int     	mvCesaMbufOffset(MV_CESA_MBUF* pMbuf, int offset, int* pBufOffset);
+MV_STATUS   mvCesaCopyFromMbuf(MV_U8* pDst, MV_CESA_MBUF* pSrcMbuf,
+                               int offset, int size);
+MV_STATUS   mvCesaCopyToMbuf(MV_U8* pSrc, MV_CESA_MBUF* pDstMbuf,
+                               int offset, int size);
+MV_STATUS   mvCesaMbufCopy(MV_CESA_MBUF* pMbufDst, int dstMbufOffset,
+                           MV_CESA_MBUF* pMbufSrc, int srcMbufOffset, int size);
+
+/********** Debug functions ********/
+
+void        mvCesaDebugMbuf(const char* str, MV_CESA_MBUF *pMbuf, int offset, int size);
+void        mvCesaDebugSA(short sid, int mode);
+void        mvCesaDebugStats(void);
+void        mvCesaDebugStatsClear(void);
+void        mvCesaDebugRegs(void);
+void        mvCesaDebugStatus(void);
+void        mvCesaDebugQueue(int mode);
+void        mvCesaDebugSram(int mode);
+void        mvCesaDebugSAD(int mode);
+
+
+/********  CESA Private definitions ********/
+#if (MV_CESA_VERSION >= 2)
+#if (MV_CACHE_COHERENCY  == MV_CACHE_COHER_SW)
+#define MV_CESA_TDMA_CTRL_VALUE       MV_CESA_TDMA_DST_BURST_MASK(MV_CESA_TDMA_BURST_128B) \
+                                    | MV_CESA_TDMA_SRC_BURST_MASK(MV_CESA_TDMA_BURST_128B) \
+                                    | MV_CESA_TDMA_OUTSTAND_READ_EN_MASK                   \
+				    | MV_CESA_TDMA_NO_BYTE_SWAP_MASK			   \
+                                    | MV_CESA_TDMA_ENABLE_MASK
+#else
+#define MV_CESA_TDMA_CTRL_VALUE       MV_CESA_TDMA_DST_BURST_MASK(MV_CESA_TDMA_BURST_32B)  \
+                                    | MV_CESA_TDMA_SRC_BURST_MASK(MV_CESA_TDMA_BURST_128B) \
+                                    /*| MV_CESA_TDMA_OUTSTAND_READ_EN_MASK                   */\
+                                    | MV_CESA_TDMA_ENABLE_MASK
+
+#endif
+#else
+#define MV_CESA_IDMA_CTRL_LOW_VALUE   ICCLR_DST_BURST_LIM_128BYTE   \
+                                    | ICCLR_SRC_BURST_LIM_128BYTE   \
+                                    | ICCLR_INT_MODE_MASK           \
+                                    | ICCLR_BLOCK_MODE              \
+                                    | ICCLR_CHAN_ENABLE             \
+                                    | ICCLR_DESC_MODE_16M
+#endif /* MV_CESA_VERSION >= 2 */
+
+#define MV_CESA_MAX_PKT_SIZE        (64 * 1024)
+#define MV_CESA_MAX_MBUF_FRAGS      20
+
+#define MV_CESA_MAX_REQ_FRAGS       ( (MV_CESA_MAX_PKT_SIZE / MV_CESA_MAX_BUF_SIZE) + 1)
+
+#define MV_CESA_MAX_DMA_DESC    (MV_CESA_MAX_MBUF_FRAGS*2 + 5)
+
+#define MAX_CESA_CHAIN_LENGTH	20
+
+typedef enum
+{
+    MV_CESA_IDLE     = 0,
+    MV_CESA_PENDING,
+    MV_CESA_PROCESS,
+    MV_CESA_READY,
+#if (MV_CESA_VERSION >= 3)
+    MV_CESA_CHAIN,
+#endif
+} MV_CESA_STATE;
+
+
+/* Session database */
+
+/* Map of Key materials of the session in SRAM.
+ * Each field must be 8 byte aligned
+ * Total size: 32 + 24 + 24 = 80 bytes
+ */
+typedef struct
+{
+    MV_U8  cryptoKey[MV_CESA_MAX_CRYPTO_KEY_LENGTH];
+    MV_U8  macInnerIV[MV_CESA_MAX_DIGEST_SIZE];
+    MV_U8  reservedInner[4];
+    MV_U8  macOuterIV[MV_CESA_MAX_DIGEST_SIZE];
+    MV_U8  reservedOuter[4];
+
+} MV_CESA_SRAM_SA;
+
+typedef struct
+{
+    MV_CESA_SRAM_SA*    pSramSA;
+    MV_U32              config;
+    MV_U8               cryptoKeyLength;
+    MV_U8               cryptoIvSize;
+    MV_U8               cryptoBlockSize;
+    MV_U8               digestSize;
+    MV_U8               macKeyLength;
+    MV_U8               valid;
+    MV_U8               ctrMode;
+    MV_U32              count;
+
+} MV_CESA_SA;
+
+/* DMA list management */
+typedef struct
+{
+    MV_DMA_DESC*    pDmaFirst;
+    MV_DMA_DESC*    pDmaLast;
+
+} MV_CESA_DMA;
+
+
+typedef struct
+{
+    MV_U8               numFrag;
+    MV_U8               nextFrag;
+    int                 bufOffset;
+    int                 cryptoSize;
+    int                 macSize;
+    int                 newDigestOffset;
+    MV_U8               orgDigest[MV_CESA_MAX_DIGEST_SIZE];
+
+} MV_CESA_FRAGS;
+
+/* Request queue */
+typedef struct
+{
+    MV_U8               state;
+    MV_U8               fragMode;
+    MV_U8               fixOffset;
+    MV_CESA_COMMAND*    pCmd;
+    MV_CESA_COMMAND*    pOrgCmd;
+    MV_BUF_INFO         dmaDescBuf;
+    MV_CESA_DMA         dma[MV_CESA_MAX_REQ_FRAGS];
+    MV_BUF_INFO         cesaDescBuf;
+    MV_CESA_DESC*       pCesaDesc;
+    MV_CESA_FRAGS       frags;
+
+
+} MV_CESA_REQ;
+
+
+/* SRAM map */
+/* Total SRAM size calculation */
+/*  SRAM size =
+ *              MV_CESA_MAX_BUF_SIZE  +
+ *              sizeof(MV_CESA_DESC)  +
+ *              MV_CESA_MAX_IV_LENGTH +
+ *              MV_CESA_MAX_IV_LENGTH +
+ *              MV_CESA_MAX_DIGEST_SIZE +
+ *              sizeof(MV_CESA_SRAM_SA)
+ *            = 1600 + 32 + 16 + 16 + 24 + 80 + 280 (reserved) = 2048 bytes
+ *            = 3200 + 32 + 16 + 16 + 24 + 80 + 728 (reserved) = 4096 bytes
+ */
+typedef struct
+{
+    MV_U8               buf[MV_CESA_MAX_BUF_SIZE];
+    MV_CESA_DESC        desc;
+    MV_U8               cryptoIV[MV_CESA_MAX_IV_LENGTH];
+    MV_U8               tempCryptoIV[MV_CESA_MAX_IV_LENGTH];
+    MV_U8               tempDigest[MV_CESA_MAX_DIGEST_SIZE+4];
+    MV_CESA_SRAM_SA     sramSA;
+
+} MV_CESA_SRAM_MAP;
+
+
+typedef struct
+{
+    MV_U32  openedCount;
+    MV_U32  closedCount;
+    MV_U32  fragCount;
+    MV_U32  reqCount;
+    MV_U32  maxReqCount;
+    MV_U32  procCount;
+    MV_U32  readyCount;
+    MV_U32  notReadyCount;
+    MV_U32  startCount;
+#if (MV_CESA_VERSION >= 3)
+    MV_U32  maxChainUsage;
+#endif
+
+} MV_CESA_STATS;
+
+
+/* External variables */
+
+extern MV_CESA_STATS    cesaStats;
+extern MV_CESA_FRAGS    cesaFrags;
+
+extern MV_BUF_INFO      cesaSramSaBuf;
+
+extern MV_CESA_SA*       pCesaSAD;
+extern MV_U16            cesaMaxSA;
+
+extern MV_CESA_REQ*      pCesaReqFirst;
+extern MV_CESA_REQ*      pCesaReqLast;
+extern MV_CESA_REQ*      pCesaReqEmpty;
+extern MV_CESA_REQ*      pCesaReqProcess;
+extern int               cesaQueueDepth;
+extern int               cesaReqResources;
+#if (MV_CESA_VERSION>= 3)
+extern MV_U32		cesaChainLength;
+#endif
+
+extern MV_CESA_SRAM_MAP*  cesaSramVirtPtr;
+extern MV_U32           cesaSramPhysAddr;
+
+static INLINE MV_ULONG  mvCesaVirtToPhys(MV_BUF_INFO* pBufInfo, void* pVirt)
+{
+    return (pBufInfo->bufPhysAddr + ((MV_U8*)pVirt - pBufInfo->bufVirtPtr));
+}
+
+/* Additional DEBUG functions */
+void        mvCesaDebugSramSA(MV_CESA_SRAM_SA* pSramSA, int mode);
+void        mvCesaDebugCmd(MV_CESA_COMMAND* pCmd,  int mode);
+void        mvCesaDebugDescriptor(MV_CESA_DESC* pDesc);
+
+
+
+#endif /* __mvCesa_h__ */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvCesaDebug.c b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvCesaDebug.c
new file mode 100644
index 0000000000..31b78a8053
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvCesaDebug.c
@@ -0,0 +1,484 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED.  The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+        this list of conditions and the following disclaimer.
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    *   Neither the name of Marvell nor the names of its contributors may be
+        used to endorse or promote products derived from this software without
+        specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "mvOs.h"
+#include "mvDebug.h"
+
+#include "cesa/mvMD5.h"
+#include "cesa/mvSHA1.h"
+
+#include "cesa/mvCesa.h"
+#include "cesa/mvCesaRegs.h"
+#include "cesa/AES/mvAes.h"
+
+static const char*   mvCesaDebugStateStr(MV_CESA_STATE state)
+{
+    switch(state)
+    {
+        case MV_CESA_IDLE:
+            return "Idle";
+
+        case MV_CESA_PENDING:
+            return "Pend";
+
+        case MV_CESA_PROCESS:
+            return "Proc";
+
+        case MV_CESA_READY:
+            return "Ready";
+
+        default:
+            break;
+    }
+    return "Unknown";
+}
+
+static const char*   mvCesaDebugOperStr(MV_CESA_OPERATION oper)
+{
+    switch(oper)
+    {
+        case MV_CESA_MAC_ONLY:
+            return "MacOnly";
+
+        case MV_CESA_CRYPTO_ONLY:
+            return "CryptoOnly";
+
+        case MV_CESA_MAC_THEN_CRYPTO:
+            return "MacCrypto";
+
+        case MV_CESA_CRYPTO_THEN_MAC:
+            return "CryptoMac";
+
+        default:
+            break;
+    }
+    return "Null";
+}
+
+static const char* mvCesaDebugCryptoAlgStr(MV_CESA_CRYPTO_ALG cryptoAlg)
+{
+    switch(cryptoAlg)
+    {
+        case MV_CESA_CRYPTO_DES:
+            return "DES";
+
+        case MV_CESA_CRYPTO_3DES:
+            return "3DES";
+
+        case MV_CESA_CRYPTO_AES:
+            return "AES";
+
+        default:
+            break;
+    }
+    return "Null";
+}
+
+static const char* mvCesaDebugMacModeStr(MV_CESA_MAC_MODE macMode)
+{
+    switch(macMode)
+    {
+        case MV_CESA_MAC_MD5:
+            return "MD5";
+
+        case MV_CESA_MAC_SHA1:
+            return "SHA1";
+
+        case MV_CESA_MAC_HMAC_MD5:
+            return "HMAC-MD5";
+
+        case MV_CESA_MAC_HMAC_SHA1:
+            return "HMAC_SHA1";
+
+        default:
+            break;
+    }
+    return "Null";
+}
+
+void    mvCesaDebugCmd(MV_CESA_COMMAND* pCmd,  int mode)
+{
+    mvOsPrintf("pCmd=%p, pReqPrv=%p, pSrc=%p, pDst=%p, pCB=%p, sid=%d\n",
+                pCmd, pCmd->pReqPrv, pCmd->pSrc, pCmd->pDst,
+                pCmd->pFuncCB, pCmd->sessionId);
+    mvOsPrintf("isUser=%d, ivOffs=%d, crOffs=%d, crLen=%d, digest=%d, macOffs=%d, macLen=%d\n",
+                pCmd->ivFromUser, pCmd->ivOffset, pCmd->cryptoOffset, pCmd->cryptoLength,
+                pCmd->digestOffset, pCmd->macOffset, pCmd->macLength);
+}
+
+/* no need to use in tool */
+void     mvCesaDebugMbuf(const char* str, MV_CESA_MBUF *pMbuf, int offset, int size)
+{
+    int frag, len, fragOffset;
+
+    if(str != NULL)
+        mvOsPrintf("%s: pMbuf=%p, numFrags=%d, mbufSize=%d\n",
+                    str, pMbuf, pMbuf->numFrags, pMbuf->mbufSize);
+
+    frag = mvCesaMbufOffset(pMbuf, offset, &fragOffset);
+    if(frag == MV_INVALID)
+    {
+        mvOsPrintf("CESA Mbuf Error: offset (%d) out of range\n", offset);
+        return;
+    }
+
+    for(; frag<pMbuf->numFrags; frag++)
+    {
+        mvOsPrintf("#%2d. bufVirt=%p, bufSize=%d\n",
+                    frag, pMbuf->pFrags[frag].bufVirtPtr,
+                    pMbuf->pFrags[frag].bufSize);
+        if(size > 0)
+        {
+            len = MV_MIN(pMbuf->pFrags[frag].bufSize, size);
+            mvDebugMemDump(pMbuf->pFrags[frag].bufVirtPtr+fragOffset, len, 1);
+            size -= len;
+            fragOffset = 0;
+        }
+    }
+}
+
+void    mvCesaDebugRegs(void)
+{
+    mvOsPrintf("\t CESA Registers:\n");
+
+    mvOsPrintf("MV_CESA_CMD_REG                     : 0x%X = 0x%08x\n",
+                MV_CESA_CMD_REG,
+                MV_REG_READ( MV_CESA_CMD_REG ) );
+
+    mvOsPrintf("MV_CESA_CHAN_DESC_OFFSET_REG        : 0x%X = 0x%08x\n",
+                MV_CESA_CHAN_DESC_OFFSET_REG,
+                MV_REG_READ(MV_CESA_CHAN_DESC_OFFSET_REG) );
+
+    mvOsPrintf("MV_CESA_CFG_REG                     : 0x%X = 0x%08x\n",
+                MV_CESA_CFG_REG,
+                MV_REG_READ( MV_CESA_CFG_REG ) );
+
+    mvOsPrintf("MV_CESA_STATUS_REG                  : 0x%X = 0x%08x\n",
+                MV_CESA_STATUS_REG,
+                MV_REG_READ( MV_CESA_STATUS_REG ) );
+
+    mvOsPrintf("MV_CESA_ISR_CAUSE_REG               : 0x%X = 0x%08x\n",
+                MV_CESA_ISR_CAUSE_REG,
+                MV_REG_READ( MV_CESA_ISR_CAUSE_REG ) );
+
+    mvOsPrintf("MV_CESA_ISR_MASK_REG                : 0x%X = 0x%08x\n",
+                MV_CESA_ISR_MASK_REG,
+                MV_REG_READ( MV_CESA_ISR_MASK_REG ) );
+#if (MV_CESA_VERSION >= 2)
+    mvOsPrintf("MV_CESA_TDMA_CTRL_REG               : 0x%X = 0x%08x\n", 
+                MV_CESA_TDMA_CTRL_REG, 
+                MV_REG_READ( MV_CESA_TDMA_CTRL_REG ) );
+
+    mvOsPrintf("MV_CESA_TDMA_BYTE_COUNT_REG         : 0x%X = 0x%08x\n", 
+                MV_CESA_TDMA_BYTE_COUNT_REG, 
+                MV_REG_READ( MV_CESA_TDMA_BYTE_COUNT_REG ) );
+
+    mvOsPrintf("MV_CESA_TDMA_SRC_ADDR_REG           : 0x%X = 0x%08x\n", 
+                MV_CESA_TDMA_SRC_ADDR_REG, 
+                MV_REG_READ( MV_CESA_TDMA_SRC_ADDR_REG ) );
+
+    mvOsPrintf("MV_CESA_TDMA_DST_ADDR_REG           : 0x%X = 0x%08x\n", 
+                MV_CESA_TDMA_DST_ADDR_REG, 
+                MV_REG_READ( MV_CESA_TDMA_DST_ADDR_REG ) );
+
+    mvOsPrintf("MV_CESA_TDMA_NEXT_DESC_PTR_REG      : 0x%X = 0x%08x\n", 
+                MV_CESA_TDMA_NEXT_DESC_PTR_REG, 
+                MV_REG_READ( MV_CESA_TDMA_NEXT_DESC_PTR_REG ) );
+
+    mvOsPrintf("MV_CESA_TDMA_CURR_DESC_PTR_REG      : 0x%X = 0x%08x\n", 
+                MV_CESA_TDMA_CURR_DESC_PTR_REG, 
+                MV_REG_READ( MV_CESA_TDMA_CURR_DESC_PTR_REG ) );
+
+    mvOsPrintf("MV_CESA_TDMA_ERROR_CAUSE_REG        : 0x%X = 0x%08x\n", 
+                MV_CESA_TDMA_ERROR_CAUSE_REG, 
+                MV_REG_READ( MV_CESA_TDMA_ERROR_CAUSE_REG ) );
+
+    mvOsPrintf("MV_CESA_TDMA_ERROR_MASK_REG         : 0x%X = 0x%08x\n", 
+                MV_CESA_TDMA_ERROR_MASK_REG, 
+                MV_REG_READ( MV_CESA_TDMA_ERROR_CAUSE_REG ) );
+
+#endif
+}
+
+void    mvCesaDebugStatus(void)
+{
+    mvOsPrintf("\n\t CESA Status\n\n");
+
+    mvOsPrintf("pReqQ=%p, qDepth=%d, reqSize=%ld bytes, qRes=%d, ",
+                pCesaReqFirst, cesaQueueDepth, sizeof(MV_CESA_REQ),
+                cesaReqResources);
+#if (MV_CESA_VERSION >= 3)
+    mvOsPrintf("chainLength=%u\n",cesaChainLength);
+#else
+   mvOsPrintf("\n"); 	
+#endif
+
+    mvOsPrintf("pSAD=%p, maxSA=%d, sizeSA=%ld bytes\n",
+                pCesaSAD, cesaMaxSA, sizeof(MV_CESA_SA));
+
+    mvOsPrintf("\n");
+
+    mvCesaDebugRegs();
+    mvCesaDebugStats();
+    mvCesaDebugStatsClear();
+}
+
+void    mvCesaDebugDescriptor(MV_CESA_DESC* pDesc)
+{
+    mvOsPrintf("config=0x%08x, crSrcOffs=0x%04x, crDstOffs=0x%04x\n",
+            pDesc->config, pDesc->cryptoSrcOffset, pDesc->cryptoDstOffset);
+
+    mvOsPrintf("crLen=0x%04x, crKeyOffs=0x%04x, ivOffs=0x%04x, ivBufOffs=0x%04x\n",
+            pDesc->cryptoDataLen, pDesc->cryptoKeyOffset,
+            pDesc->cryptoIvOffset, pDesc->cryptoIvBufOffset);
+
+    mvOsPrintf("macSrc=0x%04x, digest=0x%04x, macLen=0x%04x, inIv=0x%04x, outIv=0x%04x\n",
+            pDesc->macSrcOffset, pDesc->macDigestOffset, pDesc->macDataLen,
+            pDesc->macInnerIvOffset, pDesc->macOuterIvOffset);
+}
+
+void    mvCesaDebugQueue(int mode)
+{
+    mvOsPrintf("\n\t CESA Request Queue:\n\n");
+
+    mvOsPrintf("pFirstReq=%p, pLastReq=%p, qDepth=%d, reqSize=%ld bytes\n",
+                pCesaReqFirst, pCesaReqLast, cesaQueueDepth, sizeof(MV_CESA_REQ));
+
+    mvOsPrintf("pEmpty=%p, pProcess=%p, qResources=%d\n",
+                pCesaReqEmpty, pCesaReqProcess,
+                cesaReqResources);
+
+    if(mode != 0)
+    {
+        int             count = 0;
+        MV_CESA_REQ*    pReq = pCesaReqFirst;
+
+        for(count=0; count<cesaQueueDepth; count++)
+        {
+            /* Print out requsts */
+            mvOsPrintf("%02d. pReq=%p, state=%s, frag=0x%x, pCmd=%p, pDma=%p, pDesc=%p\n",
+                count, pReq, mvCesaDebugStateStr(pReq->state),
+                pReq->fragMode, pReq->pCmd, pReq->dma[0].pDmaFirst, &pReq->pCesaDesc[0]);
+            if(pReq->fragMode != MV_CESA_FRAG_NONE)
+            {
+                int frag;
+
+                mvOsPrintf("pFrags=%p, num=%d, next=%d, bufOffset=%d, cryptoSize=%d, macSize=%d\n",
+                            &pReq->frags, pReq->frags.numFrag, pReq->frags.nextFrag,
+                            pReq->frags.bufOffset, pReq->frags.cryptoSize, pReq->frags.macSize);
+                for(frag=0; frag<pReq->frags.numFrag; frag++)
+                {
+                    mvOsPrintf("#%d: pDmaFirst=%p, pDesc=%p\n", frag,
+                                pReq->dma[frag].pDmaFirst, &pReq->pCesaDesc[frag]);
+                }
+            }
+            if(mode > 1)
+            {
+                /* Print out Command */
+                mvCesaDebugCmd(pReq->pCmd, mode);
+
+                /* Print out Descriptor */
+                mvCesaDebugDescriptor(&pReq->pCesaDesc[0]);
+            }
+            pReq++;
+        }
+    }
+}
+
+
+void    mvCesaDebugSramSA(MV_CESA_SRAM_SA* pSramSA, int mode)
+{
+    if(pSramSA == NULL)
+    {
+        mvOsPrintf("cesaSramSA: Unexpected pSramSA=%p\n", pSramSA);
+        return;
+    }
+    mvOsPrintf("pSramSA=%p, sizeSramSA=%ld bytes\n",
+                pSramSA, sizeof(MV_CESA_SRAM_SA));
+
+    if(mode != 0)
+    {
+        mvOsPrintf("cryptoKey=%p, maxCryptoKey=%d bytes\n",
+                    pSramSA->cryptoKey, MV_CESA_MAX_CRYPTO_KEY_LENGTH);
+        mvDebugMemDump(pSramSA->cryptoKey, MV_CESA_MAX_CRYPTO_KEY_LENGTH, 1);
+
+        mvOsPrintf("macInnerIV=%p, maxInnerIV=%d bytes\n",
+                    pSramSA->macInnerIV, MV_CESA_MAX_DIGEST_SIZE);
+        mvDebugMemDump(pSramSA->macInnerIV, MV_CESA_MAX_DIGEST_SIZE, 1);
+
+        mvOsPrintf("macOuterIV=%p, maxOuterIV=%d bytes\n",
+                    pSramSA->macOuterIV, MV_CESA_MAX_DIGEST_SIZE);
+        mvDebugMemDump(pSramSA->macOuterIV, MV_CESA_MAX_DIGEST_SIZE, 1);
+    }
+}
+
+void    mvCesaDebugSA(short sid, int mode)
+{
+    MV_CESA_OPERATION   oper;
+    MV_CESA_DIRECTION   dir;
+    MV_CESA_CRYPTO_ALG  cryptoAlg;
+    MV_CESA_CRYPTO_MODE cryptoMode;
+    MV_CESA_MAC_MODE    macMode;
+    MV_CESA_SA*         pSA = &pCesaSAD[sid];
+
+    if( (pSA->valid) || ((pSA->count != 0) && (mode > 0)) || (mode >= 2) )
+    {
+        mvOsPrintf("\n\nCESA SA Entry #%d (%p) - %s (count=%d)\n",
+                    sid, pSA,
+                    pSA->valid ? "Valid" : "Invalid", pSA->count);
+
+        oper = (pSA->config & MV_CESA_OPERATION_MASK) >> MV_CESA_OPERATION_OFFSET;
+        dir  = (pSA->config & MV_CESA_DIRECTION_MASK) >> MV_CESA_DIRECTION_BIT;
+        mvOsPrintf("%s - %s ", mvCesaDebugOperStr(oper),
+                    (dir == MV_CESA_DIR_ENCODE) ? "Encode" : "Decode");
+        if(oper != MV_CESA_MAC_ONLY)
+        {
+            cryptoAlg = (pSA->config & MV_CESA_CRYPTO_ALG_MASK) >> MV_CESA_CRYPTO_ALG_OFFSET;
+            cryptoMode = (pSA->config & MV_CESA_CRYPTO_MODE_MASK) >> MV_CESA_CRYPTO_MODE_BIT;
+            mvOsPrintf("- %s - %s ", mvCesaDebugCryptoAlgStr(cryptoAlg),
+                        (cryptoMode == MV_CESA_CRYPTO_ECB) ? "ECB" : "CBC");
+        }
+        if(oper != MV_CESA_CRYPTO_ONLY)
+        {
+            macMode = (pSA->config & MV_CESA_MAC_MODE_MASK) >> MV_CESA_MAC_MODE_OFFSET;
+            mvOsPrintf("- %s ", mvCesaDebugMacModeStr(macMode));
+        }
+        mvOsPrintf("\n");
+
+        if(mode > 0)
+        {
+            mvOsPrintf("config=0x%08x, cryptoKeySize=%d, digestSize=%d\n",
+                        pCesaSAD[sid].config, pCesaSAD[sid].cryptoKeyLength,
+                        pCesaSAD[sid].digestSize);
+
+            mvCesaDebugSramSA(pCesaSAD[sid].pSramSA, mode);
+        }
+    }
+}
+
+
+/**/
+void    mvCesaDebugSram(int mode)
+{
+    mvOsPrintf("\n\t SRAM contents: size=%ld, pVirt=%p\n\n",
+            sizeof(MV_CESA_SRAM_MAP), cesaSramVirtPtr);
+
+    mvOsPrintf("\n\t Sram buffer: size=%d, pVirt=%p\n",
+                    MV_CESA_MAX_BUF_SIZE, cesaSramVirtPtr->buf);
+        if(mode != 0)
+            mvDebugMemDump(cesaSramVirtPtr->buf, 64, 1);
+
+    mvOsPrintf("\n");
+    mvOsPrintf("\n\t Sram descriptor: size=%ld, pVirt=%p\n",
+                    sizeof(MV_CESA_DESC), &cesaSramVirtPtr->desc);
+    if(mode != 0)
+    {
+        mvOsPrintf("\n");
+        mvCesaDebugDescriptor(&cesaSramVirtPtr->desc);
+    }
+    mvOsPrintf("\n\t Sram IV: size=%d, pVirt=%p\n",
+                    MV_CESA_MAX_IV_LENGTH, &cesaSramVirtPtr->cryptoIV);
+    if(mode != 0)
+    {
+        mvOsPrintf("\n");
+        mvDebugMemDump(cesaSramVirtPtr->cryptoIV, MV_CESA_MAX_IV_LENGTH, 1);
+    }
+    mvOsPrintf("\n");
+    mvCesaDebugSramSA(&cesaSramVirtPtr->sramSA, 0);
+}
+
+void    mvCesaDebugSAD(int mode)
+{
+    int sid;
+
+    mvOsPrintf("\n\t Cesa SAD status: pSAD=%p, maxSA=%d\n",
+                pCesaSAD, cesaMaxSA);
+
+    for(sid=0; sid<cesaMaxSA; sid++)
+    {
+        mvCesaDebugSA(sid, mode);
+    }
+}
+
+void    mvCesaDebugStats(void)
+{
+    mvOsPrintf("\n\t Cesa Statistics\n");
+
+    mvOsPrintf("Opened=%u, Closed=%u\n",
+                cesaStats.openedCount, cesaStats.closedCount);
+    mvOsPrintf("Req=%u, maxReq=%u, frags=%u, start=%u\n",
+                cesaStats.reqCount, cesaStats.maxReqCount,
+                cesaStats.fragCount, cesaStats.startCount);
+#if (MV_CESA_VERSION >= 3)
+    mvOsPrintf("maxChainUsage=%u\n",cesaStats.maxChainUsage);
+#endif
+    mvOsPrintf("\n");
+    mvOsPrintf("proc=%u, ready=%u, notReady=%u\n",
+                cesaStats.procCount, cesaStats.readyCount, cesaStats.notReadyCount);
+}
+
+void    mvCesaDebugStatsClear(void)
+{
+    memset(&cesaStats, 0, sizeof(cesaStats));
+}
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvCesaRegs.h b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvCesaRegs.h
new file mode 100644
index 0000000000..b12e44b14b
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvCesaRegs.h
@@ -0,0 +1,357 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __mvCesaRegs_h__
+#define __mvCesaRegs_h__
+
+#include "mvTypes.h"
+
+typedef struct
+{
+    /* word 0 */
+    MV_U32  config;
+    /* word 1 */    
+    MV_U16  cryptoSrcOffset;
+    MV_U16  cryptoDstOffset;
+    /* word 2 */    
+    MV_U16  cryptoDataLen;
+    MV_U16  reserved1;
+    /* word 3 */
+    MV_U16  cryptoKeyOffset;
+    MV_U16  reserved2;
+    /* word 4 */
+    MV_U16  cryptoIvOffset;
+    MV_U16  cryptoIvBufOffset;
+    /* word 5 */
+    MV_U16  macSrcOffset;
+    MV_U16  macTotalLen;
+    /* word 6 */
+    MV_U16  macDigestOffset;
+    MV_U16  macDataLen;
+    /* word 7 */
+    MV_U16  macInnerIvOffset;
+    MV_U16  macOuterIvOffset;
+
+} MV_CESA_DESC;
+
+/* operation */
+typedef enum 
+{
+    MV_CESA_MAC_ONLY         = 0,
+    MV_CESA_CRYPTO_ONLY      = 1,
+    MV_CESA_MAC_THEN_CRYPTO  = 2,
+    MV_CESA_CRYPTO_THEN_MAC  = 3,
+    
+    MV_CESA_MAX_OPERATION
+
+} MV_CESA_OPERATION;
+
+#define MV_CESA_OPERATION_OFFSET        0
+#define MV_CESA_OPERATION_MASK          (0x3 << MV_CESA_OPERATION_OFFSET)
+
+/* mac algorithm */
+typedef enum 
+{   
+    MV_CESA_MAC_NULL        = 0,
+    MV_CESA_MAC_MD5         = 4,
+    MV_CESA_MAC_SHA1        = 5,
+    MV_CESA_MAC_HMAC_MD5    = 6,
+    MV_CESA_MAC_HMAC_SHA1   = 7,
+
+} MV_CESA_MAC_MODE;
+
+#define MV_CESA_MAC_MODE_OFFSET         4
+#define MV_CESA_MAC_MODE_MASK           (0x7 << MV_CESA_MAC_MODE_OFFSET)
+
+typedef enum
+{
+    MV_CESA_MAC_DIGEST_FULL = 0,
+    MV_CESA_MAC_DIGEST_96B  = 1,
+
+} MV_CESA_MAC_DIGEST_SIZE;
+
+#define MV_CESA_MAC_DIGEST_SIZE_BIT     7
+#define MV_CESA_MAC_DIGEST_SIZE_MASK    (1 << MV_CESA_MAC_DIGEST_SIZE_BIT)
+
+
+typedef enum 
+{
+    MV_CESA_CRYPTO_NULL = 0,
+    MV_CESA_CRYPTO_DES  = 1,
+    MV_CESA_CRYPTO_3DES = 2,
+    MV_CESA_CRYPTO_AES  = 3,
+
+} MV_CESA_CRYPTO_ALG;
+
+#define MV_CESA_CRYPTO_ALG_OFFSET       8
+#define MV_CESA_CRYPTO_ALG_MASK         (0x3 << MV_CESA_CRYPTO_ALG_OFFSET)
+
+
+/* direction */
+typedef enum 
+{
+    MV_CESA_DIR_ENCODE = 0,
+    MV_CESA_DIR_DECODE = 1,
+
+} MV_CESA_DIRECTION;
+
+#define MV_CESA_DIRECTION_BIT           12
+#define MV_CESA_DIRECTION_MASK          (1 << MV_CESA_DIRECTION_BIT)
+
+/* crypto IV mode */
+typedef enum 
+{
+    MV_CESA_CRYPTO_ECB = 0,
+    MV_CESA_CRYPTO_CBC = 1,
+
+    /* NO HW Support */
+    MV_CESA_CRYPTO_CTR = 10,
+
+} MV_CESA_CRYPTO_MODE;
+
+#define MV_CESA_CRYPTO_MODE_BIT         16
+#define MV_CESA_CRYPTO_MODE_MASK        (1 << MV_CESA_CRYPTO_MODE_BIT)         
+
+/* 3DES mode */
+typedef enum 
+{
+    MV_CESA_CRYPTO_3DES_EEE = 0,
+    MV_CESA_CRYPTO_3DES_EDE = 1,
+
+} MV_CESA_CRYPTO_3DES_MODE;
+
+#define MV_CESA_CRYPTO_3DES_MODE_BIT    20
+#define MV_CESA_CRYPTO_3DES_MODE_MASK   (1 << MV_CESA_CRYPTO_3DES_MODE_BIT)
+
+
+/* AES Key Length */
+typedef enum 
+{
+    MV_CESA_CRYPTO_AES_KEY_128 = 0,
+    MV_CESA_CRYPTO_AES_KEY_192 = 1,
+    MV_CESA_CRYPTO_AES_KEY_256 = 2,
+
+} MV_CESA_CRYPTO_AES_KEY_LEN;
+
+#define MV_CESA_CRYPTO_AES_KEY_LEN_OFFSET   24
+#define MV_CESA_CRYPTO_AES_KEY_LEN_MASK     (0x3 << MV_CESA_CRYPTO_AES_KEY_LEN_OFFSET)
+
+/* Fragmentation mode */
+typedef enum 
+{
+    MV_CESA_FRAG_NONE   = 0,
+    MV_CESA_FRAG_FIRST  = 1,
+    MV_CESA_FRAG_LAST   = 2,
+    MV_CESA_FRAG_MIDDLE = 3,
+
+} MV_CESA_FRAG_MODE;
+
+#define MV_CESA_FRAG_MODE_OFFSET            30
+#define MV_CESA_FRAG_MODE_MASK              (0x3 << MV_CESA_FRAG_MODE_OFFSET)
+/*---------------------------------------------------------------------------*/
+
+/********** Security Accelerator Command Register **************/
+#define MV_CESA_CMD_REG                     (MV_CESA_REG_BASE + 0xE00)
+
+#define MV_CESA_CMD_CHAN_ENABLE_BIT         0  
+#define MV_CESA_CMD_CHAN_ENABLE_MASK        (1 << MV_CESA_CMD_CHAN_ENABLE_BIT)
+
+#define MV_CESA_CMD_CHAN_DISABLE_BIT        2  
+#define MV_CESA_CMD_CHAN_DISABLE_MASK       (1 << MV_CESA_CMD_CHAN_DISABLE_BIT)  
+
+/********** Security Accelerator Descriptor Pointers Register **********/
+#define MV_CESA_CHAN_DESC_OFFSET_REG        (MV_CESA_REG_BASE + 0xE04)
+
+/********** Security Accelerator Configuration Register **********/
+#define MV_CESA_CFG_REG                     (MV_CESA_REG_BASE + 0xE08)
+
+#define MV_CESA_CFG_STOP_DIGEST_ERR_BIT     0
+#define MV_CESA_CFG_STOP_DIGEST_ERR_MASK    (1 << MV_CESA_CFG_STOP_DIGEST_ERR_BIT)
+
+#define MV_CESA_CFG_WAIT_DMA_BIT            7
+#define MV_CESA_CFG_WAIT_DMA_MASK           (1 << MV_CESA_CFG_WAIT_DMA_BIT)
+          
+#define MV_CESA_CFG_ACT_DMA_BIT             9
+#define MV_CESA_CFG_ACT_DMA_MASK            (1 << MV_CESA_CFG_ACT_DMA_BIT)
+
+#define MV_CESA_CFG_CHAIN_MODE_BIT          11
+#define MV_CESA_CFG_CHAIN_MODE_MASK         (1 << MV_CESA_CFG_CHAIN_MODE_BIT)
+
+/********** Security Accelerator Status Register ***********/
+#define MV_CESA_STATUS_REG                  (MV_CESA_REG_BASE + 0xE0C)
+
+#define MV_CESA_STATUS_ACTIVE_BIT           0
+#define MV_CESA_STATUS_ACTIVE_MASK          (1 << MV_CESA_STATUS_ACTIVE_BIT)
+
+#define MV_CESA_STATUS_DIGEST_ERR_BIT       8
+#define MV_CESA_STATUS_DIGEST_ERR_MASK      (1 << MV_CESA_STATUS_DIGEST_ERR_BIT)
+
+
+/* Cryptographic Engines and Security Accelerator Interrupt Cause Register */
+#define MV_CESA_ISR_CAUSE_REG               (MV_CESA_REG_BASE + 0xE20)
+
+/* Cryptographic Engines and Security Accelerator Interrupt Mask Register */
+#define MV_CESA_ISR_MASK_REG                (MV_CESA_REG_BASE + 0xE24)
+
+#define MV_CESA_CAUSE_AUTH_MASK             (1 << 0)
+#define MV_CESA_CAUSE_DES_MASK              (1 << 1)
+#define MV_CESA_CAUSE_AES_ENCR_MASK         (1 << 2)
+#define MV_CESA_CAUSE_AES_DECR_MASK         (1 << 3)
+#define MV_CESA_CAUSE_DES_ALL_MASK          (1 << 4)
+
+#define MV_CESA_CAUSE_ACC_BIT               5
+#define MV_CESA_CAUSE_ACC_MASK              (1 << MV_CESA_CAUSE_ACC_BIT)
+
+#define MV_CESA_CAUSE_ACC_DMA_BIT           7
+#define MV_CESA_CAUSE_ACC_DMA_MASK          (1 << MV_CESA_CAUSE_ACC_DMA_BIT)
+#define MV_CESA_CAUSE_ACC_DMA_ALL_MASK      (3 << MV_CESA_CAUSE_ACC_DMA_BIT)
+
+#define MV_CESA_CAUSE_DMA_COMPL_BIT         9
+#define MV_CESA_CAUSE_DMA_COMPL_MASK        (1 << MV_CESA_CAUSE_DMA_COMPL_BIT)
+
+#define MV_CESA_CAUSE_DMA_OWN_ERR_BIT       10
+#define MV_CESA_CAUSE_DMA_OWN_ERR_MASK      (1 < MV_CESA_CAUSE_DMA_OWN_ERR_BIT)
+
+#define MV_CESA_CAUSE_DMA_CHAIN_PKT_BIT     11
+#define MV_CESA_CAUSE_DMA_CHAIN_PKT_MASK    (1 < MV_CESA_CAUSE_DMA_CHAIN_PKT_BIT)
+
+
+#define MV_CESA_AUTH_DATA_IN_REG            (MV_CESA_REG_BASE + 0xd38)
+#define MV_CESA_AUTH_BIT_COUNT_LOW_REG      (MV_CESA_REG_BASE + 0xd20)
+#define MV_CESA_AUTH_BIT_COUNT_HIGH_REG     (MV_CESA_REG_BASE + 0xd24)
+
+#define MV_CESA_AUTH_INIT_VAL_DIGEST_REG(i) (MV_CESA_REG_BASE + 0xd00 + (i<<2))
+
+#define MV_CESA_AUTH_INIT_VAL_DIGEST_A_REG  (MV_CESA_REG_BASE + 0xd00)
+#define MV_CESA_AUTH_INIT_VAL_DIGEST_B_REG  (MV_CESA_REG_BASE + 0xd04)
+#define MV_CESA_AUTH_INIT_VAL_DIGEST_C_REG  (MV_CESA_REG_BASE + 0xd08)
+#define MV_CESA_AUTH_INIT_VAL_DIGEST_D_REG  (MV_CESA_REG_BASE + 0xd0c)
+#define MV_CESA_AUTH_INIT_VAL_DIGEST_E_REG  (MV_CESA_REG_BASE + 0xd10)
+#define MV_CESA_AUTH_COMMAND_REG            (MV_CESA_REG_BASE + 0xd18)
+
+#define MV_CESA_AUTH_ALGORITHM_BIT          0
+#define MV_CESA_AUTH_ALGORITHM_MD5          (0<<AUTH_ALGORITHM_BIT)
+#define MV_CESA_AUTH_ALGORITHM_SHA1         (1<<AUTH_ALGORITHM_BIT)
+
+#define MV_CESA_AUTH_IV_MODE_BIT            1
+#define MV_CESA_AUTH_IV_MODE_INIT           (0<<AUTH_IV_MODE_BIT)
+#define MV_CESA_AUTH_IV_MODE_CONTINUE       (1<<AUTH_IV_MODE_BIT)
+
+#define MV_CESA_AUTH_DATA_BYTE_SWAP_BIT     2
+#define MV_CESA_AUTH_DATA_BYTE_SWAP_MASK    (1<<AUTH_DATA_BYTE_SWAP_BIT)
+
+
+#define MV_CESA_AUTH_IV_BYTE_SWAP_BIT       4
+#define MV_CESA_AUTH_IV_BYTE_SWAP_MASK      (1<<AUTH_IV_BYTE_SWAP_BIT)
+
+#define MV_CESA_AUTH_TERMINATION_BIT        31
+#define MV_CESA_AUTH_TERMINATION_MASK       (1<<AUTH_TERMINATION_BIT)
+
+
+/*************** TDMA Control Register ************************************************/
+#define MV_CESA_TDMA_CTRL_REG               (MV_CESA_TDMA_REG_BASE + 0x840)
+
+#define MV_CESA_TDMA_BURST_32B              3   
+#define MV_CESA_TDMA_BURST_128B             4   
+
+#define MV_CESA_TDMA_DST_BURST_OFFSET       0
+#define MV_CESA_TDMA_DST_BURST_ALL_MASK     (0x7<<MV_CESA_TDMA_DST_BURST_OFFSET)
+#define MV_CESA_TDMA_DST_BURST_MASK(burst)  ((burst)<<MV_CESA_TDMA_DST_BURST_OFFSET)
+
+#define MV_CESA_TDMA_OUTSTAND_READ_EN_BIT   4
+#define MV_CESA_TDMA_OUTSTAND_READ_EN_MASK  (1<<MV_CESA_TDMA_OUTSTAND_READ_EN_BIT)
+
+#define MV_CESA_TDMA_SRC_BURST_OFFSET       6
+#define MV_CESA_TDMA_SRC_BURST_ALL_MASK     (0x7<<MV_CESA_TDMA_SRC_BURST_OFFSET)
+#define MV_CESA_TDMA_SRC_BURST_MASK(burst)  ((burst)<<MV_CESA_TDMA_SRC_BURST_OFFSET)
+
+#define MV_CESA_TDMA_CHAIN_MODE_BIT         9
+#define MV_CESA_TDMA_NON_CHAIN_MODE_MASK    (1<<MV_CESA_TDMA_CHAIN_MODE_BIT)
+
+#define MV_CESA_TDMA_BYTE_SWAP_BIT	    11
+#define MV_CESA_TDMA_BYTE_SWAP_MASK	    (0 << MV_CESA_TDMA_BYTE_SWAP_BIT)
+#define MV_CESA_TDMA_NO_BYTE_SWAP_MASK	    (1 << MV_CESA_TDMA_BYTE_SWAP_BIT)		    	
+
+#define MV_CESA_TDMA_ENABLE_BIT		    12
+#define MV_CESA_TDMA_ENABLE_MASK            (1<<MV_CESA_TDMA_ENABLE_BIT)
+			    
+#define MV_CESA_TDMA_FETCH_NEXT_DESC_BIT    13	
+#define MV_CESA_TDMA_FETCH_NEXT_DESC_MASK   (1<<MV_CESA_TDMA_FETCH_NEXT_DESC_BIT)	
+
+#define MV_CESA_TDMA_CHAN_ACTIVE_BIT	    14    
+#define MV_CESA_TDMA_CHAN_ACTIVE_MASK       (1<<MV_CESA_TDMA_CHAN_ACTIVE_BIT)
+/*------------------------------------------------------------------------------------*/
+
+#define MV_CESA_TDMA_BYTE_COUNT_REG         (MV_CESA_TDMA_REG_BASE + 0x800)
+#define MV_CESA_TDMA_SRC_ADDR_REG           (MV_CESA_TDMA_REG_BASE + 0x810)
+#define MV_CESA_TDMA_DST_ADDR_REG           (MV_CESA_TDMA_REG_BASE + 0x820)
+#define MV_CESA_TDMA_NEXT_DESC_PTR_REG      (MV_CESA_TDMA_REG_BASE + 0x830)
+#define MV_CESA_TDMA_CURR_DESC_PTR_REG      (MV_CESA_TDMA_REG_BASE + 0x870)
+
+#define MV_CESA_TDMA_ERROR_CAUSE_REG        (MV_CESA_TDMA_REG_BASE + 0x8C0)
+#define MV_CESA_TDMA_ERROR_MASK_REG         (MV_CESA_TDMA_REG_BASE + 0x8C4)
+
+
+#endif /* __mvCesaRegs_h__ */ 
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvCesaTest.c b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvCesaTest.c
new file mode 100644
index 0000000000..a74828c2f4
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvCesaTest.c
@@ -0,0 +1,3096 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED.  The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+        this list of conditions and the following disclaimer.
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    *   Neither the name of Marvell nor the names of its contributors may be
+        used to endorse or promote products derived from this software without
+        specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "mvOs.h"
+
+#if defined(MV_VXWORKS)
+
+#include "sysLib.h"
+#include "logLib.h"
+#include "tickLib.h"
+#include "intLib.h"
+#include "config.h"
+
+
+SEM_ID      cesaSemId = NULL;
+SEM_ID      cesaWaitSemId = NULL;
+
+#define CESA_TEST_LOCK(flags)       flags = intLock()
+#define CESA_TEST_UNLOCK(flags)     intUnlock(flags)
+
+#define CESA_TEST_WAIT_INIT()       cesaWaitSemId = semBCreate(SEM_Q_PRIORITY, SEM_EMPTY)
+#define CESA_TEST_WAKE_UP()         semGive(cesaWaitSemId)
+#define CESA_TEST_WAIT(cond, ms)    semTake(cesaWaitSemId, (sysClkRateGet()*ms)/1000)
+
+#define CESA_TEST_TICK_GET()        tickGet()
+#define CESA_TEST_TICK_TO_MS(tick)  (((tick)*1000)/sysClkRateGet())
+
+#elif defined(MV_LINUX)
+
+#include <linux/wait.h>
+wait_queue_head_t   cesaTest_waitq;
+spinlock_t          cesaLock;
+
+#define CESA_TEST_LOCK(flags)       spin_lock_irqsave( &cesaLock, flags)
+#define CESA_TEST_UNLOCK(flags)     spin_unlock_irqrestore( &cesaLock, flags);
+
+#define CESA_TEST_WAIT_INIT()       init_waitqueue_head(&cesaTest_waitq)
+#define CESA_TEST_WAKE_UP()         wake_up(&cesaTest_waitq)
+#define CESA_TEST_WAIT(cond, ms)    wait_event_timeout(cesaTest_waitq, (cond), msecs_to_jiffies(ms))
+
+#define CESA_TEST_TICK_GET()        jiffies
+#define CESA_TEST_TICK_TO_MS(tick)  jiffies_to_msecs(tick)
+
+#elif defined(MV_NETBSD)
+
+#include <sys/param.h>
+#include <sys/kernel.h>
+static int	cesaLock;
+
+#define	CESA_TEST_LOCK(flags)		flags = splnet()
+#define	CESA_TEST_UNLOCK(flags)		splx(flags)
+
+#define	CESA_TEST_WAIT_INIT()		/* nothing */
+#define	CESA_TEST_WAKE_UP()		wakeup(&cesaLock)
+#define	CESA_TEST_WAIT(cond, ms)	\
+do {					\
+	while (!(cond))			\
+		tsleep(&cesaLock, PWAIT, "cesatest",mstohz(ms)); \
+} while (/*CONSTCOND*/0)
+
+#define	CESA_TEST_TICK_GET()		hardclock_ticks
+#define	CESA_TEST_TICK_TO_MS(tick)	((1000/hz)*(tick))
+
+#define	request_irq(i,h,t,n,a)	\
+	!mv_intr_establish((i),IPL_NET,(int(*)(void *))(h),(a))
+
+#else
+#error "Only Linux, VxWorks, or NetBSD OS are supported"
+#endif
+
+#include "mvDebug.h"
+
+#include "mvSysHwConfig.h"
+#include "boardEnv/mvBoardEnvLib.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+#include "cntmr/mvCntmr.h"
+#include "cesa/mvCesa.h"
+#include "cesa/mvCesaRegs.h"
+#include "cesa/mvMD5.h"
+#include "cesa/mvSHA1.h"
+
+#if defined(CONFIG_MV646xx)
+#include "marvell_pic.h"
+#endif
+
+#define MV_CESA_USE_TIMER_ID    0
+#define CESA_DEF_BUF_SIZE       1500
+#define CESA_DEF_BUF_NUM        1
+#define CESA_DEF_SESSION_NUM    32
+
+#define CESA_DEF_ITER_NUM       100
+
+#define CESA_DEF_REQ_SIZE       256
+
+
+/* CESA Tests Debug */
+#undef CESA_TEST_DEBUG
+
+#ifdef CESA_TEST_DEBUG
+
+#   define CESA_TEST_DEBUG_PRINT(msg)   mvOsPrintf msg
+#   define CESA_TEST_DEBUG_CODE(code)   code
+
+typedef struct
+{
+    int             type;       /* 0 - isrEmpty, 1 - cesaReadyGet, 2 - cesaAction */
+    MV_U32          timeStamp;
+    MV_U32          cause;
+    MV_U32          realCause;
+    MV_U32          dmaCause;
+    int             resources;
+    MV_CESA_REQ*    pReqReady;
+    MV_CESA_REQ*    pReqEmpty;
+    MV_CESA_REQ*    pReqProcess;
+} MV_CESA_TEST_TRACE;
+
+#define MV_CESA_TEST_TRACE_SIZE      25
+
+static int cesaTestTraceIdx = 0;
+static MV_CESA_TEST_TRACE    cesaTestTrace[MV_CESA_TEST_TRACE_SIZE];
+
+static void cesaTestTraceAdd(int type, MV_U32 cause)
+{
+    cesaTestTrace[cesaTestTraceIdx].type = type;
+    cesaTestTrace[cesaTestTraceIdx].cause = cause;
+    cesaTestTrace[cesaTestTraceIdx].realCause = MV_REG_READ(MV_CESA_ISR_CAUSE_REG);
+    cesaTestTrace[cesaTestTraceIdx].dmaCause = MV_REG_READ(IDMA_CAUSE_REG);
+    cesaTestTrace[cesaTestTraceIdx].resources = cesaReqResources;
+    cesaTestTrace[cesaTestTraceIdx].pReqReady = pCesaReqReady;
+    cesaTestTrace[cesaTestTraceIdx].pReqEmpty = pCesaReqEmpty;
+    cesaTestTrace[cesaTestTraceIdx].pReqProcess = pCesaReqProcess;
+    cesaTestTrace[cesaTestTraceIdx].timeStamp = mvCntmrRead(MV_CESA_USE_TIMER_ID);
+    cesaTestTraceIdx++;
+    if(cesaTestTraceIdx == MV_CESA_TEST_TRACE_SIZE)
+        cesaTestTraceIdx = 0;
+}
+
+#else
+
+#   define CESA_TEST_DEBUG_PRINT(msg)
+#   define CESA_TEST_DEBUG_CODE(code)
+
+#endif /* CESA_TEST_DEBUG */
+
+int                 cesaExpReqId=0;
+int                 cesaCbIter=0;
+
+int                 cesaIdx;
+int                 cesaIteration;
+int                 cesaRateSize;
+int                 cesaReqSize;
+unsigned long       cesaTaskId;
+int                 cesaBufNum;
+int                 cesaBufSize;
+int                 cesaCheckOffset;
+int                 cesaCheckSize;
+int                 cesaCheckMode;
+int                 cesaTestIdx;
+int                 cesaCaseIdx;
+
+
+MV_U32      cesaTestIsrCount = 0;
+MV_U32      cesaTestIsrMissCount = 0;
+
+MV_U32      cesaCryptoError = 0;
+MV_U32      cesaReqIdError  = 0;
+MV_U32      cesaError = 0;
+
+char*       cesaHexBuffer = NULL;
+
+char*       cesaBinBuffer = NULL;
+char*       cesaExpBinBuffer = NULL;
+
+char*       cesaInputHexStr  = NULL;
+char*       cesaOutputHexStr = NULL;
+
+MV_BUF_INFO         cesaReqBufs[CESA_DEF_REQ_SIZE];
+
+MV_CESA_COMMAND*    cesaCmdRing;
+MV_CESA_RESULT      cesaResult;
+
+int                 cesaTestFull = 0;
+
+MV_BOOL             cesaIsReady = MV_FALSE;
+MV_U32              cesaCycles = 0;
+MV_U32              cesaBeginTicks = 0;
+MV_U32              cesaEndTicks = 0;
+MV_U32              cesaRate = 0;
+MV_U32              cesaRateAfterDot = 0;
+
+void 		    *cesaTestOSHandle = NULL;
+
+enum
+{
+    CESA_FAST_CHECK_MODE = 0,
+    CESA_FULL_CHECK_MODE,
+    CESA_NULL_CHECK_MODE,
+    CESA_SHOW_CHECK_MODE,
+    CESA_SW_SHOW_CHECK_MODE,
+    CESA_SW_NULL_CHECK_MODE,
+
+    CESA_MAX_CHECK_MODE
+};
+
+enum
+{
+    DES_TEST_TYPE         = 0,
+    TRIPLE_DES_TEST_TYPE  = 1,
+    AES_TEST_TYPE         = 2,
+    MD5_TEST_TYPE         = 3,
+    SHA_TEST_TYPE         = 4,
+    COMBINED_TEST_TYPE    = 5,
+
+    MAX_TEST_TYPE
+};
+
+/* Tests data base */
+typedef struct
+{
+    short           sid;
+    char            cryptoAlgorithm;    /* DES/3DES/AES */
+    char            cryptoMode;         /* ECB or CBC */
+    char            macAlgorithm;       /* MD5 / SHA1 */
+    char            operation;          /* CRYPTO/HMAC/CRYPTO+HMAC/HMAC+CRYPTO */
+    char            direction;          /* ENCODE(SIGN)/DECODE(VERIFY) */
+    unsigned char*  pCryptoKey;
+    int             cryptoKeySize;
+    unsigned char*  pMacKey;
+    int             macKeySize;
+    const char*     name;
+
+} MV_CESA_TEST_SESSION;
+
+typedef struct
+{
+    MV_CESA_TEST_SESSION*   pSessions;
+    int                     numSessions;
+
+} MV_CESA_TEST_DB_ENTRY;
+
+typedef struct
+{
+    char*           plainHexStr;
+    char*           cipherHexStr;
+    unsigned char*  pCryptoIV;
+    int             cryptoLength;
+    int             macLength;
+    int             digestOffset;
+
+} MV_CESA_TEST_CASE;
+
+typedef struct
+{
+    int     size;
+    const char* outputHexStr;
+
+} MV_CESA_SIZE_TEST;
+
+static unsigned char    cryptoKey1[] = {0x01, 0x23, 0x45, 0x67, 0x89, 0xab, 0xcd, 0xef,
+                                        0x01, 0x23, 0x45, 0x67, 0x89, 0xab, 0xcd, 0xef,
+                                        0x01, 0x23, 0x45, 0x67, 0x89, 0xab, 0xcd, 0xef};
+
+static unsigned char    cryptoKey7[] = {0x01, 0x23, 0x45, 0x67, 0x89, 0xab, 0xcd, 0xef};
+static unsigned char    iv1[]        = {0x12, 0x34, 0x56, 0x78, 0x90, 0xab, 0xcd, 0xef};
+
+
+static unsigned char    cryptoKey2[] = {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+                                        0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F};
+
+static unsigned char    cryptoKey3[] = {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+                                        0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
+                                        0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17};
+
+static unsigned char    cryptoKey4[] = {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+                                        0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
+                                        0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
+                                        0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f};
+
+static unsigned char    cryptoKey5[] = {0x56, 0xe4, 0x7a, 0x38, 0xc5, 0x59, 0x89, 0x74,
+                                        0xbc, 0x46, 0x90, 0x3d, 0xba, 0x29, 0x03, 0x49};
+
+
+static unsigned char    key3des1[]   = {0x01, 0x23, 0x45, 0x67, 0x89, 0xAB, 0xCD, 0xEF,
+                                        0x23, 0x45, 0x67, 0x89, 0xAB, 0xCD, 0xEF, 0x01,
+                                        0x45, 0x67, 0x89, 0xAB, 0xCD, 0xEF, 0x01, 0x23};
+
+/*  Input ASCII string: The quick brown fox jump  */
+static char  plain3des1[]           =   "54686520717566636B2062726F776E20666F78206A756D70";
+static char  cipher3des1[]          =   "A826FD8CE53B855FCCE21C8112256FE668D5C05DD9B6B900";
+
+static unsigned char    key3des2[]  = {0x62, 0x7f, 0x46, 0x0e, 0x08, 0x10, 0x4a, 0x10,
+                                       0x43, 0xcd, 0x26, 0x5d, 0x58, 0x40, 0xea, 0xf1,
+                                       0x31, 0x3e, 0xdf, 0x97, 0xdf, 0x2a, 0x8a, 0x8c};
+
+static unsigned char    iv3des2[]   = {0x8e, 0x29, 0xf7, 0x5e, 0xa7, 0x7e, 0x54, 0x75};
+
+static char  plain3des2[]           = "326a494cd33fe756";
+
+static char  cipher3desCbc2[]       = "8e29f75ea77e5475"
+                                      "b22b8d66de970692";
+
+static unsigned char    key3des3[]  = {0x37, 0xae, 0x5e, 0xbf, 0x46, 0xdf, 0xf2, 0xdc,
+                                       0x07, 0x54, 0xb9, 0x4f, 0x31, 0xcb, 0xb3, 0x85,
+                                       0x5e, 0x7f, 0xd3, 0x6d, 0xc8, 0x70, 0xbf, 0xae};
+
+static unsigned char    iv3des3[]   = {0x3d, 0x1d, 0xe3, 0xcc, 0x13, 0x2e, 0x3b, 0x65};
+
+static char  plain3des3[]           = "84401f78fe6c10876d8ea23094ea5309";
+
+static char  cipher3desCbc3[]       = "3d1de3cc132e3b65"
+                                      "7b1f7c7e3b1c948ebd04a75ffba7d2f5";
+
+static unsigned char    iv5[]        = {0x8c, 0xe8, 0x2e, 0xef, 0xbe, 0xa0, 0xda, 0x3c,
+                                        0x44, 0x69, 0x9e, 0xd7, 0xdb, 0x51, 0xb7, 0xd9};
+
+static unsigned char    aesCtrKey[]  = {0x76, 0x91, 0xBE, 0x03, 0x5E, 0x50, 0x20, 0xA8,
+                                        0xAC, 0x6E, 0x61, 0x85, 0x29, 0xF9, 0xA0, 0xDC};
+
+static unsigned char    mdKey1[]     = {0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b,
+                                        0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b};
+
+static unsigned char    mdKey2[]     = {0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
+                                        0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa};
+
+static unsigned char    shaKey1[]    = {0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b,
+                                        0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b,
+                                        0x0b, 0x0b, 0x0b, 0x0b};
+
+static unsigned char    shaKey2[]    = {0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
+                                        0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
+                                        0xaa, 0xaa, 0xaa, 0xaa};
+
+static unsigned char    mdKey4[]     = {0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
+                                        0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10};
+
+static unsigned char    shaKey4[]    = {0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
+                                        0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10,
+                                        0x11, 0x12, 0x13, 0x14};
+
+
+static MV_CESA_TEST_SESSION   desTestSessions[] =
+{
+/*000*/ {-1, MV_CESA_CRYPTO_DES, MV_CESA_CRYPTO_ECB,
+             MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+             MV_CESA_DIR_ENCODE,
+             cryptoKey7, sizeof(cryptoKey7)/sizeof(cryptoKey7[0]),
+             NULL, 0,
+             "DES ECB encode",
+        },
+/*001*/ {-1, MV_CESA_CRYPTO_DES, MV_CESA_CRYPTO_ECB,
+             MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+             MV_CESA_DIR_DECODE,
+             cryptoKey7, sizeof(cryptoKey7)/sizeof(cryptoKey7[0]),
+             NULL, 0,
+             "DES ECB decode",
+        },
+/*002*/ {-1, MV_CESA_CRYPTO_DES, MV_CESA_CRYPTO_CBC,
+             MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+             MV_CESA_DIR_ENCODE,
+             cryptoKey7, sizeof(cryptoKey7)/sizeof(cryptoKey7[0]),
+             NULL, 0,
+             "DES CBC encode"
+        },
+/*003*/ {-1, MV_CESA_CRYPTO_DES, MV_CESA_CRYPTO_CBC,
+             MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+             MV_CESA_DIR_DECODE,
+             cryptoKey7, sizeof(cryptoKey7)/sizeof(cryptoKey7[0]),
+             NULL, 0,
+             "DES CBC decode"
+        },
+/*004*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB,
+             MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+             MV_CESA_DIR_ENCODE,
+             NULL, 0, NULL, 0,
+              "NULL Crypto Algorithm encode"
+        },
+};
+
+
+static MV_CESA_TEST_SESSION   tripleDesTestSessions[] =
+{
+/*100*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_ECB,
+             MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+             MV_CESA_DIR_ENCODE,
+             cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]),
+             NULL, 0,
+             "3DES ECB encode",
+        },
+/*101*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_ECB,
+             MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+             MV_CESA_DIR_DECODE,
+             cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]),
+             NULL, 0,
+             "3DES ECB decode",
+        },
+/*102*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_CBC,
+             MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+             MV_CESA_DIR_ENCODE,
+             cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]),
+             NULL, 0,
+             "3DES CBC encode"
+        },
+/*103*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_CBC,
+             MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+             MV_CESA_DIR_DECODE,
+             cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]),
+             NULL, 0,
+             "3DES CBC decode"
+        },
+/*104*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_ECB,
+             MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+             MV_CESA_DIR_ENCODE,
+             key3des1, sizeof(key3des1),
+             NULL, 0,
+             "3DES ECB encode"
+        },
+/*105*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_CBC,
+             MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+             MV_CESA_DIR_ENCODE,
+             key3des2, sizeof(key3des2),
+             NULL, 0,
+             "3DES ECB encode"
+        },
+/*106*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_CBC,
+             MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+             MV_CESA_DIR_ENCODE,
+             key3des3, sizeof(key3des3),
+             NULL, 0,
+             "3DES ECB encode"
+        },
+};
+
+
+static MV_CESA_TEST_SESSION   aesTestSessions[] =
+{
+/*200*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_ECB,
+             MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+             MV_CESA_DIR_ENCODE,
+             cryptoKey2, sizeof(cryptoKey2)/sizeof(cryptoKey2[0]),
+             NULL, 0,
+             "AES-128 ECB encode"
+        },
+/*201*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_ECB,
+             MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+             MV_CESA_DIR_DECODE,
+             cryptoKey2, sizeof(cryptoKey2)/sizeof(cryptoKey2[0]),
+             NULL, 0,
+             "AES-128 ECB decode"
+        },
+/*202*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_CBC,
+             MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+             MV_CESA_DIR_ENCODE,
+             cryptoKey5, sizeof(cryptoKey5)/sizeof(cryptoKey5[0]),
+             NULL, 0,
+             "AES-128 CBC encode"
+        },
+/*203*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_CBC,
+             MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+             MV_CESA_DIR_DECODE,
+             cryptoKey5, sizeof(cryptoKey5)/sizeof(cryptoKey5[0]),
+             NULL, 0,
+             "AES-128 CBC decode"
+        },
+/*204*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_ECB,
+             MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+             MV_CESA_DIR_ENCODE,
+             cryptoKey3, sizeof(cryptoKey3)/sizeof(cryptoKey3[0]),
+             NULL, 0,
+             "AES-192 ECB encode"
+        },
+/*205*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_ECB,
+             MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+             MV_CESA_DIR_DECODE,
+             cryptoKey3, sizeof(cryptoKey3)/sizeof(cryptoKey3[0]),
+             NULL, 0,
+             "AES-192 ECB decode"
+        },
+/*206*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_ECB,
+             MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+             MV_CESA_DIR_ENCODE,
+             cryptoKey4, sizeof(cryptoKey4)/sizeof(cryptoKey4[0]),
+             NULL, 0,
+             "AES-256 ECB encode"
+        },
+/*207*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_ECB,
+             MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+             MV_CESA_DIR_DECODE,
+             cryptoKey4, sizeof(cryptoKey4)/sizeof(cryptoKey4[0]),
+             NULL, 0,
+             "AES-256 ECB decode"
+        },
+/*208*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_CTR,
+             MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY,
+             MV_CESA_DIR_ENCODE,
+             aesCtrKey, sizeof(aesCtrKey)/sizeof(aesCtrKey[0]),
+             NULL, 0,
+             "AES-128 CTR encode"
+        },
+};
+
+
+static MV_CESA_TEST_SESSION   md5TestSessions[] =
+{
+/*300*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB,
+             MV_CESA_MAC_HMAC_MD5, MV_CESA_MAC_ONLY,
+             MV_CESA_DIR_ENCODE,
+             NULL, 0,
+             mdKey1, sizeof(mdKey1),
+             "HMAC-MD5 Generate Signature"
+        },
+/*301*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB,
+             MV_CESA_MAC_HMAC_MD5, MV_CESA_MAC_ONLY,
+             MV_CESA_DIR_DECODE,
+             NULL, 0,
+             mdKey1, sizeof(mdKey1),
+             "HMAC-MD5 Verify Signature"
+        },
+/*302*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB,
+             MV_CESA_MAC_HMAC_MD5, MV_CESA_MAC_ONLY,
+             MV_CESA_DIR_ENCODE,
+             NULL, 0,
+             mdKey2, sizeof(mdKey2),
+             "HMAC-MD5 Generate Signature"
+        },
+/*303*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB,
+             MV_CESA_MAC_HMAC_MD5, MV_CESA_MAC_ONLY,
+             MV_CESA_DIR_DECODE,
+             NULL, 0,
+             mdKey2, sizeof(mdKey2),
+             "HMAC-MD5 Verify Signature"
+        },
+/*304*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB,
+             MV_CESA_MAC_HMAC_MD5, MV_CESA_MAC_ONLY,
+             MV_CESA_DIR_ENCODE,
+             NULL, 0,
+             mdKey4, sizeof(mdKey4),
+             "HMAC-MD5 Generate Signature"
+        },
+/*305*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB,
+             MV_CESA_MAC_MD5, MV_CESA_MAC_ONLY,
+             MV_CESA_DIR_ENCODE,
+             NULL, 0,
+             NULL, 0,
+             "HASH-MD5 Generate Signature"
+        },
+};
+
+
+static MV_CESA_TEST_SESSION   shaTestSessions[] =
+{
+/*400*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB,
+             MV_CESA_MAC_HMAC_SHA1, MV_CESA_MAC_ONLY,
+             MV_CESA_DIR_ENCODE,
+             NULL, 0,
+             shaKey1, sizeof(shaKey1),
+             "HMAC-SHA1 Generate Signature"
+        },
+/*401*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB,
+             MV_CESA_MAC_HMAC_SHA1, MV_CESA_MAC_ONLY,
+             MV_CESA_DIR_DECODE,
+             NULL, 0,
+             shaKey1, sizeof(shaKey1),
+             "HMAC-SHA1 Verify Signature"
+        },
+/*402*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB,
+             MV_CESA_MAC_HMAC_SHA1, MV_CESA_MAC_ONLY,
+             MV_CESA_DIR_ENCODE,
+             NULL, 0,
+             shaKey2, sizeof(shaKey2),
+             "HMAC-SHA1 Generate Signature"
+        },
+/*403*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB,
+             MV_CESA_MAC_HMAC_SHA1, MV_CESA_MAC_ONLY,
+             MV_CESA_DIR_DECODE,
+             NULL, 0,
+             shaKey2, sizeof(shaKey2),
+             "HMAC-SHA1 Verify Signature"
+        },
+/*404*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB,
+             MV_CESA_MAC_HMAC_SHA1, MV_CESA_MAC_ONLY,
+             MV_CESA_DIR_ENCODE,
+             NULL, 0,
+             shaKey4, sizeof(shaKey4),
+             "HMAC-SHA1 Generate Signature"
+        },
+/*405*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB,
+             MV_CESA_MAC_SHA1, MV_CESA_MAC_ONLY,
+             MV_CESA_DIR_ENCODE,
+             NULL, 0,
+             NULL, 0,
+             "HASH-SHA1 Generate Signature"
+        },
+};
+
+static MV_CESA_TEST_SESSION   combinedTestSessions[] =
+{
+/*500*/ {-1, MV_CESA_CRYPTO_DES, MV_CESA_CRYPTO_ECB,
+             MV_CESA_MAC_HMAC_MD5, MV_CESA_CRYPTO_THEN_MAC,
+             MV_CESA_DIR_ENCODE,
+             cryptoKey1, MV_CESA_DES_KEY_LENGTH,
+             mdKey4, sizeof(mdKey4),
+             "DES + MD5 encode"
+        },
+/*501*/ {-1, MV_CESA_CRYPTO_DES, MV_CESA_CRYPTO_ECB,
+             MV_CESA_MAC_HMAC_SHA1, MV_CESA_CRYPTO_THEN_MAC,
+             MV_CESA_DIR_ENCODE,
+             cryptoKey1, MV_CESA_DES_KEY_LENGTH,
+             shaKey4, sizeof(shaKey4),
+             "DES + SHA1 encode"
+        },
+/*502*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_ECB,
+             MV_CESA_MAC_HMAC_MD5, MV_CESA_CRYPTO_THEN_MAC,
+             MV_CESA_DIR_ENCODE,
+             cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]),
+             mdKey4, sizeof(mdKey4),
+             "3DES + MD5 encode"
+        },
+/*503*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_ECB,
+             MV_CESA_MAC_HMAC_SHA1, MV_CESA_CRYPTO_THEN_MAC,
+             MV_CESA_DIR_ENCODE,
+             cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]),
+             shaKey4, sizeof(shaKey4),
+             "3DES + SHA1 encode"
+        },
+/*504*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_CBC,
+             MV_CESA_MAC_HMAC_MD5, MV_CESA_CRYPTO_THEN_MAC,
+             MV_CESA_DIR_ENCODE,
+             cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]),
+             mdKey4, sizeof(mdKey4),
+             "3DES CBC + MD5 encode"
+        },
+/*505*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_CBC,
+             MV_CESA_MAC_HMAC_SHA1, MV_CESA_CRYPTO_THEN_MAC,
+             MV_CESA_DIR_ENCODE,
+             cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]),
+             shaKey4, sizeof(shaKey4),
+             "3DES CBC + SHA1 encode"
+        },
+/*506*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_CBC,
+             MV_CESA_MAC_HMAC_MD5, MV_CESA_CRYPTO_THEN_MAC,
+             MV_CESA_DIR_ENCODE,
+             cryptoKey5, sizeof(cryptoKey5)/sizeof(cryptoKey5[0]),
+             mdKey4, sizeof(mdKey4),
+             "AES-128 CBC + MD5 encode"
+        },
+/*507*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_CBC,
+             MV_CESA_MAC_HMAC_SHA1, MV_CESA_CRYPTO_THEN_MAC,
+             MV_CESA_DIR_ENCODE,
+             cryptoKey5, sizeof(cryptoKey5)/sizeof(cryptoKey5[0]),
+             shaKey4, sizeof(shaKey4),
+             "AES-128 CBC + SHA1 encode"
+        },
+/*508*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_ECB,
+             MV_CESA_MAC_HMAC_MD5, MV_CESA_MAC_THEN_CRYPTO,
+             MV_CESA_DIR_DECODE,
+             cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]),
+             mdKey4, sizeof(mdKey4),
+             "HMAC-MD5 + 3DES decode"
+        },
+};
+
+
+static MV_CESA_TEST_DB_ENTRY cesaTestsDB[MAX_TEST_TYPE+1] =
+{
+    { desTestSessions,       sizeof(desTestSessions)/sizeof(desTestSessions[0]) },
+    { tripleDesTestSessions, sizeof(tripleDesTestSessions)/sizeof(tripleDesTestSessions[0]) },
+    { aesTestSessions,       sizeof(aesTestSessions)/sizeof(aesTestSessions[0]) },
+    { md5TestSessions,       sizeof(md5TestSessions)/sizeof(md5TestSessions[0]) },
+    { shaTestSessions,       sizeof(shaTestSessions)/sizeof(shaTestSessions[0]) },
+    { combinedTestSessions,  sizeof(combinedTestSessions)/sizeof(combinedTestSessions[0]) },
+    { NULL,                  0 }
+};
+
+
+char  cesaNullPlainHexText[]   = "000000000000000000000000000000000000000000000000";
+
+char  cesaPlainAsciiText[]     = "Now is the time for all ";
+char  cesaPlainHexEbc[]        = "4e6f77206973207468652074696d6520666f7220616c6c20";
+char  cesaCipherHexEcb[]       = "3fa40e8a984d48156a271787ab8883f9893d51ec4b563b53";
+char  cesaPlainHexCbc[]        = "1234567890abcdef4e6f77206973207468652074696d6520666f7220616c6c20";
+char  cesaCipherHexCbc[]       = "1234567890abcdefe5c7cdde872bf27c43e934008c389c0f683788499a7c05f6";
+
+char  cesaAesPlainHexEcb[]     = "000102030405060708090a0b0c0d0e0f";
+char  cesaAes128cipherHexEcb[] = "0a940bb5416ef045f1c39458c653ea5a";
+char  cesaAes192cipherHexEcb[] = "0060bffe46834bb8da5cf9a61ff220ae";
+char  cesaAes256cipherHexEcb[] = "5a6e045708fb7196f02e553d02c3a692";
+
+char  cesaAsciiStr1[]          = "Hi There";
+char  cesaDataHexStr1[]        = "4869205468657265";
+char  cesaHmacMd5digestHex1[]  = "9294727a3638bb1c13f48ef8158bfc9d";
+char  cesaHmacSha1digestHex1[] = "b617318655057264e28bc0b6fb378c8ef146be00";
+char  cesaDataAndMd5digest1[]  = "48692054686572659294727a3638bb1c13f48ef8158bfc9d";
+char  cesaDataAndSha1digest1[] = "4869205468657265b617318655057264e28bc0b6fb378c8ef146be00";
+
+char  cesaAesPlainText[]       = "a0a1a2a3a4a5a6a7a8a9aaabacadaeaf"
+                                 "b0b1b2b3b4b5b6b7b8b9babbbcbdbebf"
+                                 "c0c1c2c3c4c5c6c7c8c9cacbcccdcecf"
+                                 "d0d1d2d3d4d5d6d7d8d9dadbdcdddedf";
+
+char  cesaAes128CipherCbc[]    = "c30e32ffedc0774e6aff6af0869f71aa"
+                                 "0f3af07a9a31a9c684db207eb0ef8e4e"
+                                 "35907aa632c3ffdf868bb7b29d3d46ad"
+                                 "83ce9f9a102ee99d49a53e87f4c3da55";
+
+char  cesaAesIvPlainText[]     = "8ce82eefbea0da3c44699ed7db51b7d9"
+                                 "a0a1a2a3a4a5a6a7a8a9aaabacadaeaf"
+                                 "b0b1b2b3b4b5b6b7b8b9babbbcbdbebf"
+                                 "c0c1c2c3c4c5c6c7c8c9cacbcccdcecf"
+                                 "d0d1d2d3d4d5d6d7d8d9dadbdcdddedf";
+
+char  cesaAes128IvCipherCbc[]  = "8ce82eefbea0da3c44699ed7db51b7d9"
+                                 "c30e32ffedc0774e6aff6af0869f71aa"
+                                 "0f3af07a9a31a9c684db207eb0ef8e4e"
+                                 "35907aa632c3ffdf868bb7b29d3d46ad"
+                                 "83ce9f9a102ee99d49a53e87f4c3da55";
+
+char  cesaAesCtrPlain[]        = "00E0017B27777F3F4A1786F000000001"
+                                 "000102030405060708090A0B0C0D0E0F"
+                                 "101112131415161718191A1B1C1D1E1F"
+                                 "20212223";
+
+char  cesaAesCtrCipher[]       = "00E0017B27777F3F4A1786F000000001"
+                                 "C1CF48A89F2FFDD9CF4652E9EFDB72D7"
+                                 "4540A42BDE6D7836D59A5CEAAEF31053"
+                                 "25B2072F";
+
+
+
+/* Input cesaHmacHex3 is '0xdd' repeated 50 times */
+char  cesaHmacMd5digestHex3[]  = "56be34521d144c88dbb8c733f0e8b3f6";
+char  cesaHmacSha1digestHex3[] = "125d7342b9ac11cd91a39af48aa17b4f63f175d3";
+char  cesaDataHexStr3[50*2+1]          = "";
+char  cesaDataAndMd5digest3[sizeof(cesaDataHexStr3)+sizeof(cesaHmacMd5digestHex3)+8*2+1] = "";
+char  cesaDataAndSha1digest3[sizeof(cesaDataHexStr3)+sizeof(cesaHmacSha1digestHex3)+8*2+1] = "";
+
+/* Ascii string is "abc" */
+char hashHexStr3[] = "616263";
+char hashMd5digest3[] = "900150983cd24fb0d6963f7d28e17f72";
+char hashSha1digest3[] = "a9993e364706816aba3e25717850c26c9cd0d89d";
+
+char hashHexStr80[]     = "31323334353637383930"
+                          "31323334353637383930"
+                          "31323334353637383930"
+                          "31323334353637383930"
+                          "31323334353637383930"
+                          "31323334353637383930"
+                          "31323334353637383930"
+                          "31323334353637383930";
+
+char hashMd5digest80[]           = "57edf4a22be3c955ac49da2e2107b67a";
+
+char tripleDesThenMd5digest80[]  = "b7726a03aad490bd6c5a452a89a1b271";
+char tripleDesThenSha1digest80[] = "b2ddeaca91030eab5b95a234ef2c0f6e738ff883";
+
+char cbc3desThenMd5digest80[]    = "6f463057e1a90e0e91ae505b527bcec0";
+char cbc3desThenSha1digest80[]   = "1b002ed050be743aa98860cf35659646bb8efcc0";
+
+char cbcAes128ThenMd5digest80[]  = "6b6e863ac5a71d15e3e9b1c86c9ba05f";
+char cbcAes128ThenSha1digest80[] = "13558472d1fc1c90dffec6e5136c7203452d509b";
+
+
+static MV_CESA_TEST_CASE  cesaTestCases[] =
+{
+ /*     plainHexStr          cipherHexStr               IV    crypto  mac     digest */
+ /*                                                           Length  Length  Offset */
+ /*0*/ { NULL,               NULL,                      NULL,   0,      0,      -1  },
+ /*1*/ { cesaPlainHexEbc,    cesaCipherHexEcb,          NULL,   24,     0,      -1  },
+ /*2*/ { cesaPlainHexCbc,    cesaCipherHexCbc,          NULL,   24,     0,      -1  },
+ /*3*/ { cesaAesPlainHexEcb, cesaAes128cipherHexEcb,    NULL,   16,     0,      -1  },
+ /*4*/ { cesaAesPlainHexEcb, cesaAes192cipherHexEcb,    NULL,   16,     0,      -1  },
+ /*5*/ { cesaAesPlainHexEcb, cesaAes256cipherHexEcb,    NULL,   16,     0,      -1  },
+ /*6*/ { cesaDataHexStr1,    cesaHmacMd5digestHex1,     NULL,   0,      8,      -1  },
+ /*7*/ { NULL,               cesaDataAndMd5digest1,     NULL,   0,      8,      -1  },
+ /*8*/ { cesaDataHexStr3,    cesaHmacMd5digestHex3,     NULL,   0,      50,     -1  },
+ /*9*/ { NULL,               cesaDataAndMd5digest3,     NULL,   0,      50,     -1  },
+/*10*/ { cesaAesPlainText,   cesaAes128IvCipherCbc,     iv5,    64,     0,      -1  },
+/*11*/ { cesaDataHexStr1,    cesaHmacSha1digestHex1,    NULL,   0,      8,      -1  },
+/*12*/ { NULL,               cesaDataAndSha1digest1,    NULL,   0,      8,      -1  },
+/*13*/ { cesaDataHexStr3,    cesaHmacSha1digestHex3,    NULL,   0,      50,     -1  },
+/*14*/ { NULL,               cesaDataAndSha1digest3,    NULL,   0,      50,     -1  },
+/*15*/ { hashHexStr3,        hashMd5digest3,            NULL,   0,      3,      -1  },
+/*16*/ { hashHexStr3,        hashSha1digest3,           NULL,   0,      3,      -1  },
+/*17*/ { hashHexStr80,       tripleDesThenMd5digest80,  NULL,   80,     80,     -1  },
+/*18*/ { hashHexStr80,       tripleDesThenSha1digest80, NULL,   80,     80,     -1  },
+/*19*/ { hashHexStr80,       cbc3desThenMd5digest80,    iv1,    80,     80,     -1  },
+/*20*/ { hashHexStr80,       cbc3desThenSha1digest80,   iv1,    80,     80,     -1  },
+/*21*/ { hashHexStr80,       cbcAes128ThenMd5digest80,  iv5,    80,     80,     -1  },
+/*22*/ { hashHexStr80,       cbcAes128ThenSha1digest80, iv5,    80,     80,     -1  },
+/*23*/ { cesaAesCtrPlain,    cesaAesCtrCipher,          NULL,   36,     0,      -1  },
+/*24*/ { cesaAesIvPlainText, cesaAes128IvCipherCbc,     NULL,   64,     0,      -1  },
+/*25*/ { plain3des1,         cipher3des1,               NULL,   0,      0,      -1  },
+/*26*/ { plain3des2,         cipher3desCbc2,            iv3des2,0,      0,      -1  },
+/*27*/ { plain3des3,         cipher3desCbc3,            iv3des3,0,      0,      -1  },
+};
+
+
+/* Key         = 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
+ *               0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa
+ * Input 0xdd repeated "size" times
+ */
+static MV_CESA_SIZE_TEST     mdMultiSizeTest302[] =
+{
+    { 80,   "7a031a640c14a4872814930b1ef3a5b2" },
+    { 512,  "5488e6c5a14dc72a79f28312ca5b939b" },
+    { 1000, "d00814f586a8b78a05724239d2531821" },
+    { 1001, "bf07df7b7f49d3f5b5ecacd4e9e63281" },
+    { 1002, "1ed4a1a802e87817a819d4e37bb4d0f7" },
+    { 1003, "5972ab64a4f265ee371dac2f2f137f90" },
+    { 1004, "71f95e7ec3aa7df2548e90898abdb28e" },
+    { 1005, "e082790b4857fcfc266e92e59e608814" },
+    { 1006, "9500f02fd8ac7fde8b10e4fece9a920d" },
+    { 1336, "e42edcce57d0b75b01aa09d71427948b" },
+    { 1344, "bb5454ada0deb49ba0a97ffd60f57071" },
+    { 1399, "0f44d793e744b24d53f44f295082ee8c" },
+    { 1400, "359de8a03a9b707928c6c60e0e8d79f1" },
+    { 1401, "e913858b484cbe2b384099ea88d8855b" },
+    { 1402, "d9848a164af53620e0540c1d7d87629e" },
+    { 1403, "0c9ee1c2c9ef45e9b625c26cbaf3e822" },
+    { 1404, "12edd4f609416e3c936170360561b064" },
+    { 1405, "7fc912718a05446395345009132bf562" },
+    { 1406, "882f17425e579ff0d85a91a59f308aa0" },
+    { 1407, "005cae408630a2fb5db82ad9db7e59da" },
+    { 1408, "64655f8b404b3fea7a3e3e609bc5088f" },
+    { 1409, "4a145284a7f74e01b6bb1a0ec6a0dd80" },
+    { 2048, "67caf64475650732def374ebb8bde3fd" },
+    { 2049, "6c84f11f472825f7e6cd125c2981884b" },
+    { 2050, "8999586754a73a99efbe4dbad2816d41" },
+    { 2051, "ba6946b610e098d286bc81091659dfff" },
+    { 2052, "d0afa01c92d4d13def2b024f36faed83" },
+    { 3072, "61d8beac61806afa2585d74a9a0e6974" },
+    { 3074, "f6501a28dcc24d1e4770505c51a87ed3" },
+    { 3075, "ea4a6929be67e33e61ff475369248b73" },
+    { 4048, "aa8c4d68f282a07e7385acdfa69f4bed" },
+    { 4052, "afb5ed2c0e1d430ea59e59ed5ed6b18a" },
+    { 4058, "9e8553f9bdd43aebe0bd729f0e600c99" },
+    { 6144, "f628f3e5d183fe5cdd3a5abee39cf872" },
+    { 6150, "89a3efcea9a2f25f919168ad4a1fd292" },
+    { 6400, "cdd176b7fb747873efa4da5e32bdf88f" },
+    { 6528, "b1d707b027354aca152c45ee559ccd3f" },
+    { 8192, "c600ea4429ac47f9941f09182166e51a" },
+    {16384, "16e8754bfbeb4c649218422792267a37" },
+    {18432, "0fd0607521b0aa8b52219cfbe215f63e" },
+    { 0, NULL },
+};
+
+/* Key         = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
+ *               0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10
+ * InputHexStr = "31323334353637383930" (ASCII = "1234567890")
+ */
+static MV_CESA_SIZE_TEST     mdMultiSizeTest304[] =
+{
+    { 80,   "a456c4723fee6068530af5a2afa71627" },
+    { 512,  "f85c2a2344f5de68b432208ad13e5794" },
+    { 1000, "35464d6821fd4a293a41eb84e274c8c5" },
+    { 1001, "c08eedbdce60cceb54bc2d732bb32c8b" },
+    { 1002, "5664f71800c011cc311cb6943339c1b8" },
+    { 1003, "779c723b044c585dc7802b13e8501bdc" },
+    { 1004, "55e500766a2c307bc5c5fdd15e4cacd4" },
+    { 1005, "d5f978954f5c38529d1679d2b714f068" },
+    { 1006, "cd3efc827ce628b7281b72172693abf9" },
+    { 1336, "6f04479910785878ae6335b8d1e87edf" },
+    { 1344, "b6d27b50c2bce1ba2a8e1b5cc4324368" },
+    { 1399, "65f70a1d4c86e5eaeb0704c8a7816795" },
+    { 1400, "3394b5adc4cb3ff98843ca260a44a88a" },
+    { 1401, "3a06f3582033a66a4e57e0603ce94e74" },
+    { 1402, "e4d97f5ed51edc48abfa46eeb5c31752" },
+    { 1403, "3d05e40b080ee3bedf293cb87b7140e7" },
+    { 1404, "8cf294fc3cd153ab18dccb2a52cbf244" },
+    { 1405, "d1487bd42f6edd9b4dab316631159221" },
+    { 1406, "0527123b6bf6936cf5d369dc18c6c70f" },
+    { 1407, "3224a06639db70212a0cd1ae1fcc570a" },
+    { 1408, "a9e13335612c0356f5e2c27086e86c43" },
+    { 1409, "a86d1f37d1ed8a3552e9a4f04dceea98" },
+    { 2048, "396905c9b961cd0f6152abfb69c4449c" },
+    { 2049, "49f39bff85d9dcf059fadb89efc4a70f" },
+    { 2050, "3a2b4823bc4d0415656550226a63e34a" },
+    { 2051, "dec60580d406c782540f398ad0bcc7e0" },
+    { 2052, "32f76610a14310309eb748fe025081bf" },
+    { 3072, "45edc1a42bf9d708a621076b63b774da" },
+    { 3074, "9be1b333fe7c0c9f835fb369dc45f778" },
+    { 3075, "8c06fcac7bd0e7b7a17fd6508c09a549" },
+    { 4048, "0ddaef848184bf0ad98507a10f1e90e4" },
+    { 4052, "81976bcaeb274223983996c137875cb8" },
+    { 4058, "0b0a7a1c82bc7cbc64d8b7cd2dc2bb22" },
+    { 6144, "1c24056f52725ede2dff0d7f9fc9855f" },
+    { 6150, "b7f4b65681c4e43ee68ca466ca9ca4ec" },
+    { 6400, "443bbaab9f7331ddd4bf11b659cd43c8" },
+    { 6528, "216f44f23047cfee03a7a64f88f9a995" },
+    { 8192, "ac7a993b2cad54879dba1bde63e39097" },
+    { 8320, "55ed7be9682d6c0025b3221a62088d08" },
+    {16384, "c6c722087653b62007aea668277175e5" },
+    {18432, "f1faca8e907872c809e14ffbd85792d6" },
+    { 0, NULL },
+};
+
+/* HASH-MD5
+ * InputHexStr = "31323334353637383930" (ASCII = "1234567890")
+ *               repeated "size" times
+ */
+static MV_CESA_SIZE_TEST     mdMultiSizeTest305[] =
+{
+    { 80,   "57edf4a22be3c955ac49da2e2107b67a" },
+    { 512,  "c729ae8f0736cc377a9767a660eaa04e" },
+    { 1000, "f1257a8659eb92d36fe14c6bf3852a6a" },
+    { 1001, "f8a46fe8ea04fdc8c7de0e84042d3878" },
+    { 1002, "da188dd67bff87d58aa3c02af2d0cc0f" },
+    { 1003, "961753017feee04c9b93a8e51658a829" },
+    { 1004, "dd68c4338608dcc87807a711636bf2af" },
+    { 1005, "e338d567d3ce66bf69ada29658a8759b" },
+    { 1006, "443c9811e8b92599b0b149e8d7ec700a" },
+    { 1336, "89a98511706008ba4cbd0b4a24fa5646" },
+    { 1344, "335a919805f370b9e402a62c6fe01739" },
+    { 1399, "5d18d0eddcd84212fe28d812b5e80e3b" },
+    { 1400, "6b695c240d2dffd0dffc99459ca76db6" },
+    { 1401, "49590f61298a76719bc93a57a30136f5" },
+    { 1402, "94c2999fa3ef1910a683d69b2b8476f2" },
+    { 1403, "37073a02ab00ecba2645c57c228860db" },
+    { 1404, "1bcd06994fce28b624f0c5fdc2dcdd2b" },
+    { 1405, "11b93671a64c95079e8cf9e7cddc8b3d" },
+    { 1406, "4b6695772a4c66313fa4871017d05f36" },
+    { 1407, "d1539b97fbfda1c075624e958de19c5b" },
+    { 1408, "b801b9b69920907cd018e8063092ede9" },
+    { 1409, "b765f1406cfe78e238273ed01bbcaf7e" },
+    { 2048, "1d7e2c64ac29e2b3fb4c272844ed31f5" },
+    { 2049, "71d38fac49c6b1f4478d8d88447bcdd0" },
+    { 2050, "141c34a5592b1bebfa731e0b23d0cdba" },
+    { 2051, "c5e1853f21c59f5d6039bd13d4b380d8" },
+    { 2052, "dd44a0d128b63d4b5cccd967906472d7" },
+    { 3072, "37d158e33b21390822739d13db7b87fe" },
+    { 3074, "aef3b209d01d39d0597fe03634bbf441" },
+    { 3075, "335ffb428eabf210bada96d74d5a4012" },
+    { 4048, "2434c2b43d798d2819487a886261fc64" },
+    { 4052, "ac2fa84a8a33065b2e92e36432e861f8" },
+    { 4058, "856781f85616c341c3533d090c1e1e84" },
+    { 6144, "e5d134c652c18bf19833e115f7a82e9b" },
+    { 6150, "a09a353be7795fac2401dac5601872e6" },
+    { 6400, "08b9033ac6a1821398f50af75a2dbc83" },
+    { 6528, "3d47aa193a8540c091e7e02f779e6751" },
+    { 8192, "d3164e710c0626f6f395b38f20141cb7" },
+    { 8320, "b727589d9183ff4e8491dd24466974a3" },
+    {16384, "3f54d970793d2274d5b20d10a69938ac" },
+    {18432, "f558511dcf81985b7a1bb57fad970531" },
+    { 0, NULL },
+};
+
+
+/* Key         = 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
+ *               0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa
+ *               0xaa, 0xaa, 0xaa, 0xaa
+ * InputHexStr = "31323334353637383930" (ASCII = "1234567890")
+ */
+static MV_CESA_SIZE_TEST     shaMultiSizeTest402[] =
+{
+    { 80,   "e812f370e659705a1649940d1f78cd7af18affd3" },
+    { 512,  "e547f886b2c15d995ed76a8a924cb408c8080f66" },
+    { 1000, "239443194409f1a5342ecde1a092c8f3a3ed790a" },
+    { 1001, "f278ab9a102850a9f48dc4e9e6822afe2d0c52b5" },
+    { 1002, "8bcc667df5ab6ece988b3af361d09747c77f4e72" },
+    { 1003, "0fae6046c7dc1d3e356b25af836f6077a363f338" },
+    { 1004, "0ea48401cc92ae6bc92ae76685269cb0167fbe1a" },
+    { 1005, "ecbcd7c879b295bafcd8766cbeac58cc371e31d1" },
+    { 1006, "eb4a4a3d07d1e9a15e6f1ab8a9c47f243e27324c" },
+    { 1336, "f5950ee1d77c10e9011d2149699c9366fe52529c" },
+    { 1344, "b04263604a63c351b0b3b9cf1785b4bdba6c8838" },
+    { 1399, "8cb1cff61d5b784045974a2fc69386e3b8d24218" },
+    { 1400, "9bb2f3fcbeddb2b90f0be797cd647334a2816d51" },
+    { 1401, "23ae462a7a0cb440f7445791079a5d75a535dd33" },
+    { 1402, "832974b524a4d3f9cc2f45a3cabf5ccef65cd2aa" },
+    { 1403, "d1c683742fe404c3c20d5704a5430e7832a7ec95" },
+    { 1404, "867c79042e64f310628e219d8b85594cd0c7adc3" },
+    { 1405, "c9d81d49d13d94358f56ccfd61af02b36c69f7c3" },
+    { 1406, "0df43daab2786172f9b8d07d61f14a070cf1287a" },
+    { 1407, "0fd8f3ad7f169534b274d4c66bbddd89f759e391" },
+    { 1408, "3987511182b18473a564436003139b808fa46343" },
+    { 1409, "ef667e063c9e9f539a8987a8d0bd3066ee85d901" },
+    { 2048, "921109c99f3fedaca21727156d5f2b4460175327" },
+    { 2049, "47188600dd165eb45f27c27196d3c46f4f042c1b" },
+    { 2050, "8831939904009338de10e7fa670847041387807d" },
+    { 2051, "2f8ebb5db2997d614e767be1050366f3641e7520" },
+    { 2052, "669e51cd730dae158d3bef8adba075bd95a0d011" },
+    { 3072, "cfee66cfd83abc8451af3c96c6b35a41cc6c55f5" },
+    { 3074, "216ea26f02976a261b7d21a4dd3085157bedfabd" },
+    { 3075, "bd612ebba021fd8e012b14c3bd60c8c5161fabc0" },
+    { 4048, "c2564c1fdf2d5e9d7dde7aace2643428e90662e8" },
+    { 4052, "91ce61fe924b445dfe7b5a1dcd10a27caec16df6" },
+    { 4058, "db2a9be5ee8124f091c7ebd699266c5de223c164" },
+    { 6144, "855109903feae2ba3a7a05a326b8a171116eb368" },
+    { 6150, "37520bb3a668294d9c7b073e7e3daf8fee248a78" },
+    { 6400, "60a353c841b6d2b1a05890349dad2fa33c7536b7" },
+    { 6528, "9e53a43a69bb42d7c8522ca8bd632e421d5edb36" },
+    { 8192, "a918cb0da862eaea0a33ee0efea50243e6b4927c" },
+    { 8320, "29a5dcf55d1db29cd113fcf0572ae414f1c71329" },
+    {16384, "6fb27966138e0c8d5a0d65ace817ebd53633cee1" },
+    {18432, "ca09900d891c7c9ae2a559b10f63a217003341c1" },
+    { 0, NULL },
+};
+
+/* Key         = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
+ *               0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10
+ *               0x11, 0x12, 0x13, 0x14
+ * InputHexStr = "31323334353637383930" (ASCII = "1234567890")
+ */
+static MV_CESA_SIZE_TEST     shaMultiSizeTest404[] =
+{
+    { 80,   "beaf20a34b06a87558d156c0949bc3957d40222e" },
+    { 512,  "3353955358d886bc2940a3c7f337ff7dafb59c7b" },
+    { 1000, "8737a542c5e9b2b6244b757ebb69d5bd602a829f" },
+    { 1001, "fd9e7582d8a5d3c9fe3b923e4e6a41b07a1eb4d4" },
+    { 1002, "a146d14a6fc3c274ff600568f4d75b977989e00d" },
+    { 1003, "be22601bbc027ddef2dec97d30b3dc424fd803c5" },
+    { 1004, "3e71fe99b2fe2b7bfdf4dbf0c7f3da25d7ea35e7" },
+    { 1005, "2c422735d7295408fddd76f5e8a83a2a8da13df3" },
+    { 1006, "6d875319049314b61855101a647b9ba3313428e6" },
+    { 1336, "c1631ea80bad9dc43a180712461b65a0598c711c" },
+    { 1344, "816069bf91d34581005746e2e0283d0f9c7b7605" },
+    { 1399, "4e139866dc61cfcb8b67ca2ebd637b3a538593af" },
+    { 1400, "ff2a0f8dd2b02c5417910f6f55d33a78e081a723" },
+    { 1401, "ab00c12be62336964cbce31ae97fe2a0002984d5" },
+    { 1402, "61349e7f999f3a1acc56c3e9a5060a9c4a7b05b6" },
+    { 1403, "3edbc0f61e435bc1317fa27d840076093fb79353" },
+    { 1404, "d052c6dfdbe63d45dab23ef9893e2aa4636aca1e" },
+    { 1405, "0cc16b7388d67bf0add15a31e6e6c753cfae4987" },
+    { 1406, "c96ba7eaad74253c38c22101b558d2850b1d1b90" },
+    { 1407, "3445428a40d2c6556e7c55797ad8d323b61a48d9" },
+    { 1408, "8d6444f937a09317c89834187b8ea9b8d3a8c56b" },
+    { 1409, "c700acd3ecd19014ea2bdb4d42510c467e088475" },
+    { 2048, "ee27d2a0cb77470c2f496212dfd68b5bb7b04e4b" },
+    { 2049, "683762d7a02983b26a6d046e6451d9cd82c25932" },
+    { 2050, "0fd20f1d55a9ee18363c2a6fd54aa13aee69992f" },
+    { 2051, "86c267d8cc4bc8d59090e4f8b303da960fd228b7" },
+    { 2052, "452395ae05b3ec503eea34f86fc0832485ad97c1" },
+    { 3072, "75198e3cfd0b9bcff2dabdf8e38e6fdaa33ca49a" },
+    { 3074, "4e24785ef080141ce4aab4675986d9acea624d7c" },
+    { 3075, "3a20c5978dd637ec0e809bf84f0d9ccf30bc65bf" },
+    { 4048, "3c32da256be7a7554922bf5fed51b0d2d09e59ad" },
+    { 4052, "fff898426ea16e54325ae391a32c6c9bce4c23c0" },
+    { 4058, "c800b9e562e1c91e1310116341a3c91d37f848ec" },
+    { 6144, "d91d509d0cc4376c2d05bf9a5097717a373530e6" },
+    { 6150, "d957030e0f13c5df07d9eec298542d8f94a07f12" },
+    { 6400, "bb745313c3d7dc17b3f955e5534ad500a1082613" },
+    { 6528, "77905f80d9ca82080bbb3e5654896dabfcfd1bdb" },
+    { 8192, "5237fd9a81830c974396f99f32047586612ff3c0" },
+    { 8320, "57668e28d5f2dba0839518a11db0f6af3d7e08bf" },
+    {16384, "62e093fde467f0748087beea32e9af97d5c61241" },
+    {18432, "845fb33130c7d6ea554fd5aacb9c50cf7ccb5929" },
+    { 0, NULL },
+};
+
+/* HASH-SHA1
+ * InputHexStr = "31323334353637383930" (ASCII = "1234567890")
+ *               repeated "size" times
+ */
+static MV_CESA_SIZE_TEST     shaMultiSizeTest405[] =
+{
+    { 80,   "50abf5706a150990a08b2c5ea40fa0e585554732" },
+    { 512,  "f14516a08948fa27917a974d219741a697ba0087" },
+    { 1000, "0bd18c378d5788817eb4f1e5dc07d867efa5cbf4" },
+    { 1001, "ca29b85c35db1b8aef83c977893a11159d1b7aa2" },
+    { 1002, "d83bc973eaaedb8a31437994dabbb3304b0be086" },
+    { 1003, "2cf7bbef0acd6c00536b5c58ca470df9a3a90b6c" },
+    { 1004, "e4375d09b1223385a8a393066f8209acfd936a80" },
+    { 1005, "1029b38043e027745d019ce1d2d68e3d8b9d8f99" },
+    { 1006, "deea16dcebbd8ac137e2b984deb639b9fb5e9680" },
+    { 1336, "ea031b065fff63dcfb6a41956e4777520cdbc55d" },
+    { 1344, "b52096c6445e6c0a8355995c70dc36ae186c863c" },
+    { 1399, "cde2f6f8379870db4b32cf17471dc828a8dbff2b" },
+    { 1400, "e53ff664064bc09fe5054c650806bd42d8179518" },
+    { 1401, "d1156db5ddafcace64cdb510ff0d4af9b9a8ad64" },
+    { 1402, "34ede0e9a909dd84a2ae291539105c0507b958e1" },
+    { 1403, "a772ca3536da77e6ad3251e4f9e1234a4d7b87c0" },
+    { 1404, "29740fd2b04e7a8bfd32242db6233156ad699948" },
+    { 1405, "65b17397495b70ce4865dad93bf991b74c97cce1" },
+    { 1406, "a7ee89cd0754061fdb91af7ea6abad2c69d542e3" },
+    { 1407, "3eebf82f7420188e23d328b7ce93580b279a5715" },
+    { 1408, "e08d3363a8b9a490dfb3a4c453452b8f114deeec" },
+    { 1409, "95d74df739181a4ff30b8c39e28793a36598e924" },
+    { 2048, "aa40262509c2abf84aab0197f83187fc90056d91" },
+    { 2049, "7dec28ef105bc313bade8d9a7cdeac58b99de5ea" },
+    { 2050, "d2e30f77ec81197de20f56588a156094ecb88450" },
+    { 2051, "6b22ccc874833e96551a39da0c0edcaa0d969d92" },
+    { 2052, "f843141e57875cd669af58744bc60aa9ea59549c" },
+    { 3072, "09c5fedeaa62c132e673cc3c608a00142273d086" },
+    { 3074, "b09e95eea9c7b1b007a58accec488301901a7f3d" },
+    { 3075, "e6226b77b4ada287a8c9bbcf4ed71eec5ce632dc" },
+    { 4048, "e99394894f855821951ddddf5bfc628547435f5c" },
+    { 4052, "32d2f1af38be9cfba6cd03d55a254d0b3e1eb382" },
+    { 4058, "d906552a4f2aca3a22e1fecccbcd183d7289d0ef" },
+    { 6144, "2e7f62d35a860988e1224dc0543204af19316041" },
+    { 6150, "d6b89698ee133df46fec9d552fadc328aa5a1b51" },
+    { 6400, "dff50e90c46853988fa3a4b4ce5dda6945aae976" },
+    { 6528, "9e63ec0430b96db02d38bc78357a2f63de2ab7f8" },
+    { 8192, "971eb71ed60394d5ab5abb12e88420bdd41b5992" },
+    { 8320, "91606a31b46afeaac965cecf87297e791b211013" },
+    {16384, "547f830a5ec1f5f170ce818f156b1002cabc7569" },
+    {18432, "f16f272787f3b8d539652e4dc315af6ab4fda0ef" },
+    { 0, NULL },
+};
+
+/* CryptoKey   = 0x01234567, 0x89abcdef,
+ *               0x01234567, 0x89abcdef,
+ *               0x01234567, 0x89abcdef;
+ * MacKey      = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
+ *               0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10
+ * InputHexStr = "31323334353637383930" (ASCII = "1234567890")
+ * Note: only sizes aligned to 3DES block size (8 bytes) allowed
+ */
+static MV_CESA_SIZE_TEST     tripleDesMdMultiSizeTest502[] =
+{
+    {   64, "9586962a2aaaef28803dec2e17807a7f" },
+    {   80, "b7726a03aad490bd6c5a452a89a1b271" },
+    {  352, "f1ed9563aecc3c0d2766eb2bed3b4e4c" },
+    {  512, "0f9decb11ab40fe86f4d4d9397bc020e" },
+    { 1000, "3ba69deac12cab8ff9dff7dbd9669927" },
+    { 1336, "6cf47bf1e80e03e2c1d0945bc50d37d2" },
+    { 1344, "4be388dab21ceb3fa1b8d302e9b821f7" },
+    { 1400, "a58b79fb21dd9bfc6ec93e3b99fb0ef1" },
+    { 1408, "8bc97379fc2ac3237effcdd4f7a86528" },
+    { 2048, "1339f03ab3076f25a20bc4cba16eb5bf" },
+    { 3072, "731204d2d90c4b36ae41f5e1fb874288" },
+    { 4048, "c028d998cfda5642547b7e1ed5ea16e4" },
+    { 6144, "b1b19cd910cc51bd22992f1e59f1e068" },
+    { 6400, "44e4613496ba622deb0e7cb768135a2f" },
+    { 6528, "3b06b0a86f8db9cd67f9448dfcf10549" },
+    { 8192, "d581780b7163138a0f412be681457d82" },
+    {16384, "03b8ac05527faaf1bed03df149c65ccf" },
+    {18432, "677c8a86a41dab6c5d81b85b8fb10ff6" },
+    { 0, NULL },
+};
+
+
+/* CryptoKey   = 0x01234567, 0x89abcdef,
+ *               0x01234567, 0x89abcdef,
+ *               0x01234567, 0x89abcdef;
+ * MacKey      = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
+ *               0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10
+ *               0x11, 0x12, 0x13, 0x14
+ * InputHexStr = "31323334353637383930" (ASCII = "1234567890")
+ * Note: only sizes aligned to 3DES block size (8 bytes) allowed
+ */
+static MV_CESA_SIZE_TEST     tripleDesShaMultiSizeTest503[] =
+{
+    {   64, "44a1e9bcbfc1429630d9ea68b7a48b0427a684f2" },
+    {   80, "b2ddeaca91030eab5b95a234ef2c0f6e738ff883" },
+    {  352, "4b91864c7ff629bdff75d9726421f76705452aaf" },
+    {  512, "6dd37faceeb2aa98ba74f4242ed6734a4d546af5" },
+    { 1000, "463661c30300be512a9df40904f0757cde5f1141" },
+    { 1336, "b931f831d9034fe59c65176400b039fe9c1f44a5" },
+    { 1344, "af8866b1cd4a4887d6185bfe72470ffdfb3648e1" },
+    { 1400, "49c6caf07296d5e31d2504d088bc5b20c3ee7cdb" },
+    { 1408, "fcae8deedbc6ebf0763575dc7e9de075b448a0f4" },
+    { 2048, "edece5012146c1faa0dd10f50b183ba5d2af58ac" },
+    { 3072, "5b83625adb43a488b8d64fecf39bb766818547b7" },
+    { 4048, "d2c533678d26c970293af60f14c8279dc708bfc9" },
+    { 6144, "b8f67af4f991b08b725f969b049ebf813bfacc5c" },
+    { 6400, "d9a6c7f746ac7a60ef2edbed2841cf851c25cfb0" },
+    { 6528, "376792b8c8d18161d15579fb7829e6e3a27e9946" },
+    { 8192, "d890eabdca195b34ef8724b28360cffa92ae5655" },
+    {16384, "a167ee52639ec7bf19aee9c6e8f76667c14134b9" },
+    {18432, "e4396ab56f67296b220985a12078f4a0e365d2cc" },
+    { 0, NULL },
+};
+
+/* CryptoKey   = 0x01234567, 0x89abcdef,
+ *               0x01234567, 0x89abcdef,
+ *               0x01234567, 0x89abcdef
+ * IV          = 0x12345678, 0x90abcdef
+ * MacKey      = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
+ *               0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10
+ * InputHexStr = "31323334353637383930" (ASCII = "1234567890")
+ * Note: only sizes aligned to 3DES block size (8 bytes) allowed
+ */
+static MV_CESA_SIZE_TEST     cbc3desMdMultiSizeTest504[] =
+{
+    {   64, "8d10e00802460ede0058c139ba48bd2d" },
+    {   80, "6f463057e1a90e0e91ae505b527bcec0" },
+    {  352, "4938d48bdf86aece2c6851e7c6079788" },
+    {  512, "516705d59f3cf810ebf2a13a23a7d42e" },
+    { 1000, "a5a000ee5c830e67ddc6a2d2e5644b31" },
+    { 1336, "44af60087b74ed07950088efbe3b126a" },
+    { 1344, "1f5b39e0577920af731dabbfcf6dfc2a" },
+    { 1400, "6804ea640e29b9cd39e08bc37dbce734" },
+    { 1408, "4fb436624b02516fc9d1535466574bf9" },
+    { 2048, "c909b0985c423d8d86719f701e9e83db" },
+    { 3072, "cfe0bc34ef97213ee3d3f8b10122db21" },
+    { 4048, "03ea10b5ae4ddeb20aed6af373082ed1" },
+    { 6144, "b9a0ff4f87fc14b3c2dc6f0ed0998fdf" },
+    { 6400, "6995f85d9d4985dd99e974ec7dda9dd6" },
+    { 6528, "bbbb548ce2fa3d58467f6a6a5168a0e6" },
+    { 8192, "afe101fbe745bb449ae4f50d10801456" },
+    {16384, "9741706d0b1c923340c4660ff97cacdf" },
+    {18432, "b0217becb73cb8f61fd79c7ce9d023fb" },
+    { 0, NULL },
+};
+
+
+/* CryptoKey   = 0x01234567, 0x89abcdef,
+ *               0x01234567, 0x89abcdef,
+ *               0x01234567, 0x89abcdef;
+ * IV          = 0x12345678, 0x90abcdef
+ * MacKey      = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
+ *               0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10
+ *               0x11, 0x12, 0x13, 0x14
+ * InputHexStr = "31323334353637383930" (ASCII = "1234567890")
+ * Note: only sizes aligned to 3DES block size (8 bytes) allowed
+ */
+static MV_CESA_SIZE_TEST     cbc3desShaMultiSizeTest505[] =
+{
+    {   64, "409187e5bdb0be4a7754ca3747f7433dc4f01b98" },
+    {   80, "1b002ed050be743aa98860cf35659646bb8efcc0" },
+    {  352, "6cbf7ebe50fa4fa6eecc19eca23f9eae553ccfff" },
+    {  512, "cfb5253fb4bf72b743320c30c7e48c54965853b0" },
+    { 1000, "95e04e1ca2937e7c5a9aba9e42d2bcdb8a7af21f" },
+    { 1336, "3b5c1f5eee5837ebf67b83ae01405542d77a6627" },
+    { 1344, "2b3d42ab25615437f98a1ee310b81d07a02badc2" },
+    { 1400, "7f8687df7c1af44e4baf3c934b6cca5ab6bc993e" },
+    { 1408, "473a581c5f04f7527d50793c845471ac87e86430" },
+    { 2048, "e41d20cae7ebe34e6e828ed62b1e5734019037bb" },
+    { 3072, "275664afd7a561d804e6b0d204e53939cde653ae" },
+    { 4048, "0d220cc5b34aeeb46bbbd637dde6290b5a8285a3" },
+    { 6144, "cb393ddcc8b1c206060625b7d822ef9839e67bc5" },
+    { 6400, "dd3317e2a627fc04800f74a4b05bfda00fab0347" },
+    { 6528, "8a74c3b2441ab3f5a7e08895cc432566219a7c41" },
+    { 8192, "b8e6ef3a549ed0e005bd5b8b1a5fe6689e9711a7" },
+    {16384, "55f59404008276cdac0e2ba0d193af2d40eac5ce" },
+    {18432, "86ae6c4fc72369a54cce39938e2d0296cd9c6ec5" },
+    { 0, NULL },
+};
+
+
+/* CryptoKey   = 0x01234567, 0x89abcdef,
+ *               0x01234567, 0x89abcdef,
+ *               0x01234567, 0x89abcdef
+ * IV          = 0x12345678, 0x90abcdef
+ * MacKey      = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
+ *               0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10
+ * InputHexStr = "31323334353637383930" (ASCII = "1234567890")
+ * Note: only sizes aligned to AES block size (16 bytes) allowed
+ */
+static MV_CESA_SIZE_TEST     cbcAes128md5multiSizeTest506[] =
+{
+    {   16, "7ca4c2ba866751598720c5c4aa0d6786" },
+    {   64, "7dba7fb988e80da609b1fea7254bced8" },
+    {   80, "6b6e863ac5a71d15e3e9b1c86c9ba05f" },
+    {  352, "a1ceb9c2e3021002400d525187a9f38c" },
+    {  512, "596c055c1c55db748379223164075641" },
+    { 1008, "f920989c02f3b3603f53c99d89492377" },
+    { 1344, "2e496b73759d77ed32ea222dbd2e7b41" },
+    { 1408, "7178c046b3a8d772efdb6a71c4991ea4" },
+    { 2048, "a917f0099c69eb94079a8421714b6aad" },
+    { 3072, "693cd5033d7f5391d3c958519fa9e934" },
+    { 4048, "139dca91bcff65b3c40771749052906b" },
+    { 6144, "428d9cef6df4fb70a6e9b6bbe4819e55" },
+    { 6400, "9c0b909e76daa811e12b1fc17000a0c4" },
+    { 6528, "ad876f6297186a7be1f1b907ed860eda" },
+    { 8192, "479cbbaca37dd3191ea1f3e8134a0ef4" },
+    {16384, "60fda559c74f91df538100c9842f2f15" },
+    {18432, "4a3eb1cba1fa45f3981270953f720c42" },
+    { 0, NULL },
+};
+
+
+/* CryptoKey   = 0x01234567, 0x89abcdef,
+ *               0x01234567, 0x89abcdef,
+ *               0x01234567, 0x89abcdef;
+ * IV          = 0x12345678, 0x90abcdef
+ * MacKey      = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
+ *               0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10
+ *               0x11, 0x12, 0x13, 0x14
+ * InputHexStr = "31323334353637383930" (ASCII = "1234567890")
+ * Note: only sizes aligned to AES block size (16 bytes) allowed
+ */
+static MV_CESA_SIZE_TEST     cbcAes128sha1multiSizeTest507[] =
+{
+    {   16, "9aa8dc1c45f0946daf78057fa978759c625c1fee" },
+    {   64, "9f588fc1ede851e5f8b20256abc9979465ae2189" },
+    {   80, "13558472d1fc1c90dffec6e5136c7203452d509b" },
+    {  352, "6b93518e006cfaa1f7adb24615e7291fb0a27e06" },
+    {  512, "096874951a77fbbf333e49d80c096ee2016e09bd" },
+    { 1008, "696fc203c2e4b5ae0ec5d1db3f623c490bc6dbac" },
+    { 1344, "79bf77509935ccd3528caaac6a5eb6481f74029b" },
+    { 1408, "627f9462b95fc188e8cfa7eec15119bdc5d4fcf1" },
+    { 2048, "3d50d0c005feba92fe41502d609fced9c882b4d1" },
+    { 3072, "758807e5b983e3a91c06fb218fe0f73f77111e94" },
+    { 4048, "ca90e85242e33f005da3504416a52098d0d31fb2" },
+    { 6144, "8044c1d4fd06642dfc46990b4f18b61ef1e972cf" },
+    { 6400, "166f1f4ea57409f04feba9fb1e39af0e00bd6f43" },
+    { 6528, "0389016a39485d6e330f8b4215ddf718b404f7e9" },
+    { 8192, "6df7ee2a8b61d6f7f860ce8dbf778f0c2a5b508b" },
+    {16384, "a70a6d8dfa1f91ded621c3dbaed34162bc48783f" },
+    {18432, "8dfad627922ce15df1eed10bdbed49244efa57db" },
+    { 0, NULL },
+};
+
+
+void    cesaTestPrintStatus(void);
+
+
+/*------------------------- LOCAL FUNCTIONs ---------------------------------*/
+MV_STATUS testCmd(int sid, int iter, MV_CESA_COMMAND* pCmd,
+                  MV_CESA_TEST_SESSION* pTestSession, MV_U8* pIV, int ivSize);
+MV_STATUS testClose(int idx);
+MV_STATUS testOpen(int idx);
+void close_session(int sid);
+void cesaTestCheckReady(const MV_CESA_RESULT *r);
+void cesaCheckReady(MV_CESA_RESULT* r);
+void printTestResults(int idx, MV_STATUS status, int checkMode);
+void cesaLastResult(void);
+void cesaTestPrintReq(int req, int offset, int size);
+
+void cesaTestPrintStatus(void);
+void cesaTestPrintSession(int idx);
+void sizeTest(int testIdx, int iter, int checkMode);
+void multiTest(int iter, int reqSize, int checkMode);
+void oneTest(int testIdx, int caseIdx,int iter, int reqSize, int checkMode);
+void multiSizeTest(int idx, int iter, int checkMode, char* inputData);
+void cesaTest(int iter, int reqSize, int checkMode);
+void cesaOneTest(int testIdx, int caseIdx,int iter, int reqSize, int checkMode);
+void combiTest(int iter, int reqSize, int checkMode);
+void shaTest(int iter, int reqSize, int checkMode);
+void mdTest(int iter, int reqSize, int checkMode);
+void aesTest(int iter, int reqSize, int checkMode);
+void tripleDesTest(int iter, int reqSize, int checkMode);
+void desTest(int iter, int reqSize, int checkMode);
+void cesaTestStop(void);
+MV_STATUS testRun(int idx, int caseIdx, int iter,int reqSize, int checkMode);
+void cesaTestStart(int bufNum, int bufSize);
+
+
+static MV_U32      getRate(MV_U32* remainder)
+{
+    MV_U32     kBits, milliSec, rate;
+
+    milliSec = 0;
+    if( (cesaEndTicks - cesaBeginTicks) > 0)
+    {
+        milliSec = CESA_TEST_TICK_TO_MS(cesaEndTicks - cesaBeginTicks);
+    }
+    if(milliSec == 0)
+    {
+        if(remainder != NULL)
+            *remainder = 0;
+        return 0;
+    }
+
+    kBits = (cesaIteration*cesaRateSize*8)/1000;
+    rate = kBits/milliSec;
+    if(remainder != NULL)
+        *remainder = ((kBits % milliSec)*10)/milliSec;
+
+    return rate;
+}
+
+static char*    extractMbuf(MV_CESA_MBUF *pMbuf,
+                            int offset, int size, char* hexStr)
+{
+    mvCesaCopyFromMbuf((MV_U8*)cesaBinBuffer, pMbuf, offset, size);
+    mvBinToHex((const MV_U8*)cesaBinBuffer, hexStr, size);
+
+    return hexStr;
+}
+
+static MV_BOOL  cesaCheckMbuf(MV_CESA_MBUF *pMbuf,
+                          const char* hexString, int offset,
+                          int checkSize)
+{
+    MV_BOOL     isFailed = MV_FALSE;
+    MV_STATUS   status;
+    int         size = strlen(hexString)/2;
+    int         checkedSize = 0;
+/*
+    mvOsPrintf("cesaCheckMbuf: pMbuf=%p, offset=%d, checkSize=%d, mBufSize=%d\n",
+                pMbuf, offset, checkSize, pMbuf->mbufSize);
+*/
+    if(pMbuf->mbufSize < (checkSize + offset))
+    {
+        mvOsPrintf("checkSize (%d) is too large: offset=%d, mbufSize=%d\n",
+                    checkSize, offset, pMbuf->mbufSize);
+        return MV_TRUE;
+    }
+    status = mvCesaCopyFromMbuf((MV_U8*)cesaBinBuffer, pMbuf, offset, checkSize);
+    if(status != MV_OK)
+    {
+        mvOsPrintf("CesaTest: Can't copy %d bytes from Mbuf=%p to checkBuf=%p\n",
+                    checkSize, pMbuf, cesaBinBuffer);
+        return MV_TRUE;
+    }
+/*
+    mvDebugMemDump(cesaBinBuffer, size, 1);
+*/
+    mvHexToBin(hexString, (MV_U8*)cesaExpBinBuffer, size);
+
+    /* Compare buffers */
+    while(checkSize > checkedSize)
+    {
+        size = MV_MIN(size, (checkSize - checkedSize));
+        if(memcmp(cesaExpBinBuffer, &cesaBinBuffer[checkedSize], size) != 0)
+        {
+            mvOsPrintf("CheckMbuf failed: checkSize=%d, size=%d, checkedSize=%d\n",
+                        checkSize, size, checkedSize);
+            mvDebugMemDump(&cesaBinBuffer[checkedSize], size, 1);
+            mvDebugMemDump(cesaExpBinBuffer, size, 1);
+
+            isFailed = MV_TRUE;
+            break;
+        }
+        checkedSize += size;
+    }
+
+    return isFailed;
+}
+
+static MV_STATUS    cesaSetMbuf(MV_CESA_MBUF *pMbuf,
+                        const char* hexString,
+                        int offset, int reqSize)
+{
+    MV_STATUS   status = MV_OK;
+    int         copySize, size = strlen(hexString)/2;
+
+    mvHexToBin(hexString, (MV_U8*)cesaBinBuffer, size);
+
+    copySize = 0;
+    while(reqSize > copySize)
+    {
+        size = MV_MIN(size, (reqSize - copySize));
+
+        status = mvCesaCopyToMbuf((MV_U8*)cesaBinBuffer, pMbuf, offset+copySize, size);
+        if(status != MV_OK)
+        {
+            mvOsPrintf("cesaSetMbuf Error: Copy %d of %d bytes to MBuf\n",
+                        copySize, reqSize);
+            break;
+        }
+        copySize += size;
+    }
+    pMbuf->mbufSize = offset+copySize;
+    return status;
+}
+
+static  MV_CESA_TEST_SESSION* getTestSessionDb(int idx, int* pTestIdx)
+{
+    int                 testIdx, dbIdx = idx/100;
+
+    if(dbIdx > MAX_TEST_TYPE)
+    {
+        mvOsPrintf("Wrong index %d - No such test type\n", idx);
+        return NULL;
+    }
+    testIdx = idx % 100;
+
+    if(testIdx >= cesaTestsDB[dbIdx].numSessions)
+    {
+        mvOsPrintf("Wrong index %d - No such test\n", idx);
+        return NULL;
+    }
+    if(pTestIdx != NULL)
+        *pTestIdx = testIdx;
+
+    return  cesaTestsDB[dbIdx].pSessions;
+}
+
+/* Debug */
+void    cesaTestPrintReq(int req, int offset, int size)
+{
+    MV_CESA_MBUF*   pMbuf;
+
+    mvOsPrintf("cesaTestPrintReq: req=%d, offset=%d, size=%d\n", 
+                req, offset, size);
+    mvDebugMemDump(cesaCmdRing, 128, 4);
+
+    pMbuf = cesaCmdRing[req].pSrc;
+    mvCesaDebugMbuf("src", pMbuf, offset,size);
+    pMbuf = cesaCmdRing[req].pDst;
+    mvCesaDebugMbuf("dst", pMbuf, offset, size);
+
+    cesaTestPrintStatus();
+}
+
+void    cesaLastResult(void)
+{
+        mvOsPrintf("Last Result: ReqId = %d, SessionId = %d, rc = (%d)\n",
+                (MV_U32)cesaResult.pReqPrv, cesaResult.sessionId,
+                cesaResult.retCode);
+}
+
+void    printTestResults(int idx, MV_STATUS status, int checkMode)
+{
+    int                     testIdx;
+    MV_CESA_TEST_SESSION*   pTestSessions = getTestSessionDb(idx, &testIdx);
+
+    if(pTestSessions == NULL)
+        return;
+
+    mvOsPrintf("%-35s %4dx%-4d : ", pTestSessions[testIdx].name,
+            cesaIteration, cesaReqSize);
+    if( (status == MV_OK)      &&
+        (cesaCryptoError == 0) &&
+        (cesaError == 0)       &&
+        (cesaReqIdError == 0) )
+    {
+        mvOsPrintf("Passed, Rate=%3u.%u Mbps (%5u cpp)\n", 
+                     cesaRate, cesaRateAfterDot, cesaEndTicks - cesaBeginTicks);
+    }
+    else
+    {
+        mvOsPrintf("Failed, Status = 0x%x\n", status);
+        if(cesaCryptoError > 0)
+            mvOsPrintf("cryptoError : %d\n", cesaCryptoError);
+        if(cesaReqIdError > 0)
+            mvOsPrintf("reqIdError  : %d\n", cesaReqIdError);
+        if(cesaError > 0)
+            mvOsPrintf("cesaError  : %d\n", cesaError);
+    }
+    if(cesaTestIsrMissCount > 0)
+        mvOsPrintf("cesaIsrMissed  : %d\n", cesaTestIsrMissCount);
+}
+
+void cesaCheckReady(MV_CESA_RESULT* r)
+{
+    int             reqId;
+    MV_CESA_MBUF    *pMbuf;
+    MV_BOOL         isFailed;
+
+    cesaResult  =  *r;
+    reqId = (int)cesaResult.pReqPrv;
+    pMbuf = cesaCmdRing[reqId].pDst;
+
+/*
+    mvOsPrintf("cesaCheckReady: reqId=%d, checkOffset=%d, checkSize=%d\n",
+                    reqId, cesaCheckOffset, cesaCheckSize);
+*/
+    /* Check expected reqId */
+    if(reqId != cesaExpReqId)
+    {
+        cesaReqIdError++;
+/*
+        mvOsPrintf("CESA reqId Error: cbIter=%d (%d), reqId=%d, expReqId=%d\n",
+                    cesaCbIter, cesaIteration, reqId, cesaExpReqId);
+*/
+    }
+    else
+    {
+        if( (cesaCheckMode == CESA_FULL_CHECK_MODE) ||
+            (cesaCheckMode == CESA_FAST_CHECK_MODE) )
+        {
+            if(cesaResult.retCode != MV_OK)
+            {
+                cesaError++;
+
+                mvOsPrintf("CESA Error: cbIter=%d (%d), reqId=%d, rc=%d\n",
+                            cesaCbIter, cesaIteration, reqId, cesaResult.retCode);
+            }
+            else
+            {
+                if( (cesaCheckSize > 0) && (cesaOutputHexStr != NULL) )
+                {
+                    /* Check expected output */
+
+                    isFailed = cesaCheckMbuf(pMbuf, cesaOutputHexStr, cesaCheckOffset, cesaCheckSize);
+                    if(isFailed)
+                    {
+                        mvOsPrintf("CESA Crypto Error: cbIter=%d (%d), reqId=%d\n",
+                                    cesaCbIter, cesaIteration, reqId);
+
+                        CESA_TEST_DEBUG_PRINT(("Error: reqId=%d, reqSize=%d, checkOffset=%d, checkSize=%d\n",
+                                    reqId, cesaReqSize, cesaCheckOffset, cesaCheckSize));
+
+                        CESA_TEST_DEBUG_PRINT(("Output str: %s\n", cesaOutputHexStr));
+
+                        CESA_TEST_DEBUG_CODE( mvCesaDebugMbuf("error", pMbuf, 0, cesaCheckOffset+cesaCheckSize) );
+
+                        cesaCryptoError++;
+                    }
+                }
+            }
+        }
+    }
+    if(cesaCheckMode == CESA_SHOW_CHECK_MODE)
+    {
+        extractMbuf(pMbuf, cesaCheckOffset, cesaCheckSize, cesaHexBuffer);
+        mvOsPrintf("%4d, %s\n", cesaCheckOffset, cesaHexBuffer);
+    }
+
+    cesaCbIter++;
+    if(cesaCbIter >= cesaIteration)
+    {
+        cesaCbIter = 0;
+        cesaExpReqId = 0;
+        cesaIsReady = MV_TRUE;
+
+        cesaEndTicks = CESA_TEST_TICK_GET();
+        cesaRate = getRate(&cesaRateAfterDot);
+    }
+    else
+    {
+        cesaExpReqId = reqId + 1;
+        if(cesaExpReqId == CESA_DEF_REQ_SIZE)
+            cesaExpReqId = 0;
+    }
+}
+
+
+#ifdef MV_NETBSD
+static int cesaTestReadyIsr(void *arg)
+#else
+#ifdef __KERNEL__
+static irqreturn_t cesaTestReadyIsr( int irq , void *dev_id)
+#endif
+#ifdef MV_VXWORKS
+void   cesaTestReadyIsr(void)
+#endif
+#endif
+{
+    MV_U32          cause;
+    MV_STATUS       status;
+    MV_CESA_RESULT  result;
+
+    cesaTestIsrCount++;
+    /* Clear cause register */
+    cause = MV_REG_READ(MV_CESA_ISR_CAUSE_REG);
+    if( (cause & MV_CESA_CAUSE_ACC_DMA_ALL_MASK) == 0)
+    {
+        mvOsPrintf("cesaTestReadyIsr: cause=0x%x\n", cause);
+#ifdef MV_NETBSD
+        return 0;
+#else
+#ifdef __KERNEL__
+        return 1;
+#else
+        return;
+#endif
+#endif
+    }
+
+    MV_REG_WRITE(MV_CESA_ISR_CAUSE_REG, 0);
+
+    while(MV_TRUE)
+    {
+        /* Get Ready requests */
+        status = mvCesaReadyGet(&result);
+        if(status == MV_OK)
+            cesaCheckReady(&result);
+
+        break;
+    }
+    if( (cesaTestFull == 1) && (status != MV_BUSY) )
+    {
+        cesaTestFull = 0;
+        CESA_TEST_WAKE_UP();
+    }
+
+#ifdef __KERNEL__
+    return 1;
+#endif
+}
+
+void
+cesaTestCheckReady(const MV_CESA_RESULT *r)
+{
+	MV_CESA_RESULT result = *r;
+
+	cesaCheckReady(&result);
+
+	if (cesaTestFull == 1) {
+		cesaTestFull = 0;
+		CESA_TEST_WAKE_UP();
+	}
+}
+
+static INLINE int   open_session(MV_CESA_OPEN_SESSION* pOs)
+{
+    MV_U16      sid;
+    MV_STATUS   status;
+
+    status = mvCesaSessionOpen(pOs, (short*)&sid);
+    if(status != MV_OK)
+    {
+        mvOsPrintf("CesaTest: Can't open new session - status = 0x%x\n",
+                    status);
+        return -1;
+    }
+
+    return  (int)sid;
+}
+
+void close_session(int sid)
+{
+    MV_STATUS   status;
+
+    status = mvCesaSessionClose(sid);
+    if(status != MV_OK)
+    {
+        mvOsPrintf("CesaTest: Can't close session %d - status = 0x%x\n",
+                    sid, status);
+    }
+}
+
+MV_STATUS testOpen(int idx)
+{
+    MV_CESA_OPEN_SESSION    os;
+    int                     sid, i, testIdx;
+    MV_CESA_TEST_SESSION*   pTestSession;
+    MV_U16          digestSize = 0;
+
+    pTestSession = getTestSessionDb(idx, &testIdx);
+    if(pTestSession == NULL)
+    {
+        mvOsPrintf("Test %d is not exist\n", idx);
+        return MV_BAD_PARAM;
+    }
+    pTestSession = &pTestSession[testIdx];
+
+    if(pTestSession->sid != -1)
+    {
+        mvOsPrintf("Session for test %d already created: sid=%d\n",
+                    idx, pTestSession->sid);
+        return MV_OK;
+    }
+
+    os.cryptoAlgorithm = pTestSession->cryptoAlgorithm;
+    os.macMode = pTestSession->macAlgorithm;
+    switch(os.macMode)
+    {
+        case MV_CESA_MAC_MD5:
+        case MV_CESA_MAC_HMAC_MD5:
+            digestSize = MV_CESA_MD5_DIGEST_SIZE;
+            break;
+
+        case MV_CESA_MAC_SHA1:
+        case MV_CESA_MAC_HMAC_SHA1:
+            digestSize = MV_CESA_SHA1_DIGEST_SIZE;
+            break;
+
+        case MV_CESA_MAC_NULL:
+            digestSize = 0;
+    }
+    os.cryptoMode = pTestSession->cryptoMode;
+    os.direction = pTestSession->direction;
+    os.operation = pTestSession->operation;
+
+    for(i=0; i<pTestSession->cryptoKeySize; i++)
+        os.cryptoKey[i] = pTestSession->pCryptoKey[i];
+
+    os.cryptoKeyLength = pTestSession->cryptoKeySize;
+
+    for(i=0; i<pTestSession->macKeySize; i++)
+        os.macKey[i] = pTestSession->pMacKey[i];
+
+    os.macKeyLength = pTestSession->macKeySize;
+    os.digestSize = digestSize;
+
+    sid = open_session(&os);
+    if(sid == -1)
+    {
+        mvOsPrintf("Can't open session for test %d: rc=0x%x\n",
+                    idx, cesaResult.retCode);
+        return cesaResult.retCode;
+    }
+    CESA_TEST_DEBUG_PRINT(("Opened session: sid = %d\n", sid));
+    pTestSession->sid = sid;
+    return MV_OK;
+}
+
+MV_STATUS   testClose(int idx)
+{
+    int                     testIdx;
+    MV_CESA_TEST_SESSION*   pTestSession;
+
+    pTestSession = getTestSessionDb(idx, &testIdx);
+    if(pTestSession == NULL)
+    {
+        mvOsPrintf("Test %d is not exist\n", idx);
+        return MV_BAD_PARAM;
+    }
+    pTestSession = &pTestSession[testIdx];
+
+    if(pTestSession->sid == -1)
+    {
+        mvOsPrintf("Test session %d is not opened\n", idx);
+        return MV_NO_SUCH;
+    }
+
+    close_session(pTestSession->sid);
+    pTestSession->sid = -1;
+
+    return MV_OK;
+}
+
+MV_STATUS testCmd(int sid, int iter, MV_CESA_COMMAND* pCmd,
+             MV_CESA_TEST_SESSION* pTestSession, MV_U8* pIV, int ivSize)
+{
+    int                 cmdReqId = 0;
+    int                 i;
+    MV_STATUS           rc = MV_OK;
+    char                ivZeroHex[] = "0000";
+
+    if(iter == 0)
+        iter = CESA_DEF_ITER_NUM;
+
+    if(pCmd == NULL)
+    {
+        mvOsPrintf("testCmd failed: pCmd=NULL\n");
+        return MV_BAD_PARAM;
+    }
+    pCmd->sessionId = sid;
+
+    cesaCryptoError = 0;
+    cesaReqIdError = 0;
+    cesaError = 0;
+    cesaTestIsrMissCount = 0;
+    cesaIsReady = MV_FALSE;
+    cesaIteration = iter;
+
+    if(cesaInputHexStr == NULL)
+        cesaInputHexStr = cesaPlainHexEbc;
+
+    for(i=0; i<CESA_DEF_REQ_SIZE; i++)
+    {
+        pCmd->pSrc = (MV_CESA_MBUF*)(cesaCmdRing[i].pSrc);
+        if(pIV != NULL)
+        {
+            /* If IV from SA - set IV in Source buffer to zeros */
+            cesaSetMbuf(pCmd->pSrc, ivZeroHex, 0, pCmd->cryptoOffset);
+            cesaSetMbuf(pCmd->pSrc, cesaInputHexStr, pCmd->cryptoOffset,
+                        (cesaReqSize - pCmd->cryptoOffset));
+        }
+        else
+        {
+            cesaSetMbuf(pCmd->pSrc, cesaInputHexStr, 0, cesaReqSize);
+        }
+        pCmd->pDst = (MV_CESA_MBUF*)(cesaCmdRing[i].pDst);
+        cesaSetMbuf(pCmd->pDst, cesaNullPlainHexText, 0, cesaReqSize);
+
+        memcpy(&cesaCmdRing[i], pCmd, sizeof(*pCmd));
+    }
+
+    if(cesaCheckMode == CESA_SW_SHOW_CHECK_MODE)
+    {
+        MV_U8   pDigest[MV_CESA_MAX_DIGEST_SIZE];
+
+        if(pTestSession->macAlgorithm == MV_CESA_MAC_MD5)
+        {
+            mvMD5(pCmd->pSrc->pFrags[0].bufVirtPtr, pCmd->macLength, pDigest);
+            mvOsPrintf("SW HASH_MD5: reqSize=%d, macLength=%d\n",
+                        cesaReqSize, pCmd->macLength);
+            mvDebugMemDump(pDigest, MV_CESA_MD5_DIGEST_SIZE, 1);
+            return MV_OK;
+        }
+        if(pTestSession->macAlgorithm == MV_CESA_MAC_SHA1)
+        {
+            mvSHA1(pCmd->pSrc->pFrags[0].bufVirtPtr, pCmd->macLength, pDigest);
+            mvOsPrintf("SW HASH_SHA1: reqSize=%d, macLength=%d\n",
+                        cesaReqSize, pCmd->macLength);
+            mvDebugMemDump(pDigest, MV_CESA_SHA1_DIGEST_SIZE, 1);
+            return MV_OK;
+        }
+    }
+
+    cesaBeginTicks = CESA_TEST_TICK_GET();
+    CESA_TEST_DEBUG_CODE( memset(cesaTestTrace, 0, sizeof(cesaTestTrace));
+                     cesaTestTraceIdx = 0;
+    );
+
+    if(cesaCheckMode == CESA_SW_NULL_CHECK_MODE)
+    {
+        volatile MV_U8   pDigest[MV_CESA_MAX_DIGEST_SIZE];
+
+        for(i=0; i<iter; i++)
+        {
+            if(pTestSession->macAlgorithm == MV_CESA_MAC_MD5)
+            {
+                mvMD5(pCmd->pSrc->pFrags[0].bufVirtPtr, pCmd->macLength, (unsigned char*)pDigest);
+            }
+            if(pTestSession->macAlgorithm == MV_CESA_MAC_SHA1)
+            {
+                mvSHA1(pCmd->pSrc->pFrags[0].bufVirtPtr, pCmd->macLength, (MV_U8 *)pDigest);
+            }
+        }
+        cesaEndTicks = CESA_TEST_TICK_GET();
+        cesaRate = getRate(&cesaRateAfterDot);
+        cesaIsReady = MV_TRUE;
+
+        return MV_OK;
+    }
+
+    /*cesaTestIsrCount = 0;*/
+    /*mvCesaDebugStatsClear();*/
+
+#ifndef MV_NETBSD
+    MV_REG_WRITE(MV_CESA_ISR_CAUSE_REG, 0);
+#endif
+
+    for(i=0; i<iter; i++)
+    {
+        unsigned long flags;
+
+        pCmd = &cesaCmdRing[cmdReqId];
+        pCmd->pReqPrv = (void*)cmdReqId;
+
+        CESA_TEST_LOCK(flags);
+
+        rc = mvCesaAction(pCmd);
+        if(rc == MV_NO_RESOURCE)
+            cesaTestFull = 1;
+
+        CESA_TEST_UNLOCK(flags);
+
+        if(rc == MV_NO_RESOURCE)
+        {
+            CESA_TEST_LOCK(flags);
+            CESA_TEST_WAIT( (cesaTestFull == 0), 100);
+            CESA_TEST_UNLOCK(flags);
+            if(cesaTestFull == 1)
+            {
+                mvOsPrintf("CESA Test timeout: i=%d, iter=%d, cesaTestFull=%d\n",
+                            i, iter, cesaTestFull);
+                cesaTestFull = 0;
+                return MV_TIMEOUT;
+            }
+
+            CESA_TEST_LOCK(flags);
+
+            rc = mvCesaAction(pCmd);
+
+            CESA_TEST_UNLOCK(flags);
+        }
+        if( (rc != MV_OK) && (rc != MV_NO_MORE) )
+        {
+            mvOsPrintf("mvCesaAction failed: rc=%d\n", rc);
+            return rc;
+        }
+
+        cmdReqId++;
+        if(cmdReqId >= CESA_DEF_REQ_SIZE)
+            cmdReqId = 0;
+
+#ifdef MV_LINUX
+        /* Reschedule each 16 requests */
+        if( (i & 0xF) == 0)
+            schedule();
+#endif
+    }
+    return MV_OK;
+}
+
+void    cesaTestStart(int bufNum, int bufSize)
+{
+    int             i, j, idx;
+    MV_CESA_MBUF    *pMbufSrc, *pMbufDst;
+    MV_BUF_INFO     *pFragsSrc, *pFragsDst;
+    char            *pBuf;
+#ifndef MV_NETBSD
+    int             numOfSessions, queueDepth;
+    char            *pSram;
+    MV_STATUS       status;
+    MV_CPU_DEC_WIN  addrDecWin;
+#endif
+
+    cesaCmdRing = mvOsMalloc(sizeof(MV_CESA_COMMAND) * CESA_DEF_REQ_SIZE);
+    if(cesaCmdRing == NULL)
+    {
+        mvOsPrintf("testStart: Can't allocate %ld bytes of memory\n",
+                sizeof(MV_CESA_COMMAND) * CESA_DEF_REQ_SIZE);
+        return;
+    }
+    memset(cesaCmdRing, 0, sizeof(MV_CESA_COMMAND) * CESA_DEF_REQ_SIZE);
+
+    if(bufNum == 0)
+        bufNum = CESA_DEF_BUF_NUM;
+
+    if(bufSize == 0)
+        bufSize = CESA_DEF_BUF_SIZE;
+
+    cesaBufNum = bufNum;
+    cesaBufSize = bufSize;
+    mvOsPrintf("CESA test started: bufNum = %d, bufSize = %d\n",
+                bufNum, bufSize);
+
+    cesaHexBuffer = mvOsMalloc(2*bufNum*bufSize);
+    if(cesaHexBuffer == NULL)
+    {
+        mvOsPrintf("testStart: Can't malloc %d bytes for cesaHexBuffer.\n",
+                    2*bufNum*bufSize);
+        return;
+    }
+    memset(cesaHexBuffer, 0, (2*bufNum*bufSize));
+
+    cesaBinBuffer = mvOsMalloc(bufNum*bufSize);
+    if(cesaBinBuffer == NULL)
+    {
+        mvOsPrintf("testStart: Can't malloc %d bytes for cesaBinBuffer\n",
+                    bufNum*bufSize);
+        return;
+    }
+    memset(cesaBinBuffer, 0, (bufNum*bufSize));
+
+    cesaExpBinBuffer = mvOsMalloc(bufNum*bufSize);
+    if(cesaExpBinBuffer == NULL)
+    {
+        mvOsPrintf("testStart: Can't malloc %d bytes for cesaExpBinBuffer\n",
+                    bufNum*bufSize);
+        return;
+    }
+    memset(cesaExpBinBuffer, 0, (bufNum*bufSize));
+
+    CESA_TEST_WAIT_INIT();
+
+    pMbufSrc = mvOsMalloc(sizeof(MV_CESA_MBUF) * CESA_DEF_REQ_SIZE);
+    pFragsSrc = mvOsMalloc(sizeof(MV_BUF_INFO) * bufNum * CESA_DEF_REQ_SIZE);
+
+    pMbufDst = mvOsMalloc(sizeof(MV_CESA_MBUF) * CESA_DEF_REQ_SIZE);
+    pFragsDst = mvOsMalloc(sizeof(MV_BUF_INFO) * bufNum * CESA_DEF_REQ_SIZE);
+
+    if( (pMbufSrc == NULL) || (pFragsSrc == NULL) ||
+        (pMbufDst == NULL) || (pFragsDst == NULL) )
+    {
+        mvOsPrintf("testStart: Can't malloc Src and Dst pMbuf and pFrags structures.\n");
+        /* !!!! Dima cesaTestCleanup();*/
+        return;
+    }
+
+    memset(pMbufSrc, 0, sizeof(MV_CESA_MBUF) * CESA_DEF_REQ_SIZE);
+    memset(pFragsSrc, 0, sizeof(MV_BUF_INFO) * bufNum * CESA_DEF_REQ_SIZE);
+
+    memset(pMbufDst, 0, sizeof(MV_CESA_MBUF) * CESA_DEF_REQ_SIZE);
+    memset(pFragsDst, 0, sizeof(MV_BUF_INFO) * bufNum * CESA_DEF_REQ_SIZE);
+
+    mvOsPrintf("Cesa Test Start: pMbufSrc=%p, pFragsSrc=%p, pMbufDst=%p, pFragsDst=%p\n",
+                pMbufSrc, pFragsSrc, pMbufDst, pFragsDst);
+
+    idx = 0;
+    for(i=0; i<CESA_DEF_REQ_SIZE; i++)
+    {
+        pBuf = mvOsIoCachedMalloc(cesaTestOSHandle,bufSize * bufNum * 2,
+				  &cesaReqBufs[i].bufPhysAddr,
+				  &cesaReqBufs[i].memHandle);
+		if(pBuf == NULL)
+    	{
+        	mvOsPrintf("testStart: Can't malloc %d bytes for pBuf\n",
+                    bufSize * bufNum * 2);
+        	return;
+    	}
+
+        memset(pBuf, 0, bufSize * bufNum * 2);
+        mvOsCacheFlush(cesaTestOSHandle,pBuf, bufSize * bufNum * 2);
+        if(pBuf == NULL)
+        {
+            mvOsPrintf("cesaTestStart: Can't allocate %d bytes for req_%d buffers\n",
+                        bufSize * bufNum * 2, i);
+            return;
+        }
+
+        cesaReqBufs[i].bufVirtPtr = (MV_U8*)pBuf;
+        cesaReqBufs[i].bufSize =  bufSize * bufNum * 2;
+
+        cesaCmdRing[i].pSrc = &pMbufSrc[i];
+        cesaCmdRing[i].pSrc->pFrags = &pFragsSrc[idx];
+        cesaCmdRing[i].pSrc->numFrags = bufNum;
+        cesaCmdRing[i].pSrc->mbufSize = 0;
+
+        cesaCmdRing[i].pDst = &pMbufDst[i];
+        cesaCmdRing[i].pDst->pFrags = &pFragsDst[idx];
+        cesaCmdRing[i].pDst->numFrags = bufNum;
+        cesaCmdRing[i].pDst->mbufSize = 0;
+
+        for(j=0; j<bufNum; j++)
+        {
+            cesaCmdRing[i].pSrc->pFrags[j].bufVirtPtr = (MV_U8*)pBuf;
+            cesaCmdRing[i].pSrc->pFrags[j].bufSize = bufSize;
+            pBuf += bufSize;
+            cesaCmdRing[i].pDst->pFrags[j].bufVirtPtr = (MV_U8*)pBuf;
+            cesaCmdRing[i].pDst->pFrags[j].bufSize = bufSize;
+            pBuf += bufSize;
+        }
+        idx += bufNum;
+    }
+
+#ifndef MV_NETBSD
+    if (mvCpuIfTargetWinGet(CRYPT_ENG, &addrDecWin) == MV_OK)
+        pSram = (char*)addrDecWin.addrWin.baseLow;
+    else
+    {
+        mvOsPrintf("mvCesaInit: ERR. mvCpuIfTargetWinGet failed\n");
+        return;
+    }
+
+#ifdef MV_CESA_NO_SRAM
+    pSram = mvOsMalloc(4*1024+8);
+    if(pSram == NULL)
+    {
+        mvOsPrintf("CesaTest: can't allocate %d bytes for SRAM simulation\n",
+                4*1024+8);
+        /* !!!! Dima cesaTestCleanup();*/
+        return;
+    }
+    pSram = (MV_U8*)MV_ALIGN_UP((MV_U32)pSram, 8);
+#endif /* MV_CESA_NO_SRAM */
+
+    numOfSessions = CESA_DEF_SESSION_NUM;
+    queueDepth = CESA_DEF_REQ_SIZE - MV_CESA_MAX_CHAN;
+
+    status = mvCesaInit(numOfSessions, queueDepth, pSram, NULL);
+    if(status != MV_OK)
+    {
+        mvOsPrintf("mvCesaInit is Failed: status = 0x%x\n", status);
+        /* !!!! Dima cesaTestCleanup();*/
+        return;
+    }
+#endif /* !MV_NETBSD */
+
+    /* Prepare data for tests */
+    for(i=0; i<50; i++)
+        strcat((char*)cesaDataHexStr3, "dd");
+
+    strcpy((char*)cesaDataAndMd5digest3,  cesaDataHexStr3);
+    strcpy((char*)cesaDataAndSha1digest3, cesaDataHexStr3);
+
+    /* Digest must be 8 byte aligned */
+    for(; i<56; i++)
+    {
+        strcat((char*)cesaDataAndMd5digest3, "00");
+        strcat((char*)cesaDataAndSha1digest3, "00");
+    }
+    strcat((char*)cesaDataAndMd5digest3,  cesaHmacMd5digestHex3);
+    strcat((char*)cesaDataAndSha1digest3, cesaHmacSha1digestHex3);
+
+#ifndef MV_NETBSD
+    MV_REG_WRITE( MV_CESA_ISR_CAUSE_REG, 0);
+    MV_REG_WRITE( MV_CESA_ISR_MASK_REG, MV_CESA_CAUSE_ACC_DMA_MASK);
+#endif
+
+#ifdef MV_VXWORKS
+    {
+        MV_STATUS       status;
+
+        status = intConnect((VOIDFUNCPTR *)INT_LVL_CESA, cesaTestReadyIsr, (int)NULL);
+        if (status != OK)
+        {
+            mvOsPrintf("CESA: Can't connect CESA (%d) interrupt, status=0x%x \n",
+                        INT_LVL_CESA, status);
+            /* !!!! Dima cesaTestCleanup();*/
+            return;
+        }
+        cesaSemId = semMCreate(SEM_Q_PRIORITY | SEM_INVERSION_SAFE | SEM_DELETE_SAFE);
+        if(cesaSemId == NULL)
+        {
+            mvOsPrintf("cesaTestStart: Can't create semaphore\n");
+            return;
+        }
+        intEnable(INT_LVL_CESA);
+    }
+#endif /* MV_VXWORKS */
+
+#if !defined(MV_NETBSD) && defined(__KERNEL__)
+        if( request_irq(CESA_IRQ, cesaTestReadyIsr, (SA_INTERRUPT) , "cesa_test", NULL ) ) 
+        {
+            mvOsPrintf( "cannot assign irq\n" );
+            /* !!!! Dima cesaTestCleanup();*/
+            return;
+        }
+        spin_lock_init( &cesaLock );
+#endif
+}
+
+MV_STATUS   testRun(int idx, int caseIdx, int iter,
+                    int reqSize, int checkMode)
+{
+    int                     testIdx, count, sid, digestSize;
+    int                     blockSize;
+    MV_CESA_TEST_SESSION*   pTestSession;
+    MV_CESA_COMMAND         cmd;
+    MV_STATUS               status;
+
+    memset(&cmd, 0, sizeof(cmd));
+
+    pTestSession = getTestSessionDb(idx, &testIdx);
+    if(pTestSession == NULL)
+    {
+        mvOsPrintf("Test %d is not exist\n", idx);
+        return MV_BAD_PARAM;
+    }
+    pTestSession = &pTestSession[testIdx];
+
+    sid = pTestSession->sid;
+    if(sid == -1)
+    {
+        mvOsPrintf("Test %d is not opened\n", idx);
+        return MV_BAD_STATE;
+    }
+    switch(pTestSession->cryptoAlgorithm)
+    {
+        case MV_CESA_CRYPTO_DES:
+        case MV_CESA_CRYPTO_3DES:
+            blockSize = MV_CESA_DES_BLOCK_SIZE;
+            break;
+
+        case MV_CESA_CRYPTO_AES:
+            blockSize = MV_CESA_AES_BLOCK_SIZE;
+            break;
+
+        case MV_CESA_CRYPTO_NULL:
+            blockSize = 0;
+            break;
+
+        default:
+            mvOsPrintf("cesaTestRun: Bad CryptoAlgorithm=%d\n",
+                pTestSession->cryptoAlgorithm);
+        return MV_BAD_PARAM;
+    }
+    switch(pTestSession->macAlgorithm)
+    {
+        case MV_CESA_MAC_MD5:
+        case MV_CESA_MAC_HMAC_MD5:
+            digestSize = MV_CESA_MD5_DIGEST_SIZE;
+            break;
+
+        case MV_CESA_MAC_SHA1:
+        case MV_CESA_MAC_HMAC_SHA1:
+            digestSize = MV_CESA_SHA1_DIGEST_SIZE;
+            break;
+        default:
+            digestSize = 0;
+    }
+
+    if(iter == 0)
+        iter = CESA_DEF_ITER_NUM;
+
+    if(pTestSession->direction == MV_CESA_DIR_ENCODE)
+    {
+        cesaOutputHexStr = cesaTestCases[caseIdx].cipherHexStr;
+        cesaInputHexStr = cesaTestCases[caseIdx].plainHexStr;
+    }
+    else
+    {
+        cesaOutputHexStr = cesaTestCases[caseIdx].plainHexStr;
+        cesaInputHexStr = cesaTestCases[caseIdx].cipherHexStr;
+    }
+
+    cmd.sessionId = sid;
+    if(checkMode == CESA_FAST_CHECK_MODE)
+    {
+        cmd.cryptoLength = cesaTestCases[caseIdx].cryptoLength;
+        cmd.macLength = cesaTestCases[caseIdx].macLength;
+    }
+    else
+    {
+        cmd.cryptoLength = reqSize;
+        cmd.macLength = reqSize;
+    }
+    cesaRateSize = cmd.cryptoLength;
+    cesaReqSize = cmd.cryptoLength;
+    cmd.cryptoOffset = 0;
+    if(pTestSession->operation != MV_CESA_MAC_ONLY)
+    {
+        if( (pTestSession->cryptoMode == MV_CESA_CRYPTO_CBC) ||
+            (pTestSession->cryptoMode == MV_CESA_CRYPTO_CTR) )
+        {
+            cmd.ivOffset = 0;
+            cmd.cryptoOffset = blockSize;
+            if(cesaTestCases[caseIdx].pCryptoIV == NULL)
+            {
+                cmd.ivFromUser = 1;
+            }
+            else
+            {
+                cmd.ivFromUser = 0;
+                mvCesaCryptoIvSet(cesaTestCases[caseIdx].pCryptoIV, blockSize);
+            }
+            cesaReqSize = cmd.cryptoOffset + cmd.cryptoLength;
+        }
+    }
+
+/*
+    mvOsPrintf("ivFromUser=%d, cryptoLength=%d, cesaReqSize=%d, cryptoOffset=%d\n",
+                cmd.ivFromUser, cmd.cryptoLength, cesaReqSize, cmd.cryptoOffset);
+*/
+    if(pTestSession->operation != MV_CESA_CRYPTO_ONLY)
+    {
+        cmd.macOffset = cmd.cryptoOffset;
+
+        if(cesaTestCases[caseIdx].digestOffset == -1)
+        {
+            cmd.digestOffset = cmd.macOffset + cmd.macLength;
+            cmd.digestOffset = MV_ALIGN_UP(cmd.digestOffset, 8);
+        }
+        else
+        {
+            cmd.digestOffset = cesaTestCases[caseIdx].digestOffset;
+        }
+        if( (cmd.digestOffset + digestSize) > cesaReqSize)
+            cesaReqSize = cmd.digestOffset + digestSize;
+    }
+
+    cesaCheckMode = checkMode;
+
+    if(checkMode == CESA_NULL_CHECK_MODE)
+    {
+        cesaCheckSize = 0;
+        cesaCheckOffset = 0;
+    }
+    else
+    {
+        if(pTestSession->operation == MV_CESA_CRYPTO_ONLY)
+        {
+            cesaCheckOffset = 0;
+            cesaCheckSize = cmd.cryptoLength;
+        }
+        else
+        {
+            cesaCheckSize = digestSize;
+            cesaCheckOffset = cmd.digestOffset;
+        }
+    }
+/*
+    mvOsPrintf("reqSize=%d, checkSize=%d, checkOffset=%d, checkMode=%d\n",
+                cesaReqSize, cesaCheckSize, cesaCheckOffset, cesaCheckMode);
+
+    mvOsPrintf("blockSize=%d, ivOffset=%d, ivFromUser=%d, crOffset=%d, crLength=%d\n",
+                blockSize, cmd.ivOffset, cmd.ivFromUser,
+                cmd.cryptoOffset, cmd.cryptoLength);
+
+    mvOsPrintf("macOffset=%d, digestOffset=%d, macLength=%d\n",
+                cmd.macOffset, cmd.digestOffset, cmd.macLength);
+*/
+    status = testCmd(sid, iter, &cmd, pTestSession,
+                     cesaTestCases[caseIdx].pCryptoIV, blockSize);
+
+    if(status != MV_OK)
+        return status;
+
+    /* Wait when all callbacks is received */
+    count = 0;
+    while(cesaIsReady == MV_FALSE)
+    {
+        mvOsSleep(10);
+        count++;
+        if(count > 100)
+        {
+            mvOsPrintf("testRun: Timeout occured\n");
+            return MV_TIMEOUT;
+        }
+    }
+
+    return MV_OK;
+}
+
+
+void cesaTestStop(void)
+{
+    MV_CESA_MBUF    *pMbufSrc, *pMbufDst;
+    MV_BUF_INFO     *pFragsSrc, *pFragsDst;
+    int             i;
+
+    /* Release all allocated memories */
+    pMbufSrc = (MV_CESA_MBUF*)(cesaCmdRing[0].pSrc);
+    pFragsSrc = cesaCmdRing[0].pSrc->pFrags;
+
+    pMbufDst = (MV_CESA_MBUF*)(cesaCmdRing[0].pDst);
+    pFragsDst = cesaCmdRing[0].pDst->pFrags;
+
+    mvOsFree(pMbufSrc);
+    mvOsFree(pMbufDst);
+    mvOsFree(pFragsSrc);
+    mvOsFree(pFragsDst);
+
+    for(i=0; i<CESA_DEF_REQ_SIZE; i++)
+    {
+        mvOsIoCachedFree(cesaTestOSHandle,cesaReqBufs[i].bufSize,
+			 cesaReqBufs[i].bufPhysAddr,cesaReqBufs[i].bufVirtPtr,
+			 cesaReqBufs[i].memHandle);
+    }
+    cesaDataHexStr3[0] = '\0';
+}
+
+void    desTest(int iter, int reqSize, int checkMode)
+{
+    int         mode, i;
+    MV_STATUS   status;
+
+    mode = checkMode;
+    if(checkMode == CESA_FULL_CHECK_MODE)
+        mode = CESA_FAST_CHECK_MODE;
+    i = iter;
+    if(mode != CESA_NULL_CHECK_MODE)
+        i = 1;
+
+    testOpen(0);
+    testOpen(1);
+    testOpen(2);
+    testOpen(3);
+
+/* DES / ECB mode / Encrypt only */
+    status = testRun(0, 1, iter, reqSize, checkMode);
+    printTestResults(0, status, checkMode);
+
+/* DES / ECB mode / Decrypt only */
+    status = testRun(1, 1, iter, reqSize, checkMode);
+    printTestResults(1, status, checkMode);
+
+/* DES / CBC mode / Encrypt only */
+    status = testRun(2, 2, i, reqSize, mode);
+    printTestResults(2, status, mode);
+
+/* DES / CBC mode / Decrypt only */
+    status = testRun(3, 2, iter, reqSize, mode);
+    printTestResults(3, status, mode);
+
+    testClose(0);
+    testClose(1);
+    testClose(2);
+    testClose(3);
+}
+
+void    tripleDesTest(int iter, int reqSize, int checkMode)
+{
+    int         mode, i;
+    MV_STATUS   status;
+
+    mode = checkMode;
+    if(checkMode == CESA_FULL_CHECK_MODE)
+        mode = CESA_FAST_CHECK_MODE;
+    i = iter;
+    if(mode != CESA_NULL_CHECK_MODE)
+        i = 1;
+
+    testOpen(100);
+    testOpen(101);
+    testOpen(102);
+    testOpen(103);
+
+/* 3DES / ECB mode / Encrypt only */
+    status = testRun(100, 1, iter, reqSize, checkMode);
+    printTestResults(100, status, checkMode);
+
+/* 3DES / ECB mode / Decrypt only */
+    status = testRun(101, 1, iter, reqSize, checkMode);
+    printTestResults(101, status, checkMode);
+
+/* 3DES / CBC mode / Encrypt only */
+    status = testRun(102, 2, i, reqSize, mode);
+    printTestResults(102, status, mode);
+
+/* 3DES / CBC mode / Decrypt only */
+    status = testRun(103, 2, iter, reqSize, mode);
+    printTestResults(103, status, mode);
+
+    testClose(100);
+    testClose(101);
+    testClose(102);
+    testClose(103);
+}
+
+void    aesTest(int iter, int reqSize, int checkMode)
+{
+    MV_STATUS   status;
+    int         mode, i;
+
+    mode = checkMode;
+    if(checkMode == CESA_FULL_CHECK_MODE)
+        mode = CESA_FAST_CHECK_MODE;
+
+    i = iter;
+    if(mode != CESA_NULL_CHECK_MODE)
+        i = 1;
+
+    testOpen(200);
+    testOpen(201);
+    testOpen(202);
+    testOpen(203);
+    testOpen(204);
+    testOpen(205);
+    testOpen(206);
+    testOpen(207);
+    testOpen(208);
+
+/* AES-128 Encode ECB mode */
+    status = testRun(200, 3, iter, reqSize, checkMode);
+    printTestResults(200, status, checkMode);
+
+/* AES-128 Decode ECB mode */
+    status = testRun(201, 3, iter, reqSize, checkMode);
+    printTestResults(201, status, checkMode);
+
+/* AES-128 Encode CBC mode (IV from SA) */
+    status = testRun(202, 10, i, reqSize, mode);
+    printTestResults(202, status, mode);
+
+/* AES-128 Encode CBC mode (IV from User) */
+    status = testRun(202, 24, i, reqSize, mode);
+    printTestResults(202, status, mode);
+
+/* AES-128 Decode CBC mode */
+    status = testRun(203, 24, iter, reqSize, mode);
+    printTestResults(203, status, checkMode);
+
+/* AES-192 Encode ECB mode */
+    status = testRun(204, 4, iter, reqSize, checkMode);
+    printTestResults(204, status, checkMode);
+
+/* AES-192 Decode ECB mode */
+    status = testRun(205, 4, iter, reqSize, checkMode);
+    printTestResults(205, status, checkMode);
+
+/* AES-256 Encode ECB mode */
+    status = testRun(206, 5, iter, reqSize, checkMode);
+    printTestResults(206, status, checkMode);
+
+/* AES-256 Decode ECB mode */
+    status = testRun(207, 5, iter, reqSize, checkMode);
+    printTestResults(207, status, checkMode);
+
+#if defined(MV_LINUX)
+/* AES-128 Encode CTR mode */
+    status = testRun(208, 23, iter, reqSize, mode);
+    printTestResults(208, status, checkMode);
+#endif
+    testClose(200);
+    testClose(201);
+    testClose(202);
+    testClose(203);
+    testClose(204);
+    testClose(205);
+    testClose(206);
+    testClose(207);
+    testClose(208);
+}
+
+
+void    mdTest(int iter, int reqSize, int checkMode)
+{
+    int         mode;
+    MV_STATUS   status;
+
+    if(iter == 0)
+        iter = CESA_DEF_ITER_NUM;
+
+    mode = checkMode;
+    if(checkMode == CESA_FULL_CHECK_MODE)
+        mode = CESA_FAST_CHECK_MODE;
+
+    testOpen(300);
+    testOpen(301);
+    testOpen(302);
+    testOpen(303);
+    testOpen(305);
+
+/* HMAC-MD5 Generate signature test */
+    status = testRun(300, 6, iter, reqSize, mode);
+    printTestResults(300, status, checkMode);
+
+/* HMAC-MD5 Verify Signature test */
+    status = testRun(301, 7, iter, reqSize, mode);
+    printTestResults(301, status, checkMode);
+
+/* HMAC-MD5 Generate signature test */
+    status = testRun(302, 8, iter, reqSize, mode);
+    printTestResults(302, status, checkMode);
+
+/* HMAC-MD5 Verify Signature test */
+    status = testRun(303, 9, iter, reqSize, mode);
+    printTestResults(303, status, checkMode);
+
+/* HASH-MD5 Generate signature test */
+    status = testRun(305, 15, iter, reqSize, mode);
+    printTestResults(305, status, checkMode);
+
+    testClose(300);
+    testClose(301);
+    testClose(302);
+    testClose(303);
+    testClose(305);
+}
+
+void    shaTest(int iter, int reqSize, int checkMode)
+{
+    int         mode;
+    MV_STATUS   status;
+
+    if(iter == 0)
+        iter = CESA_DEF_ITER_NUM;
+
+    mode = checkMode;
+    if(checkMode == CESA_FULL_CHECK_MODE)
+        mode = CESA_FAST_CHECK_MODE;
+
+    testOpen(400);
+    testOpen(401);
+    testOpen(402);
+    testOpen(403);
+    testOpen(405);
+
+/* HMAC-SHA1 Generate signature test */
+    status = testRun(400, 11, iter, reqSize, mode);
+    printTestResults(400, status, checkMode);
+
+/* HMAC-SHA1 Verify Signature test */
+    status = testRun(401, 12, iter, reqSize, mode);
+    printTestResults(401, status, checkMode);
+
+/* HMAC-SHA1 Generate signature test */
+    status = testRun(402, 13, iter, reqSize, mode);
+    printTestResults(402, status, checkMode);
+
+/* HMAC-SHA1 Verify Signature test */
+    status = testRun(403, 14, iter, reqSize, mode);
+    printTestResults(403, status, checkMode);
+
+/* HMAC-SHA1 Generate signature test */
+    status = testRun(405, 16, iter, reqSize, mode);
+    printTestResults(405, status, checkMode);
+
+    testClose(400);
+    testClose(401);
+    testClose(402);
+    testClose(403);
+    testClose(405);
+}
+
+void    combiTest(int iter, int reqSize, int checkMode)
+{
+    MV_STATUS   status;
+    int         mode, i;
+
+    mode = checkMode;
+    if(checkMode == CESA_FULL_CHECK_MODE)
+        mode = CESA_FAST_CHECK_MODE;
+
+    if(iter == 0)
+        iter = CESA_DEF_ITER_NUM;
+
+    i = iter;
+    if(mode != CESA_NULL_CHECK_MODE)
+        i = 1;
+
+    testOpen(500);
+    testOpen(501);
+    testOpen(502);
+    testOpen(503);
+    testOpen(504);
+    testOpen(505);
+    testOpen(506);
+    testOpen(507);
+
+/* DES ECB + MD5 encode test */
+    status = testRun(500, 17, iter, reqSize, mode);
+    printTestResults(500, status, mode);
+
+/* DES ECB + SHA1 encode test */
+    status = testRun(501, 18, iter, reqSize, mode);
+    printTestResults(501, status, mode);
+
+/* 3DES ECB + MD5 encode test */
+    status = testRun(502, 17, iter, reqSize, mode);
+    printTestResults(502, status, mode);
+
+/* 3DES ECB + SHA1 encode test */
+    status = testRun(503, 18, iter, reqSize, mode);
+    printTestResults(503, status, mode);
+
+/* 3DES CBC + MD5 encode test */
+    status = testRun(504, 19, i, reqSize, mode);
+    printTestResults(504, status, mode);
+
+/* 3DES CBC + SHA1 encode test */
+    status = testRun(505, 20, i, reqSize, mode);
+    printTestResults(505, status, mode);
+
+/* AES-128 CBC + MD5 encode test */
+    status = testRun(506, 21, i, reqSize, mode);
+    printTestResults(506, status, mode);
+
+/* AES-128 CBC + SHA1 encode test */
+    status = testRun(507, 22, i, reqSize, mode);
+    printTestResults(507, status, mode);
+
+    testClose(500);
+    testClose(501);
+    testClose(502);
+    testClose(503);
+    testClose(504);
+    testClose(505);
+    testClose(506);
+    testClose(507);
+}
+
+void    cesaOneTest(int testIdx, int caseIdx,
+                    int iter, int reqSize, int checkMode)
+{
+    MV_STATUS   status;
+
+    if(iter == 0)
+        iter = CESA_DEF_ITER_NUM;
+
+    mvOsPrintf("test=%d, case=%d, size=%d, iter=%d\n",
+                testIdx, caseIdx, reqSize, iter);
+
+    status = testOpen(testIdx);
+
+    status = testRun(testIdx, caseIdx, iter, reqSize, checkMode);
+    printTestResults(testIdx, status, checkMode);
+    status = testClose(testIdx);
+
+}
+
+void    cesaTest(int iter, int reqSize, int checkMode)
+{
+    if(iter == 0)
+        iter = CESA_DEF_ITER_NUM;
+
+    mvOsPrintf("%d iteration\n", iter);
+    mvOsPrintf("%d size\n\n", reqSize);
+
+/* DES tests */
+    desTest(iter, reqSize, checkMode);
+
+/* 3DES tests */
+    tripleDesTest(iter, reqSize, checkMode);
+
+/* AES tests */
+    aesTest(iter, reqSize, checkMode);
+
+/* MD5 tests */
+    mdTest(iter, reqSize, checkMode);
+
+/* SHA-1 tests */
+    shaTest(iter, reqSize, checkMode);
+}
+
+void    multiSizeTest(int idx, int iter, int checkMode, char* inputData)
+{
+    MV_STATUS               status;
+    int                     i;
+    MV_CESA_SIZE_TEST*      pMultiTest;
+
+    if( testOpen(idx) != MV_OK)
+        return;
+
+    if(iter == 0)
+        iter = CESA_DEF_ITER_NUM;
+
+    if(checkMode == CESA_SHOW_CHECK_MODE)
+    {
+        iter = 1;
+    }
+    else
+        checkMode = CESA_FULL_CHECK_MODE;
+
+    cesaTestCases[0].plainHexStr = inputData;
+    cesaTestCases[0].pCryptoIV = NULL;
+
+    switch(idx)
+    {
+        case 302:
+            pMultiTest = mdMultiSizeTest302;
+            if(inputData == NULL)
+                cesaTestCases[0].plainHexStr = cesaDataHexStr3;
+            break;
+
+        case 304:
+            pMultiTest = mdMultiSizeTest304;
+            if(inputData == NULL)
+                cesaTestCases[0].plainHexStr = hashHexStr80;
+            break;
+
+        case 305:
+            pMultiTest = mdMultiSizeTest305;
+            if(inputData == NULL)
+                cesaTestCases[0].plainHexStr = hashHexStr80;
+            break;
+
+        case 402:
+            pMultiTest = shaMultiSizeTest402;
+            if(inputData == NULL)
+                cesaTestCases[0].plainHexStr = hashHexStr80;
+            break;
+
+        case 404:
+            pMultiTest = shaMultiSizeTest404;
+            if(inputData == NULL)
+                cesaTestCases[0].plainHexStr = hashHexStr80;
+            break;
+
+        case 405:
+            pMultiTest = shaMultiSizeTest405;
+            if(inputData == NULL)
+                cesaTestCases[0].plainHexStr = hashHexStr80;
+            break;
+
+        case 502:
+            pMultiTest = tripleDesMdMultiSizeTest502;
+            if(inputData == NULL)
+                cesaTestCases[0].plainHexStr = hashHexStr80;
+            break;
+
+        case 503:
+            pMultiTest = tripleDesShaMultiSizeTest503;
+            if(inputData == NULL)
+                cesaTestCases[0].plainHexStr = hashHexStr80;
+            break;
+
+        case 504:
+            iter = 1;
+            pMultiTest = cbc3desMdMultiSizeTest504;
+            cesaTestCases[0].pCryptoIV = iv1;
+            if(inputData == NULL)
+                cesaTestCases[0].plainHexStr = hashHexStr80;
+            break;
+
+        case 505:
+            iter = 1;
+            pMultiTest = cbc3desShaMultiSizeTest505;
+            cesaTestCases[0].pCryptoIV = iv1;
+            if(inputData == NULL)
+                cesaTestCases[0].plainHexStr = hashHexStr80;
+            break;
+
+        case 506:
+            iter = 1;
+            pMultiTest = cbcAes128md5multiSizeTest506;
+            cesaTestCases[0].pCryptoIV = iv5;
+            if(inputData == NULL)
+                cesaTestCases[0].plainHexStr = hashHexStr80;
+            break;
+
+        case 507:
+            iter = 1;
+            pMultiTest = cbcAes128sha1multiSizeTest507;
+            cesaTestCases[0].pCryptoIV = iv5;
+            if(inputData == NULL)
+                cesaTestCases[0].plainHexStr = hashHexStr80;
+            break;
+
+        default:
+            iter = 1;
+            checkMode = CESA_SHOW_CHECK_MODE;
+            pMultiTest = mdMultiSizeTest302;
+            if(inputData == NULL)
+                cesaTestCases[0].plainHexStr = hashHexStr80;
+    }
+    i = 0;
+    while(pMultiTest[i].outputHexStr != NULL)
+    {
+        cesaTestCases[0].cipherHexStr = (char *)pMultiTest[i].outputHexStr;
+        status = testRun(idx, 0, iter, pMultiTest[i].size,
+                         checkMode);
+        if(checkMode != CESA_SHOW_CHECK_MODE)
+        {
+            cesaReqSize = pMultiTest[i].size;
+            printTestResults(idx, status, checkMode);
+        }
+        if(status != MV_OK)
+            break;
+        i++;
+    }
+    testClose(idx);
+/*
+    mvCesaDebugStatus();
+    cesaTestPrintStatus();
+*/
+}
+
+void    open_session_test(int idx, int caseIdx, int iter)
+{
+    int         reqIdError, cryptoError, openErrors, i;
+    int         openErrDisp[100];
+    MV_STATUS   status;
+
+    memset(openErrDisp, 0, sizeof(openErrDisp));
+    openErrors = 0;
+    reqIdError = 0;
+    cryptoError = 0;
+    for(i=0; i<iter; i++)
+    {
+        status = testOpen(idx);
+        if(status != MV_OK)
+        {
+            openErrors++;
+            openErrDisp[status]++;
+        }
+        else
+        {
+            testRun(idx, caseIdx, 1, 0, CESA_FAST_CHECK_MODE);
+            if(cesaCryptoError > 0)
+                cryptoError++;
+            if(cesaReqIdError > 0)
+                reqIdError++;
+
+            testClose(idx);
+        }
+    }
+    if(cryptoError > 0)
+        mvOsPrintf("cryptoError : %d\n", cryptoError);
+    if(reqIdError > 0)
+        mvOsPrintf("reqIdError  : %d\n", reqIdError);
+
+    if(openErrors > 0)
+    {
+        mvOsPrintf("Open Errors = %d\n", openErrors);
+        for(i=0; i<100; i++)
+        {
+            if(openErrDisp[i] != 0)
+                mvOsPrintf("Error %d - occurs %d times\n", i, openErrDisp[i]);
+        }
+    }
+}
+
+
+void    loopback_test(int idx, int iter, int size, char* pPlainData)
+{
+}
+
+
+#if defined(MV_VXWORKS)
+int testMode = 0;
+unsigned __TASKCONV cesaTask(void* args)
+{
+    int reqSize = cesaReqSize;
+
+    if(testMode == 0)
+    {
+        cesaOneTest(cesaTestIdx, cesaCaseIdx, cesaIteration,
+                    reqSize, cesaCheckMode);
+    }
+    else
+    {
+        if(testMode == 1)
+        {
+            cesaTest(cesaIteration, reqSize, cesaCheckMode);
+            combiTest(cesaIteration, reqSize, cesaCheckMode);
+        }
+        else
+        {
+            multiSizeTest(cesaIdx, cesaIteration, cesaCheckMode, NULL);
+        }
+    }
+    return 0;
+}
+
+void oneTest(int testIdx, int caseIdx,
+              int iter, int reqSize, int checkMode)
+{
+    long    rc;
+
+    cesaIteration = iter;
+    cesaReqSize = cesaRateSize = reqSize;
+    cesaCheckMode = checkMode;
+    testMode = 0;
+    cesaTestIdx = testIdx;
+    cesaCaseIdx = caseIdx;
+    rc = mvOsTaskCreate("CESA_T", 100, 4*1024, cesaTask, NULL, &cesaTaskId);
+    if (rc != MV_OK)
+    {
+        mvOsPrintf("hMW: Can't create CESA multiCmd test task, rc = %ld\n", rc);
+    }
+}
+
+void multiTest(int iter, int reqSize, int checkMode)
+{
+    long    rc;
+
+    cesaIteration = iter;
+    cesaCheckMode = checkMode;
+    cesaReqSize = reqSize;
+    testMode = 1;
+    rc = mvOsTaskCreate("CESA_T", 100, 4*1024, cesaTask, NULL, &cesaTaskId);
+    if (rc != MV_OK)
+    {
+        mvOsPrintf("hMW: Can't create CESA multiCmd test task, rc = %ld\n", rc);
+    }
+}
+
+void sizeTest(int testIdx, int iter, int checkMode)
+{
+    long    rc;
+
+    cesaIteration = iter;
+        cesaCheckMode = checkMode;
+        testMode = 2;
+        cesaIdx = testIdx;
+    rc = mvOsTaskCreate("CESA_T", 100, 4*1024, cesaTask, NULL, &cesaTaskId);
+    if (rc != MV_OK)
+    {
+        mvOsPrintf("hMW: Can't create CESA test task, rc = %ld\n", rc);
+    }
+}
+
+#endif /* MV_VXWORKS */
+
+extern void    mvCesaDebugSA(short sid, int mode);
+void    cesaTestPrintSession(int idx)
+{
+    int                     testIdx;
+    MV_CESA_TEST_SESSION*   pTestSession;
+
+    pTestSession = getTestSessionDb(idx, &testIdx);
+    if(pTestSession == NULL)
+    {
+        mvOsPrintf("Test %d is not exist\n", idx);
+        return;
+    }
+    pTestSession = &pTestSession[testIdx];
+
+    if(pTestSession->sid == -1)
+    {
+        mvOsPrintf("Test session %d is not opened\n", idx);
+        return;
+    }
+
+    mvCesaDebugSA(pTestSession->sid, 1);
+}
+
+void    cesaTestPrintStatus(void)
+{
+    mvOsPrintf("\n\t Cesa Test Status\n\n");
+
+    mvOsPrintf("isrCount=%d\n",
+                cesaTestIsrCount);
+
+#ifdef CESA_TEST_DEBUG
+    {
+        int i, j;
+        j = cesaTestTraceIdx;
+        mvOsPrintf("No  Type  Cause   rCause   iCause   Res     Time     pReady    pProc    pEmpty\n");
+        for(i=0; i<MV_CESA_TEST_TRACE_SIZE; i++)
+        {
+            mvOsPrintf("%02d.  %d   0x%04x  0x%04x   0x%04x   0x%02x   0x%02x   %02d   0x%06x  %p  %p  %p\n",
+                j, cesaTestTrace[j].type, cesaTestTrace[j].cause, cesaTestTrace[j].realCause,
+                cesaTestTrace[j].dmaCause, cesaTestTrace[j].resources, cesaTestTrace[j].timeStamp,
+                cesaTestTrace[j].pReqReady, cesaTestTrace[j].pReqProcess, cesaTestTrace[j].pReqEmpty);
+            j++;
+            if(j == MV_CESA_TEST_TRACE_SIZE)
+                j = 0;
+        }
+    }
+#endif /* CESA_TEST_DEBUG */
+}
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvLru.c b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvLru.c
new file mode 100644
index 0000000000..9ab29a883a
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvLru.c
@@ -0,0 +1,158 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "mvOs.h"
+#include "mvLru.h"
+/* LRU Cache support */
+
+
+/* Init LRU cache database */
+MV_LRU_CACHE*   mvLruCacheInit(int numOfEntries)
+{
+    int             i;
+    MV_LRU_CACHE*   pLruCache;
+
+    pLruCache = mvOsMalloc(sizeof(MV_LRU_CACHE));
+    if(pLruCache == NULL)
+    {
+        return NULL;
+    }
+    memset(pLruCache, 0, sizeof(MV_LRU_CACHE));
+
+    pLruCache->table = mvOsMalloc(numOfEntries*sizeof(MV_LRU_ENTRY));
+    if(pLruCache->table == NULL)
+    {
+        mvOsFree(pLruCache);
+        return NULL;
+    }
+    memset(pLruCache->table, 0, numOfEntries*sizeof(MV_LRU_ENTRY));
+    pLruCache->tableSize = numOfEntries;
+
+    for(i=0; i<numOfEntries; i++)
+    {
+        pLruCache->table[i].next = i+1;
+        pLruCache->table[i].prev = i-1;         
+    }
+    pLruCache->least = 0;
+    pLruCache->most = numOfEntries-1;   
+
+    return pLruCache;
+}
+
+void    mvLruCacheFinish(MV_LRU_CACHE* pLruCache)
+{
+    mvOsFree(pLruCache->table);
+    mvOsFree(pLruCache);
+}
+
+/* Update LRU cache database after using cache Index */
+void    mvLruCacheIdxUpdate(MV_LRU_CACHE* pLruHndl, int cacheIdx)
+{
+    int prev, next;
+
+    if(cacheIdx == pLruHndl->most)
+        return;
+
+    next = pLruHndl->table[cacheIdx].next;
+    if(cacheIdx == pLruHndl->least)
+    {
+        pLruHndl->least = next;
+    }
+    else
+    {
+        prev = pLruHndl->table[cacheIdx].prev;
+
+        pLruHndl->table[next].prev = prev;
+        pLruHndl->table[prev].next = next;
+    }
+
+    pLruHndl->table[pLruHndl->most].next = cacheIdx;
+    pLruHndl->table[cacheIdx].prev = pLruHndl->most;
+    pLruHndl->most = cacheIdx;
+}
+
+/* Delete LRU cache entry */
+void    mvLruCacheIdxDelete(MV_LRU_CACHE* pLruHndl, int cacheIdx)
+{
+    int prev, next;
+
+    if(cacheIdx == pLruHndl->least)
+        return;
+
+    prev = pLruHndl->table[cacheIdx].prev;
+    if(cacheIdx == pLruHndl->most)
+    {
+        pLruHndl->most = prev;
+    }
+    else
+    {
+        next = pLruHndl->table[cacheIdx].next;
+
+        pLruHndl->table[next].prev = prev;
+        pLruHndl->table[prev].next = next;
+    }
+    pLruHndl->table[pLruHndl->least].prev = cacheIdx;
+    pLruHndl->table[cacheIdx].next = pLruHndl->least;
+    pLruHndl->least = cacheIdx;
+}
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvLru.h b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvLru.h
new file mode 100644
index 0000000000..896e7f81c1
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvLru.h
@@ -0,0 +1,112 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+/*******************************************************************************
+* mvLru.h - Header File for Least Recently Used Cache algorithm
+*
+* DESCRIPTION:
+*       This header file contains macros typedefs and function declaration for
+*       the Least Recently Used Cache algorithm.
+*
+*******************************************************************************/
+
+#ifndef __mvLru_h__
+#define __mvLru_h__
+
+
+typedef struct
+{
+    int next;
+    int prev;
+} MV_LRU_ENTRY;
+
+typedef struct
+{
+    int             least;
+    int             most;
+    MV_LRU_ENTRY*   table;
+    int             tableSize;
+
+}MV_LRU_CACHE;
+
+
+/* Find Cache index for replacement LRU */
+static INLINE int     mvLruCacheIdxFind(MV_LRU_CACHE* pLruHndl)
+{
+    return pLruHndl->least;
+}
+
+/* Init LRU cache module */
+MV_LRU_CACHE*   mvLruCacheInit(int numOfEntries);
+
+/* Finish LRU cache module */
+void    mvLruCacheFinish(MV_LRU_CACHE* pLruHndl);
+
+/* Update LRU cache database after using cache Index */
+void    mvLruCacheIdxUpdate(MV_LRU_CACHE* pLruHndl, int cacheIdx);
+
+/* Delete LRU cache entry */
+void    mvLruCacheIdxDelete(MV_LRU_CACHE* pLruHndl, int cacheIdx);
+
+
+#endif /* __mvLru_h__ */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvMD5.c b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvMD5.c
new file mode 100644
index 0000000000..189f6292ef
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvMD5.c
@@ -0,0 +1,349 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "mvOs.h"
+#include "mvMD5.h"
+
+static void mvMD5Transform(MV_U32 buf[4], MV_U32 const in[MV_MD5_MAC_LEN]);
+ 
+#ifdef  MV_CPU_LE
+#define mvByteReverse(buf, len)   /* Nothing */
+#else
+static void mvByteReverse(unsigned char *buf, unsigned longs);
+
+/*
+ * Note: this code is harmless on little-endian machines.
+ */
+static void mvByteReverse(unsigned char *buf, unsigned longs)
+{
+    MV_U32 t;
+
+    do 
+    {
+        t = (MV_U32) ((unsigned) buf[3] << 8 | buf[2]) << 16 |
+                      ((unsigned) buf[1] << 8 | buf[0]);
+        *(MV_U32 *) buf = t;
+        buf += 4;
+    } while (--longs);
+}
+#endif
+
+/*
+ * Start MD5 accumulation.  Set bit count to 0 and buffer to mysterious
+ * initialization constants.
+ */
+void    mvMD5Init(MV_MD5_CONTEXT *ctx)
+{
+    ctx->buf[0] = 0x67452301;
+    ctx->buf[1] = 0xefcdab89;
+    ctx->buf[2] = 0x98badcfe;
+    ctx->buf[3] = 0x10325476;
+
+    ctx->bits[0] = 0;
+    ctx->bits[1] = 0;
+}
+
+/*
+ * Update context to reflect the concatenation of another buffer full
+ * of bytes.
+ */
+void    mvMD5Update(MV_MD5_CONTEXT *ctx, unsigned char const *buf, unsigned len)
+{
+    MV_U32 t;
+
+    /* Update bitcount */
+
+    t = ctx->bits[0];
+    if ((ctx->bits[0] = t + ((MV_U32) len << 3)) < t)
+        ctx->bits[1]++;         /* Carry from low to high */
+    ctx->bits[1] += len >> 29;
+
+    t = (t >> 3) & 0x3f;        /* Bytes already in shsInfo->data */
+
+    /* Handle any leading odd-sized chunks */
+
+    if (t) 
+    {
+        unsigned char *p = (unsigned char *) ctx->in + t;
+
+        t = 64 - t;
+        if (len < t) 
+        {
+            memcpy(p, buf, len);
+            return;
+        }
+        memcpy(p, buf, t);
+        mvByteReverse(ctx->in, MV_MD5_MAC_LEN);
+        mvMD5Transform(ctx->buf, (MV_U32 *) ctx->in);
+        buf += t;
+        len -= t;
+    }
+    /* Process data in 64-byte chunks */
+
+    while (len >= 64) 
+    {
+        memcpy(ctx->in, buf, 64);
+        mvByteReverse(ctx->in, MV_MD5_MAC_LEN);
+        mvMD5Transform(ctx->buf, (MV_U32 *) ctx->in);
+        buf += 64;
+        len -= 64;
+    }
+
+    /* Handle any remaining bytes of data. */
+
+    memcpy(ctx->in, buf, len);
+}
+
+/*
+ * Final wrapup - pad to 64-byte boundary with the bit pattern
+ * 1 0* (64-bit count of bits processed, MSB-first)
+ */
+void    mvMD5Final(unsigned char digest[MV_MD5_MAC_LEN], MV_MD5_CONTEXT *ctx)
+{
+    unsigned count;
+    unsigned char *p;
+
+    /* Compute number of bytes mod 64 */
+    count = (ctx->bits[0] >> 3) & 0x3F;
+
+    /* Set the first char of padding to 0x80.  This is safe since there is
+       always at least one byte free */
+    p = ctx->in + count;
+    *p++ = 0x80;
+
+    /* Bytes of padding needed to make 64 bytes */
+    count = 64 - 1 - count;
+
+    /* Pad out to 56 mod 64 */
+    if (count < 8) 
+    {
+        /* Two lots of padding:  Pad the first block to 64 bytes */
+        memset(p, 0, count);
+        mvByteReverse(ctx->in, MV_MD5_MAC_LEN);
+        mvMD5Transform(ctx->buf, (MV_U32 *) ctx->in);
+
+        /* Now fill the next block with 56 bytes */
+        memset(ctx->in, 0, 56);
+    } 
+    else 
+    {
+        /* Pad block to 56 bytes */
+        memset(p, 0, count - 8);
+    }
+    mvByteReverse(ctx->in, 14);
+
+    /* Append length in bits and transform */
+    ((MV_U32 *) ctx->in)[14] = ctx->bits[0];
+    ((MV_U32 *) ctx->in)[15] = ctx->bits[1];
+
+    mvMD5Transform(ctx->buf, (MV_U32 *) ctx->in);
+    mvByteReverse((unsigned char *) ctx->buf, 4);
+    memcpy(digest, ctx->buf, MV_MD5_MAC_LEN);
+    memset(ctx, 0, sizeof(ctx));        /* In case it's sensitive */
+}
+
+/* The four core functions - F1 is optimized somewhat */
+
+/* #define F1(x, y, z) (x & y | ~x & z) */
+#define F1(x, y, z) (z ^ (x & (y ^ z)))
+#define F2(x, y, z) F1(z, x, y)
+#define F3(x, y, z) (x ^ y ^ z)
+#define F4(x, y, z) (y ^ (x | ~z))
+
+/* This is the central step in the MD5 algorithm. */
+#define MD5STEP(f, w, x, y, z, data, s) \
+        ( w += f(x, y, z) + data,  w = w<<s | w>>(32-s),  w += x )
+
+/*
+ * The core of the MD5 algorithm, this alters an existing MD5 hash to
+ * reflect the addition of 16 longwords of new data.  MD5Update blocks
+ * the data and converts bytes into longwords for this routine.
+ */
+static void mvMD5Transform(MV_U32 buf[4], MV_U32 const in[MV_MD5_MAC_LEN])
+{
+    register MV_U32 a, b, c, d;
+
+    a = buf[0];
+    b = buf[1];
+    c = buf[2];
+    d = buf[3];
+
+    MD5STEP(F1, a, b, c, d, in[0] + 0xd76aa478, 7);
+    MD5STEP(F1, d, a, b, c, in[1] + 0xe8c7b756, 12);
+    MD5STEP(F1, c, d, a, b, in[2] + 0x242070db, 17);
+    MD5STEP(F1, b, c, d, a, in[3] + 0xc1bdceee, 22);
+    MD5STEP(F1, a, b, c, d, in[4] + 0xf57c0faf, 7);
+    MD5STEP(F1, d, a, b, c, in[5] + 0x4787c62a, 12);
+    MD5STEP(F1, c, d, a, b, in[6] + 0xa8304613, 17);
+    MD5STEP(F1, b, c, d, a, in[7] + 0xfd469501, 22);
+    MD5STEP(F1, a, b, c, d, in[8] + 0x698098d8, 7);
+    MD5STEP(F1, d, a, b, c, in[9] + 0x8b44f7af, 12);
+    MD5STEP(F1, c, d, a, b, in[10] + 0xffff5bb1, 17);
+    MD5STEP(F1, b, c, d, a, in[11] + 0x895cd7be, 22);
+    MD5STEP(F1, a, b, c, d, in[12] + 0x6b901122, 7);
+    MD5STEP(F1, d, a, b, c, in[13] + 0xfd987193, 12);
+    MD5STEP(F1, c, d, a, b, in[14] + 0xa679438e, 17);
+    MD5STEP(F1, b, c, d, a, in[15] + 0x49b40821, 22);
+
+    MD5STEP(F2, a, b, c, d, in[1] + 0xf61e2562, 5);
+    MD5STEP(F2, d, a, b, c, in[6] + 0xc040b340, 9);
+    MD5STEP(F2, c, d, a, b, in[11] + 0x265e5a51, 14);
+    MD5STEP(F2, b, c, d, a, in[0] + 0xe9b6c7aa, 20);
+    MD5STEP(F2, a, b, c, d, in[5] + 0xd62f105d, 5);
+    MD5STEP(F2, d, a, b, c, in[10] + 0x02441453, 9);
+    MD5STEP(F2, c, d, a, b, in[15] + 0xd8a1e681, 14);
+    MD5STEP(F2, b, c, d, a, in[4] + 0xe7d3fbc8, 20);
+    MD5STEP(F2, a, b, c, d, in[9] + 0x21e1cde6, 5);
+    MD5STEP(F2, d, a, b, c, in[14] + 0xc33707d6, 9);
+    MD5STEP(F2, c, d, a, b, in[3] + 0xf4d50d87, 14);
+    MD5STEP(F2, b, c, d, a, in[8] + 0x455a14ed, 20);
+    MD5STEP(F2, a, b, c, d, in[13] + 0xa9e3e905, 5);
+    MD5STEP(F2, d, a, b, c, in[2] + 0xfcefa3f8, 9);
+    MD5STEP(F2, c, d, a, b, in[7] + 0x676f02d9, 14);
+    MD5STEP(F2, b, c, d, a, in[12] + 0x8d2a4c8a, 20);
+
+    MD5STEP(F3, a, b, c, d, in[5] + 0xfffa3942, 4);
+    MD5STEP(F3, d, a, b, c, in[8] + 0x8771f681, 11);
+    MD5STEP(F3, c, d, a, b, in[11] + 0x6d9d6122, 16);
+    MD5STEP(F3, b, c, d, a, in[14] + 0xfde5380c, 23);
+    MD5STEP(F3, a, b, c, d, in[1] + 0xa4beea44, 4);
+    MD5STEP(F3, d, a, b, c, in[4] + 0x4bdecfa9, 11);
+    MD5STEP(F3, c, d, a, b, in[7] + 0xf6bb4b60, 16);
+    MD5STEP(F3, b, c, d, a, in[10] + 0xbebfbc70, 23);
+    MD5STEP(F3, a, b, c, d, in[13] + 0x289b7ec6, 4);
+    MD5STEP(F3, d, a, b, c, in[0] + 0xeaa127fa, 11);
+    MD5STEP(F3, c, d, a, b, in[3] + 0xd4ef3085, 16);
+    MD5STEP(F3, b, c, d, a, in[6] + 0x04881d05, 23);
+    MD5STEP(F3, a, b, c, d, in[9] + 0xd9d4d039, 4);
+    MD5STEP(F3, d, a, b, c, in[12] + 0xe6db99e5, 11);
+    MD5STEP(F3, c, d, a, b, in[15] + 0x1fa27cf8, 16);
+    MD5STEP(F3, b, c, d, a, in[2] + 0xc4ac5665, 23);
+
+    MD5STEP(F4, a, b, c, d, in[0] + 0xf4292244, 6);
+    MD5STEP(F4, d, a, b, c, in[7] + 0x432aff97, 10);
+    MD5STEP(F4, c, d, a, b, in[14] + 0xab9423a7, 15);
+    MD5STEP(F4, b, c, d, a, in[5] + 0xfc93a039, 21);
+    MD5STEP(F4, a, b, c, d, in[12] + 0x655b59c3, 6);
+    MD5STEP(F4, d, a, b, c, in[3] + 0x8f0ccc92, 10);
+    MD5STEP(F4, c, d, a, b, in[10] + 0xffeff47d, 15);
+    MD5STEP(F4, b, c, d, a, in[1] + 0x85845dd1, 21);
+    MD5STEP(F4, a, b, c, d, in[8] + 0x6fa87e4f, 6);
+    MD5STEP(F4, d, a, b, c, in[15] + 0xfe2ce6e0, 10);
+    MD5STEP(F4, c, d, a, b, in[6] + 0xa3014314, 15);
+    MD5STEP(F4, b, c, d, a, in[13] + 0x4e0811a1, 21);
+    MD5STEP(F4, a, b, c, d, in[4] + 0xf7537e82, 6);
+    MD5STEP(F4, d, a, b, c, in[11] + 0xbd3af235, 10);
+    MD5STEP(F4, c, d, a, b, in[2] + 0x2ad7d2bb, 15);
+    MD5STEP(F4, b, c, d, a, in[9] + 0xeb86d391, 21);
+
+    buf[0] += a;
+    buf[1] += b;
+    buf[2] += c;
+    buf[3] += d;
+}
+
+void    mvMD5(unsigned char const *buf, unsigned len, unsigned char* digest)
+{
+    MV_MD5_CONTEXT  ctx;
+
+    mvMD5Init(&ctx);
+    mvMD5Update(&ctx, buf, len);
+    mvMD5Final(digest, &ctx);
+}
+
+
+void    mvHmacMd5(unsigned char const* text, int text_len,
+                  unsigned char const* key, int key_len,
+                  unsigned char* digest)
+{
+    int             i;
+    MV_MD5_CONTEXT  ctx;
+    unsigned char   k_ipad[64+1]; /* inner padding - key XORd with ipad */
+    unsigned char   k_opad[64+1]; /* outer padding - key XORd with opad */
+
+    /* start out by storing key in pads */
+    memset(k_ipad, 0, 64);
+    memcpy(k_ipad, key, key_len);
+    memset(k_opad, 0, 64);
+    memcpy(k_opad, key, key_len);
+
+    /* XOR key with ipad and opad values */
+    for (i=0; i<64; i++) 
+    {
+	    k_ipad[i] ^= 0x36;
+	    k_opad[i] ^= 0x5c;
+    }
+
+    /* perform inner MD5 */
+    mvMD5Init(&ctx);                   /* init ctx for 1st pass */
+    mvMD5Update(&ctx, k_ipad, 64);    /* start with inner pad */
+    mvMD5Update(&ctx, text, text_len); /* then text of datagram */
+    mvMD5Final(digest, &ctx);          /* finish up 1st pass */
+
+    /* perform outer MD5 */
+    mvMD5Init(&ctx);                   /* init ctx for 2nd pass */
+    mvMD5Update(&ctx, k_opad, 64);     /* start with outer pad */
+    mvMD5Update(&ctx, digest, 16);     /* then results of 1st hash */
+    mvMD5Final(digest, &ctx);          /* finish up 2nd pass */
+}
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvMD5.h b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvMD5.h
new file mode 100644
index 0000000000..d05c6b66fb
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvMD5.h
@@ -0,0 +1,93 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __mvMD5_h__
+#define __mvMD5_h__
+
+#include "mvMD5.h"
+
+#define MV_MD5_MAC_LEN 16
+ 
+ 
+typedef struct 
+{
+    MV_U32 buf[4];
+    MV_U32 bits[2];
+    MV_U8  in[64];
+
+} MV_MD5_CONTEXT;
+ 
+void mvMD5Init(MV_MD5_CONTEXT *context);
+void mvMD5Update(MV_MD5_CONTEXT *context, unsigned char const *buf,
+                unsigned len);
+void mvMD5Final(unsigned char digest[16], MV_MD5_CONTEXT *context);
+
+void mvMD5(unsigned char const *buf, unsigned len, unsigned char* digest);
+
+void mvHmacMd5(unsigned char const* text, int text_len,
+                  unsigned char const* key, int key_len,
+                  unsigned char* digest);
+  
+
+#endif /* __mvMD5_h__ */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvSHA1.c b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvSHA1.c
new file mode 100644
index 0000000000..0e0786b0ca
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvSHA1.c
@@ -0,0 +1,239 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "mvOs.h"
+#include "mvSHA1.h"
+
+#define SHA1HANDSOFF  
+
+typedef union 
+{
+    MV_U8   c[64];
+    MV_U32  l[16];
+
+} CHAR64LONG16;
+
+static void mvSHA1Transform(MV_U32 state[5], const MV_U8 *buffer); 
+
+#define rol(value, bits) (((value) << (bits)) | ((value) >> (32 - (bits))))
+
+ 
+#ifdef MV_CPU_LE
+#define blk0(i) (block->l[i] = (rol(block->l[i], 24) & 0xFF00FF00) | \
+        (rol(block->l[i], 8) & 0x00FF00FF))
+#else
+#define blk0(i) block->l[i]
+#endif
+#define blk(i) (block->l[i & 15] = rol(block->l[(i + 13) & 15] ^ \
+        block->l[(i + 8) & 15] ^ block->l[(i + 2) & 15] ^ block->l[i & 15], 1))
+
+/* (R0+R1), R2, R3, R4 are the different operations used in SHA1 */
+#define R0(v,w,x,y,z,i) \
+        z += ((w & (x ^ y)) ^ y) + blk0(i) + 0x5A827999 + rol(v, 5); \
+        w = rol(w, 30);
+#define R1(v,w,x,y,z,i) \
+        z += ((w & (x ^ y)) ^ y) + blk(i) + 0x5A827999 + rol(v, 5); \
+        w = rol(w, 30);
+#define R2(v,w,x,y,z,i) \
+        z += (w ^ x ^ y) + blk(i) + 0x6ED9EBA1 + rol(v, 5); w = rol(w, 30);
+#define R3(v,w,x,y,z,i) \
+        z += (((w | x) & y) | (w & x)) + blk(i) + 0x8F1BBCDC + rol(v, 5); \
+        w = rol(w, 30);
+#define R4(v,w,x,y,z,i) \
+        z += (w ^ x ^ y) + blk(i) + 0xCA62C1D6 + rol(v, 5); \
+        w=rol(w, 30);
+
+/* Hash a single 512-bit block. This is the core of the algorithm. */
+static void    mvSHA1Transform(MV_U32 state[5], const MV_U8 *buffer)
+{
+    MV_U32          a, b, c, d, e;
+    CHAR64LONG16*   block;
+
+#ifdef SHA1HANDSOFF
+    static MV_U32  workspace[16];
+
+    block = (CHAR64LONG16 *) workspace;
+    memcpy(block, buffer, 64);
+#else
+    block = (CHAR64LONG16 *) buffer;
+#endif
+    /* Copy context->state[] to working vars */
+    a = state[0];
+    b = state[1];
+    c = state[2];
+    d = state[3];
+    e = state[4];
+    /* 4 rounds of 20 operations each. Loop unrolled. */
+    R0(a,b,c,d,e, 0); R0(e,a,b,c,d, 1); R0(d,e,a,b,c, 2); R0(c,d,e,a,b, 3);
+    R0(b,c,d,e,a, 4); R0(a,b,c,d,e, 5); R0(e,a,b,c,d, 6); R0(d,e,a,b,c, 7);
+    R0(c,d,e,a,b, 8); R0(b,c,d,e,a, 9); R0(a,b,c,d,e,10); R0(e,a,b,c,d,11);
+    R0(d,e,a,b,c,12); R0(c,d,e,a,b,13); R0(b,c,d,e,a,14); R0(a,b,c,d,e,15);
+    R1(e,a,b,c,d,16); R1(d,e,a,b,c,17); R1(c,d,e,a,b,18); R1(b,c,d,e,a,19);
+    R2(a,b,c,d,e,20); R2(e,a,b,c,d,21); R2(d,e,a,b,c,22); R2(c,d,e,a,b,23);
+    R2(b,c,d,e,a,24); R2(a,b,c,d,e,25); R2(e,a,b,c,d,26); R2(d,e,a,b,c,27);
+    R2(c,d,e,a,b,28); R2(b,c,d,e,a,29); R2(a,b,c,d,e,30); R2(e,a,b,c,d,31);
+    R2(d,e,a,b,c,32); R2(c,d,e,a,b,33); R2(b,c,d,e,a,34); R2(a,b,c,d,e,35);
+    R2(e,a,b,c,d,36); R2(d,e,a,b,c,37); R2(c,d,e,a,b,38); R2(b,c,d,e,a,39);
+    R3(a,b,c,d,e,40); R3(e,a,b,c,d,41); R3(d,e,a,b,c,42); R3(c,d,e,a,b,43);
+    R3(b,c,d,e,a,44); R3(a,b,c,d,e,45); R3(e,a,b,c,d,46); R3(d,e,a,b,c,47);
+    R3(c,d,e,a,b,48); R3(b,c,d,e,a,49); R3(a,b,c,d,e,50); R3(e,a,b,c,d,51);
+    R3(d,e,a,b,c,52); R3(c,d,e,a,b,53); R3(b,c,d,e,a,54); R3(a,b,c,d,e,55);
+    R3(e,a,b,c,d,56); R3(d,e,a,b,c,57); R3(c,d,e,a,b,58); R3(b,c,d,e,a,59);
+    R4(a,b,c,d,e,60); R4(e,a,b,c,d,61); R4(d,e,a,b,c,62); R4(c,d,e,a,b,63);
+    R4(b,c,d,e,a,64); R4(a,b,c,d,e,65); R4(e,a,b,c,d,66); R4(d,e,a,b,c,67);
+    R4(c,d,e,a,b,68); R4(b,c,d,e,a,69); R4(a,b,c,d,e,70); R4(e,a,b,c,d,71);
+    R4(d,e,a,b,c,72); R4(c,d,e,a,b,73); R4(b,c,d,e,a,74); R4(a,b,c,d,e,75);
+    R4(e,a,b,c,d,76); R4(d,e,a,b,c,77); R4(c,d,e,a,b,78); R4(b,c,d,e,a,79);
+    /* Add the working vars back into context.state[] */
+    state[0] += a;
+    state[1] += b;
+    state[2] += c;
+    state[3] += d;
+    state[4] += e;
+    /* Wipe variables */
+    a = b = c = d = e = 0;
+}
+
+void    mvSHA1Init(MV_SHA1_CTX* context)
+{
+    /* SHA1 initialization constants */
+    context->state[0] = 0x67452301;
+    context->state[1] = 0xEFCDAB89;
+    context->state[2] = 0x98BADCFE;
+    context->state[3] = 0x10325476;
+    context->state[4] = 0xC3D2E1F0;
+    context->count[0] = context->count[1] = 0;
+}
+
+
+/* Run your data through this. */
+void    mvSHA1Update(MV_SHA1_CTX *context, MV_U8 const *data, 
+                     unsigned int len)
+{
+    MV_U32 i, j;
+
+    j = (context->count[0] >> 3) & 63;
+    if ((context->count[0] += len << 3) < (len << 3))
+            context->count[1]++;
+    context->count[1] += (len >> 29);
+    if ((j + len) > 63) 
+    {
+        memcpy(&context->buffer[j], data, (i = 64-j));
+        mvSHA1Transform(context->state, context->buffer);
+        for ( ; i + 63 < len; i += 64) 
+        {
+            mvSHA1Transform(context->state, &data[i]);
+        }
+        j = 0;
+    }
+    else
+    {
+        i = 0;
+    }
+    memcpy(&context->buffer[j], &data[i], len - i);
+}
+
+void    mvSHA1Final(MV_U8* digest, MV_SHA1_CTX* context)
+{
+    MV_U32  i;
+    MV_U8   finalcount[8];
+
+    for (i = 0; i < 8; i++) 
+    {
+        finalcount[i] = (unsigned char)((context->count[(i >= 4 ? 0 : 1)] >>
+                      ((3-(i & 3)) * 8) ) & 255);  /* Endian independent */
+    }
+    mvSHA1Update(context, (const unsigned char *) "\200", 1);
+    while ((context->count[0] & 504) != 448) 
+    {
+        mvSHA1Update(context, (const unsigned char *) "\0", 1);
+    }
+    mvSHA1Update(context, finalcount, 8);  /* Should cause a mvSHA1Transform()
+                                          */
+    for (i = 0; i < 20; i++) 
+    {
+        digest[i] = (unsigned char)
+                    ((context->state[i >> 2] >> ((3 - (i & 3)) * 8)) & 255);
+    }
+    /* Wipe variables */
+    i = 0;
+    memset(context->buffer, 0, 64);
+    memset(context->state, 0, 20);
+    memset(context->count, 0, 8);
+    memset(finalcount, 0, 8);
+
+#ifdef SHA1HANDSOFF  /* make SHA1Transform overwrite it's own static vars */
+    mvSHA1Transform(context->state, context->buffer);
+#endif 
+}
+
+
+void mvSHA1(MV_U8 const *buf, unsigned int len, MV_U8* digest)
+{
+    MV_SHA1_CTX  ctx;
+
+    mvSHA1Init(&ctx);
+    mvSHA1Update(&ctx, buf, len);
+    mvSHA1Final(digest, &ctx);
+}
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvSHA1.h b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvSHA1.h
new file mode 100644
index 0000000000..17df9fcdbf
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/cesa/mvSHA1.h
@@ -0,0 +1,88 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __mvSHA1_h__
+#define __mvSHA1_h__
+
+#include "mvSHA1.h"
+
+#define MV_SHA1_MAC_LEN 20
+ 
+ 
+typedef struct 
+{
+    MV_U32 state[5];
+    MV_U32 count[2];
+    MV_U8  buffer[64];
+
+} MV_SHA1_CTX; 
+ 
+void mvSHA1Init(MV_SHA1_CTX *context);
+void mvSHA1Update(MV_SHA1_CTX *context, MV_U8 const *buf, unsigned int len);
+void mvSHA1Final(MV_U8* digest, MV_SHA1_CTX *context);
+
+void mvSHA1(MV_U8 const *buf, unsigned int len, MV_U8* digest);
+  
+
+#endif /* __mvSHA1_h__ */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/cesa_ocf_drv.c b/target/linux/generic/files/crypto/ocf/kirkwood/cesa_ocf_drv.c
new file mode 100644
index 0000000000..ccf92276c0
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/cesa_ocf_drv.c
@@ -0,0 +1,1296 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED.  The GPL License provides additional details about this warranty
+disclaimer.
+*******************************************************************************/
+
+#ifndef AUTOCONF_INCLUDED
+#include <linux/config.h>
+#endif
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/crypto.h>
+#include <linux/mm.h>
+#include <linux/skbuff.h>
+#include <linux/random.h>
+#include <linux/platform_device.h>
+#include <asm/scatterlist.h>
+#include <linux/spinlock.h>
+#include "ctrlEnv/sys/mvSysCesa.h"
+#include "cesa/mvCesa.h" /* moved here before cryptodev.h due to include dependencies */
+#include <cryptodev.h>
+#include <uio.h>
+#include <plat/mv_cesa.h>
+#include <linux/mbus.h>
+#include "mvDebug.h"
+
+#include "cesa/mvMD5.h"
+#include "cesa/mvSHA1.h"
+
+#include "cesa/mvCesaRegs.h"
+#include "cesa/AES/mvAes.h"
+#include "cesa/mvLru.h"
+
+#undef  RT_DEBUG
+#ifdef RT_DEBUG
+static int debug = 1;
+module_param(debug, int, 1);
+MODULE_PARM_DESC(debug, "Enable debug");
+#undef dprintk
+#define dprintk(a...)	if (debug) { printk(a); } else
+#else
+static int debug = 0;
+#undef dprintk
+#define dprintk(a...)
+#endif
+
+
+/* TDMA Regs */
+#define WINDOW_BASE(i) 0xA00 + (i << 3)
+#define WINDOW_CTRL(i) 0xA04 + (i << 3)
+
+/* interrupt handling */
+#undef CESA_OCF_POLLING
+#undef CESA_OCF_TASKLET
+
+#if defined(CESA_OCF_POLLING) && defined(CESA_OCF_TASKLET)
+#error "don't use both tasklet and polling mode"
+#endif
+
+extern int cesaReqResources;
+/* support for spliting action into 2 actions */
+#define CESA_OCF_SPLIT
+
+/* general defines */
+#define CESA_OCF_MAX_SES 128
+#define CESA_Q_SIZE	 64
+
+
+/* data structures */
+struct cesa_ocf_data {
+        int                                      cipher_alg;
+        int                                      auth_alg;
+	int					 encrypt_tn_auth;
+#define  auth_tn_decrypt  encrypt_tn_auth
+	int					 ivlen;
+	int 					 digestlen;
+	short					 sid_encrypt;
+	short					 sid_decrypt;
+	/* fragment workaround sessions */
+	short					 frag_wa_encrypt;
+	short					 frag_wa_decrypt;
+	short					 frag_wa_auth;
+};
+
+/* CESA device data */
+struct cesa_dev {
+	void __iomem *sram;
+	void __iomem *reg;
+        struct mv_cesa_platform_data *plat_data;
+	int irq;
+};
+
+#define DIGEST_BUF_SIZE	32
+struct cesa_ocf_process {
+	MV_CESA_COMMAND 			cesa_cmd;
+	MV_CESA_MBUF 				cesa_mbuf;	
+	MV_BUF_INFO  				cesa_bufs[MV_CESA_MAX_MBUF_FRAGS];
+	char					digest[DIGEST_BUF_SIZE];
+	int					digest_len;
+	struct cryptop 				*crp;
+	int 					need_cb;
+};
+
+/* global variables */
+static int32_t			cesa_ocf_id 		= -1;
+static struct cesa_ocf_data 	*cesa_ocf_sessions[CESA_OCF_MAX_SES];
+static spinlock_t 		cesa_lock;
+static struct cesa_dev cesa_device;
+
+/* static APIs */
+static int 		cesa_ocf_process	(device_t, struct cryptop *, int);
+static int 		cesa_ocf_newsession	(device_t, u_int32_t *, struct cryptoini *);
+static int 		cesa_ocf_freesession	(device_t, u_int64_t);
+static void 		cesa_callback		(unsigned long);
+static irqreturn_t	cesa_interrupt_handler	(int, void *);
+#ifdef CESA_OCF_POLLING
+static void cesa_interrupt_polling(void);
+#endif
+#ifdef CESA_OCF_TASKLET
+static struct tasklet_struct cesa_ocf_tasklet;
+#endif
+
+static struct timeval          tt_start;
+static struct timeval          tt_end;
+
+/*
+ * dummy device structure
+ */
+
+static struct {
+	softc_device_decl	sc_dev;
+} mv_cesa_dev;
+
+static device_method_t mv_cesa_methods = {
+	/* crypto device methods */
+	DEVMETHOD(cryptodev_newsession,	cesa_ocf_newsession),
+	DEVMETHOD(cryptodev_freesession,cesa_ocf_freesession),
+	DEVMETHOD(cryptodev_process,	cesa_ocf_process),
+	DEVMETHOD(cryptodev_kprocess,	NULL),
+};
+
+
+
+/* Add debug Trace */
+#undef CESA_OCF_TRACE_DEBUG
+#ifdef CESA_OCF_TRACE_DEBUG
+
+#define MV_CESA_USE_TIMER_ID    0
+
+typedef struct
+{
+    int             type;       /* 0 - isrEmpty, 1 - cesaReadyGet, 2 - cesaAction */
+    MV_U32          timeStamp;
+    MV_U32          cause;
+    MV_U32          realCause;
+    MV_U32          dmaCause;
+    int             resources;
+    MV_CESA_REQ*    pReqReady;
+    MV_CESA_REQ*    pReqEmpty;
+    MV_CESA_REQ*    pReqProcess;
+} MV_CESA_TEST_TRACE;
+
+#define MV_CESA_TEST_TRACE_SIZE      50
+
+static int cesaTestTraceIdx = 0;
+static MV_CESA_TEST_TRACE    cesaTestTrace[MV_CESA_TEST_TRACE_SIZE];
+
+static void cesaTestTraceAdd(int type)
+{
+    cesaTestTrace[cesaTestTraceIdx].type = type;
+    cesaTestTrace[cesaTestTraceIdx].realCause = MV_REG_READ(MV_CESA_ISR_CAUSE_REG);
+    //cesaTestTrace[cesaTestTraceIdx].idmaCause = MV_REG_READ(IDMA_CAUSE_REG);
+    cesaTestTrace[cesaTestTraceIdx].resources = cesaReqResources;
+    cesaTestTrace[cesaTestTraceIdx].pReqReady = pCesaReqReady;
+    cesaTestTrace[cesaTestTraceIdx].pReqEmpty = pCesaReqEmpty;
+    cesaTestTrace[cesaTestTraceIdx].pReqProcess = pCesaReqProcess;
+    cesaTestTrace[cesaTestTraceIdx].timeStamp = mvCntmrRead(MV_CESA_USE_TIMER_ID);
+    cesaTestTraceIdx++;
+    if(cesaTestTraceIdx == MV_CESA_TEST_TRACE_SIZE)
+        cesaTestTraceIdx = 0;
+}
+
+#else /* CESA_OCF_TRACE_DEBUG */
+
+#define cesaTestTraceAdd(x)
+
+#endif /* CESA_OCF_TRACE_DEBUG */
+
+unsigned int
+get_usec(unsigned int start)
+{
+	if(start) {
+		do_gettimeofday (&tt_start);
+		return 0;
+	}
+	else {
+        	do_gettimeofday (&tt_end);
+        	tt_end.tv_sec -= tt_start.tv_sec;
+        	tt_end.tv_usec -= tt_start.tv_usec;
+        	if (tt_end.tv_usec < 0) {
+                	tt_end.tv_usec += 1000 * 1000;
+                	tt_end.tv_sec -= 1;
+        	}
+	}
+	printk("time taken is  %d\n", (unsigned int)(tt_end.tv_usec + tt_end.tv_sec * 1000000));
+	return (tt_end.tv_usec + tt_end.tv_sec * 1000000);
+}
+
+#ifdef RT_DEBUG
+/* 
+ * check that the crp action match the current session
+ */
+static int 
+ocf_check_action(struct cryptop *crp, struct cesa_ocf_data *cesa_ocf_cur_ses) {
+	int count = 0;
+	int encrypt = 0, decrypt = 0, auth = 0;
+	struct cryptodesc *crd;
+
+        /* Go through crypto descriptors, processing as we go */
+        for (crd = crp->crp_desc; crd; crd = crd->crd_next, count++) {
+		if(count > 2) {
+			printk("%s,%d: session mode is not supported.\n", __FILE__, __LINE__);
+			return 1;
+		}
+		
+		/* Encryption /Decryption */
+		if(crd->crd_alg == cesa_ocf_cur_ses->cipher_alg) {
+			/* check that the action is compatible with session */
+			if(encrypt || decrypt) {
+				printk("%s,%d: session mode is not supported.\n", __FILE__, __LINE__);
+				return 1;
+			}
+
+			if(crd->crd_flags & CRD_F_ENCRYPT) { /* encrypt */
+				if( (count == 2) && (cesa_ocf_cur_ses->encrypt_tn_auth) ) {
+					printk("%s,%d: sequence isn't supported by this session.\n", __FILE__, __LINE__);
+					return 1;
+				}
+				encrypt++;
+			}
+			else { 					/* decrypt */
+				if( (count == 2) && !(cesa_ocf_cur_ses->auth_tn_decrypt) ) {
+					printk("%s,%d: sequence isn't supported by this session.\n", __FILE__, __LINE__);
+					return 1;
+				}
+				decrypt++;
+			}
+
+		}
+		/* Authentication */
+		else if(crd->crd_alg == cesa_ocf_cur_ses->auth_alg) {
+			/* check that the action is compatible with session */
+			if(auth) {
+				printk("%s,%d: session mode is not supported.\n", __FILE__, __LINE__);
+				return 1;
+			}
+			if( (count == 2) && (decrypt) && (cesa_ocf_cur_ses->auth_tn_decrypt)) {
+				printk("%s,%d: sequence isn't supported by this session.\n", __FILE__, __LINE__);
+				return 1;
+			}
+			if( (count == 2) && (encrypt) && !(cesa_ocf_cur_ses->encrypt_tn_auth)) {
+				printk("%s,%d: sequence isn't supported by this session.\n", __FILE__, __LINE__);
+				return 1;
+			}
+			auth++;
+		} 
+		else {
+			printk("%s,%d: Alg isn't supported by this session.\n", __FILE__, __LINE__);
+			return 1;
+		}
+	}
+	return 0;
+
+}
+#endif
+
+/*
+ * Process a request.
+ */
+static int 
+cesa_ocf_process(device_t dev, struct cryptop *crp, int hint)
+{
+	struct cesa_ocf_process *cesa_ocf_cmd = NULL;
+	struct cesa_ocf_process *cesa_ocf_cmd_wa = NULL;
+	MV_CESA_COMMAND	*cesa_cmd;
+	struct cryptodesc *crd;
+	struct cesa_ocf_data *cesa_ocf_cur_ses;
+	int sid = 0, temp_len = 0, i;
+	int encrypt = 0, decrypt = 0, auth = 0;
+	int  status;
+	struct sk_buff *skb = NULL;
+	struct uio *uiop = NULL;
+	unsigned char *ivp;
+	MV_BUF_INFO *p_buf_info;	
+	MV_CESA_MBUF *p_mbuf_info;
+	unsigned long flags;
+
+        dprintk("%s()\n", __FUNCTION__);
+
+	if( cesaReqResources <= 1 ) {
+                dprintk("%s,%d: ERESTART\n", __FILE__, __LINE__);
+                return ERESTART;
+	}
+
+#ifdef RT_DEBUG
+        /* Sanity check */
+        if (crp == NULL) {
+                printk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+                return EINVAL;
+        }
+
+        if (crp->crp_desc == NULL || crp->crp_buf == NULL ) {
+                printk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+                crp->crp_etype = EINVAL;
+                return EINVAL;
+        }
+
+        sid = crp->crp_sid & 0xffffffff;
+        if ((sid >= CESA_OCF_MAX_SES) || (cesa_ocf_sessions[sid] == NULL)) {
+                crp->crp_etype = ENOENT;
+                printk("%s,%d: ENOENT session %d \n", __FILE__, __LINE__, sid);
+                return EINVAL;
+        }
+#endif
+
+	sid = crp->crp_sid & 0xffffffff;
+	crp->crp_etype = 0;
+	cesa_ocf_cur_ses = cesa_ocf_sessions[sid];
+
+#ifdef RT_DEBUG
+	if(ocf_check_action(crp, cesa_ocf_cur_ses)){
+		goto p_error;
+	}
+#endif
+
+	/* malloc a new  cesa process */	
+	cesa_ocf_cmd = kmalloc(sizeof(struct cesa_ocf_process), GFP_ATOMIC);
+	
+        if (cesa_ocf_cmd == NULL) {
+            	printk("%s,%d: ENOBUFS \n", __FILE__, __LINE__);
+            	goto p_error;
+      	}
+	memset(cesa_ocf_cmd, 0, sizeof(struct cesa_ocf_process));
+
+	/* init cesa_process */
+	cesa_ocf_cmd->crp = crp;
+	/* always call callback */
+	cesa_ocf_cmd->need_cb = 1;
+
+	/* init cesa_cmd for usage of the HALs */
+	cesa_cmd = &cesa_ocf_cmd->cesa_cmd;
+	cesa_cmd->pReqPrv = (void *)cesa_ocf_cmd;
+	cesa_cmd->sessionId = cesa_ocf_cur_ses->sid_encrypt; /* defualt use encrypt */
+
+	/* prepare src buffer 	*/
+	/* we send the entire buffer to the HAL, even if only part of it should be encrypt/auth.  */
+	/* if not using seesions for both encrypt and auth, then it will be wiser to to copy only */
+	/* from skip to crd_len. 								  */
+	p_buf_info = cesa_ocf_cmd->cesa_bufs;	
+	p_mbuf_info = &cesa_ocf_cmd->cesa_mbuf;
+
+	p_buf_info += 2; /* save 2 first buffers for IV and digest - 
+			    we won't append them to the end since, they 
+			    might be places in an unaligned addresses. */
+	
+	p_mbuf_info->pFrags = p_buf_info;
+	temp_len = 0;
+
+	/* handle SKB */
+	if (crp->crp_flags & CRYPTO_F_SKBUF) {
+		
+		dprintk("%s,%d: handle SKB.\n", __FILE__, __LINE__);
+		skb = (struct sk_buff *) crp->crp_buf;
+
+                if (skb_shinfo(skb)->nr_frags >= (MV_CESA_MAX_MBUF_FRAGS - 1)) {
+                        printk("%s,%d: %d nr_frags > MV_CESA_MAX_MBUF_FRAGS", __FILE__, __LINE__, skb_shinfo(skb)->nr_frags);
+                        goto p_error;
+                }
+
+		p_mbuf_info->mbufSize = skb->len;
+		temp_len = skb->len;
+        	/* first skb fragment */
+        	p_buf_info->bufSize = skb_headlen(skb);
+        	p_buf_info->bufVirtPtr = skb->data;
+		p_buf_info++;
+
+        	/* now handle all other skb fragments */
+        	for ( i = 0; i < skb_shinfo(skb)->nr_frags; i++ ) {
+            		skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+            		p_buf_info->bufSize = frag->size;
+            		p_buf_info->bufVirtPtr = page_address(frag->page) + frag->page_offset;
+            		p_buf_info++;
+        	}
+        	p_mbuf_info->numFrags = skb_shinfo(skb)->nr_frags + 1;
+	}
+	/* handle UIO */
+	else if(crp->crp_flags & CRYPTO_F_IOV) {
+	
+		dprintk("%s,%d: handle UIO.\n", __FILE__, __LINE__);
+		uiop = (struct uio *) crp->crp_buf;
+
+                if (uiop->uio_iovcnt > (MV_CESA_MAX_MBUF_FRAGS - 1)) {
+                        printk("%s,%d: %d uio_iovcnt > MV_CESA_MAX_MBUF_FRAGS \n", __FILE__, __LINE__, uiop->uio_iovcnt);
+                        goto p_error;
+                }
+
+		p_mbuf_info->mbufSize = crp->crp_ilen;
+		p_mbuf_info->numFrags = uiop->uio_iovcnt;
+		for(i = 0; i < uiop->uio_iovcnt; i++) {
+			p_buf_info->bufVirtPtr = uiop->uio_iov[i].iov_base;
+			p_buf_info->bufSize = uiop->uio_iov[i].iov_len;
+			temp_len += p_buf_info->bufSize;
+			dprintk("%s,%d: buf %x-> addr %x, size %x \n"
+				, __FILE__, __LINE__, i, (unsigned int)p_buf_info->bufVirtPtr, p_buf_info->bufSize);
+			p_buf_info++;			
+		}
+
+	}
+	/* handle CONTIG */
+	else {
+		dprintk("%s,%d: handle CONTIG.\n", __FILE__, __LINE__); 
+		p_mbuf_info->numFrags = 1;
+		p_mbuf_info->mbufSize = crp->crp_ilen;
+		p_buf_info->bufVirtPtr = crp->crp_buf;
+		p_buf_info->bufSize = crp->crp_ilen;
+		temp_len = crp->crp_ilen;
+		p_buf_info++;
+	}
+	
+	/* Support up to 64K why? cause! */
+	if(crp->crp_ilen > 64*1024) {
+		printk("%s,%d: buf too big %x \n", __FILE__, __LINE__, crp->crp_ilen);
+		goto p_error;
+	}
+
+	if( temp_len != crp->crp_ilen ) {
+		printk("%s,%d: warning size don't match.(%x %x) \n", __FILE__, __LINE__, temp_len, crp->crp_ilen);
+	}	
+
+	cesa_cmd->pSrc = p_mbuf_info;
+	cesa_cmd->pDst = p_mbuf_info;
+	
+	/* restore p_buf_info to point to first available buf */
+	p_buf_info = cesa_ocf_cmd->cesa_bufs;	
+	p_buf_info += 1; 
+
+
+        /* Go through crypto descriptors, processing as we go */
+        for (crd = crp->crp_desc; crd; crd = crd->crd_next) {
+		
+		/* Encryption /Decryption */
+		if(crd->crd_alg == cesa_ocf_cur_ses->cipher_alg) {
+
+			dprintk("%s,%d: cipher", __FILE__, __LINE__);
+
+			cesa_cmd->cryptoOffset = crd->crd_skip;
+    	              	cesa_cmd->cryptoLength = crd->crd_len;
+
+			if(crd->crd_flags & CRD_F_ENCRYPT) { /* encrypt */
+				dprintk(" encrypt \n");
+				encrypt++;
+
+				/* handle IV */
+				if (crd->crd_flags & CRD_F_IV_EXPLICIT) {  /* IV from USER */
+					dprintk("%s,%d: IV from USER (offset %x) \n", __FILE__, __LINE__, crd->crd_inject);
+					cesa_cmd->ivFromUser = 1;
+					ivp = crd->crd_iv;
+
+                                	/*
+                                 	 * do we have to copy the IV back to the buffer ?
+                                 	 */
+                                	if ((crd->crd_flags & CRD_F_IV_PRESENT) == 0) {
+						dprintk("%s,%d: copy the IV back to the buffer\n", __FILE__, __LINE__);
+						cesa_cmd->ivOffset = crd->crd_inject;
+						crypto_copy_bits_back(crp->crp_buf, crd->crd_inject, ivp, cesa_ocf_cur_ses->ivlen);
+                                	}
+					else {
+						dprintk("%s,%d: don't copy the IV back to the buffer \n", __FILE__, __LINE__);
+						p_mbuf_info->numFrags++;
+						p_mbuf_info->mbufSize += cesa_ocf_cur_ses->ivlen; 
+						p_mbuf_info->pFrags = p_buf_info;
+
+						p_buf_info->bufVirtPtr = ivp;
+						p_buf_info->bufSize = cesa_ocf_cur_ses->ivlen; 
+						p_buf_info--;
+
+						/* offsets */
+						cesa_cmd->ivOffset = 0;
+						cesa_cmd->cryptoOffset += cesa_ocf_cur_ses->ivlen;
+						if(auth) {
+							cesa_cmd->macOffset += cesa_ocf_cur_ses->ivlen;
+							cesa_cmd->digestOffset += cesa_ocf_cur_ses->ivlen; 
+						}	
+					}
+                                }
+				else {					/* random IV */
+					dprintk("%s,%d: random IV \n", __FILE__, __LINE__);
+					cesa_cmd->ivFromUser = 0;
+
+                                	/*
+                                 	 * do we have to copy the IV back to the buffer ?
+                                 	 */
+					/* in this mode the HAL will always copy the IV */
+					/* given by the session to the ivOffset  	*/
+					if ((crd->crd_flags & CRD_F_IV_PRESENT) == 0) {
+						cesa_cmd->ivOffset = crd->crd_inject;
+					} 
+					else {
+						/* if IV isn't copy, then how will the user know which IV did we use??? */
+						printk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+						goto p_error; 
+					}
+				}
+			}
+			else { 					/* decrypt */
+				dprintk(" decrypt \n");
+				decrypt++;
+				cesa_cmd->sessionId = cesa_ocf_cur_ses->sid_decrypt;
+
+				/* handle IV */
+				if (crd->crd_flags & CRD_F_IV_EXPLICIT) {
+					dprintk("%s,%d: IV from USER \n", __FILE__, __LINE__);
+					/* append the IV buf to the mbuf */
+					cesa_cmd->ivFromUser = 1;	
+					p_mbuf_info->numFrags++;
+					p_mbuf_info->mbufSize += cesa_ocf_cur_ses->ivlen; 
+					p_mbuf_info->pFrags = p_buf_info;
+
+					p_buf_info->bufVirtPtr = crd->crd_iv;
+					p_buf_info->bufSize = cesa_ocf_cur_ses->ivlen; 
+					p_buf_info--;
+
+					/* offsets */
+					cesa_cmd->ivOffset = 0;
+					cesa_cmd->cryptoOffset += cesa_ocf_cur_ses->ivlen;
+					if(auth) {
+						cesa_cmd->macOffset += cesa_ocf_cur_ses->ivlen;
+						cesa_cmd->digestOffset += cesa_ocf_cur_ses->ivlen; 
+					}
+                                }
+				else {
+					dprintk("%s,%d: IV inside the buffer \n", __FILE__, __LINE__);
+					cesa_cmd->ivFromUser = 0;
+					cesa_cmd->ivOffset = crd->crd_inject;
+				}
+			}
+
+		}
+		/* Authentication */
+		else if(crd->crd_alg == cesa_ocf_cur_ses->auth_alg) {
+			dprintk("%s,%d:  Authentication \n", __FILE__, __LINE__);
+			auth++;
+			cesa_cmd->macOffset = crd->crd_skip;
+			cesa_cmd->macLength = crd->crd_len;
+
+			/* digest + mac */
+			cesa_cmd->digestOffset = crd->crd_inject;
+		} 
+		else {
+			printk("%s,%d: Alg isn't supported by this session.\n", __FILE__, __LINE__);
+			goto p_error;
+		}
+	}
+
+	dprintk("\n");
+	dprintk("%s,%d: Sending Action: \n", __FILE__, __LINE__);
+	dprintk("%s,%d: IV from user: %d. IV offset %x \n",  __FILE__, __LINE__, cesa_cmd->ivFromUser, cesa_cmd->ivOffset);
+	dprintk("%s,%d: crypt offset %x len %x \n", __FILE__, __LINE__, cesa_cmd->cryptoOffset, cesa_cmd->cryptoLength);
+	dprintk("%s,%d: Auth offset %x len %x \n", __FILE__, __LINE__, cesa_cmd->macOffset, cesa_cmd->macLength);
+	dprintk("%s,%d: set digest in offset %x . \n", __FILE__, __LINE__, cesa_cmd->digestOffset);
+	if(debug) {
+		mvCesaDebugMbuf("SRC BUFFER", cesa_cmd->pSrc, 0, cesa_cmd->pSrc->mbufSize);
+	}
+
+
+	/* send action to HAL */
+	spin_lock_irqsave(&cesa_lock, flags);
+	status = mvCesaAction(cesa_cmd);
+	spin_unlock_irqrestore(&cesa_lock, flags);
+
+	/* action not allowed */
+	if(status == MV_NOT_ALLOWED) {
+#ifdef CESA_OCF_SPLIT
+		/* if both encrypt and auth try to split */
+		if(auth && (encrypt || decrypt)) {
+			MV_CESA_COMMAND	*cesa_cmd_wa;
+
+			/* malloc a new cesa process and init it */	
+			cesa_ocf_cmd_wa = kmalloc(sizeof(struct cesa_ocf_process), GFP_ATOMIC);
+	
+        		if (cesa_ocf_cmd_wa == NULL) {
+            			printk("%s,%d: ENOBUFS \n", __FILE__, __LINE__);
+            			goto p_error;
+      			}
+			memcpy(cesa_ocf_cmd_wa, cesa_ocf_cmd, sizeof(struct cesa_ocf_process));
+			cesa_cmd_wa = &cesa_ocf_cmd_wa->cesa_cmd;
+			cesa_cmd_wa->pReqPrv = (void *)cesa_ocf_cmd_wa;
+			cesa_ocf_cmd_wa->need_cb = 0;
+
+			/* break requests to two operation, first operation completion won't call callback */
+			if((decrypt) && (cesa_ocf_cur_ses->auth_tn_decrypt)) {
+				cesa_cmd_wa->sessionId = cesa_ocf_cur_ses->frag_wa_auth;
+				cesa_cmd->sessionId = cesa_ocf_cur_ses->frag_wa_decrypt;
+			}
+			else if((decrypt) && !(cesa_ocf_cur_ses->auth_tn_decrypt)) {
+				cesa_cmd_wa->sessionId = cesa_ocf_cur_ses->frag_wa_decrypt;
+				cesa_cmd->sessionId = cesa_ocf_cur_ses->frag_wa_auth;
+			}
+			else if((encrypt) && (cesa_ocf_cur_ses->encrypt_tn_auth)) {
+				cesa_cmd_wa->sessionId = cesa_ocf_cur_ses->frag_wa_encrypt;
+				cesa_cmd->sessionId = cesa_ocf_cur_ses->frag_wa_auth;
+			}
+			else if((encrypt) && !(cesa_ocf_cur_ses->encrypt_tn_auth)){
+				cesa_cmd_wa->sessionId = cesa_ocf_cur_ses->frag_wa_auth;
+				cesa_cmd->sessionId = cesa_ocf_cur_ses->frag_wa_encrypt;
+			}
+			else {
+				printk("%s,%d: Unsupporterd fragment wa mode \n", __FILE__, __LINE__);
+            			goto p_error;
+			}
+
+			/* send the 2 actions to the HAL */
+			spin_lock_irqsave(&cesa_lock, flags);
+			status = mvCesaAction(cesa_cmd_wa);
+			spin_unlock_irqrestore(&cesa_lock, flags);
+
+			if((status != MV_NO_MORE) && (status != MV_OK)) {
+				printk("%s,%d: cesa action failed, status = 0x%x\n", __FILE__, __LINE__, status);
+				goto p_error;
+			}
+			spin_lock_irqsave(&cesa_lock, flags);
+			status = mvCesaAction(cesa_cmd);
+			spin_unlock_irqrestore(&cesa_lock, flags);
+
+		}
+		/* action not allowed and can't split */
+		else 
+#endif
+		{
+			goto p_error;
+		}
+	}
+
+	/* Hal Q is full, send again. This should never happen */
+	if(status == MV_NO_RESOURCE) {
+		printk("%s,%d: cesa no more resources \n", __FILE__, __LINE__);
+		if(cesa_ocf_cmd)
+			kfree(cesa_ocf_cmd);
+		if(cesa_ocf_cmd_wa)
+			kfree(cesa_ocf_cmd_wa);
+		return ERESTART;
+	} 
+	else if((status != MV_NO_MORE) && (status != MV_OK)) {
+                printk("%s,%d: cesa action failed, status = 0x%x\n", __FILE__, __LINE__, status);
+		goto p_error;
+        }
+
+
+#ifdef CESA_OCF_POLLING
+	cesa_interrupt_polling();
+#endif
+	cesaTestTraceAdd(5);
+
+	return 0;
+p_error:
+	crp->crp_etype = EINVAL;
+	if(cesa_ocf_cmd)
+		kfree(cesa_ocf_cmd);
+	if(cesa_ocf_cmd_wa)
+		kfree(cesa_ocf_cmd_wa);
+       	return EINVAL;
+}
+
+/*
+ * cesa callback. 
+ */
+static void
+cesa_callback(unsigned long dummy)
+{
+	struct cesa_ocf_process *cesa_ocf_cmd = NULL;
+	struct cryptop 		*crp = NULL;
+	MV_CESA_RESULT  	result[MV_CESA_MAX_CHAN];
+	int 			res_idx = 0,i;
+	MV_STATUS               status;
+
+	dprintk("%s()\n", __FUNCTION__);
+
+#ifdef CESA_OCF_TASKLET
+	disable_irq(cesa_device.irq);
+#endif
+    while(MV_TRUE) {
+	
+		 /* Get Ready requests */
+		spin_lock(&cesa_lock);
+		status = mvCesaReadyGet(&result[res_idx]);
+		spin_unlock(&cesa_lock);
+
+	        cesaTestTraceAdd(2);	
+
+		    if(status != MV_OK) {
+#ifdef CESA_OCF_POLLING
+		        if(status == MV_BUSY) { /* Fragment */
+			        cesa_interrupt_polling();
+			        return;
+		        }
+#endif
+	    	    break;
+    	    }
+	        res_idx++;
+		    break;
+	    }
+	
+	for(i = 0; i < res_idx; i++) {
+
+		if(!result[i].pReqPrv) {
+			printk("%s,%d: warning private is NULL\n", __FILE__, __LINE__);
+			break;
+		}
+
+		cesa_ocf_cmd = result[i].pReqPrv;
+		crp = cesa_ocf_cmd->crp; 
+
+		// ignore HMAC error.
+		//if(result->retCode)
+		//	crp->crp_etype = EIO;	
+	
+#if  defined(CESA_OCF_POLLING) 
+		if(!cesa_ocf_cmd->need_cb){
+			cesa_interrupt_polling();
+		}	
+#endif
+		if(cesa_ocf_cmd->need_cb) {
+			if(debug) {
+				mvCesaDebugMbuf("DST BUFFER", cesa_ocf_cmd->cesa_cmd.pDst, 0, cesa_ocf_cmd->cesa_cmd.pDst->mbufSize);
+			}
+			crypto_done(crp);
+		}
+		kfree(cesa_ocf_cmd);
+    	}
+#ifdef CESA_OCF_TASKLET
+	enable_irq(cesa_device.irq);
+#endif
+
+	cesaTestTraceAdd(3);
+
+	return;
+}
+
+#ifdef CESA_OCF_POLLING
+static void
+cesa_interrupt_polling(void)
+{
+        u32                  	cause;
+
+	dprintk("%s()\n", __FUNCTION__);
+
+  	/* Read cause register */
+	do {
+		cause = MV_REG_READ(MV_CESA_ISR_CAUSE_REG);
+		cause &= MV_CESA_CAUSE_ACC_DMA_ALL_MASK;
+
+	} while (cause == 0);
+		
+	/* clear interrupts */
+    	MV_REG_WRITE(MV_CESA_ISR_CAUSE_REG, 0);
+
+	cesa_callback(0);
+
+	return;
+}
+
+#endif
+
+/*
+ * cesa Interrupt polling routine.
+ */
+static irqreturn_t
+cesa_interrupt_handler(int irq, void *arg)
+{
+        u32                  	cause;
+
+	dprintk("%s()\n", __FUNCTION__);
+
+	cesaTestTraceAdd(0);
+
+  	/* Read cause register */
+	cause = MV_REG_READ(MV_CESA_ISR_CAUSE_REG);
+
+    	if( (cause & MV_CESA_CAUSE_ACC_DMA_ALL_MASK) == 0)
+    	{
+        /* Empty interrupt */
+		dprintk("%s,%d: cesaTestReadyIsr: cause=0x%x\n", __FILE__, __LINE__, cause);
+        	return IRQ_HANDLED;
+    	}
+	
+	/* clear interrupts */
+    	MV_REG_WRITE(MV_CESA_ISR_CAUSE_REG, 0);
+
+	cesaTestTraceAdd(1);
+#ifdef CESA_OCF_TASKLET	
+	tasklet_hi_schedule(&cesa_ocf_tasklet);
+#else
+	cesa_callback(0);
+#endif
+	return IRQ_HANDLED;
+}
+
+/*
+ * Open a session.
+ */
+static int 
+/*cesa_ocf_newsession(void *arg, u_int32_t *sid, struct cryptoini *cri)*/
+cesa_ocf_newsession(device_t dev, u_int32_t *sid, struct cryptoini *cri)
+{
+	u32 status = 0, i;
+	u32 count = 0, auth = 0, encrypt =0;
+	struct cesa_ocf_data *cesa_ocf_cur_ses;
+	MV_CESA_OPEN_SESSION cesa_session;
+	MV_CESA_OPEN_SESSION *cesa_ses = &cesa_session;
+
+
+        dprintk("%s()\n", __FUNCTION__);
+        if (sid == NULL || cri == NULL) {
+                printk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+                return EINVAL;
+        }
+
+	/* leave first empty like in other implementations */
+        for (i = 1; i < CESA_OCF_MAX_SES; i++) {
+       		if (cesa_ocf_sessions[i] == NULL)
+               		break;
+	}
+
+	if(i >= CESA_OCF_MAX_SES) {
+		printk("%s,%d: no more sessions \n", __FILE__, __LINE__);
+                return EINVAL;
+	}
+
+        cesa_ocf_sessions[i] = (struct cesa_ocf_data *) kmalloc(sizeof(struct cesa_ocf_data), GFP_ATOMIC);
+        if (cesa_ocf_sessions[i] == NULL) {
+                cesa_ocf_freesession(NULL, i);
+                printk("%s,%d: ENOBUFS \n", __FILE__, __LINE__);
+                return ENOBUFS;
+        }
+	dprintk("%s,%d: new session %d \n", __FILE__, __LINE__, i);
+	
+        *sid = i;
+        cesa_ocf_cur_ses = cesa_ocf_sessions[i];
+        memset(cesa_ocf_cur_ses, 0, sizeof(struct cesa_ocf_data));
+	cesa_ocf_cur_ses->sid_encrypt = -1;
+	cesa_ocf_cur_ses->sid_decrypt = -1;
+	cesa_ocf_cur_ses->frag_wa_encrypt = -1;
+	cesa_ocf_cur_ses->frag_wa_decrypt = -1;
+	cesa_ocf_cur_ses->frag_wa_auth = -1;
+
+	/* init the session */	
+	memset(cesa_ses, 0, sizeof(MV_CESA_OPEN_SESSION));
+	count = 1;
+        while (cri) {	
+		if(count > 2) {
+        		printk("%s,%d: don't support more then 2 operations\n", __FILE__, __LINE__);
+        		goto error;
+		}
+                switch (cri->cri_alg) {
+		case CRYPTO_AES_CBC:
+			dprintk("%s,%d: (%d) AES CBC \n", __FILE__, __LINE__, count);
+			cesa_ocf_cur_ses->cipher_alg = cri->cri_alg;
+			cesa_ocf_cur_ses->ivlen = MV_CESA_AES_BLOCK_SIZE;
+			cesa_ses->cryptoAlgorithm = MV_CESA_CRYPTO_AES;
+			cesa_ses->cryptoMode = MV_CESA_CRYPTO_CBC;
+			if(cri->cri_klen/8 > MV_CESA_MAX_CRYPTO_KEY_LENGTH) {
+        			printk("%s,%d: CRYPTO key too long.\n", __FILE__, __LINE__);
+        			goto error;
+			}
+			memcpy(cesa_ses->cryptoKey, cri->cri_key, cri->cri_klen/8);
+			dprintk("%s,%d: key length %d \n", __FILE__, __LINE__, cri->cri_klen/8);
+			cesa_ses->cryptoKeyLength = cri->cri_klen/8;
+			encrypt += count;
+			break;
+                case CRYPTO_3DES_CBC:
+			dprintk("%s,%d: (%d) 3DES CBC \n", __FILE__, __LINE__, count);
+			cesa_ocf_cur_ses->cipher_alg = cri->cri_alg;
+			cesa_ocf_cur_ses->ivlen = MV_CESA_3DES_BLOCK_SIZE;
+			cesa_ses->cryptoAlgorithm = MV_CESA_CRYPTO_3DES;
+			cesa_ses->cryptoMode = MV_CESA_CRYPTO_CBC;
+			if(cri->cri_klen/8 > MV_CESA_MAX_CRYPTO_KEY_LENGTH) {
+        			printk("%s,%d: CRYPTO key too long.\n", __FILE__, __LINE__);
+        			goto error;
+			}
+			memcpy(cesa_ses->cryptoKey, cri->cri_key, cri->cri_klen/8);
+			cesa_ses->cryptoKeyLength = cri->cri_klen/8;
+			encrypt += count;
+			break;
+                case CRYPTO_DES_CBC:
+			dprintk("%s,%d: (%d) DES CBC \n", __FILE__, __LINE__, count);
+			cesa_ocf_cur_ses->cipher_alg = cri->cri_alg;
+			cesa_ocf_cur_ses->ivlen = MV_CESA_DES_BLOCK_SIZE;
+			cesa_ses->cryptoAlgorithm = MV_CESA_CRYPTO_DES;
+			cesa_ses->cryptoMode = MV_CESA_CRYPTO_CBC;
+			if(cri->cri_klen/8 > MV_CESA_MAX_CRYPTO_KEY_LENGTH) {
+        			printk("%s,%d: CRYPTO key too long.\n", __FILE__, __LINE__);
+        			goto error;
+			}
+			memcpy(cesa_ses->cryptoKey, cri->cri_key, cri->cri_klen/8);
+			cesa_ses->cryptoKeyLength = cri->cri_klen/8;
+			encrypt += count;
+			break;
+                case CRYPTO_MD5:
+                case CRYPTO_MD5_HMAC:
+			dprintk("%s,%d: (%d) %sMD5 CBC \n", __FILE__, __LINE__, count, (cri->cri_alg != CRYPTO_MD5)? "H-":" ");
+                        cesa_ocf_cur_ses->auth_alg = cri->cri_alg;
+			cesa_ocf_cur_ses->digestlen = (cri->cri_alg == CRYPTO_MD5)? MV_CESA_MD5_DIGEST_SIZE : 12;
+			cesa_ses->macMode = (cri->cri_alg == CRYPTO_MD5)? MV_CESA_MAC_MD5 : MV_CESA_MAC_HMAC_MD5;
+			if(cri->cri_klen/8 > MV_CESA_MAX_CRYPTO_KEY_LENGTH) {
+        			printk("%s,%d: MAC key too long. \n", __FILE__, __LINE__);
+        			goto error;
+			}
+			cesa_ses->macKeyLength = cri->cri_klen/8;
+			memcpy(cesa_ses->macKey, cri->cri_key, cri->cri_klen/8);
+			cesa_ses->digestSize = cesa_ocf_cur_ses->digestlen; 
+			auth += count;
+			break;
+                case CRYPTO_SHA1:
+                case CRYPTO_SHA1_HMAC:
+			dprintk("%s,%d: (%d) %sSHA1 CBC \n", __FILE__, __LINE__, count, (cri->cri_alg != CRYPTO_SHA1)? "H-":" ");
+                        cesa_ocf_cur_ses->auth_alg = cri->cri_alg;
+			cesa_ocf_cur_ses->digestlen = (cri->cri_alg == CRYPTO_SHA1)? MV_CESA_SHA1_DIGEST_SIZE : 12; 
+			cesa_ses->macMode = (cri->cri_alg == CRYPTO_SHA1)? MV_CESA_MAC_SHA1 : MV_CESA_MAC_HMAC_SHA1;
+			if(cri->cri_klen/8 > MV_CESA_MAX_CRYPTO_KEY_LENGTH) {
+        			printk("%s,%d: MAC key too long. \n", __FILE__, __LINE__);
+        			goto error;
+			}
+			cesa_ses->macKeyLength = cri->cri_klen/8;
+			memcpy(cesa_ses->macKey, cri->cri_key, cri->cri_klen/8);
+			cesa_ses->digestSize = cesa_ocf_cur_ses->digestlen;
+			auth += count;
+			break;
+                default:
+                        printk("%s,%d: unknown algo 0x%x\n", __FILE__, __LINE__, cri->cri_alg);
+                        goto error;
+                }
+                cri = cri->cri_next;
+		count++;
+        }
+
+	if((encrypt > 2) || (auth > 2)) {
+		printk("%s,%d: session mode is not supported.\n", __FILE__, __LINE__);
+                goto error;
+	}
+	/* create new sessions in HAL */
+	if(encrypt) {
+		cesa_ses->operation = MV_CESA_CRYPTO_ONLY;
+		/* encrypt session */
+		if(auth == 1) {
+			cesa_ses->operation = MV_CESA_MAC_THEN_CRYPTO;
+		}
+		else if(auth == 2) {
+			cesa_ses->operation = MV_CESA_CRYPTO_THEN_MAC;
+			cesa_ocf_cur_ses->encrypt_tn_auth = 1;
+		}
+		else {
+			cesa_ses->operation = MV_CESA_CRYPTO_ONLY;
+		}
+		cesa_ses->direction = MV_CESA_DIR_ENCODE;
+		status = mvCesaSessionOpen(cesa_ses, &cesa_ocf_cur_ses->sid_encrypt);
+    		if(status != MV_OK) {
+        		printk("%s,%d: Can't open new session - status = 0x%x\n", __FILE__, __LINE__, status);
+        		goto error;
+    		}	
+		/* decrypt session */
+		if( cesa_ses->operation == MV_CESA_MAC_THEN_CRYPTO ) {
+			cesa_ses->operation = MV_CESA_CRYPTO_THEN_MAC;
+		}
+		else if( cesa_ses->operation == MV_CESA_CRYPTO_THEN_MAC ) {
+			cesa_ses->operation = MV_CESA_MAC_THEN_CRYPTO;
+		}
+		cesa_ses->direction = MV_CESA_DIR_DECODE;
+		status = mvCesaSessionOpen(cesa_ses, &cesa_ocf_cur_ses->sid_decrypt);
+		if(status != MV_OK) {
+        		printk("%s,%d: Can't open new session - status = 0x%x\n", __FILE__, __LINE__, status);
+        		goto error;
+    		}
+
+		/* preapre one action sessions for case we will need to split an action */
+#ifdef CESA_OCF_SPLIT
+		if(( cesa_ses->operation == MV_CESA_MAC_THEN_CRYPTO ) || 
+			( cesa_ses->operation == MV_CESA_CRYPTO_THEN_MAC )) {
+			/* open one session for encode and one for decode */
+			cesa_ses->operation = MV_CESA_CRYPTO_ONLY;
+			cesa_ses->direction = MV_CESA_DIR_ENCODE;
+			status = mvCesaSessionOpen(cesa_ses, &cesa_ocf_cur_ses->frag_wa_encrypt);
+    			if(status != MV_OK) {
+        			printk("%s,%d: Can't open new session - status = 0x%x\n", __FILE__, __LINE__, status);
+        			goto error;
+    			}
+
+			cesa_ses->direction = MV_CESA_DIR_DECODE;
+			status = mvCesaSessionOpen(cesa_ses, &cesa_ocf_cur_ses->frag_wa_decrypt);
+    			if(status != MV_OK) {
+        			printk("%s,%d: Can't open new session - status = 0x%x\n", __FILE__, __LINE__, status);
+        			goto error;
+    			}
+			/* open one session for auth */	
+			cesa_ses->operation = MV_CESA_MAC_ONLY;
+			cesa_ses->direction = MV_CESA_DIR_ENCODE;
+			status = mvCesaSessionOpen(cesa_ses, &cesa_ocf_cur_ses->frag_wa_auth);
+			if(status != MV_OK) {
+        			printk("%s,%d: Can't open new session - status = 0x%x\n", __FILE__, __LINE__, status);
+				goto error;
+    			}
+		}
+#endif
+	}
+	else { /* only auth */
+		cesa_ses->operation = MV_CESA_MAC_ONLY;
+		cesa_ses->direction = MV_CESA_DIR_ENCODE;
+        	status = mvCesaSessionOpen(cesa_ses, &cesa_ocf_cur_ses->sid_encrypt);
+		if(status != MV_OK) {
+        		printk("%s,%d: Can't open new session - status = 0x%x\n", __FILE__, __LINE__, status);
+			goto error;
+    		}
+	}
+	
+        return 0;
+error:
+     	cesa_ocf_freesession(NULL, *sid);
+      	return EINVAL;	
+
+}
+
+
+/*
+ * Free a session.
+ */
+static int
+cesa_ocf_freesession(device_t dev, u_int64_t tid)
+{
+        struct cesa_ocf_data *cesa_ocf_cur_ses;
+        u_int32_t sid = CRYPTO_SESID2LID(tid);
+	//unsigned long flags;
+
+        dprintk("%s() %d \n", __FUNCTION__, sid);
+        if ( (sid >= CESA_OCF_MAX_SES) || (cesa_ocf_sessions[sid] == NULL) ) {
+                printk("%s,%d: EINVAL can't free session %d \n", __FILE__, __LINE__, sid);
+                return(EINVAL);
+        }
+
+        /* Silently accept and return */
+        if (sid == 0)
+                return(0);
+
+	/* release session from HAL */
+	cesa_ocf_cur_ses = cesa_ocf_sessions[sid];
+     	if (cesa_ocf_cur_ses->sid_encrypt != -1) {
+		mvCesaSessionClose(cesa_ocf_cur_ses->sid_encrypt);
+	}
+	if (cesa_ocf_cur_ses->sid_decrypt != -1) {
+		mvCesaSessionClose(cesa_ocf_cur_ses->sid_decrypt);
+	}
+     	if (cesa_ocf_cur_ses->frag_wa_encrypt != -1) {
+		mvCesaSessionClose(cesa_ocf_cur_ses->frag_wa_encrypt);
+	}
+	if (cesa_ocf_cur_ses->frag_wa_decrypt != -1) {
+		mvCesaSessionClose(cesa_ocf_cur_ses->frag_wa_decrypt);
+	}
+	if (cesa_ocf_cur_ses->frag_wa_auth != -1) {
+		mvCesaSessionClose(cesa_ocf_cur_ses->frag_wa_auth);
+	}
+
+      	kfree(cesa_ocf_cur_ses);
+	cesa_ocf_sessions[sid] = NULL;
+
+        return 0;
+}
+
+
+/* TDMA Window setup */
+
+static void __init
+setup_tdma_mbus_windows(struct cesa_dev *dev)
+{
+    int i;
+    
+    for (i = 0; i < 4; i++) {
+        writel(0, dev->reg + WINDOW_BASE(i));
+        writel(0, dev->reg + WINDOW_CTRL(i));
+    }
+    
+    for (i = 0; i < dev->plat_data->dram->num_cs; i++) {
+        struct mbus_dram_window *cs = dev->plat_data->dram->cs + i;
+        writel(
+            ((cs->size - 1) & 0xffff0000) |
+            (cs->mbus_attr << 8) |
+            (dev->plat_data->dram->mbus_dram_target_id << 4) | 1,
+            dev->reg + WINDOW_CTRL(i)
+        );
+        writel(cs->base, dev->reg + WINDOW_BASE(i));
+    }
+}
+                                        
+/*
+ * our driver startup and shutdown routines
+ */
+static int
+mv_cesa_ocf_init(struct platform_device *pdev)
+{
+#if defined(CONFIG_MV78200) || defined(CONFIG_MV632X)
+	if (MV_FALSE == mvSocUnitIsMappedToThisCpu(CESA))
+	{
+		dprintk("CESA is not mapped to this CPU\n");
+		return -ENODEV;
+	}		
+#endif
+
+	dprintk("%s\n", __FUNCTION__);
+	memset(&mv_cesa_dev, 0, sizeof(mv_cesa_dev));
+	softc_device_init(&mv_cesa_dev, "MV CESA", 0, mv_cesa_methods);
+	cesa_ocf_id = crypto_get_driverid(softc_get_device(&mv_cesa_dev),CRYPTOCAP_F_HARDWARE);
+
+	if (cesa_ocf_id < 0)
+		panic("MV CESA crypto device cannot initialize!");
+
+	dprintk("%s,%d: cesa ocf device id is %d \n", __FILE__, __LINE__, cesa_ocf_id);
+
+	/* CESA unit is auto power on off */
+#if 0
+	if (MV_FALSE == mvCtrlPwrClckGet(CESA_UNIT_ID,0))
+	{
+		printk("\nWarning CESA %d is Powered Off\n",0);
+		return EINVAL;
+	}
+#endif
+
+	memset(&cesa_device, 0, sizeof(struct cesa_dev));
+	/* Get the IRQ, and crypto memory regions */
+	{
+		struct resource *res;
+		res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sram");
+		
+		if (!res)
+			return -ENXIO;
+		
+		cesa_device.sram = ioremap(res->start, res->end - res->start + 1);
+		res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+		
+		if (!res) {
+		        iounmap(cesa_device.sram);
+			return -ENXIO;
+                }
+                cesa_device.reg = ioremap(res->start, res->end - res->start + 1);
+		cesa_device.irq = platform_get_irq(pdev, 0);
+		cesa_device.plat_data = pdev->dev.platform_data;
+	        setup_tdma_mbus_windows(&cesa_device);	
+		
+	}
+	
+	
+	if( MV_OK != mvCesaInit(CESA_OCF_MAX_SES*5, CESA_Q_SIZE, cesa_device.reg,
+				NULL) ) {
+            	printk("%s,%d: mvCesaInit Failed. \n", __FILE__, __LINE__);
+		return EINVAL;
+	}
+
+	/* clear and unmask Int */
+	MV_REG_WRITE( MV_CESA_ISR_CAUSE_REG, 0);
+#ifndef CESA_OCF_POLLING
+    MV_REG_WRITE( MV_CESA_ISR_MASK_REG, MV_CESA_CAUSE_ACC_DMA_MASK);
+#endif
+#ifdef CESA_OCF_TASKLET
+	tasklet_init(&cesa_ocf_tasklet, cesa_callback, (unsigned int) 0);
+#endif
+	/* register interrupt */
+	if( request_irq( cesa_device.irq, cesa_interrupt_handler,
+                             (IRQF_DISABLED) , "cesa", &cesa_ocf_id) < 0) {
+            	printk("%s,%d: cannot assign irq %x\n", __FILE__, __LINE__, cesa_device.reg);
+		return EINVAL;
+        }
+
+
+	memset(cesa_ocf_sessions, 0, sizeof(struct cesa_ocf_data *) * CESA_OCF_MAX_SES);
+
+#define	REGISTER(alg) \
+	crypto_register(cesa_ocf_id, alg, 0,0)
+	REGISTER(CRYPTO_AES_CBC);
+	REGISTER(CRYPTO_DES_CBC);
+	REGISTER(CRYPTO_3DES_CBC);
+	REGISTER(CRYPTO_MD5);
+	REGISTER(CRYPTO_MD5_HMAC);
+	REGISTER(CRYPTO_SHA1);
+	REGISTER(CRYPTO_SHA1_HMAC);
+#undef REGISTER
+
+	return 0;
+}
+
+static void
+mv_cesa_ocf_exit(struct platform_device *pdev)
+{
+	dprintk("%s()\n", __FUNCTION__);
+
+	crypto_unregister_all(cesa_ocf_id);
+	cesa_ocf_id = -1;
+	iounmap(cesa_device.reg);
+	iounmap(cesa_device.sram);
+	free_irq(cesa_device.irq, NULL);
+	
+	/* mask and clear Int */
+	MV_REG_WRITE( MV_CESA_ISR_MASK_REG, 0);
+	MV_REG_WRITE( MV_CESA_ISR_CAUSE_REG, 0);
+    	
+
+	if( MV_OK != mvCesaFinish() ) {
+            	printk("%s,%d: mvCesaFinish Failed. \n", __FILE__, __LINE__);
+		return;
+	}
+}
+
+
+void cesa_ocf_debug(void)
+{
+
+#ifdef CESA_OCF_TRACE_DEBUG
+    {
+        int i, j;
+        j = cesaTestTraceIdx;
+        mvOsPrintf("No  Type   rCause   iCause   Proc   Isr   Res     Time     pReady    pProc    pEmpty\n");
+        for(i=0; i<MV_CESA_TEST_TRACE_SIZE; i++)
+        {
+            mvOsPrintf("%02d.  %d   0x%04x   0x%04x   0x%02x   0x%02x   %02d   0x%06x  %p  %p  %p\n",
+                j, cesaTestTrace[j].type, cesaTestTrace[j].realCause,
+                cesaTestTrace[j].idmaCause, 
+                cesaTestTrace[j].resources, cesaTestTrace[j].timeStamp,
+                cesaTestTrace[j].pReqReady, cesaTestTrace[j].pReqProcess, cesaTestTrace[j].pReqEmpty);
+            j++;
+            if(j == MV_CESA_TEST_TRACE_SIZE)
+                j = 0;
+        }
+    }
+#endif
+
+}
+
+static struct platform_driver marvell_cesa = {
+	.probe		= mv_cesa_ocf_init,
+	.remove		= mv_cesa_ocf_exit,
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= "mv_crypto",
+	},
+};
+
+MODULE_ALIAS("platform:mv_crypto");
+
+static int __init mv_cesa_init(void)
+{
+	return platform_driver_register(&marvell_cesa);
+}
+
+module_init(mv_cesa_init);
+
+static void __exit mv_cesa_exit(void)
+{
+	platform_driver_unregister(&marvell_cesa);
+}
+
+module_exit(mv_cesa_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ronen Shitrit");
+MODULE_DESCRIPTION("OCF module for Orion CESA crypto");
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mv802_3.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mv802_3.h
new file mode 100644
index 0000000000..3769dde2fd
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mv802_3.h
@@ -0,0 +1,213 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmv802_3h
+#define __INCmv802_3h
+
+
+/* includes */
+#include "mvTypes.h"
+
+/* Defines */
+#define MV_MAX_ETH_DATA     1500
+
+/* 802.3 types */
+#define MV_IP_TYPE                  0x0800
+#define MV_IP_ARP_TYPE              0x0806
+#define MV_APPLE_TALK_ARP_TYPE      0x80F3
+#define MV_NOVELL_IPX_TYPE          0x8137
+#define MV_EAPOL_TYPE				0x888e
+
+
+
+/* Encapsulation header for RFC1042 and Ethernet_tunnel */
+
+#define MV_RFC1042_SNAP_HEADER     {0xAA, 0xAA, 0x03, 0x00, 0x00, 0x00}
+
+#define MV_ETH_SNAP_LSB             0xF8
+
+
+#define	MV_MAC_ADDR_SIZE	(6)
+#define MV_MAC_STR_SIZE		(20)
+#define MV_VLAN_HLEN		(4)
+
+/* This macro checks for a multicast mac address    */
+#define MV_IS_MULTICAST_MAC(mac)  (((mac)[0] & 0x1) == 1)
+
+
+/* This macro checks for an broadcast mac address     */
+#define MV_IS_BROADCAST_MAC(mac)            \
+       (((mac)[0] == 0xFF) &&       \
+        ((mac)[1] == 0xFF) &&       \
+        ((mac)[2] == 0xFF) &&       \
+        ((mac)[3] == 0xFF) &&       \
+        ((mac)[4] == 0xFF) &&       \
+        ((mac)[5] == 0xFF))
+
+
+/* Typedefs */
+typedef struct
+{
+    MV_U8     pDA[MV_MAC_ADDR_SIZE];
+    MV_U8     pSA[MV_MAC_ADDR_SIZE];
+    MV_U16    typeOrLen;
+
+} MV_802_3_HEADER;
+
+enum {
+  MV_IP_PROTO_NULL	= 0,    /* Dummy protocol for TCP               */
+  MV_IP_PROTO_ICMP	= 1,    /* Internet Control Message Protocol    */
+  MV_IP_PROTO_IGMP	= 2,    /* Internet Group Management Protocol   */
+  MV_IP_PROTO_IPIP	= 4,    /* IPIP tunnels (older KA9Q tunnels use 94) */
+  MV_IP_PROTO_TCP	= 6,    /* Transmission Control Protocol        */
+  MV_IP_PROTO_EGP	= 8,    /* Exterior Gateway Protocol            */
+  MV_IP_PROTO_PUP	= 12,   /* PUP protocol                         */
+  MV_IP_PROTO_UDP	= 17,   /* User Datagram Protocol               */
+  MV_IP_PROTO_IDP	= 22,   /* XNS IDP protocol                     */
+  MV_IP_PROTO_DCCP	= 33,   /* Datagram Congestion Control Protocol */
+  MV_IP_PROTO_IPV6	= 41,   /* IPv6-in-IPv4 tunnelling              */
+  MV_IP_PROTO_RSVP	= 46,   /* RSVP protocol                        */
+  MV_IP_PROTO_GRE	= 47,   /* Cisco GRE tunnels (rfc 1701,1702)    */
+  MV_IP_PROTO_ESP	= 50,   /* Encapsulation Security Payload protocol */
+  MV_IP_PROTO_AH	= 51,   /* Authentication Header protocol       */
+  MV_IP_PROTO_BEETPH	= 94,   /* IP option pseudo header for BEET     */
+  MV_IP_PROTO_PIM	= 103, 
+  MV_IP_PROTO_COMP	= 108,  /* Compression Header protocol          */
+  MV_IP_PROTO_ZERO_HOP	= 114,  /* Any 0 hop protocol (IANA)            */
+  MV_IP_PROTO_SCTP	= 132,  /* Stream Control Transport Protocol    */
+  MV_IP_PROTO_UDPLITE	= 136,  /* UDP-Lite (RFC 3828)                  */
+
+  MV_IP_PROTO_RAW	= 255,  /* Raw IP packets                       */
+  MV_IP_PROTO_MAX
+};
+
+typedef struct
+{
+    MV_U8   version;
+    MV_U8   tos;
+    MV_U16  totalLength;
+    MV_U16  identifier;
+    MV_U16  fragmentCtrl;
+    MV_U8   ttl;
+    MV_U8   protocol;
+    MV_U16  checksum;
+    MV_U32  srcIP;
+    MV_U32  dstIP;
+
+} MV_IP_HEADER; 
+
+typedef struct
+{       
+    MV_U32 spi;
+    MV_U32 seqNum;
+} MV_ESP_HEADER; 
+
+#define MV_ICMP_ECHOREPLY          0       /* Echo Reply                   */
+#define MV_ICMP_DEST_UNREACH       3       /* Destination Unreachable      */
+#define MV_ICMP_SOURCE_QUENCH      4       /* Source Quench                */
+#define MV_ICMP_REDIRECT           5       /* Redirect (change route)      */
+#define MV_ICMP_ECHO               8       /* Echo Request                 */
+#define MV_ICMP_TIME_EXCEEDED      11      /* Time Exceeded                */
+#define MV_ICMP_PARAMETERPROB      12      /* Parameter Problem            */
+#define MV_ICMP_TIMESTAMP          13      /* Timestamp Request            */
+#define MV_ICMP_TIMESTAMPREPLY     14      /* Timestamp Reply              */
+#define MV_ICMP_INFO_REQUEST       15      /* Information Request          */
+#define MV_ICMP_INFO_REPLY         16      /* Information Reply            */
+#define MV_ICMP_ADDRESS            17      /* Address Mask Request         */
+#define MV_ICMP_ADDRESSREPLY       18      /* Address Mask Reply           */
+
+typedef struct
+{
+    MV_U8   type;
+    MV_U8   code;
+    MV_U16  checksum;
+    MV_U16  id;
+    MV_U16  sequence;
+
+} MV_ICMP_ECHO_HEADER;
+
+typedef struct
+{
+    MV_U16  source;
+    MV_U16  dest;
+    MV_U32  seq;
+    MV_U32  ack_seq;
+    MV_U16  flags;
+    MV_U16  window;
+    MV_U16  chksum;
+    MV_U16  urg_offset;
+
+} MV_TCP_HEADER;
+
+typedef struct
+{
+    MV_U16  source;
+    MV_U16  dest;
+    MV_U16  len;
+    MV_U16  check;
+
+} MV_UDP_HEADER;
+
+#endif /* __INCmv802_3h */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvCommon.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvCommon.c
new file mode 100644
index 0000000000..dc0e0cfc45
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvCommon.c
@@ -0,0 +1,277 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "mvOs.h"
+#include "mv802_3.h"
+#include "mvCommon.h"
+
+
+/*******************************************************************************
+* mvMacStrToHex - Convert MAC format string to hex.
+*
+* DESCRIPTION:
+*		This function convert MAC format string to hex.
+*
+* INPUT:
+*       macStr - MAC address string. Fornat of address string is 
+*                uu:vv:ww:xx:yy:zz, where ":" can be any delimiter.
+*
+* OUTPUT:
+*       macHex - MAC in hex format.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+MV_STATUS mvMacStrToHex(const char* macStr, MV_U8* macHex)
+{
+    int i;
+    char tmp[3];
+
+    for(i = 0; i < MV_MAC_ADDR_SIZE; i++)
+    {
+        tmp[0] = macStr[(i * 3) + 0];
+        tmp[1] = macStr[(i * 3) + 1];
+        tmp[2] = '\0';
+        macHex[i] = (MV_U8) (strtol(tmp, NULL, 16));
+    }
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvMacHexToStr - Convert MAC in hex format to string format.
+*
+* DESCRIPTION:
+*		This function convert MAC in hex format to string format.
+*
+* INPUT:
+*       macHex - MAC in hex format.
+*
+* OUTPUT:
+*       macStr - MAC address string. String format is uu:vv:ww:xx:yy:zz.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+MV_STATUS mvMacHexToStr(MV_U8* macHex, char* macStr)
+{
+	int i;
+
+    for(i = 0; i < MV_MAC_ADDR_SIZE; i++)
+    {
+        mvOsSPrintf(&macStr[i * 3], "%02x:", macHex[i]);
+    }
+    macStr[(i * 3) - 1] = '\0';
+
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvSizePrint - Print the given size with size unit description.
+*
+* DESCRIPTION:
+*		This function print the given size with size unit description.
+*       FOr example when size paramter is 0x180000, the function prints:
+*       "size 1MB+500KB"
+*
+* INPUT:
+*       size - Size in bytes.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+MV_VOID mvSizePrint(MV_U32 size)
+{
+    mvOsOutput("size ");
+
+    if(size >= _1G)
+    {
+        mvOsOutput("%3dGB ", size / _1G);
+        size %= _1G;
+        if(size)
+            mvOsOutput("+");
+    }
+    if(size >= _1M )
+    {
+        mvOsOutput("%3dMB ", size / _1M);
+        size %= _1M;
+        if(size)
+            mvOsOutput("+");
+    }
+    if(size >= _1K)
+    {
+        mvOsOutput("%3dKB ", size / _1K);
+        size %= _1K;
+        if(size)
+            mvOsOutput("+");
+    }
+    if(size > 0)
+    {
+        mvOsOutput("%3dB ", size);
+    }
+}
+
+/*******************************************************************************
+* mvHexToBin - Convert hex to binary
+*
+* DESCRIPTION:
+*		This function Convert hex to binary.
+*
+* INPUT:
+*       pHexStr - hex buffer pointer.
+*       size    - Size to convert.
+*
+* OUTPUT:
+*       pBin - Binary buffer pointer.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+MV_VOID mvHexToBin(const char* pHexStr, MV_U8* pBin, int size)
+{
+  	int     j, i;
+    char    tmp[3];
+    MV_U8   byte;
+    
+    for(j=0, i=0; j<size; j++, i+=2)
+    {
+        tmp[0] = pHexStr[i];
+        tmp[1] = pHexStr[i+1];
+        tmp[2] = '\0';
+        byte = (MV_U8) (strtol(tmp, NULL, 16) & 0xFF);
+        pBin[j] =  byte;     
+    }
+}
+
+void     mvAsciiToHex(const char* asciiStr, char* hexStr)
+{
+	int	i=0;
+
+	while(asciiStr[i] != 0)
+	{
+		mvOsSPrintf(&hexStr[i*2], "%02x", asciiStr[i]);
+		i++;
+	}
+	hexStr[i*2] = 0;
+}
+
+
+void    mvBinToHex(const MV_U8* bin, char* hexStr, int size)
+{
+	int i;
+
+    for(i=0; i<size; i++)
+    {
+        mvOsSPrintf(&hexStr[i*2], "%02x", bin[i]);
+    }
+    hexStr[i*2] = '\0';
+}
+
+void    mvBinToAscii(const MV_U8* bin, char* asciiStr, int size)
+{
+	int i;
+ 
+    for(i=0; i<size; i++)
+    {
+        mvOsSPrintf(&asciiStr[i*2], "%c", bin[i]);
+    }
+    asciiStr[i*2] = '\0';
+}
+
+/*******************************************************************************
+* mvLog2 - 
+*
+* DESCRIPTION:
+*	Calculate the Log2 of a given number.
+*
+* INPUT:
+*       num - A number to calculate the Log2 for.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       Log 2 of the input number, or 0xFFFFFFFF if input is 0.
+*
+*******************************************************************************/
+MV_U32 mvLog2(MV_U32	num)
+{
+	MV_U32 result = 0;
+	if(num == 0)
+		return 0xFFFFFFFF;
+	while(num != 1)
+	{
+		num = num >> 1;
+		result++;
+	}
+	return result;
+}
+
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvCommon.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvCommon.h
new file mode 100644
index 0000000000..c8e9ce1001
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvCommon.h
@@ -0,0 +1,308 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+
+#ifndef __INCmvCommonh
+#define __INCmvCommonh
+
+#include "mvTypes.h"
+
+/* Swap tool */
+
+/* 16bit nibble swap. For example 0x1234 -> 0x2143                          */
+#define MV_NIBBLE_SWAP_16BIT(X)    (((X&0xf) << 4) |     \
+                                    ((X&0xf0) >> 4) |    \
+                                    ((X&0xf00) << 4) |   \
+                                    ((X&0xf000) >> 4))
+        
+/* 32bit nibble swap. For example 0x12345678 -> 0x21436587                  */
+#define MV_NIBBLE_SWAP_32BIT(X)    (((X&0xf) << 4) |       \
+                                    ((X&0xf0) >> 4) |      \
+                                    ((X&0xf00) << 4) |     \
+                                    ((X&0xf000) >> 4) |    \
+                                    ((X&0xf0000) << 4) |   \
+                                    ((X&0xf00000) >> 4) |  \
+                                    ((X&0xf000000) << 4) | \
+                                    ((X&0xf0000000) >> 4))
+
+/* 16bit byte swap. For example 0x1122 -> 0x2211                            */
+#define MV_BYTE_SWAP_16BIT(X) ((((X)&0xff)<<8) | (((X)&0xff00)>>8))
+
+/* 32bit byte swap. For example 0x11223344 -> 0x44332211                    */
+#define MV_BYTE_SWAP_32BIT(X) ((((X)&0xff)<<24) |                       \
+                               (((X)&0xff00)<<8) |                      \
+                               (((X)&0xff0000)>>8) |                    \
+                               (((X)&0xff000000)>>24))
+
+/* 64bit byte swap. For example 0x11223344.55667788 -> 0x88776655.44332211  */
+#define MV_BYTE_SWAP_64BIT(X) ((l64) ((((X)&0xffULL)<<56) |             \
+                                      (((X)&0xff00ULL)<<40) |           \
+                                      (((X)&0xff0000ULL)<<24) |         \
+                                      (((X)&0xff000000ULL)<<8) |        \
+                                      (((X)&0xff00000000ULL)>>8) |      \
+                                      (((X)&0xff0000000000ULL)>>24) |   \
+                                      (((X)&0xff000000000000ULL)>>40) | \
+                                      (((X)&0xff00000000000000ULL)>>56)))
+
+/* Endianess macros.                                                        */
+#if defined(MV_CPU_LE)
+    #define MV_16BIT_LE(X)  (X) 
+    #define MV_32BIT_LE(X)  (X)
+    #define MV_64BIT_LE(X)  (X)
+    #define MV_16BIT_BE(X)  MV_BYTE_SWAP_16BIT(X)
+    #define MV_32BIT_BE(X)  MV_BYTE_SWAP_32BIT(X)
+    #define MV_64BIT_BE(X)  MV_BYTE_SWAP_64BIT(X)
+#elif defined(MV_CPU_BE)
+    #define MV_16BIT_LE(X)  MV_BYTE_SWAP_16BIT(X) 
+    #define MV_32BIT_LE(X)  MV_BYTE_SWAP_32BIT(X)
+    #define MV_64BIT_LE(X)  MV_BYTE_SWAP_64BIT(X)
+    #define MV_16BIT_BE(X)  (X)
+    #define MV_32BIT_BE(X)  (X)
+    #define MV_64BIT_BE(X)  (X)
+#else
+    #error "CPU endianess isn't defined!\n"
+#endif 
+
+
+/* Bit field definitions */
+#define NO_BIT      0x00000000
+#define BIT0        0x00000001
+#define BIT1        0x00000002
+#define BIT2        0x00000004
+#define BIT3        0x00000008
+#define BIT4        0x00000010
+#define BIT5        0x00000020
+#define BIT6        0x00000040
+#define BIT7        0x00000080
+#define BIT8        0x00000100
+#define BIT9        0x00000200
+#define BIT10       0x00000400
+#define BIT11       0x00000800
+#define BIT12       0x00001000
+#define BIT13       0x00002000
+#define BIT14       0x00004000
+#define BIT15       0x00008000
+#define BIT16       0x00010000
+#define BIT17       0x00020000
+#define BIT18       0x00040000
+#define BIT19       0x00080000
+#define BIT20       0x00100000
+#define BIT21       0x00200000
+#define BIT22       0x00400000
+#define BIT23       0x00800000
+#define BIT24       0x01000000
+#define BIT25       0x02000000
+#define BIT26       0x04000000
+#define BIT27       0x08000000
+#define BIT28       0x10000000
+#define BIT29       0x20000000
+#define BIT30       0x40000000
+#define BIT31       0x80000000
+
+/* Handy sizes */
+#define _1K         0x00000400
+#define _2K         0x00000800
+#define _4K         0x00001000
+#define _8K         0x00002000
+#define _16K        0x00004000
+#define _32K        0x00008000
+#define _64K        0x00010000
+#define _128K       0x00020000
+#define _256K       0x00040000
+#define _512K       0x00080000
+
+#define _1M         0x00100000
+#define _2M         0x00200000
+#define _4M         0x00400000
+#define _8M         0x00800000
+#define _16M        0x01000000
+#define _32M        0x02000000
+#define _64M        0x04000000
+#define _128M       0x08000000
+#define _256M       0x10000000
+#define _512M       0x20000000
+
+#define _1G         0x40000000
+#define _2G         0x80000000
+
+/* Tclock and Sys clock define */
+#define _100MHz     100000000
+#define _125MHz     125000000
+#define _133MHz     133333334
+#define _150MHz     150000000
+#define _160MHz     160000000
+#define _166MHz     166666667
+#define _175MHz     175000000
+#define _178MHz     178000000
+#define _183MHz     183333334
+#define _187MHz     187000000
+#define _192MHz     192000000
+#define _194MHz     194000000
+#define _200MHz     200000000
+#define _233MHz     233333334
+#define _250MHz     250000000
+#define _266MHz     266666667
+#define _300MHz     300000000
+
+/* For better address window table readability */
+#define EN			MV_TRUE
+#define DIS			MV_FALSE
+#define N_A			-1			/* Not applicable */
+
+/* Cache configuration options for memory (DRAM, SRAM, ... ) */
+
+/* Memory uncached, HW or SW cache coherency is not needed */
+#define MV_UNCACHED             0   
+/* Memory cached, HW cache coherency supported in WriteThrough mode */
+#define MV_CACHE_COHER_HW_WT    1
+/* Memory cached, HW cache coherency supported in WriteBack mode */
+#define MV_CACHE_COHER_HW_WB    2
+/* Memory cached, No HW cache coherency, Cache coherency must be in SW */
+#define MV_CACHE_COHER_SW       3
+
+               
+/* Macro for testing aligment. Positive if number is NOT aligned   */
+#define MV_IS_NOT_ALIGN(number, align)      ((number) & ((align) - 1))
+
+/* Macro for alignment up. For example, MV_ALIGN_UP(0x0330, 0x20) = 0x0340   */
+#define MV_ALIGN_UP(number, align)                                          \
+(((number) & ((align) - 1)) ? (((number) + (align)) & ~((align)-1)) : (number))
+
+/* Macro for alignment down. For example, MV_ALIGN_UP(0x0330, 0x20) = 0x0320 */
+#define MV_ALIGN_DOWN(number, align) ((number) & ~((align)-1))
+
+/* This macro returns absolute value                                        */
+#define MV_ABS(number)  (((int)(number) < 0) ? -(int)(number) : (int)(number))
+
+
+/* Bit fields manipulation macros                                           */
+
+/* An integer word which its 'x' bit is set                                 */
+#define MV_BIT_MASK(bitNum)         (1 << (bitNum) )     
+
+/* Checks wheter bit 'x' in integer word is set                             */
+#define MV_BIT_CHECK(word, bitNum)  ( (word) & MV_BIT_MASK(bitNum) )
+
+/* Clear (reset) bit 'x' in integer word (RMW - Read-Modify-Write)          */
+#define MV_BIT_CLEAR(word, bitNum)  ( (word) &= ~(MV_BIT_MASK(bitNum)) )
+
+/* Set bit 'x' in integer word (RMW)                                        */
+#define MV_BIT_SET(word, bitNum)    ( (word) |= MV_BIT_MASK(bitNum) )
+
+/* Invert bit 'x' in integer word (RMW)                                     */
+#define MV_BIT_INV(word, bitNum)    ( (word) ^= MV_BIT_MASK(bitNum) )
+
+/* Get the min between 'a' or 'b'                                           */
+#define MV_MIN(a,b)    (((a) < (b)) ? (a) : (b)) 
+
+/* Get the max between 'a' or 'b'                                           */
+#define MV_MAX(a,b)    (((a) < (b)) ? (b) : (a)) 
+
+/* Temporary */
+#define mvOsDivide(num, div)        \
+({                                  \
+    int i=0, rem=(num);             \
+                                    \
+    while(rem >= (div))             \
+    {                               \
+        rem -= (div);               \
+        i++;                        \
+    }                               \
+    (i);                            \
+})
+
+/* Temporary */
+#define mvOsReminder(num, div)      \
+({                                  \
+    int rem = (num);                \
+                                    \
+    while(rem >= (div))             \
+        rem -= (div);               \
+    (rem);                          \
+})
+
+#define MV_IP_QUAD(ipAddr)    ((ipAddr >> 24) & 0xFF), ((ipAddr >> 16) & 0xFF), \
+                              ((ipAddr >> 8) & 0xFF), ((ipAddr >> 0) & 0xFF)
+
+#define MV_IS_POWER_OF_2(num) ((num != 0) && ((num & (num - 1)) == 0))
+
+#ifndef MV_ASMLANGUAGE
+/* mvCommon API list */
+
+MV_VOID     mvHexToBin(const char* pHexStr, MV_U8* pBin, int size);
+void        mvAsciiToHex(const char* asciiStr, char* hexStr);
+void        mvBinToHex(const MV_U8* bin, char* hexStr, int size);
+void        mvBinToAscii(const MV_U8* bin, char* asciiStr, int size);
+
+MV_STATUS mvMacStrToHex(const char* macStr, MV_U8* macHex);
+MV_STATUS mvMacHexToStr(MV_U8* macHex, char* macStr);
+void        mvSizePrint(MV_U32);
+
+MV_U32 mvLog2(MV_U32 num);
+
+#endif /* MV_ASMLANGUAGE */
+
+
+#endif	/* __INCmvCommonh */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvDebug.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvDebug.c
new file mode 100644
index 0000000000..087f36d325
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvDebug.c
@@ -0,0 +1,326 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+
+/* includes */
+#include "mvOs.h"
+#include "mv802_3.h"
+#include "mvCommon.h"
+#include "mvDebug.h"
+
+/* Global variables effect on behave MV_DEBUG_PRINT and MV_DEBUG_CODE macros
+ * mvDebug  - map of bits (one for each module) bit=1 means enable 
+ *          debug code and messages for this module
+ * mvModuleDebug - array of 32 bits varables one for each module
+ */
+MV_U32    mvDebug = 0;
+MV_U32    mvDebugModules[MV_MODULE_MAX];
+ 
+/* Init mvModuleDebug array to default values */
+void    mvDebugInit(void)
+{
+    int     bit;
+
+    mvDebug = 0;
+    for(bit=0; bit<MV_MODULE_MAX; bit++)
+    {
+        mvDebugModules[bit] = MV_DEBUG_FLAG_ERR | MV_DEBUG_FLAG_STATS;
+        mvDebug |= MV_BIT_MASK(bit);
+    }
+}
+ 
+void    mvDebugModuleEnable(MV_MODULE_ID module, MV_BOOL isEnable)
+{    
+    if (isEnable)
+    {
+       MV_BIT_SET(mvDebug, module);               
+    }
+    else
+       MV_BIT_CLEAR(mvDebug, module);                   
+}
+ 
+void    mvDebugModuleSetFlags(MV_MODULE_ID module, MV_U32 flags)
+{ 
+    mvDebugModules[module] |= flags;
+}
+
+void    mvDebugModuleClearFlags(MV_MODULE_ID module, MV_U32 flags)
+{ 
+    mvDebugModules[module] &= ~flags;
+}
+
+/* Dump memory in specific format: 
+ * address: X1X1X1X1 X2X2X2X2 ... X8X8X8X8 
+ */
+void mvDebugMemDump(void* addr, int size, int access)
+{
+    int     i, j;
+    MV_U32  memAddr = (MV_U32)addr;
+
+    if(access == 0)
+        access = 1;
+
+    if( (access != 4) && (access != 2) && (access != 1) )
+    {
+        mvOsPrintf("%d wrong access size. Access must be 1 or 2 or 4\n",
+                    access);
+        return;
+    }
+    memAddr = MV_ALIGN_DOWN( (unsigned int)addr, 4);
+    size = MV_ALIGN_UP(size, 4);
+    addr = (void*)MV_ALIGN_DOWN( (unsigned int)addr, access);
+    while(size > 0)
+    {
+        mvOsPrintf("%08x: ", memAddr);
+        i = 0;
+        /* 32 bytes in the line */
+        while(i < 32)
+        {
+            if(memAddr >= (MV_U32)addr)
+            {
+                switch(access)
+                {
+                    case 1:
+                        if( memAddr == CPU_PHY_MEM(memAddr) )
+                        {
+                            mvOsPrintf("%02x ", MV_MEMIO8_READ(memAddr));
+                        }
+                        else
+                        {
+                            mvOsPrintf("%02x ", *((MV_U8*)memAddr));
+                        }
+                        break;
+
+                    case 2:
+                        if( memAddr == CPU_PHY_MEM(memAddr) )
+                        {
+                            mvOsPrintf("%04x ", MV_MEMIO16_READ(memAddr));
+                        }
+                        else
+                        {
+                            mvOsPrintf("%04x ", *((MV_U16*)memAddr));
+                        }
+                        break;
+
+                    case 4:
+                        if( memAddr == CPU_PHY_MEM(memAddr) )
+                        {
+                            mvOsPrintf("%08x ", MV_MEMIO32_READ(memAddr));
+                        }
+                        else
+                        {
+                            mvOsPrintf("%08x ", *((MV_U32*)memAddr));
+                        }
+                        break;
+                }
+            }
+            else
+            {
+                for(j=0; j<(access*2+1); j++)
+                    mvOsPrintf(" ");
+            }
+            i += access;
+            memAddr += access;
+            size -= access;
+            if(size <= 0)
+                break;
+        }
+        mvOsPrintf("\n");
+    }
+}
+
+void mvDebugPrintBufInfo(BUF_INFO* pBufInfo, int size, int access)
+{
+	if(pBufInfo == NULL)
+	{
+		mvOsPrintf("\n!!! pBufInfo = NULL\n");
+		return;
+	}
+    mvOsPrintf("\n*** pBufInfo=0x%x, cmdSts=0x%08x, pBuf=0x%x, bufSize=%d\n",
+               (unsigned int)pBufInfo, 
+			   (unsigned int)pBufInfo->cmdSts, 
+			   (unsigned int)pBufInfo->pBuff, 
+			   (unsigned int)pBufInfo->bufSize);
+    mvOsPrintf("pData=0x%x, byteCnt=%d, pNext=0x%x, uInfo1=0x%x, uInfo2=0x%x\n",
+               (unsigned int)pBufInfo->pData, 
+			   (unsigned int)pBufInfo->byteCnt, 
+			   (unsigned int)pBufInfo->pNextBufInfo,
+               (unsigned int)pBufInfo->userInfo1, 
+			   (unsigned int)pBufInfo->userInfo2);
+    if(pBufInfo->pData != NULL)
+    {
+        if(size > pBufInfo->byteCnt)
+            size = pBufInfo->byteCnt;
+        mvDebugMemDump(pBufInfo->pData, size, access);
+    }
+}
+
+void mvDebugPrintPktInfo(MV_PKT_INFO* pPktInfo, int size, int access)
+{
+    int frag, len;
+
+	if(pPktInfo == NULL)
+	{
+		mvOsPrintf("\n!!! pPktInfo = NULL\n");
+		return;
+	}
+    mvOsPrintf("\npPkt=%p, stat=0x%08x, numFr=%d, size=%d, pFr=%p, osInfo=0x%lx\n",
+                pPktInfo, pPktInfo->status, pPktInfo->numFrags, pPktInfo->pktSize, 
+                pPktInfo->pFrags, pPktInfo->osInfo);
+    
+    for(frag=0; frag<pPktInfo->numFrags; frag++)
+    {
+        mvOsPrintf("#%2d. bufVirt=%p, bufSize=%d\n", 
+                    frag, pPktInfo->pFrags[frag].bufVirtPtr, 
+                    pPktInfo->pFrags[frag].bufSize);
+        if(size > 0)
+        {
+            len = MV_MIN((int)pPktInfo->pFrags[frag].bufSize, size);
+            mvDebugMemDump(pPktInfo->pFrags[frag].bufVirtPtr, len, access);
+            size -= len;
+        }
+    }
+    
+}
+
+void    mvDebugPrintIpAddr(MV_U32 ipAddr)
+{
+    mvOsPrintf("%d.%d.%d.%d", ((ipAddr >> 24) & 0xFF), ((ipAddr >> 16) & 0xFF),
+                              ((ipAddr >> 8) & 0xFF), ((ipAddr >> 0) & 0xFF));
+}
+
+void    mvDebugPrintMacAddr(const MV_U8* pMacAddr)
+{
+    int     i;
+
+    mvOsPrintf("%02x", (unsigned int)pMacAddr[0]);
+    for(i=1; i<MV_MAC_ADDR_SIZE; i++)
+    {
+        mvOsPrintf(":%02x", pMacAddr[i]);
+    }
+    /* mvOsPrintf("\n");*/
+}
+
+
+/******* There are three functions deals with MV_DEBUG_TIMES structure ********/
+
+/* Reset MV_DEBUG_TIMES entry */
+void mvDebugResetTimeEntry(MV_DEBUG_TIMES* pTimeEntry, int count, char* pName)
+{
+    pTimeEntry->begin = 0;
+    pTimeEntry->count = count;
+    pTimeEntry->end = 0;
+    pTimeEntry->left = pTimeEntry->count;
+    pTimeEntry->total = 0;
+    pTimeEntry->min = 0xFFFFFFFF;
+    pTimeEntry->max = 0x0;
+    strncpy(pTimeEntry->name, pName, sizeof(pTimeEntry->name)-1);
+    pTimeEntry->name[sizeof(pTimeEntry->name)-1] = '\0';
+}
+
+/* Print out MV_DEBUG_TIMES entry */
+void mvDebugPrintTimeEntry(MV_DEBUG_TIMES* pTimeEntry, MV_BOOL isTitle)
+{
+    int     num;
+
+    if(isTitle == MV_TRUE)
+        mvOsPrintf("Event         NumOfEvents       TotalTime         Average       Min       Max\n");
+
+    num = pTimeEntry->count-pTimeEntry->left;
+    if(num > 0)
+    {
+        mvOsPrintf("%-11s     %6u          0x%08lx        %6lu     %6lu    %6lu\n",
+                pTimeEntry->name, num, pTimeEntry->total, pTimeEntry->total/num,
+                pTimeEntry->min, pTimeEntry->max);
+    }   
+}
+
+/* Update MV_DEBUG_TIMES entry */
+void mvDebugUpdateTimeEntry(MV_DEBUG_TIMES* pTimeEntry)
+{
+    MV_U32  delta;
+
+    if(pTimeEntry->left > 0)                                        
+    {                                                                           
+        if(pTimeEntry->end <= pTimeEntry->begin)       
+        {                                                                       
+            delta = pTimeEntry->begin - pTimeEntry->end;
+        }
+        else
+        {
+            delta = ((MV_U32)0x10000 - pTimeEntry->end) + pTimeEntry->begin;
+        }
+        pTimeEntry->total += delta;             
+
+        if(delta < pTimeEntry->min)    
+            pTimeEntry->min = delta;    
+
+        if(delta > pTimeEntry->max)    
+            pTimeEntry->max = delta;      
+
+        pTimeEntry->left--;                                                                                                                 
+    }
+}
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvDebug.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvDebug.h
new file mode 100644
index 0000000000..e4975bed5c
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvDebug.h
@@ -0,0 +1,178 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+
+#ifndef __INCmvDebugh
+#define __INCmvDebugh
+
+/* includes */
+#include "mvTypes.h"
+
+typedef enum 
+{
+    MV_MODULE_INVALID  = -1,
+    MV_MODULE_ETH      = 0,
+    MV_MODULE_IDMA,
+    MV_MODULE_XOR, 
+    MV_MODULE_TWASI,
+    MV_MODULE_MGI,
+    MV_MODULE_USB,
+    MV_MODULE_CESA,
+
+    MV_MODULE_MAX
+}MV_MODULE_ID;
+ 
+/* Define generic flags useful for most of modules */
+#define MV_DEBUG_FLAG_ALL   (0)
+#define MV_DEBUG_FLAG_INIT  (1 << 0)
+#define MV_DEBUG_FLAG_RX    (1 << 1)
+#define MV_DEBUG_FLAG_TX    (1 << 2)
+#define MV_DEBUG_FLAG_ERR   (1 << 3)
+#define MV_DEBUG_FLAG_TRACE (1 << 4)
+#define MV_DEBUG_FLAG_DUMP  (1 << 5)
+#define MV_DEBUG_FLAG_CACHE (1 << 6)
+#define MV_DEBUG_FLAG_IOCTL (1 << 7)
+#define MV_DEBUG_FLAG_STATS (1 << 8)
+
+extern MV_U32  mvDebug; 
+extern MV_U32  mvDebugModules[MV_MODULE_MAX];
+
+#ifdef MV_DEBUG
+# define MV_DEBUG_PRINT(module, flags, msg)     mvOsPrintf msg
+# define MV_DEBUG_CODE(module, flags, code)     code 
+#elif defined(MV_RT_DEBUG)
+# define MV_DEBUG_PRINT(module, flags, msg)                    \
+    if( (mvDebug & (1<<(module))) &&                           \
+        ((mvDebugModules[(module)] & (flags)) == (flags)) )    \
+        mvOsPrintf msg
+# define MV_DEBUG_CODE(module, flags, code)                    \
+    if( (mvDebug & (1<<(module))) &&                           \
+        ((mvDebugModules[(module)] & (flags)) == (flags)) )    \
+        code
+#else
+# define MV_DEBUG_PRINT(module, flags, msg)
+# define MV_DEBUG_CODE(module, flags, code)
+#endif
+
+
+
+/* typedefs */
+
+/*  time measurement structure used to check how much time pass between
+ *  two points
+ */
+typedef struct {
+    char            name[20];   /* name of the entry */
+    unsigned long   begin;      /* time measured on begin point */
+    unsigned long   end;        /* time measured on end point */
+    unsigned long   total;      /* Accumulated time */
+    unsigned long   left;       /* The rest measurement actions */
+    unsigned long   count;      /* Maximum measurement actions */
+    unsigned long   min;        /* Minimum time from begin to end */
+    unsigned long   max;        /* Maximum time from begin to end */
+} MV_DEBUG_TIMES;
+
+
+/* mvDebug.h API list */
+
+/****** Error Recording ******/
+
+/* Dump memory in specific format: 
+ * address: X1X1X1X1 X2X2X2X2 ... X8X8X8X8 
+ */
+void mvDebugMemDump(void* addr, int size, int access);
+
+void mvDebugPrintBufInfo(BUF_INFO* pBufInfo, int size, int access);
+
+void mvDebugPrintPktInfo(MV_PKT_INFO* pPktInfo, int size, int access);
+
+void    mvDebugPrintIpAddr(MV_U32 ipAddr);
+
+void mvDebugPrintMacAddr(const MV_U8* pMacAddr);
+
+/**** There are three functions deals with MV_DEBUG_TIMES structure ****/
+
+/* Reset MV_DEBUG_TIMES entry */
+void mvDebugResetTimeEntry(MV_DEBUG_TIMES* pTimeEntry, int count, char* name);
+
+/* Update MV_DEBUG_TIMES entry */
+void mvDebugUpdateTimeEntry(MV_DEBUG_TIMES* pTimeEntry);
+
+/* Print out MV_DEBUG_TIMES entry */
+void mvDebugPrintTimeEntry(MV_DEBUG_TIMES* pTimeEntry, MV_BOOL isTitle);
+
+
+/******** General ***********/
+
+/* Change value of mvDebugPrint global variable */
+
+void    mvDebugInit(void);
+void    mvDebugModuleEnable(MV_MODULE_ID module, MV_BOOL isEnable);
+void    mvDebugModuleSetFlags(MV_MODULE_ID module, MV_U32 flags);
+void    mvDebugModuleClearFlags(MV_MODULE_ID module, MV_U32 flags);
+
+
+#endif /* __INCmvDebug.h */
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvDeviceId.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvDeviceId.h
new file mode 100644
index 0000000000..478209407e
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvDeviceId.h
@@ -0,0 +1,225 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+        this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvDeviceIdh
+#define __INCmvDeviceIdh
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* defines  */
+#define MARVELL_VEN_ID		    0x11ab
+
+/* Disco-3 */
+#define MV64460_DEV_ID          	0x6480
+#define MV64460B_DEV_ID         	0x6485
+#define MV64430_DEV_ID          	0x6420
+
+/* Disco-5 */
+#define MV64560_DEV_ID          	0x6450
+
+/* Disco-6 */
+#define MV64660_DEV_ID          	0x6460
+
+/* Orion */        
+#define MV_1181_DEV_ID          	0x1181
+#define MV_5181_DEV_ID          	0x5181
+#define MV_5281_DEV_ID          	0x5281
+#define MV_5182_DEV_ID          	0x5182
+#define MV_8660_DEV_ID          	0x8660
+#define MV_5180_DEV_ID          	0x5180
+#define MV_5082_DEV_ID          	0x5082
+#define MV_1281_DEV_ID          	0x1281
+#define MV_6082_DEV_ID          	0x6082
+#define MV_6183_DEV_ID          	0x6183
+#define MV_6183L_DEV_ID          	0x6083
+
+#define MV_5281_D0_REV          	0x4
+#define MV_5281_D0_ID           	((MV_5281_DEV_ID << 16) | MV_5281_D0_REV)
+#define MV_5281_D0_NAME         "88F5281 D0"
+
+#define MV_5281_D1_REV          	0x5
+#define MV_5281_D1_ID           	((MV_5281_DEV_ID << 16) | MV_5281_D1_REV)
+#define MV_5281_D1_NAME         "88F5281 D1"
+
+#define MV_5281_D2_REV          	0x6
+#define MV_5281_D2_ID           	((MV_5281_DEV_ID << 16) | MV_5281_D2_REV)
+#define MV_5281_D2_NAME         "88F5281 D2"
+
+
+#define MV_5181L_A0_REV         	0x8 /* need for PCIE Er */
+#define MV_5181_A1_REV          	0x1 /* for USB Er ..*/
+#define MV_5181_B0_REV          	0x2
+#define MV_5181_B1_REV          	0x3
+#define MV_5182_A1_REV          	0x1
+#define MV_5180N_B1_REV         	0x3
+#define MV_5181L_A0_ID          	((MV_5181_DEV_ID << 16) | MV_5181L_A0_REV)
+
+
+
+/* kw */
+#define MV_6281_DEV_ID          	0x6281
+#define MV_6192_DEV_ID          	0x6192
+#define MV_6190_DEV_ID          	0x6190
+#define MV_6180_DEV_ID          	0x6180
+
+#define MV_6281_A0_REV         		0x2
+#define MV_6281_A0_ID          		((MV_6281_DEV_ID << 16) | MV_6281_A0_REV)
+#define MV_6281_A0_NAME         	"88F6281 A0"
+
+#define MV_6192_A0_REV         		0x2
+#define MV_6192_A0_ID          		((MV_6192_DEV_ID << 16) | MV_6192_A0_REV)
+#define MV_6192_A0_NAME         	"88F6192 A0"
+
+#define MV_6190_A0_REV         		0x2
+#define MV_6190_A0_ID          		((MV_6190_DEV_ID << 16) | MV_6190_A0_REV)
+#define MV_6190_A0_NAME         	"88F6190 A0"
+
+#define MV_6180_A0_REV         		0x2
+#define MV_6180_A0_ID          		((MV_6180_DEV_ID << 16) | MV_6180_A0_REV)
+#define MV_6180_A0_NAME         	"88F6180 A0"
+
+#define MV_6281_A1_REV              0x3
+#define MV_6281_A1_ID               ((MV_6281_DEV_ID << 16) | MV_6281_A1_REV)
+#define MV_6281_A1_NAME             "88F6281 A1"
+
+#define MV_6192_A1_REV              0x3
+#define MV_6192_A1_ID               ((MV_6192_DEV_ID << 16) | MV_6192_A1_REV)
+#define MV_6192_A1_NAME             "88F6192 A1"
+
+#define MV_6190_A1_REV              0x3
+#define MV_6190_A1_ID               ((MV_6190_DEV_ID << 16) | MV_6190_A1_REV)
+#define MV_6190_A1_NAME             "88F6190 A1"
+
+#define MV_6180_A1_REV              0x3
+#define MV_6180_A1_ID               ((MV_6180_DEV_ID << 16) | MV_6180_A1_REV)
+#define MV_6180_A1_NAME             "88F6180 A1" 
+
+#define MV_88F6XXX_A0_REV         	0x2
+#define MV_88F6XXX_A1_REV         	0x3
+/* Disco-Duo */
+#define MV_78XX0_ZY_DEV_ID       0x6381
+#define MV_78XX0_ZY_NAME         "MV78X00"
+
+#define MV_78XX0_Z0_REV         0x1
+#define MV_78XX0_Z0_ID          ((MV_78XX0_ZY_DEV_ID << 16) | MV_78XX0_Z0_REV)
+#define MV_78XX0_Z0_NAME        "78X00 Z0"
+
+#define MV_78XX0_Y0_REV         0x2
+#define MV_78XX0_Y0_ID          ((MV_78XX0_ZY_DEV_ID << 16) | MV_78XX0_Y0_REV)
+#define MV_78XX0_Y0_NAME        "78X00 Y0"
+
+#define MV_78XX0_DEV_ID       	0x7800
+#define MV_78XX0_NAME         	"MV78X00"
+
+#define MV_76100_DEV_ID      	0x7610
+#define MV_78200_DEV_ID      	0x7820
+#define MV_78100_DEV_ID      	0x7810
+#define MV_78XX0_A0_REV		0x1
+#define MV_78XX0_A1_REV		0x2
+
+#define MV_76100_NAME		"MV76100"
+#define MV_78100_NAME		"MV78100"
+#define MV_78200_NAME		"MV78200"
+
+#define MV_76100_A0_ID		((MV_76100_DEV_ID << 16) | MV_78XX0_A0_REV)
+#define MV_78100_A0_ID		((MV_78100_DEV_ID << 16) | MV_78XX0_A0_REV)
+#define MV_78200_A0_ID		((MV_78200_DEV_ID << 16) | MV_78XX0_A0_REV)
+
+#define MV_76100_A1_ID		((MV_76100_DEV_ID << 16) | MV_78XX0_A1_REV)
+#define MV_78100_A1_ID		((MV_78100_DEV_ID << 16) | MV_78XX0_A1_REV)
+#define MV_78200_A1_ID		((MV_78200_DEV_ID << 16) | MV_78XX0_A1_REV)
+
+#define MV_76100_A0_NAME	"MV76100 A0"
+#define MV_78100_A0_NAME	"MV78100 A0"
+#define MV_78200_A0_NAME	"MV78200 A0"
+#define MV_78XX0_A0_NAME	"MV78XX0 A0"
+
+#define MV_76100_A1_NAME	"MV76100 A1"
+#define MV_78100_A1_NAME	"MV78100 A1"
+#define MV_78200_A1_NAME	"MV78200 A1"
+#define MV_78XX0_A1_NAME	"MV78XX0 A1"
+
+/*MV88F632X family*/
+#define MV_6321_DEV_ID      	0x6321
+#define MV_6322_DEV_ID      	0x6322
+#define MV_6323_DEV_ID      	0x6323
+
+#define MV_6321_NAME		"88F6321"
+#define MV_6322_NAME		"88F6322"
+#define MV_6323_NAME		"88F6323"
+
+#define MV_632X_A1_REV		0x2
+
+#define MV_6321_A1_ID		((MV_6321_DEV_ID << 16) | MV_632X_A1_REV)
+#define MV_6322_A1_ID		((MV_6322_DEV_ID << 16) | MV_632X_A1_REV)
+#define MV_6323_A1_ID		((MV_6323_DEV_ID << 16) | MV_632X_A1_REV)
+
+#define MV_6321_A1_NAME		"88F6321 A1"
+#define MV_6322_A1_NAME		"88F6322 A1"
+#define MV_6323_A1_NAME		"88F6323 A1"
+
+
+#endif /* __INCmvDeviceIdh */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvHalVer.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvHalVer.h
new file mode 100644
index 0000000000..1849198569
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvHalVer.h
@@ -0,0 +1,73 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED.  The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer.
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    *   Neither the name of Marvell nor the names of its contributors may be
+        used to endorse or promote products derived from this software without
+        specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvHalVerh
+#define __INCmvHalVerh
+
+/* Defines */
+#define MV_HAL_VERSION			"FEROCEON_HAL_3_1_7"
+#define MV_RELEASE_BASELINE		"SoCandControllers_FEROCEON_RELEASE_7_9_2009_KW_4_3_4_DD_2_1_4_6183_1_1_4"
+
+#endif /* __INCmvHalVerh */
\ No newline at end of file
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvStack.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvStack.c
new file mode 100644
index 0000000000..41ca7cebaa
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvStack.c
@@ -0,0 +1,100 @@
+/******************************************************************************* 
+*                   Copyright 2003, Marvell Semiconductor Israel LTD.          * 
+* THIS CODE CONTAINS CONFIDENTIAL INFORMATION OF MARVELL.                      * 
+* NO RIGHTS ARE GRANTED HEREIN UNDER ANY PATENT, MASK WORK RIGHT OR COPYRIGHT  * 
+* OF MARVELL OR ANY THIRD PARTY. MARVELL RESERVES THE RIGHT AT ITS SOLE        * 
+* DISCRETION TO REQUEST THAT THIS CODE BE IMMEDIATELY RETURNED TO MARVELL.     * 
+* THIS CODE IS PROVIDED "AS IS". MARVELL MAKES NO WARRANTIES, EXPRESSED,       * 
+* IMPLIED OR OTHERWISE, REGARDING ITS ACCURACY, COMPLETENESS OR PERFORMANCE.   * 
+*                                                                              * 
+* MARVELL COMPRISES MARVELL TECHNOLOGY GROUP LTD. (MTGL) AND ITS SUBSIDIARIES, * 
+* MARVELL INTERNATIONAL LTD. (MIL), MARVELL TECHNOLOGY, INC. (MTI), MARVELL    * 
+* SEMICONDUCTOR, INC. (MSI), MARVELL ASIA PTE LTD. (MAPL), MARVELL JAPAN K.K.  * 
+* (MJKK), MARVELL SEMICONDUCTOR ISRAEL LTD (MSIL).                             * 
+********************************************************************************
+* mvQueue.c
+*
+* FILENAME:    $Workfile: mvStack.c $                     
+* REVISION:    $Revision: 1.1 $                              
+* LAST UPDATE: $Modtime:  $                  
+*                                                          
+* DESCRIPTION:                                             
+*     This file implements simple Stack LIFO functionality.
+*******************************************************************************/
+
+/* includes */
+#include "mvOs.h"
+#include "mvTypes.h"
+#include "mvDebug.h"
+#include "mvStack.h"
+
+/* defines  */
+
+
+/* Public functions */
+
+
+/* Purpose: Create new stack
+ * Inputs:
+ *	- MV_U32	noOfElements	- maximum number of elements in the stack.
+ *                              Each element 4 bytes size
+ * Return: void* - pointer to created stack.
+ */
+void*   mvStackCreate(int numOfElements)
+{
+	MV_STACK*   pStack;
+    MV_U32*     pStackElements;
+
+    pStack = (MV_STACK*)mvOsMalloc(sizeof(MV_STACK));
+    pStackElements = (MV_U32*)mvOsMalloc(numOfElements*sizeof(MV_U32));
+    if( (pStack == NULL) || (pStackElements == NULL) )
+    {
+	    mvOsPrintf("mvStack: Can't create new stack\n");
+        return NULL;
+    }
+    memset(pStackElements, 0, numOfElements*sizeof(MV_U32));
+    pStack->numOfElements = numOfElements;
+    pStack->stackIdx = 0;
+    pStack->stackElements = pStackElements;
+
+	return pStack;
+}
+
+/* Purpose: Delete existing stack
+ * Inputs:
+ *	- void* 	stackHndl 	- Stack handle as returned by "mvStackCreate()" function
+ *
+ * Return: MV_STATUS  	MV_NOT_FOUND - Failure. StackHandle is not valid.
+ *						MV_OK        - Success.
+ */
+MV_STATUS   mvStackDelete(void* stackHndl)
+{
+	MV_STACK*   pStack = (MV_STACK*)stackHndl;
+
+	if( (pStack == NULL) || (pStack->stackElements == NULL) )
+		return MV_NOT_FOUND;
+
+    mvOsFree(pStack->stackElements);
+    mvOsFree(pStack);
+
+    return MV_OK;
+}
+
+
+/* PrintOut status of the stack */
+void    mvStackStatus(void* stackHndl, MV_BOOL isPrintElements)
+{
+	int			i;
+    MV_STACK*   pStack = (MV_STACK*)stackHndl;
+
+    mvOsPrintf("StackHandle=%p, pElements=%p, numElements=%d, stackIdx=%d\n",
+                stackHndl, pStack->stackElements, pStack->numOfElements, 
+                pStack->stackIdx);
+    if(isPrintElements == MV_TRUE)
+    {
+        for(i=0; i<pStack->stackIdx; i++)
+        {
+            mvOsPrintf("%3d. Value=0x%x\n", i, pStack->stackElements[i]);
+        }
+    }
+}
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvStack.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvStack.h
new file mode 100644
index 0000000000..e247e61c2d
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvStack.h
@@ -0,0 +1,140 @@
+/******************************************************************************* 
+*                   Copyright 2003, Marvell Semiconductor Israel LTD.          * 
+* THIS CODE CONTAINS CONFIDENTIAL INFORMATION OF MARVELL.                      * 
+* NO RIGHTS ARE GRANTED HEREIN UNDER ANY PATENT, MASK WORK RIGHT OR COPYRIGHT  * 
+* OF MARVELL OR ANY THIRD PARTY. MARVELL RESERVES THE RIGHT AT ITS SOLE        * 
+* DISCRETION TO REQUEST THAT THIS CODE BE IMMEDIATELY RETURNED TO MARVELL.     * 
+* THIS CODE IS PROVIDED "AS IS". MARVELL MAKES NO WARRANTIES, EXPRESSED,       * 
+* IMPLIED OR OTHERWISE, REGARDING ITS ACCURACY, COMPLETENESS OR PERFORMANCE.   * 
+*                                                                              * 
+* MARVELL COMPRISES MARVELL TECHNOLOGY GROUP LTD. (MTGL) AND ITS SUBSIDIARIES, * 
+* MARVELL INTERNATIONAL LTD. (MIL), MARVELL TECHNOLOGY, INC. (MTI), MARVELL    * 
+* SEMICONDUCTOR, INC. (MSI), MARVELL ASIA PTE LTD. (MAPL), MARVELL JAPAN K.K.  * 
+* (MJKK), MARVELL SEMICONDUCTOR ISRAEL LTD (MSIL).                             * 
+********************************************************************************
+* mvStack.h - Header File for :
+*
+* FILENAME:    $Workfile: mvStack.h $
+* REVISION:    $Revision: 1.1 $
+* LAST UPDATE: $Modtime:  $
+*
+* DESCRIPTION:
+*     This file defines simple Stack (LIFO) functionality.
+*
+*******************************************************************************/
+
+#ifndef __mvStack_h__
+#define __mvStack_h__
+
+
+/* includes */
+#include "mvTypes.h"
+
+
+/* defines  */
+
+
+/* typedefs */
+/* Data structure describes general purpose Stack */
+typedef struct 
+{
+    int     stackIdx;
+    int     numOfElements;
+    MV_U32* stackElements;
+} MV_STACK;
+
+static INLINE MV_BOOL mvStackIsFull(void* stackHndl)
+{	
+    MV_STACK*   pStack = (MV_STACK*)stackHndl;
+
+    if(pStack->stackIdx == pStack->numOfElements)
+        return MV_TRUE;
+
+    return MV_FALSE;
+}
+
+static INLINE MV_BOOL mvStackIsEmpty(void* stackHndl)
+{	
+    MV_STACK*   pStack = (MV_STACK*)stackHndl;
+
+    if(pStack->stackIdx == 0)
+        return MV_TRUE;
+
+    return MV_FALSE;
+}
+/* Purpose: Push new element to stack
+ * Inputs:
+ *	- void* 	stackHndl 	- Stack handle as returned by "mvStackCreate()" function.
+ *	- MV_U32	value		- New element.
+ *
+ * Return: MV_STATUS  	MV_FULL - Failure. Stack is full.
+ *						MV_OK   - Success. Element is put to stack.
+ */
+static INLINE void mvStackPush(void* stackHndl, MV_U32 value)
+{	
+    MV_STACK*   pStack = (MV_STACK*)stackHndl;
+
+#ifdef MV_RT_DEBUG
+    if(pStack->stackIdx == pStack->numOfElements)
+    {
+        mvOsPrintf("mvStackPush: Stack is FULL\n");
+        return;
+    }
+#endif /* MV_RT_DEBUG */
+
+    pStack->stackElements[pStack->stackIdx] = value;
+    pStack->stackIdx++;
+}
+
+/* Purpose: Pop element from the top of stack and copy it to "pValue"
+ * Inputs:
+ *	- void* 	stackHndl 	- Stack handle as returned by "mvStackCreate()" function.
+ *	- MV_U32	value		- Element in the top of stack.
+ *
+ * Return: MV_STATUS  	MV_EMPTY - Failure. Stack is empty.
+ *						MV_OK    - Success. Element is removed from the stack and
+ *									copied to pValue argument
+ */
+static INLINE MV_U32   mvStackPop(void* stackHndl)
+{
+    MV_STACK*   pStack = (MV_STACK*)stackHndl;
+
+#ifdef MV_RT_DEBUG
+    if(pStack->stackIdx == 0)
+    {
+        mvOsPrintf("mvStackPop: Stack is EMPTY\n");
+        return 0;
+    }
+#endif /* MV_RT_DEBUG */
+
+    pStack->stackIdx--;
+    return pStack->stackElements[pStack->stackIdx];
+}
+
+static INLINE int       mvStackIndex(void* stackHndl)
+{
+    MV_STACK*   pStack = (MV_STACK*)stackHndl;
+
+    return pStack->stackIdx;
+}
+
+static INLINE int       mvStackFreeElements(void* stackHndl)
+{
+    MV_STACK*   pStack = (MV_STACK*)stackHndl;
+
+    return (pStack->numOfElements - pStack->stackIdx);
+}
+
+/* mvStack.h API list */
+
+/* Create new Stack */
+void*       mvStackCreate(int numOfElements);
+
+/* Delete existing stack */
+MV_STATUS   mvStackDelete(void* stackHndl);
+
+/* Print status of the stack */
+void        mvStackStatus(void* stackHndl, MV_BOOL isPrintElements);
+
+#endif /* __mvStack_h__ */
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvTypes.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvTypes.h
new file mode 100644
index 0000000000..de212a141d
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/common/mvTypes.h
@@ -0,0 +1,245 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED.  The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer.
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    *   Neither the name of Marvell nor the names of its contributors may be
+        used to endorse or promote products derived from this software without
+        specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvTypesh
+#define __INCmvTypesh
+
+/* Defines */
+
+/* The following is a list of Marvell status    */
+#define MV_ERROR		    (-1)
+#define MV_OK			    (0x00)  /* Operation succeeded                   */
+#define MV_FAIL			    (0x01)	/* Operation failed                      */
+#define MV_BAD_VALUE        (0x02)  /* Illegal value (general)               */
+#define MV_OUT_OF_RANGE     (0x03)  /* The value is out of range             */
+#define MV_BAD_PARAM        (0x04)  /* Illegal parameter in function called  */
+#define MV_BAD_PTR          (0x05)  /* Illegal pointer value                 */
+#define MV_BAD_SIZE         (0x06)  /* Illegal size                          */
+#define MV_BAD_STATE        (0x07)  /* Illegal state of state machine        */
+#define MV_SET_ERROR        (0x08)  /* Set operation failed                  */
+#define MV_GET_ERROR        (0x09)  /* Get operation failed                  */
+#define MV_CREATE_ERROR     (0x0A)  /* Fail while creating an item           */
+#define MV_NOT_FOUND        (0x0B)  /* Item not found                        */
+#define MV_NO_MORE          (0x0C)  /* No more items found                   */
+#define MV_NO_SUCH          (0x0D)  /* No such item                          */
+#define MV_TIMEOUT          (0x0E)  /* Time Out                              */
+#define MV_NO_CHANGE        (0x0F)  /* Parameter(s) is already in this value */
+#define MV_NOT_SUPPORTED    (0x10)  /* This request is not support           */
+#define MV_NOT_IMPLEMENTED  (0x11)  /* Request supported but not implemented */
+#define MV_NOT_INITIALIZED  (0x12)  /* The item is not initialized           */
+#define MV_NO_RESOURCE      (0x13)  /* Resource not available (memory ...)   */
+#define MV_FULL             (0x14)  /* Item is full (Queue or table etc...)  */
+#define MV_EMPTY            (0x15)  /* Item is empty (Queue or table etc...) */
+#define MV_INIT_ERROR       (0x16)  /* Error occured while INIT process      */
+#define MV_HW_ERROR         (0x17)  /* Hardware error                        */
+#define MV_TX_ERROR         (0x18)  /* Transmit operation not succeeded      */
+#define MV_RX_ERROR         (0x19)  /* Recieve operation not succeeded       */
+#define MV_NOT_READY	    (0x1A)	/* The other side is not ready yet       */
+#define MV_ALREADY_EXIST    (0x1B)  /* Tried to create existing item         */
+#define MV_OUT_OF_CPU_MEM   (0x1C)  /* Cpu memory allocation failed.         */
+#define MV_NOT_STARTED      (0x1D)  /* Not started yet         */
+#define MV_BUSY             (0x1E)  /* Item is busy.                         */
+#define MV_TERMINATE        (0x1F)  /* Item terminates it's work.            */
+#define MV_NOT_ALIGNED      (0x20)  /* Wrong alignment                       */
+#define MV_NOT_ALLOWED      (0x21)  /* Operation NOT allowed                 */
+#define MV_WRITE_PROTECT    (0x22)  /* Write protected                       */
+
+
+#define MV_INVALID  (int)(-1)
+
+#define MV_FALSE	0
+#define MV_TRUE     (!(MV_FALSE))
+
+
+#ifndef NULL
+#define NULL ((void*)0)
+#endif
+
+
+#ifndef MV_ASMLANGUAGE
+/* typedefs */
+
+typedef char  MV_8;
+typedef unsigned char	MV_U8;
+
+typedef int		MV_32;
+typedef unsigned int	MV_U32;
+
+typedef short		MV_16;
+typedef unsigned short	MV_U16;
+
+#ifdef MV_PPC64
+typedef long		MV_64;
+typedef unsigned long	MV_U64;
+#else
+typedef long long		MV_64;
+typedef unsigned long long	MV_U64;
+#endif
+
+typedef long		MV_LONG;	/* 32/64 */
+typedef unsigned long	MV_ULONG;	/* 32/64 */
+
+typedef int     MV_STATUS;
+typedef int     MV_BOOL;
+typedef void    MV_VOID;
+typedef float   MV_FLOAT;
+
+typedef int 	(*MV_FUNCPTR) (void);	  /* ptr to function returning int   */
+typedef void 	(*MV_VOIDFUNCPTR) (void); /* ptr to function returning void  */
+typedef double 	(*MV_DBLFUNCPTR) (void);  /* ptr to function returning double*/
+typedef float 	(*MV_FLTFUNCPTR) (void);  /* ptr to function returning float */
+
+typedef MV_U32 MV_KHZ;
+typedef MV_U32 MV_MHZ;
+typedef MV_U32 MV_HZ;
+
+
+/* This enumerator describes the set of commands that can be applied on   	*/
+/* an engine (e.g. IDMA, XOR). Appling a comman depends on the current   	*/
+/* status (see MV_STATE enumerator)                      					*/
+/* Start can be applied only when status is IDLE                         */
+/* Stop can be applied only when status is IDLE, ACTIVE or PAUSED        */
+/* Pause can be applied only when status is ACTIVE                          */
+/* Restart can be applied only when status is PAUSED                        */
+typedef enum _mvCommand
+{
+    MV_START,              /* Start	*/
+    MV_STOP,               /* Stop     */
+    MV_PAUSE,              /* Pause    */
+    MV_RESTART             /* Restart  */
+} MV_COMMAND;
+
+/* This enumerator describes the set of state conditions.					*/
+/* Moving from one state to other is stricted.   							*/
+typedef enum _mvState
+{
+    MV_IDLE,
+    MV_ACTIVE,
+    MV_PAUSED,
+    MV_UNDEFINED_STATE
+} MV_STATE;
+
+
+/* This structure describes address space window. Window base can be        */
+/* 64 bit, window size up to 4GB                                            */
+typedef struct _mvAddrWin
+{
+    MV_U32      baseLow;    /* 32bit base low       */
+    MV_U32      baseHigh;   /* 32bit base high      */
+    MV_U32      size;       /* 32bit size           */
+}MV_ADDR_WIN;
+
+/* This binary enumerator describes protection attribute status             */
+typedef enum _mvProtRight
+{
+    ALLOWED,        /* Protection attribute allowed                         */
+    FORBIDDEN       /* Protection attribute forbidden                       */
+}MV_PROT_RIGHT;
+
+/* Unified struct for Rx and Tx packet operations. The user is required to 	*/
+/* be familier only with Tx/Rx descriptor command status.               	*/
+typedef struct _bufInfo
+{
+    MV_U32   cmdSts;        /* Tx/Rx command status                                     */
+        MV_U16   byteCnt;       /* Size of valid data in the buffer     */
+    MV_U16   bufSize;       /* Total size of the buffer             */
+    MV_U8    *pBuff;            /* Pointer to Buffer                    */
+    MV_U8    *pData;            /* Pointer to data in the Buffer        */
+    MV_U32   userInfo1;         /* Tx/Rx attached user information 1    */
+    MV_U32   userInfo2;         /* Tx/Rx attached user information 2    */
+    struct _bufInfo *pNextBufInfo;  /* Next buffer in packet            */
+} BUF_INFO;
+
+/* This structure contains information describing one of buffers
+ * (fragments) they are built Ethernet packet.
+ */
+typedef struct
+{
+     MV_U8*	    bufVirtPtr;
+     MV_ULONG	bufPhysAddr;
+     MV_U32   	bufSize;
+     MV_U32     dataSize;
+     MV_U32		memHandle;
+	 MV_32      bufAddrShift;
+} MV_BUF_INFO;
+
+/* This structure contains information describing Ethernet packet.
+ * The packet can be divided for few buffers (fragments)
+ */
+typedef struct
+{
+    MV_ULONG   	osInfo;
+    MV_BUF_INFO *pFrags;
+    MV_U32      status;
+    MV_U16      pktSize;
+    MV_U16      numFrags;
+    MV_U32      ownerId;
+    MV_U32      fragIP;
+} MV_PKT_INFO;
+
+#endif /* MV_ASMLANGUAGE */
+
+#endif /* __INCmvTypesh */
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/dbg-trace.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/dbg-trace.c
new file mode 100644
index 0000000000..644fd02dac
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/dbg-trace.c
@@ -0,0 +1,110 @@
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+#include "dbg-trace.h"
+
+#define TRACE_ARR_LEN   800
+#define STR_LEN         128
+struct trace {
+    struct timeval tv;
+        char str[STR_LEN];
+    unsigned int callback_val1;
+    unsigned int callback_val2;
+        char valid;
+};
+static unsigned int (*trc_callback1) (unsigned char) = NULL;
+static unsigned int (*trc_callback2) (unsigned char) = NULL;
+static unsigned char trc_param1 = 0;
+static unsigned char trc_param2 = 0;
+struct trace *trc_arr;
+static int trc_index;
+static int trc_active = 0;
+
+void TRC_START()
+{
+    trc_active = 1;
+}
+
+void TRC_STOP()
+{
+    trc_active = 0;
+}
+
+void TRC_INIT(void *callback1, void *callback2, unsigned char callback1_param, unsigned char callback2_param)
+{
+    printk("Marvell debug tracing is on\n");
+        trc_arr = (struct trace *)kmalloc(TRACE_ARR_LEN*sizeof(struct trace),GFP_KERNEL);
+    if(trc_arr == NULL)
+    {
+        printk("Can't allocate Debug Trace buffer\n");
+        return;
+    }
+        memset(trc_arr,0,TRACE_ARR_LEN*sizeof(struct trace));
+        trc_index = 0;
+    trc_callback1 = callback1;
+    trc_callback2 = callback2;
+    trc_param1 = callback1_param;
+    trc_param2 = callback2_param;
+}
+void TRC_REC(char *fmt,...)
+{
+    va_list args;
+        struct trace *trc = &trc_arr[trc_index];
+
+    if(trc_active == 0)
+        return;
+
+    do_gettimeofday(&trc->tv);
+    if(trc_callback1)
+        trc->callback_val1 = trc_callback1(trc_param1);
+    if(trc_callback2)
+        trc->callback_val2 = trc_callback2(trc_param2);
+    va_start(args, fmt);
+    vsprintf(trc->str,fmt,args);
+    va_end(args);
+        trc->valid = 1;
+        if((++trc_index) == TRACE_ARR_LEN) {
+                trc_index = 0;
+    }
+}
+void TRC_OUTPUT(void)
+{
+        int i,j;
+        struct trace *p;
+        printk("\n\nTrace %d items\n",TRACE_ARR_LEN);
+        for(i=0,j=trc_index; i<TRACE_ARR_LEN; i++,j++) {
+                if(j == TRACE_ARR_LEN)
+                        j = 0;
+                p = &trc_arr[j];
+                if(p->valid) {
+            unsigned long uoffs;
+            struct trace *plast;
+            if(p == &trc_arr[0])
+                plast = &trc_arr[TRACE_ARR_LEN-1];
+            else
+                plast = p-1;
+            if(p->tv.tv_sec == ((plast)->tv.tv_sec))
+                uoffs = (p->tv.tv_usec - ((plast)->tv.tv_usec));
+            else
+                uoffs = (1000000 - ((plast)->tv.tv_usec)) +
+                    ((p->tv.tv_sec - ((plast)->tv.tv_sec) - 1) * 1000000) + 
+                    p->tv.tv_usec;
+                        printk("%03d: [+%ld usec]", j, (unsigned long)uoffs);
+            if(trc_callback1)
+                printk("[%u]",p->callback_val1);
+            if(trc_callback2)
+                printk("[%u]",p->callback_val2);
+            printk(": %s",p->str);
+        }
+                p->valid = 0;
+        }
+        memset(trc_arr,0,TRACE_ARR_LEN*sizeof(struct trace));
+        trc_index = 0;
+}
+void TRC_RELEASE(void)
+{
+        kfree(trc_arr);
+        trc_index = 0;
+}
+
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/dbg-trace.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/dbg-trace.h
new file mode 100644
index 0000000000..a5aac26736
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/dbg-trace.h
@@ -0,0 +1,24 @@
+
+#ifndef _MV_DBG_TRCE_H_
+#define _MV_DBG_TRCE_H_
+
+#ifdef CONFIG_MV_DBG_TRACE
+void TRC_INIT(void *callback1, void *callback2, 
+    unsigned char callback1_param, unsigned char callback2_param);
+void TRC_REC(char *fmt,...);
+void TRC_OUTPUT(void);
+void TRC_RELEASE(void);
+void TRC_START(void);
+void TRC_STOP(void);
+
+#else
+#define TRC_INIT(x1,x2,x3,x4)
+#define TRC_REC(X...)
+#define TRC_OUTPUT()
+#define TRC_RELEASE()
+#define TRC_START()
+#define TRC_STOP()
+#endif
+
+
+#endif
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvLib.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvLib.c
new file mode 100644
index 0000000000..5f62784473
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvLib.c
@@ -0,0 +1,2513 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED.  The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer.
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    *   Neither the name of Marvell nor the names of its contributors may be
+        used to endorse or promote products derived from this software without
+        specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "boardEnv/mvBoardEnvLib.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+#include "cpu/mvCpu.h"
+#include "cntmr/mvCntmr.h"
+#include "gpp/mvGpp.h"
+#include "twsi/mvTwsi.h"
+#include "pex/mvPex.h"
+#include "device/mvDevice.h"
+#include "eth/gbe/mvEthRegs.h"
+
+/* defines  */
+/* #define MV_DEBUG */
+#ifdef MV_DEBUG
+	#define DB(x)	x
+#else
+	#define DB(x)
+#endif
+
+extern MV_CPU_ARM_CLK _cpuARMDDRCLK[];
+
+#define CODE_IN_ROM		MV_FALSE
+#define CODE_IN_RAM		MV_TRUE
+
+extern	MV_BOARD_INFO*	boardInfoTbl[];
+#define BOARD_INFO(boardId)	boardInfoTbl[boardId - BOARD_ID_BASE]
+
+/* Locals */
+static MV_DEV_CS_INFO*  boardGetDevEntry(MV_32 devNum, MV_BOARD_DEV_CLASS devClass);
+
+MV_U32 tClkRate   = -1;
+
+
+/*******************************************************************************
+* mvBoardEnvInit - Init board
+*
+* DESCRIPTION:
+*		In this function the board environment take care of device bank
+*		initialization.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+MV_VOID mvBoardEnvInit(MV_VOID)
+{
+	MV_U32 boardId= mvBoardIdGet();
+
+	if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+	{
+		mvOsPrintf("mvBoardEnvInit:Board unknown.\n");
+		return;
+
+	}
+
+	/* Set GPP Out value */
+	MV_REG_WRITE(GPP_DATA_OUT_REG(0), BOARD_INFO(boardId)->gppOutValLow);
+	MV_REG_WRITE(GPP_DATA_OUT_REG(1), BOARD_INFO(boardId)->gppOutValHigh);
+
+	/* set GPP polarity */
+	mvGppPolaritySet(0, 0xFFFFFFFF, BOARD_INFO(boardId)->gppPolarityValLow);
+	mvGppPolaritySet(1, 0xFFFFFFFF, BOARD_INFO(boardId)->gppPolarityValHigh);
+
+    /* Workaround for Erratum FE-MISC-70*/
+    if(mvCtrlRevGet()==MV_88F6XXX_A0_REV)
+    {
+        BOARD_INFO(boardId)->gppOutEnValLow &= 0xfffffffd;
+        BOARD_INFO(boardId)->gppOutEnValLow |= (BOARD_INFO(boardId)->gppOutEnValHigh) & 0x00000002;
+    } /*End of WA*/
+
+	/* Set GPP Out Enable*/
+	mvGppTypeSet(0, 0xFFFFFFFF, BOARD_INFO(boardId)->gppOutEnValLow);
+	mvGppTypeSet(1, 0xFFFFFFFF, BOARD_INFO(boardId)->gppOutEnValHigh);
+
+	/* Nand CE */
+	MV_REG_BIT_SET(NAND_CTRL_REG, NAND_ACTCEBOOT_BIT);
+}
+
+/*******************************************************************************
+* mvBoardModelGet - Get Board model
+*
+* DESCRIPTION:
+*       This function returns 16bit describing board model.
+*       Board model is constructed of one byte major and minor numbers in the
+*       following manner:
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       String describing board model.
+*
+*******************************************************************************/
+MV_U16 mvBoardModelGet(MV_VOID)
+{
+	return (mvBoardIdGet() >> 16);
+}
+
+/*******************************************************************************
+* mbBoardRevlGet - Get Board revision
+*
+* DESCRIPTION:
+*       This function returns a 32bit describing the board revision.
+*       Board revision is constructed of 4bytes. 2bytes describes major number
+*       and the other 2bytes describes minor munber.
+*       For example for board revision 3.4 the function will return
+*       0x00030004.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       String describing board model.
+*
+*******************************************************************************/
+MV_U16 mvBoardRevGet(MV_VOID)
+{
+	return (mvBoardIdGet() & 0xFFFF);
+}
+
+/*******************************************************************************
+* mvBoardNameGet - Get Board name
+*
+* DESCRIPTION:
+*       This function returns a string describing the board model and revision.
+*       String is extracted from board I2C EEPROM.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       pNameBuff - Buffer to contain board name string. Minimum size 32 chars.
+*
+* RETURN:
+*
+*       MV_ERROR if informantion can not be read.
+*******************************************************************************/
+MV_STATUS mvBoardNameGet(char *pNameBuff)
+{
+	MV_U32 boardId= mvBoardIdGet();
+
+	if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+	{
+		mvOsSPrintf (pNameBuff, "Board unknown.\n");
+		return MV_ERROR;
+
+	}
+
+	mvOsSPrintf (pNameBuff, "%s",BOARD_INFO(boardId)->boardName);
+
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvBoardIsPortInSgmii -
+*
+* DESCRIPTION:
+*       This routine returns MV_TRUE for port number works in SGMII or MV_FALSE
+*	For all other options.
+*
+* INPUT:
+*       ethPortNum - Ethernet port number.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_TRUE - port in SGMII.
+*       MV_FALSE - other.
+*
+*******************************************************************************/
+MV_BOOL mvBoardIsPortInSgmii(MV_U32 ethPortNum)
+{
+    MV_BOOL ethPortSgmiiSupport[BOARD_ETH_PORT_NUM] = MV_ETH_PORT_SGMII;
+
+    if(ethPortNum >= BOARD_ETH_PORT_NUM)
+    {
+	    mvOsPrintf ("Invalid portNo=%d\n", ethPortNum);
+		return MV_FALSE;
+    }
+    return ethPortSgmiiSupport[ethPortNum];
+}
+
+/*******************************************************************************
+* mvBoardIsPortInGmii -
+*
+* DESCRIPTION:
+*       This routine returns MV_TRUE for port number works in GMII or MV_FALSE
+*	For all other options.
+*
+* INPUT:
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_TRUE - port in GMII.
+*       MV_FALSE - other.
+*
+*******************************************************************************/
+MV_BOOL mvBoardIsPortInGmii(MV_VOID)
+{
+	MV_U32 devClassId, devClass = 0;
+	if (mvBoardMppGroupTypeGet(devClass) == MV_BOARD_AUTO)
+	{
+		/* Get MPP module ID */
+		devClassId = mvBoarModuleTypeGet(devClass);
+		if (MV_BOARD_MODULE_GMII_ID == devClassId)
+			return MV_TRUE;
+	}
+	else if (mvBoardMppGroupTypeGet(devClass) == MV_BOARD_GMII)
+		return MV_TRUE;
+
+    return MV_FALSE;
+}
+/*******************************************************************************
+* mvBoardPhyAddrGet - Get the phy address
+*
+* DESCRIPTION:
+*       This routine returns the Phy address of a given ethernet port.
+*
+* INPUT:
+*       ethPortNum - Ethernet port number.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       32bit describing Phy address, -1 if the port number is wrong.
+*
+*******************************************************************************/
+MV_32 mvBoardPhyAddrGet(MV_U32 ethPortNum)
+{
+	MV_U32 boardId= mvBoardIdGet();
+
+	if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+	{
+		mvOsPrintf("mvBoardPhyAddrGet: Board unknown.\n");
+		return MV_ERROR;
+	}
+
+	return BOARD_INFO(boardId)->pBoardMacInfo[ethPortNum].boardEthSmiAddr;
+}
+
+/*******************************************************************************
+* mvBoardMacSpeedGet - Get the Mac speed
+*
+* DESCRIPTION:
+*       This routine returns the Mac speed if pre define of a given ethernet port.
+*
+* INPUT:
+*       ethPortNum - Ethernet port number.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_BOARD_MAC_SPEED, -1 if the port number is wrong.
+*
+*******************************************************************************/
+MV_BOARD_MAC_SPEED      mvBoardMacSpeedGet(MV_U32 ethPortNum)
+{
+	MV_U32 boardId= mvBoardIdGet();
+
+	if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+	{
+		mvOsPrintf("mvBoardMacSpeedGet: Board unknown.\n");
+		return MV_ERROR;
+	}
+
+	return BOARD_INFO(boardId)->pBoardMacInfo[ethPortNum].boardMacSpeed;
+}
+
+/*******************************************************************************
+* mvBoardLinkStatusIrqGet - Get the IRQ number for the link status indication
+*
+* DESCRIPTION:
+*       This routine returns the IRQ number for the link status indication.
+*
+* INPUT:
+*       ethPortNum - Ethernet port number.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       the number of the IRQ for the link status indication, -1 if the port 
+*	number is wrong or if not relevant.
+*
+*******************************************************************************/
+MV_32	mvBoardLinkStatusIrqGet(MV_U32 ethPortNum)
+{
+	MV_U32 boardId = mvBoardIdGet();
+
+	if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+	{
+		mvOsPrintf("mvBoardLinkStatusIrqGet: Board unknown.\n");
+		return MV_ERROR;
+	}
+
+	return BOARD_INFO(boardId)->pSwitchInfo[ethPortNum].linkStatusIrq;
+}
+
+/*******************************************************************************
+* mvBoardSwitchPortGet - Get the mapping between the board connector and the 
+* Ethernet Switch port
+*
+* DESCRIPTION:
+*       This routine returns the matching Switch port.
+*
+* INPUT:
+*       ethPortNum - Ethernet port number.
+*	boardPortNum - logical number of the connector on the board
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       the matching Switch port, -1 if the port number is wrong or if not relevant.
+*
+*******************************************************************************/
+MV_32	mvBoardSwitchPortGet(MV_U32 ethPortNum, MV_U8 boardPortNum)
+{
+	MV_U32 boardId = mvBoardIdGet();
+
+	if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+	{
+		mvOsPrintf("mvBoardSwitchPortGet: Board unknown.\n");
+		return MV_ERROR;
+	}
+	if (boardPortNum >= BOARD_ETH_SWITCH_PORT_NUM)
+	{
+		mvOsPrintf("mvBoardSwitchPortGet: Illegal board port number.\n");
+		return MV_ERROR;
+	}
+
+	return BOARD_INFO(boardId)->pSwitchInfo[ethPortNum].qdPort[boardPortNum];
+}
+
+/*******************************************************************************
+* mvBoardSwitchCpuPortGet - Get the the Ethernet Switch CPU port
+*
+* DESCRIPTION:
+*       This routine returns the Switch CPU port.
+*
+* INPUT:
+*       ethPortNum - Ethernet port number.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       the Switch CPU port, -1 if the port number is wrong or if not relevant.
+*
+*******************************************************************************/
+MV_32	mvBoardSwitchCpuPortGet(MV_U32 ethPortNum)
+{
+	MV_U32 boardId = mvBoardIdGet();
+
+	if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+	{
+		mvOsPrintf("mvBoardSwitchCpuPortGet: Board unknown.\n");
+		return MV_ERROR;
+	}
+
+	return BOARD_INFO(boardId)->pSwitchInfo[ethPortNum].qdCpuPort;
+}
+
+/*******************************************************************************
+* mvBoardIsSwitchConnected - Get switch connection status 
+* DESCRIPTION:
+*       This routine returns port's connection status
+*
+* INPUT:
+*       ethPortNum - Ethernet port number.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       1 - if ethPortNum is connected to switch, 0 otherwise
+*
+*******************************************************************************/
+MV_32	mvBoardIsSwitchConnected(MV_U32 ethPortNum)
+{
+	MV_U32 boardId = mvBoardIdGet();
+
+	if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+	{
+		mvOsPrintf("mvBoardIsSwitchConnected: Board unknown.\n");
+		return MV_ERROR;
+	}
+
+	if(ethPortNum >= BOARD_INFO(boardId)->numBoardMacInfo)
+	{
+		mvOsPrintf("mvBoardIsSwitchConnected: Illegal port number(%u)\n", ethPortNum);
+		return MV_ERROR;
+	}
+	
+	if((MV_32)(BOARD_INFO(boardId)->pSwitchInfo))	
+	return (MV_32)(BOARD_INFO(boardId)->pSwitchInfo[ethPortNum].switchOnPort == ethPortNum);
+	else
+		return 0;
+}
+/*******************************************************************************
+* mvBoardSmiScanModeGet - Get Switch SMI scan mode
+*
+* DESCRIPTION:
+*       This routine returns Switch SMI scan mode.
+*
+* INPUT:
+*       ethPortNum - Ethernet port number.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       1 for SMI_MANUAL_MODE, -1 if the port number is wrong or if not relevant.
+*
+*******************************************************************************/
+MV_32	mvBoardSmiScanModeGet(MV_U32 ethPortNum)
+{
+	MV_U32 boardId = mvBoardIdGet();
+
+	if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+	{
+		mvOsPrintf("mvBoardSmiScanModeGet: Board unknown.\n");
+		return MV_ERROR;
+	}
+
+	return BOARD_INFO(boardId)->pSwitchInfo[ethPortNum].smiScanMode;
+}
+/*******************************************************************************
+* mvBoardSpecInitGet -
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*       None.
+*
+* RETURN: Return MV_TRUE and parameters in case board need spesific phy init, 
+* 	  otherwise return MV_FALSE. 
+*
+*
+*******************************************************************************/
+
+MV_BOOL mvBoardSpecInitGet(MV_U32* regOff, MV_U32* data)
+{
+	return MV_FALSE;
+}
+
+/*******************************************************************************
+* mvBoardTclkGet - Get the board Tclk (Controller clock)
+*
+* DESCRIPTION:
+*       This routine extract the controller core clock.
+*       This function uses the controller counters to make identification.
+*		Note: In order to avoid interference, make sure task context switch
+*		and interrupts will not occure during this function operation
+*
+* INPUT:
+*       countNum - Counter number.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       32bit clock cycles in Hertz.
+*
+*******************************************************************************/
+MV_U32 mvBoardTclkGet(MV_VOID)
+{
+    if(mvCtrlModelGet()==MV_6281_DEV_ID)
+    {
+#if defined(TCLK_AUTO_DETECT)
+	MV_U32 tmpTClkRate = MV_BOARD_TCLK_166MHZ;
+
+    tmpTClkRate = MV_REG_READ(MPP_SAMPLE_AT_RESET);
+    tmpTClkRate &= MSAR_TCLCK_MASK;
+
+    switch (tmpTClkRate)
+    {
+    case MSAR_TCLCK_166:
+            return MV_BOARD_TCLK_166MHZ;
+            break;
+    case MSAR_TCLCK_200:
+            return MV_BOARD_TCLK_200MHZ;
+            break;
+    }
+#else
+    return MV_BOARD_TCLK_200MHZ;
+#endif
+    }
+
+        return MV_BOARD_TCLK_166MHZ;
+
+}
+/*******************************************************************************
+* mvBoardSysClkGet - Get the board SysClk (CPU bus clock)
+*
+* DESCRIPTION:
+*       This routine extract the CPU bus clock.
+*
+* INPUT:
+*       countNum - Counter number.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       32bit clock cycles in Hertz.
+*
+*******************************************************************************/
+static MV_U32  mvBoard6180SysClkGet(MV_VOID)
+{
+	MV_U32 	sysClkRate=0;
+	MV_CPU_ARM_CLK _cpu6180_ddr_l2_CLK[] = MV_CPU6180_DDR_L2_CLCK_TBL;
+
+	sysClkRate = MV_REG_READ(MPP_SAMPLE_AT_RESET);
+	sysClkRate = sysClkRate & MSAR_CPUCLCK_MASK_6180;
+	sysClkRate = sysClkRate >> MSAR_CPUCLCK_OFFS_6180;
+			
+	sysClkRate = _cpu6180_ddr_l2_CLK[sysClkRate].ddrClk;
+
+	return sysClkRate;
+
+}
+
+MV_U32  mvBoardSysClkGet(MV_VOID)
+{
+#ifdef SYSCLK_AUTO_DETECT
+	MV_U32 sysClkRate, tmp, pClkRate, indexDdrRtio;
+	MV_U32 cpuCLK[] = MV_CPU_CLCK_TBL;
+	MV_U32 ddrRtio[][2] = MV_DDR_CLCK_RTIO_TBL;
+
+	if(mvCtrlModelGet() == MV_6180_DEV_ID)
+		return mvBoard6180SysClkGet();
+
+	tmp = MV_REG_READ(MPP_SAMPLE_AT_RESET);
+	pClkRate = MSAR_CPUCLCK_EXTRACT(tmp);
+	pClkRate = cpuCLK[pClkRate];
+
+	indexDdrRtio = tmp & MSAR_DDRCLCK_RTIO_MASK;
+	indexDdrRtio = indexDdrRtio >> MSAR_DDRCLCK_RTIO_OFFS;
+    if(ddrRtio[indexDdrRtio][0] != 0)
+        sysClkRate = ((pClkRate * ddrRtio[indexDdrRtio][1]) / ddrRtio[indexDdrRtio][0]);
+    else
+        sysClkRate = 0;
+	return sysClkRate;
+#else
+	return MV_BOARD_DEFAULT_SYSCLK;
+#endif
+}
+
+
+/*******************************************************************************
+* mvBoardPexBridgeIntPinGet - Get PEX to PCI bridge interrupt pin number
+*
+* DESCRIPTION:
+*		Multi-ported PCI Express bridges that is implemented on the board
+*		collapse interrupts across multiple conventional PCI/PCI-X buses.
+*		A dual-headed PCI Express bridge would map (or "swizzle") the
+*		interrupts per the following table (in accordance with the respective
+*		logical PCI/PCI-X bridge's Device Number), collapse the INTA#-INTD#
+*		signals from its two logical PCI/PCI-X bridges, collapse the
+*		INTA#-INTD# signals from any internal sources, and convert the
+*		signals to in-band PCI Express messages. 10
+*		This function returns the upstream interrupt as it was converted by
+*		the bridge, according to board configuration and the following table:
+*					  		PCI dev num
+*			Interrupt pin 	7, 	8, 	9
+*		   			A  ->	A	D	C
+*		   			B  -> 	B	A	D
+*		   			C  -> 	C	B	A
+*		  			D  ->	D	C	B
+*
+*
+* INPUT:
+*       devNum - PCI/PCIX device number.
+*       intPin - PCI Int pin
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       Int pin connected to the Interrupt controller
+*
+*******************************************************************************/
+MV_U32 mvBoardPexBridgeIntPinGet(MV_U32 devNum, MV_U32 intPin)
+{
+	MV_U32 realIntPin = ((intPin + (3 - (devNum % 4))) %4 );
+
+	if (realIntPin == 0) return 4;
+		else return realIntPin;
+
+}
+
+/*******************************************************************************
+* mvBoardDebugLedNumGet - Get number of debug Leds
+*
+* DESCRIPTION:
+* INPUT:
+*       boardId
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+MV_U32 mvBoardDebugLedNumGet(MV_U32 boardId)
+{
+	return BOARD_INFO(boardId)->activeLedsNumber;
+}
+
+/*******************************************************************************
+* mvBoardDebugLeg - Set the board debug Leds
+*
+* DESCRIPTION: turn on/off status leds.
+* 	       Note: assume MPP leds are part of group 0 only.
+*
+* INPUT:
+*       hexNum - Number to be displied in hex by Leds.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+MV_VOID mvBoardDebugLed(MV_U32 hexNum)
+{
+    MV_U32 val = 0,totalMask, currentBitMask = 1,i;
+    MV_U32 boardId= mvBoardIdGet();
+
+    if (BOARD_INFO(boardId)->pLedGppPin == NULL)
+	return;
+
+    totalMask = (1 << BOARD_INFO(boardId)->activeLedsNumber) -1;
+    hexNum &= totalMask;
+    totalMask = 0;
+
+    for (i = 0 ; i < BOARD_INFO(boardId)->activeLedsNumber ; i++)
+    {
+	if (hexNum & currentBitMask)
+	{
+	    val |= (1 << BOARD_INFO(boardId)->pLedGppPin[i]);
+	}
+
+	totalMask |= (1 << BOARD_INFO(boardId)->pLedGppPin[i]);
+
+	currentBitMask = (currentBitMask << 1);
+    }
+
+    if (BOARD_INFO(boardId)->ledsPolarity)
+    {
+	mvGppValueSet(0, totalMask, val);
+    }
+    else
+    {
+	mvGppValueSet(0, totalMask, ~val);
+    }
+}
+
+
+/*******************************************************************************
+* mvBoarGpioPinGet - mvBoarGpioPinGet
+*
+* DESCRIPTION:
+*
+* INPUT:
+*		class - MV_BOARD_GPP_CLASS enum.
+*
+* OUTPUT:
+*		None.
+*
+* RETURN:
+*       GPIO pin number. The function return -1 for bad parameters.
+*
+*******************************************************************************/
+MV_32 mvBoarGpioPinNumGet(MV_BOARD_GPP_CLASS class, MV_U32 index)
+{
+	MV_U32 boardId, i;
+	MV_U32 indexFound = 0;
+
+	boardId = mvBoardIdGet();
+
+	if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+	{
+		mvOsPrintf("mvBoardRTCGpioPinGet:Board unknown.\n");
+		return MV_ERROR;
+
+	}
+
+        for (i = 0; i < BOARD_INFO(boardId)->numBoardGppInfo; i++)
+		if (BOARD_INFO(boardId)->pBoardGppInfo[i].devClass == class) {
+			if (indexFound == index)
+        			return (MV_U32)BOARD_INFO(boardId)->pBoardGppInfo[i].gppPinNum;
+			else
+				indexFound++;
+
+		}
+
+	return MV_ERROR;
+}
+
+
+/*******************************************************************************
+* mvBoardRTCGpioPinGet - mvBoardRTCGpioPinGet
+*
+* DESCRIPTION:
+*
+* INPUT:
+*		None.
+*
+* OUTPUT:
+*		None.
+*
+* RETURN:
+*       GPIO pin number. The function return -1 for bad parameters.
+*
+*******************************************************************************/
+MV_32 mvBoardRTCGpioPinGet(MV_VOID)
+{
+	return mvBoarGpioPinNumGet(BOARD_GPP_RTC, 0);
+}
+
+
+/*******************************************************************************
+* mvBoardReset - mvBoardReset
+*
+* DESCRIPTION:
+*			Reset the board
+* INPUT:
+*		None.
+*
+* OUTPUT:
+*		None.
+*
+* RETURN:
+*       None
+*
+*******************************************************************************/
+MV_VOID	mvBoardReset(MV_VOID)
+{
+	MV_32 resetPin;
+
+	/* Get gpp reset pin if define */
+	resetPin = mvBoardResetGpioPinGet();
+	if (resetPin != MV_ERROR)
+	{
+        	MV_REG_BIT_RESET( GPP_DATA_OUT_REG(0) ,(1 << resetPin));
+		MV_REG_BIT_RESET( GPP_DATA_OUT_EN_REG(0) ,(1 << resetPin));
+
+	}
+	else
+	{
+	    /* No gpp reset pin was found, try to reset ussing
+	    system reset out */
+	    MV_REG_BIT_SET( CPU_RSTOUTN_MASK_REG , BIT2);
+	    MV_REG_BIT_SET( CPU_SYS_SOFT_RST_REG , BIT0);
+	}
+}
+
+/*******************************************************************************
+* mvBoardResetGpioPinGet - mvBoardResetGpioPinGet
+*
+* DESCRIPTION:
+*
+* INPUT:
+*		None.
+*
+* OUTPUT:
+*		None.
+*
+* RETURN:
+*       GPIO pin number. The function return -1 for bad parameters.
+*
+*******************************************************************************/
+MV_32 mvBoardResetGpioPinGet(MV_VOID)
+{
+	return mvBoarGpioPinNumGet(BOARD_GPP_RESET, 0);
+}
+/*******************************************************************************
+* mvBoardSDIOGpioPinGet - mvBoardSDIOGpioPinGet
+*
+* DESCRIPTION:
+*	used for hotswap detection
+* INPUT:
+*		None.
+*
+* OUTPUT:
+*		None.
+*
+* RETURN:
+*       GPIO pin number. The function return -1 for bad parameters.
+*
+*******************************************************************************/
+MV_32  mvBoardSDIOGpioPinGet(MV_VOID)
+{
+	return mvBoarGpioPinNumGet(BOARD_GPP_SDIO_DETECT, 0);
+}
+
+/*******************************************************************************
+* mvBoardUSBVbusGpioPinGet - return Vbus input GPP
+*
+* DESCRIPTION:
+*
+* INPUT:
+*		int  devNo.
+*
+* OUTPUT:
+*		None.
+*
+* RETURN:
+*       GPIO pin number. The function return -1 for bad parameters.
+*
+*******************************************************************************/
+MV_32 mvBoardUSBVbusGpioPinGet(MV_32 devId)
+{
+	return mvBoarGpioPinNumGet(BOARD_GPP_USB_VBUS, devId);
+}
+
+/*******************************************************************************
+* mvBoardUSBVbusEnGpioPinGet - return Vbus Enable output GPP
+*
+* DESCRIPTION:
+*
+* INPUT:
+*		int  devNo.
+*
+* OUTPUT:
+*		None.
+*
+* RETURN:
+*       GPIO pin number. The function return -1 for bad parameters.
+*
+*******************************************************************************/
+MV_32 mvBoardUSBVbusEnGpioPinGet(MV_32 devId)
+{
+	return mvBoarGpioPinNumGet(BOARD_GPP_USB_VBUS_EN, devId);
+}
+
+
+/*******************************************************************************
+* mvBoardGpioIntMaskGet - Get GPIO mask for interrupt pins
+*
+* DESCRIPTION:
+*		This function returns a 32-bit mask of GPP pins that connected to
+*		interrupt generating sources on board.
+*		For example if UART channel A is hardwired to GPP pin 8 and
+*		UART channel B is hardwired to GPP pin 4 the fuinction will return
+*		the value 0x000000110
+*
+* INPUT:
+*		None.
+*
+* OUTPUT:
+*		None.
+*
+* RETURN:
+*		See description. The function return -1 if board is not identified.
+*
+*******************************************************************************/
+MV_32 mvBoardGpioIntMaskLowGet(MV_VOID)
+{
+	MV_U32 boardId;
+
+	boardId = mvBoardIdGet();
+
+	if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+	{
+		mvOsPrintf("mvBoardGpioIntMaskGet:Board unknown.\n");
+		return MV_ERROR;
+
+	}
+
+	return BOARD_INFO(boardId)->intsGppMaskLow;
+}
+MV_32 mvBoardGpioIntMaskHighGet(MV_VOID)
+{
+	MV_U32 boardId;
+
+	boardId = mvBoardIdGet();
+
+	if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+	{
+		mvOsPrintf("mvBoardGpioIntMaskGet:Board unknown.\n");
+		return MV_ERROR;
+
+	}
+
+	return BOARD_INFO(boardId)->intsGppMaskHigh;
+}
+
+
+/*******************************************************************************
+* mvBoardMppGet - Get board dependent MPP register value
+*
+* DESCRIPTION:
+*		MPP settings are derived from board design.
+*		MPP group consist of 8 MPPs. An MPP group represent MPP
+*		control register.
+*       This function retrieves board dependend MPP register value.
+*
+* INPUT:
+*       mppGroupNum - MPP group number.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       32bit value describing MPP control register value.
+*
+*******************************************************************************/
+MV_32 mvBoardMppGet(MV_U32 mppGroupNum)
+{
+	MV_U32 boardId;
+
+	boardId = mvBoardIdGet();
+
+	if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+	{
+		mvOsPrintf("mvBoardMppGet:Board unknown.\n");
+		return MV_ERROR;
+
+	}
+
+	return BOARD_INFO(boardId)->pBoardMppConfigValue[0].mppGroup[mppGroupNum];
+}
+
+
+/*******************************************************************************
+* mvBoardMppGroupId - If MPP group type is AUTO then identify it using twsi
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*
+*******************************************************************************/
+MV_VOID mvBoardMppGroupIdUpdate(MV_VOID)
+{
+
+	MV_BOARD_MPP_GROUP_CLASS devClass;
+	MV_BOARD_MODULE_ID_CLASS devClassId;
+	MV_BOARD_MPP_TYPE_CLASS mppGroupType;
+	MV_U32 devId;
+	MV_U32 maxMppGrp = 1;
+	
+	devId = mvCtrlModelGet();
+
+	switch(devId){
+		case MV_6281_DEV_ID:
+			maxMppGrp = MV_6281_MPP_MAX_MODULE;
+			break;
+		case MV_6192_DEV_ID:
+			maxMppGrp = MV_6192_MPP_MAX_MODULE;
+			break;
+        case MV_6190_DEV_ID:
+            maxMppGrp = MV_6190_MPP_MAX_MODULE;
+            break;
+		case MV_6180_DEV_ID:
+			maxMppGrp = MV_6180_MPP_MAX_MODULE;
+			break;		
+	}
+
+	for (devClass = 0; devClass < maxMppGrp; devClass++)
+	{
+		/* If MPP group can be defined by the module connected to it */
+		if (mvBoardMppGroupTypeGet(devClass) == MV_BOARD_AUTO)
+		{
+			/* Get MPP module ID */
+			devClassId = mvBoarModuleTypeGet(devClass);
+			if (MV_ERROR != devClassId)
+			{
+				switch(devClassId)
+				{
+				case MV_BOARD_MODULE_TDM_ID:
+				case MV_BOARD_MODULE_TDM_5CHAN_ID:
+					mppGroupType = MV_BOARD_TDM;
+					break;
+				case MV_BOARD_MODULE_AUDIO_ID:
+					mppGroupType = MV_BOARD_AUDIO;
+					break;
+				case MV_BOARD_MODULE_RGMII_ID:
+					mppGroupType = MV_BOARD_RGMII;
+					break;
+				case MV_BOARD_MODULE_GMII_ID:
+					mppGroupType = MV_BOARD_GMII;
+					break;
+				case MV_BOARD_MODULE_TS_ID:
+					mppGroupType = MV_BOARD_TS;
+					break;
+				case MV_BOARD_MODULE_MII_ID:
+					mppGroupType = MV_BOARD_MII;
+					break;
+				default:
+					mppGroupType = MV_BOARD_OTHER;
+					break;
+				}
+			}
+			else
+				/* The module bay is empty */
+				mppGroupType = MV_BOARD_OTHER;
+			
+			/* Update MPP group type */
+			mvBoardMppGroupTypeSet(devClass, mppGroupType);
+		}
+
+		/* Update MPP output voltage for RGMII 1.8V. Set port to GMII for GMII module */
+		if ((mvBoardMppGroupTypeGet(devClass) == MV_BOARD_RGMII))
+			MV_REG_BIT_SET(MPP_OUTPUT_DRIVE_REG,MPP_1_8_RGMII1_OUTPUT_DRIVE | MPP_1_8_RGMII0_OUTPUT_DRIVE);
+        	else 
+		{
+			if ((mvBoardMppGroupTypeGet(devClass) == MV_BOARD_GMII))
+        		{
+				MV_REG_BIT_RESET(MPP_OUTPUT_DRIVE_REG, BIT7 | BIT15);
+            			MV_REG_BIT_RESET(ETH_PORT_SERIAL_CTRL_1_REG(0),BIT3);
+            			MV_REG_BIT_RESET(ETH_PORT_SERIAL_CTRL_1_REG(1),BIT3);
+        		}
+        		else if ((mvBoardMppGroupTypeGet(devClass) == MV_BOARD_MII))
+        		{
+				/* Assumption that the MDC & MDIO should be 3.3V */
+				MV_REG_BIT_RESET(MPP_OUTPUT_DRIVE_REG, BIT7 | BIT15);
+				/* Assumption that only ETH1 can be MII when using modules on DB */
+            			MV_REG_BIT_RESET(ETH_PORT_SERIAL_CTRL_1_REG(1),BIT3);
+        		}
+		}
+	}
+}
+
+/*******************************************************************************
+* mvBoardMppGroupTypeGet 
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       mppGroupClass - MPP group number 0  for MPP[35:20] or 1 for MPP[49:36].
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*
+*******************************************************************************/
+MV_BOARD_MPP_TYPE_CLASS mvBoardMppGroupTypeGet(MV_BOARD_MPP_GROUP_CLASS mppGroupClass)
+{
+	MV_U32 boardId;
+
+	boardId = mvBoardIdGet();
+
+	if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+	{
+		mvOsPrintf("mvBoardMppGet:Board unknown.\n");
+		return MV_ERROR;
+
+	}
+	
+	if (mppGroupClass == MV_BOARD_MPP_GROUP_1)
+		return BOARD_INFO(boardId)->pBoardMppTypeValue[0].boardMppGroup1;
+	else
+		return BOARD_INFO(boardId)->pBoardMppTypeValue[0].boardMppGroup2;
+}
+
+/*******************************************************************************
+* mvBoardMppGroupTypeSet 
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       mppGroupClass - MPP group number 0  for MPP[35:20] or 1 for MPP[49:36].
+*       mppGroupType - MPP group type for MPP[35:20] or for MPP[49:36].
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*
+*******************************************************************************/
+MV_VOID mvBoardMppGroupTypeSet(MV_BOARD_MPP_GROUP_CLASS mppGroupClass,
+						MV_BOARD_MPP_TYPE_CLASS mppGroupType)
+{
+	MV_U32 boardId;
+
+	boardId = mvBoardIdGet();
+
+	if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+	{
+		mvOsPrintf("mvBoardMppGet:Board unknown.\n");
+	}
+
+	if (mppGroupClass == MV_BOARD_MPP_GROUP_1)
+		BOARD_INFO(boardId)->pBoardMppTypeValue[0].boardMppGroup1 = mppGroupType;
+	else
+		BOARD_INFO(boardId)->pBoardMppTypeValue[0].boardMppGroup2 = mppGroupType;
+
+}
+
+/*******************************************************************************
+* mvBoardMppMuxSet - Update MPP mux
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*
+*******************************************************************************/
+MV_VOID mvBoardMppMuxSet(MV_VOID)
+{
+
+	MV_BOARD_MPP_GROUP_CLASS devClass;
+	MV_BOARD_MPP_TYPE_CLASS mppGroupType;
+	MV_U32 devId;
+	MV_U8 muxVal = 0xf;
+	MV_U32 maxMppGrp = 1;
+    MV_TWSI_SLAVE twsiSlave;
+	MV_TWSI_ADDR slave;
+	
+	devId = mvCtrlModelGet();
+
+	switch(devId){
+		case MV_6281_DEV_ID:
+			maxMppGrp = MV_6281_MPP_MAX_MODULE;
+			break;
+		case MV_6192_DEV_ID:
+			maxMppGrp = MV_6192_MPP_MAX_MODULE;
+			break;
+        case MV_6190_DEV_ID:
+            maxMppGrp = MV_6190_MPP_MAX_MODULE;
+            break;
+		case MV_6180_DEV_ID:
+			maxMppGrp = MV_6180_MPP_MAX_MODULE;
+			break;		
+	}
+
+	for (devClass = 0; devClass < maxMppGrp; devClass++)
+	{
+		mppGroupType = mvBoardMppGroupTypeGet(devClass);
+
+		switch(mppGroupType)
+		{
+			case MV_BOARD_TDM:
+				muxVal &= ~(devClass ? (0x2 << (devClass * 2)):0x0);
+				break;
+			case MV_BOARD_AUDIO:
+				 muxVal &= ~(devClass ? 0x7 : 0x0); /*old Z0 value 0xd:0x0*/
+				break;
+			case MV_BOARD_TS:
+				 muxVal &= ~(devClass ? (0x2 << (devClass * 2)):0x0);
+				break;
+			default:
+				muxVal |= (devClass ? 0xf : 0);
+				break;
+		}
+	}
+
+	/* TWSI init */    	
+	slave.type = ADDR7_BIT;
+	slave.address = 0;
+	mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0);
+
+	/* Read MPP module ID */
+    	DB(mvOsPrintf("Board: twsi exp set\n"));
+    	twsiSlave.slaveAddr.address = mvBoardTwsiExpAddrGet(MV_BOARD_MUX_I2C_ADDR_ENTRY);
+    	twsiSlave.slaveAddr.type = mvBoardTwsiExpAddrTypeGet(MV_BOARD_MUX_I2C_ADDR_ENTRY);
+    	twsiSlave.validOffset = MV_TRUE;
+	/* Offset is the first command after the address which indicate the register number to be read 
+	   in next operation */
+    	twsiSlave.offset = 2;
+    	twsiSlave.moreThen256 = MV_FALSE;
+
+
+
+    	if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) )
+    	{
+    		DB(mvOsPrintf("Board: twsi exp out val fail\n"));
+        	return;
+    	}
+    	DB(mvOsPrintf("Board: twsi exp out val succeded\n"));
+    	
+	/* Change twsi exp to output */
+    	twsiSlave.offset = 6;
+	muxVal = 0;
+	if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) )
+    	{
+    		DB(mvOsPrintf("Board: twsi exp change to out fail\n"));
+        	return;
+    	}
+    	DB(mvOsPrintf("Board: twsi exp change to out succeded\n"));
+	
+}
+
+/*******************************************************************************
+* mvBoardTdmMppSet - set MPPs in TDM module
+*
+* DESCRIPTION:
+*
+* INPUT: type of second telephony device
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*
+*******************************************************************************/
+MV_VOID mvBoardTdmMppSet(MV_32 chType)
+{
+
+	MV_BOARD_MPP_GROUP_CLASS devClass;
+	MV_BOARD_MPP_TYPE_CLASS mppGroupType;
+	MV_U32 devId;
+	MV_U8 muxVal = 1;
+	MV_U8 muxValMask = 1;
+	MV_U8 twsiVal;
+	MV_U32 maxMppGrp = 1;
+    	MV_TWSI_SLAVE twsiSlave;
+	MV_TWSI_ADDR slave;
+	
+	devId = mvCtrlModelGet();
+
+	switch(devId){
+		case MV_6281_DEV_ID:
+			maxMppGrp = MV_6281_MPP_MAX_MODULE;
+			break;
+		case MV_6192_DEV_ID:
+			maxMppGrp = MV_6192_MPP_MAX_MODULE;
+			break;
+        case MV_6190_DEV_ID:
+            maxMppGrp = MV_6190_MPP_MAX_MODULE;
+            break;
+		case MV_6180_DEV_ID:
+			maxMppGrp = MV_6180_MPP_MAX_MODULE;
+			break;		
+	}
+
+	for (devClass = 0; devClass < maxMppGrp; devClass++)
+	{
+		mppGroupType = mvBoardMppGroupTypeGet(devClass);
+		if(mppGroupType == MV_BOARD_TDM)
+			break;
+	}
+
+	if(devClass == maxMppGrp)
+		return;		/* TDM module not found */
+
+	/* TWSI init */    	
+	slave.type = ADDR7_BIT;
+	slave.address = 0;
+	mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0);
+
+	/* Read MPP module ID */
+    	DB(mvOsPrintf("Board: twsi exp set\n"));
+    	twsiSlave.slaveAddr.address = mvBoardTwsiExpAddrGet(devClass);
+    	twsiSlave.slaveAddr.type = ADDR7_BIT;
+    	twsiSlave.validOffset = MV_TRUE;
+	/* Offset is the first command after the address which indicate the register number to be read 
+	   in next operation */
+    	twsiSlave.offset = 3;
+    	twsiSlave.moreThen256 = MV_FALSE;
+
+	if(mvBoardIdGet() == RD_88F6281A_ID)
+	{
+		muxVal = 0xc;
+		muxValMask = 0xf3;
+	}
+
+	mvTwsiRead(0, &twsiSlave, &twsiVal, 1);
+        muxVal = (twsiVal & muxValMask) | muxVal;
+
+    	if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) )
+    	{
+    		mvOsPrintf("Board: twsi exp out val fail\n");
+        	return;
+    	}
+    	DB(mvOsPrintf("Board: twsi exp out val succeded\n"));
+    	
+	/* Change twsi exp to output */
+    	twsiSlave.offset = 7;
+	muxVal = 0xfe;
+	if(mvBoardIdGet() == RD_88F6281A_ID)
+		muxVal = 0xf3;
+
+	mvTwsiRead(0, &twsiSlave, &twsiVal, 1);
+	muxVal = (twsiVal & muxVal);
+
+	if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) )
+    	{
+    		mvOsPrintf("Board: twsi exp change to out fail\n");
+        	return;
+    	}
+    	DB(mvOsPrintf("Board: twsi exp change to out succeded\n"));
+	/* reset the line to 0 */
+    	twsiSlave.offset = 3;
+	muxVal = 0;
+	muxValMask = 1;
+
+	if(mvBoardIdGet() == RD_88F6281A_ID) {
+		muxVal = 0x0;
+		muxValMask = 0xf3;
+	}
+
+	mvTwsiRead(0, &twsiSlave, &twsiVal, 1);
+        muxVal = (twsiVal & muxValMask) | muxVal;
+
+    	if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) )
+    	{
+    		mvOsPrintf("Board: twsi exp out val fail\n");
+        	return;
+    	}
+    	DB(mvOsPrintf("Board: twsi exp out val succeded\n"));
+
+	mvOsDelay(20);
+
+	/* set the line to 1 */
+    	twsiSlave.offset = 3;
+	muxVal = 1;
+	muxValMask = 1;
+
+	if(mvBoardIdGet() == RD_88F6281A_ID)
+	{
+		muxVal = 0xc;
+		muxValMask = 0xf3;
+		if(chType) /* FXS - issue reset properly */
+		{
+			MV_REG_BIT_SET(GPP_DATA_OUT_REG(1), MV_GPP12);
+			mvOsDelay(50);
+			MV_REG_BIT_RESET(GPP_DATA_OUT_REG(1), MV_GPP12);
+		}
+		else /* FXO - issue reset via TDM_CODEC_RST*/
+		{
+		   /* change MPP44 type to TDM_CODEC_RST(0x2) */
+		   MV_REG_WRITE(MPP_CONTROL_REG5, ((MV_REG_READ(MPP_CONTROL_REG5) & 0xFFF0FFFF)  | BIT17));	
+		}	
+	}
+
+	mvTwsiRead(0, &twsiSlave, &twsiVal, 1);
+        muxVal = (twsiVal & muxValMask) | muxVal;
+
+    	if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) )
+    	{
+    		mvOsPrintf("Board: twsi exp out val fail\n");
+        	return;
+    	}
+
+	/* TBD - 5 channels */
+#if defined(MV_TDM_5CHANNELS)
+	/* change MPP38 type to GPIO(0x0) & polarity for TDM_STROBE */
+	MV_REG_WRITE(MPP_CONTROL_REG4, (MV_REG_READ(MPP_CONTROL_REG4) & 0xF0FFFFFF));
+	mvGppPolaritySet(1, MV_GPP6, 0);
+	
+	twsiSlave.offset = 6;
+	twsiSlave.slaveAddr.address = mvBoardTwsiExpAddrGet(2);
+
+	mvTwsiRead(0, &twsiSlave, &twsiVal, 1);
+	muxVal = (twsiVal & ~BIT2);
+
+	if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) )
+    	{
+    		mvOsPrintf("Board: twsi exp change to out fail\n");
+        	return;
+    	}
+
+
+	twsiSlave.offset = 2;
+
+	mvTwsiRead(0, &twsiSlave, &twsiVal, 1);
+	muxVal = (twsiVal & ~BIT2);
+
+	if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) )
+    	{
+    		mvOsPrintf("Board: twsi exp change to out fail\n");
+        	return;
+    	}
+#endif
+    	DB(mvOsPrintf("Board: twsi exp out val succeded\n"));
+
+	
+}
+/*******************************************************************************
+* mvBoardVoiceConnModeGet - return SLIC/DAA connection & interrupt modes  
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*
+*******************************************************************************/
+
+MV_VOID mvBoardVoiceConnModeGet(MV_32* connMode, MV_32* irqMode)
+{
+	switch(mvBoardIdGet())
+	{
+		case RD_88F6281A_ID:
+			*connMode = DAISY_CHAIN_MODE;
+			*irqMode = INTERRUPT_TO_TDM;
+			break;
+		case DB_88F6281A_BP_ID:
+			 *connMode = DUAL_CHIP_SELECT_MODE;
+			 *irqMode = INTERRUPT_TO_TDM;
+			break;
+		case RD_88F6192A_ID:
+			*connMode = DUAL_CHIP_SELECT_MODE;
+			*irqMode = INTERRUPT_TO_TDM;
+			break;
+		case DB_88F6192A_BP_ID:
+			 *connMode = DUAL_CHIP_SELECT_MODE;
+			 *irqMode = INTERRUPT_TO_TDM;
+			break;
+		default:
+			*connMode = *irqMode = -1;
+			mvOsPrintf("mvBoardVoiceAssembleModeGet: TDM not supported(boardId=0x%x)\n",mvBoardIdGet());
+	}
+		return;
+	
+}
+
+/*******************************************************************************
+* mvBoardMppModuleTypePrint - print module detect
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*
+*******************************************************************************/
+MV_VOID mvBoardMppModuleTypePrint(MV_VOID)
+{
+
+	MV_BOARD_MPP_GROUP_CLASS devClass;
+	MV_BOARD_MPP_TYPE_CLASS mppGroupType;
+	MV_U32 devId;
+	MV_U32 maxMppGrp = 1;
+	
+	devId = mvCtrlModelGet();
+
+	switch(devId){
+		case MV_6281_DEV_ID:
+			maxMppGrp = MV_6281_MPP_MAX_MODULE;
+			break;
+		case MV_6192_DEV_ID:
+			maxMppGrp = MV_6192_MPP_MAX_MODULE;
+			break;
+        case MV_6190_DEV_ID:
+            maxMppGrp = MV_6190_MPP_MAX_MODULE;
+            break;
+		case MV_6180_DEV_ID:
+			maxMppGrp = MV_6180_MPP_MAX_MODULE;
+			break;		
+	}
+
+	for (devClass = 0; devClass < maxMppGrp; devClass++)
+	{
+		mppGroupType = mvBoardMppGroupTypeGet(devClass);
+
+		switch(mppGroupType)
+		{
+			case MV_BOARD_TDM:
+                if(devId != MV_6190_DEV_ID)
+                    mvOsPrintf("Module %d is TDM\n", devClass);
+				break;
+			case MV_BOARD_AUDIO:
+                if(devId != MV_6190_DEV_ID)
+                    mvOsPrintf("Module %d is AUDIO\n", devClass);
+				break;
+            case MV_BOARD_RGMII:
+                if(devId != MV_6190_DEV_ID)
+                    mvOsPrintf("Module %d is RGMII\n", devClass);
+				break;
+			case MV_BOARD_GMII:
+                if(devId != MV_6190_DEV_ID)
+                    mvOsPrintf("Module %d is GMII\n", devClass);
+				break;
+			case MV_BOARD_TS:
+                if(devId != MV_6190_DEV_ID)
+                    mvOsPrintf("Module %d is TS\n", devClass);
+				break;
+			default:
+				break;
+		}
+	}
+}
+
+/* Board devices API managments */
+
+/*******************************************************************************
+* mvBoardGetDeviceNumber - Get number of device of some type on the board
+*
+* DESCRIPTION:
+*
+* INPUT:
+*		devType - The device type ( Flash,RTC , etc .. )
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       If the device is found on the board the then the functions returns the
+*		number of those devices else the function returns 0
+*
+*
+*******************************************************************************/
+MV_32 mvBoardGetDevicesNumber(MV_BOARD_DEV_CLASS devClass)
+{
+	MV_U32	foundIndex=0,devNum;
+	MV_U32 boardId= mvBoardIdGet();
+
+	if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+	{
+		mvOsPrintf("mvBoardGetDeviceNumber:Board unknown.\n");
+		return 0xFFFFFFFF;
+
+	}
+
+	for (devNum = START_DEV_CS; devNum < BOARD_INFO(boardId)->numBoardDeviceIf; devNum++)
+	{
+		if (BOARD_INFO(boardId)->pDevCsInfo[devNum].devClass == devClass)
+		{
+			foundIndex++;
+		}
+	}
+
+    return foundIndex;
+
+}
+
+/*******************************************************************************
+* mvBoardGetDeviceBaseAddr - Get base address of a device existing on the board
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       devIndex - The device sequential number on the board
+*		devType - The device type ( Flash,RTC , etc .. )
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       If the device is found on the board the then the functions returns the
+*		Base address else the function returns 0xffffffff
+*
+*
+*******************************************************************************/
+MV_32 mvBoardGetDeviceBaseAddr(MV_32 devNum, MV_BOARD_DEV_CLASS devClass)
+{
+	MV_DEV_CS_INFO* devEntry;
+	devEntry = boardGetDevEntry(devNum,devClass);
+	if (devEntry != NULL)
+	{
+		return mvCpuIfTargetWinBaseLowGet(DEV_TO_TARGET(devEntry->deviceCS));
+
+	}
+
+	return 0xFFFFFFFF;
+}
+
+/*******************************************************************************
+* mvBoardGetDeviceBusWidth - Get Bus width of a device existing on the board
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       devIndex - The device sequential number on the board
+*		devType - The device type ( Flash,RTC , etc .. )
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       If the device is found on the board the then the functions returns the
+*		Bus width else the function returns 0xffffffff
+*
+*
+*******************************************************************************/
+MV_32 mvBoardGetDeviceBusWidth(MV_32 devNum, MV_BOARD_DEV_CLASS devClass)
+{
+	MV_DEV_CS_INFO* devEntry;
+
+	devEntry = boardGetDevEntry(devNum,devClass);
+	if (devEntry != NULL)
+	{
+		return 8; 
+	}
+
+	return 0xFFFFFFFF;
+
+}
+
+/*******************************************************************************
+* mvBoardGetDeviceWidth - Get dev width of a device existing on the board
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       devIndex - The device sequential number on the board
+*		devType - The device type ( Flash,RTC , etc .. )
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       If the device is found on the board the then the functions returns the
+*		dev width else the function returns 0xffffffff
+*
+*
+*******************************************************************************/
+MV_32 mvBoardGetDeviceWidth(MV_32 devNum, MV_BOARD_DEV_CLASS devClass)
+{
+	MV_DEV_CS_INFO* devEntry;
+	MV_U32 boardId= mvBoardIdGet();
+
+	if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+	{
+		mvOsPrintf("Board unknown.\n");
+		return 0xFFFFFFFF;
+	}
+
+	devEntry = boardGetDevEntry(devNum,devClass);
+	if (devEntry != NULL)
+		return devEntry->devWidth;
+
+	return MV_ERROR;
+
+}
+
+/*******************************************************************************
+* mvBoardGetDeviceWinSize - Get the window size of a device existing on the board
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       devIndex - The device sequential number on the board
+*		devType - The device type ( Flash,RTC , etc .. )
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       If the device is found on the board the then the functions returns the
+*		window size else the function returns 0xffffffff
+*
+*
+*******************************************************************************/
+MV_32 mvBoardGetDeviceWinSize(MV_32 devNum, MV_BOARD_DEV_CLASS devClass)
+{
+	MV_DEV_CS_INFO* devEntry;
+	MV_U32 boardId = mvBoardIdGet();
+
+	if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+	{
+		mvOsPrintf("Board unknown.\n");
+		return 0xFFFFFFFF;
+	}
+
+	devEntry = boardGetDevEntry(devNum,devClass);
+	if (devEntry != NULL)
+	{
+		return mvCpuIfTargetWinSizeGet(DEV_TO_TARGET(devEntry->deviceCS));
+	}
+
+	return 0xFFFFFFFF;
+}
+
+
+/*******************************************************************************
+* boardGetDevEntry - returns the entry pointer of a device on the board
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       devIndex - The device sequential number on the board
+*		devType - The device type ( Flash,RTC , etc .. )
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       If the device is found on the board the then the functions returns the
+*		dev number else the function returns 0x0
+*
+*
+*******************************************************************************/
+static MV_DEV_CS_INFO*  boardGetDevEntry(MV_32 devNum, MV_BOARD_DEV_CLASS devClass)
+{
+	MV_U32	foundIndex=0,devIndex;
+	MV_U32 boardId= mvBoardIdGet();
+
+	if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+	{
+		mvOsPrintf("boardGetDevEntry: Board unknown.\n");
+		return NULL;
+
+	}
+
+	for (devIndex = START_DEV_CS; devIndex < BOARD_INFO(boardId)->numBoardDeviceIf; devIndex++)
+	{
+		/* TBR */
+		/*if (BOARD_INFO(boardId)->pDevCsInfo[devIndex].deviceCS == MV_BOOTDEVICE_INDEX)
+		     continue;*/
+
+		if (BOARD_INFO(boardId)->pDevCsInfo[devIndex].devClass == devClass)
+		{
+            		if (foundIndex == devNum)
+			{
+				return &(BOARD_INFO(boardId)->pDevCsInfo[devIndex]);
+			}
+			foundIndex++;
+		}
+	}
+
+	/* device not found */
+	return NULL;
+}
+
+/* Get device CS number */
+
+MV_U32 boardGetDevCSNum(MV_32 devNum, MV_BOARD_DEV_CLASS devClass)
+{
+	MV_DEV_CS_INFO* devEntry;
+	MV_U32 boardId= mvBoardIdGet();
+
+	if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID)))
+	{
+		mvOsPrintf("Board unknown.\n");
+		return 0xFFFFFFFF;
+
+	}
+
+
+	devEntry = boardGetDevEntry(devNum,devClass);
+	if (devEntry != NULL)
+		return devEntry->deviceCS;
+
+	return 0xFFFFFFFF;
+
+}
+
+/*******************************************************************************
+* mvBoardRtcTwsiAddrTypeGet -
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*
+*
+*******************************************************************************/
+MV_U8 mvBoardRtcTwsiAddrTypeGet()
+{
+	int i;
+	MV_U32 boardId= mvBoardIdGet();
+
+	for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++)
+		if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_TWSI_RTC)
+			return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddrType;
+	return (MV_ERROR);
+}
+
+/*******************************************************************************
+* mvBoardRtcTwsiAddrGet -
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*
+*
+*******************************************************************************/
+MV_U8 mvBoardRtcTwsiAddrGet()
+{
+	int i;
+	MV_U32 boardId= mvBoardIdGet();
+
+	for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++)
+		if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_TWSI_RTC)
+			return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddr;
+	return (0xFF);
+}
+
+/*******************************************************************************
+* mvBoardA2DTwsiAddrTypeGet -
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*
+*
+*******************************************************************************/
+MV_U8 mvBoardA2DTwsiAddrTypeGet()
+{
+	int i;
+	MV_U32 boardId= mvBoardIdGet();
+
+	for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++)
+		if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_TWSI_AUDIO_DEC)
+			return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddrType;
+	return (MV_ERROR);
+}
+
+/*******************************************************************************
+* mvBoardA2DTwsiAddrGet -
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*
+*
+*******************************************************************************/
+MV_U8 mvBoardA2DTwsiAddrGet()
+{
+	int i;
+	MV_U32 boardId= mvBoardIdGet();
+
+	for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++)
+		if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_TWSI_AUDIO_DEC)
+			return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddr;
+	return (0xFF);
+}
+
+/*******************************************************************************
+* mvBoardTwsiExpAddrTypeGet -
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*
+*
+*******************************************************************************/
+MV_U8 mvBoardTwsiExpAddrTypeGet(MV_U32 index)
+{
+	int i;
+	MV_U32 indexFound = 0;
+	MV_U32 boardId= mvBoardIdGet();
+
+	for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++)
+		if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_DEV_TWSI_EXP)
+		{
+			if (indexFound == index)
+				return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddrType;
+			else
+				indexFound++;
+		}
+
+	return (MV_ERROR);
+}
+
+/*******************************************************************************
+* mvBoardTwsiExpAddrGet -
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*
+*
+*******************************************************************************/
+MV_U8 mvBoardTwsiExpAddrGet(MV_U32 index)
+{
+	int i;
+	MV_U32 indexFound = 0;
+	MV_U32 boardId= mvBoardIdGet();
+
+	for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++)
+		if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_DEV_TWSI_EXP)
+		{
+			if (indexFound == index)
+				return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddr;
+			else
+				indexFound++;
+		}
+
+	return (0xFF);
+}
+
+
+/*******************************************************************************
+* mvBoardTwsiSatRAddrTypeGet -
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*
+*
+*******************************************************************************/
+MV_U8 mvBoardTwsiSatRAddrTypeGet(MV_U32 index)
+{
+	int i;
+	MV_U32 indexFound = 0;
+	MV_U32 boardId= mvBoardIdGet();
+
+	for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++)
+		if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_DEV_TWSI_SATR)
+		{
+			if (indexFound == index)
+				return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddrType;
+			else
+				indexFound++;
+		}
+
+	return (MV_ERROR);
+}
+
+/*******************************************************************************
+* mvBoardTwsiSatRAddrGet -
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*
+*
+*******************************************************************************/
+MV_U8 mvBoardTwsiSatRAddrGet(MV_U32 index)
+{
+	int i;
+	MV_U32 indexFound = 0;
+	MV_U32 boardId= mvBoardIdGet();
+
+	for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++)
+		if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_DEV_TWSI_SATR)
+		{
+			if (indexFound == index)
+				return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddr;
+			else
+				indexFound++;
+		}
+
+	return (0xFF);
+}
+
+/*******************************************************************************
+* mvBoardNandWidthGet -
+*
+* DESCRIPTION: Get the width of the first NAND device in byte.
+*
+* INPUT:
+*
+* OUTPUT:
+*       None.
+*
+* RETURN: 1, 2, 4 or MV_ERROR
+*
+*
+*******************************************************************************/
+/*  */
+MV_32 mvBoardNandWidthGet(void)
+{
+	MV_U32 devNum;
+	MV_U32 devWidth;
+	MV_U32 boardId= mvBoardIdGet();
+
+	for (devNum = START_DEV_CS; devNum < BOARD_INFO(boardId)->numBoardDeviceIf; devNum++)
+	{
+		devWidth = mvBoardGetDeviceWidth(devNum, BOARD_DEV_NAND_FLASH);
+		if (devWidth != MV_ERROR)
+			return (devWidth / 8);
+	}
+		
+	/* NAND wasn't found */
+	return MV_ERROR;
+}
+
+MV_U32 gBoardId = -1;
+
+/*******************************************************************************
+* mvBoardIdGet - Get Board model
+*
+* DESCRIPTION:
+*       This function returns board ID.
+*       Board ID is 32bit word constructed of board model (16bit) and
+*       board revision (16bit) in the following way: 0xMMMMRRRR.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       32bit board ID number, '-1' if board is undefined.
+*
+*******************************************************************************/
+MV_U32 mvBoardIdGet(MV_VOID)
+{
+	MV_U32 tmpBoardId = -1;
+
+	if(gBoardId == -1)
+        {
+		#if defined(DB_88F6281A)
+		tmpBoardId = DB_88F6281A_BP_ID;
+		#elif defined(RD_88F6281A)
+		tmpBoardId = RD_88F6281A_ID;
+		#elif defined(DB_88F6192A)
+		tmpBoardId = DB_88F6192A_BP_ID;
+		#elif defined(DB_88F6190A)
+		tmpBoardId = DB_88F6190A_BP_ID;
+		#elif defined(RD_88F6192A)
+		tmpBoardId = RD_88F6192A_ID;
+		#elif defined(RD_88F6190A)
+		tmpBoardId = RD_88F6190A_ID;
+		#elif defined(DB_88F6180A)
+		tmpBoardId = DB_88F6180A_BP_ID;
+		#elif defined(RD_88F6281A_PCAC)
+		tmpBoardId = RD_88F6281A_PCAC_ID;
+		#elif defined(RD_88F6281A_SHEEVA_PLUG)
+		tmpBoardId = SHEEVA_PLUG_ID;
+		#elif defined(DB_CUSTOMER)
+		tmpBoardId = DB_CUSTOMER_ID;
+		#endif
+		gBoardId = tmpBoardId;
+	}
+
+	return gBoardId;
+}
+
+
+/*******************************************************************************
+* mvBoarModuleTypeGet - mvBoarModuleTypeGet
+*
+* DESCRIPTION:
+*
+* INPUT:
+*		group num - MV_BOARD_MPP_GROUP_CLASS enum
+*
+* OUTPUT:
+*		None.
+*
+* RETURN:
+*		module num - MV_BOARD_MODULE_CLASS enum
+*
+*******************************************************************************/
+MV_BOARD_MODULE_ID_CLASS mvBoarModuleTypeGet(MV_BOARD_MPP_GROUP_CLASS devClass)
+{
+    	MV_TWSI_SLAVE twsiSlave;
+	MV_TWSI_ADDR slave;
+    	MV_U8 data;
+
+	/* TWSI init */    	
+	slave.type = ADDR7_BIT;
+	slave.address = 0;
+	mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0);
+
+    	/* Read MPP module ID */
+    	DB(mvOsPrintf("Board: Read MPP module ID\n"));
+    	twsiSlave.slaveAddr.address = mvBoardTwsiExpAddrGet(devClass);
+    	twsiSlave.slaveAddr.type = mvBoardTwsiExpAddrTypeGet(devClass);
+    	twsiSlave.validOffset = MV_TRUE;
+	/* Offset is the first command after the address which indicate the register number to be read 
+	   in next operation */
+    	twsiSlave.offset = 0;
+    	twsiSlave.moreThen256 = MV_FALSE;
+
+
+
+    	if( MV_OK != mvTwsiRead (0, &twsiSlave, &data, 1) )
+    	{
+    		DB(mvOsPrintf("Board: Read MPP module ID fail\n"));
+        	return MV_ERROR;
+    	}
+    	DB(mvOsPrintf("Board: Read MPP module ID succeded\n"));
+	
+	return data;
+}
+
+/*******************************************************************************
+* mvBoarTwsiSatRGet - 
+*
+* DESCRIPTION:
+*
+* INPUT:
+*		device num - one of three devices
+*		reg num - 0 or 1
+*
+* OUTPUT:
+*		None.
+*
+* RETURN:
+*		reg value
+*
+*******************************************************************************/
+MV_U8 mvBoarTwsiSatRGet(MV_U8 devNum, MV_U8 regNum)
+{
+    	MV_TWSI_SLAVE twsiSlave;
+	MV_TWSI_ADDR slave;
+    	MV_U8 data;
+
+	/* TWSI init */    	
+	slave.type = ADDR7_BIT;
+	slave.address = 0;
+	mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0);
+
+    	/* Read MPP module ID */
+    	DB(mvOsPrintf("Board: Read S@R device read\n"));
+    	twsiSlave.slaveAddr.address = mvBoardTwsiSatRAddrGet(devNum);
+    	twsiSlave.slaveAddr.type = mvBoardTwsiSatRAddrTypeGet(devNum);
+    	twsiSlave.validOffset = MV_TRUE;
+	/* Use offset as command */
+    	twsiSlave.offset = regNum;
+    	twsiSlave.moreThen256 = MV_FALSE;
+
+    	if( MV_OK != mvTwsiRead (0, &twsiSlave, &data, 1) )
+    	{
+    		DB(mvOsPrintf("Board: Read S@R fail\n"));
+        	return MV_ERROR;
+    	}
+    	DB(mvOsPrintf("Board: Read S@R succeded\n"));
+	
+	return data;
+}
+
+/*******************************************************************************
+* mvBoarTwsiSatRSet - 
+*
+* DESCRIPTION:
+*
+* INPUT:
+*		devNum - one of three devices
+*		regNum - 0 or 1
+*		regVal - value
+*
+*
+* OUTPUT:
+*		None.
+*
+* RETURN:
+*		reg value
+*
+*******************************************************************************/
+MV_STATUS mvBoarTwsiSatRSet(MV_U8 devNum, MV_U8 regNum, MV_U8 regVal)
+{
+    	MV_TWSI_SLAVE twsiSlave;
+	MV_TWSI_ADDR slave;
+	
+	/* TWSI init */    	
+	slave.type = ADDR7_BIT;
+	slave.address = 0;
+	mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0);
+
+    	/* Read MPP module ID */
+    	twsiSlave.slaveAddr.address = mvBoardTwsiSatRAddrGet(devNum);
+    	twsiSlave.slaveAddr.type = mvBoardTwsiSatRAddrTypeGet(devNum);
+    	twsiSlave.validOffset = MV_TRUE;
+    	DB(mvOsPrintf("Board: Write S@R device addr %x, type %x, data %x\n", twsiSlave.slaveAddr.address,\
+								twsiSlave.slaveAddr.type, regVal));
+	/* Use offset as command */
+    	twsiSlave.offset = regNum;
+    	twsiSlave.moreThen256 = MV_FALSE;
+    	if( MV_OK != mvTwsiWrite (0, &twsiSlave, &regVal, 1) )
+    	{
+    		DB(mvOsPrintf("Board: Write S@R fail\n"));
+        	return MV_ERROR;
+    	}
+    	DB(mvOsPrintf("Board: Write S@R succeded\n"));
+	
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvBoardSlicGpioPinGet -
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*
+*
+*******************************************************************************/
+MV_32 mvBoardSlicGpioPinGet(MV_U32 slicNum)
+{
+	MV_U32 boardId;
+	boardId = mvBoardIdGet();
+
+	switch (boardId)
+	{
+	case DB_88F6281A_BP_ID:
+	case RD_88F6281A_ID:
+	default:
+		return MV_ERROR;
+		break;
+
+	}
+}
+
+/*******************************************************************************
+* mvBoardFanPowerControl - Turn on/off the fan power control on the RD-6281A
+*
+* DESCRIPTION:
+*
+* INPUT:
+*        mode - MV_TRUE = on ; MV_FALSE = off
+*
+* OUTPUT:
+*       MV_STATUS - MV_OK , MV_ERROR.
+*
+* RETURN:
+*
+*******************************************************************************/
+MV_STATUS mvBoardFanPowerControl(MV_BOOL mode)
+{
+
+	MV_U8 val = 1, twsiVal;
+   	MV_TWSI_SLAVE twsiSlave;
+	MV_TWSI_ADDR slave;
+	
+	if(mvBoardIdGet() != RD_88F6281A_ID)
+        return MV_ERROR;
+
+	/* TWSI init */    	
+	slave.type = ADDR7_BIT;
+	slave.address = 0;
+	mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0);
+
+	/* Read MPP module ID */
+    	DB(mvOsPrintf("Board: twsi exp set\n"));
+    	twsiSlave.slaveAddr.address = mvBoardTwsiExpAddrGet(1);
+    	twsiSlave.slaveAddr.type = ADDR7_BIT;
+    	twsiSlave.validOffset = MV_TRUE;
+	/* Offset is the first command after the address which indicate the register number to be read 
+	   in next operation */
+    	twsiSlave.offset = 3;
+    	twsiSlave.moreThen256 = MV_FALSE;
+        if(mode == MV_TRUE)
+            val = 0x1;
+        else
+            val = 0;
+        mvTwsiRead(0, &twsiSlave, &twsiVal, 1);
+        val = (twsiVal & 0xfe) | val;
+
+        if( MV_OK != mvTwsiWrite (0, &twsiSlave, &val, 1) )
+    	{
+    		DB(mvOsPrintf("Board: twsi exp out val fail\n"));
+        	return MV_ERROR;
+    	}
+    	DB(mvOsPrintf("Board: twsi exp out val succeded\n"));
+    	
+	/* Change twsi exp to output */
+    	twsiSlave.offset = 7;
+        mvTwsiRead(0, &twsiSlave, &twsiVal, 1);
+        val = (twsiVal & 0xfe);
+    	if( MV_OK != mvTwsiWrite (0, &twsiSlave, &val, 1) )
+    	{
+    		DB(mvOsPrintf("Board: twsi exp change to out fail\n"));
+        	return MV_ERROR;
+    	}
+    	DB(mvOsPrintf("Board: twsi exp change to out succeded\n"));
+        return MV_OK;
+}
+
+/*******************************************************************************
+* mvBoardHDDPowerControl - Turn on/off the HDD power control on the RD-6281A
+*
+* DESCRIPTION:
+*
+* INPUT:
+*        mode - MV_TRUE = on ; MV_FALSE = off
+*
+* OUTPUT:
+*       MV_STATUS - MV_OK , MV_ERROR.
+*
+* RETURN:
+*
+*******************************************************************************/
+MV_STATUS mvBoardHDDPowerControl(MV_BOOL mode)
+{
+
+	MV_U8 val = 1, twsiVal;
+   	MV_TWSI_SLAVE twsiSlave;
+	MV_TWSI_ADDR slave;
+	
+	if(mvBoardIdGet() != RD_88F6281A_ID)
+        return MV_ERROR;
+
+	/* TWSI init */    	
+	slave.type = ADDR7_BIT;
+	slave.address = 0;
+	mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0);
+
+	/* Read MPP module ID */
+    	DB(mvOsPrintf("Board: twsi exp set\n"));
+    	twsiSlave.slaveAddr.address = mvBoardTwsiExpAddrGet(1);
+    	twsiSlave.slaveAddr.type = ADDR7_BIT;
+    	twsiSlave.validOffset = MV_TRUE;
+	/* Offset is the first command after the address which indicate the register number to be read 
+	   in next operation */
+    	twsiSlave.offset = 3;
+    	twsiSlave.moreThen256 = MV_FALSE;
+        if(mode == MV_TRUE)
+            val = 0x2;
+        else
+            val = 0;
+        mvTwsiRead(0, &twsiSlave, &twsiVal, 1);
+        val = (twsiVal & 0xfd) | val;
+    	if( MV_OK != mvTwsiWrite (0, &twsiSlave, &val, 1) )
+    	{
+    		DB(mvOsPrintf("Board: twsi exp out val fail\n"));
+        	return MV_ERROR;
+    	}
+    	DB(mvOsPrintf("Board: twsi exp out val succeded\n"));
+    	
+	/* Change twsi exp to output */
+    	twsiSlave.offset = 7;
+        mvTwsiRead(0, &twsiSlave, &twsiVal, 1);
+        val = (twsiVal & 0xfd);
+    	if( MV_OK != mvTwsiWrite (0, &twsiSlave, &val, 1) )
+    	{
+    		DB(mvOsPrintf("Board: twsi exp change to out fail\n"));
+        	return MV_ERROR;
+    	}
+    	DB(mvOsPrintf("Board: twsi exp change to out succeded\n"));
+        return MV_OK;
+}
+
+/*******************************************************************************
+* mvBoardSDioWPControl - Turn on/off the SDIO WP on the RD-6281A
+*
+* DESCRIPTION:
+*
+* INPUT:
+*        mode - MV_TRUE = on ; MV_FALSE = off
+*
+* OUTPUT:
+*       MV_STATUS - MV_OK , MV_ERROR.
+*
+* RETURN:
+*
+*******************************************************************************/
+MV_STATUS mvBoardSDioWPControl(MV_BOOL mode)
+{
+
+	MV_U8 val = 1, twsiVal;
+   	MV_TWSI_SLAVE twsiSlave;
+	MV_TWSI_ADDR slave;
+	
+	if(mvBoardIdGet() != RD_88F6281A_ID)
+        return MV_ERROR;
+
+	/* TWSI init */    	
+	slave.type = ADDR7_BIT;
+	slave.address = 0;
+	mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0);
+
+	/* Read MPP module ID */
+    	DB(mvOsPrintf("Board: twsi exp set\n"));
+    	twsiSlave.slaveAddr.address = mvBoardTwsiExpAddrGet(0);
+    	twsiSlave.slaveAddr.type = ADDR7_BIT;
+    	twsiSlave.validOffset = MV_TRUE;
+	/* Offset is the first command after the address which indicate the register number to be read 
+	   in next operation */
+    	twsiSlave.offset = 3;
+    	twsiSlave.moreThen256 = MV_FALSE;
+        if(mode == MV_TRUE)
+            val = 0x10;
+        else
+            val = 0;
+        mvTwsiRead(0, &twsiSlave, &twsiVal, 1);
+        val = (twsiVal & 0xef) | val;
+    	if( MV_OK != mvTwsiWrite (0, &twsiSlave, &val, 1) )
+    	{
+    		DB(mvOsPrintf("Board: twsi exp out val fail\n"));
+        	return MV_ERROR;
+    	}
+    	DB(mvOsPrintf("Board: twsi exp out val succeded\n"));
+    	
+	/* Change twsi exp to output */
+    	twsiSlave.offset = 7;
+        mvTwsiRead(0, &twsiSlave, &twsiVal, 1);
+        val = (twsiVal & 0xef);
+    	if( MV_OK != mvTwsiWrite (0, &twsiSlave, &val, 1) )
+    	{
+    		DB(mvOsPrintf("Board: twsi exp change to out fail\n"));
+        	return MV_ERROR;
+    	}
+    	DB(mvOsPrintf("Board: twsi exp change to out succeded\n"));
+        return MV_OK;
+}
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvLib.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvLib.h
new file mode 100644
index 0000000000..dead633695
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvLib.h
@@ -0,0 +1,376 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED.  The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer.
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    *   Neither the name of Marvell nor the names of its contributors may be
+        used to endorse or promote products derived from this software without
+        specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+#ifndef __INCmvBoardEnvLibh
+#define __INCmvBoardEnvLibh
+
+/* defines */
+/* The below constant macros defines the board I2C EEPROM data offsets */
+
+
+
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "mvSysHwConfig.h"
+#include "boardEnv/mvBoardEnvSpec.h"
+
+
+/* DUART stuff for Tclk detection only */
+#define DUART_BAUD_RATE			115200
+#define MAX_CLOCK_MARGINE		5000000	/* Maximum detected clock margine */
+
+/* Voice devices assembly modes */
+#define DAISY_CHAIN_MODE	1
+#define DUAL_CHIP_SELECT_MODE   0
+#define INTERRUPT_TO_MPP        1
+#define INTERRUPT_TO_TDM	0
+
+
+#define BOARD_ETH_PORT_NUM  MV_ETH_MAX_PORTS
+#define BOARD_ETH_SWITCH_PORT_NUM	5
+
+#define	MV_BOARD_MAX_USB_IF		1
+#define MV_BOARD_MAX_MPP		7
+#define MV_BOARD_NAME_LEN  		0x20
+
+typedef struct _boardData
+{
+   MV_U32 magic;
+   MV_U16 boardId;
+   MV_U8 boardVer;
+   MV_U8 boardRev;
+   MV_U32 reserved1;
+   MV_U32 reserved2;
+
+}BOARD_DATA;
+
+typedef enum _devBoardMppGroupClass
+{
+	MV_BOARD_MPP_GROUP_1,
+	MV_BOARD_MPP_GROUP_2,
+	MV_BOARD_MAX_MPP_GROUP
+}MV_BOARD_MPP_GROUP_CLASS;
+
+typedef enum _devBoardMppTypeClass
+{
+	MV_BOARD_AUTO,
+	MV_BOARD_TDM,
+	MV_BOARD_AUDIO,
+	MV_BOARD_RGMII,
+	MV_BOARD_GMII,
+	MV_BOARD_TS,
+	MV_BOARD_MII,
+	MV_BOARD_OTHER
+}MV_BOARD_MPP_TYPE_CLASS;
+
+typedef enum _devBoardModuleIdClass
+{
+	MV_BOARD_MODULE_TDM_ID = 1,
+	MV_BOARD_MODULE_AUDIO_ID,
+	MV_BOARD_MODULE_RGMII_ID,
+	MV_BOARD_MODULE_GMII_ID,
+	MV_BOARD_MODULE_TS_ID,
+	MV_BOARD_MODULE_MII_ID,
+	MV_BOARD_MODULE_TDM_5CHAN_ID,
+	MV_BOARD_MODULE_OTHER_ID
+}MV_BOARD_MODULE_ID_CLASS;
+
+typedef struct _boardMppTypeInfo
+{
+	MV_BOARD_MPP_TYPE_CLASS	boardMppGroup1;
+	MV_BOARD_MPP_TYPE_CLASS	boardMppGroup2;
+
+}MV_BOARD_MPP_TYPE_INFO;
+
+
+typedef enum _devBoardClass
+{
+	BOARD_DEV_NOR_FLASH,
+	BOARD_DEV_NAND_FLASH,
+	BOARD_DEV_SEVEN_SEG,
+	BOARD_DEV_FPGA,
+	BOARD_DEV_SRAM,
+	BOARD_DEV_SPI_FLASH,
+	BOARD_DEV_OTHER,
+}MV_BOARD_DEV_CLASS;
+
+typedef enum _devTwsiBoardClass
+{
+	BOARD_TWSI_RTC,
+	BOARD_DEV_TWSI_EXP,
+	BOARD_DEV_TWSI_SATR,
+	BOARD_TWSI_AUDIO_DEC,
+	BOARD_TWSI_OTHER
+}MV_BOARD_TWSI_CLASS;
+	
+typedef enum _devGppBoardClass
+{
+	BOARD_GPP_RTC,
+	BOARD_GPP_MV_SWITCH,
+	BOARD_GPP_USB_VBUS,
+	BOARD_GPP_USB_VBUS_EN,
+	BOARD_GPP_USB_OC,
+	BOARD_GPP_USB_HOST_DEVICE,
+	BOARD_GPP_REF_CLCK,
+	BOARD_GPP_VOIP_SLIC,
+	BOARD_GPP_LIFELINE,
+	BOARD_GPP_BUTTON,
+	BOARD_GPP_TS_BUTTON_C,
+	BOARD_GPP_TS_BUTTON_U,
+	BOARD_GPP_TS_BUTTON_D,
+	BOARD_GPP_TS_BUTTON_L,
+	BOARD_GPP_TS_BUTTON_R,
+	BOARD_GPP_POWER_BUTTON,
+	BOARD_GPP_RESTOR_BUTTON,
+	BOARD_GPP_WPS_BUTTON,
+	BOARD_GPP_HDD0_POWER,
+	BOARD_GPP_HDD1_POWER,
+	BOARD_GPP_FAN_POWER,
+	BOARD_GPP_RESET,
+	BOARD_GPP_POWER_ON_LED,
+	BOARD_GPP_HDD_POWER,
+    BOARD_GPP_SDIO_POWER,
+    BOARD_GPP_SDIO_DETECT,
+    BOARD_GPP_SDIO_WP,
+	BOARD_GPP_SWITCH_PHY_INT,
+	BOARD_GPP_TSU_DIRCTION,
+	BOARD_GPP_OTHER
+}MV_BOARD_GPP_CLASS;
+
+
+typedef struct _devCsInfo
+{
+    MV_U8		deviceCS;
+    MV_U32		params;
+    MV_U32		devClass;	/* MV_BOARD_DEV_CLASS */
+    MV_U8		devWidth;
+
+}MV_DEV_CS_INFO;
+
+
+#define MV_BOARD_PHY_FORCE_10MB		0x0
+#define MV_BOARD_PHY_FORCE_100MB	0x1
+#define MV_BOARD_PHY_FORCE_1000MB	0x2
+#define MV_BOARD_PHY_SPEED_AUTO		0x3
+
+typedef struct _boardSwitchInfo
+{
+	MV_32	linkStatusIrq;
+	MV_32	qdPort[BOARD_ETH_SWITCH_PORT_NUM];
+	MV_32	qdCpuPort;
+	MV_32	smiScanMode; /* 1 for SMI_MANUAL_MODE, 0 otherwise */
+	MV_32	switchOnPort;
+
+}MV_BOARD_SWITCH_INFO;
+
+typedef struct _boardLedInfo
+{
+	MV_U8	activeLedsNumber;
+	MV_U8	ledsPolarity;	/* '0' or '1' to turn on led */
+	MV_U8*	gppPinNum; 	/* Pointer to GPP values */
+
+}MV_BOARD_LED_INFO;
+
+typedef struct _boardGppInfo
+{
+	MV_BOARD_GPP_CLASS	devClass;
+	MV_U8	gppPinNum;
+
+}MV_BOARD_GPP_INFO;
+
+
+typedef struct _boardTwsiInfo
+{
+	MV_BOARD_TWSI_CLASS	devClass;
+	MV_U8	twsiDevAddr;
+	MV_U8	twsiDevAddrType;
+
+}MV_BOARD_TWSI_INFO;
+
+
+typedef enum _boardMacSpeed
+{
+	BOARD_MAC_SPEED_10M,
+	BOARD_MAC_SPEED_100M,
+	BOARD_MAC_SPEED_1000M,
+	BOARD_MAC_SPEED_AUTO,
+
+}MV_BOARD_MAC_SPEED;
+
+typedef struct _boardMacInfo
+{
+	MV_BOARD_MAC_SPEED	boardMacSpeed;
+	MV_U8	boardEthSmiAddr;
+
+}MV_BOARD_MAC_INFO;
+
+typedef struct _boardMppInfo
+{
+	MV_U32		mppGroup[MV_BOARD_MAX_MPP];
+
+}MV_BOARD_MPP_INFO;
+
+typedef struct _boardInfo
+{
+	char 			   	boardName[MV_BOARD_NAME_LEN];
+	MV_U8				numBoardMppTypeValue;
+	MV_BOARD_MPP_TYPE_INFO*		pBoardMppTypeValue;
+	MV_U8				numBoardMppConfigValue;
+	MV_BOARD_MPP_INFO*		pBoardMppConfigValue;
+    	MV_U32				intsGppMaskLow;
+	MV_U32				intsGppMaskHigh;
+	MV_U8				numBoardDeviceIf;
+    	MV_DEV_CS_INFO*			pDevCsInfo;
+	MV_U8				numBoardTwsiDev;
+	MV_BOARD_TWSI_INFO*		pBoardTwsiDev;
+	MV_U8				numBoardMacInfo;
+	MV_BOARD_MAC_INFO*		pBoardMacInfo;
+	MV_U8				numBoardGppInfo;
+	MV_BOARD_GPP_INFO*		pBoardGppInfo;
+    	MV_U8				activeLedsNumber;
+	MV_U8*				pLedGppPin;
+	MV_U8				ledsPolarity;	/* '0' or '1' to turn on led */
+	/* GPP values */
+	MV_U32				gppOutEnValLow;
+	MV_U32				gppOutEnValHigh;
+	MV_U32				gppOutValLow;
+	MV_U32				gppOutValHigh;
+	MV_U32				gppPolarityValLow;
+	MV_U32				gppPolarityValHigh;
+
+	/* Switch Configuration */
+	MV_BOARD_SWITCH_INFO*		pSwitchInfo;
+}MV_BOARD_INFO;
+
+
+
+MV_VOID 	mvBoardEnvInit(MV_VOID);
+MV_U32      	mvBoardIdGet(MV_VOID);
+MV_U16      	mvBoardModelGet(MV_VOID);
+MV_U16      	mvBoardRevGet(MV_VOID);
+MV_STATUS	mvBoardNameGet(char *pNameBuff);
+MV_32      	mvBoardPhyAddrGet(MV_U32 ethPortNum);
+MV_BOARD_MAC_SPEED      mvBoardMacSpeedGet(MV_U32 ethPortNum);
+MV_32		mvBoardLinkStatusIrqGet(MV_U32 ethPortNum);
+MV_32		mvBoardSwitchPortGet(MV_U32 ethPortNum, MV_U8 boardPortNum);
+MV_32		mvBoardSwitchCpuPortGet(MV_U32 ethPortNum);
+MV_32		mvBoardIsSwitchConnected(MV_U32 ethPortNum);
+MV_32		mvBoardSmiScanModeGet(MV_U32 ethPortNum);
+MV_BOOL     	mvBoardIsPortInSgmii(MV_U32 ethPortNum);
+MV_BOOL 	mvBoardIsPortInGmii(MV_VOID);
+MV_U32 		mvBoardTclkGet(MV_VOID);
+MV_U32      	mvBoardSysClkGet(MV_VOID);
+MV_U32 		mvBoardDebugLedNumGet(MV_U32 boardId);
+MV_VOID     	mvBoardDebugLed(MV_U32 hexNum);
+MV_32      	mvBoardMppGet(MV_U32 mppGroupNum);
+
+MV_U8		mvBoardRtcTwsiAddrTypeGet(MV_VOID);
+MV_U8		mvBoardRtcTwsiAddrGet(MV_VOID);
+
+MV_U8		mvBoardA2DTwsiAddrTypeGet(MV_VOID);
+MV_U8		mvBoardA2DTwsiAddrGet(MV_VOID);
+
+MV_U8 		mvBoardTwsiExpAddrGet(MV_U32 index);
+MV_U8 		mvBoardTwsiSatRAddrTypeGet(MV_U32 index);
+MV_U8 		mvBoardTwsiSatRAddrGet(MV_U32 index);
+MV_U8 		mvBoardTwsiExpAddrTypeGet(MV_U32 index);
+MV_BOARD_MODULE_ID_CLASS 	mvBoarModuleTypeGet(MV_BOARD_MPP_GROUP_CLASS devClass);
+MV_BOARD_MPP_TYPE_CLASS 	mvBoardMppGroupTypeGet(MV_BOARD_MPP_GROUP_CLASS mppGroupClass);
+MV_VOID 	mvBoardMppGroupTypeSet(MV_BOARD_MPP_GROUP_CLASS mppGroupClass,
+						MV_BOARD_MPP_TYPE_CLASS mppGroupType);
+MV_VOID 	mvBoardMppGroupIdUpdate(MV_VOID);
+MV_VOID 	mvBoardMppMuxSet(MV_VOID);
+MV_VOID 	mvBoardTdmMppSet(MV_32 chType);
+MV_VOID 	mvBoardVoiceConnModeGet(MV_32* connMode, MV_32* irqMode);
+
+MV_VOID 	mvBoardMppModuleTypePrint(MV_VOID);
+MV_VOID	    	mvBoardReset(MV_VOID);
+MV_U8 		mvBoarTwsiSatRGet(MV_U8 devNum, MV_U8 regNum);
+MV_STATUS 		mvBoarTwsiSatRSet(MV_U8 devNum, MV_U8 regNum, MV_U8 regVal);
+MV_BOOL 	mvBoardSpecInitGet(MV_U32* regOff, MV_U32* data);
+/* Board devices API managments */
+MV_32  	    mvBoardGetDevicesNumber(MV_BOARD_DEV_CLASS devClass);
+MV_32  	    mvBoardGetDeviceBaseAddr(MV_32 devNum, MV_BOARD_DEV_CLASS devClass);
+MV_32	    mvBoardGetDeviceBusWidth(MV_32 devNum, MV_BOARD_DEV_CLASS devClass);
+MV_32  	    mvBoardGetDeviceWidth(MV_32 devNum, MV_BOARD_DEV_CLASS devClass);
+MV_32  	    mvBoardGetDeviceWinSize(MV_32 devNum, MV_BOARD_DEV_CLASS devClass);
+MV_U32 	    boardGetDevCSNum(MV_32 devNum, MV_BOARD_DEV_CLASS devClass);
+
+/* Gpio Pin Connections API */
+MV_32 	    mvBoardUSBVbusGpioPinGet(int devId);
+MV_32 	    mvBoardUSBVbusEnGpioPinGet(int devId);
+MV_U32      mvBoardPexBridgeIntPinGet(MV_U32 devNum, MV_U32 intPin);
+
+MV_32	    mvBoardResetGpioPinGet(MV_VOID);
+MV_32 	    mvBoardRTCGpioPinGet(MV_VOID);
+MV_32 	    mvBoardGpioIntMaskLowGet(MV_VOID);
+MV_32 	    mvBoardGpioIntMaskHighGet(MV_VOID);
+MV_32 	    mvBoardSlicGpioPinGet(MV_U32 slicNum);
+
+MV_32	    mvBoardSDIOGpioPinGet(MV_VOID);
+MV_STATUS   mvBoardSDioWPControl(MV_BOOL mode);
+MV_32	    mvBoarGpioPinNumGet(MV_BOARD_GPP_CLASS class, MV_U32 index);
+
+MV_32 	    mvBoardNandWidthGet(void);
+MV_STATUS   mvBoardFanPowerControl(MV_BOOL mode);
+MV_STATUS   mvBoardHDDPowerControl(MV_BOOL mode);
+#endif /* __INCmvBoardEnvLibh */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvSpec.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvSpec.c
new file mode 100644
index 0000000000..e256c4f709
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvSpec.c
@@ -0,0 +1,848 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+#include "mvCommon.h"
+#include "mvBoardEnvLib.h"
+#include "mvBoardEnvSpec.h"
+#include "twsi/mvTwsi.h"
+
+#define DB_88F6281A_BOARD_PCI_IF_NUM            0x0
+#define DB_88F6281A_BOARD_TWSI_DEF_NUM		    0x7
+#define DB_88F6281A_BOARD_MAC_INFO_NUM		    0x2
+#define DB_88F6281A_BOARD_GPP_INFO_NUM		    0x3
+#define DB_88F6281A_BOARD_MPP_CONFIG_NUM		0x1
+#define DB_88F6281A_BOARD_MPP_GROUP_TYPE_NUM	0x1
+#if defined(MV_NAND) && defined(MV_NAND_BOOT)
+    #define DB_88F6281A_BOARD_DEVICE_CONFIG_NUM	    0x1
+#elif defined(MV_NAND) && defined(MV_SPI_BOOT)
+    #define DB_88F6281A_BOARD_DEVICE_CONFIG_NUM	    0x2
+#else
+    #define DB_88F6281A_BOARD_DEVICE_CONFIG_NUM	    0x1
+#endif
+#define DB_88F6281A_BOARD_DEBUG_LED_NUM		    0x0
+
+
+MV_BOARD_TWSI_INFO	db88f6281AInfoBoardTwsiDev[] =
+	/* {{MV_BOARD_DEV_CLASS	devClass, MV_U8	twsiDevAddr, MV_U8 twsiDevAddrType}} */
+	{
+	{BOARD_DEV_TWSI_EXP, 0x20, ADDR7_BIT},
+	{BOARD_DEV_TWSI_EXP, 0x21, ADDR7_BIT},
+	{BOARD_DEV_TWSI_EXP, 0x27, ADDR7_BIT},
+	{BOARD_DEV_TWSI_SATR, 0x4C, ADDR7_BIT},
+	{BOARD_DEV_TWSI_SATR, 0x4D, ADDR7_BIT},
+	{BOARD_DEV_TWSI_SATR, 0x4E, ADDR7_BIT},
+	{BOARD_TWSI_AUDIO_DEC, 0x4A, ADDR7_BIT}
+	};
+
+MV_BOARD_MAC_INFO db88f6281AInfoBoardMacInfo[] = 
+	/* {{MV_BOARD_MAC_SPEED	boardMacSpeed, MV_U8 boardEthSmiAddr}} */
+	{
+	{BOARD_MAC_SPEED_AUTO, 0x8},
+	{BOARD_MAC_SPEED_AUTO, 0x9}
+	}; 
+
+MV_BOARD_MPP_TYPE_INFO db88f6281AInfoBoardMppTypeInfo[] = 
+	/* {{MV_BOARD_MPP_TYPE_CLASS	boardMppGroup1,
+ 		MV_BOARD_MPP_TYPE_CLASS	boardMppGroup2}} */
+	{{MV_BOARD_AUTO, MV_BOARD_AUTO}
+	}; 
+
+MV_BOARD_GPP_INFO db88f6281AInfoBoardGppInfo[] = 
+	/* {{MV_BOARD_GPP_CLASS	devClass, MV_U8	gppPinNum}} */
+	{
+	{BOARD_GPP_TSU_DIRCTION, 33}
+	/*muxed with TDM/Audio module via IOexpender
+	{BOARD_GPP_SDIO_DETECT, 38},
+	{BOARD_GPP_USB_VBUS, 49}*/
+	};
+
+MV_DEV_CS_INFO db88f6281AInfoBoardDeCsInfo[] = 
+		/*{deviceCS, params, devType, devWidth}*/			   
+#if defined(MV_NAND) && defined(MV_NAND_BOOT)
+		 {{0, N_A, BOARD_DEV_NAND_FLASH, 8}};	   /* NAND DEV */         
+#elif defined(MV_NAND) && defined(MV_SPI_BOOT)
+		 {
+         {0, N_A, BOARD_DEV_NAND_FLASH, 8},	   /* NAND DEV */
+         {1, N_A, BOARD_DEV_SPI_FLASH, 8},	   /* SPI DEV */
+         };
+#else
+	 {{1, N_A, BOARD_DEV_SPI_FLASH, 8}};	   /* SPI DEV */         
+#endif
+
+MV_BOARD_MPP_INFO	db88f6281AInfoBoardMppConfigValue[] = 
+	{{{
+	DB_88F6281A_MPP0_7,		
+	DB_88F6281A_MPP8_15,		
+	DB_88F6281A_MPP16_23,		
+	DB_88F6281A_MPP24_31,		
+	DB_88F6281A_MPP32_39,		
+	DB_88F6281A_MPP40_47,		
+	DB_88F6281A_MPP48_55		
+	}}};
+
+
+MV_BOARD_INFO db88f6281AInfo = {
+	"DB-88F6281A-BP",				/* boardName[MAX_BOARD_NAME_LEN] */
+	DB_88F6281A_BOARD_MPP_GROUP_TYPE_NUM,		/* numBoardMppGroupType */
+	db88f6281AInfoBoardMppTypeInfo,
+	DB_88F6281A_BOARD_MPP_CONFIG_NUM,		/* numBoardMppConfig */
+	db88f6281AInfoBoardMppConfigValue,
+	0,						/* intsGppMaskLow */
+	0,						/* intsGppMaskHigh */
+	DB_88F6281A_BOARD_DEVICE_CONFIG_NUM,		/* numBoardDevIf */
+	db88f6281AInfoBoardDeCsInfo,
+	DB_88F6281A_BOARD_TWSI_DEF_NUM,			/* numBoardTwsiDev */
+	db88f6281AInfoBoardTwsiDev,					
+	DB_88F6281A_BOARD_MAC_INFO_NUM,			/* numBoardMacInfo */
+	db88f6281AInfoBoardMacInfo,
+	DB_88F6281A_BOARD_GPP_INFO_NUM,			/* numBoardGppInfo */
+	db88f6281AInfoBoardGppInfo,
+	DB_88F6281A_BOARD_DEBUG_LED_NUM,			/* activeLedsNumber */              
+	NULL,
+	0,						/* ledsPolarity */		
+	DB_88F6281A_OE_LOW,				/* gppOutEnLow */
+	DB_88F6281A_OE_HIGH,				/* gppOutEnHigh */
+	DB_88F6281A_OE_VAL_LOW,				/* gppOutValLow */
+	DB_88F6281A_OE_VAL_HIGH,				/* gppOutValHigh */
+	0,						/* gppPolarityValLow */
+	BIT6, 						/* gppPolarityValHigh */
+	NULL						/* pSwitchInfo */
+};
+
+
+#define RD_88F6281A_BOARD_PCI_IF_NUM		0x0
+#define RD_88F6281A_BOARD_TWSI_DEF_NUM		0x2
+#define RD_88F6281A_BOARD_MAC_INFO_NUM		0x2
+#define RD_88F6281A_BOARD_GPP_INFO_NUM		0x5
+#define RD_88F6281A_BOARD_MPP_GROUP_TYPE_NUM	0x1
+#define RD_88F6281A_BOARD_MPP_CONFIG_NUM		0x1
+#if defined(MV_NAND) && defined(MV_NAND_BOOT)
+    #define RD_88F6281A_BOARD_DEVICE_CONFIG_NUM	    0x1
+#elif defined(MV_NAND) && defined(MV_SPI_BOOT)
+    #define RD_88F6281A_BOARD_DEVICE_CONFIG_NUM	    0x2
+#else
+    #define RD_88F6281A_BOARD_DEVICE_CONFIG_NUM	    0x1
+#endif
+#define RD_88F6281A_BOARD_DEBUG_LED_NUM		0x0
+
+MV_BOARD_MAC_INFO rd88f6281AInfoBoardMacInfo[] = 
+	/* {{MV_BOARD_MAC_SPEED	boardMacSpeed, MV_U8 boardEthSmiAddr}} */
+	{{BOARD_MAC_SPEED_1000M, 0xa},
+    {BOARD_MAC_SPEED_AUTO, 0xb}
+	}; 
+
+MV_BOARD_SWITCH_INFO rd88f6281AInfoBoardSwitchInfo[] = 
+	/* MV_32 linkStatusIrq, {MV_32 qdPort0, MV_32 qdPort1, MV_32 qdPort2, MV_32 qdPort3, MV_32 qdPort4}, 
+		MV_32 qdCpuPort, MV_32 smiScanMode, MV_32 switchOnPort} */
+	{{38, {0, 1, 2, 3, -1}, 5, 2, 0},
+	 {-1, {-1}, -1, -1, -1}};
+
+MV_BOARD_TWSI_INFO	rd88f6281AInfoBoardTwsiDev[] =
+	/* {{MV_BOARD_DEV_CLASS	devClass, MV_U8	twsiDevAddr, MV_U8 twsiDevAddrType}} */
+	{
+	{BOARD_DEV_TWSI_EXP, 0xFF, ADDR7_BIT}, /* dummy entry to align with modules indexes */
+	{BOARD_DEV_TWSI_EXP, 0x27, ADDR7_BIT}
+	};
+
+MV_BOARD_MPP_TYPE_INFO rd88f6281AInfoBoardMppTypeInfo[] = 
+	{{MV_BOARD_RGMII, MV_BOARD_TDM}
+	}; 
+
+MV_DEV_CS_INFO rd88f6281AInfoBoardDeCsInfo[] = 
+		/*{deviceCS, params, devType, devWidth}*/			   
+#if defined(MV_NAND) && defined(MV_NAND_BOOT)
+		 {{0, N_A, BOARD_DEV_NAND_FLASH, 8}};	   /* NAND DEV */
+#elif defined(MV_NAND) && defined(MV_SPI_BOOT)
+		 {
+         {0, N_A, BOARD_DEV_NAND_FLASH, 8},	   /* NAND DEV */
+         {1, N_A, BOARD_DEV_SPI_FLASH, 8},	   /* SPI DEV */
+         };
+#else
+		 {{1, N_A, BOARD_DEV_SPI_FLASH, 8}};	   /* SPI DEV */         
+#endif
+
+MV_BOARD_GPP_INFO rd88f6281AInfoBoardGppInfo[] = 
+	/* {{MV_BOARD_GPP_CLASS	devClass, MV_U8	gppPinNum}} */
+	{{BOARD_GPP_SDIO_DETECT, 28},
+    {BOARD_GPP_USB_OC, 29},
+    {BOARD_GPP_WPS_BUTTON, 35},
+    {BOARD_GPP_MV_SWITCH, 38},
+    {BOARD_GPP_USB_VBUS, 49}
+	};
+
+MV_BOARD_MPP_INFO	rd88f6281AInfoBoardMppConfigValue[] = 
+	{{{
+	RD_88F6281A_MPP0_7,		
+	RD_88F6281A_MPP8_15,		
+	RD_88F6281A_MPP16_23,		
+	RD_88F6281A_MPP24_31,		
+	RD_88F6281A_MPP32_39,		
+	RD_88F6281A_MPP40_47,		
+	RD_88F6281A_MPP48_55		
+	}}};
+
+MV_BOARD_INFO rd88f6281AInfo = {
+	"RD-88F6281A",				/* boardName[MAX_BOARD_NAME_LEN] */
+	RD_88F6281A_BOARD_MPP_GROUP_TYPE_NUM,		/* numBoardMppGroupType */
+	rd88f6281AInfoBoardMppTypeInfo,
+	RD_88F6281A_BOARD_MPP_CONFIG_NUM,		/* numBoardMppConfig */
+	rd88f6281AInfoBoardMppConfigValue,
+	0,						/* intsGppMaskLow */
+	(1 << 3),					/* intsGppMaskHigh */
+	RD_88F6281A_BOARD_DEVICE_CONFIG_NUM,		/* numBoardDevIf */
+	rd88f6281AInfoBoardDeCsInfo,
+	RD_88F6281A_BOARD_TWSI_DEF_NUM,			/* numBoardTwsiDev */
+	rd88f6281AInfoBoardTwsiDev,					
+	RD_88F6281A_BOARD_MAC_INFO_NUM,			/* numBoardMacInfo */
+	rd88f6281AInfoBoardMacInfo,
+	RD_88F6281A_BOARD_GPP_INFO_NUM,			/* numBoardGppInfo */
+	rd88f6281AInfoBoardGppInfo,
+	RD_88F6281A_BOARD_DEBUG_LED_NUM,			/* activeLedsNumber */              
+	NULL,
+	0,										/* ledsPolarity */		
+	RD_88F6281A_OE_LOW,				/* gppOutEnLow */
+	RD_88F6281A_OE_HIGH,				/* gppOutEnHigh */
+	RD_88F6281A_OE_VAL_LOW,				/* gppOutValLow */
+	RD_88F6281A_OE_VAL_HIGH,				/* gppOutValHigh */
+	0,						/* gppPolarityValLow */
+	BIT6, 						/* gppPolarityValHigh */
+	rd88f6281AInfoBoardSwitchInfo			/* pSwitchInfo */
+};
+
+
+#define DB_88F6192A_BOARD_PCI_IF_NUM            0x0
+#define DB_88F6192A_BOARD_TWSI_DEF_NUM		    0x7
+#define DB_88F6192A_BOARD_MAC_INFO_NUM		    0x2
+#define DB_88F6192A_BOARD_GPP_INFO_NUM		    0x3
+#define DB_88F6192A_BOARD_MPP_GROUP_TYPE_NUM	0x1
+#define DB_88F6192A_BOARD_MPP_CONFIG_NUM		0x1
+#if defined(MV_NAND) && defined(MV_NAND_BOOT)
+    #define DB_88F6192A_BOARD_DEVICE_CONFIG_NUM	    0x1
+#elif defined(MV_NAND) && defined(MV_SPI_BOOT)
+    #define DB_88F6192A_BOARD_DEVICE_CONFIG_NUM	    0x2
+#else
+    #define DB_88F6192A_BOARD_DEVICE_CONFIG_NUM	    0x1
+#endif
+#define DB_88F6192A_BOARD_DEBUG_LED_NUM		    0x0
+
+MV_BOARD_TWSI_INFO	db88f6192AInfoBoardTwsiDev[] =
+	/* {{MV_BOARD_DEV_CLASS	devClass, MV_U8	twsiDevAddr, MV_U8 twsiDevAddrType}} */
+	{
+	{BOARD_DEV_TWSI_EXP, 0x20, ADDR7_BIT},
+	{BOARD_DEV_TWSI_EXP, 0x21, ADDR7_BIT},
+	{BOARD_DEV_TWSI_EXP, 0x27, ADDR7_BIT},
+	{BOARD_DEV_TWSI_SATR, 0x4C, ADDR7_BIT},
+	{BOARD_DEV_TWSI_SATR, 0x4D, ADDR7_BIT},
+	{BOARD_DEV_TWSI_SATR, 0x4E, ADDR7_BIT},
+	{BOARD_TWSI_AUDIO_DEC, 0x4A, ADDR7_BIT}
+	};
+
+MV_BOARD_MAC_INFO db88f6192AInfoBoardMacInfo[] = 
+	/* {{MV_BOARD_MAC_SPEED	boardMacSpeed, MV_U8 boardEthSmiAddr}} */
+	{
+	{BOARD_MAC_SPEED_AUTO, 0x8},
+	{BOARD_MAC_SPEED_AUTO, 0x9}
+	}; 
+
+MV_BOARD_MPP_TYPE_INFO db88f6192AInfoBoardMppTypeInfo[] = 
+	/* {{MV_BOARD_MPP_TYPE_CLASS	boardMppGroup1,
+ 		MV_BOARD_MPP_TYPE_CLASS	boardMppGroup2}} */
+	{{MV_BOARD_AUTO, MV_BOARD_OTHER}
+	}; 
+
+MV_DEV_CS_INFO db88f6192AInfoBoardDeCsInfo[] = 
+		/*{deviceCS, params, devType, devWidth}*/			   
+#if defined(MV_NAND) && defined(MV_NAND_BOOT)
+		 {{0, N_A, BOARD_DEV_NAND_FLASH, 8}};	   /* NAND DEV */
+#elif defined(MV_NAND) && defined(MV_SPI_BOOT)
+		 {
+         {0, N_A, BOARD_DEV_NAND_FLASH, 8},	   /* NAND DEV */
+         {1, N_A, BOARD_DEV_SPI_FLASH, 8},	   /* SPI DEV */
+         };
+#else
+		 {{1, N_A, BOARD_DEV_SPI_FLASH, 8}};	   /* SPI DEV */         
+#endif
+
+MV_BOARD_GPP_INFO db88f6192AInfoBoardGppInfo[] = 
+	/* {{MV_BOARD_GPP_CLASS	devClass, MV_U8	gppPinNum}} */
+	{
+    {BOARD_GPP_SDIO_WP, 20},
+	{BOARD_GPP_USB_VBUS, 22},
+	{BOARD_GPP_SDIO_DETECT, 23},
+	};
+
+MV_BOARD_MPP_INFO	db88f6192AInfoBoardMppConfigValue[] = 
+	{{{
+	DB_88F6192A_MPP0_7,		
+	DB_88F6192A_MPP8_15,		
+	DB_88F6192A_MPP16_23,		
+	DB_88F6192A_MPP24_31,		
+	DB_88F6192A_MPP32_35
+	}}};
+
+MV_BOARD_INFO db88f6192AInfo = {
+	"DB-88F6192A-BP",				/* boardName[MAX_BOARD_NAME_LEN] */
+	DB_88F6192A_BOARD_MPP_GROUP_TYPE_NUM,		/* numBoardMppGroupType */
+	db88f6192AInfoBoardMppTypeInfo,
+	DB_88F6192A_BOARD_MPP_CONFIG_NUM,		/* numBoardMppConfig */
+	db88f6192AInfoBoardMppConfigValue,
+	0,						/* intsGppMaskLow */
+	(1 << 3),					/* intsGppMaskHigh */
+	DB_88F6192A_BOARD_DEVICE_CONFIG_NUM,		/* numBoardDevIf */
+	db88f6192AInfoBoardDeCsInfo,
+	DB_88F6192A_BOARD_TWSI_DEF_NUM,			/* numBoardTwsiDev */
+	db88f6192AInfoBoardTwsiDev,					
+	DB_88F6192A_BOARD_MAC_INFO_NUM,			/* numBoardMacInfo */
+	db88f6192AInfoBoardMacInfo,
+	DB_88F6192A_BOARD_GPP_INFO_NUM,			/* numBoardGppInfo */
+	db88f6192AInfoBoardGppInfo,
+	DB_88F6192A_BOARD_DEBUG_LED_NUM,			/* activeLedsNumber */              
+	NULL,
+	0,										/* ledsPolarity */		
+	DB_88F6192A_OE_LOW,				/* gppOutEnLow */
+	DB_88F6192A_OE_HIGH,				/* gppOutEnHigh */
+	DB_88F6192A_OE_VAL_LOW,				/* gppOutValLow */
+	DB_88F6192A_OE_VAL_HIGH,				/* gppOutValHigh */
+	0,						/* gppPolarityValLow */
+	0, 						/* gppPolarityValHigh */
+	NULL						/* pSwitchInfo */
+};
+
+#define DB_88F6190A_BOARD_MAC_INFO_NUM		0x1
+
+MV_BOARD_INFO db88f6190AInfo = {
+	"DB-88F6190A-BP",				/* boardName[MAX_BOARD_NAME_LEN] */
+	DB_88F6192A_BOARD_MPP_GROUP_TYPE_NUM,		/* numBoardMppGroupType */
+	db88f6192AInfoBoardMppTypeInfo,
+	DB_88F6192A_BOARD_MPP_CONFIG_NUM,		/* numBoardMppConfig */
+	db88f6192AInfoBoardMppConfigValue,
+	0,						/* intsGppMaskLow */
+	(1 << 3),					/* intsGppMaskHigh */
+	DB_88F6192A_BOARD_DEVICE_CONFIG_NUM,		/* numBoardDevIf */
+	db88f6192AInfoBoardDeCsInfo,
+	DB_88F6192A_BOARD_TWSI_DEF_NUM,			/* numBoardTwsiDev */
+	db88f6192AInfoBoardTwsiDev,					
+	DB_88F6190A_BOARD_MAC_INFO_NUM,			/* numBoardMacInfo */
+	db88f6192AInfoBoardMacInfo,
+	DB_88F6192A_BOARD_GPP_INFO_NUM,			/* numBoardGppInfo */
+	db88f6192AInfoBoardGppInfo,
+	DB_88F6192A_BOARD_DEBUG_LED_NUM,			/* activeLedsNumber */              
+	NULL,
+	0,										/* ledsPolarity */		
+	DB_88F6192A_OE_LOW,				/* gppOutEnLow */
+	DB_88F6192A_OE_HIGH,				/* gppOutEnHigh */
+	DB_88F6192A_OE_VAL_LOW,				/* gppOutValLow */
+	DB_88F6192A_OE_VAL_HIGH,				/* gppOutValHigh */
+	0,						/* gppPolarityValLow */
+	0, 						/* gppPolarityValHigh */
+	NULL						/* pSwitchInfo */
+};
+
+#define RD_88F6192A_BOARD_PCI_IF_NUM		0x0
+#define RD_88F6192A_BOARD_TWSI_DEF_NUM		0x0
+#define RD_88F6192A_BOARD_MAC_INFO_NUM		0x1
+#define RD_88F6192A_BOARD_GPP_INFO_NUM		0xE
+#define RD_88F6192A_BOARD_MPP_GROUP_TYPE_NUM	0x1
+#define RD_88F6192A_BOARD_MPP_CONFIG_NUM		0x1
+#define RD_88F6192A_BOARD_DEVICE_CONFIG_NUM	0x1
+#define RD_88F6192A_BOARD_DEBUG_LED_NUM		0x3
+
+MV_U8	rd88f6192AInfoBoardDebugLedIf[] =
+	{17, 28, 29};
+
+MV_BOARD_MAC_INFO rd88f6192AInfoBoardMacInfo[] = 
+	/* {{MV_BOARD_MAC_SPEED	boardMacSpeed, MV_U8 boardEthSmiAddr}} */
+	{{BOARD_MAC_SPEED_AUTO, 0x8}
+	}; 
+
+MV_BOARD_MPP_TYPE_INFO rd88f6192AInfoBoardMppTypeInfo[] = 
+	/* {{MV_BOARD_MPP_TYPE_CLASS	boardMppGroup1,
+ 		MV_BOARD_MPP_TYPE_CLASS	boardMppGroup2}} */
+	{{MV_BOARD_OTHER, MV_BOARD_OTHER}
+	}; 
+
+MV_DEV_CS_INFO rd88f6192AInfoBoardDeCsInfo[] = 
+		/*{deviceCS, params, devType, devWidth}*/			   
+		 {{1, N_A, BOARD_DEV_SPI_FLASH, 8}};	   /* SPI DEV */
+
+MV_BOARD_GPP_INFO rd88f6192AInfoBoardGppInfo[] = 
+	/* {{MV_BOARD_GPP_CLASS	devClass, MV_U8	gppPinNum}} */
+	{
+	{BOARD_GPP_USB_VBUS_EN, 10},
+	{BOARD_GPP_USB_HOST_DEVICE, 11},
+	{BOARD_GPP_RESET, 14},
+	{BOARD_GPP_POWER_ON_LED, 15},
+	{BOARD_GPP_HDD_POWER, 16},
+	{BOARD_GPP_WPS_BUTTON, 24},
+	{BOARD_GPP_TS_BUTTON_C, 25},
+	{BOARD_GPP_USB_VBUS, 26},
+	{BOARD_GPP_USB_OC, 27},
+	{BOARD_GPP_TS_BUTTON_U, 30},
+	{BOARD_GPP_TS_BUTTON_R, 31},
+	{BOARD_GPP_TS_BUTTON_L, 32},
+	{BOARD_GPP_TS_BUTTON_D, 34},
+	{BOARD_GPP_FAN_POWER, 35}
+	};
+
+MV_BOARD_MPP_INFO	rd88f6192AInfoBoardMppConfigValue[] = 
+	{{{
+	RD_88F6192A_MPP0_7,		
+	RD_88F6192A_MPP8_15,		
+	RD_88F6192A_MPP16_23,		
+	RD_88F6192A_MPP24_31,		
+	RD_88F6192A_MPP32_35
+	}}};
+
+MV_BOARD_INFO rd88f6192AInfo = {
+	"RD-88F6192A-NAS",				/* boardName[MAX_BOARD_NAME_LEN] */
+	RD_88F6192A_BOARD_MPP_GROUP_TYPE_NUM,		/* numBoardMppGroupType */
+	rd88f6192AInfoBoardMppTypeInfo,
+	RD_88F6192A_BOARD_MPP_CONFIG_NUM,		/* numBoardMppConfig */
+	rd88f6192AInfoBoardMppConfigValue,
+	0,						/* intsGppMaskLow */
+	(1 << 3),					/* intsGppMaskHigh */
+	RD_88F6192A_BOARD_DEVICE_CONFIG_NUM,		/* numBoardDevIf */
+	rd88f6192AInfoBoardDeCsInfo,
+	RD_88F6192A_BOARD_TWSI_DEF_NUM,			/* numBoardTwsiDev */
+	NULL,					
+	RD_88F6192A_BOARD_MAC_INFO_NUM,			/* numBoardMacInfo */
+	rd88f6192AInfoBoardMacInfo,
+	RD_88F6192A_BOARD_GPP_INFO_NUM,			/* numBoardGppInfo */
+	rd88f6192AInfoBoardGppInfo,
+	RD_88F6192A_BOARD_DEBUG_LED_NUM,			/* activeLedsNumber */              
+	rd88f6192AInfoBoardDebugLedIf,
+	0,										/* ledsPolarity */		
+	RD_88F6192A_OE_LOW,				/* gppOutEnLow */
+	RD_88F6192A_OE_HIGH,				/* gppOutEnHigh */
+	RD_88F6192A_OE_VAL_LOW,				/* gppOutValLow */
+	RD_88F6192A_OE_VAL_HIGH,				/* gppOutValHigh */
+	0,						/* gppPolarityValLow */
+	0, 						/* gppPolarityValHigh */
+	NULL						/* pSwitchInfo */
+};
+
+MV_BOARD_INFO rd88f6190AInfo = {
+	"RD-88F6190A-NAS",				/* boardName[MAX_BOARD_NAME_LEN] */
+	RD_88F6192A_BOARD_MPP_GROUP_TYPE_NUM,		/* numBoardMppGroupType */
+	rd88f6192AInfoBoardMppTypeInfo,
+	RD_88F6192A_BOARD_MPP_CONFIG_NUM,		/* numBoardMppConfig */
+	rd88f6192AInfoBoardMppConfigValue,
+	0,						/* intsGppMaskLow */
+	(1 << 3),					/* intsGppMaskHigh */
+	RD_88F6192A_BOARD_DEVICE_CONFIG_NUM,		/* numBoardDevIf */
+	rd88f6192AInfoBoardDeCsInfo,
+	RD_88F6192A_BOARD_TWSI_DEF_NUM,			/* numBoardTwsiDev */
+	NULL,					
+	RD_88F6192A_BOARD_MAC_INFO_NUM,			/* numBoardMacInfo */
+	rd88f6192AInfoBoardMacInfo,
+	RD_88F6192A_BOARD_GPP_INFO_NUM,			/* numBoardGppInfo */
+	rd88f6192AInfoBoardGppInfo,
+	RD_88F6192A_BOARD_DEBUG_LED_NUM,			/* activeLedsNumber */              
+	rd88f6192AInfoBoardDebugLedIf,
+	0,										/* ledsPolarity */		
+	RD_88F6192A_OE_LOW,				/* gppOutEnLow */
+	RD_88F6192A_OE_HIGH,				/* gppOutEnHigh */
+	RD_88F6192A_OE_VAL_LOW,				/* gppOutValLow */
+	RD_88F6192A_OE_VAL_HIGH,				/* gppOutValHigh */
+	0,						/* gppPolarityValLow */
+	0, 						/* gppPolarityValHigh */
+	NULL						/* pSwitchInfo */
+};
+
+#define DB_88F6180A_BOARD_PCI_IF_NUM		0x0
+#define DB_88F6180A_BOARD_TWSI_DEF_NUM		0x5
+#define DB_88F6180A_BOARD_MAC_INFO_NUM		0x1
+#define DB_88F6180A_BOARD_GPP_INFO_NUM		0x0
+#define DB_88F6180A_BOARD_MPP_GROUP_TYPE_NUM	0x2
+#define DB_88F6180A_BOARD_MPP_CONFIG_NUM		0x1
+#define DB_88F6180A_BOARD_DEVICE_CONFIG_NUM	    0x1
+#define DB_88F6180A_BOARD_DEBUG_LED_NUM		0x0
+
+MV_BOARD_TWSI_INFO	db88f6180AInfoBoardTwsiDev[] =
+	/* {{MV_BOARD_DEV_CLASS	devClass, MV_U8	twsiDevAddr, MV_U8 twsiDevAddrType}} */
+	{
+    {BOARD_DEV_TWSI_EXP, 0x20, ADDR7_BIT},
+    {BOARD_DEV_TWSI_EXP, 0x21, ADDR7_BIT},
+    {BOARD_DEV_TWSI_EXP, 0x27, ADDR7_BIT},
+	{BOARD_DEV_TWSI_SATR, 0x4C, ADDR7_BIT},
+	{BOARD_TWSI_AUDIO_DEC, 0x4A, ADDR7_BIT}
+	};
+
+MV_BOARD_MAC_INFO db88f6180AInfoBoardMacInfo[] = 
+	/* {{MV_BOARD_MAC_SPEED	boardMacSpeed, MV_U8 boardEthSmiAddr}} */
+	{{BOARD_MAC_SPEED_AUTO, 0x8}
+	}; 
+
+MV_BOARD_GPP_INFO db88f6180AInfoBoardGppInfo[] = 
+	/* {{MV_BOARD_GPP_CLASS	devClass, MV_U8	gppPinNum}} */
+	{
+	/* Muxed with TDM/Audio module via IOexpender
+	{BOARD_GPP_USB_VBUS, 6} */
+	};
+
+MV_BOARD_MPP_TYPE_INFO db88f6180AInfoBoardMppTypeInfo[] = 
+	/* {{MV_BOARD_MPP_TYPE_CLASS	boardMppGroup1,
+ 		MV_BOARD_MPP_TYPE_CLASS	boardMppGroup2}} */
+	{{MV_BOARD_OTHER, MV_BOARD_AUTO}
+	}; 
+
+MV_DEV_CS_INFO db88f6180AInfoBoardDeCsInfo[] = 
+		/*{deviceCS, params, devType, devWidth}*/			   
+#if defined(MV_NAND_BOOT)
+		 {{0, N_A, BOARD_DEV_NAND_FLASH, 8}};	   /* NAND DEV */         
+#else
+		 {{1, N_A, BOARD_DEV_SPI_FLASH, 8}};	   /* SPI DEV */         
+#endif
+
+MV_BOARD_MPP_INFO	db88f6180AInfoBoardMppConfigValue[] = 
+	{{{
+	DB_88F6180A_MPP0_7,		
+	DB_88F6180A_MPP8_15,
+    DB_88F6180A_MPP16_23,
+    DB_88F6180A_MPP24_31,		
+    DB_88F6180A_MPP32_39,
+    DB_88F6180A_MPP40_44
+	}}};
+
+MV_BOARD_INFO db88f6180AInfo = {
+	"DB-88F6180A-BP",				/* boardName[MAX_BOARD_NAME_LEN] */
+	DB_88F6180A_BOARD_MPP_GROUP_TYPE_NUM,		/* numBoardMppGroupType */
+	db88f6180AInfoBoardMppTypeInfo,
+	DB_88F6180A_BOARD_MPP_CONFIG_NUM,		/* numBoardMppConfig */
+	db88f6180AInfoBoardMppConfigValue,
+	0,						/* intsGppMaskLow */
+	0,					/* intsGppMaskHigh */
+	DB_88F6180A_BOARD_DEVICE_CONFIG_NUM,		/* numBoardDevIf */
+	db88f6180AInfoBoardDeCsInfo,
+	DB_88F6180A_BOARD_TWSI_DEF_NUM,			/* numBoardTwsiDev */
+	db88f6180AInfoBoardTwsiDev,					
+	DB_88F6180A_BOARD_MAC_INFO_NUM,			/* numBoardMacInfo */
+	db88f6180AInfoBoardMacInfo,
+	DB_88F6180A_BOARD_GPP_INFO_NUM,			/* numBoardGppInfo */
+	NULL,
+	DB_88F6180A_BOARD_DEBUG_LED_NUM,			/* activeLedsNumber */              
+	NULL,
+	0,										/* ledsPolarity */		
+	DB_88F6180A_OE_LOW,				/* gppOutEnLow */
+	DB_88F6180A_OE_HIGH,				/* gppOutEnHigh */
+	DB_88F6180A_OE_VAL_LOW,				/* gppOutValLow */
+	DB_88F6180A_OE_VAL_HIGH,				/* gppOutValHigh */
+	0,						/* gppPolarityValLow */
+	0, 						/* gppPolarityValHigh */
+	NULL						/* pSwitchInfo */
+};
+
+
+#define RD_88F6281A_PCAC_BOARD_PCI_IF_NUM		0x0
+#define RD_88F6281A_PCAC_BOARD_TWSI_DEF_NUM		0x1
+#define RD_88F6281A_PCAC_BOARD_MAC_INFO_NUM		0x1
+#define RD_88F6281A_PCAC_BOARD_GPP_INFO_NUM		0x0
+#define RD_88F6281A_PCAC_BOARD_MPP_GROUP_TYPE_NUM	0x1
+#define RD_88F6281A_PCAC_BOARD_MPP_CONFIG_NUM		0x1
+#if defined(MV_NAND) && defined(MV_NAND_BOOT)
+    #define RD_88F6281A_PCAC_BOARD_DEVICE_CONFIG_NUM	    0x1
+#elif defined(MV_NAND) && defined(MV_SPI_BOOT)
+    #define RD_88F6281A_PCAC_BOARD_DEVICE_CONFIG_NUM	    0x2
+#else
+    #define RD_88F6281A_PCAC_BOARD_DEVICE_CONFIG_NUM	    0x1
+#endif
+#define RD_88F6281A_PCAC_BOARD_DEBUG_LED_NUM		0x4
+
+MV_U8	rd88f6281APcacInfoBoardDebugLedIf[] =
+	{38, 39, 40, 41};
+
+MV_BOARD_MAC_INFO rd88f6281APcacInfoBoardMacInfo[] = 
+	/* {{MV_BOARD_MAC_SPEED	boardMacSpeed, MV_U8 boardEthSmiAddr}} */
+	{{BOARD_MAC_SPEED_AUTO, 0x8}
+	}; 
+
+MV_BOARD_TWSI_INFO	rd88f6281APcacInfoBoardTwsiDev[] =
+	/* {{MV_BOARD_DEV_CLASS	devClass, MV_U8	twsiDevAddr, MV_U8 twsiDevAddrType}} */
+	{
+	{BOARD_TWSI_OTHER, 0xa7, ADDR7_BIT}
+	};
+
+MV_BOARD_MPP_TYPE_INFO rd88f6281APcacInfoBoardMppTypeInfo[] = 
+	{{MV_BOARD_OTHER, MV_BOARD_OTHER}
+	}; 
+
+MV_DEV_CS_INFO rd88f6281APcacInfoBoardDeCsInfo[] = 
+		/*{deviceCS, params, devType, devWidth}*/			   
+#if defined(MV_NAND) && defined(MV_NAND_BOOT)
+		 {{0, N_A, BOARD_DEV_NAND_FLASH, 8}};	   /* NAND DEV */
+#elif defined(MV_NAND) && defined(MV_SPI_BOOT)
+		 {
+         {0, N_A, BOARD_DEV_NAND_FLASH, 8},	   /* NAND DEV */
+         {1, N_A, BOARD_DEV_SPI_FLASH, 8},	   /* SPI DEV */
+         };
+#else
+	 {{1, N_A, BOARD_DEV_SPI_FLASH, 8}};	   /* SPI DEV */         
+#endif
+
+MV_BOARD_MPP_INFO	rd88f6281APcacInfoBoardMppConfigValue[] = 
+	{{{
+	RD_88F6281A_PCAC_MPP0_7,		
+	RD_88F6281A_PCAC_MPP8_15,		
+	RD_88F6281A_PCAC_MPP16_23,		
+	RD_88F6281A_PCAC_MPP24_31,		
+	RD_88F6281A_PCAC_MPP32_39,		
+	RD_88F6281A_PCAC_MPP40_47,		
+	RD_88F6281A_PCAC_MPP48_55		
+	}}};
+
+MV_BOARD_INFO rd88f6281APcacInfo = {
+	"RD-88F6281A-PCAC",				/* boardName[MAX_BOARD_NAME_LEN] */
+	RD_88F6281A_PCAC_BOARD_MPP_GROUP_TYPE_NUM,	/* numBoardMppGroupType */
+	rd88f6281APcacInfoBoardMppTypeInfo,
+	RD_88F6281A_PCAC_BOARD_MPP_CONFIG_NUM,		/* numBoardMppConfig */
+	rd88f6281APcacInfoBoardMppConfigValue,
+	0,						/* intsGppMaskLow */
+	(1 << 3),					/* intsGppMaskHigh */
+	RD_88F6281A_PCAC_BOARD_DEVICE_CONFIG_NUM,	/* numBoardDevIf */
+	rd88f6281APcacInfoBoardDeCsInfo,
+	RD_88F6281A_PCAC_BOARD_TWSI_DEF_NUM,		/* numBoardTwsiDev */
+	rd88f6281APcacInfoBoardTwsiDev,					
+	RD_88F6281A_PCAC_BOARD_MAC_INFO_NUM,		/* numBoardMacInfo */
+	rd88f6281APcacInfoBoardMacInfo,
+	RD_88F6281A_PCAC_BOARD_GPP_INFO_NUM,		/* numBoardGppInfo */
+	0,
+	RD_88F6281A_PCAC_BOARD_DEBUG_LED_NUM,		/* activeLedsNumber */              
+	NULL,
+	0,										/* ledsPolarity */		
+	RD_88F6281A_PCAC_OE_LOW,			/* gppOutEnLow */
+	RD_88F6281A_PCAC_OE_HIGH,			/* gppOutEnHigh */
+	RD_88F6281A_PCAC_OE_VAL_LOW,			/* gppOutValLow */
+	RD_88F6281A_PCAC_OE_VAL_HIGH,			/* gppOutValHigh */
+	0,						/* gppPolarityValLow */
+	0, 	 					/* gppPolarityValHigh */
+	NULL						/* pSwitchInfo */
+};
+
+
+/* 6281 Sheeva Plug*/
+
+#define SHEEVA_PLUG_BOARD_PCI_IF_NUM		        0x0
+#define SHEEVA_PLUG_BOARD_TWSI_DEF_NUM		        0x0
+#define SHEEVA_PLUG_BOARD_MAC_INFO_NUM		        0x1
+#define SHEEVA_PLUG_BOARD_GPP_INFO_NUM		        0x0
+#define SHEEVA_PLUG_BOARD_MPP_GROUP_TYPE_NUN        0x1
+#define SHEEVA_PLUG_BOARD_MPP_CONFIG_NUM		    0x1
+#define SHEEVA_PLUG_BOARD_DEVICE_CONFIG_NUM	        0x1
+#define SHEEVA_PLUG_BOARD_DEBUG_LED_NUM		        0x1
+
+MV_U8	sheevaPlugInfoBoardDebugLedIf[] =
+	{49};
+
+MV_BOARD_MAC_INFO sheevaPlugInfoBoardMacInfo[] = 
+    /* {{MV_BOARD_MAC_SPEED	boardMacSpeed,	MV_U8	boardEthSmiAddr}} */
+	{{BOARD_MAC_SPEED_AUTO, 0x0}}; 
+
+MV_BOARD_TWSI_INFO	sheevaPlugInfoBoardTwsiDev[] =
+	/* {{MV_BOARD_DEV_CLASS	devClass, MV_U8	twsiDevAddr, MV_U8 twsiDevAddrType}} */
+	{{BOARD_TWSI_OTHER, 0x0, ADDR7_BIT}};
+
+MV_BOARD_MPP_TYPE_INFO sheevaPlugInfoBoardMppTypeInfo[] = 
+	{{MV_BOARD_OTHER, MV_BOARD_OTHER}
+	}; 
+
+MV_DEV_CS_INFO sheevaPlugInfoBoardDeCsInfo[] = 
+		/*{deviceCS, params, devType, devWidth}*/			   
+		 {{0, N_A, BOARD_DEV_NAND_FLASH, 8}};	   /* NAND DEV */
+
+MV_BOARD_MPP_INFO	sheevaPlugInfoBoardMppConfigValue[] = 
+	{{{
+	RD_SHEEVA_PLUG_MPP0_7,		
+	RD_SHEEVA_PLUG_MPP8_15,		
+	RD_SHEEVA_PLUG_MPP16_23,		
+	RD_SHEEVA_PLUG_MPP24_31,		
+	RD_SHEEVA_PLUG_MPP32_39,		
+	RD_SHEEVA_PLUG_MPP40_47,		
+	RD_SHEEVA_PLUG_MPP48_55		
+	}}};
+
+MV_BOARD_INFO sheevaPlugInfo = {
+	"SHEEVA PLUG",				                /* boardName[MAX_BOARD_NAME_LEN] */
+	SHEEVA_PLUG_BOARD_MPP_GROUP_TYPE_NUN,		/* numBoardMppGroupType */
+	sheevaPlugInfoBoardMppTypeInfo,
+	SHEEVA_PLUG_BOARD_MPP_CONFIG_NUM,		    /* numBoardMppConfig */
+	sheevaPlugInfoBoardMppConfigValue,
+	0,						                    /* intsGppMaskLow */
+	0,					                        /* intsGppMaskHigh */
+	SHEEVA_PLUG_BOARD_DEVICE_CONFIG_NUM,		/* numBoardDevIf */
+	sheevaPlugInfoBoardDeCsInfo,
+	SHEEVA_PLUG_BOARD_TWSI_DEF_NUM,			    /* numBoardTwsiDev */
+	sheevaPlugInfoBoardTwsiDev,					
+	SHEEVA_PLUG_BOARD_MAC_INFO_NUM,			    /* numBoardMacInfo */
+	sheevaPlugInfoBoardMacInfo,
+	SHEEVA_PLUG_BOARD_GPP_INFO_NUM,			    /* numBoardGppInfo */
+	0,
+	SHEEVA_PLUG_BOARD_DEBUG_LED_NUM,			/* activeLedsNumber */              
+	sheevaPlugInfoBoardDebugLedIf,
+	0,										/* ledsPolarity */		
+	RD_SHEEVA_PLUG_OE_LOW,				            /* gppOutEnLow */
+	RD_SHEEVA_PLUG_OE_HIGH,				        /* gppOutEnHigh */
+	RD_SHEEVA_PLUG_OE_VAL_LOW,				        /* gppOutValLow */
+	RD_SHEEVA_PLUG_OE_VAL_HIGH,				    /* gppOutValHigh */
+	0,						                    /* gppPolarityValLow */
+	0, 						                    /* gppPolarityValHigh */
+    NULL										/* pSwitchInfo */
+};
+
+/* Customer specific board place holder*/
+
+#define DB_CUSTOMER_BOARD_PCI_IF_NUM		        0x0
+#define DB_CUSTOMER_BOARD_TWSI_DEF_NUM		        0x0
+#define DB_CUSTOMER_BOARD_MAC_INFO_NUM		        0x0
+#define DB_CUSTOMER_BOARD_GPP_INFO_NUM		        0x0
+#define DB_CUSTOMER_BOARD_MPP_GROUP_TYPE_NUN        0x0
+#define DB_CUSTOMER_BOARD_MPP_CONFIG_NUM		    0x0
+#if defined(MV_NAND) && defined(MV_NAND_BOOT)
+    #define DB_CUSTOMER_BOARD_DEVICE_CONFIG_NUM	    0x0
+#elif defined(MV_NAND) && defined(MV_SPI_BOOT)
+    #define DB_CUSTOMER_BOARD_DEVICE_CONFIG_NUM	    0x0
+#else
+    #define DB_CUSTOMER_BOARD_DEVICE_CONFIG_NUM	    0x0
+#endif
+#define DB_CUSTOMER_BOARD_DEBUG_LED_NUM		0x0
+
+MV_U8	dbCustomerInfoBoardDebugLedIf[] =
+	{0};
+
+MV_BOARD_MAC_INFO dbCustomerInfoBoardMacInfo[] = 
+    /* {{MV_BOARD_MAC_SPEED	boardMacSpeed,	MV_U8	boardEthSmiAddr}} */
+	{{BOARD_MAC_SPEED_AUTO, 0x0}}; 
+
+MV_BOARD_TWSI_INFO	dbCustomerInfoBoardTwsiDev[] =
+	/* {{MV_BOARD_DEV_CLASS	devClass, MV_U8	twsiDevAddr, MV_U8 twsiDevAddrType}} */
+	{{BOARD_TWSI_OTHER, 0x0, ADDR7_BIT}};
+
+MV_BOARD_MPP_TYPE_INFO dbCustomerInfoBoardMppTypeInfo[] = 
+	{{MV_BOARD_OTHER, MV_BOARD_OTHER}
+	}; 
+
+MV_DEV_CS_INFO dbCustomerInfoBoardDeCsInfo[] = 
+		/*{deviceCS, params, devType, devWidth}*/			   
+#if defined(MV_NAND) && defined(MV_NAND_BOOT)
+		 {{0, N_A, BOARD_DEV_NAND_FLASH, 8}};	   /* NAND DEV */
+#elif defined(MV_NAND) && defined(MV_SPI_BOOT)
+		 {
+         {0, N_A, BOARD_DEV_NAND_FLASH, 8},	   /* NAND DEV */
+         {2, N_A, BOARD_DEV_SPI_FLASH, 8},	   /* SPI DEV */
+         };
+#else
+		 {{2, N_A, BOARD_DEV_SPI_FLASH, 8}};	   /* SPI DEV */         
+#endif
+
+MV_BOARD_MPP_INFO	dbCustomerInfoBoardMppConfigValue[] = 
+	{{{
+	DB_CUSTOMER_MPP0_7,		
+	DB_CUSTOMER_MPP8_15,		
+	DB_CUSTOMER_MPP16_23,		
+	DB_CUSTOMER_MPP24_31,		
+	DB_CUSTOMER_MPP32_39,		
+	DB_CUSTOMER_MPP40_47,		
+	DB_CUSTOMER_MPP48_55		
+	}}};
+
+MV_BOARD_INFO dbCustomerInfo = {
+	"DB-CUSTOMER",				                /* boardName[MAX_BOARD_NAME_LEN] */
+	DB_CUSTOMER_BOARD_MPP_GROUP_TYPE_NUN,		/* numBoardMppGroupType */
+	dbCustomerInfoBoardMppTypeInfo,
+	DB_CUSTOMER_BOARD_MPP_CONFIG_NUM,		    /* numBoardMppConfig */
+	dbCustomerInfoBoardMppConfigValue,
+	0,						                    /* intsGppMaskLow */
+	0,					                        /* intsGppMaskHigh */
+	DB_CUSTOMER_BOARD_DEVICE_CONFIG_NUM,		/* numBoardDevIf */
+	dbCustomerInfoBoardDeCsInfo,
+	DB_CUSTOMER_BOARD_TWSI_DEF_NUM,			    /* numBoardTwsiDev */
+	dbCustomerInfoBoardTwsiDev,					
+	DB_CUSTOMER_BOARD_MAC_INFO_NUM,			    /* numBoardMacInfo */
+	dbCustomerInfoBoardMacInfo,
+	DB_CUSTOMER_BOARD_GPP_INFO_NUM,			    /* numBoardGppInfo */
+	0,
+	DB_CUSTOMER_BOARD_DEBUG_LED_NUM,			/* activeLedsNumber */              
+	NULL,
+	0,										/* ledsPolarity */		
+	DB_CUSTOMER_OE_LOW,				            /* gppOutEnLow */
+	DB_CUSTOMER_OE_HIGH,				        /* gppOutEnHigh */
+	DB_CUSTOMER_OE_VAL_LOW,				        /* gppOutValLow */
+	DB_CUSTOMER_OE_VAL_HIGH,				    /* gppOutValHigh */
+	0,						                    /* gppPolarityValLow */
+	0, 						                    /* gppPolarityValHigh */
+    NULL										/* pSwitchInfo */
+};
+
+MV_BOARD_INFO*	boardInfoTbl[] = 	{
+                    &db88f6281AInfo,
+                    &rd88f6281AInfo,
+                    &db88f6192AInfo,
+                    &rd88f6192AInfo,
+                    &db88f6180AInfo,
+                    &db88f6190AInfo,
+                    &rd88f6190AInfo,
+                    &rd88f6281APcacInfo,
+                    &dbCustomerInfo,
+                    &sheevaPlugInfo
+					};
+
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvSpec.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvSpec.h
new file mode 100644
index 0000000000..0372eee5dc
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvSpec.h
@@ -0,0 +1,262 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED.  The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer.
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    *   Neither the name of Marvell nor the names of its contributors may be
+        used to endorse or promote products derived from this software without
+        specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvBoardEnvSpech
+#define __INCmvBoardEnvSpech
+
+#include "mvSysHwConfig.h"
+
+
+/* For future use */
+#define BD_ID_DATA_START_OFFS		0x0
+#define BD_DETECT_SEQ_OFFS		0x0
+#define BD_SYS_NUM_OFFS			0x4
+#define BD_NAME_OFFS			0x8
+
+/* I2C bus addresses */
+#define MV_BOARD_CTRL_I2C_ADDR			0x0     /* Controller slave addr */
+#define MV_BOARD_CTRL_I2C_ADDR_TYPE 		ADDR7_BIT
+#define MV_BOARD_DIMM0_I2C_ADDR			0x56
+#define MV_BOARD_DIMM0_I2C_ADDR_TYPE 		ADDR7_BIT
+#define MV_BOARD_DIMM1_I2C_ADDR			0x54
+#define MV_BOARD_DIMM1_I2C_ADDR_TYPE 		ADDR7_BIT
+#define MV_BOARD_EEPROM_I2C_ADDR	    	0x51
+#define MV_BOARD_EEPROM_I2C_ADDR_TYPE 		ADDR7_BIT
+#define MV_BOARD_MAIN_EEPROM_I2C_ADDR	   	0x50
+#define MV_BOARD_MAIN_EEPROM_I2C_ADDR_TYPE 	ADDR7_BIT
+#define MV_BOARD_MUX_I2C_ADDR_ENTRY		0x2
+#define MV_BOARD_DIMM_I2C_CHANNEL		0x0
+
+#define BOOT_FLASH_INDEX			0
+#define MAIN_FLASH_INDEX			1
+
+#define BOARD_ETH_START_PORT_NUM	0
+
+/* Supported clocks */
+#define MV_BOARD_TCLK_100MHZ	100000000
+#define MV_BOARD_TCLK_125MHZ	125000000
+#define MV_BOARD_TCLK_133MHZ	133333333
+#define MV_BOARD_TCLK_150MHZ	150000000
+#define MV_BOARD_TCLK_166MHZ	166666667
+#define MV_BOARD_TCLK_200MHZ	200000000
+
+#define MV_BOARD_SYSCLK_100MHZ	100000000
+#define MV_BOARD_SYSCLK_125MHZ	125000000
+#define MV_BOARD_SYSCLK_133MHZ	133333333
+#define MV_BOARD_SYSCLK_150MHZ	150000000
+#define MV_BOARD_SYSCLK_166MHZ	166666667
+#define MV_BOARD_SYSCLK_200MHZ	200000000
+#define MV_BOARD_SYSCLK_233MHZ	233333333
+#define MV_BOARD_SYSCLK_250MHZ	250000000
+#define MV_BOARD_SYSCLK_267MHZ	266666667
+#define MV_BOARD_SYSCLK_300MHZ	300000000
+#define MV_BOARD_SYSCLK_333MHZ	333333334
+#define MV_BOARD_SYSCLK_400MHZ	400000000
+
+#define MV_BOARD_REFCLK_25MHZ	 25000000
+
+/* Board specific */
+/* =============================== */
+
+/* boards ID numbers */
+
+#define BOARD_ID_BASE           		0x0
+
+/* New board ID numbers */
+#define DB_88F6281A_BP_ID			(BOARD_ID_BASE)
+#define DB_88F6281_BP_MLL_ID        1680
+#define RD_88F6281A_ID				(BOARD_ID_BASE+0x1)
+#define RD_88F6281_MLL_ID			1682
+#define DB_88F6192A_BP_ID			(BOARD_ID_BASE+0x2)
+#define RD_88F6192A_ID				(BOARD_ID_BASE+0x3)
+#define RD_88F6192_MLL_ID			1681
+#define DB_88F6180A_BP_ID			(BOARD_ID_BASE+0x4)
+#define DB_88F6190A_BP_ID			(BOARD_ID_BASE+0x5)
+#define RD_88F6190A_ID				(BOARD_ID_BASE+0x6)
+#define RD_88F6281A_PCAC_ID			(BOARD_ID_BASE+0x7)
+#define DB_CUSTOMER_ID			    (BOARD_ID_BASE+0x8)
+#define SHEEVA_PLUG_ID			    (BOARD_ID_BASE+0x9)
+#define MV_MAX_BOARD_ID 			(SHEEVA_PLUG_ID + 1)
+
+/* DB-88F6281A-BP */
+#if defined(MV_NAND)
+    #define DB_88F6281A_MPP0_7                   	0x21111111
+#else
+    #define DB_88F6281A_MPP0_7                   	0x21112220
+#endif
+#define DB_88F6281A_MPP8_15                   	0x11113311
+#define DB_88F6281A_MPP16_23                   	0x00551111
+#define DB_88F6281A_MPP24_31                   	0x00000000
+#define DB_88F6281A_MPP32_39                   	0x00000000
+#define DB_88F6281A_MPP40_47                   	0x00000000
+#define DB_88F6281A_MPP48_55                   	0x00000000
+#define DB_88F6281A_OE_LOW                       0x0
+#if defined(MV_TDM_5CHANNELS)
+	#define DB_88F6281A_OE_HIGH		(BIT6)
+#else
+#define DB_88F6281A_OE_HIGH                      0x0
+#endif
+#define DB_88F6281A_OE_VAL_LOW                   0x0
+#define DB_88F6281A_OE_VAL_HIGH                  0x0
+
+/* RD-88F6281A */
+#if defined(MV_NAND)
+    #define RD_88F6281A_MPP0_7                   	0x21111111
+#else
+    #define RD_88F6281A_MPP0_7                   	0x21112220
+#endif
+#define RD_88F6281A_MPP8_15                   	0x11113311
+#define RD_88F6281A_MPP16_23                   	0x33331111
+#define RD_88F6281A_MPP24_31                   	0x33003333
+#define RD_88F6281A_MPP32_39                   	0x20440533
+#define RD_88F6281A_MPP40_47                   	0x22202222
+#define RD_88F6281A_MPP48_55                   	0x00000002
+#define RD_88F6281A_OE_LOW                      (BIT28 | BIT29)
+#define RD_88F6281A_OE_HIGH                     (BIT3 | BIT6 | BIT17)
+#define RD_88F6281A_OE_VAL_LOW                   0x0
+#define RD_88F6281A_OE_VAL_HIGH                  0x0
+
+/* DB-88F6192A-BP */
+#if defined(MV_NAND)
+    #define DB_88F6192A_MPP0_7                   	0x21111111
+#else
+    #define DB_88F6192A_MPP0_7                   	0x21112220
+#endif
+#define DB_88F6192A_MPP8_15                   	0x11113311
+#define DB_88F6192A_MPP16_23                   	0x00501111
+#define DB_88F6192A_MPP24_31                   	0x00000000
+#define DB_88F6192A_MPP32_35                   	0x00000000
+#define DB_88F6192A_OE_LOW                       (BIT22 | BIT23)
+#define DB_88F6192A_OE_HIGH                      0x0
+#define DB_88F6192A_OE_VAL_LOW                   0x0
+#define DB_88F6192A_OE_VAL_HIGH                  0x0
+
+/* RD-88F6192A */
+#define RD_88F6192A_MPP0_7                   	0x01222222
+#define RD_88F6192A_MPP8_15                   	0x00000011
+#define RD_88F6192A_MPP16_23                   	0x05550000
+#define RD_88F6192A_MPP24_31                   	0x0
+#define RD_88F6192A_MPP32_35                   	0x0
+#define RD_88F6192A_OE_LOW                      (BIT11 | BIT14 | BIT24 | BIT25 | BIT26 | BIT27 | BIT30 | BIT31)
+#define RD_88F6192A_OE_HIGH                     (BIT0 | BIT2)
+#define RD_88F6192A_OE_VAL_LOW                  0x18400
+#define RD_88F6192A_OE_VAL_HIGH                 0x8
+
+/* DB-88F6180A-BP */
+#if defined(MV_NAND)
+    #define DB_88F6180A_MPP0_7                   	0x21111111
+#else
+    #define DB_88F6180A_MPP0_7                   	0x01112222
+#endif
+#define DB_88F6180A_MPP8_15                   	0x11113311
+#define DB_88F6180A_MPP16_23                   	0x00001111
+#define DB_88F6180A_MPP24_31                   	0x0
+#define DB_88F6180A_MPP32_39                   	0x4444c000
+#define DB_88F6180A_MPP40_44                   	0x00044444
+#define DB_88F6180A_OE_LOW                       0x0
+#define DB_88F6180A_OE_HIGH                      0x0
+#define DB_88F6180A_OE_VAL_LOW                   0x0
+#define DB_88F6180A_OE_VAL_HIGH                  0x0
+
+/* RD-88F6281A_PCAC */
+#define RD_88F6281A_PCAC_MPP0_7                	0x21111111
+#define RD_88F6281A_PCAC_MPP8_15               	0x00003311
+#define RD_88F6281A_PCAC_MPP16_23              	0x00001100
+#define RD_88F6281A_PCAC_MPP24_31              	0x00000000
+#define RD_88F6281A_PCAC_MPP32_39              	0x00000000
+#define RD_88F6281A_PCAC_MPP40_47              	0x00000000
+#define RD_88F6281A_PCAC_MPP48_55              	0x00000000
+#define RD_88F6281A_PCAC_OE_LOW                 0x0
+#define RD_88F6281A_PCAC_OE_HIGH                0x0
+#define RD_88F6281A_PCAC_OE_VAL_LOW             0x0
+#define RD_88F6281A_PCAC_OE_VAL_HIGH            0x0
+
+/* SHEEVA PLUG */
+#define RD_SHEEVA_PLUG_MPP0_7                   0x01111111
+#define RD_SHEEVA_PLUG_MPP8_15                  0x11113322
+#define RD_SHEEVA_PLUG_MPP16_23                 0x00001111
+#define RD_SHEEVA_PLUG_MPP24_31                 0x00100000
+#define RD_SHEEVA_PLUG_MPP32_39                 0x00000000
+#define RD_SHEEVA_PLUG_MPP40_47                 0x00000000
+#define RD_SHEEVA_PLUG_MPP48_55                 0x00000000
+#define RD_SHEEVA_PLUG_OE_LOW                   0x0
+#define RD_SHEEVA_PLUG_OE_HIGH                  0x0
+#define RD_SHEEVA_PLUG_OE_VAL_LOW               (BIT29)
+#define RD_SHEEVA_PLUG_OE_VAL_HIGH              ((~(BIT17 | BIT16 | BIT15)) | BIT14) 
+
+/* DB-CUSTOMER */
+#define DB_CUSTOMER_MPP0_7                	    0x21111111
+#define DB_CUSTOMER_MPP8_15               	    0x00003311
+#define DB_CUSTOMER_MPP16_23              	    0x00001100
+#define DB_CUSTOMER_MPP24_31              	    0x00000000
+#define DB_CUSTOMER_MPP32_39              	    0x00000000
+#define DB_CUSTOMER_MPP40_47              	    0x00000000
+#define DB_CUSTOMER_MPP48_55              	    0x00000000
+#define DB_CUSTOMER_OE_LOW                      0x0
+#define DB_CUSTOMER_OE_HIGH                     (~((BIT6) | (BIT7) | (BIT8) | (BIT9)))
+#define DB_CUSTOMER_OE_VAL_LOW                  0x0
+#define DB_CUSTOMER_OE_VAL_HIGH                 0x0
+
+#endif /* __INCmvBoardEnvSpech */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/cpu/mvCpu.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/cpu/mvCpu.c
new file mode 100644
index 0000000000..fed0fa114e
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/cpu/mvCpu.c
@@ -0,0 +1,320 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#include "cpu/mvCpu.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "ctrlEnv/mvCtrlEnvRegs.h"
+#include "ctrlEnv/sys/mvCpuIfRegs.h"
+
+/* defines  */
+#ifdef MV_DEBUG
+	#define DB(x)	x
+#else
+	#define DB(x)
+#endif	
+
+/* locals */
+
+/*******************************************************************************
+* mvCpuPclkGet - Get the CPU pClk (pipe clock)
+*
+* DESCRIPTION:
+*       This routine extract the CPU core clock.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       32bit clock cycles in MHertz.
+*
+*******************************************************************************/
+/* 6180 have different clk reset sampling */
+
+static MV_U32 mvCpu6180PclkGet(MV_VOID)
+{
+	MV_U32 	tmpPClkRate=0;
+	MV_CPU_ARM_CLK cpu6180_ddr_l2_CLK[] = MV_CPU6180_DDR_L2_CLCK_TBL;
+
+	tmpPClkRate = MV_REG_READ(MPP_SAMPLE_AT_RESET);
+	tmpPClkRate = tmpPClkRate & MSAR_CPUCLCK_MASK_6180;
+	tmpPClkRate = tmpPClkRate >> MSAR_CPUCLCK_OFFS_6180;
+			
+	tmpPClkRate = cpu6180_ddr_l2_CLK[tmpPClkRate].cpuClk;
+
+	return tmpPClkRate;
+}
+
+
+MV_U32 mvCpuPclkGet(MV_VOID)
+{
+#if defined(PCLCK_AUTO_DETECT)
+	MV_U32 	tmpPClkRate=0;
+	MV_U32 cpuCLK[] = MV_CPU_CLCK_TBL;
+
+	if(mvCtrlModelGet() == MV_6180_DEV_ID)
+		return mvCpu6180PclkGet();
+
+	tmpPClkRate = MV_REG_READ(MPP_SAMPLE_AT_RESET);
+	tmpPClkRate = MSAR_CPUCLCK_EXTRACT(tmpPClkRate);
+	tmpPClkRate = cpuCLK[tmpPClkRate];
+
+	return tmpPClkRate;
+#else
+	return MV_DEFAULT_PCLK
+#endif
+}
+
+/*******************************************************************************
+* mvCpuL2ClkGet - Get the CPU L2 (CPU bus clock)
+*
+* DESCRIPTION:
+*       This routine extract the CPU L2 clock.
+*
+* RETURN:
+*       32bit clock cycles in Hertz.
+*
+*******************************************************************************/
+static MV_U32  mvCpu6180L2ClkGet(MV_VOID)
+{
+	MV_U32 	L2ClkRate=0;
+	MV_CPU_ARM_CLK _cpu6180_ddr_l2_CLK[] = MV_CPU6180_DDR_L2_CLCK_TBL;
+
+	L2ClkRate = MV_REG_READ(MPP_SAMPLE_AT_RESET);
+	L2ClkRate = L2ClkRate & MSAR_CPUCLCK_MASK_6180;
+	L2ClkRate = L2ClkRate >> MSAR_CPUCLCK_OFFS_6180;
+			
+	L2ClkRate = _cpu6180_ddr_l2_CLK[L2ClkRate].l2Clk;
+
+	return L2ClkRate;
+
+}
+
+MV_U32  mvCpuL2ClkGet(MV_VOID)
+{
+#ifdef L2CLK_AUTO_DETECT
+	MV_U32 L2ClkRate, tmp, pClkRate, indexL2Rtio;
+	MV_U32 L2Rtio[][2] = MV_L2_CLCK_RTIO_TBL;
+
+	if(mvCtrlModelGet() == MV_6180_DEV_ID)
+		return mvCpu6180L2ClkGet();
+
+	pClkRate = mvCpuPclkGet();
+
+	tmp = MV_REG_READ(MPP_SAMPLE_AT_RESET);
+	indexL2Rtio = MSAR_L2CLCK_EXTRACT(tmp);
+
+	L2ClkRate = ((pClkRate * L2Rtio[indexL2Rtio][1]) / L2Rtio[indexL2Rtio][0]);
+
+	return L2ClkRate;
+#else
+	return MV_BOARD_DEFAULT_L2CLK;
+#endif
+}
+
+
+/*******************************************************************************
+* mvCpuNameGet - Get CPU name
+*
+* DESCRIPTION:
+*       This function returns a string describing the CPU model and revision.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       pNameBuff - Buffer to contain board name string. Minimum size 32 chars.
+*
+* RETURN:
+*       None.
+*******************************************************************************/
+MV_VOID mvCpuNameGet(char *pNameBuff)
+{
+    MV_U32 cpuModel;
+    
+    cpuModel = mvOsCpuPartGet();
+
+    /* The CPU module is indicated in the Processor Version Register (PVR) */
+    switch(cpuModel)
+    {
+        case CPU_PART_MRVL131:
+            mvOsSPrintf(pNameBuff, "%s (Rev %d)", "Marvell Feroceon",mvOsCpuRevGet());
+            break;
+        case CPU_PART_ARM926:
+            mvOsSPrintf(pNameBuff, "%s (Rev %d)", "ARM926",mvOsCpuRevGet());
+            break;
+	case CPU_PART_ARM946:
+		mvOsSPrintf(pNameBuff, "%s (Rev %d)", "ARM946",mvOsCpuRevGet());
+		break;
+        default:
+            mvOsSPrintf(pNameBuff,"??? (0x%04x) (Rev %d)",cpuModel,mvOsCpuRevGet());
+            break;
+    }  /* switch  */
+
+    return;
+}
+
+
+#define MV_PROC_STR_SIZE 50
+
+static void mvCpuIfGetL2EccMode(MV_8 *buf)
+{
+    MV_U32 regVal = MV_REG_READ(CPU_L2_CONFIG_REG);
+    if (regVal & BIT2)
+	mvOsSPrintf(buf, "L2 ECC Enabled");
+    else
+	mvOsSPrintf(buf, "L2 ECC Disabled");
+}
+
+static void mvCpuIfGetL2Mode(MV_8 *buf)
+{
+    MV_U32 regVal = 0;
+    __asm volatile ("mrc	p15, 1, %0, c15, c1, 0" : "=r" (regVal)); /* Read Marvell extra features register */
+    if (regVal & BIT22)
+	mvOsSPrintf(buf, "L2 Enabled");
+    else
+	mvOsSPrintf(buf, "L2 Disabled");
+}
+
+static void mvCpuIfGetL2PrefetchMode(MV_8 *buf)
+{
+    MV_U32 regVal = 0;
+    __asm volatile ("mrc	p15, 1, %0, c15, c1, 0" : "=r" (regVal)); /* Read Marvell extra features register */
+    if (regVal & BIT24)
+	mvOsSPrintf(buf, "L2 Prefetch Disabled");
+    else
+	mvOsSPrintf(buf, "L2 Prefetch Enabled");
+}
+
+static void mvCpuIfGetWriteAllocMode(MV_8 *buf)
+{
+    MV_U32 regVal = 0;
+    __asm volatile ("mrc	p15, 1, %0, c15, c1, 0" : "=r" (regVal)); /* Read Marvell extra features register */
+    if (regVal & BIT28)
+	mvOsSPrintf(buf, "Write Allocate Enabled");
+    else
+	mvOsSPrintf(buf, "Write Allocate Disabled");
+}
+
+static void mvCpuIfGetCpuStreamMode(MV_8 *buf)
+{
+    MV_U32 regVal = 0;
+    __asm volatile ("mrc	p15, 1, %0, c15, c1, 0" : "=r" (regVal)); /* Read Marvell extra features register */
+    if (regVal & BIT29)
+	mvOsSPrintf(buf, "CPU Streaming Enabled");
+    else
+	mvOsSPrintf(buf, "CPU Streaming Disabled");
+}
+
+static void mvCpuIfPrintCpuRegs(void)
+{
+    MV_U32 regVal = 0;
+
+    __asm volatile ("mrc p15, 1, %0, c15, c1, 0" : "=r" (regVal)); /* Read Marvell extra features register */
+    mvOsPrintf("Extra Feature Reg = 0x%x\n",regVal);
+
+   __asm volatile ("mrc	p15, 0, %0, c1, c0, 0" : "=r" (regVal)); /* Read Control register */
+   mvOsPrintf("Control Reg = 0x%x\n",regVal);
+
+   __asm volatile ("mrc	p15, 0, %0, c0, c0, 0" : "=r" (regVal)); /* Read ID Code register */
+    mvOsPrintf("ID Code Reg = 0x%x\n",regVal);
+
+   __asm volatile ("mrc	p15, 0, %0, c0, c0, 1" : "=r" (regVal)); /* Read Cache Type register */
+   mvOsPrintf("Cache Type Reg = 0x%x\n",regVal);
+
+}
+
+MV_U32 mvCpuIfPrintSystemConfig(MV_8 *buffer, MV_U32 index)
+{
+  MV_U32 count = 0;
+  
+  MV_8 L2_ECC_str[MV_PROC_STR_SIZE];
+  MV_8 L2_En_str[MV_PROC_STR_SIZE];
+  MV_8 L2_Prefetch_str[MV_PROC_STR_SIZE];
+  MV_8 Write_Alloc_str[MV_PROC_STR_SIZE];
+  MV_8 Cpu_Stream_str[MV_PROC_STR_SIZE];
+  
+  mvCpuIfGetL2Mode(L2_En_str);
+  mvCpuIfGetL2EccMode(L2_ECC_str); 
+  mvCpuIfGetL2PrefetchMode(L2_Prefetch_str);
+  mvCpuIfGetWriteAllocMode(Write_Alloc_str);
+  mvCpuIfGetCpuStreamMode(Cpu_Stream_str);
+  mvCpuIfPrintCpuRegs();
+  
+  count += mvOsSPrintf(buffer + count + index, "%s\n", L2_En_str);
+  count += mvOsSPrintf(buffer + count + index, "%s\n", L2_ECC_str);
+  count += mvOsSPrintf(buffer + count + index, "%s\n", L2_Prefetch_str);
+  count += mvOsSPrintf(buffer + count + index, "%s\n", Write_Alloc_str);
+  count += mvOsSPrintf(buffer + count + index, "%s\n", Cpu_Stream_str);
+  return count;
+}
+
+MV_U32 whoAmI(MV_VOID)
+{
+	return 0;
+}
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/cpu/mvCpu.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/cpu/mvCpu.h
new file mode 100644
index 0000000000..7f58b03f1f
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/cpu/mvCpu.h
@@ -0,0 +1,99 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvCpuh
+#define __INCmvCpuh
+
+#include "mvCommon.h"
+#include "mvOs.h"
+#include "ctrlEnv/mvCtrlEnvSpec.h"
+
+/* defines */
+#define CPU_PART_MRVL131      0x131
+#define CPU_PART_ARM926       0x926
+#define CPU_PART_ARM946       0x946
+#define MV_CPU_ARM_CLK_ELM_SIZE	    12
+#define MV_CPU_ARM_CLK_RATIO_OFF    8
+#define MV_CPU_ARM_CLK_DDR_OFF	    4
+
+#ifndef MV_ASMLANGUAGE
+typedef struct _mvCpuArmClk 
+{
+	MV_U32	      cpuClk;	  /* CPU clock in MHz */
+	MV_U32	      ddrClk;	  /* DDR clock in MHz */
+	MV_U32	      l2Clk;	  /* CPU DDR clock ratio */
+
+}MV_CPU_ARM_CLK;
+
+MV_U32    mvCpuPclkGet(MV_VOID);
+MV_VOID   mvCpuNameGet(char *pNameBuff);
+MV_U32  mvCpuL2ClkGet(MV_VOID);
+MV_U32 mvCpuIfPrintSystemConfig(MV_8 *buffer, MV_U32 index);
+MV_U32 whoAmI(MV_VOID);
+
+#endif /* MV_ASMLANGUAGE */
+
+
+#endif /* __INCmvCpuh */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvAddrDec.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvAddrDec.c
new file mode 100644
index 0000000000..2d148e0fc9
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvAddrDec.c
@@ -0,0 +1,296 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+/*******************************************************************************
+* mvCtrlEnvAddrDec.h - Marvell controller address decode library
+*
+* DESCRIPTION:
+*
+* DEPENDENCIES:
+*       None.
+*
+*******************************************************************************/
+
+/* includes */
+#include "ctrlEnv/mvCtrlEnvAddrDec.h"
+#include "ctrlEnv/sys/mvAhbToMbusRegs.h"
+#include "ddr2/mvDramIfRegs.h"
+#include "pex/mvPexRegs.h"
+
+#define MV_DEBUG
+
+/* defines  */
+#ifdef MV_DEBUG
+	#define DB(x)	x
+#else
+	#define DB(x)
+#endif
+	
+/* Default Attributes array */
+MV_TARGET_ATTRIB	mvTargetDefaultsArray[] = TARGETS_DEF_ARRAY;
+extern MV_TARGET 	*sampleAtResetTargetArray;
+/* Dram\AHBToMbus\PEX share regsiter */
+
+#define CTRL_DEC_BASE_OFFS		16
+#define CTRL_DEC_BASE_MASK		(0xffff << CTRL_DEC_BASE_OFFS)
+#define CTRL_DEC_BASE_ALIGNMENT	0x10000
+
+#define CTRL_DEC_SIZE_OFFS		16
+#define CTRL_DEC_SIZE_MASK		(0xffff << CTRL_DEC_SIZE_OFFS)
+#define CTRL_DEC_SIZE_ALIGNMENT	0x10000
+
+#define CTRL_DEC_WIN_EN			BIT0
+
+
+
+/*******************************************************************************
+* mvCtrlAddrDecToReg - Get address decode register format values
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+*
+*******************************************************************************/
+MV_STATUS mvCtrlAddrDecToReg(MV_ADDR_WIN *pAddrDecWin, MV_DEC_REGS *pAddrDecRegs)
+{
+
+	MV_U32 baseToReg=0 , sizeToReg=0;
+    
+	/* BaseLow[31:16] => base register [31:16]		*/
+	baseToReg = pAddrDecWin->baseLow & CTRL_DEC_BASE_MASK;
+
+	/* Write to address decode Base Address Register                  */
+	pAddrDecRegs->baseReg &= ~CTRL_DEC_BASE_MASK;
+	pAddrDecRegs->baseReg |= baseToReg;
+
+	/* Get size register value according to window size						*/
+	sizeToReg = ctrlSizeToReg(pAddrDecWin->size, CTRL_DEC_SIZE_ALIGNMENT);
+	
+	/* Size parameter validity check.                                   */
+	if (-1 == sizeToReg)
+	{
+		return MV_BAD_PARAM;
+	}
+
+	/* set size */
+	pAddrDecRegs->sizeReg &= ~CTRL_DEC_SIZE_MASK;
+	pAddrDecRegs->sizeReg |= (sizeToReg << CTRL_DEC_SIZE_OFFS);
+	
+
+	return MV_OK;
+
+}
+
+/*******************************************************************************
+* mvCtrlRegToAddrDec - Extract address decode struct from registers.
+*
+* DESCRIPTION:
+*       This function extract address decode struct from address decode 
+*       registers given as parameters.
+*
+* INPUT:
+*       pAddrDecRegs - Address decode register struct.
+*
+* OUTPUT:
+*       pAddrDecWin - Target window data structure.
+*
+* RETURN:
+*		MV_BAD_PARAM if address decode registers data is invalid.
+*
+*******************************************************************************/
+MV_STATUS mvCtrlRegToAddrDec(MV_DEC_REGS *pAddrDecRegs, MV_ADDR_WIN *pAddrDecWin)
+{
+	MV_U32 sizeRegVal;
+	
+	sizeRegVal = (pAddrDecRegs->sizeReg & CTRL_DEC_SIZE_MASK) >> 
+					CTRL_DEC_SIZE_OFFS;
+
+	pAddrDecWin->size = ctrlRegToSize(sizeRegVal, CTRL_DEC_SIZE_ALIGNMENT);
+
+
+	/* Extract base address						*/
+	/* Base register [31:16] ==> baseLow[31:16] 		*/
+	pAddrDecWin->baseLow = pAddrDecRegs->baseReg & CTRL_DEC_BASE_MASK;
+
+	pAddrDecWin->baseHigh =  0;
+
+	return MV_OK;
+    
+}
+
+/*******************************************************************************
+* mvCtrlAttribGet - 
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+*
+*******************************************************************************/
+
+MV_STATUS mvCtrlAttribGet(MV_TARGET target,
+						  MV_TARGET_ATTRIB *targetAttrib)
+{
+
+	targetAttrib->attrib = mvTargetDefaultsArray[MV_CHANGE_BOOT_CS(target)].attrib;
+	targetAttrib->targetId = mvTargetDefaultsArray[MV_CHANGE_BOOT_CS(target)].targetId;
+
+	return MV_OK;
+
+}
+
+/*******************************************************************************
+* mvCtrlGetAttrib - 
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+*
+*******************************************************************************/
+MV_TARGET mvCtrlTargetGet(MV_TARGET_ATTRIB *targetAttrib)
+{
+	MV_TARGET target;
+	MV_TARGET x;
+	for (target = SDRAM_CS0; target < MAX_TARGETS ; target ++)
+	{
+		x = MV_CHANGE_BOOT_CS(target);
+		if ((mvTargetDefaultsArray[x].attrib == targetAttrib->attrib) &&
+			(mvTargetDefaultsArray[MV_CHANGE_BOOT_CS(target)].targetId == targetAttrib->targetId))
+		{
+			/* found it */
+			break;
+		}
+	}
+
+	return target;
+}
+
+MV_STATUS mvCtrlAddrDecToParams(MV_DEC_WIN *pAddrDecWin, 
+                                MV_DEC_WIN_PARAMS *pWinParam)
+{
+	MV_U32 baseToReg=0, sizeToReg=0;
+    
+	/* BaseLow[31:16] => base register [31:16]		*/
+	baseToReg = pAddrDecWin->addrWin.baseLow & CTRL_DEC_BASE_MASK;
+
+	/* Write to address decode Base Address Register                  */
+	pWinParam->baseAddr &= ~CTRL_DEC_BASE_MASK;
+	pWinParam->baseAddr |= baseToReg;
+
+	/* Get size register value according to window size						*/
+	sizeToReg = ctrlSizeToReg(pAddrDecWin->addrWin.size, CTRL_DEC_SIZE_ALIGNMENT);
+	
+	/* Size parameter validity check.                                   */
+	if (-1 == sizeToReg)
+	{
+        mvOsPrintf("mvCtrlAddrDecToParams: ERR. ctrlSizeToReg failed.\n");
+		return MV_BAD_PARAM;
+	}
+    pWinParam->size = sizeToReg;
+
+    pWinParam->attrib   = mvTargetDefaultsArray[MV_CHANGE_BOOT_CS(pAddrDecWin->target)].attrib;
+    pWinParam->targetId = mvTargetDefaultsArray[MV_CHANGE_BOOT_CS(pAddrDecWin->target)].targetId;
+
+    return MV_OK;
+}
+
+MV_STATUS mvCtrlParamsToAddrDec(MV_DEC_WIN_PARAMS *pWinParam, 
+                                MV_DEC_WIN *pAddrDecWin)
+{
+    MV_TARGET_ATTRIB    targetAttrib;
+
+    pAddrDecWin->addrWin.baseLow = pWinParam->baseAddr;
+	
+	/* Upper 32bit address base is supported under PCI High Address remap */
+	pAddrDecWin->addrWin.baseHigh = 0;	
+
+	/* Prepare sizeReg to ctrlRegToSize function */
+    pAddrDecWin->addrWin.size = ctrlRegToSize(pWinParam->size, CTRL_DEC_SIZE_ALIGNMENT);
+
+	if (-1 == pAddrDecWin->addrWin.size)
+	{
+		DB(mvOsPrintf("mvCtrlParamsToAddrDec: ERR. ctrlRegToSize failed.\n"));
+		return MV_BAD_PARAM;
+	}
+    targetAttrib.targetId = pWinParam->targetId;
+    targetAttrib.attrib = pWinParam->attrib;
+
+    pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib);
+
+    return MV_OK;
+}
+
+
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvAddrDec.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvAddrDec.h
new file mode 100644
index 0000000000..30efe98ce9
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvAddrDec.h
@@ -0,0 +1,203 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvCtrlEnvAddrDech
+#define __INCmvCtrlEnvAddrDech
+
+/* includes */
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "ctrlEnv/mvCtrlEnvRegs.h"
+
+
+/* defines  */
+/* DUnit attributes */
+#define ATMWCR_WIN_DUNIT_CS0_OFFS			0
+#define ATMWCR_WIN_DUNIT_CS0_MASK			BIT0
+#define ATMWCR_WIN_DUNIT_CS0_REQ			(0 << ATMWCR_WIN_DUNIT_CS0_OFFS)
+
+#define ATMWCR_WIN_DUNIT_CS1_OFFS			1
+#define ATMWCR_WIN_DUNIT_CS1_MASK			BIT1
+#define ATMWCR_WIN_DUNIT_CS1_REQ 			(0 << ATMWCR_WIN_DUNIT_CS1_OFFS)
+
+#define ATMWCR_WIN_DUNIT_CS2_OFFS			2
+#define ATMWCR_WIN_DUNIT_CS2_MASK			BIT2
+#define ATMWCR_WIN_DUNIT_CS2_REQ 			(0 << ATMWCR_WIN_DUNIT_CS2_OFFS)
+
+#define ATMWCR_WIN_DUNIT_CS3_OFFS			3
+#define ATMWCR_WIN_DUNIT_CS3_MASK			BIT3
+#define ATMWCR_WIN_DUNIT_CS3_REQ 			(0 << ATMWCR_WIN_DUNIT_CS3_OFFS)
+
+/* RUnit (Device)  attributes */
+#define ATMWCR_WIN_RUNIT_DEVCS0_OFFS		0
+#define ATMWCR_WIN_RUNIT_DEVCS0_MASK		BIT0
+#define ATMWCR_WIN_RUNIT_DEVCS0_REQ			(0 << ATMWCR_WIN_RUNIT_DEVCS0_OFFS)
+
+#define ATMWCR_WIN_RUNIT_DEVCS1_OFFS		1
+#define ATMWCR_WIN_RUNIT_DEVCS1_MASK		BIT1
+#define ATMWCR_WIN_RUNIT_DEVCS1_REQ 		(0 << ATMWCR_WIN_RUNIT_DEVCS1_OFFS)
+
+#define ATMWCR_WIN_RUNIT_DEVCS2_OFFS		2
+#define ATMWCR_WIN_RUNIT_DEVCS2_MASK		BIT2
+#define ATMWCR_WIN_RUNIT_DEVCS2_REQ 		(0 << ATMWCR_WIN_RUNIT_DEVCS2_OFFS)
+
+#define ATMWCR_WIN_RUNIT_BOOTCS_OFFS		4
+#define ATMWCR_WIN_RUNIT_BOOTCS_MASK		BIT4
+#define ATMWCR_WIN_RUNIT_BOOTCS_REQ 		(0 << ATMWCR_WIN_RUNIT_BOOTCS_OFFS)
+
+/* LMaster (PCI)  attributes */
+#define ATMWCR_WIN_LUNIT_BYTE_SWP_OFFS		0
+#define ATMWCR_WIN_LUNIT_BYTE_SWP_MASK		BIT0
+#define ATMWCR_WIN_LUNIT_BYTE_SWP			(0 << ATMWCR_WIN_LUNIT_BYTE_SWP_OFFS)
+#define ATMWCR_WIN_LUNIT_BYTE_NO_SWP		(1 << ATMWCR_WIN_LUNIT_BYTE_SWP_OFFS)
+
+
+#define ATMWCR_WIN_LUNIT_WORD_SWP_OFFS		1
+#define ATMWCR_WIN_LUNIT_WORD_SWP_MASK		BIT1
+#define ATMWCR_WIN_LUNIT_WORD_SWP			(0 << ATMWCR_WIN_LUNIT_WORD_SWP_OFFS)
+#define ATMWCR_WIN_LUNIT_WORD_NO_SWP		(1 << ATMWCR_WIN_LUNIT_WORD_SWP_OFFS)
+
+#define ATMWCR_WIN_LUNIT_NO_SNOOP			BIT2
+
+#define ATMWCR_WIN_LUNIT_TYPE_OFFS			3
+#define ATMWCR_WIN_LUNIT_TYPE_MASK			BIT3
+#define ATMWCR_WIN_LUNIT_TYPE_IO			(0 << ATMWCR_WIN_LUNIT_TYPE_OFFS)
+#define ATMWCR_WIN_LUNIT_TYPE_MEM			(1 << ATMWCR_WIN_LUNIT_TYPE_OFFS)
+
+#define ATMWCR_WIN_LUNIT_FORCE64_OFFS		4
+#define ATMWCR_WIN_LUNIT_FORCE64_MASK		BIT4
+#define ATMWCR_WIN_LUNIT_FORCE64			(0 << ATMWCR_WIN_LUNIT_FORCE64_OFFS)
+
+#define ATMWCR_WIN_LUNIT_ORDERING_OFFS		6
+#define ATMWCR_WIN_LUNIT_ORDERING_MASK		BIT6
+#define ATMWCR_WIN_LUNIT_ORDERING			(1 << ATMWCR_WIN_LUNIT_FORCE64_OFFS)
+
+/* PEX Attributes */
+#define ATMWCR_WIN_PEX_TYPE_OFFS			3
+#define ATMWCR_WIN_PEX_TYPE_MASK			BIT3
+#define ATMWCR_WIN_PEX_TYPE_IO				(0 << ATMWCR_WIN_PEX_TYPE_OFFS)
+#define ATMWCR_WIN_PEX_TYPE_MEM				(1 << ATMWCR_WIN_PEX_TYPE_OFFS)
+
+/* typedefs */
+
+/* Unsupported attributes for address decode:                               */
+/* 2) PCI0/1_REQ64n control                                                 */
+
+typedef struct _mvDecRegs
+{
+	MV_U32 baseReg;
+    MV_U32 baseRegHigh;
+    MV_U32 sizeReg;
+
+}MV_DEC_REGS;
+
+typedef struct _mvTargetAttrib
+{
+	MV_U8			attrib;			/* chip select attributes */
+	MV_TARGET_ID 		targetId; 		/* Target Id of this MV_TARGET */
+
+}MV_TARGET_ATTRIB;
+
+
+/* This structure describes address decode window                           */
+typedef struct _mvDecWin 
+{
+    MV_TARGET       target;         /* Target for addr decode window        */
+    MV_ADDR_WIN     addrWin;        /* Address window of target             */
+    MV_BOOL     	enable;         /* Window enable/disable                */
+}MV_DEC_WIN;
+
+typedef struct _mvDecWinParams
+{
+    MV_TARGET_ID    targetId;   /* Target ID field */
+    MV_U8           attrib;     /* Attribute field */
+    MV_U32          baseAddr;   /* Base address in register format */
+    MV_U32          size;       /* Size in register format */
+}MV_DEC_WIN_PARAMS;
+
+
+/* mvCtrlEnvAddrDec API list */
+
+MV_STATUS mvCtrlAddrDecToReg(MV_ADDR_WIN *pAddrDecWin,
+							 MV_DEC_REGS *pAddrDecRegs);
+
+MV_STATUS mvCtrlRegToAddrDec(MV_DEC_REGS *pAddrDecRegs,
+							 MV_ADDR_WIN *pAddrDecWin);
+
+MV_STATUS mvCtrlAttribGet(MV_TARGET target,
+						  MV_TARGET_ATTRIB *targetAttrib);
+
+MV_TARGET mvCtrlTargetGet(MV_TARGET_ATTRIB *targetAttrib);
+
+
+MV_STATUS mvCtrlAddrDecToParams(MV_DEC_WIN *pAddrDecWin, 
+                                MV_DEC_WIN_PARAMS *pWinParam);
+
+MV_STATUS mvCtrlParamsToAddrDec(MV_DEC_WIN_PARAMS *pWinParam, 
+                                MV_DEC_WIN *pAddrDecWin);
+
+
+
+
+#endif /* __INCmvCtrlEnvAddrDech */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvAsm.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvAsm.h
new file mode 100644
index 0000000000..6f6367a2fb
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvAsm.h
@@ -0,0 +1,98 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvCtrlEnvAsmh
+#define __INCmvCtrlEnvAsmh
+#include "pex/mvPexRegs.h"
+
+#define CHIP_BOND_REG					0x10034
+#define PCKG_OPT_MASK_AS 		#3
+#define PXCCARI_REVID_MASK_AS           #PXCCARI_REVID_MASK
+
+/* Read device ID into toReg bits 15:0 from 0xd0000000 */
+/* defines  */
+#define MV_DV_CTRL_MODEL_GET_ASM(toReg, tmpReg) \
+        MV_DV_REG_READ_ASM(toReg, tmpReg, CHIP_BOND_REG);\
+        and     toReg, toReg, PCKG_OPT_MASK_AS                 /* Mask for package ID */
+
+/* Read device ID into toReg bits 15:0 from 0xf1000000*/
+#define MV_CTRL_MODEL_GET_ASM(toReg, tmpReg) \
+        MV_REG_READ_ASM(toReg, tmpReg, CHIP_BOND_REG);\
+        and     toReg, toReg, PCKG_OPT_MASK_AS                  /* Mask for package ID */
+
+/* Read Revision into toReg bits 7:0 0xd0000000*/
+#define MV_DV_CTRL_REV_GET_ASM(toReg, tmpReg)	\
+        /* Read device revision */			\
+        MV_DV_REG_READ_ASM(toReg, tmpReg, PEX_CFG_DIRECT_ACCESS(0,PEX_CLASS_CODE_AND_REVISION_ID));\
+        and     toReg, toReg, PXCCARI_REVID_MASK_AS                  /* Mask for calss ID */
+
+/* Read Revision into toReg bits 7:0 0xf1000000*/
+#define MV_CTRL_REV_GET_ASM(toReg, tmpReg)	\
+        /* Read device revision */			\
+        MV_REG_READ_ASM(toReg, tmpReg, PEX_CFG_DIRECT_ACCESS(0,PEX_CLASS_CODE_AND_REVISION_ID));\
+        and     toReg, toReg, PXCCARI_REVID_MASK_AS                  /* Mask for calss ID */
+
+
+#endif /* __INCmvCtrlEnvAsmh */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvLib.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvLib.c
new file mode 100644
index 0000000000..adf451d3e0
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvLib.c
@@ -0,0 +1,1825 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+/* includes */
+#include "mvCommon.h"
+#include "mvCtrlEnvLib.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+
+#if defined(MV_INCLUDE_PEX)
+#include "pex/mvPex.h"
+#include "ctrlEnv/sys/mvSysPex.h"
+#endif
+
+#if defined(MV_INCLUDE_GIG_ETH)
+#include "ctrlEnv/sys/mvSysGbe.h"
+#endif
+
+#if defined(MV_INCLUDE_XOR)
+#include "ctrlEnv/sys/mvSysXor.h"
+#endif
+
+#if defined(MV_INCLUDE_SATA)
+#include "ctrlEnv/sys/mvSysSata.h"
+#endif
+
+#if defined(MV_INCLUDE_USB)
+#include "ctrlEnv/sys/mvSysUsb.h"
+#endif
+
+#if defined(MV_INCLUDE_AUDIO)
+#include "ctrlEnv/sys/mvSysAudio.h"
+#endif
+
+#if defined(MV_INCLUDE_CESA)
+#include "ctrlEnv/sys/mvSysCesa.h"
+#endif
+
+#if defined(MV_INCLUDE_TS)
+#include "ctrlEnv/sys/mvSysTs.h"
+#endif
+
+/* defines  */
+#ifdef MV_DEBUG
+	#define DB(x)	x
+#else
+	#define DB(x)
+#endif	
+
+/*******************************************************************************
+* mvCtrlEnvInit - Initialize Marvell controller environment.
+*
+* DESCRIPTION:
+*       This function get environment information and initialize controller
+*       internal/external environment. For example
+*       1) MPP settings according to board MPP macros.
+*		NOTE: It is the user responsibility to shut down all DMA channels
+*		in device and disable controller sub units interrupts during 
+*		boot process.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+MV_STATUS mvCtrlEnvInit(MV_VOID)
+{
+    	MV_U32 mppGroup;
+	MV_U32 devId;
+	MV_U32 boardId;
+	MV_U32 i;
+	MV_U32 maxMppGrp = 1;
+	MV_U32 mppVal = 0;
+	MV_U32 bootVal = 0;
+	MV_U32 mppGroupType = 0;
+	MV_U32 mppGroup1[][3] = MPP_GROUP_1_TYPE;
+	MV_U32 mppGroup2[][3] = MPP_GROUP_2_TYPE;
+
+	devId = mvCtrlModelGet();
+	boardId= mvBoardIdGet();
+
+	switch(devId){
+		case MV_6281_DEV_ID:
+			maxMppGrp = MV_6281_MPP_MAX_GROUP;
+			break;
+		case MV_6192_DEV_ID:
+			maxMppGrp = MV_6192_MPP_MAX_GROUP;
+			break;
+        case MV_6190_DEV_ID:
+            maxMppGrp = MV_6190_MPP_MAX_GROUP;
+            break;
+		case MV_6180_DEV_ID:
+			maxMppGrp = MV_6180_MPP_MAX_GROUP;
+			break;		
+	}
+	
+	/* MPP Init */
+	/* We split mpp init to 3 phases:
+	 * 1. We init mpp[19:0] from the board info. mpp[23:20] will be over write 
+	 * in phase 2.
+	 * 2. We detect the mpp group type and according the mpp values [35:20].
+	 * 3. We detect the mpp group type and according the mpp values [49:36].
+	 */
+	/* Mpp phase 1 mpp[19:0] */
+	/* Read MPP group from board level and assign to MPP register */
+	for (mppGroup = 0; mppGroup < 3; mppGroup++)
+	{
+		mppVal = mvBoardMppGet(mppGroup);
+		if (mppGroup == 0)
+		{
+		    bootVal = MV_REG_READ(mvCtrlMppRegGet(mppGroup));
+		    if (mvCtrlIsBootFromSPI())
+		    {
+			mppVal &= ~0xffff;
+			bootVal &= 0xffff;
+			mppVal |= bootVal;
+		    }
+		    else if (mvCtrlIsBootFromSPIUseNAND())
+		    {
+			mppVal &= ~0xf0000000;
+			bootVal &= 0xf0000000;
+			mppVal |= bootVal;
+		    }
+		    else if (mvCtrlIsBootFromNAND())
+		    {
+			mppVal &= ~0xffffff;
+			bootVal &= 0xffffff;
+			mppVal |= bootVal;
+		    }
+		}
+		
+		if (mppGroup == 2)
+		{
+		    bootVal = MV_REG_READ(mvCtrlMppRegGet(mppGroup));
+		    if (mvCtrlIsBootFromNAND())
+		    {
+			mppVal &= ~0xff00;
+			bootVal &= 0xff00;
+			mppVal |= bootVal;
+		    }
+		}
+
+		MV_REG_WRITE(mvCtrlMppRegGet(mppGroup), mppVal);
+	}
+
+	/* Identify MPPs group */
+	mvBoardMppGroupIdUpdate();
+
+	/* Update MPPs mux relevent only on Marvell DB */
+	if ((boardId == DB_88F6281A_BP_ID) ||
+		(boardId == DB_88F6180A_BP_ID))
+		mvBoardMppMuxSet();
+
+	mppGroupType = mvBoardMppGroupTypeGet(MV_BOARD_MPP_GROUP_1);
+
+	/* Mpp phase 2 */
+	/* Read MPP group from board level and assign to MPP register */
+    if (devId != MV_6180_DEV_ID)
+    {
+        i = 0;
+    	for (mppGroup = 2; mppGroup < 5; mppGroup++)
+    	{
+    		if ((mppGroupType == MV_BOARD_OTHER) ||
+    			(boardId == RD_88F6281A_ID) ||
+    			(boardId == RD_88F6192A_ID) ||
+                (boardId == RD_88F6190A_ID) ||
+                (boardId == RD_88F6281A_PCAC_ID) ||
+                (boardId == SHEEVA_PLUG_ID))
+    			mppVal = mvBoardMppGet(mppGroup);
+    		else
+    		{
+    			mppVal = mppGroup1[mppGroupType][i];
+    			i++;
+    		}
+    
+    		/* Group 2 is shared mpp[23:16] */
+    		if (mppGroup == 2)
+    		{
+                bootVal = MV_REG_READ(mvCtrlMppRegGet(mppGroup));
+    			mppVal &= ~0xffff;
+    			bootVal &= 0xffff;
+    			mppVal |= bootVal;
+    		}
+    
+    		MV_REG_WRITE(mvCtrlMppRegGet(mppGroup), mppVal);
+    	}
+    }
+
+	if ((devId == MV_6192_DEV_ID) || (devId == MV_6190_DEV_ID))
+		return MV_OK;
+ 	
+	/* Mpp phase 3 */
+	mppGroupType = mvBoardMppGroupTypeGet(MV_BOARD_MPP_GROUP_2);
+	/* Read MPP group from board level and assign to MPP register */
+	i = 0;
+	for (mppGroup = 4; mppGroup < 7; mppGroup++)
+	{
+		if ((mppGroupType == MV_BOARD_OTHER) ||
+			(boardId == RD_88F6281A_ID) ||
+            (boardId == RD_88F6281A_PCAC_ID) ||
+            (boardId == SHEEVA_PLUG_ID))
+			mppVal = mvBoardMppGet(mppGroup);
+		else
+		{
+			mppVal = mppGroup2[mppGroupType][i];
+			i++;
+		}
+
+		/* Group 4 is shared mpp[35:32] */
+		if (mppGroup == 4)
+		{
+            bootVal = MV_REG_READ(mvCtrlMppRegGet(mppGroup));
+			mppVal &= ~0xffff;
+			bootVal &= 0xffff;
+			mppVal |= bootVal;
+		}
+
+		MV_REG_WRITE(mvCtrlMppRegGet(mppGroup), mppVal);
+	}
+    /* Update SSCG configuration register*/
+    if(mvBoardIdGet() == DB_88F6281A_BP_ID || mvBoardIdGet() == DB_88F6192A_BP_ID ||
+       mvBoardIdGet() == DB_88F6190A_BP_ID || mvBoardIdGet() == DB_88F6180A_BP_ID)
+        MV_REG_WRITE(0x100d8, 0x53);
+
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvCtrlMppRegGet - return reg address of mpp group
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       mppGroup - MPP group.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_U32 - Register address.
+*
+*******************************************************************************/
+MV_U32 mvCtrlMppRegGet(MV_U32 mppGroup)
+{
+        MV_U32 ret;
+
+        switch(mppGroup){
+                case (0):       ret = MPP_CONTROL_REG0;
+                                break;
+                case (1):       ret = MPP_CONTROL_REG1;
+                                break;
+                case (2):       ret = MPP_CONTROL_REG2;
+                                break;
+                case (3):       ret = MPP_CONTROL_REG3;
+                                break;
+                case (4):       ret = MPP_CONTROL_REG4;
+                                break;
+                case (5):       ret = MPP_CONTROL_REG5;
+                                break;
+                case (6):       ret = MPP_CONTROL_REG6;
+                                break;
+                default:        ret = MPP_CONTROL_REG0;
+                                break;
+        }
+        return ret;
+}
+#if defined(MV_INCLUDE_PEX) 
+/*******************************************************************************
+* mvCtrlPexMaxIfGet - Get Marvell controller number of PEX interfaces.
+*
+* DESCRIPTION:
+*       This function returns Marvell controller number of PEX interfaces.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       Marvell controller number of PEX interfaces. If controller 
+*		ID is undefined the function returns '0'.
+*
+*******************************************************************************/
+MV_U32 mvCtrlPexMaxIfGet(MV_VOID)
+{
+
+	return MV_PEX_MAX_IF;
+}
+#endif
+
+#if defined(MV_INCLUDE_GIG_ETH)
+/*******************************************************************************
+* mvCtrlEthMaxPortGet - Get Marvell controller number of etherent ports.
+*
+* DESCRIPTION:
+*       This function returns Marvell controller number of etherent port.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       Marvell controller number of etherent port.
+*
+*******************************************************************************/
+MV_U32 mvCtrlEthMaxPortGet(MV_VOID)
+{
+	MV_U32 devId;
+	
+	devId = mvCtrlModelGet();
+
+	switch(devId){
+		case MV_6281_DEV_ID:
+			return MV_6281_ETH_MAX_PORTS;
+			break;
+		case MV_6192_DEV_ID:
+			return MV_6192_ETH_MAX_PORTS;
+			break;
+        case MV_6190_DEV_ID:
+            return MV_6190_ETH_MAX_PORTS;
+            break;
+		case MV_6180_DEV_ID:
+			return MV_6180_ETH_MAX_PORTS;
+			break;		
+	}
+	return 0;
+
+}
+#endif
+
+#if defined(MV_INCLUDE_XOR)
+/*******************************************************************************
+* mvCtrlXorMaxChanGet - Get Marvell controller number of XOR channels.
+*
+* DESCRIPTION:
+*       This function returns Marvell controller number of XOR channels.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       Marvell controller number of XOR channels.
+*
+*******************************************************************************/
+MV_U32 mvCtrlXorMaxChanGet(MV_VOID)
+{
+	return MV_XOR_MAX_CHAN; 
+}
+#endif
+
+#if defined(MV_INCLUDE_USB)
+/*******************************************************************************
+* mvCtrlUsbHostMaxGet - Get number of Marvell Usb  controllers
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       returns number of Marvell USB  controllers.
+*
+*******************************************************************************/
+MV_U32 mvCtrlUsbMaxGet(void)
+{
+	return MV_USB_MAX_PORTS;
+}
+#endif
+
+
+#if defined(MV_INCLUDE_NAND)
+/*******************************************************************************
+* mvCtrlNandSupport - Return if this controller has integrated NAND flash support
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_TRUE if NAND is supported and MV_FALSE otherwise
+*
+*******************************************************************************/
+MV_U32	  mvCtrlNandSupport(MV_VOID)
+{
+	MV_U32 devId;
+	
+	devId = mvCtrlModelGet();
+
+	switch(devId){
+		case MV_6281_DEV_ID:
+			return MV_6281_NAND;
+			break;
+		case MV_6192_DEV_ID:
+			return MV_6192_NAND;
+			break;
+        case MV_6190_DEV_ID:
+            return MV_6190_NAND;
+            break;
+		case MV_6180_DEV_ID:
+			return MV_6180_NAND;
+			break;		
+	}
+	return 0;
+
+}
+#endif
+
+#if defined(MV_INCLUDE_SDIO)
+/*******************************************************************************
+* mvCtrlSdioSupport - Return if this controller has integrated SDIO flash support
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_TRUE if SDIO is supported and MV_FALSE otherwise
+*
+*******************************************************************************/
+MV_U32	  mvCtrlSdioSupport(MV_VOID)
+{
+	MV_U32 devId;
+	
+	devId = mvCtrlModelGet();
+
+	switch(devId){
+		case MV_6281_DEV_ID:
+			return MV_6281_SDIO;
+			break;
+		case MV_6192_DEV_ID:
+			return MV_6192_SDIO;
+			break;
+        case MV_6190_DEV_ID:
+            return MV_6190_SDIO;
+            break;
+		case MV_6180_DEV_ID:
+			return MV_6180_SDIO;
+			break;		
+	}
+	return 0;
+
+}
+#endif
+
+#if defined(MV_INCLUDE_TS)
+/*******************************************************************************
+* mvCtrlTsSupport - Return if this controller has integrated TS flash support
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_TRUE if TS is supported and MV_FALSE otherwise
+*
+*******************************************************************************/
+MV_U32	  mvCtrlTsSupport(MV_VOID)
+{
+	MV_U32 devId;
+	
+	devId = mvCtrlModelGet();
+
+	switch(devId){
+		case MV_6281_DEV_ID:
+			return MV_6281_TS;
+			break;
+		case MV_6192_DEV_ID:
+			return MV_6192_TS;
+			break;
+        case MV_6190_DEV_ID:
+            return MV_6190_TS;
+            break;
+		case MV_6180_DEV_ID:
+			return MV_6180_TS;
+			break;		
+	}
+	return 0;
+}
+#endif
+
+#if defined(MV_INCLUDE_AUDIO)
+/*******************************************************************************
+* mvCtrlAudioSupport - Return if this controller has integrated AUDIO flash support
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_TRUE if AUDIO is supported and MV_FALSE otherwise
+*
+*******************************************************************************/
+MV_U32	  mvCtrlAudioSupport(MV_VOID)
+{
+	MV_U32 devId;
+	
+	devId = mvCtrlModelGet();
+
+	switch(devId){
+		case MV_6281_DEV_ID:
+			return MV_6281_AUDIO;
+			break;
+		case MV_6192_DEV_ID:
+			return MV_6192_AUDIO;
+			break;
+        case MV_6190_DEV_ID:
+            return MV_6190_AUDIO;
+            break;
+		case MV_6180_DEV_ID:
+			return MV_6180_AUDIO;
+			break;		
+	}
+	return 0;
+
+}
+#endif
+
+#if defined(MV_INCLUDE_TDM)
+/*******************************************************************************
+* mvCtrlTdmSupport - Return if this controller has integrated TDM flash support
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_TRUE if TDM is supported and MV_FALSE otherwise
+*
+*******************************************************************************/
+MV_U32	  mvCtrlTdmSupport(MV_VOID)
+{
+	MV_U32 devId;
+	
+	devId = mvCtrlModelGet();
+
+	switch(devId){
+		case MV_6281_DEV_ID:
+			return MV_6281_TDM;
+			break;
+		case MV_6192_DEV_ID:
+			return MV_6192_TDM;
+			break;
+        case MV_6190_DEV_ID:
+            return MV_6190_TDM;
+            break;
+		case MV_6180_DEV_ID:
+			return MV_6180_TDM;
+			break;		
+	}
+	return 0;
+
+}
+#endif
+
+/*******************************************************************************
+* mvCtrlModelGet - Get Marvell controller device model (Id)
+*
+* DESCRIPTION:
+*       This function returns 16bit describing the device model (ID) as defined
+*       in PCI Device and Vendor ID configuration register offset 0x0.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       16bit desscribing Marvell controller ID 
+*
+*******************************************************************************/
+MV_U16 mvCtrlModelGet(MV_VOID)
+{
+	MV_U32 devId;
+	
+	devId = MV_REG_READ(CHIP_BOND_REG);
+	devId &= PCKG_OPT_MASK;
+
+	switch(devId){
+		case 2:
+			return	MV_6281_DEV_ID;
+			break;
+    case 1:
+            if (((MV_REG_READ(PEX_CFG_DIRECT_ACCESS(0,PEX_DEVICE_AND_VENDOR_ID))& 0xffff0000) >> 16)
+                 == MV_6190_DEV_ID)
+                return	MV_6190_DEV_ID;
+            else
+                return	MV_6192_DEV_ID;
+			break;
+		case 0:
+			return	MV_6180_DEV_ID;
+			break;
+	}
+
+	return 0;
+}
+/*******************************************************************************
+* mvCtrlRevGet - Get Marvell controller device revision number
+*
+* DESCRIPTION:
+*       This function returns 8bit describing the device revision as defined
+*       in PCI Express Class Code and Revision ID Register.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       8bit desscribing Marvell controller revision number 
+*
+*******************************************************************************/
+MV_U8 mvCtrlRevGet(MV_VOID)
+{
+	MV_U8 revNum;
+#if defined(MV_INCLUDE_CLK_PWR_CNTRL)
+	/* Check pex power state */
+	MV_U32 pexPower;
+	pexPower = mvCtrlPwrClckGet(PEX_UNIT_ID,0);
+	if (pexPower == MV_FALSE)
+		mvCtrlPwrClckSet(PEX_UNIT_ID, 0, MV_TRUE);
+#endif
+	revNum = (MV_U8)MV_REG_READ(PEX_CFG_DIRECT_ACCESS(0,PCI_CLASS_CODE_AND_REVISION_ID));
+#if defined(MV_INCLUDE_CLK_PWR_CNTRL)
+	/* Return to power off state */
+	if (pexPower == MV_FALSE)
+		mvCtrlPwrClckSet(PEX_UNIT_ID, 0, MV_FALSE);
+#endif
+	return ((revNum & PCCRIR_REVID_MASK) >> PCCRIR_REVID_OFFS);
+}
+
+/*******************************************************************************
+* mvCtrlNameGet - Get Marvell controller name
+*
+* DESCRIPTION:
+*       This function returns a string describing the device model and revision.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       pNameBuff - Buffer to contain device name string. Minimum size 30 chars.
+*
+* RETURN:
+*       
+*       MV_ERROR if informantion can not be read.
+*******************************************************************************/
+MV_STATUS mvCtrlNameGet(char *pNameBuff)
+{
+	mvOsSPrintf (pNameBuff, "%s%x Rev %d", SOC_NAME_PREFIX, 
+				mvCtrlModelGet(), mvCtrlRevGet()); 
+	
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvCtrlModelRevGet - Get Controller Model (Device ID) and Revision
+*
+* DESCRIPTION:
+*       This function returns 32bit value describing both Device ID and Revision
+*       as defined in PCI Express Device and Vendor ID Register and device revision
+*	    as defined in PCI Express Class Code and Revision ID Register.
+     
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       32bit describing both controller device ID and revision number
+*
+*******************************************************************************/
+MV_U32	mvCtrlModelRevGet(MV_VOID)
+{
+	return ((mvCtrlModelGet() << 16) | mvCtrlRevGet());
+}
+
+/*******************************************************************************
+* mvCtrlModelRevNameGet - Get Marvell controller name
+*
+* DESCRIPTION:
+*       This function returns a string describing the device model and revision.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       pNameBuff - Buffer to contain device name string. Minimum size 30 chars.
+*
+* RETURN:
+*       
+*       MV_ERROR if informantion can not be read.
+*******************************************************************************/
+
+MV_STATUS mvCtrlModelRevNameGet(char *pNameBuff)
+{
+
+        switch (mvCtrlModelRevGet())
+        {
+        case MV_6281_A0_ID:
+                mvOsSPrintf (pNameBuff, "%s",MV_6281_A0_NAME); 
+                break;
+        case MV_6192_A0_ID:
+                mvOsSPrintf (pNameBuff, "%s",MV_6192_A0_NAME); 
+                break;
+        case MV_6180_A0_ID:
+                mvOsSPrintf (pNameBuff, "%s",MV_6180_A0_NAME); 
+                break;
+        case MV_6190_A0_ID:
+                mvOsSPrintf (pNameBuff, "%s",MV_6190_A0_NAME); 
+                break;
+        case MV_6281_A1_ID:
+                mvOsSPrintf (pNameBuff, "%s",MV_6281_A1_NAME);
+                break;
+        case MV_6192_A1_ID:
+                mvOsSPrintf (pNameBuff, "%s",MV_6192_A1_NAME);
+                break;
+        case MV_6180_A1_ID:
+                mvOsSPrintf (pNameBuff, "%s",MV_6180_A1_NAME);
+                break;
+        case MV_6190_A1_ID:
+                mvOsSPrintf (pNameBuff, "%s",MV_6190_A1_NAME);
+                break;
+        default:
+                mvCtrlNameGet(pNameBuff);
+                break;
+        }
+
+        return MV_OK;
+}
+
+
+/*******************************************************************************
+* ctrlWinOverlapTest - Test address windows for overlaping.
+*
+* DESCRIPTION:
+*       This function checks the given two address windows for overlaping.
+*
+* INPUT:
+*       pAddrWin1 - Address window 1.
+*       pAddrWin2 - Address window 2.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       
+*       MV_TRUE if address window overlaps, MV_FALSE otherwise.
+*******************************************************************************/
+MV_STATUS ctrlWinOverlapTest(MV_ADDR_WIN *pAddrWin1, MV_ADDR_WIN *pAddrWin2)
+{
+    MV_U32 winBase1, winBase2;
+    MV_U32 winTop1, winTop2;
+    
+	/* check if we have overflow than 4G*/
+	if (((0xffffffff - pAddrWin1->baseLow) < pAddrWin1->size-1)||
+	   ((0xffffffff - pAddrWin2->baseLow) < pAddrWin2->size-1))
+	{
+		return MV_TRUE;
+	}
+
+    winBase1 = pAddrWin1->baseLow;
+    winBase2 = pAddrWin2->baseLow;
+    winTop1  = winBase1 + pAddrWin1->size-1;
+    winTop2  = winBase2 + pAddrWin2->size-1;
+
+    
+    if (((winBase1 <= winTop2 ) && ( winTop2 <= winTop1)) ||
+        ((winBase1 <= winBase2) && (winBase2 <= winTop1)))
+    {
+        return MV_TRUE;
+    }
+    else
+    {
+        return MV_FALSE;
+    }
+}
+
+/*******************************************************************************
+* ctrlWinWithinWinTest - Test address windows for overlaping.
+*
+* DESCRIPTION:
+*       This function checks the given win1 boundries is within
+*		win2 boundries.
+*
+* INPUT:
+*       pAddrWin1 - Address window 1.
+*       pAddrWin2 - Address window 2.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       
+*       MV_TRUE if found win1 inside win2, MV_FALSE otherwise.
+*******************************************************************************/
+MV_STATUS ctrlWinWithinWinTest(MV_ADDR_WIN *pAddrWin1, MV_ADDR_WIN *pAddrWin2)
+{
+    MV_U32 winBase1, winBase2;
+    MV_U32 winTop1, winTop2;
+    
+    winBase1 = pAddrWin1->baseLow;
+    winBase2 = pAddrWin2->baseLow;
+    winTop1  = winBase1 + pAddrWin1->size -1;
+    winTop2  = winBase2 + pAddrWin2->size -1;
+    
+    if (((winBase1 >= winBase2 ) && ( winBase1 <= winTop2)) ||
+        ((winTop1  >= winBase2) && (winTop1 <= winTop2)))
+    {
+        return MV_TRUE;
+    }
+    else
+    {
+        return MV_FALSE;
+    }
+}
+
+static const char* cntrlName[] = TARGETS_NAME_ARRAY;
+
+/*******************************************************************************
+* mvCtrlTargetNameGet - Get Marvell controller target name
+*
+* DESCRIPTION:
+*       This function convert the trget enumeration to string.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       Target name (const MV_8 *)
+*******************************************************************************/
+const MV_8* mvCtrlTargetNameGet( MV_TARGET target )
+{
+
+	if (target >= MAX_TARGETS)
+	{
+		return "target unknown";
+	}
+
+	return cntrlName[target];
+}
+
+/*******************************************************************************
+* mvCtrlAddrDecShow - Print the Controller units address decode map.
+*
+* DESCRIPTION:
+*		This function the Controller units address decode map.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+MV_VOID mvCtrlAddrDecShow(MV_VOID)
+{
+    mvCpuIfAddDecShow();
+    mvAhbToMbusAddDecShow();
+#if defined(MV_INCLUDE_PEX)
+	mvPexAddrDecShow();
+#endif
+#if defined(MV_INCLUDE_USB)
+    	mvUsbAddrDecShow();
+#endif
+#if defined(MV_INCLUDE_GIG_ETH)
+	mvEthAddrDecShow();
+#endif
+#if defined(MV_INCLUDE_XOR)
+	mvXorAddrDecShow();
+#endif
+#if defined(MV_INCLUDE_SATA)
+    mvSataAddrDecShow();
+#endif
+#if defined(MV_INCLUDE_AUDIO)
+    mvAudioAddrDecShow();
+#endif
+#if defined(MV_INCLUDE_TS)
+    mvTsuAddrDecShow();
+#endif
+}
+
+/*******************************************************************************
+* ctrlSizeToReg - Extract size value for register assignment.
+*
+* DESCRIPTION:		
+*       Address decode size parameter must be programed from LSB to MSB as
+*       sequence of 1's followed by sequence of 0's. The number of 1's 
+*       specifies the size of the window in 64 KB granularity (e.g. a 
+*       value of 0x00ff specifies 256x64k = 16 MB).
+*       This function extract the size value from the size parameter according 
+*		to given aligment paramter. For example for size 0x1000000 (16MB) and 
+*		aligment 0x10000 (64KB) the function will return 0x00FF.
+*
+* INPUT:
+*       size - Size.
+*		alignment - Size alignment.	Note that alignment must be power of 2!
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       32bit describing size register value correspond to size parameter. 
+*		If value is '-1' size parameter or aligment are invalid.
+*******************************************************************************/
+MV_U32	ctrlSizeToReg(MV_U32 size, MV_U32 alignment)
+{
+	MV_U32 retVal;
+
+	/* Check size parameter alignment		*/
+	if ((0 == size) || (MV_IS_NOT_ALIGN(size, alignment)))
+	{
+		DB(mvOsPrintf("ctrlSizeToReg: ERR. Size is zero or not aligned.\n"));
+		return -1;
+	}
+	
+	/* Take out the "alignment" portion out of the size parameter */
+	alignment--;	/* Now the alignmet is a sequance of '1' (e.g. 0xffff) 		*/
+					/* and size is 0x1000000 (16MB) for example	*/
+	while(alignment & 1)	/* Check that alignmet LSB is set	*/
+	{
+		size = (size >> 1); /* If LSB is set, move 'size' one bit to right	*/	
+		alignment = (alignment >> 1);
+	}
+	
+	/* If after the alignment first '0' was met we still have '1' in 		*/
+	/* it then aligment is invalid (not power of 2) 				*/
+	if (alignment)
+	{
+		DB(mvOsPrintf("ctrlSizeToReg: ERR. Alignment parameter 0x%x invalid.\n", 
+			(MV_U32)alignment));
+		return -1;
+	}
+
+	/* Now the size is shifted right according to aligment: 0x0100			*/
+	size--;         /* Now the size is a sequance of '1': 0x00ff 			*/
+    
+	retVal = size ;
+	
+	/* Check that LSB to MSB is sequence of 1's followed by sequence of 0's		*/
+	while(size & 1)	/* Check that LSB is set	*/
+	{
+		size = (size >> 1); /* If LSB is set, move one bit to the right		*/	
+	}
+
+    if (size) /* Sequance of 1's is over. Check that we have no other 1's		*/
+	{
+		DB(mvOsPrintf("ctrlSizeToReg: ERR. Size parameter 0x%x invalid.\n", 
+                                                                        size));
+		return -1;
+	}
+	
+    return retVal;
+	
+}
+
+/*******************************************************************************
+* ctrlRegToSize - Extract size value from register value.
+*
+* DESCRIPTION:		
+*       This function extract a size value from the register size parameter 
+*		according to given aligment paramter. For example for register size 
+*		value 0xff and aligment 0x10000 the function will return 0x01000000.
+*
+* INPUT:
+*       regSize   - Size as in register format.	See ctrlSizeToReg.
+*		alignment - Size alignment.	Note that alignment must be power of 2!
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       32bit describing size. 
+*		If value is '-1' size parameter or aligment are invalid.
+*******************************************************************************/
+MV_U32	ctrlRegToSize(MV_U32 regSize, MV_U32 alignment)
+{
+   	MV_U32 temp;
+
+	/* Check that LSB to MSB is sequence of 1's followed by sequence of 0's		*/ 
+	temp = regSize;		/* Now the size is a sequance of '1': 0x00ff		*/
+	
+	while(temp & 1)	/* Check that LSB is set					*/
+	{
+		temp = (temp >> 1); /* If LSB is set, move one bit to the right		*/	
+	}
+
+    if (temp) /* Sequance of 1's is over. Check that we have no other 1's		*/
+	{
+		DB(mvOsPrintf("ctrlRegToSize: ERR. Size parameter 0x%x invalid.\n", 
+					regSize));
+	   	return -1;
+	}
+	
+
+	/* Check that aligment is a power of two					*/
+	temp = alignment - 1;/* Now the alignmet is a sequance of '1' (0xffff) 		*/
+					
+	while(temp & 1)	/* Check that alignmet LSB is set				*/
+	{
+		temp = (temp >> 1); /* If LSB is set, move 'size' one bit to right	*/	
+	}
+	
+	/* If after the 'temp' first '0' was met we still have '1' in 'temp'		*/
+	/* then 'temp' is invalid (not power of 2) 					*/
+	if (temp)
+	{
+		DB(mvOsPrintf("ctrlSizeToReg: ERR. Alignment parameter 0x%x invalid.\n", 
+					alignment));
+		return -1;
+	}
+
+	regSize++;      /* Now the size is 0x0100					*/
+
+	/* Add in the "alignment" portion to the register size parameter 		*/
+	alignment--;	/* Now the alignmet is a sequance of '1' (e.g. 0xffff) 		*/
+
+	while(alignment & 1)	/* Check that alignmet LSB is set			*/
+	{
+		regSize   = (regSize << 1); /* LSB is set, move 'size' one bit left	*/	
+		alignment = (alignment >> 1);
+	}
+		
+    return regSize;	
+}
+
+
+/*******************************************************************************
+* ctrlSizeRegRoundUp - Round up given size 
+*
+* DESCRIPTION:		
+*       This function round up a given size to a size that fits the 
+*       restrictions of size format given an aligment parameter.
+*		to given aligment paramter. For example for size parameter 0xa1000 and 
+*		aligment 0x1000 the function will return 0xFF000.
+*
+* INPUT:
+*       size - Size.
+*		alignment - Size alignment.	Note that alignment must be power of 2!
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       32bit describing size value correspond to size in register.  
+*******************************************************************************/
+MV_U32	ctrlSizeRegRoundUp(MV_U32 size, MV_U32 alignment)
+{
+	MV_U32 msbBit = 0;
+    MV_U32 retSize;
+	
+    /* Check if size parameter is already comply with restriction		*/
+	if (!(-1 == ctrlSizeToReg(size, alignment)))
+	{
+		return size;
+	}
+    
+    while(size)
+	{
+		size = (size >> 1);
+        msbBit++;
+	}
+
+    retSize = (1 << msbBit);
+    
+    if (retSize < alignment)
+    {
+        return alignment;
+    }
+    else
+    {
+        return retSize;
+    }
+}
+/*******************************************************************************
+* mvCtrlSysRstLengthCounterGet - Return number of milliseconds the reset button 
+* 				 was pressed and clear counter
+*
+* DESCRIPTION:		
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN: number of milliseconds the reset button was pressed 
+*******************************************************************************/
+MV_U32	mvCtrlSysRstLengthCounterGet(MV_VOID)
+{
+	static volatile MV_U32 Count = 0;
+
+	if(!Count) {
+		Count = (MV_REG_READ(SYSRST_LENGTH_COUNTER_REG) & SLCR_COUNT_MASK);
+		Count = (Count / (MV_BOARD_REFCLK_25MHZ / 1000));
+		/* clear counter for next boot */
+		MV_REG_BIT_SET(SYSRST_LENGTH_COUNTER_REG, SLCR_CLR_MASK);	
+	}
+
+	DB(mvOsPrintf("mvCtrlSysRstLengthCounterGet: Reset button was pressed for %u milliseconds\n", Count));
+
+	return Count;		
+}
+
+MV_BOOL	  mvCtrlIsBootFromSPI(MV_VOID)
+{
+    MV_U32 satr = 0;
+    satr = MV_REG_READ(MPP_SAMPLE_AT_RESET);
+    if(mvCtrlModelGet() == MV_6180_DEV_ID)
+    {
+        if (MSAR_BOOT_MODE_6180(satr) == MSAR_BOOT_SPI_WITH_BOOTROM_6180)
+            return MV_TRUE;
+        else
+            return MV_FALSE;
+    }
+    satr = satr & MSAR_BOOT_MODE_MASK;    
+    if (satr == MSAR_BOOT_SPI_WITH_BOOTROM)
+        return MV_TRUE;
+    else
+        return MV_FALSE;
+}
+
+MV_BOOL	  mvCtrlIsBootFromSPIUseNAND(MV_VOID)
+{
+    MV_U32 satr = 0;
+    if(mvCtrlModelGet() == MV_6180_DEV_ID)
+        return MV_FALSE;
+    satr = MV_REG_READ(MPP_SAMPLE_AT_RESET);
+    satr = satr & MSAR_BOOT_MODE_MASK;
+    
+    if (satr == MSAR_BOOT_SPI_USE_NAND_WITH_BOOTROM)
+        return MV_TRUE;
+    else
+        return MV_FALSE;
+}
+
+MV_BOOL	  mvCtrlIsBootFromNAND(MV_VOID)
+{
+    MV_U32 satr = 0;
+    satr = MV_REG_READ(MPP_SAMPLE_AT_RESET);
+    if(mvCtrlModelGet() == MV_6180_DEV_ID)
+    {
+        if (MSAR_BOOT_MODE_6180(satr) == MSAR_BOOT_NAND_WITH_BOOTROM_6180)
+            return MV_TRUE;
+        else
+            return MV_FALSE;
+    }
+    satr = satr & MSAR_BOOT_MODE_MASK;    
+    if ((satr == MSAR_BOOT_NAND_WITH_BOOTROM))
+        return MV_TRUE;
+    else
+        return MV_FALSE;
+}
+
+#if defined(MV_INCLUDE_CLK_PWR_CNTRL)
+/*******************************************************************************
+* mvCtrlPwrSaveOn - Set Power save mode
+*
+* DESCRIPTION:		
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+*******************************************************************************/
+MV_VOID   mvCtrlPwrSaveOn(MV_VOID)
+{
+	unsigned long old,temp;
+	/* Disable int */
+	__asm__ __volatile__("mrs %0, cpsr\n"
+			     "orr %1, %0, #0xc0\n"
+			     "msr cpsr_c, %1"
+			     : "=r" (old), "=r" (temp)
+			     :
+			     : "memory");
+
+	/* Set SoC in power save */
+	MV_REG_BIT_SET(POWER_MNG_CTRL_REG, BIT11);
+	/* Wait for int */
+	__asm__ __volatile__("mcr    p15, 0, r0, c7, c0, 4");
+
+	/* Enabled int */
+	__asm__ __volatile__("msr cpsr_c, %0"
+			     :
+			     : "r" (old)
+			     : "memory");
+}
+
+
+
+/*******************************************************************************
+* mvCtrlPwrSaveOff - Go out of power save mode
+*
+* DESCRIPTION:		
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+*******************************************************************************/
+MV_VOID   mvCtrlPwrSaveOff(MV_VOID)
+{
+	unsigned long old,temp;
+	/* Disable int */
+	__asm__ __volatile__("mrs %0, cpsr\n"
+			     "orr %1, %0, #0xc0\n"
+			     "msr cpsr_c, %1"
+			     : "=r" (old), "=r" (temp)
+			     :
+			     : "memory");
+
+	/* Set SoC in power save */
+	MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, BIT11);
+	/* Wait for int */
+	__asm__ __volatile__("mcr    p15, 0, r0, c7, c0, 4");
+
+	/* Enabled int */
+	__asm__ __volatile__("msr cpsr_c, %0"
+			     :
+			     : "r" (old)
+			     : "memory");
+}
+
+/*******************************************************************************
+* mvCtrlPwrClckSet - Set Power State for specific Unit
+*
+* DESCRIPTION:		
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+*******************************************************************************/
+MV_VOID   mvCtrlPwrClckSet(MV_UNIT_ID unitId, MV_U32 index, MV_BOOL enable)
+{
+	switch (unitId)
+    {
+#if defined(MV_INCLUDE_PEX)
+	case PEX_UNIT_ID:
+		if (enable == MV_FALSE)
+		{
+			MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_PEXSTOPCLOCK_MASK);
+		}
+		else
+		{
+			MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_PEXSTOPCLOCK_MASK);
+		}
+		break;
+#endif
+#if defined(MV_INCLUDE_GIG_ETH)
+	case ETH_GIG_UNIT_ID:
+		if (enable == MV_FALSE)
+		{
+			MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_GESTOPCLOCK_MASK(index));
+		}
+		else
+		{
+			MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_GESTOPCLOCK_MASK(index));
+		}
+		break;
+#endif
+#if defined(MV_INCLUDE_INTEG_SATA)
+	case SATA_UNIT_ID:
+		if (enable == MV_FALSE)
+		{
+			MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_SATASTOPCLOCK_MASK(index));
+		}
+		else
+		{
+			MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_SATASTOPCLOCK_MASK(index));
+		}
+		break;
+#endif
+#if defined(MV_INCLUDE_CESA)
+	case CESA_UNIT_ID:
+		if (enable == MV_FALSE)
+		{
+			MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_SESTOPCLOCK_MASK);
+		}
+		else
+		{
+			MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_SESTOPCLOCK_MASK);
+		}
+		break;
+#endif
+#if defined(MV_INCLUDE_USB)
+	case USB_UNIT_ID:
+		if (enable == MV_FALSE)
+		{
+			MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_USBSTOPCLOCK_MASK);
+		}
+		else
+		{
+			MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_USBSTOPCLOCK_MASK);
+		}
+		break;
+#endif
+#if defined(MV_INCLUDE_AUDIO)
+	case AUDIO_UNIT_ID:
+		if (enable == MV_FALSE)
+		{
+			MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_AUDIOSTOPCLOCK_MASK);
+		}
+		else
+		{
+			MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_AUDIOSTOPCLOCK_MASK);
+		}
+		break;
+#endif
+#if defined(MV_INCLUDE_TS)
+	case TS_UNIT_ID:
+		if (enable == MV_FALSE)
+		{
+			MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_TSSTOPCLOCK_MASK);
+		}
+		else
+		{
+			MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_TSSTOPCLOCK_MASK);
+		}
+		break;
+#endif
+#if defined(MV_INCLUDE_SDIO)
+	case SDIO_UNIT_ID:
+		if (enable == MV_FALSE)
+		{
+			MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_SDIOSTOPCLOCK_MASK);
+		}
+		else
+		{
+			MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_SDIOSTOPCLOCK_MASK);
+		}
+		break;
+#endif
+#if defined(MV_INCLUDE_TDM)
+	case TDM_UNIT_ID:
+		if (enable == MV_FALSE)
+		{
+			MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_TDMSTOPCLOCK_MASK);
+		}
+		else
+		{
+			MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_TDMSTOPCLOCK_MASK);
+		}
+		break;
+#endif
+
+	default:
+
+		break;
+
+	}
+}
+
+/*******************************************************************************
+* mvCtrlPwrClckGet - Get Power State of specific Unit
+*
+* DESCRIPTION:		
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+******************************************************************************/
+MV_BOOL		mvCtrlPwrClckGet(MV_UNIT_ID unitId, MV_U32 index)
+{
+	MV_U32 reg = MV_REG_READ(POWER_MNG_CTRL_REG);
+	MV_BOOL state = MV_TRUE;
+
+	switch (unitId)
+    {
+#if defined(MV_INCLUDE_PEX)
+	case PEX_UNIT_ID:
+		if ((reg & PMC_PEXSTOPCLOCK_MASK) == PMC_PEXSTOPCLOCK_STOP)
+		{
+			state = MV_FALSE;
+		}
+		else state = MV_TRUE;
+
+		break;
+#endif
+#if defined(MV_INCLUDE_GIG_ETH)
+	case ETH_GIG_UNIT_ID:
+		if ((reg & PMC_GESTOPCLOCK_MASK(index)) == PMC_GESTOPCLOCK_STOP(index))
+		{
+			state = MV_FALSE;
+		}
+		else state = MV_TRUE;
+		break;
+#endif
+#if defined(MV_INCLUDE_SATA)
+	case SATA_UNIT_ID:
+		if ((reg & PMC_SATASTOPCLOCK_MASK(index)) == PMC_SATASTOPCLOCK_STOP(index))
+		{
+			state = MV_FALSE;
+		}
+		else state = MV_TRUE;
+		break;
+#endif
+#if defined(MV_INCLUDE_CESA)
+	case CESA_UNIT_ID:
+		if ((reg & PMC_SESTOPCLOCK_MASK) == PMC_SESTOPCLOCK_STOP)
+		{
+			state = MV_FALSE;
+		}
+		else state = MV_TRUE;
+		break;
+#endif
+#if defined(MV_INCLUDE_USB)
+	case USB_UNIT_ID:
+		if ((reg & PMC_USBSTOPCLOCK_MASK) == PMC_USBSTOPCLOCK_STOP)
+		{
+			state = MV_FALSE;
+		}
+		else state = MV_TRUE;
+		break;
+#endif
+#if defined(MV_INCLUDE_AUDIO)
+	case AUDIO_UNIT_ID:
+		if ((reg & PMC_AUDIOSTOPCLOCK_MASK) == PMC_AUDIOSTOPCLOCK_STOP)
+		{
+			state = MV_FALSE;
+		}
+		else state = MV_TRUE;
+		break;
+#endif
+#if defined(MV_INCLUDE_TS)
+	case TS_UNIT_ID:
+		if ((reg & PMC_TSSTOPCLOCK_MASK) == PMC_TSSTOPCLOCK_STOP)
+		{
+			state = MV_FALSE;
+		}
+		else state = MV_TRUE;
+		break;
+#endif
+#if defined(MV_INCLUDE_SDIO)
+	case SDIO_UNIT_ID:
+		if ((reg & PMC_SDIOSTOPCLOCK_MASK)== PMC_SDIOSTOPCLOCK_STOP)
+		{
+			state = MV_FALSE;
+		}
+		else state = MV_TRUE;
+		break;
+#endif
+#if defined(MV_INCLUDE_TDM)
+	case TDM_UNIT_ID:
+		if ((reg & PMC_TDMSTOPCLOCK_MASK) == PMC_TDMSTOPCLOCK_STOP)
+		{
+			state = MV_FALSE;
+		}
+		else state = MV_TRUE;
+		break;
+#endif
+
+	default:
+		state = MV_TRUE;
+		break;
+	}
+
+
+	return state;	
+}
+/*******************************************************************************
+* mvCtrlPwrMemSet - Set Power State for memory on specific Unit
+*
+* DESCRIPTION:		
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+*******************************************************************************/
+MV_VOID   mvCtrlPwrMemSet(MV_UNIT_ID unitId, MV_U32 index, MV_BOOL enable)
+{
+	switch (unitId)
+    {
+#if defined(MV_INCLUDE_PEX)
+	case PEX_UNIT_ID:
+		if (enable == MV_FALSE)
+		{
+			MV_REG_BIT_SET(POWER_MNG_MEM_CTRL_REG, PMC_PEXSTOPMEM_MASK);
+		}
+		else
+		{
+			MV_REG_BIT_RESET(POWER_MNG_MEM_CTRL_REG, PMC_PEXSTOPMEM_MASK);
+		}
+		break;
+#endif
+#if defined(MV_INCLUDE_GIG_ETH)
+	case ETH_GIG_UNIT_ID:
+		if (enable == MV_FALSE)
+		{
+			MV_REG_BIT_SET(POWER_MNG_MEM_CTRL_REG, PMC_GESTOPMEM_MASK(index));
+		}
+		else
+		{
+			MV_REG_BIT_RESET(POWER_MNG_MEM_CTRL_REG, PMC_GESTOPMEM_MASK(index));
+		}
+		break;
+#endif
+#if defined(MV_INCLUDE_INTEG_SATA)
+	case SATA_UNIT_ID:
+		if (enable == MV_FALSE)
+		{
+			MV_REG_BIT_SET(POWER_MNG_MEM_CTRL_REG, PMC_SATASTOPMEM_MASK(index));
+		}
+		else
+		{
+			MV_REG_BIT_RESET(POWER_MNG_MEM_CTRL_REG, PMC_SATASTOPMEM_MASK(index));
+		}
+		break;
+#endif
+#if defined(MV_INCLUDE_CESA)
+	case CESA_UNIT_ID:
+		if (enable == MV_FALSE)
+		{
+			MV_REG_BIT_SET(POWER_MNG_MEM_CTRL_REG, PMC_SESTOPMEM_MASK);
+		}
+		else
+		{
+			MV_REG_BIT_RESET(POWER_MNG_MEM_CTRL_REG, PMC_SESTOPMEM_MASK);
+		}
+		break;
+#endif
+#if defined(MV_INCLUDE_USB)
+	case USB_UNIT_ID:
+		if (enable == MV_FALSE)
+		{
+			MV_REG_BIT_SET(POWER_MNG_MEM_CTRL_REG, PMC_USBSTOPMEM_MASK);
+		}
+		else
+		{
+			MV_REG_BIT_RESET(POWER_MNG_MEM_CTRL_REG, PMC_USBSTOPMEM_MASK);
+		}
+		break;
+#endif
+#if defined(MV_INCLUDE_AUDIO)
+	case AUDIO_UNIT_ID:
+		if (enable == MV_FALSE)
+		{
+			MV_REG_BIT_SET(POWER_MNG_MEM_CTRL_REG, PMC_AUDIOSTOPMEM_MASK);
+		}
+		else
+		{
+			MV_REG_BIT_RESET(POWER_MNG_MEM_CTRL_REG, PMC_AUDIOSTOPMEM_MASK);
+		}
+		break;
+#endif
+#if defined(MV_INCLUDE_XOR)
+	case XOR_UNIT_ID:
+		if (enable == MV_FALSE)
+		{
+			MV_REG_BIT_SET(POWER_MNG_MEM_CTRL_REG, PMC_XORSTOPMEM_MASK(index));
+		}
+		else
+		{
+			MV_REG_BIT_RESET(POWER_MNG_MEM_CTRL_REG, PMC_XORSTOPMEM_MASK(index));
+		}
+		break;
+#endif
+	default:
+
+		break;
+
+	}
+}
+
+/*******************************************************************************
+* mvCtrlPwrMemGet - Get Power State of memory on specific Unit
+*
+* DESCRIPTION:		
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+******************************************************************************/
+MV_BOOL		mvCtrlPwrMemGet(MV_UNIT_ID unitId, MV_U32 index)
+{
+	MV_U32 reg = MV_REG_READ(POWER_MNG_MEM_CTRL_REG);
+	MV_BOOL state = MV_TRUE;
+
+	switch (unitId)
+    {
+#if defined(MV_INCLUDE_PEX)
+	case PEX_UNIT_ID:
+		if ((reg & PMC_PEXSTOPMEM_MASK) == PMC_PEXSTOPMEM_STOP)
+		{
+			state = MV_FALSE;
+		}
+		else state = MV_TRUE;
+
+		break;
+#endif
+#if defined(MV_INCLUDE_GIG_ETH)
+	case ETH_GIG_UNIT_ID:
+		if ((reg & PMC_GESTOPMEM_MASK(index)) == PMC_GESTOPMEM_STOP(index))
+		{
+			state = MV_FALSE;
+		}
+		else state = MV_TRUE;
+		break;
+#endif
+#if defined(MV_INCLUDE_SATA)
+	case SATA_UNIT_ID:
+		if ((reg & PMC_SATASTOPMEM_MASK(index)) == PMC_SATASTOPMEM_STOP(index))
+		{
+			state = MV_FALSE;
+		}
+		else state = MV_TRUE;
+		break;
+#endif
+#if defined(MV_INCLUDE_CESA)
+	case CESA_UNIT_ID:
+		if ((reg & PMC_SESTOPMEM_MASK) == PMC_SESTOPMEM_STOP)
+		{
+			state = MV_FALSE;
+		}
+		else state = MV_TRUE;
+		break;
+#endif
+#if defined(MV_INCLUDE_USB)
+	case USB_UNIT_ID:
+		if ((reg & PMC_USBSTOPMEM_MASK) == PMC_USBSTOPMEM_STOP)
+		{
+			state = MV_FALSE;
+		}
+		else state = MV_TRUE;
+		break;
+#endif
+#if defined(MV_INCLUDE_AUDIO)
+	case AUDIO_UNIT_ID:
+		if ((reg & PMC_AUDIOSTOPMEM_MASK) == PMC_AUDIOSTOPMEM_STOP)
+		{
+			state = MV_FALSE;
+		}
+		else state = MV_TRUE;
+		break;
+#endif
+#if defined(MV_INCLUDE_XOR)
+	case XOR_UNIT_ID:
+		if ((reg & PMC_XORSTOPMEM_MASK(index)) == PMC_XORSTOPMEM_STOP(index))
+		{
+			state = MV_FALSE;
+		}
+		else state = MV_TRUE;
+		break;
+#endif
+
+	default:
+		state = MV_TRUE;
+		break;
+	}
+
+
+	return state;	
+}
+#else
+MV_VOID   mvCtrlPwrClckSet(MV_UNIT_ID unitId, MV_U32 index, MV_BOOL enable) {return;}
+MV_BOOL	  mvCtrlPwrClckGet(MV_UNIT_ID unitId, MV_U32 index) {return MV_TRUE;}
+#endif /* #if defined(MV_INCLUDE_CLK_PWR_CNTRL) */
+
+
+/*******************************************************************************
+* mvMPPConfigToSPI - Change MPP[3:0] configuration to SPI mode
+*
+* DESCRIPTION:		
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+******************************************************************************/
+MV_VOID   mvMPPConfigToSPI(MV_VOID)
+{
+	MV_U32 mppVal = 0;
+	MV_U32 bootVal = 0;
+
+    if(!mvCtrlIsBootFromSPIUseNAND())
+        return;
+    mppVal = 0x00002220; /* Set MPP [3:1] to SPI mode */
+    bootVal = MV_REG_READ(mvCtrlMppRegGet(0));
+    bootVal &= 0xffff000f;
+        mppVal |= bootVal;
+    
+    MV_REG_WRITE(mvCtrlMppRegGet(0), mppVal);
+}
+
+
+/*******************************************************************************
+* mvMPPConfigToDefault - Change MPP[7:0] configuration to default configuration
+*
+* DESCRIPTION:		
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+******************************************************************************/
+MV_VOID   mvMPPConfigToDefault(MV_VOID)
+{
+	MV_U32 mppVal = 0;
+	MV_U32 bootVal = 0;
+
+    if(!mvCtrlIsBootFromSPIUseNAND())
+        return;
+    mppVal = mvBoardMppGet(0);
+    bootVal = MV_REG_READ(mvCtrlMppRegGet(0));
+    mppVal &= ~0xffff000f;
+    bootVal &= 0xffff000f;
+        mppVal |= bootVal;
+    
+    MV_REG_WRITE(mvCtrlMppRegGet(0), mppVal);
+}
+
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvLib.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvLib.h
new file mode 100644
index 0000000000..6e2e8137a7
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvLib.h
@@ -0,0 +1,185 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvCtrlEnvLibh
+#define __INCmvCtrlEnvLibh
+
+/* includes */
+#include "mvSysHwConfig.h"
+#include "mvCommon.h"
+#include "mvTypes.h"
+#include "mvOs.h"
+#include "boardEnv/mvBoardEnvLib.h"			
+#include "ctrlEnv/mvCtrlEnvSpec.h"
+#include "ctrlEnv/mvCtrlEnvRegs.h"
+#include "ctrlEnv/mvCtrlEnvAddrDec.h"
+
+
+/* typedefs */
+
+/* This enumerator describes the possible HW cache coherency policies the   */
+/* controllers supports.                                                    */
+typedef enum _mvCachePolicy
+{
+    NO_COHERENCY,   /* No HW cache coherency support                        */
+    WT_COHERENCY,   /* HW cache coherency supported in Write Through policy */
+    WB_COHERENCY    /* HW cache coherency supported in Write Back policy    */   
+}MV_CACHE_POLICY;
+
+
+/* The swapping is referred to a 64-bit words (as this is the controller    */
+/* internal data path width). This enumerator describes the possible        */
+/* data swap types. Below is an example of the data 0x0011223344556677      */
+typedef enum _mvSwapType
+{
+    MV_BYTE_SWAP,       /* Byte Swap                77 66 55 44 33 22 11 00 */             
+    MV_NO_SWAP,         /* No swapping              00 11 22 33 44 55 66 77 */
+    MV_BYTE_WORD_SWAP,  /* Both byte and word swap  33 22 11 00 77 66 55 44 */
+    MV_WORD_SWAP,       /* Word swap                44 55 66 77 00 11 22 33 */
+    SWAP_TYPE_MAX	/* Delimiter for this enumerator					*/
+}MV_SWAP_TYPE;
+
+/* This structure describes access rights for Access protection windows     */
+/* that can be found in IDMA, XOR, Ethernet and MPSC units.                 */
+/* Note that the permission enumerator coresponds to its register format.   */
+/* For example, Read only premission is presented as "1" in register field. */
+typedef enum _mvAccessRights
+{
+    	NO_ACCESS_ALLOWED = 0,  /* No access allowed            */
+    	READ_ONLY         = 1,  /* Read only permission         */
+	ACC_RESERVED	  = 2,	/* Reserved access right		*/
+    	FULL_ACCESS       = 3,  /* Read and Write permission    */
+	MAX_ACC_RIGHTS
+}MV_ACCESS_RIGHTS;
+
+
+/* mcspLib.h API list */
+
+MV_STATUS mvCtrlEnvInit(MV_VOID);
+MV_U32    mvCtrlMppRegGet(MV_U32 mppGroup);
+
+#if defined(MV_INCLUDE_PEX)
+MV_U32	  mvCtrlPexMaxIfGet(MV_VOID);
+#else
+#define   mvCtrlPexMaxIfGet()	(0)
+#endif
+
+#define   mvCtrlPciIfMaxIfGet()	(0)
+
+#if defined(MV_INCLUDE_GIG_ETH) 
+MV_U32	  mvCtrlEthMaxPortGet(MV_VOID);
+#endif
+#if defined(MV_INCLUDE_XOR)
+MV_U32 mvCtrlXorMaxChanGet(MV_VOID);
+#endif
+#if defined(MV_INCLUDE_USB)
+MV_U32 	  mvCtrlUsbMaxGet(MV_VOID);
+#endif
+#if defined(MV_INCLUDE_NAND)
+MV_U32	  mvCtrlNandSupport(MV_VOID);
+#endif
+#if defined(MV_INCLUDE_SDIO)
+MV_U32	  mvCtrlSdioSupport(MV_VOID);
+#endif
+#if defined(MV_INCLUDE_TS)
+MV_U32	  mvCtrlTsSupport(MV_VOID);
+#endif
+#if defined(MV_INCLUDE_AUDIO)
+MV_U32	  mvCtrlAudioSupport(MV_VOID);
+#endif
+#if defined(MV_INCLUDE_TDM)
+MV_U32	  mvCtrlTdmSupport(MV_VOID);
+#endif
+
+MV_U16    mvCtrlModelGet(MV_VOID);
+MV_U8     mvCtrlRevGet(MV_VOID);
+MV_STATUS mvCtrlNameGet(char *pNameBuff);
+MV_U32    mvCtrlModelRevGet(MV_VOID);
+MV_STATUS mvCtrlModelRevNameGet(char *pNameBuff);
+MV_VOID   mvCtrlAddrDecShow(MV_VOID);
+const MV_8* mvCtrlTargetNameGet(MV_TARGET target);
+MV_U32	  ctrlSizeToReg(MV_U32 size, MV_U32 alignment);
+MV_U32	  ctrlRegToSize(MV_U32 regSize, MV_U32 alignment);
+MV_U32	  ctrlSizeRegRoundUp(MV_U32 size, MV_U32 alignment);
+MV_U32	  mvCtrlSysRstLengthCounterGet(MV_VOID);
+MV_STATUS ctrlWinOverlapTest(MV_ADDR_WIN *pAddrWin1, MV_ADDR_WIN *pAddrWin2);
+MV_STATUS ctrlWinWithinWinTest(MV_ADDR_WIN *pAddrWin1, MV_ADDR_WIN *pAddrWin2);
+
+MV_VOID   mvCtrlPwrClckSet(MV_UNIT_ID unitId, MV_U32 index, MV_BOOL enable);
+MV_BOOL	  mvCtrlPwrClckGet(MV_UNIT_ID unitId, MV_U32 index);
+MV_VOID   mvCtrlPwrMemSet(MV_UNIT_ID unitId, MV_U32 index, MV_BOOL enable);
+MV_BOOL	  mvCtrlIsBootFromSPI(MV_VOID);
+MV_BOOL	  mvCtrlIsBootFromSPIUseNAND(MV_VOID);
+MV_BOOL	  mvCtrlIsBootFromNAND(MV_VOID);
+#if defined(MV_INCLUDE_CLK_PWR_CNTRL)
+MV_VOID   mvCtrlPwrSaveOn(MV_VOID);
+MV_VOID   mvCtrlPwrSaveOff(MV_VOID);
+#endif
+MV_BOOL	  mvCtrlPwrMemGet(MV_UNIT_ID unitId, MV_U32 index);
+MV_VOID   mvMPPConfigToSPI(MV_VOID);
+MV_VOID   mvMPPConfigToDefault(MV_VOID);
+
+
+#endif /* __INCmvCtrlEnvLibh */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvRegs.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvRegs.h
new file mode 100644
index 0000000000..ae3f141a0d
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvRegs.h
@@ -0,0 +1,419 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+        this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvCtrlEnvRegsh
+#define __INCmvCtrlEnvRegsh
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* CV Support */
+#define PEX0_MEM0 	PEX0_MEM
+#define PCI0_MEM0	PEX0_MEM
+
+/* Controller revision info */
+#define PCI_CLASS_CODE_AND_REVISION_ID			    0x008
+#define PCCRIR_REVID_OFFS				    0		/* Revision ID */
+#define PCCRIR_REVID_MASK				    (0xff << PCCRIR_REVID_OFFS)
+
+/* Controler environment registers offsets */
+
+/* Power Managment Control */
+#define POWER_MNG_MEM_CTRL_REG			0x20118
+
+#define PMC_GESTOPMEM_OFFS(port)		((port)? 13 : 0)
+#define PMC_GESTOPMEM_MASK(port)		(1 << PMC_GESTOPMEM_OFFS(port))
+#define PMC_GESTOPMEM_EN(port)			(0 << PMC_GESTOPMEM_OFFS(port))
+#define PMC_GESTOPMEM_STOP(port)		(1 << PMC_GESTOPMEM_OFFS(port))
+
+#define PMC_PEXSTOPMEM_OFFS			1
+#define PMC_PEXSTOPMEM_MASK			(1 << PMC_PEXSTOPMEM_OFFS)
+#define PMC_PEXSTOPMEM_EN			(0 << PMC_PEXSTOPMEM_OFFS)
+#define PMC_PEXSTOPMEM_STOP			(1 << PMC_PEXSTOPMEM_OFFS)
+
+#define PMC_USBSTOPMEM_OFFS			2
+#define PMC_USBSTOPMEM_MASK			(1 << PMC_USBSTOPMEM_OFFS)
+#define PMC_USBSTOPMEM_EN			(0 << PMC_USBSTOPMEM_OFFS)
+#define PMC_USBSTOPMEM_STOP			(1 << PMC_USBSTOPMEM_OFFS)
+
+#define PMC_DUNITSTOPMEM_OFFS			3
+#define PMC_DUNITSTOPMEM_MASK			(1 << PMC_DUNITSTOPMEM_OFFS)
+#define PMC_DUNITSTOPMEM_EN			(0 << PMC_DUNITSTOPMEM_OFFS)
+#define PMC_DUNITSTOPMEM_STOP			(1 << PMC_DUNITSTOPMEM_OFFS)
+
+#define PMC_RUNITSTOPMEM_OFFS			4
+#define PMC_RUNITSTOPMEM_MASK			(1 << PMC_RUNITSTOPMEM_OFFS)
+#define PMC_RUNITSTOPMEM_EN			(0 << PMC_RUNITSTOPMEM_OFFS)
+#define PMC_RUNITSTOPMEM_STOP			(1 << PMC_RUNITSTOPMEM_OFFS)
+
+#define PMC_XORSTOPMEM_OFFS(port)		(5+(port*2))
+#define PMC_XORSTOPMEM_MASK(port)		(1 << PMC_XORSTOPMEM_OFFS(port))
+#define PMC_XORSTOPMEM_EN(port)			(0 << PMC_XORSTOPMEM_OFFS(port))
+#define PMC_XORSTOPMEM_STOP(port)		(1 << PMC_XORSTOPMEM_OFFS(port))
+
+#define PMC_SATASTOPMEM_OFFS(port)		(6+(port*5))
+#define PMC_SATASTOPMEM_MASK(port)		(1 << PMC_SATASTOPMEM_OFFS(port))
+#define PMC_SATASTOPMEM_EN(port)		(0 << PMC_SATASTOPMEM_OFFS(port))
+#define PMC_SATASTOPMEM_STOP(port)		(1 << PMC_SATASTOPMEM_OFFS(port))
+
+#define PMC_SESTOPMEM_OFFS			8
+#define PMC_SESTOPMEM_MASK			(1 << PMC_SESTOPMEM_OFFS)
+#define PMC_SESTOPMEM_EN			(0 << PMC_SESTOPMEM_OFFS)
+#define PMC_SESTOPMEM_STOP			(1 << PMC_SESTOPMEM_OFFS)
+
+#define PMC_AUDIOSTOPMEM_OFFS			9
+#define PMC_AUDIOSTOPMEM_MASK			(1 << PMC_AUDIOSTOPMEM_OFFS)
+#define PMC_AUDIOSTOPMEM_EN			(0 << PMC_AUDIOSTOPMEM_OFFS)
+#define PMC_AUDIOSTOPMEM_STOP			(1 << PMC_AUDIOSTOPMEM_OFFS)
+
+#define POWER_MNG_CTRL_REG			0x2011C
+
+#define PMC_GESTOPCLOCK_OFFS(port)		((port)? 19 : 0)
+#define PMC_GESTOPCLOCK_MASK(port)		(1 << PMC_GESTOPCLOCK_OFFS(port))
+#define PMC_GESTOPCLOCK_EN(port)		(1 << PMC_GESTOPCLOCK_OFFS(port))
+#define PMC_GESTOPCLOCK_STOP(port)		(0 << PMC_GESTOPCLOCK_OFFS(port))
+
+#define PMC_PEXPHYSTOPCLOCK_OFFS		1
+#define PMC_PEXPHYSTOPCLOCK_MASK		(1 << PMC_PEXPHYSTOPCLOCK_OFFS)
+#define PMC_PEXPHYSTOPCLOCK_EN			(1 << PMC_PEXPHYSTOPCLOCK_OFFS)
+#define PMC_PEXPHYSTOPCLOCK_STOP		(0 << PMC_PEXPHYSTOPCLOCK_OFFS)
+
+#define PMC_PEXSTOPCLOCK_OFFS			2
+#define PMC_PEXSTOPCLOCK_MASK			(1 << PMC_PEXSTOPCLOCK_OFFS)
+#define PMC_PEXSTOPCLOCK_EN			(1 << PMC_PEXSTOPCLOCK_OFFS)
+#define PMC_PEXSTOPCLOCK_STOP			(0 << PMC_PEXSTOPCLOCK_OFFS)
+
+#define PMC_USBSTOPCLOCK_OFFS			3
+#define PMC_USBSTOPCLOCK_MASK			(1 << PMC_USBSTOPCLOCK_OFFS)
+#define PMC_USBSTOPCLOCK_EN			(1 << PMC_USBSTOPCLOCK_OFFS)
+#define PMC_USBSTOPCLOCK_STOP			(0 << PMC_USBSTOPCLOCK_OFFS)
+
+#define PMC_SDIOSTOPCLOCK_OFFS			4
+#define PMC_SDIOSTOPCLOCK_MASK			(1 << PMC_SDIOSTOPCLOCK_OFFS)
+#define PMC_SDIOSTOPCLOCK_EN			(1 << PMC_SDIOSTOPCLOCK_OFFS)
+#define PMC_SDIOSTOPCLOCK_STOP			(0 << PMC_SDIOSTOPCLOCK_OFFS)
+
+#define PMC_TSSTOPCLOCK_OFFS			5
+#define PMC_TSSTOPCLOCK_MASK			(1 << PMC_TSSTOPCLOCK_OFFS)
+#define PMC_TSSTOPCLOCK_EN			(1 << PMC_TSSTOPCLOCK_OFFS)
+#define PMC_TSSTOPCLOCK_STOP			(0 << PMC_TSSTOPCLOCK_OFFS)
+
+#define PMC_AUDIOSTOPCLOCK_OFFS			9
+#define PMC_AUDIOSTOPCLOCK_MASK			(1 << PMC_AUDIOSTOPCLOCK_OFFS)
+#define PMC_AUDIOSTOPCLOCK_EN			(1 << PMC_AUDIOSTOPCLOCK_OFFS)
+#define PMC_AUDIOSTOPCLOCK_STOP			(0 << PMC_AUDIOSTOPCLOCK_OFFS)
+
+#define PMC_POWERSAVE_OFFS			11
+#define PMC_POWERSAVE_MASK			(1 << PMC_POWERSAVE_OFFS)
+#define PMC_POWERSAVE_EN			(1 << PMC_POWERSAVE_OFFS)
+#define PMC_POWERSAVE_STOP			(0 << PMC_POWERSAVE_OFFS)
+
+
+
+
+#define PMC_SATASTOPCLOCK_OFFS(port)		(14+(port))
+#define PMC_SATASTOPCLOCK_MASK(port)		(1 << PMC_SATASTOPCLOCK_OFFS(port))
+#define PMC_SATASTOPCLOCK_EN(port)		(1 << PMC_SATASTOPCLOCK_OFFS(port))
+#define PMC_SATASTOPCLOCK_STOP(port)		(0 << PMC_SATASTOPCLOCK_OFFS(port))
+
+#define PMC_SESTOPCLOCK_OFFS			17
+#define PMC_SESTOPCLOCK_MASK			(1 << PMC_SESTOPCLOCK_OFFS)
+#define PMC_SESTOPCLOCK_EN			(1 << PMC_SESTOPCLOCK_OFFS)
+#define PMC_SESTOPCLOCK_STOP			(0 << PMC_SESTOPCLOCK_OFFS)
+
+#define PMC_TDMSTOPCLOCK_OFFS			20
+#define PMC_TDMSTOPCLOCK_MASK			(1 << PMC_TDMSTOPCLOCK_OFFS)
+#define PMC_TDMSTOPCLOCK_EN			(1 << PMC_TDMSTOPCLOCK_OFFS)
+#define PMC_TDMSTOPCLOCK_STOP			(0 << PMC_TDMSTOPCLOCK_OFFS)
+
+
+/* Controler environment registers offsets */
+#define MPP_CONTROL_REG0			0x10000
+#define MPP_CONTROL_REG1			0x10004
+#define MPP_CONTROL_REG2			0x10008
+#define MPP_CONTROL_REG3			0x1000C
+#define MPP_CONTROL_REG4			0x10010
+#define MPP_CONTROL_REG5			0x10014
+#define MPP_CONTROL_REG6			0x10018
+#define MPP_SAMPLE_AT_RESET			0x10030
+#define CHIP_BOND_REG				0x10034
+#define SYSRST_LENGTH_COUNTER_REG		0x10050
+#define SLCR_COUNT_OFFS				0
+#define SLCR_COUNT_MASK				(0x1FFFFFFF << SLCR_COUNT_OFFS)
+#define SLCR_CLR_OFFS				31
+#define SLCR_CLR_MASK				(1 << SLCR_CLR_OFFS)			
+#define PCKG_OPT_MASK				0x3
+#define MPP_OUTPUT_DRIVE_REG			0x100E0
+#define MPP_RGMII0_OUTPUT_DRIVE_OFFS            7
+#define MPP_3_3_RGMII0_OUTPUT_DRIVE		(0x0 << MPP_RGMII0_OUTPUT_DRIVE_OFFS)
+#define MPP_1_8_RGMII0_OUTPUT_DRIVE		(0x1 << MPP_RGMII0_OUTPUT_DRIVE_OFFS)
+#define MPP_RGMII1_OUTPUT_DRIVE_OFFS            15
+#define MPP_3_3_RGMII1_OUTPUT_DRIVE		(0x0 << MPP_RGMII1_OUTPUT_DRIVE_OFFS)
+#define MPP_1_8_RGMII1_OUTPUT_DRIVE		(0x1 << MPP_RGMII1_OUTPUT_DRIVE_OFFS)
+
+#define MSAR_BOOT_MODE_OFFS                     12
+#define MSAR_BOOT_MODE_MASK                     (0x7 << MSAR_BOOT_MODE_OFFS)
+#define MSAR_BOOT_NAND_WITH_BOOTROM		        (0x5 << MSAR_BOOT_MODE_OFFS)
+#define MSAR_BOOT_SPI_WITH_BOOTROM              (0x4 << MSAR_BOOT_MODE_OFFS)
+#define MSAR_BOOT_SPI_USE_NAND_WITH_BOOTROM		(0x2 << MSAR_BOOT_MODE_OFFS)
+
+#define MSAR_BOOT_MODE_6180(X)                  (((X & 0x3000) >> 12) | \
+                                                ((X & 0x2) << 1))
+#define MSAR_BOOT_SPI_WITH_BOOTROM_6180         0x1
+#define MSAR_BOOT_NAND_WITH_BOOTROM_6180        0x5
+
+#define MSAR_TCLCK_OFFS				21
+#define MSAR_TCLCK_MASK				(0x1 << MSAR_TCLCK_OFFS)
+#define MSAR_TCLCK_166				(0x1 << MSAR_TCLCK_OFFS)
+#define MSAR_TCLCK_200				(0x0 << MSAR_TCLCK_OFFS)
+
+
+#define MSAR_CPUCLCK_EXTRACT(X)     (((X & 0x2) >> 1) | ((X & 0x400000) >> 21) | \
+                                    ((X & 0x18) >> 1))
+
+#define MSAR_CPUCLCK_OFFS_6180		2
+#define MSAR_CPUCLCK_MASK_6180		(0x7 << MSAR_CPUCLCK_OFFS_6180)
+
+#define MSAR_DDRCLCK_RTIO_OFFS		5
+#define MSAR_DDRCLCK_RTIO_MASK		(0xF << MSAR_DDRCLCK_RTIO_OFFS)
+
+#define MSAR_L2CLCK_EXTRACT(X)      (((X & 0x600) >> 9) | ((X & 0x80000) >> 17))
+
+#ifndef MV_ASMLANGUAGE
+/* CPU clock for 6281,6192  0->Resereved */
+#define MV_CPU_CLCK_TBL { 	0,		0, 		0, 		0,	\
+			     	600000000, 	0,		800000000,	1000000000,	\
+			     	0,	 	1200000000,	0,		0,		\
+			     	1500000000,	0,		0,		0}
+
+/* DDR clock RATIO for 6281,6192 {0,0}->Reserved */
+#define MV_DDR_CLCK_RTIO_TBL	{\
+	{0, 0}, {0, 0}, {2, 1}, {0, 0}, \
+	{3, 1}, {0, 0}, {4, 1}, {9, 2}, \
+	{5, 1}, {6, 1}, {0, 0}, {0, 0}, \
+	{0, 0}, {0, 0}, {0, 0}, {0, 0} \
+}
+
+/* L2 clock RATIO for 6281,6192 {1,1}->Reserved */
+#define MV_L2_CLCK_RTIO_TBL	{\
+	{0, 0}, {2, 1}, {0, 0}, {3, 1}, \
+	{0, 0}, {0, 0}, {0, 0}, {0, 0} \
+}
+
+/* 6180 have different clk reset sampling 		*/
+/* ARM CPU, DDR, L2 clock for 6180 {0,0,0}->Reserved 	*/
+#define MV_CPU6180_DDR_L2_CLCK_TBL    { \
+	{0,   		0,   		0		},\
+	{0,   		0,   		0		},\
+	{0,   		0,   		0		},\
+	{0,   		0,   		0		},\
+	{0,   		0,   		0		},\
+	{600000000, 	200000000, 	300000000	},\
+	{800000000, 	200000000, 	400000000	},\
+	{0,   		0,   		0		}\
+}
+
+
+
+/* These macros help units to identify a target Mbus Arbiter group */
+#define MV_TARGET_IS_DRAM(target)   \
+                            ((target >= SDRAM_CS0) && (target <= SDRAM_CS3))
+
+#define MV_TARGET_IS_PEX0(target)   \
+                            ((target >= PEX0_MEM) && (target <= PEX0_IO))
+
+#define MV_TARGET_IS_PEX1(target)   0
+
+#define MV_TARGET_IS_PEX(target) (MV_TARGET_IS_PEX0(target) || MV_TARGET_IS_PEX1(target))
+
+#define MV_TARGET_IS_DEVICE(target) \
+                            ((target >= DEVICE_CS0) && (target <= DEVICE_CS3))
+
+#define MV_PCI_DRAM_BAR_TO_DRAM_TARGET(bar)   0
+
+#define	MV_TARGET_IS_AS_BOOT(target) ((target) == (sampleAtResetTargetArray[ \
+                     (mvCtrlModelGet() == MV_6180_DEV_ID)? MSAR_BOOT_MODE_6180 \
+                     (MV_REG_READ(MPP_SAMPLE_AT_RESET)):((MV_REG_READ(MPP_SAMPLE_AT_RESET)\
+						 & MSAR_BOOT_MODE_MASK) >> MSAR_BOOT_MODE_OFFS)]))
+
+
+#define MV_CHANGE_BOOT_CS(target)	(((target) == DEV_BOOCS)?\
+					sampleAtResetTargetArray[(mvCtrlModelGet() == MV_6180_DEV_ID)? \
+                    MSAR_BOOT_MODE_6180(MV_REG_READ(MPP_SAMPLE_AT_RESET)): \
+                    ((MV_REG_READ(MPP_SAMPLE_AT_RESET) & MSAR_BOOT_MODE_MASK)\
+                     >> MSAR_BOOT_MODE_OFFS)]:(target))
+					
+#define TCLK_TO_COUNTER_RATIO   1   /* counters running in Tclk */
+
+#define BOOT_TARGETS_NAME_ARRAY {       \
+    TBL_TERM,         	\
+    TBL_TERM,         	\
+    BOOT_ROM_CS,          	\
+    TBL_TERM,         	\
+    BOOT_ROM_CS,          	\
+    BOOT_ROM_CS,          \
+    TBL_TERM,         	\
+    TBL_TERM           \
+}
+
+#define BOOT_TARGETS_NAME_ARRAY_6180 {       \
+    TBL_TERM,         	\
+    BOOT_ROM_CS,          	\
+    TBL_TERM,           \
+    TBL_TERM,           \
+    TBL_TERM,           \
+    BOOT_ROM_CS,          \
+    TBL_TERM,           \
+    TBL_TERM           \
+}
+
+
+/* For old competability */
+#define DEVICE_CS0		NFLASH_CS  
+#define DEVICE_CS1  		SPI_CS 
+#define DEVICE_CS2  		BOOT_ROM_CS 
+#define DEVICE_CS3  		DEV_BOOCS
+#define MV_BOOTDEVICE_INDEX   	0
+
+#define START_DEV_CS   		DEV_CS0
+#define DEV_TO_TARGET(dev)	((dev) + DEVICE_CS0)
+
+#define PCI_IF0_MEM0		PEX0_MEM
+#define PCI_IF0_IO		PEX0_IO
+
+
+/* This enumerator defines the Marvell controller target ID      */ 
+typedef enum _mvTargetId
+{
+    DRAM_TARGET_ID  = 0 ,    /* Port 0 -> DRAM interface         */
+    DEV_TARGET_ID   = 1,     /* Port 1 -> Nand/SPI 		*/
+    PEX0_TARGET_ID  = 4 ,    /* Port 4 -> PCI Express0 		*/
+    CRYPT_TARGET_ID = 3 ,    /* Port 3 --> Crypto Engine 	*/
+    SAGE_TARGET_ID = 12 ,    /* Port 12 -> SAGE Unit 	*/
+    MAX_TARGETS_ID
+}MV_TARGET_ID;
+
+
+/* This enumerator described the possible Controller paripheral targets.    */
+/* Controller peripherals are designated memory/IO address spaces that the  */
+/* controller can access. They are also refered as "targets"                */
+typedef enum _mvTarget
+{
+    TBL_TERM = -1, 	/* none valid target, used as targets list terminator*/
+    SDRAM_CS0,      	/* SDRAM chip select 0                          */  
+    SDRAM_CS1,      	/* SDRAM chip select 1                          */  
+    SDRAM_CS2,      	/* SDRAM chip select 2                          */  
+    SDRAM_CS3,      	/* SDRAM chip select 3                          */  
+    PEX0_MEM,		/* PCI Express 0 Memory				*/
+    PEX0_IO,		/* PCI Express 0 IO				*/
+    INTER_REGS,     	/* Internal registers                           */  
+    NFLASH_CS,     	/* NFLASH_CS					*/  
+    SPI_CS,     	/* SPI_CS					*/  
+    BOOT_ROM_CS,        /* BOOT_ROM_CS                                  */  
+    DEV_BOOCS,     	/* DEV_BOOCS					*/  
+    CRYPT_ENG,      	/* Crypto Engine				*/  
+#ifdef MV_INCLUDE_SAGE
+    SAGE_UNIT,      	/* SAGE Unit					*/  
+#endif
+    MAX_TARGETS
+
+}MV_TARGET;
+
+#define TARGETS_DEF_ARRAY	{			\
+    {0x0E, DRAM_TARGET_ID }, /* SDRAM_CS0 */		\
+    {0x0D, DRAM_TARGET_ID }, /* SDRAM_CS1 */		\
+    {0x0B, DRAM_TARGET_ID }, /* SDRAM_CS0 */		\
+    {0x07, DRAM_TARGET_ID }, /* SDRAM_CS1 */		\
+    {0xE8, PEX0_TARGET_ID }, /* PEX0_MEM */			\
+    {0xE0, PEX0_TARGET_ID }, /* PEX0_IO */			\
+    {0xFF, 0xFF           }, /* INTER_REGS */		\
+    {0x2F, DEV_TARGET_ID  },  /* NFLASH_CS */		\
+    {0x1E, DEV_TARGET_ID  },  /* SPI_CS */		 	\
+    {0x1D, DEV_TARGET_ID  },  /* BOOT_ROM_CS */     \
+    {0x1E, DEV_TARGET_ID  },  /* DEV_BOOCS */		\
+    {0x01, CRYPT_TARGET_ID}, /* CRYPT_ENG */        \
+    {0x00, SAGE_TARGET_ID }  						\
+}
+
+
+#define TARGETS_NAME_ARRAY	{	\
+    "SDRAM_CS0",    /* SDRAM_CS0 */	\
+    "SDRAM_CS1",    /* SDRAM_CS1 */	\
+    "SDRAM_CS2",    /* SDRAM_CS2 */	\
+    "SDRAM_CS3",    /* SDRAM_CS3 */	\
+    "PEX0_MEM",	    /* PEX0_MEM */	\
+    "PEX0_IO",	    /* PEX0_IO */	\
+    "INTER_REGS",   /* INTER_REGS */	\
+    "NFLASH_CS",    /* NFLASH_CS */	\
+    "SPI_CS",	    /* SPI_CS */	\
+    "BOOT_ROM_CS",  /* BOOT_ROM_CS */ \
+    "DEV_BOOTCS",   /* DEV_BOOCS */	\
+    "CRYPT_ENG",    /* CRYPT_ENG */  \
+    "SAGE_UNIT"	   /* SAGE_UNIT */	\
+}
+#endif /* MV_ASMLANGUAGE */
+
+
+#endif
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvSpec.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvSpec.h
new file mode 100644
index 0000000000..e41d80a426
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvSpec.h
@@ -0,0 +1,257 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+        this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvCtrlEnvSpech
+#define __INCmvCtrlEnvSpech
+
+#include "mvDeviceId.h"
+#include "mvSysHwConfig.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+#define MV_ARM_SOC
+#define SOC_NAME_PREFIX			"MV88F"
+
+
+/* units base and port numbers */
+#ifdef MV_ASMLANGUAGE
+#define XOR_UNIT_BASE(unit)           	0x60800
+#else
+#define MV_XOR_REG_BASE			0x60000
+#define XOR_UNIT_BASE(unit)           	((unit)? 0x60900:0x60800)
+#endif
+
+#define TDM_REG_BASE			0xD0000
+#define USB_REG_BASE(dev)       	0x50000
+#define AUDIO_REG_BASE  		0xA0000
+#define SATA_REG_BASE           	0x80000
+#define MV_CESA_REG_BASE                0x3D000
+#define MV_CESA_TDMA_REG_BASE		0x30000
+#define MV_SDIO_REG_BASE		0x90000
+#define MV_ETH_REG_BASE(port)      	(((port) == 0) ? 0x72000 : 0x76000)
+#define MV_UART_CHAN_BASE(chanNum)	(0x12000 + (chanNum * 0x100))
+#define DRAM_BASE			0x0
+#define CNTMR_BASE                  	0x20300
+#define TWSI_SLAVE_BASE(chanNum)    	0x11000
+#define PEX_IF_BASE(pexIf)      	0x40000
+#define MPP_REG_BASE			0x10000
+#define TSU_GLOBAL_REG_BASE             0xB4000
+#define MAX_AHB_TO_MBUS_REG_BASE	0x20000
+
+#define INTER_REGS_SIZE	 	 	_1M
+/* This define describes the TWSI interrupt bit and location */
+#define TWSI_CPU_MAIN_INT_CAUSE_REG		0x20200
+#define TWSI0_CPU_MAIN_INT_BIT			(1<<29)
+#define TWSI_SPEED				100000
+
+#define MV_GPP_MAX_GROUP    		2
+#define MV_CNTMR_MAX_COUNTER 		2
+#define MV_UART_MAX_CHAN		2
+#define MV_XOR_MAX_UNIT         	2
+#define MV_XOR_MAX_CHAN         	4 /* total channels for all units together*/
+#define MV_XOR_MAX_CHAN_PER_UNIT       	2 /* channels for units */
+#define MV_SATA_MAX_CHAN	 	2
+
+#define MV_6281_MPP_MAX_MODULE    	2
+#define MV_6192_MPP_MAX_MODULE    	1
+#define MV_6190_MPP_MAX_MODULE    	1
+#define MV_6180_MPP_MAX_MODULE    	2
+#define MV_6281_MPP_MAX_GROUP    	7
+#define MV_6192_MPP_MAX_GROUP    	4
+#define MV_6190_MPP_MAX_GROUP    	4
+#define MV_6180_MPP_MAX_GROUP    	3
+
+#define MV_DRAM_MAX_CS      		4
+
+/* This define describes the maximum number of supported PCI\PCIX Interfaces*/
+#define MV_PCI_MAX_IF		0
+#define MV_PCI_START_IF		0
+
+/* This define describes the maximum number of supported PEX Interfaces 	*/
+#define MV_INCLUDE_PEX0
+#define MV_DISABLE_PEX_DEVICE_BAR 
+#define MV_PEX_MAX_IF		1
+#define MV_PEX_START_IF		MV_PCI_MAX_IF
+
+/* This define describes the maximum number of supported PCI Interfaces 	*/
+#define MV_PCI_IF_MAX_IF   	(MV_PEX_MAX_IF+MV_PCI_MAX_IF)
+
+#define MV_ETH_MAX_PORTS		2
+#define MV_6281_ETH_MAX_PORTS	   	2
+#define MV_6192_ETH_MAX_PORTS	   	2
+#define MV_6190_ETH_MAX_PORTS	   	1
+#define MV_6180_ETH_MAX_PORTS	   	1
+
+#define MV_IDMA_MAX_CHAN    		0
+
+#define MV_USB_MAX_PORTS		1
+
+#define MV_USB_VERSION              1
+
+
+#define MV_6281_NAND			1
+#define MV_6192_NAND			1
+#define MV_6190_NAND			1
+#define MV_6180_NAND			0
+
+#define MV_6281_SDIO			1
+#define MV_6192_SDIO			1
+#define MV_6190_SDIO			1
+#define MV_6180_SDIO			1
+
+#define MV_6281_TS			1
+#define MV_6192_TS			1
+#define MV_6190_TS			0
+#define MV_6180_TS			0
+
+#define MV_6281_AUDIO			1
+#define MV_6192_AUDIO			1
+#define MV_6190_AUDIO			0
+#define MV_6180_AUDIO			1
+
+#define MV_6281_TDM			1
+#define MV_6192_TDM			1
+#define MV_6190_TDM			0
+#define MV_6180_TDM			0
+
+#define MV_DEVICE_MAX_CS      		4
+
+/* Others */
+#define PEX_HOST_BUS_NUM(pciIf)		(pciIf)
+#define PEX_HOST_DEV_NUM(pciIf)		0
+
+#define PCI_IO(pciIf)		(PEX0_IO)
+#define PCI_MEM(pciIf, memNum)  (PEX0_MEM0)
+/* CESA version #2: One channel, 2KB SRAM, TDMA */
+#if defined(MV_CESA_CHAIN_MODE_SUPPORT)
+	#define MV_CESA_VERSION		 	3
+#else
+#define MV_CESA_VERSION		 	2
+#endif
+#define MV_CESA_SRAM_SIZE               2*1024
+/* This define describes the maximum number of supported Ethernet ports 	*/
+#define MV_ETH_VERSION 			4
+#define MV_ETH_MAX_RXQ              	8
+#define MV_ETH_MAX_TXQ              	8
+#define MV_ETH_PORT_SGMII          	{ MV_FALSE, MV_FALSE }
+/* This define describes the the support of USB 	*/
+#define MV_USB_VERSION  		1
+
+#define MV_INCLUDE_SDRAM_CS0
+#define MV_INCLUDE_SDRAM_CS1
+#define MV_INCLUDE_SDRAM_CS2
+#define MV_INCLUDE_SDRAM_CS3
+
+#define MV_INCLUDE_DEVICE_CS0
+#define MV_INCLUDE_DEVICE_CS1
+#define MV_INCLUDE_DEVICE_CS2
+#define MV_INCLUDE_DEVICE_CS3
+
+#define MPP_GROUP_1_TYPE {\
+	{0, 0, 0}, /* Reserved for AUTO */ \
+	{0x22220000, 0x22222222, 0x2222}, /* TDM */ \
+	{0x44440000, 0x00044444, 0x0000}, /* AUDIO */ \
+	{0x33330000, 0x33003333, 0x0033}, /* RGMII */ \
+	{0x33330000, 0x03333333, 0x0033}, /* GMII */ \
+	{0x11110000, 0x11111111, 0x0001}, /* TS */ \
+	{0x33330000, 0x33333333, 0x3333}  /* MII */ \
+}
+
+#define MPP_GROUP_2_TYPE {\
+	{0, 0, 0}, /* Reserved for AUTO */ \
+	{0x22220000, 0x22222222, 0x22}, /* TDM */ \
+	{0x44440000, 0x00044444, 0x0}, /* AUDIO */ \
+	{0, 0, 0}, /* N_A */ \
+	{0, 0, 0}, /* N_A */ \
+	{0x11110000, 0x11111111, 0x01}  /* TS */ \
+}
+
+#ifndef MV_ASMLANGUAGE
+
+/* This enumerator defines the Marvell Units ID      */ 
+typedef enum _mvUnitId
+{
+    DRAM_UNIT_ID,
+    PEX_UNIT_ID,
+    ETH_GIG_UNIT_ID,
+    USB_UNIT_ID,
+    IDMA_UNIT_ID,
+    XOR_UNIT_ID,
+    SATA_UNIT_ID,
+    TDM_UNIT_ID,
+    UART_UNIT_ID,
+    CESA_UNIT_ID,
+    SPI_UNIT_ID,
+    AUDIO_UNIT_ID,
+    SDIO_UNIT_ID,
+    TS_UNIT_ID,
+    MAX_UNITS_ID
+
+}MV_UNIT_ID;
+
+#endif
+
+#endif /* __INCmvCtrlEnvSpech */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvAhbToMbus.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvAhbToMbus.c
new file mode 100644
index 0000000000..d21bb074d2
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvAhbToMbus.c
@@ -0,0 +1,1048 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED.  The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer.
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    *   Neither the name of Marvell nor the names of its contributors may be
+        used to endorse or promote products derived from this software without
+        specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+/* includes */
+#include "ctrlEnv/sys/mvAhbToMbus.h"
+#include "ctrlEnv/mvCtrlEnvAddrDec.h"
+
+#undef MV_DEBUG
+/* defines  */
+#ifdef MV_DEBUG
+	#define DB(x)	x
+#else
+	#define DB(x)
+#endif
+
+/* typedefs */
+
+
+/* CPU address remap registers offsets are inconsecutive. This struct 		*/
+/* describes address remap register offsets									*/
+typedef struct _ahbToMbusRemapRegOffs
+{
+    MV_U32 lowRegOffs;		/* Low 32-bit remap register offset			*/
+    MV_U32 highRegOffs;		/* High 32 bit remap register offset		*/
+}AHB_TO_MBUS_REMAP_REG_OFFS;
+
+/* locals   */
+static MV_STATUS ahbToMbusRemapRegOffsGet	(MV_U32 winNum,
+										AHB_TO_MBUS_REMAP_REG_OFFS *pRemapRegs);
+
+/*******************************************************************************
+* mvAhbToMbusInit - Initialize Ahb To Mbus Address Map !
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_OK laways.
+*
+*******************************************************************************/
+MV_STATUS mvAhbToMbusInit(void)
+{
+	return MV_OK;
+
+}
+
+/*******************************************************************************
+* mvAhbToMbusWinSet - Set CPU-to-peripheral winNum address window
+*
+* DESCRIPTION:
+*       This function sets
+*       address window, also known as address decode window.
+*       A new address decode window is set for specified winNum address window.
+*       If address decode window parameter structure enables the window,
+*       the routine will also enable the winNum window, allowing CPU to access
+*       the winNum window.
+*
+* INPUT:
+*       winNum      - Windows number.
+*       pAddrDecWin - CPU winNum window data structure.
+*
+* OUTPUT:
+*       N/A
+*
+* RETURN:
+*       MV_OK if CPU winNum window was set correctly, MV_ERROR in case of
+*       address window overlapps with other active CPU winNum window or
+*		trying to assign 36bit base address while CPU does not support that.
+*       The function returns MV_NOT_SUPPORTED, if the winNum is unsupported.
+*
+*******************************************************************************/
+MV_STATUS mvAhbToMbusWinSet(MV_U32 winNum, MV_AHB_TO_MBUS_DEC_WIN *pAddrDecWin)
+{
+	MV_TARGET_ATTRIB targetAttribs;
+	MV_DEC_REGS decRegs;
+
+	/* Parameter checking   */
+	if (winNum >= MAX_AHB_TO_MBUS_WINS)
+	{
+		mvOsPrintf("mvAhbToMbusWinSet: ERR. Invalid winNum %d\n", winNum);
+		return MV_NOT_SUPPORTED;
+	}
+
+
+	/* read base register*/
+	if (winNum != MV_AHB_TO_MBUS_INTREG_WIN)
+	{
+		decRegs.baseReg = MV_REG_READ(AHB_TO_MBUS_WIN_BASE_REG(winNum));
+	}
+	else
+	{
+		decRegs.baseReg = MV_REG_READ(AHB_TO_MBUS_WIN_INTEREG_REG);
+	}
+
+	/* check if address is aligned to the size */
+	if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size))
+	{
+		mvOsPrintf("mvAhbToMbusWinSet:Error setting AHB to MBUS window %d to "\
+				   "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n",
+				   winNum,
+				   mvCtrlTargetNameGet(pAddrDecWin->target),
+				   pAddrDecWin->addrWin.baseLow,
+				   pAddrDecWin->addrWin.size);
+		return MV_ERROR;
+	}
+
+	/* read control register*/
+	if (winNum != MV_AHB_TO_MBUS_INTREG_WIN)
+	{
+		decRegs.sizeReg = MV_REG_READ(AHB_TO_MBUS_WIN_CTRL_REG(winNum));
+	}
+
+	if (MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs))
+	{
+		mvOsPrintf("mvAhbToMbusWinSet:mvCtrlAddrDecToReg Failed\n");
+		return MV_ERROR;
+	}
+
+	/* enable\Disable */
+	if (MV_TRUE == pAddrDecWin->enable)
+	{
+		decRegs.sizeReg |= ATMWCR_WIN_ENABLE;
+	}
+	else
+	{
+		decRegs.sizeReg &= ~ATMWCR_WIN_ENABLE;
+	}
+
+	mvCtrlAttribGet(pAddrDecWin->target,&targetAttribs);
+
+	/* set attributes */
+	decRegs.sizeReg &= ~ATMWCR_WIN_ATTR_MASK;
+	decRegs.sizeReg |= targetAttribs.attrib << ATMWCR_WIN_ATTR_OFFS;
+	/* set target ID */
+	decRegs.sizeReg &= ~ATMWCR_WIN_TARGET_MASK;
+	decRegs.sizeReg |= targetAttribs.targetId << ATMWCR_WIN_TARGET_OFFS;
+
+#if !defined(MV_RUN_FROM_FLASH)
+    /* To be on the safe side we disable the window before writing the  */
+    /* new values.                                                      */
+	if (winNum != MV_AHB_TO_MBUS_INTREG_WIN)
+	{
+		mvAhbToMbusWinEnable(winNum,MV_FALSE);
+	}
+#endif
+
+	/* 3) Write to address decode Base Address Register                   */
+	if (winNum != MV_AHB_TO_MBUS_INTREG_WIN)
+	{
+		MV_REG_WRITE(AHB_TO_MBUS_WIN_BASE_REG(winNum), decRegs.baseReg);
+	}
+	else
+	{
+		MV_REG_WRITE(AHB_TO_MBUS_WIN_INTEREG_REG, decRegs.baseReg);
+	}
+
+
+	/* Internal register space have no size	*/
+	/* register. Do not perform size register assigment for those targets 	*/
+	if (winNum != MV_AHB_TO_MBUS_INTREG_WIN)
+	{
+		/* Write to address decode Size Register                        	*/
+		MV_REG_WRITE(AHB_TO_MBUS_WIN_CTRL_REG(winNum), decRegs.sizeReg);
+	}
+
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvAhbToMbusWinGet - Get CPU-to-peripheral winNum address window
+*
+* DESCRIPTION:
+*		Get the CPU peripheral winNum address window.
+*
+* INPUT:
+*       winNum - Peripheral winNum enumerator
+*
+* OUTPUT:
+*       pAddrDecWin - CPU winNum window information data structure.
+*
+* RETURN:
+*       MV_OK if winNum exist, MV_ERROR otherwise.
+*
+*******************************************************************************/
+MV_STATUS mvAhbToMbusWinGet(MV_U32 winNum, MV_AHB_TO_MBUS_DEC_WIN *pAddrDecWin)
+{
+	MV_DEC_REGS decRegs;
+	MV_TARGET_ATTRIB targetAttrib;
+
+
+	/* Parameter checking   */
+	if (winNum >= MAX_AHB_TO_MBUS_WINS)
+	{
+		mvOsPrintf("mvAhbToMbusWinGet: ERR. Invalid winNum %d\n", winNum);
+		return MV_NOT_SUPPORTED;
+	}
+
+
+	/* Internal register space size have no size register*/
+	if (winNum != MV_AHB_TO_MBUS_INTREG_WIN)
+	{
+		decRegs.sizeReg =  MV_REG_READ(AHB_TO_MBUS_WIN_CTRL_REG(winNum));
+	}
+	else
+	{
+		decRegs.sizeReg = 0;
+	}
+
+
+	/* Read base and size	*/
+	if (winNum != MV_AHB_TO_MBUS_INTREG_WIN)
+	{
+		decRegs.baseReg = MV_REG_READ(AHB_TO_MBUS_WIN_BASE_REG(winNum));
+	}
+	else
+	{
+		decRegs.baseReg = MV_REG_READ(AHB_TO_MBUS_WIN_INTEREG_REG);
+	}
+
+
+
+	if (MV_OK != mvCtrlRegToAddrDec(&decRegs,&(pAddrDecWin->addrWin)))
+	{
+		mvOsPrintf("mvAhbToMbusWinGet: mvCtrlRegToAddrDec Failed \n");
+		return MV_ERROR;
+	}
+
+	if (winNum == MV_AHB_TO_MBUS_INTREG_WIN)
+	{
+        pAddrDecWin->addrWin.size = INTER_REGS_SIZE;
+		pAddrDecWin->target = INTER_REGS;
+		pAddrDecWin->enable = MV_TRUE;
+
+		return MV_OK;
+	}
+
+
+	if (decRegs.sizeReg & ATMWCR_WIN_ENABLE)
+	{
+		pAddrDecWin->enable = MV_TRUE;
+	}
+	else
+	{
+		pAddrDecWin->enable = MV_FALSE;
+
+	}
+
+
+
+	if (-1 == pAddrDecWin->addrWin.size)
+	{
+		return MV_ERROR;
+	}
+
+	/* attrib and targetId */
+	targetAttrib.attrib = (decRegs.sizeReg & ATMWCR_WIN_ATTR_MASK) >>
+													ATMWCR_WIN_ATTR_OFFS;
+	targetAttrib.targetId = (decRegs.sizeReg & ATMWCR_WIN_TARGET_MASK) >>
+													ATMWCR_WIN_TARGET_OFFS;
+
+	pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib);
+
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvAhbToMbusWinTargetGet - Get Window number associated with target
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+*
+*******************************************************************************/
+MV_U32	  mvAhbToMbusWinTargetGet(MV_TARGET target)
+{
+	MV_AHB_TO_MBUS_DEC_WIN decWin;
+	MV_U32 winNum;
+
+	/* Check parameters */
+	if (target >= MAX_TARGETS)
+	{
+		mvOsPrintf("mvAhbToMbusWinTargetGet: target %d is Illigal\n", target);
+		return 0xffffffff;
+	}
+
+	if (INTER_REGS == target)
+	{
+		return MV_AHB_TO_MBUS_INTREG_WIN;
+	}
+
+	for (winNum = 0; winNum < MAX_AHB_TO_MBUS_WINS ; winNum++)
+	{
+		if (winNum == MV_AHB_TO_MBUS_INTREG_WIN)
+			continue;
+
+		if (mvAhbToMbusWinGet(winNum,&decWin) != MV_OK)
+		{
+			mvOsPrintf("mvAhbToMbusWinTargetGet: mvAhbToMbusWinGet fail\n");
+			return 0xffffffff;
+
+		}
+
+		if (decWin.enable == MV_TRUE)
+		{
+			if (decWin.target == target)
+			{
+				return winNum;
+			}
+
+		}
+
+	}
+
+	return 0xFFFFFFFF;
+
+
+}
+
+/*******************************************************************************
+* mvAhbToMbusWinAvailGet - Get First Available window number.
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+*
+*******************************************************************************/
+MV_U32    mvAhbToMbusWinAvailGet(MV_VOID)
+{
+        MV_AHB_TO_MBUS_DEC_WIN decWin;
+        MV_U32 winNum;
+
+        for (winNum = 0; winNum < MAX_AHB_TO_MBUS_WINS ; winNum++)
+        {
+                if (winNum == MV_AHB_TO_MBUS_INTREG_WIN)
+                        continue;
+
+                if (mvAhbToMbusWinGet(winNum,&decWin) != MV_OK)
+                {
+                        mvOsPrintf("mvAhbToMbusWinTargetGet: mvAhbToMbusWinGet fail\n");
+                        return 0xffffffff;
+
+                }
+
+                if (decWin.enable == MV_FALSE)
+                {
+			return winNum;
+                }
+
+        }
+
+        return 0xFFFFFFFF;
+}
+
+
+/*******************************************************************************
+* mvAhbToMbusWinEnable - Enable/disable a CPU address decode window
+*
+* DESCRIPTION:
+*       This function enable/disable a CPU address decode window.
+*       if parameter 'enable' == MV_TRUE the routine will enable the
+*       window, thus enabling CPU accesses (before enabling the window it is
+*       tested for overlapping). Otherwise, the window will be disabled.
+*
+* INPUT:
+*       winNum - Peripheral winNum enumerator.
+*       enable - Enable/disable parameter.
+*
+* OUTPUT:
+*       N/A
+*
+* RETURN:
+*       MV_ERROR if protection window number was wrong, or the window
+*       overlapps other winNum window.
+*
+*******************************************************************************/
+MV_STATUS mvAhbToMbusWinEnable(MV_U32 winNum, MV_BOOL enable)
+{
+
+	/* Parameter checking   */
+	if (winNum >= MAX_AHB_TO_MBUS_WINS)
+	{
+		mvOsPrintf("mvAhbToMbusWinEnable: ERR. Invalid winNum %d\n", winNum);
+		return MV_NOT_SUPPORTED;
+	}
+
+	/* Internal registers bar can't be disable or enabled */
+	if (winNum == MV_AHB_TO_MBUS_INTREG_WIN)
+	{
+		return (enable ? MV_OK : MV_ERROR);
+	}
+
+    if (enable == MV_TRUE)
+    {
+		/* enable the window */
+		MV_REG_BIT_SET(AHB_TO_MBUS_WIN_CTRL_REG(winNum), ATMWCR_WIN_ENABLE);
+    }
+    else
+    {   /* Disable address decode winNum window                             */
+		MV_REG_BIT_RESET(AHB_TO_MBUS_WIN_CTRL_REG(winNum), ATMWCR_WIN_ENABLE);
+    }
+
+	return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvAhbToMbusWinRemap - Set CPU remap register for address windows.
+*
+* DESCRIPTION:
+*       After a CPU address hits one of PCI address decode windows there is an
+*       option to remap the address to a different one. For example, CPU
+*       executes a read from PCI winNum window address 0x1200.0000. This
+*       can be modified so the address on the PCI bus would be 0x1400.0000
+*       Using the PCI address remap mechanism.
+*
+* INPUT:
+*       winNum      - Peripheral winNum enumerator. Must be a PCI winNum.
+*       pAddrDecWin - CPU winNum window information data structure.
+*                     Note that caller has to fill in the base field only. The
+*                     size field is ignored.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_ERROR if winNum is not a PCI one, MV_OK otherwise.
+*
+*******************************************************************************/
+MV_U32 mvAhbToMbusWinRemap(MV_U32 winNum, MV_ADDR_WIN *pAddrWin)
+{
+    MV_U32 baseAddr;
+	AHB_TO_MBUS_REMAP_REG_OFFS remapRegOffs;
+
+    MV_U32 effectiveBaseAddress=0,
+		   baseAddrValue=0,windowSizeValue=0;
+
+
+	/* Get registers offsets of given winNum 		*/
+	if (MV_NO_SUCH == ahbToMbusRemapRegOffsGet(winNum, &remapRegOffs))
+	{
+		return 0xffffffff;
+	}
+
+	/* 1) Set address remap low */
+    baseAddr = pAddrWin->baseLow;
+
+    /* Check base address aligment 					*/
+	/*
+	if (MV_IS_NOT_ALIGN(baseAddr, ATMWRLR_REMAP_LOW_ALIGNMENT))
+	{
+        mvOsPrintf("mvAhbToMbusPciRemap: Warning. Target base 0x%x unaligned\n",
+																baseAddr);
+        return MV_ERROR;
+	}
+	*/
+
+	/* BaseLow[31:16] => base register [31:16] 		*/
+	baseAddr = baseAddr & ATMWRLR_REMAP_LOW_MASK;
+
+    MV_REG_WRITE(remapRegOffs.lowRegOffs, baseAddr);
+
+	MV_REG_WRITE(remapRegOffs.highRegOffs, pAddrWin->baseHigh);
+
+
+	baseAddrValue = MV_REG_READ(AHB_TO_MBUS_WIN_BASE_REG(winNum));
+	windowSizeValue = MV_REG_READ(AHB_TO_MBUS_WIN_CTRL_REG(winNum));
+
+	baseAddrValue &= ATMWBR_BASE_MASK;
+	windowSizeValue &=ATMWCR_WIN_SIZE_MASK;
+
+   /* Start calculating the effective Base Address */
+   effectiveBaseAddress = baseAddrValue ;
+
+   /* The effective base address will be combined from the chopped (if any)
+	  remap value (according to the size value and remap mechanism) and the
+	  window's base address */
+   effectiveBaseAddress |= (((windowSizeValue) | 0xffff) & pAddrWin->baseLow);
+   /* If the effectiveBaseAddress exceed the window boundaries return an
+	  invalid value. */
+
+   if (effectiveBaseAddress > (baseAddrValue + (windowSizeValue | 0xffff)))
+   {
+		mvOsPrintf("mvAhbToMbusPciRemap: Error\n");
+		return 0xffffffff;
+   }
+
+	return effectiveBaseAddress;
+
+
+}
+/*******************************************************************************
+* mvAhbToMbusWinTargetSwap - Swap AhbToMbus windows between targets
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       target1      - CPU Interface target 1
+*       target2      - CPU Interface target 2
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_ERROR if targets are illigal, or if one of the targets is not
+*	    associated to a valid window .
+*       MV_OK otherwise.
+*
+*******************************************************************************/
+
+
+MV_STATUS mvAhbToMbusWinTargetSwap(MV_TARGET target1,MV_TARGET target2)
+{
+	MV_U32 winNum1,winNum2;
+	MV_AHB_TO_MBUS_DEC_WIN winDec1,winDec2,winDecTemp;
+	AHB_TO_MBUS_REMAP_REG_OFFS remapRegs1,remapRegs2;
+	MV_U32 remapBaseLow1=0,remapBaseLow2=0;
+	MV_U32 remapBaseHigh1=0,remapBaseHigh2=0;
+
+
+	/* Check parameters */
+	if (target1 >= MAX_TARGETS)
+	{
+		mvOsPrintf("mvAhbToMbusWinTargetSwap: target %d is Illigal\n", target1);
+		return MV_ERROR;
+	}
+
+	if (target2 >= MAX_TARGETS)
+	{
+		mvOsPrintf("mvAhbToMbusWinTargetSwap: target %d is Illigal\n", target1);
+		return MV_ERROR;
+	}
+
+
+    /* get window associated with this target */
+	winNum1 = mvAhbToMbusWinTargetGet(target1);
+
+	if (winNum1 == 0xffffffff)
+	{
+		mvOsPrintf("mvAhbToMbusWinTargetSwap: target %d has illigal win %d\n",
+					target1,winNum1);
+		return MV_ERROR;
+
+	}
+
+    /* get window associated with this target */
+	winNum2 = mvAhbToMbusWinTargetGet(target2);
+
+	if (winNum2 == 0xffffffff)
+	{
+		mvOsPrintf("mvAhbToMbusWinTargetSwap: target %d has illigal win %d\n",
+					target2,winNum2);
+		return MV_ERROR;
+
+	}
+
+	/* now Get original values of both Windows */
+	if (MV_OK != mvAhbToMbusWinGet(winNum1,&winDec1))
+	{
+		mvOsPrintf("mvAhbToMbusWinTargetSwap: mvAhbToMbusWinGet failed win %d\n",
+					winNum1);
+		return MV_ERROR;
+
+	}
+	if (MV_OK != mvAhbToMbusWinGet(winNum2,&winDec2))
+	{
+		mvOsPrintf("mvAhbToMbusWinTargetSwap: mvAhbToMbusWinGet failed win %d\n",
+					winNum2);
+		return MV_ERROR;
+
+	}
+
+
+	/* disable both windows */
+	if (MV_OK != mvAhbToMbusWinEnable(winNum1,MV_FALSE))
+	{
+		mvOsPrintf("mvAhbToMbusWinTargetSwap: failed to enable window %d\n",
+					winNum1);
+		return MV_ERROR;
+
+	}
+	if (MV_OK != mvAhbToMbusWinEnable(winNum2,MV_FALSE))
+	{
+		mvOsPrintf("mvAhbToMbusWinTargetSwap: failed to enable windo %d\n",
+					winNum2);
+		return MV_ERROR;
+
+	}
+
+
+	/* now swap targets */
+
+	/* first save winDec2 values */
+	winDecTemp.addrWin.baseHigh = winDec2.addrWin.baseHigh;
+	winDecTemp.addrWin.baseLow = winDec2.addrWin.baseLow;
+	winDecTemp.addrWin.size = winDec2.addrWin.size;
+	winDecTemp.enable = winDec2.enable;
+	winDecTemp.target = winDec2.target;
+
+	/* winDec2 = winDec1 */
+	winDec2.addrWin.baseHigh = winDec1.addrWin.baseHigh;
+	winDec2.addrWin.baseLow = winDec1.addrWin.baseLow;
+	winDec2.addrWin.size = winDec1.addrWin.size;
+	winDec2.enable = winDec1.enable;
+	winDec2.target = winDec1.target;
+
+
+	/* winDec1 = winDecTemp */
+	winDec1.addrWin.baseHigh = winDecTemp.addrWin.baseHigh;
+	winDec1.addrWin.baseLow = winDecTemp.addrWin.baseLow;
+	winDec1.addrWin.size = winDecTemp.addrWin.size;
+	winDec1.enable = winDecTemp.enable;
+	winDec1.target = winDecTemp.target;
+
+
+	/* now set the new values */
+
+
+    mvAhbToMbusWinSet(winNum1,&winDec1);
+	mvAhbToMbusWinSet(winNum2,&winDec2);
+
+
+
+
+
+	/* now we will treat the remap windows if exist */
+
+
+	/* now check if one or both windows has a remap window
+	as well after the swap ! */
+
+	/* if a window had a remap value differnt than the base value
+	before the swap , then after the swap the remap value will be
+	equal to the base value unless both windows has a remap windows*/
+
+	/* first get old values */
+	if (MV_NO_SUCH != ahbToMbusRemapRegOffsGet(winNum1,&remapRegs1))
+	{
+		remapBaseLow1 = MV_REG_READ(remapRegs1.lowRegOffs);
+	    remapBaseHigh1 = MV_REG_READ(remapRegs1.highRegOffs);
+
+	}
+	if (MV_NO_SUCH != ahbToMbusRemapRegOffsGet(winNum2,&remapRegs2))
+	{
+		remapBaseLow2 = MV_REG_READ(remapRegs2.lowRegOffs);
+	    remapBaseHigh2 = MV_REG_READ(remapRegs2.highRegOffs);
+
+
+	}
+
+	/* now do the swap */
+	if (MV_NO_SUCH != ahbToMbusRemapRegOffsGet(winNum1,&remapRegs1))
+	{
+		if (MV_NO_SUCH != ahbToMbusRemapRegOffsGet(winNum2,&remapRegs2))
+		{
+			/* Two windows has a remap !!! so swap */
+
+			MV_REG_WRITE(remapRegs2.highRegOffs,remapBaseHigh1);
+			MV_REG_WRITE(remapRegs2.lowRegOffs,remapBaseLow1);
+
+			MV_REG_WRITE(remapRegs1.highRegOffs,remapBaseHigh2);
+			MV_REG_WRITE(remapRegs1.lowRegOffs,remapBaseLow2);
+
+
+
+		}
+		else
+		{
+			/* remap == base */
+			MV_REG_WRITE(remapRegs1.highRegOffs,winDec1.addrWin.baseHigh);
+			MV_REG_WRITE(remapRegs1.lowRegOffs,winDec1.addrWin.baseLow);
+
+		}
+
+	}
+	else if (MV_NO_SUCH != ahbToMbusRemapRegOffsGet(winNum2,&remapRegs2))
+	{
+		/* remap == base */
+		MV_REG_WRITE(remapRegs2.highRegOffs,winDec2.addrWin.baseHigh);
+		MV_REG_WRITE(remapRegs2.lowRegOffs,winDec2.addrWin.baseLow);
+
+	}
+
+
+
+	return MV_OK;
+
+
+}
+
+
+
+#if defined(MV_88F1181)
+
+/*******************************************************************************
+* mvAhbToMbusXbarCtrlSet - Set The CPU master Xbar arbitration.
+*
+* DESCRIPTION:
+*       This function sets CPU Mbus Arbiter
+*
+* INPUT:
+*       pPizzaArbArray - A priority Structure describing 16 "pizza slices". At
+*                    each clock cycle, the crossbar arbiter samples all
+*                    requests and gives the bus to the next agent according
+*                    to the "pizza".
+*
+* OUTPUT:
+*       N/A
+*
+* RETURN:
+*       MV_ERROR if paramers to function invalid.
+*
+*******************************************************************************/
+MV_STATUS  mvMbusArbSet(MV_MBUS_ARB_TARGET *pPizzaArbArray)
+{
+	MV_U32 sliceNum;
+	MV_U32 xbarCtrl = 0;
+	MV_MBUS_ARB_TARGET xbarTarget;
+
+	/* 1) Set crossbar control low register */
+	for (sliceNum = 0; sliceNum < MRLR_SLICE_NUM; sliceNum++)
+	{
+		xbarTarget = pPizzaArbArray[sliceNum];
+
+		/* sliceNum parameter check */
+		if (xbarTarget > MAX_MBUS_ARB_TARGETS)
+		{
+			mvOsPrintf("mvAhbToMbusXbarCtrlSet: ERR. Can't set Target %d\n",
+																  xbarTarget);
+			return MV_ERROR;
+		}
+		xbarCtrl |= (xbarTarget << MRLR_LOW_ARB_OFFS(sliceNum));
+	}
+	/* Write to crossbar control low register */
+    MV_REG_WRITE(MBUS_ARBITER_LOW_REG, xbarCtrl);
+
+	xbarCtrl = 0;
+
+	/* 2) Set crossbar control high register */
+	for (sliceNum = MRLR_SLICE_NUM;
+		 sliceNum < MRLR_SLICE_NUM+MRHR_SLICE_NUM;
+		 sliceNum++)
+	{
+
+		xbarTarget = pPizzaArbArray[sliceNum];
+
+		/* sliceNum parameter check */
+		if (xbarTarget > MAX_MBUS_ARB_TARGETS)
+		{
+			mvOsPrintf("mvAhbToMbusXbarCtrlSet: ERR. Can't set Target %d\n",
+																  xbarTarget);
+			return MV_ERROR;
+		}
+		xbarCtrl |= (xbarTarget << MRHR_HIGH_ARB_OFFS(sliceNum));
+	}
+	/* Write to crossbar control high register */
+    MV_REG_WRITE(MBUS_ARBITER_HIGH_REG, xbarCtrl);
+
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvMbusArbCtrlSet - Set MBus Arbiter control register
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       ctrl  - pointer to MV_MBUS_ARB_CTRL register
+*
+* OUTPUT:
+*       N/A
+*
+* RETURN:
+*       MV_ERROR if paramers to function invalid.
+*
+*******************************************************************************/
+MV_STATUS mvMbusArbCtrlSet(MV_MBUS_ARB_CTRL *ctrl)
+{
+
+	if (ctrl->highPrio == MV_FALSE)
+	{
+		MV_REG_BIT_RESET(MBUS_ARBITER_CTRL_REG, MACR_ARB_ARM_TOP);
+	}
+	else
+	{
+		MV_REG_BIT_SET(MBUS_ARBITER_CTRL_REG, MACR_ARB_ARM_TOP);
+	}
+
+	if (ctrl->fixedRoundRobin == MV_FALSE)
+	{
+		MV_REG_BIT_RESET(MBUS_ARBITER_CTRL_REG, MACR_ARB_TARGET_FIXED);
+	}
+	else
+	{
+		MV_REG_BIT_SET(MBUS_ARBITER_CTRL_REG, MACR_ARB_TARGET_FIXED);
+	}
+
+	if (ctrl->starvEn == MV_FALSE)
+	{
+		MV_REG_BIT_RESET(MBUS_ARBITER_CTRL_REG, MACR_ARB_REQ_CTRL_EN);
+	}
+	else
+	{
+		MV_REG_BIT_SET(MBUS_ARBITER_CTRL_REG, MACR_ARB_REQ_CTRL_EN);
+	}
+
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvMbusArbCtrlGet - Get MBus Arbiter control register
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       ctrl  - pointer to MV_MBUS_ARB_CTRL register
+*
+* OUTPUT:
+*       ctrl  - pointer to MV_MBUS_ARB_CTRL register
+*
+* RETURN:
+*       MV_ERROR if paramers to function invalid.
+*
+*******************************************************************************/
+MV_STATUS mvMbusArbCtrlGet(MV_MBUS_ARB_CTRL *ctrl)
+{
+
+	MV_U32 ctrlReg = MV_REG_READ(MBUS_ARBITER_CTRL_REG);
+
+	if (ctrlReg & MACR_ARB_ARM_TOP)
+	{
+		ctrl->highPrio = MV_TRUE;
+	}
+	else
+	{
+		ctrl->highPrio = MV_FALSE;
+	}
+
+	if (ctrlReg & MACR_ARB_TARGET_FIXED)
+	{
+		ctrl->fixedRoundRobin = MV_TRUE;
+	}
+	else
+	{
+		ctrl->fixedRoundRobin = MV_FALSE;
+	}
+
+	if (ctrlReg & MACR_ARB_REQ_CTRL_EN)
+	{
+		ctrl->starvEn = MV_TRUE;
+	}
+	else
+	{
+		ctrl->starvEn = MV_FALSE;
+	}
+
+
+	return MV_OK;
+}
+
+#endif  /* #if defined(MV_88F1181) */
+
+
+
+/*******************************************************************************
+* ahbToMbusRemapRegOffsGet - Get CPU address remap register offsets
+*
+* DESCRIPTION:
+* 		CPU to PCI address remap registers offsets are inconsecutive.
+*		This function returns PCI address remap registers offsets.
+*
+* INPUT:
+*       winNum - Address decode window number. See MV_U32 enumerator.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*		MV_ERROR if winNum is not a PCI one.
+*
+*******************************************************************************/
+static MV_STATUS ahbToMbusRemapRegOffsGet(MV_U32 winNum,
+									AHB_TO_MBUS_REMAP_REG_OFFS *pRemapRegs)
+{
+	switch (winNum)
+	{
+		case 0:
+        case 1:
+			pRemapRegs->lowRegOffs  = AHB_TO_MBUS_WIN_REMAP_LOW_REG(winNum);
+			pRemapRegs->highRegOffs = AHB_TO_MBUS_WIN_REMAP_HIGH_REG(winNum);
+			break;
+		case 2:
+		case 3:
+			if((mvCtrlModelGet() == MV_5281_DEV_ID) ||
+				(mvCtrlModelGet() == MV_1281_DEV_ID) ||
+				(mvCtrlModelGet() == MV_6183_DEV_ID) ||
+               (mvCtrlModelGet() == MV_6183L_DEV_ID))
+			{
+				pRemapRegs->lowRegOffs  = AHB_TO_MBUS_WIN_REMAP_LOW_REG(winNum);
+				pRemapRegs->highRegOffs = AHB_TO_MBUS_WIN_REMAP_HIGH_REG(winNum);
+				break;
+			}
+			else
+			{
+				pRemapRegs->lowRegOffs  = 0;
+				pRemapRegs->highRegOffs = 0;
+
+				DB(mvOsPrintf("ahbToMbusRemapRegOffsGet: ERR. Invalid winNum %d\n",
+							winNum));
+				return MV_NO_SUCH;
+			}
+		default:
+		{
+			pRemapRegs->lowRegOffs  = 0;
+			pRemapRegs->highRegOffs = 0;
+
+			DB(mvOsPrintf("ahbToMbusRemapRegOffsGet: ERR. Invalid winNum %d\n",
+						winNum));
+		   	return MV_NO_SUCH;
+		}
+	}
+
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvAhbToMbusAddDecShow - Print the AHB to MBus bridge address decode map.
+*
+* DESCRIPTION:
+*		This function print the CPU address decode map.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+MV_VOID mvAhbToMbusAddDecShow(MV_VOID)
+{
+	MV_AHB_TO_MBUS_DEC_WIN win;
+	MV_U32 winNum;
+	mvOsOutput( "\n" );
+	mvOsOutput( "AHB To MBUS Bridge:\n" );
+	mvOsOutput( "-------------------\n" );
+
+	for( winNum = 0; winNum < MAX_AHB_TO_MBUS_WINS; winNum++ )
+	{
+		memset( &win, 0, sizeof(MV_AHB_TO_MBUS_DEC_WIN) );
+
+		mvOsOutput( "win%d - ", winNum );
+
+		if( mvAhbToMbusWinGet( winNum, &win ) == MV_OK )
+		{
+			if( win.enable )
+			{
+				mvOsOutput( "%s base %08x, ",
+				mvCtrlTargetNameGet(win.target), win.addrWin.baseLow );
+                		mvOsOutput( "...." );
+				mvSizePrint( win.addrWin.size );
+
+				mvOsOutput( "\n" );
+
+            }
+			else
+				mvOsOutput( "disable\n" );
+		}
+	}
+
+}
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvAhbToMbus.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvAhbToMbus.h
new file mode 100644
index 0000000000..1b352a1f6b
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvAhbToMbus.h
@@ -0,0 +1,130 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvAhbToMbush
+#define __INCmvAhbToMbush
+
+/* includes */
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "ctrlEnv/sys/mvAhbToMbusRegs.h"
+#include "ctrlEnv/mvCtrlEnvAddrDec.h"
+
+/* defines  */
+
+#if defined(MV_88F1181)
+/* This enumerator defines the Marvell controller possible MBUS arbiter     */
+/* target ports. It is used to define crossbar priority scheame (pizza)     */ 
+typedef enum _mvMBusArbTargetId
+{
+    DRAM_MBUS_ARB_TARGET = 0,    /* Port 0 -> DRAM interface         */
+    TWSI_MBUS_ARB_TARGET  = 1,     /* Port 1 -> TWSI 		    */
+    ARM_MBUS_ARB_TARGET   = 2,     /* Port 2 -> ARM		    */
+	PEX1_MBUS_ARB_TARGET  = 3,    /* Port 3 -> PCI Express 1		    */
+    PEX0_MBUS_ARB_TARGET  = 4,    /* Port 4 -> PCI Express0 		    */
+	MAX_MBUS_ARB_TARGETS
+}MV_MBUS_ARB_TARGET;
+
+typedef struct _mvMBusArbCtrl
+{
+	MV_BOOL starvEn;
+	MV_BOOL highPrio;
+	MV_BOOL fixedRoundRobin;
+
+}MV_MBUS_ARB_CTRL;
+
+#endif /* #if defined(MV_88F1181) */
+
+typedef struct _mvAhbtoMbusDecWin
+{
+	MV_TARGET	  target;
+	MV_ADDR_WIN   addrWin;    /* An address window*/
+	MV_BOOL       enable;     /* Address decode window is enabled/disabled    */
+
+}MV_AHB_TO_MBUS_DEC_WIN;
+
+/* mvAhbToMbus.h API list */
+
+MV_STATUS mvAhbToMbusInit(MV_VOID);
+MV_STATUS mvAhbToMbusWinSet(MV_U32 winNum, MV_AHB_TO_MBUS_DEC_WIN *pAddrDecWin);
+MV_STATUS mvAhbToMbusWinGet(MV_U32 winNum, MV_AHB_TO_MBUS_DEC_WIN *pAddrDecWin);
+MV_STATUS mvAhbToMbusWinEnable(MV_U32 winNum,MV_BOOL enable);
+MV_U32    mvAhbToMbusWinRemap(MV_U32 winNum, MV_ADDR_WIN *pAddrDecWin);
+MV_U32	  mvAhbToMbusWinTargetGet(MV_TARGET target);
+MV_U32    mvAhbToMbusWinAvailGet(MV_VOID);
+MV_STATUS mvAhbToMbusWinTargetSwap(MV_TARGET target1,MV_TARGET target2);
+
+#if defined(MV_88F1181)
+
+MV_STATUS mvMbusArbSet(MV_MBUS_ARB_TARGET *pPizzaArbArray);
+MV_STATUS mvMbusArbCtrlSet(MV_MBUS_ARB_CTRL *ctrl);
+MV_STATUS mvMbusArbCtrlGet(MV_MBUS_ARB_CTRL *ctrl);
+
+#endif /* #if defined(MV_88F1181) */
+
+
+MV_VOID   mvAhbToMbusAddDecShow(MV_VOID);
+
+
+#endif /* __INCmvAhbToMbush */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvAhbToMbusRegs.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvAhbToMbusRegs.h
new file mode 100644
index 0000000000..97dc631890
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvAhbToMbusRegs.h
@@ -0,0 +1,143 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvAhbToMbusRegsh
+#define __INCmvAhbToMbusRegsh
+
+/******************************/
+/* ARM Address Map Registers  */
+/******************************/
+
+#define MAX_AHB_TO_MBUS_WINS	9
+#define MV_AHB_TO_MBUS_INTREG_WIN	8
+
+
+#define AHB_TO_MBUS_WIN_CTRL_REG(winNum)		(0x20000 + (winNum)*0x10)
+#define AHB_TO_MBUS_WIN_BASE_REG(winNum)		(0x20004 + (winNum)*0x10)
+#define AHB_TO_MBUS_WIN_REMAP_LOW_REG(winNum)	(0x20008 + (winNum)*0x10)
+#define AHB_TO_MBUS_WIN_REMAP_HIGH_REG(winNum)	(0x2000C + (winNum)*0x10)
+#define AHB_TO_MBUS_WIN_INTEREG_REG				 0x20080
+
+/* Window Control Register      */
+/* AHB_TO_MBUS_WIN_CTRL_REG (ATMWCR)*/
+#define ATMWCR_WIN_ENABLE					BIT0	/* Window Enable */
+
+#define ATMWCR_WIN_TARGET_OFFS			4 /* The target interface associated 
+											 with this window*/
+#define ATMWCR_WIN_TARGET_MASK			(0xf << ATMWCR_WIN_TARGET_OFFS)
+
+#define ATMWCR_WIN_ATTR_OFFS				8 /* The target interface attributes
+											 Associated with this window */
+#define ATMWCR_WIN_ATTR_MASK				(0xff << ATMWCR_WIN_ATTR_OFFS)
+
+											 
+/*
+Used with the Base register to set the address window size and location
+Must be programed from LSB to MSB as sequence of 1’s followed
+by sequence of 0’s. The number of 1’s specifies the size of the window
+in 64 KB granularity (e.g. a value of 0x00FF specifies 256 = 16 MB).
+
+NOTE: A value of 0x0 specifies 64KB size.
+*/
+#define ATMWCR_WIN_SIZE_OFFS				16 /* Window Size */
+#define ATMWCR_WIN_SIZE_MASK				(0xffff << ATMWCR_WIN_SIZE_OFFS)
+#define ATMWCR_WIN_SIZE_ALIGNMENT			0x10000
+
+/*  Window Base Register     */
+/* AHB_TO_MBUS_WIN_BASE_REG (ATMWBR) */
+
+/*
+Used with the size field to set the address window size and location.
+Corresponds to transaction address[31:16]
+*/
+#define ATMWBR_BASE_OFFS					16 /* Base Address */
+#define ATMWBR_BASE_MASK					(0xffff << 	ATMWBR_BASE_OFFS)
+#define ATMWBR_BASE_ALIGNMENT				0x10000
+
+/*  Window Remap Low Register   */
+/* AHB_TO_MBUS_WIN_REMAP_LOW_REG (ATMWRLR) */
+
+/*
+Used with the size field to specifies address bits[31:0] to be driven to
+the target interface.:
+target_addr[31:16] = (addr[31:16] & size[15:0]) | (remap[31:16] & ~size[15:0])
+*/
+#define ATMWRLR_REMAP_LOW_OFFS			16 /* Remap Address */
+#define ATMWRLR_REMAP_LOW_MASK			(0xffff << ATMWRLR_REMAP_LOW_OFFS)
+#define ATMWRLR_REMAP_LOW_ALIGNMENT		0x10000
+
+/* Window Remap High Register   */
+/* AHB_TO_MBUS_WIN_REMAP_HIGH_REG (ATMWRHR) */
+
+/*
+Specifies address bits[63:32] to be driven to the target interface.
+target_addr[63:32] = (RemapHigh[31:0]
+*/
+#define ATMWRHR_REMAP_HIGH_OFFS			0 /* Remap Address */
+#define ATMWRHR_REMAP_HIGH_MASK			(0xffffffff << ATMWRHR_REMAP_HIGH_OFFS)
+
+
+#endif /* __INCmvAhbToMbusRegsh */
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIf.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIf.c
new file mode 100644
index 0000000000..872dc6e9d8
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIf.c
@@ -0,0 +1,1036 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED.  The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer.
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    *   Neither the name of Marvell nor the names of its contributors may be
+        used to endorse or promote products derived from this software without
+        specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+/* includes */
+#include "ctrlEnv/sys/mvCpuIf.h"
+#include "ctrlEnv/sys/mvAhbToMbusRegs.h"
+#include "cpu/mvCpu.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "mvSysHwConfig.h"
+#include "mvSysDram.h"
+
+/*#define MV_DEBUG*/
+/* defines  */
+
+#ifdef MV_DEBUG
+	#define DB(x)	x
+#else
+	#define DB(x)
+#endif
+
+/* locals   */
+/* static functions */
+static MV_BOOL cpuTargetWinOverlap(MV_TARGET target, MV_ADDR_WIN *pAddrWin);
+
+MV_TARGET * sampleAtResetTargetArray;
+MV_TARGET sampleAtResetTargetArrayP[] = BOOT_TARGETS_NAME_ARRAY;
+MV_TARGET sampleAtResetTargetArray6180P[] = BOOT_TARGETS_NAME_ARRAY_6180;
+/*******************************************************************************
+* mvCpuIfInit - Initialize Controller CPU interface
+*
+* DESCRIPTION:
+*       This function initialize Controller CPU interface:
+*       1. Set CPU interface configuration registers.
+*       2. Set CPU master Pizza arbiter control according to static
+*          configuration described in configuration file.
+*       3. Opens CPU address decode windows. DRAM windows are assumed to be
+*		   already set (auto detection).
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+MV_STATUS mvCpuIfInit(MV_CPU_DEC_WIN *cpuAddrWinMap)
+{
+	MV_U32 regVal;
+	MV_TARGET target;
+	MV_ADDR_WIN addrWin;
+
+	if (cpuAddrWinMap == NULL)
+	{
+		DB(mvOsPrintf("mvCpuIfInit:ERR. cpuAddrWinMap == NULL\n"));
+		return MV_ERROR;
+	}
+
+    /*Initialize the boot target array according to device type*/
+    if(mvCtrlModelGet() == MV_6180_DEV_ID)
+        sampleAtResetTargetArray = sampleAtResetTargetArray6180P;
+    else
+        sampleAtResetTargetArray = sampleAtResetTargetArrayP;
+
+	/* Set ARM Configuration register */
+	regVal  = MV_REG_READ(CPU_CONFIG_REG);
+	regVal &= ~CPU_CONFIG_DEFAULT_MASK;
+	regVal |= CPU_CONFIG_DEFAULT;
+	MV_REG_WRITE(CPU_CONFIG_REG,regVal);
+
+	/* First disable all CPU target windows  */
+	for (target = 0; cpuAddrWinMap[target].enable != TBL_TERM; target++)
+    	{
+		if ((MV_TARGET_IS_DRAM(target))||(target == INTER_REGS))
+		{
+			continue;
+		}
+
+#if defined(MV_MEM_OVER_PCI_WA) || defined(MV_UART_OVER_PCI_WA)
+		/* If the target PEX or PCI and memory is over PEX or PCI we don't touch this CPU windows */
+		if (MV_TARGET_IS_PCI(target))
+		{
+			continue;
+		}
+#endif
+
+#if defined(MV_MEM_OVER_PEX_WA) || defined(MV_UART_OVER_PEX_WA)
+		/* If the target PEX or PCI and memory is over PEX or PCI we don't touch this CPU windows */
+		if (MV_TARGET_IS_PEX(target))
+		{
+			continue;
+		}
+#endif
+#if defined(MV_RUN_FROM_FLASH)
+        	/* Don't disable the boot device.                               */
+		if (target == DEV_BOOCS)
+		{
+			continue;
+		}
+#endif /* MV_RUN_FROM_FLASH */
+		mvCpuIfTargetWinEnable(MV_CHANGE_BOOT_CS(target),MV_FALSE);
+	}
+
+#if defined(MV_RUN_FROM_FLASH)
+    	/* Resize the bootcs windows before other windows, because this     */
+    	/* window is enabled and will cause an overlap if not resized.      */
+	target = DEV_BOOCS;
+
+	if (MV_OK != mvCpuIfTargetWinSet(target, &cpuAddrWinMap[target]))
+	{
+		DB(mvOsPrintf("mvCpuIfInit:ERR. mvCpuIfTargetWinSet fail\n"));
+		return MV_ERROR;
+	}
+
+	addrWin.baseLow = cpuAddrWinMap[target].addrWin.baseLow;
+	addrWin.baseHigh = cpuAddrWinMap[target].addrWin.baseHigh;
+	if (0xffffffff == mvAhbToMbusWinRemap(cpuAddrWinMap[target].winNum ,&addrWin))
+	{
+		DB(mvOsPrintf("mvCpuIfInit:WARN. mvAhbToMbusWinRemap can't remap winNum=%d\n",
+					  cpuAddrWinMap[target].winNum));
+	}
+
+#endif /* MV_RUN_FROM_FLASH */
+
+	/* Go through all targets in user table until table terminator			*/
+	for (target = 0; cpuAddrWinMap[target].enable != TBL_TERM; target++)
+    	{
+
+#if defined(MV_RUN_FROM_FLASH)
+	if (target == DEV_BOOCS)
+	{
+		continue;
+	}
+#endif /* MV_RUN_FROM_FLASH */
+
+	/* if DRAM auto sizing is used do not initialized DRAM target windows, 	*/
+	/* assuming this already has been done earlier.							*/
+#ifdef	MV_DRAM_AUTO_SIZE
+		if (MV_TARGET_IS_DRAM(target))
+		{
+			continue;
+		}
+#endif
+
+#if defined(MV_MEM_OVER_PCI_WA) || defined(MV_UART_OVER_PCI_WA)
+		/* If the target PEX or PCI and memory is over PEX or PCI we don't touch this CPU windows */
+		if (MV_TARGET_IS_PCI(target))
+		{
+			continue;
+		}
+#endif
+
+#if defined(MV_MEM_OVER_PEX_WA) || defined(MV_UART_OVER_PEX_WA)
+		/* If the target PEX or PCI and memory is over PEX or PCI we don't touch this CPU windows */
+		if (MV_TARGET_IS_PEX(target))
+		{
+			continue;
+		}
+#endif
+	/* If the target attribute is the same as the boot device attribute */
+	/* then it's stays disable */
+		if (MV_TARGET_IS_AS_BOOT(target))
+		{
+			continue;
+		}
+
+		if((0 == cpuAddrWinMap[target].addrWin.size) ||
+		   (DIS == cpuAddrWinMap[target].enable))
+
+		{
+			if (MV_OK != mvCpuIfTargetWinEnable(target, MV_FALSE))
+			{
+				DB(mvOsPrintf("mvCpuIfInit:ERR. mvCpuIfTargetWinEnable fail\n"));
+				return MV_ERROR;
+			}
+
+		}
+		else
+		{
+			if (MV_OK != mvCpuIfTargetWinSet(target, &cpuAddrWinMap[target]))
+			{
+				DB(mvOsPrintf("mvCpuIfInit:ERR. mvCpuIfTargetWinSet fail\n"));
+				return MV_ERROR;
+			}
+
+			addrWin.baseLow = cpuAddrWinMap[target].addrWin.baseLow;
+			addrWin.baseHigh = cpuAddrWinMap[target].addrWin.baseHigh;
+			if (0xffffffff == mvAhbToMbusWinRemap(cpuAddrWinMap[target].winNum ,&addrWin))
+			{
+				DB(mvOsPrintf("mvCpuIfInit:WARN. mvAhbToMbusWinRemap can't remap winNum=%d\n",
+							  cpuAddrWinMap[target].winNum));
+			}
+
+
+		}
+    }
+
+	return MV_OK;
+
+
+}
+
+
+/*******************************************************************************
+* mvCpuIfTargetWinSet - Set CPU-to-peripheral target address window
+*
+* DESCRIPTION:
+*       This function sets a peripheral target (e.g. SDRAM bank0, PCI0_MEM0)
+*       address window, also known as address decode window.
+*       A new address decode window is set for specified target address window.
+*       If address decode window parameter structure enables the window,
+*       the routine will also enable the target window, allowing CPU to access
+*       the target window.
+*
+* INPUT:
+*       target      - Peripheral target enumerator.
+*       pAddrDecWin - CPU target window data structure.
+*
+* OUTPUT:
+*       N/A
+*
+* RETURN:
+*       MV_OK if CPU target window was set correctly, MV_ERROR in case of
+*       address window overlapps with other active CPU target window or
+*		trying to assign 36bit base address while CPU does not support that.
+*       The function returns MV_NOT_SUPPORTED, if the target is unsupported.
+*
+*******************************************************************************/
+MV_STATUS mvCpuIfTargetWinSet(MV_TARGET target, MV_CPU_DEC_WIN *pAddrDecWin)
+{
+	MV_AHB_TO_MBUS_DEC_WIN decWin;
+	MV_U32 existingWinNum;
+	MV_DRAM_DEC_WIN addrDecWin;
+
+	target = MV_CHANGE_BOOT_CS(target);
+
+	/* Check parameters */
+	if (target >= MAX_TARGETS)
+	{
+		mvOsPrintf("mvCpuIfTargetWinSet: target %d is Illigal\n", target);
+		return MV_ERROR;
+	}
+
+    	/* 2) Check if the requested window overlaps with current windows		*/
+    	if (MV_TRUE == cpuTargetWinOverlap(target, &pAddrDecWin->addrWin))
+	{
+        	mvOsPrintf("mvCpuIfTargetWinSet: ERR. Target %d overlap\n", target);
+		return MV_BAD_PARAM;
+	}
+
+	if (MV_TARGET_IS_DRAM(target))
+	{
+		/* copy relevant data to MV_DRAM_DEC_WIN structure */
+		addrDecWin.addrWin.baseHigh = pAddrDecWin->addrWin.baseHigh;
+		addrDecWin.addrWin.baseLow = pAddrDecWin->addrWin.baseLow;
+		addrDecWin.addrWin.size = pAddrDecWin->addrWin.size;
+		addrDecWin.enable = pAddrDecWin->enable;
+
+
+		if (mvDramIfWinSet(target,&addrDecWin) != MV_OK);
+		{
+			mvOsPrintf("mvCpuIfTargetWinSet: mvDramIfWinSet Failed\n");
+			return MV_ERROR;
+		}
+
+	}
+	else
+	{
+		/* copy relevant data to MV_AHB_TO_MBUS_DEC_WIN structure */
+		decWin.addrWin.baseLow = pAddrDecWin->addrWin.baseLow;
+		decWin.addrWin.baseHigh = pAddrDecWin->addrWin.baseHigh;
+		decWin.addrWin.size = pAddrDecWin->addrWin.size;
+		decWin.enable = pAddrDecWin->enable;
+		decWin.target = target;
+
+		existingWinNum = mvAhbToMbusWinTargetGet(target);
+
+		/* check if there is already another Window configured
+		for this target */
+		if ((existingWinNum < MAX_AHB_TO_MBUS_WINS )&&
+			(existingWinNum != pAddrDecWin->winNum))
+		{
+			/* if we want to enable the new winow number
+			passed by the user , then the old one should
+			be disabled */
+			if (MV_TRUE == pAddrDecWin->enable)
+			{
+				/* be sure it is disabled */
+				mvAhbToMbusWinEnable(existingWinNum , MV_FALSE);
+			}
+		}
+
+        if (mvAhbToMbusWinSet(pAddrDecWin->winNum,&decWin) != MV_OK)
+		{
+			mvOsPrintf("mvCpuIfTargetWinSet: mvAhbToMbusWinSet Failed\n");
+			return MV_ERROR;
+		}
+
+	}
+
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvCpuIfTargetWinGet - Get CPU-to-peripheral target address window
+*
+* DESCRIPTION:
+*		Get the CPU peripheral target address window.
+*
+* INPUT:
+*       target - Peripheral target enumerator
+*
+* OUTPUT:
+*       pAddrDecWin - CPU target window information data structure.
+*
+* RETURN:
+*       MV_OK if target exist, MV_ERROR otherwise.
+*
+*******************************************************************************/
+MV_STATUS mvCpuIfTargetWinGet(MV_TARGET target, MV_CPU_DEC_WIN *pAddrDecWin)
+{
+
+	MV_U32 winNum=0xffffffff;
+	MV_AHB_TO_MBUS_DEC_WIN decWin;
+	MV_DRAM_DEC_WIN addrDecWin;
+
+	target = MV_CHANGE_BOOT_CS(target);
+
+	/* Check parameters */
+	if (target >= MAX_TARGETS)
+	{
+		mvOsPrintf("mvCpuIfTargetWinGet: target %d is Illigal\n", target);
+		return MV_ERROR;
+	}
+
+	if (MV_TARGET_IS_DRAM(target))
+	{
+		if (mvDramIfWinGet(target,&addrDecWin) != MV_OK)
+		{
+			mvOsPrintf("mvCpuIfTargetWinGet: Failed to get window target %d\n",
+					   target);
+			return MV_ERROR;
+		}
+
+		/* copy relevant data to MV_CPU_DEC_WIN structure */
+		pAddrDecWin->addrWin.baseLow = addrDecWin.addrWin.baseLow;
+		pAddrDecWin->addrWin.baseHigh = addrDecWin.addrWin.baseHigh;
+		pAddrDecWin->addrWin.size = addrDecWin.addrWin.size;
+		pAddrDecWin->enable = addrDecWin.enable;
+		pAddrDecWin->winNum = 0xffffffff;
+
+	}
+	else
+	{
+		/* get the Window number associated with this target */
+
+		winNum = mvAhbToMbusWinTargetGet(target);
+		if (winNum >= MAX_AHB_TO_MBUS_WINS)
+		{
+			return MV_NO_SUCH;
+
+		}
+
+		if (mvAhbToMbusWinGet(winNum , &decWin) != MV_OK)
+		{
+			mvOsPrintf("%s: mvAhbToMbusWinGet Failed at winNum = %d\n",
+					   __FUNCTION__, winNum);
+			return MV_ERROR;
+
+		}
+
+		/* copy relevant data to MV_CPU_DEC_WIN structure */
+		pAddrDecWin->addrWin.baseLow = decWin.addrWin.baseLow;
+		pAddrDecWin->addrWin.baseHigh = decWin.addrWin.baseHigh;
+		pAddrDecWin->addrWin.size = decWin.addrWin.size;
+		pAddrDecWin->enable = decWin.enable;
+		pAddrDecWin->winNum = winNum;
+
+	}
+
+
+
+
+	return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvCpuIfTargetWinEnable - Enable/disable a CPU address decode window
+*
+* DESCRIPTION:
+*       This function enable/disable a CPU address decode window.
+*       if parameter 'enable' == MV_TRUE the routine will enable the
+*       window, thus enabling CPU accesses (before enabling the window it is
+*       tested for overlapping). Otherwise, the window will be disabled.
+*
+* INPUT:
+*       target - Peripheral target enumerator.
+*       enable - Enable/disable parameter.
+*
+* OUTPUT:
+*       N/A
+*
+* RETURN:
+*       MV_ERROR if protection window number was wrong, or the window
+*       overlapps other target window.
+*
+*******************************************************************************/
+MV_STATUS mvCpuIfTargetWinEnable(MV_TARGET target,MV_BOOL enable)
+{
+	MV_U32 winNum, temp;
+	MV_CPU_DEC_WIN addrDecWin;
+
+	target = MV_CHANGE_BOOT_CS(target);
+	
+	/* Check parameters */
+	if (target >= MAX_TARGETS)
+	{
+		mvOsPrintf("mvCpuIfTargetWinEnable: target %d is Illigal\n", target);
+		return MV_ERROR;
+	}
+
+	/* get the window and check if it exist */
+	temp = mvCpuIfTargetWinGet(target, &addrDecWin);
+	if (MV_NO_SUCH == temp)
+	{
+		return (enable? MV_ERROR: MV_OK);
+	}
+	else if( MV_OK != temp)
+	{
+		mvOsPrintf("%s: ERR. Getting target %d failed.\n",__FUNCTION__, target);
+		return MV_ERROR;
+	}
+
+
+	/* check overlap */
+
+	if (MV_TRUE == enable)
+	{
+		if (MV_TRUE == cpuTargetWinOverlap(target, &addrDecWin.addrWin))
+		{
+			DB(mvOsPrintf("%s: ERR. Target %d overlap\n",__FUNCTION__, target));
+			return MV_ERROR;
+		}
+
+	}
+
+
+	if (MV_TARGET_IS_DRAM(target))
+	{
+		if (mvDramIfWinEnable(target , enable) != MV_OK)
+		{
+			mvOsPrintf("mvCpuIfTargetWinGet: mvDramIfWinEnable Failed at \n");
+			return MV_ERROR;
+
+		}
+
+	}
+	else
+	{
+		/* get the Window number associated with this target */
+
+		winNum = mvAhbToMbusWinTargetGet(target);
+
+		if (winNum >= MAX_AHB_TO_MBUS_WINS)
+		{
+			return (enable? MV_ERROR: MV_OK);
+		}
+
+		if (mvAhbToMbusWinEnable(winNum , enable) != MV_OK)
+		{
+			mvOsPrintf("mvCpuIfTargetWinGet: Failed to enable window = %d\n",
+					   winNum);
+			return MV_ERROR;
+
+		}
+
+	}
+
+	return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvCpuIfTargetWinSizeGet - Get CPU target address window size
+*
+* DESCRIPTION:
+*		Get the size of CPU-to-peripheral target window.
+*
+* INPUT:
+*       target - Peripheral target enumerator
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       32bit size. Function also returns '0' if window is closed.
+*		Function returns 0xFFFFFFFF in case of an error.
+*
+*******************************************************************************/
+MV_U32    mvCpuIfTargetWinSizeGet(MV_TARGET target)
+{
+	MV_CPU_DEC_WIN addrDecWin;
+
+	target = MV_CHANGE_BOOT_CS(target);
+
+	/* Check parameters */
+	if (target >= MAX_TARGETS)
+	{
+		mvOsPrintf("mvCpuIfTargetWinSizeGet: target %d is Illigal\n", target);
+		return 0;
+	}
+
+    /* Get the winNum window */
+	if (MV_OK != mvCpuIfTargetWinGet(target, &addrDecWin))
+	{
+		mvOsPrintf("mvCpuIfTargetWinSizeGet:ERR. Getting target %d failed.\n",
+                                                                        target);
+		return 0;
+	}
+
+	/* Check if window is enabled   */
+	if (addrDecWin.enable == MV_TRUE)
+    {
+		return (addrDecWin.addrWin.size);
+    }
+    else
+    {
+        return 0;		/* Window disabled. return 0 */
+    }
+}
+
+/*******************************************************************************
+* mvCpuIfTargetWinBaseLowGet - Get CPU target address window base low
+*
+* DESCRIPTION:
+*       CPU-to-peripheral target address window base is constructed of
+*       two parts: Low and high.
+*		This function gets the CPU peripheral target low base address.
+*
+* INPUT:
+*       target - Peripheral target enumerator
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       32bit low base address.
+*
+*******************************************************************************/
+MV_U32   mvCpuIfTargetWinBaseLowGet(MV_TARGET target)
+{
+	MV_CPU_DEC_WIN addrDecWin;
+
+	target = MV_CHANGE_BOOT_CS(target);
+
+	/* Check parameters */
+	if (target >= MAX_TARGETS)
+	{
+		mvOsPrintf("mvCpuIfTargetWinBaseLowGet: target %d is Illigal\n", target);
+		return 0xffffffff;
+	}
+
+    /* Get the target window */
+	if (MV_OK != mvCpuIfTargetWinGet(target, &addrDecWin))
+	{
+		mvOsPrintf("mvCpuIfTargetWinBaseLowGet:ERR. Getting target %d failed.\n",
+                                                                        target);
+		return 0xffffffff;
+	}
+
+	if (MV_FALSE == addrDecWin.enable)
+	{
+		return 0xffffffff;
+	}
+	return (addrDecWin.addrWin.baseLow);
+}
+
+/*******************************************************************************
+* mvCpuIfTargetWinBaseHighGet - Get CPU target address window base high
+*
+* DESCRIPTION:
+*       CPU-to-peripheral target address window base is constructed of
+*       two parts: Low and high.
+*		This function gets the CPU peripheral target high base address.
+*
+* INPUT:
+*       target - Peripheral target enumerator
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       32bit high base address.
+*
+*******************************************************************************/
+MV_U32    mvCpuIfTargetWinBaseHighGet(MV_TARGET target)
+{
+	MV_CPU_DEC_WIN addrDecWin;
+
+	target = MV_CHANGE_BOOT_CS(target);
+
+	/* Check parameters */
+	if (target >= MAX_TARGETS)
+	{
+		mvOsPrintf("mvCpuIfTargetWinBaseLowGet: target %d is Illigal\n", target);
+		return 0xffffffff;
+	}
+
+    /* Get the target window */
+	if (MV_OK != mvCpuIfTargetWinGet(target, &addrDecWin))
+	{
+		mvOsPrintf("mvCpuIfTargetWinBaseHighGet:ERR. Getting target %d failed.\n",
+                                                                        target);
+		return 0xffffffff;
+	}
+
+	if (MV_FALSE == addrDecWin.enable)
+	{
+		return 0;
+	}
+
+	return (addrDecWin.addrWin.baseHigh);
+}
+
+#if defined(MV_INCLUDE_PEX)
+/*******************************************************************************
+* mvCpuIfPexRemap - Set CPU remap register for address windows.
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       pexTarget   - Peripheral target enumerator. Must be a PEX target.
+*       pAddrDecWin - CPU target window information data structure.
+*                     Note that caller has to fill in the base field only. The
+*                     size field is ignored.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_ERROR if target is not a PEX one, MV_OK otherwise.
+*
+*******************************************************************************/
+MV_U32 mvCpuIfPexRemap(MV_TARGET pexTarget, MV_ADDR_WIN *pAddrDecWin)
+{
+	MV_U32 winNum;
+
+	/* Check parameters */
+
+	if (mvCtrlPexMaxIfGet() > 1)
+	{
+		if ((!MV_TARGET_IS_PEX1(pexTarget))&&(!MV_TARGET_IS_PEX0(pexTarget)))
+		{
+			mvOsPrintf("mvCpuIfPexRemap: target %d is Illigal\n",pexTarget);
+			return 0xffffffff;
+		}
+
+	}
+	else
+	{
+		if (!MV_TARGET_IS_PEX0(pexTarget))
+		{
+			mvOsPrintf("mvCpuIfPexRemap: target %d is Illigal\n",pexTarget);
+			return 0xffffffff;
+		}
+
+	}
+
+	/* get the Window number associated with this target */
+	winNum = mvAhbToMbusWinTargetGet(pexTarget);
+
+	if (winNum >= MAX_AHB_TO_MBUS_WINS)
+	{
+		mvOsPrintf("mvCpuIfPexRemap: mvAhbToMbusWinTargetGet Failed\n");
+		return 0xffffffff;
+
+	}
+
+	return mvAhbToMbusWinRemap(winNum , pAddrDecWin);
+}
+
+#endif
+
+#if defined(MV_INCLUDE_PCI)
+/*******************************************************************************
+* mvCpuIfPciRemap - Set CPU remap register for address windows.
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       pciTarget   - Peripheral target enumerator. Must be a PCI target.
+*       pAddrDecWin - CPU target window information data structure.
+*                     Note that caller has to fill in the base field only. The
+*                     size field is ignored.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_ERROR if target is not a PCI one, MV_OK otherwise.
+*
+*******************************************************************************/
+MV_U32 mvCpuIfPciRemap(MV_TARGET pciTarget, MV_ADDR_WIN *pAddrDecWin)
+{
+	MV_U32 winNum;
+
+	/* Check parameters */
+	if (!MV_TARGET_IS_PCI(pciTarget))
+	{
+		mvOsPrintf("mvCpuIfPciRemap: target %d is Illigal\n",pciTarget);
+		return 0xffffffff;
+	}
+
+	/* get the Window number associated with this target */
+	winNum = mvAhbToMbusWinTargetGet(pciTarget);
+
+	if (winNum >= MAX_AHB_TO_MBUS_WINS)
+	{
+		mvOsPrintf("mvCpuIfPciRemap: mvAhbToMbusWinTargetGet Failed\n");
+		return 0xffffffff;
+
+	}
+
+	return mvAhbToMbusWinRemap(winNum , pAddrDecWin);
+}
+#endif /* MV_INCLUDE_PCI */
+
+
+/*******************************************************************************
+* mvCpuIfPciIfRemap - Set CPU remap register for address windows.
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       pciTarget   - Peripheral target enumerator. Must be a PCI target.
+*       pAddrDecWin - CPU target window information data structure.
+*                     Note that caller has to fill in the base field only. The
+*                     size field is ignored.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_ERROR if target is not a PCI one, MV_OK otherwise.
+*
+*******************************************************************************/
+MV_U32 mvCpuIfPciIfRemap(MV_TARGET pciIfTarget, MV_ADDR_WIN *pAddrDecWin)
+{
+#if defined(MV_INCLUDE_PEX)
+	if (MV_TARGET_IS_PEX(pciIfTarget))
+	{
+		return mvCpuIfPexRemap(pciIfTarget,pAddrDecWin);
+	}
+#endif
+#if defined(MV_INCLUDE_PCI)
+
+	if (MV_TARGET_IS_PCI(pciIfTarget))
+	{
+		return mvCpuIfPciRemap(pciIfTarget,pAddrDecWin);
+	}
+#endif
+	return 0;
+}
+
+
+
+/*******************************************************************************
+* mvCpuIfTargetOfBaseAddressGet - Get the target according to base address
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       baseAddress -  base address to be checked
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       the target number that baseAddress belongs to or MAX_TARGETS is not
+*       found
+*
+*******************************************************************************/
+
+MV_TARGET mvCpuIfTargetOfBaseAddressGet(MV_U32 baseAddress)
+{
+	MV_CPU_DEC_WIN win;
+	MV_U32 target;
+
+	for( target = 0; target < MAX_TARGETS; target++ )
+	{
+		if( mvCpuIfTargetWinGet( target, &win ) == MV_OK )
+		{
+			if( win.enable )
+			{
+				if ((baseAddress >= win.addrWin.baseLow) &&
+					(baseAddress < win.addrWin.baseLow + win.addrWin.size)) break;
+            }
+		}
+		else return MAX_TARGETS;
+
+	}
+
+	return target;
+}
+/*******************************************************************************
+* cpuTargetWinOverlap - Detect CPU address decode windows overlapping
+*
+* DESCRIPTION:
+*       An unpredicted behaviur is expected in case CPU address decode
+*       windows overlapps.
+*       This function detects CPU address decode windows overlapping of a
+*       specified target. The function does not check the target itself for
+*       overlapping. The function also skipps disabled address decode windows.
+*
+* INPUT:
+*       target      - Peripheral target enumerator.
+*       pAddrDecWin - An address decode window struct.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_TRUE if the given address window overlaps current address
+*       decode map, MV_FALSE otherwise.
+*
+*******************************************************************************/
+static MV_BOOL cpuTargetWinOverlap(MV_TARGET target, MV_ADDR_WIN *pAddrWin)
+{
+    MV_U32 			targetNum;
+    MV_CPU_DEC_WIN 	addrDecWin;
+	MV_STATUS		status;
+
+
+	for(targetNum = 0; targetNum < MAX_TARGETS; targetNum++)
+    {
+#if defined(MV_RUN_FROM_FLASH)
+		if(MV_TARGET_IS_AS_BOOT(target))
+		{
+			if (MV_CHANGE_BOOT_CS(targetNum) == target)
+				continue;
+		}
+#endif /* MV_RUN_FROM_FLASH */
+
+		/* don't check our target or illegal targets */
+        if (targetNum == target)
+        {
+            continue;
+        }
+
+		/* Get window parameters 	*/
+		status = mvCpuIfTargetWinGet(targetNum, &addrDecWin);
+        if(MV_NO_SUCH == status)
+        {
+            continue;
+        }
+		if(MV_OK != status)
+		{
+			DB(mvOsPrintf("cpuTargetWinOverlap: ERR. TargetWinGet failed\n"));
+            return MV_TRUE;
+		}
+
+		/* Do not check disabled windows	*/
+		if (MV_FALSE == addrDecWin.enable)
+		{
+			continue;
+		}
+
+        if(MV_TRUE == ctrlWinOverlapTest(pAddrWin, &addrDecWin.addrWin))
+		{
+			DB(mvOsPrintf(
+			"cpuTargetWinOverlap: Required target %d overlap current %d\n",
+								target, targetNum));
+			return MV_TRUE;
+		}
+    }
+
+	return MV_FALSE;
+
+}
+
+/*******************************************************************************
+* mvCpuIfAddDecShow - Print the CPU address decode map.
+*
+* DESCRIPTION:
+*		This function print the CPU address decode map.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+MV_VOID mvCpuIfAddDecShow(MV_VOID)
+{
+	MV_CPU_DEC_WIN win;
+	MV_U32 target;
+	mvOsOutput( "\n" );
+	mvOsOutput( "CPU Interface\n" );
+	mvOsOutput( "-------------\n" );
+
+	for( target = 0; target < MAX_TARGETS; target++ )
+	{
+
+		memset( &win, 0, sizeof(MV_CPU_DEC_WIN) );
+
+		mvOsOutput( "%s ",mvCtrlTargetNameGet(target));
+		mvOsOutput( "...." );
+
+		if( mvCpuIfTargetWinGet( target, &win ) == MV_OK )
+		{
+			if( win.enable )
+			{
+				mvOsOutput( "base %08x, ", win.addrWin.baseLow );
+				mvSizePrint( win.addrWin.size );
+				mvOsOutput( "\n" );
+
+            }
+			else
+				mvOsOutput( "disable\n" );
+		}
+		else if( mvCpuIfTargetWinGet( target, &win ) == MV_NO_SUCH )
+		{
+				mvOsOutput( "no such\n" );
+		}
+	}
+}
+
+/*******************************************************************************
+* mvCpuIfEnablePex - Enable PCI Express.
+*
+* DESCRIPTION:
+*		This function Enable PCI Express.
+*
+* INPUT:
+*       pexIf   -  PEX interface number.
+*       pexType -  MV_PEX_ROOT_COMPLEX - root complex device
+*		   MV_PEX_END_POINT - end point device
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+#if defined(MV_INCLUDE_PEX)
+MV_VOID mvCpuIfEnablePex(MV_U32 pexIf, MV_PEX_TYPE pexType)
+{
+	/* Set pex mode incase S@R not exist */
+	if( pexType == MV_PEX_END_POINT)
+	{
+		MV_REG_BIT_RESET(PEX_CTRL_REG(pexIf),PXCR_DEV_TYPE_CTRL_MASK);
+		/* Change pex mode in capability reg */
+		MV_REG_BIT_RESET(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_CAPABILITY_REG), BIT22);
+		MV_REG_BIT_SET(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_CAPABILITY_REG), BIT20);
+
+	}
+	else
+	{	
+		MV_REG_BIT_SET(PEX_CTRL_REG(pexIf),PXCR_DEV_TYPE_CTRL_MASK);
+	}
+
+	/* CPU config register Pex enable */
+	MV_REG_BIT_SET(CPU_CTRL_STAT_REG,CCSR_PCI_ACCESS_MASK);
+}
+#endif
+
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIf.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIf.h
new file mode 100644
index 0000000000..224ed07f59
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIf.h
@@ -0,0 +1,120 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvCpuIfh
+#define __INCmvCpuIfh
+
+/* includes */
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "ctrlEnv/sys/mvCpuIfRegs.h"
+#include "ctrlEnv/sys/mvAhbToMbus.h"
+#include "ddr2/mvDramIf.h"
+#include "ctrlEnv/sys/mvSysDram.h"
+#if defined(MV_INCLUDE_PEX)
+#include "pex/mvPex.h"
+#endif
+
+/* defines  */
+
+/* typedefs */
+/* This structure describes CPU interface address decode window               */
+typedef struct _mvCpuIfDecWin 
+{
+	MV_ADDR_WIN   addrWin;    /* An address window*/
+	MV_U32		  winNum;	  /* Window Number in the AHB To Mbus bridge */
+	MV_BOOL       enable;     /* Address decode window is enabled/disabled    */
+
+}MV_CPU_DEC_WIN;
+
+
+
+/* mvCpuIfLib.h API list */
+
+/* mvCpuIfLib.h API list */
+
+MV_STATUS mvCpuIfInit(MV_CPU_DEC_WIN *cpuAddrWinMap);
+MV_STATUS mvCpuIfTargetWinSet(MV_TARGET target, MV_CPU_DEC_WIN *pAddrDecWin);
+MV_STATUS mvCpuIfTargetWinGet(MV_TARGET target, MV_CPU_DEC_WIN *pAddrDecWin);
+MV_STATUS mvCpuIfTargetWinEnable(MV_TARGET target,MV_BOOL enable);
+MV_U32    mvCpuIfTargetWinSizeGet(MV_TARGET target);
+MV_U32    mvCpuIfTargetWinBaseLowGet(MV_TARGET target);
+MV_U32    mvCpuIfTargetWinBaseHighGet(MV_TARGET target);
+MV_TARGET mvCpuIfTargetOfBaseAddressGet(MV_U32 baseAddress);
+#if defined(MV_INCLUDE_PEX)
+MV_U32    mvCpuIfPexRemap(MV_TARGET pexTarget, MV_ADDR_WIN *pAddrDecWin);
+MV_VOID   mvCpuIfEnablePex(MV_U32 pexIf, MV_PEX_TYPE pexType);
+#endif
+#if defined(MV_INCLUDE_PCI)
+MV_U32    mvCpuIfPciRemap(MV_TARGET pciTarget, MV_ADDR_WIN *pAddrDecWin);
+#endif                                               
+MV_U32 	  mvCpuIfPciIfRemap(MV_TARGET pciTarget, MV_ADDR_WIN *pAddrDecWin);
+
+MV_VOID   mvCpuIfAddDecShow(MV_VOID);
+
+#if defined(MV88F6281)
+MV_STATUS mvCpuIfBridgeReorderWAInit(void);
+#endif
+
+#endif /* __INCmvCpuIfh */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIfRegs.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIfRegs.h
new file mode 100644
index 0000000000..8cfeee2db0
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIfRegs.h
@@ -0,0 +1,304 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvCpuIfRegsh
+#define __INCmvCpuIfRegsh
+
+/****************************************/
+/* ARM Control and Status Registers Map */
+/****************************************/
+
+#define CPU_CONFIG_REG				0x20100
+#define CPU_CTRL_STAT_REG			0x20104
+#define CPU_RSTOUTN_MASK_REG			0x20108
+#define CPU_SYS_SOFT_RST_REG			0x2010C
+#define CPU_AHB_MBUS_CAUSE_INT_REG		0x20110
+#define CPU_AHB_MBUS_MASK_INT_REG		0x20114
+#define CPU_FTDLL_CONFIG_REG			0x20120
+#define CPU_L2_CONFIG_REG			0x20128
+
+
+
+/* ARM Configuration register */
+/* CPU_CONFIG_REG (CCR) */
+
+
+/* Reset vector location */
+#define CCR_VEC_INIT_LOC_OFFS			1
+#define CCR_VEC_INIT_LOC_MASK			BIT1
+/* reset at 0x00000000 */
+#define CCR_VEC_INIT_LOC_0000			(0 << CCR_VEC_INIT_LOC_OFFS)
+/* reset at 0xFFFF0000 */
+#define CCR_VEC_INIT_LOC_FF00			(1 << CCR_VEC_INIT_LOC_OFFS)
+
+
+#define CCR_AHB_ERROR_PROP_OFFS			2
+#define CCR_AHB_ERROR_PROP_MASK			BIT2
+/* Erros are not propogated to AHB */
+#define CCR_AHB_ERROR_PROP_NO_INDICATE		(0 << CCR_AHB_ERROR_PROP_OFFS)
+/* Erros are propogated to AHB */
+#define CCR_AHB_ERROR_PROP_INDICATE		(1 << CCR_AHB_ERROR_PROP_OFFS)
+
+
+#define CCR_ENDIAN_INIT_OFFS			3
+#define CCR_ENDIAN_INIT_MASK			BIT3
+#define CCR_ENDIAN_INIT_LITTLE			(0 << CCR_ENDIAN_INIT_OFFS)
+#define CCR_ENDIAN_INIT_BIG			(1 << CCR_ENDIAN_INIT_OFFS)
+
+
+#define CCR_INCR_EN_OFFS			4
+#define CCR_INCR_EN_MASK			BIT4
+#define CCR_INCR_EN				BIT4
+
+
+#define CCR_NCB_BLOCKING_OFFS			5			
+#define CCR_NCB_BLOCKING_MASK			(1 << CCR_NCB_BLOCKING_OFFS)
+#define CCR_NCB_BLOCKING_NON			(0 << CCR_NCB_BLOCKING_OFFS)
+#define CCR_NCB_BLOCKING_EN			(1 << CCR_NCB_BLOCKING_OFFS)
+
+#define CCR_CPU_2_MBUSL_TICK_DRV_OFFS		8
+#define CCR_CPU_2_MBUSL_TICK_DRV_MASK		(0xF << CCR_CPU_2_MBUSL_TICK_DRV_OFFS)
+#define CCR_CPU_2_MBUSL_TICK_SMPL_OFFS		12
+#define CCR_CPU_2_MBUSL_TICK_SMPL_MASK		(0xF << CCR_CPU_2_MBUSL_TICK_SMPL_OFFS)
+#define CCR_ICACH_PREF_BUF_ENABLE		BIT16
+#define CCR_DCACH_PREF_BUF_ENABLE		BIT17
+
+/* Ratio options for CPU to DDR for 6281/6192/6190 */
+#define CPU_2_DDR_CLK_1x3	    4
+#define CPU_2_DDR_CLK_1x4	    6
+
+/* Ratio options for CPU to DDR for 6281 only */
+#define CPU_2_DDR_CLK_2x9	    7
+#define CPU_2_DDR_CLK_1x5	    8
+#define CPU_2_DDR_CLK_1x6	    9
+
+/* Ratio options for CPU to DDR for 6180 only */
+#define CPU_2_DDR_CLK_1x3_1	    0x5
+#define CPU_2_DDR_CLK_1x4_1	    0x6
+
+/* Default values for CPU to Mbus-L DDR Interface Tick Driver and 	*/
+/* CPU to Mbus-L Tick Sample fields in CPU config register		*/
+
+#define TICK_DRV_1x1	0
+#define TICK_DRV_1x2	0
+#define TICK_DRV_1x3	1
+#define TICK_DRV_1x4	2
+#define TICK_SMPL_1x1	0
+#define TICK_SMPL_1x2	1
+#define TICK_SMPL_1x3	0
+#define TICK_SMPL_1x4	0
+
+#define CPU_2_MBUSL_DDR_CLK_1x2						\
+		 ((TICK_DRV_1x2  << CCR_CPU_2_MBUSL_TICK_DRV_OFFS) | 	\
+		  (TICK_SMPL_1x2 << CCR_CPU_2_MBUSL_TICK_SMPL_OFFS))
+#define CPU_2_MBUSL_DDR_CLK_1x3						\
+		 ((TICK_DRV_1x3  << CCR_CPU_2_MBUSL_TICK_DRV_OFFS) | 	\
+		  (TICK_SMPL_1x3 << CCR_CPU_2_MBUSL_TICK_SMPL_OFFS))
+#define CPU_2_MBUSL_DDR_CLK_1x4						\
+		 ((TICK_DRV_1x4  << CCR_CPU_2_MBUSL_TICK_DRV_OFFS) | 	\
+		  (TICK_SMPL_1x4 << CCR_CPU_2_MBUSL_TICK_SMPL_OFFS))
+
+/* ARM Control and Status register */
+/* CPU_CTRL_STAT_REG (CCSR) */
+
+
+/*
+This is used to block PCI express\PCI from access Socrates/Feroceon GP
+while ARM boot is still in progress
+*/
+
+#define CCSR_PCI_ACCESS_OFFS			0
+#define CCSR_PCI_ACCESS_MASK			BIT0
+#define CCSR_PCI_ACCESS_ENABLE			(0 << CCSR_PCI_ACCESS_OFFS)
+#define CCSR_PCI_ACCESS_DISBALE			(1 << CCSR_PCI_ACCESS_OFFS)
+
+#define CCSR_ARM_RESET				BIT1
+#define CCSR_SELF_INT				BIT2
+#define CCSR_BIG_ENDIAN				BIT15
+
+
+/* RSTOUTn Mask Register */
+/* CPU_RSTOUTN_MASK_REG (CRMR) */
+
+#define CRMR_PEX_RST_OUT_OFFS			0
+#define CRMR_PEX_RST_OUT_MASK			BIT0
+#define CRMR_PEX_RST_OUT_ENABLE			(1 << CRMR_PEX_RST_OUT_OFFS)
+#define CRMR_PEX_RST_OUT_DISABLE		(0 << CRMR_PEX_RST_OUT_OFFS)
+
+#define CRMR_WD_RST_OUT_OFFS			1
+#define CRMR_WD_RST_OUT_MASK			BIT1
+#define CRMR_WD_RST_OUT_ENABLE			(1 << CRMR_WD_RST_OUT_OFFS)
+#define CRMR_WD_RST_OUT_DISBALE			(0 << CRMR_WD_RST_OUT_OFFS)			
+
+#define CRMR_SOFT_RST_OUT_OFFS			2
+#define CRMR_SOFT_RST_OUT_MASK			BIT2
+#define CRMR_SOFT_RST_OUT_ENABLE		(1 << CRMR_SOFT_RST_OUT_OFFS)
+#define CRMR_SOFT_RST_OUT_DISBALE		(0 << CRMR_SOFT_RST_OUT_OFFS)
+
+/* System Software Reset Register */
+/* CPU_SYS_SOFT_RST_REG (CSSRR) */
+
+#define CSSRR_SYSTEM_SOFT_RST			BIT0
+
+/* AHB to Mbus Bridge Interrupt Cause Register*/
+/* CPU_AHB_MBUS_CAUSE_INT_REG (CAMCIR) */
+
+#define CAMCIR_ARM_SELF_INT			BIT0
+#define CAMCIR_ARM_TIMER0_INT_REQ		BIT1
+#define CAMCIR_ARM_TIMER1_INT_REQ		BIT2
+#define CAMCIR_ARM_WD_TIMER_INT_REQ		BIT3
+
+
+/* AHB to Mbus Bridge Interrupt Mask Register*/
+/* CPU_AHB_MBUS_MASK_INT_REG (CAMMIR) */
+
+#define CAMCIR_ARM_SELF_INT_OFFS		0
+#define CAMCIR_ARM_SELF_INT_MASK		BIT0
+#define CAMCIR_ARM_SELF_INT_EN			(1 << CAMCIR_ARM_SELF_INT_OFFS)
+#define CAMCIR_ARM_SELF_INT_DIS			(0 << CAMCIR_ARM_SELF_INT_OFFS)
+
+
+#define CAMCIR_ARM_TIMER0_INT_REQ_OFFS		1
+#define CAMCIR_ARM_TIMER0_INT_REQ_MASK		BIT1
+#define CAMCIR_ARM_TIMER0_INT_REQ_EN		(1 << CAMCIR_ARM_TIMER0_INT_REQ_OFFS) 
+#define CAMCIR_ARM_TIMER0_INT_REQ_DIS		(0 << CAMCIR_ARM_TIMER0_INT_REQ_OFFS)
+
+#define CAMCIR_ARM_TIMER1_INT_REQ_OFFS		2
+#define CAMCIR_ARM_TIMER1_INT_REQ_MASK		BIT2
+#define CAMCIR_ARM_TIMER1_INT_REQ_EN		(1 << CAMCIR_ARM_TIMER1_INT_REQ_OFFS) 
+#define CAMCIR_ARM_TIMER1_INT_REQ_DIS		(0 << CAMCIR_ARM_TIMER1_INT_REQ_OFFS) 
+
+#define CAMCIR_ARM_WD_TIMER_INT_REQ_OFFS 	3
+#define CAMCIR_ARM_WD_TIMER_INT_REQ_MASK 	BIT3
+#define CAMCIR_ARM_WD_TIMER_INT_REQ_EN	 	(1 << CAMCIR_ARM_WD_TIMER_INT_REQ_OFFS) 
+#define CAMCIR_ARM_WD_TIMER_INT_REQ_DIS	 	(0 << CAMCIR_ARM_WD_TIMER_INT_REQ_OFFS) 
+
+/* CPU FTDLL Config register (CFCR) fields */
+#define CFCR_FTDLL_ICACHE_TAG_OFFS		0
+#define CFCR_FTDLL_ICACHE_TAG_MASK		(0x7F << CFCR_FTDLL_ICACHE_TAG_OFFS)
+#define CFCR_FTDLL_DCACHE_TAG_OFFS		8
+#define CFCR_FTDLL_DCACHE_TAG_MASK		(0x7F << CFCR_FTDLL_DCACHE_TAG_OFFS)
+#define CFCR_FTDLL_OVERWRITE_ENABLE		(1 << 15)
+/* For Orion 2 D2 only */
+#define CFCR_MRVL_CPU_ID_OFFS			16
+#define CFCR_MRVL_CPU_ID_MASK			(0x1 << CFCR_MRVL_CPU_ID_OFFS)
+#define CFCR_ARM_CPU_ID				(0x0 << CFCR_MRVL_CPU_ID_OFFS)
+#define CFCR_MRVL_CPU_ID			(0x1 << CFCR_MRVL_CPU_ID_OFFS)
+#define CFCR_VFP_SUB_ARC_NUM_OFFS		7
+#define CFCR_VFP_SUB_ARC_NUM_MASK		(0x1 << CFCR_VFP_SUB_ARC_NUM_OFFS)
+#define CFCR_VFP_SUB_ARC_NUM_1			(0x0 << CFCR_VFP_SUB_ARC_NUM_OFFS)
+#define CFCR_VFP_SUB_ARC_NUM_2			(0x1 << CFCR_VFP_SUB_ARC_NUM_OFFS)
+
+/* CPU_L2_CONFIG_REG fields */
+#ifdef MV_CPU_LE
+#define CL2CR_L2_ECC_EN_OFFS			2
+#define CL2CR_L2_WT_MODE_OFFS			4
+#else
+#define CL2CR_L2_ECC_EN_OFFS			26
+#define CL2CR_L2_WT_MODE_OFFS			28
+#endif
+
+#define CL2CR_L2_ECC_EN_MASK			(1 << CL2CR_L2_ECC_EN_OFFS)
+#define CL2CR_L2_WT_MODE_MASK			(1 << CL2CR_L2_WT_MODE_OFFS)
+
+/*******************************************/
+/* Main Interrupt Controller Registers Map */
+/*******************************************/
+
+#define CPU_MAIN_INT_CAUSE_REG			0x20200
+#define CPU_MAIN_IRQ_MASK_REG			0x20204
+#define CPU_MAIN_FIQ_MASK_REG			0x20208
+#define CPU_ENPOINT_MASK_REG			0x2020C
+#define CPU_MAIN_INT_CAUSE_HIGH_REG		0x20210
+#define CPU_MAIN_IRQ_MASK_HIGH_REG		0x20214
+#define CPU_MAIN_FIQ_MASK_HIGH_REG		0x20218
+#define CPU_ENPOINT_MASK_HIGH_REG		0x2021C
+
+
+/*******************************************/
+/* ARM Doorbell Registers Map		   */
+/*******************************************/
+
+#define CPU_HOST_TO_ARM_DRBL_REG		0x20400
+#define CPU_HOST_TO_ARM_MASK_REG		0x20404
+#define CPU_ARM_TO_HOST_DRBL_REG		0x20408
+#define CPU_ARM_TO_HOST_MASK_REG		0x2040C
+
+
+
+/* CPU control register map */
+/* Set bits means value is about to change according to new value */
+#define CPU_CONFIG_DEFAULT_MASK         	(CCR_VEC_INIT_LOC_MASK  | CCR_AHB_ERROR_PROP_MASK)      
+
+#define CPU_CONFIG_DEFAULT                      (CCR_VEC_INIT_LOC_FF00)
+                 
+/* CPU Control and status defaults */
+#define CPU_CTRL_STAT_DEFAULT_MASK              (CCSR_PCI_ACCESS_MASK)
+                                                                        
+
+#define CPU_CTRL_STAT_DEFAULT                   (CCSR_PCI_ACCESS_ENABLE)
+
+#endif /* __INCmvCpuIfRegsh */
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysAudio.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysAudio.c
new file mode 100644
index 0000000000..769475f8f4
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysAudio.c
@@ -0,0 +1,324 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+#include "mvSysAudio.h"
+
+/*******************************************************************************
+* mvAudioWinSet - Set AUDIO target address window
+*
+* DESCRIPTION:
+*       This function sets a peripheral target (e.g. SDRAM bank0, PCI_MEM0) 
+*       address window, also known as address decode window. 
+*       After setting this target window, the AUDIO will be able to access the 
+*       target within the address window. 
+*
+* INPUT:
+*       winNum      - AUDIO target address decode window number.
+*       pAddrDecWin - AUDIO target window data structure.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_ERROR if address window overlapps with other address decode windows.
+*       MV_BAD_PARAM if base address is invalid parameter or target is 
+*       unknown.
+*
+*******************************************************************************/
+MV_STATUS mvAudioWinSet(MV_U32 winNum, MV_AUDIO_DEC_WIN *pAddrDecWin)
+{
+    MV_TARGET_ATTRIB    targetAttribs;
+    MV_DEC_REGS         decRegs;
+
+    /* Parameter checking   */
+    if (winNum >= MV_AUDIO_MAX_ADDR_DECODE_WIN)
+    {
+        mvOsPrintf("%s: ERR. Invalid win num %d\n",__FUNCTION__, winNum);
+        return MV_BAD_PARAM;
+    }
+    
+    /* check if address is aligned to the size */
+    if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size))
+    {
+		mvOsPrintf("mvAudioWinSet:Error setting AUDIO window %d to "\
+			   "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n",
+			   winNum,
+			   mvCtrlTargetNameGet(pAddrDecWin->target), 
+			   pAddrDecWin->addrWin.baseLow,
+			   pAddrDecWin->addrWin.size);
+		return MV_ERROR;
+    }
+
+    decRegs.baseReg = 0;
+    decRegs.sizeReg = 0;
+
+    if (MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs))
+    {
+        mvOsPrintf("%s: mvCtrlAddrDecToReg Failed\n", __FUNCTION__);
+        return MV_ERROR;
+    }
+
+    mvCtrlAttribGet(pAddrDecWin->target, &targetAttribs);
+                                                                                                                         
+    /* set attributes */
+    decRegs.sizeReg &= ~MV_AUDIO_WIN_ATTR_MASK;
+    decRegs.sizeReg |= (targetAttribs.attrib << MV_AUDIO_WIN_ATTR_OFFSET);
+
+    /* set target ID */
+    decRegs.sizeReg &= ~MV_AUDIO_WIN_TARGET_MASK;
+    decRegs.sizeReg |= (targetAttribs.targetId << MV_AUDIO_WIN_TARGET_OFFSET);
+
+    if (pAddrDecWin->enable == MV_TRUE)
+    {
+        decRegs.sizeReg |= MV_AUDIO_WIN_ENABLE_MASK;
+    }
+    else
+    {
+        decRegs.sizeReg &= ~MV_AUDIO_WIN_ENABLE_MASK;
+    }
+
+    MV_REG_WRITE( MV_AUDIO_WIN_CTRL_REG(winNum), decRegs.sizeReg);
+    MV_REG_WRITE( MV_AUDIO_WIN_BASE_REG(winNum), decRegs.baseReg);
+    
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvAudioWinGet - Get AUDIO peripheral target address window.
+*
+* DESCRIPTION:
+*       Get AUDIO peripheral target address window.
+*
+* INPUT:
+*       winNum - AUDIO target address decode window number.
+*
+* OUTPUT:
+*       pAddrDecWin - AUDIO target window data structure.
+*
+* RETURN:
+*       MV_ERROR if register parameters are invalid.
+*
+*******************************************************************************/
+MV_STATUS mvAudioWinGet(MV_U32 winNum, MV_AUDIO_DEC_WIN *pAddrDecWin)
+{
+    MV_DEC_REGS         decRegs;
+    MV_TARGET_ATTRIB    targetAttrib;
+                                                                                                                         
+    /* Parameter checking   */
+    if (winNum >= MV_AUDIO_MAX_ADDR_DECODE_WIN)
+    {
+        mvOsPrintf("%s : ERR. Invalid winNum %d\n", 
+                    __FUNCTION__,  winNum);
+        return MV_NOT_SUPPORTED;
+    }
+
+    decRegs.baseReg = MV_REG_READ( MV_AUDIO_WIN_BASE_REG(winNum) );
+    decRegs.sizeReg = MV_REG_READ( MV_AUDIO_WIN_CTRL_REG(winNum) );
+ 
+    if (MV_OK != mvCtrlRegToAddrDec(&decRegs, &pAddrDecWin->addrWin) )
+    {
+        mvOsPrintf("%s: mvCtrlRegToAddrDec Failed\n", __FUNCTION__);
+        return MV_ERROR; 
+    }
+       
+    /* attrib and targetId */
+    targetAttrib.attrib = (decRegs.sizeReg & MV_AUDIO_WIN_ATTR_MASK) >> 
+		MV_AUDIO_WIN_ATTR_OFFSET;
+    targetAttrib.targetId = (decRegs.sizeReg & MV_AUDIO_WIN_TARGET_MASK) >> 
+		MV_AUDIO_WIN_TARGET_OFFSET;
+ 
+    pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib);
+
+    /* Check if window is enabled   */
+    if(decRegs.sizeReg & MV_AUDIO_WIN_ENABLE_MASK) 
+    {
+        pAddrDecWin->enable = MV_TRUE;
+    }
+    else
+    {
+        pAddrDecWin->enable = MV_FALSE;
+    }
+    return MV_OK;
+}
+/*******************************************************************************
+* mvAudioAddrDecShow - Print the AUDIO address decode map.
+*
+* DESCRIPTION:
+*		This function print the AUDIO address decode map.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+MV_VOID mvAudioAddrDecShow(MV_VOID)
+{
+
+	MV_AUDIO_DEC_WIN win;
+	int i;
+
+	if (MV_FALSE == mvCtrlPwrClckGet(AUDIO_UNIT_ID, 0)) 
+		return;
+
+
+	mvOsOutput( "\n" );
+	mvOsOutput( "AUDIO:\n" );
+	mvOsOutput( "----\n" );
+
+	for( i = 0; i < MV_AUDIO_MAX_ADDR_DECODE_WIN; i++ )
+	{
+            memset( &win, 0, sizeof(MV_AUDIO_DEC_WIN) );
+
+	    mvOsOutput( "win%d - ", i );
+
+	    if( mvAudioWinGet( i, &win ) == MV_OK )
+	    {
+	        if( win.enable )
+	        {
+                    mvOsOutput( "%s base %08x, ",
+                    mvCtrlTargetNameGet(win.target), win.addrWin.baseLow );
+                    mvOsOutput( "...." );
+
+                    mvSizePrint( win.addrWin.size );
+    
+		    mvOsOutput( "\n" );
+                }
+		else
+		mvOsOutput( "disable\n" );
+	    }
+	}
+}
+
+
+/*******************************************************************************
+* mvAudioWinInit - Initialize the integrated AUDIO target address window.
+*
+* DESCRIPTION:
+*       Initialize the AUDIO peripheral target address window.
+*
+* INPUT:
+*
+*
+* OUTPUT:
+*     
+*
+* RETURN:
+*       MV_ERROR if register parameters are invalid.
+*
+*******************************************************************************/
+MV_STATUS mvAudioInit(MV_VOID)
+{
+    int             winNum;
+    MV_AUDIO_DEC_WIN  audioWin;
+    MV_CPU_DEC_WIN  cpuAddrDecWin;
+    MV_U32          status;
+
+    mvAudioHalInit();
+
+    /* Initiate Audio address decode */
+
+    /* First disable all address decode windows */
+    for(winNum = 0; winNum < MV_AUDIO_MAX_ADDR_DECODE_WIN; winNum++)
+    {
+        MV_U32  regVal = MV_REG_READ(MV_AUDIO_WIN_CTRL_REG(winNum));
+        regVal &= ~MV_AUDIO_WIN_ENABLE_MASK;
+        MV_REG_WRITE(MV_AUDIO_WIN_CTRL_REG(winNum), regVal);
+    }
+
+    for(winNum = 0; winNum < MV_AUDIO_MAX_ADDR_DECODE_WIN; winNum++)
+    {
+
+		/* We will set the Window to DRAM_CS0 in default */
+		/* first get attributes from CPU If */
+		status = mvCpuIfTargetWinGet(SDRAM_CS0,
+									 &cpuAddrDecWin);
+	
+		if (MV_OK != status)
+		{
+				mvOsPrintf("%s: ERR. mvCpuIfTargetWinGet failed\n", __FUNCTION__);
+			return MV_ERROR;
+		}
+	
+		if (cpuAddrDecWin.enable == MV_TRUE)
+		{
+			audioWin.addrWin.baseHigh = cpuAddrDecWin.addrWin.baseHigh;
+			audioWin.addrWin.baseLow  = cpuAddrDecWin.addrWin.baseLow;
+			audioWin.addrWin.size     = cpuAddrDecWin.addrWin.size;
+			audioWin.enable           = MV_TRUE;
+			audioWin.target           = SDRAM_CS0;
+	
+			if(MV_OK != mvAudioWinSet(winNum, &audioWin))
+			{
+				return MV_ERROR;
+			}
+		}
+	}
+
+    return MV_OK;
+}
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysAudio.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysAudio.h
new file mode 100644
index 0000000000..f59eb9a904
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysAudio.h
@@ -0,0 +1,123 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+#ifndef __INCMVSysAudioH
+#define __INCMVSysAudioH
+
+#include "mvCommon.h"
+#include "audio/mvAudio.h"
+#include "ctrlEnv/mvCtrlEnvSpec.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+
+/***********************************/
+/* Audio Address Decoding registers*/
+/***********************************/
+
+#define MV_AUDIO_MAX_ADDR_DECODE_WIN 		2
+#define MV_AUDIO_RECORD_WIN_NUM			0
+#define MV_AUDIO_PLAYBACK_WIN_NUM		1
+
+#define MV_AUDIO_WIN_CTRL_REG(win)        (AUDIO_REG_BASE + 0xA04 + ((win)<<3))
+#define MV_AUDIO_WIN_BASE_REG(win)        (AUDIO_REG_BASE + 0xA00 + ((win)<<3))
+
+#define MV_AUDIO_RECORD_WIN_CTRL_REG		MV_AUDIO_WIN_CTRL_REG(MV_AUDIO_RECORD_WIN_NUM)
+#define MV_AUDIO_RECORD_WIN_BASE_REG		MV_AUDIO_WIN_BASE_REG(MV_AUDIO_RECORD_WIN_NUM)
+#define MV_AUDIO_PLAYBACK_WIN_CTRL_REG		MV_AUDIO_WIN_CTRL_REG(MV_AUDIO_PLAYBACK_WIN_NUM)
+#define MV_AUDIO_PLAYBACK_WIN_BASE_REG		MV_AUDIO_WIN_BASE_REG(MV_AUDIO_PLAYBACK_WIN_NUM)
+
+
+/* BITs in Windows 0-3 Control and Base Registers */
+#define MV_AUDIO_WIN_ENABLE_BIT               0
+#define MV_AUDIO_WIN_ENABLE_MASK              (1<<MV_AUDIO_WIN_ENABLE_BIT)
+
+#define MV_AUDIO_WIN_TARGET_OFFSET            4
+#define MV_AUDIO_WIN_TARGET_MASK              (0xF<<MV_AUDIO_WIN_TARGET_OFFSET)
+
+#define MV_AUDIO_WIN_ATTR_OFFSET              8
+#define MV_AUDIO_WIN_ATTR_MASK                (0xFF<<MV_AUDIO_WIN_ATTR_OFFSET)
+
+#define MV_AUDIO_WIN_SIZE_OFFSET              16
+#define MV_AUDIO_WIN_SIZE_MASK                (0xFFFF<<MV_AUDIO_WIN_SIZE_OFFSET)
+
+#define MV_AUDIO_WIN_BASE_OFFSET              16
+#define MV_AUDIO_WIN_BASE_MASK                (0xFFFF<<MV_AUDIO_WIN_BASE_OFFSET)
+
+
+typedef struct _mvAudioDecWin
+{
+    MV_TARGET     target;
+    MV_ADDR_WIN   addrWin;    /* An address window*/
+    MV_BOOL       enable;     /* Address decode window is enabled/disabled    */
+ 
+} MV_AUDIO_DEC_WIN;
+
+
+MV_STATUS mvAudioInit(MV_VOID);
+MV_STATUS mvAudioWinGet(MV_U32 winNum, MV_AUDIO_DEC_WIN *pAddrDecWin);
+MV_STATUS mvAudioWinSet(MV_U32 winNum, MV_AUDIO_DEC_WIN *pAddrDecWin);
+MV_STATUS mvAudioWinInit(MV_VOID);
+MV_VOID   mvAudioAddrDecShow(MV_VOID);
+
+
+#endif
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysCesa.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysCesa.c
new file mode 100644
index 0000000000..84d0cd0bd7
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysCesa.c
@@ -0,0 +1,382 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED.  The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+        this list of conditions and the following disclaimer.
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    *   Neither the name of Marvell nor the names of its contributors may be
+        used to endorse or promote products derived from this software without
+        specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "mvSysCesa.h"
+
+#if (MV_CESA_VERSION >= 2)
+MV_TARGET tdmaAddrDecPrioTable[] =
+{
+#if defined(MV_INCLUDE_SDRAM_CS0)
+    SDRAM_CS0,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS1)
+    SDRAM_CS1,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS2)
+    SDRAM_CS2,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS3)
+    SDRAM_CS3,
+#endif
+#if defined(MV_INCLUDE_PEX)
+    PEX0_MEM,
+#endif
+
+    TBL_TERM
+};
+
+/*******************************************************************************
+* mvCesaWinGet - Get TDMA target address window.
+*
+* DESCRIPTION:
+*       Get TDMA target address window.
+*
+* INPUT:
+*       winNum - TDMA target address decode window number.
+*
+* OUTPUT:
+*       pDecWin - TDMA target window data structure.
+*
+* RETURN:
+*       MV_ERROR if register parameters are invalid.
+*
+*******************************************************************************/
+static MV_STATUS mvCesaWinGet(MV_U32 winNum, MV_DEC_WIN *pDecWin)
+{                                                                                                                         
+    MV_DEC_WIN_PARAMS   winParam;
+    MV_U32              sizeReg, baseReg;
+
+    /* Parameter checking   */
+    if (winNum >= MV_CESA_TDMA_ADDR_DEC_WIN)
+    {
+        mvOsPrintf("%s : ERR. Invalid winNum %d\n", 
+                    __FUNCTION__, winNum);
+        return MV_NOT_SUPPORTED;
+    }
+
+    baseReg = MV_REG_READ( MV_CESA_TDMA_BASE_ADDR_REG(winNum) );
+    sizeReg = MV_REG_READ( MV_CESA_TDMA_WIN_CTRL_REG(winNum) );
+ 
+   /* Check if window is enabled   */
+    if(sizeReg & MV_CESA_TDMA_WIN_ENABLE_MASK) 
+    {
+        pDecWin->enable = MV_TRUE;
+
+        /* Extract window parameters from registers */
+        winParam.targetId = (sizeReg & MV_CESA_TDMA_WIN_TARGET_MASK) >> MV_CESA_TDMA_WIN_TARGET_OFFSET; 
+        winParam.attrib   = (sizeReg & MV_CESA_TDMA_WIN_ATTR_MASK) >> MV_CESA_TDMA_WIN_ATTR_OFFSET;
+        winParam.size     = (sizeReg & MV_CESA_TDMA_WIN_SIZE_MASK) >> MV_CESA_TDMA_WIN_SIZE_OFFSET;
+        winParam.baseAddr = (baseReg & MV_CESA_TDMA_WIN_BASE_MASK);
+
+        /* Translate the decode window parameters to address decode struct */
+        if (MV_OK != mvCtrlParamsToAddrDec(&winParam, pDecWin))
+        {
+            mvOsPrintf("Failed to translate register parameters to CESA address" \
+                       " decode window structure\n");
+            return MV_ERROR;        
+        }
+    }
+    else
+    {
+        pDecWin->enable = MV_FALSE;
+    }
+    return MV_OK;
+}
+
+/*******************************************************************************
+* cesaWinOverlapDetect - Detect CESA TDMA address windows overlapping
+*
+* DESCRIPTION:
+*       An unpredicted behaviur is expected in case TDMA address decode 
+*       windows overlapps.
+*       This function detects TDMA address decode windows overlapping of a 
+*       specified window. The function does not check the window itself for 
+*       overlapping. The function also skipps disabled address decode windows.
+*
+* INPUT:
+*       winNum      - address decode window number.
+*       pAddrDecWin - An address decode window struct.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_TRUE     - if the given address window overlap current address
+*                   decode map, 
+*       MV_FALSE    - otherwise, MV_ERROR if reading invalid data 
+*                   from registers.
+*
+*******************************************************************************/
+static MV_STATUS cesaWinOverlapDetect(MV_U32 winNum, MV_ADDR_WIN *pAddrWin)
+{
+    MV_U32          winNumIndex;
+    MV_DEC_WIN      addrDecWin;
+    
+    for(winNumIndex=0; winNumIndex<MV_CESA_TDMA_ADDR_DEC_WIN; winNumIndex++)
+    {
+        /* Do not check window itself       */
+        if (winNumIndex == winNum)
+        {
+            continue;
+        }
+
+        /* Get window parameters    */
+        if (MV_OK != mvCesaWinGet(winNumIndex, &addrDecWin))
+        {
+            mvOsPrintf("%s: ERR. TargetWinGet failed\n", __FUNCTION__);
+            return MV_ERROR;
+        }
+
+        /* Do not check disabled windows    */
+        if(addrDecWin.enable == MV_FALSE)
+        {
+            continue;
+        }
+
+        if (MV_TRUE == ctrlWinOverlapTest(pAddrWin, &(addrDecWin.addrWin)))
+        {
+            return MV_TRUE;
+        }        
+    }
+    return MV_FALSE;
+}
+
+/*******************************************************************************
+* mvCesaTdmaWinSet - Set CESA TDMA target address window
+*
+* DESCRIPTION:
+*       This function sets a peripheral target (e.g. SDRAM bank0, PCI_MEM0) 
+*       address window, also known as address decode window. 
+*       After setting this target window, the CESA TDMA will be able to access the 
+*       target within the address window. 
+*
+* INPUT:
+*       winNum      - CESA TDMA target address decode window number.
+*       pAddrDecWin - CESA TDMA target window data structure.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_ERROR        - if address window overlapps with other address decode windows.
+*       MV_BAD_PARAM    - if base address is invalid parameter or target is 
+*                       unknown.
+*
+*******************************************************************************/
+static MV_STATUS mvCesaTdmaWinSet(MV_U32 winNum, MV_DEC_WIN *pDecWin)
+{
+    MV_DEC_WIN_PARAMS   winParams;
+    MV_U32              sizeReg, baseReg;
+    
+    /* Parameter checking   */
+    if (winNum >= MV_CESA_TDMA_ADDR_DEC_WIN)
+    {
+        mvOsPrintf("mvCesaTdmaWinSet: ERR. Invalid win num %d\n",winNum);
+        return MV_BAD_PARAM;
+    }
+
+    /* Check if the requested window overlapps with current windows     */
+    if (MV_TRUE == cesaWinOverlapDetect(winNum, &pDecWin->addrWin))
+    {
+        mvOsPrintf("%s: ERR. Window %d overlap\n", __FUNCTION__, winNum);
+        return MV_ERROR;
+    }
+
+    /* check if address is aligned to the size */
+    if(MV_IS_NOT_ALIGN(pDecWin->addrWin.baseLow, pDecWin->addrWin.size))
+    {
+        mvOsPrintf("mvCesaTdmaWinSet: Error setting CESA TDMA window %d to "\
+                   "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n",
+                   winNum,
+                   mvCtrlTargetNameGet(pDecWin->target), 
+                   pDecWin->addrWin.baseLow,
+                   pDecWin->addrWin.size);
+        return MV_ERROR;
+    }
+
+    if(MV_OK != mvCtrlAddrDecToParams(pDecWin, &winParams))
+    {
+        mvOsPrintf("%s: mvCtrlAddrDecToParams Failed\n", __FUNCTION__);
+        return MV_ERROR;
+    }
+
+    /* set Size, Attributes and TargetID */
+    sizeReg = (((winParams.targetId << MV_CESA_TDMA_WIN_TARGET_OFFSET) & MV_CESA_TDMA_WIN_TARGET_MASK) |
+               ((winParams.attrib   << MV_CESA_TDMA_WIN_ATTR_OFFSET)   & MV_CESA_TDMA_WIN_ATTR_MASK)   |
+               ((winParams.size << MV_CESA_TDMA_WIN_SIZE_OFFSET) & MV_CESA_TDMA_WIN_SIZE_MASK));
+
+    if (pDecWin->enable == MV_TRUE)
+    {
+        sizeReg |= MV_CESA_TDMA_WIN_ENABLE_MASK;
+    }
+    else
+    {
+        sizeReg &= ~MV_CESA_TDMA_WIN_ENABLE_MASK;
+    }
+
+    /* Update Base value  */
+    baseReg = (winParams.baseAddr & MV_CESA_TDMA_WIN_BASE_MASK);     
+
+    MV_REG_WRITE( MV_CESA_TDMA_WIN_CTRL_REG(winNum), sizeReg);
+    MV_REG_WRITE( MV_CESA_TDMA_BASE_ADDR_REG(winNum), baseReg);
+        
+    return MV_OK;
+}
+
+
+static MV_STATUS   mvCesaTdmaAddrDecInit (void)
+{
+    MV_U32          winNum;
+    MV_STATUS       status;
+    MV_CPU_DEC_WIN  cpuAddrDecWin;
+    MV_DEC_WIN      cesaWin;
+    MV_U32          winPrioIndex = 0;
+
+    /* First disable all address decode windows */
+    for(winNum=0; winNum<MV_CESA_TDMA_ADDR_DEC_WIN; winNum++)
+    {
+        MV_REG_BIT_RESET(MV_CESA_TDMA_WIN_CTRL_REG(winNum), MV_CESA_TDMA_WIN_ENABLE_MASK);
+    }
+
+    /* Go through all windows in user table until table terminator      */
+    winNum = 0;
+    while( (tdmaAddrDecPrioTable[winPrioIndex] != TBL_TERM) && 
+           (winNum < MV_CESA_TDMA_ADDR_DEC_WIN) )    {
+
+        /* first get attributes from CPU If */
+        status = mvCpuIfTargetWinGet(tdmaAddrDecPrioTable[winPrioIndex], 
+                                     &cpuAddrDecWin);
+        if(MV_NO_SUCH == status){
+	    winPrioIndex++;
+            continue;
+	}
+
+        if (MV_OK != status)
+        {
+            mvOsPrintf("cesaInit: TargetWinGet failed. winNum=%d, winIdx=%d, target=%d, status=0x%x\n",
+                        winNum, winPrioIndex, tdmaAddrDecPrioTable[winPrioIndex], status);
+            return MV_ERROR;
+        }
+        if (cpuAddrDecWin.enable == MV_TRUE)
+        {
+            cesaWin.addrWin.baseHigh = cpuAddrDecWin.addrWin.baseHigh;
+            cesaWin.addrWin.baseLow  = cpuAddrDecWin.addrWin.baseLow;
+            cesaWin.addrWin.size     = cpuAddrDecWin.addrWin.size;
+            cesaWin.enable           = MV_TRUE;
+            cesaWin.target           = tdmaAddrDecPrioTable[winPrioIndex];
+
+#if defined(MV646xx) 
+            /* Get the default attributes for that target window */
+            mvCtrlDefAttribGet(cesaWin.target, &cesaWin.addrWinAttr);
+#endif /* MV646xx */ 
+
+            if(MV_OK != mvCesaTdmaWinSet(winNum, &cesaWin))
+            {
+                mvOsPrintf("mvCesaTdmaWinSet FAILED: winNum=%d\n",
+                           winNum);
+                return MV_ERROR;
+            }
+            winNum++;
+        }
+        winPrioIndex++;
+    }
+    return MV_OK;
+}
+#endif /* MV_CESA_VERSION >= 2 */
+
+
+
+
+MV_STATUS mvCesaInit (int numOfSession, int queueDepth, char* pSramBase, void *osHandle)
+{
+    MV_U32 cesaCryptEngBase;
+    MV_CPU_DEC_WIN addrDecWin;
+
+    if(sizeof(MV_CESA_SRAM_MAP) > MV_CESA_SRAM_SIZE)
+    {
+        mvOsPrintf("mvCesaInit: Wrong SRAM map - %ld > %d\n",
+                sizeof(MV_CESA_SRAM_MAP), MV_CESA_SRAM_SIZE);
+        return MV_FAIL;
+    }
+#if 0
+    if (mvCpuIfTargetWinGet(CRYPT_ENG, &addrDecWin) == MV_OK)
+        cesaCryptEngBase = addrDecWin.addrWin.baseLow;
+    else
+    {
+        mvOsPrintf("mvCesaInit: ERR. mvCpuIfTargetWinGet failed\n");
+        return MV_ERROR;
+    }
+#else
+        cesaCryptEngBase = (MV_U32)pSramBase;
+#endif     
+
+#if 0 /* Already done in the platform init */
+#if (MV_CESA_VERSION >= 2)
+    mvCesaTdmaAddrDecInit();
+#endif /* MV_CESA_VERSION >= 2 */
+#endif
+	return mvCesaHalInit(numOfSession, queueDepth, pSramBase, cesaCryptEngBase, 
+			     osHandle);
+
+}
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysCesa.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysCesa.h
new file mode 100644
index 0000000000..73bcdc5832
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysCesa.h
@@ -0,0 +1,100 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED.  The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer.
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    *   Neither the name of Marvell nor the names of its contributors may be
+        used to endorse or promote products derived from this software without
+        specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __mvSysCesa_h__
+#define __mvSysCesa_h__
+
+
+#include "mvCommon.h"
+#include "cesa/mvCesa.h"
+#include "ctrlEnv/mvCtrlEnvSpec.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+
+/***************************** TDMA Registers *************************************/
+
+#define MV_CESA_TDMA_ADDR_DEC_WIN           4
+
+#define MV_CESA_TDMA_BASE_ADDR_REG(win)     (MV_CESA_TDMA_REG_BASE + 0xa00 + (win<<3))
+
+#define MV_CESA_TDMA_WIN_CTRL_REG(win)      (MV_CESA_TDMA_REG_BASE + 0xa04 + (win<<3))
+
+#define MV_CESA_TDMA_WIN_ENABLE_BIT         0
+#define MV_CESA_TDMA_WIN_ENABLE_MASK        (1 << MV_CESA_TDMA_WIN_ENABLE_BIT)
+
+#define MV_CESA_TDMA_WIN_TARGET_OFFSET      4 
+#define MV_CESA_TDMA_WIN_TARGET_MASK        (0xf << MV_CESA_TDMA_WIN_TARGET_OFFSET)
+
+#define MV_CESA_TDMA_WIN_ATTR_OFFSET        8 
+#define MV_CESA_TDMA_WIN_ATTR_MASK          (0xff << MV_CESA_TDMA_WIN_ATTR_OFFSET)
+
+#define MV_CESA_TDMA_WIN_SIZE_OFFSET        16
+#define MV_CESA_TDMA_WIN_SIZE_MASK          (0xFFFF << MV_CESA_TDMA_WIN_SIZE_OFFSET)
+
+#define MV_CESA_TDMA_WIN_BASE_OFFSET        16
+#define MV_CESA_TDMA_WIN_BASE_MASK          (0xFFFF << MV_CESA_TDMA_WIN_BASE_OFFSET)
+
+
+MV_STATUS   mvCesaInit (int numOfSession, int queueDepth, char* pSramBase, void *osHandle);
+
+#endif
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysDram.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysDram.c
new file mode 100644
index 0000000000..6f76c2caa9
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysDram.c
@@ -0,0 +1,348 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+/* includes */
+
+#include "ddr2/mvDramIf.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+#include "ctrlEnv/sys/mvSysDram.h"
+
+/* #define MV_DEBUG */
+#ifdef MV_DEBUG
+#define DB(x) x
+#else
+#define DB(x)
+#endif
+
+static MV_BOOL sdramIfWinOverlap(MV_TARGET target, MV_ADDR_WIN *pAddrWin);
+
+/*******************************************************************************
+* mvDramIfWinSet - Set DRAM interface address decode window
+*
+* DESCRIPTION: 
+*       This function sets DRAM interface address decode window.
+*
+* INPUT:
+*	    target      - System target. Use only SDRAM targets.
+*       pAddrDecWin - SDRAM address window structure.
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       MV_BAD_PARAM if parameters are invalid or window is invalid, MV_OK
+*       otherwise.
+*******************************************************************************/
+MV_STATUS mvDramIfWinSet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin)
+{
+	MV_U32 baseReg=0,sizeReg=0;
+	MV_U32 baseToReg=0 , sizeToReg=0;
+
+    /* Check parameters */
+	if (!MV_TARGET_IS_DRAM(target))
+	{
+		mvOsPrintf("mvDramIfWinSet: target %d is not SDRAM\n", target);
+		return MV_BAD_PARAM;
+	}
+
+    /* Check if the requested window overlaps with current enabled windows	*/
+    if (MV_TRUE == sdramIfWinOverlap(target, &pAddrDecWin->addrWin))
+	{
+        mvOsPrintf("mvDramIfWinSet: ERR. Target %d overlaps\n", target);
+		return MV_BAD_PARAM;
+	}
+
+	/* check if address is aligned to the size */
+	if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size))
+	{
+		mvOsPrintf("mvDramIfWinSet:Error setting DRAM interface window %d."\
+				   "\nAddress 0x%08x is unaligned to size 0x%x.\n",
+                   target, 
+				   pAddrDecWin->addrWin.baseLow,
+				   pAddrDecWin->addrWin.size);
+		return MV_ERROR;
+	}
+
+	/* read base register*/
+	baseReg = MV_REG_READ(SDRAM_BASE_ADDR_REG(0,target));
+
+	/* read size register */
+	sizeReg = MV_REG_READ(SDRAM_SIZE_REG(0,target));
+
+	/* BaseLow[31:16] => base register [31:16]		*/
+	baseToReg = pAddrDecWin->addrWin.baseLow & SCBAR_BASE_MASK;
+
+	/* Write to address decode Base Address Register                  */
+	baseReg &= ~SCBAR_BASE_MASK;
+	baseReg |= baseToReg;
+
+	/* Translate the given window size to register format			*/
+	sizeToReg = ctrlSizeToReg(pAddrDecWin->addrWin.size, SCSR_SIZE_ALIGNMENT);
+
+	/* Size parameter validity check.                                   */
+	if (-1 == sizeToReg)
+	{
+		mvOsPrintf("mvCtrlAddrDecToReg: ERR. Win %d size invalid.\n",target);
+		return MV_BAD_PARAM;
+	}
+
+	/* set size */
+	sizeReg &= ~SCSR_SIZE_MASK;
+	/* Size is located at upper 16 bits */
+	sizeReg |= (sizeToReg << SCSR_SIZE_OFFS);
+
+	/* enable/Disable */
+	if (MV_TRUE == pAddrDecWin->enable)
+	{
+		sizeReg |= SCSR_WIN_EN;
+	}
+	else
+	{
+		sizeReg &= ~SCSR_WIN_EN;
+	}
+
+	/* 3) Write to address decode Base Address Register                   */
+	MV_REG_WRITE(SDRAM_BASE_ADDR_REG(0,target), baseReg);
+
+	/* Write to address decode Size Register                        	*/
+	MV_REG_WRITE(SDRAM_SIZE_REG(0,target), sizeReg);
+	
+	return MV_OK;
+}
+/*******************************************************************************
+* mvDramIfWinGet - Get DRAM interface address decode window
+*
+* DESCRIPTION: 
+*       This function gets DRAM interface address decode window.
+*
+* INPUT:
+*	    target - System target. Use only SDRAM targets.
+*
+* OUTPUT:
+*       pAddrDecWin - SDRAM address window structure.
+*
+* RETURN:
+*       MV_BAD_PARAM if parameters are invalid or window is invalid, MV_OK
+*       otherwise.
+*******************************************************************************/
+MV_STATUS mvDramIfWinGet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin)
+{
+	MV_U32 baseReg,sizeReg;
+	MV_U32 sizeRegVal;
+	/* Check parameters */
+	if (!MV_TARGET_IS_DRAM(target))
+	{
+		mvOsPrintf("mvDramIfWinGet: target %d is Illigal\n", target);
+		return MV_ERROR;
+	}
+
+	/* Read base and size registers */
+	sizeReg = MV_REG_READ(SDRAM_SIZE_REG(0,target));
+	baseReg = MV_REG_READ(SDRAM_BASE_ADDR_REG(0,target));
+
+	sizeRegVal = (sizeReg & SCSR_SIZE_MASK) >> SCSR_SIZE_OFFS;
+
+	pAddrDecWin->addrWin.size = ctrlRegToSize(sizeRegVal,
+							SCSR_SIZE_ALIGNMENT);
+
+    	/* Check if ctrlRegToSize returned OK */
+	if (-1 == pAddrDecWin->addrWin.size)
+	{
+		mvOsPrintf("mvDramIfWinGet: size of target %d is Illigal\n", target);
+		return MV_ERROR;
+	}
+
+	/* Extract base address						*/
+	/* Base register [31:16] ==> baseLow[31:16] 		*/
+	pAddrDecWin->addrWin.baseLow = baseReg & SCBAR_BASE_MASK;
+
+	pAddrDecWin->addrWin.baseHigh =  0;
+
+
+	if (sizeReg & SCSR_WIN_EN)
+	{
+		pAddrDecWin->enable = MV_TRUE;
+	}
+	else
+	{
+		pAddrDecWin->enable = MV_FALSE;			
+	}
+
+	return MV_OK;
+}
+/*******************************************************************************
+* mvDramIfWinEnable - Enable/Disable SDRAM address decode window
+*
+* DESCRIPTION: 
+*		This function enable/Disable SDRAM address decode window.
+*
+* INPUT:
+*	    target - System target. Use only SDRAM targets.
+*
+* OUTPUT:
+*		None.
+*
+* RETURN:
+*		MV_ERROR in case function parameter are invalid, MV_OK otherewise.
+*
+*******************************************************************************/
+MV_STATUS mvDramIfWinEnable(MV_TARGET target, MV_BOOL enable)
+{
+	MV_DRAM_DEC_WIN 	addrDecWin;
+
+	/* Check parameters */
+	if (!MV_TARGET_IS_DRAM(target))
+	{
+		mvOsPrintf("mvDramIfWinEnable: target %d is Illigal\n", target);
+		return MV_ERROR;
+	}
+
+	if (enable == MV_TRUE) 
+	{   /* First check for overlap with other enabled windows				*/
+		if (MV_OK != mvDramIfWinGet(target, &addrDecWin))
+		{
+			mvOsPrintf("mvDramIfWinEnable:ERR. Getting target %d failed.\n", 
+                                                                        target);
+			return MV_ERROR;
+		}
+		/* Check for overlapping */
+		if (MV_FALSE == sdramIfWinOverlap(target, &(addrDecWin.addrWin)))
+		{
+			/* No Overlap. Enable address decode winNum window              */
+			MV_REG_BIT_SET(SDRAM_SIZE_REG(0,target), SCSR_WIN_EN);
+		}
+		else
+		{   /* Overlap detected	*/
+			mvOsPrintf("mvDramIfWinEnable: ERR. Target %d overlap detect\n",
+                                                                        target);
+			return MV_ERROR;
+		}
+	}
+	else
+	{   /* Disable address decode winNum window                             */
+		MV_REG_BIT_RESET(SDRAM_SIZE_REG(0, target), SCSR_WIN_EN);
+	}
+
+	return MV_OK;
+}
+
+/*******************************************************************************
+* sdramIfWinOverlap - Check if an address window overlap an SDRAM address window
+*
+* DESCRIPTION:
+*		This function scan each SDRAM address decode window to test if it 
+*		overlapps the given address windoow 
+*
+* INPUT:
+*       target      - SDRAM target where the function skips checking.
+*       pAddrDecWin - The tested address window for overlapping with 
+*					  SDRAM windows.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_TRUE if the given address window overlaps any enabled address
+*       decode map, MV_FALSE otherwise.
+*
+*******************************************************************************/
+static MV_BOOL sdramIfWinOverlap(MV_TARGET target, MV_ADDR_WIN *pAddrWin)
+{
+	MV_TARGET	targetNum;
+	MV_DRAM_DEC_WIN 	addrDecWin;
+	
+	for(targetNum = SDRAM_CS0; targetNum < MV_DRAM_MAX_CS ; targetNum++)
+	{
+		/* don't check our winNum or illegal targets */
+		if (targetNum == target)
+		{
+			continue;
+		}
+		
+		/* Get window parameters 	*/
+		if (MV_OK != mvDramIfWinGet(targetNum, &addrDecWin))
+		{
+			mvOsPrintf("sdramIfWinOverlap: ERR. TargetWinGet failed\n");
+			return MV_ERROR;
+		}
+	
+		/* Do not check disabled windows	*/
+		if (MV_FALSE == addrDecWin.enable)
+		{
+			continue;
+		}
+	
+		if(MV_TRUE == ctrlWinOverlapTest(pAddrWin, &addrDecWin.addrWin))
+		{                    
+			mvOsPrintf(
+			"sdramIfWinOverlap: Required target %d overlap winNum %d\n", 
+			target, targetNum);
+			return MV_TRUE;           
+		}
+	}
+	
+	return MV_FALSE;
+}
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysDram.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysDram.h
new file mode 100644
index 0000000000..7bd9c9de27
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysDram.h
@@ -0,0 +1,80 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __sysDram
+#define __sysDram
+
+/* This structure describes CPU interface address decode window               */
+typedef struct _mvDramIfDecWin 
+{
+	MV_ADDR_WIN   addrWin;    /* An address window*/
+	MV_BOOL       enable;     /* Address decode window is enabled/disabled    */
+}MV_DRAM_DEC_WIN;
+
+MV_STATUS mvDramIfWinSet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin);
+MV_STATUS mvDramIfWinGet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin);
+MV_STATUS mvDramIfWinEnable(MV_TARGET target, MV_BOOL enable);
+
+#endif
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysGbe.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysGbe.c
new file mode 100644
index 0000000000..7f6e4a59dd
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysGbe.c
@@ -0,0 +1,658 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#include "ctrlEnv/sys/mvSysGbe.h"
+
+
+
+typedef struct _mvEthDecWin
+{
+    MV_TARGET     target;
+    MV_ADDR_WIN   addrWin;  /* An address window*/
+    MV_BOOL       enable;   /* Address decode window is enabled/disabled */
+  
+}MV_ETH_DEC_WIN;
+
+MV_TARGET ethAddrDecPrioTap[] =
+{
+#if defined(MV_INCLUDE_SDRAM_CS0)
+        SDRAM_CS0,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS1)
+        SDRAM_CS1,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS2)
+        SDRAM_CS2,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS3)
+        SDRAM_CS3,
+#endif
+#if defined(MV_INCLUDE_DEVICE_CS0)
+        DEVICE_CS0,
+#endif
+#if defined(MV_INCLUDE_DEVICE_CS1)
+        DEVICE_CS1,
+#endif
+#if defined(MV_INCLUDE_DEVICE_CS2)
+        DEVICE_CS2,
+#endif
+#if defined(MV_INCLUDE_DEVICE_CS3)
+        DEVICE_CS3,
+#endif
+#if defined(MV_INCLUDE_PEX)
+        PEX0_IO,
+#endif
+        TBL_TERM
+};
+
+static MV_STATUS   ethWinOverlapDetect(int port, MV_U32 winNum, MV_ADDR_WIN *pAddrWin);
+static MV_STATUS   mvEthWinSet(int port, MV_U32 winNum, MV_ETH_DEC_WIN *pAddrDecWin);
+static MV_STATUS   mvEthWinGet(int port, MV_U32 winNum, MV_ETH_DEC_WIN *pAddrDecWin);
+
+                                                                                                                             
+/*******************************************************************************
+* mvEthWinInit - Initialize ETH address decode windows 
+*
+* DESCRIPTION:
+*               This function initialize ETH window decode unit. It set the 
+*               default address decode windows of the unit.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_ERROR if setting fail.
+*******************************************************************************/
+/* Configure EthDrv memory map registes. */
+MV_STATUS 	mvEthWinInit (int port)
+{
+    MV_U32          winNum, status, winPrioIndex=0, i, regVal=0;
+    MV_ETH_DEC_WIN  ethWin;
+    MV_CPU_DEC_WIN  cpuAddrDecWin;
+    static MV_U32   accessProtReg = 0;
+
+#if (MV_ETH_VERSION <= 1)
+    static MV_BOOL  isFirst = MV_TRUE;
+
+    if(isFirst == MV_FALSE)
+    {
+        MV_REG_WRITE(ETH_ACCESS_PROTECT_REG(port), accessProtReg);
+        return MV_OK;
+    }
+    isFirst = MV_FALSE;
+#endif /* MV_GIGA_ETH_VERSION */
+
+    /* Initiate Ethernet address decode */
+
+    /* First disable all address decode windows */
+    for(winNum=0; winNum<ETH_MAX_DECODE_WIN; winNum++)
+    {
+        regVal |= MV_BIT_MASK(winNum);
+    }
+    MV_REG_WRITE(ETH_BASE_ADDR_ENABLE_REG(port), regVal);
+
+   /* Go through all windows in user table until table terminator      */
+    for (winNum=0; ((ethAddrDecPrioTap[winPrioIndex] != TBL_TERM) && 
+                    (winNum < ETH_MAX_DECODE_WIN)); )
+    {
+        /* first get attributes from CPU If */
+        status = mvCpuIfTargetWinGet(ethAddrDecPrioTap[winPrioIndex], 
+                                     &cpuAddrDecWin);
+
+        if(MV_NO_SUCH == status)
+        {
+            winPrioIndex++;
+            continue;
+        }
+		if (MV_OK != status)
+		{
+			mvOsPrintf("mvEthWinInit: ERR. mvCpuIfTargetWinGet failed\n");
+			return MV_ERROR;
+		}
+
+        if (cpuAddrDecWin.enable == MV_TRUE)
+        {
+            ethWin.addrWin.baseHigh = cpuAddrDecWin.addrWin.baseHigh;
+            ethWin.addrWin.baseLow = cpuAddrDecWin.addrWin.baseLow;
+            ethWin.addrWin.size = cpuAddrDecWin.addrWin.size;
+            ethWin.enable = MV_TRUE;
+            ethWin.target = ethAddrDecPrioTap[winPrioIndex];
+
+            if(MV_OK != mvEthWinSet(port, winNum, &ethWin))
+            {
+                mvOsPrintf("mvEthWinInit: ERR. mvEthWinSet failed winNum=%d\n",
+                           winNum);
+                return MV_ERROR;
+            }
+            winNum++;
+        }
+        winPrioIndex ++;
+    }
+
+    /* set full access to all windows. */
+    for(i=0; i<winNum; i++)
+    {
+        accessProtReg |= (FULL_ACCESS << (i*2));
+    }
+    MV_REG_WRITE(ETH_ACCESS_PROTECT_REG(port), accessProtReg);
+
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvEthWinSet - Set ETH target address window
+*
+* DESCRIPTION:
+*       This function sets a peripheral target (e.g. SDRAM bank0, PCI_MEM0)
+*       address window, also known as address decode window.
+*       After setting this target window, the ETH will be able to access the
+*       target within the address window.
+*
+* INPUT:
+*       winNum      - ETH to target address decode window number.
+*       pAddrDecWin - ETH target window data structure.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_ERROR if address window overlapps with other address decode windows.
+*       MV_BAD_PARAM if base address is invalid parameter or target is
+*       unknown.
+*
+*******************************************************************************/
+MV_STATUS mvEthWinSet(int port, MV_U32 winNum, MV_ETH_DEC_WIN *pAddrDecWin)
+{
+    MV_TARGET_ATTRIB    targetAttribs;
+    MV_DEC_REGS         decRegs;
+    
+    /* Parameter checking   */
+    if (winNum >= ETH_MAX_DECODE_WIN)
+    {
+        mvOsPrintf("mvEthWinSet: ERR. Invalid win num %d\n",winNum);
+        return MV_BAD_PARAM;
+    }    
+    
+    /* Check if the requested window overlapps with current windows     */
+    if (MV_TRUE == ethWinOverlapDetect(port, winNum, &pAddrDecWin->addrWin))
+    {
+        mvOsPrintf("mvEthWinSet: ERR. Window %d overlap\n", winNum);
+        return MV_ERROR;
+    }
+
+	/* check if address is aligned to the size */
+	if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size))
+	{
+		mvOsPrintf("mvEthWinSet: Error setting Ethernet window %d to "\
+				   "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n",
+				   winNum,
+				   mvCtrlTargetNameGet(pAddrDecWin->target), 
+				   pAddrDecWin->addrWin.baseLow,
+				   pAddrDecWin->addrWin.size);
+		return MV_ERROR;
+	}
+
+    
+    decRegs.baseReg = MV_REG_READ(ETH_WIN_BASE_REG(port, winNum));
+    decRegs.sizeReg = MV_REG_READ(ETH_WIN_SIZE_REG(port, winNum));
+    
+    if (MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs))
+    {
+        mvOsPrintf("mvEthWinSet:mvCtrlAddrDecToReg Failed\n");
+        return MV_ERROR;
+    }
+    
+    mvCtrlAttribGet(pAddrDecWin->target,&targetAttribs);
+    
+    /* set attributes */
+    decRegs.baseReg &= ~ETH_WIN_ATTR_MASK;
+    decRegs.baseReg |= targetAttribs.attrib << ETH_WIN_ATTR_OFFS;
+    /* set target ID */
+    decRegs.baseReg &= ~ETH_WIN_TARGET_MASK;
+    decRegs.baseReg |= targetAttribs.targetId << ETH_WIN_TARGET_OFFS;
+    
+    /* for the safe side we disable the window before writing the new
+    values */
+    mvEthWinEnable(port, winNum, MV_FALSE);
+    MV_REG_WRITE(ETH_WIN_BASE_REG(port, winNum), decRegs.baseReg);
+    
+    /* Write to address decode Size Register                            */
+    MV_REG_WRITE(ETH_WIN_SIZE_REG(port, winNum), decRegs.sizeReg);
+    
+    /* Enable address decode target window                              */
+    if (pAddrDecWin->enable == MV_TRUE)
+    {
+            mvEthWinEnable(port, winNum, MV_TRUE);
+    }
+    
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvETHWinGet - Get dma peripheral target address window.
+*
+* DESCRIPTION:
+*               Get ETH peripheral target address window.
+*
+* INPUT:
+*       winNum - ETH to target address decode window number.
+*
+* OUTPUT:
+*       pAddrDecWin - ETH target window data structure.
+*
+* RETURN:
+*       MV_ERROR if register parameters are invalid.
+*
+*******************************************************************************/
+MV_STATUS mvEthWinGet(int port, MV_U32 winNum, MV_ETH_DEC_WIN *pAddrDecWin)
+{
+    MV_DEC_REGS decRegs;
+    MV_TARGET_ATTRIB targetAttrib;
+    
+    /* Parameter checking   */
+    if (winNum >= ETH_MAX_DECODE_WIN)
+    {
+        mvOsPrintf("mvEthWinGet: ERR. Invalid winNum %d\n", winNum);
+        return MV_NOT_SUPPORTED;
+    }
+    
+    decRegs.baseReg =  MV_REG_READ(ETH_WIN_BASE_REG(port, winNum));
+    decRegs.sizeReg = MV_REG_READ(ETH_WIN_SIZE_REG(port, winNum));
+    
+    if (MV_OK != mvCtrlRegToAddrDec(&decRegs,&(pAddrDecWin->addrWin)))
+    {
+        mvOsPrintf("mvAhbToMbusWinGet: mvCtrlRegToAddrDec Failed \n");
+        return MV_ERROR;
+    }
+    
+    /* attrib and targetId */
+    targetAttrib.attrib = 
+     (decRegs.baseReg & ETH_WIN_ATTR_MASK) >> ETH_WIN_ATTR_OFFS;
+    targetAttrib.targetId = 
+     (decRegs.baseReg & ETH_WIN_TARGET_MASK) >> ETH_WIN_TARGET_OFFS;
+    
+    pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib);
+    
+    /* Check if window is enabled   */
+    if (~(MV_REG_READ(ETH_BASE_ADDR_ENABLE_REG(port))) & (1 << winNum) )
+    {
+        pAddrDecWin->enable = MV_TRUE;
+    }
+    else
+    {
+        pAddrDecWin->enable = MV_FALSE;
+    }
+    
+        return MV_OK;
+}
+
+/*******************************************************************************
+* mvEthWinEnable - Enable/disable a ETH to target address window
+*
+* DESCRIPTION:
+*       This function enable/disable a ETH to target address window.
+*       According to parameter 'enable' the routine will enable the
+*       window, thus enabling ETH accesses (before enabling the window it is
+*       tested for overlapping). Otherwise, the window will be disabled.
+*
+* INPUT:
+*       winNum - ETH to target address decode window number.
+*       enable - Enable/disable parameter.
+*
+* OUTPUT:
+*       N/A
+*
+* RETURN:
+*       MV_ERROR if decode window number was wrong or enabled window overlapps.
+*
+*******************************************************************************/
+MV_STATUS mvEthWinEnable(int port, MV_U32 winNum,MV_BOOL enable)
+{
+    MV_ETH_DEC_WIN addrDecWin;
+
+    /* Parameter checking   */
+    if (winNum >= ETH_MAX_DECODE_WIN)
+    {
+        mvOsPrintf("mvEthTargetWinEnable:ERR. Invalid winNum%d\n",winNum);
+        return MV_ERROR;
+    }
+
+    if (enable == MV_TRUE)
+    {   /* First check for overlap with other enabled windows               */
+        /* Get current window */
+        if (MV_OK != mvEthWinGet(port, winNum, &addrDecWin))
+        {
+            mvOsPrintf("mvEthTargetWinEnable:ERR. targetWinGet fail\n");
+            return MV_ERROR;
+        }
+        /* Check for overlapping */
+        if (MV_FALSE == ethWinOverlapDetect(port, winNum, &(addrDecWin.addrWin)))
+        {
+            /* No Overlap. Enable address decode target window              */
+            MV_REG_BIT_RESET(ETH_BASE_ADDR_ENABLE_REG(port), (1 << winNum));
+        }
+        else
+        {   /* Overlap detected */
+            mvOsPrintf("mvEthTargetWinEnable:ERR. Overlap detected\n");
+            return MV_ERROR;
+        }
+    }
+    else
+    {   /* Disable address decode target window                             */
+        MV_REG_BIT_SET(ETH_BASE_ADDR_ENABLE_REG(port), (1 << winNum));
+    }
+    return MV_OK;
+}
+ 
+/*******************************************************************************
+* mvEthWinTargetGet - Get Window number associated with target
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+*       window number
+*
+*******************************************************************************/
+MV_U32  mvEthWinTargetGet(int port, MV_TARGET target)
+{
+    MV_ETH_DEC_WIN decWin;
+    MV_U32 winNum;
+
+    /* Check parameters */
+    if (target >= MAX_TARGETS)
+    {
+        mvOsPrintf("mvAhbToMbusWinTargetGet: target %d is Illigal\n", target);
+        return 0xffffffff;
+    }
+
+    for (winNum=0; winNum<ETH_MAX_DECODE_WIN; winNum++)
+    {
+        if (mvEthWinGet(port, winNum,&decWin) != MV_OK)
+        {
+            mvOsPrintf("mvAhbToMbusWinTargetGet: window returned error\n");
+            return 0xffffffff;
+        }
+
+        if (decWin.enable == MV_TRUE)
+        {
+            if (decWin.target == target)
+            {
+                return winNum;
+            }  
+        }
+    }
+    return 0xFFFFFFFF;
+}
+ 
+/*******************************************************************************
+* mvEthProtWinSet - Set access protection of Ethernet to target window.
+*
+* DESCRIPTION:
+*       Each Ethernet port can be configured with access attributes for each 
+*       of the Ethenret to target windows (address decode windows). This
+*       function sets access attributes to a given window for the given channel.
+*
+* INPUTS:
+*       ethPort   - ETH channel number. See MV_ETH_CHANNEL enumerator.
+*       winNum - IETH to target address decode window number.
+*       access - IETH access rights. See MV_ACCESS_RIGHTS enumerator.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_ERROR in case window number is invalid or access right reserved.
+*
+*******************************************************************************/
+MV_STATUS mvEthProtWinSet(MV_U32 portNo, MV_U32 winNum, MV_ACCESS_RIGHTS access)
+{    
+    MV_U32 protReg;
+
+    /* Parameter checking   */
+    if(portNo >= mvCtrlEthMaxPortGet())
+    {
+        mvOsPrintf("mvEthProtWinSet:ERR. Invalid port number %d\n", portNo);
+        return MV_ERROR;
+    }
+    
+    if (winNum >= ETH_MAX_DECODE_WIN)
+    {
+            mvOsPrintf("mvEthProtWinSet:ERR. Invalid winNum%d\n",winNum);
+            return MV_ERROR;
+    }
+
+    if((access == ACC_RESERVED) || (access >= MAX_ACC_RIGHTS))
+    {
+        mvOsPrintf("mvEthProtWinSet:ERR. Inv access param %d\n", access);
+        return MV_ERROR;
+    }
+    /* Read current protection register */
+    protReg = MV_REG_READ(ETH_ACCESS_PROTECT_REG(portNo));
+                          
+    /* Clear protection window field */
+    protReg &= ~(ETH_PROT_WIN_MASK(winNum));
+
+    /* Set new protection field value */
+    protReg |= (access << (ETH_PROT_WIN_OFFS(winNum)));
+    
+    /* Write protection register back   */
+    MV_REG_WRITE(ETH_ACCESS_PROTECT_REG(portNo), protReg);
+
+    return MV_OK;
+}               
+
+/*******************************************************************************
+* ethWinOverlapDetect - Detect ETH address windows overlapping
+*
+* DESCRIPTION:
+*       An unpredicted behaviur is expected in case ETH address decode
+*       windows overlapps.
+*       This function detects ETH address decode windows overlapping of a
+*       specified window. The function does not check the window itself for
+*       overlapping. The function also skipps disabled address decode windows.
+*
+* INPUT:
+*       winNum      - address decode window number.
+*       pAddrDecWin - An address decode window struct.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_TRUE if the given address window overlap current address
+*       decode map, MV_FALSE otherwise, MV_ERROR if reading invalid data
+*       from registers.
+*
+*******************************************************************************/
+static MV_STATUS ethWinOverlapDetect(int port, MV_U32 winNum, MV_ADDR_WIN *pAddrWin)
+{
+    MV_U32              baseAddrEnableReg;
+    MV_U32              winNumIndex;
+    MV_ETH_DEC_WIN      addrDecWin;
+                                                                                                                             
+    /* Read base address enable register. Do not check disabled windows     */
+    baseAddrEnableReg = MV_REG_READ(ETH_BASE_ADDR_ENABLE_REG(port));
+                                                                                                                             
+    for (winNumIndex=0; winNumIndex<ETH_MAX_DECODE_WIN; winNumIndex++)
+    {
+        /* Do not check window itself           */
+        if (winNumIndex == winNum)
+        {
+            continue;
+        }
+    
+        /* Do not check disabled windows        */
+        if (baseAddrEnableReg & (1 << winNumIndex))
+        {
+            continue;
+        }
+    
+        /* Get window parameters        */
+        if (MV_OK != mvEthWinGet(port, winNumIndex, &addrDecWin))
+        {
+            mvOsPrintf("ethWinOverlapDetect: ERR. TargetWinGet failed\n");
+            return MV_ERROR;
+        }
+/*    
+        mvOsPrintf("ethWinOverlapDetect:\n
+            winNumIndex =%d baseHigh =0x%x baseLow=0x%x size=0x%x enable=0x%x\n",
+            winNumIndex,
+            addrDecWin.addrWin.baseHigh,
+            addrDecWin.addrWin.baseLow,
+            addrDecWin.addrWin.size,
+            addrDecWin.enable);
+*/
+        if (MV_TRUE == ctrlWinOverlapTest(pAddrWin, &(addrDecWin.addrWin)))
+        {
+            return MV_TRUE;
+        }
+    }
+    return MV_FALSE;
+}
+
+/*******************************************************************************
+* mvEthAddrDecShow - Print the Etherent address decode map.
+*
+* DESCRIPTION:
+*       This function print the Etherent address decode map.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+void    mvEthPortAddrDecShow(int port)
+{
+    MV_ETH_DEC_WIN  win;
+    int             i;
+
+    mvOsOutput( "\n" );
+    mvOsOutput( "ETH %d:\n", port );
+    mvOsOutput( "----\n" );
+
+    for( i = 0; i < ETH_MAX_DECODE_WIN; i++ )
+    {
+        memset( &win, 0, sizeof(ETH_MAX_DECODE_WIN) );
+
+        mvOsOutput( "win%d - ", i );
+
+        if( mvEthWinGet(port, i, &win ) == MV_OK )
+        {
+            if( win.enable )
+            {
+                mvOsOutput( "%s base %08x, ",
+                mvCtrlTargetNameGet(win.target), win.addrWin.baseLow );
+                mvOsOutput( "...." );
+                mvSizePrint( win.addrWin.size );
+
+                mvOsOutput( "\n" );
+            }
+            else
+                mvOsOutput( "disable\n" );
+        }
+    }
+    return;
+}
+
+void    mvEthAddrDecShow(void)
+{
+    int port;
+
+    for(port=0; port<mvCtrlEthMaxPortGet(); port++)
+    {
+	if (MV_FALSE == mvCtrlPwrClckGet(ETH_GIG_UNIT_ID, port)) continue;
+    
+        mvEthPortAddrDecShow(port);
+    }
+}
+
+
+void    mvEthInit(void)
+{
+    MV_U32 port;
+
+    /* Power down all existing ports */
+    for(port=0; port<mvCtrlEthMaxPortGet(); port++)
+    {
+	    if (MV_FALSE == mvCtrlPwrClckGet(ETH_GIG_UNIT_ID, port)) 
+            continue;
+
+        mvEthPortPowerUp(port);
+	    mvEthWinInit(port);
+    }
+    mvEthHalInit();
+}
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysGbe.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysGbe.h
new file mode 100644
index 0000000000..615af512d3
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysGbe.h
@@ -0,0 +1,113 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+        this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvSysGbeh
+#define __INCmvSysGbeh
+
+#include "mvCommon.h"
+#include "eth/mvEth.h"
+#include "ctrlEnv/mvCtrlEnvSpec.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+
+#define ETH_WIN_BASE_REG(port, win)         (MV_ETH_REG_BASE(port) + 0x200 + ((win)<<3))
+#define ETH_WIN_SIZE_REG(port, win)         (MV_ETH_REG_BASE(port) + 0x204 + ((win)<<3))
+#define ETH_WIN_REMAP_REG(port, win)        (MV_ETH_REG_BASE(port) + 0x280 + ((win)<<2))
+#define ETH_BASE_ADDR_ENABLE_REG(port)      (MV_ETH_REG_BASE(port) + 0x290)
+#define ETH_ACCESS_PROTECT_REG(port)        (MV_ETH_REG_BASE(port) + 0x294)
+
+/**** Address decode parameters ****/
+
+/* Ethernet Base Address Register bits */
+#define ETH_MAX_DECODE_WIN              6
+#define ETH_MAX_HIGH_ADDR_REMAP_WIN     4
+
+/* Ethernet Port Access Protect (EPAP) register */
+
+/* The target associated with this window*/
+#define ETH_WIN_TARGET_OFFS             0 
+#define ETH_WIN_TARGET_MASK             (0xf << ETH_WIN_TARGET_OFFS)
+/* The target attributes Associated with window */
+#define ETH_WIN_ATTR_OFFS               8 
+#define ETH_WIN_ATTR_MASK               (0xff << ETH_WIN_ATTR_OFFS)
+
+/* Ethernet Port Access Protect Register (EPAPR) */
+#define ETH_PROT_NO_ACCESS              NO_ACCESS_ALLOWED
+#define ETH_PROT_READ_ONLY              READ_ONLY
+#define ETH_PROT_FULL_ACCESS            FULL_ACCESS
+#define ETH_PROT_WIN_OFFS(winNum)       (2 * (winNum))
+#define ETH_PROT_WIN_MASK(winNum)       (0x3 << ETH_PROT_WIN_OFFS(winNum))
+
+MV_STATUS   mvEthWinInit (int port);
+MV_STATUS   mvEthWinEnable(int port, MV_U32 winNum, MV_BOOL enable);
+MV_U32      mvEthWinTargetGet(int port, MV_TARGET target);
+MV_STATUS mvEthProtWinSet(MV_U32 portNo, MV_U32 winNum, MV_ACCESS_RIGHTS
+		access);
+
+void        mvEthPortAddrDecShow(int port);
+
+MV_VOID     mvEthAddrDecShow(MV_VOID);
+
+void        mvEthInit(void);
+
+#endif
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysPex.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysPex.c
new file mode 100644
index 0000000000..b0cb466ab3
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysPex.c
@@ -0,0 +1,1697 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "ctrlEnv/sys/mvSysPex.h"
+
+/* this structure describes the mapping between a Pex Window and a CPU target*/
+typedef struct _pexWinToTarget
+{
+	MV_TARGET target;
+	MV_BOOL	  enable;
+
+}PEX_WIN_TO_TARGET;
+
+/* this array is a priority array that define How Pex windows should be 
+configured , We have only 6 Pex Windows that can be configured , but we
+have maximum of 9 CPU target windows ! the following array is a priority
+array where the lowest index has the highest priotiy and the highest 
+index has the lowest priority of being cnfigured */
+
+MV_U32	pexDevBarPrioTable[] =
+{
+#if defined(MV_INCLUDE_DEVICE_CS0)
+    DEVICE_CS0,
+#endif
+#if defined(MV_INCLUDE_DEVICE_CS1)
+    DEVICE_CS1,
+#endif
+#if defined(MV_INCLUDE_DEVICE_CS2)
+    DEVICE_CS2,
+#endif                                               
+#if defined(MV_INCLUDE_DEVICE_CS3)
+    DEVICE_CS3,
+#endif
+/*
+#if defined(MV_INCLUDE_DEVICE_CS4)
+    DEVICE_CS4,
+#endif
+*/
+    TBL_TERM
+};
+
+
+/* PEX Wins registers offsets are inconsecutive. This struct describes WIN	*/
+/* register offsets	and its function where its is located.					*/
+/* Also, PEX address remap registers offsets are inconsecutive. This struct	*/
+/* describes address remap register offsets									*/
+typedef struct _pexWinRegInfo
+{
+    MV_U32 baseLowRegOffs;
+	MV_U32 baseHighRegOffs;
+	MV_U32 sizeRegOffs;
+	MV_U32 remapLowRegOffs;
+	MV_U32 remapHighRegOffs;
+
+}PEX_WIN_REG_INFO;
+
+static MV_STATUS pexWinOverlapDetect(MV_U32 pexIf, MV_U32 winNum,
+									 MV_ADDR_WIN *pAddrWin);
+static MV_STATUS pexWinRegInfoGet(MV_U32 pexIf, MV_U32 winNum,
+								  PEX_WIN_REG_INFO *pWinRegInfo);
+
+static MV_STATUS pexBarIsValid(MV_U32 baseLow, MV_U32 size);
+
+static MV_BOOL pexIsWinWithinBar(MV_U32 pexIf,MV_ADDR_WIN *pAddrWin);
+static MV_BOOL pexBarOverlapDetect(MV_U32 pexIf,MV_U32 barNum,
+								   MV_ADDR_WIN *pAddrWin);
+const MV_8* pexBarNameGet( MV_U32 bar );
+
+
+/*******************************************************************************
+* mvPexInit - Initialize PEX interfaces
+*
+* DESCRIPTION:
+*
+* This function is responsible of intialization of the Pex Interface , It 
+* configure the Pex Bars and Windows in the following manner:
+*
+*  Assumptions : 
+*				Bar0 is always internal registers bar
+*			    Bar1 is always the DRAM bar
+*				Bar2 is always the Device bar
+*
+*  1) Sets the Internal registers bar base by obtaining the base from
+*	  the CPU Interface
+*  2) Sets the DRAM bar base and size by getting the base and size from
+*     the CPU Interface when the size is the sum of all enabled DRAM 
+*	  chip selects and the base is the base of CS0 .
+*  3) Sets the Device bar base and size by getting these values from the 
+*     CPU Interface when the base is the base of the lowest base of the
+*     Device chip selects, and the 
+*
+*
+* INPUT:
+*
+*       pexIf   -  PEX interface number.
+*
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_OK if function success otherwise MV_ERROR or MV_BAD_PARAM
+*
+*******************************************************************************/
+MV_STATUS mvPexInit(MV_U32 pexIf, MV_PEX_TYPE pexType)
+{
+	MV_U32 	       		bar;
+	MV_U32		   	winNum;
+	MV_PEX_BAR	  	pexBar;
+	MV_PEX_DEC_WIN 		pexWin;
+	MV_CPU_DEC_WIN 		addrDecWin;
+	MV_TARGET 		target;
+	MV_U32			pexCurrWin=0;
+	MV_U32			status;
+	/* default and exapntion rom 
+	are always configured */
+
+#ifndef MV_DISABLE_PEX_DEVICE_BAR
+	MV_U32		   	winIndex;
+	MV_U32 		    	maxBase=0, sizeOfMaxBase=0;
+	MV_U32			pexStartWindow;
+#endif
+
+	/* Parameter checking   */
+	if(pexIf >= mvCtrlPexMaxIfGet())
+	{
+		mvOsPrintf("mvPexInit: ERR. Invalid PEX interface %d\n", pexIf);
+		return MV_BAD_PARAM;
+	}
+	
+	/* Enabled CPU access to PCI-Express */
+	mvCpuIfEnablePex(pexIf, pexType);
+
+    /* Start with bars */
+	/* First disable all PEX bars*/
+	for (bar = 0; bar < PEX_MAX_BARS; bar++)
+    {
+		if (PEX_INTER_REGS_BAR != bar)
+		{
+			if (MV_OK != mvPexBarEnable(pexIf, bar, MV_FALSE))
+			{
+				mvOsPrintf("mvPexInit:mvPexBarEnable bar =%d failed \n",bar);
+				return MV_ERROR;
+			}
+			
+		}
+
+	}
+
+	/* and disable all PEX target windows  */
+	for (winNum = 0; winNum < PEX_MAX_TARGET_WIN - 2; winNum++)
+    {
+		if (MV_OK != mvPexTargetWinEnable(pexIf, winNum, MV_FALSE))
+		{
+			mvOsPrintf("mvPexInit:mvPexTargetWinEnable winNum =%d failed \n",
+					   winNum);
+			return MV_ERROR;
+
+		}
+	}
+
+	/* Now, go through all bars*/
+
+
+
+/******************************************************************************/
+/*                       Internal registers bar                               */
+/******************************************************************************/
+	bar = PEX_INTER_REGS_BAR;
+
+	/* we only open the bar , no need to open windows for this bar */
+
+	/* first get the CS attribute from the CPU Interface */
+	if (MV_OK !=mvCpuIfTargetWinGet(INTER_REGS,&addrDecWin))
+	{
+		mvOsPrintf("mvPexInit: ERR. mvCpuIfTargetWinGet failed target =%d\n",INTER_REGS);
+		return MV_ERROR;
+	}
+
+	pexBar.addrWin.baseHigh = addrDecWin.addrWin.baseHigh;
+	pexBar.addrWin.baseLow = addrDecWin.addrWin.baseLow;
+	pexBar.addrWin.size = addrDecWin.addrWin.size;
+	pexBar.enable = MV_TRUE;
+
+	if (MV_OK != mvPexBarSet(pexIf, bar, &pexBar))
+	{
+		mvOsPrintf("mvPexInit: ERR. mvPexBarSet %d failed\n", bar);
+		return MV_ERROR;
+	}
+	
+/******************************************************************************/
+/*                                DRAM bar                                    */
+/******************************************************************************/
+
+	bar = PEX_DRAM_BAR;
+
+	pexBar.addrWin.size = 0;
+	
+	for (target = SDRAM_CS0;target < MV_DRAM_MAX_CS; target++ )
+	{
+
+		status = mvCpuIfTargetWinGet(target,&addrDecWin);
+
+		if((MV_NO_SUCH == status)&&(target != SDRAM_CS0))
+		{
+			continue;
+		}
+
+		/* first get attributes from CPU If */
+		if (MV_OK != status)
+		{
+			mvOsPrintf("mvPexInit: ERR. mvCpuIfTargetWinGet failed target =%d\n",target);
+			return MV_ERROR;
+		}
+		if (addrDecWin.enable == MV_TRUE)
+		{				
+			/* the base is the base of DRAM CS0 always */
+			if (SDRAM_CS0 == target )
+			{
+				pexBar.addrWin.baseHigh = addrDecWin.addrWin.baseHigh;
+				pexBar.addrWin.baseLow = addrDecWin.addrWin.baseLow;
+
+			}
+
+			/* increment the bar size to be the sum of the size of all
+			DRAM chips selecs */
+			pexBar.addrWin.size += addrDecWin.addrWin.size;
+
+			/* set a Pex window for this target ! 
+			DRAM CS always will have a Pex Window , and is not a 
+			part of the priority table */
+			pexWin.addrWin.baseHigh = addrDecWin.addrWin.baseHigh;
+			pexWin.addrWin.baseLow = addrDecWin.addrWin.baseLow;
+			pexWin.addrWin.size = addrDecWin.addrWin.size;
+			
+			/* we disable the windows at first because we are not
+			sure that it is witihin bar boundries */
+			pexWin.enable =MV_FALSE;
+			pexWin.target = target;
+			pexWin.targetBar = bar;
+
+			if (MV_OK != mvPexTargetWinSet(pexIf,pexCurrWin++,&pexWin))
+			{
+				mvOsPrintf("mvPexInit: ERR. mvPexTargetWinSet failed\n");
+				return MV_ERROR;
+			}
+		}
+	}
+
+	/* check if the size of the bar is illeggal */
+	if (-1 == ctrlSizeToReg(pexBar.addrWin.size, PXBCR_BAR_SIZE_ALIGNMENT))
+	{
+		/* try to get a good size */
+		pexBar.addrWin.size = ctrlSizeRegRoundUp(pexBar.addrWin.size,
+												 PXBCR_BAR_SIZE_ALIGNMENT);
+	}
+    
+	/* check if the size and base are valid */
+	if (MV_TRUE == pexBarOverlapDetect(pexIf,bar,&pexBar.addrWin))
+	{
+		mvOsPrintf("mvPexInit:Warning :Bar %d size is illigal\n",bar);
+		mvOsPrintf("it will be disabled\n");
+		mvOsPrintf("please check Pex and CPU windows configuration\n");
+	}
+	else
+	{
+		pexBar.enable = MV_TRUE;
+        
+		/* configure the bar */
+		if (MV_OK != mvPexBarSet(pexIf, bar, &pexBar))
+		{
+			mvOsPrintf("mvPexInit: ERR. mvPexBarSet %d failed\n", bar);
+			return MV_ERROR;
+		}
+	
+		/* after the bar was configured then we enable the Pex windows*/
+		for (winNum = 0;winNum < pexCurrWin ;winNum++)
+		{
+			if (MV_OK != mvPexTargetWinEnable(pexIf, winNum, MV_TRUE))
+			{
+				mvOsPrintf("mvPexInit: Can't enable window =%d\n",winNum);
+				return MV_ERROR;
+			}
+	
+		}
+	}
+
+/******************************************************************************/
+/*                              DEVICE bar                                    */
+/******************************************************************************/
+
+/* Open the Device BAR for non linux only */
+#ifndef MV_DISABLE_PEX_DEVICE_BAR 
+
+	/* then device  bar*/
+	bar = PEX_DEVICE_BAR;
+
+	/* save the starting window */
+	pexStartWindow = pexCurrWin;
+	pexBar.addrWin.size = 0;
+	pexBar.addrWin.baseLow = 0xffffffff;
+	pexBar.addrWin.baseHigh = 0;
+	maxBase = 0;
+
+	for (target = DEV_TO_TARGET(START_DEV_CS);target < DEV_TO_TARGET(MV_DEV_MAX_CS); target++ )
+	{
+		status = mvCpuIfTargetWinGet(target,&addrDecWin);
+
+		if (MV_NO_SUCH == status)
+		{
+			continue;
+		}
+
+		if (MV_OK != status)
+		{
+			mvOsPrintf("mvPexInit: ERR. mvCpuIfTargetWinGet failed target =%d\n",target);
+			return MV_ERROR;
+		}
+
+		if (addrDecWin.enable == MV_TRUE)
+		{				
+			/* get the minimum base */
+			if (addrDecWin.addrWin.baseLow < pexBar.addrWin.baseLow)
+			{
+				pexBar.addrWin.baseLow = addrDecWin.addrWin.baseLow;
+			}
+
+			/* get the maximum base */
+			if (addrDecWin.addrWin.baseLow > maxBase)
+			{
+				maxBase = addrDecWin.addrWin.baseLow;
+				sizeOfMaxBase = addrDecWin.addrWin.size;
+			}
+
+			/* search in the priority table for this target */
+			for (winIndex = 0; pexDevBarPrioTable[winIndex] != TBL_TERM;
+				 winIndex++)
+			{
+				if (pexDevBarPrioTable[winIndex] != target)
+				{
+					continue;
+				}
+				else if (pexDevBarPrioTable[winIndex] == target)
+				{
+					/*found it */
+
+					/* if the index of this target in the prio table is valid 
+					then we set the Pex window for this target, a valid index is 
+					an index that is lower than the number of the windows that
+					was not configured yet */
+
+					/* we subtract 2 always because the default and expantion
+					rom windows are always configured */
+					if ( pexCurrWin  < PEX_MAX_TARGET_WIN - 2)
+					{
+						/* set a Pex window for this target !  */
+						pexWin.addrWin.baseHigh = addrDecWin.addrWin.baseHigh;
+						pexWin.addrWin.baseLow = addrDecWin.addrWin.baseLow;
+						pexWin.addrWin.size = addrDecWin.addrWin.size;
+						
+						/* we disable the windows at first because we are not
+						sure that it is witihin bar boundries */
+						pexWin.enable = MV_FALSE;
+						pexWin.target = target;
+						pexWin.targetBar = bar;
+
+						if (MV_OK != mvPexTargetWinSet(pexIf,pexCurrWin++,
+													   &pexWin))
+						{
+							mvOsPrintf("mvPexInit: ERR. Window Set failed\n");
+							return MV_ERROR;
+						}
+					}
+				}
+			}
+		}
+	}
+
+	pexBar.addrWin.size = maxBase - pexBar.addrWin.baseLow + sizeOfMaxBase;
+	pexBar.enable = MV_TRUE;
+
+	/* check if the size of the bar is illegal */
+	if (-1 == ctrlSizeToReg(pexBar.addrWin.size, PXBCR_BAR_SIZE_ALIGNMENT))
+	{
+		/* try to get a good size */
+		pexBar.addrWin.size = ctrlSizeRegRoundUp(pexBar.addrWin.size,
+												 PXBCR_BAR_SIZE_ALIGNMENT);
+	}
+
+	/* check if the size and base are valid */
+	if (MV_TRUE == pexBarOverlapDetect(pexIf,bar,&pexBar.addrWin))
+	{
+		mvOsPrintf("mvPexInit:Warning :Bar %d size is illigal\n",bar);
+		mvOsPrintf("it will be disabled\n");
+		mvOsPrintf("please check Pex and CPU windows configuration\n");
+	}
+	else
+	{
+		if (MV_OK != mvPexBarSet(pexIf, bar, &pexBar))
+		{
+			mvOsPrintf("mvPexInit: ERR. mvPexBarSet %d failed\n", bar);
+			return MV_ERROR;
+		}
+
+		/* now enable the windows */
+		for (winNum = pexStartWindow; winNum < pexCurrWin ; winNum++)
+		{
+			if (MV_OK != mvPexTargetWinEnable(pexIf, winNum, MV_TRUE))
+			{
+				mvOsPrintf("mvPexInit:mvPexTargetWinEnable winNum =%d failed \n",
+						   winNum);
+				return MV_ERROR;
+			}
+		}
+	}
+
+#endif
+
+	return mvPexHalInit(pexIf, pexType);
+
+}
+
+/*******************************************************************************
+* mvPexTargetWinSet - Set PEX to peripheral target address window BAR
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*       N/A
+*
+* RETURN:
+*       MV_OK if PEX BAR target window was set correctly, 
+*		MV_BAD_PARAM on bad params 
+*       MV_ERROR otherwise 
+*       (e.g. address window overlapps with other active PEX target window).
+*
+*******************************************************************************/
+MV_STATUS mvPexTargetWinSet(MV_U32 pexIf, MV_U32 winNum, 
+                            MV_PEX_DEC_WIN *pAddrDecWin)
+{
+
+	MV_DEC_REGS decRegs;
+	PEX_WIN_REG_INFO winRegInfo;
+	MV_TARGET_ATTRIB targetAttribs;
+
+	/* Parameter checking   */
+	if(pexIf >= mvCtrlPexMaxIfGet())
+	{
+		mvOsPrintf("mvPexTargetWinSet: ERR. Invalid PEX interface %d\n", pexIf);
+		return MV_BAD_PARAM;
+	}
+
+	if (winNum >= PEX_MAX_TARGET_WIN)
+	{
+		mvOsPrintf("mvPexTargetWinSet: ERR. Invalid PEX winNum %d\n", winNum);
+		return MV_BAD_PARAM;
+
+	}
+
+	/* get the pex Window registers offsets */
+	pexWinRegInfoGet(pexIf,winNum,&winRegInfo);
+
+
+	if (MV_TRUE == pAddrDecWin->enable)
+	{
+
+		/* 2) Check if the requested window overlaps with current windows  */
+		if (MV_TRUE == pexWinOverlapDetect(pexIf,winNum, &pAddrDecWin->addrWin))
+		{
+			mvOsPrintf("mvPexTargetWinSet: ERR. Target %d overlap\n", winNum);
+			return MV_BAD_PARAM;
+		}
+	
+		/* 2) Check if the requested window overlaps with current windows  */
+		if (MV_FALSE == pexIsWinWithinBar(pexIf,&pAddrDecWin->addrWin))
+		{
+			mvOsPrintf("mvPexTargetWinSet: Win %d should be in bar boundries\n",
+					   winNum);
+			return MV_BAD_PARAM;
+		}
+
+	}
+
+
+
+	/* read base register*/
+	
+	if (winRegInfo.baseLowRegOffs)
+	{
+		decRegs.baseReg = MV_REG_READ(winRegInfo.baseLowRegOffs);
+	}
+	else
+	{
+		decRegs.baseReg = 0;
+	}
+
+	if (winRegInfo.sizeRegOffs)
+	{
+		decRegs.sizeReg = MV_REG_READ(winRegInfo.sizeRegOffs);
+	}
+	else
+	{
+		decRegs.sizeReg =0;
+	}
+	
+	if (MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs))
+	{
+		mvOsPrintf("mvPexTargetWinSet:mvCtrlAddrDecToReg Failed\n");
+		return MV_ERROR;		
+	}
+
+	/* enable\Disable */
+	if (MV_TRUE == pAddrDecWin->enable)
+	{
+		decRegs.sizeReg |= PXWCR_WIN_EN;
+	}
+	else
+	{
+		decRegs.sizeReg &= ~PXWCR_WIN_EN;
+	}
+
+
+	/* clear bit location */
+	decRegs.sizeReg &= ~PXWCR_WIN_BAR_MAP_MASK;
+
+	/* set bar Mapping */
+	if (pAddrDecWin->targetBar == 1)
+	{
+		decRegs.sizeReg |= PXWCR_WIN_BAR_MAP_BAR1;
+	}
+	else if (pAddrDecWin->targetBar == 2)
+	{
+		decRegs.sizeReg |= PXWCR_WIN_BAR_MAP_BAR2;
+	}
+
+	mvCtrlAttribGet(pAddrDecWin->target,&targetAttribs);
+
+	/* set attributes */
+	decRegs.sizeReg &= ~PXWCR_ATTRIB_MASK;
+	decRegs.sizeReg |= targetAttribs.attrib << PXWCR_ATTRIB_OFFS;
+	/* set target ID */
+	decRegs.sizeReg &= ~PXWCR_TARGET_MASK;
+	decRegs.sizeReg |= targetAttribs.targetId << PXWCR_TARGET_OFFS;
+
+
+	/* 3) Write to address decode Base Address Register                   */
+
+	if (winRegInfo.baseLowRegOffs)
+	{
+		MV_REG_WRITE(winRegInfo.baseLowRegOffs, decRegs.baseReg);
+	}
+
+	/* write size reg */
+	if (winRegInfo.sizeRegOffs)
+	{
+		if ((MV_PEX_WIN_DEFAULT == winNum)||
+			(MV_PEX_WIN_EXP_ROM == winNum))
+		{
+			/* clear size because there is no size field*/
+			decRegs.sizeReg &= ~PXWCR_SIZE_MASK;
+
+			/* clear enable because there is no enable field*/
+			decRegs.sizeReg &= ~PXWCR_WIN_EN;
+
+		}
+
+		MV_REG_WRITE(winRegInfo.sizeRegOffs, decRegs.sizeReg);
+	}
+
+
+    return MV_OK;
+
+}
+
+/*******************************************************************************
+* mvPexTargetWinGet - Get PEX to peripheral target address window
+*
+* DESCRIPTION:
+*		Get the PEX to peripheral target address window BAR.
+*
+* INPUT:
+*       pexIf - PEX interface number.
+*       bar   - BAR to be accessed by slave.
+*
+* OUTPUT:
+*       pAddrBarWin - PEX target window information data structure.
+*
+* RETURN:
+*       MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPexTargetWinGet(MV_U32 pexIf, MV_U32 winNum, 
+                            MV_PEX_DEC_WIN *pAddrDecWin)
+{
+	MV_TARGET_ATTRIB targetAttrib;
+	MV_DEC_REGS decRegs;
+
+	PEX_WIN_REG_INFO winRegInfo;
+
+	/* Parameter checking   */
+	if(pexIf >= mvCtrlPexMaxIfGet())
+	{
+		mvOsPrintf("mvPexTargetWinGet: ERR. Invalid PEX interface %d\n", pexIf);
+		return MV_BAD_PARAM;
+	}
+
+	if (winNum >= PEX_MAX_TARGET_WIN)
+	{
+		mvOsPrintf("mvPexTargetWinGet: ERR. Invalid PEX winNum %d\n", winNum);
+		return MV_BAD_PARAM;
+
+	}
+
+	/* get the pex Window registers offsets */
+	pexWinRegInfoGet(pexIf,winNum,&winRegInfo);
+
+	/* read base register*/
+	if (winRegInfo.baseLowRegOffs)
+	{
+		decRegs.baseReg = MV_REG_READ(winRegInfo.baseLowRegOffs);
+	}
+	else
+	{
+		decRegs.baseReg = 0;
+	}
+
+	/* read size reg */
+	if (winRegInfo.sizeRegOffs)
+	{
+		decRegs.sizeReg = MV_REG_READ(winRegInfo.sizeRegOffs);
+	}
+	else
+	{
+		decRegs.sizeReg =0;
+	}
+
+	if (MV_OK != mvCtrlRegToAddrDec(&decRegs,&(pAddrDecWin->addrWin)))
+	{
+		mvOsPrintf("mvPexTargetWinGet: mvCtrlRegToAddrDec Failed \n");
+		return MV_ERROR;
+
+	}
+
+	if (decRegs.sizeReg & PXWCR_WIN_EN)
+	{
+		pAddrDecWin->enable = MV_TRUE;
+	}
+	else
+	{
+		pAddrDecWin->enable = MV_FALSE;	  
+
+	}
+
+
+	#if 0
+    if (-1 == pAddrDecWin->addrWin.size)
+	{
+		return MV_ERROR;
+	}
+	#endif
+
+
+	/* get target bar */
+	if ((decRegs.sizeReg & PXWCR_WIN_BAR_MAP_MASK) == PXWCR_WIN_BAR_MAP_BAR1 )
+	{
+		pAddrDecWin->targetBar = 1;
+	} 
+	else if ((decRegs.sizeReg & PXWCR_WIN_BAR_MAP_MASK) == 
+			 PXWCR_WIN_BAR_MAP_BAR2 )
+	{
+		pAddrDecWin->targetBar = 2;
+	}
+
+	/* attrib and targetId */
+	pAddrDecWin->attrib = (decRegs.sizeReg & PXWCR_ATTRIB_MASK) >> 
+													PXWCR_ATTRIB_OFFS;
+	pAddrDecWin->targetId = (decRegs.sizeReg & PXWCR_TARGET_MASK) >> 
+													PXWCR_TARGET_OFFS;
+
+	targetAttrib.attrib = pAddrDecWin->attrib;
+	targetAttrib.targetId = pAddrDecWin->targetId;
+
+	pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib);
+
+	return MV_OK;
+
+}
+
+
+/*******************************************************************************
+* mvPexTargetWinEnable - Enable/disable a PEX BAR window
+*
+* DESCRIPTION:
+*       This function enable/disable a PEX BAR window.
+*       if parameter 'enable' == MV_TRUE the routine will enable the 
+*       window, thus enabling PEX accesses for that BAR (before enabling the 
+*       window it is tested for overlapping). Otherwise, the window will 
+*       be disabled.
+*
+* INPUT:
+*       pexIf  - PEX interface number.
+*       bar    - BAR to be accessed by slave.
+*       enable - Enable/disable parameter.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPexTargetWinEnable(MV_U32 pexIf,MV_U32 winNum, MV_BOOL enable)
+{
+	PEX_WIN_REG_INFO winRegInfo;
+	MV_PEX_DEC_WIN addrDecWin;
+
+	/* Parameter checking   */
+	if(pexIf >= mvCtrlPexMaxIfGet())
+	{
+		mvOsPrintf("mvPexTargetWinEnable: ERR. Invalid PEX If %d\n", pexIf);
+		return MV_BAD_PARAM;
+	}
+
+	if (winNum >= PEX_MAX_TARGET_WIN)
+	{
+		mvOsPrintf("mvPexTargetWinEnable ERR. Invalid PEX winNum %d\n", winNum);
+		return MV_BAD_PARAM;
+
+	}
+
+
+	/* get the pex Window registers offsets */
+	pexWinRegInfoGet(pexIf,winNum,&winRegInfo);
+
+
+	/* if the address windows is disabled , we only disable the appropriare
+	pex window and ignore other settings */
+
+	if (MV_FALSE == enable)
+	{
+
+		/* this is not relevant to default and expantion rom
+		windows */
+		if (winRegInfo.sizeRegOffs)
+		{
+			if ((MV_PEX_WIN_DEFAULT != winNum)&&
+				(MV_PEX_WIN_EXP_ROM != winNum))
+			{
+				MV_REG_BIT_RESET(winRegInfo.sizeRegOffs, PXWCR_WIN_EN);
+			}
+		}
+
+	}
+	else
+	{
+		if (MV_OK != mvPexTargetWinGet(pexIf,winNum, &addrDecWin))
+		{
+			mvOsPrintf("mvPexTargetWinEnable: mvPexTargetWinGet Failed\n");
+			return MV_ERROR;
+		}
+
+		/* Check if the requested window overlaps with current windows	*/
+		if (MV_TRUE == pexWinOverlapDetect(pexIf,winNum, &addrDecWin.addrWin))
+		{
+			mvOsPrintf("mvPexTargetWinEnable: ERR. Target %d overlap\n", winNum);
+			return MV_BAD_PARAM;
+		}
+
+		if (MV_FALSE == pexIsWinWithinBar(pexIf,&addrDecWin.addrWin))
+		{
+			mvOsPrintf("mvPexTargetWinEnable: Win %d should be in bar boundries\n",
+					   winNum);
+			return MV_BAD_PARAM;
+		}
+
+
+		/* this is not relevant to default and expantion rom
+		windows */
+		if (winRegInfo.sizeRegOffs)
+		{
+			if ((MV_PEX_WIN_DEFAULT != winNum)&&
+				(MV_PEX_WIN_EXP_ROM != winNum))
+			{
+				MV_REG_BIT_SET(winRegInfo.sizeRegOffs, PXWCR_WIN_EN);
+			}
+		}
+
+
+	}
+
+	return MV_OK;
+
+}
+
+
+
+/*******************************************************************************
+* mvPexTargetWinRemap - Set PEX to target address window remap.
+*
+* DESCRIPTION:
+*       The PEX interface supports remap of the BAR original address window.
+*       For each BAR it is possible to define a remap address. For example
+*       an address 0x12345678 that hits BAR 0x10 (SDRAM CS[0]) will be modified
+*       according to remap register but will also be targeted to the 
+*       SDRAM CS[0].
+*
+* INPUT:
+*       pexIf    - PEX interface number.
+*       bar      - Peripheral target enumerator accessed by slave.
+*       pAddrWin - Address window to be checked.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPexTargetWinRemap(MV_U32 pexIf, MV_U32 winNum, 
+                           MV_PEX_REMAP_WIN *pAddrWin)
+{
+
+	PEX_WIN_REG_INFO winRegInfo;
+	
+	/* Parameter checking   */
+	if (pexIf >= mvCtrlPexMaxIfGet())
+	{
+		mvOsPrintf("mvPexTargetWinRemap: ERR. Invalid PEX interface num %d\n", 
+																		pexIf);
+		return MV_BAD_PARAM;
+	}
+	if (MV_PEX_WIN_DEFAULT == winNum)
+	{
+		mvOsPrintf("mvPexTargetWinRemap: ERR. Invalid PEX win num %d\n", 
+																		winNum);
+		return MV_BAD_PARAM;
+
+	}
+
+	if (MV_IS_NOT_ALIGN(pAddrWin->addrWin.baseLow, PXWRR_REMAP_ALIGNMENT))
+	{
+		mvOsPrintf("mvPexTargetWinRemap: Error remap PEX interface %d win %d."\
+				   "\nAddress 0x%08x is unaligned to size 0x%x.\n",
+				   pexIf,
+				   winNum,
+                   pAddrWin->addrWin.baseLow,
+				   pAddrWin->addrWin.size);
+		
+		return MV_ERROR;
+	}
+
+	pexWinRegInfoGet(pexIf, winNum, &winRegInfo);
+
+	/* Set remap low register value */
+	MV_REG_WRITE(winRegInfo.remapLowRegOffs, pAddrWin->addrWin.baseLow);
+	
+	/* Skip base high settings if the BAR has only base low (32-bit)		*/
+	if (0 != winRegInfo.remapHighRegOffs)
+	{
+		MV_REG_WRITE(winRegInfo.remapHighRegOffs, pAddrWin->addrWin.baseHigh);
+	}
+
+
+	if (pAddrWin->enable == MV_TRUE)
+	{
+		MV_REG_BIT_SET(winRegInfo.remapLowRegOffs,PXWRR_REMAP_EN);
+	}
+	else
+	{
+		MV_REG_BIT_RESET(winRegInfo.remapLowRegOffs,PXWRR_REMAP_EN);
+	}
+
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvPexTargetWinRemapEnable - 
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+*       MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+
+MV_STATUS mvPexTargetWinRemapEnable(MV_U32 pexIf, MV_U32 winNum, 
+                           MV_BOOL enable)
+{
+	PEX_WIN_REG_INFO winRegInfo;
+	
+	/* Parameter checking   */
+	if (pexIf >= mvCtrlPexMaxIfGet())
+	{
+		mvOsPrintf("mvPexTargetWinRemap: ERR. Invalid PEX interface num %d\n", 
+																		pexIf);
+		return MV_BAD_PARAM;
+	}
+	if (MV_PEX_WIN_DEFAULT == winNum)
+	{
+		mvOsPrintf("mvPexTargetWinRemap: ERR. Invalid PEX win num %d\n", 
+																		winNum);
+		return MV_BAD_PARAM;
+
+	}
+
+
+	pexWinRegInfoGet(pexIf, winNum, &winRegInfo);
+
+	if (enable == MV_TRUE)
+	{
+		MV_REG_BIT_SET(winRegInfo.remapLowRegOffs,PXWRR_REMAP_EN);
+	}
+	else
+	{
+		MV_REG_BIT_RESET(winRegInfo.remapLowRegOffs,PXWRR_REMAP_EN);
+	}
+
+	return MV_OK;
+
+}
+
+/*******************************************************************************
+*  mvPexBarSet - Set PEX bar address and size 
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPexBarSet(MV_U32 pexIf,
+						MV_U32 barNum,
+						MV_PEX_BAR *pAddrWin)
+{
+	MV_U32 regBaseLow;
+	MV_U32 regSize,sizeToReg;
+
+
+	/* check parameters */
+	if(pexIf >= mvCtrlPexMaxIfGet())
+	{
+		mvOsPrintf("mvPexBarSet: ERR. Invalid PEX interface %d\n", pexIf);
+		return MV_BAD_PARAM;
+	}
+
+	if(barNum >= PEX_MAX_BARS)
+	{
+		mvOsPrintf("mvPexBarSet: ERR. Invalid bar number %d\n", barNum);
+		return MV_BAD_PARAM;
+	}
+	
+
+	if (pAddrWin->addrWin.size == 0)
+	{
+		mvOsPrintf("mvPexBarSet: Size zero is Illigal\n" );
+		return MV_BAD_PARAM;
+	}
+
+
+	/* Check if the window complies with PEX spec							*/
+	if (MV_TRUE != pexBarIsValid(pAddrWin->addrWin.baseLow,
+								 pAddrWin->addrWin.size))
+	{
+        mvOsPrintf("mvPexBarSet: ERR. Target %d window invalid\n", barNum);
+		return MV_BAD_PARAM;
+	}
+
+    /* 2) Check if the requested bar overlaps with current bars		*/
+    if (MV_TRUE == pexBarOverlapDetect(pexIf,barNum, &pAddrWin->addrWin))
+	{
+        mvOsPrintf("mvPexBarSet: ERR. Target %d overlap\n", barNum);
+		return MV_BAD_PARAM;
+	}
+
+	/* Get size register value according to window size						*/
+	sizeToReg = ctrlSizeToReg(pAddrWin->addrWin.size, PXBCR_BAR_SIZE_ALIGNMENT);
+	
+	/* Read bar size */
+	if (PEX_INTER_REGS_BAR != barNum) /* internal registers have no size */
+	{
+		regSize = MV_REG_READ(PEX_BAR_CTRL_REG(pexIf,barNum));
+
+		/* Size parameter validity check.                                   */
+		if (-1 == sizeToReg)
+		{
+			mvOsPrintf("mvPexBarSet: ERR. Target BAR %d size invalid.\n",barNum);
+			return MV_BAD_PARAM;
+		}
+	
+		regSize &= ~PXBCR_BAR_SIZE_MASK;
+		regSize |= (sizeToReg << PXBCR_BAR_SIZE_OFFS) ;
+	
+		MV_REG_WRITE(PEX_BAR_CTRL_REG(pexIf,barNum),regSize);
+
+	}
+
+	/* set size */
+
+
+
+	/* Read base address low */
+	regBaseLow = MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf,
+												   PEX_MV_BAR_BASE(barNum)));
+
+	/* clear current base */
+	if (PEX_INTER_REGS_BAR == barNum)
+	{
+		regBaseLow &= ~PXBIR_BASE_MASK;
+        regBaseLow |= (pAddrWin->addrWin.baseLow & PXBIR_BASE_MASK);
+	}
+	else
+	{
+		regBaseLow &= ~PXBR_BASE_MASK;
+		regBaseLow |= (pAddrWin->addrWin.baseLow & PXBR_BASE_MASK);
+	}
+
+	/* if we had a previous value that contain the bar type (MeM\IO), we want to
+	restore it */
+	regBaseLow |= PEX_BAR_DEFAULT_ATTRIB;
+
+
+
+	/* write base low */
+    MV_REG_WRITE(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_MV_BAR_BASE(barNum)),
+				regBaseLow);
+
+	if (pAddrWin->addrWin.baseHigh != 0)
+	{
+		/* Read base address high */
+		MV_REG_WRITE(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_MV_BAR_BASE_HIGH(barNum)),
+								 pAddrWin->addrWin.baseHigh);
+
+	}
+
+	/* lastly enable the Bar */
+	if (pAddrWin->enable == MV_TRUE)
+	{
+		if (PEX_INTER_REGS_BAR != barNum) /* internal registers 
+												are enabled always */
+		{
+			MV_REG_BIT_SET(PEX_BAR_CTRL_REG(pexIf,barNum),PXBCR_BAR_EN);
+		}
+	}
+	else if (MV_FALSE == pAddrWin->enable)
+	{
+		if (PEX_INTER_REGS_BAR != barNum) /* internal registers 
+												are enabled always */
+		{
+			MV_REG_BIT_RESET(PEX_BAR_CTRL_REG(pexIf,barNum),PXBCR_BAR_EN);
+		}
+
+	}
+
+
+
+	return MV_OK;
+}
+
+
+/*******************************************************************************
+*  mvPexBarGet - Get PEX bar address and size
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+
+MV_STATUS mvPexBarGet(MV_U32 pexIf,
+								MV_U32 barNum,
+								MV_PEX_BAR *pAddrWin)
+{
+	/* check parameters */
+	if(pexIf >= mvCtrlPexMaxIfGet())
+	{
+		mvOsPrintf("mvPexBarGet: ERR. Invalid PEX interface %d\n", pexIf);
+		return MV_BAD_PARAM;
+	}
+
+	if(barNum >= PEX_MAX_BARS)
+	{
+		mvOsPrintf("mvPexBarGet: ERR. Invalid bar number %d\n", barNum);
+		return MV_BAD_PARAM;
+	}
+
+	/* read base low */
+	pAddrWin->addrWin.baseLow = 
+		MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_MV_BAR_BASE(barNum)));
+
+
+	if (PEX_INTER_REGS_BAR == barNum)
+	{
+		pAddrWin->addrWin.baseLow &= PXBIR_BASE_MASK;
+	}
+	else
+	{
+		pAddrWin->addrWin.baseLow &= PXBR_BASE_MASK;
+	}
+
+
+	/* read base high */
+	pAddrWin->addrWin.baseHigh = 
+		MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_MV_BAR_BASE_HIGH(barNum)));
+
+
+	/* Read bar size */
+	if (PEX_INTER_REGS_BAR != barNum) /* internal registers have no size */
+	{
+		pAddrWin->addrWin.size = MV_REG_READ(PEX_BAR_CTRL_REG(pexIf,barNum));
+
+		/* check if enable or not */
+		if (pAddrWin->addrWin.size & PXBCR_BAR_EN)
+		{
+			pAddrWin->enable = MV_TRUE;
+		}
+		else
+		{
+			pAddrWin->enable = MV_FALSE;
+		}
+			
+		/* now get the size */
+		pAddrWin->addrWin.size &= PXBCR_BAR_SIZE_MASK;
+		pAddrWin->addrWin.size >>= PXBCR_BAR_SIZE_OFFS;
+
+		pAddrWin->addrWin.size = ctrlRegToSize(pAddrWin->addrWin.size,
+											   PXBCR_BAR_SIZE_ALIGNMENT);
+
+	}
+	else /* PEX_INTER_REGS_BAR */
+	{
+		pAddrWin->addrWin.size = INTER_REGS_SIZE;
+		pAddrWin->enable = MV_TRUE;
+	}
+
+
+	return MV_OK;
+}
+
+/*******************************************************************************
+*  mvPexBarEnable - 
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+
+
+MV_STATUS mvPexBarEnable(MV_U32 pexIf, MV_U32 barNum, MV_BOOL enable)
+{
+
+	MV_PEX_BAR pexBar;
+
+	/* check parameters */
+	if(pexIf >= mvCtrlPexMaxIfGet())
+	{
+		mvOsPrintf("mvPexBarEnable: ERR. Invalid PEX interface %d\n", pexIf);
+		return MV_BAD_PARAM;
+	}
+
+
+	if(barNum >= PEX_MAX_BARS)
+	{
+		mvOsPrintf("mvPexBarEnable: ERR. Invalid bar number %d\n", barNum);
+		return MV_BAD_PARAM;
+	}
+
+    if (PEX_INTER_REGS_BAR == barNum)
+	{
+		if (MV_TRUE == enable)
+		{
+			return MV_OK;
+		}
+		else
+		{
+			return MV_ERROR;
+		}
+	}
+
+
+	if (MV_FALSE == enable)
+	{
+			/* disable bar and quit */
+			MV_REG_BIT_RESET(PEX_BAR_CTRL_REG(pexIf,barNum),PXBCR_BAR_EN);
+			return MV_OK;
+	}
+
+	/* else */
+
+	if (mvPexBarGet(pexIf,barNum,&pexBar) != MV_OK)
+	{
+		mvOsPrintf("mvPexBarEnable: mvPexBarGet Failed\n");
+		return MV_ERROR;
+
+	}
+
+	if (MV_TRUE == pexBar.enable)
+	{
+		/* it is already enabled !!! */
+		return MV_OK;
+	}
+
+	/* else enable the bar*/
+
+	pexBar.enable = MV_TRUE;
+
+	if (mvPexBarSet(pexIf,barNum,&pexBar) != MV_OK)
+	{
+		mvOsPrintf("mvPexBarEnable: mvPexBarSet Failed\n");
+		return MV_ERROR;
+
+	}
+
+	return MV_OK;
+}
+
+
+/*******************************************************************************
+* pexWinOverlapDetect - Detect address windows overlapping
+*
+* DESCRIPTION:
+*       This function detects address window overlapping of a given address 
+*       window in PEX BARs.
+*
+* INPUT:
+*       pAddrWin - Address window to be checked.
+*       bar      - BAR to be accessed by slave.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_TRUE if the given address window overlap current address
+*       decode map, MV_FALSE otherwise.
+*
+*******************************************************************************/
+static MV_BOOL pexWinOverlapDetect(MV_U32 pexIf,
+									 MV_U32 winNum,
+									 MV_ADDR_WIN *pAddrWin)
+{
+    MV_U32 		   win;
+	MV_PEX_DEC_WIN addrDecWin;
+
+	
+	for(win = 0; win < PEX_MAX_TARGET_WIN -2 ; win++)
+    {
+        /* don't check our target or illegal targets */
+        if (winNum == win)
+        {
+            continue;
+        }
+        
+		/* Get window parameters 	*/
+		if (MV_OK != mvPexTargetWinGet(pexIf, win, &addrDecWin))
+		{
+			mvOsPrintf("pexWinOverlapDetect: ERR. TargetWinGet failed win=%x\n",
+					   win);
+            return MV_ERROR;
+		}
+
+		/* Do not check disabled windows	*/
+		if (MV_FALSE == addrDecWin.enable)
+		{
+			continue;
+		}
+
+        
+        if(MV_TRUE == ctrlWinOverlapTest(pAddrWin, &addrDecWin.addrWin))
+		{                    
+			mvOsPrintf("pexWinOverlapDetect: winNum %d overlap current %d\n", 
+															winNum, win);
+			return MV_TRUE;           
+		}
+    }
+    
+	return MV_FALSE;
+}
+
+/*******************************************************************************
+* pexIsWinWithinBar - Detect if address is within PEX bar boundries
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_TRUE if the given address window overlap current address
+*       decode map, MV_FALSE otherwise.
+*
+*******************************************************************************/
+static MV_BOOL pexIsWinWithinBar(MV_U32 pexIf,
+								   MV_ADDR_WIN *pAddrWin)
+{
+    MV_U32 		   bar;
+	MV_PEX_BAR addrDecWin;
+
+	for(bar = 0; bar < PEX_MAX_BARS; bar++)
+    {
+        
+		/* Get window parameters 	*/
+		if (MV_OK != mvPexBarGet(pexIf, bar, &addrDecWin))
+		{
+			mvOsPrintf("pexIsWinWithinBar: ERR. mvPexBarGet failed\n");
+            return MV_ERROR;
+		}
+		
+		/* Do not check disabled bars	*/
+		if (MV_FALSE == addrDecWin.enable)
+		{
+			continue;
+		}
+
+        
+        if(MV_TRUE == ctrlWinWithinWinTest(pAddrWin, &addrDecWin.addrWin))
+		{                    
+			return MV_TRUE;
+		}
+    }
+    
+	return MV_FALSE;
+
+}
+
+/*******************************************************************************
+* pexBarOverlapDetect - Detect address windows overlapping
+*
+* DESCRIPTION:
+*       This function detects address window overlapping of a given address 
+*       window in PEX BARs.
+*
+* INPUT:
+*       pAddrWin - Address window to be checked.
+*       bar      - BAR to be accessed by slave.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_TRUE if the given address window overlap current address
+*       decode map, MV_FALSE otherwise.
+*
+*******************************************************************************/
+static MV_BOOL pexBarOverlapDetect(MV_U32 pexIf,
+									 MV_U32 barNum,
+									 MV_ADDR_WIN *pAddrWin)
+{
+    MV_U32 		   bar;
+	MV_PEX_BAR barDecWin;
+
+	
+	for(bar = 0; bar < PEX_MAX_BARS; bar++)
+    {
+        /* don't check our target or illegal targets */
+        if (barNum == bar)
+        {
+            continue;
+        }
+        
+		/* Get window parameters 	*/
+		if (MV_OK != mvPexBarGet(pexIf, bar, &barDecWin))
+		{
+			mvOsPrintf("pexBarOverlapDetect: ERR. TargetWinGet failed\n");
+            return MV_ERROR;
+		}
+
+		/* don'nt check disabled bars */
+        if (barDecWin.enable == MV_FALSE)
+		{
+			continue;
+		}
+
+
+        if(MV_TRUE == ctrlWinOverlapTest(pAddrWin, &barDecWin.addrWin))
+		{                    
+			mvOsPrintf("pexBarOverlapDetect: winNum %d overlap current %d\n", 
+															barNum, bar);
+			return MV_TRUE;           
+		}
+    }
+    
+	return MV_FALSE;
+}
+
+/*******************************************************************************
+* pexBarIsValid - Check if the given address window is valid
+*
+* DESCRIPTION:
+*		PEX spec restrict BAR base to be aligned to BAR size.
+*		This function checks if the given address window is valid.
+*
+* INPUT:
+*       baseLow - 32bit low base address.
+*       size    - Window size.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_TRUE if the address window is valid, MV_FALSE otherwise.
+*
+*******************************************************************************/
+static MV_STATUS pexBarIsValid(MV_U32 baseLow, MV_U32 size)
+{
+
+	/* PCI spec restrict BAR base to be aligned to BAR size					*/
+	if(MV_IS_NOT_ALIGN(baseLow, size))
+	{
+		return MV_ERROR;
+	}
+	else
+	{
+		return MV_TRUE;
+	}
+	
+	return MV_TRUE;
+}
+
+/*******************************************************************************
+* pexBarRegInfoGet - Get BAR register information
+*
+* DESCRIPTION:
+* 		PEX BARs registers offsets are inconsecutive. 
+*		This function gets a PEX BAR register information like register offsets
+*		and function location of the BAR.
+*
+* INPUT:
+*       pexIf - PEX interface number.
+*		bar	  - The PEX BAR in question.	
+*
+* OUTPUT:
+*       pBarRegInfo - BAR register info struct.
+*
+* RETURN:
+*		MV_BAD_PARAM when bad parameters ,MV_ERROR on error ,othewise MV_OK
+*
+*******************************************************************************/
+static MV_STATUS pexWinRegInfoGet(MV_U32 pexIf, 
+								  MV_U32 winNum,
+								  PEX_WIN_REG_INFO *pWinRegInfo)
+{
+
+	if ((winNum >= 0)&&(winNum <=3))
+	{
+		pWinRegInfo->baseLowRegOffs   = PEX_WIN0_3_BASE_REG(pexIf,winNum);
+		pWinRegInfo->baseHighRegOffs  = 0;
+		pWinRegInfo->sizeRegOffs      = PEX_WIN0_3_CTRL_REG(pexIf,winNum);
+		pWinRegInfo->remapLowRegOffs  = PEX_WIN0_3_REMAP_REG(pexIf,winNum);
+		pWinRegInfo->remapHighRegOffs = 0;
+	}
+	else if ((winNum >= 4)&&(winNum <=5))
+	{
+		pWinRegInfo->baseLowRegOffs   = PEX_WIN4_5_BASE_REG(pexIf,winNum);
+		pWinRegInfo->baseHighRegOffs  = 0;
+		pWinRegInfo->sizeRegOffs      = PEX_WIN4_5_CTRL_REG(pexIf,winNum);
+		pWinRegInfo->remapLowRegOffs  = PEX_WIN4_5_REMAP_REG(pexIf,winNum);
+		pWinRegInfo->remapHighRegOffs = PEX_WIN4_5_REMAP_HIGH_REG(pexIf,winNum);
+
+	}
+	else if (MV_PEX_WIN_DEFAULT == winNum)
+	{
+		pWinRegInfo->baseLowRegOffs   = 0;
+		pWinRegInfo->baseHighRegOffs  = 0;
+		pWinRegInfo->sizeRegOffs      = PEX_WIN_DEFAULT_CTRL_REG(pexIf);
+		pWinRegInfo->remapLowRegOffs  = 0;
+		pWinRegInfo->remapHighRegOffs = 0;
+	}
+	else if (MV_PEX_WIN_EXP_ROM == winNum)
+	{
+		pWinRegInfo->baseLowRegOffs   = 0;
+		pWinRegInfo->baseHighRegOffs  = 0;
+		pWinRegInfo->sizeRegOffs      = PEX_WIN_EXP_ROM_CTRL_REG(pexIf);
+		pWinRegInfo->remapLowRegOffs  = PEX_WIN_EXP_ROM_REMAP_REG(pexIf);
+		pWinRegInfo->remapHighRegOffs = 0;
+
+	}
+
+	return MV_OK;
+}
+
+/*******************************************************************************
+* pexBarNameGet - Get the string name of PEX BAR.
+*
+* DESCRIPTION:
+*		This function get the string name of PEX BAR.
+*
+* INPUT:
+*       bar - PEX bar number.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       pointer to the string name of PEX BAR.
+*
+*******************************************************************************/
+const MV_8* pexBarNameGet( MV_U32 bar )
+{
+	switch( bar ) 
+	{
+		case PEX_INTER_REGS_BAR: 
+			return "Internal Regs Bar0....";
+		case PEX_DRAM_BAR: 
+			return "DRAM Bar1.............";
+		case PEX_DEVICE_BAR: 
+			return "Devices Bar2..........";
+		default:
+			 return "Bar unknown";
+	}
+}
+/*******************************************************************************
+* mvPexAddrDecShow - Print the PEX address decode map (BARs and windows).
+*
+* DESCRIPTION:
+*		This function print the PEX address decode map (BARs and windows).
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+MV_VOID mvPexAddrDecShow(MV_VOID)
+{
+	MV_PEX_BAR pexBar;
+	MV_PEX_DEC_WIN win;
+	MV_U32 pexIf;
+	MV_U32 bar,winNum;
+
+	for( pexIf = 0; pexIf < mvCtrlPexMaxIfGet(); pexIf++ )
+	{
+		if (MV_FALSE == mvCtrlPwrClckGet(PEX_UNIT_ID, pexIf)) continue;
+		mvOsOutput( "\n" );
+		mvOsOutput( "PEX%d:\n", pexIf );
+		mvOsOutput( "-----\n" );
+
+		mvOsOutput( "\nPex Bars \n\n");
+
+		for( bar = 0; bar < PEX_MAX_BARS; bar++ ) 
+		{
+			memset( &pexBar, 0, sizeof(MV_PEX_BAR) );
+
+			mvOsOutput( "%s ", pexBarNameGet(bar) );
+
+			if( mvPexBarGet( pexIf, bar, &pexBar ) == MV_OK )
+			{
+				if( pexBar.enable )
+				{
+                    mvOsOutput( "base %08x, ", pexBar.addrWin.baseLow );
+                    mvSizePrint( pexBar.addrWin.size );
+                    mvOsOutput( "\n" );
+				}
+				else
+					mvOsOutput( "disable\n" );
+			}
+		}
+		mvOsOutput( "\nPex Decode Windows\n\n");
+
+		for( winNum = 0; winNum < PEX_MAX_TARGET_WIN - 2; winNum++)
+		{
+			memset( &win, 0,sizeof(MV_PEX_DEC_WIN) );
+
+			mvOsOutput( "win%d - ", winNum );
+
+			if ( mvPexTargetWinGet(pexIf,winNum,&win) == MV_OK)
+			{
+				if (win.enable)
+				{
+					mvOsOutput( "%s base %08x, ",
+					mvCtrlTargetNameGet(win.target), win.addrWin.baseLow );
+					mvOsOutput( "...." );
+					mvSizePrint( win.addrWin.size );
+
+					mvOsOutput( "\n" );
+				}
+				else
+					mvOsOutput( "disable\n" );
+
+
+			}
+		}
+	
+		memset( &win, 0,sizeof(MV_PEX_DEC_WIN) );
+
+		mvOsOutput( "default win - " );
+
+		if ( mvPexTargetWinGet(pexIf, MV_PEX_WIN_DEFAULT, &win) == MV_OK)
+		{
+			mvOsOutput( "%s ",
+			mvCtrlTargetNameGet(win.target) );
+			mvOsOutput( "\n" );
+		}
+		memset( &win, 0,sizeof(MV_PEX_DEC_WIN) );
+
+		mvOsOutput( "Expansion ROM - " );
+
+		if ( mvPexTargetWinGet(pexIf, MV_PEX_WIN_EXP_ROM, &win) == MV_OK)
+		{
+			mvOsOutput( "%s ",
+			mvCtrlTargetNameGet(win.target) );
+			mvOsOutput( "\n" );
+		}
+
+	}
+}
+
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysPex.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysPex.h
new file mode 100644
index 0000000000..3505613b7f
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysPex.h
@@ -0,0 +1,348 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCSysPEXH
+#define __INCSysPEXH
+
+#include "mvCommon.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "ctrlEnv/mvCtrlEnvAddrDec.h"
+
+/* 4KB granularity */
+#define MINIMUM_WINDOW_SIZE     0x1000
+#define MINIMUM_BAR_SIZE        0x1000
+#define MINIMUM_BAR_SIZE_MASK	0xFFFFF000
+#define BAR_SIZE_OFFS			12
+#define BAR_SIZE_MASK			(0xFFFFF << BAR_SIZE_OFFS)
+
+
+
+#define MV_PEX_WIN_DEFAULT		6
+#define MV_PEX_WIN_EXP_ROM		7
+#define PEX_MAX_TARGET_WIN		8
+
+
+#define PEX_MAX_BARS			3
+#define PEX_INTER_REGS_BAR		0
+#define PEX_DRAM_BAR			1
+#define PEX_DEVICE_BAR			2
+
+/*************************************/
+/* PCI Express BAR Control Registers */
+/*************************************/
+#define PEX_BAR_CTRL_REG(pexIf,bar)		(0x41804 + (bar-1)*4- (pexIf)*0x10000)
+#define PEX_EXP_ROM_BAR_CTRL_REG(pexIf)	(0x4180C - (pexIf)*0x10000)
+
+
+/* PCI Express BAR Control Register */
+/* PEX_BAR_CTRL_REG (PXBCR) */
+
+#define PXBCR_BAR_EN				BIT0
+#define PXBCR_BAR_SIZE_OFFS			16
+#define PXBCR_BAR_SIZE_MASK			(0xffff << PXBCR_BAR_SIZE_OFFS)
+#define PXBCR_BAR_SIZE_ALIGNMENT	0x10000
+
+
+
+/* PCI Express Expansion ROM BAR Control Register */
+/* PEX_EXP_ROM_BAR_CTRL_REG (PXERBCR) */
+
+#define PXERBCR_EXPROM_EN			BIT0
+#define PXERBCR_EXPROMSZ_OFFS		19
+#define PXERBCR_EXPROMSZ_MASK		(0xf << PXERBCR_EXPROMSZ_OFFS)
+#define PXERBCR_EXPROMSZ_512KB		(0x0 << PXERBCR_EXPROMSZ_OFFS)
+#define PXERBCR_EXPROMSZ_1024KB		(0x1 << PXERBCR_EXPROMSZ_OFFS)
+#define PXERBCR_EXPROMSZ_2048KB		(0x3 << PXERBCR_EXPROMSZ_OFFS)
+#define PXERBCR_EXPROMSZ_4096KB		(0x7 << PXERBCR_EXPROMSZ_OFFS)
+
+/************************************************/
+/* PCI Express Address Window Control Registers */
+/************************************************/
+#define PEX_WIN0_3_CTRL_REG(pexIf,winNum)       \
+                                (0x41820 + (winNum) * 0x10 - (pexIf) * 0x10000)
+#define PEX_WIN0_3_BASE_REG(pexIf,winNum)       \
+                                (0x41824 + (winNum) * 0x10 - (pexIf) * 0x10000)
+#define PEX_WIN0_3_REMAP_REG(pexIf,winNum)      \
+                                (0x4182C + (winNum) * 0x10 - (pexIf) * 0x10000)
+#define PEX_WIN4_5_CTRL_REG(pexIf,winNum)       \
+                            (0x41860 + (winNum - 4) * 0x20 - (pexIf) * 0x10000)
+#define PEX_WIN4_5_BASE_REG(pexIf,winNum)       \
+                            (0x41864 + (winNum - 4) * 0x20 - (pexIf) * 0x10000)
+#define PEX_WIN4_5_REMAP_REG(pexIf,winNum)      \
+                            (0x4186C + (winNum - 4) * 0x20 - (pexIf) * 0x10000)
+#define PEX_WIN4_5_REMAP_HIGH_REG(pexIf,winNum) \
+                            (0x41870 + (winNum - 4) * 0x20 - (pexIf) * 0x10000)
+
+#define PEX_WIN_DEFAULT_CTRL_REG(pexIf)         (0x418B0 - (pexIf) * 0x10000)
+#define PEX_WIN_EXP_ROM_CTRL_REG(pexIf)         (0x418C0 - (pexIf) * 0x10000)
+#define PEX_WIN_EXP_ROM_REMAP_REG(pexIf)        (0x418C4 - (pexIf) * 0x10000)
+
+/* PCI Express Window Control Register */
+/* PEX_WIN_CTRL_REG (PXWCR) */
+
+#define	PXWCR_WIN_EN					BIT0 /* Window Enable.*/
+
+#define	PXWCR_WIN_BAR_MAP_OFFS			1    /* Mapping to BAR.*/
+#define	PXWCR_WIN_BAR_MAP_MASK			BIT1
+#define	PXWCR_WIN_BAR_MAP_BAR1			(0 << PXWCR_WIN_BAR_MAP_OFFS)
+#define	PXWCR_WIN_BAR_MAP_BAR2			(1 << PXWCR_WIN_BAR_MAP_OFFS)
+
+#define	PXWCR_TARGET_OFFS				4  /*Unit ID */
+#define	PXWCR_TARGET_MASK				(0xf << PXWCR_TARGET_OFFS)
+
+#define	PXWCR_ATTRIB_OFFS				8  /* target attributes */
+#define	PXWCR_ATTRIB_MASK				(0xff << PXWCR_ATTRIB_OFFS)
+
+#define	PXWCR_SIZE_OFFS					16 /* size */
+#define	PXWCR_SIZE_MASK					(0xffff << PXWCR_SIZE_OFFS)
+#define	PXWCR_SIZE_ALIGNMENT			0x10000
+
+/* PCI Express Window Base Register */
+/* PEX_WIN_BASE_REG (PXWBR)*/
+
+#define PXWBR_BASE_OFFS					16 /* address[31:16] */
+#define PXWBR_BASE_MASK					(0xffff << PXWBR_BASE_OFFS)
+#define PXWBR_BASE_ALIGNMENT			0x10000
+
+/* PCI Express Window Remap Register */
+/* PEX_WIN_REMAP_REG (PXWRR)*/
+
+#define PXWRR_REMAP_EN					BIT0
+#define PXWRR_REMAP_OFFS				16
+#define PXWRR_REMAP_MASK				(0xffff << PXWRR_REMAP_OFFS)
+#define PXWRR_REMAP_ALIGNMENT			0x10000
+
+/* PCI Express Window Remap (High) Register */
+/* PEX_WIN_REMAP_HIGH_REG (PXWRHR)*/
+
+#define PXWRHR_REMAP_HIGH_OFFS			0
+#define PXWRHR_REMAP_HIGH_MASK			(0xffffffff << PXWRHR_REMAP_HIGH_OFFS)
+
+/* PCI Express Default Window Control Register */
+/* PEX_WIN_DEFAULT_CTRL_REG (PXWDCR) */
+
+#define	PXWDCR_TARGET_OFFS				4  /*Unit ID */
+#define	PXWDCR_TARGET_MASK				(0xf << PXWDCR_TARGET_OFFS)
+#define	PXWDCR_ATTRIB_OFFS				8  /* target attributes */
+#define	PXWDCR_ATTRIB_MASK				(0xff << PXWDCR_ATTRIB_OFFS)
+
+/* PCI Express Expansion ROM Window Control Register */
+/* PEX_WIN_EXP_ROM_CTRL_REG (PXWERCR)*/
+
+#define	PXWERCR_TARGET_OFFS				4  /*Unit ID */
+#define	PXWERCR_TARGET_MASK				(0xf << PXWERCR_TARGET_OFFS)
+#define	PXWERCR_ATTRIB_OFFS				8  /* target attributes */
+#define	PXWERCR_ATTRIB_MASK				(0xff << PXWERCR_ATTRIB_OFFS)
+
+/* PCI Express Expansion ROM Window Remap Register */
+/* PEX_WIN_EXP_ROM_REMAP_REG (PXWERRR)*/
+
+#define PXWERRR_REMAP_EN				BIT0
+#define PXWERRR_REMAP_OFFS				16
+#define PXWERRR_REMAP_MASK				(0xffff << PXWERRR_REMAP_OFFS)
+#define PXWERRR_REMAP_ALIGNMENT			0x10000
+
+
+
+/*PEX_MEMORY_BAR_BASE_ADDR(barNum) (PXMBBA)*/ 
+/* PCI Express BAR0 Internal Register*/
+/*PEX BAR0_INTER_REG (PXBIR)*/
+
+#define PXBIR_IOSPACE			BIT0	/* Memory Space Indicator */
+
+#define PXBIR_TYPE_OFFS			1	   /* BAR Type/Init Val. */ 
+#define PXBIR_TYPE_MASK			(0x3 << PXBIR_TYPE_OFFS)
+#define PXBIR_TYPE_32BIT_ADDR	(0x0 << PXBIR_TYPE_OFFS)
+#define PXBIR_TYPE_64BIT_ADDR	(0x2 << PXBIR_TYPE_OFFS)
+
+#define PXBIR_PREFETCH_EN		BIT3 	/* Prefetch Enable */
+
+#define PXBIR_BASE_OFFS		20		/* Base address. Address bits [31:20] */
+#define PXBIR_BASE_MASK		(0xfff << PXBIR_BASE_OFFS)
+#define PXBIR_BASE_ALIGNMET	(1 << PXBIR_BASE_OFFS)
+
+
+/* PCI Express BAR0 Internal (High) Register*/
+/*PEX BAR0_INTER_REG_HIGH (PXBIRH)*/      
+
+#define PXBIRH_BASE_OFFS			0		/* Base address. Bits [63:32] */
+#define PXBIRH_BASE_MASK			(0xffffffff << PBBHR_BASE_OFFS)
+
+
+#define PEX_BAR_DEFAULT_ATTRIB		0xc /* Memory - Prefetch - 64 bit address */
+#define PEX_BAR0_DEFAULT_ATTRIB	    PEX_BAR_DEFAULT_ATTRIB  
+#define PEX_BAR1_DEFAULT_ATTRIB		PEX_BAR_DEFAULT_ATTRIB
+#define PEX_BAR2_DEFAULT_ATTRIB		PEX_BAR_DEFAULT_ATTRIB
+
+
+/* PCI Express BAR1 Register */
+/*  PCI Express BAR2 Register*/
+/*PEX BAR1_REG (PXBR)*/
+/*PEX BAR2_REG (PXBR)*/
+
+#define PXBR_IOSPACE			BIT0	/* Memory Space Indicator */
+
+#define PXBR_TYPE_OFFS			1	   /* BAR Type/Init Val. */ 
+#define PXBR_TYPE_MASK			(0x3 << PXBR_TYPE_OFFS)
+#define PXBR_TYPE_32BIT_ADDR	(0x0 << PXBR_TYPE_OFFS)
+#define PXBR_TYPE_64BIT_ADDR	(0x2 << PXBR_TYPE_OFFS)
+
+#define PXBR_PREFETCH_EN		BIT3 	/* Prefetch Enable */
+
+#define PXBR_BASE_OFFS		16		/* Base address. Address bits [31:16] */
+#define PXBR_BASE_MASK		(0xffff << PXBR_BASE_OFFS)
+#define PXBR_BASE_ALIGNMET	(1 << PXBR_BASE_OFFS)
+
+
+/* PCI Express BAR1 (High) Register*/
+/* PCI Express BAR2 (High) Register*/
+/*PEX BAR1_REG_HIGH (PXBRH)*/
+/*PEX BAR2_REG_HIGH (PXBRH)*/
+
+#define PXBRH_BASE_OFFS			0		/* Base address. Address bits [63:32] */
+#define PXBRH_BASE_MASK			(0xffffffff << PXBRH_BASE_OFFS)
+
+/* PCI Express Expansion ROM BAR Register*/
+/*PEX_EXPANSION_ROM_BASE_ADDR_REG (PXERBAR)*/
+
+#define PXERBAR_EXPROMEN		BIT0	/* Expansion ROM Enable */
+
+#define PXERBAR_BASE_512K_OFFS		19		/* Expansion ROM Base Address */
+#define PXERBAR_BASE_512K_MASK		(0x1fff << PXERBAR_BASE_512K_OFFS) 	
+
+#define PXERBAR_BASE_1MB_OFFS		20		/* Expansion ROM Base Address */
+#define PXERBAR_BASE_1MB_MASK		(0xfff << PXERBAR_BASE_1MB_OFFS) 	
+
+#define PXERBAR_BASE_2MB_OFFS		21		/* Expansion ROM Base Address */
+#define PXERBAR_BASE_2MB_MASK		(0x7ff << PXERBAR_BASE_2MB_OFFS) 	
+
+#define PXERBAR_BASE_4MB_OFFS		22		/* Expansion ROM Base Address */
+#define PXERBAR_BASE_4MB_MASK		(0x3ff << PXERBAR_BASE_4MB_OFFS) 	
+
+/* PEX Bar attributes */
+typedef struct _mvPexBar
+{
+	MV_ADDR_WIN   addrWin;    /* An address window*/
+	MV_BOOL       enable;     /* Address decode window is enabled/disabled    */
+
+}MV_PEX_BAR;
+
+/* PEX Remap Window attributes */
+typedef struct _mvPexRemapWin
+{
+	MV_ADDR_WIN   addrWin;    /* An address window*/
+	MV_BOOL       enable;     /* Address decode window is enabled/disabled    */
+
+}MV_PEX_REMAP_WIN;
+
+/* PEX Remap Window attributes */
+typedef struct _mvPexDecWin
+{
+	MV_TARGET	  target;
+	MV_ADDR_WIN   addrWin;    /* An address window*/
+	MV_U32		  targetBar;
+	MV_U8			attrib;			/* chip select attributes */
+	MV_TARGET_ID 	targetId; 		/* Target Id of this MV_TARGET */
+	MV_BOOL       enable;     /* Address decode window is enabled/disabled    */
+
+}MV_PEX_DEC_WIN;
+
+/* Global Functions prototypes */
+/* mvPexHalInit - Initialize PEX interfaces*/
+MV_STATUS mvPexInit(MV_U32 pexIf, MV_PEX_TYPE pexType);
+
+
+/* mvPexTargetWinSet - Set PEX to peripheral target address window BAR*/
+MV_STATUS mvPexTargetWinSet(MV_U32 pexIf, MV_U32 winNum, 
+                            MV_PEX_DEC_WIN *pAddrDecWin);
+
+/* mvPexTargetWinGet - Get PEX to peripheral target address window*/
+MV_STATUS mvPexTargetWinGet(MV_U32 pexIf, MV_U32 winNum, 
+                            MV_PEX_DEC_WIN *pAddrDecWin);
+
+/* mvPexTargetWinEnable - Enable/disable a PEX BAR window*/
+MV_STATUS mvPexTargetWinEnable(MV_U32 pexIf,MV_U32 winNum, MV_BOOL enable);
+
+/* mvPexTargetWinRemap - Set PEX to target address window remap.*/
+MV_STATUS mvPexTargetWinRemap(MV_U32 pexIf, MV_U32 winNum, 
+                           MV_PEX_REMAP_WIN *pAddrWin);
+
+/* mvPexTargetWinRemapEnable -enable\disable a PEX Window remap.*/
+MV_STATUS mvPexTargetWinRemapEnable(MV_U32 pexIf, MV_U32 winNum, 
+                           MV_BOOL enable);
+
+/* mvPexBarSet - Set PEX bar address and size */
+MV_STATUS mvPexBarSet(MV_U32 pexIf, MV_U32 barNum, MV_PEX_BAR *addrWin);
+
+/* mvPexBarGet - Get PEX bar address and size */
+MV_STATUS mvPexBarGet(MV_U32 pexIf, MV_U32 barNum, MV_PEX_BAR *addrWin);
+
+/* mvPexBarEnable - enable\disable a PEX bar*/
+MV_STATUS mvPexBarEnable(MV_U32 pexIf, MV_U32 barNum, MV_BOOL enable);
+
+/* mvPexAddrDecShow - Display address decode windows attributes */
+MV_VOID mvPexAddrDecShow(MV_VOID);
+
+#endif
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysSata.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysSata.c
new file mode 100644
index 0000000000..f100a12d10
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysSata.c
@@ -0,0 +1,430 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#include "mvTypes.h"
+#include "mvCommon.h"
+#include "mvOs.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "cpu/mvCpu.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+#include "sata/CoreDriver/mvRegs.h"
+#include "ctrlEnv/sys/mvSysSata.h"
+
+MV_TARGET sataAddrDecPrioTab[] =
+{
+#if defined(MV_INCLUDE_SDRAM_CS0)
+    SDRAM_CS0,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS1)
+    SDRAM_CS1,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS2)
+    SDRAM_CS2,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS3)
+    SDRAM_CS3,
+#endif
+#if defined(MV_INCLUDE_PEX)
+	PEX0_MEM,
+#endif
+	TBL_TERM
+};
+
+
+/*******************************************************************************
+* sataWinOverlapDetect - Detect SATA address windows overlapping
+*
+* DESCRIPTION:
+*       An unpredicted behaviur is expected in case SATA address decode 
+*       windows overlapps.
+*       This function detects SATA address decode windows overlapping of a 
+*       specified window. The function does not check the window itself for 
+*       overlapping. The function also skipps disabled address decode windows.
+*
+* INPUT:
+*       winNum      - address decode window number.
+*       pAddrDecWin - An address decode window struct.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_TRUE if the given address window overlap current address
+*       decode map, MV_FALSE otherwise, MV_ERROR if reading invalid data 
+*       from registers.
+*
+*******************************************************************************/
+static MV_STATUS sataWinOverlapDetect(int dev, MV_U32 winNum, 
+				      MV_ADDR_WIN *pAddrWin)
+{
+    MV_U32          winNumIndex;
+    MV_SATA_DEC_WIN  addrDecWin;
+
+    for(winNumIndex=0; winNumIndex<MV_SATA_MAX_ADDR_DECODE_WIN; winNumIndex++)
+    {
+        /* Do not check window itself       */
+        if (winNumIndex == winNum)
+        {
+            continue;
+        }
+
+        /* Get window parameters    */
+        if (MV_OK != mvSataWinGet(dev, winNumIndex, &addrDecWin))
+        {
+            mvOsPrintf("%s: ERR. TargetWinGet failed\n", __FUNCTION__);
+            return MV_ERROR;
+        }
+
+        /* Do not check disabled windows    */
+        if(addrDecWin.enable == MV_FALSE)
+        {
+            continue;
+        }
+
+        if (MV_TRUE == ctrlWinOverlapTest(pAddrWin, &(addrDecWin.addrWin)))
+        {
+            return MV_TRUE;
+        }        
+    }
+    return MV_FALSE;
+}
+
+
+/*******************************************************************************
+* mvSataWinSet - Set SATA target address window
+*
+* DESCRIPTION:
+*       This function sets a peripheral target (e.g. SDRAM bank0, PCI_MEM0) 
+*       address window, also known as address decode window. 
+*       After setting this target window, the SATA will be able to access the 
+*       target within the address window. 
+*
+* INPUT:
+*       winNum      - SATA target address decode window number.
+*       pAddrDecWin - SATA target window data structure.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_ERROR if address window overlapps with other address decode windows.
+*       MV_BAD_PARAM if base address is invalid parameter or target is 
+*       unknown.
+*
+*******************************************************************************/
+MV_STATUS mvSataWinSet(int dev, MV_U32 winNum, MV_SATA_DEC_WIN *pAddrDecWin)
+{
+    MV_TARGET_ATTRIB    targetAttribs;
+    MV_DEC_REGS         decRegs;
+
+    /* Parameter checking   */
+    if (winNum >= MV_SATA_MAX_ADDR_DECODE_WIN)
+    {
+        mvOsPrintf("%s: ERR. Invalid win num %d\n",__FUNCTION__, winNum);
+        return MV_BAD_PARAM;
+    }
+    
+    /* Check if the requested window overlapps with current windows         */
+    if (MV_TRUE == sataWinOverlapDetect(dev, winNum, &pAddrDecWin->addrWin))
+    {
+        mvOsPrintf("%s: ERR. Window %d overlap\n", __FUNCTION__, winNum);
+        return MV_ERROR;
+    }
+
+    /* check if address is aligned to the size */
+    if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size))
+    {
+	mvOsPrintf("mvSataWinSet:Error setting SATA window %d to "\
+		   "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n",
+		   winNum,
+		   mvCtrlTargetNameGet(pAddrDecWin->target), 
+		   pAddrDecWin->addrWin.baseLow,
+		   pAddrDecWin->addrWin.size);
+	return MV_ERROR;
+    }
+
+    decRegs.baseReg = 0;
+    decRegs.sizeReg = 0;
+
+    if (MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs))
+    {
+        mvOsPrintf("%s: mvCtrlAddrDecToReg Failed\n", __FUNCTION__);
+        return MV_ERROR;
+    }
+
+    mvCtrlAttribGet(pAddrDecWin->target, &targetAttribs);
+                                                                                                                         
+    /* set attributes */
+    decRegs.sizeReg &= ~MV_SATA_WIN_ATTR_MASK;
+    decRegs.sizeReg |= (targetAttribs.attrib << MV_SATA_WIN_ATTR_OFFSET);
+
+    /* set target ID */
+    decRegs.sizeReg &= ~MV_SATA_WIN_TARGET_MASK;
+    decRegs.sizeReg |= (targetAttribs.targetId << MV_SATA_WIN_TARGET_OFFSET);
+
+    if (pAddrDecWin->enable == MV_TRUE)
+    {
+        decRegs.sizeReg |= MV_SATA_WIN_ENABLE_MASK;
+    }
+    else
+    {
+        decRegs.sizeReg &= ~MV_SATA_WIN_ENABLE_MASK;
+    }
+
+    MV_REG_WRITE( MV_SATA_WIN_CTRL_REG(dev, winNum), decRegs.sizeReg);
+    MV_REG_WRITE( MV_SATA_WIN_BASE_REG(dev, winNum), decRegs.baseReg);
+    
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvSataWinGet - Get SATA peripheral target address window.
+*
+* DESCRIPTION:
+*       Get SATA peripheral target address window.
+*
+* INPUT:
+*       winNum - SATA target address decode window number.
+*
+* OUTPUT:
+*       pAddrDecWin - SATA target window data structure.
+*
+* RETURN:
+*       MV_ERROR if register parameters are invalid.
+*
+*******************************************************************************/
+MV_STATUS mvSataWinGet(int dev, MV_U32 winNum, MV_SATA_DEC_WIN *pAddrDecWin)
+{
+    MV_DEC_REGS         decRegs;
+    MV_TARGET_ATTRIB    targetAttrib;
+                                                                                                                         
+    /* Parameter checking   */
+    if (winNum >= MV_SATA_MAX_ADDR_DECODE_WIN)
+    {
+        mvOsPrintf("%s (dev=%d): ERR. Invalid winNum %d\n", 
+                    __FUNCTION__, dev, winNum);
+        return MV_NOT_SUPPORTED;
+    }
+
+    decRegs.baseReg = MV_REG_READ( MV_SATA_WIN_BASE_REG(dev, winNum) );
+    decRegs.sizeReg = MV_REG_READ( MV_SATA_WIN_CTRL_REG(dev, winNum) );
+ 
+    if (MV_OK != mvCtrlRegToAddrDec(&decRegs, &pAddrDecWin->addrWin) )
+    {
+        mvOsPrintf("%s: mvCtrlRegToAddrDec Failed\n", __FUNCTION__);
+        return MV_ERROR; 
+    }
+       
+    /* attrib and targetId */
+    targetAttrib.attrib = (decRegs.sizeReg & MV_SATA_WIN_ATTR_MASK) >> 
+		MV_SATA_WIN_ATTR_OFFSET;
+    targetAttrib.targetId = (decRegs.sizeReg & MV_SATA_WIN_TARGET_MASK) >> 
+		MV_SATA_WIN_TARGET_OFFSET;
+ 
+    pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib);
+
+    /* Check if window is enabled   */
+    if(decRegs.sizeReg & MV_SATA_WIN_ENABLE_MASK) 
+    {
+        pAddrDecWin->enable = MV_TRUE;
+    }
+    else
+    {
+        pAddrDecWin->enable = MV_FALSE;
+    }
+    return MV_OK;
+}
+/*******************************************************************************
+* mvSataAddrDecShow - Print the SATA address decode map.
+*
+* DESCRIPTION:
+*		This function print the SATA address decode map.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+MV_VOID mvSataAddrDecShow(MV_VOID)
+{
+
+	MV_SATA_DEC_WIN win;
+	int i,j;
+
+
+
+    for( j = 0; j < MV_SATA_MAX_CHAN; j++ )
+    {
+	if (MV_FALSE == mvCtrlPwrClckGet(SATA_UNIT_ID, j)) 
+		return;
+
+	mvOsOutput( "\n" );
+	mvOsOutput( "SATA %d:\n", j );
+	mvOsOutput( "----\n" );
+
+	for( i = 0; i < MV_SATA_MAX_ADDR_DECODE_WIN; i++ )
+	{
+            memset( &win, 0, sizeof(MV_SATA_DEC_WIN) );
+
+	    mvOsOutput( "win%d - ", i );
+
+	    if( mvSataWinGet(j, i, &win ) == MV_OK )
+	    {
+	        if( win.enable )
+	        {
+                    mvOsOutput( "%s base %08x, ",
+                    mvCtrlTargetNameGet(win.target), win.addrWin.baseLow );
+                    mvOsOutput( "...." );
+
+                    mvSizePrint( win.addrWin.size );
+    
+		    mvOsOutput( "\n" );
+                }
+		else
+		mvOsOutput( "disable\n" );
+	    }
+	}
+    }
+}
+
+
+/*******************************************************************************
+* mvSataWinInit - Initialize the integrated SATA target address window.
+*
+* DESCRIPTION:
+*       Initialize the SATA peripheral target address window.
+*
+* INPUT:
+*
+*
+* OUTPUT:
+*     
+*
+* RETURN:
+*       MV_ERROR if register parameters are invalid.
+*
+*******************************************************************************/
+MV_STATUS mvSataWinInit(MV_VOID)
+{
+    int             winNum;
+    MV_SATA_DEC_WIN  sataWin;
+    MV_CPU_DEC_WIN  cpuAddrDecWin;
+    MV_U32          status, winPrioIndex = 0;
+
+    /* Initiate Sata address decode */
+
+    /* First disable all address decode windows */
+    for(winNum = 0; winNum < MV_SATA_MAX_ADDR_DECODE_WIN; winNum++)
+    {
+        MV_U32  regVal = MV_REG_READ(MV_SATA_WIN_CTRL_REG(0, winNum));
+        regVal &= ~MV_SATA_WIN_ENABLE_MASK;
+        MV_REG_WRITE(MV_SATA_WIN_CTRL_REG(0, winNum), regVal);
+    }
+    
+    winNum = 0;
+    while( (sataAddrDecPrioTab[winPrioIndex] != TBL_TERM) &&
+           (winNum < MV_SATA_MAX_ADDR_DECODE_WIN) )
+    {
+        /* first get attributes from CPU If */
+        status = mvCpuIfTargetWinGet(sataAddrDecPrioTab[winPrioIndex],
+                                     &cpuAddrDecWin);
+
+        if(MV_NO_SUCH == status)
+        {
+            winPrioIndex++;
+            continue;
+        }
+	if (MV_OK != status)
+	{
+            mvOsPrintf("%s: ERR. mvCpuIfTargetWinGet failed\n", __FUNCTION__);
+	    return MV_ERROR;
+	}
+
+        if (cpuAddrDecWin.enable == MV_TRUE)
+        {
+            sataWin.addrWin.baseHigh = cpuAddrDecWin.addrWin.baseHigh;
+            sataWin.addrWin.baseLow  = cpuAddrDecWin.addrWin.baseLow;
+            sataWin.addrWin.size     = cpuAddrDecWin.addrWin.size;
+            sataWin.enable           = MV_TRUE;
+            sataWin.target           = sataAddrDecPrioTab[winPrioIndex];
+            
+            if(MV_OK != mvSataWinSet(0/*dev*/, winNum, &sataWin))
+            {
+                return MV_ERROR;
+            }
+            winNum++;
+        }
+        winPrioIndex++;
+    }
+    return MV_OK;
+}
+
+
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysSata.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysSata.h
new file mode 100644
index 0000000000..611f5776b7
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysSata.h
@@ -0,0 +1,128 @@
+
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+#ifndef __INCMVSysSataAddrDech
+#define __INCMVSysSataAddrDech
+
+#include "mvCommon.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct _mvSataDecWin
+{
+    MV_TARGET     target;
+    MV_ADDR_WIN   addrWin;    /* An address window*/
+    MV_BOOL       enable;     /* Address decode window is enabled/disabled    */
+ 
+} MV_SATA_DEC_WIN;
+
+
+#define MV_SATA_MAX_ADDR_DECODE_WIN 4
+
+#define MV_SATA_WIN_CTRL_REG(dev, win)        (SATA_REG_BASE + 0x30 + ((win)<<4))
+#define MV_SATA_WIN_BASE_REG(dev, win)        (SATA_REG_BASE + 0x34 + ((win)<<4))
+
+/* BITs in Bridge Interrupt Cause and Mask registers */
+#define MV_SATA_ADDR_DECODE_ERROR_BIT        0
+#define MV_SATA_ADDR_DECODE_ERROR_MASK       (1<<MV_SATA_ADDR_DECODE_ERROR_BIT)
+
+/* BITs in Windows 0-3 Control and Base Registers */
+#define MV_SATA_WIN_ENABLE_BIT               0
+#define MV_SATA_WIN_ENABLE_MASK              (1<<MV_SATA_WIN_ENABLE_BIT)
+
+#define MV_SATA_WIN_TARGET_OFFSET            4
+#define MV_SATA_WIN_TARGET_MASK              (0xF<<MV_SATA_WIN_TARGET_OFFSET)
+
+#define MV_SATA_WIN_ATTR_OFFSET              8
+#define MV_SATA_WIN_ATTR_MASK                (0xFF<<MV_SATA_WIN_ATTR_OFFSET)
+
+#define MV_SATA_WIN_SIZE_OFFSET              16
+#define MV_SATA_WIN_SIZE_MASK                (0xFFFF<<MV_SATA_WIN_SIZE_OFFSET)
+
+#define MV_SATA_WIN_BASE_OFFSET              16
+#define MV_SATA_WIN_BASE_MASK                (0xFFFF<<MV_SATA_WIN_BASE_OFFSET)
+
+MV_STATUS mvSataWinGet(int dev, MV_U32 winNum, MV_SATA_DEC_WIN *pAddrDecWin);
+MV_STATUS mvSataWinSet(int dev, MV_U32 winNum, MV_SATA_DEC_WIN *pAddrDecWin);
+MV_STATUS mvSataWinByTargetGet(MV_TARGET target, MV_SATA_DEC_WIN *pAddrDecWin);
+MV_STATUS mvSataWinInit(MV_VOID);
+MV_VOID   mvSataAddrDecShow(MV_VOID);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif
+
+
+
+
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysSdmmc.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysSdmmc.c
new file mode 100644
index 0000000000..6d2a919242
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysSdmmc.c
@@ -0,0 +1,427 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#include "mvTypes.h"
+#include "mvCommon.h"
+#include "mvOs.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "cpu/mvCpu.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+#include "mvRegs.h"
+#include "ctrlEnv/sys/mvSysSdmmc.h"
+
+MV_TARGET sdmmcAddrDecPrioTab[] =
+{
+#if defined(MV_INCLUDE_SDRAM_CS0)
+    SDRAM_CS0,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS1)
+    SDRAM_CS1,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS2)
+    SDRAM_CS2,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS3)
+    SDRAM_CS3,
+#endif
+#if defined(MV_INCLUDE_PEX)
+	PEX0_MEM,
+#endif
+	TBL_TERM
+};
+
+
+/*******************************************************************************
+* sdmmcWinOverlapDetect - Detect SDMMC address windows overlapping
+*
+* DESCRIPTION:
+*       An unpredicted behaviur is expected in case SDMMC address decode 
+*       windows overlapps.
+*       This function detects SDMMC address decode windows overlapping of a 
+*       specified window. The function does not check the window itself for 
+*       overlapping. The function also skipps disabled address decode windows.
+*
+* INPUT:
+*       winNum      - address decode window number.
+*       pAddrDecWin - An address decode window struct.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_TRUE if the given address window overlap current address
+*       decode map, MV_FALSE otherwise, MV_ERROR if reading invalid data 
+*       from registers.
+*
+*******************************************************************************/
+static MV_STATUS sdmmcWinOverlapDetect(int dev, MV_U32 winNum, 
+				      MV_ADDR_WIN *pAddrWin)
+{
+    MV_U32          winNumIndex;
+    MV_SDMMC_DEC_WIN  addrDecWin;
+
+    for(winNumIndex=0; winNumIndex<MV_SDMMC_MAX_ADDR_DECODE_WIN; winNumIndex++)
+    {
+        /* Do not check window itself       */
+        if (winNumIndex == winNum)
+        {
+            continue;
+        }
+
+        /* Get window parameters    */
+        if (MV_OK != mvSdmmcWinGet(dev, winNumIndex, &addrDecWin))
+        {
+            mvOsPrintf("%s: ERR. TargetWinGet failed\n", __FUNCTION__);
+            return MV_ERROR;
+        }
+
+        /* Do not check disabled windows    */
+        if(addrDecWin.enable == MV_FALSE)
+        {
+            continue;
+        }
+
+        if (MV_TRUE == ctrlWinOverlapTest(pAddrWin, &(addrDecWin.addrWin)))
+        {
+            return MV_TRUE;
+        }        
+    }
+    return MV_FALSE;
+}
+
+
+/*******************************************************************************
+* mvSdmmcWinSet - Set SDMMC target address window
+*
+* DESCRIPTION:
+*       This function sets a peripheral target (e.g. SDRAM bank0, PCI_MEM0) 
+*       address window, also known as address decode window. 
+*       After setting this target window, the SDMMC will be able to access the 
+*       target within the address window. 
+*
+* INPUT:
+*       winNum      - SDMMC target address decode window number.
+*       pAddrDecWin - SDMMC target window data structure.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_ERROR if address window overlapps with other address decode windows.
+*       MV_BAD_PARAM if base address is invalid parameter or target is 
+*       unknown.
+*
+*******************************************************************************/
+MV_STATUS mvSdmmcWinSet(int dev, MV_U32 winNum, MV_SDMMC_DEC_WIN *pAddrDecWin)
+{
+    MV_TARGET_ATTRIB    targetAttribs;
+    MV_DEC_REGS         decRegs;
+
+    /* Parameter checking   */
+    if (winNum >= MV_SDMMC_MAX_ADDR_DECODE_WIN)
+    {
+        mvOsPrintf("%s: ERR. Invalid win num %d\n",__FUNCTION__, winNum);
+        return MV_BAD_PARAM;
+    }
+    
+    /* Check if the requested window overlapps with current windows         */
+    if (MV_TRUE == sdmmcWinOverlapDetect(dev, winNum, &pAddrDecWin->addrWin))
+    {
+        mvOsPrintf("%s: ERR. Window %d overlap\n", __FUNCTION__, winNum);
+        return MV_ERROR;
+    }
+
+    /* check if address is aligned to the size */
+    if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size))
+    {
+	mvOsPrintf("mvSdmmcWinSet:Error setting SDMMC window %d to "\
+		   "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n",
+		   winNum,
+		   mvCtrlTargetNameGet(pAddrDecWin->target), 
+		   pAddrDecWin->addrWin.baseLow,
+		   pAddrDecWin->addrWin.size);
+	return MV_ERROR;
+    }
+
+    decRegs.baseReg = 0;
+    decRegs.sizeReg = 0;
+
+    if (MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs))
+    {
+        mvOsPrintf("%s: mvCtrlAddrDecToReg Failed\n", __FUNCTION__);
+        return MV_ERROR;
+    }
+
+    mvCtrlAttribGet(pAddrDecWin->target, &targetAttribs);
+                                                                                                                         
+    /* set attributes */
+    decRegs.sizeReg &= ~MV_SDMMC_WIN_ATTR_MASK;
+    decRegs.sizeReg |= (targetAttribs.attrib << MV_SDMMC_WIN_ATTR_OFFSET);
+
+    /* set target ID */
+    decRegs.sizeReg &= ~MV_SDMMC_WIN_TARGET_MASK;
+    decRegs.sizeReg |= (targetAttribs.targetId << MV_SDMMC_WIN_TARGET_OFFSET);
+
+    if (pAddrDecWin->enable == MV_TRUE)
+    {
+        decRegs.sizeReg |= MV_SDMMC_WIN_ENABLE_MASK;
+    }
+    else
+    {
+        decRegs.sizeReg &= ~MV_SDMMC_WIN_ENABLE_MASK;
+    }
+
+    MV_REG_WRITE( MV_SDMMC_WIN_CTRL_REG(dev, winNum), decRegs.sizeReg);
+    MV_REG_WRITE( MV_SDMMC_WIN_BASE_REG(dev, winNum), decRegs.baseReg);
+    
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvSdmmcWinGet - Get SDMMC peripheral target address window.
+*
+* DESCRIPTION:
+*       Get SDMMC peripheral target address window.
+*
+* INPUT:
+*       winNum - SDMMC target address decode window number.
+*d
+* OUTPUT:
+*       pAddrDecWin - SDMMC target window data structure.
+*
+* RETURN:
+*       MV_ERROR if register parameters are invalid.
+*
+*******************************************************************************/
+MV_STATUS mvSdmmcWinGet(int dev, MV_U32 winNum, MV_SDMMC_DEC_WIN *pAddrDecWin)
+{
+    MV_DEC_REGS         decRegs;
+    MV_TARGET_ATTRIB    targetAttrib;
+                                                                                                                         
+    /* Parameter checking   */
+    if (winNum >= MV_SDMMC_MAX_ADDR_DECODE_WIN)
+    {
+        mvOsPrintf("%s (dev=%d): ERR. Invalid winNum %d\n", 
+                    __FUNCTION__, dev, winNum);
+        return MV_NOT_SUPPORTED;
+    }
+
+    decRegs.baseReg = MV_REG_READ( MV_SDMMC_WIN_BASE_REG(dev, winNum) );
+    decRegs.sizeReg = MV_REG_READ( MV_SDMMC_WIN_CTRL_REG(dev, winNum) );
+ 
+    if (MV_OK != mvCtrlRegToAddrDec(&decRegs, &pAddrDecWin->addrWin) )
+    {
+        mvOsPrintf("%s: mvCtrlRegToAddrDec Failed\n", __FUNCTION__);
+        return MV_ERROR; 
+    }
+       
+    /* attrib and targetId */
+    targetAttrib.attrib = (decRegs.sizeReg & MV_SDMMC_WIN_ATTR_MASK) >> 
+		MV_SDMMC_WIN_ATTR_OFFSET;
+    targetAttrib.targetId = (decRegs.sizeReg & MV_SDMMC_WIN_TARGET_MASK) >> 
+		MV_SDMMC_WIN_TARGET_OFFSET;
+ 
+    pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib);
+
+    /* Check if window is enabled   */
+    if(decRegs.sizeReg & MV_SDMMC_WIN_ENABLE_MASK) 
+    {
+        pAddrDecWin->enable = MV_TRUE;
+    }
+    else
+    {
+        pAddrDecWin->enable = MV_FALSE;
+    }
+    return MV_OK;
+}
+/*******************************************************************************
+* mvSdmmcAddrDecShow - Print the SDMMC address decode map.
+*
+* DESCRIPTION:
+*		This function print the SDMMC address decode map.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+MV_VOID mvSdmmcAddrDecShow(MV_VOID)
+{
+
+	MV_SDMMC_DEC_WIN win;
+	int i,j=0;
+
+
+
+	if (MV_FALSE == mvCtrlPwrClckGet(SDIO_UNIT_ID, 0)) 
+		return;
+
+	mvOsOutput( "\n" );
+	mvOsOutput( "SDMMC %d:\n", j );
+	mvOsOutput( "----\n" );
+
+	for( i = 0; i < MV_SDMMC_MAX_ADDR_DECODE_WIN; i++ )
+	{
+            memset( &win, 0, sizeof(MV_SDMMC_DEC_WIN) );
+
+	    mvOsOutput( "win%d - ", i );
+
+	    if( mvSdmmcWinGet(j, i, &win ) == MV_OK )
+	    {
+	        if( win.enable )
+	        {
+                    mvOsOutput( "%s base %08x, ",
+                    mvCtrlTargetNameGet(win.target), win.addrWin.baseLow );
+                    mvOsOutput( "...." );
+
+                    mvSizePrint( win.addrWin.size );
+    
+		    mvOsOutput( "\n" );
+                }
+		else
+		mvOsOutput( "disable\n" );
+	    }
+	}
+}
+
+
+/*******************************************************************************
+* mvSdmmcWinInit - Initialize the integrated SDMMC target address window.
+*
+* DESCRIPTION:
+*       Initialize the SDMMC peripheral target address window.
+*
+* INPUT:
+*
+*
+* OUTPUT:
+*     
+*
+* RETURN:
+*       MV_ERROR if register parameters are invalid.
+*
+*******************************************************************************/
+MV_STATUS mvSdmmcWinInit(MV_VOID)
+{
+    int             winNum;
+    MV_SDMMC_DEC_WIN  sdmmcWin;
+    MV_CPU_DEC_WIN  cpuAddrDecWin;
+    MV_U32          status, winPrioIndex = 0;
+
+    /* Initiate Sdmmc address decode */
+
+    /* First disable all address decode windows */
+    for(winNum = 0; winNum < MV_SDMMC_MAX_ADDR_DECODE_WIN; winNum++)
+    {
+        MV_U32  regVal = MV_REG_READ(MV_SDMMC_WIN_CTRL_REG(0, winNum));
+        regVal &= ~MV_SDMMC_WIN_ENABLE_MASK;
+        MV_REG_WRITE(MV_SDMMC_WIN_CTRL_REG(0, winNum), regVal);
+    }
+    
+    winNum = 0;
+    while( (sdmmcAddrDecPrioTab[winPrioIndex] != TBL_TERM) &&
+           (winNum < MV_SDMMC_MAX_ADDR_DECODE_WIN) )
+    {
+        /* first get attributes from CPU If */
+        status = mvCpuIfTargetWinGet(sdmmcAddrDecPrioTab[winPrioIndex],
+                                     &cpuAddrDecWin);
+
+        if(MV_NO_SUCH == status)
+        {
+            winPrioIndex++;
+            continue;
+        }
+	if (MV_OK != status)
+	{
+            mvOsPrintf("%s: ERR. mvCpuIfTargetWinGet failed\n", __FUNCTION__);
+	    return MV_ERROR;
+	}
+
+        if (cpuAddrDecWin.enable == MV_TRUE)
+        {
+            sdmmcWin.addrWin.baseHigh = cpuAddrDecWin.addrWin.baseHigh;
+            sdmmcWin.addrWin.baseLow  = cpuAddrDecWin.addrWin.baseLow;
+            sdmmcWin.addrWin.size     = cpuAddrDecWin.addrWin.size;
+            sdmmcWin.enable           = MV_TRUE;
+            sdmmcWin.target           = sdmmcAddrDecPrioTab[winPrioIndex];
+            
+            if(MV_OK != mvSdmmcWinSet(0/*dev*/, winNum, &sdmmcWin))
+            {
+                return MV_ERROR;
+            }
+            winNum++;
+        }
+        winPrioIndex++;
+    }
+    return MV_OK;
+}
+
+
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysSdmmc.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysSdmmc.h
new file mode 100644
index 0000000000..c2f9f79446
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysSdmmc.h
@@ -0,0 +1,125 @@
+
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+#ifndef __INCMVSysSdmmcAddrDech
+#define __INCMVSysSdmmcAddrDech
+
+#include "mvCommon.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct _mvSdmmcDecWin
+{
+    MV_TARGET     target;
+    MV_ADDR_WIN   addrWin;    /* An address window*/
+    MV_BOOL       enable;     /* Address decode window is enabled/disabled    */
+ 
+} MV_SDMMC_DEC_WIN;
+
+
+#define MV_SDMMC_MAX_ADDR_DECODE_WIN 4
+
+#define MV_SDMMC_WIN_CTRL_REG(dev, win)        (MV_SDIO_REG_BASE + 0x108 + ((win)<<3))
+#define MV_SDMMC_WIN_BASE_REG(dev, win)        (MV_SDIO_REG_BASE + 0x10c + ((win)<<3))
+
+
+/* BITs in Windows 0-3 Control and Base Registers */
+#define MV_SDMMC_WIN_ENABLE_BIT               0
+#define MV_SDMMC_WIN_ENABLE_MASK              (1<<MV_SDMMC_WIN_ENABLE_BIT)
+
+#define MV_SDMMC_WIN_TARGET_OFFSET            4
+#define MV_SDMMC_WIN_TARGET_MASK              (0xF<<MV_SDMMC_WIN_TARGET_OFFSET)
+
+#define MV_SDMMC_WIN_ATTR_OFFSET              8
+#define MV_SDMMC_WIN_ATTR_MASK                (0xFF<<MV_SDMMC_WIN_ATTR_OFFSET)
+
+#define MV_SDMMC_WIN_SIZE_OFFSET              16
+#define MV_SDMMC_WIN_SIZE_MASK                (0xFFFF<<MV_SDMMC_WIN_SIZE_OFFSET)
+
+#define MV_SDMMC_WIN_BASE_OFFSET              16
+#define MV_SDMMC_WIN_BASE_MASK                (0xFFFF<<MV_SDMMC_WIN_BASE_OFFSET)
+
+MV_STATUS mvSdmmcWinGet(int dev, MV_U32 winNum, MV_SDMMC_DEC_WIN *pAddrDecWin);
+MV_STATUS mvSdmmcWinSet(int dev, MV_U32 winNum, MV_SDMMC_DEC_WIN *pAddrDecWin);
+MV_STATUS mvSdmmcWinByTargetGet(MV_TARGET target, MV_SDMMC_DEC_WIN *pAddrDecWin);
+MV_STATUS mvSdmmcWinInit(MV_VOID);
+MV_VOID   mvSdmmcAddrDecShow(MV_VOID);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif
+
+
+
+
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTdm.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTdm.c
new file mode 100644
index 0000000000..6ac7f12bfc
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTdm.c
@@ -0,0 +1,462 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "mvSysTdm.h"
+
+
+/* defines  */
+#ifdef MV_DEBUG
+	#define DB(x)	x
+#else
+	#define DB(x)
+#endif	
+
+static MV_TARGET tdmAddrDecPrioTap[] =
+{
+        PEX0_MEM,
+        SDRAM_CS0,
+        SDRAM_CS1,
+        SDRAM_CS2,
+        SDRAM_CS3,
+        DEVICE_CS0,
+        DEVICE_CS1,
+        DEVICE_CS2,
+        DEV_BOOCS,
+        PEX0_IO,
+        TBL_TERM
+};

+
+static MV_STATUS tdmWinOverlapDetect(MV_U32 winNum, MV_ADDR_WIN *pAddrWin);
+
+/*******************************************************************************
+* mvTdmWinInit - Initialize TDM address decode windows 
+*
+* DESCRIPTION:
+*               This function initialize TDM window decode unit. It set the 
+*               default address decode
+*               windows of the unit.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_ERROR if setting fail.
+*******************************************************************************/
+
+MV_STATUS mvTdmWinInit(void)
+{
+	MV_U32 		winNum;
+	MV_U32		winPrioIndex = 0;
+	MV_CPU_DEC_WIN cpuAddrDecWin;
+	MV_TDM_DEC_WIN tdmWin;
+	MV_STATUS status;
+
+	/*Disable all windows*/	
+	for (winNum = 0; winNum < TDM_MBUS_MAX_WIN; winNum++)
+	{
+		mvTdmWinEnable(winNum, MV_FALSE);
+	}
+
+	for (winNum = 0; ((tdmAddrDecPrioTap[winPrioIndex] != TBL_TERM) && 
+					  (winNum < TDM_MBUS_MAX_WIN)); )
+	{	
+		status = mvCpuIfTargetWinGet(tdmAddrDecPrioTap[winPrioIndex], 
+									 &cpuAddrDecWin);
+        if (MV_NO_SUCH == status)
+        {
+            winPrioIndex++;
+            continue;
+        }
+		if (MV_OK != status)
+		{
+			mvOsPrintf("mvTdmInit: ERR. mvCpuIfTargetWinGet failed\n");
+			return MV_ERROR;
+		}
+
+        if (cpuAddrDecWin.enable == MV_TRUE)
+		{
+			tdmWin.addrWin.baseHigh = cpuAddrDecWin.addrWin.baseHigh;
+			tdmWin.addrWin.baseLow = cpuAddrDecWin.addrWin.baseLow;
+			tdmWin.addrWin.size = cpuAddrDecWin.addrWin.size;
+			tdmWin.enable = MV_TRUE;
+		    tdmWin.target = tdmAddrDecPrioTap[winPrioIndex];
+		    if (MV_OK != mvTdmWinSet(winNum, &tdmWin))
+		    {
+			    return MV_ERROR;
+		    }
+		    winNum++;
+		}
+		winPrioIndex++;			
+    }
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvTdmWinSet - Set TDM target address window
+*
+* DESCRIPTION:
+*       This function sets a peripheral target (e.g. SDRAM bank0, PCI_MEM0)
+*       address window, also known as address decode window.
+*       After setting this target window, the TDM will be able to access the
+*       target within the address window.
+*
+* INPUT:
+*       winNum      - TDM to target address decode window number.
+*       pAddrDecWin - TDM target window data structure.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_ERROR if address window overlapps with other address decode windows.
+*       MV_BAD_PARAM if base address is invalid parameter or target is
+*       unknown.
+*
+*******************************************************************************/
+
+MV_STATUS mvTdmWinSet(MV_U32 winNum, MV_TDM_DEC_WIN *pAddrDecWin)
+{
+	MV_TARGET_ATTRIB targetAttribs;
+	MV_DEC_REGS decRegs;
+	MV_U32 ctrlReg = 0;
+
+    /* Parameter checking   */
+    if (winNum >= TDM_MBUS_MAX_WIN)
+    {
+		mvOsPrintf("mvTdmWinSet: ERR. Invalid win num %d\n",winNum);
+        return MV_BAD_PARAM;
+    }
+    
+    /* Check if the requested window overlapps with current windows         */
+    if (MV_TRUE == tdmWinOverlapDetect(winNum, &pAddrDecWin->addrWin))
+   	{
+       	mvOsPrintf("mvTdmWinSet: ERR. Window %d overlap\n", winNum);
+		return MV_ERROR;
+	}
+
+	/* check if address is aligned to the size */
+	if (MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size))
+	{
+		mvOsPrintf("mvTdmWinSet: Error setting TDM window %d to "\
+				   "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n",
+				   winNum,
+				   mvCtrlTargetNameGet(pAddrDecWin->target), 
+				   pAddrDecWin->addrWin.baseLow,
+				   pAddrDecWin->addrWin.size);
+		return MV_ERROR;
+	}
+
+	decRegs.baseReg = MV_REG_READ(TDM_WIN_BASE_REG(winNum));
+	decRegs.sizeReg = (MV_REG_READ(TDM_WIN_CTRL_REG(winNum)) & TDM_WIN_SIZE_MASK) >>  TDM_WIN_SIZE_OFFS;
+
+	if (MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs))
+	{
+			mvOsPrintf("mvTdmWinSet: mvCtrlAddrDecToReg Failed\n");
+			return MV_ERROR;
+	}
+	
+	mvCtrlAttribGet(pAddrDecWin->target, &targetAttribs);
+	
+	/* for the safe side we disable the window before writing the new
+	values */
+	mvTdmWinEnable(winNum, MV_FALSE);
+
+	ctrlReg |= (targetAttribs.attrib << TDM_WIN_ATTRIB_OFFS);
+	ctrlReg |= (targetAttribs.targetId << TDM_WIN_TARGET_OFFS);
+	ctrlReg |= (decRegs.sizeReg & TDM_WIN_SIZE_MASK);
+
+	/* Write to address base and control registers  */
+	MV_REG_WRITE(TDM_WIN_BASE_REG(winNum), decRegs.baseReg);
+	MV_REG_WRITE(TDM_WIN_CTRL_REG(winNum), ctrlReg);  
+	/* Enable address decode target window  */
+	if (pAddrDecWin->enable == MV_TRUE)
+	{
+		mvTdmWinEnable(winNum, MV_TRUE);
+	}    
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvTdmWinGet - Get peripheral target address window.
+*
+* DESCRIPTION:
+*               Get TDM peripheral target address window.
+*
+* INPUT:
+*       winNum - TDM to target address decode window number.
+*
+* OUTPUT:
+*       pAddrDecWin - TDM target window data structure.
+*
+* RETURN:
+*       MV_ERROR if register parameters are invalid.
+*
+*******************************************************************************/
+
+MV_STATUS mvTdmWinGet(MV_U32 winNum, MV_TDM_DEC_WIN *pAddrDecWin)
+{
+
+	MV_DEC_REGS decRegs;
+	MV_TARGET_ATTRIB targetAttrib;
+
+	/* Parameter checking   */
+	if (winNum >= TDM_MBUS_MAX_WIN)
+	{
+		mvOsPrintf("mvTdmWinGet: ERR. Invalid winNum %d\n", winNum);
+		return MV_NOT_SUPPORTED;
+	}
+	
+	decRegs.baseReg =  MV_REG_READ(TDM_WIN_BASE_REG(winNum));                                                                           
+	decRegs.sizeReg = (MV_REG_READ(TDM_WIN_CTRL_REG(winNum)) & TDM_WIN_SIZE_MASK) >>  TDM_WIN_SIZE_OFFS;
+ 
+	if (MV_OK != mvCtrlRegToAddrDec(&decRegs,&(pAddrDecWin->addrWin)))
+	{
+		mvOsPrintf("mvTdmWinGet: mvCtrlRegToAddrDec Failed \n");
+		return MV_ERROR;
+	}
+	 
+	/* attrib and targetId */
+	targetAttrib.attrib = 
+		(MV_REG_READ(TDM_WIN_CTRL_REG(winNum)) & TDM_WIN_ATTRIB_MASK) >>  TDM_WIN_ATTRIB_OFFS;
+	targetAttrib.targetId = 
+		(MV_REG_READ(TDM_WIN_CTRL_REG(winNum)) & TDM_WIN_TARGET_MASK) >>  TDM_WIN_TARGET_OFFS;
+	 
+	pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib);
+
+	/* Check if window is enabled   */
+	if (MV_REG_READ(TDM_WIN_CTRL_REG(winNum)) & TDM_WIN_ENABLE_MASK)
+	{
+		pAddrDecWin->enable = MV_TRUE;
+	}
+	else
+	{
+		pAddrDecWin->enable = MV_FALSE;
+	}
+	
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvTdmWinEnable - Enable/disable a TDM to target address window
+*
+* DESCRIPTION:
+*       This function enable/disable a TDM to target address window.
+*       According to parameter 'enable' the routine will enable the
+*       window, thus enabling TDM accesses (before enabling the window it is
+*       tested for overlapping). Otherwise, the window will be disabled.
+*
+* INPUT:
+*       winNum - TDM to target address decode window number.
+*       enable - Enable/disable parameter.
+*
+* OUTPUT:
+*       N/A
+*
+* RETURN:
+*       MV_ERROR if decode window number was wrong or enabled window overlapps.
+*
+*******************************************************************************/
+MV_STATUS mvTdmWinEnable(int winNum, MV_BOOL enable)
+{
+	MV_TDM_DEC_WIN addrDecWin;
+
+	if (MV_TRUE == enable)
+	{
+		if (winNum >= TDM_MBUS_MAX_WIN)
+		{
+			mvOsPrintf("mvTdmWinEnable:ERR. Invalid winNum%d\n",winNum);
+			return MV_ERROR;
+		}	
+		
+		/* First check for overlap with other enabled windows				*/
+		/* Get current window */
+		if (MV_OK != mvTdmWinGet(winNum, &addrDecWin))
+		{
+			mvOsPrintf("mvTdmWinEnable:ERR. targetWinGet fail\n");
+			return MV_ERROR;
+		}
+		/* Check for overlapping */
+		if (MV_FALSE == tdmWinOverlapDetect(winNum, &(addrDecWin.addrWin)))
+		{
+			/* No Overlap. Enable address decode target window */
+			MV_REG_BIT_SET(TDM_WIN_CTRL_REG(winNum), TDM_WIN_ENABLE_MASK);
+		}
+		else
+		{   /* Overlap detected	*/
+			mvOsPrintf("mvTdmWinEnable:ERR. Overlap detected\n");
+			return MV_ERROR;
+		}
+	}
+	else
+	{
+		MV_REG_BIT_RESET(TDM_WIN_CTRL_REG(winNum), TDM_WIN_ENABLE_MASK);	
+	}
+	return MV_OK;
+}
+
+
+/*******************************************************************************
+* tdmWinOverlapDetect - Detect TDM address windows overlapping
+*
+* DESCRIPTION:
+*       An unpredicted behaviour is expected in case TDM address decode 
+*       windows overlapps.
+*       This function detects TDM address decode windows overlapping of a 
+*       specified window. The function does not check the window itself for 
+*       overlapping. The function also skipps disabled address decode windows.
+*
+* INPUT:
+*       winNum      - address decode window number.
+*       pAddrDecWin - An address decode window struct.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_TRUE if the given address window overlap current address
+*       decode map, MV_FALSE otherwise, MV_ERROR if reading invalid data 
+*       from registers.
+*
+*******************************************************************************/
+static MV_STATUS tdmWinOverlapDetect(MV_U32 winNum, MV_ADDR_WIN *pAddrWin)
+{
+    MV_U32      	winNumIndex;
+    MV_TDM_DEC_WIN  	addrDecWin;
+
+    for (winNumIndex = 0; winNumIndex < TDM_MBUS_MAX_WIN; winNumIndex++)
+    {
+		/* Do not check window itself		*/
+        if (winNumIndex == winNum)
+		{
+			continue;
+		}
+		/* Do not check disabled windows	*/
+		if (MV_REG_READ(TDM_WIN_CTRL_REG(winNum)) & TDM_WIN_ENABLE_MASK)
+		{
+			/* Get window parameters 	*/
+			if (MV_OK != mvTdmWinGet(winNumIndex, &addrDecWin))
+			{
+				DB(mvOsPrintf("dmaWinOverlapDetect: ERR. TargetWinGet failed\n"));
+            		return MV_ERROR;
+			}
+
+			if (MV_TRUE == ctrlWinOverlapTest(pAddrWin, &(addrDecWin.addrWin)))
+			{
+				return MV_TRUE;
+			}        
+		}
+    }
+	return MV_FALSE;
+}
+
+/*******************************************************************************
+* mvTdmAddrDecShow - Print the TDM address decode map.
+*
+* DESCRIPTION:
+*       This function print the TDM address decode map.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+MV_VOID mvTdmAddrDecShow(MV_VOID)
+{
+	MV_TDM_DEC_WIN win;
+	int i;
+
+	mvOsOutput( "\n" );
+	mvOsOutput( "TDM:\n" );
+	mvOsOutput( "----\n" );
+
+	for( i = 0; i < TDM_MBUS_MAX_WIN; i++ )
+	{
+		memset( &win, 0, sizeof(MV_TDM_DEC_WIN) );
+
+		mvOsOutput( "win%d - ", i );
+
+		if (mvTdmWinGet(i, &win ) == MV_OK )
+		{
+			if( win.enable )
+			{
+                mvOsOutput( "%s base %08x, ",
+                mvCtrlTargetNameGet(win.target), win.addrWin.baseLow);
+                mvOsOutput( "...." );
+                mvSizePrint( win.addrWin.size );
+				mvOsOutput( "\n" );
+			}
+			else
+				mvOsOutput( "disable\n" );
+		}
+	}
+}
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTdm.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTdm.h
new file mode 100644
index 0000000000..0d3140f5e4
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTdm.h
@@ -0,0 +1,106 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvSysTdmh
+#define __INCmvSysTdmh
+
+#include "ctrlEnv/sys/mvCpuIf.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "ctrlEnv/mvCtrlEnvAddrDec.h"
+
+typedef struct _mvTdmDecWin
+{
+        MV_TARGET     target;
+        MV_ADDR_WIN   addrWin; /* An address window*/
+        MV_BOOL       enable;  /* Address decode window is enabled/disabled */ 
+} MV_TDM_DEC_WIN;
+
+MV_STATUS mvTdmWinInit(MV_VOID);
+MV_STATUS mvTdmWinSet(MV_U32 winNum, MV_TDM_DEC_WIN *pAddrDecWin);
+MV_STATUS mvTdmWinGet(MV_U32 winNum, MV_TDM_DEC_WIN *pAddrDecWin);
+MV_STATUS mvTdmWinEnable(int winNum, MV_BOOL enable);
+MV_VOID mvTdmAddrDecShow(MV_VOID);
+
+
+#define TDM_MBUS_MAX_WIN	4
+#define TDM_WIN_CTRL_REG(win)	((TDM_REG_BASE + 0x4030) + (win<<4))
+#define TDM_WIN_BASE_REG(win)	((TDM_REG_BASE +0x4034) + (win<<4))
+
+/* TDM_WIN_CTRL_REG bits */
+#define TDM_WIN_ENABLE_OFFS	0
+#define TDM_WIN_ENABLE_MASK	(1<<TDM_WIN_ENABLE_OFFS)
+#define TDM_WIN_ENABLE		1
+#define TDM_WIN_TARGET_OFFS	4
+#define TDM_WIN_TARGET_MASK	(0xf<<TDM_WIN_TARGET_OFFS)
+#define TDM_WIN_ATTRIB_OFFS	8
+#define TDM_WIN_ATTRIB_MASK	(0xff<<TDM_WIN_ATTRIB_OFFS)
+#define TDM_WIN_SIZE_OFFS	16
+#define TDM_WIN_SIZE_MASK	(0xffff<<TDM_WIN_SIZE_OFFS)
+
+/* TDM_WIN_BASE_REG bits */
+#define TDM_BASE_OFFS		16
+#define TDM_BASE_MASK		(0xffff<<TDM_BASE_OFFS)
+
+#endif /*__INCmvSysTdmh*/
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTs.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTs.c
new file mode 100644
index 0000000000..4415c7c265
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTs.c
@@ -0,0 +1,591 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED.  The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer.
+
+    *   Redistributions in binary form must reproduce the above copyright
+	notice, this list of conditions and the following disclaimer in the
+	documentation and/or other materials provided with the distribution.
+
+    *   Neither the name of Marvell nor the names of its contributors may be
+	used to endorse or promote products derived from this software without
+	specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#include "ctrlEnv/sys/mvSysTs.h"
+
+
+typedef struct _mvTsuDecWin
+{
+        MV_TARGET     target;
+        MV_ADDR_WIN   addrWin; /* An address window*/
+        MV_BOOL       enable;  /* Address decode window is enabled/disabled */
+ 
+}MV_TSU_DEC_WIN;
+
+
+MV_TARGET tsuAddrDecPrioTap[] =
+{
+#if defined(MV_INCLUDE_PEX)
+        PEX0_MEM,
+#endif
+#if defined(MV_INCLUDE_PCI)
+        PCI0_MEM,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS0)
+        SDRAM_CS0,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS1)
+        SDRAM_CS1,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS2)
+        SDRAM_CS2,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS3)
+        SDRAM_CS3,
+#endif
+#if defined(MV_INCLUDE_DEVICE_CS0)
+        DEVICE_CS0,
+#endif
+#if defined(MV_INCLUDE_DEVICE_CS1)
+        DEVICE_CS1,
+#endif
+#if defined(MV_INCLUDE_DEVICE_CS2)
+        DEVICE_CS2,
+#endif
+#if defined(MV_INCLUDE_DEVICE_CS3)
+        DEVICE_CS3,
+#endif
+#if defined(MV_INCLUDE_PEX)
+        PEX0_IO,
+#endif
+#if defined(MV_INCLUDE_PCI)
+        PCI0_IO,
+#endif
+        TBL_TERM
+};
+
+static MV_STATUS tsuWinOverlapDetect(MV_U32 winNum, MV_ADDR_WIN *pAddrWin);
+static MV_STATUS mvTsuWinSet(MV_U32 winNum, MV_TSU_DEC_WIN *pAddrDecWin);
+static MV_STATUS mvTsuWinGet(MV_U32 winNum, MV_TSU_DEC_WIN *pAddrDecWin);
+MV_STATUS mvTsuWinEnable(MV_U32 winNum,MV_BOOL enable);
+
+/*******************************************************************************
+* mvTsuWinInit
+*
+* DESCRIPTION:
+* 	Initialize the TSU unit address decode windows.
+*
+* INPUT:
+*       None.
+* OUTPUT:
+*	None.
+* RETURN:
+*       MV_OK	- on success,
+*
+*******************************************************************************/
+MV_STATUS mvTsuWinInit(void)
+{
+	MV_U32          winNum, status, winPrioIndex=0;
+	MV_TSU_DEC_WIN  tsuWin;
+	MV_CPU_DEC_WIN  cpuAddrDecWin;
+
+	/* First disable all address decode windows */
+	for(winNum = 0; winNum < TSU_MAX_DECODE_WIN; winNum++)
+	{
+		MV_REG_BIT_RESET(MV_TSU_WIN_CTRL_REG(winNum),
+				 TSU_WIN_CTRL_EN_MASK);
+	}
+
+	/* Go through all windows in user table until table terminator      */
+	for(winNum = 0; ((tsuAddrDecPrioTap[winPrioIndex] != TBL_TERM) &&
+			 (winNum < TSU_MAX_DECODE_WIN));)
+	{
+		/* first get attributes from CPU If */
+		status = mvCpuIfTargetWinGet(tsuAddrDecPrioTap[winPrioIndex],
+					     &cpuAddrDecWin);
+
+		if(MV_NO_SUCH == status)
+		{
+			winPrioIndex++;
+			continue;
+		}
+		if(MV_OK != status)
+		{
+			mvOsPrintf("mvTsuWinInit: ERR. mvCpuIfTargetWinGet failed\n");
+			return MV_ERROR;
+		}
+
+		if (cpuAddrDecWin.enable == MV_TRUE)
+		{
+			tsuWin.addrWin.baseHigh = cpuAddrDecWin.addrWin.baseHigh;
+			tsuWin.addrWin.baseLow = cpuAddrDecWin.addrWin.baseLow;
+			tsuWin.addrWin.size = cpuAddrDecWin.addrWin.size;
+			tsuWin.enable = MV_TRUE;
+			tsuWin.target = tsuAddrDecPrioTap[winPrioIndex];
+
+			if(MV_OK != mvTsuWinSet(winNum, &tsuWin))
+			{
+				mvOsPrintf("mvTsuWinInit: ERR. mvTsuWinSet failed winNum=%d\n",
+					   winNum);
+				return MV_ERROR;
+			}
+			winNum++;
+		}
+		winPrioIndex ++;
+	}
+
+	return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvTsuWinSet
+*
+* DESCRIPTION:
+*       This function sets a peripheral target (e.g. SDRAM bank0, PCI_MEM0)
+*       address window, also known as address decode window.
+*       After setting this target window, the TSU will be able to access the
+*       target within the address window.
+*
+* INPUT:
+*       winNum      - TSU to target address decode window number.
+*       pAddrDecWin - TSU target window data structure.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_ERROR	- if address window overlapps with other address decode 
+*			windows.
+*       MV_BAD_PARAM	- if base address is invalid parameter or target is
+*       		unknown.
+*
+*******************************************************************************/
+MV_STATUS mvTsuWinSet(MV_U32 winNum, MV_TSU_DEC_WIN *pAddrDecWin)
+{
+	MV_TARGET_ATTRIB    targetAttribs;
+	MV_DEC_REGS         decRegs;
+
+	/* Parameter checking   */
+	if(winNum >= TSU_MAX_DECODE_WIN)
+	{
+		mvOsPrintf("mvTsuWinSet: ERR. Invalid win num %d\n",winNum);
+		return MV_BAD_PARAM;
+	}    
+
+	/* Check if the requested window overlapps with current windows     */
+	if(MV_TRUE == tsuWinOverlapDetect(winNum, &pAddrDecWin->addrWin))
+	{
+		mvOsPrintf("mvTsuWinSet: ERR. Window %d overlap\n", winNum);
+		return MV_ERROR;
+	}
+
+	/* check if address is aligned to the size */
+	if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow,pAddrDecWin->addrWin.size))
+	{
+		mvOsPrintf("mvTsuWinSet: Error setting TSU window %d to target "
+			   "%s.\nAddress 0x%08x is unaligned to size 0x%x.\n",
+			   winNum, mvCtrlTargetNameGet(pAddrDecWin->target),
+			   pAddrDecWin->addrWin.baseLow,
+			   pAddrDecWin->addrWin.size);
+		return MV_ERROR;
+	}
+
+	decRegs.baseReg = MV_REG_READ(MV_TSU_WIN_BASE_REG(winNum));
+	decRegs.sizeReg = MV_REG_READ(MV_TSU_WIN_CTRL_REG(winNum));
+    
+	if(MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs))
+	{
+		mvOsPrintf("mvTsuWinSet: mvCtrlAddrDecToReg Failed\n");
+		return MV_ERROR;
+	}
+    
+	mvCtrlAttribGet(pAddrDecWin->target,&targetAttribs);
+    
+	/* set attributes */
+	decRegs.sizeReg &= ~TSU_WIN_CTRL_ATTR_MASK;
+	decRegs.sizeReg |= targetAttribs.attrib << TSU_WIN_CTRL_ATTR_OFFS;
+	/* set target ID */
+	decRegs.sizeReg &= ~TSU_WIN_CTRL_TARGET_MASK;
+	decRegs.sizeReg |= targetAttribs.targetId << TSU_WIN_CTRL_TARGET_OFFS;
+
+	/* for the safe side we disable the window before writing the new */
+	/* values */
+	mvTsuWinEnable(winNum, MV_FALSE);
+	MV_REG_WRITE(MV_TSU_WIN_CTRL_REG(winNum),decRegs.sizeReg);
+
+	/* Write to address decode Size Register                            */
+	MV_REG_WRITE(MV_TSU_WIN_BASE_REG(winNum), decRegs.baseReg);
+
+	/* Enable address decode target window                              */
+	if(pAddrDecWin->enable == MV_TRUE)
+	{
+		mvTsuWinEnable(winNum,MV_TRUE);
+	}
+
+	return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvTsuWinGet
+*
+* DESCRIPTION:
+*	Get TSU peripheral target address window.
+*
+* INPUT:
+*	winNum - TSU to target address decode window number.
+*
+* OUTPUT:
+*       pAddrDecWin - TSU target window data structure.
+*
+* RETURN:
+*       MV_ERROR if register parameters are invalid.
+*
+*******************************************************************************/
+MV_STATUS mvTsuWinGet(MV_U32 winNum, MV_TSU_DEC_WIN *pAddrDecWin)
+{
+	MV_DEC_REGS decRegs;
+	MV_TARGET_ATTRIB targetAttrib;
+
+	/* Parameter checking   */
+	if(winNum >= TSU_MAX_DECODE_WIN)
+	{
+		mvOsPrintf("mvTsuWinGet: ERR. Invalid winNum %d\n", winNum);
+		return MV_NOT_SUPPORTED;
+	}
+
+	decRegs.baseReg = MV_REG_READ(MV_TSU_WIN_BASE_REG(winNum));                                                                           
+	decRegs.sizeReg = MV_REG_READ(MV_TSU_WIN_CTRL_REG(winNum));
+ 
+	if(MV_OK != mvCtrlRegToAddrDec(&decRegs,&(pAddrDecWin->addrWin)))
+	{
+		mvOsPrintf("mvTsuWinGet: mvCtrlRegToAddrDec Failed \n");
+		return MV_ERROR;
+	}
+
+	/* attrib and targetId */
+	targetAttrib.attrib = 
+		(decRegs.sizeReg & TSU_WIN_CTRL_ATTR_MASK) >> TSU_WIN_CTRL_ATTR_OFFS;
+	targetAttrib.targetId = 
+		(decRegs.sizeReg & TSU_WIN_CTRL_TARGET_MASK) >> TSU_WIN_CTRL_TARGET_OFFS;
+
+	pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib);
+
+	/* Check if window is enabled   */
+	if((MV_REG_READ(MV_TSU_WIN_CTRL_REG(winNum)) & TSU_WIN_CTRL_EN_MASK))
+	{
+		pAddrDecWin->enable = MV_TRUE;
+	}
+	else
+	{
+		pAddrDecWin->enable = MV_FALSE;
+	}
+	
+	return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvTsuWinEnable
+*
+* DESCRIPTION:
+*       This function enable/disable a TSU to target address window.
+*       According to parameter 'enable' the routine will enable the
+*       window, thus enabling TSU accesses (before enabling the window it is
+*       tested for overlapping). Otherwise, the window will be disabled.
+*
+* INPUT:
+*       winNum - TSU to target address decode window number.
+*       enable - Enable / disable parameter.
+*
+* OUTPUT:
+*       N/A
+*
+* RETURN:
+*       MV_ERROR if decode window number was wrong or enabled window overlapps.
+*
+*******************************************************************************/
+MV_STATUS mvTsuWinEnable(MV_U32 winNum,MV_BOOL enable)
+{
+	MV_TSU_DEC_WIN addrDecWin;
+
+	/* Parameter checking   */
+	if(winNum >= TSU_MAX_DECODE_WIN)
+	{
+		mvOsPrintf("mvTsuWinEnable: ERR. Invalid winNum%d\n",winNum);
+		return MV_ERROR;
+	}
+
+	if(enable == MV_TRUE)
+	{
+		/* First check for overlap with other enabled windows   */
+		/* Get current window.					*/
+		if(MV_OK != mvTsuWinGet(winNum,&addrDecWin))
+		{
+			mvOsPrintf("mvTsuWinEnable: ERR. targetWinGet fail\n");
+			return MV_ERROR;
+		}
+		/* Check for overlapping.	*/
+		if(MV_FALSE == tsuWinOverlapDetect(winNum,&(addrDecWin.addrWin)))
+		{
+			/* No Overlap. Enable address decode target window   */
+			MV_REG_BIT_SET(MV_TSU_WIN_CTRL_REG(winNum),
+				       TSU_WIN_CTRL_EN_MASK);
+		}
+		else
+		{
+			/* Overlap detected */
+			mvOsPrintf("mvTsuWinEnable: ERR. Overlap detected\n");
+			return MV_ERROR;
+		}
+	}
+	else
+	{
+		/* Disable address decode target window */
+		MV_REG_BIT_RESET(MV_TSU_WIN_CTRL_REG(winNum),
+				 TSU_WIN_CTRL_EN_MASK);
+	}
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvTsuWinTargetGet
+*
+* DESCRIPTION:
+*	Get Window number associated with target
+*
+* INPUT:
+*	target	- Target ID to get the window number for.
+* OUTPUT:
+*
+* RETURN:
+*       window number or 0xFFFFFFFF on error.
+*
+*******************************************************************************/
+MV_U32  mvTsuWinTargetGet(MV_TARGET target)
+{
+	MV_TSU_DEC_WIN decWin;
+	MV_U32 winNum;
+
+	/* Check parameters */
+	if(target >= MAX_TARGETS)
+	{
+		mvOsPrintf("mvTsuWinTargetGet: target %d is Illigal\n", target);
+		return 0xffffffff;
+	}
+
+	for(winNum = 0; winNum < TSU_MAX_DECODE_WIN; winNum++)
+	{
+		if(mvTsuWinGet(winNum,&decWin) != MV_OK)
+		{
+			mvOsPrintf("mvTsuWinGet: window returned error\n");
+			return 0xffffffff;
+		}
+
+		if (decWin.enable == MV_TRUE)
+		{
+			if(decWin.target == target)
+			{
+				return winNum;
+			}
+		}
+	}
+	return 0xFFFFFFFF;
+}
+
+
+/*******************************************************************************
+* tsuWinOverlapDetect
+*
+* DESCRIPTION:
+*	Detect TSU address windows overlapping
+*	An unpredicted behaviur is expected in case TSU address decode
+*	windows overlapps.
+*	This function detects TSU address decode windows overlapping of a
+*	specified window. The function does not check the window itself for
+*	overlapping. The function also skipps disabled address decode windows.
+*
+* INPUT:
+*       winNum      - address decode window number.
+*       pAddrDecWin - An address decode window struct.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_TRUE if the given address window overlap current address
+*       decode map, MV_FALSE otherwise, MV_ERROR if reading invalid data
+*       from registers.
+*
+*******************************************************************************/
+static MV_STATUS tsuWinOverlapDetect(MV_U32 winNum, MV_ADDR_WIN *pAddrWin)
+{
+	MV_U32              ctrlReg;
+	MV_U32              winNumIndex;
+	MV_TSU_DEC_WIN      addrDecWin;
+
+	for(winNumIndex = 0; winNumIndex < TSU_MAX_DECODE_WIN; winNumIndex++)
+	{
+		/* Do not check window itself           */
+		if(winNumIndex == winNum)
+		{
+			continue;
+		}
+
+		/* Do not check disabled windows        */
+		ctrlReg = MV_REG_READ(MV_TSU_WIN_CTRL_REG(winNumIndex));
+		if((ctrlReg & TSU_WIN_CTRL_EN_MASK) == 0)
+		{
+			continue;
+		}
+
+		/* Get window parameters        */
+		if (MV_OK != mvTsuWinGet(winNumIndex, &addrDecWin))
+		{
+			mvOsPrintf("tsuWinOverlapDetect: ERR. mvTsuWinGet failed\n");
+			return MV_ERROR;
+		}
+
+		if (MV_TRUE == ctrlWinOverlapTest(pAddrWin, &(addrDecWin.addrWin)))
+		{
+			return MV_TRUE;
+		}
+	}
+	return MV_FALSE;
+}
+
+
+/*******************************************************************************
+* mvTsuAddrDecShow
+*
+* DESCRIPTION:
+*	Print the TSU address decode map.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+void mvTsuAddrDecShow(void)
+{
+	MV_TSU_DEC_WIN  win;
+	int             i;
+
+	if (MV_FALSE == mvCtrlPwrClckGet(TS_UNIT_ID, 0)) 
+		return;
+
+	mvOsOutput( "\n" );
+	mvOsOutput( "TSU:\n");
+	mvOsOutput( "----\n" );
+
+	for(i = 0; i < TSU_MAX_DECODE_WIN; i++)
+	{
+		memset(&win, 0, sizeof(TSU_MAX_DECODE_WIN));
+		mvOsOutput( "win%d - ", i );
+
+		if(mvTsuWinGet(i, &win ) == MV_OK )
+		{
+			if(win.enable == MV_TRUE)
+			{
+				mvOsOutput("%s base %08x, ",
+					   mvCtrlTargetNameGet(win.target),
+					   win.addrWin.baseLow);
+				mvOsOutput( "...." );
+				mvSizePrint(win.addrWin.size );
+				mvOsOutput( "\n" );
+			}
+			else
+			{
+				mvOsOutput( "disable\n" );
+			}
+		}
+	}
+	return;
+}
+
+
+/*******************************************************************************
+* mvTsuInit
+*
+* DESCRIPTION:
+* 	Initialize the TSU unit, and get unit out of reset.
+*
+* INPUT:
+*       coreClock	- The core clock at which the TSU should operate.
+*       mode		- The mode on configure the unit into (serial/parallel).
+* 	memHandle	- Memory handle used for memory allocations.
+* OUTPUT:
+*	None.
+* RETURN:
+*       MV_OK	- on success,
+*
+*******************************************************************************/
+MV_STATUS mvTsuInit(MV_TSU_CORE_CLOCK coreClock, MV_TSU_PORTS_MODE mode,
+	            void *osHandle)
+{
+	MV_STATUS status;
+
+	status = mvTsuWinInit();
+	if(status == MV_OK)
+		status = mvTsuHalInit(coreClock,mode,osHandle);
+
+	return status;
+}
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTs.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTs.h
new file mode 100644
index 0000000000..42825893cd
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTs.h
@@ -0,0 +1,110 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+        this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvSysTsh
+#define __INCmvSysTsh
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* includes */
+#include "ts/mvTsu.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "ctrlEnv/mvCtrlEnvAddrDec.h"
+
+#define TSU_MAX_DECODE_WIN	4
+
+
+/*******************************************/
+/* TSU Windows Registers                   */
+/*******************************************/
+#define MV_TSU_WIN_CTRL_REG(win)	(TSU_GLOBAL_REG_BASE +0x30 + 0x10 * win)
+#define MV_TSU_WIN_BASE_REG(win)	(TSU_GLOBAL_REG_BASE +0x34 + 0x10 * win)
+
+/* TSU windows control register.		*/
+#define TSU_WIN_CTRL_EN_MASK		(0x1 << 0)
+#define TSU_WIN_CTRL_TARGET_OFFS	4
+#define TSU_WIN_CTRL_TARGET_MASK	(0xF << TSU_WIN_CTRL_TARGET_OFFS)
+#define TSU_WIN_CTRL_ATTR_OFFS		8
+#define TSU_WIN_CTRL_ATTR_MASK		(0xFF << TSU_WIN_CTRL_ATTR_OFFS)
+#define TSU_WIN_CTRL_SIZE_OFFS		16
+#define TSU_WIN_CTRL_SIZE_MASK		(0xFFFF << TSU_WIN_CTRL_SIZE_OFFS)
+
+/* TSU windows base register.			*/
+#define TSU_WIN_BASE_OFFS		16
+#define TSU_WIN_BASE_MASK		(0xFFFF << TSU_WIN_BASE_OFFS)
+
+MV_STATUS mvTsuWinInit(void);
+
+void mvTsuAddrDecShow(void);
+MV_STATUS mvTsuInit(MV_TSU_CORE_CLOCK coreClock, MV_TSU_PORTS_MODE mode,
+	            void *osHandle);
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __INCmvTsh */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysUsb.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysUsb.c
new file mode 100644
index 0000000000..195b5e13e3
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysUsb.c
@@ -0,0 +1,497 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED.  The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+        this list of conditions and the following disclaimer.
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    *   Neither the name of Marvell nor the names of its contributors may be
+        used to endorse or promote products derived from this software without
+        specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "ctrlEnv/sys/mvSysUsb.h"
+
+MV_TARGET usbAddrDecPrioTab[] =
+{
+#if defined(MV_INCLUDE_SDRAM_CS0)
+    SDRAM_CS0,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS1)
+    SDRAM_CS1,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS2)
+    SDRAM_CS2,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS3)
+    SDRAM_CS3,
+#endif
+#if defined(MV_INCLUDE_CESA) && defined(USB_UNDERRUN_WA)
+    CRYPT_ENG,
+#endif
+#if defined(MV_INCLUDE_PEX)
+    PEX0_MEM,
+#endif
+    TBL_TERM
+};
+
+
+
+MV_STATUS   mvUsbInit(int dev, MV_BOOL isHost)
+{
+    MV_STATUS       status;
+
+    status = mvUsbWinInit(dev);
+    if(status != MV_OK)
+        return status;
+
+    return mvUsbHalInit(dev, isHost);
+}
+
+
+/*******************************************************************************
+* usbWinOverlapDetect - Detect USB address windows overlapping
+*
+* DESCRIPTION:
+*       An unpredicted behaviur is expected in case USB address decode
+*       windows overlapps.
+*       This function detects USB address decode windows overlapping of a
+*       specified window. The function does not check the window itself for
+*       overlapping. The function also skipps disabled address decode windows.
+*
+* INPUT:
+*       winNum      - address decode window number.
+*       pAddrDecWin - An address decode window struct.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_TRUE if the given address window overlap current address
+*       decode map, MV_FALSE otherwise, MV_ERROR if reading invalid data
+*       from registers.
+*
+*******************************************************************************/
+static MV_STATUS usbWinOverlapDetect(int dev, MV_U32 winNum,
+                                     MV_ADDR_WIN *pAddrWin)
+{
+    MV_U32          winNumIndex;
+    MV_DEC_WIN      addrDecWin;
+
+    for(winNumIndex=0; winNumIndex<MV_USB_MAX_ADDR_DECODE_WIN; winNumIndex++)
+    {
+        /* Do not check window itself       */
+        if (winNumIndex == winNum)
+        {
+            continue;
+        }
+
+        /* Get window parameters    */
+        if (MV_OK != mvUsbWinGet(dev, winNumIndex, &addrDecWin))
+        {
+            mvOsPrintf("%s: ERR. TargetWinGet failed\n", __FUNCTION__);
+            return MV_ERROR;
+        }
+
+        /* Do not check disabled windows    */
+        if(addrDecWin.enable == MV_FALSE)
+        {
+            continue;
+        }
+
+        if (MV_TRUE == ctrlWinOverlapTest(pAddrWin, &(addrDecWin.addrWin)))
+        {
+            return MV_TRUE;
+        }
+    }
+    return MV_FALSE;
+}
+
+/*******************************************************************************
+* mvUsbWinSet - Set USB target address window
+*
+* DESCRIPTION:
+*       This function sets a peripheral target (e.g. SDRAM bank0, PCI_MEM0)
+*       address window, also known as address decode window.
+*       After setting this target window, the USB will be able to access the
+*       target within the address window.
+*
+* INPUT:
+*       winNum      - USB target address decode window number.
+*       pAddrDecWin - USB target window data structure.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_ERROR if address window overlapps with other address decode windows.
+*       MV_BAD_PARAM if base address is invalid parameter or target is
+*       unknown.
+*
+*******************************************************************************/
+MV_STATUS mvUsbWinSet(int dev, MV_U32 winNum, MV_DEC_WIN *pDecWin)
+{
+    MV_DEC_WIN_PARAMS   winParams;
+    MV_U32              sizeReg, baseReg;
+
+    /* Parameter checking   */
+    if (winNum >= MV_USB_MAX_ADDR_DECODE_WIN)
+    {
+        mvOsPrintf("%s: ERR. Invalid win num %d\n",__FUNCTION__, winNum);
+        return MV_BAD_PARAM;
+    }
+
+    /* Check if the requested window overlapps with current windows         */
+    if (MV_TRUE == usbWinOverlapDetect(dev, winNum, &pDecWin->addrWin))
+    {
+        mvOsPrintf("%s: ERR. Window %d overlap\n", __FUNCTION__, winNum);
+        return MV_ERROR;
+    }
+
+    /* check if address is aligned to the size */
+    if(MV_IS_NOT_ALIGN(pDecWin->addrWin.baseLow, pDecWin->addrWin.size))
+    {
+        mvOsPrintf("mvUsbWinSet:Error setting USB window %d to "\
+                   "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n",
+                   winNum,
+                   mvCtrlTargetNameGet(pDecWin->target),
+                   pDecWin->addrWin.baseLow,
+                   pDecWin->addrWin.size);
+        return MV_ERROR;
+    }
+
+    if(MV_OK != mvCtrlAddrDecToParams(pDecWin, &winParams))
+    {
+        mvOsPrintf("%s: mvCtrlAddrDecToParams Failed\n", __FUNCTION__);
+        return MV_ERROR;
+    }
+
+    /* set Size, Attributes and TargetID */
+    sizeReg = (((winParams.targetId << MV_USB_WIN_TARGET_OFFSET) & MV_USB_WIN_TARGET_MASK) |
+               ((winParams.attrib   << MV_USB_WIN_ATTR_OFFSET)   & MV_USB_WIN_ATTR_MASK)   |
+               ((winParams.size << MV_USB_WIN_SIZE_OFFSET) & MV_USB_WIN_SIZE_MASK));
+
+#if defined(MV645xx) || defined(MV646xx)
+    /* If window is DRAM with HW cache coherency, make sure bit2 is set */
+    sizeReg &= ~MV_USB_WIN_BURST_WR_LIMIT_MASK;
+
+    if((MV_TARGET_IS_DRAM(pDecWin->target)) &&
+       (pDecWin->addrWinAttr.cachePolicy != NO_COHERENCY))
+    {
+        sizeReg |= MV_USB_WIN_BURST_WR_32BIT_LIMIT;
+    }
+    else
+    {
+        sizeReg |= MV_USB_WIN_BURST_WR_NO_LIMIT;
+    }
+#endif /* MV645xx || MV646xx */
+
+    if (pDecWin->enable == MV_TRUE)
+    {
+        sizeReg |= MV_USB_WIN_ENABLE_MASK;
+    }
+    else
+    {
+        sizeReg &= ~MV_USB_WIN_ENABLE_MASK;
+    }
+
+    /* Update Base value  */
+    baseReg = (winParams.baseAddr & MV_USB_WIN_BASE_MASK);
+
+    MV_REG_WRITE( MV_USB_WIN_CTRL_REG(dev, winNum), sizeReg);
+    MV_REG_WRITE( MV_USB_WIN_BASE_REG(dev, winNum), baseReg);
+
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvUsbWinGet - Get USB peripheral target address window.
+*
+* DESCRIPTION:
+*       Get USB peripheral target address window.
+*
+* INPUT:
+*       winNum - USB target address decode window number.
+*
+* OUTPUT:
+*       pDecWin - USB target window data structure.
+*
+* RETURN:
+*       MV_ERROR if register parameters are invalid.
+*
+*******************************************************************************/
+MV_STATUS mvUsbWinGet(int dev, MV_U32 winNum, MV_DEC_WIN *pDecWin)
+{
+    MV_DEC_WIN_PARAMS   winParam;
+    MV_U32              sizeReg, baseReg;
+
+    /* Parameter checking   */
+    if (winNum >= MV_USB_MAX_ADDR_DECODE_WIN)
+    {
+        mvOsPrintf("%s (dev=%d): ERR. Invalid winNum %d\n",
+                    __FUNCTION__, dev, winNum);
+        return MV_NOT_SUPPORTED;
+    }
+
+    baseReg = MV_REG_READ( MV_USB_WIN_BASE_REG(dev, winNum) );
+    sizeReg = MV_REG_READ( MV_USB_WIN_CTRL_REG(dev, winNum) );
+
+   /* Check if window is enabled   */
+    if(sizeReg & MV_USB_WIN_ENABLE_MASK)
+    {
+        pDecWin->enable = MV_TRUE;
+
+        /* Extract window parameters from registers */
+        winParam.targetId = (sizeReg & MV_USB_WIN_TARGET_MASK) >> MV_USB_WIN_TARGET_OFFSET;
+        winParam.attrib   = (sizeReg & MV_USB_WIN_ATTR_MASK) >> MV_USB_WIN_ATTR_OFFSET;
+        winParam.size     = (sizeReg & MV_USB_WIN_SIZE_MASK) >> MV_USB_WIN_SIZE_OFFSET;
+        winParam.baseAddr = (baseReg & MV_USB_WIN_BASE_MASK);
+
+        /* Translate the decode window parameters to address decode struct */
+        if (MV_OK != mvCtrlParamsToAddrDec(&winParam, pDecWin))
+        {
+            mvOsPrintf("Failed to translate register parameters to USB address" \
+                       " decode window structure\n");
+            return MV_ERROR;
+        }
+    }
+    else
+    {
+        pDecWin->enable = MV_FALSE;
+    }
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvUsbWinInit -
+*
+* INPUT:
+*
+* OUTPUT:
+*
+* RETURN:
+*       MV_ERROR if register parameters are invalid.
+*
+*******************************************************************************/
+MV_STATUS   mvUsbWinInit(int dev)
+{
+    MV_STATUS       status;
+    MV_DEC_WIN      usbWin;
+    MV_CPU_DEC_WIN  cpuAddrDecWin;
+    int             winNum;
+    MV_U32          winPrioIndex = 0;
+
+    /* First disable all address decode windows */
+    for(winNum = 0; winNum < MV_USB_MAX_ADDR_DECODE_WIN; winNum++)
+    {
+        MV_REG_BIT_RESET(MV_USB_WIN_CTRL_REG(dev, winNum), MV_USB_WIN_ENABLE_MASK);
+    }
+
+    /* Go through all windows in user table until table terminator          */
+    winNum = 0;
+    while( (usbAddrDecPrioTab[winPrioIndex] != TBL_TERM) &&
+           (winNum < MV_USB_MAX_ADDR_DECODE_WIN) )
+    {
+        /* first get attributes from CPU If */
+        status = mvCpuIfTargetWinGet(usbAddrDecPrioTab[winPrioIndex],
+                                     &cpuAddrDecWin);
+
+        if(MV_NO_SUCH == status)
+        {
+            winPrioIndex++;
+            continue;
+        }
+        if (MV_OK != status)
+        {
+            mvOsPrintf("%s: ERR. mvCpuIfTargetWinGet failed\n", __FUNCTION__);
+            return MV_ERROR;
+        }
+
+        if (cpuAddrDecWin.enable == MV_TRUE)
+        {
+            usbWin.addrWin.baseHigh = cpuAddrDecWin.addrWin.baseHigh;
+            usbWin.addrWin.baseLow  = cpuAddrDecWin.addrWin.baseLow;
+            usbWin.addrWin.size     = cpuAddrDecWin.addrWin.size;
+            usbWin.enable           = MV_TRUE;
+            usbWin.target           = usbAddrDecPrioTab[winPrioIndex];
+
+#if defined(MV645xx) || defined(MV646xx)
+            /* Get the default attributes for that target window */
+            mvCtrlDefAttribGet(usbWin.target, &usbWin.addrWinAttr);
+#endif /* MV645xx || MV646xx */
+
+            if(MV_OK != mvUsbWinSet(dev, winNum, &usbWin))
+            {
+                return MV_ERROR;
+            }
+            winNum++;
+        }
+        winPrioIndex++;
+    }
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvUsbAddrDecShow - Print the USB address decode map.
+*
+* DESCRIPTION:
+*       This function print the USB address decode map.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+MV_VOID mvUsbAddrDecShow(MV_VOID)
+{
+    MV_DEC_WIN  addrDecWin;
+    int         i, winNum;
+
+    mvOsOutput( "\n" );
+    mvOsOutput( "USB:\n" );
+    mvOsOutput( "----\n" );
+
+    for(i=0; i<mvCtrlUsbMaxGet(); i++)
+    {
+        mvOsOutput( "Device %d:\n", i);
+
+        for(winNum = 0; winNum < MV_USB_MAX_ADDR_DECODE_WIN; winNum++)
+        {
+            memset(&addrDecWin, 0, sizeof(MV_DEC_WIN) );
+
+            mvOsOutput( "win%d - ", winNum );
+
+            if( mvUsbWinGet(i, winNum, &addrDecWin ) == MV_OK )
+            {
+                if( addrDecWin.enable )
+                {
+                    mvOsOutput( "%s base %08x, ",
+                        mvCtrlTargetNameGet(addrDecWin.target), addrDecWin.addrWin.baseLow );
+
+                    mvSizePrint( addrDecWin.addrWin.size );
+
+#if defined(MV645xx) || defined(MV646xx)
+                    switch( addrDecWin.addrWinAttr.swapType)
+                    {
+                        case MV_BYTE_SWAP:
+                            mvOsOutput( "BYTE_SWAP, " );
+                            break;
+                        case MV_NO_SWAP:
+                            mvOsOutput( "NO_SWAP  , " );
+                            break;
+                        case MV_BYTE_WORD_SWAP:
+                            mvOsOutput( "BYTE_WORD_SWAP, " );
+                            break;
+                        case MV_WORD_SWAP:
+                            mvOsOutput( "WORD_SWAP, " );
+                            break;
+                        default:
+                            mvOsOutput( "SWAP N/A , " );
+                    }
+
+                    switch( addrDecWin.addrWinAttr.cachePolicy )
+                    {
+                        case NO_COHERENCY:
+                            mvOsOutput( "NO_COHERENCY , " );
+                            break;
+                        case WT_COHERENCY:
+                            mvOsOutput( "WT_COHERENCY , " );
+                            break;
+                        case WB_COHERENCY:
+                            mvOsOutput( "WB_COHERENCY , " );
+                            break;
+                        default:
+                            mvOsOutput( "COHERENCY N/A, " );
+                    }
+
+                    switch( addrDecWin.addrWinAttr.pcixNoSnoop )
+                    {
+                        case 0:
+                            mvOsOutput( "PCI-X NS inactive, " );
+                            break;
+                        case 1:
+                            mvOsOutput( "PCI-X NS active  , " );
+                            break;
+                        default:
+                            mvOsOutput( "PCI-X NS N/A     , " );
+                    }
+
+                    switch( addrDecWin.addrWinAttr.p2pReq64 )
+                    {
+                        case 0:
+                            mvOsOutput( "REQ64 force" );
+                            break;
+                        case 1:
+                            mvOsOutput( "REQ64 detect" );
+                            break;
+                        default:
+                            mvOsOutput( "REQ64 N/A" );
+                    }
+#endif /* MV645xx || MV646xx */
+                    mvOsOutput( "\n" );
+                }
+                else
+                    mvOsOutput( "disable\n" );
+            }
+        }
+    }
+}
+
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysUsb.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysUsb.h
new file mode 100644
index 0000000000..07f98de9c9
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysUsb.h
@@ -0,0 +1,125 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+        this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvSysUsbh
+#define __INCmvSysUsbh
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* includes */
+#include "usb/mvUsb.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "ctrlEnv/mvCtrlEnvAddrDec.h"
+
+#define MV_USB_MAX_ADDR_DECODE_WIN  4
+
+/*******************************************/
+/* USB Bridge Registers                    */
+/*******************************************/
+#define MV_USB_BRIDGE_CTRL_REG(dev)              (USB_REG_BASE(dev) + 0x300)
+
+#define MV_USB_WIN_CTRL_REG(dev, win)        (USB_REG_BASE(dev) + 0x320 + ((win)<<4)) 
+#define MV_USB_WIN_BASE_REG(dev, win)        (USB_REG_BASE(dev) + 0x324 + ((win)<<4))
+
+/* BITs in Windows 0-3 Control and Base Registers */
+#define MV_USB_WIN_ENABLE_BIT               0
+#define MV_USB_WIN_ENABLE_MASK              (1 << MV_USB_WIN_ENABLE_BIT)
+
+#define MV_USB_WIN_BURST_WR_LIMIT_BIT       1
+#define MV_USB_WIN_BURST_WR_LIMIT_MASK      (1 << MV_USB_WIN_BURST_WR_LIMIT_BIT)
+#define MV_USB_WIN_BURST_WR_NO_LIMIT        (0 << MV_USB_WIN_BURST_WR_LIMIT_BIT)
+#define MV_USB_WIN_BURST_WR_32BIT_LIMIT     (1 << MV_USB_WIN_BURST_WR_LIMIT_BIT)
+
+#define MV_USB_WIN_TARGET_OFFSET            4
+#define MV_USB_WIN_TARGET_MASK              (0xF << MV_USB_WIN_TARGET_OFFSET)
+
+#define MV_USB_WIN_ATTR_OFFSET              8
+#define MV_USB_WIN_ATTR_MASK                (0xFF << MV_USB_WIN_ATTR_OFFSET)
+
+#define MV_USB_WIN_SIZE_OFFSET              16
+#define MV_USB_WIN_SIZE_MASK                (0xFFFF << MV_USB_WIN_SIZE_OFFSET)
+
+#define MV_USB_WIN_BASE_OFFSET              16
+#define MV_USB_WIN_BASE_MASK                (0xFFFF << MV_USB_WIN_BASE_OFFSET)
+
+
+#define MV_USB_BRIDGE_IPG_REG(dev)          (USB_REG_BASE(dev) + 0x360)
+
+
+MV_STATUS   mvUsbInit(int dev, MV_BOOL isHost);
+
+MV_STATUS   mvUsbWinInit(int dev);
+MV_STATUS   mvUsbWinSet(int dev, MV_U32 winNum, MV_DEC_WIN *pAddrWin);
+MV_STATUS   mvUsbWinGet(int dev, MV_U32 winNum, MV_DEC_WIN *pAddrWin);
+
+void        mvUsbAddrDecShow(void);
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __INCmvUsbh */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysXor.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysXor.c
new file mode 100644
index 0000000000..f9d0ab37d4
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysXor.c
@@ -0,0 +1,662 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "xor/mvXor.h"
+#include "mvSysXor.h"
+
+/* defines  */
+#ifdef MV_DEBUG
+	#define DB(x)	x
+#else
+	#define DB(x)
+#endif	
+
+
+static MV_STATUS xorWinOverlapDetect(MV_U32 unit,MV_U32 winNum, MV_ADDR_WIN *pAddrWin);
+
+MV_TARGET xorAddrDecPrioTap[] = 
+{
+#if defined(MV_INCLUDE_DEVICE_CS0)
+    DEVICE_CS0,
+#endif
+#if defined(MV_INCLUDE_PEX)
+	PEX0_MEM,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS0)
+    SDRAM_CS0,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS1)
+    SDRAM_CS1,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS2)
+    SDRAM_CS2,
+#endif
+#if defined(MV_INCLUDE_SDRAM_CS3)
+    SDRAM_CS3,
+#endif
+#if defined(MV_INCLUDE_DEVICE_CS1)
+    DEVICE_CS1,
+#endif
+#if defined(MV_INCLUDE_CESA)
+   CRYPT_ENG,
+#endif 
+	TBL_TERM
+};
+static MV_STATUS mvXorInitWinsUnit (MV_U32 unit)
+{
+	MV_U32         winNum;
+	MV_XOR_DEC_WIN addrDecWin;
+	MV_CPU_DEC_WIN cpuAddrDecWin;
+	MV_U32          status;
+	MV_U32			winPrioIndex=0;
+
+	/* Initiate XOR address decode */
+
+	/* First disable all address decode windows */
+	for(winNum = 0; winNum < XOR_MAX_ADDR_DEC_WIN; winNum++)
+	{
+	    mvXorTargetWinEnable(unit,winNum, MV_FALSE);
+	}
+	
+	/* Go through all windows in user table until table terminator			*/
+	for (winNum = 0; ((xorAddrDecPrioTap[winPrioIndex] != TBL_TERM) &&
+					(winNum < XOR_MAX_ADDR_DEC_WIN));)
+	{
+		/* first get attributes from CPU If */
+		status = mvCpuIfTargetWinGet(xorAddrDecPrioTap[winPrioIndex], 
+									 &cpuAddrDecWin);
+
+        if(MV_NO_SUCH == status)
+        {
+            winPrioIndex++;
+            continue;
+        }
+		if (MV_OK != status)
+		{
+            mvOsPrintf("%s: ERR. mvCpuIfTargetWinGet failed\n", __FUNCTION__);
+			return MV_ERROR;
+		}
+
+	
+        if (cpuAddrDecWin.enable == MV_TRUE)
+		{
+
+			addrDecWin.target           = xorAddrDecPrioTap[winPrioIndex];
+			addrDecWin.addrWin.baseLow  = cpuAddrDecWin.addrWin.baseLow; 
+			addrDecWin.addrWin.baseHigh = cpuAddrDecWin.addrWin.baseHigh; 
+			addrDecWin.addrWin.size     = cpuAddrDecWin.addrWin.size;    
+			addrDecWin.enable           = MV_TRUE;
+	
+			if (MV_OK != mvXorTargetWinSet(unit,winNum, &addrDecWin))
+			{
+				DB(mvOsPrintf("mvXorInit: ERR. mvDmaTargetWinSet failed\n"));
+				return MV_ERROR;
+			}
+			winNum++;
+		}
+		winPrioIndex++;	
+        
+	}
+    
+	return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvXorInit - Initialize XOR engine
+*
+* DESCRIPTION:
+*		This function initialize XOR unit. It set the default address decode
+*		windows of the unit.
+*		Note that if the address window is disabled in xorAddrDecMap, the
+*		window parameters will be set but the window will remain disabled.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_BAD_PARAM if parameters to function invalid, MV_OK otherwise.
+*******************************************************************************/
+MV_STATUS mvXorInit (MV_VOID)
+{
+	MV_U32         i;
+
+	/* Initiate XOR address decode */
+	for(i = 0; i < MV_XOR_MAX_UNIT; i++)
+	    mvXorInitWinsUnit(i);
+
+	mvXorHalInit(MV_XOR_MAX_CHAN);	
+    
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvXorTargetWinSet - Set XOR target address window
+*
+* DESCRIPTION:
+*       This function sets a peripheral target (e.g. SDRAM bank0, PCI_MEM0) 
+*       address window. After setting this target window, the XOR will be 
+*       able to access the target within the address window. 
+*
+* INPUT:
+*	    winNum - One of the possible XOR memory decode windows.
+*       target - Peripheral target enumerator.
+*       base   - Window base address.
+*       size   - Window size.
+*       enable - Window enable/disable.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_BAD_PARAM if parameters to function invalid, MV_OK otherwise.
+*
+*******************************************************************************/
+MV_STATUS mvXorTargetWinSet(MV_U32 unit, MV_U32 winNum, MV_XOR_DEC_WIN *pAddrDecWin)
+{
+    MV_DEC_REGS xorDecRegs;
+	MV_TARGET_ATTRIB targetAttribs;
+    MV_U32      chan;
+    
+    /* Parameter checking */
+    if (winNum >= XOR_MAX_ADDR_DEC_WIN)
+    {
+		DB(mvOsPrintf("%s: ERR. Invalid win num %d\n",__FUNCTION__, winNum));
+        return MV_BAD_PARAM;
+    }
+    if (pAddrDecWin == NULL)
+    {
+        DB(mvOsPrintf("%s: ERR. pAddrDecWin is NULL pointer\n", __FUNCTION__ ));
+        return MV_BAD_PTR;
+    }                                         
+    /* Check if the requested window overlaps with current windows */
+    if (MV_TRUE == xorWinOverlapDetect(unit, winNum, &pAddrDecWin->addrWin))
+    {
+	DB(mvOsPrintf("%s: ERR. Window %d overlap\n",__FUNCTION__,winNum));
+	return MV_ERROR;
+    }                              
+
+    xorDecRegs.baseReg = MV_REG_READ(XOR_BASE_ADDR_REG(unit,winNum));
+    xorDecRegs.sizeReg = MV_REG_READ(XOR_SIZE_MASK_REG(unit,winNum));
+
+    /* Get Base Address and size registers values */
+    if(MV_OK != mvCtrlAddrDecToReg(&pAddrDecWin->addrWin, &xorDecRegs))
+    {
+		DB(mvOsPrintf("%s: ERR. Invalid addr dec window\n",__FUNCTION__));
+        return MV_BAD_PARAM;
+	}
+    
+
+	mvCtrlAttribGet(pAddrDecWin->target,&targetAttribs);
+
+	/* set attributes */
+	xorDecRegs.baseReg &= ~XEBARX_ATTR_MASK;
+	xorDecRegs.baseReg |= targetAttribs.attrib << XEBARX_ATTR_OFFS;
+	/* set target ID */
+	xorDecRegs.baseReg &= ~XEBARX_TARGET_MASK;
+	xorDecRegs.baseReg |= targetAttribs.targetId << XEBARX_TARGET_OFFS;
+
+
+    /* Write to address decode Base Address Register */
+	MV_REG_WRITE(XOR_BASE_ADDR_REG(unit,winNum), xorDecRegs.baseReg);
+    
+    /* Write to Size Register */
+	MV_REG_WRITE(XOR_SIZE_MASK_REG(unit,winNum), xorDecRegs.sizeReg);
+    
+    for (chan = 0; chan < MV_XOR_MAX_CHAN_PER_UNIT; chan++)
+    {
+        if (pAddrDecWin->enable)
+        {
+            MV_REG_BIT_SET(XOR_WINDOW_CTRL_REG(unit,chan),
+                           XEXWCR_WIN_EN_MASK(winNum));
+        }
+        else
+        {
+            MV_REG_BIT_RESET(XOR_WINDOW_CTRL_REG(unit,chan),
+                             XEXWCR_WIN_EN_MASK(winNum));
+        }
+    }
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvXorTargetWinGet - Get xor peripheral target address window.
+*
+* DESCRIPTION:
+*		Get xor peripheral target address window.
+*
+* INPUT:
+*	  winNum - One of the possible XOR memory decode windows.
+*
+* OUTPUT:
+*       base   - Window base address.
+*       size   - Window size.
+*       enable - window enable/disable.
+*
+* RETURN:
+*       MV_BAD_PARAM if parameters to function invalid, MV_OK otherwise.
+*
+*******************************************************************************/
+MV_STATUS mvXorTargetWinGet(MV_U32 unit,MV_U32 winNum, MV_XOR_DEC_WIN *pAddrDecWin)
+{
+    MV_DEC_REGS xorDecRegs;
+	MV_TARGET_ATTRIB targetAttrib;
+    MV_U32      chan=0,chanWinEn;
+    
+    /* Parameter checking */
+    if (winNum >= XOR_MAX_ADDR_DEC_WIN)
+    {
+		DB(mvOsPrintf("%s: ERR. Invalid win num %d\n",__FUNCTION__ , winNum));
+        return MV_ERROR;
+    }
+
+    if (NULL == pAddrDecWin)
+    {
+        DB(mvOsPrintf("%s: ERR. pAddrDecWin is NULL pointer\n", __FUNCTION__ ));
+        return MV_BAD_PTR;
+    }
+
+    chanWinEn = MV_REG_READ(XOR_WINDOW_CTRL_REG(unit,0)) & XEXWCR_WIN_EN_MASK(winNum);
+    
+    for (chan = 0; chan < MV_XOR_MAX_CHAN_PER_UNIT; chan++) /* we should scan here all channels per unit */
+    {
+    	/* Check if enable bit is equal for all channels */
+        if ((MV_REG_READ(XOR_WINDOW_CTRL_REG(unit,chan)) & 
+             XEXWCR_WIN_EN_MASK(winNum)) != chanWinEn)
+        {
+            mvOsPrintf("%s: ERR. Window enable field must be equal in "
+                              "all channels(chan=%d)\n",__FUNCTION__, chan);
+            return MV_ERROR;
+        }
+    }
+
+
+
+	xorDecRegs.baseReg  = MV_REG_READ(XOR_BASE_ADDR_REG(unit,winNum));
+	xorDecRegs.sizeReg  = MV_REG_READ(XOR_SIZE_MASK_REG(unit,winNum));
+
+	if (MV_OK != mvCtrlRegToAddrDec(&xorDecRegs, &pAddrDecWin->addrWin))
+	{
+		mvOsPrintf("%s: ERR. mvCtrlRegToAddrDec failed\n", __FUNCTION__);
+		return MV_ERROR;
+	}
+
+	/* attrib and targetId */
+	targetAttrib.attrib = 
+		(xorDecRegs.baseReg & XEBARX_ATTR_MASK) >> XEBARX_ATTR_OFFS;
+	targetAttrib.targetId = 
+		(xorDecRegs.baseReg & XEBARX_TARGET_MASK) >> XEBARX_TARGET_OFFS;
+
+
+	pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib);
+
+	if(chanWinEn)
+	{
+		pAddrDecWin->enable = MV_TRUE;
+	}
+	else pAddrDecWin->enable = MV_FALSE;
+	
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvXorTargetWinEnable - Enable/disable a Xor address decode window
+*
+* DESCRIPTION:
+*       This function enable/disable a XOR address decode window.
+*       if parameter 'enable' == MV_TRUE the routine will enable the 
+*       window, thus enabling XOR accesses (before enabling the window it is 
+*       tested for overlapping). Otherwise, the window will be disabled.
+*
+* INPUT:
+*       winNum - Decode window number.
+*       enable - Enable/disable parameter.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_BAD_PARAM if parameters to function invalid, MV_OK otherwise.
+*
+*******************************************************************************/
+MV_STATUS mvXorTargetWinEnable(MV_U32 unit,MV_U32 winNum, MV_BOOL enable)
+{
+	MV_XOR_DEC_WIN  addrDecWin;
+    MV_U32          chan;
+    
+	/* Parameter checking   */               
+    if (winNum >= XOR_MAX_ADDR_DEC_WIN)
+    {
+        DB(mvOsPrintf("%s: ERR. Invalid winNum%d\n", __FUNCTION__, winNum));
+        return MV_ERROR;
+    }
+
+	if (enable == MV_TRUE) 
+	{
+		/* Get current window */
+	    if (MV_OK != mvXorTargetWinGet(unit,winNum, &addrDecWin))
+		{
+			DB(mvOsPrintf("%s: ERR. targetWinGet fail\n", __FUNCTION__));
+			return MV_ERROR;
+		}
+
+		/* Check for overlapping */
+	    if (MV_TRUE == xorWinOverlapDetect(unit,winNum, &(addrDecWin.addrWin)))
+		{
+			/* Overlap detected	*/
+			DB(mvOsPrintf("%s: ERR. Overlap detected\n", __FUNCTION__));
+			return MV_ERROR;
+		}
+
+		/* No Overlap. Enable address decode target window */
+		for (chan = 0; chan < MV_XOR_MAX_CHAN_PER_UNIT; chan++)
+		{
+		    MV_REG_BIT_SET(XOR_WINDOW_CTRL_REG(unit,chan),
+						   XEXWCR_WIN_EN_MASK(winNum));
+		}
+
+	}
+	else
+	{
+		/* Disable address decode target window */
+
+		for (chan = 0; chan < MV_XOR_MAX_CHAN_PER_UNIT; chan++)
+		{
+		    MV_REG_BIT_RESET(XOR_WINDOW_CTRL_REG(unit,chan),
+							 XEXWCR_WIN_EN_MASK(winNum));
+		}
+
+	}
+
+	return MV_OK;                  
+}
+
+/*******************************************************************************
+* mvXorSetProtWinSet - Configure access attributes of a XOR engine
+*                               to one of the XOR memory windows.
+*
+* DESCRIPTION:
+*       Each engine can be configured with access attributes for each of the
+*       memory spaces. This function sets access attributes 
+*       to a given window for the given engine
+*
+* INPUTS:
+*       chan    - One of the possible engines.
+*       winNum  - One of the possible XOR memory spaces.
+*       access  - Protection access rights.
+*       write   - Write rights.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_BAD_PARAM if parameters to function invalid, MV_OK otherwise.
+*
+*******************************************************************************/
+MV_STATUS mvXorProtWinSet (MV_U32 unit,MV_U32 chan, MV_U32 winNum, MV_BOOL access, 
+                           MV_BOOL write)
+{
+    MV_U32 temp;
+    
+    /* Parameter checking   */
+    if (chan >= MV_XOR_MAX_CHAN_PER_UNIT)
+    {
+		DB(mvOsPrintf("%s: ERR. Invalid chan num %d\n", __FUNCTION__ , chan));
+        return MV_BAD_PARAM;
+    }
+    if (winNum >= XOR_MAX_ADDR_DEC_WIN)
+    {
+		DB(mvOsPrintf("%s: ERR. Invalid win num %d\n", __FUNCTION__, winNum));
+        return MV_BAD_PARAM;
+    }
+
+    temp = MV_REG_READ(XOR_WINDOW_CTRL_REG(unit,chan)) & 
+        (~XEXWCR_WIN_ACC_MASK(winNum));
+
+    /* if access is disable */
+    if (!access)
+    {
+        /* disable access */
+        temp |= XEXWCR_WIN_ACC_NO_ACC(winNum);
+    }
+    /* if access is enable */
+    else
+    {
+        /* if write is enable */
+        if (write)
+        {
+            /* enable write */
+            temp |= XEXWCR_WIN_ACC_RW(winNum);
+        }
+        /* if write is disable */
+        else
+        {
+            /* disable write */
+            temp |= XEXWCR_WIN_ACC_RO(winNum);
+        }
+    }
+    MV_REG_WRITE(XOR_WINDOW_CTRL_REG(unit,chan),temp);
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvXorPciRemap - Set XOR remap register for PCI address windows.
+*
+* DESCRIPTION:
+*       only Windows 0-3 can be remapped.
+*
+* INPUT:
+*       winNum      - window number
+*       pAddrDecWin  - pointer to address space window structure
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_BAD_PARAM if parameters to function invalid, MV_OK otherwise.
+*
+*******************************************************************************/
+MV_STATUS mvXorPciRemap(MV_U32 unit,MV_U32 winNum, MV_U32 addrHigh)
+{
+    /* Parameter checking   */
+    if (winNum >= XOR_MAX_REMAP_WIN)
+    {
+		DB(mvOsPrintf("%s: ERR. Invalid win num %d\n", __FUNCTION__, winNum));
+        return MV_BAD_PARAM;
+    }
+
+    MV_REG_WRITE(XOR_HIGH_ADDR_REMAP_REG(unit,winNum), addrHigh);
+    
+	return MV_OK;
+}
+
+/*******************************************************************************
+* xorWinOverlapDetect - Detect XOR address windows overlaping
+*
+* DESCRIPTION:
+*       An unpredicted behaviour is expected in case XOR address decode 
+*       windows overlaps.
+*       This function detects XOR address decode windows overlaping of a 
+*       specified window. The function does not check the window itself for 
+*       overlaping. The function also skipps disabled address decode windows.
+*
+* INPUT:
+*       winNum      - address decode window number.
+*       pAddrDecWin - An address decode window struct.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_TRUE if the given address window overlap current address
+*       decode map, MV_FALSE otherwise, MV_ERROR if reading invalid data 
+*       from registers.
+*
+*******************************************************************************/
+static MV_STATUS xorWinOverlapDetect(MV_U32 unit,MV_U32 winNum, MV_ADDR_WIN *pAddrWin)
+{
+	MV_U32 	        baseAddrEnableReg;
+	MV_U32          winNumIndex,chan;
+	MV_XOR_DEC_WIN  addrDecWin;
+
+	if (pAddrWin == NULL)
+	{
+		DB(mvOsPrintf("%s: ERR. pAddrWin is NULL pointer\n", __FUNCTION__ ));
+		return MV_BAD_PTR;
+	}
+    
+	for (chan = 0; chan < MV_XOR_MAX_CHAN_PER_UNIT; chan++)
+	{
+		/* Read base address enable register. Do not check disabled windows	*/
+	    baseAddrEnableReg = MV_REG_READ(XOR_WINDOW_CTRL_REG(unit,chan));
+
+		for (winNumIndex = 0; winNumIndex < XOR_MAX_ADDR_DEC_WIN; winNumIndex++)
+		{
+			/* Do not check window itself */
+			if (winNumIndex == winNum)
+			{
+				continue;
+			}
+    
+			/* Do not check disabled windows */
+			if ((baseAddrEnableReg & XEXWCR_WIN_EN_MASK(winNumIndex)) == 0)
+			{
+				continue;
+			}
+    
+			/* Get window parameters */
+			if (MV_OK != mvXorTargetWinGet(unit,winNumIndex, &addrDecWin))
+			{
+				DB(mvOsPrintf("%s: ERR. TargetWinGet failed\n", __FUNCTION__ ));
+				return MV_ERROR;
+			}
+            
+			if (MV_TRUE == ctrlWinOverlapTest(pAddrWin, &(addrDecWin.addrWin)))
+			{
+				return MV_TRUE;
+			}
+		}
+	}
+	
+	return MV_FALSE;
+}
+
+static MV_VOID mvXorAddrDecShowUnit(MV_U32 unit)
+{
+	MV_XOR_DEC_WIN win;
+	int            i;
+
+	mvOsOutput( "\n" );
+	mvOsOutput( "XOR %d:\n", unit );
+	mvOsOutput( "----\n" );
+
+	for( i = 0; i < XOR_MAX_ADDR_DEC_WIN; i++ )
+	{
+		memset( &win, 0, sizeof(MV_XOR_DEC_WIN) );
+
+		mvOsOutput( "win%d - ", i );
+
+		if( mvXorTargetWinGet(unit, i, &win ) == MV_OK )
+		{
+			if( win.enable )
+			{
+				mvOsOutput( "%s base %x, ",
+				mvCtrlTargetNameGet(win.target), win.addrWin.baseLow );
+
+				mvSizePrint( win.addrWin.size );
+				
+                mvOsOutput( "\n" );
+			}
+			else
+				mvOsOutput( "disable\n" );
+		}
+	}
+}
+
+/*******************************************************************************
+* mvXorAddrDecShow - Print the XOR address decode map.
+*
+* DESCRIPTION:
+*		This function print the XOR address decode map.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+MV_VOID mvXorAddrDecShow(MV_VOID)
+{
+	int            i;
+
+	for( i = 0; i < MV_XOR_MAX_UNIT; i++ )
+	    mvXorAddrDecShowUnit(i);
+	
+}
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysXor.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysXor.h
new file mode 100644
index 0000000000..73b2d9e6a4
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysXor.h
@@ -0,0 +1,140 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCMVSysXorh
+#define __INCMVSysXorh
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "ctrlEnv/sys/mvCpuIf.h"
+
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "ctrlEnv/mvCtrlEnvAddrDec.h"
+
+#define XOR_MAX_ADDR_DEC_WIN	8	/* Maximum address decode windows		*/
+#define XOR_MAX_REMAP_WIN       4	/* Maximum address arbiter windows		*/
+
+/* XOR Engine Address Decoding Register Map */                  
+#define XOR_WINDOW_CTRL_REG(unit,chan)     (XOR_UNIT_BASE(unit)+(0x240 + ((chan) * 4)))
+#define XOR_BASE_ADDR_REG(unit,winNum)     (XOR_UNIT_BASE(unit)+(0x250 + ((winNum) * 4)))
+#define XOR_SIZE_MASK_REG(unit,winNum)     (XOR_UNIT_BASE(unit)+(0x270 + ((winNum) * 4)))
+#define XOR_HIGH_ADDR_REMAP_REG(unit,winNum) (XOR_UNIT_BASE(unit)+(0x290 + ((winNum) * 4)))
+
+/* XOR Engine [0..1] Window Control Registers (XExWCR) */
+#define XEXWCR_WIN_EN_OFFS(winNum)          (winNum)
+#define XEXWCR_WIN_EN_MASK(winNum)          (1 << (XEXWCR_WIN_EN_OFFS(winNum)))
+#define XEXWCR_WIN_EN_ENABLE(winNum)        (1 << (XEXWCR_WIN_EN_OFFS(winNum)))
+#define XEXWCR_WIN_EN_DISABLE(winNum)       (0 << (XEXWCR_WIN_EN_OFFS(winNum)))
+
+#define XEXWCR_WIN_ACC_OFFS(winNum)         ((2 * winNum) + 16)
+#define XEXWCR_WIN_ACC_MASK(winNum)         (3 << (XEXWCR_WIN_ACC_OFFS(winNum)))
+#define XEXWCR_WIN_ACC_NO_ACC(winNum)       (0 << (XEXWCR_WIN_ACC_OFFS(winNum)))
+#define XEXWCR_WIN_ACC_RO(winNum)           (1 << (XEXWCR_WIN_ACC_OFFS(winNum)))
+#define XEXWCR_WIN_ACC_RW(winNum)           (3 << (XEXWCR_WIN_ACC_OFFS(winNum)))
+
+/* XOR Engine Base Address Registers (XEBARx) */
+#define XEBARX_TARGET_OFFS                  (0)
+#define XEBARX_TARGET_MASK                  (0xF << XEBARX_TARGET_OFFS)
+#define XEBARX_ATTR_OFFS                    (8)
+#define XEBARX_ATTR_MASK                    (0xFF << XEBARX_ATTR_OFFS)
+#define XEBARX_BASE_OFFS                    (16)
+#define XEBARX_BASE_MASK                    (0xFFFF << XEBARX_BASE_OFFS)
+
+/* XOR Engine Size Mask Registers (XESMRx) */
+#define XESMRX_SIZE_MASK_OFFS               (16)
+#define XESMRX_SIZE_MASK_MASK               (0xFFFF << XESMRX_SIZE_MASK_OFFS)
+
+/* XOR Engine High Address Remap Register (XEHARRx1) */
+#define XEHARRX_REMAP_OFFS                  (0)
+#define XEHARRX_REMAP_MASK                  (0xFFFFFFFF << XEHARRX_REMAP_OFFS)
+
+typedef struct _mvXorDecWin
+{
+    MV_TARGET     target;
+    MV_ADDR_WIN   addrWin; /* An address window*/
+    MV_BOOL       enable;  /* Address decode window is enabled/disabled */
+ 
+}MV_XOR_DEC_WIN;
+
+MV_STATUS   mvXorInit (MV_VOID);
+MV_STATUS   mvXorTargetWinSet(MV_U32 unit, MV_U32 winNum,
+			      MV_XOR_DEC_WIN *pAddrDecWin);
+MV_STATUS   mvXorTargetWinGet(MV_U32 unit, MV_U32 winNum,
+			      MV_XOR_DEC_WIN *pAddrDecWin);
+MV_STATUS   mvXorTargetWinEnable(MV_U32 unit, 
+			      MV_U32 winNum, MV_BOOL enable);
+MV_STATUS   mvXorProtWinSet (MV_U32 unit,MV_U32 chan, MV_U32 winNum, MV_BOOL access, 
+                             MV_BOOL write);
+MV_STATUS   mvXorPciRemap(MV_U32 unit, MV_U32 winNum, MV_U32 addrHigh);
+
+MV_VOID     mvXorAddrDecShow(MV_VOID);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/device/mvDevice.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/device/mvDevice.c
new file mode 100644
index 0000000000..80325fc12d
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/device/mvDevice.c
@@ -0,0 +1,75 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "device/mvDevice.h"
+
+/* defines  */       
+#ifdef MV_DEBUG         
+	#define DB(x)	x
+#else                
+	#define DB(x)    
+#endif	             
+
+
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/device/mvDevice.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/device/mvDevice.h
new file mode 100644
index 0000000000..9350779668
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/device/mvDevice.h
@@ -0,0 +1,74 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvDeviceH
+#define __INCmvDeviceH
+
+#include "mvCommon.h"
+#include "mvOs.h"
+#include "ctrlEnv/mvCtrlEnvSpec.h"
+#include "device/mvDeviceRegs.h"
+
+
+#endif /* #ifndef __INCmvDeviceH */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/device/mvDeviceRegs.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/device/mvDeviceRegs.h
new file mode 100644
index 0000000000..80778ad935
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/kw_family/device/mvDeviceRegs.h
@@ -0,0 +1,101 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvDeviceRegsH
+#define __INCmvDeviceRegsH
+
+#ifndef MV_ASMLANGUAGE
+#include "ctrlEnv/mvCtrlEnvLib.h"
+/* This enumerator describes the Marvell controller possible devices that   */
+/* can be connected to its device interface.                                */
+typedef enum _mvDevice
+{
+#if defined(MV_INCLUDE_DEVICE_CS0)
+	DEV_CS0 = 0,    /* Device connected to dev CS[0]    */
+#endif
+#if defined(MV_INCLUDE_DEVICE_CS1)
+	DEV_CS1 = 1,        /* Device connected to dev CS[1]    */
+#endif
+#if defined(MV_INCLUDE_DEVICE_CS2)
+	DEV_CS2 = 2,        /* Device connected to dev CS[2]    */
+#endif
+#if defined(MV_INCLUDE_DEVICE_CS3)
+	DEV_CS3 = 3,        /* Device connected to dev CS[2]    */
+#endif
+#if defined(MV_INCLUDE_DEVICE_CS4)
+	DEV_CS4 = 4,        /* Device connected to BOOT dev    */
+#endif
+	MV_DEV_MAX_CS = MV_DEVICE_MAX_CS
+}MV_DEVICE;
+
+ 
+#endif /* MV_ASMLANGUAGE */
+
+
+#define NAND_CTRL_REG		0x10470
+
+#define NAND_ACTCEBOOT_BIT	BIT1
+
+
+#endif /* #ifndef __INCmvDeviceRegsH */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/linux_oss/mvOs.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/linux_oss/mvOs.c
new file mode 100644
index 0000000000..75f7e88cf6
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/linux_oss/mvOs.c
@@ -0,0 +1,211 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+*******************************************************************************/
+/*******************************************************************************
+* mvOsCpuArchLib.c - Marvell CPU architecture library
+*
+* DESCRIPTION:
+*       This library introduce Marvell API for OS dependent CPU architecture 
+*       APIs. This library introduce single CPU architecture services APKI 
+*       cross OS.
+*
+* DEPENDENCIES:
+*       None.
+*
+*******************************************************************************/
+
+/* includes */
+#include <asm/processor.h>
+#include "mvOs.h"
+
+static MV_U32 read_p15_c0 (void);
+
+/* defines  */
+#define ARM_ID_REVISION_OFFS	0
+#define ARM_ID_REVISION_MASK	(0xf << ARM_ID_REVISION_OFFS)
+
+#define ARM_ID_PART_NUM_OFFS	4
+#define ARM_ID_PART_NUM_MASK	(0xfff << ARM_ID_PART_NUM_OFFS)
+
+#define ARM_ID_ARCH_OFFS	16
+#define ARM_ID_ARCH_MASK	(0xf << ARM_ID_ARCH_OFFS)
+
+#define ARM_ID_VAR_OFFS		20
+#define ARM_ID_VAR_MASK		(0xf << ARM_ID_VAR_OFFS)
+
+#define ARM_ID_ASCII_OFFS	24
+#define ARM_ID_ASCII_MASK	(0xff << ARM_ID_ASCII_OFFS)
+
+
+
+void* mvOsIoCachedMalloc( void* osHandle, MV_U32 size, MV_ULONG* pPhyAddr,
+			  MV_U32 *memHandle)
+{
+    void *p = kmalloc( size, GFP_KERNEL );
+    *pPhyAddr = pci_map_single( osHandle, p, 0, PCI_DMA_BIDIRECTIONAL );
+    return p;
+}
+void* mvOsIoUncachedMalloc( void* osHandle, MV_U32 size, MV_ULONG* pPhyAddr,
+			    MV_U32 *memHandle)
+{
+    return pci_alloc_consistent( osHandle, size, (dma_addr_t *)pPhyAddr );
+}
+ 
+void mvOsIoUncachedFree( void* osHandle, MV_U32 size, MV_ULONG phyAddr, void* pVirtAddr,
+			 MV_U32 memHandle)
+{
+    return pci_free_consistent( osHandle, size, pVirtAddr, (dma_addr_t)phyAddr );
+} 
+                                                                                                                                               
+void mvOsIoCachedFree( void* osHandle, MV_U32 size, MV_ULONG phyAddr, void* pVirtAddr,
+		       MV_U32 memHandle )
+{
+    return kfree( pVirtAddr );
+}
+ 
+int mvOsRand(void)
+{
+    int rand;
+    get_random_bytes(&rand, sizeof(rand) );
+    return rand;
+}
+
+/*******************************************************************************
+* mvOsCpuVerGet() - 
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       32bit CPU Revision
+*
+*******************************************************************************/
+MV_U32 mvOsCpuRevGet( MV_VOID )
+{
+	return ((read_p15_c0() & ARM_ID_REVISION_MASK ) >> ARM_ID_REVISION_OFFS);
+}
+/*******************************************************************************
+* mvOsCpuPartGet() - 
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       32bit CPU Part number
+*
+*******************************************************************************/
+MV_U32 mvOsCpuPartGet( MV_VOID )
+{
+	return ((read_p15_c0() & ARM_ID_PART_NUM_MASK ) >> ARM_ID_PART_NUM_OFFS);
+}
+/*******************************************************************************
+* mvOsCpuArchGet() - 
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       32bit CPU Architicture number
+*
+*******************************************************************************/
+MV_U32 mvOsCpuArchGet( MV_VOID )
+{
+    return ((read_p15_c0() & ARM_ID_ARCH_MASK ) >> ARM_ID_ARCH_OFFS);
+}
+/*******************************************************************************
+* mvOsCpuVarGet() - 
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       32bit CPU Variant number
+*
+*******************************************************************************/
+MV_U32 mvOsCpuVarGet( MV_VOID )
+{
+    return ((read_p15_c0() & ARM_ID_VAR_MASK ) >> ARM_ID_VAR_OFFS);
+}
+/*******************************************************************************
+* mvOsCpuAsciiGet() - 
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       32bit CPU Variant number
+*
+*******************************************************************************/
+MV_U32 mvOsCpuAsciiGet( MV_VOID )
+{
+    return ((read_p15_c0() & ARM_ID_ASCII_MASK ) >> ARM_ID_ASCII_OFFS);
+}
+
+
+
+/*
+static unsigned long read_p15_c0 (void)
+*/
+/* read co-processor 15, register #0 (ID register) */
+static MV_U32 read_p15_c0 (void)
+{
+	MV_U32 value;
+
+	__asm__ __volatile__(
+		"mrc	p15, 0, %0, c0, c0, 0   @ read control reg\n"
+		: "=r" (value)
+		:
+		: "memory");
+
+	return value;
+}
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/linux_oss/mvOs.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/linux_oss/mvOs.h
new file mode 100644
index 0000000000..8da562a405
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/linux_oss/mvOs.h
@@ -0,0 +1,423 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+*******************************************************************************/
+#ifndef _MV_OS_LNX_H_
+#define _MV_OS_LNX_H_
+                                                                                                                                               
+                                                                                                                                               
+#ifdef __KERNEL__
+/* for kernel space */
+#include <linux/autoconf.h>
+#include <linux/interrupt.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/blkdev.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+  
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/hardirq.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+ 
+#include <linux/random.h>
+
+#include "dbg-trace.h"
+
+extern void mv_early_printk(char *fmt,...);
+
+#define MV_ASM              __asm__ __volatile__  
+#define INLINE              inline
+#define MV_TRC_REC	        TRC_REC
+#define mvOsPrintf          printk
+#define mvOsEarlyPrintf	    mv_early_printk
+#define mvOsOutput          printk
+#define mvOsSPrintf         sprintf
+#define mvOsMalloc(_size_)  kmalloc(_size_,GFP_ATOMIC)
+#define mvOsFree            kfree
+#define mvOsMemcpy          memcpy
+#define mvOsSleep(_mils_)   mdelay(_mils_)
+#define mvOsTaskLock()
+#define mvOsTaskUnlock()
+#define strtol              simple_strtoul
+#define mvOsDelay(x)        mdelay(x)
+#define mvOsUDelay(x)       udelay(x)
+#define mvCopyFromOs        copy_from_user
+#define mvCopyToOs          copy_to_user
+
+ 
+#include "mvTypes.h"
+#include "mvCommon.h"
+  
+#ifdef MV_NDEBUG
+#define mvOsAssert(cond)
+#else
+#define mvOsAssert(cond) { do { if(!(cond)) { BUG(); } }while(0); }
+#endif /* MV_NDEBUG */
+ 
+#else /* __KERNEL__ */
+ 
+/* for user space applications */
+#include <stdlib.h>
+#include <stdio.h>
+#include <assert.h>
+#include <string.h>
+ 
+#define INLINE inline
+#define mvOsPrintf printf
+#define mvOsOutput printf
+#define mvOsMalloc(_size_) malloc(_size_)
+#define mvOsFree free
+#define mvOsAssert(cond) assert(cond)
+ 
+#endif /* __KERNEL__ */                                                                                                                                               
+#define mvOsIoVirtToPhy(pDev, pVirtAddr)                            \
+    pci_map_single( (pDev), (pVirtAddr), 0, PCI_DMA_BIDIRECTIONAL )
+
+#define mvOsCacheClear(pDev, p, size )                              \
+    pci_map_single( (pDev), (p), (size), PCI_DMA_BIDIRECTIONAL)
+ 
+#define mvOsCacheFlush(pDev, p, size )                              \
+    pci_map_single( (pDev), (p), (size), PCI_DMA_TODEVICE)
+ 
+#define mvOsCacheInvalidate(pDev, p, size)                          \
+    pci_map_single( (pDev), (p), (size), PCI_DMA_FROMDEVICE )
+
+#define mvOsCacheUnmap(pDev, phys, size)                          \
+    pci_unmap_single( (pDev), (dma_addr_t)(phys), (size), PCI_DMA_FROMDEVICE )
+
+
+#define CPU_PHY_MEM(x)              (MV_U32)x
+#define CPU_MEMIO_CACHED_ADDR(x)    (void*)x
+#define CPU_MEMIO_UNCACHED_ADDR(x)  (void*)x
+
+
+/* CPU architecture dependent 32, 16, 8 bit read/write IO addresses */
+#define MV_MEMIO32_WRITE(addr, data)    \
+    ((*((volatile unsigned int*)(addr))) = ((unsigned int)(data)))
+
+#define MV_MEMIO32_READ(addr)           \
+    ((*((volatile unsigned int*)(addr))))
+
+#define MV_MEMIO16_WRITE(addr, data)    \
+    ((*((volatile unsigned short*)(addr))) = ((unsigned short)(data)))
+
+#define MV_MEMIO16_READ(addr)           \
+    ((*((volatile unsigned short*)(addr))))
+
+#define MV_MEMIO8_WRITE(addr, data)     \
+    ((*((volatile unsigned char*)(addr))) = ((unsigned char)(data)))
+
+#define MV_MEMIO8_READ(addr)            \
+    ((*((volatile unsigned char*)(addr))))
+
+
+/* No Fast Swap implementation (in assembler) for ARM */
+#define MV_32BIT_LE_FAST(val)            MV_32BIT_LE(val)
+#define MV_16BIT_LE_FAST(val)            MV_16BIT_LE(val)
+#define MV_32BIT_BE_FAST(val)            MV_32BIT_BE(val)
+#define MV_16BIT_BE_FAST(val)            MV_16BIT_BE(val)
+    
+/* 32 and 16 bit read/write in big/little endian mode */
+
+/* 16bit write in little endian mode */
+#define MV_MEMIO_LE16_WRITE(addr, data) \
+        MV_MEMIO16_WRITE(addr, MV_16BIT_LE_FAST(data))
+
+/* 16bit read in little endian mode */
+static __inline MV_U16 MV_MEMIO_LE16_READ(MV_U32 addr)
+{
+    MV_U16 data;
+
+    data= (MV_U16)MV_MEMIO16_READ(addr);
+
+    return (MV_U16)MV_16BIT_LE_FAST(data);
+}
+
+/* 32bit write in little endian mode */
+#define MV_MEMIO_LE32_WRITE(addr, data) \
+        MV_MEMIO32_WRITE(addr, MV_32BIT_LE_FAST(data))
+
+/* 32bit read in little endian mode */
+static __inline MV_U32 MV_MEMIO_LE32_READ(MV_U32 addr)
+{
+    MV_U32 data;
+
+    data= (MV_U32)MV_MEMIO32_READ(addr);
+
+    return (MV_U32)MV_32BIT_LE_FAST(data);
+}
+
+static __inline void mvOsBCopy(char* srcAddr, char* dstAddr, int byteCount)
+{
+    while(byteCount != 0)
+    {
+        *dstAddr = *srcAddr;
+        dstAddr++;
+        srcAddr++;
+        byteCount--;
+    }
+}
+
+static INLINE MV_U64 mvOsDivMod64(MV_U64 divided, MV_U64 divisor, MV_U64* modulu)
+{
+    MV_U64  division = 0;
+
+    if(divisor == 1)
+	return divided;
+
+    while(divided >= divisor)
+    {
+	    division++;
+	    divided -= divisor;
+    }
+    if (modulu != NULL)
+        *modulu = divided;
+
+    return division;
+}
+
+#if defined(MV_BRIDGE_SYNC_REORDER)
+extern MV_U32 *mvUncachedParam;
+
+static __inline void mvOsBridgeReorderWA(void)
+{
+	volatile MV_U32 val = 0;
+
+	val = mvUncachedParam[0];
+}
+#endif
+
+
+/* Flash APIs */
+#define MV_FL_8_READ            MV_MEMIO8_READ
+#define MV_FL_16_READ           MV_MEMIO_LE16_READ
+#define MV_FL_32_READ           MV_MEMIO_LE32_READ
+#define MV_FL_8_DATA_READ       MV_MEMIO8_READ
+#define MV_FL_16_DATA_READ      MV_MEMIO16_READ
+#define MV_FL_32_DATA_READ      MV_MEMIO32_READ
+#define MV_FL_8_WRITE           MV_MEMIO8_WRITE
+#define MV_FL_16_WRITE          MV_MEMIO_LE16_WRITE
+#define MV_FL_32_WRITE          MV_MEMIO_LE32_WRITE
+#define MV_FL_8_DATA_WRITE      MV_MEMIO8_WRITE
+#define MV_FL_16_DATA_WRITE     MV_MEMIO16_WRITE
+#define MV_FL_32_DATA_WRITE     MV_MEMIO32_WRITE
+
+
+/* CPU cache information */
+#define CPU_I_CACHE_LINE_SIZE   32    /* 2do: replace 32 with linux core macro */
+#define CPU_D_CACHE_LINE_SIZE   32    /* 2do: replace 32 with linux core macro */
+
+#ifdef CONFIG_L2_CACHE_ENABLE
+/* Data cache flush one line */
+#define mvOsCacheLineFlushInv(handle, addr)                     \
+{                                                               \
+  __asm__ __volatile__ ("mcr p15, 0, %0, c7, c14, 1" : : "r" (addr));\
+  __asm__ __volatile__ ("mcr p15, 1, %0, c15, c10, 1" : : "r" (addr));\
+  __asm__ __volatile__ ("mcr p15, 0, r0, c7, c10, 4");		\
+}
+
+#else
+
+/* Data cache flush one line */
+#define mvOsCacheLineFlushInv(handle, addr)                     \
+{                                                               \
+  __asm__ __volatile__ ("mcr p15, 0, %0, c7, c14, 1" : : "r" (addr));\
+  __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" : : "r" (addr)); \
+}
+#endif
+ 
+#ifdef CONFIG_L2_CACHE_ENABLE
+#define mvOsCacheLineInv(handle,addr)                           \
+{                                                               \
+  __asm__ __volatile__ ("mcr p15, 0, %0, c7, c6, 1" : : "r" (addr)); \
+ __asm__ __volatile__ ("mcr p15, 1, %0, c15, c11, 1" : : "r" (addr)); \
+}
+#else
+#define mvOsCacheLineInv(handle,addr)                           \
+{                                                               \
+  __asm__ __volatile__ ("mcr p15, 0, %0, c7, c6, 1" : : "r" (addr)); \
+}
+#endif
+
+#ifdef CONFIG_L2_CACHE_ENABLE
+/* Data cache flush one line */
+#define mvOsCacheLineFlush(handle, addr)                     \
+{                                                               \
+  __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 1" : : "r" (addr));\
+  __asm__ __volatile__ ("mcr p15, 1, %0, c15, c9, 1" : : "r" (addr));\
+  __asm__ __volatile__ ("mcr p15, 0, r0, c7, c10, 4");          \
+}
+
+#else
+/* Data cache flush one line */
+#define mvOsCacheLineFlush(handle, addr)                     \
+{                                                               \
+  __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 1" : : "r" (addr));\
+  __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" : : "r" (addr)); \
+}
+#endif 
+
+static __inline void mvOsPrefetch(const void *ptr)
+{
+#ifdef CONFIG_USE_DSP
+        __asm__ __volatile__(
+                "pld\t%0"
+                :
+                : "o" (*(char *)ptr)
+                : "cc");
+#else
+	return;
+#endif
+}
+
+
+/* Flush CPU pipe */
+#define CPU_PIPE_FLUSH
+
+
+
+
+
+/* register manipulations  */
+
+/******************************************************************************
+* This debug function enable the write of each register that u-boot access to 
+* to an array in the DRAM, the function record only MV_REG_WRITE access.
+* The function could not be operate when booting from flash.
+* In order to print the array we use the printreg command.
+******************************************************************************/
+/* #define REG_DEBUG */
+#if defined(REG_DEBUG)
+extern int reg_arry[2048][2];
+extern int reg_arry_index;
+#endif
+
+/* Marvell controller register read/write macros */
+#define MV_REG_VALUE(offset)          \
+                (MV_MEMIO32_READ((INTER_REGS_BASE | (offset))))
+
+#define MV_REG_READ(offset)             \
+        (MV_MEMIO_LE32_READ(INTER_REGS_BASE | (offset)))
+
+#if defined(REG_DEBUG)
+#define MV_REG_WRITE(offset, val)    \
+        MV_MEMIO_LE32_WRITE((INTER_REGS_BASE | (offset)), (val)); \
+        { \
+                reg_arry[reg_arry_index][0] = (INTER_REGS_BASE | (offset));\
+                reg_arry[reg_arry_index][1] = (val);\
+                reg_arry_index++;\
+        }
+#else
+#define MV_REG_WRITE(offset, val)    \
+        MV_MEMIO_LE32_WRITE((INTER_REGS_BASE | (offset)), (val));
+#endif
+                                                
+#define MV_REG_BYTE_READ(offset)        \
+        (MV_MEMIO8_READ((INTER_REGS_BASE | (offset))))
+
+#if defined(REG_DEBUG)
+#define MV_REG_BYTE_WRITE(offset, val)  \
+        MV_MEMIO8_WRITE((INTER_REGS_BASE | (offset)), (val)); \
+        { \
+                reg_arry[reg_arry_index][0] = (INTER_REGS_BASE | (offset));\
+                reg_arry[reg_arry_index][1] = (val);\
+                reg_arry_index++;\
+        }
+#else
+#define MV_REG_BYTE_WRITE(offset, val)  \
+        MV_MEMIO8_WRITE((INTER_REGS_BASE | (offset)), (val))
+#endif
+
+#if defined(REG_DEBUG)
+#define MV_REG_BIT_SET(offset, bitMask)                 \
+        (MV_MEMIO32_WRITE((INTER_REGS_BASE | (offset)), \
+         (MV_MEMIO32_READ(INTER_REGS_BASE | (offset)) | \
+          MV_32BIT_LE_FAST(bitMask)))); \
+        { \
+                reg_arry[reg_arry_index][0] = (INTER_REGS_BASE | (offset));\
+                reg_arry[reg_arry_index][1] = (MV_MEMIO32_READ(INTER_REGS_BASE | (offset)));\
+                reg_arry_index++;\
+        }
+#else
+#define MV_REG_BIT_SET(offset, bitMask)                 \
+        (MV_MEMIO32_WRITE((INTER_REGS_BASE | (offset)), \
+         (MV_MEMIO32_READ(INTER_REGS_BASE | (offset)) | \
+          MV_32BIT_LE_FAST(bitMask))))
+#endif
+        
+#if defined(REG_DEBUG)
+#define MV_REG_BIT_RESET(offset,bitMask)                \
+        (MV_MEMIO32_WRITE((INTER_REGS_BASE | (offset)), \
+         (MV_MEMIO32_READ(INTER_REGS_BASE | (offset)) & \
+          MV_32BIT_LE_FAST(~bitMask)))); \
+        { \
+                reg_arry[reg_arry_index][0] = (INTER_REGS_BASE | (offset));\
+                reg_arry[reg_arry_index][1] = (MV_MEMIO32_READ(INTER_REGS_BASE | (offset)));\
+                reg_arry_index++;\
+        }
+#else
+#define MV_REG_BIT_RESET(offset,bitMask)                \
+        (MV_MEMIO32_WRITE((INTER_REGS_BASE | (offset)), \
+         (MV_MEMIO32_READ(INTER_REGS_BASE | (offset)) & \
+          MV_32BIT_LE_FAST(~bitMask))))
+#endif
+
+
+
+/* ARM architecture APIs */
+MV_U32  mvOsCpuRevGet (MV_VOID);
+MV_U32  mvOsCpuPartGet (MV_VOID);
+MV_U32  mvOsCpuArchGet (MV_VOID);
+MV_U32  mvOsCpuVarGet (MV_VOID);
+MV_U32  mvOsCpuAsciiGet (MV_VOID);
+
+/*  Other APIs  */
+void* mvOsIoCachedMalloc( void* osHandle, MV_U32 size, MV_ULONG* pPhyAddr, MV_U32 *memHandle);
+void* mvOsIoUncachedMalloc( void* osHandle, MV_U32 size, MV_ULONG* pPhyAddr, MV_U32 *memHandle );
+void mvOsIoUncachedFree( void* osHandle, MV_U32 size, MV_ULONG phyAddr, void* pVirtAddr, MV_U32 memHandle );
+void mvOsIoCachedFree( void* osHandle, MV_U32 size, MV_ULONG phyAddr, void* pVirtAddr, MV_U32 memHandle );
+int mvOsRand(void);
+
+#endif /* _MV_OS_LNX_H_ */
+
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/linux_oss/mvOsSata.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/linux_oss/mvOsSata.h
new file mode 100644
index 0000000000..c925a9e9a0
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/linux_oss/mvOsSata.h
@@ -0,0 +1,158 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+*******************************************************************************/
+/*******************************************************************************
+* mvOsLinux.h - O.S. interface header file for Linux  
+*
+* DESCRIPTION:
+*       This header file contains OS dependent definition under Linux
+*
+* DEPENDENCIES:
+*       Linux kernel header files.
+*
+* FILE REVISION NUMBER:
+*       $Revision: 1.1 $
+*******************************************************************************/
+
+#ifndef __INCmvOsLinuxh
+#define __INCmvOsLinuxh
+
+/* Includes */
+#include <linux/autoconf.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/major.h>
+#include <linux/errno.h>
+#include <linux/genhd.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+#include <linux/pci.h>
+
+#include <asm/byteorder.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include "mvOs.h"
+
+
+/* Definitions */
+#define MV_DEFAULT_QUEUE_DEPTH 2
+#define MV_SATA_SUPPORT_EDMA_SINGLE_DATA_REGION
+#define MV_SATA_SUPPORT_GEN2E_128_QUEUE_LEN
+
+#ifdef CONFIG_MV88F6082
+ #define MV_SATA_OVERRIDE_SW_QUEUE_SIZE
+ #define MV_SATA_REQUESTED_SW_QUEUE_SIZE 2
+ #undef MV_SATA_SUPPORT_GEN2E_128_QUEUE_LEN
+#endif
+
+/* System dependent macro for flushing CPU write cache */
+#if defined (MV_BRIDGE_SYNC_REORDER)
+#define MV_CPU_WRITE_BUFFER_FLUSH()	do {	\
+						wmb();	\
+						mvOsBridgeReorderWA();	\
+					} while (0)
+#else
+#define MV_CPU_WRITE_BUFFER_FLUSH()     wmb()
+#endif /* CONFIG_MV78XX0 */
+
+/* System dependent little endian from / to CPU conversions */
+#define MV_CPU_TO_LE16(x)   cpu_to_le16(x)
+#define MV_CPU_TO_LE32(x)   cpu_to_le32(x)
+
+#define MV_LE16_TO_CPU(x)   le16_to_cpu(x)
+#define MV_LE32_TO_CPU(x)   le32_to_cpu(x)
+
+#ifdef __BIG_ENDIAN_BITFIELD
+#define MV_BIG_ENDIAN_BITFIELD
+#endif
+
+/* System dependent register read / write in byte/word/dword variants */
+#define MV_REG_WRITE_BYTE(base, offset, val)    writeb(val, base + offset)
+#define MV_REG_WRITE_WORD(base, offset, val)    writew(val, base + offset)
+#define MV_REG_WRITE_DWORD(base, offset, val)   writel(val, base + offset)
+#define MV_REG_READ_BYTE(base, offset)          readb(base + offset)
+#define MV_REG_READ_WORD(base, offset)          readw(base + offset)
+#define MV_REG_READ_DWORD(base, offset)         readl(base + offset)
+
+
+/* Typedefs    */
+
+/* System dependant typedefs */
+typedef void            *MV_VOID_PTR;
+typedef u32             *MV_U32_PTR;
+typedef u16             *MV_U16_PTR;
+typedef u8              *MV_U8_PTR;
+typedef char            *MV_CHAR_PTR;
+typedef void            *MV_BUS_ADDR_T;
+typedef unsigned long   MV_CPU_FLAGS;
+
+
+/* Structures  */
+/* System dependent structure */
+typedef struct mvOsSemaphore
+{
+  int notUsed;
+} MV_OS_SEMAPHORE;
+
+
+/* Functions (User implemented)*/
+
+/* Semaphore init, take and release */
+#define mvOsSemInit(x) MV_TRUE
+#define mvOsSemTake(x)
+#define mvOsSemRelease(x)
+
+/* Interrupt masking and unmasking functions */
+MV_CPU_FLAGS mvOsSaveFlagsAndMaskCPUInterrupts(MV_VOID);
+MV_VOID      mvOsRestoreFlags(MV_CPU_FLAGS);
+
+/* Delay function in micro seconds resolution */
+void mvMicroSecondsDelay(MV_VOID_PTR, MV_U32);
+
+/* Typedefs    */
+typedef enum mvBoolean
+{
+    MV_SFALSE, MV_STRUE
+} MV_BOOLEAN;
+
+/* System logging function */
+#include "mvLog.h"
+/* Enable READ/WRITE Long SCSI command only when driver is compiled for debugging */
+#ifdef MV_LOGGER
+#define MV_SATA_SUPPORT_READ_WRITE_LONG
+#endif
+
+#define MV_IAL_LOG_ID       3
+
+#endif /* __INCmvOsLinuxh */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mvSysHwConfig.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mvSysHwConfig.h
new file mode 100644
index 0000000000..d761060c94
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mvSysHwConfig.h
@@ -0,0 +1,375 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+
+*******************************************************************************/
+/*******************************************************************************
+* mvSysHwCfg.h - Marvell system HW configuration file
+*
+* DESCRIPTION:
+*       None.
+*
+* DEPENDENCIES:
+*       None.
+*
+*******************************************************************************/
+
+#ifndef __INCmvSysHwConfigh
+#define __INCmvSysHwConfigh
+
+#include "../../../../include/linux/autoconf.h"
+
+#define CONFIG_MARVELL	1
+
+/* includes */
+#define _1K         0x00000400
+#define _4K         0x00001000
+#define _8K         0x00002000
+#define _16K        0x00004000
+#define _32K        0x00008000
+#define _64K        0x00010000
+#define _128K       0x00020000
+#define _256K       0x00040000
+#define _512K       0x00080000
+
+#define _1M         0x00100000
+#define _2M         0x00200000
+#define _4M         0x00400000
+#define _8M         0x00800000
+#define _16M        0x01000000
+#define _32M        0x02000000
+#define _64M        0x04000000
+#define _128M       0x08000000
+#define _256M       0x10000000
+#define _512M       0x20000000
+
+#define _1G         0x40000000
+#define _2G         0x80000000
+
+/****************************************/
+/* Soc supporeted Units definitions	*/
+/****************************************/
+
+#ifdef CONFIG_MV_INCLUDE_PEX
+#define MV_INCLUDE_PEX
+#endif
+#ifdef CONFIG_MV_INCLUDE_TWSI
+#define MV_INCLUDE_TWSI
+#endif
+#ifdef CONFIG_MV_INCLUDE_CESA
+#define MV_INCLUDE_CESA
+#endif
+#ifdef CONFIG_MV_INCLUDE_GIG_ETH
+#define MV_INCLUDE_GIG_ETH
+#endif
+#ifdef CONFIG_MV_INCLUDE_INTEG_SATA
+#define MV_INCLUDE_INTEG_SATA
+#define MV_INCLUDE_SATA
+#endif
+#ifdef CONFIG_MV_INCLUDE_USB
+#define MV_INCLUDE_USB
+#define MV_USB_VOLTAGE_FIX
+#endif
+#ifdef CONFIG_MV_INCLUDE_NAND
+#define MV_INCLUDE_NAND
+#endif
+#ifdef CONFIG_MV_INCLUDE_TDM
+#define MV_INCLUDE_TDM
+#endif
+#ifdef CONFIG_MV_INCLUDE_XOR
+#define MV_INCLUDE_XOR
+#endif
+#ifdef CONFIG_MV_INCLUDE_TWSI
+#define MV_INCLUDE_TWSI
+#endif
+#ifdef CONFIG_MV_INCLUDE_UART
+#define MV_INCLUDE_UART
+#endif
+#ifdef CONFIG_MV_INCLUDE_SPI
+#define MV_INCLUDE_SPI
+#endif
+#ifdef CONFIG_MV_INCLUDE_SFLASH_MTD
+#define MV_INCLUDE_SFLASH_MTD
+#endif
+#ifdef CONFIG_MV_INCLUDE_AUDIO
+#define MV_INCLUDE_AUDIO
+#endif
+#ifdef CONFIG_MV_INCLUDE_TS
+#define MV_INCLUDE_TS
+#endif
+#ifdef CONFIG_MV_INCLUDE_SDIO
+#define MV_INCLUDE_SDIO
+#endif
+
+
+/* NAND flash stuff */
+#ifdef CONFIG_MV_NAND_BOOT
+#define MV_NAND_BOOT
+#endif
+#ifdef CONFIG_MV_NAND
+#define MV_NAND
+#endif
+
+/* SPI flash stuff */
+#ifdef CONFIG_MV_SPI_BOOT
+#define MV_SPI_BOOT
+#endif
+
+
+/****************************************************************/
+/************* General    configuration ********************/
+/****************************************************************/
+
+/* Enable Clock Power Control */
+#define MV_INCLUDE_CLK_PWR_CNTRL
+
+/* Disable the DEVICE BAR in the PEX */
+#define MV_DISABLE_PEX_DEVICE_BAR
+
+/* Allow the usage of early printings during initialization */
+#define MV_INCLUDE_EARLY_PRINTK
+
+/****************************************************************/
+/************* NFP configuration ********************************/
+/****************************************************************/
+#define MV_NFP_SEC_Q_SIZE		64
+#define MV_NFP_SEC_REQ_Q_SIZE		1000
+
+
+
+/****************************************************************/
+/************* CESA configuration ********************/
+/****************************************************************/
+
+#ifdef MV_INCLUDE_CESA
+
+#define MV_CESA_MAX_CHAN               4
+
+/* Use 2K of SRAM */
+#define MV_CESA_MAX_BUF_SIZE           1600
+
+#endif /* MV_INCLUDE_CESA */
+
+#if defined(CONFIG_MV_INCLUDE_GIG_ETH)
+
+#ifdef CONFIG_MV_NFP_STATS
+#define MV_FP_STATISTICS
+#else
+#undef MV_FP_STATISTICS
+#endif
+/* Default configuration for SKB_REUSE: 0 - Disabled, 1 - Enabled */
+#define MV_ETH_SKB_REUSE_DEFAULT    1
+/* Default configuration for TX_EN workaround: 0 - Disabled, 1 - Enabled */
+#define MV_ETH_TX_EN_DEFAULT        0
+
+/* un-comment if you want to perform tx_done from within the poll function */
+/* #define ETH_TX_DONE_ISR */
+
+/* put descriptors in uncached memory */
+/* #define ETH_DESCR_UNCACHED */
+
+/* Descriptors location: DRAM/internal-SRAM */
+#define ETH_DESCR_IN_SDRAM
+#undef  ETH_DESCR_IN_SRAM    /* No integrated SRAM in 88Fxx81 devices */
+
+#if defined(ETH_DESCR_IN_SRAM)
+#if defined(ETH_DESCR_UNCACHED)
+ #define ETH_DESCR_CONFIG_STR    "Uncached descriptors in integrated SRAM"
+#else
+ #define ETH_DESCR_CONFIG_STR    "Cached descriptors in integrated SRAM"
+#endif
+#elif defined(ETH_DESCR_IN_SDRAM)
+#if defined(ETH_DESCR_UNCACHED)
+ #define ETH_DESCR_CONFIG_STR    "Uncached descriptors in DRAM"
+#else
+ #define ETH_DESCR_CONFIG_STR    "Cached descriptors in DRAM"
+#endif
+#else 
+ #error "Ethernet descriptors location undefined"
+#endif /* ETH_DESCR_IN_SRAM or ETH_DESCR_IN_SDRAM*/
+
+/* SW Sync-Barrier: not relevant for 88fxx81*/
+/* Reasnable to define this macro when descriptors in SRAM and buffers in DRAM */
+/* In RX the CPU theoretically might see himself as the descriptor owner,      */
+/* although the buffer hadn't been written to DRAM yet. Performance cost.      */
+/* #define INCLUDE_SYNC_BARR */
+
+/* Buffers cache coherency method (buffers in DRAM) */
+#ifndef MV_CACHE_COHER_SW
+/* Taken from mvCommon.h */
+/* Memory uncached, HW or SW cache coherency is not needed */
+#define MV_UNCACHED             0   
+/* Memory cached, HW cache coherency supported in WriteThrough mode */
+#define MV_CACHE_COHER_HW_WT    1
+/* Memory cached, HW cache coherency supported in WriteBack mode */
+#define MV_CACHE_COHER_HW_WB    2
+/* Memory cached, No HW cache coherency, Cache coherency must be in SW */
+#define MV_CACHE_COHER_SW       3
+
+#endif
+
+/* DRAM cache coherency configuration */
+#define MV_CACHE_COHERENCY  MV_CACHE_COHER_SW
+
+
+#define ETHER_DRAM_COHER    MV_CACHE_COHER_SW   /* No HW coherency in 88Fxx81 devices */
+
+#if (ETHER_DRAM_COHER == MV_CACHE_COHER_HW_WB)
+ #define ETH_SDRAM_CONFIG_STR    "DRAM HW cache coherency (write-back)"
+#elif (ETHER_DRAM_COHER == MV_CACHE_COHER_HW_WT)
+ #define ETH_SDRAM_CONFIG_STR    "DRAM HW cache coherency (write-through)"
+#elif (ETHER_DRAM_COHER == MV_CACHE_COHER_SW)
+ #define ETH_SDRAM_CONFIG_STR    "DRAM SW cache-coherency"
+#elif (ETHER_DRAM_COHER == MV_UNCACHED)
+#   define ETH_SDRAM_CONFIG_STR  "DRAM uncached"
+#else
+ #error "Ethernet-DRAM undefined"
+#endif /* ETHER_DRAM_COHER */
+
+
+/****************************************************************/
+/************* Ethernet driver configuration ********************/
+/****************************************************************/
+
+/* port's default queueus */
+#define ETH_DEF_TXQ         0
+#define ETH_DEF_RXQ         0 
+
+#define MV_ETH_RX_Q_NUM     CONFIG_MV_ETH_RX_Q_NUM
+#define MV_ETH_TX_Q_NUM     CONFIG_MV_ETH_TX_Q_NUM
+
+/* interrupt coalescing setting */
+#define ETH_TX_COAL    		    200
+#define ETH_RX_COAL    		    200
+
+/* Checksum offloading */
+#define TX_CSUM_OFFLOAD
+#define RX_CSUM_OFFLOAD
+
+#endif /* CONFIG_MV_INCLUDE_GIG_ETH */
+
+/****************************************************************/
+/*************** Telephony configuration ************************/
+/****************************************************************/
+#if defined(CONFIG_MV_TDM_LINEAR_MODE)
+ #define MV_TDM_LINEAR_MODE
+#elif defined(CONFIG_MV_TDM_ULAW_MODE)
+ #define MV_TDM_ULAW_MODE
+#endif
+
+#if defined(CONFIG_MV_TDM_5CHANNELS)
+ #define MV_TDM_5CHANNELS 
+#endif
+
+#if defined(CONFIG_MV_TDM_USE_EXTERNAL_PCLK_SOURCE)
+ #define MV_TDM_USE_EXTERNAL_PCLK_SOURCE
+#endif
+
+/* We use the following registers to store DRAM interface pre configuration   */
+/* auto-detection results													  */
+/* IMPORTANT: We are using mask register for that purpose. Before writing     */
+/* to units mask register, make sure main maks register is set to disable     */
+/* all interrupts.                                                            */
+#define DRAM_BUF_REG0   0x30810 /* sdram bank 0 size            */  
+#define DRAM_BUF_REG1   0x30820 /* sdram config                 */
+#define DRAM_BUF_REG2   0x30830 /* sdram mode                   */
+#define DRAM_BUF_REG3   0x308c4 /* dunit control low            */          
+#define DRAM_BUF_REG4   0x60a90 /* sdram address control        */
+#define DRAM_BUF_REG5   0x60a94 /* sdram timing control low     */
+#define DRAM_BUF_REG6   0x60a98 /* sdram timing control high    */
+#define DRAM_BUF_REG7   0x60a9c /* sdram ODT control low        */
+#define DRAM_BUF_REG8   0x60b90 /* sdram ODT control high       */
+#define DRAM_BUF_REG9   0x60b94 /* sdram Dunit ODT control      */
+#define DRAM_BUF_REG10  0x60b98 /* sdram Extended Mode          */
+#define DRAM_BUF_REG11  0x60b9c /* sdram Ddr2 Time Low Reg      */
+#define DRAM_BUF_REG12  0x60a00 /* sdram Ddr2 Time High Reg     */
+#define DRAM_BUF_REG13  0x60a04 /* dunit Ctrl High              */
+#define DRAM_BUF_REG14  0x60b00 /* sdram second DIMM exist      */
+
+/* Following the pre-configuration registers default values restored after    */
+/* auto-detection is done                                                     */
+#define DRAM_BUF_REG_DV 0
+
+/* System Mapping */
+#define SDRAM_CS0_BASE  0x00000000
+#define SDRAM_CS0_SIZE  _256M
+
+#define SDRAM_CS1_BASE  0x10000000
+#define SDRAM_CS1_SIZE  _256M
+
+#define SDRAM_CS2_BASE  0x20000000
+#define SDRAM_CS2_SIZE  _256M
+
+#define SDRAM_CS3_BASE  0x30000000
+#define SDRAM_CS3_SIZE  _256M
+
+/* PEX */
+#define PEX0_MEM_BASE 0xe8000000
+#define PEX0_MEM_SIZE _128M
+
+#define PEX0_IO_BASE 0xf2000000
+#define PEX0_IO_SIZE _1M
+
+/* Device Chip Selects */
+#define NFLASH_CS_BASE 0xfa000000
+#define NFLASH_CS_SIZE _2M
+
+#define SPI_CS_BASE 0xf4000000
+#define SPI_CS_SIZE _16M
+
+#define CRYPT_ENG_BASE	0xf0000000
+#define CRYPT_ENG_SIZE	_2M
+
+#define BOOTDEV_CS_BASE	0xff800000
+#define BOOTDEV_CS_SIZE _8M
+
+/* CS2 - BOOTROM */
+#define DEVICE_CS2_BASE 0xff900000
+#define DEVICE_CS2_SIZE _1M
+
+/* PEX Work arround */
+/* the target we will use for the workarround */
+#define PEX_CONFIG_RW_WA_TARGET PEX0_MEM
+/*a flag that indicates if we are going to use the 
+size and base of the target we using for the workarround
+window */
+#define PEX_CONFIG_RW_WA_USE_ORIGINAL_WIN_VALUES 1
+/* if the above flag is 0 then the following values
+will be used for the workarround window base and size,
+otherwise the following defines will be ignored */
+#define PEX_CONFIG_RW_WA_BASE 0xF3000000
+#define PEX_CONFIG_RW_WA_SIZE _16M
+
+/* Internal registers: size is defined in Controllerenvironment */
+#define INTER_REGS_BASE	0xFEE00000
+
+/* DRAM detection stuff */
+#define MV_DRAM_AUTO_SIZE
+
+/* Board clock detection */
+#define TCLK_AUTO_DETECT    	/* Use Tclk auto detection   */
+#define SYSCLK_AUTO_DETECT	/* Use SysClk auto detection */
+#define PCLCK_AUTO_DETECT  	/* Use PClk auto detection   */
+#define L2CLK_AUTO_DETECT 	/* Use L2Clk auto detection   */
+
+/* PEX-PCI\PCI-PCI Bridge*/
+#define PCI0_IF_PTP		0		/* Bridge exist on pciIf0*/
+
+ 
+
+#endif /* __INCmvSysHwConfigh */
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCntmr.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCntmr.c
new file mode 100644
index 0000000000..717c1507cf
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCntmr.c
@@ -0,0 +1,376 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "mvCntmr.h"
+#include "cpu/mvCpu.h"
+
+/* defines  */       
+#ifdef MV_DEBUG         
+	#define DB(x)	x
+#else                
+	#define DB(x)    
+#endif	             
+
+extern unsigned int whoAmI(void);
+
+/*******************************************************************************
+* mvCntmrLoad - 
+*
+* DESCRIPTION:
+*       Load an init Value to a given counter/timer 
+*
+* INPUT:
+*       countNum - counter number
+*       value - value to be loaded
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_BAD_PARAM on bad parameters , MV_ERROR on error ,MV_OK on sucess
+*******************************************************************************/
+MV_STATUS mvCntmrLoad(MV_U32 countNum, MV_U32 value)
+{
+	if (countNum >= MV_CNTMR_MAX_COUNTER )
+	{
+
+		mvOsPrintf(("mvCntmrLoad: Err. Illigal counter number \n"));
+		return MV_BAD_PARAM;;
+
+	}
+
+	MV_REG_WRITE(CNTMR_RELOAD_REG(countNum),value);
+	MV_REG_WRITE(CNTMR_VAL_REG(countNum),value);
+
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvCntmrRead - 
+*
+* DESCRIPTION:
+*  	Returns the value of the given Counter/Timer     
+*
+* INPUT:
+*       countNum - counter number
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_U32 counter value
+*******************************************************************************/
+MV_U32 mvCntmrRead(MV_U32 countNum)
+{
+	return MV_REG_READ(CNTMR_VAL_REG(countNum));
+}
+
+/*******************************************************************************
+* mvCntmrWrite - 
+*
+* DESCRIPTION:
+*  	Returns the value of the given Counter/Timer     
+*
+* INPUT:
+*       countNum - counter number
+*		countVal - value to write
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None
+*******************************************************************************/
+void mvCntmrWrite(MV_U32 countNum,MV_U32 countVal)
+{
+	MV_REG_WRITE(CNTMR_VAL_REG(countNum),countVal);
+}
+
+/*******************************************************************************
+* mvCntmrCtrlSet - 
+*
+* DESCRIPTION:
+*  	Set the Control to a given counter/timer     
+*
+* INPUT:
+*       countNum - counter number
+*		pCtrl - pointer to MV_CNTMR_CTRL structure 
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_BAD_PARAM on bad parameters , MV_ERROR on error ,MV_OK on sucess
+*******************************************************************************/
+MV_STATUS mvCntmrCtrlSet(MV_U32 countNum, MV_CNTMR_CTRL *pCtrl)
+{
+	MV_U32 cntmrCtrl;
+
+	if (countNum >= MV_CNTMR_MAX_COUNTER )
+	{
+
+		DB(mvOsPrintf(("mvCntmrCtrlSet: Err. Illigal counter number \n")));
+		return MV_BAD_PARAM;;
+
+	}
+
+	/* read control register */
+	cntmrCtrl = MV_REG_READ(CNTMR_CTRL_REG);
+
+	
+	if (pCtrl->enable)	/* enable counter\timer */
+	{
+		cntmrCtrl |= CTCR_ARM_TIMER_EN(countNum);
+	}
+	else	/* disable counter\timer */
+	{
+		cntmrCtrl &= ~CTCR_ARM_TIMER_EN(countNum);
+	}
+
+	if ( pCtrl->autoEnable ) /* Auto mode */
+	{
+		cntmrCtrl |= CTCR_ARM_TIMER_AUTO_EN(countNum);		
+
+	}
+	else 	/* no auto mode */
+	{
+		cntmrCtrl &= ~CTCR_ARM_TIMER_AUTO_EN(countNum);
+	}
+
+	MV_REG_WRITE(CNTMR_CTRL_REG,cntmrCtrl);
+
+	return MV_OK;
+
+}
+
+/*******************************************************************************
+* mvCntmrCtrlGet - 
+*
+* DESCRIPTION:
+*  	Get the Control value of a given counter/timer     
+*
+* INPUT:
+*       countNum - counter number
+*		pCtrl - pointer to MV_CNTMR_CTRL structure 
+*
+* OUTPUT:
+*       Counter\Timer control value
+*
+* RETURN:
+*       MV_BAD_PARAM on bad parameters , MV_ERROR on error ,MV_OK on sucess
+*******************************************************************************/
+MV_STATUS mvCntmrCtrlGet(MV_U32 countNum, MV_CNTMR_CTRL *pCtrl)
+{
+	MV_U32 cntmrCtrl;
+
+	if (countNum >= MV_CNTMR_MAX_COUNTER )
+	{
+		DB(mvOsPrintf(("mvCntmrCtrlGet: Err. Illigal counter number \n")));
+		return MV_BAD_PARAM;;
+	}
+
+	/* read control register */
+	cntmrCtrl = MV_REG_READ(CNTMR_CTRL_REG);
+
+	/* enable counter\timer */
+	if (cntmrCtrl & CTCR_ARM_TIMER_EN(countNum))
+	{
+		pCtrl->enable = MV_TRUE;
+	}
+	else
+	{
+		pCtrl->enable = MV_FALSE;
+	}
+
+	/* counter mode */
+	if (cntmrCtrl & CTCR_ARM_TIMER_AUTO_EN(countNum))
+	{
+		pCtrl->autoEnable = MV_TRUE;
+	}
+	else
+	{
+		pCtrl->autoEnable = MV_FALSE;
+	}
+
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvCntmrEnable - 
+*
+* DESCRIPTION:
+*  	Set the Enable-Bit to logic '1' ==> starting the counter     
+*
+* INPUT:
+*       countNum - counter number
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_BAD_PARAM on bad parameters , MV_ERROR on error ,MV_OK on sucess
+*******************************************************************************/
+MV_STATUS mvCntmrEnable(MV_U32 countNum)
+{
+	MV_U32 cntmrCtrl;
+
+	if (countNum >= MV_CNTMR_MAX_COUNTER )
+	{
+
+		DB(mvOsPrintf(("mvCntmrEnable: Err. Illigal counter number \n")));
+		return MV_BAD_PARAM;;
+
+	}
+
+	/* read control register */
+	cntmrCtrl = MV_REG_READ(CNTMR_CTRL_REG);
+
+	/* enable counter\timer */
+	cntmrCtrl |= CTCR_ARM_TIMER_EN(countNum);
+
+
+	MV_REG_WRITE(CNTMR_CTRL_REG,cntmrCtrl);
+
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvCntmrDisable - 
+*
+* DESCRIPTION:
+*  	Stop the counter/timer running, and returns its Value     
+*
+* INPUT:
+*       countNum - counter number
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_U32 counter\timer value
+*******************************************************************************/
+MV_STATUS mvCntmrDisable(MV_U32 countNum)
+{
+	MV_U32 cntmrCtrl;
+
+	if (countNum >= MV_CNTMR_MAX_COUNTER )
+	{
+
+		DB(mvOsPrintf(("mvCntmrDisable: Err. Illigal counter number \n")));
+		return MV_BAD_PARAM;;
+
+	}
+
+	/* read control register */
+	cntmrCtrl = MV_REG_READ(CNTMR_CTRL_REG);
+
+	/* disable counter\timer */
+	cntmrCtrl &= ~CTCR_ARM_TIMER_EN(countNum);
+
+	MV_REG_WRITE(CNTMR_CTRL_REG,cntmrCtrl);
+
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvCntmrStart - 
+*
+* DESCRIPTION:
+*  	Combined all the sub-operations above to one function: Load,setMode,Enable     
+*
+* INPUT:
+*       countNum - counter number
+*		value - value of the counter\timer to be set
+*		pCtrl - pointer to MV_CNTMR_CTRL structure 
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_BAD_PARAM on bad parameters , MV_ERROR on error ,MV_OK on sucess
+*******************************************************************************/
+MV_STATUS mvCntmrStart(MV_U32 countNum, MV_U32 value,
+                       MV_CNTMR_CTRL *pCtrl)
+{
+
+	if (countNum >= MV_CNTMR_MAX_COUNTER )
+	{
+
+		mvOsPrintf(("mvCntmrDisable: Err. Illigal counter number \n"));
+		return MV_BAD_PARAM;;
+
+	}
+
+	/* load value onto counter\timer */
+	mvCntmrLoad(countNum,value);
+
+	/* set the counter to load in the first time */
+	mvCntmrWrite(countNum,value);
+
+	/* set control for timer \ cunter and enable */
+	mvCntmrCtrlSet(countNum,pCtrl);
+
+	return MV_OK;
+}
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCntmr.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCntmr.h
new file mode 100644
index 0000000000..b911d0f040
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCntmr.h
@@ -0,0 +1,121 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvTmrWtdgh
+#define __INCmvTmrWtdgh
+
+/* includes */
+#include "mvCommon.h"
+#include "mvOs.h"
+#include "cntmr/mvCntmrRegs.h"
+#include "ctrlEnv/mvCtrlEnvSpec.h"
+
+
+/* This enumerator describe counters\watchdog numbers       */
+typedef enum _mvCntmrID
+{
+	TIMER0 = 0,               
+	TIMER1,
+	WATCHDOG,
+	TIMER2,               
+	TIMER3,
+}MV_CNTMR_ID;
+
+
+/* Counter / Timer control structure */
+typedef struct _mvCntmrCtrl
+{
+	MV_BOOL 				enable;		/* enable */
+	MV_BOOL					autoEnable;	/* counter/Timer                    */
+}MV_CNTMR_CTRL;
+
+
+/* Functions */
+
+/* Load an init Value to a given counter/timer */
+MV_STATUS mvCntmrLoad(MV_U32 countNum, MV_U32 value);
+
+/* Returns the value of the given Counter/Timer */
+MV_U32 mvCntmrRead(MV_U32 countNum);
+
+/* Write a value of the given Counter/Timer */
+void mvCntmrWrite(MV_U32 countNum,MV_U32 countVal);
+
+/* Set the Control to a given counter/timer */
+MV_STATUS mvCntmrCtrlSet(MV_U32 countNum, MV_CNTMR_CTRL *pCtrl);
+
+/* Get the value of a given counter/timer */
+MV_STATUS mvCntmrCtrlGet(MV_U32 countNum, MV_CNTMR_CTRL *pCtrl);
+
+/* Set the Enable-Bit to logic '1' ==> starting the counter. */
+MV_STATUS mvCntmrEnable(MV_U32 countNum);
+
+/* Stop the counter/timer running, and returns its Value. */
+MV_STATUS mvCntmrDisable(MV_U32 countNum);
+
+/* Combined all the sub-operations above to one function: Load,setMode,Enable */
+MV_STATUS mvCntmrStart(MV_U32 countNum, MV_U32 value,
+                       MV_CNTMR_CTRL *pCtrl);
+
+#endif /* __INCmvTmrWtdgh */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCntmrRegs.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCntmrRegs.h
new file mode 100644
index 0000000000..b69bc66ad2
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCntmrRegs.h
@@ -0,0 +1,121 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvTmrwtdgRegsh
+#define __INCmvTmrwtdgRegsh
+
+/*******************************************/
+/* ARM Timers Registers Map                */
+/*******************************************/
+
+#define CNTMR_RELOAD_REG(tmrNum)	(CNTMR_BASE + 0x10 + (tmrNum)*8 + \
+						(((tmrNum) <= 3)?0:8))
+#define CNTMR_VAL_REG(tmrNum)		(CNTMR_BASE + 0x14 + (tmrNum)*8 + \
+						(((tmrNum) <= 3)?0:8))
+#define CNTMR_CTRL_REG			(CNTMR_BASE)
+
+/*For MV78XX0*/
+#define CNTMR_CAUSE_REG		(CPU_AHB_MBUS_CAUSE_INT_REG(whoAmI()))
+#define CNTMR_MASK_REG		(CPU_AHB_MBUS_MASK_INT_REG(whoAmI()))
+
+/* ARM Timers Registers Map                */
+/*******************************************/
+
+
+/* ARM Timers Control Register */
+/* CPU_TIMERS_CTRL_REG (CTCR) */
+
+#define TIMER0_NUM				0
+#define TIMER1_NUM				1
+#define WATCHDOG_NUM			2
+#define TIMER2_NUM				3
+#define TIMER3_NUM				4
+	
+#define CTCR_ARM_TIMER_EN_OFFS(cntr)	(cntr * 2)
+#define CTCR_ARM_TIMER_EN_MASK(cntr)	(1 << CTCR_ARM_TIMER_EN_OFFS)
+#define CTCR_ARM_TIMER_EN(cntr)			(1 << CTCR_ARM_TIMER_EN_OFFS(cntr))
+#define CTCR_ARM_TIMER_DIS(cntr)		(0 << CTCR_ARM_TIMER_EN_OFFS(cntr))
+	
+#define CTCR_ARM_TIMER_AUTO_OFFS(cntr)	((cntr * 2) + 1)
+#define CTCR_ARM_TIMER_AUTO_MASK(cntr)	BIT1
+#define CTCR_ARM_TIMER_AUTO_EN(cntr)	(1 << CTCR_ARM_TIMER_AUTO_OFFS(cntr))
+#define CTCR_ARM_TIMER_AUTO_DIS(cntr)	(0 << CTCR_ARM_TIMER_AUTO_OFFS(cntr))
+
+
+/* ARM Timer\Watchdog Reload Register */
+/* CNTMR_RELOAD_REG (TRR) */
+
+#define TRG_ARM_TIMER_REL_OFFS			0
+#define TRG_ARM_TIMER_REL_MASK			0xffffffff
+
+/* ARM Timer\Watchdog Register */
+/* CNTMR_VAL_REG (TVRG) */
+
+#define TVR_ARM_TIMER_OFFS			0
+#define TVR_ARM_TIMER_MASK			0xffffffff
+#define TVR_ARM_TIMER_MAX			0xffffffff
+
+
+
+#endif /* __INCmvTmrwtdgRegsh */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/cpu/mvCpuCntrs.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/cpu/mvCpuCntrs.c
new file mode 100644
index 0000000000..609e674e3a
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/cpu/mvCpuCntrs.c
@@ -0,0 +1,207 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include "mvOs.h"
+#include "mvCpuCntrs.h"
+
+
+const static MV_CPU_CNTRS_OPS  mvCpuCntrsOpsTbl[MV_CPU_CNTRS_NUM][MV_CPU_CNTRS_OPS_NUM] =
+{   
+    /*0*/
+    {   
+        MV_CPU_CNTRS_CYCLES,            MV_CPU_CNTRS_DCACHE_READ_HIT,       MV_CPU_CNTRS_DCACHE_READ_MISS,
+        MV_CPU_CNTRS_DCACHE_WRITE_HIT,  MV_CPU_CNTRS_DCACHE_WRITE_MISS,     MV_CPU_CNTRS_INSTRUCTIONS, 
+        MV_CPU_CNTRS_INVALID,           MV_CPU_CNTRS_INVALID,               MV_CPU_CNTRS_INVALID,
+        MV_CPU_CNTRS_MMU_READ_LATENCY,  MV_CPU_CNTRS_ICACHE_READ_LATENCY,   MV_CPU_CNTRS_WB_WRITE_LATENCY,
+        MV_CPU_CNTRS_LDM_STM_HOLD,      MV_CPU_CNTRS_INVALID,               MV_CPU_CNTRS_INVALID,
+        MV_CPU_CNTRS_DATA_WRITE_ACCESS, MV_CPU_CNTRS_DATA_READ_ACCESS,      MV_CPU_CNTRS_INVALID,
+        MV_CPU_CNTRS_BRANCH_PREDICT_COUNT,
+    },
+    /*1*/
+    {   
+        MV_CPU_CNTRS_CYCLES,            MV_CPU_CNTRS_ICACHE_READ_MISS,      MV_CPU_CNTRS_DCACHE_READ_MISS,
+        MV_CPU_CNTRS_DCACHE_WRITE_MISS, MV_CPU_CNTRS_ITLB_MISS,             MV_CPU_CNTRS_SINGLE_ISSUE,
+        MV_CPU_CNTRS_INVALID,           MV_CPU_CNTRS_BRANCH_RETIRED,        MV_CPU_CNTRS_INVALID, 
+        MV_CPU_CNTRS_MMU_READ_BEAT,     MV_CPU_CNTRS_ICACHE_READ_LATENCY,   MV_CPU_CNTRS_WB_WRITE_BEAT,
+        MV_CPU_CNTRS_INVALID,           MV_CPU_CNTRS_IS_HOLD,               MV_CPU_CNTRS_DATA_READ_ACCESS,
+        MV_CPU_CNTRS_INVALID,           MV_CPU_CNTRS_INVALID,               MV_CPU_CNTRS_INVALID,
+        MV_CPU_CNTRS_INVALID,
+    },
+    /*2*/   
+    {
+        MV_CPU_CNTRS_CYCLES,            MV_CPU_CNTRS_INVALID,               MV_CPU_CNTRS_DCACHE_ACCESS, 
+        MV_CPU_CNTRS_DTLB_MISS,         MV_CPU_CNTRS_INVALID,               MV_CPU_CNTRS_INVALID,
+        MV_CPU_CNTRS_INVALID,           MV_CPU_CNTRS_BRANCH_PREDICT_MISS,   MV_CPU_CNTRS_WB_WRITE_BEAT,
+        MV_CPU_CNTRS_INVALID,           MV_CPU_CNTRS_DCACHE_READ_LATENCY,   MV_CPU_CNTRS_DCACHE_WRITE_LATENCY,
+        MV_CPU_CNTRS_INVALID,           MV_CPU_CNTRS_INVALID,               MV_CPU_CNTRS_BIU_SIMULT_ACCESS,
+        MV_CPU_CNTRS_INVALID,           MV_CPU_CNTRS_INVALID,               MV_CPU_CNTRS_INVALID,
+        MV_CPU_CNTRS_INVALID,
+    },
+    /*3*/   
+    {
+        MV_CPU_CNTRS_CYCLES,            MV_CPU_CNTRS_DCACHE_READ_MISS,      MV_CPU_CNTRS_DCACHE_WRITE_MISS,
+        MV_CPU_CNTRS_TLB_MISS,          MV_CPU_CNTRS_INVALID,               MV_CPU_CNTRS_INVALID, 
+        MV_CPU_CNTRS_INVALID,           MV_CPU_CNTRS_BRANCH_TAKEN,          MV_CPU_CNTRS_WB_FULL_CYCLES,
+        MV_CPU_CNTRS_INVALID,           MV_CPU_CNTRS_DCACHE_READ_BEAT,      MV_CPU_CNTRS_DCACHE_WRITE_BEAT,
+        MV_CPU_CNTRS_INVALID,           MV_CPU_CNTRS_INVALID,               MV_CPU_CNTRS_BIU_ANY_ACCESS,
+        MV_CPU_CNTRS_INVALID,           MV_CPU_CNTRS_INVALID,               MV_CPU_CNTRS_DATA_WRITE_ACCESS,
+        MV_CPU_CNTRS_INVALID,
+    }
+};
+
+MV_CPU_CNTRS_ENTRY  mvCpuCntrsTbl[MV_CPU_CNTRS_NUM];
+
+MV_CPU_CNTRS_EVENT*   mvCpuCntrsEventTbl[128];
+
+void mvCpuCntrsReset(void)
+{
+    MV_U32 reg = 0;
+   
+    MV_ASM ("mcr p15, 0, %0, c15, c13, 0" : : "r" (reg));
+    MV_ASM ("mcr p15, 0, %0, c15, c13, 1" : : "r" (reg));
+    MV_ASM ("mcr p15, 0, %0, c15, c13, 2" : : "r" (reg));
+    MV_ASM ("mcr p15, 0, %0, c15, c13, 3" : : "r" (reg));
+    MV_ASM ("mcr p15, 0, %0, c15, c13, 4" : : "r" (reg));
+    MV_ASM ("mcr p15, 0, %0, c15, c13, 5" : : "r" (reg));
+    MV_ASM ("mcr p15, 0, %0, c15, c13, 6" : : "r" (reg));
+    MV_ASM ("mcr p15, 0, %0, c15, c13, 7" : : "r" (reg));
+}
+               
+void program_counter(int counter, int op)
+{
+    MV_U32 reg =  (1 << op) | 0x1; /*enable*/
+
+    switch(counter)
+    {
+        case 0:
+         __asm__ __volatile__ ("mcr p15, 0, %0, c15, c12, 0" : : "r" (reg));
+         return;
+
+        case 1:
+         __asm__ __volatile__ ("mcr p15, 0, %0, c15, c12, 1" : : "r" (reg));
+         return;
+
+        case 2:
+         __asm__ __volatile__ ("mcr p15, 0, %0, c15, c12, 2" : : "r" (reg));
+         return;
+
+        case 3:
+         __asm__ __volatile__ ("mcr p15, 0, %0, c15, c12, 3" : : "r" (reg));
+         return;
+
+        default:
+            mvOsPrintf("error in program_counter: bad counter number (%d)\n", counter);
+    }
+    return;
+}
+
+void mvCpuCntrsEventClear(MV_CPU_CNTRS_EVENT* pEvent)
+{
+    int i;
+
+    for(i=0; i<MV_CPU_CNTRS_NUM; i++)
+    {
+        pEvent->counters_sum[i] = 0;
+    }
+    pEvent->num_of_measurements = 0;
+}
+
+                                                                                                              
+MV_CPU_CNTRS_EVENT* mvCpuCntrsEventCreate(char* name, MV_U32 print_threshold)
+{
+    int                     i;
+    MV_CPU_CNTRS_EVENT*     event = mvOsMalloc(sizeof(MV_CPU_CNTRS_EVENT));
+
+    if(event)
+    {
+        strncpy(event->name, name, sizeof(event->name));
+        event->num_of_measurements = 0;
+        event->avg_sample_count = print_threshold;
+        for(i=0; i<MV_CPU_CNTRS_NUM; i++)
+        {
+            event->counters_before[i] = 0;
+            event->counters_after[i] = 0;
+            event->counters_sum[i] = 0;
+        }
+    }
+    return event;
+}
+
+void    mvCpuCntrsEventDelete(MV_CPU_CNTRS_EVENT* event)
+{
+    if(event != NULL)
+        mvOsFree(event);
+}
+
+                                                                                     
+MV_STATUS   mvCpuCntrsProgram(int counter, MV_CPU_CNTRS_OPS op, 
+                                 char* name, MV_U32 overhead)
+{
+    int     i;
+
+    /* Find required operations */
+    for(i=0; i<MV_CPU_CNTRS_OPS_NUM; i++)
+    {
+        if( mvCpuCntrsOpsTbl[counter][i] == op)
+        {
+            strncpy(mvCpuCntrsTbl[counter].name, name, sizeof(mvCpuCntrsTbl[counter].name));
+            mvCpuCntrsTbl[counter].operation = op;
+            mvCpuCntrsTbl[counter].opIdx = i+1;
+            mvCpuCntrsTbl[counter].overhead = overhead;
+            program_counter(counter, mvCpuCntrsTbl[counter].opIdx);
+            mvOsPrintf("Counter=%d, opIdx=%d, overhead=%d\n",
+                        counter, mvCpuCntrsTbl[counter].opIdx, mvCpuCntrsTbl[counter].overhead);
+            return MV_OK;
+        }
+    }
+    return MV_NOT_FOUND;
+}
+
+void    mvCpuCntrsShow(MV_CPU_CNTRS_EVENT* pEvent)
+{
+    int     i;
+    MV_U64  counters_avg;
+
+    if(pEvent->num_of_measurements < pEvent->avg_sample_count) 
+        return;
+
+    mvOsPrintf("%16s: ", pEvent->name);
+    for(i=0; i<MV_CPU_CNTRS_NUM; i++)
+    {
+        counters_avg = mvOsDivMod64(pEvent->counters_sum[i], 
+                                  pEvent->num_of_measurements, NULL);
+        if(counters_avg >= mvCpuCntrsTbl[i].overhead)
+            counters_avg -= mvCpuCntrsTbl[i].overhead;
+        else
+            counters_avg = 0;
+
+        mvOsPrintf("%s=%5llu, ", mvCpuCntrsTbl[i].name, counters_avg);
+    }
+    mvOsPrintf("\n");
+    mvCpuCntrsEventClear(pEvent);
+    mvCpuCntrsReset();
+}
+
+void    mvCpuCntrsStatus(void)
+{
+    int i;
+
+    for(i=0; i<MV_CPU_CNTRS_NUM; i++)
+    {
+        mvOsPrintf("#%d: %s, overhead=%d\n", 
+            i, mvCpuCntrsTbl[i].name, mvCpuCntrsTbl[i].overhead);
+    }
+}
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/cpu/mvCpuCntrs.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/cpu/mvCpuCntrs.h
new file mode 100644
index 0000000000..8d49af0095
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/cpu/mvCpuCntrs.h
@@ -0,0 +1,213 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+*******************************************************************************/
+#ifndef __mvCpuCntrs_h__
+#define __mvCpuCntrs_h__
+
+#include "mvTypes.h"
+#include "mvOs.h"
+
+
+#define MV_CPU_CNTRS_NUM            4
+#define MV_CPU_CNTRS_OPS_NUM        32
+
+typedef enum
+{
+    MV_CPU_CNTRS_INVALID = 0,
+    MV_CPU_CNTRS_CYCLES,
+    MV_CPU_CNTRS_ICACHE_READ_MISS,
+    MV_CPU_CNTRS_DCACHE_ACCESS,
+    MV_CPU_CNTRS_DCACHE_READ_MISS,
+    MV_CPU_CNTRS_DCACHE_READ_HIT,
+    MV_CPU_CNTRS_DCACHE_WRITE_MISS,
+    MV_CPU_CNTRS_DCACHE_WRITE_HIT,
+    MV_CPU_CNTRS_DTLB_MISS,
+    MV_CPU_CNTRS_TLB_MISS,
+    MV_CPU_CNTRS_ITLB_MISS,
+    MV_CPU_CNTRS_INSTRUCTIONS,
+    MV_CPU_CNTRS_SINGLE_ISSUE,
+    MV_CPU_CNTRS_MMU_READ_LATENCY,
+    MV_CPU_CNTRS_MMU_READ_BEAT,
+    MV_CPU_CNTRS_BRANCH_RETIRED,
+    MV_CPU_CNTRS_BRANCH_TAKEN,
+    MV_CPU_CNTRS_BRANCH_PREDICT_MISS,
+    MV_CPU_CNTRS_BRANCH_PREDICT_COUNT,
+    MV_CPU_CNTRS_WB_FULL_CYCLES,
+    MV_CPU_CNTRS_WB_WRITE_LATENCY,
+    MV_CPU_CNTRS_WB_WRITE_BEAT,
+    MV_CPU_CNTRS_ICACHE_READ_LATENCY,
+    MV_CPU_CNTRS_ICACHE_READ_BEAT,
+    MV_CPU_CNTRS_DCACHE_READ_LATENCY,
+    MV_CPU_CNTRS_DCACHE_READ_BEAT,
+    MV_CPU_CNTRS_DCACHE_WRITE_LATENCY,
+    MV_CPU_CNTRS_DCACHE_WRITE_BEAT,
+    MV_CPU_CNTRS_LDM_STM_HOLD,
+    MV_CPU_CNTRS_IS_HOLD,
+    MV_CPU_CNTRS_DATA_WRITE_ACCESS,
+    MV_CPU_CNTRS_DATA_READ_ACCESS,
+    MV_CPU_CNTRS_BIU_SIMULT_ACCESS,
+    MV_CPU_CNTRS_BIU_ANY_ACCESS,
+
+} MV_CPU_CNTRS_OPS;
+
+typedef struct
+{
+    char                name[16];
+    MV_CPU_CNTRS_OPS    operation;
+    int                 opIdx;
+    MV_U32              overhead;
+    
+} MV_CPU_CNTRS_ENTRY;
+
+
+typedef struct
+{
+    char   name[16];
+    MV_U32 num_of_measurements;
+    MV_U32 avg_sample_count;
+    MV_U64 counters_before[MV_CPU_CNTRS_NUM];
+    MV_U64 counters_after[MV_CPU_CNTRS_NUM];
+    MV_U64 counters_sum[MV_CPU_CNTRS_NUM];
+
+} MV_CPU_CNTRS_EVENT;
+
+extern MV_CPU_CNTRS_ENTRY  mvCpuCntrsTbl[MV_CPU_CNTRS_NUM];
+
+
+MV_STATUS           mvCpuCntrsProgram(int counter, MV_CPU_CNTRS_OPS op, 
+                                      char* name, MV_U32 overhead);
+void                mvCpuCntrsInit(void);
+MV_CPU_CNTRS_EVENT* mvCpuCntrsEventCreate(char* name, MV_U32 print_threshold);
+void                mvCpuCntrsEventDelete(MV_CPU_CNTRS_EVENT* event);
+void                mvCpuCntrsReset(void);
+void                mvCpuCntrsShow(MV_CPU_CNTRS_EVENT* pEvent);
+void 		    mvCpuCntrsEventClear(MV_CPU_CNTRS_EVENT* pEvent);
+
+/* internal */
+void 		    program_counter(int counter, int op);
+
+static INLINE MV_U64 mvCpuCntrsRead(const int counter)
+{
+    MV_U32 low = 0, high = 0;
+    MV_U32 ll = 0;
+    
+    switch(counter)
+    {
+        case 0:
+            MV_ASM  ("mcr p15, 0, %0, c15, c12, 0" : : "r" (ll));
+            MV_ASM  ("mrc p15, 0, %0, c15, c13, 0" : "=r" (low));
+            MV_ASM  ("mrc p15, 0, %0, c15, c13, 1" : "=r" (high));
+         break;
+
+        case 1:
+            MV_ASM  ("mcr p15, 0, %0, c15, c12, 1" : : "r" (ll));
+            MV_ASM  ("mrc p15, 0, %0, c15, c13, 2" : "=r" (low));
+            MV_ASM  ("mrc p15, 0, %0, c15, c13, 3" : "=r" (high));
+         break;
+
+        case 2:
+            MV_ASM  ("mcr p15, 0, %0, c15, c12, 2" : : "r" (ll));
+            MV_ASM  ("mrc p15, 0, %0, c15, c13, 4" : "=r" (low));
+            MV_ASM  ("mrc p15, 0, %0, c15, c13, 5" : "=r" (high));
+         break;
+
+        case 3:
+            MV_ASM  ("mcr p15, 0, %0, c15, c12, 3" : : "r" (ll));
+            MV_ASM  ("mrc p15, 0, %0, c15, c13, 6" : "=r" (low));
+            MV_ASM  ("mrc p15, 0, %0, c15, c13, 7" : "=r" (high));
+         break;
+
+        default:
+            mvOsPrintf("mv_cpu_cntrs_read: bad counter number (%d)\n", counter);
+    }
+    program_counter(counter, mvCpuCntrsTbl[counter].opIdx);
+    return (((MV_U64)high << 32 ) | low);
+
+}
+
+
+static INLINE void mvCpuCntrsReadBefore(MV_CPU_CNTRS_EVENT* pEvent)
+{
+#if 0
+    int i;
+
+    /* order is important - we want to measure the cycle count last here! */
+    for(i=0; i<MV_CPU_CNTRS_NUM; i++)
+        pEvent->counters_before[i] = mvCpuCntrsRead(i);
+#else
+    pEvent->counters_before[1] = mvCpuCntrsRead(1);
+    pEvent->counters_before[3] = mvCpuCntrsRead(3);
+    pEvent->counters_before[0] = mvCpuCntrsRead(0);
+    pEvent->counters_before[2] = mvCpuCntrsRead(2);
+#endif
+}
+
+static INLINE void mvCpuCntrsReadAfter(MV_CPU_CNTRS_EVENT* pEvent)
+{
+    int i;
+
+#if 0
+    /* order is important - we want to measure the cycle count first here! */
+    for(i=0; i<MV_CPU_CNTRS_NUM; i++)
+        pEvent->counters_after[i] = mvCpuCntrsRead(i);
+#else
+    pEvent->counters_after[2] = mvCpuCntrsRead(2);
+    pEvent->counters_after[0] = mvCpuCntrsRead(0);
+    pEvent->counters_after[3] = mvCpuCntrsRead(3);
+    pEvent->counters_after[1] = mvCpuCntrsRead(1);
+#endif 
+
+    for(i=0; i<MV_CPU_CNTRS_NUM; i++)
+    {
+        pEvent->counters_sum[i] += (pEvent->counters_after[i] - pEvent->counters_before[i]);	
+    }
+    pEvent->num_of_measurements++;
+}
+
+
+#ifdef CONFIG_MV_CPU_PERF_CNTRS
+
+#define MV_CPU_CNTRS_READ(counter)  mvCpuCntrsRead(counter)
+
+#define MV_CPU_CNTRS_START(event)	mvCpuCntrsReadBefore(event)
+
+#define MV_CPU_CNTRS_STOP(event)	mvCpuCntrsReadAfter(event)
+			
+#define MV_CPU_CNTRS_SHOW(event)	mvCpuCntrsShow(event)
+
+#else
+
+#define MV_CPU_CNTRS_READ(counter)
+#define MV_CPU_CNTRS_START(event)
+#define MV_CPU_CNTRS_STOP(event)
+#define MV_CPU_CNTRS_SHOW(event)
+
+#endif /* CONFIG_MV_CPU_PERF_CNTRS */
+
+
+#endif /* __mvCpuCntrs_h__ */
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/cpu/mvCpuL2Cntrs.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/cpu/mvCpuL2Cntrs.c
new file mode 100644
index 0000000000..033386224f
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/cpu/mvCpuL2Cntrs.c
@@ -0,0 +1,143 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include "mvOs.h"
+#include "mvCpuL2Cntrs.h"
+
+
+
+MV_CPU_L2_CNTRS_ENTRY   mvCpuL2CntrsTbl[MV_CPU_L2_CNTRS_NUM];
+
+MV_CPU_L2_CNTRS_EVENT*  mvCpuL2CntrsEventTbl[128];
+
+void mvCpuL2CntrsReset(void)
+{
+    MV_U32 reg = 0;
+   
+    MV_ASM ("mcr p15, 6, %0, c15, c13, 0" : : "r" (reg));
+    MV_ASM ("mcr p15, 6, %0, c15, c13, 1" : : "r" (reg));
+    MV_ASM ("mcr p15, 6, %0, c15, c13, 2" : : "r" (reg));
+    MV_ASM ("mcr p15, 6, %0, c15, c13, 3" : : "r" (reg));
+}
+               
+static void mvCpuL2CntrConfig(int counter, int op)
+{
+    MV_U32 reg =  (1 << op) | 0x1; /*enable*/
+
+    switch(counter)
+    {
+        case 0:
+         MV_ASM ("mcr p15, 6, %0, c15, c12, 0" : : "r" (reg));
+         return;
+
+        case 1:
+         MV_ASM ("mcr p15, 6, %0, c15, c12, 1" : : "r" (reg));
+         return;
+
+        default:
+            mvOsPrintf("mvCpuL2CntrConfig: bad counter number (%d)\n", counter);
+    }
+    return;
+}
+
+void mvCpuL2CntrsEventClear(MV_CPU_L2_CNTRS_EVENT* pEvent)
+{
+    int i;
+
+    for(i=0; i<MV_CPU_L2_CNTRS_NUM; i++)
+    {
+        pEvent->counters_sum[i] = 0;
+    }
+    pEvent->num_of_measurements = 0;
+}
+
+                                                                                                              
+MV_CPU_L2_CNTRS_EVENT* mvCpuL2CntrsEventCreate(char* name, MV_U32 print_threshold)
+{
+    int                     i;
+    MV_CPU_L2_CNTRS_EVENT*  event = mvOsMalloc(sizeof(MV_CPU_L2_CNTRS_EVENT));
+
+    if(event)
+    {
+        strncpy(event->name, name, sizeof(event->name));
+        event->num_of_measurements = 0;
+        event->avg_sample_count = print_threshold;
+        for(i=0; i<MV_CPU_L2_CNTRS_NUM; i++)
+        {
+            event->counters_before[i] = 0;
+            event->counters_after[i] = 0;
+            event->counters_sum[i] = 0;
+        }
+    }
+    return event;
+}
+
+void    mvCpuL2CntrsEventDelete(MV_CPU_L2_CNTRS_EVENT* event)
+{
+    if(event != NULL)
+        mvOsFree(event);
+}
+
+                                                                                     
+MV_STATUS   mvCpuL2CntrsProgram(int counter, MV_CPU_L2_CNTRS_OPS op, 
+                                 char* name, MV_U32 overhead)
+{
+    strncpy(mvCpuL2CntrsTbl[counter].name, name, sizeof(mvCpuL2CntrsTbl[counter].name));
+    mvCpuL2CntrsTbl[counter].operation = op;
+    mvCpuL2CntrsTbl[counter].opIdx = op;
+    mvCpuL2CntrsTbl[counter].overhead = overhead;
+    mvCpuL2CntrConfig(counter, op);
+    mvOsPrintf("CPU L2 Counter %d: operation=%d, overhead=%d\n",
+                        counter, op, overhead);
+    return MV_OK;
+}
+
+void    mvCpuL2CntrsShow(MV_CPU_L2_CNTRS_EVENT* pEvent)
+{
+    int     i;
+    MV_U64  counters_avg;
+
+    if(pEvent->num_of_measurements < pEvent->avg_sample_count) 
+        return;
+
+    mvOsPrintf("%16s: ", pEvent->name);
+    for(i=0; i<MV_CPU_L2_CNTRS_NUM; i++)
+    {
+        counters_avg = mvOsDivMod64(pEvent->counters_sum[i], 
+                                    pEvent->num_of_measurements, NULL);
+
+        if(counters_avg >= mvCpuL2CntrsTbl[i].overhead)
+            counters_avg -= mvCpuL2CntrsTbl[i].overhead;
+        else
+            counters_avg = 0;
+
+        mvOsPrintf("%s=%5llu, ", mvCpuL2CntrsTbl[i].name, counters_avg);
+    }
+    mvOsPrintf("\n");
+    mvCpuL2CntrsEventClear(pEvent);
+    mvCpuL2CntrsReset();
+}
+
+void    mvCpuL2CntrsStatus(void)
+{
+    int i;
+
+    for(i=0; i<MV_CPU_L2_CNTRS_NUM; i++)
+    {
+        mvOsPrintf("#%d: %s, overhead=%d\n", 
+            i, mvCpuL2CntrsTbl[i].name, mvCpuL2CntrsTbl[i].overhead);
+    }
+}
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/cpu/mvCpuL2Cntrs.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/cpu/mvCpuL2Cntrs.h
new file mode 100644
index 0000000000..570d701958
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/cpu/mvCpuL2Cntrs.h
@@ -0,0 +1,151 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+*******************************************************************************/
+#ifndef __mvCpuL2Cntrs_h__
+#define __mvCpuL2Cntrs_h__
+
+#include "mvTypes.h"
+#include "mvOs.h"
+
+
+#define MV_CPU_L2_CNTRS_NUM         2
+
+typedef enum
+{
+    MV_CPU_L2_CNTRS_ENABLE = 0,
+    MV_CPU_L2_CNTRS_DATA_REQ,
+    MV_CPU_L2_CNTRS_DATA_MISS_REQ,
+    MV_CPU_L2_CNTRS_INST_REQ,
+    MV_CPU_L2_CNTRS_INST_MISS_REQ,
+    MV_CPU_L2_CNTRS_DATA_READ_REQ,
+    MV_CPU_L2_CNTRS_DATA_READ_MISS_REQ,
+    MV_CPU_L2_CNTRS_DATA_WRITE_REQ,
+    MV_CPU_L2_CNTRS_DATA_WRITE_MISS_REQ,
+    MV_CPU_L2_CNTRS_RESERVED,
+    MV_CPU_L2_CNTRS_DIRTY_EVICT_REQ,
+    MV_CPU_L2_CNTRS_EVICT_BUFF_STALL,
+    MV_CPU_L2_CNTRS_ACTIVE_CYCLES,
+
+} MV_CPU_L2_CNTRS_OPS;
+
+typedef struct
+{
+    char                name[16];
+    MV_CPU_L2_CNTRS_OPS operation;
+    int                 opIdx;
+    MV_U32              overhead;
+    
+} MV_CPU_L2_CNTRS_ENTRY;
+
+
+typedef struct
+{
+    char   name[16];
+    MV_U32 num_of_measurements;
+    MV_U32 avg_sample_count;
+    MV_U64 counters_before[MV_CPU_L2_CNTRS_NUM];
+    MV_U64 counters_after[MV_CPU_L2_CNTRS_NUM];
+    MV_U64 counters_sum[MV_CPU_L2_CNTRS_NUM];
+
+} MV_CPU_L2_CNTRS_EVENT;
+
+
+MV_STATUS               mvCpuL2CntrsProgram(int counter, MV_CPU_L2_CNTRS_OPS op, 
+                                        char* name, MV_U32 overhead);
+void                    mvCpuL2CntrsInit(void);
+MV_CPU_L2_CNTRS_EVENT*  mvCpuL2CntrsEventCreate(char* name, MV_U32 print_threshold);
+void                    mvCpuL2CntrsEventDelete(MV_CPU_L2_CNTRS_EVENT* event);
+void                    mvCpuL2CntrsReset(void);
+void                    mvCpuL2CntrsShow(MV_CPU_L2_CNTRS_EVENT* pEvent);
+void 			mvCpuL2CntrsEventClear(MV_CPU_L2_CNTRS_EVENT* pEvent);
+
+static INLINE MV_U64 mvCpuL2CntrsRead(const int counter)
+{
+    MV_U32 low = 0, high = 0;
+    
+    switch(counter)
+    {
+        case 0:
+            MV_ASM  ("mrc p15, 6, %0, c15, c13, 0" : "=r" (low));
+            MV_ASM  ("mrc p15, 6, %0, c15, c13, 1" : "=r" (high));
+         break;
+
+        case 1:
+            MV_ASM  ("mrc p15, 6, %0, c15, c13, 2" : "=r" (low));
+            MV_ASM  ("mrc p15, 6, %0, c15, c13, 3" : "=r" (high));
+         break;
+
+        default:
+            mvOsPrintf("mvCpuL2CntrsRead: bad counter number (%d)\n", counter);
+    }
+    return (((MV_U64)high << 32 ) | low);
+
+}
+
+static INLINE void mvCpuL2CntrsReadBefore(MV_CPU_L2_CNTRS_EVENT* pEvent)
+{
+    int i;
+
+    for(i=0; i<MV_CPU_L2_CNTRS_NUM; i++)
+        pEvent->counters_before[i] = mvCpuL2CntrsRead(i);
+}
+
+static INLINE void mvCpuL2CntrsReadAfter(MV_CPU_L2_CNTRS_EVENT* pEvent)
+{
+    int i;
+
+    for(i=0; i<MV_CPU_L2_CNTRS_NUM; i++) 
+    {
+        pEvent->counters_after[i] = mvCpuL2CntrsRead(i);
+        pEvent->counters_sum[i] += (pEvent->counters_after[i] - pEvent->counters_before[i]);	
+    }
+    pEvent->num_of_measurements++;
+}
+
+
+#ifdef CONFIG_MV_CPU_L2_PERF_CNTRS
+
+#define MV_CPU_L2_CNTRS_READ(counter)   mvCpuL2CntrsRead(counter)
+
+#define MV_CPU_L2_CNTRS_START(event)	mvCpuL2CntrsReadBefore(event)
+
+#define MV_CPU_L2_CNTRS_STOP(event)	    mvCpuL2CntrsReadAfter(event)
+			
+#define MV_CPU_L2_CNTRS_SHOW(event)	    mvCpuL2CntrsShow(event)
+
+#else
+
+#define MV_CPU_L2_CNTRS_READ(counter)
+#define MV_CPU_L2_CNTRS_START(event)
+#define MV_CPU_L2_CNTRS_STOP(event)
+#define MV_CPU_L2_CNTRS_SHOW(event)
+
+#endif /* CONFIG_MV_CPU_L2_PERF_CNTRS */
+
+
+#endif /* __mvCpuL2Cntrs_h__ */
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDram.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDram.c
new file mode 100644
index 0000000000..d1b8a3d378
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDram.c
@@ -0,0 +1,1479 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "ddr1_2/mvDram.h"
+#include "boardEnv/mvBoardEnvLib.h"
+
+#undef MV_DEBUG
+#ifdef MV_DEBUG
+#define DB(x) x
+#else
+#define DB(x)
+#endif
+
+static MV_VOID cpyDimm2BankInfo(MV_DIMM_INFO *pDimmInfo, 
+                                            MV_DRAM_BANK_INFO *pBankInfo);
+static MV_U32  cas2ps(MV_U8 spd_byte);
+/*******************************************************************************
+* mvDramBankGet - Get the DRAM bank paramters.
+*
+* DESCRIPTION:
+*       This function retrieves DRAM bank parameters as described in 
+*       DRAM_BANK_INFO struct to the controller DRAM unit. In case the board 
+*       has its DRAM on DIMMs it will use its EEPROM to extract SPD data
+*       from it. Otherwise, if the DRAM is soldered on board, the function 
+*       should insert its bank information into MV_DRAM_BANK_INFO struct.
+*
+* INPUT:
+*       bankNum  - Board DRAM bank number.
+*
+* OUTPUT:
+*       pBankInfo  - DRAM bank information struct.
+*
+* RETURN:
+*       MV_FAIL - Bank parameters could not be read.
+*
+*******************************************************************************/
+MV_STATUS mvDramBankInfoGet(MV_U32 bankNum, MV_DRAM_BANK_INFO *pBankInfo)
+{
+    MV_DIMM_INFO dimmInfo;
+
+    DB(mvOsPrintf("Dram: mvDramBankInfoGet bank %d\n", bankNum)); 
+    /* zero pBankInfo structure */
+    memset(pBankInfo, 0, sizeof(*pBankInfo));
+
+    if((NULL == pBankInfo) || (bankNum >= MV_DRAM_MAX_CS ))
+    {
+        DB(mvOsPrintf("Dram: mvDramBankInfoGet bad params \n")); 
+        return MV_BAD_PARAM;
+    }
+    if( MV_OK != dimmSpdGet((MV_U32)(bankNum/2), &dimmInfo))
+    {
+    DB(mvOsPrintf("Dram: ERR dimmSpdGet failed to get dimm info \n"));
+    return MV_FAIL;
+    }
+    if((dimmInfo.numOfModuleBanks == 1) && ((bankNum % 2) == 1))
+    {
+    DB(mvOsPrintf("Dram: ERR dimmSpdGet. Can't find DIMM bank 2 \n"));
+    return MV_FAIL;
+    }
+
+    /* convert Dimm info to Bank info */
+    cpyDimm2BankInfo(&dimmInfo, pBankInfo);
+    
+    return MV_OK;
+}
+
+/*******************************************************************************
+* cpyDimm2BankInfo - Convert a Dimm info struct into a bank info struct.
+*
+* DESCRIPTION:
+*       Convert a Dimm info struct into a bank info struct.
+*
+* INPUT:
+*       pDimmInfo - DIMM information structure.
+*
+* OUTPUT:
+*       pBankInfo  - DRAM bank information struct.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+static MV_VOID cpyDimm2BankInfo(MV_DIMM_INFO *pDimmInfo, 
+                                                MV_DRAM_BANK_INFO *pBankInfo)
+{
+    pBankInfo->memoryType = pDimmInfo->memoryType;        
+
+    /* DIMM dimensions */
+    pBankInfo->numOfRowAddr = pDimmInfo->numOfRowAddr;
+    pBankInfo->numOfColAddr = pDimmInfo->numOfColAddr;
+    pBankInfo->dataWidth = pDimmInfo->dataWidth;
+    pBankInfo->errorCheckType = pDimmInfo->errorCheckType;             
+    pBankInfo->sdramWidth = pDimmInfo->sdramWidth;
+    pBankInfo->errorCheckDataWidth = pDimmInfo->errorCheckDataWidth;   
+    pBankInfo->numOfBanksOnEachDevice = pDimmInfo->numOfBanksOnEachDevice;
+    pBankInfo->suportedCasLatencies = pDimmInfo->suportedCasLatencies;
+    pBankInfo->refreshInterval = pDimmInfo->refreshInterval;
+ 
+    /* DIMM timing parameters */
+    pBankInfo->minCycleTimeAtMaxCasLatPs = pDimmInfo->minCycleTimeAtMaxCasLatPs;
+    pBankInfo->minCycleTimeAtMaxCasLatMinus1Ps = 
+                                    pDimmInfo->minCycleTimeAtMaxCasLatMinus1Ps;
+    pBankInfo->minCycleTimeAtMaxCasLatMinus2Ps = 
+                                    pDimmInfo->minCycleTimeAtMaxCasLatMinus2Ps;
+
+    pBankInfo->minRowPrechargeTime     = pDimmInfo->minRowPrechargeTime;     
+    pBankInfo->minRowActiveToRowActive = pDimmInfo->minRowActiveToRowActive;
+    pBankInfo->minRasToCasDelay        = pDimmInfo->minRasToCasDelay;       
+    pBankInfo->minRasPulseWidth        = pDimmInfo->minRasPulseWidth;       
+    pBankInfo->minWriteRecoveryTime    = pDimmInfo->minWriteRecoveryTime;
+    pBankInfo->minWriteToReadCmdDelay  = pDimmInfo->minWriteToReadCmdDelay;
+    pBankInfo->minReadToPrechCmdDelay  = pDimmInfo->minReadToPrechCmdDelay;
+    pBankInfo->minRefreshToActiveCmd   = pDimmInfo->minRefreshToActiveCmd;
+               
+    /* Parameters calculated from the extracted DIMM information */
+    pBankInfo->size = pDimmInfo->size/pDimmInfo->numOfModuleBanks;
+    pBankInfo->deviceDensity = pDimmInfo->deviceDensity;              
+    pBankInfo->numberOfDevices = pDimmInfo->numberOfDevices /
+                                 pDimmInfo->numOfModuleBanks;
+ 
+    /* DIMM attributes (MV_TRUE for yes) */
+
+    if ((pDimmInfo->memoryType == MEM_TYPE_SDRAM) ||
+        (pDimmInfo->memoryType == MEM_TYPE_DDR1)   )
+    {   
+        if (pDimmInfo->dimmAttributes & BIT1)
+            pBankInfo->registeredAddrAndControlInputs = MV_TRUE;
+        else
+            pBankInfo->registeredAddrAndControlInputs = MV_FALSE;
+    }
+    else /* pDimmInfo->memoryType == MEM_TYPE_DDR2 */
+    {
+        if (pDimmInfo->dimmTypeInfo & (BIT0 | BIT4))
+            pBankInfo->registeredAddrAndControlInputs = MV_TRUE;
+        else
+            pBankInfo->registeredAddrAndControlInputs = MV_FALSE;
+    }
+
+    return;
+}
+
+/*******************************************************************************
+* dimmSpdCpy - Cpy SPD parameters from dimm 0 to dimm 1.
+*
+* DESCRIPTION:
+*       Read the DIMM SPD parameters from dimm 0 into dimm 1 SPD.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_TRUE if function could read DIMM parameters, MV_FALSE otherwise.
+*
+*******************************************************************************/
+MV_STATUS dimmSpdCpy(MV_VOID)
+{
+    MV_U32 i;
+    MV_U32 spdChecksum;
+     
+    MV_TWSI_SLAVE twsiSlave;
+    MV_U8 data[SPD_SIZE];
+
+    /* zero dimmInfo structure */
+    memset(data, 0, SPD_SIZE);
+
+    /* read the dimm eeprom */
+    DB(mvOsPrintf("DRAM: Read Dimm eeprom\n"));
+    twsiSlave.slaveAddr.address = MV_BOARD_DIMM0_I2C_ADDR;
+    twsiSlave.slaveAddr.type = ADDR7_BIT;
+    twsiSlave.validOffset = MV_TRUE;
+    twsiSlave.offset = 0;
+    twsiSlave.moreThen256 = MV_FALSE;
+
+    if( MV_OK != mvTwsiRead (MV_BOARD_DIMM_I2C_CHANNEL,
+			&twsiSlave, data, SPD_SIZE) )
+    {
+        DB(mvOsPrintf("DRAM: ERR. no DIMM in dimmNum 0\n"));
+        return MV_FAIL;
+    }
+    DB(puts("DRAM: Reading dimm info succeded.\n"));
+    
+    /* calculate SPD checksum */
+    spdChecksum = 0;
+    
+    for(i = 0 ; i <= 62 ; i++)
+    {
+        spdChecksum += data[i];
+    }
+    
+    if ((spdChecksum & 0xff) != data[63])
+    {
+        DB(mvOsPrintf("DRAM: Warning. Wrong SPD Checksum %2x, expValue=%2x\n",
+                            (MV_U32)(spdChecksum & 0xff), data[63]));
+    }
+    else
+    {
+        DB(mvOsPrintf("DRAM: SPD Checksum ok!\n"));
+    }
+
+    /* copy the SPD content 1:1 into the DIMM 1 SPD */
+    twsiSlave.slaveAddr.address = MV_BOARD_DIMM1_I2C_ADDR;
+    twsiSlave.slaveAddr.type = ADDR7_BIT;
+    twsiSlave.validOffset = MV_TRUE;
+    twsiSlave.offset = 0;
+    twsiSlave.moreThen256 = MV_FALSE;
+
+    for(i = 0 ; i < SPD_SIZE ; i++)
+    {
+	twsiSlave.offset = i;
+	if( MV_OK != mvTwsiWrite (MV_BOARD_DIMM_I2C_CHANNEL,
+	    			&twsiSlave, &data[i], 1) )
+	{
+	    mvOsPrintf("DRAM: ERR. no DIMM in dimmNum 1 byte %d \n",i);
+	    return MV_FAIL;
+	}
+	mvOsDelay(5);
+    }
+    
+    DB(puts("DRAM: Reading dimm info succeded.\n"));
+    return MV_OK;
+}
+
+/*******************************************************************************
+* dimmSpdGet - Get the SPD parameters.
+*
+* DESCRIPTION:
+*       Read the DIMM SPD parameters into given struct parameter.
+*
+* INPUT:
+*       dimmNum - DIMM number. See MV_BOARD_DIMM_NUM enumerator.
+*
+* OUTPUT:
+*       pDimmInfo - DIMM information structure.
+*
+* RETURN:
+*       MV_TRUE if function could read DIMM parameters, MV_FALSE otherwise.
+*
+*******************************************************************************/
+MV_STATUS dimmSpdGet(MV_U32 dimmNum, MV_DIMM_INFO *pDimmInfo)
+{
+    MV_U32 i;
+    MV_U32 density = 1;
+    MV_U32 spdChecksum;
+     
+    MV_TWSI_SLAVE twsiSlave;
+    MV_U8 data[SPD_SIZE];
+
+    if((NULL == pDimmInfo)|| (dimmNum >= MAX_DIMM_NUM))
+    {
+        DB(mvOsPrintf("Dram: mvDramBankInfoGet bad params \n")); 
+        return MV_BAD_PARAM;
+    }
+
+    /* zero dimmInfo structure */
+    memset(data, 0, SPD_SIZE);
+
+    /* read the dimm eeprom */
+    DB(mvOsPrintf("DRAM: Read Dimm eeprom\n"));
+    twsiSlave.slaveAddr.address = (dimmNum == 0) ?
+                            MV_BOARD_DIMM0_I2C_ADDR : MV_BOARD_DIMM1_I2C_ADDR;
+    twsiSlave.slaveAddr.type = ADDR7_BIT;
+    twsiSlave.validOffset = MV_TRUE;
+    twsiSlave.offset = 0;
+    twsiSlave.moreThen256 = MV_FALSE;
+
+    if( MV_OK != mvTwsiRead (MV_BOARD_DIMM_I2C_CHANNEL,
+			&twsiSlave, data, SPD_SIZE) )
+    {
+        DB(mvOsPrintf("DRAM: ERR. no DIMM in dimmNum %d \n", dimmNum));
+        return MV_FAIL;
+    }
+    DB(puts("DRAM: Reading dimm info succeded.\n"));
+    
+    /* calculate SPD checksum */
+    spdChecksum = 0;
+    
+        for(i = 0 ; i <= 62 ; i++)
+        {
+        spdChecksum += data[i];
+    }
+    
+    if ((spdChecksum & 0xff) != data[63])
+    {
+        DB(mvOsPrintf("DRAM: Warning. Wrong SPD Checksum %2x, expValue=%2x\n",
+                            (MV_U32)(spdChecksum & 0xff), data[63]));
+    }
+    else
+    {
+        DB(mvOsPrintf("DRAM: SPD Checksum ok!\n"));
+    }
+
+    /* copy the SPD content 1:1 into the dimmInfo structure*/
+    for(i = 0 ; i < SPD_SIZE ; i++)
+    {
+        pDimmInfo->spdRawData[i] = data[i];
+        DB(mvOsPrintf("SPD-EEPROM Byte %3d = %3x (%3d)\n",i, data[i], data[i]));
+    }
+
+    DB(mvOsPrintf("DRAM SPD Information:\n"));
+
+    /* Memory type (DDR / SDRAM) */
+    switch (data[DIMM_MEM_TYPE])
+    {
+        case (DIMM_MEM_TYPE_SDRAM):
+            pDimmInfo->memoryType = MEM_TYPE_SDRAM;
+            DB(mvOsPrintf("DRAM Memeory type SDRAM\n"));
+            break;
+        case (DIMM_MEM_TYPE_DDR1):
+            pDimmInfo->memoryType = MEM_TYPE_DDR1;
+            DB(mvOsPrintf("DRAM Memeory type DDR1\n"));
+            break;
+        case (DIMM_MEM_TYPE_DDR2):
+            pDimmInfo->memoryType = MEM_TYPE_DDR2;
+            DB(mvOsPrintf("DRAM Memeory type DDR2\n"));
+            break;
+        default:
+            mvOsPrintf("ERROR: Undefined memory type!\n");
+            return MV_ERROR;
+    }
+
+    
+    /* Number Of Row Addresses */
+    pDimmInfo->numOfRowAddr = data[DIMM_ROW_NUM];
+    DB(mvOsPrintf("DRAM numOfRowAddr[3]         %d\n",pDimmInfo->numOfRowAddr));
+        
+    /* Number Of Column Addresses */
+    pDimmInfo->numOfColAddr = data[DIMM_COL_NUM];
+    DB(mvOsPrintf("DRAM numOfColAddr[4]         %d\n",pDimmInfo->numOfColAddr));
+        
+    /* Number Of Module Banks */
+    pDimmInfo->numOfModuleBanks = data[DIMM_MODULE_BANK_NUM];
+    DB(mvOsPrintf("DRAM numOfModuleBanks[5]     0x%x\n", 
+                                                  pDimmInfo->numOfModuleBanks));
+        
+    /* Number of module banks encoded differently for DDR2 */
+    if (pDimmInfo->memoryType == MEM_TYPE_DDR2)
+        pDimmInfo->numOfModuleBanks = (pDimmInfo->numOfModuleBanks & 0x7)+1;
+
+    /* Data Width */
+    pDimmInfo->dataWidth = data[DIMM_DATA_WIDTH];
+    DB(mvOsPrintf("DRAM dataWidth[6]            0x%x\n", pDimmInfo->dataWidth));
+        
+    /* Minimum Cycle Time At Max CasLatancy */
+    pDimmInfo->minCycleTimeAtMaxCasLatPs = cas2ps(data[DIMM_MIN_CC_AT_MAX_CAS]);
+
+    /* Error Check Type */
+    pDimmInfo->errorCheckType = data[DIMM_ERR_CHECK_TYPE];
+    DB(mvOsPrintf("DRAM errorCheckType[11]      0x%x\n", 
+                                                    pDimmInfo->errorCheckType));
+
+    /* Refresh Interval */
+    pDimmInfo->refreshInterval = data[DIMM_REFRESH_INTERVAL];
+    DB(mvOsPrintf("DRAM refreshInterval[12]     0x%x\n", 
+                                                   pDimmInfo->refreshInterval));
+    
+    /* Sdram Width */
+    pDimmInfo->sdramWidth = data[DIMM_SDRAM_WIDTH];
+    DB(mvOsPrintf("DRAM sdramWidth[13]          0x%x\n",pDimmInfo->sdramWidth));
+        
+    /* Error Check Data Width */
+    pDimmInfo->errorCheckDataWidth = data[DIMM_ERR_CHECK_DATA_WIDTH];
+    DB(mvOsPrintf("DRAM errorCheckDataWidth[14] 0x%x\n", 
+                                               pDimmInfo->errorCheckDataWidth));
+    
+    /* Burst Length Supported */
+    /*     SDRAM/DDR1:
+                    *******-******-******-******-******-******-******-******* 
+                    * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * 
+                    *******-******-******-******-******-******-******-******* 
+    burst length =  * Page | TBD  | TBD  | TBD  |  8   |  4   |  2   |   1  * 
+                    *********************************************************/ 
+    /*     DDR2:
+                    *******-******-******-******-******-******-******-******* 
+                    * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * 
+                    *******-******-******-******-******-******-******-******* 
+    burst length =  * Page | TBD  | TBD  | TBD  |  8   |  4   | TBD  | TBD  * 
+                    *********************************************************/ 
+
+    pDimmInfo->burstLengthSupported = data[DIMM_BURST_LEN_SUP];
+    DB(mvOsPrintf("DRAM burstLengthSupported[16] 0x%x\n", 
+                                              pDimmInfo->burstLengthSupported));
+    
+    /* Number Of Banks On Each Device */
+    pDimmInfo->numOfBanksOnEachDevice = data[DIMM_DEV_BANK_NUM];
+    DB(mvOsPrintf("DRAM numOfBanksOnEachDevice[17] 0x%x\n", 
+                                            pDimmInfo->numOfBanksOnEachDevice));
+    
+    /* Suported Cas Latencies */
+                   
+    /*      SDRAM:
+            *******-******-******-******-******-******-******-******* 
+            * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * 
+            *******-******-******-******-******-******-******-******* 
+    CAS =   * TBD  |  7   |  6   |  5   |  4   |  3   |   2  |   1  * 
+            ********************************************************/ 
+
+    /*     DDR 1:
+            *******-******-******-******-******-******-******-******* 
+            * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * 
+            *******-******-******-******-******-******-******-******* 
+    CAS =   * TBD  |  4   | 3.5  |   3  | 2.5  |  2   | 1.5  |   1  * 
+            *********************************************************/
+
+    /*     DDR 2:
+            *******-******-******-******-******-******-******-******* 
+            * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * 
+            *******-******-******-******-******-******-******-******* 
+    CAS =   * TBD  | TBD  |  5   |  4   |  3   |  2   | TBD  | TBD  * 
+            *********************************************************/
+    
+    pDimmInfo->suportedCasLatencies = data[DIMM_SUP_CAL];
+    DB(mvOsPrintf("DRAM suportedCasLatencies[18]    0x%x\n", 
+                                              pDimmInfo->suportedCasLatencies));
+
+    /* For DDR2 only, get the DIMM type information */
+    if (pDimmInfo->memoryType == MEM_TYPE_DDR2)
+    {   
+        pDimmInfo->dimmTypeInfo = data[DIMM_DDR2_TYPE_INFORMATION];
+        DB(mvOsPrintf("DRAM dimmTypeInfo[20] (DDR2) 0x%x\n", 
+                                                      pDimmInfo->dimmTypeInfo));
+    }
+
+    /* SDRAM Modules Attributes */
+    pDimmInfo->dimmAttributes = data[DIMM_BUF_ADDR_CONT_IN];
+    DB(mvOsPrintf("DRAM dimmAttributes[21]          0x%x\n",    
+                                                    pDimmInfo->dimmAttributes));
+    
+    /* Minimum Cycle Time At Max CasLatancy Minus 1*/
+    pDimmInfo->minCycleTimeAtMaxCasLatMinus1Ps = 
+                                    cas2ps(data[DIMM_MIN_CC_AT_MAX_CAS_MINUS1]);
+
+    /* Minimum Cycle Time At Max CasLatancy Minus 2*/
+    pDimmInfo->minCycleTimeAtMaxCasLatMinus2Ps = 
+                                    cas2ps(data[DIMM_MIN_CC_AT_MAX_CAS_MINUS2]);
+
+    pDimmInfo->minRowPrechargeTime = data[DIMM_MIN_ROW_PRECHARGE_TIME];
+    DB(mvOsPrintf("DRAM minRowPrechargeTime[27]     0x%x\n", 
+                                               pDimmInfo->minRowPrechargeTime));
+    pDimmInfo->minRowActiveToRowActive = data[DIMM_MIN_ROW_ACTIVE_TO_ROW_ACTIVE];
+    DB(mvOsPrintf("DRAM minRowActiveToRowActive[28] 0x%x\n", 
+                                           pDimmInfo->minRowActiveToRowActive));
+    pDimmInfo->minRasToCasDelay = data[DIMM_MIN_RAS_TO_CAS_DELAY];
+    DB(mvOsPrintf("DRAM minRasToCasDelay[29]        0x%x\n", 
+                                                  pDimmInfo->minRasToCasDelay));
+    pDimmInfo->minRasPulseWidth = data[DIMM_MIN_RAS_PULSE_WIDTH];
+    DB(mvOsPrintf("DRAM minRasPulseWidth[30]        0x%x\n", 
+                                                  pDimmInfo->minRasPulseWidth));
+        
+    /* DIMM Bank Density */
+    pDimmInfo->dimmBankDensity = data[DIMM_BANK_DENSITY];
+    DB(mvOsPrintf("DRAM dimmBankDensity[31]         0x%x\n", 
+                                                   pDimmInfo->dimmBankDensity));
+
+    /* Only DDR2 includes Write Recovery Time field. Other SDRAM ignore     */
+    pDimmInfo->minWriteRecoveryTime = data[DIMM_MIN_WRITE_RECOVERY_TIME];
+    DB(mvOsPrintf("DRAM minWriteRecoveryTime[36]    0x%x\n", 
+                                              pDimmInfo->minWriteRecoveryTime));
+    
+    /* Only DDR2 includes Internal Write To Read Command Delay field.       */
+    pDimmInfo->minWriteToReadCmdDelay = data[DIMM_MIN_WRITE_TO_READ_CMD_DELAY];
+    DB(mvOsPrintf("DRAM minWriteToReadCmdDelay[37]  0x%x\n", 
+                                            pDimmInfo->minWriteToReadCmdDelay));
+    
+    /* Only DDR2 includes Internal Read To Precharge Command Delay field.   */
+    pDimmInfo->minReadToPrechCmdDelay = data[DIMM_MIN_READ_TO_PRECH_CMD_DELAY];
+    DB(mvOsPrintf("DRAM minReadToPrechCmdDelay[38]  0x%x\n",    
+                                            pDimmInfo->minReadToPrechCmdDelay));
+    
+    /* Only DDR2 includes Minimum Refresh to Activate/Refresh Command field */
+    pDimmInfo->minRefreshToActiveCmd = data[DIMM_MIN_REFRESH_TO_ACTIVATE_CMD];
+    DB(mvOsPrintf("DRAM minRefreshToActiveCmd[42]   0x%x\n", 
+                                             pDimmInfo->minRefreshToActiveCmd));
+                 
+    /* calculating the sdram density. Representing device density from      */
+    /* bit 20 to allow representation of 4GB and above.                     */
+    /* For example, if density is 512Mbit 0x20000000, will be represent in  */
+    /* deviceDensity by 0x20000000 >> 16 --> 0x00000200. Another example    */
+    /* is density 8GB 0x200000000 >> 16 --> 0x00002000.                     */
+    density = (1 << ((pDimmInfo->numOfRowAddr + pDimmInfo->numOfColAddr) - 20));
+    pDimmInfo->deviceDensity = density * 
+                                pDimmInfo->numOfBanksOnEachDevice * 
+                                pDimmInfo->sdramWidth;
+    DB(mvOsPrintf("DRAM deviceDensity           %d\n",pDimmInfo->deviceDensity));
+    
+    /* Number of devices includeing Error correction */
+    pDimmInfo->numberOfDevices = (pDimmInfo->dataWidth/pDimmInfo->sdramWidth) * 
+                                  pDimmInfo->numOfModuleBanks;
+    DB(mvOsPrintf("DRAM numberOfDevices         %d\n",  
+                                                   pDimmInfo->numberOfDevices));
+
+    pDimmInfo->size = 0; 
+
+    /* Note that pDimmInfo->size is in MB units */
+    if (pDimmInfo->memoryType == MEM_TYPE_SDRAM)
+    {
+        if (pDimmInfo->dimmBankDensity & BIT0)
+            pDimmInfo->size += 1024;                /* Equal to 1GB     */
+        else if (pDimmInfo->dimmBankDensity & BIT1)
+            pDimmInfo->size += 8;                   /* Equal to 8MB     */
+        else if (pDimmInfo->dimmBankDensity & BIT2)
+            pDimmInfo->size += 16;                  /* Equal to 16MB    */
+        else if (pDimmInfo->dimmBankDensity & BIT3)
+            pDimmInfo->size += 32;                  /* Equal to 32MB    */
+        else if (pDimmInfo->dimmBankDensity & BIT4)
+            pDimmInfo->size += 64;                  /* Equal to 64MB    */
+        else if (pDimmInfo->dimmBankDensity & BIT5)
+            pDimmInfo->size += 128;                 /* Equal to 128MB   */
+        else if (pDimmInfo->dimmBankDensity & BIT6) 
+            pDimmInfo->size += 256;                 /* Equal to 256MB   */
+        else if (pDimmInfo->dimmBankDensity & BIT7) 
+            pDimmInfo->size += 512;                 /* Equal to 512MB   */
+    }
+    else if (pDimmInfo->memoryType == MEM_TYPE_DDR1)
+    {
+        if (pDimmInfo->dimmBankDensity & BIT0)
+            pDimmInfo->size += 1024;                /* Equal to 1GB     */
+        else if (pDimmInfo->dimmBankDensity & BIT1)
+            pDimmInfo->size += 2048;                /* Equal to 2GB     */
+        else if (pDimmInfo->dimmBankDensity & BIT2)
+            pDimmInfo->size += 16;                  /* Equal to 16MB    */
+        else if (pDimmInfo->dimmBankDensity & BIT3)
+            pDimmInfo->size += 32;                  /* Equal to 32MB    */
+        else if (pDimmInfo->dimmBankDensity & BIT4)
+            pDimmInfo->size += 64;                  /* Equal to 64MB    */
+        else if (pDimmInfo->dimmBankDensity & BIT5)
+            pDimmInfo->size += 128;                 /* Equal to 128MB   */
+        else if (pDimmInfo->dimmBankDensity & BIT6) 
+            pDimmInfo->size += 256;                 /* Equal to 256MB   */
+        else if (pDimmInfo->dimmBankDensity & BIT7) 
+            pDimmInfo->size += 512;                 /* Equal to 512MB   */
+    }
+    else /* if (dimmInfo.memoryType == MEM_TYPE_DDR2) */
+    {
+        if (pDimmInfo->dimmBankDensity & BIT0)
+            pDimmInfo->size += 1024;                /* Equal to 1GB     */
+        else if (pDimmInfo->dimmBankDensity & BIT1)
+            pDimmInfo->size += 2048;                /* Equal to 2GB     */
+        else if (pDimmInfo->dimmBankDensity & BIT2)
+            pDimmInfo->size += 4096;                /* Equal to 4GB     */
+        else if (pDimmInfo->dimmBankDensity & BIT3)
+            pDimmInfo->size += 8192;                /* Equal to 8GB     */
+        else if (pDimmInfo->dimmBankDensity & BIT4)
+            pDimmInfo->size += 16384;               /* Equal to 16GB    */
+        else if (pDimmInfo->dimmBankDensity & BIT5)
+            pDimmInfo->size += 128;                 /* Equal to 128MB   */
+        else if (pDimmInfo->dimmBankDensity & BIT6) 
+            pDimmInfo->size += 256;                 /* Equal to 256MB   */
+        else if (pDimmInfo->dimmBankDensity & BIT7) 
+            pDimmInfo->size += 512;                 /* Equal to 512MB   */
+    }
+    
+    pDimmInfo->size *= pDimmInfo->numOfModuleBanks;
+
+    DB(mvOsPrintf("Dram: dimm size    %dMB \n",pDimmInfo->size));
+
+    return MV_OK;
+}
+
+/*******************************************************************************
+* dimmSpdPrint - Print the SPD parameters.
+*
+* DESCRIPTION:
+*       Print the Dimm SPD parameters.
+*
+* INPUT:
+*       pDimmInfo - DIMM information structure.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+MV_VOID dimmSpdPrint(MV_U32 dimmNum)
+{
+    MV_DIMM_INFO dimmInfo;
+    MV_U32  i, temp = 0;
+    MV_U32  k, maskLeftOfPoint = 0, maskRightOfPoint = 0;
+    MV_U32  rightOfPoint = 0,leftOfPoint = 0, div, time_tmp, shift;
+    MV_U32  busClkPs;
+    MV_U8   trp_clocks=0, trcd_clocks, tras_clocks, trrd_clocks,
+            temp_buf[40], *spdRawData;
+
+    busClkPs = 1000000000 / (mvBoardSysClkGet() / 100);  /* in 10 ps units */
+
+    spdRawData = dimmInfo.spdRawData;
+    
+    if(MV_OK != dimmSpdGet(dimmNum, &dimmInfo))
+    {
+        mvOsOutput("ERROR: Could not read SPD information!\n");
+        return;
+    }
+
+    /* find Manufactura of Dimm Module */
+    mvOsOutput("\nManufacturer's JEDEC ID Code:   ");
+    for(i = 0 ; i < DIMM_MODULE_MANU_SIZE ; i++)
+    {
+        mvOsOutput("%x",spdRawData[DIMM_MODULE_MANU_OFFS + i]);
+    }
+    mvOsOutput("\n");
+
+    /* Manufacturer's Specific Data */
+    for(i = 0 ; i < DIMM_MODULE_ID_SIZE ; i++)
+    {
+        temp_buf[i] = spdRawData[DIMM_MODULE_ID_OFFS + i];
+    }
+    mvOsOutput("Manufacturer's Specific Data:   %s\n", temp_buf);
+
+    /* Module Part Number */
+    for(i = 0 ; i < DIMM_MODULE_VEN_SIZE ; i++)
+    {
+        temp_buf[i] = spdRawData[DIMM_MODULE_VEN_OFFS + i];
+    }
+    mvOsOutput("Module Part Number:             %s\n", temp_buf);
+
+    /* Module Serial Number */
+    for(i = 0; i < sizeof(MV_U32); i++)
+    {
+    	temp |= spdRawData[95+i] << 8*i;
+    }
+    mvOsOutput("DIMM Serial No.                 %ld (%lx)\n", (long)temp, 
+                                    (long)temp);
+
+    /* find Manufac-Data of Dimm Module */
+    mvOsOutput("Manufactoring Date:             Year 20%d%d/ ww %d%d\n", 
+                        ((spdRawData[93] & 0xf0) >> 4), (spdRawData[93] & 0xf), 
+                        ((spdRawData[94] & 0xf0) >> 4), (spdRawData[94] & 0xf)); 
+    /* find modul_revision of Dimm Module */
+    mvOsOutput("Module Revision:                %d.%d\n", 
+                                                spdRawData[91], spdRawData[92]); 
+
+    /* find manufac_place of Dimm Module */
+    mvOsOutput("manufac_place:                  %d\n", spdRawData[72]);
+    
+    /* go over the first 35 I2C data bytes */
+    for(i = 2 ; i <= 35 ; i++)
+       switch(i)
+        {
+            case 2:  /* Memory type (DDR1/2 / SDRAM) */
+                if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+                    mvOsOutput("Dram Type is:                   SDRAM\n");
+                else if (dimmInfo.memoryType == MEM_TYPE_DDR1)
+                    mvOsOutput("Dram Type is:                   SDRAM DDR1\n");
+                else if (dimmInfo.memoryType == MEM_TYPE_DDR2)
+                    mvOsOutput("Dram Type is:                   SDRAM DDR2\n");
+                else
+                    mvOsOutput("Dram Type unknown\n");
+                break;
+/*----------------------------------------------------------------------------*/
+
+            case 3:  /* Number Of Row Addresses */
+                mvOsOutput("Module Number of row addresses: %d\n", 
+                                                        dimmInfo.numOfRowAddr);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 4:  /* Number Of Column Addresses */
+                mvOsOutput("Module Number of col addresses: %d\n", 
+                                                        dimmInfo.numOfColAddr);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 5:  /* Number Of Module Banks */
+                mvOsOutput("Number of Banks on Mod.:        %d\n",  
+                                                    dimmInfo.numOfModuleBanks);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 6:  /* Data Width */
+                mvOsOutput("Module Data Width:              %d bit\n",  
+                                                           dimmInfo.dataWidth);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 8:  /* Voltage Interface */
+                switch(spdRawData[i])
+                {
+                    case 0x0:
+                        mvOsOutput("Module is               TTL_5V_TOLERANT\n");
+                        break;
+                    case 0x1:
+                        mvOsOutput("Module is               LVTTL\n");
+                        break;
+                    case 0x2:
+                        mvOsOutput("Module is               HSTL_1_5V\n");
+                        break;
+                    case 0x3:
+                        mvOsOutput("Module is               SSTL_3_3V\n");
+                        break;
+                    case 0x4:
+                        mvOsOutput("Module is               SSTL_2_5V\n");
+                        break;
+                    case 0x5:
+                        if (dimmInfo.memoryType != MEM_TYPE_SDRAM)
+                        {
+                            mvOsOutput("Module is                 SSTL_1_8V\n");
+                            break;
+                        }
+                    default:
+                        mvOsOutput("Module is               VOLTAGE_UNKNOWN\n");
+                        break;
+                }
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 9:  /* Minimum Cycle Time At Max CasLatancy */
+                leftOfPoint = (spdRawData[i] & 0xf0) >> 4;
+                rightOfPoint = (spdRawData[i] & 0x0f) * 10;
+                
+                /* DDR2 addition of right of point */
+                if ((spdRawData[i] & 0x0f) == 0xA)
+                {
+                    rightOfPoint = 25;
+                }
+                if ((spdRawData[i] & 0x0f) == 0xB)
+                {
+                    rightOfPoint = 33;
+                }
+                if ((spdRawData[i] & 0x0f) == 0xC)
+                {
+                    rightOfPoint = 66;
+                }
+                if ((spdRawData[i] & 0x0f) == 0xD)
+                {
+                    rightOfPoint = 75;
+                }
+                mvOsOutput("Minimum Cycle Time At Max CL:   %d.%d [ns]\n",
+                                                    leftOfPoint, rightOfPoint);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 10: /* Clock To Data Out */
+                div = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 10:100;
+                time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + 
+                                                      ((spdRawData[i] & 0x0f));
+                leftOfPoint     = time_tmp / div;
+                rightOfPoint    = time_tmp % div;
+                mvOsOutput("Clock To Data Out:              %d.%d [ns]\n",
+                                                    leftOfPoint, rightOfPoint);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 11: /* Error Check Type */
+                mvOsOutput("Error Check Type (0=NONE):      %d\n", 
+                                                      dimmInfo.errorCheckType);
+                break;
+/*----------------------------------------------------------------------------*/
+
+            case 12: /* Refresh Interval */
+                mvOsOutput("Refresh Rate:                   %x\n", 
+                                                     dimmInfo.refreshInterval);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 13: /* Sdram Width */
+                mvOsOutput("Sdram Width:                    %d bits\n",     
+                                                          dimmInfo.sdramWidth);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 14: /* Error Check Data Width */
+                mvOsOutput("Error Check Data Width:         %d bits\n", 
+                                                 dimmInfo.errorCheckDataWidth);
+                break;
+/*----------------------------------------------------------------------------*/
+
+           case 15: /* Minimum Clock Delay is unsupported */
+                if ((dimmInfo.memoryType == MEM_TYPE_SDRAM) ||
+                    (dimmInfo.memoryType == MEM_TYPE_DDR1))
+                {
+                    mvOsOutput("Minimum Clk Delay back to back: %d\n", 
+                                                                spdRawData[i]);
+                }
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 16: /* Burst Length Supported */
+    /*     SDRAM/DDR1:
+                    *******-******-******-******-******-******-******-******* 
+                    * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * 
+                    *******-******-******-******-******-******-******-******* 
+    burst length =  * Page | TBD  | TBD  | TBD  |  8   |  4   |  2   |   1  * 
+                    *********************************************************/ 
+    /*     DDR2:
+                    *******-******-******-******-******-******-******-******* 
+                    * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * 
+                    *******-******-******-******-******-******-******-******* 
+    burst length =  * Page | TBD  | TBD  | TBD  |  8   |  4   | TBD  | TBD  * 
+                    *********************************************************/ 
+                mvOsOutput("Burst Length Supported: ");
+                if ((dimmInfo.memoryType == MEM_TYPE_SDRAM) ||
+                    (dimmInfo.memoryType == MEM_TYPE_DDR1))
+                {
+                    if (dimmInfo.burstLengthSupported & BIT0)
+                        mvOsOutput("1, ");
+                    if (dimmInfo.burstLengthSupported & BIT1)
+                        mvOsOutput("2, ");
+                }
+                if (dimmInfo.burstLengthSupported & BIT2)
+                    mvOsOutput("4, ");
+                if (dimmInfo.burstLengthSupported & BIT3) 
+                    mvOsOutput("8, ");
+                
+                mvOsOutput(" Bit \n");
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 17: /* Number Of Banks On Each Device */
+                mvOsOutput("Number Of Banks On Each Chip:   %d\n",  
+                                              dimmInfo.numOfBanksOnEachDevice);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 18: /* Suported Cas Latencies */
+                   
+            /*      SDRAM:
+                    *******-******-******-******-******-******-******-******* 
+                    * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * 
+                    *******-******-******-******-******-******-******-******* 
+            CAS =   * TBD  |  7   |  6   |  5   |  4   |  3   |   2  |   1  * 
+                    ********************************************************/ 
+
+            /*     DDR 1:
+                    *******-******-******-******-******-******-******-******* 
+                    * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * 
+                    *******-******-******-******-******-******-******-******* 
+            CAS =   * TBD  |  4   | 3.5  |   3  | 2.5  |  2   | 1.5  |   1  * 
+                    *********************************************************/
+
+            /*     DDR 2:
+                    *******-******-******-******-******-******-******-******* 
+                    * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * 
+                    *******-******-******-******-******-******-******-******* 
+            CAS =   * TBD  | TBD  |  5   |  4   |  3   |  2   | TBD  | TBD  * 
+                    *********************************************************/
+
+                mvOsOutput("Suported Cas Latencies: (CL) 			");
+                if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+                {
+                    for (k = 0; k <=7; k++)
+                    {
+                        if (dimmInfo.suportedCasLatencies & (1 << k))
+                            mvOsOutput("%d,             ", k+1);
+                    }
+                }
+                else if (dimmInfo.memoryType == MEM_TYPE_DDR1)
+                {
+                    if (dimmInfo.suportedCasLatencies & BIT0)
+                        mvOsOutput("1, ");
+                    if (dimmInfo.suportedCasLatencies & BIT1)
+                        mvOsOutput("1.5, ");
+                    if (dimmInfo.suportedCasLatencies & BIT2)
+                        mvOsOutput("2, ");
+                    if (dimmInfo.suportedCasLatencies & BIT3)
+                        mvOsOutput("2.5, ");
+                    if (dimmInfo.suportedCasLatencies & BIT4)
+                        mvOsOutput("3, ");
+                    if (dimmInfo.suportedCasLatencies & BIT5)
+                        mvOsOutput("3.5, ");
+                }
+                else if (dimmInfo.memoryType == MEM_TYPE_DDR2)
+                {
+                    if (dimmInfo.suportedCasLatencies & BIT2)
+                        mvOsOutput("2, ");
+                    if (dimmInfo.suportedCasLatencies & BIT3)
+                        mvOsOutput("3, ");
+                    if (dimmInfo.suportedCasLatencies & BIT4)
+                        mvOsOutput("4, ");
+                    if (dimmInfo.suportedCasLatencies & BIT5)
+                        mvOsOutput("5, ");		
+                }
+                else
+                    mvOsOutput("?.?, ");		
+                mvOsOutput("\n");
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 20:   /* DDR2 DIMM type info */
+                if (dimmInfo.memoryType == MEM_TYPE_DDR2)
+                {
+                    if (dimmInfo.dimmTypeInfo & (BIT0 | BIT4))
+                        mvOsOutput("Registered DIMM (RDIMM)\n");
+                    else if (dimmInfo.dimmTypeInfo & (BIT1 | BIT5))
+                        mvOsOutput("Unbuffered DIMM (UDIMM)\n");
+                    else 
+                        mvOsOutput("Unknown DIMM type.\n");
+                }
+
+                break;
+/*----------------------------------------------------------------------------*/
+   
+            case 21: /* SDRAM Modules Attributes */
+                mvOsOutput("\nModule Attributes (SPD Byte 21): \n");
+                
+                if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+                {
+                    if (dimmInfo.dimmAttributes & BIT0)
+                        mvOsOutput(" Buffered Addr/Control Input:   Yes\n");
+                    else
+                        mvOsOutput(" Buffered Addr/Control Input:   No\n");
+
+                    if (dimmInfo.dimmAttributes & BIT1)
+                        mvOsOutput(" Registered Addr/Control Input: Yes\n");
+                    else
+                        mvOsOutput(" Registered Addr/Control Input: No\n");
+   
+                    if (dimmInfo.dimmAttributes & BIT2)
+                        mvOsOutput(" On-Card PLL (clock):           Yes \n");
+                    else
+                        mvOsOutput(" On-Card PLL (clock):           No \n");
+
+                    if (dimmInfo.dimmAttributes & BIT3)
+                        mvOsOutput(" Bufferd DQMB Input:            Yes \n");
+                    else
+                        mvOsOutput(" Bufferd DQMB Inputs:           No \n");
+   
+                    if (dimmInfo.dimmAttributes & BIT4)
+                        mvOsOutput(" Registered DQMB Inputs:        Yes \n");
+                    else
+                        mvOsOutput(" Registered DQMB Inputs:        No \n");
+ 
+                    if (dimmInfo.dimmAttributes & BIT5)
+                        mvOsOutput(" Differential Clock Input:      Yes \n");
+                    else
+                        mvOsOutput(" Differential Clock Input:      No \n");
+   
+                    if (dimmInfo.dimmAttributes & BIT6)
+                        mvOsOutput(" redundant Row Addressing:      Yes \n");
+                    else
+                        mvOsOutput(" redundant Row Addressing:      No \n");
+                }
+                else if (dimmInfo.memoryType == MEM_TYPE_DDR1)
+                {
+                    if (dimmInfo.dimmAttributes & BIT0)
+                        mvOsOutput(" Buffered Addr/Control Input:   Yes\n");
+                    else 
+                        mvOsOutput(" Buffered Addr/Control Input:   No\n");
+   
+                    if (dimmInfo.dimmAttributes & BIT1)
+                        mvOsOutput(" Registered Addr/Control Input: Yes\n");
+                    else
+                        mvOsOutput(" Registered Addr/Control Input: No\n");
+   
+                    if (dimmInfo.dimmAttributes & BIT2)
+                        mvOsOutput(" On-Card PLL (clock):           Yes \n");
+                    else
+                        mvOsOutput(" On-Card PLL (clock):           No \n");
+            
+                    if (dimmInfo.dimmAttributes & BIT3)
+                        mvOsOutput(" FET Switch On-Card Enabled:    Yes \n");
+                    else
+                        mvOsOutput(" FET Switch On-Card Enabled:    No \n");
+                    
+                    if (dimmInfo.dimmAttributes & BIT4)
+                        mvOsOutput(" FET Switch External Enabled:   Yes \n");
+                    else
+                        mvOsOutput(" FET Switch External Enabled:   No \n");
+
+                    if (dimmInfo.dimmAttributes & BIT5)
+                        mvOsOutput(" Differential Clock Input:      Yes \n");
+                    else
+                        mvOsOutput(" Differential Clock Input:      No \n");
+                }
+                else /* if (dimmInfo.memoryType == MEM_TYPE_DDR2) */
+                {
+                    mvOsOutput(" Number of Active Registers on the DIMM: %d\n", 
+                                        (dimmInfo.dimmAttributes & 0x3) + 1);
+            
+                    mvOsOutput(" Number of PLLs on the DIMM: %d\n", 
+                                      ((dimmInfo.dimmAttributes) >> 2) & 0x3);
+               
+                    if (dimmInfo.dimmAttributes & BIT4)
+                        mvOsOutput(" FET Switch External Enabled:   Yes \n");
+                    else
+                        mvOsOutput(" FET Switch External Enabled:   No \n");
+
+                    if (dimmInfo.dimmAttributes & BIT6)
+                        mvOsOutput(" Analysis probe installed:      Yes \n");
+                    else
+                        mvOsOutput(" Analysis probe installed:      No \n");
+                }
+                
+                break;
+/*----------------------------------------------------------------------------*/
+
+            case 22: /* Suported AutoPreCharge */
+                mvOsOutput("\nModul Attributes (SPD Byte 22): \n");
+                if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+                {
+                    if ( spdRawData[i] & BIT0 )
+                        mvOsOutput(" Early Ras Precharge:           Yes \n");
+                    else
+                        mvOsOutput(" Early Ras Precharge:           No \n");
+                                                        
+                    if ( spdRawData[i] & BIT1 )                 
+                        mvOsOutput(" AutoPreCharge:                 Yes \n");
+                    else
+                        mvOsOutput(" AutoPreCharge:                 No \n");
+                                                            
+                    if ( spdRawData[i] & BIT2 )                 
+                        mvOsOutput(" Precharge All:                 Yes \n");
+                    else
+                        mvOsOutput(" Precharge All:                 No \n");
+                                                        
+                    if ( spdRawData[i] & BIT3 )                 
+                        mvOsOutput(" Write 1/ReadBurst:             Yes \n");
+                    else
+                        mvOsOutput(" Write 1/ReadBurst:             No \n");
+                                                        
+                    if ( spdRawData[i] & BIT4 )                 
+                        mvOsOutput(" lower VCC tolerance:           5%%\n");
+                    else
+                        mvOsOutput(" lower VCC tolerance:           10%%\n");
+                                                        
+                    if ( spdRawData[i] & BIT5 )                 
+                        mvOsOutput(" upper VCC tolerance:           5%%\n");
+                    else
+                        mvOsOutput(" upper VCC tolerance:           10%%\n");
+                }
+                else if (dimmInfo.memoryType == MEM_TYPE_DDR1)
+                {
+                    if ( spdRawData[i] & BIT0 )
+                        mvOsOutput(" Supports Weak Driver:          Yes \n");
+                    else
+                        mvOsOutput(" Supports Weak Driver:          No \n");
+
+                    if ( !(spdRawData[i] & BIT4) )
+                        mvOsOutput(" lower VCC tolerance:           0.2V\n");
+   
+                    if ( !(spdRawData[i] & BIT5) )
+                        mvOsOutput(" upper VCC tolerance:           0.2V\n");
+
+                    if ( spdRawData[i] & BIT6 )
+                        mvOsOutput(" Concurrent Auto Preharge:      Yes \n");
+                    else
+                        mvOsOutput(" Concurrent Auto Preharge:      No \n");
+
+                    if ( spdRawData[i] & BIT7 )
+                        mvOsOutput(" Supports Fast AP:              Yes \n");
+                    else
+                        mvOsOutput(" Supports Fast AP:              No \n");
+                }
+                else if (dimmInfo.memoryType == MEM_TYPE_DDR2)
+                {
+                    if ( spdRawData[i] & BIT0 )
+                        mvOsOutput(" Supports Weak Driver:          Yes \n");
+                    else
+                        mvOsOutput(" Supports Weak Driver:          No \n");
+                }
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 23:
+            /* Minimum Cycle Time At Maximum Cas Latancy Minus 1 (2nd highest CL) */
+                leftOfPoint = (spdRawData[i] & 0xf0) >> 4;
+                rightOfPoint = (spdRawData[i] & 0x0f) * 10;
+                
+                /* DDR2 addition of right of point */
+                if ((spdRawData[i] & 0x0f) == 0xA)
+                {
+                    rightOfPoint = 25;
+                }
+                if ((spdRawData[i] & 0x0f) == 0xB)
+                {
+                    rightOfPoint = 33;
+                }
+                if ((spdRawData[i] & 0x0f) == 0xC)
+                {
+                    rightOfPoint = 66;
+                }
+                if ((spdRawData[i] & 0x0f) == 0xD)
+                {
+                    rightOfPoint = 75;
+                }
+
+                mvOsOutput("Minimum Cycle Time At 2nd highest CasLatancy"
+                           "(0 = Not supported): %d.%d [ns]\n",
+                           leftOfPoint, rightOfPoint );
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 24: /* Clock To Data Out 2nd highest Cas Latency Value*/
+                div = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? 10:100;
+                time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + 
+                                                    ((spdRawData[i] & 0x0f));
+                leftOfPoint     = time_tmp / div;
+                rightOfPoint    = time_tmp % div;
+                mvOsOutput("Clock To Data Out (2nd CL value): 		%d.%d [ns]\n",
+                                                    leftOfPoint, rightOfPoint);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 25: 
+            /* Minimum Cycle Time At Maximum Cas Latancy Minus 2 (3rd highest CL) */
+                if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+                {
+                    leftOfPoint = (spdRawData[i] & 0xfc) >> 2;
+                    rightOfPoint = (spdRawData[i] & 0x3) * 25;
+                }
+                else    /* DDR1 or DDR2 */ 
+                {
+                    leftOfPoint = (spdRawData[i] & 0xf0) >> 4;
+                    rightOfPoint = (spdRawData[i] & 0x0f) * 10;
+                    
+                    /* DDR2 addition of right of point */
+                    if ((spdRawData[i] & 0x0f) == 0xA)
+                    {
+                        rightOfPoint = 25;
+                    }
+                    if ((spdRawData[i] & 0x0f) == 0xB)
+                    {
+                        rightOfPoint = 33;
+                    }
+                    if ((spdRawData[i] & 0x0f) == 0xC)
+                    {
+                        rightOfPoint = 66;
+                    }
+                    if ((spdRawData[i] & 0x0f) == 0xD)
+                    {
+                        rightOfPoint = 75;
+                    }
+                }
+                mvOsOutput("Minimum Cycle Time At 3rd highest CasLatancy" 
+                           "(0 = Not supported): %d.%d [ns]\n",
+                           leftOfPoint, rightOfPoint );
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 26: /* Clock To Data Out 3rd highest Cas Latency Value*/
+                if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+                {
+                    leftOfPoint = (spdRawData[i] & 0xfc) >> 2;
+                    rightOfPoint = (spdRawData[i] & 0x3) * 25;
+                }
+                else    /* DDR1 or DDR2 */ 
+                {
+                    time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + 
+                                                      ((spdRawData[i] & 0x0f));
+                    leftOfPoint     = 0;
+                    rightOfPoint    = time_tmp;
+                }
+                mvOsOutput("Clock To Data Out (3rd CL value): 		%d.%2d[ns]\n",
+                                                  leftOfPoint, rightOfPoint );
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 27: /* Minimum Row Precharge Time */
+                shift = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 0:2;
+                maskLeftOfPoint  = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? 
+                                                                    0xff : 0xfc;
+                maskRightOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? 
+                                                                    0x00 : 0x03;
+                leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> shift);
+                rightOfPoint = (spdRawData[i] & maskRightOfPoint)*25;
+                temp = ((leftOfPoint*100) + rightOfPoint);/* in 10ps Intervals*/
+                trp_clocks = (temp + (busClkPs-1)) /  busClkPs;    
+                mvOsOutput("Minimum Row Precharge Time [ns]: 		%d.%d = " 
+                           "in Clk cycles %d\n", 
+                           leftOfPoint, rightOfPoint, trp_clocks);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 28: /* Minimum Row Active to Row Active Time */
+                shift = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 0:2;
+                maskLeftOfPoint  = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? 
+                                                                    0xff : 0xfc;
+                maskRightOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? 
+                                                                    0x00 : 0x03;
+                leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> shift);
+                rightOfPoint = (spdRawData[i] & maskRightOfPoint)*25;
+                temp = ((leftOfPoint*100) + rightOfPoint);/* in 100ns Interval*/
+                trrd_clocks = (temp + (busClkPs-1)) / busClkPs;
+                mvOsOutput("Minimum Row Active -To- Row Active Delay [ns]: " 
+                           "%d.%d = in Clk cycles %d\n",
+                            leftOfPoint, rightOfPoint, trp_clocks);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 29: /* Minimum Ras-To-Cas Delay */
+                shift = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 0:2;
+                maskLeftOfPoint  = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? 
+                                                                    0xff : 0xfc;
+                maskRightOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? 
+                                                                    0x00 : 0x03;
+                leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> shift);
+                rightOfPoint = (spdRawData[i] & maskRightOfPoint)*25;  
+                temp = ((leftOfPoint*100) + rightOfPoint);/* in 100ns Interval*/
+                trcd_clocks = (temp + (busClkPs-1) )/ busClkPs;
+                mvOsOutput("Minimum Ras-To-Cas Delay [ns]: 			%d.%d = "
+                           "in Clk cycles %d\n", 
+                           leftOfPoint, rightOfPoint, trp_clocks);
+                break;
+/*----------------------------------------------------------------------------*/
+   
+            case 30: /* Minimum Ras Pulse Width */
+                tras_clocks = (cas2ps(spdRawData[i])+(busClkPs-1)) / busClkPs;
+                mvOsOutput("Minimum Ras Pulse Width [ns]: 			%d = "
+                           "in Clk cycles %d\n", spdRawData[i], tras_clocks);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 31: /* Module Bank Density */
+                mvOsOutput("Module Bank Density (more than 1= Multisize-Module):");
+
+                if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+                {
+                    if (dimmInfo.dimmBankDensity & BIT0)
+                        mvOsOutput("1GB, ");
+                    if (dimmInfo.dimmBankDensity & BIT1)
+                        mvOsOutput("8MB, ");
+                    if (dimmInfo.dimmBankDensity & BIT2)
+                        mvOsOutput("16MB, ");
+                    if (dimmInfo.dimmBankDensity & BIT3)
+                        mvOsOutput("32MB, ");
+                    if (dimmInfo.dimmBankDensity & BIT4)
+                        mvOsOutput("64MB, ");
+                    if (dimmInfo.dimmBankDensity & BIT5)
+                        mvOsOutput("128MB, ");
+                    if (dimmInfo.dimmBankDensity & BIT6) 
+                        mvOsOutput("256MB, ");
+                    if (dimmInfo.dimmBankDensity & BIT7) 
+                        mvOsOutput("512MB, ");
+                }
+                else if (dimmInfo.memoryType == MEM_TYPE_DDR1)
+                {
+                    if (dimmInfo.dimmBankDensity & BIT0)
+                        mvOsOutput("1GB, ");
+                    if (dimmInfo.dimmBankDensity & BIT1)
+                        mvOsOutput("2GB, ");
+                    if (dimmInfo.dimmBankDensity & BIT2)
+                        mvOsOutput("16MB, ");
+                    if (dimmInfo.dimmBankDensity & BIT3)
+                        mvOsOutput("32MB, ");
+                    if (dimmInfo.dimmBankDensity & BIT4)
+                        mvOsOutput("64MB, ");
+                    if (dimmInfo.dimmBankDensity & BIT5)
+                        mvOsOutput("128MB, ");
+                    if (dimmInfo.dimmBankDensity & BIT6) 
+                        mvOsOutput("256MB, ");
+                    if (dimmInfo.dimmBankDensity & BIT7) 
+                        mvOsOutput("512MB, ");
+                }
+                else /* if (dimmInfo.memoryType == MEM_TYPE_DDR2) */
+                {
+                    if (dimmInfo.dimmBankDensity & BIT0)
+                        mvOsOutput("1GB, ");
+                    if (dimmInfo.dimmBankDensity & BIT1)
+                        mvOsOutput("2GB, ");
+                    if (dimmInfo.dimmBankDensity & BIT2)
+                        mvOsOutput("4GB, ");
+                    if (dimmInfo.dimmBankDensity & BIT3)
+                        mvOsOutput("8GB, ");
+                    if (dimmInfo.dimmBankDensity & BIT4)
+                        mvOsOutput("16GB, ");
+                    if (dimmInfo.dimmBankDensity & BIT5)
+                    mvOsOutput("128MB, ");
+                        if (dimmInfo.dimmBankDensity & BIT6) 
+                    mvOsOutput("256MB, ");
+                        if (dimmInfo.dimmBankDensity & BIT7) 
+                    mvOsOutput("512MB, ");
+                }
+                mvOsOutput("\n");
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 32: /* Address And Command Setup Time (measured in ns/1000) */
+                if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+                {
+                    rightOfPoint = (spdRawData[i] & 0x0f);
+                    leftOfPoint  = (spdRawData[i] & 0xf0) >> 4;
+                    if(leftOfPoint > 7)
+                    {
+                    leftOfPoint *= -1;
+                    }
+                }
+                else /* DDR1 or DDR2 */
+                {
+                    time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + 
+                                                      ((spdRawData[i] & 0x0f));
+                    leftOfPoint = time_tmp / 100;
+                    rightOfPoint = time_tmp % 100; 
+                }
+                mvOsOutput("Address And Command Setup Time [ns]: 		%d.%d\n",
+                                                     leftOfPoint, rightOfPoint);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 33: /* Address And Command Hold Time */
+                if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+                {
+                    rightOfPoint = (spdRawData[i] & 0x0f);
+                    leftOfPoint  = (spdRawData[i] & 0xf0) >> 4;
+                    if(leftOfPoint > 7)
+                    {
+                    leftOfPoint *= -1;
+                    }
+                }
+                else /* DDR1 or DDR2 */
+                {
+                    time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + 
+                                                      ((spdRawData[i] & 0x0f));
+                    leftOfPoint = time_tmp / 100;
+                    rightOfPoint = time_tmp % 100;                 
+                }
+                mvOsOutput("Address And Command Hold Time [ns]: 		%d.%d\n",
+                                                   leftOfPoint, rightOfPoint);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 34: /* Data Input Setup Time */
+                if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+                {
+                    rightOfPoint = (spdRawData[i] & 0x0f);
+                    leftOfPoint  = (spdRawData[i] & 0xf0) >> 4;
+                    if(leftOfPoint > 7)
+                    {
+                        leftOfPoint *= -1;
+                    }
+                }
+                else /* DDR1 or DDR2 */
+                {
+                    time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + 
+                                                      ((spdRawData[i] & 0x0f));
+                    leftOfPoint = time_tmp / 100;
+                    rightOfPoint = time_tmp % 100;                 
+                }
+                mvOsOutput("Data Input Setup Time [ns]: 			%d.%d\n", 
+                                                    leftOfPoint, rightOfPoint);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 35: /* Data Input Hold Time */
+                if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+                {
+                    rightOfPoint = (spdRawData[i] & 0x0f);
+                    leftOfPoint  = (spdRawData[i] & 0xf0) >> 4;
+                    if(leftOfPoint > 7)
+                    {
+                        leftOfPoint *= -1;
+                    }
+                }
+                else /* DDR1 or DDR2 */
+                {
+                    time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + 
+                                                      ((spdRawData[i] & 0x0f));
+                    leftOfPoint = time_tmp / 100;
+                    rightOfPoint = time_tmp % 100;                 
+                }
+                mvOsOutput("Data Input Hold Time [ns]: 			%d.%d\n\n", 
+                                                    leftOfPoint, rightOfPoint);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 36: /* Relevant for DDR2 only: Write Recovery Time */
+                leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> 2);
+                rightOfPoint = (spdRawData[i] & maskRightOfPoint) * 25;  
+                mvOsOutput("Write Recovery Time [ns]: 			%d.%d\n", 
+                                                    leftOfPoint, rightOfPoint);
+                break;
+/*----------------------------------------------------------------------------*/
+        }
+    
+}
+
+
+/*
+ * translate ns.ns/10 coding of SPD timing values
+ * into ps unit values
+ */
+/*******************************************************************************
+*  cas2ps - Translate x.y ns parameter to pico-seconds values
+*
+* DESCRIPTION:
+*       This function translates x.y nano seconds to its value in pico seconds.
+*       For example 3.75ns will return 3750.
+*
+* INPUT:
+*       spd_byte - DIMM SPD byte.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       value in pico seconds.
+*
+*******************************************************************************/
+static MV_U32  cas2ps(MV_U8 spd_byte)
+{
+    MV_U32 ns, ns10;
+    
+    /* isolate upper nibble */
+    ns = (spd_byte >> 4) & 0x0F;
+    /* isolate lower nibble */
+    ns10 = (spd_byte & 0x0F);
+    
+    if( ns10 < 10 ) {
+        ns10 *= 10;
+    }
+    else if( ns10 == 10 )
+        ns10 = 25;
+    else if( ns10 == 11 )
+        ns10 = 33;
+    else if( ns10 == 12 )
+        ns10 = 66;
+    else if( ns10 == 13 )
+        ns10 = 75;
+    else 
+    {
+        mvOsOutput("cas2ps Err. unsupported cycle time.\n");
+    }
+    
+    return (ns*1000 + ns10*10);
+}
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDram.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDram.h
new file mode 100644
index 0000000000..678e22456d
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDram.h
@@ -0,0 +1,191 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvDram
+#define __INCmvDram
+
+#include "ddr1_2/mvDramIf.h"
+#include "twsi/mvTwsi.h"
+
+#define MAX_DIMM_NUM 			2
+#define SPD_SIZE			128
+
+/* Dimm spd offsets */
+#define DIMM_MEM_TYPE 						2
+#define DIMM_ROW_NUM 						3
+#define DIMM_COL_NUM 						4
+#define DIMM_MODULE_BANK_NUM 				5
+#define DIMM_DATA_WIDTH 					6
+#define DIMM_VOLT_IF 						8
+#define DIMM_MIN_CC_AT_MAX_CAS 				9
+#define DIMM_ERR_CHECK_TYPE 				11
+#define DIMM_REFRESH_INTERVAL 				12
+#define DIMM_SDRAM_WIDTH 					13
+#define DIMM_ERR_CHECK_DATA_WIDTH 			14
+#define DIMM_MIN_CLK_DEL 					15
+#define DIMM_BURST_LEN_SUP 					16
+#define DIMM_DEV_BANK_NUM 					17
+#define DIMM_SUP_CAL 						18
+#define DIMM_DDR2_TYPE_INFORMATION          20      /* DDR2 only */
+#define DIMM_BUF_ADDR_CONT_IN 				21
+#define DIMM_MIN_CC_AT_MAX_CAS_MINUS1		23
+#define DIMM_MIN_CC_AT_MAX_CAS_MINUS2		25
+#define DIMM_MIN_ROW_PRECHARGE_TIME			27
+#define DIMM_MIN_ROW_ACTIVE_TO_ROW_ACTIVE	28
+#define DIMM_MIN_RAS_TO_CAS_DELAY			29
+#define DIMM_MIN_RAS_PULSE_WIDTH			30
+#define DIMM_BANK_DENSITY					31
+#define DIMM_MIN_WRITE_RECOVERY_TIME        36
+#define DIMM_MIN_WRITE_TO_READ_CMD_DELAY    37
+#define DIMM_MIN_READ_TO_PRECH_CMD_DELAY    38
+#define DIMM_MIN_REFRESH_TO_ACTIVATE_CMD    42
+
+/* Dimm Memory Type values */
+#define DIMM_MEM_TYPE_SDRAM					0x4
+#define DIMM_MEM_TYPE_DDR1 					0x7
+#define DIMM_MEM_TYPE_DDR2 					0x8
+        
+#define DIMM_MODULE_MANU_OFFS 		64
+#define DIMM_MODULE_MANU_SIZE 		8
+#define DIMM_MODULE_VEN_OFFS 		73 
+#define DIMM_MODULE_VEN_SIZE 		25
+#define DIMM_MODULE_ID_OFFS 		99
+#define DIMM_MODULE_ID_SIZE 		18
+
+/* enumeration for voltage levels. */
+typedef enum _mvDimmVoltageIf
+{
+    TTL_5V_TOLERANT, 
+    LVTTL, 
+    HSTL_1_5V, 
+    SSTL_3_3V, 
+    SSTL_2_5V, 
+    VOLTAGE_UNKNOWN, 
+} MV_DIMM_VOLTAGE_IF;
+
+
+/* enumaration for SDRAM CAS Latencies. */
+typedef enum _mvDimmSdramCas
+{
+    SD_CL_1 =1,  
+    SD_CL_2,  
+    SD_CL_3, 
+    SD_CL_4, 
+    SD_CL_5, 
+    SD_CL_6, 
+    SD_CL_7, 
+    SD_FAULT
+}MV_DIMM_SDRAM_CAS;
+
+
+/* DIMM information structure */                                                    
+typedef struct _mvDimmInfo
+{
+    MV_MEMORY_TYPE  memoryType; 	/* DDR or SDRAM */
+
+    MV_U8       spdRawData[SPD_SIZE];  	/* Content of SPD-EEPROM copied 1:1  */
+
+    /* DIMM dimensions */
+    MV_U32  numOfRowAddr;
+    MV_U32  numOfColAddr;
+    MV_U32  numOfModuleBanks;
+    MV_U32  dataWidth;
+    MV_U32  errorCheckType;             /* ECC , PARITY..*/
+    MV_U32  sdramWidth;                 /* 4,8,16 or 32 */
+    MV_U32  errorCheckDataWidth;        /* 0 - no, 1 - Yes */
+    MV_U32  burstLengthSupported;
+    MV_U32  numOfBanksOnEachDevice;
+    MV_U32  suportedCasLatencies;
+    MV_U32  refreshInterval;
+    MV_U32  dimmBankDensity;
+    MV_U32  dimmTypeInfo;           /* DDR2 only */
+    MV_U32  dimmAttributes;
+
+    /* DIMM timing parameters */
+    MV_U32  minCycleTimeAtMaxCasLatPs;	
+    MV_U32  minCycleTimeAtMaxCasLatMinus1Ps;
+    MV_U32  minCycleTimeAtMaxCasLatMinus2Ps;
+	MV_U32  minRowPrechargeTime;
+	MV_U32  minRowActiveToRowActive;
+	MV_U32  minRasToCasDelay;
+	MV_U32  minRasPulseWidth;
+    MV_U32  minWriteRecoveryTime;   /* DDR2 only */
+    MV_U32  minWriteToReadCmdDelay; /* DDR2 only */
+    MV_U32  minReadToPrechCmdDelay; /* DDR2 only */
+    MV_U32  minRefreshToActiveCmd;  /* DDR2 only */
+
+    /* Parameters calculated from the extracted DIMM information */
+    MV_U32  size;               /* 16,64,128,256 or 512 MByte in MB units */
+    MV_U32  deviceDensity;      /* 16,64,128,256 or 512 Mbit in MB units  */
+    MV_U32  numberOfDevices;
+
+} MV_DIMM_INFO;
+
+
+MV_STATUS mvDramBankInfoGet(MV_U32 bankNum, MV_DRAM_BANK_INFO *pBankInfo);
+MV_STATUS dimmSpdGet(MV_U32 dimmNum, MV_DIMM_INFO *pDimmInfo);
+MV_VOID dimmSpdPrint(MV_U32 dimmNum);
+MV_STATUS dimmSpdCpy(MV_VOID);
+
+#endif /* __INCmvDram */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIf.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIf.c
new file mode 100644
index 0000000000..12fb26ad0e
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIf.c
@@ -0,0 +1,1599 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+/* includes */
+#include "ddr1_2/mvDramIf.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+
+
+
+#ifdef MV_DEBUG
+#define DB(x) x
+#else
+#define DB(x)
+#endif
+
+/* DRAM bank presence encoding */
+#define BANK_PRESENT_CS0				0x1
+#define BANK_PRESENT_CS0_CS1			0x3
+#define BANK_PRESENT_CS0_CS2			0x5
+#define BANK_PRESENT_CS0_CS1_CS2		0x7
+#define BANK_PRESENT_CS0_CS2_CS3		0xd
+#define BANK_PRESENT_CS0_CS2_CS3_CS4	0xf
+
+/* locals   */
+static MV_BOOL sdramIfWinOverlap(MV_TARGET target, MV_ADDR_WIN *pAddrWin);
+#if defined(MV_INC_BOARD_DDIM)
+static void sdramDDr2OdtConfig(MV_DRAM_BANK_INFO *pBankInfo);
+static MV_U32 dunitCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 minCas);
+static MV_U32 sdramModeRegCalc(MV_U32 minCas);
+static MV_U32 sdramExtModeRegCalc(MV_DRAM_BANK_INFO *pBankInfo);
+static MV_U32 sdramAddrCtrlRegCalc(MV_DRAM_BANK_INFO *pBankInfo);
+static MV_U32 sdramConfigRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk);
+static MV_U32 minCasCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk, 
+						 MV_U32 forcedCl);
+static MV_U32 sdramTimeCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo, 
+									  MV_U32 minCas, MV_U32 busClk);
+static MV_U32 sdramTimeCtrlHighRegCalc(MV_DRAM_BANK_INFO *pBankInfo, 
+									   MV_U32 busClk);
+
+/*******************************************************************************
+* mvDramIfDetect - Prepare DRAM interface configuration values.
+*
+* DESCRIPTION:
+*       This function implements the full DRAM detection and timing 
+*       configuration for best system performance.
+*       Since this routine runs from a ROM device (Boot Flash), its stack 
+*       resides on RAM, that might be the system DRAM. Changing DRAM 
+*       configuration values while keeping vital data in DRAM is risky. That
+*       is why the function does not preform the configuration setting but 
+*       prepare those in predefined 32bit registers (in this case IDMA 
+*       registers are used) for other routine to perform the settings.
+*       The function will call for board DRAM SPD information for each DRAM 
+*       chip select. The function will then analyze those SPD parameters of 
+*       all DRAM banks in order to decide on DRAM configuration compatible 
+*       for all DRAM banks.
+*       The function will set the CPU DRAM address decode registers.
+*       Note: This routine prepares values that will overide configuration of
+*       mvDramBasicAsmInit().
+*       
+* INPUT:
+*       forcedCl - Forced CAL Latency. If equal to zero, do not force.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+MV_STATUS mvDramIfDetect(MV_U32 forcedCl)
+{
+	MV_U32 retVal = MV_OK;	/* return value */
+	MV_DRAM_BANK_INFO bankInfo[MV_DRAM_MAX_CS];
+	MV_U32  busClk, size, base = 0, i, temp, deviceW, dimmW;
+	MV_U8	minCas;
+	MV_DRAM_DEC_WIN dramDecWin;
+
+	dramDecWin.addrWin.baseHigh = 0;
+
+	busClk = mvBoardSysClkGet();
+	
+	if (0 == busClk)
+	{
+		mvOsPrintf("Dram: ERR. Can't detect system clock! \n");
+		return MV_ERROR;
+	}
+	
+	/* Close DRAM banks except bank 0 (in case code is excecuting from it...) */
+#if defined(MV_INCLUDE_SDRAM_CS1)
+	for(i= SDRAM_CS1; i < MV_DRAM_MAX_CS; i++)
+		mvCpuIfTargetWinEnable(i, MV_FALSE);
+#endif
+
+	/* we will use bank 0 as the representative of the all the DRAM banks,  */
+	/* since bank 0 must exist.                                             */	
+	for(i = 0; i < MV_DRAM_MAX_CS; i++)
+	{ 
+		/* if Bank exist */
+		if(MV_OK == mvDramBankInfoGet(i, &bankInfo[i]))
+		{
+			/* check it isn't SDRAM */
+			if(bankInfo[i].memoryType == MEM_TYPE_SDRAM)
+			{
+				mvOsPrintf("Dram: ERR. SDRAM type not supported !!!\n");
+				return MV_ERROR;
+			}
+			/* All banks must support registry in order to activate it */
+			if(bankInfo[i].registeredAddrAndControlInputs != 
+			   bankInfo[0].registeredAddrAndControlInputs)
+			{
+				mvOsPrintf("Dram: ERR. different Registered settings !!!\n");
+				return MV_ERROR;
+			}
+
+			/* Init the CPU window decode */
+			/* Note that the size in Bank info is in MB units 			*/
+			/* Note that the Dimm width might be different then the device DRAM width */
+			temp = MV_REG_READ(SDRAM_CONFIG_REG);
+			
+			deviceW = ((temp & SDRAM_DWIDTH_MASK) == SDRAM_DWIDTH_16BIT )? 16 : 32;
+			dimmW = bankInfo[0].dataWidth - (bankInfo[0].dataWidth % 16);
+			size = ((bankInfo[i].size << 20) / (dimmW/deviceW)); 
+
+			/* We can not change DRAM window settings while excecuting  	*/
+			/* code from it. That is why we skip the DRAM CS[0], saving     */
+			/* it to the ROM configuration routine	*/
+			if(i == SDRAM_CS0)
+			{
+				MV_U32 sizeToReg;
+				
+				/* Translate the given window size to register format */
+				sizeToReg = ctrlSizeToReg(size, SCSR_SIZE_ALIGNMENT);
+
+				/* Size parameter validity check. */
+				if (-1 == sizeToReg)
+				{
+					mvOsPrintf("mvCtrlAddrDecToReg: ERR. Win %d size invalid.\n"
+							   ,i);
+					return MV_BAD_PARAM;
+				}
+                
+				/* Size is located at upper 16 bits */
+				sizeToReg <<= SCSR_SIZE_OFFS;
+
+				/* enable it */
+				sizeToReg |= SCSR_WIN_EN;
+
+				MV_REG_WRITE(DRAM_BUF_REG0, sizeToReg);
+			}
+			else
+			{
+				dramDecWin.addrWin.baseLow = base;
+				dramDecWin.addrWin.size = size;
+				dramDecWin.enable = MV_TRUE;
+				
+				if (MV_OK != mvDramIfWinSet(SDRAM_CS0 + i, &dramDecWin))
+				{
+					mvOsPrintf("Dram: ERR. Fail to set bank %d!!!\n", 
+							   SDRAM_CS0 + i);
+					return MV_ERROR;
+				}
+			}
+			
+			base += size;
+
+			/* update the suportedCasLatencies mask */
+			bankInfo[0].suportedCasLatencies &= bankInfo[i].suportedCasLatencies;
+
+		}
+		else
+		{
+			if( i == 0 ) /* bank 0 doesn't exist */
+			{
+				mvOsPrintf("Dram: ERR. Fail to detect bank 0 !!!\n");
+				return MV_ERROR;
+			}
+			else
+			{
+				DB(mvOsPrintf("Dram: Could not find bank %d\n", i));
+				bankInfo[i].size = 0;     /* Mark this bank as non exist */
+			}
+		}
+	}
+
+	/* calculate minimum CAS */
+	minCas = minCasCalc(&bankInfo[0], busClk, forcedCl);
+	if (0 == minCas) 
+	{
+		mvOsOutput("Dram: Warn: Could not find CAS compatible to SysClk %dMhz\n",
+				   (busClk / 1000000));
+
+		if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2)
+		{
+			minCas = DDR2_CL_4; /* Continue with this CAS */
+			mvOsPrintf("Set default CAS latency 4\n");
+		}
+		else
+		{
+			minCas = DDR1_CL_3; /* Continue with this CAS */
+			mvOsPrintf("Set default CAS latency 3\n");
+		}
+	}
+
+	/* calc SDRAM_CONFIG_REG  and save it to temp register */
+	temp = sdramConfigRegCalc(&bankInfo[0], busClk);
+	if(-1 == temp)
+	{
+		mvOsPrintf("Dram: ERR. sdramConfigRegCalc failed !!!\n");
+		return MV_ERROR;
+	}
+	MV_REG_WRITE(DRAM_BUF_REG1, temp);
+
+	/* calc SDRAM_MODE_REG  and save it to temp register */ 
+	temp = sdramModeRegCalc(minCas);
+	if(-1 == temp)
+	{
+		mvOsPrintf("Dram: ERR. sdramModeRegCalc failed !!!\n");
+		return MV_ERROR;
+	}
+	MV_REG_WRITE(DRAM_BUF_REG2, temp);
+
+	/* calc SDRAM_EXTENDED_MODE_REG  and save it to temp register */ 
+	temp = sdramExtModeRegCalc(&bankInfo[0]);
+	if(-1 == temp)
+	{
+		mvOsPrintf("Dram: ERR. sdramModeRegCalc failed !!!\n");
+		return MV_ERROR;
+	}
+	MV_REG_WRITE(DRAM_BUF_REG10, temp);
+
+	/* calc D_UNIT_CONTROL_LOW  and save it to temp register */
+	temp = dunitCtrlLowRegCalc(&bankInfo[0], minCas); 
+	if(-1 == temp)
+	{
+		mvOsPrintf("Dram: ERR. dunitCtrlLowRegCalc failed !!!\n");
+		return MV_ERROR;
+	}
+	MV_REG_WRITE(DRAM_BUF_REG3, temp); 
+
+	/* calc SDRAM_ADDR_CTRL_REG  and save it to temp register */
+	temp = sdramAddrCtrlRegCalc(&bankInfo[0]);
+	if(-1 == temp)
+	{
+		mvOsPrintf("Dram: ERR. sdramAddrCtrlRegCalc failed !!!\n");
+		return MV_ERROR;
+	}
+	MV_REG_WRITE(DRAM_BUF_REG4, temp);
+
+	/* calc SDRAM_TIMING_CTRL_LOW_REG  and save it to temp register */
+	temp = sdramTimeCtrlLowRegCalc(&bankInfo[0], minCas, busClk);
+	if(-1 == temp)
+	{
+		mvOsPrintf("Dram: ERR. sdramTimeCtrlLowRegCalc failed !!!\n");
+		return MV_ERROR;
+	}
+	MV_REG_WRITE(DRAM_BUF_REG5, temp);
+
+	/* calc SDRAM_TIMING_CTRL_HIGH_REG  and save it to temp register */
+	temp = sdramTimeCtrlHighRegCalc(&bankInfo[0], busClk);
+	if(-1 == temp)
+	{
+		mvOsPrintf("Dram: ERR. sdramTimeCtrlHighRegCalc failed !!!\n");
+		return MV_ERROR;
+	}
+	MV_REG_WRITE(DRAM_BUF_REG6, temp);
+
+	/* Config DDR2 On Die Termination (ODT) registers */
+	if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2)
+	{
+		sdramDDr2OdtConfig(bankInfo);
+	}
+	
+	/* Note that DDR SDRAM Address/Control and Data pad calibration     */
+	/* settings is done in mvSdramIfConfig.s                            */
+
+	return retVal;
+}
+
+/*******************************************************************************
+* minCasCalc - Calculate the Minimum CAS latency which can be used.
+*
+* DESCRIPTION:
+*	Calculate the minimum CAS latency that can be used, base on the DRAM
+*	parameters and the SDRAM bus Clock freq.
+*
+* INPUT:
+*	busClk    - the DRAM bus Clock.
+*	pBankInfo - bank info parameters.
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       The minimum CAS Latency. The function returns 0 if max CAS latency
+*		supported by banks is incompatible with system bus clock frequancy.
+*
+*******************************************************************************/
+static MV_U32 minCasCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk, 
+						 MV_U32 forcedCl)
+{
+	MV_U32 count = 1, j;
+	MV_U32 busClkPs = 1000000000 / (busClk / 1000);  /* in ps units */
+	MV_U32 startBit, stopBit;
+	
+	/*     DDR 1:
+			*******-******-******-******-******-******-******-******* 
+			* bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * 
+			*******-******-******-******-******-******-******-******* 
+	CAS	=	* TBD  |  4   | 3.5  |   3  | 2.5  |  2   | 1.5  |   1  * 
+			*********************************************************/
+	
+	/*     DDR 2:
+			*******-******-******-******-******-******-******-******* 
+			* bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * 
+			*******-******-******-******-******-******-******-******* 
+	CAS	=	* TBD  | TBD  |  5   |  4   |  3   |  2   | TBD  | TBD  * 
+			*********************************************************/
+	
+	
+	/* If we are asked to use the forced CAL */
+	if (forcedCl)
+	{
+		mvOsPrintf("DRAM: Using forced CL %d.%d\n", (forcedCl / 10), 
+													(forcedCl % 10));
+	
+		if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2)
+		{
+			if (forcedCl == 30)
+				pBankInfo->suportedCasLatencies = 0x08;
+			else if (forcedCl == 40)
+				pBankInfo->suportedCasLatencies = 0x10;
+			else
+			{
+				mvOsPrintf("Forced CL %d.%d not supported. Set default CL 4\n", 
+						   (forcedCl / 10), (forcedCl % 10));
+				pBankInfo->suportedCasLatencies = 0x10;
+			}
+		}
+		else
+		{
+			if (forcedCl == 15)
+				pBankInfo->suportedCasLatencies = 0x02;
+			else if (forcedCl == 20)
+				pBankInfo->suportedCasLatencies = 0x04;
+			else if (forcedCl == 25)
+				pBankInfo->suportedCasLatencies = 0x08;
+			else if (forcedCl == 30)
+				pBankInfo->suportedCasLatencies = 0x10;
+			else if (forcedCl == 40)
+				pBankInfo->suportedCasLatencies = 0x40;
+			else
+			{
+				mvOsPrintf("Forced CL %d.%d not supported. Set default CL 3\n", 
+						   (forcedCl / 10), (forcedCl % 10));
+				pBankInfo->suportedCasLatencies = 0x10;
+			}
+		}
+	
+		return pBankInfo->suportedCasLatencies;        
+	}   
+	
+	/* go over the supported cas mask from Max Cas down and check if the 	*/
+	/* SysClk stands in its time requirments.								*/
+	
+	
+	DB(mvOsPrintf("Dram: minCasCalc supported mask = %x busClkPs = %x \n",
+								pBankInfo->suportedCasLatencies,busClkPs ));
+	for(j = 7; j > 0; j--)
+	{
+		if((pBankInfo->suportedCasLatencies >> j) & BIT0 )
+		{
+			/* Reset the bits for CL incompatible for the sysClk            */
+			switch (count)
+			{
+				case 1: 
+					if (pBankInfo->minCycleTimeAtMaxCasLatPs > busClkPs) 
+						pBankInfo->suportedCasLatencies &= ~(BIT0 << j);
+					count++;
+					break;
+				case 2: 
+					if (pBankInfo->minCycleTimeAtMaxCasLatMinus1Ps > busClkPs)
+						pBankInfo->suportedCasLatencies &= ~(BIT0 << j);
+					count++;
+					break;
+				case 3: 
+					if (pBankInfo->minCycleTimeAtMaxCasLatMinus2Ps > busClkPs)
+						pBankInfo->suportedCasLatencies &= ~(BIT0 << j);
+					count++;
+					break;
+				default: 
+					pBankInfo->suportedCasLatencies &= ~(BIT0 << j);
+					break;
+			}
+		}
+	}
+	
+	DB(mvOsPrintf("Dram: minCasCalc support = %x (after SysCC calc)\n",
+				  pBankInfo->suportedCasLatencies ));
+	
+	/* SDRAM DDR1 controller supports CL 1.5 to 3.5 */
+	/* SDRAM DDR2 controller supports CL 3 to 5     */
+	if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2)
+	{
+		startBit = 3;   /* DDR2 support CL start with CL3 (bit 3) */
+		stopBit  = 5;   /* DDR2 support CL stops with CL5 (bit 5) */
+	}
+	else
+	{
+		startBit = 1;   /* DDR1 support CL start with CL1.5 (bit 3) */
+		stopBit  = 4;   /* DDR1 support CL stops with CL3 (bit 4)   */
+	}
+	
+	for(j = startBit; j <= stopBit ; j++)
+	{
+		if((pBankInfo->suportedCasLatencies >> j) & BIT0 )
+		{
+			DB(mvOsPrintf("Dram: minCasCalc choose CAS %x \n",(BIT0 << j)));
+			return (BIT0 << j);
+		}
+	}
+	
+	return 0; 
+}
+
+/*******************************************************************************
+* sdramConfigRegCalc - Calculate sdram config register
+*
+* DESCRIPTION: Calculate sdram config register optimized value based
+*			on the bank info parameters.
+*
+* INPUT:
+*	pBankInfo - sdram bank parameters
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       sdram config reg value.
+*
+*******************************************************************************/
+static MV_U32 sdramConfigRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk)
+{
+	MV_U32 sdramConfig = 0;
+	MV_U32 refreshPeriod;
+	
+	busClk /= 1000000; /* we work with busClk in MHz */
+	
+	sdramConfig = MV_REG_READ(SDRAM_CONFIG_REG);
+	
+	/* figure out the memory refresh internal */
+	switch (pBankInfo->refreshInterval & 0xf)
+	{
+		case 0x0: /* refresh period is 15.625 usec */
+			refreshPeriod = 15625;
+			break;
+		case 0x1: /* refresh period is 3.9 usec  	*/
+			refreshPeriod = 3900;
+			break;
+		case 0x2: /* refresh period is 7.8 usec 	*/
+			refreshPeriod = 7800;
+			break;
+		case 0x3: /* refresh period is 31.3 usec	*/
+			refreshPeriod = 31300;
+			break;
+		case 0x4: /* refresh period is 62.5 usec	*/
+			refreshPeriod = 62500;
+			break;
+		case 0x5: /* refresh period is 125 usec 	*/
+			refreshPeriod = 125000;
+			break;
+		default:  /* refresh period undefined 					*/
+			mvOsPrintf("Dram: ERR. DRAM refresh period is unknown!\n");
+			return -1;
+	}
+	
+	/* Now the refreshPeriod is in register format value */
+	refreshPeriod = (busClk * refreshPeriod) / 1000;
+	
+	DB(mvOsPrintf("Dram: sdramConfigRegCalc calculated refresh interval %0x\n", 
+				  refreshPeriod));
+
+	/* make sure the refresh value is only 14 bits */
+	if(refreshPeriod > SDRAM_REFRESH_MAX)
+	{
+		refreshPeriod = SDRAM_REFRESH_MAX;
+		DB(mvOsPrintf("Dram: sdramConfigRegCalc adjusted refresh interval %0x\n", 
+					  refreshPeriod));
+	}
+	
+	/* Clear the refresh field */
+	sdramConfig &= ~SDRAM_REFRESH_MASK;
+	
+	/* Set new value to refresh field */
+	sdramConfig |= (refreshPeriod & SDRAM_REFRESH_MASK);
+	
+	/*  registered DRAM ? */
+	if ( pBankInfo->registeredAddrAndControlInputs )
+	{
+		/* it's registered DRAM, so set the reg. DRAM bit */
+		sdramConfig |= SDRAM_REGISTERED;
+		mvOsPrintf("DRAM Attribute: Registered address and control inputs.\n");
+	}
+	
+	/* set DDR SDRAM devices configuration */
+	sdramConfig &= ~SDRAM_DCFG_MASK;    /* Clear Dcfg field */
+	
+	switch (pBankInfo->sdramWidth)
+	{
+		case 8:  /* memory is x8 */
+			sdramConfig |= SDRAM_DCFG_X8_DEV;
+			DB(mvOsPrintf("Dram: sdramConfigRegCalc SDRAM device width x8\n"));
+			break;
+		case 16:
+			sdramConfig |= SDRAM_DCFG_X16_DEV;
+			DB(mvOsPrintf("Dram: sdramConfigRegCalc SDRAM device width x16\n"));
+			break;
+		default: /* memory width unsupported */
+			mvOsPrintf("Dram: ERR. DRAM chip width is unknown!\n");
+			return -1;
+	}
+
+	/* Set static default settings */
+	sdramConfig |= SDRAM_CONFIG_DV;
+	
+	DB(mvOsPrintf("Dram: sdramConfigRegCalc set sdramConfig to 0x%x\n",
+				  sdramConfig));
+	
+	return sdramConfig;  
+}
+
+/*******************************************************************************
+* sdramModeRegCalc - Calculate sdram mode register
+*
+* DESCRIPTION: Calculate sdram mode register optimized value based
+*			on the bank info parameters and the minCas.
+*
+* INPUT:
+*	minCas	  - minimum CAS supported. 
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       sdram mode reg value.
+*
+*******************************************************************************/
+static MV_U32 sdramModeRegCalc(MV_U32 minCas)
+{
+	MV_U32 sdramMode;
+		
+	sdramMode = MV_REG_READ(SDRAM_MODE_REG);
+	
+	/* Clear CAS Latency field */
+	sdramMode &= ~SDRAM_CL_MASK;
+	
+	mvOsPrintf("DRAM CAS Latency ");
+	
+	if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2)
+	{            	
+		switch (minCas)
+		{
+			case DDR2_CL_3: 
+				sdramMode |= SDRAM_DDR2_CL_3;
+				mvOsPrintf("3.\n");
+				break;
+			case DDR2_CL_4: 
+				sdramMode |= SDRAM_DDR2_CL_4;
+				mvOsPrintf("4.\n");
+				break;
+			case DDR2_CL_5: 
+				sdramMode |= SDRAM_DDR2_CL_5;
+				mvOsPrintf("5.\n");
+				break;
+			default:
+				mvOsPrintf("\nsdramModeRegCalc ERROR: Max. CL out of range\n");
+				return -1;
+		}
+	sdramMode |= DDR2_MODE_REG_DV;
+	}
+	else	/* DDR1 */
+	{
+		switch (minCas)
+		{			
+			case DDR1_CL_1_5: 
+				sdramMode |= SDRAM_DDR1_CL_1_5;
+				mvOsPrintf("1.5\n");
+				break;
+			case DDR1_CL_2: 
+				sdramMode |= SDRAM_DDR1_CL_2;
+				mvOsPrintf("2\n");
+				break;            
+			case DDR1_CL_2_5: 
+				sdramMode |= SDRAM_DDR1_CL_2_5;
+				mvOsPrintf("2.5\n");
+				break;
+			case DDR1_CL_3: 
+				sdramMode |= SDRAM_DDR1_CL_3;
+				mvOsPrintf("3\n");
+				break;
+			case DDR1_CL_4: 
+				sdramMode |= SDRAM_DDR1_CL_4;
+				mvOsPrintf("4\n");
+				break;
+			default:
+				mvOsPrintf("\nsdramModeRegCalc ERROR: Max. CL out of range\n");
+				return -1;	
+		}
+		sdramMode |= DDR1_MODE_REG_DV;		
+	}
+	
+	DB(mvOsPrintf("nsdramModeRegCalc register 0x%x\n", sdramMode ));
+
+	return sdramMode;
+}
+
+/*******************************************************************************
+* sdramExtModeRegCalc - Calculate sdram Extended mode register
+*
+* DESCRIPTION: 
+*		Return sdram Extended mode register value based
+*		on the bank info parameters and bank presence.
+*
+* INPUT:
+*	pBankInfo - sdram bank parameters
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       sdram Extended mode reg value.
+*
+*******************************************************************************/
+static MV_U32 sdramExtModeRegCalc(MV_DRAM_BANK_INFO *pBankInfo)
+{
+	MV_U32 populateBanks = 0;
+	int bankNum;
+	if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2)
+	{
+	/* Represent the populate banks in binary form */
+	for(bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++)
+	{
+		if (0 != pBankInfo[bankNum].size)
+		{
+				populateBanks |= (1 << bankNum);
+			}
+		}
+	
+		switch(populateBanks)
+		{
+			case(BANK_PRESENT_CS0):
+				return DDR_SDRAM_EXT_MODE_CS0_DV;
+		
+			case(BANK_PRESENT_CS0_CS1):
+				return DDR_SDRAM_EXT_MODE_CS0_DV;
+		
+			case(BANK_PRESENT_CS0_CS2):
+				return DDR_SDRAM_EXT_MODE_CS0_CS2_DV;
+		
+			case(BANK_PRESENT_CS0_CS1_CS2):
+				return DDR_SDRAM_EXT_MODE_CS0_CS2_DV;
+		
+			case(BANK_PRESENT_CS0_CS2_CS3):
+				return DDR_SDRAM_EXT_MODE_CS0_CS2_DV;
+		
+			case(BANK_PRESENT_CS0_CS2_CS3_CS4):
+				return DDR_SDRAM_EXT_MODE_CS0_CS2_DV;
+		
+			default:
+				mvOsPrintf("sdramExtModeRegCalc: Invalid DRAM bank presence\n");
+				return -1;
+		} 
+	}
+	return 0;
+}
+
+/*******************************************************************************
+* dunitCtrlLowRegCalc - Calculate sdram dunit control low register
+*
+* DESCRIPTION: Calculate sdram dunit control low register optimized value based
+*			on the bank info parameters and the minCas.
+*
+* INPUT:
+*	pBankInfo - sdram bank parameters
+*	minCas	  - minimum CAS supported. 
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       sdram dunit control low reg value.
+*
+*******************************************************************************/
+static MV_U32 dunitCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 minCas)
+{
+	MV_U32 dunitCtrlLow;
+	
+	dunitCtrlLow = MV_REG_READ(SDRAM_DUNIT_CTRL_REG);
+	
+	/* Clear StBurstDel field */
+	dunitCtrlLow &= ~SDRAM_ST_BURST_DEL_MASK;
+	
+#ifdef MV_88W8660
+	/* Clear address/control output timing field */
+	dunitCtrlLow &= ~SDRAM_CTRL_POS_RISE;
+#endif /* MV_88W8660 */
+
+	DB(mvOsPrintf("Dram: dunitCtrlLowRegCalc\n"));
+	
+	/* For proper sample of read data set the Dunit Control register's      */
+	/* stBurstDel bits [27:24]                                              */
+			/********-********-********-********-********-*********
+			* CL=1.5 |  CL=2  | CL=2.5 |  CL=3  |  CL=4  |  CL=5  *
+			*********-********-********-********-********-*********
+Not Reg.	*  0011  |  0011  |  0100  |  0100  |  0101  |  TBD   *
+			*********-********-********-********-********-*********
+Registered	*  0100  |  0100  |  0101  |  0101  |  0110  |  TBD   *
+			*********-********-********-********-********-*********/
+    
+	if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2)
+	{
+		switch (minCas)
+		{
+			case DDR2_CL_3: 
+					/* registerd DDR SDRAM? */
+				if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE) 		
+					dunitCtrlLow |= 0x5 << SDRAM_ST_BURST_DEL_OFFS;
+				else
+					dunitCtrlLow |= 0x4 << SDRAM_ST_BURST_DEL_OFFS;
+				break;
+			case DDR2_CL_4: 
+				/* registerd DDR SDRAM? */
+				if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE) 		
+					dunitCtrlLow |= 0x6 << SDRAM_ST_BURST_DEL_OFFS;
+				else
+					dunitCtrlLow |= 0x5 << SDRAM_ST_BURST_DEL_OFFS;	
+				break;
+			default:
+				mvOsPrintf("Dram: dunitCtrlLowRegCalc Max. CL out of range %d\n", 
+						   minCas);
+				return -1;
+		}
+	}
+	else    /* DDR1 */
+	{
+		switch (minCas)
+		{
+			case DDR1_CL_1_5: 
+				/* registerd DDR SDRAM? */
+				if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE)
+					dunitCtrlLow |= 0x4 << SDRAM_ST_BURST_DEL_OFFS;
+				else
+					dunitCtrlLow |= 0x3 << SDRAM_ST_BURST_DEL_OFFS;
+				break;
+			case DDR1_CL_2: 
+				/* registerd DDR SDRAM? */
+				if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE)
+					dunitCtrlLow |= 0x4 << SDRAM_ST_BURST_DEL_OFFS;
+				else
+					dunitCtrlLow |= 0x3 << SDRAM_ST_BURST_DEL_OFFS;
+				break;
+			case DDR1_CL_2_5: 
+				/* registerd DDR SDRAM? */
+				if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE)
+					dunitCtrlLow |= 0x5 << SDRAM_ST_BURST_DEL_OFFS;
+				else
+					dunitCtrlLow |= 0x4 << SDRAM_ST_BURST_DEL_OFFS;	
+				break;
+			case DDR1_CL_3: 
+				/* registerd DDR SDRAM? */
+				if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE)
+					dunitCtrlLow |= 0x5 << SDRAM_ST_BURST_DEL_OFFS;
+				else
+					dunitCtrlLow |= 0x4 << SDRAM_ST_BURST_DEL_OFFS;	
+				break;
+			case DDR1_CL_4: 
+				/* registerd DDR SDRAM? */
+				if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE)
+					dunitCtrlLow |= 0x6 << SDRAM_ST_BURST_DEL_OFFS;
+				else
+					dunitCtrlLow |= 0x5 << SDRAM_ST_BURST_DEL_OFFS;	
+				break;
+			default:
+				mvOsPrintf("Dram: dunitCtrlLowRegCalc Max. CL out of range %d\n", 
+						   minCas);
+				return -1;
+	}
+	
+	}
+	DB(mvOsPrintf("Dram: Reg dunit control low = %x\n", dunitCtrlLow ));
+
+	return dunitCtrlLow;
+}  
+                                                                    
+/*******************************************************************************
+* sdramAddrCtrlRegCalc - Calculate sdram address control register
+*
+* DESCRIPTION: Calculate sdram address control register optimized value based
+*			on the bank info parameters and the minCas.
+*
+* INPUT:
+*	pBankInfo - sdram bank parameters
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       sdram address control reg value.
+*
+*******************************************************************************/
+static MV_U32 sdramAddrCtrlRegCalc(MV_DRAM_BANK_INFO *pBankInfo)
+{
+	MV_U32 addrCtrl = 0;
+	
+	/* Set Address Control register static configuration bits */
+	addrCtrl = MV_REG_READ(SDRAM_ADDR_CTRL_REG);
+	
+	/* Set address control default value */
+	addrCtrl |= SDRAM_ADDR_CTRL_DV;  
+	
+	/* Clear DSize field */
+	addrCtrl &= ~SDRAM_DSIZE_MASK;
+	
+	/* Note that density is in MB units */
+	switch (pBankInfo->deviceDensity) 
+	{
+		case 128:                 /* 128 Mbit */
+			DB(mvOsPrintf("DRAM Device Density 128Mbit\n"));
+			addrCtrl |= SDRAM_DSIZE_128Mb;
+			break;
+		case 256:                 /* 256 Mbit */
+			DB(mvOsPrintf("DRAM Device Density 256Mbit\n"));
+			addrCtrl |= SDRAM_DSIZE_256Mb;
+			break;
+		case 512:                /* 512 Mbit */
+			DB(mvOsPrintf("DRAM Device Density 512Mbit\n"));
+			addrCtrl |= SDRAM_DSIZE_512Mb;
+			break;
+		default:
+			mvOsPrintf("Dram: sdramAddrCtrl unsupported RAM-Device size %d\n",
+                       pBankInfo->deviceDensity);
+			return -1;
+	}
+     
+	/* SDRAM address control */
+	DB(mvOsPrintf("Dram: setting sdram address control with: %x \n", addrCtrl));
+
+	return addrCtrl;
+}
+
+/*******************************************************************************
+* sdramTimeCtrlLowRegCalc - Calculate sdram timing control low register
+*
+* DESCRIPTION: 
+*       This function calculates sdram timing control low register 
+*       optimized value based on the bank info parameters and the minCas.
+*
+* INPUT:
+*	    pBankInfo - sdram bank parameters
+*       busClk    - Bus clock
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       sdram timinf control low reg value.
+*
+*******************************************************************************/
+static MV_U32 sdramTimeCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo, 
+                                                MV_U32 minCas, MV_U32 busClk)
+{
+	MV_U32 tRp  = 0;
+	MV_U32 tRrd = 0;
+	MV_U32 tRcd = 0;
+	MV_U32 tRas = 0;
+	MV_U32 tWr  = 0;
+	MV_U32 tWtr = 0;
+	MV_U32 tRtp = 0;
+	
+	MV_U32 bankNum;
+	
+	busClk = busClk / 1000000;    /* In MHz */
+	
+	/* Scan all DRAM banks to find maximum timing values */
+	for (bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++)
+	{
+		tRp  = MV_MAX(tRp,  pBankInfo[bankNum].minRowPrechargeTime);
+		tRrd = MV_MAX(tRrd, pBankInfo[bankNum].minRowActiveToRowActive);
+		tRcd = MV_MAX(tRcd, pBankInfo[bankNum].minRasToCasDelay);
+		tRas = MV_MAX(tRas, pBankInfo[bankNum].minRasPulseWidth);
+	}
+	
+	/* Extract timing (in ns) from SPD value. We ignore the tenth ns part.  */
+	/* by shifting the data two bits right.                                 */
+	tRp  = tRp  >> 2;    /* For example 0x50 -> 20ns                        */
+	tRrd = tRrd >> 2;
+	tRcd = tRcd >> 2;
+	
+	/* Extract clock cycles from time parameter. We need to round up        */
+	tRp  = ((busClk * tRp)  / 1000) + (((busClk * tRp)  % 1000) ? 1 : 0);
+	/* Micron work around for 133MHz */
+	if (busClk == 133)
+		tRp += 1;
+	DB(mvOsPrintf("Dram  Timing Low: tRp = %d ", tRp));
+	tRrd = ((busClk * tRrd) / 1000) + (((busClk * tRrd) % 1000) ? 1 : 0);
+	/* JEDEC min reqeirments tRrd = 2 */
+	if (tRrd < 2)
+		tRrd = 2;
+	DB(mvOsPrintf("tRrd = %d ", tRrd));
+	tRcd = ((busClk * tRcd) / 1000) + (((busClk * tRcd) % 1000) ? 1 : 0);
+	DB(mvOsPrintf("tRcd = %d ", tRcd));
+	tRas = ((busClk * tRas) / 1000) + (((busClk * tRas) % 1000) ? 1 : 0);
+	DB(mvOsPrintf("tRas = %d ", tRas));
+	
+	/* tWr and tWtr is different for DDR1 and DDR2. tRtp is only for DDR2   */
+	if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2)
+	{
+		/* Scan all DRAM banks to find maximum timing values */
+		for (bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++)
+		{
+			tWr  = MV_MAX(tWr,  pBankInfo[bankNum].minWriteRecoveryTime);
+			tWtr = MV_MAX(tWtr, pBankInfo[bankNum].minWriteToReadCmdDelay);
+			tRtp = MV_MAX(tRtp, pBankInfo[bankNum].minReadToPrechCmdDelay);
+		}
+		
+		/* Extract timing (in ns) from SPD value. We ignore the tenth ns    */
+		/* part by shifting the data two bits right.                        */
+		tWr  = tWr  >> 2;    /* For example 0x50 -> 20ns                    */
+		tWtr = tWtr >> 2;
+		tRtp = tRtp >> 2;
+	
+		/* Extract clock cycles from time parameter. We need to round up    */
+		tWr  = ((busClk * tWr)  / 1000) + (((busClk * tWr)  % 1000) ? 1 : 0);
+		DB(mvOsPrintf("tWr = %d ", tWr));
+		tWtr = ((busClk * tWtr) / 1000) + (((busClk * tWtr) % 1000) ? 1 : 0);
+		/* JEDEC min reqeirments tWtr = 2 */
+		if (tWtr < 2)
+			tWtr = 2;
+		DB(mvOsPrintf("tWtr = %d ", tWtr));
+		tRtp = ((busClk * tRtp) / 1000) + (((busClk * tRtp) % 1000) ? 1 : 0);
+		/* JEDEC min reqeirments tRtp = 2 */
+		if (tRtp < 2)
+			tRtp = 2;
+		DB(mvOsPrintf("tRtp = %d ", tRtp));
+	}
+	else
+	{    
+		tWr  = ((busClk*SDRAM_TWR) / 1000) + (((busClk*SDRAM_TWR) % 1000)?1:0);
+		
+		if ((200 == busClk) || ((100 == busClk) && (DDR1_CL_1_5 == minCas)))
+		{
+			tWtr = 2;
+		}
+		else
+		{
+			tWtr = 1;
+		}
+		
+		tRtp = 2; /* Must be set to 0x1 (two cycles) when using DDR1 */
+	}
+	
+	DB(mvOsPrintf("tWtr = %d\n", tWtr));
+	
+	/* Note: value of 0 in register means one cycle, 1 means two and so on  */
+	return (((tRp  - 1) << SDRAM_TRP_OFFS)	|
+			((tRrd - 1) << SDRAM_TRRD_OFFS)	|
+			((tRcd - 1) << SDRAM_TRCD_OFFS)	|
+			((tRas - 1) << SDRAM_TRAS_OFFS)	|
+			((tWr  - 1) << SDRAM_TWR_OFFS)	|
+			((tWtr - 1) << SDRAM_TWTR_OFFS)	|
+			((tRtp - 1) << SDRAM_TRTP_OFFS));
+}
+
+/*******************************************************************************
+* sdramTimeCtrlHighRegCalc - Calculate sdram timing control high register
+*
+* DESCRIPTION: 
+*       This function calculates sdram timing control high register 
+*       optimized value based on the bank info parameters and the bus clock.
+*
+* INPUT:
+*	    pBankInfo - sdram bank parameters
+*       busClk    - Bus clock
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       sdram timinf control high reg value.
+*
+*******************************************************************************/
+static MV_U32 sdramTimeCtrlHighRegCalc(MV_DRAM_BANK_INFO *pBankInfo, 
+                                                                MV_U32 busClk)
+{
+	MV_U32 tRfc;
+	MV_U32 timeNs = 0;
+	int bankNum;
+	MV_U32 sdramTw2wCyc = 0;
+	
+	busClk = busClk / 1000000;    /* In MHz */
+	
+	/* tRfc is different for DDR1 and DDR2. */
+	if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2)
+	{
+		MV_U32 bankNum;
+	
+		/* Scan all DRAM banks to find maximum timing values */
+		for (bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++)
+			timeNs = MV_MAX(timeNs,  pBankInfo[bankNum].minRefreshToActiveCmd);
+	}
+	else
+	{
+		if (pBankInfo[0].deviceDensity == _1G)
+		{
+			timeNs = SDRAM_TRFC_1G;
+		}
+		else
+		{
+			if (200 == busClk)
+			{
+				timeNs = SDRAM_TRFC_64_512M_AT_200MHZ;
+			}
+			else
+			{
+				timeNs = SDRAM_TRFC_64_512M;
+			}
+		}
+	}
+	
+	tRfc = ((busClk * timeNs)  / 1000) + (((busClk * timeNs)  % 1000) ? 1 : 0);
+	
+	DB(mvOsPrintf("Dram  Timing High: tRfc = %d\n", tRfc));
+
+	
+	/* Represent the populate banks in binary form */
+	for(bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++)
+	{
+		if (0 != pBankInfo[bankNum].size)
+			sdramTw2wCyc++;
+	}
+
+	/* If we have more the 1 bank then we need the TW2W in 1 for ODT switch */	
+	if (sdramTw2wCyc > 1)
+		sdramTw2wCyc = 1;
+	else
+		sdramTw2wCyc = 0;
+
+	/* Note: value of 0 in register means one cycle, 1 means two and so on  */
+	return ((((tRfc - 1) & SDRAM_TRFC_MASK)	<< SDRAM_TRFC_OFFS)		|
+			((SDRAM_TR2R_CYC - 1)			<< SDRAM_TR2R_OFFS)		|
+			((SDRAM_TR2WW2R_CYC - 1)		<< SDRAM_TR2W_W2R_OFFS)	|
+			(((tRfc - 1) >> 4)				<< SDRAM_TRFC_EXT_OFFS)	|
+			(sdramTw2wCyc					<< SDRAM_TW2W_OFFS));
+	
+}
+
+/*******************************************************************************
+* sdramDDr2OdtConfig - Set DRAM DDR2 On Die Termination registers.
+*
+* DESCRIPTION: 
+*       This function config DDR2 On Die Termination (ODT) registers.
+*	ODT configuration is done according to DIMM presence:
+*	
+*       Presence	  Ctrl Low    Ctrl High  Dunit Ctrl   Ext Mode  
+*	CS0	         0x84210000  0x00000000  0x0000780F  0x00000440 
+*	CS0+CS1          0x84210000  0x00000000  0x0000780F  0x00000440 
+*	CS0+CS2	    	 0x030C030C  0x00000000  0x0000740F  0x00000404 
+*	CS0+CS1+CS2	 0x030C030C  0x00000000  0x0000740F  0x00000404 
+*	CS0+CS2+CS3	 0x030C030C  0x00000000  0x0000740F  0x00000404 
+*	CS0+CS1+CS2+CS3  0x030C030C  0x00000000  0x0000740F  0x00000404 
+*		
+* INPUT:
+*		pBankInfo - bank info parameters.
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       None
+*******************************************************************************/
+static void sdramDDr2OdtConfig(MV_DRAM_BANK_INFO *pBankInfo)
+{
+	MV_U32 populateBanks = 0;
+	MV_U32 odtCtrlLow, odtCtrlHigh, dunitOdtCtrl;
+	int bankNum;
+	
+	/* Represent the populate banks in binary form */
+	for(bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++)
+	{
+		if (0 != pBankInfo[bankNum].size)
+		{
+				populateBanks |= (1 << bankNum);
+			}
+		}
+	
+	switch(populateBanks)
+	{
+		case(BANK_PRESENT_CS0):
+			odtCtrlLow   = DDR2_ODT_CTRL_LOW_CS0_DV;
+			odtCtrlHigh  = DDR2_ODT_CTRL_HIGH_CS0_DV;
+			dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_DV;
+			break;
+		case(BANK_PRESENT_CS0_CS1):
+			odtCtrlLow   = DDR2_ODT_CTRL_LOW_CS0_DV;
+			odtCtrlHigh  = DDR2_ODT_CTRL_HIGH_CS0_DV;
+			dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_DV;
+			break;
+		case(BANK_PRESENT_CS0_CS2):
+			odtCtrlLow   = DDR2_ODT_CTRL_LOW_CS0_CS2_DV;
+			odtCtrlHigh  = DDR2_ODT_CTRL_HIGH_CS0_CS2_DV;
+			dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_CS2_DV;
+			break;
+		case(BANK_PRESENT_CS0_CS1_CS2):
+			odtCtrlLow   = DDR2_ODT_CTRL_LOW_CS0_CS2_DV;
+			odtCtrlHigh  = DDR2_ODT_CTRL_HIGH_CS0_CS2_DV;
+			dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_CS2_DV;
+			break;
+		case(BANK_PRESENT_CS0_CS2_CS3):
+			odtCtrlLow   = DDR2_ODT_CTRL_LOW_CS0_CS2_DV;
+			odtCtrlHigh  = DDR2_ODT_CTRL_HIGH_CS0_CS2_DV;
+			dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_CS2_DV;
+			break;
+		case(BANK_PRESENT_CS0_CS2_CS3_CS4):
+			odtCtrlLow   = DDR2_ODT_CTRL_LOW_CS0_CS2_DV;
+			odtCtrlHigh  = DDR2_ODT_CTRL_HIGH_CS0_CS2_DV;
+			dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_CS2_DV;
+			break;
+		default:
+			mvOsPrintf("sdramDDr2OdtConfig: Invalid DRAM bank presence\n");
+			return;
+	} 
+	MV_REG_WRITE(DRAM_BUF_REG7, odtCtrlLow);
+	MV_REG_WRITE(DRAM_BUF_REG8, odtCtrlHigh);
+	MV_REG_WRITE(DRAM_BUF_REG9, dunitOdtCtrl);
+	return;
+}
+#endif /* defined(MV_INC_BOARD_DDIM) */
+
+/*******************************************************************************
+* mvDramIfWinSet - Set DRAM interface address decode window
+*
+* DESCRIPTION: 
+*       This function sets DRAM interface address decode window.
+*
+* INPUT:
+*	    target      - System target. Use only SDRAM targets.
+*       pAddrDecWin - SDRAM address window structure.
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       MV_BAD_PARAM if parameters are invalid or window is invalid, MV_OK
+*       otherwise.
+*******************************************************************************/
+MV_STATUS mvDramIfWinSet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin)
+{
+	MV_U32 baseReg=0,sizeReg=0;
+	MV_U32 baseToReg=0 , sizeToReg=0;
+
+    /* Check parameters */
+	if (!MV_TARGET_IS_DRAM(target))
+	{
+		mvOsPrintf("mvDramIfWinSet: target %d is not SDRAM\n", target);
+		return MV_BAD_PARAM;
+	}
+
+    /* Check if the requested window overlaps with current enabled windows	*/
+    if (MV_TRUE == sdramIfWinOverlap(target, &pAddrDecWin->addrWin))
+	{
+        mvOsPrintf("mvDramIfWinSet: ERR. Target %d overlaps\n", target);
+		return MV_BAD_PARAM;
+	}
+
+	/* check if address is aligned to the size */
+	if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size))
+	{
+		mvOsPrintf("mvDramIfWinSet:Error setting DRAM interface window %d."\
+				   "\nAddress 0x%08x is unaligned to size 0x%x.\n",
+                   target, 
+				   pAddrDecWin->addrWin.baseLow,
+				   pAddrDecWin->addrWin.size);
+		return MV_ERROR;
+	}
+
+	/* read base register*/
+	baseReg = MV_REG_READ(SDRAM_BASE_ADDR_REG(target));
+
+	/* read size register */
+	sizeReg = MV_REG_READ(SDRAM_SIZE_REG(target));
+
+	/* BaseLow[31:16] => base register [31:16]		*/
+	baseToReg = pAddrDecWin->addrWin.baseLow & SCBAR_BASE_MASK;
+
+	/* Write to address decode Base Address Register                  */
+	baseReg &= ~SCBAR_BASE_MASK;
+	baseReg |= baseToReg;
+
+	/* Translate the given window size to register format			*/
+	sizeToReg = ctrlSizeToReg(pAddrDecWin->addrWin.size, SCSR_SIZE_ALIGNMENT);
+
+	/* Size parameter validity check.                                   */
+	if (-1 == sizeToReg)
+	{
+		mvOsPrintf("mvCtrlAddrDecToReg: ERR. Win %d size invalid.\n",target);
+		return MV_BAD_PARAM;
+	}
+
+	/* set size */
+	sizeReg &= ~SCSR_SIZE_MASK;
+	/* Size is located at upper 16 bits */
+	sizeReg |= (sizeToReg << SCSR_SIZE_OFFS);
+
+	/* enable/Disable */
+	if (MV_TRUE == pAddrDecWin->enable)
+	{
+		sizeReg |= SCSR_WIN_EN;
+	}
+	else
+	{
+		sizeReg &= ~SCSR_WIN_EN;
+	}
+
+	/* 3) Write to address decode Base Address Register                   */
+	MV_REG_WRITE(SDRAM_BASE_ADDR_REG(target), baseReg);
+
+	/* Write to address decode Size Register                        	*/
+	MV_REG_WRITE(SDRAM_SIZE_REG(target), sizeReg);
+	
+	return MV_OK;
+}
+/*******************************************************************************
+* mvDramIfWinGet - Get DRAM interface address decode window
+*
+* DESCRIPTION: 
+*       This function gets DRAM interface address decode window.
+*
+* INPUT:
+*	    target - System target. Use only SDRAM targets.
+*
+* OUTPUT:
+*       pAddrDecWin - SDRAM address window structure.
+*
+* RETURN:
+*       MV_BAD_PARAM if parameters are invalid or window is invalid, MV_OK
+*       otherwise.
+*******************************************************************************/
+MV_STATUS mvDramIfWinGet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin)
+{
+	MV_U32 baseReg,sizeReg;
+	MV_U32 sizeRegVal;
+
+	/* Check parameters */
+	if (!MV_TARGET_IS_DRAM(target))
+	{
+		mvOsPrintf("mvDramIfWinGet: target %d is Illigal\n", target);
+		return MV_ERROR;
+	}
+
+	/* Read base and size registers */
+	sizeReg = MV_REG_READ(SDRAM_SIZE_REG(target));
+	baseReg = MV_REG_READ(SDRAM_BASE_ADDR_REG(target));
+
+	sizeRegVal = (sizeReg & SCSR_SIZE_MASK) >> SCSR_SIZE_OFFS;
+
+	pAddrDecWin->addrWin.size = ctrlRegToSize(sizeRegVal,
+											 SCSR_SIZE_ALIGNMENT);
+
+    /* Check if ctrlRegToSize returned OK */
+	if (-1 == pAddrDecWin->addrWin.size)
+	{
+		mvOsPrintf("mvDramIfWinGet: size of target %d is Illigal\n", target);
+		return MV_ERROR;
+	}
+
+	/* Extract base address						*/
+	/* Base register [31:16] ==> baseLow[31:16] 		*/
+	pAddrDecWin->addrWin.baseLow = baseReg & SCBAR_BASE_MASK;
+
+	pAddrDecWin->addrWin.baseHigh =  0;
+
+
+	if (sizeReg & SCSR_WIN_EN)
+	{
+		pAddrDecWin->enable = MV_TRUE;
+	}
+	else
+	{
+		pAddrDecWin->enable = MV_FALSE;			
+	}
+
+	return MV_OK;
+}
+/*******************************************************************************
+* mvDramIfWinEnable - Enable/Disable SDRAM address decode window
+*
+* DESCRIPTION: 
+*		This function enable/Disable SDRAM address decode window.
+*
+* INPUT:
+*	    target - System target. Use only SDRAM targets.
+*
+* OUTPUT:
+*		None.
+*
+* RETURN:
+*		MV_ERROR in case function parameter are invalid, MV_OK otherewise.
+*
+*******************************************************************************/
+MV_STATUS mvDramIfWinEnable(MV_TARGET target,MV_BOOL enable)
+{
+	MV_DRAM_DEC_WIN 	addrDecWin;
+
+	/* Check parameters */
+	if (!MV_TARGET_IS_DRAM(target))
+	{
+		mvOsPrintf("mvDramIfWinEnable: target %d is Illigal\n", target);
+		return MV_ERROR;
+	}
+
+	if (enable == MV_TRUE) 
+	{   /* First check for overlap with other enabled windows				*/
+		if (MV_OK != mvDramIfWinGet(target, &addrDecWin))
+		{
+			mvOsPrintf("mvDramIfWinEnable:ERR. Getting target %d failed.\n", 
+                                                                        target);
+			return MV_ERROR;
+		}
+		/* Check for overlapping */
+		if (MV_FALSE == sdramIfWinOverlap(target, &(addrDecWin.addrWin)))
+		{
+			/* No Overlap. Enable address decode winNum window              */
+			MV_REG_BIT_SET(SDRAM_SIZE_REG(target), SCSR_WIN_EN);
+		}
+		else
+		{   /* Overlap detected	*/
+			mvOsPrintf("mvDramIfWinEnable: ERR. Target %d overlap detect\n",
+                                                                        target);
+			return MV_ERROR;
+		}
+	}
+	else
+	{   /* Disable address decode winNum window                             */
+		MV_REG_BIT_RESET(SDRAM_SIZE_REG(target), SCSR_WIN_EN);
+	}
+
+	return MV_OK;
+}
+
+/*******************************************************************************
+* sdramIfWinOverlap - Check if an address window overlap an SDRAM address window
+*
+* DESCRIPTION:
+*		This function scan each SDRAM address decode window to test if it 
+*		overlapps the given address windoow 
+*
+* INPUT:
+*       target      - SDRAM target where the function skips checking.
+*       pAddrDecWin - The tested address window for overlapping with 
+*					  SDRAM windows.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_TRUE if the given address window overlaps any enabled address
+*       decode map, MV_FALSE otherwise.
+*
+*******************************************************************************/
+static MV_BOOL sdramIfWinOverlap(MV_TARGET target, MV_ADDR_WIN *pAddrWin)
+{
+	MV_TARGET	targetNum;
+	MV_DRAM_DEC_WIN 	addrDecWin;
+	
+	for(targetNum = SDRAM_CS0; targetNum < MV_DRAM_MAX_CS ; targetNum++)
+	{
+		/* don't check our winNum or illegal targets */
+		if (targetNum == target)
+		{
+			continue;
+		}
+		
+		/* Get window parameters 	*/
+		if (MV_OK != mvDramIfWinGet(targetNum, &addrDecWin))
+		{
+			mvOsPrintf("sdramIfWinOverlap: ERR. TargetWinGet failed\n");
+			return MV_ERROR;
+		}
+	
+		/* Do not check disabled windows	*/
+		if (MV_FALSE == addrDecWin.enable)
+		{
+			continue;
+		}
+	
+		if(MV_TRUE == ctrlWinOverlapTest(pAddrWin, &addrDecWin.addrWin))
+		{                    
+			mvOsPrintf(
+			"sdramIfWinOverlap: Required target %d overlap winNum %d\n", 
+			target, targetNum);
+			return MV_TRUE;           
+		}
+	}
+	
+	return MV_FALSE;
+}
+
+/*******************************************************************************
+* mvDramIfBankSizeGet - Get DRAM interface bank size.
+*
+* DESCRIPTION:
+*       This function returns the size of a given DRAM bank.
+*
+* INPUT:
+*       bankNum - Bank number.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       DRAM bank size. If bank is disabled the function return '0'. In case 
+*		or paramter is invalid, the function returns -1.
+*
+*******************************************************************************/
+MV_32 mvDramIfBankSizeGet(MV_U32 bankNum)
+{
+    MV_DRAM_DEC_WIN 	addrDecWin;
+	
+	/* Check parameters */
+	if (!MV_TARGET_IS_DRAM(bankNum))
+	{
+		mvOsPrintf("mvDramIfBankBaseGet: bankNum %d is invalid\n", bankNum);
+		return -1;
+	}
+	/* Get window parameters 	*/
+	if (MV_OK != mvDramIfWinGet(bankNum, &addrDecWin))
+	{
+		mvOsPrintf("sdramIfWinOverlap: ERR. TargetWinGet failed\n");
+		return -1;
+	}
+	
+	if (MV_TRUE == addrDecWin.enable)
+	{
+		return addrDecWin.addrWin.size;
+	}
+	else
+	{
+		return 0;
+	}
+}
+
+
+/*******************************************************************************
+* mvDramIfSizeGet - Get DRAM interface total size.
+*
+* DESCRIPTION:
+*       This function get the DRAM total size.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       DRAM total size. In case or paramter is invalid, the function 
+*		returns -1.
+*
+*******************************************************************************/
+MV_32 mvDramIfSizeGet(MV_VOID)
+{
+	MV_U32 totalSize = 0, bankSize = 0, bankNum;
+	
+	for(bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++)
+	{
+		bankSize = mvDramIfBankSizeGet(bankNum);
+
+		if (-1 == bankSize)
+		{
+			mvOsPrintf("Dram: mvDramIfSizeGet error with bank %d \n",bankNum);
+			return -1;
+		}
+		else
+		{
+			totalSize += bankSize;
+		}
+	}
+	
+	DB(mvOsPrintf("Dram: Total DRAM size is 0x%x \n",totalSize));
+	
+	return totalSize;
+}
+
+/*******************************************************************************
+* mvDramIfBankBaseGet - Get DRAM interface bank base.
+*
+* DESCRIPTION:
+*       This function returns the 32 bit base address of a given DRAM bank.
+*
+* INPUT:
+*       bankNum - Bank number.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       DRAM bank size. If bank is disabled or paramter is invalid, the 
+*		function returns -1.
+*
+*******************************************************************************/
+MV_32 mvDramIfBankBaseGet(MV_U32 bankNum)
+{
+    MV_DRAM_DEC_WIN 	addrDecWin;
+	
+	/* Check parameters */
+	if (!MV_TARGET_IS_DRAM(bankNum))
+	{
+		mvOsPrintf("mvDramIfBankBaseGet: bankNum %d is invalid\n", bankNum);
+		return -1;
+	}
+	/* Get window parameters 	*/
+	if (MV_OK != mvDramIfWinGet(bankNum, &addrDecWin))
+	{
+		mvOsPrintf("sdramIfWinOverlap: ERR. TargetWinGet failed\n");
+		return -1;
+	}
+	
+	if (MV_TRUE == addrDecWin.enable)
+	{
+		return addrDecWin.addrWin.baseLow;
+	}
+	else
+	{
+		return -1;
+	}
+}
+
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIf.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIf.h
new file mode 100644
index 0000000000..8bfa3e8838
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIf.h
@@ -0,0 +1,179 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvDramIfh
+#define __INCmvDramIfh
+
+/* includes */
+#include "ddr1_2/mvDramIfRegs.h"
+#include "ddr1_2/mvDramIfConfig.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+
+/* defines  */
+/* DRAM Timing parameters */
+#define SDRAM_TWR                    15  /* ns tWr */
+#define SDRAM_TRFC_64_512M_AT_200MHZ 70  /* ns tRfc for dens 64-512 @ 200MHz */
+#define SDRAM_TRFC_64_512M           75  /* ns tRfc for dens 64-512          */
+#define SDRAM_TRFC_1G                120 /* ns tRfc for dens 1GB             */
+#define SDRAM_TR2R_CYC               1   /* cycle for tR2r                   */
+#define SDRAM_TR2WW2R_CYC            1   /* cycle for tR2wW2r                */
+
+/* typedefs */
+
+/* enumeration for memory types */
+typedef enum _mvMemoryType
+{
+    MEM_TYPE_SDRAM,
+    MEM_TYPE_DDR1,
+    MEM_TYPE_DDR2
+}MV_MEMORY_TYPE;
+
+/* enumeration for DDR1 supported CAS Latencies */
+typedef enum _mvDimmDdr1Cas
+{
+    DDR1_CL_1_5  = 0x02, 
+    DDR1_CL_2    = 0x04, 
+    DDR1_CL_2_5  = 0x08, 
+    DDR1_CL_3    = 0x10, 
+    DDR1_CL_4    = 0x40, 
+    DDR1_CL_FAULT
+} MV_DIMM_DDR1_CAS;
+
+/* enumeration for DDR2 supported CAS Latencies */
+typedef enum _mvDimmDdr2Cas
+{
+    DDR2_CL_3    = 0x08, 
+    DDR2_CL_4    = 0x10, 
+    DDR2_CL_5    = 0x20, 
+    DDR2_CL_FAULT
+} MV_DIMM_DDR2_CAS;
+
+
+typedef struct _mvDramBankInfo
+{
+    MV_MEMORY_TYPE  memoryType; 	/* DDR1, DDR2 or SDRAM */
+
+    /* DIMM dimensions */
+    MV_U32  numOfRowAddr;
+    MV_U32  numOfColAddr;
+    MV_U32  dataWidth;
+    MV_U32  errorCheckType;             /* ECC , PARITY..*/
+    MV_U32  sdramWidth;                 /* 4,8,16 or 32 */
+    MV_U32  errorCheckDataWidth;        /* 0 - no, 1 - Yes */
+    MV_U32  burstLengthSupported;
+    MV_U32  numOfBanksOnEachDevice;
+    MV_U32  suportedCasLatencies;
+    MV_U32  refreshInterval;
+
+    /* DIMM timing parameters */
+    MV_U32  minCycleTimeAtMaxCasLatPs;	
+    MV_U32  minCycleTimeAtMaxCasLatMinus1Ps;
+    MV_U32  minCycleTimeAtMaxCasLatMinus2Ps;
+	MV_U32  minRowPrechargeTime;
+	MV_U32  minRowActiveToRowActive;
+	MV_U32  minRasToCasDelay;
+	MV_U32  minRasPulseWidth;
+    MV_U32  minWriteRecoveryTime;   /* DDR2 only */
+    MV_U32  minWriteToReadCmdDelay; /* DDR2 only */
+    MV_U32  minReadToPrechCmdDelay; /* DDR2 only */
+    MV_U32  minRefreshToActiveCmd;  /* DDR2 only */
+                      
+    /* Parameters calculated from the extracted DIMM information */
+    MV_U32  size;
+    MV_U32  deviceDensity;           	/* 16,64,128,256 or 512 Mbit */
+    MV_U32  numberOfDevices;
+
+    /* DIMM attributes (MV_TRUE for yes) */
+    MV_BOOL registeredAddrAndControlInputs;
+     
+}MV_DRAM_BANK_INFO;
+
+/* This structure describes CPU interface address decode window               */
+typedef struct _mvDramIfDecWin 
+{
+	MV_ADDR_WIN   addrWin;    /* An address window*/
+	MV_BOOL       enable;     /* Address decode window is enabled/disabled    */
+}MV_DRAM_DEC_WIN;
+
+#include "ddr1_2/mvDram.h"
+
+/* mvDramIf.h API list */
+MV_VOID   mvDramIfBasicAsmInit(MV_VOID);
+MV_STATUS mvDramIfDetect(MV_U32 forcedCl);
+MV_VOID   _mvDramIfConfig(MV_VOID);
+
+MV_STATUS mvDramIfWinSet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin);
+MV_STATUS mvDramIfWinGet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin);
+MV_STATUS mvDramIfWinEnable(MV_TARGET target,MV_BOOL enable);
+MV_32 mvDramIfBankSizeGet(MV_U32 bankNum);
+MV_32 mvDramIfBankBaseGet(MV_U32 bankNum);
+MV_32 mvDramIfSizeGet(MV_VOID);
+
+#if 0
+MV_STATUS mvDramIfMbusCtrlSet(MV_XBAR_TARGET *pPizzaArbArray);
+MV_STATUS mvDramIfMbusToutSet(MV_U32 timeout, MV_BOOL enable);
+#endif
+
+#endif /* __INCmvDramIfh */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIfConfig.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIfConfig.h
new file mode 100644
index 0000000000..a7c66444ac
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIfConfig.h
@@ -0,0 +1,192 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvDramIfConfigh
+#define __INCmvDramIfConfigh
+
+/* includes */
+
+/* defines  */
+
+/* registers defaults values */
+
+#define SDRAM_CONFIG_DV 				\
+		(SDRAM_PERR_WRITE			|	\
+		 SDRAM_SRMODE				|	\
+		 SDRAM_SRCLK_GATED)
+
+#define SDRAM_DUNIT_CTRL_LOW_DV			\
+		(SDRAM_CTRL_POS_RISE		|	\
+		 SDRAM_CLK1DRV_NORMAL		|	\
+		 SDRAM_LOCKEN_ENABLE)
+
+#define SDRAM_ADDR_CTRL_DV	    0
+		
+#define SDRAM_TIMING_CTRL_LOW_REG_DV 	\
+		((0x2 << SDRAM_TRCD_OFFS)	|	\
+		 (0x2 << SDRAM_TRP_OFFS)	|	\
+		 (0x1 << SDRAM_TWR_OFFS)	|	\
+		 (0x0 << SDRAM_TWTR_OFFS)	|	\
+		 (0x5 << SDRAM_TRAS_OFFS)	|	\
+		 (0x1 << SDRAM_TRRD_OFFS))
+/* TRFC 0x27, TW2W 0x1 */
+#define SDRAM_TIMING_CTRL_HIGH_REG_DV	(( 0x7 << SDRAM_TRFC_OFFS )	|\
+					( 0x2 << SDRAM_TRFC_EXT_OFFS)	|\
+					( 0x1 << SDRAM_TW2W_OFFS))
+
+#define SDRAM_OPEN_PAGES_CTRL_REG_DV	SDRAM_OPEN_PAGE_EN	
+
+/* DDR2 ODT default register values */
+
+/* Presence	     Ctrl Low    Ctrl High  Dunit Ctrl   Ext Mode     */
+/*	CS0	         0x84210000  0x00000000  0x0000780F  0x00000440 */
+/*	CS0+CS1          0x84210000  0x00000000  0x0000780F  0x00000440 */
+/*	CS0+CS2	    	 0x030C030C  0x00000000  0x0000740F  0x00000404 */
+/*	CS0+CS1+CS2	 0x030C030C  0x00000000  0x0000740F  0x00000404 */
+/*	CS0+CS2+CS3	 0x030C030C  0x00000000  0x0000740F  0x00000404 */
+/*	CS0+CS1+CS2+CS3  0x030C030C  0x00000000  0x0000740F  0x00000404 */
+
+#define DDR2_ODT_CTRL_LOW_CS0_DV	0x84210000
+#define DDR2_ODT_CTRL_HIGH_CS0_DV	0x00000000
+#define DDR2_DUNIT_ODT_CTRL_CS0_DV	0x0000780F
+#define DDR_SDRAM_EXT_MODE_CS0_DV	0x00000440
+
+#define DDR2_ODT_CTRL_LOW_CS0_CS2_DV	0x030C030C
+#define DDR2_ODT_CTRL_HIGH_CS0_CS2_DV	0x00000000
+#define DDR2_DUNIT_ODT_CTRL_CS0_CS2_DV	0x0000740F
+#define DDR_SDRAM_EXT_MODE_CS0_CS2_DV	0x00000404
+
+
+/* DDR SDRAM Adderss/Control and Data Pads Calibration default values */
+#define DDR1_ADDR_CTRL_PAD_STRENGTH_TYPICAL_DV	\
+		(1 << SDRAM_PRE_DRIVER_STRENGTH_OFFS)
+#define DDR2_ADDR_CTRL_PAD_STRENGTH_TYPICAL_DV	\
+		(3 << SDRAM_PRE_DRIVER_STRENGTH_OFFS)
+		
+		
+#define DDR1_DATA_PAD_STRENGTH_TYPICAL_DV		\
+		(1 << SDRAM_PRE_DRIVER_STRENGTH_OFFS)
+#define DDR2_DATA_PAD_STRENGTH_TYPICAL_DV		\
+		(3 << SDRAM_PRE_DRIVER_STRENGTH_OFFS)
+
+/* DDR SDRAM Mode Register default value */
+#define DDR1_MODE_REG_DV			0x00000000
+#define DDR2_MODE_REG_DV			0x00000400
+
+/* DDR SDRAM Timing parameter default values */
+#define DDR1_TIMING_LOW_DV           0x11602220
+#define DDR1_TIMING_HIGH_DV          0x0000000d
+
+#define DDR2_TIMING_LOW_DV           0x11812220
+#define DDR2_TIMING_HIGH_DV          0x0000030f
+
+/* For Guideline (GL# MEM-4) DQS Reference Delay Tuning */
+#define FTDLL_DDR1_166MHZ           ((0x1 << 0)    | \
+                                     (0x7F<< 12)   | \
+                                     (0x1 << 22))
+
+#define FTDLL_DDR1_133MHZ           FTDLL_DDR1_166MHZ
+
+#define FTDLL_DDR1_200MHZ           ((0x1 << 0)    | \
+                                     (0x1 << 12)   | \
+                                     (0x3 << 14)   | \
+                                     (0x1 << 18)   | \
+                                     (0x1 << 22))
+
+
+#define FTDLL_DDR2_166MHZ           ((0x1 << 0)    | \
+                                     (0x1 << 12)   | \
+                                     (0x1 << 14)   | \
+                                     (0x1 << 16)   | \
+                                     (0x1 << 19)   | \
+                                     (0xF << 20))
+
+#define FTDLL_DDR2_133MHZ           FTDLL_DDR2_166MHZ
+
+#define FTDLL_DDR2_200MHZ           ((0x1 << 0)    | \
+                                     (0x1 << 12)   | \
+                                     (0x1 << 14)   | \
+                                     (0x1 << 16)   | \
+                                     (0x1 << 19)   | \
+                                     (0xF << 20))
+
+#define FTDLL_DDR2_250MHZ            0x445001
+
+/* Orion 1 B1 and above */
+#define FTDLL_DDR1_166MHZ_5181_B1    0x45D001
+
+/* Orion nas */
+#define FTDLL_DDR2_166MHZ_5182       0x597001
+
+/* Orion 2 D0 and above */
+#define FTDLL_DDR1_166MHZ_5281_D0    0x8D0001
+#define FTDLL_DDR1_200MHZ_5281_D0    0x8D0001
+#define FTDLL_DDR2_166MHZ_5281_D0    0x485001
+#define FTDLL_DDR2_200MHZ_5281_D0    0x485001
+#define FTDLL_DDR2_250MHZ_5281_D0    0x445001
+#define FTDLL_DDR2_200MHZ_5281_D1    0x995001
+#define FTDLL_DDR2_250MHZ_5281_D1    0x984801
+
+#endif /* __INCmvDramIfh */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIfRegs.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIfRegs.h
new file mode 100644
index 0000000000..e9cd7c4e5d
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIfRegs.h
@@ -0,0 +1,306 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvDramIfRegsh
+#define __INCmvDramIfRegsh
+
+
+/* DDR SDRAM Controller Address Decode Registers */
+/* SDRAM CSn Base Address Register (SCBAR) */
+#define SDRAM_BASE_ADDR_REG(csNum)	(0x1500 + (csNum * 8))
+#define SCBAR_BASE_OFFS				16 
+#define SCBAR_BASE_MASK				(0xffff << SCBAR_BASE_OFFS)
+#define SCBAR_BASE_ALIGNMENT		0x10000 
+
+/* SDRAM CSn Size Register (SCSR) */		  
+#define SDRAM_SIZE_REG(csNum)	(0x1504 + (csNum * 8))
+#define SCSR_WIN_EN					BIT0
+#define SCSR_SIZE_OFFS				16
+#define SCSR_SIZE_MASK				(0xffff << SCSR_SIZE_OFFS)
+#define SCSR_SIZE_ALIGNMENT			0x10000
+
+/* configuration register */
+#define SDRAM_CONFIG_REG   		0x1400
+#define SDRAM_REFRESH_OFFS 		0
+#define SDRAM_REFRESH_MAX  		0x3000
+#define SDRAM_REFRESH_MASK 		(SDRAM_REFRESH_MAX << SDRAM_REFRESH_OFFS)
+#define SDRAM_DWIDTH_OFFS       14
+#define SDRAM_DWIDTH_MASK       (3 << SDRAM_DWIDTH_OFFS)
+#define SDRAM_DWIDTH_16BIT      (1 << SDRAM_DWIDTH_OFFS)
+#define SDRAM_DWIDTH_32BIT      (2 << SDRAM_DWIDTH_OFFS)
+#define SDRAM_DTYPE_OFFS        16
+#define SDRAM_DTYPE_MASK        (1 << SDRAM_DTYPE_OFFS)
+#define SDRAM_DTYPE_DDR1        (0 << SDRAM_DTYPE_OFFS)
+#define SDRAM_DTYPE_DDR2        (1 << SDRAM_DTYPE_OFFS)
+#define SDRAM_REGISTERED   		(1 << 17)
+#define SDRAM_PERR_OFFS    		18
+#define SDRAM_PERR_MASK    		(1 << SDRAM_PERR_OFFS)
+#define SDRAM_PERR_NO_WRITE     (0 << SDRAM_PERR_OFFS)
+#define SDRAM_PERR_WRITE        (1 << SDRAM_PERR_OFFS)
+#define SDRAM_DCFG_OFFS     	20
+#define SDRAM_DCFG_MASK     	(0x3 << SDRAM_DCFG_OFFS)
+#define SDRAM_DCFG_X16_DEV   	(1 << SDRAM_DCFG_OFFS)
+#define SDRAM_DCFG_X8_DEV   	(2 << SDRAM_DCFG_OFFS)
+#define SDRAM_SRMODE			(1 << 24)
+#define SDRAM_SRCLK_OFFS		25
+#define SDRAM_SRCLK_MASK		(1 << SDRAM_SRCLK_OFFS)
+#define SDRAM_SRCLK_KEPT		(0 << SDRAM_SRCLK_OFFS)
+#define SDRAM_SRCLK_GATED		(1 << SDRAM_SRCLK_OFFS)
+#define SDRAM_CATTH_OFFS		26
+#define SDRAM_CATTHR_EN			(1 << SDRAM_CATTH_OFFS)
+
+
+/* dunit control register */
+#define SDRAM_DUNIT_CTRL_REG  	0x1404
+#define SDRAM_CTRL_POS_OFFS	   	6
+#define SDRAM_CTRL_POS_FALL	   	(0 << SDRAM_CTRL_POS_OFFS)
+#define SDRAM_CTRL_POS_RISE	   	(1 << SDRAM_CTRL_POS_OFFS)
+#define SDRAM_CLK1DRV_OFFS      12
+#define SDRAM_CLK1DRV_MASK      (1 << SDRAM_CLK1DRV_OFFS)
+#define SDRAM_CLK1DRV_HIGH_Z    (0 << SDRAM_CLK1DRV_OFFS)
+#define SDRAM_CLK1DRV_NORMAL    (1 << SDRAM_CLK1DRV_OFFS)
+#define SDRAM_LOCKEN_OFFS       18
+#define SDRAM_LOCKEN_MASK       (1 << SDRAM_LOCKEN_OFFS)
+#define SDRAM_LOCKEN_DISABLE    (0 << SDRAM_LOCKEN_OFFS)
+#define SDRAM_LOCKEN_ENABLE     (1 << SDRAM_LOCKEN_OFFS)
+#define SDRAM_ST_BURST_DEL_OFFS 	24
+#define SDRAM_ST_BURST_DEL_MAX 	0xf
+#define SDRAM_ST_BURST_DEL_MASK (SDRAM_ST_BURST_DEL_MAX<<SDRAM_ST_BURST_DEL_OFFS)
+
+/* sdram timing control low register */
+#define SDRAM_TIMING_CTRL_LOW_REG	0x1408
+#define SDRAM_TRCD_OFFS 		4
+#define SDRAM_TRCD_MASK 		(0xF << SDRAM_TRCD_OFFS)
+#define SDRAM_TRP_OFFS 			8
+#define SDRAM_TRP_MASK 			(0xF << SDRAM_TRP_OFFS)
+#define SDRAM_TWR_OFFS 			12
+#define SDRAM_TWR_MASK 			(0xF << SDRAM_TWR_OFFS)
+#define SDRAM_TWTR_OFFS 		16
+#define SDRAM_TWTR_MASK 		(0xF << SDRAM_TWTR_OFFS)
+#define SDRAM_TRAS_OFFS 		20
+#define SDRAM_TRAS_MASK 		(0xF << SDRAM_TRAS_OFFS)
+#define SDRAM_TRRD_OFFS 		24
+#define SDRAM_TRRD_MASK 		(0xF << SDRAM_TRRD_OFFS)
+#define SDRAM_TRTP_OFFS 		28
+#define SDRAM_TRTP_MASK 		(0xF << SDRAM_TRTP_OFFS)
+
+/* sdram timing control high register */
+#define SDRAM_TIMING_CTRL_HIGH_REG	0x140c
+#define SDRAM_TRFC_OFFS 		0
+#define SDRAM_TRFC_MASK 		(0xF << SDRAM_TRFC_OFFS)
+#define SDRAM_TR2R_OFFS 		4
+#define SDRAM_TR2R_MASK 		(0x3 << SDRAM_TR2R_OFFS)
+#define SDRAM_TR2W_W2R_OFFS 		6
+#define SDRAM_TR2W_W2R_MASK 		(0x3 << SDRAM_TR2W_W2R_OFFS)
+#define SDRAM_TRFC_EXT_OFFS		8
+#define SDRAM_TRFC_EXT_MASK		(0x1 << SDRAM_TRFC_EXT_OFFS)
+#define SDRAM_TW2W_OFFS		    10
+#define SDRAM_TW2W_MASK		    (0x1 << SDRAM_TW2W_OFFS)
+
+/* address control register */
+#define SDRAM_ADDR_CTRL_REG		0x1410
+#define SDRAM_DSIZE_OFFS   	    4
+#define SDRAM_DSIZE_MASK   	    (0x3 << SDRAM_DSIZE_OFFS)
+#define SDRAM_DSIZE_128Mb 	    (0x0 << SDRAM_DSIZE_OFFS)
+#define SDRAM_DSIZE_256Mb 	    (0x1 << SDRAM_DSIZE_OFFS)
+#define SDRAM_DSIZE_512Mb  	    (0x2 << SDRAM_DSIZE_OFFS)
+
+/* SDRAM Open Pages Control registers */
+#define SDRAM_OPEN_PAGE_CTRL_REG	0x1414
+#define SDRAM_OPEN_PAGE_EN		    (0 << 0)
+#define SDRAM_OPEN_PAGE_DIS		    (1 << 0)
+
+/* sdram opertion register */
+#define SDRAM_OPERATION_REG 	0x1418
+#define SDRAM_CMD_OFFS  		0
+#define SDRAM_CMD_MASK   		(0x7 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_NORMAL 		(0x0 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_PRECHARGE_ALL (0x1 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_REFRESH_ALL 	(0x2 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_REG_SET_CMD 	(0x3 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_EXT_MODE_SET 	(0x4 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_NOP 			(0x5 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_SLF_RFRSH 	(0x7 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_EMRS2_CMD  	(0x8 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_EMRS3_CMD  	(0x9 << SDRAM_CMD_OFFS)
+
+/* sdram mode register */
+#define SDRAM_MODE_REG 			0x141c
+#define SDRAM_BURST_LEN_OFFS 	0
+#define SDRAM_BURST_LEN_MASK 	(0x7 << SDRAM_BURST_LEN_OFFS)
+#define SDRAM_BURST_LEN_4    	(0x2 << SDRAM_BURST_LEN_OFFS)
+#define SDRAM_CL_OFFS   		4
+#define SDRAM_CL_MASK   		(0x7 << SDRAM_CL_OFFS)
+#define SDRAM_DDR1_CL_2	     	(0x2 << SDRAM_CL_OFFS)
+#define SDRAM_DDR1_CL_3      	(0x3 << SDRAM_CL_OFFS)
+#define SDRAM_DDR1_CL_4      	(0x4 << SDRAM_CL_OFFS)
+#define SDRAM_DDR1_CL_1_5    	(0x5 << SDRAM_CL_OFFS)
+#define SDRAM_DDR1_CL_2_5    	(0x6 << SDRAM_CL_OFFS)
+#define SDRAM_DDR2_CL_3      	(0x3 << SDRAM_CL_OFFS)
+#define SDRAM_DDR2_CL_4      	(0x4 << SDRAM_CL_OFFS)
+#define SDRAM_DDR2_CL_5    		(0x5 << SDRAM_CL_OFFS)
+#define SDRAM_TM_OFFS           7
+#define SDRAM_TM_MASK           (1 << SDRAM_TM_OFFS)
+#define SDRAM_TM_NORMAL         (0 << SDRAM_TM_OFFS)
+#define SDRAM_TM_TEST_MODE      (1 << SDRAM_TM_OFFS)
+#define SDRAM_DLL_OFFS          8
+#define SDRAM_DLL_MASK          (1 << SDRAM_DLL_OFFS)
+#define SDRAM_DLL_NORMAL        (0 << SDRAM_DLL_OFFS)
+#define SDRAM_DLL_RESET 	(1 << SDRAM_DLL_OFFS)
+#define SDRAM_WR_OFFS		11
+#define SDRAM_WR_MAX		7
+#define SDRAM_WR_MASK		(SDRAM_WR_MAX << SDRAM_WR_OFFS)
+#define SDRAM_PD_OFFS		12
+#define SDRAM_PD_MASK		(1 << SDRAM_PD_OFFS) 
+#define SDRAM_PD_FAST_EXIT	(0 << SDRAM_PD_OFFS) 
+#define SDRAM_PD_SLOW_EXIT	(1 << SDRAM_PD_OFFS) 
+
+/* DDR SDRAM Extended Mode register (DSEMR) */
+#define SDRAM_EXTENDED_MODE_REG	0x1420
+#define DSEMR_DLL_ENABLE		(1 << 0)
+#define DSEMR_DS_OFFS			1
+#define DSEMR_DS_MASK			(1 << DSEMR_DS_OFFS)
+#define DSEMR_DS_NORMAL			(0 << DSEMR_DS_OFFS)
+#define DSEMR_DS_REDUCED		(1 << DSEMR_DS_OFFS)
+#define DSEMR_RTT0_OFFS			2
+#define DSEMR_RTT1_OFFS			6
+#define DSEMR_RTT_ODT_DISABLE	((0 << DSEMR_RTT0_OFFS)||(0 << DSEMR_RTT1_OFFS))
+#define DSEMR_RTT_ODT_75_OHM	((1 << DSEMR_RTT0_OFFS)||(0 << DSEMR_RTT1_OFFS))
+#define DSEMR_RTT_ODT_150_OHM	((0 << DSEMR_RTT0_OFFS)||(1 << DSEMR_RTT1_OFFS))
+#define DSEMR_OCD_OFFS			7
+#define DSEMR_OCD_MASK			(0x7 << DSEMR_OCD_OFFS)
+#define DSEMR_OCD_EXIT_CALIB	(0 << DSEMR_OCD_OFFS)
+#define DSEMR_OCD_DRIVE1		(1 << DSEMR_OCD_OFFS)
+#define DSEMR_OCD_DRIVE0		(2 << DSEMR_OCD_OFFS)
+#define DSEMR_OCD_ADJUST_MODE	(4 << DSEMR_OCD_OFFS)
+#define DSEMR_OCD_CALIB_DEFAULT	(7 << DSEMR_OCD_OFFS)
+#define DSEMR_DQS_OFFS			10
+#define DSEMR_DQS_MASK			(1 << DSEMR_DQS_OFFS)
+#define DSEMR_DQS_DIFFERENTIAL	(0 << DSEMR_DQS_OFFS)
+#define DSEMR_DQS_SINGLE_ENDED	(0 << DSEMR_DQS_OFFS)
+#define DSEMR_RDQS_ENABLE		(1 << 11)
+#define DSEMR_QOFF_OUTPUT_BUFF_EN	(1 << 12)
+
+/* DDR SDRAM Operation Control Register */
+#define SDRAM_OPERATION_CTRL_REG	0x142c
+
+/* Dunit FTDLL Configuration Register */
+#define SDRAM_FTDLL_CONFIG_REG			0x1484
+  
+/* Pads Calibration register */
+#define SDRAM_ADDR_CTRL_PADS_CAL_REG	0x14c0
+#define SDRAM_DATA_PADS_CAL_REG		0x14c4
+#define SDRAM_DRVN_OFFS 				0
+#define SDRAM_DRVN_MASK 				(0x3F << SDRAM_DRVN_OFFS)
+#define SDRAM_DRVP_OFFS 				6
+#define SDRAM_DRVP_MASK 				(0x3F << SDRAM_DRVP_OFFS)
+#define SDRAM_PRE_DRIVER_STRENGTH_OFFS	12
+#define SDRAM_PRE_DRIVER_STRENGTH_MASK	(3 << SDRAM_PRE_DRIVER_STRENGTH_OFFS)
+#define SDRAM_TUNE_EN   		BIT16
+#define SDRAM_LOCK_OFFS 		17
+#define SDRAM_LOCK_MAKS 		(0x1F << SDRAM_LOCK_OFFS)
+#define SDRAM_LOCKN_OFFS 		17
+#define SDRAM_LOCKN_MAKS 		(0x3F << SDRAM_LOCKN_OFFS)
+#define SDRAM_LOCKP_OFFS 		23
+#define SDRAM_LOCKP_MAKS 		(0x3F << SDRAM_LOCKP_OFFS)
+#define SDRAM_WR_EN     		(1 << 31)
+
+/* DDR2 SDRAM ODT Control (Low) Register (DSOCLR) */
+#define DDR2_SDRAM_ODT_CTRL_LOW_REG  0x1494
+#define DSOCLR_ODT_RD_OFFS(odtNum)   (odtNum * 4)
+#define DSOCLR_ODT_RD_MASK(odtNum)   (0xf << DSOCLR_ODT_RD_OFFS(odtNum))
+#define DSOCLR_ODT_RD(odtNum, bank)  ((1 << bank) << DSOCLR_ODT_RD_OFFS(odtNum))
+#define DSOCLR_ODT_WR_OFFS(odtNum)   (16 + (odtNum * 4))
+#define DSOCLR_ODT_WR_MASK(odtNum)   (0xf << DSOCLR_ODT_WR_OFFS(odtNum))
+#define DSOCLR_ODT_WD(odtNum, bank)  ((1 << bank) << DSOCLR_ODT_WR_OFFS(odtNum))
+
+/* DDR2 SDRAM ODT Control (High) Register (DSOCHR) */
+#define DDR2_SDRAM_ODT_CTRL_HIGH_REG    0x1498
+/* Optional control values to DSOCHR_ODT_EN macro */
+#define DDR2_ODT_CTRL_DUNIT         0
+#define DDR2_ODT_CTRL_NEVER         1
+#define DDR2_ODT_CTRL_ALWAYS        3
+#define DSOCHR_ODT_EN_OFFS(odtNum)  (odtNum * 2)
+#define DSOCHR_ODT_EN_MASK(odtNum)  (0x3 << DSOCHR_ODT_EN_OFFS(odtNum))
+#define DSOCHR_ODT_EN(odtNum, ctrl) ((1 << ctrl) << DSOCHR_ODT_RD_OFFS(odtNum))
+
+/* DDR2 Dunit ODT Control Register (DDOCR)*/
+#define DDR2_DUNIT_ODT_CONTROL_REG  0x149c
+#define DDOCR_ODT_RD_OFFS           0
+#define DDOCR_ODT_RD_MASK           (0xf << DDOCR_ODT_RD_OFFS)
+#define DDOCR_ODT_RD(bank)          ((1 << bank) << DDOCR_ODT_RD_OFFS)
+#define DDOCR_ODT_WR_OFFS           4
+#define DDOCR_ODT_WR_MASK           (0xf << DDOCR_ODT_WR_OFFS)
+#define DDOCR_ODT_WR(bank)          ((1 << bank) << DDOCR_ODT_WR_OFFS)
+#define DSOCR_ODT_EN_OFFS           8
+#define DSOCR_ODT_EN_MASK           (0x3 << DSOCR_ODT_EN_OFFS)
+#define DSOCR_ODT_EN(ctrl)          ((1 << ctrl) << DSOCR_ODT_EN_OFFS)
+#define DSOCR_ODT_SEL_OFFS          10
+#define DSOCR_ODT_SEL_MASK          (0x3 << DSOCR_ODT_SEL_OFFS)
+
+/* DDR SDRAM Initialization Control Register (DSICR) */
+#define DDR_SDRAM_INIT_CTRL_REG		0x1480
+#define DSICR_INIT_EN				(1 << 0)
+
+#endif /* __INCmvDramIfRegsh */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIf.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIf.c
new file mode 100644
index 0000000000..a214c95cd1
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIf.c
@@ -0,0 +1,1855 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+/* includes */
+#include "ddr2/mvDramIf.h"
+#include "ctrlEnv/sys/mvCpuIf.h"
+
+#include "ddr2/mvDramIfStaticInit.h"
+
+/* #define MV_DEBUG */
+#ifdef MV_DEBUG
+#define DB(x) x
+#else
+#define DB(x)
+#endif
+
+/* DRAM bank presence encoding */
+#define BANK_PRESENT_CS0			    0x1
+#define BANK_PRESENT_CS0_CS1			0x3
+#define BANK_PRESENT_CS0_CS2			0x5
+#define BANK_PRESENT_CS0_CS1_CS2		0x7
+#define BANK_PRESENT_CS0_CS2_CS3		0xd
+#define BANK_PRESENT_CS0_CS2_CS3_CS4	0xf
+
+/* locals   */
+#ifndef MV_STATIC_DRAM_ON_BOARD
+static void sdramDDr2OdtConfig(MV_DRAM_BANK_INFO *pBankInfo);
+static MV_U32 dunitCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 minCas, MV_U32  busClk, MV_STATUS TTmode );
+static MV_U32 dunitCtrlHighRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32  busClk);
+static MV_U32 sdramModeRegCalc(MV_U32 minCas);
+static MV_U32 sdramExtModeRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk);
+static MV_U32 sdramAddrCtrlRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_DRAM_BANK_INFO *pBankInfoDIMM1);
+static MV_U32 sdramConfigRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_DRAM_BANK_INFO *pBankInfo2, MV_U32 busClk);
+static MV_U32 minCasCalc(MV_DRAM_BANK_INFO *pBankInfo,MV_DRAM_BANK_INFO *pBankInfo2, MV_U32 busClk, MV_U32 forcedCl);
+static MV_U32 sdramTimeCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 minCas, MV_U32 busClk);
+static MV_U32 sdramTimeCtrlHighRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk);
+static MV_U32 sdramDdr2TimeLoRegCalc(MV_U32 minCas);
+static MV_U32 sdramDdr2TimeHiRegCalc(MV_U32 minCas);
+#endif
+MV_32 DRAM_CS_Order[MV_DRAM_MAX_CS] = {N_A
+
+#ifdef MV_INCLUDE_SDRAM_CS1
+		,N_A
+#endif
+#ifdef MV_INCLUDE_SDRAM_CS2
+		,N_A
+#endif
+#ifdef MV_INCLUDE_SDRAM_CS3
+    ,N_A
+#endif
+	};
+/* Get DRAM size of CS num */
+MV_U32 mvDramCsSizeGet(MV_U32 csNum)
+{
+	MV_DRAM_BANK_INFO bankInfo;
+	MV_U32  size, deviceW, dimmW;
+#ifdef MV78XX0	
+	MV_U32  temp;
+#endif
+
+	if(MV_OK == mvDramBankInfoGet(csNum, &bankInfo))
+	{
+        	if (0 == bankInfo.size)
+			return 0;
+
+		/* Note that the Dimm width might be different then the device DRAM width */
+#ifdef MV78XX0	
+		temp = MV_REG_READ(SDRAM_CONFIG_REG);
+		deviceW = ((temp & SDRAM_DWIDTH_MASK) == SDRAM_DWIDTH_32BIT )? 32 : 64;
+#else
+		deviceW = 16 /* KW family */;
+#endif
+		dimmW = bankInfo.dataWidth - (bankInfo.dataWidth % 16);
+		size = ((bankInfo.size << 20) / (dimmW/deviceW)); 
+		return size;
+	}
+	else
+		return 0;
+}
+/*******************************************************************************
+* mvDramIfDetect - Prepare DRAM interface configuration values.
+*
+* DESCRIPTION:
+*       This function implements the full DRAM detection and timing 
+*       configuration for best system performance.
+*       Since this routine runs from a ROM device (Boot Flash), its stack 
+*       resides on RAM, that might be the system DRAM. Changing DRAM 
+*       configuration values while keeping vital data in DRAM is risky. That
+*       is why the function does not preform the configuration setting but 
+*       prepare those in predefined 32bit registers (in this case IDMA 
+*       registers are used) for other routine to perform the settings.
+*       The function will call for board DRAM SPD information for each DRAM 
+*       chip select. The function will then analyze those SPD parameters of 
+*       all DRAM banks in order to decide on DRAM configuration compatible 
+*       for all DRAM banks.
+*       The function will set the CPU DRAM address decode registers.
+*       Note: This routine prepares values that will overide configuration of
+*       mvDramBasicAsmInit().
+*       
+* INPUT:
+*       forcedCl - Forced CAL Latency. If equal to zero, do not force.
+*       eccDisable - Force down the ECC.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+MV_STATUS mvDramIfDetect(MV_U32 forcedCl, MV_BOOL eccDisable)
+{
+	MV_32 	MV_DRAM_CS_order[MV_DRAM_MAX_CS] = {
+		SDRAM_CS0
+#ifdef MV_INCLUDE_SDRAM_CS1
+		,SDRAM_CS1
+#endif
+#ifdef MV_INCLUDE_SDRAM_CS2
+		,SDRAM_CS2
+#endif
+#ifdef MV_INCLUDE_SDRAM_CS3
+		,SDRAM_CS3
+#endif
+		};
+	MV_U32  busClk, deviceW, dimmW;
+	MV_U32 numOfAllDevices = 0;
+	MV_STATUS TTMode; 
+#ifndef MV_STATIC_DRAM_ON_BOARD
+	MV_DRAM_BANK_INFO bankInfo[MV_DRAM_MAX_CS];
+	MV_U32  size, base = 0, i, j, temp, busClkPs;
+	MV_U8	minCas;
+	MV_CPU_DEC_WIN dramDecWin;
+	dramDecWin.addrWin.baseHigh = 0;
+#endif
+
+	busClk = mvBoardSysClkGet();
+
+	if (0 == busClk)
+	{
+		mvOsPrintf("Dram: ERR. Can't detect system clock! \n");
+		return MV_ERROR;
+	}
+	
+#ifndef MV_STATIC_DRAM_ON_BOARD
+
+	busClkPs = 1000000000 / (busClk / 1000);  /* in ps units */
+	/* we will use bank 0 as the representative of the all the DRAM banks,  */
+	/* since bank 0 must exist.                                             */	
+	for(i = 0; i < MV_DRAM_MAX_CS; i++)
+	{ 
+		/* if Bank exist */
+		if(MV_OK == mvDramBankInfoGet(i, &bankInfo[i]))
+		{
+			DB(mvOsPrintf("Dram: Find bank %d\n", i));
+			/* check it isn't SDRAM */
+			if(bankInfo[i].memoryType != MEM_TYPE_DDR2)
+			{
+				mvOsOutput("Dram: ERR. SDRAM type not supported !!!\n");
+				return MV_ERROR;
+			}
+
+            		/* All banks must support the Mclk freqency */
+			if(bankInfo[i].minCycleTimeAtMaxCasLatPs > busClkPs)
+			{
+				mvOsOutput("Dram: ERR. Bank %d doesn't support memory clock!!!\n", i);
+				return MV_ERROR;
+			}
+
+			/* All banks must support registry in order to activate it */
+			if(bankInfo[i].registeredAddrAndControlInputs != 
+			   bankInfo[0].registeredAddrAndControlInputs)
+			{
+				mvOsOutput("Dram: ERR. different Registered settings !!!\n");
+				return MV_ERROR;
+			}
+
+			/* All banks must support same ECC mode */
+			if(bankInfo[i].errorCheckType != 
+			   bankInfo[0].errorCheckType)
+			{
+				mvOsOutput("Dram: ERR. different ECC settings !!!\n");
+				return MV_ERROR;
+			}
+
+		}
+		else
+		{
+			if( i == 0 ) /* bank 0 doesn't exist */
+			{
+				mvOsOutput("Dram: ERR. Fail to detect bank 0 !!!\n");
+				return MV_ERROR;
+			}
+			else
+			{
+				DB(mvOsPrintf("Dram: Could not find bank %d\n", i));
+				bankInfo[i].size = 0;     /* Mark this bank as non exist */
+			}
+		}
+	}
+
+#ifdef MV_INCLUDE_SDRAM_CS2
+	if (bankInfo[SDRAM_CS0].size <  bankInfo[SDRAM_CS2].size)
+	{
+		MV_DRAM_CS_order[0] = SDRAM_CS2;
+		MV_DRAM_CS_order[1] = SDRAM_CS3;
+		MV_DRAM_CS_order[2] = SDRAM_CS0;
+		MV_DRAM_CS_order[3] = SDRAM_CS1;
+		DRAM_CS_Order[0] = SDRAM_CS2;
+		DRAM_CS_Order[1] = SDRAM_CS3;
+		DRAM_CS_Order[2] = SDRAM_CS0;
+		DRAM_CS_Order[3] = SDRAM_CS1;
+
+	}
+	else
+#endif
+	{
+		MV_DRAM_CS_order[0] = SDRAM_CS0;
+		MV_DRAM_CS_order[1] = SDRAM_CS1;
+		DRAM_CS_Order[0] = SDRAM_CS0;
+		DRAM_CS_Order[1] = SDRAM_CS1;
+#ifdef MV_INCLUDE_SDRAM_CS2
+		MV_DRAM_CS_order[2] = SDRAM_CS2;
+		MV_DRAM_CS_order[3] = SDRAM_CS3;
+		DRAM_CS_Order[2] = SDRAM_CS2;
+		DRAM_CS_Order[3] = SDRAM_CS3;
+#endif
+	}
+
+	for(j = 0; j < MV_DRAM_MAX_CS; j++)
+	{
+		i = MV_DRAM_CS_order[j];
+		
+        	if (0 == bankInfo[i].size)
+			continue;
+
+			/* Init the CPU window decode */
+			/* Note that the Dimm width might be different then the device DRAM width */
+#ifdef MV78XX0	
+			temp = MV_REG_READ(SDRAM_CONFIG_REG);
+			deviceW = ((temp & SDRAM_DWIDTH_MASK) == SDRAM_DWIDTH_32BIT )? 32 : 64;
+#else
+			deviceW = 16 /* KW family */;
+#endif
+			dimmW = bankInfo[0].dataWidth - (bankInfo[0].dataWidth % 16);
+			size = ((bankInfo[i].size << 20) / (dimmW/deviceW)); 
+		
+			/* We can not change DRAM window settings while excecuting  	*/
+			/* code from it. That is why we skip the DRAM CS[0], saving     */
+			/* it to the ROM configuration routine				*/
+
+			numOfAllDevices += bankInfo[i].numberOfDevices;
+			if (i == MV_DRAM_CS_order[0])
+			{
+				MV_U32 sizeToReg;
+				/* Translate the given window size to register format		*/
+				sizeToReg = ctrlSizeToReg(size, SCSR_SIZE_ALIGNMENT);
+				/* Size parameter validity check.                           */
+				if (-1 == sizeToReg)
+				{
+					mvOsOutput("DRAM: mvCtrlAddrDecToReg: ERR. Win %d size invalid.\n"
+							   ,i);
+					return MV_BAD_PARAM;
+				}
+
+				DB(mvOsPrintf("Dram: Bank 0 Size - %x\n",sizeToReg);)
+				sizeToReg = (sizeToReg << SCSR_SIZE_OFFS);
+				sizeToReg |= SCSR_WIN_EN;
+				MV_REG_WRITE(DRAM_BUF_REG0, sizeToReg);
+			}
+			else
+			{
+				dramDecWin.addrWin.baseLow = base;
+				dramDecWin.addrWin.size = size;
+				dramDecWin.enable = MV_TRUE;
+				DB(mvOsPrintf("Dram: Enable window %d base 0x%x, size=0x%x\n",i, base, size));
+				
+				/* Check if the DRAM size is more then 3GByte */
+				if (base < 0xC0000000)
+				{
+					DB(mvOsPrintf("Dram: Enable window %d base 0x%x, size=0x%x\n",i, base, size));
+           			if (MV_OK != mvCpuIfTargetWinSet(i, &dramDecWin))
+					{
+						mvOsPrintf("Dram: ERR. Fail to set bank %d!!!\n", SDRAM_CS0 + i);
+						return 	MV_ERROR;
+					}
+				}
+			}
+			
+			base += size;
+
+			/* update the suportedCasLatencies mask */
+			bankInfo[0].suportedCasLatencies &= bankInfo[i].suportedCasLatencies;
+	}
+
+	/* calculate minimum CAS */
+	minCas = minCasCalc(&bankInfo[0], &bankInfo[2], busClk, forcedCl);
+	if (0 == minCas) 
+	{
+		mvOsOutput("Dram: Warn: Could not find CAS compatible to SysClk %dMhz\n",
+				   (busClk / 1000000));
+
+		minCas = DDR2_CL_4; /* Continue with this CAS */
+		mvOsOutput("Set default CAS latency 4\n");
+	}
+
+	/* calc SDRAM_CONFIG_REG  and save it to temp register */
+	temp = sdramConfigRegCalc(&bankInfo[0],&bankInfo[2], busClk);
+	if(-1 == temp)
+	{
+		mvOsOutput("Dram: ERR. sdramConfigRegCalc failed !!!\n");
+		return MV_ERROR;
+	}
+
+	/* check if ECC is enabled by the user */
+	if(eccDisable)	
+	{	
+		/* turn off ECC*/
+		temp &= ~BIT18;
+	}
+	DB(mvOsPrintf("Dram: sdramConfigRegCalc - %x\n",temp);)
+	MV_REG_WRITE(DRAM_BUF_REG1, temp);
+	
+	/* calc SDRAM_MODE_REG  and save it to temp register */ 
+	temp = sdramModeRegCalc(minCas);
+    	if(-1 == temp)
+	{
+		mvOsOutput("Dram: ERR. sdramModeRegCalc failed !!!\n");
+		return MV_ERROR;
+	}
+	DB(mvOsPrintf("Dram: sdramModeRegCalc - %x\n",temp);)
+	MV_REG_WRITE(DRAM_BUF_REG2, temp);
+
+	/* calc SDRAM_EXTENDED_MODE_REG  and save it to temp register */ 
+	temp = sdramExtModeRegCalc(&bankInfo[0], busClk);
+	if(-1 == temp)
+	{
+		mvOsOutput("Dram: ERR. sdramExtModeRegCalc failed !!!\n");
+		return MV_ERROR;
+	}
+	DB(mvOsPrintf("Dram: sdramExtModeRegCalc - %x\n",temp);)
+	MV_REG_WRITE(DRAM_BUF_REG10, temp);
+
+	/* calc D_UNIT_CONTROL_LOW  and save it to temp register */
+	TTMode = MV_FALSE;
+	DB(mvOsPrintf("Dram: numOfAllDevices = %x\n",numOfAllDevices);)
+	if( (numOfAllDevices > 9) && (bankInfo[0].registeredAddrAndControlInputs == MV_FALSE) )
+	{
+		if ( ( (numOfAllDevices > 9) && (busClk > MV_BOARD_SYSCLK_200MHZ) ) ||
+			(numOfAllDevices > 18) )
+		{
+			mvOsOutput("Enable 2T ");
+			TTMode = MV_TRUE;
+		}
+	}
+
+  	temp = dunitCtrlLowRegCalc(&bankInfo[0], minCas, busClk, TTMode ); 
+   	if(-1 == temp)
+	{
+		mvOsOutput("Dram: ERR. dunitCtrlLowRegCalc failed !!!\n");
+		return MV_ERROR;
+	}
+	DB(mvOsPrintf("Dram: dunitCtrlLowRegCalc - %x\n",temp);)
+  	MV_REG_WRITE(DRAM_BUF_REG3, temp); 
+
+	/* calc D_UNIT_CONTROL_HIGH  and save it to temp register */
+  	temp = dunitCtrlHighRegCalc(&bankInfo[0], busClk); 
+   	if(-1 == temp)
+	{
+		mvOsOutput("Dram: ERR. dunitCtrlHighRegCalc failed !!!\n");
+		return MV_ERROR;
+	}
+	DB(mvOsPrintf("Dram: dunitCtrlHighRegCalc - %x\n",temp);)
+	/* check if ECC is enabled by the user */
+	if(eccDisable)	
+	{	
+		/* turn off sample stage if no ecc */
+		temp &= ~SDRAM__D2P_EN;;
+	}
+  	MV_REG_WRITE(DRAM_BUF_REG13, temp); 
+
+	/* calc SDRAM_ADDR_CTRL_REG  and save it to temp register */
+	temp = sdramAddrCtrlRegCalc(&bankInfo[0],&bankInfo[2]);
+    	if(-1 == temp)
+	{
+		mvOsOutput("Dram: ERR. sdramAddrCtrlRegCalc failed !!!\n");
+		return MV_ERROR;
+	}
+	DB(mvOsPrintf("Dram: sdramAddrCtrlRegCalc - %x\n",temp);)
+	MV_REG_WRITE(DRAM_BUF_REG4, temp);
+
+	/* calc SDRAM_TIMING_CTRL_LOW_REG  and save it to temp register */
+	temp = sdramTimeCtrlLowRegCalc(&bankInfo[0], minCas, busClk);
+    	if(-1 == temp)
+	{
+		mvOsOutput("Dram: ERR. sdramTimeCtrlLowRegCalc failed !!!\n");
+		return MV_ERROR;
+	}
+	DB(mvOsPrintf("Dram: sdramTimeCtrlLowRegCalc - %x\n",temp);)
+	MV_REG_WRITE(DRAM_BUF_REG5, temp);
+
+	/* calc SDRAM_TIMING_CTRL_HIGH_REG  and save it to temp register */
+	temp = sdramTimeCtrlHighRegCalc(&bankInfo[0], busClk);
+    	if(-1 == temp)
+	{
+		mvOsOutput("Dram: ERR. sdramTimeCtrlHighRegCalc failed !!!\n");
+		return MV_ERROR;
+	}
+	DB(mvOsPrintf("Dram: sdramTimeCtrlHighRegCalc - %x\n",temp);)
+	MV_REG_WRITE(DRAM_BUF_REG6, temp);
+
+	sdramDDr2OdtConfig(bankInfo);
+
+	/* calc DDR2_SDRAM_TIMING_LOW_REG  and save it to temp register */
+	temp = sdramDdr2TimeLoRegCalc(minCas);
+	if(-1 == temp)
+	{
+		mvOsOutput("Dram: ERR. sdramDdr2TimeLoRegCalc failed !!!\n");
+		return MV_ERROR;
+	}
+	DB(mvOsPrintf("Dram: sdramDdr2TimeLoRegCalc - %x\n",temp);)
+	MV_REG_WRITE(DRAM_BUF_REG11, temp);
+
+	/* calc DDR2_SDRAM_TIMING_HIGH_REG  and save it to temp register */
+	temp = sdramDdr2TimeHiRegCalc(minCas);
+	if(-1 == temp)
+	{
+		mvOsOutput("Dram: ERR. sdramDdr2TimeHiRegCalc failed !!!\n");
+		return MV_ERROR;
+	}
+	DB(mvOsPrintf("Dram: sdramDdr2TimeHiRegCalc - %x\n",temp);)
+	MV_REG_WRITE(DRAM_BUF_REG12, temp);
+#endif
+	
+	/* Note that DDR SDRAM Address/Control and Data pad calibration     */
+	/* settings is done in mvSdramIfConfig.s                            */
+
+ 	return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvDramIfBankBaseGet - Get DRAM interface bank base.
+*
+* DESCRIPTION:
+*       This function returns the 32 bit base address of a given DRAM bank.
+*
+* INPUT:
+*       bankNum - Bank number.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       DRAM bank size. If bank is disabled or paramter is invalid, the 
+*		function returns -1.
+*
+*******************************************************************************/
+MV_U32 mvDramIfBankBaseGet(MV_U32 bankNum)
+{
+	DB(mvOsPrintf("Dram: mvDramIfBankBaseGet Bank %d base addr is %x \n",
+				  bankNum, mvCpuIfTargetWinBaseLowGet(SDRAM_CS0 + bankNum)));
+	return mvCpuIfTargetWinBaseLowGet(SDRAM_CS0 + bankNum);
+}
+
+/*******************************************************************************
+* mvDramIfBankSizeGet - Get DRAM interface bank size.
+*
+* DESCRIPTION:
+*       This function returns the size of a given DRAM bank.
+*
+* INPUT:
+*       bankNum - Bank number.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       DRAM bank size. If bank is disabled the function return '0'. In case 
+*		or paramter is invalid, the function returns -1.
+*
+*******************************************************************************/
+MV_U32 mvDramIfBankSizeGet(MV_U32 bankNum)
+{
+	DB(mvOsPrintf("Dram: mvDramIfBankSizeGet Bank %d size is %x \n",
+				  bankNum, mvCpuIfTargetWinSizeGet(SDRAM_CS0 + bankNum)));
+	return mvCpuIfTargetWinSizeGet(SDRAM_CS0 + bankNum);
+}
+
+
+/*******************************************************************************
+* mvDramIfSizeGet - Get DRAM interface total size.
+*
+* DESCRIPTION:
+*       This function get the DRAM total size.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       DRAM total size. In case or paramter is invalid, the function 
+*		returns -1.
+*
+*******************************************************************************/
+MV_U32 mvDramIfSizeGet(MV_VOID)
+{
+	MV_U32 size = 0, i;
+	
+	for(i = 0; i < MV_DRAM_MAX_CS; i++)
+		size += mvDramIfBankSizeGet(i);
+	
+	DB(mvOsPrintf("Dram: mvDramIfSizeGet size is %x \n",size));
+	return size;
+}
+
+/*******************************************************************************
+* mvDramIfSingleBitErrThresholdSet - Set single bit ECC threshold.
+*
+* DESCRIPTION:
+*       The ECC single bit error threshold is the number of single bit 
+*       errors to happen before the Dunit generates an interrupt.
+*       This function set single bit ECC threshold.
+*
+* INPUT:
+*       threshold - threshold.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_BAD_PARAM if threshold is to big, MV_OK otherwise.
+*
+*******************************************************************************/
+MV_STATUS mvDramIfSingleBitErrThresholdSet(MV_U32 threshold)
+{
+    MV_U32 regVal; 
+
+    if (threshold > SECR_THRECC_MAX)
+    {
+        return MV_BAD_PARAM;
+    }
+
+    regVal = MV_REG_READ(SDRAM_ECC_CONTROL_REG);
+    regVal &= ~SECR_THRECC_MASK;
+    regVal |= ((SECR_THRECC(threshold) & SECR_THRECC_MASK));
+    MV_REG_WRITE(SDRAM_ECC_CONTROL_REG, regVal);
+
+    return MV_OK;
+}
+
+#ifndef MV_STATIC_DRAM_ON_BOARD
+/*******************************************************************************
+* minCasCalc - Calculate the Minimum CAS latency which can be used.
+*
+* DESCRIPTION:
+*	Calculate the minimum CAS latency that can be used, base on the DRAM
+*	parameters and the SDRAM bus Clock freq.
+*
+* INPUT:
+*	busClk    - the DRAM bus Clock.
+*	pBankInfo - bank info parameters.
+*	forcedCl - Forced CAS Latency multiplied by 10. If equal to zero, do not force.
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       The minimum CAS Latency. The function returns 0 if max CAS latency
+*		supported by banks is incompatible with system bus clock frequancy.
+*
+*******************************************************************************/
+
+static MV_U32 minCasCalc(MV_DRAM_BANK_INFO *pBankInfo,MV_DRAM_BANK_INFO *pBankInfo2, MV_U32 busClk, MV_U32 forcedCl)
+{
+	MV_U32 count = 1, j;
+	MV_U32 busClkPs = 1000000000 / (busClk / 1000);  /* in ps units */
+	MV_U32 startBit, stopBit;
+	MV_U32 minCas0 = 0, minCas2 = 0;
+	
+	
+	/*     DDR 2:
+			*******-******-******-******-******-******-******-******* 
+			* bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * 
+			*******-******-******-******-******-******-******-******* 
+	CAS	=	* TBD  | TBD  |  5   |  4   |  3   |  2   | TBD  | TBD  * 
+	Disco VI=	* TBD  | TBD  |  5   |  4   |  3   |  TBD   | TBD | TBD * 
+	Disco Duo=	* TBD  |   6  |  5   |  4   |  3   |  TBD   | TBD | TBD * 
+			*********************************************************/
+	
+	
+	/* If we are asked to use the forced CAL  we change the suported CAL to be forcedCl only */
+	if (forcedCl)
+	{
+		mvOsOutput("DRAM: Using forced CL %d.%d\n", (forcedCl / 10), (forcedCl % 10));
+	
+			if (forcedCl == 30)
+				pBankInfo->suportedCasLatencies = 0x08;
+			else if (forcedCl == 40)
+				pBankInfo->suportedCasLatencies = 0x10;
+			else if (forcedCl == 50)
+				pBankInfo->suportedCasLatencies = 0x20;
+			else if (forcedCl == 60)
+				pBankInfo->suportedCasLatencies = 0x40;
+			else
+			{
+				mvOsPrintf("Forced CL %d.%d not supported. Set default CL 4\n", 
+						   (forcedCl / 10), (forcedCl % 10));
+				pBankInfo->suportedCasLatencies = 0x10;
+			}
+
+		return pBankInfo->suportedCasLatencies;        
+	}   
+	
+	/* go over the supported cas mask from Max Cas down and check if the 	*/
+	/* SysClk stands in its time requirments.				*/
+
+	DB(mvOsPrintf("Dram: minCasCalc supported mask = %x busClkPs = %x \n",
+								pBankInfo->suportedCasLatencies,busClkPs ));
+	count = 1;
+	for(j = 7; j > 0; j--)
+	{
+		if((pBankInfo->suportedCasLatencies >> j) & BIT0 )
+		{
+			/* Reset the bits for CL incompatible for the sysClk */
+			switch (count)
+			{
+				case 1: 
+					if (pBankInfo->minCycleTimeAtMaxCasLatPs > busClkPs) 
+						pBankInfo->suportedCasLatencies &= ~(BIT0 << j);
+					count++;
+					break;
+				case 2: 
+					if (pBankInfo->minCycleTimeAtMaxCasLatMinus1Ps > busClkPs)
+						pBankInfo->suportedCasLatencies &= ~(BIT0 << j);
+					count++;
+					break;
+				case 3: 
+					if (pBankInfo->minCycleTimeAtMaxCasLatMinus2Ps > busClkPs)
+						pBankInfo->suportedCasLatencies &= ~(BIT0 << j);
+					count++;
+					break;
+				default: 
+					pBankInfo->suportedCasLatencies &= ~(BIT0 << j);
+					break;
+			}
+		}
+	}
+	
+	DB(mvOsPrintf("Dram: minCasCalc support = %x (after SysCC calc)\n",
+											pBankInfo->suportedCasLatencies ));
+
+	count = 1;
+	DB(mvOsPrintf("Dram2: minCasCalc supported mask = %x busClkPs = %x \n",
+								pBankInfo2->suportedCasLatencies,busClkPs ));
+	for(j = 7; j > 0; j--)
+	{
+		if((pBankInfo2->suportedCasLatencies >> j) & BIT0 )
+		{
+			/* Reset the bits for CL incompatible for the sysClk */
+			switch (count)
+			{
+				case 1: 
+					if (pBankInfo2->minCycleTimeAtMaxCasLatPs > busClkPs) 
+						pBankInfo2->suportedCasLatencies &= ~(BIT0 << j);
+					count++;
+					break;
+				case 2: 
+					if (pBankInfo2->minCycleTimeAtMaxCasLatMinus1Ps > busClkPs)
+						pBankInfo2->suportedCasLatencies &= ~(BIT0 << j);
+					count++;
+					break;
+				case 3: 
+					if (pBankInfo2->minCycleTimeAtMaxCasLatMinus2Ps > busClkPs)
+						pBankInfo2->suportedCasLatencies &= ~(BIT0 << j);
+					count++;
+					break;
+				default: 
+					pBankInfo2->suportedCasLatencies &= ~(BIT0 << j);
+					break;
+			}
+		}
+	}
+	
+	DB(mvOsPrintf("Dram2: minCasCalc support = %x (after SysCC calc)\n",
+									pBankInfo2->suportedCasLatencies ));
+
+	startBit = 3;   /* DDR2 support CL start with CL3 (bit 3) */
+	stopBit  = 6;   /* DDR2 support CL stops with CL6 (bit 6) */
+
+	for(j = startBit; j <= stopBit ; j++)
+	{
+		if((pBankInfo->suportedCasLatencies >> j) & BIT0 )
+		{
+			DB(mvOsPrintf("Dram: minCasCalc choose CAS %x \n",(BIT0 << j)));
+			minCas0 = (BIT0 << j);
+			break;
+		}
+	}
+
+	for(j = startBit; j <= stopBit ; j++)
+	{
+		if((pBankInfo2->suportedCasLatencies >> j) & BIT0 )
+		{
+			DB(mvOsPrintf("Dram: minCasCalc choose CAS %x \n",(BIT0 << j)));
+			minCas2 = (BIT0 << j);
+			break;
+		}
+	}
+	
+	if (minCas2 > minCas0)
+		return minCas2;
+	else
+		return minCas0;
+	
+	return 0; 
+}
+
+/*******************************************************************************
+* sdramConfigRegCalc - Calculate sdram config register
+*
+* DESCRIPTION: Calculate sdram config register optimized value based
+*			on the bank info parameters.
+*
+* INPUT:
+*	busClk    - the DRAM bus Clock.
+*	pBankInfo - sdram bank parameters
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       sdram config reg value.
+*
+*******************************************************************************/
+static MV_U32 sdramConfigRegCalc(MV_DRAM_BANK_INFO *pBankInfo,MV_DRAM_BANK_INFO *pBankInfo2, MV_U32 busClk)
+{
+	MV_U32 sdramConfig = 0;
+	MV_U32 refreshPeriod;
+	
+	busClk /= 1000000; /* we work with busClk in MHz */
+	
+	sdramConfig = MV_REG_READ(SDRAM_CONFIG_REG);
+	
+	/* figure out the memory refresh internal */
+	switch (pBankInfo->refreshInterval & 0xf)
+	{
+		case 0x0: /* refresh period is 15.625 usec */
+				refreshPeriod = 15625;
+				break;
+		case 0x1: /* refresh period is 3.9 usec  	*/
+				refreshPeriod = 3900;
+				break;
+		case 0x2: /* refresh period is 7.8 usec 	*/
+				refreshPeriod = 7800;
+				break;
+		case 0x3: /* refresh period is 31.3 usec	*/
+				refreshPeriod = 31300;
+				break;
+		case 0x4: /* refresh period is 62.5 usec	*/
+				refreshPeriod = 62500;
+				break;
+		case 0x5: /* refresh period is 125 usec 	*/
+				refreshPeriod = 125000;
+				break;
+		default:  /* refresh period undefined 					*/
+				mvOsPrintf("Dram: ERR. DRAM refresh period is unknown!\n");
+				return -1;
+    }
+	
+	/* Now the refreshPeriod is in register format value */
+	refreshPeriod = (busClk * refreshPeriod) / 1000;
+	
+	DB(mvOsPrintf("Dram: sdramConfigRegCalc calculated refresh interval %0x\n", 
+				  refreshPeriod));
+
+	/* make sure the refresh value is only 14 bits */
+	if(refreshPeriod > SDRAM_REFRESH_MAX)
+	{
+		refreshPeriod = SDRAM_REFRESH_MAX;
+		DB(mvOsPrintf("Dram: sdramConfigRegCalc adjusted refresh interval %0x\n", 
+					  refreshPeriod));
+	}
+	
+	/* Clear the refresh field */
+	sdramConfig &= ~SDRAM_REFRESH_MASK;
+	
+	/* Set new value to refresh field */
+	sdramConfig |= (refreshPeriod & SDRAM_REFRESH_MASK);
+	
+	/*  registered DRAM ? */
+	if ( pBankInfo->registeredAddrAndControlInputs )
+	{
+		/* it's registered DRAM, so set the reg. DRAM bit */
+		sdramConfig |= SDRAM_REGISTERED;
+		DB(mvOsPrintf("DRAM Attribute: Registered address and control inputs.\n");)
+	}
+
+	/* ECC and IERR support */
+	sdramConfig &= ~SDRAM_ECC_MASK;    /* Clear ECC field */
+	sdramConfig &= ~SDRAM_IERR_MASK;    /* Clear IErr field */
+
+	if ( pBankInfo->errorCheckType ) 
+	{
+		sdramConfig |= SDRAM_ECC_EN;
+		sdramConfig |= SDRAM_IERR_REPORTE; 
+                DB(mvOsPrintf("Dram: mvDramIfDetect Enabling ECC\n"));
+	}
+	else
+	{
+                sdramConfig |= SDRAM_ECC_DIS;
+		sdramConfig |= SDRAM_IERR_IGNORE; 
+                DB(mvOsPrintf("Dram: mvDramIfDetect Disabling ECC!\n"));
+	}
+	/* Set static default settings */
+	sdramConfig |= SDRAM_CONFIG_DV;
+	
+	DB(mvOsPrintf("Dram: sdramConfigRegCalc set sdramConfig to 0x%x\n",
+				  sdramConfig));
+	
+ 	return sdramConfig;  
+}
+
+/*******************************************************************************
+* sdramModeRegCalc - Calculate sdram mode register
+*
+* DESCRIPTION: Calculate sdram mode register optimized value based
+*			on the bank info parameters and the minCas.
+*
+* INPUT:
+*	minCas	  - minimum CAS supported. 
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       sdram mode reg value.
+*
+*******************************************************************************/
+static MV_U32 sdramModeRegCalc(MV_U32 minCas)
+{
+	MV_U32 sdramMode;
+		
+	sdramMode = MV_REG_READ(SDRAM_MODE_REG);
+	
+	/* Clear CAS Latency field */
+	sdramMode &= ~SDRAM_CL_MASK;
+	
+	DB(mvOsPrintf("DRAM CAS Latency ");)
+	
+		switch (minCas)
+		{
+			case DDR2_CL_3: 
+				sdramMode |= SDRAM_DDR2_CL_3;
+				DB(mvOsPrintf("3.\n");)
+				break;
+			case DDR2_CL_4: 
+				sdramMode |= SDRAM_DDR2_CL_4;
+				DB(mvOsPrintf("4.\n");)
+				break;
+			case DDR2_CL_5: 
+				sdramMode |= SDRAM_DDR2_CL_5;
+				DB(mvOsPrintf("5.\n");)
+				break;
+			case DDR2_CL_6: 
+				sdramMode |= SDRAM_DDR2_CL_6;
+				DB(mvOsPrintf("6.\n");)
+				break;
+			default:
+				mvOsOutput("\nsdramModeRegCalc ERROR: Max. CL out of range\n");
+				return -1;
+        }
+
+	DB(mvOsPrintf("\nsdramModeRegCalc register 0x%x\n", sdramMode ));
+
+	return sdramMode;
+}
+/*******************************************************************************
+* sdramExtModeRegCalc - Calculate sdram Extended mode register
+*
+* DESCRIPTION: 
+*		Return sdram Extended mode register value based
+*		on the bank info parameters and bank presence.
+*
+* INPUT:
+*	pBankInfo - sdram bank parameters
+*	busClk - DRAM frequency
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       sdram Extended mode reg value.
+*
+*******************************************************************************/
+static MV_U32 sdramExtModeRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk)
+{
+	MV_U32 populateBanks = 0;
+	int bankNum;
+
+		/* Represent the populate banks in binary form */
+		for(bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++)
+		{
+			if (0 != pBankInfo[bankNum].size)
+			{
+				populateBanks |= (1 << bankNum);
+			}
+		}
+	
+		switch(populateBanks)
+		{
+			case(BANK_PRESENT_CS0):
+			case(BANK_PRESENT_CS0_CS1):
+				return DDR_SDRAM_EXT_MODE_CS0_CS1_DV;
+		
+			case(BANK_PRESENT_CS0_CS2):
+			case(BANK_PRESENT_CS0_CS1_CS2):
+			case(BANK_PRESENT_CS0_CS2_CS3):
+			case(BANK_PRESENT_CS0_CS2_CS3_CS4):
+				if (busClk >= MV_BOARD_SYSCLK_267MHZ)
+				    return DDR_SDRAM_EXT_MODE_FAST_CS0_CS1_CS2_CS3_DV;
+				else
+				    return DDR_SDRAM_EXT_MODE_CS0_CS1_CS2_CS3_DV;
+		
+			default:
+				mvOsOutput("sdramExtModeRegCalc: Invalid DRAM bank presence\n");
+				return -1;
+		} 
+	return 0;
+}
+
+/*******************************************************************************
+* dunitCtrlLowRegCalc - Calculate sdram dunit control low register
+*
+* DESCRIPTION: Calculate sdram dunit control low register optimized value based
+*			on the bank info parameters and the minCas.
+*
+* INPUT:
+*	pBankInfo - sdram bank parameters
+*	minCas	  - minimum CAS supported. 
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       sdram dunit control low reg value.
+*
+*******************************************************************************/
+static MV_U32 dunitCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 minCas, MV_U32  busClk, MV_STATUS TTMode)
+{
+	MV_U32 dunitCtrlLow, cl;
+	MV_U32 sbOutR[4]={3,5,7,9} ;
+	MV_U32 sbOutU[4]={1,3,5,7} ;
+	
+    	dunitCtrlLow = MV_REG_READ(SDRAM_DUNIT_CTRL_REG);
+
+        DB(mvOsPrintf("Dram: dunitCtrlLowRegCalc\n"));
+
+	/* Clear StBurstOutDel field */
+	dunitCtrlLow &= ~SDRAM_SB_OUT_MASK;
+	
+	/* Clear StBurstInDel field */
+	dunitCtrlLow &= ~SDRAM_SB_IN_MASK;
+
+	/* Clear CtrlPos field */
+	dunitCtrlLow &= ~SDRAM_CTRL_POS_MASK;
+
+	/* Clear 2T field */
+	dunitCtrlLow &= ~SDRAM_2T_MASK;
+	if (TTMode == MV_TRUE)
+	{
+		dunitCtrlLow |= SDRAM_2T_MODE;
+	}
+	
+	/* For proper sample of read data set the Dunit Control register's      */
+	/* stBurstInDel bits [27:24]                                            */
+	/*		200MHz - 267MHz None reg  = CL + 1			*/
+	/*		200MHz - 267MHz reg	  = CL + 2			*/
+	/*		> 267MHz None reg  = CL + 2			*/
+	/*		> 267MHz reg	  = CL + 3			*/
+	
+	/* For proper sample of read data set the Dunit Control register's      */
+	/* stBurstOutDel bits [23:20]                                           */
+			/********-********-********-********-
+			*  CL=3  |  CL=4  |  CL=5  |  CL=6  |
+			*********-********-********-********-
+	Not Reg.	*  0001  |  0011  |  0101  |  0111  |
+			*********-********-********-********-
+	Registered	*  0011  |  0101  |  0111  |  1001  |
+			*********-********-********-********/
+    
+		/* Set Dunit Control low default value */
+		dunitCtrlLow |= SDRAM_DUNIT_CTRL_LOW_DDR2_DV; 
+
+		switch (minCas)
+		{
+			case DDR2_CL_3: cl = 3; break;
+			case DDR2_CL_4: cl = 4; break;
+			case DDR2_CL_5: cl = 5; break;
+			case DDR2_CL_6: cl = 6; break;
+			default:
+				mvOsOutput("Dram: dunitCtrlLowRegCalc Max. CL out of range %d\n", minCas);
+				return -1;
+		}
+
+		/* registerd DDR SDRAM? */
+		if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE)
+		{
+			dunitCtrlLow |= (sbOutR[cl-3]) << SDRAM_SB_OUT_DEL_OFFS;
+		}
+		else
+		{
+			dunitCtrlLow |= (sbOutU[cl-3]) << SDRAM_SB_OUT_DEL_OFFS;
+		}
+
+		DB(mvOsPrintf("\n\ndunitCtrlLowRegCalc: CL = %d, frequencies=%d\n", cl, busClk));
+
+		if (busClk <= MV_BOARD_SYSCLK_267MHZ)
+		{
+			if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE)
+				cl = cl + 2;
+			else
+				cl = cl + 1;
+		}
+		else
+		{
+			if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE)
+				cl = cl + 3;
+			else
+				cl = cl + 2;
+		}
+		
+        DB(mvOsPrintf("dunitCtrlLowRegCalc: SDRAM_SB_IN_DEL_OFFS = %d \n", cl));
+		dunitCtrlLow |= cl << SDRAM_SB_IN_DEL_OFFS;
+
+	DB(mvOsPrintf("Dram: Reg dunit control low = %x\n", dunitCtrlLow ));
+
+	return dunitCtrlLow;
+}  
+
+/*******************************************************************************
+* dunitCtrlHighRegCalc - Calculate sdram dunit control high register
+*
+* DESCRIPTION: Calculate sdram dunit control high register optimized value based
+*			on the bus clock.
+*
+* INPUT:
+*	busClk	  - DRAM frequency. 
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       sdram dunit control high reg value.
+*
+*******************************************************************************/
+static MV_U32 dunitCtrlHighRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32  busClk)
+{
+	MV_U32 dunitCtrlHigh;
+	dunitCtrlHigh = MV_REG_READ(SDRAM_DUNIT_CTRL_HI_REG);
+	if(busClk > MV_BOARD_SYSCLK_300MHZ) 
+		dunitCtrlHigh |= SDRAM__P2D_EN;
+	else
+		dunitCtrlHigh &= ~SDRAM__P2D_EN;
+
+	if(busClk > MV_BOARD_SYSCLK_267MHZ) 
+	    dunitCtrlHigh |= (SDRAM__WR_MESH_DELAY_EN | SDRAM__PUP_ZERO_SKEW_EN | SDRAM__ADD_HALF_FCC_EN);
+
+	/* If ECC support we turn on D2P sample */
+	dunitCtrlHigh &= ~SDRAM__D2P_EN;    /* Clear D2P bit */
+	if (( pBankInfo->errorCheckType ) && (busClk > MV_BOARD_SYSCLK_267MHZ))
+		dunitCtrlHigh |= SDRAM__D2P_EN;
+
+	return dunitCtrlHigh;
+}
+
+/*******************************************************************************
+* sdramAddrCtrlRegCalc - Calculate sdram address control register
+*
+* DESCRIPTION: Calculate sdram address control register optimized value based
+*			on the bank info parameters and the minCas.
+*
+* INPUT:
+*	pBankInfo - sdram bank parameters
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       sdram address control reg value.
+*
+*******************************************************************************/
+static MV_U32 sdramAddrCtrlRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_DRAM_BANK_INFO *pBankInfoDIMM1)
+{
+	MV_U32 addrCtrl = 0;
+	
+	if (pBankInfoDIMM1->size)
+	{
+		switch (pBankInfoDIMM1->sdramWidth)
+		{
+			case 4:  /* memory is x4 */
+				mvOsOutput("sdramAddrCtrlRegCalc: Error - x4 not supported!\n");
+				return -1;
+				break;
+			case 8:  /* memory is x8 */
+				addrCtrl |= SDRAM_ADDRSEL_X8(2) | SDRAM_ADDRSEL_X8(3);
+				DB(mvOsPrintf("sdramAddrCtrlRegCalc: sdramAddrCtrlRegCalc SDRAM device DIMM2 width x8\n"));
+				break;
+			case 16:
+				addrCtrl |= SDRAM_ADDRSEL_X16(2) | SDRAM_ADDRSEL_X16(3);
+				DB(mvOsPrintf("sdramAddrCtrlRegCalc: sdramAddrCtrlRegCalc SDRAM device DIMM2 width x16\n"));
+				break;
+			default: /* memory width unsupported */
+				mvOsOutput("sdramAddrCtrlRegCalc: ERR. DRAM chip width is unknown!\n");
+				return -1;
+		}
+	}
+
+	switch (pBankInfo->sdramWidth)
+	{
+		case 4:  /* memory is x4 */
+			mvOsOutput("sdramAddrCtrlRegCalc: Error - x4 not supported!\n");
+			return -1;
+			break;
+		case 8:  /* memory is x8 */
+			addrCtrl |= SDRAM_ADDRSEL_X8(0) | SDRAM_ADDRSEL_X8(1);
+			DB(mvOsPrintf("sdramAddrCtrlRegCalc: sdramAddrCtrlRegCalc SDRAM device width x8\n"));
+			break;
+		case 16:
+			addrCtrl |= SDRAM_ADDRSEL_X16(0) | SDRAM_ADDRSEL_X16(1);
+			DB(mvOsPrintf("sdramAddrCtrlRegCalc: sdramAddrCtrlRegCalc SDRAM device width x16\n"));
+			break;
+		default: /* memory width unsupported */
+			mvOsOutput("sdramAddrCtrlRegCalc: ERR. DRAM chip width is unknown!\n");
+			return -1;
+	}
+
+	/* Note that density is in MB units */
+	switch (pBankInfo->deviceDensity) 
+	{
+		case 256:                 /* 256 Mbit */
+			DB(mvOsPrintf("DRAM Device Density 256Mbit\n"));
+			addrCtrl |= SDRAM_DSIZE_256Mb(0) | SDRAM_DSIZE_256Mb(1);
+			break;
+		case 512:                /* 512 Mbit */
+			DB(mvOsPrintf("DRAM Device Density 512Mbit\n"));
+			addrCtrl |= SDRAM_DSIZE_512Mb(0) | SDRAM_DSIZE_512Mb(1);
+			break;
+		case 1024:                /* 1 Gbit */
+			DB(mvOsPrintf("DRAM Device Density 1Gbit\n"));
+			addrCtrl |= SDRAM_DSIZE_1Gb(0) | SDRAM_DSIZE_1Gb(1);
+			break;
+		case 2048:                /* 2 Gbit */
+			DB(mvOsPrintf("DRAM Device Density 2Gbit\n"));
+			addrCtrl |= SDRAM_DSIZE_2Gb(0) | SDRAM_DSIZE_2Gb(1);
+			break;
+		default:
+			mvOsOutput("Dram: sdramAddrCtrl unsupported RAM-Device size %d\n",
+                       pBankInfo->deviceDensity);
+			return -1;
+        }
+
+	if (pBankInfoDIMM1->size)
+	{
+		switch (pBankInfoDIMM1->deviceDensity) 
+		{
+			case 256:                 /* 256 Mbit */
+				DB(mvOsPrintf("DIMM2: DRAM Device Density 256Mbit\n"));
+				addrCtrl |= SDRAM_DSIZE_256Mb(2) | SDRAM_DSIZE_256Mb(3);
+				break;
+			case 512:                /* 512 Mbit */
+				DB(mvOsPrintf("DIMM2: DRAM Device Density 512Mbit\n"));
+				addrCtrl |= SDRAM_DSIZE_512Mb(2) | SDRAM_DSIZE_512Mb(3);
+				break;
+			case 1024:                /* 1 Gbit */
+				DB(mvOsPrintf("DIMM2: DRAM Device Density 1Gbit\n"));
+				addrCtrl |= SDRAM_DSIZE_1Gb(2) | SDRAM_DSIZE_1Gb(3);
+				break;
+			case 2048:                /* 2 Gbit */
+				DB(mvOsPrintf("DIMM2: DRAM Device Density 2Gbit\n"));
+				addrCtrl |= SDRAM_DSIZE_2Gb(2) | SDRAM_DSIZE_2Gb(3);
+				break;
+			default:
+				mvOsOutput("DIMM2: Dram: sdramAddrCtrl unsupported RAM-Device size %d\n",
+						   pBankInfoDIMM1->deviceDensity);
+				return -1;
+		}
+	}
+	/* SDRAM address control */
+	DB(mvOsPrintf("Dram: setting sdram address control with: %x \n", addrCtrl));
+
+	return addrCtrl;
+}
+
+/*******************************************************************************
+* sdramTimeCtrlLowRegCalc - Calculate sdram timing control low register
+*
+* DESCRIPTION: 
+*       This function calculates sdram timing control low register 
+*       optimized value based on the bank info parameters and the minCas.
+*
+* INPUT:
+*	    pBankInfo - sdram bank parameters
+*	minCas	  - minimum CAS supported. 
+*       busClk    - Bus clock
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       sdram timing control low reg value.
+*
+*******************************************************************************/
+static MV_U32 sdramTimeCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 minCas, MV_U32 busClk)
+{
+    MV_U32 tRp  = 0;
+    MV_U32 tRrd = 0;
+    MV_U32 tRcd = 0;
+    MV_U32 tRas = 0;
+    MV_U32 tWr  = 0;
+    MV_U32 tWtr = 0;
+    MV_U32 tRtp = 0;
+    MV_U32 timeCtrlLow = 0;
+	
+    MV_U32 bankNum;
+    
+    busClk = busClk / 1000000;    /* In MHz */
+
+    /* Scan all DRAM banks to find maximum timing values */
+    for (bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++)
+    {
+        tRp  = MV_MAX(tRp,  pBankInfo[bankNum].minRowPrechargeTime);
+        tRrd = MV_MAX(tRrd, pBankInfo[bankNum].minRowActiveToRowActive);
+        tRcd = MV_MAX(tRcd, pBankInfo[bankNum].minRasToCasDelay);
+        tRas = MV_MAX(tRas, pBankInfo[bankNum].minRasPulseWidth);
+    }
+
+    /* Extract timing (in ns) from SPD value. We ignore the tenth ns part.  */
+    /* by shifting the data two bits right.                                 */
+    tRp  = tRp  >> 2;    /* For example 0x50 -> 20ns                        */
+    tRrd = tRrd >> 2;
+    tRcd = tRcd >> 2;
+	
+    /* Extract clock cycles from time parameter. We need to round up        */
+    tRp  = ((busClk * tRp)  / 1000) + (((busClk * tRp)  % 1000) ? 1 : 0);
+    DB(mvOsPrintf("Dram  Timing Low: tRp = %d ", tRp));
+    tRrd = ((busClk * tRrd) / 1000) + (((busClk * tRrd) % 1000) ? 1 : 0);
+	/* JEDEC min reqeirments tRrd = 2 */
+	if (tRrd < 2)
+		tRrd = 2;
+    DB(mvOsPrintf("tRrd = %d ", tRrd));
+    tRcd = ((busClk * tRcd) / 1000) + (((busClk * tRcd) % 1000) ? 1 : 0);
+    DB(mvOsPrintf("tRcd = %d ", tRcd));
+    tRas = ((busClk * tRas) / 1000) + (((busClk * tRas) % 1000) ? 1 : 0);
+    DB(mvOsPrintf("tRas = %d ", tRas));
+
+    /* tWr and tWtr is different for DDR1 and DDR2. tRtp is only for DDR2   */
+	/* Scan all DRAM banks to find maximum timing values */
+	for (bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++)
+	{
+	    tWr  = MV_MAX(tWr,  pBankInfo[bankNum].minWriteRecoveryTime);
+	    tWtr = MV_MAX(tWtr, pBankInfo[bankNum].minWriteToReadCmdDelay);
+	    tRtp = MV_MAX(tRtp, pBankInfo[bankNum].minReadToPrechCmdDelay);
+	}
+	
+	/* Extract timing (in ns) from SPD value. We ignore the tenth ns    */
+	/* part by shifting the data two bits right.                        */
+	tWr  = tWr  >> 2;    /* For example 0x50 -> 20ns                    */
+	tWtr = tWtr >> 2;
+	tRtp = tRtp >> 2;
+	/* Extract clock cycles from time parameter. We need to round up    */
+	tWr  = ((busClk * tWr)  / 1000) + (((busClk * tWr)  % 1000) ? 1 : 0);
+	DB(mvOsPrintf("tWr = %d ", tWr));
+	tWtr = ((busClk * tWtr) / 1000) + (((busClk * tWtr) % 1000) ? 1 : 0);
+	/* JEDEC min reqeirments tWtr = 2 */
+	if (tWtr < 2)
+		tWtr = 2;
+	DB(mvOsPrintf("tWtr = %d ", tWtr));
+	tRtp = ((busClk * tRtp) / 1000) + (((busClk * tRtp) % 1000) ? 1 : 0);
+	/* JEDEC min reqeirments tRtp = 2 */
+	if (tRtp < 2)
+	tRtp = 2;
+	DB(mvOsPrintf("tRtp = %d ", tRtp));
+
+	/* Note: value of 0 in register means one cycle, 1 means two and so on  */
+	timeCtrlLow = (((tRp  - 1) << SDRAM_TRP_OFFS) |
+		    ((tRrd - 1) << SDRAM_TRRD_OFFS) |
+		    ((tRcd - 1) << SDRAM_TRCD_OFFS) |
+		    (((tRas - 1) << SDRAM_TRAS_OFFS) & SDRAM_TRAS_MASK)|
+		    ((tWr  - 1) << SDRAM_TWR_OFFS)  |
+		    ((tWtr - 1) << SDRAM_TWTR_OFFS)	|
+		    ((tRtp - 1) << SDRAM_TRTP_OFFS));
+	
+	/* Check extended tRas bit */
+	if ((tRas - 1) & BIT4)
+	    timeCtrlLow |= (1 << SDRAM_EXT_TRAS_OFFS);
+
+	return timeCtrlLow;
+}
+
+/*******************************************************************************
+* sdramTimeCtrlHighRegCalc - Calculate sdram timing control high register
+*
+* DESCRIPTION: 
+*       This function calculates sdram timing control high register 
+*       optimized value based on the bank info parameters and the bus clock.
+*
+* INPUT:
+*	    pBankInfo - sdram bank parameters
+*       busClk    - Bus clock
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       sdram timing control high reg value.
+*
+*******************************************************************************/
+static MV_U32 sdramTimeCtrlHighRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk)
+{
+	MV_U32 tRfc;
+	MV_U32 timingHigh;
+	MV_U32 timeNs = 0;
+	MV_U32 bankNum;
+	
+	busClk = busClk / 1000000;    /* In MHz */
+
+	/* Set DDR timing high register static configuration bits */
+	timingHigh = MV_REG_READ(SDRAM_TIMING_CTRL_HIGH_REG);
+	
+	/* Set DDR timing high register default value */
+	timingHigh |= SDRAM_TIMING_CTRL_HIGH_REG_DV;  
+	
+	/* Clear tRfc field */
+	timingHigh &= ~SDRAM_TRFC_MASK;
+
+	/* Scan all DRAM banks to find maximum timing values */
+	for (bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++)
+	{
+		timeNs = MV_MAX(timeNs,  pBankInfo[bankNum].minRefreshToActiveCmd);
+		DB(mvOsPrintf("Dram:  Timing High: minRefreshToActiveCmd = %d\n", 
+				pBankInfo[bankNum].minRefreshToActiveCmd));
+	}
+	if(busClk >= 333 && mvCtrlModelGet() == MV_78XX0_A1_REV)
+    {
+        timingHigh |= 0x1 << SDRAM_TR2W_W2R_OFFS;
+    }
+
+	tRfc = ((busClk * timeNs)  / 1000) + (((busClk * timeNs)  % 1000) ? 1 : 0);
+	/* Note: value of 0 in register means one cycle, 1 means two and so on  */
+	DB(mvOsPrintf("Dram:  Timing High: tRfc = %d\n", tRfc));
+	timingHigh |= (((tRfc - 1) & SDRAM_TRFC_MASK) << SDRAM_TRFC_OFFS);
+	DB(mvOsPrintf("Dram:  Timing High: tRfc = %d\n", tRfc));
+	
+	/* SDRAM timing high */
+	DB(mvOsPrintf("Dram: setting timing high with: %x \n", timingHigh));
+
+	return timingHigh;
+}
+/*******************************************************************************
+* sdramDDr2OdtConfig - Set DRAM DDR2 On Die Termination registers.
+*
+* DESCRIPTION: 
+*       This function config DDR2 On Die Termination (ODT) registers.
+*	
+* INPUT:
+*		pBankInfo - bank info parameters.
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       None
+*******************************************************************************/
+static void sdramDDr2OdtConfig(MV_DRAM_BANK_INFO *pBankInfo)
+{
+	MV_U32 populateBanks = 0;
+	MV_U32 odtCtrlLow, odtCtrlHigh, dunitOdtCtrl;
+	int bankNum;
+	
+	/* Represent the populate banks in binary form */
+	for(bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++)
+	{
+		if (0 != pBankInfo[bankNum].size)
+		{
+				populateBanks |= (1 << bankNum);
+			}
+		}
+	
+	switch(populateBanks)
+	{
+		case(BANK_PRESENT_CS0):
+		case(BANK_PRESENT_CS0_CS1):
+			odtCtrlLow   = DDR2_ODT_CTRL_LOW_CS0_CS1_DV;
+			odtCtrlHigh  = DDR2_ODT_CTRL_HIGH_CS0_CS1_DV;
+			dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_CS1_DV;
+			break;
+		case(BANK_PRESENT_CS0_CS2):
+		case(BANK_PRESENT_CS0_CS1_CS2):
+		case(BANK_PRESENT_CS0_CS2_CS3):
+		case(BANK_PRESENT_CS0_CS2_CS3_CS4):
+			odtCtrlLow   = DDR2_ODT_CTRL_LOW_CS0_CS1_CS2_CS3_DV;
+			odtCtrlHigh  = DDR2_ODT_CTRL_HIGH_CS0_CS1_CS2_CS3_DV;
+			dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_CS1_CS2_CS3_DV;
+			break;
+		default:
+			DB(mvOsPrintf("sdramDDr2OdtConfig: Invalid DRAM bank presence\n"));
+			return;
+	}
+ 	/* DDR2 SDRAM ODT ctrl low  */
+	DB(mvOsPrintf("Dram: DDR2 setting ODT ctrl low with: %x \n", odtCtrlLow));
+	MV_REG_WRITE(DRAM_BUF_REG7, odtCtrlLow);
+
+ 	/* DDR2 SDRAM ODT ctrl high  */
+	DB(mvOsPrintf("Dram: DDR2 setting ODT ctrl high with: %x \n", odtCtrlHigh));
+	MV_REG_WRITE(DRAM_BUF_REG8, odtCtrlHigh);
+
+	/* DDR2 DUNIT ODT ctrl  */
+	if ( ((mvCtrlModelGet() == MV_78XX0_DEV_ID) && (mvCtrlRevGet() == MV_78XX0_Y0_REV)) ||
+		(mvCtrlModelGet() == MV_76100_DEV_ID) ||
+		(mvCtrlModelGet() == MV_78100_DEV_ID) ||
+		(mvCtrlModelGet() == MV_78200_DEV_ID) )
+		dunitOdtCtrl &= ~(BIT9|BIT8); /* Clear ODT always on */
+
+	DB(mvOsPrintf("DUNIT: DDR2 setting ODT ctrl with: %x \n", dunitOdtCtrl));
+	MV_REG_WRITE(DRAM_BUF_REG9, dunitOdtCtrl);
+	return;
+}
+/*******************************************************************************
+* sdramDdr2TimeLoRegCalc - Set DDR2 DRAM Timing Low registers.
+*
+* DESCRIPTION: 
+*       This function config DDR2 DRAM Timing low registers.
+*	
+* INPUT:
+*	minCas	  - minimum CAS supported. 
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       DDR2 sdram timing low reg value.
+*******************************************************************************/
+static MV_U32 sdramDdr2TimeLoRegCalc(MV_U32 minCas)
+{
+	MV_U8 cl = -1;
+	MV_U32 ddr2TimeLoReg;
+
+	/* read and clear the feilds we are going to set */
+	ddr2TimeLoReg = MV_REG_READ(SDRAM_DDR2_TIMING_LO_REG);
+	ddr2TimeLoReg &= ~(SD2TLR_TODT_ON_RD_MASK	| 
+			   SD2TLR_TODT_OFF_RD_MASK	| 
+			   SD2TLR_TODT_ON_CTRL_RD_MASK	|
+			   SD2TLR_TODT_OFF_CTRL_RD_MASK);
+
+	if( minCas == DDR2_CL_3 )
+	{
+		cl = 3;
+	}
+	else if( minCas == DDR2_CL_4 )
+	{
+		cl = 4;
+	}
+	else if( minCas == DDR2_CL_5 )
+	{
+		cl = 5;
+	}
+	else if( minCas == DDR2_CL_6 )
+	{
+		cl = 6;
+	}
+	else
+	{
+		DB(mvOsPrintf("sdramDdr2TimeLoRegCalc: CAS latency %d unsupported. using CAS latency 4\n",
+				minCas));
+		cl = 4;
+	}
+
+	ddr2TimeLoReg |= ((cl-3) << SD2TLR_TODT_ON_RD_OFFS);
+	ddr2TimeLoReg |= ( cl << SD2TLR_TODT_OFF_RD_OFFS);
+	ddr2TimeLoReg |= ( cl << SD2TLR_TODT_ON_CTRL_RD_OFFS);
+	ddr2TimeLoReg |= ((cl+3) << SD2TLR_TODT_OFF_CTRL_RD_OFFS);
+
+	/* DDR2 SDRAM timing low */
+	DB(mvOsPrintf("Dram: DDR2 setting timing low with: %x \n", ddr2TimeLoReg));
+
+	return ddr2TimeLoReg;
+}
+
+/*******************************************************************************
+* sdramDdr2TimeHiRegCalc - Set DDR2 DRAM Timing High registers.
+*
+* DESCRIPTION: 
+*       This function config DDR2 DRAM Timing high registers.
+*	
+* INPUT:
+*	minCas	  - minimum CAS supported. 
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       DDR2 sdram timing high reg value.
+*******************************************************************************/
+static MV_U32 sdramDdr2TimeHiRegCalc(MV_U32 minCas)
+{
+	MV_U8 cl = -1;
+	MV_U32 ddr2TimeHiReg;
+
+	/* read and clear the feilds we are going to set */
+	ddr2TimeHiReg = MV_REG_READ(SDRAM_DDR2_TIMING_HI_REG);
+	ddr2TimeHiReg &= ~(SD2THR_TODT_ON_WR_MASK	|
+			   SD2THR_TODT_OFF_WR_MASK	|
+			   SD2THR_TODT_ON_CTRL_WR_MASK	|
+			   SD2THR_TODT_OFF_CTRL_WR_MASK);
+
+	if( minCas == DDR2_CL_3 )
+	{
+		cl = 3;
+	}
+	else if( minCas == DDR2_CL_4 )
+	{
+		cl = 4;
+	}
+	else if( minCas == DDR2_CL_5 )
+	{
+		cl = 5;
+	}
+	else if( minCas == DDR2_CL_6 )
+	{
+		cl = 6;
+	}
+	else
+	{
+		mvOsOutput("sdramDdr2TimeHiRegCalc: CAS latency %d unsupported. using CAS latency 4\n", 
+				minCas);
+		cl = 4;
+	}
+
+	ddr2TimeHiReg |= ((cl-3) << SD2THR_TODT_ON_WR_OFFS);
+	ddr2TimeHiReg |= ( cl << SD2THR_TODT_OFF_WR_OFFS);
+	ddr2TimeHiReg |= ( cl << SD2THR_TODT_ON_CTRL_WR_OFFS);
+	ddr2TimeHiReg |= ((cl+3) << SD2THR_TODT_OFF_CTRL_WR_OFFS);
+
+	/* DDR2 SDRAM timin high  */
+	DB(mvOsPrintf("Dram: DDR2 setting timing high with: %x \n", ddr2TimeHiReg));
+
+	return ddr2TimeHiReg;
+}
+#endif
+
+/*******************************************************************************
+* mvDramIfCalGet - Get CAS Latency
+*
+* DESCRIPTION: 
+*       This function get the CAS Latency.
+*
+* INPUT:
+*       None
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       CAS latency times 10 (to avoid using floating point).
+*
+*******************************************************************************/
+MV_U32 mvDramIfCalGet(void)
+{
+	MV_U32 sdramCasLat, casLatMask;
+	
+    casLatMask = (MV_REG_READ(SDRAM_MODE_REG) & SDRAM_CL_MASK);
+
+    switch (casLatMask)
+    {
+        case SDRAM_DDR2_CL_3: 
+            sdramCasLat = 30;
+            break;
+        case SDRAM_DDR2_CL_4: 
+            sdramCasLat = 40;
+            break;
+        case SDRAM_DDR2_CL_5: 
+            sdramCasLat = 50;
+            break;
+        case SDRAM_DDR2_CL_6: 
+            sdramCasLat = 60;
+            break;
+        default:
+            mvOsOutput("mvDramIfCalGet: Err, unknown DDR2 CAL\n");
+            return -1;
+    }                                  
+    
+    return sdramCasLat;
+}
+
+
+/*******************************************************************************
+* mvDramIfSelfRefreshSet - Put the dram in self refresh mode - 
+*
+* DESCRIPTION: 
+*               add support in power management.
+*                          
+*
+* INPUT:
+*       None
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       None
+*
+*******************************************************************************/
+
+MV_VOID mvDramIfSelfRefreshSet()
+{
+    MV_U32 operReg;
+
+      operReg =  MV_REG_READ(SDRAM_OPERATION_REG);
+      MV_REG_WRITE(SDRAM_OPERATION_REG ,operReg |SDRAM_CMD_SLF_RFRSH);
+      /* Read until register is reset to 0 */
+      while(MV_REG_READ(SDRAM_OPERATION_REG));
+}
+/*******************************************************************************
+* mvDramIfDimGetSPDversion - return DIMM SPD version.
+*
+* DESCRIPTION:
+*		This function prints the DRAM controller information.
+*
+* INPUT:
+*		None.
+*
+* OUTPUT:
+*		None.
+*
+* RETURN:
+*		None.
+*
+*******************************************************************************/
+static void mvDramIfDimGetSPDversion(MV_U32 *pMajor, MV_U32 *pMinor, MV_U32 bankNum)
+{
+	MV_DIMM_INFO dimmInfo;
+	if (bankNum >= MV_DRAM_MAX_CS )
+	{
+		DB(mvOsPrintf("Dram: mvDramIfDimGetSPDversion bad params \n")); 
+		return ;
+	}
+	memset(&dimmInfo,0,sizeof(dimmInfo));
+	if ( MV_OK != dimmSpdGet((MV_U32)(bankNum/2), &dimmInfo))
+	{
+		DB(mvOsPrintf("Dram: ERR dimmSpdGet failed to get dimm info \n"));
+		return ;
+	}
+	*pMajor = dimmInfo.spdRawData[DIMM_SPD_VERSION]/10;
+	*pMinor = dimmInfo.spdRawData[DIMM_SPD_VERSION]%10;
+}
+/*******************************************************************************
+* mvDramIfShow - Show DRAM controller information.
+*
+* DESCRIPTION:
+*		This function prints the DRAM controller information.
+*
+* INPUT:
+*		None.
+*
+* OUTPUT:
+*		None.
+*
+* RETURN:
+*		None.
+*
+*******************************************************************************/
+void mvDramIfShow(void)
+{
+    int i, sdramCasLat, sdramCsSize;
+	MV_U32 Major=0, Minor=0;
+    
+    mvOsOutput("DRAM Controller info:\n");
+    
+    mvOsOutput("Total DRAM ");
+    mvSizePrint(mvDramIfSizeGet());
+    mvOsOutput("\n");
+
+	for(i = 0; i < MV_DRAM_MAX_CS; i++)
+	{ 
+        sdramCsSize = mvDramIfBankSizeGet(i);
+        if (sdramCsSize)
+        {
+			if (0 == (i & 1))
+			{
+				mvDramIfDimGetSPDversion(&Major, &Minor,i);
+				mvOsOutput("DIMM %d version %d.%d\n", i/2, Major, Minor);
+			}
+            mvOsOutput("\tDRAM CS[%d] ", i);
+            mvSizePrint(sdramCsSize);
+            mvOsOutput("\n");
+        }
+    }
+    sdramCasLat = mvDramIfCalGet();
+
+    if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_ECC_EN)
+    {
+        mvOsOutput("ECC enabled, ");
+    }
+    else
+    {
+        mvOsOutput("ECC Disabled, ");
+    }
+    
+    if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_REGISTERED)
+    {
+        mvOsOutput("Registered DIMM\n");
+    }
+    else
+    {
+        mvOsOutput("Non registered DIMM\n");
+    }
+
+    mvOsOutput("Configured CAS Latency %d.%d\n", sdramCasLat/10, sdramCasLat%10);
+}
+/*******************************************************************************
+* mvDramIfGetFirstCS - find the  DRAM bank on the lower address
+* 
+*
+* DESCRIPTION:
+*       This function return the fisrt CS on address 0
+*
+* INPUT:
+*		None.
+*
+* OUTPUT:
+*		None.
+*
+* RETURN:
+*       SDRAM_CS0 or SDRAM_CS2
+*
+*******************************************************************************/
+MV_U32 mvDramIfGetFirstCS(void)
+{
+	MV_DRAM_BANK_INFO bankInfo[MV_DRAM_MAX_CS];
+
+	if (DRAM_CS_Order[0] == N_A)
+	{
+		mvDramBankInfoGet(SDRAM_CS0, &bankInfo[SDRAM_CS0]);
+#ifdef MV_INCLUDE_SDRAM_CS2
+		mvDramBankInfoGet(SDRAM_CS2, &bankInfo[SDRAM_CS2]);
+#endif 
+		
+#ifdef MV_INCLUDE_SDRAM_CS2
+		if (bankInfo[SDRAM_CS0].size <  bankInfo[SDRAM_CS2].size)
+		{
+			DRAM_CS_Order[0] = SDRAM_CS2;
+			DRAM_CS_Order[1] = SDRAM_CS3;
+			DRAM_CS_Order[2] = SDRAM_CS0;
+			DRAM_CS_Order[3] = SDRAM_CS1;
+
+			return SDRAM_CS2;
+		}
+#endif
+		DRAM_CS_Order[0] = SDRAM_CS0;
+		DRAM_CS_Order[1] = SDRAM_CS1;
+#ifdef MV_INCLUDE_SDRAM_CS2
+		DRAM_CS_Order[2] = SDRAM_CS2;
+		DRAM_CS_Order[3] = SDRAM_CS3;
+#endif	
+		return SDRAM_CS0;
+	}
+	return DRAM_CS_Order[0];
+}
+/*******************************************************************************
+* mvDramIfGetCSorder - 
+* 
+*
+* DESCRIPTION:
+*       This function return the fisrt CS on address 0
+*
+* INPUT:
+*		CS number.
+*
+* OUTPUT:
+*		CS order.
+*
+* RETURN:
+*       SDRAM_CS0 or SDRAM_CS2
+* 
+* NOTE: mvDramIfGetFirstCS must be caled before this subroutine
+*******************************************************************************/
+MV_U32 mvDramIfGetCSorder(MV_U32 csOrder )
+{
+	return DRAM_CS_Order[csOrder];
+}
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIf.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIf.h
new file mode 100644
index 0000000000..23f2e540c0
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIf.h
@@ -0,0 +1,172 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvDramIfh
+#define __INCmvDramIfh
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* includes */
+#include "ddr2/mvDramIfRegs.h"
+#include "ddr2/mvDramIfConfig.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+
+/* defines  */
+/* DRAM Timing parameters */
+#define SDRAM_TWR                    15  /* ns tWr */
+#define SDRAM_TRFC_64_512M_AT_200MHZ 70  /* ns tRfc for dens 64-512 @ 200MHz */
+#define SDRAM_TRFC_64_512M           75  /* ns tRfc for dens 64-512          */
+#define SDRAM_TRFC_1G                120 /* ns tRfc for dens 1GB             */
+#define SDRAM_TR2R_CYC               1   /* cycle for tR2r                   */
+
+#define CAL_AUTO_DETECT     0   /* Do not force CAS latancy (mvDramIfDetect) */
+#define ECC_DISABLE         1   /* Force ECC to Disable                      */
+#define ECC_ENABLE          0   /* Force ECC to ENABLE                       */
+/* typedefs */
+
+/* enumeration for memory types */
+typedef enum _mvMemoryType
+{
+    MEM_TYPE_SDRAM,
+    MEM_TYPE_DDR1,
+    MEM_TYPE_DDR2
+}MV_MEMORY_TYPE;
+
+/* enumeration for DDR2 supported CAS Latencies */
+typedef enum _mvDimmDdr2Cas
+{
+    DDR2_CL_3    = 0x08, 
+    DDR2_CL_4    = 0x10, 
+    DDR2_CL_5    = 0x20, 
+    DDR2_CL_6    = 0x40, 
+    DDR2_CL_FAULT
+} MV_DIMM_DDR2_CAS;
+
+
+typedef struct _mvDramBankInfo
+{
+    MV_MEMORY_TYPE  memoryType; 	/* DDR1, DDR2 or SDRAM */
+
+    /* DIMM dimensions */
+    MV_U32  numOfRowAddr;
+    MV_U32  numOfColAddr;
+    MV_U32  dataWidth;
+    MV_U32  errorCheckType;             /* ECC , PARITY..*/
+    MV_U32  sdramWidth;                 /* 4,8,16 or 32 */
+    MV_U32  errorCheckDataWidth;        /* 0 - no, 1 - Yes */
+    MV_U32  burstLengthSupported;
+    MV_U32  numOfBanksOnEachDevice;
+    MV_U32  suportedCasLatencies;
+    MV_U32  refreshInterval;
+
+    /* DIMM timing parameters */
+    MV_U32  minCycleTimeAtMaxCasLatPs;	
+    MV_U32  minCycleTimeAtMaxCasLatMinus1Ps;
+    MV_U32  minCycleTimeAtMaxCasLatMinus2Ps;
+    MV_U32  minRowPrechargeTime;
+    MV_U32  minRowActiveToRowActive;
+    MV_U32  minRasToCasDelay;
+    MV_U32  minRasPulseWidth;
+    MV_U32  minWriteRecoveryTime;   /* DDR2 only */
+    MV_U32  minWriteToReadCmdDelay; /* DDR2 only */
+    MV_U32  minReadToPrechCmdDelay; /* DDR2 only */
+    MV_U32  minRefreshToActiveCmd;  /* DDR2 only */
+                      
+    /* Parameters calculated from the extracted DIMM information */
+    MV_U32  size;
+    MV_U32  deviceDensity;           	/* 16,64,128,256 or 512 Mbit */
+    MV_U32  numberOfDevices;
+
+    /* DIMM attributes (MV_TRUE for yes) */
+    MV_BOOL registeredAddrAndControlInputs;
+    MV_BOOL registeredDQMBinputs;
+     
+}MV_DRAM_BANK_INFO;
+
+#include "ddr2/spd/mvSpd.h"
+
+/* mvDramIf.h API list */
+MV_VOID   mvDramIfBasicAsmInit(MV_VOID);
+MV_STATUS mvDramIfDetect(MV_U32 forcedCl, MV_BOOL eccDisable);
+MV_VOID   _mvDramIfConfig(int entryNum);
+
+MV_U32 mvDramIfBankSizeGet(MV_U32 bankNum);
+MV_U32 mvDramIfBankBaseGet(MV_U32 bankNum);
+MV_U32 mvDramIfSizeGet(MV_VOID);
+MV_U32 mvDramIfCalGet(void);
+MV_STATUS mvDramIfSingleBitErrThresholdSet(MV_U32 threshold);
+MV_VOID mvDramIfSelfRefreshSet(void);
+void mvDramIfShow(void);
+MV_U32 mvDramIfGetFirstCS(void);
+MV_U32 mvDramIfGetCSorder(MV_U32 csOrder );
+MV_U32 mvDramCsSizeGet(MV_U32 csNum);
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __INCmvDramIfh */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfConfig.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfConfig.h
new file mode 100644
index 0000000000..6141c46a08
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfConfig.h
@@ -0,0 +1,157 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvDramIfConfigh
+#define __INCmvDramIfConfigh
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* includes */
+
+/* defines  */
+
+/* registers defaults values */
+
+#define SDRAM_CONFIG_DV 	(SDRAM_SRMODE_DRAM | BIT25 | BIT30)
+
+#define SDRAM_DUNIT_CTRL_LOW_DDR2_DV			\
+		(SDRAM_SRCLK_KEPT		|	\
+		 SDRAM_CLK1DRV_NORMAL		|	\
+		 (BIT28 | BIT29))
+
+#define SDRAM_ADDR_CTRL_DV	    2
+		
+#define SDRAM_TIMING_CTRL_LOW_REG_DV 	\
+		((0x2 << SDRAM_TRCD_OFFS) | 	\
+		 (0x2 << SDRAM_TRP_OFFS)  | 	\
+		 (0x1 << SDRAM_TWR_OFFS)  | 	\
+		 (0x0 << SDRAM_TWTR_OFFS) | 	\
+		 (0x5 << SDRAM_TRAS_OFFS) | 	\
+		 (0x1 << SDRAM_TRRD_OFFS))
+
+/* Note: value of 0 in register means one cycle, 1 means two and so on  */
+#define SDRAM_TIMING_CTRL_HIGH_REG_DV 	\
+		((0x0 << SDRAM_TR2R_OFFS)	|	\
+		 (0x0 << SDRAM_TR2W_W2R_OFFS)	|	\
+		 (0x1 << SDRAM_TW2W_OFFS))
+
+#define SDRAM_OPEN_PAGES_CTRL_REG_DV 	SDRAM_OPEN_PAGE_EN	
+
+/* Presence	     Ctrl Low    Ctrl High  Dunit Ctrl   Ext Mode     */
+/* CS0              0x84210000  0x00000000  0x0000780F  0x00000440    */
+/* CS0+CS1          0x84210000  0x00000000  0x0000780F  0x00000440    */
+/* CS0+CS2          0x030C030C  0x00000000  0x0000740F  0x00000404    */
+/* CS0+CS1+CS2      0x030C030C  0x00000000  0x0000740F  0x00000404    */
+/* CS0+CS2+CS3      0x030C030C  0x00000000  0x0000740F  0x00000404    */
+/* CS0+CS1+CS2+CS3  0x030C030C  0x00000000  0x0000740F  0x00000404    */
+
+#define DDR2_ODT_CTRL_LOW_CS0_CS1_DV		0x84210000
+#define DDR2_ODT_CTRL_HIGH_CS0_CS1_DV		0x00000000
+#define DDR2_DUNIT_ODT_CTRL_CS0_CS1_DV		0x0000E80F
+#ifdef MV78XX0
+#define DDR_SDRAM_EXT_MODE_CS0_CS1_DV		0x00000040
+#else
+#define DDR_SDRAM_EXT_MODE_CS0_CS1_DV		0x00000440
+#endif
+
+#define DDR2_ODT_CTRL_LOW_CS0_CS1_CS2_CS3_DV	0x030C030C
+#define DDR2_ODT_CTRL_HIGH_CS0_CS1_CS2_CS3_DV	0x00000000
+#define DDR2_DUNIT_ODT_CTRL_CS0_CS1_CS2_CS3_DV	0x0000F40F
+#ifdef MV78XX0
+#define DDR_SDRAM_EXT_MODE_CS0_CS1_CS2_CS3_DV	0x00000004
+#define DDR_SDRAM_EXT_MODE_FAST_CS0_CS1_CS2_CS3_DV	0x00000044
+#else
+#define DDR_SDRAM_EXT_MODE_CS0_CS1_CS2_CS3_DV	0x00000404
+#define DDR_SDRAM_EXT_MODE_FAST_CS0_CS1_CS2_CS3_DV	0x00000444
+#endif
+
+/* DDR SDRAM Adderss/Control and Data Pads Calibration default values */
+#define DDR2_ADDR_CTRL_PAD_STRENGTH_TYPICAL_DV	\
+		(3 << SDRAM_PRE_DRIVER_STRENGTH_OFFS)
+		
+#define DDR2_DATA_PAD_STRENGTH_TYPICAL_DV		\
+		(3 << SDRAM_PRE_DRIVER_STRENGTH_OFFS)
+
+/* DDR SDRAM Mode Register default value */
+#define DDR2_MODE_REG_DV		(SDRAM_BURST_LEN_4 | SDRAM_WR_3_CYC)
+/* DDR SDRAM Timing parameter default values */
+#define SDRAM_TIMING_CTRL_LOW_REG_DEFAULT  	0x33136552
+#define SDRAM_TRFC_DEFAULT_VALUE		0x34
+#define SDRAM_TRFC_DEFAULT		SDRAM_TRFC_DEFAULT_VALUE
+#define SDRAM_TW2W_DEFALT		(0x1 << SDRAM_TW2W_OFFS)
+
+#define SDRAM_TIMING_CTRL_HIGH_REG_DEFAULT  (SDRAM_TRFC_DEFAULT | SDRAM_TW2W_DEFALT)
+
+#define SDRAM_FTDLL_REG_DEFAULT_LEFT  		0x88C800
+#define SDRAM_FTDLL_REG_DEFAULT_RIGHT  		0x88C800
+#define SDRAM_FTDLL_REG_DEFAULT_UP  		0x88C800
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __INCmvDramIfh */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfRegs.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfRegs.h
new file mode 100644
index 0000000000..369eda692b
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfRegs.h
@@ -0,0 +1,423 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvDramIfRegsh
+#define __INCmvDramIfRegsh
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* DDR SDRAM Controller Address Decode Registers */
+ /* SDRAM CSn Base Address Register (SCBAR) */
+#define SDRAM_BASE_ADDR_REG(cpu,csNum)	(0x1500 + ((csNum) * 8) + ((cpu) * 0x70))
+#define SCBAR_BASE_OFFS			16 
+#define SCBAR_BASE_MASK			(0xffff << SCBAR_BASE_OFFS)
+#define SCBAR_BASE_ALIGNMENT		0x10000 
+
+/* SDRAM CSn Size Register (SCSR) */		  
+#define SDRAM_SIZE_REG(cpu,csNum)	(0x1504 + ((csNum) * 8) + ((cpu) * 0x70)) 
+#define SCSR_SIZE_OFFS			24
+#define SCSR_SIZE_MASK			(0xff << SCSR_SIZE_OFFS)
+#define SCSR_SIZE_ALIGNMENT		0x1000000
+#define SCSR_WIN_EN			BIT0
+
+/* configuration register */
+#define SDRAM_CONFIG_REG   		(DRAM_BASE + 0x1400)
+#define SDRAM_REFRESH_OFFS 		0
+#define SDRAM_REFRESH_MAX  		0x3FFF
+#define SDRAM_REFRESH_MASK 		(SDRAM_REFRESH_MAX << SDRAM_REFRESH_OFFS)
+#define SDRAM_DWIDTH_OFFS       	15
+#define SDRAM_DWIDTH_MASK       	(1 << SDRAM_DWIDTH_OFFS)
+#define SDRAM_DWIDTH_32BIT      	(0 << SDRAM_DWIDTH_OFFS)
+#define SDRAM_DWIDTH_64BIT      	(1 << SDRAM_DWIDTH_OFFS)
+#define SDRAM_REGISTERED   		(1 << 17)
+#define SDRAM_ECC_OFFS    		18
+#define SDRAM_ECC_MASK    		(1 << SDRAM_ECC_OFFS)
+#define SDRAM_ECC_DIS     		(0 << SDRAM_ECC_OFFS)
+#define SDRAM_ECC_EN        		(1 << SDRAM_ECC_OFFS)
+#define SDRAM_IERR_OFFS    		19
+#define SDRAM_IERR_MASK    		(1 << SDRAM_IERR_OFFS)
+#define SDRAM_IERR_REPORTE     		(0 << SDRAM_IERR_OFFS)
+#define SDRAM_IERR_IGNORE      		(1 << SDRAM_IERR_OFFS)
+#define SDRAM_SRMODE_OFFS       	24
+#define SDRAM_SRMODE_MASK       	(1 << SDRAM_SRMODE_OFFS)
+#define SDRAM_SRMODE_POWER      	(0 << SDRAM_SRMODE_OFFS)
+#define SDRAM_SRMODE_DRAM       	(1 << SDRAM_SRMODE_OFFS)
+
+/* dunit control low register */
+#define SDRAM_DUNIT_CTRL_REG  		(DRAM_BASE + 0x1404)
+#define SDRAM_2T_OFFS			4
+#define SDRAM_2T_MASK			(1 << SDRAM_2T_OFFS)
+#define SDRAM_2T_MODE			(1 << SDRAM_2T_OFFS)
+
+#define SDRAM_SRCLK_OFFS		5
+#define SDRAM_SRCLK_MASK		(1 << SDRAM_SRCLK_OFFS)
+#define SDRAM_SRCLK_KEPT		(0 << SDRAM_SRCLK_OFFS)
+#define SDRAM_SRCLK_GATED		(1 << SDRAM_SRCLK_OFFS)
+#define SDRAM_CTRL_POS_OFFS	   	6
+#define SDRAM_CTRL_POS_MASK		(1 << SDRAM_CTRL_POS_OFFS)
+#define SDRAM_CTRL_POS_FALL	   	(0 << SDRAM_CTRL_POS_OFFS)
+#define SDRAM_CTRL_POS_RISE	   	(1 << SDRAM_CTRL_POS_OFFS)
+#define SDRAM_CLK1DRV_OFFS      	12
+#define SDRAM_CLK1DRV_MASK      	(1 << SDRAM_CLK1DRV_OFFS)
+#define SDRAM_CLK1DRV_HIGH_Z    	(0 << SDRAM_CLK1DRV_OFFS)
+#define SDRAM_CLK1DRV_NORMAL    	(1 << SDRAM_CLK1DRV_OFFS)
+#define SDRAM_CLK2DRV_OFFS      	13
+#define SDRAM_CLK2DRV_MASK      	(1 << SDRAM_CLK2DRV_OFFS)
+#define SDRAM_CLK2DRV_HIGH_Z    	(0 << SDRAM_CLK2DRV_OFFS)
+#define SDRAM_CLK2DRV_NORMAL    	(1 << SDRAM_CLK2DRV_OFFS)
+#define SDRAM_SB_OUT_DEL_OFFS 		20
+#define SDRAM_SB_OUT_DEL_MAX 		0xf
+#define SDRAM_SB_OUT_MASK 		(SDRAM_SB_OUT_DEL_MAX<<SDRAM_SB_OUT_DEL_OFFS)
+#define SDRAM_SB_IN_DEL_OFFS 		24
+#define SDRAM_SB_IN_DEL_MAX 		0xf
+#define SDRAM_SB_IN_MASK 		(SDRAM_SB_IN_DEL_MAX<<SDRAM_SB_IN_DEL_OFFS)
+
+/* dunit control hight register */
+#define SDRAM_DUNIT_CTRL_HI_REG  	(DRAM_BASE + 0x1424)
+#define SDRAM__D2P_OFFS			7
+#define SDRAM__D2P_EN			(1 << SDRAM__D2P_OFFS)
+#define SDRAM__P2D_OFFS			8
+#define SDRAM__P2D_EN			(1 << SDRAM__P2D_OFFS)
+#define SDRAM__ADD_HALF_FCC_OFFS	9
+#define SDRAM__ADD_HALF_FCC_EN		(1 << SDRAM__ADD_HALF_FCC_OFFS)
+#define SDRAM__PUP_ZERO_SKEW_OFFS	10
+#define SDRAM__PUP_ZERO_SKEW_EN		(1 << SDRAM__PUP_ZERO_SKEW_OFFS)
+#define SDRAM__WR_MESH_DELAY_OFFS	11
+#define SDRAM__WR_MESH_DELAY_EN		(1 << SDRAM__WR_MESH_DELAY_OFFS)
+
+/* sdram timing control low register */
+#define SDRAM_TIMING_CTRL_LOW_REG	(DRAM_BASE + 0x1408)
+#define SDRAM_TRCD_OFFS 		4
+#define SDRAM_TRCD_MASK 		(0xF << SDRAM_TRCD_OFFS)
+#define SDRAM_TRP_OFFS 			8
+#define SDRAM_TRP_MASK 			(0xF << SDRAM_TRP_OFFS)
+#define SDRAM_TWR_OFFS 			12
+#define SDRAM_TWR_MASK 			(0xF << SDRAM_TWR_OFFS)
+#define SDRAM_TWTR_OFFS 		16
+#define SDRAM_TWTR_MASK 		(0xF << SDRAM_TWTR_OFFS)
+#define SDRAM_TRAS_OFFS 		0
+#define SDRAM_TRAS_MASK 		(0xF << SDRAM_TRAS_OFFS)
+#define SDRAM_EXT_TRAS_OFFS 		20
+#define SDRAM_EXT_TRAS_MASK 		(0x1 << SDRAM_EXT_TRAS_OFFS)
+#define SDRAM_TRRD_OFFS 		24
+#define SDRAM_TRRD_MASK 		(0xF << SDRAM_TRRD_OFFS)
+#define SDRAM_TRTP_OFFS			28
+#define SDRAM_TRTP_MASK			(0xF << SDRAM_TRTP_OFFS)
+#define SDRAM_TRTP_DDR1 		(0x1 << SDRAM_TRTP_OFFS)
+
+/* sdram timing control high register */
+#define SDRAM_TIMING_CTRL_HIGH_REG	(DRAM_BASE + 0x140c)
+#define SDRAM_TRFC_OFFS 		0
+#define SDRAM_TRFC_MASK 		(0x3F << SDRAM_TRFC_OFFS)
+#define SDRAM_TR2R_OFFS 		7
+#define SDRAM_TR2R_MASK 		(0x3 << SDRAM_TR2R_OFFS)
+#define SDRAM_TR2W_W2R_OFFS		9
+#define SDRAM_TR2W_W2R_MASK		(0x3 << SDRAM_TR2W_W2R_OFFS)
+#define SDRAM_TW2W_OFFS			11
+#define SDRAM_TW2W_MASK			(0x3 << SDRAM_TW2W_OFFS)
+
+/* sdram DDR2 timing low register (SD2TLR) */
+#define SDRAM_DDR2_TIMING_LO_REG	(DRAM_BASE + 0x1428)
+#define SD2TLR_TODT_ON_RD_OFFS		4
+#define SD2TLR_TODT_ON_RD_MASK		(0xF << SD2TLR_TODT_ON_RD_OFFS)
+#define SD2TLR_TODT_OFF_RD_OFFS		8
+#define SD2TLR_TODT_OFF_RD_MASK		(0xF << SD2TLR_TODT_OFF_RD_OFFS)
+#define SD2TLR_TODT_ON_CTRL_RD_OFFS	12
+#define SD2TLR_TODT_ON_CTRL_RD_MASK	(0xF << SD2TLR_TODT_ON_CTRL_RD_OFFS)
+#define SD2TLR_TODT_OFF_CTRL_RD_OFFS	16
+#define SD2TLR_TODT_OFF_CTRL_RD_MASK	(0xF << SD2TLR_TODT_OFF_CTRL_RD_OFFS)
+
+/* sdram DDR2 timing high register (SD2TLR) */
+#define SDRAM_DDR2_TIMING_HI_REG	(DRAM_BASE + 0x147C)
+#define SD2THR_TODT_ON_WR_OFFS		0
+#define SD2THR_TODT_ON_WR_MASK		(0xF << SD2THR_TODT_ON_WR_OFFS)
+#define SD2THR_TODT_OFF_WR_OFFS		4
+#define SD2THR_TODT_OFF_WR_MASK		(0xF << SD2THR_TODT_OFF_WR_OFFS)
+#define SD2THR_TODT_ON_CTRL_WR_OFFS	8
+#define SD2THR_TODT_ON_CTRL_WR_MASK	(0xF << SD2THR_TODT_ON_CTRL_WR_OFFS)
+#define SD2THR_TODT_OFF_CTRL_WR_OFFS	12
+#define SD2THR_TODT_OFF_CTRL_WR_MASK	(0xF << SD2THR_TODT_OFF_CTRL_WR_OFFS)
+
+/* address control register */
+#define SDRAM_ADDR_CTRL_REG		(DRAM_BASE + 0x1410)
+#define SDRAM_ADDRSEL_OFFS(cs)		(4 * (cs))
+#define SDRAM_ADDRSEL_MASK(cs)		(0x3 << SDRAM_ADDRSEL_OFFS(cs))
+#define SDRAM_ADDRSEL_X8(cs)		(0x0 << SDRAM_ADDRSEL_OFFS(cs))
+#define SDRAM_ADDRSEL_X16(cs)		(0x1 << SDRAM_ADDRSEL_OFFS(cs))
+#define SDRAM_DSIZE_OFFS(cs)   	    	(2 + 4 * (cs))
+#define SDRAM_DSIZE_MASK(cs)   	    	(0x3 << SDRAM_DSIZE_OFFS(cs))
+#define SDRAM_DSIZE_256Mb(cs) 	    	(0x1 << SDRAM_DSIZE_OFFS(cs))
+#define SDRAM_DSIZE_512Mb(cs)  	    	(0x2 << SDRAM_DSIZE_OFFS(cs))
+#define SDRAM_DSIZE_1Gb(cs)  	    	(0x3 << SDRAM_DSIZE_OFFS(cs))
+#define SDRAM_DSIZE_2Gb(cs)  	    	(0x0 << SDRAM_DSIZE_OFFS(cs))
+
+/* SDRAM Open Pages Control registers */
+#define SDRAM_OPEN_PAGE_CTRL_REG	(DRAM_BASE + 0x1414)
+#define SDRAM_OPEN_PAGE_EN			(0 << 0)
+#define SDRAM_OPEN_PAGE_DIS			(1 << 0)
+
+/* sdram opertion register */
+#define SDRAM_OPERATION_REG 		(DRAM_BASE + 0x1418)
+#define SDRAM_CMD_OFFS  			0
+#define SDRAM_CMD_MASK   			(0xF << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_NORMAL 			(0x0 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_PRECHARGE_ALL 	(0x1 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_REFRESH_ALL 		(0x2 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_REG_SET_CMD 		(0x3 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_EXT_MODE_SET 		(0x4 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_NOP 				(0x5 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_SLF_RFRSH 		(0x7 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_EMRS2_CMD  		(0x8 << SDRAM_CMD_OFFS)
+#define SDRAM_CMD_EMRS3_CMD  		(0x9 << SDRAM_CMD_OFFS)
+
+/* sdram mode register */
+#define SDRAM_MODE_REG 				(DRAM_BASE + 0x141c)
+#define SDRAM_BURST_LEN_OFFS 		0
+#define SDRAM_BURST_LEN_MASK 		(0x7 << SDRAM_BURST_LEN_OFFS)
+#define SDRAM_BURST_LEN_4    		(0x2 << SDRAM_BURST_LEN_OFFS)
+#define SDRAM_CL_OFFS   			4
+#define SDRAM_CL_MASK   			(0x7 << SDRAM_CL_OFFS)
+#define SDRAM_DDR2_CL_3      		(0x3 << SDRAM_CL_OFFS)
+#define SDRAM_DDR2_CL_4      		(0x4 << SDRAM_CL_OFFS)
+#define SDRAM_DDR2_CL_5    		    (0x5 << SDRAM_CL_OFFS)
+#define SDRAM_DDR2_CL_6    		    (0x6 << SDRAM_CL_OFFS)
+
+#define SDRAM_TM_OFFS           	7
+#define SDRAM_TM_MASK           	(1 << SDRAM_TM_OFFS)
+#define SDRAM_TM_NORMAL         	(0 << SDRAM_TM_OFFS)
+#define SDRAM_TM_TEST_MODE      	(1 << SDRAM_TM_OFFS)
+#define SDRAM_DLL_OFFS         		8
+#define SDRAM_DLL_MASK          	(1 << SDRAM_DLL_OFFS)
+#define SDRAM_DLL_NORMAL        	(0 << SDRAM_DLL_OFFS)
+#define SDRAM_DLL_RESET 			(1 << SDRAM_DLL_OFFS)
+#define SDRAM_WR_OFFS				9
+#define SDRAM_WR_MAX				7
+#define SDRAM_WR_MASK				(SDRAM_WR_MAX << SDRAM_WR_OFFS)
+#define SDRAM_WR_2_CYC				(1 << SDRAM_WR_OFFS)
+#define SDRAM_WR_3_CYC				(2 << SDRAM_WR_OFFS)
+#define SDRAM_WR_4_CYC				(3 << SDRAM_WR_OFFS)
+#define SDRAM_WR_5_CYC				(4 << SDRAM_WR_OFFS)
+#define SDRAM_WR_6_CYC				(5 << SDRAM_WR_OFFS)
+#define SDRAM_PD_OFFS				12
+#define SDRAM_PD_MASK				(1 << SDRAM_PD_OFFS) 
+#define SDRAM_PD_FAST_EXIT			(0 << SDRAM_PD_OFFS) 
+#define SDRAM_PD_SLOW_EXIT			(1 << SDRAM_PD_OFFS) 
+
+/* DDR SDRAM Extended Mode register (DSEMR) */
+#define SDRAM_EXTENDED_MODE_REG		(DRAM_BASE + 0x1420)
+#define DSEMR_DLL_ENABLE			0
+#define DSEMR_DLL_DISABLE			1
+#define DSEMR_DS_OFFS				1
+#define DSEMR_DS_MASK				(1 << DSEMR_DS_OFFS)
+#define DSEMR_DS_NORMAL				(0 << DSEMR_DS_OFFS)
+#define DSEMR_DS_REDUCED			(1 << DSEMR_DS_OFFS)
+#define DSEMR_QOFF_OUTPUT_BUFF_EN	(0 << 12)
+#define DSEMR_RTT0_OFFS				2
+#define DSEMR_RTT1_OFFS				6
+#define DSEMR_RTT_ODT_DISABLE		((0 << DSEMR_RTT0_OFFS)||(0 << DSEMR_RTT1_OFFS))
+#define DSEMR_RTT_ODT_75_OHM		((1 << DSEMR_RTT0_OFFS)||(0 << DSEMR_RTT1_OFFS))
+#define DSEMR_RTT_ODT_150_OHM		((0 << DSEMR_RTT0_OFFS)||(1 << DSEMR_RTT1_OFFS))
+#define DSEMR_RTT_ODT_50_OHM		((1 << DSEMR_RTT0_OFFS)||(1 << DSEMR_RTT1_OFFS))
+#define DSEMR_DQS_OFFS				10
+#define DSEMR_DQS_MASK				(1 << DSEMR_DQS_OFFS)
+#define DSEMR_DQS_DIFFERENTIAL		(0 << DSEMR_DQS_OFFS)
+#define DSEMR_DQS_SINGLE_ENDED		(1 << DSEMR_DQS_OFFS)
+#define DSEMR_RDQS_ENABLE			(1 << 11)
+#define DSEMR_QOFF_OUTPUT_BUFF_EN	(0 << 12)
+#define DSEMR_QOFF_OUTPUT_BUFF_DIS	(1 << 12)
+
+/* DDR SDRAM Operation Control Register */
+#define SDRAM_OPERATION_CTRL_REG	(DRAM_BASE + 0x142c)
+
+/* Dunit FTDLL Configuration Register */
+#define SDRAM_FTDLL_CONFIG_LEFT_REG		(DRAM_BASE + 0x1484)
+#define SDRAM_FTDLL_CONFIG_RIGHT_REG		(DRAM_BASE + 0x161C)
+#define SDRAM_FTDLL_CONFIG_UP_REG		(DRAM_BASE + 0x1620)
+  
+/* Pads Calibration register */
+#define SDRAM_ADDR_CTRL_PADS_CAL_REG	(DRAM_BASE + 0x14c0)
+#define SDRAM_DATA_PADS_CAL_REG		    (DRAM_BASE + 0x14c4)
+#define SDRAM_DRVN_OFFS 			0
+#define SDRAM_DRVN_MASK 			(0x3F << SDRAM_DRVN_OFFS)
+#define SDRAM_DRVP_OFFS 			6
+#define SDRAM_DRVP_MASK 			(0x3F << SDRAM_DRVP_OFFS)
+#define SDRAM_PRE_DRIVER_STRENGTH_OFFS		12
+#define SDRAM_PRE_DRIVER_STRENGTH_MASK		(3 << SDRAM_PRE_DRIVER_STRENGTH_OFFS)
+#define SDRAM_TUNE_EN   		BIT16
+#define SDRAM_LOCKN_OFFS 			17
+#define SDRAM_LOCKN_MAKS 			(0x3F << SDRAM_LOCKN_OFFS)
+#define SDRAM_LOCKP_OFFS 			23
+#define SDRAM_LOCKP_MAKS 			(0x3F << SDRAM_LOCKP_OFFS)
+#define SDRAM_WR_EN     			(1 << 31)
+
+/* DDR2 SDRAM ODT Control (Low) Register (DSOCLR) */
+#define DDR2_SDRAM_ODT_CTRL_LOW_REG (DRAM_BASE + 0x1494)
+#define DSOCLR_ODT_RD_OFFS(odtNum)  (odtNum * 4)
+#define DSOCLR_ODT_RD_MASK(odtNum)  (0xf << DSOCLR_ODT_RD_OFFS(odtNum))
+#define DSOCLR_ODT_RD(odtNum, bank) ((1 << bank) << DSOCLR_ODT_RD_OFFS(odtNum))
+#define DSOCLR_ODT_WR_OFFS(odtNum)  (16 + (odtNum * 4))
+#define DSOCLR_ODT_WR_MASK(odtNum)  (0xf << DSOCLR_ODT_WR_OFFS(odtNum))
+#define DSOCLR_ODT_WR(odtNum, bank) ((1 << bank) << DSOCLR_ODT_WR_OFFS(odtNum))
+
+/* DDR2 SDRAM ODT Control (High) Register (DSOCHR) */
+#define DDR2_SDRAM_ODT_CTRL_HIGH_REG    	(DRAM_BASE + 0x1498)
+/* Optional control values to DSOCHR_ODT_EN macro */
+#define DDR2_ODT_CTRL_DUNIT         0
+#define DDR2_ODT_CTRL_NEVER         1
+#define DDR2_ODT_CTRL_ALWAYS        3
+#define DSOCHR_ODT_EN_OFFS(odtNum)  (odtNum * 2)
+#define DSOCHR_ODT_EN_MASK(odtNum)  (0x3 << DSOCHR_ODT_EN_OFFS(odtNum))
+#define DSOCHR_ODT_EN(odtNum, ctrl) (ctrl << DSOCHR_ODT_EN_OFFS(odtNum))
+
+/* DDR2 Dunit ODT Control Register (DDOCR)*/
+#define DDR2_DUNIT_ODT_CONTROL_REG  (DRAM_BASE + 0x149c)
+#define DDOCR_ODT_RD_OFFS          	0
+#define DDOCR_ODT_RD_MASK           (0xf << DDOCR_ODT_RD_OFFS)
+#define DDOCR_ODT_RD(bank)          ((1 << bank) << DDOCR_ODT_RD_OFFS)
+#define DDOCR_ODT_WR_OFFS           4
+#define DDOCR_ODT_WR_MASK           (0xf << DDOCR_ODT_WR_OFFS)
+#define DDOCR_ODT_WR(bank)          ((1 << bank) << DDOCR_ODT_WR_OFFS)
+#define DSOCR_ODT_EN_OFFS           8
+#define DSOCR_ODT_EN_MASK           (0x3 << DSOCR_ODT_EN_OFFS)
+/* For ctrl parameters see DDR2 SDRAM ODT Control (High) Register (0x1498) above. */
+#define DSOCR_ODT_EN(ctrl)         	(ctrl << DSOCR_ODT_EN_OFFS)
+#define DSOCR_ODT_SEL_DISABLE	    0	
+#define DSOCR_ODT_SEL_75_OHM	    2	
+#define DSOCR_ODT_SEL_150_OHM	    1
+#define DSOCR_ODT_SEL_50_OHM        3
+#define DSOCR_DQ_ODT_SEL_OFFS       10
+#define DSOCR_DQ_ODT_SEL_MASK       (0x3 << DSOCR_DQ_ODT_SEL_OFFS)
+#define DSOCR_DQ_ODT_SEL(odtSel)    (odtSel << DSOCR_DQ_ODT_SEL_OFFS)
+#define DSOCR_ST_ODT_SEL_OFFS       12
+#define DSOCR_ST_ODT_SEL_MASK       (0x3 << DSOCR_ST_ODT_SEL_OFFS)
+#define DSOCR_ST_ODT_SEL(odtSel)    (odtSel << DSOCR_ST_ODT_SEL_OFFS)
+#define DSOCR_ST_ODT_EN             (1 << 14)
+
+/* DDR SDRAM Initialization Control Register (DSICR) */
+#define DDR_SDRAM_INIT_CTRL_REG	    (DRAM_BASE + 0x1480)
+#define DSICR_INIT_EN		    	(1 << 0)
+#define DSICR_T200_SET		    	(1 << 8)
+
+/* sdram extended mode2 register (SEM2R) */
+#define SDRAM_EXTENDED_MODE2_REG	(DRAM_BASE + 0x148C)
+#define SEM2R_EMRS2_DDR2_OFFS		0
+#define SEM2R_EMRS2_DDR2_MASK		(0x7FFF << SEM2R_EMRS2_DDR2_OFFS)
+
+/* sdram extended mode3 register (SEM3R) */
+#define SDRAM_EXTENDED_MODE3_REG	(DRAM_BASE + 0x1490)
+#define SEM3R_EMRS3_DDR2_OFFS		0
+#define SEM3R_EMRS3_DDR2_MASK		(0x7FFF << SEM3R_EMRS3_DDR2_OFFS)
+
+/* sdram error registers */
+#define SDRAM_ERROR_CAUSE_REG               	(DRAM_BASE + 0x14d0)
+#define SDRAM_ERROR_MASK_REG                	(DRAM_BASE + 0x14d4)
+#define SDRAM_ERROR_DATA_LOW_REG            	(DRAM_BASE + 0x1444)
+#define SDRAM_ERROR_DATA_HIGH_REG           	(DRAM_BASE + 0x1440)
+#define SDRAM_ERROR_ADDR_REG                	(DRAM_BASE + 0x1450)
+#define SDRAM_ERROR_ECC_REG                 	(DRAM_BASE + 0x1448)
+#define SDRAM_CALC_ECC_REG                  	(DRAM_BASE + 0x144c)
+#define SDRAM_ECC_CONTROL_REG               	(DRAM_BASE + 0x1454)
+#define SDRAM_SINGLE_BIT_ERR_CNTR_REG 		(DRAM_BASE + 0x1458)
+#define SDRAM_DOUBLE_BIT_ERR_CNTR_REG 		(DRAM_BASE + 0x145c)
+
+/* SDRAM Error Cause Register (SECR) */
+#define SECR_SINGLE_BIT_ERR			BIT0
+#define SECR_DOUBLE_BIT_ERR			BIT1
+#define SECR_DATA_PATH_PARITY_ERR	BIT2
+/* SDRAM Error Address Register (SEAR) */
+#define SEAR_ERR_TYPE_OFFS			0
+#define SEAR_ERR_TYPE_MASK      	(1 << SEAR_ERR_TYPE_OFFS)
+#define SEAR_ERR_TYPE_SINGLE    	0	
+#define SEAR_ERR_TYPE_DOUBLE    	(1 << SEAR_ERR_TYPE_OFFS)
+#define SEAR_ERR_CS_OFFS			1
+#define SEAR_ERR_CS_MASK			(3 << SEAR_ERR_CS_OFFS)
+#define SEAR_ERR_CS(csNum)			(csNum << SEAR_ERR_CS_OFFS)
+#define SEAR_ERR_ADDR_OFFS      	3
+#define SEAR_ERR_ADDR_MASK      	(0x1FFFFFFF << SEAR_ERR_ADDR_OFFS)
+
+/* SDRAM ECC Control Register (SECR) */
+#define SECR_FORCEECC_OFFS          0
+#define SECR_FORCEECC_MASK          (0xFF << SECR_FORCEECC_OFFS)
+#define SECR_FORCEEN_OFFS           8
+#define SECR_FORCEEN_MASK           (1 << SECR_FORCEEN_OFFS)
+#define SECR_ECC_CALC_MASK          (0 << SECR_FORCEEN_OFFS)
+#define SECR_ECC_USER_MASK          (1 << SECR_FORCEEN_OFFS)
+#define SECR_PERRPROP_EN            BIT9
+#define SECR_CNTMODE_OFFS           10
+#define SECR_CNTMODE_MASK           (1 << SECR_CNTMODE_OFFS)
+#define SECR_ALL_IN_CS0             (0 << SECR_CNTMODE_OFFS)
+#define SECR_NORMAL_COUNTER         (1 << SECR_CNTMODE_OFFS)
+#define SECR_THRECC_OFFS            16
+#define SECR_THRECC_MAX             0xFF
+#define SECR_THRECC_MASK            (SECR_THRECC_MAX << SECR_THRECC_OFFS)
+#define SECR_THRECC(threshold)      (threshold << SECR_THRECC_OFFS)
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __INCmvDramIfRegsh */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfStaticInit.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfStaticInit.h
new file mode 100644
index 0000000000..f3bf83b4ea
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfStaticInit.h
@@ -0,0 +1,179 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvDramIfStaticInith
+#define __INCmvDramIfStaticInith
+
+#ifdef MV_STATIC_DRAM_ON_BOARD
+#define STATIC_DRAM_BANK_1
+#undef	STATIC_DRAM_BANK_2             
+#undef	STATIC_DRAM_BANK_3                         
+#undef 	STATIC_DRAM_BANK_4             
+
+
+#ifdef MV_DIMM_TS256MLQ72V5U
+#define	STATIC_DRAM_BANK_2             
+#define	STATIC_DRAM_BANK_3                         
+#undef 	STATIC_DRAM_BANK_4             
+
+#define STATIC_SDRAM_CONFIG_REG		    0x4724481A  /* offset 0x1400 - DMA reg-0xf1000814 */ 
+#define STATIC_SDRAM_DUNIT_CTRL_REG         0x37707450  /* offset 0x1404 - DMA reg-0xf100081c */ 
+#define STATIC_SDRAM_TIMING_CTRL_LOW_REG    0x11A13330  /* offset 0x1408 - DMA reg-0xf1000824 */ 
+#define STATIC_SDRAM_TIMING_CTRL_HIGH_REG   0x00000601  /* offset 0x140c - DMA reg-0xf1000828 */ 
+#define STATIC_SDRAM_ADDR_CTRL_REG          0x00001CB2  /* offset 0x1410 - DMA reg-0xf1000820 */ 
+#define STATIC_SDRAM_MODE_REG               0x00000642  /* offset 0x141c - DMA reg-0xf1000818 */ 
+#define STATIC_SDRAM_ODT_CTRL_LOW	    0x030C030C /*   0x1494  */  
+#define STATIC_SDRAM_ODT_CTRL_HI	    0x00000000 /*   0x1498  */  
+#define STATIC_SDRAM_DUNIT_ODT_CTRL    	    0x0000740F /*   0x149c  */  
+#define STATIC_SDRAM_EXT_MODE          	    0x00000404 /*   0x1420  */  
+#define STATIC_SDRAM_DDR2_TIMING_LO         0x00074410 /*   0x1428  */  
+#define STATIC_SDRAM_DDR2_TIMING_HI         0x00007441 /*   0x147C  */  
+
+#define STATIC_SDRAM_RANK0_SIZE_DIMM0       0x3FFF /* size bank0 dimm0   - DMA reg-0xf1000810 */ 
+#define STATIC_SDRAM_RANK1_SIZE_DIMM0       0x3FFF /* size bank1 dimm0   */ 
+#define STATIC_SDRAM_RANK0_SIZE_DIMM1       0x3FFF /* size bank0 dimm1   */ 
+#define STATIC_SDRAM_RANK1_SIZE_DIMM1       0x0	   /* size bank1 dimm1   */ 
+
+#endif /* TS256MLQ72V5U */
+
+
+#ifdef MV_MT9VDDT3272AG
+/* one DIMM 256M  */
+#define STATIC_SDRAM_CONFIG_REG		    0x5820040d  /* offset 0x1400 - DMA reg-0xf1000814 */ 
+#define STATIC_SDRAM_DUNIT_CTRL_REG         0xC4000540  /* offset 0x1404 - DMA reg-0xf100081c */ 
+#define STATIC_SDRAM_TIMING_CTRL_LOW_REG    0x01602220  /* offset 0x1408 - DMA reg-0xf1000824 */ 
+#define STATIC_SDRAM_TIMING_CTRL_HIGH_REG   0x0000000b  /* offset 0x140c - DMA reg-0xf1000828 */ 
+#define STATIC_SDRAM_ADDR_CTRL_REG          0x00000012  /* offset 0x1410 - DMA reg-0xf1000820 */ 
+#define STATIC_SDRAM_MODE_REG               0x00000062  /* offset 0x141c - DMA reg-0xf1000818 */ 
+#define STATIC_SDRAM_RANK0_SIZE_DIMM0       0x0fff /* size bank0 dimm0   - DMA reg-0xf1000810 */ 
+#define STATIC_SDRAM_RANK0_SIZE_DIMM1       0x0    /* size bank0 dimm1   */ 
+
+#endif /* MV_MT9VDDT3272AG */
+
+
+
+#ifdef MV_D27RB12P
+/* 
+Two DIMM 512M + ECC enabled, Registered DIMM  CAS Latency 2.5
+*/
+
+#define STATIC_SDRAM_CONFIG_REG		    0x6826081E  /* offset 0x1400 - DMA reg-0xf1000814 */ 
+#define STATIC_SDRAM_DUNIT_CTRL_REG         0xC5000540  /* offset 0x1404 - DMA reg-0xf100081c */ 
+#define STATIC_SDRAM_TIMING_CTRL_LOW_REG    0x01501220  /* offset 0x1408 - DMA reg-0xf1000824 */ 
+#define STATIC_SDRAM_TIMING_CTRL_HIGH_REG   0x00000009  /* offset 0x140c - DMA reg-0xf1000828 */ 
+#define STATIC_SDRAM_ADDR_CTRL_REG          0x00000012  /* offset 0x1410 - DMA reg-0xf1000820 */ 
+#define STATIC_SDRAM_MODE_REG               0x00000062  /* offset 0x141c - DMA reg-0xf1000818 */ 
+#define STATIC_SDRAM_RANK0_SIZE_DIMM0       0x0FFF /* size bank0 dimm0   - DMA reg-0xf1000810 */ 
+#define STATIC_SDRAM_RANK0_SIZE_DIMM1       0x0FFF    /* size bank0 dimm1   */ 
+
+#define STATIC_DRAM_BANK_2             
+
+#define STATIC_DRAM_BANK_3                         
+#define STATIC_DRAM_BANK_4             
+
+#endif /*  mv_D27RB12P  */
+
+#ifdef RD_MV645XX
+
+#define STATIC_MEM_TYPE				MEM_TYPE_DDR2
+#define STATIC_DIMM_INFO_BANK0_SIZE		256
+/* DDR2 boards 256 MB*/
+
+#define STATIC_SDRAM_RANK0_SIZE_DIMM0       	0x00000fff /* size bank0 dimm0   - DMA reg-0xf1000810 */ 
+#define STATIC_SDRAM_CONFIG_REG	     		0x07190618	
+#define STATIC_SDRAM_MODE_REG	     		0x00000432	
+#define STATIC_SDRAM_DUNIT_CTRL_REG     	0xf4a03440
+#define STATIC_SDRAM_ADDR_CTRL_REG	     	0x00000022
+#define STATIC_SDRAM_TIMING_CTRL_LOW_REG    	0x11712220
+#define STATIC_SDRAM_TIMING_CTRL_HIGH_REG	0x00000504
+#define STATIC_SDRAM_ODT_CTRL_LOW	     	0x84210000
+#define STATIC_SDRAM_ODT_CTRL_HI	     	0x00000000
+#define STATIC_SDRAM_DUNIT_ODT_CTRL    		0x0000780f
+#define STATIC_SDRAM_EXT_MODE          		0x00000440
+#define STATIC_SDRAM_DDR2_TIMING_LO         	0x00063300
+#define STATIC_SDRAM_DDR2_TIMING_HI         	0x00006330
+#endif /* RD_MV645XX */
+
+#if MV_DIMM_M3783354CZ3_CE6 
+
+#define STATIC_SDRAM_RANK0_SIZE_DIMM0		0x00000FFF /* 0x2010 size bank0 dimm0   - DMA reg-0xf1000810 */ 
+#define STATIC_SDRAM_CONFIG_REG	     		0x07190618 /*   0x1400  */ 
+#define STATIC_SDRAM_MODE_REG	     		0x00000432 /*   0x141c  */  
+#define STATIC_SDRAM_DUNIT_CTRL_REG     	0xf4a03440 /*   0x1404  */  
+#define STATIC_SDRAM_ADDR_CTRL_REG	     	0x00000022 /*   0x1410  */  
+#define STATIC_SDRAM_TIMING_CTRL_LOW_REG	0x11712220 /*   0x1408  */  
+#define STATIC_SDRAM_TIMING_CTRL_HIGH_REG	0x00000504 /*   0x140c  */  
+#define STATIC_SDRAM_ODT_CTRL_LOW	     	0x84210000 /*   0x1494  */  
+#define STATIC_SDRAM_ODT_CTRL_HI	     	0x00000000 /*   0x1498  */  
+#define STATIC_SDRAM_DUNIT_ODT_CTRL    		0x0000780f /*   0x149c  */  
+#define STATIC_SDRAM_EXT_MODE          		0x00000440 /*   0x1420  */  
+#define STATIC_SDRAM_DDR2_TIMING_LO		0x00063300 /*   0x1428  */  
+#define STATIC_SDRAM_DDR2_TIMING_HI		0x00006330 /*   0x147C  */  
+
+#endif /* MV_DIMM_M3783354CZ3_CE6 */
+
+#endif /* MV_STATIC_DRAM_ON_BOARD */
+#endif /* __INCmvDramIfStaticInith */
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/spd/mvSpd.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/spd/mvSpd.c
new file mode 100644
index 0000000000..7a26f90597
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/spd/mvSpd.c
@@ -0,0 +1,1474 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "ddr2/spd/mvSpd.h"
+#include "boardEnv/mvBoardEnvLib.h"
+
+/* #define MV_DEBUG */
+#ifdef MV_DEBUG
+#define DB(x) x
+#else
+#define DB(x)
+#endif
+
+static MV_VOID cpyDimm2BankInfo(MV_DIMM_INFO *pDimmInfo, 
+                                            MV_DRAM_BANK_INFO *pBankInfo);
+static MV_U32  cas2ps(MV_U8 spd_byte);
+/*******************************************************************************
+* mvDramBankGet - Get the DRAM bank paramters.
+*
+* DESCRIPTION:
+*       This function retrieves DRAM bank parameters as described in 
+*       DRAM_BANK_INFO struct to the controller DRAM unit. In case the board 
+*       has its DRAM on DIMMs it will use its EEPROM to extract SPD data
+*       from it. Otherwise, if the DRAM is soldered on board, the function 
+*       should insert its bank information into MV_DRAM_BANK_INFO struct.
+*
+* INPUT:
+*       bankNum  - Board DRAM bank number.
+*
+* OUTPUT:
+*       pBankInfo  - DRAM bank information struct.
+*
+* RETURN:
+*       MV_FAIL - Bank parameters could not be read.
+*
+*******************************************************************************/
+MV_STATUS mvDramBankInfoGet(MV_U32 bankNum, MV_DRAM_BANK_INFO *pBankInfo)
+{
+    MV_DIMM_INFO dimmInfo;
+
+    DB(mvOsPrintf("Dram: mvDramBankInfoGet bank %d\n", bankNum)); 
+    /* zero pBankInfo structure */
+
+    if((NULL == pBankInfo) || (bankNum >= MV_DRAM_MAX_CS ))
+    {
+        DB(mvOsPrintf("Dram: mvDramBankInfoGet bad params \n")); 
+        return MV_BAD_PARAM;
+    }
+    memset(pBankInfo, 0, sizeof(*pBankInfo));
+
+	if ( MV_OK != dimmSpdGet((MV_U32)(bankNum/2), &dimmInfo))
+	{
+		DB(mvOsPrintf("Dram: ERR dimmSpdGet failed to get dimm info \n"));
+		return MV_FAIL;
+	}
+	if ((dimmInfo.numOfModuleBanks == 1) && ((bankNum % 2) == 1))
+	{
+		DB(mvOsPrintf("Dram: ERR dimmSpdGet. Can't find DIMM bank 2 \n"));
+		return MV_FAIL;
+	}
+	/* convert Dimm info to Bank info */
+    cpyDimm2BankInfo(&dimmInfo, pBankInfo);
+    return MV_OK;
+}
+
+/*******************************************************************************
+* cpyDimm2BankInfo - Convert a Dimm info struct into a bank info struct.
+*
+* DESCRIPTION:
+*       Convert a Dimm info struct into a bank info struct.
+*
+* INPUT:
+*       pDimmInfo - DIMM information structure.
+*
+* OUTPUT:
+*       pBankInfo  - DRAM bank information struct.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+static MV_VOID cpyDimm2BankInfo(MV_DIMM_INFO *pDimmInfo, 
+                                                MV_DRAM_BANK_INFO *pBankInfo)
+{
+    pBankInfo->memoryType = pDimmInfo->memoryType;        
+
+    /* DIMM dimensions */
+    pBankInfo->numOfRowAddr = pDimmInfo->numOfRowAddr;
+    pBankInfo->numOfColAddr = pDimmInfo->numOfColAddr;
+    pBankInfo->dataWidth = pDimmInfo->dataWidth;
+    pBankInfo->errorCheckType = pDimmInfo->errorCheckType;             
+    pBankInfo->sdramWidth = pDimmInfo->sdramWidth;
+    pBankInfo->errorCheckDataWidth = pDimmInfo->errorCheckDataWidth;   
+    pBankInfo->numOfBanksOnEachDevice = pDimmInfo->numOfBanksOnEachDevice;
+    pBankInfo->suportedCasLatencies = pDimmInfo->suportedCasLatencies;
+    pBankInfo->refreshInterval = pDimmInfo->refreshInterval;
+ 
+    /* DIMM timing parameters */
+    pBankInfo->minCycleTimeAtMaxCasLatPs = pDimmInfo->minCycleTimeAtMaxCasLatPs;
+    pBankInfo->minCycleTimeAtMaxCasLatMinus1Ps = 
+                                    pDimmInfo->minCycleTimeAtMaxCasLatMinus1Ps;
+    pBankInfo->minCycleTimeAtMaxCasLatMinus2Ps = 
+                                    pDimmInfo->minCycleTimeAtMaxCasLatMinus2Ps;
+
+    pBankInfo->minRowPrechargeTime     = pDimmInfo->minRowPrechargeTime;     
+    pBankInfo->minRowActiveToRowActive = pDimmInfo->minRowActiveToRowActive;
+    pBankInfo->minRasToCasDelay        = pDimmInfo->minRasToCasDelay;       
+    pBankInfo->minRasPulseWidth        = pDimmInfo->minRasPulseWidth;       
+    pBankInfo->minWriteRecoveryTime    = pDimmInfo->minWriteRecoveryTime;
+    pBankInfo->minWriteToReadCmdDelay  = pDimmInfo->minWriteToReadCmdDelay;
+    pBankInfo->minReadToPrechCmdDelay  = pDimmInfo->minReadToPrechCmdDelay;
+    pBankInfo->minRefreshToActiveCmd   = pDimmInfo->minRefreshToActiveCmd;
+               
+    /* Parameters calculated from the extracted DIMM information */
+    pBankInfo->size = pDimmInfo->size/pDimmInfo->numOfModuleBanks;
+    pBankInfo->deviceDensity = pDimmInfo->deviceDensity;              
+    pBankInfo->numberOfDevices = pDimmInfo->numberOfDevices /
+                                 pDimmInfo->numOfModuleBanks;
+ 
+    /* DIMM attributes (MV_TRUE for yes) */
+
+    if ((pDimmInfo->memoryType == MEM_TYPE_SDRAM) ||
+        (pDimmInfo->memoryType == MEM_TYPE_DDR1)   )
+    {   
+        if (pDimmInfo->dimmAttributes & BIT1)
+            pBankInfo->registeredAddrAndControlInputs = MV_TRUE;
+        else
+            pBankInfo->registeredAddrAndControlInputs = MV_FALSE;
+    }
+    else /* pDimmInfo->memoryType == MEM_TYPE_DDR2 */
+    {
+        if (pDimmInfo->dimmTypeInfo & (BIT0 | BIT4))
+            pBankInfo->registeredAddrAndControlInputs = MV_TRUE;
+        else
+            pBankInfo->registeredAddrAndControlInputs = MV_FALSE;
+    }
+
+    return;
+}
+/*******************************************************************************
+* dimmSpdCpy - Cpy SPD parameters from dimm 0 to dimm 1.
+*
+* DESCRIPTION:
+*       Read the DIMM SPD parameters from dimm 0 into dimm 1 SPD.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_TRUE if function could read DIMM parameters, MV_FALSE otherwise.
+*
+*******************************************************************************/
+MV_STATUS dimmSpdCpy(MV_VOID)
+{
+    MV_U32 i;
+    MV_U32 spdChecksum;
+     
+    MV_TWSI_SLAVE twsiSlave;
+    MV_U8 data[SPD_SIZE];
+
+    /* zero dimmInfo structure */
+    memset(data, 0, SPD_SIZE);
+
+    /* read the dimm eeprom */
+    DB(mvOsPrintf("DRAM: Read Dimm eeprom\n"));
+    twsiSlave.slaveAddr.address = MV_BOARD_DIMM0_I2C_ADDR;
+    twsiSlave.slaveAddr.type = ADDR7_BIT;
+    twsiSlave.validOffset = MV_TRUE;
+    twsiSlave.offset = 0;
+    twsiSlave.moreThen256 = MV_FALSE;
+
+    if( MV_OK != mvTwsiRead (MV_BOARD_DIMM_I2C_CHANNEL, &twsiSlave, data, SPD_SIZE) )
+    {
+        DB(mvOsPrintf("DRAM: ERR. no DIMM in dimmNum 0\n"));
+        return MV_FAIL;
+    }
+    DB(puts("DRAM: Reading dimm info succeded.\n"));
+    
+    /* calculate SPD checksum */
+    spdChecksum = 0;
+    
+    for(i = 0 ; i <= 62 ; i++)
+    {
+        spdChecksum += data[i];
+    }
+    
+    if ((spdChecksum & 0xff) != data[63])
+    {
+        DB(mvOsPrintf("DRAM: Warning. Wrong SPD Checksum %2x, expValue=%2x\n",
+                            (MV_U32)(spdChecksum & 0xff), data[63]));
+    }
+    else
+    {
+        DB(mvOsPrintf("DRAM: SPD Checksum ok!\n"));
+    }
+
+    /* copy the SPD content 1:1 into the DIMM 1 SPD */
+    twsiSlave.slaveAddr.address = MV_BOARD_DIMM1_I2C_ADDR;
+    twsiSlave.slaveAddr.type = ADDR7_BIT;
+    twsiSlave.validOffset = MV_TRUE;
+    twsiSlave.offset = 0;
+    twsiSlave.moreThen256 = MV_FALSE;
+
+    for(i = 0 ; i < SPD_SIZE ; i++)
+    {
+	twsiSlave.offset = i;
+	if( MV_OK != mvTwsiWrite (MV_BOARD_DIMM_I2C_CHANNEL, &twsiSlave, &data[i], 1) )
+	{
+	    mvOsPrintf("DRAM: ERR. no DIMM in dimmNum 1 byte %d \n",i);
+	    return MV_FAIL;
+	}
+	mvOsDelay(5);
+    }
+    
+    DB(puts("DRAM: Reading dimm info succeded.\n"));
+    return MV_OK;
+}
+
+/*******************************************************************************
+* dimmSpdGet - Get the SPD parameters.
+*
+* DESCRIPTION:
+*       Read the DIMM SPD parameters into given struct parameter.
+*
+* INPUT:
+*       dimmNum - DIMM number. See MV_BOARD_DIMM_NUM enumerator.
+*
+* OUTPUT:
+*       pDimmInfo - DIMM information structure.
+*
+* RETURN:
+*       MV_TRUE if function could read DIMM parameters, MV_FALSE otherwise.
+*
+*******************************************************************************/
+MV_STATUS dimmSpdGet(MV_U32 dimmNum, MV_DIMM_INFO *pDimmInfo)
+{
+    MV_U32 i;
+    MV_U32 density = 1;
+    MV_U32 spdChecksum;
+     
+    MV_TWSI_SLAVE twsiSlave;
+    MV_U8 data[SPD_SIZE];
+
+    if((NULL == pDimmInfo)|| (dimmNum >= MAX_DIMM_NUM))
+    {
+        DB(mvOsPrintf("Dram: mvDramBankInfoGet bad params \n")); 
+        return MV_BAD_PARAM;
+    }
+
+    /* zero dimmInfo structure */
+    memset(data, 0, SPD_SIZE);
+
+    /* read the dimm eeprom */
+    DB(mvOsPrintf("DRAM: Read Dimm eeprom\n"));
+    twsiSlave.slaveAddr.address = (dimmNum == 0) ?
+                            MV_BOARD_DIMM0_I2C_ADDR : MV_BOARD_DIMM1_I2C_ADDR;
+    twsiSlave.slaveAddr.type = ADDR7_BIT;
+    twsiSlave.validOffset = MV_TRUE;
+    twsiSlave.offset = 0;
+    twsiSlave.moreThen256 = MV_FALSE;
+
+    if( MV_OK != mvTwsiRead (MV_BOARD_DIMM_I2C_CHANNEL, &twsiSlave, data, SPD_SIZE) )
+    {
+        DB(mvOsPrintf("DRAM: ERR. no DIMM in dimmNum %d \n", dimmNum));
+        return MV_FAIL;
+    }
+    DB(puts("DRAM: Reading dimm info succeded.\n"));
+    
+    /* calculate SPD checksum */
+    spdChecksum = 0;
+    
+        for(i = 0 ; i <= 62 ; i++)
+        {
+        spdChecksum += data[i];
+    }
+    
+    if ((spdChecksum & 0xff) != data[63])
+    {
+        DB(mvOsPrintf("DRAM: Warning. Wrong SPD Checksum %2x, expValue=%2x\n",
+                            (MV_U32)(spdChecksum & 0xff), data[63]));
+    }
+    else
+    {
+        DB(mvOsPrintf("DRAM: SPD Checksum ok!\n"));
+    }
+
+    /* copy the SPD content 1:1 into the dimmInfo structure*/
+    for(i = 0 ; i < SPD_SIZE ; i++)
+    {
+        pDimmInfo->spdRawData[i] = data[i];
+        DB(mvOsPrintf("SPD-EEPROM Byte %3d = %3x (%3d)\n",i, data[i], data[i]));
+    }
+
+    DB(mvOsPrintf("DRAM SPD Information:\n"));
+
+    /* Memory type (DDR / SDRAM) */
+    switch (data[DIMM_MEM_TYPE])
+    {
+        case (DIMM_MEM_TYPE_SDRAM):
+            pDimmInfo->memoryType = MEM_TYPE_SDRAM;
+            DB(mvOsPrintf("DRAM Memeory type SDRAM\n"));
+            break;
+        case (DIMM_MEM_TYPE_DDR1):
+            pDimmInfo->memoryType = MEM_TYPE_DDR1;
+            DB(mvOsPrintf("DRAM Memeory type DDR1\n"));
+            break;
+        case (DIMM_MEM_TYPE_DDR2):
+            pDimmInfo->memoryType = MEM_TYPE_DDR2;
+            DB(mvOsPrintf("DRAM Memeory type DDR2\n"));
+            break;
+        default:
+            mvOsPrintf("ERROR: Undefined memory type!\n");
+            return MV_ERROR;
+    }
+
+    
+    /* Number Of Row Addresses */
+    pDimmInfo->numOfRowAddr = data[DIMM_ROW_NUM];
+    DB(mvOsPrintf("DRAM numOfRowAddr[3]         %d\n",pDimmInfo->numOfRowAddr));
+        
+    /* Number Of Column Addresses */
+    pDimmInfo->numOfColAddr = data[DIMM_COL_NUM];
+    DB(mvOsPrintf("DRAM numOfColAddr[4]         %d\n",pDimmInfo->numOfColAddr));
+        
+    /* Number Of Module Banks */
+    pDimmInfo->numOfModuleBanks = data[DIMM_MODULE_BANK_NUM];
+    DB(mvOsPrintf("DRAM numOfModuleBanks[5]     0x%x\n", 
+                                                  pDimmInfo->numOfModuleBanks));
+        
+    /* Number of module banks encoded differently for DDR2 */
+    if (pDimmInfo->memoryType == MEM_TYPE_DDR2)
+        pDimmInfo->numOfModuleBanks = (pDimmInfo->numOfModuleBanks & 0x7)+1;
+
+    /* Data Width */
+    pDimmInfo->dataWidth = data[DIMM_DATA_WIDTH];
+    DB(mvOsPrintf("DRAM dataWidth[6]            0x%x\n", pDimmInfo->dataWidth));
+        
+    /* Minimum Cycle Time At Max CasLatancy */
+    pDimmInfo->minCycleTimeAtMaxCasLatPs = cas2ps(data[DIMM_MIN_CC_AT_MAX_CAS]);
+
+    /* Error Check Type */
+    pDimmInfo->errorCheckType = data[DIMM_ERR_CHECK_TYPE];
+    DB(mvOsPrintf("DRAM errorCheckType[11]      0x%x\n", 
+                                                    pDimmInfo->errorCheckType));
+
+    /* Refresh Interval */
+    pDimmInfo->refreshInterval = data[DIMM_REFRESH_INTERVAL];
+    DB(mvOsPrintf("DRAM refreshInterval[12]     0x%x\n", 
+                                                   pDimmInfo->refreshInterval));
+    
+    /* Sdram Width */
+    pDimmInfo->sdramWidth = data[DIMM_SDRAM_WIDTH];
+    DB(mvOsPrintf("DRAM sdramWidth[13]          0x%x\n",pDimmInfo->sdramWidth));
+        
+    /* Error Check Data Width */
+    pDimmInfo->errorCheckDataWidth = data[DIMM_ERR_CHECK_DATA_WIDTH];
+    DB(mvOsPrintf("DRAM errorCheckDataWidth[14] 0x%x\n", 
+                                               pDimmInfo->errorCheckDataWidth));
+    
+    /* Burst Length Supported */
+    /*     SDRAM/DDR1:
+                    *******-******-******-******-******-******-******-******* 
+                    * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * 
+                    *******-******-******-******-******-******-******-******* 
+    burst length =  * Page | TBD  | TBD  | TBD  |  8   |  4   |  2   |   1  * 
+                    *********************************************************/ 
+    /*     DDR2:
+                    *******-******-******-******-******-******-******-******* 
+                    * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * 
+                    *******-******-******-******-******-******-******-******* 
+    burst length =  * Page | TBD  | TBD  | TBD  |  8   |  4   | TBD  | TBD  * 
+                    *********************************************************/ 
+
+    pDimmInfo->burstLengthSupported = data[DIMM_BURST_LEN_SUP];
+    DB(mvOsPrintf("DRAM burstLengthSupported[16] 0x%x\n", 
+                                              pDimmInfo->burstLengthSupported));
+    
+    /* Number Of Banks On Each Device */
+    pDimmInfo->numOfBanksOnEachDevice = data[DIMM_DEV_BANK_NUM];
+    DB(mvOsPrintf("DRAM numOfBanksOnEachDevice[17] 0x%x\n", 
+                                            pDimmInfo->numOfBanksOnEachDevice));
+    
+    /* Suported Cas Latencies */
+                   
+    /*      SDRAM:
+            *******-******-******-******-******-******-******-******* 
+            * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * 
+            *******-******-******-******-******-******-******-******* 
+    CAS =   * TBD  |  7   |  6   |  5   |  4   |  3   |   2  |   1  * 
+            ********************************************************/ 
+
+    /*     DDR 1:
+            *******-******-******-******-******-******-******-******* 
+            * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * 
+            *******-******-******-******-******-******-******-******* 
+    CAS =   * TBD  |  4   | 3.5  |   3  | 2.5  |  2   | 1.5  |   1  * 
+            *********************************************************/
+
+    /*     DDR 2:
+            *******-******-******-******-******-******-******-******* 
+            * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * 
+            *******-******-******-******-******-******-******-******* 
+    CAS =   * TBD  | TBD  |  5   |  4   |  3   |  2   | TBD  | TBD  * 
+            *********************************************************/
+    
+    pDimmInfo->suportedCasLatencies = data[DIMM_SUP_CAL];
+    DB(mvOsPrintf("DRAM suportedCasLatencies[18]    0x%x\n", 
+                                              pDimmInfo->suportedCasLatencies));
+
+    /* For DDR2 only, get the DIMM type information */
+    if (pDimmInfo->memoryType == MEM_TYPE_DDR2)
+    {   
+        pDimmInfo->dimmTypeInfo = data[DIMM_DDR2_TYPE_INFORMATION];
+        DB(mvOsPrintf("DRAM dimmTypeInfo[20] (DDR2) 0x%x\n", 
+                                                      pDimmInfo->dimmTypeInfo));
+    }
+
+    /* SDRAM Modules Attributes */
+    pDimmInfo->dimmAttributes = data[DIMM_BUF_ADDR_CONT_IN];
+    DB(mvOsPrintf("DRAM dimmAttributes[21]          0x%x\n",    
+                                                    pDimmInfo->dimmAttributes));
+    
+    /* Minimum Cycle Time At Max CasLatancy Minus 1*/
+    pDimmInfo->minCycleTimeAtMaxCasLatMinus1Ps = 
+                                    cas2ps(data[DIMM_MIN_CC_AT_MAX_CAS_MINUS1]);
+
+    /* Minimum Cycle Time At Max CasLatancy Minus 2*/
+    pDimmInfo->minCycleTimeAtMaxCasLatMinus2Ps = 
+                                    cas2ps(data[DIMM_MIN_CC_AT_MAX_CAS_MINUS2]);
+
+    pDimmInfo->minRowPrechargeTime = data[DIMM_MIN_ROW_PRECHARGE_TIME];
+    DB(mvOsPrintf("DRAM minRowPrechargeTime[27]     0x%x\n", 
+                                               pDimmInfo->minRowPrechargeTime));
+    pDimmInfo->minRowActiveToRowActive = data[DIMM_MIN_ROW_ACTIVE_TO_ROW_ACTIVE];
+    DB(mvOsPrintf("DRAM minRowActiveToRowActive[28] 0x%x\n", 
+                                           pDimmInfo->minRowActiveToRowActive));
+    pDimmInfo->minRasToCasDelay = data[DIMM_MIN_RAS_TO_CAS_DELAY];
+    DB(mvOsPrintf("DRAM minRasToCasDelay[29]        0x%x\n", 
+                                                  pDimmInfo->minRasToCasDelay));
+    pDimmInfo->minRasPulseWidth = data[DIMM_MIN_RAS_PULSE_WIDTH];
+    DB(mvOsPrintf("DRAM minRasPulseWidth[30]        0x%x\n", 
+                                                  pDimmInfo->minRasPulseWidth));
+        
+    /* DIMM Bank Density */
+    pDimmInfo->dimmBankDensity = data[DIMM_BANK_DENSITY];
+    DB(mvOsPrintf("DRAM dimmBankDensity[31]         0x%x\n", 
+                                                   pDimmInfo->dimmBankDensity));
+
+    /* Only DDR2 includes Write Recovery Time field. Other SDRAM ignore     */
+    pDimmInfo->minWriteRecoveryTime = data[DIMM_MIN_WRITE_RECOVERY_TIME];
+    DB(mvOsPrintf("DRAM minWriteRecoveryTime[36]    0x%x\n", 
+                                              pDimmInfo->minWriteRecoveryTime));
+    
+    /* Only DDR2 includes Internal Write To Read Command Delay field.       */
+    pDimmInfo->minWriteToReadCmdDelay = data[DIMM_MIN_WRITE_TO_READ_CMD_DELAY];
+    DB(mvOsPrintf("DRAM minWriteToReadCmdDelay[37]  0x%x\n", 
+                                            pDimmInfo->minWriteToReadCmdDelay));
+    
+    /* Only DDR2 includes Internal Read To Precharge Command Delay field.   */
+    pDimmInfo->minReadToPrechCmdDelay = data[DIMM_MIN_READ_TO_PRECH_CMD_DELAY];
+    DB(mvOsPrintf("DRAM minReadToPrechCmdDelay[38]  0x%x\n",    
+                                            pDimmInfo->minReadToPrechCmdDelay));
+    
+    /* Only DDR2 includes Minimum Refresh to Activate/Refresh Command field */
+    pDimmInfo->minRefreshToActiveCmd = data[DIMM_MIN_REFRESH_TO_ACTIVATE_CMD];
+    DB(mvOsPrintf("DRAM minRefreshToActiveCmd[42]   0x%x\n", 
+                                             pDimmInfo->minRefreshToActiveCmd));
+                 
+    /* calculating the sdram density. Representing device density from      */
+    /* bit 20 to allow representation of 4GB and above.                     */
+    /* For example, if density is 512Mbit 0x20000000, will be represent in  */
+    /* deviceDensity by 0x20000000 >> 16 --> 0x00000200. Another example    */
+    /* is density 8GB 0x200000000 >> 16 --> 0x00002000.                     */
+    density = (1 << ((pDimmInfo->numOfRowAddr + pDimmInfo->numOfColAddr) - 20));
+    pDimmInfo->deviceDensity = density * 
+                                pDimmInfo->numOfBanksOnEachDevice * 
+                                pDimmInfo->sdramWidth;
+    DB(mvOsPrintf("DRAM deviceDensity           %d\n",pDimmInfo->deviceDensity));
+    
+    /* Number of devices includeing Error correction */
+    pDimmInfo->numberOfDevices = (pDimmInfo->dataWidth/pDimmInfo->sdramWidth) * 
+                                  pDimmInfo->numOfModuleBanks;
+    DB(mvOsPrintf("DRAM numberOfDevices         %d\n",  
+                                                   pDimmInfo->numberOfDevices));
+
+    pDimmInfo->size = 0; 
+
+    /* Note that pDimmInfo->size is in MB units */
+    if (pDimmInfo->memoryType == MEM_TYPE_SDRAM)
+    {
+        if (pDimmInfo->dimmBankDensity & BIT0)
+            pDimmInfo->size += 1024;                /* Equal to 1GB     */
+        else if (pDimmInfo->dimmBankDensity & BIT1)
+            pDimmInfo->size += 8;                   /* Equal to 8MB     */
+        else if (pDimmInfo->dimmBankDensity & BIT2)
+            pDimmInfo->size += 16;                  /* Equal to 16MB    */
+        else if (pDimmInfo->dimmBankDensity & BIT3)
+            pDimmInfo->size += 32;                  /* Equal to 32MB    */
+        else if (pDimmInfo->dimmBankDensity & BIT4)
+            pDimmInfo->size += 64;                  /* Equal to 64MB    */
+        else if (pDimmInfo->dimmBankDensity & BIT5)
+            pDimmInfo->size += 128;                 /* Equal to 128MB   */
+        else if (pDimmInfo->dimmBankDensity & BIT6) 
+            pDimmInfo->size += 256;                 /* Equal to 256MB   */
+        else if (pDimmInfo->dimmBankDensity & BIT7) 
+            pDimmInfo->size += 512;                 /* Equal to 512MB   */
+    }
+    else if (pDimmInfo->memoryType == MEM_TYPE_DDR1)
+    {
+        if (pDimmInfo->dimmBankDensity & BIT0)
+            pDimmInfo->size += 1024;                /* Equal to 1GB     */
+        else if (pDimmInfo->dimmBankDensity & BIT1)
+            pDimmInfo->size += 2048;                /* Equal to 2GB     */
+        else if (pDimmInfo->dimmBankDensity & BIT2)
+            pDimmInfo->size += 16;                  /* Equal to 16MB    */
+        else if (pDimmInfo->dimmBankDensity & BIT3)
+            pDimmInfo->size += 32;                  /* Equal to 32MB    */
+        else if (pDimmInfo->dimmBankDensity & BIT4)
+            pDimmInfo->size += 64;                  /* Equal to 64MB    */
+        else if (pDimmInfo->dimmBankDensity & BIT5)
+            pDimmInfo->size += 128;                 /* Equal to 128MB   */
+        else if (pDimmInfo->dimmBankDensity & BIT6) 
+            pDimmInfo->size += 256;                 /* Equal to 256MB   */
+        else if (pDimmInfo->dimmBankDensity & BIT7) 
+            pDimmInfo->size += 512;                 /* Equal to 512MB   */
+    }
+    else /* if (dimmInfo.memoryType == MEM_TYPE_DDR2) */
+    {
+        if (pDimmInfo->dimmBankDensity & BIT0)
+            pDimmInfo->size += 1024;                /* Equal to 1GB     */
+        else if (pDimmInfo->dimmBankDensity & BIT1)
+            pDimmInfo->size += 2048;                /* Equal to 2GB     */
+        else if (pDimmInfo->dimmBankDensity & BIT2)
+            pDimmInfo->size += 4096;                /* Equal to 4GB     */
+        else if (pDimmInfo->dimmBankDensity & BIT3)
+            pDimmInfo->size += 8192;                /* Equal to 8GB     */
+        else if (pDimmInfo->dimmBankDensity & BIT4)
+            pDimmInfo->size += 16384;               /* Equal to 16GB    */
+        else if (pDimmInfo->dimmBankDensity & BIT5)
+            pDimmInfo->size += 128;                 /* Equal to 128MB   */
+        else if (pDimmInfo->dimmBankDensity & BIT6) 
+            pDimmInfo->size += 256;                 /* Equal to 256MB   */
+        else if (pDimmInfo->dimmBankDensity & BIT7) 
+            pDimmInfo->size += 512;                 /* Equal to 512MB   */
+    }
+    
+    pDimmInfo->size *= pDimmInfo->numOfModuleBanks;
+
+    DB(mvOsPrintf("Dram: dimm size    %dMB \n",pDimmInfo->size));
+
+    return MV_OK;
+}
+
+/*******************************************************************************
+* dimmSpdPrint - Print the SPD parameters.
+*
+* DESCRIPTION:
+*       Print the Dimm SPD parameters.
+*
+* INPUT:
+*       pDimmInfo - DIMM information structure.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+MV_VOID dimmSpdPrint(MV_U32 dimmNum)
+{
+    MV_DIMM_INFO dimmInfo;
+    MV_U32  i, temp = 0;
+    MV_U32  k, maskLeftOfPoint = 0, maskRightOfPoint = 0;
+    MV_U32  rightOfPoint = 0,leftOfPoint = 0, div, time_tmp, shift;
+    MV_U32  busClkPs;
+    MV_U8   trp_clocks=0, trcd_clocks, tras_clocks, trrd_clocks,
+            temp_buf[40], *spdRawData;
+
+    busClkPs = 1000000000 / (mvBoardSysClkGet() / 100);  /* in 10 ps units */
+
+    spdRawData = dimmInfo.spdRawData;
+    
+    if(MV_OK != dimmSpdGet(dimmNum, &dimmInfo))
+    {
+        mvOsOutput("ERROR: Could not read SPD information!\n");
+        return;
+    }
+
+    /* find Manufactura of Dimm Module */
+    mvOsOutput("\nManufacturer's JEDEC ID Code:   ");
+    for(i = 0 ; i < DIMM_MODULE_MANU_SIZE ; i++)
+    {
+        mvOsOutput("%x",spdRawData[DIMM_MODULE_MANU_OFFS + i]);
+    }
+    mvOsOutput("\n");
+
+    /* Manufacturer's Specific Data */
+    for(i = 0 ; i < DIMM_MODULE_ID_SIZE ; i++)
+    {
+        temp_buf[i] = spdRawData[DIMM_MODULE_ID_OFFS + i];
+    }
+    mvOsOutput("Manufacturer's Specific Data:   %s\n", temp_buf);
+
+    /* Module Part Number */
+    for(i = 0 ; i < DIMM_MODULE_VEN_SIZE ; i++)
+    {
+        temp_buf[i] = spdRawData[DIMM_MODULE_VEN_OFFS + i];
+    }
+    mvOsOutput("Module Part Number:             %s\n", temp_buf);
+
+    /* Module Serial Number */
+    for(i = 0; i < sizeof(MV_U32); i++)
+    {
+    	temp |= spdRawData[95+i] << 8*i;
+    }
+    mvOsOutput("DIMM Serial No.                 %ld (%lx)\n", (long)temp, 
+                                    (long)temp);
+
+    /* find Manufac-Data of Dimm Module */
+    mvOsOutput("Manufactoring Date:             Year 20%d%d/ ww %d%d\n", 
+                        ((spdRawData[93] & 0xf0) >> 4), (spdRawData[93] & 0xf), 
+                        ((spdRawData[94] & 0xf0) >> 4), (spdRawData[94] & 0xf)); 
+    /* find modul_revision of Dimm Module */
+    mvOsOutput("Module Revision:                %d.%d\n", 
+               spdRawData[62]/10, spdRawData[62]%10); 
+
+    /* find manufac_place of Dimm Module */
+    mvOsOutput("manufac_place:                  %d\n", spdRawData[72]);
+    
+    /* go over the first 35 I2C data bytes */
+    for(i = 2 ; i <= 35 ; i++)
+       switch(i)
+        {
+            case 2:  /* Memory type (DDR1/2 / SDRAM) */
+                if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+                    mvOsOutput("Dram Type is:                   SDRAM\n");
+                else if (dimmInfo.memoryType == MEM_TYPE_DDR1)
+                    mvOsOutput("Dram Type is:                   SDRAM DDR1\n");
+                else if (dimmInfo.memoryType == MEM_TYPE_DDR2)
+                    mvOsOutput("Dram Type is:                   SDRAM DDR2\n");
+                else
+                    mvOsOutput("Dram Type unknown\n");
+                break;
+/*----------------------------------------------------------------------------*/
+
+            case 3:  /* Number Of Row Addresses */
+                mvOsOutput("Module Number of row addresses: %d\n", 
+                                                        dimmInfo.numOfRowAddr);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 4:  /* Number Of Column Addresses */
+                mvOsOutput("Module Number of col addresses: %d\n", 
+                                                        dimmInfo.numOfColAddr);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 5:  /* Number Of Module Banks */
+                mvOsOutput("Number of Banks on Mod.:        %d\n",  
+                                                    dimmInfo.numOfModuleBanks);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 6:  /* Data Width */
+                mvOsOutput("Module Data Width:              %d bit\n",  
+                                                           dimmInfo.dataWidth);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 8:  /* Voltage Interface */
+                switch(spdRawData[i])
+                {
+                    case 0x0:
+                        mvOsOutput("Module is               TTL_5V_TOLERANT\n");
+                        break;
+                    case 0x1:
+                        mvOsOutput("Module is               LVTTL\n");
+                        break;
+                    case 0x2:
+                        mvOsOutput("Module is               HSTL_1_5V\n");
+                        break;
+                    case 0x3:
+                        mvOsOutput("Module is               SSTL_3_3V\n");
+                        break;
+                    case 0x4:
+                        mvOsOutput("Module is               SSTL_2_5V\n");
+                        break;
+                    case 0x5:
+                        if (dimmInfo.memoryType != MEM_TYPE_SDRAM)
+                        {
+                            mvOsOutput("Module is                 SSTL_1_8V\n");
+                            break;
+                        }
+                    default:
+                        mvOsOutput("Module is               VOLTAGE_UNKNOWN\n");
+                        break;
+                }
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 9:  /* Minimum Cycle Time At Max CasLatancy */
+                leftOfPoint = (spdRawData[i] & 0xf0) >> 4;
+                rightOfPoint = (spdRawData[i] & 0x0f) * 10;
+                
+                /* DDR2 addition of right of point */
+                if ((spdRawData[i] & 0x0f) == 0xA)
+                {
+                    rightOfPoint = 25;
+                }
+                if ((spdRawData[i] & 0x0f) == 0xB)
+                {
+                    rightOfPoint = 33;
+                }
+                if ((spdRawData[i] & 0x0f) == 0xC)
+                {
+                    rightOfPoint = 66;
+                }
+                if ((spdRawData[i] & 0x0f) == 0xD)
+                {
+                    rightOfPoint = 75;
+                }
+                mvOsOutput("Minimum Cycle Time At Max CL:   %d.%d [ns]\n",
+                                                    leftOfPoint, rightOfPoint);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 10: /* Clock To Data Out */
+                div = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 10:100;
+                time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + 
+                                                      ((spdRawData[i] & 0x0f));
+                leftOfPoint     = time_tmp / div;
+                rightOfPoint    = time_tmp % div;
+                mvOsOutput("Clock To Data Out:              %d.%d [ns]\n",
+                                                    leftOfPoint, rightOfPoint);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 11: /* Error Check Type */
+                mvOsOutput("Error Check Type (0=NONE):      %d\n", 
+                                                      dimmInfo.errorCheckType);
+                break;
+/*----------------------------------------------------------------------------*/
+
+            case 12: /* Refresh Interval */
+                mvOsOutput("Refresh Rate:                   %x\n", 
+                                                     dimmInfo.refreshInterval);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 13: /* Sdram Width */
+                mvOsOutput("Sdram Width:                    %d bits\n",     
+                                                          dimmInfo.sdramWidth);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 14: /* Error Check Data Width */
+                mvOsOutput("Error Check Data Width:         %d bits\n", 
+                                                 dimmInfo.errorCheckDataWidth);
+                break;
+/*----------------------------------------------------------------------------*/
+
+           case 15: /* Minimum Clock Delay is unsupported */
+                if ((dimmInfo.memoryType == MEM_TYPE_SDRAM) ||
+                    (dimmInfo.memoryType == MEM_TYPE_DDR1))
+                {
+                    mvOsOutput("Minimum Clk Delay back to back: %d\n", 
+                                                                spdRawData[i]);
+                }
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 16: /* Burst Length Supported */
+    /*     SDRAM/DDR1:
+                    *******-******-******-******-******-******-******-******* 
+                    * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * 
+                    *******-******-******-******-******-******-******-******* 
+    burst length =  * Page | TBD  | TBD  | TBD  |  8   |  4   |  2   |   1  * 
+                    *********************************************************/ 
+    /*     DDR2:
+                    *******-******-******-******-******-******-******-******* 
+                    * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * 
+                    *******-******-******-******-******-******-******-******* 
+    burst length =  * Page | TBD  | TBD  | TBD  |  8   |  4   | TBD  | TBD  * 
+                    *********************************************************/ 
+                mvOsOutput("Burst Length Supported: ");
+                if ((dimmInfo.memoryType == MEM_TYPE_SDRAM) ||
+                    (dimmInfo.memoryType == MEM_TYPE_DDR1))
+                {
+                    if (dimmInfo.burstLengthSupported & BIT0)
+                        mvOsOutput("1, ");
+                    if (dimmInfo.burstLengthSupported & BIT1)
+                        mvOsOutput("2, ");
+                }
+                if (dimmInfo.burstLengthSupported & BIT2)
+                    mvOsOutput("4, ");
+                if (dimmInfo.burstLengthSupported & BIT3) 
+                    mvOsOutput("8, ");
+                
+                mvOsOutput(" Bit \n");
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 17: /* Number Of Banks On Each Device */
+                mvOsOutput("Number Of Banks On Each Chip:   %d\n",  
+                                              dimmInfo.numOfBanksOnEachDevice);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 18: /* Suported Cas Latencies */
+                   
+            /*      SDRAM:
+                    *******-******-******-******-******-******-******-******* 
+                    * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * 
+                    *******-******-******-******-******-******-******-******* 
+            CAS =   * TBD  |  7   |  6   |  5   |  4   |  3   |   2  |   1  * 
+                    ********************************************************/ 
+
+            /*     DDR 1:
+                    *******-******-******-******-******-******-******-******* 
+                    * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * 
+                    *******-******-******-******-******-******-******-******* 
+            CAS =   * TBD  |  4   | 3.5  |   3  | 2.5  |  2   | 1.5  |   1  * 
+                    *********************************************************/
+
+            /*     DDR 2:
+                    *******-******-******-******-******-******-******-******* 
+                    * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * 
+                    *******-******-******-******-******-******-******-******* 
+            CAS =   * TBD  | TBD  |  5   |  4   |  3   |  2   | TBD  | TBD  * 
+                    *********************************************************/
+
+                mvOsOutput("Suported Cas Latencies: (CL) 			");
+                if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+                {
+                    for (k = 0; k <=7; k++)
+                    {
+                        if (dimmInfo.suportedCasLatencies & (1 << k))
+                            mvOsOutput("%d,             ", k+1);
+                    }
+                }
+                else if (dimmInfo.memoryType == MEM_TYPE_DDR1)
+                {
+                    if (dimmInfo.suportedCasLatencies & BIT0)
+                        mvOsOutput("1, ");
+                    if (dimmInfo.suportedCasLatencies & BIT1)
+                        mvOsOutput("1.5, ");
+                    if (dimmInfo.suportedCasLatencies & BIT2)
+                        mvOsOutput("2, ");
+                    if (dimmInfo.suportedCasLatencies & BIT3)
+                        mvOsOutput("2.5, ");
+                    if (dimmInfo.suportedCasLatencies & BIT4)
+                        mvOsOutput("3, ");
+                    if (dimmInfo.suportedCasLatencies & BIT5)
+                        mvOsOutput("3.5, ");
+                }
+                else if (dimmInfo.memoryType == MEM_TYPE_DDR2)
+                {
+                    if (dimmInfo.suportedCasLatencies & BIT2)
+                        mvOsOutput("2, ");
+                    if (dimmInfo.suportedCasLatencies & BIT3)
+                        mvOsOutput("3, ");
+                    if (dimmInfo.suportedCasLatencies & BIT4)
+                        mvOsOutput("4, ");
+                    if (dimmInfo.suportedCasLatencies & BIT5)
+                        mvOsOutput("5, ");		
+                }
+                else
+                    mvOsOutput("?.?, ");		
+                mvOsOutput("\n");
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 20:   /* DDR2 DIMM type info */
+                if (dimmInfo.memoryType == MEM_TYPE_DDR2)
+                {
+                    if (dimmInfo.dimmTypeInfo & (BIT0 | BIT4))
+                        mvOsOutput("Registered DIMM (RDIMM)\n");
+                    else if (dimmInfo.dimmTypeInfo & (BIT1 | BIT5))
+                        mvOsOutput("Unbuffered DIMM (UDIMM)\n");
+                    else 
+                        mvOsOutput("Unknown DIMM type.\n");
+                }
+
+                break;
+/*----------------------------------------------------------------------------*/
+   
+            case 21: /* SDRAM Modules Attributes */
+                mvOsOutput("\nModule Attributes (SPD Byte 21): \n");
+                
+                if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+                {
+                    if (dimmInfo.dimmAttributes & BIT0)
+                        mvOsOutput(" Buffered Addr/Control Input:   Yes\n");
+                    else
+                        mvOsOutput(" Buffered Addr/Control Input:   No\n");
+
+                    if (dimmInfo.dimmAttributes & BIT1)
+                        mvOsOutput(" Registered Addr/Control Input: Yes\n");
+                    else
+                        mvOsOutput(" Registered Addr/Control Input: No\n");
+   
+                    if (dimmInfo.dimmAttributes & BIT2)
+                        mvOsOutput(" On-Card PLL (clock):           Yes \n");
+                    else
+                        mvOsOutput(" On-Card PLL (clock):           No \n");
+
+                    if (dimmInfo.dimmAttributes & BIT3)
+                        mvOsOutput(" Bufferd DQMB Input:            Yes \n");
+                    else
+                        mvOsOutput(" Bufferd DQMB Inputs:           No \n");
+   
+                    if (dimmInfo.dimmAttributes & BIT4)
+                        mvOsOutput(" Registered DQMB Inputs:        Yes \n");
+                    else
+                        mvOsOutput(" Registered DQMB Inputs:        No \n");
+ 
+                    if (dimmInfo.dimmAttributes & BIT5)
+                        mvOsOutput(" Differential Clock Input:      Yes \n");
+                    else
+                        mvOsOutput(" Differential Clock Input:      No \n");
+   
+                    if (dimmInfo.dimmAttributes & BIT6)
+                        mvOsOutput(" redundant Row Addressing:      Yes \n");
+                    else
+                        mvOsOutput(" redundant Row Addressing:      No \n");
+                }
+                else if (dimmInfo.memoryType == MEM_TYPE_DDR1)
+                {
+                    if (dimmInfo.dimmAttributes & BIT0)
+                        mvOsOutput(" Buffered Addr/Control Input:   Yes\n");
+                    else 
+                        mvOsOutput(" Buffered Addr/Control Input:   No\n");
+   
+                    if (dimmInfo.dimmAttributes & BIT1)
+                        mvOsOutput(" Registered Addr/Control Input: Yes\n");
+                    else
+                        mvOsOutput(" Registered Addr/Control Input: No\n");
+   
+                    if (dimmInfo.dimmAttributes & BIT2)
+                        mvOsOutput(" On-Card PLL (clock):           Yes \n");
+                    else
+                        mvOsOutput(" On-Card PLL (clock):           No \n");
+            
+                    if (dimmInfo.dimmAttributes & BIT3)
+                        mvOsOutput(" FET Switch On-Card Enabled:    Yes \n");
+                    else
+                        mvOsOutput(" FET Switch On-Card Enabled:    No \n");
+                    
+                    if (dimmInfo.dimmAttributes & BIT4)
+                        mvOsOutput(" FET Switch External Enabled:   Yes \n");
+                    else
+                        mvOsOutput(" FET Switch External Enabled:   No \n");
+
+                    if (dimmInfo.dimmAttributes & BIT5)
+                        mvOsOutput(" Differential Clock Input:      Yes \n");
+                    else
+                        mvOsOutput(" Differential Clock Input:      No \n");
+                }
+                else /* if (dimmInfo.memoryType == MEM_TYPE_DDR2) */
+                {
+                    mvOsOutput(" Number of Active Registers on the DIMM: %d\n", 
+                                        (dimmInfo.dimmAttributes & 0x3) + 1);
+            
+                    mvOsOutput(" Number of PLLs on the DIMM: %d\n", 
+                                      ((dimmInfo.dimmAttributes) >> 2) & 0x3);
+               
+                    if (dimmInfo.dimmAttributes & BIT4)
+                        mvOsOutput(" FET Switch External Enabled:   Yes \n");
+                    else
+                        mvOsOutput(" FET Switch External Enabled:   No \n");
+
+                    if (dimmInfo.dimmAttributes & BIT6)
+                        mvOsOutput(" Analysis probe installed:      Yes \n");
+                    else
+                        mvOsOutput(" Analysis probe installed:      No \n");
+                }
+                
+                break;
+/*----------------------------------------------------------------------------*/
+
+            case 22: /* Suported AutoPreCharge */
+                mvOsOutput("\nModul Attributes (SPD Byte 22): \n");
+                if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+                {
+                    if ( spdRawData[i] & BIT0 )
+                        mvOsOutput(" Early Ras Precharge:           Yes \n");
+                    else
+                        mvOsOutput(" Early Ras Precharge:           No \n");
+                                                        
+                    if ( spdRawData[i] & BIT1 )                 
+                        mvOsOutput(" AutoPreCharge:                 Yes \n");
+                    else
+                        mvOsOutput(" AutoPreCharge:                 No \n");
+                                                            
+                    if ( spdRawData[i] & BIT2 )                 
+                        mvOsOutput(" Precharge All:                 Yes \n");
+                    else
+                        mvOsOutput(" Precharge All:                 No \n");
+                                                        
+                    if ( spdRawData[i] & BIT3 )                 
+                        mvOsOutput(" Write 1/ReadBurst:             Yes \n");
+                    else
+                        mvOsOutput(" Write 1/ReadBurst:             No \n");
+                                                        
+                    if ( spdRawData[i] & BIT4 )                 
+                        mvOsOutput(" lower VCC tolerance:           5%%\n");
+                    else
+                        mvOsOutput(" lower VCC tolerance:           10%%\n");
+                                                        
+                    if ( spdRawData[i] & BIT5 )                 
+                        mvOsOutput(" upper VCC tolerance:           5%%\n");
+                    else
+                        mvOsOutput(" upper VCC tolerance:           10%%\n");
+                }
+                else if (dimmInfo.memoryType == MEM_TYPE_DDR1)
+                {
+                    if ( spdRawData[i] & BIT0 )
+                        mvOsOutput(" Supports Weak Driver:          Yes \n");
+                    else
+                        mvOsOutput(" Supports Weak Driver:          No \n");
+
+                    if ( !(spdRawData[i] & BIT4) )
+                        mvOsOutput(" lower VCC tolerance:           0.2V\n");
+   
+                    if ( !(spdRawData[i] & BIT5) )
+                        mvOsOutput(" upper VCC tolerance:           0.2V\n");
+
+                    if ( spdRawData[i] & BIT6 )
+                        mvOsOutput(" Concurrent Auto Preharge:      Yes \n");
+                    else
+                        mvOsOutput(" Concurrent Auto Preharge:      No \n");
+
+                    if ( spdRawData[i] & BIT7 )
+                        mvOsOutput(" Supports Fast AP:              Yes \n");
+                    else
+                        mvOsOutput(" Supports Fast AP:              No \n");
+                }
+                else if (dimmInfo.memoryType == MEM_TYPE_DDR2)
+                {
+                    if ( spdRawData[i] & BIT0 )
+                        mvOsOutput(" Supports Weak Driver:          Yes \n");
+                    else
+                        mvOsOutput(" Supports Weak Driver:          No \n");
+                }
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 23:
+            /* Minimum Cycle Time At Maximum Cas Latancy Minus 1 (2nd highest CL) */
+                leftOfPoint = (spdRawData[i] & 0xf0) >> 4;
+                rightOfPoint = (spdRawData[i] & 0x0f) * 10;
+                
+                /* DDR2 addition of right of point */
+                if ((spdRawData[i] & 0x0f) == 0xA)
+                {
+                    rightOfPoint = 25;
+                }
+                if ((spdRawData[i] & 0x0f) == 0xB)
+                {
+                    rightOfPoint = 33;
+                }
+                if ((spdRawData[i] & 0x0f) == 0xC)
+                {
+                    rightOfPoint = 66;
+                }
+                if ((spdRawData[i] & 0x0f) == 0xD)
+                {
+                    rightOfPoint = 75;
+                }
+
+                mvOsOutput("Minimum Cycle Time At 2nd highest CasLatancy"
+                           "(0 = Not supported): %d.%d [ns]\n",
+                           leftOfPoint, rightOfPoint );
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 24: /* Clock To Data Out 2nd highest Cas Latency Value*/
+                div = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? 10:100;
+                time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + 
+                                                    ((spdRawData[i] & 0x0f));
+                leftOfPoint     = time_tmp / div;
+                rightOfPoint    = time_tmp % div;
+                mvOsOutput("Clock To Data Out (2nd CL value): 		%d.%d [ns]\n",
+                                                    leftOfPoint, rightOfPoint);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 25: 
+            /* Minimum Cycle Time At Maximum Cas Latancy Minus 2 (3rd highest CL) */
+                if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+                {
+                    leftOfPoint = (spdRawData[i] & 0xfc) >> 2;
+                    rightOfPoint = (spdRawData[i] & 0x3) * 25;
+                }
+                else    /* DDR1 or DDR2 */ 
+                {
+                    leftOfPoint = (spdRawData[i] & 0xf0) >> 4;
+                    rightOfPoint = (spdRawData[i] & 0x0f) * 10;
+                    
+                    /* DDR2 addition of right of point */
+                    if ((spdRawData[i] & 0x0f) == 0xA)
+                    {
+                        rightOfPoint = 25;
+                    }
+                    if ((spdRawData[i] & 0x0f) == 0xB)
+                    {
+                        rightOfPoint = 33;
+                    }
+                    if ((spdRawData[i] & 0x0f) == 0xC)
+                    {
+                        rightOfPoint = 66;
+                    }
+                    if ((spdRawData[i] & 0x0f) == 0xD)
+                    {
+                        rightOfPoint = 75;
+                    }
+                }
+                mvOsOutput("Minimum Cycle Time At 3rd highest CasLatancy" 
+                           "(0 = Not supported): %d.%d [ns]\n",
+                           leftOfPoint, rightOfPoint );
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 26: /* Clock To Data Out 3rd highest Cas Latency Value*/
+                if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+                {
+                    leftOfPoint = (spdRawData[i] & 0xfc) >> 2;
+                    rightOfPoint = (spdRawData[i] & 0x3) * 25;
+                }
+                else    /* DDR1 or DDR2 */ 
+                {
+                    time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + 
+                                                      ((spdRawData[i] & 0x0f));
+                    leftOfPoint     = 0;
+                    rightOfPoint    = time_tmp;
+                }
+                mvOsOutput("Clock To Data Out (3rd CL value): 		%d.%2d[ns]\n",
+                                                  leftOfPoint, rightOfPoint );
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 27: /* Minimum Row Precharge Time */
+                shift = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 0:2;
+                maskLeftOfPoint  = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? 
+                                                                    0xff : 0xfc;
+                maskRightOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? 
+                                                                    0x00 : 0x03;
+                leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> shift);
+                rightOfPoint = (spdRawData[i] & maskRightOfPoint)*25;
+                temp = ((leftOfPoint*100) + rightOfPoint);/* in 10ps Intervals*/
+                trp_clocks = (temp + (busClkPs-1)) /  busClkPs;    
+                mvOsOutput("Minimum Row Precharge Time [ns]: 		%d.%d = " 
+                           "in Clk cycles %d\n", 
+                           leftOfPoint, rightOfPoint, trp_clocks);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 28: /* Minimum Row Active to Row Active Time */
+                shift = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 0:2;
+                maskLeftOfPoint  = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? 
+                                                                    0xff : 0xfc;
+                maskRightOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? 
+                                                                    0x00 : 0x03;
+                leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> shift);
+                rightOfPoint = (spdRawData[i] & maskRightOfPoint)*25;
+                temp = ((leftOfPoint*100) + rightOfPoint);/* in 100ns Interval*/
+                trrd_clocks = (temp + (busClkPs-1)) / busClkPs;
+                mvOsOutput("Minimum Row Active -To- Row Active Delay [ns]: " 
+                           "%d.%d = in Clk cycles %d\n",
+                            leftOfPoint, rightOfPoint, trp_clocks);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 29: /* Minimum Ras-To-Cas Delay */
+                shift = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 0:2;
+                maskLeftOfPoint  = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? 
+                                                                    0xff : 0xfc;
+                maskRightOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? 
+                                                                    0x00 : 0x03;
+                leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> shift);
+                rightOfPoint = (spdRawData[i] & maskRightOfPoint)*25;  
+                temp = ((leftOfPoint*100) + rightOfPoint);/* in 100ns Interval*/
+                trcd_clocks = (temp + (busClkPs-1) )/ busClkPs;
+                mvOsOutput("Minimum Ras-To-Cas Delay [ns]: 			%d.%d = "
+                           "in Clk cycles %d\n", 
+                           leftOfPoint, rightOfPoint, trp_clocks);
+                break;
+/*----------------------------------------------------------------------------*/
+   
+            case 30: /* Minimum Ras Pulse Width */
+                tras_clocks = (cas2ps(spdRawData[i])+(busClkPs-1)) / busClkPs;
+                mvOsOutput("Minimum Ras Pulse Width [ns]: 			%d = "
+                           "in Clk cycles %d\n", spdRawData[i], tras_clocks);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 31: /* Module Bank Density */
+                mvOsOutput("Module Bank Density (more than 1= Multisize-Module):");
+
+                if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+                {
+                    if (dimmInfo.dimmBankDensity & BIT0)
+                        mvOsOutput("1GB, ");
+                    if (dimmInfo.dimmBankDensity & BIT1)
+                        mvOsOutput("8MB, ");
+                    if (dimmInfo.dimmBankDensity & BIT2)
+                        mvOsOutput("16MB, ");
+                    if (dimmInfo.dimmBankDensity & BIT3)
+                        mvOsOutput("32MB, ");
+                    if (dimmInfo.dimmBankDensity & BIT4)
+                        mvOsOutput("64MB, ");
+                    if (dimmInfo.dimmBankDensity & BIT5)
+                        mvOsOutput("128MB, ");
+                    if (dimmInfo.dimmBankDensity & BIT6) 
+                        mvOsOutput("256MB, ");
+                    if (dimmInfo.dimmBankDensity & BIT7) 
+                        mvOsOutput("512MB, ");
+                }
+                else if (dimmInfo.memoryType == MEM_TYPE_DDR1)
+                {
+                    if (dimmInfo.dimmBankDensity & BIT0)
+                        mvOsOutput("1GB, ");
+                    if (dimmInfo.dimmBankDensity & BIT1)
+                        mvOsOutput("2GB, ");
+                    if (dimmInfo.dimmBankDensity & BIT2)
+                        mvOsOutput("16MB, ");
+                    if (dimmInfo.dimmBankDensity & BIT3)
+                        mvOsOutput("32MB, ");
+                    if (dimmInfo.dimmBankDensity & BIT4)
+                        mvOsOutput("64MB, ");
+                    if (dimmInfo.dimmBankDensity & BIT5)
+                        mvOsOutput("128MB, ");
+                    if (dimmInfo.dimmBankDensity & BIT6) 
+                        mvOsOutput("256MB, ");
+                    if (dimmInfo.dimmBankDensity & BIT7) 
+                        mvOsOutput("512MB, ");
+                }
+                else /* if (dimmInfo.memoryType == MEM_TYPE_DDR2) */
+                {
+                    if (dimmInfo.dimmBankDensity & BIT0)
+                        mvOsOutput("1GB, ");
+                    if (dimmInfo.dimmBankDensity & BIT1)
+                        mvOsOutput("2GB, ");
+                    if (dimmInfo.dimmBankDensity & BIT2)
+                        mvOsOutput("4GB, ");
+                    if (dimmInfo.dimmBankDensity & BIT3)
+                        mvOsOutput("8GB, ");
+                    if (dimmInfo.dimmBankDensity & BIT4)
+                        mvOsOutput("16GB, ");
+                    if (dimmInfo.dimmBankDensity & BIT5)
+                    mvOsOutput("128MB, ");
+                        if (dimmInfo.dimmBankDensity & BIT6) 
+                    mvOsOutput("256MB, ");
+                        if (dimmInfo.dimmBankDensity & BIT7) 
+                    mvOsOutput("512MB, ");
+                }
+                mvOsOutput("\n");
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 32: /* Address And Command Setup Time (measured in ns/1000) */
+                if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+                {
+                    rightOfPoint = (spdRawData[i] & 0x0f);
+                    leftOfPoint  = (spdRawData[i] & 0xf0) >> 4;
+                    if(leftOfPoint > 7)
+                    {
+                    leftOfPoint *= -1;
+                    }
+                }
+                else /* DDR1 or DDR2 */
+                {
+                    time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + 
+                                                      ((spdRawData[i] & 0x0f));
+                    leftOfPoint = time_tmp / 100;
+                    rightOfPoint = time_tmp % 100; 
+                }
+                mvOsOutput("Address And Command Setup Time [ns]: 		%d.%d\n",
+                                                     leftOfPoint, rightOfPoint);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 33: /* Address And Command Hold Time */
+                if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+                {
+                    rightOfPoint = (spdRawData[i] & 0x0f);
+                    leftOfPoint  = (spdRawData[i] & 0xf0) >> 4;
+                    if(leftOfPoint > 7)
+                    {
+                    leftOfPoint *= -1;
+                    }
+                }
+                else /* DDR1 or DDR2 */
+                {
+                    time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + 
+                                                      ((spdRawData[i] & 0x0f));
+                    leftOfPoint = time_tmp / 100;
+                    rightOfPoint = time_tmp % 100;                 
+                }
+                mvOsOutput("Address And Command Hold Time [ns]: 		%d.%d\n",
+                                                   leftOfPoint, rightOfPoint);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 34: /* Data Input Setup Time */
+                if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+                {
+                    rightOfPoint = (spdRawData[i] & 0x0f);
+                    leftOfPoint  = (spdRawData[i] & 0xf0) >> 4;
+                    if(leftOfPoint > 7)
+                    {
+                        leftOfPoint *= -1;
+                    }
+                }
+                else /* DDR1 or DDR2 */
+                {
+                    time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + 
+                                                      ((spdRawData[i] & 0x0f));
+                    leftOfPoint = time_tmp / 100;
+                    rightOfPoint = time_tmp % 100;                 
+                }
+                mvOsOutput("Data Input Setup Time [ns]: 			%d.%d\n", 
+                                                    leftOfPoint, rightOfPoint);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 35: /* Data Input Hold Time */
+                if (dimmInfo.memoryType == MEM_TYPE_SDRAM)
+                {
+                    rightOfPoint = (spdRawData[i] & 0x0f);
+                    leftOfPoint  = (spdRawData[i] & 0xf0) >> 4;
+                    if(leftOfPoint > 7)
+                    {
+                        leftOfPoint *= -1;
+                    }
+                }
+                else /* DDR1 or DDR2 */
+                {
+                    time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + 
+                                                      ((spdRawData[i] & 0x0f));
+                    leftOfPoint = time_tmp / 100;
+                    rightOfPoint = time_tmp % 100;                 
+                }
+                mvOsOutput("Data Input Hold Time [ns]: 			%d.%d\n\n", 
+                                                    leftOfPoint, rightOfPoint);
+                break;
+/*----------------------------------------------------------------------------*/
+    
+            case 36: /* Relevant for DDR2 only: Write Recovery Time */
+                leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> 2);
+                rightOfPoint = (spdRawData[i] & maskRightOfPoint) * 25;  
+                mvOsOutput("Write Recovery Time [ns]: 			%d.%d\n", 
+                                                    leftOfPoint, rightOfPoint);
+                break;
+/*----------------------------------------------------------------------------*/
+        }
+    
+}
+
+
+/*
+ * translate ns.ns/10 coding of SPD timing values
+ * into ps unit values
+ */
+/*******************************************************************************
+*  cas2ps - Translate x.y ns parameter to pico-seconds values
+*
+* DESCRIPTION:
+*       This function translates x.y nano seconds to its value in pico seconds.
+*       For example 3.75ns will return 3750.
+*
+* INPUT:
+*       spd_byte - DIMM SPD byte.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       value in pico seconds.
+*
+*******************************************************************************/
+static MV_U32  cas2ps(MV_U8 spd_byte)
+{
+    MV_U32 ns, ns10;
+    
+    /* isolate upper nibble */
+    ns = (spd_byte >> 4) & 0x0F;
+    /* isolate lower nibble */
+    ns10 = (spd_byte & 0x0F);
+    
+    if( ns10 < 10 ) {
+        ns10 *= 10;
+    }
+    else if( ns10 == 10 )
+        ns10 = 25;
+    else if( ns10 == 11 )
+        ns10 = 33;
+    else if( ns10 == 12 )
+        ns10 = 66;
+    else if( ns10 == 13 )
+        ns10 = 75;
+    else 
+    {
+        mvOsOutput("cas2ps Err. unsupported cycle time.\n");
+    }
+    
+    return (ns*1000 + ns10*10);
+}
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/spd/mvSpd.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/spd/mvSpd.h
new file mode 100644
index 0000000000..f95546624c
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/spd/mvSpd.h
@@ -0,0 +1,192 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvDram
+#define __INCmvDram
+
+#include "ddr2/mvDramIf.h"
+#include "twsi/mvTwsi.h"
+
+#define MAX_DIMM_NUM 			2
+#define SPD_SIZE			128
+
+/* Dimm spd offsets */
+#define DIMM_MEM_TYPE 					2
+#define DIMM_ROW_NUM 					3
+#define DIMM_COL_NUM 					4
+#define DIMM_MODULE_BANK_NUM 				5
+#define DIMM_DATA_WIDTH 				6
+#define DIMM_VOLT_IF 					8
+#define DIMM_MIN_CC_AT_MAX_CAS 				9
+#define DIMM_ERR_CHECK_TYPE 				11
+#define DIMM_REFRESH_INTERVAL 				12
+#define DIMM_SDRAM_WIDTH 				13
+#define DIMM_ERR_CHECK_DATA_WIDTH 			14
+#define DIMM_MIN_CLK_DEL 				15
+#define DIMM_BURST_LEN_SUP 				16
+#define DIMM_DEV_BANK_NUM 				17
+#define DIMM_SUP_CAL 					18
+#define DIMM_DDR2_TYPE_INFORMATION          		20      /* DDR2 only */
+#define DIMM_BUF_ADDR_CONT_IN 				21
+#define DIMM_MIN_CC_AT_MAX_CAS_MINUS1			23
+#define DIMM_MIN_CC_AT_MAX_CAS_MINUS2			25
+#define DIMM_MIN_ROW_PRECHARGE_TIME			27
+#define DIMM_MIN_ROW_ACTIVE_TO_ROW_ACTIVE		28
+#define DIMM_MIN_RAS_TO_CAS_DELAY			29
+#define DIMM_MIN_RAS_PULSE_WIDTH			30
+#define DIMM_BANK_DENSITY				31
+#define DIMM_MIN_WRITE_RECOVERY_TIME        		36
+#define DIMM_MIN_WRITE_TO_READ_CMD_DELAY    		37
+#define DIMM_MIN_READ_TO_PRECH_CMD_DELAY    		38
+#define DIMM_MIN_REFRESH_TO_ACTIVATE_CMD    		42
+#define DIMM_SPD_VERSION    				62
+
+/* Dimm Memory Type values */
+#define DIMM_MEM_TYPE_SDRAM					0x4
+#define DIMM_MEM_TYPE_DDR1 					0x7
+#define DIMM_MEM_TYPE_DDR2 					0x8
+        
+#define DIMM_MODULE_MANU_OFFS 		64
+#define DIMM_MODULE_MANU_SIZE 		8
+#define DIMM_MODULE_VEN_OFFS 		73 
+#define DIMM_MODULE_VEN_SIZE 		25
+#define DIMM_MODULE_ID_OFFS 		99
+#define DIMM_MODULE_ID_SIZE 		18
+
+/* enumeration for voltage levels. */
+typedef enum _mvDimmVoltageIf
+{
+    TTL_5V_TOLERANT, 
+    LVTTL, 
+    HSTL_1_5V, 
+    SSTL_3_3V, 
+    SSTL_2_5V, 
+    VOLTAGE_UNKNOWN, 
+} MV_DIMM_VOLTAGE_IF;
+
+
+/* enumaration for SDRAM CAS Latencies. */
+typedef enum _mvDimmSdramCas
+{
+    SD_CL_1 =1,  
+    SD_CL_2,  
+    SD_CL_3, 
+    SD_CL_4, 
+    SD_CL_5, 
+    SD_CL_6, 
+    SD_CL_7, 
+    SD_FAULT
+}MV_DIMM_SDRAM_CAS;
+
+
+/* DIMM information structure */                                                    
+typedef struct _mvDimmInfo
+{
+    MV_MEMORY_TYPE  memoryType; 	/* DDR or SDRAM */
+
+    MV_U8       spdRawData[SPD_SIZE];  	/* Content of SPD-EEPROM copied 1:1  */
+
+    /* DIMM dimensions */
+    MV_U32  numOfRowAddr;
+    MV_U32  numOfColAddr;
+    MV_U32  numOfModuleBanks;
+    MV_U32  dataWidth;
+    MV_U32  errorCheckType;             /* ECC , PARITY..*/
+    MV_U32  sdramWidth;                 /* 4,8,16 or 32 */
+    MV_U32  errorCheckDataWidth;        /* 0 - no, 1 - Yes */
+    MV_U32  burstLengthSupported;
+    MV_U32  numOfBanksOnEachDevice;
+    MV_U32  suportedCasLatencies;
+    MV_U32  refreshInterval;
+    MV_U32  dimmBankDensity;
+    MV_U32  dimmTypeInfo;           /* DDR2 only */
+    MV_U32  dimmAttributes;
+
+    /* DIMM timing parameters */
+    MV_U32  minCycleTimeAtMaxCasLatPs;	
+    MV_U32  minCycleTimeAtMaxCasLatMinus1Ps;
+    MV_U32  minCycleTimeAtMaxCasLatMinus2Ps;
+	MV_U32  minRowPrechargeTime;
+	MV_U32  minRowActiveToRowActive;
+	MV_U32  minRasToCasDelay;
+	MV_U32  minRasPulseWidth;
+    MV_U32  minWriteRecoveryTime;   /* DDR2 only */
+    MV_U32  minWriteToReadCmdDelay; /* DDR2 only */
+    MV_U32  minReadToPrechCmdDelay; /* DDR2 only */
+    MV_U32  minRefreshToActiveCmd;  /* DDR2 only */
+
+    /* Parameters calculated from the extracted DIMM information */
+    MV_U32  size;               /* 16,64,128,256 or 512 MByte in MB units */
+    MV_U32  deviceDensity;      /* 16,64,128,256 or 512 Mbit in MB units  */
+    MV_U32  numberOfDevices;
+
+} MV_DIMM_INFO;
+
+
+MV_STATUS mvDramBankInfoGet(MV_U32 bankNum, MV_DRAM_BANK_INFO *pBankInfo);
+MV_STATUS dimmSpdGet(MV_U32 dimmNum, MV_DIMM_INFO *pDimmInfo);
+MV_VOID dimmSpdPrint(MV_U32 dimmNum);
+MV_STATUS dimmSpdCpy(MV_VOID);
+
+#endif /* __INCmvDram */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEth.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEth.c
new file mode 100644
index 0000000000..d24e788fc7
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEth.c
@@ -0,0 +1,2952 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+        this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+/*******************************************************************************
+* mvEth.c - Marvell's Gigabit Ethernet controller low level driver
+*
+* DESCRIPTION:
+*       This file introduce OS independent APIs to Marvell's Gigabit Ethernet
+*       controller. This Gigabit Ethernet Controller driver API controls
+*       1) Operations (i.e. port Init, Finish, Up, Down, PhyReset etc').
+*       2) Data flow (i.e. port Send, Receive etc').
+*       3) MAC Filtering functions (ethSetMcastAddr, ethSetRxFilterMode, etc.)
+*       4) MIB counters support (ethReadMibCounter)
+*       5) Debug functions (ethPortRegs, ethPortCounters, ethPortQueues, etc.)
+*       Each Gigabit Ethernet port is controlled via ETH_PORT_CTRL struct.
+*       This struct includes configuration information as well as driver
+*       internal data needed for its operations.
+*
+*       Supported Features:
+*       - OS independent. All required OS services are implemented via external 
+*       OS dependent components (like osLayer or ethOsg)
+*       - The user is free from Rx/Tx queue managing.
+*       - Simple Gigabit Ethernet port operation API.
+*       - Simple Gigabit Ethernet port data flow API.
+*       - Data flow and operation API support per queue functionality.
+*       - Support cached descriptors for better performance.
+*       - PHY access and control API.
+*       - Port Configuration API.
+*       - Full control over Special and Other Multicast MAC tables.
+*
+*******************************************************************************/
+/* includes */
+#include "mvTypes.h"
+#include "mv802_3.h"
+#include "mvDebug.h"
+#include "mvCommon.h"
+#include "mvOs.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "eth-phy/mvEthPhy.h"
+#include "eth/mvEth.h"
+#include "eth/gbe/mvEthGbe.h"
+#include "cpu/mvCpu.h"
+
+#ifdef INCLUDE_SYNC_BARR
+#include "sys/mvCpuIf.h"
+#endif
+
+#ifdef MV_RT_DEBUG
+#   define ETH_DEBUG
+#endif
+
+
+/* locals */
+MV_BOOL         ethDescInSram;
+MV_BOOL         ethDescSwCoher;
+
+/* This array holds the control structure of each port */
+ETH_PORT_CTRL* ethPortCtrl[MV_ETH_MAX_PORTS];
+
+/* Ethernet Port Local routines */
+
+static void    ethInitRxDescRing(ETH_PORT_CTRL* pPortCtrl, int queue);
+
+static void    ethInitTxDescRing(ETH_PORT_CTRL* pPortCtrl, int queue);
+
+static void    ethSetUcastTable(int portNo, int queue);
+
+static MV_BOOL ethSetUcastAddr (int ethPortNum, MV_U8 lastNibble, int queue);
+static MV_BOOL ethSetSpecialMcastAddr(int ethPortNum, MV_U8 lastByte, int queue);
+static MV_BOOL ethSetOtherMcastAddr(int ethPortNum, MV_U8 crc8, int queue);
+
+static void    ethFreeDescrMemory(ETH_PORT_CTRL* pEthPortCtrl, MV_BUF_INFO* pDescBuf);
+static MV_U8*  ethAllocDescrMemory(ETH_PORT_CTRL* pEthPortCtrl, int size, 
+                                   MV_ULONG* pPhysAddr, MV_U32 *memHandle);
+
+static MV_U32 mvEthMruGet(MV_U32 maxRxPktSize);
+
+static void mvEthPortSgmiiConfig(int port);
+
+
+
+/******************************************************************************/
+/*                      EthDrv Initialization functions                       */
+/******************************************************************************/
+
+/*******************************************************************************
+* mvEthHalInit - Initialize the Giga Ethernet unit
+*
+* DESCRIPTION:
+*       This function initialize the Giga Ethernet unit.
+*       1) Configure Address decode windows of the unit
+*       2) Set registers to HW default values. 
+*       3) Clear and Disable interrupts
+*
+* INPUT:  NONE
+*
+* RETURN: NONE
+*
+* NOTE: this function is called once in the boot process.
+*******************************************************************************/
+void    mvEthHalInit(void)
+{
+    int port;
+
+    /* Init static data structures */
+    for (port=0; port<MV_ETH_MAX_PORTS; port++)
+    {
+        ethPortCtrl[port] = NULL;
+    }
+    /* Power down all existing ports */
+    for(port=0; port<mvCtrlEthMaxPortGet(); port++)
+    {
+
+#if defined (MV78200)
+	    /* Skip ports mapped to another CPU*/
+	if (MV_FALSE == mvSocUnitIsMappedToThisCpu(GIGA0+port))
+	{
+		    continue;
+	}		
+#endif
+
+	/* Skip power down ports */
+	if (MV_FALSE == mvCtrlPwrClckGet(ETH_GIG_UNIT_ID, port)) continue;
+
+        /* Disable Giga Ethernet Unit interrupts */
+        MV_REG_WRITE(ETH_UNIT_INTR_MASK_REG(port), 0);
+
+        /* Clear ETH_UNIT_INTR_CAUSE_REG register */
+        MV_REG_WRITE(ETH_UNIT_INTR_CAUSE_REG(port), 0);
+
+    }
+
+    mvEthMemAttrGet(&ethDescInSram, &ethDescSwCoher);
+
+#if defined(ETH_DESCR_IN_SRAM)
+    if(ethDescInSram == MV_FALSE)
+    {
+        mvOsPrintf("ethDrv: WARNING! Descriptors will be allocated in DRAM instead of SRAM.\n");
+    }
+#endif /* ETH_DESCR_IN_SRAM */
+}
+
+/*******************************************************************************
+* mvEthMemAttrGet - Define properties (SRAM/DRAM, SW_COHER / HW_COHER / UNCACHED) 
+*                       of of memory location for RX and TX descriptors.
+*
+* DESCRIPTION:
+*       This function allocates memory for RX and TX descriptors.
+*       - If ETH_DESCR_IN_SRAM defined, allocate from SRAM memory.
+*       - If ETH_DESCR_IN_SDRAM defined, allocate from SDRAM memory.
+*
+* INPUT:
+*   MV_BOOL* pIsSram - place of descriptors: 
+*                      MV_TRUE  - in SRAM
+*                      MV_FALSE - in DRAM
+*   MV_BOOL* pIsSwCoher - cache coherency of descriptors:
+*                      MV_TRUE  - driver is responsible for cache coherency
+*                      MV_FALSE - driver is not responsible for cache coherency
+*
+* RETURN:
+*
+*******************************************************************************/
+void   mvEthMemAttrGet(MV_BOOL* pIsSram, MV_BOOL* pIsSwCoher)
+{
+    MV_BOOL isSram, isSwCoher;
+
+    isSram = MV_FALSE;
+#if (ETHER_DRAM_COHER == MV_CACHE_COHER_SW) 
+    isSwCoher = MV_TRUE;
+#else 
+    isSwCoher = MV_FALSE;
+#endif
+
+#if defined(ETH_DESCR_IN_SRAM)
+    if( mvCtrlSramSizeGet() > 0)
+    {
+        isSram = MV_TRUE;
+        #if (INTEG_SRAM_COHER == MV_CACHE_COHER_SW) 
+            isSwCoher = MV_TRUE;
+        #else 
+            isSwCoher = MV_FALSE;
+        #endif
+    }
+#endif /* ETH_DESCR_IN_SRAM */
+
+    if(pIsSram != NULL)
+        *pIsSram = isSram;
+
+    if(pIsSwCoher != NULL)
+        *pIsSwCoher = isSwCoher;
+}
+
+
+
+/******************************************************************************/
+/*                      Port Initialization functions                         */
+/******************************************************************************/
+
+/*******************************************************************************
+* mvEthPortInit - Initialize the Ethernet port driver
+*
+* DESCRIPTION:
+*       This function initialize the ethernet port.
+*       1) Allocate and initialize internal port Control structure.
+*       2) Create RX and TX descriptor rings for default RX and TX queues
+*       3) Disable RX and TX operations, clear cause registers and 
+*          mask all interrupts.
+*       4) Set all registers to default values and clean all MAC tables. 
+*
+* INPUT:
+*       int             portNo          - Ethernet port number
+*       ETH_PORT_INIT   *pEthPortInit   - Ethernet port init structure
+*
+* RETURN:
+*       void* - ethernet port handler, that should be passed to the most other
+*               functions dealing with this port.
+*
+* NOTE: This function is called once per port when loading the eth module.
+*******************************************************************************/
+void*   mvEthPortInit(int portNo, MV_ETH_PORT_INIT *pEthPortInit)
+{
+    int             queue, descSize;
+    ETH_PORT_CTRL*  pPortCtrl;
+
+    /* Check validity of parameters */
+    if( (portNo >= (int)mvCtrlEthMaxPortGet()) || 
+        (pEthPortInit->rxDefQ   >= MV_ETH_RX_Q_NUM)  ||
+        (pEthPortInit->maxRxPktSize < 1518) )
+    {
+        mvOsPrintf("EthPort #%d: Bad initialization parameters\n", portNo);
+        return NULL;
+    }
+    if( (pEthPortInit->rxDescrNum[pEthPortInit->rxDefQ]) == 0)
+    {
+        mvOsPrintf("EthPort #%d: rxDefQ (%d) must be created\n", 
+                    portNo, pEthPortInit->rxDefQ);
+        return NULL;
+    }
+
+    pPortCtrl = (ETH_PORT_CTRL*)mvOsMalloc( sizeof(ETH_PORT_CTRL) );
+    if(pPortCtrl == NULL)   
+    {
+       mvOsPrintf("EthDrv: Can't allocate %dB for port #%d control structure!\n",
+                   (int)sizeof(ETH_PORT_CTRL), portNo);
+       return NULL;
+    }
+
+    memset(pPortCtrl, 0, sizeof(ETH_PORT_CTRL) );
+    ethPortCtrl[portNo] = pPortCtrl;
+
+    pPortCtrl->portState = MV_UNDEFINED_STATE;
+
+    pPortCtrl->portNo = portNo;
+
+    pPortCtrl->osHandle = pEthPortInit->osHandle;
+
+    /* Copy Configuration parameters */
+    pPortCtrl->portConfig.maxRxPktSize = pEthPortInit->maxRxPktSize;
+    pPortCtrl->portConfig.rxDefQ = pEthPortInit->rxDefQ;
+    pPortCtrl->portConfig.ejpMode = 0;
+
+    for( queue=0; queue<MV_ETH_RX_Q_NUM; queue++ )
+    {
+        pPortCtrl->rxQueueConfig[queue].descrNum = pEthPortInit->rxDescrNum[queue];
+    }
+    for( queue=0; queue<MV_ETH_TX_Q_NUM; queue++ )
+    {
+        pPortCtrl->txQueueConfig[queue].descrNum = pEthPortInit->txDescrNum[queue];
+    }
+
+    mvEthPortDisable(pPortCtrl);
+
+    /* Set the board information regarding PHY address */
+    mvEthPhyAddrSet(pPortCtrl, mvBoardPhyAddrGet(portNo) );
+
+    /* Create all requested RX queues */
+    for(queue=0; queue<MV_ETH_RX_Q_NUM; queue++)
+    {
+        if(pPortCtrl->rxQueueConfig[queue].descrNum == 0)
+            continue;
+
+        /* Allocate memory for RX descriptors */
+        descSize = ((pPortCtrl->rxQueueConfig[queue].descrNum * ETH_RX_DESC_ALIGNED_SIZE) +
+                                                        CPU_D_CACHE_LINE_SIZE);
+ 
+        pPortCtrl->rxQueue[queue].descBuf.bufVirtPtr = 
+                        ethAllocDescrMemory(pPortCtrl, descSize, 
+					    &pPortCtrl->rxQueue[queue].descBuf.bufPhysAddr,
+					    &pPortCtrl->rxQueue[queue].descBuf.memHandle);
+        pPortCtrl->rxQueue[queue].descBuf.bufSize = descSize;
+        if(pPortCtrl->rxQueue[queue].descBuf.bufVirtPtr == NULL)
+        {
+            mvOsPrintf("EthPort #%d, rxQ=%d: Can't allocate %d bytes in %s for %d RX descr\n", 
+                        pPortCtrl->portNo, queue, descSize, 
+                        ethDescInSram ? "SRAM" : "DRAM",
+                        pPortCtrl->rxQueueConfig[queue].descrNum);
+            return NULL;
+        }
+
+        ethInitRxDescRing(pPortCtrl, queue);
+    }
+    /* Create TX queues */
+    for(queue=0; queue<MV_ETH_TX_Q_NUM; queue++)
+    {
+        if(pPortCtrl->txQueueConfig[queue].descrNum == 0)
+            continue;
+
+        /* Allocate memory for TX descriptors */
+        descSize = ((pPortCtrl->txQueueConfig[queue].descrNum * ETH_TX_DESC_ALIGNED_SIZE) +
+                                                        CPU_D_CACHE_LINE_SIZE);
+ 
+        pPortCtrl->txQueue[queue].descBuf.bufVirtPtr = 
+		ethAllocDescrMemory(pPortCtrl, descSize,
+				    &pPortCtrl->txQueue[queue].descBuf.bufPhysAddr,
+				    &pPortCtrl->txQueue[queue].descBuf.memHandle);
+        pPortCtrl->txQueue[queue].descBuf.bufSize = descSize;
+        if(pPortCtrl->txQueue[queue].descBuf.bufVirtPtr == NULL)
+        {
+            mvOsPrintf("EthPort #%d, txQ=%d: Can't allocate %d bytes in %s for %d TX descr\n", 
+                        pPortCtrl->portNo, queue, descSize, ethDescInSram ? "SRAM" : "DRAM",
+                        pPortCtrl->txQueueConfig[queue].descrNum);
+            return NULL;
+        }
+
+        ethInitTxDescRing(pPortCtrl, queue);
+    }
+    mvEthDefaultsSet(pPortCtrl);
+
+    pPortCtrl->portState = MV_IDLE;
+    return pPortCtrl;
+}
+
+/*******************************************************************************
+* ethPortFinish - Finish the Ethernet port driver
+*
+* DESCRIPTION:
+*       This function finish the ethernet port.
+*       1) Down ethernet port if needed.
+*       2) Delete RX and TX descriptor rings for all created RX and TX queues
+*       3) Free internal port Control structure.
+*
+* INPUT:
+*       void*   pEthPortHndl  - Ethernet port handler
+*
+* RETURN:   NONE.
+*
+*******************************************************************************/
+void    mvEthPortFinish(void* pPortHndl)
+{
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+    int             queue, portNo  = pPortCtrl->portNo;
+
+    if(pPortCtrl->portState == MV_ACTIVE)
+    {
+        mvOsPrintf("ethPort #%d: Warning !!! Finish port in Active state\n",
+                 portNo);
+        mvEthPortDisable(pPortHndl);
+    }
+
+    /* Free all allocated RX queues */
+    for(queue=0; queue<MV_ETH_RX_Q_NUM; queue++)
+    {
+        ethFreeDescrMemory(pPortCtrl, &pPortCtrl->rxQueue[queue].descBuf);
+    }
+
+    /* Free all allocated TX queues */
+    for(queue=0; queue<MV_ETH_TX_Q_NUM; queue++)
+    {
+        ethFreeDescrMemory(pPortCtrl, &pPortCtrl->txQueue[queue].descBuf);
+    }
+
+    /* Free port control structure */
+    mvOsFree(pPortCtrl);
+
+    ethPortCtrl[portNo] = NULL;
+}
+
+/*******************************************************************************
+* mvEthDefaultsSet - Set defaults to the ethernet port
+*
+* DESCRIPTION:
+*       This function set default values to the ethernet port.
+*       1) Clear Cause registers and Mask all interrupts
+*       2) Clear all MAC tables
+*       3) Set defaults to all registers
+*       4) Reset all created RX and TX descriptors ring
+*       5) Reset PHY
+*
+* INPUT:
+*       void*   pEthPortHndl  - Ethernet port handler
+*
+* RETURN:   MV_STATUS  
+*               MV_OK - Success, Others - Failure
+* NOTE:
+*   This function update all the port configuration except those set
+*   Initialy by the OsGlue by MV_ETH_PORT_INIT.
+*   This function can be called after portDown to return the port setting 
+*   to defaults.
+*******************************************************************************/
+MV_STATUS   mvEthDefaultsSet(void* pPortHndl)
+{
+    int                 ethPortNo, queue;
+    ETH_PORT_CTRL*      pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+    ETH_QUEUE_CTRL*     pQueueCtrl;
+    MV_U32              txPrio;
+    MV_U32              portCfgReg, portCfgExtReg, portSerialCtrlReg, portSerialCtrl1Reg, portSdmaCfgReg;
+    MV_BOARD_MAC_SPEED  boardMacCfg;
+
+    ethPortNo = pPortCtrl->portNo;
+
+    /* Clear Cause registers */
+    MV_REG_WRITE(ETH_INTR_CAUSE_REG(ethPortNo),0);
+    MV_REG_WRITE(ETH_INTR_CAUSE_EXT_REG(ethPortNo),0);
+
+    /* Mask all interrupts */
+    MV_REG_WRITE(ETH_INTR_MASK_REG(ethPortNo),0);
+    MV_REG_WRITE(ETH_INTR_MASK_EXT_REG(ethPortNo),0);
+
+    portCfgReg  =   PORT_CONFIG_VALUE;
+    portCfgExtReg  =  PORT_CONFIG_EXTEND_VALUE;
+
+    boardMacCfg = mvBoardMacSpeedGet(ethPortNo);
+
+    if(boardMacCfg == BOARD_MAC_SPEED_100M)
+    {
+        portSerialCtrlReg = PORT_SERIAL_CONTROL_100MB_FORCE_VALUE;
+    }
+    else if(boardMacCfg == BOARD_MAC_SPEED_1000M)
+    {
+        portSerialCtrlReg = PORT_SERIAL_CONTROL_1000MB_FORCE_VALUE;
+    }
+    else
+    {
+        portSerialCtrlReg =  PORT_SERIAL_CONTROL_VALUE;
+    }
+
+    /* build PORT_SDMA_CONFIG_REG */
+    portSdmaCfgReg = ETH_TX_INTR_COAL_MASK(0);
+    portSdmaCfgReg |= ETH_TX_BURST_SIZE_MASK(ETH_BURST_SIZE_16_64BIT_VALUE);
+
+#if ( (ETHER_DRAM_COHER == MV_CACHE_COHER_HW_WB) ||  \
+      (ETHER_DRAM_COHER == MV_CACHE_COHER_HW_WT) )
+    /* some devices have restricted RX burst size when using HW coherency */
+    portSdmaCfgReg |= ETH_RX_BURST_SIZE_MASK(ETH_BURST_SIZE_4_64BIT_VALUE);
+#else
+    portSdmaCfgReg |= ETH_RX_BURST_SIZE_MASK(ETH_BURST_SIZE_16_64BIT_VALUE);
+#endif
+
+#if defined(MV_CPU_BE)
+    /* big endian */
+# if defined(MV_ARM)
+    portSdmaCfgReg |= (ETH_RX_NO_DATA_SWAP_MASK |
+                       ETH_TX_NO_DATA_SWAP_MASK |
+                       ETH_DESC_SWAP_MASK);
+# elif defined(MV_PPC)
+    portSdmaCfgReg |= (ETH_RX_DATA_SWAP_MASK |
+                       ETH_TX_DATA_SWAP_MASK |
+                       ETH_NO_DESC_SWAP_MASK);
+# else
+# error "Giga Ethernet Swap policy is not defined for the CPU_ARCH"
+# endif /* MV_ARM / MV_PPC */
+
+#else /* MV_CPU_LE */
+    /* little endian */
+    portSdmaCfgReg |= (ETH_RX_NO_DATA_SWAP_MASK | 
+                       ETH_TX_NO_DATA_SWAP_MASK | 
+                       ETH_NO_DESC_SWAP_MASK);
+#endif /* MV_CPU_BE / MV_CPU_LE */
+
+    pPortCtrl->portRxQueueCmdReg = 0;
+    pPortCtrl->portTxQueueCmdReg = 0;
+
+#if (MV_ETH_VERSION >= 4) 
+    if(pPortCtrl->portConfig.ejpMode == MV_TRUE)
+    {
+        MV_REG_WRITE(ETH_TXQ_CMD_1_REG(ethPortNo), ETH_TX_EJP_ENABLE_MASK);
+    }
+    else
+    {
+        MV_REG_WRITE(ETH_TXQ_CMD_1_REG(ethPortNo), 0)
+    }
+#endif /* (MV_ETH_VERSION >= 4) */
+
+    ethSetUcastTable(ethPortNo, -1);
+    mvEthSetSpecialMcastTable(ethPortNo, -1);
+    mvEthSetOtherMcastTable(ethPortNo, -1);
+
+    portSerialCtrlReg &= ~ETH_MAX_RX_PACKET_SIZE_MASK;
+
+    portSerialCtrlReg |= mvEthMruGet(pPortCtrl->portConfig.maxRxPktSize);
+
+    MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(ethPortNo), portSerialCtrlReg);
+
+    /* Update value of PortConfig register accordingly with all RxQueue types */
+    pPortCtrl->portConfig.rxArpQ = pPortCtrl->portConfig.rxDefQ;
+    pPortCtrl->portConfig.rxBpduQ = pPortCtrl->portConfig.rxDefQ; 
+    pPortCtrl->portConfig.rxTcpQ = pPortCtrl->portConfig.rxDefQ; 
+    pPortCtrl->portConfig.rxUdpQ = pPortCtrl->portConfig.rxDefQ; 
+
+    portCfgReg &= ~ETH_DEF_RX_QUEUE_ALL_MASK;
+    portCfgReg |= ETH_DEF_RX_QUEUE_MASK(pPortCtrl->portConfig.rxDefQ);
+    
+    portCfgReg &= ~ETH_DEF_RX_ARP_QUEUE_ALL_MASK;
+    portCfgReg |= ETH_DEF_RX_ARP_QUEUE_MASK(pPortCtrl->portConfig.rxArpQ); 
+
+    portCfgReg &= ~ETH_DEF_RX_BPDU_QUEUE_ALL_MASK;
+    portCfgReg |= ETH_DEF_RX_BPDU_QUEUE_MASK(pPortCtrl->portConfig.rxBpduQ);
+
+    portCfgReg &= ~ETH_DEF_RX_TCP_QUEUE_ALL_MASK;
+    portCfgReg |= ETH_DEF_RX_TCP_QUEUE_MASK(pPortCtrl->portConfig.rxTcpQ);
+
+    portCfgReg &= ~ETH_DEF_RX_UDP_QUEUE_ALL_MASK;
+    portCfgReg |= ETH_DEF_RX_UDP_QUEUE_MASK(pPortCtrl->portConfig.rxUdpQ);
+
+    /* Assignment of Tx CTRP of given queue */
+    txPrio = 0;
+
+    for(queue=0; queue<MV_ETH_TX_Q_NUM; queue++)
+    {
+        pQueueCtrl = &pPortCtrl->txQueue[queue];
+
+        if(pQueueCtrl->pFirstDescr != NULL)
+        {
+            ethResetTxDescRing(pPortCtrl, queue);
+
+            MV_REG_WRITE(ETH_TXQ_TOKEN_COUNT_REG(ethPortNo, queue),
+                         0x3fffffff);
+            MV_REG_WRITE(ETH_TXQ_TOKEN_CFG_REG(ethPortNo, queue), 
+                         0x03ffffff);
+        }
+        else
+        {
+            MV_REG_WRITE(ETH_TXQ_TOKEN_COUNT_REG(ethPortNo, queue),  0x0);
+            MV_REG_WRITE(ETH_TXQ_TOKEN_CFG_REG(ethPortNo, queue), 0x0);
+        }
+    }
+
+    /* Assignment of Rx CRDP of given queue */
+    for(queue=0; queue<MV_ETH_RX_Q_NUM; queue++)
+    {
+        ethResetRxDescRing(pPortCtrl, queue);
+    }
+
+    /* Allow receiving packes with odd number of preamble nibbles */
+    portSerialCtrl1Reg = MV_REG_READ(ETH_PORT_SERIAL_CTRL_1_REG(ethPortNo));
+    portSerialCtrl1Reg |= ETH_EN_MII_ODD_PRE_MASK;
+    MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_1_REG(ethPortNo), portSerialCtrl1Reg);
+
+    /* Assign port configuration and command. */
+    MV_REG_WRITE(ETH_PORT_CONFIG_REG(ethPortNo), portCfgReg);
+
+    MV_REG_WRITE(ETH_PORT_CONFIG_EXTEND_REG(ethPortNo), portCfgExtReg);
+
+    /* Assign port SDMA configuration */
+    MV_REG_WRITE(ETH_SDMA_CONFIG_REG(ethPortNo), portSdmaCfgReg);
+    
+    /* Turn off the port/queue bandwidth limitation */
+    MV_REG_WRITE(ETH_MAX_TRANSMIT_UNIT_REG(ethPortNo), 0x0);
+
+    return MV_OK;
+}
+
+/*******************************************************************************
+* ethPortUp - Start the Ethernet port RX and TX activity.
+*
+* DESCRIPTION:
+*       This routine start Rx and Tx activity:
+*
+*       Note: Each Rx and Tx queue descriptor's list must be initialized prior
+*       to calling this function (use etherInitTxDescRing for Tx queues and
+*       etherInitRxDescRing for Rx queues).
+*
+* INPUT:
+*       void*   pEthPortHndl  - Ethernet port handler
+*
+* RETURN:   MV_STATUS
+*           MV_OK - Success, Others - Failure.
+*
+* NOTE : used for port link up.
+*******************************************************************************/
+MV_STATUS   mvEthPortUp(void* pEthPortHndl)
+{
+    int             ethPortNo;
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl;
+
+    ethPortNo = pPortCtrl->portNo;
+    
+    if( (pPortCtrl->portState != MV_ACTIVE) && 
+        (pPortCtrl->portState != MV_PAUSED) )
+    {
+        mvOsPrintf("ethDrv port%d: Unexpected port state %d\n", 
+                        ethPortNo, pPortCtrl->portState);
+        return MV_BAD_STATE;
+    }
+    
+    ethPortNo = pPortCtrl->portNo;
+
+    /* Enable port RX. */
+    MV_REG_WRITE(ETH_RX_QUEUE_COMMAND_REG(ethPortNo), pPortCtrl->portRxQueueCmdReg);
+
+    /* Enable port TX. */
+    MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(ethPortNo)) = pPortCtrl->portTxQueueCmdReg;
+
+    pPortCtrl->portState = MV_ACTIVE;
+
+    return MV_OK;
+}
+
+/*******************************************************************************
+* ethPortDown - Stop the Ethernet port activity.
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       void*   pEthPortHndl  - Ethernet port handler
+*
+* RETURN:   MV_STATUS
+*               MV_OK - Success, Others - Failure.
+*
+* NOTE : used for port link down.
+*******************************************************************************/
+MV_STATUS   mvEthPortDown(void* pEthPortHndl)
+{
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl;
+    int             ethPortNum = pPortCtrl->portNo;
+    unsigned int    regData;
+    volatile int    uDelay, mDelay;
+
+    /* Stop Rx port activity. Check port Rx activity. */
+    regData = (MV_REG_READ(ETH_RX_QUEUE_COMMAND_REG(ethPortNum))) & ETH_RXQ_ENABLE_MASK;
+    if(regData != 0)
+    {
+        /* Issue stop command for active channels only */
+        MV_REG_WRITE(ETH_RX_QUEUE_COMMAND_REG(ethPortNum), (regData << ETH_RXQ_DISABLE_OFFSET));
+    }
+
+    /* Stop Tx port activity. Check port Tx activity. */
+    regData = (MV_REG_READ(ETH_TX_QUEUE_COMMAND_REG(ethPortNum))) & ETH_TXQ_ENABLE_MASK;
+    if(regData != 0)
+    {
+        /* Issue stop command for active channels only */
+        MV_REG_WRITE(ETH_TX_QUEUE_COMMAND_REG(ethPortNum), 
+                            (regData << ETH_TXQ_DISABLE_OFFSET) ); 
+    }
+
+    /* Force link down */
+/*
+    regData = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(ethPortNum));
+    regData &= ~(ETH_DO_NOT_FORCE_LINK_FAIL_MASK);
+    MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(ethPortNum), regData);
+*/
+    /* Wait for all Rx activity to terminate. */
+    mDelay = 0;
+    do
+    {
+        if(mDelay >= RX_DISABLE_TIMEOUT_MSEC)
+        {
+            mvOsPrintf("ethPort_%d: TIMEOUT for RX stopped !!! rxQueueCmd - 0x08%x\n", 
+                        ethPortNum, regData);
+            break;
+        }
+        mvOsDelay(1);
+        mDelay++;
+        
+        /* Check port RX Command register that all Rx queues are stopped */
+        regData = MV_REG_READ(ETH_RX_QUEUE_COMMAND_REG(ethPortNum));
+    }
+    while(regData & 0xFF);
+
+    /* Wait for all Tx activity to terminate. */
+    mDelay = 0;
+    do
+    {
+        if(mDelay >= TX_DISABLE_TIMEOUT_MSEC)
+        {
+            mvOsPrintf("ethPort_%d: TIMEOUT for TX stoped !!! txQueueCmd - 0x08%x\n", 
+                        ethPortNum, regData);
+            break;
+        }
+        mvOsDelay(1);
+        mDelay++;
+
+        /* Check port TX Command register that all Tx queues are stopped */
+        regData = MV_REG_READ(ETH_TX_QUEUE_COMMAND_REG(ethPortNum));
+    }
+    while(regData & 0xFF);
+    
+    /* Double check to Verify that TX FIFO is Empty */
+    mDelay = 0;
+    while(MV_TRUE)
+    {
+        do
+        {
+            if(mDelay >= TX_FIFO_EMPTY_TIMEOUT_MSEC)
+            {
+                mvOsPrintf("\n ethPort_%d: TIMEOUT for TX FIFO empty !!! portStatus - 0x08%x\n", 
+                            ethPortNum, regData);
+                break;
+            }
+            mvOsDelay(1);
+            mDelay++;
+
+            regData = MV_REG_READ(ETH_PORT_STATUS_REG(ethPortNum));
+        }
+        while( ((regData & ETH_TX_FIFO_EMPTY_MASK) == 0) || 
+               ((regData & ETH_TX_IN_PROGRESS_MASK) != 0) );
+
+        if(mDelay >= TX_FIFO_EMPTY_TIMEOUT_MSEC)
+            break;
+
+        /* Double check */
+        regData = MV_REG_READ(ETH_PORT_STATUS_REG(ethPortNum));
+        if( ((regData & ETH_TX_FIFO_EMPTY_MASK) != 0) && 
+            ((regData & ETH_TX_IN_PROGRESS_MASK) == 0) )
+        {
+            break;
+        }
+        else
+            mvOsPrintf("ethPort_%d: TX FIFO Empty double check failed. %d msec, portStatus=0x%x\n",
+                                ethPortNum, mDelay, regData);     
+    }
+
+    /* Do NOT force link down */
+/*
+    regData = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(ethPortNum));
+    regData |= (ETH_DO_NOT_FORCE_LINK_FAIL_MASK);
+    MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(ethPortNum), regData);
+*/
+    /* Wait about 2500 tclk cycles */
+    uDelay = (PORT_DISABLE_WAIT_TCLOCKS/(mvBoardTclkGet()/1000000));
+    mvOsUDelay(uDelay);
+
+    pPortCtrl->portState = MV_PAUSED;
+
+    return MV_OK;   
+}
+
+
+/*******************************************************************************
+* ethPortEnable - Enable the Ethernet port and Start RX and TX.
+*
+* DESCRIPTION:
+*       This routine enable the Ethernet port and Rx and Tx activity:
+*
+*       Note: Each Rx and Tx queue descriptor's list must be initialized prior
+*       to calling this function (use etherInitTxDescRing for Tx queues and
+*       etherInitRxDescRing for Rx queues).
+*
+* INPUT:
+*       void*   pEthPortHndl  - Ethernet port handler
+*
+* RETURN:   MV_STATUS
+*               MV_OK - Success, Others - Failure.
+*
+* NOTE: main usage is to enable the port after ifconfig up.
+*******************************************************************************/
+MV_STATUS   mvEthPortEnable(void* pEthPortHndl)
+{
+    int             ethPortNo;
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl;
+    MV_U32      portSerialCtrlReg;
+
+    ethPortNo = pPortCtrl->portNo;
+
+    /* Enable port */
+    portSerialCtrlReg = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(ethPortNo));
+    portSerialCtrlReg |= (ETH_DO_NOT_FORCE_LINK_FAIL_MASK | ETH_PORT_ENABLE_MASK);
+
+    MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(ethPortNo), portSerialCtrlReg);
+
+    mvEthMibCountersClear(pEthPortHndl);
+
+    pPortCtrl->portState = MV_PAUSED;
+
+    /* If Link is UP, Start RX and TX traffic */
+    if( MV_REG_READ( ETH_PORT_STATUS_REG(ethPortNo) ) & ETH_LINK_UP_MASK)
+        return( mvEthPortUp(pEthPortHndl) );
+    
+    return MV_NOT_READY;
+}
+
+
+/*******************************************************************************
+* mvEthPortDisable - Stop RX and TX activities and Disable the Ethernet port.
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       void*   pEthPortHndl  - Ethernet port handler
+*
+* RETURN:   MV_STATUS
+*               MV_OK - Success, Others - Failure.
+*
+* NOTE: main usage is to disable the port after ifconfig down.
+*******************************************************************************/
+MV_STATUS   mvEthPortDisable(void* pEthPortHndl)
+{
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl;
+    int             ethPortNum = pPortCtrl->portNo;
+    unsigned int    regData;
+    volatile int    mvDelay;
+
+    if(pPortCtrl->portState == MV_ACTIVE)           
+    {    
+        /* Stop RX and TX activities */
+        mvEthPortDown(pEthPortHndl);
+    }
+
+    /* Reset the Enable bit in the Serial Control Register */
+    regData = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(ethPortNum));
+    regData &= ~(ETH_PORT_ENABLE_MASK);
+    MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(ethPortNum), regData);
+
+    /* Wait about 2500 tclk cycles */
+    mvDelay = (PORT_DISABLE_WAIT_TCLOCKS*(mvCpuPclkGet()/mvBoardTclkGet()));
+    for(mvDelay; mvDelay>0; mvDelay--);
+
+    pPortCtrl->portState = MV_IDLE;
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvEthPortForceTxDone - Get next buffer from TX queue in spite of buffer ownership.
+*
+* DESCRIPTION:
+*       This routine used to free buffers attached to the Tx ring and should
+*       be called only when Giga Ethernet port is Down
+*
+* INPUT:
+*       void*       pEthPortHndl    - Ethernet Port handler.
+*       int         txQueue         - Number of TX queue.
+*
+* OUTPUT:
+*       MV_PKT_INFO *pPktInfo       - Pointer to packet was sent.
+*
+* RETURN:
+*       MV_EMPTY    - There is no more buffers in this queue.
+*       MV_OK       - Buffer detached from the queue and pPktInfo structure 
+*                   filled with relevant information.
+*
+*******************************************************************************/
+MV_PKT_INFO*    mvEthPortForceTxDone(void* pEthPortHndl, int txQueue)
+{
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl;
+    ETH_QUEUE_CTRL* pQueueCtrl;
+    MV_PKT_INFO*    pPktInfo;
+    ETH_TX_DESC*    pTxDesc;
+    int             port = pPortCtrl->portNo;
+       
+    pQueueCtrl = &pPortCtrl->txQueue[txQueue];
+
+    while( (pQueueCtrl->pUsedDescr != pQueueCtrl->pCurrentDescr) ||
+           (pQueueCtrl->resource == 0) )
+    {
+        /* Free next descriptor */
+        pQueueCtrl->resource++;
+        pTxDesc = (ETH_TX_DESC*)pQueueCtrl->pUsedDescr;
+
+	/* pPktInfo is available only in descriptors which are last descriptors */
+        pPktInfo = (MV_PKT_INFO*)pTxDesc->returnInfo;
+	if (pPktInfo)
+        	pPktInfo->status = pTxDesc->cmdSts;
+
+        pTxDesc->cmdSts = 0x0;
+        pTxDesc->returnInfo = 0x0;
+        ETH_DESCR_FLUSH_INV(pPortCtrl, pTxDesc);
+
+        pQueueCtrl->pUsedDescr = TX_NEXT_DESC_PTR(pTxDesc, pQueueCtrl);
+
+        if (pPktInfo)
+		if (pPktInfo->status  & ETH_TX_LAST_DESC_MASK) 
+            		return pPktInfo;
+    }   
+    MV_REG_WRITE( ETH_TX_CUR_DESC_PTR_REG(port, txQueue), 
+                    (MV_U32)ethDescVirtToPhy(pQueueCtrl, pQueueCtrl->pCurrentDescr) );
+    return NULL;
+}
+
+        
+
+/*******************************************************************************
+* mvEthPortForceRx - Get next buffer from RX queue in spite of buffer ownership.
+*
+* DESCRIPTION:
+*       This routine used to free buffers attached to the Rx ring and should
+*       be called only when Giga Ethernet port is Down
+*
+* INPUT:
+*       void*       pEthPortHndl    - Ethernet Port handler.
+*       int         rxQueue         - Number of Rx queue.
+*
+* OUTPUT:
+*       MV_PKT_INFO *pPktInfo       - Pointer to received packet.
+*
+* RETURN:
+*       MV_EMPTY    - There is no more buffers in this queue.
+*       MV_OK       - Buffer detached from the queue and pBufInfo structure 
+*                   filled with relevant information.
+*
+*******************************************************************************/
+MV_PKT_INFO*    mvEthPortForceRx(void* pEthPortHndl, int rxQueue)
+{
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl;
+    ETH_QUEUE_CTRL* pQueueCtrl;
+    ETH_RX_DESC*    pRxDesc;
+    MV_PKT_INFO*    pPktInfo;
+    int             port = pPortCtrl->portNo;
+       
+    pQueueCtrl = &pPortCtrl->rxQueue[rxQueue];
+
+    if(pQueueCtrl->resource == 0)
+    {
+        MV_REG_WRITE( ETH_RX_CUR_DESC_PTR_REG(port, rxQueue), 
+                    (MV_U32)ethDescVirtToPhy(pQueueCtrl, pQueueCtrl->pCurrentDescr) );
+
+        return NULL;
+    }
+    /* Free next descriptor */
+    pQueueCtrl->resource--;
+    pRxDesc = (ETH_RX_DESC*)pQueueCtrl->pCurrentDescr;
+    pPktInfo = (MV_PKT_INFO*)pRxDesc->returnInfo;
+
+    pPktInfo->status  = pRxDesc->cmdSts;
+    pRxDesc->cmdSts = 0x0;
+    pRxDesc->returnInfo = 0x0;
+    ETH_DESCR_FLUSH_INV(pPortCtrl, pRxDesc);
+
+    pQueueCtrl->pCurrentDescr = RX_NEXT_DESC_PTR(pRxDesc, pQueueCtrl);
+    return pPktInfo;    
+}
+
+
+/******************************************************************************/
+/*                          Port Configuration functions                      */
+/******************************************************************************/
+/*******************************************************************************
+* mvEthMruGet - Get MRU configuration for Max Rx packet size.
+*
+* INPUT:
+*           MV_U32 maxRxPktSize - max  packet size.
+*
+* RETURN:   MV_U32 - MRU configuration.
+*
+*******************************************************************************/
+static MV_U32 mvEthMruGet(MV_U32 maxRxPktSize)
+{
+    MV_U32 portSerialCtrlReg = 0;
+
+    if(maxRxPktSize > 9192)
+        portSerialCtrlReg |= ETH_MAX_RX_PACKET_9700BYTE;
+    else if(maxRxPktSize > 9022)
+        portSerialCtrlReg |= ETH_MAX_RX_PACKET_9192BYTE;
+    else if(maxRxPktSize > 1552)
+        portSerialCtrlReg |= ETH_MAX_RX_PACKET_9022BYTE;
+    else if(maxRxPktSize > 1522)
+        portSerialCtrlReg |= ETH_MAX_RX_PACKET_1552BYTE;
+    else if(maxRxPktSize > 1518)
+        portSerialCtrlReg |= ETH_MAX_RX_PACKET_1522BYTE;
+    else
+        portSerialCtrlReg |= ETH_MAX_RX_PACKET_1518BYTE;
+
+    return portSerialCtrlReg;
+}
+
+/*******************************************************************************
+* mvEthRxCoalSet  - Sets coalescing interrupt mechanism on RX path
+*
+* DESCRIPTION:
+*       This routine sets the RX coalescing interrupt mechanism parameter.
+*       This parameter is a timeout counter, that counts in 64 tClk
+*       chunks, that when timeout event occurs a maskable interrupt occurs.
+*       The parameter is calculated using the tCLK frequency of the
+*       MV-64xxx chip, and the required number is in micro seconds.
+*
+* INPUT:
+*       void*           pPortHndl   - Ethernet Port handler.
+*       MV_U32          uSec        - Number of micro seconds between 
+*                                   RX interrupts
+*
+* RETURN:
+*       None.
+*
+* COMMENT:     
+*   1 sec           - TCLK_RATE clocks
+*   1 uSec          - TCLK_RATE / 1,000,000 clocks
+*
+*   Register Value for N micro seconds -  ((N * ( (TCLK_RATE / 1,000,000)) / 64)
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+MV_U32    mvEthRxCoalSet (void* pPortHndl, MV_U32 uSec) 
+{
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+    MV_U32          coal = ((uSec * (mvBoardTclkGet() / 1000000)) / 64);
+    MV_U32          portSdmaCfgReg;
+
+    portSdmaCfgReg =  MV_REG_READ(ETH_SDMA_CONFIG_REG(pPortCtrl->portNo));
+    portSdmaCfgReg &= ~ETH_RX_INTR_COAL_ALL_MASK;
+
+    portSdmaCfgReg |= ETH_RX_INTR_COAL_MASK(coal);
+
+#if (MV_ETH_VERSION >= 2)
+    /* Set additional bit if needed ETH_RX_INTR_COAL_MSB_BIT (25) */
+    if(ETH_RX_INTR_COAL_MASK(coal) > ETH_RX_INTR_COAL_ALL_MASK)
+        portSdmaCfgReg |= ETH_RX_INTR_COAL_MSB_MASK;
+#endif /* MV_ETH_VERSION >= 2 */
+
+    MV_REG_WRITE (ETH_SDMA_CONFIG_REG(pPortCtrl->portNo), portSdmaCfgReg);
+    return coal;
+}
+
+/*******************************************************************************
+* mvEthTxCoalSet - Sets coalescing interrupt mechanism on TX path
+*
+* DESCRIPTION:
+*       This routine sets the TX coalescing interrupt mechanism parameter.
+*       This parameter is a timeout counter, that counts in 64 tClk
+*       chunks, that when timeout event occurs a maskable interrupt
+*       occurs.
+*       The parameter is calculated using the tCLK frequency of the
+*       MV-64xxx chip, and the required number is in micro seconds.
+*
+* INPUT:
+*       void*           pPortHndl    - Ethernet Port handler.
+*       MV_U32          uSec        - Number of micro seconds between 
+*                                   RX interrupts
+*
+* RETURN:
+*       None.
+*
+* COMMENT:     
+*   1 sec           - TCLK_RATE clocks
+*   1 uSec          - TCLK_RATE / 1,000,000 clocks
+*
+*   Register Value for N micro seconds -  ((N * ( (TCLK_RATE / 1,000,000)) / 64)
+*
+*******************************************************************************/
+MV_U32    mvEthTxCoalSet(void* pPortHndl, MV_U32 uSec) 
+{
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+    MV_U32          coal = ((uSec * (mvBoardTclkGet() / 1000000)) / 64);
+    MV_U32          regVal;
+
+    regVal = MV_REG_READ(ETH_TX_FIFO_URGENT_THRESH_REG(pPortCtrl->portNo));
+    regVal &= ~ETH_TX_INTR_COAL_ALL_MASK;
+    regVal |= ETH_TX_INTR_COAL_MASK(coal);
+
+    /* Set TX Coalescing mechanism */
+    MV_REG_WRITE (ETH_TX_FIFO_URGENT_THRESH_REG(pPortCtrl->portNo), regVal); 
+    return coal;
+}
+
+/*******************************************************************************
+* mvEthCoalGet - Gets RX and TX coalescing values in micro seconds
+*
+* DESCRIPTION:
+*       This routine gets the RX and TX coalescing interrupt values.
+*       The parameter is calculated using the tCLK frequency of the
+*       MV-64xxx chip, and the returned numbers are in micro seconds.
+*
+* INPUTs:
+*       void*   pPortHndl   - Ethernet Port handler.
+*
+* OUTPUTs:
+*       MV_U32* pRxCoal     - Number of micro seconds between RX interrupts
+*       MV_U32* pTxCoal     - Number of micro seconds between TX interrupts
+*
+* RETURN:
+*       MV_STATUS   MV_OK  - success
+*                   Others - failure.
+*
+* COMMENT:     
+*   1 sec           - TCLK_RATE clocks
+*   1 uSec          - TCLK_RATE / 1,000,000 clocks
+*
+*   Register Value for N micro seconds -  ((N * ( (TCLK_RATE / 1,000,000)) / 64)
+*
+*******************************************************************************/
+MV_STATUS   mvEthCoalGet(void* pPortHndl, MV_U32* pRxCoal, MV_U32* pTxCoal)
+{
+    MV_U32  regVal, coal, usec;
+
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+
+    /* get TX Coalescing */
+    regVal = MV_REG_READ (ETH_TX_FIFO_URGENT_THRESH_REG(pPortCtrl->portNo));
+    coal = ((regVal & ETH_TX_INTR_COAL_ALL_MASK) >> ETH_TX_INTR_COAL_OFFSET);
+
+    usec = (coal * 64) / (mvBoardTclkGet() / 1000000);
+    if(pTxCoal != NULL)
+        *pTxCoal = usec;
+
+    /* Get RX Coalescing */
+    regVal =  MV_REG_READ(ETH_SDMA_CONFIG_REG(pPortCtrl->portNo));
+    coal = ((regVal & ETH_RX_INTR_COAL_ALL_MASK) >> ETH_RX_INTR_COAL_OFFSET);
+
+#if (MV_ETH_VERSION >= 2)
+    if(regVal & ETH_RX_INTR_COAL_MSB_MASK)
+    {
+        /* Add MSB */
+        coal |= (ETH_RX_INTR_COAL_ALL_MASK + 1);
+    }
+#endif /* MV_ETH_VERSION >= 2 */
+
+    usec = (coal * 64) / (mvBoardTclkGet() / 1000000);
+    if(pRxCoal != NULL)
+        *pRxCoal = usec;
+
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvEthMaxRxSizeSet - 
+*
+* DESCRIPTION:
+*       Change maximum receive size of the port. This configuration will take place 
+*       after next call of ethPortSetDefaults() function.
+*
+* INPUT:
+*
+* RETURN:
+*******************************************************************************/
+MV_STATUS   mvEthMaxRxSizeSet(void* pPortHndl, int maxRxSize)
+{
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+    MV_U32      portSerialCtrlReg;
+
+    if((maxRxSize < 1518) || (maxRxSize & ~ETH_RX_BUFFER_MASK))
+       return MV_BAD_PARAM;
+    
+    pPortCtrl->portConfig.maxRxPktSize = maxRxSize;
+
+    portSerialCtrlReg =  MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(pPortCtrl->portNo));
+    portSerialCtrlReg &= ~ETH_MAX_RX_PACKET_SIZE_MASK;
+    portSerialCtrlReg |= mvEthMruGet(pPortCtrl->portConfig.maxRxPktSize);
+    MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(pPortCtrl->portNo), portSerialCtrlReg);
+
+    return MV_OK;
+}
+
+
+/******************************************************************************/
+/*                      MAC Filtering functions                               */
+/******************************************************************************/
+
+/*******************************************************************************
+* mvEthRxFilterModeSet - Configure Fitering mode of Ethernet port
+*
+* DESCRIPTION:
+*       This routine used to free buffers attached to the Rx ring and should
+*       be called only when Giga Ethernet port is Down
+*
+* INPUT:
+*       void*       pEthPortHndl    - Ethernet Port handler.
+*       MV_BOOL     isPromisc       - Promiscous mode
+*                                   MV_TRUE  - accept all Broadcast, Multicast 
+*                                              and Unicast packets
+*                                   MV_FALSE - accept all Broadcast, 
+*                                              specially added Multicast and
+*                                              single Unicast packets
+*
+* RETURN:   MV_STATUS   MV_OK - Success, Other - Failure
+*
+*******************************************************************************/
+MV_STATUS   mvEthRxFilterModeSet(void* pEthPortHndl, MV_BOOL isPromisc)
+{
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl;
+    int             queue;
+    MV_U32      portCfgReg;
+
+    portCfgReg = MV_REG_READ(ETH_PORT_CONFIG_REG(pPortCtrl->portNo));
+    /* Set / Clear UPM bit in port configuration register */
+    if(isPromisc)
+    {
+        /* Accept all multicast packets to RX default queue */
+        queue = pPortCtrl->portConfig.rxDefQ;
+        portCfgReg |= ETH_UNICAST_PROMISCUOUS_MODE_MASK;
+        memset(pPortCtrl->mcastCount, 1, sizeof(pPortCtrl->mcastCount));
+        MV_REG_WRITE(ETH_MAC_ADDR_LOW_REG(pPortCtrl->portNo),0xFFFF);
+        MV_REG_WRITE(ETH_MAC_ADDR_HIGH_REG(pPortCtrl->portNo),0xFFFFFFFF);
+    }
+    else
+    {
+        /* Reject all Multicast addresses */
+        queue = -1;
+        portCfgReg &= ~ETH_UNICAST_PROMISCUOUS_MODE_MASK;
+        /* Clear all mcastCount */
+        memset(pPortCtrl->mcastCount, 0, sizeof(pPortCtrl->mcastCount));
+    }
+    MV_REG_WRITE(ETH_PORT_CONFIG_REG(pPortCtrl->portNo), portCfgReg);        
+
+    /* Set Special Multicast and Other Multicast tables */
+    mvEthSetSpecialMcastTable(pPortCtrl->portNo, queue);
+    mvEthSetOtherMcastTable(pPortCtrl->portNo, queue);
+    ethSetUcastTable(pPortCtrl->portNo, queue);
+
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvEthMacAddrSet - This function Set the port Unicast address.
+*
+* DESCRIPTION:
+*       This function Set the port Ethernet MAC address. This address
+*       will be used to send Pause frames if enabled. Packets with this
+*       address will be accepted and dispatched to default RX queue
+*
+* INPUT:
+*       void*   pEthPortHndl    - Ethernet port handler.
+*       char*   pAddr           - Address to be set
+*
+* RETURN:   MV_STATUS
+*               MV_OK - Success,  Other - Faulure
+*
+*******************************************************************************/
+MV_STATUS   mvEthMacAddrSet(void* pPortHndl, unsigned char *pAddr, int queue)
+{
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+    unsigned int    macH;
+    unsigned int    macL;
+
+    if(queue >= MV_ETH_RX_Q_NUM)
+    {
+        mvOsPrintf("ethDrv: RX queue #%d is out of range\n", queue);
+        return MV_BAD_PARAM;
+    }
+
+    if(queue != -1)
+    {
+        macL =  (pAddr[4] << 8) | (pAddr[5]);
+        macH =  (pAddr[0] << 24)| (pAddr[1] << 16) |
+                (pAddr[2] << 8) | (pAddr[3] << 0);
+
+        MV_REG_WRITE(ETH_MAC_ADDR_LOW_REG(pPortCtrl->portNo),  macL);
+        MV_REG_WRITE(ETH_MAC_ADDR_HIGH_REG(pPortCtrl->portNo), macH);
+    }
+
+    /* Accept frames of this address */
+    ethSetUcastAddr(pPortCtrl->portNo, pAddr[5], queue);
+
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvEthMacAddrGet - This function returns the port Unicast address.
+*
+* DESCRIPTION:
+*       This function returns the port Ethernet MAC address.
+*
+* INPUT:
+*       int     portNo          - Ethernet port number.
+*       char*   pAddr           - Pointer where address will be written to
+*
+* RETURN:   MV_STATUS
+*               MV_OK - Success,  Other - Faulure
+*
+*******************************************************************************/
+MV_STATUS   mvEthMacAddrGet(int portNo, unsigned char *pAddr)
+{
+    unsigned int    macH;
+    unsigned int    macL;
+
+    if(pAddr == NULL)
+    {
+        mvOsPrintf("mvEthMacAddrGet: NULL pointer.\n");
+        return MV_BAD_PARAM;
+    }
+
+    macH = MV_REG_READ(ETH_MAC_ADDR_HIGH_REG(portNo));
+    macL = MV_REG_READ(ETH_MAC_ADDR_LOW_REG(portNo));
+    pAddr[0] = (macH >> 24) & 0xff;
+    pAddr[1] = (macH >> 16) & 0xff;
+    pAddr[2] = (macH >> 8) & 0xff;
+    pAddr[3] = macH  & 0xff;
+    pAddr[4] = (macL >> 8) & 0xff;
+    pAddr[5] = macL  & 0xff;
+
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvEthMcastCrc8Get - Calculate CRC8 of MAC address.
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       MV_U8*  pAddr           - Address to calculate CRC-8
+*
+* RETURN: MV_U8 - CRC-8 of this MAC address
+*
+*******************************************************************************/
+MV_U8   mvEthMcastCrc8Get(MV_U8* pAddr)
+{
+    unsigned int    macH;
+    unsigned int    macL;
+    int             macArray[48];
+    int             crc[8];
+    int             i;
+    unsigned char   crcResult = 0;
+
+        /* Calculate CRC-8 out of the given address */
+    macH =  (pAddr[0] << 8) | (pAddr[1]);
+    macL =  (pAddr[2] << 24)| (pAddr[3] << 16) |
+            (pAddr[4] << 8) | (pAddr[5] << 0);
+
+    for(i=0; i<32; i++)
+        macArray[i] = (macL >> i) & 0x1;
+
+    for(i=32; i<48; i++)
+        macArray[i] = (macH >> (i - 32)) & 0x1;
+
+    crc[0] = macArray[45] ^ macArray[43] ^ macArray[40] ^ macArray[39] ^
+             macArray[35] ^ macArray[34] ^ macArray[31] ^ macArray[30] ^
+             macArray[28] ^ macArray[23] ^ macArray[21] ^ macArray[19] ^
+             macArray[18] ^ macArray[16] ^ macArray[14] ^ macArray[12] ^
+             macArray[8]  ^ macArray[7]  ^ macArray[6]  ^ macArray[0];
+
+    crc[1] = macArray[46] ^ macArray[45] ^ macArray[44] ^ macArray[43] ^
+             macArray[41] ^ macArray[39] ^ macArray[36] ^ macArray[34] ^
+             macArray[32] ^ macArray[30] ^ macArray[29] ^ macArray[28] ^
+             macArray[24] ^ macArray[23] ^ macArray[22] ^ macArray[21] ^
+             macArray[20] ^ macArray[18] ^ macArray[17] ^ macArray[16] ^
+             macArray[15] ^ macArray[14] ^ macArray[13] ^ macArray[12] ^
+             macArray[9]  ^ macArray[6]  ^ macArray[1]  ^ macArray[0];
+
+    crc[2] = macArray[47] ^ macArray[46] ^ macArray[44] ^ macArray[43] ^
+             macArray[42] ^ macArray[39] ^ macArray[37] ^ macArray[34] ^
+             macArray[33] ^ macArray[29] ^ macArray[28] ^ macArray[25] ^
+             macArray[24] ^ macArray[22] ^ macArray[17] ^ macArray[15] ^
+             macArray[13] ^ macArray[12] ^ macArray[10] ^ macArray[8]  ^
+             macArray[6]  ^ macArray[2]  ^ macArray[1]  ^ macArray[0];
+
+    crc[3] = macArray[47] ^ macArray[45] ^ macArray[44] ^ macArray[43] ^
+             macArray[40] ^ macArray[38] ^ macArray[35] ^ macArray[34] ^
+             macArray[30] ^ macArray[29] ^ macArray[26] ^ macArray[25] ^
+             macArray[23] ^ macArray[18] ^ macArray[16] ^ macArray[14] ^
+             macArray[13] ^ macArray[11] ^ macArray[9]  ^ macArray[7]  ^
+             macArray[3]  ^ macArray[2]  ^ macArray[1];
+
+    crc[4] = macArray[46] ^ macArray[45] ^ macArray[44] ^ macArray[41] ^
+             macArray[39] ^ macArray[36] ^ macArray[35] ^ macArray[31] ^
+             macArray[30] ^ macArray[27] ^ macArray[26] ^ macArray[24] ^
+             macArray[19] ^ macArray[17] ^ macArray[15] ^ macArray[14] ^
+             macArray[12] ^ macArray[10] ^ macArray[8]  ^ macArray[4]  ^
+             macArray[3]  ^ macArray[2];
+
+    crc[5] = macArray[47] ^ macArray[46] ^ macArray[45] ^ macArray[42] ^
+             macArray[40] ^ macArray[37] ^ macArray[36] ^ macArray[32] ^
+             macArray[31] ^ macArray[28] ^ macArray[27] ^ macArray[25] ^
+             macArray[20] ^ macArray[18] ^ macArray[16] ^ macArray[15] ^
+             macArray[13] ^ macArray[11] ^ macArray[9]  ^ macArray[5]  ^
+             macArray[4]  ^ macArray[3];
+
+    crc[6] = macArray[47] ^ macArray[46] ^ macArray[43] ^ macArray[41] ^
+             macArray[38] ^ macArray[37] ^ macArray[33] ^ macArray[32] ^
+             macArray[29] ^ macArray[28] ^ macArray[26] ^ macArray[21] ^
+             macArray[19] ^ macArray[17] ^ macArray[16] ^ macArray[14] ^
+             macArray[12] ^ macArray[10] ^ macArray[6]  ^ macArray[5]  ^
+             macArray[4];
+
+    crc[7] = macArray[47] ^ macArray[44] ^ macArray[42] ^ macArray[39] ^
+             macArray[38] ^ macArray[34] ^ macArray[33] ^ macArray[30] ^
+             macArray[29] ^ macArray[27] ^ macArray[22] ^ macArray[20] ^
+             macArray[18] ^ macArray[17] ^ macArray[15] ^ macArray[13] ^
+             macArray[11] ^ macArray[7]  ^ macArray[6]  ^ macArray[5];
+
+    for(i=0; i<8; i++)
+        crcResult = crcResult | (crc[i] << i);
+
+    return crcResult;
+}
+/*******************************************************************************
+* mvEthMcastAddrSet - Multicast address settings.
+*
+* DESCRIPTION:
+*       This API controls the MV device MAC multicast support.
+*       The MV device supports multicast using two tables:
+*       1) Special Multicast Table for MAC addresses of the form
+*          0x01-00-5E-00-00-XX (where XX is between 0x00 and 0xFF).
+*          The MAC DA[7:0] bits are used as a pointer to the Special Multicast
+*          Table entries in the DA-Filter table.
+*          In this case, the function calls ethPortSmcAddr() routine to set the
+*          Special Multicast Table.
+*       2) Other Multicast Table for multicast of another type. A CRC-8bit
+*          is used as an index to the Other Multicast Table entries in the
+*          DA-Filter table.
+*          In this case, the function calculates the CRC-8bit value and calls
+*          ethPortOmcAddr() routine to set the Other Multicast Table.
+*
+* INPUT:
+*       void*   pEthPortHndl    - Ethernet port handler.
+*       MV_U8*  pAddr           - Address to be set
+*       int     queue           - RX queue to capture all packets with this 
+*                               Multicast MAC address.
+*                               -1 means delete this Multicast address.
+*
+* RETURN: MV_STATUS
+*       MV_TRUE - Success, Other - Failure
+*
+*******************************************************************************/
+MV_STATUS   mvEthMcastAddrSet(void* pPortHndl, MV_U8 *pAddr, int queue)
+{
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+    unsigned char   crcResult = 0;
+
+    if(queue >= MV_ETH_RX_Q_NUM)
+    {
+        mvOsPrintf("ethPort %d: RX queue #%d is out of range\n", 
+                    pPortCtrl->portNo, queue);
+        return MV_BAD_PARAM;
+    }
+
+    if((pAddr[0] == 0x01) &&
+       (pAddr[1] == 0x00) &&
+       (pAddr[2] == 0x5E) &&
+       (pAddr[3] == 0x00) &&
+       (pAddr[4] == 0x00))
+    {
+        ethSetSpecialMcastAddr(pPortCtrl->portNo, pAddr[5], queue);
+    }
+    else
+    {
+        crcResult = mvEthMcastCrc8Get(pAddr);
+
+        /* Check Add counter for this CRC value */
+        if(queue == -1)
+        {
+            if(pPortCtrl->mcastCount[crcResult] == 0)
+            {
+                mvOsPrintf("ethPort #%d: No valid Mcast for crc8=0x%02x\n",
+                            pPortCtrl->portNo, (unsigned)crcResult);
+                return MV_NO_SUCH;
+            }
+
+            pPortCtrl->mcastCount[crcResult]--;
+            if(pPortCtrl->mcastCount[crcResult] != 0)
+            {
+                mvOsPrintf("ethPort #%d: After delete there are %d valid Mcast for crc8=0x%02x\n",
+                            pPortCtrl->portNo, pPortCtrl->mcastCount[crcResult],
+                            (unsigned)crcResult);
+                return MV_NO_CHANGE;
+            }
+        }
+        else
+        {
+            pPortCtrl->mcastCount[crcResult]++;
+            if(pPortCtrl->mcastCount[crcResult] > 1)
+            {
+                mvOsPrintf("ethPort #%d: Valid Mcast for crc8=0x%02x already exists\n",
+                                pPortCtrl->portNo, (unsigned)crcResult);
+                return MV_NO_CHANGE;
+            }
+        }
+        ethSetOtherMcastAddr(pPortCtrl->portNo, crcResult, queue);
+    }
+    return MV_OK;
+}
+
+/*******************************************************************************
+* ethSetUcastTable - Unicast address settings.
+*
+* DESCRIPTION:
+*      Set all entries in the Unicast MAC Table queue==-1 means reject all 
+* INPUT:
+*
+* RETURN: 
+*
+*******************************************************************************/
+static void    ethSetUcastTable(int portNo, int queue)
+{
+    int     offset;
+    MV_U32  regValue;
+
+    if(queue == -1)
+    {
+        regValue = 0;
+    }
+    else
+    {
+        regValue = (((0x01 | (queue<<1)) << 0)  |
+                    ((0x01 | (queue<<1)) << 8)  |
+                    ((0x01 | (queue<<1)) << 16) |
+                    ((0x01 | (queue<<1)) << 24));
+    }
+
+    for (offset=0; offset<=0xC; offset+=4)
+        MV_REG_WRITE((ETH_DA_FILTER_UCAST_BASE(portNo) + offset), regValue);
+}
+
+/*******************************************************************************
+* mvEthSetSpecialMcastTable - Special Multicast address settings.
+*
+* DESCRIPTION:
+*   Set all entries to the Special Multicast MAC Table. queue==-1 means reject all
+* INPUT:
+*
+* RETURN: 
+*
+*******************************************************************************/
+MV_VOID    mvEthSetSpecialMcastTable(int portNo, int queue)
+{
+    int     offset;
+    MV_U32  regValue;
+
+    if(queue == -1)
+    {
+        regValue = 0;
+    }
+    else
+    {
+        regValue = (((0x01 | (queue<<1)) << 0)  |
+                    ((0x01 | (queue<<1)) << 8)  |
+                    ((0x01 | (queue<<1)) << 16) |
+                    ((0x01 | (queue<<1)) << 24));
+    }
+
+    for (offset=0; offset<=0xFC; offset+=4)
+    {
+        MV_REG_WRITE((ETH_DA_FILTER_SPEC_MCAST_BASE(portNo) + 
+                      offset), regValue);
+    }
+}
+
+/*******************************************************************************
+* mvEthSetOtherMcastTable - Other Multicast address settings.
+*
+* DESCRIPTION:
+*   Set all entries to the Other Multicast MAC Table. queue==-1 means reject all
+* INPUT:
+*
+* RETURN: 
+*
+*******************************************************************************/
+MV_VOID    mvEthSetOtherMcastTable(int portNo, int queue)
+{
+    int     offset;
+    MV_U32  regValue;
+
+    if(queue == -1)
+    {
+        regValue = 0;
+    }
+    else
+    {
+        regValue = (((0x01 | (queue<<1)) << 0)  |
+                    ((0x01 | (queue<<1)) << 8)  |
+                    ((0x01 | (queue<<1)) << 16) |
+                    ((0x01 | (queue<<1)) << 24));
+    }
+
+    for (offset=0; offset<=0xFC; offset+=4)
+    {
+        MV_REG_WRITE((ETH_DA_FILTER_OTH_MCAST_BASE(portNo) + 
+                      offset), regValue);
+    }
+}
+
+/*******************************************************************************
+* ethSetUcastAddr - This function Set the port unicast address table
+*
+* DESCRIPTION:
+*       This function locates the proper entry in the Unicast table for the
+*       specified MAC nibble and sets its properties according to function
+*       parameters.
+*
+* INPUT:
+*       int     ethPortNum  - Port number.
+*       MV_U8   lastNibble  - Unicast MAC Address last nibble.
+*       int     queue       - Rx queue number for this MAC address.
+*                           value "-1" means remove address
+*
+* OUTPUT:
+*       This function add/removes MAC addresses from the port unicast address
+*       table.
+*
+* RETURN:
+*       MV_TRUE is output succeeded.
+*       MV_FALSE if option parameter is invalid.
+*
+*******************************************************************************/
+static MV_BOOL ethSetUcastAddr(int portNo, MV_U8 lastNibble, int queue)
+{
+    unsigned int unicastReg;
+    unsigned int tblOffset;
+    unsigned int regOffset;
+
+    /* Locate the Unicast table entry */
+    lastNibble  = (0xf & lastNibble);
+    tblOffset = (lastNibble / 4) * 4; /* Register offset from unicast table base*/
+    regOffset = lastNibble % 4;     /* Entry offset within the above register */
+
+
+    unicastReg = MV_REG_READ( (ETH_DA_FILTER_UCAST_BASE(portNo) + 
+                               tblOffset));
+                 
+
+    if(queue == -1)
+    {
+        /* Clear accepts frame bit at specified unicast DA table entry */
+        unicastReg &= ~(0xFF << (8*regOffset));
+    }
+    else
+    {
+        unicastReg &= ~(0xFF << (8*regOffset));
+        unicastReg |= ((0x01 | (queue<<1)) << (8*regOffset));
+    }
+    MV_REG_WRITE( (ETH_DA_FILTER_UCAST_BASE(portNo) + tblOffset),
+                  unicastReg);
+
+    return MV_TRUE;
+}
+
+/*******************************************************************************
+* ethSetSpecialMcastAddr - Special Multicast address settings.
+*
+* DESCRIPTION:
+*       This routine controls the MV device special MAC multicast support.
+*       The Special Multicast Table for MAC addresses supports MAC of the form
+*       0x01-00-5E-00-00-XX (where XX is between 0x00 and 0xFF).
+*       The MAC DA[7:0] bits are used as a pointer to the Special Multicast
+*       Table entries in the DA-Filter table.
+*       This function set the Special Multicast Table appropriate entry
+*       according to the argument given.
+*
+* INPUT:
+*       int     ethPortNum      Port number.
+*       unsigned char   mcByte      Multicast addr last byte (MAC DA[7:0] bits).
+*       int          queue      Rx queue number for this MAC address.
+*       int             option      0 = Add, 1 = remove address.
+*
+* OUTPUT:
+*       See description.
+*
+* RETURN:
+*       MV_TRUE is output succeeded.
+*       MV_FALSE if option parameter is invalid.
+*
+*******************************************************************************/
+static MV_BOOL ethSetSpecialMcastAddr(int ethPortNum, MV_U8 lastByte, int queue)
+{
+    unsigned int smcTableReg;
+    unsigned int tblOffset;
+    unsigned int regOffset;
+
+    /* Locate the SMC table entry */
+    tblOffset = (lastByte / 4);     /* Register offset from SMC table base    */
+    regOffset = lastByte % 4;       /* Entry offset within the above register */
+
+    smcTableReg = MV_REG_READ((ETH_DA_FILTER_SPEC_MCAST_BASE(ethPortNum) + tblOffset*4));
+    
+    if(queue == -1)
+    {
+        /* Clear accepts frame bit at specified Special DA table entry */
+        smcTableReg &= ~(0xFF << (8 * regOffset));
+    }
+    else
+    {
+        smcTableReg &= ~(0xFF << (8 * regOffset));
+        smcTableReg |= ((0x01 | (queue<<1)) << (8 * regOffset));
+    }
+    MV_REG_WRITE((ETH_DA_FILTER_SPEC_MCAST_BASE(ethPortNum) + 
+                  tblOffset*4), smcTableReg);
+
+    return MV_TRUE;
+}
+
+/*******************************************************************************
+* ethSetOtherMcastAddr - Multicast address settings.
+*
+* DESCRIPTION:
+*       This routine controls the MV device Other MAC multicast support.
+*       The Other Multicast Table is used for multicast of another type.
+*       A CRC-8bit is used as an index to the Other Multicast Table entries
+*       in the DA-Filter table.
+*       The function gets the CRC-8bit value from the calling routine and
+*       set the Other Multicast Table appropriate entry according to the
+*       CRC-8 argument given.
+*
+* INPUT:
+*       int     ethPortNum  Port number.
+*       MV_U8   crc8        A CRC-8bit (Polynomial: x^8+x^2+x^1+1).
+*       int     queue       Rx queue number for this MAC address.
+*
+* OUTPUT:
+*       See description.
+*
+* RETURN:
+*       MV_TRUE is output succeeded.
+*       MV_FALSE if option parameter is invalid.
+*
+*******************************************************************************/
+static MV_BOOL ethSetOtherMcastAddr(int ethPortNum, MV_U8 crc8, int queue)
+{
+    unsigned int omcTableReg;
+    unsigned int tblOffset;
+    unsigned int regOffset;
+
+    /* Locate the OMC table entry */
+    tblOffset = (crc8 / 4) * 4;     /* Register offset from OMC table base    */
+    regOffset = crc8 % 4;           /* Entry offset within the above register */
+
+    omcTableReg = MV_REG_READ(
+        (ETH_DA_FILTER_OTH_MCAST_BASE(ethPortNum) + tblOffset));
+
+    if(queue == -1)
+    {
+        /* Clear accepts frame bit at specified Other DA table entry */
+        omcTableReg &= ~(0xFF << (8 * regOffset));
+    }
+    else
+    {
+        omcTableReg &= ~(0xFF << (8 * regOffset));
+        omcTableReg |= ((0x01 | (queue<<1)) << (8 * regOffset));
+    }
+
+    MV_REG_WRITE((ETH_DA_FILTER_OTH_MCAST_BASE(ethPortNum) + tblOffset), 
+                    omcTableReg);
+
+    return MV_TRUE;
+}
+
+
+/******************************************************************************/
+/*                      MIB Counters functions                                */
+/******************************************************************************/
+
+
+/*******************************************************************************
+* mvEthMibCounterRead - Read a MIB counter
+*
+* DESCRIPTION:
+*       This function reads a MIB counter of a specific ethernet port.
+*       NOTE - Read from ETH_MIB_GOOD_OCTETS_RECEIVED_LOW or 
+*              ETH_MIB_GOOD_OCTETS_SENT_LOW counters will return 64 bits value,
+*              so pHigh32 pointer should not be NULL in this case.
+*
+* INPUT:
+*       int           ethPortNum  - Ethernet Port number.
+*       unsigned int  mibOffset   - MIB counter offset.
+*
+* OUTPUT:
+*       MV_U32*       pHigh32 - pointer to place where 32 most significant bits
+*                             of the counter will be stored.
+*
+* RETURN:
+*       32 low sgnificant bits of MIB counter value.
+*
+*******************************************************************************/
+MV_U32  mvEthMibCounterRead(void* pPortHandle, unsigned int mibOffset, 
+                            MV_U32* pHigh32)
+{
+    int             portNo;
+    MV_U32          valLow32, valHigh32;
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+
+    portNo = pPortCtrl->portNo;
+
+    valLow32 = MV_REG_READ(ETH_MIB_COUNTERS_BASE(portNo) + mibOffset);
+    
+    /* Implement FEr ETH. Erroneous Value when Reading the Upper 32-bits    */
+    /* of a 64-bit MIB Counter.                                             */
+    if( (mibOffset == ETH_MIB_GOOD_OCTETS_RECEIVED_LOW) || 
+        (mibOffset == ETH_MIB_GOOD_OCTETS_SENT_LOW) )
+    {
+        valHigh32 = MV_REG_READ(ETH_MIB_COUNTERS_BASE(portNo) + mibOffset + 4);
+        if(pHigh32 != NULL)
+            *pHigh32 = valHigh32;
+    }
+    return valLow32;
+}
+
+/*******************************************************************************
+* mvEthMibCountersClear - Clear all MIB counters
+*
+* DESCRIPTION:
+*       This function clears all MIB counters
+*
+* INPUT:
+*       int           ethPortNum  - Ethernet Port number.
+*
+*
+* RETURN:   void
+*
+*******************************************************************************/
+void  mvEthMibCountersClear(void* pPortHandle)
+{
+    int             i, portNo;
+    unsigned int    dummy;
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+
+    portNo = pPortCtrl->portNo;
+
+    /* Perform dummy reads from MIB counters */
+    for(i=ETH_MIB_GOOD_OCTETS_RECEIVED_LOW; i<ETH_MIB_LATE_COLLISION; i+=4)
+        dummy = MV_REG_READ((ETH_MIB_COUNTERS_BASE(portNo) + i));
+}
+    
+
+/******************************************************************************/
+/*                        RX Dispatching configuration routines               */
+/******************************************************************************/
+
+int     mvEthTosToRxqGet(void* pPortHandle, int tos)
+{
+    MV_U32          regValue;
+    int             regIdx, regOffs, rxq;
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+
+    if(tos > 0xFF)
+    {
+        mvOsPrintf("eth_%d: tos=0x%x is out of range\n", pPortCtrl->portNo, tos);
+        return -1;
+    }
+    regIdx  = mvOsDivide(tos>>2, 10);
+    regOffs = mvOsReminder(tos>>2, 10);
+    
+    regValue = MV_REG_READ(ETH_DIFF_SERV_PRIO_REG(pPortCtrl->portNo, regIdx) );
+    rxq = (regValue >> (regOffs*3));
+    rxq &= 0x7;
+
+    return rxq;
+}
+
+/*******************************************************************************
+* mvEthTosToRxqSet - Map packets with special TOS value to special RX queue
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       void*   pPortHandle - Pointer to port specific handler;
+*       int     tos         - TOS value in the IP header of the packet
+*       int     rxq         - RX Queue for packets with the configured TOS value
+*                           Negative value (-1) means no special processing for these packets, 
+*                           so they will be processed as regular packets.
+*
+* RETURN:   MV_STATUS
+*******************************************************************************/
+MV_STATUS   mvEthTosToRxqSet(void* pPortHandle, int tos, int rxq)
+{
+    MV_U32          regValue;
+    int             regIdx, regOffs;
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+
+    if( (rxq < 0) || (rxq >= MV_ETH_RX_Q_NUM) )
+    {
+        mvOsPrintf("eth_%d: RX queue #%d is out of range\n", pPortCtrl->portNo, rxq);
+        return MV_BAD_PARAM;
+    }
+    if(tos > 0xFF)
+    {
+        mvOsPrintf("eth_%d: tos=0x%x is out of range\n", pPortCtrl->portNo, tos);
+        return MV_BAD_PARAM;
+    }
+    regIdx  = mvOsDivide(tos>>2, 10);
+    regOffs = mvOsReminder(tos>>2, 10);
+    
+    regValue = MV_REG_READ(ETH_DIFF_SERV_PRIO_REG(pPortCtrl->portNo, regIdx) );
+    regValue &= ~(0x7 << (regOffs*3));
+    regValue |= (rxq << (regOffs*3));
+
+    MV_REG_WRITE(ETH_DIFF_SERV_PRIO_REG(pPortCtrl->portNo, regIdx), regValue);
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvEthVlanPrioRxQueue - Configure RX queue to capture VLAN tagged packets with 
+*                        special priority bits [0-2]
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       void*   pPortHandle - Pointer to port specific handler;
+*       int     bpduQueue   - Special queue to capture VLAN tagged packets with special
+*                           priority.
+*                           Negative value (-1) means no special processing for these packets, 
+*                           so they will be processed as regular packets.
+*
+* RETURN:   MV_STATUS
+*       MV_OK       - Success
+*       MV_FAIL     - Failed. 
+*
+*******************************************************************************/
+MV_STATUS   mvEthVlanPrioRxQueue(void* pPortHandle, int vlanPrio, int vlanPrioQueue)
+{
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+    MV_U32          vlanPrioReg;
+
+    if(vlanPrioQueue >= MV_ETH_RX_Q_NUM)
+    {
+        mvOsPrintf("ethDrv: RX queue #%d is out of range\n", vlanPrioQueue);
+        return MV_BAD_PARAM;
+    }
+    if(vlanPrio >= 8)
+    {
+        mvOsPrintf("ethDrv: vlanPrio=%d is out of range\n", vlanPrio);
+        return MV_BAD_PARAM;
+    }
+  
+    vlanPrioReg = MV_REG_READ(ETH_VLAN_TAG_TO_PRIO_REG(pPortCtrl->portNo));
+    vlanPrioReg &= ~(0x7 << (vlanPrio*3));
+    vlanPrioReg |= (vlanPrioQueue << (vlanPrio*3));
+    MV_REG_WRITE(ETH_VLAN_TAG_TO_PRIO_REG(pPortCtrl->portNo), vlanPrioReg);
+
+    return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvEthBpduRxQueue - Configure RX queue to capture BPDU packets.
+*
+* DESCRIPTION:
+*       This function defines processing of BPDU packets. 
+*   BPDU packets can be accepted and captured to one of RX queues 
+*   or can be processing as regular Multicast packets. 
+*
+* INPUT:
+*       void*   pPortHandle - Pointer to port specific handler;
+*       int     bpduQueue   - Special queue to capture BPDU packets (DA is equal to 
+*                           01-80-C2-00-00-00 through 01-80-C2-00-00-FF, 
+*                           except for the Flow-Control Pause packets). 
+*                           Negative value (-1) means no special processing for BPDU, 
+*                           packets so they will be processed as regular Multicast packets.
+*
+* RETURN:   MV_STATUS
+*       MV_OK       - Success
+*       MV_FAIL     - Failed. 
+*
+*******************************************************************************/
+MV_STATUS   mvEthBpduRxQueue(void* pPortHandle, int bpduQueue)
+{
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+    MV_U32      portCfgReg;
+    MV_U32      portCfgExtReg;
+
+    if(bpduQueue >= MV_ETH_RX_Q_NUM)
+    {
+        mvOsPrintf("ethDrv: RX queue #%d is out of range\n", bpduQueue);
+        return MV_BAD_PARAM;
+    }
+  
+    portCfgExtReg = MV_REG_READ(ETH_PORT_CONFIG_EXTEND_REG(pPortCtrl->portNo));
+
+    portCfgReg = MV_REG_READ(ETH_PORT_CONFIG_REG(pPortCtrl->portNo));
+    if(bpduQueue >= 0)
+    {
+        pPortCtrl->portConfig.rxBpduQ = bpduQueue;
+
+        portCfgReg &= ~ETH_DEF_RX_BPDU_QUEUE_ALL_MASK;
+        portCfgReg |= ETH_DEF_RX_BPDU_QUEUE_MASK(pPortCtrl->portConfig.rxBpduQ);
+
+        MV_REG_WRITE(ETH_PORT_CONFIG_REG(pPortCtrl->portNo), portCfgReg);
+
+        portCfgExtReg |= ETH_CAPTURE_SPAN_BPDU_ENABLE_MASK;
+    }
+    else
+    {
+        pPortCtrl->portConfig.rxBpduQ = -1;
+        /* no special processing for BPDU packets */
+        portCfgExtReg &= (~ETH_CAPTURE_SPAN_BPDU_ENABLE_MASK);
+    }
+
+    MV_REG_WRITE(ETH_PORT_CONFIG_EXTEND_REG(pPortCtrl->portNo),  portCfgExtReg);
+
+    return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvEthArpRxQueue - Configure RX queue to capture ARP packets.
+*
+* DESCRIPTION:
+*       This function defines processing of ARP (type=0x0806) packets. 
+*   ARP packets can be accepted and captured to one of RX queues 
+*   or can be processed as other Broadcast packets. 
+*
+* INPUT:
+*       void*   pPortHandle - Pointer to port specific handler;
+*       int     arpQueue    - Special queue to capture ARP packets (type=0x806). 
+*                           Negative value (-1) means discard ARP packets
+*
+* RETURN:   MV_STATUS
+*       MV_OK       - Success
+*       MV_FAIL     - Failed. 
+*
+*******************************************************************************/
+MV_STATUS   mvEthArpRxQueue(void* pPortHandle, int arpQueue)
+{
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+    MV_U32      portCfgReg;
+
+    if(arpQueue >= MV_ETH_RX_Q_NUM)
+    {
+        mvOsPrintf("ethDrv: RX queue #%d is out of range\n", arpQueue);
+        return MV_BAD_PARAM;
+    }
+
+    portCfgReg = MV_REG_READ(ETH_PORT_CONFIG_REG(pPortCtrl->portNo));
+
+    if(arpQueue >= 0)
+    {
+        pPortCtrl->portConfig.rxArpQ = arpQueue;
+        portCfgReg &= ~ETH_DEF_RX_ARP_QUEUE_ALL_MASK;
+        portCfgReg |= ETH_DEF_RX_ARP_QUEUE_MASK(pPortCtrl->portConfig.rxArpQ);
+
+        portCfgReg &= (~ETH_REJECT_ARP_BCAST_MASK);
+    }
+    else
+    {
+        pPortCtrl->portConfig.rxArpQ = -1;
+        portCfgReg |= ETH_REJECT_ARP_BCAST_MASK;
+    }
+
+    MV_REG_WRITE(ETH_PORT_CONFIG_REG(pPortCtrl->portNo), portCfgReg);
+
+    return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvEthTcpRxQueue - Configure RX queue to capture TCP packets.
+*
+* DESCRIPTION:
+*       This function defines processing of TCP packets. 
+*   TCP packets can be accepted and captured to one of RX queues 
+*   or can be processed as regular Unicast packets. 
+*
+* INPUT:
+*       void*   pPortHandle - Pointer to port specific handler;
+*       int     tcpQueue    - Special queue to capture TCP packets. Value "-1" 
+*                           means no special processing for TCP packets, 
+*                           so they will be processed as regular
+*
+* RETURN:   MV_STATUS
+*       MV_OK       - Success
+*       MV_FAIL     - Failed. 
+*
+*******************************************************************************/
+MV_STATUS   mvEthTcpRxQueue(void* pPortHandle, int tcpQueue)
+{
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+    MV_U32      portCfgReg;
+
+    if(tcpQueue >= MV_ETH_RX_Q_NUM)
+    {
+        mvOsPrintf("ethDrv: RX queue #%d is out of range\n", tcpQueue);
+        return MV_BAD_PARAM;
+    }
+    portCfgReg = MV_REG_READ(ETH_PORT_CONFIG_REG(pPortCtrl->portNo));
+
+    if(tcpQueue >= 0)
+    {
+        pPortCtrl->portConfig.rxTcpQ = tcpQueue;
+        portCfgReg &= ~ETH_DEF_RX_TCP_QUEUE_ALL_MASK;
+        portCfgReg |= ETH_DEF_RX_TCP_QUEUE_MASK(pPortCtrl->portConfig.rxTcpQ);
+
+        portCfgReg |= ETH_CAPTURE_TCP_FRAMES_ENABLE_MASK;
+    }
+    else
+    {
+        pPortCtrl->portConfig.rxTcpQ = -1;
+        portCfgReg &= (~ETH_CAPTURE_TCP_FRAMES_ENABLE_MASK);
+    }
+
+    MV_REG_WRITE(ETH_PORT_CONFIG_REG(pPortCtrl->portNo), portCfgReg);
+
+    return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvEthUdpRxQueue - Configure RX queue to capture UDP packets.
+*
+* DESCRIPTION:
+*       This function defines processing of UDP packets. 
+*   TCP packets can be accepted and captured to one of RX queues 
+*   or can be processed as regular Unicast packets. 
+*
+* INPUT:
+*       void*   pPortHandle - Pointer to port specific handler;
+*       int     udpQueue    - Special queue to capture UDP packets. Value "-1" 
+*                           means no special processing for UDP packets, 
+*                           so they will be processed as regular
+*
+* RETURN:   MV_STATUS
+*       MV_OK       - Success
+*       MV_FAIL     - Failed. 
+*
+*******************************************************************************/
+MV_STATUS   mvEthUdpRxQueue(void* pPortHandle, int udpQueue)
+{
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+    MV_U32          portCfgReg;
+
+    if(udpQueue >= MV_ETH_RX_Q_NUM)
+    {
+        mvOsPrintf("ethDrv: RX queue #%d is out of range\n", udpQueue);
+        return MV_BAD_PARAM;
+    }
+
+    portCfgReg = MV_REG_READ(ETH_PORT_CONFIG_REG(pPortCtrl->portNo));
+
+    if(udpQueue >= 0)
+    {
+        pPortCtrl->portConfig.rxUdpQ = udpQueue;
+        portCfgReg &= ~ETH_DEF_RX_UDP_QUEUE_ALL_MASK;
+        portCfgReg |= ETH_DEF_RX_UDP_QUEUE_MASK(pPortCtrl->portConfig.rxUdpQ);
+
+        portCfgReg |= ETH_CAPTURE_UDP_FRAMES_ENABLE_MASK;        
+    }
+    else
+    {
+        pPortCtrl->portConfig.rxUdpQ = -1;
+        portCfgReg &= ~ETH_CAPTURE_UDP_FRAMES_ENABLE_MASK;
+    }
+
+    MV_REG_WRITE(ETH_PORT_CONFIG_REG(pPortCtrl->portNo), portCfgReg);
+
+    return MV_OK;
+}
+
+
+/******************************************************************************/
+/*                          Speed, Duplex, FlowControl routines               */
+/******************************************************************************/
+
+/*******************************************************************************
+* mvEthSpeedDuplexSet - Set Speed and Duplex of the port.
+*
+* DESCRIPTION:
+*       This function configure the port to work with desirable Duplex and Speed.
+*       Changing of these parameters are allowed only when port is disabled.
+*       This function disable the port if was enabled, change duplex and speed 
+*       and, enable the port back if needed.
+*
+* INPUT:
+*       void*           pPortHandle - Pointer to port specific handler;
+*       ETH_PORT_SPEED  speed       - Speed of the port.
+*       ETH_PORT_SPEED  duplex      - Duplex of the port.
+*
+* RETURN:   MV_STATUS
+*       MV_OK           - Success
+*       MV_OUT_OF_RANGE - Failed. Port is out of valid range
+*       MV_NOT_FOUND    - Failed. Port is not initialized.
+*       MV_BAD_PARAM    - Input parameters (speed/duplex) in conflict.
+*       MV_BAD_VALUE    - Value of one of input parameters (speed, duplex) 
+*                       is not valid
+*
+*******************************************************************************/
+MV_STATUS   mvEthSpeedDuplexSet(void* pPortHandle, MV_ETH_PORT_SPEED speed, 
+                                MV_ETH_PORT_DUPLEX duplex)
+{
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+    int             port = pPortCtrl->portNo;
+    MV_U32      portSerialCtrlReg;
+    
+    if( (port < 0) || (port >= (int)mvCtrlEthMaxPortGet()) )
+        return MV_OUT_OF_RANGE;
+
+    pPortCtrl = ethPortCtrl[port];
+    if(pPortCtrl == NULL)
+        return MV_NOT_FOUND;
+
+    /* Check validity */
+    if( (speed == MV_ETH_SPEED_1000) && (duplex == MV_ETH_DUPLEX_HALF) )
+        return MV_BAD_PARAM;
+
+    portSerialCtrlReg = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(port));
+    /* Set Speed */
+    switch(speed)
+    {
+        case MV_ETH_SPEED_AN:
+            portSerialCtrlReg &= ~ETH_DISABLE_SPEED_AUTO_NEG_MASK;
+            break;
+
+        case MV_ETH_SPEED_10:
+            portSerialCtrlReg |= ETH_DISABLE_SPEED_AUTO_NEG_MASK;
+            portSerialCtrlReg &= ~ETH_SET_GMII_SPEED_1000_MASK;
+            portSerialCtrlReg &= ~ETH_SET_MII_SPEED_100_MASK;
+            break;
+
+        case MV_ETH_SPEED_100:
+            portSerialCtrlReg |= ETH_DISABLE_SPEED_AUTO_NEG_MASK;
+            portSerialCtrlReg &= ~ETH_SET_GMII_SPEED_1000_MASK;
+            portSerialCtrlReg |= ETH_SET_MII_SPEED_100_MASK;
+            break;
+
+        case MV_ETH_SPEED_1000:
+            portSerialCtrlReg |= ETH_DISABLE_SPEED_AUTO_NEG_MASK;
+            portSerialCtrlReg |= ETH_SET_GMII_SPEED_1000_MASK;
+            break;
+
+        default:
+            mvOsPrintf("ethDrv: Unexpected Speed value %d\n", speed);
+            return MV_BAD_VALUE;
+    }
+    /* Set duplex */
+    switch(duplex)
+    {
+        case MV_ETH_DUPLEX_AN:
+            portSerialCtrlReg &= ~ETH_DISABLE_DUPLEX_AUTO_NEG_MASK;
+            break;
+
+        case MV_ETH_DUPLEX_HALF:
+            portSerialCtrlReg |= ETH_DISABLE_DUPLEX_AUTO_NEG_MASK;
+            portSerialCtrlReg &= ~ETH_SET_FULL_DUPLEX_MASK;
+            break;
+
+        case MV_ETH_DUPLEX_FULL:
+            portSerialCtrlReg |= ETH_DISABLE_DUPLEX_AUTO_NEG_MASK;
+            portSerialCtrlReg |= ETH_SET_FULL_DUPLEX_MASK;
+            break;
+
+        default:
+            mvOsPrintf("ethDrv: Unexpected Duplex value %d\n", duplex);
+            return MV_BAD_VALUE;
+    }
+    MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(port), portSerialCtrlReg);
+
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvEthFlowCtrlSet - Set Flow Control of the port.
+*
+* DESCRIPTION:
+*       This function configure the port to work with desirable Duplex and 
+*       Speed. Changing of these parameters are allowed only when port is 
+*       disabled. This function disable the port if was enabled, change 
+*       duplex and speed and, enable the port back if needed.
+*
+* INPUT:
+*       void*           pPortHandle - Pointer to port specific handler;
+*       MV_ETH_PORT_FC  flowControl - Flow control of the port.
+*
+* RETURN:   MV_STATUS
+*       MV_OK           - Success
+*       MV_OUT_OF_RANGE - Failed. Port is out of valid range
+*       MV_NOT_FOUND    - Failed. Port is not initialized.
+*       MV_BAD_VALUE    - Value flowControl parameters is not valid
+*
+*******************************************************************************/
+MV_STATUS   mvEthFlowCtrlSet(void* pPortHandle, MV_ETH_PORT_FC flowControl)
+{
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+    int             port = pPortCtrl->portNo;
+    MV_U32      portSerialCtrlReg;
+    
+    if( (port < 0) || (port >= (int)mvCtrlEthMaxPortGet() ) )
+        return MV_OUT_OF_RANGE;
+
+    pPortCtrl = ethPortCtrl[port];
+    if(pPortCtrl == NULL)
+        return MV_NOT_FOUND;
+
+    portSerialCtrlReg = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(port));
+    switch(flowControl)
+    {
+        case MV_ETH_FC_AN_ADV_DIS:
+            portSerialCtrlReg &= ~ETH_DISABLE_FC_AUTO_NEG_MASK;
+            portSerialCtrlReg &= ~ETH_ADVERTISE_SYM_FC_MASK;
+            break;
+
+        case MV_ETH_FC_AN_ADV_SYM:
+            portSerialCtrlReg &= ~ETH_DISABLE_FC_AUTO_NEG_MASK;
+            portSerialCtrlReg |= ETH_ADVERTISE_SYM_FC_MASK;
+            break;
+
+        case MV_ETH_FC_DISABLE:
+            portSerialCtrlReg |= ETH_DISABLE_FC_AUTO_NEG_MASK;
+            portSerialCtrlReg &= ~ETH_SET_FLOW_CTRL_MASK;
+            break;
+
+        case MV_ETH_FC_ENABLE:
+            portSerialCtrlReg |= ETH_DISABLE_FC_AUTO_NEG_MASK;
+            portSerialCtrlReg |= ETH_SET_FLOW_CTRL_MASK;
+            break;
+
+        default:
+            mvOsPrintf("ethDrv: Unexpected FlowControl value %d\n", flowControl);
+            return MV_BAD_VALUE;
+    }
+    MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(port), portSerialCtrlReg);
+
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvEthHeaderModeSet - Set port header mode.
+*
+* DESCRIPTION:
+*       This function configures the port to work in Marvell-Header mode.
+*
+* INPUT:
+*       void*           pPortHandle - Pointer to port specific handler;
+*       MV_ETH_HEADER_MODE headerMode - The header mode to set the port in.
+*
+* RETURN:   MV_STATUS
+*       MV_OK           - Success
+*       MV_NOT_SUPPORTED- Feature not supported.
+*       MV_OUT_OF_RANGE - Failed. Port is out of valid range
+*       MV_NOT_FOUND    - Failed. Port is not initialized.
+*       MV_BAD_VALUE    - Value of headerMode or numRxQueue parameter is not valid.
+*
+*******************************************************************************/
+MV_STATUS mvEthHeaderModeSet(void* pPortHandle, MV_ETH_HEADER_MODE headerMode)
+{
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+    int             port = pPortCtrl->portNo;
+    MV_U32			mvHeaderReg;
+    MV_U32          numRxQ = MV_ETH_RX_Q_NUM;
+    
+    if((port < 0) || (port >= mvCtrlEthMaxPortGet()))
+        return MV_OUT_OF_RANGE;
+
+    pPortCtrl = ethPortCtrl[port];
+    if(pPortCtrl == NULL)
+        return MV_NOT_FOUND;
+
+    mvHeaderReg = MV_REG_READ(ETH_PORT_MARVELL_HEADER_REG(port));
+    /* Disable header mode.             */
+    mvHeaderReg &= ~ETH_MVHDR_EN_MASK;
+
+    if(headerMode != MV_ETH_DISABLE_HEADER_MODE)
+    {
+        /* Enable Header mode.              */
+        mvHeaderReg |= ETH_MVHDR_EN_MASK;
+
+        /* Clear DA-Prefix  & MHMask fields.*/
+        mvHeaderReg &= ~(ETH_MVHDR_DAPREFIX_MASK | ETH_MVHDR_MHMASK_MASK);
+
+        if(numRxQ > 1)
+        {
+            switch (headerMode)
+            {
+                case(MV_ETH_ENABLE_HEADER_MODE_PRI_2_1):
+                    mvHeaderReg |= ETH_MVHDR_DAPREFIX_PRI_1_2;
+                    break;
+                case(MV_ETH_ENABLE_HEADER_MODE_PRI_DBNUM):
+                    mvHeaderReg |= ETH_MVHDR_DAPREFIX_DBNUM_PRI;
+                    break;
+                case(MV_ETH_ENABLE_HEADER_MODE_PRI_SPID):
+                    mvHeaderReg |= ETH_MVHDR_DAPREFIX_SPID_PRI;
+                    break;
+                default:
+                    break;
+            }
+
+            switch (numRxQ)
+            {
+                case (4):
+                    mvHeaderReg |= ETH_MVHDR_MHMASK_4_QUEUE;
+                    break;
+                case (8):
+                    mvHeaderReg |= ETH_MVHDR_MHMASK_8_QUEUE;
+                    break;
+                default:
+                    break;
+            }
+        }
+    }
+
+    MV_REG_WRITE(ETH_PORT_MARVELL_HEADER_REG(port), mvHeaderReg);
+
+    return MV_OK;
+}
+
+#if (MV_ETH_VERSION >= 4)
+/*******************************************************************************
+* mvEthEjpModeSet - Enable / Disable EJP policy for TX.
+*
+* DESCRIPTION:
+*       This function 
+*
+* INPUT:
+*       void*           pPortHandle - Pointer to port specific handler;
+*       MV_BOOL         TRUE - enable EJP mode
+*                       FALSE - disable EJP mode
+*
+* OUTPUT:   MV_STATUS
+*       MV_OK           - Success
+*       Other           - Failure
+*
+* RETURN:   None.
+*
+*******************************************************************************/
+MV_STATUS    mvEthEjpModeSet(void* pPortHandle, int mode) 
+{
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+    int             port = pPortCtrl->portNo;
+    
+    if((port < 0) || (port >= mvCtrlEthMaxPortGet()))
+        return MV_OUT_OF_RANGE;
+
+    pPortCtrl = ethPortCtrl[port];
+    if(pPortCtrl == NULL)
+        return MV_NOT_FOUND;
+    
+    pPortCtrl->portConfig.ejpMode = mode;
+    if(mode)
+    {
+        /* EJP enabled */
+        MV_REG_WRITE(ETH_TXQ_CMD_1_REG(port), ETH_TX_EJP_ENABLE_MASK);
+    }
+    else
+    {
+        /* EJP disabled */
+        MV_REG_WRITE(ETH_TXQ_CMD_1_REG(port), 0);
+    }
+    mvOsPrintf("eth_%d: EJP %s - ETH_TXQ_CMD_1_REG: 0x%x = 0x%08x\n", 
+        port, mode ? "Enabled" : "Disabled", ETH_TXQ_CMD_1_REG(port), 
+                    MV_REG_READ(ETH_TXQ_CMD_1_REG(port)));
+
+    return MV_OK;
+}
+#endif /* MV_ETH_VERSION >= 4 */
+
+/*******************************************************************************
+* mvEthStatusGet - Get major properties of the port .
+*
+* DESCRIPTION:
+*       This function get major properties of the port (link, speed, duplex, 
+*       flowControl, etc) and return them using the single structure.
+*
+* INPUT:
+*       void*           pPortHandle - Pointer to port specific handler;
+*
+* OUTPUT:
+*       MV_ETH_PORT_STATUS* pStatus - Pointer to structure, were port status 
+*                                   will be placed.
+*
+* RETURN:   None.
+*
+*******************************************************************************/
+void    mvEthStatusGet(void* pPortHandle, MV_ETH_PORT_STATUS* pStatus)
+{
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+    int             port = pPortCtrl->portNo;
+
+    MV_U32  regValue;
+
+    regValue = MV_REG_READ( ETH_PORT_STATUS_REG(port) );
+
+    if(regValue & ETH_GMII_SPEED_1000_MASK)
+        pStatus->speed = MV_ETH_SPEED_1000;
+    else if(regValue & ETH_MII_SPEED_100_MASK)
+        pStatus->speed = MV_ETH_SPEED_100;
+    else
+        pStatus->speed = MV_ETH_SPEED_10;
+
+    if(regValue & ETH_LINK_UP_MASK) 
+        pStatus->isLinkUp = MV_TRUE;
+    else
+        pStatus->isLinkUp = MV_FALSE;
+
+    if(regValue & ETH_FULL_DUPLEX_MASK) 
+        pStatus->duplex = MV_ETH_DUPLEX_FULL; 
+    else
+        pStatus->duplex = MV_ETH_DUPLEX_HALF; 
+
+
+    if(regValue & ETH_ENABLE_RCV_FLOW_CTRL_MASK) 
+        pStatus->flowControl = MV_ETH_FC_ENABLE;
+    else
+        pStatus->flowControl = MV_ETH_FC_DISABLE;
+}
+
+
+/******************************************************************************/
+/*                         PHY Control Functions                              */
+/******************************************************************************/
+
+
+/*******************************************************************************
+* mvEthPhyAddrSet - Set the ethernet port PHY address.
+*
+* DESCRIPTION:
+*       This routine set the ethernet port PHY address according to given
+*       parameter.
+*
+* INPUT:
+*       void*   pPortHandle     - Pointer to port specific handler;
+*       int     phyAddr         - PHY address       
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+void    mvEthPhyAddrSet(void* pPortHandle, int phyAddr)
+{
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+    int             port = pPortCtrl->portNo;
+    unsigned int    regData;
+
+    regData = MV_REG_READ(ETH_PHY_ADDR_REG(port));
+
+    regData &= ~ETH_PHY_ADDR_MASK;
+    regData |=  phyAddr;
+
+    MV_REG_WRITE(ETH_PHY_ADDR_REG(port), regData);
+
+    return;
+}
+
+/*******************************************************************************
+* mvEthPhyAddrGet - Get the ethernet port PHY address.
+*
+* DESCRIPTION:
+*       This routine returns the given ethernet port PHY address.
+*
+* INPUT:
+*       void*   pPortHandle - Pointer to port specific handler;
+*
+*
+* RETURN: int - PHY address.
+*
+*******************************************************************************/
+int     mvEthPhyAddrGet(void* pPortHandle)
+{
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pPortHandle;
+    int             port = pPortCtrl->portNo;
+    unsigned int    regData;
+
+    regData = MV_REG_READ(ETH_PHY_ADDR_REG(port));
+
+    return ((regData >> (5 * port)) & 0x1f);
+}
+
+/******************************************************************************/
+/*                Descriptor handling Functions                               */
+/******************************************************************************/
+
+/*******************************************************************************
+* etherInitRxDescRing - Curve a Rx chain desc list and buffer in memory.
+*
+* DESCRIPTION:
+*       This function prepares a Rx chained list of descriptors and packet
+*       buffers in a form of a ring. The routine must be called after port
+*       initialization routine and before port start routine.
+*       The Ethernet SDMA engine uses CPU bus addresses to access the various
+*       devices in the system (i.e. DRAM). This function uses the ethernet
+*       struct 'virtual to physical' routine (set by the user) to set the ring
+*       with physical addresses.
+*
+* INPUT:
+*       ETH_QUEUE_CTRL  *pEthPortCtrl   Ethernet Port Control srtuct.
+*       int             rxQueue         Number of Rx queue.
+*       int             rxDescNum       Number of Rx descriptors
+*       MV_U8*          rxDescBaseAddr  Rx descriptors memory area base addr.
+*
+* OUTPUT:
+*       The routine updates the Ethernet port control struct with information
+*       regarding the Rx descriptors and buffers.
+*
+* RETURN: None
+*
+*******************************************************************************/
+static void ethInitRxDescRing(ETH_PORT_CTRL* pPortCtrl, int queue)
+{
+    ETH_RX_DESC     *pRxDescBase, *pRxDesc, *pRxPrevDesc; 
+    int             ix, rxDescNum = pPortCtrl->rxQueueConfig[queue].descrNum;
+    ETH_QUEUE_CTRL  *pQueueCtrl = &pPortCtrl->rxQueue[queue];
+
+    /* Make sure descriptor address is cache line size aligned  */        
+    pRxDescBase = (ETH_RX_DESC*)MV_ALIGN_UP((MV_ULONG)pQueueCtrl->descBuf.bufVirtPtr,
+                                     CPU_D_CACHE_LINE_SIZE);
+
+    pRxDesc      = (ETH_RX_DESC*)pRxDescBase;
+    pRxPrevDesc  = pRxDesc;
+
+    /* initialize the Rx descriptors ring */
+    for (ix=0; ix<rxDescNum; ix++)
+    {
+        pRxDesc->bufSize     = 0x0;
+        pRxDesc->byteCnt     = 0x0;
+        pRxDesc->cmdSts      = ETH_BUFFER_OWNED_BY_HOST;
+        pRxDesc->bufPtr      = 0x0;
+        pRxDesc->returnInfo  = 0x0;
+        pRxPrevDesc = pRxDesc;
+        if(ix == (rxDescNum-1))
+        {
+            /* Closing Rx descriptors ring */
+            pRxPrevDesc->nextDescPtr = (MV_U32)ethDescVirtToPhy(pQueueCtrl, (void*)pRxDescBase);
+        }
+        else
+        {
+            pRxDesc = (ETH_RX_DESC*)((MV_ULONG)pRxDesc + ETH_RX_DESC_ALIGNED_SIZE);
+            pRxPrevDesc->nextDescPtr = (MV_U32)ethDescVirtToPhy(pQueueCtrl, (void*)pRxDesc);
+        }
+        ETH_DESCR_FLUSH_INV(pPortCtrl, pRxPrevDesc);
+    }
+
+    pQueueCtrl->pCurrentDescr = pRxDescBase;
+    pQueueCtrl->pUsedDescr = pRxDescBase;
+    
+    pQueueCtrl->pFirstDescr = pRxDescBase;
+    pQueueCtrl->pLastDescr = pRxDesc;
+    pQueueCtrl->resource = 0;
+}
+
+void ethResetRxDescRing(void* pPortHndl, int queue)
+{
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+    ETH_QUEUE_CTRL* pQueueCtrl = &pPortCtrl->rxQueue[queue];
+    ETH_RX_DESC*    pRxDesc = (ETH_RX_DESC*)pQueueCtrl->pFirstDescr;
+
+    pQueueCtrl->resource = 0;
+    if(pQueueCtrl->pFirstDescr != NULL)
+    {
+        while(MV_TRUE)
+        {
+            pRxDesc->bufSize     = 0x0;
+            pRxDesc->byteCnt     = 0x0;
+            pRxDesc->cmdSts      = ETH_BUFFER_OWNED_BY_HOST;
+            pRxDesc->bufPtr      = 0x0;
+            pRxDesc->returnInfo  = 0x0;
+            ETH_DESCR_FLUSH_INV(pPortCtrl, pRxDesc);
+            if( (void*)pRxDesc == pQueueCtrl->pLastDescr)
+                    break;
+            pRxDesc = RX_NEXT_DESC_PTR(pRxDesc, pQueueCtrl);
+        }
+        pQueueCtrl->pCurrentDescr = pQueueCtrl->pFirstDescr;
+        pQueueCtrl->pUsedDescr = pQueueCtrl->pFirstDescr;
+
+        /* Update RX Command register */
+        pPortCtrl->portRxQueueCmdReg |= (1 << queue);
+
+        /* update HW */
+        MV_REG_WRITE( ETH_RX_CUR_DESC_PTR_REG(pPortCtrl->portNo, queue),
+                 (MV_U32)ethDescVirtToPhy(pQueueCtrl, pQueueCtrl->pCurrentDescr) );
+    }
+    else
+    {
+        /* Update RX Command register */
+        pPortCtrl->portRxQueueCmdReg &= ~(1 << queue);
+
+        /* update HW */
+        MV_REG_WRITE( ETH_RX_CUR_DESC_PTR_REG(pPortCtrl->portNo, queue), 0);
+    }
+}
+
+/*******************************************************************************
+* etherInitTxDescRing - Curve a Tx chain desc list and buffer in memory.
+*
+* DESCRIPTION:
+*       This function prepares a Tx chained list of descriptors and packet
+*       buffers in a form of a ring. The routine must be called after port
+*       initialization routine and before port start routine.
+*       The Ethernet SDMA engine uses CPU bus addresses to access the various
+*       devices in the system (i.e. DRAM). This function uses the ethernet
+*       struct 'virtual to physical' routine (set by the user) to set the ring
+*       with physical addresses.
+*
+* INPUT:
+*       ETH_PORT_CTRL   *pEthPortCtrl   Ethernet Port Control srtuct.
+*       int             txQueue         Number of Tx queue.
+*       int             txDescNum       Number of Tx descriptors
+*       int             txBuffSize      Size of Tx buffer
+*       MV_U8*          pTxDescBase     Tx descriptors memory area base addr.
+*
+* OUTPUT:
+*       The routine updates the Ethernet port control struct with information
+*       regarding the Tx descriptors and buffers.
+*
+* RETURN:   None.
+*
+*******************************************************************************/
+static void ethInitTxDescRing(ETH_PORT_CTRL* pPortCtrl, int queue)
+{
+    ETH_TX_DESC     *pTxDescBase, *pTxDesc, *pTxPrevDesc; 
+    int             ix, txDescNum = pPortCtrl->txQueueConfig[queue].descrNum;
+    ETH_QUEUE_CTRL  *pQueueCtrl = &pPortCtrl->txQueue[queue];
+
+    /* Make sure descriptor address is cache line size aligned  */
+    pTxDescBase = (ETH_TX_DESC*)MV_ALIGN_UP((MV_ULONG)pQueueCtrl->descBuf.bufVirtPtr, 
+                                     CPU_D_CACHE_LINE_SIZE);
+
+    pTxDesc      = (ETH_TX_DESC*)pTxDescBase;
+    pTxPrevDesc  = pTxDesc;
+
+    /* initialize the Tx descriptors ring */
+    for (ix=0; ix<txDescNum; ix++)
+    {
+        pTxDesc->byteCnt     = 0x0000;
+        pTxDesc->L4iChk      = 0x0000;
+        pTxDesc->cmdSts      = ETH_BUFFER_OWNED_BY_HOST;
+        pTxDesc->bufPtr      = 0x0;
+        pTxDesc->returnInfo  = 0x0;
+
+        pTxPrevDesc = pTxDesc;
+
+        if(ix == (txDescNum-1))
+        {
+            /* Closing Tx descriptors ring */
+            pTxPrevDesc->nextDescPtr = (MV_U32)ethDescVirtToPhy(pQueueCtrl, (void*)pTxDescBase);
+        }
+        else
+        {
+            pTxDesc = (ETH_TX_DESC*)((MV_ULONG)pTxDesc + ETH_TX_DESC_ALIGNED_SIZE);
+            pTxPrevDesc->nextDescPtr = (MV_U32)ethDescVirtToPhy(pQueueCtrl, (void*)pTxDesc);
+        }
+        ETH_DESCR_FLUSH_INV(pPortCtrl, pTxPrevDesc);
+    }
+
+    pQueueCtrl->pCurrentDescr = pTxDescBase;
+    pQueueCtrl->pUsedDescr = pTxDescBase;
+    
+    pQueueCtrl->pFirstDescr = pTxDescBase;
+    pQueueCtrl->pLastDescr = pTxDesc;
+    /* Leave one TX descriptor out of use */
+    pQueueCtrl->resource = txDescNum - 1;
+}
+
+void ethResetTxDescRing(void* pPortHndl, int queue)
+{
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+    ETH_QUEUE_CTRL* pQueueCtrl = &pPortCtrl->txQueue[queue];
+    ETH_TX_DESC*    pTxDesc = (ETH_TX_DESC*)pQueueCtrl->pFirstDescr;
+    
+    pQueueCtrl->resource = 0;
+    if(pQueueCtrl->pFirstDescr != NULL)
+    {
+        while(MV_TRUE)
+        {
+            pTxDesc->byteCnt     = 0x0000;
+            pTxDesc->L4iChk      = 0x0000;
+            pTxDesc->cmdSts      = ETH_BUFFER_OWNED_BY_HOST;
+            pTxDesc->bufPtr      = 0x0;
+            pTxDesc->returnInfo  = 0x0;
+            ETH_DESCR_FLUSH_INV(pPortCtrl, pTxDesc);
+            pQueueCtrl->resource++;
+            if( (void*)pTxDesc == pQueueCtrl->pLastDescr)
+                    break;
+            pTxDesc = TX_NEXT_DESC_PTR(pTxDesc, pQueueCtrl);
+        }
+        /* Leave one TX descriptor out of use */
+        pQueueCtrl->resource--;
+        pQueueCtrl->pCurrentDescr = pQueueCtrl->pFirstDescr;
+        pQueueCtrl->pUsedDescr = pQueueCtrl->pFirstDescr;
+
+        /* Update TX Command register */
+        pPortCtrl->portTxQueueCmdReg |= MV_32BIT_LE_FAST(1 << queue);
+        /* update HW */
+        MV_REG_WRITE( ETH_TX_CUR_DESC_PTR_REG(pPortCtrl->portNo, queue),
+        (MV_U32)ethDescVirtToPhy(pQueueCtrl, pQueueCtrl->pCurrentDescr) );
+    }
+    else
+    {
+        /* Update TX Command register */
+        pPortCtrl->portTxQueueCmdReg &=  MV_32BIT_LE_FAST(~(1 << queue));
+        /* update HW */
+        MV_REG_WRITE( ETH_TX_CUR_DESC_PTR_REG(pPortCtrl->portNo, queue), 0 );    
+    }
+}
+
+/*******************************************************************************
+* ethAllocDescrMemory - Free memory allocated for RX and TX descriptors.
+*
+* DESCRIPTION:
+*       This function allocates memory for RX and TX descriptors.
+*       - If ETH_DESCR_IN_SRAM defined, allocate memory from SRAM.
+*       - If ETH_DESCR_IN_SDRAM defined, allocate memory in SDRAM.
+*
+* INPUT:
+*       int size - size of memory should be allocated.
+*
+* RETURN: None
+*
+*******************************************************************************/
+static MV_U8*  ethAllocDescrMemory(ETH_PORT_CTRL* pPortCtrl, int descSize, 
+                            MV_ULONG* pPhysAddr, MV_U32 *memHandle)
+{
+    MV_U8*  pVirt;
+
+#if defined(ETH_DESCR_IN_SRAM)
+    if(ethDescInSram == MV_TRUE)
+        pVirt = (char*)mvSramMalloc(descSize, pPhysAddr);
+    else
+#endif /* ETH_DESCR_IN_SRAM */
+    {
+#ifdef ETH_DESCR_UNCACHED
+        pVirt = (MV_U8*)mvOsIoUncachedMalloc(pPortCtrl->osHandle, descSize,
+					    pPhysAddr,memHandle);
+#else
+        pVirt = (MV_U8*)mvOsIoCachedMalloc(pPortCtrl->osHandle, descSize,
+					  pPhysAddr, memHandle);
+#endif /* ETH_DESCR_UNCACHED */
+    }
+    memset(pVirt, 0, descSize);
+
+    return pVirt;
+}
+
+/*******************************************************************************
+* ethFreeDescrMemory - Free memory allocated for RX and TX descriptors.
+*
+* DESCRIPTION:
+*       This function frees memory allocated for RX and TX descriptors.
+*       - If ETH_DESCR_IN_SRAM defined, free memory using gtSramFree() function.
+*       - If ETH_DESCR_IN_SDRAM defined, free memory using mvOsFree() function.
+*
+* INPUT:
+*       void* pVirtAddr - virtual pointer to memory allocated for RX and TX
+*                       desriptors.        
+*
+* RETURN: None
+*
+*******************************************************************************/
+void    ethFreeDescrMemory(ETH_PORT_CTRL* pPortCtrl, MV_BUF_INFO* pDescBuf)
+{
+    if( (pDescBuf == NULL) || (pDescBuf->bufVirtPtr == NULL) )
+        return;
+
+#if defined(ETH_DESCR_IN_SRAM)
+    if( ethDescInSram )
+    {
+        mvSramFree(pDescBuf->bufSize, pDescBuf->bufPhysAddr, pDescBuf->bufVirtPtr);
+        return;
+    }
+#endif /* ETH_DESCR_IN_SRAM */
+
+#ifdef ETH_DESCR_UNCACHED
+    mvOsIoUncachedFree(pPortCtrl->osHandle, pDescBuf->bufSize, pDescBuf->bufPhysAddr, 
+                     pDescBuf->bufVirtPtr,pDescBuf->memHandle);
+#else
+    mvOsIoCachedFree(pPortCtrl->osHandle, pDescBuf->bufSize, pDescBuf->bufPhysAddr, 
+                     pDescBuf->bufVirtPtr,pDescBuf->memHandle);
+#endif /* ETH_DESCR_UNCACHED */
+}
+                                                                                                                             
+/******************************************************************************/
+/*                Other Functions                                         */
+/******************************************************************************/
+
+void mvEthPortPowerUp(int port)
+{
+    MV_U32  regVal;
+
+    /* MAC Cause register should be cleared */
+    MV_REG_WRITE(ETH_UNIT_INTR_CAUSE_REG(port), 0);
+
+	if (mvBoardIsPortInSgmii(port))
+    mvEthPortSgmiiConfig(port);
+
+    /* Cancel Port Reset */
+    regVal = MV_REG_READ(ETH_PORT_SERIAL_CTRL_1_REG(port));
+    regVal &= (~ETH_PORT_RESET_MASK);
+    MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_1_REG(port), regVal);
+    while( (MV_REG_READ(ETH_PORT_SERIAL_CTRL_1_REG(port)) & ETH_PORT_RESET_MASK) != 0);
+}
+
+void mvEthPortPowerDown(int port)
+{
+    MV_U32  regVal;
+
+    /* Port must be DISABLED */
+    regVal = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(port));
+    if( (regVal & ETH_PORT_ENABLE_MASK) != 0)
+    {
+        mvOsPrintf("ethPort #%d: PowerDown - port must be Disabled (PSC=0x%x)\n",
+                    port, regVal);
+        return;
+    }
+
+    /* Port Reset (Read after write the register as a precaution) */
+    regVal = MV_REG_READ(ETH_PORT_SERIAL_CTRL_1_REG(port));
+    MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_1_REG(port), regVal | ETH_PORT_RESET_MASK);
+    while((MV_REG_READ(ETH_PORT_SERIAL_CTRL_1_REG(port)) & ETH_PORT_RESET_MASK) == 0);
+}
+
+static void mvEthPortSgmiiConfig(int port)
+{
+    MV_U32  regVal;
+
+    regVal = MV_REG_READ(ETH_PORT_SERIAL_CTRL_1_REG(port));
+
+    regVal |= (ETH_SGMII_MODE_MASK /*| ETH_INBAND_AUTO_NEG_ENABLE_MASK */);
+    regVal &= (~ETH_INBAND_AUTO_NEG_BYPASS_MASK);
+
+    MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_1_REG(port), regVal);
+}
+
+
+
+
+
+
+
+
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthDebug.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthDebug.c
new file mode 100644
index 0000000000..eabac5ad93
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthDebug.c
@@ -0,0 +1,748 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+        this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+/*******************************************************************************
+* mvEthDebug.c - Source file for user friendly debug functions
+*
+* DESCRIPTION:
+*
+* DEPENDENCIES:
+*       None.
+*
+*******************************************************************************/
+
+#include "mvOs.h"
+#include "mvCommon.h"
+#include "mvTypes.h"
+#include "mv802_3.h"
+#include "mvDebug.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "eth-phy/mvEthPhy.h"
+#include "eth/mvEth.h"
+#include "eth/gbe/mvEthDebug.h"
+
+/* #define mvOsPrintf printf */
+
+void    mvEthPortShow(void* pHndl);
+void    mvEthQueuesShow(void* pHndl, int rxQueue, int txQueue, int mode);
+
+/******************************************************************************/
+/*                          Debug functions                                   */
+/******************************************************************************/
+void    ethRxCoal(int port, int usec)
+{
+    void*   pHndl;
+
+    pHndl = mvEthPortHndlGet(port);
+    if(pHndl != NULL)
+    {
+        mvEthRxCoalSet(pHndl, usec);
+    }
+}
+
+void    ethTxCoal(int port, int usec)
+{
+    void*   pHndl;
+
+    pHndl = mvEthPortHndlGet(port);
+    if(pHndl != NULL)
+    {
+        mvEthTxCoalSet(pHndl, usec);
+    }
+}
+
+#if (MV_ETH_VERSION >= 4)
+void     ethEjpModeSet(int port, int mode)
+{
+    void*   pHndl;
+
+    pHndl = mvEthPortHndlGet(port);
+    if(pHndl != NULL)
+    {
+        mvEthEjpModeSet(pHndl, mode);
+    }
+}
+#endif /* (MV_ETH_VERSION >= 4) */
+
+void    ethBpduRxQ(int port, int bpduQueue)
+{
+    void*   pHndl;
+
+    pHndl = mvEthPortHndlGet(port);
+    if(pHndl != NULL)
+    {
+        mvEthBpduRxQueue(pHndl, bpduQueue);
+    }
+}
+
+void    ethArpRxQ(int port, int arpQueue)
+{
+    void*   pHndl;
+
+    pHndl = mvEthPortHndlGet(port);
+    if(pHndl != NULL)
+    {
+        mvEthArpRxQueue(pHndl, arpQueue);
+    }
+}
+
+void    ethTcpRxQ(int port, int tcpQueue)
+{
+    void*   pHndl;
+
+    pHndl = mvEthPortHndlGet(port);
+    if(pHndl != NULL)
+    {
+        mvEthTcpRxQueue(pHndl, tcpQueue);
+    }
+}
+
+void    ethUdpRxQ(int port, int udpQueue)
+{
+    void*   pHndl;
+
+    pHndl = mvEthPortHndlGet(port);
+    if(pHndl != NULL)
+    {
+        mvEthUdpRxQueue(pHndl, udpQueue);
+    }
+}
+
+void    ethTxPolicyRegs(int port)
+{
+    int             queue;
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)mvEthPortHndlGet(port);
+
+    if(pPortCtrl == NULL) 
+    {
+        return;
+    }
+    mvOsPrintf("Port #%d TX Policy: EJP=%d, TXQs: ", 
+                port, pPortCtrl->portConfig.ejpMode);
+    for(queue=0; queue<MV_ETH_TX_Q_NUM; queue++)
+    {
+        if(pPortCtrl->txQueueConfig[queue].descrNum > 0)
+            mvOsPrintf("%d, ", queue);
+    }
+    mvOsPrintf("\n");
+
+    mvOsPrintf("\n\t TX policy Port #%d configuration registers\n", port);
+
+    mvOsPrintf("ETH_TX_QUEUE_COMMAND_REG            : 0x%X = 0x%08x\n", 
+                ETH_TX_QUEUE_COMMAND_REG(port), 
+                MV_REG_READ( ETH_TX_QUEUE_COMMAND_REG(port) ) );    
+    
+    mvOsPrintf("ETH_TX_FIXED_PRIO_CFG_REG           : 0x%X = 0x%08x\n", 
+                ETH_TX_FIXED_PRIO_CFG_REG(port), 
+                MV_REG_READ( ETH_TX_FIXED_PRIO_CFG_REG(port) ) );
+
+    mvOsPrintf("ETH_TX_TOKEN_RATE_CFG_REG           : 0x%X = 0x%08x\n", 
+                ETH_TX_TOKEN_RATE_CFG_REG(port), 
+                MV_REG_READ( ETH_TX_TOKEN_RATE_CFG_REG(port) ) );
+
+    mvOsPrintf("ETH_MAX_TRANSMIT_UNIT_REG           : 0x%X = 0x%08x\n", 
+                ETH_MAX_TRANSMIT_UNIT_REG(port), 
+                MV_REG_READ( ETH_MAX_TRANSMIT_UNIT_REG(port) ) );
+
+    mvOsPrintf("ETH_TX_TOKEN_BUCKET_SIZE_REG        : 0x%X = 0x%08x\n", 
+                ETH_TX_TOKEN_BUCKET_SIZE_REG(port), 
+                MV_REG_READ( ETH_TX_TOKEN_BUCKET_SIZE_REG(port) ) );
+
+    mvOsPrintf("ETH_TX_TOKEN_BUCKET_COUNT_REG       : 0x%X = 0x%08x\n", 
+                ETH_TX_TOKEN_BUCKET_COUNT_REG(port), 
+                MV_REG_READ( ETH_TX_TOKEN_BUCKET_COUNT_REG(port) ) );
+
+    for(queue=0; queue<MV_ETH_MAX_TXQ; queue++)
+    {
+        mvOsPrintf("\n\t TX policy Port #%d, Queue #%d configuration registers\n", port, queue);
+
+        mvOsPrintf("ETH_TXQ_TOKEN_COUNT_REG             : 0x%X = 0x%08x\n", 
+                ETH_TXQ_TOKEN_COUNT_REG(port, queue), 
+                MV_REG_READ( ETH_TXQ_TOKEN_COUNT_REG(port, queue) ) );
+
+        mvOsPrintf("ETH_TXQ_TOKEN_CFG_REG               : 0x%X = 0x%08x\n", 
+                ETH_TXQ_TOKEN_CFG_REG(port, queue), 
+                MV_REG_READ( ETH_TXQ_TOKEN_CFG_REG(port, queue) ) );
+
+        mvOsPrintf("ETH_TXQ_ARBITER_CFG_REG             : 0x%X = 0x%08x\n", 
+                ETH_TXQ_ARBITER_CFG_REG(port, queue), 
+                MV_REG_READ( ETH_TXQ_ARBITER_CFG_REG(port, queue) ) );
+    }
+    mvOsPrintf("\n");
+}
+
+/* Print important registers of Ethernet port */
+void    ethPortRegs(int port)
+{
+    mvOsPrintf("\n\t ethGiga #%d port Registers:\n", port);
+
+    mvOsPrintf("ETH_PORT_STATUS_REG                 : 0x%X = 0x%08x\n", 
+                ETH_PORT_STATUS_REG(port), 
+                MV_REG_READ( ETH_PORT_STATUS_REG(port) ) );
+
+    mvOsPrintf("ETH_PORT_SERIAL_CTRL_REG            : 0x%X = 0x%08x\n", 
+                ETH_PORT_SERIAL_CTRL_REG(port), 
+                MV_REG_READ( ETH_PORT_SERIAL_CTRL_REG(port) ) );
+
+    mvOsPrintf("ETH_PORT_CONFIG_REG                 : 0x%X = 0x%08x\n", 
+                ETH_PORT_CONFIG_REG(port), 
+                MV_REG_READ( ETH_PORT_CONFIG_REG(port) ) );    
+
+    mvOsPrintf("ETH_PORT_CONFIG_EXTEND_REG          : 0x%X = 0x%08x\n", 
+                ETH_PORT_CONFIG_EXTEND_REG(port), 
+                MV_REG_READ( ETH_PORT_CONFIG_EXTEND_REG(port) ) );    
+
+    mvOsPrintf("ETH_SDMA_CONFIG_REG                 : 0x%X = 0x%08x\n", 
+                ETH_SDMA_CONFIG_REG(port), 
+                MV_REG_READ( ETH_SDMA_CONFIG_REG(port) ) );    
+
+    mvOsPrintf("ETH_TX_FIFO_URGENT_THRESH_REG       : 0x%X = 0x%08x\n", 
+                ETH_TX_FIFO_URGENT_THRESH_REG(port), 
+                MV_REG_READ( ETH_TX_FIFO_URGENT_THRESH_REG(port) ) );    
+
+    mvOsPrintf("ETH_RX_QUEUE_COMMAND_REG            : 0x%X = 0x%08x\n", 
+                ETH_RX_QUEUE_COMMAND_REG(port), 
+                MV_REG_READ( ETH_RX_QUEUE_COMMAND_REG(port) ) );    
+
+    mvOsPrintf("ETH_TX_QUEUE_COMMAND_REG            : 0x%X = 0x%08x\n", 
+                ETH_TX_QUEUE_COMMAND_REG(port), 
+                MV_REG_READ( ETH_TX_QUEUE_COMMAND_REG(port) ) );    
+
+    mvOsPrintf("ETH_INTR_CAUSE_REG                  : 0x%X = 0x%08x\n", 
+                ETH_INTR_CAUSE_REG(port), 
+                MV_REG_READ( ETH_INTR_CAUSE_REG(port) ) );    
+
+    mvOsPrintf("ETH_INTR_EXTEND_CAUSE_REG           : 0x%X = 0x%08x\n", 
+                ETH_INTR_CAUSE_EXT_REG(port), 
+                MV_REG_READ( ETH_INTR_CAUSE_EXT_REG(port) ) );    
+
+    mvOsPrintf("ETH_INTR_MASK_REG                   : 0x%X = 0x%08x\n", 
+                ETH_INTR_MASK_REG(port), 
+                MV_REG_READ( ETH_INTR_MASK_REG(port) ) );    
+
+    mvOsPrintf("ETH_INTR_EXTEND_MASK_REG            : 0x%X = 0x%08x\n", 
+                ETH_INTR_MASK_EXT_REG(port), 
+                MV_REG_READ( ETH_INTR_MASK_EXT_REG(port) ) );    
+
+    mvOsPrintf("ETH_RX_DESCR_STAT_CMD_REG           : 0x%X = 0x%08x\n", 
+                ETH_RX_DESCR_STAT_CMD_REG(port, 0), 
+                MV_REG_READ( ETH_RX_DESCR_STAT_CMD_REG(port, 0) ) );    
+
+    mvOsPrintf("ETH_RX_BYTE_COUNT_REG               : 0x%X = 0x%08x\n", 
+                ETH_RX_BYTE_COUNT_REG(port, 0), 
+                MV_REG_READ( ETH_RX_BYTE_COUNT_REG(port, 0) ) );    
+
+    mvOsPrintf("ETH_RX_BUF_PTR_REG                  : 0x%X = 0x%08x\n", 
+                ETH_RX_BUF_PTR_REG(port, 0), 
+                MV_REG_READ( ETH_RX_BUF_PTR_REG(port, 0) ) );    
+
+    mvOsPrintf("ETH_RX_CUR_DESC_PTR_REG             : 0x%X = 0x%08x\n", 
+                ETH_RX_CUR_DESC_PTR_REG(port, 0), 
+                MV_REG_READ( ETH_RX_CUR_DESC_PTR_REG(port, 0) ) );    
+}
+
+
+/* Print Giga Ethernet UNIT registers */
+void    ethRegs(int port)
+{
+    mvOsPrintf("ETH_PHY_ADDR_REG               : 0x%X = 0x%08x\n", 
+                ETH_PHY_ADDR_REG(port), 
+                MV_REG_READ(ETH_PHY_ADDR_REG(port)) );    
+
+    mvOsPrintf("ETH_UNIT_INTR_CAUSE_REG        : 0x%X = 0x%08x\n", 
+                ETH_UNIT_INTR_CAUSE_REG(port), 
+                MV_REG_READ( ETH_UNIT_INTR_CAUSE_REG(port)) );    
+
+    mvOsPrintf("ETH_UNIT_INTR_MASK_REG         : 0x%X = 0x%08x\n", 
+                ETH_UNIT_INTR_MASK_REG(port), 
+                MV_REG_READ( ETH_UNIT_INTR_MASK_REG(port)) );    
+
+    mvOsPrintf("ETH_UNIT_ERROR_ADDR_REG        : 0x%X = 0x%08x\n", 
+                ETH_UNIT_ERROR_ADDR_REG(port), 
+                MV_REG_READ(ETH_UNIT_ERROR_ADDR_REG(port)) );    
+
+    mvOsPrintf("ETH_UNIT_INT_ADDR_ERROR_REG    : 0x%X = 0x%08x\n", 
+                ETH_UNIT_INT_ADDR_ERROR_REG(port), 
+                MV_REG_READ(ETH_UNIT_INT_ADDR_ERROR_REG(port)) );    
+    
+}
+
+/******************************************************************************/
+/*                      MIB Counters functions                                */
+/******************************************************************************/
+
+/*******************************************************************************
+* ethClearMibCounters - Clear all MIB counters
+*
+* DESCRIPTION:
+*       This function clears all MIB counters of a specific ethernet port.
+*       A read from the MIB counter will reset the counter.
+*
+* INPUT:
+*       int    port -  Ethernet Port number.
+*
+* RETURN: None
+*
+*******************************************************************************/
+void ethClearCounters(int port)
+{
+    void*   pHndl;
+
+    pHndl = mvEthPortHndlGet(port);
+    if(pHndl != NULL)
+        mvEthMibCountersClear(pHndl);
+
+    return;
+}
+
+
+/* Print counters of the Ethernet port */
+void    ethPortCounters(int port)
+{
+    MV_U32  regValue, regValHigh;
+    void*   pHndl;
+
+    pHndl = mvEthPortHndlGet(port);
+    if(pHndl == NULL)
+        return;
+
+    mvOsPrintf("\n\t Port #%d MIB Counters\n\n", port);
+
+    mvOsPrintf("GoodFramesReceived          = %u\n", 
+              mvEthMibCounterRead(pHndl, ETH_MIB_GOOD_FRAMES_RECEIVED, NULL));
+    mvOsPrintf("BadFramesReceived           = %u\n", 
+              mvEthMibCounterRead(pHndl, ETH_MIB_BAD_FRAMES_RECEIVED, NULL));
+    mvOsPrintf("BroadcastFramesReceived     = %u\n", 
+              mvEthMibCounterRead(pHndl, ETH_MIB_BROADCAST_FRAMES_RECEIVED, NULL));
+    mvOsPrintf("MulticastFramesReceived     = %u\n", 
+              mvEthMibCounterRead(pHndl, ETH_MIB_MULTICAST_FRAMES_RECEIVED, NULL));
+
+    regValue = mvEthMibCounterRead(pHndl, ETH_MIB_GOOD_OCTETS_RECEIVED_LOW, 
+                                 &regValHigh);
+    mvOsPrintf("GoodOctetsReceived          = 0x%08x%08x\n", 
+               regValHigh, regValue);
+
+    mvOsPrintf("\n");
+    mvOsPrintf("GoodFramesSent              = %u\n", 
+              mvEthMibCounterRead(pHndl, ETH_MIB_GOOD_FRAMES_SENT, NULL));
+    mvOsPrintf("BroadcastFramesSent         = %u\n", 
+              mvEthMibCounterRead(pHndl, ETH_MIB_BROADCAST_FRAMES_SENT, NULL));
+    mvOsPrintf("MulticastFramesSent         = %u\n", 
+              mvEthMibCounterRead(pHndl, ETH_MIB_MULTICAST_FRAMES_SENT, NULL));
+
+    regValue = mvEthMibCounterRead(pHndl, ETH_MIB_GOOD_OCTETS_SENT_LOW, 
+                                 &regValHigh);
+    mvOsPrintf("GoodOctetsSent              = 0x%08x%08x\n", regValHigh, regValue);
+
+
+    mvOsPrintf("\n\t FC Control Counters\n");
+
+    regValue = mvEthMibCounterRead(pHndl, ETH_MIB_UNREC_MAC_CONTROL_RECEIVED, NULL);
+    mvOsPrintf("UnrecogMacControlReceived   = %u\n", regValue);
+
+    regValue = mvEthMibCounterRead(pHndl, ETH_MIB_GOOD_FC_RECEIVED, NULL);
+    mvOsPrintf("GoodFCFramesReceived        = %u\n", regValue);
+
+    regValue = mvEthMibCounterRead(pHndl, ETH_MIB_BAD_FC_RECEIVED, NULL);
+    mvOsPrintf("BadFCFramesReceived         = %u\n", regValue);
+
+    regValue = mvEthMibCounterRead(pHndl, ETH_MIB_FC_SENT, NULL);
+    mvOsPrintf("FCFramesSent                = %u\n", regValue);
+
+
+    mvOsPrintf("\n\t RX Errors\n");
+
+    regValue = mvEthMibCounterRead(pHndl, ETH_MIB_BAD_OCTETS_RECEIVED, NULL);
+    mvOsPrintf("BadOctetsReceived           = %u\n", regValue);
+
+    regValue = mvEthMibCounterRead(pHndl, ETH_MIB_UNDERSIZE_RECEIVED, NULL);
+    mvOsPrintf("UndersizeFramesReceived     = %u\n", regValue);
+
+    regValue = mvEthMibCounterRead(pHndl, ETH_MIB_FRAGMENTS_RECEIVED, NULL);
+    mvOsPrintf("FragmentsReceived           = %u\n", regValue);
+
+    regValue = mvEthMibCounterRead(pHndl, ETH_MIB_OVERSIZE_RECEIVED, NULL);
+    mvOsPrintf("OversizeFramesReceived      = %u\n", regValue);
+    
+    regValue = mvEthMibCounterRead(pHndl, ETH_MIB_JABBER_RECEIVED, NULL);
+    mvOsPrintf("JabbersReceived             = %u\n", regValue);
+
+    regValue = mvEthMibCounterRead(pHndl, ETH_MIB_MAC_RECEIVE_ERROR, NULL);
+    mvOsPrintf("MacReceiveErrors            = %u\n", regValue);
+
+    regValue = mvEthMibCounterRead(pHndl, ETH_MIB_BAD_CRC_EVENT, NULL);
+    mvOsPrintf("BadCrcReceived              = %u\n", regValue);
+
+    mvOsPrintf("\n\t TX Errors\n");
+
+    regValue = mvEthMibCounterRead(pHndl, ETH_MIB_INTERNAL_MAC_TRANSMIT_ERR, NULL);
+    mvOsPrintf("TxMacErrors                 = %u\n", regValue);
+
+    regValue = mvEthMibCounterRead(pHndl, ETH_MIB_EXCESSIVE_COLLISION, NULL);
+    mvOsPrintf("TxExcessiveCollisions       = %u\n", regValue);
+
+    regValue = mvEthMibCounterRead(pHndl, ETH_MIB_COLLISION, NULL);
+    mvOsPrintf("TxCollisions                = %u\n", regValue);
+
+    regValue = mvEthMibCounterRead(pHndl, ETH_MIB_LATE_COLLISION, NULL);
+    mvOsPrintf("TxLateCollisions            = %u\n", regValue);
+
+
+    mvOsPrintf("\n");
+    regValue = MV_REG_READ( ETH_RX_DISCARD_PKTS_CNTR_REG(port));
+    mvOsPrintf("Rx Discard packets counter  = %u\n", regValue);
+
+    regValue = MV_REG_READ(ETH_RX_OVERRUN_PKTS_CNTR_REG(port));
+    mvOsPrintf("Rx Overrun packets counter  = %u\n", regValue);
+}
+
+/* Print RMON counters of the Ethernet port */
+void    ethPortRmonCounters(int port)
+{
+    void*   pHndl;
+
+    pHndl = mvEthPortHndlGet(port);
+    if(pHndl == NULL)
+        return;
+
+    mvOsPrintf("\n\t Port #%d RMON MIB Counters\n\n", port);
+
+    mvOsPrintf("64 ByteFramesReceived           = %u\n", 
+              mvEthMibCounterRead(pHndl, ETH_MIB_FRAMES_64_OCTETS, NULL));
+    mvOsPrintf("65...127 ByteFramesReceived     = %u\n", 
+              mvEthMibCounterRead(pHndl, ETH_MIB_FRAMES_65_TO_127_OCTETS, NULL));
+    mvOsPrintf("128...255 ByteFramesReceived    = %u\n", 
+              mvEthMibCounterRead(pHndl, ETH_MIB_FRAMES_128_TO_255_OCTETS, NULL));
+    mvOsPrintf("256...511 ByteFramesReceived    = %u\n", 
+              mvEthMibCounterRead(pHndl, ETH_MIB_FRAMES_256_TO_511_OCTETS, NULL));
+    mvOsPrintf("512...1023 ByteFramesReceived   = %u\n", 
+              mvEthMibCounterRead(pHndl, ETH_MIB_FRAMES_512_TO_1023_OCTETS, NULL));
+    mvOsPrintf("1024...Max ByteFramesReceived   = %u\n", 
+              mvEthMibCounterRead(pHndl, ETH_MIB_FRAMES_1024_TO_MAX_OCTETS, NULL));
+}
+
+/* Print port information */
+void    ethPortStatus(int port)
+{
+    void*   pHndl;
+
+    pHndl = mvEthPortHndlGet(port);
+    if(pHndl != NULL)
+    {
+        mvEthPortShow(pHndl);
+    }
+}
+
+/* Print port queues information */
+void    ethPortQueues(int port, int rxQueue, int txQueue, int mode)  
+{
+    void*   pHndl;
+
+    pHndl = mvEthPortHndlGet(port);
+    if(pHndl != NULL)
+    {
+        mvEthQueuesShow(pHndl, rxQueue, txQueue, mode);
+    }
+}
+
+void    ethUcastSet(int port, char* macStr, int queue)
+{
+    void*   pHndl;
+    MV_U8   macAddr[MV_MAC_ADDR_SIZE];
+
+    pHndl = mvEthPortHndlGet(port);
+    if(pHndl != NULL)
+    {
+        mvMacStrToHex(macStr, macAddr);
+        mvEthMacAddrSet(pHndl, macAddr, queue);
+    }
+}
+
+
+void    ethPortUcastShow(int port)
+{
+    MV_U32  unicastReg, macL, macH;
+    int     i, j;
+
+    macL = MV_REG_READ(ETH_MAC_ADDR_LOW_REG(port));
+    macH = MV_REG_READ(ETH_MAC_ADDR_HIGH_REG(port));
+ 
+    mvOsPrintf("\n\t Port #%d Unicast MAC table: %02x:%02x:%02x:%02x:%02x:%02x\n\n", 
+                port, ((macH >> 24) & 0xff), ((macH >> 16) & 0xff),
+                      ((macH >> 8) & 0xff), (macH  & 0xff), 
+                      ((macL >> 8) & 0xff), (macL  & 0xff) );
+
+    for (i=0; i<4; i++)
+    {
+        unicastReg = MV_REG_READ( (ETH_DA_FILTER_UCAST_BASE(port) + i*4));
+        for(j=0; j<4; j++)
+        {
+            MV_U8   macEntry = (unicastReg >> (8*j)) & 0xFF;
+
+            mvOsPrintf("%X: %8s, Q = %d\n", i*4+j, 
+                (macEntry & BIT0) ? "Accept" : "Reject", (macEntry >> 1) & 0x7);
+        }
+    }
+} 
+
+void    ethMcastAdd(int port, char* macStr, int queue)
+{
+    void*   pHndl;
+    MV_U8   macAddr[MV_MAC_ADDR_SIZE];
+
+    pHndl = mvEthPortHndlGet(port);
+    if(pHndl != NULL)
+    {
+        mvMacStrToHex(macStr, macAddr);
+        mvEthMcastAddrSet(pHndl, macAddr, queue);
+    }
+}
+
+void    ethPortMcast(int port)
+{
+    int     tblIdx, regIdx;
+    MV_U32  regVal;
+
+    mvOsPrintf("\n\t Port #%d Special (IP) Multicast table: 01:00:5E:00:00:XX\n\n", 
+                port);
+
+    for(tblIdx=0; tblIdx<(256/4); tblIdx++)
+    {
+        regVal = MV_REG_READ((ETH_DA_FILTER_SPEC_MCAST_BASE(port) + tblIdx*4));
+        for(regIdx=0; regIdx<4; regIdx++)
+        {
+            if((regVal & (0x01 << (regIdx*8))) != 0)
+            {
+                mvOsPrintf("0x%02X: Accepted, rxQ = %d\n", 
+                    tblIdx*4+regIdx, ((regVal >> (regIdx*8+1)) & 0x07));
+            }
+        }
+    }
+    mvOsPrintf("\n\t Port #%d Other Multicast table\n\n", port);
+    for(tblIdx=0; tblIdx<(256/4); tblIdx++)
+    {
+        regVal = MV_REG_READ((ETH_DA_FILTER_OTH_MCAST_BASE(port) + tblIdx*4));
+        for(regIdx=0; regIdx<4; regIdx++)
+        {
+            if((regVal & (0x01 << (regIdx*8))) != 0)
+            {
+                mvOsPrintf("Crc8=0x%02X: Accepted, rxQ = %d\n", 
+                    tblIdx*4+regIdx, ((regVal >> (regIdx*8+1)) & 0x07));
+            }
+        }
+    }
+}
+
+
+/* Print status of Ethernet port */
+void    mvEthPortShow(void* pHndl)
+{
+    MV_U32              regValue, rxCoal, txCoal;
+    int                 speed, queue, port;
+    ETH_PORT_CTRL*      pPortCtrl = (ETH_PORT_CTRL*)pHndl;
+
+    port = pPortCtrl->portNo;
+
+    regValue = MV_REG_READ( ETH_PORT_STATUS_REG(port) );
+
+    mvOsPrintf("\n\t ethGiga #%d port Status: 0x%04x = 0x%08x\n\n", 
+                port, ETH_PORT_STATUS_REG(port), regValue);
+
+    mvOsPrintf("descInSram=%d, descSwCoher=%d\n", 
+                ethDescInSram, ethDescSwCoher);
+
+    if(regValue & ETH_GMII_SPEED_1000_MASK)
+        speed = 1000;
+    else if(regValue & ETH_MII_SPEED_100_MASK)
+        speed = 100;
+    else
+        speed = 10;
+
+    mvEthCoalGet(pPortCtrl, &rxCoal, &txCoal);
+
+    /* Link, Speed, Duplex, FlowControl */
+    mvOsPrintf("Link=%s, Speed=%d, Duplex=%s, RxFlowControl=%s",
+                (regValue & ETH_LINK_UP_MASK) ? "UP" : "DOWN",
+                speed, 
+                (regValue & ETH_FULL_DUPLEX_MASK) ? "FULL" : "HALF",
+                (regValue & ETH_ENABLE_RCV_FLOW_CTRL_MASK) ? "ENABLE" : "DISABLE");
+
+    mvOsPrintf("\n");
+
+    mvOsPrintf("RxCoal = %d usec, TxCoal = %d usec\n", 
+                rxCoal, txCoal);
+
+    mvOsPrintf("rxDefQ=%d, arpQ=%d, bpduQ=%d, tcpQ=%d, udpQ=%d\n\n",
+                pPortCtrl->portConfig.rxDefQ, pPortCtrl->portConfig.rxArpQ, 
+                pPortCtrl->portConfig.rxBpduQ, 
+                pPortCtrl->portConfig.rxTcpQ, pPortCtrl->portConfig.rxUdpQ); 
+
+    /* Print all RX and TX queues */
+    for(queue=0; queue<MV_ETH_RX_Q_NUM; queue++)
+    {
+        mvOsPrintf("RX Queue #%d: base=0x%lx, free=%d\n", 
+                    queue, (MV_ULONG)pPortCtrl->rxQueue[queue].pFirstDescr,
+                    mvEthRxResourceGet(pPortCtrl, queue) );
+    }
+    mvOsPrintf("\n");
+    for(queue=0; queue<MV_ETH_TX_Q_NUM; queue++)
+    {
+        mvOsPrintf("TX Queue #%d: base=0x%lx, free=%d\n", 
+                queue, (MV_ULONG)pPortCtrl->txQueue[queue].pFirstDescr,
+                mvEthTxResourceGet(pPortCtrl, queue) );
+    }
+}
+
+/* Print RX and TX queue of the Ethernet port */
+void    mvEthQueuesShow(void* pHndl, int rxQueue, int txQueue, int mode)  
+{
+    ETH_PORT_CTRL   *pPortCtrl = (ETH_PORT_CTRL*)pHndl;
+    ETH_QUEUE_CTRL  *pQueueCtrl;
+    MV_U32          regValue;
+    ETH_RX_DESC     *pRxDescr;
+    ETH_TX_DESC     *pTxDescr;
+    int             i, port = pPortCtrl->portNo;
+
+    if( (rxQueue >=0) && (rxQueue < MV_ETH_RX_Q_NUM) )
+    {
+        pQueueCtrl = &(pPortCtrl->rxQueue[rxQueue]);
+        mvOsPrintf("Port #%d, RX Queue #%d\n\n", port, rxQueue);
+
+        mvOsPrintf("CURR_RX_DESC_PTR        : 0x%X = 0x%08x\n", 
+            ETH_RX_CUR_DESC_PTR_REG(port, rxQueue), 
+            MV_REG_READ( ETH_RX_CUR_DESC_PTR_REG(port, rxQueue)));
+
+
+        if(pQueueCtrl->pFirstDescr != NULL)
+        {
+            mvOsPrintf("pFirstDescr=0x%lx, pLastDescr=0x%lx, numOfResources=%d\n",
+                (MV_ULONG)pQueueCtrl->pFirstDescr, (MV_ULONG)pQueueCtrl->pLastDescr, 
+                pQueueCtrl->resource);
+            mvOsPrintf("pCurrDescr: 0x%lx, pUsedDescr: 0x%lx\n",
+                (MV_ULONG)pQueueCtrl->pCurrentDescr, 
+                (MV_ULONG)pQueueCtrl->pUsedDescr);
+
+            if(mode == 1)
+            {
+                pRxDescr = (ETH_RX_DESC*)pQueueCtrl->pFirstDescr;
+                i = 0; 
+                do 
+                {
+                    mvOsPrintf("%3d. desc=%08x (%08x), cmd=%08x, data=%4d, buf=%4d, buf=%08x, pkt=%lx, os=%lx\n", 
+                                i, (MV_U32)pRxDescr, (MV_U32)ethDescVirtToPhy(pQueueCtrl, (MV_U8*)pRxDescr), 
+                                pRxDescr->cmdSts, pRxDescr->byteCnt, (MV_U32)pRxDescr->bufSize, 
+                                (unsigned int)pRxDescr->bufPtr, (MV_ULONG)pRxDescr->returnInfo,
+                                ((MV_PKT_INFO*)pRxDescr->returnInfo)->osInfo);
+
+                    ETH_DESCR_INV(pPortCtrl, pRxDescr);
+                    pRxDescr = RX_NEXT_DESC_PTR(pRxDescr, pQueueCtrl);
+                    i++;
+                } while (pRxDescr != pQueueCtrl->pFirstDescr);
+            }
+        }
+        else
+            mvOsPrintf("RX Queue #%d is NOT CREATED\n", rxQueue);
+    }
+
+    if( (txQueue >=0) && (txQueue < MV_ETH_TX_Q_NUM) )
+    {
+        pQueueCtrl = &(pPortCtrl->txQueue[txQueue]);
+        mvOsPrintf("Port #%d, TX Queue #%d\n\n", port, txQueue);
+
+        regValue = MV_REG_READ( ETH_TX_CUR_DESC_PTR_REG(port, txQueue));
+        mvOsPrintf("CURR_TX_DESC_PTR        : 0x%X = 0x%08x\n", 
+                    ETH_TX_CUR_DESC_PTR_REG(port, txQueue), regValue);
+
+        if(pQueueCtrl->pFirstDescr != NULL)
+        {
+            mvOsPrintf("pFirstDescr=0x%lx, pLastDescr=0x%lx, numOfResources=%d\n",
+                       (MV_ULONG)pQueueCtrl->pFirstDescr, 
+                       (MV_ULONG)pQueueCtrl->pLastDescr, 
+                        pQueueCtrl->resource);
+            mvOsPrintf("pCurrDescr: 0x%lx, pUsedDescr: 0x%lx\n",
+                       (MV_ULONG)pQueueCtrl->pCurrentDescr, 
+                       (MV_ULONG)pQueueCtrl->pUsedDescr);
+
+            if(mode == 1)
+            {
+                pTxDescr = (ETH_TX_DESC*)pQueueCtrl->pFirstDescr;
+                i = 0; 
+                do 
+                {
+                    mvOsPrintf("%3d. desc=%08x (%08x), cmd=%08x, data=%4d, buf=%08x, pkt=%lx, os=%lx\n", 
+                                i, (MV_U32)pTxDescr, (MV_U32)ethDescVirtToPhy(pQueueCtrl, (MV_U8*)pTxDescr), 
+                                pTxDescr->cmdSts, pTxDescr->byteCnt, 
+                                (MV_U32)pTxDescr->bufPtr, (MV_ULONG)pTxDescr->returnInfo,
+                                pTxDescr->returnInfo ? (((MV_PKT_INFO*)pTxDescr->returnInfo)->osInfo) : 0x0);
+
+                    ETH_DESCR_INV(pPortCtrl, pTxDescr);
+                    pTxDescr = TX_NEXT_DESC_PTR(pTxDescr, pQueueCtrl);
+                    i++;
+                } while (pTxDescr != pQueueCtrl->pFirstDescr);
+            }
+        }
+        else
+            mvOsPrintf("TX Queue #%d is NOT CREATED\n", txQueue);
+    }
+}
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthDebug.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthDebug.h
new file mode 100644
index 0000000000..6db85f7a75
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthDebug.h
@@ -0,0 +1,146 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+#ifndef __MV_ETH_DEBUG_H__
+#define __MV_ETH_DEBUG_H__
+
+#if 0
+/*
+ ** Externs
+ */
+void     ethBpduRxQ(int port, int bpduQueue);
+void     ethArpRxQ(int port, int bpduQueue);
+void     ethTcpRxQ(int port, int bpduQueue);
+void     ethUdpRxQ(int port, int bpduQueue);
+void     ethMcastAdd(int port, char* macStr, int queue);
+
+#ifdef INCLUDE_MULTI_QUEUE
+void   	ethRxPolicy( int port);
+void   	ethTxPolicy( int port);
+void   	ethTxPolDA(int port, char* macStr, int txQ, char* headerHexStr);
+void   	ethRxPolMode(int port, MV_ETH_PRIO_MODE prioMode);
+void    ethRxPolQ(int port, int rxQueue, int rxQuota);
+#endif /* INCLUDE_MULTI_QUEUE */
+
+void    print_egiga_stat(void *sc, unsigned int port);
+void    ethPortStatus (int port);
+void    ethPortQueues( int port, int rxQueue, int txQueue, int mode);
+void    ethPortMcast(int port);
+void    ethPortRegs(int port);
+void    ethPortCounters(int port);
+void 	ethPortRmonCounters(int port);
+void    ethRxCoal(int port, int usec);
+void    ethTxCoal(int port, int usec);
+
+void    ethRegs(int port);
+void	ethClearCounters(int port);
+void    ethUcastSet(int port, char* macStr, int queue);
+void    ethPortUcastShow(int port);
+
+#ifdef CONFIG_MV_ETH_HEADER
+void	run_com_header(const char *buffer);
+#endif
+
+#ifdef INCLUDE_MULTI_QUEUE
+void    ethRxPolMode(int port, MV_ETH_PRIO_MODE prioMode);
+void    ethRxPolQ(int port, int queue, int quota);
+void    ethRxPolicy(int port);
+void    ethTxPolDef(int port, int txQ, char* headerHexStr);
+void    ethTxPolDA(int port, char* macStr, int txQ, char* headerHexStr);
+void    ethTxPolicy(int port);
+#endif /* INCLUDE_MULTI_QUEUE */
+
+#if (MV_ETH_VERSION >= 4)
+void     ethEjpModeSet(int port, int mode)
+#endif
+#endif /* 0 */
+
+
+
+
+void    ethRxCoal(int port, int usec);
+void    ethTxCoal(int port, int usec);
+#if (MV_ETH_VERSION >= 4)
+void     ethEjpModeSet(int port, int mode);
+#endif /* (MV_ETH_VERSION >= 4) */
+
+void    ethBpduRxQ(int port, int bpduQueue);
+void    ethArpRxQ(int port, int arpQueue);
+void    ethTcpRxQ(int port, int tcpQueue);
+void    ethUdpRxQ(int port, int udpQueue);
+void    ethTxPolicyRegs(int port);
+void    ethPortRegs(int port);
+void    ethRegs(int port);
+void ethClearCounters(int port);
+void    ethPortCounters(int port);
+void    ethPortRmonCounters(int port);
+void    ethPortStatus(int port);
+void    ethPortQueues(int port, int rxQueue, int txQueue, int mode);
+void    ethUcastSet(int port, char* macStr, int queue);
+void    ethPortUcastShow(int port);
+void    ethMcastAdd(int port, char* macStr, int queue);
+void    ethPortMcast(int port);
+void    mvEthPortShow(void* pHndl);
+void    mvEthQueuesShow(void* pHndl, int rxQueue, int txQueue, int mode);
+
+#endif
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthGbe.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthGbe.h
new file mode 100644
index 0000000000..f4cae50781
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthGbe.h
@@ -0,0 +1,751 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+/*******************************************************************************
+* mvEth.h - Header File for : Marvell Gigabit Ethernet Controller
+*
+* DESCRIPTION:
+*       This header file contains macros typedefs and function declaration specific to 
+*       the Marvell Gigabit Ethernet Controller.
+*
+* DEPENDENCIES:
+*       None.
+*
+*******************************************************************************/
+
+#ifndef __mvEthGbe_h__
+#define __mvEthGbe_h__
+
+extern MV_BOOL         ethDescInSram;
+extern MV_BOOL         ethDescSwCoher;
+extern ETH_PORT_CTRL*  ethPortCtrl[];
+
+static INLINE MV_ULONG  ethDescVirtToPhy(ETH_QUEUE_CTRL* pQueueCtrl, MV_U8* pDesc)
+{
+#if defined (ETH_DESCR_IN_SRAM)
+    if( ethDescInSram )
+        return mvSramVirtToPhy(pDesc);
+    else
+#endif /* ETH_DESCR_IN_SRAM */
+        return (pQueueCtrl->descBuf.bufPhysAddr + (pDesc - pQueueCtrl->descBuf.bufVirtPtr));
+}
+/* Return port handler */
+#define mvEthPortHndlGet(port)  ethPortCtrl[port]
+
+/* Used as WA for HW/SW race on TX */
+static INLINE int      mvEthPortTxEnable(void* pPortHndl, int queue, int max_deep)
+{
+    int                 deep = 0;
+    MV_U32              txCurrReg, txEnReg;
+    ETH_TX_DESC*        pTxLastDesc;
+    ETH_QUEUE_CTRL*     pQueueCtrl;
+    ETH_PORT_CTRL*      pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+
+    txEnReg = MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(pPortCtrl->portNo));
+    if( (txEnReg & MV_32BIT_LE_FAST(ETH_TXQ_ENABLE_MASK)) == 0)
+    {
+        MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(pPortCtrl->portNo)) = pPortCtrl->portTxQueueCmdReg;
+        return 0;
+    }
+
+    pQueueCtrl = &pPortCtrl->txQueue[queue];
+    pTxLastDesc = pQueueCtrl->pCurrentDescr;
+    txCurrReg = MV_REG_READ(ETH_TX_CUR_DESC_PTR_REG(pPortCtrl->portNo, queue));
+    if(ethDescVirtToPhy(pQueueCtrl, (MV_U8*)pTxLastDesc) == txCurrReg)
+    {
+        /* All descriptors are processed, no chance for race */
+        return 0;
+    }
+
+    /* Check distance betwee HW and SW location: */
+    /* If distance between HW and SW pointers is less than max_deep descriptors */
+    /* Race condition is possible, so wait end of TX and restart TXQ */
+    while(deep < max_deep)
+    {
+        pTxLastDesc = TX_PREV_DESC_PTR(pTxLastDesc, pQueueCtrl);
+        if(ethDescVirtToPhy(pQueueCtrl, (MV_U8*)pTxLastDesc) == txCurrReg)
+        {
+            int count = 0;
+
+            while( (txEnReg & MV_32BIT_LE_FAST(ETH_TXQ_ENABLE_MASK)) != 0)
+            {   
+                count++;
+                if(count > 10000)
+                {
+                    mvOsPrintf("mvEthPortTxEnable: timeout - TXQ_CMD=0x%08x\n", 
+                                MV_REG_READ(ETH_TX_QUEUE_COMMAND_REG(pPortCtrl->portNo)) );
+                    break;
+                }
+                txEnReg = MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(pPortCtrl->portNo));
+            }
+
+            MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(pPortCtrl->portNo)) = pPortCtrl->portTxQueueCmdReg;
+            return count;
+        }
+        deep++;
+    }
+    /* Distance between HW and SW pointers is more than max_deep descriptors, */
+    /* So NO race condition - do nothing */
+    return -1;
+}
+
+
+/* defines  */
+#define ETH_CSUM_MIN_BYTE_COUNT     72
+
+/* Tailgate and Kirwood have only 2K TX FIFO */
+#if (MV_ETH_VERSION == 2) || (MV_ETH_VERSION == 4)
+#define ETH_CSUM_MAX_BYTE_COUNT     1600
+#else
+#define ETH_CSUM_MAX_BYTE_COUNT     9*1024
+#endif /* MV_ETH_VERSION */
+
+#define ETH_MV_HEADER_SIZE	    2
+#define ETH_MV_TX_EN
+
+/* An offest in Tx descriptors to store data for buffers less than 8 Bytes */
+#define MIN_TX_BUFF_LOAD            8
+#define TX_BUF_OFFSET_IN_DESC       (ETH_TX_DESC_ALIGNED_SIZE - MIN_TX_BUFF_LOAD)
+
+/* Default port configuration value */
+#define PORT_CONFIG_VALUE                       \
+             ETH_DEF_RX_QUEUE_MASK(0)       |   \
+             ETH_DEF_RX_ARP_QUEUE_MASK(0)   |   \
+             ETH_DEF_RX_TCP_QUEUE_MASK(0)   |   \
+             ETH_DEF_RX_UDP_QUEUE_MASK(0)   |   \
+             ETH_DEF_RX_BPDU_QUEUE_MASK(0)  |   \
+             ETH_RX_CHECKSUM_WITH_PSEUDO_HDR
+
+/* Default port extend configuration value */
+#define PORT_CONFIG_EXTEND_VALUE            0
+
+#define PORT_SERIAL_CONTROL_VALUE                           \
+            ETH_DISABLE_FC_AUTO_NEG_MASK                |   \
+            BIT9                                        |   \
+            ETH_DO_NOT_FORCE_LINK_FAIL_MASK             |   \
+            ETH_MAX_RX_PACKET_1552BYTE                  |   \
+            ETH_SET_FULL_DUPLEX_MASK
+
+#define PORT_SERIAL_CONTROL_100MB_FORCE_VALUE               \
+            ETH_FORCE_LINK_PASS_MASK                    |   \
+            ETH_DISABLE_DUPLEX_AUTO_NEG_MASK            |   \
+            ETH_DISABLE_FC_AUTO_NEG_MASK                |   \
+            BIT9                                        |   \
+            ETH_DO_NOT_FORCE_LINK_FAIL_MASK             |   \
+            ETH_DISABLE_SPEED_AUTO_NEG_MASK             |   \
+            ETH_SET_FULL_DUPLEX_MASK                    |   \
+            ETH_SET_MII_SPEED_100_MASK                  |   \
+            ETH_MAX_RX_PACKET_1552BYTE
+
+
+#define PORT_SERIAL_CONTROL_1000MB_FORCE_VALUE              \
+            ETH_FORCE_LINK_PASS_MASK                    |   \
+            ETH_DISABLE_DUPLEX_AUTO_NEG_MASK            |   \
+            ETH_DISABLE_FC_AUTO_NEG_MASK                |   \
+            BIT9                                        |   \
+            ETH_DO_NOT_FORCE_LINK_FAIL_MASK             |   \
+            ETH_DISABLE_SPEED_AUTO_NEG_MASK             |   \
+            ETH_SET_FULL_DUPLEX_MASK                    |   \
+            ETH_SET_GMII_SPEED_1000_MASK                |   \
+            ETH_MAX_RX_PACKET_1552BYTE
+
+#define PORT_SERIAL_CONTROL_SGMII_IBAN_VALUE                \
+            ETH_DISABLE_FC_AUTO_NEG_MASK                |   \
+            BIT9                                        |   \
+            ETH_IN_BAND_AN_EN_MASK                      |   \
+            ETH_DO_NOT_FORCE_LINK_FAIL_MASK             |   \
+            ETH_MAX_RX_PACKET_1552BYTE                  
+
+/* Function headers: */
+MV_VOID     mvEthSetSpecialMcastTable(int portNo, int queue);
+MV_STATUS   mvEthArpRxQueue(void* pPortHandle, int arpQueue);
+MV_STATUS   mvEthUdpRxQueue(void* pPortHandle, int udpQueue);
+MV_STATUS   mvEthTcpRxQueue(void* pPortHandle, int tcpQueue);
+MV_STATUS   mvEthMacAddrGet(int portNo, unsigned char *pAddr);
+MV_VOID     mvEthSetOtherMcastTable(int portNo, int queue);
+MV_STATUS   mvEthHeaderModeSet(void* pPortHandle, MV_ETH_HEADER_MODE headerMode);
+/* Interrupt Coalesting functions */
+MV_U32      mvEthRxCoalSet(void* pPortHndl, MV_U32 uSec);
+MV_U32      mvEthTxCoalSet(void* pPortHndl, MV_U32 uSec);
+MV_STATUS   mvEthCoalGet(void* pPortHndl, MV_U32* pRxCoal, MV_U32* pTxCoal);
+
+/******************************************************************************/
+/*                          Data Flow functions                               */
+/******************************************************************************/
+static INLINE void      mvEthPortTxRestart(void* pPortHndl)
+{
+    ETH_PORT_CTRL*      pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+
+    MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(pPortCtrl->portNo)) = pPortCtrl->portTxQueueCmdReg;
+}
+
+/* Get number of Free resources in specific TX queue */
+static INLINE int     mvEthTxResourceGet(void* pPortHndl, int txQueue)
+{
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+
+    return (pPortCtrl->txQueue[txQueue].resource);      
+}
+
+/* Get number of Free resources in specific RX queue */
+static INLINE int     mvEthRxResourceGet(void* pPortHndl, int rxQueue)
+{
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+
+    return (pPortCtrl->rxQueue[rxQueue].resource);      
+}
+
+static INLINE int     mvEthTxQueueIsFull(void* pPortHndl, int txQueue)
+{
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+
+    if(pPortCtrl->txQueue[txQueue].resource == 0)
+        return MV_TRUE;
+
+    return MV_FALSE;
+}
+
+/* Get number of Free resources in specific RX queue */
+static INLINE int     mvEthRxQueueIsFull(void* pPortHndl, int rxQueue)
+{
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+    ETH_QUEUE_CTRL* pQueueCtrl = &pPortCtrl->rxQueue[rxQueue];
+
+    if( (pQueueCtrl->pUsedDescr == pQueueCtrl->pCurrentDescr) && 
+        (pQueueCtrl->resource != 0) )
+        return MV_TRUE;
+
+    return MV_FALSE;
+}
+
+static INLINE int     mvEthTxQueueIsEmpty(void* pPortHndl, int txQueue)
+{
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+    ETH_QUEUE_CTRL* pQueueCtrl = &pPortCtrl->txQueue[txQueue];
+
+    if( (pQueueCtrl->pUsedDescr == pQueueCtrl->pCurrentDescr) &&
+        (pQueueCtrl->resource != 0) )
+    {
+        return MV_TRUE;
+    }
+    return MV_FALSE;
+}
+
+/* Get number of Free resources in specific RX queue */
+static INLINE int     mvEthRxQueueIsEmpty(void* pPortHndl, int rxQueue)
+{
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pPortHndl;
+
+    if(pPortCtrl->rxQueue[rxQueue].resource == 0)
+        return MV_TRUE;
+
+    return MV_FALSE;
+}
+
+/*******************************************************************************
+* mvEthPortTx - Send an Ethernet packet
+*
+* DESCRIPTION:
+*       This routine send a given packet described by pPktInfo parameter. 
+*       Single buffer only.
+*
+* INPUT:
+*       void*       pEthPortHndl  - Ethernet Port handler.
+*       int         txQueue       - Number of Tx queue.
+*       MV_PKT_INFO *pPktInfo     - User packet to send.
+*
+* RETURN:
+*       MV_NO_RESOURCE  - No enough resources to send this packet.
+*       MV_ERROR        - Unexpected Fatal error.
+*       MV_OK           - Packet send successfully.
+*
+*******************************************************************************/
+static INLINE MV_STATUS   mvEthPortTx(void* pEthPortHndl, int txQueue, MV_PKT_INFO* pPktInfo)
+{
+    ETH_TX_DESC*    pTxCurrDesc;
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl;
+    ETH_QUEUE_CTRL* pQueueCtrl;
+    int             portNo;
+    MV_BUF_INFO*    pBufInfo = pPktInfo->pFrags;
+
+#ifdef ETH_DEBUG
+    if(pPortCtrl->portState != MV_ACTIVE)
+        return MV_BAD_STATE;
+#endif /* ETH_DEBUG */
+
+    portNo = pPortCtrl->portNo;
+    pQueueCtrl = &pPortCtrl->txQueue[txQueue];
+
+    /* Get the Tx Desc ring indexes */
+    pTxCurrDesc = pQueueCtrl->pCurrentDescr;
+
+    /* Check if there is enough resources to send the packet */
+    if(pQueueCtrl->resource == 0)
+        return MV_NO_RESOURCE;
+
+    pTxCurrDesc->byteCnt = pBufInfo->dataSize;
+
+    /* Flash Buffer */
+    if(pPktInfo->pktSize != 0)
+    {
+#ifdef MV_NETBSD
+        pTxCurrDesc->bufPtr = pBufInfo->bufPhysAddr;
+        ETH_PACKET_CACHE_FLUSH(pBufInfo->bufVirtPtr, pPktInfo->pktSize);
+#else
+        pTxCurrDesc->bufPtr = ETH_PACKET_CACHE_FLUSH(pBufInfo->bufVirtPtr, pPktInfo->pktSize);
+#endif
+        pPktInfo->pktSize = 0;
+    }
+    else
+        pTxCurrDesc->bufPtr = pBufInfo->bufPhysAddr;
+
+    pTxCurrDesc->returnInfo = (MV_ULONG)pPktInfo;
+
+    /* There is only one buffer in the packet */
+    /* The OSG might set some bits for checksum offload, so add them to first descriptor */
+    pTxCurrDesc->cmdSts = pPktInfo->status              |
+                          ETH_BUFFER_OWNED_BY_DMA       |
+                          ETH_TX_GENERATE_CRC_MASK      |
+                          ETH_TX_ENABLE_INTERRUPT_MASK  |
+                          ETH_TX_ZERO_PADDING_MASK      |
+                          ETH_TX_FIRST_DESC_MASK        |
+                          ETH_TX_LAST_DESC_MASK;
+
+    ETH_DESCR_FLUSH_INV(pPortCtrl, pTxCurrDesc);
+
+    pQueueCtrl->resource--;
+    pQueueCtrl->pCurrentDescr = TX_NEXT_DESC_PTR(pTxCurrDesc, pQueueCtrl);
+
+    /* Apply send command */
+    MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(portNo)) = pPortCtrl->portTxQueueCmdReg;
+
+    return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvEthPortSgTx - Send an Ethernet packet
+*
+* DESCRIPTION:
+*       This routine send a given packet described by pBufInfo parameter. It
+*       supports transmitting of a packet spaned over multiple buffers. 
+*
+* INPUT:
+*       void*       pEthPortHndl  - Ethernet Port handler.
+*       int         txQueue       - Number of Tx queue.
+*       MV_PKT_INFO *pPktInfo     - User packet to send.
+*
+* RETURN:
+*       MV_NO_RESOURCE  - No enough resources to send this packet.
+*       MV_ERROR        - Unexpected Fatal error.
+*       MV_OK           - Packet send successfully.
+*
+*******************************************************************************/
+static INLINE MV_STATUS   mvEthPortSgTx(void* pEthPortHndl, int txQueue, MV_PKT_INFO* pPktInfo)
+{
+    ETH_TX_DESC*    pTxFirstDesc;
+    ETH_TX_DESC*    pTxCurrDesc;
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl;
+    ETH_QUEUE_CTRL* pQueueCtrl;
+    int             portNo, bufCount;
+    MV_BUF_INFO*    pBufInfo = pPktInfo->pFrags;
+    MV_U8*          pTxBuf;
+
+#ifdef ETH_DEBUG
+    if(pPortCtrl->portState != MV_ACTIVE)
+        return MV_BAD_STATE;
+#endif /* ETH_DEBUG */
+
+    portNo = pPortCtrl->portNo;
+    pQueueCtrl = &pPortCtrl->txQueue[txQueue];
+
+    /* Get the Tx Desc ring indexes */
+    pTxCurrDesc = pQueueCtrl->pCurrentDescr;
+
+    /* Check if there is enough resources to send the packet */
+    if(pQueueCtrl->resource < pPktInfo->numFrags)
+        return MV_NO_RESOURCE;
+
+    /* Remember first desc */
+    pTxFirstDesc  = pTxCurrDesc;
+
+    bufCount = 0;
+    while(MV_TRUE)
+    {   
+        if(pBufInfo[bufCount].dataSize <= MIN_TX_BUFF_LOAD)
+        {
+            /* Buffers with a payload smaller than MIN_TX_BUFF_LOAD (8 bytes) must be aligned    */
+            /* to 64-bit boundary. Two options here:                                             */
+            /* 1) Usually, copy the payload to the reserved 8 bytes inside descriptor.           */
+            /* 2) In the Half duplex workaround, the reserved 8 bytes inside descriptor are used */ 
+            /*    as a pointer to the aligned buffer, copy the small payload to this buffer.     */
+            pTxBuf = ((MV_U8*)pTxCurrDesc)+TX_BUF_OFFSET_IN_DESC;
+            mvOsBCopy(pBufInfo[bufCount].bufVirtPtr, pTxBuf, pBufInfo[bufCount].dataSize);
+            pTxCurrDesc->bufPtr = ethDescVirtToPhy(pQueueCtrl, pTxBuf);
+        }
+        else
+        {
+            /* Flash Buffer */
+#ifdef MV_NETBSD
+            pTxCurrDesc->bufPtr = pBufInfo[bufCount].bufPhysAddr;
+	    ETH_PACKET_CACHE_FLUSH(pBufInfo[bufCount].bufVirtPtr, pBufInfo[bufCount].dataSize);
+#else
+            pTxCurrDesc->bufPtr = ETH_PACKET_CACHE_FLUSH(pBufInfo[bufCount].bufVirtPtr, pBufInfo[bufCount].dataSize);
+#endif
+        }
+
+        pTxCurrDesc->byteCnt = pBufInfo[bufCount].dataSize;
+        bufCount++;
+
+        if(bufCount >= pPktInfo->numFrags)
+            break;
+
+        if(bufCount > 1)
+        {
+            /* There is middle buffer of the packet Not First and Not Last */
+            pTxCurrDesc->cmdSts = ETH_BUFFER_OWNED_BY_DMA;
+            ETH_DESCR_FLUSH_INV(pPortCtrl, pTxCurrDesc);
+        }
+        /* Go to next descriptor and next buffer */
+        pTxCurrDesc = TX_NEXT_DESC_PTR(pTxCurrDesc, pQueueCtrl);
+    }
+    /* Set last desc with DMA ownership and interrupt enable. */
+    pTxCurrDesc->returnInfo = (MV_ULONG)pPktInfo;
+    if(bufCount == 1) 
+    {
+        /* There is only one buffer in the packet */
+        /* The OSG might set some bits for checksum offload, so add them to first descriptor */
+        pTxCurrDesc->cmdSts = pPktInfo->status              |
+                              ETH_BUFFER_OWNED_BY_DMA       |
+                              ETH_TX_GENERATE_CRC_MASK      |
+                              ETH_TX_ENABLE_INTERRUPT_MASK  |
+                              ETH_TX_ZERO_PADDING_MASK      |
+                              ETH_TX_FIRST_DESC_MASK        |
+                              ETH_TX_LAST_DESC_MASK;
+
+        ETH_DESCR_FLUSH_INV(pPortCtrl, pTxCurrDesc);
+    }
+    else
+    {
+        /* Last but not First */
+        pTxCurrDesc->cmdSts = ETH_BUFFER_OWNED_BY_DMA       |
+                              ETH_TX_ENABLE_INTERRUPT_MASK  |
+                              ETH_TX_ZERO_PADDING_MASK      |
+                              ETH_TX_LAST_DESC_MASK;
+
+        ETH_DESCR_FLUSH_INV(pPortCtrl, pTxCurrDesc);
+
+        /* Update First when more than one buffer in the packet */
+        /* The OSG might set some bits for checksum offload, so add them to first descriptor */
+        pTxFirstDesc->cmdSts = pPktInfo->status             |
+                               ETH_BUFFER_OWNED_BY_DMA      |
+                               ETH_TX_GENERATE_CRC_MASK     |
+                               ETH_TX_FIRST_DESC_MASK;
+
+        ETH_DESCR_FLUSH_INV(pPortCtrl, pTxFirstDesc);
+    }
+    /* Update txQueue state */
+    pQueueCtrl->resource -= bufCount;
+    pQueueCtrl->pCurrentDescr = TX_NEXT_DESC_PTR(pTxCurrDesc, pQueueCtrl);
+
+    /* Apply send command */
+    MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(portNo)) = pPortCtrl->portTxQueueCmdReg;
+
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvEthPortTxDone - Free all used Tx descriptors and mBlks.
+*
+* DESCRIPTION:
+*       This routine returns the transmitted packet information to the caller.
+*
+* INPUT:
+*       void*       pEthPortHndl    - Ethernet Port handler.
+*       int         txQueue         - Number of Tx queue.
+*
+* OUTPUT:
+*       MV_PKT_INFO *pPktInfo       - Pointer to packet was sent.
+*
+* RETURN:
+*       MV_NOT_FOUND    - No transmitted packets to return. Transmit in progress.
+*       MV_EMPTY        - No transmitted packets to return. TX Queue is empty.
+*       MV_ERROR        - Unexpected Fatal error.
+*       MV_OK           - There is transmitted packet in the queue, 
+*                       'pPktInfo' filled with relevant information.
+*
+*******************************************************************************/
+static INLINE MV_PKT_INFO*    mvEthPortTxDone(void* pEthPortHndl, int txQueue)
+{
+    ETH_TX_DESC*    pTxCurrDesc;
+    ETH_TX_DESC*    pTxUsedDesc;
+    ETH_QUEUE_CTRL* pQueueCtrl;
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl;
+    MV_PKT_INFO*    pPktInfo;
+    MV_U32          commandStatus;
+
+    pQueueCtrl = &pPortCtrl->txQueue[txQueue];
+
+    pTxUsedDesc = pQueueCtrl->pUsedDescr;
+    pTxCurrDesc = pQueueCtrl->pCurrentDescr;
+
+    while(MV_TRUE)
+    {
+        /* No more used descriptors */
+        commandStatus = pTxUsedDesc->cmdSts;
+        if (commandStatus  & (ETH_BUFFER_OWNED_BY_DMA))
+        {    
+            ETH_DESCR_INV(pPortCtrl, pTxUsedDesc);
+            return NULL;
+        }
+        if( (pTxUsedDesc == pTxCurrDesc) &&
+            (pQueueCtrl->resource != 0) )
+        {
+            return NULL;
+        }
+        pQueueCtrl->resource++;
+        pQueueCtrl->pUsedDescr = TX_NEXT_DESC_PTR(pTxUsedDesc, pQueueCtrl);
+        if(commandStatus & (ETH_TX_LAST_DESC_MASK)) 
+        {
+            pPktInfo = (MV_PKT_INFO*)pTxUsedDesc->returnInfo;
+            pPktInfo->status  = commandStatus;            
+            return pPktInfo;
+        }
+        pTxUsedDesc = pQueueCtrl->pUsedDescr;
+    }
+}
+
+/*******************************************************************************
+* mvEthPortRx - Get new received packets from Rx queue.
+*
+* DESCRIPTION:
+*       This routine returns the received data to the caller. There is no
+*       data copying during routine operation. All information is returned
+*       using pointer to packet information struct passed from the caller.
+*
+* INPUT:
+*       void*       pEthPortHndl    - Ethernet Port handler.
+*       int         rxQueue         - Number of Rx queue.
+*
+* OUTPUT:
+*       MV_PKT_INFO *pPktInfo       - Pointer to received packet.
+*
+* RETURN:
+*       MV_NO_RESOURCE  - No free resources in RX queue.
+*       MV_ERROR        - Unexpected Fatal error.
+*       MV_OK           - New packet received and 'pBufInfo' structure filled
+*                       with relevant information.
+*
+*******************************************************************************/
+static INLINE MV_PKT_INFO*    mvEthPortRx(void* pEthPortHndl, int rxQueue)
+{
+    ETH_RX_DESC     *pRxCurrDesc;
+    MV_U32          commandStatus;
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl;
+    ETH_QUEUE_CTRL* pQueueCtrl;
+    MV_PKT_INFO*    pPktInfo;
+
+    pQueueCtrl = &(pPortCtrl->rxQueue[rxQueue]);
+
+    /* Check resources */
+    if(pQueueCtrl->resource == 0)
+    {
+        mvOsPrintf("ethPortRx: no more resources\n");
+        return NULL;
+    }
+    while(MV_TRUE)
+    {
+        /* Get the Rx Desc ring 'curr and 'used' indexes */
+        pRxCurrDesc = pQueueCtrl->pCurrentDescr;
+
+	commandStatus   = pRxCurrDesc->cmdSts;
+        if (commandStatus & (ETH_BUFFER_OWNED_BY_DMA))
+        {
+            /* Nothing to receive... */
+            ETH_DESCR_INV(pPortCtrl, pRxCurrDesc);
+            return NULL;
+        }
+
+        /* Valid RX only if FIRST and LAST bits are set */
+        if( (commandStatus & (ETH_RX_LAST_DESC_MASK | ETH_RX_FIRST_DESC_MASK)) == 
+                             (ETH_RX_LAST_DESC_MASK | ETH_RX_FIRST_DESC_MASK) )
+        {
+            pPktInfo = (MV_PKT_INFO*)pRxCurrDesc->returnInfo;
+            pPktInfo->pFrags->dataSize  = pRxCurrDesc->byteCnt - 4;
+            pPktInfo->status            = commandStatus;
+            pPktInfo->fragIP            = pRxCurrDesc->bufSize & ETH_RX_IP_FRAGMENTED_FRAME_MASK;
+
+            pQueueCtrl->resource--;
+            /* Update 'curr' in data structure */
+            pQueueCtrl->pCurrentDescr = RX_NEXT_DESC_PTR(pRxCurrDesc, pQueueCtrl);
+
+#ifdef INCLUDE_SYNC_BARR
+            mvCpuIfSyncBarr(DRAM_TARGET);
+#endif
+            return pPktInfo;
+        }
+        else
+        {
+            ETH_RX_DESC*    pRxUsedDesc = pQueueCtrl->pUsedDescr;
+
+#ifdef ETH_DEBUG
+            mvOsPrintf("ethDrv: Unexpected Jumbo frame: "
+                       "status=0x%08x, byteCnt=%d, pData=0x%x\n", 
+                        commandStatus, pRxCurrDesc->byteCnt, pRxCurrDesc->bufPtr);
+#endif /* ETH_DEBUG */
+
+            /* move buffer from pCurrentDescr position to pUsedDescr position */
+            pRxUsedDesc->bufPtr     = pRxCurrDesc->bufPtr;
+            pRxUsedDesc->returnInfo = pRxCurrDesc->returnInfo;
+            pRxUsedDesc->bufSize    = pRxCurrDesc->bufSize & ETH_RX_BUFFER_MASK;
+
+            /* Return the descriptor to DMA ownership */
+            pRxUsedDesc->cmdSts = ETH_BUFFER_OWNED_BY_DMA | 
+                                  ETH_RX_ENABLE_INTERRUPT_MASK;
+
+            /* Flush descriptor and CPU pipe */
+            ETH_DESCR_FLUSH_INV(pPortCtrl, pRxUsedDesc);
+
+            /* Move the used descriptor pointer to the next descriptor */
+            pQueueCtrl->pUsedDescr = RX_NEXT_DESC_PTR(pRxUsedDesc, pQueueCtrl);
+            pQueueCtrl->pCurrentDescr = RX_NEXT_DESC_PTR(pRxCurrDesc, pQueueCtrl);            
+        }
+    }
+}
+
+/*******************************************************************************
+* mvEthPortRxDone - Returns a Rx buffer back to the Rx ring.
+*
+* DESCRIPTION:
+*       This routine returns a Rx buffer back to the Rx ring. 
+*
+* INPUT:
+*       void*       pEthPortHndl    - Ethernet Port handler.
+*       int         rxQueue         - Number of Rx queue.
+*       MV_PKT_INFO *pPktInfo       - Pointer to received packet.
+*
+* RETURN:
+*       MV_ERROR        - Unexpected Fatal error.
+*       MV_OUT_OF_RANGE - RX queue is already FULL, so this buffer can't be 
+*                       returned to this queue.
+*       MV_FULL         - Buffer returned successfully and RX queue became full.
+*                       More buffers should not be returned at the time.
+*       MV_OK           - Buffer returned successfully and there are more free 
+*                       places in the queue.
+*
+*******************************************************************************/
+static INLINE MV_STATUS   mvEthPortRxDone(void* pEthPortHndl, int rxQueue, MV_PKT_INFO *pPktInfo)
+{
+    ETH_RX_DESC*    pRxUsedDesc;
+    ETH_QUEUE_CTRL* pQueueCtrl;
+    ETH_PORT_CTRL*  pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl;
+            
+    pQueueCtrl = &pPortCtrl->rxQueue[rxQueue];
+
+    /* Get 'used' Rx descriptor */
+    pRxUsedDesc = pQueueCtrl->pUsedDescr;
+
+    /* Check that ring is not FULL */
+    if( (pQueueCtrl->pUsedDescr == pQueueCtrl->pCurrentDescr) && 
+        (pQueueCtrl->resource != 0) )
+    {
+        mvOsPrintf("%s %d: out of range Error resource=%d, curr=%p, used=%p\n", 
+                    __FUNCTION__, pPortCtrl->portNo, pQueueCtrl->resource, 
+                    pQueueCtrl->pCurrentDescr, pQueueCtrl->pUsedDescr);
+        return MV_OUT_OF_RANGE;
+    }
+
+    pRxUsedDesc->bufPtr     = pPktInfo->pFrags->bufPhysAddr;
+    pRxUsedDesc->returnInfo = (MV_ULONG)pPktInfo;
+    pRxUsedDesc->bufSize    = pPktInfo->pFrags->bufSize & ETH_RX_BUFFER_MASK;
+
+    /* Invalidate data buffer accordingly with pktSize */
+    if(pPktInfo->pktSize != 0)
+    {
+        ETH_PACKET_CACHE_INVALIDATE(pPktInfo->pFrags->bufVirtPtr, pPktInfo->pktSize);
+        pPktInfo->pktSize = 0;
+    }
+
+    /* Return the descriptor to DMA ownership */
+    pRxUsedDesc->cmdSts = ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT_MASK;
+
+    /* Flush descriptor and CPU pipe */
+    ETH_DESCR_FLUSH_INV(pPortCtrl, pRxUsedDesc);
+
+    pQueueCtrl->resource++;
+
+    /* Move the used descriptor pointer to the next descriptor */
+    pQueueCtrl->pUsedDescr = RX_NEXT_DESC_PTR(pRxUsedDesc, pQueueCtrl);
+    
+    /* If ring became Full return MV_FULL */
+    if(pQueueCtrl->pUsedDescr == pQueueCtrl->pCurrentDescr) 
+        return MV_FULL;
+
+    return MV_OK;
+}
+
+
+#endif /* __mvEthGbe_h__ */
+
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthRegs.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthRegs.h
new file mode 100644
index 0000000000..7b9f0520fb
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthRegs.h
@@ -0,0 +1,700 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+        this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCmvEthRegsh
+#define __INCmvEthRegsh
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+#include "ctrlEnv/mvCtrlEnvSpec.h"
+
+/****************************************/
+/*        Ethernet Unit Registers       */
+/****************************************/
+#define ETH_REG_BASE 					MV_ETH_REG_BASE
+
+#define ETH_PHY_ADDR_REG(port)              (ETH_REG_BASE(port) + 0x000)
+#define ETH_SMI_REG(port)                   (ETH_REG_BASE(port) + 0x004)
+#define ETH_UNIT_DEF_ADDR_REG(port)         (ETH_REG_BASE(port) + 0x008)
+#define ETH_UNIT_DEF_ID_REG(port)           (ETH_REG_BASE(port) + 0x00c)
+#define ETH_UNIT_RESERVED(port)             (ETH_REG_BASE(port) + 0x014)
+#define ETH_UNIT_INTR_CAUSE_REG(port)       (ETH_REG_BASE(port) + 0x080)
+#define ETH_UNIT_INTR_MASK_REG(port)        (ETH_REG_BASE(port) + 0x084)
+
+
+#define ETH_UNIT_ERROR_ADDR_REG(port)       (ETH_REG_BASE(port) + 0x094)
+#define ETH_UNIT_INT_ADDR_ERROR_REG(port)   (ETH_REG_BASE(port) + 0x098)
+#define ETH_UNIT_CONTROL_REG(port)          (ETH_REG_BASE(port) + 0x0B0)
+
+#define ETH_PORT_CONFIG_REG(port)           (ETH_REG_BASE(port) + 0x400)
+#define ETH_PORT_CONFIG_EXTEND_REG(port)    (ETH_REG_BASE(port) + 0x404)
+#define ETH_MII_SERIAL_PARAM_REG(port)      (ETH_REG_BASE(port) + 0x408)
+#define ETH_GMII_SERIAL_PARAM_REG(port)     (ETH_REG_BASE(port) + 0x40c)
+#define ETH_VLAN_ETHER_TYPE_REG(port)       (ETH_REG_BASE(port) + 0x410)
+#define ETH_MAC_ADDR_LOW_REG(port)          (ETH_REG_BASE(port) + 0x414)
+#define ETH_MAC_ADDR_HIGH_REG(port)         (ETH_REG_BASE(port) + 0x418)
+#define ETH_SDMA_CONFIG_REG(port)           (ETH_REG_BASE(port) + 0x41c)
+#define ETH_DIFF_SERV_PRIO_REG(port, code)  (ETH_REG_BASE(port) + 0x420  + ((code)<<2))
+#define ETH_PORT_SERIAL_CTRL_REG(port)      (ETH_REG_BASE(port) + 0x43c)
+#define ETH_VLAN_TAG_TO_PRIO_REG(port)      (ETH_REG_BASE(port) + 0x440)
+#define ETH_PORT_STATUS_REG(port)           (ETH_REG_BASE(port) + 0x444)
+
+#define ETH_RX_QUEUE_COMMAND_REG(port)      (ETH_REG_BASE(port) + 0x680)
+#define ETH_TX_QUEUE_COMMAND_REG(port)      (ETH_REG_BASE(port) + 0x448)
+
+#define ETH_PORT_SERIAL_CTRL_1_REG(port)    (ETH_REG_BASE(port) + 0x44c)
+#define ETH_PORT_STATUS_1_REG(port)         (ETH_REG_BASE(port) + 0x450)
+#define ETH_PORT_MARVELL_HEADER_REG(port)   (ETH_REG_BASE(port) + 0x454)
+#define ETH_PORT_FIFO_PARAMS_REG(port)      (ETH_REG_BASE(port) + 0x458)
+#define ETH_MAX_TOKEN_BUCKET_SIZE_REG(port) (ETH_REG_BASE(port) + 0x45c)
+#define ETH_INTR_CAUSE_REG(port)            (ETH_REG_BASE(port) + 0x460)
+#define ETH_INTR_CAUSE_EXT_REG(port)        (ETH_REG_BASE(port) + 0x464)
+#define ETH_INTR_MASK_REG(port)             (ETH_REG_BASE(port) + 0x468)
+#define ETH_INTR_MASK_EXT_REG(port)         (ETH_REG_BASE(port) + 0x46c)
+#define ETH_TX_FIFO_URGENT_THRESH_REG(port) (ETH_REG_BASE(port) + 0x474)
+#define ETH_RX_MINIMAL_FRAME_SIZE_REG(port) (ETH_REG_BASE(port) + 0x47c)
+#define ETH_RX_DISCARD_PKTS_CNTR_REG(port)  (ETH_REG_BASE(port) + 0x484)
+#define ETH_RX_OVERRUN_PKTS_CNTR_REG(port)  (ETH_REG_BASE(port) + 0x488)
+#define ETH_INTERNAL_ADDR_ERROR_REG(port)   (ETH_REG_BASE(port) + 0x494)
+#define ETH_TX_FIXED_PRIO_CFG_REG(port)     (ETH_REG_BASE(port) + 0x4dc)
+#define ETH_TX_TOKEN_RATE_CFG_REG(port)     (ETH_REG_BASE(port) + 0x4e0)
+#define ETH_TX_QUEUE_COMMAND1_REG(port)     (ETH_REG_BASE(port) + 0x4e4)
+#define ETH_MAX_TRANSMIT_UNIT_REG(port)     (ETH_REG_BASE(port) + 0x4e8)
+#define ETH_TX_TOKEN_BUCKET_SIZE_REG(port)  (ETH_REG_BASE(port) + 0x4ec)
+#define ETH_TX_TOKEN_BUCKET_COUNT_REG(port) (ETH_REG_BASE(port) + 0x780)
+#define ETH_RX_DESCR_STAT_CMD_REG(port, q)  (ETH_REG_BASE(port) + 0x600 + ((q)<<4))
+#define ETH_RX_BYTE_COUNT_REG(port, q)      (ETH_REG_BASE(port) + 0x604 + ((q)<<4))
+#define ETH_RX_BUF_PTR_REG(port, q)         (ETH_REG_BASE(port) + 0x608 + ((q)<<4))
+#define ETH_RX_CUR_DESC_PTR_REG(port, q)    (ETH_REG_BASE(port) + 0x60c + ((q)<<4))
+#define ETH_TX_CUR_DESC_PTR_REG(port, q)    (ETH_REG_BASE(port) + 0x6c0 + ((q)<<2))
+
+#define ETH_TXQ_TOKEN_COUNT_REG(port, q)    (ETH_REG_BASE(port) + 0x700 + ((q)<<4))
+#define ETH_TXQ_TOKEN_CFG_REG(port, q)      (ETH_REG_BASE(port) + 0x704 + ((q)<<4))
+#define ETH_TXQ_ARBITER_CFG_REG(port, q)    (ETH_REG_BASE(port) + 0x708 + ((q)<<4))
+
+#if (MV_ETH_VERSION >= 4) 
+#define ETH_TXQ_CMD_1_REG(port)             (ETH_REG_BASE(port) + 0x4E4)
+#define ETH_EJP_TX_HI_IPG_REG(port)         (ETH_REG_BASE(port) + 0x7A8)
+#define ETH_EJP_TX_LO_IPG_REG(port)         (ETH_REG_BASE(port) + 0x7B8)
+#define ETH_EJP_HI_TKN_LO_PKT_REG(port)     (ETH_REG_BASE(port) + 0x7C0)
+#define ETH_EJP_HI_TKN_ASYNC_PKT_REG(port)  (ETH_REG_BASE(port) + 0x7C4)
+#define ETH_EJP_LO_TKN_ASYNC_PKT_REG(port)  (ETH_REG_BASE(port) + 0x7C8)
+#define ETH_EJP_TX_SPEED_REG(port)          (ETH_REG_BASE(port) + 0x7D0)
+#endif /* MV_ETH_VERSION >= 4 */
+
+#define ETH_MIB_COUNTERS_BASE(port)         (ETH_REG_BASE(port) + 0x1000)
+#define ETH_DA_FILTER_SPEC_MCAST_BASE(port) (ETH_REG_BASE(port) + 0x1400)
+#define ETH_DA_FILTER_OTH_MCAST_BASE(port)  (ETH_REG_BASE(port) + 0x1500)
+#define ETH_DA_FILTER_UCAST_BASE(port)      (ETH_REG_BASE(port) + 0x1600)
+
+/* Phy address register definitions */
+#define ETH_PHY_ADDR_OFFS          0                                       
+#define ETH_PHY_ADDR_MASK          (0x1f <<ETH_PHY_ADDR_OFFS)
+                                 
+/* MIB Counters register definitions */
+#define ETH_MIB_GOOD_OCTETS_RECEIVED_LOW    0x0
+#define ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH   0x4
+#define ETH_MIB_BAD_OCTETS_RECEIVED         0x8
+#define ETH_MIB_INTERNAL_MAC_TRANSMIT_ERR   0xc
+#define ETH_MIB_GOOD_FRAMES_RECEIVED        0x10
+#define ETH_MIB_BAD_FRAMES_RECEIVED         0x14
+#define ETH_MIB_BROADCAST_FRAMES_RECEIVED   0x18
+#define ETH_MIB_MULTICAST_FRAMES_RECEIVED   0x1c
+#define ETH_MIB_FRAMES_64_OCTETS            0x20
+#define ETH_MIB_FRAMES_65_TO_127_OCTETS     0x24
+#define ETH_MIB_FRAMES_128_TO_255_OCTETS    0x28
+#define ETH_MIB_FRAMES_256_TO_511_OCTETS    0x2c
+#define ETH_MIB_FRAMES_512_TO_1023_OCTETS   0x30
+#define ETH_MIB_FRAMES_1024_TO_MAX_OCTETS   0x34
+#define ETH_MIB_GOOD_OCTETS_SENT_LOW        0x38
+#define ETH_MIB_GOOD_OCTETS_SENT_HIGH       0x3c
+#define ETH_MIB_GOOD_FRAMES_SENT            0x40
+#define ETH_MIB_EXCESSIVE_COLLISION         0x44
+#define ETH_MIB_MULTICAST_FRAMES_SENT       0x48
+#define ETH_MIB_BROADCAST_FRAMES_SENT       0x4c
+#define ETH_MIB_UNREC_MAC_CONTROL_RECEIVED  0x50
+#define ETH_MIB_FC_SENT                     0x54
+#define ETH_MIB_GOOD_FC_RECEIVED            0x58
+#define ETH_MIB_BAD_FC_RECEIVED             0x5c
+#define ETH_MIB_UNDERSIZE_RECEIVED          0x60
+#define ETH_MIB_FRAGMENTS_RECEIVED          0x64
+#define ETH_MIB_OVERSIZE_RECEIVED           0x68
+#define ETH_MIB_JABBER_RECEIVED             0x6c
+#define ETH_MIB_MAC_RECEIVE_ERROR           0x70
+#define ETH_MIB_BAD_CRC_EVENT               0x74
+#define ETH_MIB_COLLISION                   0x78
+#define ETH_MIB_LATE_COLLISION              0x7c
+
+
+/****************************************/
+/*        Ethernet Unit Register BITs   */
+/****************************************/
+
+#define ETH_RXQ_ENABLE_OFFSET               0
+#define ETH_RXQ_ENABLE_MASK                 (0x000000FF << ETH_RXQ_ENABLE_OFFSET)
+
+#define ETH_RXQ_DISABLE_OFFSET              8
+#define ETH_RXQ_DISABLE_MASK                (0x000000FF << ETH_RXQ_DISABLE_OFFSET)
+
+/***** BITs of Transmit Queue Command (TQC) register *****/
+#define ETH_TXQ_ENABLE_OFFSET               0
+#define ETH_TXQ_ENABLE_MASK                 (0x000000FF << ETH_TXQ_ENABLE_OFFSET)
+
+#define ETH_TXQ_DISABLE_OFFSET              8
+#define ETH_TXQ_DISABLE_MASK                (0x000000FF << ETH_TXQ_DISABLE_OFFSET)
+
+#if (MV_ETH_VERSION >= 4) 
+#define ETH_TX_EJP_RESET_BIT                0
+#define ETH_TX_EJP_RESET_MASK               (1 << ETH_TX_EJP_RESET_BIT)
+
+#define ETH_TX_EJP_ENABLE_BIT               2
+#define ETH_TX_EJP_ENABLE_MASK              (1 << ETH_TX_EJP_ENABLE_BIT)
+
+#define ETH_TX_LEGACY_WRR_BIT               3
+#define ETH_TX_LEGACY_WRR_MASK              (1 << ETH_TX_LEGACY_WRR_BIT)
+#endif /* (MV_ETH_VERSION >= 4) */
+
+/***** BITs of Ethernet Port Status reg (PSR) *****/
+#define ETH_LINK_UP_BIT                     1
+#define ETH_LINK_UP_MASK                    (1<<ETH_LINK_UP_BIT)
+                     
+#define ETH_FULL_DUPLEX_BIT                 2
+#define ETH_FULL_DUPLEX_MASK                (1<<ETH_FULL_DUPLEX_BIT)
+
+#define ETH_ENABLE_RCV_FLOW_CTRL_BIT        3
+#define ETH_ENABLE_RCV_FLOW_CTRL_MASK       (1<<ETH_ENABLE_RCV_FLOW_CTRL_BIT)
+
+#define ETH_GMII_SPEED_1000_BIT             4
+#define ETH_GMII_SPEED_1000_MASK            (1<<ETH_GMII_SPEED_1000_BIT)
+
+#define ETH_MII_SPEED_100_BIT               5
+#define ETH_MII_SPEED_100_MASK              (1<<ETH_MII_SPEED_100_BIT)
+
+#define ETH_TX_IN_PROGRESS_BIT              7
+#define ETH_TX_IN_PROGRESS_MASK             (1<<ETH_TX_IN_PROGRESS_BIT)
+
+#define ETH_TX_FIFO_EMPTY_BIT               10
+#define ETH_TX_FIFO_EMPTY_MASK              (1<<ETH_TX_FIFO_EMPTY_BIT)
+
+/***** BITs of Ethernet Port Status 1 reg (PS1R) *****/
+#define ETH_AUTO_NEG_DONE_BIT               4
+#define ETH_AUTO_NEG_DONE_MASK              (1<<ETH_AUTO_NEG_DONE_BIT)
+
+#define ETH_SERDES_PLL_LOCKED_BIT           6
+#define ETH_SERDES_PLL_LOCKED_MASK          (1<<ETH_SERDES_PLL_LOCKED_BIT)
+
+/***** BITs of Port Configuration reg (PxCR) *****/
+#define ETH_UNICAST_PROMISCUOUS_MODE_BIT    0
+#define ETH_UNICAST_PROMISCUOUS_MODE_MASK   (1<<ETH_UNICAST_PROMISCUOUS_MODE_BIT)
+
+#define ETH_DEF_RX_QUEUE_OFFSET             1
+#define ETH_DEF_RX_QUEUE_ALL_MASK           (0x7<<ETH_DEF_RX_QUEUE_OFFSET)
+#define ETH_DEF_RX_QUEUE_MASK(queue)        ((queue)<<ETH_DEF_RX_QUEUE_OFFSET)
+
+#define ETH_DEF_RX_ARP_QUEUE_OFFSET         4
+#define ETH_DEF_RX_ARP_QUEUE_ALL_MASK       (0x7<<ETH_DEF_RX_ARP_QUEUE_OFFSET)
+#define ETH_DEF_RX_ARP_QUEUE_MASK(queue)    ((queue)<<ETH_DEF_RX_ARP_QUEUE_OFFSET)
+
+#define ETH_REJECT_NOT_IP_ARP_BCAST_BIT     7
+#define ETH_REJECT_NOT_IP_ARP_BCAST_MASK    (1<<ETH_REJECT_NOT_IP_ARP_BCAST_BIT)
+
+#define ETH_REJECT_IP_BCAST_BIT             8
+#define ETH_REJECT_IP_BCAST_MASK            (1<<ETH_REJECT_IP_BCAST_BIT)
+
+#define ETH_REJECT_ARP_BCAST_BIT            9
+#define ETH_REJECT_ARP_BCAST_MASK           (1<<ETH_REJECT_ARP_BCAST_BIT)
+
+#define ETH_TX_NO_SET_ERROR_SUMMARY_BIT     12
+#define ETH_TX_NO_SET_ERROR_SUMMARY_MASK    (1<<ETH_TX_NO_SET_ERROR_SUMMARY_BIT)
+
+#define ETH_CAPTURE_TCP_FRAMES_ENABLE_BIT   14
+#define ETH_CAPTURE_TCP_FRAMES_ENABLE_MASK  (1<<ETH_CAPTURE_TCP_FRAMES_ENABLE_BIT)
+
+#define ETH_CAPTURE_UDP_FRAMES_ENABLE_BIT   15
+#define ETH_CAPTURE_UDP_FRAMES_ENABLE_MASK  (1<<ETH_CAPTURE_UDP_FRAMES_ENABLE_BIT)
+
+#define ETH_DEF_RX_TCP_QUEUE_OFFSET         16
+#define ETH_DEF_RX_TCP_QUEUE_ALL_MASK       (0x7<<ETH_DEF_RX_TCP_QUEUE_OFFSET)
+#define ETH_DEF_RX_TCP_QUEUE_MASK(queue)    ((queue)<<ETH_DEF_RX_TCP_QUEUE_OFFSET)
+
+#define ETH_DEF_RX_UDP_QUEUE_OFFSET         19
+#define ETH_DEF_RX_UDP_QUEUE_ALL_MASK       (0x7<<ETH_DEF_RX_UDP_QUEUE_OFFSET)
+#define ETH_DEF_RX_UDP_QUEUE_MASK(queue)    ((queue)<<ETH_DEF_RX_UDP_QUEUE_OFFSET)
+
+#define ETH_DEF_RX_BPDU_QUEUE_OFFSET        22
+#define ETH_DEF_RX_BPDU_QUEUE_ALL_MASK      (0x7<<ETH_DEF_RX_BPDU_QUEUE_OFFSET)
+#define ETH_DEF_RX_BPDU_QUEUE_MASK(queue)   ((queue)<<ETH_DEF_RX_BPDU_QUEUE_OFFSET)
+
+#define ETH_RX_CHECKSUM_MODE_OFFSET         25
+#define ETH_RX_CHECKSUM_NO_PSEUDO_HDR       (0<<ETH_RX_CHECKSUM_MODE_OFFSET)
+#define ETH_RX_CHECKSUM_WITH_PSEUDO_HDR     (1<<ETH_RX_CHECKSUM_MODE_OFFSET)
+
+/***** BITs of Port Configuration Extend reg (PxCXR) *****/
+#define ETH_CAPTURE_SPAN_BPDU_ENABLE_BIT    1
+#define ETH_CAPTURE_SPAN_BPDU_ENABLE_MASK   (1<<ETH_CAPTURE_SPAN_BPDU_ENABLE_BIT)
+
+#define ETH_TX_DISABLE_GEN_CRC_BIT          3
+#define ETH_TX_DISABLE_GEN_CRC_MASK         (1<<ETH_TX_DISABLE_GEN_CRC_BIT)
+
+/***** BITs of Tx/Rx queue command reg (RQCR/TQCR) *****/
+#define ETH_QUEUE_ENABLE_OFFSET             0
+#define ETH_QUEUE_ENABLE_ALL_MASK           (0xFF<<ETH_QUEUE_ENABLE_OFFSET)
+#define ETH_QUEUE_ENABLE_MASK(queue)        (1<<((queue)+ETH_QUEUE_ENABLE_OFFSET))
+
+#define ETH_QUEUE_DISABLE_OFFSET            8 
+#define ETH_QUEUE_DISABLE_ALL_MASK          (0xFF<<ETH_QUEUE_DISABLE_OFFSET)
+#define ETH_QUEUE_DISABLE_MASK(queue)       (1<<((queue)+ETH_QUEUE_DISABLE_OFFSET))
+
+
+/***** BITs of Port Sdma Configuration reg (SDCR) *****/
+#define ETH_RX_FRAME_INTERRUPT_BIT          0
+#define ETH_RX_FRAME_INTERRUPT_MASK         (1<<ETH_RX_FRAME_INTERRUPT_BIT)
+
+#define ETH_BURST_SIZE_1_64BIT_VALUE        0   
+#define ETH_BURST_SIZE_2_64BIT_VALUE        1
+#define ETH_BURST_SIZE_4_64BIT_VALUE        2
+#define ETH_BURST_SIZE_8_64BIT_VALUE        3
+#define ETH_BURST_SIZE_16_64BIT_VALUE       4
+
+#define ETH_RX_BURST_SIZE_OFFSET            1
+#define ETH_RX_BURST_SIZE_ALL_MASK          (0x7<<ETH_RX_BURST_SIZE_OFFSET)
+#define ETH_RX_BURST_SIZE_MASK(burst)       ((burst)<<ETH_RX_BURST_SIZE_OFFSET)
+
+#define ETH_RX_NO_DATA_SWAP_BIT             4
+#define ETH_RX_NO_DATA_SWAP_MASK            (1<<ETH_RX_NO_DATA_SWAP_BIT)
+#define ETH_RX_DATA_SWAP_MASK               (0<<ETH_RX_NO_DATA_SWAP_BIT)
+
+#define ETH_TX_NO_DATA_SWAP_BIT             5
+#define ETH_TX_NO_DATA_SWAP_MASK            (1<<ETH_TX_NO_DATA_SWAP_BIT)
+#define ETH_TX_DATA_SWAP_MASK               (0<<ETH_TX_NO_DATA_SWAP_BIT)
+
+#define ETH_DESC_SWAP_BIT                   6
+#define ETH_DESC_SWAP_MASK                  (1<<ETH_DESC_SWAP_BIT)
+#define ETH_NO_DESC_SWAP_MASK               (0<<ETH_DESC_SWAP_BIT)
+
+#define ETH_RX_INTR_COAL_OFFSET             7
+#define ETH_RX_INTR_COAL_ALL_MASK           (0x3fff<<ETH_RX_INTR_COAL_OFFSET)
+#define ETH_RX_INTR_COAL_MASK(value)        (((value)<<ETH_RX_INTR_COAL_OFFSET)  \
+                                             & ETH_RX_INTR_COAL_ALL_MASK)
+
+#define ETH_TX_BURST_SIZE_OFFSET            22
+#define ETH_TX_BURST_SIZE_ALL_MASK          (0x7<<ETH_TX_BURST_SIZE_OFFSET)
+#define ETH_TX_BURST_SIZE_MASK(burst)       ((burst)<<ETH_TX_BURST_SIZE_OFFSET)
+
+#define ETH_RX_INTR_COAL_MSB_BIT            25
+#define ETH_RX_INTR_COAL_MSB_MASK           (1<<ETH_RX_INTR_COAL_MSB_BIT)  
+
+/* BITs Port #x Tx FIFO Urgent Threshold (PxTFUT) */
+#define ETH_TX_INTR_COAL_OFFSET             4
+#define ETH_TX_INTR_COAL_ALL_MASK           (0x3fff << ETH_TX_INTR_COAL_OFFSET)
+#define ETH_TX_INTR_COAL_MASK(value)        (((value) << ETH_TX_INTR_COAL_OFFSET)  \
+                                             & ETH_TX_INTR_COAL_ALL_MASK)
+
+/* BITs of Port Serial Control reg (PSCR) */
+#define ETH_PORT_ENABLE_BIT                 0
+#define ETH_PORT_ENABLE_MASK                (1<<ETH_PORT_ENABLE_BIT)
+
+#define ETH_FORCE_LINK_PASS_BIT             1
+#define ETH_FORCE_LINK_PASS_MASK            (1<<ETH_FORCE_LINK_PASS_BIT)
+
+#define ETH_DISABLE_DUPLEX_AUTO_NEG_BIT     2
+#define ETH_DISABLE_DUPLEX_AUTO_NEG_MASK    (1<<ETH_DISABLE_DUPLEX_AUTO_NEG_BIT)
+
+#define ETH_DISABLE_FC_AUTO_NEG_BIT         3
+#define ETH_DISABLE_FC_AUTO_NEG_MASK        (1<<ETH_DISABLE_FC_AUTO_NEG_BIT)
+
+#define ETH_ADVERTISE_SYM_FC_BIT            4
+#define ETH_ADVERTISE_SYM_FC_MASK           (1<<ETH_ADVERTISE_SYM_FC_BIT)
+
+#define ETH_TX_FC_MODE_OFFSET               5
+#define ETH_TX_FC_MODE_MASK                 (3<<ETH_TX_FC_MODE_OFFSET)
+#define ETH_TX_FC_NO_PAUSE                  (0<<ETH_TX_FC_MODE_OFFSET)
+#define ETH_TX_FC_SEND_PAUSE                (1<<ETH_TX_FC_MODE_OFFSET)
+
+#define ETH_TX_BP_MODE_OFFSET               7
+#define ETH_TX_BP_MODE_MASK                 (3<<ETH_TX_BP_MODE_OFFSET)
+#define ETH_TX_BP_NO_JAM                    (0<<ETH_TX_BP_MODE_OFFSET)
+#define ETH_TX_BP_SEND_JAM                  (1<<ETH_TX_BP_MODE_OFFSET)
+
+#define ETH_DO_NOT_FORCE_LINK_FAIL_BIT      10
+#define ETH_DO_NOT_FORCE_LINK_FAIL_MASK     (1<<ETH_DO_NOT_FORCE_LINK_FAIL_BIT)
+
+#define ETH_RETRANSMIT_FOREVER_BIT          11
+#define ETH_RETRANSMIT_FOREVER_MASK         (1<<ETH_RETRANSMIT_FOREVER_BIT)
+
+#define ETH_DISABLE_SPEED_AUTO_NEG_BIT      13
+#define ETH_DISABLE_SPEED_AUTO_NEG_MASK     (1<<ETH_DISABLE_SPEED_AUTO_NEG_BIT)
+
+#define ETH_DTE_ADVERT_BIT                  14    
+#define ETH_DTE_ADVERT_MASK                 (1<<ETH_DTE_ADVERT_BIT)    
+
+#define ETH_MII_PHY_MODE_BIT                15  
+#define ETH_MII_PHY_MODE_MAC                (0<<ETH_MII_PHY_MODE_BIT)
+#define ETH_MII_PHY_MODE_PHY                (1<<ETH_MII_PHY_MODE_BIT)
+
+#define ETH_MII_SOURCE_SYNCH_BIT            16
+#define ETH_MII_STANDARD_SYNCH              (0<<ETH_MII_SOURCE_SYNCH_BIT)
+#define ETH_MII_400Mbps_SYNCH               (1<<ETH_MII_SOURCE_CLK_BIT)
+
+#define ETH_MAX_RX_PACKET_SIZE_OFFSET       17
+#define ETH_MAX_RX_PACKET_SIZE_MASK         (7<<ETH_MAX_RX_PACKET_SIZE_OFFSET)
+#define ETH_MAX_RX_PACKET_1518BYTE          (0<<ETH_MAX_RX_PACKET_SIZE_OFFSET)
+#define ETH_MAX_RX_PACKET_1522BYTE          (1<<ETH_MAX_RX_PACKET_SIZE_OFFSET)
+#define ETH_MAX_RX_PACKET_1552BYTE          (2<<ETH_MAX_RX_PACKET_SIZE_OFFSET)
+#define ETH_MAX_RX_PACKET_9022BYTE          (3<<ETH_MAX_RX_PACKET_SIZE_OFFSET)
+#define ETH_MAX_RX_PACKET_9192BYTE          (4<<ETH_MAX_RX_PACKET_SIZE_OFFSET)
+#define ETH_MAX_RX_PACKET_9700BYTE          (5<<ETH_MAX_RX_PACKET_SIZE_OFFSET)
+
+#define ETH_SET_FULL_DUPLEX_BIT             21
+#define ETH_SET_FULL_DUPLEX_MASK            (1<<ETH_SET_FULL_DUPLEX_BIT)
+
+#define ETH_SET_FLOW_CTRL_BIT               22
+#define ETH_SET_FLOW_CTRL_MASK              (1<<ETH_SET_FLOW_CTRL_BIT)
+
+#define ETH_SET_GMII_SPEED_1000_BIT         23
+#define ETH_SET_GMII_SPEED_1000_MASK        (1<<ETH_SET_GMII_SPEED_1000_BIT)
+
+#define ETH_SET_MII_SPEED_100_BIT           24
+#define ETH_SET_MII_SPEED_100_MASK          (1<<ETH_SET_MII_SPEED_100_BIT)
+
+/* BITs of Port Serial Control 1 reg (PSC1R) */
+#define ETH_PSC_ENABLE_BIT                  2
+#define ETH_PSC_ENABLE_MASK                 (1<<ETH_PSC_ENABLE_BIT)
+
+#define ETH_RGMII_ENABLE_BIT                3
+#define ETH_RGMII_ENABLE_MASK               (1<<ETH_RGMII_ENABLE_BIT)
+
+#define ETH_PORT_RESET_BIT                  4
+#define ETH_PORT_RESET_MASK                 (1<<ETH_PORT_RESET_BIT)
+
+#define ETH_INBAND_AUTO_NEG_ENABLE_BIT      6
+#define ETH_INBAND_AUTO_NEG_ENABLE_MASK     (1<<ETH_INBAND_AUTO_NEG_ENABLE_BIT)
+
+#define ETH_INBAND_AUTO_NEG_BYPASS_BIT      7
+#define ETH_INBAND_AUTO_NEG_BYPASS_MASK     (1<<ETH_INBAND_AUTO_NEG_BYPASS_BIT)
+
+#define ETH_INBAND_AUTO_NEG_START_BIT       8
+#define ETH_INBAND_AUTO_NEG_START_MASK      (1<<ETH_INBAND_AUTO_NEG_START_BIT)
+
+#define ETH_PORT_TYPE_BIT                   11
+#define ETH_PORT_TYPE_1000BasedX_MASK       (1<<ETH_PORT_TYPE_BIT)
+
+#define ETH_SGMII_MODE_BIT                  12
+#define ETH_1000BaseX_MODE_MASK             (0<<ETH_SGMII_MODE_BIT)
+#define ETH_SGMII_MODE_MASK                 (1<<ETH_SGMII_MODE_BIT)
+            
+#define ETH_MGMII_MODE_BIT                  13
+
+#define ETH_EN_MII_ODD_PRE_BIT		    22
+#define ETH_EN_MII_ODD_PRE_MASK		    (1<<ETH_EN_MII_ODD_PRE_BIT)
+
+/* BITs of SDMA Descriptor Command/Status field */
+#if defined(MV_CPU_BE)
+typedef struct _ethRxDesc
+{
+    MV_U16      byteCnt    ;    /* Descriptor buffer byte count     */
+    MV_U16      bufSize    ;    /* Buffer size                      */
+    MV_U32      cmdSts     ;    /* Descriptor command status        */
+    MV_U32      nextDescPtr;    /* Next descriptor pointer          */
+    MV_U32      bufPtr     ;    /* Descriptor buffer pointer        */
+    MV_ULONG    returnInfo ;    /* User resource return information */
+} ETH_RX_DESC;
+
+typedef struct _ethTxDesc
+{
+    MV_U16      byteCnt    ;    /* Descriptor buffer byte count     */
+    MV_U16      L4iChk     ;    /* CPU provided TCP Checksum        */
+    MV_U32      cmdSts     ;    /* Descriptor command status        */
+    MV_U32      nextDescPtr;    /* Next descriptor pointer          */
+    MV_U32      bufPtr     ;    /* Descriptor buffer pointer        */
+    MV_ULONG    returnInfo ;    /* User resource return information */
+    MV_U8*      alignBufPtr;    /* Pointer to 8 byte aligned buffer */
+} ETH_TX_DESC;
+
+#elif defined(MV_CPU_LE)
+
+typedef struct _ethRxDesc
+{
+    MV_U32      cmdSts     ;    /* Descriptor command status        */
+    MV_U16      bufSize    ;    /* Buffer size                      */
+    MV_U16      byteCnt    ;    /* Descriptor buffer byte count     */
+    MV_U32      bufPtr     ;    /* Descriptor buffer pointer        */
+    MV_U32      nextDescPtr;    /* Next descriptor pointer          */
+    MV_ULONG    returnInfo ;    /* User resource return information */
+} ETH_RX_DESC;
+
+typedef struct _ethTxDesc
+{
+    MV_U32      cmdSts     ;    /* Descriptor command status        */
+    MV_U16      L4iChk     ;    /* CPU provided TCP Checksum        */
+    MV_U16      byteCnt    ;    /* Descriptor buffer byte count     */
+    MV_U32      bufPtr     ;    /* Descriptor buffer pointer        */
+    MV_U32      nextDescPtr;    /* Next descriptor pointer          */
+    MV_ULONG    returnInfo ;    /* User resource return information */
+    MV_U8*      alignBufPtr;    /* Pointer to 32 byte aligned buffer */
+} ETH_TX_DESC;
+
+#else
+#error "MV_CPU_BE or MV_CPU_LE must be defined"
+#endif /* MV_CPU_BE || MV_CPU_LE */
+
+/* Buffer offset from buffer pointer */
+#define ETH_RX_BUF_OFFSET               0x2
+
+
+/* Tx & Rx descriptor bits */
+#define ETH_ERROR_SUMMARY_BIT               0
+#define ETH_ERROR_SUMMARY_MASK              (1<<ETH_ERROR_SUMMARY_BIT)
+
+#define ETH_BUFFER_OWNER_BIT                31             
+#define ETH_BUFFER_OWNED_BY_DMA             (1<<ETH_BUFFER_OWNER_BIT)
+#define ETH_BUFFER_OWNED_BY_HOST            (0<<ETH_BUFFER_OWNER_BIT)
+
+/* Tx descriptor bits */
+#define ETH_TX_ERROR_CODE_OFFSET            1
+#define ETH_TX_ERROR_CODE_MASK              (3<<ETH_TX_ERROR_CODE_OFFSET)
+#define ETH_TX_LATE_COLLISION_ERROR         (0<<ETH_TX_ERROR_CODE_OFFSET)
+#define ETH_TX_UNDERRUN_ERROR               (1<<ETH_TX_ERROR_CODE_OFFSET)
+#define ETH_TX_EXCESSIVE_COLLISION_ERROR    (2<<ETH_TX_ERROR_CODE_OFFSET)
+
+#define ETH_TX_LLC_SNAP_FORMAT_BIT          9
+#define ETH_TX_LLC_SNAP_FORMAT_MASK         (1<<ETH_TX_LLC_SNAP_FORMAT_BIT)
+
+#define ETH_TX_IP_FRAG_BIT                  10
+#define ETH_TX_IP_FRAG_MASK                 (1<<ETH_TX_IP_FRAG_BIT)
+#define ETH_TX_IP_FRAG                      (0<<ETH_TX_IP_FRAG_BIT)
+#define ETH_TX_IP_NO_FRAG                   (1<<ETH_TX_IP_FRAG_BIT)
+
+#define ETH_TX_IP_HEADER_LEN_OFFSET         11
+#define ETH_TX_IP_HEADER_LEN_ALL_MASK       (0xF<<ETH_TX_IP_HEADER_LEN_OFFSET)
+#define ETH_TX_IP_HEADER_LEN_MASK(len)      ((len)<<ETH_TX_IP_HEADER_LEN_OFFSET)
+
+#define ETH_TX_VLAN_TAGGED_FRAME_BIT        15
+#define ETH_TX_VLAN_TAGGED_FRAME_MASK       (1<<ETH_TX_VLAN_TAGGED_FRAME_BIT)
+
+#define ETH_TX_L4_TYPE_BIT                  16
+#define ETH_TX_L4_TCP_TYPE                  (0<<ETH_TX_L4_TYPE_BIT)
+#define ETH_TX_L4_UDP_TYPE                  (1<<ETH_TX_L4_TYPE_BIT)
+
+#define ETH_TX_GENERATE_L4_CHKSUM_BIT       17
+#define ETH_TX_GENERATE_L4_CHKSUM_MASK      (1<<ETH_TX_GENERATE_L4_CHKSUM_BIT)
+
+#define ETH_TX_GENERATE_IP_CHKSUM_BIT       18
+#define ETH_TX_GENERATE_IP_CHKSUM_MASK      (1<<ETH_TX_GENERATE_IP_CHKSUM_BIT)
+
+#define ETH_TX_ZERO_PADDING_BIT             19
+#define ETH_TX_ZERO_PADDING_MASK            (1<<ETH_TX_ZERO_PADDING_BIT)
+
+#define ETH_TX_LAST_DESC_BIT                20
+#define ETH_TX_LAST_DESC_MASK               (1<<ETH_TX_LAST_DESC_BIT)
+
+#define ETH_TX_FIRST_DESC_BIT               21
+#define ETH_TX_FIRST_DESC_MASK              (1<<ETH_TX_FIRST_DESC_BIT)
+
+#define ETH_TX_GENERATE_CRC_BIT             22
+#define ETH_TX_GENERATE_CRC_MASK            (1<<ETH_TX_GENERATE_CRC_BIT)
+
+#define ETH_TX_ENABLE_INTERRUPT_BIT         23
+#define ETH_TX_ENABLE_INTERRUPT_MASK        (1<<ETH_TX_ENABLE_INTERRUPT_BIT)
+
+#define ETH_TX_AUTO_MODE_BIT                30
+#define ETH_TX_AUTO_MODE_MASK               (1<<ETH_TX_AUTO_MODE_BIT)
+
+
+/* Rx descriptor bits */
+#define ETH_RX_ERROR_CODE_OFFSET            1
+#define ETH_RX_ERROR_CODE_MASK              (3<<ETH_RX_ERROR_CODE_OFFSET)
+#define ETH_RX_CRC_ERROR                    (0<<ETH_RX_ERROR_CODE_OFFSET)
+#define ETH_RX_OVERRUN_ERROR                (1<<ETH_RX_ERROR_CODE_OFFSET)
+#define ETH_RX_MAX_FRAME_LEN_ERROR          (2<<ETH_RX_ERROR_CODE_OFFSET)
+#define ETH_RX_RESOURCE_ERROR               (3<<ETH_RX_ERROR_CODE_OFFSET)
+
+#define ETH_RX_L4_CHECKSUM_OFFSET           3
+#define ETH_RX_L4_CHECKSUM_MASK             (0xffff<<ETH_RX_L4_CHECKSUM_OFFSET)
+
+#define ETH_RX_VLAN_TAGGED_FRAME_BIT        19
+#define ETH_RX_VLAN_TAGGED_FRAME_MASK       (1<<ETH_RX_VLAN_TAGGED_FRAME_BIT)
+
+#define ETH_RX_BPDU_FRAME_BIT               20
+#define ETH_RX_BPDU_FRAME_MASK              (1<<ETH_RX_BPDU_FRAME_BIT)
+
+#define ETH_RX_L4_TYPE_OFFSET               21
+#define ETH_RX_L4_TYPE_MASK                 (3<<ETH_RX_L4_TYPE_OFFSET)
+#define ETH_RX_L4_TCP_TYPE                  (0<<ETH_RX_L4_TYPE_OFFSET)
+#define ETH_RX_L4_UDP_TYPE                  (1<<ETH_RX_L4_TYPE_OFFSET)
+#define ETH_RX_L4_OTHER_TYPE                (2<<ETH_RX_L4_TYPE_OFFSET)
+
+#define ETH_RX_NOT_LLC_SNAP_FORMAT_BIT      23
+#define ETH_RX_NOT_LLC_SNAP_FORMAT_MASK     (1<<ETH_RX_NOT_LLC_SNAP_FORMAT_BIT)
+
+#define ETH_RX_IP_FRAME_TYPE_BIT            24
+#define ETH_RX_IP_FRAME_TYPE_MASK           (1<<ETH_RX_IP_FRAME_TYPE_BIT)
+
+#define ETH_RX_IP_HEADER_OK_BIT             25
+#define ETH_RX_IP_HEADER_OK_MASK            (1<<ETH_RX_IP_HEADER_OK_BIT)
+
+#define ETH_RX_LAST_DESC_BIT                26
+#define ETH_RX_LAST_DESC_MASK               (1<<ETH_RX_LAST_DESC_BIT)
+
+#define ETH_RX_FIRST_DESC_BIT               27
+#define ETH_RX_FIRST_DESC_MASK              (1<<ETH_RX_FIRST_DESC_BIT)
+
+#define ETH_RX_UNKNOWN_DA_BIT               28
+#define ETH_RX_UNKNOWN_DA_MASK              (1<<ETH_RX_UNKNOWN_DA_BIT)
+
+#define ETH_RX_ENABLE_INTERRUPT_BIT         29
+#define ETH_RX_ENABLE_INTERRUPT_MASK        (1<<ETH_RX_ENABLE_INTERRUPT_BIT)
+
+#define ETH_RX_L4_CHECKSUM_OK_BIT           30
+#define ETH_RX_L4_CHECKSUM_OK_MASK          (1<<ETH_RX_L4_CHECKSUM_OK_BIT)
+
+/* Rx descriptor bufSize field */
+#define ETH_RX_IP_FRAGMENTED_FRAME_BIT      2
+#define ETH_RX_IP_FRAGMENTED_FRAME_MASK     (1<<ETH_RX_IP_FRAGMENTED_FRAME_BIT)
+
+#define ETH_RX_BUFFER_MASK                  0xFFF8
+
+
+/* Ethernet Cause Register BITs */
+#define ETH_CAUSE_RX_READY_SUM_BIT          0
+#define ETH_CAUSE_EXTEND_BIT                1
+
+#define ETH_CAUSE_RX_READY_OFFSET           2
+#define ETH_CAUSE_RX_READY_BIT(queue)       (ETH_CAUSE_RX_READY_OFFSET + (queue))
+#define ETH_CAUSE_RX_READY_MASK(queue)      (1 << (ETH_CAUSE_RX_READY_BIT(queue))) 
+
+#define ETH_CAUSE_RX_ERROR_SUM_BIT          10
+#define ETH_CAUSE_RX_ERROR_OFFSET           11
+#define ETH_CAUSE_RX_ERROR_BIT(queue)       (ETH_CAUSE_RX_ERROR_OFFSET + (queue))
+#define ETH_CAUSE_RX_ERROR_MASK(queue)      (1 << (ETH_CAUSE_RX_ERROR_BIT(queue))) 
+
+#define ETH_CAUSE_TX_END_BIT                19
+#define ETH_CAUSE_SUM_BIT                   31
+
+/* Ethernet Cause Extended Register BITs */
+#define ETH_CAUSE_TX_BUF_OFFSET             0
+#define ETH_CAUSE_TX_BUF_BIT(queue)         (ETH_CAUSE_TX_BUF_OFFSET + (queue))
+#define ETH_CAUSE_TX_BUF_MASK(queue)        (1 << (ETH_CAUSE_TX_BUF_BIT(queue)))
+         
+#define ETH_CAUSE_TX_ERROR_OFFSET           8
+#define ETH_CAUSE_TX_ERROR_BIT(queue)       (ETH_CAUSE_TX_ERROR_OFFSET + (queue))
+#define ETH_CAUSE_TX_ERROR_MASK(queue)      (1 << (ETH_CAUSE_TX_ERROR_BIT(queue)))
+
+#define ETH_CAUSE_PHY_STATUS_CHANGE_BIT     16
+#define ETH_CAUSE_RX_OVERRUN_BIT            18          
+#define ETH_CAUSE_TX_UNDERRUN_BIT           19
+#define ETH_CAUSE_LINK_STATE_CHANGE_BIT     20
+#define ETH_CAUSE_INTERNAL_ADDR_ERR_BIT     23
+#define ETH_CAUSE_EXTEND_SUM_BIT            31
+
+/* Marvell Header Register */
+/* Marvell Header register bits */
+#define ETH_MVHDR_EN_BIT                    0
+#define ETH_MVHDR_EN_MASK                   (1 << ETH_MVHDR_EN_BIT)
+
+#define ETH_MVHDR_DAPREFIX_BIT              1
+#define ETH_MVHDR_DAPREFIX_MASK             (0x3 << ETH_MVHDR_DAPREFIX_BIT)
+#define ETH_MVHDR_DAPREFIX_PRI_1_2          (0x1 << ETH_MVHDR_DAPREFIX_BIT)
+#define ETH_MVHDR_DAPREFIX_DBNUM_PRI        (0x2 << ETH_MVHDR_DAPREFIX_BIT)
+#define ETH_MVHDR_DAPREFIX_SPID_PRI         (0x3 << ETH_MVHDR_DAPREFIX_BIT)
+
+#define ETH_MVHDR_MHMASK_BIT                8
+#define ETH_MVHDR_MHMASK_MASK               (0x3 << ETH_MVHDR_MHMASK_BIT)
+#define ETH_MVHDR_MHMASK_8_QUEUE            (0x0 << ETH_MVHDR_MHMASK_BIT)
+#define ETH_MVHDR_MHMASK_4_QUEUE            (0x1 << ETH_MVHDR_MHMASK_BIT)
+#define ETH_MVHDR_MHMASK_2_QUEUE            (0x3 << ETH_MVHDR_MHMASK_BIT)
+
+
+/* Relevant for 6183 ONLY */
+#define ETH_UNIT_PORTS_PADS_CALIB_0_REG     (MV_ETH_REG_BASE(0) + 0x0A0)
+#define ETH_UNIT_PORTS_PADS_CALIB_1_REG     (MV_ETH_REG_BASE(0) + 0x0A4)
+#define ETH_UNIT_PORTS_PADS_CALIB_2_REG     (MV_ETH_REG_BASE(0) + 0x0A8)
+/* Ethernet Unit Ports Pads Calibration_REG (ETH_UNIT_PORTS_PADS_CALIB_x_REG)  */
+#define ETH_ETHERNET_PAD_CLIB_DRVN_OFFS		0
+#define ETH_ETHERNET_PAD_CLIB_DRVN_MASK		(0x1F << ETH_ETHERNET_PAD_CLIB_DRVN_OFFS)
+
+#define ETH_ETHERNET_PAD_CLIB_DRVP_OFFS         5                      
+#define ETH_ETHERNET_PAD_CLIB_DRVP_MASK         (0x1F << ETH_ETHERNET_PAD_CLIB_DRVP_OFFS)
+ 
+#define ETH_ETHERNET_PAD_CLIB_TUNEEN_OFFS       16                      
+#define ETH_ETHERNET_PAD_CLIB_TUNEEN_MASK       (0x1 << ETH_ETHERNET_PAD_CLIB_TUNEEN_OFFS) 
+
+#define ETH_ETHERNET_PAD_CLIB_LOCKN_OFFS        17                   
+#define ETH_ETHERNET_PAD_CLIB_LOCKN_MASK        (0x1F << ETH_ETHERNET_PAD_CLIB_LOCKN_OFFS) 
+
+#define ETH_ETHERNET_PAD_CLIB_OFFST_OFFS        24                   
+#define ETH_ETHERNET_PAD_CLIB_OFFST_MASK        (0x1F << ETH_ETHERNET_PAD_CLIB_OFFST_OFFS) 
+
+#define ETH_ETHERNET_PAD_CLIB_WR_EN_OFFS        31                   
+#define ETH_ETHERNET_PAD_CLIB_WR_EN_MASK        (0x1  << ETH_ETHERNET_PAD_CLIB_WR_EN_OFFS) 
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __INCmvEthRegsh */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/mvEth.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/mvEth.h
new file mode 100644
index 0000000000..c42ed1a657
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/mvEth.h
@@ -0,0 +1,356 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+/*******************************************************************************
+* mvEth.h - Header File for : Ethernet Controller 
+*
+* DESCRIPTION:
+*       This header file contains macros typedefs and function declaration for
+*       Marvell Gigabit Ethernet Controllers.
+*
+* DEPENDENCIES:
+*       None.
+*
+*******************************************************************************/
+
+#ifndef __mvEth_h__
+#define __mvEth_h__
+
+/* includes */
+#include "mvTypes.h"
+#include "mv802_3.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "ctrlEnv/mvCtrlEnvAddrDec.h"
+#include "eth/gbe/mvEthRegs.h"
+#include "mvSysHwConfig.h"
+
+/* defines  */
+
+#define MV_ETH_EXTRA_FRAGS_NUM      2
+
+
+typedef enum
+{
+    MV_ETH_SPEED_AN,
+    MV_ETH_SPEED_10,
+    MV_ETH_SPEED_100,
+    MV_ETH_SPEED_1000
+    
+} MV_ETH_PORT_SPEED;
+
+typedef enum
+{
+    MV_ETH_DUPLEX_AN,
+    MV_ETH_DUPLEX_HALF,
+    MV_ETH_DUPLEX_FULL
+    
+} MV_ETH_PORT_DUPLEX;
+
+typedef enum
+{
+    MV_ETH_FC_AN_ADV_DIS,
+    MV_ETH_FC_AN_ADV_SYM,
+    MV_ETH_FC_DISABLE,
+    MV_ETH_FC_ENABLE
+
+} MV_ETH_PORT_FC;
+
+typedef enum
+{
+    MV_ETH_PRIO_FIXED = 0,  /* Fixed priority mode */
+    MV_ETH_PRIO_WRR   = 1   /* Weighted round robin priority mode */    
+} MV_ETH_PRIO_MODE;
+
+/* Ethernet port specific infomation */
+typedef struct
+{
+    int     maxRxPktSize;
+    int     rxDefQ;
+    int     rxBpduQ;
+    int     rxArpQ;
+    int     rxTcpQ;
+    int     rxUdpQ;
+    int     ejpMode;
+} MV_ETH_PORT_CFG;
+
+typedef struct
+{
+    int     descrNum;
+} MV_ETH_RX_Q_CFG;
+
+typedef struct
+{
+    int         descrNum;
+    MV_ETH_PRIO_MODE    prioMode;
+    int         quota;
+} MV_ETH_TX_Q_CFG;
+
+typedef struct
+{
+    int     maxRxPktSize;
+    int     rxDefQ;
+    int     txDescrNum[MV_ETH_TX_Q_NUM];
+    int     rxDescrNum[MV_ETH_RX_Q_NUM];
+    void    *osHandle;
+} MV_ETH_PORT_INIT;
+
+typedef struct
+{
+    MV_BOOL             isLinkUp;
+    MV_ETH_PORT_SPEED   speed;
+    MV_ETH_PORT_DUPLEX  duplex;
+    MV_ETH_PORT_FC      flowControl;
+
+} MV_ETH_PORT_STATUS;
+
+typedef enum
+{
+	MV_ETH_DISABLE_HEADER_MODE = 0, 
+	MV_ETH_ENABLE_HEADER_MODE_PRI_2_1 = 1, 
+	MV_ETH_ENABLE_HEADER_MODE_PRI_DBNUM = 2, 
+	MV_ETH_ENABLE_HEADER_MODE_PRI_SPID = 3
+} MV_ETH_HEADER_MODE;
+
+
+/* ethernet.h API list */
+void        mvEthHalInit(void);
+void        mvEthMemAttrGet(MV_BOOL* pIsSram, MV_BOOL* pIsSwCoher);
+
+/* Port Initalization routines */
+void*       mvEthPortInit (int port, MV_ETH_PORT_INIT *pPortInit);
+void        ethResetTxDescRing(void* pPortHndl, int queue);
+void        ethResetRxDescRing(void* pPortHndl, int queue);
+
+void*       mvEthPortHndlGet(int port);
+
+void        mvEthPortFinish(void* pEthPortHndl);
+MV_STATUS   mvEthPortDown(void* pEthPortHndl);
+MV_STATUS   mvEthPortDisable(void* pEthPortHndl);
+MV_STATUS   mvEthPortUp(void* pEthPortHndl);
+MV_STATUS   mvEthPortEnable(void* pEthPortHndl);
+
+/* Port data flow routines */
+MV_PKT_INFO *mvEthPortForceTxDone(void* pEthPortHndl, int txQueue);
+MV_PKT_INFO *mvEthPortForceRx(void* pEthPortHndl, int rxQueue);
+
+/* Port Configuration routines */
+MV_STATUS   mvEthDefaultsSet(void* pEthPortHndl);
+MV_STATUS   mvEthMaxRxSizeSet(void* pPortHndl, int maxRxSize);
+
+/* Port RX MAC Filtering control routines */
+MV_U8       mvEthMcastCrc8Get(MV_U8* pAddr);
+MV_STATUS   mvEthRxFilterModeSet(void* pPortHndl, MV_BOOL isPromisc);
+MV_STATUS   mvEthMacAddrSet(void* pPortHandle, MV_U8* pMacAddr, int queue);
+MV_STATUS   mvEthMcastAddrSet(void* pPortHandle, MV_U8 *pAddr, int queue);
+
+/* MIB Counters APIs */
+MV_U32      mvEthMibCounterRead(void* pPortHndl, unsigned int mibOffset, 
+                               MV_U32* pHigh32);
+void        mvEthMibCountersClear(void* pPortHandle);
+
+/* TX Scheduling configuration routines */
+MV_STATUS   mvEthTxQueueConfig(void* pPortHandle, int txQueue,                          
+                               MV_ETH_PRIO_MODE txPrioMode, int txQuota);
+
+/* RX Dispatching configuration routines */
+MV_STATUS   mvEthBpduRxQueue(void* pPortHandle, int bpduQueue);
+MV_STATUS   mvEthVlanPrioRxQueue(void* pPortHandle, int vlanPrio, int vlanPrioQueue);
+MV_STATUS   mvEthTosToRxqSet(void* pPortHandle, int tos, int rxq);
+int         mvEthTosToRxqGet(void* pPortHandle, int tos);
+
+/* Speed, Duplex, FlowControl routines */
+MV_STATUS   mvEthSpeedDuplexSet(void* pPortHandle, MV_ETH_PORT_SPEED speed, 
+                                                   MV_ETH_PORT_DUPLEX duplex);
+
+MV_STATUS   mvEthFlowCtrlSet(void* pPortHandle, MV_ETH_PORT_FC flowControl);
+
+#if (MV_ETH_VERSION >= 4)
+MV_STATUS   mvEthEjpModeSet(void* pPortHandle, int mode);
+#endif /* (MV_ETH_VERSION >= 4) */
+
+void        mvEthStatusGet(void* pPortHandle, MV_ETH_PORT_STATUS* pStatus);
+
+/* Marvell Header control               */
+MV_STATUS   mvEthHeaderModeSet(void* pPortHandle, MV_ETH_HEADER_MODE headerMode);
+
+/* PHY routines */
+void       mvEthPhyAddrSet(void* pPortHandle, int phyAddr);
+int        mvEthPhyAddrGet(void* pPortHandle);
+
+/* Power management routines */
+void        mvEthPortPowerDown(int port);
+void        mvEthPortPowerUp(int port);
+
+/******************** ETH PRIVATE ************************/
+
+/*#define UNCACHED_TX_BUFFERS*/
+/*#define UNCACHED_RX_BUFFERS*/
+
+
+/* Port attributes */
+/* Size of a Tx/Rx descriptor used in chain list data structure */
+#define ETH_RX_DESC_ALIGNED_SIZE        32
+#define ETH_TX_DESC_ALIGNED_SIZE        32
+
+#define TX_DISABLE_TIMEOUT_MSEC     1000
+#define RX_DISABLE_TIMEOUT_MSEC     1000
+#define TX_FIFO_EMPTY_TIMEOUT_MSEC  10000
+#define PORT_DISABLE_WAIT_TCLOCKS   5000
+
+/* Macros that save access to desc in order to find next desc pointer  */
+#define RX_NEXT_DESC_PTR(pRxDescr, pQueueCtrl)                              \
+        ((pRxDescr) == (pQueueCtrl)->pLastDescr) ?                          \
+               (ETH_RX_DESC*)((pQueueCtrl)->pFirstDescr) :                  \
+               (ETH_RX_DESC*)(((MV_ULONG)(pRxDescr)) + ETH_RX_DESC_ALIGNED_SIZE)
+
+#define TX_NEXT_DESC_PTR(pTxDescr, pQueueCtrl)                              \
+        ((pTxDescr) == (pQueueCtrl)->pLastDescr) ?                          \
+               (ETH_TX_DESC*)((pQueueCtrl)->pFirstDescr) :                  \
+               (ETH_TX_DESC*)(((MV_ULONG)(pTxDescr)) + ETH_TX_DESC_ALIGNED_SIZE)
+
+#define RX_PREV_DESC_PTR(pRxDescr, pQueueCtrl)                              \
+        ((pRxDescr) == (pQueueCtrl)->pFirstDescr) ?                          \
+               (ETH_RX_DESC*)((pQueueCtrl)->pLastDescr) :                  \
+               (ETH_RX_DESC*)(((MV_ULONG)(pRxDescr)) - ETH_RX_DESC_ALIGNED_SIZE)
+
+#define TX_PREV_DESC_PTR(pTxDescr, pQueueCtrl)                              \
+        ((pTxDescr) == (pQueueCtrl)->pFirstDescr) ?                          \
+               (ETH_TX_DESC*)((pQueueCtrl)->pLastDescr) :                  \
+               (ETH_TX_DESC*)(((MV_ULONG)(pTxDescr)) - ETH_TX_DESC_ALIGNED_SIZE)
+
+
+/* Queue specific information */
+typedef struct 
+{
+    void*       pFirstDescr;
+    void*       pLastDescr;
+    void*       pCurrentDescr;
+    void*       pUsedDescr;
+    int         resource;
+    MV_BUF_INFO descBuf;
+} ETH_QUEUE_CTRL;
+
+
+/* Ethernet port specific infomation */
+typedef struct _ethPortCtrl
+{
+    int             portNo;
+    ETH_QUEUE_CTRL  rxQueue[MV_ETH_RX_Q_NUM]; /* Rx ring resource  */
+    ETH_QUEUE_CTRL  txQueue[MV_ETH_TX_Q_NUM]; /* Tx ring resource  */
+
+    MV_ETH_PORT_CFG portConfig;
+    MV_ETH_RX_Q_CFG rxQueueConfig[MV_ETH_RX_Q_NUM];
+    MV_ETH_TX_Q_CFG txQueueConfig[MV_ETH_TX_Q_NUM];
+
+    /* Register images - For DP */
+    MV_U32          portTxQueueCmdReg;   /* Port active Tx queues summary    */
+    MV_U32          portRxQueueCmdReg;   /* Port active Rx queues summary    */
+
+    MV_STATE        portState;
+
+    MV_U8           mcastCount[256];
+    MV_U32*         hashPtr;
+    void 	    *osHandle;
+} ETH_PORT_CTRL; 
+
+/************** MACROs ****************/
+
+/* MACROs to Flush / Invalidate TX / RX Buffers */
+#if (ETHER_DRAM_COHER == MV_CACHE_COHER_SW) && !defined(UNCACHED_TX_BUFFERS)
+#   define ETH_PACKET_CACHE_FLUSH(pAddr, size)                                  \
+        mvOsCacheClear(NULL, (pAddr), (size));                                  \
+        /*CPU_PIPE_FLUSH;*/
+#else
+#   define ETH_PACKET_CACHE_FLUSH(pAddr, size)                                  \
+        mvOsIoVirtToPhy(NULL, (pAddr));
+#endif /* ETHER_DRAM_COHER == MV_CACHE_COHER_SW */
+
+#if ( (ETHER_DRAM_COHER == MV_CACHE_COHER_SW) && !defined(UNCACHED_RX_BUFFERS) )
+#   define ETH_PACKET_CACHE_INVALIDATE(pAddr, size)                             \
+        mvOsCacheInvalidate (NULL, (pAddr), (size));                            \
+        /*CPU_PIPE_FLUSH;*/
+#else
+#   define ETH_PACKET_CACHE_INVALIDATE(pAddr, size)    
+#endif /* ETHER_DRAM_COHER == MV_CACHE_COHER_SW && !UNCACHED_RX_BUFFERS */
+
+#ifdef ETH_DESCR_UNCACHED
+
+#define ETH_DESCR_FLUSH_INV(pPortCtrl, pDescr)
+#define ETH_DESCR_INV(pPortCtrl, pDescr)
+
+#else
+
+#define ETH_DESCR_FLUSH_INV(pPortCtrl, pDescr)      \
+        mvOsCacheLineFlushInv(pPortCtrl->osHandle, (MV_ULONG)(pDescr))
+
+#define ETH_DESCR_INV(pPortCtrl, pDescr)            \
+        mvOsCacheLineInv(pPortCtrl->osHandle, (MV_ULONG)(pDescr))
+
+#endif /* ETH_DESCR_UNCACHED */
+
+#include "eth/gbe/mvEthGbe.h"
+
+#endif /* __mvEth_h__ */
+
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvGpp.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvGpp.c
new file mode 100644
index 0000000000..889d4d9e9e
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvGpp.c
@@ -0,0 +1,362 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "gpp/mvGpp.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+/* defines  */       
+#ifdef MV_DEBUG         
+	#define DB(x)	x
+#else                
+	#define DB(x)    
+#endif	             
+
+static MV_VOID gppRegSet(MV_U32 group, MV_U32 regOffs,MV_U32 mask,MV_U32 value);
+
+/*******************************************************************************
+* mvGppTypeSet - Enable a GPP (OUT) pin
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       group - GPP group number
+*       mask  - 32bit mask value. Each set bit in the mask means that the type
+*               of corresponding GPP will be set. Other GPPs are ignored.
+*       value - 32bit value that describes GPP type per pin.
+*
+* OUTPUT:
+*       None.
+*
+* EXAMPLE:
+*       Set GPP8 to input and GPP15 to output.
+*       mvGppTypeSet(0, (GPP8 | GPP15), 
+*                    ((MV_GPP_IN & GPP8) | (MV_GPP_OUT & GPP15)) );
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+MV_STATUS mvGppTypeSet(MV_U32 group, MV_U32 mask, MV_U32 value)
+{
+	if (group >= MV_GPP_MAX_GROUP)
+	{
+		DB(mvOsPrintf("mvGppTypeSet: ERR. invalid group number \n"));
+		return MV_BAD_PARAM;
+	}
+
+	gppRegSet(group, GPP_DATA_OUT_EN_REG(group), mask, value);
+
+    /* Workaround for Erratum FE-MISC-70*/
+    if(mvCtrlRevGet()==MV_88F6XXX_A0_REV && (group == 1))
+    {
+        mask &= 0x2;
+        gppRegSet(0, GPP_DATA_OUT_EN_REG(0), mask, value);
+    } /*End of WA*/
+
+	return MV_OK;
+
+}
+
+/*******************************************************************************
+* mvGppBlinkEn - Set a GPP (IN) Pin list to blink every ~100ms
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       group - GPP group number
+*       mask  - 32bit mask value. Each set bit in the mask means that the type
+*               of corresponding GPP will be set. Other GPPs are ignored.
+*       value - 32bit value that describes GPP blink per pin.
+*
+* OUTPUT:
+*       None.
+*
+* EXAMPLE:
+*       Set GPP8 to be static and GPP15 to be blinking.
+*       mvGppBlinkEn(0, (GPP8 | GPP15), 
+*                    ((MV_GPP_OUT_STATIC & GPP8) | (MV_GPP_OUT_BLINK & GPP15)) );
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+MV_STATUS mvGppBlinkEn(MV_U32 group, MV_U32 mask, MV_U32 value)
+{
+	if (group >= MV_GPP_MAX_GROUP)
+	{
+		DB(mvOsPrintf("mvGppBlinkEn: ERR. invalid group number \n"));
+		return MV_BAD_PARAM;
+	}
+
+	gppRegSet(group, GPP_BLINK_EN_REG(group), mask, value);
+
+	return MV_OK;
+
+}
+/*******************************************************************************
+* mvGppPolaritySet - Set a GPP (IN) Pin list Polarity mode
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       group - GPP group number
+*       mask  - 32bit mask value. Each set bit in the mask means that the type
+*               of corresponding GPP will be set. Other GPPs are ignored.
+*       value - 32bit value that describes GPP polarity per pin.
+*
+* OUTPUT:
+*       None.
+*
+* EXAMPLE:
+*       Set GPP8 to the actual pin value and GPP15 to be inverted.
+*       mvGppPolaritySet(0, (GPP8 | GPP15), 
+*                    ((MV_GPP_IN_ORIGIN & GPP8) | (MV_GPP_IN_INVERT & GPP15)) );
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+MV_STATUS mvGppPolaritySet(MV_U32 group, MV_U32 mask, MV_U32 value)
+{
+	if (group >= MV_GPP_MAX_GROUP)
+	{
+		DB(mvOsPrintf("mvGppPolaritySet: ERR. invalid group number \n"));
+		return MV_BAD_PARAM;
+	}
+
+	gppRegSet(group, GPP_DATA_IN_POL_REG(group), mask, value);
+
+	return MV_OK;
+
+}
+
+/*******************************************************************************
+* mvGppPolarityGet - Get a value of relevant bits from GPP Polarity register.
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       group - GPP group number
+*       mask  - 32bit mask value. Each set bit in the mask means that the 
+*               returned value is valid for it.
+*
+* OUTPUT:
+*       None.
+*
+* EXAMPLE:
+*       Get GPP8 and GPP15 value.
+*       mvGppPolarityGet(0, (GPP8 | GPP15));
+*
+* RETURN:
+*       32bit value that describes GPP polatity mode per pin.
+*
+*******************************************************************************/
+MV_U32  mvGppPolarityGet(MV_U32 group, MV_U32 mask)
+{
+    MV_U32  regVal;
+
+  	if (group >= MV_GPP_MAX_GROUP)
+	{
+		DB(mvOsPrintf("mvGppActiveSet: Error invalid group number \n"));
+		return MV_ERROR;
+	}
+    regVal = MV_REG_READ(GPP_DATA_IN_POL_REG(group));
+    
+    return (regVal & mask);
+}
+
+/*******************************************************************************
+* mvGppValueGet - Get a GPP Pin list value.
+*
+* DESCRIPTION:
+*       This function get GPP value.
+*
+* INPUT:
+*       group - GPP group number
+*       mask  - 32bit mask value. Each set bit in the mask means that the 
+*               returned value is valid for it.
+*
+* OUTPUT:
+*       None.
+*
+* EXAMPLE:
+*       Get GPP8 and GPP15 value.
+*       mvGppValueGet(0, (GPP8 | GPP15));
+*
+* RETURN:
+*       32bit value that describes GPP activity mode per pin.
+*
+*******************************************************************************/
+MV_U32 mvGppValueGet(MV_U32 group, MV_U32 mask)
+{
+	MV_U32 gppData;
+
+	gppData = MV_REG_READ(GPP_DATA_IN_REG(group));
+
+	gppData &= mask;
+
+	return gppData;
+
+}
+
+/*******************************************************************************
+* mvGppValueSet - Set a GPP Pin list value.
+*
+* DESCRIPTION:
+*       This function set value for given GPP pin list.
+*
+* INPUT:
+*       group - GPP group number
+*       mask  - 32bit mask value. Each set bit in the mask means that the 
+*               value of corresponding GPP will be set accordingly. Other GPP 
+*               are not affected.
+*       value - 32bit value that describes GPP value per pin.
+*
+* OUTPUT:
+*       None.
+*
+* EXAMPLE:
+*       Set GPP8 value of '0' and GPP15 value of '1'.
+*       mvGppActiveSet(0, (GPP8 | GPP15), ((0 & GPP8) | (GPP15)) );
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+MV_STATUS mvGppValueSet (MV_U32 group, MV_U32 mask, MV_U32 value)
+{
+	MV_U32 outEnable, tmp;
+	MV_U32 i;
+
+	if (group >= MV_GPP_MAX_GROUP)
+	{
+		DB(mvOsPrintf("mvGppValueSet: Error invalid group number \n"));
+		return MV_BAD_PARAM;
+	}
+
+	/* verify that the gpp pin is configured as output 		*/
+	/* Note that in the register out enabled -> bit = '0'. 	*/
+	outEnable = ~MV_REG_READ(GPP_DATA_OUT_EN_REG(group));
+
+    /* Workaround for Erratum FE-MISC-70*/
+    if(mvCtrlRevGet()==MV_88F6XXX_A0_REV && (group == 1))
+    {
+        tmp = ~MV_REG_READ(GPP_DATA_OUT_EN_REG(0));
+        outEnable &= 0xfffffffd;
+        outEnable |= (tmp & 0x2);
+    } /*End of WA*/
+
+	for (i = 0 ; i < 32 ;i++)
+	{
+		if (((mask & (1 << i)) & (outEnable & (1 << i))) != (mask & (1 << i)))
+		{
+			mvOsPrintf("mvGppValueSet: Err. An attempt to set output "\
+					   "value to GPP %d in input mode.\n", i);
+			return MV_ERROR;
+		}
+	}
+
+	gppRegSet(group, GPP_DATA_OUT_REG(group), mask, value);
+
+	return MV_OK;
+
+}
+/*******************************************************************************
+* gppRegSet - Set a specific GPP pin on a specific GPP register
+*
+* DESCRIPTION:
+*       This function set a specific GPP pin on a specific GPP register
+*
+* INPUT:
+*		regOffs - GPP Register offset 
+*       group - GPP group number
+*       mask  - 32bit mask value. Each set bit in the mask means that the 
+*               value of corresponding GPP will be set accordingly. Other GPP 
+*               are not affected.
+*       value - 32bit value that describes GPP value per pin.
+*
+* OUTPUT:
+*       None.
+*
+* EXAMPLE:
+*       Set GPP8 value of '0' and GPP15 value of '1'.
+*       mvGppActiveSet(0, (GPP8 | GPP15), ((0 & GPP8) | (1 & GPP15)) );
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+static MV_VOID gppRegSet (MV_U32 group, MV_U32 regOffs,MV_U32 mask,MV_U32 value)
+{
+	MV_U32 gppData;
+
+	gppData = MV_REG_READ(regOffs);
+
+	gppData &= ~mask;
+
+	gppData |= (value & mask);
+
+	MV_REG_WRITE(regOffs, gppData);
+}
+
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvGpp.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvGpp.h
new file mode 100644
index 0000000000..526d324fd3
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvGpp.h
@@ -0,0 +1,118 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvGppH
+#define __INCmvGppH
+
+#include "mvCommon.h"
+#include "mvOs.h"
+#include "ctrlEnv/mvCtrlEnvSpec.h"
+#include "gpp/mvGppRegs.h"
+
+/* These macros describes the GPP type. Each of the GPPs pins can        	*/
+/* be assigned to act as a general purpose input or output pin.             */
+#define	MV_GPP_IN	0xFFFFFFFF      			/* GPP input   */
+#define MV_GPP_OUT  0    						/* GPP output  */
+
+
+/* These macros describes the GPP Out Enable. */
+#define	MV_GPP_OUT_DIS	0xFFFFFFFF         	/* Out pin disabled*/
+#define MV_GPP_OUT_EN   0    			 	/* Out pin enabled*/
+
+/* These macros describes the GPP Out Blinking. */
+/* When set and the corresponding bit in GPIO Data Out Enable Control 		*/
+/* Register is enabled, the GPIO pin blinks every ~100 ms (a period of		*/
+/* 2^24 TCLK clocks).														*/
+#define	MV_GPP_OUT_BLINK	0xFFFFFFFF         	/* Out pin blinking*/
+#define MV_GPP_OUT_STATIC   0    			 	/* Out pin static*/
+
+
+/* These macros describes the GPP Polarity. */
+/* When set to 1 GPIO Data In Register reflects the inverted value of the	*/
+/* corresponding pin.														*/
+
+#define	MV_GPP_IN_INVERT	0xFFFFFFFF         	/* Inverted value is got*/
+#define MV_GPP_IN_ORIGIN    0    			 	/* original value is got*/
+
+/* mvGppTypeSet - Set PP pin mode (IN or OUT) */
+MV_STATUS mvGppTypeSet(MV_U32 group, MV_U32 mask, MV_U32 value);
+
+/* mvGppBlinkEn - Set a GPP (IN) Pin list to blink every ~100ms */
+MV_STATUS mvGppBlinkEn(MV_U32 group, MV_U32 mask, MV_U32 value);
+
+/* mvGppPolaritySet - Set a GPP (IN) Pin list Polarity mode. */
+MV_STATUS mvGppPolaritySet(MV_U32 group, MV_U32 mask, MV_U32 value);
+
+/* mvGppPolarityGet - Get the Polarity of a GPP Pin */
+MV_U32  mvGppPolarityGet(MV_U32 group, MV_U32 mask);
+
+/* mvGppValueGet - Get a GPP Pin list value.*/
+MV_U32 mvGppValueGet(MV_U32 group, MV_U32 mask);
+
+
+/* mvGppValueSet - Set a GPP Pin list value. */
+MV_STATUS mvGppValueSet (MV_U32 group, MV_U32 mask, MV_U32 value);
+
+#endif /* #ifndef __INCmvGppH */ 
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvGppRegs.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvGppRegs.h
new file mode 100644
index 0000000000..b6fec34fa8
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvGppRegs.h
@@ -0,0 +1,116 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvGppRegsH
+#define __INCmvGppRegsH
+
+#define    MV_GPP0  BIT0
+#define    MV_GPP1  BIT1
+#define    MV_GPP2  BIT2
+#define    MV_GPP3  BIT3
+#define    MV_GPP4  BIT4
+#define    MV_GPP5  BIT5
+#define    MV_GPP6  BIT6
+#define    MV_GPP7  BIT7
+#define    MV_GPP8  BIT8
+#define    MV_GPP9  BIT9
+#define    MV_GPP10 BIT10
+#define    MV_GPP11 BIT11
+#define    MV_GPP12 BIT12
+#define    MV_GPP13 BIT13
+#define    MV_GPP14 BIT14
+#define    MV_GPP15 BIT15
+#define    MV_GPP16 BIT16
+#define    MV_GPP17 BIT17
+#define    MV_GPP18 BIT18
+#define    MV_GPP19 BIT19
+#define    MV_GPP20 BIT20
+#define    MV_GPP21 BIT21
+#define    MV_GPP22 BIT22
+#define    MV_GPP23 BIT23
+#define    MV_GPP24 BIT24
+#define    MV_GPP25 BIT25
+#define    MV_GPP26 BIT26
+#define    MV_GPP27 BIT27
+#define    MV_GPP28 BIT28
+#define    MV_GPP29 BIT29
+#define    MV_GPP30 BIT30
+#define    MV_GPP31 BIT31
+
+
+/* registers offsets */
+   
+#define GPP_DATA_OUT_REG(grp)			((grp == 0) ? 0x10100 : 0x10140)
+#define GPP_DATA_OUT_EN_REG(grp)		((grp == 0) ? 0x10104 : 0x10144)
+#define GPP_BLINK_EN_REG(grp)			((grp == 0) ? 0x10108 : 0x10148)
+#define GPP_DATA_IN_POL_REG(grp)		((grp == 0) ? 0x1010C : 0x1014c)
+#define GPP_DATA_IN_REG(grp)			((grp == 0) ? 0x10110 : 0x10150)
+#define GPP_INT_CAUSE_REG(grp)			((grp == 0) ? 0x10114 : 0x10154)
+#define GPP_INT_MASK_REG(grp)			((grp == 0) ? 0x10118 : 0x10158)
+#define GPP_INT_LVL_REG(grp)			((grp == 0) ? 0x1011c : 0x1015c)
+
+#define GPP_DATA_OUT_SET_REG			0x10120
+#define GPP_DATA_OUT_CLEAR_REG			0x10124
+
+#endif /* #ifndef __INCmvGppRegsH */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvPciIf.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvPciIf.c
new file mode 100644
index 0000000000..672d3e31f8
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvPciIf.c
@@ -0,0 +1,669 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "mvPciIf.h"
+#include "ctrlEnv/sys/mvSysPex.h"
+
+#if defined(MV_INCLUDE_PCI)
+#include "ctrlEnv/sys/mvSysPci.h"
+#endif
+
+
+/* defines  */       
+#ifdef MV_DEBUG         
+	#define DB(x)	x
+#else                
+	#define DB(x)    
+#endif	             
+					 
+
+/*******************************************************************************
+* mvPciInit - Initialize PCI interfaces
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_OK if function success otherwise MV_ERROR or MV_BAD_PARAM
+*
+*******************************************************************************/
+
+
+MV_STATUS mvPciIfInit(MV_U32 pciIf, PCI_IF_MODE pciIfmode)
+{
+	PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf);
+
+	if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType)
+	{
+		#if defined(MV_INCLUDE_PCI)
+		
+        MV_PCI_MOD pciMod;
+		
+        if (PCI_IF_MODE_HOST == pciIfmode)
+        {
+            pciMod = MV_PCI_MOD_HOST;
+        }
+        else if (PCI_IF_MODE_DEVICE == pciIfmode)
+        {
+            pciMod = MV_PCI_MOD_DEVICE;
+        }
+        else
+        {
+            mvOsPrintf("%s: ERROR!!! Bus %d mode %d neither host nor device!\n", 
+                        __FUNCTION__, pciIf, pciIfmode);
+            return MV_FAIL;
+        }
+        
+        return mvPciInit(pciIf - MV_PCI_START_IF, pciMod);
+		#else
+		return MV_OK;
+		#endif
+	}
+	else if (PCI_IF_TYPE_PEX == pciIfType)
+	{
+		#if defined(MV_INCLUDE_PEX)
+		
+        MV_PEX_TYPE pexType;
+		
+        if (PCI_IF_MODE_HOST == pciIfmode)
+        {
+            pexType = MV_PEX_ROOT_COMPLEX;
+        }
+        else if (PCI_IF_MODE_DEVICE == pciIfmode)
+        {
+            pexType = MV_PEX_END_POINT;
+        }
+        else
+        {
+            mvOsPrintf("%s: ERROR!!! Bus %d type %d neither root complex nor" \
+                       " end point\n", __FUNCTION__, pciIf, pciIfmode);
+            return MV_FAIL;
+        }
+		return mvPexInit(pciIf - MV_PEX_START_IF, pexType);
+
+		#else
+		return MV_OK;
+		#endif
+
+	}
+	else
+	{
+		mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf);
+	}
+
+	return MV_FAIL;
+
+}
+
+/* PCI configuration space read write */
+
+/*******************************************************************************
+* mvPciConfigRead - Read from configuration space
+*
+* DESCRIPTION:
+*       This function performs a 32 bit read from PCI configuration space.
+*       It supports both type 0 and type 1 of Configuration Transactions 
+*       (local and over bridge). In order to read from local bus segment, use 
+*       bus number retrieved from mvPciLocalBusNumGet(). Other bus numbers 
+*       will result configuration transaction of type 1 (over bridge).
+*
+* INPUT:
+*       pciIf   - PCI interface number.
+*       bus     - PCI segment bus number.
+*       dev     - PCI device number.
+*       func    - Function number.
+*       regOffs - Register offset.       
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       32bit register data, 0xffffffff on error
+*
+*******************************************************************************/
+MV_U32 mvPciIfConfigRead (MV_U32 pciIf, MV_U32 bus, MV_U32 dev, MV_U32 func, 
+                        MV_U32 regOff)
+{
+	PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf);
+
+	if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType)
+	{
+		#if defined(MV_INCLUDE_PCI)
+		return mvPciConfigRead(pciIf - MV_PCI_START_IF,
+								bus,
+								dev, 
+                                func,
+								regOff);
+		#else
+		return 0xffffffff;
+		#endif
+	}
+	else if (PCI_IF_TYPE_PEX == pciIfType)
+	{
+		#if defined(MV_INCLUDE_PEX)
+		return mvPexConfigRead(pciIf - MV_PEX_START_IF,
+								bus,
+								dev, 
+                                func,
+								regOff);
+		#else
+		return 0xffffffff;
+		#endif
+
+	}
+	else
+	{
+		mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf);
+	}
+
+	return 0;
+
+}
+
+/*******************************************************************************
+* mvPciConfigWrite - Write to configuration space
+*
+* DESCRIPTION:
+*       This function performs a 32 bit write to PCI configuration space.
+*       It supports both type 0 and type 1 of Configuration Transactions 
+*       (local and over bridge). In order to write to local bus segment, use 
+*       bus number retrieved from mvPciLocalBusNumGet(). Other bus numbers 
+*       will result configuration transaction of type 1 (over bridge).
+*
+* INPUT:
+*       pciIf   - PCI interface number.
+*       bus     - PCI segment bus number.
+*       dev     - PCI device number.
+*       func    - Function number.
+*       regOffs - Register offset.       
+*       data    - 32bit data.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciIfConfigWrite(MV_U32 pciIf, MV_U32 bus, MV_U32 dev, 
+                           MV_U32 func, MV_U32 regOff, MV_U32 data)
+{
+	PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf);
+
+	if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType)
+	{
+		#if defined(MV_INCLUDE_PCI)
+		return mvPciConfigWrite(pciIf - MV_PCI_START_IF,
+								bus,
+								dev, 
+                                func,
+								regOff,
+								data);
+		#else
+		return MV_OK;
+		#endif
+	}
+	else if (PCI_IF_TYPE_PEX == pciIfType)
+	{
+		#if defined(MV_INCLUDE_PEX)
+		return mvPexConfigWrite(pciIf - MV_PEX_START_IF,
+								bus,
+								dev, 
+                                func,
+								regOff,
+								data);
+		#else
+		return MV_OK;
+		#endif
+
+	}
+	else
+	{
+		mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf);
+	}
+
+	return MV_FAIL;
+
+}
+
+/*******************************************************************************
+* mvPciMasterEnable - Enable/disale PCI interface master transactions.
+*
+* DESCRIPTION:
+*       This function performs read modified write to PCI command status 
+*       (offset 0x4) to set/reset bit 2. After this bit is set, the PCI 
+*       master is allowed to gain ownership on the bus, otherwise it is 
+*       incapable to do so.
+*
+* INPUT:
+*       pciIf  - PCI interface number.
+*       enable - Enable/disable parameter.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciIfMasterEnable(MV_U32 pciIf, MV_BOOL enable)
+{
+
+	PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf);
+
+	if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType)
+	{
+		#if defined(MV_INCLUDE_PCI)
+		return mvPciMasterEnable(pciIf - MV_PCI_START_IF,
+								enable);
+		#else
+		return MV_OK;
+		#endif
+	}
+	else if (PCI_IF_TYPE_PEX == pciIfType)
+	{
+		#if defined(MV_INCLUDE_PEX)
+		return mvPexMasterEnable(pciIf - MV_PEX_START_IF,
+								enable);
+		#else
+		return MV_OK;
+		#endif
+	}
+	else
+	{
+		mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf);
+	}
+
+	return MV_FAIL;
+
+}
+
+
+/*******************************************************************************
+* mvPciSlaveEnable - Enable/disale PCI interface slave transactions.
+*
+* DESCRIPTION:
+*       This function performs read modified write to PCI command status 
+*       (offset 0x4) to set/reset bit 0 and 1. After those bits are set, 
+*       the PCI slave is allowed to respond to PCI IO space access (bit 0) 
+*       and PCI memory space access (bit 1). 
+*
+* INPUT:
+*       pciIf  - PCI interface number.
+*       dev     - PCI device number.
+*       enable - Enable/disable parameter.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciIfSlaveEnable(MV_U32 pciIf,MV_U32 bus, MV_U32 dev, MV_BOOL enable)
+{
+
+	PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf);
+
+	if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType)
+	{
+		#if defined(MV_INCLUDE_PCI)
+		return mvPciSlaveEnable(pciIf - MV_PCI_START_IF,bus,dev,
+								enable);
+		#else
+		return MV_OK;
+		#endif
+	}
+	else if (PCI_IF_TYPE_PEX == pciIfType)
+	{
+		#if defined(MV_INCLUDE_PEX)
+		return mvPexSlaveEnable(pciIf - MV_PEX_START_IF,bus,dev,
+								enable);
+		#else
+		return MV_OK;
+		#endif
+	}
+	else
+	{
+		mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf);
+	}
+
+	return MV_FAIL;
+
+}
+
+/*******************************************************************************
+* mvPciLocalBusNumSet - Set PCI interface local bus number.
+*
+* DESCRIPTION:
+*       This function sets given PCI interface its local bus number.
+*       Note: In case the PCI interface is PCI-X, the information is read-only.
+*
+* INPUT:
+*       pciIf  - PCI interface number.
+*       busNum - Bus number.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_NOT_ALLOWED in case PCI interface is PCI-X. 
+*		MV_BAD_PARAM on bad parameters ,
+*       otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciIfLocalBusNumSet(MV_U32 pciIf, MV_U32 busNum)
+{
+	PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf);
+
+	if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType)
+	{
+		#if defined(MV_INCLUDE_PCI)
+		return mvPciLocalBusNumSet(pciIf - MV_PCI_START_IF,
+								busNum);	
+		#else
+		return MV_OK;
+		#endif
+    }
+    else if (PCI_IF_TYPE_PEX == pciIfType)
+	{
+		#if defined(MV_INCLUDE_PEX)
+		return mvPexLocalBusNumSet(pciIf - MV_PEX_START_IF,
+								busNum);
+		#else
+		return MV_OK;
+		#endif
+	}
+	else
+	{
+		mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf);
+	}
+
+	return MV_FAIL;
+
+}
+
+/*******************************************************************************
+* mvPciLocalBusNumGet - Get PCI interface local bus number.
+*
+* DESCRIPTION:
+*       This function gets the local bus number of a given PCI interface.
+*
+* INPUT:
+*       pciIf  - PCI interface number.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       Local bus number.0xffffffff on Error
+*
+*******************************************************************************/
+MV_U32 mvPciIfLocalBusNumGet(MV_U32 pciIf)
+{
+	PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf);
+
+	if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType)
+	{
+		#if defined(MV_INCLUDE_PCI)
+		return mvPciLocalBusNumGet(pciIf - MV_PCI_START_IF);
+		#else
+		return 0xFFFFFFFF;
+		#endif
+	}
+	else if (PCI_IF_TYPE_PEX == pciIfType)
+	{
+		#if defined(MV_INCLUDE_PEX)
+		return mvPexLocalBusNumGet(pciIf - MV_PEX_START_IF);
+		#else
+		return 0xFFFFFFFF;
+		#endif
+
+	}
+	else
+	{
+		mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n",__FUNCTION__, pciIf);
+	}
+
+	return 0;
+
+}
+
+
+/*******************************************************************************
+* mvPciLocalDevNumSet - Set PCI interface local device number.
+*
+* DESCRIPTION:
+*       This function sets given PCI interface its local device number.
+*       Note: In case the PCI interface is PCI-X, the information is read-only.
+*
+* INPUT:
+*       pciIf  - PCI interface number.
+*       devNum - Device number.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_NOT_ALLOWED in case PCI interface is PCI-X. MV_BAD_PARAM on bad parameters ,
+*       otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciIfLocalDevNumSet(MV_U32 pciIf, MV_U32 devNum)
+{
+	PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf);
+
+	if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType)
+	{
+		#if defined(MV_INCLUDE_PCI)
+		return mvPciLocalDevNumSet(pciIf - MV_PCI_START_IF,
+								devNum);	
+		#else
+		return MV_OK;
+		#endif
+	}
+	else if (PCI_IF_TYPE_PEX == pciIfType)
+	{
+		#if defined(MV_INCLUDE_PEX)
+		return mvPexLocalDevNumSet(pciIf - MV_PEX_START_IF,
+								devNum);
+		#else
+		return MV_OK;
+		#endif
+	}
+	else
+	{
+		mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf);
+	}
+
+	return MV_FAIL;
+
+}
+
+/*******************************************************************************
+* mvPciLocalDevNumGet - Get PCI interface local device number.
+*
+* DESCRIPTION:
+*       This function gets the local device number of a given PCI interface.
+*
+* INPUT:
+*       pciIf  - PCI interface number.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       Local device number. 0xffffffff on Error
+*
+*******************************************************************************/
+MV_U32 mvPciIfLocalDevNumGet(MV_U32 pciIf)
+{
+	PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf);
+
+	if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType)
+	{
+		#if defined(MV_INCLUDE_PCI)
+		return mvPciLocalDevNumGet(pciIf - MV_PCI_START_IF);
+		#else
+		return 0xFFFFFFFF;
+		#endif
+	}
+	else if (PCI_IF_TYPE_PEX == pciIfType)
+	{
+		#if defined(MV_INCLUDE_PEX)
+		return mvPexLocalDevNumGet(pciIf - MV_PEX_START_IF);
+		#else
+		return 0xFFFFFFFF;
+		#endif
+
+	}
+	else
+	{
+		mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf);
+	}
+
+	return 0;
+
+}
+
+/*******************************************************************************
+* mvPciIfTypeGet - 
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*
+*******************************************************************************/
+
+PCI_IF_TYPE mvPciIfTypeGet(MV_U32 pciIf)
+{
+
+	if ((pciIf >= MV_PCI_START_IF)&&(pciIf < MV_PCI_MAX_IF + MV_PCI_START_IF))
+	{
+		return PCI_IF_TYPE_CONVEN_PCIX;
+	}
+	else if ((pciIf >= MV_PEX_START_IF) &&
+			 (pciIf < MV_PEX_MAX_IF + MV_PEX_START_IF))
+	{
+		return PCI_IF_TYPE_PEX;
+
+	}
+	else
+	{
+		mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf);
+	}
+
+	return 0xffffffff;
+
+}
+
+/*******************************************************************************
+* mvPciIfTypeGet - 
+*
+* DESCRIPTION:
+*
+* INPUT:
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*
+*******************************************************************************/
+
+MV_U32  mvPciRealIfNumGet(MV_U32 pciIf)
+{
+
+	PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf);
+
+	if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType)
+	{
+		return (pciIf - MV_PCI_START_IF);
+	}
+	else if (PCI_IF_TYPE_PEX == pciIfType)
+	{
+		return (pciIf - MV_PEX_START_IF);
+
+	}
+	else
+	{
+		mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf);
+	}
+
+	return 0xffffffff;
+
+}
+
+
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvPciIf.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvPciIf.h
new file mode 100644
index 0000000000..9c2d1604e7
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvPciIf.h
@@ -0,0 +1,134 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCPCIIFH
+#define __INCPCIIFH
+
+#include "mvSysHwConfig.h"
+#include "pci-if/mvPciIfRegs.h"
+#if defined(MV_INCLUDE_PEX)
+#include "pex/mvPex.h"
+#endif
+#if defined(MV_INCLUDE_PCI)
+#include "pci/mvPci.h"
+#endif
+#include "ctrlEnv/mvCtrlEnvLib.h"
+#include "ctrlEnv/mvCtrlEnvAddrDec.h"
+
+typedef enum _mvPCIIfType
+{
+	PCI_IF_TYPE_CONVEN_PCIX,
+	PCI_IF_TYPE_PEX
+
+}PCI_IF_TYPE;
+
+typedef enum _mvPCIIfMode
+{
+	PCI_IF_MODE_HOST,
+	PCI_IF_MODE_DEVICE
+}PCI_IF_MODE;
+
+
+/* Global Functions prototypes */
+
+/* mvPciIfInit - Initialize PCI interfaces*/
+MV_STATUS mvPciIfInit(MV_U32 pciIf, PCI_IF_MODE pciIfmode);
+
+/* mvPciIfConfigRead - Read from configuration space */
+MV_U32 mvPciIfConfigRead (MV_U32 pciIf, MV_U32 bus, MV_U32 dev,
+						MV_U32 func,MV_U32 regOff);
+
+/* mvPciIfConfigWrite - Write to configuration space */
+MV_STATUS mvPciIfConfigWrite(MV_U32 pciIf, MV_U32 bus, MV_U32 dev,
+                           MV_U32 func, MV_U32 regOff, MV_U32 data);
+
+/* mvPciIfMasterEnable - Enable/disale PCI interface master transactions.*/
+MV_STATUS mvPciIfMasterEnable(MV_U32 pciIf, MV_BOOL enable);
+
+/* mvPciIfSlaveEnable - Enable/disale PCI interface slave transactions.*/
+MV_STATUS mvPciIfSlaveEnable(MV_U32 pciIf,MV_U32 bus, MV_U32 dev, 
+							 MV_BOOL enable);
+
+/* mvPciIfLocalBusNumSet - Set PCI interface local bus number.*/
+MV_STATUS mvPciIfLocalBusNumSet(MV_U32 pciIf, MV_U32 busNum);
+
+/* mvPciIfLocalBusNumGet - Get PCI interface local bus number.*/
+MV_U32 mvPciIfLocalBusNumGet(MV_U32 pciIf);
+
+/* mvPciIfLocalDevNumSet - Set PCI interface local device number.*/
+MV_STATUS mvPciIfLocalDevNumSet(MV_U32 pciIf, MV_U32 devNum);
+
+/* mvPciIfLocalDevNumGet - Get PCI interface local device number.*/
+MV_U32 mvPciIfLocalDevNumGet(MV_U32 pciIf);
+
+/* mvPciIfTypeGet - Get PCI If type*/
+PCI_IF_TYPE mvPciIfTypeGet(MV_U32 pciIf);
+
+MV_U32  mvPciRealIfNumGet(MV_U32 pciIf);
+
+/* mvPciIfAddrDecShow - Display address decode windows attributes */
+MV_VOID mvPciIfAddrDecShow(MV_VOID);
+
+#endif /* #ifndef __INCPCIIFH */
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvPciIfRegs.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvPciIfRegs.h
new file mode 100644
index 0000000000..08d4d2d901
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvPciIfRegs.h
@@ -0,0 +1,245 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCPCIIFREGSH
+#define __INCPCIIFREGSH
+
+
+/* defines */
+#define MAX_PCI_DEVICES         32
+#define MAX_PCI_FUNCS           8
+#define MAX_PCI_BUSSES          128
+
+/***************************************/
+/* PCI Configuration registers */
+/***************************************/
+
+/*********************************************/
+/* PCI Configuration, Function 0, Registers  */
+/*********************************************/
+
+
+/* Standard registers */
+#define PCI_DEVICE_AND_VENDOR_ID					0x000
+#define PCI_STATUS_AND_COMMAND						0x004
+#define PCI_CLASS_CODE_AND_REVISION_ID			    0x008
+#define PCI_BIST_HDR_TYPE_LAT_TMR_CACHE_LINE		0x00C
+#define PCI_MEMORY_BAR_BASE_ADDR(barNum)		 	(0x010 + ((barNum) << 2))
+#define PCI_SUBSYS_ID_AND_SUBSYS_VENDOR_ID		 	0x02C
+#define PCI_EXPANSION_ROM_BASE_ADDR_REG			    0x030
+#define PCI_CAPABILTY_LIST_POINTER			        0x034
+#define PCI_INTERRUPT_PIN_AND_LINE					0x03C
+
+
+/* PCI Device and Vendor ID Register (PDVIR) */
+#define PDVIR_VEN_ID_OFFS			0 	/* Vendor ID */
+#define PDVIR_VEN_ID_MASK			(0xffff << PDVIR_VEN_ID_OFFS)
+
+#define PDVIR_DEV_ID_OFFS			16	/* Device ID */
+#define PDVIR_DEV_ID_MASK  			(0xffff << PDVIR_DEV_ID_OFFS)
+
+/* PCI Status and Command Register (PSCR) */
+#define PSCR_IO_EN			BIT0 	/* IO Enable 							  */
+#define PSCR_MEM_EN			BIT1	/* Memory Enable 						  */
+#define PSCR_MASTER_EN		BIT2	/* Master Enable 						  */
+#define PSCR_SPECIAL_EN		BIT3	/* Special Cycle Enable 				  */
+#define PSCR_MEM_WRI_INV	BIT4	/* Memory Write and Invalidate Enable	  */
+#define PSCR_VGA			BIT5	/* VGA Palette Snoops 					  */
+#define PSCR_PERR_EN		BIT6	/* Parity Errors Respond Enable 		  */
+#define PSCR_ADDR_STEP   	BIT7    /* Address Stepping Enable (Wait Cycle En)*/
+#define PSCR_SERR_EN		BIT8	/* Ability to assert SERR# line			  */
+#define PSCR_FAST_BTB_EN	BIT9	/* generate fast back-to-back transactions*/
+#define PSCR_CAP_LIST		BIT20	/* Capability List Support 				  */
+#define PSCR_66MHZ_EN		BIT21   /* 66 MHz Capable 						  */
+#define PSCR_UDF_EN			BIT22   /* User definable features 				  */
+#define PSCR_TAR_FAST_BB 	BIT23   /* fast back-to-back transactions capable */
+#define PSCR_DATA_PERR		BIT24   /* Data Parity reported 				  */
+
+#define PSCR_DEVSEL_TIM_OFFS 	25  /* DEVSEL timing */
+#define PSCR_DEVSEL_TIM_MASK 	(0x3 << PSCR_DEVSEL_TIM_OFFS)
+#define PSCR_DEVSEL_TIM_FAST	(0x0 << PSCR_DEVSEL_TIM_OFFS)
+#define PSCR_DEVSEL_TIM_MED 	(0x1 << PSCR_DEVSEL_TIM_OFFS)
+#define PSCR_DEVSEL_TIM_SLOW 	(0x2 << PSCR_DEVSEL_TIM_OFFS)
+
+#define PSCR_SLAVE_TABORT	BIT27	/* Signalled Target Abort 	*/
+#define PSCR_MASTER_TABORT	BIT28	/* Recieved Target Abort 	*/
+#define PSCR_MABORT			BIT29	/* Recieved Master Abort 	*/
+#define PSCR_SYSERR			BIT30	/* Signalled system error 	*/
+#define PSCR_DET_PARERR		BIT31	/* Detect Parity Error 		*/
+
+/* 	PCI configuration register offset=0x08 fields 
+	(PCI_CLASS_CODE_AND_REVISION_ID)(PCCRI) 				*/
+
+#define PCCRIR_REVID_OFFS		0		/* Revision ID */
+#define PCCRIR_REVID_MASK		(0xff << PCCRIR_REVID_OFFS)
+
+#define PCCRIR_FULL_CLASS_OFFS	8		/* Full Class Code */
+#define PCCRIR_FULL_CLASS_MASK	(0xffffff << PCCRIR_FULL_CLASS_OFFS)
+
+#define PCCRIR_PROGIF_OFFS		8		/* Prog .I/F*/
+#define PCCRIR_PROGIF_MASK		(0xff << PCCRIR_PROGIF_OFFS)
+
+#define PCCRIR_SUB_CLASS_OFFS	16		/* Sub Class*/
+#define PCCRIR_SUB_CLASS_MASK	(0xff << PCCRIR_SUB_CLASS_OFFS)
+
+#define PCCRIR_BASE_CLASS_OFFS	24		/* Base Class*/
+#define PCCRIR_BASE_CLASS_MASK	(0xff << PCCRIR_BASE_CLASS_OFFS)
+
+/* 	PCI configuration register offset=0x0C fields 
+	(PCI_BIST_HEADER_TYPE_LATENCY_TIMER_CACHE_LINE)(PBHTLTCL) 				*/
+
+#define PBHTLTCLR_CACHELINE_OFFS		0	/* Specifies the cache line size */
+#define PBHTLTCLR_CACHELINE_MASK		(0xff << PBHTLTCLR_CACHELINE_OFFS)
+	
+#define PBHTLTCLR_LATTIMER_OFFS			8	/* latency timer */
+#define PBHTLTCLR_LATTIMER_MASK			(0xff << PBHTLTCLR_LATTIMER_OFFS)
+
+#define PBHTLTCLR_HEADTYPE_FULL_OFFS	16	/* Full Header Type */
+#define PBHTLTCLR_HEADTYPE_FULL_MASK	(0xff << PBHTLTCLR_HEADTYPE_FULL_OFFS)
+
+#define PBHTLTCLR_MULTI_FUNC			BIT23	/* Multi/Single function */
+
+#define PBHTLTCLR_HEADER_OFFS			16		/* Header type */
+#define PBHTLTCLR_HEADER_MASK			(0x7f << PBHTLTCLR_HEADER_OFFS)
+#define PBHTLTCLR_HEADER_STANDARD		(0x0 << PBHTLTCLR_HEADER_OFFS)
+#define PBHTLTCLR_HEADER_PCI2PCI_BRIDGE	(0x1 << PBHTLTCLR_HEADER_OFFS)
+
+
+#define PBHTLTCLR_BISTCOMP_OFFS		24	/* BIST Completion Code */
+#define PBHTLTCLR_BISTCOMP_MASK		(0xf << PBHTLTCLR_BISTCOMP_OFFS)
+
+#define PBHTLTCLR_BISTACT			BIT30	/* BIST Activate bit */
+#define PBHTLTCLR_BISTCAP			BIT31	/* BIST Capable Bit */
+
+
+/* PCI Bar Base Low Register (PBBLR) */
+#define PBBLR_IOSPACE			BIT0	/* Memory Space Indicator */
+
+#define PBBLR_TYPE_OFFS			1	   /* BAR Type/Init Val. */ 
+#define PBBLR_TYPE_MASK			(0x3 << PBBLR_TYPE_OFFS)
+#define PBBLR_TYPE_32BIT_ADDR	(0x0 << PBBLR_TYPE_OFFS)
+#define PBBLR_TYPE_64BIT_ADDR	(0x2 << PBBLR_TYPE_OFFS)
+
+#define PBBLR_PREFETCH_EN		BIT3 	/* Prefetch Enable */
+
+				
+#define PBBLR_MEM_BASE_OFFS		4	/* Memory Bar Base address. Corresponds to
+									address bits [31:4] */
+#define PBBLR_MEM_BASE_MASK		(0xfffffff << PBBLR_MEM_BASE_OFFS)
+
+#define PBBLR_IO_BASE_OFFS		2	/* IO Bar Base address. Corresponds to 
+										address bits [31:2] */
+#define PBBLR_IO_BASE_MASK		(0x3fffffff << PBBLR_IO_BASE_OFFS)
+
+
+#define PBBLR_BASE_OFFS			12		/* Base address. Address bits [31:12] */
+#define PBBLR_BASE_MASK			(0xfffff << PBBLR_BASE_OFFS)
+#define PBBLR_BASE_ALIGNMET		(1 << PBBLR_BASE_OFFS)
+
+
+/* PCI Bar Base High Fegister (PBBHR) */
+#define PBBHR_BASE_OFFS			0		/* Base address. Address bits [31:12] */
+#define PBBHR_BASE_MASK			(0xffffffff << PBBHR_BASE_OFFS)
+
+
+/* 	PCI configuration register offset=0x2C fields 
+	(PCI_SUBSYSTEM_ID_AND_SUBSYSTEM_VENDOR_ID)(PSISVI) 				*/
+
+#define PSISVIR_VENID_OFFS	0	/* Subsystem Manufacturer Vendor ID Number */
+#define PSISVIR_VENID_MASK	(0xffff << PSISVIR_VENID_OFFS)
+
+#define PSISVIR_DEVID_OFFS	16	/* Subsystem Device ID Number */
+#define PSISVIR_DEVID_MASK	(0xffff << PSISVIR_DEVID_OFFS)
+
+/* 	PCI configuration register offset=0x30 fields 
+	(PCI_EXPANSION_ROM_BASE_ADDR_REG)(PERBA) 				*/
+
+#define PERBAR_EXPROMEN		BIT0	/* Expansion ROM Enable */
+
+#define PERBAR_BASE_OFFS		12		/* Expansion ROM Base Address */
+#define PERBAR_BASE_MASK		(0xfffff << PERBAR_BASE_OFFS) 	
+
+/* 	PCI configuration register offset=0x34 fields 
+	(PCI_CAPABILTY_LIST_POINTER)(PCLP) 				*/
+
+#define PCLPR_CAPPTR_OFFS	0		/* Capability List Pointer */
+#define PCLPR_CAPPTR_MASK	(0xff << PCLPR_CAPPTR_OFFS)
+
+/* 	PCI configuration register offset=0x3C fields 
+	(PCI_INTERRUPT_PIN_AND_LINE)(PIPL) 				*/
+
+#define PIPLR_INTLINE_OFFS	0	/* Interrupt line (IRQ) */
+#define PIPLR_INTLINE_MASK	(0xff << PIPLR_INTLINE_OFFS)
+
+#define PIPLR_INTPIN_OFFS	8	/* interrupt pin (A,B,C,D) */
+#define PIPLR_INTPIN_MASK	(0xff << PIPLR_INTPIN_OFFS)
+
+#define PIPLR_MINGRANT_OFFS	16	/* Minimum Grant on 250 nano seconds units */
+#define PIPLR_MINGRANT_MASK	(0xff << PIPLR_MINGRANT_OFFS)
+
+#define PIPLR_MAXLATEN_OFFS	24	/* Maximum latency on 250 nano seconds units */
+#define PIPLR_MAXLATEN_MASK	(0xff << PIPLR_MAXLATEN_OFFS)
+
+#endif /* #ifndef __INCPCIIFREGSH */
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/pci_util/mvPciUtils.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/pci_util/mvPciUtils.c
new file mode 100644
index 0000000000..f2169793b8
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/pci_util/mvPciUtils.c
@@ -0,0 +1,1006 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED.  The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer.
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    *   Neither the name of Marvell nor the names of its contributors may be
+        used to endorse or promote products derived from this software without
+        specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+/* includes */
+#include "mvPciUtils.h"
+
+#include "ctrlEnv/mvCtrlEnvLib.h"
+
+/* #define MV_DEBUG */
+/* defines  */
+#ifdef MV_DEBUG
+	#define DB(x)	x
+	#define mvOsPrintf printf
+#else
+	#define DB(x)
+#endif
+
+/*
+This module only support scanning of Header type 00h of pci devices
+There is no suppotr for Header type 01h of pci devices  ( PCI bridges )
+*/
+
+
+static MV_STATUS pciDetectDevice(MV_U32 pciIf,
+   								 MV_U32 bus,
+   								 MV_U32 dev,
+   								 MV_U32 func,
+								 MV_PCI_DEVICE *pPciAgent);
+
+static MV_U32 pciDetectDeviceBars(MV_U32 pciIf,
+									MV_U32 bus,
+									MV_U32 dev,
+									MV_U32 func,
+									MV_PCI_DEVICE *pPciAgent);
+
+
+
+
+
+
+/*******************************************************************************
+* mvPciScan - Scan a PCI interface bus
+*
+* DESCRIPTION:
+* Performs a full scan on a PCI interface and returns all possible details
+* on the agents found on the bus.
+*
+* INPUT:
+*       pciIf       - PCI Interface
+*       pPciAgents 	- Pointer to an Array of the pci agents to be detected
+*		pPciAgentsNum - pPciAgents array maximum number of elements
+*
+* OUTPUT:
+*       pPciAgents - Array of the pci agents detected on the bus
+*		pPciAgentsNum - Number of pci agents detected on the bus
+*
+* RETURN:
+*       MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+
+MV_STATUS mvPciScan(MV_U32 pciIf,
+					MV_PCI_DEVICE *pPciAgents,
+					MV_U32 *pPciAgentsNum)
+{
+
+	MV_U32 devIndex,funcIndex=0,busIndex=0,detectedDevNum=0;
+    MV_U32 localBus=mvPciIfLocalBusNumGet(pciIf);
+    MV_PCI_DEVICE *pPciDevice;
+	MV_PCI_DEVICE *pMainDevice;
+
+	DB(mvOsPrintf("mvPciScan: PCI interface num %d\n", pciIf));
+	/* Parameter checking   */
+	if (pciIf >= mvCtrlPexMaxIfGet())
+	{
+		DB(mvOsPrintf("mvPciScan: ERR. Invalid PCI interface num %d\n", pciIf));
+		return MV_BAD_PARAM;
+	}
+	if (NULL == pPciAgents)
+	{
+		DB(mvOsPrintf("mvPciScan: ERR. pPciAgents=NULL \n"));
+		return MV_BAD_PARAM;
+	}
+	if (NULL == pPciAgentsNum)
+	{
+		DB(mvOsPrintf("mvPciScan: ERR. pPciAgentsNum=NULL \n"));
+		return MV_BAD_PARAM;
+	}
+
+
+	DB(mvOsPrintf("mvPciScan: PCI interface num %d mvPciMasterEnable\n", pciIf));
+	/* Master enable the MV PCI master */
+	if (MV_OK != mvPciIfMasterEnable(pciIf,MV_TRUE))
+	{
+		DB(mvOsPrintf("mvPciScan: ERR. mvPciMasterEnable failed  \n"));
+		return MV_ERROR;
+
+	}
+
+	DB(mvOsPrintf("mvPciScan: PCI interface num scan%d\n", pciIf));
+
+	/* go through all busses */
+	for (busIndex=localBus ; busIndex < MAX_PCI_BUSSES ; busIndex++)
+	{
+		/* go through all possible devices on the local bus */
+		for (devIndex=0 ; devIndex < MAX_PCI_DEVICES ; devIndex++)
+		{
+			/* always start with function equal to zero */
+			funcIndex=0;
+
+			pPciDevice=&pPciAgents[detectedDevNum];
+			DB(mvOsPrintf("mvPciScan: PCI interface num scan%d:%d\n", busIndex, devIndex));
+
+			if (MV_ERROR == pciDetectDevice(pciIf,
+										   busIndex,
+										   devIndex,
+										   funcIndex,
+										   pPciDevice))
+			{
+				/* no device detected , try the next address */
+				continue;
+			}
+
+			/* We are here ! means we have detected a device*/
+			/* always we start with only one function per device */
+			pMainDevice = pPciDevice;
+			pPciDevice->funtionsNum = 1;
+
+
+			/* move on */
+			detectedDevNum++;
+
+
+			/* check if we have no more room for a new device */
+			if (detectedDevNum == *pPciAgentsNum)
+			{
+				DB(mvOsPrintf("mvPciScan: ERR. array passed too small \n"));
+				return MV_ERROR;
+			}
+
+			/* check the detected device if it is a multi functional device then
+			scan all device functions*/
+			if (pPciDevice->isMultiFunction == MV_TRUE)
+			{
+				/* start with function number 1 because we have already detected
+				function 0 */
+				for (funcIndex=1; funcIndex<MAX_PCI_FUNCS ; funcIndex++)
+				{
+					pPciDevice=&pPciAgents[detectedDevNum];
+
+					if (MV_ERROR == pciDetectDevice(pciIf,
+												   busIndex,
+												   devIndex,
+												   funcIndex,
+												   pPciDevice))
+					{
+						/* no device detected means no more functions !*/
+						continue;
+					}
+					/* We are here ! means we have detected a device */
+
+					/* move on */
+					pMainDevice->funtionsNum++;
+					detectedDevNum++;
+
+					/* check if we have no more room for a new device */
+					if (detectedDevNum == *pPciAgentsNum)
+					{
+						DB(mvOsPrintf("mvPciScan: ERR. Array too small\n"));
+						return MV_ERROR;
+					}
+
+
+				}
+			}
+
+		}
+
+	}
+
+	/* return the number of devices actually detected on the bus ! */
+	*pPciAgentsNum = detectedDevNum;
+
+	return MV_OK;
+
+}
+
+
+/*******************************************************************************
+* pciDetectDevice - Detect a pci device parameters
+*
+* DESCRIPTION:
+*	This function detect if a pci agent exist on certain address !
+*   and if exists then it fills all possible information on the
+*   agent
+*
+* INPUT:
+*       pciIf       - PCI Interface
+*		bus		-	Bus number
+*		dev		- 	Device number
+*		func	-	Function number
+*
+*
+*
+* OUTPUT:
+*       pPciAgent - pointer to the pci agent filled with its information
+*
+* RETURN:
+*       MV_ERROR if no device , MV_OK otherwise
+*
+*******************************************************************************/
+
+static MV_STATUS pciDetectDevice(MV_U32 pciIf,
+   								 MV_U32 bus,
+   								 MV_U32 dev,
+   								 MV_U32 func,
+								 MV_PCI_DEVICE *pPciAgent)
+{
+	MV_U32 pciData;
+
+	/* no Parameters checking ! because it is static function and it is assumed
+	that all parameters were checked in the calling function */
+
+
+	/* Try read the PCI Vendor ID and Device ID */
+
+	/*  We will scan only ourselves and the PCI slots that exist on the
+		board, because we may have a case that we have one slot that has
+		a Cardbus connector, and because CardBus answers all IDsels we want
+		to scan only this slot and ourseleves.
+
+	*/
+	#if defined(MV_INCLUDE_PCI)
+	if ((PCI_IF_TYPE_CONVEN_PCIX == mvPciIfTypeGet(pciIf)) &&
+					(DB_88F5181_DDR1_PRPMC != mvBoardIdGet()) &&
+					(DB_88F5181_DDR1_PEXPCI != mvBoardIdGet()) &&
+					(DB_88F5181_DDR1_MNG != mvBoardIdGet()))
+    	{
+
+			if (mvBoardIsOurPciSlot(bus, dev) == MV_FALSE)
+			{
+				return MV_ERROR;
+			}
+	}
+	#endif /* defined(MV_INCLUDE_PCI) */
+
+	pciData = mvPciIfConfigRead(pciIf, bus,dev,func, PCI_DEVICE_AND_VENDOR_ID);
+
+	if (PCI_ERROR_CODE == pciData)
+	{
+		/* no device exist */
+		return MV_ERROR;
+	}
+
+	/* we are here ! means a device is detected */
+
+	/* fill basic information */
+	pPciAgent->busNumber=bus;
+	pPciAgent->deviceNum=dev;
+	pPciAgent->function=func;
+
+	/* Fill the PCI Vendor ID and Device ID */
+
+	pPciAgent->venID = (pciData & PDVIR_VEN_ID_MASK) >> PDVIR_VEN_ID_OFFS;
+	pPciAgent->deviceID = (pciData & PDVIR_DEV_ID_MASK) >> PDVIR_DEV_ID_OFFS;
+
+	/* Read Status and command */
+	pciData = mvPciIfConfigRead(pciIf,
+							  bus,dev,func,
+							  PCI_STATUS_AND_COMMAND);
+
+
+	/* Fill related Status and Command information*/
+
+	if (pciData & PSCR_TAR_FAST_BB)
+	{
+		pPciAgent->isFastB2BCapable = MV_TRUE;
+	}
+	else
+	{
+		pPciAgent->isFastB2BCapable = MV_FALSE;
+	}
+
+	if (pciData & PSCR_CAP_LIST)
+	{
+		pPciAgent->isCapListSupport=MV_TRUE;
+	}
+	else
+	{
+		pPciAgent->isCapListSupport=MV_FALSE;
+	}
+
+	if (pciData & PSCR_66MHZ_EN)
+	{
+		pPciAgent->is66MHZCapable=MV_TRUE;
+	}
+	else
+	{
+		pPciAgent->is66MHZCapable=MV_FALSE;
+	}
+
+	/* Read Class Code and Revision */
+	pciData = mvPciIfConfigRead(pciIf,
+							  bus,dev,func,
+							  PCI_CLASS_CODE_AND_REVISION_ID);
+
+
+	pPciAgent->baseClassCode =
+		(pciData & PCCRIR_BASE_CLASS_MASK) >> PCCRIR_BASE_CLASS_OFFS;
+
+	pPciAgent->subClassCode =
+		(pciData & PCCRIR_SUB_CLASS_MASK) >> PCCRIR_SUB_CLASS_OFFS;
+
+	pPciAgent->progIf =
+		(pciData & PCCRIR_PROGIF_MASK) >> PCCRIR_PROGIF_OFFS;
+
+	pPciAgent->revisionID =
+		(pciData & PCCRIR_REVID_MASK) >> PCCRIR_REVID_OFFS;
+
+	/* Read  PCI_BIST_HDR_TYPE_LAT_TMR_CACHE_LINE */
+	pciData = mvPciIfConfigRead(pciIf,
+							  bus,dev,func,
+							  PCI_BIST_HDR_TYPE_LAT_TMR_CACHE_LINE);
+
+
+
+	pPciAgent->pciCacheLine=
+		(pciData & PBHTLTCLR_CACHELINE_MASK ) >> PBHTLTCLR_CACHELINE_OFFS;
+	pPciAgent->pciLatencyTimer=
+		(pciData & PBHTLTCLR_LATTIMER_MASK) >> PBHTLTCLR_LATTIMER_OFFS;
+
+	switch (pciData & PBHTLTCLR_HEADER_MASK)
+	{
+	case PBHTLTCLR_HEADER_STANDARD:
+
+		pPciAgent->pciHeader=MV_PCI_STANDARD;
+		break;
+	case PBHTLTCLR_HEADER_PCI2PCI_BRIDGE:
+
+		pPciAgent->pciHeader=MV_PCI_PCI2PCI_BRIDGE;
+		break;
+
+	}
+
+	if (pciData & PBHTLTCLR_MULTI_FUNC)
+	{
+		pPciAgent->isMultiFunction=MV_TRUE;
+	}
+	else
+	{
+		pPciAgent->isMultiFunction=MV_FALSE;
+	}
+
+	if (pciData & PBHTLTCLR_BISTCAP)
+	{
+		pPciAgent->isBISTCapable=MV_TRUE;
+	}
+	else
+	{
+		pPciAgent->isBISTCapable=MV_FALSE;
+	}
+
+
+	/* read this device pci bars */
+
+	pciDetectDeviceBars(pciIf,
+					  bus,dev,func,
+	 				 pPciAgent);
+
+
+	/* check if we are bridge*/
+	if ((pPciAgent->baseClassCode == PCI_BRIDGE_CLASS)&&
+		(pPciAgent->subClassCode == P2P_BRIDGE_SUB_CLASS_CODE))
+	{
+
+		/* Read  P2P_BUSSES_NUM */
+		pciData = mvPciIfConfigRead(pciIf,
+								  bus,dev,func,
+								  P2P_BUSSES_NUM);
+
+		pPciAgent->p2pPrimBusNum =
+			(pciData & PBM_PRIME_BUS_NUM_MASK) >> PBM_PRIME_BUS_NUM_OFFS;
+
+		pPciAgent->p2pSecBusNum =
+			(pciData & PBM_SEC_BUS_NUM_MASK) >> PBM_SEC_BUS_NUM_OFFS;
+
+		pPciAgent->p2pSubBusNum =
+			(pciData & PBM_SUB_BUS_NUM_MASK) >> PBM_SUB_BUS_NUM_OFFS;
+
+		pPciAgent->p2pSecLatencyTimer =
+			(pciData & PBM_SEC_LAT_TMR_MASK) >> PBM_SEC_LAT_TMR_OFFS;
+
+		/* Read  P2P_IO_BASE_LIMIT_SEC_STATUS */
+		pciData = mvPciIfConfigRead(pciIf,
+								  bus,dev,func,
+								  P2P_IO_BASE_LIMIT_SEC_STATUS);
+
+		pPciAgent->p2pSecStatus =
+			(pciData & PIBLSS_SEC_STATUS_MASK) >> PIBLSS_SEC_STATUS_OFFS;
+
+
+		pPciAgent->p2pIObase =
+			(pciData & PIBLSS_IO_BASE_MASK) << PIBLSS_IO_LIMIT_OFFS;
+
+		/* clear low address (should be zero)*/
+		pPciAgent->p2pIObase &= PIBLSS_HIGH_ADDR_MASK;
+
+		pPciAgent->p2pIOLimit =
+			(pciData & PIBLSS_IO_LIMIT_MASK);
+
+		/* fill low address with 0xfff */
+		pPciAgent->p2pIOLimit |= PIBLSS_LOW_ADDR_MASK;
+
+
+		switch ((pciData & PIBLSS_ADD_CAP_MASK) >> PIBLSS_ADD_CAP_OFFS)
+		{
+		case PIBLSS_ADD_CAP_16BIT:
+
+			pPciAgent->bIO32 = MV_FALSE;
+
+			break;
+		case PIBLSS_ADD_CAP_32BIT:
+
+			pPciAgent->bIO32 = MV_TRUE;
+
+			/* Read  P2P_IO_BASE_LIMIT_UPPER_16 */
+			pciData = mvPciIfConfigRead(pciIf,
+									  bus,dev,func,
+									  P2P_IO_BASE_LIMIT_UPPER_16);
+
+			pPciAgent->p2pIObase |=
+				(pciData & PRBU_IO_UPP_BASE_MASK) << PRBU_IO_UPP_LIMIT_OFFS;
+
+
+			pPciAgent->p2pIOLimit |=
+				(pciData & PRBU_IO_UPP_LIMIT_MASK);
+
+			break;
+
+		}
+
+
+		/* Read  P2P_MEM_BASE_LIMIT */
+		pciData = mvPciIfConfigRead(pciIf,
+								  bus,dev,func,
+								  P2P_MEM_BASE_LIMIT);
+
+		pPciAgent->p2pMemBase =
+			(pciData & PMBL_MEM_BASE_MASK) << PMBL_MEM_LIMIT_OFFS;
+
+		/* clear low address */
+		pPciAgent->p2pMemBase &= PMBL_HIGH_ADDR_MASK;
+
+		pPciAgent->p2pMemLimit =
+			(pciData & PMBL_MEM_LIMIT_MASK);
+
+		/* add 0xfffff */
+		pPciAgent->p2pMemLimit |= PMBL_LOW_ADDR_MASK;
+
+
+		/* Read  P2P_PREF_MEM_BASE_LIMIT */
+		pciData = mvPciIfConfigRead(pciIf,
+								  bus,dev,func,
+								  P2P_PREF_MEM_BASE_LIMIT);
+
+
+		pPciAgent->p2pPrefMemBase =
+			(pciData & PRMBL_PREF_MEM_BASE_MASK) << PRMBL_PREF_MEM_LIMIT_OFFS;
+
+		/* get high address only */
+		pPciAgent->p2pPrefMemBase &= PRMBL_HIGH_ADDR_MASK;
+
+
+
+		pPciAgent->p2pPrefMemLimit =
+			(pciData & PRMBL_PREF_MEM_LIMIT_MASK);
+
+		/* add 0xfffff */
+		pPciAgent->p2pPrefMemLimit |= PRMBL_LOW_ADDR_MASK;
+
+		switch (pciData & PRMBL_ADD_CAP_MASK)
+		{
+		case PRMBL_ADD_CAP_32BIT:
+
+			pPciAgent->bPrefMem64 = MV_FALSE;
+
+			/* Read  P2P_PREF_BASE_UPPER_32 */
+			pPciAgent->p2pPrefBaseUpper32Bits = 0;
+
+			/* Read  P2P_PREF_LIMIT_UPPER_32 */
+			pPciAgent->p2pPrefLimitUpper32Bits = 0;
+
+			break;
+		case PRMBL_ADD_CAP_64BIT:
+
+			pPciAgent->bPrefMem64 = MV_TRUE;
+
+			/* Read  P2P_PREF_BASE_UPPER_32 */
+			pPciAgent->p2pPrefBaseUpper32Bits = mvPciIfConfigRead(pciIf,
+									  bus,dev,func,
+									  P2P_PREF_BASE_UPPER_32);
+
+			/* Read  P2P_PREF_LIMIT_UPPER_32 */
+			pPciAgent->p2pPrefLimitUpper32Bits = mvPciIfConfigRead(pciIf,
+									  bus,dev,func,
+									  P2P_PREF_LIMIT_UPPER_32);
+
+			break;
+
+		}
+
+	}
+	else /* no bridge */
+	{
+		/* Read  PCI_SUBSYS_ID_AND_SUBSYS_VENDOR_ID */
+		pciData = mvPciIfConfigRead(pciIf,
+								  bus,dev,func,
+								  PCI_SUBSYS_ID_AND_SUBSYS_VENDOR_ID);
+
+
+		pPciAgent->subSysVenID =
+			(pciData & PSISVIR_VENID_MASK) >> PSISVIR_VENID_OFFS;
+		pPciAgent->subSysID =
+			(pciData & PSISVIR_DEVID_MASK) >> PSISVIR_DEVID_OFFS;
+
+
+		/* Read  PCI_EXPANSION_ROM_BASE_ADDR_REG */
+		pciData = mvPciIfConfigRead(pciIf,
+								  bus,dev,func,
+								  PCI_EXPANSION_ROM_BASE_ADDR_REG);
+
+
+		if (pciData & PERBAR_EXPROMEN)
+		{
+			pPciAgent->isExpRom = MV_TRUE;
+		}
+		else
+		{
+			pPciAgent->isExpRom = MV_FALSE;
+		}
+
+		pPciAgent->expRomAddr =
+			(pciData & PERBAR_BASE_MASK) >> PERBAR_BASE_OFFS;
+
+	}
+
+
+	if (MV_TRUE == pPciAgent->isCapListSupport)
+	{
+		/* Read  PCI_CAPABILTY_LIST_POINTER */
+		pciData = mvPciIfConfigRead(pciIf,
+								  bus,dev,func,
+								  PCI_CAPABILTY_LIST_POINTER);
+
+		pPciAgent->capListPointer =
+			(pciData & PCLPR_CAPPTR_MASK) >> PCLPR_CAPPTR_OFFS;
+
+	}
+
+	/* Read  PCI_INTERRUPT_PIN_AND_LINE */
+	pciData = mvPciIfConfigRead(pciIf,
+							  bus,dev,func,
+							  PCI_INTERRUPT_PIN_AND_LINE);
+
+
+	pPciAgent->irqLine=
+		(pciData & PIPLR_INTLINE_MASK) >> PIPLR_INTLINE_OFFS;
+
+	pPciAgent->intPin=
+		(MV_PCI_INT_PIN)(pciData & PIPLR_INTPIN_MASK) >> PIPLR_INTPIN_OFFS;
+
+	pPciAgent->minGrant=
+		(pciData & PIPLR_MINGRANT_MASK) >> PIPLR_MINGRANT_OFFS;
+	pPciAgent->maxLatency=
+		(pciData & PIPLR_MAXLATEN_MASK) >> PIPLR_MAXLATEN_OFFS;
+
+	mvPciClassNameGet(pPciAgent->baseClassCode,
+					  (MV_8 *)pPciAgent->type);
+
+	return MV_OK;
+
+
+}
+
+/*******************************************************************************
+* pciDetectDeviceBars - Detect a pci device bars
+*
+* DESCRIPTION:
+*	This function detects all pci agent bars
+*
+* INPUT:
+*       pciIf       - PCI Interface
+*		bus		-	Bus number
+*		dev		- 	Device number
+*		func	-	Function number
+*
+*
+*
+* OUTPUT:
+*       pPciAgent - pointer to the pci agent filled with its information
+*
+* RETURN:
+*       detected bars number
+*
+*******************************************************************************/
+static MV_U32 pciDetectDeviceBars(MV_U32 pciIf,
+									MV_U32 bus,
+									MV_U32 dev,
+									MV_U32 func,
+									MV_PCI_DEVICE *pPciAgent)
+{
+	MV_U32 pciData,barIndex,detectedBar=0;
+	MV_U32 tmpBaseHigh=0,tmpBaseLow=0;
+	MV_U32 pciMaxBars=0;
+
+	pPciAgent->barsNum=0;
+
+	/* check if we are bridge*/
+	if ((pPciAgent->baseClassCode == PCI_BRIDGE_CLASS)&&
+		(pPciAgent->subClassCode == P2P_BRIDGE_SUB_CLASS_CODE))
+	{
+		pciMaxBars = 2;
+	}
+	else /* no bridge */
+	{
+		pciMaxBars = 6;
+	}
+
+	/* read this device pci bars */
+	for (barIndex = 0 ; barIndex < pciMaxBars ; barIndex++ )
+	{
+		/* Read  PCI_MEMORY_BAR_BASE_ADDR */
+		tmpBaseLow = pciData = mvPciIfConfigRead(pciIf,
+									   bus,dev,func,
+						               PCI_MEMORY_BAR_BASE_ADDR(barIndex));
+
+		pPciAgent->pciBar[detectedBar].barOffset =
+			PCI_MEMORY_BAR_BASE_ADDR(barIndex);
+
+		/* check if the bar is 32bit or 64bit bar */
+		switch (pciData & PBBLR_TYPE_MASK)
+		{
+		case PBBLR_TYPE_32BIT_ADDR:
+			pPciAgent->pciBar[detectedBar].barType = PCI_32BIT_BAR;
+			break;
+		case PBBLR_TYPE_64BIT_ADDR:
+			pPciAgent->pciBar[detectedBar].barType = PCI_64BIT_BAR;
+			break;
+
+		}
+
+		/* check if it is memory or IO bar */
+		if (pciData & PBBLR_IOSPACE)
+		{
+			pPciAgent->pciBar[detectedBar].barMapping=PCI_IO_BAR;
+		}
+		else
+		{
+			pPciAgent->pciBar[detectedBar].barMapping=PCI_MEMORY_BAR;
+		}
+
+		/* if it is memory bar then check if it is prefetchable */
+		if (PCI_MEMORY_BAR == pPciAgent->pciBar[detectedBar].barMapping)
+		{
+			if (pciData & PBBLR_PREFETCH_EN)
+			{
+				pPciAgent->pciBar[detectedBar].isPrefetchable = MV_TRUE;
+			}
+			else
+			{
+				pPciAgent->pciBar[detectedBar].isPrefetchable = MV_FALSE;
+			}
+
+            pPciAgent->pciBar[detectedBar].barBaseLow =
+				pciData & PBBLR_MEM_BASE_MASK;
+
+
+		}
+		else /* IO Bar */
+		{
+			pPciAgent->pciBar[detectedBar].barBaseLow =
+				pciData & PBBLR_IO_BASE_MASK;
+
+		}
+
+		pPciAgent->pciBar[detectedBar].barBaseHigh=0;
+
+		if (PCI_64BIT_BAR == pPciAgent->pciBar[detectedBar].barType)
+		{
+			barIndex++;
+
+			tmpBaseHigh = pPciAgent->pciBar[detectedBar].barBaseHigh =
+				mvPciIfConfigRead(pciIf,
+								bus,dev,func,
+								PCI_MEMORY_BAR_BASE_ADDR(barIndex));
+
+
+		}
+
+		/* calculating full base address (64bit) */
+		pPciAgent->pciBar[detectedBar].barBaseAddr =
+			(MV_U64)pPciAgent->pciBar[detectedBar].barBaseHigh;
+
+		pPciAgent->pciBar[detectedBar].barBaseAddr <<= 32;
+
+		pPciAgent->pciBar[detectedBar].barBaseAddr |=
+			(MV_U64)pPciAgent->pciBar[detectedBar].barBaseLow;
+
+
+
+		/* get the sizes of the the bar */
+
+		pPciAgent->pciBar[detectedBar].barSizeHigh=0;
+
+		if ((PCI_64BIT_BAR == pPciAgent->pciBar[detectedBar].barType) &&
+			(PCI_MEMORY_BAR == pPciAgent->pciBar[detectedBar].barMapping))
+
+		{
+			/* write oxffffffff to the bar to get the size */
+			/* start with sizelow ( original value was saved in tmpBaseLow ) */
+			mvPciIfConfigWrite(pciIf,
+							bus,dev,func,
+							PCI_MEMORY_BAR_BASE_ADDR(barIndex-1),
+							0xffffffff);
+
+			/* read size */
+			pPciAgent->pciBar[detectedBar].barSizeLow =
+				mvPciIfConfigRead(pciIf,
+								bus,dev,func,
+								PCI_MEMORY_BAR_BASE_ADDR(barIndex-1));
+
+
+
+			/* restore original value */
+			mvPciIfConfigWrite(pciIf,
+							bus,dev,func,
+							PCI_MEMORY_BAR_BASE_ADDR(barIndex-1),
+							tmpBaseLow);
+
+
+			/* now do the same for BaseHigh */
+
+			/* write oxffffffff to the bar to get the size */
+			mvPciIfConfigWrite(pciIf,
+							bus,dev,func,
+							PCI_MEMORY_BAR_BASE_ADDR(barIndex),
+							0xffffffff);
+
+			/* read size */
+			pPciAgent->pciBar[detectedBar].barSizeHigh =
+				mvPciIfConfigRead(pciIf,
+								bus,dev,func,
+								PCI_MEMORY_BAR_BASE_ADDR(barIndex));
+
+			/* restore original value */
+			mvPciIfConfigWrite(pciIf,
+							bus,dev,func,
+							PCI_MEMORY_BAR_BASE_ADDR(barIndex),
+							tmpBaseHigh);
+
+			if ((0 == pPciAgent->pciBar[detectedBar].barSizeLow)&&
+				(0 == pPciAgent->pciBar[detectedBar].barSizeHigh))
+			{
+				/* this bar is not applicable for this device,
+				   ignore all previous settings and check the next bar*/
+
+				/* we though this was a 64bit bar , and it seems this
+				   was wrong ! so decrement barIndex */
+				barIndex--;
+				continue;
+			}
+
+			/* calculate the full 64 bit size  */
+
+			if (0 != pPciAgent->pciBar[detectedBar].barSizeHigh)
+			{
+				pPciAgent->pciBar[detectedBar].barSizeLow &= PBBLR_MEM_BASE_MASK;
+
+				pPciAgent->pciBar[detectedBar].barSizeLow =
+					~pPciAgent->pciBar[detectedBar].barSizeLow + 1;
+
+				pPciAgent->pciBar[detectedBar].barSizeHigh = 0;
+
+			}
+			else
+			{
+
+				pPciAgent->pciBar[detectedBar].barSizeLow &= PBBLR_MEM_BASE_MASK;
+
+				pPciAgent->pciBar[detectedBar].barSizeLow =
+					~pPciAgent->pciBar[detectedBar].barSizeLow + 1;
+
+				pPciAgent->pciBar[detectedBar].barSizeHigh = 0;
+
+			}
+
+
+
+		}
+		else /* 32bit bar */
+		{
+			/* write oxffffffff to the bar to get the size */
+			mvPciIfConfigWrite(pciIf,
+							bus,dev,func,
+							PCI_MEMORY_BAR_BASE_ADDR(barIndex),
+							0xffffffff);
+
+			/* read size */
+			pPciAgent->pciBar[detectedBar].barSizeLow =
+				mvPciIfConfigRead(pciIf,
+								bus,dev,func,
+								PCI_MEMORY_BAR_BASE_ADDR(barIndex));
+
+			if (0 == pPciAgent->pciBar[detectedBar].barSizeLow)
+			{
+				/* this bar is not applicable for this device,
+				   ignore all previous settings and check the next bar*/
+				continue;
+			}
+
+
+			/* restore original value */
+			mvPciIfConfigWrite(pciIf,
+							bus,dev,func,
+							PCI_MEMORY_BAR_BASE_ADDR(barIndex),
+							tmpBaseLow);
+
+		/* calculate size low */
+
+			if (PCI_MEMORY_BAR == pPciAgent->pciBar[detectedBar].barMapping)
+			{
+				pPciAgent->pciBar[detectedBar].barSizeLow &= PBBLR_MEM_BASE_MASK;
+			}
+			else
+			{
+				pPciAgent->pciBar[detectedBar].barSizeLow &= PBBLR_IO_BASE_MASK;
+			}
+
+			pPciAgent->pciBar[detectedBar].barSizeLow =
+				~pPciAgent->pciBar[detectedBar].barSizeLow + 1;
+
+			pPciAgent->pciBar[detectedBar].barSizeHigh = 0;
+			pPciAgent->pciBar[detectedBar].barSize =
+				(MV_U64)pPciAgent->pciBar[detectedBar].barSizeLow;
+
+
+		}
+
+		/* we are here ! this means we have already detected a bar for
+		this device , now move on */
+
+		detectedBar++;
+		pPciAgent->barsNum++;
+	}
+
+	return detectedBar;
+}
+
+
+/*******************************************************************************
+* mvPciClassNameGet - get PCI  class name
+*
+* DESCRIPTION:
+*		This function returns the PCI class name
+*
+* INPUT:
+*       baseClassCode       - Base Class Code.
+*
+* OUTPUT:
+*       pType - the class name
+*
+* RETURN:
+*       MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciClassNameGet(MV_U32 baseClassCode, MV_8 *pType)
+{
+
+    switch(baseClassCode)
+    {
+        case 0x0:
+            strcpy(pType,"Old generation device");
+            break;
+        case 0x1:
+            strcpy(pType,"Mass storage controller");
+            break;
+        case 0x2:
+            strcpy(pType,"Network controller");
+            break;
+        case 0x3:
+            strcpy(pType,"Display controller");
+            break;
+        case 0x4:
+            strcpy(pType,"Multimedia device");
+            break;
+        case 0x5:
+            strcpy(pType,"Memory controller");
+            break;
+        case 0x6:
+            strcpy(pType,"Bridge Device");
+            break;
+        case 0x7:
+            strcpy(pType,"Simple Communication controllers");
+            break;
+        case 0x8:
+            strcpy(pType,"Base system peripherals");
+            break;
+        case 0x9:
+            strcpy(pType,"Input Devices");
+            break;
+        case 0xa:
+            strcpy(pType,"Docking stations");
+            break;
+        case 0xb:
+            strcpy(pType,"Processors");
+            break;
+        case 0xc:
+            strcpy(pType,"Serial bus controllers");
+            break;
+        case 0xd:
+            strcpy(pType,"Wireless controllers");
+            break;
+        case 0xe:
+            strcpy(pType,"Intelligent I/O controllers");
+            break;
+        case 0xf:
+            strcpy(pType,"Satellite communication controllers");
+            break;
+        case 0x10:
+            strcpy(pType,"Encryption/Decryption controllers");
+            break;
+        case 0x11:
+            strcpy(pType,"Data acquisition and signal processing controllers");
+            break;
+        default:
+            strcpy(pType,"Unknown device");
+            break;
+    }
+
+	return MV_OK;
+
+}
+
+
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/pci_util/mvPciUtils.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/pci_util/mvPciUtils.h
new file mode 100644
index 0000000000..2ee0b1738b
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/pci_util/mvPciUtils.h
@@ -0,0 +1,323 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvPciUtilsh
+#define __INCmvPciUtilsh
+
+/* 
+This module only support scanning of Header type 00h of pci devices 
+There is no suppotr for Header type 01h of pci devices  ( PCI bridges )
+*/
+
+/* includes */
+#include "mvSysHwConfig.h"
+#include "pci-if/mvPciIf.h"
+#include "pci/mvPciRegs.h"
+
+
+
+/* PCI base address low bar mask */
+#define PCI_ERROR_CODE                      0xffffffff
+
+#define PCI_BRIDGE_CLASS					0x6
+#define P2P_BRIDGE_SUB_CLASS_CODE			0x4
+
+
+#define P2P_BUSSES_NUM						0x18
+#define P2P_IO_BASE_LIMIT_SEC_STATUS		0x1C
+#define P2P_MEM_BASE_LIMIT					0x20
+#define P2P_PREF_MEM_BASE_LIMIT				0x24
+#define P2P_PREF_BASE_UPPER_32				0x28
+#define P2P_PREF_LIMIT_UPPER_32				0x2C
+#define P2P_IO_BASE_LIMIT_UPPER_16			0x30
+#define P2P_EXP_ROM							0x38
+
+/* P2P_BUSSES_NUM  (PBM) */
+
+#define PBM_PRIME_BUS_NUM_OFFS				0
+#define PBM_PRIME_BUS_NUM_MASK				(0xff << PBM_PRIME_BUS_NUM_OFFS)
+
+#define PBM_SEC_BUS_NUM_OFFS				8
+#define PBM_SEC_BUS_NUM_MASK				(0xff << PBM_SEC_BUS_NUM_OFFS)
+
+#define PBM_SUB_BUS_NUM_OFFS				16
+#define PBM_SUB_BUS_NUM_MASK				(0xff << PBM_SUB_BUS_NUM_OFFS)
+
+#define PBM_SEC_LAT_TMR_OFFS				24
+#define PBM_SEC_LAT_TMR_MASK				(0xff << PBM_SEC_LAT_TMR_OFFS)
+
+/* P2P_IO_BASE_LIMIT_SEC_STATUS (PIBLSS) */
+
+#define PIBLSS_IO_BASE_OFFS					0
+#define PIBLSS_IO_BASE_MASK					(0xff << PIBLSS_IO_BASE_OFFS)
+
+#define PIBLSS_ADD_CAP_OFFS					0
+#define PIBLSS_ADD_CAP_MASK 				(0x3 << PIBLSS_ADD_CAP_OFFS)
+#define PIBLSS_ADD_CAP_16BIT 				(0x0 << PIBLSS_ADD_CAP_OFFS)
+#define PIBLSS_ADD_CAP_32BIT 				(0x1 << PIBLSS_ADD_CAP_OFFS)
+
+#define PIBLSS_LOW_ADDR_OFFS				0
+#define PIBLSS_LOW_ADDR_MASK				(0xFFF << PIBLSS_LOW_ADDR_OFFS)
+
+#define PIBLSS_HIGH_ADDR_OFFS				12
+#define PIBLSS_HIGH_ADDR_MASK				(0xF << PIBLSS_HIGH_ADDR_OFFS)
+
+#define PIBLSS_IO_LIMIT_OFFS				8
+#define PIBLSS_IO_LIMIT_MASK				(0xff << PIBLSS_IO_LIMIT_OFFS)
+
+#define PIBLSS_SEC_STATUS_OFFS				16
+#define PIBLSS_SEC_STATUS_MASK				(0xffff << PIBLSS_SEC_STATUS_OFFS)
+
+
+/* P2P_MEM_BASE_LIMIT (PMBL)*/
+
+#define PMBL_MEM_BASE_OFFS					0
+#define PMBL_MEM_BASE_MASK					(0xffff << PMBL_MEM_BASE_OFFS)
+
+#define PMBL_MEM_LIMIT_OFFS					16
+#define PMBL_MEM_LIMIT_MASK					(0xffff << PMBL_MEM_LIMIT_OFFS)
+
+
+#define PMBL_LOW_ADDR_OFFS					0
+#define PMBL_LOW_ADDR_MASK					(0xFFFFF << PMBL_LOW_ADDR_OFFS)
+
+#define PMBL_HIGH_ADDR_OFFS					20
+#define PMBL_HIGH_ADDR_MASK					(0xFFF << PMBL_HIGH_ADDR_OFFS)
+
+
+/* P2P_PREF_MEM_BASE_LIMIT (PRMBL) */
+
+#define PRMBL_PREF_MEM_BASE_OFFS			0
+#define PRMBL_PREF_MEM_BASE_MASK			(0xffff << PRMBL_PREF_MEM_BASE_OFFS)
+
+#define PRMBL_PREF_MEM_LIMIT_OFFS			16
+#define PRMBL_PREF_MEM_LIMIT_MASK			(0xffff<<PRMBL_PREF_MEM_LIMIT_OFFS)
+
+#define PRMBL_LOW_ADDR_OFFS					0
+#define PRMBL_LOW_ADDR_MASK					(0xFFFFF << PRMBL_LOW_ADDR_OFFS)
+
+#define PRMBL_HIGH_ADDR_OFFS				20
+#define PRMBL_HIGH_ADDR_MASK				(0xFFF << PRMBL_HIGH_ADDR_OFFS)
+
+#define PRMBL_ADD_CAP_OFFS					0
+#define PRMBL_ADD_CAP_MASK					(0xf << PRMBL_ADD_CAP_OFFS)
+#define PRMBL_ADD_CAP_32BIT					(0x0 << PRMBL_ADD_CAP_OFFS)
+#define PRMBL_ADD_CAP_64BIT					(0x1 << PRMBL_ADD_CAP_OFFS)
+
+/* P2P_IO_BASE_LIMIT_UPPER_16 (PIBLU) */
+
+#define PRBU_IO_UPP_BASE_OFFS				0
+#define PRBU_IO_UPP_BASE_MASK				(0xffff << PRBU_IO_UPP_BASE_OFFS)
+
+#define PRBU_IO_UPP_LIMIT_OFFS				16
+#define PRBU_IO_UPP_LIMIT_MASK				(0xffff << PRBU_IO_UPP_LIMIT_OFFS)
+
+
+/* typedefs */
+
+typedef enum _mvPciBarMapping
+{
+    PCI_MEMORY_BAR, 
+    PCI_IO_BAR, 
+    PCI_NO_MAPPING
+}MV_PCI_BAR_MAPPING;
+
+typedef enum _mvPciBarType
+{
+    PCI_32BIT_BAR, 
+    PCI_64BIT_BAR
+}MV_PCI_BAR_TYPE;
+
+typedef enum _mvPciIntPin
+{
+    MV_PCI_INTA = 1,
+    MV_PCI_INTB = 2,
+    MV_PCI_INTC = 3,
+    MV_PCI_INTD = 4
+}MV_PCI_INT_PIN;
+
+typedef enum _mvPciHeader
+{
+    MV_PCI_STANDARD,
+    MV_PCI_PCI2PCI_BRIDGE
+
+}MV_PCI_HEADER;
+
+
+/* BAR structure */
+typedef struct _pciBar
+{
+    MV_U32 barOffset;
+    MV_U32 barBaseLow;
+    MV_U32 barBaseHigh;
+    MV_U32 barSizeLow;
+    MV_U32 barSizeHigh;
+    /* The 'barBaseAddr' is a 64-bit variable
+       that will contain the TOTAL base address
+       value achived by combining both the 'barBaseLow'
+       and the 'barBaseHigh' parameters as follows:
+
+       BIT: 63          31         0
+            |           |         |
+            barBaseHigh barBaseLow */
+    MV_U64 barBaseAddr;
+    /* The 'barSize' is a 64-bit variable
+       that will contain the TOTAL size achived
+       by combining both the 'barSizeLow' and
+       the 'barSizeHigh' parameters as follows:
+
+       BIT: 63          31         0
+            |           |         |
+            barSizeHigh barSizeLow
+
+       NOTE: The total size described above
+             is AFTER the size calculation as
+             described in PCI spec rev2.2 */
+    MV_U64 barSize;
+    MV_BOOL            isPrefetchable;
+    MV_PCI_BAR_TYPE       barType;
+    MV_PCI_BAR_MAPPING    barMapping;
+
+
+} PCI_BAR;
+
+/* Device information structure */
+typedef struct _mvPciDevice
+{
+    /* Device specific information */
+	MV_U32			busNumber; 	/* Pci agent bus number */
+    MV_U32			deviceNum;	/* Pci agent device number */
+    MV_U32			function;	/* Pci agent function number */
+
+	MV_U32			venID;		/* Pci agent Vendor ID */
+    MV_U32			deviceID;	/* Pci agent Device ID */
+
+    MV_BOOL			isFastB2BCapable;	/* Capability of Fast Back to Back 
+										   transactions */
+	MV_BOOL			isCapListSupport;	/* Support of Capability list */
+	MV_BOOL			is66MHZCapable;		/* 66MHZ support */
+
+    MV_U32			baseClassCode;		/* Pci agent base Class Code */
+    MV_U32			subClassCode;		/* Pci agent sub Class Code */
+    MV_U32			progIf;				/* Pci agent Programing interface */
+	MV_U32			revisionID;
+
+    PCI_BAR			pciBar[6]; 			/* Pci agent bar list */
+
+	MV_U32			p2pPrimBusNum;		/* P2P Primary Bus number*/
+	MV_U32			p2pSecBusNum;		/* P2P Secondary Bus Number*/
+	MV_U32			p2pSubBusNum;		/* P2P Subordinate bus Number */
+	MV_U32			p2pSecLatencyTimer;	/* P2P Econdary Latency Timer*/
+	MV_U32			p2pIObase;			/* P2P IO Base */
+	MV_U32			p2pIOLimit;			/* P2P IO Linit */
+	MV_BOOL			bIO32;	
+	MV_U32			p2pSecStatus;		/* P2P Secondary Status */
+	MV_U32			p2pMemBase;			/* P2P Memory Space */
+	MV_U32			p2pMemLimit;		/* P2P Memory Limit*/
+	MV_U32			p2pPrefMemBase;		/* P2P Prefetchable Mem Base*/
+	MV_U32			p2pPrefMemLimit;	/* P2P Prefetchable Memory Limit*/
+	MV_BOOL			bPrefMem64;	
+	MV_U32			p2pPrefBaseUpper32Bits;/* P2P Prefetchable upper 32 bits*/
+	MV_U32			p2pPrefLimitUpper32Bits;/* P2P prefetchable limit upper 32*/
+
+
+	MV_U32			pciCacheLine;		/* Pci agent cache line */
+	MV_U32			pciLatencyTimer;	/* Pci agent Latency timer  */
+    MV_PCI_HEADER	pciHeader;			/* Pci agent header type*/
+    MV_BOOL			isMultiFunction;	/* Multi function support */
+	MV_BOOL			isBISTCapable;		/* Self test capable */
+
+	MV_U32			subSysID;			/* Sub System ID */
+	MV_U32			subSysVenID;		/* Sub System Vendor ID */
+
+	MV_BOOL			isExpRom;			/* Expantion Rom support */
+	MV_U32			expRomAddr;			/* Expantion Rom pointer */
+
+	MV_U32			capListPointer;		/* Capability list pointer */
+
+	MV_U32			irqLine;		/* IRQ line  */
+	MV_PCI_INT_PIN	intPin;			/* Interrupt pin */
+	MV_U32			minGrant;		/* Minimum grant*/
+	MV_U32			maxLatency;		/* Maximum latency*/
+
+	MV_U32 			funtionsNum;	/* pci agent total functions number */
+
+	MV_U32 			barsNum;
+    MV_U8           type[60];		/* class name of the pci agent */
+
+
+} MV_PCI_DEVICE;
+
+/* PCI gloabl functions */
+MV_STATUS mvPciClassNameGet(MV_U32 classCode, MV_8 *pType);
+
+
+/* Performs a full scan on both PCIs and returns all possible details on the
+   agents found on the bus. */
+MV_STATUS mvPciScan(MV_U32 pciIf,
+					MV_PCI_DEVICE *pPciAgents,
+					MV_U32 *pPciAgentsNum);
+
+
+#endif /* #ifndef __INCmvPciUtilsh */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPci.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPci.c
new file mode 100644
index 0000000000..4a087343de
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPci.c
@@ -0,0 +1,1047 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+#include "pci/mvPci.h"
+
+#include "ctrlEnv/mvCtrlEnvLib.h"
+
+/* defines  */       
+#ifdef MV_DEBUG         
+	#define DB(x)	x
+#else                
+	#define DB(x)    
+#endif	             
+					 
+
+
+MV_VOID mvPciHalInit(MV_U32 pciIf, MV_PCI_MOD pciIfmod)
+{
+        if (MV_PCI_MOD_HOST == pciIfmod)
+    {
+
+                mvPciLocalBusNumSet(pciIf, PCI_HOST_BUS_NUM(pciIf));
+                mvPciLocalDevNumSet(pciIf, PCI_HOST_DEV_NUM(pciIf));
+        
+                /* Local device master Enable */
+                mvPciMasterEnable(pciIf, MV_TRUE);
+        
+                /* Local device slave Enable */
+                mvPciSlaveEnable(pciIf, mvPciLocalBusNumGet(pciIf),
+                                                 mvPciLocalDevNumGet(pciIf), MV_TRUE);
+        }
+        /* enable CPU-2-PCI ordering */
+        MV_REG_BIT_SET(PCI_CMD_REG(0), PCR_CPU_TO_PCI_ORDER_EN);
+}
+
+/*******************************************************************************
+* mvPciCommandSet - Set PCI comman register value.
+*
+* DESCRIPTION:
+*       This function sets a given PCI interface with its command register 
+*       value.
+*
+* INPUT:
+*       pciIf   - PCI interface number.
+*       command - 32bit value to be written to comamnd register.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_BAD_PARAM if pciIf is not in range otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciCommandSet(MV_U32 pciIf, MV_U32 command)
+{
+    MV_U32 locBusNum, locDevNum, regVal;
+
+    locBusNum =  mvPciLocalBusNumGet(pciIf);
+    locDevNum =  mvPciLocalDevNumGet(pciIf);
+
+	/* Parameter checking   */
+	if (pciIf >= mvCtrlPciMaxIfGet())
+	{
+		mvOsPrintf("mvPciCommandSet: ERR. Invalid PCI IF num %d\n", pciIf);
+		return MV_BAD_PARAM;
+	}
+
+	/* Set command register */
+	MV_REG_WRITE(PCI_CMD_REG(pciIf), command);
+
+    /* Upodate device max outstanding split tarnsaction */
+    if ((command & PCR_CPU_TO_PCI_ORDER_EN) && 
+        (command & PCR_PCI_TO_CPU_ORDER_EN))
+    {
+        /* Read PCI-X command register */
+        regVal = mvPciConfigRead (pciIf, locBusNum, locDevNum, 0, PCIX_COMMAND);
+                        
+        /* clear bits 22:20 */
+        regVal &= 0xff8fffff;
+
+        /* set reset value */
+        regVal |= (0x3 << 20);
+        
+        /* Write back the value */
+        mvPciConfigWrite (pciIf, locBusNum, locDevNum, 0, PCIX_COMMAND, regVal);
+    }
+
+	return MV_OK;
+
+
+}
+
+
+/*******************************************************************************
+* mvPciModeGet - Get PCI interface mode.
+*
+* DESCRIPTION:
+*       This function returns the given PCI interface mode.
+*
+* INPUT:
+*       pciIf   - PCI interface number.
+*
+* OUTPUT:
+*       pPciMode - Pointer to PCI mode structure.
+*
+* RETURN:
+*       MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciModeGet(MV_U32 pciIf, MV_PCI_MODE *pPciMode)
+{
+	MV_U32 pciMode;
+
+	/* Parameter checking   */
+	if (pciIf >= mvCtrlPciMaxIfGet())
+	{
+		mvOsPrintf("mvPciModeGet: ERR. Invalid PCI interface %d\n", pciIf);
+		return MV_BAD_PARAM;
+	}
+	if (NULL == pPciMode)
+	{
+		mvOsPrintf("mvPciModeGet: ERR. pPciMode = NULL  \n");
+		return MV_BAD_PARAM;
+	}
+
+	/* Read pci mode register */
+	pciMode = MV_REG_READ(PCI_MODE_REG(pciIf));
+	
+	switch (pciMode & PMR_PCI_MODE_MASK)
+	{
+		case PMR_PCI_MODE_CONV:
+            pPciMode->pciType  = MV_PCI_CONV;
+
+			if (MV_REG_READ(PCI_DLL_CTRL_REG(pciIf)) & PDC_DLL_EN)
+			{
+				pPciMode->pciSpeed = 66000000; /* 66MHZ */
+			}
+			else
+			{
+				pPciMode->pciSpeed = 33000000; /* 33MHZ */
+			}
+			
+			break;
+		
+		case PMR_PCI_MODE_PCIX_66MHZ:	
+			pPciMode->pciType  = MV_PCIX;
+			pPciMode->pciSpeed = 66000000; /* 66MHZ */	
+			break;
+		
+		case PMR_PCI_MODE_PCIX_100MHZ:	
+			pPciMode->pciType  = MV_PCIX;
+			pPciMode->pciSpeed = 100000000; /* 100MHZ */	
+			break;
+		
+		case PMR_PCI_MODE_PCIX_133MHZ:	
+			pPciMode->pciType  = MV_PCIX;
+			pPciMode->pciSpeed = 133000000; /* 133MHZ */	
+			break;
+
+		default:
+			{
+				mvOsPrintf("mvPciModeGet: ERR. Non existing mode !!\n");
+				return MV_ERROR;
+			}
+	}
+
+	switch (pciMode & PMR_PCI_64_MASK)
+	{
+		case PMR_PCI_64_64BIT:
+			pPciMode->pciWidth = MV_PCI_64;
+			break;
+		
+		case PMR_PCI_64_32BIT:
+            pPciMode->pciWidth = MV_PCI_32;
+            break;
+		
+		default:
+			{
+				mvOsPrintf("mvPciModeGet: ERR. Non existing mode !!\n");
+				return MV_ERROR;
+			}
+	}
+	
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvPciRetrySet - Set PCI retry counters
+*
+* DESCRIPTION:
+*       This function specifies the number of times the PCI controller 
+*       retries a transaction before it quits.
+*       Applies to the PCI Master when acting as a requester.
+*       Applies to the PCI slave when acting as a completer (PCI-X mode).
+*       A 0x00 value means a "retry forever".
+*
+* INPUT:
+*       pciIf   - PCI interface number.
+*       counter - Number of times PCI controller retry. Use counter value 
+*                 up to PRR_RETRY_CNTR_MAX.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciRetrySet(MV_U32 pciIf, MV_U32 counter)
+{
+	MV_U32 pciRetry;
+
+	/* Parameter checking   */
+	if (pciIf >= mvCtrlPciMaxIfGet())
+	{
+		mvOsPrintf("mvPciRetrySet: ERR. Invalid PCI interface %d\n", pciIf);
+		return MV_BAD_PARAM;
+	}
+
+	if (counter >= PRR_RETRY_CNTR_MAX)
+	{
+		mvOsPrintf("mvPciRetrySet: ERR. Invalid counter: %d\n", counter);
+		return MV_BAD_PARAM;
+
+	}
+
+	/* Reading PCI retry register */
+    pciRetry  = MV_REG_READ(PCI_RETRY_REG(pciIf));
+
+	pciRetry &= ~PRR_RETRY_CNTR_MASK;
+
+	pciRetry |= (counter << PRR_RETRY_CNTR_OFFS);
+
+	/* write new value */
+	MV_REG_WRITE(PCI_RETRY_REG(pciIf), pciRetry);
+
+	return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvPciDiscardTimerSet - Set PCI discard timer
+*
+* DESCRIPTION:
+*       This function set PCI discard timer.
+*       In conventional PCI mode:
+*       Specifies the number of PCLK cycles the PCI slave keeps a non-accessed
+*       read buffers (non-completed delayed read) before invalidate the buffer.
+*       Set to '0' to disable the timer. The PCI slave waits for delayed 
+*       read completion forever.
+*       In PCI-X mode:
+*       Specifies the number of PCLK cycles the PCI master waits for split
+*       completion transaction, before it invalidates the pre-allocated read
+*       buffer.
+*       Set to '0' to disable the timer. The PCI master waits for split 
+*       completion forever.
+*       NOTE: Must be set to a number greater than MV_PCI_MAX_DISCARD_CLK, 
+*       unless using the "wait for ever" setting 0x0.
+*       NOTE: Must not be updated while there are pending read requests.
+*
+* INPUT:
+*       pciIf      - PCI interface number.
+*       pClkCycles - Number of PCI clock cycles.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciDiscardTimerSet(MV_U32 pciIf, MV_U32 pClkCycles)
+{
+	MV_U32 pciDiscardTimer;
+
+	/* Parameter checking   */
+	if (pciIf >= mvCtrlPciMaxIfGet())
+	{
+		mvOsPrintf("mvPciDiscardTimerSet: ERR. Invalid PCI interface %d\n", 
+																		pciIf);
+		return MV_BAD_PARAM;
+	}
+
+	if (pClkCycles >= PDTR_TIMER_MIN)
+	{
+		mvOsPrintf("mvPciDiscardTimerSet: ERR. Invalid Clk value: %d\n", 	
+																   pClkCycles);
+		return MV_BAD_PARAM;
+
+	}
+
+	/* Read  PCI Discard Timer */
+	pciDiscardTimer  = MV_REG_READ(PCI_DISCARD_TIMER_REG(pciIf));
+
+	pciDiscardTimer &= ~PDTR_TIMER_MASK;
+
+    pciDiscardTimer |= (pClkCycles << PDTR_TIMER_OFFS);
+
+	/* Write new value */
+	MV_REG_WRITE(PCI_DISCARD_TIMER_REG(pciIf), pciDiscardTimer);
+
+	return MV_OK;
+
+}
+
+/* PCI Arbiter routines */
+
+/*******************************************************************************
+* mvPciArbEnable - PCI arbiter enable/disable
+*
+* DESCRIPTION:
+*       This fuction enable/disables a given PCI interface arbiter.
+*       NOTE: Arbiter setting can not be changed while in work. It should only 
+*             be set once.
+* INPUT:
+*       pciIf  - PCI interface number.
+*       enable - Enable/disable parameter. If enable = MV_TRUE then enable.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+MV_STATUS mvPciArbEnable(MV_U32 pciIf, MV_BOOL enable)
+{
+	MV_U32 regVal;
+
+	/* Parameter checking   */
+	if (pciIf >= mvCtrlPciMaxIfGet())
+	{
+		mvOsPrintf("mvPciArbEnable: ERR. Invalid PCI interface %d\n", pciIf);
+		return MV_ERROR;
+	}
+    	
+    /* Set PCI Arbiter Control register according to default configuration 	*/
+	regVal = MV_REG_READ(PCI_ARBITER_CTRL_REG(pciIf));
+
+	/* Make sure arbiter disabled before changing its values */
+	MV_REG_BIT_RESET(PCI_ARBITER_CTRL_REG(pciIf), PACR_ARB_ENABLE); 
+
+	regVal &= ~PCI_ARBITER_CTRL_DEFAULT_MASK;	
+
+	regVal |= PCI_ARBITER_CTRL_DEFAULT;		/* Set default configuration	*/
+
+	if (MV_TRUE == enable)
+	{
+		regVal |= PACR_ARB_ENABLE; 
+	}
+	else
+	{
+		regVal &= ~PACR_ARB_ENABLE; 
+	}
+
+	/* Write to register 										            */
+	MV_REG_WRITE(PCI_ARBITER_CTRL_REG(pciIf), regVal);
+
+	return MV_OK;	
+}
+
+
+/*******************************************************************************
+* mvPciArbParkDis - Disable arbiter parking on agent
+*
+* DESCRIPTION:
+*       This function disables the PCI arbiter from parking on the given agent
+*       list.
+*
+* INPUT:
+*       pciIf        - PCI interface number.
+*       pciAgentMask - When a bit in the mask is set to '1', parking on 
+*                      the associated PCI master is disabled. Mask bit 
+*                      refers to bit 0 - 6. For example disable parking on PCI
+*                      agent 3 set pciAgentMask 0x4 (bit 3 is set).
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+MV_STATUS mvPciArbParkDis(MV_U32 pciIf, MV_U32 pciAgentMask)
+{
+	MV_U32 pciArbiterCtrl;
+
+	/* Parameter checking   */
+	if (pciIf >= mvCtrlPciMaxIfGet())
+	{
+		mvOsPrintf("mvPciArbParkDis: ERR. Invalid PCI interface %d\n", pciIf);
+		return MV_ERROR;
+	}
+
+	/* Reading Arbiter Control register */
+	pciArbiterCtrl = MV_REG_READ(PCI_ARBITER_CTRL_REG(pciIf));
+
+	/* Arbiter must be disabled before changing parking */
+	MV_REG_BIT_RESET(PCI_ARBITER_CTRL_REG(pciIf), PACR_ARB_ENABLE); 
+
+	/* do the change */
+    pciArbiterCtrl &= ~PACR_PARK_DIS_MASK;
+	pciArbiterCtrl |= (pciAgentMask << PACR_PARK_DIS_OFFS);
+
+	/* writing new value ( if th earbiter was enabled before the change		*/ 
+	/* here it will be reenabled 											*/
+	MV_REG_WRITE(PCI_ARBITER_CTRL_REG(pciIf), pciArbiterCtrl);
+
+	return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvPciArbBrokDetectSet - Set PCI arbiter broken detection
+*
+* DESCRIPTION:
+*       This function sets the maximum number of cycles that the arbiter 
+*       waits for a PCI master to respond to its grant assertion. If a 
+*       PCI agent fails to respond within this time, the PCI arbiter aborts 
+*       the transaction and performs a new arbitration cycle.
+*       NOTE: Value must be greater than '1' for conventional PCI and 
+*       greater than '5' for PCI-X.
+*
+* INPUT:
+*       pciIf      - PCI interface number.
+*       pClkCycles - Number of PCI clock cycles. If equal to '0' the broken
+*                    master detection is disabled.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciArbBrokDetectSet(MV_U32 pciIf, MV_U32 pClkCycles)
+{
+	MV_U32 pciArbiterCtrl;
+	MV_U32 pciMode;
+
+	/* Parameter checking   */
+	if (pciIf >= mvCtrlPciMaxIfGet())
+	{
+		mvOsPrintf("mvPciArbBrokDetectSet: ERR. Invalid PCI interface %d\n", 
+																		pciIf);
+		return MV_BAD_PARAM;
+	}
+
+	/* Checking PCI mode and if pClkCycles is legal value */
+	pciMode = MV_REG_READ(PCI_MODE_REG(pciIf));
+	pciMode &= PMR_PCI_MODE_MASK;
+
+	if (PMR_PCI_MODE_CONV == pciMode)
+	{
+		if (pClkCycles < PACR_BROKEN_VAL_CONV_MIN) 
+			return MV_ERROR;
+	}
+	else
+	{
+		if (pClkCycles < PACR_BROKEN_VAL_PCIX_MIN) 
+			return MV_ERROR;
+	}
+
+	pClkCycles <<= PACR_BROKEN_VAL_OFFS;
+
+	/* Reading Arbiter Control register */
+	pciArbiterCtrl  = MV_REG_READ(PCI_ARBITER_CTRL_REG(pciIf));
+	pciArbiterCtrl &= ~PACR_BROKEN_VAL_MASK;
+	pciArbiterCtrl |= pClkCycles;
+
+	/* Arbiter must be disabled before changing broken detection */
+	MV_REG_BIT_RESET(PCI_ARBITER_CTRL_REG(pciIf), PACR_ARB_ENABLE); 
+
+	/* writing new value ( if th earbiter was enabled before the change 	*/
+	/* here it will be reenabled 											*/
+
+	MV_REG_WRITE(PCI_ARBITER_CTRL_REG(pciIf), pciArbiterCtrl);
+
+	return MV_OK;
+}
+
+/* PCI configuration space read write */
+
+/*******************************************************************************
+* mvPciConfigRead - Read from configuration space
+*
+* DESCRIPTION:
+*       This function performs a 32 bit read from PCI configuration space.
+*       It supports both type 0 and type 1 of Configuration Transactions 
+*       (local and over bridge). In order to read from local bus segment, use 
+*       bus number retrieved from mvPciLocalBusNumGet(). Other bus numbers 
+*       will result configuration transaction of type 1 (over bridge).
+*
+* INPUT:
+*       pciIf   - PCI interface number.
+*       bus     - PCI segment bus number.
+*       dev     - PCI device number.
+*       func    - Function number.
+*       regOffs - Register offset.       
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       32bit register data, 0xffffffff on error
+*
+*******************************************************************************/
+MV_U32 mvPciConfigRead (MV_U32 pciIf, MV_U32 bus, MV_U32 dev, MV_U32 func, 
+                        MV_U32 regOff)
+{
+	MV_U32 pciData = 0;
+
+	/* Parameter checking   */
+	if (PCI_DEFAULT_IF != pciIf)
+	{
+		if (pciIf >= mvCtrlPciMaxIfGet())
+		{
+			mvOsPrintf("mvPciConfigRead: ERR. Invalid PCI interface %d\n",pciIf);
+			return 0xFFFFFFFF;
+		}
+	}
+
+	if (dev >= MAX_PCI_DEVICES)
+	{
+		DB(mvOsPrintf("mvPciConfigRead: ERR. device number illigal %d\n", dev));
+		return 0xFFFFFFFF;
+	}
+	
+	if (func >= MAX_PCI_FUNCS)
+	{
+		DB(mvOsPrintf("mvPciConfigRead: ERR. function number illigal %d\n", func));
+		return 0xFFFFFFFF;
+	}
+	
+	if (bus >= MAX_PCI_BUSSES)
+	{
+		DB(mvOsPrintf("mvPciConfigRead: ERR. bus number illigal %d\n", bus));
+		return MV_ERROR;
+	}
+
+
+	/* Creating PCI address to be passed */
+	pciData |= (bus << PCAR_BUS_NUM_OFFS);
+	pciData |= (dev << PCAR_DEVICE_NUM_OFFS);
+	pciData |= (func << PCAR_FUNC_NUM_OFFS);
+	pciData |= (regOff & PCAR_REG_NUM_MASK);
+
+	pciData |= PCAR_CONFIG_EN; 
+	
+	/* Write the address to the PCI configuration address register */
+	MV_REG_WRITE(PCI_CONFIG_ADDR_REG(pciIf), pciData);
+
+	/* In order to let the PCI controller absorbed the address of the read 	*/
+	/* transaction we perform a validity check that the address was written */
+	if(pciData != MV_REG_READ(PCI_CONFIG_ADDR_REG(pciIf)))
+	{
+		return MV_ERROR;
+	}
+	/* Read the Data returned in the PCI Data register */
+	pciData = MV_REG_READ(PCI_CONFIG_DATA_REG(pciIf));
+
+	return pciData;
+}
+
+/*******************************************************************************
+* mvPciConfigWrite - Write to configuration space
+*
+* DESCRIPTION:
+*       This function performs a 32 bit write to PCI configuration space.
+*       It supports both type 0 and type 1 of Configuration Transactions 
+*       (local and over bridge). In order to write to local bus segment, use 
+*       bus number retrieved from mvPciLocalBusNumGet(). Other bus numbers 
+*       will result configuration transaction of type 1 (over bridge).
+*
+* INPUT:
+*       pciIf   - PCI interface number.
+*       bus     - PCI segment bus number.
+*       dev     - PCI device number.
+*       func    - Function number.
+*       regOffs - Register offset.       
+*       data    - 32bit data.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciConfigWrite(MV_U32 pciIf, MV_U32 bus, MV_U32 dev, 
+                           MV_U32 func, MV_U32 regOff, MV_U32 data)
+{
+	MV_U32 pciData = 0;
+
+	/* Parameter checking   */
+	if (PCI_DEFAULT_IF != pciIf)
+	{
+		if (pciIf >= mvCtrlPciMaxIfGet())
+		{
+			mvOsPrintf("mvPciConfigWrite: ERR. Invalid PCI interface %d\n", 
+																		pciIf);
+			return 0xFFFFFFFF;
+		}
+	}
+
+	if (dev >= MAX_PCI_DEVICES)
+	{
+		mvOsPrintf("mvPciConfigWrite: ERR. device number illigal %d\n",dev);
+		return MV_BAD_PARAM;
+	}
+
+	if (func >= MAX_PCI_FUNCS)
+	{
+		mvOsPrintf("mvPciConfigWrite: ERR. function number illigal %d\n", func);
+		return MV_ERROR;
+	}
+
+	if (bus >= MAX_PCI_BUSSES)
+	{
+		mvOsPrintf("mvPciConfigWrite: ERR. bus number illigal %d\n", bus);
+		return MV_ERROR;
+	}
+
+	/* Creating PCI address to be passed */
+	pciData |= (bus << PCAR_BUS_NUM_OFFS);
+	pciData |= (dev << PCAR_DEVICE_NUM_OFFS);
+	pciData |= (func << PCAR_FUNC_NUM_OFFS);
+	pciData |= (regOff & PCAR_REG_NUM_MASK);
+
+	pciData |= PCAR_CONFIG_EN;
+	
+	/* Write the address to the PCI configuration address register */
+	MV_REG_WRITE(PCI_CONFIG_ADDR_REG(pciIf), pciData);
+
+	/* In order to let the PCI controller absorbed the address of the read 	*/
+	/* transaction we perform a validity check that the address was written */
+	if(pciData != MV_REG_READ(PCI_CONFIG_ADDR_REG(pciIf)))
+	{
+		return MV_ERROR;
+	}
+
+	/* Write the Data passed to the PCI Data register */
+	MV_REG_WRITE(PCI_CONFIG_DATA_REG(pciIf), data);
+
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvPciMasterEnable - Enable/disale PCI interface master transactions.
+*
+* DESCRIPTION:
+*       This function performs read modified write to PCI command status 
+*       (offset 0x4) to set/reset bit 2. After this bit is set, the PCI 
+*       master is allowed to gain ownership on the bus, otherwise it is 
+*       incapable to do so.
+*
+* INPUT:
+*       pciIf  - PCI interface number.
+*       enable - Enable/disable parameter.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciMasterEnable(MV_U32 pciIf, MV_BOOL enable)
+{
+	MV_U32 pciCommandStatus;
+	MV_U32 RegOffs;
+	MV_U32 localBus;
+	MV_U32 localDev;
+
+	/* Parameter checking   */
+	if (pciIf >= mvCtrlPciMaxIfGet())
+	{
+		mvOsPrintf("mvPciMasterEnable: ERR. Invalid PCI interface %d\n", pciIf);
+		return MV_ERROR;
+	}
+
+	localBus = mvPciLocalBusNumGet(pciIf);
+	localDev = mvPciLocalDevNumGet(pciIf);
+	
+	RegOffs = PCI_STATUS_AND_COMMAND;
+
+	pciCommandStatus = mvPciConfigRead(pciIf, localBus, localDev, 0, RegOffs);
+
+	if (MV_TRUE == enable)
+	{
+		pciCommandStatus |= PSCR_MASTER_EN;
+	}
+	else
+	{
+		pciCommandStatus &= ~PSCR_MASTER_EN;
+	}
+
+	mvPciConfigWrite(pciIf, localBus, localDev, 0, RegOffs, pciCommandStatus);
+
+	return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvPciSlaveEnable - Enable/disale PCI interface slave transactions.
+*
+* DESCRIPTION:
+*       This function performs read modified write to PCI command status 
+*       (offset 0x4) to set/reset bit 0 and 1. After those bits are set, 
+*       the PCI slave is allowed to respond to PCI IO space access (bit 0) 
+*       and PCI memory space access (bit 1). 
+*
+* INPUT:
+*       pciIf  - PCI interface number.
+*       dev     - PCI device number.
+*       enable - Enable/disable parameter.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciSlaveEnable(MV_U32 pciIf, MV_U32 bus, MV_U32 dev, MV_BOOL enable)
+{
+	MV_U32 pciCommandStatus;
+	MV_U32 RegOffs;
+
+	/* Parameter checking   */
+	if (pciIf >= mvCtrlPciMaxIfGet())
+	{
+		mvOsPrintf("mvPciSlaveEnable: ERR. Invalid PCI interface %d\n", pciIf);
+		return MV_BAD_PARAM;
+	}
+	if (dev >= MAX_PCI_DEVICES)
+	{
+		mvOsPrintf("mvPciLocalDevNumSet: ERR. device number illigal %d\n", dev);
+		return MV_BAD_PARAM;
+
+	}
+
+	RegOffs = PCI_STATUS_AND_COMMAND;
+	
+	pciCommandStatus=mvPciConfigRead(pciIf, bus, dev, 0, RegOffs);
+
+    if (MV_TRUE == enable)
+	{
+		pciCommandStatus |= (PSCR_IO_EN | PSCR_MEM_EN);
+	}
+	else                             
+	{
+		pciCommandStatus &= ~(PSCR_IO_EN | PSCR_MEM_EN);
+	}
+
+	mvPciConfigWrite(pciIf, bus, dev, 0, RegOffs, pciCommandStatus);
+
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvPciLocalBusNumSet - Set PCI interface local bus number.
+*
+* DESCRIPTION:
+*       This function sets given PCI interface its local bus number.
+*       Note: In case the PCI interface is PCI-X, the information is read-only.
+*
+* INPUT:
+*       pciIf  - PCI interface number.
+*       busNum - Bus number.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_NOT_ALLOWED in case PCI interface is PCI-X. 
+*       MV_BAD_PARAM on bad parameters ,
+*       otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciLocalBusNumSet(MV_U32 pciIf, MV_U32 busNum)
+{
+	MV_U32 pciP2PConfig;
+	MV_PCI_MODE pciMode;
+	MV_U32 localBus;
+	MV_U32 localDev;
+
+
+	/* Parameter checking   */
+	if (pciIf >= mvCtrlPciMaxIfGet())
+	{
+		mvOsPrintf("mvPciLocalBusNumSet: ERR. Invalid PCI interface %d\n",pciIf);
+		return MV_BAD_PARAM;
+	}
+	if (busNum >= MAX_PCI_BUSSES)
+	{
+		mvOsPrintf("mvPciLocalBusNumSet: ERR. bus number illigal %d\n", busNum);
+		return MV_ERROR;
+
+	}
+
+	localBus = mvPciLocalBusNumGet(pciIf);
+	localDev = mvPciLocalDevNumGet(pciIf);
+
+
+	/* PCI interface mode */
+	mvPciModeGet(pciIf, &pciMode);
+
+	/* if PCI type is PCI-X then it is not allowed to change the dev number */
+	if (MV_PCIX == pciMode.pciType)
+	{
+		pciP2PConfig = mvPciConfigRead(pciIf, localBus, localDev, 0, PCIX_STATUS );
+
+		pciP2PConfig &= ~PXS_BN_MASK;
+
+		pciP2PConfig |= (busNum << PXS_BN_OFFS) & PXS_BN_MASK;
+
+		mvPciConfigWrite(pciIf, localBus, localDev, 0, PCIX_STATUS,pciP2PConfig );
+
+	}
+	else
+	{
+		pciP2PConfig  = MV_REG_READ(PCI_P2P_CONFIG_REG(pciIf));
+
+		pciP2PConfig &= ~PPCR_BUS_NUM_MASK;
+
+		pciP2PConfig |= (busNum << PPCR_BUS_NUM_OFFS) & PPCR_BUS_NUM_MASK;
+
+		MV_REG_WRITE(PCI_P2P_CONFIG_REG(pciIf), pciP2PConfig);
+
+	}
+
+
+	return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvPciLocalBusNumGet - Get PCI interface local bus number.
+*
+* DESCRIPTION:
+*       This function gets the local bus number of a given PCI interface.
+*
+* INPUT:
+*       pciIf  - PCI interface number.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       Local bus number.0xffffffff on Error
+*
+*******************************************************************************/
+MV_U32 mvPciLocalBusNumGet(MV_U32 pciIf)
+{
+	MV_U32 pciP2PConfig;
+
+	/* Parameter checking   */
+	if (PCI_DEFAULT_IF != pciIf)
+	{
+		if (pciIf >= mvCtrlPciMaxIfGet())
+		{
+			mvOsPrintf("mvPciLocalBusNumGet: ERR. Invalid PCI interface %d\n", 
+													   					pciIf);
+			return 0xFFFFFFFF;
+		}
+	}
+
+	pciP2PConfig  = MV_REG_READ(PCI_P2P_CONFIG_REG(pciIf));
+	pciP2PConfig &= PPCR_BUS_NUM_MASK;
+	return (pciP2PConfig >> PPCR_BUS_NUM_OFFS);
+}
+
+
+/*******************************************************************************
+* mvPciLocalDevNumSet - Set PCI interface local device number.
+*
+* DESCRIPTION:
+*       This function sets given PCI interface its local device number.
+*       Note: In case the PCI interface is PCI-X, the information is read-only.
+*
+* INPUT:
+*       pciIf  - PCI interface number.
+*       devNum - Device number.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_NOT_ALLOWED in case PCI interface is PCI-X. MV_BAD_PARAM on bad parameters ,
+*       otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPciLocalDevNumSet(MV_U32 pciIf, MV_U32 devNum)
+{
+	MV_U32 pciP2PConfig;
+	MV_PCI_MODE pciMode;
+	MV_U32 localBus;
+	MV_U32 localDev;
+
+	/* Parameter checking   */
+	if (pciIf >= mvCtrlPciMaxIfGet())
+	{
+		mvOsPrintf("mvPciLocalDevNumSet: ERR. Invalid PCI interface %d\n",pciIf);
+		return MV_BAD_PARAM;
+	}
+	if (devNum >= MAX_PCI_DEVICES)
+	{
+		mvOsPrintf("mvPciLocalDevNumSet: ERR. device number illigal %d\n", 
+																	   devNum);
+		return MV_BAD_PARAM;
+
+	}
+	
+	localBus = mvPciLocalBusNumGet(pciIf);
+	localDev = mvPciLocalDevNumGet(pciIf);
+
+	/* PCI interface mode */
+	mvPciModeGet(pciIf, &pciMode);
+
+	/* if PCI type is PCIX then it is not allowed to change the dev number */
+	if (MV_PCIX == pciMode.pciType)
+	{
+		pciP2PConfig = mvPciConfigRead(pciIf, localBus, localDev, 0, PCIX_STATUS );
+
+		pciP2PConfig &= ~PXS_DN_MASK;
+
+		pciP2PConfig |= (devNum << PXS_DN_OFFS) & PXS_DN_MASK;
+
+		mvPciConfigWrite(pciIf,localBus, localDev, 0, PCIX_STATUS,pciP2PConfig );
+	}
+	else
+	{
+		pciP2PConfig  = MV_REG_READ(PCI_P2P_CONFIG_REG(pciIf));
+
+		pciP2PConfig &= ~PPCR_DEV_NUM_MASK;
+
+		pciP2PConfig |= (devNum << PPCR_DEV_NUM_OFFS) & PPCR_DEV_NUM_MASK;
+
+		MV_REG_WRITE(PCI_P2P_CONFIG_REG(pciIf), pciP2PConfig);
+	}
+
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvPciLocalDevNumGet - Get PCI interface local device number.
+*
+* DESCRIPTION:
+*       This function gets the local device number of a given PCI interface.
+*
+* INPUT:
+*       pciIf  - PCI interface number.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       Local device number. 0xffffffff on Error
+*
+*******************************************************************************/
+MV_U32 mvPciLocalDevNumGet(MV_U32 pciIf)
+{
+	MV_U32 pciP2PConfig;
+
+	/* Parameter checking   */
+	
+	if (PCI_DEFAULT_IF != pciIf)
+	{
+		if (pciIf >= mvCtrlPciMaxIfGet())
+		{
+			mvOsPrintf("mvPciLocalDevNumGet: ERR. Invalid PCI interface %d\n", 
+																   		pciIf);
+			return 0xFFFFFFFF;
+		}
+	}
+	
+	pciP2PConfig  = MV_REG_READ(PCI_P2P_CONFIG_REG(pciIf));
+
+	pciP2PConfig &= PPCR_DEV_NUM_MASK;
+
+	return (pciP2PConfig >> PPCR_DEV_NUM_OFFS);
+}
+
+
+
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPci.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPci.h
new file mode 100644
index 0000000000..474633627e
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPci.h
@@ -0,0 +1,185 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#ifndef __INCPCIH
+#define __INCPCIH
+
+#include "mvCommon.h"
+#include "mvOs.h"
+#include "ctrlEnv/mvCtrlEnvSpec.h"
+#include "pci/mvPciRegs.h"
+
+
+/* NOTE not supported in this driver:
+
+ Built In Self Test (BIST)
+ Vital Product Data (VPD)
+ Message Signaled Interrupt (MSI)
+ Power Management
+ Compact PCI Hot Swap
+ Header retarget
+ 
+Registers not supported: 
+1) PCI DLL Status and Control (PCI0 0x1D20, PCI1 0x1DA0)
+2) PCI/MPP Pads Calibration (CI0/MPP[31:16] 0x1D1C, PCI1/MPP[15:0] 0X1D9C)
+*/  
+
+/* defines */
+/* The number of supported PCI interfaces depend on Marvell controller 		*/
+/* device number. This device number ID is located on the PCI unit 			*/
+/* configuration header. This creates a loop where calling PCI 				*/
+/* configuration read/write	routine results a call to get PCI configuration */
+/* information etc. This macro defines a default PCI interface. This PCI	*/
+/* interface is sure to exist.												*/
+#define PCI_DEFAULT_IF	0
+
+
+/* typedefs */
+/* The Marvell controller supports both conventional PCI and PCI-X.         */
+/* This enumeration describes the PCI type.                                 */
+typedef enum _mvPciType
+{
+    MV_PCI_CONV,    /* Conventional PCI */
+    MV_PCIX         /* PCI-X            */
+}MV_PCI_TYPE;
+
+typedef enum _mvPciMod
+{
+	MV_PCI_MOD_HOST,
+	MV_PCI_MOD_DEVICE
+}MV_PCI_MOD;
+
+
+/* The Marvell controller supports both PCI width of 32 and 64 bit.         */
+/* This enumerator describes PCI width                                      */
+typedef enum _mvPciWidth
+{
+    MV_PCI_32,  /* PCI width 32bit  */
+    MV_PCI_64   /* PCI width 64bit  */
+}MV_PCI_WIDTH;
+
+/* This structure describes the PCI unit configured type, speed and width.  */
+typedef struct _mvPciMode
+{
+    MV_PCI_TYPE  pciType;    /* PCI type                                    */
+    MV_U32       pciSpeed;   /* Assuming PCI base clock on board is 33MHz   */
+    MV_PCI_WIDTH pciWidth;   /* PCI bus width                               */
+}MV_PCI_MODE;
+
+/* mvPciInit - Initialize PCI interfaces*/
+MV_VOID mvPciHalInit(MV_U32 pciIf, MV_PCI_MOD pciIfmod);
+
+/* mvPciCommandSet - Set PCI comman register value.*/
+MV_STATUS mvPciCommandSet(MV_U32 pciIf, MV_U32 command);
+
+/* mvPciModeGet - Get PCI interface mode.*/
+MV_STATUS mvPciModeGet(MV_U32 pciIf, MV_PCI_MODE *pPciMode);
+
+/* mvPciRetrySet - Set PCI retry counters*/
+MV_STATUS mvPciRetrySet(MV_U32 pciIf, MV_U32 counter);
+
+/* mvPciDiscardTimerSet - Set PCI discard timer*/
+MV_STATUS mvPciDiscardTimerSet(MV_U32 pciIf, MV_U32 pClkCycles);
+
+/* mvPciArbEnable - PCI arbiter enable/disable*/
+MV_STATUS mvPciArbEnable(MV_U32 pciIf, MV_BOOL enable);
+
+/* mvPciArbParkDis - Disable arbiter parking on agent */
+MV_STATUS mvPciArbParkDis(MV_U32 pciIf, MV_U32 pciAgentMask);
+
+/* mvPciArbBrokDetectSet - Set PCI arbiter broken detection */
+MV_STATUS mvPciArbBrokDetectSet(MV_U32 pciIf, MV_U32 pClkCycles);
+
+/* mvPciConfigRead - Read from configuration space */
+MV_U32 mvPciConfigRead (MV_U32 pciIf, MV_U32 bus, MV_U32 dev,
+						MV_U32 func,MV_U32 regOff);
+
+/* mvPciConfigWrite - Write to configuration space */
+MV_STATUS mvPciConfigWrite(MV_U32 pciIf, MV_U32 bus, MV_U32 dev,
+                           MV_U32 func, MV_U32 regOff, MV_U32 data);
+
+/* mvPciMasterEnable - Enable/disale PCI interface master transactions.*/
+MV_STATUS mvPciMasterEnable(MV_U32 pciIf, MV_BOOL enable);
+
+/* mvPciSlaveEnable - Enable/disale PCI interface slave transactions.*/
+MV_STATUS mvPciSlaveEnable(MV_U32 pciIf, MV_U32 bus, MV_U32 dev,MV_BOOL enable);
+
+/* mvPciLocalBusNumSet - Set PCI interface local bus number.*/
+MV_STATUS mvPciLocalBusNumSet(MV_U32 pciIf, MV_U32 busNum);
+
+/* mvPciLocalBusNumGet - Get PCI interface local bus number.*/
+MV_U32 mvPciLocalBusNumGet(MV_U32 pciIf);
+
+/* mvPciLocalDevNumSet - Set PCI interface local device number.*/
+MV_STATUS mvPciLocalDevNumSet(MV_U32 pciIf, MV_U32 devNum);
+
+/* mvPciLocalDevNumGet - Get PCI interface local device number.*/
+MV_U32 mvPciLocalDevNumGet(MV_U32 pciIf);
+
+
+#endif /* #ifndef __INCPCIH */
+
+
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPciRegs.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPciRegs.h
new file mode 100644
index 0000000000..89d0ef12d7
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPciRegs.h
@@ -0,0 +1,411 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCPCIREGSH
+#define __INCPCIREGSH
+
+
+#include "pci-if/mvPciIfRegs.h"
+/* defines */
+#define MAX_PCI_DEVICES         32
+#define MAX_PCI_FUNCS           8
+#define MAX_PCI_BUSSES          128
+
+/* enumerators */
+
+/* This enumerator described the possible PCI slave targets.    	   */
+/* PCI slave targets are designated memory/IO address spaces that the  */
+/* PCI slave targets can access. They are also refered as "targets"    */
+/* this enumeratoe order is determined by the content of : 
+		PCI_BASE_ADDR_ENABLE_REG 				 					*/
+
+
+/* registers offsetes defines */
+
+
+
+/*************************/
+/* PCI control registers */
+/*************************/
+/* maen : should add new registers */
+#define PCI_CMD_REG(pciIf)				 		(0x30c00  + ((pciIf) * 0x80))
+#define PCI_MODE_REG(pciIf)				 		(0x30d00  + ((pciIf) * 0x80))
+#define PCI_RETRY_REG(pciIf)					(0x30c04  + ((pciIf) * 0x80))
+#define PCI_DISCARD_TIMER_REG(pciIf)			(0x30d04  + ((pciIf) * 0x80))
+#define PCI_ARBITER_CTRL_REG(pciIf)				(0x31d00 + ((pciIf) * 0x80))
+#define PCI_P2P_CONFIG_REG(pciIf)				(0x31d14 + ((pciIf) * 0x80))
+#define PCI_ACCESS_CTRL_BASEL_REG(pciIf, targetWin) \
+							(0x31e00 + ((pciIf) * 0x80) + ((targetWin) * 0x10))
+#define PCI_ACCESS_CTRL_BASEH_REG(pciIf, targetWin) \
+							(0x31e04 + ((pciIf) * 0x80) + ((targetWin) * 0x10))
+#define PCI_ACCESS_CTRL_SIZE_REG(pciIf, targetWin)	\
+							(0x31e08 + ((pciIf) * 0x80) + ((targetWin) * 0x10))
+							
+#define PCI_DLL_CTRL_REG(pciIf)	   		 		(0x31d20  + ((pciIf) * 0x80))
+
+/* PCI Dll Control (PDC)*/
+#define PDC_DLL_EN					BIT0
+
+
+/* PCI Command Register (PCR) */
+#define PCR_MASTER_BYTE_SWAP_EN     BIT0
+#define PCR_MASTER_WR_COMBINE_EN    BIT4
+#define PCR_MASTER_RD_COMBINE_EN    BIT5
+#define PCR_MASTER_WR_TRIG_WHOLE    BIT6
+#define PCR_MASTER_RD_TRIG_WHOLE    BIT7
+#define PCR_MASTER_MEM_RD_LINE_EN   BIT8
+#define PCR_MASTER_MEM_RD_MULT_EN   BIT9
+#define PCR_MASTER_WORD_SWAP_EN     BIT10
+#define PCR_SLAVE_WORD_SWAP_EN      BIT11
+#define PCR_NS_ACCORDING_RCV_TRANS  BIT14
+#define PCR_MASTER_PCIX_REQ64N_EN   BIT15
+#define PCR_SLAVE_BYTE_SWAP_EN      BIT16
+#define PCR_MASTER_DAC_EN           BIT17
+#define PCR_MASTER_M64_ALLIGN       BIT18
+#define PCR_ERRORS_PROPAGATION_EN   BIT19
+#define PCR_SLAVE_SWAP_ENABLE       BIT20
+#define PCR_MASTER_SWAP_ENABLE      BIT21
+#define PCR_MASTER_INT_SWAP_EN      BIT22
+#define PCR_LOOP_BACK_ENABLE        BIT23
+#define PCR_SLAVE_INTREG_SWAP_OFFS  24
+#define PCR_SLAVE_INTREG_SWAP_MASK  0x3
+#define PCR_SLAVE_INTREG_BYTE_SWAP  \
+                             (MV_BYTE_SWAP << PCR_SLAVE_INT_REG_SWAP_MASK)
+#define PCR_SLAVE_INTREG_NO_SWAP    \
+                             (MV_NO_SWAP   << PCR_SLAVE_INT_REG_SWAP_MASK)
+#define PCR_SLAVE_INTREG_BYTE_WORD  \
+                             (MV_BYTE_WORD_SWAP << PCR_SLAVE_INT_REG_SWAP_MASK)
+#define PCR_SLAVE_INTREG_WORD_SWAP  \
+                             (MV_WORD_SWAP << PCR_SLAVE_INT_REG_SWAP_MASK)
+#define PCR_RESET_REASSERTION_EN    BIT26
+#define PCR_PCI_TO_CPU_REG_ORDER_EN BIT28
+#define PCR_CPU_TO_PCI_ORDER_EN     BIT29
+#define PCR_PCI_TO_CPU_ORDER_EN     BIT30
+
+/* PCI Mode Register (PMR) */
+#define PMR_PCI_ID_OFFS 			0  /* PCI Interface ID */
+#define PMR_PCI_ID_MASK 			(0x1 << PMR_PCI_ID_OFFS)
+#define PMR_PCI_ID_PCI(pciNum) 		((pciNum) << PCI_MODE_PCIID_OFFS)
+
+#define PMR_PCI_64_OFFS				2 	/* 64-bit PCI Interface */
+#define PMR_PCI_64_MASK				(0x1 << PMR_PCI_64_OFFS)
+#define PMR_PCI_64_64BIT			(0x1 << PMR_PCI_64_OFFS)
+#define PMR_PCI_64_32BIT			(0x0 << PMR_PCI_64_OFFS)
+
+#define PMR_PCI_MODE_OFFS			4 	/* PCI interface mode of operation */
+#define PMR_PCI_MODE_MASK			(0x3 << PMR_PCI_MODE_OFFS)
+#define PMR_PCI_MODE_CONV			(0x0 << PMR_PCI_MODE_OFFS)
+#define PMR_PCI_MODE_PCIX_66MHZ		(0x1 << PMR_PCI_MODE_OFFS)
+#define PMR_PCI_MODE_PCIX_100MHZ	(0x2 << PMR_PCI_MODE_OFFS)
+#define PMR_PCI_MODE_PCIX_133MHZ	(0x3 << PMR_PCI_MODE_OFFS)
+
+#define PMR_EXP_ROM_SUPPORT			BIT8	/* Expansion ROM Active */
+
+#define PMR_PCI_RESET_OFFS			31 /* PCI Interface Reset Indication */
+#define PMR_PCI_RESET_MASK			(0x1 << PMR_PCI_RESET_OFFS)
+#define PMR_PCI_RESET_PCIXRST		(0x0 << PMR_PCI_RESET_OFFS)
+
+
+/* PCI Retry Register (PRR) */
+#define PRR_RETRY_CNTR_OFFS			16 /* Retry Counter */
+#define PRR_RETRY_CNTR_MAX			0xff
+#define PRR_RETRY_CNTR_MASK			(PRR_RETRY_CNTR_MAX << PRR_RETRY_CNTR_OFFS)
+
+
+/* PCI Discard Timer Register (PDTR) */
+#define PDTR_TIMER_OFFS				0	/* Timer */
+#define PDTR_TIMER_MAX				0xffff
+#define PDTR_TIMER_MIN				0x7F
+#define PDTR_TIMER_MASK				(PDTR_TIMER_MAX << PDTR_TIMER_OFFS)
+
+
+/* PCI Arbiter Control Register (PACR) */
+#define PACR_BROKEN_DETECT_EN		BIT1	/* Broken Detection Enable */
+
+#define PACR_BROKEN_VAL_OFFS		3	/* Broken Value */
+#define PACR_BROKEN_VAL_MASK		(0xf << PACR_BROKEN_VAL_OFFS)
+#define PACR_BROKEN_VAL_CONV_MIN	0x2
+#define PACR_BROKEN_VAL_PCIX_MIN	0x6
+
+#define PACR_PARK_DIS_OFFS		14	/* Parking Disable */
+#define PACR_PARK_DIS_MAX_AGENT	0x3f
+#define PACR_PARK_DIS_MASK		(PACR_PARK_DIS_MAX_AGENT<<PACR_PARK_DIS_OFFS)
+#define PACR_PARK_DIS(agent)	((1 << (agent)) << PACR_PARK_DIS_OFFS)
+
+#define PACR_ARB_ENABLE				BIT31	/* Enable Internal Arbiter */
+
+
+/* PCI P2P Configuration Register (PPCR) */
+#define PPCR_2ND_BUS_L_OFFS			0	/* 2nd PCI Interface Bus Range Lower */
+#define PPCR_2ND_BUS_L_MASK			(0xff << PPCR_2ND_BUS_L_OFFS)
+
+#define PPCR_2ND_BUS_H_OFFS			8	/* 2nd PCI Interface Bus Range Upper */
+#define PPCR_2ND_BUS_H_MASK			(0xff << PPCR_2ND_BUS_H_OFFS)
+
+#define PPCR_BUS_NUM_OFFS			16  /* The PCI interface's Bus number */
+#define PPCR_BUS_NUM_MASK			(0xff << PPCR_BUS_NUM_OFFS)
+
+#define PPCR_DEV_NUM_OFFS			24  /* The PCI interface’s Device number */
+#define PPCR_DEV_NUM_MASK			(0xff << PPCR_DEV_NUM_OFFS)
+
+
+/* PCI Access Control Base Low Register (PACBLR) */
+#define PACBLR_EN					BIT0 /* Access control window enable */
+
+#define PACBLR_ACCPROT				BIT4 /* Access Protect */
+#define PACBLR_WRPROT				BIT5 /* Write Protect */
+
+#define PACBLR_PCISWAP_OFFS			6 	 /* PCI slave Data Swap Control */
+#define PACBLR_PCISWAP_MASK			(0x3 << PACBLR_PCISWAP_OFFS)
+#define PACBLR_PCISWAP_BYTE			(0x0 << PACBLR_PCISWAP_OFFS)
+#define PACBLR_PCISWAP_NO_SWAP		(0x1 << PACBLR_PCISWAP_OFFS)
+#define PACBLR_PCISWAP_BYTE_WORD	(0x2 << PACBLR_PCISWAP_OFFS)
+#define PACBLR_PCISWAP_WORD			(0x3 << PACBLR_PCISWAP_OFFS)
+
+#define PACBLR_RDMBURST_OFFS		8 /* Read Max Burst */
+#define PACBLR_RDMBURST_MASK		(0x3 << PACBLR_RDMBURST_OFFS)
+#define PACBLR_RDMBURST_32BYTE		(0x0 << PACBLR_RDMBURST_OFFS)
+#define PACBLR_RDMBURST_64BYTE		(0x1 << PACBLR_RDMBURST_OFFS)
+#define PACBLR_RDMBURST_128BYTE		(0x2 << PACBLR_RDMBURST_OFFS)
+
+#define PACBLR_RDSIZE_OFFS			10 /* Typical PCI read transaction Size. */
+#define PACBLR_RDSIZE_MASK			(0x3 << PACBLR_RDSIZE_OFFS)
+#define PACBLR_RDSIZE_32BYTE		(0x0 << PACBLR_RDSIZE_OFFS)
+#define PACBLR_RDSIZE_64BYTE		(0x1 << PACBLR_RDSIZE_OFFS)
+#define PACBLR_RDSIZE_128BYTE		(0x2 << PACBLR_RDSIZE_OFFS)
+#define PACBLR_RDSIZE_256BYTE		(0x3 << PACBLR_RDSIZE_OFFS)
+
+#define PACBLR_BASE_L_OFFS			12	/* Corresponds to address bits [31:12] */
+#define PACBLR_BASE_L_MASK			(0xfffff << PACBLR_BASE_L_OFFS)
+#define PACBLR_BASE_L_ALIGNMENT		(1 << PACBLR_BASE_L_OFFS)
+#define PACBLR_BASE_ALIGN_UP(base)  \
+                             ((base+PACBLR_BASE_L_ALIGNMENT)&PACBLR_BASE_L_MASK)
+#define PACBLR_BASE_ALIGN_DOWN(base)  (base & PACBLR_BASE_L_MASK)
+
+
+/* PCI Access Control Base High Register (PACBHR) 	*/
+#define PACBHR_BASE_H_OFFS			0	/* Corresponds to address bits [63:32] */
+#define PACBHR_CTRL_BASE_H_MASK		(0xffffffff << PACBHR_BASE_H_OFFS)
+
+/* PCI Access Control Size Register (PACSR) 		*/
+#define PACSR_WRMBURST_OFFS			8 /* Write Max Burst */
+#define PACSR_WRMBURST_MASK			(0x3 << PACSR_WRMBURST_OFFS)
+#define PACSR_WRMBURST_32BYTE		(0x0 << PACSR_WRMBURST_OFFS)
+#define PACSR_WRMBURST_64BYTE		(0x1 << PACSR_WRMBURST_OFFS)
+#define PACSR_WRMBURST_128BYTE		(0x2 << PACSR_WRMBURST_OFFS)
+
+#define PACSR_PCI_ORDERING			BIT11 /* PCI Ordering required */
+
+#define PACSR_SIZE_OFFS				12	/* PCI access window size */
+#define PACSR_SIZE_MASK				(0xfffff << PACSR_SIZE_OFFS)
+#define PACSR_SIZE_ALIGNMENT		(1 << PACSR_SIZE_OFFS)
+#define PACSR_SIZE_ALIGN_UP(size)   \
+                                   ((size+PACSR_SIZE_ALIGNMENT)&PACSR_SIZE_MASK)
+#define PACSR_SIZE_ALIGN_DOWN(size) (size & PACSR_SIZE_MASK)
+
+
+/***************************************/
+/* PCI Configuration Access Registers  */
+/***************************************/
+
+#define PCI_CONFIG_ADDR_REG(pciIf)	(0x30C78 - ((pciIf) * 0x80) )
+#define PCI_CONFIG_DATA_REG(pciIf)	(0x30C7C - ((pciIf) * 0x80) )
+#define PCI_INT_ACK_REG(pciIf)		(0x30C34 + ((pciIf) * 0x80) )
+
+/* PCI Configuration Address Register (PCAR) */
+#define PCAR_REG_NUM_OFFS			2
+#define PCAR_REG_NUM_MASK			(0x3F << PCAR_REG_NUM_OFFS)
+		
+#define PCAR_FUNC_NUM_OFFS			8
+#define PCAR_FUNC_NUM_MASK			(0x7 << PCAR_FUNC_NUM_OFFS)
+		
+#define PCAR_DEVICE_NUM_OFFS		11
+#define PCAR_DEVICE_NUM_MASK		(0x1F << PCAR_DEVICE_NUM_OFFS)
+		
+#define PCAR_BUS_NUM_OFFS			16
+#define PCAR_BUS_NUM_MASK			(0xFF << PCAR_BUS_NUM_OFFS)
+		
+#define PCAR_CONFIG_EN				BIT31
+
+
+/***************************************/
+/* PCI Configuration registers */
+/***************************************/
+
+/*********************************************/
+/* PCI Configuration, Function 0, Registers  */
+/*********************************************/
+
+/* Marvell Specific */
+#define PCI_SCS0_BASE_ADDR_LOW			   			0x010
+#define PCI_SCS0_BASE_ADDR_HIGH			   			0x014
+#define PCI_SCS1_BASE_ADDR_LOW		  				0x018
+#define PCI_SCS1_BASE_ADDR_HIGH			  			0x01C
+#define PCI_INTER_REG_MEM_MAPPED_BASE_ADDR_L 		0x020
+#define PCI_INTER_REG_MEM_MAPPED_BASE_ADDR_H		0x024
+
+/* capability list */
+#define PCI_POWER_MNG_CAPABILITY		            0x040
+#define PCI_POWER_MNG_STATUS_CONTROL		        0x044
+#define PCI_VPD_ADDRESS_REG	                        0x048
+#define PCI_VPD_DATA_REG	                        0x04c
+#define PCI_MSI_MESSAGE_CONTROL						0x050
+#define PCI_MSI_MESSAGE_ADDR		                0x054
+#define PCI_MSI_MESSAGE_UPPER_ADDR		            0x058
+#define PCI_MSI_MESSAGE_DATA		                0x05c
+#define PCIX_COMMAND		                        0x060
+#define PCIX_STATUS		                            0x064
+#define PCI_COMPACT_PCI_HOT_SWAP		            0x068
+
+
+/*********************************************/
+/* PCI Configuration, Function 1, Registers  */
+/*********************************************/
+
+#define PCI_SCS2_BASE_ADDR_LOW						0x10
+#define PCI_SCS2_BASE_ADDR_HIGH						0x14
+#define PCI_SCS3_BASE_ADDR_LOW		 				0x18
+#define PCI_SCS3_BASE_ADDR_HIGH						0x1c
+
+
+/***********************************************/
+/*  PCI Configuration, Function 2, Registers   */
+/***********************************************/
+
+#define PCI_DEVCS0_BASE_ADDR_LOW					0x10
+#define PCI_DEVCS0_BASE_ADDR_HIGH		 			0x14
+#define PCI_DEVCS1_BASE_ADDR_LOW		 			0x18
+#define PCI_DEVCS1_BASE_ADDR_HIGH		      		0x1c
+#define PCI_DEVCS2_BASE_ADDR_LOW		 			0x20
+#define PCI_DEVCS2_BASE_ADDR_HIGH		      		0x24
+
+/***********************************************/
+/*  PCI Configuration, Function 3, Registers   */
+/***********************************************/
+
+#define PCI_BOOTCS_BASE_ADDR_LOW					0x18
+#define PCI_BOOTCS_BASE_ADDR_HIGH		      		0x1c
+
+/***********************************************/
+/*  PCI Configuration, Function 4, Registers   */
+/***********************************************/
+
+#define PCI_P2P_MEM0_BASE_ADDR_LOW				   	0x10
+#define PCI_P2P_MEM0_BASE_ADDR_HIGH		 			0x14
+#define PCI_P2P_IO_BASE_ADDR		               	0x20
+#define PCI_INTER_REGS_IO_MAPPED_BASE_ADDR		   0x24
+
+/* PCIX_STATUS  register fields (PXS) */
+
+#define PXS_FN_OFFS		0	/* Description Number */
+#define PXS_FN_MASK		(0x7 << PXS_FN_OFFS)
+
+#define PXS_DN_OFFS		3	/* Device Number */
+#define PXS_DN_MASK		(0x1f << PXS_DN_OFFS)
+
+#define PXS_BN_OFFS		8	/* Bus Number */
+#define PXS_BN_MASK		(0xff << PXS_BN_OFFS)
+
+
+/* PCI Error Report Register Map */
+#define PCI_SERRN_MASK_REG(pciIf)		(0x30c28  + (pciIf * 0x80))
+#define PCI_CAUSE_REG(pciIf)			(0x31d58 + (pciIf * 0x80))
+#define PCI_MASK_REG(pciIf)				(0x31d5C + (pciIf * 0x80))
+#define PCI_ERROR_ADDR_LOW_REG(pciIf)	(0x31d40 + (pciIf * 0x80))
+#define PCI_ERROR_ADDR_HIGH_REG(pciIf)	(0x31d44 + (pciIf * 0x80))
+#define PCI_ERROR_ATTRIBUTE_REG(pciIf)	(0x31d48 + (pciIf * 0x80))
+#define PCI_ERROR_COMMAND_REG(pciIf)	(0x31d50 + (pciIf * 0x80))
+
+/* PCI Interrupt Cause Register (PICR) */
+#define PICR_ERR_SEL_OFFS           27
+#define PICR_ERR_SEL_MASK           (0x1f << PICR_ERR_SEL_OFFS)
+
+/* PCI Error Command Register (PECR) */
+#define PECR_ERR_CMD_OFFS			0
+#define PECR_ERR_CMD_MASK			(0xf << PECR_ERR_CMD_OFFS)
+#define PECR_DAC					BIT4
+
+
+/* defaults */
+/* Set bits means value is about to change according to new value */
+#define PCI_COMMAND_DEFAULT_MASK                0xffffdff1
+#define PCI_COMMAND_DEFAULT                             \
+                (PCR_MASTER_WR_TRIG_WHOLE   |   \
+         PCR_MASTER_RD_TRIG_WHOLE       |       \
+                 PCR_MASTER_MEM_RD_LINE_EN      |       \
+         PCR_MASTER_MEM_RD_MULT_EN  |   \
+                 PCR_NS_ACCORDING_RCV_TRANS     |       \
+                 PCR_MASTER_PCIX_REQ64N_EN      |       \
+                 PCR_MASTER_DAC_EN                      |       \
+                 PCR_MASTER_M64_ALLIGN          |       \
+                 PCR_ERRORS_PROPAGATION_EN)
+                 
+                 
+#define PCI_ARBITER_CTRL_DEFAULT_MASK   0x801fc07a
+#define PCI_ARBITER_CTRL_DEFAULT        \
+        (PACR_BROKEN_VAL_PCIX_MIN << PACR_BROKEN_VAL_OFFS)
+
+
+#endif /* #ifndef __INCPCIREGSH */
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvPex.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvPex.c
new file mode 100644
index 0000000000..068aac2bf8
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvPex.c
@@ -0,0 +1,1143 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "pex/mvPex.h"
+
+#include "ctrlEnv/mvCtrlEnvLib.h"
+
+/* defines  */       
+#ifdef MV_DEBUG         
+#define DB(x)	x
+#else                
+#define DB(x)    
+#endif	             
+
+MV_STATUS mvPexHalInit(MV_U32 pexIf, MV_PEX_TYPE pexType)
+{
+	MV_PEX_MODE pexMode;
+	MV_U32 regVal;
+	MV_U32	status;
+ 
+    /* First implement Guideline (GL# PCI Express-2) Wrong Default Value    */
+    /* to Transmitter Output Current (TXAMP) Relevant for: 88F5181-A1/B0/B1 */
+    /* and 88F5281-B0 and above, 88F5182, 88F5082, 88F5181L, 88F6082/L      */
+ 
+    if ((mvCtrlModelGet() != MV_1281_DEV_ID) &&
+	(mvCtrlModelGet() != MV_6281_DEV_ID) &&
+	(mvCtrlModelGet() != MV_6192_DEV_ID) &&
+    (mvCtrlModelGet() != MV_6190_DEV_ID) &&
+	(mvCtrlModelGet() != MV_6180_DEV_ID) &&
+        	(mvCtrlModelGet() != MV_6183_DEV_ID) &&
+	(mvCtrlModelGet() != MV_6183L_DEV_ID) &&
+        	(mvCtrlModelGet() != MV_78100_DEV_ID) &&
+        	(mvCtrlModelGet() != MV_78200_DEV_ID) &&
+	(mvCtrlModelGet() != MV_76100_DEV_ID) &&
+	(mvCtrlModelGet() != MV_78XX0_DEV_ID))
+    {
+
+        /* Read current value of TXAMP */
+        MV_REG_WRITE(0x41b00, 0x80820000);   /* Write the read command   */
+
+        regVal = MV_REG_READ(0x41b00);      /* Extract the data         */
+
+        /* Prepare new data for write */
+        regVal &= ~0x7;                     /* Clear bits [2:0]         */
+        regVal |=  0x4;                     /* Set the new value        */
+        regVal &= ~0x80000000;              /* Set "write" command      */
+        MV_REG_WRITE(0x41b00, regVal);      /* Write the write command  */
+
+    }
+    else
+    {
+        /* Implement 1.0V termination GL for 88F1281 device only */
+        /* BIT0 - Common mode feedback */
+        /* BIT3 - TxBuf, extra drive for 1.0V termination */
+        if (mvCtrlModelGet() == MV_1281_DEV_ID)
+        {
+                MV_REG_WRITE(0x41b00, 0x80860000);   /* Write the read command   */
+                regVal = MV_REG_READ(0x41b00);      /* Extract the data         */
+                regVal |= (BIT0 | BIT3);
+                regVal &= ~0x80000000;              /* Set "write" command      */
+                MV_REG_WRITE(0x41b00, regVal);      /* Write the write command  */
+
+                MV_REG_WRITE(0x31b00, 0x80860000);   /* Write the read command   */
+                regVal = MV_REG_READ(0x31b00);      /* Extract the data         */
+                regVal |= (BIT0 | BIT3);
+                regVal &= ~0x80000000;              /* Set "write" command      */
+                MV_REG_WRITE(0x31b00, regVal);      /* Write the write command  */
+        }
+    }
+
+        if( mvPexModeGet(pexIf, &pexMode) != MV_OK)
+        {
+                mvOsPrintf("PEX init ERR. mvPexModeGet failed (pexType=%d)\n",pexMode.pexType);
+                return MV_ERROR;
+        }
+
+        /* Check that required PEX type is the one set in reset time */
+        if (pexType != pexMode.pexType)
+        {
+                /* No Link. Shut down the Phy */
+		mvPexPowerDown(pexIf);
+                mvOsPrintf("PEX init ERR. PEX type sampled mismatch (%d,%d)\n",pexType,pexMode.pexType);
+                return MV_ERROR;
+        }
+
+        if (MV_PEX_ROOT_COMPLEX == pexType)
+        {
+                mvPexLocalBusNumSet(pexIf, PEX_HOST_BUS_NUM(pexIf));
+                mvPexLocalDevNumSet(pexIf, PEX_HOST_DEV_NUM(pexIf));
+        
+                /* Local device master Enable */
+                mvPexMasterEnable(pexIf, MV_TRUE);
+        
+                /* Local device slave Enable */
+                mvPexSlaveEnable(pexIf, mvPexLocalBusNumGet(pexIf),
+                                                 mvPexLocalDevNumGet(pexIf), MV_TRUE);
+		/* Interrupt disable */
+		status = MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf, PEX_STATUS_AND_COMMAND));
+		status |= PXSAC_INT_DIS;
+		MV_REG_WRITE(PEX_CFG_DIRECT_ACCESS(pexIf, PEX_STATUS_AND_COMMAND), status);
+        }
+
+        /* now wait 500 ms to be sure the link is valid (spec compliant) */ 
+        mvOsDelay(500);
+	/* Check if we have link */
+	if (MV_REG_READ(PEX_STATUS_REG(pexIf)) & PXSR_DL_DOWN)
+	{
+		mvOsPrintf("PEX%d interface detected no Link.\n",pexIf);
+		return MV_NO_SUCH;
+	}
+
+	if (MV_PEX_WITDH_X1 ==  pexMode.pexWidth)
+	{
+		mvOsPrintf("PEX%d interface detected Link X1\n",pexIf);
+	}
+	else
+	{
+		mvOsPrintf("PEX%d interface detected Link X4\n",pexIf);
+	}
+
+#ifdef PCIE_VIRTUAL_BRIDGE_SUPPORT
+	mvPexVrtBrgInit(pexIf);
+#endif
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvPexModeGet - Get Pex Mode
+*
+* DESCRIPTION:
+*
+* INPUT:
+*       pexIf   - PEX interface number.
+*
+* OUTPUT:
+*       pexMode - Pex mode structure
+*
+* RETURN:
+*       MV_OK on success , MV_ERROR otherwise
+*
+*******************************************************************************/
+MV_U32 mvPexModeGet(MV_U32 pexIf,MV_PEX_MODE *pexMode)
+{
+	MV_U32 pexData;
+
+	/* Parameter checking   */
+	if (PEX_DEFAULT_IF != pexIf)
+	{
+		if (pexIf >= mvCtrlPexMaxIfGet())
+		{
+			mvOsPrintf("mvPexModeGet: ERR. Invalid PEX interface %d\n",pexIf);
+			return MV_ERROR;
+		}
+	}
+
+	pexData = MV_REG_READ(PEX_CTRL_REG(pexIf));
+
+	switch (pexData & PXCR_DEV_TYPE_CTRL_MASK)
+	{
+	case PXCR_DEV_TYPE_CTRL_CMPLX:
+		pexMode->pexType = MV_PEX_ROOT_COMPLEX;
+		break;
+	case PXCR_DEV_TYPE_CTRL_POINT:
+		pexMode->pexType = MV_PEX_END_POINT;
+		break;
+
+	}
+
+    /* Check if we have link */
+    if (MV_REG_READ(PEX_STATUS_REG(pexIf)) & PXSR_DL_DOWN)
+    {
+        pexMode->pexLinkUp = MV_FALSE;
+        
+        /* If there is no link, the auto negotiation data is worthless */
+        pexMode->pexWidth  = MV_PEX_WITDH_INVALID;
+    }   
+    else
+    {
+        pexMode->pexLinkUp = MV_TRUE;
+
+        /* We have link. The link width is now valid */
+        pexData = MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf, PEX_LINK_CTRL_STAT_REG));
+        pexMode->pexWidth = ((pexData & PXLCSR_NEG_LNK_WDTH_MASK) >> 
+                             PXLCSR_NEG_LNK_WDTH_OFFS);
+    }
+
+    return MV_OK;
+}
+
+
+/* PEX configuration space read write */
+
+/*******************************************************************************
+* mvPexConfigRead - Read from configuration space
+*
+* DESCRIPTION:
+*       This function performs a 32 bit read from PEX configuration space.
+*       It supports both type 0 and type 1 of Configuration Transactions 
+*       (local and over bridge). In order to read from local bus segment, use 
+*       bus number retrieved from mvPexLocalBusNumGet(). Other bus numbers 
+*       will result configuration transaction of type 1 (over bridge).
+*
+* INPUT:
+*       pexIf   - PEX interface number.
+*       bus     - PEX segment bus number.
+*       dev     - PEX device number.
+*       func    - Function number.
+*       regOffs - Register offset.       
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       32bit register data, 0xffffffff on error
+*
+*******************************************************************************/
+MV_U32 mvPexConfigRead (MV_U32 pexIf, MV_U32 bus, MV_U32 dev, MV_U32 func, 
+                        MV_U32 regOff)
+{
+#if defined(PCIE_VIRTUAL_BRIDGE_SUPPORT)
+        return mvPexVrtBrgConfigRead (pexIf, bus, dev, func, regOff);
+}
+
+MV_U32 mvPexHwConfigRead (MV_U32 pexIf, MV_U32 bus, MV_U32 dev, MV_U32 func,
+                        MV_U32 regOff)
+{
+#endif
+	MV_U32 pexData = 0;
+	MV_U32	localDev,localBus;
+
+	/* Parameter checking   */
+	if (PEX_DEFAULT_IF != pexIf)
+	{
+		if (pexIf >= mvCtrlPexMaxIfGet())
+		{
+			mvOsPrintf("mvPexConfigRead: ERR. Invalid PEX interface %d\n",pexIf);
+			return 0xFFFFFFFF;
+		}
+	}
+
+	if (dev >= MAX_PEX_DEVICES)
+	{
+		DB(mvOsPrintf("mvPexConfigRead: ERR. device number illigal %d\n", dev));
+		return 0xFFFFFFFF;
+	}
+	
+	if (func >= MAX_PEX_FUNCS)
+	{
+		DB(mvOsPrintf("mvPexConfigRead: ERR. function num illigal %d\n", func));
+		return 0xFFFFFFFF;
+	}
+	
+	if (bus >= MAX_PEX_BUSSES)
+	{
+		DB(mvOsPrintf("mvPexConfigRead: ERR. bus number illigal %d\n", bus));
+		return MV_ERROR;
+	}
+    	     
+    DB(mvOsPrintf("mvPexConfigRead: pexIf %d, bus %d, dev %d, func %d, regOff 0x%x\n",
+                   pexIf, bus, dev, func, regOff));
+	
+	localDev = mvPexLocalDevNumGet(pexIf);
+	localBus = mvPexLocalBusNumGet(pexIf);
+                                     
+    /* Speed up the process. In case on no link, return MV_ERROR */
+    if ((dev != localDev) || (bus != localBus))
+    {
+        pexData = MV_REG_READ(PEX_STATUS_REG(pexIf));
+
+        if ((pexData & PXSR_DL_DOWN))
+        {
+            return MV_ERROR;
+        }
+    }
+
+    /* in PCI Express we have only one device number */
+	/* and this number is the first number we encounter 
+	else that the localDev*/
+	/* spec pex define return on config read/write on any device */
+	if (bus == localBus)
+	{
+		if (localDev == 0)
+		{
+			/* if local dev is 0 then the first number we encounter 
+			after 0 is 1 */
+			if ((dev != 1)&&(dev != localDev))
+			{
+				return MV_ERROR;
+			}	
+		}
+		else
+		{
+			/* if local dev is not 0 then the first number we encounter 
+			is 0 */
+	
+			if ((dev != 0)&&(dev != localDev))
+			{
+				return MV_ERROR;
+			}
+		}
+		if(func != 0 ) /* i.e bridge */
+		{
+			return MV_ERROR;
+		}
+	}
+    
+    
+	/* Creating PEX address to be passed */
+	pexData = (bus << PXCAR_BUS_NUM_OFFS);
+	pexData |= (dev << PXCAR_DEVICE_NUM_OFFS);
+	pexData |= (func << PXCAR_FUNC_NUM_OFFS);
+	pexData |= (regOff & PXCAR_REG_NUM_MASK); /* lgacy register space */
+	/* extended register space */
+	pexData |=(((regOff & PXCAR_REAL_EXT_REG_NUM_MASK) >> 
+				PXCAR_REAL_EXT_REG_NUM_OFFS) << PXCAR_EXT_REG_NUM_OFFS);
+
+	pexData |= PXCAR_CONFIG_EN; 
+	
+	/* Write the address to the PEX configuration address register */
+	MV_REG_WRITE(PEX_CFG_ADDR_REG(pexIf), pexData);
+
+	DB(mvOsPrintf("mvPexConfigRead:address pexData=%x ",pexData));
+    
+	
+	/* In order to let the PEX controller absorbed the address of the read 	*/
+	/* transaction we perform a validity check that the address was written */
+	if(pexData != MV_REG_READ(PEX_CFG_ADDR_REG(pexIf)))
+	{
+		return MV_ERROR;
+	}
+
+	/* cleaning Master Abort */
+	MV_REG_BIT_SET(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_STATUS_AND_COMMAND), 
+				   PXSAC_MABORT);
+#if 0
+	/* Guideline (GL# PCI Express-1) Erroneous Read Data on Configuration   */
+	/* This guideline is relevant for all devices except of the following devices:
+	   88F5281-BO and above, 88F5181L-A0 and above, 88F1281 A0 and above
+	   88F6183 A0 and above, 88F6183L  */
+	if ( ( (dev != localDev) || (bus != localBus) ) && 
+		(
+		!(MV_5281_DEV_ID == mvCtrlModelGet())&&
+		!((MV_5181_DEV_ID == mvCtrlModelGet())&& (mvCtrlRevGet() >= MV_5181L_A0_REV))&&
+		!(MV_1281_DEV_ID == mvCtrlModelGet())&&
+		!(MV_6183_DEV_ID == mvCtrlModelGet())&&
+		!(MV_6183L_DEV_ID == mvCtrlModelGet())&&
+		!(MV_6281_DEV_ID == mvCtrlModelGet())&&
+		!(MV_6192_DEV_ID == mvCtrlModelGet())&&
+		!(MV_6190_DEV_ID == mvCtrlModelGet())&&
+        !(MV_6180_DEV_ID == mvCtrlModelGet())&& 
+		!(MV_78XX0_DEV_ID == mvCtrlModelGet()) 
+		))
+	{
+
+		/* PCI-Express configuration read work-around */
+
+		/* we will use one of the Punit (AHBToMbus) windows to access the xbar 
+		and read the data from there */
+		/*
+		Need to configure the 2 free Punit (AHB to MBus bridge) 
+		address decoding windows:
+		Configure the flash Window to handle Configuration space requests 
+		for PEX0/1:
+		1.    write 0x7931/0x7941 to the flash window and the size, 
+		      79-xbar attr (pci cfg), 3/4-xbar target (pex0/1), 1-WinEn
+		2.    write base to flash window 
+		
+		Configuration transactions from the CPU should write/read the data 
+		to/from address of the form:
+		addr[31:28] = 0x5 (for PEX0) or 0x6 (for PEX1)
+		addr[27:24] = extended register number
+		addr[23:16] = bus number
+		addr[15:11] = device number
+		addr[10:8]   = function number
+		addr[7:0]     = register number
+		*/
+
+		#include "ctrlEnv/sys/mvAhbToMbus.h"
+		{
+			MV_U32 winNum;
+			MV_AHB_TO_MBUS_DEC_WIN originWin;
+			MV_U32 pciAddr=0;
+			MV_U32 remapLow=0,remapHigh=0;
+
+			/* 
+			We will use DEV_CS2\Flash window for this workarround 
+			*/
+            
+			winNum = mvAhbToMbusWinTargetGet(PEX_CONFIG_RW_WA_TARGET);
+
+			/* save remap values if exist */
+			if ((1 == winNum)||(0 == winNum))
+			{
+				remapLow = MV_REG_READ(AHB_TO_MBUS_WIN_REMAP_LOW_REG(winNum));
+				remapHigh = MV_REG_READ(AHB_TO_MBUS_WIN_REMAP_HIGH_REG(winNum));
+
+			}
+			
+
+			/* save the original window values */
+			mvAhbToMbusWinGet(winNum,&originWin);
+
+			if (PEX_CONFIG_RW_WA_USE_ORIGINAL_WIN_VALUES)
+			{
+				/* set the window as xbar window */
+				if (pexIf)
+				{
+					MV_REG_WRITE(AHB_TO_MBUS_WIN_CTRL_REG(winNum), 
+					(0x7931 | (((originWin.addrWin.size >> 16)-1) ) << 16));
+				}
+				else
+				{
+					MV_REG_WRITE(AHB_TO_MBUS_WIN_CTRL_REG(winNum), 
+					(0x7941 | (((originWin.addrWin.size >> 16)-1) ) << 16));
+				}
+
+				MV_REG_WRITE(AHB_TO_MBUS_WIN_BASE_REG(winNum),
+							 originWin.addrWin.baseLow);
+
+				/*pciAddr = originWin.addrWin.baseLow;*/
+				pciAddr = (MV_U32)CPU_MEMIO_UNCACHED_ADDR(
+					(MV_U32)originWin.addrWin.baseLow);
+			
+			}
+			else
+			{
+				/* set the window as xbar window */
+				if (pexIf)
+				{
+					MV_REG_WRITE(AHB_TO_MBUS_WIN_CTRL_REG(winNum), 
+					(0x7931 | (((PEX_CONFIG_RW_WA_SIZE >> 16)-1) ) << 16));
+				}
+				else
+				{
+					MV_REG_WRITE(AHB_TO_MBUS_WIN_CTRL_REG(winNum), 
+					(0x7941 | (((PEX_CONFIG_RW_WA_SIZE >> 16)-1) ) << 16));
+				}
+
+				MV_REG_WRITE(AHB_TO_MBUS_WIN_BASE_REG(winNum),
+							 PEX_CONFIG_RW_WA_BASE);
+
+				pciAddr = (MV_U32)CPU_MEMIO_UNCACHED_ADDR(PEX_CONFIG_RW_WA_BASE);
+			}
+			
+			
+			/* remap should be as base */
+			if ((1 == winNum)||(0 == winNum))
+			{
+			   MV_REG_WRITE(AHB_TO_MBUS_WIN_REMAP_LOW_REG(winNum),pciAddr);
+			   MV_REG_WRITE(AHB_TO_MBUS_WIN_REMAP_HIGH_REG(winNum),0);
+
+			}
+
+			/* extended register space */
+			pciAddr |= (bus << 16);
+			pciAddr |= (dev << 11);
+			pciAddr |= (func << 8);
+			pciAddr |= (regOff & PXCAR_REG_NUM_MASK); /* lgacy register space */
+
+			pexData = *(MV_U32*)pciAddr; 
+			pexData = MV_32BIT_LE(pexData); /* Data always in LE */
+
+			/* restore the original window values */
+			mvAhbToMbusWinSet(winNum,&originWin);
+
+			/* restore original remap values*/
+			if ((1 == winNum)||(0 == winNum))
+			{
+			   MV_REG_WRITE(AHB_TO_MBUS_WIN_REMAP_LOW_REG(winNum),remapLow);
+			   MV_REG_WRITE(AHB_TO_MBUS_WIN_REMAP_HIGH_REG(winNum),remapHigh);
+
+			}
+		}
+	}
+	else
+#endif
+	{
+		/* Read the Data returned in the PEX Data register */
+		pexData = MV_REG_READ(PEX_CFG_DATA_REG(pexIf));
+
+	}
+
+	DB(mvOsPrintf("mvPexConfigRead: got : %x \n",pexData));
+	
+	return pexData;
+
+}
+
+/*******************************************************************************
+* mvPexConfigWrite - Write to configuration space
+*
+* DESCRIPTION:
+*       This function performs a 32 bit write to PEX configuration space.
+*       It supports both type 0 and type 1 of Configuration Transactions 
+*       (local and over bridge). In order to write to local bus segment, use 
+*       bus number retrieved from mvPexLocalBusNumGet(). Other bus numbers 
+*       will result configuration transaction of type 1 (over bridge).
+*
+* INPUT:
+*       pexIf   - PEX interface number.
+*       bus     - PEX segment bus number.
+*       dev     - PEX device number.
+*       func    - Function number.
+*       regOffs - Register offset.       
+*       data    - 32bit data.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPexConfigWrite(MV_U32 pexIf, MV_U32 bus, MV_U32 dev, 
+                           MV_U32 func, MV_U32 regOff, MV_U32 data)
+{
+#if defined(PCIE_VIRTUAL_BRIDGE_SUPPORT)
+        return mvPexVrtBrgConfigWrite (pexIf, bus, dev, func, regOff, data);
+}
+
+MV_STATUS mvPexHwConfigWrite(MV_U32 pexIf, MV_U32 bus, MV_U32 dev,
+                           MV_U32 func, MV_U32 regOff, MV_U32 data)
+{
+#endif
+	MV_U32 pexData = 0;
+	MV_U32	localDev,localBus;
+
+	/* Parameter checking   */
+	if (PEX_DEFAULT_IF != pexIf)
+	{
+		if (pexIf >= mvCtrlPexMaxIfGet())
+		{
+			mvOsPrintf("mvPexConfigWrite: ERR. Invalid PEX interface %d\n", 
+																		pexIf);
+			return MV_ERROR;
+		}
+	}
+
+	if (dev >= MAX_PEX_DEVICES)
+	{
+		mvOsPrintf("mvPexConfigWrite: ERR. device number illigal %d\n",dev);
+		return MV_BAD_PARAM;
+	}
+
+	if (func >= MAX_PEX_FUNCS)
+	{
+		mvOsPrintf("mvPexConfigWrite: ERR. function number illigal %d\n", func);
+		return MV_ERROR;
+	}
+
+	if (bus >= MAX_PEX_BUSSES)
+	{
+		mvOsPrintf("mvPexConfigWrite: ERR. bus number illigal %d\n", bus);
+		return MV_ERROR;
+	}
+
+
+
+	localDev = mvPexLocalDevNumGet(pexIf);
+	localBus = mvPexLocalBusNumGet(pexIf);
+
+	
+	/* in PCI Express we have only one device number other than ourselves*/
+	/* and this number is the first number we encounter 
+		else than the localDev that can be any valid dev number*/
+	/* pex spec define return on config read/write on any device */
+	if (bus == localBus)
+	{
+
+		if (localDev == 0)
+		{
+			/* if local dev is 0 then the first number we encounter 
+			after 0 is 1 */
+			if ((dev != 1)&&(dev != localDev))
+			{
+				return MV_ERROR;
+			}
+	
+		}
+		else
+		{
+			/* if local dev is not 0 then the first number we encounter 
+			is 0 */
+	
+			if ((dev != 0)&&(dev != localDev))
+			{
+				return MV_ERROR;
+			}
+		}
+
+		
+	}
+
+	/* if we are not accessing ourselves , then check the link */
+	if ((dev != localDev) || (bus != localBus) )
+	{
+		/* workarround */
+		/* when no link return MV_ERROR */
+
+		pexData = MV_REG_READ(PEX_STATUS_REG(pexIf));
+
+		if ((pexData & PXSR_DL_DOWN))
+		{
+			return MV_ERROR;
+		}
+
+	}
+
+	pexData =0;
+
+	/* Creating PEX address to be passed */
+	pexData |= (bus << PXCAR_BUS_NUM_OFFS);
+	pexData |= (dev << PXCAR_DEVICE_NUM_OFFS);
+	pexData |= (func << PXCAR_FUNC_NUM_OFFS);
+	pexData |= (regOff & PXCAR_REG_NUM_MASK); /* lgacy register space */
+	/* extended register space */
+	pexData |=(((regOff & PXCAR_REAL_EXT_REG_NUM_MASK) >> 
+				PXCAR_REAL_EXT_REG_NUM_OFFS) << PXCAR_EXT_REG_NUM_OFFS);
+	pexData |= PXCAR_CONFIG_EN; 
+	
+	DB(mvOsPrintf("mvPexConfigWrite: If=%x bus=%x func=%x dev=%x regOff=%x data=%x \n",
+		   pexIf,bus,func,dev,regOff,data,pexData) ); 
+
+	/* Write the address to the PEX configuration address register */
+	MV_REG_WRITE(PEX_CFG_ADDR_REG(pexIf), pexData);
+
+	/* Clear CPU pipe. Important where CPU can perform OOO execution */
+    	CPU_PIPE_FLUSH;
+
+	/* In order to let the PEX controller absorbed the address of the read 	*/
+	/* transaction we perform a validity check that the address was written */
+	if(pexData != MV_REG_READ(PEX_CFG_ADDR_REG(pexIf)))
+	{
+		return MV_ERROR;
+	}
+
+	/* Write the Data passed to the PEX Data register */
+	MV_REG_WRITE(PEX_CFG_DATA_REG(pexIf), data);
+
+	return MV_OK;
+
+}
+
+/*******************************************************************************
+* mvPexMasterEnable - Enable/disale PEX interface master transactions.
+*
+* DESCRIPTION:
+*       This function performs read modified write to PEX command status 
+*       (offset 0x4) to set/reset bit 2. After this bit is set, the PEX 
+*       master is allowed to gain ownership on the bus, otherwise it is 
+*       incapable to do so.
+*
+* INPUT:
+*       pexIf  - PEX interface number.
+*       enable - Enable/disable parameter.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPexMasterEnable(MV_U32 pexIf, MV_BOOL enable)
+{
+	MV_U32 pexCommandStatus;
+	MV_U32 localBus;
+	MV_U32 localDev;
+
+	/* Parameter checking   */
+	if (pexIf >= mvCtrlPexMaxIfGet())
+	{
+		mvOsPrintf("mvPexMasterEnable: ERR. Invalid PEX interface %d\n", pexIf);
+		return MV_ERROR;
+	}
+
+	localBus = mvPexLocalBusNumGet(pexIf);
+	localDev = mvPexLocalDevNumGet(pexIf);
+	
+	pexCommandStatus = MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf,
+							    PEX_STATUS_AND_COMMAND));
+
+
+	if (MV_TRUE == enable)
+	{
+		pexCommandStatus |= PXSAC_MASTER_EN;
+	}
+	else
+	{
+		pexCommandStatus &= ~PXSAC_MASTER_EN;
+	}
+
+	
+	MV_REG_WRITE(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_STATUS_AND_COMMAND),
+				 pexCommandStatus);
+
+	return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvPexSlaveEnable - Enable/disale PEX interface slave transactions.
+*
+* DESCRIPTION:
+*       This function performs read modified write to PEX command status 
+*       (offset 0x4) to set/reset bit 0 and 1. After those bits are set, 
+*       the PEX slave is allowed to respond to PEX IO space access (bit 0) 
+*       and PEX memory space access (bit 1). 
+*
+* INPUT:
+*       pexIf  - PEX interface number.
+*       dev     - PEX device number.
+*       enable - Enable/disable parameter.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPexSlaveEnable(MV_U32 pexIf, MV_U32 bus,MV_U32 dev, MV_BOOL enable)
+{
+	MV_U32 pexCommandStatus;
+	MV_U32 RegOffs;
+
+	/* Parameter checking   */
+	if (pexIf >= mvCtrlPexMaxIfGet())
+	{
+		mvOsPrintf("mvPexSlaveEnable: ERR. Invalid PEX interface %d\n", pexIf);
+		return MV_BAD_PARAM;
+	}
+	if (dev >= MAX_PEX_DEVICES)
+	{
+		mvOsPrintf("mvPexLocalDevNumSet: ERR. device number illigal %d\n", dev);
+		return MV_BAD_PARAM;
+
+	}
+
+	
+	RegOffs = PEX_STATUS_AND_COMMAND;
+	
+	pexCommandStatus = mvPexConfigRead(pexIf, bus, dev, 0, RegOffs);
+
+    if (MV_TRUE == enable)
+	{
+		pexCommandStatus |= (PXSAC_IO_EN | PXSAC_MEM_EN);
+	}
+	else                             
+	{
+		pexCommandStatus &= ~(PXSAC_IO_EN | PXSAC_MEM_EN);
+	}
+
+	mvPexConfigWrite(pexIf, bus, dev, 0, RegOffs, pexCommandStatus);
+
+	return MV_OK;
+
+}
+
+/*******************************************************************************
+* mvPexLocalBusNumSet - Set PEX interface local bus number.
+*
+* DESCRIPTION:
+*       This function sets given PEX interface its local bus number.
+*       Note: In case the PEX interface is PEX-X, the information is read-only.
+*
+* INPUT:
+*       pexIf  - PEX interface number.
+*       busNum - Bus number.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_NOT_ALLOWED in case PEX interface is PEX-X. 
+*		MV_BAD_PARAM on bad parameters ,
+*       otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPexLocalBusNumSet(MV_U32 pexIf, MV_U32 busNum)
+{
+	MV_U32 pexStatus;
+	MV_U32 localBus;
+	MV_U32 localDev;
+
+
+	/* Parameter checking   */
+	if (pexIf >= mvCtrlPexMaxIfGet())
+	{
+		mvOsPrintf("mvPexLocalBusNumSet: ERR. Invalid PEX interface %d\n",pexIf);
+		return MV_BAD_PARAM;
+	}
+	if (busNum >= MAX_PEX_BUSSES)
+	{
+		mvOsPrintf("mvPexLocalBusNumSet: ERR. bus number illigal %d\n", busNum);
+		return MV_ERROR;
+
+	}
+
+	localBus = mvPexLocalBusNumGet(pexIf);
+	localDev = mvPexLocalDevNumGet(pexIf);
+
+
+
+	pexStatus  = MV_REG_READ(PEX_STATUS_REG(pexIf));
+
+	pexStatus &= ~PXSR_PEX_BUS_NUM_MASK;
+
+	pexStatus |= (busNum << PXSR_PEX_BUS_NUM_OFFS) & PXSR_PEX_BUS_NUM_MASK;
+
+	MV_REG_WRITE(PEX_STATUS_REG(pexIf), pexStatus);
+
+
+	return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvPexLocalBusNumGet - Get PEX interface local bus number.
+*
+* DESCRIPTION:
+*       This function gets the local bus number of a given PEX interface.
+*
+* INPUT:
+*       pexIf  - PEX interface number.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       Local bus number.0xffffffff on Error
+*
+*******************************************************************************/
+MV_U32 mvPexLocalBusNumGet(MV_U32 pexIf)
+{
+	MV_U32 pexStatus;
+
+	/* Parameter checking   */
+	if (PEX_DEFAULT_IF != pexIf)
+	{
+		if (pexIf >= mvCtrlPexMaxIfGet())
+		{
+			mvOsPrintf("mvPexLocalBusNumGet: ERR. Invalid PEX interface %d\n",pexIf);
+			return 0xFFFFFFFF;
+		}
+	}
+
+
+	pexStatus  = MV_REG_READ(PEX_STATUS_REG(pexIf));
+
+	pexStatus &= PXSR_PEX_BUS_NUM_MASK;
+
+	return (pexStatus >> PXSR_PEX_BUS_NUM_OFFS);
+
+}
+
+
+/*******************************************************************************
+* mvPexLocalDevNumSet - Set PEX interface local device number.
+*
+* DESCRIPTION:
+*       This function sets given PEX interface its local device number.
+*       Note: In case the PEX interface is PEX-X, the information is read-only.
+*
+* INPUT:
+*       pexIf  - PEX interface number.
+*       devNum - Device number.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_NOT_ALLOWED in case PEX interface is PEX-X. 
+*		MV_BAD_PARAM on bad parameters ,
+*       otherwise MV_OK
+*
+*******************************************************************************/
+MV_STATUS mvPexLocalDevNumSet(MV_U32 pexIf, MV_U32 devNum)
+{
+	MV_U32 pexStatus;
+	MV_U32 localBus;
+	MV_U32 localDev;
+
+	/* Parameter checking   */
+	if (pexIf >= mvCtrlPexMaxIfGet())
+	{
+		mvOsPrintf("mvPexLocalDevNumSet: ERR. Invalid PEX interface %d\n",pexIf);
+		return MV_BAD_PARAM;
+	}
+	if (devNum >= MAX_PEX_DEVICES)
+	{
+		mvOsPrintf("mvPexLocalDevNumSet: ERR. device number illigal %d\n", 
+																	   devNum);
+		return MV_BAD_PARAM;
+
+	}
+	
+	localBus = mvPexLocalBusNumGet(pexIf);
+	localDev = mvPexLocalDevNumGet(pexIf);
+
+
+	pexStatus  = MV_REG_READ(PEX_STATUS_REG(pexIf));
+
+	pexStatus &= ~PXSR_PEX_DEV_NUM_MASK;
+
+	pexStatus |= (devNum << PXSR_PEX_DEV_NUM_OFFS) & PXSR_PEX_DEV_NUM_MASK;
+
+	MV_REG_WRITE(PEX_STATUS_REG(pexIf), pexStatus);
+
+
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvPexLocalDevNumGet - Get PEX interface local device number.
+*
+* DESCRIPTION:
+*       This function gets the local device number of a given PEX interface.
+*
+* INPUT:
+*       pexIf  - PEX interface number.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       Local device number. 0xffffffff on Error
+*
+*******************************************************************************/
+MV_U32 mvPexLocalDevNumGet(MV_U32 pexIf)
+{
+	MV_U32 pexStatus;
+
+	/* Parameter checking   */
+	
+	if (PEX_DEFAULT_IF != pexIf)
+	{
+		if (pexIf >= mvCtrlPexMaxIfGet())
+		{
+			mvOsPrintf("mvPexLocalDevNumGet: ERR. Invalid PEX interface %d\n", 
+																   		pexIf);
+			return 0xFFFFFFFF;
+		}
+	}
+	
+	pexStatus  = MV_REG_READ(PEX_STATUS_REG(pexIf));
+
+	pexStatus &= PXSR_PEX_DEV_NUM_MASK;
+
+	return (pexStatus >> PXSR_PEX_DEV_NUM_OFFS);
+}
+
+MV_VOID mvPexPhyRegRead(MV_U32 pexIf, MV_U32 regOffset, MV_U16 *value)
+{
+
+	MV_U32 regAddr;
+	if (pexIf >= mvCtrlPexMaxIfGet())
+	{
+		mvOsPrintf("mvPexPhyRegRead: ERR. Invalid PEX interface %d\n", pexIf);
+		return;
+	}
+	regAddr = (BIT31 | ((regOffset & 0x3fff) << 16));
+	MV_REG_WRITE(PEX_PHY_ACCESS_REG(pexIf), regAddr);
+	*value = MV_REG_READ(PEX_PHY_ACCESS_REG(pexIf)); 
+}
+
+
+MV_VOID mvPexPhyRegWrite(MV_U32 pexIf, MV_U32 regOffset, MV_U16 value)
+{
+
+	MV_U32 regAddr;
+	if(pexIf >= mvCtrlPexMaxIfGet())
+	{
+		mvOsPrintf("mvPexPhyRegWrite: ERR. Invalid PEX interface %d\n", pexIf);
+		return;
+	}
+	regAddr = (((regOffset & 0x3fff) << 16) | value);
+	MV_REG_WRITE(PEX_PHY_ACCESS_REG(pexIf), regAddr);
+}
+
+/*******************************************************************************
+* mvPexActiveStateLinkPMEnable
+*
+* DESCRIPTION:
+*       Enable Active Link State Power Management
+*
+* INPUT:
+*       pexIf   - PEX interface number.
+*	enable	- MV_TRUE to enable ASPM, MV_FALSE to disable.
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       MV_OK on success , MV_ERROR otherwise
+*
+*******************************************************************************/
+MV_STATUS mvPexActiveStateLinkPMEnable(MV_U32 pexIf, MV_BOOL enable)
+{
+	MV_U32 reg;
+
+	if(pexIf >= mvCtrlPexMaxIfGet())
+	{
+		mvOsPrintf("mvPexActiveStateLinkPMEnable: ERR. Invalid PEX interface %d\n", pexIf);
+		return MV_ERROR;
+	}
+
+	reg = MV_REG_READ(PEX_PWR_MNG_EXT_REG(pexIf)) & ~PXPMER_L1_ASPM_EN_MASK;
+	if(enable == MV_TRUE)
+		reg |= PXPMER_L1_ASPM_EN_MASK;
+	MV_REG_WRITE(PEX_PWR_MNG_EXT_REG(pexIf), reg);
+
+	/* Enable / Disable L0/1 entry */ 
+	reg = MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf, PEX_LINK_CTRL_STAT_REG))
+			& ~PXLCSR_ASPM_CNT_MASK;
+	if(enable == MV_TRUE)
+		reg |= PXLCSR_ASPM_CNT_L0S_L1S_ENT_SUPP;
+	MV_REG_WRITE(PEX_CFG_DIRECT_ACCESS(pexIf, PEX_LINK_CTRL_STAT_REG), reg);
+
+	return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvPexForceX1
+*
+* DESCRIPTION:
+*       shut down lanes 1-3 if recognize that attached to an x1 end-point
+* INPUT:
+*       pexIf   - PEX interface number.
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       MV_OK on success , MV_ERROR otherwise
+*
+*******************************************************************************/
+MV_U32 mvPexForceX1(MV_U32 pexIf)
+{
+	MV_U32 regData = 0;
+	if(pexIf >= mvCtrlPexMaxIfGet())
+	{
+		mvOsPrintf("mvPexForceX1: ERR. Invalid PEX interface %d\n", pexIf);
+		return MV_BAD_PARAM;
+	}
+
+	regData  = MV_REG_READ(PEX_CTRL_REG(pexIf)) & ~(PXCR_CONF_LINK_MASK) ;
+	regData |= PXCR_CONF_LINK_X1;
+
+	MV_REG_WRITE(PEX_CTRL_REG(pexIf), regData);
+	return MV_OK;
+}
+
+MV_BOOL mvPexIsPowerUp(MV_U32 pexIf)
+{
+	if(pexIf >= mvCtrlPexMaxIfGet())
+	{
+		mvOsPrintf("mvPexIsPowerUp: ERR. Invalid PEX interface %d\n", pexIf);
+		return MV_FALSE;
+	}
+	return mvCtrlPwrClckGet(PEX_UNIT_ID, pexIf);	
+}
+
+
+MV_VOID mvPexPowerDown(MV_U32 pexIf)
+{
+	if ( (mvCtrlModelGet() == MV_78XX0_DEV_ID) ||
+		(mvCtrlModelGet() == MV_76100_DEV_ID) ||
+		(mvCtrlModelGet() == MV_78100_DEV_ID) ||
+		(mvCtrlModelGet() == MV_78200_DEV_ID) )
+	{
+		mvCtrlPwrClckSet(PEX_UNIT_ID, pexIf, MV_FALSE);	
+	}
+	else
+	{
+		MV_REG_WRITE((0x41B00 -(pexIf)*0x10000), 0x20800087);
+	}
+}
+
+
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvPex.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvPex.h
new file mode 100644
index 0000000000..d8f1cdd9f9
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvPex.h
@@ -0,0 +1,168 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCPEXH
+#define __INCPEXH
+
+#include "mvCommon.h"
+#include "mvOs.h"
+#include "pex/mvPexRegs.h"
+#include "ctrlEnv/mvCtrlEnvSpec.h"
+
+
+
+/* NOTE not supported in this driver:*/
+  
+
+/* defines */
+/* The number of supported PEX interfaces depend on Marvell controller 		*/
+/* device number. This device number ID is located on the PEX unit 			*/
+/* configuration header. This creates a loop where calling PEX 				*/
+/* configuration read/write	routine results a call to get PEX configuration */
+/* information etc. This macro defines a default PEX interface. This PEX	*/
+/* interface is sure to exist.												*/
+#define PEX_DEFAULT_IF	0
+
+
+/* typedefs */
+/* The Marvell controller supports both root complex and end point devices */
+/* This enumeration describes the PEX type.                                 */
+typedef enum _mvPexType
+{
+    MV_PEX_ROOT_COMPLEX,   	/* root complex device */
+    MV_PEX_END_POINT        /* end point device */
+}MV_PEX_TYPE;
+
+typedef enum _mvPexWidth
+{
+    MV_PEX_WITDH_X1 = 1,
+    MV_PEX_WITDH_X2,
+    MV_PEX_WITDH_X3,
+    MV_PEX_WITDH_X4,
+    MV_PEX_WITDH_INVALID
+}MV_PEX_WIDTH;
+
+/* PEX Bar attributes */
+typedef struct _mvPexMode
+{
+	MV_PEX_TYPE 	pexType;
+	MV_PEX_WIDTH    pexWidth;
+	MV_BOOL         pexLinkUp;
+}MV_PEX_MODE;
+
+
+
+/* Global Functions prototypes */
+/* mvPexInit - Initialize PEX interfaces*/
+MV_STATUS mvPexHalInit(MV_U32 pexIf, MV_PEX_TYPE pexType);
+
+/* mvPexModeGet - Get Pex If mode */
+MV_U32 mvPexModeGet(MV_U32 pexIf,MV_PEX_MODE *pexMode);
+
+/* mvPexConfigRead - Read from configuration space */
+MV_U32 mvPexConfigRead (MV_U32 pexIf, MV_U32 bus, MV_U32 dev,
+						MV_U32 func,MV_U32 regOff);
+
+/* mvPexConfigWrite - Write to configuration space */
+MV_STATUS mvPexConfigWrite(MV_U32 pexIf, MV_U32 bus, MV_U32 dev,
+                           MV_U32 func, MV_U32 regOff, MV_U32 data);
+
+/* mvPexMasterEnable - Enable/disale PEX interface master transactions.*/
+MV_STATUS mvPexMasterEnable(MV_U32 pexIf, MV_BOOL enable);
+
+/* mvPexSlaveEnable - Enable/disale PEX interface slave transactions.*/
+MV_STATUS mvPexSlaveEnable(MV_U32 pexIf, MV_U32 bus,MV_U32 dev, MV_BOOL enable);
+
+/* mvPexLocalBusNumSet - Set PEX interface local bus number.*/
+MV_STATUS mvPexLocalBusNumSet(MV_U32 pexIf, MV_U32 busNum);
+
+/* mvPexLocalBusNumGet - Get PEX interface local bus number.*/
+MV_U32 mvPexLocalBusNumGet(MV_U32 pexIf);
+
+/* mvPexLocalDevNumSet - Set PEX interface local device number.*/
+MV_STATUS mvPexLocalDevNumSet(MV_U32 pexIf, MV_U32 devNum);
+
+/* mvPexLocalDevNumGet - Get PEX interface local device number.*/
+MV_U32 mvPexLocalDevNumGet(MV_U32 pexIf);
+/* mvPexForceX1 - Force PEX interface to X1 mode. */
+MV_U32 mvPexForceX1(MV_U32 pexIf);
+
+/* mvPexIsPowerUp - Is PEX interface Power up? */
+MV_BOOL mvPexIsPowerUp(MV_U32 pexIf);
+
+/* mvPexPowerDown - Power Down */
+MV_VOID mvPexPowerDown(MV_U32 pexIf);
+
+/* mvPexPowerUp - Power Up */
+MV_VOID mvPexPowerUp(MV_U32 pexIf);
+
+/* mvPexPhyRegRead - Pex phy read */
+MV_VOID mvPexPhyRegRead(MV_U32 pexIf, MV_U32 regOffset, MV_U16 *value);
+
+/* mvPexPhyRegWrite - Pex phy write */
+MV_VOID mvPexPhyRegWrite(MV_U32 pexIf, MV_U32 regOffset, MV_U16 value);
+
+MV_STATUS mvPexActiveStateLinkPMEnable(MV_U32 pexIf, MV_BOOL enable);
+
+#endif /* #ifndef __INCPEXH */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvPexRegs.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvPexRegs.h
new file mode 100644
index 0000000000..8ac1698364
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvPexRegs.h
@@ -0,0 +1,751 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCPEXREGSH
+#define __INCPEXREGSH
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* defines */
+#define MAX_PEX_DEVICES         32
+#define MAX_PEX_FUNCS           8
+#define MAX_PEX_BUSSES          256
+
+
+
+/*********************************************************/
+/* PCI Express Configuration Cycles Generation Registers */
+/*********************************************************/
+
+#define PEX_CFG_ADDR_REG(pexIf)		((PEX_IF_BASE(pexIf)) + 0x18F8)
+#define PEX_CFG_DATA_REG(pexIf)		((PEX_IF_BASE(pexIf)) + 0x18FC)
+#define PEX_PHY_ACCESS_REG(pexIf)	((PEX_IF_BASE(pexIf)) + 0x1B00)
+/* PCI Express Configuration Address Register */
+/* PEX_CFG_ADDR_REG (PXCAR)*/
+
+#define PXCAR_REG_NUM_OFFS			2
+#define PXCAR_REG_NUM_MAX			0x3F
+#define PXCAR_REG_NUM_MASK			(PXCAR_REG_NUM_MAX << PXCAR_REG_NUM_OFFS)
+#define PXCAR_FUNC_NUM_OFFS			8
+#define PXCAR_FUNC_NUM_MAX			0x7
+#define PXCAR_FUNC_NUM_MASK			(PXCAR_FUNC_NUM_MAX << PXCAR_FUNC_NUM_OFFS)
+#define PXCAR_DEVICE_NUM_OFFS		11
+#define PXCAR_DEVICE_NUM_MAX		0x1F
+#define PXCAR_DEVICE_NUM_MASK		(PXCAR_DEVICE_NUM_MAX << PXCAR_DEVICE_NUM_OFFS)
+#define PXCAR_BUS_NUM_OFFS			16
+#define PXCAR_BUS_NUM_MAX			0xFF
+#define PXCAR_BUS_NUM_MASK			(PXCAR_BUS_NUM_MAX << PXCAR_BUS_NUM_OFFS)
+#define PXCAR_EXT_REG_NUM_OFFS		24
+#define PXCAR_EXT_REG_NUM_MAX		0xF
+
+/* in pci express register address is now the legacy register address (8 bits)
+with the new extended register address (more 4 bits) , below is the mask of
+the upper 4 bits of the full register address */
+
+#define PXCAR_REAL_EXT_REG_NUM_OFFS	8
+#define PXCAR_EXT_REG_NUM_MASK		(PXCAR_EXT_REG_NUM_MAX << PXCAR_EXT_REG_NUM_OFFS)
+#define PXCAR_CONFIG_EN				BIT31
+
+#define PXCAR_REAL_EXT_REG_NUM_OFFS     8
+#define PXCAR_REAL_EXT_REG_NUM_MASK     (0xF << PXCAR_REAL_EXT_REG_NUM_OFFS)
+
+/* The traditional PCI spec defined 6-bit field to describe register offset.*/ 
+/* The new PCI Express extend the register offset by an extra 4-bits.       */
+/* The below macro assign 10-bit register offset into the apprpreate        */
+/* fields in the CFG_ADDR_REG                                               */
+#define PXCAR_REG_OFFS_SET(regOffs)                         \
+ ( (regOff & PXCAR_REG_NUM_MASK) | \
+   ( ((regOff & PXCAR_REAL_EXT_REG_NUM_MASK) >> PXCAR_REAL_EXT_REG_NUM_OFFS) << PXCAR_EXT_REG_NUM_OFFS) )
+
+/***********************************/
+/* PCI Express Interrupt registers */
+/***********************************/
+#define PEX_CAUSE_REG(pexIf)		((PEX_IF_BASE(pexIf)) + 0x1900)
+#define PEX_MASK_REG(pexIf)		((PEX_IF_BASE(pexIf)) + 0x1910)
+
+#define PXICR_TX_REQ_IN_DLDOWN_ERR  BIT0  /* Transmit request while field   */
+                                          /* <DLDown> of the PCI Express    */
+/* PCI Express Interrupt Cause */
+/* PEX_INT_CAUSE_REG  (PXICR)*/
+/* PEX_INT_MASK_REG*/
+/*
+NOTE:All bits except bits[27:24] are Read/Write Clear only. A cause bit sets
+upon an error event occurrence. A write of 0 clears the bit. A write of 1 has
+no affect. Bits[24:27} are set and cleared upon reception of interrupt
+emulation messages.
+
+Mask bit per cause bit. If a bit is set to 1, the corresponding event is
+enabled. Mask does not affect setting of the Interrupt Cause register bits;
+it only affects the assertion of the interrupt .*/
+                                          
+
+#define PXICR_MDIS_CAUSE			BIT1  /* Attempt to generate PCI transaction 
+                                             while master is disabled */
+#define PXICR_ERR_WRTO_REG_CAUSE	BIT3  /* Erroneous write attempt to
+                                             PCI Express internal register*/
+#define PXICR_HIT_DFLT_WIN_ERR		BIT4  /* Hit Default Window Error */
+#define PXICR_RX_RAM_PAR_ERR        BIT6  /* Rx RAM Parity Error */
+#define PXICR_TX_RAM_PAR_ERR        BIT7  /* Tx RAM Parity Error */
+#define PXICR_COR_ERR_DET			BIT8  /* Correctable Error Detected*/
+#define PXICR_NF_ERR_DET			BIT9  /* Non-Fatal Error Detected*/
+#define PXICR_FERR_DET				BIT10 /* Fatal Error Detected*/
+#define PXICR_DSTATE_CHANGE			BIT11 /* Dstate Change Indication*/
+#define PXICR_BIST					BIT12 /* PCI-Express BIST activated*/
+#define PXICR_FLW_CTRL_PROT     BIT14 /* Flow Control Protocol Error */
+
+#define PXICR_RCV_UR_CA_ERR         BIT15 /* Received UR or CA status. */
+#define PXICR_RCV_ERR_FATAL			BIT16 /* Received ERR_FATAL message.*/
+#define PXICR_RCV_ERR_NON_FATAL		BIT17 /* Received ERR_NONFATAL message*/
+#define PXICR_RCV_ERR_COR			BIT18 /* Received ERR_COR message.*/
+#define PXICR_RCV_CRS				BIT19 /* Received CRS completion status*/
+#define PXICR_SLV_HOT_RESET			BIT20 /* Received Hot Reset Indication*/
+#define PXICR_SLV_DIS_LINK			BIT21 /* Slave Disable Link Indication*/
+#define PXICR_SLV_LB				BIT22 /* Slave Loopback Indication*/
+#define PXICR_LINK_FAIL				BIT23 /* Link Failure indication.*/
+#define PXICR_RCV_INTA				BIT24 /* IntA status.*/
+#define PXICR_RCV_INTB				BIT25 /* IntB status.*/
+#define PXICR_RCV_INTC				BIT26 /* IntC status.*/
+#define PXICR_RCV_INTD				BIT27 /* IntD status.*/
+#define PXICR_RCV_PM_PME            BIT28 /* Received PM_PME message. */
+
+
+/********************************************/
+/* PCI Express Control and Status Registers */
+/********************************************/
+#define PEX_CTRL_REG(pexIf)				((PEX_IF_BASE(pexIf)) + 0x1A00)
+#define PEX_STATUS_REG(pexIf)				((PEX_IF_BASE(pexIf)) + 0x1A04)
+#define PEX_COMPLT_TMEOUT_REG(pexIf)			((PEX_IF_BASE(pexIf)) + 0x1A10)
+#define PEX_PWR_MNG_EXT_REG(pexIf)			((PEX_IF_BASE(pexIf)) + 0x1A18)
+#define PEX_FLOW_CTRL_REG(pexIf)			((PEX_IF_BASE(pexIf)) + 0x1A20)
+#define PEX_ACK_TMR_4X_REG(pexIf)			((PEX_IF_BASE(pexIf)) + 0x1A30)
+#define PEX_ACK_TMR_1X_REG(pexIf)			((PEX_IF_BASE(pexIf)) + 0x1A40)
+#define PEX_TL_CTRL_REG(pexIf)				((PEX_IF_BASE(pexIf)) + 0x1AB0)
+
+
+#define PEX_RAM_PARITY_CTRL_REG(pexIf)  		((PEX_IF_BASE(pexIf)) + 0x1A50)
+/* PCI Express Control Register */
+/* PEX_CTRL_REG (PXCR) */
+
+#define PXCR_CONF_LINK_OFFS             0
+#define PXCR_CONF_LINK_MASK             (1 << PXCR_CONF_LINK_OFFS)
+#define PXCR_CONF_LINK_X4               (0 << PXCR_CONF_LINK_OFFS)
+#define PXCR_CONF_LINK_X1               (1 << PXCR_CONF_LINK_OFFS)
+#define PXCR_DEV_TYPE_CTRL_OFFS			1     /*PCI ExpressDevice Type Control*/
+#define PXCR_DEV_TYPE_CTRL_MASK			BIT1
+#define PXCR_DEV_TYPE_CTRL_CMPLX		(1 << PXCR_DEV_TYPE_CTRL_OFFS)
+#define PXCR_DEV_TYPE_CTRL_POINT		(0 << PXCR_DEV_TYPE_CTRL_OFFS)
+#define PXCR_CFG_MAP_TO_MEM_EN			BIT2  /* Configuration Header Mapping 
+											   to Memory Space Enable         */
+
+#define PXCR_CFG_MAP_TO_MEM_EN			BIT2 /* Configuration Header Mapping 
+											   to Memory Space Enable*/
+
+#define PXCR_RSRV1_OFFS					5
+#define PXCR_RSRV1_MASK					(0x7 << PXCR_RSRV1_OFFS)
+#define PXCR_RSRV1_VAL					(0x0 << PXCR_RSRV1_OFFS)
+
+#define PXCR_CONF_MAX_OUTSTND_OFFS		8 /*Maximum outstanding NP requests as a master*/
+#define PXCR_CONF_MAX_OUTSTND_MASK		(0x3 << PXCR_CONF_MAX_OUTSTND_OFFS)
+
+
+#define PXCR_CONF_NFTS_OFFS				16 /*number of FTS Ordered-Sets*/
+#define PXCR_CONF_NFTS_MASK				(0xff << PXCR_CONF_NFTS_OFFS)
+
+#define PXCR_CONF_MSTR_HOT_RESET		BIT24 /*Master Hot-Reset.*/
+#define PXCR_CONF_MSTR_LB				BIT26 /* Master Loopback */
+#define PXCR_CONF_MSTR_DIS_SCRMB		BIT27 /* Master Disable Scrambling*/
+#define PXCR_CONF_DIRECT_DIS_SCRMB		BIT28 /* Direct Disable Scrambling*/
+
+/* PCI Express Status Register */
+/* PEX_STATUS_REG (PXSR) */
+
+#define PXSR_DL_DOWN					BIT0 /* DL_Down indication.*/
+
+#define PXSR_PEX_BUS_NUM_OFFS			8 /* Bus Number Indication */
+#define PXSR_PEX_BUS_NUM_MASK			(0xff << PXSR_PEX_BUS_NUM_OFFS)
+
+#define PXSR_PEX_DEV_NUM_OFFS			16 /* Device Number Indication */
+#define PXSR_PEX_DEV_NUM_MASK			(0x1f << PXSR_PEX_DEV_NUM_OFFS)
+
+#define PXSR_PEX_SLV_HOT_RESET			BIT24 /* Slave Hot Reset Indication*/
+#define PXSR_PEX_SLV_DIS_LINK			BIT25 /* Slave Disable Link Indication*/
+#define PXSR_PEX_SLV_LB					BIT26 /* Slave Loopback Indication*/
+#define PXSR_PEX_SLV_DIS_SCRMB			BIT27 /* Slave Disable Scrambling Indication*/
+
+
+/* PCI Express Completion Timeout Register */
+/* PEX_COMPLT_TMEOUT_REG (PXCTR)*/
+
+#define PXCTR_CMP_TO_THRSHLD_OFFS		0 /* Completion Timeout Threshold */
+#define PXCTR_CMP_TO_THRSHLD_MASK		(0xffff << PXCTR_CMP_TO_THRSHLD_OFFS)
+
+/* PCI Express Power Management Extended Register */
+/* PEX_PWR_MNG_EXT_REG (PXPMER) */
+
+#define PXPMER_L1_ASPM_EN_OFFS			1
+#define PXPMER_L1_ASPM_EN_MASK			(0x1 << PXPMER_L1_ASPM_EN_OFFS)
+
+/* PCI Express Flow Control Register */
+/* PEX_FLOW_CTRL_REG (PXFCR)*/
+
+#define PXFCR_PH_INIT_FC_OFFS			0 /*Posted Headers Flow Control Credit
+										    Initial Value.*/
+#define PXFCR_PH_INIT_FC_MASK			(0xff << PXFCR_PH_INIT_FC_OFFS)
+
+
+#define PXFCR_NPH_INIT_FC_OFFS			8 /* Classified Non-Posted Headers
+											 Flow Control Credit Initial Value*/
+#define PXFCR_NPH_INIT_FC_MASK			(0xff << PXFCR_NPH_INIT_FC_OFFS)
+
+#define PXFCR_CH_INIT_FC_OFFS			16 /* Completion Headers Flow Control
+											  Credit Initial Value Infinite*/
+										
+#define PXFCR_CH_INIT_FC_MASK			(0xff << PXFCR_CH_INIT_FC_OFFS)
+
+#define PXFCR_FC_UPDATE_TO_OFFS			24 /* Flow Control Update Timeout */
+#define PXFCR_FC_UPDATE_TO_MASK			(0xff << PXFCR_FC_UPDATE_TO_OFFS)
+
+/* PCI Express Acknowledge Timers (4X) Register */
+/* PEX_ACK_TMR_4X_REG (PXAT4R) */
+#define PXAT1R_ACK_LAT_TOX4_OFFS		0  /* Ack Latency Timer Timeout Value */
+#define PXAT1R_ACK_LAT_TOX4_MASK		(0xffff << PXAT4R_ACK_LAT_TOX1_OFFS)
+#define PXAT1R_ACK_RPLY_TOX4_OFFS		16 /* Ack Replay Timer Timeout Value  */
+#define PXAT1R_ACK_RPLY_TOX4_MASK		(0xffff << PXAT1R_ACK_RPLY_TOX1_OFFS)
+
+/* PCI Express Acknowledge Timers (1X) Register */
+/* PEX_ACK_TMR_1X_REG (PXAT1R) */
+
+#define PXAT1R_ACK_LAT_TOX1_OFFS		0 /* Acknowledge Latency Timer Timeout
+										     Value for 1X Link*/
+#define PXAT1R_ACK_LAT_TOX1_MASK		(0xffff << PXAT1R_ACK_LAT_TOX1_OFFS)
+
+#define PXAT1R_ACK_RPLY_TOX1_OFFS		16 /* Acknowledge Replay Timer Timeout
+											  Value for 1X*/
+#define PXAT1R_ACK_RPLY_TOX1_MASK		(0xffff << PXAT1R_ACK_RPLY_TOX1_OFFS)
+
+
+/* PCI Express TL Control Register */
+/* PEX_TL_CTRL_REG (PXTCR) */
+
+#define PXTCR_TX_CMP_BUFF_NO_OFFS		8 /*Number of completion buffers in Tx*/
+#define PXTCR_TX_CMP_BUFF_NO_MASK		(0xf << PXTCR_TX_CMP_BUFF_NO_OFFS)
+
+/* PCI Express Debug MAC Control Register */
+/* PEX_DEBUG_MAC_CTRL_REG (PXDMCR) */
+
+#define PXDMCR_LINKUP					BIT4
+
+
+
+/**********************************************/
+/* PCI Express Configuration Header Registers */
+/**********************************************/
+#define PEX_CFG_DIRECT_ACCESS(pexIf,cfgReg)	((PEX_IF_BASE(pexIf)) + (cfgReg))
+
+#define PEX_DEVICE_AND_VENDOR_ID					0x000
+#define PEX_STATUS_AND_COMMAND						0x004
+#define PEX_CLASS_CODE_AND_REVISION_ID			    0x008
+#define PEX_BIST_HDR_TYPE_LAT_TMR_CACHE_LINE		0x00C
+#define PEX_MEMORY_BAR_BASE_ADDR(barNum)		 	(0x010 + ((barNum) << 2))
+#define PEX_MV_BAR_BASE(barNum)						(0x010 + (barNum) * 8)
+#define PEX_MV_BAR_BASE_HIGH(barNum)				(0x014 + (barNum) * 8)
+#define PEX_BAR0_INTER_REG							0x010
+#define PEX_BAR0_INTER_REG_HIGH						0x014
+#define PEX_BAR1_REG								0x018
+#define PEX_BAR1_REG_HIGH							0x01C
+#define PEX_BAR2_REG								0x020
+#define PEX_BAR2_REG_HIGH							0x024
+
+#define PEX_SUBSYS_ID_AND_SUBSYS_VENDOR_ID			0x02C
+#define PEX_EXPANSION_ROM_BASE_ADDR_REG				0x030
+#define PEX_CAPABILTY_LIST_POINTER					0x034
+#define PEX_INTERRUPT_PIN_AND_LINE					0x03C
+
+/* capability list */
+#define PEX_POWER_MNG_CAPABILITY		            0x040
+#define PEX_POWER_MNG_STATUS_CONTROL		        0x044
+
+#define PEX_MSI_MESSAGE_CONTROL						0x050
+#define PEX_MSI_MESSAGE_ADDR		                0x054
+#define PEX_MSI_MESSAGE_HIGH_ADDR		            0x058
+#define PEX_MSI_MESSAGE_DATA		                0x05C
+
+#define PEX_CAPABILITY_REG							0x60
+#define PEX_DEV_CAPABILITY_REG						0x64
+#define PEX_DEV_CTRL_STAT_REG						0x68
+#define PEX_LINK_CAPABILITY_REG						0x6C
+#define PEX_LINK_CTRL_STAT_REG						0x70
+
+#define PEX_ADV_ERR_RPRT_HDR_TRGT_REG				0x100
+#define PEX_UNCORRECT_ERR_STAT_REG					0x104
+#define PEX_UNCORRECT_ERR_MASK_REG					0x108
+#define PEX_UNCORRECT_ERR_SERVITY_REG				0x10C
+#define PEX_CORRECT_ERR_STAT_REG					0x110
+#define PEX_CORRECT_ERR_MASK_REG					0x114
+#define PEX_ADV_ERR_CAPABILITY_CTRL_REG				0x118
+#define PEX_HDR_LOG_FIRST_DWORD_REG					0x11C
+#define PEX_HDR_LOG_SECOND_DWORD_REG				0x120
+#define PEX_HDR_LOG_THIRD_DWORD_REG					0x124
+#define PEX_HDR_LOG_FOURTH_DWORD_REG				0x128
+
+
+
+/* PCI Express Device and Vendor ID Register*/
+/*PEX_DEVICE_AND_VENDOR_ID (PXDAVI)*/
+
+#define PXDAVI_VEN_ID_OFFS			0 	/* Vendor ID */
+#define PXDAVI_VEN_ID_MASK			(0xffff << PXDAVI_VEN_ID_OFFS)
+
+#define PXDAVI_DEV_ID_OFFS			16	/* Device ID */
+#define PXDAVI_DEV_ID_MASK  		(0xffff << PXDAVI_DEV_ID_OFFS)
+
+
+/* PCI Express Command and Status Register*/
+/*PEX_STATUS_AND_COMMAND (PXSAC)*/
+
+#define PXSAC_IO_EN			BIT0 	/* IO Enable 							  */
+#define PXSAC_MEM_EN		BIT1	/* Memory Enable 						  */
+#define PXSAC_MASTER_EN		BIT2	/* Master Enable 						  */
+#define PXSAC_PERR_EN		BIT6	/* Parity Errors Respond Enable 		  */
+#define PXSAC_SERR_EN		BIT8	/* Ability to assert SERR# line			  */
+#define PXSAC_INT_DIS		BIT10   /* Interrupt Disable 					  */
+#define PXSAC_INT_STAT		BIT19   /* Interrupt Status 			*/
+#define PXSAC_CAP_LIST		BIT20	/* Capability List Support 				  */
+#define PXSAC_MAS_DATA_PERR	BIT24   /* Master Data Parity Error				  */
+#define PXSAC_SLAVE_TABORT	BIT27	/* Signalled Target Abort 	*/
+#define PXSAC_RT_ABORT		BIT28	/* Recieved Target Abort 	*/
+#define PXSAC_MABORT			BIT29	/* Recieved Master Abort 	*/
+#define PXSAC_SYSERR			BIT30	/* Signalled system error 	*/
+#define PXSAC_DET_PARERR		BIT31	/* Detect Parity Error 		*/
+
+
+/* PCI Express Class Code and Revision ID Register*/
+/*PEX_CLASS_CODE_AND_REVISION_ID (PXCCARI)*/       
+
+#define PXCCARI_REVID_OFFS		0		/* Revision ID */
+#define PXCCARI_REVID_MASK		(0xff << PXCCARI_REVID_OFFS)
+
+#define PXCCARI_FULL_CLASS_OFFS	8		/* Full Class Code */
+#define PXCCARI_FULL_CLASS_MASK	(0xffffff << PXCCARI_FULL_CLASS_OFFS)
+
+#define PXCCARI_PROGIF_OFFS		8		/* Prog .I/F*/
+#define PXCCARI_PROGIF_MASK		(0xff << PXCCARI_PROGIF_OFFS)
+
+#define PXCCARI_SUB_CLASS_OFFS	16		/* Sub Class*/
+#define PXCCARI_SUB_CLASS_MASK	(0xff << PXCCARI_SUB_CLASS_OFFS)
+
+#define PXCCARI_BASE_CLASS_OFFS	24		/* Base Class*/
+#define PXCCARI_BASE_CLASS_MASK	(0xff << PXCCARI_BASE_CLASS_OFFS)
+
+
+/* PCI Express BIST, Header Type and Cache Line Size Register*/
+/*PEX_BIST_HDR_TYPE_LAT_TMR_CACHE_LINE (PXBHTLTCL)*/ 
+
+#define PXBHTLTCL_CACHELINE_OFFS		0	/* Specifies the cache line size */
+#define PXBHTLTCL_CACHELINE_MASK		(0xff << PXBHTLTCL_CACHELINE_OFFS)
+
+#define PXBHTLTCL_HEADTYPE_FULL_OFFS	16	/* Full Header Type */
+#define PXBHTLTCL_HEADTYPE_FULL_MASK	(0xff << PXBHTLTCL_HEADTYPE_FULL_OFFS)
+
+#define PXBHTLTCL_MULTI_FUNC			BIT23	/* Multi/Single function */
+
+#define PXBHTLTCL_HEADER_OFFS			16		/* Header type */
+#define PXBHTLTCL_HEADER_MASK			(0x7f << PXBHTLTCL_HEADER_OFFS)
+#define PXBHTLTCL_HEADER_STANDARD		(0x0 << PXBHTLTCL_HEADER_OFFS)
+#define PXBHTLTCL_HEADER_PCI2PCI_BRIDGE	(0x1 << PXBHTLTCL_HEADER_OFFS)
+
+
+#define PXBHTLTCL_BISTCOMP_OFFS		24	/* BIST Completion Code */
+#define PXBHTLTCL_BISTCOMP_MASK		(0xf << PXBHTLTCL_BISTCOMP_OFFS)
+
+#define PXBHTLTCL_BISTACT			BIT30	/* BIST Activate bit */
+#define PXBHTLTCL_BISTCAP			BIT31	/* BIST Capable Bit */
+#define PXBHTLTCL_BISTCAP_OFFS		31	
+#define PXBHTLTCL_BISTCAP_MASK		BIT31	
+#define PXBHTLTCL_BISTCAP_VAL		0
+
+
+/* PCI Express Subsystem Device and Vendor ID */
+/*PEX_SUBSYS_ID_AND_SUBSYS_VENDOR_ID (PXSIASVI)*/
+
+#define PXSIASVI_VENID_OFFS	0	/* Subsystem Manufacturer Vendor ID Number */
+#define PXSIASVI_VENID_MASK	(0xffff << PXSIASVI_VENID_OFFS)
+
+#define PXSIASVI_DEVID_OFFS	16	/* Subsystem Device ID Number */
+#define PXSIASVI_DEVID_MASK	(0xffff << PXSIASVI_DEVID_OFFS)
+
+
+/* PCI Express Capability List Pointer Register*/
+/*PEX_CAPABILTY_LIST_POINTER (PXCLP)*/
+
+#define PXCLP_CAPPTR_OFFS	0		/* Capability List Pointer */
+#define PXCLP_CAPPTR_MASK	(0xff << PXCLP_CAPPTR_OFFS)
+
+/* PCI Express Interrupt Pin and Line Register */
+/*PEX_INTERRUPT_PIN_AND_LINE (PXIPAL)*/
+
+#define PXIPAL_INTLINE_OFFS	0	/* Interrupt line (IRQ) */
+#define PXIPAL_INTLINE_MASK	(0xff << PXIPAL_INTLINE_OFFS)
+
+#define PXIPAL_INTPIN_OFFS	8	/* interrupt pin (A,B,C,D) */
+#define PXIPAL_INTPIN_MASK	(0xff << PXIPAL_INTPIN_OFFS)
+
+
+/* PCI Express Power Management Capability Header Register*/
+/*PEX_POWER_MNG_CAPABILITY (PXPMC)*/
+
+#define PXPMC_CAP_ID_OFFS		0 /* Capability ID */
+#define PXPMC_CAP_ID_MASK		(0xff << PXPMC_CAP_ID_OFFS)
+
+#define PXPMC_NEXT_PTR_OFFS		8 /* Next Item Pointer */
+#define PXPMC_NEXT_PTR_MASK		(0xff << PXPMC_NEXT_PTR_OFFS)
+
+#define PXPMC_PMC_VER_OFFS		16 /* PCI Power Management Capability Version*/
+#define PXPMC_PMC_VER_MASK		(0x7 << PXPMC_PMC_VER_OFFS)
+
+#define PXPMC_DSI 				BIT21/* Device Specific Initialization */
+
+#define PXPMC_AUX_CUR_OFFS		22 /* Auxiliary Current Requirements */
+#define PXPMC_AUX_CUR_MASK		(0x7 << PXPMC_AUX_CUR_OFFS)
+
+#define PXPMC_D1_SUP 			BIT25 /* D1 Power Management support*/
+
+#define PXPMC_D2_SUP 			BIT26 /* D2 Power Management support*/
+
+#define PXPMC_PME_SUP_OFFS		27 /* PM Event generation support*/
+#define PXPMC_PME_SUP_MASK		(0x1f << PXPMC_PME_SUP_OFFS)
+
+/* PCI Express Power Management Control and Status Register*/
+/*PEX_POWER_MNG_STATUS_CONTROL (PXPMSC)*/
+
+#define PXPMSC_PM_STATE_OFFS	0	/* Power State */
+#define PXPMSC_PM_STATE_MASK	(0x3 << PXPMSC_PM_STATE_OFFS)
+#define PXPMSC_PM_STATE_D0		(0x0 << PXPMSC_PM_STATE_OFFS)
+#define PXPMSC_PM_STATE_D1		(0x1 << PXPMSC_PM_STATE_OFFS)
+#define PXPMSC_PM_STATE_D2		(0x2 << PXPMSC_PM_STATE_OFFS)
+#define PXPMSC_PM_STATE_D3		(0x3 << PXPMSC_PM_STATE_OFFS)
+
+#define PXPMSC_PME_EN			BIT8/* PM_PME Message Generation Enable */
+
+#define PXPMSC_PM_DATA_SEL_OFFS	9	/* Data Select*/
+#define PXPMSC_PM_DATA_SEL_MASK	(0xf << PXPMSC_PM_DATA_SEL_OFFS)
+
+#define PXPMSC_PM_DATA_SCALE_OFFS	13	/* Data Scale */
+#define PXPMSC_PM_DATA_SCALE_MASK	(0x3 << PXPMSC_PM_DATA_SCALE_OFFS)
+
+#define PXPMSC_PME_STAT				BIT15/* PME Status */
+
+#define PXPMSC_PM_DATA_OFFS			24		/* State Data */
+#define PXPMSC_PM_DATA_MASK			(0xff << PXPMSC_PM_DATA_OFFS)
+
+
+/* PCI Express MSI Message Control Register*/								 
+/*PEX_MSI_MESSAGE_CONTROL (PXMMC)*/
+
+#define PXMMC_CAP_ID_OFFS			0 /* Capability ID */
+#define PXMMC_CAP_ID_MASK			(0xff << PXMMC_CAP_ID_OFFS)
+
+#define PXMMC_NEXT_PTR_OFFS			8 /* Next Item Pointer */
+#define PXMMC_NEXT_PTR_MASK			(0xff << PXMMC_NEXT_PTR_OFFS)
+
+#define PXMMC_MSI_EN				BIT18 /* MSI Enable */
+
+#define PXMMC_MULTI_CAP_OFFS		17 /* Multiple Message Capable */
+#define PXMMC_MULTI_CAP_MASK		(0x7 << PXMMC_MULTI_CAP_OFFS)
+
+#define PXMMC_MULTI_EN_OFFS			20  /* Multiple Messages Enable */
+#define PXMMC_MULTI_EN_MASK			(0x7 << PXMMC_MULTI_EN_OFFS)
+
+#define PXMMC_ADDR64				BIT23	/* 64-bit Addressing Capable */
+
+
+/* PCI Express MSI Message Address Register*/
+/*PEX_MSI_MESSAGE_ADDR (PXMMA)*/
+
+#define PXMMA_MSI_ADDR_OFFS			2 /* Message Address  corresponds to 
+										Address[31:2] of the MSI MWr TLP*/
+#define PXMMA_MSI_ADDR_MASK			(0x3fffffff << PXMMA_MSI_ADDR_OFFS)
+
+
+/* PCI Express MSI Message Address (High) Register */
+/*PEX_MSI_MESSAGE_HIGH_ADDR (PXMMHA)*/
+
+#define PXMMA_MSI_ADDR_H_OFFS		0 /* Message Upper Address corresponds to 
+											Address[63:32] of the MSI MWr TLP*/
+#define PXMMA_MSI_ADDR_H_MASK		(0xffffffff << PXMMA_MSI_ADDR_H_OFFS )
+
+
+/* PCI Express MSI Message Data Register*/
+/*PEX_MSI_MESSAGE_DATA (PXMMD)*/
+
+#define PXMMD_MSI_DATA_OFFS 		0 /* Message Data */
+#define PXMMD_MSI_DATA_MASK 		(0xffff << PXMMD_MSI_DATA_OFFS )
+
+
+/* PCI Express Capability Register*/								 
+/*PEX_CAPABILITY_REG (PXCR)*/
+
+#define PXCR_CAP_ID_OFFS			0	/* Capability ID*/
+#define PXCR_CAP_ID_MASK			(0xff << PXCR_CAP_ID_OFFS)
+
+#define PXCR_NEXT_PTR_OFFS			8 /* Next Item Pointer*/
+#define PXCR_NEXT_PTR_MASK			(0xff << PXCR_NEXT_PTR_OFFS)
+
+#define PXCR_CAP_VER_OFFS			16 /* Capability Version*/
+#define PXCR_CAP_VER_MASK			(0xf << PXCR_CAP_VER_OFFS)
+
+#define PXCR_DEV_TYPE_OFFS			20 /*  Device/Port Type*/
+#define PXCR_DEV_TYPE_MASK			(0xf << PXCR_DEV_TYPE_OFFS)
+
+#define PXCR_SLOT_IMP 				BIT24 /* Slot Implemented*/
+
+#define PXCR_INT_MSG_NUM_OFFS		25 /* Interrupt Message Number*/
+#define PXCR_INT_MSG_NUM_MASK		(0x1f << PXCR_INT_MSG_NUM_OFFS)
+
+
+/* PCI Express Device Capabilities Register */
+/*PEX_DEV_CAPABILITY_REG (PXDCR)*/
+
+#define PXDCR_MAX_PLD_SIZE_SUP_OFFS			0 /* Maximum Payload Size Supported*/
+#define PXDCR_MAX_PLD_SIZE_SUP_MASK			(0x7 << PXDCR_MAX_PLD_SIZE_SUP_OFFS)
+
+#define PXDCR_EP_L0S_ACC_LAT_OFFS			6/* Endpoint L0s Acceptable Latency*/
+#define PXDCR_EP_L0S_ACC_LAT_MASK			(0x7 << PXDCR_EP_L0S_ACC_LAT_OFFS)
+#define PXDCR_EP_L0S_ACC_LAT_64NS_LESS		(0x0 << PXDCR_EP_L0S_ACC_LAT_OFFS)
+#define PXDCR_EP_L0S_ACC_LAT_64NS_128NS		(0x1 << PXDCR_EP_L0S_ACC_LAT_OFFS)
+#define PXDCR_EP_L0S_ACC_LAT_128NS_256NS	(0x2 << PXDCR_EP_L0S_ACC_LAT_OFFS)
+#define PXDCR_EP_L0S_ACC_LAT_256NS_512NS	(0x3 << PXDCR_EP_L0S_ACC_LAT_OFFS)
+#define PXDCR_EP_L0S_ACC_LAT_512NS_1US		(0x4 << PXDCR_EP_L0S_ACC_LAT_OFFS)
+#define PXDCR_EP_L0S_ACC_LAT_1US_2US		(0x5 << PXDCR_EP_L0S_ACC_LAT_OFFS)
+#define PXDCR_EP_L0S_ACC_LAT_2US_4US		(0x6 << PXDCR_EP_L0S_ACC_LAT_OFFS)
+#define PXDCR_EP_L0S_ACC_LAT_4US_MORE		(0x7 << PXDCR_EP_L0S_ACC_LAT_OFFS)
+
+#define PXDCR_EP_L1_ACC_LAT_OFFS 			9 /* Endpoint L1 Acceptable Latency*/
+#define PXDCR_EP_L1_ACC_LAT_MASK			(0x7 << PXDCR_EP_L1_ACC_LAT_OFFS)
+#define PXDCR_EP_L1_ACC_LAT_64NS_LESS       (0x0 << PXDCR_EP_L1_ACC_LAT_OFFS) 
+#define PXDCR_EP_L1_ACC_LAT_64NS_128NS      (0x1 << PXDCR_EP_L1_ACC_LAT_OFFS) 
+#define PXDCR_EP_L1_ACC_LAT_128NS_256NS     (0x2 << PXDCR_EP_L1_ACC_LAT_OFFS) 
+#define PXDCR_EP_L1_ACC_LAT_256NS_512NS     (0x3 << PXDCR_EP_L1_ACC_LAT_OFFS) 
+#define PXDCR_EP_L1_ACC_LAT_512NS_1US       (0x4 << PXDCR_EP_L1_ACC_LAT_OFFS) 
+#define PXDCR_EP_L1_ACC_LAT_1US_2US         (0x5 << PXDCR_EP_L1_ACC_LAT_OFFS) 
+#define PXDCR_EP_L1_ACC_LAT_2US_4US         (0x6 << PXDCR_EP_L1_ACC_LAT_OFFS) 
+#define PXDCR_EP_L1_ACC_LAT_4US_MORE        (0x7 << PXDCR_EP_L1_ACC_LAT_OFFS) 
+
+
+#define PXDCR_ATT_BUT_PRS_OFFS				12 /* Attention Button Present*/
+#define PXDCR_ATT_BUT_PRS_MASK				BIT12
+#define PXDCR_ATT_BUT_PRS_IMPLEMENTED		BIT12
+
+#define PXDCR_ATT_IND_PRS_OFFS				13 /* Attention Indicator Present*/
+#define PXDCR_ATT_IND_PRS_MASK				BIT13
+#define PXDCR_ATT_IND_PRS_IMPLEMENTED		BIT13
+
+#define PXDCR_PWR_IND_PRS_OFFS        		14/* Power Indicator Present*/
+#define PXDCR_PWR_IND_PRS_MASK       		BIT14
+#define PXDCR_PWR_IND_PRS_IMPLEMENTED		BIT14
+
+#define PXDCR_CAP_SPL_VAL_OFFS				18 /*Captured Slot Power Limit 
+												 Value*/
+#define PXDCR_CAP_SPL_VAL_MASK				(0xff << PXDCR_CAP_SPL_VAL_OFFS)
+
+#define PXDCR_CAP_SP_LSCL_OFFS				26 /* Captured Slot Power Limit
+												  Scale */
+#define PXDCR_CAP_SP_LSCL_MASK				(0x3 << PXDCR_CAP_SP_LSCL_OFFS)
+
+/* PCI Express Device Control Status Register */
+/*PEX_DEV_CTRL_STAT_REG (PXDCSR)*/
+
+#define PXDCSR_COR_ERR_REP_EN		BIT0 /* Correctable Error Reporting Enable*/
+#define PXDCSR_NF_ERR_REP_EN		BIT1 /* Non-Fatal Error Reporting Enable*/
+#define PXDCSR_F_ERR_REP_EN			BIT2 /* Fatal Error Reporting Enable*/
+#define PXDCSR_UR_REP_EN			BIT3 /* Unsupported Request (UR) 
+													Reporting Enable*/
+#define PXDCSR_EN_RO 				BIT4 /* Enable Relaxed Ordering*/
+
+#define PXDCSR_MAX_PLD_SZ_OFFS		5	 /* Maximum Payload Size*/
+#define PXDCSR_MAX_PLD_SZ_MASK		(0x7 << PXDCSR_MAX_PLD_SZ_OFFS)
+#define PXDCSR_MAX_PLD_SZ_128B		(0x0 << PXDCSR_MAX_PLD_SZ_OFFS)
+#define PXDCSR_EN_NS				BIT11  /* Enable No Snoop*/
+
+#define PXDCSR_MAX_RD_RQ_SZ_OFFS	12 /* Maximum Read Request Size*/
+#define PXDCSR_MAX_RD_RQ_SZ_MASK	(0x7 << PXDCSR_MAX_RD_RQ_SZ_OFFS)
+#define PXDCSR_MAX_RD_RQ_SZ_128B	(0x0 << PXDCSR_MAX_RD_RQ_SZ_OFFS)
+#define PXDCSR_MAX_RD_RQ_SZ_256B	(0x1 << PXDCSR_MAX_RD_RQ_SZ_OFFS)
+#define PXDCSR_MAX_RD_RQ_SZ_512B	(0x2 << PXDCSR_MAX_RD_RQ_SZ_OFFS)
+#define PXDCSR_MAX_RD_RQ_SZ_1KB		(0x3 << PXDCSR_MAX_RD_RQ_SZ_OFFS)
+#define PXDCSR_MAX_RD_RQ_SZ_2KB		(0x4 << PXDCSR_MAX_RD_RQ_SZ_OFFS)
+#define PXDCSR_MAX_RD_RQ_SZ_4KB		(0x5 << PXDCSR_MAX_RD_RQ_SZ_OFFS)
+
+#define PXDCSR_COR_ERR_DET 			BIT16 /* Correctable Error Detected*/
+#define PXDCSR_NF_ERR_DET 			BIT17 /* Non-Fatal Error Detected.*/
+#define PXDCSR_F_ERR_DET 			BIT18 /* Fatal Error Detected.*/
+#define PXDCSR_UR_DET				BIT19 /* Unsupported Request Detected */
+#define PXDCSR_AUX_PWR_DET 			BIT20 /* Reserved*/
+
+#define PXDCSR_TRANS_PEND_OFFS 			21 /* Transactions Pending*/
+#define PXDCSR_TRANS_PEND_MASK 			BIT21
+#define PXDCSR_TRANS_PEND_NOT_COMPLETED (0x1 << PXDCSR_TRANS_PEND_OFFS)
+
+
+/* PCI Express Link Capabilities Register*/
+/*PEX_LINK_CAPABILITY_REG (PXLCR)*/
+
+#define PXLCR_MAX_LINK_SPD_OFFS		0 /* Maximum Link Speed*/
+#define PXLCR_MAX_LINK_SPD_MASK		(0xf << PXLCR_MAX_LINK_SPD_OFFS)
+
+#define PXLCR_MAX_LNK_WDTH_OFFS 	3 /* Maximum Link Width*/
+#define PXLCR_MAX_LNK_WDTH_MASK		(0x3f << PXLCR_MAX_LNK_WDTH_OFFS)
+
+#define PXLCR_ASPM_SUP_OFFS 		10 /* Active State Link PM Support*/
+#define PXLCR_ASPM_SUP_MASK			(0x3 << PXLCR_ASPM_SUP_OFFS)
+
+#define PXLCR_L0S_EXT_LAT_OFFS 			12 /* L0s Exit Latency*/
+#define PXLCR_L0S_EXT_LAT_MASK			(0x7 << PXLCR_L0S_EXT_LAT_OFFS)
+#define PXLCR_L0S_EXT_LAT_64NS_LESS     (0x0 << PXDCR_EP_L1_ACC_LAT_OFFS)  
+#define PXLCR_L0S_EXT_LAT_64NS_128NS   	(0x1 << PXDCR_EP_L1_ACC_LAT_OFFS)  
+#define PXLCR_L0S_EXT_LAT_128NS_256NS   (0x2 << PXDCR_EP_L1_ACC_LAT_OFFS)  
+#define PXLCR_L0S_EXT_LAT_256NS_512NS   (0x3 << PXDCR_EP_L1_ACC_LAT_OFFS)  
+#define PXLCR_L0S_EXT_LAT_512NS_1US     (0x4 << PXDCR_EP_L1_ACC_LAT_OFFS)  
+#define PXLCR_L0S_EXT_LAT_1US_2US       (0x5 << PXDCR_EP_L1_ACC_LAT_OFFS)  
+#define PXLCR_L0S_EXT_LAT_2US_4US       (0x6 << PXDCR_EP_L1_ACC_LAT_OFFS)  
+
+#define PXLCR_POR_TNUM_OFFS 			24 /* Port Number */
+#define PXLCR_POR_TNUM_MASK				(0xff << PXLCR_POR_TNUM_OFFS)
+
+/* PCI Express Link Control Status Register */
+/*PEX_LINK_CTRL_STAT_REG (PXLCSR)*/
+
+#define PXLCSR_ASPM_CNT_OFFS			0 /* Active State Link PM Control */
+#define PXLCSR_ASPM_CNT_MASK			(0x3 << PXLCSR_ASPM_CNT_OFFS)
+#define PXLCSR_ASPM_CNT_DISABLED		(0x0 << PXLCSR_ASPM_CNT_OFFS)
+#define PXLCSR_ASPM_CNT_L0S_ENT_SUPP		(0x1 << PXLCSR_ASPM_CNT_OFFS)
+#define PXLCSR_ASPM_CNT_L1S_ENT_SUPP		(0x2 << PXLCSR_ASPM_CNT_OFFS)
+#define PXLCSR_ASPM_CNT_L0S_L1S_ENT_SUPP	(0x3 << PXLCSR_ASPM_CNT_OFFS)
+
+#define PXLCSR_RCB_OFFS				3 /* Read Completion Boundary */
+#define PXLCSR_RCB_MASK				BIT3
+#define PXLCSR_RCB_64B				(0 << PXLCSR_RCB_OFFS)
+#define PXLCSR_RCB_128B				(1 << PXLCSR_RCB_OFFS)
+
+#define PXLCSR_LNK_DIS 				BIT4 /* Link Disable */
+#define PXLCSR_RETRN_LNK 			BIT5 /* Retrain Link */
+#define PXLCSR_CMN_CLK_CFG			BIT6 /* Common Clock Configuration */
+#define PXLCSR_EXTD_SNC 			BIT7 /* Extended Sync */
+
+#define PXLCSR_LNK_SPD_OFFS 		16 /* Link Speed */
+#define PXLCSR_LNK_SPD_MASK			(0xf << PXLCSR_LNK_SPD_OFFS)
+
+#define PXLCSR_NEG_LNK_WDTH_OFFS	20  /* Negotiated Link Width */
+#define PXLCSR_NEG_LNK_WDTH_MASK 	(0x3f << PXLCSR_NEG_LNK_WDTH_OFFS)
+#define PXLCSR_NEG_LNK_WDTH_X1		(0x1 << PXLCSR_NEG_LNK_WDTH_OFFS)
+
+#define PXLCSR_LNK_TRN 				BIT27 /* Link Training */
+
+#define PXLCSR_SLT_CLK_CFG_OFFS		28 /* Slot Clock Configuration */
+#define PXLCSR_SLT_CLK_CFG_MASK		BIT28
+#define PXLCSR_SLT_CLK_CFG_INDPNT	(0x0 << PXLCSR_SLT_CLK_CFG_OFFS)
+#define PXLCSR_SLT_CLK_CFG_REF		(0x1 << PXLCSR_SLT_CLK_CFG_OFFS)
+								
+/* PCI Express Advanced Error Report Header Register */								 
+/*PEX_ADV_ERR_RPRT_HDR_TRGT_REG (PXAERHTR)*/
+
+/* PCI Express Uncorrectable Error Status Register*/
+/*PEX_UNCORRECT_ERR_STAT_REG (PXUESR)*/
+
+/* PCI Express Uncorrectable Error Mask Register */
+/*PEX_UNCORRECT_ERR_MASK_REG (PXUEMR)*/
+
+/* PCI Express Uncorrectable Error Severity Register */
+/*PEX_UNCORRECT_ERR_SERVITY_REG (PXUESR)*/
+
+/* PCI Express Correctable Error Status Register */
+/*PEX_CORRECT_ERR_STAT_REG (PXCESR)*/
+
+/* PCI Express Correctable Error Mask Register */
+/*PEX_CORRECT_ERR_MASK_REG (PXCEMR)*/
+
+/* PCI Express Advanced Error Capability and Control Register*/
+/*PEX_ADV_ERR_CAPABILITY_CTRL_REG (PXAECCR)*/
+
+/* PCI Express Header Log First DWORD Register*/
+/*PEX_HDR_LOG_FIRST_DWORD_REG (PXHLFDR)*/
+
+/* PCI Express Header Log Second DWORD Register*/
+/*PEX_HDR_LOG_SECOND_DWORD_REG (PXHLSDR)*/
+
+/* PCI Express Header Log Third DWORD Register*/
+/*PEX_HDR_LOG_THIRD_DWORD_REG (PXHLTDR)*/
+
+/* PCI Express Header Log Fourth DWORD Register*/
+/*PEX_HDR_LOG_FOURTH_DWORD_REG (PXHLFDR)*/
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* #ifndef __INCPEXREGSH */
+
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvVrtBrgPex.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvVrtBrgPex.c
new file mode 100644
index 0000000000..13d2f87261
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvVrtBrgPex.c
@@ -0,0 +1,313 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "mvPex.h"
+
+//#define MV_DEBUG
+/* defines  */       
+#ifdef MV_DEBUG         
+	#define DB(x)	x
+#else                
+	#define DB(x)    
+#endif	             
+
+/* locals */         
+typedef struct
+{
+	MV_U32 data;
+	MV_U32 mask;
+}PEX_HEADER_DATA;
+
+/* local function forwad decleration */
+MV_U32 mvPexHwConfigRead (MV_U32 pexIf, MV_U32 bus, MV_U32 dev, MV_U32 func, 
+                        MV_U32 regOff);
+MV_STATUS mvPexHwConfigWrite(MV_U32 pexIf, MV_U32 bus, MV_U32 dev, 
+                           MV_U32 func, MV_U32 regOff, MV_U32 data);
+void resetPexConfig(MV_U32 pexIf, MV_U32 bus, MV_U32 dev);
+
+
+PEX_HEADER_DATA configHdr[16] = 
+{
+{0x888811ab, 0x00000000}, /*[device ID, vendor ID] */
+{0x00100007, 0x0000ffff}, /*[status register, command register] */  
+{0x0604000e, 0x00000000}, /*[programming interface, sub class code, class code, revision ID] */
+{0x00010008, 0x00000000},  /*[BIST, header type, latency time, cache line] */
+{0x00000000, 0x00000000},  /*[base address 0] */             
+{0x00000000, 0x00000000},  /*[base address 1] */             
+{0x00000000, 0x00ffffff},  /*[secondary latency timersubordinate bus number, secondary bus number, primary bus number] */         
+{0x0000f101, 0x00000000},  /*[secondary status ,IO limit, IO base] */
+{0x9ff0a000, 0x00000000},  /*[memory limit, memory base] */                
+{0x0001fff1, 0x00000000},  /*[prefetch memory limit, prefetch memory base] */       
+{0xffffffff, 0x00000000},  /*[prefetch memory base upper] */ 
+{0x00000000, 0x00000000},  /*[prefetch memory limit upper] */
+{0xeffff000, 0x00000000},  /*[IO limit upper 16 bits, IO base upper 16 bits] */      
+{0x00000000, 0x00000000},  /*[reserved, capability pointer] */ 
+{0x00000000, 0x00000000},  /*[expansion ROM base address] */ 
+{0x00000000, 0x000000FF},  /*[bridge control, interrupt pin, interrupt line] */             
+};
+
+
+#define HEADER_WRITE(data, offset) configHdr[offset/4].data = ((configHdr[offset/4].data & ~configHdr[offset/4].mask) | \
+																(data & configHdr[offset/4].mask))
+#define HEADER_READ(offset) configHdr[offset/4].data
+
+/*******************************************************************************
+* mvVrtBrgPexInit - Initialize PEX interfaces
+*
+* DESCRIPTION:
+*
+* This function is responsible of intialization of the Pex Interface , It 
+* configure the Pex Bars and Windows in the following manner:
+*
+*  Assumptions : 
+*				Bar0 is always internal registers bar
+*			    Bar1 is always the DRAM bar
+*				Bar2 is always the Device bar
+*
+*  1) Sets the Internal registers bar base by obtaining the base from
+*	  the CPU Interface
+*  2) Sets the DRAM bar base and size by getting the base and size from
+*     the CPU Interface when the size is the sum of all enabled DRAM 
+*	  chip selects and the base is the base of CS0 .
+*  3) Sets the Device bar base and size by getting these values from the 
+*     CPU Interface when the base is the base of the lowest base of the
+*     Device chip selects, and the 
+*
+*
+* INPUT:
+*
+*       pexIf   -  PEX interface number.
+*
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_OK if function success otherwise MV_ERROR or MV_BAD_PARAM
+*
+*******************************************************************************/
+MV_STATUS mvPexVrtBrgInit(MV_U32 pexIf)
+{
+	/* reset PEX tree to recover previous U-boot/Boot configurations */
+	MV_U32 localBus = mvPexLocalBusNumGet(pexIf);
+
+
+	resetPexConfig(pexIf, localBus, 1);
+	return MV_OK;
+}
+
+
+MV_U32 mvPexVrtBrgConfigRead (MV_U32 pexIf, MV_U32 bus, MV_U32 dev, MV_U32 func, 
+                        MV_U32 regOff)
+{
+	
+	MV_U32 localBus = mvPexLocalBusNumGet(pexIf);
+	MV_U32 localDev = mvPexLocalDevNumGet(pexIf);
+	MV_U32 val;  
+	if(bus == localBus)
+	{
+		if(dev > 1)
+		{
+/* on the local device allow only device #0 & #1 */
+			return 0xffffffff;
+		}
+		else
+		if (dev == localDev)
+		{
+			/* read the memory controller registers */
+			return mvPexHwConfigRead (pexIf, bus, dev, func, regOff);
+		}
+		else
+		{
+			/* access the virtual brg header */
+			return HEADER_READ(regOff);
+		}
+	}
+	else
+	if(bus == (localBus + 1))
+	{
+		/* access the device behind the virtual bridge */
+		if((dev == localDev) || (dev > 1))
+		{
+			return 0xffffffff;
+		}
+		else
+		{
+			/* access the device behind the virtual bridge, in this case 
+			*  change the bus number to the local bus number in order to 
+			*  generate type 0 config cycle
+			*/			
+			mvPexLocalBusNumSet(pexIf, bus);
+			mvPexLocalDevNumSet(pexIf, 1);
+			val = mvPexHwConfigRead (pexIf, bus, 0, func, regOff);
+			mvPexLocalBusNumSet(pexIf, localBus);
+			mvPexLocalDevNumSet(pexIf, localDev);
+			return val;
+		}
+	}
+	/* for all other devices use the HW function to get the 
+	*  requested registers
+	*/
+	mvPexLocalDevNumSet(pexIf, 1);
+	val = mvPexHwConfigRead (pexIf, bus, dev, func, regOff);
+	mvPexLocalDevNumSet(pexIf, localDev);	
+	return val;
+}
+
+
+MV_STATUS mvPexVrtBrgConfigWrite(MV_U32 pexIf, MV_U32 bus, MV_U32 dev, 
+                           MV_U32 func, MV_U32 regOff, MV_U32 data)
+{
+	MV_U32 localBus = mvPexLocalBusNumGet(pexIf);
+	MV_U32 localDev = mvPexLocalDevNumGet(pexIf);
+	MV_STATUS	status;
+
+	if(bus == localBus)
+	{
+		if(dev > 1)
+		{
+			/* on the local device allow only device #0 & #1 */
+			return MV_ERROR;
+		}
+		else
+		if (dev == localDev)
+		{
+			/* read the memory controller registers */
+			return mvPexHwConfigWrite (pexIf, bus, dev, func, regOff, data);			
+		}
+		else
+		{
+			/* access the virtual brg header */
+			HEADER_WRITE(data, regOff);
+			return MV_OK;
+		}
+	}
+	else
+	if(bus == (localBus + 1))
+	{
+		/* access the device behind the virtual bridge */
+		if((dev == localDev) || (dev > 1))
+		{
+			return MV_ERROR;
+		}
+		else
+		{
+			/* access the device behind the virtual bridge, in this case 
+			*  change the bus number to the local bus number in order to 
+			*  generate type 0 config cycle
+			*/
+			//return mvPexHwConfigWrite (pexIf, localBus, dev, func, regOff, data);
+			mvPexLocalBusNumSet(pexIf, bus);
+			mvPexLocalDevNumSet(pexIf, 1);
+			status = mvPexHwConfigWrite (pexIf, bus, 0, func, regOff, data);
+			mvPexLocalBusNumSet(pexIf, localBus);
+			mvPexLocalDevNumSet(pexIf, localDev);
+			return status;
+
+		}
+	}
+	/* for all other devices use the HW function to get the 
+	*  requested registers
+	*/
+	mvPexLocalDevNumSet(pexIf, 1);
+	status = mvPexHwConfigWrite (pexIf, bus, dev, func, regOff, data);
+	mvPexLocalDevNumSet(pexIf, localDev);
+	return status;
+}
+
+
+
+
+void resetPexConfig(MV_U32 pexIf, MV_U32 bus, MV_U32 dev)
+{
+	MV_U32 tData;
+	MV_U32 i;
+
+	/* restore the PEX configuration to initialization state */
+	/* in case PEX P2P call recursive and reset config */
+	tData = mvPexHwConfigRead (pexIf, bus, dev, 0x0, 0x0);
+	if(tData != 0xffffffff)
+	{
+		/* agent had been found - check whether P2P */
+		tData = mvPexHwConfigRead (pexIf, bus, dev, 0x0, 0x8);
+		if((tData & 0xffff0000) == 0x06040000)
+		{/* P2P */
+			/* get the sec bus and the subordinate */
+			MV_U32 secBus;	
+			tData = mvPexHwConfigRead (pexIf, bus, dev, 0x0, 0x18);
+			secBus = ((tData >> 8) & 0xff);
+			/* now scan on sec bus */
+			for(i = 0;i < 0xff;i++)
+			{
+				resetPexConfig(pexIf, secBus, i);
+			}
+			/* now reset this device */
+			DB(mvOsPrintf("Reset bus %d dev %d\n", bus, dev));
+			mvPexHwConfigWrite(pexIf, bus, dev, 0x0, 0x18, 0x0); 
+			DB(mvOsPrintf("Reset bus %d dev %d\n", bus, dev));
+		}
+	}
+}
+
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvVrtBrgPex.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvVrtBrgPex.h
new file mode 100644
index 0000000000..d01f0248ad
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvVrtBrgPex.h
@@ -0,0 +1,82 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCVRTBRGPEXH
+#define __INCVRTBRGPEXH
+
+
+/* Global Functions prototypes */
+/* mvPexInit - Initialize PEX interfaces*/
+MV_STATUS mvPexVrtBrgInit(MV_U32 pexIf);
+
+/* mvPexConfigRead - Read from configuration space */
+MV_U32 mvPexVrtBrgConfigRead (MV_U32 pexIf, MV_U32 bus, MV_U32 dev,
+						MV_U32 func,MV_U32 regOff);
+
+/* mvPexConfigWrite - Write to configuration space */
+MV_STATUS mvPexVrtBrgConfigWrite(MV_U32 pexIf, MV_U32 bus, MV_U32 dev,
+                           MV_U32 func, MV_U32 regOff, MV_U32 data);
+
+
+#endif /* #ifndef __INCPEXH */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlash.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlash.c
new file mode 100644
index 0000000000..6c5bc191cc
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlash.c
@@ -0,0 +1,1522 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED.  The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer.
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    *   Neither the name of Marvell nor the names of its contributors may be
+        used to endorse or promote products derived from this software without
+        specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+#include "mvOs.h"
+#include "sflash/mvSFlash.h"
+#include "sflash/mvSFlashSpec.h"
+#include "spi/mvSpi.h"
+#include "spi/mvSpiCmnd.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+
+/*#define MV_DEBUG*/
+#ifdef MV_DEBUG
+#define DB(x) x
+#else
+#define DB(x)
+#endif
+
+/* Globals */
+static MV_SFLASH_DEVICE_PARAMS sflash[] = {
+    /* ST M25P32 SPI flash, 4MB, 64 sectors of 64K each */
+    {
+     MV_M25P_WREN_CMND_OPCD,
+     MV_M25P_WRDI_CMND_OPCD,
+     MV_M25P_RDID_CMND_OPCD,
+     MV_M25P_RDSR_CMND_OPCD,
+     MV_M25P_WRSR_CMND_OPCD,
+     MV_M25P_READ_CMND_OPCD,
+     MV_M25P_FAST_RD_CMND_OPCD,
+     MV_M25P_PP_CMND_OPCD,
+     MV_M25P_SE_CMND_OPCD,
+     MV_M25P_BE_CMND_OPCD,
+     MV_M25P_RES_CMND_OPCD,
+     MV_SFLASH_NO_SPECIFIC_OPCD,    /* power save not supported */
+     MV_M25P32_SECTOR_SIZE,
+     MV_M25P32_SECTOR_NUMBER,
+     MV_M25P_PAGE_SIZE,
+     "ST M25P32",
+     MV_M25PXXX_ST_MANF_ID,
+     MV_M25P32_DEVICE_ID,
+     MV_M25P32_MAX_SPI_FREQ,
+     MV_M25P32_MAX_FAST_SPI_FREQ,
+     MV_M25P32_FAST_READ_DUMMY_BYTES
+    },
+    /* ST M25P64 SPI flash, 8MB, 128 sectors of 64K each */
+    {
+     MV_M25P_WREN_CMND_OPCD,
+     MV_M25P_WRDI_CMND_OPCD,
+     MV_M25P_RDID_CMND_OPCD,
+     MV_M25P_RDSR_CMND_OPCD,
+     MV_M25P_WRSR_CMND_OPCD,
+     MV_M25P_READ_CMND_OPCD,
+     MV_M25P_FAST_RD_CMND_OPCD,
+     MV_M25P_PP_CMND_OPCD,
+     MV_M25P_SE_CMND_OPCD,
+     MV_M25P_BE_CMND_OPCD,
+     MV_M25P_RES_CMND_OPCD,
+     MV_SFLASH_NO_SPECIFIC_OPCD,    /* power save not supported */
+     MV_M25P64_SECTOR_SIZE,
+     MV_M25P64_SECTOR_NUMBER,
+     MV_M25P_PAGE_SIZE,
+     "ST M25P64",
+     MV_M25PXXX_ST_MANF_ID,
+     MV_M25P64_DEVICE_ID,
+     MV_M25P64_MAX_SPI_FREQ,
+     MV_M25P64_MAX_FAST_SPI_FREQ,
+     MV_M25P64_FAST_READ_DUMMY_BYTES
+    },
+    /* ST M25P128 SPI flash, 16MB, 64 sectors of 256K each */
+    {
+     MV_M25P_WREN_CMND_OPCD,
+     MV_M25P_WRDI_CMND_OPCD,
+     MV_M25P_RDID_CMND_OPCD,
+     MV_M25P_RDSR_CMND_OPCD,
+     MV_M25P_WRSR_CMND_OPCD,
+     MV_M25P_READ_CMND_OPCD,
+     MV_M25P_FAST_RD_CMND_OPCD,
+     MV_M25P_PP_CMND_OPCD,
+     MV_M25P_SE_CMND_OPCD,
+     MV_M25P_BE_CMND_OPCD,
+     MV_M25P_RES_CMND_OPCD,
+     MV_SFLASH_NO_SPECIFIC_OPCD,    /* power save not supported */
+     MV_M25P128_SECTOR_SIZE,
+     MV_M25P128_SECTOR_NUMBER,
+     MV_M25P_PAGE_SIZE,
+     "ST M25P128",
+     MV_M25PXXX_ST_MANF_ID,
+     MV_M25P128_DEVICE_ID,
+     MV_M25P128_MAX_SPI_FREQ,
+     MV_M25P128_MAX_FAST_SPI_FREQ,
+     MV_M25P128_FAST_READ_DUMMY_BYTES
+    },
+    /* Macronix MXIC MX25L6405 SPI flash, 8MB, 128 sectors of 64K each */
+    {
+     MV_MX25L_WREN_CMND_OPCD,
+     MV_MX25L_WRDI_CMND_OPCD,
+     MV_MX25L_RDID_CMND_OPCD,
+     MV_MX25L_RDSR_CMND_OPCD,
+     MV_MX25L_WRSR_CMND_OPCD,
+     MV_MX25L_READ_CMND_OPCD,
+     MV_MX25L_FAST_RD_CMND_OPCD,
+     MV_MX25L_PP_CMND_OPCD,
+     MV_MX25L_SE_CMND_OPCD,
+     MV_MX25L_BE_CMND_OPCD,
+     MV_MX25L_RES_CMND_OPCD,
+     MV_MX25L_DP_CMND_OPCD,
+     MV_MX25L6405_SECTOR_SIZE,
+     MV_MX25L6405_SECTOR_NUMBER,
+     MV_MXIC_PAGE_SIZE,
+     "MXIC MX25L6405",
+     MV_MXIC_MANF_ID,
+     MV_MX25L6405_DEVICE_ID,
+     MV_MX25L6405_MAX_SPI_FREQ,
+     MV_MX25L6405_MAX_FAST_SPI_FREQ,
+     MV_MX25L6405_FAST_READ_DUMMY_BYTES
+    },
+    /* SPANSION S25FL128P SPI flash, 16MB, 64 sectors of 256K each */
+    {
+     MV_S25FL_WREN_CMND_OPCD,
+     MV_S25FL_WRDI_CMND_OPCD,
+     MV_S25FL_RDID_CMND_OPCD,
+     MV_S25FL_RDSR_CMND_OPCD,
+     MV_S25FL_WRSR_CMND_OPCD,
+     MV_S25FL_READ_CMND_OPCD,
+     MV_S25FL_FAST_RD_CMND_OPCD,
+     MV_S25FL_PP_CMND_OPCD,
+     MV_S25FL_SE_CMND_OPCD,
+     MV_S25FL_BE_CMND_OPCD,
+     MV_S25FL_RES_CMND_OPCD,
+     MV_S25FL_DP_CMND_OPCD,
+     MV_S25FL128_SECTOR_SIZE,
+     MV_S25FL128_SECTOR_NUMBER,
+     MV_S25FL_PAGE_SIZE,
+     "SPANSION S25FL128",
+     MV_SPANSION_MANF_ID,
+     MV_S25FL128_DEVICE_ID,
+     MV_S25FL128_MAX_SPI_FREQ,
+     MV_M25P128_MAX_FAST_SPI_FREQ,
+     MV_M25P128_FAST_READ_DUMMY_BYTES
+    }
+};
+
+/* Static Functions */
+static MV_STATUS    mvWriteEnable   (MV_SFLASH_INFO * pFlinfo);
+static MV_STATUS    mvStatusRegGet  (MV_SFLASH_INFO * pFlinfo, MV_U8 * pStatReg);
+static MV_STATUS    mvStatusRegSet  (MV_SFLASH_INFO * pFlinfo, MV_U8 sr);
+static MV_STATUS    mvWaitOnWipClear(MV_SFLASH_INFO * pFlinfo);
+static MV_STATUS    mvSFlashPageWr  (MV_SFLASH_INFO * pFlinfo, MV_U32 offset, \
+							         MV_U8* pPageBuff, MV_U32 buffSize);
+static MV_STATUS    mvSFlashWithDefaultsIdGet (MV_SFLASH_INFO * pFlinfo, \
+                                            MV_U8* manId, MV_U16* devId);
+
+/*******************************************************************************
+* mvWriteEnable - serialize the write enable sequence
+*
+* DESCRIPTION:
+*       transmit the sequence for write enable
+*
+********************************************************************************/
+static MV_STATUS mvWriteEnable(MV_SFLASH_INFO * pFlinfo)
+{
+	MV_U8 cmd[MV_SFLASH_WREN_CMND_LENGTH];
+
+
+    cmd[0] = sflash[pFlinfo->index].opcdWREN;
+
+	return mvSpiWriteThenRead(cmd, MV_SFLASH_WREN_CMND_LENGTH, NULL, 0, 0);
+}
+
+/*******************************************************************************
+* mvStatusRegGet - Retrieve the value of the status register
+*
+* DESCRIPTION:
+*       perform the RDSR sequence to get the 8bit status register
+*
+********************************************************************************/
+static MV_STATUS mvStatusRegGet(MV_SFLASH_INFO * pFlinfo, MV_U8 * pStatReg)
+{
+    MV_STATUS ret;
+	MV_U8 cmd[MV_SFLASH_RDSR_CMND_LENGTH];
+	MV_U8 sr[MV_SFLASH_RDSR_REPLY_LENGTH];
+
+
+
+
+	cmd[0] = sflash[pFlinfo->index].opcdRDSR;
+
+	if ((ret = mvSpiWriteThenRead(cmd, MV_SFLASH_RDSR_CMND_LENGTH, sr,
+                                         MV_SFLASH_RDSR_REPLY_LENGTH,0)) != MV_OK)
+        return ret;
+
+    *pStatReg = sr[0];
+
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvWaitOnWipClear - Block waiting for the WIP (write in progress) to be cleared
+*
+* DESCRIPTION:
+*       Block waiting for the WIP (write in progress) to be cleared
+*
+********************************************************************************/
+static MV_STATUS mvWaitOnWipClear(MV_SFLASH_INFO * pFlinfo)
+{
+    MV_STATUS ret;
+	MV_U32 i;
+    MV_U8 stat;
+
+	for (i=0; i<MV_SFLASH_MAX_WAIT_LOOP; i++)
+	{
+        if ((ret = mvStatusRegGet(pFlinfo, &stat)) != MV_OK)
+            return ret;
+
+		if ((stat & MV_SFLASH_STATUS_REG_WIP_MASK) == 0)
+			return MV_OK;
+	}
+
+    DB(mvOsPrintf("%s WARNING: Write Timeout!\n", __FUNCTION__);)
+	return MV_TIMEOUT;
+}
+
+/*******************************************************************************
+* mvWaitOnChipEraseDone - Block waiting for the WIP (write in progress) to be
+*                         cleared after a chip erase command which is supposed
+*                         to take about 2:30 minutes
+*
+* DESCRIPTION:
+*       Block waiting for the WIP (write in progress) to be cleared
+*
+********************************************************************************/
+static MV_STATUS mvWaitOnChipEraseDone(MV_SFLASH_INFO * pFlinfo)
+{
+    MV_STATUS ret;
+	MV_U32 i;
+    MV_U8 stat;
+
+	for (i=0; i<MV_SFLASH_CHIP_ERASE_MAX_WAIT_LOOP; i++)
+	{
+        if ((ret = mvStatusRegGet(pFlinfo, &stat)) != MV_OK)
+            return ret;
+
+		if ((stat & MV_SFLASH_STATUS_REG_WIP_MASK) == 0)
+			return MV_OK;
+	}
+
+    DB(mvOsPrintf("%s WARNING: Write Timeout!\n", __FUNCTION__);)
+	return MV_TIMEOUT;
+}
+
+/*******************************************************************************
+*  mvStatusRegSet - Set the value of the 8bit status register
+*
+* DESCRIPTION:
+*       Set the value of the 8bit status register
+*
+********************************************************************************/
+static MV_STATUS mvStatusRegSet(MV_SFLASH_INFO * pFlinfo, MV_U8 sr)
+{
+    MV_STATUS ret;
+	MV_U8 cmd[MV_SFLASH_WRSR_CMND_LENGTH];
+
+
+    /* Issue the Write enable command prior the WRSR command */
+	if ((ret = mvWriteEnable(pFlinfo)) != MV_OK)
+		return ret;
+
+    /* Write the SR with the new values */
+    cmd[0] = sflash[pFlinfo->index].opcdWRSR;
+	cmd[1] = sr;
+
+	if ((ret = mvSpiWriteThenRead(cmd, MV_SFLASH_WRSR_CMND_LENGTH, NULL, 0, 0)) != MV_OK)
+		return ret;
+
+    if ((ret = mvWaitOnWipClear(pFlinfo)) != MV_OK)
+		return ret;
+
+    mvOsDelay(1);
+
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvSFlashPageWr - Write up to 256 Bytes in the same page
+*
+* DESCRIPTION:
+*       Write a buffer up to the page size in length provided that the whole address
+*		range is within the same page (alligned to page bounderies)
+*
+*******************************************************************************/
+static MV_STATUS mvSFlashPageWr (MV_SFLASH_INFO * pFlinfo, MV_U32 offset,
+							     MV_U8* pPageBuff, MV_U32 buffSize)
+{
+    MV_STATUS ret;
+	MV_U8 cmd[MV_SFLASH_PP_CMND_LENGTH];
+
+
+    /* Protection - check if the model was detected */
+    if (pFlinfo->index >= MV_ARRAY_SIZE(sflash))
+    {
+        DB(mvOsPrintf("%s WARNING: Invalid parameter device index!\n", __FUNCTION__);)
+        return MV_BAD_PARAM;
+    }
+
+	/* check that we do not cross the page bounderies */
+    if (((offset & (sflash[pFlinfo->index].pageSize - 1)) + buffSize) >
+        sflash[pFlinfo->index].pageSize)
+    {
+        DB(mvOsPrintf("%s WARNING: Page allignment problem!\n", __FUNCTION__);)
+		return MV_OUT_OF_RANGE;
+    }
+
+	/* Issue the Write enable command prior the page program command */
+	if ((ret = mvWriteEnable(pFlinfo)) != MV_OK)
+		return ret;
+
+    cmd[0] = sflash[pFlinfo->index].opcdPP;
+	cmd[1] = ((offset >> 16) & 0xFF);
+	cmd[2] = ((offset >> 8) & 0xFF);
+	cmd[3] = (offset & 0xFF);
+
+	if ((ret = mvSpiWriteThenWrite(cmd, MV_SFLASH_PP_CMND_LENGTH, pPageBuff, buffSize)) != MV_OK)
+		return ret;
+
+	if ((ret = mvWaitOnWipClear(pFlinfo)) != MV_OK)
+		return ret;
+
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvSFlashWithDefaultsIdGet - Try to read the manufacturer and Device IDs from
+*       the device using the default RDID opcode and the default WREN opcode.
+*
+* DESCRIPTION:
+*       This is used to detect a generic device that uses the default opcodes
+*       for the WREN and RDID.
+*
+********************************************************************************/
+static MV_STATUS mvSFlashWithDefaultsIdGet (MV_SFLASH_INFO * pFlinfo, MV_U8* manId, MV_U16* devId)
+{
+    MV_STATUS ret;
+    MV_U8 cmdRDID[MV_SFLASH_RDID_CMND_LENGTH];
+	MV_U8 id[MV_SFLASH_RDID_REPLY_LENGTH];
+
+
+
+    /* Use the default RDID opcode to read the IDs */
+    cmdRDID[0] = MV_SFLASH_DEFAULT_RDID_OPCD;   /* unknown model try default */
+	if ((ret = mvSpiWriteThenRead(cmdRDID, MV_SFLASH_RDID_CMND_LENGTH, id, MV_SFLASH_RDID_REPLY_LENGTH, 0)) != MV_OK)
+		return ret;
+
+	*manId = id[0];
+	*devId = 0;
+	*devId |= (id[1] << 8);
+	*devId |= id[2];
+
+	return MV_OK;
+}
+
+/*
+#####################################################################################
+#####################################################################################
+*/
+
+/*******************************************************************************
+* mvSFlashInit - Initialize the serial flash device
+*
+* DESCRIPTION:
+*       Perform the neccessary initialization and configuration
+*
+* INPUT:
+*       pFlinfo: pointer to the Flash information structure
+*           pFlinfo->baseAddr: base address in fast mode.
+*           pFlinfo->index: Index of the flash in the sflash tabel. If the SPI
+*                           flash device does not support read Id command with
+*                           the standard opcode, then the user should supply this
+*                           as an input to skip the autodetection process!!!!
+*
+* OUTPUT:
+*       pFlinfo: pointer to the Flash information structure after detection
+*           pFlinfo->manufacturerId: Manufacturer ID
+*           pFlinfo->deviceId: Device ID
+*           pFlinfo->sectorSize: size of the sector (all sectors are the same).
+*           pFlinfo->sectorNumber: number of sectors.
+*           pFlinfo->pageSize: size of the page.
+*           pFlinfo->index: Index of the detected flash in the sflash tabel
+*
+* RETURN:
+*       Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSFlashInit (MV_SFLASH_INFO * pFlinfo)
+{
+    MV_STATUS ret;
+    MV_U8 manf;
+    MV_U16 dev;
+    MV_U32 indx;
+    MV_BOOL detectFlag = MV_FALSE;
+
+    /* check for NULL pointer */
+    if (pFlinfo == NULL)
+    {
+        mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+        return MV_BAD_PARAM;
+    }
+
+    /* Initialize the SPI interface with low frequency to make sure that the read ID succeeds */
+    if ((ret = mvSpiInit(MV_SFLASH_BASIC_SPI_FREQ)) != MV_OK)
+    {
+        mvOsPrintf("%s ERROR: Failed to initialize the SPI interface!\n", __FUNCTION__);
+        return ret;
+    }
+
+    /* First try to read the Manufacturer and Device IDs */
+    if ((ret = mvSFlashIdGet(pFlinfo, &manf, &dev)) != MV_OK)
+    {
+        mvOsPrintf("%s ERROR: Failed to get the SFlash ID!\n", __FUNCTION__);
+        return ret;
+    }
+
+    /* loop over the whole table and look for the appropriate SFLASH */
+    for (indx=0; indx<MV_ARRAY_SIZE(sflash); indx++)
+    {
+        if ((manf == sflash[indx].manufacturerId) && (dev == sflash[indx].deviceId))
+        {
+            pFlinfo->manufacturerId = manf;
+            pFlinfo->deviceId = dev;
+            pFlinfo->index = indx;
+            detectFlag = MV_TRUE;
+        }
+    }
+
+    if(!detectFlag)
+    {
+        mvOsPrintf("%s ERROR: Unknown SPI flash device!\n", __FUNCTION__);
+        return MV_FAIL;
+    }
+
+    /* fill the info based on the model detected */
+    pFlinfo->sectorSize = sflash[pFlinfo->index].sectorSize;
+    pFlinfo->sectorNumber = sflash[pFlinfo->index].sectorNumber;
+    pFlinfo->pageSize = sflash[pFlinfo->index].pageSize;
+
+    /* Set the SPI frequency to the MAX allowed for the device for best performance */
+    if ((ret = mvSpiBaudRateSet(sflash[pFlinfo->index].spiMaxFreq)) != MV_OK)
+    {
+        mvOsPrintf("%s ERROR: Failed to set the SPI frequency!\n", __FUNCTION__);
+        return ret;
+    }
+
+    /* As default lock the SR */
+    if ((ret = mvSFlashStatRegLock(pFlinfo, MV_TRUE)) != MV_OK)
+        return ret;
+
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvSFlashSectorErase - Erasse a single sector of the serial flash
+*
+* DESCRIPTION:
+*       Issue the erase sector command and address
+*
+* INPUT:
+*       pFlinfo: pointer to the Flash information structure
+*		secNumber: sector Number to erase (0 -> (sectorNumber-1))
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSFlashSectorErase (MV_SFLASH_INFO * pFlinfo, MV_U32 secNumber)
+{
+    MV_STATUS ret;
+	MV_U8 cmd[MV_SFLASH_SE_CMND_LENGTH];
+
+    MV_U32 secAddr = (secNumber * pFlinfo->sectorSize);
+#if 0
+    MV_U32 i;
+    MV_U32 * pW = (MV_U32*) (secAddr + pFlinfo->baseAddr);
+    MV_U32 erasedWord = 0xFFFFFFFF;
+    MV_U32 wordsPerSector = (pFlinfo->sectorSize / sizeof(MV_U32));
+    MV_BOOL eraseNeeded = MV_FALSE;
+#endif
+    /* check for NULL pointer */
+    if (pFlinfo == NULL)
+    {
+        mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+        return MV_BAD_PARAM;
+    }
+
+    /* Protection - check if the model was detected */
+    if (pFlinfo->index >= MV_ARRAY_SIZE(sflash))
+    {
+        DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);)
+        return MV_BAD_PARAM;
+    }
+
+    /* check that the sector number is valid */
+    if (secNumber >= pFlinfo->sectorNumber)
+    {
+        DB(mvOsPrintf("%s WARNING: Invaild parameter sector number!\n", __FUNCTION__);)
+        return MV_BAD_PARAM;
+    }
+    
+    /* we don't want to access SPI in direct mode from in-direct API, 
+	becasue of timing issue between CS asserts. */
+#if 0
+    /* First compare to FF and check if erase is needed */
+    for (i=0; i<wordsPerSector; i++)
+    {
+        if (memcmp(pW, &erasedWord, sizeof(MV_U32)) != 0)
+        {
+            eraseNeeded = MV_TRUE;
+            break;
+        }
+
+        ++pW;
+    }
+    if (!eraseNeeded)
+        return MV_OK;
+#endif
+
+    cmd[0] = sflash[pFlinfo->index].opcdSE;
+	cmd[1] = ((secAddr >> 16) & 0xFF);
+	cmd[2] = ((secAddr >> 8) & 0xFF);
+	cmd[3] = (secAddr & 0xFF);
+
+	/* Issue the Write enable command prior the sector erase command */
+	if ((ret = mvWriteEnable(pFlinfo)) != MV_OK)
+		return ret;
+
+	if ((ret = mvSpiWriteThenWrite(cmd, MV_SFLASH_SE_CMND_LENGTH, NULL, 0)) != MV_OK)
+		return ret;
+
+	if ((ret = mvWaitOnWipClear(pFlinfo)) != MV_OK)
+		return ret;
+
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvSFlashChipErase - Erasse the whole serial flash
+*
+* DESCRIPTION:
+*       Issue the bulk (chip) erase command
+*
+* INPUT:
+*       pFlinfo: pointer to the Flash information structure
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSFlashChipErase (MV_SFLASH_INFO * pFlinfo)
+{
+    MV_STATUS ret;
+	MV_U8 cmd[MV_SFLASH_BE_CMND_LENGTH];
+
+
+    /* check for NULL pointer */
+    if (pFlinfo == NULL)
+    {
+        mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+        return MV_BAD_PARAM;
+    }
+
+    /* Protection - check if the model was detected */
+    if (pFlinfo->index >= MV_ARRAY_SIZE(sflash))
+    {
+        DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);)
+        return MV_BAD_PARAM;
+    }
+
+    cmd[0] = sflash[pFlinfo->index].opcdBE;
+
+	/* Issue the Write enable command prior the Bulk erase command */
+	if ((ret = mvWriteEnable(pFlinfo)) != MV_OK)
+		return ret;
+
+    if ((ret = mvSpiWriteThenWrite(cmd, MV_SFLASH_BE_CMND_LENGTH, NULL, 0)) != MV_OK)
+		return ret;
+
+	if ((ret = mvWaitOnChipEraseDone(pFlinfo)) != MV_OK)
+		return ret;
+
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvSFlashBlockRd - Read from the serial flash
+*
+* DESCRIPTION:
+*       Issue the read command and address then perfom the needed read
+*
+* INPUT:
+*       pFlinfo: pointer to the Flash information structure
+*		offset: byte offset with the flash to start reading from
+*		pReadBuff: pointer to the buffer to read the data in
+*		buffSize: size of the buffer to read.
+*
+* OUTPUT:
+*       pReadBuff: pointer to the buffer containing the read data
+*
+* RETURN:
+*       Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSFlashBlockRd (MV_SFLASH_INFO * pFlinfo, MV_U32 offset,
+						   MV_U8* pReadBuff, MV_U32 buffSize)
+{
+	MV_U8 cmd[MV_SFLASH_READ_CMND_LENGTH];
+
+
+    /* check for NULL pointer */
+    if ((pFlinfo == NULL) || (pReadBuff == NULL))
+    {
+        mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+        return MV_BAD_PARAM;
+    }
+
+    /* Protection - check if the model was detected */
+    if (pFlinfo->index >= MV_ARRAY_SIZE(sflash))
+    {
+        DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);)
+        return MV_BAD_PARAM;
+    }
+
+    cmd[0] = sflash[pFlinfo->index].opcdREAD;
+	cmd[1] = ((offset >> 16) & 0xFF);
+	cmd[2] = ((offset >> 8) & 0xFF);
+	cmd[3] = (offset & 0xFF);
+
+	return mvSpiWriteThenRead(cmd, MV_SFLASH_READ_CMND_LENGTH, pReadBuff, buffSize, 0);
+}
+
+/*******************************************************************************
+* mvSFlashFastBlockRd - Fast read from the serial flash
+*
+* DESCRIPTION:
+*       Issue the fast read command and address then perfom the needed read
+*
+* INPUT:
+*       pFlinfo: pointer to the Flash information structure
+*		offset: byte offset with the flash to start reading from
+*		pReadBuff: pointer to the buffer to read the data in
+*		buffSize: size of the buffer to read.
+*
+* OUTPUT:
+*       pReadBuff: pointer to the buffer containing the read data
+*
+* RETURN:
+*       Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSFlashFastBlockRd (MV_SFLASH_INFO * pFlinfo, MV_U32 offset,
+						       MV_U8* pReadBuff, MV_U32 buffSize)
+{
+    MV_U8 cmd[MV_SFLASH_READ_CMND_LENGTH];
+    MV_STATUS ret;
+
+    /* check for NULL pointer */
+    if ((pFlinfo == NULL) || (pReadBuff == NULL))
+    {
+        mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+        return MV_BAD_PARAM;
+    }
+
+    /* Protection - check if the model was detected */
+    if (pFlinfo->index >= MV_ARRAY_SIZE(sflash))
+    {
+        DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);)
+        return MV_BAD_PARAM;
+    }
+
+    /* Set the SPI frequency to the MAX allowed for fast-read operations */
+    mvOsPrintf("Setting freq to %d.\n",sflash[pFlinfo->index].spiMaxFastFreq);
+    if ((ret = mvSpiBaudRateSet(sflash[pFlinfo->index].spiMaxFastFreq)) != MV_OK)
+    {
+        mvOsPrintf("%s ERROR: Failed to set the SPI fast frequency!\n", __FUNCTION__);
+        return ret;
+    }
+
+    cmd[0] = sflash[pFlinfo->index].opcdFSTRD;
+    cmd[1] = ((offset >> 16) & 0xFF);
+    cmd[2] = ((offset >> 8) & 0xFF);
+    cmd[3] = (offset & 0xFF);
+
+
+    ret = mvSpiWriteThenRead(cmd, MV_SFLASH_READ_CMND_LENGTH, pReadBuff, buffSize,
+                             sflash[pFlinfo->index].spiFastRdDummyBytes);
+
+    /* Reset the SPI frequency to the MAX allowed for the device for best performance */
+    if ((ret = mvSpiBaudRateSet(sflash[pFlinfo->index].spiMaxFreq)) != MV_OK)
+    {
+        mvOsPrintf("%s ERROR: Failed to set the SPI frequency!\n", __FUNCTION__);
+        return ret;
+    }
+
+    return ret;
+}
+
+
+/*******************************************************************************
+* mvSFlashBlockWr - Write a buffer with any size
+*
+* DESCRIPTION:
+*       write regardless of the page boundaries and size limit per Page
+*		program command
+*
+* INPUT:
+*       pFlinfo: pointer to the Flash information structure
+*		offset: byte offset within the flash region
+*		pWriteBuff: pointer to the buffer holding the data to program
+*		buffSize: size of the buffer to write
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSFlashBlockWr (MV_SFLASH_INFO * pFlinfo, MV_U32 offset,
+						   MV_U8* pWriteBuff, MV_U32 buffSize)
+{
+    MV_STATUS ret;
+	MV_U32 data2write	= buffSize;
+    MV_U32 preAllOffset = (offset & MV_SFLASH_PAGE_ALLIGN_MASK(MV_M25P_PAGE_SIZE));
+    MV_U32 preAllSz		= (preAllOffset ? (MV_M25P_PAGE_SIZE - preAllOffset) : 0);
+	MV_U32 writeOffset	= offset;
+
+    /* check for NULL pointer */
+#ifndef CONFIG_MARVELL
+    if(NULL == pWriteBuff)
+    {
+        mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+        return MV_BAD_PARAM;
+    }
+#endif
+
+    if (pFlinfo == NULL)
+    {
+        mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+        return MV_BAD_PARAM;
+    }
+
+    /* Protection - check if the model was detected */
+    if (pFlinfo->index >= MV_ARRAY_SIZE(sflash))
+    {
+        DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);)
+        return MV_BAD_PARAM;
+    }
+
+	/* check that the buffer size does not exceed the flash size */
+    if ((offset + buffSize) > mvSFlashSizeGet(pFlinfo))
+    {
+        DB(mvOsPrintf("%s WARNING: Write exceeds flash size!\n", __FUNCTION__);)
+	    return MV_OUT_OF_RANGE;
+    }
+
+	/* check if the total block size is less than the first chunk remainder */
+	if (data2write < preAllSz)
+		preAllSz = data2write;
+
+	/* check if programing does not start at a 64byte alligned offset */
+	if (preAllSz)
+	{
+		if ((ret = mvSFlashPageWr(pFlinfo, writeOffset, pWriteBuff, preAllSz)) != MV_OK)
+			return ret;
+
+		/* increment pointers and counters */
+		writeOffset += preAllSz;
+		data2write -= preAllSz;
+		pWriteBuff += preAllSz;
+	}
+
+	/* program the data that fits in complete page chunks */
+	while (data2write >= sflash[pFlinfo->index].pageSize)
+	{
+		if ((ret = mvSFlashPageWr(pFlinfo, writeOffset, pWriteBuff, sflash[pFlinfo->index].pageSize)) != MV_OK)
+			return ret;
+
+		/* increment pointers and counters */
+		writeOffset += sflash[pFlinfo->index].pageSize;
+		data2write -= sflash[pFlinfo->index].pageSize;
+		pWriteBuff += sflash[pFlinfo->index].pageSize;
+	}
+
+	/* program the last partial chunk */
+	if (data2write)
+	{
+		if ((ret = mvSFlashPageWr(pFlinfo, writeOffset, pWriteBuff, data2write)) != MV_OK)
+			return ret;
+	}
+
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvSFlashIdGet - Get the manufacturer and device IDs.
+*
+* DESCRIPTION:
+*       Get the Manufacturer and device IDs from the serial flash through
+*		writing the RDID command then reading 3 bytes of data. In case that
+*       this command was called for the first time in order to detect the
+*       manufacturer and device IDs, then the default RDID opcode will be used
+*       unless the device index is indicated by the user (in case the SPI flash
+*       does not use the default RDID opcode).
+*
+* INPUT:
+*       pFlinfo: pointer to the Flash information structure
+*		pManId: pointer to the 8bit variable to hold the manufacturing ID
+*		pDevId: pointer to the 16bit variable to hold the device ID
+*
+* OUTPUT:
+*		pManId: pointer to the 8bit variable holding the manufacturing ID
+*		pDevId: pointer to the 16bit variable holding the device ID
+*
+* RETURN:
+*       Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSFlashIdGet (MV_SFLASH_INFO * pFlinfo, MV_U8* pManId, MV_U16* pDevId)
+{
+    MV_STATUS ret;
+	MV_U8 cmd[MV_SFLASH_RDID_CMND_LENGTH];
+	MV_U8 id[MV_SFLASH_RDID_REPLY_LENGTH];
+
+
+
+    /* check for NULL pointer */
+    if ((pFlinfo == NULL) || (pManId == NULL) || (pDevId == NULL))
+    {
+        mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+        return MV_BAD_PARAM;
+    }
+
+    if (pFlinfo->index >= MV_ARRAY_SIZE(sflash))
+        return mvSFlashWithDefaultsIdGet(pFlinfo, pManId, pDevId);
+    else
+        cmd[0] = sflash[pFlinfo->index].opcdRDID;
+
+	if ((ret = mvSpiWriteThenRead(cmd, MV_SFLASH_RDID_CMND_LENGTH, id, MV_SFLASH_RDID_REPLY_LENGTH, 0)) != MV_OK)
+		return ret;
+
+	*pManId = id[0];
+	*pDevId = 0;
+	*pDevId |= (id[1] << 8);
+	*pDevId |= id[2];
+
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvSFlashWpRegionSet - Set the Write-Protected region
+*
+* DESCRIPTION:
+*       Set the Write-Protected region
+*
+* INPUT:
+*       pFlinfo: pointer to the Flash information structure
+*		wpRegion: which region will be protected
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSFlashWpRegionSet (MV_SFLASH_INFO * pFlinfo, MV_SFLASH_WP_REGION wpRegion)
+{
+    MV_U8 wpMask;
+
+    /* check for NULL pointer */
+    if (pFlinfo == NULL)
+    {
+        mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+        return MV_BAD_PARAM;
+    }
+
+    /* Protection - check if the model was detected */
+    if (pFlinfo->index >= MV_ARRAY_SIZE(sflash))
+    {
+        DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);)
+        return MV_BAD_PARAM;
+    }
+
+    /* Check if the chip is an ST flash; then WP supports only 3 bits */
+    if (pFlinfo->manufacturerId == MV_M25PXXX_ST_MANF_ID)
+    {
+        switch (wpRegion)
+        {
+            case MV_WP_NONE:
+                wpMask = MV_M25P_STATUS_BP_NONE;
+                break;
+
+            case MV_WP_UPR_1OF128:
+                DB(mvOsPrintf("%s WARNING: Invaild option for this flash chip!\n", __FUNCTION__);)
+                return MV_NOT_SUPPORTED;
+
+            case MV_WP_UPR_1OF64:
+                wpMask = MV_M25P_STATUS_BP_1_OF_64;
+                break;
+
+            case MV_WP_UPR_1OF32:
+                wpMask = MV_M25P_STATUS_BP_1_OF_32;
+                break;
+
+            case MV_WP_UPR_1OF16:
+                wpMask = MV_M25P_STATUS_BP_1_OF_16;
+                break;
+
+            case MV_WP_UPR_1OF8:
+                wpMask = MV_M25P_STATUS_BP_1_OF_8;
+                break;
+
+            case MV_WP_UPR_1OF4:
+                wpMask = MV_M25P_STATUS_BP_1_OF_4;
+                break;
+
+            case MV_WP_UPR_1OF2:
+                wpMask = MV_M25P_STATUS_BP_1_OF_2;
+                break;
+
+            case MV_WP_ALL:
+                wpMask = MV_M25P_STATUS_BP_ALL;
+                break;
+
+            default:
+                DB(mvOsPrintf("%s WARNING: Invaild parameter WP region!\n", __FUNCTION__);)
+                return MV_BAD_PARAM;
+        }
+    }
+    /* check if the manufacturer is MXIC then the WP is 4bits */
+    else if (pFlinfo->manufacturerId == MV_MXIC_MANF_ID)
+    {
+        switch (wpRegion)
+        {
+            case MV_WP_NONE:
+                wpMask = MV_MX25L_STATUS_BP_NONE;
+                break;
+
+            case MV_WP_UPR_1OF128:
+                wpMask = MV_MX25L_STATUS_BP_1_OF_128;
+                break;
+
+            case MV_WP_UPR_1OF64:
+                wpMask = MV_MX25L_STATUS_BP_1_OF_64;
+                break;
+
+            case MV_WP_UPR_1OF32:
+                wpMask = MV_MX25L_STATUS_BP_1_OF_32;
+                break;
+
+            case MV_WP_UPR_1OF16:
+                wpMask = MV_MX25L_STATUS_BP_1_OF_16;
+                break;
+
+            case MV_WP_UPR_1OF8:
+                wpMask = MV_MX25L_STATUS_BP_1_OF_8;
+                break;
+
+            case MV_WP_UPR_1OF4:
+                wpMask = MV_MX25L_STATUS_BP_1_OF_4;
+                break;
+
+            case MV_WP_UPR_1OF2:
+                wpMask = MV_MX25L_STATUS_BP_1_OF_2;
+                break;
+
+            case MV_WP_ALL:
+                wpMask = MV_MX25L_STATUS_BP_ALL;
+                break;
+
+            default:
+                DB(mvOsPrintf("%s WARNING: Invaild parameter WP region!\n", __FUNCTION__);)
+                return MV_BAD_PARAM;
+        }
+    }
+    /* check if the manufacturer is SPANSION then the WP is 4bits */
+    else if (pFlinfo->manufacturerId == MV_SPANSION_MANF_ID)
+    {
+        switch (wpRegion)
+        {
+            case MV_WP_NONE:
+                wpMask = MV_S25FL_STATUS_BP_NONE;
+                break;
+
+            case MV_WP_UPR_1OF128:
+                DB(mvOsPrintf("%s WARNING: Invaild option for this flash chip!\n", __FUNCTION__);)
+                return MV_NOT_SUPPORTED;
+
+            case MV_WP_UPR_1OF64:
+                wpMask = MV_S25FL_STATUS_BP_1_OF_64;
+                break;
+
+            case MV_WP_UPR_1OF32:
+                wpMask = MV_S25FL_STATUS_BP_1_OF_32;
+                break;
+
+            case MV_WP_UPR_1OF16:
+                wpMask = MV_S25FL_STATUS_BP_1_OF_16;
+                break;
+
+            case MV_WP_UPR_1OF8:
+                wpMask = MV_S25FL_STATUS_BP_1_OF_8;
+                break;
+
+            case MV_WP_UPR_1OF4:
+                wpMask = MV_S25FL_STATUS_BP_1_OF_4;
+                break;
+
+            case MV_WP_UPR_1OF2:
+                wpMask = MV_S25FL_STATUS_BP_1_OF_2;
+                break;
+
+            case MV_WP_ALL:
+                wpMask = MV_S25FL_STATUS_BP_ALL;
+                break;
+
+
+            default:
+                DB(mvOsPrintf("%s WARNING: Invaild parameter WP region!\n", __FUNCTION__);)
+                return MV_BAD_PARAM;
+        }
+    }
+    else
+    {
+        DB(mvOsPrintf("%s WARNING: Invaild parameter Manufacturer ID!\n", __FUNCTION__);)
+        return MV_BAD_PARAM;
+    }
+
+    /* Verify that the SRWD bit is always set - register is s/w locked */
+    wpMask |= MV_SFLASH_STATUS_REG_SRWD_MASK;
+
+	return mvStatusRegSet(pFlinfo, wpMask);
+}
+
+/*******************************************************************************
+* mvSFlashWpRegionGet - Get the Write-Protected region configured
+*
+* DESCRIPTION:
+*       Get from the chip the Write-Protected region configured
+*
+* INPUT:
+*       pFlinfo: pointer to the Flash information structure
+*		pWpRegion: pointer to the variable to return the WP region in
+*
+* OUTPUT:
+*		wpRegion: pointer to the variable holding the WP region configured
+*
+* RETURN:
+*       Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSFlashWpRegionGet (MV_SFLASH_INFO * pFlinfo, MV_SFLASH_WP_REGION * pWpRegion)
+{
+    MV_STATUS ret;
+	MV_U8 reg;
+
+    /* check for NULL pointer */
+    if ((pFlinfo == NULL) || (pWpRegion == NULL))
+    {
+        mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+        return MV_BAD_PARAM;
+    }
+
+    /* Protection - check if the model was detected */
+    if (pFlinfo->index >= MV_ARRAY_SIZE(sflash))
+    {
+        DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);)
+        return MV_BAD_PARAM;
+    }
+
+    if ((ret = mvStatusRegGet(pFlinfo, &reg)) != MV_OK)
+        return ret;
+
+    /* Check if the chip is an ST flash; then WP supports only 3 bits */
+    if (pFlinfo->manufacturerId == MV_M25PXXX_ST_MANF_ID)
+    {
+        switch ((reg & MV_M25P_STATUS_REG_WP_MASK))
+        {
+            case MV_M25P_STATUS_BP_NONE:
+                *pWpRegion = MV_WP_NONE;
+                break;
+
+            case MV_M25P_STATUS_BP_1_OF_64:
+                *pWpRegion = MV_WP_UPR_1OF64;
+                break;
+
+            case MV_M25P_STATUS_BP_1_OF_32:
+                *pWpRegion = MV_WP_UPR_1OF32;
+                break;
+
+            case MV_M25P_STATUS_BP_1_OF_16:
+                *pWpRegion = MV_WP_UPR_1OF16;
+                break;
+
+            case MV_M25P_STATUS_BP_1_OF_8:
+                *pWpRegion = MV_WP_UPR_1OF8;
+                break;
+
+            case MV_M25P_STATUS_BP_1_OF_4:
+                *pWpRegion = MV_WP_UPR_1OF4;
+                break;
+
+            case MV_M25P_STATUS_BP_1_OF_2:
+                *pWpRegion = MV_WP_UPR_1OF2;
+                break;
+
+            case MV_M25P_STATUS_BP_ALL:
+                *pWpRegion = MV_WP_ALL;
+                break;
+
+            default:
+                DB(mvOsPrintf("%s WARNING: Unidentified WP region in h/w!\n", __FUNCTION__);)
+                return MV_BAD_VALUE;
+        }
+    }
+    /* check if the manufacturer is MXIC then the WP is 4bits */
+    else if (pFlinfo->manufacturerId == MV_MXIC_MANF_ID)
+    {
+        switch ((reg & MV_MX25L_STATUS_REG_WP_MASK))
+        {
+            case MV_MX25L_STATUS_BP_NONE:
+                *pWpRegion = MV_WP_NONE;
+                break;
+
+            case MV_MX25L_STATUS_BP_1_OF_128:
+                *pWpRegion = MV_WP_UPR_1OF128;
+                break;
+
+            case MV_MX25L_STATUS_BP_1_OF_64:
+                *pWpRegion = MV_WP_UPR_1OF64;
+                break;
+
+            case MV_MX25L_STATUS_BP_1_OF_32:
+                *pWpRegion = MV_WP_UPR_1OF32;
+                break;
+
+            case MV_MX25L_STATUS_BP_1_OF_16:
+                *pWpRegion = MV_WP_UPR_1OF16;
+                break;
+
+            case MV_MX25L_STATUS_BP_1_OF_8:
+                *pWpRegion = MV_WP_UPR_1OF8;
+                break;
+
+            case MV_MX25L_STATUS_BP_1_OF_4:
+                *pWpRegion = MV_WP_UPR_1OF4;
+                break;
+
+            case MV_MX25L_STATUS_BP_1_OF_2:
+                *pWpRegion = MV_WP_UPR_1OF2;
+                break;
+
+            case MV_MX25L_STATUS_BP_ALL:
+                *pWpRegion = MV_WP_ALL;
+                break;
+
+            default:
+                DB(mvOsPrintf("%s WARNING: Unidentified WP region in h/w!\n", __FUNCTION__);)
+                return MV_BAD_VALUE;
+        }
+    }
+    /* Check if the chip is an SPANSION flash; then WP supports only 3 bits */
+    else if (pFlinfo->manufacturerId == MV_SPANSION_MANF_ID)
+    {
+        switch ((reg & MV_S25FL_STATUS_REG_WP_MASK))
+        {
+            case MV_S25FL_STATUS_BP_NONE:
+                *pWpRegion = MV_WP_NONE;
+                break;
+
+            case MV_S25FL_STATUS_BP_1_OF_64:
+                *pWpRegion = MV_WP_UPR_1OF64;
+                break;
+
+            case MV_S25FL_STATUS_BP_1_OF_32:
+                *pWpRegion = MV_WP_UPR_1OF32;
+                break;
+
+            case MV_S25FL_STATUS_BP_1_OF_16:
+                *pWpRegion = MV_WP_UPR_1OF16;
+                break;
+
+            case MV_S25FL_STATUS_BP_1_OF_8:
+                *pWpRegion = MV_WP_UPR_1OF8;
+                break;
+
+            case MV_S25FL_STATUS_BP_1_OF_4:
+                *pWpRegion = MV_WP_UPR_1OF4;
+                break;
+
+            case MV_S25FL_STATUS_BP_1_OF_2:
+                *pWpRegion = MV_WP_UPR_1OF2;
+                break;
+
+            case MV_S25FL_STATUS_BP_ALL:
+                *pWpRegion = MV_WP_ALL;
+                break;
+
+            default:
+                DB(mvOsPrintf("%s WARNING: Unidentified WP region in h/w!\n", __FUNCTION__);)
+                return MV_BAD_VALUE;
+        }
+    }
+    else
+    {
+        DB(mvOsPrintf("%s WARNING: Invaild parameter Manufacturer ID!\n", __FUNCTION__);)
+        return MV_BAD_PARAM;
+    }
+
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvSFlashStatRegLock - Lock the status register for writing - W/Vpp
+*		pin should be low to take effect
+*
+* DESCRIPTION:
+*       Lock the access to the Status Register for writing. This will
+*		cause the flash to enter the hardware protection mode if the W/Vpp
+*		is low. If the W/Vpp is hi, the chip will be in soft protection mode, but
+*		the register will continue to be writable if WREN sequence was used.
+*
+* INPUT:
+*       pFlinfo: pointer to the Flash information structure
+*		srLock: enable/disable (MV_TRUE/MV_FALSE) status registor lock mechanism
+*
+* OUTPUT:
+*       None
+*
+* RETURN:
+*       Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSFlashStatRegLock (MV_SFLASH_INFO * pFlinfo, MV_BOOL srLock)
+{
+    MV_STATUS ret;
+	MV_U8 reg;
+
+    /* check for NULL pointer */
+    if (pFlinfo == NULL)
+    {
+        mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+        return MV_BAD_PARAM;
+    }
+
+    /* Protection - check if the model was detected */
+    if (pFlinfo->index >= MV_ARRAY_SIZE(sflash))
+    {
+        DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);)
+        return MV_BAD_PARAM;
+    }
+
+    if ((ret = mvStatusRegGet(pFlinfo, &reg)) != MV_OK)
+        return ret;
+
+	if (srLock)
+		reg |= MV_SFLASH_STATUS_REG_SRWD_MASK;
+	else
+		reg &= ~MV_SFLASH_STATUS_REG_SRWD_MASK;
+
+	return mvStatusRegSet(pFlinfo, reg);
+}
+
+/*******************************************************************************
+* mvSFlashSizeGet - Get the size of the SPI flash
+*
+* DESCRIPTION:
+*       based on the sector number and size of each sector calculate the total
+*       size of the flash memory.
+*
+* INPUT:
+*       pFlinfo: pointer to the Flash information structure
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       Size of the flash in bytes.
+*
+*
+*******************************************************************************/
+MV_U32 mvSFlashSizeGet (MV_SFLASH_INFO * pFlinfo)
+{
+    /* check for NULL pointer */
+    if (pFlinfo == NULL)
+    {
+        mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+        return 0;
+    }
+
+    return (pFlinfo->sectorSize * pFlinfo->sectorNumber);
+}
+
+/*******************************************************************************
+* mvSFlashPowerSaveEnter - Cause the falsh device to go into power save mode
+*
+* DESCRIPTION:
+*       Enter a special power save mode.
+*
+* INPUT:
+*       pFlinfo: pointer to the Flash information structure
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       Size of the flash in bytes.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSFlashPowerSaveEnter(MV_SFLASH_INFO * pFlinfo)
+{
+    MV_STATUS ret;
+	MV_U8 cmd[MV_SFLASH_DP_CMND_LENGTH];
+
+
+    /* check for NULL pointer */
+    if (pFlinfo == NULL)
+    {
+        mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+        return 0;
+    }
+
+    /* Protection - check if the model was detected */
+    if (pFlinfo->index >= MV_ARRAY_SIZE(sflash))
+    {
+        DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);)
+        return MV_BAD_PARAM;
+    }
+
+    /* check that power save mode is supported in the specific device */
+    if (sflash[pFlinfo->index].opcdPwrSave == MV_SFLASH_NO_SPECIFIC_OPCD)
+    {
+        DB(mvOsPrintf("%s WARNING: Power save not supported for this device!\n", __FUNCTION__);)
+        return MV_NOT_SUPPORTED;
+    }
+
+    cmd[0] = sflash[pFlinfo->index].opcdPwrSave;
+
+    if ((ret = mvSpiWriteThenWrite(cmd, MV_SFLASH_DP_CMND_LENGTH, NULL, 0)) != MV_OK)
+		return ret;
+
+	return MV_OK;
+
+}
+
+/*******************************************************************************
+* mvSFlashPowerSaveExit - Cause the falsh device to exit the power save mode
+*
+* DESCRIPTION:
+*       Exit the deep power save mode.
+*
+* INPUT:
+*       pFlinfo: pointer to the Flash information structure
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       Size of the flash in bytes.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSFlashPowerSaveExit (MV_SFLASH_INFO * pFlinfo)
+{
+    MV_STATUS ret;
+	MV_U8 cmd[MV_SFLASH_RES_CMND_LENGTH];
+
+
+    /* check for NULL pointer */
+    if (pFlinfo == NULL)
+    {
+        mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+        return 0;
+    }
+
+    /* Protection - check if the model was detected */
+    if (pFlinfo->index >= MV_ARRAY_SIZE(sflash))
+    {
+        DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);)
+        return MV_BAD_PARAM;
+    }
+
+    /* check that power save mode is supported in the specific device */
+    if (sflash[pFlinfo->index].opcdRES == MV_SFLASH_NO_SPECIFIC_OPCD)
+    {
+        DB(mvOsPrintf("%s WARNING: Read Electronic Signature not supported for this device!\n", __FUNCTION__);)
+        return MV_NOT_SUPPORTED;
+    }
+
+    cmd[0] = sflash[pFlinfo->index].opcdRES;
+
+    if ((ret = mvSpiWriteThenWrite(cmd, MV_SFLASH_RES_CMND_LENGTH, NULL, 0)) != MV_OK)
+		return ret;
+
+    /* add the delay needed for the device to wake up */
+    mvOsDelay(MV_MXIC_DP_EXIT_DELAY);   /* 30 ms */
+
+	return MV_OK;
+
+}
+
+/*******************************************************************************
+* mvSFlashModelGet - Retreive the string with the device manufacturer and model
+*
+* DESCRIPTION:
+*       Retreive the string with the device manufacturer and model
+*
+* INPUT:
+*       pFlinfo: pointer to the Flash information structure
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       pointer to the string indicating the device manufacturer and model
+*
+*
+*******************************************************************************/
+const MV_8 * mvSFlashModelGet (MV_SFLASH_INFO * pFlinfo)
+{
+    static const MV_8 * unknModel = (const MV_8 *)"Unknown";
+
+    /* check for NULL pointer */
+    if (pFlinfo == NULL)
+    {
+        mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+        return 0;
+    }
+
+    /* Protection - check if the model was detected */
+    if (pFlinfo->index >= MV_ARRAY_SIZE(sflash))
+    {
+        DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);)
+        return unknModel;
+    }
+
+    return sflash[pFlinfo->index].deviceModel;
+}
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlash.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlash.h
new file mode 100644
index 0000000000..f441a5cf52
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlash.h
@@ -0,0 +1,166 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED.  The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer.
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    *   Neither the name of Marvell nor the names of its contributors may be
+        used to endorse or promote products derived from this software without
+        specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvSFlashH
+#define __INCmvSFlashH
+
+#include "mvTypes.h"
+
+/* MCAROS */
+#define MV_SFLASH_PAGE_ALLIGN_MASK(pgSz)    (pgSz-1)
+#define MV_ARRAY_SIZE(a)                    ((sizeof(a)) / (sizeof(a[0])))
+
+/* Constants */
+#define MV_INVALID_DEVICE_NUMBER            0xFFFFFFFF
+/* 10 MHz is the minimum possible SPI frequency when tclk is set 200MHz*/
+#define MV_SFLASH_BASIC_SPI_FREQ            10000000
+/* enumerations */
+typedef enum
+{
+	MV_WP_NONE,             /* Unprotect the whole chip */
+    MV_WP_UPR_1OF128,       /* Write protect the upper 1/128 part */
+    MV_WP_UPR_1OF64,        /* Write protect the upper 1/64 part */
+	MV_WP_UPR_1OF32,        /* Write protect the upper 1/32 part */
+	MV_WP_UPR_1OF16,        /* Write protect the upper 1/16 part */
+	MV_WP_UPR_1OF8,         /* Write protect the upper 1/8 part */
+	MV_WP_UPR_1OF4,         /* Write protect the upper 1/4 part */
+	MV_WP_UPR_1OF2,         /* Write protect the upper 1/2 part */
+	MV_WP_ALL               /* Write protect the whole chip */
+} MV_SFLASH_WP_REGION;
+
+/* Type Definitions */
+typedef struct
+{
+    MV_U8   opcdWREN;       /* Write enable opcode */
+    MV_U8   opcdWRDI;       /* Write disable opcode */
+    MV_U8   opcdRDID;       /* Read ID opcode */
+    MV_U8   opcdRDSR;       /* Read Status Register opcode */
+    MV_U8   opcdWRSR;       /* Write Status register opcode */
+    MV_U8   opcdREAD;       /* Read opcode */
+    MV_U8   opcdFSTRD;      /* Fast Read opcode */
+    MV_U8   opcdPP;         /* Page program opcode */
+    MV_U8   opcdSE;         /* Sector erase opcode */
+    MV_U8   opcdBE;         /* Bulk erase opcode */
+    MV_U8   opcdRES;        /* Read electronic signature */
+    MV_U8   opcdPwrSave;    /* Go into power save mode */
+    MV_U32  sectorSize;     /* Size of each sector */
+    MV_U32  sectorNumber;   /* Number of sectors */
+    MV_U32  pageSize;       /* size of each page */
+    const char * deviceModel;    /* string with the device model */
+    MV_U32  manufacturerId; /* The manufacturer ID */
+    MV_U32  deviceId;       /* Device ID */
+    MV_U32  spiMaxFreq;     /* The MAX frequency that can be used with the device */
+    MV_U32  spiMaxFastFreq; /* The MAX frequency that can be used with the device for fast reads */
+    MV_U32  spiFastRdDummyBytes; /* Number of dumy bytes to read before real data when working in fast read mode. */
+} MV_SFLASH_DEVICE_PARAMS;
+
+typedef struct
+{
+    MV_U32					baseAddr;       /* Flash Base Address used in fast mode */
+	MV_U8	                manufacturerId;	/* Manufacturer ID */
+    MV_U16	                deviceId;	    /* Device ID */
+    MV_U32                  sectorSize;     /* Size of each sector - all the same */
+    MV_U32                  sectorNumber;   /* Number of sectors */
+    MV_U32                  pageSize;       /* Page size - affect allignment */
+    MV_U32                  index;          /* index of the device in the sflash table (internal parameter) */
+} MV_SFLASH_INFO;
+
+/* Function Prototypes */
+/* Init */
+MV_STATUS	mvSFlashInit		(MV_SFLASH_INFO * pFlinfo);
+
+/* erase */
+MV_STATUS 	mvSFlashSectorErase (MV_SFLASH_INFO * pFlinfo, MV_U32 secNumber);
+MV_STATUS 	mvSFlashChipErase   (MV_SFLASH_INFO * pFlinfo);
+
+/* Read */
+MV_STATUS	mvSFlashBlockRd  	(MV_SFLASH_INFO * pFlinfo, MV_U32 offset,
+							     MV_U8* pReadBuff, MV_U32 buffSize);
+MV_STATUS mvSFlashFastBlockRd (MV_SFLASH_INFO * pFlinfo, MV_U32 offset,
+							     MV_U8* pReadBuff, MV_U32 buffSize);
+
+/* write regardless of the page boundaries and size limit per Page program command */
+MV_STATUS	mvSFlashBlockWr		(MV_SFLASH_INFO * pFlinfo, MV_U32 offset,
+							     MV_U8* pWriteBuff, MV_U32 buffSize);
+/* Get IDs */
+MV_STATUS 	mvSFlashIdGet      	(MV_SFLASH_INFO * pFlinfo, MV_U8* pManId, MV_U16* pDevId);
+
+/* Set and Get the Write Protection region - if the Status register is not locked */
+MV_STATUS   mvSFlashWpRegionSet (MV_SFLASH_INFO * pFlinfo, MV_SFLASH_WP_REGION wpRegion);
+MV_STATUS   mvSFlashWpRegionGet (MV_SFLASH_INFO * pFlinfo, MV_SFLASH_WP_REGION * pWpRegion);
+
+/* Lock the status register for writing - W/Vpp pin should be low to take effect */
+MV_STATUS   mvSFlashStatRegLock (MV_SFLASH_INFO * pFlinfo, MV_BOOL srLock);
+
+/* Get the regions sizes */
+MV_U32      mvSFlashSizeGet     (MV_SFLASH_INFO * pFlinfo);
+
+/* Cause the falsh device to go into power save mode */
+MV_STATUS   mvSFlashPowerSaveEnter(MV_SFLASH_INFO * pFlinfo);
+MV_STATUS   mvSFlashPowerSaveExit (MV_SFLASH_INFO * pFlinfo);
+
+/* Retreive the string with the device manufacturer and model */
+const MV_8 *     mvSFlashModelGet    (MV_SFLASH_INFO * pFlinfo);
+
+#endif /* __INCmvSFlashH */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlashSpec.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlashSpec.h
new file mode 100644
index 0000000000..eeb44262e2
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlashSpec.h
@@ -0,0 +1,233 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED.  The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer.
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    *   Neither the name of Marvell nor the names of its contributors may be
+        used to endorse or promote products derived from this software without
+        specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvSFlashSpecH
+#define __INCmvSFlashSpecH
+
+/* Constants */
+#define		MV_SFLASH_READ_CMND_LENGTH		    4		/* 1B opcode + 3B address */
+#define		MV_SFLASH_SE_CMND_LENGTH		    4		/* 1B opcode + 3B address */
+#define		MV_SFLASH_BE_CMND_LENGTH		    1		/* 1B opcode */
+#define		MV_SFLASH_PP_CMND_LENGTH		    4		/* 1B opcode + 3B address */
+#define		MV_SFLASH_WREN_CMND_LENGTH		    1		/* 1B opcode */
+#define		MV_SFLASH_WRDI_CMND_LENGTH		    1		/* 1B opcode */
+#define		MV_SFLASH_RDID_CMND_LENGTH		    1		/* 1B opcode */
+#define		MV_SFLASH_RDID_REPLY_LENGTH		    3		/* 1B manf ID and 2B device ID */
+#define		MV_SFLASH_RDSR_CMND_LENGTH		    1		/* 1B opcode */
+#define		MV_SFLASH_RDSR_REPLY_LENGTH		    1		/* 1B status */
+#define		MV_SFLASH_WRSR_CMND_LENGTH		    2		/* 1B opcode + 1B status value */
+#define		MV_SFLASH_DP_CMND_LENGTH		    1		/* 1B opcode */
+#define		MV_SFLASH_RES_CMND_LENGTH		    1		/* 1B opcode */
+
+/* Status Register Bit Masks */
+#define		MV_SFLASH_STATUS_REG_WIP_OFFSET	    0	    /* bit 0; write in progress */
+#define		MV_SFLASH_STATUS_REG_WP_OFFSET	    2       /* bit 2-4; write protect option */
+#define		MV_SFLASH_STATUS_REG_SRWD_OFFSET	7	    /* bit 7; lock status register write */
+#define		MV_SFLASH_STATUS_REG_WIP_MASK	    (0x1 << MV_SFLASH_STATUS_REG_WIP_OFFSET)
+#define		MV_SFLASH_STATUS_REG_SRWD_MASK	    (0x1 << MV_SFLASH_STATUS_REG_SRWD_OFFSET)
+
+#define		MV_SFLASH_MAX_WAIT_LOOP			    1000000
+#define     MV_SFLASH_CHIP_ERASE_MAX_WAIT_LOOP  0x50000000
+
+#define		MV_SFLASH_DEFAULT_RDID_OPCD		    0x9F	/* Default Read ID */
+#define     MV_SFLASH_DEFAULT_WREN_OPCD         0x06	/* Default Write Enable */
+#define     MV_SFLASH_NO_SPECIFIC_OPCD          0x00
+
+/********************************/
+/*  ST M25Pxxx Device Specific  */
+/********************************/
+
+/* Manufacturer IDs and Device IDs for SFLASHs supported by the driver */
+#define     MV_M25PXXX_ST_MANF_ID               0x20
+#define     MV_M25P32_DEVICE_ID                 0x2016
+#define     MV_M25P32_MAX_SPI_FREQ              20000000    /* 20MHz */
+#define     MV_M25P32_MAX_FAST_SPI_FREQ         50000000    /* 50MHz */
+#define     MV_M25P32_FAST_READ_DUMMY_BYTES     1
+#define     MV_M25P64_DEVICE_ID                 0x2017
+#define     MV_M25P64_MAX_SPI_FREQ              20000000    /* 20MHz */
+#define     MV_M25P64_MAX_FAST_SPI_FREQ         50000000    /* 50MHz */
+#define     MV_M25P64_FAST_READ_DUMMY_BYTES     1
+#define     MV_M25P128_DEVICE_ID                0x2018
+#define     MV_M25P128_MAX_SPI_FREQ             20000000    /* 20MHz */
+#define     MV_M25P128_MAX_FAST_SPI_FREQ        50000000    /* 50MHz */
+#define     MV_M25P128_FAST_READ_DUMMY_BYTES    1
+
+
+/* Sector Sizes and population per device model*/
+#define     MV_M25P32_SECTOR_SIZE               0x10000 /* 64K */
+#define     MV_M25P64_SECTOR_SIZE               0x10000 /* 64K */
+#define     MV_M25P128_SECTOR_SIZE              0x40000 /* 256K */
+#define     MV_M25P32_SECTOR_NUMBER             64
+#define     MV_M25P64_SECTOR_NUMBER             128
+#define     MV_M25P128_SECTOR_NUMBER            64
+#define		MV_M25P_PAGE_SIZE				    0x100   /* 256 byte */
+
+#define		MV_M25P_WREN_CMND_OPCD			    0x06	/* Write Enable */
+#define		MV_M25P_WRDI_CMND_OPCD			    0x04	/* Write Disable */
+#define		MV_M25P_RDID_CMND_OPCD			    0x9F	/* Read ID */
+#define		MV_M25P_RDSR_CMND_OPCD			    0x05	/* Read Status Register */
+#define		MV_M25P_WRSR_CMND_OPCD			    0x01	/* Write Status Register */
+#define		MV_M25P_READ_CMND_OPCD			    0x03	/* Sequential Read */
+#define		MV_M25P_FAST_RD_CMND_OPCD		    0x0B	/* Fast Read */
+#define		MV_M25P_PP_CMND_OPCD			    0x02	/* Page Program */
+#define		MV_M25P_SE_CMND_OPCD			    0xD8	/* Sector Erase */
+#define		MV_M25P_BE_CMND_OPCD			    0xC7	/* Bulk Erase */
+#define		MV_M25P_RES_CMND_OPCD			    0xAB	/* Read Electronic Signature */
+
+/* Status Register Write Protect Bit Masks - 3bits */
+#define		MV_M25P_STATUS_REG_WP_MASK	        (0x07 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define     MV_M25P_STATUS_BP_NONE              (0x00 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define     MV_M25P_STATUS_BP_1_OF_64           (0x01 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define     MV_M25P_STATUS_BP_1_OF_32           (0x02 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define     MV_M25P_STATUS_BP_1_OF_16           (0x03 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define     MV_M25P_STATUS_BP_1_OF_8            (0x04 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define     MV_M25P_STATUS_BP_1_OF_4            (0x05 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define     MV_M25P_STATUS_BP_1_OF_2            (0x06 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define     MV_M25P_STATUS_BP_ALL               (0x07 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+
+/************************************/
+/*  MXIC MX25L6405 Device Specific  */
+/************************************/
+
+/* Manufacturer IDs and Device IDs for SFLASHs supported by the driver */
+#define     MV_MXIC_MANF_ID                     0xC2
+#define     MV_MX25L6405_DEVICE_ID              0x2017
+#define     MV_MX25L6405_MAX_SPI_FREQ           20000000    /* 20MHz */
+#define     MV_MX25L6405_MAX_FAST_SPI_FREQ      50000000    /* 50MHz */
+#define     MV_MX25L6405_FAST_READ_DUMMY_BYTES  1
+#define     MV_MXIC_DP_EXIT_DELAY               30          /* 30 ms */
+
+/* Sector Sizes and population per device model*/
+#define     MV_MX25L6405_SECTOR_SIZE            0x10000 /* 64K */
+#define     MV_MX25L6405_SECTOR_NUMBER          128
+#define		MV_MXIC_PAGE_SIZE			        0x100   /* 256 byte */
+
+#define		MV_MX25L_WREN_CMND_OPCD			    0x06	/* Write Enable */
+#define		MV_MX25L_WRDI_CMND_OPCD			    0x04	/* Write Disable */
+#define		MV_MX25L_RDID_CMND_OPCD			    0x9F	/* Read ID */
+#define		MV_MX25L_RDSR_CMND_OPCD			    0x05	/* Read Status Register */
+#define		MV_MX25L_WRSR_CMND_OPCD			    0x01	/* Write Status Register */
+#define		MV_MX25L_READ_CMND_OPCD			    0x03	/* Sequential Read */
+#define		MV_MX25L_FAST_RD_CMND_OPCD		    0x0B	/* Fast Read */
+#define		MV_MX25L_PP_CMND_OPCD			    0x02	/* Page Program */
+#define		MV_MX25L_SE_CMND_OPCD			    0xD8	/* Sector Erase */
+#define		MV_MX25L_BE_CMND_OPCD			    0xC7	/* Bulk Erase */
+#define     MV_MX25L_DP_CMND_OPCD               0xB9    /* Deep Power Down */
+#define		MV_MX25L_RES_CMND_OPCD			    0xAB	/* Read Electronic Signature */
+
+/* Status Register Write Protect Bit Masks - 4bits */
+#define		MV_MX25L_STATUS_REG_WP_MASK	        (0x0F << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define     MV_MX25L_STATUS_BP_NONE             (0x00 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define     MV_MX25L_STATUS_BP_1_OF_128         (0x01 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define     MV_MX25L_STATUS_BP_1_OF_64          (0x02 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define     MV_MX25L_STATUS_BP_1_OF_32          (0x03 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define     MV_MX25L_STATUS_BP_1_OF_16          (0x04 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define     MV_MX25L_STATUS_BP_1_OF_8           (0x05 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define     MV_MX25L_STATUS_BP_1_OF_4           (0x06 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define     MV_MX25L_STATUS_BP_1_OF_2           (0x07 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define     MV_MX25L_STATUS_BP_ALL              (0x0F << MV_SFLASH_STATUS_REG_WP_OFFSET)
+
+/************************************/
+/*  SPANSION S25FL128P Device Specific  */
+/************************************/
+
+/* Manufacturer IDs and Device IDs for SFLASHs supported by the driver */
+#define     MV_SPANSION_MANF_ID                     	0x01
+#define     MV_S25FL128_DEVICE_ID              		0x2018
+#define     MV_S25FL128_MAX_SPI_FREQ           		33000000    /* 33MHz */
+#define     MV_S25FL128_MAX_FAST_SPI_FREQ        	104000000    /* 104MHz */
+#define     MV_S25FL128_FAST_READ_DUMMY_BYTES    	1
+
+/* Sector Sizes and population per device model*/
+#define     MV_S25FL128_SECTOR_SIZE            			0x40000 /* 256K */
+#define     MV_S25FL128_SECTOR_NUMBER          			64
+#define	    MV_S25FL_PAGE_SIZE			        	0x100   /* 256 byte */
+
+#define		MV_S25FL_WREN_CMND_OPCD			    0x06	/* Write Enable */
+#define		MV_S25FL_WRDI_CMND_OPCD			    0x04	/* Write Disable */
+#define		MV_S25FL_RDID_CMND_OPCD			    0x9F	/* Read ID */
+#define		MV_S25FL_RDSR_CMND_OPCD			    0x05	/* Read Status Register */
+#define		MV_S25FL_WRSR_CMND_OPCD			    0x01	/* Write Status Register */
+#define		MV_S25FL_READ_CMND_OPCD			    0x03	/* Sequential Read */
+#define		MV_S25FL_FAST_RD_CMND_OPCD		    0x0B	/* Fast Read */
+#define		MV_S25FL_PP_CMND_OPCD			    0x02	/* Page Program */
+#define		MV_S25FL_SE_CMND_OPCD			    0xD8	/* Sector Erase */
+#define		MV_S25FL_BE_CMND_OPCD			    0xC7	/* Bulk Erase */
+#define     	MV_S25FL_DP_CMND_OPCD               	    0xB9    	/* Deep Power Down */
+#define		MV_S25FL_RES_CMND_OPCD			    0xAB	/* Read Electronic Signature */
+
+/* Status Register Write Protect Bit Masks - 4bits */
+#define		MV_S25FL_STATUS_REG_WP_MASK	        (0x0F << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define     	MV_S25FL_STATUS_BP_NONE             	(0x00 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define     	MV_S25FL_STATUS_BP_1_OF_128         	(0x01 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define     	MV_S25FL_STATUS_BP_1_OF_64          	(0x02 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define     	MV_S25FL_STATUS_BP_1_OF_32          	(0x03 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define     	MV_S25FL_STATUS_BP_1_OF_16          	(0x04 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define     	MV_S25FL_STATUS_BP_1_OF_8           	(0x05 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define     	MV_S25FL_STATUS_BP_1_OF_4           	(0x06 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define     	MV_S25FL_STATUS_BP_1_OF_2           	(0x07 << MV_SFLASH_STATUS_REG_WP_OFFSET)
+#define     	MV_S25FL_STATUS_BP_ALL              	(0x0F << MV_SFLASH_STATUS_REG_WP_OFFSET)
+
+#endif /* __INCmvSFlashSpecH */
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpi.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpi.c
new file mode 100644
index 0000000000..39e0b720d1
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpi.c
@@ -0,0 +1,576 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED.  The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer.
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    *   Neither the name of Marvell nor the names of its contributors may be
+        used to endorse or promote products derived from this software without
+        specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "spi/mvSpi.h"
+#include "spi/mvSpiSpec.h"
+
+#include "ctrlEnv/mvCtrlEnvLib.h"
+
+/* #define MV_DEBUG */
+#ifdef MV_DEBUG
+#define DB(x) x
+#define mvOsPrintf printf
+#else
+#define DB(x)
+#endif
+
+
+/*******************************************************************************
+* mvSpi16bitDataTxRx - Transmt and receive data
+*
+* DESCRIPTION:
+*       Tx data and block waiting for data to be transmitted
+*
+********************************************************************************/
+static MV_STATUS mvSpi16bitDataTxRx (MV_U16 txData, MV_U16 * pRxData)
+{
+    MV_U32 i;
+    MV_BOOL ready = MV_FALSE;
+
+    /* First clear the bit in the interrupt cause register */
+    MV_REG_WRITE(MV_SPI_INT_CAUSE_REG, 0x0);
+
+    /* Transmit data */
+    MV_REG_WRITE(MV_SPI_DATA_OUT_REG, MV_16BIT_LE(txData));
+
+    /* wait with timeout for memory ready */
+    for (i=0; i<MV_SPI_WAIT_RDY_MAX_LOOP; i++)
+    {
+        if (MV_REG_READ(MV_SPI_INT_CAUSE_REG))
+        {
+            ready = MV_TRUE;
+            break;
+        }
+#ifdef MV_SPI_SLEEP_ON_WAIT
+        mvOsSleep(1);
+#endif /* MV_SPI_SLEEP_ON_WAIT */
+    }
+
+    if (!ready)
+        return MV_TIMEOUT;
+
+    /* check that the RX data is needed */
+    if (pRxData)
+    {
+    	if ((MV_U32)pRxData &  0x1) /* check if address is not alligned to 16bit */
+    	{
+#if defined(MV_CPU_LE)
+    		/* perform the data write to the buffer in two stages with 8bit each */
+    		MV_U8 * bptr = (MV_U8*)pRxData;
+    		MV_U16 data = MV_16BIT_LE(MV_REG_READ(MV_SPI_DATA_IN_REG));
+    		*bptr = (data & 0xFF);
+    		++bptr;
+    		*bptr = ((data >> 8) & 0xFF);
+
+#elif defined(MV_CPU_BE)
+
+    		/* perform the data write to the buffer in two stages with 8bit each */
+    		MV_U8 * bptr = (MV_U8 *)pRxData;
+    		MV_U16 data = MV_16BIT_LE(MV_REG_READ(MV_SPI_DATA_IN_REG));
+    		*bptr = ((data >> 8) & 0xFF);
+    		++bptr;
+    		*bptr = (data & 0xFF);
+
+#else
+    #error "CPU endianess isn't defined!\n"
+#endif
+
+    	}
+    	else
+        	*pRxData = MV_16BIT_LE(MV_REG_READ(MV_SPI_DATA_IN_REG));
+    }
+
+    return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvSpi8bitDataTxRx - Transmt and receive data (8bits)
+*
+* DESCRIPTION:
+*       Tx data and block waiting for data to be transmitted
+*
+********************************************************************************/
+static MV_STATUS mvSpi8bitDataTxRx (MV_U8 txData, MV_U8 * pRxData)
+{
+    MV_U32 i;
+    MV_BOOL ready = MV_FALSE;
+
+    /* First clear the bit in the interrupt cause register */
+    MV_REG_WRITE(MV_SPI_INT_CAUSE_REG, 0x0);
+
+    /* Transmit data */
+    MV_REG_WRITE(MV_SPI_DATA_OUT_REG, txData);
+
+    /* wait with timeout for memory ready */
+    for (i=0; i<MV_SPI_WAIT_RDY_MAX_LOOP; i++)
+    {
+        if (MV_REG_READ(MV_SPI_INT_CAUSE_REG))
+        {
+            ready = MV_TRUE;
+            break;
+        }
+#ifdef MV_SPI_SLEEP_ON_WAIT
+        mvOsSleep(1);
+#endif /* MV_SPI_SLEEP_ON_WAIT */
+    }
+
+    if (!ready)
+        return MV_TIMEOUT;
+
+    /* check that the RX data is needed */
+    if (pRxData)
+    	*pRxData = MV_REG_READ(MV_SPI_DATA_IN_REG);
+
+    return MV_OK;
+}
+
+/*
+#####################################################################################
+#####################################################################################
+*/
+
+/*******************************************************************************
+* mvSpiInit - Initialize the SPI controller
+*
+* DESCRIPTION:
+*       Perform the neccessary initialization in order to be able to send an
+*		receive over the SPI interface.
+*
+* INPUT:
+*       serialBaudRate: Baud rate (SPI clock frequency)
+*		use16BitMode: Whether to use 2bytes (MV_TRUE) or 1bytes (MV_FALSE)
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSpiInit	(MV_U32 serialBaudRate)
+{
+    MV_STATUS ret;
+
+    /* Set the serial clock */
+    if ((ret = mvSpiBaudRateSet(serialBaudRate)) != MV_OK)
+        return ret;
+
+    /* For devices in which the SPI is muxed on the MPP with other interfaces*/
+    mvMPPConfigToSPI();
+
+	/* Configure the default SPI mode to be 16bit */
+	MV_REG_BIT_SET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK);
+
+	/* Fix ac timing on SPI in 6183, 6183L and 78x00 only */
+	if ( (mvCtrlModelGet() == MV_6183_DEV_ID) ||
+		 (mvCtrlModelGet() == MV_6183L_DEV_ID) ||
+		(mvCtrlModelGet() == MV_78100_DEV_ID) ||
+		(mvCtrlModelGet() == MV_78200_DEV_ID) ||
+		(mvCtrlModelGet() == MV_76100_DEV_ID))
+	    MV_REG_BIT_SET(MV_SPI_IF_CONFIG_REG, BIT14);
+
+    /* Verify that the CS is deasserted */
+    mvSpiCsDeassert();
+
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvSpiBaudRateSet - Set the Frequency of the SPI clock
+*
+* DESCRIPTION:
+*       Set the Prescale bits to adapt to the requested baud rate (the clock
+*       used for thr SPI).
+*
+* INPUT:
+*       serialBaudRate: Baud rate (SPI clock frequency)
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSpiBaudRateSet (MV_U32 serialBaudRate)
+{
+    MV_U8 i;
+	/* MV_U8 preScale[32] = {1, 1, 2, 3, 4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 14, 15,
+						  2, 2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30};
+	*/
+	MV_U8 preScale[14] = { 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30};
+	MV_U8 bestPrescaleIndx = 100;
+	MV_U32 minBaudOffset = 0xFFFFFFFF;
+	MV_U32 cpuClk = mvBoardTclkGet(); /*mvCpuPclkGet();*/
+	MV_U32 tempReg;
+
+	/* Find the best prescale configuration - less or equal */
+	for (i=0; i<14; i++)
+	{
+		/* check for higher - irrelevent */
+		if ((cpuClk / preScale[i]) > serialBaudRate)
+			continue;
+
+		/* check for exact fit */
+		if ((cpuClk / preScale[i]) == serialBaudRate)
+		{
+			bestPrescaleIndx = i;
+			break;
+		}
+
+		/* check if this is better than the previous one */
+		if ((serialBaudRate - (cpuClk / preScale[i])) < minBaudOffset)
+		{
+			minBaudOffset = (serialBaudRate - (cpuClk / preScale[i]));
+			bestPrescaleIndx = i;
+		}
+	}
+
+	if (bestPrescaleIndx > 14)
+    {
+        mvOsPrintf("%s ERROR: SPI baud rate prescale error!\n", __FUNCTION__);
+		return MV_OUT_OF_RANGE;
+    }
+
+	/* configure the Prescale */
+	tempReg = MV_REG_READ(MV_SPI_IF_CONFIG_REG);
+	tempReg = ((tempReg & ~MV_SPI_CLK_PRESCALE_MASK) | (bestPrescaleIndx + 0x12));
+	MV_REG_WRITE(MV_SPI_IF_CONFIG_REG, tempReg);
+
+    return MV_OK;
+}
+
+/*******************************************************************************
+* mvSpiCsAssert - Assert the Chip Select pin indicating a new transfer
+*
+* DESCRIPTION:
+*       Assert The chip select - used to select an external SPI device
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       Success or Error code.
+*
+********************************************************************************/
+MV_VOID mvSpiCsAssert(MV_VOID)
+{
+    /* For devices in which the SPI is muxed on the MPP with other interfaces*/
+    mvMPPConfigToSPI();
+    mvOsUDelay(1);
+    MV_REG_BIT_SET(MV_SPI_IF_CTRL_REG, MV_SPI_CS_ENABLE_MASK);
+}
+
+/*******************************************************************************
+* mvSpiCsDeassert - DeAssert the Chip Select pin indicating the end of a
+*				  SPI transfer sequence
+*
+* DESCRIPTION:
+*       DeAssert the chip select pin
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       Success or Error code.
+*
+********************************************************************************/
+MV_VOID mvSpiCsDeassert(MV_VOID)
+{
+	MV_REG_BIT_RESET(MV_SPI_IF_CTRL_REG, MV_SPI_CS_ENABLE_MASK);
+
+    /* For devices in which the SPI is muxed on the MPP with other interfaces*/
+    mvMPPConfigToDefault();
+}
+
+/*******************************************************************************
+* mvSpiRead - Read a buffer over the SPI interface
+*
+* DESCRIPTION:
+*       Receive (read) a buffer over the SPI interface in 16bit chunks. If the
+*		buffer size is odd, then the last chunk will be 8bits. Chip select is not
+*       handled at this level.
+*
+* INPUT:
+*		pRxBuff: Pointer to the buffer to hold the received data
+*		buffSize: length of the pRxBuff
+*
+* OUTPUT:
+*		pRxBuff: Pointer to the buffer with the received data
+*
+* RETURN:
+*       Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSpiRead	(MV_U8* pRxBuff, MV_U32 buffSize)
+{
+    MV_STATUS ret;
+	MV_U32 bytesLeft = buffSize;
+	MV_U16* rxPtr = (MV_U16*)pRxBuff;
+
+    /* check for null parameters */
+    if (pRxBuff == NULL)
+    {
+        mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+        return MV_BAD_PARAM;
+    }
+
+    /* Check that the buffer pointer and the buffer size are 16bit aligned */
+    if ((((MV_U32)buffSize & 1) == 0) && (((MV_U32)pRxBuff & 1) == 0))
+    {
+	/* Verify that the SPI mode is in 16bit mode */
+	MV_REG_BIT_SET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK);
+
+	/* TX/RX as long we have complete 16bit chunks */
+	while (bytesLeft >= MV_SPI_16_BIT_CHUNK_SIZE)
+	{
+		/* Transmitted and wait for the transfer to be completed */
+		if ((ret = mvSpi16bitDataTxRx(MV_SPI_DUMMY_WRITE_16BITS, rxPtr)) != MV_OK)
+			return ret;
+
+		/* increment the pointers */
+		rxPtr++;
+		bytesLeft -= MV_SPI_16_BIT_CHUNK_SIZE;
+	}
+
+    }
+    else
+    {
+	/* Verify that the SPI mode is in 8bit mode */
+	MV_REG_BIT_RESET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK);
+
+	/* TX/RX in 8bit chanks */
+	while (bytesLeft > 0)
+	{
+        	/* Transmitted and wait for the transfer to be completed */
+		if ((ret = mvSpi8bitDataTxRx(MV_SPI_DUMMY_WRITE_8BITS, pRxBuff)) != MV_OK)
+			return ret;
+		/* increment the pointers */
+		pRxBuff++;
+		bytesLeft--;
+	}
+    }
+
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvSpiWrite - Transmit a buffer over the SPI interface
+*
+* DESCRIPTION:
+*       Transmit a buffer over the SPI interface in 16bit chunks. If the
+*		buffer size is odd, then the last chunk will be 8bits. No chip select
+*       action is taken.
+*
+* INPUT:
+*		pTxBuff: Pointer to the buffer holding the TX data
+*		buffSize: length of the pTxBuff
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSpiWrite(MV_U8* pTxBuff, MV_U32 buffSize)
+{
+    MV_STATUS ret;
+	MV_U32 bytesLeft = buffSize;
+	MV_U16* txPtr = (MV_U16*)pTxBuff;
+
+    /* check for null parameters */
+    if (pTxBuff == NULL)
+    {
+        mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+        return MV_BAD_PARAM;
+    }
+
+    /* Check that the buffer pointer and the buffer size are 16bit aligned */
+    if ((((MV_U32)buffSize & 1) == 0) && (((MV_U32)pTxBuff & 1) == 0))
+    {
+	/* Verify that the SPI mode is in 16bit mode */
+	MV_REG_BIT_SET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK);
+
+	/* TX/RX as long we have complete 16bit chunks */
+	while (bytesLeft >= MV_SPI_16_BIT_CHUNK_SIZE)
+	{
+        /* Transmitted and wait for the transfer to be completed */
+		if ((ret = mvSpi16bitDataTxRx(*txPtr, NULL)) != MV_OK)
+			return ret;
+
+		/* increment the pointers */
+		txPtr++;
+		bytesLeft -= MV_SPI_16_BIT_CHUNK_SIZE;
+	}
+    }
+    else
+    {
+
+	/* Verify that the SPI mode is in 8bit mode */
+	MV_REG_BIT_RESET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK);
+
+	/* TX/RX in 8bit chanks */
+	while (bytesLeft > 0)
+	{
+		/* Transmitted and wait for the transfer to be completed */
+		if ((ret = mvSpi8bitDataTxRx(*pTxBuff, NULL)) != MV_OK)
+			return ret;
+
+		/* increment the pointers */
+		pTxBuff++;
+		bytesLeft--;
+	}
+    }
+
+	return MV_OK;
+}
+
+
+/*******************************************************************************
+* mvSpiReadWrite - Read and Write a buffer simultanuosely
+*
+* DESCRIPTION:
+*       Transmit and receive a buffer over the SPI in 16bit chunks. If the
+*		buffer size is odd, then the last chunk will be 8bits. The SPI chip
+*       select is not handled implicitely.
+*
+* INPUT:
+*       pRxBuff: Pointer to the buffer to write the RX info in
+*		pTxBuff: Pointer to the buffer holding the TX info
+*		buffSize: length of both the pTxBuff and pRxBuff
+*
+* OUTPUT:
+*       pRxBuff: Pointer of the buffer holding the RX data
+*
+* RETURN:
+*       Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSpiReadWrite(MV_U8* pRxBuff, MV_U8* pTxBuff, MV_U32 buffSize)
+{
+    MV_STATUS ret;
+    MV_U32 bytesLeft = buffSize;
+    MV_U16* txPtr = (MV_U16*)pTxBuff;
+    MV_U16* rxPtr = (MV_U16*)pRxBuff;
+
+    /* check for null parameters */
+    if ((pRxBuff == NULL) || (pTxBuff == NULL))
+    {
+        mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+        return MV_BAD_PARAM;
+    }
+
+    /* Check that the buffer pointer and the buffer size are 16bit aligned */
+    if ((((MV_U32)buffSize & 1) == 0) && (((MV_U32)pTxBuff & 1) == 0) && (((MV_U32)pRxBuff & 1) == 0))
+    {
+	/* Verify that the SPI mode is in 16bit mode */
+	MV_REG_BIT_SET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK);
+
+	/* TX/RX as long we have complete 16bit chunks */
+	while (bytesLeft >= MV_SPI_16_BIT_CHUNK_SIZE)
+	{
+        /* Transmitted and wait for the transfer to be completed */
+		if ((ret = mvSpi16bitDataTxRx(*txPtr, rxPtr)) != MV_OK)
+			return ret;
+
+		/* increment the pointers */
+		txPtr++;
+		rxPtr++;
+		bytesLeft -= MV_SPI_16_BIT_CHUNK_SIZE;
+	}
+    }
+    else
+    {
+	/* Verify that the SPI mode is in 8bit mode */
+	MV_REG_BIT_RESET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK);
+
+	/* TX/RX in 8bit chanks */
+	while (bytesLeft > 0)
+	{
+		/* Transmitted and wait for the transfer to be completed */
+		if ( (ret = mvSpi8bitDataTxRx(*pTxBuff, pRxBuff) ) != MV_OK)
+			return ret;
+		pRxBuff++;
+		pTxBuff++;
+		bytesLeft--;
+	}
+    }
+
+	return MV_OK;
+}
+
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpi.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpi.h
new file mode 100644
index 0000000000..74859f03e7
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpi.h
@@ -0,0 +1,94 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvSpihH
+#define __INCmvSpihH
+
+#include "mvCommon.h"
+#include "mvOs.h"
+#include "ctrlEnv/mvCtrlEnvSpec.h"
+
+/* Function Prototypes */
+/* Init */
+MV_STATUS   mvSpiInit		(MV_U32 serialBaudRate);
+
+/* Set the Frequency of the Spi clock */
+MV_STATUS   mvSpiBaudRateSet(MV_U32 serialBaudRate);
+
+/* Assert the SPI chip select */
+MV_VOID     mvSpiCsAssert   (MV_VOID);
+
+/* De-assert the SPI chip select */
+MV_VOID     mvSpiCsDeassert (MV_VOID);
+
+/* Simultanuous Read and write */
+MV_STATUS	mvSpiReadWrite	(MV_U8* pRxBuff, MV_U8* pTxBuff, MV_U32 buffSize);
+
+/* serialize a buffer on the TX line - Rx is ignored */
+MV_STATUS	mvSpiWrite  	(MV_U8* pTxBuff, MV_U32 buffSize);
+
+/* read from the RX line by writing dummy values to the TX line */
+MV_STATUS	mvSpiRead   	(MV_U8* pRxBuff, MV_U32 buffSize);
+
+#endif /* __INCmvSpihH */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpiCmnd.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpiCmnd.c
new file mode 100644
index 0000000000..a5d5a6478b
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpiCmnd.c
@@ -0,0 +1,249 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED.  The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer.
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    *   Neither the name of Marvell nor the names of its contributors may be
+        used to endorse or promote products derived from this software without
+        specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#include "spi/mvSpi.h"
+#include "spi/mvSpiSpec.h"
+
+/*#define MV_DEBUG*/
+#ifdef MV_DEBUG
+#define DB(x) x
+#else
+#define DB(x)
+#endif
+
+
+/*******************************************************************************
+* mvSpiReadAndWrite - Read and Write a buffer simultanuousely
+*
+* DESCRIPTION:
+*       Transmit and receive a buffer over the SPI in 16bit chunks. If the
+*		buffer size is odd, then the last chunk will be 8bits.
+*
+* INPUT:
+*       pRxBuff: Pointer to the buffer to write the RX info in
+*		pTxBuff: Pointer to the buffer holding the TX info
+*		buffSize: length of both the pTxBuff and pRxBuff
+*
+* OUTPUT:
+*       pRxBuff: Pointer of the buffer holding the RX data
+*
+* RETURN:
+*       Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSpiReadAndWrite(MV_U8* pRxBuff, MV_U8* pTxBuff, MV_U32 buffSize)
+{
+    MV_STATUS ret;
+
+    /* check for null parameters */
+    if ((pRxBuff == NULL) || (pTxBuff == NULL) || (buffSize == 0))
+    {
+        mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+        return MV_BAD_PARAM;
+    }
+
+	/* First assert the chip select */
+	mvSpiCsAssert();
+
+    ret = mvSpiReadWrite(pRxBuff, pTxBuff, buffSize);
+
+	/* Finally deassert the chip select */
+	mvSpiCsDeassert();
+
+	return ret;
+}
+
+/*******************************************************************************
+* mvSpiWriteThenWrite - Serialize a command followed by the data over the TX line
+*
+* DESCRIPTION:
+*       Assert the chip select line. Transmit the command buffer followed by
+*       the data buffer. Then deassert the CS line.
+*
+* INPUT:
+*       pCmndBuff: Pointer to the command buffer to transmit
+*       cmndSize: length of the command size
+*		pTxDataBuff: Pointer to the data buffer to transmit
+*		txDataSize: length of the data buffer
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS	mvSpiWriteThenWrite (MV_U8* pCmndBuff, MV_U32 cmndSize, MV_U8* pTxDataBuff,
+                                 MV_U32 txDataSize)
+{
+    MV_STATUS ret = MV_OK, tempRet;
+
+    /* check for null parameters */
+#ifndef CONFIG_MARVELL
+    if(NULL == pTxDataBuff)
+    {
+        mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+        return MV_BAD_PARAM;
+    }
+#endif
+
+    if (pCmndBuff == NULL)
+    {
+        mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+        return MV_BAD_PARAM;
+    }
+
+	/* First assert the chip select */
+	mvSpiCsAssert();
+
+    /* first write the command */
+    if ((cmndSize) && (pCmndBuff != NULL))
+    {
+        if ((tempRet = mvSpiWrite(pCmndBuff, cmndSize)) != MV_OK)
+            ret = tempRet;
+    }
+
+    /* Then write the data buffer */
+#ifndef CONFIG_MARVELL
+    if (txDataSize)
+#else
+    if ((txDataSize) && (pTxDataBuff != NULL))
+#endif
+    {
+        if ((tempRet = mvSpiWrite(pTxDataBuff, txDataSize)) != MV_OK)
+            ret = tempRet;
+    }
+
+	/* Finally deassert the chip select */
+	mvSpiCsDeassert();
+
+	return ret;
+}
+
+/*******************************************************************************
+* mvSpiWriteThenRead - Serialize a command then read a data buffer
+*
+* DESCRIPTION:
+*       Assert the chip select line. Transmit the command buffer then read
+*       the data buffer. Then deassert the CS line.
+*
+* INPUT:
+*       pCmndBuff: Pointer to the command buffer to transmit
+*       cmndSize: length of the command size
+*		pRxDataBuff: Pointer to the buffer to read the data in
+*		txDataSize: length of the data buffer
+*
+* OUTPUT:
+*		pRxDataBuff: Pointer to the buffer holding the data
+*
+* RETURN:
+*       Success or Error code.
+*
+*
+*******************************************************************************/
+MV_STATUS mvSpiWriteThenRead (MV_U8* pCmndBuff, MV_U32 cmndSize, MV_U8* pRxDataBuff,
+                              MV_U32 rxDataSize,MV_U32 dummyBytesToRead)
+{
+    MV_STATUS ret = MV_OK, tempRet;
+    MV_U8   dummyByte;
+
+    /* check for null parameters */
+    if ((pCmndBuff == NULL) && (pRxDataBuff == NULL))
+    {
+        mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__);
+        return MV_BAD_PARAM;
+    }
+
+	/* First assert the chip select */
+	mvSpiCsAssert();
+
+    /* first write the command */
+    if ((cmndSize) && (pCmndBuff != NULL))
+    {
+        if ((tempRet = mvSpiWrite(pCmndBuff, cmndSize)) != MV_OK)
+            ret = tempRet;
+    }
+
+    /* Read dummy bytes before real data.   */
+    while(dummyBytesToRead)
+    {
+        mvSpiRead(&dummyByte,1);
+        dummyBytesToRead--;
+    }
+
+    /* Then write the data buffer */
+    if ((rxDataSize) && (pRxDataBuff != NULL))
+    {
+        if ((tempRet = mvSpiRead(pRxDataBuff, rxDataSize)) != MV_OK)
+            ret = tempRet;
+    }
+
+	/* Finally deassert the chip select */
+	mvSpiCsDeassert();
+
+	return ret;
+}
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpiCmnd.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpiCmnd.h
new file mode 100644
index 0000000000..329e26b7c0
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpiCmnd.h
@@ -0,0 +1,82 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED.  The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer.
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    *   Neither the name of Marvell nor the names of its contributors may be
+        used to endorse or promote products derived from this software without
+        specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvSpiCmndhH
+#define __INCmvSpiCmndhH
+
+#include "mvTypes.h"
+
+/* Function Prototypes */
+
+/* Simultanuous Read and write */
+MV_STATUS	mvSpiReadAndWrite	(MV_U8* pRxBuff, MV_U8* pTxBuff, MV_U32 buffSize);
+
+/* write command - write a command and then write data */
+MV_STATUS	mvSpiWriteThenWrite (MV_U8* pCmndBuff, MV_U32 cmndSize, MV_U8* pTxDataBuff, MV_U32 txDataSize);
+
+/* read command - write a command and then read data by writing dummy data */
+MV_STATUS mvSpiWriteThenRead (MV_U8* pCmndBuff, MV_U32 cmndSize, MV_U8* pRxDataBuff,
+                              MV_U32 rxDataSize,MV_U32 dummyBytesToRead);
+
+#endif /* __INCmvSpiCmndhH */
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpiSpec.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpiSpec.h
new file mode 100644
index 0000000000..658159abbb
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpiSpec.h
@@ -0,0 +1,98 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#ifndef __INCmvSpiSpecH
+#define __INCmvSpiSpecH
+
+/* Constants */
+#define		MV_SPI_WAIT_RDY_MAX_LOOP			100000
+#define		MV_SPI_16_BIT_CHUNK_SIZE			2
+#define		MV_SPI_DUMMY_WRITE_16BITS			0xFFFF
+#define		MV_SPI_DUMMY_WRITE_8BITS			0xFF
+
+/* Marvell Flash Device Controller Registers */
+#define		MV_SPI_CTRLR_OFST					0x10600
+#define		MV_SPI_IF_CTRL_REG					(MV_SPI_CTRLR_OFST + 0x00)
+#define		MV_SPI_IF_CONFIG_REG				(MV_SPI_CTRLR_OFST + 0x04)
+#define		MV_SPI_DATA_OUT_REG					(MV_SPI_CTRLR_OFST + 0x08)
+#define		MV_SPI_DATA_IN_REG					(MV_SPI_CTRLR_OFST + 0x0c)
+#define		MV_SPI_INT_CAUSE_REG				(MV_SPI_CTRLR_OFST + 0x10)
+#define		MV_SPI_INT_CAUSE_MASK_REG			(MV_SPI_CTRLR_OFST + 0x14)
+
+/* Serial Memory Interface Control Register Masks */
+#define		MV_SPI_CS_ENABLE_OFFSET				0		/* bit 0 */
+#define		MV_SPI_MEMORY_READY_OFFSET			1		/* bit 1 */
+#define		MV_SPI_CS_ENABLE_MASK				(0x1  << MV_SPI_CS_ENABLE_OFFSET)
+#define		MV_SPI_MEMORY_READY_MASK			(0x1  << MV_SPI_MEMORY_READY_OFFSET)
+
+/* Serial Memory Interface Configuration Register Masks */
+#define		MV_SPI_CLK_PRESCALE_OFFSET			0		/* bit 0-4 */
+#define		MV_SPI_BYTE_LENGTH_OFFSET			5		/* bit 5 */
+#define		MV_SPI_ADDRESS_BURST_LENGTH_OFFSET  8	    /* bit 8-9 */
+#define		MV_SPI_CLK_PRESCALE_MASK			(0x1F << MV_SPI_CLK_PRESCALE_OFFSET)
+#define		MV_SPI_BYTE_LENGTH_MASK				(0x1  << MV_SPI_BYTE_LENGTH_OFFSET)
+#define		MV_SPI_ADDRESS_BURST_LENGTH_MASK	(0x3  << MV_SPI_ADDRESS_BURST_LENGTH_OFFSET)
+
+#endif /* __INCmvSpiSpecH */
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsi.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsi.c
new file mode 100644
index 0000000000..0bf8b7571b
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsi.c
@@ -0,0 +1,1023 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File in accordance with the terms and conditions of the General
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is
+available along with the File in the license.txt file or by writing to the Free
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
+DISCLAIMED.  The GPL License provides additional details about this warranty
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer.
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    *   Neither the name of Marvell nor the names of its contributors may be
+        used to endorse or promote products derived from this software without
+        specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+
+#include "mvTwsi.h"
+#include "mvTwsiSpec.h"
+#include "cpu/mvCpu.h"
+
+
+/*#define MV_DEBUG*/
+#ifdef MV_DEBUG
+#define DB(x) x
+#else
+#define DB(x)
+#endif
+
+static MV_VOID twsiIntFlgClr(MV_U8 chanNum);
+static MV_BOOL twsiMainIntGet(MV_U8 chanNum);
+static MV_VOID twsiAckBitSet(MV_U8 chanNum);
+static MV_U32 twsiStsGet(MV_U8 chanNum);
+static MV_VOID twsiReset(MV_U8 chanNum);
+static MV_STATUS twsiAddr7BitSet(MV_U8 chanNum, MV_U32 deviceAddress,MV_TWSI_CMD command);
+static MV_STATUS twsiAddr10BitSet(MV_U8 chanNum, MV_U32 deviceAddress,MV_TWSI_CMD command);
+static MV_STATUS twsiDataTransmit(MV_U8 chanNum, MV_U8 *pBlock, MV_U32 blockSize);
+static MV_STATUS twsiDataReceive(MV_U8 chanNum, MV_U8 *pBlock, MV_U32 blockSize);
+static MV_STATUS twsiTargetOffsSet(MV_U8 chanNum, MV_U32 offset,MV_BOOL moreThen256);
+
+
+static MV_BOOL twsiTimeoutChk(MV_U32 timeout, const MV_8 *pString)
+{
+	if(timeout >= TWSI_TIMEOUT_VALUE)
+	{
+		DB(mvOsPrintf("%s",pString));
+		return MV_TRUE;
+	}
+	return MV_FALSE;
+	
+}
+/*******************************************************************************
+* mvTwsiStartBitSet - Set start bit on the bus
+*
+* DESCRIPTION:
+*       This routine sets the start bit on the TWSI bus. 
+*       The routine first checks for interrupt flag condition, then it sets 
+*       the start bit  in the TWSI Control register. 
+*       If the interrupt flag condition check previously was set, the function 
+*       will clear it.
+*       The function then wait for the start bit to be cleared by the HW. 
+*       Then it waits for the interrupt flag to be set and eventually, the 
+*       TWSI status is checked to be 0x8 or 0x10(repeated start bit).
+*
+* INPUT:
+*       chanNum - TWSI channel.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_OK is start bit was set successfuly on the bus.
+*       MV_FAIL if interrupt flag was set before setting start bit.
+*
+*******************************************************************************/
+MV_STATUS mvTwsiStartBitSet(MV_U8 chanNum)
+{
+	MV_BOOL isIntFlag = MV_FALSE;
+	MV_U32 timeout, temp;
+
+	DB(mvOsPrintf("TWSI: mvTwsiStartBitSet \n"));
+	/* check Int flag */
+    	if(twsiMainIntGet(chanNum))
+		isIntFlag = MV_TRUE;
+	/* set start Bit */
+    	temp = MV_REG_READ(TWSI_CONTROL_REG(chanNum));
+	MV_REG_WRITE(TWSI_CONTROL_REG(chanNum), temp | TWSI_CONTROL_START_BIT);
+	
+	/* in case that the int flag was set before i.e. repeated start bit */
+	if(isIntFlag){
+		DB(mvOsPrintf("TWSI: mvTwsiStartBitSet repeated start Bit\n"));
+		twsiIntFlgClr(chanNum);
+	}
+	
+   	/* wait for interrupt */
+	timeout = 0;
+	while(!twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE));
+	
+	/* check for timeout */	
+	if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: mvTwsiStartBitSet ERROR - Start Clear bit TimeOut .\n"))
+		return MV_TIMEOUT;
+
+
+	/* check that start bit went down */
+	if((MV_REG_READ(TWSI_CONTROL_REG(chanNum)) & TWSI_CONTROL_START_BIT) != 0)
+	{
+		mvOsPrintf("TWSI: mvTwsiStartBitSet ERROR - start bit didn't went down\n");
+		return MV_FAIL;
+	}	
+
+	/* check the status */
+	temp = twsiStsGet(chanNum);
+	if(( temp != TWSI_START_CON_TRA ) && ( temp != TWSI_REPEATED_START_CON_TRA ))
+	  {
+		mvOsPrintf("TWSI: mvTwsiStartBitSet ERROR - status %x after Set Start Bit. \n",temp);
+		return MV_FAIL;
+	}
+
+	return MV_OK;	
+
+}
+
+/*******************************************************************************
+* mvTwsiStopBitSet - Set stop bit on the bus
+*
+* DESCRIPTION:
+*       This routine set the stop bit on the TWSI bus. 
+*       The function then wait for the stop bit to be cleared by the HW. 
+*       Finally the function checks for status of 0xF8.
+*
+* INPUT:
+*	chanNum - TWSI channel
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_TRUE is stop bit was set successfuly on the bus.
+*
+*******************************************************************************/
+MV_STATUS mvTwsiStopBitSet(MV_U8 chanNum)
+{
+    	MV_U32	timeout, temp;
+
+    	/* Generate stop bit */
+	temp = MV_REG_READ(TWSI_CONTROL_REG(chanNum));
+    	MV_REG_WRITE(TWSI_CONTROL_REG(chanNum), temp | TWSI_CONTROL_STOP_BIT);
+
+	twsiIntFlgClr(chanNum);
+		
+   	/* wait for stop bit to come down */
+	timeout = 0;
+	while( ((MV_REG_READ(TWSI_CONTROL_REG(chanNum)) & TWSI_CONTROL_STOP_BIT) != 0) && (timeout++ < TWSI_TIMEOUT_VALUE));
+
+	/* check for timeout */
+	if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: mvTwsiStopBitSet ERROR - Stop bit TimeOut .\n"))
+		return MV_TIMEOUT;
+	
+	/* check that the stop bit went down */
+	if((MV_REG_READ(TWSI_CONTROL_REG(chanNum)) & TWSI_CONTROL_STOP_BIT) != 0)	
+	{
+		mvOsPrintf("TWSI: mvTwsiStopBitSet ERROR - stop bit didn't went down. \n");
+		return MV_FAIL;
+	}
+	
+	/* check the status */
+	temp = twsiStsGet(chanNum);
+	if( temp != TWSI_NO_REL_STS_INT_FLAG_IS_KEPT_0){
+		mvOsPrintf("TWSI: mvTwsiStopBitSet ERROR - status %x after Stop Bit. \n", temp);
+		return MV_FAIL;
+	}
+
+	return MV_OK;
+}
+
+/*******************************************************************************
+* twsiMainIntGet - Get twsi bit from main Interrupt cause.
+*
+* DESCRIPTION:
+*       This routine returns the twsi interrupt flag value.
+*       
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_TRUE is interrupt flag is set, MV_FALSE otherwise.
+*
+*******************************************************************************/
+static MV_BOOL twsiMainIntGet(MV_U8 chanNum)
+{
+	MV_U32 temp;
+	
+	/* get the int flag bit */
+
+	temp = MV_REG_READ(TWSI_CPU_MAIN_INT_CAUSE_REG);
+	if (temp & (TWSI0_CPU_MAIN_INT_BIT << chanNum))
+	    return MV_TRUE;
+    
+	return MV_FALSE;
+}
+/*******************************************************************************
+* twsiIntFlgClr - Clear Interrupt flag.
+*
+* DESCRIPTION:
+*       This routine clears the interrupt flag. It does NOT poll the interrupt
+*       to make sure the clear. After clearing the interrupt, it waits for at 
+*       least 1 miliseconds.
+*
+* INPUT:
+*	chanNum - TWSI channel
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+static MV_VOID twsiIntFlgClr(MV_U8 chanNum)
+{
+	MV_U32 temp;
+
+	/* wait for 1 mili to prevent TWSI register write after write problems */
+   	mvOsDelay(1);
+	/* clear the int flag bit */
+	temp = MV_REG_READ(TWSI_CONTROL_REG(chanNum));
+    	MV_REG_WRITE(TWSI_CONTROL_REG(chanNum),temp & ~(TWSI_CONTROL_INT_FLAG_SET));
+
+	/* wait for 1 mili sec for the clear to take effect */
+   	mvOsDelay(1);
+	
+	return;
+}
+
+
+/*******************************************************************************
+* twsiAckBitSet - Set acknowledge bit on the bus
+*
+* DESCRIPTION:
+*       This routine set the acknowledge bit on the TWSI bus.
+*
+* INPUT:
+*       None.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None.
+*
+*******************************************************************************/
+static MV_VOID twsiAckBitSet(MV_U8 chanNum)
+{
+	MV_U32 temp;
+
+	/*Set the Ack bit */
+	temp = MV_REG_READ(TWSI_CONTROL_REG(chanNum));
+    	MV_REG_WRITE(TWSI_CONTROL_REG(chanNum), temp | TWSI_CONTROL_ACK);
+
+	/* Add delay of 1ms */
+	mvOsDelay(1);
+	return;
+}
+
+
+/*******************************************************************************
+* twsiInit - Initialize TWSI interface
+*
+* DESCRIPTION:
+*       This routine:
+*	-Reset the TWSI.
+*	-Initialize the TWSI clock baud rate according to given frequancy
+*	 parameter based on Tclk frequancy and enables TWSI slave.
+*       -Set the ack bit.
+*	-Assign the TWSI slave address according to the TWSI address Type.
+*       
+*
+* INPUT:
+*	chanNum - TWSI channel
+*       frequancy - TWSI frequancy in KHz. (up to 100KHZ)
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       Actual frequancy.
+*
+*******************************************************************************/
+MV_U32 mvTwsiInit(MV_U8 chanNum, MV_HZ frequancy, MV_U32 Tclk, MV_TWSI_ADDR *pTwsiAddr, MV_BOOL generalCallEnable)
+{
+    	MV_U32	n,m,freq,margin,minMargin = 0xffffffff;
+	MV_U32	power;
+    	MV_U32	actualFreq = 0,actualN = 0,actualM = 0,val;
+
+	if(frequancy > 100000)
+	{
+		mvOsPrintf("Warning TWSI frequancy is too high, please use up tp 100Khz. \n");
+	}
+
+	DB(mvOsPrintf("TWSI: mvTwsiInit - Tclk = %d freq = %d\n",Tclk,frequancy));
+    	/* Calucalte N and M for the TWSI clock baud rate */
+    	for(n = 0 ; n < 8 ; n++)
+    	{
+        	for(m = 0 ; m < 16 ; m++)
+        	{
+            		power = 2 << n; /* power = 2^(n+1) */
+            		freq = Tclk/(10*(m+1)*power);
+            		margin = MV_ABS(frequancy - freq);
+            		if(margin < minMargin)
+            		{
+                		minMargin   = margin;
+                		actualFreq  = freq;
+                		actualN     = n;
+                		actualM     = m;
+            		}
+        	}
+		}
+	DB(mvOsPrintf("TWSI: mvTwsiInit - actN %d actM %d actFreq %d\n",actualN , actualM, actualFreq));
+	/* Reset the TWSI logic */
+	twsiReset(chanNum);
+
+	/* Set the baud rate */
+	val = ((actualM<< TWSI_BAUD_RATE_M_OFFS) | actualN << TWSI_BAUD_RATE_N_OFFS);
+    	MV_REG_WRITE(TWSI_STATUS_BAUDE_RATE_REG(chanNum),val);
+
+    	/* Enable the TWSI and slave */
+	MV_REG_WRITE(TWSI_CONTROL_REG(chanNum), TWSI_CONTROL_ENA | TWSI_CONTROL_ACK); 
+
+	/* set the TWSI slave address */
+	if( pTwsiAddr->type == ADDR10_BIT )/* 10 Bit deviceAddress */
+    	{
+		/* writing the 2 most significant bits of the 10 bit address*/
+		val = ((pTwsiAddr->address & TWSI_SLAVE_ADDR_10BIT_MASK) >> TWSI_SLAVE_ADDR_10BIT_OFFS );
+		/* bits 7:3 must be 0x11110 */
+		val |= TWSI_SLAVE_ADDR_10BIT_CONST;
+		/* set GCE bit */
+		if(generalCallEnable)
+			val |= TWSI_SLAVE_ADDR_GCE_ENA;
+		/* write slave address */
+		MV_REG_WRITE(TWSI_SLAVE_ADDR_REG(chanNum),val);
+
+         	/* writing the 8 least significant bits of the 10 bit address*/
+        	val = (pTwsiAddr->address << TWSI_EXTENDED_SLAVE_OFFS) & TWSI_EXTENDED_SLAVE_MASK;  
+        	MV_REG_WRITE(TWSI_EXTENDED_SLAVE_ADDR_REG(chanNum), val);
+    	}
+    	else /*7 bit address*/
+    	{
+		/* set the 7 Bits address */
+        	MV_REG_WRITE(TWSI_EXTENDED_SLAVE_ADDR_REG(chanNum),0x0);
+		val = (pTwsiAddr->address << TWSI_SLAVE_ADDR_7BIT_OFFS) & TWSI_SLAVE_ADDR_7BIT_MASK;
+        	MV_REG_WRITE(TWSI_SLAVE_ADDR_REG(chanNum), val);
+    	}
+
+	/* unmask twsi int */
+    val = MV_REG_READ(TWSI_CONTROL_REG(chanNum));
+	MV_REG_WRITE(TWSI_CONTROL_REG(chanNum), val | TWSI_CONTROL_INT_ENA);
+	/* Add delay of 1ms */
+	mvOsDelay(1);
+	
+   return actualFreq;
+} 
+
+
+/*******************************************************************************
+* twsiStsGet - Get the TWSI status value.
+*
+* DESCRIPTION:
+*       This routine returns the TWSI status value.
+*
+* INPUT:
+*	chanNum - TWSI channel
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_U32 - the TWSI status.
+*
+*******************************************************************************/
+static MV_U32 twsiStsGet(MV_U8 chanNum)
+{
+    return MV_REG_READ(TWSI_STATUS_BAUDE_RATE_REG(chanNum));
+
+}
+
+/*******************************************************************************
+* twsiReset - Reset the TWSI.
+*
+* DESCRIPTION:
+*       Resets the TWSI logic and sets all TWSI registers to their reset values.
+*
+* INPUT:
+*      chanNum - TWSI channel
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       None
+*
+*******************************************************************************/
+static MV_VOID twsiReset(MV_U8 chanNum)
+{
+    	/* Reset the TWSI logic */
+    	MV_REG_WRITE(TWSI_SOFT_RESET_REG(chanNum),0);
+
+	/* wait for 2 mili sec */
+   	mvOsDelay(2);
+
+	return;
+}
+
+
+
+
+/******************************* POLICY ****************************************/
+
+
+
+/*******************************************************************************
+* mvTwsiAddrSet - Set address on TWSI bus.
+*
+* DESCRIPTION:
+*       This function Set address (7 or 10 Bit address) on the Twsi Bus.
+*
+* INPUT:
+*	chanNum - TWSI channel
+*       pTwsiAddr - twsi address.
+*	command	 - read / write .
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_OK - if setting the address completed succesfully.
+*	MV_FAIL otherwmise.
+*
+*******************************************************************************/
+MV_STATUS mvTwsiAddrSet(MV_U8 chanNum, MV_TWSI_ADDR *pTwsiAddr, MV_TWSI_CMD command)
+{
+	DB(mvOsPrintf("TWSI: mvTwsiAddr7BitSet addr %x , type %d, cmd is %s\n",pTwsiAddr->address,\
+		 			pTwsiAddr->type, ((command==MV_TWSI_WRITE)?"Write":"Read") ));
+	/* 10 Bit address */
+	if(pTwsiAddr->type == ADDR10_BIT)
+	{
+		return twsiAddr10BitSet(chanNum, pTwsiAddr->address,command);
+	}
+	/* 7 Bit address */
+	else
+	{
+		return twsiAddr7BitSet(chanNum, pTwsiAddr->address,command);
+	}
+
+}
+
+/*******************************************************************************
+* twsiAddr10BitSet - Set 10 Bit address on TWSI bus.
+*
+* DESCRIPTION:
+*       There are two address phases:
+*       1) Write '11110' to data register bits [7:3] and 10-bit address MSB 
+*          (bits [9:8]) to data register bits [2:1] plus a write(0) or read(1) bit 
+*          to the Data register. Then it clears interrupt flag which drive 
+*          the address on the TWSI bus. The function then waits for interrupt 
+*          flag to be active and status 0x18 (write) or 0x40 (read) to be set.
+*       2) write the rest of 10-bit address to data register and clears 
+*          interrupt flag which drive the address on the TWSI bus. The 
+*          function then waits for interrupt flag to be active and status 
+*          0xD0 (write) or 0xE0 (read) to be set. 
+*
+* INPUT:
+*	chanNum - TWSI channel
+*       deviceAddress - twsi address.
+*	command	 - read / write .
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_OK - if setting the address completed succesfully.
+*	MV_FAIL otherwmise.
+*
+*******************************************************************************/
+static MV_STATUS twsiAddr10BitSet(MV_U8 chanNum, MV_U32 deviceAddress,MV_TWSI_CMD command)
+{
+	MV_U32 val,timeout;
+
+	/* writing the 2 most significant bits of the 10 bit address*/
+	val = ((deviceAddress & TWSI_DATA_ADDR_10BIT_MASK) >> TWSI_DATA_ADDR_10BIT_OFFS );
+	/* bits 7:3 must be 0x11110 */
+	val |= TWSI_DATA_ADDR_10BIT_CONST;
+	/* set command */
+	val |= command;
+	MV_REG_WRITE(TWSI_DATA_REG(chanNum), val);
+	/* WA add a delay */
+	mvOsDelay(1);
+
+	/* clear Int flag */
+	twsiIntFlgClr(chanNum);
+
+	/* wait for Int to be Set */
+	timeout = 0;
+	while( !twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE));
+
+	/* check for timeout */
+	if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiAddr10BitSet ERROR - 1st addr (10Bit) Int TimeOut.\n"))
+		return MV_TIMEOUT;
+	
+	/* check the status */
+	val = twsiStsGet(chanNum);
+	if(( (val != TWSI_AD_PLS_RD_BIT_TRA_ACK_REC) && (command == MV_TWSI_READ ) ) || 
+	   ( (val != TWSI_AD_PLS_WR_BIT_TRA_ACK_REC) && (command == MV_TWSI_WRITE) ))
+	{
+		mvOsPrintf("TWSI: twsiAddr10BitSet ERROR - status %x 1st addr (10 Bit) in %s mode.\n"\
+						,val, ((command==MV_TWSI_WRITE)?"Write":"Read") );
+		return MV_FAIL;
+	}
+
+	/* set 	8 LSB of the address */
+	val = (deviceAddress << TWSI_DATA_ADDR_7BIT_OFFS) & TWSI_DATA_ADDR_7BIT_MASK;
+	MV_REG_WRITE(TWSI_DATA_REG(chanNum), val);
+
+	/* clear Int flag */
+	twsiIntFlgClr(chanNum);
+
+	/* wait for Int to be Set */
+	timeout = 0;
+	while( !twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE));
+
+	/* check for timeout */
+	if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiAddr10BitSet ERROR - 2nd (10 Bit) Int TimOut.\n"))
+		return MV_TIMEOUT;
+	
+	/* check the status */
+	val = twsiStsGet(chanNum);
+	if(( (val != TWSI_SEC_AD_PLS_RD_BIT_TRA_ACK_REC) && (command == MV_TWSI_READ ) ) || 
+	   ( (val != TWSI_SEC_AD_PLS_WR_BIT_TRA_ACK_REC) && (command == MV_TWSI_WRITE) ))
+	{
+		mvOsPrintf("TWSI: twsiAddr10BitSet ERROR - status %x 2nd addr(10 Bit) in %s mode.\n"\
+						,val, ((command==MV_TWSI_WRITE)?"Write":"Read") );
+		return MV_FAIL;
+	}
+	
+	return MV_OK;
+}
+
+/*******************************************************************************
+* twsiAddr7BitSet - Set 7 Bit address on TWSI bus.
+*
+* DESCRIPTION:
+*       This function writes 7 bit address plus a write or read bit to the 
+*       Data register. Then it clears interrupt flag which drive the address on 
+*       the TWSI bus. The function then waits for interrupt flag to be active
+*       and status 0x18 (write) or 0x40 (read) to be set.
+*
+* INPUT:
+*	chanNum - TWSI channel
+*       deviceAddress - twsi address.
+*	command	 - read / write .
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_OK - if setting the address completed succesfully.
+*	MV_FAIL otherwmise.
+*
+*******************************************************************************/
+static MV_STATUS twsiAddr7BitSet(MV_U8 chanNum, MV_U32 deviceAddress,MV_TWSI_CMD command)
+{
+	MV_U32 val,timeout;
+
+	/* set the address */
+	val = (deviceAddress << TWSI_DATA_ADDR_7BIT_OFFS) & TWSI_DATA_ADDR_7BIT_MASK;
+	/* set command */
+	val |= command;	
+	MV_REG_WRITE(TWSI_DATA_REG(chanNum), val);
+	/* WA add a delay */
+	mvOsDelay(1);
+
+	/* clear Int flag */
+	twsiIntFlgClr(chanNum);
+
+	/* wait for Int to be Set */
+	timeout = 0;
+	while( !twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE));
+
+	/* check for timeout */
+	if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiAddr7BitSet ERROR - Addr (7 Bit) int TimeOut.\n"))
+		return MV_TIMEOUT;
+	
+	/* check the status */
+	val = twsiStsGet(chanNum);
+	if(( (val != TWSI_AD_PLS_RD_BIT_TRA_ACK_REC) && (command == MV_TWSI_READ ) ) || 
+	   ( (val != TWSI_AD_PLS_WR_BIT_TRA_ACK_REC) && (command == MV_TWSI_WRITE) ))
+	{
+		/* only in debug, since in boot we try to read the SPD of both DRAM, and we don't
+			want error messeges in case DIMM doesn't exist. */
+		DB(mvOsPrintf("TWSI: twsiAddr7BitSet ERROR - status %x addr (7 Bit) in %s mode.\n"\
+						,val,((command==MV_TWSI_WRITE)?"Write":"Read") ));
+		return MV_FAIL;
+	}
+	
+	return MV_OK;
+}
+
+/*******************************************************************************
+* twsiDataWrite - Trnasmit a data block over TWSI bus.
+*
+* DESCRIPTION:
+*       This function writes a given data block to TWSI bus in 8 bit granularity.
+*	first The function waits for interrupt flag to be active then
+*       For each 8-bit data:
+*        The function writes data to data register. It then clears 
+*        interrupt flag which drives the data on the TWSI bus. 
+*        The function then waits for interrupt flag to be active and status 
+*        0x28 to be set. 
+*      
+*
+* INPUT:
+*	chanNum - TWSI channel
+*       pBlock - Data block.
+*	blockSize - number of chars in pBlock.
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_OK - if transmiting the block completed succesfully,
+*	MV_BAD_PARAM - if pBlock is NULL,
+*	MV_FAIL otherwmise.
+*
+*******************************************************************************/
+static MV_STATUS twsiDataTransmit(MV_U8 chanNum, MV_U8 *pBlock, MV_U32 blockSize)
+{
+	MV_U32 timeout, temp, blockSizeWr = blockSize;
+
+	if(NULL == pBlock)
+		return MV_BAD_PARAM;
+
+	/* wait for Int to be Set */
+	timeout = 0;
+	while( !twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE));
+
+	/* check for timeout */
+	if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiDataTransmit ERROR - Read Data Int TimeOut.\n"))
+		return MV_TIMEOUT;
+
+	while(blockSizeWr)
+	{
+		/* write the data*/
+		MV_REG_WRITE(TWSI_DATA_REG(chanNum),(MV_U32)*pBlock);
+		DB(mvOsPrintf("TWSI: twsiDataTransmit place = %d write %x \n",\
+						blockSize - blockSizeWr, *pBlock));
+		pBlock++;
+		blockSizeWr--;
+
+		twsiIntFlgClr(chanNum);
+
+		/* wait for Int to be Set */
+		timeout = 0;
+		while( !twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE));
+
+		/* check for timeout */
+		if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiDataTransmit ERROR - Read Data Int TimeOut.\n"))
+			return MV_TIMEOUT;
+
+		/* check the status */
+		temp = twsiStsGet(chanNum);
+		if(temp != TWSI_M_TRAN_DATA_BYTE_ACK_REC) 
+		{
+			mvOsPrintf("TWSI: twsiDataTransmit ERROR - status %x in write trans\n",temp);
+			return MV_FAIL;
+		}
+		
+	}
+
+	return MV_OK;
+}
+
+/*******************************************************************************
+* twsiDataReceive - Receive data block from TWSI bus.
+*
+* DESCRIPTION:
+*       This function receive data block from TWSI bus in 8bit granularity 
+*       into pBlock buffer.
+*	first The function waits for interrupt flag to be active then
+*       For each 8-bit data:
+*        It clears the interrupt flag which allows the next data to be 
+*        received from TWSI bus.
+*	 The function waits for interrupt flag to be active,
+*	 and status reg is 0x50. 
+*	 Then the function reads data from data register, and copies it to 
+*	 the given buffer. 
+*
+* INPUT:
+*	chanNum - TWSI channel
+*       blockSize - number of bytes to read.
+*
+* OUTPUT:
+*       pBlock - Data block.
+*
+* RETURN:
+*       MV_OK - if receive transaction completed succesfully,
+*	MV_BAD_PARAM - if pBlock is NULL,
+*	MV_FAIL otherwmise.
+*
+*******************************************************************************/
+static MV_STATUS twsiDataReceive(MV_U8 chanNum, MV_U8 *pBlock, MV_U32 blockSize)
+{
+	MV_U32 timeout, temp, blockSizeRd = blockSize;
+	if(NULL == pBlock)
+		return MV_BAD_PARAM;
+
+	/* wait for Int to be Set */
+	timeout = 0;
+	while( !twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE));
+
+	/* check for timeout */
+	if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiDataReceive ERROR - Read Data int Time out .\n"))
+		return MV_TIMEOUT;
+
+	while(blockSizeRd)
+	{
+		if(blockSizeRd == 1)
+		{
+			/* clear ack and Int flag */
+			temp = MV_REG_READ(TWSI_CONTROL_REG(chanNum));
+			temp &=  ~(TWSI_CONTROL_ACK);
+			MV_REG_WRITE(TWSI_CONTROL_REG(chanNum), temp);
+		}
+		twsiIntFlgClr(chanNum);
+		/* wait for Int to be Set */
+		timeout = 0;
+		while( (!twsiMainIntGet(chanNum)) && (timeout++ < TWSI_TIMEOUT_VALUE));
+
+		/* check for timeout */
+		if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiDataReceive ERROR - Read Data Int Time out .\n"))
+			return MV_TIMEOUT;
+
+		/* check the status */
+		temp = twsiStsGet(chanNum);
+		if((temp != TWSI_M_REC_RD_DATA_ACK_TRA) && (blockSizeRd !=1))
+		{
+			mvOsPrintf("TWSI: twsiDataReceive ERROR - status %x in read trans \n",temp);
+			return MV_FAIL;
+		}
+		else if((temp != TWSI_M_REC_RD_DATA_ACK_NOT_TRA) && (blockSizeRd ==1))
+		{
+			mvOsPrintf("TWSI: twsiDataReceive ERROR - status %x in Rd Terminate\n",temp);
+			return MV_FAIL;
+		}
+		
+		/* read the data*/
+		*pBlock = (MV_U8)MV_REG_READ(TWSI_DATA_REG(chanNum));
+		DB(mvOsPrintf("TWSI: twsiDataReceive  place %d read %x \n",\
+						blockSize - blockSizeRd,*pBlock));
+		pBlock++;
+		blockSizeRd--;
+	}
+
+	return MV_OK;
+}
+
+
+
+/*******************************************************************************
+* twsiTargetOffsSet - Set TWST target offset on TWSI bus.
+*
+* DESCRIPTION:
+*       The function support TWSI targets that have inside address space (for
+*       example EEPROMs). The function:
+*       1) Convert the given offset into pBlock and size.
+*		in case the offset should be set to a TWSI slave which support 
+*		more then 256 bytes offset, the offset setting will be done
+*		in 2 transactions.
+*       2) Use twsiDataTransmit to place those on the bus.
+*
+* INPUT:
+*	chanNum - TWSI channel
+*       offset - offset to be set on the EEPROM device.
+*	moreThen256 - whether the EEPROM device support more then 256 byte offset. 
+*
+* OUTPUT:
+*       None.
+*
+* RETURN:
+*       MV_OK - if setting the offset completed succesfully.
+*	MV_FAIL otherwmise.
+*
+*******************************************************************************/
+static MV_STATUS twsiTargetOffsSet(MV_U8 chanNum, MV_U32 offset, MV_BOOL moreThen256)
+{
+	MV_U8 offBlock[2];
+	MV_U32 offSize;
+
+	if(moreThen256 == MV_TRUE)
+	{
+		offBlock[0] = (offset >> 8) & 0xff;
+		offBlock[1] = offset & 0xff;
+		offSize = 2;
+	}
+	else
+	{
+		offBlock[0] = offset & 0xff;
+		offSize = 1;
+	}
+	DB(mvOsPrintf("TWSI: twsiTargetOffsSet offSize = %x addr1 = %x addr2 = %x\n",\
+							offSize,offBlock[0],offBlock[1]));
+	return twsiDataTransmit(chanNum, offBlock, offSize);
+
+}
+
+/*******************************************************************************
+* mvTwsiRead - Read data block from a TWSI Slave.
+*
+* DESCRIPTION:
+*       The function calls the following functions:
+*       -) mvTwsiStartBitSet();
+*	if(EEPROM device)
+*       	-) mvTwsiAddrSet(w);
+*       	-) twsiTargetOffsSet();
+*       	-) mvTwsiStartBitSet();
+*       -) mvTwsiAddrSet(r);
+*       -) twsiDataReceive();
+*       -) mvTwsiStopBitSet();
+*
+* INPUT:
+*	chanNum - TWSI channel
+*      	pTwsiSlave - Twsi Slave structure. 
+*       blockSize - number of bytes to read.	
+*
+* OUTPUT:
+*      	pBlock - Data block.
+*
+* RETURN:
+*       MV_OK - if EEPROM read transaction completed succesfully,
+* 	MV_BAD_PARAM - if pBlock is NULL,
+*	MV_FAIL otherwmise.
+*
+*******************************************************************************/
+MV_STATUS mvTwsiRead(MV_U8 chanNum, MV_TWSI_SLAVE *pTwsiSlave, MV_U8 *pBlock, MV_U32 blockSize)
+{
+	if((NULL == pBlock) || (NULL == pTwsiSlave))
+		return MV_BAD_PARAM;
+	if(MV_OK != mvTwsiStartBitSet(chanNum))
+	{
+		mvTwsiStopBitSet(chanNum);
+		 return MV_FAIL;
+	}
+	
+	DB(mvOsPrintf("TWSI: mvTwsiEepromRead after mvTwsiStartBitSet\n"));
+	
+	/* in case offset exsist (i.e. eeprom ) */
+	if(MV_TRUE == pTwsiSlave->validOffset)
+	{
+		if(MV_OK != mvTwsiAddrSet(chanNum, &(pTwsiSlave->slaveAddr), MV_TWSI_WRITE)) 
+		{
+			mvTwsiStopBitSet(chanNum);
+			return MV_FAIL;
+		} 
+		DB(mvOsPrintf("TWSI: mvTwsiEepromRead after mvTwsiAddrSet\n"));
+		if(MV_OK != twsiTargetOffsSet(chanNum, pTwsiSlave->offset, pTwsiSlave->moreThen256)) 
+		{
+			mvTwsiStopBitSet(chanNum);
+			return MV_FAIL;
+		}
+		DB(mvOsPrintf("TWSI: mvTwsiEepromRead after twsiTargetOffsSet\n"));
+		if(MV_OK != mvTwsiStartBitSet(chanNum)) 
+		{
+			mvTwsiStopBitSet(chanNum);
+			return MV_FAIL;
+		}
+		DB(mvOsPrintf("TWSI: mvTwsiEepromRead after mvTwsiStartBitSet\n"));
+	}
+	if(MV_OK != mvTwsiAddrSet(chanNum, &(pTwsiSlave->slaveAddr), MV_TWSI_READ)) 
+	{
+		mvTwsiStopBitSet(chanNum);
+		return MV_FAIL;
+	} 
+	DB(mvOsPrintf("TWSI: mvTwsiEepromRead after mvTwsiAddrSet\n"));
+	if(MV_OK != twsiDataReceive(chanNum, pBlock, blockSize))
+	{
+		mvTwsiStopBitSet(chanNum);
+		return MV_FAIL;
+	}
+	DB(mvOsPrintf("TWSI: mvTwsiEepromRead after twsiDataReceive\n"));
+
+	if(MV_OK != mvTwsiStopBitSet(chanNum))
+	{
+		return MV_FAIL;
+	}
+
+	twsiAckBitSet(chanNum);
+
+	DB(mvOsPrintf("TWSI: mvTwsiEepromRead after mvTwsiStopBitSet\n"));
+
+	return MV_OK;
+}
+
+/*******************************************************************************
+* mvTwsiWrite - Write data block to a TWSI Slave.
+*
+* DESCRIPTION:
+*       The function calls the following functions:
+*       -) mvTwsiStartBitSet();
+*       -) mvTwsiAddrSet();
+*	-)if(EEPROM device)
+*       	-) twsiTargetOffsSet();
+*       -) twsiDataTransmit();
+*       -) mvTwsiStopBitSet();
+*
+* INPUT:
+*	chanNum - TWSI channel
+*      	eepromAddress - eeprom address. 
+*       blockSize - number of bytes to write.	
+*      	pBlock - Data block.
+*
+* OUTPUT:
+*	None
+*
+* RETURN:
+*       MV_OK - if EEPROM read transaction completed succesfully.
+*	MV_BAD_PARAM - if pBlock is NULL,
+*	MV_FAIL otherwmise.
+*
+* NOTE: Part of the EEPROM, required that the offset will be aligned to the
+*	max write burst supported.
+*******************************************************************************/
+MV_STATUS mvTwsiWrite(MV_U8 chanNum, MV_TWSI_SLAVE *pTwsiSlave, MV_U8 *pBlock, MV_U32 blockSize)
+{
+	if((NULL == pBlock) || (NULL == pTwsiSlave))
+		return MV_BAD_PARAM;
+
+	if(MV_OK != mvTwsiStartBitSet(chanNum)) 
+	{
+		mvTwsiStopBitSet(chanNum);
+		return MV_FAIL;
+	}
+
+	DB(mvOsPrintf("TWSI: mvTwsiEepromWrite after mvTwsiStartBitSet\n"));
+	if(MV_OK != mvTwsiAddrSet(chanNum, &(pTwsiSlave->slaveAddr), MV_TWSI_WRITE))
+	{
+		mvTwsiStopBitSet(chanNum);
+		return MV_FAIL;
+	}
+	DB(mvOsPrintf("TWSI :mvTwsiEepromWrite after mvTwsiAddrSet\n"));
+
+	/* in case offset exsist (i.e. eeprom ) */
+	if(MV_TRUE == pTwsiSlave->validOffset)
+	{
+		if(MV_OK != twsiTargetOffsSet(chanNum, pTwsiSlave->offset, pTwsiSlave->moreThen256)) 
+		{
+			mvTwsiStopBitSet(chanNum);
+			return MV_FAIL;
+		}
+		DB(mvOsPrintf("TWSI: mvTwsiEepromWrite after twsiTargetOffsSet\n"));
+	}
+	if(MV_OK != twsiDataTransmit(chanNum, pBlock, blockSize)) 
+	{
+		mvTwsiStopBitSet(chanNum);
+		return MV_FAIL;
+	}
+	DB(mvOsPrintf("TWSI: mvTwsiEepromWrite after twsiDataTransmit\n"));
+	if(MV_OK != mvTwsiStopBitSet(chanNum)) 
+	{
+		return MV_FAIL;
+	}
+	DB(mvOsPrintf("TWSI: mvTwsiEepromWrite after mvTwsiStopBitSet\n"));
+
+	return MV_OK;
+}
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsi.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsi.h
new file mode 100644
index 0000000000..bd5b6d0090
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsi.h
@@ -0,0 +1,121 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+#ifndef __INCmvTwsiH
+#define __INCmvTwsiH
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* need to update this includes */
+#include "twsi/mvTwsiSpec.h"
+#include "ctrlEnv/mvCtrlEnvLib.h"
+
+
+/* The TWSI interface supports both 7-bit and 10-bit addressing.            */
+/* This enumerator describes addressing type.                               */
+typedef enum _mvTwsiAddrType
+{
+    ADDR7_BIT,                      /* 7 bit address    */
+    ADDR10_BIT                      /* 10 bit address   */
+}MV_TWSI_ADDR_TYPE;
+
+/* This structure describes TWSI address.                                   */
+typedef struct _mvTwsiAddr
+{
+    MV_U32              address;    /* address          */
+    MV_TWSI_ADDR_TYPE   type;       /* Address type     */
+}MV_TWSI_ADDR;
+
+/* This structure describes a TWSI slave.                                   */
+typedef struct _mvTwsiSlave
+{
+    MV_TWSI_ADDR	slaveAddr;
+    MV_BOOL 		validOffset;		/* whether the slave has offset (i.e. Eeprom  etc.) 	*/
+    MV_U32		offset;		/* offset in the slave.					*/
+    MV_BOOL 		moreThen256;	/* whether the ofset is bigger then 256 		*/
+}MV_TWSI_SLAVE;
+
+/* This enumerator describes TWSI protocol commands.                        */
+typedef enum _mvTwsiCmd
+{
+    MV_TWSI_WRITE,   /* TWSI write command - 0 according to spec   */
+    MV_TWSI_READ   /* TWSI read command  - 1 according to spec */
+}MV_TWSI_CMD;
+
+MV_STATUS mvTwsiStartBitSet(MV_U8 chanNum);
+MV_STATUS mvTwsiStopBitSet(MV_U8 chanNum);
+MV_STATUS mvTwsiAddrSet(MV_U8 chanNum, MV_TWSI_ADDR *twsiAddr, MV_TWSI_CMD command);
+
+MV_U32 mvTwsiInit(MV_U8 chanNum, MV_KHZ frequancy, MV_U32 Tclk, MV_TWSI_ADDR *twsiAddr, MV_BOOL generalCallEnable); 
+MV_STATUS mvTwsiRead (MV_U8 chanNum, MV_TWSI_SLAVE *twsiSlave, MV_U8 *pBlock, MV_U32 blockSize);
+MV_STATUS mvTwsiWrite(MV_U8 chanNum, MV_TWSI_SLAVE *twsiSlave, MV_U8 *pBlock, MV_U32 blockSize);
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __INCmvTwsiH */
+
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsiSpec.h b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsiSpec.h
new file mode 100644
index 0000000000..d0c2b9e7bd
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsiSpec.h
@@ -0,0 +1,160 @@
+/*******************************************************************************
+Copyright (C) Marvell International Ltd. and its affiliates
+
+This software file (the "File") is owned and distributed by Marvell 
+International Ltd. and/or its affiliates ("Marvell") under the following
+alternative licensing terms.  Once you have made an election to distribute the
+File under one of the following license alternatives, please (i) delete this
+introductory statement regarding license alternatives, (ii) delete the two
+license alternatives that you have not elected to use and (iii) preserve the
+Marvell copyright notice above.
+
+********************************************************************************
+Marvell Commercial License Option
+
+If you received this File from Marvell and you have entered into a commercial
+license agreement (a "Commercial License") with Marvell, the File is licensed
+to you under the terms of the applicable Commercial License.
+
+********************************************************************************
+Marvell GPL License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File in accordance with the terms and conditions of the General 
+Public License Version 2, June 1991 (the "GPL License"), a copy of which is 
+available along with the File in the license.txt file or by writing to the Free 
+Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or 
+on the worldwide web at http://www.gnu.org/licenses/gpl.txt. 
+
+THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY 
+DISCLAIMED.  The GPL License provides additional details about this warranty 
+disclaimer.
+********************************************************************************
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or 
+modify this File under the following licensing terms. 
+Redistribution and use in source and binary forms, with or without modification, 
+are permitted provided that the following conditions are met:
+
+    *   Redistributions of source code must retain the above copyright notice,
+	    this list of conditions and the following disclaimer. 
+
+    *   Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution. 
+
+    *   Neither the name of Marvell nor the names of its contributors may be 
+        used to endorse or promote products derived from this software without 
+        specific prior written permission. 
+    
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR 
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+/****************************************/
+/* TWSI Registers                        */
+/****************************************/
+#ifndef __INCmvTwsiSpech
+#define __INCmvTwsiSpech
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* defines */
+#define TWSI_SLAVE_ADDR_REG(chanNum)	(TWSI_SLAVE_BASE(chanNum)+ 0x00)
+
+#define TWSI_SLAVE_ADDR_GCE_ENA		BIT0
+#define TWSI_SLAVE_ADDR_7BIT_OFFS	0x1
+#define TWSI_SLAVE_ADDR_7BIT_MASK 	(0xFF << TWSI_SLAVE_ADDR_7BIT_OFFS)
+#define TWSI_SLAVE_ADDR_10BIT_OFFS	0x7
+#define TWSI_SLAVE_ADDR_10BIT_MASK 	0x300
+#define	TWSI_SLAVE_ADDR_10BIT_CONST 	0xF0
+
+
+#define TWSI_EXTENDED_SLAVE_ADDR_REG(chanNum)	(TWSI_SLAVE_BASE(chanNum) + 0x10)
+#define TWSI_EXTENDED_SLAVE_OFFS 	0
+#define TWSI_EXTENDED_SLAVE_MASK	(0xFF << TWSI_EXTENDED_SLAVE_OFFS)
+
+
+#define TWSI_DATA_REG(chanNum)		(TWSI_SLAVE_BASE(chanNum) + 0x04)
+#define TWSI_DATA_COMMAND_OFFS		0x0
+#define TWSI_DATA_COMMAND_MASK 		(0x1 << TWSI_DATA_COMMAND_OFFS)
+#define TWSI_DATA_COMMAND_WR		(0x1 << TWSI_DATA_COMMAND_OFFS)
+#define TWSI_DATA_COMMAND_RD		(0x0 << TWSI_DATA_COMMAND_OFFS)
+#define TWSI_DATA_ADDR_7BIT_OFFS	0x1
+#define TWSI_DATA_ADDR_7BIT_MASK 	(0xFF << TWSI_DATA_ADDR_7BIT_OFFS)
+#define TWSI_DATA_ADDR_10BIT_OFFS	0x7
+#define TWSI_DATA_ADDR_10BIT_MASK	0x300
+#define TWSI_DATA_ADDR_10BIT_CONST	0xF0
+
+
+#define TWSI_CONTROL_REG(chanNum)	(TWSI_SLAVE_BASE(chanNum) + 0x08)
+#define TWSI_CONTROL_ACK            	BIT2
+#define TWSI_CONTROL_INT_FLAG_SET   	BIT3
+#define TWSI_CONTROL_STOP_BIT    	BIT4
+#define TWSI_CONTROL_START_BIT 		BIT5 
+#define TWSI_CONTROL_ENA     		BIT6
+#define TWSI_CONTROL_INT_ENA    	BIT7
+
+
+#define TWSI_STATUS_BAUDE_RATE_REG(chanNum)	(TWSI_SLAVE_BASE(chanNum) + 0x0c)
+#define TWSI_BAUD_RATE_N_OFFS		0
+#define TWSI_BAUD_RATE_N_MASK		(0x7 << TWSI_BAUD_RATE_N_OFFS)
+#define TWSI_BAUD_RATE_M_OFFS   	3
+#define TWSI_BAUD_RATE_M_MASK  		(0xF << TWSI_BAUD_RATE_M_OFFS)
+
+#define TWSI_SOFT_RESET_REG(chanNum)	(TWSI_SLAVE_BASE(chanNum) + 0x1c)
+
+/* defines */
+#define TWSI_TIMEOUT_VALUE 		0x500 
+
+/* TWSI status codes */
+#define TWSI_BUS_ERROR                                            0x00
+#define TWSI_START_CON_TRA                                        0x08
+#define TWSI_REPEATED_START_CON_TRA                               0x10
+#define TWSI_AD_PLS_WR_BIT_TRA_ACK_REC                            0x18
+#define TWSI_AD_PLS_WR_BIT_TRA_ACK_NOT_REC                        0x20
+#define TWSI_M_TRAN_DATA_BYTE_ACK_REC                             0x28
+#define TWSI_M_TRAN_DATA_BYTE_ACK_NOT_REC                         0x30
+#define TWSI_M_LOST_ARB_DUR_AD_OR_DATA_TRA                        0x38
+#define TWSI_AD_PLS_RD_BIT_TRA_ACK_REC                            0x40
+#define TWSI_AD_PLS_RD_BIT_TRA_ACK_NOT_REC                        0x48
+#define TWSI_M_REC_RD_DATA_ACK_TRA                                0x50
+#define TWSI_M_REC_RD_DATA_ACK_NOT_TRA                            0x58
+#define TWSI_SLA_REC_AD_PLS_WR_BIT_ACK_TRA                        0x60
+#define TWSI_M_LOST_ARB_DUR_AD_TRA_AD_IS_TRGT_TO_SLA_ACK_TRA_W    0x68
+#define TWSI_GNL_CALL_REC_ACK_TRA                                 0x70
+#define TWSI_M_LOST_ARB_DUR_AD_TRA_GNL_CALL_AD_REC_ACK_TRA        0x78
+#define TWSI_SLA_REC_WR_DATA_AF_REC_SLA_AD_ACK_TRAN               0x80
+#define TWSI_SLA_REC_WR_DATA_AF_REC_SLA_AD_ACK_NOT_TRAN           0x88
+#define TWSI_SLA_REC_WR_DATA_AF_REC_GNL_CALL_ACK_TRAN             0x90
+#define TWSI_SLA_REC_WR_DATA_AF_REC_GNL_CALL_ACK_NOT_TRAN         0x98
+#define TWSI_SLA_REC_STOP_OR_REPEATED_STRT_CON                    0xA0
+#define TWSI_SLA_REC_AD_PLS_RD_BIT_ACK_TRA                        0xA8
+#define TWSI_M_LOST_ARB_DUR_AD_TRA_AD_IS_TRGT_TO_SLA_ACK_TRA_R    0xB0
+#define TWSI_SLA_TRA_RD_DATA_ACK_REC                              0xB8
+#define TWSI_SLA_TRA_RD_DATA_ACK_NOT_REC                          0xC0
+#define TWSI_SLA_TRA_LAST_RD_DATA_ACK_REC                         0xC8
+#define TWSI_SEC_AD_PLS_WR_BIT_TRA_ACK_REC                        0xD0
+#define TWSI_SEC_AD_PLS_WR_BIT_TRA_ACK_NOT_REC                    0xD8
+#define TWSI_SEC_AD_PLS_RD_BIT_TRA_ACK_REC                        0xE0
+#define TWSI_SEC_AD_PLS_RD_BIT_TRA_ACK_NOT_REC                    0xE8
+#define TWSI_NO_REL_STS_INT_FLAG_IS_KEPT_0                        0xF8
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __INCmvTwsiSpech */
diff --git a/target/linux/generic/files/crypto/ocf/ocf-bench.c b/target/linux/generic/files/crypto/ocf/ocf-bench.c
new file mode 100644
index 0000000000..d32523185f
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/ocf-bench.c
@@ -0,0 +1,436 @@
+/*
+ * A loadable module that benchmarks the OCF crypto speed from kernel space.
+ *
+ * Copyright (C) 2004-2010 David McCullough <david_mccullough@mcafee.com>
+ *
+ * LICENSE TERMS
+ *
+ * The free distribution and use of this software in both source and binary
+ * form is allowed (with or without changes) provided that:
+ *
+ *   1. distributions of this source code include the above copyright
+ *      notice, this list of conditions and the following disclaimer;
+ *
+ *   2. distributions in binary form include the above copyright
+ *      notice, this list of conditions and the following disclaimer
+ *      in the documentation and/or other associated materials;
+ *
+ *   3. the copyright holder's name is not used to endorse products
+ *      built using this software without specific written permission.
+ *
+ * ALTERNATIVELY, provided that this notice is retained in full, this product
+ * may be distributed under the terms of the GNU General Public License (GPL),
+ * in which case the provisions of the GPL apply INSTEAD OF those given above.
+ *
+ * DISCLAIMER
+ *
+ * This software is provided 'as is' with no explicit or implied warranties
+ * in respect of its properties, including, but not limited to, correctness
+ * and/or fitness for purpose.
+ */
+
+
+#ifndef AUTOCONF_INCLUDED
+#include <linux/config.h>
+#endif
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/wait.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/version.h>
+#include <linux/interrupt.h>
+#include <cryptodev.h>
+
+#ifdef I_HAVE_AN_XSCALE_WITH_INTEL_SDK
+#define BENCH_IXP_ACCESS_LIB 1
+#endif
+#ifdef BENCH_IXP_ACCESS_LIB
+#include <IxTypes.h>
+#include <IxOsBuffMgt.h>
+#include <IxNpeDl.h>
+#include <IxCryptoAcc.h>
+#include <IxQMgr.h>
+#include <IxOsServices.h>
+#include <IxOsCacheMMU.h>
+#endif
+
+/*
+ * support for access lib version 1.4
+ */
+#ifndef IX_MBUF_PRIV
+#define IX_MBUF_PRIV(x) ((x)->priv)
+#endif
+
+/*
+ * the number of simultaneously active requests
+ */
+static int request_q_len = 20;
+module_param(request_q_len, int, 0);
+MODULE_PARM_DESC(request_q_len, "Number of outstanding requests");
+/*
+ * how many requests we want to have processed
+ */
+static int request_num = 1024;
+module_param(request_num, int, 0);
+MODULE_PARM_DESC(request_num, "run for at least this many requests");
+/*
+ * the size of each request
+ */
+static int request_size = 1500;
+module_param(request_size, int, 0);
+MODULE_PARM_DESC(request_size, "size of each request");
+
+/*
+ * a structure for each request
+ */
+typedef struct  {
+	struct work_struct work;
+#ifdef BENCH_IXP_ACCESS_LIB
+	IX_MBUF mbuf;
+#endif
+	unsigned char *buffer;
+} request_t;
+
+static request_t *requests;
+
+static int outstanding;
+static int total;
+
+/*************************************************************************/
+/*
+ * OCF benchmark routines
+ */
+
+static uint64_t ocf_cryptoid;
+static int ocf_init(void);
+static int ocf_cb(struct cryptop *crp);
+static void ocf_request(void *arg);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
+static void ocf_request_wq(struct work_struct *work);
+#endif
+
+static int
+ocf_init(void)
+{
+	int error;
+	struct cryptoini crie, cria;
+	struct cryptodesc crda, crde;
+
+	memset(&crie, 0, sizeof(crie));
+	memset(&cria, 0, sizeof(cria));
+	memset(&crde, 0, sizeof(crde));
+	memset(&crda, 0, sizeof(crda));
+
+	cria.cri_alg  = CRYPTO_SHA1_HMAC;
+	cria.cri_klen = 20 * 8;
+	cria.cri_key  = "0123456789abcdefghij";
+
+	crie.cri_alg  = CRYPTO_3DES_CBC;
+	crie.cri_klen = 24 * 8;
+	crie.cri_key  = "0123456789abcdefghijklmn";
+
+	crie.cri_next = &cria;
+
+	error = crypto_newsession(&ocf_cryptoid, &crie, 0);
+	if (error) {
+		printk("crypto_newsession failed %d\n", error);
+		return -1;
+	}
+	return 0;
+}
+
+static int
+ocf_cb(struct cryptop *crp)
+{
+	request_t *r = (request_t *) crp->crp_opaque;
+
+	if (crp->crp_etype)
+		printk("Error in OCF processing: %d\n", crp->crp_etype);
+	total++;
+	crypto_freereq(crp);
+	crp = NULL;
+
+	if (total > request_num) {
+		outstanding--;
+		return 0;
+	}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
+	INIT_WORK(&r->work, ocf_request_wq);
+#else
+	INIT_WORK(&r->work, ocf_request, r);
+#endif
+	schedule_work(&r->work);
+	return 0;
+}
+
+
+static void
+ocf_request(void *arg)
+{
+	request_t *r = arg;
+	struct cryptop *crp = crypto_getreq(2);
+	struct cryptodesc *crde, *crda;
+
+	if (!crp) {
+		outstanding--;
+		return;
+	}
+
+	crde = crp->crp_desc;
+	crda = crde->crd_next;
+
+	crda->crd_skip = 0;
+	crda->crd_flags = 0;
+	crda->crd_len = request_size;
+	crda->crd_inject = request_size;
+	crda->crd_alg = CRYPTO_SHA1_HMAC;
+	crda->crd_key = "0123456789abcdefghij";
+	crda->crd_klen = 20 * 8;
+
+	crde->crd_skip = 0;
+	crde->crd_flags = CRD_F_IV_EXPLICIT | CRD_F_ENCRYPT;
+	crde->crd_len = request_size;
+	crde->crd_inject = request_size;
+	crde->crd_alg = CRYPTO_3DES_CBC;
+	crde->crd_key = "0123456789abcdefghijklmn";
+	crde->crd_klen = 24 * 8;
+
+	crp->crp_ilen = request_size + 64;
+	crp->crp_flags = CRYPTO_F_CBIMM;
+	crp->crp_buf = (caddr_t) r->buffer;
+	crp->crp_callback = ocf_cb;
+	crp->crp_sid = ocf_cryptoid;
+	crp->crp_opaque = (caddr_t) r;
+	crypto_dispatch(crp);
+}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
+static void
+ocf_request_wq(struct work_struct *work)
+{
+	request_t *r = container_of(work, request_t, work);
+	ocf_request(r);
+}
+#endif
+
+/*************************************************************************/
+#ifdef BENCH_IXP_ACCESS_LIB
+/*************************************************************************/
+/*
+ * CryptoAcc benchmark routines
+ */
+
+static IxCryptoAccCtx ixp_ctx;
+static UINT32 ixp_ctx_id;
+static IX_MBUF ixp_pri;
+static IX_MBUF ixp_sec;
+static int ixp_registered = 0;
+
+static void ixp_register_cb(UINT32 ctx_id, IX_MBUF *bufp,
+					IxCryptoAccStatus status);
+static void ixp_perform_cb(UINT32 ctx_id, IX_MBUF *sbufp, IX_MBUF *dbufp,
+					IxCryptoAccStatus status);
+static void ixp_request(void *arg);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
+static void ixp_request_wq(struct work_struct *work);
+#endif
+
+static int
+ixp_init(void)
+{
+	IxCryptoAccStatus status;
+
+	ixp_ctx.cipherCtx.cipherAlgo = IX_CRYPTO_ACC_CIPHER_3DES;
+	ixp_ctx.cipherCtx.cipherMode = IX_CRYPTO_ACC_MODE_CBC;
+	ixp_ctx.cipherCtx.cipherKeyLen = 24;
+	ixp_ctx.cipherCtx.cipherBlockLen = IX_CRYPTO_ACC_DES_BLOCK_64;
+	ixp_ctx.cipherCtx.cipherInitialVectorLen = IX_CRYPTO_ACC_DES_IV_64;
+	memcpy(ixp_ctx.cipherCtx.key.cipherKey, "0123456789abcdefghijklmn", 24);
+
+	ixp_ctx.authCtx.authAlgo = IX_CRYPTO_ACC_AUTH_SHA1;
+	ixp_ctx.authCtx.authDigestLen = 12;
+	ixp_ctx.authCtx.aadLen = 0;
+	ixp_ctx.authCtx.authKeyLen = 20;
+	memcpy(ixp_ctx.authCtx.key.authKey, "0123456789abcdefghij", 20);
+
+	ixp_ctx.useDifferentSrcAndDestMbufs = 0;
+	ixp_ctx.operation = IX_CRYPTO_ACC_OP_ENCRYPT_AUTH ;
+
+	IX_MBUF_MLEN(&ixp_pri)  = IX_MBUF_PKT_LEN(&ixp_pri) = 128;
+	IX_MBUF_MDATA(&ixp_pri) = (unsigned char *) kmalloc(128, SLAB_ATOMIC);
+	IX_MBUF_MLEN(&ixp_sec)  = IX_MBUF_PKT_LEN(&ixp_sec) = 128;
+	IX_MBUF_MDATA(&ixp_sec) = (unsigned char *) kmalloc(128, SLAB_ATOMIC);
+
+	status = ixCryptoAccCtxRegister(&ixp_ctx, &ixp_pri, &ixp_sec,
+			ixp_register_cb, ixp_perform_cb, &ixp_ctx_id);
+
+	if (IX_CRYPTO_ACC_STATUS_SUCCESS == status) {
+		while (!ixp_registered)
+			schedule();
+		return ixp_registered < 0 ? -1 : 0;
+	}
+
+	printk("ixp: ixCryptoAccCtxRegister failed %d\n", status);
+	return -1;
+}
+
+static void
+ixp_register_cb(UINT32 ctx_id, IX_MBUF *bufp, IxCryptoAccStatus status)
+{
+	if (bufp) {
+		IX_MBUF_MLEN(bufp) = IX_MBUF_PKT_LEN(bufp) = 0;
+		kfree(IX_MBUF_MDATA(bufp));
+		IX_MBUF_MDATA(bufp) = NULL;
+	}
+
+	if (IX_CRYPTO_ACC_STATUS_WAIT == status)
+		return;
+	if (IX_CRYPTO_ACC_STATUS_SUCCESS == status)
+		ixp_registered = 1;
+	else
+		ixp_registered = -1;
+}
+
+static void
+ixp_perform_cb(
+	UINT32 ctx_id,
+	IX_MBUF *sbufp,
+	IX_MBUF *dbufp,
+	IxCryptoAccStatus status)
+{
+	request_t *r = NULL;
+
+	total++;
+	if (total > request_num) {
+		outstanding--;
+		return;
+	}
+
+	if (!sbufp || !(r = IX_MBUF_PRIV(sbufp))) {
+		printk("crappo %p %p\n", sbufp, r);
+		outstanding--;
+		return;
+	}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
+	INIT_WORK(&r->work, ixp_request_wq);
+#else
+	INIT_WORK(&r->work, ixp_request, r);
+#endif
+	schedule_work(&r->work);
+}
+
+static void
+ixp_request(void *arg)
+{
+	request_t *r = arg;
+	IxCryptoAccStatus status;
+
+	memset(&r->mbuf, 0, sizeof(r->mbuf));
+	IX_MBUF_MLEN(&r->mbuf) = IX_MBUF_PKT_LEN(&r->mbuf) = request_size + 64;
+	IX_MBUF_MDATA(&r->mbuf) = r->buffer;
+	IX_MBUF_PRIV(&r->mbuf) = r;
+	status = ixCryptoAccAuthCryptPerform(ixp_ctx_id, &r->mbuf, NULL,
+			0, request_size, 0, request_size, request_size, r->buffer);
+	if (IX_CRYPTO_ACC_STATUS_SUCCESS != status) {
+		printk("status1 = %d\n", status);
+		outstanding--;
+		return;
+	}
+	return;
+}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
+static void
+ixp_request_wq(struct work_struct *work)
+{
+	request_t *r = container_of(work, request_t, work);
+	ixp_request(r);
+}
+#endif
+
+/*************************************************************************/
+#endif /* BENCH_IXP_ACCESS_LIB */
+/*************************************************************************/
+
+int
+ocfbench_init(void)
+{
+	int i, jstart, jstop;
+
+	printk("Crypto Speed tests\n");
+
+	requests = kmalloc(sizeof(request_t) * request_q_len, GFP_KERNEL);
+	if (!requests) {
+		printk("malloc failed\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < request_q_len; i++) {
+		/* +64 for return data */
+		requests[i].buffer = kmalloc(request_size + 128, GFP_DMA);
+		if (!requests[i].buffer) {
+			printk("malloc failed\n");
+			return -EINVAL;
+		}
+		memset(requests[i].buffer, '0' + i, request_size + 128);
+	}
+
+	/*
+	 * OCF benchmark
+	 */
+	printk("OCF: testing ...\n");
+	ocf_init();
+	total = outstanding = 0;
+	jstart = jiffies;
+	for (i = 0; i < request_q_len; i++) {
+		outstanding++;
+		ocf_request(&requests[i]);
+	}
+	while (outstanding > 0)
+		schedule();
+	jstop = jiffies;
+
+	printk("OCF: %d requests of %d bytes in %d jiffies\n", total, request_size,
+			jstop - jstart);
+
+#ifdef BENCH_IXP_ACCESS_LIB
+	/*
+	 * IXP benchmark
+	 */
+	printk("IXP: testing ...\n");
+	ixp_init();
+	total = outstanding = 0;
+	jstart = jiffies;
+	for (i = 0; i < request_q_len; i++) {
+		outstanding++;
+		ixp_request(&requests[i]);
+	}
+	while (outstanding > 0)
+		schedule();
+	jstop = jiffies;
+
+	printk("IXP: %d requests of %d bytes in %d jiffies\n", total, request_size,
+			jstop - jstart);
+#endif /* BENCH_IXP_ACCESS_LIB */
+
+	for (i = 0; i < request_q_len; i++)
+		kfree(requests[i].buffer);
+	kfree(requests);
+	return -EINVAL; /* always fail to load so it can be re-run quickly ;-) */
+}
+
+static void __exit ocfbench_exit(void)
+{
+}
+
+module_init(ocfbench_init);
+module_exit(ocfbench_exit);
+
+MODULE_LICENSE("BSD");
+MODULE_AUTHOR("David McCullough <david_mccullough@mcafee.com>");
+MODULE_DESCRIPTION("Benchmark various in-kernel crypto speeds");
diff --git a/target/linux/generic/files/crypto/ocf/ocf-compat.h b/target/linux/generic/files/crypto/ocf/ocf-compat.h
new file mode 100644
index 0000000000..212f971239
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/ocf-compat.h
@@ -0,0 +1,294 @@
+#ifndef _BSD_COMPAT_H_
+#define _BSD_COMPAT_H_ 1
+/****************************************************************************/
+/*
+ * Provide compat routines for older linux kernels and BSD kernels
+ *
+ * Written by David McCullough <david_mccullough@mcafee.com>
+ * Copyright (C) 2010 David McCullough <david_mccullough@mcafee.com>
+ *
+ * LICENSE TERMS
+ *
+ * The free distribution and use of this software in both source and binary
+ * form is allowed (with or without changes) provided that:
+ *
+ *   1. distributions of this source code include the above copyright
+ *      notice, this list of conditions and the following disclaimer;
+ *
+ *   2. distributions in binary form include the above copyright
+ *      notice, this list of conditions and the following disclaimer
+ *      in the documentation and/or other associated materials;
+ *
+ *   3. the copyright holder's name is not used to endorse products
+ *      built using this software without specific written permission.
+ *
+ * ALTERNATIVELY, provided that this notice is retained in full, this file
+ * may be distributed under the terms of the GNU General Public License (GPL),
+ * in which case the provisions of the GPL apply INSTEAD OF those given above.
+ *
+ * DISCLAIMER
+ *
+ * This software is provided 'as is' with no explicit or implied warranties
+ * in respect of its properties, including, but not limited to, correctness
+ * and/or fitness for purpose.
+ */
+/****************************************************************************/
+#ifdef __KERNEL__
+/*
+ * fake some BSD driver interface stuff specifically for OCF use
+ */
+
+typedef struct ocf_device *device_t;
+
+typedef struct {
+	int (*cryptodev_newsession)(device_t dev, u_int32_t *sidp, struct cryptoini *cri);
+	int (*cryptodev_freesession)(device_t dev, u_int64_t tid);
+	int (*cryptodev_process)(device_t dev, struct cryptop *crp, int hint);
+	int (*cryptodev_kprocess)(device_t dev, struct cryptkop *krp, int hint);
+} device_method_t;
+#define DEVMETHOD(id, func)	id: func
+
+struct ocf_device {
+	char name[32];		/* the driver name */
+	char nameunit[32];	/* the driver name + HW instance */
+	int  unit;
+	device_method_t	methods;
+	void *softc;
+};
+
+#define CRYPTODEV_NEWSESSION(dev, sid, cri) \
+	((*(dev)->methods.cryptodev_newsession)(dev,sid,cri))
+#define CRYPTODEV_FREESESSION(dev, sid) \
+	((*(dev)->methods.cryptodev_freesession)(dev, sid))
+#define CRYPTODEV_PROCESS(dev, crp, hint) \
+	((*(dev)->methods.cryptodev_process)(dev, crp, hint))
+#define CRYPTODEV_KPROCESS(dev, krp, hint) \
+	((*(dev)->methods.cryptodev_kprocess)(dev, krp, hint))
+
+#define device_get_name(dev)	((dev)->name)
+#define device_get_nameunit(dev)	((dev)->nameunit)
+#define device_get_unit(dev)	((dev)->unit)
+#define device_get_softc(dev)	((dev)->softc)
+
+#define	softc_device_decl \
+		struct ocf_device _device; \
+		device_t
+
+#define	softc_device_init(_sc, _name, _unit, _methods) \
+	if (1) {\
+	strncpy((_sc)->_device.name, _name, sizeof((_sc)->_device.name) - 1); \
+	snprintf((_sc)->_device.nameunit, sizeof((_sc)->_device.name), "%s%d", _name, _unit); \
+	(_sc)->_device.unit = _unit; \
+	(_sc)->_device.methods = _methods; \
+	(_sc)->_device.softc = (void *) _sc; \
+	*(device_t *)((softc_get_device(_sc))+1) = &(_sc)->_device; \
+	} else
+
+#define	softc_get_device(_sc)	(&(_sc)->_device)
+
+/*
+ * iomem support for 2.4 and 2.6 kernels
+ */
+#include <linux/version.h>
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
+#define ocf_iomem_t	unsigned long
+
+/*
+ * implement simple workqueue like support for older kernels
+ */
+
+#include <linux/tqueue.h>
+
+#define work_struct tq_struct
+
+#define INIT_WORK(wp, fp, ap) \
+	do { \
+		(wp)->sync = 0; \
+		(wp)->routine = (fp); \
+		(wp)->data = (ap); \
+	} while (0)
+
+#define schedule_work(wp) \
+	do { \
+		queue_task((wp), &tq_immediate); \
+		mark_bh(IMMEDIATE_BH); \
+	} while (0)
+
+#define flush_scheduled_work()	run_task_queue(&tq_immediate)
+
+#else
+#define ocf_iomem_t	void __iomem *
+
+#include <linux/workqueue.h>
+
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26)
+#include <linux/fdtable.h>
+#elif LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11)
+#define files_fdtable(files)	(files)
+#endif
+
+#ifdef MODULE_PARM
+#undef module_param	/* just in case */
+#define	module_param(a,b,c)		MODULE_PARM(a,"i")
+#endif
+
+#define bzero(s,l)		memset(s,0,l)
+#define bcopy(s,d,l)	memcpy(d,s,l)
+#define bcmp(x, y, l)	memcmp(x,y,l)
+
+#define MIN(x,y)	((x) < (y) ? (x) : (y))
+
+#define device_printf(dev, a...) ({ \
+				printk("%s: ", device_get_nameunit(dev)); printk(a); \
+			})
+
+#undef printf
+#define printf(fmt...)	printk(fmt)
+
+#define KASSERT(c,p)	if (!(c)) { printk p ; } else
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
+#define ocf_daemonize(str) \
+	daemonize(); \
+	spin_lock_irq(&current->sigmask_lock); \
+	sigemptyset(&current->blocked); \
+	recalc_sigpending(current); \
+	spin_unlock_irq(&current->sigmask_lock); \
+	sprintf(current->comm, str);
+#else
+#define ocf_daemonize(str) daemonize(str);
+#endif
+
+#define	TAILQ_INSERT_TAIL(q,d,m) list_add_tail(&(d)->m, (q))
+#define	TAILQ_EMPTY(q)	list_empty(q)
+#define	TAILQ_FOREACH(v, q, m) list_for_each_entry(v, q, m)
+
+#define read_random(p,l) get_random_bytes(p,l)
+
+#define DELAY(x)	((x) > 2000 ? mdelay((x)/1000) : udelay(x))
+#define strtoul simple_strtoul
+
+#define pci_get_vendor(dev)	((dev)->vendor)
+#define pci_get_device(dev)	((dev)->device)
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
+#define pci_set_consistent_dma_mask(dev, mask) (0)
+#endif
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10)
+#define pci_dma_sync_single_for_cpu pci_dma_sync_single
+#endif
+
+#ifndef DMA_32BIT_MASK
+#define DMA_32BIT_MASK  0x00000000ffffffffULL
+#endif
+
+#ifndef htole32
+#define htole32(x)	cpu_to_le32(x)
+#endif
+#ifndef htobe32
+#define htobe32(x)	cpu_to_be32(x)
+#endif
+#ifndef htole16
+#define htole16(x)	cpu_to_le16(x)
+#endif
+#ifndef htobe16
+#define htobe16(x)	cpu_to_be16(x)
+#endif
+
+/* older kernels don't have these */
+
+#include <asm/irq.h>
+#if !defined(IRQ_NONE) && !defined(IRQ_RETVAL)
+#define IRQ_NONE
+#define IRQ_HANDLED
+#define IRQ_WAKE_THREAD
+#define IRQ_RETVAL
+#define irqreturn_t void
+typedef irqreturn_t (*irq_handler_t)(int irq, void *arg, struct pt_regs *regs);
+#endif
+#ifndef IRQF_SHARED
+#define IRQF_SHARED	SA_SHIRQ
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
+# define strlcpy(dest,src,len) \
+		({strncpy(dest,src,(len)-1); ((char *)dest)[(len)-1] = '\0'; })
+#endif
+
+#ifndef MAX_ERRNO
+#define MAX_ERRNO	4095
+#endif
+#ifndef IS_ERR_VALUE
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,5)
+#include <linux/err.h>
+#endif
+#ifndef IS_ERR_VALUE
+#define IS_ERR_VALUE(x) ((unsigned long)(x) >= (unsigned long)-MAX_ERRNO)
+#endif
+#endif
+
+/*
+ * common debug for all
+ */
+#if 1
+#define dprintk(a...)	do { if (debug) printk(a); } while(0)
+#else
+#define dprintk(a...)
+#endif
+
+#ifndef SLAB_ATOMIC
+/* Changed in 2.6.20, must use GFP_ATOMIC now */
+#define	SLAB_ATOMIC	GFP_ATOMIC
+#endif
+
+/*
+ * need some additional support for older kernels */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,2)
+#define pci_register_driver_compat(driver, rc) \
+	do { \
+		if ((rc) > 0) { \
+			(rc) = 0; \
+		} else if (rc == 0) { \
+			(rc) = -ENODEV; \
+		} else { \
+			pci_unregister_driver(driver); \
+		} \
+	} while (0)
+#elif LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10)
+#define pci_register_driver_compat(driver,rc) ((rc) = (rc) < 0 ? (rc) : 0)
+#else
+#define pci_register_driver_compat(driver,rc)
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)
+
+#include <linux/mm.h>
+#include <asm/scatterlist.h>
+
+static inline void sg_set_page(struct scatterlist *sg,  struct page *page,
+			       unsigned int len, unsigned int offset)
+{
+	sg->page = page;
+	sg->offset = offset;
+	sg->length = len;
+}
+
+static inline void *sg_virt(struct scatterlist *sg)
+{
+	return page_address(sg->page) + sg->offset;
+}
+
+#define sg_init_table(sg, n)
+
+#endif
+
+#ifndef late_initcall
+#define late_initcall(init) module_init(init)
+#endif
+
+#endif /* __KERNEL__ */
+
+/****************************************************************************/
+#endif /* _BSD_COMPAT_H_ */
diff --git a/target/linux/generic/files/crypto/ocf/ocfnull/Makefile b/target/linux/generic/files/crypto/ocf/ocfnull/Makefile
new file mode 100644
index 0000000000..044bcacb7b
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/ocfnull/Makefile
@@ -0,0 +1,12 @@
+# for SGlinux builds
+-include $(ROOTDIR)/modules/.config
+
+obj-$(CONFIG_OCF_OCFNULL) += ocfnull.o
+
+obj ?= .
+EXTRA_CFLAGS += -I$(obj)/..
+
+ifdef TOPDIR
+-include $(TOPDIR)/Rules.make
+endif
+
diff --git a/target/linux/generic/files/crypto/ocf/ocfnull/ocfnull.c b/target/linux/generic/files/crypto/ocf/ocfnull/ocfnull.c
new file mode 100644
index 0000000000..a6b76cdaef
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/ocfnull/ocfnull.c
@@ -0,0 +1,203 @@
+/*
+ * An OCF module for determining the cost of crypto versus the cost of
+ * IPSec processing outside of OCF.  This modules gives us the effect of
+ * zero cost encryption,  of course you will need to run it at both ends
+ * since it does no crypto at all.
+ *
+ * Written by David McCullough <david_mccullough@mcafee.com>
+ * Copyright (C) 2006-2010 David McCullough 
+ *
+ * LICENSE TERMS
+ *
+ * The free distribution and use of this software in both source and binary
+ * form is allowed (with or without changes) provided that:
+ *
+ *   1. distributions of this source code include the above copyright
+ *      notice, this list of conditions and the following disclaimer;
+ *
+ *   2. distributions in binary form include the above copyright
+ *      notice, this list of conditions and the following disclaimer
+ *      in the documentation and/or other associated materials;
+ *
+ *   3. the copyright holder's name is not used to endorse products
+ *      built using this software without specific written permission.
+ *
+ * ALTERNATIVELY, provided that this notice is retained in full, this product
+ * may be distributed under the terms of the GNU General Public License (GPL),
+ * in which case the provisions of the GPL apply INSTEAD OF those given above.
+ *
+ * DISCLAIMER
+ *
+ * This software is provided 'as is' with no explicit or implied warranties
+ * in respect of its properties, including, but not limited to, correctness
+ * and/or fitness for purpose.
+ */
+
+#ifndef AUTOCONF_INCLUDED
+#include <linux/config.h>
+#endif
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/crypto.h>
+#include <linux/interrupt.h>
+
+#include <cryptodev.h>
+#include <uio.h>
+
+static int32_t			 null_id = -1;
+static u_int32_t		 null_sesnum = 0;
+
+static int null_process(device_t, struct cryptop *, int);
+static int null_newsession(device_t, u_int32_t *, struct cryptoini *);
+static int null_freesession(device_t, u_int64_t);
+
+#define debug ocfnull_debug
+int ocfnull_debug = 0;
+module_param(ocfnull_debug, int, 0644);
+MODULE_PARM_DESC(ocfnull_debug, "Enable debug");
+
+/*
+ * dummy device structure
+ */
+
+static struct {
+	softc_device_decl	sc_dev;
+} nulldev;
+
+static device_method_t null_methods = {
+	/* crypto device methods */
+	DEVMETHOD(cryptodev_newsession,	null_newsession),
+	DEVMETHOD(cryptodev_freesession,null_freesession),
+	DEVMETHOD(cryptodev_process,	null_process),
+};
+
+/*
+ * Generate a new software session.
+ */
+static int
+null_newsession(device_t arg, u_int32_t *sid, struct cryptoini *cri)
+{
+	dprintk("%s()\n", __FUNCTION__);
+	if (sid == NULL || cri == NULL) {
+		dprintk("%s,%d - EINVAL\n", __FILE__, __LINE__);
+		return EINVAL;
+	}
+
+	if (null_sesnum == 0)
+		null_sesnum++;
+	*sid = null_sesnum++;
+	return 0;
+}
+
+
+/*
+ * Free a session.
+ */
+static int
+null_freesession(device_t arg, u_int64_t tid)
+{
+	u_int32_t sid = CRYPTO_SESID2LID(tid);
+
+	dprintk("%s()\n", __FUNCTION__);
+	if (sid > null_sesnum) {
+		dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+		return EINVAL;
+	}
+
+	/* Silently accept and return */
+	if (sid == 0)
+		return 0;
+	return 0;
+}
+
+
+/*
+ * Process a request.
+ */
+static int
+null_process(device_t arg, struct cryptop *crp, int hint)
+{
+	unsigned int lid;
+
+	dprintk("%s()\n", __FUNCTION__);
+
+	/* Sanity check */
+	if (crp == NULL) {
+		dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+		return EINVAL;
+	}
+
+	crp->crp_etype = 0;
+
+	if (crp->crp_desc == NULL || crp->crp_buf == NULL) {
+		dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+		crp->crp_etype = EINVAL;
+		goto done;
+	}
+
+	/*
+	 * find the session we are using
+	 */
+
+	lid = crp->crp_sid & 0xffffffff;
+	if (lid >= null_sesnum || lid == 0) {
+		crp->crp_etype = ENOENT;
+		dprintk("%s,%d: ENOENT\n", __FILE__, __LINE__);
+		goto done;
+	}
+
+done:
+	crypto_done(crp);
+	return 0;
+}
+
+
+/*
+ * our driver startup and shutdown routines
+ */
+
+static int
+null_init(void)
+{
+	dprintk("%s(%p)\n", __FUNCTION__, null_init);
+
+	memset(&nulldev, 0, sizeof(nulldev));
+	softc_device_init(&nulldev, "ocfnull", 0, null_methods);
+
+	null_id = crypto_get_driverid(softc_get_device(&nulldev),
+				CRYPTOCAP_F_HARDWARE);
+	if (null_id < 0)
+		panic("ocfnull: crypto device cannot initialize!");
+
+#define	REGISTER(alg) \
+	crypto_register(null_id,alg,0,0)
+	REGISTER(CRYPTO_DES_CBC);
+	REGISTER(CRYPTO_3DES_CBC);
+	REGISTER(CRYPTO_RIJNDAEL128_CBC);
+	REGISTER(CRYPTO_MD5);
+	REGISTER(CRYPTO_SHA1);
+	REGISTER(CRYPTO_MD5_HMAC);
+	REGISTER(CRYPTO_SHA1_HMAC);
+#undef REGISTER
+
+	return 0;
+}
+
+static void
+null_exit(void)
+{
+	dprintk("%s()\n", __FUNCTION__);
+	crypto_unregister_all(null_id);
+	null_id = -1;
+}
+
+module_init(null_init);
+module_exit(null_exit);
+
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_AUTHOR("David McCullough <david_mccullough@mcafee.com>");
+MODULE_DESCRIPTION("ocfnull - claims a lot but does nothing");
diff --git a/target/linux/generic/files/crypto/ocf/pasemi/Makefile b/target/linux/generic/files/crypto/ocf/pasemi/Makefile
new file mode 100644
index 0000000000..b0a3980f21
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/pasemi/Makefile
@@ -0,0 +1,12 @@
+# for SGlinux builds
+-include $(ROOTDIR)/modules/.config
+
+obj-$(CONFIG_OCF_PASEMI) += pasemi.o
+
+obj ?= .
+EXTRA_CFLAGS += -I$(obj)/.. -I$(obj)/
+
+ifdef TOPDIR
+-include $(TOPDIR)/Rules.make
+endif
+
diff --git a/target/linux/generic/files/crypto/ocf/pasemi/pasemi.c b/target/linux/generic/files/crypto/ocf/pasemi/pasemi.c
new file mode 100644
index 0000000000..c3bb9313d3
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/pasemi/pasemi.c
@@ -0,0 +1,1009 @@
+/*
+ * Copyright (C) 2007 PA Semi, Inc
+ *
+ * Driver for the PA Semi PWRficient DMA Crypto Engine
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef AUTOCONF_INCLUDED
+#include <linux/config.h>
+#endif
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/random.h>
+#include <linux/skbuff.h>
+#include <asm/scatterlist.h>
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+#include <cryptodev.h>
+#include <uio.h>
+#include "pasemi_fnu.h"
+
+#define DRV_NAME "pasemi"
+
+#define TIMER_INTERVAL 1000
+
+static void __devexit pasemi_dma_remove(struct pci_dev *pdev);
+static struct pasdma_status volatile * dma_status;
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Enable debug");
+
+static void pasemi_desc_start(struct pasemi_desc *desc, u64 hdr)
+{
+	desc->postop = 0;
+	desc->quad[0] = hdr;
+	desc->quad_cnt = 1;
+	desc->size = 1;
+}
+
+static void pasemi_desc_build(struct pasemi_desc *desc, u64 val)
+{
+	desc->quad[desc->quad_cnt++] = val;
+	desc->size = (desc->quad_cnt + 1) / 2;
+}
+
+static void pasemi_desc_hdr(struct pasemi_desc *desc, u64 hdr)
+{
+	desc->quad[0] |= hdr;
+}
+
+static int pasemi_desc_size(struct pasemi_desc *desc)
+{
+	return desc->size;
+}
+
+static void pasemi_ring_add_desc(
+				 struct pasemi_fnu_txring *ring,
+				 struct pasemi_desc *desc,
+				 struct cryptop *crp) {
+	int i;
+	int ring_index = 2 * (ring->next_to_fill & (TX_RING_SIZE-1));
+
+	TX_DESC_INFO(ring, ring->next_to_fill).desc_size = desc->size;
+	TX_DESC_INFO(ring, ring->next_to_fill).desc_postop = desc->postop;
+	TX_DESC_INFO(ring, ring->next_to_fill).cf_crp = crp;
+
+	for (i = 0; i < desc->quad_cnt; i += 2) {
+		ring_index = 2 * (ring->next_to_fill & (TX_RING_SIZE-1));
+		ring->desc[ring_index] = desc->quad[i];
+		ring->desc[ring_index + 1] = desc->quad[i + 1];
+		ring->next_to_fill++;
+	}
+
+	if (desc->quad_cnt & 1)
+		ring->desc[ring_index + 1] = 0;
+}
+
+static void pasemi_ring_incr(struct pasemi_softc *sc, int chan_index, int incr)
+{
+	out_le32(sc->dma_regs + PAS_DMA_TXCHAN_INCR(sc->base_chan + chan_index),
+		 incr);
+}
+
+/*
+ * Generate a new software session.
+ */
+static int
+pasemi_newsession(device_t dev, u_int32_t *sidp, struct cryptoini *cri)
+{
+	struct cryptoini *c, *encini = NULL, *macini = NULL;
+	struct pasemi_softc *sc = device_get_softc(dev);
+	struct pasemi_session *ses = NULL, **sespp;
+	int sesn, blksz = 0;
+	u64 ccmd = 0;
+	unsigned long flags;
+	struct pasemi_desc init_desc;
+	struct pasemi_fnu_txring *txring;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+	if (sidp == NULL || cri == NULL || sc == NULL) {
+		DPRINTF("%s,%d - EINVAL\n", __FILE__, __LINE__);
+		return -EINVAL;
+	}
+	for (c = cri; c != NULL; c = c->cri_next) {
+		if (ALG_IS_SIG(c->cri_alg)) {
+			if (macini)
+				return -EINVAL;
+			macini = c;
+		} else if (ALG_IS_CIPHER(c->cri_alg)) {
+			if (encini)
+				return -EINVAL;
+			encini = c;
+		} else {
+			DPRINTF("UNKNOWN c->cri_alg %d\n", c->cri_alg);
+			return -EINVAL;
+		}
+	}
+	if (encini == NULL && macini == NULL)
+		return -EINVAL;
+	if (encini) {
+		/* validate key length */
+		switch (encini->cri_alg) {
+		case CRYPTO_DES_CBC:
+			if (encini->cri_klen != 64)
+				return -EINVAL;
+			ccmd = DMA_CALGO_DES;
+			break;
+		case CRYPTO_3DES_CBC:
+			if (encini->cri_klen != 192)
+				return -EINVAL;
+			ccmd = DMA_CALGO_3DES;
+			break;
+		case CRYPTO_AES_CBC:
+			if (encini->cri_klen != 128 &&
+			    encini->cri_klen != 192 &&
+			    encini->cri_klen != 256)
+				return -EINVAL;
+			ccmd = DMA_CALGO_AES;
+			break;
+		case CRYPTO_ARC4:
+			if (encini->cri_klen != 128)
+				return -EINVAL;
+			ccmd = DMA_CALGO_ARC;
+			break;
+		default:
+			DPRINTF("UNKNOWN encini->cri_alg %d\n",
+				encini->cri_alg);
+			return -EINVAL;
+		}
+	}
+
+	if (macini) {
+		switch (macini->cri_alg) {
+		case CRYPTO_MD5:
+		case CRYPTO_MD5_HMAC:
+			blksz = 16;
+			break;
+		case CRYPTO_SHA1:
+		case CRYPTO_SHA1_HMAC:
+			blksz = 20;
+			break;
+		default:
+			DPRINTF("UNKNOWN macini->cri_alg %d\n",
+				macini->cri_alg);
+			return -EINVAL;
+		}
+		if (((macini->cri_klen + 7) / 8) > blksz) {
+			DPRINTF("key length %d bigger than blksize %d not supported\n",
+				((macini->cri_klen + 7) / 8), blksz);
+			return -EINVAL;
+		}
+	}
+
+	for (sesn = 0; sesn < sc->sc_nsessions; sesn++) {
+		if (sc->sc_sessions[sesn] == NULL) {
+			sc->sc_sessions[sesn] = (struct pasemi_session *)
+				kzalloc(sizeof(struct pasemi_session), GFP_ATOMIC);
+			ses = sc->sc_sessions[sesn];
+			break;
+		} else if (sc->sc_sessions[sesn]->used == 0) {
+			ses = sc->sc_sessions[sesn];
+			break;
+		}
+	}
+
+	if (ses == NULL) {
+		sespp = (struct pasemi_session **)
+			kzalloc(sc->sc_nsessions * 2 *
+				sizeof(struct pasemi_session *), GFP_ATOMIC);
+		if (sespp == NULL)
+			return -ENOMEM;
+		memcpy(sespp, sc->sc_sessions,
+		       sc->sc_nsessions * sizeof(struct pasemi_session *));
+		kfree(sc->sc_sessions);
+		sc->sc_sessions = sespp;
+		sesn = sc->sc_nsessions;
+		ses = sc->sc_sessions[sesn] = (struct pasemi_session *)
+			kzalloc(sizeof(struct pasemi_session), GFP_ATOMIC);
+		if (ses == NULL)
+			return -ENOMEM;
+		sc->sc_nsessions *= 2;
+	}
+
+	ses->used = 1;
+
+	ses->dma_addr = pci_map_single(sc->dma_pdev, (void *) ses->civ,
+				       sizeof(struct pasemi_session), DMA_TO_DEVICE);
+
+	/* enter the channel scheduler */
+	spin_lock_irqsave(&sc->sc_chnlock, flags);
+
+	/* ARC4 has to be processed by the even channel */
+	if (encini && (encini->cri_alg == CRYPTO_ARC4))
+		ses->chan = sc->sc_lastchn & ~1;
+	else
+		ses->chan = sc->sc_lastchn;
+	sc->sc_lastchn = (sc->sc_lastchn + 1) % sc->sc_num_channels;
+
+	spin_unlock_irqrestore(&sc->sc_chnlock, flags);
+
+	txring = &sc->tx[ses->chan];
+
+	if (encini) {
+		ses->ccmd = ccmd;
+
+		/* get an IV */
+		/* XXX may read fewer than requested */
+		get_random_bytes(ses->civ, sizeof(ses->civ));
+
+		ses->keysz = (encini->cri_klen - 63) / 64;
+		memcpy(ses->key, encini->cri_key, (ses->keysz + 1) * 8);
+
+		pasemi_desc_start(&init_desc,
+				  XCT_CTRL_HDR(ses->chan, (encini && macini) ? 0x68 : 0x40, DMA_FN_CIV0));
+		pasemi_desc_build(&init_desc,
+				  XCT_FUN_SRC_PTR((encini && macini) ? 0x68 : 0x40, ses->dma_addr));
+	}
+	if (macini) {
+		if (macini->cri_alg == CRYPTO_MD5_HMAC ||
+		    macini->cri_alg == CRYPTO_SHA1_HMAC)
+			memcpy(ses->hkey, macini->cri_key, blksz);
+		else {
+			/* Load initialization constants(RFC 1321, 3174) */
+			ses->hiv[0] = 0x67452301efcdab89ULL;
+			ses->hiv[1] = 0x98badcfe10325476ULL;
+			ses->hiv[2] = 0xc3d2e1f000000000ULL;
+		}
+		ses->hseq = 0ULL;
+	}
+
+	spin_lock_irqsave(&txring->fill_lock, flags);
+
+	if (((txring->next_to_fill + pasemi_desc_size(&init_desc)) -
+	     txring->next_to_clean) > TX_RING_SIZE) {
+		spin_unlock_irqrestore(&txring->fill_lock, flags);
+		return ERESTART;
+	}
+
+	if (encini) {
+		pasemi_ring_add_desc(txring, &init_desc, NULL);
+		pasemi_ring_incr(sc, ses->chan,
+				 pasemi_desc_size(&init_desc));
+	}
+
+	txring->sesn = sesn;
+	spin_unlock_irqrestore(&txring->fill_lock, flags);
+
+	*sidp = PASEMI_SID(sesn);
+	return 0;
+}
+
+/*
+ * Deallocate a session.
+ */
+static int
+pasemi_freesession(device_t dev, u_int64_t tid)
+{
+	struct pasemi_softc *sc = device_get_softc(dev);
+	int session;
+	u_int32_t sid = ((u_int32_t) tid) & 0xffffffff;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	if (sc == NULL)
+		return -EINVAL;
+	session = PASEMI_SESSION(sid);
+	if (session >= sc->sc_nsessions || !sc->sc_sessions[session])
+		return -EINVAL;
+
+	pci_unmap_single(sc->dma_pdev,
+			 sc->sc_sessions[session]->dma_addr,
+			 sizeof(struct pasemi_session), DMA_TO_DEVICE);
+	memset(sc->sc_sessions[session], 0,
+	       sizeof(struct pasemi_session));
+
+	return 0;
+}
+
+static int
+pasemi_process(device_t dev, struct cryptop *crp, int hint)
+{
+
+	int err = 0, ivsize, srclen = 0, reinit = 0, reinit_size = 0, chsel;
+	struct pasemi_softc *sc = device_get_softc(dev);
+	struct cryptodesc *crd1, *crd2, *maccrd, *enccrd;
+	caddr_t ivp;
+	struct pasemi_desc init_desc, work_desc;
+	struct pasemi_session *ses;
+	struct sk_buff *skb;
+	struct uio *uiop;
+	unsigned long flags;
+	struct pasemi_fnu_txring *txring;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	if (crp == NULL || crp->crp_callback == NULL || sc == NULL)
+		return -EINVAL;
+
+	crp->crp_etype = 0;
+	if (PASEMI_SESSION(crp->crp_sid) >= sc->sc_nsessions)
+		return -EINVAL;
+
+	ses = sc->sc_sessions[PASEMI_SESSION(crp->crp_sid)];
+
+	crd1 = crp->crp_desc;
+	if (crd1 == NULL) {
+		err = -EINVAL;
+		goto errout;
+	}
+	crd2 = crd1->crd_next;
+
+	if (ALG_IS_SIG(crd1->crd_alg)) {
+		maccrd = crd1;
+		if (crd2 == NULL)
+			enccrd = NULL;
+		else if (ALG_IS_CIPHER(crd2->crd_alg) &&
+			 (crd2->crd_flags & CRD_F_ENCRYPT) == 0)
+			enccrd = crd2;
+		else
+			goto erralg;
+	} else if (ALG_IS_CIPHER(crd1->crd_alg)) {
+		enccrd = crd1;
+		if (crd2 == NULL)
+			maccrd = NULL;
+		else if (ALG_IS_SIG(crd2->crd_alg) &&
+			 (crd1->crd_flags & CRD_F_ENCRYPT))
+			maccrd = crd2;
+		else
+			goto erralg;
+	} else
+		goto erralg;
+
+	chsel = ses->chan;
+
+	txring = &sc->tx[chsel];
+
+	if (enccrd && !maccrd) {
+		if (enccrd->crd_alg == CRYPTO_ARC4)
+			reinit = 1;
+		reinit_size = 0x40;
+		srclen = crp->crp_ilen;
+
+		pasemi_desc_start(&work_desc, XCT_FUN_O | XCT_FUN_I
+				  | XCT_FUN_FUN(chsel));
+		if (enccrd->crd_flags & CRD_F_ENCRYPT)
+			pasemi_desc_hdr(&work_desc, XCT_FUN_CRM_ENC);
+		else
+			pasemi_desc_hdr(&work_desc, XCT_FUN_CRM_DEC);
+	} else if (enccrd && maccrd) {
+		if (enccrd->crd_alg == CRYPTO_ARC4)
+			reinit = 1;
+		reinit_size = 0x68;
+
+		if (enccrd->crd_flags & CRD_F_ENCRYPT) {
+			/* Encrypt -> Authenticate */
+			pasemi_desc_start(&work_desc, XCT_FUN_O | XCT_FUN_I | XCT_FUN_CRM_ENC_SIG
+					  | XCT_FUN_A | XCT_FUN_FUN(chsel));
+			srclen = maccrd->crd_skip + maccrd->crd_len;
+		} else {
+			/* Authenticate -> Decrypt */
+			pasemi_desc_start(&work_desc, XCT_FUN_O | XCT_FUN_I | XCT_FUN_CRM_SIG_DEC
+					  | XCT_FUN_24BRES | XCT_FUN_FUN(chsel));
+			pasemi_desc_build(&work_desc, 0);
+			pasemi_desc_build(&work_desc, 0);
+			pasemi_desc_build(&work_desc, 0);
+			work_desc.postop = PASEMI_CHECK_SIG;
+			srclen = crp->crp_ilen;
+		}
+
+		pasemi_desc_hdr(&work_desc, XCT_FUN_SHL(maccrd->crd_skip / 4));
+		pasemi_desc_hdr(&work_desc, XCT_FUN_CHL(enccrd->crd_skip - maccrd->crd_skip));
+	} else if (!enccrd && maccrd) {
+		srclen = maccrd->crd_len;
+
+		pasemi_desc_start(&init_desc,
+				  XCT_CTRL_HDR(chsel, 0x58, DMA_FN_HKEY0));
+		pasemi_desc_build(&init_desc,
+				  XCT_FUN_SRC_PTR(0x58, ((struct pasemi_session *)ses->dma_addr)->hkey));
+
+		pasemi_desc_start(&work_desc, XCT_FUN_O | XCT_FUN_I | XCT_FUN_CRM_SIG
+				  | XCT_FUN_A | XCT_FUN_FUN(chsel));
+	}
+
+	if (enccrd) {
+		switch (enccrd->crd_alg) {
+		case CRYPTO_3DES_CBC:
+			pasemi_desc_hdr(&work_desc, XCT_FUN_ALG_3DES |
+					XCT_FUN_BCM_CBC);
+			ivsize = sizeof(u64);
+			break;
+		case CRYPTO_DES_CBC:
+			pasemi_desc_hdr(&work_desc, XCT_FUN_ALG_DES |
+					XCT_FUN_BCM_CBC);
+			ivsize = sizeof(u64);
+			break;
+		case CRYPTO_AES_CBC:
+			pasemi_desc_hdr(&work_desc, XCT_FUN_ALG_AES |
+					XCT_FUN_BCM_CBC);
+			ivsize = 2 * sizeof(u64);
+			break;
+		case CRYPTO_ARC4:
+			pasemi_desc_hdr(&work_desc, XCT_FUN_ALG_ARC);
+			ivsize = 0;
+			break;
+		default:
+			printk(DRV_NAME ": unimplemented enccrd->crd_alg %d\n",
+			       enccrd->crd_alg);
+			err = -EINVAL;
+			goto errout;
+		}
+
+		ivp = (ivsize == sizeof(u64)) ? (caddr_t) &ses->civ[1] : (caddr_t) &ses->civ[0];
+		if (enccrd->crd_flags & CRD_F_ENCRYPT) {
+			if (enccrd->crd_flags & CRD_F_IV_EXPLICIT)
+				memcpy(ivp, enccrd->crd_iv, ivsize);
+			/* If IV is not present in the buffer already, it has to be copied there */
+			if ((enccrd->crd_flags & CRD_F_IV_PRESENT) == 0)
+				crypto_copyback(crp->crp_flags, crp->crp_buf,
+						enccrd->crd_inject, ivsize, ivp);
+		} else {
+			if (enccrd->crd_flags & CRD_F_IV_EXPLICIT)
+				/* IV is provided expicitly in descriptor */
+				memcpy(ivp, enccrd->crd_iv, ivsize);
+			else
+				/* IV is provided in the packet */
+				crypto_copydata(crp->crp_flags, crp->crp_buf,
+						enccrd->crd_inject, ivsize,
+						ivp);
+		}
+	}
+
+	if (maccrd) {
+		switch (maccrd->crd_alg) {
+		case CRYPTO_MD5:
+			pasemi_desc_hdr(&work_desc, XCT_FUN_SIG_MD5 |
+					XCT_FUN_HSZ((crp->crp_ilen - maccrd->crd_inject) / 4));
+			break;
+		case CRYPTO_SHA1:
+			pasemi_desc_hdr(&work_desc, XCT_FUN_SIG_SHA1 |
+					XCT_FUN_HSZ((crp->crp_ilen - maccrd->crd_inject) / 4));
+			break;
+		case CRYPTO_MD5_HMAC:
+			pasemi_desc_hdr(&work_desc, XCT_FUN_SIG_HMAC_MD5 |
+					XCT_FUN_HSZ((crp->crp_ilen - maccrd->crd_inject) / 4));
+			break;
+		case CRYPTO_SHA1_HMAC:
+			pasemi_desc_hdr(&work_desc, XCT_FUN_SIG_HMAC_SHA1 |
+					XCT_FUN_HSZ((crp->crp_ilen - maccrd->crd_inject) / 4));
+			break;
+		default:
+			printk(DRV_NAME ": unimplemented maccrd->crd_alg %d\n",
+			       maccrd->crd_alg);
+			err = -EINVAL;
+			goto errout;
+		}
+	}
+
+	if (crp->crp_flags & CRYPTO_F_SKBUF) {
+		/* using SKB buffers */
+		skb = (struct sk_buff *)crp->crp_buf;
+		if (skb_shinfo(skb)->nr_frags) {
+			printk(DRV_NAME ": skb frags unimplemented\n");
+			err = -EINVAL;
+			goto errout;
+		}
+		pasemi_desc_build(
+			&work_desc,
+			XCT_FUN_DST_PTR(skb->len, pci_map_single(
+						sc->dma_pdev, skb->data,
+						skb->len, DMA_TO_DEVICE)));
+		pasemi_desc_build(
+			&work_desc,
+			XCT_FUN_SRC_PTR(
+				srclen, pci_map_single(
+					sc->dma_pdev, skb->data,
+					srclen, DMA_TO_DEVICE)));
+		pasemi_desc_hdr(&work_desc, XCT_FUN_LLEN(srclen));
+	} else if (crp->crp_flags & CRYPTO_F_IOV) {
+		/* using IOV buffers */
+		uiop = (struct uio *)crp->crp_buf;
+		if (uiop->uio_iovcnt > 1) {
+			printk(DRV_NAME ": iov frags unimplemented\n");
+			err = -EINVAL;
+			goto errout;
+		}
+
+		/* crp_olen is never set; always use crp_ilen */
+		pasemi_desc_build(
+			&work_desc,
+			XCT_FUN_DST_PTR(crp->crp_ilen, pci_map_single(
+						sc->dma_pdev,
+						uiop->uio_iov->iov_base,
+						crp->crp_ilen, DMA_TO_DEVICE)));
+		pasemi_desc_hdr(&work_desc, XCT_FUN_LLEN(srclen));
+
+		pasemi_desc_build(
+			&work_desc,
+			XCT_FUN_SRC_PTR(srclen, pci_map_single(
+						sc->dma_pdev,
+						uiop->uio_iov->iov_base,
+						srclen, DMA_TO_DEVICE)));
+	} else {
+		/* using contig buffers */
+		pasemi_desc_build(
+			&work_desc,
+			XCT_FUN_DST_PTR(crp->crp_ilen, pci_map_single(
+						sc->dma_pdev,
+						crp->crp_buf,
+						crp->crp_ilen, DMA_TO_DEVICE)));
+		pasemi_desc_build(
+			&work_desc,
+			XCT_FUN_SRC_PTR(srclen, pci_map_single(
+						sc->dma_pdev,
+						crp->crp_buf, srclen,
+						DMA_TO_DEVICE)));
+		pasemi_desc_hdr(&work_desc, XCT_FUN_LLEN(srclen));
+	}
+
+	spin_lock_irqsave(&txring->fill_lock, flags);
+
+	if (txring->sesn != PASEMI_SESSION(crp->crp_sid)) {
+		txring->sesn = PASEMI_SESSION(crp->crp_sid);
+		reinit = 1;
+	}
+
+	if (enccrd) {
+		pasemi_desc_start(&init_desc,
+				  XCT_CTRL_HDR(chsel, reinit ? reinit_size : 0x10, DMA_FN_CIV0));
+		pasemi_desc_build(&init_desc,
+				  XCT_FUN_SRC_PTR(reinit ? reinit_size : 0x10, ses->dma_addr));
+	}
+
+	if (((txring->next_to_fill + pasemi_desc_size(&init_desc) +
+	      pasemi_desc_size(&work_desc)) -
+	     txring->next_to_clean) > TX_RING_SIZE) {
+		spin_unlock_irqrestore(&txring->fill_lock, flags);
+		err = ERESTART;
+		goto errout;
+	}
+
+	pasemi_ring_add_desc(txring, &init_desc, NULL);
+	pasemi_ring_add_desc(txring, &work_desc, crp);
+
+	pasemi_ring_incr(sc, chsel,
+			 pasemi_desc_size(&init_desc) +
+			 pasemi_desc_size(&work_desc));
+
+	spin_unlock_irqrestore(&txring->fill_lock, flags);
+
+	mod_timer(&txring->crypto_timer, jiffies + TIMER_INTERVAL);
+
+	return 0;
+
+erralg:
+	printk(DRV_NAME ": unsupported algorithm or algorithm order alg1 %d alg2 %d\n",
+	       crd1->crd_alg, crd2->crd_alg);
+	err = -EINVAL;
+
+errout:
+	if (err != ERESTART) {
+		crp->crp_etype = err;
+		crypto_done(crp);
+	}
+	return err;
+}
+
+static int pasemi_clean_tx(struct pasemi_softc *sc, int chan)
+{
+	int i, j, ring_idx;
+	struct pasemi_fnu_txring *ring = &sc->tx[chan];
+	u16 delta_cnt;
+	int flags, loops = 10;
+	int desc_size;
+	struct cryptop *crp;
+
+	spin_lock_irqsave(&ring->clean_lock, flags);
+
+	while ((delta_cnt = (dma_status->tx_sta[sc->base_chan + chan]
+			     & PAS_STATUS_PCNT_M) - ring->total_pktcnt)
+	       && loops--) {
+
+		for (i = 0; i < delta_cnt; i++) {
+			desc_size = TX_DESC_INFO(ring, ring->next_to_clean).desc_size;
+			crp = TX_DESC_INFO(ring, ring->next_to_clean).cf_crp;
+			if (crp) {
+				ring_idx = 2 * (ring->next_to_clean & (TX_RING_SIZE-1));
+				if (TX_DESC_INFO(ring, ring->next_to_clean).desc_postop & PASEMI_CHECK_SIG) {
+					/* Need to make sure signature matched,
+					 * if not - return error */
+					if (!(ring->desc[ring_idx + 1] & (1ULL << 63)))
+						crp->crp_etype = -EINVAL;
+				}
+				crypto_done(TX_DESC_INFO(ring,
+							 ring->next_to_clean).cf_crp);
+				TX_DESC_INFO(ring, ring->next_to_clean).cf_crp = NULL;
+				pci_unmap_single(
+					sc->dma_pdev,
+					XCT_PTR_ADDR_LEN(ring->desc[ring_idx + 1]),
+					PCI_DMA_TODEVICE);
+
+				ring->desc[ring_idx] = ring->desc[ring_idx + 1] = 0;
+
+				ring->next_to_clean++;
+				for (j = 1; j < desc_size; j++) {
+					ring_idx = 2 *
+						(ring->next_to_clean &
+						 (TX_RING_SIZE-1));
+					pci_unmap_single(
+						sc->dma_pdev,
+						XCT_PTR_ADDR_LEN(ring->desc[ring_idx]),
+						PCI_DMA_TODEVICE);
+					if (ring->desc[ring_idx + 1])
+						pci_unmap_single(
+							sc->dma_pdev,
+							XCT_PTR_ADDR_LEN(
+								ring->desc[
+									ring_idx + 1]),
+							PCI_DMA_TODEVICE);
+					ring->desc[ring_idx] =
+						ring->desc[ring_idx + 1] = 0;
+					ring->next_to_clean++;
+				}
+			} else {
+				for (j = 0; j < desc_size; j++) {
+					ring_idx = 2 * (ring->next_to_clean & (TX_RING_SIZE-1));
+					ring->desc[ring_idx] =
+						ring->desc[ring_idx + 1] = 0;
+					ring->next_to_clean++;
+				}
+			}
+		}
+
+		ring->total_pktcnt += delta_cnt;
+	}
+	spin_unlock_irqrestore(&ring->clean_lock, flags);
+
+	return 0;
+}
+
+static void sweepup_tx(struct pasemi_softc *sc)
+{
+	int i;
+
+	for (i = 0; i < sc->sc_num_channels; i++)
+		pasemi_clean_tx(sc, i);
+}
+
+static irqreturn_t pasemi_intr(int irq, void *arg, struct pt_regs *regs)
+{
+	struct pasemi_softc *sc = arg;
+	unsigned int reg;
+	int chan = irq - sc->base_irq;
+	int chan_index = sc->base_chan + chan;
+	u64 stat = dma_status->tx_sta[chan_index];
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	if (!(stat & PAS_STATUS_CAUSE_M))
+		return IRQ_NONE;
+
+	pasemi_clean_tx(sc, chan);
+
+	stat = dma_status->tx_sta[chan_index];
+
+	reg = PAS_IOB_DMA_TXCH_RESET_PINTC |
+		PAS_IOB_DMA_TXCH_RESET_PCNT(sc->tx[chan].total_pktcnt);
+
+	if (stat & PAS_STATUS_SOFT)
+		reg |= PAS_IOB_DMA_RXCH_RESET_SINTC;
+
+	out_le32(sc->iob_regs + PAS_IOB_DMA_TXCH_RESET(chan_index), reg);
+
+
+	return IRQ_HANDLED;
+}
+
+static int pasemi_dma_setup_tx_resources(struct pasemi_softc *sc, int chan)
+{
+	u32 val;
+	int chan_index = chan + sc->base_chan;
+	int ret;
+	struct pasemi_fnu_txring *ring;
+
+	ring = &sc->tx[chan];
+
+	spin_lock_init(&ring->fill_lock);
+	spin_lock_init(&ring->clean_lock);
+
+	ring->desc_info = kzalloc(sizeof(struct pasemi_desc_info) *
+				  TX_RING_SIZE, GFP_KERNEL);
+	if (!ring->desc_info)
+		return -ENOMEM;
+
+	/* Allocate descriptors */
+	ring->desc = dma_alloc_coherent(&sc->dma_pdev->dev,
+					TX_RING_SIZE *
+					2 * sizeof(u64),
+					&ring->dma, GFP_KERNEL);
+	if (!ring->desc)
+		return -ENOMEM;
+
+	memset((void *) ring->desc, 0, TX_RING_SIZE * 2 * sizeof(u64));
+
+	out_le32(sc->iob_regs + PAS_IOB_DMA_TXCH_RESET(chan_index), 0x30);
+
+	ring->total_pktcnt = 0;
+
+	out_le32(sc->dma_regs + PAS_DMA_TXCHAN_BASEL(chan_index),
+		 PAS_DMA_TXCHAN_BASEL_BRBL(ring->dma));
+
+	val = PAS_DMA_TXCHAN_BASEU_BRBH(ring->dma >> 32);
+	val |= PAS_DMA_TXCHAN_BASEU_SIZ(TX_RING_SIZE >> 2);
+
+	out_le32(sc->dma_regs + PAS_DMA_TXCHAN_BASEU(chan_index), val);
+
+	out_le32(sc->dma_regs + PAS_DMA_TXCHAN_CFG(chan_index),
+		 PAS_DMA_TXCHAN_CFG_TY_FUNC |
+		 PAS_DMA_TXCHAN_CFG_TATTR(chan) |
+		 PAS_DMA_TXCHAN_CFG_WT(2));
+
+	/* enable tx channel */
+	out_le32(sc->dma_regs +
+		 PAS_DMA_TXCHAN_TCMDSTA(chan_index),
+		 PAS_DMA_TXCHAN_TCMDSTA_EN);
+
+	out_le32(sc->iob_regs + PAS_IOB_DMA_TXCH_CFG(chan_index),
+		 PAS_IOB_DMA_TXCH_CFG_CNTTH(1000));
+
+	ring->next_to_fill = 0;
+	ring->next_to_clean = 0;
+
+	snprintf(ring->irq_name, sizeof(ring->irq_name),
+		 "%s%d", "crypto", chan);
+
+	ring->irq = irq_create_mapping(NULL, sc->base_irq + chan);
+	ret = request_irq(ring->irq, (irq_handler_t)
+			  pasemi_intr, IRQF_DISABLED, ring->irq_name, sc);
+	if (ret) {
+		printk(KERN_ERR DRV_NAME ": failed to hook irq %d ret %d\n",
+		       ring->irq, ret);
+		ring->irq = -1;
+		return ret;
+	}
+
+	setup_timer(&ring->crypto_timer, (void *) sweepup_tx, (unsigned long) sc);
+
+	return 0;
+}
+
+static device_method_t pasemi_methods = {
+	/* crypto device methods */
+	DEVMETHOD(cryptodev_newsession,		pasemi_newsession),
+	DEVMETHOD(cryptodev_freesession,	pasemi_freesession),
+	DEVMETHOD(cryptodev_process,		pasemi_process),
+};
+
+/* Set up the crypto device structure, private data,
+ * and anything else we need before we start */
+
+static int __devinit
+pasemi_dma_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	struct pasemi_softc *sc;
+	int ret, i;
+
+	DPRINTF(KERN_ERR "%s()\n", __FUNCTION__);
+
+	sc = kzalloc(sizeof(*sc), GFP_KERNEL);
+	if (!sc)
+		return -ENOMEM;
+
+	softc_device_init(sc, DRV_NAME, 1, pasemi_methods);
+
+	pci_set_drvdata(pdev, sc);
+
+	spin_lock_init(&sc->sc_chnlock);
+
+	sc->sc_sessions = (struct pasemi_session **)
+		kzalloc(PASEMI_INITIAL_SESSIONS *
+			sizeof(struct pasemi_session *), GFP_ATOMIC);
+	if (sc->sc_sessions == NULL) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	sc->sc_nsessions = PASEMI_INITIAL_SESSIONS;
+	sc->sc_lastchn = 0;
+	sc->base_irq = pdev->irq + 6;
+	sc->base_chan = 6;
+	sc->sc_cid = -1;
+	sc->dma_pdev = pdev;
+
+	sc->iob_pdev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa001, NULL);
+	if (!sc->iob_pdev) {
+		dev_err(&pdev->dev, "Can't find I/O Bridge\n");
+		ret = -ENODEV;
+		goto out;
+	}
+
+	/* This is hardcoded and ugly, but we have some firmware versions
+	 * who don't provide the register space in the device tree. Luckily
+	 * they are at well-known locations so we can just do the math here.
+	 */
+	sc->dma_regs =
+		ioremap(0xe0000000 + (sc->dma_pdev->devfn << 12), 0x2000);
+	sc->iob_regs =
+		ioremap(0xe0000000 + (sc->iob_pdev->devfn << 12), 0x2000);
+	if (!sc->dma_regs || !sc->iob_regs) {
+		dev_err(&pdev->dev, "Can't map registers\n");
+		ret = -ENODEV;
+		goto out;
+	}
+
+	dma_status = __ioremap(0xfd800000, 0x1000, 0);
+	if (!dma_status) {
+		ret = -ENODEV;
+		dev_err(&pdev->dev, "Can't map dmastatus space\n");
+		goto out;
+	}
+
+	sc->tx = (struct pasemi_fnu_txring *)
+		kzalloc(sizeof(struct pasemi_fnu_txring)
+			* 8, GFP_KERNEL);
+	if (!sc->tx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/* Initialize the h/w */
+	out_le32(sc->dma_regs + PAS_DMA_COM_CFG,
+		 (in_le32(sc->dma_regs + PAS_DMA_COM_CFG) |
+		  PAS_DMA_COM_CFG_FWF));
+	out_le32(sc->dma_regs + PAS_DMA_COM_TXCMD, PAS_DMA_COM_TXCMD_EN);
+
+	for (i = 0; i < PASEMI_FNU_CHANNELS; i++) {
+		sc->sc_num_channels++;
+		ret = pasemi_dma_setup_tx_resources(sc, i);
+		if (ret)
+			goto out;
+	}
+
+	sc->sc_cid = crypto_get_driverid(softc_get_device(sc),
+					 CRYPTOCAP_F_HARDWARE);
+	if (sc->sc_cid < 0) {
+		printk(KERN_ERR DRV_NAME ": could not get crypto driver id\n");
+		ret = -ENXIO;
+		goto out;
+	}
+
+	/* register algorithms with the framework */
+	printk(DRV_NAME ":");
+
+	crypto_register(sc->sc_cid, CRYPTO_DES_CBC, 0, 0);
+	crypto_register(sc->sc_cid, CRYPTO_3DES_CBC, 0, 0);
+	crypto_register(sc->sc_cid, CRYPTO_AES_CBC, 0, 0);
+	crypto_register(sc->sc_cid, CRYPTO_ARC4, 0, 0);
+	crypto_register(sc->sc_cid, CRYPTO_SHA1, 0, 0);
+	crypto_register(sc->sc_cid, CRYPTO_MD5, 0, 0);
+	crypto_register(sc->sc_cid, CRYPTO_SHA1_HMAC, 0, 0);
+	crypto_register(sc->sc_cid, CRYPTO_MD5_HMAC, 0, 0);
+
+	return 0;
+
+out:
+	pasemi_dma_remove(pdev);
+	return ret;
+}
+
+#define MAX_RETRIES 5000
+
+static void pasemi_free_tx_resources(struct pasemi_softc *sc, int chan)
+{
+	struct pasemi_fnu_txring *ring = &sc->tx[chan];
+	int chan_index = chan + sc->base_chan;
+	int retries;
+	u32 stat;
+
+	/* Stop the channel */
+	out_le32(sc->dma_regs +
+		 PAS_DMA_TXCHAN_TCMDSTA(chan_index),
+		 PAS_DMA_TXCHAN_TCMDSTA_ST);
+
+	for (retries = 0; retries < MAX_RETRIES; retries++) {
+		stat = in_le32(sc->dma_regs +
+			       PAS_DMA_TXCHAN_TCMDSTA(chan_index));
+		if (!(stat & PAS_DMA_TXCHAN_TCMDSTA_ACT))
+			break;
+		cond_resched();
+	}
+
+	if (stat & PAS_DMA_TXCHAN_TCMDSTA_ACT)
+		dev_err(&sc->dma_pdev->dev, "Failed to stop tx channel %d\n",
+			chan_index);
+
+	/* Disable the channel */
+	out_le32(sc->dma_regs +
+		 PAS_DMA_TXCHAN_TCMDSTA(chan_index),
+		 0);
+
+	if (ring->desc_info)
+		kfree((void *) ring->desc_info);
+	if (ring->desc)
+		dma_free_coherent(&sc->dma_pdev->dev,
+				  TX_RING_SIZE *
+				  2 * sizeof(u64),
+				  (void *) ring->desc, ring->dma);
+	if (ring->irq != -1)
+		free_irq(ring->irq, sc);
+
+	del_timer(&ring->crypto_timer);
+}
+
+static void __devexit pasemi_dma_remove(struct pci_dev *pdev)
+{
+	struct pasemi_softc *sc = pci_get_drvdata(pdev);
+	int i;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	if (sc->sc_cid >= 0) {
+		crypto_unregister_all(sc->sc_cid);
+	}
+
+	if (sc->tx) {
+		for (i = 0; i < sc->sc_num_channels; i++)
+			pasemi_free_tx_resources(sc, i);
+
+		kfree(sc->tx);
+	}
+	if (sc->sc_sessions) {
+		for (i = 0; i < sc->sc_nsessions; i++)
+			kfree(sc->sc_sessions[i]);
+		kfree(sc->sc_sessions);
+	}
+	if (sc->iob_pdev)
+		pci_dev_put(sc->iob_pdev);
+	if (sc->dma_regs)
+		iounmap(sc->dma_regs);
+	if (sc->iob_regs)
+		iounmap(sc->iob_regs);
+	kfree(sc);
+}
+
+static struct pci_device_id pasemi_dma_pci_tbl[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_PASEMI, 0xa007) },
+};
+
+MODULE_DEVICE_TABLE(pci, pasemi_dma_pci_tbl);
+
+static struct pci_driver pasemi_dma_driver = {
+	.name		= "pasemi_dma",
+	.id_table	= pasemi_dma_pci_tbl,
+	.probe		= pasemi_dma_probe,
+	.remove		= __devexit_p(pasemi_dma_remove),
+};
+
+static void __exit pasemi_dma_cleanup_module(void)
+{
+	pci_unregister_driver(&pasemi_dma_driver);
+	__iounmap(dma_status);
+	dma_status = NULL;
+}
+
+int pasemi_dma_init_module(void)
+{
+	return pci_register_driver(&pasemi_dma_driver);
+}
+
+module_init(pasemi_dma_init_module);
+module_exit(pasemi_dma_cleanup_module);
+
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_AUTHOR("Egor Martovetsky egor@pasemi.com");
+MODULE_DESCRIPTION("OCF driver for PA Semi PWRficient DMA Crypto Engine");
diff --git a/target/linux/generic/files/crypto/ocf/pasemi/pasemi_fnu.h b/target/linux/generic/files/crypto/ocf/pasemi/pasemi_fnu.h
new file mode 100644
index 0000000000..1a0dcc8bbd
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/pasemi/pasemi_fnu.h
@@ -0,0 +1,410 @@
+/*
+ * Copyright (C) 2007 PA Semi, Inc
+ *
+ * Driver for the PA Semi PWRficient DMA Crypto Engine, soft state and
+ * hardware register layouts.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef PASEMI_FNU_H
+#define PASEMI_FNU_H
+
+#include <linux/spinlock.h>
+
+#define	PASEMI_SESSION(sid)	((sid) & 0xffffffff)
+#define	PASEMI_SID(sesn)	((sesn) & 0xffffffff)
+#define	DPRINTF(a...)	if (debug) { printk(DRV_NAME ": " a); }
+
+/* Must be a power of two */
+#define RX_RING_SIZE 512
+#define TX_RING_SIZE 512
+#define TX_DESC(ring, num)	((ring)->desc[2 * (num & (TX_RING_SIZE-1))])
+#define TX_DESC_INFO(ring, num)	((ring)->desc_info[(num) & (TX_RING_SIZE-1)])
+#define MAX_DESC_SIZE 8
+#define PASEMI_INITIAL_SESSIONS 10
+#define PASEMI_FNU_CHANNELS 8
+
+/* DMA descriptor */
+struct pasemi_desc {
+	u64 quad[2*MAX_DESC_SIZE];
+	int quad_cnt;
+	int size;
+	int postop;
+};
+
+/*
+ * Holds per descriptor data
+ */
+struct pasemi_desc_info {
+	int			desc_size;
+	int			desc_postop;
+#define PASEMI_CHECK_SIG 0x1
+
+	struct cryptop          *cf_crp;
+};
+
+/*
+ * Holds per channel data
+ */
+struct pasemi_fnu_txring {
+	volatile u64		*desc;
+	volatile struct
+	pasemi_desc_info	*desc_info;
+	dma_addr_t		dma;
+	struct timer_list       crypto_timer;
+	spinlock_t		fill_lock;
+	spinlock_t		clean_lock;
+	unsigned int		next_to_fill;
+	unsigned int		next_to_clean;
+	u16			total_pktcnt;
+	int			irq;
+	int			sesn;
+	char			irq_name[10];
+};
+
+/*
+ * Holds data specific to a single pasemi device.
+ */
+struct pasemi_softc {
+	softc_device_decl	sc_cdev;
+	struct pci_dev		*dma_pdev;	/* device backpointer */
+	struct pci_dev		*iob_pdev;	/* device backpointer */
+	void __iomem		*dma_regs;
+	void __iomem		*iob_regs;
+	int			base_irq;
+	int			base_chan;
+	int32_t			sc_cid;		/* crypto tag */
+	int			sc_nsessions;
+	struct pasemi_session	**sc_sessions;
+	int			sc_num_channels;/* number of crypto channels */
+
+	/* pointer to the array of txring datastructures, one txring per channel */
+	struct pasemi_fnu_txring *tx;
+
+	/*
+	 * mutual exclusion for the channel scheduler
+	 */
+	spinlock_t		sc_chnlock;
+	/* last channel used, for now use round-robin to allocate channels */
+	int			sc_lastchn;
+};
+
+struct pasemi_session {
+	u64 civ[2];
+	u64 keysz;
+	u64 key[4];
+	u64 ccmd;
+	u64 hkey[4];
+	u64 hseq;
+	u64 giv[2];
+	u64 hiv[4];
+
+	int used;
+	dma_addr_t	dma_addr;
+	int chan;
+};
+
+/* status register layout in IOB region, at 0xfd800000 */
+struct pasdma_status {
+	u64 rx_sta[64];
+	u64 tx_sta[20];
+};
+
+#define ALG_IS_CIPHER(alg) ((alg == CRYPTO_DES_CBC)		|| \
+				(alg == CRYPTO_3DES_CBC)	|| \
+				(alg == CRYPTO_AES_CBC)		|| \
+				(alg == CRYPTO_ARC4)		|| \
+				(alg == CRYPTO_NULL_CBC))
+
+#define ALG_IS_SIG(alg) ((alg == CRYPTO_MD5)			|| \
+				(alg == CRYPTO_MD5_HMAC)	|| \
+				(alg == CRYPTO_SHA1)		|| \
+				(alg == CRYPTO_SHA1_HMAC)	|| \
+				(alg == CRYPTO_NULL_HMAC))
+
+enum {
+	PAS_DMA_COM_TXCMD = 0x100,	/* Transmit Command Register  */
+	PAS_DMA_COM_TXSTA = 0x104,	/* Transmit Status Register   */
+	PAS_DMA_COM_RXCMD = 0x108,	/* Receive Command Register   */
+	PAS_DMA_COM_RXSTA = 0x10c,	/* Receive Status Register    */
+	PAS_DMA_COM_CFG   = 0x114,	/* DMA Configuration Register */
+};
+
+/* All these registers live in the PCI configuration space for the DMA PCI
+ * device. Use the normal PCI config access functions for them.
+ */
+
+#define PAS_DMA_COM_CFG_FWF	0x18000000
+
+#define PAS_DMA_COM_TXCMD_EN	0x00000001 /* enable */
+#define PAS_DMA_COM_TXSTA_ACT	0x00000001 /* active */
+#define PAS_DMA_COM_RXCMD_EN	0x00000001 /* enable */
+#define PAS_DMA_COM_RXSTA_ACT	0x00000001 /* active */
+
+#define _PAS_DMA_TXCHAN_STRIDE	0x20    /* Size per channel		*/
+#define _PAS_DMA_TXCHAN_TCMDSTA	0x300	/* Command / Status		*/
+#define _PAS_DMA_TXCHAN_CFG	0x304	/* Configuration		*/
+#define _PAS_DMA_TXCHAN_DSCRBU	0x308	/* Descriptor BU Allocation	*/
+#define _PAS_DMA_TXCHAN_INCR	0x310	/* Descriptor increment		*/
+#define _PAS_DMA_TXCHAN_CNT	0x314	/* Descriptor count/offset	*/
+#define _PAS_DMA_TXCHAN_BASEL	0x318	/* Descriptor ring base (low)	*/
+#define _PAS_DMA_TXCHAN_BASEU	0x31c	/*			(high)	*/
+#define PAS_DMA_TXCHAN_TCMDSTA(c) (0x300+(c)*_PAS_DMA_TXCHAN_STRIDE)
+#define    PAS_DMA_TXCHAN_TCMDSTA_EN	0x00000001	/* Enabled */
+#define    PAS_DMA_TXCHAN_TCMDSTA_ST	0x00000002	/* Stop interface */
+#define    PAS_DMA_TXCHAN_TCMDSTA_ACT	0x00010000	/* Active */
+#define PAS_DMA_TXCHAN_CFG(c)     (0x304+(c)*_PAS_DMA_TXCHAN_STRIDE)
+#define    PAS_DMA_TXCHAN_CFG_TY_FUNC	0x00000002	/* Type = interface */
+#define    PAS_DMA_TXCHAN_CFG_TY_IFACE	0x00000000	/* Type = interface */
+#define    PAS_DMA_TXCHAN_CFG_TATTR_M	0x0000003c
+#define    PAS_DMA_TXCHAN_CFG_TATTR_S	2
+#define    PAS_DMA_TXCHAN_CFG_TATTR(x)	(((x) << PAS_DMA_TXCHAN_CFG_TATTR_S) & \
+					 PAS_DMA_TXCHAN_CFG_TATTR_M)
+#define    PAS_DMA_TXCHAN_CFG_WT_M	0x000001c0
+#define    PAS_DMA_TXCHAN_CFG_WT_S	6
+#define    PAS_DMA_TXCHAN_CFG_WT(x)	(((x) << PAS_DMA_TXCHAN_CFG_WT_S) & \
+					 PAS_DMA_TXCHAN_CFG_WT_M)
+#define    PAS_DMA_TXCHAN_CFG_LPSQ_FAST	0x00000400
+#define    PAS_DMA_TXCHAN_CFG_LPDQ_FAST	0x00000800
+#define    PAS_DMA_TXCHAN_CFG_CF	0x00001000	/* Clean first line */
+#define    PAS_DMA_TXCHAN_CFG_CL	0x00002000	/* Clean last line */
+#define    PAS_DMA_TXCHAN_CFG_UP	0x00004000	/* update tx descr when sent */
+#define PAS_DMA_TXCHAN_INCR(c)    (0x310+(c)*_PAS_DMA_TXCHAN_STRIDE)
+#define PAS_DMA_TXCHAN_BASEL(c)   (0x318+(c)*_PAS_DMA_TXCHAN_STRIDE)
+#define    PAS_DMA_TXCHAN_BASEL_BRBL_M	0xffffffc0
+#define    PAS_DMA_TXCHAN_BASEL_BRBL_S	0
+#define    PAS_DMA_TXCHAN_BASEL_BRBL(x)	(((x) << PAS_DMA_TXCHAN_BASEL_BRBL_S) & \
+					 PAS_DMA_TXCHAN_BASEL_BRBL_M)
+#define PAS_DMA_TXCHAN_BASEU(c)   (0x31c+(c)*_PAS_DMA_TXCHAN_STRIDE)
+#define    PAS_DMA_TXCHAN_BASEU_BRBH_M	0x00000fff
+#define    PAS_DMA_TXCHAN_BASEU_BRBH_S	0
+#define    PAS_DMA_TXCHAN_BASEU_BRBH(x)	(((x) << PAS_DMA_TXCHAN_BASEU_BRBH_S) & \
+					 PAS_DMA_TXCHAN_BASEU_BRBH_M)
+/* # of cache lines worth of buffer ring */
+#define    PAS_DMA_TXCHAN_BASEU_SIZ_M	0x3fff0000
+#define    PAS_DMA_TXCHAN_BASEU_SIZ_S	16		/* 0 = 16K */
+#define    PAS_DMA_TXCHAN_BASEU_SIZ(x)	(((x) << PAS_DMA_TXCHAN_BASEU_SIZ_S) & \
+					 PAS_DMA_TXCHAN_BASEU_SIZ_M)
+
+#define    PAS_STATUS_PCNT_M		0x000000000000ffffull
+#define    PAS_STATUS_PCNT_S		0
+#define    PAS_STATUS_DCNT_M		0x00000000ffff0000ull
+#define    PAS_STATUS_DCNT_S		16
+#define    PAS_STATUS_BPCNT_M		0x0000ffff00000000ull
+#define    PAS_STATUS_BPCNT_S		32
+#define    PAS_STATUS_CAUSE_M		0xf000000000000000ull
+#define    PAS_STATUS_TIMER		0x1000000000000000ull
+#define    PAS_STATUS_ERROR		0x2000000000000000ull
+#define    PAS_STATUS_SOFT		0x4000000000000000ull
+#define    PAS_STATUS_INT		0x8000000000000000ull
+
+#define PAS_IOB_DMA_RXCH_CFG(i)		(0x1100 + (i)*4)
+#define    PAS_IOB_DMA_RXCH_CFG_CNTTH_M		0x00000fff
+#define    PAS_IOB_DMA_RXCH_CFG_CNTTH_S		0
+#define    PAS_IOB_DMA_RXCH_CFG_CNTTH(x)	(((x) << PAS_IOB_DMA_RXCH_CFG_CNTTH_S) & \
+						 PAS_IOB_DMA_RXCH_CFG_CNTTH_M)
+#define PAS_IOB_DMA_TXCH_CFG(i)		(0x1200 + (i)*4)
+#define    PAS_IOB_DMA_TXCH_CFG_CNTTH_M		0x00000fff
+#define    PAS_IOB_DMA_TXCH_CFG_CNTTH_S		0
+#define    PAS_IOB_DMA_TXCH_CFG_CNTTH(x)	(((x) << PAS_IOB_DMA_TXCH_CFG_CNTTH_S) & \
+						 PAS_IOB_DMA_TXCH_CFG_CNTTH_M)
+#define PAS_IOB_DMA_RXCH_STAT(i)	(0x1300 + (i)*4)
+#define    PAS_IOB_DMA_RXCH_STAT_INTGEN	0x00001000
+#define    PAS_IOB_DMA_RXCH_STAT_CNTDEL_M	0x00000fff
+#define    PAS_IOB_DMA_RXCH_STAT_CNTDEL_S	0
+#define    PAS_IOB_DMA_RXCH_STAT_CNTDEL(x)	(((x) << PAS_IOB_DMA_RXCH_STAT_CNTDEL_S) &\
+						 PAS_IOB_DMA_RXCH_STAT_CNTDEL_M)
+#define PAS_IOB_DMA_TXCH_STAT(i)	(0x1400 + (i)*4)
+#define    PAS_IOB_DMA_TXCH_STAT_INTGEN	0x00001000
+#define    PAS_IOB_DMA_TXCH_STAT_CNTDEL_M	0x00000fff
+#define    PAS_IOB_DMA_TXCH_STAT_CNTDEL_S	0
+#define    PAS_IOB_DMA_TXCH_STAT_CNTDEL(x)	(((x) << PAS_IOB_DMA_TXCH_STAT_CNTDEL_S) &\
+						 PAS_IOB_DMA_TXCH_STAT_CNTDEL_M)
+#define PAS_IOB_DMA_RXCH_RESET(i)	(0x1500 + (i)*4)
+#define    PAS_IOB_DMA_RXCH_RESET_PCNT_M	0xffff0000
+#define    PAS_IOB_DMA_RXCH_RESET_PCNT_S	16
+#define    PAS_IOB_DMA_RXCH_RESET_PCNT(x)	(((x) << PAS_IOB_DMA_RXCH_RESET_PCNT_S) & \
+						 PAS_IOB_DMA_RXCH_RESET_PCNT_M)
+#define    PAS_IOB_DMA_RXCH_RESET_PCNTRST	0x00000020
+#define    PAS_IOB_DMA_RXCH_RESET_DCNTRST	0x00000010
+#define    PAS_IOB_DMA_RXCH_RESET_TINTC		0x00000008
+#define    PAS_IOB_DMA_RXCH_RESET_DINTC		0x00000004
+#define    PAS_IOB_DMA_RXCH_RESET_SINTC		0x00000002
+#define    PAS_IOB_DMA_RXCH_RESET_PINTC		0x00000001
+#define PAS_IOB_DMA_TXCH_RESET(i)	(0x1600 + (i)*4)
+#define    PAS_IOB_DMA_TXCH_RESET_PCNT_M	0xffff0000
+#define    PAS_IOB_DMA_TXCH_RESET_PCNT_S	16
+#define    PAS_IOB_DMA_TXCH_RESET_PCNT(x)	(((x) << PAS_IOB_DMA_TXCH_RESET_PCNT_S) & \
+						 PAS_IOB_DMA_TXCH_RESET_PCNT_M)
+#define    PAS_IOB_DMA_TXCH_RESET_PCNTRST	0x00000020
+#define    PAS_IOB_DMA_TXCH_RESET_DCNTRST	0x00000010
+#define    PAS_IOB_DMA_TXCH_RESET_TINTC		0x00000008
+#define    PAS_IOB_DMA_TXCH_RESET_DINTC		0x00000004
+#define    PAS_IOB_DMA_TXCH_RESET_SINTC		0x00000002
+#define    PAS_IOB_DMA_TXCH_RESET_PINTC		0x00000001
+
+#define PAS_IOB_DMA_COM_TIMEOUTCFG		0x1700
+#define    PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_M	0x00ffffff
+#define    PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_S	0
+#define    PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(x)	(((x) << PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_S) & \
+						 PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_M)
+
+/* Transmit descriptor fields */
+#define	XCT_MACTX_T		0x8000000000000000ull
+#define	XCT_MACTX_ST		0x4000000000000000ull
+#define XCT_MACTX_NORES		0x0000000000000000ull
+#define XCT_MACTX_8BRES		0x1000000000000000ull
+#define XCT_MACTX_24BRES	0x2000000000000000ull
+#define XCT_MACTX_40BRES	0x3000000000000000ull
+#define XCT_MACTX_I		0x0800000000000000ull
+#define XCT_MACTX_O		0x0400000000000000ull
+#define XCT_MACTX_E		0x0200000000000000ull
+#define XCT_MACTX_VLAN_M	0x0180000000000000ull
+#define XCT_MACTX_VLAN_NOP	0x0000000000000000ull
+#define XCT_MACTX_VLAN_REMOVE	0x0080000000000000ull
+#define XCT_MACTX_VLAN_INSERT   0x0100000000000000ull
+#define XCT_MACTX_VLAN_REPLACE  0x0180000000000000ull
+#define XCT_MACTX_CRC_M		0x0060000000000000ull
+#define XCT_MACTX_CRC_NOP	0x0000000000000000ull
+#define XCT_MACTX_CRC_INSERT	0x0020000000000000ull
+#define XCT_MACTX_CRC_PAD	0x0040000000000000ull
+#define XCT_MACTX_CRC_REPLACE	0x0060000000000000ull
+#define XCT_MACTX_SS		0x0010000000000000ull
+#define XCT_MACTX_LLEN_M	0x00007fff00000000ull
+#define XCT_MACTX_LLEN_S	32ull
+#define XCT_MACTX_LLEN(x)	((((long)(x)) << XCT_MACTX_LLEN_S) & \
+				 XCT_MACTX_LLEN_M)
+#define XCT_MACTX_IPH_M		0x00000000f8000000ull
+#define XCT_MACTX_IPH_S		27ull
+#define XCT_MACTX_IPH(x)	((((long)(x)) << XCT_MACTX_IPH_S) & \
+				 XCT_MACTX_IPH_M)
+#define XCT_MACTX_IPO_M		0x0000000007c00000ull
+#define XCT_MACTX_IPO_S		22ull
+#define XCT_MACTX_IPO(x)	((((long)(x)) << XCT_MACTX_IPO_S) & \
+				 XCT_MACTX_IPO_M)
+#define XCT_MACTX_CSUM_M	0x0000000000000060ull
+#define XCT_MACTX_CSUM_NOP	0x0000000000000000ull
+#define XCT_MACTX_CSUM_TCP	0x0000000000000040ull
+#define XCT_MACTX_CSUM_UDP	0x0000000000000060ull
+#define XCT_MACTX_V6		0x0000000000000010ull
+#define XCT_MACTX_C		0x0000000000000004ull
+#define XCT_MACTX_AL2		0x0000000000000002ull
+
+#define XCT_PTR_T		0x8000000000000000ull
+#define XCT_PTR_LEN_M		0x7ffff00000000000ull
+#define XCT_PTR_LEN_S		44
+#define XCT_PTR_LEN(x)		((((long)(x)) << XCT_PTR_LEN_S) & \
+				 XCT_PTR_LEN_M)
+#define XCT_PTR_ADDR_M		0x00000fffffffffffull
+#define XCT_PTR_ADDR_S		0
+#define XCT_PTR_ADDR(x)		((((long)(x)) << XCT_PTR_ADDR_S) & \
+				 XCT_PTR_ADDR_M)
+
+/* Function descriptor fields */
+#define	XCT_FUN_T		0x8000000000000000ull
+#define	XCT_FUN_ST		0x4000000000000000ull
+#define XCT_FUN_NORES		0x0000000000000000ull
+#define XCT_FUN_8BRES		0x1000000000000000ull
+#define XCT_FUN_24BRES		0x2000000000000000ull
+#define XCT_FUN_40BRES		0x3000000000000000ull
+#define XCT_FUN_I		0x0800000000000000ull
+#define XCT_FUN_O		0x0400000000000000ull
+#define XCT_FUN_E		0x0200000000000000ull
+#define XCT_FUN_FUN_S		54
+#define XCT_FUN_FUN_M		0x01c0000000000000ull
+#define XCT_FUN_FUN(num)	((((long)(num)) << XCT_FUN_FUN_S) & \
+				XCT_FUN_FUN_M)
+#define XCT_FUN_CRM_NOP		0x0000000000000000ull
+#define XCT_FUN_CRM_SIG		0x0008000000000000ull
+#define XCT_FUN_CRM_ENC		0x0010000000000000ull
+#define XCT_FUN_CRM_DEC		0x0018000000000000ull
+#define XCT_FUN_CRM_SIG_ENC	0x0020000000000000ull
+#define XCT_FUN_CRM_ENC_SIG	0x0028000000000000ull
+#define XCT_FUN_CRM_SIG_DEC	0x0030000000000000ull
+#define XCT_FUN_CRM_DEC_SIG	0x0038000000000000ull
+#define XCT_FUN_LLEN_M		0x0007ffff00000000ull
+#define XCT_FUN_LLEN_S		32ULL
+#define XCT_FUN_LLEN(x)		((((long)(x)) << XCT_FUN_LLEN_S) & \
+				 XCT_FUN_LLEN_M)
+#define XCT_FUN_SHL_M		0x00000000f8000000ull
+#define XCT_FUN_SHL_S		27ull
+#define XCT_FUN_SHL(x)		((((long)(x)) << XCT_FUN_SHL_S) & \
+				 XCT_FUN_SHL_M)
+#define XCT_FUN_CHL_M		0x0000000007c00000ull
+#define XCT_FUN_CHL_S		22ull
+#define XCT_FUN_CHL(x)		((((long)(x)) << XCT_FUN_CHL_S) & \
+				 XCT_FUN_CHL_M)
+#define XCT_FUN_HSZ_M		0x00000000003c0000ull
+#define XCT_FUN_HSZ_S		18ull
+#define XCT_FUN_HSZ(x)		((((long)(x)) << XCT_FUN_HSZ_S) & \
+				 XCT_FUN_HSZ_M)
+#define XCT_FUN_ALG_DES		0x0000000000000000ull
+#define XCT_FUN_ALG_3DES	0x0000000000008000ull
+#define XCT_FUN_ALG_AES		0x0000000000010000ull
+#define XCT_FUN_ALG_ARC		0x0000000000018000ull
+#define XCT_FUN_ALG_KASUMI	0x0000000000020000ull
+#define XCT_FUN_BCM_ECB		0x0000000000000000ull
+#define XCT_FUN_BCM_CBC		0x0000000000001000ull
+#define XCT_FUN_BCM_CFB		0x0000000000002000ull
+#define XCT_FUN_BCM_OFB		0x0000000000003000ull
+#define XCT_FUN_BCM_CNT		0x0000000000003800ull
+#define XCT_FUN_BCM_KAS_F8	0x0000000000002800ull
+#define XCT_FUN_BCM_KAS_F9	0x0000000000001800ull
+#define XCT_FUN_BCP_NO_PAD	0x0000000000000000ull
+#define XCT_FUN_BCP_ZRO		0x0000000000000200ull
+#define XCT_FUN_BCP_PL		0x0000000000000400ull
+#define XCT_FUN_BCP_INCR	0x0000000000000600ull
+#define XCT_FUN_SIG_MD5		(0ull << 4)
+#define XCT_FUN_SIG_SHA1	(2ull << 4)
+#define XCT_FUN_SIG_HMAC_MD5	(8ull << 4)
+#define XCT_FUN_SIG_HMAC_SHA1	(10ull << 4)
+#define XCT_FUN_A		0x0000000000000008ull
+#define XCT_FUN_C		0x0000000000000004ull
+#define XCT_FUN_AL2		0x0000000000000002ull
+#define XCT_FUN_SE		0x0000000000000001ull
+
+#define XCT_FUN_SRC_PTR(len, addr)	(XCT_PTR_LEN(len) | XCT_PTR_ADDR(addr))
+#define XCT_FUN_DST_PTR(len, addr)	(XCT_FUN_SRC_PTR(len, addr) | \
+					0x8000000000000000ull)
+
+#define XCT_CTRL_HDR_FUN_NUM_M		0x01c0000000000000ull
+#define XCT_CTRL_HDR_FUN_NUM_S		54
+#define XCT_CTRL_HDR_LEN_M		0x0007ffff00000000ull
+#define XCT_CTRL_HDR_LEN_S		32
+#define XCT_CTRL_HDR_REG_M		0x00000000000000ffull
+#define XCT_CTRL_HDR_REG_S		0
+
+#define XCT_CTRL_HDR(funcN,len,reg)	(0x9400000000000000ull | \
+			((((long)(funcN)) << XCT_CTRL_HDR_FUN_NUM_S) \
+			& XCT_CTRL_HDR_FUN_NUM_M) | \
+			((((long)(len)) << \
+			XCT_CTRL_HDR_LEN_S) & XCT_CTRL_HDR_LEN_M) | \
+			((((long)(reg)) << \
+			XCT_CTRL_HDR_REG_S) & XCT_CTRL_HDR_REG_M))
+
+/* Function config command options */
+#define	DMA_CALGO_DES			0x00
+#define	DMA_CALGO_3DES			0x01
+#define	DMA_CALGO_AES			0x02
+#define	DMA_CALGO_ARC			0x03
+
+#define DMA_FN_CIV0			0x02
+#define DMA_FN_CIV1			0x03
+#define DMA_FN_HKEY0			0x0a
+
+#define XCT_PTR_ADDR_LEN(ptr)		((ptr) & XCT_PTR_ADDR_M), \
+			(((ptr) & XCT_PTR_LEN_M) >> XCT_PTR_LEN_S)
+
+#endif /* PASEMI_FNU_H */
diff --git a/target/linux/generic/files/crypto/ocf/random.c b/target/linux/generic/files/crypto/ocf/random.c
new file mode 100644
index 0000000000..38dad13d77
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/random.c
@@ -0,0 +1,322 @@
+/*
+ * A system independant way of adding entropy to the kernels pool
+ * this way the drivers can focus on the real work and we can take
+ * care of pushing it to the appropriate place in the kernel.
+ *
+ * This should be fast and callable from timers/interrupts
+ *
+ * Written by David McCullough <david_mccullough@mcafee.com>
+ * Copyright (C) 2006-2010 David McCullough
+ * Copyright (C) 2004-2005 Intel Corporation.
+ *
+ * LICENSE TERMS
+ *
+ * The free distribution and use of this software in both source and binary
+ * form is allowed (with or without changes) provided that:
+ *
+ *   1. distributions of this source code include the above copyright
+ *      notice, this list of conditions and the following disclaimer;
+ *
+ *   2. distributions in binary form include the above copyright
+ *      notice, this list of conditions and the following disclaimer
+ *      in the documentation and/or other associated materials;
+ *
+ *   3. the copyright holder's name is not used to endorse products
+ *      built using this software without specific written permission.
+ *
+ * ALTERNATIVELY, provided that this notice is retained in full, this product
+ * may be distributed under the terms of the GNU General Public License (GPL),
+ * in which case the provisions of the GPL apply INSTEAD OF those given above.
+ *
+ * DISCLAIMER
+ *
+ * This software is provided 'as is' with no explicit or implied warranties
+ * in respect of its properties, including, but not limited to, correctness
+ * and/or fitness for purpose.
+ */
+
+#ifndef AUTOCONF_INCLUDED
+#include <linux/config.h>
+#endif
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/wait.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/version.h>
+#include <linux/unistd.h>
+#include <linux/poll.h>
+#include <linux/random.h>
+#include <cryptodev.h>
+
+#ifdef CONFIG_OCF_FIPS
+#include "rndtest.h"
+#endif
+
+#ifndef HAS_RANDOM_INPUT_WAIT
+#error "Please do not enable OCF_RANDOMHARVEST unless you have applied patches"
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
+#include <linux/sched.h>
+#define	kill_proc(p,s,v)	send_sig(s,find_task_by_vpid(p),0)
+#endif
+
+/*
+ * a hack to access the debug levels from the crypto driver
+ */
+extern int crypto_debug;
+#define debug crypto_debug
+
+/*
+ * a list of all registered random providers
+ */
+static LIST_HEAD(random_ops);
+static int started = 0;
+static int initted = 0;
+
+struct random_op {
+	struct list_head random_list;
+	u_int32_t driverid;
+	int (*read_random)(void *arg, u_int32_t *buf, int len);
+	void *arg;
+};
+
+static int random_proc(void *arg);
+
+static pid_t		randomproc = (pid_t) -1;
+static spinlock_t	random_lock;
+
+/*
+ * just init the spin locks
+ */
+static int
+crypto_random_init(void)
+{
+	spin_lock_init(&random_lock);
+	initted = 1;
+	return(0);
+}
+
+/*
+ * Add the given random reader to our list (if not present)
+ * and start the thread (if not already started)
+ *
+ * we have to assume that driver id is ok for now
+ */
+int
+crypto_rregister(
+	u_int32_t driverid,
+	int (*read_random)(void *arg, u_int32_t *buf, int len),
+	void *arg)
+{
+	unsigned long flags;
+	int ret = 0;
+	struct random_op	*rops, *tmp;
+
+	dprintk("%s,%d: %s(0x%x, %p, %p)\n", __FILE__, __LINE__,
+			__FUNCTION__, driverid, read_random, arg);
+
+	if (!initted)
+		crypto_random_init();
+
+#if 0
+	struct cryptocap	*cap;
+
+	cap = crypto_checkdriver(driverid);
+	if (!cap)
+		return EINVAL;
+#endif
+
+	list_for_each_entry_safe(rops, tmp, &random_ops, random_list) {
+		if (rops->driverid == driverid && rops->read_random == read_random)
+			return EEXIST;
+	}
+
+	rops = (struct random_op *) kmalloc(sizeof(*rops), GFP_KERNEL);
+	if (!rops)
+		return ENOMEM;
+
+	rops->driverid    = driverid;
+	rops->read_random = read_random;
+	rops->arg = arg;
+
+	spin_lock_irqsave(&random_lock, flags);
+	list_add_tail(&rops->random_list, &random_ops);
+	if (!started) {
+		randomproc = kernel_thread(random_proc, NULL, CLONE_FS|CLONE_FILES);
+		if (randomproc < 0) {
+			ret = randomproc;
+			printk("crypto: crypto_rregister cannot start random thread; "
+					"error %d", ret);
+		} else
+			started = 1;
+	}
+	spin_unlock_irqrestore(&random_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(crypto_rregister);
+
+int
+crypto_runregister_all(u_int32_t driverid)
+{
+	struct random_op *rops, *tmp;
+	unsigned long flags;
+
+	dprintk("%s,%d: %s(0x%x)\n", __FILE__, __LINE__, __FUNCTION__, driverid);
+
+	list_for_each_entry_safe(rops, tmp, &random_ops, random_list) {
+		if (rops->driverid == driverid) {
+			list_del(&rops->random_list);
+			kfree(rops);
+		}
+	}
+
+	spin_lock_irqsave(&random_lock, flags);
+	if (list_empty(&random_ops) && started)
+		kill_proc(randomproc, SIGKILL, 1);
+	spin_unlock_irqrestore(&random_lock, flags);
+	return(0);
+}
+EXPORT_SYMBOL(crypto_runregister_all);
+
+/*
+ * while we can add entropy to random.c continue to read random data from
+ * the drivers and push it to random.
+ */
+static int
+random_proc(void *arg)
+{
+	int n;
+	int wantcnt;
+	int bufcnt = 0;
+	int retval = 0;
+	int *buf = NULL;
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
+	daemonize();
+	spin_lock_irq(&current->sigmask_lock);
+	sigemptyset(&current->blocked);
+	recalc_sigpending(current);
+	spin_unlock_irq(&current->sigmask_lock);
+	sprintf(current->comm, "ocf-random");
+#else
+	daemonize("ocf-random");
+	allow_signal(SIGKILL);
+#endif
+
+	(void) get_fs();
+	set_fs(get_ds());
+
+#ifdef CONFIG_OCF_FIPS
+#define NUM_INT (RNDTEST_NBYTES/sizeof(int))
+#else
+#define NUM_INT 32
+#endif
+
+	/*
+	 * some devices can transferr their RNG data direct into memory,
+	 * so make sure it is device friendly
+	 */
+	buf = kmalloc(NUM_INT * sizeof(int), GFP_DMA);
+	if (NULL == buf) {
+		printk("crypto: RNG could not allocate memory\n");
+		retval = -ENOMEM;
+		goto bad_alloc;
+	}
+
+	wantcnt = NUM_INT;   /* start by adding some entropy */
+
+	/*
+	 * its possible due to errors or driver removal that we no longer
+	 * have anything to do,  if so exit or we will consume all the CPU
+	 * doing nothing
+	 */
+	while (!list_empty(&random_ops)) {
+		struct random_op	*rops, *tmp;
+
+#ifdef CONFIG_OCF_FIPS
+		if (wantcnt)
+			wantcnt = NUM_INT; /* FIPs mode can do 20000 bits or none */
+#endif
+
+		/* see if we can get enough entropy to make the world
+		 * a better place.
+		 */
+		while (bufcnt < wantcnt && bufcnt < NUM_INT) {
+			list_for_each_entry_safe(rops, tmp, &random_ops, random_list) {
+
+				n = (*rops->read_random)(rops->arg, &buf[bufcnt],
+							 NUM_INT - bufcnt);
+
+				/* on failure remove the random number generator */
+				if (n == -1) {
+					list_del(&rops->random_list);
+					printk("crypto: RNG (driverid=0x%x) failed, disabling\n",
+							rops->driverid);
+					kfree(rops);
+				} else if (n > 0)
+					bufcnt += n;
+			}
+			/* give up CPU for a bit, just in case as this is a loop */
+			schedule();
+		}
+
+
+#ifdef CONFIG_OCF_FIPS
+		if (bufcnt > 0 && rndtest_buf((unsigned char *) &buf[0])) {
+			dprintk("crypto: buffer had fips errors, discarding\n");
+			bufcnt = 0;
+		}
+#endif
+
+		/*
+		 * if we have a certified buffer,  we can send some data
+		 * to /dev/random and move along
+		 */
+		if (bufcnt > 0) {
+			/* add what we have */
+			random_input_words(buf, bufcnt, bufcnt*sizeof(int)*8);
+			bufcnt = 0;
+		}
+
+		/* give up CPU for a bit so we don't hog while filling */
+		schedule();
+
+		/* wait for needing more */
+		wantcnt = random_input_wait();
+
+		if (wantcnt <= 0)
+			wantcnt = 0; /* try to get some info again */
+		else
+		 	/* round up to one word or we can loop forever */
+			wantcnt = (wantcnt + (sizeof(int)*8)) / (sizeof(int)*8);
+		if (wantcnt > NUM_INT) {
+			wantcnt = NUM_INT;
+		}
+
+		if (signal_pending(current)) {
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
+			spin_lock_irq(&current->sigmask_lock);
+#endif
+			flush_signals(current);
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
+			spin_unlock_irq(&current->sigmask_lock);
+#endif
+		}
+	}
+	
+	kfree(buf);
+
+bad_alloc:
+	spin_lock_irq(&random_lock);
+	randomproc = (pid_t) -1;
+	started = 0;
+	spin_unlock_irq(&random_lock);
+
+	return retval;
+}
+
diff --git a/target/linux/generic/files/crypto/ocf/rndtest.c b/target/linux/generic/files/crypto/ocf/rndtest.c
new file mode 100644
index 0000000000..b31e1a666d
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/rndtest.c
@@ -0,0 +1,300 @@
+/*	$OpenBSD$	*/
+
+/*
+ * OCF/Linux port done by David McCullough <david_mccullough@mcafee.com>
+ * Copyright (C) 2006-2010 David McCullough
+ * Copyright (C) 2004-2005 Intel Corporation.
+ * The license and original author are listed below.
+ *
+ * Copyright (c) 2002 Jason L. Wright (jason@thought.net)
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *	This product includes software developed by Jason L. Wright
+ * 4. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef AUTOCONF_INCLUDED
+#include <linux/config.h>
+#endif
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/wait.h>
+#include <linux/time.h>
+#include <linux/version.h>
+#include <linux/unistd.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/time.h>
+#include <cryptodev.h>
+#include "rndtest.h"
+
+static struct rndtest_stats rndstats;
+
+static	void rndtest_test(struct rndtest_state *);
+
+/* The tests themselves */
+static	int rndtest_monobit(struct rndtest_state *);
+static	int rndtest_runs(struct rndtest_state *);
+static	int rndtest_longruns(struct rndtest_state *);
+static	int rndtest_chi_4(struct rndtest_state *);
+
+static	int rndtest_runs_check(struct rndtest_state *, int, int *);
+static	void rndtest_runs_record(struct rndtest_state *, int, int *);
+
+static const struct rndtest_testfunc {
+	int (*test)(struct rndtest_state *);
+} rndtest_funcs[] = {
+	{ rndtest_monobit },
+	{ rndtest_runs },
+	{ rndtest_chi_4 },
+	{ rndtest_longruns },
+};
+
+#define	RNDTEST_NTESTS	(sizeof(rndtest_funcs)/sizeof(rndtest_funcs[0]))
+
+static void
+rndtest_test(struct rndtest_state *rsp)
+{
+	int i, rv = 0;
+
+	rndstats.rst_tests++;
+	for (i = 0; i < RNDTEST_NTESTS; i++)
+		rv |= (*rndtest_funcs[i].test)(rsp);
+	rsp->rs_discard = (rv != 0);
+}
+
+
+extern int crypto_debug;
+#define rndtest_verbose 2
+#define rndtest_report(rsp, failure, fmt, a...) \
+	{ if (failure || crypto_debug) { printk("rng_test: " fmt "\n", a); } else; }
+
+#define	RNDTEST_MONOBIT_MINONES	9725
+#define	RNDTEST_MONOBIT_MAXONES	10275
+
+static int
+rndtest_monobit(struct rndtest_state *rsp)
+{
+	int i, ones = 0, j;
+	u_int8_t r;
+
+	for (i = 0; i < RNDTEST_NBYTES; i++) {
+		r = rsp->rs_buf[i];
+		for (j = 0; j < 8; j++, r <<= 1)
+			if (r & 0x80)
+				ones++;
+	}
+	if (ones > RNDTEST_MONOBIT_MINONES &&
+	    ones < RNDTEST_MONOBIT_MAXONES) {
+		if (rndtest_verbose > 1)
+			rndtest_report(rsp, 0, "monobit pass (%d < %d < %d)",
+			    RNDTEST_MONOBIT_MINONES, ones,
+			    RNDTEST_MONOBIT_MAXONES);
+		return (0);
+	} else {
+		if (rndtest_verbose)
+			rndtest_report(rsp, 1,
+			    "monobit failed (%d ones)", ones);
+		rndstats.rst_monobit++;
+		return (-1);
+	}
+}
+
+#define	RNDTEST_RUNS_NINTERVAL	6
+
+static const struct rndtest_runs_tabs {
+	u_int16_t min, max;
+} rndtest_runs_tab[] = {
+	{ 2343, 2657 },
+	{ 1135, 1365 },
+	{ 542, 708 },
+	{ 251, 373 },
+	{ 111, 201 },
+	{ 111, 201 },
+};
+
+static int
+rndtest_runs(struct rndtest_state *rsp)
+{
+	int i, j, ones, zeros, rv = 0;
+	int onei[RNDTEST_RUNS_NINTERVAL], zeroi[RNDTEST_RUNS_NINTERVAL];
+	u_int8_t c;
+
+	bzero(onei, sizeof(onei));
+	bzero(zeroi, sizeof(zeroi));
+	ones = zeros = 0;
+	for (i = 0; i < RNDTEST_NBYTES; i++) {
+		c = rsp->rs_buf[i];
+		for (j = 0; j < 8; j++, c <<= 1) {
+			if (c & 0x80) {
+				ones++;
+				rndtest_runs_record(rsp, zeros, zeroi);
+				zeros = 0;
+			} else {
+				zeros++;
+				rndtest_runs_record(rsp, ones, onei);
+				ones = 0;
+			}
+		}
+	}
+	rndtest_runs_record(rsp, ones, onei);
+	rndtest_runs_record(rsp, zeros, zeroi);
+
+	rv |= rndtest_runs_check(rsp, 0, zeroi);
+	rv |= rndtest_runs_check(rsp, 1, onei);
+
+	if (rv)
+		rndstats.rst_runs++;
+
+	return (rv);
+}
+
+static void
+rndtest_runs_record(struct rndtest_state *rsp, int len, int *intrv)
+{
+	if (len == 0)
+		return;
+	if (len > RNDTEST_RUNS_NINTERVAL)
+		len = RNDTEST_RUNS_NINTERVAL;
+	len -= 1;
+	intrv[len]++;
+}
+
+static int
+rndtest_runs_check(struct rndtest_state *rsp, int val, int *src)
+{
+	int i, rv = 0;
+
+	for (i = 0; i < RNDTEST_RUNS_NINTERVAL; i++) {
+		if (src[i] < rndtest_runs_tab[i].min ||
+		    src[i] > rndtest_runs_tab[i].max) {
+			rndtest_report(rsp, 1,
+			    "%s interval %d failed (%d, %d-%d)",
+			    val ? "ones" : "zeros",
+			    i + 1, src[i], rndtest_runs_tab[i].min,
+			    rndtest_runs_tab[i].max);
+			rv = -1;
+		} else {
+			rndtest_report(rsp, 0,
+			    "runs pass %s interval %d (%d < %d < %d)",
+			    val ? "ones" : "zeros",
+			    i + 1, rndtest_runs_tab[i].min, src[i],
+			    rndtest_runs_tab[i].max);
+		}
+	}
+	return (rv);
+}
+
+static int
+rndtest_longruns(struct rndtest_state *rsp)
+{
+	int i, j, ones = 0, zeros = 0, maxones = 0, maxzeros = 0;
+	u_int8_t c;
+
+	for (i = 0; i < RNDTEST_NBYTES; i++) {
+		c = rsp->rs_buf[i];
+		for (j = 0; j < 8; j++, c <<= 1) {
+			if (c & 0x80) {
+				zeros = 0;
+				ones++;
+				if (ones > maxones)
+					maxones = ones;
+			} else {
+				ones = 0;
+				zeros++;
+				if (zeros > maxzeros)
+					maxzeros = zeros;
+			}
+		}
+	}
+
+	if (maxones < 26 && maxzeros < 26) {
+		rndtest_report(rsp, 0, "longruns pass (%d ones, %d zeros)",
+			maxones, maxzeros);
+		return (0);
+	} else {
+		rndtest_report(rsp, 1, "longruns fail (%d ones, %d zeros)",
+			maxones, maxzeros);
+		rndstats.rst_longruns++;
+		return (-1);
+	}
+}
+
+/*
+ * chi^2 test over 4 bits: (this is called the poker test in FIPS 140-2,
+ * but it is really the chi^2 test over 4 bits (the poker test as described
+ * by Knuth vol 2 is something different, and I take him as authoritative
+ * on nomenclature over NIST).
+ */
+#define	RNDTEST_CHI4_K	16
+#define	RNDTEST_CHI4_K_MASK	(RNDTEST_CHI4_K - 1)
+
+/*
+ * The unnormalized values are used so that we don't have to worry about
+ * fractional precision.  The "real" value is found by:
+ *	(V - 1562500) * (16 / 5000) = Vn   (where V is the unnormalized value)
+ */
+#define	RNDTEST_CHI4_VMIN	1563181		/* 2.1792 */
+#define	RNDTEST_CHI4_VMAX	1576929		/* 46.1728 */
+
+static int
+rndtest_chi_4(struct rndtest_state *rsp)
+{
+	unsigned int freq[RNDTEST_CHI4_K], i, sum;
+
+	for (i = 0; i < RNDTEST_CHI4_K; i++)
+		freq[i] = 0;
+
+	/* Get number of occurances of each 4 bit pattern */
+	for (i = 0; i < RNDTEST_NBYTES; i++) {
+		freq[(rsp->rs_buf[i] >> 4) & RNDTEST_CHI4_K_MASK]++;
+		freq[(rsp->rs_buf[i] >> 0) & RNDTEST_CHI4_K_MASK]++;
+	}
+
+	for (i = 0, sum = 0; i < RNDTEST_CHI4_K; i++)
+		sum += freq[i] * freq[i];
+
+	if (sum >= 1563181 && sum <= 1576929) {
+		rndtest_report(rsp, 0, "chi^2(4): pass (sum %u)", sum);
+		return (0);
+	} else {
+		rndtest_report(rsp, 1, "chi^2(4): failed (sum %u)", sum);
+		rndstats.rst_chi++;
+		return (-1);
+	}
+}
+
+int
+rndtest_buf(unsigned char *buf)
+{
+	struct rndtest_state rsp;
+
+	memset(&rsp, 0, sizeof(rsp));
+	rsp.rs_buf = buf;
+	rndtest_test(&rsp);
+	return(rsp.rs_discard);
+}
+
diff --git a/target/linux/generic/files/crypto/ocf/rndtest.h b/target/linux/generic/files/crypto/ocf/rndtest.h
new file mode 100644
index 0000000000..e9d8ec8d39
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/rndtest.h
@@ -0,0 +1,54 @@
+/*	$FreeBSD: src/sys/dev/rndtest/rndtest.h,v 1.1 2003/03/11 22:54:44 sam Exp $	*/
+/*	$OpenBSD$	*/
+
+/*
+ * Copyright (c) 2002 Jason L. Wright (jason@thought.net)
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *	This product includes software developed by Jason L. Wright
+ * 4. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+/* Some of the tests depend on these values */
+#define	RNDTEST_NBYTES	2500
+#define	RNDTEST_NBITS	(8 * RNDTEST_NBYTES)
+
+struct rndtest_state {
+	int		rs_discard;	/* discard/accept random data */
+	u_int8_t	*rs_buf;
+};
+
+struct rndtest_stats {
+	u_int32_t	rst_discard;	/* number of bytes discarded */
+	u_int32_t	rst_tests;	/* number of test runs */
+	u_int32_t	rst_monobit;	/* monobit test failures */
+	u_int32_t	rst_runs;	/* 0/1 runs failures */
+	u_int32_t	rst_longruns;	/* longruns failures */
+	u_int32_t	rst_chi;	/* chi^2 failures */
+};
+
+extern int rndtest_buf(unsigned char *buf);
diff --git a/target/linux/generic/files/crypto/ocf/safe/Makefile b/target/linux/generic/files/crypto/ocf/safe/Makefile
new file mode 100644
index 0000000000..9a36b081e5
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/safe/Makefile
@@ -0,0 +1,12 @@
+# for SGlinux builds
+-include $(ROOTDIR)/modules/.config
+
+obj-$(CONFIG_OCF_SAFE) += safe.o
+
+obj ?= .
+EXTRA_CFLAGS += -I$(obj)/.. -I$(obj)/
+
+ifdef TOPDIR
+-include $(TOPDIR)/Rules.make
+endif
+
diff --git a/target/linux/generic/files/crypto/ocf/safe/md5.c b/target/linux/generic/files/crypto/ocf/safe/md5.c
new file mode 100644
index 0000000000..077c42e787
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/safe/md5.c
@@ -0,0 +1,308 @@
+/*	$KAME: md5.c,v 1.5 2000/11/08 06:13:08 itojun Exp $	*/
+/*
+ * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the project nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#if 0
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD: src/sys/crypto/md5.c,v 1.9 2004/01/27 19:49:19 des Exp $");
+
+#include <sys/types.h>
+#include <sys/cdefs.h>
+#include <sys/time.h>
+#include <sys/systm.h>
+#include <crypto/md5.h>
+#endif
+
+#define SHIFT(X, s) (((X) << (s)) | ((X) >> (32 - (s))))
+
+#define F(X, Y, Z) (((X) & (Y)) | ((~X) & (Z)))
+#define G(X, Y, Z) (((X) & (Z)) | ((Y) & (~Z)))
+#define H(X, Y, Z) ((X) ^ (Y) ^ (Z))
+#define I(X, Y, Z) ((Y) ^ ((X) | (~Z)))
+
+#define ROUND1(a, b, c, d, k, s, i) { \
+	(a) = (a) + F((b), (c), (d)) + X[(k)] + T[(i)]; \
+	(a) = SHIFT((a), (s)); \
+	(a) = (b) + (a); \
+}
+
+#define ROUND2(a, b, c, d, k, s, i) { \
+	(a) = (a) + G((b), (c), (d)) + X[(k)] + T[(i)]; \
+	(a) = SHIFT((a), (s)); \
+	(a) = (b) + (a); \
+}
+
+#define ROUND3(a, b, c, d, k, s, i) { \
+	(a) = (a) + H((b), (c), (d)) + X[(k)] + T[(i)]; \
+	(a) = SHIFT((a), (s)); \
+	(a) = (b) + (a); \
+}
+
+#define ROUND4(a, b, c, d, k, s, i) { \
+	(a) = (a) + I((b), (c), (d)) + X[(k)] + T[(i)]; \
+	(a) = SHIFT((a), (s)); \
+	(a) = (b) + (a); \
+}
+
+#define Sa	 7
+#define Sb	12
+#define Sc	17
+#define Sd	22
+
+#define Se	 5
+#define Sf	 9
+#define Sg	14
+#define Sh	20
+
+#define Si	 4
+#define Sj	11
+#define Sk	16
+#define Sl	23
+
+#define Sm	 6
+#define Sn	10
+#define So	15
+#define Sp	21
+
+#define MD5_A0	0x67452301
+#define MD5_B0	0xefcdab89
+#define MD5_C0	0x98badcfe
+#define MD5_D0	0x10325476
+
+/* Integer part of 4294967296 times abs(sin(i)), where i is in radians. */
+static const u_int32_t T[65] = {
+	0,
+	0xd76aa478, 	0xe8c7b756,	0x242070db,	0xc1bdceee,
+	0xf57c0faf,	0x4787c62a, 	0xa8304613,	0xfd469501,
+	0x698098d8,	0x8b44f7af,	0xffff5bb1,	0x895cd7be,
+	0x6b901122, 	0xfd987193, 	0xa679438e,	0x49b40821,
+
+	0xf61e2562,	0xc040b340, 	0x265e5a51, 	0xe9b6c7aa,
+	0xd62f105d,	0x2441453,	0xd8a1e681,	0xe7d3fbc8,
+	0x21e1cde6,	0xc33707d6, 	0xf4d50d87, 	0x455a14ed,
+	0xa9e3e905,	0xfcefa3f8, 	0x676f02d9, 	0x8d2a4c8a,
+
+	0xfffa3942,	0x8771f681, 	0x6d9d6122, 	0xfde5380c,
+	0xa4beea44, 	0x4bdecfa9, 	0xf6bb4b60, 	0xbebfbc70,
+	0x289b7ec6, 	0xeaa127fa, 	0xd4ef3085,	0x4881d05,
+	0xd9d4d039, 	0xe6db99e5, 	0x1fa27cf8, 	0xc4ac5665,
+
+	0xf4292244, 	0x432aff97, 	0xab9423a7, 	0xfc93a039,
+	0x655b59c3, 	0x8f0ccc92, 	0xffeff47d, 	0x85845dd1,
+	0x6fa87e4f, 	0xfe2ce6e0, 	0xa3014314, 	0x4e0811a1,
+	0xf7537e82, 	0xbd3af235, 	0x2ad7d2bb, 	0xeb86d391,
+};
+
+static const u_int8_t md5_paddat[MD5_BUFLEN] = {
+	0x80,	0,	0,	0,	0,	0,	0,	0,
+	0,	0,	0,	0,	0,	0,	0,	0,
+	0,	0,	0,	0,	0,	0,	0,	0,
+	0,	0,	0,	0,	0,	0,	0,	0,
+	0,	0,	0,	0,	0,	0,	0,	0,
+	0,	0,	0,	0,	0,	0,	0,	0,
+	0,	0,	0,	0,	0,	0,	0,	0,
+	0,	0,	0,	0,	0,	0,	0,	0,	
+};
+
+static void md5_calc(u_int8_t *, md5_ctxt *);
+
+void md5_init(ctxt)
+	md5_ctxt *ctxt;
+{
+	ctxt->md5_n = 0;
+	ctxt->md5_i = 0;
+	ctxt->md5_sta = MD5_A0;
+	ctxt->md5_stb = MD5_B0;
+	ctxt->md5_stc = MD5_C0;
+	ctxt->md5_std = MD5_D0;
+	bzero(ctxt->md5_buf, sizeof(ctxt->md5_buf));
+}
+
+void md5_loop(ctxt, input, len)
+	md5_ctxt *ctxt;
+	u_int8_t *input;
+	u_int len; /* number of bytes */
+{
+	u_int gap, i;
+
+	ctxt->md5_n += len * 8; /* byte to bit */
+	gap = MD5_BUFLEN - ctxt->md5_i;
+
+	if (len >= gap) {
+		bcopy((void *)input, (void *)(ctxt->md5_buf + ctxt->md5_i),
+			gap);
+		md5_calc(ctxt->md5_buf, ctxt);
+
+		for (i = gap; i + MD5_BUFLEN <= len; i += MD5_BUFLEN) {
+			md5_calc((u_int8_t *)(input + i), ctxt);
+		}
+		
+		ctxt->md5_i = len - i;
+		bcopy((void *)(input + i), (void *)ctxt->md5_buf, ctxt->md5_i);
+	} else {
+		bcopy((void *)input, (void *)(ctxt->md5_buf + ctxt->md5_i),
+			len);
+		ctxt->md5_i += len;
+	}
+}
+
+void md5_pad(ctxt)
+	md5_ctxt *ctxt;
+{
+	u_int gap;
+
+	/* Don't count up padding. Keep md5_n. */	
+	gap = MD5_BUFLEN - ctxt->md5_i;
+	if (gap > 8) {
+		bcopy(md5_paddat,
+		      (void *)(ctxt->md5_buf + ctxt->md5_i),
+		      gap - sizeof(ctxt->md5_n));
+	} else {
+		/* including gap == 8 */
+		bcopy(md5_paddat, (void *)(ctxt->md5_buf + ctxt->md5_i),
+			gap);
+		md5_calc(ctxt->md5_buf, ctxt);
+		bcopy((md5_paddat + gap),
+		      (void *)ctxt->md5_buf,
+		      MD5_BUFLEN - sizeof(ctxt->md5_n));
+	}
+
+	/* 8 byte word */	
+#if BYTE_ORDER == LITTLE_ENDIAN
+	bcopy(&ctxt->md5_n8[0], &ctxt->md5_buf[56], 8);
+#endif
+#if BYTE_ORDER == BIG_ENDIAN
+	ctxt->md5_buf[56] = ctxt->md5_n8[7];
+	ctxt->md5_buf[57] = ctxt->md5_n8[6];
+	ctxt->md5_buf[58] = ctxt->md5_n8[5];
+	ctxt->md5_buf[59] = ctxt->md5_n8[4];
+	ctxt->md5_buf[60] = ctxt->md5_n8[3];
+	ctxt->md5_buf[61] = ctxt->md5_n8[2];
+	ctxt->md5_buf[62] = ctxt->md5_n8[1];
+	ctxt->md5_buf[63] = ctxt->md5_n8[0];
+#endif
+
+	md5_calc(ctxt->md5_buf, ctxt);
+}
+
+void md5_result(digest, ctxt)
+	u_int8_t *digest;
+	md5_ctxt *ctxt;
+{
+	/* 4 byte words */
+#if BYTE_ORDER == LITTLE_ENDIAN
+	bcopy(&ctxt->md5_st8[0], digest, 16);
+#endif
+#if BYTE_ORDER == BIG_ENDIAN
+	digest[ 0] = ctxt->md5_st8[ 3]; digest[ 1] = ctxt->md5_st8[ 2];
+	digest[ 2] = ctxt->md5_st8[ 1]; digest[ 3] = ctxt->md5_st8[ 0];
+	digest[ 4] = ctxt->md5_st8[ 7]; digest[ 5] = ctxt->md5_st8[ 6];
+	digest[ 6] = ctxt->md5_st8[ 5]; digest[ 7] = ctxt->md5_st8[ 4];
+	digest[ 8] = ctxt->md5_st8[11]; digest[ 9] = ctxt->md5_st8[10];
+	digest[10] = ctxt->md5_st8[ 9]; digest[11] = ctxt->md5_st8[ 8];
+	digest[12] = ctxt->md5_st8[15]; digest[13] = ctxt->md5_st8[14];
+	digest[14] = ctxt->md5_st8[13]; digest[15] = ctxt->md5_st8[12];
+#endif
+}
+
+static void md5_calc(b64, ctxt)
+	u_int8_t *b64;
+	md5_ctxt *ctxt;
+{
+	u_int32_t A = ctxt->md5_sta;
+	u_int32_t B = ctxt->md5_stb;
+	u_int32_t C = ctxt->md5_stc;
+	u_int32_t D = ctxt->md5_std;
+#if BYTE_ORDER == LITTLE_ENDIAN
+	u_int32_t *X = (u_int32_t *)b64;
+#endif	
+#if BYTE_ORDER == BIG_ENDIAN
+	/* 4 byte words */
+	/* what a brute force but fast! */
+	u_int32_t X[16];
+	u_int8_t *y = (u_int8_t *)X;
+	y[ 0] = b64[ 3]; y[ 1] = b64[ 2]; y[ 2] = b64[ 1]; y[ 3] = b64[ 0];
+	y[ 4] = b64[ 7]; y[ 5] = b64[ 6]; y[ 6] = b64[ 5]; y[ 7] = b64[ 4];
+	y[ 8] = b64[11]; y[ 9] = b64[10]; y[10] = b64[ 9]; y[11] = b64[ 8];
+	y[12] = b64[15]; y[13] = b64[14]; y[14] = b64[13]; y[15] = b64[12];
+	y[16] = b64[19]; y[17] = b64[18]; y[18] = b64[17]; y[19] = b64[16];
+	y[20] = b64[23]; y[21] = b64[22]; y[22] = b64[21]; y[23] = b64[20];
+	y[24] = b64[27]; y[25] = b64[26]; y[26] = b64[25]; y[27] = b64[24];
+	y[28] = b64[31]; y[29] = b64[30]; y[30] = b64[29]; y[31] = b64[28];
+	y[32] = b64[35]; y[33] = b64[34]; y[34] = b64[33]; y[35] = b64[32];
+	y[36] = b64[39]; y[37] = b64[38]; y[38] = b64[37]; y[39] = b64[36];
+	y[40] = b64[43]; y[41] = b64[42]; y[42] = b64[41]; y[43] = b64[40];
+	y[44] = b64[47]; y[45] = b64[46]; y[46] = b64[45]; y[47] = b64[44];
+	y[48] = b64[51]; y[49] = b64[50]; y[50] = b64[49]; y[51] = b64[48];
+	y[52] = b64[55]; y[53] = b64[54]; y[54] = b64[53]; y[55] = b64[52];
+	y[56] = b64[59]; y[57] = b64[58]; y[58] = b64[57]; y[59] = b64[56];
+	y[60] = b64[63]; y[61] = b64[62]; y[62] = b64[61]; y[63] = b64[60];
+#endif
+
+	ROUND1(A, B, C, D,  0, Sa,  1); ROUND1(D, A, B, C,  1, Sb,  2);
+	ROUND1(C, D, A, B,  2, Sc,  3); ROUND1(B, C, D, A,  3, Sd,  4);
+	ROUND1(A, B, C, D,  4, Sa,  5); ROUND1(D, A, B, C,  5, Sb,  6);
+	ROUND1(C, D, A, B,  6, Sc,  7); ROUND1(B, C, D, A,  7, Sd,  8);
+	ROUND1(A, B, C, D,  8, Sa,  9); ROUND1(D, A, B, C,  9, Sb, 10);
+	ROUND1(C, D, A, B, 10, Sc, 11); ROUND1(B, C, D, A, 11, Sd, 12);
+	ROUND1(A, B, C, D, 12, Sa, 13); ROUND1(D, A, B, C, 13, Sb, 14);
+	ROUND1(C, D, A, B, 14, Sc, 15); ROUND1(B, C, D, A, 15, Sd, 16);
+	
+	ROUND2(A, B, C, D,  1, Se, 17); ROUND2(D, A, B, C,  6, Sf, 18);
+	ROUND2(C, D, A, B, 11, Sg, 19); ROUND2(B, C, D, A,  0, Sh, 20);
+	ROUND2(A, B, C, D,  5, Se, 21); ROUND2(D, A, B, C, 10, Sf, 22);
+	ROUND2(C, D, A, B, 15, Sg, 23); ROUND2(B, C, D, A,  4, Sh, 24);
+	ROUND2(A, B, C, D,  9, Se, 25); ROUND2(D, A, B, C, 14, Sf, 26);
+	ROUND2(C, D, A, B,  3, Sg, 27); ROUND2(B, C, D, A,  8, Sh, 28);
+	ROUND2(A, B, C, D, 13, Se, 29); ROUND2(D, A, B, C,  2, Sf, 30);
+	ROUND2(C, D, A, B,  7, Sg, 31); ROUND2(B, C, D, A, 12, Sh, 32);
+
+	ROUND3(A, B, C, D,  5, Si, 33); ROUND3(D, A, B, C,  8, Sj, 34);
+	ROUND3(C, D, A, B, 11, Sk, 35); ROUND3(B, C, D, A, 14, Sl, 36);
+	ROUND3(A, B, C, D,  1, Si, 37); ROUND3(D, A, B, C,  4, Sj, 38);
+	ROUND3(C, D, A, B,  7, Sk, 39); ROUND3(B, C, D, A, 10, Sl, 40);
+	ROUND3(A, B, C, D, 13, Si, 41); ROUND3(D, A, B, C,  0, Sj, 42);
+	ROUND3(C, D, A, B,  3, Sk, 43); ROUND3(B, C, D, A,  6, Sl, 44);
+	ROUND3(A, B, C, D,  9, Si, 45); ROUND3(D, A, B, C, 12, Sj, 46);
+	ROUND3(C, D, A, B, 15, Sk, 47); ROUND3(B, C, D, A,  2, Sl, 48);
+	
+	ROUND4(A, B, C, D,  0, Sm, 49); ROUND4(D, A, B, C,  7, Sn, 50);	
+	ROUND4(C, D, A, B, 14, So, 51); ROUND4(B, C, D, A,  5, Sp, 52);	
+	ROUND4(A, B, C, D, 12, Sm, 53); ROUND4(D, A, B, C,  3, Sn, 54);	
+	ROUND4(C, D, A, B, 10, So, 55); ROUND4(B, C, D, A,  1, Sp, 56);	
+	ROUND4(A, B, C, D,  8, Sm, 57); ROUND4(D, A, B, C, 15, Sn, 58);	
+	ROUND4(C, D, A, B,  6, So, 59); ROUND4(B, C, D, A, 13, Sp, 60);	
+	ROUND4(A, B, C, D,  4, Sm, 61); ROUND4(D, A, B, C, 11, Sn, 62);	
+	ROUND4(C, D, A, B,  2, So, 63); ROUND4(B, C, D, A,  9, Sp, 64);
+
+	ctxt->md5_sta += A;
+	ctxt->md5_stb += B;
+	ctxt->md5_stc += C;
+	ctxt->md5_std += D;
+}
diff --git a/target/linux/generic/files/crypto/ocf/safe/md5.h b/target/linux/generic/files/crypto/ocf/safe/md5.h
new file mode 100644
index 0000000000..690f5bfc11
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/safe/md5.h
@@ -0,0 +1,76 @@
+/*	$FreeBSD: src/sys/crypto/md5.h,v 1.4 2002/03/20 05:13:50 alfred Exp $	*/
+/*	$KAME: md5.h,v 1.4 2000/03/27 04:36:22 sumikawa Exp $	*/
+
+/*
+ * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the project nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef _NETINET6_MD5_H_
+#define _NETINET6_MD5_H_
+
+#define MD5_BUFLEN	64
+
+typedef struct {
+	union {
+		u_int32_t	md5_state32[4];
+		u_int8_t	md5_state8[16];
+	} md5_st;
+
+#define md5_sta		md5_st.md5_state32[0]
+#define md5_stb		md5_st.md5_state32[1]
+#define md5_stc		md5_st.md5_state32[2]
+#define md5_std		md5_st.md5_state32[3]
+#define md5_st8		md5_st.md5_state8
+
+	union {
+		u_int64_t	md5_count64;
+		u_int8_t	md5_count8[8];
+	} md5_count;
+#define md5_n	md5_count.md5_count64
+#define md5_n8	md5_count.md5_count8
+
+	u_int	md5_i;
+	u_int8_t	md5_buf[MD5_BUFLEN];
+} md5_ctxt;
+
+extern void md5_init(md5_ctxt *);
+extern void md5_loop(md5_ctxt *, u_int8_t *, u_int);
+extern void md5_pad(md5_ctxt *);
+extern void md5_result(u_int8_t *, md5_ctxt *);
+
+/* compatibility */
+#define MD5_CTX		md5_ctxt
+#define MD5Init(x)	md5_init((x))
+#define MD5Update(x, y, z)	md5_loop((x), (y), (z))
+#define MD5Final(x, y) \
+do {				\
+	md5_pad((y));		\
+	md5_result((x), (y));	\
+} while (0)
+
+#endif /* ! _NETINET6_MD5_H_*/
diff --git a/target/linux/generic/files/crypto/ocf/safe/safe.c b/target/linux/generic/files/crypto/ocf/safe/safe.c
new file mode 100644
index 0000000000..7e65101769
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/safe/safe.c
@@ -0,0 +1,2288 @@
+/*-
+ * Linux port done by David McCullough <david_mccullough@mcafee.com>
+ * Copyright (C) 2004-2010 David McCullough
+ * The license and original author are listed below.
+ *
+ * Copyright (c) 2003 Sam Leffler, Errno Consulting
+ * Copyright (c) 2003 Global Technology Associates, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+__FBSDID("$FreeBSD: src/sys/dev/safe/safe.c,v 1.18 2007/03/21 03:42:50 sam Exp $");
+ */
+
+#ifndef AUTOCONF_INCLUDED
+#include <linux/config.h>
+#endif
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/wait.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/random.h>
+#include <linux/version.h>
+#include <linux/skbuff.h>
+#include <asm/io.h>
+
+/*
+ * SafeNet SafeXcel-1141 hardware crypto accelerator
+ */
+
+#include <cryptodev.h>
+#include <uio.h>
+#include <safe/safereg.h>
+#include <safe/safevar.h>
+
+#if 1
+#define	DPRINTF(a)	do { \
+						if (debug) { \
+							printk("%s: ", sc ? \
+								device_get_nameunit(sc->sc_dev) : "safe"); \
+							printk a; \
+						} \
+					} while (0)
+#else
+#define	DPRINTF(a)
+#endif
+
+/*
+ * until we find a cleaner way, include the BSD md5/sha1 code
+ * here
+ */
+#define HMAC_HACK 1
+#ifdef HMAC_HACK
+#define LITTLE_ENDIAN 1234
+#define BIG_ENDIAN 4321
+#ifdef __LITTLE_ENDIAN
+#define BYTE_ORDER LITTLE_ENDIAN
+#endif
+#ifdef __BIG_ENDIAN
+#define BYTE_ORDER BIG_ENDIAN
+#endif
+#include <safe/md5.h>
+#include <safe/md5.c>
+#include <safe/sha1.h>
+#include <safe/sha1.c>
+
+u_int8_t hmac_ipad_buffer[64] = {
+    0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+    0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+    0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+    0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+    0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+    0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+    0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+    0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36
+};
+
+u_int8_t hmac_opad_buffer[64] = {
+    0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C,
+    0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C,
+    0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C,
+    0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C,
+    0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C,
+    0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C,
+    0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C,
+    0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C
+};
+#endif /* HMAC_HACK */
+
+/* add proc entry for this */
+struct safe_stats safestats;
+
+#define debug safe_debug
+int safe_debug = 0;
+module_param(safe_debug, int, 0644);
+MODULE_PARM_DESC(safe_debug, "Enable debug");
+
+static	void safe_callback(struct safe_softc *, struct safe_ringentry *);
+static	void safe_feed(struct safe_softc *, struct safe_ringentry *);
+#if defined(CONFIG_OCF_RANDOMHARVEST) && !defined(SAFE_NO_RNG)
+static	void safe_rng_init(struct safe_softc *);
+int safe_rngbufsize = 8;		/* 32 bytes each read  */
+module_param(safe_rngbufsize, int, 0644);
+MODULE_PARM_DESC(safe_rngbufsize, "RNG polling buffer size (32-bit words)");
+int safe_rngmaxalarm = 8;		/* max alarms before reset */
+module_param(safe_rngmaxalarm, int, 0644);
+MODULE_PARM_DESC(safe_rngmaxalarm, "RNG max alarms before reset");
+#endif /* SAFE_NO_RNG */
+
+static void safe_totalreset(struct safe_softc *sc);
+static int safe_dmamap_aligned(struct safe_softc *sc, const struct safe_operand *op);
+static int safe_dmamap_uniform(struct safe_softc *sc, const struct safe_operand *op);
+static int safe_free_entry(struct safe_softc *sc, struct safe_ringentry *re);
+static int safe_kprocess(device_t dev, struct cryptkop *krp, int hint);
+static int safe_kstart(struct safe_softc *sc);
+static int safe_ksigbits(struct safe_softc *sc, struct crparam *cr);
+static void safe_kfeed(struct safe_softc *sc);
+static void safe_kpoll(unsigned long arg);
+static void safe_kload_reg(struct safe_softc *sc, u_int32_t off,
+								u_int32_t len, struct crparam *n);
+
+static	int safe_newsession(device_t, u_int32_t *, struct cryptoini *);
+static	int safe_freesession(device_t, u_int64_t);
+static	int safe_process(device_t, struct cryptop *, int);
+
+static device_method_t safe_methods = {
+	/* crypto device methods */
+	DEVMETHOD(cryptodev_newsession,	safe_newsession),
+	DEVMETHOD(cryptodev_freesession,safe_freesession),
+	DEVMETHOD(cryptodev_process,	safe_process),
+	DEVMETHOD(cryptodev_kprocess,	safe_kprocess),
+};
+
+#define	READ_REG(sc,r)			readl((sc)->sc_base_addr + (r))
+#define WRITE_REG(sc,r,val)		writel((val), (sc)->sc_base_addr + (r))
+
+#define SAFE_MAX_CHIPS 8
+static struct safe_softc *safe_chip_idx[SAFE_MAX_CHIPS];
+
+/*
+ * split our buffers up into safe DMAable byte fragments to avoid lockup
+ * bug in 1141 HW on rev 1.0.
+ */
+
+static int
+pci_map_linear(
+	struct safe_softc *sc,
+	struct safe_operand *buf,
+	void *addr,
+	int len)
+{
+	dma_addr_t tmp;
+	int chunk, tlen = len;
+
+	tmp = pci_map_single(sc->sc_pcidev, addr, len, PCI_DMA_BIDIRECTIONAL);
+
+	buf->mapsize += len;
+	while (len > 0) {
+		chunk = (len > sc->sc_max_dsize) ? sc->sc_max_dsize : len;
+		buf->segs[buf->nsegs].ds_addr = tmp;
+		buf->segs[buf->nsegs].ds_len  = chunk;
+		buf->segs[buf->nsegs].ds_tlen = tlen;
+		buf->nsegs++;
+		tmp  += chunk;
+		len  -= chunk;
+		tlen = 0;
+	}
+	return 0;
+}
+
+/*
+ * map in a given uio buffer (great on some arches :-)
+ */
+
+static int
+pci_map_uio(struct safe_softc *sc, struct safe_operand *buf, struct uio *uio)
+{
+	struct iovec *iov = uio->uio_iov;
+	int n;
+
+	DPRINTF(("%s()\n", __FUNCTION__));
+
+	buf->mapsize = 0;
+	buf->nsegs = 0;
+
+	for (n = 0; n < uio->uio_iovcnt; n++) {
+		pci_map_linear(sc, buf, iov->iov_base, iov->iov_len);
+		iov++;
+	}
+
+	/* identify this buffer by the first segment */
+	buf->map = (void *) buf->segs[0].ds_addr;
+	return(0);
+}
+
+/*
+ * map in a given sk_buff
+ */
+
+static int
+pci_map_skb(struct safe_softc *sc,struct safe_operand *buf,struct sk_buff *skb)
+{
+	int i;
+
+	DPRINTF(("%s()\n", __FUNCTION__));
+
+	buf->mapsize = 0;
+	buf->nsegs = 0;
+
+	pci_map_linear(sc, buf, skb->data, skb_headlen(skb));
+
+	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+		pci_map_linear(sc, buf,
+				page_address(skb_shinfo(skb)->frags[i].page) +
+				                        skb_shinfo(skb)->frags[i].page_offset,
+				skb_shinfo(skb)->frags[i].size);
+	}
+
+	/* identify this buffer by the first segment */
+	buf->map = (void *) buf->segs[0].ds_addr;
+	return(0);
+}
+
+
+#if 0 /* not needed at this time */
+static void
+pci_sync_operand(struct safe_softc *sc, struct safe_operand *buf)
+{
+	int i;
+
+	DPRINTF(("%s()\n", __FUNCTION__));
+	for (i = 0; i < buf->nsegs; i++)
+		pci_dma_sync_single_for_cpu(sc->sc_pcidev, buf->segs[i].ds_addr,
+				buf->segs[i].ds_len, PCI_DMA_BIDIRECTIONAL);
+}
+#endif
+
+static void
+pci_unmap_operand(struct safe_softc *sc, struct safe_operand *buf)
+{
+	int i;
+	DPRINTF(("%s()\n", __FUNCTION__));
+	for (i = 0; i < buf->nsegs; i++) {
+		if (buf->segs[i].ds_tlen) {
+			DPRINTF(("%s - unmap %d 0x%x %d\n", __FUNCTION__, i, buf->segs[i].ds_addr, buf->segs[i].ds_tlen));
+			pci_unmap_single(sc->sc_pcidev, buf->segs[i].ds_addr,
+					buf->segs[i].ds_tlen, PCI_DMA_BIDIRECTIONAL);
+			DPRINTF(("%s - unmap %d 0x%x %d done\n", __FUNCTION__, i, buf->segs[i].ds_addr, buf->segs[i].ds_tlen));
+		}
+		buf->segs[i].ds_addr = 0;
+		buf->segs[i].ds_len = 0;
+		buf->segs[i].ds_tlen = 0;
+	}
+	buf->nsegs = 0;
+	buf->mapsize = 0;
+	buf->map = 0;
+}
+
+
+/*
+ * SafeXcel Interrupt routine
+ */
+static irqreturn_t
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19)
+safe_intr(int irq, void *arg)
+#else
+safe_intr(int irq, void *arg, struct pt_regs *regs)
+#endif
+{
+	struct safe_softc *sc = arg;
+	int stat;
+	unsigned long flags;
+
+	stat = READ_REG(sc, SAFE_HM_STAT);
+
+	DPRINTF(("%s(stat=0x%x)\n", __FUNCTION__, stat));
+
+	if (stat == 0)		/* shared irq, not for us */
+		return IRQ_NONE;
+
+	WRITE_REG(sc, SAFE_HI_CLR, stat);	/* IACK */
+
+	if ((stat & SAFE_INT_PE_DDONE)) {
+		/*
+		 * Descriptor(s) done; scan the ring and
+		 * process completed operations.
+		 */
+		spin_lock_irqsave(&sc->sc_ringmtx, flags);
+		while (sc->sc_back != sc->sc_front) {
+			struct safe_ringentry *re = sc->sc_back;
+
+#ifdef SAFE_DEBUG
+			if (debug) {
+				safe_dump_ringstate(sc, __func__);
+				safe_dump_request(sc, __func__, re);
+			}
+#endif
+			/*
+			 * safe_process marks ring entries that were allocated
+			 * but not used with a csr of zero.  This insures the
+			 * ring front pointer never needs to be set backwards
+			 * in the event that an entry is allocated but not used
+			 * because of a setup error.
+			 */
+			DPRINTF(("%s re->re_desc.d_csr=0x%x\n", __FUNCTION__, re->re_desc.d_csr));
+			if (re->re_desc.d_csr != 0) {
+				if (!SAFE_PE_CSR_IS_DONE(re->re_desc.d_csr)) {
+					DPRINTF(("%s !CSR_IS_DONE\n", __FUNCTION__));
+					break;
+				}
+				if (!SAFE_PE_LEN_IS_DONE(re->re_desc.d_len)) {
+					DPRINTF(("%s !LEN_IS_DONE\n", __FUNCTION__));
+					break;
+				}
+				sc->sc_nqchip--;
+				safe_callback(sc, re);
+			}
+			if (++(sc->sc_back) == sc->sc_ringtop)
+				sc->sc_back = sc->sc_ring;
+		}
+		spin_unlock_irqrestore(&sc->sc_ringmtx, flags);
+	}
+
+	/*
+	 * Check to see if we got any DMA Error
+	 */
+	if (stat & SAFE_INT_PE_ERROR) {
+		printk("%s: dmaerr dmastat %08x\n", device_get_nameunit(sc->sc_dev),
+				(int)READ_REG(sc, SAFE_PE_DMASTAT));
+		safestats.st_dmaerr++;
+		safe_totalreset(sc);
+#if 0
+		safe_feed(sc);
+#endif
+	}
+
+	if (sc->sc_needwakeup) {		/* XXX check high watermark */
+		int wakeup = sc->sc_needwakeup & (CRYPTO_SYMQ|CRYPTO_ASYMQ);
+		DPRINTF(("%s: wakeup crypto %x\n", __func__,
+			sc->sc_needwakeup));
+		sc->sc_needwakeup &= ~wakeup;
+		crypto_unblock(sc->sc_cid, wakeup);
+	}
+	
+	return IRQ_HANDLED;
+}
+
+/*
+ * safe_feed() - post a request to chip
+ */
+static void
+safe_feed(struct safe_softc *sc, struct safe_ringentry *re)
+{
+	DPRINTF(("%s()\n", __FUNCTION__));
+#ifdef SAFE_DEBUG
+	if (debug) {
+		safe_dump_ringstate(sc, __func__);
+		safe_dump_request(sc, __func__, re);
+	}
+#endif
+	sc->sc_nqchip++;
+	if (sc->sc_nqchip > safestats.st_maxqchip)
+		safestats.st_maxqchip = sc->sc_nqchip;
+	/* poke h/w to check descriptor ring, any value can be written */
+	WRITE_REG(sc, SAFE_HI_RD_DESCR, 0);
+}
+
+#define	N(a)	(sizeof(a) / sizeof (a[0]))
+static void
+safe_setup_enckey(struct safe_session *ses, caddr_t key)
+{
+	int i;
+
+	bcopy(key, ses->ses_key, ses->ses_klen / 8);
+
+	/* PE is little-endian, insure proper byte order */
+	for (i = 0; i < N(ses->ses_key); i++)
+		ses->ses_key[i] = htole32(ses->ses_key[i]);
+}
+
+static void
+safe_setup_mackey(struct safe_session *ses, int algo, caddr_t key, int klen)
+{
+#ifdef HMAC_HACK
+	MD5_CTX md5ctx;
+	SHA1_CTX sha1ctx;
+	int i;
+
+
+	for (i = 0; i < klen; i++)
+		key[i] ^= HMAC_IPAD_VAL;
+
+	if (algo == CRYPTO_MD5_HMAC) {
+		MD5Init(&md5ctx);
+		MD5Update(&md5ctx, key, klen);
+		MD5Update(&md5ctx, hmac_ipad_buffer, MD5_HMAC_BLOCK_LEN - klen);
+		bcopy(md5ctx.md5_st8, ses->ses_hminner, sizeof(md5ctx.md5_st8));
+	} else {
+		SHA1Init(&sha1ctx);
+		SHA1Update(&sha1ctx, key, klen);
+		SHA1Update(&sha1ctx, hmac_ipad_buffer,
+		    SHA1_HMAC_BLOCK_LEN - klen);
+		bcopy(sha1ctx.h.b32, ses->ses_hminner, sizeof(sha1ctx.h.b32));
+	}
+
+	for (i = 0; i < klen; i++)
+		key[i] ^= (HMAC_IPAD_VAL ^ HMAC_OPAD_VAL);
+
+	if (algo == CRYPTO_MD5_HMAC) {
+		MD5Init(&md5ctx);
+		MD5Update(&md5ctx, key, klen);
+		MD5Update(&md5ctx, hmac_opad_buffer, MD5_HMAC_BLOCK_LEN - klen);
+		bcopy(md5ctx.md5_st8, ses->ses_hmouter, sizeof(md5ctx.md5_st8));
+	} else {
+		SHA1Init(&sha1ctx);
+		SHA1Update(&sha1ctx, key, klen);
+		SHA1Update(&sha1ctx, hmac_opad_buffer,
+		    SHA1_HMAC_BLOCK_LEN - klen);
+		bcopy(sha1ctx.h.b32, ses->ses_hmouter, sizeof(sha1ctx.h.b32));
+	}
+
+	for (i = 0; i < klen; i++)
+		key[i] ^= HMAC_OPAD_VAL;
+
+#if 0
+	/*
+	 * this code prevents SHA working on a BE host,
+	 * so it is obviously wrong.  I think the byte
+	 * swap setup we do with the chip fixes this for us
+	 */
+
+	/* PE is little-endian, insure proper byte order */
+	for (i = 0; i < N(ses->ses_hminner); i++) {
+		ses->ses_hminner[i] = htole32(ses->ses_hminner[i]);
+		ses->ses_hmouter[i] = htole32(ses->ses_hmouter[i]);
+	}
+#endif
+#else /* HMAC_HACK */
+	printk("safe: md5/sha not implemented\n");
+#endif /* HMAC_HACK */
+}
+#undef N
+
+/*
+ * Allocate a new 'session' and return an encoded session id.  'sidp'
+ * contains our registration id, and should contain an encoded session
+ * id on successful allocation.
+ */
+static int
+safe_newsession(device_t dev, u_int32_t *sidp, struct cryptoini *cri)
+{
+	struct safe_softc *sc = device_get_softc(dev);
+	struct cryptoini *c, *encini = NULL, *macini = NULL;
+	struct safe_session *ses = NULL;
+	int sesn;
+
+	DPRINTF(("%s()\n", __FUNCTION__));
+
+	if (sidp == NULL || cri == NULL || sc == NULL)
+		return (EINVAL);
+
+	for (c = cri; c != NULL; c = c->cri_next) {
+		if (c->cri_alg == CRYPTO_MD5_HMAC ||
+		    c->cri_alg == CRYPTO_SHA1_HMAC ||
+		    c->cri_alg == CRYPTO_NULL_HMAC) {
+			if (macini)
+				return (EINVAL);
+			macini = c;
+		} else if (c->cri_alg == CRYPTO_DES_CBC ||
+		    c->cri_alg == CRYPTO_3DES_CBC ||
+		    c->cri_alg == CRYPTO_AES_CBC ||
+		    c->cri_alg == CRYPTO_NULL_CBC) {
+			if (encini)
+				return (EINVAL);
+			encini = c;
+		} else
+			return (EINVAL);
+	}
+	if (encini == NULL && macini == NULL)
+		return (EINVAL);
+	if (encini) {			/* validate key length */
+		switch (encini->cri_alg) {
+		case CRYPTO_DES_CBC:
+			if (encini->cri_klen != 64)
+				return (EINVAL);
+			break;
+		case CRYPTO_3DES_CBC:
+			if (encini->cri_klen != 192)
+				return (EINVAL);
+			break;
+		case CRYPTO_AES_CBC:
+			if (encini->cri_klen != 128 &&
+			    encini->cri_klen != 192 &&
+			    encini->cri_klen != 256)
+				return (EINVAL);
+			break;
+		}
+	}
+
+	if (sc->sc_sessions == NULL) {
+		ses = sc->sc_sessions = (struct safe_session *)
+			kmalloc(sizeof(struct safe_session), SLAB_ATOMIC);
+		if (ses == NULL)
+			return (ENOMEM);
+		memset(ses, 0, sizeof(struct safe_session));
+		sesn = 0;
+		sc->sc_nsessions = 1;
+	} else {
+		for (sesn = 0; sesn < sc->sc_nsessions; sesn++) {
+			if (sc->sc_sessions[sesn].ses_used == 0) {
+				ses = &sc->sc_sessions[sesn];
+				break;
+			}
+		}
+
+		if (ses == NULL) {
+			sesn = sc->sc_nsessions;
+			ses = (struct safe_session *)
+				kmalloc((sesn + 1) * sizeof(struct safe_session), SLAB_ATOMIC);
+			if (ses == NULL)
+				return (ENOMEM);
+			memset(ses, 0, (sesn + 1) * sizeof(struct safe_session));
+			bcopy(sc->sc_sessions, ses, sesn *
+			    sizeof(struct safe_session));
+			bzero(sc->sc_sessions, sesn *
+			    sizeof(struct safe_session));
+			kfree(sc->sc_sessions);
+			sc->sc_sessions = ses;
+			ses = &sc->sc_sessions[sesn];
+			sc->sc_nsessions++;
+		}
+	}
+
+	bzero(ses, sizeof(struct safe_session));
+	ses->ses_used = 1;
+
+	if (encini) {
+		/* get an IV */
+		/* XXX may read fewer than requested */
+		read_random(ses->ses_iv, sizeof(ses->ses_iv));
+
+		ses->ses_klen = encini->cri_klen;
+		if (encini->cri_key != NULL)
+			safe_setup_enckey(ses, encini->cri_key);
+	}
+
+	if (macini) {
+		ses->ses_mlen = macini->cri_mlen;
+		if (ses->ses_mlen == 0) {
+			if (macini->cri_alg == CRYPTO_MD5_HMAC)
+				ses->ses_mlen = MD5_HASH_LEN;
+			else
+				ses->ses_mlen = SHA1_HASH_LEN;
+		}
+
+		if (macini->cri_key != NULL) {
+			safe_setup_mackey(ses, macini->cri_alg, macini->cri_key,
+			    macini->cri_klen / 8);
+		}
+	}
+
+	*sidp = SAFE_SID(device_get_unit(sc->sc_dev), sesn);
+	return (0);
+}
+
+/*
+ * Deallocate a session.
+ */
+static int
+safe_freesession(device_t dev, u_int64_t tid)
+{
+	struct safe_softc *sc = device_get_softc(dev);
+	int session, ret;
+	u_int32_t sid = ((u_int32_t) tid) & 0xffffffff;
+
+	DPRINTF(("%s()\n", __FUNCTION__));
+
+	if (sc == NULL)
+		return (EINVAL);
+
+	session = SAFE_SESSION(sid);
+	if (session < sc->sc_nsessions) {
+		bzero(&sc->sc_sessions[session], sizeof(sc->sc_sessions[session]));
+		ret = 0;
+	} else
+		ret = EINVAL;
+	return (ret);
+}
+
+
+static int
+safe_process(device_t dev, struct cryptop *crp, int hint)
+{
+	struct safe_softc *sc = device_get_softc(dev);
+	int err = 0, i, nicealign, uniform;
+	struct cryptodesc *crd1, *crd2, *maccrd, *enccrd;
+	int bypass, oplen, ivsize;
+	caddr_t iv;
+	int16_t coffset;
+	struct safe_session *ses;
+	struct safe_ringentry *re;
+	struct safe_sarec *sa;
+	struct safe_pdesc *pd;
+	u_int32_t cmd0, cmd1, staterec;
+	unsigned long flags;
+
+	DPRINTF(("%s()\n", __FUNCTION__));
+
+	if (crp == NULL || crp->crp_callback == NULL || sc == NULL) {
+		safestats.st_invalid++;
+		return (EINVAL);
+	}
+	if (SAFE_SESSION(crp->crp_sid) >= sc->sc_nsessions) {
+		safestats.st_badsession++;
+		return (EINVAL);
+	}
+
+	spin_lock_irqsave(&sc->sc_ringmtx, flags);
+	if (sc->sc_front == sc->sc_back && sc->sc_nqchip != 0) {
+		safestats.st_ringfull++;
+		sc->sc_needwakeup |= CRYPTO_SYMQ;
+		spin_unlock_irqrestore(&sc->sc_ringmtx, flags);
+		return (ERESTART);
+	}
+	re = sc->sc_front;
+
+	staterec = re->re_sa.sa_staterec;	/* save */
+	/* NB: zero everything but the PE descriptor */
+	bzero(&re->re_sa, sizeof(struct safe_ringentry) - sizeof(re->re_desc));
+	re->re_sa.sa_staterec = staterec;	/* restore */
+
+	re->re_crp = crp;
+	re->re_sesn = SAFE_SESSION(crp->crp_sid);
+
+	re->re_src.nsegs = 0;
+	re->re_dst.nsegs = 0;
+
+	if (crp->crp_flags & CRYPTO_F_SKBUF) {
+		re->re_src_skb = (struct sk_buff *)crp->crp_buf;
+		re->re_dst_skb = (struct sk_buff *)crp->crp_buf;
+	} else if (crp->crp_flags & CRYPTO_F_IOV) {
+		re->re_src_io = (struct uio *)crp->crp_buf;
+		re->re_dst_io = (struct uio *)crp->crp_buf;
+	} else {
+		safestats.st_badflags++;
+		err = EINVAL;
+		goto errout;	/* XXX we don't handle contiguous blocks! */
+	}
+
+	sa = &re->re_sa;
+	ses = &sc->sc_sessions[re->re_sesn];
+
+	crd1 = crp->crp_desc;
+	if (crd1 == NULL) {
+		safestats.st_nodesc++;
+		err = EINVAL;
+		goto errout;
+	}
+	crd2 = crd1->crd_next;
+
+	cmd0 = SAFE_SA_CMD0_BASIC;		/* basic group operation */
+	cmd1 = 0;
+	if (crd2 == NULL) {
+		if (crd1->crd_alg == CRYPTO_MD5_HMAC ||
+		    crd1->crd_alg == CRYPTO_SHA1_HMAC ||
+		    crd1->crd_alg == CRYPTO_NULL_HMAC) {
+			maccrd = crd1;
+			enccrd = NULL;
+			cmd0 |= SAFE_SA_CMD0_OP_HASH;
+		} else if (crd1->crd_alg == CRYPTO_DES_CBC ||
+		    crd1->crd_alg == CRYPTO_3DES_CBC ||
+		    crd1->crd_alg == CRYPTO_AES_CBC ||
+		    crd1->crd_alg == CRYPTO_NULL_CBC) {
+			maccrd = NULL;
+			enccrd = crd1;
+			cmd0 |= SAFE_SA_CMD0_OP_CRYPT;
+		} else {
+			safestats.st_badalg++;
+			err = EINVAL;
+			goto errout;
+		}
+	} else {
+		if ((crd1->crd_alg == CRYPTO_MD5_HMAC ||
+		    crd1->crd_alg == CRYPTO_SHA1_HMAC ||
+		    crd1->crd_alg == CRYPTO_NULL_HMAC) &&
+		    (crd2->crd_alg == CRYPTO_DES_CBC ||
+			crd2->crd_alg == CRYPTO_3DES_CBC ||
+		        crd2->crd_alg == CRYPTO_AES_CBC ||
+		        crd2->crd_alg == CRYPTO_NULL_CBC) &&
+		    ((crd2->crd_flags & CRD_F_ENCRYPT) == 0)) {
+			maccrd = crd1;
+			enccrd = crd2;
+		} else if ((crd1->crd_alg == CRYPTO_DES_CBC ||
+		    crd1->crd_alg == CRYPTO_3DES_CBC ||
+		    crd1->crd_alg == CRYPTO_AES_CBC ||
+		    crd1->crd_alg == CRYPTO_NULL_CBC) &&
+		    (crd2->crd_alg == CRYPTO_MD5_HMAC ||
+			crd2->crd_alg == CRYPTO_SHA1_HMAC ||
+			crd2->crd_alg == CRYPTO_NULL_HMAC) &&
+		    (crd1->crd_flags & CRD_F_ENCRYPT)) {
+			enccrd = crd1;
+			maccrd = crd2;
+		} else {
+			safestats.st_badalg++;
+			err = EINVAL;
+			goto errout;
+		}
+		cmd0 |= SAFE_SA_CMD0_OP_BOTH;
+	}
+
+	if (enccrd) {
+		if (enccrd->crd_flags & CRD_F_KEY_EXPLICIT)
+			safe_setup_enckey(ses, enccrd->crd_key);
+
+		if (enccrd->crd_alg == CRYPTO_DES_CBC) {
+			cmd0 |= SAFE_SA_CMD0_DES;
+			cmd1 |= SAFE_SA_CMD1_CBC;
+			ivsize = 2*sizeof(u_int32_t);
+		} else if (enccrd->crd_alg == CRYPTO_3DES_CBC) {
+			cmd0 |= SAFE_SA_CMD0_3DES;
+			cmd1 |= SAFE_SA_CMD1_CBC;
+			ivsize = 2*sizeof(u_int32_t);
+		} else if (enccrd->crd_alg == CRYPTO_AES_CBC) {
+			cmd0 |= SAFE_SA_CMD0_AES;
+			cmd1 |= SAFE_SA_CMD1_CBC;
+			if (ses->ses_klen == 128)
+			     cmd1 |=  SAFE_SA_CMD1_AES128;
+			else if (ses->ses_klen == 192)
+			     cmd1 |=  SAFE_SA_CMD1_AES192;
+			else
+			     cmd1 |=  SAFE_SA_CMD1_AES256;
+			ivsize = 4*sizeof(u_int32_t);
+		} else {
+			cmd0 |= SAFE_SA_CMD0_CRYPT_NULL;
+			ivsize = 0;
+		}
+
+		/*
+		 * Setup encrypt/decrypt state.  When using basic ops
+		 * we can't use an inline IV because hash/crypt offset
+		 * must be from the end of the IV to the start of the
+		 * crypt data and this leaves out the preceding header
+		 * from the hash calculation.  Instead we place the IV
+		 * in the state record and set the hash/crypt offset to
+		 * copy both the header+IV.
+		 */
+		if (enccrd->crd_flags & CRD_F_ENCRYPT) {
+			cmd0 |= SAFE_SA_CMD0_OUTBOUND;
+
+			if (enccrd->crd_flags & CRD_F_IV_EXPLICIT)
+				iv = enccrd->crd_iv;
+			else
+				iv = (caddr_t) ses->ses_iv;
+			if ((enccrd->crd_flags & CRD_F_IV_PRESENT) == 0) {
+				crypto_copyback(crp->crp_flags, crp->crp_buf,
+				    enccrd->crd_inject, ivsize, iv);
+			}
+			bcopy(iv, re->re_sastate.sa_saved_iv, ivsize);
+			/* make iv LE */
+			for (i = 0; i < ivsize/sizeof(re->re_sastate.sa_saved_iv[0]); i++)
+				re->re_sastate.sa_saved_iv[i] =
+					cpu_to_le32(re->re_sastate.sa_saved_iv[i]);
+			cmd0 |= SAFE_SA_CMD0_IVLD_STATE | SAFE_SA_CMD0_SAVEIV;
+			re->re_flags |= SAFE_QFLAGS_COPYOUTIV;
+		} else {
+			cmd0 |= SAFE_SA_CMD0_INBOUND;
+
+			if (enccrd->crd_flags & CRD_F_IV_EXPLICIT) {
+				bcopy(enccrd->crd_iv,
+					re->re_sastate.sa_saved_iv, ivsize);
+			} else {
+				crypto_copydata(crp->crp_flags, crp->crp_buf,
+				    enccrd->crd_inject, ivsize,
+				    (caddr_t)re->re_sastate.sa_saved_iv);
+			}
+			/* make iv LE */
+			for (i = 0; i < ivsize/sizeof(re->re_sastate.sa_saved_iv[0]); i++)
+				re->re_sastate.sa_saved_iv[i] =
+					cpu_to_le32(re->re_sastate.sa_saved_iv[i]);
+			cmd0 |= SAFE_SA_CMD0_IVLD_STATE;
+		}
+		/*
+		 * For basic encryption use the zero pad algorithm.
+		 * This pads results to an 8-byte boundary and
+		 * suppresses padding verification for inbound (i.e.
+		 * decrypt) operations.
+		 *
+		 * NB: Not sure if the 8-byte pad boundary is a problem.
+		 */
+		cmd0 |= SAFE_SA_CMD0_PAD_ZERO;
+
+		/* XXX assert key bufs have the same size */
+		bcopy(ses->ses_key, sa->sa_key, sizeof(sa->sa_key));
+	}
+
+	if (maccrd) {
+		if (maccrd->crd_flags & CRD_F_KEY_EXPLICIT) {
+			safe_setup_mackey(ses, maccrd->crd_alg,
+			    maccrd->crd_key, maccrd->crd_klen / 8);
+		}
+
+		if (maccrd->crd_alg == CRYPTO_MD5_HMAC) {
+			cmd0 |= SAFE_SA_CMD0_MD5;
+			cmd1 |= SAFE_SA_CMD1_HMAC;	/* NB: enable HMAC */
+		} else if (maccrd->crd_alg == CRYPTO_SHA1_HMAC) {
+			cmd0 |= SAFE_SA_CMD0_SHA1;
+			cmd1 |= SAFE_SA_CMD1_HMAC;	/* NB: enable HMAC */
+		} else {
+			cmd0 |= SAFE_SA_CMD0_HASH_NULL;
+		}
+		/*
+		 * Digest data is loaded from the SA and the hash
+		 * result is saved to the state block where we
+		 * retrieve it for return to the caller.
+		 */
+		/* XXX assert digest bufs have the same size */
+		bcopy(ses->ses_hminner, sa->sa_indigest,
+			sizeof(sa->sa_indigest));
+		bcopy(ses->ses_hmouter, sa->sa_outdigest,
+			sizeof(sa->sa_outdigest));
+
+		cmd0 |= SAFE_SA_CMD0_HSLD_SA | SAFE_SA_CMD0_SAVEHASH;
+		re->re_flags |= SAFE_QFLAGS_COPYOUTICV;
+	}
+
+	if (enccrd && maccrd) {
+		/*
+		 * The offset from hash data to the start of
+		 * crypt data is the difference in the skips.
+		 */
+		bypass = maccrd->crd_skip;
+		coffset = enccrd->crd_skip - maccrd->crd_skip;
+		if (coffset < 0) {
+			DPRINTF(("%s: hash does not precede crypt; "
+				"mac skip %u enc skip %u\n",
+				__func__, maccrd->crd_skip, enccrd->crd_skip));
+			safestats.st_skipmismatch++;
+			err = EINVAL;
+			goto errout;
+		}
+		oplen = enccrd->crd_skip + enccrd->crd_len;
+		if (maccrd->crd_skip + maccrd->crd_len != oplen) {
+			DPRINTF(("%s: hash amount %u != crypt amount %u\n",
+				__func__, maccrd->crd_skip + maccrd->crd_len,
+				oplen));
+			safestats.st_lenmismatch++;
+			err = EINVAL;
+			goto errout;
+		}
+#ifdef SAFE_DEBUG
+		if (debug) {
+			printf("mac: skip %d, len %d, inject %d\n",
+			    maccrd->crd_skip, maccrd->crd_len,
+			    maccrd->crd_inject);
+			printf("enc: skip %d, len %d, inject %d\n",
+			    enccrd->crd_skip, enccrd->crd_len,
+			    enccrd->crd_inject);
+			printf("bypass %d coffset %d oplen %d\n",
+				bypass, coffset, oplen);
+		}
+#endif
+		if (coffset & 3) {	/* offset must be 32-bit aligned */
+			DPRINTF(("%s: coffset %u misaligned\n",
+				__func__, coffset));
+			safestats.st_coffmisaligned++;
+			err = EINVAL;
+			goto errout;
+		}
+		coffset >>= 2;
+		if (coffset > 255) {	/* offset must be <256 dwords */
+			DPRINTF(("%s: coffset %u too big\n",
+				__func__, coffset));
+			safestats.st_cofftoobig++;
+			err = EINVAL;
+			goto errout;
+		}
+		/*
+		 * Tell the hardware to copy the header to the output.
+		 * The header is defined as the data from the end of
+		 * the bypass to the start of data to be encrypted. 
+		 * Typically this is the inline IV.  Note that you need
+		 * to do this even if src+dst are the same; it appears
+		 * that w/o this bit the crypted data is written
+		 * immediately after the bypass data.
+		 */
+		cmd1 |= SAFE_SA_CMD1_HDRCOPY;
+		/*
+		 * Disable IP header mutable bit handling.  This is
+		 * needed to get correct HMAC calculations.
+		 */
+		cmd1 |= SAFE_SA_CMD1_MUTABLE;
+	} else {
+		if (enccrd) {
+			bypass = enccrd->crd_skip;
+			oplen = bypass + enccrd->crd_len;
+		} else {
+			bypass = maccrd->crd_skip;
+			oplen = bypass + maccrd->crd_len;
+		}
+		coffset = 0;
+	}
+	/* XXX verify multiple of 4 when using s/g */
+	if (bypass > 96) {		/* bypass offset must be <= 96 bytes */
+		DPRINTF(("%s: bypass %u too big\n", __func__, bypass));
+		safestats.st_bypasstoobig++;
+		err = EINVAL;
+		goto errout;
+	}
+
+	if (crp->crp_flags & CRYPTO_F_SKBUF) {
+		if (pci_map_skb(sc, &re->re_src, re->re_src_skb)) {
+			safestats.st_noload++;
+			err = ENOMEM;
+			goto errout;
+		}
+	} else if (crp->crp_flags & CRYPTO_F_IOV) {
+		if (pci_map_uio(sc, &re->re_src, re->re_src_io)) {
+			safestats.st_noload++;
+			err = ENOMEM;
+			goto errout;
+		}
+	}
+	nicealign = safe_dmamap_aligned(sc, &re->re_src);
+	uniform = safe_dmamap_uniform(sc, &re->re_src);
+
+	DPRINTF(("src nicealign %u uniform %u nsegs %u\n",
+		nicealign, uniform, re->re_src.nsegs));
+	if (re->re_src.nsegs > 1) {
+		re->re_desc.d_src = sc->sc_spalloc.dma_paddr +
+			((caddr_t) sc->sc_spfree - (caddr_t) sc->sc_spring);
+		for (i = 0; i < re->re_src_nsegs; i++) {
+			/* NB: no need to check if there's space */
+			pd = sc->sc_spfree;
+			if (++(sc->sc_spfree) == sc->sc_springtop)
+				sc->sc_spfree = sc->sc_spring;
+
+			KASSERT((pd->pd_flags&3) == 0 ||
+				(pd->pd_flags&3) == SAFE_PD_DONE,
+				("bogus source particle descriptor; flags %x",
+				pd->pd_flags));
+			pd->pd_addr = re->re_src_segs[i].ds_addr;
+			pd->pd_size = re->re_src_segs[i].ds_len;
+			pd->pd_flags = SAFE_PD_READY;
+		}
+		cmd0 |= SAFE_SA_CMD0_IGATHER;
+	} else {
+		/*
+		 * No need for gather, reference the operand directly.
+		 */
+		re->re_desc.d_src = re->re_src_segs[0].ds_addr;
+	}
+
+	if (enccrd == NULL && maccrd != NULL) {
+		/*
+		 * Hash op; no destination needed.
+		 */
+	} else {
+		if (crp->crp_flags & (CRYPTO_F_IOV|CRYPTO_F_SKBUF)) {
+			if (!nicealign) {
+				safestats.st_iovmisaligned++;
+				err = EINVAL;
+				goto errout;
+			}
+			if (uniform != 1) {
+				device_printf(sc->sc_dev, "!uniform source\n");
+				if (!uniform) {
+					/*
+					 * There's no way to handle the DMA
+					 * requirements with this uio.  We
+					 * could create a separate DMA area for
+					 * the result and then copy it back,
+					 * but for now we just bail and return
+					 * an error.  Note that uio requests
+					 * > SAFE_MAX_DSIZE are handled because
+					 * the DMA map and segment list for the
+					 * destination wil result in a
+					 * destination particle list that does
+					 * the necessary scatter DMA.
+					 */ 
+					safestats.st_iovnotuniform++;
+					err = EINVAL;
+					goto errout;
+				}
+			} else
+				re->re_dst = re->re_src;
+		} else {
+			safestats.st_badflags++;
+			err = EINVAL;
+			goto errout;
+		}
+
+		if (re->re_dst.nsegs > 1) {
+			re->re_desc.d_dst = sc->sc_dpalloc.dma_paddr +
+			    ((caddr_t) sc->sc_dpfree - (caddr_t) sc->sc_dpring);
+			for (i = 0; i < re->re_dst_nsegs; i++) {
+				pd = sc->sc_dpfree;
+				KASSERT((pd->pd_flags&3) == 0 ||
+					(pd->pd_flags&3) == SAFE_PD_DONE,
+					("bogus dest particle descriptor; flags %x",
+						pd->pd_flags));
+				if (++(sc->sc_dpfree) == sc->sc_dpringtop)
+					sc->sc_dpfree = sc->sc_dpring;
+				pd->pd_addr = re->re_dst_segs[i].ds_addr;
+				pd->pd_flags = SAFE_PD_READY;
+			}
+			cmd0 |= SAFE_SA_CMD0_OSCATTER;
+		} else {
+			/*
+			 * No need for scatter, reference the operand directly.
+			 */
+			re->re_desc.d_dst = re->re_dst_segs[0].ds_addr;
+		}
+	}
+
+	/*
+	 * All done with setup; fillin the SA command words
+	 * and the packet engine descriptor.  The operation
+	 * is now ready for submission to the hardware.
+	 */
+	sa->sa_cmd0 = cmd0 | SAFE_SA_CMD0_IPCI | SAFE_SA_CMD0_OPCI;
+	sa->sa_cmd1 = cmd1
+		    | (coffset << SAFE_SA_CMD1_OFFSET_S)
+		    | SAFE_SA_CMD1_SAREV1	/* Rev 1 SA data structure */
+		    | SAFE_SA_CMD1_SRPCI
+		    ;
+	/*
+	 * NB: the order of writes is important here.  In case the
+	 * chip is scanning the ring because of an outstanding request
+	 * it might nab this one too.  In that case we need to make
+	 * sure the setup is complete before we write the length
+	 * field of the descriptor as it signals the descriptor is
+	 * ready for processing.
+	 */
+	re->re_desc.d_csr = SAFE_PE_CSR_READY | SAFE_PE_CSR_SAPCI;
+	if (maccrd)
+		re->re_desc.d_csr |= SAFE_PE_CSR_LOADSA | SAFE_PE_CSR_HASHFINAL;
+	wmb();
+	re->re_desc.d_len = oplen
+			  | SAFE_PE_LEN_READY
+			  | (bypass << SAFE_PE_LEN_BYPASS_S)
+			  ;
+
+	safestats.st_ipackets++;
+	safestats.st_ibytes += oplen;
+
+	if (++(sc->sc_front) == sc->sc_ringtop)
+		sc->sc_front = sc->sc_ring;
+
+	/* XXX honor batching */
+	safe_feed(sc, re);
+	spin_unlock_irqrestore(&sc->sc_ringmtx, flags);
+	return (0);
+
+errout:
+	if (re->re_src.map != re->re_dst.map)
+		pci_unmap_operand(sc, &re->re_dst);
+	if (re->re_src.map)
+		pci_unmap_operand(sc, &re->re_src);
+	spin_unlock_irqrestore(&sc->sc_ringmtx, flags);
+	if (err != ERESTART) {
+		crp->crp_etype = err;
+		crypto_done(crp);
+	} else {
+		sc->sc_needwakeup |= CRYPTO_SYMQ;
+	}
+	return (err);
+}
+
+static void
+safe_callback(struct safe_softc *sc, struct safe_ringentry *re)
+{
+	struct cryptop *crp = (struct cryptop *)re->re_crp;
+	struct cryptodesc *crd;
+
+	DPRINTF(("%s()\n", __FUNCTION__));
+
+	safestats.st_opackets++;
+	safestats.st_obytes += re->re_dst.mapsize;
+
+	if (re->re_desc.d_csr & SAFE_PE_CSR_STATUS) {
+		device_printf(sc->sc_dev, "csr 0x%x cmd0 0x%x cmd1 0x%x\n",
+			re->re_desc.d_csr,
+			re->re_sa.sa_cmd0, re->re_sa.sa_cmd1);
+		safestats.st_peoperr++;
+		crp->crp_etype = EIO;		/* something more meaningful? */
+	}
+
+	if (re->re_dst.map != NULL && re->re_dst.map != re->re_src.map)
+		pci_unmap_operand(sc, &re->re_dst);
+	pci_unmap_operand(sc, &re->re_src);
+
+	/* 
+	 * If result was written to a differet mbuf chain, swap
+	 * it in as the return value and reclaim the original.
+	 */
+	if ((crp->crp_flags & CRYPTO_F_SKBUF) && re->re_src_skb != re->re_dst_skb) {
+		device_printf(sc->sc_dev, "no CRYPTO_F_SKBUF swapping support\n");
+		/* kfree_skb(skb) */
+		/* crp->crp_buf = (caddr_t)re->re_dst_skb */
+		return;
+	}
+
+	if (re->re_flags & SAFE_QFLAGS_COPYOUTIV) {
+		/* copy out IV for future use */
+		for (crd = crp->crp_desc; crd; crd = crd->crd_next) {
+			int i;
+			int ivsize;
+
+			if (crd->crd_alg == CRYPTO_DES_CBC ||
+			    crd->crd_alg == CRYPTO_3DES_CBC) {
+				ivsize = 2*sizeof(u_int32_t);
+			} else if (crd->crd_alg == CRYPTO_AES_CBC) {
+				ivsize = 4*sizeof(u_int32_t);
+			} else
+				continue;
+			crypto_copydata(crp->crp_flags, crp->crp_buf,
+			    crd->crd_skip + crd->crd_len - ivsize, ivsize,
+			    (caddr_t)sc->sc_sessions[re->re_sesn].ses_iv);
+			for (i = 0;
+					i < ivsize/sizeof(sc->sc_sessions[re->re_sesn].ses_iv[0]);
+					i++)
+				sc->sc_sessions[re->re_sesn].ses_iv[i] =
+					cpu_to_le32(sc->sc_sessions[re->re_sesn].ses_iv[i]);
+			break;
+		}
+	}
+
+	if (re->re_flags & SAFE_QFLAGS_COPYOUTICV) {
+		/* copy out ICV result */
+		for (crd = crp->crp_desc; crd; crd = crd->crd_next) {
+			if (!(crd->crd_alg == CRYPTO_MD5_HMAC ||
+			    crd->crd_alg == CRYPTO_SHA1_HMAC ||
+			    crd->crd_alg == CRYPTO_NULL_HMAC))
+				continue;
+			if (crd->crd_alg == CRYPTO_SHA1_HMAC) {
+				/*
+				 * SHA-1 ICV's are byte-swapped; fix 'em up
+				 * before copy them to their destination.
+				 */
+				re->re_sastate.sa_saved_indigest[0] =
+					cpu_to_be32(re->re_sastate.sa_saved_indigest[0]);
+				re->re_sastate.sa_saved_indigest[1] = 
+					cpu_to_be32(re->re_sastate.sa_saved_indigest[1]);
+				re->re_sastate.sa_saved_indigest[2] =
+					cpu_to_be32(re->re_sastate.sa_saved_indigest[2]);
+			} else {
+				re->re_sastate.sa_saved_indigest[0] =
+					cpu_to_le32(re->re_sastate.sa_saved_indigest[0]);
+				re->re_sastate.sa_saved_indigest[1] = 
+					cpu_to_le32(re->re_sastate.sa_saved_indigest[1]);
+				re->re_sastate.sa_saved_indigest[2] =
+					cpu_to_le32(re->re_sastate.sa_saved_indigest[2]);
+			}
+			crypto_copyback(crp->crp_flags, crp->crp_buf,
+			    crd->crd_inject,
+			    sc->sc_sessions[re->re_sesn].ses_mlen,
+			    (caddr_t)re->re_sastate.sa_saved_indigest);
+			break;
+		}
+	}
+	crypto_done(crp);
+}
+
+
+#if defined(CONFIG_OCF_RANDOMHARVEST) && !defined(SAFE_NO_RNG)
+#define	SAFE_RNG_MAXWAIT	1000
+
+static void
+safe_rng_init(struct safe_softc *sc)
+{
+	u_int32_t w, v;
+	int i;
+
+	DPRINTF(("%s()\n", __FUNCTION__));
+
+	WRITE_REG(sc, SAFE_RNG_CTRL, 0);
+	/* use default value according to the manual */
+	WRITE_REG(sc, SAFE_RNG_CNFG, 0x834);	/* magic from SafeNet */
+	WRITE_REG(sc, SAFE_RNG_ALM_CNT, 0);
+
+	/*
+	 * There is a bug in rev 1.0 of the 1140 that when the RNG
+	 * is brought out of reset the ready status flag does not
+	 * work until the RNG has finished its internal initialization.
+	 *
+	 * So in order to determine the device is through its
+	 * initialization we must read the data register, using the
+	 * status reg in the read in case it is initialized.  Then read
+	 * the data register until it changes from the first read.
+	 * Once it changes read the data register until it changes
+	 * again.  At this time the RNG is considered initialized. 
+	 * This could take between 750ms - 1000ms in time.
+	 */
+	i = 0;
+	w = READ_REG(sc, SAFE_RNG_OUT);
+	do {
+		v = READ_REG(sc, SAFE_RNG_OUT);
+		if (v != w) {
+			w = v;
+			break;
+		}
+		DELAY(10);
+	} while (++i < SAFE_RNG_MAXWAIT);
+
+	/* Wait Until data changes again */
+	i = 0;
+	do {
+		v = READ_REG(sc, SAFE_RNG_OUT);
+		if (v != w)
+			break;
+		DELAY(10);
+	} while (++i < SAFE_RNG_MAXWAIT);
+}
+
+static __inline void
+safe_rng_disable_short_cycle(struct safe_softc *sc)
+{
+	DPRINTF(("%s()\n", __FUNCTION__));
+
+	WRITE_REG(sc, SAFE_RNG_CTRL,
+		READ_REG(sc, SAFE_RNG_CTRL) &~ SAFE_RNG_CTRL_SHORTEN);
+}
+
+static __inline void
+safe_rng_enable_short_cycle(struct safe_softc *sc)
+{
+	DPRINTF(("%s()\n", __FUNCTION__));
+
+	WRITE_REG(sc, SAFE_RNG_CTRL, 
+		READ_REG(sc, SAFE_RNG_CTRL) | SAFE_RNG_CTRL_SHORTEN);
+}
+
+static __inline u_int32_t
+safe_rng_read(struct safe_softc *sc)
+{
+	int i;
+
+	i = 0;
+	while (READ_REG(sc, SAFE_RNG_STAT) != 0 && ++i < SAFE_RNG_MAXWAIT)
+		;
+	return READ_REG(sc, SAFE_RNG_OUT);
+}
+
+static int
+safe_read_random(void *arg, u_int32_t *buf, int maxwords)
+{
+	struct safe_softc *sc = (struct safe_softc *) arg;
+	int i, rc;
+
+	DPRINTF(("%s()\n", __FUNCTION__));
+	
+	safestats.st_rng++;
+	/*
+	 * Fetch the next block of data.
+	 */
+	if (maxwords > safe_rngbufsize)
+		maxwords = safe_rngbufsize;
+	if (maxwords > SAFE_RNG_MAXBUFSIZ)
+		maxwords = SAFE_RNG_MAXBUFSIZ;
+retry:
+	/* read as much as we can */
+	for (rc = 0; rc < maxwords; rc++) {
+		if (READ_REG(sc, SAFE_RNG_STAT) != 0)
+			break;
+		buf[rc] = READ_REG(sc, SAFE_RNG_OUT);
+	}
+	if (rc == 0)
+		return 0;
+	/*
+	 * Check the comparator alarm count and reset the h/w if
+	 * it exceeds our threshold.  This guards against the
+	 * hardware oscillators resonating with external signals.
+	 */
+	if (READ_REG(sc, SAFE_RNG_ALM_CNT) > safe_rngmaxalarm) {
+		u_int32_t freq_inc, w;
+
+		DPRINTF(("%s: alarm count %u exceeds threshold %u\n", __func__,
+			(unsigned)READ_REG(sc, SAFE_RNG_ALM_CNT), safe_rngmaxalarm));
+		safestats.st_rngalarm++;
+		safe_rng_enable_short_cycle(sc);
+		freq_inc = 18;
+		for (i = 0; i < 64; i++) {
+			w = READ_REG(sc, SAFE_RNG_CNFG);
+			freq_inc = ((w + freq_inc) & 0x3fL);
+			w = ((w & ~0x3fL) | freq_inc);
+			WRITE_REG(sc, SAFE_RNG_CNFG, w);
+
+			WRITE_REG(sc, SAFE_RNG_ALM_CNT, 0);
+
+			(void) safe_rng_read(sc);
+			DELAY(25);
+
+			if (READ_REG(sc, SAFE_RNG_ALM_CNT) == 0) {
+				safe_rng_disable_short_cycle(sc);
+				goto retry;
+			}
+			freq_inc = 1;
+		}
+		safe_rng_disable_short_cycle(sc);
+	} else
+		WRITE_REG(sc, SAFE_RNG_ALM_CNT, 0);
+
+	return(rc);
+}
+#endif /* defined(CONFIG_OCF_RANDOMHARVEST) && !defined(SAFE_NO_RNG) */
+
+
+/*
+ * Resets the board.  Values in the regesters are left as is
+ * from the reset (i.e. initial values are assigned elsewhere).
+ */
+static void
+safe_reset_board(struct safe_softc *sc)
+{
+	u_int32_t v;
+	/*
+	 * Reset the device.  The manual says no delay
+	 * is needed between marking and clearing reset.
+	 */
+	DPRINTF(("%s()\n", __FUNCTION__));
+
+	v = READ_REG(sc, SAFE_PE_DMACFG) &~
+		(SAFE_PE_DMACFG_PERESET | SAFE_PE_DMACFG_PDRRESET |
+		 SAFE_PE_DMACFG_SGRESET);
+	WRITE_REG(sc, SAFE_PE_DMACFG, v
+				    | SAFE_PE_DMACFG_PERESET
+				    | SAFE_PE_DMACFG_PDRRESET
+				    | SAFE_PE_DMACFG_SGRESET);
+	WRITE_REG(sc, SAFE_PE_DMACFG, v);
+}
+
+/*
+ * Initialize registers we need to touch only once.
+ */
+static void
+safe_init_board(struct safe_softc *sc)
+{
+	u_int32_t v, dwords;
+
+	DPRINTF(("%s()\n", __FUNCTION__));
+
+	v = READ_REG(sc, SAFE_PE_DMACFG);
+	v &=~ (   SAFE_PE_DMACFG_PEMODE
+			| SAFE_PE_DMACFG_FSENA		/* failsafe enable */
+			| SAFE_PE_DMACFG_GPRPCI		/* gather ring on PCI */
+			| SAFE_PE_DMACFG_SPRPCI		/* scatter ring on PCI */
+			| SAFE_PE_DMACFG_ESDESC		/* endian-swap descriptors */
+			| SAFE_PE_DMACFG_ESPDESC	/* endian-swap part. desc's */
+			| SAFE_PE_DMACFG_ESSA		/* endian-swap SA's */
+			| SAFE_PE_DMACFG_ESPACKET	/* swap the packet data */
+		  );
+	v |= SAFE_PE_DMACFG_FSENA		/* failsafe enable */
+	  |  SAFE_PE_DMACFG_GPRPCI		/* gather ring on PCI */
+	  |  SAFE_PE_DMACFG_SPRPCI		/* scatter ring on PCI */
+	  |  SAFE_PE_DMACFG_ESDESC		/* endian-swap descriptors */
+	  |  SAFE_PE_DMACFG_ESPDESC		/* endian-swap part. desc's */
+	  |  SAFE_PE_DMACFG_ESSA		/* endian-swap SA's */
+#if 0
+	  |  SAFE_PE_DMACFG_ESPACKET    /* swap the packet data */
+#endif
+	  ;
+	WRITE_REG(sc, SAFE_PE_DMACFG, v);
+
+#ifdef __BIG_ENDIAN
+	/* tell the safenet that we are 4321 and not 1234 */
+	WRITE_REG(sc, SAFE_ENDIAN, 0xe4e41b1b);
+#endif
+
+	if (sc->sc_chiprev == SAFE_REV(1,0)) {
+		/*
+		 * Avoid large PCI DMA transfers.  Rev 1.0 has a bug where
+		 * "target mode transfers" done while the chip is DMA'ing
+		 * >1020 bytes cause the hardware to lockup.  To avoid this
+		 * we reduce the max PCI transfer size and use small source
+		 * particle descriptors (<= 256 bytes).
+		 */
+		WRITE_REG(sc, SAFE_DMA_CFG, 256);
+		device_printf(sc->sc_dev,
+			"Reduce max DMA size to %u words for rev %u.%u WAR\n",
+			(unsigned) ((READ_REG(sc, SAFE_DMA_CFG)>>2) & 0xff),
+			(unsigned) SAFE_REV_MAJ(sc->sc_chiprev),
+			(unsigned) SAFE_REV_MIN(sc->sc_chiprev));
+		sc->sc_max_dsize = 256;
+	} else {
+		sc->sc_max_dsize = SAFE_MAX_DSIZE;
+	}
+
+	/* NB: operands+results are overlaid */
+	WRITE_REG(sc, SAFE_PE_PDRBASE, sc->sc_ringalloc.dma_paddr);
+	WRITE_REG(sc, SAFE_PE_RDRBASE, sc->sc_ringalloc.dma_paddr);
+	/*
+	 * Configure ring entry size and number of items in the ring.
+	 */
+	KASSERT((sizeof(struct safe_ringentry) % sizeof(u_int32_t)) == 0,
+		("PE ring entry not 32-bit aligned!"));
+	dwords = sizeof(struct safe_ringentry) / sizeof(u_int32_t);
+	WRITE_REG(sc, SAFE_PE_RINGCFG,
+		(dwords << SAFE_PE_RINGCFG_OFFSET_S) | SAFE_MAX_NQUEUE);
+	WRITE_REG(sc, SAFE_PE_RINGPOLL, 0);	/* disable polling */
+
+	WRITE_REG(sc, SAFE_PE_GRNGBASE, sc->sc_spalloc.dma_paddr);
+	WRITE_REG(sc, SAFE_PE_SRNGBASE, sc->sc_dpalloc.dma_paddr);
+	WRITE_REG(sc, SAFE_PE_PARTSIZE,
+		(SAFE_TOTAL_DPART<<16) | SAFE_TOTAL_SPART);
+	/*
+	 * NB: destination particles are fixed size.  We use
+	 *     an mbuf cluster and require all results go to
+	 *     clusters or smaller.
+	 */
+	WRITE_REG(sc, SAFE_PE_PARTCFG, sc->sc_max_dsize);
+
+	/* it's now safe to enable PE mode, do it */
+	WRITE_REG(sc, SAFE_PE_DMACFG, v | SAFE_PE_DMACFG_PEMODE);
+
+	/*
+	 * Configure hardware to use level-triggered interrupts and
+	 * to interrupt after each descriptor is processed.
+	 */
+	WRITE_REG(sc, SAFE_HI_CFG, SAFE_HI_CFG_LEVEL);
+	WRITE_REG(sc, SAFE_HI_CLR, 0xffffffff);
+	WRITE_REG(sc, SAFE_HI_DESC_CNT, 1);
+	WRITE_REG(sc, SAFE_HI_MASK, SAFE_INT_PE_DDONE | SAFE_INT_PE_ERROR);
+}
+
+
+/*
+ * Clean up after a chip crash.
+ * It is assumed that the caller in splimp()
+ */
+static void
+safe_cleanchip(struct safe_softc *sc)
+{
+	DPRINTF(("%s()\n", __FUNCTION__));
+
+	if (sc->sc_nqchip != 0) {
+		struct safe_ringentry *re = sc->sc_back;
+
+		while (re != sc->sc_front) {
+			if (re->re_desc.d_csr != 0)
+				safe_free_entry(sc, re);
+			if (++re == sc->sc_ringtop)
+				re = sc->sc_ring;
+		}
+		sc->sc_back = re;
+		sc->sc_nqchip = 0;
+	}
+}
+
+/*
+ * free a safe_q
+ * It is assumed that the caller is within splimp().
+ */
+static int
+safe_free_entry(struct safe_softc *sc, struct safe_ringentry *re)
+{
+	struct cryptop *crp;
+
+	DPRINTF(("%s()\n", __FUNCTION__));
+
+	/*
+	 * Free header MCR
+	 */
+	if ((re->re_dst_skb != NULL) && (re->re_src_skb != re->re_dst_skb))
+#ifdef NOTYET
+		m_freem(re->re_dst_m);
+#else
+		printk("%s,%d: SKB not supported\n", __FILE__, __LINE__);
+#endif
+
+	crp = (struct cryptop *)re->re_crp;
+	
+	re->re_desc.d_csr = 0;
+	
+	crp->crp_etype = EFAULT;
+	crypto_done(crp);
+	return(0);
+}
+
+/*
+ * Routine to reset the chip and clean up.
+ * It is assumed that the caller is in splimp()
+ */
+static void
+safe_totalreset(struct safe_softc *sc)
+{
+	DPRINTF(("%s()\n", __FUNCTION__));
+
+	safe_reset_board(sc);
+	safe_init_board(sc);
+	safe_cleanchip(sc);
+}
+
+/*
+ * Is the operand suitable aligned for direct DMA.  Each
+ * segment must be aligned on a 32-bit boundary and all
+ * but the last segment must be a multiple of 4 bytes.
+ */
+static int
+safe_dmamap_aligned(struct safe_softc *sc, const struct safe_operand *op)
+{
+	int i;
+
+	DPRINTF(("%s()\n", __FUNCTION__));
+
+	for (i = 0; i < op->nsegs; i++) {
+		if (op->segs[i].ds_addr & 3)
+			return (0);
+		if (i != (op->nsegs - 1) && (op->segs[i].ds_len & 3))
+			return (0);
+	}
+	return (1);
+}
+
+/*
+ * Is the operand suitable for direct DMA as the destination
+ * of an operation.  The hardware requires that each ``particle''
+ * but the last in an operation result have the same size.  We
+ * fix that size at SAFE_MAX_DSIZE bytes.  This routine returns
+ * 0 if some segment is not a multiple of of this size, 1 if all
+ * segments are exactly this size, or 2 if segments are at worst
+ * a multple of this size.
+ */
+static int
+safe_dmamap_uniform(struct safe_softc *sc, const struct safe_operand *op)
+{
+	int result = 1;
+
+	DPRINTF(("%s()\n", __FUNCTION__));
+
+	if (op->nsegs > 0) {
+		int i;
+
+		for (i = 0; i < op->nsegs-1; i++) {
+			if (op->segs[i].ds_len % sc->sc_max_dsize)
+				return (0);
+			if (op->segs[i].ds_len != sc->sc_max_dsize)
+				result = 2;
+		}
+	}
+	return (result);
+}
+
+static int
+safe_kprocess(device_t dev, struct cryptkop *krp, int hint)
+{
+	struct safe_softc *sc = device_get_softc(dev);
+	struct safe_pkq *q;
+	unsigned long flags;
+
+	DPRINTF(("%s()\n", __FUNCTION__));
+
+	if (sc == NULL) {
+		krp->krp_status = EINVAL;
+		goto err;
+	}
+
+	if (krp->krp_op != CRK_MOD_EXP) {
+		krp->krp_status = EOPNOTSUPP;
+		goto err;
+	}
+
+	q = (struct safe_pkq *) kmalloc(sizeof(*q), GFP_KERNEL);
+	if (q == NULL) {
+		krp->krp_status = ENOMEM;
+		goto err;
+	}
+	memset(q, 0, sizeof(*q));
+	q->pkq_krp = krp;
+	INIT_LIST_HEAD(&q->pkq_list);
+
+	spin_lock_irqsave(&sc->sc_pkmtx, flags);
+	list_add_tail(&q->pkq_list, &sc->sc_pkq);
+	safe_kfeed(sc);
+	spin_unlock_irqrestore(&sc->sc_pkmtx, flags);
+	return (0);
+
+err:
+	crypto_kdone(krp);
+	return (0);
+}
+
+#define	SAFE_CRK_PARAM_BASE	0
+#define	SAFE_CRK_PARAM_EXP	1
+#define	SAFE_CRK_PARAM_MOD	2
+
+static int
+safe_kstart(struct safe_softc *sc)
+{
+	struct cryptkop *krp = sc->sc_pkq_cur->pkq_krp;
+	int exp_bits, mod_bits, base_bits;
+	u_int32_t op, a_off, b_off, c_off, d_off;
+
+	DPRINTF(("%s()\n", __FUNCTION__));
+
+	if (krp->krp_iparams < 3 || krp->krp_oparams != 1) {
+		krp->krp_status = EINVAL;
+		return (1);
+	}
+
+	base_bits = safe_ksigbits(sc, &krp->krp_param[SAFE_CRK_PARAM_BASE]);
+	if (base_bits > 2048)
+		goto too_big;
+	if (base_bits <= 0)		/* 5. base not zero */
+		goto too_small;
+
+	exp_bits = safe_ksigbits(sc, &krp->krp_param[SAFE_CRK_PARAM_EXP]);
+	if (exp_bits > 2048)
+		goto too_big;
+	if (exp_bits <= 0)		/* 1. exponent word length > 0 */
+		goto too_small;		/* 4. exponent not zero */
+
+	mod_bits = safe_ksigbits(sc, &krp->krp_param[SAFE_CRK_PARAM_MOD]);
+	if (mod_bits > 2048)
+		goto too_big;
+	if (mod_bits <= 32)		/* 2. modulus word length > 1 */
+		goto too_small;		/* 8. MSW of modulus != zero */
+	if (mod_bits < exp_bits)	/* 3 modulus len >= exponent len */
+		goto too_small;
+	if ((krp->krp_param[SAFE_CRK_PARAM_MOD].crp_p[0] & 1) == 0)
+		goto bad_domain;	/* 6. modulus is odd */
+	if (mod_bits > krp->krp_param[krp->krp_iparams].crp_nbits)
+		goto too_small;		/* make sure result will fit */
+
+	/* 7. modulus > base */
+	if (mod_bits < base_bits)
+		goto too_small;
+	if (mod_bits == base_bits) {
+		u_int8_t *basep, *modp;
+		int i;
+
+		basep = krp->krp_param[SAFE_CRK_PARAM_BASE].crp_p +
+		    ((base_bits + 7) / 8) - 1;
+		modp = krp->krp_param[SAFE_CRK_PARAM_MOD].crp_p +
+		    ((mod_bits + 7) / 8) - 1;
+		
+		for (i = 0; i < (mod_bits + 7) / 8; i++, basep--, modp--) {
+			if (*modp < *basep)
+				goto too_small;
+			if (*modp > *basep)
+				break;
+		}
+	}
+
+	/* And on the 9th step, he rested. */
+
+	WRITE_REG(sc, SAFE_PK_A_LEN, (exp_bits + 31) / 32);
+	WRITE_REG(sc, SAFE_PK_B_LEN, (mod_bits + 31) / 32);
+	if (mod_bits > 1024) {
+		op = SAFE_PK_FUNC_EXP4;
+		a_off = 0x000;
+		b_off = 0x100;
+		c_off = 0x200;
+		d_off = 0x300;
+	} else {
+		op = SAFE_PK_FUNC_EXP16;
+		a_off = 0x000;
+		b_off = 0x080;
+		c_off = 0x100;
+		d_off = 0x180;
+	}
+	sc->sc_pk_reslen = b_off - a_off;
+	sc->sc_pk_resoff = d_off;
+
+	/* A is exponent, B is modulus, C is base, D is result */
+	safe_kload_reg(sc, a_off, b_off - a_off,
+	    &krp->krp_param[SAFE_CRK_PARAM_EXP]);
+	WRITE_REG(sc, SAFE_PK_A_ADDR, a_off >> 2);
+	safe_kload_reg(sc, b_off, b_off - a_off,
+	    &krp->krp_param[SAFE_CRK_PARAM_MOD]);
+	WRITE_REG(sc, SAFE_PK_B_ADDR, b_off >> 2);
+	safe_kload_reg(sc, c_off, b_off - a_off,
+	    &krp->krp_param[SAFE_CRK_PARAM_BASE]);
+	WRITE_REG(sc, SAFE_PK_C_ADDR, c_off >> 2);
+	WRITE_REG(sc, SAFE_PK_D_ADDR, d_off >> 2);
+
+	WRITE_REG(sc, SAFE_PK_FUNC, op | SAFE_PK_FUNC_RUN);
+
+	return (0);
+
+too_big:
+	krp->krp_status = E2BIG;
+	return (1);
+too_small:
+	krp->krp_status = ERANGE;
+	return (1);
+bad_domain:
+	krp->krp_status = EDOM;
+	return (1);
+}
+
+static int
+safe_ksigbits(struct safe_softc *sc, struct crparam *cr)
+{
+	u_int plen = (cr->crp_nbits + 7) / 8;
+	int i, sig = plen * 8;
+	u_int8_t c, *p = cr->crp_p;
+
+	DPRINTF(("%s()\n", __FUNCTION__));
+
+	for (i = plen - 1; i >= 0; i--) {
+		c = p[i];
+		if (c != 0) {
+			while ((c & 0x80) == 0) {
+				sig--;
+				c <<= 1;
+			}
+			break;
+		}
+		sig -= 8;
+	}
+	return (sig);
+}
+
+static void
+safe_kfeed(struct safe_softc *sc)
+{
+	struct safe_pkq *q, *tmp;
+
+	DPRINTF(("%s()\n", __FUNCTION__));
+
+	if (list_empty(&sc->sc_pkq) && sc->sc_pkq_cur == NULL)
+		return;
+	if (sc->sc_pkq_cur != NULL)
+		return;
+	list_for_each_entry_safe(q, tmp, &sc->sc_pkq, pkq_list) {
+		sc->sc_pkq_cur = q;
+		list_del(&q->pkq_list);
+		if (safe_kstart(sc) != 0) {
+			crypto_kdone(q->pkq_krp);
+			kfree(q);
+			sc->sc_pkq_cur = NULL;
+		} else {
+			/* op started, start polling */
+			mod_timer(&sc->sc_pkto, jiffies + 1);
+			break;
+		}
+	}
+}
+
+static void
+safe_kpoll(unsigned long arg)
+{
+	struct safe_softc *sc = NULL;
+	struct safe_pkq *q;
+	struct crparam *res;
+	int i;
+	u_int32_t buf[64];
+	unsigned long flags;
+
+	DPRINTF(("%s()\n", __FUNCTION__));
+
+	if (arg >= SAFE_MAX_CHIPS)
+		return;
+	sc = safe_chip_idx[arg];
+	if (!sc) {
+		DPRINTF(("%s() - bad callback\n", __FUNCTION__));
+		return;
+	}
+
+	spin_lock_irqsave(&sc->sc_pkmtx, flags);
+	if (sc->sc_pkq_cur == NULL)
+		goto out;
+	if (READ_REG(sc, SAFE_PK_FUNC) & SAFE_PK_FUNC_RUN) {
+		/* still running, check back later */
+		mod_timer(&sc->sc_pkto, jiffies + 1);
+		goto out;
+	}
+
+	q = sc->sc_pkq_cur;
+	res = &q->pkq_krp->krp_param[q->pkq_krp->krp_iparams];
+	bzero(buf, sizeof(buf));
+	bzero(res->crp_p, (res->crp_nbits + 7) / 8);
+	for (i = 0; i < sc->sc_pk_reslen >> 2; i++)
+		buf[i] = le32_to_cpu(READ_REG(sc, SAFE_PK_RAM_START +
+		    sc->sc_pk_resoff + (i << 2)));
+	bcopy(buf, res->crp_p, (res->crp_nbits + 7) / 8);
+	/*
+	 * reduce the bits that need copying if possible
+	 */
+	res->crp_nbits = min(res->crp_nbits,sc->sc_pk_reslen * 8);
+	res->crp_nbits = safe_ksigbits(sc, res);
+
+	for (i = SAFE_PK_RAM_START; i < SAFE_PK_RAM_END; i += 4)
+		WRITE_REG(sc, i, 0);
+
+	crypto_kdone(q->pkq_krp);
+	kfree(q);
+	sc->sc_pkq_cur = NULL;
+
+	safe_kfeed(sc);
+out:
+	spin_unlock_irqrestore(&sc->sc_pkmtx, flags);
+}
+
+static void
+safe_kload_reg(struct safe_softc *sc, u_int32_t off, u_int32_t len,
+    struct crparam *n)
+{
+	u_int32_t buf[64], i;
+
+	DPRINTF(("%s()\n", __FUNCTION__));
+
+	bzero(buf, sizeof(buf));
+	bcopy(n->crp_p, buf, (n->crp_nbits + 7) / 8);
+
+	for (i = 0; i < len >> 2; i++)
+		WRITE_REG(sc, SAFE_PK_RAM_START + off + (i << 2),
+		    cpu_to_le32(buf[i]));
+}
+
+#ifdef SAFE_DEBUG
+static void
+safe_dump_dmastatus(struct safe_softc *sc, const char *tag)
+{
+	printf("%s: ENDIAN 0x%x SRC 0x%x DST 0x%x STAT 0x%x\n"
+		, tag
+		, READ_REG(sc, SAFE_DMA_ENDIAN)
+		, READ_REG(sc, SAFE_DMA_SRCADDR)
+		, READ_REG(sc, SAFE_DMA_DSTADDR)
+		, READ_REG(sc, SAFE_DMA_STAT)
+	);
+}
+
+static void
+safe_dump_intrstate(struct safe_softc *sc, const char *tag)
+{
+	printf("%s: HI_CFG 0x%x HI_MASK 0x%x HI_DESC_CNT 0x%x HU_STAT 0x%x HM_STAT 0x%x\n"
+		, tag
+		, READ_REG(sc, SAFE_HI_CFG)
+		, READ_REG(sc, SAFE_HI_MASK)
+		, READ_REG(sc, SAFE_HI_DESC_CNT)
+		, READ_REG(sc, SAFE_HU_STAT)
+		, READ_REG(sc, SAFE_HM_STAT)
+	);
+}
+
+static void
+safe_dump_ringstate(struct safe_softc *sc, const char *tag)
+{
+	u_int32_t estat = READ_REG(sc, SAFE_PE_ERNGSTAT);
+
+	/* NB: assume caller has lock on ring */
+	printf("%s: ERNGSTAT %x (next %u) back %lu front %lu\n",
+		tag,
+		estat, (estat >> SAFE_PE_ERNGSTAT_NEXT_S),
+		(unsigned long)(sc->sc_back - sc->sc_ring),
+		(unsigned long)(sc->sc_front - sc->sc_ring));
+}
+
+static void
+safe_dump_request(struct safe_softc *sc, const char* tag, struct safe_ringentry *re)
+{
+	int ix, nsegs;
+
+	ix = re - sc->sc_ring;
+	printf("%s: %p (%u): csr %x src %x dst %x sa %x len %x\n"
+		, tag
+		, re, ix
+		, re->re_desc.d_csr
+		, re->re_desc.d_src
+		, re->re_desc.d_dst
+		, re->re_desc.d_sa
+		, re->re_desc.d_len
+	);
+	if (re->re_src.nsegs > 1) {
+		ix = (re->re_desc.d_src - sc->sc_spalloc.dma_paddr) /
+			sizeof(struct safe_pdesc);
+		for (nsegs = re->re_src.nsegs; nsegs; nsegs--) {
+			printf(" spd[%u] %p: %p size %u flags %x"
+				, ix, &sc->sc_spring[ix]
+				, (caddr_t)(uintptr_t) sc->sc_spring[ix].pd_addr
+				, sc->sc_spring[ix].pd_size
+				, sc->sc_spring[ix].pd_flags
+			);
+			if (sc->sc_spring[ix].pd_size == 0)
+				printf(" (zero!)");
+			printf("\n");
+			if (++ix == SAFE_TOTAL_SPART)
+				ix = 0;
+		}
+	}
+	if (re->re_dst.nsegs > 1) {
+		ix = (re->re_desc.d_dst - sc->sc_dpalloc.dma_paddr) /
+			sizeof(struct safe_pdesc);
+		for (nsegs = re->re_dst.nsegs; nsegs; nsegs--) {
+			printf(" dpd[%u] %p: %p flags %x\n"
+				, ix, &sc->sc_dpring[ix]
+				, (caddr_t)(uintptr_t) sc->sc_dpring[ix].pd_addr
+				, sc->sc_dpring[ix].pd_flags
+			);
+			if (++ix == SAFE_TOTAL_DPART)
+				ix = 0;
+		}
+	}
+	printf("sa: cmd0 %08x cmd1 %08x staterec %x\n",
+		re->re_sa.sa_cmd0, re->re_sa.sa_cmd1, re->re_sa.sa_staterec);
+	printf("sa: key %x %x %x %x %x %x %x %x\n"
+		, re->re_sa.sa_key[0]
+		, re->re_sa.sa_key[1]
+		, re->re_sa.sa_key[2]
+		, re->re_sa.sa_key[3]
+		, re->re_sa.sa_key[4]
+		, re->re_sa.sa_key[5]
+		, re->re_sa.sa_key[6]
+		, re->re_sa.sa_key[7]
+	);
+	printf("sa: indigest %x %x %x %x %x\n"
+		, re->re_sa.sa_indigest[0]
+		, re->re_sa.sa_indigest[1]
+		, re->re_sa.sa_indigest[2]
+		, re->re_sa.sa_indigest[3]
+		, re->re_sa.sa_indigest[4]
+	);
+	printf("sa: outdigest %x %x %x %x %x\n"
+		, re->re_sa.sa_outdigest[0]
+		, re->re_sa.sa_outdigest[1]
+		, re->re_sa.sa_outdigest[2]
+		, re->re_sa.sa_outdigest[3]
+		, re->re_sa.sa_outdigest[4]
+	);
+	printf("sr: iv %x %x %x %x\n"
+		, re->re_sastate.sa_saved_iv[0]
+		, re->re_sastate.sa_saved_iv[1]
+		, re->re_sastate.sa_saved_iv[2]
+		, re->re_sastate.sa_saved_iv[3]
+	);
+	printf("sr: hashbc %u indigest %x %x %x %x %x\n"
+		, re->re_sastate.sa_saved_hashbc
+		, re->re_sastate.sa_saved_indigest[0]
+		, re->re_sastate.sa_saved_indigest[1]
+		, re->re_sastate.sa_saved_indigest[2]
+		, re->re_sastate.sa_saved_indigest[3]
+		, re->re_sastate.sa_saved_indigest[4]
+	);
+}
+
+static void
+safe_dump_ring(struct safe_softc *sc, const char *tag)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&sc->sc_ringmtx, flags);
+	printf("\nSafeNet Ring State:\n");
+	safe_dump_intrstate(sc, tag);
+	safe_dump_dmastatus(sc, tag);
+	safe_dump_ringstate(sc, tag);
+	if (sc->sc_nqchip) {
+		struct safe_ringentry *re = sc->sc_back;
+		do {
+			safe_dump_request(sc, tag, re);
+			if (++re == sc->sc_ringtop)
+				re = sc->sc_ring;
+		} while (re != sc->sc_front);
+	}
+	spin_unlock_irqrestore(&sc->sc_ringmtx, flags);
+}
+#endif /* SAFE_DEBUG */
+
+
+static int safe_probe(struct pci_dev *dev, const struct pci_device_id *ent)
+{
+	struct safe_softc *sc = NULL;
+	u32 mem_start, mem_len, cmd;
+	int i, rc, devinfo;
+	dma_addr_t raddr;
+	static int num_chips = 0;
+
+	DPRINTF(("%s()\n", __FUNCTION__));
+
+	if (pci_enable_device(dev) < 0)
+		return(-ENODEV);
+
+	if (!dev->irq) {
+		printk("safe: found device with no IRQ assigned. check BIOS settings!");
+		pci_disable_device(dev);
+		return(-ENODEV);
+	}
+
+	if (pci_set_mwi(dev)) {
+		printk("safe: pci_set_mwi failed!");
+		return(-ENODEV);
+	}
+
+	sc = (struct safe_softc *) kmalloc(sizeof(*sc), GFP_KERNEL);
+	if (!sc)
+		return(-ENOMEM);
+	memset(sc, 0, sizeof(*sc));
+
+	softc_device_init(sc, "safe", num_chips, safe_methods);
+
+	sc->sc_irq = -1;
+	sc->sc_cid = -1;
+	sc->sc_pcidev = dev;
+	if (num_chips < SAFE_MAX_CHIPS) {
+		safe_chip_idx[device_get_unit(sc->sc_dev)] = sc;
+		num_chips++;
+	}
+
+	INIT_LIST_HEAD(&sc->sc_pkq);
+	spin_lock_init(&sc->sc_pkmtx);
+
+	pci_set_drvdata(sc->sc_pcidev, sc);
+
+	/* we read its hardware registers as memory */
+	mem_start = pci_resource_start(sc->sc_pcidev, 0);
+	mem_len   = pci_resource_len(sc->sc_pcidev, 0);
+
+	sc->sc_base_addr = (ocf_iomem_t) ioremap(mem_start, mem_len);
+	if (!sc->sc_base_addr) {
+		device_printf(sc->sc_dev, "failed to ioremap 0x%x-0x%x\n",
+				mem_start, mem_start + mem_len - 1);
+		goto out;
+	}
+
+	/* fix up the bus size */
+	if (pci_set_dma_mask(sc->sc_pcidev, DMA_32BIT_MASK)) {
+		device_printf(sc->sc_dev, "No usable DMA configuration, aborting.\n");
+		goto out;
+	}
+	if (pci_set_consistent_dma_mask(sc->sc_pcidev, DMA_32BIT_MASK)) {
+		device_printf(sc->sc_dev, "No usable consistent DMA configuration, aborting.\n");
+		goto out;
+	}
+
+	pci_set_master(sc->sc_pcidev);
+
+	pci_read_config_dword(sc->sc_pcidev, PCI_COMMAND, &cmd);
+
+	if (!(cmd & PCI_COMMAND_MEMORY)) {
+		device_printf(sc->sc_dev, "failed to enable memory mapping\n");
+		goto out;
+	}
+
+	if (!(cmd & PCI_COMMAND_MASTER)) {
+		device_printf(sc->sc_dev, "failed to enable bus mastering\n");
+		goto out;
+	}
+
+	rc = request_irq(dev->irq, safe_intr, IRQF_SHARED, "safe", sc);
+	if (rc) {
+		device_printf(sc->sc_dev, "failed to hook irq %d\n", sc->sc_irq);
+		goto out;
+	}
+	sc->sc_irq = dev->irq;
+
+	sc->sc_chiprev = READ_REG(sc, SAFE_DEVINFO) &
+			(SAFE_DEVINFO_REV_MAJ | SAFE_DEVINFO_REV_MIN);
+
+	/*
+	 * Allocate packet engine descriptors.
+	 */
+	sc->sc_ringalloc.dma_vaddr = pci_alloc_consistent(sc->sc_pcidev,
+			SAFE_MAX_NQUEUE * sizeof (struct safe_ringentry),
+			&sc->sc_ringalloc.dma_paddr);
+	if (!sc->sc_ringalloc.dma_vaddr) {
+		device_printf(sc->sc_dev, "cannot allocate PE descriptor ring\n");
+		goto out;
+	}
+
+	/*
+	 * Hookup the static portion of all our data structures.
+	 */
+	sc->sc_ring = (struct safe_ringentry *) sc->sc_ringalloc.dma_vaddr;
+	sc->sc_ringtop = sc->sc_ring + SAFE_MAX_NQUEUE;
+	sc->sc_front = sc->sc_ring;
+	sc->sc_back = sc->sc_ring;
+	raddr = sc->sc_ringalloc.dma_paddr;
+	bzero(sc->sc_ring, SAFE_MAX_NQUEUE * sizeof(struct safe_ringentry));
+	for (i = 0; i < SAFE_MAX_NQUEUE; i++) {
+		struct safe_ringentry *re = &sc->sc_ring[i];
+
+		re->re_desc.d_sa = raddr +
+			offsetof(struct safe_ringentry, re_sa);
+		re->re_sa.sa_staterec = raddr +
+			offsetof(struct safe_ringentry, re_sastate);
+
+		raddr += sizeof (struct safe_ringentry);
+	}
+	spin_lock_init(&sc->sc_ringmtx);
+
+	/*
+	 * Allocate scatter and gather particle descriptors.
+	 */
+	sc->sc_spalloc.dma_vaddr = pci_alloc_consistent(sc->sc_pcidev,
+			SAFE_TOTAL_SPART * sizeof (struct safe_pdesc),
+			&sc->sc_spalloc.dma_paddr);
+	if (!sc->sc_spalloc.dma_vaddr) {
+		device_printf(sc->sc_dev, "cannot allocate source particle descriptor ring\n");
+		goto out;
+	}
+	sc->sc_spring = (struct safe_pdesc *) sc->sc_spalloc.dma_vaddr;
+	sc->sc_springtop = sc->sc_spring + SAFE_TOTAL_SPART;
+	sc->sc_spfree = sc->sc_spring;
+	bzero(sc->sc_spring, SAFE_TOTAL_SPART * sizeof(struct safe_pdesc));
+
+	sc->sc_dpalloc.dma_vaddr = pci_alloc_consistent(sc->sc_pcidev,
+			SAFE_TOTAL_DPART * sizeof (struct safe_pdesc),
+			&sc->sc_dpalloc.dma_paddr);
+	if (!sc->sc_dpalloc.dma_vaddr) {
+		device_printf(sc->sc_dev, "cannot allocate destination particle descriptor ring\n");
+		goto out;
+	}
+	sc->sc_dpring = (struct safe_pdesc *) sc->sc_dpalloc.dma_vaddr;
+	sc->sc_dpringtop = sc->sc_dpring + SAFE_TOTAL_DPART;
+	sc->sc_dpfree = sc->sc_dpring;
+	bzero(sc->sc_dpring, SAFE_TOTAL_DPART * sizeof(struct safe_pdesc));
+
+	sc->sc_cid = crypto_get_driverid(softc_get_device(sc), CRYPTOCAP_F_HARDWARE);
+	if (sc->sc_cid < 0) {
+		device_printf(sc->sc_dev, "could not get crypto driver id\n");
+		goto out;
+	}
+
+	printf("%s:", device_get_nameunit(sc->sc_dev));
+
+	devinfo = READ_REG(sc, SAFE_DEVINFO);
+	if (devinfo & SAFE_DEVINFO_RNG) {
+		sc->sc_flags |= SAFE_FLAGS_RNG;
+		printf(" rng");
+	}
+	if (devinfo & SAFE_DEVINFO_PKEY) {
+		printf(" key");
+		sc->sc_flags |= SAFE_FLAGS_KEY;
+		crypto_kregister(sc->sc_cid, CRK_MOD_EXP, 0);
+#if 0
+		crypto_kregister(sc->sc_cid, CRK_MOD_EXP_CRT, 0);
+#endif
+		init_timer(&sc->sc_pkto);
+		sc->sc_pkto.function = safe_kpoll;
+		sc->sc_pkto.data = (unsigned long) device_get_unit(sc->sc_dev);
+	}
+	if (devinfo & SAFE_DEVINFO_DES) {
+		printf(" des/3des");
+		crypto_register(sc->sc_cid, CRYPTO_3DES_CBC, 0, 0);
+		crypto_register(sc->sc_cid, CRYPTO_DES_CBC, 0, 0);
+	}
+	if (devinfo & SAFE_DEVINFO_AES) {
+		printf(" aes");
+		crypto_register(sc->sc_cid, CRYPTO_AES_CBC, 0, 0);
+	}
+	if (devinfo & SAFE_DEVINFO_MD5) {
+		printf(" md5");
+		crypto_register(sc->sc_cid, CRYPTO_MD5_HMAC, 0, 0);
+	}
+	if (devinfo & SAFE_DEVINFO_SHA1) {
+		printf(" sha1");
+		crypto_register(sc->sc_cid, CRYPTO_SHA1_HMAC, 0, 0);
+	}
+	printf(" null");
+	crypto_register(sc->sc_cid, CRYPTO_NULL_CBC, 0, 0);
+	crypto_register(sc->sc_cid, CRYPTO_NULL_HMAC, 0, 0);
+	/* XXX other supported algorithms */
+	printf("\n");
+
+	safe_reset_board(sc);		/* reset h/w */
+	safe_init_board(sc);		/* init h/w */
+
+#if defined(CONFIG_OCF_RANDOMHARVEST) && !defined(SAFE_NO_RNG)
+	if (sc->sc_flags & SAFE_FLAGS_RNG) {
+		safe_rng_init(sc);
+		crypto_rregister(sc->sc_cid, safe_read_random, sc);
+	}
+#endif /* SAFE_NO_RNG */
+
+	return (0);
+
+out:
+	if (sc->sc_cid >= 0)
+		crypto_unregister_all(sc->sc_cid);
+	if (sc->sc_irq != -1)
+		free_irq(sc->sc_irq, sc);
+	if (sc->sc_ringalloc.dma_vaddr)
+		pci_free_consistent(sc->sc_pcidev,
+				SAFE_MAX_NQUEUE * sizeof (struct safe_ringentry),
+				sc->sc_ringalloc.dma_vaddr, sc->sc_ringalloc.dma_paddr);
+	if (sc->sc_spalloc.dma_vaddr)
+		pci_free_consistent(sc->sc_pcidev,
+				SAFE_TOTAL_DPART * sizeof (struct safe_pdesc),
+				sc->sc_spalloc.dma_vaddr, sc->sc_spalloc.dma_paddr);
+	if (sc->sc_dpalloc.dma_vaddr)
+		pci_free_consistent(sc->sc_pcidev,
+				SAFE_TOTAL_DPART * sizeof (struct safe_pdesc),
+				sc->sc_dpalloc.dma_vaddr, sc->sc_dpalloc.dma_paddr);
+	kfree(sc);
+	return(-ENODEV);
+}
+
+static void safe_remove(struct pci_dev *dev)
+{
+	struct safe_softc *sc = pci_get_drvdata(dev);
+
+	DPRINTF(("%s()\n", __FUNCTION__));
+
+	/* XXX wait/abort active ops */
+
+	WRITE_REG(sc, SAFE_HI_MASK, 0);		/* disable interrupts */
+
+	del_timer_sync(&sc->sc_pkto);
+
+	crypto_unregister_all(sc->sc_cid);
+
+	safe_cleanchip(sc);
+
+	if (sc->sc_irq != -1)
+		free_irq(sc->sc_irq, sc);
+	if (sc->sc_ringalloc.dma_vaddr)
+		pci_free_consistent(sc->sc_pcidev,
+				SAFE_MAX_NQUEUE * sizeof (struct safe_ringentry),
+				sc->sc_ringalloc.dma_vaddr, sc->sc_ringalloc.dma_paddr);
+	if (sc->sc_spalloc.dma_vaddr)
+		pci_free_consistent(sc->sc_pcidev,
+				SAFE_TOTAL_DPART * sizeof (struct safe_pdesc),
+				sc->sc_spalloc.dma_vaddr, sc->sc_spalloc.dma_paddr);
+	if (sc->sc_dpalloc.dma_vaddr)
+		pci_free_consistent(sc->sc_pcidev,
+				SAFE_TOTAL_DPART * sizeof (struct safe_pdesc),
+				sc->sc_dpalloc.dma_vaddr, sc->sc_dpalloc.dma_paddr);
+	sc->sc_irq = -1;
+	sc->sc_ringalloc.dma_vaddr = NULL;
+	sc->sc_spalloc.dma_vaddr = NULL;
+	sc->sc_dpalloc.dma_vaddr = NULL;
+}
+
+static struct pci_device_id safe_pci_tbl[] = {
+	{ PCI_VENDOR_SAFENET, PCI_PRODUCT_SAFEXCEL,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, },
+	{ },
+};
+MODULE_DEVICE_TABLE(pci, safe_pci_tbl);
+
+static struct pci_driver safe_driver = {
+	.name         = "safe",
+	.id_table     = safe_pci_tbl,
+	.probe        =	safe_probe,
+	.remove       = safe_remove,
+	/* add PM stuff here one day */
+};
+
+static int __init safe_init (void)
+{
+	struct safe_softc *sc = NULL;
+	int rc;
+
+	DPRINTF(("%s(%p)\n", __FUNCTION__, safe_init));
+
+	rc = pci_register_driver(&safe_driver);
+	pci_register_driver_compat(&safe_driver, rc);
+
+	return rc;
+}
+
+static void __exit safe_exit (void)
+{
+	pci_unregister_driver(&safe_driver);
+}
+
+module_init(safe_init);
+module_exit(safe_exit);
+
+MODULE_LICENSE("BSD");
+MODULE_AUTHOR("David McCullough <david_mccullough@mcafee.com>");
+MODULE_DESCRIPTION("OCF driver for safenet PCI crypto devices");
diff --git a/target/linux/generic/files/crypto/ocf/safe/safereg.h b/target/linux/generic/files/crypto/ocf/safe/safereg.h
new file mode 100644
index 0000000000..dbaf98fe78
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/safe/safereg.h
@@ -0,0 +1,421 @@
+/*-
+ * Copyright (c) 2003 Sam Leffler, Errno Consulting
+ * Copyright (c) 2003 Global Technology Associates, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $FreeBSD: src/sys/dev/safe/safereg.h,v 1.1 2003/07/21 21:46:07 sam Exp $
+ */
+#ifndef _SAFE_SAFEREG_H_
+#define	_SAFE_SAFEREG_H_
+
+/*
+ * Register definitions for SafeNet SafeXcel-1141 crypto device.
+ * Definitions from revision 1.3 (Nov 6 2002) of the User's Manual.
+ */
+
+#define BS_BAR			0x10	/* DMA base address register */
+#define	BS_TRDY_TIMEOUT		0x40	/* TRDY timeout */
+#define	BS_RETRY_TIMEOUT	0x41	/* DMA retry timeout */
+
+#define	PCI_VENDOR_SAFENET	0x16ae		/* SafeNet, Inc. */
+
+/* SafeNet */
+#define	PCI_PRODUCT_SAFEXCEL	0x1141		/* 1141 */
+
+#define	SAFE_PE_CSR		0x0000	/* Packet Enginge Ctrl/Status */
+#define	SAFE_PE_SRC		0x0004	/* Packet Engine Source */
+#define	SAFE_PE_DST		0x0008	/* Packet Engine Destination */
+#define	SAFE_PE_SA		0x000c	/* Packet Engine SA */
+#define	SAFE_PE_LEN		0x0010	/* Packet Engine Length */
+#define	SAFE_PE_DMACFG		0x0040	/* Packet Engine DMA Configuration */
+#define	SAFE_PE_DMASTAT		0x0044	/* Packet Engine DMA Status */
+#define	SAFE_PE_PDRBASE		0x0048	/* Packet Engine Descriptor Ring Base */
+#define	SAFE_PE_RDRBASE		0x004c	/* Packet Engine Result Ring Base */
+#define	SAFE_PE_RINGCFG		0x0050	/* Packet Engine Ring Configuration */
+#define	SAFE_PE_RINGPOLL	0x0054	/* Packet Engine Ring Poll */
+#define	SAFE_PE_IRNGSTAT	0x0058	/* Packet Engine Internal Ring Status */
+#define	SAFE_PE_ERNGSTAT	0x005c	/* Packet Engine External Ring Status */
+#define	SAFE_PE_IOTHRESH	0x0060	/* Packet Engine I/O Threshold */
+#define	SAFE_PE_GRNGBASE	0x0064	/* Packet Engine Gather Ring Base */
+#define	SAFE_PE_SRNGBASE	0x0068	/* Packet Engine Scatter Ring Base */
+#define	SAFE_PE_PARTSIZE	0x006c	/* Packet Engine Particlar Ring Size */
+#define	SAFE_PE_PARTCFG		0x0070	/* Packet Engine Particle Ring Config */
+#define	SAFE_CRYPTO_CTRL	0x0080	/* Crypto Control */
+#define	SAFE_DEVID		0x0084	/* Device ID */
+#define	SAFE_DEVINFO		0x0088	/* Device Info */
+#define	SAFE_HU_STAT		0x00a0	/* Host Unmasked Status */
+#define	SAFE_HM_STAT		0x00a4	/* Host Masked Status (read-only) */
+#define	SAFE_HI_CLR		0x00a4	/* Host Clear Interrupt (write-only) */
+#define	SAFE_HI_MASK		0x00a8	/* Host Mask Control */
+#define	SAFE_HI_CFG		0x00ac	/* Interrupt Configuration */
+#define	SAFE_HI_RD_DESCR	0x00b4	/* Force Descriptor Read */
+#define	SAFE_HI_DESC_CNT	0x00b8	/* Host Descriptor Done Count */
+#define	SAFE_DMA_ENDIAN		0x00c0	/* Master Endian Status */
+#define	SAFE_DMA_SRCADDR	0x00c4	/* DMA Source Address Status */
+#define	SAFE_DMA_DSTADDR	0x00c8	/* DMA Destination Address Status */
+#define	SAFE_DMA_STAT		0x00cc	/* DMA Current Status */
+#define	SAFE_DMA_CFG		0x00d4	/* DMA Configuration/Status */
+#define	SAFE_ENDIAN		0x00e0	/* Endian Configuration */
+#define	SAFE_PK_A_ADDR		0x0800	/* Public Key A Address */
+#define	SAFE_PK_B_ADDR		0x0804	/* Public Key B Address */
+#define	SAFE_PK_C_ADDR		0x0808	/* Public Key C Address */
+#define	SAFE_PK_D_ADDR		0x080c	/* Public Key D Address */
+#define	SAFE_PK_A_LEN		0x0810	/* Public Key A Length */
+#define	SAFE_PK_B_LEN		0x0814	/* Public Key B Length */
+#define	SAFE_PK_SHIFT		0x0818	/* Public Key Shift */
+#define	SAFE_PK_FUNC		0x081c	/* Public Key Function */
+#define SAFE_PK_RAM_START	0x1000	/* Public Key RAM start address */
+#define SAFE_PK_RAM_END		0x1fff	/* Public Key RAM end address */
+
+#define	SAFE_RNG_OUT		0x0100	/* RNG Output */
+#define	SAFE_RNG_STAT		0x0104	/* RNG Status */
+#define	SAFE_RNG_CTRL		0x0108	/* RNG Control */
+#define	SAFE_RNG_A		0x010c	/* RNG A */
+#define	SAFE_RNG_B		0x0110	/* RNG B */
+#define	SAFE_RNG_X_LO		0x0114	/* RNG X [31:0] */
+#define	SAFE_RNG_X_MID		0x0118	/* RNG X [63:32] */
+#define	SAFE_RNG_X_HI		0x011c	/* RNG X [80:64] */
+#define	SAFE_RNG_X_CNTR		0x0120	/* RNG Counter */
+#define	SAFE_RNG_ALM_CNT	0x0124	/* RNG Alarm Count */
+#define	SAFE_RNG_CNFG		0x0128	/* RNG Configuration */
+#define	SAFE_RNG_LFSR1_LO	0x012c	/* RNG LFSR1 [31:0] */
+#define	SAFE_RNG_LFSR1_HI	0x0130	/* RNG LFSR1 [47:32] */
+#define	SAFE_RNG_LFSR2_LO	0x0134	/* RNG LFSR1 [31:0] */
+#define	SAFE_RNG_LFSR2_HI	0x0138	/* RNG LFSR1 [47:32] */
+
+#define	SAFE_PE_CSR_READY	0x00000001	/* ready for processing */
+#define	SAFE_PE_CSR_DONE	0x00000002	/* h/w completed processing */
+#define	SAFE_PE_CSR_LOADSA	0x00000004	/* load SA digests */
+#define	SAFE_PE_CSR_HASHFINAL	0x00000010	/* do hash pad & write result */
+#define	SAFE_PE_CSR_SABUSID	0x000000c0	/* bus id for SA */
+#define	SAFE_PE_CSR_SAPCI	0x00000040	/* PCI bus id for SA */
+#define	SAFE_PE_CSR_NXTHDR	0x0000ff00	/* next hdr value for IPsec */
+#define	SAFE_PE_CSR_FPAD	0x0000ff00	/* fixed pad for basic ops */
+#define	SAFE_PE_CSR_STATUS	0x00ff0000	/* operation result status */
+#define	SAFE_PE_CSR_AUTH_FAIL	0x00010000	/* ICV mismatch (inbound) */
+#define	SAFE_PE_CSR_PAD_FAIL	0x00020000	/* pad verify fail (inbound) */
+#define	SAFE_PE_CSR_SEQ_FAIL	0x00040000	/* sequence number (inbound) */
+#define	SAFE_PE_CSR_XERROR	0x00080000	/* extended error follows */
+#define	SAFE_PE_CSR_XECODE	0x00f00000	/* extended error code */
+#define	SAFE_PE_CSR_XECODE_S	20
+#define	SAFE_PE_CSR_XECODE_BADCMD	0	/* invalid command */
+#define	SAFE_PE_CSR_XECODE_BADALG	1	/* invalid algorithm */
+#define	SAFE_PE_CSR_XECODE_ALGDIS	2	/* algorithm disabled */
+#define	SAFE_PE_CSR_XECODE_ZEROLEN	3	/* zero packet length */
+#define	SAFE_PE_CSR_XECODE_DMAERR	4	/* bus DMA error */
+#define	SAFE_PE_CSR_XECODE_PIPEABORT	5	/* secondary bus DMA error */
+#define	SAFE_PE_CSR_XECODE_BADSPI	6	/* IPsec SPI mismatch */
+#define	SAFE_PE_CSR_XECODE_TIMEOUT	10	/* failsafe timeout */
+#define	SAFE_PE_CSR_PAD		0xff000000	/* ESP padding control/status */
+#define	SAFE_PE_CSR_PAD_MIN	0x00000000	/* minimum IPsec padding */
+#define	SAFE_PE_CSR_PAD_16	0x08000000	/* pad to 16-byte boundary */
+#define	SAFE_PE_CSR_PAD_32	0x10000000	/* pad to 32-byte boundary */
+#define	SAFE_PE_CSR_PAD_64	0x20000000	/* pad to 64-byte boundary */
+#define	SAFE_PE_CSR_PAD_128	0x40000000	/* pad to 128-byte boundary */
+#define	SAFE_PE_CSR_PAD_256	0x80000000	/* pad to 256-byte boundary */
+
+/*
+ * Check the CSR to see if the PE has returned ownership to
+ * the host.  Note that before processing a descriptor this
+ * must be done followed by a check of the SAFE_PE_LEN register
+ * status bits to avoid premature processing of a descriptor
+ * on its way back to the host.
+ */
+#define	SAFE_PE_CSR_IS_DONE(_csr) \
+    (((_csr) & (SAFE_PE_CSR_READY | SAFE_PE_CSR_DONE)) == SAFE_PE_CSR_DONE)
+
+#define	SAFE_PE_LEN_LENGTH	0x000fffff	/* total length (bytes) */
+#define	SAFE_PE_LEN_READY	0x00400000	/* ready for processing */
+#define	SAFE_PE_LEN_DONE	0x00800000	/* h/w completed processing */
+#define	SAFE_PE_LEN_BYPASS	0xff000000	/* bypass offset (bytes) */
+#define	SAFE_PE_LEN_BYPASS_S	24
+
+#define	SAFE_PE_LEN_IS_DONE(_len) \
+    (((_len) & (SAFE_PE_LEN_READY | SAFE_PE_LEN_DONE)) == SAFE_PE_LEN_DONE)
+
+/* NB: these apply to HU_STAT, HM_STAT, HI_CLR, and HI_MASK */
+#define	SAFE_INT_PE_CDONE	0x00000002	/* PE context done */
+#define	SAFE_INT_PE_DDONE	0x00000008	/* PE descriptor done */
+#define	SAFE_INT_PE_ERROR	0x00000010	/* PE error */
+#define	SAFE_INT_PE_ODONE	0x00000020	/* PE operation done */
+
+#define	SAFE_HI_CFG_PULSE	0x00000001	/* use pulse interrupt */
+#define	SAFE_HI_CFG_LEVEL	0x00000000	/* use level interrupt */
+#define	SAFE_HI_CFG_AUTOCLR	0x00000002	/* auto-clear pulse interrupt */
+
+#define	SAFE_ENDIAN_PASS	0x000000e4	/* straight pass-thru */
+#define	SAFE_ENDIAN_SWAB	0x0000001b	/* swap bytes in 32-bit word */
+
+#define	SAFE_PE_DMACFG_PERESET	0x00000001	/* reset packet engine */
+#define	SAFE_PE_DMACFG_PDRRESET	0x00000002	/* reset PDR counters/ptrs */
+#define	SAFE_PE_DMACFG_SGRESET	0x00000004	/* reset scatter/gather cache */
+#define	SAFE_PE_DMACFG_FSENA	0x00000008	/* enable failsafe reset */
+#define	SAFE_PE_DMACFG_PEMODE	0x00000100	/* packet engine mode */
+#define	SAFE_PE_DMACFG_SAPREC	0x00000200	/* SA precedes packet */
+#define	SAFE_PE_DMACFG_PKFOLL	0x00000400	/* packet follows descriptor */
+#define	SAFE_PE_DMACFG_GPRBID	0x00003000	/* gather particle ring busid */
+#define	SAFE_PE_DMACFG_GPRPCI	0x00001000	/* PCI gather particle ring */
+#define	SAFE_PE_DMACFG_SPRBID	0x0000c000	/* scatter part. ring busid */
+#define	SAFE_PE_DMACFG_SPRPCI	0x00004000	/* PCI scatter part. ring */
+#define	SAFE_PE_DMACFG_ESDESC	0x00010000	/* endian swap descriptors */
+#define	SAFE_PE_DMACFG_ESSA	0x00020000	/* endian swap SA data */
+#define	SAFE_PE_DMACFG_ESPACKET	0x00040000	/* endian swap packet data */
+#define	SAFE_PE_DMACFG_ESPDESC	0x00080000	/* endian swap particle desc. */
+#define	SAFE_PE_DMACFG_NOPDRUP	0x00100000	/* supp. PDR ownership update */
+#define	SAFE_PD_EDMACFG_PCIMODE	0x01000000	/* PCI target mode */
+
+#define	SAFE_PE_DMASTAT_PEIDONE	0x00000001	/* PE core input done */
+#define	SAFE_PE_DMASTAT_PEODONE	0x00000002	/* PE core output done */
+#define	SAFE_PE_DMASTAT_ENCDONE	0x00000004	/* encryption done */
+#define	SAFE_PE_DMASTAT_IHDONE	0x00000008	/* inner hash done */
+#define	SAFE_PE_DMASTAT_OHDONE	0x00000010	/* outer hash (HMAC) done */
+#define	SAFE_PE_DMASTAT_PADFLT	0x00000020	/* crypto pad fault */
+#define	SAFE_PE_DMASTAT_ICVFLT	0x00000040	/* ICV fault */
+#define	SAFE_PE_DMASTAT_SPIMIS	0x00000080	/* SPI mismatch */
+#define	SAFE_PE_DMASTAT_CRYPTO	0x00000100	/* crypto engine timeout */
+#define	SAFE_PE_DMASTAT_CQACT	0x00000200	/* command queue active */
+#define	SAFE_PE_DMASTAT_IRACT	0x00000400	/* input request active */
+#define	SAFE_PE_DMASTAT_ORACT	0x00000800	/* output request active */
+#define	SAFE_PE_DMASTAT_PEISIZE	0x003ff000	/* PE input size:32-bit words */
+#define	SAFE_PE_DMASTAT_PEOSIZE	0xffc00000	/* PE out. size:32-bit words */
+
+#define	SAFE_PE_RINGCFG_SIZE	0x000003ff	/* ring size (descriptors) */
+#define	SAFE_PE_RINGCFG_OFFSET	0xffff0000	/* offset btw desc's (dwords) */
+#define	SAFE_PE_RINGCFG_OFFSET_S	16
+
+#define	SAFE_PE_RINGPOLL_POLL	0x00000fff	/* polling frequency/divisor */
+#define	SAFE_PE_RINGPOLL_RETRY	0x03ff0000	/* polling frequency/divisor */
+#define	SAFE_PE_RINGPOLL_CONT	0x80000000	/* continuously poll */
+
+#define	SAFE_PE_IRNGSTAT_CQAVAIL 0x00000001	/* command queue available */
+
+#define	SAFE_PE_ERNGSTAT_NEXT	0x03ff0000	/* index of next packet desc. */
+#define	SAFE_PE_ERNGSTAT_NEXT_S	16
+
+#define	SAFE_PE_IOTHRESH_INPUT	0x000003ff	/* input threshold (dwords) */
+#define	SAFE_PE_IOTHRESH_OUTPUT	0x03ff0000	/* output threshold (dwords) */
+
+#define	SAFE_PE_PARTCFG_SIZE	0x0000ffff	/* scatter particle size */
+#define	SAFE_PE_PARTCFG_GBURST	0x00030000	/* gather particle burst */
+#define	SAFE_PE_PARTCFG_GBURST_2	0x00000000
+#define	SAFE_PE_PARTCFG_GBURST_4	0x00010000
+#define	SAFE_PE_PARTCFG_GBURST_8	0x00020000
+#define	SAFE_PE_PARTCFG_GBURST_16	0x00030000
+#define	SAFE_PE_PARTCFG_SBURST	0x000c0000	/* scatter particle burst */
+#define	SAFE_PE_PARTCFG_SBURST_2	0x00000000
+#define	SAFE_PE_PARTCFG_SBURST_4	0x00040000
+#define	SAFE_PE_PARTCFG_SBURST_8	0x00080000
+#define	SAFE_PE_PARTCFG_SBURST_16	0x000c0000
+
+#define	SAFE_PE_PARTSIZE_SCAT	0xffff0000	/* scatter particle ring size */
+#define	SAFE_PE_PARTSIZE_GATH	0x0000ffff	/* gather particle ring size */
+
+#define	SAFE_CRYPTO_CTRL_3DES	0x00000001	/* enable 3DES support */
+#define	SAFE_CRYPTO_CTRL_PKEY	0x00010000	/* enable public key support */
+#define	SAFE_CRYPTO_CTRL_RNG	0x00020000	/* enable RNG support */
+
+#define	SAFE_DEVINFO_REV_MIN	0x0000000f	/* minor rev for chip */
+#define	SAFE_DEVINFO_REV_MAJ	0x000000f0	/* major rev for chip */
+#define	SAFE_DEVINFO_REV_MAJ_S	4
+#define	SAFE_DEVINFO_DES	0x00000100	/* DES/3DES support present */
+#define	SAFE_DEVINFO_ARC4	0x00000200	/* ARC4 support present */
+#define	SAFE_DEVINFO_AES	0x00000400	/* AES support present */
+#define	SAFE_DEVINFO_MD5	0x00001000	/* MD5 support present */
+#define	SAFE_DEVINFO_SHA1	0x00002000	/* SHA-1 support present */
+#define	SAFE_DEVINFO_RIPEMD	0x00004000	/* RIPEMD support present */
+#define	SAFE_DEVINFO_DEFLATE	0x00010000	/* Deflate support present */
+#define	SAFE_DEVINFO_SARAM	0x00100000	/* on-chip SA RAM present */
+#define	SAFE_DEVINFO_EMIBUS	0x00200000	/* EMI bus present */
+#define	SAFE_DEVINFO_PKEY	0x00400000	/* public key support present */
+#define	SAFE_DEVINFO_RNG	0x00800000	/* RNG present */
+
+#define	SAFE_REV(_maj, _min)	(((_maj) << SAFE_DEVINFO_REV_MAJ_S) | (_min))
+#define	SAFE_REV_MAJ(_chiprev) \
+	(((_chiprev) & SAFE_DEVINFO_REV_MAJ) >> SAFE_DEVINFO_REV_MAJ_S)
+#define	SAFE_REV_MIN(_chiprev)	((_chiprev) & SAFE_DEVINFO_REV_MIN)
+
+#define	SAFE_PK_FUNC_MULT	0x00000001	/* Multiply function */
+#define	SAFE_PK_FUNC_SQUARE	0x00000004	/* Square function */
+#define	SAFE_PK_FUNC_ADD	0x00000010	/* Add function */
+#define	SAFE_PK_FUNC_SUB	0x00000020	/* Subtract function */
+#define	SAFE_PK_FUNC_LSHIFT	0x00000040	/* Left-shift function */
+#define	SAFE_PK_FUNC_RSHIFT	0x00000080	/* Right-shift function */
+#define	SAFE_PK_FUNC_DIV	0x00000100	/* Divide function */
+#define	SAFE_PK_FUNC_CMP	0x00000400	/* Compare function */
+#define	SAFE_PK_FUNC_COPY	0x00000800	/* Copy function */
+#define	SAFE_PK_FUNC_EXP16	0x00002000	/* Exponentiate (4-bit ACT) */
+#define	SAFE_PK_FUNC_EXP4	0x00004000	/* Exponentiate (2-bit ACT) */
+#define	SAFE_PK_FUNC_RUN	0x00008000	/* start/status */
+
+#define	SAFE_RNG_STAT_BUSY	0x00000001	/* busy, data not valid */
+
+#define	SAFE_RNG_CTRL_PRE_LFSR	0x00000001	/* enable output pre-LFSR */
+#define	SAFE_RNG_CTRL_TST_MODE	0x00000002	/* enable test mode */
+#define	SAFE_RNG_CTRL_TST_RUN	0x00000004	/* start test state machine */
+#define	SAFE_RNG_CTRL_ENA_RING1	0x00000008	/* test entropy oscillator #1 */
+#define	SAFE_RNG_CTRL_ENA_RING2	0x00000010	/* test entropy oscillator #2 */
+#define	SAFE_RNG_CTRL_DIS_ALARM	0x00000020	/* disable RNG alarm reports */
+#define	SAFE_RNG_CTRL_TST_CLOCK	0x00000040	/* enable test clock */
+#define	SAFE_RNG_CTRL_SHORTEN	0x00000080	/* shorten state timers */
+#define	SAFE_RNG_CTRL_TST_ALARM	0x00000100	/* simulate alarm state */
+#define	SAFE_RNG_CTRL_RST_LFSR	0x00000200	/* reset LFSR */
+
+/*
+ * Packet engine descriptor.  Note that d_csr is a copy of the
+ * SAFE_PE_CSR register and all definitions apply, and d_len
+ * is a copy of the SAFE_PE_LEN register and all definitions apply.
+ * d_src and d_len may point directly to contiguous data or to a
+ * list of ``particle descriptors'' when using scatter/gather i/o.
+ */
+struct safe_desc {
+	u_int32_t	d_csr;			/* per-packet control/status */
+	u_int32_t	d_src;			/* source address */
+	u_int32_t	d_dst;			/* destination address */
+	u_int32_t	d_sa;			/* SA address */
+	u_int32_t	d_len;			/* length, bypass, status */
+};
+
+/*
+ * Scatter/Gather particle descriptor.
+ *
+ * NB: scatter descriptors do not specify a size; this is fixed
+ *     by the setting of the SAFE_PE_PARTCFG register.
+ */
+struct safe_pdesc {
+	u_int32_t	pd_addr;		/* particle address */
+#ifdef __BIG_ENDIAN
+	u_int16_t	pd_flags;		/* control word */
+	u_int16_t	pd_size;		/* particle size (bytes) */
+#else
+	u_int16_t	pd_flags;		/* control word */
+	u_int16_t	pd_size;		/* particle size (bytes) */
+#endif
+};
+
+#define	SAFE_PD_READY	0x0001			/* ready for processing */
+#define	SAFE_PD_DONE	0x0002			/* h/w completed processing */
+
+/*
+ * Security Association (SA) Record (Rev 1).  One of these is
+ * required for each operation processed by the packet engine.
+ */
+struct safe_sarec {
+	u_int32_t	sa_cmd0;
+	u_int32_t	sa_cmd1;
+	u_int32_t	sa_resv0;
+	u_int32_t	sa_resv1;
+	u_int32_t	sa_key[8];		/* DES/3DES/AES key */
+	u_int32_t	sa_indigest[5];		/* inner digest */
+	u_int32_t	sa_outdigest[5];	/* outer digest */
+	u_int32_t	sa_spi;			/* SPI */
+	u_int32_t	sa_seqnum;		/* sequence number */
+	u_int32_t	sa_seqmask[2];		/* sequence number mask */
+	u_int32_t	sa_resv2;
+	u_int32_t	sa_staterec;		/* address of state record */
+	u_int32_t	sa_resv3[2];
+	u_int32_t	sa_samgmt0;		/* SA management field 0 */
+	u_int32_t	sa_samgmt1;		/* SA management field 0 */
+};
+
+#define	SAFE_SA_CMD0_OP		0x00000007	/* operation code */
+#define	SAFE_SA_CMD0_OP_CRYPT	0x00000000	/* encrypt/decrypt (basic) */
+#define	SAFE_SA_CMD0_OP_BOTH	0x00000001	/* encrypt-hash/hash-decrypto */
+#define	SAFE_SA_CMD0_OP_HASH	0x00000003	/* hash (outbound-only) */
+#define	SAFE_SA_CMD0_OP_ESP	0x00000000	/* ESP in/out (proto) */
+#define	SAFE_SA_CMD0_OP_AH	0x00000001	/* AH in/out (proto) */
+#define	SAFE_SA_CMD0_INBOUND	0x00000008	/* inbound operation */
+#define	SAFE_SA_CMD0_OUTBOUND	0x00000000	/* outbound operation */
+#define	SAFE_SA_CMD0_GROUP	0x00000030	/* operation group */
+#define	SAFE_SA_CMD0_BASIC	0x00000000	/* basic operation */
+#define	SAFE_SA_CMD0_PROTO	0x00000010	/* protocol/packet operation */
+#define	SAFE_SA_CMD0_BUNDLE	0x00000020	/* bundled operation (resvd) */
+#define	SAFE_SA_CMD0_PAD	0x000000c0	/* crypto pad method */
+#define	SAFE_SA_CMD0_PAD_IPSEC	0x00000000	/* IPsec padding */
+#define	SAFE_SA_CMD0_PAD_PKCS7	0x00000040	/* PKCS#7 padding */
+#define	SAFE_SA_CMD0_PAD_CONS	0x00000080	/* constant padding */
+#define	SAFE_SA_CMD0_PAD_ZERO	0x000000c0	/* zero padding */
+#define	SAFE_SA_CMD0_CRYPT_ALG	0x00000f00	/* symmetric crypto algorithm */
+#define	SAFE_SA_CMD0_DES	0x00000000	/* DES crypto algorithm */
+#define	SAFE_SA_CMD0_3DES	0x00000100	/* 3DES crypto algorithm */
+#define	SAFE_SA_CMD0_AES	0x00000300	/* AES crypto algorithm */
+#define	SAFE_SA_CMD0_CRYPT_NULL	0x00000f00	/* null crypto algorithm */
+#define	SAFE_SA_CMD0_HASH_ALG	0x0000f000	/* hash algorithm */
+#define	SAFE_SA_CMD0_MD5	0x00000000	/* MD5 hash algorithm */
+#define	SAFE_SA_CMD0_SHA1	0x00001000	/* SHA-1 hash algorithm */
+#define	SAFE_SA_CMD0_HASH_NULL	0x0000f000	/* null hash algorithm */
+#define	SAFE_SA_CMD0_HDR_PROC	0x00080000	/* header processing */
+#define	SAFE_SA_CMD0_IBUSID	0x00300000	/* input bus id */
+#define	SAFE_SA_CMD0_IPCI	0x00100000	/* PCI input bus id */
+#define	SAFE_SA_CMD0_OBUSID	0x00c00000	/* output bus id */
+#define	SAFE_SA_CMD0_OPCI	0x00400000	/* PCI output bus id */
+#define	SAFE_SA_CMD0_IVLD	0x03000000	/* IV loading */
+#define	SAFE_SA_CMD0_IVLD_NONE	0x00000000	/* IV no load (reuse) */
+#define	SAFE_SA_CMD0_IVLD_IBUF	0x01000000	/* IV load from input buffer */
+#define	SAFE_SA_CMD0_IVLD_STATE	0x02000000	/* IV load from state */
+#define	SAFE_SA_CMD0_HSLD	0x0c000000	/* hash state loading */
+#define	SAFE_SA_CMD0_HSLD_SA	0x00000000	/* hash state load from SA */
+#define	SAFE_SA_CMD0_HSLD_STATE	0x08000000	/* hash state load from state */
+#define	SAFE_SA_CMD0_HSLD_NONE	0x0c000000	/* hash state no load */
+#define	SAFE_SA_CMD0_SAVEIV	0x10000000	/* save IV */
+#define	SAFE_SA_CMD0_SAVEHASH	0x20000000	/* save hash state */
+#define	SAFE_SA_CMD0_IGATHER	0x40000000	/* input gather */
+#define	SAFE_SA_CMD0_OSCATTER	0x80000000	/* output scatter */
+
+#define	SAFE_SA_CMD1_HDRCOPY	0x00000002	/* copy header to output */
+#define	SAFE_SA_CMD1_PAYCOPY	0x00000004	/* copy payload to output */
+#define	SAFE_SA_CMD1_PADCOPY	0x00000008	/* copy pad to output */
+#define	SAFE_SA_CMD1_IPV4	0x00000000	/* IPv4 protocol */
+#define	SAFE_SA_CMD1_IPV6	0x00000010	/* IPv6 protocol */
+#define	SAFE_SA_CMD1_MUTABLE	0x00000020	/* mutable bit processing */
+#define	SAFE_SA_CMD1_SRBUSID	0x000000c0	/* state record bus id */
+#define	SAFE_SA_CMD1_SRPCI	0x00000040	/* state record from PCI */
+#define	SAFE_SA_CMD1_CRMODE	0x00000300	/* crypto mode */
+#define	SAFE_SA_CMD1_ECB	0x00000000	/* ECB crypto mode */
+#define	SAFE_SA_CMD1_CBC	0x00000100	/* CBC crypto mode */
+#define	SAFE_SA_CMD1_OFB	0x00000200	/* OFB crypto mode */
+#define	SAFE_SA_CMD1_CFB	0x00000300	/* CFB crypto mode */
+#define	SAFE_SA_CMD1_CRFEEDBACK	0x00000c00	/* crypto feedback mode */
+#define	SAFE_SA_CMD1_64BIT	0x00000000	/* 64-bit crypto feedback */
+#define	SAFE_SA_CMD1_8BIT	0x00000400	/* 8-bit crypto feedback */
+#define	SAFE_SA_CMD1_1BIT	0x00000800	/* 1-bit crypto feedback */
+#define	SAFE_SA_CMD1_128BIT	0x00000c00	/* 128-bit crypto feedback */
+#define	SAFE_SA_CMD1_OPTIONS	0x00001000	/* HMAC/options mutable bit */
+#define	SAFE_SA_CMD1_HMAC	SAFE_SA_CMD1_OPTIONS
+#define	SAFE_SA_CMD1_SAREV1	0x00008000	/* SA Revision 1 */
+#define	SAFE_SA_CMD1_OFFSET	0x00ff0000	/* hash/crypto offset(dwords) */
+#define	SAFE_SA_CMD1_OFFSET_S	16
+#define	SAFE_SA_CMD1_AESKEYLEN	0x0f000000	/* AES key length */
+#define	SAFE_SA_CMD1_AES128	0x02000000	/* 128-bit AES key */
+#define	SAFE_SA_CMD1_AES192	0x03000000	/* 192-bit AES key */
+#define	SAFE_SA_CMD1_AES256	0x04000000	/* 256-bit AES key */
+
+/* 
+ * Security Associate State Record (Rev 1).
+ */
+struct safe_sastate {
+	u_int32_t	sa_saved_iv[4];		/* saved IV (DES/3DES/AES) */
+	u_int32_t	sa_saved_hashbc;	/* saved hash byte count */
+	u_int32_t	sa_saved_indigest[5];	/* saved inner digest */
+};
+#endif /* _SAFE_SAFEREG_H_ */
diff --git a/target/linux/generic/files/crypto/ocf/safe/safevar.h b/target/linux/generic/files/crypto/ocf/safe/safevar.h
new file mode 100644
index 0000000000..9039a5d31b
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/safe/safevar.h
@@ -0,0 +1,230 @@
+/*-
+ * The linux port of this code done by David McCullough
+ * Copyright (C) 2004-2010 David McCullough <david_mccullough@mcafee.com>
+ * The license and original author are listed below.
+ *
+ * Copyright (c) 2003 Sam Leffler, Errno Consulting
+ * Copyright (c) 2003 Global Technology Associates, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $FreeBSD: src/sys/dev/safe/safevar.h,v 1.2 2006/05/17 18:34:26 pjd Exp $
+ */
+#ifndef _SAFE_SAFEVAR_H_
+#define	_SAFE_SAFEVAR_H_
+
+/* Maximum queue length */
+#ifndef SAFE_MAX_NQUEUE
+#define SAFE_MAX_NQUEUE	60
+#endif
+
+#define	SAFE_MAX_PART		64	/* Maximum scatter/gather depth */
+#define	SAFE_DMA_BOUNDARY	0	/* No boundary for source DMA ops */
+#define	SAFE_MAX_DSIZE		2048 /* MCLBYTES Fixed scatter particle size */
+#define	SAFE_MAX_SSIZE		0x0ffff	/* Maximum gather particle size */
+#define	SAFE_MAX_DMA		0xfffff	/* Maximum PE operand size (20 bits) */
+/* total src+dst particle descriptors */
+#define	SAFE_TOTAL_DPART	(SAFE_MAX_NQUEUE * SAFE_MAX_PART)
+#define	SAFE_TOTAL_SPART	(SAFE_MAX_NQUEUE * SAFE_MAX_PART)
+
+#define	SAFE_RNG_MAXBUFSIZ	128	/* 32-bit words */
+
+#define	SAFE_CARD(sid)		(((sid) & 0xf0000000) >> 28)
+#define	SAFE_SESSION(sid)	( (sid) & 0x0fffffff)
+#define	SAFE_SID(crd, sesn)	(((crd) << 28) | ((sesn) & 0x0fffffff))
+
+#define SAFE_DEF_RTY		0xff	/* PCI Retry Timeout */
+#define SAFE_DEF_TOUT		0xff	/* PCI TRDY Timeout */
+#define SAFE_DEF_CACHELINE	0x01	/* Cache Line setting */
+
+#ifdef __KERNEL__
+/*
+ * State associated with the allocation of each chunk
+ * of memory setup for DMA.
+ */
+struct safe_dma_alloc {
+	dma_addr_t		dma_paddr;
+	void			*dma_vaddr;
+};
+
+/*
+ * Cryptographic operand state.  One of these exists for each
+ * source and destination operand passed in from the crypto
+ * subsystem.  When possible source and destination operands
+ * refer to the same memory.  More often they are distinct.
+ * We track the virtual address of each operand as well as
+ * where each is mapped for DMA.
+ */
+struct safe_operand {
+	union {
+		struct sk_buff *skb;
+		struct uio *io;
+	} u;
+	void			*map;
+	int				mapsize;	/* total number of bytes in segs */
+	struct {
+		dma_addr_t	ds_addr;
+		int			ds_len;
+		int			ds_tlen;
+	} segs[SAFE_MAX_PART];
+	int				nsegs;
+};
+
+/*
+ * Packet engine ring entry and cryptographic operation state.
+ * The packet engine requires a ring of descriptors that contain
+ * pointers to various cryptographic state.  However the ring
+ * configuration register allows you to specify an arbitrary size
+ * for ring entries.  We use this feature to collect most of the
+ * state for each cryptographic request into one spot.  Other than
+ * ring entries only the ``particle descriptors'' (scatter/gather
+ * lists) and the actual operand data are kept separate.  The
+ * particle descriptors must also be organized in rings.  The
+ * operand data can be located aribtrarily (modulo alignment constraints).
+ *
+ * Note that the descriptor ring is mapped onto the PCI bus so
+ * the hardware can DMA data.  This means the entire ring must be
+ * contiguous.
+ */
+struct safe_ringentry {
+	struct safe_desc	re_desc;	/* command descriptor */
+	struct safe_sarec	re_sa;		/* SA record */
+	struct safe_sastate	re_sastate;	/* SA state record */
+
+	struct cryptop		*re_crp;	/* crypto operation */
+
+	struct safe_operand	re_src;		/* source operand */
+	struct safe_operand	re_dst;		/* destination operand */
+
+	int			re_sesn;	/* crypto session ID */
+	int			re_flags;
+#define	SAFE_QFLAGS_COPYOUTIV	0x1		/* copy back on completion */
+#define	SAFE_QFLAGS_COPYOUTICV	0x2		/* copy back on completion */
+};
+
+#define	re_src_skb	re_src.u.skb
+#define	re_src_io	re_src.u.io
+#define	re_src_map	re_src.map
+#define	re_src_nsegs	re_src.nsegs
+#define	re_src_segs	re_src.segs
+#define	re_src_mapsize	re_src.mapsize
+
+#define	re_dst_skb	re_dst.u.skb
+#define	re_dst_io	re_dst.u.io
+#define	re_dst_map	re_dst.map
+#define	re_dst_nsegs	re_dst.nsegs
+#define	re_dst_segs	re_dst.segs
+#define	re_dst_mapsize	re_dst.mapsize
+
+struct rndstate_test;
+
+struct safe_session {
+	u_int32_t	ses_used;
+	u_int32_t	ses_klen;		/* key length in bits */
+	u_int32_t	ses_key[8];		/* DES/3DES/AES key */
+	u_int32_t	ses_mlen;		/* hmac length in bytes */
+	u_int32_t	ses_hminner[5];		/* hmac inner state */
+	u_int32_t	ses_hmouter[5];		/* hmac outer state */
+	u_int32_t	ses_iv[4];		/* DES/3DES/AES iv */
+};
+
+struct safe_pkq {
+	struct list_head	pkq_list;
+	struct cryptkop		*pkq_krp;
+};
+
+struct safe_softc {
+	softc_device_decl	sc_dev;
+	u32			sc_irq;
+
+	struct pci_dev		*sc_pcidev;
+	ocf_iomem_t		sc_base_addr;
+
+	u_int			sc_chiprev;	/* major/minor chip revision */
+	int			sc_flags;	/* device specific flags */
+#define	SAFE_FLAGS_KEY		0x01		/* has key accelerator */
+#define	SAFE_FLAGS_RNG		0x02		/* hardware rng */
+	int			sc_suspended;
+	int			sc_needwakeup;	/* notify crypto layer */
+	int32_t			sc_cid;		/* crypto tag */
+
+	struct safe_dma_alloc	sc_ringalloc;	/* PE ring allocation state */
+	struct safe_ringentry	*sc_ring;	/* PE ring */
+	struct safe_ringentry	*sc_ringtop;	/* PE ring top */
+	struct safe_ringentry	*sc_front;	/* next free entry */
+	struct safe_ringentry	*sc_back;	/* next pending entry */
+	int			sc_nqchip;	/* # passed to chip */
+	spinlock_t		sc_ringmtx;	/* PE ring lock */
+	struct safe_pdesc	*sc_spring;	/* src particle ring */
+	struct safe_pdesc	*sc_springtop;	/* src particle ring top */
+	struct safe_pdesc	*sc_spfree;	/* next free src particle */
+	struct safe_dma_alloc	sc_spalloc;	/* src particle ring state */
+	struct safe_pdesc	*sc_dpring;	/* dest particle ring */
+	struct safe_pdesc	*sc_dpringtop;	/* dest particle ring top */
+	struct safe_pdesc	*sc_dpfree;	/* next free dest particle */
+	struct safe_dma_alloc	sc_dpalloc;	/* dst particle ring state */
+	int			sc_nsessions;	/* # of sessions */
+	struct safe_session	*sc_sessions;	/* sessions */
+
+	struct timer_list	sc_pkto;	/* PK polling */
+	spinlock_t		sc_pkmtx;	/* PK lock */
+	struct list_head	sc_pkq;		/* queue of PK requests */
+	struct safe_pkq		*sc_pkq_cur;	/* current processing request */
+	u_int32_t		sc_pk_reslen, sc_pk_resoff;
+
+	int			sc_max_dsize;	/* maximum safe DMA size */
+};
+#endif /* __KERNEL__ */
+
+struct safe_stats {
+	u_int64_t st_ibytes;
+	u_int64_t st_obytes;
+	u_int32_t st_ipackets;
+	u_int32_t st_opackets;
+	u_int32_t st_invalid;		/* invalid argument */
+	u_int32_t st_badsession;	/* invalid session id */
+	u_int32_t st_badflags;		/* flags indicate !(mbuf | uio) */
+	u_int32_t st_nodesc;		/* op submitted w/o descriptors */
+	u_int32_t st_badalg;		/* unsupported algorithm */
+	u_int32_t st_ringfull;		/* PE descriptor ring full */
+	u_int32_t st_peoperr;		/* PE marked error */
+	u_int32_t st_dmaerr;		/* PE DMA error */
+	u_int32_t st_bypasstoobig;	/* bypass > 96 bytes */
+	u_int32_t st_skipmismatch;	/* enc part begins before auth part */
+	u_int32_t st_lenmismatch;	/* enc length different auth length */
+	u_int32_t st_coffmisaligned;	/* crypto offset not 32-bit aligned */
+	u_int32_t st_cofftoobig;	/* crypto offset > 255 words */
+	u_int32_t st_iovmisaligned;	/* iov op not aligned */
+	u_int32_t st_iovnotuniform;	/* iov op not suitable */
+	u_int32_t st_unaligned;		/* unaligned src caused copy */
+	u_int32_t st_notuniform;	/* non-uniform src caused copy */
+	u_int32_t st_nomap;		/* bus_dmamap_create failed */
+	u_int32_t st_noload;		/* bus_dmamap_load_* failed */
+	u_int32_t st_nombuf;		/* MGET* failed */
+	u_int32_t st_nomcl;		/* MCLGET* failed */
+	u_int32_t st_maxqchip;		/* max mcr1 ops out for processing */
+	u_int32_t st_rng;		/* RNG requests */
+	u_int32_t st_rngalarm;		/* RNG alarm requests */
+	u_int32_t st_noicvcopy;		/* ICV data copies suppressed */
+};
+#endif /* _SAFE_SAFEVAR_H_ */
diff --git a/target/linux/generic/files/crypto/ocf/safe/sha1.c b/target/linux/generic/files/crypto/ocf/safe/sha1.c
new file mode 100644
index 0000000000..4e360e20db
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/safe/sha1.c
@@ -0,0 +1,279 @@
+/*	$KAME: sha1.c,v 1.5 2000/11/08 06:13:08 itojun Exp $	*/
+/*
+ * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the project nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/*
+ * FIPS pub 180-1: Secure Hash Algorithm (SHA-1)
+ * based on: http://csrc.nist.gov/fips/fip180-1.txt
+ * implemented by Jun-ichiro itojun Itoh <itojun@itojun.org>
+ */
+
+#if 0
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD: src/sys/crypto/sha1.c,v 1.9 2003/06/10 21:36:57 obrien Exp $");
+
+#include <sys/types.h>
+#include <sys/cdefs.h>
+#include <sys/time.h>
+#include <sys/systm.h>
+
+#include <crypto/sha1.h>
+#endif
+
+/* sanity check */
+#if BYTE_ORDER != BIG_ENDIAN
+# if BYTE_ORDER != LITTLE_ENDIAN
+#  define unsupported 1
+# endif
+#endif
+
+#ifndef unsupported
+
+/* constant table */
+static u_int32_t _K[] = { 0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6 };
+#define	K(t)	_K[(t) / 20]
+
+#define	F0(b, c, d)	(((b) & (c)) | ((~(b)) & (d)))
+#define	F1(b, c, d)	(((b) ^ (c)) ^ (d))
+#define	F2(b, c, d)	(((b) & (c)) | ((b) & (d)) | ((c) & (d)))
+#define	F3(b, c, d)	(((b) ^ (c)) ^ (d))
+
+#define	S(n, x)		(((x) << (n)) | ((x) >> (32 - n)))
+
+#undef H
+#define	H(n)	(ctxt->h.b32[(n)])
+#define	COUNT	(ctxt->count)
+#define	BCOUNT	(ctxt->c.b64[0] / 8)
+#define	W(n)	(ctxt->m.b32[(n)])
+
+#define	PUTBYTE(x)	{ \
+	ctxt->m.b8[(COUNT % 64)] = (x);		\
+	COUNT++;				\
+	COUNT %= 64;				\
+	ctxt->c.b64[0] += 8;			\
+	if (COUNT % 64 == 0)			\
+		sha1_step(ctxt);		\
+     }
+
+#define	PUTPAD(x)	{ \
+	ctxt->m.b8[(COUNT % 64)] = (x);		\
+	COUNT++;				\
+	COUNT %= 64;				\
+	if (COUNT % 64 == 0)			\
+		sha1_step(ctxt);		\
+     }
+
+static void sha1_step(struct sha1_ctxt *);
+
+static void
+sha1_step(ctxt)
+	struct sha1_ctxt *ctxt;
+{
+	u_int32_t	a, b, c, d, e;
+	size_t t, s;
+	u_int32_t	tmp;
+
+#if BYTE_ORDER == LITTLE_ENDIAN
+	struct sha1_ctxt tctxt;
+	bcopy(&ctxt->m.b8[0], &tctxt.m.b8[0], 64);
+	ctxt->m.b8[0] = tctxt.m.b8[3]; ctxt->m.b8[1] = tctxt.m.b8[2];
+	ctxt->m.b8[2] = tctxt.m.b8[1]; ctxt->m.b8[3] = tctxt.m.b8[0];
+	ctxt->m.b8[4] = tctxt.m.b8[7]; ctxt->m.b8[5] = tctxt.m.b8[6];
+	ctxt->m.b8[6] = tctxt.m.b8[5]; ctxt->m.b8[7] = tctxt.m.b8[4];
+	ctxt->m.b8[8] = tctxt.m.b8[11]; ctxt->m.b8[9] = tctxt.m.b8[10];
+	ctxt->m.b8[10] = tctxt.m.b8[9]; ctxt->m.b8[11] = tctxt.m.b8[8];
+	ctxt->m.b8[12] = tctxt.m.b8[15]; ctxt->m.b8[13] = tctxt.m.b8[14];
+	ctxt->m.b8[14] = tctxt.m.b8[13]; ctxt->m.b8[15] = tctxt.m.b8[12];
+	ctxt->m.b8[16] = tctxt.m.b8[19]; ctxt->m.b8[17] = tctxt.m.b8[18];
+	ctxt->m.b8[18] = tctxt.m.b8[17]; ctxt->m.b8[19] = tctxt.m.b8[16];
+	ctxt->m.b8[20] = tctxt.m.b8[23]; ctxt->m.b8[21] = tctxt.m.b8[22];
+	ctxt->m.b8[22] = tctxt.m.b8[21]; ctxt->m.b8[23] = tctxt.m.b8[20];
+	ctxt->m.b8[24] = tctxt.m.b8[27]; ctxt->m.b8[25] = tctxt.m.b8[26];
+	ctxt->m.b8[26] = tctxt.m.b8[25]; ctxt->m.b8[27] = tctxt.m.b8[24];
+	ctxt->m.b8[28] = tctxt.m.b8[31]; ctxt->m.b8[29] = tctxt.m.b8[30];
+	ctxt->m.b8[30] = tctxt.m.b8[29]; ctxt->m.b8[31] = tctxt.m.b8[28];
+	ctxt->m.b8[32] = tctxt.m.b8[35]; ctxt->m.b8[33] = tctxt.m.b8[34];
+	ctxt->m.b8[34] = tctxt.m.b8[33]; ctxt->m.b8[35] = tctxt.m.b8[32];
+	ctxt->m.b8[36] = tctxt.m.b8[39]; ctxt->m.b8[37] = tctxt.m.b8[38];
+	ctxt->m.b8[38] = tctxt.m.b8[37]; ctxt->m.b8[39] = tctxt.m.b8[36];
+	ctxt->m.b8[40] = tctxt.m.b8[43]; ctxt->m.b8[41] = tctxt.m.b8[42];
+	ctxt->m.b8[42] = tctxt.m.b8[41]; ctxt->m.b8[43] = tctxt.m.b8[40];
+	ctxt->m.b8[44] = tctxt.m.b8[47]; ctxt->m.b8[45] = tctxt.m.b8[46];
+	ctxt->m.b8[46] = tctxt.m.b8[45]; ctxt->m.b8[47] = tctxt.m.b8[44];
+	ctxt->m.b8[48] = tctxt.m.b8[51]; ctxt->m.b8[49] = tctxt.m.b8[50];
+	ctxt->m.b8[50] = tctxt.m.b8[49]; ctxt->m.b8[51] = tctxt.m.b8[48];
+	ctxt->m.b8[52] = tctxt.m.b8[55]; ctxt->m.b8[53] = tctxt.m.b8[54];
+	ctxt->m.b8[54] = tctxt.m.b8[53]; ctxt->m.b8[55] = tctxt.m.b8[52];
+	ctxt->m.b8[56] = tctxt.m.b8[59]; ctxt->m.b8[57] = tctxt.m.b8[58];
+	ctxt->m.b8[58] = tctxt.m.b8[57]; ctxt->m.b8[59] = tctxt.m.b8[56];
+	ctxt->m.b8[60] = tctxt.m.b8[63]; ctxt->m.b8[61] = tctxt.m.b8[62];
+	ctxt->m.b8[62] = tctxt.m.b8[61]; ctxt->m.b8[63] = tctxt.m.b8[60];
+#endif
+
+	a = H(0); b = H(1); c = H(2); d = H(3); e = H(4);
+
+	for (t = 0; t < 20; t++) {
+		s = t & 0x0f;
+		if (t >= 16) {
+			W(s) = S(1, W((s+13) & 0x0f) ^ W((s+8) & 0x0f) ^ W((s+2) & 0x0f) ^ W(s));
+		}
+		tmp = S(5, a) + F0(b, c, d) + e + W(s) + K(t);
+		e = d; d = c; c = S(30, b); b = a; a = tmp;
+	}
+	for (t = 20; t < 40; t++) {
+		s = t & 0x0f;
+		W(s) = S(1, W((s+13) & 0x0f) ^ W((s+8) & 0x0f) ^ W((s+2) & 0x0f) ^ W(s));
+		tmp = S(5, a) + F1(b, c, d) + e + W(s) + K(t);
+		e = d; d = c; c = S(30, b); b = a; a = tmp;
+	}
+	for (t = 40; t < 60; t++) {
+		s = t & 0x0f;
+		W(s) = S(1, W((s+13) & 0x0f) ^ W((s+8) & 0x0f) ^ W((s+2) & 0x0f) ^ W(s));
+		tmp = S(5, a) + F2(b, c, d) + e + W(s) + K(t);
+		e = d; d = c; c = S(30, b); b = a; a = tmp;
+	}
+	for (t = 60; t < 80; t++) {
+		s = t & 0x0f;
+		W(s) = S(1, W((s+13) & 0x0f) ^ W((s+8) & 0x0f) ^ W((s+2) & 0x0f) ^ W(s));
+		tmp = S(5, a) + F3(b, c, d) + e + W(s) + K(t);
+		e = d; d = c; c = S(30, b); b = a; a = tmp;
+	}
+
+	H(0) = H(0) + a;
+	H(1) = H(1) + b;
+	H(2) = H(2) + c;
+	H(3) = H(3) + d;
+	H(4) = H(4) + e;
+
+	bzero(&ctxt->m.b8[0], 64);
+}
+
+/*------------------------------------------------------------*/
+
+void
+sha1_init(ctxt)
+	struct sha1_ctxt *ctxt;
+{
+	bzero(ctxt, sizeof(struct sha1_ctxt));
+	H(0) = 0x67452301;
+	H(1) = 0xefcdab89;
+	H(2) = 0x98badcfe;
+	H(3) = 0x10325476;
+	H(4) = 0xc3d2e1f0;
+}
+
+void
+sha1_pad(ctxt)
+	struct sha1_ctxt *ctxt;
+{
+	size_t padlen;		/*pad length in bytes*/
+	size_t padstart;
+
+	PUTPAD(0x80);
+
+	padstart = COUNT % 64;
+	padlen = 64 - padstart;
+	if (padlen < 8) {
+		bzero(&ctxt->m.b8[padstart], padlen);
+		COUNT += padlen;
+		COUNT %= 64;
+		sha1_step(ctxt);
+		padstart = COUNT % 64;	/* should be 0 */
+		padlen = 64 - padstart;	/* should be 64 */
+	}
+	bzero(&ctxt->m.b8[padstart], padlen - 8);
+	COUNT += (padlen - 8);
+	COUNT %= 64;
+#if BYTE_ORDER == BIG_ENDIAN
+	PUTPAD(ctxt->c.b8[0]); PUTPAD(ctxt->c.b8[1]);
+	PUTPAD(ctxt->c.b8[2]); PUTPAD(ctxt->c.b8[3]);
+	PUTPAD(ctxt->c.b8[4]); PUTPAD(ctxt->c.b8[5]);
+	PUTPAD(ctxt->c.b8[6]); PUTPAD(ctxt->c.b8[7]);
+#else
+	PUTPAD(ctxt->c.b8[7]); PUTPAD(ctxt->c.b8[6]);
+	PUTPAD(ctxt->c.b8[5]); PUTPAD(ctxt->c.b8[4]);
+	PUTPAD(ctxt->c.b8[3]); PUTPAD(ctxt->c.b8[2]);
+	PUTPAD(ctxt->c.b8[1]); PUTPAD(ctxt->c.b8[0]);
+#endif
+}
+
+void
+sha1_loop(ctxt, input, len)
+	struct sha1_ctxt *ctxt;
+	const u_int8_t *input;
+	size_t len;
+{
+	size_t gaplen;
+	size_t gapstart;
+	size_t off;
+	size_t copysiz;
+
+	off = 0;
+
+	while (off < len) {
+		gapstart = COUNT % 64;
+		gaplen = 64 - gapstart;
+
+		copysiz = (gaplen < len - off) ? gaplen : len - off;
+		bcopy(&input[off], &ctxt->m.b8[gapstart], copysiz);
+		COUNT += copysiz;
+		COUNT %= 64;
+		ctxt->c.b64[0] += copysiz * 8;
+		if (COUNT % 64 == 0)
+			sha1_step(ctxt);
+		off += copysiz;
+	}
+}
+
+void
+sha1_result(ctxt, digest0)
+	struct sha1_ctxt *ctxt;
+	caddr_t digest0;
+{
+	u_int8_t *digest;
+
+	digest = (u_int8_t *)digest0;
+	sha1_pad(ctxt);
+#if BYTE_ORDER == BIG_ENDIAN
+	bcopy(&ctxt->h.b8[0], digest, 20);
+#else
+	digest[0] = ctxt->h.b8[3]; digest[1] = ctxt->h.b8[2];
+	digest[2] = ctxt->h.b8[1]; digest[3] = ctxt->h.b8[0];
+	digest[4] = ctxt->h.b8[7]; digest[5] = ctxt->h.b8[6];
+	digest[6] = ctxt->h.b8[5]; digest[7] = ctxt->h.b8[4];
+	digest[8] = ctxt->h.b8[11]; digest[9] = ctxt->h.b8[10];
+	digest[10] = ctxt->h.b8[9]; digest[11] = ctxt->h.b8[8];
+	digest[12] = ctxt->h.b8[15]; digest[13] = ctxt->h.b8[14];
+	digest[14] = ctxt->h.b8[13]; digest[15] = ctxt->h.b8[12];
+	digest[16] = ctxt->h.b8[19]; digest[17] = ctxt->h.b8[18];
+	digest[18] = ctxt->h.b8[17]; digest[19] = ctxt->h.b8[16];
+#endif
+}
+
+#endif /*unsupported*/
diff --git a/target/linux/generic/files/crypto/ocf/safe/sha1.h b/target/linux/generic/files/crypto/ocf/safe/sha1.h
new file mode 100644
index 0000000000..0e19d9071f
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/safe/sha1.h
@@ -0,0 +1,72 @@
+/*	$FreeBSD: src/sys/crypto/sha1.h,v 1.8 2002/03/20 05:13:50 alfred Exp $	*/
+/*	$KAME: sha1.h,v 1.5 2000/03/27 04:36:23 sumikawa Exp $	*/
+
+/*
+ * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the project nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+/*
+ * FIPS pub 180-1: Secure Hash Algorithm (SHA-1)
+ * based on: http://csrc.nist.gov/fips/fip180-1.txt
+ * implemented by Jun-ichiro itojun Itoh <itojun@itojun.org>
+ */
+
+#ifndef _NETINET6_SHA1_H_
+#define _NETINET6_SHA1_H_
+
+struct sha1_ctxt {
+	union {
+		u_int8_t	b8[20];
+		u_int32_t	b32[5];
+	} h;
+	union {
+		u_int8_t	b8[8];
+		u_int64_t	b64[1];
+	} c;
+	union {
+		u_int8_t	b8[64];
+		u_int32_t	b32[16];
+	} m;
+	u_int8_t	count;
+};
+
+#ifdef __KERNEL__
+extern void sha1_init(struct sha1_ctxt *);
+extern void sha1_pad(struct sha1_ctxt *);
+extern void sha1_loop(struct sha1_ctxt *, const u_int8_t *, size_t);
+extern void sha1_result(struct sha1_ctxt *, caddr_t);
+
+/* compatibilty with other SHA1 source codes */
+typedef struct sha1_ctxt SHA1_CTX;
+#define SHA1Init(x)		sha1_init((x))
+#define SHA1Update(x, y, z)	sha1_loop((x), (y), (z))
+#define SHA1Final(x, y)		sha1_result((y), (x))
+#endif /* __KERNEL__ */
+
+#define	SHA1_RESULTLEN	(160/8)
+
+#endif /*_NETINET6_SHA1_H_*/
diff --git a/target/linux/generic/files/crypto/ocf/talitos/Makefile b/target/linux/generic/files/crypto/ocf/talitos/Makefile
new file mode 100644
index 0000000000..2591b8aef5
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/talitos/Makefile
@@ -0,0 +1,12 @@
+# for SGlinux builds
+-include $(ROOTDIR)/modules/.config
+
+obj-$(CONFIG_OCF_TALITOS) += talitos.o
+
+obj ?= .
+EXTRA_CFLAGS += -I$(obj)/.. -I$(obj)/
+
+ifdef TOPDIR
+-include $(TOPDIR)/Rules.make
+endif
+
diff --git a/target/linux/generic/files/crypto/ocf/talitos/talitos.c b/target/linux/generic/files/crypto/ocf/talitos/talitos.c
new file mode 100644
index 0000000000..94046343ef
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/talitos/talitos.c
@@ -0,0 +1,1359 @@
+/*
+ * crypto/ocf/talitos/talitos.c
+ *
+ * An OCF-Linux module that uses Freescale's SEC to do the crypto.
+ * Based on crypto/ocf/hifn and crypto/ocf/safe OCF drivers
+ *
+ * Copyright (c) 2006 Freescale Semiconductor, Inc.
+ *
+ * This code written by Kim A. B. Phillips <kim.phillips@freescale.com>
+ * some code copied from files with the following:
+ * Copyright (C) 2004-2007 David McCullough <david_mccullough@mcafee.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ---------------------------------------------------------------------------
+ *
+ * NOTES:
+ *
+ * The Freescale SEC (also known as 'talitos') resides on the
+ * internal bus, and runs asynchronous to the processor core.  It has
+ * a wide gamut of cryptographic acceleration features, including single-
+ * pass IPsec (also known as algorithm chaining).  To properly utilize 
+ * all of the SEC's performance enhancing features, further reworking 
+ * of higher level code (framework, applications) will be necessary.
+ *
+ * The following table shows which SEC version is present in which devices:
+ * 
+ * Devices       SEC version
+ *
+ * 8272, 8248    SEC 1.0
+ * 885, 875      SEC 1.2
+ * 8555E, 8541E  SEC 2.0
+ * 8349E         SEC 2.01
+ * 8548E         SEC 2.1
+ *
+ * The following table shows the features offered by each SEC version:
+ *
+ * 	                       Max.   chan-
+ * version  Bus I/F       Clock  nels  DEU AESU AFEU MDEU PKEU RNG KEU
+ *
+ * SEC 1.0  internal 64b  100MHz   4     1    1    1    1    1   1   0
+ * SEC 1.2  internal 32b   66MHz   1     1    1    0    1    0   0   0
+ * SEC 2.0  internal 64b  166MHz   4     1    1    1    1    1   1   0
+ * SEC 2.01 internal 64b  166MHz   4     1    1    1    1    1   1   0
+ * SEC 2.1  internal 64b  333MHz   4     1    1    1    1    1   1   1
+ *
+ * Each execution unit in the SEC has two modes of execution; channel and
+ * slave/debug.  This driver employs the channel infrastructure in the
+ * device for convenience.  Only the RNG is directly accessed due to the
+ * convenience of its random fifo pool.  The relationship between the
+ * channels and execution units is depicted in the following diagram:
+ *
+ *    -------   ------------
+ * ---| ch0 |---|          |
+ *    -------   |          |
+ *              |          |------+-------+-------+-------+------------
+ *    -------   |          |      |       |       |       |           |
+ * ---| ch1 |---|          |      |       |       |       |           |
+ *    -------   |          |   ------  ------  ------  ------      ------
+ *              |controller|   |DEU |  |AESU|  |MDEU|  |PKEU| ...  |RNG |
+ *    -------   |          |   ------  ------  ------  ------      ------
+ * ---| ch2 |---|          |      |       |       |       |           |
+ *    -------   |          |      |       |       |       |           |
+ *              |          |------+-------+-------+-------+------------
+ *    -------   |          |
+ * ---| ch3 |---|          |
+ *    -------   ------------
+ *
+ * Channel ch0 may drive an aes operation to the aes unit (AESU),
+ * and, at the same time, ch1 may drive a message digest operation
+ * to the mdeu. Each channel has an input descriptor FIFO, and the 
+ * FIFO can contain, e.g. on the 8541E, up to 24 entries, before a
+ * a buffer overrun error is triggered. The controller is responsible
+ * for fetching the data from descriptor pointers, and passing the 
+ * data to the appropriate EUs. The controller also writes the 
+ * cryptographic operation's result to memory. The SEC notifies 
+ * completion by triggering an interrupt and/or setting the 1st byte 
+ * of the hdr field to 0xff.
+ *
+ * TODO:
+ * o support more algorithms
+ * o support more versions of the SEC
+ * o add support for linux 2.4
+ * o scatter-gather (sg) support
+ * o add support for public key ops (PKEU)
+ * o add statistics
+ */
+
+#ifndef AUTOCONF_INCLUDED
+#include <linux/config.h>
+#endif
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/random.h>
+#include <linux/skbuff.h>
+#include <asm/scatterlist.h>
+#include <linux/dma-mapping.h>  /* dma_map_single() */
+#include <linux/moduleparam.h>
+
+#include <linux/version.h>
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,15)
+#include <linux/platform_device.h>
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19)
+#include <linux/of_platform.h>
+#endif
+
+#include <cryptodev.h>
+#include <uio.h>
+
+#define DRV_NAME "talitos" 
+
+#include "talitos_dev.h"
+#include "talitos_soft.h"
+
+#define read_random(p,l) get_random_bytes(p,l)
+
+const char talitos_driver_name[] = "Talitos OCF";
+const char talitos_driver_version[] = "0.2";
+
+static int talitos_newsession(device_t dev, u_int32_t *sidp,
+								struct cryptoini *cri);
+static int talitos_freesession(device_t dev, u_int64_t tid);
+static int talitos_process(device_t dev, struct cryptop *crp, int hint);
+static void dump_talitos_status(struct talitos_softc *sc);
+static int talitos_submit(struct talitos_softc *sc, struct talitos_desc *td, 
+								int chsel);
+static void talitos_doneprocessing(struct talitos_softc *sc);
+static void talitos_init_device(struct talitos_softc *sc);
+static void talitos_reset_device_master(struct talitos_softc *sc);
+static void talitos_reset_device(struct talitos_softc *sc);
+static void talitos_errorprocessing(struct talitos_softc *sc);
+#ifdef CONFIG_PPC_MERGE
+static int talitos_probe(struct of_device *ofdev, const struct of_device_id *match);
+static int talitos_remove(struct of_device *ofdev);
+#else
+static int talitos_probe(struct platform_device *pdev);
+static int talitos_remove(struct platform_device *pdev);
+#endif
+#ifdef CONFIG_OCF_RANDOMHARVEST
+static int talitos_read_random(void *arg, u_int32_t *buf, int maxwords);
+static void talitos_rng_init(struct talitos_softc *sc);
+#endif
+
+static device_method_t talitos_methods = {
+	/* crypto device methods */
+	DEVMETHOD(cryptodev_newsession,	talitos_newsession),
+	DEVMETHOD(cryptodev_freesession,talitos_freesession),
+	DEVMETHOD(cryptodev_process,	talitos_process),
+};
+
+#define debug talitos_debug
+int talitos_debug = 0;
+module_param(talitos_debug, int, 0644);
+MODULE_PARM_DESC(talitos_debug, "Enable debug");
+
+static inline void talitos_write(volatile unsigned *addr, u32 val)
+{
+        out_be32(addr, val);
+}
+
+static inline u32 talitos_read(volatile unsigned *addr)
+{
+        u32 val;
+        val = in_be32(addr);
+        return val;
+}
+
+static void dump_talitos_status(struct talitos_softc *sc)
+{
+	unsigned int v, v_hi, i, *ptr;
+	v = talitos_read(sc->sc_base_addr + TALITOS_MCR);
+	v_hi = talitos_read(sc->sc_base_addr + TALITOS_MCR_HI);
+	printk(KERN_INFO "%s: MCR          0x%08x_%08x\n",
+			device_get_nameunit(sc->sc_cdev), v, v_hi);
+	v = talitos_read(sc->sc_base_addr + TALITOS_IMR);
+	v_hi = talitos_read(sc->sc_base_addr + TALITOS_IMR_HI);
+	printk(KERN_INFO "%s: IMR          0x%08x_%08x\n",
+			device_get_nameunit(sc->sc_cdev), v, v_hi);
+	v = talitos_read(sc->sc_base_addr + TALITOS_ISR);
+	v_hi = talitos_read(sc->sc_base_addr + TALITOS_ISR_HI);
+	printk(KERN_INFO "%s: ISR          0x%08x_%08x\n",
+			device_get_nameunit(sc->sc_cdev), v, v_hi);
+	for (i = 0; i < sc->sc_num_channels; i++) { 
+		v = talitos_read(sc->sc_base_addr + i*TALITOS_CH_OFFSET + 
+			TALITOS_CH_CDPR);
+		v_hi = talitos_read(sc->sc_base_addr + i*TALITOS_CH_OFFSET + 
+			TALITOS_CH_CDPR_HI);
+		printk(KERN_INFO "%s: CDPR     ch%d 0x%08x_%08x\n", 
+				device_get_nameunit(sc->sc_cdev), i, v, v_hi);
+	}
+	for (i = 0; i < sc->sc_num_channels; i++) { 
+		v = talitos_read(sc->sc_base_addr + i*TALITOS_CH_OFFSET + 
+			TALITOS_CH_CCPSR);
+		v_hi = talitos_read(sc->sc_base_addr + i*TALITOS_CH_OFFSET + 
+			TALITOS_CH_CCPSR_HI);
+		printk(KERN_INFO "%s: CCPSR    ch%d 0x%08x_%08x\n", 
+				device_get_nameunit(sc->sc_cdev), i, v, v_hi);
+	}
+	ptr = sc->sc_base_addr + TALITOS_CH_DESCBUF;
+	for (i = 0; i < 16; i++) { 
+		v = talitos_read(ptr++); v_hi = talitos_read(ptr++);
+		printk(KERN_INFO "%s: DESCBUF  ch0 0x%08x_%08x (tdp%02d)\n", 
+				device_get_nameunit(sc->sc_cdev), v, v_hi, i);
+	}
+	return;
+}
+
+
+#ifdef CONFIG_OCF_RANDOMHARVEST
+/* 
+ * pull random numbers off the RNG FIFO, not exceeding amount available
+ */
+static int
+talitos_read_random(void *arg, u_int32_t *buf, int maxwords)
+{
+	struct talitos_softc *sc = (struct talitos_softc *) arg;
+	int rc;
+	u_int32_t v;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	/* check for things like FIFO underflow */
+	v = talitos_read(sc->sc_base_addr + TALITOS_RNGISR_HI);
+	if (unlikely(v)) {
+		printk(KERN_ERR "%s: RNGISR_HI error %08x\n",
+				device_get_nameunit(sc->sc_cdev), v);
+		return 0;
+	}
+	/*
+	 * OFL is number of available 64-bit words, 
+	 * shift and convert to a 32-bit word count
+	 */
+	v = talitos_read(sc->sc_base_addr + TALITOS_RNGSR_HI);
+	v = (v & TALITOS_RNGSR_HI_OFL) >> (16 - 1);
+	if (maxwords > v)
+		maxwords = v;
+	for (rc = 0; rc < maxwords; rc++) {
+		buf[rc] = talitos_read(sc->sc_base_addr + 
+			TALITOS_RNG_FIFO + rc*sizeof(u_int32_t));
+	}
+	if (maxwords & 1) {
+		/* 
+		 * RNG will complain with an AE in the RNGISR
+		 * if we don't complete the pairs of 32-bit reads
+		 * to its 64-bit register based FIFO
+		 */
+		v = talitos_read(sc->sc_base_addr + 
+			TALITOS_RNG_FIFO + rc*sizeof(u_int32_t));
+	}
+
+	return rc;
+}
+
+static void
+talitos_rng_init(struct talitos_softc *sc)
+{
+	u_int32_t v;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+	/* reset RNG EU */
+	v = talitos_read(sc->sc_base_addr + TALITOS_RNGRCR_HI);
+	v |= TALITOS_RNGRCR_HI_SR;
+	talitos_write(sc->sc_base_addr + TALITOS_RNGRCR_HI, v);
+	while ((talitos_read(sc->sc_base_addr + TALITOS_RNGSR_HI) 
+		& TALITOS_RNGSR_HI_RD) == 0)
+			cpu_relax();
+	/*
+	 * we tell the RNG to start filling the RNG FIFO
+	 * by writing the RNGDSR 
+	 */
+	v = talitos_read(sc->sc_base_addr + TALITOS_RNGDSR_HI);
+	talitos_write(sc->sc_base_addr + TALITOS_RNGDSR_HI, v);
+	/*
+	 * 64 bits of data will be pushed onto the FIFO every 
+	 * 256 SEC cycles until the FIFO is full.  The RNG then 
+	 * attempts to keep the FIFO full.
+	 */
+	v = talitos_read(sc->sc_base_addr + TALITOS_RNGISR_HI);
+	if (v) {
+		printk(KERN_ERR "%s: RNGISR_HI error %08x\n",
+			device_get_nameunit(sc->sc_cdev), v);
+		return;
+	}
+	/*
+	 * n.b. we need to add a FIPS test here - if the RNG is going 
+	 * to fail, it's going to fail at reset time
+	 */
+	return;
+}
+#endif /* CONFIG_OCF_RANDOMHARVEST */
+
+/*
+ * Generate a new software session.
+ */
+static int
+talitos_newsession(device_t dev, u_int32_t *sidp, struct cryptoini *cri)
+{
+	struct cryptoini *c, *encini = NULL, *macini = NULL;
+	struct talitos_softc *sc = device_get_softc(dev);
+	struct talitos_session *ses = NULL;
+	int sesn;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+	if (sidp == NULL || cri == NULL || sc == NULL) {
+		DPRINTF("%s,%d - EINVAL\n", __FILE__, __LINE__);
+		return EINVAL;
+	}
+	for (c = cri; c != NULL; c = c->cri_next) {
+		if (c->cri_alg == CRYPTO_MD5 ||
+		    c->cri_alg == CRYPTO_MD5_HMAC ||
+		    c->cri_alg == CRYPTO_SHA1 ||
+		    c->cri_alg == CRYPTO_SHA1_HMAC ||
+		    c->cri_alg == CRYPTO_NULL_HMAC) {
+			if (macini)
+				return EINVAL;
+			macini = c;
+		} else if (c->cri_alg == CRYPTO_DES_CBC ||
+		    c->cri_alg == CRYPTO_3DES_CBC ||
+		    c->cri_alg == CRYPTO_AES_CBC ||
+		    c->cri_alg == CRYPTO_NULL_CBC) {
+			if (encini)
+				return EINVAL;
+			encini = c;
+		} else {
+			DPRINTF("UNKNOWN c->cri_alg %d\n", encini->cri_alg);
+			return EINVAL;
+		}
+	}
+	if (encini == NULL && macini == NULL)
+		return EINVAL;
+	if (encini) {	
+		/* validate key length */
+		switch (encini->cri_alg) {
+		case CRYPTO_DES_CBC:
+			if (encini->cri_klen != 64)
+				return EINVAL;
+			break;
+		case CRYPTO_3DES_CBC:
+			if (encini->cri_klen != 192) {
+				return EINVAL;
+			}
+			break;
+		case CRYPTO_AES_CBC:
+			if (encini->cri_klen != 128 &&
+			    encini->cri_klen != 192 &&
+			    encini->cri_klen != 256)
+				return EINVAL;
+			break;
+		default:
+			DPRINTF("UNKNOWN encini->cri_alg %d\n", 
+				encini->cri_alg);
+			return EINVAL;
+		}
+	}
+
+	if (sc->sc_sessions == NULL) {
+		ses = sc->sc_sessions = (struct talitos_session *)
+			kmalloc(sizeof(struct talitos_session), SLAB_ATOMIC);
+		if (ses == NULL)
+			return ENOMEM;
+		memset(ses, 0, sizeof(struct talitos_session));
+		sesn = 0;
+		sc->sc_nsessions = 1;
+	} else {
+		for (sesn = 0; sesn < sc->sc_nsessions; sesn++) {
+			if (sc->sc_sessions[sesn].ses_used == 0) {
+				ses = &sc->sc_sessions[sesn];
+				break;
+			}
+		}
+
+		if (ses == NULL) {
+			/* allocating session */
+			sesn = sc->sc_nsessions;
+			ses = (struct talitos_session *) kmalloc(
+				(sesn + 1) * sizeof(struct talitos_session), 
+				SLAB_ATOMIC);
+			if (ses == NULL)
+				return ENOMEM;
+			memset(ses, 0,
+				(sesn + 1) * sizeof(struct talitos_session));
+			memcpy(ses, sc->sc_sessions, 
+				sesn * sizeof(struct talitos_session));
+			memset(sc->sc_sessions, 0,
+				sesn * sizeof(struct talitos_session));
+			kfree(sc->sc_sessions);
+			sc->sc_sessions = ses;
+			ses = &sc->sc_sessions[sesn];
+			sc->sc_nsessions++;
+		}
+	}
+
+	ses->ses_used = 1;
+
+	if (encini) {
+		/* get an IV */
+		/* XXX may read fewer than requested */
+		read_random(ses->ses_iv, sizeof(ses->ses_iv));
+
+		ses->ses_klen = (encini->cri_klen + 7) / 8;
+		memcpy(ses->ses_key, encini->cri_key, ses->ses_klen);
+		if (macini) {
+			/* doing hash on top of cipher */
+			ses->ses_hmac_len = (macini->cri_klen + 7) / 8;
+			memcpy(ses->ses_hmac, macini->cri_key,
+				ses->ses_hmac_len);
+		}
+	} else if (macini) {
+		/* doing hash */
+		ses->ses_klen = (macini->cri_klen + 7) / 8;
+		memcpy(ses->ses_key, macini->cri_key, ses->ses_klen);
+	}
+
+	/* back compat way of determining MSC result len */
+	if (macini) {
+		ses->ses_mlen = macini->cri_mlen;
+		if (ses->ses_mlen == 0) {
+			if (macini->cri_alg == CRYPTO_MD5_HMAC)
+				ses->ses_mlen = MD5_HASH_LEN;
+			else
+				ses->ses_mlen = SHA1_HASH_LEN;
+		}
+	}
+
+	/* really should make up a template td here, 
+	 * and only fill things like i/o and direction in process() */
+
+	/* assign session ID */
+	*sidp = TALITOS_SID(sc->sc_num, sesn);
+	return 0;
+}
+
+/*
+ * Deallocate a session.
+ */
+static int
+talitos_freesession(device_t dev, u_int64_t tid)
+{
+	struct talitos_softc *sc = device_get_softc(dev);
+	int session, ret;
+	u_int32_t sid = ((u_int32_t) tid) & 0xffffffff;
+
+	if (sc == NULL)
+		return EINVAL;
+	session = TALITOS_SESSION(sid);
+	if (session < sc->sc_nsessions) {
+		memset(&sc->sc_sessions[session], 0,
+			sizeof(sc->sc_sessions[session]));
+		ret = 0;
+	} else
+		ret = EINVAL;
+	return ret;
+}
+
+/*
+ * launch device processing - it will come back with done notification 
+ * in the form of an interrupt and/or HDR_DONE_BITS in header 
+ */
+static int 
+talitos_submit(
+	struct talitos_softc *sc,
+	struct talitos_desc *td,
+	int chsel)
+{
+	u_int32_t v;
+
+	v = dma_map_single(NULL, td, sizeof(*td), DMA_TO_DEVICE);
+	talitos_write(sc->sc_base_addr + 
+		chsel*TALITOS_CH_OFFSET + TALITOS_CH_FF, 0);
+	talitos_write(sc->sc_base_addr + 
+		chsel*TALITOS_CH_OFFSET + TALITOS_CH_FF_HI, v);
+	return 0;
+}
+
+static int
+talitos_process(device_t dev, struct cryptop *crp, int hint)
+{
+	int i, err = 0, ivsize;
+	struct talitos_softc *sc = device_get_softc(dev);
+	struct cryptodesc *crd1, *crd2, *maccrd, *enccrd;
+	caddr_t iv;
+	struct talitos_session *ses;
+	struct talitos_desc *td;
+	unsigned long flags;
+	/* descriptor mappings */
+	int hmac_key, hmac_data, cipher_iv, cipher_key, 
+		in_fifo, out_fifo, cipher_iv_out;
+	static int chsel = -1;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	if (crp == NULL || crp->crp_callback == NULL || sc == NULL) {
+		return EINVAL;
+	}
+	crp->crp_etype = 0;
+	if (TALITOS_SESSION(crp->crp_sid) >= sc->sc_nsessions) {
+		return EINVAL;
+	}
+
+	ses = &sc->sc_sessions[TALITOS_SESSION(crp->crp_sid)];
+
+        /* enter the channel scheduler */ 
+	spin_lock_irqsave(&sc->sc_chnfifolock[sc->sc_num_channels], flags);
+
+	/* reuse channel that already had/has requests for the required EU */
+	for (i = 0; i < sc->sc_num_channels; i++) {
+		if (sc->sc_chnlastalg[i] == crp->crp_desc->crd_alg)
+			break;
+	}
+	if (i == sc->sc_num_channels) {
+		/*
+		 * haven't seen this algo the last sc_num_channels or more
+		 * use round robin in this case
+	 	 * nb: sc->sc_num_channels must be power of 2 
+		 */
+		chsel = (chsel + 1) & (sc->sc_num_channels - 1);
+	} else {
+		/*
+		 * matches channel with same target execution unit; 
+		 * use same channel in this case
+		 */
+		chsel = i;
+	}
+	sc->sc_chnlastalg[chsel] = crp->crp_desc->crd_alg;
+
+        /* release the channel scheduler lock */ 
+	spin_unlock_irqrestore(&sc->sc_chnfifolock[sc->sc_num_channels], flags);
+
+	/* acquire the selected channel fifo lock */
+	spin_lock_irqsave(&sc->sc_chnfifolock[chsel], flags);
+
+	/* find and reserve next available descriptor-cryptop pair */
+	for (i = 0; i < sc->sc_chfifo_len; i++) {
+		if (sc->sc_chnfifo[chsel][i].cf_desc.hdr == 0) {
+			/* 
+			 * ensure correct descriptor formation by
+			 * avoiding inadvertently setting "optional" entries
+			 * e.g. not using "optional" dptr2 for MD/HMAC descs
+			 */
+			memset(&sc->sc_chnfifo[chsel][i].cf_desc,
+				0, sizeof(*td));
+			/* reserve it with done notification request bit */
+			sc->sc_chnfifo[chsel][i].cf_desc.hdr |= 
+				TALITOS_DONE_NOTIFY;
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&sc->sc_chnfifolock[chsel], flags);
+
+	if (i == sc->sc_chfifo_len) {
+		/* fifo full */
+		err = ERESTART;
+		goto errout;
+	}
+	
+	td = &sc->sc_chnfifo[chsel][i].cf_desc;
+	sc->sc_chnfifo[chsel][i].cf_crp = crp;
+
+	crd1 = crp->crp_desc;
+	if (crd1 == NULL) {
+		err = EINVAL;
+		goto errout;
+	}
+	crd2 = crd1->crd_next;
+	/* prevent compiler warning */
+	hmac_key = 0;
+	hmac_data = 0;
+	if (crd2 == NULL) {
+		td->hdr |= TD_TYPE_COMMON_NONSNOOP_NO_AFEU;
+		/* assign descriptor dword ptr mappings for this desc. type */
+		cipher_iv = 1;
+		cipher_key = 2;
+		in_fifo = 3;
+		cipher_iv_out = 5;
+		if (crd1->crd_alg == CRYPTO_MD5_HMAC ||
+		    crd1->crd_alg == CRYPTO_SHA1_HMAC ||
+		    crd1->crd_alg == CRYPTO_SHA1 ||
+		    crd1->crd_alg == CRYPTO_MD5) {
+			out_fifo = 5;
+			maccrd = crd1;
+			enccrd = NULL;
+		} else if (crd1->crd_alg == CRYPTO_DES_CBC ||
+		    crd1->crd_alg == CRYPTO_3DES_CBC ||
+		    crd1->crd_alg == CRYPTO_AES_CBC ||
+		    crd1->crd_alg == CRYPTO_ARC4) {
+			out_fifo = 4;
+			maccrd = NULL;
+			enccrd = crd1;
+		} else {
+			DPRINTF("UNKNOWN crd1->crd_alg %d\n", crd1->crd_alg);
+			err = EINVAL;
+			goto errout;
+		}
+	} else {
+		if (sc->sc_desc_types & TALITOS_HAS_DT_IPSEC_ESP) {
+			td->hdr |= TD_TYPE_IPSEC_ESP;
+		} else {
+			DPRINTF("unimplemented: multiple descriptor ipsec\n");
+			err = EINVAL;
+			goto errout;
+		}
+		/* assign descriptor dword ptr mappings for this desc. type */
+		hmac_key = 0;
+		hmac_data = 1;
+		cipher_iv = 2;
+		cipher_key = 3;
+		in_fifo = 4;
+		out_fifo = 5;
+		cipher_iv_out = 6;
+		if ((crd1->crd_alg == CRYPTO_MD5_HMAC ||
+                     crd1->crd_alg == CRYPTO_SHA1_HMAC ||
+                     crd1->crd_alg == CRYPTO_MD5 ||
+                     crd1->crd_alg == CRYPTO_SHA1) &&
+		    (crd2->crd_alg == CRYPTO_DES_CBC ||
+		     crd2->crd_alg == CRYPTO_3DES_CBC ||
+		     crd2->crd_alg == CRYPTO_AES_CBC ||
+		     crd2->crd_alg == CRYPTO_ARC4) &&
+		    ((crd2->crd_flags & CRD_F_ENCRYPT) == 0)) {
+			maccrd = crd1;
+			enccrd = crd2;
+		} else if ((crd1->crd_alg == CRYPTO_DES_CBC ||
+		     crd1->crd_alg == CRYPTO_ARC4 ||
+		     crd1->crd_alg == CRYPTO_3DES_CBC ||
+		     crd1->crd_alg == CRYPTO_AES_CBC) &&
+		    (crd2->crd_alg == CRYPTO_MD5_HMAC ||
+                     crd2->crd_alg == CRYPTO_SHA1_HMAC ||
+                     crd2->crd_alg == CRYPTO_MD5 ||
+                     crd2->crd_alg == CRYPTO_SHA1) &&
+		    (crd1->crd_flags & CRD_F_ENCRYPT)) {
+			enccrd = crd1;
+			maccrd = crd2;
+		} else {
+			/* We cannot order the SEC as requested */
+			printk("%s: cannot do the order\n",
+					device_get_nameunit(sc->sc_cdev));
+			err = EINVAL;
+			goto errout;
+		}
+	}
+	/* assign in_fifo and out_fifo based on input/output struct type */
+	if (crp->crp_flags & CRYPTO_F_SKBUF) {
+		/* using SKB buffers */
+		struct sk_buff *skb = (struct sk_buff *)crp->crp_buf;
+		if (skb_shinfo(skb)->nr_frags) {
+			printk("%s: skb frags unimplemented\n",
+					device_get_nameunit(sc->sc_cdev));
+			err = EINVAL;
+			goto errout;
+		}
+		td->ptr[in_fifo].ptr = dma_map_single(NULL, skb->data, 
+			skb->len, DMA_TO_DEVICE);
+		td->ptr[in_fifo].len = skb->len;
+		td->ptr[out_fifo].ptr = dma_map_single(NULL, skb->data, 
+			skb->len, DMA_TO_DEVICE);
+		td->ptr[out_fifo].len = skb->len;
+		td->ptr[hmac_data].ptr = dma_map_single(NULL, skb->data,
+			skb->len, DMA_TO_DEVICE);
+	} else if (crp->crp_flags & CRYPTO_F_IOV) {
+		/* using IOV buffers */
+		struct uio *uiop = (struct uio *)crp->crp_buf;
+		if (uiop->uio_iovcnt > 1) {
+			printk("%s: iov frags unimplemented\n",
+					device_get_nameunit(sc->sc_cdev));
+			err = EINVAL;
+			goto errout;
+		}
+		td->ptr[in_fifo].ptr = dma_map_single(NULL,
+			uiop->uio_iov->iov_base, crp->crp_ilen, DMA_TO_DEVICE);
+		td->ptr[in_fifo].len = crp->crp_ilen;
+		/* crp_olen is never set; always use crp_ilen */
+		td->ptr[out_fifo].ptr = dma_map_single(NULL,
+			uiop->uio_iov->iov_base,
+			crp->crp_ilen, DMA_TO_DEVICE);
+		td->ptr[out_fifo].len = crp->crp_ilen;
+	} else {
+		/* using contig buffers */
+		td->ptr[in_fifo].ptr = dma_map_single(NULL,
+			crp->crp_buf, crp->crp_ilen, DMA_TO_DEVICE);
+		td->ptr[in_fifo].len = crp->crp_ilen;
+		td->ptr[out_fifo].ptr = dma_map_single(NULL,
+			crp->crp_buf, crp->crp_ilen, DMA_TO_DEVICE);
+		td->ptr[out_fifo].len = crp->crp_ilen;
+	}
+	if (enccrd) {
+		switch (enccrd->crd_alg) {
+		case CRYPTO_3DES_CBC:
+			td->hdr |= TALITOS_MODE0_DEU_3DES;
+			/* FALLTHROUGH */
+		case CRYPTO_DES_CBC:
+			td->hdr |= TALITOS_SEL0_DEU
+				|  TALITOS_MODE0_DEU_CBC;
+			if (enccrd->crd_flags & CRD_F_ENCRYPT)
+				td->hdr |= TALITOS_MODE0_DEU_ENC;
+			ivsize = 2*sizeof(u_int32_t);
+			DPRINTF("%cDES ses %d ch %d len %d\n",
+				(td->hdr & TALITOS_MODE0_DEU_3DES)?'3':'1',
+				(u32)TALITOS_SESSION(crp->crp_sid),
+				chsel, td->ptr[in_fifo].len);
+			break;
+		case CRYPTO_AES_CBC:
+			td->hdr |= TALITOS_SEL0_AESU
+				|  TALITOS_MODE0_AESU_CBC;
+			if (enccrd->crd_flags & CRD_F_ENCRYPT)
+				td->hdr |= TALITOS_MODE0_AESU_ENC;
+			ivsize = 4*sizeof(u_int32_t);
+			DPRINTF("AES  ses %d ch %d len %d\n",
+				(u32)TALITOS_SESSION(crp->crp_sid),
+				chsel, td->ptr[in_fifo].len);
+			break;
+		default:
+			printk("%s: unimplemented enccrd->crd_alg %d\n",
+					device_get_nameunit(sc->sc_cdev), enccrd->crd_alg);
+			err = EINVAL;
+			goto errout;
+		}
+		/*
+		 * Setup encrypt/decrypt state.  When using basic ops
+		 * we can't use an inline IV because hash/crypt offset
+		 * must be from the end of the IV to the start of the
+		 * crypt data and this leaves out the preceding header
+		 * from the hash calculation.  Instead we place the IV
+		 * in the state record and set the hash/crypt offset to
+		 * copy both the header+IV.
+		 */
+		if (enccrd->crd_flags & CRD_F_ENCRYPT) {
+			td->hdr |= TALITOS_DIR_OUTBOUND; 
+			if (enccrd->crd_flags & CRD_F_IV_EXPLICIT)
+				iv = enccrd->crd_iv;
+			else
+				iv = (caddr_t) ses->ses_iv;
+			if ((enccrd->crd_flags & CRD_F_IV_PRESENT) == 0) {
+				crypto_copyback(crp->crp_flags, crp->crp_buf,
+				    enccrd->crd_inject, ivsize, iv);
+			}
+		} else {
+			td->hdr |= TALITOS_DIR_INBOUND; 
+			if (enccrd->crd_flags & CRD_F_IV_EXPLICIT) {
+				iv = enccrd->crd_iv;
+				bcopy(enccrd->crd_iv, iv, ivsize);
+			} else {
+				iv = (caddr_t) ses->ses_iv;
+				crypto_copydata(crp->crp_flags, crp->crp_buf,
+				    enccrd->crd_inject, ivsize, iv);
+			}
+		}
+		td->ptr[cipher_iv].ptr = dma_map_single(NULL, iv, ivsize, 
+			DMA_TO_DEVICE);
+		td->ptr[cipher_iv].len = ivsize;
+		/*
+		 * we don't need the cipher iv out length/pointer
+		 * field to do ESP IPsec. Therefore we set the len field as 0,
+		 * which tells the SEC not to do anything with this len/ptr
+		 * field. Previously, when length/pointer as pointing to iv,
+		 * it gave us corruption of packets.
+		 */
+		td->ptr[cipher_iv_out].len = 0;
+	}
+	if (enccrd && maccrd) {
+		/* this is ipsec only for now */
+		td->hdr |= TALITOS_SEL1_MDEU
+			|  TALITOS_MODE1_MDEU_INIT
+			|  TALITOS_MODE1_MDEU_PAD;
+		switch (maccrd->crd_alg) {
+			case	CRYPTO_MD5:	
+				td->hdr |= TALITOS_MODE1_MDEU_MD5;
+				break;
+			case	CRYPTO_MD5_HMAC:	
+				td->hdr |= TALITOS_MODE1_MDEU_MD5_HMAC;
+				break;
+			case	CRYPTO_SHA1:	
+				td->hdr |= TALITOS_MODE1_MDEU_SHA1;
+				break;
+			case	CRYPTO_SHA1_HMAC:	
+				td->hdr |= TALITOS_MODE1_MDEU_SHA1_HMAC;
+				break;
+			default:
+				/* We cannot order the SEC as requested */
+				printk("%s: cannot do the order\n",
+						device_get_nameunit(sc->sc_cdev));
+				err = EINVAL;
+				goto errout;
+		}
+		if ((maccrd->crd_alg == CRYPTO_MD5_HMAC) ||
+		   (maccrd->crd_alg == CRYPTO_SHA1_HMAC)) {
+			/*
+			 * The offset from hash data to the start of
+			 * crypt data is the difference in the skips.
+			 */
+			/* ipsec only for now */
+			td->ptr[hmac_key].ptr = dma_map_single(NULL, 
+				ses->ses_hmac, ses->ses_hmac_len, DMA_TO_DEVICE);
+			td->ptr[hmac_key].len = ses->ses_hmac_len;
+			td->ptr[in_fifo].ptr  += enccrd->crd_skip;
+			td->ptr[in_fifo].len  =  enccrd->crd_len;
+			td->ptr[out_fifo].ptr += enccrd->crd_skip;
+			td->ptr[out_fifo].len =  enccrd->crd_len;
+			/* bytes of HMAC to postpend to ciphertext */
+			td->ptr[out_fifo].extent =  ses->ses_mlen;
+			td->ptr[hmac_data].ptr += maccrd->crd_skip; 
+			td->ptr[hmac_data].len = enccrd->crd_skip - maccrd->crd_skip;
+		}
+		if (enccrd->crd_flags & CRD_F_KEY_EXPLICIT) {
+			printk("%s: CRD_F_KEY_EXPLICIT unimplemented\n",
+					device_get_nameunit(sc->sc_cdev));
+		}
+	}
+	if (!enccrd && maccrd) {
+		/* single MD5 or SHA */
+		td->hdr |= TALITOS_SEL0_MDEU
+				|  TALITOS_MODE0_MDEU_INIT
+				|  TALITOS_MODE0_MDEU_PAD;
+		switch (maccrd->crd_alg) {
+			case	CRYPTO_MD5:	
+				td->hdr |= TALITOS_MODE0_MDEU_MD5;
+				DPRINTF("MD5  ses %d ch %d len %d\n",
+					(u32)TALITOS_SESSION(crp->crp_sid), 
+					chsel, td->ptr[in_fifo].len);
+				break;
+			case	CRYPTO_MD5_HMAC:	
+				td->hdr |= TALITOS_MODE0_MDEU_MD5_HMAC;
+				break;
+			case	CRYPTO_SHA1:	
+				td->hdr |= TALITOS_MODE0_MDEU_SHA1;
+				DPRINTF("SHA1 ses %d ch %d len %d\n",
+					(u32)TALITOS_SESSION(crp->crp_sid), 
+					chsel, td->ptr[in_fifo].len);
+				break;
+			case	CRYPTO_SHA1_HMAC:	
+				td->hdr |= TALITOS_MODE0_MDEU_SHA1_HMAC;
+				break;
+			default:
+				/* We cannot order the SEC as requested */
+				DPRINTF("cannot do the order\n");
+				err = EINVAL;
+				goto errout;
+		}
+
+		if (crp->crp_flags & CRYPTO_F_IOV)
+			td->ptr[out_fifo].ptr += maccrd->crd_inject;
+
+		if ((maccrd->crd_alg == CRYPTO_MD5_HMAC) ||
+		   (maccrd->crd_alg == CRYPTO_SHA1_HMAC)) {
+			td->ptr[hmac_key].ptr = dma_map_single(NULL, 
+				ses->ses_hmac, ses->ses_hmac_len, 
+				DMA_TO_DEVICE);
+			td->ptr[hmac_key].len = ses->ses_hmac_len;
+		}
+	} 
+	else {
+		/* using process key (session data has duplicate) */
+		td->ptr[cipher_key].ptr = dma_map_single(NULL, 
+			enccrd->crd_key, (enccrd->crd_klen + 7) / 8, 
+			DMA_TO_DEVICE);
+		td->ptr[cipher_key].len = (enccrd->crd_klen + 7) / 8;
+	}
+	/* descriptor complete - GO! */
+	return talitos_submit(sc, td, chsel);
+
+errout:
+	if (err != ERESTART) {
+		crp->crp_etype = err;
+		crypto_done(crp);
+	}
+	return err;
+}
+
+/* go through all channels descriptors, notifying OCF what has 
+ * _and_hasn't_ successfully completed and reset the device 
+ * (otherwise it's up to decoding desc hdrs!)
+ */
+static void talitos_errorprocessing(struct talitos_softc *sc)
+{
+	unsigned long flags;
+	int i, j;
+
+	/* disable further scheduling until under control */
+	spin_lock_irqsave(&sc->sc_chnfifolock[sc->sc_num_channels], flags);
+
+	if (debug) dump_talitos_status(sc);
+	/* go through descriptors, try and salvage those successfully done, 
+	 * and EIO those that weren't
+	 */
+	for (i = 0; i < sc->sc_num_channels; i++) {
+		spin_lock_irqsave(&sc->sc_chnfifolock[i], flags);
+		for (j = 0; j < sc->sc_chfifo_len; j++) {
+			if (sc->sc_chnfifo[i][j].cf_desc.hdr) {
+				if ((sc->sc_chnfifo[i][j].cf_desc.hdr 
+					& TALITOS_HDR_DONE_BITS) 
+					!= TALITOS_HDR_DONE_BITS) {
+					/* this one didn't finish */
+					/* signify in crp->etype */
+					sc->sc_chnfifo[i][j].cf_crp->crp_etype 
+						= EIO;
+				}
+			} else
+				continue; /* free entry */
+			/* either way, notify ocf */
+			crypto_done(sc->sc_chnfifo[i][j].cf_crp);
+			/* and tag it available again
+			 *
+			 * memset to ensure correct descriptor formation by
+			 * avoiding inadvertently setting "optional" entries
+			 * e.g. not using "optional" dptr2 MD/HMAC processing
+			 */
+			memset(&sc->sc_chnfifo[i][j].cf_desc,
+				0, sizeof(struct talitos_desc));
+		}
+		spin_unlock_irqrestore(&sc->sc_chnfifolock[i], flags);
+	}
+	/* reset and initialize the SEC h/w device */
+	talitos_reset_device(sc);
+	talitos_init_device(sc);
+#ifdef CONFIG_OCF_RANDOMHARVEST
+	if (sc->sc_exec_units & TALITOS_HAS_EU_RNG)
+		talitos_rng_init(sc);
+#endif
+
+	/* Okay. Stand by. */
+	spin_unlock_irqrestore(&sc->sc_chnfifolock[sc->sc_num_channels], flags);
+
+	return;
+}
+
+/* go through all channels descriptors, notifying OCF what's been done */
+static void talitos_doneprocessing(struct talitos_softc *sc)
+{
+	unsigned long flags;
+	int i, j;
+
+	/* go through descriptors looking for done bits */
+	for (i = 0; i < sc->sc_num_channels; i++) {
+		spin_lock_irqsave(&sc->sc_chnfifolock[i], flags);
+		for (j = 0; j < sc->sc_chfifo_len; j++) {
+			/* descriptor has done bits set? */
+			if ((sc->sc_chnfifo[i][j].cf_desc.hdr 
+				& TALITOS_HDR_DONE_BITS) 
+				== TALITOS_HDR_DONE_BITS) {
+				/* notify ocf */
+				crypto_done(sc->sc_chnfifo[i][j].cf_crp);
+				/* and tag it available again
+				 *
+				 * memset to ensure correct descriptor formation by
+				 * avoiding inadvertently setting "optional" entries
+				 * e.g. not using "optional" dptr2 MD/HMAC processing
+				 */
+				memset(&sc->sc_chnfifo[i][j].cf_desc,
+					0, sizeof(struct talitos_desc));
+			}
+		}
+		spin_unlock_irqrestore(&sc->sc_chnfifolock[i], flags);
+	}
+	return;
+}
+
+static irqreturn_t
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19)
+talitos_intr(int irq, void *arg)
+#else
+talitos_intr(int irq, void *arg, struct pt_regs *regs)
+#endif
+{
+	struct talitos_softc *sc = arg;
+	u_int32_t v, v_hi;
+	
+	/* ack */
+	v = talitos_read(sc->sc_base_addr + TALITOS_ISR);
+	v_hi = talitos_read(sc->sc_base_addr + TALITOS_ISR_HI);
+	talitos_write(sc->sc_base_addr + TALITOS_ICR, v);
+	talitos_write(sc->sc_base_addr + TALITOS_ICR_HI, v_hi);
+
+	if (unlikely(v & TALITOS_ISR_ERROR)) {
+		/* Okay, Houston, we've had a problem here. */
+		printk(KERN_DEBUG "%s: got error interrupt - ISR 0x%08x_%08x\n",
+				device_get_nameunit(sc->sc_cdev), v, v_hi);
+		talitos_errorprocessing(sc);
+	} else
+	if (likely(v & TALITOS_ISR_DONE)) {
+		talitos_doneprocessing(sc);
+	}
+	return IRQ_HANDLED;
+}
+
+/*
+ * Initialize registers we need to touch only once.
+ */
+static void
+talitos_init_device(struct talitos_softc *sc)
+{
+	u_int32_t v;
+	int i;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	/* init all channels */
+	for (i = 0; i < sc->sc_num_channels; i++) {
+		v = talitos_read(sc->sc_base_addr + 
+			i*TALITOS_CH_OFFSET + TALITOS_CH_CCCR_HI);
+		v |= TALITOS_CH_CCCR_HI_CDWE
+		  |  TALITOS_CH_CCCR_HI_CDIE;  /* invoke interrupt if done */
+		talitos_write(sc->sc_base_addr + 
+			i*TALITOS_CH_OFFSET + TALITOS_CH_CCCR_HI, v);
+	}
+	/* enable all interrupts */
+	v = talitos_read(sc->sc_base_addr + TALITOS_IMR);
+	v |= TALITOS_IMR_ALL;
+	talitos_write(sc->sc_base_addr + TALITOS_IMR, v);
+	v = talitos_read(sc->sc_base_addr + TALITOS_IMR_HI);
+	v |= TALITOS_IMR_HI_ERRONLY;
+	talitos_write(sc->sc_base_addr + TALITOS_IMR_HI, v);
+	return;
+}
+
+/*
+ * set the master reset bit on the device.
+ */
+static void
+talitos_reset_device_master(struct talitos_softc *sc)
+{
+	u_int32_t v;
+
+	/* Reset the device by writing 1 to MCR:SWR and waiting 'til cleared */
+	v = talitos_read(sc->sc_base_addr + TALITOS_MCR);
+	talitos_write(sc->sc_base_addr + TALITOS_MCR, v | TALITOS_MCR_SWR);
+
+	while (talitos_read(sc->sc_base_addr + TALITOS_MCR) & TALITOS_MCR_SWR)
+		cpu_relax();
+
+	return;
+}
+
+/*
+ * Resets the device.  Values in the registers are left as is
+ * from the reset (i.e. initial values are assigned elsewhere).
+ */
+static void
+talitos_reset_device(struct talitos_softc *sc)
+{
+	u_int32_t v;
+	int i;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	/*
+	 * Master reset
+	 * errata documentation: warning: certain SEC interrupts 
+	 * are not fully cleared by writing the MCR:SWR bit, 
+	 * set bit twice to completely reset 
+	 */
+	talitos_reset_device_master(sc);	/* once */
+	talitos_reset_device_master(sc);	/* and once again */
+	
+	/* reset all channels */
+	for (i = 0; i < sc->sc_num_channels; i++) {
+		v = talitos_read(sc->sc_base_addr + i*TALITOS_CH_OFFSET +
+			TALITOS_CH_CCCR);
+		talitos_write(sc->sc_base_addr + i*TALITOS_CH_OFFSET +
+			TALITOS_CH_CCCR, v | TALITOS_CH_CCCR_RESET);
+	}
+}
+
+/* Set up the crypto device structure, private data,
+ * and anything else we need before we start */
+#ifdef CONFIG_PPC_MERGE
+static int talitos_probe(struct of_device *ofdev, const struct of_device_id *match)
+#else
+static int talitos_probe(struct platform_device *pdev)
+#endif
+{
+	struct talitos_softc *sc = NULL;
+	struct resource *r;
+#ifdef CONFIG_PPC_MERGE
+	struct device *device = &ofdev->dev;
+	struct device_node *np = ofdev->node;
+	const unsigned int *prop;
+	int err;
+	struct resource res;
+#endif
+	static int num_chips = 0;
+	int rc;
+	int i;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+
+	sc = (struct talitos_softc *) kmalloc(sizeof(*sc), GFP_KERNEL);
+	if (!sc)
+		return -ENOMEM;
+	memset(sc, 0, sizeof(*sc));
+
+	softc_device_init(sc, DRV_NAME, num_chips, talitos_methods);
+
+	sc->sc_irq = -1;
+	sc->sc_cid = -1;
+#ifndef CONFIG_PPC_MERGE
+	sc->sc_dev = pdev;
+#endif
+	sc->sc_num = num_chips++;
+
+#ifdef CONFIG_PPC_MERGE
+	dev_set_drvdata(device, sc);
+#else
+	platform_set_drvdata(sc->sc_dev, sc);
+#endif
+
+	/* get the irq line */
+#ifdef CONFIG_PPC_MERGE
+	err = of_address_to_resource(np, 0, &res);
+	if (err)
+		return -EINVAL;
+	r = &res;
+
+	sc->sc_irq = irq_of_parse_and_map(np, 0);
+#else
+	/* get a pointer to the register memory */
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	sc->sc_irq = platform_get_irq(pdev, 0);
+#endif
+	rc = request_irq(sc->sc_irq, talitos_intr, 0,
+			device_get_nameunit(sc->sc_cdev), sc);
+	if (rc) {
+		printk(KERN_ERR "%s: failed to hook irq %d\n", 
+				device_get_nameunit(sc->sc_cdev), sc->sc_irq);
+		sc->sc_irq = -1;
+		goto out;
+	}
+
+	sc->sc_base_addr = (ocf_iomem_t) ioremap(r->start, (r->end - r->start));
+	if (!sc->sc_base_addr) {
+		printk(KERN_ERR "%s: failed to ioremap\n",
+				device_get_nameunit(sc->sc_cdev));
+		goto out;
+	}
+
+	/* figure out our SEC's properties and capabilities */
+	sc->sc_chiprev = (u64)talitos_read(sc->sc_base_addr + TALITOS_ID) << 32
+		 | talitos_read(sc->sc_base_addr + TALITOS_ID_HI);
+	DPRINTF("sec id 0x%llx\n", sc->sc_chiprev);
+
+#ifdef CONFIG_PPC_MERGE
+	/* get SEC properties from device tree, defaulting to SEC 2.0 */
+
+	prop = of_get_property(np, "num-channels", NULL);
+	sc->sc_num_channels = prop ? *prop : TALITOS_NCHANNELS_SEC_2_0;
+
+	prop = of_get_property(np, "channel-fifo-len", NULL);
+	sc->sc_chfifo_len = prop ? *prop : TALITOS_CHFIFOLEN_SEC_2_0;
+
+	prop = of_get_property(np, "exec-units-mask", NULL);
+	sc->sc_exec_units = prop ? *prop : TALITOS_HAS_EUS_SEC_2_0;
+
+	prop = of_get_property(np, "descriptor-types-mask", NULL);
+	sc->sc_desc_types = prop ? *prop : TALITOS_HAS_DESCTYPES_SEC_2_0;
+#else
+	/* bulk should go away with openfirmware flat device tree support */
+	if (sc->sc_chiprev & TALITOS_ID_SEC_2_0) {
+		sc->sc_num_channels = TALITOS_NCHANNELS_SEC_2_0;
+		sc->sc_chfifo_len = TALITOS_CHFIFOLEN_SEC_2_0;
+		sc->sc_exec_units = TALITOS_HAS_EUS_SEC_2_0;
+		sc->sc_desc_types = TALITOS_HAS_DESCTYPES_SEC_2_0;
+	} else {
+		printk(KERN_ERR "%s: failed to id device\n",
+				device_get_nameunit(sc->sc_cdev));
+		goto out;
+	}
+#endif
+
+	/* + 1 is for the meta-channel lock used by the channel scheduler */
+	sc->sc_chnfifolock = (spinlock_t *) kmalloc(
+		(sc->sc_num_channels + 1) * sizeof(spinlock_t), GFP_KERNEL);
+	if (!sc->sc_chnfifolock)
+		goto out;
+	for (i = 0; i < sc->sc_num_channels + 1; i++) {
+		spin_lock_init(&sc->sc_chnfifolock[i]);
+	}
+
+	sc->sc_chnlastalg = (int *) kmalloc(
+		sc->sc_num_channels * sizeof(int), GFP_KERNEL);
+	if (!sc->sc_chnlastalg)
+		goto out;
+	memset(sc->sc_chnlastalg, 0, sc->sc_num_channels * sizeof(int));
+
+	sc->sc_chnfifo = (struct desc_cryptop_pair **) kmalloc(
+		sc->sc_num_channels * sizeof(struct desc_cryptop_pair *), 
+		GFP_KERNEL);
+	if (!sc->sc_chnfifo)
+		goto out;
+	for (i = 0; i < sc->sc_num_channels; i++) {
+		sc->sc_chnfifo[i] = (struct desc_cryptop_pair *) kmalloc(
+			sc->sc_chfifo_len * sizeof(struct desc_cryptop_pair), 
+			GFP_KERNEL);
+		if (!sc->sc_chnfifo[i])
+			goto out;
+		memset(sc->sc_chnfifo[i], 0, 
+			sc->sc_chfifo_len * sizeof(struct desc_cryptop_pair));
+	}
+
+	/* reset and initialize the SEC h/w device */
+	talitos_reset_device(sc);
+	talitos_init_device(sc);
+
+	sc->sc_cid = crypto_get_driverid(softc_get_device(sc),CRYPTOCAP_F_HARDWARE);
+	if (sc->sc_cid < 0) {
+		printk(KERN_ERR "%s: could not get crypto driver id\n",
+				device_get_nameunit(sc->sc_cdev));
+		goto out;
+	}
+
+	/* register algorithms with the framework */
+	printk("%s:", device_get_nameunit(sc->sc_cdev));
+
+	if (sc->sc_exec_units & TALITOS_HAS_EU_RNG)  {
+		printk(" rng");
+#ifdef CONFIG_OCF_RANDOMHARVEST
+		talitos_rng_init(sc);
+		crypto_rregister(sc->sc_cid, talitos_read_random, sc);
+#endif
+	}
+	if (sc->sc_exec_units & TALITOS_HAS_EU_DEU) {
+		printk(" des/3des");
+		crypto_register(sc->sc_cid, CRYPTO_3DES_CBC, 0, 0);
+		crypto_register(sc->sc_cid, CRYPTO_DES_CBC, 0, 0);
+	}
+	if (sc->sc_exec_units & TALITOS_HAS_EU_AESU) {
+		printk(" aes");
+		crypto_register(sc->sc_cid, CRYPTO_AES_CBC, 0, 0);
+	}
+	if (sc->sc_exec_units & TALITOS_HAS_EU_MDEU) {
+		printk(" md5");
+		crypto_register(sc->sc_cid, CRYPTO_MD5, 0, 0);
+		/* HMAC support only with IPsec for now */
+		crypto_register(sc->sc_cid, CRYPTO_MD5_HMAC, 0, 0);
+		printk(" sha1");
+		crypto_register(sc->sc_cid, CRYPTO_SHA1, 0, 0);
+		/* HMAC support only with IPsec for now */
+		crypto_register(sc->sc_cid, CRYPTO_SHA1_HMAC, 0, 0);
+	}
+	printk("\n");
+	return 0;
+
+out:
+#ifndef CONFIG_PPC_MERGE
+	talitos_remove(pdev);
+#endif
+	return -ENOMEM;
+}
+
+#ifdef CONFIG_PPC_MERGE
+static int talitos_remove(struct of_device *ofdev)
+#else
+static int talitos_remove(struct platform_device *pdev)
+#endif
+{
+#ifdef CONFIG_PPC_MERGE
+	struct talitos_softc *sc = dev_get_drvdata(&ofdev->dev);
+#else
+	struct talitos_softc *sc = platform_get_drvdata(pdev);
+#endif
+	int i;
+
+	DPRINTF("%s()\n", __FUNCTION__);
+	if (sc->sc_cid >= 0)
+		crypto_unregister_all(sc->sc_cid);
+	if (sc->sc_chnfifo) {
+		for (i = 0; i < sc->sc_num_channels; i++)
+			if (sc->sc_chnfifo[i])
+				kfree(sc->sc_chnfifo[i]);
+		kfree(sc->sc_chnfifo);
+	}
+	if (sc->sc_chnlastalg)
+		kfree(sc->sc_chnlastalg);
+	if (sc->sc_chnfifolock)
+		kfree(sc->sc_chnfifolock);
+	if (sc->sc_irq != -1)
+		free_irq(sc->sc_irq, sc);
+	if (sc->sc_base_addr)
+		iounmap((void *) sc->sc_base_addr);
+	kfree(sc);
+	return 0;
+}
+
+#ifdef CONFIG_PPC_MERGE
+static struct of_device_id talitos_match[] = {
+	{
+		.type = "crypto",
+		.compatible = "talitos",
+	},
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, talitos_match);
+
+static struct of_platform_driver talitos_driver = {
+	.name		= DRV_NAME,
+	.match_table	= talitos_match,
+	.probe		= talitos_probe,
+	.remove		= talitos_remove,
+};
+
+static int __init talitos_init(void)
+{
+	return of_register_platform_driver(&talitos_driver);
+}
+
+static void __exit talitos_exit(void)
+{
+	of_unregister_platform_driver(&talitos_driver);
+}
+#else
+/* Structure for a platform device driver */
+static struct platform_driver talitos_driver = {
+	.probe = talitos_probe,
+	.remove = talitos_remove,
+	.driver = {
+		.name = "fsl-sec2",
+	}
+};
+
+static int __init talitos_init(void)
+{
+	return platform_driver_register(&talitos_driver);
+}
+
+static void __exit talitos_exit(void)
+{
+	platform_driver_unregister(&talitos_driver);
+}
+#endif
+
+module_init(talitos_init);
+module_exit(talitos_exit);
+
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_AUTHOR("kim.phillips@freescale.com");
+MODULE_DESCRIPTION("OCF driver for Freescale SEC (talitos)");
diff --git a/target/linux/generic/files/crypto/ocf/talitos/talitos_dev.h b/target/linux/generic/files/crypto/ocf/talitos/talitos_dev.h
new file mode 100644
index 0000000000..a8b04799fa
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/talitos/talitos_dev.h
@@ -0,0 +1,277 @@
+/*
+ * Freescale SEC (talitos) device dependent data structures
+ *
+ * Copyright (c) 2006 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+/* device ID register values */
+#define TALITOS_ID_SEC_2_0	0x40
+#define TALITOS_ID_SEC_2_1	0x40 /* cross ref with IP block revision reg */
+
+/*
+ * following num_channels, channel-fifo-depth, exec-unit-mask, and 
+ * descriptor-types-mask are for forward-compatibility with openfirmware
+ * flat device trees
+ */
+
+/*
+ *  num_channels : the number of channels available in each SEC version.
+ */
+
+/* n.b. this driver requires these values be a power of 2 */
+#define TALITOS_NCHANNELS_SEC_1_0	4
+#define TALITOS_NCHANNELS_SEC_1_2	1
+#define TALITOS_NCHANNELS_SEC_2_0	4
+#define TALITOS_NCHANNELS_SEC_2_01	4
+#define TALITOS_NCHANNELS_SEC_2_1	4
+#define TALITOS_NCHANNELS_SEC_2_4	4
+
+/*
+ *  channel-fifo-depth : The number of descriptor
+ *  pointers a channel fetch fifo can hold.
+ */
+#define TALITOS_CHFIFOLEN_SEC_1_0	1
+#define TALITOS_CHFIFOLEN_SEC_1_2	1
+#define TALITOS_CHFIFOLEN_SEC_2_0	24
+#define TALITOS_CHFIFOLEN_SEC_2_01	24
+#define TALITOS_CHFIFOLEN_SEC_2_1	24
+#define TALITOS_CHFIFOLEN_SEC_2_4	24
+
+/* 
+ *  exec-unit-mask : The bitmask representing what Execution Units (EUs)
+ *  are available. EU information should be encoded following the SEC's 
+ *  EU_SEL0 bitfield documentation, i.e. as follows:
+ * 
+ *    bit 31 = set if SEC permits no-EU selection (should be always set)
+ *    bit 30 = set if SEC has the ARC4 EU (AFEU)
+ *    bit 29 = set if SEC has the des/3des EU (DEU)
+ *    bit 28 = set if SEC has the message digest EU (MDEU)
+ *    bit 27 = set if SEC has the random number generator EU (RNG)
+ *    bit 26 = set if SEC has the public key EU (PKEU)
+ *    bit 25 = set if SEC has the aes EU (AESU)
+ *    bit 24 = set if SEC has the Kasumi EU (KEU)
+ * 
+ */
+#define TALITOS_HAS_EU_NONE		(1<<0)
+#define TALITOS_HAS_EU_AFEU		(1<<1)
+#define TALITOS_HAS_EU_DEU		(1<<2)
+#define TALITOS_HAS_EU_MDEU		(1<<3)
+#define TALITOS_HAS_EU_RNG		(1<<4)
+#define TALITOS_HAS_EU_PKEU		(1<<5)
+#define TALITOS_HAS_EU_AESU		(1<<6)
+#define TALITOS_HAS_EU_KEU		(1<<7)
+
+/* the corresponding masks for each SEC version */
+#define TALITOS_HAS_EUS_SEC_1_0		0x7f
+#define TALITOS_HAS_EUS_SEC_1_2		0x4d
+#define TALITOS_HAS_EUS_SEC_2_0		0x7f
+#define TALITOS_HAS_EUS_SEC_2_01	0x7f
+#define TALITOS_HAS_EUS_SEC_2_1		0xff
+#define TALITOS_HAS_EUS_SEC_2_4		0x7f
+
+/*
+ *  descriptor-types-mask : The bitmask representing what descriptors
+ *  are available. Descriptor type information should be encoded 
+ *  following the SEC's Descriptor Header Dword DESC_TYPE field 
+ *  documentation, i.e. as follows:
+ *
+ *    bit 0  = set if SEC supports the aesu_ctr_nonsnoop desc. type
+ *    bit 1  = set if SEC supports the ipsec_esp descriptor type
+ *    bit 2  = set if SEC supports the common_nonsnoop desc. type
+ *    bit 3  = set if SEC supports the 802.11i AES ccmp desc. type
+ *    bit 4  = set if SEC supports the hmac_snoop_no_afeu desc. type
+ *    bit 5  = set if SEC supports the srtp descriptor type
+ *    bit 6  = set if SEC supports the non_hmac_snoop_no_afeu desc.type
+ *    bit 7  = set if SEC supports the pkeu_assemble descriptor type
+ *    bit 8  = set if SEC supports the aesu_key_expand_output desc.type
+ *    bit 9  = set if SEC supports the pkeu_ptmul descriptor type
+ *    bit 10 = set if SEC supports the common_nonsnoop_afeu desc. type
+ *    bit 11 = set if SEC supports the pkeu_ptadd_dbl descriptor type
+ *
+ *  ..and so on and so forth.
+ */
+#define TALITOS_HAS_DT_AESU_CTR_NONSNOOP	(1<<0)
+#define TALITOS_HAS_DT_IPSEC_ESP		(1<<1)
+#define TALITOS_HAS_DT_COMMON_NONSNOOP		(1<<2)
+
+/* the corresponding masks for each SEC version */
+#define TALITOS_HAS_DESCTYPES_SEC_2_0	0x01010ebf
+#define TALITOS_HAS_DESCTYPES_SEC_2_1	0x012b0ebf
+
+/* 
+ * a TALITOS_xxx_HI address points to the low data bits (32-63) of the register
+ */
+
+/* global register offset addresses */
+#define TALITOS_ID		0x1020
+#define TALITOS_ID_HI		0x1024
+#define TALITOS_MCR		0x1030		/* master control register */
+#define TALITOS_MCR_HI		0x1038		/* master control register */
+#define TALITOS_MCR_SWR		0x1
+#define TALITOS_IMR		0x1008		/* interrupt mask register */
+#define TALITOS_IMR_ALL		0x00010fff	/* enable all interrupts mask */
+#define TALITOS_IMR_ERRONLY	0x00010aaa	/* enable error interrupts */
+#define TALITOS_IMR_HI		0x100C		/* interrupt mask register */
+#define TALITOS_IMR_HI_ALL	0x00323333	/* enable all interrupts mask */
+#define TALITOS_IMR_HI_ERRONLY	0x00222222	/* enable error interrupts */
+#define TALITOS_ISR		0x1010		/* interrupt status register */
+#define TALITOS_ISR_ERROR	0x00010faa	/* errors mask */
+#define TALITOS_ISR_DONE	0x00000055	/* channel(s) done mask */
+#define TALITOS_ISR_HI		0x1014		/* interrupt status register */
+#define TALITOS_ICR		0x1018		/* interrupt clear register */
+#define TALITOS_ICR_HI		0x101C		/* interrupt clear register */
+
+/* channel register address stride */
+#define TALITOS_CH_OFFSET	0x100
+
+/* channel register offset addresses and bits */
+#define TALITOS_CH_CCCR		0x1108	/* Crypto-Channel Config Register */
+#define TALITOS_CH_CCCR_RESET	0x1	/* Channel Reset bit */
+#define TALITOS_CH_CCCR_HI	0x110c	/* Crypto-Channel Config Register */
+#define TALITOS_CH_CCCR_HI_CDWE	0x10	/* Channel done writeback enable bit */
+#define TALITOS_CH_CCCR_HI_NT	0x4	/* Notification type bit */
+#define TALITOS_CH_CCCR_HI_CDIE	0x2	/* Channel Done Interrupt Enable bit */
+#define TALITOS_CH_CCPSR	0x1110	/* Crypto-Channel Pointer Status Reg */
+#define TALITOS_CH_CCPSR_HI	0x1114	/* Crypto-Channel Pointer Status Reg */
+#define TALITOS_CH_FF		0x1148	/* Fetch FIFO */
+#define TALITOS_CH_FF_HI	0x114c	/* Fetch FIFO's FETCH_ADRS */
+#define TALITOS_CH_CDPR		0x1140	/* Crypto-Channel Pointer Status Reg */
+#define TALITOS_CH_CDPR_HI	0x1144	/* Crypto-Channel Pointer Status Reg */
+#define TALITOS_CH_DESCBUF	0x1180	/* (thru 11bf) Crypto-Channel 
+					 * Descriptor Buffer (debug) */
+
+/* execution unit register offset addresses and bits */
+#define TALITOS_DEUSR		0x2028	/* DEU status register */
+#define TALITOS_DEUSR_HI	0x202c	/* DEU status register */
+#define TALITOS_DEUISR		0x2030	/* DEU interrupt status register */
+#define TALITOS_DEUISR_HI	0x2034	/* DEU interrupt status register */
+#define TALITOS_DEUICR		0x2038	/* DEU interrupt control register */
+#define TALITOS_DEUICR_HI	0x203c	/* DEU interrupt control register */
+#define TALITOS_AESUISR		0x4030	/* AESU interrupt status register */
+#define TALITOS_AESUISR_HI	0x4034	/* AESU interrupt status register */
+#define TALITOS_AESUICR		0x4038	/* AESU interrupt control register */
+#define TALITOS_AESUICR_HI	0x403c	/* AESU interrupt control register */
+#define TALITOS_MDEUISR		0x6030	/* MDEU interrupt status register */
+#define TALITOS_MDEUISR_HI	0x6034	/* MDEU interrupt status register */
+#define TALITOS_RNGSR		0xa028	/* RNG status register */
+#define TALITOS_RNGSR_HI	0xa02c	/* RNG status register */
+#define TALITOS_RNGSR_HI_RD	0x1	/* RNG Reset done */
+#define TALITOS_RNGSR_HI_OFL	0xff0000/* number of dwords in RNG output FIFO*/
+#define TALITOS_RNGDSR		0xa010	/* RNG data size register */
+#define TALITOS_RNGDSR_HI	0xa014	/* RNG data size register */
+#define TALITOS_RNG_FIFO	0xa800	/* RNG FIFO - pool of random numbers */
+#define TALITOS_RNGISR		0xa030	/* RNG Interrupt status register */
+#define TALITOS_RNGISR_HI	0xa034	/* RNG Interrupt status register */
+#define TALITOS_RNGRCR		0xa018	/* RNG Reset control register */
+#define TALITOS_RNGRCR_HI	0xa01c	/* RNG Reset control register */
+#define TALITOS_RNGRCR_HI_SR	0x1	/* RNG RNGRCR:Software Reset */
+
+/* descriptor pointer entry */
+struct talitos_desc_ptr {
+	u16	len;		/* length */
+	u8	extent;		/* jump (to s/g link table) and extent */
+	u8	res;		/* reserved */
+	u32	ptr;		/* pointer */
+};
+
+/* descriptor */
+struct talitos_desc {
+	u32	hdr;				/* header */
+	u32	res;				/* reserved */
+	struct talitos_desc_ptr		ptr[7];	/* ptr/len pair array */
+};
+
+/* talitos descriptor header (hdr) bits */
+
+/* primary execution unit select */
+#define	TALITOS_SEL0_AFEU	0x10000000
+#define	TALITOS_SEL0_DEU	0x20000000
+#define	TALITOS_SEL0_MDEU	0x30000000
+#define	TALITOS_SEL0_RNG	0x40000000
+#define	TALITOS_SEL0_PKEU	0x50000000
+#define	TALITOS_SEL0_AESU	0x60000000
+
+/* primary execution unit mode (MODE0) and derivatives */
+#define	TALITOS_MODE0_AESU_CBC		0x00200000
+#define	TALITOS_MODE0_AESU_ENC		0x00100000
+#define	TALITOS_MODE0_DEU_CBC		0x00400000
+#define	TALITOS_MODE0_DEU_3DES		0x00200000
+#define	TALITOS_MODE0_DEU_ENC		0x00100000
+#define	TALITOS_MODE0_MDEU_INIT		0x01000000	/* init starting regs */
+#define	TALITOS_MODE0_MDEU_HMAC		0x00800000
+#define	TALITOS_MODE0_MDEU_PAD		0x00400000	/* PD */
+#define	TALITOS_MODE0_MDEU_MD5		0x00200000
+#define	TALITOS_MODE0_MDEU_SHA256	0x00100000
+#define	TALITOS_MODE0_MDEU_SHA1		0x00000000	/* SHA-160 */
+#define	TALITOS_MODE0_MDEU_MD5_HMAC	\
+		(TALITOS_MODE0_MDEU_MD5 | TALITOS_MODE0_MDEU_HMAC)
+#define	TALITOS_MODE0_MDEU_SHA256_HMAC	\
+		(TALITOS_MODE0_MDEU_SHA256 | TALITOS_MODE0_MDEU_HMAC)
+#define	TALITOS_MODE0_MDEU_SHA1_HMAC	\
+		(TALITOS_MODE0_MDEU_SHA1 | TALITOS_MODE0_MDEU_HMAC)
+
+/* secondary execution unit select (SEL1) */
+/* it's MDEU or nothing */
+#define	TALITOS_SEL1_MDEU	0x00030000
+
+/* secondary execution unit mode (MODE1) and derivatives */
+#define	TALITOS_MODE1_MDEU_INIT		0x00001000	/* init starting regs */
+#define	TALITOS_MODE1_MDEU_HMAC		0x00000800
+#define	TALITOS_MODE1_MDEU_PAD		0x00000400	/* PD */
+#define	TALITOS_MODE1_MDEU_MD5		0x00000200
+#define	TALITOS_MODE1_MDEU_SHA256	0x00000100
+#define	TALITOS_MODE1_MDEU_SHA1		0x00000000	/* SHA-160 */
+#define	TALITOS_MODE1_MDEU_MD5_HMAC	\
+	(TALITOS_MODE1_MDEU_MD5 | TALITOS_MODE1_MDEU_HMAC)
+#define	TALITOS_MODE1_MDEU_SHA256_HMAC	\
+	(TALITOS_MODE1_MDEU_SHA256 | TALITOS_MODE1_MDEU_HMAC)
+#define	TALITOS_MODE1_MDEU_SHA1_HMAC	\
+	(TALITOS_MODE1_MDEU_SHA1 | TALITOS_MODE1_MDEU_HMAC)
+
+/* direction of overall data flow (DIR) */
+#define	TALITOS_DIR_OUTBOUND	0x00000000
+#define	TALITOS_DIR_INBOUND	0x00000002
+
+/* done notification (DN) */
+#define	TALITOS_DONE_NOTIFY	0x00000001
+
+/* descriptor types */
+/* odd numbers here are valid on SEC2 and greater only (e.g. ipsec_esp) */
+#define TD_TYPE_AESU_CTR_NONSNOOP	(0 << 3)
+#define TD_TYPE_IPSEC_ESP		(1 << 3)
+#define TD_TYPE_COMMON_NONSNOOP_NO_AFEU	(2 << 3)
+#define TD_TYPE_HMAC_SNOOP_NO_AFEU	(4 << 3)
+
+#define TALITOS_HDR_DONE_BITS	0xff000000
+
+#define	DPRINTF(a...)	do { \
+						if (debug) { \
+							printk("%s: ", sc ? \
+								device_get_nameunit(sc->sc_cdev) : "talitos"); \
+							printk(a); \
+						} \
+					} while (0)
diff --git a/target/linux/generic/files/crypto/ocf/talitos/talitos_soft.h b/target/linux/generic/files/crypto/ocf/talitos/talitos_soft.h
new file mode 100644
index 0000000000..79efdbd314
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/talitos/talitos_soft.h
@@ -0,0 +1,77 @@
+/*
+ * Freescale SEC data structures for integration with ocf-linux
+ *
+ * Copyright (c) 2006 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * paired descriptor and associated crypto operation
+ */
+struct desc_cryptop_pair {
+	struct talitos_desc	cf_desc;	/* descriptor ptr */
+	struct cryptop		*cf_crp;	/* cryptop ptr */
+};
+
+/*
+ * Holds data specific to a single talitos device.
+ */
+struct talitos_softc {
+	softc_device_decl	sc_cdev;
+	struct platform_device	*sc_dev;	/* device backpointer */
+	ocf_iomem_t		sc_base_addr;
+	int			sc_irq;
+	int			sc_num;		/* if we have multiple chips */
+	int32_t			sc_cid;		/* crypto tag */
+	u64			sc_chiprev;	/* major/minor chip revision */
+	int			sc_nsessions;
+	struct talitos_session	*sc_sessions;
+	int			sc_num_channels;/* number of crypto channels */
+	int			sc_chfifo_len;	/* channel fetch fifo len */
+	int			sc_exec_units;	/* execution units mask */
+	int			sc_desc_types;	/* descriptor types mask */
+	/*
+	 * mutual exclusion for intra-channel resources, e.g. fetch fifos
+	 * the last entry is a meta-channel lock used by the channel scheduler
+	 */
+	spinlock_t		*sc_chnfifolock;
+	/* sc_chnlastalgo contains last algorithm for that channel */
+	int			*sc_chnlastalg;
+	/* sc_chnfifo holds pending descriptor--crypto operation pairs */
+	struct desc_cryptop_pair	**sc_chnfifo;
+};
+
+struct talitos_session {
+	u_int32_t	ses_used;
+	u_int32_t	ses_klen;		/* key length in bits */
+	u_int32_t	ses_key[8];		/* DES/3DES/AES key */
+	u_int32_t	ses_hmac[5];		/* hmac inner state */
+	u_int32_t	ses_hmac_len;		/* hmac length */
+	u_int32_t	ses_iv[4];		/* DES/3DES/AES iv */
+	u_int32_t	ses_mlen;		/* desired hash result len (12=ipsec or 16) */
+};
+
+#define	TALITOS_SESSION(sid)	((sid) & 0x0fffffff)
+#define	TALITOS_SID(crd, sesn)	(((crd) << 28) | ((sesn) & 0x0fffffff))
diff --git a/target/linux/generic/files/crypto/ocf/uio.h b/target/linux/generic/files/crypto/ocf/uio.h
new file mode 100644
index 0000000000..03a62491fa
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/uio.h
@@ -0,0 +1,54 @@
+#ifndef _OCF_UIO_H_
+#define _OCF_UIO_H_
+
+#include <linux/uio.h>
+
+/*
+ * The linux uio.h doesn't have all we need.  To be fully api compatible
+ * with the BSD cryptodev,  we need to keep this around.  Perhaps this can
+ * be moved back into the linux/uio.h
+ *
+ * Linux port done by David McCullough <david_mccullough@mcafee.com>
+ * Copyright (C) 2006-2010 David McCullough
+ * Copyright (C) 2004-2005 Intel Corporation.
+ *
+ * LICENSE TERMS
+ *
+ * The free distribution and use of this software in both source and binary
+ * form is allowed (with or without changes) provided that:
+ *
+ *   1. distributions of this source code include the above copyright
+ *      notice, this list of conditions and the following disclaimer;
+ *
+ *   2. distributions in binary form include the above copyright
+ *      notice, this list of conditions and the following disclaimer
+ *      in the documentation and/or other associated materials;
+ *
+ *   3. the copyright holder's name is not used to endorse products
+ *      built using this software without specific written permission.
+ *
+ * ALTERNATIVELY, provided that this notice is retained in full, this product
+ * may be distributed under the terms of the GNU General Public License (GPL),
+ * in which case the provisions of the GPL apply INSTEAD OF those given above.
+ *
+ * DISCLAIMER
+ *
+ * This software is provided 'as is' with no explicit or implied warranties
+ * in respect of its properties, including, but not limited to, correctness
+ * and/or fitness for purpose.
+ * ---------------------------------------------------------------------------
+ */
+
+struct uio {
+	struct	iovec *uio_iov;
+	int		uio_iovcnt;
+	off_t	uio_offset;
+	int		uio_resid;
+#if 0
+	enum	uio_seg uio_segflg;
+	enum	uio_rw uio_rw;
+	struct  thread *uio_td;
+#endif
+};
+
+#endif
diff --git a/target/linux/generic/files/drivers/char/gpio_dev.c b/target/linux/generic/files/drivers/char/gpio_dev.c
new file mode 100644
index 0000000000..e6d5b1d05e
--- /dev/null
+++ b/target/linux/generic/files/drivers/char/gpio_dev.c
@@ -0,0 +1,179 @@
+/*
+ * character device wrapper for generic gpio layer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA02111-1307USA
+ *
+ * Feedback, Bugs...  blogic@openwrt.org
+ *
+ * dpg 20100106
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/atomic.h>
+#include <linux/init.h>
+#include <linux/genhd.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_dev.h>
+
+#define DRVNAME		"gpiodev"
+#define DEVNAME		"gpio"
+
+static int dev_major;
+static struct class *gpiodev_class;
+
+
+/* third argument of user space ioctl ('arg' here) contains the <pin> */
+static int
+gpio_ioctl(struct inode * inode, struct file * file, unsigned int cmd,
+	   unsigned long arg)
+{
+	int retval = 0;
+
+	switch (cmd)
+	{
+	case GPIO_GET:
+		retval = gpio_get_value(arg);
+		break;
+	case GPIO_SET:
+		gpio_set_value(arg, 1);
+		break;
+	case GPIO_CLEAR:
+		gpio_set_value(arg, 0);
+		break;
+	case GPIO_DIR_IN:
+		retval = gpio_direction_input(arg);
+		break;
+	case GPIO_DIR_OUT:
+		retval = gpio_direction_output(arg, 0);
+		break;
+	case GPIO_DIR_HIGH:
+		retval = gpio_direction_output(arg, 1);
+		break;
+	case GPIO_REQUEST:
+		/* should be first ioctl operation on <pin> */
+		retval = gpio_request(arg, DRVNAME);
+		break;
+	case GPIO_FREE:
+		/* should be last ioctl operation on <pin> */
+		/* may be needed first if previous user missed this ioctl */
+		gpio_free(arg);
+		break;
+	case GPIO_CAN_SLEEP:
+		retval = gpio_cansleep(arg);
+		break;
+	default:
+		retval = -EINVAL;
+		/* = -ENOTTY; // correct return but ... */
+		break;
+	}
+	return retval;
+}
+
+/* Allow co-incident opens */
+static int
+gpio_open(struct inode *inode, struct file *file)
+{
+	int result = 0;
+	unsigned int dev_minor = MINOR(inode->i_rdev);
+
+	if (dev_minor != 0)
+	{
+		printk(KERN_ERR DRVNAME ": trying to access unknown minor device -> %d\n", dev_minor);
+		result = -ENODEV;
+		goto out;
+	}
+out:
+	return result;
+}
+
+static int
+gpio_close(struct inode * inode, struct file * file)
+{
+	/* could track all <pin>s requested by this fd and gpio_free()
+         * them here
+	 */
+	return 0;
+}
+
+struct file_operations gpio_fops = {
+	ioctl:		gpio_ioctl,
+	open:		gpio_open,
+	release:	gpio_close
+};
+
+static int
+gpio_probe(struct platform_device *dev)
+{
+	int result = 0;
+
+	dev_major = register_chrdev(0, DEVNAME, &gpio_fops);
+	if (!dev_major)
+	{
+		printk(KERN_ERR DRVNAME ": Error whilst opening %s \n", DEVNAME);
+		result = -ENODEV;
+		goto out;
+	}
+	gpiodev_class = class_create(THIS_MODULE, DRVNAME);
+	device_create(gpiodev_class, NULL, MKDEV(dev_major, 0), dev, DEVNAME);
+	printk(KERN_INFO DRVNAME ": gpio device registered with major %d\n", dev_major);
+out:
+	return result;
+}
+
+static int
+gpio_remove(struct platform_device *dev)
+{
+	unregister_chrdev(dev_major, DEVNAME);
+	return 0;
+}
+
+static struct
+platform_driver gpio_driver = {
+	.probe = gpio_probe,
+	.remove = gpio_remove,
+	.driver = {
+		.name = "GPIODEV",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init
+gpio_mod_init(void)
+{
+	int ret = platform_driver_register(&gpio_driver);
+	if (ret)
+		printk(KERN_INFO DRVNAME ": Error registering platfom driver!\n");
+
+	return ret;
+}
+
+static void __exit
+gpio_mod_exit(void)
+{
+	platform_driver_unregister(&gpio_driver);
+}
+
+module_init (gpio_mod_init);
+module_exit (gpio_mod_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Crispin / OpenWrt +");
+MODULE_DESCRIPTION("Character device for for generic gpio api");
diff --git a/target/linux/generic/files/drivers/input/misc/gpio_buttons.c b/target/linux/generic/files/drivers/input/misc/gpio_buttons.c
new file mode 100644
index 0000000000..eb0e30161d
--- /dev/null
+++ b/target/linux/generic/files/drivers/input/misc/gpio_buttons.c
@@ -0,0 +1,216 @@
+/*
+ *  Driver for buttons on GPIO lines not capable of generating interrupts
+ *
+ *  Copyright (C) 2007-2010 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2010 Nuno Goncalves <nunojpg@gmail.com>
+ *
+ *  This file was based on: /drivers/input/misc/cobalt_btns.c
+ *	Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  also was based on: /drivers/input/keyboard/gpio_keys.c
+ *	Copyright 2005 Phil Blundell
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+
+#include <linux/input.h>
+#include <linux/input-polldev.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
+#include <linux/gpio_buttons.h>
+
+#include <asm/gpio.h>
+
+#define DRV_NAME	"gpio-buttons"
+#define DRV_VERSION	"0.1.2"
+#define PFX		DRV_NAME ": "
+
+struct gpio_button_data {
+	int last_state;
+	int count;
+};
+
+struct gpio_buttons_dev {
+	struct input_polled_dev *poll_dev;
+	struct gpio_buttons_platform_data *pdata;
+	struct gpio_button_data *data;
+};
+
+static void gpio_buttons_poll(struct input_polled_dev *dev)
+{
+	struct gpio_buttons_dev *bdev = dev->private;
+	struct gpio_buttons_platform_data *pdata = bdev->pdata;
+	struct input_dev *input = dev->input;
+	int i;
+
+	for (i = 0; i < bdev->pdata->nbuttons; i++) {
+		struct gpio_button *button = &pdata->buttons[i];
+		unsigned int type = button->type ?: EV_KEY;
+		int state;
+
+		if (bdev->data[i].count < button->threshold) {
+			bdev->data[i].count++;
+			continue;
+		}
+
+		state = gpio_get_value(button->gpio) ? 1 : 0;
+		if (state != bdev->data[i].last_state) {
+			input_event(input, type, button->code,
+				    !!(state ^ button->active_low));
+			input_sync(input);
+			bdev->data[i].count = 0;
+			bdev->data[i].last_state = state;
+		}
+	}
+}
+
+static int __devinit gpio_buttons_probe(struct platform_device *pdev)
+{
+	struct gpio_buttons_platform_data *pdata = pdev->dev.platform_data;
+	struct gpio_buttons_dev *bdev;
+	struct input_polled_dev *poll_dev;
+	struct input_dev *input;
+	int error, i;
+
+	if (!pdata)
+		return -ENXIO;
+
+	bdev = kzalloc(sizeof(struct gpio_buttons_dev) +
+		       sizeof(struct gpio_button_data) * pdata->nbuttons,
+		       GFP_KERNEL);
+	if (!bdev) {
+		printk(KERN_ERR DRV_NAME "no memory for device\n");
+		return -ENOMEM;
+	}
+
+	bdev->data = (struct gpio_button_data *) &bdev[1];
+
+	poll_dev = input_allocate_polled_device();
+	if (!poll_dev) {
+		printk(KERN_ERR DRV_NAME "no memory for polled device\n");
+		error = -ENOMEM;
+		goto err_free_bdev;
+	}
+
+	poll_dev->private = bdev;
+	poll_dev->poll = gpio_buttons_poll;
+	poll_dev->poll_interval = pdata->poll_interval;
+
+	input = poll_dev->input;
+
+	input->evbit[0] = BIT(EV_KEY);
+	input->name = pdev->name;
+	input->phys = "gpio-buttons/input0";
+	input->dev.parent = &pdev->dev;
+
+	input->id.bustype = BUS_HOST;
+	input->id.vendor = 0x0001;
+	input->id.product = 0x0001;
+	input->id.version = 0x0100;
+
+	for (i = 0; i < pdata->nbuttons; i++) {
+		struct gpio_button *button = &pdata->buttons[i];
+		unsigned int gpio = button->gpio;
+		unsigned int type = button->type ?: EV_KEY;
+
+		error = gpio_request(gpio, button->desc ?
+				button->desc : DRV_NAME);
+		if (error) {
+			printk(KERN_ERR PFX "unable to claim gpio %u, "
+				"error %d\n", gpio, error);
+			goto err_free_gpio;
+		}
+
+		error = gpio_direction_input(gpio);
+		if (error) {
+			printk(KERN_ERR PFX "unable to set direction on "
+				"gpio %u, error %d\n", gpio, error);
+			goto err_free_gpio;
+		}
+
+		input_set_capability(input, type, button->code);
+		bdev->data[i].last_state = gpio_get_value(button->gpio) ? 1 : 0;
+	}
+
+	bdev->poll_dev = poll_dev;
+	bdev->pdata = pdata;
+	platform_set_drvdata(pdev, bdev);
+
+	error = input_register_polled_device(poll_dev);
+	if (error) {
+		printk(KERN_ERR PFX "unable to register polled device, "
+			"error %d\n", error);
+		goto err_free_gpio;
+	}
+
+	return 0;
+
+err_free_gpio:
+	for (i = i - 1; i >= 0; i--)
+		gpio_free(pdata->buttons[i].gpio);
+
+	input_free_polled_device(poll_dev);
+
+err_free_bdev:
+	kfree(bdev);
+
+	platform_set_drvdata(pdev, NULL);
+	return error;
+}
+
+static int __devexit gpio_buttons_remove(struct platform_device *pdev)
+{
+	struct gpio_buttons_dev *bdev = platform_get_drvdata(pdev);
+	struct gpio_buttons_platform_data *pdata = bdev->pdata;
+	int i;
+
+	input_unregister_polled_device(bdev->poll_dev);
+
+	for (i = 0; i < pdata->nbuttons; i++)
+		gpio_free(pdata->buttons[i].gpio);
+
+	input_free_polled_device(bdev->poll_dev);
+
+	kfree(bdev);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver gpio_buttons_driver = {
+	.probe	= gpio_buttons_probe,
+	.remove	= __devexit_p(gpio_buttons_remove),
+	.driver	= {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init gpio_buttons_init(void)
+{
+	printk(KERN_INFO DRV_NAME " driver version " DRV_VERSION "\n");
+	return platform_driver_register(&gpio_buttons_driver);
+}
+
+static void __exit gpio_buttons_exit(void)
+{
+	platform_driver_unregister(&gpio_buttons_driver);
+}
+
+module_init(gpio_buttons_init);
+module_exit(gpio_buttons_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
+MODULE_VERSION(DRV_VERSION);
+MODULE_DESCRIPTION("Polled buttons driver for CPU GPIOs");
+
diff --git a/target/linux/generic/files/drivers/leds/ledtrig-morse.c b/target/linux/generic/files/drivers/leds/ledtrig-morse.c
new file mode 100644
index 0000000000..bc58afe4c6
--- /dev/null
+++ b/target/linux/generic/files/drivers/leds/ledtrig-morse.c
@@ -0,0 +1,366 @@
+/*
+ *  LED Morse Trigger
+ *
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This file was based on: drivers/led/ledtrig-timer.c
+ *	Copyright 2005-2006 Openedhand Ltd.
+ *	Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ *  also based on the patch '[PATCH] 2.5.59 morse code panics' posted
+ *  in the LKML by Tomas Szepe at Thu, 30 Jan 2003
+ *	Copyright (C) 2002 Andrew Rodland <arodland@noln.com>
+ *	Copyright (C) 2003 Tomas Szepe <szepe@pinerecords.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+#include <linux/timer.h>
+#include <linux/ctype.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
+
+#include "leds.h"
+
+#define MORSE_DELAY_BASE	(HZ/2)
+
+#define MORSE_STATE_BLINK_START	0
+#define MORSE_STATE_BLINK_STOP	1
+
+#define MORSE_DIT_LEN	1
+#define MORSE_DAH_LEN	3
+#define MORSE_SPACE_LEN	7
+
+struct morse_trig_data {
+	unsigned long delay;
+	char *msg;
+
+	unsigned char morse;
+	unsigned char state;
+	char *msgpos;
+	struct timer_list timer;
+};
+
+const unsigned char morsetable[] = {
+	0122, 0, 0310, 0, 0, 0163,				/* "#$%&' */
+	055, 0155, 0, 0, 0163, 0141, 0152, 0051, 		/* ()*+,-./ */
+	077, 076, 074, 070, 060, 040, 041, 043, 047, 057,	/* 0-9 */
+	0107, 0125, 0, 0061, 0, 0114, 0, 			/* :;<=>?@ */
+	006, 021, 025, 011, 002, 024, 013, 020, 004,		/* A-I */
+	036, 015, 022, 007, 005, 017, 026, 033, 012,		/* J-R */
+	010, 003, 014, 030, 016, 031, 035, 023,			/* S-Z */
+	0, 0, 0, 0, 0154					/* [\]^_ */
+};
+
+static inline unsigned char tomorse(char c) {
+	if (c >= 'a' && c <= 'z')
+		c = c - 'a' + 'A';
+	if (c >= '"' && c <= '_') {
+		return morsetable[c - '"'];
+	} else
+		return 0;
+}
+
+static inline unsigned long dit_len(struct morse_trig_data *morse_data)
+{
+	return MORSE_DIT_LEN*morse_data->delay;
+}
+
+static inline unsigned long dah_len(struct morse_trig_data *morse_data)
+{
+	return MORSE_DAH_LEN*morse_data->delay;
+}
+
+static inline unsigned long space_len(struct morse_trig_data *morse_data)
+{
+	return MORSE_SPACE_LEN*morse_data->delay;
+}
+
+static void morse_timer_function(unsigned long data)
+{
+	struct led_classdev *led_cdev = (struct led_classdev *)data;
+	struct morse_trig_data *morse_data = led_cdev->trigger_data;
+	unsigned long brightness = LED_OFF;
+	unsigned long delay = 0;
+
+	if (!morse_data->msg)
+		goto set_led;
+
+	switch (morse_data->state) {
+	case MORSE_STATE_BLINK_START:
+		/* Starting a new blink.  We have a valid code in morse. */
+		delay = (morse_data->morse & 001) ? dah_len(morse_data):
+			dit_len(morse_data);
+		brightness = LED_FULL;
+		morse_data->state = MORSE_STATE_BLINK_STOP;
+		morse_data->morse >>= 1;
+		break;
+	case MORSE_STATE_BLINK_STOP:
+		/* Coming off of a blink. */
+		morse_data->state = MORSE_STATE_BLINK_START;
+
+		if (morse_data->morse > 1) {
+			/* Not done yet, just a one-dit pause. */
+			delay = dit_len(morse_data);
+			break;
+		}
+
+		/* Get a new char, figure out how much space. */
+		/* First time through */
+		if (!morse_data->msgpos)
+			morse_data->msgpos = (char *)morse_data->msg;
+
+		if (!*morse_data->msgpos) {
+			/* Repeating */
+			morse_data->msgpos = (char *)morse_data->msg;
+			delay = space_len(morse_data);
+		} else {
+			/* Inter-letter space */
+			delay = dah_len(morse_data);
+		}
+
+		if (!(morse_data->morse = tomorse(*morse_data->msgpos))) {
+			delay = space_len(morse_data);
+			/* And get us back here */
+			morse_data->state = MORSE_STATE_BLINK_STOP;
+		}
+		morse_data->msgpos++;
+		break;
+	}
+
+	mod_timer(&morse_data->timer, jiffies + msecs_to_jiffies(delay));
+
+set_led:
+	led_set_brightness(led_cdev, brightness);
+}
+
+static ssize_t _morse_delay_show(struct led_classdev *led_cdev, char *buf)
+{
+	struct morse_trig_data *morse_data = led_cdev->trigger_data;
+
+	sprintf(buf, "%lu\n", morse_data->delay);
+
+	return strlen(buf) + 1;
+}
+
+static ssize_t _morse_delay_store(struct led_classdev *led_cdev,
+		const char *buf, size_t size)
+{
+	struct morse_trig_data *morse_data = led_cdev->trigger_data;
+	char *after;
+	unsigned long state = simple_strtoul(buf, &after, 10);
+	size_t count = after - buf;
+	int ret = -EINVAL;
+
+	if (*after && isspace(*after))
+		count++;
+
+	if (count == size) {
+		morse_data->delay = state;
+		mod_timer(&morse_data->timer, jiffies + 1);
+		ret = count;
+	}
+
+	return ret;
+}
+
+static ssize_t _morse_msg_show(struct led_classdev *led_cdev, char *buf)
+{
+	struct morse_trig_data *morse_data = led_cdev->trigger_data;
+
+	if (!morse_data->msg)
+		sprintf(buf, "<none>\n");
+	else
+		sprintf(buf, "%s\n", morse_data->msg);
+
+	return strlen(buf) + 1;
+}
+
+static ssize_t _morse_msg_store(struct led_classdev *led_cdev,
+		const char *buf, size_t size)
+{
+	struct morse_trig_data *morse_data = led_cdev->trigger_data;
+	char *m;
+
+	m = kmalloc(size, GFP_KERNEL);
+	if (!m)
+		return -ENOMEM;
+
+	memcpy(m,buf,size);
+	m[size]='\0';
+
+	if (morse_data->msg)
+		kfree(morse_data->msg);
+
+	morse_data->msg = m;
+	morse_data->msgpos = NULL;
+	morse_data->state = MORSE_STATE_BLINK_STOP;
+
+	mod_timer(&morse_data->timer, jiffies + 1);
+
+	return size;
+}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23)
+static ssize_t morse_delay_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+	return _morse_delay_show(led_cdev, buf);
+}
+
+static ssize_t morse_delay_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+	return _morse_delay_store(led_cdev, buf, size);
+}
+
+static ssize_t morse_msg_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+	return _morse_msg_show(led_cdev, buf);
+}
+
+static ssize_t morse_msg_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+	return _morse_msg_store(led_cdev, buf, size);
+}
+
+static DEVICE_ATTR(delay, 0644, morse_delay_show, morse_delay_store);
+static DEVICE_ATTR(message, 0644, morse_msg_show, morse_msg_store);
+
+#define led_device_create_file(leddev, attr) \
+	device_create_file(leddev->dev, &dev_attr_ ## attr)
+#define led_device_remove_file(leddev, attr) \
+	device_remove_file(leddev->dev, &dev_attr_ ## attr)
+
+#else
+static ssize_t morse_delay_show(struct class_device *dev, char *buf)
+{
+	struct led_classdev *led_cdev = class_get_devdata(dev);
+
+	return _morse_delay_show(led_cdev, buf);
+}
+
+static ssize_t morse_delay_store(struct class_device *dev, const char *buf,
+		size_t size)
+{
+	struct led_classdev *led_cdev = class_get_devdata(dev);
+
+	return _morse_delay_store(led_cdev, buf, size);
+}
+
+static ssize_t morse_msg_show(struct class_device *dev, char *buf)
+{
+	struct led_classdev *led_cdev = class_get_devdata(dev);
+
+	return _morse_msg_show(led_cdev, buf);
+}
+
+static ssize_t morse_msg_store(struct class_device *dev, const char *buf,
+				size_t size)
+{
+	struct led_classdev *led_cdev = class_get_devdata(dev);
+
+	return _morse_msg_store(led_cdev, buf, size);
+}
+
+static CLASS_DEVICE_ATTR(delay, 0644, morse_delay_show, morse_delay_store);
+static CLASS_DEVICE_ATTR(message, 0644, morse_msg_show, morse_msg_store);
+
+#define led_device_create_file(leddev, attr) \
+	class_device_create_file(leddev->class_dev, &class_device_attr_ ## attr)
+#define led_device_remove_file(leddev, attr) \
+	class_device_remove_file(leddev->class_dev, &class_device_attr_ ## attr)
+
+#endif
+
+static void morse_trig_activate(struct led_classdev *led_cdev)
+{
+	struct morse_trig_data *morse_data;
+	int rc;
+
+	morse_data = kzalloc(sizeof(*morse_data), GFP_KERNEL);
+	if (!morse_data)
+		return;
+
+	morse_data->delay = MORSE_DELAY_BASE;
+	init_timer(&morse_data->timer);
+	morse_data->timer.function = morse_timer_function;
+	morse_data->timer.data = (unsigned long)led_cdev;
+
+	rc = led_device_create_file(led_cdev, delay);
+	if (rc) goto err;
+
+	rc = led_device_create_file(led_cdev, message);
+	if (rc) goto err_delay;
+
+	led_cdev->trigger_data = morse_data;
+
+	return;
+
+err_delay:
+	led_device_remove_file(led_cdev, delay);
+err:
+	kfree(morse_data);
+}
+
+static void morse_trig_deactivate(struct led_classdev *led_cdev)
+{
+	struct morse_trig_data *morse_data = led_cdev->trigger_data;
+
+	if (!morse_data)
+		return;
+
+	led_device_remove_file(led_cdev, message);
+	led_device_remove_file(led_cdev, delay);
+
+	del_timer_sync(&morse_data->timer);
+	if (morse_data->msg)
+		kfree(morse_data->msg);
+
+	kfree(morse_data);
+}
+
+static struct led_trigger morse_led_trigger = {
+	.name		= "morse",
+	.activate	= morse_trig_activate,
+	.deactivate	= morse_trig_deactivate,
+};
+
+static int __init morse_trig_init(void)
+{
+	return led_trigger_register(&morse_led_trigger);
+}
+
+static void __exit morse_trig_exit(void)
+{
+	led_trigger_unregister(&morse_led_trigger);
+}
+
+module_init(morse_trig_init);
+module_exit(morse_trig_exit);
+
+MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
+MODULE_DESCRIPTION("Morse LED trigger");
+MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/files/drivers/leds/ledtrig-netdev.c b/target/linux/generic/files/drivers/leds/ledtrig-netdev.c
new file mode 100644
index 0000000000..8dba8e654d
--- /dev/null
+++ b/target/linux/generic/files/drivers/leds/ledtrig-netdev.c
@@ -0,0 +1,451 @@
+/*
+ * LED Kernel Netdev Trigger
+ *
+ * Toggles the LED to reflect the link and traffic state of a named net device
+ *
+ * Copyright 2007 Oliver Jowett <oliver@opencloud.com>
+ *
+ * Derived from ledtrig-timer.c which is:
+ *  Copyright 2005-2006 Openedhand Ltd.
+ *  Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+#include <linux/netdevice.h>
+#include <linux/timer.h>
+#include <linux/ctype.h>
+#include <linux/leds.h>
+#include <linux/version.h>
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26)
+#include <net/net_namespace.h>
+#endif
+
+#include "leds.h"
+
+/*
+ * Configurable sysfs attributes:
+ *
+ * device_name - network device name to monitor
+ *
+ * interval - duration of LED blink, in milliseconds
+ *
+ * mode - either "none" (LED is off) or a space separated list of one or more of:
+ *   link: LED's normal state reflects whether the link is up (has carrier) or not
+ *   tx:   LED blinks on transmitted data
+ *   rx:   LED blinks on receive data
+ *
+ * Some suggestions:
+ *
+ *  Simple link status LED:
+ *  $ echo netdev >someled/trigger
+ *  $ echo eth0 >someled/device_name
+ *  $ echo link >someled/mode
+ *
+ *  Ethernet-style link/activity LED:
+ *  $ echo netdev >someled/trigger
+ *  $ echo eth0 >someled/device_name
+ *  $ echo "link tx rx" >someled/mode
+ *
+ *  Modem-style tx/rx LEDs:
+ *  $ echo netdev >led1/trigger
+ *  $ echo ppp0 >led1/device_name
+ *  $ echo tx >led1/mode
+ *  $ echo netdev >led2/trigger
+ *  $ echo ppp0 >led2/device_name
+ *  $ echo rx >led2/mode
+ *
+ */
+
+#define MODE_LINK 1
+#define MODE_TX   2
+#define MODE_RX   4
+
+struct led_netdev_data {
+	rwlock_t lock;
+
+	struct timer_list timer;
+	struct notifier_block notifier;
+
+	struct led_classdev *led_cdev;
+	struct net_device *net_dev;
+
+	char device_name[IFNAMSIZ];
+	unsigned interval;
+	unsigned mode;
+	unsigned link_up;
+	unsigned last_activity;
+};
+
+static void set_baseline_state(struct led_netdev_data *trigger_data)
+{
+	if ((trigger_data->mode & MODE_LINK) != 0 && trigger_data->link_up)
+		led_set_brightness(trigger_data->led_cdev, LED_FULL);
+	else
+		led_set_brightness(trigger_data->led_cdev, LED_OFF);
+
+	if ((trigger_data->mode & (MODE_TX | MODE_RX)) != 0 && trigger_data->link_up)
+		mod_timer(&trigger_data->timer, jiffies + trigger_data->interval);
+	else
+		del_timer(&trigger_data->timer);
+}
+
+static ssize_t led_device_name_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct led_netdev_data *trigger_data = led_cdev->trigger_data;
+
+	read_lock(&trigger_data->lock);
+	sprintf(buf, "%s\n", trigger_data->device_name);
+	read_unlock(&trigger_data->lock);
+
+	return strlen(buf) + 1;
+}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
+extern struct net init_net;
+#endif
+
+static ssize_t led_device_name_store(struct device *dev,
+				     struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct led_netdev_data *trigger_data = led_cdev->trigger_data;
+
+	if (size < 0 || size >= IFNAMSIZ)
+		return -EINVAL;
+
+	write_lock(&trigger_data->lock);
+
+	strcpy(trigger_data->device_name, buf);
+	if (size > 0 && trigger_data->device_name[size-1] == '\n')
+		trigger_data->device_name[size-1] = 0;
+
+	if (trigger_data->device_name[0] != 0) {
+		/* check for existing device to update from */
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26)
+		trigger_data->net_dev = dev_get_by_name(&init_net, trigger_data->device_name);
+#else
+		trigger_data->net_dev = dev_get_by_name(trigger_data->device_name);
+#endif
+		if (trigger_data->net_dev != NULL)
+			trigger_data->link_up = (dev_get_flags(trigger_data->net_dev) & IFF_LOWER_UP) != 0;
+		set_baseline_state(trigger_data); /* updates LEDs, may start timers */
+	}
+
+	write_unlock(&trigger_data->lock);
+	return size;
+}
+
+static DEVICE_ATTR(device_name, 0644, led_device_name_show, led_device_name_store);
+
+static ssize_t led_mode_show(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct led_netdev_data *trigger_data = led_cdev->trigger_data;
+
+	read_lock(&trigger_data->lock);
+
+	if (trigger_data->mode == 0) {
+		strcpy(buf, "none\n");
+	} else {
+		if (trigger_data->mode & MODE_LINK)
+			strcat(buf, "link ");
+		if (trigger_data->mode & MODE_TX)
+			strcat(buf, "tx ");
+		if (trigger_data->mode & MODE_RX)
+			strcat(buf, "rx ");
+		strcat(buf, "\n");
+	}
+
+	read_unlock(&trigger_data->lock);
+
+	return strlen(buf)+1;
+}
+
+static ssize_t led_mode_store(struct device *dev,
+			      struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct led_netdev_data *trigger_data = led_cdev->trigger_data;
+	char copybuf[1024];
+	int new_mode = -1;
+	char *p, *token;
+
+	/* take a copy since we don't want to trash the inbound buffer when using strsep */
+	strncpy(copybuf, buf, sizeof(copybuf));
+	copybuf[1023] = 0;
+	p = copybuf;
+
+	while ((token = strsep(&p, " \t\n")) != NULL) {
+		if (!*token)
+			continue;
+
+		if (new_mode == -1)
+			new_mode = 0;
+
+		if (!strcmp(token, "none"))
+			new_mode = 0;
+		else if (!strcmp(token, "tx"))
+			new_mode |= MODE_TX;
+		else if (!strcmp(token, "rx"))
+			new_mode |= MODE_RX;
+		else if (!strcmp(token, "link"))
+			new_mode |= MODE_LINK;
+		else
+			return -EINVAL;
+	}
+
+	if (new_mode == -1)
+		return -EINVAL;
+
+	write_lock(&trigger_data->lock);
+	trigger_data->mode = new_mode;
+	set_baseline_state(trigger_data);
+	write_unlock(&trigger_data->lock);
+
+	return size;
+}
+
+static DEVICE_ATTR(mode, 0644, led_mode_show, led_mode_store);
+
+static ssize_t led_interval_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct led_netdev_data *trigger_data = led_cdev->trigger_data;
+
+	read_lock(&trigger_data->lock);
+	sprintf(buf, "%u\n", jiffies_to_msecs(trigger_data->interval));
+	read_unlock(&trigger_data->lock);
+
+	return strlen(buf) + 1;
+}
+
+static ssize_t led_interval_store(struct device *dev,
+				  struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct led_netdev_data *trigger_data = led_cdev->trigger_data;
+	int ret = -EINVAL;
+	char *after;
+	unsigned long value = simple_strtoul(buf, &after, 10);
+	size_t count = after - buf;
+
+	if (*after && isspace(*after))
+		count++;
+
+	/* impose some basic bounds on the timer interval */
+	if (count == size && value >= 5 && value <= 10000) {
+		write_lock(&trigger_data->lock);
+		trigger_data->interval = msecs_to_jiffies(value);
+		set_baseline_state(trigger_data); // resets timer
+		write_unlock(&trigger_data->lock);
+		ret = count;
+	}
+
+	return ret;
+}
+
+static DEVICE_ATTR(interval, 0644, led_interval_show, led_interval_store);
+
+static int netdev_trig_notify(struct notifier_block *nb,
+			      unsigned long evt,
+			      void *dv)
+{
+	struct net_device *dev = dv;
+	struct led_netdev_data *trigger_data = container_of(nb, struct led_netdev_data, notifier);
+
+	if (evt != NETDEV_UP && evt != NETDEV_DOWN && evt != NETDEV_CHANGE && evt != NETDEV_REGISTER && evt != NETDEV_UNREGISTER)
+		return NOTIFY_DONE;
+
+	write_lock(&trigger_data->lock);
+
+	if (strcmp(dev->name, trigger_data->device_name))
+		goto done;
+
+	if (evt == NETDEV_REGISTER) {
+		if (trigger_data->net_dev != NULL)
+			dev_put(trigger_data->net_dev);
+		dev_hold(dev);
+		trigger_data->net_dev = dev;
+		trigger_data->link_up = 0;
+		goto done;
+	}
+
+	if (evt == NETDEV_UNREGISTER && trigger_data->net_dev != NULL) {
+		dev_put(trigger_data->net_dev);
+		trigger_data->net_dev = NULL;
+		goto done;
+	}
+
+	/* UP / DOWN / CHANGE */
+
+	trigger_data->link_up = (evt != NETDEV_DOWN && netif_carrier_ok(dev));
+	set_baseline_state(trigger_data);
+
+done:
+	write_unlock(&trigger_data->lock);
+	return NOTIFY_DONE;
+}
+
+/* here's the real work! */
+static void netdev_trig_timer(unsigned long arg)
+{
+	struct led_netdev_data *trigger_data = (struct led_netdev_data *)arg;
+	const struct net_device_stats *dev_stats;
+	unsigned new_activity;
+
+	write_lock(&trigger_data->lock);
+
+	if (!trigger_data->link_up || !trigger_data->net_dev || (trigger_data->mode & (MODE_TX | MODE_RX)) == 0) {
+		/* we don't need to do timer work, just reflect link state. */
+		led_set_brightness(trigger_data->led_cdev, ((trigger_data->mode & MODE_LINK) != 0 && trigger_data->link_up) ? LED_FULL : LED_OFF);
+		goto no_restart;
+	}
+
+	dev_stats = dev_get_stats(trigger_data->net_dev);
+	new_activity =
+		((trigger_data->mode & MODE_TX) ? dev_stats->tx_packets : 0) +
+		((trigger_data->mode & MODE_RX) ? dev_stats->rx_packets : 0);
+
+	if (trigger_data->mode & MODE_LINK) {
+		/* base state is ON (link present) */
+		/* if there's no link, we don't get this far and the LED is off */
+
+		/* OFF -> ON always */
+		/* ON -> OFF on activity */
+		if (trigger_data->led_cdev->brightness == LED_OFF) {
+			led_set_brightness(trigger_data->led_cdev, LED_FULL);
+		} else if (trigger_data->last_activity != new_activity) {
+			led_set_brightness(trigger_data->led_cdev, LED_OFF);
+		}
+	} else {
+		/* base state is OFF */
+		/* ON -> OFF always */
+		/* OFF -> ON on activity */
+		if (trigger_data->led_cdev->brightness == LED_FULL) {
+			led_set_brightness(trigger_data->led_cdev, LED_OFF);
+		} else if (trigger_data->last_activity != new_activity) {
+			led_set_brightness(trigger_data->led_cdev, LED_FULL);
+		}
+	}
+
+	trigger_data->last_activity = new_activity;
+	mod_timer(&trigger_data->timer, jiffies + trigger_data->interval);
+
+no_restart:
+	write_unlock(&trigger_data->lock);
+}
+
+static void netdev_trig_activate(struct led_classdev *led_cdev)
+{
+	struct led_netdev_data *trigger_data;
+	int rc;
+
+	trigger_data = kzalloc(sizeof(struct led_netdev_data), GFP_KERNEL);
+	if (!trigger_data)
+		return;
+
+	rwlock_init(&trigger_data->lock);
+
+	trigger_data->notifier.notifier_call = netdev_trig_notify;
+	trigger_data->notifier.priority = 10;
+
+	setup_timer(&trigger_data->timer, netdev_trig_timer, (unsigned long) trigger_data);
+
+	trigger_data->led_cdev = led_cdev;
+	trigger_data->net_dev = NULL;
+	trigger_data->device_name[0] = 0;
+
+	trigger_data->mode = 0;
+	trigger_data->interval = msecs_to_jiffies(50);
+	trigger_data->link_up = 0;
+	trigger_data->last_activity = 0;
+
+	led_cdev->trigger_data = trigger_data;
+
+	rc = device_create_file(led_cdev->dev, &dev_attr_device_name);
+	if (rc)
+		goto err_out;
+	rc = device_create_file(led_cdev->dev, &dev_attr_mode);
+	if (rc)
+		goto err_out_device_name;
+	rc = device_create_file(led_cdev->dev, &dev_attr_interval);
+	if (rc)
+		goto err_out_mode;
+
+	register_netdevice_notifier(&trigger_data->notifier);
+	return;
+
+err_out_mode:
+	device_remove_file(led_cdev->dev, &dev_attr_mode);
+err_out_device_name:
+	device_remove_file(led_cdev->dev, &dev_attr_device_name);
+err_out:
+	led_cdev->trigger_data = NULL;
+	kfree(trigger_data);
+}
+
+static void netdev_trig_deactivate(struct led_classdev *led_cdev)
+{
+	struct led_netdev_data *trigger_data = led_cdev->trigger_data;
+
+	if (trigger_data) {
+		unregister_netdevice_notifier(&trigger_data->notifier);
+
+		device_remove_file(led_cdev->dev, &dev_attr_device_name);
+		device_remove_file(led_cdev->dev, &dev_attr_mode);
+		device_remove_file(led_cdev->dev, &dev_attr_interval);
+
+		write_lock(&trigger_data->lock);
+
+		if (trigger_data->net_dev) {
+			dev_put(trigger_data->net_dev);
+			trigger_data->net_dev = NULL;
+		}
+
+		write_unlock(&trigger_data->lock);
+
+		del_timer_sync(&trigger_data->timer);
+
+		kfree(trigger_data);
+	}
+}
+
+static struct led_trigger netdev_led_trigger = {
+	.name     = "netdev",
+	.activate = netdev_trig_activate,
+	.deactivate = netdev_trig_deactivate,
+};
+
+static int __init netdev_trig_init(void)
+{
+	return led_trigger_register(&netdev_led_trigger);
+}
+
+static void __exit netdev_trig_exit(void)
+{
+	led_trigger_unregister(&netdev_led_trigger);
+}
+
+module_init(netdev_trig_init);
+module_exit(netdev_trig_exit);
+
+MODULE_AUTHOR("Oliver Jowett <oliver@opencloud.com>");
+MODULE_DESCRIPTION("Netdev LED trigger");
+MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/files/drivers/mtd/myloader.c b/target/linux/generic/files/drivers/mtd/myloader.c
new file mode 100644
index 0000000000..51c037459f
--- /dev/null
+++ b/target/linux/generic/files/drivers/mtd/myloader.c
@@ -0,0 +1,178 @@
+/*
+ *  Parse MyLoader-style flash partition tables and produce a Linux partition
+ *  array to match.
+ *
+ *  Copyright (C) 2007-2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This file was based on drivers/mtd/redboot.c
+ *  Author: Red Hat, Inc. - David Woodhouse <dwmw2@cambridge.redhat.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/byteorder/generic.h>
+#include <linux/myloader.h>
+
+#define BLOCK_LEN_MIN		0x10000
+#define PART_NAME_LEN		32
+
+struct part_data {
+	struct mylo_partition_table	tab;
+	char names[MYLO_MAX_PARTITIONS][PART_NAME_LEN];
+};
+
+int myloader_parse_partitions(struct mtd_info *master,
+			struct mtd_partition **pparts,
+			unsigned long origin)
+{
+	struct part_data *buf;
+	struct mylo_partition_table *tab;
+	struct mylo_partition *part;
+	struct mtd_partition *mtd_parts;
+	struct mtd_partition *mtd_part;
+	int num_parts;
+	int ret, i;
+	size_t retlen;
+	char *names;
+	unsigned long offset;
+	unsigned long blocklen;
+
+	buf = vmalloc(sizeof(*buf));
+	if (!buf) {
+		return -ENOMEM;
+		goto out;
+	}
+	tab = &buf->tab;
+
+	blocklen = master->erasesize;
+	if (blocklen < BLOCK_LEN_MIN)
+		blocklen = BLOCK_LEN_MIN;
+
+	offset = blocklen;
+
+	/* Find the partition table */
+	for (i = 0; i < 4; i++, offset += blocklen) {
+		printk(KERN_DEBUG "%s: searching for MyLoader partition table"
+				" at offset 0x%lx\n", master->name, offset);
+
+		ret = master->read(master, offset, sizeof(*buf), &retlen,
+					(void *)buf);
+		if (ret)
+			goto out_free_buf;
+
+		if (retlen != sizeof(*buf)) {
+			ret = -EIO;
+			goto out_free_buf;
+		}
+
+		/* Check for Partition Table magic number */
+		if (tab->magic == le32_to_cpu(MYLO_MAGIC_PARTITIONS))
+			break;
+
+	}
+
+	if (tab->magic != le32_to_cpu(MYLO_MAGIC_PARTITIONS)) {
+		printk(KERN_DEBUG "%s: no MyLoader partition table found\n",
+			master->name);
+		ret = 0;
+		goto out_free_buf;
+	}
+
+	/* The MyLoader and the Partition Table is always present */
+	num_parts = 2;
+
+	/* Detect number of used partitions */
+	for (i = 0; i < MYLO_MAX_PARTITIONS; i++) {
+		part = &tab->partitions[i];
+
+		if (le16_to_cpu(part->type) == PARTITION_TYPE_FREE)
+			continue;
+
+		num_parts++;
+	}
+
+	mtd_parts = kzalloc((num_parts * sizeof(*mtd_part) +
+				num_parts * PART_NAME_LEN), GFP_KERNEL);
+
+	if (!mtd_parts) {
+		ret = -ENOMEM;
+		goto out_free_buf;
+	}
+
+	mtd_part = mtd_parts;
+	names = (char *)&mtd_parts[num_parts];
+
+	strncpy(names, "myloader", PART_NAME_LEN);
+	mtd_part->name = names;
+	mtd_part->offset = 0;
+	mtd_part->size = offset;
+	mtd_part->mask_flags = MTD_WRITEABLE;
+	mtd_part++;
+	names += PART_NAME_LEN;
+
+	strncpy(names, "partition_table", PART_NAME_LEN);
+	mtd_part->name = names;
+	mtd_part->offset = offset;
+	mtd_part->size = blocklen;
+	mtd_part->mask_flags = MTD_WRITEABLE;
+	mtd_part++;
+	names += PART_NAME_LEN;
+
+	for (i = 0; i < MYLO_MAX_PARTITIONS; i++) {
+		part = &tab->partitions[i];
+
+		if (le16_to_cpu(part->type) == PARTITION_TYPE_FREE)
+			continue;
+
+		if ((buf->names[i][0]) && (buf->names[i][0] != '\xff'))
+			strncpy(names, buf->names[i], PART_NAME_LEN);
+		else
+			snprintf(names, PART_NAME_LEN, "partition%d", i);
+
+		mtd_part->offset = le32_to_cpu(part->addr);
+		mtd_part->size = le32_to_cpu(part->size);
+		mtd_part->name = names;
+		mtd_part++;
+		names += PART_NAME_LEN;
+	}
+
+	*pparts = mtd_parts;
+	ret = num_parts;
+
+ out_free_buf:
+	vfree(buf);
+ out:
+	return ret;
+}
+
+static struct mtd_part_parser myloader_mtd_parser = {
+	.owner		= THIS_MODULE,
+	.parse_fn	= myloader_parse_partitions,
+	.name		= "MyLoader",
+};
+
+static int __init myloader_mtd_parser_init(void)
+{
+	return register_mtd_parser(&myloader_mtd_parser);
+}
+
+static void __exit myloader_mtd_parser_exit(void)
+{
+	deregister_mtd_parser(&myloader_mtd_parser);
+}
+
+module_init(myloader_mtd_parser_init);
+module_exit(myloader_mtd_parser_exit);
+
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_DESCRIPTION("Parsing code for MyLoader partition tables");
+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/generic/files/drivers/net/phy/adm6996.c b/target/linux/generic/files/drivers/net/phy/adm6996.c
new file mode 100644
index 0000000000..bc40be067a
--- /dev/null
+++ b/target/linux/generic/files/drivers/net/phy/adm6996.c
@@ -0,0 +1,171 @@
+/*
+ * ADM6996 switch driver
+ *
+ * Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of the GNU General Public License v2 as published by the
+ * Free Software Foundation
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include "adm6996.h"
+
+MODULE_DESCRIPTION("Infineon ADM6996 Switch");
+MODULE_AUTHOR("Felix Fietkau");
+MODULE_LICENSE("GPL");
+
+struct adm6996_priv {
+	/* use abstraction for regops, we want to add gpio support in the future */
+	u16 (*read)(struct phy_device *phydev, enum admreg reg);
+	void (*write)(struct phy_device *phydev, enum admreg reg, u16 val);
+};
+
+#define to_adm(_phy) ((struct adm6996_priv *) (_phy)->priv)
+
+
+static inline u16
+r16(struct phy_device *pdev, enum admreg reg)
+{
+	return to_adm(pdev)->read(pdev, reg);
+}
+
+static inline void
+w16(struct phy_device *pdev, enum admreg reg, u16 val)
+{
+	to_adm(pdev)->write(pdev, reg, val);
+}
+
+
+static u16
+adm6996_read_mii_reg(struct phy_device *phydev, enum admreg reg)
+{
+	return phydev->bus->read(phydev->bus, PHYADDR(reg));
+}
+
+static void
+adm6996_write_mii_reg(struct phy_device *phydev, enum admreg reg, u16 val)
+{
+	phydev->bus->write(phydev->bus, PHYADDR(reg), val);
+}
+
+
+static int adm6996_config_init(struct phy_device *pdev)
+{
+	int i;
+
+	printk("%s: ADM6996 PHY driver attached.\n", pdev->attached_dev->name);
+	pdev->supported = ADVERTISED_100baseT_Full;
+	pdev->advertising = ADVERTISED_100baseT_Full;
+
+	/* initialize port and vlan settings */
+	for (i = 0; i < ADM_PHY_PORTS; i++) {
+		w16(pdev, adm_portcfg[i], ADM_PORTCFG_INIT |
+			ADM_PORTCFG_PVID((i == ADM_WAN_PORT) ? 1 : 0));
+	}
+	w16(pdev, adm_portcfg[5], ADM_PORTCFG_CPU);
+
+	/* reset all ports */
+	for (i = 0; i < ADM_PHY_PORTS; i++) {
+		w16(pdev, ADM_PHY_PORT(i), ADM_PHYCFG_INIT);
+	}
+
+	return 0;
+}
+
+static int adm6996_read_status(struct phy_device *phydev)
+{
+	phydev->speed = SPEED_100;
+	phydev->duplex = DUPLEX_FULL;
+	phydev->link = 1;
+	return 0;
+}
+
+static int adm6996_config_aneg(struct phy_device *phydev)
+{
+	return 0;
+}
+
+static int adm6996_fixup(struct phy_device *dev)
+{
+	struct mii_bus *bus = dev->bus;
+	u16 reg;
+
+	/* look for the switch on the bus */
+	reg = bus->read(bus, PHYADDR(ADM_SIG0)) & ADM_SIG0_MASK;
+	if (reg != ADM_SIG0_VAL)
+		return 0;
+
+	reg = bus->read(bus, PHYADDR(ADM_SIG1)) & ADM_SIG1_MASK;
+	if (reg != ADM_SIG1_VAL)
+		return 0;
+
+	dev->phy_id = (ADM_SIG0_VAL << 16) | ADM_SIG1_VAL;
+	return 0;
+}
+
+static int adm6996_probe(struct phy_device *pdev)
+{
+	struct adm6996_priv *priv;
+
+	priv = kzalloc(sizeof(struct adm6996_priv), GFP_KERNEL);
+	if (priv == NULL)
+		return -ENOMEM;
+
+	priv->read = adm6996_read_mii_reg;
+	priv->write = adm6996_write_mii_reg;
+	pdev->priv = priv;
+	return 0;
+}
+
+static void adm6996_remove(struct phy_device *pdev)
+{
+	kfree(pdev->priv);
+}
+
+
+static struct phy_driver adm6996_driver = {
+	.name		= "Infineon ADM6996",
+	.phy_id		= (ADM_SIG0_VAL << 16) | ADM_SIG1_VAL,
+	.phy_id_mask	= 0xffffffff,
+	.features	= PHY_BASIC_FEATURES,
+	.probe		= adm6996_probe,
+	.remove		= adm6996_remove,
+	.config_init	= &adm6996_config_init,
+	.config_aneg	= &adm6996_config_aneg,
+	.read_status	= &adm6996_read_status,
+	.driver		= { .owner = THIS_MODULE,},
+};
+
+static int __init adm6996_init(void)
+{
+	phy_register_fixup_for_id(PHY_ANY_ID, adm6996_fixup);
+	return phy_driver_register(&adm6996_driver);
+}
+
+static void __exit adm6996_exit(void)
+{
+	phy_driver_unregister(&adm6996_driver);
+}
+
+module_init(adm6996_init);
+module_exit(adm6996_exit);
diff --git a/target/linux/generic/files/drivers/net/phy/adm6996.h b/target/linux/generic/files/drivers/net/phy/adm6996.h
new file mode 100644
index 0000000000..e074901517
--- /dev/null
+++ b/target/linux/generic/files/drivers/net/phy/adm6996.h
@@ -0,0 +1,105 @@
+/*
+ * ADM6996 switch driver
+ *
+ * Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of the GNU General Public License v2 as published by the
+ * Free Software Foundation
+ */
+#ifndef __ADM6996_H
+#define __ADM6996_H
+
+#define ADM_PHY_PORTS	5
+#define ADM_CPU_PORT	5
+#define ADM_WAN_PORT	0 /* FIXME: dynamic ? */
+
+enum admreg {
+	ADM_EEPROM_BASE		= 0x0,
+		ADM_P0_CFG		= ADM_EEPROM_BASE + 1,
+		ADM_P1_CFG		= ADM_EEPROM_BASE + 3,
+		ADM_P2_CFG		= ADM_EEPROM_BASE + 5,
+		ADM_P3_CFG		= ADM_EEPROM_BASE + 7,
+		ADM_P4_CFG		= ADM_EEPROM_BASE + 8,
+		ADM_P5_CFG		= ADM_EEPROM_BASE + 9,
+	ADM_EEPROM_EXT_BASE	= 0x40,
+	ADM_COUNTER_BASE	= 0xa0,
+		ADM_SIG0		= ADM_COUNTER_BASE + 0,
+		ADM_SIG1		= ADM_COUNTER_BASE + 1,
+	ADM_PHY_BASE		= 0x200,
+#define ADM_PHY_PORT(n) (ADM_PHY_BASE + (0x20 * n))
+};
+
+/* Chip identification patterns */
+#define	ADM_SIG0_MASK	0xfff0
+#define ADM_SIG0_VAL	0x1020
+#define ADM_SIG1_MASK	0xffff
+#define ADM_SIG1_VAL	0x0007
+
+enum {
+	ADM_PHYCFG_COLTST     = (1 << 7),	/* Enable collision test */
+	ADM_PHYCFG_DPLX       = (1 << 8),	/* Enable full duplex */
+	ADM_PHYCFG_ANEN_RST   = (1 << 9),	/* Restart auto negotiation (self clear) */
+	ADM_PHYCFG_ISO        = (1 << 10),	/* Isolate PHY */
+	ADM_PHYCFG_PDN        = (1 << 11),	/* Power down PHY */
+	ADM_PHYCFG_ANEN       = (1 << 12),	/* Enable auto negotiation */
+	ADM_PHYCFG_SPEED_100  = (1 << 13),	/* Enable 100 Mbit/s */
+	ADM_PHYCFG_LPBK       = (1 << 14),	/* Enable loopback operation */
+	ADM_PHYCFG_RST        = (1 << 15),	/* Reset the port (self clear) */
+	ADM_PHYCFG_INIT = (
+		ADM_PHYCFG_RST |
+		ADM_PHYCFG_SPEED_100 |
+		ADM_PHYCFG_ANEN |
+		ADM_PHYCFG_ANEN_RST
+	)
+};
+
+enum {
+	ADM_PORTCFG_FC        = (1 << 0),	/* Enable 802.x flow control */
+	ADM_PORTCFG_AN        = (1 << 1),	/* Enable auto-negotiation */
+	ADM_PORTCFG_SPEED_100 = (1 << 2),	/* Enable 100 Mbit/s */
+	ADM_PORTCFG_DPLX      = (1 << 3),	/* Enable full duplex */
+	ADM_PORTCFG_OT        = (1 << 4),	/* Output tagged packets */
+	ADM_PORTCFG_PD        = (1 << 5),	/* Port disable */
+	ADM_PORTCFG_TV_PRIO   = (1 << 6),	/* 0 = VLAN based priority
+	                                 	 * 1 = TOS based priority */
+	ADM_PORTCFG_PPE       = (1 << 7),	/* Port based priority enable */
+	ADM_PORTCFG_PP_S      = (1 << 8),	/* Port based priority, 2 bits */
+	ADM_PORTCFG_PVID_BASE = (1 << 10),	/* Primary VLAN id, 4 bits */
+	ADM_PORTCFG_FSE	      = (1 << 14),	/* Fx select enable */
+	ADM_PORTCFG_CAM       = (1 << 15),	/* Crossover Auto MDIX */
+
+	ADM_PORTCFG_INIT = (
+		ADM_PORTCFG_FC |
+		ADM_PORTCFG_AN |
+		ADM_PORTCFG_SPEED_100 |
+		ADM_PORTCFG_DPLX |
+		ADM_PORTCFG_CAM
+	),
+	ADM_PORTCFG_CPU = (
+		ADM_PORTCFG_FC |
+		ADM_PORTCFG_SPEED_100 |
+		ADM_PORTCFG_OT |
+		ADM_PORTCFG_DPLX
+	),
+};
+
+#define ADM_PORTCFG_PPID(N) ((n & 0x3) << 8)
+#define ADM_PORTCFG_PVID(n) ((n & 0xf) << 10)
+
+static const u8 adm_portcfg[] = {
+	[0] = ADM_P0_CFG,
+	[1] = ADM_P1_CFG,
+	[2] = ADM_P2_CFG,
+	[3] = ADM_P3_CFG,
+	[4] = ADM_P4_CFG,
+	[5] = ADM_P5_CFG,
+};
+
+/*
+ * Split the register address in phy id and register
+ * it will get combined again by the mdio bus op
+ */
+#define PHYADDR(_reg)	((_reg >> 5) & 0xff), (_reg & 0x1f)
+
+#endif
diff --git a/target/linux/generic/files/drivers/net/phy/ar8216.c b/target/linux/generic/files/drivers/net/phy/ar8216.c
new file mode 100644
index 0000000000..4ae61da233
--- /dev/null
+++ b/target/linux/generic/files/drivers/net/phy/ar8216.c
@@ -0,0 +1,839 @@
+/*
+ * ar8216.c: AR8216 switch driver
+ *
+ * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/if.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/if_ether.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/netlink.h>
+#include <linux/bitops.h>
+#include <net/genetlink.h>
+#include <linux/switch.h>
+#include <linux/delay.h>
+#include <linux/phy.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include "ar8216.h"
+
+/* size of the vlan table */
+#define AR8X16_MAX_VLANS	128
+#define AR8X16_PROBE_RETRIES	10
+
+struct ar8216_priv {
+	struct switch_dev dev;
+	struct phy_device *phy;
+	u32 (*read)(struct ar8216_priv *priv, int reg);
+	void (*write)(struct ar8216_priv *priv, int reg, u32 val);
+	const struct net_device_ops *ndo_old;
+	struct net_device_ops ndo;
+	struct mutex reg_mutex;
+	int chip;
+
+	/* all fields below are cleared on reset */
+	bool vlan;
+	u16 vlan_id[AR8X16_MAX_VLANS];
+	u8 vlan_table[AR8X16_MAX_VLANS];
+	u8 vlan_tagged;
+	u16 pvid[AR8216_NUM_PORTS];
+};
+static struct switch_dev athdev;
+
+#define to_ar8216(_dev) container_of(_dev, struct ar8216_priv, dev)
+
+static inline void
+split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page)
+{
+	regaddr >>= 1;
+	*r1 = regaddr & 0x1e;
+
+	regaddr >>= 5;
+	*r2 = regaddr & 0x7;
+
+	regaddr >>= 3;
+	*page = regaddr & 0x1ff;
+}
+
+static u32
+ar8216_mii_read(struct ar8216_priv *priv, int reg)
+{
+	struct phy_device *phy = priv->phy;
+	u16 r1, r2, page;
+	u16 lo, hi;
+
+	split_addr((u32) reg, &r1, &r2, &page);
+	phy->bus->write(phy->bus, 0x18, 0, page);
+	msleep(1); /* wait for the page switch to propagate */
+	lo = phy->bus->read(phy->bus, 0x10 | r2, r1);
+	hi = phy->bus->read(phy->bus, 0x10 | r2, r1 + 1);
+
+	return (hi << 16) | lo;
+}
+
+static void
+ar8216_mii_write(struct ar8216_priv *priv, int reg, u32 val)
+{
+	struct phy_device *phy = priv->phy;
+	u16 r1, r2, r3;
+	u16 lo, hi;
+
+	split_addr((u32) reg, &r1, &r2, &r3);
+	phy->bus->write(phy->bus, 0x18, 0, r3);
+	msleep(1); /* wait for the page switch to propagate */
+
+	lo = val & 0xffff;
+	hi = (u16) (val >> 16);
+	phy->bus->write(phy->bus, 0x10 | r2, r1 + 1, hi);
+	phy->bus->write(phy->bus, 0x10 | r2, r1, lo);
+}
+
+static u32
+ar8216_rmw(struct ar8216_priv *priv, int reg, u32 mask, u32 val)
+{
+	u32 v;
+
+	v = priv->read(priv, reg);
+	v &= ~mask;
+	v |= val;
+	priv->write(priv, reg, v);
+
+	return v;
+}
+
+static inline int
+ar8216_id_chip(struct ar8216_priv *priv)
+{
+	u32 val;
+	u16 id;
+	int i;
+
+	val = ar8216_mii_read(priv, AR8216_REG_CTRL);
+	if (val == ~0)
+		return UNKNOWN;
+
+	id = val & (AR8216_CTRL_REVISION | AR8216_CTRL_VERSION);
+	for (i = 0; i < AR8X16_PROBE_RETRIES; i++) {
+		u16 t;
+
+		val = ar8216_mii_read(priv, AR8216_REG_CTRL);
+		if (val == ~0)
+			return UNKNOWN;
+
+		t = val & (AR8216_CTRL_REVISION | AR8216_CTRL_VERSION);
+		if (t != id)
+			return UNKNOWN;
+	}
+
+	switch (id) {
+	case 0x0101:
+		return AR8216;
+	case 0x1001:
+		return AR8316;
+	default:
+		printk(KERN_DEBUG
+			"ar8216: Unknown Atheros device [ver=%d, rev=%d, phy_id=%04x%04x]\n",
+			(int)(id >> AR8216_CTRL_VERSION_S),
+			(int)(id & AR8216_CTRL_REVISION),
+			priv->phy->bus->read(priv->phy->bus, priv->phy->addr, 2),
+			priv->phy->bus->read(priv->phy->bus, priv->phy->addr, 3));
+
+		return UNKNOWN;
+	}
+}
+
+static int
+ar8216_set_vlan(struct switch_dev *dev, const struct switch_attr *attr,
+                struct switch_val *val)
+{
+	struct ar8216_priv *priv = to_ar8216(dev);
+	priv->vlan = !!val->value.i;
+	return 0;
+}
+
+static int
+ar8216_get_vlan(struct switch_dev *dev, const struct switch_attr *attr,
+                struct switch_val *val)
+{
+	struct ar8216_priv *priv = to_ar8216(dev);
+	val->value.i = priv->vlan;
+	return 0;
+}
+
+
+static int
+ar8216_set_pvid(struct switch_dev *dev, int port, int vlan)
+{
+	struct ar8216_priv *priv = to_ar8216(dev);
+
+	/* make sure no invalid PVIDs get set */
+
+	if (vlan >= dev->vlans)
+		return -EINVAL;
+
+	priv->pvid[port] = vlan;
+	return 0;
+}
+
+static int
+ar8216_get_pvid(struct switch_dev *dev, int port, int *vlan)
+{
+	struct ar8216_priv *priv = to_ar8216(dev);
+	*vlan = priv->pvid[port];
+	return 0;
+}
+
+static int
+ar8216_set_vid(struct switch_dev *dev, const struct switch_attr *attr,
+                struct switch_val *val)
+{
+	struct ar8216_priv *priv = to_ar8216(dev);
+	priv->vlan_id[val->port_vlan] = val->value.i;
+	return 0;
+}
+
+static int
+ar8216_get_vid(struct switch_dev *dev, const struct switch_attr *attr,
+                struct switch_val *val)
+{
+	struct ar8216_priv *priv = to_ar8216(dev);
+	val->value.i = priv->vlan_id[val->port_vlan];
+	return 0;
+}
+
+
+static int
+ar8216_mangle_tx(struct sk_buff *skb, struct net_device *dev)
+{
+	struct ar8216_priv *priv = dev->phy_ptr;
+	unsigned char *buf;
+
+    if (unlikely(!priv))
+        goto error;
+
+	if (!priv->vlan)
+		goto send;
+
+	if (unlikely(skb_headroom(skb) < 2)) {
+		if (pskb_expand_head(skb, 2, 0, GFP_ATOMIC) < 0)
+			goto error;
+	}
+
+	buf = skb_push(skb, 2);
+	buf[0] = 0x10;
+	buf[1] = 0x80;
+
+send:
+	return priv->ndo_old->ndo_start_xmit(skb, dev);
+
+error:
+	dev_kfree_skb_any(skb);
+	return 0;
+}
+
+static int
+ar8216_mangle_rx(struct sk_buff *skb, int napi)
+{
+	struct ar8216_priv *priv;
+	struct net_device *dev;
+	unsigned char *buf;
+	int port, vlan;
+
+	dev = skb->dev;
+	if (!dev)
+		goto error;
+
+	priv = dev->phy_ptr;
+	if (!priv)
+		goto error;
+
+	/* don't strip the header if vlan mode is disabled */
+	if (!priv->vlan)
+		goto recv;
+
+	/* strip header, get vlan id */
+	buf = skb->data;
+	skb_pull(skb, 2);
+
+	/* check for vlan header presence */
+	if ((buf[12 + 2] != 0x81) || (buf[13 + 2] != 0x00))
+		goto recv;
+
+	port = buf[0] & 0xf;
+
+	/* no need to fix up packets coming from a tagged source */
+	if (priv->vlan_tagged & (1 << port))
+		goto recv;
+
+	/* lookup port vid from local table, the switch passes an invalid vlan id */
+	vlan = priv->vlan_id[priv->pvid[port]];
+
+	buf[14 + 2] &= 0xf0;
+	buf[14 + 2] |= vlan >> 8;
+	buf[15 + 2] = vlan & 0xff;
+
+recv:
+	skb->protocol = eth_type_trans(skb, skb->dev);
+
+	if (napi)
+		return netif_receive_skb(skb);
+	else
+		return netif_rx(skb);
+
+error:
+	/* no vlan? eat the packet! */
+	dev_kfree_skb_any(skb);
+	return NET_RX_DROP;
+}
+
+static int
+ar8216_netif_rx(struct sk_buff *skb)
+{
+	return ar8216_mangle_rx(skb, 0);
+}
+
+static int
+ar8216_netif_receive_skb(struct sk_buff *skb)
+{
+	return ar8216_mangle_rx(skb, 1);
+}
+
+
+static struct switch_attr ar8216_globals[] = {
+	{
+		.type = SWITCH_TYPE_INT,
+		.name = "enable_vlan",
+		.description = "Enable VLAN mode",
+		.set = ar8216_set_vlan,
+		.get = ar8216_get_vlan,
+		.max = 1
+	},
+};
+
+static struct switch_attr ar8216_port[] = {
+};
+
+static struct switch_attr ar8216_vlan[] = {
+	{
+		.type = SWITCH_TYPE_INT,
+		.name = "pvid",
+		.description = "VLAN ID",
+		.set = ar8216_set_vid,
+		.get = ar8216_get_vid,
+		.max = 4094,
+	},
+};
+
+
+static int
+ar8216_get_ports(struct switch_dev *dev, struct switch_val *val)
+{
+	struct ar8216_priv *priv = to_ar8216(dev);
+	u8 ports = priv->vlan_table[val->port_vlan];
+	int i;
+
+	val->len = 0;
+	for (i = 0; i < AR8216_NUM_PORTS; i++) {
+		struct switch_port *p;
+
+		if (!(ports & (1 << i)))
+			continue;
+
+		p = &val->value.ports[val->len++];
+		p->id = i;
+		if (priv->vlan_tagged & (1 << i))
+			p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
+		else
+			p->flags = 0;
+	}
+	return 0;
+}
+
+static int
+ar8216_set_ports(struct switch_dev *dev, struct switch_val *val)
+{
+	struct ar8216_priv *priv = to_ar8216(dev);
+	u8 *vt = &priv->vlan_table[val->port_vlan];
+	int i, j;
+
+	*vt = 0;
+	for (i = 0; i < val->len; i++) {
+		struct switch_port *p = &val->value.ports[i];
+
+		if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED))
+			priv->vlan_tagged |= (1 << p->id);
+		else {
+			priv->vlan_tagged &= ~(1 << p->id);
+			priv->pvid[p->id] = val->port_vlan;
+
+			/* make sure that an untagged port does not
+			 * appear in other vlans */
+			for (j = 0; j < AR8X16_MAX_VLANS; j++) {
+				if (j == val->port_vlan)
+					continue;
+				priv->vlan_table[j] &= ~(1 << p->id);
+			}
+		}
+
+		*vt |= 1 << p->id;
+	}
+	return 0;
+}
+
+static int
+ar8216_wait_bit(struct ar8216_priv *priv, int reg, u32 mask, u32 val)
+{
+	int timeout = 20;
+
+	while ((priv->read(priv, reg) & mask) != val) {
+		if (timeout-- <= 0) {
+			printk(KERN_ERR "ar8216: timeout waiting for operation to complete\n");
+			return 1;
+		}
+	}
+	return 0;
+}
+
+static void
+ar8216_vtu_op(struct ar8216_priv *priv, u32 op, u32 val)
+{
+	if (ar8216_wait_bit(priv, AR8216_REG_VTU, AR8216_VTU_ACTIVE, 0))
+		return;
+	if ((op & AR8216_VTU_OP) == AR8216_VTU_OP_LOAD) {
+		val &= AR8216_VTUDATA_MEMBER;
+		val |= AR8216_VTUDATA_VALID;
+		priv->write(priv, AR8216_REG_VTU_DATA, val);
+	}
+	op |= AR8216_VTU_ACTIVE;
+	priv->write(priv, AR8216_REG_VTU, op);
+}
+
+static int
+ar8216_hw_apply(struct switch_dev *dev)
+{
+	struct ar8216_priv *priv = to_ar8216(dev);
+	u8 portmask[AR8216_NUM_PORTS];
+	int i, j;
+
+	mutex_lock(&priv->reg_mutex);
+	/* flush all vlan translation unit entries */
+	ar8216_vtu_op(priv, AR8216_VTU_OP_FLUSH, 0);
+
+	memset(portmask, 0, sizeof(portmask));
+	if (priv->vlan) {
+		/* calculate the port destination masks and load vlans
+		 * into the vlan translation unit */
+		for (j = 0; j < AR8X16_MAX_VLANS; j++) {
+			u8 vp = priv->vlan_table[j];
+
+			if (!vp)
+				continue;
+
+			for (i = 0; i < AR8216_NUM_PORTS; i++) {
+				u8 mask = (1 << i);
+				if (vp & mask)
+					portmask[i] |= vp & ~mask;
+			}
+
+			ar8216_vtu_op(priv,
+				AR8216_VTU_OP_LOAD |
+				(priv->vlan_id[j] << AR8216_VTU_VID_S),
+				priv->vlan_table[j]);
+		}
+	} else {
+		/* vlan disabled:
+		 * isolate all ports, but connect them to the cpu port */
+		for (i = 0; i < AR8216_NUM_PORTS; i++) {
+			if (i == AR8216_PORT_CPU)
+				continue;
+
+			portmask[i] = 1 << AR8216_PORT_CPU;
+			portmask[AR8216_PORT_CPU] |= (1 << i);
+		}
+	}
+
+	/* update the port destination mask registers and tag settings */
+	for (i = 0; i < AR8216_NUM_PORTS; i++) {
+		int egress, ingress;
+		int pvid;
+
+		if (priv->vlan) {
+			pvid = priv->vlan_id[priv->pvid[i]];
+		} else {
+			pvid = i;
+		}
+
+		if (priv->vlan && (priv->vlan_tagged & (1 << i))) {
+			egress = AR8216_OUT_ADD_VLAN;
+		} else {
+			egress = AR8216_OUT_STRIP_VLAN;
+		}
+		if (priv->vlan) {
+			ingress = AR8216_IN_SECURE;
+		} else {
+			ingress = AR8216_IN_PORT_ONLY;
+		}
+
+		ar8216_rmw(priv, AR8216_REG_PORT_CTRL(i),
+			AR8216_PORT_CTRL_LEARN | AR8216_PORT_CTRL_VLAN_MODE |
+			AR8216_PORT_CTRL_SINGLE_VLAN | AR8216_PORT_CTRL_STATE |
+			AR8216_PORT_CTRL_HEADER | AR8216_PORT_CTRL_LEARN_LOCK,
+			AR8216_PORT_CTRL_LEARN |
+			  (priv->vlan && i == AR8216_PORT_CPU && (priv->chip == AR8216) ?
+			   AR8216_PORT_CTRL_HEADER : 0) |
+			  (egress << AR8216_PORT_CTRL_VLAN_MODE_S) |
+			  (AR8216_PORT_STATE_FORWARD << AR8216_PORT_CTRL_STATE_S));
+
+		ar8216_rmw(priv, AR8216_REG_PORT_VLAN(i),
+			AR8216_PORT_VLAN_DEST_PORTS | AR8216_PORT_VLAN_MODE |
+			  AR8216_PORT_VLAN_DEFAULT_ID,
+			(portmask[i] << AR8216_PORT_VLAN_DEST_PORTS_S) |
+			  (ingress << AR8216_PORT_VLAN_MODE_S) |
+			  (pvid << AR8216_PORT_VLAN_DEFAULT_ID_S));
+	}
+	mutex_unlock(&priv->reg_mutex);
+	return 0;
+}
+
+static int
+ar8316_hw_init(struct ar8216_priv *priv) {
+	static int initialized;
+	int i;
+	u32 val;
+	struct mii_bus *bus;
+
+	if (initialized)
+		return 0;
+
+	val = priv->read(priv, 0x8);
+
+	if (priv->phy->interface == PHY_INTERFACE_MODE_RGMII) {
+		/* value taken from Ubiquiti RouterStation Pro */
+		if (val == 0x81461bea) {
+			/* switch already intialized by bootloader */
+			initialized = true;
+			return 0;
+		}
+		priv->write(priv, 0x8, 0x81461bea);
+	} else if (priv->phy->interface == PHY_INTERFACE_MODE_GMII) {
+		/* value taken from AVM Fritz!Box 7390 sources */
+		if (val == 0x010e5b71) {
+			/* switch already initialized by bootloader */
+			initialized = true;
+			return 0;
+		}
+		priv->write(priv, 0x8, 0x010e5b71);
+	} else {
+		/* no known value for phy interface */
+		printk(KERN_ERR "ar8316: unsupported mii mode: %d.\n",
+			priv->phy->interface);
+		return -EINVAL;
+	}
+
+	/* standard atheros magic */
+	priv->write(priv, 0x38, 0xc000050e);
+
+	/* Initialize the ports */
+	bus = priv->phy->bus;
+	for (i = 0; i < 5; i++) {
+		if ((i == 4) &&
+			priv->phy->interface == PHY_INTERFACE_MODE_RGMII) {
+			/* work around for phy4 rgmii mode */
+			bus->write(bus, i, MII_ATH_DBG_ADDR, 0x12);
+			bus->write(bus, i, MII_ATH_DBG_DATA, 0x480c);
+			/* rx delay */
+			bus->write(bus, i, MII_ATH_DBG_ADDR, 0x0);
+			bus->write(bus, i, MII_ATH_DBG_DATA, 0x824e);
+			/* tx delay */
+			bus->write(bus, i, MII_ATH_DBG_ADDR, 0x5);
+			bus->write(bus, i, MII_ATH_DBG_DATA, 0x3d47);
+			msleep(1000);
+		}
+
+		/* initialize the port itself */
+		bus->write(bus, i, MII_ADVERTISE,
+			ADVERTISE_ALL | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM);
+		bus->write(bus, i, MII_CTRL1000, ADVERTISE_1000FULL);
+		bus->write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
+		msleep(1000);
+	}
+	initialized = true;
+	return 0;
+}
+
+static int
+ar8216_reset_switch(struct switch_dev *dev)
+{
+	struct ar8216_priv *priv = to_ar8216(dev);
+	int i;
+
+	mutex_lock(&priv->reg_mutex);
+	memset(&priv->vlan, 0, sizeof(struct ar8216_priv) -
+		offsetof(struct ar8216_priv, vlan));
+	for (i = 0; i < AR8X16_MAX_VLANS; i++) {
+		priv->vlan_id[i] = i;
+	}
+	for (i = 0; i < AR8216_NUM_PORTS; i++) {
+		/* Enable port learning and tx */
+		priv->write(priv, AR8216_REG_PORT_CTRL(i),
+			AR8216_PORT_CTRL_LEARN |
+			(4 << AR8216_PORT_CTRL_STATE_S));
+
+		priv->write(priv, AR8216_REG_PORT_VLAN(i), 0);
+
+		/* Configure all PHYs */
+		if (i == AR8216_PORT_CPU) {
+			priv->write(priv, AR8216_REG_PORT_STATUS(i),
+				AR8216_PORT_STATUS_LINK_UP |
+				((priv->chip == AR8316) ?
+					AR8216_PORT_SPEED_1000M : AR8216_PORT_SPEED_100M) |
+				AR8216_PORT_STATUS_TXMAC |
+				AR8216_PORT_STATUS_RXMAC |
+				((priv->chip == AR8316) ? AR8216_PORT_STATUS_RXFLOW : 0) |
+				((priv->chip == AR8316) ? AR8216_PORT_STATUS_TXFLOW : 0) |
+				AR8216_PORT_STATUS_DUPLEX);
+		} else {
+			priv->write(priv, AR8216_REG_PORT_STATUS(i),
+				AR8216_PORT_STATUS_LINK_AUTO);
+		}
+	}
+	/* XXX: undocumented magic from atheros, required! */
+	priv->write(priv, 0x38, 0xc000050e);
+
+	if (priv->chip == AR8216) {
+		ar8216_rmw(priv, AR8216_REG_GLOBAL_CTRL,
+			AR8216_GCTRL_MTU, 1518 + 8 + 2);
+	} else if (priv->chip == AR8316) {
+		/* enable jumbo frames */
+		ar8216_rmw(priv, AR8216_REG_GLOBAL_CTRL,
+			AR8316_GCTRL_MTU, 9018 + 8 + 2);
+	}
+
+	if (priv->chip == AR8316) {
+		/* enable cpu port to receive multicast and broadcast frames */
+		priv->write(priv, AR8216_REG_FLOOD_MASK, 0x003f003f);
+	}
+	mutex_unlock(&priv->reg_mutex);
+	return ar8216_hw_apply(dev);
+}
+
+static int
+ar8216_config_init(struct phy_device *pdev)
+{
+	struct ar8216_priv *priv;
+	struct net_device *dev = pdev->attached_dev;
+	int ret;
+
+	priv = kzalloc(sizeof(struct ar8216_priv), GFP_KERNEL);
+	if (priv == NULL)
+		return -ENOMEM;
+
+	priv->phy = pdev;
+
+	priv->chip = ar8216_id_chip(priv);
+
+	if (pdev->addr == 0)
+		printk(KERN_INFO "%s: AR%d switch driver attached.\n",
+			pdev->attached_dev->name, priv->chip);
+
+
+	if (pdev->addr != 0) {
+		if (priv->chip == AR8316) {
+			pdev->supported |= SUPPORTED_1000baseT_Full;
+			pdev->advertising |= ADVERTISED_1000baseT_Full;
+		}
+		kfree(priv);
+		return 0;
+	}
+
+	pdev->supported = priv->chip == AR8316 ?
+		SUPPORTED_1000baseT_Full : SUPPORTED_100baseT_Full;
+	pdev->advertising = pdev->supported;
+
+	mutex_init(&priv->reg_mutex);
+	priv->read = ar8216_mii_read;
+	priv->write = ar8216_mii_write;
+	memcpy(&priv->dev, &athdev, sizeof(struct switch_dev));
+	pdev->priv = priv;
+
+	if (priv->chip == AR8316) {
+		priv->dev.name = "Atheros AR8316";
+		priv->dev.vlans = AR8X16_MAX_VLANS;
+		/* port 5 connected to the other mac, therefore unusable */
+		priv->dev.ports = (AR8216_NUM_PORTS - 1);
+	}
+
+	if ((ret = register_switch(&priv->dev, pdev->attached_dev)) < 0) {
+		kfree(priv);
+		goto done;
+	}
+
+	if (priv->chip == AR8316) {
+		ret = ar8316_hw_init(priv);
+		if (ret) {
+			kfree(priv);
+			goto done;
+		}
+	}
+
+	ret = ar8216_reset_switch(&priv->dev);
+	if (ret) {
+		kfree(priv);
+		goto done;
+	}
+
+	dev->phy_ptr = priv;
+
+	/* VID fixup only needed on ar8216 */
+	if (pdev->addr == 0 && priv->chip == AR8216) {
+		pdev->pkt_align = 2;
+		pdev->netif_receive_skb = ar8216_netif_receive_skb;
+		pdev->netif_rx = ar8216_netif_rx;
+		priv->ndo_old = dev->netdev_ops;
+		memcpy(&priv->ndo, priv->ndo_old, sizeof(struct net_device_ops));
+		priv->ndo.ndo_start_xmit = ar8216_mangle_tx;
+		dev->netdev_ops = &priv->ndo;
+	}
+
+done:
+	return ret;
+}
+
+static int
+ar8216_read_status(struct phy_device *phydev)
+{
+	struct ar8216_priv *priv = phydev->priv;
+	int ret;
+	if (phydev->addr != 0) {
+		return genphy_read_status(phydev);
+	}
+
+	phydev->speed = priv->chip == AR8316 ? SPEED_1000 : SPEED_100;
+	phydev->duplex = DUPLEX_FULL;
+	phydev->link = 1;
+
+	/* flush the address translation unit */
+	mutex_lock(&priv->reg_mutex);
+	ret = ar8216_wait_bit(priv, AR8216_REG_ATU, AR8216_ATU_ACTIVE, 0);
+
+	if (!ret)
+		priv->write(priv, AR8216_REG_ATU, AR8216_ATU_OP_FLUSH);
+	else
+		ret = -ETIMEDOUT;
+	mutex_unlock(&priv->reg_mutex);
+
+	phydev->state = PHY_RUNNING;
+	netif_carrier_on(phydev->attached_dev);
+	phydev->adjust_link(phydev->attached_dev);
+
+	return ret;
+}
+
+static int
+ar8216_config_aneg(struct phy_device *phydev)
+{
+	if (phydev->addr == 0)
+		return 0;
+
+	return genphy_config_aneg(phydev);
+}
+
+static int
+ar8216_probe(struct phy_device *pdev)
+{
+	struct ar8216_priv priv;
+	u16 chip;
+
+	priv.phy = pdev;
+	chip = ar8216_id_chip(&priv);
+	if (chip == UNKNOWN)
+		return -ENODEV;
+
+	return 0;
+}
+
+static void
+ar8216_remove(struct phy_device *pdev)
+{
+	struct ar8216_priv *priv = pdev->priv;
+	struct net_device *dev = pdev->attached_dev;
+
+	if (!priv)
+		return;
+
+	if (priv->ndo_old && dev)
+		dev->netdev_ops = priv->ndo_old;
+	if (pdev->addr == 0)
+		unregister_switch(&priv->dev);
+	kfree(priv);
+}
+
+/* template */
+static struct switch_dev athdev = {
+	.name = "Atheros AR8216",
+	.cpu_port = AR8216_PORT_CPU,
+	.ports = AR8216_NUM_PORTS,
+	.vlans = AR8216_NUM_VLANS,
+	.attr_global = {
+		.attr = ar8216_globals,
+		.n_attr = ARRAY_SIZE(ar8216_globals),
+	},
+	.attr_port = {
+		.attr = ar8216_port,
+		.n_attr = ARRAY_SIZE(ar8216_port),
+	},
+	.attr_vlan = {
+		.attr = ar8216_vlan,
+		.n_attr = ARRAY_SIZE(ar8216_vlan),
+	},
+	.get_port_pvid = ar8216_get_pvid,
+	.set_port_pvid = ar8216_set_pvid,
+	.get_vlan_ports = ar8216_get_ports,
+	.set_vlan_ports = ar8216_set_ports,
+	.apply_config = ar8216_hw_apply,
+	.reset_switch = ar8216_reset_switch,
+};
+
+static struct phy_driver ar8216_driver = {
+	.phy_id		= 0x004d0000,
+	.name		= "Atheros AR8216/AR8316",
+	.phy_id_mask	= 0xffff0000,
+	.features	= PHY_BASIC_FEATURES,
+	.probe		= ar8216_probe,
+	.remove		= ar8216_remove,
+	.config_init	= &ar8216_config_init,
+	.config_aneg	= &ar8216_config_aneg,
+	.read_status	= &ar8216_read_status,
+	.driver		= { .owner = THIS_MODULE },
+};
+
+int __init
+ar8216_init(void)
+{
+	return phy_driver_register(&ar8216_driver);
+}
+
+void __exit
+ar8216_exit(void)
+{
+	phy_driver_unregister(&ar8216_driver);
+}
+
+module_init(ar8216_init);
+module_exit(ar8216_exit);
+MODULE_LICENSE("GPL");
+
diff --git a/target/linux/generic/files/drivers/net/phy/ar8216.h b/target/linux/generic/files/drivers/net/phy/ar8216.h
new file mode 100644
index 0000000000..5a8fa3c003
--- /dev/null
+++ b/target/linux/generic/files/drivers/net/phy/ar8216.h
@@ -0,0 +1,187 @@
+/*
+ * ar8216.h: AR8216 switch driver
+ *
+ * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __AR8216_H
+#define __AR8216_H
+
+#define BITS(_s, _n)	(((1UL << (_n)) - 1) << _s)
+
+#define AR8216_PORT_CPU	0
+#define AR8216_NUM_PORTS	6
+#define AR8216_NUM_VLANS	16
+#define AR8316_NUM_VLANS	4096
+
+/* Atheros specific MII registers */
+#define MII_ATH_DBG_ADDR		0x1d
+#define MII_ATH_DBG_DATA		0x1e
+
+#define AR8216_REG_CTRL			0x0000
+#define   AR8216_CTRL_REVISION		BITS(0, 8)
+#define   AR8216_CTRL_REVISION_S	0
+#define   AR8216_CTRL_VERSION		BITS(8, 8)
+#define   AR8216_CTRL_VERSION_S		8
+#define   AR8216_CTRL_RESET		BIT(31)
+
+#define AR8216_REG_FLOOD_MASK		0x002C
+#define   AR8216_FM_UNI_DEST_PORTS	BITS(0, 6)
+#define   AR8216_FM_MULTI_DEST_PORTS	BITS(16, 6)
+
+#define AR8216_REG_GLOBAL_CTRL		0x0030
+#define   AR8216_GCTRL_MTU		BITS(0, 11)
+#define   AR8316_GCTRL_MTU		BITS(0, 14)
+
+#define AR8216_REG_VTU			0x0040
+#define   AR8216_VTU_OP			BITS(0, 3)
+#define   AR8216_VTU_OP_NOOP		0x0
+#define   AR8216_VTU_OP_FLUSH		0x1
+#define   AR8216_VTU_OP_LOAD		0x2
+#define   AR8216_VTU_OP_PURGE		0x3
+#define   AR8216_VTU_OP_REMOVE_PORT	0x4
+#define   AR8216_VTU_ACTIVE		BIT(3)
+#define   AR8216_VTU_FULL		BIT(4)
+#define   AR8216_VTU_PORT		BITS(8, 4)
+#define   AR8216_VTU_PORT_S		8
+#define   AR8216_VTU_VID		BITS(16, 12)
+#define   AR8216_VTU_VID_S		16
+#define   AR8216_VTU_PRIO		BITS(28, 3)
+#define   AR8216_VTU_PRIO_S		28
+#define   AR8216_VTU_PRIO_EN		BIT(31)
+
+#define AR8216_REG_VTU_DATA		0x0044
+#define   AR8216_VTUDATA_MEMBER		BITS(0, 10)
+#define   AR8216_VTUDATA_VALID		BIT(11)
+
+#define AR8216_REG_ATU			0x0050
+#define   AR8216_ATU_OP			BITS(0, 3)
+#define   AR8216_ATU_OP_NOOP		0x0
+#define   AR8216_ATU_OP_FLUSH		0x1
+#define   AR8216_ATU_OP_LOAD		0x2
+#define   AR8216_ATU_OP_PURGE		0x3
+#define   AR8216_ATU_OP_FLUSH_LOCKED	0x4
+#define   AR8216_ATU_OP_FLUSH_UNICAST	0x5
+#define   AR8216_ATU_OP_GET_NEXT	0x6
+#define   AR8216_ATU_ACTIVE		BIT(3)
+#define   AR8216_ATU_PORT_NUM		BITS(8, 4)
+#define   AR8216_ATU_FULL_VIO		BIT(12)
+#define   AR8216_ATU_ADDR4		BITS(16, 8)
+#define   AR8216_ATU_ADDR5		BITS(24, 8)
+
+#define AR8216_REG_ATU_DATA		0x0054
+#define   AR8216_ATU_ADDR3		BITS(0, 8)
+#define   AR8216_ATU_ADDR2		BITS(8, 8)
+#define   AR8216_ATU_ADDR1		BITS(16, 8)
+#define   AR8216_ATU_ADDR0		BITS(24, 8)
+
+#define AR8216_REG_ATU_CTRL		0x005C
+#define   AR8216_ATU_CTRL_AGE_EN	BIT(17)
+#define   AR8216_ATU_CTRL_AGE_TIME	BITS(0, 16)
+#define   AR8216_ATU_CTRL_AGE_TIME_S	0
+
+#define AR8216_PORT_OFFSET(_i)		(0x0100 * (_i + 1))
+#define AR8216_REG_PORT_STATUS(_i)	(AR8216_PORT_OFFSET(_i) + 0x0000)
+#define   AR8216_PORT_STATUS_SPEED	BITS(0,2)
+#define   AR8216_PORT_STATUS_SPEED_S	0
+#define   AR8216_PORT_STATUS_TXMAC	BIT(2)
+#define   AR8216_PORT_STATUS_RXMAC	BIT(3)
+#define   AR8216_PORT_STATUS_TXFLOW	BIT(4)
+#define   AR8216_PORT_STATUS_RXFLOW	BIT(5)
+#define   AR8216_PORT_STATUS_DUPLEX	BIT(6)
+#define   AR8216_PORT_STATUS_LINK_UP	BIT(8)
+#define   AR8216_PORT_STATUS_LINK_AUTO	BIT(9)
+#define   AR8216_PORT_STATUS_LINK_PAUSE	BIT(10)
+
+#define AR8216_REG_PORT_CTRL(_i)	(AR8216_PORT_OFFSET(_i) + 0x0004)
+
+/* port forwarding state */
+#define   AR8216_PORT_CTRL_STATE	BITS(0, 3)
+#define   AR8216_PORT_CTRL_STATE_S	0
+
+#define   AR8216_PORT_CTRL_LEARN_LOCK	BIT(7)
+
+/* egress 802.1q mode */
+#define   AR8216_PORT_CTRL_VLAN_MODE	BITS(8, 2)
+#define   AR8216_PORT_CTRL_VLAN_MODE_S	8
+
+#define   AR8216_PORT_CTRL_IGMP_SNOOP	BIT(10)
+#define   AR8216_PORT_CTRL_HEADER	BIT(11)
+#define   AR8216_PORT_CTRL_MAC_LOOP	BIT(12)
+#define   AR8216_PORT_CTRL_SINGLE_VLAN	BIT(13)
+#define   AR8216_PORT_CTRL_LEARN	BIT(14)
+#define   AR8216_PORT_CTRL_MIRROR_TX	BIT(16)
+#define   AR8216_PORT_CTRL_MIRROR_RX	BIT(17)
+
+#define AR8216_REG_PORT_VLAN(_i)	(AR8216_PORT_OFFSET(_i) + 0x0008)
+
+#define   AR8216_PORT_VLAN_DEFAULT_ID	BITS(0, 12)
+#define   AR8216_PORT_VLAN_DEFAULT_ID_S	0
+
+#define   AR8216_PORT_VLAN_DEST_PORTS	BITS(16, 9)
+#define   AR8216_PORT_VLAN_DEST_PORTS_S	16
+
+/* bit0 added to the priority field of egress frames */
+#define   AR8216_PORT_VLAN_TX_PRIO	BIT(27)
+
+/* port default priority */
+#define   AR8216_PORT_VLAN_PRIORITY	BITS(28, 2)
+#define   AR8216_PORT_VLAN_PRIORITY_S	28
+
+/* ingress 802.1q mode */
+#define   AR8216_PORT_VLAN_MODE		BITS(30, 2)
+#define   AR8216_PORT_VLAN_MODE_S	30
+
+#define AR8216_REG_PORT_RATE(_i)	(AR8216_PORT_OFFSET(_i) + 0x000c)
+#define AR8216_REG_PORT_PRIO(_i)	(AR8216_PORT_OFFSET(_i) + 0x0010)
+
+/* port speed */
+enum {
+        AR8216_PORT_SPEED_10M = 0,
+        AR8216_PORT_SPEED_100M = 1,
+        AR8216_PORT_SPEED_1000M = 2,
+        AR8216_PORT_SPEED_ERR = 3,
+};
+
+/* ingress 802.1q mode */
+enum {
+	AR8216_IN_PORT_ONLY = 0,
+	AR8216_IN_PORT_FALLBACK = 1,
+	AR8216_IN_VLAN_ONLY = 2,
+	AR8216_IN_SECURE = 3
+};
+
+/* egress 802.1q mode */
+enum {
+	AR8216_OUT_KEEP = 0,
+	AR8216_OUT_STRIP_VLAN = 1,
+	AR8216_OUT_ADD_VLAN = 2
+};
+
+/* port forwarding state */
+enum {
+	AR8216_PORT_STATE_DISABLED = 0,
+	AR8216_PORT_STATE_BLOCK = 1,
+	AR8216_PORT_STATE_LISTEN = 2,
+	AR8216_PORT_STATE_LEARN = 3,
+	AR8216_PORT_STATE_FORWARD = 4
+};
+
+/* device */
+enum {
+  UNKNOWN = 0,
+  AR8216 = 8216,
+  AR8316 = 8316
+};
+
+#endif
diff --git a/target/linux/generic/files/drivers/net/phy/ip17xx.c b/target/linux/generic/files/drivers/net/phy/ip17xx.c
new file mode 100644
index 0000000000..262123a57f
--- /dev/null
+++ b/target/linux/generic/files/drivers/net/phy/ip17xx.c
@@ -0,0 +1,1399 @@
+/*
+ * ip17xx.c: Swconfig configuration for IC+ IP17xx switch family
+ *
+ * Copyright (C) 2008 Patrick Horn <patrick.horn@gmail.com>
+ * Copyright (C) 2008, 2010 Martin Mares <mj@ucw.cz>
+ * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/skbuff.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+#include <linux/delay.h>
+#include <linux/switch.h>
+#include <linux/device.h>
+
+#define MAX_VLANS 16
+#define MAX_PORTS 9
+#undef DUMP_MII_IO
+
+typedef struct ip17xx_reg {
+	u16 p;			// phy
+	u16 m;			// mii
+} reg;
+typedef char bitnum;
+
+#define NOTSUPPORTED {-1,-1}
+
+#define REG_SUPP(x) (((x).m != ((u16)-1)) && ((x).p != (u16)-1))
+
+struct ip17xx_state;
+
+/*********** CONSTANTS ***********/
+struct register_mappings {
+	char *NAME;
+	u16 MODEL_NO;			// Compare to bits 4-9 of MII register 0,3.
+	bitnum NUM_PORTS;
+	bitnum CPU_PORT;
+
+/* The default VLAN for each port.
+	 Default: 0x0001 for Ports 0,1,2,3
+		  0x0002 for Ports 4,5 */
+	reg VLAN_DEFAULT_TAG_REG[MAX_PORTS];
+
+/* These ports are tagged.
+	 Default: 0x00 */
+	reg ADD_TAG_REG;
+	reg REMOVE_TAG_REG;
+	bitnum ADD_TAG_BIT[MAX_PORTS];
+/* These ports are untagged.
+	 Default: 0x00 (i.e. do not alter any VLAN tags...)
+	 Maybe set to 0 if user disables VLANs. */
+	bitnum REMOVE_TAG_BIT[MAX_PORTS];
+
+/* Port M and Port N are on the same VLAN.
+	 Default: All ports on all VLANs. */
+// Use register {29, 19+N/2}
+	reg VLAN_LOOKUP_REG;
+// Port 5 uses register {30, 18} but same as odd bits.
+	reg VLAN_LOOKUP_REG_5;		// in a different register on IP175C.
+	bitnum VLAN_LOOKUP_EVEN_BIT[MAX_PORTS];
+	bitnum VLAN_LOOKUP_ODD_BIT[MAX_PORTS];
+
+/* This VLAN corresponds to which ports.
+	 Default: 0x2f,0x30,0x3f,0x3f... */
+	reg TAG_VLAN_MASK_REG;
+	bitnum TAG_VLAN_MASK_EVEN_BIT[MAX_PORTS];
+	bitnum TAG_VLAN_MASK_ODD_BIT[MAX_PORTS];
+
+	int RESET_VAL;
+	reg RESET_REG;
+
+	reg MODE_REG;
+	int MODE_VAL;
+
+/* General flags */
+	reg ROUTER_CONTROL_REG;
+	reg VLAN_CONTROL_REG;
+	bitnum TAG_VLAN_BIT;
+	bitnum ROUTER_EN_BIT;
+	bitnum NUMLAN_GROUPS_MAX;
+	bitnum NUMLAN_GROUPS_BIT;
+
+	reg MII_REGISTER_EN;
+	bitnum MII_REGISTER_EN_BIT;
+
+	// set to 1 for 178C, 0 for 175C.
+	bitnum SIMPLE_VLAN_REGISTERS;	// 175C has two vlans per register but 178C has only one.
+
+	// Pointers to functions which manipulate hardware state
+	int (*update_state)(struct ip17xx_state *state);
+	int (*set_vlan_mode)(struct ip17xx_state *state);
+	int (*reset)(struct ip17xx_state *state);
+};
+
+static int ip175c_update_state(struct ip17xx_state *state);
+static int ip175c_set_vlan_mode(struct ip17xx_state *state);
+static int ip175c_reset(struct ip17xx_state *state);
+
+static const struct register_mappings IP178C = {
+	.NAME = "IP178C",
+	.MODEL_NO = 0x18,
+	.VLAN_DEFAULT_TAG_REG = {
+		{30,3},{30,4},{30,5},{30,6},{30,7},{30,8},
+		{30,9},{30,10},{30,11},
+	},
+
+	.ADD_TAG_REG = {30,12},
+	.ADD_TAG_BIT = {0,1,2,3,4,5,6,7,8},
+	.REMOVE_TAG_REG = {30,13},
+	.REMOVE_TAG_BIT = {4,5,6,7,8,9,10,11,12},
+
+	.SIMPLE_VLAN_REGISTERS = 1,
+
+	.VLAN_LOOKUP_REG = {31,0},// +N
+	.VLAN_LOOKUP_REG_5 = NOTSUPPORTED, // not used with SIMPLE_VLAN_REGISTERS
+	.VLAN_LOOKUP_EVEN_BIT = {0,1,2,3,4,5,6,7,8},
+	.VLAN_LOOKUP_ODD_BIT = {0,1,2,3,4,5,6,7,8},
+
+	.TAG_VLAN_MASK_REG = {30,14}, // +N
+	.TAG_VLAN_MASK_EVEN_BIT = {0,1,2,3,4,5,6,7,8},
+	.TAG_VLAN_MASK_ODD_BIT = {0,1,2,3,4,5,6,7,8},
+
+	.RESET_VAL = 0x55AA,
+	.RESET_REG = {30,0},
+	.MODE_VAL = 0,
+	.MODE_REG = NOTSUPPORTED,
+
+	.ROUTER_CONTROL_REG = {30,30},
+	.ROUTER_EN_BIT = 11,
+	.NUMLAN_GROUPS_MAX = 8,
+	.NUMLAN_GROUPS_BIT = 8, // {0-2}
+
+	.VLAN_CONTROL_REG = {30,13},
+	.TAG_VLAN_BIT = 3,
+
+	.CPU_PORT = 8,
+	.NUM_PORTS = 9,
+
+	.MII_REGISTER_EN = NOTSUPPORTED,
+
+	.update_state = ip175c_update_state,
+	.set_vlan_mode = ip175c_set_vlan_mode,
+	.reset = ip175c_reset,
+};
+
+static const struct register_mappings IP175C = {
+	.NAME = "IP175C",
+	.MODEL_NO = 0x18,
+	.VLAN_DEFAULT_TAG_REG = {
+		{29,24},{29,25},{29,26},{29,27},{29,28},{29,30},
+		NOTSUPPORTED,NOTSUPPORTED,NOTSUPPORTED
+	},
+
+	.ADD_TAG_REG = {29,23},
+	.REMOVE_TAG_REG = {29,23},
+	.ADD_TAG_BIT = {11,12,13,14,15,1,-1,-1,-1},
+	.REMOVE_TAG_BIT = {6,7,8,9,10,0,-1,-1,-1},
+
+	.SIMPLE_VLAN_REGISTERS = 0,
+
+	.VLAN_LOOKUP_REG = {29,19},// +N/2
+	.VLAN_LOOKUP_REG_5 = {30,18},
+	.VLAN_LOOKUP_EVEN_BIT = {8,9,10,11,12,15,-1,-1,-1},
+	.VLAN_LOOKUP_ODD_BIT = {0,1,2,3,4,7,-1,-1,-1},
+
+	.TAG_VLAN_MASK_REG = {30,1}, // +N/2
+	.TAG_VLAN_MASK_EVEN_BIT = {0,1,2,3,4,5,-1,-1,-1},
+	.TAG_VLAN_MASK_ODD_BIT = {8,9,10,11,12,13,-1,-1,-1},
+
+	.RESET_VAL = 0x175C,
+	.RESET_REG = {30,0},
+	.MODE_VAL = 0x175C,
+	.MODE_REG = {29,31},
+
+	.ROUTER_CONTROL_REG = {30,9},
+	.ROUTER_EN_BIT = 3,
+	.NUMLAN_GROUPS_MAX = 8,
+	.NUMLAN_GROUPS_BIT = 0, // {0-2}
+
+	.VLAN_CONTROL_REG = {30,9},
+	.TAG_VLAN_BIT = 7,
+
+	.NUM_PORTS = 6,
+	.CPU_PORT = 5,
+
+	.MII_REGISTER_EN = NOTSUPPORTED,
+
+	.update_state = ip175c_update_state,
+	.set_vlan_mode = ip175c_set_vlan_mode,
+	.reset = ip175c_reset,
+};
+
+static const struct register_mappings IP175A = {
+	.NAME = "IP175A",
+	.MODEL_NO = 0x05,
+	.VLAN_DEFAULT_TAG_REG = {
+		{0,24},{0,25},{0,26},{0,27},{0,28},NOTSUPPORTED,
+		NOTSUPPORTED,NOTSUPPORTED,NOTSUPPORTED
+	},
+
+	.ADD_TAG_REG = {0,23},
+	.REMOVE_TAG_REG = {0,23},
+	.ADD_TAG_BIT = {11,12,13,14,15,-1,-1,-1,-1},
+	.REMOVE_TAG_BIT = {6,7,8,9,10,-1,-1,-1,-1},
+
+	.SIMPLE_VLAN_REGISTERS = 0,
+
+	// Only programmable via EEPROM
+	.VLAN_LOOKUP_REG = NOTSUPPORTED,// +N/2
+	.VLAN_LOOKUP_REG_5 = NOTSUPPORTED,
+	.VLAN_LOOKUP_EVEN_BIT = {8,9,10,11,12,-1,-1,-1,-1},
+	.VLAN_LOOKUP_ODD_BIT = {0,1,2,3,4,-1,-1,-1,-1},
+
+	.TAG_VLAN_MASK_REG = NOTSUPPORTED, // +N/2,
+	.TAG_VLAN_MASK_EVEN_BIT = {-1,-1,-1,-1,-1,-1,-1,-1,-1},
+	.TAG_VLAN_MASK_ODD_BIT = {-1,-1,-1,-1,-1,-1,-1,-1,-1},
+
+	.RESET_VAL = -1,
+	.RESET_REG = NOTSUPPORTED,
+	.MODE_VAL = 0,
+	.MODE_REG = NOTSUPPORTED,
+
+	.ROUTER_CONTROL_REG = NOTSUPPORTED,
+	.VLAN_CONTROL_REG = NOTSUPPORTED,
+	.TAG_VLAN_BIT = -1,
+	.ROUTER_EN_BIT = -1,
+	.NUMLAN_GROUPS_MAX = -1,
+	.NUMLAN_GROUPS_BIT = -1, // {0-2}
+
+	.NUM_PORTS = 5,
+	.CPU_PORT = 4,
+
+	.MII_REGISTER_EN = {0, 18},
+	.MII_REGISTER_EN_BIT = 7,
+
+	.update_state = ip175c_update_state,
+	.set_vlan_mode = ip175c_set_vlan_mode,
+	.reset = ip175c_reset,
+};
+
+
+static int ip175d_update_state(struct ip17xx_state *state);
+static int ip175d_set_vlan_mode(struct ip17xx_state *state);
+static int ip175d_reset(struct ip17xx_state *state);
+
+static const struct register_mappings IP175D = {
+	.NAME = "IP175D",
+	.MODEL_NO = 0x18,
+
+	// The IP175D has a completely different interface, so we leave most
+	// of the registers undefined and switch to different code paths.
+
+	.VLAN_DEFAULT_TAG_REG = {
+		NOTSUPPORTED,NOTSUPPORTED,NOTSUPPORTED,NOTSUPPORTED,
+		NOTSUPPORTED,NOTSUPPORTED,NOTSUPPORTED,NOTSUPPORTED,
+	},
+
+	.ADD_TAG_REG = NOTSUPPORTED,
+	.REMOVE_TAG_REG = NOTSUPPORTED,
+
+	.SIMPLE_VLAN_REGISTERS = 0,
+
+	.VLAN_LOOKUP_REG = NOTSUPPORTED,
+	.VLAN_LOOKUP_REG_5 = NOTSUPPORTED,
+	.TAG_VLAN_MASK_REG = NOTSUPPORTED,
+
+	.RESET_VAL = 0x175D,
+	.RESET_REG = {20,2},
+	.MODE_REG = NOTSUPPORTED,
+
+	.ROUTER_CONTROL_REG = NOTSUPPORTED,
+	.ROUTER_EN_BIT = -1,
+	.NUMLAN_GROUPS_BIT = -1,
+
+	.VLAN_CONTROL_REG = NOTSUPPORTED,
+	.TAG_VLAN_BIT = -1,
+
+	.NUM_PORTS = 6,
+	.CPU_PORT = 5,
+
+	.MII_REGISTER_EN = NOTSUPPORTED,
+
+	.update_state = ip175d_update_state,
+	.set_vlan_mode = ip175d_set_vlan_mode,
+	.reset = ip175d_reset,
+};
+
+struct ip17xx_state {
+	struct switch_dev dev;
+	struct mii_bus *mii_bus;
+	bool registered;
+
+	int router_mode;		// ROUTER_EN
+	int vlan_enabled;		// TAG_VLAN_EN
+	struct port_state {
+		u16 pvid;
+		unsigned int shareports;
+	} ports[MAX_PORTS];
+	unsigned int add_tag;
+	unsigned int remove_tag;
+	int num_vlans;
+	struct vlan_state {
+		unsigned int ports;
+		unsigned int tag;	// VLAN tag (IP175D only)
+	} vlans[MAX_VLANS];
+	const struct register_mappings *regs;
+	reg proc_mii; 	// phy/reg for the low level register access via swconfig
+
+	char buf[80];
+};
+
+
+static int ip_phy_read(struct ip17xx_state *state, int port, int reg)
+{
+	int val = mdiobus_read(state->mii_bus, port, reg);
+	if (val < 0)
+		pr_warning("IP17xx: Unable to get MII register %d,%d: error %d\n", port, reg, -val);
+#ifdef DUMP_MII_IO
+	else
+		pr_debug("IP17xx: Read MII(%d,%d) -> %04x\n", port, reg, val);
+#endif
+	return val;
+}
+
+static int ip_phy_write(struct ip17xx_state *state, int port, int reg, u16 val)
+{
+	int err;
+
+#ifdef DUMP_MII_IO
+	pr_debug("IP17xx: Write MII(%d,%d) <- %04x\n", port, reg, val);
+#endif
+	err = mdiobus_write(state->mii_bus, port, reg, val);
+	if (err < 0)
+		pr_warning("IP17xx: Unable to write MII register %d,%d: error %d\n", port, reg, -err);
+	return err;
+}
+
+static int ip_phy_write_masked(struct ip17xx_state *state, int port, int reg, unsigned int mask, unsigned int data)
+{
+	int val = ip_phy_read(state, port, reg);
+	if (val < 0)
+		return 0;
+	return ip_phy_write(state, port, reg, (val & ~mask) | data);
+}
+
+static int getPhy(struct ip17xx_state *state, reg mii)
+{
+	if (!REG_SUPP(mii))
+		return -EFAULT;
+	return ip_phy_read(state, mii.p, mii.m);
+}
+
+static int setPhy(struct ip17xx_state *state, reg mii, u16 value)
+{
+	int err;
+
+	if (!REG_SUPP(mii))
+		return -EFAULT;
+	err = ip_phy_write(state, mii.p, mii.m, value);
+	if (err < 0)
+		return err;
+	getPhy(state, mii);
+	return 0;
+}
+
+
+/**
+ * These two macros are to simplify the mapping of logical bits to the bits in hardware.
+ * NOTE: these macros will return if there is an error!
+ */
+
+#define GET_PORT_BITS(state, bits, addr, bit_lookup)		\
+	do {							\
+		int i, val = getPhy((state), (addr));		\
+		if (val < 0)					\
+			return val;				\
+		(bits) = 0;					\
+		for (i = 0; i < MAX_PORTS; i++) {		\
+			if ((bit_lookup)[i] == -1) continue;	\
+			if (val & (1<<(bit_lookup)[i]))		\
+				(bits) |= (1<<i);		\
+		}						\
+	} while (0)
+
+#define SET_PORT_BITS(state, bits, addr, bit_lookup)		\
+	do {							\
+		int i, val = getPhy((state), (addr));		\
+		if (val < 0)					\
+			return val;				\
+		for (i = 0; i < MAX_PORTS; i++) {		\
+			unsigned int newmask = ((bits)&(1<<i));	\
+			if ((bit_lookup)[i] == -1) continue;	\
+			val &= ~(1<<(bit_lookup)[i]);		\
+			val |= ((newmask>>i)<<(bit_lookup)[i]);	\
+		}						\
+		val = setPhy((state), (addr), val);		\
+		if (val < 0)					\
+			return val;				\
+	} while (0)
+
+
+static int get_model(struct ip17xx_state *state)
+{
+	int id1, id2;
+	int oui_id, model_no, rev_no, chip_no;
+
+	id1 = ip_phy_read(state, 0, 2);
+	id2 = ip_phy_read(state, 0, 3);
+	oui_id = (id1 << 6) | ((id2 >> 10) & 0x3f);
+	model_no = (id2 >> 4) & 0x3f;
+	rev_no = id2 & 0xf;
+	pr_debug("IP17xx: Identified oui=%06x model=%02x rev=%X\n", oui_id, model_no, rev_no);
+
+	if (oui_id != 0x0090c3)  // No other oui_id should have reached us anyway
+		return -ENODEV;
+
+	if (model_no == IP175A.MODEL_NO) {
+		state->regs = &IP175A;
+	} else if (model_no == IP175C.MODEL_NO) {
+		/*
+		 *  Several models share the same model_no:
+		 *  178C has more PHYs, so we try whether the device responds to a read from PHY5
+		 *  175D has a new chip ID register
+		 *  175C has neither
+		 */
+		if (ip_phy_read(state, 5, 2) == 0x0243) {
+			state->regs = &IP178C;
+		} else {
+			chip_no = ip_phy_read(state, 20, 0);
+			pr_debug("IP17xx: Chip ID register reads %04x\n", chip_no);
+			if (chip_no == 0x175d) {
+				state->regs = &IP175D;
+			} else {
+				state->regs = &IP175C;
+			}
+		}
+	} else {
+		pr_warning("IP17xx: Found an unknown IC+ switch with model number %02x, revision %X.\n", model_no, rev_no);
+		return -EPERM;
+	}
+	return 0;
+}
+
+/*** Low-level functions for the older models ***/
+
+/** Only set vlan and router flags in the switch **/
+static int ip175c_set_flags(struct ip17xx_state *state)
+{
+	int val;
+
+	if (!REG_SUPP(state->regs->ROUTER_CONTROL_REG)) {
+		return 0;
+	}
+
+	val = getPhy(state, state->regs->ROUTER_CONTROL_REG);
+	if (val < 0) {
+		return val;
+	}
+	if (state->regs->ROUTER_EN_BIT >= 0) {
+		if (state->router_mode) {
+			val |= (1<<state->regs->ROUTER_EN_BIT);
+		} else {
+			val &= (~(1<<state->regs->ROUTER_EN_BIT));
+		}
+	}
+	if (state->regs->TAG_VLAN_BIT >= 0) {
+		if (state->vlan_enabled) {
+			val |= (1<<state->regs->TAG_VLAN_BIT);
+		} else {
+			val &= (~(1<<state->regs->TAG_VLAN_BIT));
+		}
+	}
+	if (state->regs->NUMLAN_GROUPS_BIT >= 0) {
+		val &= (~((state->regs->NUMLAN_GROUPS_MAX-1)<<state->regs->NUMLAN_GROUPS_BIT));
+		if (state->num_vlans > state->regs->NUMLAN_GROUPS_MAX) {
+			val |= state->regs->NUMLAN_GROUPS_MAX << state->regs->NUMLAN_GROUPS_BIT;
+		} else if (state->num_vlans >= 1) {
+			val |= (state->num_vlans-1) << state->regs->NUMLAN_GROUPS_BIT;
+		}
+	}
+	return setPhy(state, state->regs->ROUTER_CONTROL_REG, val);
+}
+
+/** Set all VLAN and port state.  Usually you should call "correct_vlan_state" first. **/
+static int ip175c_set_state(struct ip17xx_state *state)
+{
+	int j;
+	int i;
+	SET_PORT_BITS(state, state->add_tag,
+				  state->regs->ADD_TAG_REG, state->regs->ADD_TAG_BIT);
+	SET_PORT_BITS(state, state->remove_tag,
+				  state->regs->REMOVE_TAG_REG, state->regs->REMOVE_TAG_BIT);
+
+	if (REG_SUPP(state->regs->VLAN_LOOKUP_REG)) {
+		for (j=0; j<state->regs->NUM_PORTS; j++) {
+			reg addr;
+			const bitnum *bit_lookup = (j%2==0)?
+				state->regs->VLAN_LOOKUP_EVEN_BIT:
+				state->regs->VLAN_LOOKUP_ODD_BIT;
+
+			addr = state->regs->VLAN_LOOKUP_REG;
+			if (state->regs->SIMPLE_VLAN_REGISTERS) {
+				addr.m += j;
+			} else {
+				switch (j) {
+				case 0:
+				case 1:
+					break;
+				case 2:
+				case 3:
+					addr.m+=1;
+					break;
+				case 4:
+					addr.m+=2;
+					break;
+				case 5:
+					addr = state->regs->VLAN_LOOKUP_REG_5;
+					break;
+				default:
+					addr.m = -1; // shouldn't get here, but...
+					break;
+				}
+			}
+			//printf("shareports for %d is %02X\n",j,state->ports[j].shareports);
+			if (REG_SUPP(addr)) {
+				SET_PORT_BITS(state, state->ports[j].shareports, addr, bit_lookup);
+			}
+		}
+	}
+	if (REG_SUPP(state->regs->TAG_VLAN_MASK_REG)) {
+		for (j=0; j<MAX_VLANS; j++) {
+			reg addr = state->regs->TAG_VLAN_MASK_REG;
+			const bitnum *bit_lookup = (j%2==0)?
+				state->regs->TAG_VLAN_MASK_EVEN_BIT:
+				state->regs->TAG_VLAN_MASK_ODD_BIT;
+			unsigned int vlan_mask;
+			if (state->regs->SIMPLE_VLAN_REGISTERS) {
+				addr.m += j;
+			} else {
+				addr.m += j/2;
+			}
+			vlan_mask = state->vlans[j].ports;
+			SET_PORT_BITS(state, vlan_mask, addr, bit_lookup);
+		}
+	}
+
+	for (i=0; i<MAX_PORTS; i++) {
+		if (REG_SUPP(state->regs->VLAN_DEFAULT_TAG_REG[i])) {
+			int err = setPhy(state, state->regs->VLAN_DEFAULT_TAG_REG[i],
+					state->ports[i].pvid);
+			if (err < 0) {
+				return err;
+			}
+		}
+	}
+
+	return ip175c_set_flags(state);
+}
+
+/**
+ *  Uses only the VLAN port mask and the add tag mask to generate the other fields:
+ *  which ports are part of the same VLAN, removing vlan tags, and VLAN tag ids.
+ */
+static void ip175c_correct_vlan_state(struct ip17xx_state *state)
+{
+	int i, j;
+	state->num_vlans = 0;
+	for (i=0; i<MAX_VLANS; i++) {
+		if (state->vlans[i].ports != 0) {
+			state->num_vlans = i+1; // Hack -- we need to store the "set" vlans somewhere...
+		}
+	}
+
+	for (i=0; i<state->regs->NUM_PORTS; i++) {
+		unsigned int portmask = (1<<i);
+		if (!state->vlan_enabled) {
+			// Share with everybody!
+			state->ports[i].shareports = (1<<state->regs->NUM_PORTS)-1;
+			continue;
+		}
+		state->ports[i].shareports = portmask;
+		for (j=0; j<MAX_VLANS; j++) {
+			if (state->vlans[j].ports & portmask)
+				state->ports[i].shareports |= state->vlans[j].ports;
+		}
+	}
+}
+
+static int ip175c_update_state(struct ip17xx_state *state)
+{
+	ip175c_correct_vlan_state(state);
+	return ip175c_set_state(state);
+}
+
+static int ip175c_set_vlan_mode(struct ip17xx_state *state)
+{
+	return ip175c_update_state(state);
+}
+
+static int ip175c_reset(struct ip17xx_state *state)
+{
+	int err;
+
+	if (REG_SUPP(state->regs->MODE_REG)) {
+		err = setPhy(state, state->regs->MODE_REG, state->regs->MODE_VAL);
+		if (err < 0)
+			return err;
+		err = getPhy(state, state->regs->MODE_REG);
+		if (err < 0)
+			return err;
+	}
+
+	return ip175c_update_state(state);
+}
+
+/*** Low-level functions for IP175D ***/
+
+static int ip175d_update_state(struct ip17xx_state *state)
+{
+	unsigned int filter_mask = 0;
+	unsigned int ports[16], add[16], rem[16];
+	int i, j;
+	int err = 0;
+
+	for (i = 0; i < 16; i++) {
+		ports[i] = 0;
+		add[i] = 0;
+		rem[i] = 0;
+		if (!state->vlan_enabled) {
+			err |= ip_phy_write(state, 22, 14+i, i+1);	// default tags
+			ports[i] = 0x3f;
+			continue;
+		}
+		if (!state->vlans[i].tag) {
+			// Reset the filter
+			err |= ip_phy_write(state, 22, 14+i, 0);	// tag
+			continue;
+		}
+		filter_mask |= 1 << i;
+		err |= ip_phy_write(state, 22, 14+i, state->vlans[i].tag);
+		ports[i] = state->vlans[i].ports;
+		for (j = 0; j < 6; j++) {
+			if (ports[i] & (1 << j)) {
+				if (state->add_tag & (1 << j))
+					add[i] |= 1 << j;
+				if (state->remove_tag & (1 << j))
+					rem[i] |= 1 << j;
+			}
+		}
+	}
+
+	// Port masks, tag adds and removals
+	for (i = 0; i < 8; i++) {
+		err |= ip_phy_write(state, 23, i, ports[2*i] | (ports[2*i+1] << 8));
+		err |= ip_phy_write(state, 23, 8+i, add[2*i] | (add[2*i+1] << 8));
+		err |= ip_phy_write(state, 23, 16+i, rem[2*i] | (rem[2*i+1] << 8));
+	}
+	err |= ip_phy_write(state, 22, 10, filter_mask);
+
+	// Default VLAN tag for each port
+	for (i = 0; i < 6; i++)
+		err |= ip_phy_write(state, 22, 4+i, state->vlans[state->ports[i].pvid].tag);
+
+	return (err ? -EIO : 0);
+}
+
+static int ip175d_set_vlan_mode(struct ip17xx_state *state)
+{
+	int i;
+	int err = 0;
+
+	if (state->vlan_enabled) {
+		// VLAN classification rules: tag-based VLANs, use VID to classify,
+		// drop packets that cannot be classified.
+		err |= ip_phy_write_masked(state, 22, 0, 0x3fff, 0x003f);
+
+		// Ingress rules: CFI=1 dropped, null VID is untagged, VID=1 passed,
+		// VID=0xfff discarded, admin both tagged and untagged, ingress
+		// filters enabled.
+		err |= ip_phy_write_masked(state, 22, 1, 0x0fff, 0x0c3f);
+
+		// Egress rules: IGMP processing off, keep VLAN header off
+		err |= ip_phy_write_masked(state, 22, 2, 0x0fff, 0x0000);
+	} else {
+		// VLAN classification rules: everything off & clear table
+		err |= ip_phy_write_masked(state, 22, 0, 0xbfff, 0x8000);
+
+		// Ingress and egress rules: set to defaults
+		err |= ip_phy_write_masked(state, 22, 1, 0x0fff, 0x0c3f);
+		err |= ip_phy_write_masked(state, 22, 2, 0x0fff, 0x0000);
+	}
+
+	// Reset default VLAN for each port to 0
+	for (i = 0; i < 6; i++)
+		state->ports[i].pvid = 0;
+
+	err |= ip175d_update_state(state);
+
+	return (err ? -EIO : 0);
+}
+
+static int ip175d_reset(struct ip17xx_state *state)
+{
+	int err = 0;
+
+	// Disable the special tagging mode
+	err |= ip_phy_write_masked(state, 21, 22, 0x0003, 0x0000);
+
+	// Set 802.1q protocol type
+	err |= ip_phy_write(state, 22, 3, 0x8100);
+
+	state->vlan_enabled = 0;
+	err |= ip175d_set_vlan_mode(state);
+
+	return (err ? -EIO : 0);
+}
+
+/*** High-level functions ***/
+
+static int ip17xx_get_enable_vlan(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	struct ip17xx_state *state = dev->priv;
+
+	val->value.i = state->vlan_enabled;
+	return 0;
+}
+
+static void ip17xx_reset_vlan_config(struct ip17xx_state *state)
+{
+	int i;
+
+	state->remove_tag = (state->vlan_enabled ? ((1<<state->regs->NUM_PORTS)-1) : 0x0000);
+	state->add_tag = 0x0000;
+	for (i = 0; i < MAX_VLANS; i++) {
+		state->vlans[i].ports = 0x0000;
+		state->vlans[i].tag = (i ? i : 16);
+	}
+	for (i = 0; i < MAX_PORTS; i++)
+		state->ports[i].pvid = 0;
+}
+
+static int ip17xx_set_enable_vlan(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	struct ip17xx_state *state = dev->priv;
+	int enable;
+
+	enable = val->value.i;
+	if (state->vlan_enabled == enable) {
+		// Do not change any state.
+		return 0;
+	}
+	state->vlan_enabled = enable;
+
+	// Otherwise, if we are switching state, set fields to a known default.
+	ip17xx_reset_vlan_config(state);
+
+	return state->regs->set_vlan_mode(state);
+}
+
+static int ip17xx_get_ports(struct switch_dev *dev, struct switch_val *val)
+{
+	struct ip17xx_state *state = dev->priv;
+	int b;
+	int ind;
+	unsigned int ports;
+
+	if (val->port_vlan >= dev->vlans || val->port_vlan < 0)
+		return -EINVAL;
+
+	ports = state->vlans[val->port_vlan].ports;
+	b = 0;
+	ind = 0;
+	while (b < MAX_PORTS) {
+		if (ports&1) {
+			int istagged = ((state->add_tag >> b) & 1);
+			val->value.ports[ind].id = b;
+			val->value.ports[ind].flags = (istagged << SWITCH_PORT_FLAG_TAGGED);
+			ind++;
+		}
+		b++;
+		ports >>= 1;
+	}
+	val->len = ind;
+
+	return 0;
+}
+
+static int ip17xx_set_ports(struct switch_dev *dev, struct switch_val *val)
+{
+	struct ip17xx_state *state = dev->priv;
+	int i;
+
+	if (val->port_vlan >= dev->vlans || val->port_vlan < 0)
+		return -EINVAL;
+
+	state->vlans[val->port_vlan].ports = 0;
+	for (i = 0; i < val->len; i++) {
+		unsigned int bitmask = (1<<val->value.ports[i].id);
+		state->vlans[val->port_vlan].ports |= bitmask;
+		if (val->value.ports[i].flags & (1<<SWITCH_PORT_FLAG_TAGGED)) {
+			state->add_tag |= bitmask;
+			state->remove_tag &= (~bitmask);
+		} else {
+			state->add_tag &= (~bitmask);
+			state->remove_tag |= bitmask;
+		}
+	}
+
+	return state->regs->update_state(state);
+}
+
+static int ip17xx_apply(struct switch_dev *dev)
+{
+	struct ip17xx_state *state = dev->priv;
+
+	if (REG_SUPP(state->regs->MII_REGISTER_EN)) {
+		int val = getPhy(state, state->regs->MII_REGISTER_EN);
+		if (val < 0) {
+			return val;
+		}
+		val |= (1<<state->regs->MII_REGISTER_EN_BIT);
+		return setPhy(state, state->regs->MII_REGISTER_EN, val);
+	}
+	return 0;
+}
+
+static int ip17xx_reset(struct switch_dev *dev)
+{
+	struct ip17xx_state *state = dev->priv;
+	int i, err;
+
+	if (REG_SUPP(state->regs->RESET_REG)) {
+		err = setPhy(state, state->regs->RESET_REG, state->regs->RESET_VAL);
+		if (err < 0)
+			return err;
+		err = getPhy(state, state->regs->RESET_REG);
+
+		/*
+		 *  Data sheet specifies reset period to be 2 msec.
+		 *  (I don't see any mention of the 2ms delay in the IP178C spec, only
+		 *  in IP175C, but it can't hurt.)
+		 */
+		mdelay(2);
+	}
+
+	/* reset switch ports */
+	for (i = 0; i < state->regs->NUM_PORTS-1; i++) {
+		err = ip_phy_write(state, i, MII_BMCR, BMCR_RESET);
+		if (err < 0)
+			return err;
+	}
+
+	state->router_mode = 0;
+	state->vlan_enabled = 0;
+	ip17xx_reset_vlan_config(state);
+
+	return state->regs->reset(state);
+}
+
+static int ip17xx_get_tagged(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	struct ip17xx_state *state = dev->priv;
+
+	if (state->add_tag & (1<<val->port_vlan)) {
+		if (state->remove_tag & (1<<val->port_vlan))
+			val->value.i = 3; // shouldn't ever happen.
+		else
+			val->value.i = 1;
+	} else {
+		if (state->remove_tag & (1<<val->port_vlan))
+			val->value.i = 0;
+		else
+			val->value.i = 2;
+	}
+	return 0;
+}
+
+static int ip17xx_set_tagged(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	struct ip17xx_state *state = dev->priv;
+
+	state->add_tag &= ~(1<<val->port_vlan);
+	state->remove_tag &= ~(1<<val->port_vlan);
+
+	if (val->value.i == 0)
+		state->remove_tag |= (1<<val->port_vlan);
+	if (val->value.i == 1)
+		state->add_tag |= (1<<val->port_vlan);
+
+	return state->regs->update_state(state);
+}
+
+/** Get the current phy address */
+static int ip17xx_get_phy(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	struct ip17xx_state *state = dev->priv;
+
+	val->value.i = state->proc_mii.p;
+	return 0;
+}
+
+/** Set a new phy address for low level access to registers */
+static int ip17xx_set_phy(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	struct ip17xx_state *state = dev->priv;
+	int new_reg = val->value.i;
+
+	if (new_reg < 0 || new_reg > 31)
+		state->proc_mii.p = (u16)-1;
+	else
+		state->proc_mii.p = (u16)new_reg;
+	return 0;
+}
+
+/** Get the current register number */
+static int ip17xx_get_reg(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	struct ip17xx_state *state = dev->priv;
+
+	val->value.i = state->proc_mii.m;
+	return 0;
+}
+
+/** Set a new register address for low level access to registers */
+static int ip17xx_set_reg(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	struct ip17xx_state *state = dev->priv;
+	int new_reg = val->value.i;
+
+	if (new_reg < 0 || new_reg > 31)
+		state->proc_mii.m = (u16)-1;
+	else
+		state->proc_mii.m = (u16)new_reg;
+	return 0;
+}
+
+/** Get the register content of state->proc_mii */
+static int ip17xx_get_val(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	struct ip17xx_state *state = dev->priv;
+	int retval = -EINVAL;
+	if (REG_SUPP(state->proc_mii))
+		retval = getPhy(state, state->proc_mii);
+
+	if (retval < 0) {
+		return retval;
+	} else {
+		val->value.i = retval;
+		return 0;
+	}
+}
+
+/** Write a value to the register defined by phy/reg above */
+static int ip17xx_set_val(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	struct ip17xx_state *state = dev->priv;
+	int myval, err = -EINVAL;
+
+	myval = val->value.i;
+	if (myval <= 0xffff && myval >= 0 && REG_SUPP(state->proc_mii)) {
+		err = setPhy(state, state->proc_mii, (u16)myval);
+	}
+	return err;
+}
+
+static int ip17xx_read_name(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	struct ip17xx_state *state = dev->priv;
+	val->value.s = state->regs->NAME; // Just a const pointer, won't be freed by swconfig.
+	return 0;
+}
+
+static int ip17xx_get_tag(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	struct ip17xx_state *state = dev->priv;
+	int vlan = val->port_vlan;
+
+	if (vlan < 0 || vlan >= MAX_VLANS)
+		return -EINVAL;
+
+	val->value.i = state->vlans[vlan].tag;
+	return 0;
+}
+
+static int ip17xx_set_tag(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	struct ip17xx_state *state = dev->priv;
+	int vlan = val->port_vlan;
+	int tag = val->value.i;
+
+	if (vlan < 0 || vlan >= MAX_VLANS)
+		return -EINVAL;
+
+	if (tag < 0 || tag > 4095)
+		return -EINVAL;
+
+	state->vlans[vlan].tag = tag;
+	return state->regs->update_state(state);
+}
+
+static int ip17xx_set_port_speed(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	struct ip17xx_state *state = dev->priv;
+	int nr = val->port_vlan;
+	int ctrl;
+	int autoneg;
+	int speed;
+	if (val->value.i == 100) {
+		speed = 1;
+		autoneg = 0;
+	} else if (val->value.i == 10) {
+		speed = 0;
+		autoneg = 0;
+	} else {
+		autoneg = 1;
+		speed = 1;
+	}
+
+	/* Can't set speed for cpu port */
+	if (nr == state->regs->CPU_PORT)
+		return -EINVAL;
+
+	if (nr >= dev->ports || nr < 0)
+		return -EINVAL;
+
+	ctrl = ip_phy_read(state, nr, 0);
+	if (ctrl < 0)
+		return -EIO;
+
+	ctrl &= (~(1<<12));
+	ctrl &= (~(1<<13));
+	ctrl |= (autoneg<<12);
+	ctrl |= (speed<<13);
+
+	return ip_phy_write(state, nr, 0, ctrl);
+}
+
+static int ip17xx_get_port_speed(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	struct ip17xx_state *state = dev->priv;
+	int nr = val->port_vlan;
+	int speed, status;
+
+	if (nr == state->regs->CPU_PORT) {
+		val->value.i = 100;
+		return 0;
+	}
+
+	if (nr >= dev->ports || nr < 0)
+		return -EINVAL;
+
+	status = ip_phy_read(state, nr, 1);
+	speed = ip_phy_read(state, nr, 18);
+	if (status < 0 || speed < 0)
+		return -EIO;
+
+	if (status & 4)
+		val->value.i = ((speed & (1<<11)) ? 100 : 10);
+	else
+		val->value.i = 0;
+
+	return 0;
+}
+
+static int ip17xx_get_port_status(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	struct ip17xx_state *state = dev->priv;
+	int ctrl, speed, status;
+	int nr = val->port_vlan;
+	int len;
+	char *buf = state->buf; // fixed-length at 80.
+
+	if (nr == state->regs->CPU_PORT) {
+		sprintf(buf, "up, 100 Mbps, cpu port");
+		val->value.s = buf;
+		return 0;
+	}
+
+	if (nr >= dev->ports || nr < 0)
+		return -EINVAL;
+
+	ctrl = ip_phy_read(state, nr, 0);
+	status = ip_phy_read(state, nr, 1);
+	speed = ip_phy_read(state, nr, 18);
+	if (ctrl < 0 || status < 0 || speed < 0)
+		return -EIO;
+
+	if (status & 4)
+		len = sprintf(buf, "up, %d Mbps, %s duplex",
+			((speed & (1<<11)) ? 100 : 10),
+			((speed & (1<<10)) ? "full" : "half"));
+	else
+		len = sprintf(buf, "down");
+
+	if (ctrl & (1<<12)) {
+		len += sprintf(buf+len, ", auto-negotiate");
+		if (!(status & (1<<5)))
+			len += sprintf(buf+len, " (in progress)");
+	} else {
+		len += sprintf(buf+len, ", fixed speed (%d)",
+			((ctrl & (1<<13)) ? 100 : 10));
+	}
+
+	buf[len] = '\0';
+	val->value.s = buf;
+	return 0;
+}
+
+static int ip17xx_get_pvid(struct switch_dev *dev, int port, int *val)
+{
+	struct ip17xx_state *state = dev->priv;
+
+	*val = state->ports[port].pvid;
+	return 0;
+}
+
+static int ip17xx_set_pvid(struct switch_dev *dev, int port, int val)
+{
+	struct ip17xx_state *state = dev->priv;
+
+	if (val < 0 || val >= MAX_VLANS)
+		return -EINVAL;
+
+	state->ports[port].pvid = val;
+	return state->regs->update_state(state);
+}
+
+
+enum Ports {
+	IP17XX_PORT_STATUS,
+	IP17XX_PORT_LINK,
+	IP17XX_PORT_TAGGED,
+	IP17XX_PORT_PVID,
+};
+
+enum Globals {
+	IP17XX_ENABLE_VLAN,
+	IP17XX_GET_NAME,
+	IP17XX_REGISTER_PHY,
+	IP17XX_REGISTER_MII,
+	IP17XX_REGISTER_VALUE,
+	IP17XX_REGISTER_ERRNO,
+};
+
+enum Vlans {
+	IP17XX_VLAN_TAG,
+};
+
+static const struct switch_attr ip17xx_global[] = {
+	[IP17XX_ENABLE_VLAN] = {
+		.id = IP17XX_ENABLE_VLAN,
+		.type = SWITCH_TYPE_INT,
+		.name  = "enable_vlan",
+		.description = "Flag to enable or disable VLANs and tagging",
+		.get  = ip17xx_get_enable_vlan,
+		.set = ip17xx_set_enable_vlan,
+	},
+	[IP17XX_GET_NAME] = {
+		.id = IP17XX_GET_NAME,
+		.type = SWITCH_TYPE_STRING,
+		.description = "Returns the type of IC+ chip.",
+		.name  = "name",
+		.get  = ip17xx_read_name,
+		.set = NULL,
+	},
+	/* jal: added for low level debugging etc. */
+	[IP17XX_REGISTER_PHY] = {
+		.id = IP17XX_REGISTER_PHY,
+		.type = SWITCH_TYPE_INT,
+		.description = "Direct register access: set PHY (0-4, or 29,30,31)",
+		.name  = "phy",
+		.get  = ip17xx_get_phy,
+		.set = ip17xx_set_phy,
+	},
+	[IP17XX_REGISTER_MII] = {
+		.id = IP17XX_REGISTER_MII,
+		.type = SWITCH_TYPE_INT,
+		.description = "Direct register access: set MII register number (0-31)",
+		.name  = "reg",
+		.get  = ip17xx_get_reg,
+		.set = ip17xx_set_reg,
+	},
+	[IP17XX_REGISTER_VALUE] = {
+		.id = IP17XX_REGISTER_VALUE,
+		.type = SWITCH_TYPE_INT,
+		.description = "Direct register access: read/write to register (0-65535)",
+		.name  = "val",
+		.get  = ip17xx_get_val,
+		.set = ip17xx_set_val,
+	},
+};
+
+static const struct switch_attr ip17xx_vlan[] = {
+	[IP17XX_VLAN_TAG] = {
+		.id = IP17XX_VLAN_TAG,
+		.type = SWITCH_TYPE_INT,
+		.description = "VLAN tag (0-4095) [IP175D only]",
+		.name = "tag",
+		.get = ip17xx_get_tag,
+		.set = ip17xx_set_tag,
+	}
+};
+
+static const struct switch_attr ip17xx_port[] = {
+	[IP17XX_PORT_STATUS] = {
+		.id = IP17XX_PORT_STATUS,
+		.type = SWITCH_TYPE_STRING,
+		.description = "Returns Detailed port status",
+		.name  = "status",
+		.get  = ip17xx_get_port_status,
+		.set = NULL,
+	},
+	[IP17XX_PORT_LINK] = {
+		.id = IP17XX_PORT_LINK,
+		.type = SWITCH_TYPE_INT,
+		.description = "Link speed. Can write 0 for auto-negotiate, or 10 or 100",
+		.name  = "link",
+		.get  = ip17xx_get_port_speed,
+		.set = ip17xx_set_port_speed,
+	},
+	[IP17XX_PORT_TAGGED] = {
+		.id = IP17XX_PORT_LINK,
+		.type = SWITCH_TYPE_INT,
+		.description = "0 = untag, 1 = add tags, 2 = do not alter (This value is reset if vlans are altered)",
+		.name  = "tagged",
+		.get  = ip17xx_get_tagged,
+		.set = ip17xx_set_tagged,
+	},
+};
+
+static int ip17xx_probe(struct phy_device *pdev)
+{
+	struct ip17xx_state *state;
+	struct switch_dev *dev;
+	int err;
+
+	/* We only attach to PHY 0, but use all available PHYs */
+	if (pdev->addr != 0)
+		return -ENODEV;
+
+	state = kzalloc(sizeof(*state), GFP_KERNEL);
+	if (!state)
+		return -ENOMEM;
+
+	dev = &state->dev;
+	dev->attr_global.attr = ip17xx_global;
+	dev->attr_global.n_attr = ARRAY_SIZE(ip17xx_global);
+	dev->attr_port.attr = ip17xx_port;
+	dev->attr_port.n_attr = ARRAY_SIZE(ip17xx_port);
+	dev->attr_vlan.attr = ip17xx_vlan;
+	dev->attr_vlan.n_attr = ARRAY_SIZE(ip17xx_vlan);
+
+	dev->get_port_pvid = ip17xx_get_pvid;
+	dev->set_port_pvid = ip17xx_set_pvid;
+	dev->get_vlan_ports = ip17xx_get_ports;
+	dev->set_vlan_ports = ip17xx_set_ports;
+	dev->apply_config = ip17xx_apply;
+	dev->reset_switch = ip17xx_reset;
+
+	dev->priv = state;
+	pdev->priv = state;
+	state->mii_bus = pdev->bus;
+
+	err = get_model(state);
+	if (err < 0)
+		goto error;
+
+	dev->vlans = MAX_VLANS;
+	dev->cpu_port = state->regs->CPU_PORT;
+	dev->ports = state->regs->NUM_PORTS;
+	dev->name = state->regs->NAME;
+
+	pr_info("IP17xx: Found %s at %s\n", dev->name, dev_name(&pdev->dev));
+	return 0;
+
+error:
+	kfree(state);
+	return err;
+}
+
+static int ip17xx_config_init(struct phy_device *pdev)
+{
+	struct ip17xx_state *state = pdev->priv;
+	struct net_device *dev = pdev->attached_dev;
+	int err;
+
+	err = register_switch(&state->dev, dev);
+	if (err < 0)
+		return err;
+
+	state->registered = true;
+	ip17xx_reset(&state->dev);
+	return 0;
+}
+
+static void ip17xx_remove(struct phy_device *pdev)
+{
+	struct ip17xx_state *state = pdev->priv;
+
+	if (state->registered)
+		unregister_switch(&state->dev);
+	kfree(state);
+}
+
+static int ip17xx_config_aneg(struct phy_device *pdev)
+{
+	return 0;
+}
+
+static int ip17xx_aneg_done(struct phy_device *pdev)
+{
+	return BMSR_ANEGCOMPLETE;
+}
+
+static int ip17xx_update_link(struct phy_device *pdev)
+{
+	pdev->link = 1;
+	return 0;
+}
+
+static int ip17xx_read_status(struct phy_device *pdev)
+{
+	pdev->speed = SPEED_100;
+	pdev->duplex = DUPLEX_FULL;
+	pdev->pause = pdev->asym_pause = 0;
+	pdev->link = 1;
+
+	return 0;
+}
+
+static struct phy_driver ip17xx_driver = {
+	.name		= "IC+ IP17xx",
+	.phy_id		= 0x02430c00,
+	.phy_id_mask	= 0x0ffffc00,
+	.features	= PHY_BASIC_FEATURES,
+	.probe		= ip17xx_probe,
+	.remove		= ip17xx_remove,
+	.config_init	= ip17xx_config_init,
+	.config_aneg	= ip17xx_config_aneg,
+	.aneg_done	= ip17xx_aneg_done,
+	.update_link	= ip17xx_update_link,
+	.read_status	= ip17xx_read_status,
+	.driver		= { .owner = THIS_MODULE },
+};
+
+static struct phy_driver ip175a_driver = {
+	.name		= "IC+ IP175A",
+	.phy_id		= 0x02430c50,
+	.phy_id_mask	= 0x0ffffff0,
+	.features	= PHY_BASIC_FEATURES,
+	.probe		= ip17xx_probe,
+	.remove		= ip17xx_remove,
+	.config_init	= ip17xx_config_init,
+	.config_aneg	= ip17xx_config_aneg,
+	.aneg_done	= ip17xx_aneg_done,
+	.update_link	= ip17xx_update_link,
+	.read_status	= ip17xx_read_status,
+	.driver		= { .owner = THIS_MODULE },
+};
+
+
+int __init ip17xx_init(void)
+{
+	int ret;
+
+	ret = phy_driver_register(&ip175a_driver);
+	if (ret < 0)
+		return ret;
+
+	return phy_driver_register(&ip17xx_driver);
+}
+
+void __exit ip17xx_exit(void)
+{
+	phy_driver_unregister(&ip17xx_driver);
+	phy_driver_unregister(&ip175a_driver);
+}
+
+MODULE_AUTHOR("Patrick Horn <patrick.horn@gmail.com>");
+MODULE_AUTHOR("Felix Fietkau <nbd@openwrt.org>");
+MODULE_AUTHOR("Martin Mares <mj@ucw.cz>");
+MODULE_LICENSE("GPL");
+
+module_init(ip17xx_init);
+module_exit(ip17xx_exit);
diff --git a/target/linux/generic/files/drivers/net/phy/mvswitch.c b/target/linux/generic/files/drivers/net/phy/mvswitch.c
new file mode 100644
index 0000000000..c2f3245720
--- /dev/null
+++ b/target/linux/generic/files/drivers/net/phy/mvswitch.c
@@ -0,0 +1,468 @@
+/*
+ * Marvell 88E6060 switch driver
+ * Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of the GNU General Public License v2 as published by the
+ * Free Software Foundation
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+#include <linux/if_vlan.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include "mvswitch.h"
+
+/* Undefine this to use trailer mode instead.
+ * I don't know if header mode works with all chips */
+#define HEADER_MODE	1
+
+MODULE_DESCRIPTION("Marvell 88E6060 Switch driver");
+MODULE_AUTHOR("Felix Fietkau");
+MODULE_LICENSE("GPL");
+
+#define MVSWITCH_MAGIC 0x88E6060
+
+struct mvswitch_priv {
+	const struct net_device_ops *ndo_old;
+	struct net_device_ops ndo;
+	struct vlan_group *grp;
+	u8 vlans[16];
+};
+
+#define to_mvsw(_phy) ((struct mvswitch_priv *) (_phy)->priv)
+
+static inline u16
+r16(struct phy_device *phydev, int addr, int reg)
+{
+	return phydev->bus->read(phydev->bus, addr, reg);
+}
+
+static inline void
+w16(struct phy_device *phydev, int addr, int reg, u16 val)
+{
+	phydev->bus->write(phydev->bus, addr, reg, val);
+}
+
+
+static int
+mvswitch_mangle_tx(struct sk_buff *skb, struct net_device *dev)
+{
+	struct mvswitch_priv *priv;
+	char *buf = NULL;
+	u16 vid;
+
+	priv = dev->phy_ptr;
+	if (unlikely(!priv))
+		goto error;
+
+	if (unlikely(skb->len < 16))
+		goto error;
+
+#ifdef HEADER_MODE
+	if (__vlan_hwaccel_get_tag(skb, &vid))
+		goto error;
+
+	if (skb_cloned(skb) || (skb->len <= 62) || (skb_headroom(skb) < MV_HEADER_SIZE)) {
+		if (pskb_expand_head(skb, MV_HEADER_SIZE, (skb->len < 62 ? 62 - skb->len : 0), GFP_ATOMIC))
+			goto error_expand;
+		if (skb->len < 62)
+			skb->len = 62;
+	}
+	buf = skb_push(skb, MV_HEADER_SIZE);
+#else
+	if (__vlan_get_tag(skb, &vid))
+		goto error;
+
+	if (unlikely((vid > 15 || !priv->vlans[vid])))
+		goto error;
+
+	if (skb->len <= 64) {
+		if (pskb_expand_head(skb, 0, 64 + MV_TRAILER_SIZE - skb->len, GFP_ATOMIC))
+			goto error_expand;
+
+		buf = skb->data + 64;
+		skb->len = 64 + MV_TRAILER_SIZE;
+	} else {
+		if (skb_cloned(skb) || unlikely(skb_tailroom(skb) < 4)) {
+			if (pskb_expand_head(skb, 0, 4, GFP_ATOMIC))
+				goto error_expand;
+		}
+		buf = skb_put(skb, 4);
+	}
+
+	/* move the ethernet header 4 bytes forward, overwriting the vlan tag */
+	memmove(skb->data + 4, skb->data, 12);
+	skb->data += 4;
+	skb->len -= 4;
+	skb->mac_header += 4;
+#endif
+
+	if (!buf)
+		goto error;
+
+
+#ifdef HEADER_MODE
+	/* prepend the tag */
+	*((__be16 *) buf) = cpu_to_be16(
+		((vid << MV_HEADER_VLAN_S) & MV_HEADER_VLAN_M) |
+		((priv->vlans[vid] << MV_HEADER_PORTS_S) & MV_HEADER_PORTS_M)
+	);
+#else
+	/* append the tag */
+	*((__be32 *) buf) = cpu_to_be32((
+		(MV_TRAILER_OVERRIDE << MV_TRAILER_FLAGS_S) |
+		((priv->vlans[vid] & MV_TRAILER_PORTS_M) << MV_TRAILER_PORTS_S)
+	));
+#endif
+
+	return priv->ndo_old->ndo_start_xmit(skb, dev);
+
+error_expand:
+	if (net_ratelimit())
+		printk("%s: failed to expand/update skb for the switch\n", dev->name);
+
+error:
+	/* any errors? drop the packet! */
+	dev_kfree_skb_any(skb);
+	return 0;
+}
+
+static int
+mvswitch_mangle_rx(struct sk_buff *skb, int napi)
+{
+	struct mvswitch_priv *priv;
+	struct net_device *dev;
+	int vlan = -1;
+	unsigned char *buf;
+	int i;
+
+	dev = skb->dev;
+	if (!dev)
+		goto error;
+
+	priv = dev->phy_ptr;
+	if (!priv)
+		goto error;
+
+	if (!priv->grp)
+		goto error;
+
+#ifdef HEADER_MODE
+	buf = skb->data;
+	skb_pull(skb, MV_HEADER_SIZE);
+#else
+	buf = skb->data + skb->len - MV_TRAILER_SIZE;
+	if (buf[0] != 0x80)
+		goto error;
+#endif
+
+	/* look for the vlan matching the incoming port */
+	for (i = 0; i < ARRAY_SIZE(priv->vlans); i++) {
+		if ((1 << buf[1]) & priv->vlans[i])
+			vlan = i;
+	}
+
+	if (vlan == -1)
+		goto error;
+
+	skb->protocol = eth_type_trans(skb, skb->dev);
+
+	if (napi)
+		return vlan_hwaccel_receive_skb(skb, priv->grp, vlan);
+	else
+		return vlan_hwaccel_rx(skb, priv->grp, vlan);
+
+error:
+	/* no vlan? eat the packet! */
+	dev_kfree_skb_any(skb);
+	return 0;
+}
+
+
+static int
+mvswitch_netif_rx(struct sk_buff *skb)
+{
+	return mvswitch_mangle_rx(skb, 0);
+}
+
+static int
+mvswitch_netif_receive_skb(struct sk_buff *skb)
+{
+	return mvswitch_mangle_rx(skb, 1);
+}
+
+
+static void
+mvswitch_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
+{
+	struct mvswitch_priv *priv = dev->phy_ptr;
+	priv->grp = grp;
+}
+
+
+static int
+mvswitch_wait_mask(struct phy_device *pdev, int addr, int reg, u16 mask, u16 val)
+{
+	int i = 100;
+	u16 r;
+
+	do {
+		r = r16(pdev, addr, reg) & mask;
+		if (r == val)
+			return 0;
+	} while(--i > 0);
+	return -ETIMEDOUT;
+}
+
+static int
+mvswitch_config_init(struct phy_device *pdev)
+{
+	struct mvswitch_priv *priv = to_mvsw(pdev);
+	struct net_device *dev = pdev->attached_dev;
+	u8 vlmap = 0;
+	int i;
+
+	if (!dev)
+		return -EINVAL;
+
+	printk("%s: Marvell 88E6060 PHY driver attached.\n", dev->name);
+	pdev->supported = ADVERTISED_100baseT_Full;
+	pdev->advertising = ADVERTISED_100baseT_Full;
+	dev->phy_ptr = priv;
+	dev->irq = PHY_POLL;
+#ifdef HEADER_MODE
+	dev->flags |= IFF_PROMISC;
+#endif
+
+	/* initialize default vlans */
+	for (i = 0; i < MV_PORTS; i++)
+		priv->vlans[(i == MV_WANPORT ? 2 : 1)] |= (1 << i);
+
+	/* before entering reset, disable all ports */
+	for (i = 0; i < MV_PORTS; i++)
+		w16(pdev, MV_PORTREG(CONTROL, i), 0x00);
+
+	msleep(2); /* wait for the status change to settle in */
+
+	/* put the ATU in reset */
+	w16(pdev, MV_SWITCHREG(ATU_CTRL), MV_ATUCTL_RESET);
+
+	i = mvswitch_wait_mask(pdev, MV_SWITCHREG(ATU_CTRL), MV_ATUCTL_RESET, 0);
+	if (i < 0) {
+		printk("%s: Timeout waiting for the switch to reset.\n", dev->name);
+		return i;
+	}
+
+	/* set the ATU flags */
+	w16(pdev, MV_SWITCHREG(ATU_CTRL),
+		MV_ATUCTL_NO_LEARN |
+		MV_ATUCTL_ATU_1K |
+		MV_ATUCTL_AGETIME(MV_ATUCTL_AGETIME_MIN) /* minimum without disabling ageing */
+	);
+
+	/* initialize the cpu port */
+	w16(pdev, MV_PORTREG(CONTROL, MV_CPUPORT),
+#ifdef HEADER_MODE
+		MV_PORTCTRL_HEADER |
+#else
+		MV_PORTCTRL_RXTR |
+		MV_PORTCTRL_TXTR |
+#endif
+		MV_PORTCTRL_ENABLED
+	);
+	/* wait for the phy change to settle in */
+	msleep(2);
+	for (i = 0; i < MV_PORTS; i++) {
+		u8 pvid = 0;
+		int j;
+
+		vlmap = 0;
+
+		/* look for the matching vlan */
+		for (j = 0; j < ARRAY_SIZE(priv->vlans); j++) {
+			if (priv->vlans[j] & (1 << i)) {
+				vlmap = priv->vlans[j];
+				pvid = j;
+			}
+		}
+		/* leave port unconfigured if it's not part of a vlan */
+		if (!vlmap)
+			continue;
+
+		/* add the cpu port to the allowed destinations list */
+		vlmap |= (1 << MV_CPUPORT);
+
+		/* take port out of its own vlan destination map */
+		vlmap &= ~(1 << i);
+
+		/* apply vlan settings */
+		w16(pdev, MV_PORTREG(VLANMAP, i),
+			MV_PORTVLAN_PORTS(vlmap) |
+			MV_PORTVLAN_ID(i)
+		);
+
+		/* re-enable port */
+		w16(pdev, MV_PORTREG(CONTROL, i),
+			MV_PORTCTRL_ENABLED
+		);
+	}
+
+	w16(pdev, MV_PORTREG(VLANMAP, MV_CPUPORT),
+		MV_PORTVLAN_ID(MV_CPUPORT)
+	);
+
+	/* set the port association vector */
+	for (i = 0; i <= MV_PORTS; i++) {
+		w16(pdev, MV_PORTREG(ASSOC, i),
+			MV_PORTASSOC_PORTS(1 << i)
+		);
+	}
+
+	/* init switch control */
+	w16(pdev, MV_SWITCHREG(CTRL),
+		MV_SWITCHCTL_MSIZE |
+		MV_SWITCHCTL_DROP
+	);
+
+	/* hook into the tx function */
+	priv->ndo_old = dev->netdev_ops;
+	memcpy(&priv->ndo, priv->ndo_old, sizeof(struct net_device_ops));
+	priv->ndo.ndo_start_xmit = mvswitch_mangle_tx;
+	priv->ndo.ndo_vlan_rx_register = mvswitch_vlan_rx_register;
+	dev->netdev_ops = &priv->ndo;
+
+	pdev->pkt_align = 2;
+	pdev->netif_receive_skb = mvswitch_netif_receive_skb;
+	pdev->netif_rx = mvswitch_netif_rx;
+#ifdef HEADER_MODE
+	dev->features |= NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX;
+#else
+	dev->features |= NETIF_F_HW_VLAN_RX;
+#endif
+
+	return 0;
+}
+
+static int
+mvswitch_read_status(struct phy_device *pdev)
+{
+	pdev->speed = SPEED_100;
+	pdev->duplex = DUPLEX_FULL;
+	pdev->link = 1;
+
+	/* XXX ugly workaround: we can't force the switch
+	 * to gracefully handle hosts moving from one port to another,
+	 * so we have to regularly clear the ATU database */
+
+	/* wait for the ATU to become available */
+	mvswitch_wait_mask(pdev, MV_SWITCHREG(ATU_OP), MV_ATUOP_INPROGRESS, 0);
+
+	/* flush the ATU */
+	w16(pdev, MV_SWITCHREG(ATU_OP),
+		MV_ATUOP_INPROGRESS |
+		MV_ATUOP_FLUSH_ALL
+	);
+
+	/* wait for operation to complete */
+	mvswitch_wait_mask(pdev, MV_SWITCHREG(ATU_OP), MV_ATUOP_INPROGRESS, 0);
+
+	return 0;
+}
+
+static int
+mvswitch_config_aneg(struct phy_device *phydev)
+{
+	return 0;
+}
+
+static void
+mvswitch_remove(struct phy_device *pdev)
+{
+	struct mvswitch_priv *priv = to_mvsw(pdev);
+	struct net_device *dev = pdev->attached_dev;
+
+	/* restore old netdev ops */
+	if (priv->ndo_old && dev)
+		dev->netdev_ops = priv->ndo_old;
+	dev->phy_ptr = NULL;
+	dev->features &= ~NETIF_F_HW_VLAN_RX;
+	kfree(priv);
+}
+
+static int
+mvswitch_probe(struct phy_device *pdev)
+{
+	struct mvswitch_priv *priv;
+
+	priv = kzalloc(sizeof(struct mvswitch_priv), GFP_KERNEL);
+	if (priv == NULL)
+		return -ENOMEM;
+
+	pdev->priv = priv;
+
+	return 0;
+}
+
+static int
+mvswitch_fixup(struct phy_device *dev)
+{
+	u16 reg;
+
+	if (dev->addr != 0x10)
+		return 0;
+
+	reg = dev->bus->read(dev->bus, MV_PORTREG(IDENT, 0)) & MV_IDENT_MASK;
+	if (reg != MV_IDENT_VALUE)
+		return 0;
+
+	dev->phy_id = MVSWITCH_MAGIC;
+	return 0;
+}
+
+
+static struct phy_driver mvswitch_driver = {
+	.name		= "Marvell 88E6060",
+	.phy_id		= MVSWITCH_MAGIC,
+	.phy_id_mask	= 0xffffffff,
+	.features	= PHY_BASIC_FEATURES,
+	.probe		= &mvswitch_probe,
+	.remove		= &mvswitch_remove,
+	.config_init	= &mvswitch_config_init,
+	.config_aneg	= &mvswitch_config_aneg,
+	.read_status	= &mvswitch_read_status,
+	.driver		= { .owner = THIS_MODULE,},
+};
+
+static int __init
+mvswitch_init(void)
+{
+	phy_register_fixup_for_id(PHY_ANY_ID, mvswitch_fixup);
+	return phy_driver_register(&mvswitch_driver);
+}
+
+static void __exit
+mvswitch_exit(void)
+{
+	phy_driver_unregister(&mvswitch_driver);
+}
+
+module_init(mvswitch_init);
+module_exit(mvswitch_exit);
diff --git a/target/linux/generic/files/drivers/net/phy/mvswitch.h b/target/linux/generic/files/drivers/net/phy/mvswitch.h
new file mode 100644
index 0000000000..1563eec4d5
--- /dev/null
+++ b/target/linux/generic/files/drivers/net/phy/mvswitch.h
@@ -0,0 +1,145 @@
+/*
+ * Marvell 88E6060 switch driver
+ * Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of the GNU General Public License v2 as published by the
+ * Free Software Foundation
+ */
+#ifndef __MVSWITCH_H
+#define __MVSWITCH_H
+
+#define MV_HEADER_SIZE	2
+#define MV_HEADER_PORTS_M	0x001f
+#define MV_HEADER_PORTS_S	0
+#define MV_HEADER_VLAN_M	0xf000
+#define MV_HEADER_VLAN_S	12
+
+#define MV_TRAILER_SIZE	4
+#define MV_TRAILER_PORTS_M	0x1f
+#define MV_TRAILER_PORTS_S	16
+#define MV_TRAILER_FLAGS_S	24
+#define MV_TRAILER_OVERRIDE	0x80
+
+
+#define MV_PORTS	5
+#define MV_WANPORT	4
+#define MV_CPUPORT	5
+
+#define MV_BASE		0x10
+
+#define MV_PHYPORT_BASE		(MV_BASE + 0x0)
+#define MV_PHYPORT(_n)		(MV_PHYPORT_BASE + (_n))
+#define MV_SWITCHPORT_BASE	(MV_BASE + 0x8)
+#define MV_SWITCHPORT(_n)	(MV_SWITCHPORT_BASE + (_n))
+#define MV_SWITCHREGS		(MV_BASE + 0xf)
+
+enum {
+	MV_PHY_CONTROL      = 0x00,
+	MV_PHY_STATUS       = 0x01,
+	MV_PHY_IDENT0       = 0x02,
+	MV_PHY_IDENT1       = 0x03,
+	MV_PHY_ANEG         = 0x04,
+	MV_PHY_LINK_ABILITY = 0x05,
+	MV_PHY_ANEG_EXPAND  = 0x06,
+	MV_PHY_XMIT_NEXTP   = 0x07,
+	MV_PHY_LINK_NEXTP   = 0x08,
+	MV_PHY_CONTROL1     = 0x10,
+	MV_PHY_STATUS1      = 0x11,
+	MV_PHY_INTR_EN      = 0x12,
+	MV_PHY_INTR_STATUS  = 0x13,
+	MV_PHY_INTR_PORT    = 0x14,
+	MV_PHY_RECV_COUNTER = 0x16,
+	MV_PHY_LED_PARALLEL = 0x16,
+	MV_PHY_LED_STREAM   = 0x17,
+	MV_PHY_LED_CTRL     = 0x18,
+	MV_PHY_LED_OVERRIDE = 0x19,
+	MV_PHY_VCT_CTRL     = 0x1a,
+	MV_PHY_VCT_STATUS   = 0x1b,
+	MV_PHY_CONTROL2     = 0x1e
+};
+#define MV_PHYREG(_type, _port) MV_PHYPORT(_port), MV_PHY_##_type
+
+enum {
+	MV_PORT_STATUS      = 0x00,
+	MV_PORT_IDENT       = 0x03,
+	MV_PORT_CONTROL     = 0x04,
+	MV_PORT_VLANMAP     = 0x06,
+	MV_PORT_ASSOC       = 0x0b,
+	MV_PORT_RXCOUNT     = 0x10,
+	MV_PORT_TXCOUNT     = 0x11,
+};
+#define MV_PORTREG(_type, _port) MV_SWITCHPORT(_port), MV_PORT_##_type
+
+enum {
+	MV_PORTCTRL_BLOCK   =  (1 << 0),
+	MV_PORTCTRL_LEARN   =  (2 << 0),
+	MV_PORTCTRL_ENABLED =  (3 << 0),
+	MV_PORTCTRL_VLANTUN =  (1 << 7),	/* Enforce VLANs on packets */
+	MV_PORTCTRL_RXTR    =  (1 << 8),	/* Enable Marvell packet trailer for ingress */
+	MV_PORTCTRL_HEADER	= (1 << 11),	/* Enable Marvell packet header mode for port */
+	MV_PORTCTRL_TXTR    = (1 << 14),	/* Enable Marvell packet trailer for egress */
+	MV_PORTCTRL_FORCEFL = (1 << 15),	/* force flow control */
+};
+
+#define MV_PORTVLAN_ID(_n) (((_n) & 0xf) << 12)
+#define MV_PORTVLAN_PORTS(_n) ((_n) & 0x3f)
+
+#define MV_PORTASSOC_PORTS(_n) ((_n) & 0x1f)
+#define MV_PORTASSOC_MONITOR	(1 << 15)
+
+enum {
+	MV_SWITCH_MAC0      = 0x01,
+	MV_SWITCH_MAC1      = 0x02,
+	MV_SWITCH_MAC2      = 0x03,
+	MV_SWITCH_CTRL      = 0x04,
+	MV_SWITCH_ATU_CTRL  = 0x0a,
+	MV_SWITCH_ATU_OP    = 0x0b,
+	MV_SWITCH_ATU_DATA  = 0x0c,
+	MV_SWITCH_ATU_MAC0  = 0x0d,
+	MV_SWITCH_ATU_MAC1  = 0x0e,
+	MV_SWITCH_ATU_MAC2  = 0x0f,
+};
+#define MV_SWITCHREG(_type) MV_SWITCHREGS, MV_SWITCH_##_type
+
+enum {
+	MV_SWITCHCTL_EEIE   =  (1 << 0),	/* EEPROM interrupt enable */
+	MV_SWITCHCTL_PHYIE  =  (1 << 1),	/* PHY interrupt enable */
+	MV_SWITCHCTL_ATUDONE=  (1 << 2),	/* ATU done interrupt enable */
+	MV_SWITCHCTL_ATUIE  =  (1 << 3),	/* ATU interrupt enable */
+	MV_SWITCHCTL_CTRMODE=  (1 << 8),	/* statistics for rx and tx errors */
+	MV_SWITCHCTL_RELOAD =  (1 << 9),	/* reload registers from eeprom */
+	MV_SWITCHCTL_MSIZE  = (1 << 10),	/* increase maximum frame size */
+	MV_SWITCHCTL_DROP   = (1 << 13),	/* discard frames with excessive collisions */
+};
+
+enum {
+#define MV_ATUCTL_AGETIME_MIN	16
+#define MV_ATUCTL_AGETIME_MAX	4080
+#define MV_ATUCTL_AGETIME(_n)	((((_n) / 16) & 0xff) << 4)
+	MV_ATUCTL_ATU_256   = (0 << 12),
+	MV_ATUCTL_ATU_512   = (1 << 12),
+	MV_ATUCTL_ATU_1K	= (2 << 12),
+	MV_ATUCTL_ATUMASK   = (3 << 12),
+	MV_ATUCTL_NO_LEARN  = (1 << 14),
+	MV_ATUCTL_RESET     = (1 << 15),
+};
+
+enum {
+#define MV_ATUOP_DBNUM(_n)	((_n) & 0x0f)
+
+	MV_ATUOP_NOOP       = (0 << 12),
+	MV_ATUOP_FLUSH_ALL  = (1 << 12),
+	MV_ATUOP_FLUSH_U    = (2 << 12),
+	MV_ATUOP_LOAD_DB    = (3 << 12),
+	MV_ATUOP_GET_NEXT   = (4 << 12),
+	MV_ATUOP_FLUSH_DB   = (5 << 12),
+	MV_ATUOP_FLUSH_DB_UU= (6 << 12),
+
+	MV_ATUOP_INPROGRESS = (1 << 15),
+};
+
+#define MV_IDENT_MASK		0xfff0
+#define MV_IDENT_VALUE		0x0600
+
+#endif
diff --git a/target/linux/generic/files/drivers/net/phy/rtl8306.c b/target/linux/generic/files/drivers/net/phy/rtl8306.c
new file mode 100644
index 0000000000..901b5b2f83
--- /dev/null
+++ b/target/linux/generic/files/drivers/net/phy/rtl8306.c
@@ -0,0 +1,1058 @@
+/*
+ * rtl8306.c: RTL8306S switch driver
+ *
+ * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/if.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/if_ether.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/netlink.h>
+#include <net/genetlink.h>
+#include <linux/switch.h>
+#include <linux/delay.h>
+#include <linux/phy.h>
+
+//#define DEBUG 1
+
+/* Global (PHY0) */
+#define RTL8306_REG_PAGE		16
+#define RTL8306_REG_PAGE_LO		(1 << 15)
+#define RTL8306_REG_PAGE_HI		(1 << 1) /* inverted */
+
+#define RTL8306_NUM_VLANS		16
+#define RTL8306_NUM_PORTS		6
+#define RTL8306_PORT_CPU		5
+#define RTL8306_NUM_PAGES		4
+#define RTL8306_NUM_REGS		32
+
+#define RTL_NAME_S          "RTL8306S"
+#define RTL_NAME_SD         "RTL8306SD"
+#define RTL_NAME_SDM        "RTL8306SDM"
+#define RTL_NAME_UNKNOWN    "RTL8306(unknown)"
+
+#define RTL8306_MAGIC	0x8306
+
+static LIST_HEAD(phydevs);
+
+struct rtl_priv {
+	struct list_head list;
+	struct switch_dev dev;
+	int page;
+	int type;
+	int do_cpu;
+	struct mii_bus *bus;
+	char hwname[sizeof(RTL_NAME_UNKNOWN)];
+};
+
+struct rtl_phyregs {
+	int nway;
+	int speed;
+	int duplex;
+};
+
+#define to_rtl(_dev) container_of(_dev, struct rtl_priv, dev)
+
+enum {
+	RTL_TYPE_S,
+	RTL_TYPE_SD,
+	RTL_TYPE_SDM,
+};
+
+struct rtl_reg {
+	int page;
+	int phy;
+	int reg;
+	int bits;
+	int shift;
+	int inverted;
+};
+
+#define RTL_VLAN_REGOFS(name) \
+	(RTL_REG_VLAN1_##name - RTL_REG_VLAN0_##name)
+
+#define RTL_PORT_REGOFS(name) \
+	(RTL_REG_PORT1_##name - RTL_REG_PORT0_##name)
+
+#define RTL_PORT_REG(id, reg) \
+	(RTL_REG_PORT0_##reg + (id * RTL_PORT_REGOFS(reg)))
+
+#define RTL_VLAN_REG(id, reg) \
+	(RTL_REG_VLAN0_##reg + (id * RTL_VLAN_REGOFS(reg)))
+
+#define RTL_GLOBAL_REGATTR(reg) \
+	.id = RTL_REG_##reg, \
+	.type = SWITCH_TYPE_INT, \
+	.ofs = 0, \
+	.set = rtl_attr_set_int, \
+	.get = rtl_attr_get_int
+
+#define RTL_PORT_REGATTR(reg) \
+	.id = RTL_REG_PORT0_##reg, \
+	.type = SWITCH_TYPE_INT, \
+	.ofs = RTL_PORT_REGOFS(reg), \
+	.set = rtl_attr_set_port_int, \
+	.get = rtl_attr_get_port_int
+
+#define RTL_VLAN_REGATTR(reg) \
+	.id = RTL_REG_VLAN0_##reg, \
+	.type = SWITCH_TYPE_INT, \
+	.ofs = RTL_VLAN_REGOFS(reg), \
+	.set = rtl_attr_set_vlan_int, \
+	.get = rtl_attr_get_vlan_int
+
+enum rtl_regidx {
+	RTL_REG_CHIPID,
+	RTL_REG_CHIPVER,
+	RTL_REG_CHIPTYPE,
+	RTL_REG_CPUPORT,
+
+	RTL_REG_EN_CPUPORT,
+	RTL_REG_EN_TAG_OUT,
+	RTL_REG_EN_TAG_CLR,
+	RTL_REG_EN_TAG_IN,
+	RTL_REG_TRAP_CPU,
+	RTL_REG_TRUNK_PORTSEL,
+	RTL_REG_EN_TRUNK,
+	RTL_REG_RESET,
+
+	RTL_REG_VLAN_ENABLE,
+	RTL_REG_VLAN_FILTER,
+	RTL_REG_VLAN_TAG_ONLY,
+	RTL_REG_VLAN_TAG_AWARE,
+#define RTL_VLAN_ENUM(id) \
+	RTL_REG_VLAN##id##_VID, \
+	RTL_REG_VLAN##id##_PORTMASK
+	RTL_VLAN_ENUM(0),
+	RTL_VLAN_ENUM(1),
+	RTL_VLAN_ENUM(2),
+	RTL_VLAN_ENUM(3),
+	RTL_VLAN_ENUM(4),
+	RTL_VLAN_ENUM(5),
+	RTL_VLAN_ENUM(6),
+	RTL_VLAN_ENUM(7),
+	RTL_VLAN_ENUM(8),
+	RTL_VLAN_ENUM(9),
+	RTL_VLAN_ENUM(10),
+	RTL_VLAN_ENUM(11),
+	RTL_VLAN_ENUM(12),
+	RTL_VLAN_ENUM(13),
+	RTL_VLAN_ENUM(14),
+	RTL_VLAN_ENUM(15),
+#define RTL_PORT_ENUM(id) \
+	RTL_REG_PORT##id##_PVID, \
+	RTL_REG_PORT##id##_NULL_VID_REPLACE, \
+	RTL_REG_PORT##id##_NON_PVID_DISCARD, \
+	RTL_REG_PORT##id##_VID_INSERT, \
+	RTL_REG_PORT##id##_TAG_INSERT, \
+	RTL_REG_PORT##id##_LINK, \
+	RTL_REG_PORT##id##_SPEED, \
+	RTL_REG_PORT##id##_NWAY, \
+	RTL_REG_PORT##id##_NRESTART, \
+	RTL_REG_PORT##id##_DUPLEX, \
+	RTL_REG_PORT##id##_RXEN, \
+	RTL_REG_PORT##id##_TXEN
+	RTL_PORT_ENUM(0),
+	RTL_PORT_ENUM(1),
+	RTL_PORT_ENUM(2),
+	RTL_PORT_ENUM(3),
+	RTL_PORT_ENUM(4),
+	RTL_PORT_ENUM(5),
+};
+
+static const struct rtl_reg rtl_regs[] = {
+	[RTL_REG_CHIPID]         = { 0, 4, 30, 16,  0, 0 },
+	[RTL_REG_CHIPVER]        = { 0, 4, 31,  8,  0, 0 },
+	[RTL_REG_CHIPTYPE]       = { 0, 4, 31,  2,  8, 0 },
+
+	/* CPU port number */
+	[RTL_REG_CPUPORT]        = { 2, 4, 21,  3,  0, 0 },
+	/* Enable CPU port function */
+	[RTL_REG_EN_CPUPORT]     = { 3, 2, 21,  1, 15, 1 },
+	/* Enable CPU port tag insertion */
+	[RTL_REG_EN_TAG_OUT]     = { 3, 2, 21,  1, 12, 0 },
+	/* Enable CPU port tag removal */
+	[RTL_REG_EN_TAG_CLR]     = { 3, 2, 21,  1, 11, 0 },
+	/* Enable CPU port tag checking */
+	[RTL_REG_EN_TAG_IN]      = { 0, 4, 21,  1,  7, 0 },
+	[RTL_REG_EN_TRUNK]       = { 0, 0, 19,  1, 11, 1 },
+	[RTL_REG_TRUNK_PORTSEL]  = { 0, 0, 16,  1,  6, 1 },
+	[RTL_REG_RESET]          = { 0, 0, 16,  1, 12, 0 },
+
+	[RTL_REG_TRAP_CPU]       = { 3, 2, 22,  1,  6, 0 },
+
+	[RTL_REG_VLAN_TAG_ONLY]  = { 0, 0, 16,  1,  8, 1 },
+	[RTL_REG_VLAN_FILTER]    = { 0, 0, 16,  1,  9, 1 },
+	[RTL_REG_VLAN_TAG_AWARE] = { 0, 0, 16,  1, 10, 1 },
+	[RTL_REG_VLAN_ENABLE]    = { 0, 0, 18,  1,  8, 1 },
+
+#define RTL_VLAN_REGS(id, phy, page, regofs) \
+	[RTL_REG_VLAN##id##_VID] = { page, phy, 25 + regofs, 12, 0, 0 }, \
+	[RTL_REG_VLAN##id##_PORTMASK] = { page, phy, 24 + regofs, 6, 0, 0 }
+	RTL_VLAN_REGS( 0, 0, 0, 0),
+	RTL_VLAN_REGS( 1, 1, 0, 0),
+	RTL_VLAN_REGS( 2, 2, 0, 0),
+	RTL_VLAN_REGS( 3, 3, 0, 0),
+	RTL_VLAN_REGS( 4, 4, 0, 0),
+	RTL_VLAN_REGS( 5, 0, 1, 2),
+	RTL_VLAN_REGS( 6, 1, 1, 2),
+	RTL_VLAN_REGS( 7, 2, 1, 2),
+	RTL_VLAN_REGS( 8, 3, 1, 2),
+	RTL_VLAN_REGS( 9, 4, 1, 2),
+	RTL_VLAN_REGS(10, 0, 1, 4),
+	RTL_VLAN_REGS(11, 1, 1, 4),
+	RTL_VLAN_REGS(12, 2, 1, 4),
+	RTL_VLAN_REGS(13, 3, 1, 4),
+	RTL_VLAN_REGS(14, 4, 1, 4),
+	RTL_VLAN_REGS(15, 0, 1, 6),
+
+#define REG_PORT_SETTING(port, phy) \
+	[RTL_REG_PORT##port##_SPEED] = { 0, phy, 0, 1, 13, 0 }, \
+	[RTL_REG_PORT##port##_NWAY] = { 0, phy, 0, 1, 12, 0 }, \
+	[RTL_REG_PORT##port##_NRESTART] = { 0, phy, 0, 1, 9, 0 }, \
+	[RTL_REG_PORT##port##_DUPLEX] = { 0, phy, 0, 1, 8, 0 }, \
+	[RTL_REG_PORT##port##_TXEN] = { 0, phy, 24, 1, 11, 0 }, \
+	[RTL_REG_PORT##port##_RXEN] = { 0, phy, 24, 1, 10, 0 }, \
+	[RTL_REG_PORT##port##_LINK] = { 0, phy, 1, 1, 2, 0 }, \
+	[RTL_REG_PORT##port##_NULL_VID_REPLACE] = { 0, phy, 22, 1, 12, 0 }, \
+	[RTL_REG_PORT##port##_NON_PVID_DISCARD] = { 0, phy, 22, 1, 11, 0 }, \
+	[RTL_REG_PORT##port##_VID_INSERT] = { 0, phy, 22, 2, 9, 0 }, \
+	[RTL_REG_PORT##port##_TAG_INSERT] = { 0, phy, 22, 2, 0, 0 }
+
+	REG_PORT_SETTING(0, 0),
+	REG_PORT_SETTING(1, 1),
+	REG_PORT_SETTING(2, 2),
+	REG_PORT_SETTING(3, 3),
+	REG_PORT_SETTING(4, 4),
+	REG_PORT_SETTING(5, 6),
+
+#define REG_PORT_PVID(phy, page, regofs) \
+	{ page, phy, 24 + regofs, 4, 12, 0 }
+	[RTL_REG_PORT0_PVID] = REG_PORT_PVID(0, 0, 0),
+	[RTL_REG_PORT1_PVID] = REG_PORT_PVID(1, 0, 0),
+	[RTL_REG_PORT2_PVID] = REG_PORT_PVID(2, 0, 0),
+	[RTL_REG_PORT3_PVID] = REG_PORT_PVID(3, 0, 0),
+	[RTL_REG_PORT4_PVID] = REG_PORT_PVID(4, 0, 0),
+	[RTL_REG_PORT5_PVID] = REG_PORT_PVID(0, 1, 2),
+};
+
+
+/* IFXMIPS compat stuff - remove after PHY layer migration */
+static struct switch_dev rtldev;
+/* END IFXMIPS compat stuff */
+
+
+static inline void
+rtl_set_page(struct rtl_priv *priv, unsigned int page)
+{
+	struct mii_bus *bus = priv->bus;
+	u16 pgsel;
+
+	if (priv->page == page)
+		return;
+
+	BUG_ON(page > RTL8306_NUM_PAGES);
+	pgsel = bus->read(bus, 0, RTL8306_REG_PAGE);
+	pgsel &= ~(RTL8306_REG_PAGE_LO | RTL8306_REG_PAGE_HI);
+	if (page & (1 << 0))
+		pgsel |= RTL8306_REG_PAGE_LO;
+	if (!(page & (1 << 1))) /* bit is inverted */
+		pgsel |= RTL8306_REG_PAGE_HI;
+	bus->write(bus, 0, RTL8306_REG_PAGE, pgsel);
+}
+
+static inline int
+rtl_w16(struct switch_dev *dev, unsigned int page, unsigned int phy, unsigned int reg, u16 val)
+{
+	struct rtl_priv *priv = to_rtl(dev);
+	struct mii_bus *bus = priv->bus;
+
+	rtl_set_page(priv, page);
+	bus->write(bus, phy, reg, val);
+	bus->read(bus, phy, reg); /* flush */
+	return 0;
+}
+
+static inline int
+rtl_r16(struct switch_dev *dev, unsigned int page, unsigned int phy, unsigned int reg)
+{
+	struct rtl_priv *priv = to_rtl(dev);
+	struct mii_bus *bus = priv->bus;
+
+	rtl_set_page(priv, page);
+	return bus->read(bus, phy, reg);
+}
+
+static inline u16
+rtl_rmw(struct switch_dev *dev, unsigned int page, unsigned int phy, unsigned int reg, u16 mask, u16 val)
+{
+	struct rtl_priv *priv = to_rtl(dev);
+	struct mii_bus *bus = priv->bus;
+	u16 r;
+
+	rtl_set_page(priv, page);
+	r = bus->read(bus, phy, reg);
+	r &= ~mask;
+	r |= val;
+	bus->write(bus, phy, reg, r);
+	return bus->read(bus, phy, reg); /* flush */
+}
+
+
+static inline int
+rtl_get(struct switch_dev *dev, enum rtl_regidx s)
+{
+	const struct rtl_reg *r = &rtl_regs[s];
+	u16 val;
+
+	BUG_ON(s >= ARRAY_SIZE(rtl_regs));
+	if (r->bits == 0) /* unimplemented */
+		return 0;
+
+	val = rtl_r16(dev, r->page, r->phy, r->reg);
+
+	if (r->shift > 0)
+		val >>= r->shift;
+
+	if (r->inverted)
+		val = ~val;
+
+	val &= (1 << r->bits) - 1;
+
+	return val;
+}
+
+static int
+rtl_set(struct switch_dev *dev, enum rtl_regidx s, unsigned int val)
+{
+	const struct rtl_reg *r = &rtl_regs[s];
+	u16 mask = 0xffff;
+
+	BUG_ON(s >= ARRAY_SIZE(rtl_regs));
+
+	if (r->bits == 0) /* unimplemented */
+		return 0;
+
+	if (r->shift > 0)
+		val <<= r->shift;
+
+	if (r->inverted)
+		val = ~val;
+
+	if (r->bits != 16) {
+		mask = (1 << r->bits) - 1;
+		mask <<= r->shift;
+	}
+	val &= mask;
+	return rtl_rmw(dev, r->page, r->phy, r->reg, mask, val);
+}
+
+static void
+rtl_phy_save(struct switch_dev *dev, int port, struct rtl_phyregs *regs)
+{
+	regs->nway = rtl_get(dev, RTL_PORT_REG(port, NWAY));
+	regs->speed = rtl_get(dev, RTL_PORT_REG(port, SPEED));
+	regs->duplex = rtl_get(dev, RTL_PORT_REG(port, DUPLEX));
+}
+
+static void
+rtl_phy_restore(struct switch_dev *dev, int port, struct rtl_phyregs *regs)
+{
+	rtl_set(dev, RTL_PORT_REG(port, NWAY), regs->nway);
+	rtl_set(dev, RTL_PORT_REG(port, SPEED), regs->speed);
+	rtl_set(dev, RTL_PORT_REG(port, DUPLEX), regs->duplex);
+}
+
+static void
+rtl_port_set_enable(struct switch_dev *dev, int port, int enabled)
+{
+	rtl_set(dev, RTL_PORT_REG(port, RXEN), enabled);
+	rtl_set(dev, RTL_PORT_REG(port, TXEN), enabled);
+
+	if ((port >= 5) || !enabled)
+		return;
+
+	/* restart autonegotiation if enabled */
+	rtl_set(dev, RTL_PORT_REG(port, NRESTART), 1);
+}
+
+static int
+rtl_hw_apply(struct switch_dev *dev)
+{
+	int i;
+	int trunk_en, trunk_psel;
+	struct rtl_phyregs port5;
+
+	rtl_phy_save(dev, 5, &port5);
+
+	/* disable rx/tx from PHYs */
+	for (i = 0; i < RTL8306_NUM_PORTS - 1; i++) {
+		rtl_port_set_enable(dev, i, 0);
+	}
+
+	/* save trunking status */
+	trunk_en = rtl_get(dev, RTL_REG_EN_TRUNK);
+	trunk_psel = rtl_get(dev, RTL_REG_TRUNK_PORTSEL);
+
+	/* trunk port 3 and 4
+	 * XXX: Big WTF, but RealTek seems to do it */
+	rtl_set(dev, RTL_REG_EN_TRUNK, 1);
+	rtl_set(dev, RTL_REG_TRUNK_PORTSEL, 1);
+
+	/* execute the software reset */
+	rtl_set(dev, RTL_REG_RESET, 1);
+
+	/* wait for the reset to complete,
+	 * but don't wait for too long */
+	for (i = 0; i < 10; i++) {
+		if (rtl_get(dev, RTL_REG_RESET) == 0)
+			break;
+
+		msleep(1);
+	}
+
+	/* enable rx/tx from PHYs */
+	for (i = 0; i < RTL8306_NUM_PORTS - 1; i++) {
+		rtl_port_set_enable(dev, i, 1);
+	}
+
+	/* restore trunking settings */
+	rtl_set(dev, RTL_REG_EN_TRUNK, trunk_en);
+	rtl_set(dev, RTL_REG_TRUNK_PORTSEL, trunk_psel);
+	rtl_phy_restore(dev, 5, &port5);
+
+	return 0;
+}
+
+static void
+rtl_hw_init(struct switch_dev *dev)
+{
+	struct rtl_priv *priv = to_rtl(dev);
+	int cpu_mask = 1 << dev->cpu_port;
+	int i;
+
+	rtl_set(dev, RTL_REG_VLAN_ENABLE, 0);
+	rtl_set(dev, RTL_REG_VLAN_FILTER, 0);
+	rtl_set(dev, RTL_REG_EN_TRUNK, 0);
+	rtl_set(dev, RTL_REG_TRUNK_PORTSEL, 0);
+
+	/* initialize cpu port settings */
+	if (priv->do_cpu) {
+		rtl_set(dev, RTL_REG_CPUPORT, dev->cpu_port);
+		rtl_set(dev, RTL_REG_EN_CPUPORT, 1);
+	} else {
+		rtl_set(dev, RTL_REG_CPUPORT, 7);
+		rtl_set(dev, RTL_REG_EN_CPUPORT, 0);
+	}
+	rtl_set(dev, RTL_REG_EN_TAG_OUT, 0);
+	rtl_set(dev, RTL_REG_EN_TAG_IN, 0);
+	rtl_set(dev, RTL_REG_EN_TAG_CLR, 0);
+
+	/* reset all vlans */
+	for (i = 0; i < RTL8306_NUM_VLANS; i++) {
+		rtl_set(dev, RTL_VLAN_REG(i, VID), i);
+		rtl_set(dev, RTL_VLAN_REG(i, PORTMASK), 0);
+	}
+
+	/* default to port isolation */
+	for (i = 0; i < RTL8306_NUM_PORTS; i++) {
+		unsigned long mask;
+
+		if ((1 << i) == cpu_mask)
+			mask = ((1 << RTL8306_NUM_PORTS) - 1) & ~cpu_mask; /* all bits set */
+		else
+			mask = cpu_mask | (1 << i);
+
+		rtl_set(dev, RTL_VLAN_REG(i, PORTMASK), mask);
+		rtl_set(dev, RTL_PORT_REG(i, PVID), i);
+		rtl_set(dev, RTL_PORT_REG(i, NULL_VID_REPLACE), 1);
+		rtl_set(dev, RTL_PORT_REG(i, VID_INSERT), 1);
+		rtl_set(dev, RTL_PORT_REG(i, TAG_INSERT), 3);
+	}
+	rtl_hw_apply(dev);
+}
+
+#ifdef DEBUG
+static int
+rtl_set_use_cpuport(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	struct rtl_priv *priv = to_rtl(dev);
+	priv->do_cpu = val->value.i;
+	rtl_hw_init(dev);
+	return 0;
+}
+
+static int
+rtl_get_use_cpuport(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	struct rtl_priv *priv = to_rtl(dev);
+	val->value.i = priv->do_cpu;
+	return 0;
+}
+
+static int
+rtl_set_cpuport(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	dev->cpu_port = val->value.i;
+	rtl_hw_init(dev);
+	return 0;
+}
+
+static int
+rtl_get_cpuport(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	val->value.i = dev->cpu_port;
+	return 0;
+}
+#endif
+
+static int
+rtl_reset(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	rtl_hw_init(dev);
+	return 0;
+}
+
+static int
+rtl_attr_set_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	int idx = attr->id + (val->port_vlan * attr->ofs);
+	struct rtl_phyregs port;
+
+	if (attr->id >= ARRAY_SIZE(rtl_regs))
+		return -EINVAL;
+
+	if ((attr->max > 0) && (val->value.i > attr->max))
+		return -EINVAL;
+
+	/* access to phy register 22 on port 4/5
+	 * needs phy status save/restore */
+	if ((val->port_vlan > 3) &&
+		(rtl_regs[idx].reg == 22) &&
+		(rtl_regs[idx].page == 0)) {
+
+		rtl_phy_save(dev, val->port_vlan, &port);
+		rtl_set(dev, idx, val->value.i);
+		rtl_phy_restore(dev, val->port_vlan, &port);
+	} else {
+		rtl_set(dev, idx, val->value.i);
+	}
+
+	return 0;
+}
+
+static int
+rtl_attr_get_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	int idx = attr->id + (val->port_vlan * attr->ofs);
+
+	if (idx >= ARRAY_SIZE(rtl_regs))
+		return -EINVAL;
+
+	val->value.i = rtl_get(dev, idx);
+	return 0;
+}
+
+static int
+rtl_attr_set_port_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	if (val->port_vlan >= RTL8306_NUM_PORTS)
+		return -EINVAL;
+
+	return rtl_attr_set_int(dev, attr, val);
+}
+
+static int
+rtl_attr_get_port_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	if (val->port_vlan >= RTL8306_NUM_PORTS)
+		return -EINVAL;
+	return rtl_attr_get_int(dev, attr, val);
+}
+
+static int
+rtl_attr_set_vlan_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	if (val->port_vlan >= dev->vlans)
+		return -EINVAL;
+
+	return rtl_attr_set_int(dev, attr, val);
+}
+
+static int
+rtl_attr_get_vlan_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	if (val->port_vlan >= dev->vlans)
+		return -EINVAL;
+
+	return rtl_attr_get_int(dev, attr, val);
+}
+
+static int
+rtl_get_ports(struct switch_dev *dev, struct switch_val *val)
+{
+	unsigned int i, mask;
+
+	mask = rtl_get(dev, RTL_VLAN_REG(val->port_vlan, PORTMASK));
+	for (i = 0; i < RTL8306_NUM_PORTS; i++) {
+		struct switch_port *port;
+
+		if (!(mask & (1 << i)))
+			continue;
+
+		port = &val->value.ports[val->len];
+		port->id = i;
+		port->flags = 0;
+		val->len++;
+	}
+
+	return 0;
+}
+
+static int
+rtl_set_vlan(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	struct rtl_priv *priv = to_rtl(dev);
+	struct rtl_phyregs port;
+	int en = val->value.i;
+	int i;
+
+	rtl_set(dev, RTL_REG_EN_TAG_OUT, en && priv->do_cpu);
+	rtl_set(dev, RTL_REG_EN_TAG_IN, en && priv->do_cpu);
+	rtl_set(dev, RTL_REG_EN_TAG_CLR, en && priv->do_cpu);
+	rtl_set(dev, RTL_REG_VLAN_TAG_AWARE, en);
+	if (en)
+		rtl_set(dev, RTL_REG_VLAN_FILTER, en);
+
+	for (i = 0; i < RTL8306_NUM_PORTS; i++) {
+		if (i > 3)
+			rtl_phy_save(dev, val->port_vlan, &port);
+		rtl_set(dev, RTL_PORT_REG(i, NULL_VID_REPLACE), 1);
+		rtl_set(dev, RTL_PORT_REG(i, VID_INSERT), (en ? (i == dev->cpu_port ? 0 : 1) : 1));
+		rtl_set(dev, RTL_PORT_REG(i, TAG_INSERT), (en ? (i == dev->cpu_port ? 2 : 1) : 3));
+		if (i > 3)
+			rtl_phy_restore(dev, val->port_vlan, &port);
+	}
+	rtl_set(dev, RTL_REG_VLAN_ENABLE, en);
+
+	return 0;
+}
+
+static int
+rtl_get_vlan(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	return rtl_get(dev, RTL_REG_VLAN_ENABLE);
+}
+
+static int
+rtl_set_ports(struct switch_dev *dev, struct switch_val *val)
+{
+	unsigned int mask = 0;
+	unsigned int oldmask;
+	int i;
+
+	for(i = 0; i < val->len; i++)
+	{
+		struct switch_port *port = &val->value.ports[i];
+		bool tagged = false;
+
+		mask |= (1 << port->id);
+
+		if (port->id == dev->cpu_port)
+			continue;
+
+		if ((i == dev->cpu_port) ||
+			(port->flags & (1 << SWITCH_PORT_FLAG_TAGGED)))
+			tagged = true;
+
+		/* fix up PVIDs for added ports */
+		if (!tagged)
+			rtl_set(dev, RTL_PORT_REG(port->id, PVID), val->port_vlan);
+
+		rtl_set(dev, RTL_PORT_REG(port->id, NON_PVID_DISCARD), (tagged ? 0 : 1));
+		rtl_set(dev, RTL_PORT_REG(port->id, VID_INSERT), (tagged ? 0 : 1));
+		rtl_set(dev, RTL_PORT_REG(port->id, TAG_INSERT), (tagged ? 2 : 1));
+	}
+
+	oldmask = rtl_get(dev, RTL_VLAN_REG(val->port_vlan, PORTMASK));
+	rtl_set(dev, RTL_VLAN_REG(val->port_vlan, PORTMASK), mask);
+
+	/* fix up PVIDs for removed ports, default to last vlan */
+	oldmask &= ~mask;
+	for (i = 0; i < RTL8306_NUM_PORTS; i++) {
+		if (!(oldmask & (1 << i)))
+			continue;
+
+		if (i == dev->cpu_port)
+			continue;
+
+		if (rtl_get(dev, RTL_PORT_REG(i, PVID)) == val->port_vlan)
+			rtl_set(dev, RTL_PORT_REG(i, PVID), dev->vlans - 1);
+	}
+
+	return 0;
+}
+
+static int
+rtl8306_config_init(struct phy_device *pdev)
+{
+	struct net_device *netdev = pdev->attached_dev;
+	struct rtl_priv *priv = pdev->priv;
+	struct switch_dev *dev = &priv->dev;
+	struct switch_val val;
+	unsigned int chipid, chipver, chiptype;
+	int err;
+
+	/* Only init the switch for the primary PHY */
+	if (pdev->addr != 0)
+		return 0;
+
+	val.value.i = 1;
+	memcpy(&priv->dev, &rtldev, sizeof(struct switch_dev));
+	priv->do_cpu = 0;
+	priv->page = -1;
+	priv->bus = pdev->bus;
+
+	dev->priv = priv;
+
+	chipid = rtl_get(dev, RTL_REG_CHIPID);
+	chipver = rtl_get(dev, RTL_REG_CHIPVER);
+	chiptype = rtl_get(dev, RTL_REG_CHIPTYPE);
+	switch(chiptype) {
+	case 0:
+	case 2:
+		strncpy(priv->hwname, RTL_NAME_S, sizeof(priv->hwname));
+		priv->type = RTL_TYPE_S;
+		break;
+	case 1:
+		strncpy(priv->hwname, RTL_NAME_SD, sizeof(priv->hwname));
+		priv->type = RTL_TYPE_SD;
+		break;
+	case 3:
+		strncpy(priv->hwname, RTL_NAME_SDM, sizeof(priv->hwname));
+		priv->type = RTL_TYPE_SDM;
+		break;
+	default:
+		strncpy(priv->hwname, RTL_NAME_UNKNOWN, sizeof(priv->hwname));
+		break;
+	}
+
+	dev->name = priv->hwname;
+	rtl_hw_init(dev);
+
+	printk(KERN_INFO "Registering %s switch with Chip ID: 0x%04x, version: 0x%04x\n", priv->hwname, chipid, chipver);
+
+	err = register_switch(dev, netdev);
+	if (err < 0) {
+		kfree(priv);
+		return err;
+	}
+
+	return 0;
+}
+
+static struct switch_attr rtl_globals[] = {
+	{
+		.type = SWITCH_TYPE_INT,
+		.name = "reset",
+		.description = "Reset the switch",
+		.set = rtl_reset,
+	},
+	{
+		.type = SWITCH_TYPE_INT,
+		.name = "enable_vlan",
+		.description = "Enable VLAN mode",
+		.max = 1,
+		.set = rtl_set_vlan,
+		.get = rtl_get_vlan,
+	},
+	{
+		RTL_GLOBAL_REGATTR(EN_TRUNK),
+		.name = "trunk",
+		.description = "Enable port trunking",
+		.max = 1,
+	},
+	{
+		RTL_GLOBAL_REGATTR(TRUNK_PORTSEL),
+		.name = "trunk_sel",
+		.description = "Select ports for trunking (0: 0,1 - 1: 3,4)",
+		.max = 1,
+	},
+#ifdef DEBUG
+	{
+		RTL_GLOBAL_REGATTR(VLAN_FILTER),
+		.name = "vlan_filter",
+		.description = "Filter incoming packets for allowed VLANS",
+		.max = 1,
+	},
+	{
+		.type = SWITCH_TYPE_INT,
+		.name = "cpuport",
+		.description = "CPU Port",
+		.set = rtl_set_cpuport,
+		.get = rtl_get_cpuport,
+		.max = RTL8306_NUM_PORTS,
+	},
+	{
+		.type = SWITCH_TYPE_INT,
+		.name = "use_cpuport",
+		.description = "CPU Port handling flag",
+		.set = rtl_set_use_cpuport,
+		.get = rtl_get_use_cpuport,
+		.max = RTL8306_NUM_PORTS,
+	},
+	{
+		RTL_GLOBAL_REGATTR(TRAP_CPU),
+		.name = "trap_cpu",
+		.description = "VLAN trap to CPU",
+		.max = 1,
+	},
+	{
+		RTL_GLOBAL_REGATTR(VLAN_TAG_AWARE),
+		.name = "vlan_tag_aware",
+		.description = "Enable VLAN tag awareness",
+		.max = 1,
+	},
+	{
+		RTL_GLOBAL_REGATTR(VLAN_TAG_ONLY),
+		.name = "tag_only",
+		.description = "Only accept tagged packets",
+		.max = 1,
+	},
+#endif
+};
+static struct switch_attr rtl_port[] = {
+	{
+		RTL_PORT_REGATTR(PVID),
+		.name = "pvid",
+		.description = "Port VLAN ID",
+		.max = RTL8306_NUM_VLANS - 1,
+	},
+	{
+		RTL_PORT_REGATTR(LINK),
+		.name = "link",
+		.description = "get the current link state",
+		.max = 1,
+		.set = NULL,
+	},
+#ifdef DEBUG
+	{
+		RTL_PORT_REGATTR(NULL_VID_REPLACE),
+		.name = "null_vid",
+		.description = "NULL VID gets replaced by port default vid",
+		.max = 1,
+	},
+	{
+		RTL_PORT_REGATTR(NON_PVID_DISCARD),
+		.name = "non_pvid_discard",
+		.description = "discard packets with VID != PVID",
+		.max = 1,
+	},
+	{
+		RTL_PORT_REGATTR(VID_INSERT),
+		.name = "vid_insert_remove",
+		.description = "how should the switch insert and remove vids ?",
+		.max = 3,
+	},
+	{
+		RTL_PORT_REGATTR(TAG_INSERT),
+		.name = "tag_insert",
+		.description = "tag insertion handling",
+		.max = 3,
+	},
+#endif
+	{
+		RTL_PORT_REGATTR(SPEED),
+		.name = "speed",
+		.description = "current link speed",
+		.max = 1,
+	},
+	{
+		RTL_PORT_REGATTR(NWAY),
+		.name = "nway",
+		.description = "enable autonegotiation",
+		.max = 1,
+	},
+};
+
+static struct switch_attr rtl_vlan[] = {
+	{
+		RTL_VLAN_REGATTR(VID),
+		.name = "vid",
+		.description = "VLAN ID",
+		.max = 4095,
+	},
+};
+
+/* template */
+static struct switch_dev rtldev = {
+	.cpu_port = RTL8306_PORT_CPU,
+	.ports = RTL8306_NUM_PORTS,
+	.vlans = RTL8306_NUM_VLANS,
+	.attr_global = {
+		.attr = rtl_globals,
+		.n_attr = ARRAY_SIZE(rtl_globals),
+	},
+	.attr_port = {
+		.attr = rtl_port,
+		.n_attr = ARRAY_SIZE(rtl_port),
+	},
+	.attr_vlan = {
+		.attr = rtl_vlan,
+		.n_attr = ARRAY_SIZE(rtl_vlan),
+	},
+
+	.get_vlan_ports = rtl_get_ports,
+	.set_vlan_ports = rtl_set_ports,
+	.apply_config = rtl_hw_apply,
+};
+
+
+static int
+rtl8306_fixup(struct phy_device *pdev)
+{
+	struct rtl_priv priv;
+	u16 chipid;
+
+	/* Attach to primary LAN port and WAN port */
+	if (pdev->addr != 0 && pdev->addr != 4)
+		return 0;
+
+	priv.page = -1;
+	priv.bus = pdev->bus;
+	chipid = rtl_get(&priv.dev, RTL_REG_CHIPID);
+	if (chipid == 0x5988)
+		pdev->phy_id = RTL8306_MAGIC;
+
+	return 0;
+}
+
+static int
+rtl8306_probe(struct phy_device *pdev)
+{
+	struct rtl_priv *priv;
+
+	list_for_each_entry(priv, &phydevs, list) {
+		/*
+		 * share one rtl_priv instance between virtual phy
+		 * devices on the same bus
+		 */
+		if (priv->bus == pdev->bus)
+			goto found;
+	}
+	priv = kzalloc(sizeof(struct rtl_priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->bus = pdev->bus;
+
+found:
+	pdev->priv = priv;
+	return 0;
+}
+
+static void
+rtl8306_remove(struct phy_device *pdev)
+{
+	struct rtl_priv *priv = pdev->priv;
+	unregister_switch(&priv->dev);
+	kfree(priv);
+}
+
+static int
+rtl8306_config_aneg(struct phy_device *pdev)
+{
+	struct rtl_priv *priv = pdev->priv;
+
+	/* Only for WAN */
+	if (pdev->addr == 0)
+		return 0;
+
+	/* Restart autonegotiation */
+	rtl_set(&priv->dev, RTL_PORT_REG(4, NWAY), 1);
+	rtl_set(&priv->dev, RTL_PORT_REG(4, NRESTART), 1);
+
+	return 0;
+}
+
+static int
+rtl8306_read_status(struct phy_device *pdev)
+{
+	struct rtl_priv *priv = pdev->priv;
+	struct switch_dev *dev = &priv->dev;
+
+	if (pdev->addr == 4) {
+		/* WAN */
+		pdev->speed = rtl_get(dev, RTL_PORT_REG(4, SPEED)) ? SPEED_100 : SPEED_10;
+		pdev->duplex = rtl_get(dev, RTL_PORT_REG(4, DUPLEX)) ? DUPLEX_FULL : DUPLEX_HALF;
+		pdev->link = !!rtl_get(dev, RTL_PORT_REG(4, LINK));
+	} else {
+		/* LAN */
+		pdev->speed = SPEED_100;
+		pdev->duplex = DUPLEX_FULL;
+		pdev->link = 1;
+	}
+
+	/*
+	 * Bypass generic PHY status read,
+	 * it doesn't work with this switch
+	 */
+	if (pdev->link) {
+		pdev->state = PHY_RUNNING;
+		netif_carrier_on(pdev->attached_dev);
+		pdev->adjust_link(pdev->attached_dev);
+	} else {
+		pdev->state = PHY_NOLINK;
+		netif_carrier_off(pdev->attached_dev);
+		pdev->adjust_link(pdev->attached_dev);
+	}
+
+	return 0;
+}
+
+
+static struct phy_driver rtl8306_driver = {
+	.name		= "Realtek RTL8306S",
+	.flags		= PHY_HAS_MAGICANEG,
+	.phy_id		= RTL8306_MAGIC,
+	.phy_id_mask	= 0xffffffff,
+	.features	= PHY_BASIC_FEATURES,
+	.probe		= &rtl8306_probe,
+	.remove		= &rtl8306_remove,
+	.config_init	= &rtl8306_config_init,
+	.config_aneg	= &rtl8306_config_aneg,
+	.read_status	= &rtl8306_read_status,
+	.driver		= { .owner = THIS_MODULE,},
+};
+
+
+static int __init
+rtl_init(void)
+{
+	phy_register_fixup_for_id(PHY_ANY_ID, rtl8306_fixup);
+	return phy_driver_register(&rtl8306_driver);
+}
+
+static void __exit
+rtl_exit(void)
+{
+	phy_driver_unregister(&rtl8306_driver);
+}
+
+module_init(rtl_init);
+module_exit(rtl_exit);
+MODULE_LICENSE("GPL");
+
diff --git a/target/linux/generic/files/drivers/net/phy/rtl8366_smi.c b/target/linux/generic/files/drivers/net/phy/rtl8366_smi.c
new file mode 100644
index 0000000000..bb2e3ba68f
--- /dev/null
+++ b/target/linux/generic/files/drivers/net/phy/rtl8366_smi.c
@@ -0,0 +1,385 @@
+/*
+ * Realtek RTL8366 SMI interface driver
+ *
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/spinlock.h>
+#include <linux/skbuff.h>
+
+#include "rtl8366_smi.h"
+
+#define RTL8366_SMI_ACK_RETRY_COUNT         5
+#define RTL8366_SMI_CLK_DELAY               10 /* nsec */
+
+static inline void rtl8366_smi_clk_delay(struct rtl8366_smi *smi)
+{
+	ndelay(RTL8366_SMI_CLK_DELAY);
+}
+
+static void rtl8366_smi_start(struct rtl8366_smi *smi)
+{
+	unsigned int sda = smi->gpio_sda;
+	unsigned int sck = smi->gpio_sck;
+
+	/*
+	 * Set GPIO pins to output mode, with initial state:
+	 * SCK = 0, SDA = 1
+	 */
+	gpio_direction_output(sck, 0);
+	gpio_direction_output(sda, 1);
+	rtl8366_smi_clk_delay(smi);
+
+	/* CLK 1: 0 -> 1, 1 -> 0 */
+	gpio_set_value(sck, 1);
+	rtl8366_smi_clk_delay(smi);
+	gpio_set_value(sck, 0);
+	rtl8366_smi_clk_delay(smi);
+
+	/* CLK 2: */
+	gpio_set_value(sck, 1);
+	rtl8366_smi_clk_delay(smi);
+	gpio_set_value(sda, 0);
+	rtl8366_smi_clk_delay(smi);
+	gpio_set_value(sck, 0);
+	rtl8366_smi_clk_delay(smi);
+	gpio_set_value(sda, 1);
+}
+
+static void rtl8366_smi_stop(struct rtl8366_smi *smi)
+{
+	unsigned int sda = smi->gpio_sda;
+	unsigned int sck = smi->gpio_sck;
+
+	rtl8366_smi_clk_delay(smi);
+	gpio_set_value(sda, 0);
+	gpio_set_value(sck, 1);
+	rtl8366_smi_clk_delay(smi);
+	gpio_set_value(sda, 1);
+	rtl8366_smi_clk_delay(smi);
+	gpio_set_value(sck, 1);
+	rtl8366_smi_clk_delay(smi);
+	gpio_set_value(sck, 0);
+	rtl8366_smi_clk_delay(smi);
+	gpio_set_value(sck, 1);
+
+	/* add a click */
+	rtl8366_smi_clk_delay(smi);
+	gpio_set_value(sck, 0);
+	rtl8366_smi_clk_delay(smi);
+	gpio_set_value(sck, 1);
+
+	/* set GPIO pins to input mode */
+	gpio_direction_input(sda);
+	gpio_direction_input(sck);
+}
+
+static void rtl8366_smi_write_bits(struct rtl8366_smi *smi, u32 data, u32 len)
+{
+	unsigned int sda = smi->gpio_sda;
+	unsigned int sck = smi->gpio_sck;
+
+	for (; len > 0; len--) {
+		rtl8366_smi_clk_delay(smi);
+
+		/* prepare data */
+		gpio_set_value(sda, !!(data & ( 1 << (len - 1))));
+		rtl8366_smi_clk_delay(smi);
+
+		/* clocking */
+		gpio_set_value(sck, 1);
+		rtl8366_smi_clk_delay(smi);
+		gpio_set_value(sck, 0);
+	}
+}
+
+static void rtl8366_smi_read_bits(struct rtl8366_smi *smi, u32 len, u32 *data)
+{
+	unsigned int sda = smi->gpio_sda;
+	unsigned int sck = smi->gpio_sck;
+
+	gpio_direction_input(sda);
+
+	for (*data = 0; len > 0; len--) {
+		u32 u;
+
+		rtl8366_smi_clk_delay(smi);
+
+		/* clocking */
+		gpio_set_value(sck, 1);
+		rtl8366_smi_clk_delay(smi);
+		u = !!gpio_get_value(sda);
+		gpio_set_value(sck, 0);
+
+		*data |= (u << (len - 1));
+	}
+
+	gpio_direction_output(sda, 0);
+}
+
+static int rtl8366_smi_wait_for_ack(struct rtl8366_smi *smi)
+{
+	int retry_cnt;
+
+	retry_cnt = 0;
+	do {
+		u32 ack;
+
+		rtl8366_smi_read_bits(smi, 1, &ack);
+		if (ack == 0)
+			break;
+
+		if (++retry_cnt > RTL8366_SMI_ACK_RETRY_COUNT)
+			return -EIO;
+	} while (1);
+
+	return 0;
+}
+
+static int rtl8366_smi_write_byte(struct rtl8366_smi *smi, u8 data)
+{
+	rtl8366_smi_write_bits(smi, data, 8);
+	return rtl8366_smi_wait_for_ack(smi);
+}
+
+static int rtl8366_smi_read_byte0(struct rtl8366_smi *smi, u8 *data)
+{
+	u32 t;
+
+	/* read data */
+	rtl8366_smi_read_bits(smi, 8, &t);
+	*data = (t & 0xff);
+
+	/* send an ACK */
+	rtl8366_smi_write_bits(smi, 0x00, 1);
+
+	return 0;
+}
+
+static int rtl8366_smi_read_byte1(struct rtl8366_smi *smi, u8 *data)
+{
+	u32 t;
+
+	/* read data */
+	rtl8366_smi_read_bits(smi, 8, &t);
+	*data = (t & 0xff);
+
+	/* send an ACK */
+	rtl8366_smi_write_bits(smi, 0x01, 1);
+
+	return 0;
+}
+
+int rtl8366_smi_read_reg(struct rtl8366_smi *smi, u32 addr, u32 *data)
+{
+	unsigned long flags;
+	u8 lo = 0;
+	u8 hi = 0;
+	int ret;
+
+	spin_lock_irqsave(&smi->lock, flags);
+
+	rtl8366_smi_start(smi);
+
+	/* send READ command */
+	ret = rtl8366_smi_write_byte(smi, 0x0a << 4 | 0x04 << 1 | 0x01);
+	if (ret)
+		goto out;
+
+	/* set ADDR[7:0] */
+	ret = rtl8366_smi_write_byte(smi, addr & 0xff);
+	if (ret)
+		goto out;
+
+	/* set ADDR[15:8] */
+	ret = rtl8366_smi_write_byte(smi, addr >> 8);
+	if (ret)
+		goto out;
+
+	/* read DATA[7:0] */
+	rtl8366_smi_read_byte0(smi, &lo);
+	/* read DATA[15:8] */
+	rtl8366_smi_read_byte1(smi, &hi);
+
+	*data = ((u32) lo) | (((u32) hi) << 8);
+
+	ret = 0;
+
+ out:
+	rtl8366_smi_stop(smi);
+	spin_unlock_irqrestore(&smi->lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(rtl8366_smi_read_reg);
+
+int rtl8366_smi_write_reg(struct rtl8366_smi *smi, u32 addr, u32 data)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&smi->lock, flags);
+
+	rtl8366_smi_start(smi);
+
+	/* send WRITE command */
+	ret = rtl8366_smi_write_byte(smi, 0x0a << 4 | 0x04 << 1 | 0x00);
+	if (ret)
+		goto out;
+
+	/* set ADDR[7:0] */
+	ret = rtl8366_smi_write_byte(smi, addr & 0xff);
+	if (ret)
+		goto out;
+
+	/* set ADDR[15:8] */
+	ret = rtl8366_smi_write_byte(smi, addr >> 8);
+	if (ret)
+		goto out;
+
+	/* write DATA[7:0] */
+	ret = rtl8366_smi_write_byte(smi, data & 0xff);
+	if (ret)
+		goto out;
+
+	/* write DATA[15:8] */
+	ret = rtl8366_smi_write_byte(smi, data >> 8);
+	if (ret)
+		goto out;
+
+	ret = 0;
+
+ out:
+	rtl8366_smi_stop(smi);
+	spin_unlock_irqrestore(&smi->lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(rtl8366_smi_write_reg);
+
+int rtl8366_smi_rmwr(struct rtl8366_smi *smi, u32 addr, u32 mask, u32 data)
+{
+	u32 t;
+	int err;
+
+	err = rtl8366_smi_read_reg(smi, addr, &t);
+	if (err)
+		return err;
+
+	err = rtl8366_smi_write_reg(smi, addr, (t & ~mask) | data);
+	return err;
+
+}
+EXPORT_SYMBOL_GPL(rtl8366_smi_rmwr);
+
+static int rtl8366_smi_mii_init(struct rtl8366_smi *smi)
+{
+	int ret;
+	int i;
+
+	smi->mii_bus = mdiobus_alloc();
+	if (smi->mii_bus == NULL) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	smi->mii_bus->priv = (void *) smi;
+	smi->mii_bus->name = dev_name(smi->parent);
+	smi->mii_bus->read = smi->ops->mii_read;
+	smi->mii_bus->write = smi->ops->mii_write;
+	snprintf(smi->mii_bus->id, MII_BUS_ID_SIZE, "%s",
+		 dev_name(smi->parent));
+	smi->mii_bus->parent = smi->parent;
+	smi->mii_bus->phy_mask = ~(0x1f);
+	smi->mii_bus->irq = smi->mii_irq;
+	for (i = 0; i < PHY_MAX_ADDR; i++)
+		smi->mii_irq[i] = PHY_POLL;
+
+	ret = mdiobus_register(smi->mii_bus);
+	if (ret)
+		goto err_free;
+
+	return 0;
+
+ err_free:
+	mdiobus_free(smi->mii_bus);
+ err:
+	return ret;
+}
+
+static void rtl8366_smi_mii_cleanup(struct rtl8366_smi *smi)
+{
+	mdiobus_unregister(smi->mii_bus);
+	mdiobus_free(smi->mii_bus);
+}
+
+int rtl8366_smi_init(struct rtl8366_smi *smi)
+{
+	int err;
+
+	if (!smi->parent)
+		return -EINVAL;
+
+	if (!smi->ops)
+		return -EINVAL;
+
+	err = gpio_request(smi->gpio_sda, dev_name(smi->parent));
+	if (err) {
+		dev_err(smi->parent, "gpio_request failed for %u, err=%d\n",
+			smi->gpio_sda, err);
+		goto err_out;
+	}
+
+	err = gpio_request(smi->gpio_sck, dev_name(smi->parent));
+	if (err) {
+		dev_err(smi->parent, "gpio_request failed for %u, err=%d\n",
+			smi->gpio_sck, err);
+		goto err_free_sda;
+	}
+
+	spin_lock_init(&smi->lock);
+
+	dev_info(smi->parent, "using GPIO pins %u (SDA) and %u (SCK)\n",
+		 smi->gpio_sda, smi->gpio_sck);
+
+	err = smi->ops->detect(smi);
+	if (err) {
+		dev_err(smi->parent, "chip detection failed, err=%d\n", err);
+		goto err_free_sck;
+	}
+
+	err = rtl8366_smi_mii_init(smi);
+	if (err)
+		goto err_free_sck;
+
+	return 0;
+
+ err_free_sck:
+	gpio_free(smi->gpio_sck);
+ err_free_sda:
+	gpio_free(smi->gpio_sda);
+ err_out:
+	return err;
+}
+EXPORT_SYMBOL_GPL(rtl8366_smi_init);
+
+void rtl8366_smi_cleanup(struct rtl8366_smi *smi)
+{
+	rtl8366_smi_mii_cleanup(smi);
+	gpio_free(smi->gpio_sck);
+	gpio_free(smi->gpio_sda);
+}
+EXPORT_SYMBOL_GPL(rtl8366_smi_cleanup);
+
+MODULE_DESCRIPTION("Realtek RTL8366 SMI interface driver");
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/generic/files/drivers/net/phy/rtl8366_smi.h b/target/linux/generic/files/drivers/net/phy/rtl8366_smi.h
new file mode 100644
index 0000000000..1afee9b73a
--- /dev/null
+++ b/target/linux/generic/files/drivers/net/phy/rtl8366_smi.h
@@ -0,0 +1,58 @@
+/*
+ * Realtek RTL8366 SMI interface driver defines
+ *
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _RTL8366_SMI_H
+#define _RTL8366_SMI_H
+
+#include <linux/phy.h>
+
+struct rtl8366_smi_ops;
+struct mii_bus;
+
+struct rtl8366_smi {
+	struct device		*parent;
+	unsigned int		gpio_sda;
+	unsigned int		gpio_sck;
+	spinlock_t		lock;
+	struct mii_bus		*mii_bus;
+	int			mii_irq[PHY_MAX_ADDR];
+
+	struct rtl8366_smi_ops	*ops;
+};
+
+struct rtl8366_smi_ops {
+	int	(*detect)(struct rtl8366_smi *smi);
+
+	int	(*mii_read)(struct mii_bus *bus, int addr, int reg);
+	int	(*mii_write)(struct mii_bus *bus, int addr, int reg, u16 val);
+};
+
+struct rtl8366_vlan_mc {
+	u16	vid;
+	u8	priority;
+	u8	untag;
+	u8	member;
+	u8	fid;
+};
+
+struct rtl8366_vlan_4k {
+	u16	vid;
+	u8	untag;
+	u8	member;
+	u8	fid;
+};
+
+int rtl8366_smi_init(struct rtl8366_smi *smi);
+void rtl8366_smi_cleanup(struct rtl8366_smi *smi);
+int rtl8366_smi_write_reg(struct rtl8366_smi *smi, u32 addr, u32 data);
+int rtl8366_smi_read_reg(struct rtl8366_smi *smi, u32 addr, u32 *data);
+int rtl8366_smi_rmwr(struct rtl8366_smi *smi, u32 addr, u32 mask, u32 data);
+
+#endif /*  _RTL8366_SMI_H */
diff --git a/target/linux/generic/files/drivers/net/phy/rtl8366rb.c b/target/linux/generic/files/drivers/net/phy/rtl8366rb.c
new file mode 100644
index 0000000000..2105b2bd4e
--- /dev/null
+++ b/target/linux/generic/files/drivers/net/phy/rtl8366rb.c
@@ -0,0 +1,1797 @@
+/*
+ * Platform driver for the Realtek RTL8366S ethernet switch
+ *
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/skbuff.h>
+#include <linux/switch.h>
+#include <linux/rtl8366rb.h>
+
+#include "rtl8366_smi.h"
+
+#ifdef CONFIG_RTL8366S_PHY_DEBUG_FS
+#include <linux/debugfs.h>
+#endif
+
+#define RTL8366S_DRIVER_DESC	"Realtek RTL8366RB ethernet switch driver"
+#define RTL8366S_DRIVER_VER	"0.2.2"
+
+#define RTL8366S_PHY_NO_MAX                 4
+#define RTL8366S_PHY_PAGE_MAX               7
+#define RTL8366S_PHY_ADDR_MAX               31
+
+#define RTL8366_CHIP_GLOBAL_CTRL_REG        0x0000
+#define RTL8366_CHIP_CTRL_VLAN              (1 << 13)
+#define RTL8366_CHIP_CTRL_VLAN_4KTB         (1 << 14)
+
+/* Switch Global Configuration register */
+#define RTL8366_SGCR			0x0000
+#define RTL8366_SGCR_EN_BC_STORM_CTRL	BIT(0)
+#define RTL8366_SGCR_MAX_LENGTH(_x)	(_x << 4)
+#define RTL8366_SGCR_MAX_LENGTH_MASK	RTL8366_SGCR_MAX_LENGTH(0x3)
+#define RTL8366_SGCR_MAX_LENGTH_1522	RTL8366_SGCR_MAX_LENGTH(0x0)
+#define RTL8366_SGCR_MAX_LENGTH_1536	RTL8366_SGCR_MAX_LENGTH(0x1)
+#define RTL8366_SGCR_MAX_LENGTH_1552	RTL8366_SGCR_MAX_LENGTH(0x2)
+#define RTL8366_SGCR_MAX_LENGTH_9216	RTL8366_SGCR_MAX_LENGTH(0x3)
+
+/* Port Enable Control register */
+#define RTL8366_PECR			0x0001
+
+/* Switch Security Control registers */
+#define RTL8366_SSCR0			0x0002
+#define RTL8366_SSCR1			0x0003
+#define RTL8366_SSCR2			0x0004
+#define RTL8366_SSCR2_DROP_UNKNOWN_DA	BIT(0)
+
+#define RTL8366_RESET_CTRL_REG              0x0100
+#define RTL8366_CHIP_CTRL_RESET_HW          1
+#define RTL8366_CHIP_CTRL_RESET_SW          (1 << 1)
+
+#define RTL8366S_CHIP_VERSION_CTRL_REG      0x050A
+#define RTL8366S_CHIP_VERSION_MASK          0xf
+#define RTL8366S_CHIP_ID_REG                0x0509
+#define RTL8366S_CHIP_ID_8366               0x5937
+
+/* PHY registers control */
+#define RTL8366S_PHY_ACCESS_CTRL_REG        0x8000
+#define RTL8366S_PHY_ACCESS_DATA_REG        0x8002
+
+#define RTL8366S_PHY_CTRL_READ              1
+#define RTL8366S_PHY_CTRL_WRITE             0
+
+#define RTL8366S_PHY_REG_MASK               0x1f
+#define RTL8366S_PHY_PAGE_OFFSET            5
+#define RTL8366S_PHY_PAGE_MASK              (0xf << 5)
+#define RTL8366S_PHY_NO_OFFSET              9
+#define RTL8366S_PHY_NO_MASK                (0x1f << 9)
+
+/* LED control registers */
+#define RTL8366_LED_BLINKRATE_REG           0x0430
+#define RTL8366_LED_BLINKRATE_BIT           0
+#define RTL8366_LED_BLINKRATE_MASK          0x0007
+
+#define RTL8366_LED_CTRL_REG                0x0431
+#define RTL8366_LED_0_1_CTRL_REG            0x0432
+#define RTL8366_LED_2_3_CTRL_REG            0x0433
+
+#define RTL8366S_MIB_COUNT                  33
+#define RTL8366S_GLOBAL_MIB_COUNT           1
+#define RTL8366S_MIB_COUNTER_PORT_OFFSET    0x0050
+#define RTL8366S_MIB_COUNTER_BASE           0x1000
+#define RTL8366S_MIB_CTRL_REG               0x13F0
+#define RTL8366S_MIB_CTRL_USER_MASK         0x0FFC
+#define RTL8366S_MIB_CTRL_BUSY_MASK         0x0001
+#define RTL8366S_MIB_CTRL_RESET_MASK        0x0001
+
+#define RTL8366S_MIB_CTRL_GLOBAL_RESET_MASK 0x0004
+#define RTL8366S_MIB_CTRL_PORT_RESET_BIT    0x0003
+#define RTL8366S_MIB_CTRL_PORT_RESET_MASK   0x01FC
+
+
+#define RTL8366S_PORT_VLAN_CTRL_BASE        0x0063
+#define RTL8366S_PORT_VLAN_CTRL_REG(_p)  \
+		(RTL8366S_PORT_VLAN_CTRL_BASE + (_p) / 4)
+#define RTL8366S_PORT_VLAN_CTRL_MASK	    0xf
+#define RTL8366S_PORT_VLAN_CTRL_SHIFT(_p)   (4 * ((_p) % 4))
+
+
+#define RTL8366S_VLAN_TABLE_READ_BASE       0x018C
+#define RTL8366S_VLAN_TABLE_WRITE_BASE      0x0185
+
+
+#define RTL8366S_TABLE_ACCESS_CTRL_REG      0x0180
+#define RTL8366S_TABLE_VLAN_READ_CTRL       0x0E01
+#define RTL8366S_TABLE_VLAN_WRITE_CTRL      0x0F01
+
+#define RTL8366S_VLAN_MEMCONF_BASE          0x0020
+
+
+#define RTL8366S_PORT_LINK_STATUS_BASE      0x0014
+#define RTL8366S_PORT_STATUS_SPEED_MASK     0x0003
+#define RTL8366S_PORT_STATUS_DUPLEX_MASK    0x0004
+#define RTL8366S_PORT_STATUS_LINK_MASK      0x0010
+#define RTL8366S_PORT_STATUS_TXPAUSE_MASK   0x0020
+#define RTL8366S_PORT_STATUS_RXPAUSE_MASK   0x0040
+#define RTL8366S_PORT_STATUS_AN_MASK        0x0080
+
+
+#define RTL8366_PORT_NUM_CPU                5
+#define RTL8366_NUM_PORTS                   6
+#define RTL8366_NUM_VLANS                   16
+#define RTL8366_NUM_LEDGROUPS               4
+#define RTL8366_NUM_VIDS                    4096
+#define RTL8366S_PRIORITYMAX                7
+#define RTL8366S_FIDMAX	                    7
+
+
+#define RTL8366_PORT_1                      (1 << 0) /* In userspace port 0 */
+#define RTL8366_PORT_2                      (1 << 1) /* In userspace port 1 */
+#define RTL8366_PORT_3                      (1 << 2) /* In userspace port 2 */
+#define RTL8366_PORT_4                      (1 << 3) /* In userspace port 3 */
+#define RTL8366_PORT_5                      (1 << 4) /* In userspace port 4 */
+
+#define RTL8366_PORT_CPU                    (1 << 5) /* CPU port */
+
+#define RTL8366_PORT_ALL                    (RTL8366_PORT_1 |       \
+					     RTL8366_PORT_2 |       \
+					     RTL8366_PORT_3 |       \
+					     RTL8366_PORT_4 |       \
+					     RTL8366_PORT_5 |       \
+					     RTL8366_PORT_CPU)
+
+#define RTL8366_PORT_ALL_BUT_CPU            (RTL8366_PORT_1 |       \
+					     RTL8366_PORT_2 |       \
+					     RTL8366_PORT_3 |       \
+					     RTL8366_PORT_4 |       \
+					     RTL8366_PORT_5)
+
+#define RTL8366_PORT_ALL_EXTERNAL           (RTL8366_PORT_1 |       \
+					     RTL8366_PORT_2 |       \
+					     RTL8366_PORT_3 |       \
+					     RTL8366_PORT_4)
+
+#define RTL8366_PORT_ALL_INTERNAL	     RTL8366_PORT_CPU
+
+struct rtl8366rb {
+	struct device		*parent;
+	struct rtl8366_smi	smi;
+	struct switch_dev	dev;
+	char			buf[4096];
+#ifdef CONFIG_RTL8366S_PHY_DEBUG_FS
+	struct dentry           *debugfs_root;
+#endif
+};
+
+struct rtl8366rb_vlan_mc {
+	u16	reserved2:1;
+	u16	priority:3;
+	u16	vid:12;
+	u16	untag:8;
+	u16	member:8;
+	u16	stag_mbr:8;
+	u16	stag_idx:3;
+	u16	reserved1:2;
+	u16	fid:3;
+};
+
+struct rtl8366rb_vlan_4k {
+	u16	reserved1:4;
+	u16	vid:12;
+	u16	untag:8;
+	u16	member:8;
+	u16	reserved2:13;
+	u16	fid:3;
+};
+
+#ifdef CONFIG_RTL8366S_PHY_DEBUG_FS
+u16 gl_dbg_reg;
+#endif
+
+struct mib_counter {
+	unsigned	offset;
+	unsigned	length;
+	const char	*name;
+};
+
+static struct mib_counter rtl8366rb_mib_counters[RTL8366S_MIB_COUNT] = {
+	{  0, 4, "IfInOctets"				},
+	{  4, 4, "EtherStatsOctets"			},
+	{  8, 2, "EtherStatsUnderSizePkts"		},
+	{ 10, 2, "EtherFragments"			},
+	{ 12, 2, "EtherStatsPkts64Octets"		},
+	{ 14, 2, "EtherStatsPkts65to127Octets"		},
+	{ 16, 2, "EtherStatsPkts128to255Octets"		},
+	{ 18, 2, "EtherStatsPkts256to511Octets"		},
+	{ 20, 2, "EtherStatsPkts512to1023Octets"	},
+	{ 22, 2, "EtherStatsPkts1024to1518Octets"	},
+	{ 24, 2, "EtherOversizeStats"			},
+	{ 26, 2, "EtherStatsJabbers"			},
+	{ 28, 2, "IfInUcastPkts"			},
+	{ 30, 2, "EtherStatsMulticastPkts"		},
+	{ 32, 2, "EtherStatsBroadcastPkts"		},
+	{ 34, 2, "EtherStatsDropEvents"			},
+	{ 36, 2, "Dot3StatsFCSErrors"			},
+	{ 38, 2, "Dot3StatsSymbolErrors"		},
+	{ 40, 2, "Dot3InPauseFrames"			},
+	{ 42, 2, "Dot3ControlInUnknownOpcodes"		},
+	{ 44, 4, "IfOutOctets"				},
+	{ 48, 2, "Dot3StatsSingleCollisionFrames"	},
+	{ 50, 2, "Dot3StatMultipleCollisionFrames"	},
+	{ 52, 2, "Dot3sDeferredTransmissions"		},
+	{ 54, 2, "Dot3StatsLateCollisions"		},
+	{ 56, 2, "EtherStatsCollisions"			},
+	{ 58, 2, "Dot3StatsExcessiveCollisions"		},
+	{ 60, 2, "Dot3OutPauseFrames"			},
+	{ 62, 2, "Dot1dBasePortDelayExceededDiscards"	},
+	{ 64, 2, "Dot1dTpPortInDiscards"		},
+	{ 66, 2, "IfOutUcastPkts"			},
+	{ 68, 2, "IfOutMulticastPkts"			},
+	{ 70, 2, "IfOutBroadcastPkts"			},
+};
+
+#define REG_WR(_smi, _reg, _val)					\
+	do {								\
+		err = rtl8366_smi_write_reg(_smi, _reg, _val);		\
+		if (err)						\
+			return err;					\
+	} while (0)
+
+#define REG_RMW(_smi, _reg, _mask, _val)				\
+	do {								\
+		err = rtl8366_smi_rmwr(_smi, _reg, _mask, _val);	\
+		if (err)						\
+			return err;					\
+	} while (0)
+
+static inline struct rtl8366rb *smi_to_rtl8366rb(struct rtl8366_smi *smi)
+{
+	return container_of(smi, struct rtl8366rb, smi);
+}
+
+static inline struct rtl8366rb *sw_to_rtl8366rb(struct switch_dev *sw)
+{
+	return container_of(sw, struct rtl8366rb, dev);
+}
+
+static inline struct rtl8366_smi *sw_to_rtl8366_smi(struct switch_dev *sw)
+{
+	struct rtl8366rb *rtl = sw_to_rtl8366rb(sw);
+	return &rtl->smi;
+}
+
+static int rtl8366rb_reset_chip(struct rtl8366_smi *smi)
+{
+	int timeout = 10;
+	u32 data;
+
+	rtl8366_smi_write_reg(smi, RTL8366_RESET_CTRL_REG,
+			      RTL8366_CHIP_CTRL_RESET_HW);
+	do {
+		msleep(1);
+		if (rtl8366_smi_read_reg(smi, RTL8366_RESET_CTRL_REG, &data))
+			return -EIO;
+
+		if (!(data & RTL8366_CHIP_CTRL_RESET_HW))
+			break;
+	} while (--timeout);
+
+	if (!timeout) {
+		printk("Timeout waiting for the switch to reset\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int rtl8366rb_hw_init(struct rtl8366_smi *smi)
+{
+	int err;
+
+	/* set maximum packet length to 1536 bytes */
+	REG_RMW(smi, RTL8366_SGCR, RTL8366_SGCR_MAX_LENGTH_MASK,
+		RTL8366_SGCR_MAX_LENGTH_1536);
+
+	/* enable all ports */
+	REG_WR(smi, RTL8366_PECR, 0);
+
+	/* disable learning for all ports */
+	REG_WR(smi, RTL8366_SSCR0, RTL8366_PORT_ALL);
+
+	/* disable auto ageing for all ports */
+	REG_WR(smi, RTL8366_SSCR1, RTL8366_PORT_ALL);
+
+	/* don't drop packets whose DA has not been learned */
+	REG_RMW(smi, RTL8366_SSCR2, RTL8366_SSCR2_DROP_UNKNOWN_DA, 0);
+
+	return 0;
+}
+
+static int rtl8366rb_read_phy_reg(struct rtl8366_smi *smi,
+				 u32 phy_no, u32 page, u32 addr, u32 *data)
+{
+	u32 reg;
+	int ret;
+
+	if (phy_no > RTL8366S_PHY_NO_MAX)
+		return -EINVAL;
+
+	if (page > RTL8366S_PHY_PAGE_MAX)
+		return -EINVAL;
+
+	if (addr > RTL8366S_PHY_ADDR_MAX)
+		return -EINVAL;
+
+	ret = rtl8366_smi_write_reg(smi, RTL8366S_PHY_ACCESS_CTRL_REG,
+				    RTL8366S_PHY_CTRL_READ);
+	if (ret)
+		return ret;
+
+	reg = 0x8000 | (1 << (phy_no + RTL8366S_PHY_NO_OFFSET)) |
+	      ((page << RTL8366S_PHY_PAGE_OFFSET) & RTL8366S_PHY_PAGE_MASK) |
+	      (addr & RTL8366S_PHY_REG_MASK);
+
+	ret = rtl8366_smi_write_reg(smi, reg, 0);
+	if (ret)
+		return ret;
+
+	ret = rtl8366_smi_read_reg(smi, RTL8366S_PHY_ACCESS_DATA_REG, data);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int rtl8366rb_write_phy_reg(struct rtl8366_smi *smi,
+				  u32 phy_no, u32 page, u32 addr, u32 data)
+{
+	u32 reg;
+	int ret;
+
+	if (phy_no > RTL8366S_PHY_NO_MAX)
+		return -EINVAL;
+
+	if (page > RTL8366S_PHY_PAGE_MAX)
+		return -EINVAL;
+
+	if (addr > RTL8366S_PHY_ADDR_MAX)
+		return -EINVAL;
+
+	ret = rtl8366_smi_write_reg(smi, RTL8366S_PHY_ACCESS_CTRL_REG,
+				    RTL8366S_PHY_CTRL_WRITE);
+	if (ret)
+		return ret;
+
+	reg = 0x8000 | (1 << (phy_no + RTL8366S_PHY_NO_OFFSET)) |
+	      ((page << RTL8366S_PHY_PAGE_OFFSET) & RTL8366S_PHY_PAGE_MASK) |
+	      (addr & RTL8366S_PHY_REG_MASK);
+
+	ret = rtl8366_smi_write_reg(smi, reg, data);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int rtl8366_get_mib_counter(struct rtl8366_smi *smi, int counter,
+				   int port, unsigned long long *val)
+{
+	int i;
+	int err;
+	u32 addr, data;
+	u64 mibvalue;
+
+	if (port > RTL8366_NUM_PORTS || counter >= RTL8366S_MIB_COUNT)
+		return -EINVAL;
+
+	addr = RTL8366S_MIB_COUNTER_BASE +
+	       RTL8366S_MIB_COUNTER_PORT_OFFSET * (port) +
+	       rtl8366rb_mib_counters[counter].offset;
+
+	/*
+	 * Writing access counter address first
+	 * then ASIC will prepare 64bits counter wait for being retrived
+	 */
+	data = 0; /* writing data will be discard by ASIC */
+	err = rtl8366_smi_write_reg(smi, addr, data);
+	if (err)
+		return err;
+
+	/* read MIB control register */
+	err =  rtl8366_smi_read_reg(smi, RTL8366S_MIB_CTRL_REG, &data);
+	if (err)
+		return err;
+
+	if (data & RTL8366S_MIB_CTRL_BUSY_MASK)
+		return -EBUSY;
+
+	if (data & RTL8366S_MIB_CTRL_RESET_MASK)
+		return -EIO;
+
+	mibvalue = 0;
+	for (i = rtl8366rb_mib_counters[counter].length; i > 0; i--) {
+		err = rtl8366_smi_read_reg(smi, addr + (i - 1), &data);
+		if (err)
+			return err;
+
+		mibvalue = (mibvalue << 16) | (data & 0xFFFF);
+	}
+
+	*val = mibvalue;
+	return 0;
+}
+
+static int rtl8366rb_get_vlan_4k(struct rtl8366_smi *smi, u32 vid,
+				 struct rtl8366_vlan_4k *vlan4k)
+{
+	struct rtl8366rb_vlan_4k vlan4k_priv;
+	int err;
+	u32 data;
+	u16 *tableaddr;
+
+	memset(vlan4k, '\0', sizeof(struct rtl8366_vlan_4k));
+	vlan4k_priv.vid = vid;
+
+	if (vid >= RTL8366_NUM_VIDS)
+		return -EINVAL;
+
+	tableaddr = (u16 *)&vlan4k_priv;
+
+	/* write VID */
+	data = *tableaddr;
+	err = rtl8366_smi_write_reg(smi, RTL8366S_VLAN_TABLE_WRITE_BASE, data);
+	if (err)
+		return err;
+
+	/* write table access control word */
+	err = rtl8366_smi_write_reg(smi, RTL8366S_TABLE_ACCESS_CTRL_REG,
+				    RTL8366S_TABLE_VLAN_READ_CTRL);
+	if (err)
+		return err;
+
+	err = rtl8366_smi_read_reg(smi, RTL8366S_VLAN_TABLE_READ_BASE, &data);
+	if (err)
+		return err;
+
+	*tableaddr = data;
+	tableaddr++;
+
+	err = rtl8366_smi_read_reg(smi, RTL8366S_VLAN_TABLE_READ_BASE + 1,
+				   &data);
+	if (err)
+		return err;
+
+	*tableaddr = data;
+	tableaddr++;
+
+	err = rtl8366_smi_read_reg(smi, RTL8366S_VLAN_TABLE_READ_BASE + 2,
+				   &data);
+	if (err)
+		return err;
+	*tableaddr = data;
+
+	vlan4k->vid = vid;
+	vlan4k->untag = vlan4k_priv.untag;
+	vlan4k->member = vlan4k_priv.member;
+	vlan4k->fid = vlan4k_priv.fid;
+
+	return 0;
+}
+
+static int rtl8366rb_set_vlan_4k(struct rtl8366_smi *smi,
+				 const struct rtl8366_vlan_4k *vlan4k)
+{
+	struct rtl8366rb_vlan_4k vlan4k_priv;
+	int err;
+	u32 data;
+	u16 *tableaddr;
+
+	if (vlan4k->vid >= RTL8366_NUM_VIDS ||
+	    vlan4k->member > RTL8366_PORT_ALL ||
+	    vlan4k->untag > RTL8366_PORT_ALL ||
+	    vlan4k->fid > RTL8366S_FIDMAX)
+		return -EINVAL;
+
+	vlan4k_priv.vid = vlan4k->vid;
+	vlan4k_priv.untag = vlan4k->untag;
+	vlan4k_priv.member = vlan4k->member;
+	vlan4k_priv.fid = vlan4k->fid;
+
+	tableaddr = (u16 *)&vlan4k_priv;
+
+	data = *tableaddr;
+
+	err = rtl8366_smi_write_reg(smi, RTL8366S_VLAN_TABLE_WRITE_BASE, data);
+	if (err)
+		return err;
+
+	tableaddr++;
+
+	data = *tableaddr;
+
+	err = rtl8366_smi_write_reg(smi, RTL8366S_VLAN_TABLE_WRITE_BASE + 1,
+				    data);
+	if (err)
+		return err;
+
+	tableaddr++;
+
+	data = *tableaddr;
+
+	err = rtl8366_smi_write_reg(smi, RTL8366S_VLAN_TABLE_WRITE_BASE + 2,
+				    data);
+	if (err)
+		return err;
+
+	/* write table access control word */
+	err = rtl8366_smi_write_reg(smi, RTL8366S_TABLE_ACCESS_CTRL_REG,
+				    RTL8366S_TABLE_VLAN_WRITE_CTRL);
+
+	return err;
+}
+
+static int rtl8366rb_get_vlan_mc(struct rtl8366_smi *smi, u32 index,
+				 struct rtl8366_vlan_mc *vlanmc)
+{
+	struct rtl8366rb_vlan_mc vlanmc_priv;
+	int err;
+	u32 addr;
+	u32 data;
+	u16 *tableaddr;
+
+	memset(vlanmc, '\0', sizeof(struct rtl8366_vlan_mc));
+
+	if (index >= RTL8366_NUM_VLANS)
+		return -EINVAL;
+
+	tableaddr = (u16 *)&vlanmc_priv;
+
+	addr = RTL8366S_VLAN_MEMCONF_BASE + (index * 3);
+	err = rtl8366_smi_read_reg(smi, addr, &data);
+	if (err)
+		return err;
+
+	*tableaddr = data;
+	tableaddr++;
+
+	addr = RTL8366S_VLAN_MEMCONF_BASE + 1 + (index * 3);
+	err = rtl8366_smi_read_reg(smi, addr, &data);
+	if (err)
+		return err;
+
+	*tableaddr = data;
+	tableaddr++;
+
+	addr = RTL8366S_VLAN_MEMCONF_BASE + 2 + (index * 3);
+	err = rtl8366_smi_read_reg(smi, addr, &data);
+	if (err)
+		return err;
+
+	*tableaddr = data;
+
+	vlanmc->vid = vlanmc_priv.vid;
+	vlanmc->priority = vlanmc_priv.priority;
+	vlanmc->untag = vlanmc_priv.untag;
+	vlanmc->member = vlanmc_priv.member;
+	vlanmc->fid = vlanmc_priv.fid;
+
+	return 0;
+}
+
+static int rtl8366rb_set_vlan_mc(struct rtl8366_smi *smi, u32 index,
+				 const struct rtl8366_vlan_mc *vlanmc)
+{
+	struct rtl8366rb_vlan_mc vlanmc_priv;
+	int err;
+	u32 addr;
+	u32 data;
+	u16 *tableaddr;
+
+	if (index >= RTL8366_NUM_VLANS ||
+	    vlanmc->vid >= RTL8366_NUM_VIDS ||
+	    vlanmc->priority > RTL8366S_PRIORITYMAX ||
+	    vlanmc->member > RTL8366_PORT_ALL ||
+	    vlanmc->untag > RTL8366_PORT_ALL ||
+	    vlanmc->fid > RTL8366S_FIDMAX)
+		return -EINVAL;
+
+	vlanmc_priv.vid = vlanmc->vid;
+	vlanmc_priv.priority = vlanmc->priority;
+	vlanmc_priv.untag = vlanmc->untag;
+	vlanmc_priv.member = vlanmc->member;
+	vlanmc_priv.stag_mbr = 0;
+	vlanmc_priv.stag_idx = 0;
+	vlanmc_priv.fid = vlanmc->fid;
+
+	addr = RTL8366S_VLAN_MEMCONF_BASE + (index * 3);
+
+	tableaddr = (u16 *)&vlanmc_priv;
+	data = *tableaddr;
+
+	err = rtl8366_smi_write_reg(smi, addr, data);
+	if (err)
+		return err;
+
+	addr = RTL8366S_VLAN_MEMCONF_BASE + 1 + (index * 3);
+
+	tableaddr++;
+	data = *tableaddr;
+
+	err = rtl8366_smi_write_reg(smi, addr, data);
+	if (err)
+		return err;
+
+	addr = RTL8366S_VLAN_MEMCONF_BASE + 2 + (index * 3);
+
+	tableaddr++;
+	data = *tableaddr;
+
+	err = rtl8366_smi_write_reg(smi, addr, data);
+	if (err)
+		return err;
+	return 0;
+}
+
+static int rtl8366rb_get_mc_index(struct rtl8366_smi *smi, int port, int *val)
+{
+	u32 data;
+	int err;
+
+	if (port >= RTL8366_NUM_PORTS)
+		return -EINVAL;
+
+	err = rtl8366_smi_read_reg(smi, RTL8366S_PORT_VLAN_CTRL_REG(port),
+				   &data);
+	if (err)
+		return err;
+
+	*val = (data >> RTL8366S_PORT_VLAN_CTRL_SHIFT(port)) &
+	       RTL8366S_PORT_VLAN_CTRL_MASK;
+
+	return 0;
+
+}
+
+static int rtl8366rb_set_mc_index(struct rtl8366_smi *smi, int port, int index)
+{
+	if (port >= RTL8366_NUM_PORTS || index >= RTL8366_NUM_VLANS)
+		return -EINVAL;
+
+	return rtl8366_smi_rmwr(smi, RTL8366S_PORT_VLAN_CTRL_REG(port),
+				RTL8366S_PORT_VLAN_CTRL_MASK <<
+					RTL8366S_PORT_VLAN_CTRL_SHIFT(port),
+				(index & RTL8366S_PORT_VLAN_CTRL_MASK) <<
+					RTL8366S_PORT_VLAN_CTRL_SHIFT(port));
+}
+
+static int rtl8366rb_set_vlan(struct rtl8366_smi *smi, int vid, u32 member,
+			      u32 untag, u32 fid)
+{
+	struct rtl8366_vlan_4k vlan4k;
+	int err;
+	int i;
+
+	/* Update the 4K table */
+	err = rtl8366rb_get_vlan_4k(smi, vid, &vlan4k);
+	if (err)
+		return err;
+
+	vlan4k.member = member;
+	vlan4k.untag = untag;
+	vlan4k.fid = fid;
+	err = rtl8366rb_set_vlan_4k(smi, &vlan4k);
+	if (err)
+		return err;
+
+	/* Try to find an existing MC entry for this VID */
+	for (i = 0; i < RTL8366_NUM_VLANS; i++) {
+		struct rtl8366_vlan_mc vlanmc;
+
+		err = rtl8366rb_get_vlan_mc(smi, i, &vlanmc);
+		if (err)
+			return err;
+
+		if (vid == vlanmc.vid) {
+			/* update the MC entry */
+			vlanmc.member = member;
+			vlanmc.untag = untag;
+			vlanmc.fid = fid;
+
+			err = rtl8366rb_set_vlan_mc(smi, i, &vlanmc);
+			break;
+		}
+	}
+
+	return err;
+}
+
+static int rtl8366rb_get_pvid(struct rtl8366_smi *smi, int port, int *val)
+{
+	struct rtl8366_vlan_mc vlanmc;
+	int err;
+	int index;
+
+	err = rtl8366rb_get_mc_index(smi, port, &index);
+	if (err)
+		return err;
+
+	err = rtl8366rb_get_vlan_mc(smi, index, &vlanmc);
+	if (err)
+		return err;
+
+	*val = vlanmc.vid;
+	return 0;
+}
+
+static int rtl8366rb_mc_is_used(struct rtl8366_smi *smi, int mc_index,
+				int *used)
+{
+	int err;
+	int i;
+
+	*used = 0;
+	for (i = 0; i < RTL8366_NUM_PORTS; i++) {
+		int index = 0;
+
+		err = rtl8366rb_get_mc_index(smi, i, &index);
+		if (err)
+			return err;
+
+		if (mc_index == index) {
+			*used = 1;
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static int rtl8366rb_set_pvid(struct rtl8366_smi *smi, unsigned port,
+			      unsigned vid)
+{
+	struct rtl8366_vlan_mc vlanmc;
+	struct rtl8366_vlan_4k vlan4k;
+	int err;
+	int i;
+
+	/* Try to find an existing MC entry for this VID */
+	for (i = 0; i < RTL8366_NUM_VLANS; i++) {
+		err = rtl8366rb_get_vlan_mc(smi, i, &vlanmc);
+		if (err)
+			return err;
+
+		if (vid == vlanmc.vid) {
+			err = rtl8366rb_set_vlan_mc(smi, i, &vlanmc);
+			if (err)
+				return err;
+
+			err = rtl8366rb_set_mc_index(smi, port, i);
+			return err;
+		}
+	}
+
+	/* We have no MC entry for this VID, try to find an empty one */
+	for (i = 0; i < RTL8366_NUM_VLANS; i++) {
+		err = rtl8366rb_get_vlan_mc(smi, i, &vlanmc);
+		if (err)
+			return err;
+
+		if (vlanmc.vid == 0 && vlanmc.member == 0) {
+			/* Update the entry from the 4K table */
+			err = rtl8366rb_get_vlan_4k(smi, vid, &vlan4k);
+			if (err)
+				return err;
+
+			vlanmc.vid = vid;
+			vlanmc.member = vlan4k.member;
+			vlanmc.untag = vlan4k.untag;
+			vlanmc.fid = vlan4k.fid;
+			err = rtl8366rb_set_vlan_mc(smi, i, &vlanmc);
+			if (err)
+				return err;
+
+			err = rtl8366rb_set_mc_index(smi, port, i);
+			return err;
+		}
+	}
+
+	/* MC table is full, try to find an unused entry and replace it */
+	for (i = 0; i < RTL8366_NUM_VLANS; i++) {
+		int used;
+
+		err = rtl8366rb_mc_is_used(smi, i, &used);
+		if (err)
+			return err;
+
+		if (!used) {
+			/* Update the entry from the 4K table */
+			err = rtl8366rb_get_vlan_4k(smi, vid, &vlan4k);
+			if (err)
+				return err;
+
+			vlanmc.vid = vid;
+			vlanmc.member = vlan4k.member;
+			vlanmc.untag = vlan4k.untag;
+			vlanmc.fid = vlan4k.fid;
+			err = rtl8366rb_set_vlan_mc(smi, i, &vlanmc);
+			if (err)
+				return err;
+
+			err = rtl8366rb_set_mc_index(smi, port, i);
+			return err;
+		}
+	}
+
+	dev_err(smi->parent,
+		"all VLAN member configurations are in use\n");
+
+	return -ENOSPC;
+}
+
+static int rtl8366rb_vlan_set_vlan(struct rtl8366_smi *smi, int enable)
+{
+	return rtl8366_smi_rmwr(smi, RTL8366_CHIP_GLOBAL_CTRL_REG,
+				RTL8366_CHIP_CTRL_VLAN,
+				(enable) ? RTL8366_CHIP_CTRL_VLAN : 0);
+}
+
+static int rtl8366rb_vlan_set_4ktable(struct rtl8366_smi *smi, int enable)
+{
+	return rtl8366_smi_rmwr(smi, RTL8366_CHIP_GLOBAL_CTRL_REG,
+				RTL8366_CHIP_CTRL_VLAN_4KTB,
+				(enable) ? RTL8366_CHIP_CTRL_VLAN_4KTB : 0);
+}
+
+static int rtl8366rb_reset_vlan(struct rtl8366_smi *smi)
+{
+	struct rtl8366_vlan_mc vlanmc;
+	int err;
+	int i;
+
+	/* clear VLAN member configurations */
+	vlanmc.vid = 0;
+	vlanmc.priority = 0;
+	vlanmc.member = 0;
+	vlanmc.untag = 0;
+	vlanmc.fid = 0;
+	for (i = 0; i < RTL8366_NUM_VLANS; i++) {
+		err = rtl8366rb_set_vlan_mc(smi, i, &vlanmc);
+		if (err)
+			return err;
+	}
+
+	for (i = 0; i < RTL8366_NUM_PORTS; i++) {
+		if (i == RTL8366_PORT_CPU)
+			continue;
+
+		err = rtl8366rb_set_vlan(smi, (i + 1),
+					 (1 << i) | RTL8366_PORT_CPU,
+					 (1 << i) | RTL8366_PORT_CPU,
+					 0);
+		if (err)
+			return err;
+
+		err = rtl8366rb_set_pvid(smi, i, (i + 1));
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_RTL8366S_PHY_DEBUG_FS
+static int rtl8366rb_debugfs_open(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+	return 0;
+}
+
+static ssize_t rtl8366rb_read_debugfs_mibs(struct file *file,
+					  char __user *user_buf,
+					  size_t count, loff_t *ppos)
+{
+	struct rtl8366rb *rtl = (struct rtl8366rb *)file->private_data;
+	struct rtl8366_smi *smi = &rtl->smi;
+	int i, j, len = 0;
+	char *buf = rtl->buf;
+
+	len += snprintf(buf + len, sizeof(rtl->buf) - len,
+			"%-36s %12s %12s %12s %12s %12s %12s\n",
+			"Counter",
+			"Port 0", "Port 1", "Port 2",
+			"Port 3", "Port 4", "Port 5");
+
+	for (i = 0; i < ARRAY_SIZE(rtl8366rb_mib_counters); ++i) {
+		len += snprintf(buf + len, sizeof(rtl->buf) - len, "%-36s ",
+				rtl8366rb_mib_counters[i].name);
+		for (j = 0; j < RTL8366_NUM_PORTS; ++j) {
+			unsigned long long counter = 0;
+
+			if (!rtl8366_get_mib_counter(smi, i, j, &counter))
+				len += snprintf(buf + len,
+						sizeof(rtl->buf) - len,
+						"%12llu ", counter);
+			else
+				len += snprintf(buf + len,
+						sizeof(rtl->buf) - len,
+						"%12s ", "error");
+		}
+		len += snprintf(buf + len, sizeof(rtl->buf) - len, "\n");
+	}
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t rtl8366rb_read_debugfs_vlan_mc(struct file *file,
+					      char __user *user_buf,
+					      size_t count, loff_t *ppos)
+{
+	struct rtl8366rb *rtl = (struct rtl8366rb *)file->private_data;
+	struct rtl8366_smi *smi = &rtl->smi;
+	int i, len = 0;
+	char *buf = rtl->buf;
+
+	len += snprintf(buf + len, sizeof(rtl->buf) - len,
+			"%2s %6s %4s %6s %6s %3s\n",
+			"id", "vid","prio", "member", "untag", "fid");
+
+	for (i = 0; i < RTL8366_NUM_VLANS; ++i) {
+		struct rtl8366_vlan_mc vlanmc;
+
+		rtl8366rb_get_vlan_mc(smi, i, &vlanmc);
+
+		len += snprintf(buf + len, sizeof(rtl->buf) - len,
+				"%2d %6d %4d 0x%04x 0x%04x %3d\n",
+				i, vlanmc.vid, vlanmc.priority,
+				vlanmc.member, vlanmc.untag, vlanmc.fid);
+	}
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t rtl8366rb_read_debugfs_reg(struct file *file,
+					 char __user *user_buf,
+					 size_t count, loff_t *ppos)
+{
+	struct rtl8366rb *rtl = (struct rtl8366rb *)file->private_data;
+	struct rtl8366_smi *smi = &rtl->smi;
+	u32 t, reg = gl_dbg_reg;
+	int err, len = 0;
+	char *buf = rtl->buf;
+
+	memset(buf, '\0', sizeof(rtl->buf));
+
+	err = rtl8366_smi_read_reg(smi, reg, &t);
+	if (err) {
+		len += snprintf(buf, sizeof(rtl->buf),
+				"Read failed (reg: 0x%04x)\n", reg);
+		return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+	}
+
+	len += snprintf(buf, sizeof(rtl->buf), "reg = 0x%04x, val = 0x%04x\n",
+			reg, t);
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t rtl8366rb_write_debugfs_reg(struct file *file,
+					  const char __user *user_buf,
+					  size_t count, loff_t *ppos)
+{
+	struct rtl8366rb *rtl = (struct rtl8366rb *)file->private_data;
+	struct rtl8366_smi *smi = &rtl->smi;
+	unsigned long data;
+	u32 reg = gl_dbg_reg;
+	int err;
+	size_t len;
+	char *buf = rtl->buf;
+
+	len = min(count, sizeof(rtl->buf) - 1);
+	if (copy_from_user(buf, user_buf, len)) {
+		dev_err(rtl->parent, "copy from user failed\n");
+		return -EFAULT;
+	}
+
+	buf[len] = '\0';
+	if (len > 0 && buf[len - 1] == '\n')
+		buf[len - 1] = '\0';
+
+
+	if (strict_strtoul(buf, 16, &data)) {
+		dev_err(rtl->parent, "Invalid reg value %s\n", buf);
+	} else {
+		err = rtl8366_smi_write_reg(smi, reg, data);
+		if (err) {
+			dev_err(rtl->parent,
+				"writing reg 0x%04x val 0x%04lx failed\n",
+				reg, data);
+		}
+	}
+
+	return count;
+}
+
+static const struct file_operations fops_rtl8366rb_regs = {
+	.read = rtl8366rb_read_debugfs_reg,
+	.write = rtl8366rb_write_debugfs_reg,
+	.open = rtl8366rb_debugfs_open,
+	.owner = THIS_MODULE
+};
+
+static const struct file_operations fops_rtl8366rb_vlan_mc = {
+	.read = rtl8366rb_read_debugfs_vlan_mc,
+	.open = rtl8366rb_debugfs_open,
+	.owner = THIS_MODULE
+};
+
+static const struct file_operations fops_rtl8366rb_mibs = {
+	.read = rtl8366rb_read_debugfs_mibs,
+	.open = rtl8366rb_debugfs_open,
+	.owner = THIS_MODULE
+};
+
+static void rtl8366rb_debugfs_init(struct rtl8366rb *rtl)
+{
+	struct dentry *node;
+	struct dentry *root;
+
+	if (!rtl->debugfs_root)
+		rtl->debugfs_root = debugfs_create_dir("rtl8366rb", NULL);
+
+	if (!rtl->debugfs_root) {
+		dev_err(rtl->parent, "Unable to create debugfs dir\n");
+		return;
+	}
+	root = rtl->debugfs_root;
+
+	node = debugfs_create_x16("reg", S_IRUGO | S_IWUSR, root, &gl_dbg_reg);
+	if (!node) {
+		dev_err(rtl->parent, "Creating debugfs file '%s' failed\n",
+			"reg");
+		return;
+	}
+
+	node = debugfs_create_file("val", S_IRUGO | S_IWUSR, root, rtl,
+				   &fops_rtl8366rb_regs);
+	if (!node) {
+		dev_err(rtl->parent, "Creating debugfs file '%s' failed\n",
+			"val");
+		return;
+	}
+
+	node = debugfs_create_file("vlan_mc", S_IRUSR, root, rtl,
+				   &fops_rtl8366rb_vlan_mc);
+	if (!node) {
+		dev_err(rtl->parent, "Creating debugfs file '%s' failed\n",
+			"vlan_mc");
+		return;
+	}
+
+	node = debugfs_create_file("mibs", S_IRUSR, root, rtl,
+				   &fops_rtl8366rb_mibs);
+	if (!node) {
+		dev_err(rtl->parent, "Creating debugfs file '%s' failed\n",
+			"mibs");
+		return;
+	}
+}
+
+static void rtl8366rb_debugfs_remove(struct rtl8366rb *rtl)
+{
+	if (rtl->debugfs_root) {
+		debugfs_remove_recursive(rtl->debugfs_root);
+		rtl->debugfs_root = NULL;
+	}
+}
+
+#else
+static inline void rtl8366rb_debugfs_init(struct rtl8366rb *rtl) {}
+static inline void rtl8366rb_debugfs_remove(struct rtl8366rb *rtl) {}
+#endif /* CONFIG_RTL8366S_PHY_DEBUG_FS */
+
+static int rtl8366rb_sw_reset_mibs(struct switch_dev *dev,
+				  const struct switch_attr *attr,
+				  struct switch_val *val)
+{
+	struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+	int err = 0;
+
+	if (val->value.i == 1)
+		err = rtl8366_smi_rmwr(smi, RTL8366S_MIB_CTRL_REG, 0, (1 << 2));
+
+	return err;
+}
+
+static int rtl8366rb_sw_get_vlan_enable(struct switch_dev *dev,
+				       const struct switch_attr *attr,
+				       struct switch_val *val)
+{
+	struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+	u32 data;
+
+	if (attr->ofs == 1) {
+		rtl8366_smi_read_reg(smi, RTL8366_CHIP_GLOBAL_CTRL_REG, &data);
+
+		if (data & RTL8366_CHIP_CTRL_VLAN)
+			val->value.i = 1;
+		else
+			val->value.i = 0;
+	} else if (attr->ofs == 2) {
+		rtl8366_smi_read_reg(smi, RTL8366_CHIP_GLOBAL_CTRL_REG, &data);
+
+		if (data & RTL8366_CHIP_CTRL_VLAN_4KTB)
+			val->value.i = 1;
+		else
+			val->value.i = 0;
+	}
+
+	return 0;
+}
+
+static int rtl8366rb_sw_get_blinkrate(struct switch_dev *dev,
+				     const struct switch_attr *attr,
+				     struct switch_val *val)
+{
+	struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+	u32 data;
+
+	rtl8366_smi_read_reg(smi, RTL8366_LED_BLINKRATE_REG, &data);
+
+	val->value.i = (data & (RTL8366_LED_BLINKRATE_MASK));
+
+	return 0;
+}
+
+static int rtl8366rb_sw_set_blinkrate(struct switch_dev *dev,
+				    const struct switch_attr *attr,
+				    struct switch_val *val)
+{
+	struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+
+	if (val->value.i >= 6)
+		return -EINVAL;
+
+	return rtl8366_smi_rmwr(smi, RTL8366_LED_BLINKRATE_REG,
+				RTL8366_LED_BLINKRATE_MASK,
+				val->value.i);
+}
+
+static int rtl8366rb_sw_set_vlan_enable(struct switch_dev *dev,
+				       const struct switch_attr *attr,
+				       struct switch_val *val)
+{
+	struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+
+	if (attr->ofs == 1)
+		return rtl8366rb_vlan_set_vlan(smi, val->value.i);
+	else
+		return rtl8366rb_vlan_set_4ktable(smi, val->value.i);
+}
+
+static const char *rtl8366rb_speed_str(unsigned speed)
+{
+	switch (speed) {
+	case 0:
+		return "10baseT";
+	case 1:
+		return "100baseT";
+	case 2:
+		return "1000baseT";
+	}
+
+	return "unknown";
+}
+
+static int rtl8366rb_sw_get_port_link(struct switch_dev *dev,
+				     const struct switch_attr *attr,
+				     struct switch_val *val)
+{
+	struct rtl8366rb *rtl = sw_to_rtl8366rb(dev);
+	struct rtl8366_smi *smi = &rtl->smi;
+	u32 len = 0, data = 0;
+
+	if (val->port_vlan >= RTL8366_NUM_PORTS)
+		return -EINVAL;
+
+	memset(rtl->buf, '\0', sizeof(rtl->buf));
+	rtl8366_smi_read_reg(smi, RTL8366S_PORT_LINK_STATUS_BASE +
+			     (val->port_vlan / 2), &data);
+
+	if (val->port_vlan % 2)
+		data = data >> 8;
+
+	if (data & RTL8366S_PORT_STATUS_LINK_MASK) {
+		len = snprintf(rtl->buf, sizeof(rtl->buf),
+				"port:%d link:up speed:%s %s-duplex %s%s%s",
+				val->port_vlan,
+				rtl8366rb_speed_str(data &
+					  RTL8366S_PORT_STATUS_SPEED_MASK),
+				(data & RTL8366S_PORT_STATUS_DUPLEX_MASK) ?
+					"full" : "half",
+				(data & RTL8366S_PORT_STATUS_TXPAUSE_MASK) ?
+					"tx-pause ": "",
+				(data & RTL8366S_PORT_STATUS_RXPAUSE_MASK) ?
+					"rx-pause " : "",
+				(data & RTL8366S_PORT_STATUS_AN_MASK) ?
+					"nway ": "");
+	} else {
+		len = snprintf(rtl->buf, sizeof(rtl->buf), "port:%d link: down",
+				val->port_vlan);
+	}
+
+	val->value.s = rtl->buf;
+	val->len = len;
+
+	return 0;
+}
+
+static int rtl8366rb_sw_get_vlan_info(struct switch_dev *dev,
+				     const struct switch_attr *attr,
+				     struct switch_val *val)
+{
+	int i;
+	u32 len = 0;
+	struct rtl8366_vlan_4k vlan4k;
+	struct rtl8366rb *rtl = sw_to_rtl8366rb(dev);
+	struct rtl8366_smi *smi = &rtl->smi;
+	char *buf = rtl->buf;
+	int err;
+
+	if (val->port_vlan == 0 || val->port_vlan >= RTL8366_NUM_VLANS)
+		return -EINVAL;
+
+	memset(buf, '\0', sizeof(rtl->buf));
+
+	err = rtl8366rb_get_vlan_4k(smi, val->port_vlan, &vlan4k);
+	if (err)
+		return err;
+
+	len += snprintf(buf + len, sizeof(rtl->buf) - len,
+			"VLAN %d: Ports: '", vlan4k.vid);
+
+	for (i = 0; i < RTL8366_NUM_PORTS; i++) {
+		if (!(vlan4k.member & (1 << i)))
+			continue;
+
+		len += snprintf(buf + len, sizeof(rtl->buf) - len, "%d%s", i,
+				(vlan4k.untag & (1 << i)) ? "" : "t");
+	}
+
+	len += snprintf(buf + len, sizeof(rtl->buf) - len,
+			"', members=%04x, untag=%04x, fid=%u",
+			vlan4k.member, vlan4k.untag, vlan4k.fid);
+
+	val->value.s = buf;
+	val->len = len;
+
+	return 0;
+}
+
+static int rtl8366rb_sw_set_port_led(struct switch_dev *dev,
+				    const struct switch_attr *attr,
+				    struct switch_val *val)
+{
+	struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+	u32 data;
+	u32 mask;
+	u32 reg;
+
+	if (val->port_vlan >= RTL8366_NUM_PORTS)
+		return -EINVAL;
+
+	if (val->port_vlan == RTL8366_PORT_NUM_CPU) {
+		reg = RTL8366_LED_BLINKRATE_REG;
+		mask = 0xF << 4;
+		data = val->value.i << 4;
+	} else {
+		reg = RTL8366_LED_CTRL_REG;
+		mask = 0xF << (val->port_vlan * 4),
+		data = val->value.i << (val->port_vlan * 4);
+	}
+
+	return rtl8366_smi_rmwr(smi, RTL8366_LED_BLINKRATE_REG, mask, data);
+}
+
+static int rtl8366rb_sw_get_port_led(struct switch_dev *dev,
+				    const struct switch_attr *attr,
+				    struct switch_val *val)
+{
+	struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+	u32 data = 0;
+
+	if (val->port_vlan >= RTL8366_NUM_LEDGROUPS)
+		return -EINVAL;
+
+	rtl8366_smi_read_reg(smi, RTL8366_LED_CTRL_REG, &data);
+	val->value.i = (data >> (val->port_vlan * 4)) & 0x000F;
+
+	return 0;
+}
+
+static int rtl8366rb_sw_reset_port_mibs(struct switch_dev *dev,
+				       const struct switch_attr *attr,
+				       struct switch_val *val)
+{
+	struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+
+	if (val->port_vlan >= RTL8366_NUM_PORTS)
+		return -EINVAL;
+
+	return rtl8366_smi_rmwr(smi, RTL8366S_MIB_CTRL_REG,
+				0, (1 << (val->port_vlan + 3)));
+}
+
+static int rtl8366rb_sw_get_port_mib(struct switch_dev *dev,
+				    const struct switch_attr *attr,
+				    struct switch_val *val)
+{
+	struct rtl8366rb *rtl = sw_to_rtl8366rb(dev);
+	struct rtl8366_smi *smi = &rtl->smi;
+	int i, len = 0;
+	unsigned long long counter = 0;
+	char *buf = rtl->buf;
+
+	if (val->port_vlan >= RTL8366_NUM_PORTS)
+		return -EINVAL;
+
+	len += snprintf(buf + len, sizeof(rtl->buf) - len,
+			"Port %d MIB counters\n",
+			val->port_vlan);
+
+	for (i = 0; i < ARRAY_SIZE(rtl8366rb_mib_counters); ++i) {
+		len += snprintf(buf + len, sizeof(rtl->buf) - len,
+				"%-36s: ", rtl8366rb_mib_counters[i].name);
+		if (!rtl8366_get_mib_counter(smi, i, val->port_vlan, &counter))
+			len += snprintf(buf + len, sizeof(rtl->buf) - len,
+					"%llu\n", counter);
+		else
+			len += snprintf(buf + len, sizeof(rtl->buf) - len,
+					"%s\n", "error");
+	}
+
+	val->value.s = buf;
+	val->len = len;
+	return 0;
+}
+
+static int rtl8366rb_sw_get_vlan_ports(struct switch_dev *dev,
+				      struct switch_val *val)
+{
+	struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+	struct switch_port *port;
+	struct rtl8366_vlan_4k vlan4k;
+	int i;
+
+	if (val->port_vlan == 0 || val->port_vlan >= RTL8366_NUM_VLANS)
+		return -EINVAL;
+
+	rtl8366rb_get_vlan_4k(smi, val->port_vlan, &vlan4k);
+
+	port = &val->value.ports[0];
+	val->len = 0;
+	for (i = 0; i < RTL8366_NUM_PORTS; i++) {
+		if (!(vlan4k.member & BIT(i)))
+			continue;
+
+		port->id = i;
+		port->flags = (vlan4k.untag & BIT(i)) ?
+					0 : BIT(SWITCH_PORT_FLAG_TAGGED);
+		val->len++;
+		port++;
+	}
+	return 0;
+}
+
+static int rtl8366rb_sw_set_vlan_ports(struct switch_dev *dev,
+				      struct switch_val *val)
+{
+	struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+	struct switch_port *port;
+	u32 member = 0;
+	u32 untag = 0;
+	int i;
+
+	if (val->port_vlan == 0 || val->port_vlan >= RTL8366_NUM_VLANS)
+		return -EINVAL;
+
+	port = &val->value.ports[0];
+	for (i = 0; i < val->len; i++, port++) {
+		member |= BIT(port->id);
+
+		if (!(port->flags & BIT(SWITCH_PORT_FLAG_TAGGED)))
+			untag |= BIT(port->id);
+	}
+
+	return rtl8366rb_set_vlan(smi, val->port_vlan, member, untag, 0);
+}
+
+static int rtl8366rb_sw_get_port_pvid(struct switch_dev *dev, int port, int *val)
+{
+	struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+	return rtl8366rb_get_pvid(smi, port, val);
+}
+
+static int rtl8366rb_sw_set_port_pvid(struct switch_dev *dev, int port, int val)
+{
+	struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+	return rtl8366rb_set_pvid(smi, port, val);
+}
+
+static int rtl8366rb_sw_reset_switch(struct switch_dev *dev)
+{
+	struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+	int err;
+
+	err = rtl8366rb_reset_chip(smi);
+	if (err)
+		return err;
+
+	err = rtl8366rb_hw_init(smi);
+	if (err)
+		return err;
+
+	return rtl8366rb_reset_vlan(smi);
+}
+
+static struct switch_attr rtl8366rb_globals[] = {
+	{
+		.type = SWITCH_TYPE_INT,
+		.name = "enable_vlan",
+		.description = "Enable VLAN mode",
+		.set = rtl8366rb_sw_set_vlan_enable,
+		.get = rtl8366rb_sw_get_vlan_enable,
+		.max = 1,
+		.ofs = 1
+	}, {
+		.type = SWITCH_TYPE_INT,
+		.name = "enable_vlan4k",
+		.description = "Enable VLAN 4K mode",
+		.set = rtl8366rb_sw_set_vlan_enable,
+		.get = rtl8366rb_sw_get_vlan_enable,
+		.max = 1,
+		.ofs = 2
+	}, {
+		.type = SWITCH_TYPE_INT,
+		.name = "reset_mibs",
+		.description = "Reset all MIB counters",
+		.set = rtl8366rb_sw_reset_mibs,
+		.get = NULL,
+		.max = 1
+	}, {
+		.type = SWITCH_TYPE_INT,
+		.name = "blinkrate",
+		.description = "Get/Set LED blinking rate (0 = 43ms, 1 = 84ms,"
+		" 2 = 120ms, 3 = 170ms, 4 = 340ms, 5 = 670ms)",
+		.set = rtl8366rb_sw_set_blinkrate,
+		.get = rtl8366rb_sw_get_blinkrate,
+		.max = 5
+	},
+};
+
+static struct switch_attr rtl8366rb_port[] = {
+	{
+		.type = SWITCH_TYPE_STRING,
+		.name = "link",
+		.description = "Get port link information",
+		.max = 1,
+		.set = NULL,
+		.get = rtl8366rb_sw_get_port_link,
+	}, {
+		.type = SWITCH_TYPE_INT,
+		.name = "reset_mib",
+		.description = "Reset single port MIB counters",
+		.max = 1,
+		.set = rtl8366rb_sw_reset_port_mibs,
+		.get = NULL,
+	}, {
+		.type = SWITCH_TYPE_STRING,
+		.name = "mib",
+		.description = "Get MIB counters for port",
+		.max = 33,
+		.set = NULL,
+		.get = rtl8366rb_sw_get_port_mib,
+	}, {
+		.type = SWITCH_TYPE_INT,
+		.name = "led",
+		.description = "Get/Set port group (0 - 3) led mode (0 - 15)",
+		.max = 15,
+		.set = rtl8366rb_sw_set_port_led,
+		.get = rtl8366rb_sw_get_port_led,
+	},
+};
+
+static struct switch_attr rtl8366rb_vlan[] = {
+	{
+		.type = SWITCH_TYPE_STRING,
+		.name = "info",
+		.description = "Get vlan information",
+		.max = 1,
+		.set = NULL,
+		.get = rtl8366rb_sw_get_vlan_info,
+	},
+};
+
+/* template */
+static struct switch_dev rtl8366_switch_dev = {
+	.name = "RTL8366S",
+	.cpu_port = RTL8366_PORT_NUM_CPU,
+	.ports = RTL8366_NUM_PORTS,
+	.vlans = RTL8366_NUM_VLANS,
+	.attr_global = {
+		.attr = rtl8366rb_globals,
+		.n_attr = ARRAY_SIZE(rtl8366rb_globals),
+	},
+	.attr_port = {
+		.attr = rtl8366rb_port,
+		.n_attr = ARRAY_SIZE(rtl8366rb_port),
+	},
+	.attr_vlan = {
+		.attr = rtl8366rb_vlan,
+		.n_attr = ARRAY_SIZE(rtl8366rb_vlan),
+	},
+
+	.get_vlan_ports = rtl8366rb_sw_get_vlan_ports,
+	.set_vlan_ports = rtl8366rb_sw_set_vlan_ports,
+	.get_port_pvid = rtl8366rb_sw_get_port_pvid,
+	.set_port_pvid = rtl8366rb_sw_set_port_pvid,
+	.reset_switch = rtl8366rb_sw_reset_switch,
+};
+
+static int rtl8366rb_switch_init(struct rtl8366rb *rtl)
+{
+	struct switch_dev *dev = &rtl->dev;
+	int err;
+
+	memcpy(dev, &rtl8366_switch_dev, sizeof(struct switch_dev));
+	dev->priv = rtl;
+	dev->devname = dev_name(rtl->parent);
+
+	err = register_switch(dev, NULL);
+	if (err)
+		dev_err(rtl->parent, "switch registration failed\n");
+
+	return err;
+}
+
+static void rtl8366rb_switch_cleanup(struct rtl8366rb *rtl)
+{
+	unregister_switch(&rtl->dev);
+}
+
+static int rtl8366rb_mii_read(struct mii_bus *bus, int addr, int reg)
+{
+	struct rtl8366_smi *smi = bus->priv;
+	u32 val = 0;
+	int err;
+
+	err = rtl8366rb_read_phy_reg(smi, addr, 0, reg, &val);
+	if (err)
+		return 0xffff;
+
+	return val;
+}
+
+static int rtl8366rb_mii_write(struct mii_bus *bus, int addr, int reg, u16 val)
+{
+	struct rtl8366_smi *smi = bus->priv;
+	u32 t;
+	int err;
+
+	err = rtl8366rb_write_phy_reg(smi, addr, 0, reg, val);
+	/* flush write */
+	(void) rtl8366rb_read_phy_reg(smi, addr, 0, reg, &t);
+
+	return err;
+}
+
+static int rtl8366rb_mii_bus_match(struct mii_bus *bus)
+{
+	return (bus->read == rtl8366rb_mii_read &&
+		bus->write == rtl8366rb_mii_write);
+}
+
+static int rtl8366rb_setup(struct rtl8366rb *rtl)
+{
+	struct rtl8366_smi *smi = &rtl->smi;
+	int ret;
+
+	rtl8366rb_debugfs_init(rtl);
+
+	ret = rtl8366rb_reset_chip(smi);
+	if (ret)
+		return ret;
+
+	ret = rtl8366rb_hw_init(smi);
+	return ret;
+}
+
+static int rtl8366rb_detect(struct rtl8366_smi *smi)
+{
+	u32 chip_id = 0;
+	u32 chip_ver = 0;
+	int ret;
+
+	ret = rtl8366_smi_read_reg(smi, RTL8366S_CHIP_ID_REG, &chip_id);
+	if (ret) {
+		dev_err(smi->parent, "unable to read chip id\n");
+		return ret;
+	}
+
+	switch (chip_id) {
+	case RTL8366S_CHIP_ID_8366:
+		break;
+	default:
+		dev_err(smi->parent, "unknown chip id (%04x)\n", chip_id);
+		return -ENODEV;
+	}
+
+	ret = rtl8366_smi_read_reg(smi, RTL8366S_CHIP_VERSION_CTRL_REG,
+				   &chip_ver);
+	if (ret) {
+		dev_err(smi->parent, "unable to read chip version\n");
+		return ret;
+	}
+
+	dev_info(smi->parent, "RTL%04x ver. %u chip found\n",
+		 chip_id, chip_ver & RTL8366S_CHIP_VERSION_MASK);
+
+	return 0;
+}
+
+static struct rtl8366_smi_ops rtl8366rb_smi_ops = {
+	.detect		= rtl8366rb_detect,
+	.mii_read	= rtl8366rb_mii_read,
+	.mii_write	= rtl8366rb_mii_write,
+};
+
+static int __init rtl8366rb_probe(struct platform_device *pdev)
+{
+	static int rtl8366_smi_version_printed;
+	struct rtl8366rb_platform_data *pdata;
+	struct rtl8366rb *rtl;
+	struct rtl8366_smi *smi;
+	int err;
+
+	if (!rtl8366_smi_version_printed++)
+		printk(KERN_NOTICE RTL8366S_DRIVER_DESC
+		       " version " RTL8366S_DRIVER_VER"\n");
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data specified\n");
+		err = -EINVAL;
+		goto err_out;
+	}
+
+	rtl = kzalloc(sizeof(*rtl), GFP_KERNEL);
+	if (!rtl) {
+		dev_err(&pdev->dev, "no memory for private data\n");
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	rtl->parent = &pdev->dev;
+
+	smi = &rtl->smi;
+	smi->parent = &pdev->dev;
+	smi->gpio_sda = pdata->gpio_sda;
+	smi->gpio_sck = pdata->gpio_sck;
+	smi->ops = &rtl8366rb_smi_ops;
+
+	err = rtl8366_smi_init(smi);
+	if (err)
+		goto err_free_rtl;
+
+	platform_set_drvdata(pdev, rtl);
+
+	err = rtl8366rb_setup(rtl);
+	if (err)
+		goto err_clear_drvdata;
+
+	err = rtl8366rb_switch_init(rtl);
+	if (err)
+		goto err_clear_drvdata;
+
+	return 0;
+
+ err_clear_drvdata:
+	platform_set_drvdata(pdev, NULL);
+	rtl8366_smi_cleanup(smi);
+ err_free_rtl:
+	kfree(rtl);
+ err_out:
+	return err;
+}
+
+static int rtl8366rb_phy_config_init(struct phy_device *phydev)
+{
+	if (!rtl8366rb_mii_bus_match(phydev->bus))
+		return -EINVAL;
+
+	return 0;
+}
+
+static int rtl8366rb_phy_config_aneg(struct phy_device *phydev)
+{
+	return 0;
+}
+
+static struct phy_driver rtl8366rb_phy_driver = {
+	.phy_id		= 0x001cc960,
+	.name		= "Realtek RTL8366RB",
+	.phy_id_mask	= 0x1ffffff0,
+	.features	= PHY_GBIT_FEATURES,
+	.config_aneg	= rtl8366rb_phy_config_aneg,
+	.config_init    = rtl8366rb_phy_config_init,
+	.read_status	= genphy_read_status,
+	.driver		= {
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __devexit rtl8366rb_remove(struct platform_device *pdev)
+{
+	struct rtl8366rb *rtl = platform_get_drvdata(pdev);
+
+	if (rtl) {
+		rtl8366rb_switch_cleanup(rtl);
+		rtl8366rb_debugfs_remove(rtl);
+		platform_set_drvdata(pdev, NULL);
+		rtl8366_smi_cleanup(&rtl->smi);
+		kfree(rtl);
+	}
+
+	return 0;
+}
+
+static struct platform_driver rtl8366rb_driver = {
+	.driver = {
+		.name		= RTL8366RB_DRIVER_NAME,
+		.owner		= THIS_MODULE,
+	},
+	.probe		= rtl8366rb_probe,
+	.remove		= __devexit_p(rtl8366rb_remove),
+};
+
+static int __init rtl8366rb_module_init(void)
+{
+	int ret;
+	ret = platform_driver_register(&rtl8366rb_driver);
+	if (ret)
+		return ret;
+
+	ret = phy_driver_register(&rtl8366rb_phy_driver);
+	if (ret)
+		goto err_platform_unregister;
+
+	return 0;
+
+ err_platform_unregister:
+	platform_driver_unregister(&rtl8366rb_driver);
+	return ret;
+}
+module_init(rtl8366rb_module_init);
+
+static void __exit rtl8366rb_module_exit(void)
+{
+	phy_driver_unregister(&rtl8366rb_phy_driver);
+	platform_driver_unregister(&rtl8366rb_driver);
+}
+module_exit(rtl8366rb_module_exit);
+
+MODULE_DESCRIPTION(RTL8366S_DRIVER_DESC);
+MODULE_VERSION(RTL8366S_DRIVER_VER);
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_AUTHOR("Antti Seppälä <a.seppala@gmail.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" RTL8366RB_DRIVER_NAME);
diff --git a/target/linux/generic/files/drivers/net/phy/rtl8366s.c b/target/linux/generic/files/drivers/net/phy/rtl8366s.c
new file mode 100644
index 0000000000..da8fe556c4
--- /dev/null
+++ b/target/linux/generic/files/drivers/net/phy/rtl8366s.c
@@ -0,0 +1,1785 @@
+/*
+ * Platform driver for the Realtek RTL8366S ethernet switch
+ *
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/skbuff.h>
+#include <linux/switch.h>
+#include <linux/rtl8366s.h>
+
+#include "rtl8366_smi.h"
+
+#ifdef CONFIG_RTL8366S_PHY_DEBUG_FS
+#include <linux/debugfs.h>
+#endif
+
+#define RTL8366S_DRIVER_DESC	"Realtek RTL8366S ethernet switch driver"
+#define RTL8366S_DRIVER_VER	"0.2.2"
+
+#define RTL8366S_PHY_NO_MAX                 4
+#define RTL8366S_PHY_PAGE_MAX               7
+#define RTL8366S_PHY_ADDR_MAX               31
+
+#define RTL8366_CHIP_GLOBAL_CTRL_REG        0x0000
+#define RTL8366_CHIP_CTRL_VLAN              (1 << 13)
+
+/* Switch Global Configuration register */
+#define RTL8366_SGCR			0x0000
+#define RTL8366_SGCR_EN_BC_STORM_CTRL	BIT(0)
+#define RTL8366_SGCR_MAX_LENGTH(_x)	(_x << 4)
+#define RTL8366_SGCR_MAX_LENGTH_MASK	RTL8366_SGCR_MAX_LENGTH(0x3)
+#define RTL8366_SGCR_MAX_LENGTH_1522	RTL8366_SGCR_MAX_LENGTH(0x0)
+#define RTL8366_SGCR_MAX_LENGTH_1536	RTL8366_SGCR_MAX_LENGTH(0x1)
+#define RTL8366_SGCR_MAX_LENGTH_1552	RTL8366_SGCR_MAX_LENGTH(0x2)
+#define RTL8366_SGCR_MAX_LENGTH_16000	RTL8366_SGCR_MAX_LENGTH(0x3)
+
+/* Port Enable Control register */
+#define RTL8366_PECR			0x0001
+
+/* Switch Security Control registers */
+#define RTL8366_SSCR0			0x0002
+#define RTL8366_SSCR1			0x0003
+#define RTL8366_SSCR2			0x0004
+#define RTL8366_SSCR2_DROP_UNKNOWN_DA	BIT(0)
+
+#define RTL8366_RESET_CTRL_REG              0x0100
+#define RTL8366_CHIP_CTRL_RESET_HW          1
+#define RTL8366_CHIP_CTRL_RESET_SW          (1 << 1)
+
+#define RTL8366S_CHIP_VERSION_CTRL_REG      0x0104
+#define RTL8366S_CHIP_VERSION_MASK          0xf
+#define RTL8366S_CHIP_ID_REG                0x0105
+#define RTL8366S_CHIP_ID_8366               0x8366
+
+/* PHY registers control */
+#define RTL8366S_PHY_ACCESS_CTRL_REG        0x8028
+#define RTL8366S_PHY_ACCESS_DATA_REG        0x8029
+
+#define RTL8366S_PHY_CTRL_READ              1
+#define RTL8366S_PHY_CTRL_WRITE             0
+
+#define RTL8366S_PHY_REG_MASK               0x1f
+#define RTL8366S_PHY_PAGE_OFFSET            5
+#define RTL8366S_PHY_PAGE_MASK              (0x7 << 5)
+#define RTL8366S_PHY_NO_OFFSET              9
+#define RTL8366S_PHY_NO_MASK                (0x1f << 9)
+
+/* LED control registers */
+#define RTL8366_LED_BLINKRATE_REG           0x0420
+#define RTL8366_LED_BLINKRATE_BIT           0
+#define RTL8366_LED_BLINKRATE_MASK          0x0007
+
+#define RTL8366_LED_CTRL_REG                0x0421
+#define RTL8366_LED_0_1_CTRL_REG            0x0422
+#define RTL8366_LED_2_3_CTRL_REG            0x0423
+
+#define RTL8366S_MIB_COUNT                  33
+#define RTL8366S_GLOBAL_MIB_COUNT           1
+#define RTL8366S_MIB_COUNTER_PORT_OFFSET    0x0040
+#define RTL8366S_MIB_COUNTER_BASE           0x1000
+#define RTL8366S_MIB_COUNTER_PORT_OFFSET2   0x0008
+#define RTL8366S_MIB_COUNTER_BASE2          0x1180
+#define RTL8366S_MIB_CTRL_REG               0x11F0
+#define RTL8366S_MIB_CTRL_USER_MASK         0x01FF
+#define RTL8366S_MIB_CTRL_BUSY_MASK         0x0001
+#define RTL8366S_MIB_CTRL_RESET_MASK        0x0002
+
+#define RTL8366S_MIB_CTRL_GLOBAL_RESET_MASK 0x0004
+#define RTL8366S_MIB_CTRL_PORT_RESET_BIT    0x0003
+#define RTL8366S_MIB_CTRL_PORT_RESET_MASK   0x01FC
+
+
+#define RTL8366S_PORT_VLAN_CTRL_BASE        0x0058
+#define RTL8366S_PORT_VLAN_CTRL_REG(_p)  \
+		(RTL8366S_PORT_VLAN_CTRL_BASE + (_p) / 4)
+#define RTL8366S_PORT_VLAN_CTRL_MASK	    0xf
+#define RTL8366S_PORT_VLAN_CTRL_SHIFT(_p)   (4 * ((_p) % 4))
+
+
+#define RTL8366S_VLAN_TABLE_READ_BASE       0x018B
+#define RTL8366S_VLAN_TABLE_WRITE_BASE      0x0185
+
+#define RTL8366S_VLAN_TB_CTRL_REG           0x010F
+
+#define RTL8366S_TABLE_ACCESS_CTRL_REG      0x0180
+#define RTL8366S_TABLE_VLAN_READ_CTRL       0x0E01
+#define RTL8366S_TABLE_VLAN_WRITE_CTRL      0x0F01
+
+#define RTL8366S_VLAN_MEMCONF_BASE          0x0016
+
+
+#define RTL8366S_PORT_LINK_STATUS_BASE      0x0060
+#define RTL8366S_PORT_STATUS_SPEED_MASK     0x0003
+#define RTL8366S_PORT_STATUS_DUPLEX_MASK    0x0004
+#define RTL8366S_PORT_STATUS_LINK_MASK      0x0010
+#define RTL8366S_PORT_STATUS_TXPAUSE_MASK   0x0020
+#define RTL8366S_PORT_STATUS_RXPAUSE_MASK   0x0040
+#define RTL8366S_PORT_STATUS_AN_MASK        0x0080
+
+
+#define RTL8366_PORT_NUM_CPU                5
+#define RTL8366_NUM_PORTS                   6
+#define RTL8366_NUM_VLANS                   16
+#define RTL8366_NUM_LEDGROUPS               4
+#define RTL8366_NUM_VIDS                    4096
+#define RTL8366S_PRIORITYMAX                7
+#define RTL8366S_FIDMAX	                    7
+
+
+#define RTL8366_PORT_1                      (1 << 0) /* In userspace port 0 */
+#define RTL8366_PORT_2                      (1 << 1) /* In userspace port 1 */
+#define RTL8366_PORT_3                      (1 << 2) /* In userspace port 2 */
+#define RTL8366_PORT_4                      (1 << 3) /* In userspace port 3 */
+
+#define RTL8366_PORT_UNKNOWN                (1 << 4) /* No known connection */
+#define RTL8366_PORT_CPU                    (1 << 5) /* CPU port */
+
+#define RTL8366_PORT_ALL                    (RTL8366_PORT_1 |       \
+					     RTL8366_PORT_2 |       \
+					     RTL8366_PORT_3 |       \
+					     RTL8366_PORT_4 |       \
+					     RTL8366_PORT_UNKNOWN | \
+					     RTL8366_PORT_CPU)
+
+#define RTL8366_PORT_ALL_BUT_CPU            (RTL8366_PORT_1 |       \
+					     RTL8366_PORT_2 |       \
+					     RTL8366_PORT_3 |       \
+					     RTL8366_PORT_4 |       \
+					     RTL8366_PORT_UNKNOWN)
+
+#define RTL8366_PORT_ALL_EXTERNAL           (RTL8366_PORT_1 |       \
+					     RTL8366_PORT_2 |       \
+					     RTL8366_PORT_3 |       \
+					     RTL8366_PORT_4)
+
+#define RTL8366_PORT_ALL_INTERNAL           (RTL8366_PORT_UNKNOWN | \
+					     RTL8366_PORT_CPU)
+
+struct rtl8366s {
+	struct device		*parent;
+	struct rtl8366_smi	smi;
+	struct switch_dev	dev;
+	char			buf[4096];
+#ifdef CONFIG_RTL8366S_PHY_DEBUG_FS
+	struct dentry           *debugfs_root;
+#endif
+};
+
+struct rtl8366s_vlan_mc {
+	u16 	reserved2:1;
+	u16 	priority:3;
+	u16 	vid:12;
+
+	u16 	reserved1:1;
+	u16 	fid:3;
+	u16 	untag:6;
+	u16 	member:6;
+};
+
+struct rtl8366s_vlan_4k {
+	u16 	reserved1:4;
+	u16 	vid:12;
+
+	u16 	reserved2:1;
+	u16 	fid:3;
+	u16 	untag:6;
+	u16 	member:6;
+};
+
+#ifdef CONFIG_RTL8366S_PHY_DEBUG_FS
+u16 g_dbg_reg;
+#endif
+
+struct mib_counter {
+	unsigned	base;
+	unsigned	offset;
+	unsigned	length;
+	const char	*name;
+};
+
+static struct mib_counter rtl8366s_mib_counters[RTL8366S_MIB_COUNT] = {
+	{ 0,  0, 4, "IfInOctets"				},
+	{ 0,  4, 4, "EtherStatsOctets"				},
+	{ 0,  8, 2, "EtherStatsUnderSizePkts"			},
+	{ 0, 10, 2, "EtherFragments"				},
+	{ 0, 12, 2, "EtherStatsPkts64Octets"			},
+	{ 0, 14, 2, "EtherStatsPkts65to127Octets"		},
+	{ 0, 16, 2, "EtherStatsPkts128to255Octets"		},
+	{ 0, 18, 2, "EtherStatsPkts256to511Octets"		},
+	{ 0, 20, 2, "EtherStatsPkts512to1023Octets"		},
+	{ 0, 22, 2, "EtherStatsPkts1024to1518Octets"		},
+	{ 0, 24, 2, "EtherOversizeStats"			},
+	{ 0, 26, 2, "EtherStatsJabbers"				},
+	{ 0, 28, 2, "IfInUcastPkts"				},
+	{ 0, 30, 2, "EtherStatsMulticastPkts"			},
+	{ 0, 32, 2, "EtherStatsBroadcastPkts"			},
+	{ 0, 34, 2, "EtherStatsDropEvents"			},
+	{ 0, 36, 2, "Dot3StatsFCSErrors"			},
+	{ 0, 38, 2, "Dot3StatsSymbolErrors"			},
+	{ 0, 40, 2, "Dot3InPauseFrames"				},
+	{ 0, 42, 2, "Dot3ControlInUnknownOpcodes"		},
+	{ 0, 44, 4, "IfOutOctets"				},
+	{ 0, 48, 2, "Dot3StatsSingleCollisionFrames"		},
+	{ 0, 50, 2, "Dot3StatMultipleCollisionFrames"		},
+	{ 0, 52, 2, "Dot3sDeferredTransmissions"		},
+	{ 0, 54, 2, "Dot3StatsLateCollisions"			},
+	{ 0, 56, 2, "EtherStatsCollisions"			},
+	{ 0, 58, 2, "Dot3StatsExcessiveCollisions"		},
+	{ 0, 60, 2, "Dot3OutPauseFrames"			},
+	{ 0, 62, 2, "Dot1dBasePortDelayExceededDiscards"	},
+
+	/*
+	 * The following counters are accessible at a different
+	 * base address.
+	 */
+	{ 1,  0, 2, "Dot1dTpPortInDiscards"			},
+	{ 1,  2, 2, "IfOutUcastPkts"				},
+	{ 1,  4, 2, "IfOutMulticastPkts"			},
+	{ 1,  6, 2, "IfOutBroadcastPkts"			},
+};
+
+#define REG_WR(_smi, _reg, _val)					\
+	do {								\
+		err = rtl8366_smi_write_reg(_smi, _reg, _val);		\
+		if (err)						\
+			return err;					\
+	} while (0)
+
+#define REG_RMW(_smi, _reg, _mask, _val)				\
+	do {								\
+		err = rtl8366_smi_rmwr(_smi, _reg, _mask, _val);	\
+		if (err)						\
+			return err;					\
+	} while (0)
+
+static inline struct rtl8366s *smi_to_rtl8366s(struct rtl8366_smi *smi)
+{
+	return container_of(smi, struct rtl8366s, smi);
+}
+
+static inline struct rtl8366s *sw_to_rtl8366s(struct switch_dev *sw)
+{
+	return container_of(sw, struct rtl8366s, dev);
+}
+
+static inline struct rtl8366_smi *sw_to_rtl8366_smi(struct switch_dev *sw)
+{
+	struct rtl8366s *rtl = sw_to_rtl8366s(sw);
+	return &rtl->smi;
+}
+
+static int rtl8366s_reset_chip(struct rtl8366_smi *smi)
+{
+	int timeout = 10;
+	u32 data;
+
+	rtl8366_smi_write_reg(smi, RTL8366_RESET_CTRL_REG,
+			      RTL8366_CHIP_CTRL_RESET_HW);
+	do {
+		msleep(1);
+		if (rtl8366_smi_read_reg(smi, RTL8366_RESET_CTRL_REG, &data))
+			return -EIO;
+
+		if (!(data & RTL8366_CHIP_CTRL_RESET_HW))
+			break;
+	} while (--timeout);
+
+	if (!timeout) {
+		printk("Timeout waiting for the switch to reset\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int rtl8366s_hw_init(struct rtl8366_smi *smi)
+{
+	int err;
+
+	/* set maximum packet length to 1536 bytes */
+	REG_RMW(smi, RTL8366_SGCR, RTL8366_SGCR_MAX_LENGTH_MASK,
+		RTL8366_SGCR_MAX_LENGTH_1536);
+
+	/* enable all ports */
+	REG_WR(smi, RTL8366_PECR, 0);
+
+	/* disable learning for all ports */
+	REG_WR(smi, RTL8366_SSCR0, RTL8366_PORT_ALL);
+
+	/* disable auto ageing for all ports */
+	REG_WR(smi, RTL8366_SSCR1, RTL8366_PORT_ALL);
+
+	/* don't drop packets whose DA has not been learned */
+	REG_RMW(smi, RTL8366_SSCR2, RTL8366_SSCR2_DROP_UNKNOWN_DA, 0);
+
+	return 0;
+}
+
+static int rtl8366s_read_phy_reg(struct rtl8366_smi *smi,
+				 u32 phy_no, u32 page, u32 addr, u32 *data)
+{
+	u32 reg;
+	int ret;
+
+	if (phy_no > RTL8366S_PHY_NO_MAX)
+		return -EINVAL;
+
+	if (page > RTL8366S_PHY_PAGE_MAX)
+		return -EINVAL;
+
+	if (addr > RTL8366S_PHY_ADDR_MAX)
+		return -EINVAL;
+
+	ret = rtl8366_smi_write_reg(smi, RTL8366S_PHY_ACCESS_CTRL_REG,
+				    RTL8366S_PHY_CTRL_READ);
+	if (ret)
+		return ret;
+
+	reg = 0x8000 | (1 << (phy_no + RTL8366S_PHY_NO_OFFSET)) |
+	      ((page << RTL8366S_PHY_PAGE_OFFSET) & RTL8366S_PHY_PAGE_MASK) |
+	      (addr & RTL8366S_PHY_REG_MASK);
+
+	ret = rtl8366_smi_write_reg(smi, reg, 0);
+	if (ret)
+		return ret;
+
+	ret = rtl8366_smi_read_reg(smi, RTL8366S_PHY_ACCESS_DATA_REG, data);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int rtl8366s_write_phy_reg(struct rtl8366_smi *smi,
+				  u32 phy_no, u32 page, u32 addr, u32 data)
+{
+	u32 reg;
+	int ret;
+
+	if (phy_no > RTL8366S_PHY_NO_MAX)
+		return -EINVAL;
+
+	if (page > RTL8366S_PHY_PAGE_MAX)
+		return -EINVAL;
+
+	if (addr > RTL8366S_PHY_ADDR_MAX)
+		return -EINVAL;
+
+	ret = rtl8366_smi_write_reg(smi, RTL8366S_PHY_ACCESS_CTRL_REG,
+				    RTL8366S_PHY_CTRL_WRITE);
+	if (ret)
+		return ret;
+
+	reg = 0x8000 | (1 << (phy_no + RTL8366S_PHY_NO_OFFSET)) |
+	      ((page << RTL8366S_PHY_PAGE_OFFSET) & RTL8366S_PHY_PAGE_MASK) |
+	      (addr & RTL8366S_PHY_REG_MASK);
+
+	ret = rtl8366_smi_write_reg(smi, reg, data);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int rtl8366_get_mib_counter(struct rtl8366_smi *smi, int counter,
+				   int port, unsigned long long *val)
+{
+	int i;
+	int err;
+	u32 addr, data;
+	u64 mibvalue;
+
+	if (port > RTL8366_NUM_PORTS || counter >= RTL8366S_MIB_COUNT)
+		return -EINVAL;
+
+	switch (rtl8366s_mib_counters[counter].base) {
+	case 0:
+		addr = RTL8366S_MIB_COUNTER_BASE +
+		       RTL8366S_MIB_COUNTER_PORT_OFFSET * port;
+		break;
+
+	case 1:
+		addr = RTL8366S_MIB_COUNTER_BASE2 +
+			RTL8366S_MIB_COUNTER_PORT_OFFSET2 * port;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	addr += rtl8366s_mib_counters[counter].offset;
+
+	/*
+	 * Writing access counter address first
+	 * then ASIC will prepare 64bits counter wait for being retrived
+	 */
+	data = 0; /* writing data will be discard by ASIC */
+	err = rtl8366_smi_write_reg(smi, addr, data);
+	if (err)
+		return err;
+
+	/* read MIB control register */
+	err =  rtl8366_smi_read_reg(smi, RTL8366S_MIB_CTRL_REG, &data);
+	if (err)
+		return err;
+
+	if (data & RTL8366S_MIB_CTRL_BUSY_MASK)
+		return -EBUSY;
+
+	if (data & RTL8366S_MIB_CTRL_RESET_MASK)
+		return -EIO;
+
+	mibvalue = 0;
+	for (i = rtl8366s_mib_counters[counter].length; i > 0; i--) {
+		err = rtl8366_smi_read_reg(smi, addr + (i - 1), &data);
+		if (err)
+			return err;
+
+		mibvalue = (mibvalue << 16) | (data & 0xFFFF);
+	}
+
+	*val = mibvalue;
+	return 0;
+}
+
+static int rtl8366s_get_vlan_4k(struct rtl8366_smi *smi, u32 vid,
+				struct rtl8366_vlan_4k *vlan4k)
+{
+	struct rtl8366s_vlan_4k vlan4k_priv;
+	int err;
+	u32 data;
+	u16 *tableaddr;
+
+	memset(vlan4k, '\0', sizeof(struct rtl8366_vlan_4k));
+	vlan4k_priv.vid = vid;
+
+	if (vid >= RTL8366_NUM_VIDS)
+		return -EINVAL;
+
+	tableaddr = (u16 *)&vlan4k_priv;
+
+	/* write VID */
+	data = *tableaddr;
+	err = rtl8366_smi_write_reg(smi, RTL8366S_VLAN_TABLE_WRITE_BASE, data);
+	if (err)
+		return err;
+
+	/* write table access control word */
+	err = rtl8366_smi_write_reg(smi, RTL8366S_TABLE_ACCESS_CTRL_REG,
+				    RTL8366S_TABLE_VLAN_READ_CTRL);
+	if (err)
+		return err;
+
+	err = rtl8366_smi_read_reg(smi, RTL8366S_VLAN_TABLE_READ_BASE, &data);
+	if (err)
+		return err;
+
+	*tableaddr = data;
+	tableaddr++;
+
+	err = rtl8366_smi_read_reg(smi, RTL8366S_VLAN_TABLE_READ_BASE + 1,
+				   &data);
+	if (err)
+		return err;
+
+	*tableaddr = data;
+
+	vlan4k->vid = vid;
+	vlan4k->untag = vlan4k_priv.untag;
+	vlan4k->member = vlan4k_priv.member;
+	vlan4k->fid = vlan4k_priv.fid;
+
+	return 0;
+}
+
+static int rtl8366s_set_vlan_4k(struct rtl8366_smi *smi,
+				const struct rtl8366_vlan_4k *vlan4k)
+{
+	struct rtl8366s_vlan_4k vlan4k_priv;
+	int err;
+	u32 data;
+	u16 *tableaddr;
+
+	if (vlan4k->vid >= RTL8366_NUM_VIDS ||
+	    vlan4k->member > RTL8366_PORT_ALL ||
+	    vlan4k->untag > RTL8366_PORT_ALL ||
+	    vlan4k->fid > RTL8366S_FIDMAX)
+		return -EINVAL;
+
+	vlan4k_priv.vid = vlan4k->vid;
+	vlan4k_priv.untag = vlan4k->untag;
+	vlan4k_priv.member = vlan4k->member;
+	vlan4k_priv.fid = vlan4k->fid;
+
+	tableaddr = (u16 *)&vlan4k_priv;
+
+	data = *tableaddr;
+
+	err = rtl8366_smi_write_reg(smi, RTL8366S_VLAN_TABLE_WRITE_BASE, data);
+	if (err)
+		return err;
+
+	tableaddr++;
+
+	data = *tableaddr;
+
+	err = rtl8366_smi_write_reg(smi, RTL8366S_VLAN_TABLE_WRITE_BASE + 1,
+				    data);
+	if (err)
+		return err;
+
+	/* write table access control word */
+	err = rtl8366_smi_write_reg(smi, RTL8366S_TABLE_ACCESS_CTRL_REG,
+				    RTL8366S_TABLE_VLAN_WRITE_CTRL);
+
+	return err;
+}
+
+static int rtl8366s_get_vlan_mc(struct rtl8366_smi *smi, u32 index,
+				struct rtl8366_vlan_mc *vlanmc)
+{
+	struct rtl8366s_vlan_mc vlanmc_priv;
+	int err;
+	u32 addr;
+	u32 data;
+	u16 *tableaddr;
+
+	memset(vlanmc, '\0', sizeof(struct rtl8366_vlan_mc));
+
+	if (index >= RTL8366_NUM_VLANS)
+		return -EINVAL;
+
+	tableaddr = (u16 *)&vlanmc_priv;
+
+	addr = RTL8366S_VLAN_MEMCONF_BASE + (index << 1);
+	err = rtl8366_smi_read_reg(smi, addr, &data);
+	if (err)
+		return err;
+
+	*tableaddr = data;
+	tableaddr++;
+
+	addr = RTL8366S_VLAN_MEMCONF_BASE + 1 + (index << 1);
+	err = rtl8366_smi_read_reg(smi, addr, &data);
+	if (err)
+		return err;
+
+	*tableaddr = data;
+
+	vlanmc->vid = vlanmc_priv.vid;
+	vlanmc->priority = vlanmc_priv.priority;
+	vlanmc->untag = vlanmc_priv.untag;
+	vlanmc->member = vlanmc_priv.member;
+	vlanmc->fid = vlanmc_priv.fid;
+
+	return 0;
+}
+
+static int rtl8366s_set_vlan_mc(struct rtl8366_smi *smi, u32 index,
+				const struct rtl8366_vlan_mc *vlanmc)
+{
+	struct rtl8366s_vlan_mc vlanmc_priv;
+	int err;
+	u32 addr;
+	u32 data;
+	u16 *tableaddr;
+
+	if (index >= RTL8366_NUM_VLANS ||
+	    vlanmc->vid >= RTL8366_NUM_VIDS ||
+	    vlanmc->priority > RTL8366S_PRIORITYMAX ||
+	    vlanmc->member > RTL8366_PORT_ALL ||
+	    vlanmc->untag > RTL8366_PORT_ALL ||
+	    vlanmc->fid > RTL8366S_FIDMAX)
+		return -EINVAL;
+
+	vlanmc_priv.vid = vlanmc->vid;
+	vlanmc_priv.priority = vlanmc->priority;
+	vlanmc_priv.untag = vlanmc->untag;
+	vlanmc_priv.member = vlanmc->member;
+	vlanmc_priv.fid = vlanmc->fid;
+
+	addr = RTL8366S_VLAN_MEMCONF_BASE + (index << 1);
+
+	tableaddr = (u16 *)&vlanmc_priv;
+	data = *tableaddr;
+
+	err = rtl8366_smi_write_reg(smi, addr, data);
+	if (err)
+		return err;
+
+	addr = RTL8366S_VLAN_MEMCONF_BASE + 1 + (index << 1);
+
+	tableaddr++;
+	data = *tableaddr;
+
+	err = rtl8366_smi_write_reg(smi, addr, data);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int rtl8366s_get_mc_index(struct rtl8366_smi *smi, int port, int *val)
+{
+	u32 data;
+	int err;
+
+	if (port >= RTL8366_NUM_PORTS)
+		return -EINVAL;
+
+	err = rtl8366_smi_read_reg(smi, RTL8366S_PORT_VLAN_CTRL_REG(port),
+				   &data);
+	if (err)
+		return err;
+
+	*val = (data >> RTL8366S_PORT_VLAN_CTRL_SHIFT(port)) &
+	       RTL8366S_PORT_VLAN_CTRL_MASK;
+
+	return 0;
+}
+
+static int rtl8366s_set_mc_index(struct rtl8366_smi *smi, int port, int index)
+{
+	if (port >= RTL8366_NUM_PORTS || index >= RTL8366_NUM_VLANS)
+		return -EINVAL;
+
+	return rtl8366_smi_rmwr(smi, RTL8366S_PORT_VLAN_CTRL_REG(port),
+				RTL8366S_PORT_VLAN_CTRL_MASK <<
+					RTL8366S_PORT_VLAN_CTRL_SHIFT(port),
+				(index & RTL8366S_PORT_VLAN_CTRL_MASK) <<
+					RTL8366S_PORT_VLAN_CTRL_SHIFT(port));
+}
+
+static int rtl8366s_set_vlan(struct rtl8366_smi *smi, int vid, u32 member,
+			     u32 untag, u32 fid)
+{
+	struct rtl8366_vlan_4k vlan4k;
+	int err;
+	int i;
+
+	/* Update the 4K table */
+	err = rtl8366s_get_vlan_4k(smi, vid, &vlan4k);
+	if (err)
+		return err;
+
+	vlan4k.member = member;
+	vlan4k.untag = untag;
+	vlan4k.fid = fid;
+	err = rtl8366s_set_vlan_4k(smi, &vlan4k);
+	if (err)
+		return err;
+
+	/* Try to find an existing MC entry for this VID */
+	for (i = 0; i < RTL8366_NUM_VLANS; i++) {
+		struct rtl8366_vlan_mc vlanmc;
+
+		err = rtl8366s_get_vlan_mc(smi, i, &vlanmc);
+		if (err)
+			return err;
+
+		if (vid == vlanmc.vid) {
+			/* update the MC entry */
+			vlanmc.member = member;
+			vlanmc.untag = untag;
+			vlanmc.fid = fid;
+
+			err = rtl8366s_set_vlan_mc(smi, i, &vlanmc);
+			break;
+		}
+	}
+
+	return err;
+}
+
+static int rtl8366s_get_pvid(struct rtl8366_smi *smi, int port, int *val)
+{
+	struct rtl8366_vlan_mc vlanmc;
+	int err;
+	int index;
+
+	err = rtl8366s_get_mc_index(smi, port, &index);
+	if (err)
+		return err;
+
+	err = rtl8366s_get_vlan_mc(smi, index, &vlanmc);
+	if (err)
+		return err;
+
+	*val = vlanmc.vid;
+	return 0;
+}
+
+static int rtl8366s_mc_is_used(struct rtl8366_smi *smi, int mc_index,
+			       int *used)
+{
+	int err;
+	int i;
+
+	*used = 0;
+	for (i = 0; i < RTL8366_NUM_PORTS; i++) {
+		int index = 0;
+
+		err = rtl8366s_get_mc_index(smi, i, &index);
+		if (err)
+			return err;
+
+		if (mc_index == index) {
+			*used = 1;
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static int rtl8366s_set_pvid(struct rtl8366_smi *smi, unsigned port,
+			     unsigned vid)
+{
+	struct rtl8366_vlan_mc vlanmc;
+	struct rtl8366_vlan_4k vlan4k;
+	int err;
+	int i;
+
+	/* Try to find an existing MC entry for this VID */
+	for (i = 0; i < RTL8366_NUM_VLANS; i++) {
+		err = rtl8366s_get_vlan_mc(smi, i, &vlanmc);
+		if (err)
+			return err;
+
+		if (vid == vlanmc.vid) {
+			err = rtl8366s_set_vlan_mc(smi, i, &vlanmc);
+			if (err)
+				return err;
+
+			err = rtl8366s_set_mc_index(smi, port, i);
+			return err;
+		}
+	}
+
+	/* We have no MC entry for this VID, try to find an empty one */
+	for (i = 0; i < RTL8366_NUM_VLANS; i++) {
+		err = rtl8366s_get_vlan_mc(smi, i, &vlanmc);
+		if (err)
+			return err;
+
+		if (vlanmc.vid == 0 && vlanmc.member == 0) {
+			/* Update the entry from the 4K table */
+			err = rtl8366s_get_vlan_4k(smi, vid, &vlan4k);
+			if (err)
+				return err;
+
+			vlanmc.vid = vid;
+			vlanmc.member = vlan4k.member;
+			vlanmc.untag = vlan4k.untag;
+			vlanmc.fid = vlan4k.fid;
+			err = rtl8366s_set_vlan_mc(smi, i, &vlanmc);
+			if (err)
+				return err;
+
+			err = rtl8366s_set_mc_index(smi, port, i);
+			return err;
+		}
+	}
+
+	/* MC table is full, try to find an unused entry and replace it */
+	for (i = 0; i < RTL8366_NUM_VLANS; i++) {
+		int used;
+
+		err = rtl8366s_mc_is_used(smi, i, &used);
+		if (err)
+			return err;
+
+		if (!used) {
+			/* Update the entry from the 4K table */
+			err = rtl8366s_get_vlan_4k(smi, vid, &vlan4k);
+			if (err)
+				return err;
+
+			vlanmc.vid = vid;
+			vlanmc.member = vlan4k.member;
+			vlanmc.untag = vlan4k.untag;
+			vlanmc.fid = vlan4k.fid;
+			err = rtl8366s_set_vlan_mc(smi, i, &vlanmc);
+			if (err)
+				return err;
+
+			err = rtl8366s_set_mc_index(smi, port, i);
+			return err;
+		}
+	}
+
+	dev_err(smi->parent,
+		"all VLAN member configurations are in use\n");
+
+	return -ENOSPC;
+}
+
+static int rtl8366s_vlan_set_vlan(struct rtl8366_smi *smi, int enable)
+{
+	return rtl8366_smi_rmwr(smi, RTL8366_CHIP_GLOBAL_CTRL_REG,
+				RTL8366_CHIP_CTRL_VLAN,
+				(enable) ? RTL8366_CHIP_CTRL_VLAN : 0);
+}
+
+static int rtl8366s_vlan_set_4ktable(struct rtl8366_smi *smi, int enable)
+{
+	return rtl8366_smi_rmwr(smi, RTL8366S_VLAN_TB_CTRL_REG,
+				1, (enable) ? 1 : 0);
+}
+
+static int rtl8366s_reset_vlan(struct rtl8366_smi *smi)
+{
+	struct rtl8366_vlan_mc vlanmc;
+	int err;
+	int i;
+
+	/* clear VLAN member configurations */
+	vlanmc.vid = 0;
+	vlanmc.priority = 0;
+	vlanmc.member = 0;
+	vlanmc.untag = 0;
+	vlanmc.fid = 0;
+	for (i = 0; i < RTL8366_NUM_VLANS; i++) {
+		err = rtl8366s_set_vlan_mc(smi, i, &vlanmc);
+		if (err)
+			return err;
+	}
+
+	for (i = 0; i < RTL8366_NUM_PORTS; i++) {
+		if (i == RTL8366_PORT_CPU)
+			continue;
+
+		err = rtl8366s_set_vlan(smi, (i + 1),
+					 (1 << i) | RTL8366_PORT_CPU,
+					 (1 << i) | RTL8366_PORT_CPU,
+					 0);
+		if (err)
+			return err;
+
+		err = rtl8366s_set_pvid(smi, i, (i + 1));
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_RTL8366S_PHY_DEBUG_FS
+static int rtl8366s_debugfs_open(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+	return 0;
+}
+
+static ssize_t rtl8366s_read_debugfs_mibs(struct file *file,
+					  char __user *user_buf,
+					  size_t count, loff_t *ppos)
+{
+	struct rtl8366s *rtl = (struct rtl8366s *)file->private_data;
+	struct rtl8366_smi *smi = &rtl->smi;
+	int i, j, len = 0;
+	char *buf = rtl->buf;
+
+	len += snprintf(buf + len, sizeof(rtl->buf) - len,
+			"%-36s %12s %12s %12s %12s %12s %12s\n",
+			"Counter",
+			"Port 0", "Port 1", "Port 2",
+			"Port 3", "Port 4", "Port 5");
+
+	for (i = 0; i < ARRAY_SIZE(rtl8366s_mib_counters); ++i) {
+		len += snprintf(buf + len, sizeof(rtl->buf) - len, "%-36s ",
+				rtl8366s_mib_counters[i].name);
+		for (j = 0; j < RTL8366_NUM_PORTS; ++j) {
+			unsigned long long counter = 0;
+
+			if (!rtl8366_get_mib_counter(smi, i, j, &counter))
+				len += snprintf(buf + len,
+						sizeof(rtl->buf) - len,
+						"%12llu ", counter);
+			else
+				len += snprintf(buf + len,
+						sizeof(rtl->buf) - len,
+						"%12s ", "error");
+		}
+		len += snprintf(buf + len, sizeof(rtl->buf) - len, "\n");
+	}
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t rtl8366s_read_debugfs_vlan_mc(struct file *file,
+					     char __user *user_buf,
+					     size_t count, loff_t *ppos)
+{
+	struct rtl8366s *rtl = (struct rtl8366s *)file->private_data;
+	struct rtl8366_smi *smi = &rtl->smi;
+	int i, len = 0;
+	char *buf = rtl->buf;
+
+	len += snprintf(buf + len, sizeof(rtl->buf) - len,
+			"%2s %6s %4s %6s %6s %3s\n",
+			"id", "vid","prio", "member", "untag", "fid");
+
+	for (i = 0; i < RTL8366_NUM_VLANS; ++i) {
+		struct rtl8366_vlan_mc vlanmc;
+
+		rtl8366s_get_vlan_mc(smi, i, &vlanmc);
+
+		len += snprintf(buf + len, sizeof(rtl->buf) - len,
+				"%2d %6d %4d 0x%04x 0x%04x %3d\n",
+				i, vlanmc.vid, vlanmc.priority,
+				vlanmc.member, vlanmc.untag, vlanmc.fid);
+	}
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t rtl8366s_read_debugfs_reg(struct file *file,
+					 char __user *user_buf,
+					 size_t count, loff_t *ppos)
+{
+	struct rtl8366s *rtl = (struct rtl8366s *)file->private_data;
+	struct rtl8366_smi *smi = &rtl->smi;
+	u32 t, reg = g_dbg_reg;
+	int err, len = 0;
+	char *buf = rtl->buf;
+
+	memset(buf, '\0', sizeof(rtl->buf));
+
+	err = rtl8366_smi_read_reg(smi, reg, &t);
+	if (err) {
+		len += snprintf(buf, sizeof(rtl->buf),
+				"Read failed (reg: 0x%04x)\n", reg);
+		return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+	}
+
+	len += snprintf(buf, sizeof(rtl->buf), "reg = 0x%04x, val = 0x%04x\n",
+			reg, t);
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t rtl8366s_write_debugfs_reg(struct file *file,
+					  const char __user *user_buf,
+					  size_t count, loff_t *ppos)
+{
+	struct rtl8366s *rtl = (struct rtl8366s *)file->private_data;
+	struct rtl8366_smi *smi = &rtl->smi;
+	unsigned long data;
+	u32 reg = g_dbg_reg;
+	int err;
+	size_t len;
+	char *buf = rtl->buf;
+
+	len = min(count, sizeof(rtl->buf) - 1);
+	if (copy_from_user(buf, user_buf, len)) {
+		dev_err(rtl->parent, "copy from user failed\n");
+		return -EFAULT;
+	}
+
+	buf[len] = '\0';
+	if (len > 0 && buf[len - 1] == '\n')
+		buf[len - 1] = '\0';
+
+
+	if (strict_strtoul(buf, 16, &data)) {
+		dev_err(rtl->parent, "Invalid reg value %s\n", buf);
+	} else {
+		err = rtl8366_smi_write_reg(smi, reg, data);
+		if (err) {
+			dev_err(rtl->parent,
+				"writing reg 0x%04x val 0x%04lx failed\n",
+				reg, data);
+		}
+	}
+
+	return count;
+}
+
+static const struct file_operations fops_rtl8366s_regs = {
+	.read = rtl8366s_read_debugfs_reg,
+	.write = rtl8366s_write_debugfs_reg,
+	.open = rtl8366s_debugfs_open,
+	.owner = THIS_MODULE
+};
+
+static const struct file_operations fops_rtl8366s_vlan_mc = {
+	.read = rtl8366s_read_debugfs_vlan_mc,
+	.open = rtl8366s_debugfs_open,
+	.owner = THIS_MODULE
+};
+
+static const struct file_operations fops_rtl8366s_mibs = {
+	.read = rtl8366s_read_debugfs_mibs,
+	.open = rtl8366s_debugfs_open,
+	.owner = THIS_MODULE
+};
+
+static void rtl8366s_debugfs_init(struct rtl8366s *rtl)
+{
+	struct dentry *node;
+	struct dentry *root;
+
+	if (!rtl->debugfs_root)
+		rtl->debugfs_root = debugfs_create_dir("rtl8366s", NULL);
+
+	if (!rtl->debugfs_root) {
+		dev_err(rtl->parent, "Unable to create debugfs dir\n");
+		return;
+	}
+	root = rtl->debugfs_root;
+
+	node = debugfs_create_x16("reg", S_IRUGO | S_IWUSR, root, &g_dbg_reg);
+	if (!node) {
+		dev_err(rtl->parent, "Creating debugfs file '%s' failed\n",
+			"reg");
+		return;
+	}
+
+	node = debugfs_create_file("val", S_IRUGO | S_IWUSR, root, rtl,
+				   &fops_rtl8366s_regs);
+	if (!node) {
+		dev_err(rtl->parent, "Creating debugfs file '%s' failed\n",
+			"val");
+		return;
+	}
+
+	node = debugfs_create_file("vlan_mc", S_IRUSR, root, rtl,
+				   &fops_rtl8366s_vlan_mc);
+	if (!node) {
+		dev_err(rtl->parent, "Creating debugfs file '%s' failed\n",
+			"vlan_mc");
+		return;
+	}
+
+	node = debugfs_create_file("mibs", S_IRUSR, root, rtl,
+				   &fops_rtl8366s_mibs);
+	if (!node) {
+		dev_err(rtl->parent, "Creating debugfs file '%s' failed\n",
+			"mibs");
+		return;
+	}
+}
+
+static void rtl8366s_debugfs_remove(struct rtl8366s *rtl)
+{
+	if (rtl->debugfs_root) {
+		debugfs_remove_recursive(rtl->debugfs_root);
+		rtl->debugfs_root = NULL;
+	}
+}
+
+#else
+static inline void rtl8366s_debugfs_init(struct rtl8366s *rtl) {}
+static inline void rtl8366s_debugfs_remove(struct rtl8366s *rtl) {}
+#endif /* CONFIG_RTL8366S_PHY_DEBUG_FS */
+
+static int rtl8366s_sw_reset_mibs(struct switch_dev *dev,
+				  const struct switch_attr *attr,
+				  struct switch_val *val)
+{
+	struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+	int err = 0;
+
+	if (val->value.i == 1)
+		err = rtl8366_smi_rmwr(smi, RTL8366S_MIB_CTRL_REG, 0, (1 << 2));
+
+	return err;
+}
+
+static int rtl8366s_sw_get_vlan_enable(struct switch_dev *dev,
+				       const struct switch_attr *attr,
+				       struct switch_val *val)
+{
+	struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+	u32 data;
+
+	if (attr->ofs == 1) {
+		rtl8366_smi_read_reg(smi, RTL8366_CHIP_GLOBAL_CTRL_REG, &data);
+
+		if (data & RTL8366_CHIP_CTRL_VLAN)
+			val->value.i = 1;
+		else
+			val->value.i = 0;
+	} else if (attr->ofs == 2) {
+		rtl8366_smi_read_reg(smi, RTL8366S_VLAN_TB_CTRL_REG, &data);
+
+		if (data & 0x0001)
+			val->value.i = 1;
+		else
+			val->value.i = 0;
+	}
+
+	return 0;
+}
+
+static int rtl8366s_sw_get_blinkrate(struct switch_dev *dev,
+				     const struct switch_attr *attr,
+				     struct switch_val *val)
+{
+	struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+	u32 data;
+
+	rtl8366_smi_read_reg(smi, RTL8366_LED_BLINKRATE_REG, &data);
+
+	val->value.i = (data & (RTL8366_LED_BLINKRATE_MASK));
+
+	return 0;
+}
+
+static int rtl8366s_sw_set_blinkrate(struct switch_dev *dev,
+				    const struct switch_attr *attr,
+				    struct switch_val *val)
+{
+	struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+
+	if (val->value.i >= 6)
+		return -EINVAL;
+
+	return rtl8366_smi_rmwr(smi, RTL8366_LED_BLINKRATE_REG,
+				RTL8366_LED_BLINKRATE_MASK,
+				val->value.i);
+}
+
+static int rtl8366s_sw_set_vlan_enable(struct switch_dev *dev,
+				       const struct switch_attr *attr,
+				       struct switch_val *val)
+{
+	struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+
+	if (attr->ofs == 1)
+		return rtl8366s_vlan_set_vlan(smi, val->value.i);
+	else
+		return rtl8366s_vlan_set_4ktable(smi, val->value.i);
+}
+
+static const char *rtl8366s_speed_str(unsigned speed)
+{
+	switch (speed) {
+	case 0:
+		return "10baseT";
+	case 1:
+		return "100baseT";
+	case 2:
+		return "1000baseT";
+	}
+
+	return "unknown";
+}
+
+static int rtl8366s_sw_get_port_link(struct switch_dev *dev,
+				     const struct switch_attr *attr,
+				     struct switch_val *val)
+{
+	struct rtl8366s *rtl = sw_to_rtl8366s(dev);
+	struct rtl8366_smi *smi = &rtl->smi;
+	u32 len = 0, data = 0;
+
+	if (val->port_vlan >= RTL8366_NUM_PORTS)
+		return -EINVAL;
+
+	memset(rtl->buf, '\0', sizeof(rtl->buf));
+	rtl8366_smi_read_reg(smi, RTL8366S_PORT_LINK_STATUS_BASE +
+			     (val->port_vlan / 2), &data);
+
+	if (val->port_vlan % 2)
+		data = data >> 8;
+
+	if (data & RTL8366S_PORT_STATUS_LINK_MASK) {
+		len = snprintf(rtl->buf, sizeof(rtl->buf),
+				"port:%d link:up speed:%s %s-duplex %s%s%s",
+				val->port_vlan,
+				rtl8366s_speed_str(data &
+					  RTL8366S_PORT_STATUS_SPEED_MASK),
+				(data & RTL8366S_PORT_STATUS_DUPLEX_MASK) ?
+					"full" : "half",
+				(data & RTL8366S_PORT_STATUS_TXPAUSE_MASK) ?
+					"tx-pause ": "",
+				(data & RTL8366S_PORT_STATUS_RXPAUSE_MASK) ?
+					"rx-pause " : "",
+				(data & RTL8366S_PORT_STATUS_AN_MASK) ?
+					"nway ": "");
+	} else {
+		len = snprintf(rtl->buf, sizeof(rtl->buf), "port:%d link: down",
+				val->port_vlan);
+	}
+
+	val->value.s = rtl->buf;
+	val->len = len;
+
+	return 0;
+}
+
+static int rtl8366s_sw_get_vlan_info(struct switch_dev *dev,
+				     const struct switch_attr *attr,
+				     struct switch_val *val)
+{
+	int i;
+	u32 len = 0;
+	struct rtl8366_vlan_4k vlan4k;
+	struct rtl8366s *rtl = sw_to_rtl8366s(dev);
+	struct rtl8366_smi *smi = &rtl->smi;
+	char *buf = rtl->buf;
+	int err;
+
+	if (val->port_vlan == 0 || val->port_vlan >= RTL8366_NUM_VLANS)
+		return -EINVAL;
+
+	memset(buf, '\0', sizeof(rtl->buf));
+
+	err = rtl8366s_get_vlan_4k(smi, val->port_vlan, &vlan4k);
+	if (err)
+		return err;
+
+	len += snprintf(buf + len, sizeof(rtl->buf) - len,
+			"VLAN %d: Ports: '", vlan4k.vid);
+
+	for (i = 0; i < RTL8366_NUM_PORTS; i++) {
+		if (!(vlan4k.member & (1 << i)))
+			continue;
+
+		len += snprintf(buf + len, sizeof(rtl->buf) - len, "%d%s", i,
+				(vlan4k.untag & (1 << i)) ? "" : "t");
+	}
+
+	len += snprintf(buf + len, sizeof(rtl->buf) - len,
+			"', members=%04x, untag=%04x, fid=%u",
+			vlan4k.member, vlan4k.untag, vlan4k.fid);
+
+	val->value.s = buf;
+	val->len = len;
+
+	return 0;
+}
+
+static int rtl8366s_sw_set_port_led(struct switch_dev *dev,
+				    const struct switch_attr *attr,
+				    struct switch_val *val)
+{
+	struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+	u32 data;
+	u32 mask;
+	u32 reg;
+
+	if (val->port_vlan >= RTL8366_NUM_PORTS ||
+	    (1 << val->port_vlan) == RTL8366_PORT_UNKNOWN)
+		return -EINVAL;
+
+	if (val->port_vlan == RTL8366_PORT_NUM_CPU) {
+		reg = RTL8366_LED_BLINKRATE_REG;
+		mask = 0xF << 4;
+		data = val->value.i << 4;
+	} else {
+		reg = RTL8366_LED_CTRL_REG;
+		mask = 0xF << (val->port_vlan * 4),
+		data = val->value.i << (val->port_vlan * 4);
+	}
+
+	return rtl8366_smi_rmwr(smi, RTL8366_LED_BLINKRATE_REG, mask, data);
+}
+
+static int rtl8366s_sw_get_port_led(struct switch_dev *dev,
+				    const struct switch_attr *attr,
+				    struct switch_val *val)
+{
+	struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+	u32 data = 0;
+
+	if (val->port_vlan >= RTL8366_NUM_LEDGROUPS)
+		return -EINVAL;
+
+	rtl8366_smi_read_reg(smi, RTL8366_LED_CTRL_REG, &data);
+	val->value.i = (data >> (val->port_vlan * 4)) & 0x000F;
+
+	return 0;
+}
+
+static int rtl8366s_sw_reset_port_mibs(struct switch_dev *dev,
+				       const struct switch_attr *attr,
+				       struct switch_val *val)
+{
+	struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+
+	if (val->port_vlan >= RTL8366_NUM_PORTS)
+		return -EINVAL;
+
+
+	return rtl8366_smi_rmwr(smi, RTL8366S_MIB_CTRL_REG,
+				0, (1 << (val->port_vlan + 3)));
+}
+
+static int rtl8366s_sw_get_port_mib(struct switch_dev *dev,
+				    const struct switch_attr *attr,
+				    struct switch_val *val)
+{
+	struct rtl8366s *rtl = sw_to_rtl8366s(dev);
+	struct rtl8366_smi *smi = &rtl->smi;
+	int i, len = 0;
+	unsigned long long counter = 0;
+	char *buf = rtl->buf;
+
+	if (val->port_vlan >= RTL8366_NUM_PORTS)
+		return -EINVAL;
+
+	len += snprintf(buf + len, sizeof(rtl->buf) - len,
+			"Port %d MIB counters\n",
+			val->port_vlan);
+
+	for (i = 0; i < ARRAY_SIZE(rtl8366s_mib_counters); ++i) {
+		len += snprintf(buf + len, sizeof(rtl->buf) - len,
+				"%-36s: ", rtl8366s_mib_counters[i].name);
+		if (!rtl8366_get_mib_counter(smi, i, val->port_vlan, &counter))
+			len += snprintf(buf + len, sizeof(rtl->buf) - len,
+					"%llu\n", counter);
+		else
+			len += snprintf(buf + len, sizeof(rtl->buf) - len,
+					"%s\n", "error");
+	}
+
+	val->value.s = buf;
+	val->len = len;
+	return 0;
+}
+
+static int rtl8366s_sw_get_vlan_ports(struct switch_dev *dev,
+				      struct switch_val *val)
+{
+	struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+	struct switch_port *port;
+	struct rtl8366_vlan_4k vlan4k;
+	int i;
+
+	if (val->port_vlan == 0 || val->port_vlan >= RTL8366_NUM_VLANS)
+		return -EINVAL;
+
+	rtl8366s_get_vlan_4k(smi, val->port_vlan, &vlan4k);
+
+	port = &val->value.ports[0];
+	val->len = 0;
+	for (i = 0; i < RTL8366_NUM_PORTS; i++) {
+		if (!(vlan4k.member & BIT(i)))
+			continue;
+
+		port->id = i;
+		port->flags = (vlan4k.untag & BIT(i)) ?
+					0 : BIT(SWITCH_PORT_FLAG_TAGGED);
+		val->len++;
+		port++;
+	}
+	return 0;
+}
+
+static int rtl8366s_sw_set_vlan_ports(struct switch_dev *dev,
+				      struct switch_val *val)
+{
+	struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+	struct switch_port *port;
+	u32 member = 0;
+	u32 untag = 0;
+	int i;
+
+	if (val->port_vlan == 0 || val->port_vlan >= RTL8366_NUM_VLANS)
+		return -EINVAL;
+
+	port = &val->value.ports[0];
+	for (i = 0; i < val->len; i++, port++) {
+		member |= BIT(port->id);
+
+		if (!(port->flags & BIT(SWITCH_PORT_FLAG_TAGGED)))
+			untag |= BIT(port->id);
+	}
+
+	return rtl8366s_set_vlan(smi, val->port_vlan, member, untag, 0);
+}
+
+static int rtl8366s_sw_get_port_pvid(struct switch_dev *dev, int port, int *val)
+{
+	struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+	return rtl8366s_get_pvid(smi, port, val);
+}
+
+static int rtl8366s_sw_set_port_pvid(struct switch_dev *dev, int port, int val)
+{
+	struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+	return rtl8366s_set_pvid(smi, port, val);
+}
+
+static int rtl8366s_sw_reset_switch(struct switch_dev *dev)
+{
+	struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+	int err;
+
+	err = rtl8366s_reset_chip(smi);
+	if (err)
+		return err;
+
+	err = rtl8366s_hw_init(smi);
+	if (err)
+		return err;
+
+	return rtl8366s_reset_vlan(smi);
+}
+
+static struct switch_attr rtl8366s_globals[] = {
+	{
+		.type = SWITCH_TYPE_INT,
+		.name = "enable_vlan",
+		.description = "Enable VLAN mode",
+		.set = rtl8366s_sw_set_vlan_enable,
+		.get = rtl8366s_sw_get_vlan_enable,
+		.max = 1,
+		.ofs = 1
+	}, {
+		.type = SWITCH_TYPE_INT,
+		.name = "enable_vlan4k",
+		.description = "Enable VLAN 4K mode",
+		.set = rtl8366s_sw_set_vlan_enable,
+		.get = rtl8366s_sw_get_vlan_enable,
+		.max = 1,
+		.ofs = 2
+	}, {
+		.type = SWITCH_TYPE_INT,
+		.name = "reset_mibs",
+		.description = "Reset all MIB counters",
+		.set = rtl8366s_sw_reset_mibs,
+		.get = NULL,
+		.max = 1
+	}, {
+		.type = SWITCH_TYPE_INT,
+		.name = "blinkrate",
+		.description = "Get/Set LED blinking rate (0 = 43ms, 1 = 84ms,"
+		" 2 = 120ms, 3 = 170ms, 4 = 340ms, 5 = 670ms)",
+		.set = rtl8366s_sw_set_blinkrate,
+		.get = rtl8366s_sw_get_blinkrate,
+		.max = 5
+	},
+};
+
+static struct switch_attr rtl8366s_port[] = {
+	{
+		.type = SWITCH_TYPE_STRING,
+		.name = "link",
+		.description = "Get port link information",
+		.max = 1,
+		.set = NULL,
+		.get = rtl8366s_sw_get_port_link,
+	}, {
+		.type = SWITCH_TYPE_INT,
+		.name = "reset_mib",
+		.description = "Reset single port MIB counters",
+		.max = 1,
+		.set = rtl8366s_sw_reset_port_mibs,
+		.get = NULL,
+	}, {
+		.type = SWITCH_TYPE_STRING,
+		.name = "mib",
+		.description = "Get MIB counters for port",
+		.max = 33,
+		.set = NULL,
+		.get = rtl8366s_sw_get_port_mib,
+	}, {
+		.type = SWITCH_TYPE_INT,
+		.name = "led",
+		.description = "Get/Set port group (0 - 3) led mode (0 - 15)",
+		.max = 15,
+		.set = rtl8366s_sw_set_port_led,
+		.get = rtl8366s_sw_get_port_led,
+	},
+};
+
+static struct switch_attr rtl8366s_vlan[] = {
+	{
+		.type = SWITCH_TYPE_STRING,
+		.name = "info",
+		.description = "Get vlan information",
+		.max = 1,
+		.set = NULL,
+		.get = rtl8366s_sw_get_vlan_info,
+	},
+};
+
+/* template */
+static struct switch_dev rtl8366_switch_dev = {
+	.name = "RTL8366S",
+	.cpu_port = RTL8366_PORT_NUM_CPU,
+	.ports = RTL8366_NUM_PORTS,
+	.vlans = RTL8366_NUM_VLANS,
+	.attr_global = {
+		.attr = rtl8366s_globals,
+		.n_attr = ARRAY_SIZE(rtl8366s_globals),
+	},
+	.attr_port = {
+		.attr = rtl8366s_port,
+		.n_attr = ARRAY_SIZE(rtl8366s_port),
+	},
+	.attr_vlan = {
+		.attr = rtl8366s_vlan,
+		.n_attr = ARRAY_SIZE(rtl8366s_vlan),
+	},
+
+	.get_vlan_ports = rtl8366s_sw_get_vlan_ports,
+	.set_vlan_ports = rtl8366s_sw_set_vlan_ports,
+	.get_port_pvid = rtl8366s_sw_get_port_pvid,
+	.set_port_pvid = rtl8366s_sw_set_port_pvid,
+	.reset_switch = rtl8366s_sw_reset_switch,
+};
+
+static int rtl8366s_switch_init(struct rtl8366s *rtl)
+{
+	struct switch_dev *dev = &rtl->dev;
+	int err;
+
+	memcpy(dev, &rtl8366_switch_dev, sizeof(struct switch_dev));
+	dev->priv = rtl;
+	dev->devname = dev_name(rtl->parent);
+
+	err = register_switch(dev, NULL);
+	if (err)
+		dev_err(rtl->parent, "switch registration failed\n");
+
+	return err;
+}
+
+static void rtl8366s_switch_cleanup(struct rtl8366s *rtl)
+{
+	unregister_switch(&rtl->dev);
+}
+
+static int rtl8366s_mii_read(struct mii_bus *bus, int addr, int reg)
+{
+	struct rtl8366_smi *smi = bus->priv;
+	u32 val = 0;
+	int err;
+
+	err = rtl8366s_read_phy_reg(smi, addr, 0, reg, &val);
+	if (err)
+		return 0xffff;
+
+	return val;
+}
+
+static int rtl8366s_mii_write(struct mii_bus *bus, int addr, int reg, u16 val)
+{
+	struct rtl8366_smi *smi = bus->priv;
+	u32 t;
+	int err;
+
+	err = rtl8366s_write_phy_reg(smi, addr, 0, reg, val);
+	/* flush write */
+	(void) rtl8366s_read_phy_reg(smi, addr, 0, reg, &t);
+
+	return err;
+}
+
+static int rtl8366s_mii_bus_match(struct mii_bus *bus)
+{
+	return (bus->read == rtl8366s_mii_read &&
+		bus->write == rtl8366s_mii_write);
+}
+
+static int rtl8366s_setup(struct rtl8366s *rtl)
+{
+	struct rtl8366_smi *smi = &rtl->smi;
+	int ret;
+
+	rtl8366s_debugfs_init(rtl);
+
+	ret = rtl8366s_reset_chip(smi);
+	if (ret)
+		return ret;
+
+	ret = rtl8366s_hw_init(smi);
+	return ret;
+}
+
+static int rtl8366s_detect(struct rtl8366_smi *smi)
+{
+	u32 chip_id = 0;
+	u32 chip_ver = 0;
+	int ret;
+
+	ret = rtl8366_smi_read_reg(smi, RTL8366S_CHIP_ID_REG, &chip_id);
+	if (ret) {
+		dev_err(smi->parent, "unable to read chip id\n");
+		return ret;
+	}
+
+	switch (chip_id) {
+	case RTL8366S_CHIP_ID_8366:
+		break;
+	default:
+		dev_err(smi->parent, "unknown chip id (%04x)\n", chip_id);
+		return -ENODEV;
+	}
+
+	ret = rtl8366_smi_read_reg(smi, RTL8366S_CHIP_VERSION_CTRL_REG,
+				   &chip_ver);
+	if (ret) {
+		dev_err(smi->parent, "unable to read chip version\n");
+		return ret;
+	}
+
+	dev_info(smi->parent, "RTL%04x ver. %u chip found\n",
+		 chip_id, chip_ver & RTL8366S_CHIP_VERSION_MASK);
+
+	return 0;
+}
+
+static struct rtl8366_smi_ops rtl8366s_smi_ops = {
+	.detect		= rtl8366s_detect,
+	.mii_read	= rtl8366s_mii_read,
+	.mii_write	= rtl8366s_mii_write,
+};
+
+static int __init rtl8366s_probe(struct platform_device *pdev)
+{
+	static int rtl8366_smi_version_printed;
+	struct rtl8366s_platform_data *pdata;
+	struct rtl8366s *rtl;
+	struct rtl8366_smi *smi;
+	int err;
+
+	if (!rtl8366_smi_version_printed++)
+		printk(KERN_NOTICE RTL8366S_DRIVER_DESC
+		       " version " RTL8366S_DRIVER_VER"\n");
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data specified\n");
+		err = -EINVAL;
+		goto err_out;
+	}
+
+	rtl = kzalloc(sizeof(*rtl), GFP_KERNEL);
+	if (!rtl) {
+		dev_err(&pdev->dev, "no memory for private data\n");
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	rtl->parent = &pdev->dev;
+
+	smi = &rtl->smi;
+	smi->parent = &pdev->dev;
+	smi->gpio_sda = pdata->gpio_sda;
+	smi->gpio_sck = pdata->gpio_sck;
+	smi->ops = &rtl8366s_smi_ops;
+
+	err = rtl8366_smi_init(smi);
+	if (err)
+		goto err_free_rtl;
+
+	platform_set_drvdata(pdev, rtl);
+
+	err = rtl8366s_setup(rtl);
+	if (err)
+		goto err_clear_drvdata;
+
+	err = rtl8366s_switch_init(rtl);
+	if (err)
+		goto err_clear_drvdata;
+
+	return 0;
+
+ err_clear_drvdata:
+	platform_set_drvdata(pdev, NULL);
+	rtl8366_smi_cleanup(smi);
+ err_free_rtl:
+	kfree(rtl);
+ err_out:
+	return err;
+}
+
+static int rtl8366s_phy_config_init(struct phy_device *phydev)
+{
+	if (!rtl8366s_mii_bus_match(phydev->bus))
+		return -EINVAL;
+
+	return 0;
+}
+
+static int rtl8366s_phy_config_aneg(struct phy_device *phydev)
+{
+	return 0;
+}
+
+static struct phy_driver rtl8366s_phy_driver = {
+	.phy_id		= 0x001cc960,
+	.name		= "Realtek RTL8366S",
+	.phy_id_mask	= 0x1ffffff0,
+	.features	= PHY_GBIT_FEATURES,
+	.config_aneg	= rtl8366s_phy_config_aneg,
+	.config_init    = rtl8366s_phy_config_init,
+	.read_status	= genphy_read_status,
+	.driver		= {
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __devexit rtl8366s_remove(struct platform_device *pdev)
+{
+	struct rtl8366s *rtl = platform_get_drvdata(pdev);
+
+	if (rtl) {
+		rtl8366s_switch_cleanup(rtl);
+		rtl8366s_debugfs_remove(rtl);
+		platform_set_drvdata(pdev, NULL);
+		rtl8366_smi_cleanup(&rtl->smi);
+		kfree(rtl);
+	}
+
+	return 0;
+}
+
+static struct platform_driver rtl8366s_driver = {
+	.driver = {
+		.name		= RTL8366S_DRIVER_NAME,
+		.owner		= THIS_MODULE,
+	},
+	.probe		= rtl8366s_probe,
+	.remove		= __devexit_p(rtl8366s_remove),
+};
+
+static int __init rtl8366s_module_init(void)
+{
+	int ret;
+	ret = platform_driver_register(&rtl8366s_driver);
+	if (ret)
+		return ret;
+
+	ret = phy_driver_register(&rtl8366s_phy_driver);
+	if (ret)
+		goto err_platform_unregister;
+
+	return 0;
+
+ err_platform_unregister:
+	platform_driver_unregister(&rtl8366s_driver);
+	return ret;
+}
+module_init(rtl8366s_module_init);
+
+static void __exit rtl8366s_module_exit(void)
+{
+	phy_driver_unregister(&rtl8366s_phy_driver);
+	platform_driver_unregister(&rtl8366s_driver);
+}
+module_exit(rtl8366s_module_exit);
+
+MODULE_DESCRIPTION(RTL8366S_DRIVER_DESC);
+MODULE_VERSION(RTL8366S_DRIVER_VER);
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_AUTHOR("Antti Seppälä <a.seppala@gmail.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" RTL8366S_DRIVER_NAME);
diff --git a/target/linux/generic/files/drivers/net/phy/swconfig.c b/target/linux/generic/files/drivers/net/phy/swconfig.c
new file mode 100644
index 0000000000..dea8e78b79
--- /dev/null
+++ b/target/linux/generic/files/drivers/net/phy/swconfig.c
@@ -0,0 +1,925 @@
+/*
+ * swconfig.c: Switch configuration API
+ *
+ * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/if.h>
+#include <linux/if_ether.h>
+#include <linux/capability.h>
+#include <linux/skbuff.h>
+#include <linux/switch.h>
+
+//#define DEBUG 1
+#ifdef DEBUG
+#define DPRINTF(format, ...) printk("%s: " format, __func__, ##__VA_ARGS__)
+#else
+#define DPRINTF(...) do {} while(0)
+#endif
+
+MODULE_AUTHOR("Felix Fietkau <nbd@openwrt.org>");
+MODULE_LICENSE("GPL");
+
+static int swdev_id = 0;
+static struct list_head swdevs;
+static spinlock_t swdevs_lock = SPIN_LOCK_UNLOCKED;
+struct swconfig_callback;
+
+struct swconfig_callback
+{
+	struct sk_buff *msg;
+	struct genlmsghdr *hdr;
+	struct genl_info *info;
+	int cmd;
+
+	/* callback for filling in the message data */
+	int (*fill)(struct swconfig_callback *cb, void *arg);
+
+	/* callback for closing the message before sending it */
+	int (*close)(struct swconfig_callback *cb, void *arg);
+
+	struct nlattr *nest[4];
+	int args[4];
+};
+
+/* defaults */
+
+static int
+swconfig_get_vlan_ports(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	int ret;
+	if (val->port_vlan >= dev->vlans)
+		return -EINVAL;
+
+	if (!dev->get_vlan_ports)
+		return -EOPNOTSUPP;
+
+	ret = dev->get_vlan_ports(dev, val);
+	return ret;
+}
+
+static int
+swconfig_set_vlan_ports(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	struct switch_port *ports = val->value.ports;
+	int i;
+
+	if (val->port_vlan >= dev->vlans)
+		return -EINVAL;
+
+	/* validate ports */
+	if (val->len > dev->ports)
+		return -EINVAL;
+
+	if (!dev->set_vlan_ports)
+		return -EOPNOTSUPP;
+
+	for (i = 0; i < val->len; i++) {
+		if (ports[i].id >= dev->ports)
+			return -EINVAL;
+
+		if (dev->set_port_pvid && !(ports[i].flags & (1 << SWITCH_PORT_FLAG_TAGGED)))
+			dev->set_port_pvid(dev, ports[i].id, val->port_vlan);
+	}
+
+	return dev->set_vlan_ports(dev, val);
+}
+
+static int
+swconfig_set_pvid(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	if (val->port_vlan >= dev->ports)
+		return -EINVAL;
+
+	if (!dev->set_port_pvid)
+		return -EOPNOTSUPP;
+
+	return dev->set_port_pvid(dev, val->port_vlan, val->value.i);
+}
+
+static int
+swconfig_get_pvid(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	if (val->port_vlan >= dev->ports)
+		return -EINVAL;
+
+	if (!dev->get_port_pvid)
+		return -EOPNOTSUPP;
+
+	return dev->get_port_pvid(dev, val->port_vlan, &val->value.i);
+}
+
+static int
+swconfig_apply_config(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	/* don't complain if not supported by the switch driver */
+	if (!dev->apply_config)
+		return 0;
+
+	return dev->apply_config(dev);
+}
+
+static int
+swconfig_reset_switch(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+	/* don't complain if not supported by the switch driver */
+	if (!dev->reset_switch)
+		return 0;
+
+	return dev->reset_switch(dev);
+}
+
+enum global_defaults {
+	GLOBAL_APPLY,
+	GLOBAL_RESET,
+};
+
+enum vlan_defaults {
+	VLAN_PORTS,
+};
+
+enum port_defaults {
+	PORT_PVID,
+};
+
+static struct switch_attr default_global[] = {
+	[GLOBAL_APPLY] = {
+		.type = SWITCH_TYPE_NOVAL,
+		.name = "apply",
+		.description = "Activate changes in the hardware",
+		.set = swconfig_apply_config,
+	},
+	[GLOBAL_RESET] = {
+		.type = SWITCH_TYPE_NOVAL,
+		.name = "reset",
+		.description = "Reset the switch",
+		.set = swconfig_reset_switch,
+	}
+};
+
+static struct switch_attr default_port[] = {
+	[PORT_PVID] = {
+		.type = SWITCH_TYPE_INT,
+		.name = "pvid",
+		.description = "Primary VLAN ID",
+		.set = swconfig_set_pvid,
+		.get = swconfig_get_pvid,
+	}
+};
+
+static struct switch_attr default_vlan[] = {
+	[VLAN_PORTS] = {
+		.type = SWITCH_TYPE_PORTS,
+		.name = "ports",
+		.description = "VLAN port mapping",
+		.set = swconfig_set_vlan_ports,
+		.get = swconfig_get_vlan_ports,
+	},
+};
+
+
+static void swconfig_defaults_init(struct switch_dev *dev)
+{
+	dev->def_global = 0;
+	dev->def_vlan = 0;
+	dev->def_port = 0;
+
+	if (dev->get_vlan_ports || dev->set_vlan_ports)
+		set_bit(VLAN_PORTS, &dev->def_vlan);
+
+	if (dev->get_port_pvid || dev->set_port_pvid)
+		set_bit(PORT_PVID, &dev->def_port);
+
+	/* always present, can be no-op */
+	set_bit(GLOBAL_APPLY, &dev->def_global);
+	set_bit(GLOBAL_RESET, &dev->def_global);
+}
+
+
+static struct genl_family switch_fam = {
+	.id = GENL_ID_GENERATE,
+	.name = "switch",
+	.hdrsize = 0,
+	.version = 1,
+	.maxattr = SWITCH_ATTR_MAX,
+};
+
+static const struct nla_policy switch_policy[SWITCH_ATTR_MAX+1] = {
+	[SWITCH_ATTR_ID] = { .type = NLA_U32 },
+	[SWITCH_ATTR_OP_ID] = { .type = NLA_U32 },
+	[SWITCH_ATTR_OP_PORT] = { .type = NLA_U32 },
+	[SWITCH_ATTR_OP_VLAN] = { .type = NLA_U32 },
+	[SWITCH_ATTR_OP_VALUE_INT] = { .type = NLA_U32 },
+	[SWITCH_ATTR_OP_VALUE_STR] = { .type = NLA_NUL_STRING },
+	[SWITCH_ATTR_OP_VALUE_PORTS] = { .type = NLA_NESTED },
+	[SWITCH_ATTR_TYPE] = { .type = NLA_U32 },
+};
+
+static const struct nla_policy port_policy[SWITCH_PORT_ATTR_MAX+1] = {
+	[SWITCH_PORT_ID] = { .type = NLA_U32 },
+	[SWITCH_PORT_FLAG_TAGGED] = { .type = NLA_FLAG },
+};
+
+static inline void
+swconfig_lock(void)
+{
+	spin_lock(&swdevs_lock);
+}
+
+static inline void
+swconfig_unlock(void)
+{
+	spin_unlock(&swdevs_lock);
+}
+
+static struct switch_dev *
+swconfig_get_dev(struct genl_info *info)
+{
+	struct switch_dev *dev = NULL;
+	struct switch_dev *p;
+	int id;
+
+	if (!info->attrs[SWITCH_ATTR_ID])
+		goto done;
+
+	id = nla_get_u32(info->attrs[SWITCH_ATTR_ID]);
+	swconfig_lock();
+	list_for_each_entry(p, &swdevs, dev_list) {
+		if (id != p->id)
+			continue;
+
+		dev = p;
+		break;
+	}
+	if (dev)
+		spin_lock(&dev->lock);
+	else
+		DPRINTF("device %d not found\n", id);
+	swconfig_unlock();
+done:
+	return dev;
+}
+
+static inline void
+swconfig_put_dev(struct switch_dev *dev)
+{
+	spin_unlock(&dev->lock);
+}
+
+static int
+swconfig_dump_attr(struct swconfig_callback *cb, void *arg)
+{
+	struct switch_attr *op = arg;
+	struct genl_info *info = cb->info;
+	struct sk_buff *msg = cb->msg;
+	int id = cb->args[0];
+	void *hdr;
+
+	hdr = genlmsg_put(msg, info->snd_pid, info->snd_seq, &switch_fam,
+			NLM_F_MULTI, SWITCH_CMD_NEW_ATTR);
+	if (IS_ERR(hdr))
+		return -1;
+
+	NLA_PUT_U32(msg, SWITCH_ATTR_OP_ID, id);
+	NLA_PUT_U32(msg, SWITCH_ATTR_OP_TYPE, op->type);
+	NLA_PUT_STRING(msg, SWITCH_ATTR_OP_NAME, op->name);
+	if (op->description)
+		NLA_PUT_STRING(msg, SWITCH_ATTR_OP_DESCRIPTION,
+			op->description);
+
+	return genlmsg_end(msg, hdr);
+nla_put_failure:
+	genlmsg_cancel(msg, hdr);
+	return -EMSGSIZE;
+}
+
+/* spread multipart messages across multiple message buffers */
+static int
+swconfig_send_multipart(struct swconfig_callback *cb, void *arg)
+{
+	struct genl_info *info = cb->info;
+	int restart = 0;
+	int err;
+
+	do {
+		if (!cb->msg) {
+			cb->msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+			if (cb->msg == NULL)
+				goto error;
+		}
+
+		if (!(cb->fill(cb, arg) < 0))
+			break;
+
+		/* fill failed, check if this was already the second attempt */
+		if (restart)
+			goto error;
+
+		/* try again in a new message, send the current one */
+		restart = 1;
+		if (cb->close) {
+			if (cb->close(cb, arg) < 0)
+				goto error;
+		}
+		err = genlmsg_unicast(cb->msg, info->snd_pid);
+		cb->msg = NULL;
+		if (err < 0)
+			goto error;
+
+	} while (restart);
+
+	return 0;
+
+error:
+	if (cb->msg)
+		nlmsg_free(cb->msg);
+	return -1;
+}
+
+static int
+swconfig_list_attrs(struct sk_buff *skb, struct genl_info *info)
+{
+	struct genlmsghdr *hdr = nlmsg_data(info->nlhdr);
+	const struct switch_attrlist *alist;
+	struct switch_dev *dev;
+	struct swconfig_callback cb;
+	int err = -EINVAL;
+	int i;
+
+	/* defaults */
+	struct switch_attr *def_list;
+	unsigned long *def_active;
+	int n_def;
+
+	dev = swconfig_get_dev(info);
+	if (!dev)
+		return -EINVAL;
+
+	switch(hdr->cmd) {
+	case SWITCH_CMD_LIST_GLOBAL:
+		alist = &dev->attr_global;
+		def_list = default_global;
+		def_active = &dev->def_global;
+		n_def = ARRAY_SIZE(default_global);
+		break;
+	case SWITCH_CMD_LIST_VLAN:
+		alist = &dev->attr_vlan;
+		def_list = default_vlan;
+		def_active = &dev->def_vlan;
+		n_def = ARRAY_SIZE(default_vlan);
+		break;
+	case SWITCH_CMD_LIST_PORT:
+		alist = &dev->attr_port;
+		def_list = default_port;
+		def_active = &dev->def_port;
+		n_def = ARRAY_SIZE(default_port);
+		break;
+	default:
+		WARN_ON(1);
+		goto out;
+	}
+
+	memset(&cb, 0, sizeof(cb));
+	cb.info = info;
+	cb.fill = swconfig_dump_attr;
+	for (i = 0; i < alist->n_attr; i++) {
+		if (alist->attr[i].disabled)
+			continue;
+		cb.args[0] = i;
+		err = swconfig_send_multipart(&cb, (void *) &alist->attr[i]);
+		if (err < 0)
+			goto error;
+	}
+
+	/* defaults */
+	for (i = 0; i < n_def; i++) {
+		if (!test_bit(i, def_active))
+			continue;
+		cb.args[0] = SWITCH_ATTR_DEFAULTS_OFFSET + i;
+		err = swconfig_send_multipart(&cb, (void *) &def_list[i]);
+		if (err < 0)
+			goto error;
+	}
+	swconfig_put_dev(dev);
+
+	if (!cb.msg)
+		return 0;
+
+	return genlmsg_unicast(cb.msg, info->snd_pid);
+
+error:
+	if (cb.msg)
+		nlmsg_free(cb.msg);
+out:
+	swconfig_put_dev(dev);
+	return err;
+}
+
+static const struct switch_attr *
+swconfig_lookup_attr(struct switch_dev *dev, struct genl_info *info,
+		struct switch_val *val)
+{
+	struct genlmsghdr *hdr = nlmsg_data(info->nlhdr);
+	const struct switch_attrlist *alist;
+	const struct switch_attr *attr = NULL;
+	int attr_id;
+
+	/* defaults */
+	struct switch_attr *def_list;
+	unsigned long *def_active;
+	int n_def;
+
+	if (!info->attrs[SWITCH_ATTR_OP_ID])
+		goto done;
+
+	switch(hdr->cmd) {
+	case SWITCH_CMD_SET_GLOBAL:
+	case SWITCH_CMD_GET_GLOBAL:
+		alist = &dev->attr_global;
+		def_list = default_global;
+		def_active = &dev->def_global;
+		n_def = ARRAY_SIZE(default_global);
+		break;
+	case SWITCH_CMD_SET_VLAN:
+	case SWITCH_CMD_GET_VLAN:
+		alist = &dev->attr_vlan;
+		def_list = default_vlan;
+		def_active = &dev->def_vlan;
+		n_def = ARRAY_SIZE(default_vlan);
+		if (!info->attrs[SWITCH_ATTR_OP_VLAN])
+			goto done;
+		val->port_vlan = nla_get_u32(info->attrs[SWITCH_ATTR_OP_VLAN]);
+		if (val->port_vlan >= dev->vlans)
+			goto done;
+		break;
+	case SWITCH_CMD_SET_PORT:
+	case SWITCH_CMD_GET_PORT:
+		alist = &dev->attr_port;
+		def_list = default_port;
+		def_active = &dev->def_port;
+		n_def = ARRAY_SIZE(default_port);
+		if (!info->attrs[SWITCH_ATTR_OP_PORT])
+			goto done;
+		val->port_vlan = nla_get_u32(info->attrs[SWITCH_ATTR_OP_PORT]);
+		if (val->port_vlan >= dev->ports)
+			goto done;
+		break;
+	default:
+		WARN_ON(1);
+		goto done;
+	}
+
+	if (!alist)
+		goto done;
+
+	attr_id = nla_get_u32(info->attrs[SWITCH_ATTR_OP_ID]);
+	if (attr_id >= SWITCH_ATTR_DEFAULTS_OFFSET) {
+		attr_id -= SWITCH_ATTR_DEFAULTS_OFFSET;
+		if (attr_id >= n_def)
+			goto done;
+		if (!test_bit(attr_id, def_active))
+			goto done;
+		attr = &def_list[attr_id];
+	} else {
+		if (attr_id >= alist->n_attr)
+			goto done;
+		attr = &alist->attr[attr_id];
+	}
+
+	if (attr->disabled)
+		attr = NULL;
+
+done:
+	if (!attr)
+		DPRINTF("attribute lookup failed\n");
+	val->attr = attr;
+	return attr;
+}
+
+static int
+swconfig_parse_ports(struct sk_buff *msg, struct nlattr *head,
+		struct switch_val *val, int max)
+{
+	struct nlattr *nla;
+	int rem;
+
+	val->len = 0;
+	nla_for_each_nested(nla, head, rem) {
+		struct nlattr *tb[SWITCH_PORT_ATTR_MAX+1];
+		struct switch_port *port = &val->value.ports[val->len];
+
+		if (val->len >= max)
+			return -EINVAL;
+
+		if (nla_parse_nested(tb, SWITCH_PORT_ATTR_MAX, nla,
+				port_policy))
+			return -EINVAL;
+
+		if (!tb[SWITCH_PORT_ID])
+			return -EINVAL;
+
+		port->id = nla_get_u32(tb[SWITCH_PORT_ID]);
+		if (tb[SWITCH_PORT_FLAG_TAGGED])
+			port->flags |= (1 << SWITCH_PORT_FLAG_TAGGED);
+		val->len++;
+	}
+
+	return 0;
+}
+
+static int
+swconfig_set_attr(struct sk_buff *skb, struct genl_info *info)
+{
+	const struct switch_attr *attr;
+	struct switch_dev *dev;
+	struct switch_val val;
+	int err = -EINVAL;
+
+	dev = swconfig_get_dev(info);
+	if (!dev)
+		return -EINVAL;
+
+	memset(&val, 0, sizeof(val));
+	attr = swconfig_lookup_attr(dev, info, &val);
+	if (!attr || !attr->set)
+		goto error;
+
+	val.attr = attr;
+	switch(attr->type) {
+	case SWITCH_TYPE_NOVAL:
+		break;
+	case SWITCH_TYPE_INT:
+		if (!info->attrs[SWITCH_ATTR_OP_VALUE_INT])
+			goto error;
+		val.value.i =
+			nla_get_u32(info->attrs[SWITCH_ATTR_OP_VALUE_INT]);
+		break;
+	case SWITCH_TYPE_STRING:
+		if (!info->attrs[SWITCH_ATTR_OP_VALUE_STR])
+			goto error;
+		val.value.s =
+			nla_data(info->attrs[SWITCH_ATTR_OP_VALUE_STR]);
+		break;
+	case SWITCH_TYPE_PORTS:
+		val.value.ports = dev->portbuf;
+		memset(dev->portbuf, 0,
+			sizeof(struct switch_port) * dev->ports);
+
+		/* TODO: implement multipart? */
+		if (info->attrs[SWITCH_ATTR_OP_VALUE_PORTS]) {
+			err = swconfig_parse_ports(skb,
+				info->attrs[SWITCH_ATTR_OP_VALUE_PORTS], &val, dev->ports);
+			if (err < 0)
+				goto error;
+		} else {
+			val.len = 0;
+			err = 0;
+		}
+		break;
+	default:
+		goto error;
+	}
+
+	err = attr->set(dev, attr, &val);
+error:
+	swconfig_put_dev(dev);
+	return err;
+}
+
+static int
+swconfig_close_portlist(struct swconfig_callback *cb, void *arg)
+{
+	if (cb->nest[0])
+		nla_nest_end(cb->msg, cb->nest[0]);
+	return 0;
+}
+
+static int
+swconfig_send_port(struct swconfig_callback *cb, void *arg)
+{
+	const struct switch_port *port = arg;
+	struct nlattr *p = NULL;
+
+	if (!cb->nest[0]) {
+		cb->nest[0] = nla_nest_start(cb->msg, cb->cmd);
+		if (!cb->nest[0])
+			return -1;
+	}
+
+	p = nla_nest_start(cb->msg, SWITCH_ATTR_PORT);
+	if (!p)
+		goto error;
+
+	NLA_PUT_U32(cb->msg, SWITCH_PORT_ID, port->id);
+	if (port->flags & (1 << SWITCH_PORT_FLAG_TAGGED))
+		NLA_PUT_FLAG(cb->msg, SWITCH_PORT_FLAG_TAGGED);
+
+	nla_nest_end(cb->msg, p);
+	return 0;
+
+nla_put_failure:
+		nla_nest_cancel(cb->msg, p);
+error:
+	nla_nest_cancel(cb->msg, cb->nest[0]);
+	return -1;
+}
+
+static int
+swconfig_send_ports(struct sk_buff **msg, struct genl_info *info, int attr,
+		const struct switch_val *val)
+{
+	struct swconfig_callback cb;
+	int err = 0;
+	int i;
+
+	if (!val->value.ports)
+		return -EINVAL;
+
+	memset(&cb, 0, sizeof(cb));
+	cb.cmd = attr;
+	cb.msg = *msg;
+	cb.info = info;
+	cb.fill = swconfig_send_port;
+	cb.close = swconfig_close_portlist;
+
+	cb.nest[0] = nla_nest_start(cb.msg, cb.cmd);
+	for (i = 0; i < val->len; i++) {
+		err = swconfig_send_multipart(&cb, &val->value.ports[i]);
+		if (err)
+			goto done;
+	}
+	err = val->len;
+	swconfig_close_portlist(&cb, NULL);
+	*msg = cb.msg;
+
+done:
+	return err;
+}
+
+static int
+swconfig_get_attr(struct sk_buff *skb, struct genl_info *info)
+{
+	struct genlmsghdr *hdr = nlmsg_data(info->nlhdr);
+	const struct switch_attr *attr;
+	struct switch_dev *dev;
+	struct sk_buff *msg = NULL;
+	struct switch_val val;
+	int err = -EINVAL;
+	int cmd = hdr->cmd;
+
+	dev = swconfig_get_dev(info);
+	if (!dev)
+		return -EINVAL;
+
+	memset(&val, 0, sizeof(val));
+	attr = swconfig_lookup_attr(dev, info, &val);
+	if (!attr || !attr->get)
+		goto error;
+
+	if (attr->type == SWITCH_TYPE_PORTS) {
+		val.value.ports = dev->portbuf;
+		memset(dev->portbuf, 0,
+			sizeof(struct switch_port) * dev->ports);
+	}
+
+	err = attr->get(dev, attr, &val);
+	if (err)
+		goto error;
+
+	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	if (!msg)
+		goto error;
+
+	hdr = genlmsg_put(msg, info->snd_pid, info->snd_seq, &switch_fam,
+			0, cmd);
+	if (IS_ERR(hdr))
+		goto nla_put_failure;
+
+	switch(attr->type) {
+	case SWITCH_TYPE_INT:
+		NLA_PUT_U32(msg, SWITCH_ATTR_OP_VALUE_INT, val.value.i);
+		break;
+	case SWITCH_TYPE_STRING:
+		NLA_PUT_STRING(msg, SWITCH_ATTR_OP_VALUE_STR, val.value.s);
+		break;
+	case SWITCH_TYPE_PORTS:
+		err = swconfig_send_ports(&msg, info,
+				SWITCH_ATTR_OP_VALUE_PORTS, &val);
+		if (err < 0)
+			goto nla_put_failure;
+		break;
+	default:
+		DPRINTF("invalid type in attribute\n");
+		err = -EINVAL;
+		goto error;
+	}
+	err = genlmsg_end(msg, hdr);
+	if (err < 0)
+		goto nla_put_failure;
+
+	swconfig_put_dev(dev);
+	return genlmsg_unicast(msg, info->snd_pid);
+
+nla_put_failure:
+	if (msg)
+		nlmsg_free(msg);
+error:
+	swconfig_put_dev(dev);
+	if (!err)
+		err = -ENOMEM;
+	return err;
+}
+
+static int
+swconfig_send_switch(struct sk_buff *msg, u32 pid, u32 seq, int flags,
+		const struct switch_dev *dev)
+{
+	void *hdr;
+
+	hdr = genlmsg_put(msg, pid, seq, &switch_fam, flags,
+			SWITCH_CMD_NEW_ATTR);
+	if (IS_ERR(hdr))
+		return -1;
+
+	NLA_PUT_U32(msg, SWITCH_ATTR_ID, dev->id);
+	NLA_PUT_STRING(msg, SWITCH_ATTR_NAME, dev->name);
+	NLA_PUT_STRING(msg, SWITCH_ATTR_DEV_NAME, dev->devname);
+	NLA_PUT_U32(msg, SWITCH_ATTR_VLANS, dev->vlans);
+	NLA_PUT_U32(msg, SWITCH_ATTR_PORTS, dev->ports);
+	NLA_PUT_U32(msg, SWITCH_ATTR_CPU_PORT, dev->cpu_port);
+
+	return genlmsg_end(msg, hdr);
+nla_put_failure:
+	genlmsg_cancel(msg, hdr);
+	return -EMSGSIZE;
+}
+
+static int swconfig_dump_switches(struct sk_buff *skb,
+		struct netlink_callback *cb)
+{
+	struct switch_dev *dev;
+	int start = cb->args[0];
+	int idx = 0;
+
+	swconfig_lock();
+	list_for_each_entry(dev, &swdevs, dev_list) {
+		if (++idx <= start)
+			continue;
+		if (swconfig_send_switch(skb, NETLINK_CB(cb->skb).pid,
+				cb->nlh->nlmsg_seq, NLM_F_MULTI,
+				dev) < 0)
+			break;
+	}
+	swconfig_unlock();
+	cb->args[0] = idx;
+
+	return skb->len;
+}
+
+static int
+swconfig_done(struct netlink_callback *cb)
+{
+	return 0;
+}
+
+static struct genl_ops swconfig_ops[] = {
+	{
+		.cmd = SWITCH_CMD_LIST_GLOBAL,
+		.doit = swconfig_list_attrs,
+		.policy = switch_policy,
+	},
+	{
+		.cmd = SWITCH_CMD_LIST_VLAN,
+		.doit = swconfig_list_attrs,
+		.policy = switch_policy,
+	},
+	{
+		.cmd = SWITCH_CMD_LIST_PORT,
+		.doit = swconfig_list_attrs,
+		.policy = switch_policy,
+	},
+	{
+		.cmd = SWITCH_CMD_GET_GLOBAL,
+		.doit = swconfig_get_attr,
+		.policy = switch_policy,
+	},
+	{
+		.cmd = SWITCH_CMD_GET_VLAN,
+		.doit = swconfig_get_attr,
+		.policy = switch_policy,
+	},
+	{
+		.cmd = SWITCH_CMD_GET_PORT,
+		.doit = swconfig_get_attr,
+		.policy = switch_policy,
+	},
+	{
+		.cmd = SWITCH_CMD_SET_GLOBAL,
+		.doit = swconfig_set_attr,
+		.policy = switch_policy,
+	},
+	{
+		.cmd = SWITCH_CMD_SET_VLAN,
+		.doit = swconfig_set_attr,
+		.policy = switch_policy,
+	},
+	{
+		.cmd = SWITCH_CMD_SET_PORT,
+		.doit = swconfig_set_attr,
+		.policy = switch_policy,
+	},
+	{
+		.cmd = SWITCH_CMD_GET_SWITCH,
+		.dumpit = swconfig_dump_switches,
+		.policy = switch_policy,
+		.done = swconfig_done,
+	}
+};
+
+int
+register_switch(struct switch_dev *dev, struct net_device *netdev)
+{
+	INIT_LIST_HEAD(&dev->dev_list);
+	if (netdev) {
+		dev->netdev = netdev;
+		if (!dev->devname)
+			dev->devname = netdev->name;
+	}
+	BUG_ON(!dev->devname);
+
+	if (dev->ports > 0) {
+		dev->portbuf = kzalloc(sizeof(struct switch_port) * dev->ports,
+				GFP_KERNEL);
+		if (!dev->portbuf)
+			return -ENOMEM;
+	}
+	dev->id = ++swdev_id;
+	swconfig_defaults_init(dev);
+	spin_lock_init(&dev->lock);
+	swconfig_lock();
+	list_add(&dev->dev_list, &swdevs);
+	swconfig_unlock();
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(register_switch);
+
+void
+unregister_switch(struct switch_dev *dev)
+{
+	kfree(dev->portbuf);
+	spin_lock(&dev->lock);
+	swconfig_lock();
+	list_del(&dev->dev_list);
+	swconfig_unlock();
+	spin_unlock(&dev->lock);
+}
+EXPORT_SYMBOL_GPL(unregister_switch);
+
+
+static int __init
+swconfig_init(void)
+{
+	int i, err;
+
+	INIT_LIST_HEAD(&swdevs);
+	err = genl_register_family(&switch_fam);
+	if (err)
+		return err;
+
+	for (i = 0; i < ARRAY_SIZE(swconfig_ops); i++) {
+		err = genl_register_ops(&switch_fam, &swconfig_ops[i]);
+		if (err)
+			goto unregister;
+	}
+
+	return 0;
+
+unregister:
+	genl_unregister_family(&switch_fam);
+	return err;
+}
+
+static void __exit
+swconfig_exit(void)
+{
+	genl_unregister_family(&switch_fam);
+}
+
+module_init(swconfig_init);
+module_exit(swconfig_exit);
+
diff --git a/target/linux/generic/files/drivers/pwm/Kconfig b/target/linux/generic/files/drivers/pwm/Kconfig
new file mode 100644
index 0000000000..1c24e11077
--- /dev/null
+++ b/target/linux/generic/files/drivers/pwm/Kconfig
@@ -0,0 +1,31 @@
+#
+# PWM infrastructure and devices
+#
+
+menuconfig GENERIC_PWM
+	tristate "PWM Support"
+	depends on SYSFS
+	help
+	  This enables PWM support through the generic PWM library.
+	  If unsure, say N.
+
+if GENERIC_PWM
+
+config ATMEL_PWM
+	tristate "Atmel AT32/AT91 PWM support"
+	depends on AVR32 || ARCH_AT91
+	help
+	  This option enables device driver support for the PWMC
+	  peripheral channels found on certain Atmel processors.
+	  Pulse Width Modulation is used many for purposes, including
+	  software controlled power-efficient backlights on LCD
+	  displays, motor control, and waveform generation.  If
+	  unsure, say N.
+
+config GPIO_PWM
+       tristate "PWM emulation using GPIO"
+       help
+         This option enables a single-channel PWM device using
+	 a kernel interval timer and a GPIO pin.  If unsure, say N.
+
+endif
diff --git a/target/linux/generic/files/drivers/pwm/Makefile b/target/linux/generic/files/drivers/pwm/Makefile
new file mode 100644
index 0000000000..e8cacc5740
--- /dev/null
+++ b/target/linux/generic/files/drivers/pwm/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for pwm devices
+#
+obj-y := pwm.o
+obj-$(CONFIG_ATMEL_PWM)		+= atmel-pwm.o
+obj-$(CONFIG_GPIO_PWM)		+= gpio.o
diff --git a/target/linux/generic/files/drivers/pwm/atmel-pwm.c b/target/linux/generic/files/drivers/pwm/atmel-pwm.c
new file mode 100644
index 0000000000..158bb922c1
--- /dev/null
+++ b/target/linux/generic/files/drivers/pwm/atmel-pwm.c
@@ -0,0 +1,592 @@
+/*
+ * drivers/pwm/atmel-pwm.c
+ *
+ * Copyright (C) 2010 Bill Gatliff <bgat@billgatliff.com>
+ * Copyright (C) 2007 David Brownell
+ *
+ * This program is free software; you may redistribute and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/pwm/pwm.h>
+
+enum {
+	/* registers common to the PWMC peripheral */
+	PWMC_MR = 0,
+	PWMC_ENA = 4,
+	PWMC_DIS = 8,
+	PWMC_SR = 0xc,
+	PWMC_IER = 0x10,
+	PWMC_IDR = 0x14,
+	PWMC_IMR = 0x18,
+	PWMC_ISR = 0x1c,
+
+	/* registers per each PWMC channel */
+	PWMC_CMR = 0,
+	PWMC_CDTY = 4,
+	PWMC_CPRD = 8,
+	PWMC_CCNT = 0xc,
+	PWMC_CUPD = 0x10,
+
+	/* how to find each channel */
+	PWMC_CHAN_BASE = 0x200,
+	PWMC_CHAN_STRIDE = 0x20,
+
+	/* CMR bits of interest */
+	PWMC_CMR_CPD = 10,
+	PWMC_CMR_CPOL = 9,
+	PWMC_CMR_CALG = 8,
+	PWMC_CMR_CPRE_MASK = 0xf,
+};
+
+struct atmel_pwm {
+	struct pwm_device pwm;
+	spinlock_t lock;
+	void __iomem *iobase;
+	struct clk *clk;
+	u32 *sync_mask;
+	int irq;
+	u32 ccnt_mask;
+};
+
+static inline struct atmel_pwm *to_atmel_pwm(const struct pwm_channel *p)
+{
+	return container_of(p->pwm, struct atmel_pwm, pwm);
+}
+
+static inline void
+pwmc_writel(const struct atmel_pwm *p,
+	    unsigned offset, u32 val)
+{
+	__raw_writel(val, p->iobase + offset);
+}
+
+static inline u32
+pwmc_readl(const struct atmel_pwm *p,
+	   unsigned offset)
+{
+	return __raw_readl(p->iobase + offset);
+}
+
+static inline void
+pwmc_chan_writel(const struct pwm_channel *p,
+		 u32 offset, u32 val)
+{
+	const struct atmel_pwm *ap = to_atmel_pwm(p);
+
+	if (PWMC_CMR == offset)
+		val &= ((1 << PWMC_CMR_CPD)
+			| (1 << PWMC_CMR_CPOL)
+			| (1 << PWMC_CMR_CALG)
+			| (PWMC_CMR_CPRE_MASK));
+	else
+		val &= ap->ccnt_mask;
+
+	pwmc_writel(ap, offset + PWMC_CHAN_BASE
+		    + (p->chan * PWMC_CHAN_STRIDE), val);
+}
+
+static inline u32
+pwmc_chan_readl(const struct pwm_channel *p,
+		u32 offset)
+{
+	const struct atmel_pwm *ap = to_atmel_pwm(p);
+
+	return pwmc_readl(ap, offset + PWMC_CHAN_BASE
+			  + (p->chan * PWMC_CHAN_STRIDE));
+}
+
+static inline int
+__atmel_pwm_is_on(struct pwm_channel *p)
+{
+	struct atmel_pwm *ap = to_atmel_pwm(p);
+	return (pwmc_readl(ap, PWMC_SR) & (1 << p->chan)) ? 1 : 0;
+}
+
+static inline void
+__atmel_pwm_unsynchronize(struct pwm_channel *p,
+			  struct pwm_channel *to_p)
+{
+	const struct atmel_pwm *ap = to_atmel_pwm(p);
+	int wchan;
+
+	if (to_p) {
+		ap->sync_mask[p->chan] &= ~(1 << to_p->chan);
+		ap->sync_mask[to_p->chan] &= ~(1 << p->chan);
+		goto done;
+	}
+
+	ap->sync_mask[p->chan] = 0;
+	for (wchan = 0; wchan < ap->pwm.nchan; wchan++)
+		ap->sync_mask[wchan] &= ~(1 << p->chan);
+done:
+	dev_dbg(p->pwm->dev, "sync_mask %x\n", ap->sync_mask[p->chan]);
+}
+
+static inline void
+__atmel_pwm_synchronize(struct pwm_channel *p,
+			struct pwm_channel *to_p)
+{
+	const struct atmel_pwm *ap = to_atmel_pwm(p);
+
+	if (!to_p)
+		return;
+
+	ap->sync_mask[p->chan] |= (1 << to_p->chan);
+	ap->sync_mask[to_p->chan] |= (1 << p->chan);
+
+	dev_dbg(p->pwm->dev, "sync_mask %x\n", ap->sync_mask[p->chan]);
+}
+
+static inline void
+__atmel_pwm_stop(struct pwm_channel *p)
+{
+	struct atmel_pwm *ap = to_atmel_pwm(p);
+	u32 chid = 1 << p->chan;
+
+	pwmc_writel(ap, PWMC_DIS, ap->sync_mask[p->chan] | chid);
+}
+
+static inline void
+__atmel_pwm_start(struct pwm_channel *p)
+{
+	struct atmel_pwm *ap = to_atmel_pwm(p);
+	u32 chid = 1 << p->chan;
+
+	pwmc_writel(ap, PWMC_ENA, ap->sync_mask[p->chan] | chid);
+}
+
+static int
+atmel_pwm_synchronize(struct pwm_channel *p,
+		      struct pwm_channel *to_p)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&p->lock, flags);
+	__atmel_pwm_synchronize(p, to_p);
+	spin_unlock_irqrestore(&p->lock, flags);
+	return 0;
+}
+
+static int
+atmel_pwm_unsynchronize(struct pwm_channel *p,
+			struct pwm_channel *from_p)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&p->lock, flags);
+	__atmel_pwm_unsynchronize(p, from_p);
+	spin_unlock_irqrestore(&p->lock, flags);
+	return 0;
+}
+
+static inline int
+__atmel_pwm_config_polarity(struct pwm_channel *p,
+			    struct pwm_channel_config *c)
+{
+	u32 cmr = pwmc_chan_readl(p, PWMC_CMR);
+
+	if (c->polarity)
+		cmr &= ~BIT(PWMC_CMR_CPOL);
+	else
+		cmr |= BIT(PWMC_CMR_CPOL);
+	pwmc_chan_writel(p, PWMC_CMR, cmr);
+	p->active_high = c->polarity ? 1 : 0;
+
+	dev_dbg(p->pwm->dev, "polarity %d\n", c->polarity);
+	return 0;
+}
+
+static inline int
+__atmel_pwm_config_duty_ticks(struct pwm_channel *p,
+			      struct pwm_channel_config *c)
+{
+	u32 cmr, cprd, cpre, cdty;
+
+	cmr = pwmc_chan_readl(p, PWMC_CMR);
+	cprd = pwmc_chan_readl(p, PWMC_CPRD);
+
+	cpre = cmr & PWMC_CMR_CPRE_MASK;
+	cmr &= ~BIT(PWMC_CMR_CPD);
+
+	cdty = cprd - (c->duty_ticks >> cpre);
+
+	p->duty_ticks = c->duty_ticks;
+
+	if (__atmel_pwm_is_on(p)) {
+		pwmc_chan_writel(p, PWMC_CMR, cmr);
+		pwmc_chan_writel(p, PWMC_CUPD, cdty);
+	} else
+		pwmc_chan_writel(p, PWMC_CDTY, cdty);
+
+	dev_dbg(p->pwm->dev, "duty_ticks = %lu cprd = %x"
+		" cdty = %x cpre = %x\n", p->duty_ticks,
+		cprd, cdty, cpre);
+
+	return 0;
+}
+
+static inline int
+__atmel_pwm_config_period_ticks(struct pwm_channel *p,
+				struct pwm_channel_config *c)
+{
+	u32 cmr, cprd, cpre;
+
+	cpre = fls(c->period_ticks);
+	if (cpre < 16)
+		cpre = 0;
+	else {
+		cpre -= 15;
+		if (cpre > 10)
+			return -EINVAL;
+	}
+
+	cmr = pwmc_chan_readl(p, PWMC_CMR);
+	cmr &= ~PWMC_CMR_CPRE_MASK;
+	cmr |= cpre;
+
+	cprd = c->period_ticks >> cpre;
+
+	pwmc_chan_writel(p, PWMC_CMR, cmr);
+	pwmc_chan_writel(p, PWMC_CPRD, cprd);
+	p->period_ticks = c->period_ticks;
+
+	dev_dbg(p->pwm->dev, "period_ticks = %lu cprd = %x cpre = %x\n",
+		 p->period_ticks, cprd, cpre);
+
+	return 0;
+}
+
+static int
+atmel_pwm_config_nosleep(struct pwm_channel *p,
+			 struct pwm_channel_config *c)
+{
+	int ret = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&p->lock, flags);
+
+	switch (c->config_mask) {
+
+	case PWM_CONFIG_DUTY_TICKS:
+		__atmel_pwm_config_duty_ticks(p, c);
+		break;
+
+	case PWM_CONFIG_STOP:
+		__atmel_pwm_stop(p);
+		break;
+
+	case PWM_CONFIG_START:
+		__atmel_pwm_start(p);
+		break;
+
+	case PWM_CONFIG_POLARITY:
+		__atmel_pwm_config_polarity(p, c);
+		break;
+
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	spin_unlock_irqrestore(&p->lock, flags);
+	return ret;
+}
+
+static int
+atmel_pwm_stop_sync(struct pwm_channel *p)
+{
+	struct atmel_pwm *ap = container_of(p->pwm, struct atmel_pwm, pwm);
+	int ret;
+	int was_on = __atmel_pwm_is_on(p);
+
+	if (was_on) {
+		do {
+			init_completion(&p->complete);
+			set_bit(FLAG_STOP, &p->flags);
+			pwmc_writel(ap, PWMC_IER, 1 << p->chan);
+
+			dev_dbg(p->pwm->dev, "waiting on stop_sync completion...\n");
+
+			ret = wait_for_completion_interruptible(&p->complete);
+
+			dev_dbg(p->pwm->dev, "stop_sync complete (%d)\n", ret);
+
+			if (ret)
+				return ret;
+		} while (p->flags & BIT(FLAG_STOP));
+	}
+
+	return was_on;
+}
+
+static int
+atmel_pwm_config(struct pwm_channel *p,
+		 struct pwm_channel_config *c)
+{
+	int was_on = 0;
+
+	if (p->pwm->config_nosleep) {
+		if (!p->pwm->config_nosleep(p, c))
+			return 0;
+	}
+
+	might_sleep();
+
+	dev_dbg(p->pwm->dev, "config_mask %x\n", c->config_mask);
+
+	was_on = atmel_pwm_stop_sync(p);
+	if (was_on < 0)
+		return was_on;
+
+	if (c->config_mask & PWM_CONFIG_PERIOD_TICKS) {
+		__atmel_pwm_config_period_ticks(p, c);
+		if (!(c->config_mask & PWM_CONFIG_DUTY_TICKS)) {
+			struct pwm_channel_config d = {
+				.config_mask = PWM_CONFIG_DUTY_TICKS,
+				.duty_ticks = p->duty_ticks,
+			};
+			__atmel_pwm_config_duty_ticks(p, &d);
+		}
+	}
+
+	if (c->config_mask & PWM_CONFIG_DUTY_TICKS)
+		__atmel_pwm_config_duty_ticks(p, c);
+
+	if (c->config_mask & PWM_CONFIG_POLARITY)
+		__atmel_pwm_config_polarity(p, c);
+
+	if ((c->config_mask & PWM_CONFIG_START)
+	    || (was_on && !(c->config_mask & PWM_CONFIG_STOP)))
+		__atmel_pwm_start(p);
+
+	return 0;
+}
+
+static void
+__atmel_pwm_set_callback(struct pwm_channel *p,
+			 pwm_callback_t callback)
+{
+	struct atmel_pwm *ap = container_of(p->pwm, struct atmel_pwm, pwm);
+
+	p->callback = callback;
+	pwmc_writel(ap, p->callback ? PWMC_IER : PWMC_IDR, 1 << p->chan);
+}
+
+static int
+atmel_pwm_set_callback(struct pwm_channel *p,
+		       pwm_callback_t callback)
+{
+	struct atmel_pwm *ap = to_atmel_pwm(p);
+	unsigned long flags;
+
+	spin_lock_irqsave(&ap->lock, flags);
+	__atmel_pwm_set_callback(p, callback);
+	spin_unlock_irqrestore(&ap->lock, flags);
+
+	return 0;
+}
+
+static int
+atmel_pwm_request(struct pwm_channel *p)
+{
+	struct atmel_pwm *ap = to_atmel_pwm(p);
+	unsigned long flags;
+
+	spin_lock_irqsave(&p->lock, flags);
+	clk_enable(ap->clk);
+	p->tick_hz = clk_get_rate(ap->clk);
+	__atmel_pwm_unsynchronize(p, NULL);
+	__atmel_pwm_stop(p);
+	spin_unlock_irqrestore(&p->lock, flags);
+
+	return 0;
+}
+
+static void
+atmel_pwm_free(struct pwm_channel *p)
+{
+	struct atmel_pwm *ap = to_atmel_pwm(p);
+	clk_disable(ap->clk);
+}
+
+static irqreturn_t
+atmel_pwmc_irq(int irq, void *data)
+{
+	struct atmel_pwm *ap = data;
+	struct pwm_channel *p;
+	u32 isr;
+	int chid;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ap->lock, flags);
+
+	isr = pwmc_readl(ap, PWMC_ISR);
+	for (chid = 0; isr; chid++, isr >>= 1) {
+		p = &ap->pwm.channels[chid];
+		if (isr & 1) {
+			if (p->callback)
+				p->callback(p);
+			if (p->flags & BIT(FLAG_STOP)) {
+				__atmel_pwm_stop(p);
+				clear_bit(FLAG_STOP, &p->flags);
+			}
+			complete_all(&p->complete);
+		}
+	}
+
+	spin_unlock_irqrestore(&ap->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit
+atmel_pwmc_probe(struct platform_device *pdev)
+{
+	struct atmel_pwm *ap;
+	struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	int ret = 0;
+
+	ap = kzalloc(sizeof(*ap), GFP_KERNEL);
+	if (!ap) {
+		ret = -ENOMEM;
+		goto err_atmel_pwm_alloc;
+	}
+
+	spin_lock_init(&ap->lock);
+	platform_set_drvdata(pdev, ap);
+
+	ap->pwm.dev = &pdev->dev;
+	ap->pwm.bus_id = dev_name(&pdev->dev);
+
+	ap->pwm.nchan = 4; /* TODO: true only for SAM9263 and AP7000 */
+	ap->ccnt_mask = 0xffffUL; /* TODO: true only for SAM9263 */
+
+	ap->sync_mask = kzalloc(ap->pwm.nchan * sizeof(u32), GFP_KERNEL);
+	if (!ap->sync_mask) {
+		ret = -ENOMEM;
+		goto err_alloc_sync_masks;
+	}
+
+	ap->pwm.owner = THIS_MODULE;
+	ap->pwm.request = atmel_pwm_request;
+	ap->pwm.free = atmel_pwm_free;
+	ap->pwm.config_nosleep = atmel_pwm_config_nosleep;
+	ap->pwm.config = atmel_pwm_config;
+	ap->pwm.synchronize = atmel_pwm_synchronize;
+	ap->pwm.unsynchronize = atmel_pwm_unsynchronize;
+	ap->pwm.set_callback = atmel_pwm_set_callback;
+
+	ap->clk = clk_get(&pdev->dev, "pwm_clk");
+	if (PTR_ERR(ap->clk)) {
+		ret = -ENODEV;
+		goto err_clk_get;
+	}
+
+	ap->iobase = ioremap_nocache(r->start, r->end - r->start + 1);
+	if (!ap->iobase) {
+		ret = -ENODEV;
+		goto err_ioremap;
+	}
+
+	clk_enable(ap->clk);
+	pwmc_writel(ap, PWMC_DIS, -1);
+	pwmc_writel(ap, PWMC_IDR, -1);
+	clk_disable(ap->clk);
+
+	ap->irq = platform_get_irq(pdev, 0);
+	if (ap->irq != -ENXIO) {
+		ret = request_irq(ap->irq, atmel_pwmc_irq, 0,
+				  ap->pwm.bus_id, ap);
+		if (ret)
+			goto err_request_irq;
+	}
+
+	ret = pwm_register(&ap->pwm);
+	if (ret)
+		goto err_pwm_register;
+
+	return 0;
+
+err_pwm_register:
+	if (ap->irq != -ENXIO)
+		free_irq(ap->irq, ap);
+err_request_irq:
+	iounmap(ap->iobase);
+err_ioremap:
+	clk_put(ap->clk);
+err_clk_get:
+	platform_set_drvdata(pdev, NULL);
+err_alloc_sync_masks:
+	kfree(ap);
+err_atmel_pwm_alloc:
+	return ret;
+}
+
+static int __devexit
+atmel_pwmc_remove(struct platform_device *pdev)
+{
+	struct atmel_pwm *ap = platform_get_drvdata(pdev);
+	int ret;
+
+	/* TODO: what can we do if this fails? */
+	ret = pwm_unregister(&ap->pwm);
+
+	clk_enable(ap->clk);
+	pwmc_writel(ap, PWMC_IDR, -1);
+	pwmc_writel(ap, PWMC_DIS, -1);
+	clk_disable(ap->clk);
+
+	if (ap->irq != -ENXIO)
+		free_irq(ap->irq, ap);
+
+	clk_put(ap->clk);
+	iounmap(ap->iobase);
+
+	kfree(ap);
+
+	return 0;
+}
+
+static struct platform_driver atmel_pwm_driver = {
+	.driver = {
+		.name = "atmel_pwmc",
+		.owner = THIS_MODULE,
+	},
+	.probe = atmel_pwmc_probe,
+	.remove = __devexit_p(atmel_pwmc_remove),
+};
+
+static int __init atmel_pwm_init(void)
+{
+	return platform_driver_register(&atmel_pwm_driver);
+}
+module_init(atmel_pwm_init);
+
+static void __exit atmel_pwm_exit(void)
+{
+	platform_driver_unregister(&atmel_pwm_driver);
+}
+module_exit(atmel_pwm_exit);
+
+MODULE_AUTHOR("Bill Gatliff <bgat@billgatliff.com>");
+MODULE_DESCRIPTION("Driver for Atmel PWMC peripheral");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:atmel_pwmc");
diff --git a/target/linux/generic/files/drivers/pwm/gpio.c b/target/linux/generic/files/drivers/pwm/gpio.c
new file mode 100644
index 0000000000..dff5d1d627
--- /dev/null
+++ b/target/linux/generic/files/drivers/pwm/gpio.c
@@ -0,0 +1,298 @@
+/*
+ * drivers/pwm/gpio.c
+ *
+ * Models a single-channel PWM device using a timer and a GPIO pin.
+ *
+ * Copyright (C) 2010 Bill Gatliff <bgat@billgatliff.com>
+ *
+ * This program is free software; you may redistribute and/or modify
+ * it under the terms of the GNU General Public License Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/hrtimer.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/pwm/pwm.h>
+
+struct gpio_pwm {
+	struct pwm_device pwm;
+	struct hrtimer timer;
+	struct work_struct work;
+	pwm_callback_t callback;
+	int gpio;
+	unsigned long polarity : 1;
+	unsigned long active : 1;
+};
+
+static inline struct gpio_pwm *to_gpio_pwm(const struct pwm_channel *p)
+{
+	return container_of(p->pwm, struct gpio_pwm, pwm);
+}
+
+static void
+gpio_pwm_work (struct work_struct *work)
+{
+	struct gpio_pwm *gp = container_of(work, struct gpio_pwm, work);
+
+	if (gp->active)
+		gpio_direction_output(gp->gpio, gp->polarity ? 1 : 0);
+	else
+		gpio_direction_output(gp->gpio, gp->polarity ? 0 : 1);
+}
+
+static enum hrtimer_restart
+gpio_pwm_timeout(struct hrtimer *t)
+{
+	struct gpio_pwm *gp = container_of(t, struct gpio_pwm, timer);
+	ktime_t tnew;
+
+	if (unlikely(gp->pwm.channels[0].duty_ticks == 0))
+		gp->active = 0;
+	else if (unlikely(gp->pwm.channels[0].duty_ticks
+			  == gp->pwm.channels[0].period_ticks))
+		gp->active = 1;
+	else
+		gp->active ^= 1;
+
+	if (gpio_cansleep(gp->gpio))
+		schedule_work(&gp->work);
+	else
+		gpio_pwm_work(&gp->work);
+
+	if (!gp->active && gp->pwm.channels[0].callback)
+		gp->pwm.channels[0].callback(&gp->pwm.channels[0]);
+
+	if (unlikely(!gp->active &&
+		     (gp->pwm.channels[0].flags & BIT(FLAG_STOP)))) {
+		clear_bit(FLAG_STOP, &gp->pwm.channels[0].flags);
+		complete_all(&gp->pwm.channels[0].complete);
+		return HRTIMER_NORESTART;
+	}
+
+	if (gp->active)
+		tnew = ktime_set(0, gp->pwm.channels[0].duty_ticks);
+	else
+		tnew = ktime_set(0, gp->pwm.channels[0].period_ticks
+				 - gp->pwm.channels[0].duty_ticks);
+	hrtimer_start(&gp->timer, tnew, HRTIMER_MODE_REL);
+
+	return HRTIMER_NORESTART;
+}
+
+static void gpio_pwm_start(struct pwm_channel *p)
+{
+	struct gpio_pwm *gp = to_gpio_pwm(p);
+
+	gp->active = 0;
+	gpio_pwm_timeout(&gp->timer);
+}
+
+static int
+gpio_pwm_config_nosleep(struct pwm_channel *p,
+			struct pwm_channel_config *c)
+{
+	struct gpio_pwm *gp = to_gpio_pwm(p);
+	int ret = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&p->lock, flags);
+
+	switch (c->config_mask) {
+
+	case PWM_CONFIG_DUTY_TICKS:
+		p->duty_ticks = c->duty_ticks;
+		break;
+
+	case PWM_CONFIG_START:
+		if (!hrtimer_active(&gp->timer)) {
+			gpio_pwm_start(p);
+		}
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	spin_unlock_irqrestore(&p->lock, flags);
+	return ret;
+}
+
+static int
+gpio_pwm_stop_sync(struct pwm_channel *p)
+{
+	struct gpio_pwm *gp = to_gpio_pwm(p);
+	int ret;
+	int was_on = hrtimer_active(&gp->timer);
+
+	if (was_on) {
+		do {
+			init_completion(&p->complete);
+			set_bit(FLAG_STOP, &p->flags);
+			ret = wait_for_completion_interruptible(&p->complete);
+			if (ret)
+				return ret;
+		} while (p->flags & BIT(FLAG_STOP));
+	}
+
+	return was_on;
+}
+
+static int
+gpio_pwm_config(struct pwm_channel *p,
+		struct pwm_channel_config *c)
+{
+	struct gpio_pwm *gp = to_gpio_pwm(p);
+	int was_on = 0;
+
+	if (p->pwm->config_nosleep) {
+		if (!p->pwm->config_nosleep(p, c))
+			return 0;
+	}
+
+	might_sleep();
+
+	was_on = gpio_pwm_stop_sync(p);
+	if (was_on < 0)
+		return was_on;
+
+	if (c->config_mask & PWM_CONFIG_PERIOD_TICKS)
+		p->period_ticks = c->period_ticks;
+
+	if (c->config_mask & PWM_CONFIG_DUTY_TICKS)
+		p->duty_ticks = c->duty_ticks;
+
+	if (c->config_mask & PWM_CONFIG_POLARITY) {
+		gp->polarity = c->polarity ? 1 : 0;
+		p->active_high = gp->polarity;
+	}
+
+	if ((c->config_mask & PWM_CONFIG_START)
+	    || (was_on && !(c->config_mask & PWM_CONFIG_STOP)))
+		gpio_pwm_start(p);
+
+	return 0;
+}
+
+static int
+gpio_pwm_set_callback(struct pwm_channel *p,
+		      pwm_callback_t callback)
+{
+	struct gpio_pwm *gp = to_gpio_pwm(p);
+	gp->callback = callback;
+	return 0;
+}
+
+static int
+gpio_pwm_request(struct pwm_channel *p)
+{
+	p->tick_hz = 1000000000UL;
+	return 0;
+}
+
+static int __devinit
+gpio_pwm_probe(struct platform_device *pdev)
+{
+	struct gpio_pwm *gp;
+	struct gpio_pwm_platform_data *gpd = pdev->dev.platform_data;
+	int ret = 0;
+
+	/* TODO: create configfs entries, so users can assign GPIOs to
+	 * PWMs at runtime instead of creating a platform_device
+	 * specification and rebuilding their kernel */
+
+	if (!gpd || gpio_request(gpd->gpio, dev_name(&pdev->dev)))
+		return -EINVAL;
+
+	gp = kzalloc(sizeof(*gp), GFP_KERNEL);
+	if (!gp) {
+		ret = -ENOMEM;
+		goto err_alloc;
+	}
+
+	platform_set_drvdata(pdev, gp);
+
+	gp->pwm.dev = &pdev->dev;
+	gp->pwm.bus_id = dev_name(&pdev->dev);
+	gp->pwm.nchan = 1;
+	gp->gpio = gpd->gpio;
+
+	INIT_WORK(&gp->work, gpio_pwm_work);
+
+	hrtimer_init(&gp->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	gp->timer.function = gpio_pwm_timeout;
+
+	gp->pwm.owner = THIS_MODULE;
+	gp->pwm.config_nosleep = gpio_pwm_config_nosleep;
+	gp->pwm.config = gpio_pwm_config;
+	gp->pwm.request = gpio_pwm_request;
+	gp->pwm.set_callback = gpio_pwm_set_callback;
+
+	ret = pwm_register(&gp->pwm);
+	if (ret)
+		goto err_pwm_register;
+
+	return 0;
+
+err_pwm_register:
+	platform_set_drvdata(pdev, 0);
+	kfree(gp);
+err_alloc:
+	return ret;
+}
+
+static int __devexit
+gpio_pwm_remove(struct platform_device *pdev)
+{
+	struct gpio_pwm *gp = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = pwm_unregister(&gp->pwm);
+	hrtimer_cancel(&gp->timer);
+	cancel_work_sync(&gp->work);
+	platform_set_drvdata(pdev, 0);
+	kfree(gp);
+
+	return 0;
+}
+
+static struct platform_driver gpio_pwm_driver = {
+	.driver = {
+		.name = "gpio_pwm",
+		.owner = THIS_MODULE,
+	},
+	.probe = gpio_pwm_probe,
+	.remove = __devexit_p(gpio_pwm_remove),
+};
+
+static int __init gpio_pwm_init(void)
+{
+	return platform_driver_register(&gpio_pwm_driver);
+}
+module_init(gpio_pwm_init);
+
+static void __exit gpio_pwm_exit(void)
+{
+	platform_driver_unregister(&gpio_pwm_driver);
+}
+module_exit(gpio_pwm_exit);
+
+MODULE_AUTHOR("Bill Gatliff <bgat@billgatliff.com>");
+MODULE_DESCRIPTION("PWM output using GPIO and a high-resolution timer");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:gpio_pwm");
diff --git a/target/linux/generic/files/drivers/pwm/pwm.c b/target/linux/generic/files/drivers/pwm/pwm.c
new file mode 100644
index 0000000000..c1596e9e7e
--- /dev/null
+++ b/target/linux/generic/files/drivers/pwm/pwm.c
@@ -0,0 +1,643 @@
+/*
+ * drivers/pwm/pwm.c
+ *
+ * Copyright (C) 2010 Bill Gatliff <bgat@billgatliff.com>
+ *
+ * This program is free software; you may redistribute and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/fs.h>
+#include <linux/completion.h>
+#include <linux/workqueue.h>
+#include <linux/list.h>
+#include <linux/sched.h>
+#include <linux/slab.h>    /*kcalloc, kfree since 2.6.34 */
+#include <linux/pwm/pwm.h>
+
+static int __pwm_create_sysfs(struct pwm_device *pwm);
+
+static const char *REQUEST_SYSFS = "sysfs";
+static LIST_HEAD(pwm_device_list);
+static DEFINE_MUTEX(device_list_mutex);
+static struct class pwm_class;
+static struct workqueue_struct *pwm_handler_workqueue;
+
+int pwm_register(struct pwm_device *pwm)
+{
+	struct pwm_channel *p;
+	int wchan;
+	int ret;
+
+	spin_lock_init(&pwm->list_lock);
+
+	p = kcalloc(pwm->nchan, sizeof(*p), GFP_KERNEL);
+	if (!p)
+		return -ENOMEM;
+
+	for (wchan = 0; wchan < pwm->nchan; wchan++) {
+		spin_lock_init(&p[wchan].lock);
+		init_completion(&p[wchan].complete);
+		p[wchan].chan = wchan;
+		p[wchan].pwm = pwm;
+	}
+
+	pwm->channels = p;
+
+	mutex_lock(&device_list_mutex);
+
+	list_add_tail(&pwm->list, &pwm_device_list);
+	ret = __pwm_create_sysfs(pwm);
+	if (ret) {
+		mutex_unlock(&device_list_mutex);
+		goto err_create_sysfs;
+	}
+
+	mutex_unlock(&device_list_mutex);
+
+	dev_info(pwm->dev, "%d channel%s\n", pwm->nchan,
+		 pwm->nchan > 1 ? "s" : "");
+	return 0;
+
+err_create_sysfs:
+	kfree(p);
+
+	return ret;
+}
+EXPORT_SYMBOL(pwm_register);
+
+static int __match_device(struct device *dev, void *data)
+{
+	return dev_get_drvdata(dev) == data;
+}
+
+int pwm_unregister(struct pwm_device *pwm)
+{
+	int wchan;
+	struct device *dev;
+
+	mutex_lock(&device_list_mutex);
+
+	for (wchan = 0; wchan < pwm->nchan; wchan++) {
+	  if (pwm->channels[wchan].flags & BIT(FLAG_REQUESTED)) {
+			mutex_unlock(&device_list_mutex);
+			return -EBUSY;
+		}
+	}
+
+	for (wchan = 0; wchan < pwm->nchan; wchan++) {
+		dev = class_find_device(&pwm_class, NULL,
+					&pwm->channels[wchan],
+					__match_device);
+		if (dev) {
+			put_device(dev);
+			device_unregister(dev);
+		}
+	}
+
+	kfree(pwm->channels);
+	list_del(&pwm->list);
+	mutex_unlock(&device_list_mutex);
+
+	return 0;
+}
+EXPORT_SYMBOL(pwm_unregister);
+
+static struct pwm_device *
+__pwm_find_device(const char *bus_id)
+{
+	struct pwm_device *p;
+
+	list_for_each_entry(p, &pwm_device_list, list) {
+		if (!strcmp(bus_id, p->bus_id))
+			return p;
+	}
+	return NULL;
+}
+
+static int
+__pwm_request_channel(struct pwm_channel *p,
+		      const char *requester)
+{
+	int ret;
+
+	if (test_and_set_bit(FLAG_REQUESTED, &p->flags))
+		return -EBUSY;
+
+	if (p->pwm->request) {
+		ret = p->pwm->request(p);
+		if (ret) {
+			clear_bit(FLAG_REQUESTED, &p->flags);
+			return ret;
+		}
+	}
+
+	p->requester = requester;
+	if (!strcmp(requester, REQUEST_SYSFS))
+		p->pid = current->pid;
+
+	return 0;
+}
+
+struct pwm_channel *
+pwm_request(const char *bus_id,
+	    int chan,
+	    const char *requester)
+{
+	struct pwm_device *p;
+	int ret;
+
+	mutex_lock(&device_list_mutex);
+
+	p = __pwm_find_device(bus_id);
+	if (!p || chan >= p->nchan)
+		goto err_no_device;
+
+	if (!try_module_get(p->owner))
+		goto err_module_get_failed;
+
+	ret = __pwm_request_channel(&p->channels[chan], requester);
+	if (ret)
+		goto err_request_failed;
+
+	mutex_unlock(&device_list_mutex);
+	return &p->channels[chan];
+
+err_request_failed:
+	module_put(p->owner);
+err_module_get_failed:
+err_no_device:
+	mutex_unlock(&device_list_mutex);
+	return NULL;
+}
+EXPORT_SYMBOL(pwm_request);
+
+void pwm_free(struct pwm_channel *p)
+{
+	mutex_lock(&device_list_mutex);
+
+	if (!test_and_clear_bit(FLAG_REQUESTED, &p->flags))
+		goto done;
+
+	pwm_stop(p);
+	pwm_unsynchronize(p, NULL);
+	pwm_set_handler(p, NULL, NULL);
+
+	if (p->pwm->free)
+		p->pwm->free(p);
+	module_put(p->pwm->owner);
+done:
+	mutex_unlock(&device_list_mutex);
+}
+EXPORT_SYMBOL(pwm_free);
+
+unsigned long pwm_ns_to_ticks(struct pwm_channel *p,
+			      unsigned long nsecs)
+{
+	unsigned long long ticks;
+
+	ticks = nsecs;
+	ticks *= p->tick_hz;
+	do_div(ticks, 1000000000);
+	return ticks;
+}
+EXPORT_SYMBOL(pwm_ns_to_ticks);
+
+unsigned long pwm_ticks_to_ns(struct pwm_channel *p,
+			      unsigned long ticks)
+{
+	unsigned long long ns;
+
+	if (!p->tick_hz)
+		return 0;
+
+	ns = ticks;
+	ns *= 1000000000UL;
+	do_div(ns, p->tick_hz);
+	return ns;
+}
+EXPORT_SYMBOL(pwm_ticks_to_ns);
+
+static void
+pwm_config_ns_to_ticks(struct pwm_channel *p,
+		       struct pwm_channel_config *c)
+{
+	if (c->config_mask & PWM_CONFIG_PERIOD_NS) {
+		c->period_ticks = pwm_ns_to_ticks(p, c->period_ns);
+		c->config_mask &= ~PWM_CONFIG_PERIOD_NS;
+		c->config_mask |= PWM_CONFIG_PERIOD_TICKS;
+	}
+
+	if (c->config_mask & PWM_CONFIG_DUTY_NS) {
+		c->duty_ticks = pwm_ns_to_ticks(p, c->duty_ns);
+		c->config_mask &= ~PWM_CONFIG_DUTY_NS;
+		c->config_mask |= PWM_CONFIG_DUTY_TICKS;
+	}
+}
+
+static void
+pwm_config_percent_to_ticks(struct pwm_channel *p,
+			    struct pwm_channel_config *c)
+{
+	if (c->config_mask & PWM_CONFIG_DUTY_PERCENT) {
+		if (c->config_mask & PWM_CONFIG_PERIOD_TICKS)
+			c->duty_ticks = c->period_ticks;
+		else
+			c->duty_ticks = p->period_ticks;
+
+		c->duty_ticks *= c->duty_percent;
+		c->duty_ticks /= 100;
+		c->config_mask &= ~PWM_CONFIG_DUTY_PERCENT;
+		c->config_mask |= PWM_CONFIG_DUTY_TICKS;
+	}
+}
+
+int pwm_config_nosleep(struct pwm_channel *p,
+		       struct pwm_channel_config *c)
+{
+	if (!p->pwm->config_nosleep)
+		return -EINVAL;
+
+	pwm_config_ns_to_ticks(p, c);
+	pwm_config_percent_to_ticks(p, c);
+
+	return p->pwm->config_nosleep(p, c);
+}
+EXPORT_SYMBOL(pwm_config_nosleep);
+
+int pwm_config(struct pwm_channel *p,
+	       struct pwm_channel_config *c)
+{
+	int ret = 0;
+
+	if (unlikely(!p->pwm->config))
+		return -EINVAL;
+
+	pwm_config_ns_to_ticks(p, c);
+	pwm_config_percent_to_ticks(p, c);
+
+	switch (c->config_mask & (PWM_CONFIG_PERIOD_TICKS
+				  | PWM_CONFIG_DUTY_TICKS)) {
+	case PWM_CONFIG_PERIOD_TICKS:
+		if (p->duty_ticks > c->period_ticks) {
+			ret = -EINVAL;
+			goto err;
+		}
+		break;
+	case PWM_CONFIG_DUTY_TICKS:
+		if (p->period_ticks < c->duty_ticks) {
+			ret = -EINVAL;
+			goto err;
+		}
+		break;
+	case PWM_CONFIG_DUTY_TICKS | PWM_CONFIG_PERIOD_TICKS:
+		if (c->duty_ticks > c->period_ticks) {
+			ret = -EINVAL;
+			goto err;
+		}
+		break;
+	default:
+		break;
+	}
+
+err:
+	dev_dbg(p->pwm->dev, "%s: config_mask %d period_ticks %lu duty_ticks %lu"
+		" polarity %d duty_ns %lu period_ns %lu duty_percent %d\n",
+		__func__, c->config_mask, c->period_ticks, c->duty_ticks,
+		c->polarity, c->duty_ns, c->period_ns, c->duty_percent);
+
+	if (ret)
+		return ret;
+	return p->pwm->config(p, c);
+}
+EXPORT_SYMBOL(pwm_config);
+
+int pwm_set_period_ns(struct pwm_channel *p,
+		      unsigned long period_ns)
+{
+	struct pwm_channel_config c = {
+		.config_mask = PWM_CONFIG_PERIOD_TICKS,
+		.period_ticks = pwm_ns_to_ticks(p, period_ns),
+	};
+
+	return pwm_config(p, &c);
+}
+EXPORT_SYMBOL(pwm_set_period_ns);
+
+unsigned long pwm_get_period_ns(struct pwm_channel *p)
+{
+	return pwm_ticks_to_ns(p, p->period_ticks);
+}
+EXPORT_SYMBOL(pwm_get_period_ns);
+
+int pwm_set_duty_ns(struct pwm_channel *p,
+		    unsigned long duty_ns)
+{
+	struct pwm_channel_config c = {
+		.config_mask = PWM_CONFIG_DUTY_TICKS,
+		.duty_ticks = pwm_ns_to_ticks(p, duty_ns),
+	};
+	return pwm_config(p, &c);
+}
+EXPORT_SYMBOL(pwm_set_duty_ns);
+
+unsigned long pwm_get_duty_ns(struct pwm_channel *p)
+{
+	return pwm_ticks_to_ns(p, p->duty_ticks);
+}
+EXPORT_SYMBOL(pwm_get_duty_ns);
+
+int pwm_set_duty_percent(struct pwm_channel *p,
+			 int percent)
+{
+	struct pwm_channel_config c = {
+		.config_mask = PWM_CONFIG_DUTY_PERCENT,
+		.duty_percent = percent,
+	};
+	return pwm_config(p, &c);
+}
+EXPORT_SYMBOL(pwm_set_duty_percent);
+
+int pwm_set_polarity(struct pwm_channel *p,
+		     int active_high)
+{
+	struct pwm_channel_config c = {
+		.config_mask = PWM_CONFIG_POLARITY,
+		.polarity = active_high,
+	};
+	return pwm_config(p, &c);
+}
+EXPORT_SYMBOL(pwm_set_polarity);
+
+int pwm_start(struct pwm_channel *p)
+{
+	struct pwm_channel_config c = {
+		.config_mask = PWM_CONFIG_START,
+	};
+	return pwm_config(p, &c);
+}
+EXPORT_SYMBOL(pwm_start);
+
+int pwm_stop(struct pwm_channel *p)
+{
+	struct pwm_channel_config c = {
+		.config_mask = PWM_CONFIG_STOP,
+	};
+	return pwm_config(p, &c);
+}
+EXPORT_SYMBOL(pwm_stop);
+
+int pwm_synchronize(struct pwm_channel *p,
+		    struct pwm_channel *to_p)
+{
+	if (p->pwm != to_p->pwm) {
+		/* TODO: support cross-device synchronization */
+		return -EINVAL;
+	}
+
+	if (!p->pwm->synchronize)
+		return -EINVAL;
+
+	return p->pwm->synchronize(p, to_p);
+}
+EXPORT_SYMBOL(pwm_synchronize);
+
+int pwm_unsynchronize(struct pwm_channel *p,
+		      struct pwm_channel *from_p)
+{
+	if (from_p && (p->pwm != from_p->pwm)) {
+		/* TODO: support cross-device synchronization */
+		return -EINVAL;
+	}
+
+	if (!p->pwm->unsynchronize)
+		return -EINVAL;
+
+	return p->pwm->unsynchronize(p, from_p);
+}
+EXPORT_SYMBOL(pwm_unsynchronize);
+
+static void pwm_handler(struct work_struct *w)
+{
+	struct pwm_channel *p = container_of(w, struct pwm_channel,
+					     handler_work);
+	if (p->handler && p->handler(p, p->handler_data))
+		pwm_stop(p);
+}
+
+static void __pwm_callback(struct pwm_channel *p)
+{
+	queue_work(pwm_handler_workqueue, &p->handler_work);
+	dev_dbg(p->pwm->dev, "handler %p scheduled with data %p\n",
+		p->handler, p->handler_data);
+}
+
+int pwm_set_handler(struct pwm_channel *p,
+		    pwm_handler_t handler,
+		    void *data)
+{
+	if (p->pwm->set_callback) {
+		p->handler_data = data;
+		p->handler = handler;
+		INIT_WORK(&p->handler_work, pwm_handler);
+		return p->pwm->set_callback(p, handler ? __pwm_callback : NULL);
+	}
+	return -EINVAL;
+}
+EXPORT_SYMBOL(pwm_set_handler);
+
+static ssize_t pwm_run_store(struct device *dev,
+			     struct device_attribute *attr,
+			     const char *buf,
+			     size_t len)
+{
+	struct pwm_channel *p = dev_get_drvdata(dev);
+	if (sysfs_streq(buf, "1"))
+		pwm_start(p);
+	else if (sysfs_streq(buf, "0"))
+		pwm_stop(p);
+	return len;
+}
+static DEVICE_ATTR(run, 0200, NULL, pwm_run_store);
+
+static ssize_t pwm_duty_ns_show(struct device *dev,
+				struct device_attribute *attr,
+				char *buf)
+{
+	struct pwm_channel *p = dev_get_drvdata(dev);
+	return sprintf(buf, "%lu\n", pwm_get_duty_ns(p));
+}
+
+static ssize_t pwm_duty_ns_store(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf,
+				 size_t len)
+{
+	unsigned long duty_ns;
+	struct pwm_channel *p = dev_get_drvdata(dev);
+
+	if (1 == sscanf(buf, "%lu", &duty_ns))
+		pwm_set_duty_ns(p, duty_ns);
+	return len;
+}
+static DEVICE_ATTR(duty_ns, 0644, pwm_duty_ns_show, pwm_duty_ns_store);
+
+static ssize_t pwm_period_ns_show(struct device *dev,
+				  struct device_attribute *attr,
+				  char *buf)
+{
+	struct pwm_channel *p = dev_get_drvdata(dev);
+	return sprintf(buf, "%lu\n", pwm_get_period_ns(p));
+}
+
+static ssize_t pwm_period_ns_store(struct device *dev,
+				   struct device_attribute *attr,
+				   const char *buf,
+				   size_t len)
+{
+	unsigned long period_ns;
+	struct pwm_channel *p = dev_get_drvdata(dev);
+
+	if (1 == sscanf(buf, "%lu", &period_ns))
+		pwm_set_period_ns(p, period_ns);
+	return len;
+}
+static DEVICE_ATTR(period_ns, 0644, pwm_period_ns_show, pwm_period_ns_store);
+
+static ssize_t pwm_polarity_show(struct device *dev,
+				 struct device_attribute *attr,
+				 char *buf)
+{
+	struct pwm_channel *p = dev_get_drvdata(dev);
+	return sprintf(buf, "%d\n", p->active_high ? 1 : 0);
+}
+
+static ssize_t pwm_polarity_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf,
+				  size_t len)
+{
+	int polarity;
+	struct pwm_channel *p = dev_get_drvdata(dev);
+
+	if (1 == sscanf(buf, "%d", &polarity))
+		pwm_set_polarity(p, polarity);
+	return len;
+}
+static DEVICE_ATTR(polarity, 0644, pwm_polarity_show, pwm_polarity_store);
+
+static ssize_t pwm_request_show(struct device *dev,
+				struct device_attribute *attr,
+				char *buf)
+{
+	struct pwm_channel *p = dev_get_drvdata(dev);
+	mutex_lock(&device_list_mutex);
+	__pwm_request_channel(p, REQUEST_SYSFS);
+	mutex_unlock(&device_list_mutex);
+
+	if (p->pid)
+		return sprintf(buf, "%s %d\n", p->requester, p->pid);
+	else
+		return sprintf(buf, "%s\n", p->requester);
+}
+
+static ssize_t pwm_request_store(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf,
+				 size_t len)
+{
+	struct pwm_channel *p = dev_get_drvdata(dev);
+	pwm_free(p);
+	return len;
+}
+static DEVICE_ATTR(request, 0644, pwm_request_show, pwm_request_store);
+
+static const struct attribute *pwm_attrs[] =
+{
+	&dev_attr_run.attr,
+	&dev_attr_polarity.attr,
+	&dev_attr_duty_ns.attr,
+	&dev_attr_period_ns.attr,
+	&dev_attr_request.attr,
+	NULL,
+};
+
+static const struct attribute_group pwm_device_attr_group = {
+	.attrs = (struct attribute **)pwm_attrs,
+};
+
+static int __pwm_create_sysfs(struct pwm_device *pwm)
+{
+	int ret = 0;
+	struct device *dev;
+	int wchan;
+
+	for (wchan = 0; wchan < pwm->nchan; wchan++) {
+		dev = device_create(&pwm_class, pwm->dev, MKDEV(0, 0),
+				    pwm->channels + wchan,
+				    "%s:%d", pwm->bus_id, wchan);
+		if (!dev)
+			goto err_dev_create;
+		ret = sysfs_create_group(&dev->kobj, &pwm_device_attr_group);
+		if (ret)
+			goto err_dev_create;
+	}
+
+	return ret;
+
+err_dev_create:
+	for (wchan = 0; wchan < pwm->nchan; wchan++) {
+		dev = class_find_device(&pwm_class, NULL,
+					&pwm->channels[wchan],
+					__match_device);
+		if (dev) {
+			put_device(dev);
+			device_unregister(dev);
+		}
+	}
+
+	return ret;
+}
+
+static struct class_attribute pwm_class_attrs[] = {
+	__ATTR_NULL,
+};
+
+static struct class pwm_class = {
+	.name = "pwm",
+	.owner = THIS_MODULE,
+
+	.class_attrs = pwm_class_attrs,
+};
+
+static int __init pwm_init(void)
+{
+	int ret;
+
+	/* TODO: how to deal with devices that register very early? */
+	pr_err("%s\n", __func__);
+	ret = class_register(&pwm_class);
+	if (ret < 0)
+		return ret;
+
+	pwm_handler_workqueue = create_workqueue("pwmd");
+
+	return 0;
+}
+postcore_initcall(pwm_init);
diff --git a/target/linux/generic/files/fs/yaffs2/Kconfig b/target/linux/generic/files/fs/yaffs2/Kconfig
new file mode 100644
index 0000000000..7b6f836cda
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/Kconfig
@@ -0,0 +1,175 @@
+#
+# YAFFS file system configurations
+#
+
+config YAFFS_FS
+	tristate "YAFFS2 file system support"
+	default n
+	depends on MTD
+	select YAFFS_YAFFS1
+	select YAFFS_YAFFS2
+	help
+	  YAFFS2, or Yet Another Flash Filing System, is a filing system
+	  optimised for NAND Flash chips.
+
+	  To compile the YAFFS2 file system support as a module, choose M
+	  here: the module will be called yaffs2.
+
+	  If unsure, say N.
+
+	  Further information on YAFFS2 is available at
+	  <http://www.aleph1.co.uk/yaffs/>.
+
+config YAFFS_YAFFS1
+	bool "512 byte / page devices"
+	depends on YAFFS_FS
+	default y
+	help
+	  Enable YAFFS1 support -- yaffs for 512 byte / page devices
+
+	  Not needed for 2K-page devices.
+
+	  If unsure, say Y.
+
+config YAFFS_9BYTE_TAGS
+	bool "Use older-style on-NAND data format with pageStatus byte"
+	depends on YAFFS_YAFFS1
+	default n
+	help
+
+	  Older-style on-NAND data format has a "pageStatus" byte to record
+	  chunk/page state.  This byte is zero when the page is discarded.
+	  Choose this option if you have existing on-NAND data using this
+	  format that you need to continue to support.  New data written
+	  also uses the older-style format.  Note: Use of this option
+	  generally requires that MTD's oob layout be adjusted to use the
+	  older-style format.  See notes on tags formats and MTD versions.
+
+	  If unsure, say N.
+
+config YAFFS_DOES_ECC
+	bool "Lets Yaffs do its own ECC"
+	depends on YAFFS_FS && YAFFS_YAFFS1 && !YAFFS_9BYTE_TAGS
+	default n
+	help
+	  This enables Yaffs to use its own ECC functions instead of using
+	  the ones from the generic MTD-NAND driver.
+
+	  If unsure, say N.
+
+config YAFFS_ECC_WRONG_ORDER
+	bool "Use the same ecc byte order as Steven Hill's nand_ecc.c"
+	depends on YAFFS_FS && YAFFS_DOES_ECC && !YAFFS_9BYTE_TAGS
+	default n
+	help
+	  This makes yaffs_ecc.c use the same ecc byte order as Steven
+	  Hill's nand_ecc.c. If not set, then you get the same ecc byte
+	  order as SmartMedia.
+
+	  If unsure, say N.
+
+config YAFFS_YAFFS2
+	bool "2048 byte (or larger) / page devices"
+	depends on YAFFS_FS
+	default y
+	help
+	  Enable YAFFS2 support -- yaffs for >= 2K bytes per page devices
+
+	  If unsure, say Y.
+
+config YAFFS_AUTO_YAFFS2
+	bool "Autoselect yaffs2 format"
+	depends on YAFFS_YAFFS2
+	default y
+	help
+	  Without this, you need to explicitely use yaffs2 as the file
+	  system type. With this, you can say "yaffs" and yaffs or yaffs2
+	  will be used depending on the device page size (yaffs on
+	  512-byte page devices, yaffs2 on 2K page devices).
+
+	  If unsure, say Y.
+
+config YAFFS_DISABLE_LAZY_LOAD
+	bool "Disable lazy loading"
+	depends on YAFFS_YAFFS2
+	default n
+	help
+	  "Lazy loading" defers loading file details until they are
+	  required. This saves mount time, but makes the first look-up
+	  a bit longer.
+
+	  Lazy loading will only happen if enabled by this option being 'n'
+	  and if the appropriate tags are available, else yaffs2 will
+	  automatically fall back to immediate loading and do the right
+	  thing.
+
+	  Lazy laoding will be required by checkpointing.
+
+	  Setting this to 'y' will disable lazy loading.
+
+	  If unsure, say N.
+
+config YAFFS_CHECKPOINT_RESERVED_BLOCKS
+	int "Reserved blocks for checkpointing"
+	depends on YAFFS_YAFFS2
+	default 10
+	help
+          Give the number of Blocks to reserve for checkpointing.
+	  Checkpointing saves the state at unmount so that mounting is
+	  much faster as a scan of all the flash to regenerate this state
+	  is not needed.  These Blocks are reserved per partition, so if
+	  you have very small partitions the default (10) may be a mess
+	  for you.  You can set this value to 0, but that does not mean
+	  checkpointing is disabled at all. There only won't be any
+	  specially reserved blocks for checkpointing, so if there is
+	  enough free space on the filesystem, it will be used for
+	  checkpointing.
+
+	  If unsure, leave at default (10), but don't wonder if there are
+	  always 2MB used on your large page device partition (10 x 2k
+	  pagesize). When using small partitions or when being very small
+	  on space, you probably want to set this to zero.
+
+config YAFFS_DISABLE_WIDE_TNODES
+	bool "Turn off wide tnodes"
+	depends on YAFFS_FS
+	default n
+	help
+	  Wide tnodes are only used for NAND arrays >=32MB for 512-byte
+	  page devices and >=128MB for 2k page devices. They use slightly
+	  more RAM but are faster since they eliminate chunk group
+	  searching.
+
+	  Setting this to 'y' will force tnode width to 16 bits and save
+	  memory but make large arrays slower.
+
+	  If unsure, say N.
+
+config YAFFS_ALWAYS_CHECK_CHUNK_ERASED
+	bool "Force chunk erase check"
+	depends on YAFFS_FS
+	default n
+	help
+          Normally YAFFS only checks chunks before writing until an erased
+	  chunk is found. This helps to detect any partially written
+	  chunks that might have happened due to power loss.
+
+	  Enabling this forces on the test that chunks are erased in flash
+	  before writing to them. This takes more time but is potentially
+	  a bit more secure.
+
+	  Suggest setting Y during development and ironing out driver
+	  issues etc. Suggest setting to N if you want faster writing.
+
+	  If unsure, say Y.
+
+config YAFFS_SHORT_NAMES_IN_RAM
+	bool "Cache short names in RAM"
+	depends on YAFFS_FS
+	default y
+	help
+	  If this config is set, then short names are stored with the
+	  yaffs_Object.  This costs an extra 16 bytes of RAM per object,
+	  but makes look-ups faster.
+
+	  If unsure, say Y.
diff --git a/target/linux/generic/files/fs/yaffs2/Makefile b/target/linux/generic/files/fs/yaffs2/Makefile
new file mode 100644
index 0000000000..73f46583f4
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the linux YAFFS filesystem routines.
+#
+
+obj-$(CONFIG_YAFFS_FS) += yaffs.o
+
+yaffs-y := yaffs_ecc.o yaffs_fs.o yaffs_guts.o yaffs_checkptrw.o
+yaffs-y += yaffs_packedtags2.o yaffs_nand.o yaffs_qsort.o
+yaffs-y += yaffs_tagscompat.o yaffs_tagsvalidity.o
+yaffs-y += yaffs_mtdif1.o yaffs_packedtags1.o
+yaffs-y += yaffs_mtdif.o yaffs_mtdif2.o
diff --git a/target/linux/generic/files/fs/yaffs2/devextras.h b/target/linux/generic/files/fs/yaffs2/devextras.h
new file mode 100644
index 0000000000..fcf2690a56
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/devextras.h
@@ -0,0 +1,264 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ *   for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+/*
+ * This file is just holds extra declarations used during development.
+ * Most of these are from kernel includes placed here so we can use them in
+ * applications.
+ *
+ */
+
+#ifndef __EXTRAS_H__
+#define __EXTRAS_H__
+
+#if defined WIN32
+#define __inline__ __inline
+#define new newHack
+#endif
+
+#if !(defined __KERNEL__) || (defined WIN32)
+
+/* User space defines */
+
+typedef unsigned char __u8;
+typedef unsigned short __u16;
+typedef unsigned __u32;
+
+/*
+ * Simple doubly linked list implementation.
+ *
+ * Some of the internal functions ("__xxx") are useful when
+ * manipulating whole lists rather than single entries, as
+ * sometimes we already know the next/prev entries and we can
+ * generate better code by using them directly rather than
+ * using the generic single-entry routines.
+ */
+
+#define prefetch(x) 1
+
+struct list_head {
+	struct list_head *next, *prev;
+};
+
+#define LIST_HEAD_INIT(name) { &(name), &(name) }
+
+#define LIST_HEAD(name) \
+	struct list_head name = LIST_HEAD_INIT(name)
+
+#define INIT_LIST_HEAD(ptr) do { \
+	(ptr)->next = (ptr); (ptr)->prev = (ptr); \
+} while (0)
+
+/*
+ * Insert a new entry between two known consecutive entries.
+ *
+ * This is only for internal list manipulation where we know
+ * the prev/next entries already!
+ */
+static __inline__ void __list_add(struct list_head *new,
+				  struct list_head *prev,
+				  struct list_head *next)
+{
+	next->prev = new;
+	new->next = next;
+	new->prev = prev;
+	prev->next = new;
+}
+
+/**
+ * list_add - add a new entry
+ * @new: new entry to be added
+ * @head: list head to add it after
+ *
+ * Insert a new entry after the specified head.
+ * This is good for implementing stacks.
+ */
+static __inline__ void list_add(struct list_head *new, struct list_head *head)
+{
+	__list_add(new, head, head->next);
+}
+
+/**
+ * list_add_tail - add a new entry
+ * @new: new entry to be added
+ * @head: list head to add it before
+ *
+ * Insert a new entry before the specified head.
+ * This is useful for implementing queues.
+ */
+static __inline__ void list_add_tail(struct list_head *new,
+				     struct list_head *head)
+{
+	__list_add(new, head->prev, head);
+}
+
+/*
+ * Delete a list entry by making the prev/next entries
+ * point to each other.
+ *
+ * This is only for internal list manipulation where we know
+ * the prev/next entries already!
+ */
+static __inline__ void __list_del(struct list_head *prev,
+				  struct list_head *next)
+{
+	next->prev = prev;
+	prev->next = next;
+}
+
+/**
+ * list_del - deletes entry from list.
+ * @entry: the element to delete from the list.
+ * Note: list_empty on entry does not return true after this, the entry is
+ * in an undefined state.
+ */
+static __inline__ void list_del(struct list_head *entry)
+{
+	__list_del(entry->prev, entry->next);
+}
+
+/**
+ * list_del_init - deletes entry from list and reinitialize it.
+ * @entry: the element to delete from the list.
+ */
+static __inline__ void list_del_init(struct list_head *entry)
+{
+	__list_del(entry->prev, entry->next);
+	INIT_LIST_HEAD(entry);
+}
+
+/**
+ * list_empty - tests whether a list is empty
+ * @head: the list to test.
+ */
+static __inline__ int list_empty(struct list_head *head)
+{
+	return head->next == head;
+}
+
+/**
+ * list_splice - join two lists
+ * @list: the new list to add.
+ * @head: the place to add it in the first list.
+ */
+static __inline__ void list_splice(struct list_head *list,
+				   struct list_head *head)
+{
+	struct list_head *first = list->next;
+
+	if (first != list) {
+		struct list_head *last = list->prev;
+		struct list_head *at = head->next;
+
+		first->prev = head;
+		head->next = first;
+
+		last->next = at;
+		at->prev = last;
+	}
+}
+
+/**
+ * list_entry - get the struct for this entry
+ * @ptr:	the &struct list_head pointer.
+ * @type:	the type of the struct this is embedded in.
+ * @member:	the name of the list_struct within the struct.
+ */
+#define list_entry(ptr, type, member) \
+	((type *)((char *)(ptr)-(unsigned long)(&((type *)0)->member)))
+
+/**
+ * list_for_each	-	iterate over a list
+ * @pos:	the &struct list_head to use as a loop counter.
+ * @head:	the head for your list.
+ */
+#define list_for_each(pos, head) \
+	for (pos = (head)->next, prefetch(pos->next); pos != (head); \
+        	pos = pos->next, prefetch(pos->next))
+
+/**
+ * list_for_each_safe	-	iterate over a list safe against removal
+ *                              of list entry
+ * @pos:	the &struct list_head to use as a loop counter.
+ * @n:		another &struct list_head to use as temporary storage
+ * @head:	the head for your list.
+ */
+#define list_for_each_safe(pos, n, head) \
+	for (pos = (head)->next, n = pos->next; pos != (head); \
+		pos = n, n = pos->next)
+
+/*
+ * File types
+ */
+#define DT_UNKNOWN	0
+#define DT_FIFO		1
+#define DT_CHR		2
+#define DT_DIR		4
+#define DT_BLK		6
+#define DT_REG		8
+#define DT_LNK		10
+#define DT_SOCK		12
+#define DT_WHT		14
+
+#ifndef WIN32
+#include <sys/stat.h>
+#endif
+
+/*
+ * Attribute flags.  These should be or-ed together to figure out what
+ * has been changed!
+ */
+#define ATTR_MODE	1
+#define ATTR_UID	2
+#define ATTR_GID	4
+#define ATTR_SIZE	8
+#define ATTR_ATIME	16
+#define ATTR_MTIME	32
+#define ATTR_CTIME	64
+#define ATTR_ATIME_SET	128
+#define ATTR_MTIME_SET	256
+#define ATTR_FORCE	512	/* Not a change, but a change it */
+#define ATTR_ATTR_FLAG	1024
+
+struct iattr {
+	unsigned int ia_valid;
+	unsigned ia_mode;
+	unsigned ia_uid;
+	unsigned ia_gid;
+	unsigned ia_size;
+	unsigned ia_atime;
+	unsigned ia_mtime;
+	unsigned ia_ctime;
+	unsigned int ia_attr_flags;
+};
+
+#define KERN_DEBUG
+
+#else
+
+#ifndef WIN32
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/fs.h>
+#include <linux/stat.h>
+#endif
+
+#endif
+
+#if defined WIN32
+#undef new
+#endif
+
+#endif
diff --git a/target/linux/generic/files/fs/yaffs2/moduleconfig.h b/target/linux/generic/files/fs/yaffs2/moduleconfig.h
new file mode 100644
index 0000000000..016391ca59
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/moduleconfig.h
@@ -0,0 +1,65 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ *   for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Martin Fouts <Martin.Fouts@palmsource.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+#ifndef __YAFFS_CONFIG_H__
+#define __YAFFS_CONFIG_H__
+
+#ifdef YAFFS_OUT_OF_TREE
+
+/* DO NOT UNSET THESE THREE. YAFFS2 will not compile if you do. */
+#define CONFIG_YAFFS_FS
+#define CONFIG_YAFFS_YAFFS1
+#define CONFIG_YAFFS_YAFFS2
+
+/* These options are independent of each other.  Select those that matter. */
+
+/* Default: Not selected */
+/* Meaning: Yaffs does its own ECC, rather than using MTD ECC */
+//#define CONFIG_YAFFS_DOES_ECC
+
+/* Default: Not selected */
+/* Meaning: ECC byte order is 'wrong'.  Only meaningful if */
+/*          CONFIG_YAFFS_DOES_ECC is set */
+//#define CONFIG_YAFFS_ECC_WRONG_ORDER
+
+/* Default: Selected */
+/* Meaning: Disables testing whether chunks are erased before writing to them*/
+#define CONFIG_YAFFS_DISABLE_CHUNK_ERASED_CHECK
+
+/* Default: Selected */
+/* Meaning: Cache short names, taking more RAM, but faster look-ups */
+#define CONFIG_YAFFS_SHORT_NAMES_IN_RAM
+
+/* Default: 10 */
+/* Meaning: set the count of blocks to reserve for checkpointing */
+#define CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS 10
+
+/*
+Older-style on-NAND data format has a "pageStatus" byte to record
+chunk/page state.  This byte is zeroed when the page is discarded.
+Choose this option if you have existing on-NAND data in this format
+that you need to continue to support.  New data written also uses the
+older-style format.
+Note: Use of this option generally requires that MTD's oob layout be
+adjusted to use the older-style format.  See notes on tags formats and
+MTD versions.
+*/
+/* Default: Not selected */
+/* Meaning: Use older-style on-NAND data format with pageStatus byte */
+#define CONFIG_YAFFS_9BYTE_TAGS
+
+#endif /* YAFFS_OUT_OF_TREE */
+
+#endif /* __YAFFS_CONFIG_H__ */
diff --git a/target/linux/generic/files/fs/yaffs2/yaffs_checkptrw.c b/target/linux/generic/files/fs/yaffs2/yaffs_checkptrw.c
new file mode 100644
index 0000000000..933a33fb8b
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/yaffs_checkptrw.c
@@ -0,0 +1,404 @@
+/*
+ * YAFFS: Yet Another Flash File System. A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ *   for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+const char *yaffs_checkptrw_c_version =
+    "$Id: yaffs_checkptrw.c,v 1.14 2007-05-15 20:07:40 charles Exp $";
+
+
+#include "yaffs_checkptrw.h"
+
+
+static int yaffs_CheckpointSpaceOk(yaffs_Device *dev)
+{
+
+	int blocksAvailable = dev->nErasedBlocks - dev->nReservedBlocks;
+
+	T(YAFFS_TRACE_CHECKPOINT,
+		(TSTR("checkpt blocks available = %d" TENDSTR),
+		blocksAvailable));
+
+
+	return (blocksAvailable <= 0) ? 0 : 1;
+}
+
+
+static int yaffs_CheckpointErase(yaffs_Device *dev)
+{
+
+	int i;
+
+
+	if(!dev->eraseBlockInNAND)
+		return 0;
+	T(YAFFS_TRACE_CHECKPOINT,(TSTR("checking blocks %d to %d"TENDSTR),
+		dev->internalStartBlock,dev->internalEndBlock));
+
+	for(i = dev->internalStartBlock; i <= dev->internalEndBlock; i++) {
+		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,i);
+		if(bi->blockState == YAFFS_BLOCK_STATE_CHECKPOINT){
+			T(YAFFS_TRACE_CHECKPOINT,(TSTR("erasing checkpt block %d"TENDSTR),i));
+			if(dev->eraseBlockInNAND(dev,i- dev->blockOffset /* realign */)){
+				bi->blockState = YAFFS_BLOCK_STATE_EMPTY;
+				dev->nErasedBlocks++;
+				dev->nFreeChunks += dev->nChunksPerBlock;
+			}
+			else {
+				dev->markNANDBlockBad(dev,i);
+				bi->blockState = YAFFS_BLOCK_STATE_DEAD;
+			}
+		}
+	}
+
+	dev->blocksInCheckpoint = 0;
+
+	return 1;
+}
+
+
+static void yaffs_CheckpointFindNextErasedBlock(yaffs_Device *dev)
+{
+	int  i;
+	int blocksAvailable = dev->nErasedBlocks - dev->nReservedBlocks;
+	T(YAFFS_TRACE_CHECKPOINT,
+		(TSTR("allocating checkpt block: erased %d reserved %d avail %d next %d "TENDSTR),
+		dev->nErasedBlocks,dev->nReservedBlocks,blocksAvailable,dev->checkpointNextBlock));
+
+	if(dev->checkpointNextBlock >= 0 &&
+	   dev->checkpointNextBlock <= dev->internalEndBlock &&
+	   blocksAvailable > 0){
+
+		for(i = dev->checkpointNextBlock; i <= dev->internalEndBlock; i++){
+			yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,i);
+			if(bi->blockState == YAFFS_BLOCK_STATE_EMPTY){
+				dev->checkpointNextBlock = i + 1;
+				dev->checkpointCurrentBlock = i;
+				T(YAFFS_TRACE_CHECKPOINT,(TSTR("allocating checkpt block %d"TENDSTR),i));
+				return;
+			}
+		}
+	}
+	T(YAFFS_TRACE_CHECKPOINT,(TSTR("out of checkpt blocks"TENDSTR)));
+
+	dev->checkpointNextBlock = -1;
+	dev->checkpointCurrentBlock = -1;
+}
+
+static void yaffs_CheckpointFindNextCheckpointBlock(yaffs_Device *dev)
+{
+	int  i;
+	yaffs_ExtendedTags tags;
+
+	T(YAFFS_TRACE_CHECKPOINT,(TSTR("find next checkpt block: start:  blocks %d next %d" TENDSTR),
+		dev->blocksInCheckpoint, dev->checkpointNextBlock));
+
+	if(dev->blocksInCheckpoint < dev->checkpointMaxBlocks)
+		for(i = dev->checkpointNextBlock; i <= dev->internalEndBlock; i++){
+			int chunk = i * dev->nChunksPerBlock;
+			int realignedChunk = chunk - dev->chunkOffset;
+
+			dev->readChunkWithTagsFromNAND(dev,realignedChunk,NULL,&tags);
+			T(YAFFS_TRACE_CHECKPOINT,(TSTR("find next checkpt block: search: block %d oid %d seq %d eccr %d" TENDSTR),
+				i, tags.objectId,tags.sequenceNumber,tags.eccResult));
+
+			if(tags.sequenceNumber == YAFFS_SEQUENCE_CHECKPOINT_DATA){
+				/* Right kind of block */
+				dev->checkpointNextBlock = tags.objectId;
+				dev->checkpointCurrentBlock = i;
+				dev->checkpointBlockList[dev->blocksInCheckpoint] = i;
+				dev->blocksInCheckpoint++;
+				T(YAFFS_TRACE_CHECKPOINT,(TSTR("found checkpt block %d"TENDSTR),i));
+				return;
+			}
+		}
+
+	T(YAFFS_TRACE_CHECKPOINT,(TSTR("found no more checkpt blocks"TENDSTR)));
+
+	dev->checkpointNextBlock = -1;
+	dev->checkpointCurrentBlock = -1;
+}
+
+
+int yaffs_CheckpointOpen(yaffs_Device *dev, int forWriting)
+{
+
+	/* Got the functions we need? */
+	if (!dev->writeChunkWithTagsToNAND ||
+	    !dev->readChunkWithTagsFromNAND ||
+	    !dev->eraseBlockInNAND ||
+	    !dev->markNANDBlockBad)
+		return 0;
+
+	if(forWriting && !yaffs_CheckpointSpaceOk(dev))
+		return 0;
+
+	if(!dev->checkpointBuffer)
+		dev->checkpointBuffer = YMALLOC_DMA(dev->nDataBytesPerChunk);
+	if(!dev->checkpointBuffer)
+		return 0;
+
+
+	dev->checkpointPageSequence = 0;
+
+	dev->checkpointOpenForWrite = forWriting;
+
+	dev->checkpointByteCount = 0;
+	dev->checkpointSum = 0;
+	dev->checkpointXor = 0;
+	dev->checkpointCurrentBlock = -1;
+	dev->checkpointCurrentChunk = -1;
+	dev->checkpointNextBlock = dev->internalStartBlock;
+
+	/* Erase all the blocks in the checkpoint area */
+	if(forWriting){
+		memset(dev->checkpointBuffer,0,dev->nDataBytesPerChunk);
+		dev->checkpointByteOffset = 0;
+		return yaffs_CheckpointErase(dev);
+
+
+	} else {
+		int i;
+		/* Set to a value that will kick off a read */
+		dev->checkpointByteOffset = dev->nDataBytesPerChunk;
+		/* A checkpoint block list of 1 checkpoint block per 16 block is (hopefully)
+		 * going to be way more than we need */
+		dev->blocksInCheckpoint = 0;
+		dev->checkpointMaxBlocks = (dev->internalEndBlock - dev->internalStartBlock)/16 + 2;
+		dev->checkpointBlockList = YMALLOC(sizeof(int) * dev->checkpointMaxBlocks);
+		for(i = 0; i < dev->checkpointMaxBlocks; i++)
+			dev->checkpointBlockList[i] = -1;
+	}
+
+	return 1;
+}
+
+int yaffs_GetCheckpointSum(yaffs_Device *dev, __u32 *sum)
+{
+	__u32 compositeSum;
+	compositeSum =  (dev->checkpointSum << 8) | (dev->checkpointXor & 0xFF);
+	*sum = compositeSum;
+	return 1;
+}
+
+static int yaffs_CheckpointFlushBuffer(yaffs_Device *dev)
+{
+
+	int chunk;
+	int realignedChunk;
+
+	yaffs_ExtendedTags tags;
+
+	if(dev->checkpointCurrentBlock < 0){
+		yaffs_CheckpointFindNextErasedBlock(dev);
+		dev->checkpointCurrentChunk = 0;
+	}
+
+	if(dev->checkpointCurrentBlock < 0)
+		return 0;
+
+	tags.chunkDeleted = 0;
+	tags.objectId = dev->checkpointNextBlock; /* Hint to next place to look */
+	tags.chunkId = dev->checkpointPageSequence + 1;
+	tags.sequenceNumber =  YAFFS_SEQUENCE_CHECKPOINT_DATA;
+	tags.byteCount = dev->nDataBytesPerChunk;
+	if(dev->checkpointCurrentChunk == 0){
+		/* First chunk we write for the block? Set block state to
+		   checkpoint */
+		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,dev->checkpointCurrentBlock);
+		bi->blockState = YAFFS_BLOCK_STATE_CHECKPOINT;
+		dev->blocksInCheckpoint++;
+	}
+
+	chunk = dev->checkpointCurrentBlock * dev->nChunksPerBlock + dev->checkpointCurrentChunk;
+
+
+	T(YAFFS_TRACE_CHECKPOINT,(TSTR("checkpoint wite buffer nand %d(%d:%d) objid %d chId %d" TENDSTR),
+		chunk, dev->checkpointCurrentBlock, dev->checkpointCurrentChunk,tags.objectId,tags.chunkId));
+
+	realignedChunk = chunk - dev->chunkOffset;
+
+	dev->writeChunkWithTagsToNAND(dev,realignedChunk,dev->checkpointBuffer,&tags);
+	dev->checkpointByteOffset = 0;
+	dev->checkpointPageSequence++;
+	dev->checkpointCurrentChunk++;
+	if(dev->checkpointCurrentChunk >= dev->nChunksPerBlock){
+		dev->checkpointCurrentChunk = 0;
+		dev->checkpointCurrentBlock = -1;
+	}
+	memset(dev->checkpointBuffer,0,dev->nDataBytesPerChunk);
+
+	return 1;
+}
+
+
+int yaffs_CheckpointWrite(yaffs_Device *dev,const void *data, int nBytes)
+{
+	int i=0;
+	int ok = 1;
+
+
+	__u8 * dataBytes = (__u8 *)data;
+
+
+
+	if(!dev->checkpointBuffer)
+		return 0;
+
+	if(!dev->checkpointOpenForWrite)
+		return -1;
+
+	while(i < nBytes && ok) {
+
+
+
+		dev->checkpointBuffer[dev->checkpointByteOffset] = *dataBytes ;
+		dev->checkpointSum += *dataBytes;
+		dev->checkpointXor ^= *dataBytes;
+
+		dev->checkpointByteOffset++;
+		i++;
+		dataBytes++;
+		dev->checkpointByteCount++;
+
+
+		if(dev->checkpointByteOffset < 0 ||
+		   dev->checkpointByteOffset >= dev->nDataBytesPerChunk)
+			ok = yaffs_CheckpointFlushBuffer(dev);
+
+	}
+
+	return 	i;
+}
+
+int yaffs_CheckpointRead(yaffs_Device *dev, void *data, int nBytes)
+{
+	int i=0;
+	int ok = 1;
+	yaffs_ExtendedTags tags;
+
+
+	int chunk;
+	int realignedChunk;
+
+	__u8 *dataBytes = (__u8 *)data;
+
+	if(!dev->checkpointBuffer)
+		return 0;
+
+	if(dev->checkpointOpenForWrite)
+		return -1;
+
+	while(i < nBytes && ok) {
+
+
+		if(dev->checkpointByteOffset < 0 ||
+		   dev->checkpointByteOffset >= dev->nDataBytesPerChunk) {
+
+		   	if(dev->checkpointCurrentBlock < 0){
+				yaffs_CheckpointFindNextCheckpointBlock(dev);
+				dev->checkpointCurrentChunk = 0;
+			}
+
+			if(dev->checkpointCurrentBlock < 0)
+				ok = 0;
+			else {
+
+				chunk = dev->checkpointCurrentBlock * dev->nChunksPerBlock +
+				          dev->checkpointCurrentChunk;
+
+				realignedChunk = chunk - dev->chunkOffset;
+
+	   			/* read in the next chunk */
+	   			/* printf("read checkpoint page %d\n",dev->checkpointPage); */
+				dev->readChunkWithTagsFromNAND(dev, realignedChunk,
+							       dev->checkpointBuffer,
+							      &tags);
+
+				if(tags.chunkId != (dev->checkpointPageSequence + 1) ||
+				   tags.sequenceNumber != YAFFS_SEQUENCE_CHECKPOINT_DATA)
+				   ok = 0;
+
+				dev->checkpointByteOffset = 0;
+				dev->checkpointPageSequence++;
+				dev->checkpointCurrentChunk++;
+
+				if(dev->checkpointCurrentChunk >= dev->nChunksPerBlock)
+					dev->checkpointCurrentBlock = -1;
+			}
+		}
+
+		if(ok){
+			*dataBytes = dev->checkpointBuffer[dev->checkpointByteOffset];
+			dev->checkpointSum += *dataBytes;
+			dev->checkpointXor ^= *dataBytes;
+			dev->checkpointByteOffset++;
+			i++;
+			dataBytes++;
+			dev->checkpointByteCount++;
+		}
+	}
+
+	return 	i;
+}
+
+int yaffs_CheckpointClose(yaffs_Device *dev)
+{
+
+	if(dev->checkpointOpenForWrite){
+		if(dev->checkpointByteOffset != 0)
+			yaffs_CheckpointFlushBuffer(dev);
+	} else {
+		int i;
+		for(i = 0; i < dev->blocksInCheckpoint && dev->checkpointBlockList[i] >= 0; i++){
+			yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,dev->checkpointBlockList[i]);
+			if(bi->blockState == YAFFS_BLOCK_STATE_EMPTY)
+				bi->blockState = YAFFS_BLOCK_STATE_CHECKPOINT;
+			else {
+				// Todo this looks odd...
+			}
+		}
+		YFREE(dev->checkpointBlockList);
+		dev->checkpointBlockList = NULL;
+	}
+
+	dev->nFreeChunks -= dev->blocksInCheckpoint * dev->nChunksPerBlock;
+	dev->nErasedBlocks -= dev->blocksInCheckpoint;
+
+
+	T(YAFFS_TRACE_CHECKPOINT,(TSTR("checkpoint byte count %d" TENDSTR),
+			dev->checkpointByteCount));
+
+	if(dev->checkpointBuffer){
+		/* free the buffer */
+		YFREE(dev->checkpointBuffer);
+		dev->checkpointBuffer = NULL;
+		return 1;
+	}
+	else
+		return 0;
+
+}
+
+int yaffs_CheckpointInvalidateStream(yaffs_Device *dev)
+{
+	/* Erase the first checksum block */
+
+	T(YAFFS_TRACE_CHECKPOINT,(TSTR("checkpoint invalidate"TENDSTR)));
+
+	if(!yaffs_CheckpointSpaceOk(dev))
+		return 0;
+
+	return yaffs_CheckpointErase(dev);
+}
+
+
+
diff --git a/target/linux/generic/files/fs/yaffs2/yaffs_checkptrw.h b/target/linux/generic/files/fs/yaffs2/yaffs_checkptrw.h
new file mode 100644
index 0000000000..d3ff17405f
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/yaffs_checkptrw.h
@@ -0,0 +1,35 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ *   for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+#ifndef __YAFFS_CHECKPTRW_H__
+#define __YAFFS_CHECKPTRW_H__
+
+#include "yaffs_guts.h"
+
+int yaffs_CheckpointOpen(yaffs_Device *dev, int forWriting);
+
+int yaffs_CheckpointWrite(yaffs_Device *dev,const void *data, int nBytes);
+
+int yaffs_CheckpointRead(yaffs_Device *dev,void *data, int nBytes);
+
+int yaffs_GetCheckpointSum(yaffs_Device *dev, __u32 *sum);
+
+int yaffs_CheckpointClose(yaffs_Device *dev);
+
+int yaffs_CheckpointInvalidateStream(yaffs_Device *dev);
+
+
+#endif
+
diff --git a/target/linux/generic/files/fs/yaffs2/yaffs_ecc.c b/target/linux/generic/files/fs/yaffs2/yaffs_ecc.c
new file mode 100644
index 0000000000..e2860393d3
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/yaffs_ecc.c
@@ -0,0 +1,331 @@
+/*
+ * YAFFS: Yet Another Flash File System. A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ *   for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * This code implements the ECC algorithm used in SmartMedia.
+ *
+ * The ECC comprises 22 bits of parity information and is stuffed into 3 bytes.
+ * The two unused bit are set to 1.
+ * The ECC can correct single bit errors in a 256-byte page of data. Thus, two such ECC
+ * blocks are used on a 512-byte NAND page.
+ *
+ */
+
+/* Table generated by gen-ecc.c
+ * Using a table means we do not have to calculate p1..p4 and p1'..p4'
+ * for each byte of data. These are instead provided in a table in bits7..2.
+ * Bit 0 of each entry indicates whether the entry has an odd or even parity, and therefore
+ * this bytes influence on the line parity.
+ */
+
+const char *yaffs_ecc_c_version =
+    "$Id: yaffs_ecc.c,v 1.9 2007-02-14 01:09:06 wookey Exp $";
+
+#include "yportenv.h"
+
+#include "yaffs_ecc.h"
+
+static const unsigned char column_parity_table[] = {
+	0x00, 0x55, 0x59, 0x0c, 0x65, 0x30, 0x3c, 0x69,
+	0x69, 0x3c, 0x30, 0x65, 0x0c, 0x59, 0x55, 0x00,
+	0x95, 0xc0, 0xcc, 0x99, 0xf0, 0xa5, 0xa9, 0xfc,
+	0xfc, 0xa9, 0xa5, 0xf0, 0x99, 0xcc, 0xc0, 0x95,
+	0x99, 0xcc, 0xc0, 0x95, 0xfc, 0xa9, 0xa5, 0xf0,
+	0xf0, 0xa5, 0xa9, 0xfc, 0x95, 0xc0, 0xcc, 0x99,
+	0x0c, 0x59, 0x55, 0x00, 0x69, 0x3c, 0x30, 0x65,
+	0x65, 0x30, 0x3c, 0x69, 0x00, 0x55, 0x59, 0x0c,
+	0xa5, 0xf0, 0xfc, 0xa9, 0xc0, 0x95, 0x99, 0xcc,
+	0xcc, 0x99, 0x95, 0xc0, 0xa9, 0xfc, 0xf0, 0xa5,
+	0x30, 0x65, 0x69, 0x3c, 0x55, 0x00, 0x0c, 0x59,
+	0x59, 0x0c, 0x00, 0x55, 0x3c, 0x69, 0x65, 0x30,
+	0x3c, 0x69, 0x65, 0x30, 0x59, 0x0c, 0x00, 0x55,
+	0x55, 0x00, 0x0c, 0x59, 0x30, 0x65, 0x69, 0x3c,
+	0xa9, 0xfc, 0xf0, 0xa5, 0xcc, 0x99, 0x95, 0xc0,
+	0xc0, 0x95, 0x99, 0xcc, 0xa5, 0xf0, 0xfc, 0xa9,
+	0xa9, 0xfc, 0xf0, 0xa5, 0xcc, 0x99, 0x95, 0xc0,
+	0xc0, 0x95, 0x99, 0xcc, 0xa5, 0xf0, 0xfc, 0xa9,
+	0x3c, 0x69, 0x65, 0x30, 0x59, 0x0c, 0x00, 0x55,
+	0x55, 0x00, 0x0c, 0x59, 0x30, 0x65, 0x69, 0x3c,
+	0x30, 0x65, 0x69, 0x3c, 0x55, 0x00, 0x0c, 0x59,
+	0x59, 0x0c, 0x00, 0x55, 0x3c, 0x69, 0x65, 0x30,
+	0xa5, 0xf0, 0xfc, 0xa9, 0xc0, 0x95, 0x99, 0xcc,
+	0xcc, 0x99, 0x95, 0xc0, 0xa9, 0xfc, 0xf0, 0xa5,
+	0x0c, 0x59, 0x55, 0x00, 0x69, 0x3c, 0x30, 0x65,
+	0x65, 0x30, 0x3c, 0x69, 0x00, 0x55, 0x59, 0x0c,
+	0x99, 0xcc, 0xc0, 0x95, 0xfc, 0xa9, 0xa5, 0xf0,
+	0xf0, 0xa5, 0xa9, 0xfc, 0x95, 0xc0, 0xcc, 0x99,
+	0x95, 0xc0, 0xcc, 0x99, 0xf0, 0xa5, 0xa9, 0xfc,
+	0xfc, 0xa9, 0xa5, 0xf0, 0x99, 0xcc, 0xc0, 0x95,
+	0x00, 0x55, 0x59, 0x0c, 0x65, 0x30, 0x3c, 0x69,
+	0x69, 0x3c, 0x30, 0x65, 0x0c, 0x59, 0x55, 0x00,
+};
+
+/* Count the bits in an unsigned char or a U32 */
+
+static int yaffs_CountBits(unsigned char x)
+{
+	int r = 0;
+	while (x) {
+		if (x & 1)
+			r++;
+		x >>= 1;
+	}
+	return r;
+}
+
+static int yaffs_CountBits32(unsigned x)
+{
+	int r = 0;
+	while (x) {
+		if (x & 1)
+			r++;
+		x >>= 1;
+	}
+	return r;
+}
+
+/* Calculate the ECC for a 256-byte block of data */
+void yaffs_ECCCalculate(const unsigned char *data, unsigned char *ecc)
+{
+	unsigned int i;
+
+	unsigned char col_parity = 0;
+	unsigned char line_parity = 0;
+	unsigned char line_parity_prime = 0;
+	unsigned char t;
+	unsigned char b;
+
+	for (i = 0; i < 256; i++) {
+		b = column_parity_table[*data++];
+		col_parity ^= b;
+
+		if (b & 0x01)	// odd number of bits in the byte
+		{
+			line_parity ^= i;
+			line_parity_prime ^= ~i;
+		}
+
+	}
+
+	ecc[2] = (~col_parity) | 0x03;
+
+	t = 0;
+	if (line_parity & 0x80)
+		t |= 0x80;
+	if (line_parity_prime & 0x80)
+		t |= 0x40;
+	if (line_parity & 0x40)
+		t |= 0x20;
+	if (line_parity_prime & 0x40)
+		t |= 0x10;
+	if (line_parity & 0x20)
+		t |= 0x08;
+	if (line_parity_prime & 0x20)
+		t |= 0x04;
+	if (line_parity & 0x10)
+		t |= 0x02;
+	if (line_parity_prime & 0x10)
+		t |= 0x01;
+	ecc[1] = ~t;
+
+	t = 0;
+	if (line_parity & 0x08)
+		t |= 0x80;
+	if (line_parity_prime & 0x08)
+		t |= 0x40;
+	if (line_parity & 0x04)
+		t |= 0x20;
+	if (line_parity_prime & 0x04)
+		t |= 0x10;
+	if (line_parity & 0x02)
+		t |= 0x08;
+	if (line_parity_prime & 0x02)
+		t |= 0x04;
+	if (line_parity & 0x01)
+		t |= 0x02;
+	if (line_parity_prime & 0x01)
+		t |= 0x01;
+	ecc[0] = ~t;
+
+#ifdef CONFIG_YAFFS_ECC_WRONG_ORDER
+	// Swap the bytes into the wrong order
+	t = ecc[0];
+	ecc[0] = ecc[1];
+	ecc[1] = t;
+#endif
+}
+
+
+/* Correct the ECC on a 256 byte block of data */
+
+int yaffs_ECCCorrect(unsigned char *data, unsigned char *read_ecc,
+		     const unsigned char *test_ecc)
+{
+	unsigned char d0, d1, d2;	/* deltas */
+
+	d0 = read_ecc[0] ^ test_ecc[0];
+	d1 = read_ecc[1] ^ test_ecc[1];
+	d2 = read_ecc[2] ^ test_ecc[2];
+
+	if ((d0 | d1 | d2) == 0)
+		return 0; /* no error */
+
+	if (((d0 ^ (d0 >> 1)) & 0x55) == 0x55 &&
+	    ((d1 ^ (d1 >> 1)) & 0x55) == 0x55 &&
+	    ((d2 ^ (d2 >> 1)) & 0x54) == 0x54) {
+		/* Single bit (recoverable) error in data */
+
+		unsigned byte;
+		unsigned bit;
+
+#ifdef CONFIG_YAFFS_ECC_WRONG_ORDER
+		// swap the bytes to correct for the wrong order
+		unsigned char t;
+
+		t = d0;
+		d0 = d1;
+		d1 = t;
+#endif
+
+		bit = byte = 0;
+
+		if (d1 & 0x80)
+			byte |= 0x80;
+		if (d1 & 0x20)
+			byte |= 0x40;
+		if (d1 & 0x08)
+			byte |= 0x20;
+		if (d1 & 0x02)
+			byte |= 0x10;
+		if (d0 & 0x80)
+			byte |= 0x08;
+		if (d0 & 0x20)
+			byte |= 0x04;
+		if (d0 & 0x08)
+			byte |= 0x02;
+		if (d0 & 0x02)
+			byte |= 0x01;
+
+		if (d2 & 0x80)
+			bit |= 0x04;
+		if (d2 & 0x20)
+			bit |= 0x02;
+		if (d2 & 0x08)
+			bit |= 0x01;
+
+		data[byte] ^= (1 << bit);
+
+		return 1; /* Corrected the error */
+	}
+
+	if ((yaffs_CountBits(d0) +
+	     yaffs_CountBits(d1) +
+	     yaffs_CountBits(d2)) ==  1) {
+		/* Reccoverable error in ecc */
+
+		read_ecc[0] = test_ecc[0];
+		read_ecc[1] = test_ecc[1];
+		read_ecc[2] = test_ecc[2];
+
+		return 1; /* Corrected the error */
+	}
+
+	/* Unrecoverable error */
+
+	return -1;
+
+}
+
+
+/*
+ * ECCxxxOther does ECC calcs on arbitrary n bytes of data
+ */
+void yaffs_ECCCalculateOther(const unsigned char *data, unsigned nBytes,
+			     yaffs_ECCOther * eccOther)
+{
+	unsigned int i;
+
+	unsigned char col_parity = 0;
+	unsigned line_parity = 0;
+	unsigned line_parity_prime = 0;
+	unsigned char b;
+
+	for (i = 0; i < nBytes; i++) {
+		b = column_parity_table[*data++];
+		col_parity ^= b;
+
+		if (b & 0x01)	 {
+			/* odd number of bits in the byte */
+			line_parity ^= i;
+			line_parity_prime ^= ~i;
+		}
+
+	}
+
+	eccOther->colParity = (col_parity >> 2) & 0x3f;
+	eccOther->lineParity = line_parity;
+	eccOther->lineParityPrime = line_parity_prime;
+}
+
+int yaffs_ECCCorrectOther(unsigned char *data, unsigned nBytes,
+			  yaffs_ECCOther * read_ecc,
+			  const yaffs_ECCOther * test_ecc)
+{
+	unsigned char cDelta;	/* column parity delta */
+	unsigned lDelta;	/* line parity delta */
+	unsigned lDeltaPrime;	/* line parity delta */
+	unsigned bit;
+
+	cDelta = read_ecc->colParity ^ test_ecc->colParity;
+	lDelta = read_ecc->lineParity ^ test_ecc->lineParity;
+	lDeltaPrime = read_ecc->lineParityPrime ^ test_ecc->lineParityPrime;
+
+	if ((cDelta | lDelta | lDeltaPrime) == 0)
+		return 0; /* no error */
+
+	if (lDelta == ~lDeltaPrime &&
+	    (((cDelta ^ (cDelta >> 1)) & 0x15) == 0x15))
+	{
+		/* Single bit (recoverable) error in data */
+
+		bit = 0;
+
+		if (cDelta & 0x20)
+			bit |= 0x04;
+		if (cDelta & 0x08)
+			bit |= 0x02;
+		if (cDelta & 0x02)
+			bit |= 0x01;
+
+		if(lDelta >= nBytes)
+			return -1;
+
+		data[lDelta] ^= (1 << bit);
+
+		return 1; /* corrected */
+	}
+
+	if ((yaffs_CountBits32(lDelta) + yaffs_CountBits32(lDeltaPrime) +
+	     yaffs_CountBits(cDelta)) == 1) {
+		/* Reccoverable error in ecc */
+
+		*read_ecc = *test_ecc;
+		return 1; /* corrected */
+	}
+
+	/* Unrecoverable error */
+
+	return -1;
+
+}
+
diff --git a/target/linux/generic/files/fs/yaffs2/yaffs_ecc.h b/target/linux/generic/files/fs/yaffs2/yaffs_ecc.h
new file mode 100644
index 0000000000..79bc3d1171
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/yaffs_ecc.h
@@ -0,0 +1,44 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ *   for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+ /*
+  * This code implements the ECC algorithm used in SmartMedia.
+  *
+  * The ECC comprises 22 bits of parity information and is stuffed into 3 bytes.
+  * The two unused bit are set to 1.
+  * The ECC can correct single bit errors in a 256-byte page of data. Thus, two such ECC
+  * blocks are used on a 512-byte NAND page.
+  *
+  */
+
+#ifndef __YAFFS_ECC_H__
+#define __YAFFS_ECC_H__
+
+typedef struct {
+	unsigned char colParity;
+	unsigned lineParity;
+	unsigned lineParityPrime;
+} yaffs_ECCOther;
+
+void yaffs_ECCCalculate(const unsigned char *data, unsigned char *ecc);
+int yaffs_ECCCorrect(unsigned char *data, unsigned char *read_ecc,
+		     const unsigned char *test_ecc);
+
+void yaffs_ECCCalculateOther(const unsigned char *data, unsigned nBytes,
+			     yaffs_ECCOther * ecc);
+int yaffs_ECCCorrectOther(unsigned char *data, unsigned nBytes,
+			  yaffs_ECCOther * read_ecc,
+			  const yaffs_ECCOther * test_ecc);
+#endif
diff --git a/target/linux/generic/files/fs/yaffs2/yaffs_fs.c b/target/linux/generic/files/fs/yaffs2/yaffs_fs.c
new file mode 100644
index 0000000000..67001b10e6
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/yaffs_fs.c
@@ -0,0 +1,2299 @@
+/*
+ * YAFFS: Yet Another Flash File System. A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ *   for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ * Acknowledgements:
+ * Luc van OostenRyck for numerous patches.
+ * Nick Bane for numerous patches.
+ * Nick Bane for 2.5/2.6 integration.
+ * Andras Toth for mknod rdev issue.
+ * Michael Fischer for finding the problem with inode inconsistency.
+ * Some code bodily lifted from JFFS
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ *
+ * This is the file system front-end to YAFFS that hooks it up to
+ * the VFS.
+ *
+ * Special notes:
+ * >> 2.4: sb->u.generic_sbp points to the yaffs_Device associated with
+ *         this superblock
+ * >> 2.6: sb->s_fs_info  points to the yaffs_Device associated with this
+ *         superblock
+ * >> inode->u.generic_ip points to the associated yaffs_Object.
+ */
+
+const char *yaffs_fs_c_version =
+    "$Id: yaffs_fs.c,v 1.63 2007-09-19 20:35:40 imcd Exp $";
+extern const char *yaffs_guts_c_version;
+
+#include <linux/version.h>
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19))
+#include <linux/config.h>
+#endif
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/fs.h>
+#include <linux/proc_fs.h>
+#include <linux/smp_lock.h>
+#include <linux/pagemap.h>
+#include <linux/mtd/mtd.h>
+#include <linux/interrupt.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+
+#include <linux/statfs.h>	/* Added NCB 15-8-2003 */
+#include <asm/statfs.h>
+#define UnlockPage(p) unlock_page(p)
+#define Page_Uptodate(page)	test_bit(PG_uptodate, &(page)->flags)
+
+/* FIXME: use sb->s_id instead ? */
+#define yaffs_devname(sb, buf)	bdevname(sb->s_bdev, buf)
+
+#else
+
+#include <linux/locks.h>
+#define	BDEVNAME_SIZE		0
+#define	yaffs_devname(sb, buf)	kdevname(sb->s_dev)
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
+/* added NCB 26/5/2006 for 2.4.25-vrs2-tcl1 kernel */
+#define __user
+#endif
+
+#endif
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+#define WRITE_SIZE_STR "writesize"
+#define WRITE_SIZE(mtd) (mtd)->writesize
+#else
+#define WRITE_SIZE_STR "oobblock"
+#define WRITE_SIZE(mtd) (mtd)->oobblock
+#endif
+
+#include <asm/uaccess.h>
+
+#include "yportenv.h"
+#include "yaffs_guts.h"
+
+#include <linux/mtd/mtd.h>
+#include "yaffs_mtdif.h"
+#include "yaffs_mtdif1.h"
+#include "yaffs_mtdif2.h"
+
+unsigned int yaffs_traceMask = YAFFS_TRACE_BAD_BLOCKS;
+unsigned int yaffs_wr_attempts = YAFFS_WR_ATTEMPTS;
+
+/* Module Parameters */
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+module_param(yaffs_traceMask,uint,0644);
+module_param(yaffs_wr_attempts,uint,0644);
+#else
+MODULE_PARM(yaffs_traceMask,"i");
+MODULE_PARM(yaffs_wr_attempts,"i");
+#endif
+
+/*#define T(x) printk x */
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18))
+#define yaffs_InodeToObjectLV(iptr) (iptr)->i_private
+#else
+#define yaffs_InodeToObjectLV(iptr) (iptr)->u.generic_ip
+#endif
+
+#define yaffs_InodeToObject(iptr) ((yaffs_Object *)(yaffs_InodeToObjectLV(iptr)))
+#define yaffs_DentryToObject(dptr) yaffs_InodeToObject((dptr)->d_inode)
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+#define yaffs_SuperToDevice(sb)	((yaffs_Device *)sb->s_fs_info)
+#else
+#define yaffs_SuperToDevice(sb)	((yaffs_Device *)sb->u.generic_sbp)
+#endif
+
+static void yaffs_put_super(struct super_block *sb);
+
+static ssize_t yaffs_file_write(struct file *f, const char *buf, size_t n,
+				loff_t * pos);
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+static int yaffs_file_flush(struct file *file, fl_owner_t id);
+#else
+static int yaffs_file_flush(struct file *file);
+#endif
+
+static int yaffs_sync_object(struct file *file, struct dentry *dentry,
+			     int datasync);
+
+static int yaffs_readdir(struct file *f, void *dirent, filldir_t filldir);
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode,
+			struct nameidata *n);
+static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry,
+				   struct nameidata *n);
+#else
+static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode);
+static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry);
+#endif
+static int yaffs_link(struct dentry *old_dentry, struct inode *dir,
+		      struct dentry *dentry);
+static int yaffs_unlink(struct inode *dir, struct dentry *dentry);
+static int yaffs_symlink(struct inode *dir, struct dentry *dentry,
+			 const char *symname);
+static int yaffs_mkdir(struct inode *dir, struct dentry *dentry, int mode);
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode,
+		       dev_t dev);
+#else
+static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode,
+		       int dev);
+#endif
+static int yaffs_rename(struct inode *old_dir, struct dentry *old_dentry,
+			struct inode *new_dir, struct dentry *new_dentry);
+static int yaffs_setattr(struct dentry *dentry, struct iattr *attr);
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+static int yaffs_sync_fs(struct super_block *sb, int wait);
+static void yaffs_write_super(struct super_block *sb);
+#else
+static int yaffs_sync_fs(struct super_block *sb);
+static int yaffs_write_super(struct super_block *sb);
+#endif
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+static int yaffs_statfs(struct dentry *dentry, struct kstatfs *buf);
+#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+static int yaffs_statfs(struct super_block *sb, struct kstatfs *buf);
+#else
+static int yaffs_statfs(struct super_block *sb, struct statfs *buf);
+#endif
+static void yaffs_read_inode(struct inode *inode);
+
+static void yaffs_put_inode(struct inode *inode);
+static void yaffs_delete_inode(struct inode *);
+static void yaffs_clear_inode(struct inode *);
+
+static int yaffs_readpage(struct file *file, struct page *page);
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+static int yaffs_writepage(struct page *page, struct writeback_control *wbc);
+#else
+static int yaffs_writepage(struct page *page);
+#endif
+static int yaffs_prepare_write(struct file *f, struct page *pg,
+			       unsigned offset, unsigned to);
+static int yaffs_commit_write(struct file *f, struct page *pg, unsigned offset,
+			      unsigned to);
+
+static int yaffs_readlink(struct dentry *dentry, char __user * buffer,
+			  int buflen);
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
+static void *yaffs_follow_link(struct dentry *dentry, struct nameidata *nd);
+#else
+static int yaffs_follow_link(struct dentry *dentry, struct nameidata *nd);
+#endif
+
+static struct address_space_operations yaffs_file_address_operations = {
+	.readpage = yaffs_readpage,
+	.writepage = yaffs_writepage,
+	.prepare_write = yaffs_prepare_write,
+	.commit_write = yaffs_commit_write,
+};
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,22))
+static struct file_operations yaffs_file_operations = {
+	.read = do_sync_read,
+	.write = do_sync_write,
+	.aio_read = generic_file_aio_read,
+	.aio_write = generic_file_aio_write,
+	.mmap = generic_file_mmap,
+	.flush = yaffs_file_flush,
+	.fsync = yaffs_sync_object,
+	.splice_read = generic_file_splice_read,
+	.splice_write = generic_file_splice_write,
+};
+
+#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18))
+
+static struct file_operations yaffs_file_operations = {
+	.read = do_sync_read,
+	.write = do_sync_write,
+	.aio_read = generic_file_aio_read,
+	.aio_write = generic_file_aio_write,
+	.mmap = generic_file_mmap,
+	.flush = yaffs_file_flush,
+	.fsync = yaffs_sync_object,
+	.sendfile = generic_file_sendfile,
+};
+
+#else
+
+static struct file_operations yaffs_file_operations = {
+	.read = generic_file_read,
+	.write = generic_file_write,
+	.mmap = generic_file_mmap,
+	.flush = yaffs_file_flush,
+	.fsync = yaffs_sync_object,
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+	.sendfile = generic_file_sendfile,
+#endif
+};
+#endif
+
+static struct inode_operations yaffs_file_inode_operations = {
+	.setattr = yaffs_setattr,
+};
+
+static struct inode_operations yaffs_symlink_inode_operations = {
+	.readlink = yaffs_readlink,
+	.follow_link = yaffs_follow_link,
+	.setattr = yaffs_setattr,
+};
+
+static struct inode_operations yaffs_dir_inode_operations = {
+	.create = yaffs_create,
+	.lookup = yaffs_lookup,
+	.link = yaffs_link,
+	.unlink = yaffs_unlink,
+	.symlink = yaffs_symlink,
+	.mkdir = yaffs_mkdir,
+	.rmdir = yaffs_unlink,
+	.mknod = yaffs_mknod,
+	.rename = yaffs_rename,
+	.setattr = yaffs_setattr,
+};
+
+static struct file_operations yaffs_dir_operations = {
+	.read = generic_read_dir,
+	.readdir = yaffs_readdir,
+	.fsync = yaffs_sync_object,
+};
+
+static struct super_operations yaffs_super_ops = {
+	.statfs = yaffs_statfs,
+	.read_inode = yaffs_read_inode,
+	.put_inode = yaffs_put_inode,
+	.put_super = yaffs_put_super,
+	.delete_inode = yaffs_delete_inode,
+	.clear_inode = yaffs_clear_inode,
+	.sync_fs = yaffs_sync_fs,
+	.write_super = yaffs_write_super,
+};
+
+static void yaffs_GrossLock(yaffs_Device * dev)
+{
+	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs locking\n"));
+
+	down(&dev->grossLock);
+}
+
+static void yaffs_GrossUnlock(yaffs_Device * dev)
+{
+	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs unlocking\n"));
+	up(&dev->grossLock);
+
+}
+
+static int yaffs_readlink(struct dentry *dentry, char __user * buffer,
+			  int buflen)
+{
+	unsigned char *alias;
+	int ret;
+
+	yaffs_Device *dev = yaffs_DentryToObject(dentry)->myDev;
+
+	yaffs_GrossLock(dev);
+
+	alias = yaffs_GetSymlinkAlias(yaffs_DentryToObject(dentry));
+
+	yaffs_GrossUnlock(dev);
+
+	if (!alias)
+		return -ENOMEM;
+
+	ret = vfs_readlink(dentry, buffer, buflen, alias);
+	kfree(alias);
+	return ret;
+}
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
+static void *yaffs_follow_link(struct dentry *dentry, struct nameidata *nd)
+#else
+static int yaffs_follow_link(struct dentry *dentry, struct nameidata *nd)
+#endif
+{
+	unsigned char *alias;
+	int ret;
+	yaffs_Device *dev = yaffs_DentryToObject(dentry)->myDev;
+
+	yaffs_GrossLock(dev);
+
+	alias = yaffs_GetSymlinkAlias(yaffs_DentryToObject(dentry));
+
+	yaffs_GrossUnlock(dev);
+
+	if (!alias)
+        {
+		ret = -ENOMEM;
+		goto out;
+        }
+
+	ret = vfs_follow_link(nd, alias);
+	kfree(alias);
+out:
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
+	return ERR_PTR (ret);
+#else
+	return ret;
+#endif
+}
+
+struct inode *yaffs_get_inode(struct super_block *sb, int mode, int dev,
+			      yaffs_Object * obj);
+
+/*
+ * Lookup is used to find objects in the fs
+ */
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+
+static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry,
+				   struct nameidata *n)
+#else
+static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry)
+#endif
+{
+	yaffs_Object *obj;
+	struct inode *inode = NULL;	/* NCB 2.5/2.6 needs NULL here */
+
+	yaffs_Device *dev = yaffs_InodeToObject(dir)->myDev;
+
+	yaffs_GrossLock(dev);
+
+	T(YAFFS_TRACE_OS,
+	  (KERN_DEBUG "yaffs_lookup for %d:%s\n",
+	   yaffs_InodeToObject(dir)->objectId, dentry->d_name.name));
+
+	obj =
+	    yaffs_FindObjectByName(yaffs_InodeToObject(dir),
+				   dentry->d_name.name);
+
+	obj = yaffs_GetEquivalentObject(obj);	/* in case it was a hardlink */
+
+	/* Can't hold gross lock when calling yaffs_get_inode() */
+	yaffs_GrossUnlock(dev);
+
+	if (obj) {
+		T(YAFFS_TRACE_OS,
+		  (KERN_DEBUG "yaffs_lookup found %d\n", obj->objectId));
+
+		inode = yaffs_get_inode(dir->i_sb, obj->yst_mode, 0, obj);
+
+		if (inode) {
+			T(YAFFS_TRACE_OS,
+			  (KERN_DEBUG "yaffs_loookup dentry \n"));
+/* #if 0 asserted by NCB for 2.5/6 compatability - falls through to
+ * d_add even if NULL inode */
+#if 0
+			/*dget(dentry); // try to solve directory bug */
+			d_add(dentry, inode);
+
+			/* return dentry; */
+			return NULL;
+#endif
+		}
+
+	} else {
+		T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_lookup not found\n"));
+
+	}
+
+/* added NCB for 2.5/6 compatability - forces add even if inode is
+ * NULL which creates dentry hash */
+	d_add(dentry, inode);
+
+	return NULL;
+	/*      return (ERR_PTR(-EIO)); */
+
+}
+
+/* For now put inode is just for debugging
+ * Put inode is called when the inode **structure** is put.
+ */
+static void yaffs_put_inode(struct inode *inode)
+{
+	T(YAFFS_TRACE_OS,
+	  ("yaffs_put_inode: ino %d, count %d\n", (int)inode->i_ino,
+	   atomic_read(&inode->i_count)));
+
+}
+
+/* clear is called to tell the fs to release any per-inode data it holds */
+static void yaffs_clear_inode(struct inode *inode)
+{
+	yaffs_Object *obj;
+	yaffs_Device *dev;
+
+	obj = yaffs_InodeToObject(inode);
+
+	T(YAFFS_TRACE_OS,
+	  ("yaffs_clear_inode: ino %d, count %d %s\n", (int)inode->i_ino,
+	   atomic_read(&inode->i_count),
+	   obj ? "object exists" : "null object"));
+
+	if (obj) {
+		dev = obj->myDev;
+		yaffs_GrossLock(dev);
+
+		/* Clear the association between the inode and
+		 * the yaffs_Object.
+		 */
+		obj->myInode = NULL;
+		yaffs_InodeToObjectLV(inode) = NULL;
+
+		/* If the object freeing was deferred, then the real
+		 * free happens now.
+		 * This should fix the inode inconsistency problem.
+		 */
+
+		yaffs_HandleDeferedFree(obj);
+
+		yaffs_GrossUnlock(dev);
+	}
+
+}
+
+/* delete is called when the link count is zero and the inode
+ * is put (ie. nobody wants to know about it anymore, time to
+ * delete the file).
+ * NB Must call clear_inode()
+ */
+static void yaffs_delete_inode(struct inode *inode)
+{
+	yaffs_Object *obj = yaffs_InodeToObject(inode);
+	yaffs_Device *dev;
+
+	T(YAFFS_TRACE_OS,
+	  ("yaffs_delete_inode: ino %d, count %d %s\n", (int)inode->i_ino,
+	   atomic_read(&inode->i_count),
+	   obj ? "object exists" : "null object"));
+
+	if (obj) {
+		dev = obj->myDev;
+		yaffs_GrossLock(dev);
+		yaffs_DeleteFile(obj);
+		yaffs_GrossUnlock(dev);
+	}
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
+        truncate_inode_pages (&inode->i_data, 0);
+#endif
+	clear_inode(inode);
+}
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+static int yaffs_file_flush(struct file *file, fl_owner_t id)
+#else
+static int yaffs_file_flush(struct file *file)
+#endif
+{
+	yaffs_Object *obj = yaffs_DentryToObject(file->f_dentry);
+
+	yaffs_Device *dev = obj->myDev;
+
+	T(YAFFS_TRACE_OS,
+	  (KERN_DEBUG "yaffs_file_flush object %d (%s)\n", obj->objectId,
+	   obj->dirty ? "dirty" : "clean"));
+
+	yaffs_GrossLock(dev);
+
+	yaffs_FlushFile(obj, 1);
+
+	yaffs_GrossUnlock(dev);
+
+	return 0;
+}
+
+static int yaffs_readpage_nolock(struct file *f, struct page *pg)
+{
+	/* Lifted from jffs2 */
+
+	yaffs_Object *obj;
+	unsigned char *pg_buf;
+	int ret;
+
+	yaffs_Device *dev;
+
+	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_readpage at %08x, size %08x\n",
+			   (unsigned)(pg->index << PAGE_CACHE_SHIFT),
+			   (unsigned)PAGE_CACHE_SIZE));
+
+	obj = yaffs_DentryToObject(f->f_dentry);
+
+	dev = obj->myDev;
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+	BUG_ON(!PageLocked(pg));
+#else
+	if (!PageLocked(pg))
+		PAGE_BUG(pg);
+#endif
+
+	pg_buf = kmap(pg);
+	/* FIXME: Can kmap fail? */
+
+	yaffs_GrossLock(dev);
+
+	ret =
+	    yaffs_ReadDataFromFile(obj, pg_buf, pg->index << PAGE_CACHE_SHIFT,
+				   PAGE_CACHE_SIZE);
+
+	yaffs_GrossUnlock(dev);
+
+	if (ret >= 0)
+		ret = 0;
+
+	if (ret) {
+		ClearPageUptodate(pg);
+		SetPageError(pg);
+	} else {
+		SetPageUptodate(pg);
+		ClearPageError(pg);
+	}
+
+	flush_dcache_page(pg);
+	kunmap(pg);
+
+	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_readpage done\n"));
+	return ret;
+}
+
+static int yaffs_readpage_unlock(struct file *f, struct page *pg)
+{
+	int ret = yaffs_readpage_nolock(f, pg);
+	UnlockPage(pg);
+	return ret;
+}
+
+static int yaffs_readpage(struct file *f, struct page *pg)
+{
+	return yaffs_readpage_unlock(f, pg);
+}
+
+/* writepage inspired by/stolen from smbfs */
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+static int yaffs_writepage(struct page *page, struct writeback_control *wbc)
+#else
+static int yaffs_writepage(struct page *page)
+#endif
+{
+	struct address_space *mapping = page->mapping;
+	loff_t offset = (loff_t) page->index << PAGE_CACHE_SHIFT;
+	struct inode *inode;
+	unsigned long end_index;
+	char *buffer;
+	yaffs_Object *obj;
+	int nWritten = 0;
+	unsigned nBytes;
+
+	if (!mapping)
+		BUG();
+	inode = mapping->host;
+	if (!inode)
+		BUG();
+
+	if (offset > inode->i_size) {
+		T(YAFFS_TRACE_OS,
+		  (KERN_DEBUG
+		   "yaffs_writepage at %08x, inode size = %08x!!!\n",
+		   (unsigned)(page->index << PAGE_CACHE_SHIFT),
+		   (unsigned)inode->i_size));
+		T(YAFFS_TRACE_OS,
+		  (KERN_DEBUG "                -> don't care!!\n"));
+		unlock_page(page);
+		return 0;
+	}
+
+	end_index = inode->i_size >> PAGE_CACHE_SHIFT;
+
+	/* easy case */
+	if (page->index < end_index) {
+		nBytes = PAGE_CACHE_SIZE;
+	} else {
+		nBytes = inode->i_size & (PAGE_CACHE_SIZE - 1);
+	}
+
+	get_page(page);
+
+	buffer = kmap(page);
+
+	obj = yaffs_InodeToObject(inode);
+	yaffs_GrossLock(obj->myDev);
+
+	T(YAFFS_TRACE_OS,
+	  (KERN_DEBUG "yaffs_writepage at %08x, size %08x\n",
+	   (unsigned)(page->index << PAGE_CACHE_SHIFT), nBytes));
+	T(YAFFS_TRACE_OS,
+	  (KERN_DEBUG "writepag0: obj = %05x, ino = %05x\n",
+	   (int)obj->variant.fileVariant.fileSize, (int)inode->i_size));
+
+	nWritten =
+	    yaffs_WriteDataToFile(obj, buffer, page->index << PAGE_CACHE_SHIFT,
+				  nBytes, 0);
+
+	T(YAFFS_TRACE_OS,
+	  (KERN_DEBUG "writepag1: obj = %05x, ino = %05x\n",
+	   (int)obj->variant.fileVariant.fileSize, (int)inode->i_size));
+
+	yaffs_GrossUnlock(obj->myDev);
+
+	kunmap(page);
+	SetPageUptodate(page);
+	UnlockPage(page);
+	put_page(page);
+
+	return (nWritten == nBytes) ? 0 : -ENOSPC;
+}
+
+static int yaffs_prepare_write(struct file *f, struct page *pg,
+			       unsigned offset, unsigned to)
+{
+
+	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_prepair_write\n"));
+	if (!Page_Uptodate(pg) && (offset || to < PAGE_CACHE_SIZE))
+		return yaffs_readpage_nolock(f, pg);
+
+	return 0;
+
+}
+
+static int yaffs_commit_write(struct file *f, struct page *pg, unsigned offset,
+			      unsigned to)
+{
+
+	void *addr = page_address(pg) + offset;
+	loff_t pos = (((loff_t) pg->index) << PAGE_CACHE_SHIFT) + offset;
+	int nBytes = to - offset;
+	int nWritten;
+
+	unsigned spos = pos;
+	unsigned saddr = (unsigned)addr;
+
+	T(YAFFS_TRACE_OS,
+	  (KERN_DEBUG "yaffs_commit_write addr %x pos %x nBytes %d\n", saddr,
+	   spos, nBytes));
+
+	nWritten = yaffs_file_write(f, addr, nBytes, &pos);
+
+	if (nWritten != nBytes) {
+		T(YAFFS_TRACE_OS,
+		  (KERN_DEBUG
+		   "yaffs_commit_write not same size nWritten %d  nBytes %d\n",
+		   nWritten, nBytes));
+		SetPageError(pg);
+		ClearPageUptodate(pg);
+	} else {
+		SetPageUptodate(pg);
+	}
+
+	T(YAFFS_TRACE_OS,
+	  (KERN_DEBUG "yaffs_commit_write returning %d\n",
+	   nWritten == nBytes ? 0 : nWritten));
+
+	return nWritten == nBytes ? 0 : nWritten;
+
+}
+
+static void yaffs_FillInodeFromObject(struct inode *inode, yaffs_Object * obj)
+{
+	if (inode && obj) {
+
+
+		/* Check mode against the variant type and attempt to repair if broken. */
+ 		__u32 mode = obj->yst_mode;
+ 		switch( obj->variantType ){
+ 		case YAFFS_OBJECT_TYPE_FILE :
+ 		        if( ! S_ISREG(mode) ){
+ 			        obj->yst_mode &= ~S_IFMT;
+ 			        obj->yst_mode |= S_IFREG;
+ 			}
+
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_SYMLINK :
+ 		        if( ! S_ISLNK(mode) ){
+ 			        obj->yst_mode &= ~S_IFMT;
+ 				obj->yst_mode |= S_IFLNK;
+ 			}
+
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_DIRECTORY :
+ 		        if( ! S_ISDIR(mode) ){
+ 			        obj->yst_mode &= ~S_IFMT;
+ 			        obj->yst_mode |= S_IFDIR;
+ 			}
+
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_UNKNOWN :
+ 		case YAFFS_OBJECT_TYPE_HARDLINK :
+ 		case YAFFS_OBJECT_TYPE_SPECIAL :
+ 		default:
+ 		        /* TODO? */
+ 		        break;
+ 		}
+
+		inode->i_ino = obj->objectId;
+		inode->i_mode = obj->yst_mode;
+		inode->i_uid = obj->yst_uid;
+		inode->i_gid = obj->yst_gid;
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19))
+		inode->i_blksize = inode->i_sb->s_blocksize;
+#endif
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+
+		inode->i_rdev = old_decode_dev(obj->yst_rdev);
+		inode->i_atime.tv_sec = (time_t) (obj->yst_atime);
+		inode->i_atime.tv_nsec = 0;
+		inode->i_mtime.tv_sec = (time_t) obj->yst_mtime;
+		inode->i_mtime.tv_nsec = 0;
+		inode->i_ctime.tv_sec = (time_t) obj->yst_ctime;
+		inode->i_ctime.tv_nsec = 0;
+#else
+		inode->i_rdev = obj->yst_rdev;
+		inode->i_atime = obj->yst_atime;
+		inode->i_mtime = obj->yst_mtime;
+		inode->i_ctime = obj->yst_ctime;
+#endif
+		inode->i_size = yaffs_GetObjectFileLength(obj);
+		inode->i_blocks = (inode->i_size + 511) >> 9;
+
+		inode->i_nlink = yaffs_GetObjectLinkCount(obj);
+
+		T(YAFFS_TRACE_OS,
+		  (KERN_DEBUG
+		   "yaffs_FillInode mode %x uid %d gid %d size %d count %d\n",
+		   inode->i_mode, inode->i_uid, inode->i_gid,
+		   (int)inode->i_size, atomic_read(&inode->i_count)));
+
+		switch (obj->yst_mode & S_IFMT) {
+		default:	/* fifo, device or socket */
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+			init_special_inode(inode, obj->yst_mode,
+					   old_decode_dev(obj->yst_rdev));
+#else
+			init_special_inode(inode, obj->yst_mode,
+					   (dev_t) (obj->yst_rdev));
+#endif
+			break;
+		case S_IFREG:	/* file */
+			inode->i_op = &yaffs_file_inode_operations;
+			inode->i_fop = &yaffs_file_operations;
+			inode->i_mapping->a_ops =
+			    &yaffs_file_address_operations;
+			break;
+		case S_IFDIR:	/* directory */
+			inode->i_op = &yaffs_dir_inode_operations;
+			inode->i_fop = &yaffs_dir_operations;
+			break;
+		case S_IFLNK:	/* symlink */
+			inode->i_op = &yaffs_symlink_inode_operations;
+			break;
+		}
+
+		yaffs_InodeToObjectLV(inode) = obj;
+
+		obj->myInode = inode;
+
+	} else {
+		T(YAFFS_TRACE_OS,
+		  (KERN_DEBUG "yaffs_FileInode invalid parameters\n"));
+	}
+
+}
+
+struct inode *yaffs_get_inode(struct super_block *sb, int mode, int dev,
+			      yaffs_Object * obj)
+{
+	struct inode *inode;
+
+	if (!sb) {
+		T(YAFFS_TRACE_OS,
+		  (KERN_DEBUG "yaffs_get_inode for NULL super_block!!\n"));
+		return NULL;
+
+	}
+
+	if (!obj) {
+		T(YAFFS_TRACE_OS,
+		  (KERN_DEBUG "yaffs_get_inode for NULL object!!\n"));
+		return NULL;
+
+	}
+
+	T(YAFFS_TRACE_OS,
+	  (KERN_DEBUG "yaffs_get_inode for object %d\n", obj->objectId));
+
+	inode = iget(sb, obj->objectId);
+
+	/* NB Side effect: iget calls back to yaffs_read_inode(). */
+	/* iget also increments the inode's i_count */
+	/* NB You can't be holding grossLock or deadlock will happen! */
+
+	return inode;
+}
+
+static ssize_t yaffs_file_write(struct file *f, const char *buf, size_t n,
+				loff_t * pos)
+{
+	yaffs_Object *obj;
+	int nWritten, ipos;
+	struct inode *inode;
+	yaffs_Device *dev;
+
+	obj = yaffs_DentryToObject(f->f_dentry);
+
+	dev = obj->myDev;
+
+	yaffs_GrossLock(dev);
+
+	inode = f->f_dentry->d_inode;
+
+	if (!S_ISBLK(inode->i_mode) && f->f_flags & O_APPEND) {
+		ipos = inode->i_size;
+	} else {
+		ipos = *pos;
+	}
+
+	if (!obj) {
+		T(YAFFS_TRACE_OS,
+		  (KERN_DEBUG "yaffs_file_write: hey obj is null!\n"));
+	} else {
+		T(YAFFS_TRACE_OS,
+		  (KERN_DEBUG
+		   "yaffs_file_write about to write writing %d bytes"
+		   "to object %d at %d\n",
+		   n, obj->objectId, ipos));
+	}
+
+	nWritten = yaffs_WriteDataToFile(obj, buf, ipos, n, 0);
+
+	T(YAFFS_TRACE_OS,
+	  (KERN_DEBUG "yaffs_file_write writing %d bytes, %d written at %d\n",
+	   n, nWritten, ipos));
+	if (nWritten > 0) {
+		ipos += nWritten;
+		*pos = ipos;
+		if (ipos > inode->i_size) {
+			inode->i_size = ipos;
+			inode->i_blocks = (ipos + 511) >> 9;
+
+			T(YAFFS_TRACE_OS,
+			  (KERN_DEBUG
+			   "yaffs_file_write size updated to %d bytes, "
+			   "%d blocks\n",
+			   ipos, (int)(inode->i_blocks)));
+		}
+
+	}
+	yaffs_GrossUnlock(dev);
+	return nWritten == 0 ? -ENOSPC : nWritten;
+}
+
+static int yaffs_readdir(struct file *f, void *dirent, filldir_t filldir)
+{
+	yaffs_Object *obj;
+	yaffs_Device *dev;
+	struct inode *inode = f->f_dentry->d_inode;
+	unsigned long offset, curoffs;
+	struct list_head *i;
+	yaffs_Object *l;
+
+	char name[YAFFS_MAX_NAME_LENGTH + 1];
+
+	obj = yaffs_DentryToObject(f->f_dentry);
+	dev = obj->myDev;
+
+	yaffs_GrossLock(dev);
+
+	offset = f->f_pos;
+
+	T(YAFFS_TRACE_OS, ("yaffs_readdir: starting at %d\n", (int)offset));
+
+	if (offset == 0) {
+		T(YAFFS_TRACE_OS,
+		  (KERN_DEBUG "yaffs_readdir: entry . ino %d \n",
+		   (int)inode->i_ino));
+		if (filldir(dirent, ".", 1, offset, inode->i_ino, DT_DIR)
+		    < 0) {
+			goto out;
+		}
+		offset++;
+		f->f_pos++;
+	}
+	if (offset == 1) {
+		T(YAFFS_TRACE_OS,
+		  (KERN_DEBUG "yaffs_readdir: entry .. ino %d \n",
+		   (int)f->f_dentry->d_parent->d_inode->i_ino));
+		if (filldir
+		    (dirent, "..", 2, offset,
+		     f->f_dentry->d_parent->d_inode->i_ino, DT_DIR) < 0) {
+			goto out;
+		}
+		offset++;
+		f->f_pos++;
+	}
+
+	curoffs = 1;
+
+	/* If the directory has changed since the open or last call to
+	   readdir, rewind to after the 2 canned entries. */
+
+	if (f->f_version != inode->i_version) {
+		offset = 2;
+		f->f_pos = offset;
+		f->f_version = inode->i_version;
+	}
+
+	list_for_each(i, &obj->variant.directoryVariant.children) {
+		curoffs++;
+		if (curoffs >= offset) {
+			l = list_entry(i, yaffs_Object, siblings);
+
+			yaffs_GetObjectName(l, name,
+					    YAFFS_MAX_NAME_LENGTH + 1);
+			T(YAFFS_TRACE_OS,
+			  (KERN_DEBUG "yaffs_readdir: %s inode %d\n", name,
+			   yaffs_GetObjectInode(l)));
+
+			if (filldir(dirent,
+				    name,
+				    strlen(name),
+				    offset,
+				    yaffs_GetObjectInode(l),
+				    yaffs_GetObjectType(l))
+			    < 0) {
+				goto up_and_out;
+			}
+
+			offset++;
+			f->f_pos++;
+		}
+	}
+
+      up_and_out:
+      out:
+
+	yaffs_GrossUnlock(dev);
+
+	return 0;
+}
+
+/*
+ * File creation. Allocate an inode, and we're done..
+ */
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode,
+		       dev_t rdev)
+#else
+static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode,
+		       int rdev)
+#endif
+{
+	struct inode *inode;
+
+	yaffs_Object *obj = NULL;
+	yaffs_Device *dev;
+
+	yaffs_Object *parent = yaffs_InodeToObject(dir);
+
+	int error = -ENOSPC;
+	uid_t uid = current->fsuid;
+	gid_t gid = (dir->i_mode & S_ISGID) ? dir->i_gid : current->fsgid;
+
+	if((dir->i_mode & S_ISGID) && S_ISDIR(mode))
+		mode |= S_ISGID;
+
+	if (parent) {
+		T(YAFFS_TRACE_OS,
+		  (KERN_DEBUG "yaffs_mknod: parent object %d type %d\n",
+		   parent->objectId, parent->variantType));
+	} else {
+		T(YAFFS_TRACE_OS,
+		  (KERN_DEBUG "yaffs_mknod: could not get parent object\n"));
+		return -EPERM;
+	}
+
+	T(YAFFS_TRACE_OS, ("yaffs_mknod: making oject for %s, "
+			   "mode %x dev %x\n",
+			   dentry->d_name.name, mode, rdev));
+
+	dev = parent->myDev;
+
+	yaffs_GrossLock(dev);
+
+	switch (mode & S_IFMT) {
+	default:
+		/* Special (socket, fifo, device...) */
+		T(YAFFS_TRACE_OS, (KERN_DEBUG
+				   "yaffs_mknod: making special\n"));
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+		obj =
+		    yaffs_MknodSpecial(parent, dentry->d_name.name, mode, uid,
+				       gid, old_encode_dev(rdev));
+#else
+		obj =
+		    yaffs_MknodSpecial(parent, dentry->d_name.name, mode, uid,
+				       gid, rdev);
+#endif
+		break;
+	case S_IFREG:		/* file          */
+		T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_mknod: making file\n"));
+		obj =
+		    yaffs_MknodFile(parent, dentry->d_name.name, mode, uid,
+				    gid);
+		break;
+	case S_IFDIR:		/* directory */
+		T(YAFFS_TRACE_OS,
+		  (KERN_DEBUG "yaffs_mknod: making directory\n"));
+		obj =
+		    yaffs_MknodDirectory(parent, dentry->d_name.name, mode,
+					 uid, gid);
+		break;
+	case S_IFLNK:		/* symlink */
+		T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_mknod: making file\n"));
+		obj = NULL;	/* Do we ever get here? */
+		break;
+	}
+
+	/* Can not call yaffs_get_inode() with gross lock held */
+	yaffs_GrossUnlock(dev);
+
+	if (obj) {
+		inode = yaffs_get_inode(dir->i_sb, mode, rdev, obj);
+		d_instantiate(dentry, inode);
+		T(YAFFS_TRACE_OS,
+		  (KERN_DEBUG "yaffs_mknod created object %d count = %d\n",
+		   obj->objectId, atomic_read(&inode->i_count)));
+		error = 0;
+	} else {
+		T(YAFFS_TRACE_OS,
+		  (KERN_DEBUG "yaffs_mknod failed making object\n"));
+		error = -ENOMEM;
+	}
+
+	return error;
+}
+
+static int yaffs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
+{
+	int retVal;
+	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_mkdir\n"));
+	retVal = yaffs_mknod(dir, dentry, mode | S_IFDIR, 0);
+#if 0
+	/* attempt to fix dir bug - didn't work */
+	if (!retVal) {
+		dget(dentry);
+	}
+#endif
+	return retVal;
+}
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode,
+			struct nameidata *n)
+#else
+static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode)
+#endif
+{
+	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_create\n"));
+	return yaffs_mknod(dir, dentry, mode | S_IFREG, 0);
+}
+
+static int yaffs_unlink(struct inode *dir, struct dentry *dentry)
+{
+	int retVal;
+
+	yaffs_Device *dev;
+
+	T(YAFFS_TRACE_OS,
+	  (KERN_DEBUG "yaffs_unlink %d:%s\n", (int)(dir->i_ino),
+	   dentry->d_name.name));
+
+	dev = yaffs_InodeToObject(dir)->myDev;
+
+	yaffs_GrossLock(dev);
+
+	retVal = yaffs_Unlink(yaffs_InodeToObject(dir), dentry->d_name.name);
+
+	if (retVal == YAFFS_OK) {
+		dentry->d_inode->i_nlink--;
+		dir->i_version++;
+		yaffs_GrossUnlock(dev);
+		mark_inode_dirty(dentry->d_inode);
+		return 0;
+	}
+	yaffs_GrossUnlock(dev);
+	return -ENOTEMPTY;
+}
+
+/*
+ * Create a link...
+ */
+static int yaffs_link(struct dentry *old_dentry, struct inode *dir,
+		      struct dentry *dentry)
+{
+	struct inode *inode = old_dentry->d_inode;
+	yaffs_Object *obj = NULL;
+	yaffs_Object *link = NULL;
+	yaffs_Device *dev;
+
+	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_link\n"));
+
+	obj = yaffs_InodeToObject(inode);
+	dev = obj->myDev;
+
+	yaffs_GrossLock(dev);
+
+	if (!S_ISDIR(inode->i_mode))	/* Don't link directories */
+	{
+		link =
+		    yaffs_Link(yaffs_InodeToObject(dir), dentry->d_name.name,
+			       obj);
+	}
+
+	if (link) {
+		old_dentry->d_inode->i_nlink = yaffs_GetObjectLinkCount(obj);
+		d_instantiate(dentry, old_dentry->d_inode);
+		atomic_inc(&old_dentry->d_inode->i_count);
+		T(YAFFS_TRACE_OS,
+		  (KERN_DEBUG "yaffs_link link count %d i_count %d\n",
+		   old_dentry->d_inode->i_nlink,
+		   atomic_read(&old_dentry->d_inode->i_count)));
+
+	}
+
+	yaffs_GrossUnlock(dev);
+
+	if (link) {
+
+		return 0;
+	}
+
+	return -EPERM;
+}
+
+static int yaffs_symlink(struct inode *dir, struct dentry *dentry,
+			 const char *symname)
+{
+	yaffs_Object *obj;
+	yaffs_Device *dev;
+	uid_t uid = current->fsuid;
+	gid_t gid = (dir->i_mode & S_ISGID) ? dir->i_gid : current->fsgid;
+
+	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_symlink\n"));
+
+	dev = yaffs_InodeToObject(dir)->myDev;
+	yaffs_GrossLock(dev);
+	obj = yaffs_MknodSymLink(yaffs_InodeToObject(dir), dentry->d_name.name,
+				 S_IFLNK | S_IRWXUGO, uid, gid, symname);
+	yaffs_GrossUnlock(dev);
+
+	if (obj) {
+
+		struct inode *inode;
+
+		inode = yaffs_get_inode(dir->i_sb, obj->yst_mode, 0, obj);
+		d_instantiate(dentry, inode);
+		T(YAFFS_TRACE_OS, (KERN_DEBUG "symlink created OK\n"));
+		return 0;
+	} else {
+		T(YAFFS_TRACE_OS, (KERN_DEBUG "symlink not created\n"));
+
+	}
+
+	return -ENOMEM;
+}
+
+static int yaffs_sync_object(struct file *file, struct dentry *dentry,
+			     int datasync)
+{
+
+	yaffs_Object *obj;
+	yaffs_Device *dev;
+
+	obj = yaffs_DentryToObject(dentry);
+
+	dev = obj->myDev;
+
+	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_sync_object\n"));
+	yaffs_GrossLock(dev);
+	yaffs_FlushFile(obj, 1);
+	yaffs_GrossUnlock(dev);
+	return 0;
+}
+
+/*
+ * The VFS layer already does all the dentry stuff for rename.
+ *
+ * NB: POSIX says you can rename an object over an old object of the same name
+ */
+static int yaffs_rename(struct inode *old_dir, struct dentry *old_dentry,
+			struct inode *new_dir, struct dentry *new_dentry)
+{
+	yaffs_Device *dev;
+	int retVal = YAFFS_FAIL;
+	yaffs_Object *target;
+
+        T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_rename\n"));
+	dev = yaffs_InodeToObject(old_dir)->myDev;
+
+	yaffs_GrossLock(dev);
+
+	/* Check if the target is an existing directory that is not empty. */
+	target =
+	    yaffs_FindObjectByName(yaffs_InodeToObject(new_dir),
+				   new_dentry->d_name.name);
+
+
+
+	if (target &&
+	    target->variantType == YAFFS_OBJECT_TYPE_DIRECTORY &&
+	    !list_empty(&target->variant.directoryVariant.children)) {
+
+	        T(YAFFS_TRACE_OS, (KERN_DEBUG "target is non-empty dir\n"));
+
+		retVal = YAFFS_FAIL;
+	} else {
+
+		/* Now does unlinking internally using shadowing mechanism */
+	        T(YAFFS_TRACE_OS, (KERN_DEBUG "calling yaffs_RenameObject\n"));
+
+		retVal =
+		    yaffs_RenameObject(yaffs_InodeToObject(old_dir),
+				       old_dentry->d_name.name,
+				       yaffs_InodeToObject(new_dir),
+				       new_dentry->d_name.name);
+
+	}
+	yaffs_GrossUnlock(dev);
+
+	if (retVal == YAFFS_OK) {
+		if(target) {
+			new_dentry->d_inode->i_nlink--;
+			mark_inode_dirty(new_dentry->d_inode);
+		}
+
+		return 0;
+	} else {
+		return -ENOTEMPTY;
+	}
+
+}
+
+static int yaffs_setattr(struct dentry *dentry, struct iattr *attr)
+{
+	struct inode *inode = dentry->d_inode;
+	int error;
+	yaffs_Device *dev;
+
+	T(YAFFS_TRACE_OS,
+	  (KERN_DEBUG "yaffs_setattr of object %d\n",
+	   yaffs_InodeToObject(inode)->objectId));
+
+	if ((error = inode_change_ok(inode, attr)) == 0) {
+
+		dev = yaffs_InodeToObject(inode)->myDev;
+		yaffs_GrossLock(dev);
+		if (yaffs_SetAttributes(yaffs_InodeToObject(inode), attr) ==
+		    YAFFS_OK) {
+			error = 0;
+		} else {
+			error = -EPERM;
+		}
+		yaffs_GrossUnlock(dev);
+		if (!error)
+			error = inode_setattr(inode, attr);
+	}
+	return error;
+}
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+static int yaffs_statfs(struct dentry *dentry, struct kstatfs *buf)
+{
+	yaffs_Device *dev = yaffs_DentryToObject(dentry)->myDev;
+	struct super_block *sb = dentry->d_sb;
+#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+static int yaffs_statfs(struct super_block *sb, struct kstatfs *buf)
+{
+	yaffs_Device *dev = yaffs_SuperToDevice(sb);
+#else
+static int yaffs_statfs(struct super_block *sb, struct statfs *buf)
+{
+	yaffs_Device *dev = yaffs_SuperToDevice(sb);
+#endif
+
+	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_statfs\n"));
+
+	yaffs_GrossLock(dev);
+
+	buf->f_type = YAFFS_MAGIC;
+	buf->f_bsize = sb->s_blocksize;
+	buf->f_namelen = 255;
+	if (sb->s_blocksize > dev->nDataBytesPerChunk) {
+
+		buf->f_blocks =
+		    (dev->endBlock - dev->startBlock +
+		     1) * dev->nChunksPerBlock / (sb->s_blocksize /
+						  dev->nDataBytesPerChunk);
+		buf->f_bfree =
+		    yaffs_GetNumberOfFreeChunks(dev) / (sb->s_blocksize /
+							dev->nDataBytesPerChunk);
+	} else {
+
+		buf->f_blocks =
+		    (dev->endBlock - dev->startBlock +
+		     1) * dev->nChunksPerBlock * (dev->nDataBytesPerChunk /
+						  sb->s_blocksize);
+		buf->f_bfree =
+		    yaffs_GetNumberOfFreeChunks(dev) * (dev->nDataBytesPerChunk /
+							sb->s_blocksize);
+	}
+	buf->f_files = 0;
+	buf->f_ffree = 0;
+	buf->f_bavail = buf->f_bfree;
+
+	yaffs_GrossUnlock(dev);
+	return 0;
+}
+
+
+/**
+static int yaffs_do_sync_fs(struct super_block *sb)
+{
+
+	yaffs_Device *dev = yaffs_SuperToDevice(sb);
+	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_do_sync_fs\n"));
+
+	if(sb->s_dirt) {
+		yaffs_GrossLock(dev);
+
+		if(dev)
+			yaffs_CheckpointSave(dev);
+
+		yaffs_GrossUnlock(dev);
+
+		sb->s_dirt = 0;
+	}
+	return 0;
+}
+**/
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+static void yaffs_write_super(struct super_block *sb)
+#else
+static int yaffs_write_super(struct super_block *sb)
+#endif
+{
+
+	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_write_super\n"));
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18))
+	return 0; /* yaffs_do_sync_fs(sb);*/
+#endif
+}
+
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+static int yaffs_sync_fs(struct super_block *sb, int wait)
+#else
+static int yaffs_sync_fs(struct super_block *sb)
+#endif
+{
+
+	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_sync_fs\n"));
+
+	return 0; /* yaffs_do_sync_fs(sb);*/
+
+}
+
+
+static void yaffs_read_inode(struct inode *inode)
+{
+	/* NB This is called as a side effect of other functions, but
+	 * we had to release the lock to prevent deadlocks, so
+	 * need to lock again.
+	 */
+
+	yaffs_Object *obj;
+	yaffs_Device *dev = yaffs_SuperToDevice(inode->i_sb);
+
+	T(YAFFS_TRACE_OS,
+	  (KERN_DEBUG "yaffs_read_inode for %d\n", (int)inode->i_ino));
+
+	yaffs_GrossLock(dev);
+
+	obj = yaffs_FindObjectByNumber(dev, inode->i_ino);
+
+	yaffs_FillInodeFromObject(inode, obj);
+
+	yaffs_GrossUnlock(dev);
+}
+
+static LIST_HEAD(yaffs_dev_list);
+
+#if 0 // not used
+static int yaffs_remount_fs(struct super_block *sb, int *flags, char *data)
+{
+	yaffs_Device    *dev = yaffs_SuperToDevice(sb);
+
+	if( *flags & MS_RDONLY ) {
+		struct mtd_info *mtd = yaffs_SuperToDevice(sb)->genericDevice;
+
+		T(YAFFS_TRACE_OS,
+			(KERN_DEBUG "yaffs_remount_fs: %s: RO\n", dev->name ));
+
+		yaffs_GrossLock(dev);
+
+		yaffs_FlushEntireDeviceCache(dev);
+
+		yaffs_CheckpointSave(dev);
+
+		if (mtd->sync)
+			mtd->sync(mtd);
+
+		yaffs_GrossUnlock(dev);
+	}
+	else {
+		T(YAFFS_TRACE_OS,
+			(KERN_DEBUG "yaffs_remount_fs: %s: RW\n", dev->name ));
+	}
+
+	return 0;
+}
+#endif
+
+static void yaffs_put_super(struct super_block *sb)
+{
+	yaffs_Device *dev = yaffs_SuperToDevice(sb);
+
+	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_put_super\n"));
+
+	yaffs_GrossLock(dev);
+
+	yaffs_FlushEntireDeviceCache(dev);
+
+	yaffs_CheckpointSave(dev);
+
+	if (dev->putSuperFunc) {
+		dev->putSuperFunc(sb);
+	}
+
+	yaffs_Deinitialise(dev);
+
+	yaffs_GrossUnlock(dev);
+
+	/* we assume this is protected by lock_kernel() in mount/umount */
+	list_del(&dev->devList);
+
+	if(dev->spareBuffer){
+		YFREE(dev->spareBuffer);
+		dev->spareBuffer = NULL;
+	}
+
+	kfree(dev);
+}
+
+
+static void yaffs_MTDPutSuper(struct super_block *sb)
+{
+
+	struct mtd_info *mtd = yaffs_SuperToDevice(sb)->genericDevice;
+
+	if (mtd->sync) {
+		mtd->sync(mtd);
+	}
+
+	put_mtd_device(mtd);
+}
+
+
+static void yaffs_MarkSuperBlockDirty(void *vsb)
+{
+	struct super_block *sb = (struct super_block *)vsb;
+
+	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_MarkSuperBlockDirty() sb = %p\n",sb));
+//	if(sb)
+//		sb->s_dirt = 1;
+}
+
+typedef struct {
+	int inband_tags;
+	int skip_checkpoint_read;
+	int skip_checkpoint_write;
+	int no_cache;
+} yaffs_options;
+
+#define MAX_OPT_LEN 20
+static int yaffs_parse_options(yaffs_options *options, const char *options_str)
+{
+	char cur_opt[MAX_OPT_LEN+1];
+	int p;
+	int error = 0;
+
+	/* Parse through the options which is a comma seperated list */
+
+	while(options_str && *options_str && !error){
+		memset(cur_opt,0,MAX_OPT_LEN+1);
+		p = 0;
+
+		while(*options_str && *options_str != ','){
+			if(p < MAX_OPT_LEN){
+				cur_opt[p] = *options_str;
+				p++;
+			}
+			options_str++;
+		}
+
+		if(!strcmp(cur_opt,"inband-tags"))
+			options->inband_tags = 1;
+		else if(!strcmp(cur_opt,"no-cache"))
+			options->no_cache = 1;
+		else if(!strcmp(cur_opt,"no-checkpoint-read"))
+			options->skip_checkpoint_read = 1;
+		else if(!strcmp(cur_opt,"no-checkpoint-write"))
+			options->skip_checkpoint_write = 1;
+		else if(!strcmp(cur_opt,"no-checkpoint")){
+			options->skip_checkpoint_read = 1;
+			options->skip_checkpoint_write = 1;
+		} else {
+			printk(KERN_INFO "yaffs: Bad mount option \"%s\"\n",cur_opt);
+			error = 1;
+		}
+
+	}
+
+	return error;
+}
+
+static struct super_block *yaffs_internal_read_super(int yaffsVersion,
+						     struct super_block *sb,
+						     void *data, int silent)
+{
+	int nBlocks;
+	struct inode *inode = NULL;
+	struct dentry *root;
+	yaffs_Device *dev = 0;
+	char devname_buf[BDEVNAME_SIZE + 1];
+	struct mtd_info *mtd;
+	int err;
+	char *data_str = (char *)data;
+
+	yaffs_options options;
+
+	sb->s_magic = YAFFS_MAGIC;
+	sb->s_op = &yaffs_super_ops;
+
+	if (!sb)
+		printk(KERN_INFO "yaffs: sb is NULL\n");
+	else if (!sb->s_dev)
+		printk(KERN_INFO "yaffs: sb->s_dev is NULL\n");
+	else if (!yaffs_devname(sb, devname_buf))
+		printk(KERN_INFO "yaffs: devname is NULL\n");
+	else
+		printk(KERN_INFO "yaffs: dev is %d name is \"%s\"\n",
+		       sb->s_dev,
+		       yaffs_devname(sb, devname_buf));
+
+	if(!data_str)
+		data_str = "";
+
+	printk(KERN_INFO "yaffs: passed flags \"%s\"\n",data_str);
+
+	memset(&options,0,sizeof(options));
+
+	if(yaffs_parse_options(&options,data_str)){
+		/* Option parsing failed */
+		return NULL;
+	}
+
+
+	sb->s_blocksize = PAGE_CACHE_SIZE;
+	sb->s_blocksize_bits = PAGE_CACHE_SHIFT;
+	T(YAFFS_TRACE_OS, ("yaffs_read_super: Using yaffs%d\n", yaffsVersion));
+	T(YAFFS_TRACE_OS,
+	  ("yaffs_read_super: block size %d\n", (int)(sb->s_blocksize)));
+
+#ifdef CONFIG_YAFFS_DISABLE_WRITE_VERIFY
+	T(YAFFS_TRACE_OS,
+	  ("yaffs: Write verification disabled. All guarantees "
+	   "null and void\n"));
+#endif
+
+	T(YAFFS_TRACE_ALWAYS, ("yaffs: Attempting MTD mount on %u.%u, "
+			       "\"%s\"\n",
+			       MAJOR(sb->s_dev), MINOR(sb->s_dev),
+			       yaffs_devname(sb, devname_buf)));
+
+	/* Check it's an mtd device..... */
+	if (MAJOR(sb->s_dev) != MTD_BLOCK_MAJOR) {
+		return NULL;	/* This isn't an mtd device */
+	}
+	/* Get the device */
+	mtd = get_mtd_device(NULL, MINOR(sb->s_dev));
+	if (!mtd) {
+		T(YAFFS_TRACE_ALWAYS,
+		  ("yaffs: MTD device #%u doesn't appear to exist\n",
+		   MINOR(sb->s_dev)));
+		return NULL;
+	}
+	/* Check it's NAND */
+	if (mtd->type != MTD_NANDFLASH) {
+		T(YAFFS_TRACE_ALWAYS,
+		  ("yaffs: MTD device is not NAND it's type %d\n", mtd->type));
+		return NULL;
+	}
+
+	T(YAFFS_TRACE_OS, (" erase %p\n", mtd->erase));
+	T(YAFFS_TRACE_OS, (" read %p\n", mtd->read));
+	T(YAFFS_TRACE_OS, (" write %p\n", mtd->write));
+	T(YAFFS_TRACE_OS, (" readoob %p\n", mtd->read_oob));
+	T(YAFFS_TRACE_OS, (" writeoob %p\n", mtd->write_oob));
+	T(YAFFS_TRACE_OS, (" block_isbad %p\n", mtd->block_isbad));
+	T(YAFFS_TRACE_OS, (" block_markbad %p\n", mtd->block_markbad));
+	T(YAFFS_TRACE_OS, (" %s %d\n", WRITE_SIZE_STR, WRITE_SIZE(mtd)));
+	T(YAFFS_TRACE_OS, (" oobsize %d\n", mtd->oobsize));
+	T(YAFFS_TRACE_OS, (" erasesize %d\n", mtd->erasesize));
+	T(YAFFS_TRACE_OS, (" size %d\n", mtd->size));
+
+#ifdef CONFIG_YAFFS_AUTO_YAFFS2
+
+	if (yaffsVersion == 1 &&
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+	    mtd->writesize >= 2048) {
+#else
+	    mtd->oobblock >= 2048) {
+#endif
+	    T(YAFFS_TRACE_ALWAYS,("yaffs: auto selecting yaffs2\n"));
+	    yaffsVersion = 2;
+	}
+
+	/* Added NCB 26/5/2006 for completeness */
+	if (yaffsVersion == 2 &&
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+	    mtd->writesize == 512) {
+#else
+	    mtd->oobblock == 512) {
+#endif
+	    T(YAFFS_TRACE_ALWAYS,("yaffs: auto selecting yaffs1\n"));
+	    yaffsVersion = 1;
+	}
+
+#endif
+
+	if (yaffsVersion == 2) {
+		/* Check for version 2 style functions */
+		if (!mtd->erase ||
+		    !mtd->block_isbad ||
+		    !mtd->block_markbad ||
+		    !mtd->read ||
+		    !mtd->write ||
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+		    !mtd->read_oob || !mtd->write_oob) {
+#else
+		    !mtd->write_ecc ||
+		    !mtd->read_ecc || !mtd->read_oob || !mtd->write_oob) {
+#endif
+			T(YAFFS_TRACE_ALWAYS,
+			  ("yaffs: MTD device does not support required "
+			   "functions\n"));;
+			return NULL;
+		}
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+		if (mtd->writesize < YAFFS_MIN_YAFFS2_CHUNK_SIZE ||
+#else
+		if (mtd->oobblock < YAFFS_MIN_YAFFS2_CHUNK_SIZE ||
+#endif
+		    mtd->oobsize < YAFFS_MIN_YAFFS2_SPARE_SIZE) {
+			T(YAFFS_TRACE_ALWAYS,
+			  ("yaffs: MTD device does not have the "
+			   "right page sizes\n"));
+			return NULL;
+		}
+	} else {
+		/* Check for V1 style functions */
+		if (!mtd->erase ||
+		    !mtd->read ||
+		    !mtd->write ||
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+		    !mtd->read_oob || !mtd->write_oob) {
+#else
+		    !mtd->write_ecc ||
+		    !mtd->read_ecc || !mtd->read_oob || !mtd->write_oob) {
+#endif
+			T(YAFFS_TRACE_ALWAYS,
+			  ("yaffs: MTD device does not support required "
+			   "functions\n"));;
+			return NULL;
+		}
+
+		if (WRITE_SIZE(mtd) < YAFFS_BYTES_PER_CHUNK ||
+		    mtd->oobsize != YAFFS_BYTES_PER_SPARE) {
+			T(YAFFS_TRACE_ALWAYS,
+			  ("yaffs: MTD device does not support have the "
+			   "right page sizes\n"));
+			return NULL;
+		}
+	}
+
+	/* OK, so if we got here, we have an MTD that's NAND and looks
+	 * like it has the right capabilities
+	 * Set the yaffs_Device up for mtd
+	 */
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+	sb->s_fs_info = dev = kmalloc(sizeof(yaffs_Device), GFP_KERNEL);
+#else
+	sb->u.generic_sbp = dev = kmalloc(sizeof(yaffs_Device), GFP_KERNEL);
+#endif
+	if (!dev) {
+		/* Deep shit could not allocate device structure */
+		T(YAFFS_TRACE_ALWAYS,
+		  ("yaffs_read_super: Failed trying to allocate "
+		   "yaffs_Device. \n"));
+		return NULL;
+	}
+
+	memset(dev, 0, sizeof(yaffs_Device));
+	dev->genericDevice = mtd;
+	dev->name = mtd->name;
+
+	/* Set up the memory size parameters.... */
+
+	nBlocks = mtd->size / (YAFFS_CHUNKS_PER_BLOCK * YAFFS_BYTES_PER_CHUNK);
+	dev->startBlock = 0;
+	dev->endBlock = nBlocks - 1;
+	dev->nChunksPerBlock = YAFFS_CHUNKS_PER_BLOCK;
+	dev->nDataBytesPerChunk = YAFFS_BYTES_PER_CHUNK;
+	dev->nReservedBlocks = 5;
+	dev->nShortOpCaches = (options.no_cache) ? 0 : 10;
+
+	/* ... and the functions. */
+	if (yaffsVersion == 2) {
+		dev->writeChunkWithTagsToNAND =
+		    nandmtd2_WriteChunkWithTagsToNAND;
+		dev->readChunkWithTagsFromNAND =
+		    nandmtd2_ReadChunkWithTagsFromNAND;
+		dev->markNANDBlockBad = nandmtd2_MarkNANDBlockBad;
+		dev->queryNANDBlock = nandmtd2_QueryNANDBlock;
+		dev->spareBuffer = YMALLOC(mtd->oobsize);
+		dev->isYaffs2 = 1;
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+		dev->nDataBytesPerChunk = mtd->writesize;
+		dev->nChunksPerBlock = mtd->erasesize / mtd->writesize;
+#else
+		dev->nDataBytesPerChunk = mtd->oobblock;
+		dev->nChunksPerBlock = mtd->erasesize / mtd->oobblock;
+#endif
+		nBlocks = mtd->size / mtd->erasesize;
+
+		dev->nCheckpointReservedBlocks = CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS;
+		dev->startBlock = 0;
+		dev->endBlock = nBlocks - 1;
+	} else {
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+		/* use the MTD interface in yaffs_mtdif1.c */
+		dev->writeChunkWithTagsToNAND =
+			nandmtd1_WriteChunkWithTagsToNAND;
+		dev->readChunkWithTagsFromNAND =
+			nandmtd1_ReadChunkWithTagsFromNAND;
+		dev->markNANDBlockBad = nandmtd1_MarkNANDBlockBad;
+		dev->queryNANDBlock = nandmtd1_QueryNANDBlock;
+#else
+		dev->writeChunkToNAND = nandmtd_WriteChunkToNAND;
+		dev->readChunkFromNAND = nandmtd_ReadChunkFromNAND;
+#endif
+		dev->isYaffs2 = 0;
+	}
+	/* ... and common functions */
+	dev->eraseBlockInNAND = nandmtd_EraseBlockInNAND;
+	dev->initialiseNAND = nandmtd_InitialiseNAND;
+
+	dev->putSuperFunc = yaffs_MTDPutSuper;
+
+	dev->superBlock = (void *)sb;
+	dev->markSuperBlockDirty = yaffs_MarkSuperBlockDirty;
+
+
+#ifndef CONFIG_YAFFS_DOES_ECC
+	dev->useNANDECC = 1;
+#endif
+
+#ifdef CONFIG_YAFFS_DISABLE_WIDE_TNODES
+	dev->wideTnodesDisabled = 1;
+#endif
+
+	dev->skipCheckpointRead = options.skip_checkpoint_read;
+	dev->skipCheckpointWrite = options.skip_checkpoint_write;
+
+	/* we assume this is protected by lock_kernel() in mount/umount */
+	list_add_tail(&dev->devList, &yaffs_dev_list);
+
+	init_MUTEX(&dev->grossLock);
+
+	yaffs_GrossLock(dev);
+
+	err = yaffs_GutsInitialise(dev);
+
+	T(YAFFS_TRACE_OS,
+	  ("yaffs_read_super: guts initialised %s\n",
+	   (err == YAFFS_OK) ? "OK" : "FAILED"));
+
+	/* Release lock before yaffs_get_inode() */
+	yaffs_GrossUnlock(dev);
+
+	/* Create root inode */
+	if (err == YAFFS_OK)
+		inode = yaffs_get_inode(sb, S_IFDIR | 0755, 0,
+					yaffs_Root(dev));
+
+	if (!inode)
+		return NULL;
+
+	inode->i_op = &yaffs_dir_inode_operations;
+	inode->i_fop = &yaffs_dir_operations;
+
+	T(YAFFS_TRACE_OS, ("yaffs_read_super: got root inode\n"));
+
+	root = d_alloc_root(inode);
+
+	T(YAFFS_TRACE_OS, ("yaffs_read_super: d_alloc_root done\n"));
+
+	if (!root) {
+		iput(inode);
+		return NULL;
+	}
+	sb->s_root = root;
+
+	T(YAFFS_TRACE_OS, ("yaffs_read_super: done\n"));
+	return sb;
+}
+
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+static int yaffs_internal_read_super_mtd(struct super_block *sb, void *data,
+					 int silent)
+{
+	return yaffs_internal_read_super(1, sb, data, silent) ? 0 : -EINVAL;
+}
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+static int yaffs_read_super(struct file_system_type *fs,
+			    int flags, const char *dev_name,
+			    void *data, struct vfsmount *mnt)
+{
+
+	return get_sb_bdev(fs, flags, dev_name, data,
+			   yaffs_internal_read_super_mtd, mnt);
+}
+#else
+static struct super_block *yaffs_read_super(struct file_system_type *fs,
+					    int flags, const char *dev_name,
+					    void *data)
+{
+
+	return get_sb_bdev(fs, flags, dev_name, data,
+			   yaffs_internal_read_super_mtd);
+}
+#endif
+
+static struct file_system_type yaffs_fs_type = {
+	.owner = THIS_MODULE,
+	.name = "yaffs",
+	.get_sb = yaffs_read_super,
+	.kill_sb = kill_block_super,
+	.fs_flags = FS_REQUIRES_DEV,
+};
+#else
+static struct super_block *yaffs_read_super(struct super_block *sb, void *data,
+					    int silent)
+{
+	return yaffs_internal_read_super(1, sb, data, silent);
+}
+
+static DECLARE_FSTYPE(yaffs_fs_type, "yaffs", yaffs_read_super,
+		      FS_REQUIRES_DEV);
+#endif
+
+
+#ifdef CONFIG_YAFFS_YAFFS2
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+static int yaffs2_internal_read_super_mtd(struct super_block *sb, void *data,
+					  int silent)
+{
+	return yaffs_internal_read_super(2, sb, data, silent) ? 0 : -EINVAL;
+}
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+static int yaffs2_read_super(struct file_system_type *fs,
+			int flags, const char *dev_name, void *data,
+			struct vfsmount *mnt)
+{
+	return get_sb_bdev(fs, flags, dev_name, data,
+			yaffs2_internal_read_super_mtd, mnt);
+}
+#else
+static struct super_block *yaffs2_read_super(struct file_system_type *fs,
+					     int flags, const char *dev_name,
+					     void *data)
+{
+
+	return get_sb_bdev(fs, flags, dev_name, data,
+			   yaffs2_internal_read_super_mtd);
+}
+#endif
+
+static struct file_system_type yaffs2_fs_type = {
+	.owner = THIS_MODULE,
+	.name = "yaffs2",
+	.get_sb = yaffs2_read_super,
+	.kill_sb = kill_block_super,
+	.fs_flags = FS_REQUIRES_DEV,
+};
+#else
+static struct super_block *yaffs2_read_super(struct super_block *sb,
+					     void *data, int silent)
+{
+	return yaffs_internal_read_super(2, sb, data, silent);
+}
+
+static DECLARE_FSTYPE(yaffs2_fs_type, "yaffs2", yaffs2_read_super,
+		      FS_REQUIRES_DEV);
+#endif
+
+#endif				/* CONFIG_YAFFS_YAFFS2 */
+
+static struct proc_dir_entry *my_proc_entry;
+
+static char *yaffs_dump_dev(char *buf, yaffs_Device * dev)
+{
+	buf += sprintf(buf, "startBlock......... %d\n", dev->startBlock);
+	buf += sprintf(buf, "endBlock........... %d\n", dev->endBlock);
+	buf += sprintf(buf, "nDataBytesPerChunk. %d\n", dev->nDataBytesPerChunk);
+	buf += sprintf(buf, "chunkGroupBits..... %d\n", dev->chunkGroupBits);
+	buf += sprintf(buf, "chunkGroupSize..... %d\n", dev->chunkGroupSize);
+	buf += sprintf(buf, "nErasedBlocks...... %d\n", dev->nErasedBlocks);
+	buf += sprintf(buf, "nReservedBlocks.... %d\n", dev->nReservedBlocks);
+	buf += sprintf(buf, "nCheckptResBlocks.. %d\n", dev->nCheckpointReservedBlocks);
+	buf += sprintf(buf, "blocksInCheckpoint. %d\n", dev->blocksInCheckpoint);
+	buf += sprintf(buf, "nTnodesCreated..... %d\n", dev->nTnodesCreated);
+	buf += sprintf(buf, "nFreeTnodes........ %d\n", dev->nFreeTnodes);
+	buf += sprintf(buf, "nObjectsCreated.... %d\n", dev->nObjectsCreated);
+	buf += sprintf(buf, "nFreeObjects....... %d\n", dev->nFreeObjects);
+	buf += sprintf(buf, "nFreeChunks........ %d\n", dev->nFreeChunks);
+	buf += sprintf(buf, "nPageWrites........ %d\n", dev->nPageWrites);
+	buf += sprintf(buf, "nPageReads......... %d\n", dev->nPageReads);
+	buf += sprintf(buf, "nBlockErasures..... %d\n", dev->nBlockErasures);
+	buf += sprintf(buf, "nGCCopies.......... %d\n", dev->nGCCopies);
+	buf +=
+	    sprintf(buf, "garbageCollections. %d\n", dev->garbageCollections);
+	buf +=
+	    sprintf(buf, "passiveGCs......... %d\n",
+		    dev->passiveGarbageCollections);
+	buf += sprintf(buf, "nRetriedWrites..... %d\n", dev->nRetriedWrites);
+	buf += sprintf(buf, "nShortOpCaches..... %d\n", dev->nShortOpCaches);
+	buf += sprintf(buf, "nRetireBlocks...... %d\n", dev->nRetiredBlocks);
+	buf += sprintf(buf, "eccFixed........... %d\n", dev->eccFixed);
+	buf += sprintf(buf, "eccUnfixed......... %d\n", dev->eccUnfixed);
+	buf += sprintf(buf, "tagsEccFixed....... %d\n", dev->tagsEccFixed);
+	buf += sprintf(buf, "tagsEccUnfixed..... %d\n", dev->tagsEccUnfixed);
+	buf += sprintf(buf, "cacheHits.......... %d\n", dev->cacheHits);
+	buf += sprintf(buf, "nDeletedFiles...... %d\n", dev->nDeletedFiles);
+	buf += sprintf(buf, "nUnlinkedFiles..... %d\n", dev->nUnlinkedFiles);
+	buf +=
+	    sprintf(buf, "nBackgroudDeletions %d\n", dev->nBackgroundDeletions);
+	buf += sprintf(buf, "useNANDECC......... %d\n", dev->useNANDECC);
+	buf += sprintf(buf, "isYaffs2........... %d\n", dev->isYaffs2);
+
+	return buf;
+}
+
+static int yaffs_proc_read(char *page,
+			   char **start,
+			   off_t offset, int count, int *eof, void *data)
+{
+	struct list_head *item;
+	char *buf = page;
+	int step = offset;
+	int n = 0;
+
+	/* Get proc_file_read() to step 'offset' by one on each sucessive call.
+	 * We use 'offset' (*ppos) to indicate where we are in devList.
+	 * This also assumes the user has posted a read buffer large
+	 * enough to hold the complete output; but that's life in /proc.
+	 */
+
+	*(int *)start = 1;
+
+	/* Print header first */
+	if (step == 0) {
+		buf += sprintf(buf, "YAFFS built:" __DATE__ " " __TIME__
+			       "\n%s\n%s\n", yaffs_fs_c_version,
+			       yaffs_guts_c_version);
+	}
+
+	/* hold lock_kernel while traversing yaffs_dev_list */
+	lock_kernel();
+
+	/* Locate and print the Nth entry.  Order N-squared but N is small. */
+	list_for_each(item, &yaffs_dev_list) {
+		yaffs_Device *dev = list_entry(item, yaffs_Device, devList);
+		if (n < step) {
+			n++;
+			continue;
+		}
+		buf += sprintf(buf, "\nDevice %d \"%s\"\n", n, dev->name);
+		buf = yaffs_dump_dev(buf, dev);
+		break;
+	}
+	unlock_kernel();
+
+	return buf - page < count ? buf - page : count;
+}
+
+/**
+ * Set the verbosity of the warnings and error messages.
+ *
+ * Note that the names can only be a..z or _ with the current code.
+ */
+
+static struct {
+	char *mask_name;
+	unsigned mask_bitfield;
+} mask_flags[] = {
+	{"allocate", YAFFS_TRACE_ALLOCATE},
+	{"always", YAFFS_TRACE_ALWAYS},
+	{"bad_blocks", YAFFS_TRACE_BAD_BLOCKS},
+	{"buffers", YAFFS_TRACE_BUFFERS},
+	{"bug", YAFFS_TRACE_BUG},
+	{"checkpt", YAFFS_TRACE_CHECKPOINT},
+	{"deletion", YAFFS_TRACE_DELETION},
+	{"erase", YAFFS_TRACE_ERASE},
+	{"error", YAFFS_TRACE_ERROR},
+	{"gc_detail", YAFFS_TRACE_GC_DETAIL},
+	{"gc", YAFFS_TRACE_GC},
+	{"mtd", YAFFS_TRACE_MTD},
+	{"nandaccess", YAFFS_TRACE_NANDACCESS},
+	{"os", YAFFS_TRACE_OS},
+	{"scan_debug", YAFFS_TRACE_SCAN_DEBUG},
+	{"scan", YAFFS_TRACE_SCAN},
+	{"tracing", YAFFS_TRACE_TRACING},
+
+	{"verify", YAFFS_TRACE_VERIFY},
+	{"verify_nand", YAFFS_TRACE_VERIFY_NAND},
+	{"verify_full", YAFFS_TRACE_VERIFY_FULL},
+	{"verify_all", YAFFS_TRACE_VERIFY_ALL},
+
+	{"write", YAFFS_TRACE_WRITE},
+	{"all", 0xffffffff},
+	{"none", 0},
+	{NULL, 0},
+};
+
+#define MAX_MASK_NAME_LENGTH 40
+static int yaffs_proc_write(struct file *file, const char *buf,
+					 unsigned long count, void *data)
+{
+	unsigned rg = 0, mask_bitfield;
+	char *end;
+	char *mask_name;
+	const char *x;
+	char substring[MAX_MASK_NAME_LENGTH+1];
+	int i;
+	int done = 0;
+	int add, len = 0;
+	int pos = 0;
+
+	rg = yaffs_traceMask;
+
+	while (!done && (pos < count)) {
+		done = 1;
+		while ((pos < count) && isspace(buf[pos])) {
+			pos++;
+		}
+
+		switch (buf[pos]) {
+		case '+':
+		case '-':
+		case '=':
+			add = buf[pos];
+			pos++;
+			break;
+
+		default:
+			add = ' ';
+			break;
+		}
+		mask_name = NULL;
+
+		mask_bitfield = simple_strtoul(buf + pos, &end, 0);
+		if (end > buf + pos) {
+			mask_name = "numeral";
+			len = end - (buf + pos);
+			pos += len;
+			done = 0;
+		} else {
+			for(x = buf + pos, i = 0;
+			    (*x == '_' || (*x >='a' && *x <= 'z')) &&
+			    i <MAX_MASK_NAME_LENGTH; x++, i++, pos++)
+			    substring[i] = *x;
+			substring[i] = '\0';
+
+			for (i = 0; mask_flags[i].mask_name != NULL; i++) {
+				if(strcmp(substring,mask_flags[i].mask_name) == 0){
+					mask_name = mask_flags[i].mask_name;
+					mask_bitfield = mask_flags[i].mask_bitfield;
+					done = 0;
+					break;
+				}
+			}
+		}
+
+		if (mask_name != NULL) {
+			done = 0;
+			switch(add) {
+			case '-':
+				rg &= ~mask_bitfield;
+				break;
+			case '+':
+				rg |= mask_bitfield;
+				break;
+			case '=':
+				rg = mask_bitfield;
+				break;
+			default:
+				rg |= mask_bitfield;
+				break;
+			}
+		}
+	}
+
+	yaffs_traceMask = rg | YAFFS_TRACE_ALWAYS;
+
+	printk("new trace = 0x%08X\n",yaffs_traceMask);
+
+	if (rg & YAFFS_TRACE_ALWAYS) {
+		for (i = 0; mask_flags[i].mask_name != NULL; i++) {
+			char flag;
+			flag = ((rg & mask_flags[i].mask_bitfield) == mask_flags[i].mask_bitfield) ? '+' : '-';
+			printk("%c%s\n", flag, mask_flags[i].mask_name);
+		}
+	}
+
+	return count;
+}
+
+/* Stuff to handle installation of file systems */
+struct file_system_to_install {
+	struct file_system_type *fst;
+	int installed;
+};
+
+static struct file_system_to_install fs_to_install[] = {
+//#ifdef CONFIG_YAFFS_YAFFS1
+	{&yaffs_fs_type, 0},
+//#endif
+//#ifdef CONFIG_YAFFS_YAFFS2
+	{&yaffs2_fs_type, 0},
+//#endif
+	{NULL, 0}
+};
+
+static int __init init_yaffs_fs(void)
+{
+	int error = 0;
+	struct file_system_to_install *fsinst;
+
+	T(YAFFS_TRACE_ALWAYS,
+	  ("yaffs " __DATE__ " " __TIME__ " Installing. \n"));
+
+	/* Install the proc_fs entry */
+	my_proc_entry = create_proc_entry("yaffs",
+					       S_IRUGO | S_IFREG,
+					       &proc_root);
+
+	if (my_proc_entry) {
+		my_proc_entry->write_proc = yaffs_proc_write;
+		my_proc_entry->read_proc = yaffs_proc_read;
+		my_proc_entry->data = NULL;
+	} else {
+		return -ENOMEM;
+	}
+
+	/* Now add the file system entries */
+
+	fsinst = fs_to_install;
+
+	while (fsinst->fst && !error) {
+		error = register_filesystem(fsinst->fst);
+		if (!error) {
+			fsinst->installed = 1;
+		}
+		fsinst++;
+	}
+
+	/* Any errors? uninstall  */
+	if (error) {
+		fsinst = fs_to_install;
+
+		while (fsinst->fst) {
+			if (fsinst->installed) {
+				unregister_filesystem(fsinst->fst);
+				fsinst->installed = 0;
+			}
+			fsinst++;
+		}
+	}
+
+	return error;
+}
+
+static void __exit exit_yaffs_fs(void)
+{
+
+	struct file_system_to_install *fsinst;
+
+	T(YAFFS_TRACE_ALWAYS, ("yaffs " __DATE__ " " __TIME__
+			       " removing. \n"));
+
+	remove_proc_entry("yaffs", &proc_root);
+
+	fsinst = fs_to_install;
+
+	while (fsinst->fst) {
+		if (fsinst->installed) {
+			unregister_filesystem(fsinst->fst);
+			fsinst->installed = 0;
+		}
+		fsinst++;
+	}
+
+}
+
+module_init(init_yaffs_fs)
+module_exit(exit_yaffs_fs)
+
+MODULE_DESCRIPTION("YAFFS2 - a NAND specific flash file system");
+MODULE_AUTHOR("Charles Manning, Aleph One Ltd., 2002-2006");
+MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/files/fs/yaffs2/yaffs_guts.c b/target/linux/generic/files/fs/yaffs2/yaffs_guts.c
new file mode 100644
index 0000000000..2ab8146913
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/yaffs_guts.c
@@ -0,0 +1,7469 @@
+/*
+ * YAFFS: Yet Another Flash File System. A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ *   for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+const char *yaffs_guts_c_version =
+    "$Id: yaffs_guts.c,v 1.49 2007-05-15 20:07:40 charles Exp $";
+
+#include "yportenv.h"
+
+#include "yaffsinterface.h"
+#include "yaffs_guts.h"
+#include "yaffs_tagsvalidity.h"
+
+#include "yaffs_tagscompat.h"
+#ifndef  CONFIG_YAFFS_USE_OWN_SORT
+#include "yaffs_qsort.h"
+#endif
+#include "yaffs_nand.h"
+
+#include "yaffs_checkptrw.h"
+
+#include "yaffs_nand.h"
+#include "yaffs_packedtags2.h"
+
+
+#ifdef CONFIG_YAFFS_WINCE
+void yfsd_LockYAFFS(BOOL fsLockOnly);
+void yfsd_UnlockYAFFS(BOOL fsLockOnly);
+#endif
+
+#define YAFFS_PASSIVE_GC_CHUNKS 2
+
+#include "yaffs_ecc.h"
+
+
+/* Robustification (if it ever comes about...) */
+static void yaffs_RetireBlock(yaffs_Device * dev, int blockInNAND);
+static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND, int erasedOk);
+static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+				     const __u8 * data,
+				     const yaffs_ExtendedTags * tags);
+static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+				    const yaffs_ExtendedTags * tags);
+
+/* Other local prototypes */
+static int yaffs_UnlinkObject( yaffs_Object *obj);
+static int yaffs_ObjectHasCachedWriteData(yaffs_Object *obj);
+
+static void yaffs_HardlinkFixup(yaffs_Device *dev, yaffs_Object *hardList);
+
+static int yaffs_WriteNewChunkWithTagsToNAND(yaffs_Device * dev,
+					     const __u8 * buffer,
+					     yaffs_ExtendedTags * tags,
+					     int useReserve);
+static int yaffs_PutChunkIntoFile(yaffs_Object * in, int chunkInInode,
+				  int chunkInNAND, int inScan);
+
+static yaffs_Object *yaffs_CreateNewObject(yaffs_Device * dev, int number,
+					   yaffs_ObjectType type);
+static void yaffs_AddObjectToDirectory(yaffs_Object * directory,
+				       yaffs_Object * obj);
+static int yaffs_UpdateObjectHeader(yaffs_Object * in, const YCHAR * name,
+				    int force, int isShrink, int shadows);
+static void yaffs_RemoveObjectFromDirectory(yaffs_Object * obj);
+static int yaffs_CheckStructures(void);
+static int yaffs_DeleteWorker(yaffs_Object * in, yaffs_Tnode * tn, __u32 level,
+			      int chunkOffset, int *limit);
+static int yaffs_DoGenericObjectDeletion(yaffs_Object * in);
+
+static yaffs_BlockInfo *yaffs_GetBlockInfo(yaffs_Device * dev, int blockNo);
+
+static __u8 *yaffs_GetTempBuffer(yaffs_Device * dev, int lineNo);
+static void yaffs_ReleaseTempBuffer(yaffs_Device * dev, __u8 * buffer,
+				    int lineNo);
+
+static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev,
+				  int chunkInNAND);
+
+static int yaffs_UnlinkWorker(yaffs_Object * obj);
+static void yaffs_DestroyObject(yaffs_Object * obj);
+
+static int yaffs_TagsMatch(const yaffs_ExtendedTags * tags, int objectId,
+			   int chunkInObject);
+
+loff_t yaffs_GetFileSize(yaffs_Object * obj);
+
+static int yaffs_AllocateChunk(yaffs_Device * dev, int useReserve, yaffs_BlockInfo **blockUsedPtr);
+
+static void yaffs_VerifyFreeChunks(yaffs_Device * dev);
+
+static void yaffs_CheckObjectDetailsLoaded(yaffs_Object *in);
+
+#ifdef YAFFS_PARANOID
+static int yaffs_CheckFileSanity(yaffs_Object * in);
+#else
+#define yaffs_CheckFileSanity(in)
+#endif
+
+static void yaffs_InvalidateWholeChunkCache(yaffs_Object * in);
+static void yaffs_InvalidateChunkCache(yaffs_Object * object, int chunkId);
+
+static void yaffs_InvalidateCheckpoint(yaffs_Device *dev);
+
+static int yaffs_FindChunkInFile(yaffs_Object * in, int chunkInInode,
+				 yaffs_ExtendedTags * tags);
+
+static __u32 yaffs_GetChunkGroupBase(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos);
+static yaffs_Tnode *yaffs_FindLevel0Tnode(yaffs_Device * dev,
+					  yaffs_FileStructure * fStruct,
+					  __u32 chunkId);
+
+
+/* Function to calculate chunk and offset */
+
+static void yaffs_AddrToChunk(yaffs_Device *dev, loff_t addr, __u32 *chunk, __u32 *offset)
+{
+	if(dev->chunkShift){
+		/* Easy-peasy power of 2 case */
+		*chunk  = (__u32)(addr >> dev->chunkShift);
+		*offset = (__u32)(addr & dev->chunkMask);
+	}
+	else if(dev->crumbsPerChunk)
+	{
+		/* Case where we're using "crumbs" */
+		*offset = (__u32)(addr & dev->crumbMask);
+		addr >>= dev->crumbShift;
+		*chunk = ((__u32)addr)/dev->crumbsPerChunk;
+		*offset += ((addr - (*chunk * dev->crumbsPerChunk)) << dev->crumbShift);
+	}
+	else
+		YBUG();
+}
+
+/* Function to return the number of shifts for a power of 2 greater than or equal
+ * to the given number
+ * Note we don't try to cater for all possible numbers and this does not have to
+ * be hellishly efficient.
+ */
+
+static __u32 ShiftsGE(__u32 x)
+{
+	int extraBits;
+	int nShifts;
+
+	nShifts = extraBits = 0;
+
+	while(x>1){
+		if(x & 1) extraBits++;
+		x>>=1;
+		nShifts++;
+	}
+
+	if(extraBits)
+		nShifts++;
+
+	return nShifts;
+}
+
+/* Function to return the number of shifts to get a 1 in bit 0
+ */
+
+static __u32 ShiftDiv(__u32 x)
+{
+	int nShifts;
+
+	nShifts =  0;
+
+	if(!x) return 0;
+
+	while( !(x&1)){
+		x>>=1;
+		nShifts++;
+	}
+
+	return nShifts;
+}
+
+
+
+/*
+ * Temporary buffer manipulations.
+ */
+
+static int yaffs_InitialiseTempBuffers(yaffs_Device *dev)
+{
+	int i;
+	__u8 *buf = (__u8 *)1;
+
+	memset(dev->tempBuffer,0,sizeof(dev->tempBuffer));
+
+	for (i = 0; buf && i < YAFFS_N_TEMP_BUFFERS; i++) {
+		dev->tempBuffer[i].line = 0;	/* not in use */
+		dev->tempBuffer[i].buffer = buf =
+		    YMALLOC_DMA(dev->nDataBytesPerChunk);
+	}
+
+	return buf ? YAFFS_OK : YAFFS_FAIL;
+
+}
+
+static __u8 *yaffs_GetTempBuffer(yaffs_Device * dev, int lineNo)
+{
+	int i, j;
+	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
+		if (dev->tempBuffer[i].line == 0) {
+			dev->tempBuffer[i].line = lineNo;
+			if ((i + 1) > dev->maxTemp) {
+				dev->maxTemp = i + 1;
+				for (j = 0; j <= i; j++)
+					dev->tempBuffer[j].maxLine =
+					    dev->tempBuffer[j].line;
+			}
+
+			return dev->tempBuffer[i].buffer;
+		}
+	}
+
+	T(YAFFS_TRACE_BUFFERS,
+	  (TSTR("Out of temp buffers at line %d, other held by lines:"),
+	   lineNo));
+	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
+		T(YAFFS_TRACE_BUFFERS, (TSTR(" %d "), dev->tempBuffer[i].line));
+	}
+	T(YAFFS_TRACE_BUFFERS, (TSTR(" " TENDSTR)));
+
+	/*
+	 * If we got here then we have to allocate an unmanaged one
+	 * This is not good.
+	 */
+
+	dev->unmanagedTempAllocations++;
+	return YMALLOC(dev->nDataBytesPerChunk);
+
+}
+
+static void yaffs_ReleaseTempBuffer(yaffs_Device * dev, __u8 * buffer,
+				    int lineNo)
+{
+	int i;
+	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
+		if (dev->tempBuffer[i].buffer == buffer) {
+			dev->tempBuffer[i].line = 0;
+			return;
+		}
+	}
+
+	if (buffer) {
+		/* assume it is an unmanaged one. */
+		T(YAFFS_TRACE_BUFFERS,
+		  (TSTR("Releasing unmanaged temp buffer in line %d" TENDSTR),
+		   lineNo));
+		YFREE(buffer);
+		dev->unmanagedTempDeallocations++;
+	}
+
+}
+
+/*
+ * Determine if we have a managed buffer.
+ */
+int yaffs_IsManagedTempBuffer(yaffs_Device * dev, const __u8 * buffer)
+{
+	int i;
+	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
+		if (dev->tempBuffer[i].buffer == buffer)
+			return 1;
+
+	}
+
+    for (i = 0; i < dev->nShortOpCaches; i++) {
+        if( dev->srCache[i].data == buffer )
+            return 1;
+
+    }
+
+    if (buffer == dev->checkpointBuffer)
+      return 1;
+
+    T(YAFFS_TRACE_ALWAYS,
+	  (TSTR("yaffs: unmaged buffer detected.\n" TENDSTR)));
+    return 0;
+}
+
+
+
+/*
+ * Chunk bitmap manipulations
+ */
+
+static Y_INLINE __u8 *yaffs_BlockBits(yaffs_Device * dev, int blk)
+{
+	if (blk < dev->internalStartBlock || blk > dev->internalEndBlock) {
+		T(YAFFS_TRACE_ERROR,
+		  (TSTR("**>> yaffs: BlockBits block %d is not valid" TENDSTR),
+		   blk));
+		YBUG();
+	}
+	return dev->chunkBits +
+	    (dev->chunkBitmapStride * (blk - dev->internalStartBlock));
+}
+
+static Y_INLINE void yaffs_VerifyChunkBitId(yaffs_Device *dev, int blk, int chunk)
+{
+	if(blk < dev->internalStartBlock || blk > dev->internalEndBlock ||
+	   chunk < 0 || chunk >= dev->nChunksPerBlock) {
+	   T(YAFFS_TRACE_ERROR,
+	    (TSTR("**>> yaffs: Chunk Id (%d:%d) invalid"TENDSTR),blk,chunk));
+	    YBUG();
+	}
+}
+
+static Y_INLINE void yaffs_ClearChunkBits(yaffs_Device * dev, int blk)
+{
+	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+
+	memset(blkBits, 0, dev->chunkBitmapStride);
+}
+
+static Y_INLINE void yaffs_ClearChunkBit(yaffs_Device * dev, int blk, int chunk)
+{
+	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+
+	yaffs_VerifyChunkBitId(dev,blk,chunk);
+
+	blkBits[chunk / 8] &= ~(1 << (chunk & 7));
+}
+
+static Y_INLINE void yaffs_SetChunkBit(yaffs_Device * dev, int blk, int chunk)
+{
+	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+
+	yaffs_VerifyChunkBitId(dev,blk,chunk);
+
+	blkBits[chunk / 8] |= (1 << (chunk & 7));
+}
+
+static Y_INLINE int yaffs_CheckChunkBit(yaffs_Device * dev, int blk, int chunk)
+{
+	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+	yaffs_VerifyChunkBitId(dev,blk,chunk);
+
+	return (blkBits[chunk / 8] & (1 << (chunk & 7))) ? 1 : 0;
+}
+
+static Y_INLINE int yaffs_StillSomeChunkBits(yaffs_Device * dev, int blk)
+{
+	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+	int i;
+	for (i = 0; i < dev->chunkBitmapStride; i++) {
+		if (*blkBits)
+			return 1;
+		blkBits++;
+	}
+	return 0;
+}
+
+static int yaffs_CountChunkBits(yaffs_Device * dev, int blk)
+{
+	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+	int i;
+	int n = 0;
+	for (i = 0; i < dev->chunkBitmapStride; i++) {
+		__u8 x = *blkBits;
+		while(x){
+			if(x & 1)
+				n++;
+			x >>=1;
+		}
+
+		blkBits++;
+	}
+	return n;
+}
+
+/*
+ * Verification code
+ */
+
+static int yaffs_SkipVerification(yaffs_Device *dev)
+{
+	return !(yaffs_traceMask & (YAFFS_TRACE_VERIFY | YAFFS_TRACE_VERIFY_FULL));
+}
+
+static int yaffs_SkipFullVerification(yaffs_Device *dev)
+{
+	return !(yaffs_traceMask & (YAFFS_TRACE_VERIFY_FULL));
+}
+
+static int yaffs_SkipNANDVerification(yaffs_Device *dev)
+{
+	return !(yaffs_traceMask & (YAFFS_TRACE_VERIFY_NAND));
+}
+
+static const char * blockStateName[] = {
+"Unknown",
+"Needs scanning",
+"Scanning",
+"Empty",
+"Allocating",
+"Full",
+"Dirty",
+"Checkpoint",
+"Collecting",
+"Dead"
+};
+
+static void yaffs_VerifyBlock(yaffs_Device *dev,yaffs_BlockInfo *bi,int n)
+{
+	int actuallyUsed;
+	int inUse;
+
+	if(yaffs_SkipVerification(dev))
+		return;
+
+	/* Report illegal runtime states */
+	if(bi->blockState <0 || bi->blockState >= YAFFS_NUMBER_OF_BLOCK_STATES)
+		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has undefined state %d"TENDSTR),n,bi->blockState));
+
+	switch(bi->blockState){
+	 case YAFFS_BLOCK_STATE_UNKNOWN:
+	 case YAFFS_BLOCK_STATE_SCANNING:
+	 case YAFFS_BLOCK_STATE_NEEDS_SCANNING:
+		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has bad run-state %s"TENDSTR),
+		n,blockStateName[bi->blockState]));
+	}
+
+	/* Check pages in use and soft deletions are legal */
+
+	actuallyUsed = bi->pagesInUse - bi->softDeletions;
+
+	if(bi->pagesInUse < 0 || bi->pagesInUse > dev->nChunksPerBlock ||
+	   bi->softDeletions < 0 || bi->softDeletions > dev->nChunksPerBlock ||
+	   actuallyUsed < 0 || actuallyUsed > dev->nChunksPerBlock)
+		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has illegal values pagesInUsed %d softDeletions %d"TENDSTR),
+		n,bi->pagesInUse,bi->softDeletions));
+
+
+	/* Check chunk bitmap legal */
+	inUse = yaffs_CountChunkBits(dev,n);
+	if(inUse != bi->pagesInUse)
+		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has inconsistent values pagesInUse %d counted chunk bits %d"TENDSTR),
+			n,bi->pagesInUse,inUse));
+
+	/* Check that the sequence number is valid.
+	 * Ten million is legal, but is very unlikely
+	 */
+	if(dev->isYaffs2 &&
+	   (bi->blockState == YAFFS_BLOCK_STATE_ALLOCATING || bi->blockState == YAFFS_BLOCK_STATE_FULL) &&
+	   (bi->sequenceNumber < YAFFS_LOWEST_SEQUENCE_NUMBER || bi->sequenceNumber > 10000000 ))
+		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has suspect sequence number of %d"TENDSTR),
+		n,bi->sequenceNumber));
+
+}
+
+static void yaffs_VerifyCollectedBlock(yaffs_Device *dev,yaffs_BlockInfo *bi,int n)
+{
+	yaffs_VerifyBlock(dev,bi,n);
+
+	/* After collection the block should be in the erased state */
+	/* TODO: This will need to change if we do partial gc */
+
+	if(bi->blockState != YAFFS_BLOCK_STATE_EMPTY){
+		T(YAFFS_TRACE_ERROR,(TSTR("Block %d is in state %d after gc, should be erased"TENDSTR),
+			n,bi->blockState));
+	}
+}
+
+static void yaffs_VerifyBlocks(yaffs_Device *dev)
+{
+	int i;
+	int nBlocksPerState[YAFFS_NUMBER_OF_BLOCK_STATES];
+	int nIllegalBlockStates = 0;
+
+
+	if(yaffs_SkipVerification(dev))
+		return;
+
+	memset(nBlocksPerState,0,sizeof(nBlocksPerState));
+
+
+	for(i = dev->internalStartBlock; i <= dev->internalEndBlock; i++){
+		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,i);
+		yaffs_VerifyBlock(dev,bi,i);
+
+		if(bi->blockState >=0 && bi->blockState < YAFFS_NUMBER_OF_BLOCK_STATES)
+			nBlocksPerState[bi->blockState]++;
+		else
+			nIllegalBlockStates++;
+
+	}
+
+	T(YAFFS_TRACE_VERIFY,(TSTR(""TENDSTR)));
+	T(YAFFS_TRACE_VERIFY,(TSTR("Block summary"TENDSTR)));
+
+	T(YAFFS_TRACE_VERIFY,(TSTR("%d blocks have illegal states"TENDSTR),nIllegalBlockStates));
+	if(nBlocksPerState[YAFFS_BLOCK_STATE_ALLOCATING] > 1)
+		T(YAFFS_TRACE_VERIFY,(TSTR("Too many allocating blocks"TENDSTR)));
+
+	for(i = 0; i < YAFFS_NUMBER_OF_BLOCK_STATES; i++)
+		T(YAFFS_TRACE_VERIFY,
+		  (TSTR("%s %d blocks"TENDSTR),
+		  blockStateName[i],nBlocksPerState[i]));
+
+	if(dev->blocksInCheckpoint != nBlocksPerState[YAFFS_BLOCK_STATE_CHECKPOINT])
+		T(YAFFS_TRACE_VERIFY,
+		 (TSTR("Checkpoint block count wrong dev %d count %d"TENDSTR),
+		 dev->blocksInCheckpoint, nBlocksPerState[YAFFS_BLOCK_STATE_CHECKPOINT]));
+
+	if(dev->nErasedBlocks != nBlocksPerState[YAFFS_BLOCK_STATE_EMPTY])
+		T(YAFFS_TRACE_VERIFY,
+		 (TSTR("Erased block count wrong dev %d count %d"TENDSTR),
+		 dev->nErasedBlocks, nBlocksPerState[YAFFS_BLOCK_STATE_EMPTY]));
+
+	if(nBlocksPerState[YAFFS_BLOCK_STATE_COLLECTING] > 1)
+		T(YAFFS_TRACE_VERIFY,
+		 (TSTR("Too many collecting blocks %d (max is 1)"TENDSTR),
+		 nBlocksPerState[YAFFS_BLOCK_STATE_COLLECTING]));
+
+	T(YAFFS_TRACE_VERIFY,(TSTR(""TENDSTR)));
+
+}
+
+/*
+ * Verify the object header. oh must be valid, but obj and tags may be NULL in which
+ * case those tests will not be performed.
+ */
+static void yaffs_VerifyObjectHeader(yaffs_Object *obj, yaffs_ObjectHeader *oh, yaffs_ExtendedTags *tags, int parentCheck)
+{
+	if(yaffs_SkipVerification(obj->myDev))
+		return;
+
+	if(!(tags && obj && oh)){
+	 	T(YAFFS_TRACE_VERIFY,
+		 		(TSTR("Verifying object header tags %x obj %x oh %x"TENDSTR),
+		 		(__u32)tags,(__u32)obj,(__u32)oh));
+		return;
+	}
+
+	if(oh->type <= YAFFS_OBJECT_TYPE_UNKNOWN ||
+	   oh->type > YAFFS_OBJECT_TYPE_MAX)
+	 	T(YAFFS_TRACE_VERIFY,
+		 (TSTR("Obj %d header type is illegal value 0x%x"TENDSTR),
+		 tags->objectId, oh->type));
+
+	if(tags->objectId != obj->objectId)
+	 	T(YAFFS_TRACE_VERIFY,
+		 (TSTR("Obj %d header mismatch objectId %d"TENDSTR),
+		 tags->objectId, obj->objectId));
+
+
+	/*
+	 * Check that the object's parent ids match if parentCheck requested.
+	 *
+	 * Tests do not apply to the root object.
+	 */
+
+	if(parentCheck && tags->objectId > 1 && !obj->parent)
+	 	T(YAFFS_TRACE_VERIFY,
+		 (TSTR("Obj %d header mismatch parentId %d obj->parent is NULL"TENDSTR),
+	 	 tags->objectId, oh->parentObjectId));
+
+
+	if(parentCheck && obj->parent &&
+	   oh->parentObjectId != obj->parent->objectId &&
+	   (oh->parentObjectId != YAFFS_OBJECTID_UNLINKED ||
+	    obj->parent->objectId != YAFFS_OBJECTID_DELETED))
+	 	T(YAFFS_TRACE_VERIFY,
+		 (TSTR("Obj %d header mismatch parentId %d parentObjectId %d"TENDSTR),
+	 	 tags->objectId, oh->parentObjectId, obj->parent->objectId));
+
+
+	if(tags->objectId > 1 && oh->name[0] == 0) /* Null name */
+		T(YAFFS_TRACE_VERIFY,
+		(TSTR("Obj %d header name is NULL"TENDSTR),
+		 obj->objectId));
+
+	if(tags->objectId > 1 && ((__u8)(oh->name[0])) == 0xff) /* Trashed name */
+		T(YAFFS_TRACE_VERIFY,
+		(TSTR("Obj %d header name is 0xFF"TENDSTR),
+		 obj->objectId));
+}
+
+
+
+static int yaffs_VerifyTnodeWorker(yaffs_Object * obj, yaffs_Tnode * tn,
+				  	__u32 level, int chunkOffset)
+{
+	int i;
+	yaffs_Device *dev = obj->myDev;
+	int ok = 1;
+	int nTnodeBytes = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
+
+	if (tn) {
+		if (level > 0) {
+
+			for (i = 0; i < YAFFS_NTNODES_INTERNAL && ok; i++){
+				if (tn->internal[i]) {
+					ok = yaffs_VerifyTnodeWorker(obj,
+							tn->internal[i],
+							level - 1,
+							(chunkOffset<<YAFFS_TNODES_INTERNAL_BITS) + i);
+				}
+			}
+		} else if (level == 0) {
+			int i;
+			yaffs_ExtendedTags tags;
+			__u32 objectId = obj->objectId;
+
+			chunkOffset <<=  YAFFS_TNODES_LEVEL0_BITS;
+
+			for(i = 0; i < YAFFS_NTNODES_LEVEL0; i++){
+				__u32 theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
+
+				if(theChunk > 0){
+					/* T(~0,(TSTR("verifying (%d:%d) %d"TENDSTR),tags.objectId,tags.chunkId,theChunk)); */
+					yaffs_ReadChunkWithTagsFromNAND(dev,theChunk,NULL, &tags);
+					if(tags.objectId != objectId || tags.chunkId != chunkOffset){
+						T(~0,(TSTR("Object %d chunkId %d NAND mismatch chunk %d tags (%d:%d)"TENDSTR),
+							objectId, chunkOffset, theChunk,
+							tags.objectId, tags.chunkId));
+					}
+				}
+				chunkOffset++;
+			}
+		}
+	}
+
+	return ok;
+
+}
+
+
+static void yaffs_VerifyFile(yaffs_Object *obj)
+{
+	int requiredTallness;
+	int actualTallness;
+	__u32 lastChunk;
+	__u32 x;
+	__u32 i;
+	int ok;
+	yaffs_Device *dev;
+	yaffs_ExtendedTags tags;
+	yaffs_Tnode *tn;
+	__u32 objectId;
+
+	if(obj && yaffs_SkipVerification(obj->myDev))
+		return;
+
+	dev = obj->myDev;
+	objectId = obj->objectId;
+
+	/* Check file size is consistent with tnode depth */
+	lastChunk =  obj->variant.fileVariant.fileSize / dev->nDataBytesPerChunk + 1;
+	x = lastChunk >> YAFFS_TNODES_LEVEL0_BITS;
+	requiredTallness = 0;
+	while (x> 0) {
+		x >>= YAFFS_TNODES_INTERNAL_BITS;
+		requiredTallness++;
+	}
+
+	actualTallness = obj->variant.fileVariant.topLevel;
+
+	if(requiredTallness > actualTallness )
+		T(YAFFS_TRACE_VERIFY,
+		(TSTR("Obj %d had tnode tallness %d, needs to be %d"TENDSTR),
+		 obj->objectId,actualTallness, requiredTallness));
+
+
+	/* Check that the chunks in the tnode tree are all correct.
+	 * We do this by scanning through the tnode tree and
+	 * checking the tags for every chunk match.
+	 */
+
+	if(yaffs_SkipNANDVerification(dev))
+		return;
+
+	for(i = 1; i <= lastChunk; i++){
+		tn = yaffs_FindLevel0Tnode(dev, &obj->variant.fileVariant,i);
+
+		if (tn) {
+			__u32 theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
+			if(theChunk > 0){
+				/* T(~0,(TSTR("verifying (%d:%d) %d"TENDSTR),objectId,i,theChunk)); */
+				yaffs_ReadChunkWithTagsFromNAND(dev,theChunk,NULL, &tags);
+				if(tags.objectId != objectId || tags.chunkId != i){
+					T(~0,(TSTR("Object %d chunkId %d NAND mismatch chunk %d tags (%d:%d)"TENDSTR),
+						objectId, i, theChunk,
+						tags.objectId, tags.chunkId));
+				}
+			}
+		}
+
+	}
+
+}
+
+static void yaffs_VerifyDirectory(yaffs_Object *obj)
+{
+	if(obj && yaffs_SkipVerification(obj->myDev))
+		return;
+
+}
+
+static void yaffs_VerifyHardLink(yaffs_Object *obj)
+{
+	if(obj && yaffs_SkipVerification(obj->myDev))
+		return;
+
+	/* Verify sane equivalent object */
+}
+
+static void yaffs_VerifySymlink(yaffs_Object *obj)
+{
+	if(obj && yaffs_SkipVerification(obj->myDev))
+		return;
+
+	/* Verify symlink string */
+}
+
+static void yaffs_VerifySpecial(yaffs_Object *obj)
+{
+	if(obj && yaffs_SkipVerification(obj->myDev))
+		return;
+}
+
+static void yaffs_VerifyObject(yaffs_Object *obj)
+{
+	yaffs_Device *dev;
+
+	__u32 chunkMin;
+	__u32 chunkMax;
+
+	__u32 chunkIdOk;
+	__u32 chunkIsLive;
+
+	if(!obj)
+		return;
+
+	dev = obj->myDev;
+
+	if(yaffs_SkipVerification(dev))
+		return;
+
+	/* Check sane object header chunk */
+
+	chunkMin = dev->internalStartBlock * dev->nChunksPerBlock;
+	chunkMax = (dev->internalEndBlock+1) * dev->nChunksPerBlock - 1;
+
+	chunkIdOk = (obj->chunkId >= chunkMin && obj->chunkId <= chunkMax);
+	chunkIsLive = chunkIdOk &&
+			yaffs_CheckChunkBit(dev,
+					    obj->chunkId / dev->nChunksPerBlock,
+					    obj->chunkId % dev->nChunksPerBlock);
+	if(!obj->fake &&
+	    (!chunkIdOk || !chunkIsLive)) {
+	   T(YAFFS_TRACE_VERIFY,
+	   (TSTR("Obj %d has chunkId %d %s %s"TENDSTR),
+	   obj->objectId,obj->chunkId,
+	   chunkIdOk ? "" : ",out of range",
+	   chunkIsLive || !chunkIdOk ? "" : ",marked as deleted"));
+	}
+
+	if(chunkIdOk && chunkIsLive &&!yaffs_SkipNANDVerification(dev)) {
+		yaffs_ExtendedTags tags;
+		yaffs_ObjectHeader *oh;
+		__u8 *buffer = yaffs_GetTempBuffer(dev,__LINE__);
+
+		oh = (yaffs_ObjectHeader *)buffer;
+
+		yaffs_ReadChunkWithTagsFromNAND(dev, obj->chunkId,buffer, &tags);
+
+		yaffs_VerifyObjectHeader(obj,oh,&tags,1);
+
+		yaffs_ReleaseTempBuffer(dev,buffer,__LINE__);
+	}
+
+	/* Verify it has a parent */
+	if(obj && !obj->fake &&
+	   (!obj->parent || obj->parent->myDev != dev)){
+	   T(YAFFS_TRACE_VERIFY,
+	   (TSTR("Obj %d has parent pointer %p which does not look like an object"TENDSTR),
+	   obj->objectId,obj->parent));
+	}
+
+	/* Verify parent is a directory */
+	if(obj->parent && obj->parent->variantType != YAFFS_OBJECT_TYPE_DIRECTORY){
+	   T(YAFFS_TRACE_VERIFY,
+	   (TSTR("Obj %d's parent is not a directory (type %d)"TENDSTR),
+	   obj->objectId,obj->parent->variantType));
+	}
+
+	switch(obj->variantType){
+	case YAFFS_OBJECT_TYPE_FILE:
+		yaffs_VerifyFile(obj);
+		break;
+	case YAFFS_OBJECT_TYPE_SYMLINK:
+		yaffs_VerifySymlink(obj);
+		break;
+	case YAFFS_OBJECT_TYPE_DIRECTORY:
+		yaffs_VerifyDirectory(obj);
+		break;
+	case YAFFS_OBJECT_TYPE_HARDLINK:
+		yaffs_VerifyHardLink(obj);
+		break;
+	case YAFFS_OBJECT_TYPE_SPECIAL:
+		yaffs_VerifySpecial(obj);
+		break;
+	case YAFFS_OBJECT_TYPE_UNKNOWN:
+	default:
+		T(YAFFS_TRACE_VERIFY,
+		(TSTR("Obj %d has illegaltype %d"TENDSTR),
+		obj->objectId,obj->variantType));
+		break;
+	}
+
+
+}
+
+static void yaffs_VerifyObjects(yaffs_Device *dev)
+{
+	yaffs_Object *obj;
+	int i;
+	struct list_head *lh;
+
+	if(yaffs_SkipVerification(dev))
+		return;
+
+	/* Iterate through the objects in each hash entry */
+
+	 for(i = 0; i <  YAFFS_NOBJECT_BUCKETS; i++){
+	 	list_for_each(lh, &dev->objectBucket[i].list) {
+			if (lh) {
+				obj = list_entry(lh, yaffs_Object, hashLink);
+				yaffs_VerifyObject(obj);
+			}
+		}
+	 }
+
+}
+
+
+/*
+ *  Simple hash function. Needs to have a reasonable spread
+ */
+
+static Y_INLINE int yaffs_HashFunction(int n)
+{
+	n = abs(n);
+	return (n % YAFFS_NOBJECT_BUCKETS);
+}
+
+/*
+ * Access functions to useful fake objects
+ */
+
+yaffs_Object *yaffs_Root(yaffs_Device * dev)
+{
+	return dev->rootDir;
+}
+
+yaffs_Object *yaffs_LostNFound(yaffs_Device * dev)
+{
+	return dev->lostNFoundDir;
+}
+
+
+/*
+ *  Erased NAND checking functions
+ */
+
+int yaffs_CheckFF(__u8 * buffer, int nBytes)
+{
+	/* Horrible, slow implementation */
+	while (nBytes--) {
+		if (*buffer != 0xFF)
+			return 0;
+		buffer++;
+	}
+	return 1;
+}
+
+static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev,
+				  int chunkInNAND)
+{
+
+	int retval = YAFFS_OK;
+	__u8 *data = yaffs_GetTempBuffer(dev, __LINE__);
+	yaffs_ExtendedTags tags;
+	int result;
+
+	result = yaffs_ReadChunkWithTagsFromNAND(dev, chunkInNAND, data, &tags);
+
+	if(tags.eccResult > YAFFS_ECC_RESULT_NO_ERROR)
+		retval = YAFFS_FAIL;
+
+
+	if (!yaffs_CheckFF(data, dev->nDataBytesPerChunk) || tags.chunkUsed) {
+		T(YAFFS_TRACE_NANDACCESS,
+		  (TSTR("Chunk %d not erased" TENDSTR), chunkInNAND));
+		retval = YAFFS_FAIL;
+	}
+
+	yaffs_ReleaseTempBuffer(dev, data, __LINE__);
+
+	return retval;
+
+}
+
+
+static int yaffs_WriteNewChunkWithTagsToNAND(struct yaffs_DeviceStruct *dev,
+					     const __u8 * data,
+					     yaffs_ExtendedTags * tags,
+					     int useReserve)
+{
+	int attempts = 0;
+	int writeOk = 0;
+	int chunk;
+
+	yaffs_InvalidateCheckpoint(dev);
+
+	do {
+		yaffs_BlockInfo *bi = 0;
+		int erasedOk = 0;
+
+		chunk = yaffs_AllocateChunk(dev, useReserve, &bi);
+		if (chunk < 0) {
+			/* no space */
+			break;
+		}
+
+		/* First check this chunk is erased, if it needs
+		 * checking.  The checking policy (unless forced
+		 * always on) is as follows:
+		 *
+		 * Check the first page we try to write in a block.
+		 * If the check passes then we don't need to check any
+		 * more.	If the check fails, we check again...
+		 * If the block has been erased, we don't need to check.
+		 *
+		 * However, if the block has been prioritised for gc,
+		 * then we think there might be something odd about
+		 * this block and stop using it.
+		 *
+		 * Rationale: We should only ever see chunks that have
+		 * not been erased if there was a partially written
+		 * chunk due to power loss.  This checking policy should
+		 * catch that case with very few checks and thus save a
+		 * lot of checks that are most likely not needed.
+		 */
+		if (bi->gcPrioritise) {
+			yaffs_DeleteChunk(dev, chunk, 1, __LINE__);
+			/* try another chunk */
+			continue;
+		}
+
+		/* let's give it a try */
+		attempts++;
+
+#ifdef CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED
+		bi->skipErasedCheck = 0;
+#endif
+		if (!bi->skipErasedCheck) {
+			erasedOk = yaffs_CheckChunkErased(dev, chunk);
+			if (erasedOk != YAFFS_OK) {
+				T(YAFFS_TRACE_ERROR,
+				(TSTR ("**>> yaffs chunk %d was not erased"
+				TENDSTR), chunk));
+
+				/* try another chunk */
+				continue;
+			}
+			bi->skipErasedCheck = 1;
+		}
+
+		writeOk = yaffs_WriteChunkWithTagsToNAND(dev, chunk,
+				data, tags);
+		if (writeOk != YAFFS_OK) {
+			yaffs_HandleWriteChunkError(dev, chunk, erasedOk);
+			/* try another chunk */
+			continue;
+		}
+
+		/* Copy the data into the robustification buffer */
+		yaffs_HandleWriteChunkOk(dev, chunk, data, tags);
+
+	} while (writeOk != YAFFS_OK && attempts < yaffs_wr_attempts);
+
+	if (attempts > 1) {
+		T(YAFFS_TRACE_ERROR,
+			(TSTR("**>> yaffs write required %d attempts" TENDSTR),
+			attempts));
+
+		dev->nRetriedWrites += (attempts - 1);
+	}
+
+	return chunk;
+}
+
+/*
+ * Block retiring for handling a broken block.
+ */
+
+static void yaffs_RetireBlock(yaffs_Device * dev, int blockInNAND)
+{
+	yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, blockInNAND);
+
+	yaffs_InvalidateCheckpoint(dev);
+
+	yaffs_MarkBlockBad(dev, blockInNAND);
+
+	bi->blockState = YAFFS_BLOCK_STATE_DEAD;
+	bi->gcPrioritise = 0;
+	bi->needsRetiring = 0;
+
+	dev->nRetiredBlocks++;
+}
+
+/*
+ * Functions for robustisizing TODO
+ *
+ */
+
+static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+				     const __u8 * data,
+				     const yaffs_ExtendedTags * tags)
+{
+}
+
+static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+				    const yaffs_ExtendedTags * tags)
+{
+}
+
+void yaffs_HandleChunkError(yaffs_Device *dev, yaffs_BlockInfo *bi)
+{
+	if(!bi->gcPrioritise){
+		bi->gcPrioritise = 1;
+		dev->hasPendingPrioritisedGCs = 1;
+		bi->chunkErrorStrikes ++;
+
+		if(bi->chunkErrorStrikes > 3){
+			bi->needsRetiring = 1; /* Too many stikes, so retire this */
+			T(YAFFS_TRACE_ALWAYS, (TSTR("yaffs: Block struck out" TENDSTR)));
+
+		}
+
+	}
+}
+
+static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND, int erasedOk)
+{
+
+	int blockInNAND = chunkInNAND / dev->nChunksPerBlock;
+	yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, blockInNAND);
+
+	yaffs_HandleChunkError(dev,bi);
+
+
+	if(erasedOk ) {
+		/* Was an actual write failure, so mark the block for retirement  */
+		bi->needsRetiring = 1;
+		T(YAFFS_TRACE_ERROR | YAFFS_TRACE_BAD_BLOCKS,
+		  (TSTR("**>> Block %d needs retiring" TENDSTR), blockInNAND));
+
+
+	}
+
+	/* Delete the chunk */
+	yaffs_DeleteChunk(dev, chunkInNAND, 1, __LINE__);
+}
+
+
+/*---------------- Name handling functions ------------*/
+
+static __u16 yaffs_CalcNameSum(const YCHAR * name)
+{
+	__u16 sum = 0;
+	__u16 i = 1;
+
+	YUCHAR *bname = (YUCHAR *) name;
+	if (bname) {
+		while ((*bname) && (i < (YAFFS_MAX_NAME_LENGTH/2))) {
+
+#ifdef CONFIG_YAFFS_CASE_INSENSITIVE
+			sum += yaffs_toupper(*bname) * i;
+#else
+			sum += (*bname) * i;
+#endif
+			i++;
+			bname++;
+		}
+	}
+	return sum;
+}
+
+static void yaffs_SetObjectName(yaffs_Object * obj, const YCHAR * name)
+{
+#ifdef CONFIG_YAFFS_SHORT_NAMES_IN_RAM
+	if (name && yaffs_strlen(name) <= YAFFS_SHORT_NAME_LENGTH) {
+		yaffs_strcpy(obj->shortName, name);
+	} else {
+		obj->shortName[0] = _Y('\0');
+	}
+#endif
+	obj->sum = yaffs_CalcNameSum(name);
+}
+
+/*-------------------- TNODES -------------------
+
+ * List of spare tnodes
+ * The list is hooked together using the first pointer
+ * in the tnode.
+ */
+
+/* yaffs_CreateTnodes creates a bunch more tnodes and
+ * adds them to the tnode free list.
+ * Don't use this function directly
+ */
+
+static int yaffs_CreateTnodes(yaffs_Device * dev, int nTnodes)
+{
+	int i;
+	int tnodeSize;
+	yaffs_Tnode *newTnodes;
+	__u8 *mem;
+	yaffs_Tnode *curr;
+	yaffs_Tnode *next;
+	yaffs_TnodeList *tnl;
+
+	if (nTnodes < 1)
+		return YAFFS_OK;
+
+	/* Calculate the tnode size in bytes for variable width tnode support.
+	 * Must be a multiple of 32-bits  */
+	tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
+
+	/* make these things */
+
+	newTnodes = YMALLOC(nTnodes * tnodeSize);
+	mem = (__u8 *)newTnodes;
+
+	if (!newTnodes) {
+		T(YAFFS_TRACE_ERROR,
+		  (TSTR("yaffs: Could not allocate Tnodes" TENDSTR)));
+		return YAFFS_FAIL;
+	}
+
+	/* Hook them into the free list */
+#if 0
+	for (i = 0; i < nTnodes - 1; i++) {
+		newTnodes[i].internal[0] = &newTnodes[i + 1];
+#ifdef CONFIG_YAFFS_TNODE_LIST_DEBUG
+		newTnodes[i].internal[YAFFS_NTNODES_INTERNAL] = (void *)1;
+#endif
+	}
+
+	newTnodes[nTnodes - 1].internal[0] = dev->freeTnodes;
+#ifdef CONFIG_YAFFS_TNODE_LIST_DEBUG
+	newTnodes[nTnodes - 1].internal[YAFFS_NTNODES_INTERNAL] = (void *)1;
+#endif
+	dev->freeTnodes = newTnodes;
+#else
+	/* New hookup for wide tnodes */
+	for(i = 0; i < nTnodes -1; i++) {
+		curr = (yaffs_Tnode *) &mem[i * tnodeSize];
+		next = (yaffs_Tnode *) &mem[(i+1) * tnodeSize];
+		curr->internal[0] = next;
+	}
+
+	curr = (yaffs_Tnode *) &mem[(nTnodes - 1) * tnodeSize];
+	curr->internal[0] = dev->freeTnodes;
+	dev->freeTnodes = (yaffs_Tnode *)mem;
+
+#endif
+
+
+	dev->nFreeTnodes += nTnodes;
+	dev->nTnodesCreated += nTnodes;
+
+	/* Now add this bunch of tnodes to a list for freeing up.
+	 * NB If we can't add this to the management list it isn't fatal
+	 * but it just means we can't free this bunch of tnodes later.
+	 */
+
+	tnl = YMALLOC(sizeof(yaffs_TnodeList));
+	if (!tnl) {
+		T(YAFFS_TRACE_ERROR,
+		  (TSTR
+		   ("yaffs: Could not add tnodes to management list" TENDSTR)));
+		   return YAFFS_FAIL;
+
+	} else {
+		tnl->tnodes = newTnodes;
+		tnl->next = dev->allocatedTnodeList;
+		dev->allocatedTnodeList = tnl;
+	}
+
+	T(YAFFS_TRACE_ALLOCATE, (TSTR("yaffs: Tnodes added" TENDSTR)));
+
+	return YAFFS_OK;
+}
+
+/* GetTnode gets us a clean tnode. Tries to make allocate more if we run out */
+
+static yaffs_Tnode *yaffs_GetTnodeRaw(yaffs_Device * dev)
+{
+	yaffs_Tnode *tn = NULL;
+
+	/* If there are none left make more */
+	if (!dev->freeTnodes) {
+		yaffs_CreateTnodes(dev, YAFFS_ALLOCATION_NTNODES);
+	}
+
+	if (dev->freeTnodes) {
+		tn = dev->freeTnodes;
+#ifdef CONFIG_YAFFS_TNODE_LIST_DEBUG
+		if (tn->internal[YAFFS_NTNODES_INTERNAL] != (void *)1) {
+			/* Hoosterman, this thing looks like it isn't in the list */
+			T(YAFFS_TRACE_ALWAYS,
+			  (TSTR("yaffs: Tnode list bug 1" TENDSTR)));
+		}
+#endif
+		dev->freeTnodes = dev->freeTnodes->internal[0];
+		dev->nFreeTnodes--;
+	}
+
+	return tn;
+}
+
+static yaffs_Tnode *yaffs_GetTnode(yaffs_Device * dev)
+{
+	yaffs_Tnode *tn = yaffs_GetTnodeRaw(dev);
+
+	if(tn)
+		memset(tn, 0, (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8);
+
+	return tn;
+}
+
+/* FreeTnode frees up a tnode and puts it back on the free list */
+static void yaffs_FreeTnode(yaffs_Device * dev, yaffs_Tnode * tn)
+{
+	if (tn) {
+#ifdef CONFIG_YAFFS_TNODE_LIST_DEBUG
+		if (tn->internal[YAFFS_NTNODES_INTERNAL] != 0) {
+			/* Hoosterman, this thing looks like it is already in the list */
+			T(YAFFS_TRACE_ALWAYS,
+			  (TSTR("yaffs: Tnode list bug 2" TENDSTR)));
+		}
+		tn->internal[YAFFS_NTNODES_INTERNAL] = (void *)1;
+#endif
+		tn->internal[0] = dev->freeTnodes;
+		dev->freeTnodes = tn;
+		dev->nFreeTnodes++;
+	}
+}
+
+static void yaffs_DeinitialiseTnodes(yaffs_Device * dev)
+{
+	/* Free the list of allocated tnodes */
+	yaffs_TnodeList *tmp;
+
+	while (dev->allocatedTnodeList) {
+		tmp = dev->allocatedTnodeList->next;
+
+		YFREE(dev->allocatedTnodeList->tnodes);
+		YFREE(dev->allocatedTnodeList);
+		dev->allocatedTnodeList = tmp;
+
+	}
+
+	dev->freeTnodes = NULL;
+	dev->nFreeTnodes = 0;
+}
+
+static void yaffs_InitialiseTnodes(yaffs_Device * dev)
+{
+	dev->allocatedTnodeList = NULL;
+	dev->freeTnodes = NULL;
+	dev->nFreeTnodes = 0;
+	dev->nTnodesCreated = 0;
+
+}
+
+
+void yaffs_PutLevel0Tnode(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos, unsigned val)
+{
+  __u32 *map = (__u32 *)tn;
+  __u32 bitInMap;
+  __u32 bitInWord;
+  __u32 wordInMap;
+  __u32 mask;
+
+  pos &= YAFFS_TNODES_LEVEL0_MASK;
+  val >>= dev->chunkGroupBits;
+
+  bitInMap = pos * dev->tnodeWidth;
+  wordInMap = bitInMap /32;
+  bitInWord = bitInMap & (32 -1);
+
+  mask = dev->tnodeMask << bitInWord;
+
+  map[wordInMap] &= ~mask;
+  map[wordInMap] |= (mask & (val << bitInWord));
+
+  if(dev->tnodeWidth > (32-bitInWord)) {
+    bitInWord = (32 - bitInWord);
+    wordInMap++;;
+    mask = dev->tnodeMask >> (/*dev->tnodeWidth -*/ bitInWord);
+    map[wordInMap] &= ~mask;
+    map[wordInMap] |= (mask & (val >> bitInWord));
+  }
+}
+
+static __u32 yaffs_GetChunkGroupBase(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos)
+{
+  __u32 *map = (__u32 *)tn;
+  __u32 bitInMap;
+  __u32 bitInWord;
+  __u32 wordInMap;
+  __u32 val;
+
+  pos &= YAFFS_TNODES_LEVEL0_MASK;
+
+  bitInMap = pos * dev->tnodeWidth;
+  wordInMap = bitInMap /32;
+  bitInWord = bitInMap & (32 -1);
+
+  val = map[wordInMap] >> bitInWord;
+
+  if(dev->tnodeWidth > (32-bitInWord)) {
+    bitInWord = (32 - bitInWord);
+    wordInMap++;;
+    val |= (map[wordInMap] << bitInWord);
+  }
+
+  val &= dev->tnodeMask;
+  val <<= dev->chunkGroupBits;
+
+  return val;
+}
+
+/* ------------------- End of individual tnode manipulation -----------------*/
+
+/* ---------Functions to manipulate the look-up tree (made up of tnodes) ------
+ * The look up tree is represented by the top tnode and the number of topLevel
+ * in the tree. 0 means only the level 0 tnode is in the tree.
+ */
+
+/* FindLevel0Tnode finds the level 0 tnode, if one exists. */
+static yaffs_Tnode *yaffs_FindLevel0Tnode(yaffs_Device * dev,
+					  yaffs_FileStructure * fStruct,
+					  __u32 chunkId)
+{
+
+	yaffs_Tnode *tn = fStruct->top;
+	__u32 i;
+	int requiredTallness;
+	int level = fStruct->topLevel;
+
+	/* Check sane level and chunk Id */
+	if (level < 0 || level > YAFFS_TNODES_MAX_LEVEL) {
+		return NULL;
+	}
+
+	if (chunkId > YAFFS_MAX_CHUNK_ID) {
+		return NULL;
+	}
+
+	/* First check we're tall enough (ie enough topLevel) */
+
+	i = chunkId >> YAFFS_TNODES_LEVEL0_BITS;
+	requiredTallness = 0;
+	while (i) {
+		i >>= YAFFS_TNODES_INTERNAL_BITS;
+		requiredTallness++;
+	}
+
+	if (requiredTallness > fStruct->topLevel) {
+		/* Not tall enough, so we can't find it, return NULL. */
+		return NULL;
+	}
+
+	/* Traverse down to level 0 */
+	while (level > 0 && tn) {
+		tn = tn->
+		    internal[(chunkId >>
+			       ( YAFFS_TNODES_LEVEL0_BITS +
+			         (level - 1) *
+			         YAFFS_TNODES_INTERNAL_BITS)
+			      ) &
+			     YAFFS_TNODES_INTERNAL_MASK];
+		level--;
+
+	}
+
+	return tn;
+}
+
+/* AddOrFindLevel0Tnode finds the level 0 tnode if it exists, otherwise first expands the tree.
+ * This happens in two steps:
+ *  1. If the tree isn't tall enough, then make it taller.
+ *  2. Scan down the tree towards the level 0 tnode adding tnodes if required.
+ *
+ * Used when modifying the tree.
+ *
+ *  If the tn argument is NULL, then a fresh tnode will be added otherwise the specified tn will
+ *  be plugged into the ttree.
+ */
+
+static yaffs_Tnode *yaffs_AddOrFindLevel0Tnode(yaffs_Device * dev,
+					       yaffs_FileStructure * fStruct,
+					       __u32 chunkId,
+					       yaffs_Tnode *passedTn)
+{
+
+	int requiredTallness;
+	int i;
+	int l;
+	yaffs_Tnode *tn;
+
+	__u32 x;
+
+
+	/* Check sane level and page Id */
+	if (fStruct->topLevel < 0 || fStruct->topLevel > YAFFS_TNODES_MAX_LEVEL) {
+		return NULL;
+	}
+
+	if (chunkId > YAFFS_MAX_CHUNK_ID) {
+		return NULL;
+	}
+
+	/* First check we're tall enough (ie enough topLevel) */
+
+	x = chunkId >> YAFFS_TNODES_LEVEL0_BITS;
+	requiredTallness = 0;
+	while (x) {
+		x >>= YAFFS_TNODES_INTERNAL_BITS;
+		requiredTallness++;
+	}
+
+
+	if (requiredTallness > fStruct->topLevel) {
+		/* Not tall enough,gotta make the tree taller */
+		for (i = fStruct->topLevel; i < requiredTallness; i++) {
+
+			tn = yaffs_GetTnode(dev);
+
+			if (tn) {
+				tn->internal[0] = fStruct->top;
+				fStruct->top = tn;
+			} else {
+				T(YAFFS_TRACE_ERROR,
+				  (TSTR("yaffs: no more tnodes" TENDSTR)));
+			}
+		}
+
+		fStruct->topLevel = requiredTallness;
+	}
+
+	/* Traverse down to level 0, adding anything we need */
+
+	l = fStruct->topLevel;
+	tn = fStruct->top;
+
+	if(l > 0) {
+		while (l > 0 && tn) {
+			x = (chunkId >>
+			     ( YAFFS_TNODES_LEVEL0_BITS +
+			      (l - 1) * YAFFS_TNODES_INTERNAL_BITS)) &
+			    YAFFS_TNODES_INTERNAL_MASK;
+
+
+			if((l>1) && !tn->internal[x]){
+				/* Add missing non-level-zero tnode */
+				tn->internal[x] = yaffs_GetTnode(dev);
+
+			} else if(l == 1) {
+				/* Looking from level 1 at level 0 */
+			 	if (passedTn) {
+					/* If we already have one, then release it.*/
+					if(tn->internal[x])
+						yaffs_FreeTnode(dev,tn->internal[x]);
+					tn->internal[x] = passedTn;
+
+				} else if(!tn->internal[x]) {
+					/* Don't have one, none passed in */
+					tn->internal[x] = yaffs_GetTnode(dev);
+				}
+			}
+
+			tn = tn->internal[x];
+			l--;
+		}
+	} else {
+		/* top is level 0 */
+		if(passedTn) {
+			memcpy(tn,passedTn,(dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8);
+			yaffs_FreeTnode(dev,passedTn);
+		}
+	}
+
+	return tn;
+}
+
+static int yaffs_FindChunkInGroup(yaffs_Device * dev, int theChunk,
+				  yaffs_ExtendedTags * tags, int objectId,
+				  int chunkInInode)
+{
+	int j;
+
+	for (j = 0; theChunk && j < dev->chunkGroupSize; j++) {
+		if (yaffs_CheckChunkBit
+		    (dev, theChunk / dev->nChunksPerBlock,
+		     theChunk % dev->nChunksPerBlock)) {
+			yaffs_ReadChunkWithTagsFromNAND(dev, theChunk, NULL,
+							tags);
+			if (yaffs_TagsMatch(tags, objectId, chunkInInode)) {
+				/* found it; */
+				return theChunk;
+
+			}
+		}
+		theChunk++;
+	}
+	return -1;
+}
+
+
+/* DeleteWorker scans backwards through the tnode tree and deletes all the
+ * chunks and tnodes in the file
+ * Returns 1 if the tree was deleted.
+ * Returns 0 if it stopped early due to hitting the limit and the delete is incomplete.
+ */
+
+static int yaffs_DeleteWorker(yaffs_Object * in, yaffs_Tnode * tn, __u32 level,
+			      int chunkOffset, int *limit)
+{
+	int i;
+	int chunkInInode;
+	int theChunk;
+	yaffs_ExtendedTags tags;
+	int foundChunk;
+	yaffs_Device *dev = in->myDev;
+
+	int allDone = 1;
+
+	if (tn) {
+		if (level > 0) {
+
+			for (i = YAFFS_NTNODES_INTERNAL - 1; allDone && i >= 0;
+			     i--) {
+				if (tn->internal[i]) {
+					if (limit && (*limit) < 0) {
+						allDone = 0;
+					} else {
+						allDone =
+						    yaffs_DeleteWorker(in,
+								       tn->
+								       internal
+								       [i],
+								       level -
+								       1,
+								       (chunkOffset
+									<<
+									YAFFS_TNODES_INTERNAL_BITS)
+								       + i,
+								       limit);
+					}
+					if (allDone) {
+						yaffs_FreeTnode(dev,
+								tn->
+								internal[i]);
+						tn->internal[i] = NULL;
+					}
+				}
+
+			}
+			return (allDone) ? 1 : 0;
+		} else if (level == 0) {
+			int hitLimit = 0;
+
+			for (i = YAFFS_NTNODES_LEVEL0 - 1; i >= 0 && !hitLimit;
+			     i--) {
+			        theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
+				if (theChunk) {
+
+					chunkInInode =
+					    (chunkOffset <<
+					     YAFFS_TNODES_LEVEL0_BITS) + i;
+
+					foundChunk =
+					    yaffs_FindChunkInGroup(dev,
+								   theChunk,
+								   &tags,
+								   in->objectId,
+								   chunkInInode);
+
+					if (foundChunk > 0) {
+						yaffs_DeleteChunk(dev,
+								  foundChunk, 1,
+								  __LINE__);
+						in->nDataChunks--;
+						if (limit) {
+							*limit = *limit - 1;
+							if (*limit <= 0) {
+								hitLimit = 1;
+							}
+						}
+
+					}
+
+					yaffs_PutLevel0Tnode(dev,tn,i,0);
+				}
+
+			}
+			return (i < 0) ? 1 : 0;
+
+		}
+
+	}
+
+	return 1;
+
+}
+
+static void yaffs_SoftDeleteChunk(yaffs_Device * dev, int chunk)
+{
+
+	yaffs_BlockInfo *theBlock;
+
+	T(YAFFS_TRACE_DELETION, (TSTR("soft delete chunk %d" TENDSTR), chunk));
+
+	theBlock = yaffs_GetBlockInfo(dev, chunk / dev->nChunksPerBlock);
+	if (theBlock) {
+		theBlock->softDeletions++;
+		dev->nFreeChunks++;
+	}
+}
+
+/* SoftDeleteWorker scans backwards through the tnode tree and soft deletes all the chunks in the file.
+ * All soft deleting does is increment the block's softdelete count and pulls the chunk out
+ * of the tnode.
+ * Thus, essentially this is the same as DeleteWorker except that the chunks are soft deleted.
+ */
+
+static int yaffs_SoftDeleteWorker(yaffs_Object * in, yaffs_Tnode * tn,
+				  __u32 level, int chunkOffset)
+{
+	int i;
+	int theChunk;
+	int allDone = 1;
+	yaffs_Device *dev = in->myDev;
+
+	if (tn) {
+		if (level > 0) {
+
+			for (i = YAFFS_NTNODES_INTERNAL - 1; allDone && i >= 0;
+			     i--) {
+				if (tn->internal[i]) {
+					allDone =
+					    yaffs_SoftDeleteWorker(in,
+								   tn->
+								   internal[i],
+								   level - 1,
+								   (chunkOffset
+								    <<
+								    YAFFS_TNODES_INTERNAL_BITS)
+								   + i);
+					if (allDone) {
+						yaffs_FreeTnode(dev,
+								tn->
+								internal[i]);
+						tn->internal[i] = NULL;
+					} else {
+						/* Hoosterman... how could this happen? */
+					}
+				}
+			}
+			return (allDone) ? 1 : 0;
+		} else if (level == 0) {
+
+			for (i = YAFFS_NTNODES_LEVEL0 - 1; i >= 0; i--) {
+				theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
+				if (theChunk) {
+					/* Note this does not find the real chunk, only the chunk group.
+					 * We make an assumption that a chunk group is not larger than
+					 * a block.
+					 */
+					yaffs_SoftDeleteChunk(dev, theChunk);
+					yaffs_PutLevel0Tnode(dev,tn,i,0);
+				}
+
+			}
+			return 1;
+
+		}
+
+	}
+
+	return 1;
+
+}
+
+static void yaffs_SoftDeleteFile(yaffs_Object * obj)
+{
+	if (obj->deleted &&
+	    obj->variantType == YAFFS_OBJECT_TYPE_FILE && !obj->softDeleted) {
+		if (obj->nDataChunks <= 0) {
+			/* Empty file with no duplicate object headers, just delete it immediately */
+			yaffs_FreeTnode(obj->myDev,
+					obj->variant.fileVariant.top);
+			obj->variant.fileVariant.top = NULL;
+			T(YAFFS_TRACE_TRACING,
+			  (TSTR("yaffs: Deleting empty file %d" TENDSTR),
+			   obj->objectId));
+			yaffs_DoGenericObjectDeletion(obj);
+		} else {
+			yaffs_SoftDeleteWorker(obj,
+					       obj->variant.fileVariant.top,
+					       obj->variant.fileVariant.
+					       topLevel, 0);
+			obj->softDeleted = 1;
+		}
+	}
+}
+
+/* Pruning removes any part of the file structure tree that is beyond the
+ * bounds of the file (ie that does not point to chunks).
+ *
+ * A file should only get pruned when its size is reduced.
+ *
+ * Before pruning, the chunks must be pulled from the tree and the
+ * level 0 tnode entries must be zeroed out.
+ * Could also use this for file deletion, but that's probably better handled
+ * by a special case.
+ */
+
+static yaffs_Tnode *yaffs_PruneWorker(yaffs_Device * dev, yaffs_Tnode * tn,
+				      __u32 level, int del0)
+{
+	int i;
+	int hasData;
+
+	if (tn) {
+		hasData = 0;
+
+		for (i = 0; i < YAFFS_NTNODES_INTERNAL; i++) {
+			if (tn->internal[i] && level > 0) {
+				tn->internal[i] =
+				    yaffs_PruneWorker(dev, tn->internal[i],
+						      level - 1,
+						      (i == 0) ? del0 : 1);
+			}
+
+			if (tn->internal[i]) {
+				hasData++;
+			}
+		}
+
+		if (hasData == 0 && del0) {
+			/* Free and return NULL */
+
+			yaffs_FreeTnode(dev, tn);
+			tn = NULL;
+		}
+
+	}
+
+	return tn;
+
+}
+
+static int yaffs_PruneFileStructure(yaffs_Device * dev,
+				    yaffs_FileStructure * fStruct)
+{
+	int i;
+	int hasData;
+	int done = 0;
+	yaffs_Tnode *tn;
+
+	if (fStruct->topLevel > 0) {
+		fStruct->top =
+		    yaffs_PruneWorker(dev, fStruct->top, fStruct->topLevel, 0);
+
+		/* Now we have a tree with all the non-zero branches NULL but the height
+		 * is the same as it was.
+		 * Let's see if we can trim internal tnodes to shorten the tree.
+		 * We can do this if only the 0th element in the tnode is in use
+		 * (ie all the non-zero are NULL)
+		 */
+
+		while (fStruct->topLevel && !done) {
+			tn = fStruct->top;
+
+			hasData = 0;
+			for (i = 1; i < YAFFS_NTNODES_INTERNAL; i++) {
+				if (tn->internal[i]) {
+					hasData++;
+				}
+			}
+
+			if (!hasData) {
+				fStruct->top = tn->internal[0];
+				fStruct->topLevel--;
+				yaffs_FreeTnode(dev, tn);
+			} else {
+				done = 1;
+			}
+		}
+	}
+
+	return YAFFS_OK;
+}
+
+/*-------------------- End of File Structure functions.-------------------*/
+
+/* yaffs_CreateFreeObjects creates a bunch more objects and
+ * adds them to the object free list.
+ */
+static int yaffs_CreateFreeObjects(yaffs_Device * dev, int nObjects)
+{
+	int i;
+	yaffs_Object *newObjects;
+	yaffs_ObjectList *list;
+
+	if (nObjects < 1)
+		return YAFFS_OK;
+
+	/* make these things */
+	newObjects = YMALLOC(nObjects * sizeof(yaffs_Object));
+	list = YMALLOC(sizeof(yaffs_ObjectList));
+
+	if (!newObjects || !list) {
+		if(newObjects)
+			YFREE(newObjects);
+		if(list)
+			YFREE(list);
+		T(YAFFS_TRACE_ALLOCATE,
+		  (TSTR("yaffs: Could not allocate more objects" TENDSTR)));
+		return YAFFS_FAIL;
+	}
+
+	/* Hook them into the free list */
+	for (i = 0; i < nObjects - 1; i++) {
+		newObjects[i].siblings.next =
+		    (struct list_head *)(&newObjects[i + 1]);
+	}
+
+	newObjects[nObjects - 1].siblings.next = (void *)dev->freeObjects;
+	dev->freeObjects = newObjects;
+	dev->nFreeObjects += nObjects;
+	dev->nObjectsCreated += nObjects;
+
+	/* Now add this bunch of Objects to a list for freeing up. */
+
+	list->objects = newObjects;
+	list->next = dev->allocatedObjectList;
+	dev->allocatedObjectList = list;
+
+	return YAFFS_OK;
+}
+
+
+/* AllocateEmptyObject gets us a clean Object. Tries to make allocate more if we run out */
+static yaffs_Object *yaffs_AllocateEmptyObject(yaffs_Device * dev)
+{
+	yaffs_Object *tn = NULL;
+
+	/* If there are none left make more */
+	if (!dev->freeObjects) {
+		yaffs_CreateFreeObjects(dev, YAFFS_ALLOCATION_NOBJECTS);
+	}
+
+	if (dev->freeObjects) {
+		tn = dev->freeObjects;
+		dev->freeObjects =
+		    (yaffs_Object *) (dev->freeObjects->siblings.next);
+		dev->nFreeObjects--;
+
+		/* Now sweeten it up... */
+
+		memset(tn, 0, sizeof(yaffs_Object));
+		tn->myDev = dev;
+		tn->chunkId = -1;
+		tn->variantType = YAFFS_OBJECT_TYPE_UNKNOWN;
+		INIT_LIST_HEAD(&(tn->hardLinks));
+		INIT_LIST_HEAD(&(tn->hashLink));
+		INIT_LIST_HEAD(&tn->siblings);
+
+		/* Add it to the lost and found directory.
+		 * NB Can't put root or lostNFound in lostNFound so
+		 * check if lostNFound exists first
+		 */
+		if (dev->lostNFoundDir) {
+			yaffs_AddObjectToDirectory(dev->lostNFoundDir, tn);
+		}
+	}
+
+	return tn;
+}
+
+static yaffs_Object *yaffs_CreateFakeDirectory(yaffs_Device * dev, int number,
+					       __u32 mode)
+{
+
+	yaffs_Object *obj =
+	    yaffs_CreateNewObject(dev, number, YAFFS_OBJECT_TYPE_DIRECTORY);
+	if (obj) {
+		obj->fake = 1;		/* it is fake so it has no NAND presence... */
+		obj->renameAllowed = 0;	/* ... and we're not allowed to rename it... */
+		obj->unlinkAllowed = 0;	/* ... or unlink it */
+		obj->deleted = 0;
+		obj->unlinked = 0;
+		obj->yst_mode = mode;
+		obj->myDev = dev;
+		obj->chunkId = 0;	/* Not a valid chunk. */
+	}
+
+	return obj;
+
+}
+
+static void yaffs_UnhashObject(yaffs_Object * tn)
+{
+	int bucket;
+	yaffs_Device *dev = tn->myDev;
+
+	/* If it is still linked into the bucket list, free from the list */
+	if (!list_empty(&tn->hashLink)) {
+		list_del_init(&tn->hashLink);
+		bucket = yaffs_HashFunction(tn->objectId);
+		dev->objectBucket[bucket].count--;
+	}
+
+}
+
+/*  FreeObject frees up a Object and puts it back on the free list */
+static void yaffs_FreeObject(yaffs_Object * tn)
+{
+
+	yaffs_Device *dev = tn->myDev;
+
+#ifdef  __KERNEL__
+	if (tn->myInode) {
+		/* We're still hooked up to a cached inode.
+		 * Don't delete now, but mark for later deletion
+		 */
+		tn->deferedFree = 1;
+		return;
+	}
+#endif
+
+	yaffs_UnhashObject(tn);
+
+	/* Link into the free list. */
+	tn->siblings.next = (struct list_head *)(dev->freeObjects);
+	dev->freeObjects = tn;
+	dev->nFreeObjects++;
+}
+
+#ifdef __KERNEL__
+
+void yaffs_HandleDeferedFree(yaffs_Object * obj)
+{
+	if (obj->deferedFree) {
+		yaffs_FreeObject(obj);
+	}
+}
+
+#endif
+
+static void yaffs_DeinitialiseObjects(yaffs_Device * dev)
+{
+	/* Free the list of allocated Objects */
+
+	yaffs_ObjectList *tmp;
+
+	while (dev->allocatedObjectList) {
+		tmp = dev->allocatedObjectList->next;
+		YFREE(dev->allocatedObjectList->objects);
+		YFREE(dev->allocatedObjectList);
+
+		dev->allocatedObjectList = tmp;
+	}
+
+	dev->freeObjects = NULL;
+	dev->nFreeObjects = 0;
+}
+
+static void yaffs_InitialiseObjects(yaffs_Device * dev)
+{
+	int i;
+
+	dev->allocatedObjectList = NULL;
+	dev->freeObjects = NULL;
+	dev->nFreeObjects = 0;
+
+	for (i = 0; i < YAFFS_NOBJECT_BUCKETS; i++) {
+		INIT_LIST_HEAD(&dev->objectBucket[i].list);
+		dev->objectBucket[i].count = 0;
+	}
+
+}
+
+static int yaffs_FindNiceObjectBucket(yaffs_Device * dev)
+{
+	static int x = 0;
+	int i;
+	int l = 999;
+	int lowest = 999999;
+
+	/* First let's see if we can find one that's empty. */
+
+	for (i = 0; i < 10 && lowest > 0; i++) {
+		x++;
+		x %= YAFFS_NOBJECT_BUCKETS;
+		if (dev->objectBucket[x].count < lowest) {
+			lowest = dev->objectBucket[x].count;
+			l = x;
+		}
+
+	}
+
+	/* If we didn't find an empty list, then try
+	 * looking a bit further for a short one
+	 */
+
+	for (i = 0; i < 10 && lowest > 3; i++) {
+		x++;
+		x %= YAFFS_NOBJECT_BUCKETS;
+		if (dev->objectBucket[x].count < lowest) {
+			lowest = dev->objectBucket[x].count;
+			l = x;
+		}
+
+	}
+
+	return l;
+}
+
+static int yaffs_CreateNewObjectNumber(yaffs_Device * dev)
+{
+	int bucket = yaffs_FindNiceObjectBucket(dev);
+
+	/* Now find an object value that has not already been taken
+	 * by scanning the list.
+	 */
+
+	int found = 0;
+	struct list_head *i;
+
+	__u32 n = (__u32) bucket;
+
+	/* yaffs_CheckObjectHashSanity();  */
+
+	while (!found) {
+		found = 1;
+		n += YAFFS_NOBJECT_BUCKETS;
+		if (1 || dev->objectBucket[bucket].count > 0) {
+			list_for_each(i, &dev->objectBucket[bucket].list) {
+				/* If there is already one in the list */
+				if (i
+				    && list_entry(i, yaffs_Object,
+						  hashLink)->objectId == n) {
+					found = 0;
+				}
+			}
+		}
+	}
+
+
+	return n;
+}
+
+static void yaffs_HashObject(yaffs_Object * in)
+{
+	int bucket = yaffs_HashFunction(in->objectId);
+	yaffs_Device *dev = in->myDev;
+
+	list_add(&in->hashLink, &dev->objectBucket[bucket].list);
+	dev->objectBucket[bucket].count++;
+
+}
+
+yaffs_Object *yaffs_FindObjectByNumber(yaffs_Device * dev, __u32 number)
+{
+	int bucket = yaffs_HashFunction(number);
+	struct list_head *i;
+	yaffs_Object *in;
+
+	list_for_each(i, &dev->objectBucket[bucket].list) {
+		/* Look if it is in the list */
+		if (i) {
+			in = list_entry(i, yaffs_Object, hashLink);
+			if (in->objectId == number) {
+#ifdef __KERNEL__
+				/* Don't tell the VFS about this one if it is defered free */
+				if (in->deferedFree)
+					return NULL;
+#endif
+
+				return in;
+			}
+		}
+	}
+
+	return NULL;
+}
+
+yaffs_Object *yaffs_CreateNewObject(yaffs_Device * dev, int number,
+				    yaffs_ObjectType type)
+{
+
+	yaffs_Object *theObject;
+	yaffs_Tnode *tn;
+
+	if (number < 0) {
+		number = yaffs_CreateNewObjectNumber(dev);
+	}
+
+	theObject = yaffs_AllocateEmptyObject(dev);
+	if(!theObject)
+		return NULL;
+
+	if(type == YAFFS_OBJECT_TYPE_FILE){
+		tn = yaffs_GetTnode(dev);
+		if(!tn){
+			yaffs_FreeObject(theObject);
+			return NULL;
+		}
+	}
+
+
+
+	if (theObject) {
+		theObject->fake = 0;
+		theObject->renameAllowed = 1;
+		theObject->unlinkAllowed = 1;
+		theObject->objectId = number;
+		yaffs_HashObject(theObject);
+		theObject->variantType = type;
+#ifdef CONFIG_YAFFS_WINCE
+		yfsd_WinFileTimeNow(theObject->win_atime);
+		theObject->win_ctime[0] = theObject->win_mtime[0] =
+		    theObject->win_atime[0];
+		theObject->win_ctime[1] = theObject->win_mtime[1] =
+		    theObject->win_atime[1];
+
+#else
+
+		theObject->yst_atime = theObject->yst_mtime =
+		    theObject->yst_ctime = Y_CURRENT_TIME;
+#endif
+		switch (type) {
+		case YAFFS_OBJECT_TYPE_FILE:
+			theObject->variant.fileVariant.fileSize = 0;
+			theObject->variant.fileVariant.scannedFileSize = 0;
+			theObject->variant.fileVariant.shrinkSize = 0xFFFFFFFF;	/* max __u32 */
+			theObject->variant.fileVariant.topLevel = 0;
+			theObject->variant.fileVariant.top = tn;
+			break;
+		case YAFFS_OBJECT_TYPE_DIRECTORY:
+			INIT_LIST_HEAD(&theObject->variant.directoryVariant.
+				       children);
+			break;
+		case YAFFS_OBJECT_TYPE_SYMLINK:
+		case YAFFS_OBJECT_TYPE_HARDLINK:
+		case YAFFS_OBJECT_TYPE_SPECIAL:
+			/* No action required */
+			break;
+		case YAFFS_OBJECT_TYPE_UNKNOWN:
+			/* todo this should not happen */
+			break;
+		}
+	}
+
+	return theObject;
+}
+
+static yaffs_Object *yaffs_FindOrCreateObjectByNumber(yaffs_Device * dev,
+						      int number,
+						      yaffs_ObjectType type)
+{
+	yaffs_Object *theObject = NULL;
+
+	if (number > 0) {
+		theObject = yaffs_FindObjectByNumber(dev, number);
+	}
+
+	if (!theObject) {
+		theObject = yaffs_CreateNewObject(dev, number, type);
+	}
+
+	return theObject;
+
+}
+
+
+static YCHAR *yaffs_CloneString(const YCHAR * str)
+{
+	YCHAR *newStr = NULL;
+
+	if (str && *str) {
+		newStr = YMALLOC((yaffs_strlen(str) + 1) * sizeof(YCHAR));
+		if(newStr)
+			yaffs_strcpy(newStr, str);
+	}
+
+	return newStr;
+
+}
+
+/*
+ * Mknod (create) a new object.
+ * equivalentObject only has meaning for a hard link;
+ * aliasString only has meaning for a sumlink.
+ * rdev only has meaning for devices (a subset of special objects)
+ */
+
+static yaffs_Object *yaffs_MknodObject(yaffs_ObjectType type,
+				       yaffs_Object * parent,
+				       const YCHAR * name,
+				       __u32 mode,
+				       __u32 uid,
+				       __u32 gid,
+				       yaffs_Object * equivalentObject,
+				       const YCHAR * aliasString, __u32 rdev)
+{
+	yaffs_Object *in;
+	YCHAR *str;
+
+	yaffs_Device *dev = parent->myDev;
+
+	/* Check if the entry exists. If it does then fail the call since we don't want a dup.*/
+	if (yaffs_FindObjectByName(parent, name)) {
+		return NULL;
+	}
+
+	in = yaffs_CreateNewObject(dev, -1, type);
+
+	if(type == YAFFS_OBJECT_TYPE_SYMLINK){
+		str = yaffs_CloneString(aliasString);
+		if(!str){
+			yaffs_FreeObject(in);
+			return NULL;
+		}
+	}
+
+
+
+	if (in) {
+		in->chunkId = -1;
+		in->valid = 1;
+		in->variantType = type;
+
+		in->yst_mode = mode;
+
+#ifdef CONFIG_YAFFS_WINCE
+		yfsd_WinFileTimeNow(in->win_atime);
+		in->win_ctime[0] = in->win_mtime[0] = in->win_atime[0];
+		in->win_ctime[1] = in->win_mtime[1] = in->win_atime[1];
+
+#else
+		in->yst_atime = in->yst_mtime = in->yst_ctime = Y_CURRENT_TIME;
+
+		in->yst_rdev = rdev;
+		in->yst_uid = uid;
+		in->yst_gid = gid;
+#endif
+		in->nDataChunks = 0;
+
+		yaffs_SetObjectName(in, name);
+		in->dirty = 1;
+
+		yaffs_AddObjectToDirectory(parent, in);
+
+		in->myDev = parent->myDev;
+
+		switch (type) {
+		case YAFFS_OBJECT_TYPE_SYMLINK:
+			in->variant.symLinkVariant.alias = str;
+			break;
+		case YAFFS_OBJECT_TYPE_HARDLINK:
+			in->variant.hardLinkVariant.equivalentObject =
+			    equivalentObject;
+			in->variant.hardLinkVariant.equivalentObjectId =
+			    equivalentObject->objectId;
+			list_add(&in->hardLinks, &equivalentObject->hardLinks);
+			break;
+		case YAFFS_OBJECT_TYPE_FILE:
+		case YAFFS_OBJECT_TYPE_DIRECTORY:
+		case YAFFS_OBJECT_TYPE_SPECIAL:
+		case YAFFS_OBJECT_TYPE_UNKNOWN:
+			/* do nothing */
+			break;
+		}
+
+		if (yaffs_UpdateObjectHeader(in, name, 0, 0, 0) < 0) {
+			/* Could not create the object header, fail the creation */
+			yaffs_DestroyObject(in);
+			in = NULL;
+		}
+
+	}
+
+	return in;
+}
+
+yaffs_Object *yaffs_MknodFile(yaffs_Object * parent, const YCHAR * name,
+			      __u32 mode, __u32 uid, __u32 gid)
+{
+	return yaffs_MknodObject(YAFFS_OBJECT_TYPE_FILE, parent, name, mode,
+				 uid, gid, NULL, NULL, 0);
+}
+
+yaffs_Object *yaffs_MknodDirectory(yaffs_Object * parent, const YCHAR * name,
+				   __u32 mode, __u32 uid, __u32 gid)
+{
+	return yaffs_MknodObject(YAFFS_OBJECT_TYPE_DIRECTORY, parent, name,
+				 mode, uid, gid, NULL, NULL, 0);
+}
+
+yaffs_Object *yaffs_MknodSpecial(yaffs_Object * parent, const YCHAR * name,
+				 __u32 mode, __u32 uid, __u32 gid, __u32 rdev)
+{
+	return yaffs_MknodObject(YAFFS_OBJECT_TYPE_SPECIAL, parent, name, mode,
+				 uid, gid, NULL, NULL, rdev);
+}
+
+yaffs_Object *yaffs_MknodSymLink(yaffs_Object * parent, const YCHAR * name,
+				 __u32 mode, __u32 uid, __u32 gid,
+				 const YCHAR * alias)
+{
+	return yaffs_MknodObject(YAFFS_OBJECT_TYPE_SYMLINK, parent, name, mode,
+				 uid, gid, NULL, alias, 0);
+}
+
+/* yaffs_Link returns the object id of the equivalent object.*/
+yaffs_Object *yaffs_Link(yaffs_Object * parent, const YCHAR * name,
+			 yaffs_Object * equivalentObject)
+{
+	/* Get the real object in case we were fed a hard link as an equivalent object */
+	equivalentObject = yaffs_GetEquivalentObject(equivalentObject);
+
+	if (yaffs_MknodObject
+	    (YAFFS_OBJECT_TYPE_HARDLINK, parent, name, 0, 0, 0,
+	     equivalentObject, NULL, 0)) {
+		return equivalentObject;
+	} else {
+		return NULL;
+	}
+
+}
+
+static int yaffs_ChangeObjectName(yaffs_Object * obj, yaffs_Object * newDir,
+				  const YCHAR * newName, int force, int shadows)
+{
+	int unlinkOp;
+	int deleteOp;
+
+	yaffs_Object *existingTarget;
+
+	if (newDir == NULL) {
+		newDir = obj->parent;	/* use the old directory */
+	}
+
+	if (newDir->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+		T(YAFFS_TRACE_ALWAYS,
+		  (TSTR
+		   ("tragendy: yaffs_ChangeObjectName: newDir is not a directory"
+		    TENDSTR)));
+		YBUG();
+	}
+
+	/* TODO: Do we need this different handling for YAFFS2 and YAFFS1?? */
+	if (obj->myDev->isYaffs2) {
+		unlinkOp = (newDir == obj->myDev->unlinkedDir);
+	} else {
+		unlinkOp = (newDir == obj->myDev->unlinkedDir
+			    && obj->variantType == YAFFS_OBJECT_TYPE_FILE);
+	}
+
+	deleteOp = (newDir == obj->myDev->deletedDir);
+
+	existingTarget = yaffs_FindObjectByName(newDir, newName);
+
+	/* If the object is a file going into the unlinked directory,
+	 *   then it is OK to just stuff it in since duplicate names are allowed.
+	 *   else only proceed if the new name does not exist and if we're putting
+	 *   it into a directory.
+	 */
+	if ((unlinkOp ||
+	     deleteOp ||
+	     force ||
+	     (shadows > 0) ||
+	     !existingTarget) &&
+	    newDir->variantType == YAFFS_OBJECT_TYPE_DIRECTORY) {
+		yaffs_SetObjectName(obj, newName);
+		obj->dirty = 1;
+
+		yaffs_AddObjectToDirectory(newDir, obj);
+
+		if (unlinkOp)
+			obj->unlinked = 1;
+
+		/* If it is a deletion then we mark it as a shrink for gc purposes. */
+		if (yaffs_UpdateObjectHeader(obj, newName, 0, deleteOp, shadows)>= 0)
+			return YAFFS_OK;
+	}
+
+	return YAFFS_FAIL;
+}
+
+int yaffs_RenameObject(yaffs_Object * oldDir, const YCHAR * oldName,
+		       yaffs_Object * newDir, const YCHAR * newName)
+{
+	yaffs_Object *obj;
+	yaffs_Object *existingTarget;
+	int force = 0;
+
+#ifdef CONFIG_YAFFS_CASE_INSENSITIVE
+	/* Special case for case insemsitive systems (eg. WinCE).
+	 * While look-up is case insensitive, the name isn't.
+	 * Therefore we might want to change x.txt to X.txt
+	*/
+	if (oldDir == newDir && yaffs_strcmp(oldName, newName) == 0) {
+		force = 1;
+	}
+#endif
+
+	obj = yaffs_FindObjectByName(oldDir, oldName);
+	/* Check new name to long. */
+	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK &&
+	    yaffs_strlen(newName) > YAFFS_MAX_ALIAS_LENGTH)
+	  /* ENAMETOOLONG */
+	  return YAFFS_FAIL;
+	else if (obj->variantType != YAFFS_OBJECT_TYPE_SYMLINK &&
+		 yaffs_strlen(newName) > YAFFS_MAX_NAME_LENGTH)
+	  /* ENAMETOOLONG */
+	  return YAFFS_FAIL;
+
+	if (obj && obj->renameAllowed) {
+
+		/* Now do the handling for an existing target, if there is one */
+
+		existingTarget = yaffs_FindObjectByName(newDir, newName);
+		if (existingTarget &&
+		    existingTarget->variantType == YAFFS_OBJECT_TYPE_DIRECTORY &&
+		    !list_empty(&existingTarget->variant.directoryVariant.children)) {
+			/* There is a target that is a non-empty directory, so we fail */
+			return YAFFS_FAIL;	/* EEXIST or ENOTEMPTY */
+		} else if (existingTarget && existingTarget != obj) {
+			/* Nuke the target first, using shadowing,
+			 * but only if it isn't the same object
+			 */
+			yaffs_ChangeObjectName(obj, newDir, newName, force,
+					       existingTarget->objectId);
+			yaffs_UnlinkObject(existingTarget);
+		}
+
+		return yaffs_ChangeObjectName(obj, newDir, newName, 1, 0);
+	}
+	return YAFFS_FAIL;
+}
+
+/*------------------------- Block Management and Page Allocation ----------------*/
+
+static int yaffs_InitialiseBlocks(yaffs_Device * dev)
+{
+	int nBlocks = dev->internalEndBlock - dev->internalStartBlock + 1;
+
+	dev->blockInfo = NULL;
+	dev->chunkBits = NULL;
+
+	dev->allocationBlock = -1;	/* force it to get a new one */
+
+	/* If the first allocation strategy fails, thry the alternate one */
+	dev->blockInfo = YMALLOC(nBlocks * sizeof(yaffs_BlockInfo));
+	if(!dev->blockInfo){
+		dev->blockInfo = YMALLOC_ALT(nBlocks * sizeof(yaffs_BlockInfo));
+		dev->blockInfoAlt = 1;
+	}
+	else
+		dev->blockInfoAlt = 0;
+
+	if(dev->blockInfo){
+
+		/* Set up dynamic blockinfo stuff. */
+		dev->chunkBitmapStride = (dev->nChunksPerBlock + 7) / 8; /* round up bytes */
+		dev->chunkBits = YMALLOC(dev->chunkBitmapStride * nBlocks);
+		if(!dev->chunkBits){
+			dev->chunkBits = YMALLOC_ALT(dev->chunkBitmapStride * nBlocks);
+			dev->chunkBitsAlt = 1;
+		}
+		else
+			dev->chunkBitsAlt = 0;
+	}
+
+	if (dev->blockInfo && dev->chunkBits) {
+		memset(dev->blockInfo, 0, nBlocks * sizeof(yaffs_BlockInfo));
+		memset(dev->chunkBits, 0, dev->chunkBitmapStride * nBlocks);
+		return YAFFS_OK;
+	}
+
+	return YAFFS_FAIL;
+
+}
+
+static void yaffs_DeinitialiseBlocks(yaffs_Device * dev)
+{
+	if(dev->blockInfoAlt && dev->blockInfo)
+		YFREE_ALT(dev->blockInfo);
+	else if(dev->blockInfo)
+		YFREE(dev->blockInfo);
+
+	dev->blockInfoAlt = 0;
+
+	dev->blockInfo = NULL;
+
+	if(dev->chunkBitsAlt && dev->chunkBits)
+		YFREE_ALT(dev->chunkBits);
+	else if(dev->chunkBits)
+		YFREE(dev->chunkBits);
+	dev->chunkBitsAlt = 0;
+	dev->chunkBits = NULL;
+}
+
+static int yaffs_BlockNotDisqualifiedFromGC(yaffs_Device * dev,
+					    yaffs_BlockInfo * bi)
+{
+	int i;
+	__u32 seq;
+	yaffs_BlockInfo *b;
+
+	if (!dev->isYaffs2)
+		return 1;	/* disqualification only applies to yaffs2. */
+
+	if (!bi->hasShrinkHeader)
+		return 1;	/* can gc */
+
+	/* Find the oldest dirty sequence number if we don't know it and save it
+	 * so we don't have to keep recomputing it.
+	 */
+	if (!dev->oldestDirtySequence) {
+		seq = dev->sequenceNumber;
+
+		for (i = dev->internalStartBlock; i <= dev->internalEndBlock;
+		     i++) {
+			b = yaffs_GetBlockInfo(dev, i);
+			if (b->blockState == YAFFS_BLOCK_STATE_FULL &&
+			    (b->pagesInUse - b->softDeletions) <
+			    dev->nChunksPerBlock && b->sequenceNumber < seq) {
+				seq = b->sequenceNumber;
+			}
+		}
+		dev->oldestDirtySequence = seq;
+	}
+
+	/* Can't do gc of this block if there are any blocks older than this one that have
+	 * discarded pages.
+	 */
+	return (bi->sequenceNumber <= dev->oldestDirtySequence);
+
+}
+
+/* FindDiretiestBlock is used to select the dirtiest block (or close enough)
+ * for garbage collection.
+ */
+
+static int yaffs_FindBlockForGarbageCollection(yaffs_Device * dev,
+					       int aggressive)
+{
+
+	int b = dev->currentDirtyChecker;
+
+	int i;
+	int iterations;
+	int dirtiest = -1;
+	int pagesInUse = 0;
+	int prioritised=0;
+	yaffs_BlockInfo *bi;
+	int pendingPrioritisedExist = 0;
+
+	/* First let's see if we need to grab a prioritised block */
+	if(dev->hasPendingPrioritisedGCs){
+		for(i = dev->internalStartBlock; i < dev->internalEndBlock && !prioritised; i++){
+
+			bi = yaffs_GetBlockInfo(dev, i);
+			//yaffs_VerifyBlock(dev,bi,i);
+
+			if(bi->gcPrioritise) {
+				pendingPrioritisedExist = 1;
+				if(bi->blockState == YAFFS_BLOCK_STATE_FULL &&
+				   yaffs_BlockNotDisqualifiedFromGC(dev, bi)){
+					pagesInUse = (bi->pagesInUse - bi->softDeletions);
+					dirtiest = i;
+					prioritised = 1;
+					aggressive = 1; /* Fool the non-aggressive skip logiv below */
+				}
+			}
+		}
+
+		if(!pendingPrioritisedExist) /* None found, so we can clear this */
+			dev->hasPendingPrioritisedGCs = 0;
+	}
+
+	/* If we're doing aggressive GC then we are happy to take a less-dirty block, and
+	 * search harder.
+	 * else (we're doing a leasurely gc), then we only bother to do this if the
+	 * block has only a few pages in use.
+	 */
+
+	dev->nonAggressiveSkip--;
+
+	if (!aggressive && (dev->nonAggressiveSkip > 0)) {
+		return -1;
+	}
+
+	if(!prioritised)
+		pagesInUse =
+	    		(aggressive) ? dev->nChunksPerBlock : YAFFS_PASSIVE_GC_CHUNKS + 1;
+
+	if (aggressive) {
+		iterations =
+		    dev->internalEndBlock - dev->internalStartBlock + 1;
+	} else {
+		iterations =
+		    dev->internalEndBlock - dev->internalStartBlock + 1;
+		iterations = iterations / 16;
+		if (iterations > 200) {
+			iterations = 200;
+		}
+	}
+
+	for (i = 0; i <= iterations && pagesInUse > 0 && !prioritised; i++) {
+		b++;
+		if (b < dev->internalStartBlock || b > dev->internalEndBlock) {
+			b = dev->internalStartBlock;
+		}
+
+		if (b < dev->internalStartBlock || b > dev->internalEndBlock) {
+			T(YAFFS_TRACE_ERROR,
+			  (TSTR("**>> Block %d is not valid" TENDSTR), b));
+			YBUG();
+		}
+
+		bi = yaffs_GetBlockInfo(dev, b);
+
+#if 0
+		if (bi->blockState == YAFFS_BLOCK_STATE_CHECKPOINT) {
+			dirtiest = b;
+			pagesInUse = 0;
+		}
+		else
+#endif
+
+		if (bi->blockState == YAFFS_BLOCK_STATE_FULL &&
+		       (bi->pagesInUse - bi->softDeletions) < pagesInUse &&
+		        yaffs_BlockNotDisqualifiedFromGC(dev, bi)) {
+			dirtiest = b;
+			pagesInUse = (bi->pagesInUse - bi->softDeletions);
+		}
+	}
+
+	dev->currentDirtyChecker = b;
+
+	if (dirtiest > 0) {
+		T(YAFFS_TRACE_GC,
+		  (TSTR("GC Selected block %d with %d free, prioritised:%d" TENDSTR), dirtiest,
+		   dev->nChunksPerBlock - pagesInUse,prioritised));
+	}
+
+	dev->oldestDirtySequence = 0;
+
+	if (dirtiest > 0) {
+		dev->nonAggressiveSkip = 4;
+	}
+
+	return dirtiest;
+}
+
+static void yaffs_BlockBecameDirty(yaffs_Device * dev, int blockNo)
+{
+	yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, blockNo);
+
+	int erasedOk = 0;
+
+	/* If the block is still healthy erase it and mark as clean.
+	 * If the block has had a data failure, then retire it.
+	 */
+
+	T(YAFFS_TRACE_GC | YAFFS_TRACE_ERASE,
+		(TSTR("yaffs_BlockBecameDirty block %d state %d %s"TENDSTR),
+		blockNo, bi->blockState, (bi->needsRetiring) ? "needs retiring" : ""));
+
+	bi->blockState = YAFFS_BLOCK_STATE_DIRTY;
+
+	if (!bi->needsRetiring) {
+		yaffs_InvalidateCheckpoint(dev);
+		erasedOk = yaffs_EraseBlockInNAND(dev, blockNo);
+		if (!erasedOk) {
+			dev->nErasureFailures++;
+			T(YAFFS_TRACE_ERROR | YAFFS_TRACE_BAD_BLOCKS,
+			  (TSTR("**>> Erasure failed %d" TENDSTR), blockNo));
+		}
+	}
+
+	if (erasedOk &&
+	    ((yaffs_traceMask & YAFFS_TRACE_ERASE) || !yaffs_SkipVerification(dev))) {
+		int i;
+		for (i = 0; i < dev->nChunksPerBlock; i++) {
+			if (!yaffs_CheckChunkErased
+			    (dev, blockNo * dev->nChunksPerBlock + i)) {
+				T(YAFFS_TRACE_ERROR,
+				  (TSTR
+				   (">>Block %d erasure supposedly OK, but chunk %d not erased"
+				    TENDSTR), blockNo, i));
+			}
+		}
+	}
+
+	if (erasedOk) {
+		/* Clean it up... */
+		bi->blockState = YAFFS_BLOCK_STATE_EMPTY;
+		dev->nErasedBlocks++;
+		bi->pagesInUse = 0;
+		bi->softDeletions = 0;
+		bi->hasShrinkHeader = 0;
+		bi->skipErasedCheck = 1;  /* This is clean, so no need to check */
+		bi->gcPrioritise = 0;
+		yaffs_ClearChunkBits(dev, blockNo);
+
+		T(YAFFS_TRACE_ERASE,
+		  (TSTR("Erased block %d" TENDSTR), blockNo));
+	} else {
+		dev->nFreeChunks -= dev->nChunksPerBlock;	/* We lost a block of free space */
+
+		yaffs_RetireBlock(dev, blockNo);
+		T(YAFFS_TRACE_ERROR | YAFFS_TRACE_BAD_BLOCKS,
+		  (TSTR("**>> Block %d retired" TENDSTR), blockNo));
+	}
+}
+
+static int yaffs_FindBlockForAllocation(yaffs_Device * dev)
+{
+	int i;
+
+	yaffs_BlockInfo *bi;
+
+	if (dev->nErasedBlocks < 1) {
+		/* Hoosterman we've got a problem.
+		 * Can't get space to gc
+		 */
+		T(YAFFS_TRACE_ERROR,
+		  (TSTR("yaffs tragedy: no more eraased blocks" TENDSTR)));
+
+		return -1;
+	}
+
+	/* Find an empty block. */
+
+	for (i = dev->internalStartBlock; i <= dev->internalEndBlock; i++) {
+		dev->allocationBlockFinder++;
+		if (dev->allocationBlockFinder < dev->internalStartBlock
+		    || dev->allocationBlockFinder > dev->internalEndBlock) {
+			dev->allocationBlockFinder = dev->internalStartBlock;
+		}
+
+		bi = yaffs_GetBlockInfo(dev, dev->allocationBlockFinder);
+
+		if (bi->blockState == YAFFS_BLOCK_STATE_EMPTY) {
+			bi->blockState = YAFFS_BLOCK_STATE_ALLOCATING;
+			dev->sequenceNumber++;
+			bi->sequenceNumber = dev->sequenceNumber;
+			dev->nErasedBlocks--;
+			T(YAFFS_TRACE_ALLOCATE,
+			  (TSTR("Allocated block %d, seq  %d, %d left" TENDSTR),
+			   dev->allocationBlockFinder, dev->sequenceNumber,
+			   dev->nErasedBlocks));
+			return dev->allocationBlockFinder;
+		}
+	}
+
+	T(YAFFS_TRACE_ALWAYS,
+	  (TSTR
+	   ("yaffs tragedy: no more eraased blocks, but there should have been %d"
+	    TENDSTR), dev->nErasedBlocks));
+
+	return -1;
+}
+
+
+// Check if there's space to allocate...
+// Thinks.... do we need top make this ths same as yaffs_GetFreeChunks()?
+static int yaffs_CheckSpaceForAllocation(yaffs_Device * dev)
+{
+	int reservedChunks;
+	int reservedBlocks = dev->nReservedBlocks;
+	int checkpointBlocks;
+
+	checkpointBlocks =  dev->nCheckpointReservedBlocks - dev->blocksInCheckpoint;
+	if(checkpointBlocks < 0)
+		checkpointBlocks = 0;
+
+	reservedChunks = ((reservedBlocks + checkpointBlocks) * dev->nChunksPerBlock);
+
+	return (dev->nFreeChunks > reservedChunks);
+}
+
+static int yaffs_AllocateChunk(yaffs_Device * dev, int useReserve, yaffs_BlockInfo **blockUsedPtr)
+{
+	int retVal;
+	yaffs_BlockInfo *bi;
+
+	if (dev->allocationBlock < 0) {
+		/* Get next block to allocate off */
+		dev->allocationBlock = yaffs_FindBlockForAllocation(dev);
+		dev->allocationPage = 0;
+	}
+
+	if (!useReserve && !yaffs_CheckSpaceForAllocation(dev)) {
+		/* Not enough space to allocate unless we're allowed to use the reserve. */
+		return -1;
+	}
+
+	if (dev->nErasedBlocks < dev->nReservedBlocks
+	    && dev->allocationPage == 0) {
+		T(YAFFS_TRACE_ALLOCATE, (TSTR("Allocating reserve" TENDSTR)));
+	}
+
+	/* Next page please.... */
+	if (dev->allocationBlock >= 0) {
+		bi = yaffs_GetBlockInfo(dev, dev->allocationBlock);
+
+		retVal = (dev->allocationBlock * dev->nChunksPerBlock) +
+		    dev->allocationPage;
+		bi->pagesInUse++;
+		yaffs_SetChunkBit(dev, dev->allocationBlock,
+				  dev->allocationPage);
+
+		dev->allocationPage++;
+
+		dev->nFreeChunks--;
+
+		/* If the block is full set the state to full */
+		if (dev->allocationPage >= dev->nChunksPerBlock) {
+			bi->blockState = YAFFS_BLOCK_STATE_FULL;
+			dev->allocationBlock = -1;
+		}
+
+		if(blockUsedPtr)
+			*blockUsedPtr = bi;
+
+		return retVal;
+	}
+
+	T(YAFFS_TRACE_ERROR,
+	  (TSTR("!!!!!!!!! Allocator out !!!!!!!!!!!!!!!!!" TENDSTR)));
+
+	return -1;
+}
+
+static int yaffs_GetErasedChunks(yaffs_Device * dev)
+{
+	int n;
+
+	n = dev->nErasedBlocks * dev->nChunksPerBlock;
+
+	if (dev->allocationBlock > 0) {
+		n += (dev->nChunksPerBlock - dev->allocationPage);
+	}
+
+	return n;
+
+}
+
+static int yaffs_GarbageCollectBlock(yaffs_Device * dev, int block)
+{
+	int oldChunk;
+	int newChunk;
+	int chunkInBlock;
+	int markNAND;
+	int retVal = YAFFS_OK;
+	int cleanups = 0;
+	int i;
+	int isCheckpointBlock;
+	int matchingChunk;
+
+	int chunksBefore = yaffs_GetErasedChunks(dev);
+	int chunksAfter;
+
+	yaffs_ExtendedTags tags;
+
+	yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, block);
+
+	yaffs_Object *object;
+
+	isCheckpointBlock = (bi->blockState == YAFFS_BLOCK_STATE_CHECKPOINT);
+
+	bi->blockState = YAFFS_BLOCK_STATE_COLLECTING;
+
+	T(YAFFS_TRACE_TRACING,
+	  (TSTR("Collecting block %d, in use %d, shrink %d, " TENDSTR), block,
+	   bi->pagesInUse, bi->hasShrinkHeader));
+
+	/*yaffs_VerifyFreeChunks(dev); */
+
+	bi->hasShrinkHeader = 0;	/* clear the flag so that the block can erase */
+
+	/* Take off the number of soft deleted entries because
+	 * they're going to get really deleted during GC.
+	 */
+	dev->nFreeChunks -= bi->softDeletions;
+
+	dev->isDoingGC = 1;
+
+	if (isCheckpointBlock ||
+	    !yaffs_StillSomeChunkBits(dev, block)) {
+		T(YAFFS_TRACE_TRACING,
+		  (TSTR
+		   ("Collecting block %d that has no chunks in use" TENDSTR),
+		   block));
+		yaffs_BlockBecameDirty(dev, block);
+	} else {
+
+		__u8 *buffer = yaffs_GetTempBuffer(dev, __LINE__);
+
+		yaffs_VerifyBlock(dev,bi,block);
+
+		for (chunkInBlock = 0, oldChunk = block * dev->nChunksPerBlock;
+		     chunkInBlock < dev->nChunksPerBlock
+		     && yaffs_StillSomeChunkBits(dev, block);
+		     chunkInBlock++, oldChunk++) {
+			if (yaffs_CheckChunkBit(dev, block, chunkInBlock)) {
+
+				/* This page is in use and might need to be copied off */
+
+				markNAND = 1;
+
+				yaffs_InitialiseTags(&tags);
+
+				yaffs_ReadChunkWithTagsFromNAND(dev, oldChunk,
+								buffer, &tags);
+
+				object =
+				    yaffs_FindObjectByNumber(dev,
+							     tags.objectId);
+
+				T(YAFFS_TRACE_GC_DETAIL,
+				  (TSTR
+				   ("Collecting page %d, %d %d %d " TENDSTR),
+				   chunkInBlock, tags.objectId, tags.chunkId,
+				   tags.byteCount));
+
+				if(object && !yaffs_SkipVerification(dev)){
+					if(tags.chunkId == 0)
+						matchingChunk = object->chunkId;
+					else if(object->softDeleted)
+						matchingChunk = oldChunk; /* Defeat the test */
+					else
+						matchingChunk = yaffs_FindChunkInFile(object,tags.chunkId,NULL);
+
+					if(oldChunk != matchingChunk)
+						T(YAFFS_TRACE_ERROR,
+						  (TSTR("gc: page in gc mismatch: %d %d %d %d"TENDSTR),
+						  oldChunk,matchingChunk,tags.objectId, tags.chunkId));
+
+				}
+
+				if (!object) {
+					T(YAFFS_TRACE_ERROR,
+					  (TSTR
+					   ("page %d in gc has no object: %d %d %d "
+					    TENDSTR), oldChunk,
+					    tags.objectId, tags.chunkId, tags.byteCount));
+				}
+
+				if (object && object->deleted
+				    && tags.chunkId != 0) {
+					/* Data chunk in a deleted file, throw it away
+					 * It's a soft deleted data chunk,
+					 * No need to copy this, just forget about it and
+					 * fix up the object.
+					 */
+
+					object->nDataChunks--;
+
+					if (object->nDataChunks <= 0) {
+						/* remeber to clean up the object */
+						dev->gcCleanupList[cleanups] =
+						    tags.objectId;
+						cleanups++;
+					}
+					markNAND = 0;
+				} else if (0
+					   /* Todo object && object->deleted && object->nDataChunks == 0 */
+					   ) {
+					/* Deleted object header with no data chunks.
+					 * Can be discarded and the file deleted.
+					 */
+					object->chunkId = 0;
+					yaffs_FreeTnode(object->myDev,
+							object->variant.
+							fileVariant.top);
+					object->variant.fileVariant.top = NULL;
+					yaffs_DoGenericObjectDeletion(object);
+
+				} else if (object) {
+					/* It's either a data chunk in a live file or
+					 * an ObjectHeader, so we're interested in it.
+					 * NB Need to keep the ObjectHeaders of deleted files
+					 * until the whole file has been deleted off
+					 */
+					tags.serialNumber++;
+
+					dev->nGCCopies++;
+
+					if (tags.chunkId == 0) {
+						/* It is an object Id,
+						 * We need to nuke the shrinkheader flags first
+						 * We no longer want the shrinkHeader flag since its work is done
+						 * and if it is left in place it will mess up scanning.
+						 * Also, clear out any shadowing stuff
+						 */
+
+						yaffs_ObjectHeader *oh;
+						oh = (yaffs_ObjectHeader *)buffer;
+						oh->isShrink = 0;
+						oh->shadowsObject = -1;
+						tags.extraShadows = 0;
+						tags.extraIsShrinkHeader = 0;
+
+						yaffs_VerifyObjectHeader(object,oh,&tags,1);
+					}
+
+					newChunk =
+					    yaffs_WriteNewChunkWithTagsToNAND(dev, buffer, &tags, 1);
+
+					if (newChunk < 0) {
+						retVal = YAFFS_FAIL;
+					} else {
+
+						/* Ok, now fix up the Tnodes etc. */
+
+						if (tags.chunkId == 0) {
+							/* It's a header */
+							object->chunkId =  newChunk;
+							object->serial =   tags.serialNumber;
+						} else {
+							/* It's a data chunk */
+							yaffs_PutChunkIntoFile
+							    (object,
+							     tags.chunkId,
+							     newChunk, 0);
+						}
+					}
+				}
+
+				yaffs_DeleteChunk(dev, oldChunk, markNAND, __LINE__);
+
+			}
+		}
+
+		yaffs_ReleaseTempBuffer(dev, buffer, __LINE__);
+
+
+		/* Do any required cleanups */
+		for (i = 0; i < cleanups; i++) {
+			/* Time to delete the file too */
+			object =
+			    yaffs_FindObjectByNumber(dev,
+						     dev->gcCleanupList[i]);
+			if (object) {
+				yaffs_FreeTnode(dev,
+						object->variant.fileVariant.
+						top);
+				object->variant.fileVariant.top = NULL;
+				T(YAFFS_TRACE_GC,
+				  (TSTR
+				   ("yaffs: About to finally delete object %d"
+				    TENDSTR), object->objectId));
+				yaffs_DoGenericObjectDeletion(object);
+				object->myDev->nDeletedFiles--;
+			}
+
+		}
+
+	}
+
+	yaffs_VerifyCollectedBlock(dev,bi,block);
+
+	if (chunksBefore >= (chunksAfter = yaffs_GetErasedChunks(dev))) {
+		T(YAFFS_TRACE_GC,
+		  (TSTR
+		   ("gc did not increase free chunks before %d after %d"
+		    TENDSTR), chunksBefore, chunksAfter));
+	}
+
+	dev->isDoingGC = 0;
+
+	return YAFFS_OK;
+}
+
+/* New garbage collector
+ * If we're very low on erased blocks then we do aggressive garbage collection
+ * otherwise we do "leasurely" garbage collection.
+ * Aggressive gc looks further (whole array) and will accept less dirty blocks.
+ * Passive gc only inspects smaller areas and will only accept more dirty blocks.
+ *
+ * The idea is to help clear out space in a more spread-out manner.
+ * Dunno if it really does anything useful.
+ */
+static int yaffs_CheckGarbageCollection(yaffs_Device * dev)
+{
+	int block;
+	int aggressive;
+	int gcOk = YAFFS_OK;
+	int maxTries = 0;
+
+	int checkpointBlockAdjust;
+
+	if (dev->isDoingGC) {
+		/* Bail out so we don't get recursive gc */
+		return YAFFS_OK;
+	}
+
+	/* This loop should pass the first time.
+	 * We'll only see looping here if the erase of the collected block fails.
+	 */
+
+	do {
+		maxTries++;
+
+		checkpointBlockAdjust = (dev->nCheckpointReservedBlocks - dev->blocksInCheckpoint);
+		if(checkpointBlockAdjust < 0)
+			checkpointBlockAdjust = 0;
+
+		if (dev->nErasedBlocks < (dev->nReservedBlocks + checkpointBlockAdjust + 2)) {
+			/* We need a block soon...*/
+			aggressive = 1;
+		} else {
+			/* We're in no hurry */
+			aggressive = 0;
+		}
+
+		block = yaffs_FindBlockForGarbageCollection(dev, aggressive);
+
+		if (block > 0) {
+			dev->garbageCollections++;
+			if (!aggressive) {
+				dev->passiveGarbageCollections++;
+			}
+
+			T(YAFFS_TRACE_GC,
+			  (TSTR
+			   ("yaffs: GC erasedBlocks %d aggressive %d" TENDSTR),
+			   dev->nErasedBlocks, aggressive));
+
+			gcOk = yaffs_GarbageCollectBlock(dev, block);
+		}
+
+		if (dev->nErasedBlocks < (dev->nReservedBlocks) && block > 0) {
+			T(YAFFS_TRACE_GC,
+			  (TSTR
+			   ("yaffs: GC !!!no reclaim!!! erasedBlocks %d after try %d block %d"
+			    TENDSTR), dev->nErasedBlocks, maxTries, block));
+		}
+	} while ((dev->nErasedBlocks < dev->nReservedBlocks) && (block > 0)
+		 && (maxTries < 2));
+
+	return aggressive ? gcOk : YAFFS_OK;
+}
+
+/*-------------------------  TAGS --------------------------------*/
+
+static int yaffs_TagsMatch(const yaffs_ExtendedTags * tags, int objectId,
+			   int chunkInObject)
+{
+	return (tags->chunkId == chunkInObject &&
+		tags->objectId == objectId && !tags->chunkDeleted) ? 1 : 0;
+
+}
+
+
+/*-------------------- Data file manipulation -----------------*/
+
+static int yaffs_FindChunkInFile(yaffs_Object * in, int chunkInInode,
+				 yaffs_ExtendedTags * tags)
+{
+	/*Get the Tnode, then get the level 0 offset chunk offset */
+	yaffs_Tnode *tn;
+	int theChunk = -1;
+	yaffs_ExtendedTags localTags;
+	int retVal = -1;
+
+	yaffs_Device *dev = in->myDev;
+
+	if (!tags) {
+		/* Passed a NULL, so use our own tags space */
+		tags = &localTags;
+	}
+
+	tn = yaffs_FindLevel0Tnode(dev, &in->variant.fileVariant, chunkInInode);
+
+	if (tn) {
+		theChunk = yaffs_GetChunkGroupBase(dev,tn,chunkInInode);
+
+		retVal =
+		    yaffs_FindChunkInGroup(dev, theChunk, tags, in->objectId,
+					   chunkInInode);
+	}
+	return retVal;
+}
+
+static int yaffs_FindAndDeleteChunkInFile(yaffs_Object * in, int chunkInInode,
+					  yaffs_ExtendedTags * tags)
+{
+	/* Get the Tnode, then get the level 0 offset chunk offset */
+	yaffs_Tnode *tn;
+	int theChunk = -1;
+	yaffs_ExtendedTags localTags;
+
+	yaffs_Device *dev = in->myDev;
+	int retVal = -1;
+
+	if (!tags) {
+		/* Passed a NULL, so use our own tags space */
+		tags = &localTags;
+	}
+
+	tn = yaffs_FindLevel0Tnode(dev, &in->variant.fileVariant, chunkInInode);
+
+	if (tn) {
+
+		theChunk = yaffs_GetChunkGroupBase(dev,tn,chunkInInode);
+
+		retVal =
+		    yaffs_FindChunkInGroup(dev, theChunk, tags, in->objectId,
+					   chunkInInode);
+
+		/* Delete the entry in the filestructure (if found) */
+		if (retVal != -1) {
+			yaffs_PutLevel0Tnode(dev,tn,chunkInInode,0);
+		}
+	} else {
+		/*T(("No level 0 found for %d\n", chunkInInode)); */
+	}
+
+	if (retVal == -1) {
+		/* T(("Could not find %d to delete\n",chunkInInode)); */
+	}
+	return retVal;
+}
+
+#ifdef YAFFS_PARANOID
+
+static int yaffs_CheckFileSanity(yaffs_Object * in)
+{
+	int chunk;
+	int nChunks;
+	int fSize;
+	int failed = 0;
+	int objId;
+	yaffs_Tnode *tn;
+	yaffs_Tags localTags;
+	yaffs_Tags *tags = &localTags;
+	int theChunk;
+	int chunkDeleted;
+
+	if (in->variantType != YAFFS_OBJECT_TYPE_FILE) {
+		/* T(("Object not a file\n")); */
+		return YAFFS_FAIL;
+	}
+
+	objId = in->objectId;
+	fSize = in->variant.fileVariant.fileSize;
+	nChunks =
+	    (fSize + in->myDev->nDataBytesPerChunk - 1) / in->myDev->nDataBytesPerChunk;
+
+	for (chunk = 1; chunk <= nChunks; chunk++) {
+		tn = yaffs_FindLevel0Tnode(in->myDev, &in->variant.fileVariant,
+					   chunk);
+
+		if (tn) {
+
+			theChunk = yaffs_GetChunkGroupBase(dev,tn,chunk);
+
+			if (yaffs_CheckChunkBits
+			    (dev, theChunk / dev->nChunksPerBlock,
+			     theChunk % dev->nChunksPerBlock)) {
+
+				yaffs_ReadChunkTagsFromNAND(in->myDev, theChunk,
+							    tags,
+							    &chunkDeleted);
+				if (yaffs_TagsMatch
+				    (tags, in->objectId, chunk, chunkDeleted)) {
+					/* found it; */
+
+				}
+			} else {
+
+				failed = 1;
+			}
+
+		} else {
+			/* T(("No level 0 found for %d\n", chunk)); */
+		}
+	}
+
+	return failed ? YAFFS_FAIL : YAFFS_OK;
+}
+
+#endif
+
+static int yaffs_PutChunkIntoFile(yaffs_Object * in, int chunkInInode,
+				  int chunkInNAND, int inScan)
+{
+	/* NB inScan is zero unless scanning.
+	 * For forward scanning, inScan is > 0;
+	 * for backward scanning inScan is < 0
+	 */
+
+	yaffs_Tnode *tn;
+	yaffs_Device *dev = in->myDev;
+	int existingChunk;
+	yaffs_ExtendedTags existingTags;
+	yaffs_ExtendedTags newTags;
+	unsigned existingSerial, newSerial;
+
+	if (in->variantType != YAFFS_OBJECT_TYPE_FILE) {
+		/* Just ignore an attempt at putting a chunk into a non-file during scanning
+		 * If it is not during Scanning then something went wrong!
+		 */
+		if (!inScan) {
+			T(YAFFS_TRACE_ERROR,
+			  (TSTR
+			   ("yaffs tragedy:attempt to put data chunk into a non-file"
+			    TENDSTR)));
+			YBUG();
+		}
+
+		yaffs_DeleteChunk(dev, chunkInNAND, 1, __LINE__);
+		return YAFFS_OK;
+	}
+
+	tn = yaffs_AddOrFindLevel0Tnode(dev,
+					&in->variant.fileVariant,
+					chunkInInode,
+					NULL);
+	if (!tn) {
+		return YAFFS_FAIL;
+	}
+
+	existingChunk = yaffs_GetChunkGroupBase(dev,tn,chunkInInode);
+
+	if (inScan != 0) {
+		/* If we're scanning then we need to test for duplicates
+		 * NB This does not need to be efficient since it should only ever
+		 * happen when the power fails during a write, then only one
+		 * chunk should ever be affected.
+		 *
+		 * Correction for YAFFS2: This could happen quite a lot and we need to think about efficiency! TODO
+		 * Update: For backward scanning we don't need to re-read tags so this is quite cheap.
+		 */
+
+		if (existingChunk != 0) {
+			/* NB Right now existing chunk will not be real chunkId if the device >= 32MB
+			 *    thus we have to do a FindChunkInFile to get the real chunk id.
+			 *
+			 * We have a duplicate now we need to decide which one to use:
+			 *
+			 * Backwards scanning YAFFS2: The old one is what we use, dump the new one.
+			 * Forward scanning YAFFS2: The new one is what we use, dump the old one.
+			 * YAFFS1: Get both sets of tags and compare serial numbers.
+			 */
+
+			if (inScan > 0) {
+				/* Only do this for forward scanning */
+				yaffs_ReadChunkWithTagsFromNAND(dev,
+								chunkInNAND,
+								NULL, &newTags);
+
+				/* Do a proper find */
+				existingChunk =
+				    yaffs_FindChunkInFile(in, chunkInInode,
+							  &existingTags);
+			}
+
+			if (existingChunk <= 0) {
+				/*Hoosterman - how did this happen? */
+
+				T(YAFFS_TRACE_ERROR,
+				  (TSTR
+				   ("yaffs tragedy: existing chunk < 0 in scan"
+				    TENDSTR)));
+
+			}
+
+			/* NB The deleted flags should be false, otherwise the chunks will
+			 * not be loaded during a scan
+			 */
+
+			newSerial = newTags.serialNumber;
+			existingSerial = existingTags.serialNumber;
+
+			if ((inScan > 0) &&
+			    (in->myDev->isYaffs2 ||
+			     existingChunk <= 0 ||
+			     ((existingSerial + 1) & 3) == newSerial)) {
+				/* Forward scanning.
+				 * Use new
+				 * Delete the old one and drop through to update the tnode
+				 */
+				yaffs_DeleteChunk(dev, existingChunk, 1,
+						  __LINE__);
+			} else {
+				/* Backward scanning or we want to use the existing one
+				 * Use existing.
+				 * Delete the new one and return early so that the tnode isn't changed
+				 */
+				yaffs_DeleteChunk(dev, chunkInNAND, 1,
+						  __LINE__);
+				return YAFFS_OK;
+			}
+		}
+
+	}
+
+	if (existingChunk == 0) {
+		in->nDataChunks++;
+	}
+
+	yaffs_PutLevel0Tnode(dev,tn,chunkInInode,chunkInNAND);
+
+	return YAFFS_OK;
+}
+
+static int yaffs_ReadChunkDataFromObject(yaffs_Object * in, int chunkInInode,
+					 __u8 * buffer)
+{
+	int chunkInNAND = yaffs_FindChunkInFile(in, chunkInInode, NULL);
+
+	if (chunkInNAND >= 0) {
+		return yaffs_ReadChunkWithTagsFromNAND(in->myDev, chunkInNAND,
+						       buffer,NULL);
+	} else {
+		T(YAFFS_TRACE_NANDACCESS,
+		  (TSTR("Chunk %d not found zero instead" TENDSTR),
+		   chunkInNAND));
+		/* get sane (zero) data if you read a hole */
+		memset(buffer, 0, in->myDev->nDataBytesPerChunk);
+		return 0;
+	}
+
+}
+
+void yaffs_DeleteChunk(yaffs_Device * dev, int chunkId, int markNAND, int lyn)
+{
+	int block;
+	int page;
+	yaffs_ExtendedTags tags;
+	yaffs_BlockInfo *bi;
+
+	if (chunkId <= 0)
+		return;
+
+
+	dev->nDeletions++;
+	block = chunkId / dev->nChunksPerBlock;
+	page = chunkId % dev->nChunksPerBlock;
+
+
+	if(!yaffs_CheckChunkBit(dev,block,page))
+		T(YAFFS_TRACE_VERIFY,
+		 	(TSTR("Deleting invalid chunk %d"TENDSTR),
+		 	 chunkId));
+
+	bi = yaffs_GetBlockInfo(dev, block);
+
+	T(YAFFS_TRACE_DELETION,
+	  (TSTR("line %d delete of chunk %d" TENDSTR), lyn, chunkId));
+
+	if (markNAND &&
+	    bi->blockState != YAFFS_BLOCK_STATE_COLLECTING && !dev->isYaffs2) {
+
+		yaffs_InitialiseTags(&tags);
+
+		tags.chunkDeleted = 1;
+
+		yaffs_WriteChunkWithTagsToNAND(dev, chunkId, NULL, &tags);
+		yaffs_HandleUpdateChunk(dev, chunkId, &tags);
+	} else {
+		dev->nUnmarkedDeletions++;
+	}
+
+	/* Pull out of the management area.
+	 * If the whole block became dirty, this will kick off an erasure.
+	 */
+	if (bi->blockState == YAFFS_BLOCK_STATE_ALLOCATING ||
+	    bi->blockState == YAFFS_BLOCK_STATE_FULL ||
+	    bi->blockState == YAFFS_BLOCK_STATE_NEEDS_SCANNING ||
+	    bi->blockState == YAFFS_BLOCK_STATE_COLLECTING) {
+		dev->nFreeChunks++;
+
+		yaffs_ClearChunkBit(dev, block, page);
+
+		bi->pagesInUse--;
+
+		if (bi->pagesInUse == 0 &&
+		    !bi->hasShrinkHeader &&
+		    bi->blockState != YAFFS_BLOCK_STATE_ALLOCATING &&
+		    bi->blockState != YAFFS_BLOCK_STATE_NEEDS_SCANNING) {
+			yaffs_BlockBecameDirty(dev, block);
+		}
+
+	} else {
+		/* T(("Bad news deleting chunk %d\n",chunkId)); */
+	}
+
+}
+
+static int yaffs_WriteChunkDataToObject(yaffs_Object * in, int chunkInInode,
+					const __u8 * buffer, int nBytes,
+					int useReserve)
+{
+	/* Find old chunk Need to do this to get serial number
+	 * Write new one and patch into tree.
+	 * Invalidate old tags.
+	 */
+
+	int prevChunkId;
+	yaffs_ExtendedTags prevTags;
+
+	int newChunkId;
+	yaffs_ExtendedTags newTags;
+
+	yaffs_Device *dev = in->myDev;
+
+	yaffs_CheckGarbageCollection(dev);
+
+	/* Get the previous chunk at this location in the file if it exists */
+	prevChunkId = yaffs_FindChunkInFile(in, chunkInInode, &prevTags);
+
+	/* Set up new tags */
+	yaffs_InitialiseTags(&newTags);
+
+	newTags.chunkId = chunkInInode;
+	newTags.objectId = in->objectId;
+	newTags.serialNumber =
+	    (prevChunkId >= 0) ? prevTags.serialNumber + 1 : 1;
+	newTags.byteCount = nBytes;
+
+	newChunkId =
+	    yaffs_WriteNewChunkWithTagsToNAND(dev, buffer, &newTags,
+					      useReserve);
+
+	if (newChunkId >= 0) {
+		yaffs_PutChunkIntoFile(in, chunkInInode, newChunkId, 0);
+
+		if (prevChunkId >= 0) {
+			yaffs_DeleteChunk(dev, prevChunkId, 1, __LINE__);
+
+		}
+
+		yaffs_CheckFileSanity(in);
+	}
+	return newChunkId;
+
+}
+
+/* UpdateObjectHeader updates the header on NAND for an object.
+ * If name is not NULL, then that new name is used.
+ */
+int yaffs_UpdateObjectHeader(yaffs_Object * in, const YCHAR * name, int force,
+			     int isShrink, int shadows)
+{
+
+	yaffs_BlockInfo *bi;
+
+	yaffs_Device *dev = in->myDev;
+
+	int prevChunkId;
+	int retVal = 0;
+	int result = 0;
+
+	int newChunkId;
+	yaffs_ExtendedTags newTags;
+	yaffs_ExtendedTags oldTags;
+
+	__u8 *buffer = NULL;
+	YCHAR oldName[YAFFS_MAX_NAME_LENGTH + 1];
+
+	yaffs_ObjectHeader *oh = NULL;
+
+	yaffs_strcpy(oldName,"silly old name");
+
+	if (!in->fake || force) {
+
+		yaffs_CheckGarbageCollection(dev);
+		yaffs_CheckObjectDetailsLoaded(in);
+
+		buffer = yaffs_GetTempBuffer(in->myDev, __LINE__);
+		oh = (yaffs_ObjectHeader *) buffer;
+
+		prevChunkId = in->chunkId;
+
+		if (prevChunkId >= 0) {
+			result = yaffs_ReadChunkWithTagsFromNAND(dev, prevChunkId,
+							buffer, &oldTags);
+
+			yaffs_VerifyObjectHeader(in,oh,&oldTags,0);
+
+			memcpy(oldName, oh->name, sizeof(oh->name));
+		}
+
+		memset(buffer, 0xFF, dev->nDataBytesPerChunk);
+
+		oh->type = in->variantType;
+		oh->yst_mode = in->yst_mode;
+		oh->shadowsObject = shadows;
+
+#ifdef CONFIG_YAFFS_WINCE
+		oh->win_atime[0] = in->win_atime[0];
+		oh->win_ctime[0] = in->win_ctime[0];
+		oh->win_mtime[0] = in->win_mtime[0];
+		oh->win_atime[1] = in->win_atime[1];
+		oh->win_ctime[1] = in->win_ctime[1];
+		oh->win_mtime[1] = in->win_mtime[1];
+#else
+		oh->yst_uid = in->yst_uid;
+		oh->yst_gid = in->yst_gid;
+		oh->yst_atime = in->yst_atime;
+		oh->yst_mtime = in->yst_mtime;
+		oh->yst_ctime = in->yst_ctime;
+		oh->yst_rdev = in->yst_rdev;
+#endif
+		if (in->parent) {
+			oh->parentObjectId = in->parent->objectId;
+		} else {
+			oh->parentObjectId = 0;
+		}
+
+		if (name && *name) {
+			memset(oh->name, 0, sizeof(oh->name));
+			yaffs_strncpy(oh->name, name, YAFFS_MAX_NAME_LENGTH);
+		} else if (prevChunkId>=0) {
+			memcpy(oh->name, oldName, sizeof(oh->name));
+		} else {
+			memset(oh->name, 0, sizeof(oh->name));
+		}
+
+		oh->isShrink = isShrink;
+
+		switch (in->variantType) {
+		case YAFFS_OBJECT_TYPE_UNKNOWN:
+			/* Should not happen */
+			break;
+		case YAFFS_OBJECT_TYPE_FILE:
+			oh->fileSize =
+			    (oh->parentObjectId == YAFFS_OBJECTID_DELETED
+			     || oh->parentObjectId ==
+			     YAFFS_OBJECTID_UNLINKED) ? 0 : in->variant.
+			    fileVariant.fileSize;
+			break;
+		case YAFFS_OBJECT_TYPE_HARDLINK:
+			oh->equivalentObjectId =
+			    in->variant.hardLinkVariant.equivalentObjectId;
+			break;
+		case YAFFS_OBJECT_TYPE_SPECIAL:
+			/* Do nothing */
+			break;
+		case YAFFS_OBJECT_TYPE_DIRECTORY:
+			/* Do nothing */
+			break;
+		case YAFFS_OBJECT_TYPE_SYMLINK:
+			yaffs_strncpy(oh->alias,
+				      in->variant.symLinkVariant.alias,
+				      YAFFS_MAX_ALIAS_LENGTH);
+			oh->alias[YAFFS_MAX_ALIAS_LENGTH] = 0;
+			break;
+		}
+
+		/* Tags */
+		yaffs_InitialiseTags(&newTags);
+		in->serial++;
+		newTags.chunkId = 0;
+		newTags.objectId = in->objectId;
+		newTags.serialNumber = in->serial;
+
+		/* Add extra info for file header */
+
+		newTags.extraHeaderInfoAvailable = 1;
+		newTags.extraParentObjectId = oh->parentObjectId;
+		newTags.extraFileLength = oh->fileSize;
+		newTags.extraIsShrinkHeader = oh->isShrink;
+		newTags.extraEquivalentObjectId = oh->equivalentObjectId;
+		newTags.extraShadows = (oh->shadowsObject > 0) ? 1 : 0;
+		newTags.extraObjectType = in->variantType;
+
+		yaffs_VerifyObjectHeader(in,oh,&newTags,1);
+
+		/* Create new chunk in NAND */
+		newChunkId =
+		    yaffs_WriteNewChunkWithTagsToNAND(dev, buffer, &newTags,
+						      (prevChunkId >= 0) ? 1 : 0);
+
+		if (newChunkId >= 0) {
+
+			in->chunkId = newChunkId;
+
+			if (prevChunkId >= 0) {
+				yaffs_DeleteChunk(dev, prevChunkId, 1,
+						  __LINE__);
+			}
+
+			if(!yaffs_ObjectHasCachedWriteData(in))
+				in->dirty = 0;
+
+			/* If this was a shrink, then mark the block that the chunk lives on */
+			if (isShrink) {
+				bi = yaffs_GetBlockInfo(in->myDev,
+							newChunkId /in->myDev->	nChunksPerBlock);
+				bi->hasShrinkHeader = 1;
+			}
+
+		}
+
+		retVal = newChunkId;
+
+	}
+
+	if (buffer)
+		yaffs_ReleaseTempBuffer(dev, buffer, __LINE__);
+
+	return retVal;
+}
+
+/*------------------------ Short Operations Cache ----------------------------------------
+ *   In many situations where there is no high level buffering (eg WinCE) a lot of
+ *   reads might be short sequential reads, and a lot of writes may be short
+ *   sequential writes. eg. scanning/writing a jpeg file.
+ *   In these cases, a short read/write cache can provide a huge perfomance benefit
+ *   with dumb-as-a-rock code.
+ *   In Linux, the page cache provides read buffering aand the short op cache provides write
+ *   buffering.
+ *
+ *   There are a limited number (~10) of cache chunks per device so that we don't
+ *   need a very intelligent search.
+ */
+
+static int yaffs_ObjectHasCachedWriteData(yaffs_Object *obj)
+{
+	yaffs_Device *dev = obj->myDev;
+	int i;
+	yaffs_ChunkCache *cache;
+	int nCaches = obj->myDev->nShortOpCaches;
+
+	for(i = 0; i < nCaches; i++){
+		cache = &dev->srCache[i];
+		if (cache->object == obj &&
+		    cache->dirty)
+			return 1;
+	}
+
+	return 0;
+}
+
+
+static void yaffs_FlushFilesChunkCache(yaffs_Object * obj)
+{
+	yaffs_Device *dev = obj->myDev;
+	int lowest = -99;	/* Stop compiler whining. */
+	int i;
+	yaffs_ChunkCache *cache;
+	int chunkWritten = 0;
+	int nCaches = obj->myDev->nShortOpCaches;
+
+	if (nCaches > 0) {
+		do {
+			cache = NULL;
+
+			/* Find the dirty cache for this object with the lowest chunk id. */
+			for (i = 0; i < nCaches; i++) {
+				if (dev->srCache[i].object == obj &&
+				    dev->srCache[i].dirty) {
+					if (!cache
+					    || dev->srCache[i].chunkId <
+					    lowest) {
+						cache = &dev->srCache[i];
+						lowest = cache->chunkId;
+					}
+				}
+			}
+
+			if (cache && !cache->locked) {
+				/* Write it out and free it up */
+
+				chunkWritten =
+				    yaffs_WriteChunkDataToObject(cache->object,
+								 cache->chunkId,
+								 cache->data,
+								 cache->nBytes,
+								 1);
+				cache->dirty = 0;
+				cache->object = NULL;
+			}
+
+		} while (cache && chunkWritten > 0);
+
+		if (cache) {
+			/* Hoosterman, disk full while writing cache out. */
+			T(YAFFS_TRACE_ERROR,
+			  (TSTR("yaffs tragedy: no space during cache write" TENDSTR)));
+
+		}
+	}
+
+}
+
+/*yaffs_FlushEntireDeviceCache(dev)
+ *
+ *
+ */
+
+void yaffs_FlushEntireDeviceCache(yaffs_Device *dev)
+{
+	yaffs_Object *obj;
+	int nCaches = dev->nShortOpCaches;
+	int i;
+
+	/* Find a dirty object in the cache and flush it...
+	 * until there are no further dirty objects.
+	 */
+	do {
+		obj = NULL;
+		for( i = 0; i < nCaches && !obj; i++) {
+			if (dev->srCache[i].object &&
+			    dev->srCache[i].dirty)
+				obj = dev->srCache[i].object;
+
+		}
+		if(obj)
+			yaffs_FlushFilesChunkCache(obj);
+
+	} while(obj);
+
+}
+
+
+/* Grab us a cache chunk for use.
+ * First look for an empty one.
+ * Then look for the least recently used non-dirty one.
+ * Then look for the least recently used dirty one...., flush and look again.
+ */
+static yaffs_ChunkCache *yaffs_GrabChunkCacheWorker(yaffs_Device * dev)
+{
+	int i;
+	int usage;
+	int theOne;
+
+	if (dev->nShortOpCaches > 0) {
+		for (i = 0; i < dev->nShortOpCaches; i++) {
+			if (!dev->srCache[i].object)
+				return &dev->srCache[i];
+		}
+
+		return NULL;
+
+		theOne = -1;
+		usage = 0;	/* just to stop the compiler grizzling */
+
+		for (i = 0; i < dev->nShortOpCaches; i++) {
+			if (!dev->srCache[i].dirty &&
+			    ((dev->srCache[i].lastUse < usage && theOne >= 0) ||
+			     theOne < 0)) {
+				usage = dev->srCache[i].lastUse;
+				theOne = i;
+			}
+		}
+
+
+		return theOne >= 0 ? &dev->srCache[theOne] : NULL;
+	} else {
+		return NULL;
+	}
+
+}
+
+static yaffs_ChunkCache *yaffs_GrabChunkCache(yaffs_Device * dev)
+{
+	yaffs_ChunkCache *cache;
+	yaffs_Object *theObj;
+	int usage;
+	int i;
+	int pushout;
+
+	if (dev->nShortOpCaches > 0) {
+		/* Try find a non-dirty one... */
+
+		cache = yaffs_GrabChunkCacheWorker(dev);
+
+		if (!cache) {
+			/* They were all dirty, find the last recently used object and flush
+			 * its cache, then  find again.
+			 * NB what's here is not very accurate, we actually flush the object
+			 * the last recently used page.
+			 */
+
+			/* With locking we can't assume we can use entry zero */
+
+			theObj = NULL;
+			usage = -1;
+			cache = NULL;
+			pushout = -1;
+
+			for (i = 0; i < dev->nShortOpCaches; i++) {
+				if (dev->srCache[i].object &&
+				    !dev->srCache[i].locked &&
+				    (dev->srCache[i].lastUse < usage || !cache))
+				{
+					usage = dev->srCache[i].lastUse;
+					theObj = dev->srCache[i].object;
+					cache = &dev->srCache[i];
+					pushout = i;
+				}
+			}
+
+			if (!cache || cache->dirty) {
+				/* Flush and try again */
+				yaffs_FlushFilesChunkCache(theObj);
+				cache = yaffs_GrabChunkCacheWorker(dev);
+			}
+
+		}
+		return cache;
+	} else
+		return NULL;
+
+}
+
+/* Find a cached chunk */
+static yaffs_ChunkCache *yaffs_FindChunkCache(const yaffs_Object * obj,
+					      int chunkId)
+{
+	yaffs_Device *dev = obj->myDev;
+	int i;
+	if (dev->nShortOpCaches > 0) {
+		for (i = 0; i < dev->nShortOpCaches; i++) {
+			if (dev->srCache[i].object == obj &&
+			    dev->srCache[i].chunkId == chunkId) {
+				dev->cacheHits++;
+
+				return &dev->srCache[i];
+			}
+		}
+	}
+	return NULL;
+}
+
+/* Mark the chunk for the least recently used algorithym */
+static void yaffs_UseChunkCache(yaffs_Device * dev, yaffs_ChunkCache * cache,
+				int isAWrite)
+{
+
+	if (dev->nShortOpCaches > 0) {
+		if (dev->srLastUse < 0 || dev->srLastUse > 100000000) {
+			/* Reset the cache usages */
+			int i;
+			for (i = 1; i < dev->nShortOpCaches; i++) {
+				dev->srCache[i].lastUse = 0;
+			}
+			dev->srLastUse = 0;
+		}
+
+		dev->srLastUse++;
+
+		cache->lastUse = dev->srLastUse;
+
+		if (isAWrite) {
+			cache->dirty = 1;
+		}
+	}
+}
+
+/* Invalidate a single cache page.
+ * Do this when a whole page gets written,
+ * ie the short cache for this page is no longer valid.
+ */
+static void yaffs_InvalidateChunkCache(yaffs_Object * object, int chunkId)
+{
+	if (object->myDev->nShortOpCaches > 0) {
+		yaffs_ChunkCache *cache = yaffs_FindChunkCache(object, chunkId);
+
+		if (cache) {
+			cache->object = NULL;
+		}
+	}
+}
+
+/* Invalidate all the cache pages associated with this object
+ * Do this whenever ther file is deleted or resized.
+ */
+static void yaffs_InvalidateWholeChunkCache(yaffs_Object * in)
+{
+	int i;
+	yaffs_Device *dev = in->myDev;
+
+	if (dev->nShortOpCaches > 0) {
+		/* Invalidate it. */
+		for (i = 0; i < dev->nShortOpCaches; i++) {
+			if (dev->srCache[i].object == in) {
+				dev->srCache[i].object = NULL;
+			}
+		}
+	}
+}
+
+/*--------------------- Checkpointing --------------------*/
+
+
+static int yaffs_WriteCheckpointValidityMarker(yaffs_Device *dev,int head)
+{
+	yaffs_CheckpointValidity cp;
+
+	memset(&cp,0,sizeof(cp));
+
+	cp.structType = sizeof(cp);
+	cp.magic = YAFFS_MAGIC;
+	cp.version = YAFFS_CHECKPOINT_VERSION;
+	cp.head = (head) ? 1 : 0;
+
+	return (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp))?
+		1 : 0;
+}
+
+static int yaffs_ReadCheckpointValidityMarker(yaffs_Device *dev, int head)
+{
+	yaffs_CheckpointValidity cp;
+	int ok;
+
+	ok = (yaffs_CheckpointRead(dev,&cp,sizeof(cp)) == sizeof(cp));
+
+	if(ok)
+		ok = (cp.structType == sizeof(cp)) &&
+		     (cp.magic == YAFFS_MAGIC) &&
+		     (cp.version == YAFFS_CHECKPOINT_VERSION) &&
+		     (cp.head == ((head) ? 1 : 0));
+	return ok ? 1 : 0;
+}
+
+static void yaffs_DeviceToCheckpointDevice(yaffs_CheckpointDevice *cp,
+					   yaffs_Device *dev)
+{
+	cp->nErasedBlocks = dev->nErasedBlocks;
+	cp->allocationBlock = dev->allocationBlock;
+	cp->allocationPage = dev->allocationPage;
+	cp->nFreeChunks = dev->nFreeChunks;
+
+	cp->nDeletedFiles = dev->nDeletedFiles;
+	cp->nUnlinkedFiles = dev->nUnlinkedFiles;
+	cp->nBackgroundDeletions = dev->nBackgroundDeletions;
+	cp->sequenceNumber = dev->sequenceNumber;
+	cp->oldestDirtySequence = dev->oldestDirtySequence;
+
+}
+
+static void yaffs_CheckpointDeviceToDevice(yaffs_Device *dev,
+					   yaffs_CheckpointDevice *cp)
+{
+	dev->nErasedBlocks = cp->nErasedBlocks;
+	dev->allocationBlock = cp->allocationBlock;
+	dev->allocationPage = cp->allocationPage;
+	dev->nFreeChunks = cp->nFreeChunks;
+
+	dev->nDeletedFiles = cp->nDeletedFiles;
+	dev->nUnlinkedFiles = cp->nUnlinkedFiles;
+	dev->nBackgroundDeletions = cp->nBackgroundDeletions;
+	dev->sequenceNumber = cp->sequenceNumber;
+	dev->oldestDirtySequence = cp->oldestDirtySequence;
+}
+
+
+static int yaffs_WriteCheckpointDevice(yaffs_Device *dev)
+{
+	yaffs_CheckpointDevice cp;
+	__u32 nBytes;
+	__u32 nBlocks = (dev->internalEndBlock - dev->internalStartBlock + 1);
+
+	int ok;
+
+	/* Write device runtime values*/
+	yaffs_DeviceToCheckpointDevice(&cp,dev);
+	cp.structType = sizeof(cp);
+
+	ok = (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp));
+
+	/* Write block info */
+	if(ok) {
+		nBytes = nBlocks * sizeof(yaffs_BlockInfo);
+		ok = (yaffs_CheckpointWrite(dev,dev->blockInfo,nBytes) == nBytes);
+	}
+
+	/* Write chunk bits */
+	if(ok) {
+		nBytes = nBlocks * dev->chunkBitmapStride;
+		ok = (yaffs_CheckpointWrite(dev,dev->chunkBits,nBytes) == nBytes);
+	}
+	return	 ok ? 1 : 0;
+
+}
+
+static int yaffs_ReadCheckpointDevice(yaffs_Device *dev)
+{
+	yaffs_CheckpointDevice cp;
+	__u32 nBytes;
+	__u32 nBlocks = (dev->internalEndBlock - dev->internalStartBlock + 1);
+
+	int ok;
+
+	ok = (yaffs_CheckpointRead(dev,&cp,sizeof(cp)) == sizeof(cp));
+	if(!ok)
+		return 0;
+
+	if(cp.structType != sizeof(cp))
+		return 0;
+
+
+	yaffs_CheckpointDeviceToDevice(dev,&cp);
+
+	nBytes = nBlocks * sizeof(yaffs_BlockInfo);
+
+	ok = (yaffs_CheckpointRead(dev,dev->blockInfo,nBytes) == nBytes);
+
+	if(!ok)
+		return 0;
+	nBytes = nBlocks * dev->chunkBitmapStride;
+
+	ok = (yaffs_CheckpointRead(dev,dev->chunkBits,nBytes) == nBytes);
+
+	return ok ? 1 : 0;
+}
+
+static void yaffs_ObjectToCheckpointObject(yaffs_CheckpointObject *cp,
+					   yaffs_Object *obj)
+{
+
+	cp->objectId = obj->objectId;
+	cp->parentId = (obj->parent) ? obj->parent->objectId : 0;
+	cp->chunkId = obj->chunkId;
+	cp->variantType = obj->variantType;
+	cp->deleted = obj->deleted;
+	cp->softDeleted = obj->softDeleted;
+	cp->unlinked = obj->unlinked;
+	cp->fake = obj->fake;
+	cp->renameAllowed = obj->renameAllowed;
+	cp->unlinkAllowed = obj->unlinkAllowed;
+	cp->serial = obj->serial;
+	cp->nDataChunks = obj->nDataChunks;
+
+	if(obj->variantType == YAFFS_OBJECT_TYPE_FILE)
+		cp->fileSizeOrEquivalentObjectId = obj->variant.fileVariant.fileSize;
+	else if(obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK)
+		cp->fileSizeOrEquivalentObjectId = obj->variant.hardLinkVariant.equivalentObjectId;
+}
+
+static void yaffs_CheckpointObjectToObject( yaffs_Object *obj,yaffs_CheckpointObject *cp)
+{
+
+	yaffs_Object *parent;
+
+	obj->objectId = cp->objectId;
+
+	if(cp->parentId)
+		parent = yaffs_FindOrCreateObjectByNumber(
+					obj->myDev,
+					cp->parentId,
+					YAFFS_OBJECT_TYPE_DIRECTORY);
+	else
+		parent = NULL;
+
+	if(parent)
+		yaffs_AddObjectToDirectory(parent, obj);
+
+	obj->chunkId = cp->chunkId;
+	obj->variantType = cp->variantType;
+	obj->deleted = cp->deleted;
+	obj->softDeleted = cp->softDeleted;
+	obj->unlinked = cp->unlinked;
+	obj->fake = cp->fake;
+	obj->renameAllowed = cp->renameAllowed;
+	obj->unlinkAllowed = cp->unlinkAllowed;
+	obj->serial = cp->serial;
+	obj->nDataChunks = cp->nDataChunks;
+
+	if(obj->variantType == YAFFS_OBJECT_TYPE_FILE)
+		obj->variant.fileVariant.fileSize = cp->fileSizeOrEquivalentObjectId;
+	else if(obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK)
+		obj->variant.hardLinkVariant.equivalentObjectId = cp->fileSizeOrEquivalentObjectId;
+
+	if(obj->objectId >= YAFFS_NOBJECT_BUCKETS)
+		obj->lazyLoaded = 1;
+}
+
+
+
+static int yaffs_CheckpointTnodeWorker(yaffs_Object * in, yaffs_Tnode * tn,
+				  	__u32 level, int chunkOffset)
+{
+	int i;
+	yaffs_Device *dev = in->myDev;
+	int ok = 1;
+	int nTnodeBytes = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
+
+	if (tn) {
+		if (level > 0) {
+
+			for (i = 0; i < YAFFS_NTNODES_INTERNAL && ok; i++){
+				if (tn->internal[i]) {
+					ok = yaffs_CheckpointTnodeWorker(in,
+							tn->internal[i],
+							level - 1,
+							(chunkOffset<<YAFFS_TNODES_INTERNAL_BITS) + i);
+				}
+			}
+		} else if (level == 0) {
+			__u32 baseOffset = chunkOffset <<  YAFFS_TNODES_LEVEL0_BITS;
+			/* printf("write tnode at %d\n",baseOffset); */
+			ok = (yaffs_CheckpointWrite(dev,&baseOffset,sizeof(baseOffset)) == sizeof(baseOffset));
+			if(ok)
+				ok = (yaffs_CheckpointWrite(dev,tn,nTnodeBytes) == nTnodeBytes);
+		}
+	}
+
+	return ok;
+
+}
+
+static int yaffs_WriteCheckpointTnodes(yaffs_Object *obj)
+{
+	__u32 endMarker = ~0;
+	int ok = 1;
+
+	if(obj->variantType == YAFFS_OBJECT_TYPE_FILE){
+		ok = yaffs_CheckpointTnodeWorker(obj,
+					    obj->variant.fileVariant.top,
+					    obj->variant.fileVariant.topLevel,
+					    0);
+		if(ok)
+			ok = (yaffs_CheckpointWrite(obj->myDev,&endMarker,sizeof(endMarker)) ==
+				sizeof(endMarker));
+	}
+
+	return ok ? 1 : 0;
+}
+
+static int yaffs_ReadCheckpointTnodes(yaffs_Object *obj)
+{
+	__u32 baseChunk;
+	int ok = 1;
+	yaffs_Device *dev = obj->myDev;
+	yaffs_FileStructure *fileStructPtr = &obj->variant.fileVariant;
+	yaffs_Tnode *tn;
+	int nread = 0;
+
+	ok = (yaffs_CheckpointRead(dev,&baseChunk,sizeof(baseChunk)) == sizeof(baseChunk));
+
+	while(ok && (~baseChunk)){
+		nread++;
+		/* Read level 0 tnode */
+
+
+		/* printf("read  tnode at %d\n",baseChunk); */
+		tn = yaffs_GetTnodeRaw(dev);
+		if(tn)
+			ok = (yaffs_CheckpointRead(dev,tn,(dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8) ==
+			      (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8);
+		else
+			ok = 0;
+
+		if(tn && ok){
+			ok = yaffs_AddOrFindLevel0Tnode(dev,
+					       		fileStructPtr,
+					       		baseChunk,
+					       		tn) ? 1 : 0;
+
+		}
+
+		if(ok)
+			ok = (yaffs_CheckpointRead(dev,&baseChunk,sizeof(baseChunk)) == sizeof(baseChunk));
+
+	}
+
+	T(YAFFS_TRACE_CHECKPOINT,(
+		TSTR("Checkpoint read tnodes %d records, last %d. ok %d" TENDSTR),
+		nread,baseChunk,ok));
+
+	return ok ? 1 : 0;
+}
+
+
+static int yaffs_WriteCheckpointObjects(yaffs_Device *dev)
+{
+	yaffs_Object *obj;
+	yaffs_CheckpointObject cp;
+	int i;
+	int ok = 1;
+	struct list_head *lh;
+
+
+	/* Iterate through the objects in each hash entry,
+	 * dumping them to the checkpointing stream.
+	 */
+
+	 for(i = 0; ok &&  i <  YAFFS_NOBJECT_BUCKETS; i++){
+	 	list_for_each(lh, &dev->objectBucket[i].list) {
+			if (lh) {
+				obj = list_entry(lh, yaffs_Object, hashLink);
+				if (!obj->deferedFree) {
+					yaffs_ObjectToCheckpointObject(&cp,obj);
+					cp.structType = sizeof(cp);
+
+					T(YAFFS_TRACE_CHECKPOINT,(
+						TSTR("Checkpoint write object %d parent %d type %d chunk %d obj addr %x" TENDSTR),
+						cp.objectId,cp.parentId,cp.variantType,cp.chunkId,(unsigned) obj));
+
+					ok = (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp));
+
+					if(ok && obj->variantType == YAFFS_OBJECT_TYPE_FILE){
+						ok = yaffs_WriteCheckpointTnodes(obj);
+					}
+				}
+			}
+		}
+	 }
+
+	 /* Dump end of list */
+	memset(&cp,0xFF,sizeof(yaffs_CheckpointObject));
+	cp.structType = sizeof(cp);
+
+	if(ok)
+		ok = (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp));
+
+	return ok ? 1 : 0;
+}
+
+static int yaffs_ReadCheckpointObjects(yaffs_Device *dev)
+{
+	yaffs_Object *obj;
+	yaffs_CheckpointObject cp;
+	int ok = 1;
+	int done = 0;
+	yaffs_Object *hardList = NULL;
+
+	while(ok && !done) {
+		ok = (yaffs_CheckpointRead(dev,&cp,sizeof(cp)) == sizeof(cp));
+		if(cp.structType != sizeof(cp)) {
+			T(YAFFS_TRACE_CHECKPOINT,(TSTR("struct size %d instead of %d ok %d"TENDSTR),
+				cp.structType,sizeof(cp),ok));
+			ok = 0;
+		}
+
+		T(YAFFS_TRACE_CHECKPOINT,(TSTR("Checkpoint read object %d parent %d type %d chunk %d " TENDSTR),
+			cp.objectId,cp.parentId,cp.variantType,cp.chunkId));
+
+		if(ok && cp.objectId == ~0)
+			done = 1;
+		else if(ok){
+			obj = yaffs_FindOrCreateObjectByNumber(dev,cp.objectId, cp.variantType);
+			if(obj) {
+				yaffs_CheckpointObjectToObject(obj,&cp);
+				if(obj->variantType == YAFFS_OBJECT_TYPE_FILE) {
+					ok = yaffs_ReadCheckpointTnodes(obj);
+				} else if(obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) {
+					obj->hardLinks.next =
+						    (struct list_head *)
+						    hardList;
+					hardList = obj;
+				}
+
+			}
+		}
+	}
+
+	if(ok)
+		yaffs_HardlinkFixup(dev,hardList);
+
+	return ok ? 1 : 0;
+}
+
+static int yaffs_WriteCheckpointSum(yaffs_Device *dev)
+{
+	__u32 checkpointSum;
+	int ok;
+
+	yaffs_GetCheckpointSum(dev,&checkpointSum);
+
+	ok = (yaffs_CheckpointWrite(dev,&checkpointSum,sizeof(checkpointSum)) == sizeof(checkpointSum));
+
+	if(!ok)
+		return 0;
+
+	return 1;
+}
+
+static int yaffs_ReadCheckpointSum(yaffs_Device *dev)
+{
+	__u32 checkpointSum0;
+	__u32 checkpointSum1;
+	int ok;
+
+	yaffs_GetCheckpointSum(dev,&checkpointSum0);
+
+	ok = (yaffs_CheckpointRead(dev,&checkpointSum1,sizeof(checkpointSum1)) == sizeof(checkpointSum1));
+
+	if(!ok)
+		return 0;
+
+	if(checkpointSum0 != checkpointSum1)
+		return 0;
+
+	return 1;
+}
+
+
+static int yaffs_WriteCheckpointData(yaffs_Device *dev)
+{
+
+	int ok = 1;
+
+	if(dev->skipCheckpointWrite || !dev->isYaffs2){
+		T(YAFFS_TRACE_CHECKPOINT,(TSTR("skipping checkpoint write" TENDSTR)));
+		ok = 0;
+	}
+
+	if(ok)
+		ok = yaffs_CheckpointOpen(dev,1);
+
+	if(ok){
+		T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint validity" TENDSTR)));
+		ok = yaffs_WriteCheckpointValidityMarker(dev,1);
+	}
+	if(ok){
+		T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint device" TENDSTR)));
+		ok = yaffs_WriteCheckpointDevice(dev);
+	}
+	if(ok){
+		T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint objects" TENDSTR)));
+		ok = yaffs_WriteCheckpointObjects(dev);
+	}
+	if(ok){
+		T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint validity" TENDSTR)));
+		ok = yaffs_WriteCheckpointValidityMarker(dev,0);
+	}
+
+	if(ok){
+		ok = yaffs_WriteCheckpointSum(dev);
+	}
+
+
+	if(!yaffs_CheckpointClose(dev))
+		 ok = 0;
+
+	if(ok)
+	    	dev->isCheckpointed = 1;
+	 else
+	 	dev->isCheckpointed = 0;
+
+	return dev->isCheckpointed;
+}
+
+static int yaffs_ReadCheckpointData(yaffs_Device *dev)
+{
+	int ok = 1;
+
+	if(dev->skipCheckpointRead || !dev->isYaffs2){
+		T(YAFFS_TRACE_CHECKPOINT,(TSTR("skipping checkpoint read" TENDSTR)));
+		ok = 0;
+	}
+
+	if(ok)
+		ok = yaffs_CheckpointOpen(dev,0); /* open for read */
+
+	if(ok){
+		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint validity" TENDSTR)));
+		ok = yaffs_ReadCheckpointValidityMarker(dev,1);
+	}
+	if(ok){
+		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint device" TENDSTR)));
+		ok = yaffs_ReadCheckpointDevice(dev);
+	}
+	if(ok){
+		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint objects" TENDSTR)));
+		ok = yaffs_ReadCheckpointObjects(dev);
+	}
+	if(ok){
+		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint validity" TENDSTR)));
+		ok = yaffs_ReadCheckpointValidityMarker(dev,0);
+	}
+
+	if(ok){
+		ok = yaffs_ReadCheckpointSum(dev);
+		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint checksum %d" TENDSTR),ok));
+	}
+
+	if(!yaffs_CheckpointClose(dev))
+		ok = 0;
+
+	if(ok)
+	    	dev->isCheckpointed = 1;
+	 else
+	 	dev->isCheckpointed = 0;
+
+	return ok ? 1 : 0;
+
+}
+
+static void yaffs_InvalidateCheckpoint(yaffs_Device *dev)
+{
+	if(dev->isCheckpointed ||
+	   dev->blocksInCheckpoint > 0){
+		dev->isCheckpointed = 0;
+		yaffs_CheckpointInvalidateStream(dev);
+		if(dev->superBlock && dev->markSuperBlockDirty)
+			dev->markSuperBlockDirty(dev->superBlock);
+	}
+}
+
+
+int yaffs_CheckpointSave(yaffs_Device *dev)
+{
+
+	T(YAFFS_TRACE_CHECKPOINT,(TSTR("save entry: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
+
+	yaffs_VerifyObjects(dev);
+	yaffs_VerifyBlocks(dev);
+	yaffs_VerifyFreeChunks(dev);
+
+	if(!dev->isCheckpointed) {
+		yaffs_InvalidateCheckpoint(dev);
+		yaffs_WriteCheckpointData(dev);
+	}
+
+	T(YAFFS_TRACE_ALWAYS,(TSTR("save exit: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
+
+	return dev->isCheckpointed;
+}
+
+int yaffs_CheckpointRestore(yaffs_Device *dev)
+{
+	int retval;
+	T(YAFFS_TRACE_CHECKPOINT,(TSTR("restore entry: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
+
+	retval = yaffs_ReadCheckpointData(dev);
+
+	if(dev->isCheckpointed){
+		yaffs_VerifyObjects(dev);
+		yaffs_VerifyBlocks(dev);
+		yaffs_VerifyFreeChunks(dev);
+	}
+
+	T(YAFFS_TRACE_CHECKPOINT,(TSTR("restore exit: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
+
+	return retval;
+}
+
+/*--------------------- File read/write ------------------------
+ * Read and write have very similar structures.
+ * In general the read/write has three parts to it
+ * An incomplete chunk to start with (if the read/write is not chunk-aligned)
+ * Some complete chunks
+ * An incomplete chunk to end off with
+ *
+ * Curve-balls: the first chunk might also be the last chunk.
+ */
+
+int yaffs_ReadDataFromFile(yaffs_Object * in, __u8 * buffer, loff_t offset,
+			   int nBytes)
+{
+
+	int chunk;
+	int start;
+	int nToCopy;
+	int n = nBytes;
+	int nDone = 0;
+	yaffs_ChunkCache *cache;
+
+	yaffs_Device *dev;
+
+	dev = in->myDev;
+
+	while (n > 0) {
+		//chunk = offset / dev->nDataBytesPerChunk + 1;
+		//start = offset % dev->nDataBytesPerChunk;
+		yaffs_AddrToChunk(dev,offset,&chunk,&start);
+		chunk++;
+
+		/* OK now check for the curveball where the start and end are in
+		 * the same chunk.
+		 */
+		if ((start + n) < dev->nDataBytesPerChunk) {
+			nToCopy = n;
+		} else {
+			nToCopy = dev->nDataBytesPerChunk - start;
+		}
+
+		cache = yaffs_FindChunkCache(in, chunk);
+
+		/* If the chunk is already in the cache or it is less than a whole chunk
+		 * then use the cache (if there is caching)
+		 * else bypass the cache.
+		 */
+		if (cache || nToCopy != dev->nDataBytesPerChunk) {
+			if (dev->nShortOpCaches > 0) {
+
+				/* If we can't find the data in the cache, then load it up. */
+
+				if (!cache) {
+					cache = yaffs_GrabChunkCache(in->myDev);
+					cache->object = in;
+					cache->chunkId = chunk;
+					cache->dirty = 0;
+					cache->locked = 0;
+					yaffs_ReadChunkDataFromObject(in, chunk,
+								      cache->
+								      data);
+					cache->nBytes = 0;
+				}
+
+				yaffs_UseChunkCache(dev, cache, 0);
+
+				cache->locked = 1;
+
+#ifdef CONFIG_YAFFS_WINCE
+				yfsd_UnlockYAFFS(TRUE);
+#endif
+				memcpy(buffer, &cache->data[start], nToCopy);
+
+#ifdef CONFIG_YAFFS_WINCE
+				yfsd_LockYAFFS(TRUE);
+#endif
+				cache->locked = 0;
+			} else {
+				/* Read into the local buffer then copy..*/
+
+				__u8 *localBuffer =
+				    yaffs_GetTempBuffer(dev, __LINE__);
+				yaffs_ReadChunkDataFromObject(in, chunk,
+							      localBuffer);
+#ifdef CONFIG_YAFFS_WINCE
+				yfsd_UnlockYAFFS(TRUE);
+#endif
+				memcpy(buffer, &localBuffer[start], nToCopy);
+
+#ifdef CONFIG_YAFFS_WINCE
+				yfsd_LockYAFFS(TRUE);
+#endif
+				yaffs_ReleaseTempBuffer(dev, localBuffer,
+							__LINE__);
+			}
+
+		} else {
+#ifdef CONFIG_YAFFS_WINCE
+			__u8 *localBuffer = yaffs_GetTempBuffer(dev, __LINE__);
+
+			/* Under WinCE can't do direct transfer. Need to use a local buffer.
+			 * This is because we otherwise screw up WinCE's memory mapper
+			 */
+			yaffs_ReadChunkDataFromObject(in, chunk, localBuffer);
+
+#ifdef CONFIG_YAFFS_WINCE
+			yfsd_UnlockYAFFS(TRUE);
+#endif
+			memcpy(buffer, localBuffer, dev->nDataBytesPerChunk);
+
+#ifdef CONFIG_YAFFS_WINCE
+			yfsd_LockYAFFS(TRUE);
+			yaffs_ReleaseTempBuffer(dev, localBuffer, __LINE__);
+#endif
+
+#else
+			/* A full chunk. Read directly into the supplied buffer. */
+			yaffs_ReadChunkDataFromObject(in, chunk, buffer);
+#endif
+		}
+
+		n -= nToCopy;
+		offset += nToCopy;
+		buffer += nToCopy;
+		nDone += nToCopy;
+
+	}
+
+	return nDone;
+}
+
+int yaffs_WriteDataToFile(yaffs_Object * in, const __u8 * buffer, loff_t offset,
+			  int nBytes, int writeThrough)
+{
+
+	int chunk;
+	int start;
+	int nToCopy;
+	int n = nBytes;
+	int nDone = 0;
+	int nToWriteBack;
+	int startOfWrite = offset;
+	int chunkWritten = 0;
+	int nBytesRead;
+
+	yaffs_Device *dev;
+
+	dev = in->myDev;
+
+	while (n > 0 && chunkWritten >= 0) {
+		//chunk = offset / dev->nDataBytesPerChunk + 1;
+		//start = offset % dev->nDataBytesPerChunk;
+		yaffs_AddrToChunk(dev,offset,&chunk,&start);
+		chunk++;
+
+		/* OK now check for the curveball where the start and end are in
+		 * the same chunk.
+		 */
+
+		if ((start + n) < dev->nDataBytesPerChunk) {
+			nToCopy = n;
+
+			/* Now folks, to calculate how many bytes to write back....
+			 * If we're overwriting and not writing to then end of file then
+			 * we need to write back as much as was there before.
+			 */
+
+			nBytesRead =
+			    in->variant.fileVariant.fileSize -
+			    ((chunk - 1) * dev->nDataBytesPerChunk);
+
+			if (nBytesRead > dev->nDataBytesPerChunk) {
+				nBytesRead = dev->nDataBytesPerChunk;
+			}
+
+			nToWriteBack =
+			    (nBytesRead >
+			     (start + n)) ? nBytesRead : (start + n);
+
+		} else {
+			nToCopy = dev->nDataBytesPerChunk - start;
+			nToWriteBack = dev->nDataBytesPerChunk;
+		}
+
+		if (nToCopy != dev->nDataBytesPerChunk) {
+			/* An incomplete start or end chunk (or maybe both start and end chunk) */
+			if (dev->nShortOpCaches > 0) {
+				yaffs_ChunkCache *cache;
+				/* If we can't find the data in the cache, then load the cache */
+				cache = yaffs_FindChunkCache(in, chunk);
+
+				if (!cache
+				    && yaffs_CheckSpaceForAllocation(in->
+								     myDev)) {
+					cache = yaffs_GrabChunkCache(in->myDev);
+					cache->object = in;
+					cache->chunkId = chunk;
+					cache->dirty = 0;
+					cache->locked = 0;
+					yaffs_ReadChunkDataFromObject(in, chunk,
+								      cache->
+								      data);
+				}
+				else if(cache &&
+				        !cache->dirty &&
+					!yaffs_CheckSpaceForAllocation(in->myDev)){
+					/* Drop the cache if it was a read cache item and
+					 * no space check has been made for it.
+					 */
+					 cache = NULL;
+				}
+
+				if (cache) {
+					yaffs_UseChunkCache(dev, cache, 1);
+					cache->locked = 1;
+#ifdef CONFIG_YAFFS_WINCE
+					yfsd_UnlockYAFFS(TRUE);
+#endif
+
+					memcpy(&cache->data[start], buffer,
+					       nToCopy);
+
+#ifdef CONFIG_YAFFS_WINCE
+					yfsd_LockYAFFS(TRUE);
+#endif
+					cache->locked = 0;
+					cache->nBytes = nToWriteBack;
+
+					if (writeThrough) {
+						chunkWritten =
+						    yaffs_WriteChunkDataToObject
+						    (cache->object,
+						     cache->chunkId,
+						     cache->data, cache->nBytes,
+						     1);
+						cache->dirty = 0;
+					}
+
+				} else {
+					chunkWritten = -1;	/* fail the write */
+				}
+			} else {
+				/* An incomplete start or end chunk (or maybe both start and end chunk)
+				 * Read into the local buffer then copy, then copy over and write back.
+				 */
+
+				__u8 *localBuffer =
+				    yaffs_GetTempBuffer(dev, __LINE__);
+
+				yaffs_ReadChunkDataFromObject(in, chunk,
+							      localBuffer);
+
+#ifdef CONFIG_YAFFS_WINCE
+				yfsd_UnlockYAFFS(TRUE);
+#endif
+
+				memcpy(&localBuffer[start], buffer, nToCopy);
+
+#ifdef CONFIG_YAFFS_WINCE
+				yfsd_LockYAFFS(TRUE);
+#endif
+				chunkWritten =
+				    yaffs_WriteChunkDataToObject(in, chunk,
+								 localBuffer,
+								 nToWriteBack,
+								 0);
+
+				yaffs_ReleaseTempBuffer(dev, localBuffer,
+							__LINE__);
+
+			}
+
+		} else {
+
+#ifdef CONFIG_YAFFS_WINCE
+			/* Under WinCE can't do direct transfer. Need to use a local buffer.
+			 * This is because we otherwise screw up WinCE's memory mapper
+			 */
+			__u8 *localBuffer = yaffs_GetTempBuffer(dev, __LINE__);
+#ifdef CONFIG_YAFFS_WINCE
+			yfsd_UnlockYAFFS(TRUE);
+#endif
+			memcpy(localBuffer, buffer, dev->nDataBytesPerChunk);
+#ifdef CONFIG_YAFFS_WINCE
+			yfsd_LockYAFFS(TRUE);
+#endif
+			chunkWritten =
+			    yaffs_WriteChunkDataToObject(in, chunk, localBuffer,
+							 dev->nDataBytesPerChunk,
+							 0);
+			yaffs_ReleaseTempBuffer(dev, localBuffer, __LINE__);
+#else
+			/* A full chunk. Write directly from the supplied buffer. */
+			chunkWritten =
+			    yaffs_WriteChunkDataToObject(in, chunk, buffer,
+							 dev->nDataBytesPerChunk,
+							 0);
+#endif
+			/* Since we've overwritten the cached data, we better invalidate it. */
+			yaffs_InvalidateChunkCache(in, chunk);
+		}
+
+		if (chunkWritten >= 0) {
+			n -= nToCopy;
+			offset += nToCopy;
+			buffer += nToCopy;
+			nDone += nToCopy;
+		}
+
+	}
+
+	/* Update file object */
+
+	if ((startOfWrite + nDone) > in->variant.fileVariant.fileSize) {
+		in->variant.fileVariant.fileSize = (startOfWrite + nDone);
+	}
+
+	in->dirty = 1;
+
+	return nDone;
+}
+
+
+/* ---------------------- File resizing stuff ------------------ */
+
+static void yaffs_PruneResizedChunks(yaffs_Object * in, int newSize)
+{
+
+	yaffs_Device *dev = in->myDev;
+	int oldFileSize = in->variant.fileVariant.fileSize;
+
+	int lastDel = 1 + (oldFileSize - 1) / dev->nDataBytesPerChunk;
+
+	int startDel = 1 + (newSize + dev->nDataBytesPerChunk - 1) /
+	    dev->nDataBytesPerChunk;
+	int i;
+	int chunkId;
+
+	/* Delete backwards so that we don't end up with holes if
+	 * power is lost part-way through the operation.
+	 */
+	for (i = lastDel; i >= startDel; i--) {
+		/* NB this could be optimised somewhat,
+		 * eg. could retrieve the tags and write them without
+		 * using yaffs_DeleteChunk
+		 */
+
+		chunkId = yaffs_FindAndDeleteChunkInFile(in, i, NULL);
+		if (chunkId > 0) {
+			if (chunkId <
+			    (dev->internalStartBlock * dev->nChunksPerBlock)
+			    || chunkId >=
+			    ((dev->internalEndBlock +
+			      1) * dev->nChunksPerBlock)) {
+				T(YAFFS_TRACE_ALWAYS,
+				  (TSTR("Found daft chunkId %d for %d" TENDSTR),
+				   chunkId, i));
+			} else {
+				in->nDataChunks--;
+				yaffs_DeleteChunk(dev, chunkId, 1, __LINE__);
+			}
+		}
+	}
+
+}
+
+int yaffs_ResizeFile(yaffs_Object * in, loff_t newSize)
+{
+
+	int oldFileSize = in->variant.fileVariant.fileSize;
+	int newSizeOfPartialChunk;
+	int newFullChunks;
+
+	yaffs_Device *dev = in->myDev;
+
+	yaffs_AddrToChunk(dev, newSize, &newFullChunks, &newSizeOfPartialChunk);
+
+	yaffs_FlushFilesChunkCache(in);
+	yaffs_InvalidateWholeChunkCache(in);
+
+	yaffs_CheckGarbageCollection(dev);
+
+	if (in->variantType != YAFFS_OBJECT_TYPE_FILE) {
+		return yaffs_GetFileSize(in);
+	}
+
+	if (newSize == oldFileSize) {
+		return oldFileSize;
+	}
+
+	if (newSize < oldFileSize) {
+
+		yaffs_PruneResizedChunks(in, newSize);
+
+		if (newSizeOfPartialChunk != 0) {
+			int lastChunk = 1 + newFullChunks;
+
+			__u8 *localBuffer = yaffs_GetTempBuffer(dev, __LINE__);
+
+			/* Got to read and rewrite the last chunk with its new size and zero pad */
+			yaffs_ReadChunkDataFromObject(in, lastChunk,
+						      localBuffer);
+
+			memset(localBuffer + newSizeOfPartialChunk, 0,
+			       dev->nDataBytesPerChunk - newSizeOfPartialChunk);
+
+			yaffs_WriteChunkDataToObject(in, lastChunk, localBuffer,
+						     newSizeOfPartialChunk, 1);
+
+			yaffs_ReleaseTempBuffer(dev, localBuffer, __LINE__);
+		}
+
+		in->variant.fileVariant.fileSize = newSize;
+
+		yaffs_PruneFileStructure(dev, &in->variant.fileVariant);
+	} else {
+		/* newsSize > oldFileSize */
+		in->variant.fileVariant.fileSize = newSize;
+	}
+
+
+
+	/* Write a new object header.
+	 * show we've shrunk the file, if need be
+	 * Do this only if the file is not in the deleted directories.
+	 */
+	if (in->parent->objectId != YAFFS_OBJECTID_UNLINKED &&
+	    in->parent->objectId != YAFFS_OBJECTID_DELETED) {
+		yaffs_UpdateObjectHeader(in, NULL, 0,
+					 (newSize < oldFileSize) ? 1 : 0, 0);
+	}
+
+	return newSize;
+}
+
+loff_t yaffs_GetFileSize(yaffs_Object * obj)
+{
+	obj = yaffs_GetEquivalentObject(obj);
+
+	switch (obj->variantType) {
+	case YAFFS_OBJECT_TYPE_FILE:
+		return obj->variant.fileVariant.fileSize;
+	case YAFFS_OBJECT_TYPE_SYMLINK:
+		return yaffs_strlen(obj->variant.symLinkVariant.alias);
+	default:
+		return 0;
+	}
+}
+
+
+
+int yaffs_FlushFile(yaffs_Object * in, int updateTime)
+{
+	int retVal;
+	if (in->dirty) {
+		yaffs_FlushFilesChunkCache(in);
+		if (updateTime) {
+#ifdef CONFIG_YAFFS_WINCE
+			yfsd_WinFileTimeNow(in->win_mtime);
+#else
+
+			in->yst_mtime = Y_CURRENT_TIME;
+
+#endif
+		}
+
+		retVal =
+		    (yaffs_UpdateObjectHeader(in, NULL, 0, 0, 0) >=
+		     0) ? YAFFS_OK : YAFFS_FAIL;
+	} else {
+		retVal = YAFFS_OK;
+	}
+
+	return retVal;
+
+}
+
+static int yaffs_DoGenericObjectDeletion(yaffs_Object * in)
+{
+
+	/* First off, invalidate the file's data in the cache, without flushing. */
+	yaffs_InvalidateWholeChunkCache(in);
+
+	if (in->myDev->isYaffs2 && (in->parent != in->myDev->deletedDir)) {
+		/* Move to the unlinked directory so we have a record that it was deleted. */
+		yaffs_ChangeObjectName(in, in->myDev->deletedDir,"deleted", 0, 0);
+
+	}
+
+	yaffs_RemoveObjectFromDirectory(in);
+	yaffs_DeleteChunk(in->myDev, in->chunkId, 1, __LINE__);
+	in->chunkId = -1;
+
+	yaffs_FreeObject(in);
+	return YAFFS_OK;
+
+}
+
+/* yaffs_DeleteFile deletes the whole file data
+ * and the inode associated with the file.
+ * It does not delete the links associated with the file.
+ */
+static int yaffs_UnlinkFile(yaffs_Object * in)
+{
+
+	int retVal;
+	int immediateDeletion = 0;
+
+	if (1) {
+#ifdef __KERNEL__
+		if (!in->myInode) {
+			immediateDeletion = 1;
+
+		}
+#else
+		if (in->inUse <= 0) {
+			immediateDeletion = 1;
+
+		}
+#endif
+		if (immediateDeletion) {
+			retVal =
+			    yaffs_ChangeObjectName(in, in->myDev->deletedDir,
+						   "deleted", 0, 0);
+			T(YAFFS_TRACE_TRACING,
+			  (TSTR("yaffs: immediate deletion of file %d" TENDSTR),
+			   in->objectId));
+			in->deleted = 1;
+			in->myDev->nDeletedFiles++;
+			if (0 && in->myDev->isYaffs2) {
+				yaffs_ResizeFile(in, 0);
+			}
+			yaffs_SoftDeleteFile(in);
+		} else {
+			retVal =
+			    yaffs_ChangeObjectName(in, in->myDev->unlinkedDir,
+						   "unlinked", 0, 0);
+		}
+
+	}
+	return retVal;
+}
+
+int yaffs_DeleteFile(yaffs_Object * in)
+{
+	int retVal = YAFFS_OK;
+
+	if (in->nDataChunks > 0) {
+		/* Use soft deletion if there is data in the file */
+		if (!in->unlinked) {
+			retVal = yaffs_UnlinkFile(in);
+		}
+		if (retVal == YAFFS_OK && in->unlinked && !in->deleted) {
+			in->deleted = 1;
+			in->myDev->nDeletedFiles++;
+			yaffs_SoftDeleteFile(in);
+		}
+		return in->deleted ? YAFFS_OK : YAFFS_FAIL;
+	} else {
+		/* The file has no data chunks so we toss it immediately */
+		yaffs_FreeTnode(in->myDev, in->variant.fileVariant.top);
+		in->variant.fileVariant.top = NULL;
+		yaffs_DoGenericObjectDeletion(in);
+
+		return YAFFS_OK;
+	}
+}
+
+static int yaffs_DeleteDirectory(yaffs_Object * in)
+{
+	/* First check that the directory is empty. */
+	if (list_empty(&in->variant.directoryVariant.children)) {
+		return yaffs_DoGenericObjectDeletion(in);
+	}
+
+	return YAFFS_FAIL;
+
+}
+
+static int yaffs_DeleteSymLink(yaffs_Object * in)
+{
+	YFREE(in->variant.symLinkVariant.alias);
+
+	return yaffs_DoGenericObjectDeletion(in);
+}
+
+static int yaffs_DeleteHardLink(yaffs_Object * in)
+{
+	/* remove this hardlink from the list assocaited with the equivalent
+	 * object
+	 */
+	list_del(&in->hardLinks);
+	return yaffs_DoGenericObjectDeletion(in);
+}
+
+static void yaffs_DestroyObject(yaffs_Object * obj)
+{
+	switch (obj->variantType) {
+	case YAFFS_OBJECT_TYPE_FILE:
+		yaffs_DeleteFile(obj);
+		break;
+	case YAFFS_OBJECT_TYPE_DIRECTORY:
+		yaffs_DeleteDirectory(obj);
+		break;
+	case YAFFS_OBJECT_TYPE_SYMLINK:
+		yaffs_DeleteSymLink(obj);
+		break;
+	case YAFFS_OBJECT_TYPE_HARDLINK:
+		yaffs_DeleteHardLink(obj);
+		break;
+	case YAFFS_OBJECT_TYPE_SPECIAL:
+		yaffs_DoGenericObjectDeletion(obj);
+		break;
+	case YAFFS_OBJECT_TYPE_UNKNOWN:
+		break;		/* should not happen. */
+	}
+}
+
+static int yaffs_UnlinkWorker(yaffs_Object * obj)
+{
+
+	if (obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) {
+		return yaffs_DeleteHardLink(obj);
+	} else if (!list_empty(&obj->hardLinks)) {
+		/* Curve ball: We're unlinking an object that has a hardlink.
+		 *
+		 * This problem arises because we are not strictly following
+		 * The Linux link/inode model.
+		 *
+		 * We can't really delete the object.
+		 * Instead, we do the following:
+		 * - Select a hardlink.
+		 * - Unhook it from the hard links
+		 * - Unhook it from its parent directory (so that the rename can work)
+		 * - Rename the object to the hardlink's name.
+		 * - Delete the hardlink
+		 */
+
+		yaffs_Object *hl;
+		int retVal;
+		YCHAR name[YAFFS_MAX_NAME_LENGTH + 1];
+
+		hl = list_entry(obj->hardLinks.next, yaffs_Object, hardLinks);
+
+		list_del_init(&hl->hardLinks);
+		list_del_init(&hl->siblings);
+
+		yaffs_GetObjectName(hl, name, YAFFS_MAX_NAME_LENGTH + 1);
+
+		retVal = yaffs_ChangeObjectName(obj, hl->parent, name, 0, 0);
+
+		if (retVal == YAFFS_OK) {
+			retVal = yaffs_DoGenericObjectDeletion(hl);
+		}
+		return retVal;
+
+	} else {
+		switch (obj->variantType) {
+		case YAFFS_OBJECT_TYPE_FILE:
+			return yaffs_UnlinkFile(obj);
+			break;
+		case YAFFS_OBJECT_TYPE_DIRECTORY:
+			return yaffs_DeleteDirectory(obj);
+			break;
+		case YAFFS_OBJECT_TYPE_SYMLINK:
+			return yaffs_DeleteSymLink(obj);
+			break;
+		case YAFFS_OBJECT_TYPE_SPECIAL:
+			return yaffs_DoGenericObjectDeletion(obj);
+			break;
+		case YAFFS_OBJECT_TYPE_HARDLINK:
+		case YAFFS_OBJECT_TYPE_UNKNOWN:
+		default:
+			return YAFFS_FAIL;
+		}
+	}
+}
+
+
+static int yaffs_UnlinkObject( yaffs_Object *obj)
+{
+
+	if (obj && obj->unlinkAllowed) {
+		return yaffs_UnlinkWorker(obj);
+	}
+
+	return YAFFS_FAIL;
+
+}
+int yaffs_Unlink(yaffs_Object * dir, const YCHAR * name)
+{
+	yaffs_Object *obj;
+
+	obj = yaffs_FindObjectByName(dir, name);
+	return yaffs_UnlinkObject(obj);
+}
+
+/*----------------------- Initialisation Scanning ---------------------- */
+
+static void yaffs_HandleShadowedObject(yaffs_Device * dev, int objId,
+				       int backwardScanning)
+{
+	yaffs_Object *obj;
+
+	if (!backwardScanning) {
+		/* Handle YAFFS1 forward scanning case
+		 * For YAFFS1 we always do the deletion
+		 */
+
+	} else {
+		/* Handle YAFFS2 case (backward scanning)
+		 * If the shadowed object exists then ignore.
+		 */
+		if (yaffs_FindObjectByNumber(dev, objId)) {
+			return;
+		}
+	}
+
+	/* Let's create it (if it does not exist) assuming it is a file so that it can do shrinking etc.
+	 * We put it in unlinked dir to be cleaned up after the scanning
+	 */
+	obj =
+	    yaffs_FindOrCreateObjectByNumber(dev, objId,
+					     YAFFS_OBJECT_TYPE_FILE);
+	yaffs_AddObjectToDirectory(dev->unlinkedDir, obj);
+	obj->variant.fileVariant.shrinkSize = 0;
+	obj->valid = 1;		/* So that we don't read any other info for this file */
+
+}
+
+typedef struct {
+	int seq;
+	int block;
+} yaffs_BlockIndex;
+
+
+static void yaffs_HardlinkFixup(yaffs_Device *dev, yaffs_Object *hardList)
+{
+	yaffs_Object *hl;
+	yaffs_Object *in;
+
+	while (hardList) {
+		hl = hardList;
+		hardList = (yaffs_Object *) (hardList->hardLinks.next);
+
+		in = yaffs_FindObjectByNumber(dev,
+					      hl->variant.hardLinkVariant.
+					      equivalentObjectId);
+
+		if (in) {
+			/* Add the hardlink pointers */
+			hl->variant.hardLinkVariant.equivalentObject = in;
+			list_add(&hl->hardLinks, &in->hardLinks);
+		} else {
+			/* Todo Need to report/handle this better.
+			 * Got a problem... hardlink to a non-existant object
+			 */
+			hl->variant.hardLinkVariant.equivalentObject = NULL;
+			INIT_LIST_HEAD(&hl->hardLinks);
+
+		}
+
+	}
+
+}
+
+
+
+
+
+static int ybicmp(const void *a, const void *b){
+    register int aseq = ((yaffs_BlockIndex *)a)->seq;
+    register int bseq = ((yaffs_BlockIndex *)b)->seq;
+    register int ablock = ((yaffs_BlockIndex *)a)->block;
+    register int bblock = ((yaffs_BlockIndex *)b)->block;
+    if( aseq == bseq )
+        return ablock - bblock;
+    else
+        return aseq - bseq;
+
+}
+
+static int yaffs_Scan(yaffs_Device * dev)
+{
+	yaffs_ExtendedTags tags;
+	int blk;
+	int blockIterator;
+	int startIterator;
+	int endIterator;
+	int nBlocksToScan = 0;
+	int result;
+
+	int chunk;
+	int c;
+	int deleted;
+	yaffs_BlockState state;
+	yaffs_Object *hardList = NULL;
+	yaffs_BlockInfo *bi;
+	int sequenceNumber;
+	yaffs_ObjectHeader *oh;
+	yaffs_Object *in;
+	yaffs_Object *parent;
+	int nBlocks = dev->internalEndBlock - dev->internalStartBlock + 1;
+
+	int alloc_failed = 0;
+
+
+	__u8 *chunkData;
+
+	yaffs_BlockIndex *blockIndex = NULL;
+
+	if (dev->isYaffs2) {
+		T(YAFFS_TRACE_SCAN,
+		  (TSTR("yaffs_Scan is not for YAFFS2!" TENDSTR)));
+		return YAFFS_FAIL;
+	}
+
+	//TODO  Throw all the yaffs2 stuuf out of yaffs_Scan since it is only for yaffs1 format.
+
+	T(YAFFS_TRACE_SCAN,
+	  (TSTR("yaffs_Scan starts  intstartblk %d intendblk %d..." TENDSTR),
+	   dev->internalStartBlock, dev->internalEndBlock));
+
+	chunkData = yaffs_GetTempBuffer(dev, __LINE__);
+
+	dev->sequenceNumber = YAFFS_LOWEST_SEQUENCE_NUMBER;
+
+	if (dev->isYaffs2) {
+		blockIndex = YMALLOC(nBlocks * sizeof(yaffs_BlockIndex));
+		if(!blockIndex)
+			return YAFFS_FAIL;
+	}
+
+	/* Scan all the blocks to determine their state */
+	for (blk = dev->internalStartBlock; blk <= dev->internalEndBlock; blk++) {
+		bi = yaffs_GetBlockInfo(dev, blk);
+		yaffs_ClearChunkBits(dev, blk);
+		bi->pagesInUse = 0;
+		bi->softDeletions = 0;
+
+		yaffs_QueryInitialBlockState(dev, blk, &state, &sequenceNumber);
+
+		bi->blockState = state;
+		bi->sequenceNumber = sequenceNumber;
+
+		T(YAFFS_TRACE_SCAN_DEBUG,
+		  (TSTR("Block scanning block %d state %d seq %d" TENDSTR), blk,
+		   state, sequenceNumber));
+
+		if (state == YAFFS_BLOCK_STATE_DEAD) {
+			T(YAFFS_TRACE_BAD_BLOCKS,
+			  (TSTR("block %d is bad" TENDSTR), blk));
+		} else if (state == YAFFS_BLOCK_STATE_EMPTY) {
+			T(YAFFS_TRACE_SCAN_DEBUG,
+			  (TSTR("Block empty " TENDSTR)));
+			dev->nErasedBlocks++;
+			dev->nFreeChunks += dev->nChunksPerBlock;
+		} else if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING) {
+
+			/* Determine the highest sequence number */
+			if (dev->isYaffs2 &&
+			    sequenceNumber >= YAFFS_LOWEST_SEQUENCE_NUMBER &&
+			    sequenceNumber < YAFFS_HIGHEST_SEQUENCE_NUMBER) {
+
+				blockIndex[nBlocksToScan].seq = sequenceNumber;
+				blockIndex[nBlocksToScan].block = blk;
+
+				nBlocksToScan++;
+
+				if (sequenceNumber >= dev->sequenceNumber) {
+					dev->sequenceNumber = sequenceNumber;
+				}
+			} else if (dev->isYaffs2) {
+				/* TODO: Nasty sequence number! */
+				T(YAFFS_TRACE_SCAN,
+				  (TSTR
+				   ("Block scanning block %d has bad sequence number %d"
+				    TENDSTR), blk, sequenceNumber));
+
+			}
+		}
+	}
+
+	/* Sort the blocks
+	 * Dungy old bubble sort for now...
+	 */
+	if (dev->isYaffs2) {
+		yaffs_BlockIndex temp;
+		int i;
+		int j;
+
+		for (i = 0; i < nBlocksToScan; i++)
+			for (j = i + 1; j < nBlocksToScan; j++)
+				if (blockIndex[i].seq > blockIndex[j].seq) {
+					temp = blockIndex[j];
+					blockIndex[j] = blockIndex[i];
+					blockIndex[i] = temp;
+				}
+	}
+
+	/* Now scan the blocks looking at the data. */
+	if (dev->isYaffs2) {
+		startIterator = 0;
+		endIterator = nBlocksToScan - 1;
+		T(YAFFS_TRACE_SCAN_DEBUG,
+		  (TSTR("%d blocks to be scanned" TENDSTR), nBlocksToScan));
+	} else {
+		startIterator = dev->internalStartBlock;
+		endIterator = dev->internalEndBlock;
+	}
+
+	/* For each block.... */
+	for (blockIterator = startIterator; !alloc_failed && blockIterator <= endIterator;
+	     blockIterator++) {
+
+		if (dev->isYaffs2) {
+			/* get the block to scan in the correct order */
+			blk = blockIndex[blockIterator].block;
+		} else {
+			blk = blockIterator;
+		}
+
+		bi = yaffs_GetBlockInfo(dev, blk);
+		state = bi->blockState;
+
+		deleted = 0;
+
+		/* For each chunk in each block that needs scanning....*/
+		for (c = 0; !alloc_failed && c < dev->nChunksPerBlock &&
+		     state == YAFFS_BLOCK_STATE_NEEDS_SCANNING; c++) {
+			/* Read the tags and decide what to do */
+			chunk = blk * dev->nChunksPerBlock + c;
+
+			result = yaffs_ReadChunkWithTagsFromNAND(dev, chunk, NULL,
+							&tags);
+
+			/* Let's have a good look at this chunk... */
+
+			if (!dev->isYaffs2 && tags.chunkDeleted) {
+				/* YAFFS1 only...
+				 * A deleted chunk
+				 */
+				deleted++;
+				dev->nFreeChunks++;
+				/*T((" %d %d deleted\n",blk,c)); */
+			} else if (!tags.chunkUsed) {
+				/* An unassigned chunk in the block
+				 * This means that either the block is empty or
+				 * this is the one being allocated from
+				 */
+
+				if (c == 0) {
+					/* We're looking at the first chunk in the block so the block is unused */
+					state = YAFFS_BLOCK_STATE_EMPTY;
+					dev->nErasedBlocks++;
+				} else {
+					/* this is the block being allocated from */
+					T(YAFFS_TRACE_SCAN,
+					  (TSTR
+					   (" Allocating from %d %d" TENDSTR),
+					   blk, c));
+					state = YAFFS_BLOCK_STATE_ALLOCATING;
+					dev->allocationBlock = blk;
+					dev->allocationPage = c;
+					dev->allocationBlockFinder = blk;
+					/* Set it to here to encourage the allocator to go forth from here. */
+
+					/* Yaffs2 sanity check:
+					 * This should be the one with the highest sequence number
+					 */
+					if (dev->isYaffs2
+					    && (dev->sequenceNumber !=
+						bi->sequenceNumber)) {
+						T(YAFFS_TRACE_ALWAYS,
+						  (TSTR
+						   ("yaffs: Allocation block %d was not highest sequence id:"
+						    " block seq = %d, dev seq = %d"
+						    TENDSTR), blk,bi->sequenceNumber,dev->sequenceNumber));
+					}
+				}
+
+				dev->nFreeChunks += (dev->nChunksPerBlock - c);
+			} else if (tags.chunkId > 0) {
+				/* chunkId > 0 so it is a data chunk... */
+				unsigned int endpos;
+
+				yaffs_SetChunkBit(dev, blk, c);
+				bi->pagesInUse++;
+
+				in = yaffs_FindOrCreateObjectByNumber(dev,
+								      tags.
+								      objectId,
+								      YAFFS_OBJECT_TYPE_FILE);
+				/* PutChunkIntoFile checks for a clash (two data chunks with
+				 * the same chunkId).
+				 */
+
+				if(!in)
+					alloc_failed = 1;
+
+				if(in){
+					if(!yaffs_PutChunkIntoFile(in, tags.chunkId, chunk,1))
+						alloc_failed = 1;
+				}
+
+				endpos =
+				    (tags.chunkId - 1) * dev->nDataBytesPerChunk +
+				    tags.byteCount;
+				if (in &&
+				    in->variantType == YAFFS_OBJECT_TYPE_FILE
+				    && in->variant.fileVariant.scannedFileSize <
+				    endpos) {
+					in->variant.fileVariant.
+					    scannedFileSize = endpos;
+					if (!dev->useHeaderFileSize) {
+						in->variant.fileVariant.
+						    fileSize =
+						    in->variant.fileVariant.
+						    scannedFileSize;
+					}
+
+				}
+				/* T((" %d %d data %d %d\n",blk,c,tags.objectId,tags.chunkId));   */
+			} else {
+				/* chunkId == 0, so it is an ObjectHeader.
+				 * Thus, we read in the object header and make the object
+				 */
+				yaffs_SetChunkBit(dev, blk, c);
+				bi->pagesInUse++;
+
+				result = yaffs_ReadChunkWithTagsFromNAND(dev, chunk,
+								chunkData,
+								NULL);
+
+				oh = (yaffs_ObjectHeader *) chunkData;
+
+				in = yaffs_FindObjectByNumber(dev,
+							      tags.objectId);
+				if (in && in->variantType != oh->type) {
+					/* This should not happen, but somehow
+					 * Wev'e ended up with an objectId that has been reused but not yet
+					 * deleted, and worse still it has changed type. Delete the old object.
+					 */
+
+					yaffs_DestroyObject(in);
+
+					in = 0;
+				}
+
+				in = yaffs_FindOrCreateObjectByNumber(dev,
+								      tags.
+								      objectId,
+								      oh->type);
+
+				if(!in)
+					alloc_failed = 1;
+
+				if (in && oh->shadowsObject > 0) {
+					yaffs_HandleShadowedObject(dev,
+								   oh->
+								   shadowsObject,
+								   0);
+				}
+
+				if (in && in->valid) {
+					/* We have already filled this one. We have a duplicate and need to resolve it. */
+
+					unsigned existingSerial = in->serial;
+					unsigned newSerial = tags.serialNumber;
+
+					if (dev->isYaffs2 ||
+					    ((existingSerial + 1) & 3) ==
+					    newSerial) {
+						/* Use new one - destroy the exisiting one */
+						yaffs_DeleteChunk(dev,
+								  in->chunkId,
+								  1, __LINE__);
+						in->valid = 0;
+					} else {
+						/* Use existing - destroy this one. */
+						yaffs_DeleteChunk(dev, chunk, 1,
+								  __LINE__);
+					}
+				}
+
+				if (in && !in->valid &&
+				    (tags.objectId == YAFFS_OBJECTID_ROOT ||
+				     tags.objectId == YAFFS_OBJECTID_LOSTNFOUND)) {
+					/* We only load some info, don't fiddle with directory structure */
+					in->valid = 1;
+					in->variantType = oh->type;
+
+					in->yst_mode = oh->yst_mode;
+#ifdef CONFIG_YAFFS_WINCE
+					in->win_atime[0] = oh->win_atime[0];
+					in->win_ctime[0] = oh->win_ctime[0];
+					in->win_mtime[0] = oh->win_mtime[0];
+					in->win_atime[1] = oh->win_atime[1];
+					in->win_ctime[1] = oh->win_ctime[1];
+					in->win_mtime[1] = oh->win_mtime[1];
+#else
+					in->yst_uid = oh->yst_uid;
+					in->yst_gid = oh->yst_gid;
+					in->yst_atime = oh->yst_atime;
+					in->yst_mtime = oh->yst_mtime;
+					in->yst_ctime = oh->yst_ctime;
+					in->yst_rdev = oh->yst_rdev;
+#endif
+					in->chunkId = chunk;
+
+				} else if (in && !in->valid) {
+					/* we need to load this info */
+
+					in->valid = 1;
+					in->variantType = oh->type;
+
+					in->yst_mode = oh->yst_mode;
+#ifdef CONFIG_YAFFS_WINCE
+					in->win_atime[0] = oh->win_atime[0];
+					in->win_ctime[0] = oh->win_ctime[0];
+					in->win_mtime[0] = oh->win_mtime[0];
+					in->win_atime[1] = oh->win_atime[1];
+					in->win_ctime[1] = oh->win_ctime[1];
+					in->win_mtime[1] = oh->win_mtime[1];
+#else
+					in->yst_uid = oh->yst_uid;
+					in->yst_gid = oh->yst_gid;
+					in->yst_atime = oh->yst_atime;
+					in->yst_mtime = oh->yst_mtime;
+					in->yst_ctime = oh->yst_ctime;
+					in->yst_rdev = oh->yst_rdev;
+#endif
+					in->chunkId = chunk;
+
+					yaffs_SetObjectName(in, oh->name);
+					in->dirty = 0;
+
+					/* directory stuff...
+					 * hook up to parent
+					 */
+
+					parent =
+					    yaffs_FindOrCreateObjectByNumber
+					    (dev, oh->parentObjectId,
+					     YAFFS_OBJECT_TYPE_DIRECTORY);
+					if (parent->variantType ==
+					    YAFFS_OBJECT_TYPE_UNKNOWN) {
+						/* Set up as a directory */
+						parent->variantType =
+						    YAFFS_OBJECT_TYPE_DIRECTORY;
+						INIT_LIST_HEAD(&parent->variant.
+							       directoryVariant.
+							       children);
+					} else if (parent->variantType !=
+						   YAFFS_OBJECT_TYPE_DIRECTORY)
+					{
+						/* Hoosterman, another problem....
+						 * We're trying to use a non-directory as a directory
+						 */
+
+						T(YAFFS_TRACE_ERROR,
+						  (TSTR
+						   ("yaffs tragedy: attempting to use non-directory as"
+						    " a directory in scan. Put in lost+found."
+						    TENDSTR)));
+						parent = dev->lostNFoundDir;
+					}
+
+					yaffs_AddObjectToDirectory(parent, in);
+
+					if (0 && (parent == dev->deletedDir ||
+						  parent == dev->unlinkedDir)) {
+						in->deleted = 1;	/* If it is unlinked at start up then it wants deleting */
+						dev->nDeletedFiles++;
+					}
+					/* Note re hardlinks.
+					 * Since we might scan a hardlink before its equivalent object is scanned
+					 * we put them all in a list.
+					 * After scanning is complete, we should have all the objects, so we run through this
+					 * list and fix up all the chains.
+					 */
+
+					switch (in->variantType) {
+					case YAFFS_OBJECT_TYPE_UNKNOWN:
+						/* Todo got a problem */
+						break;
+					case YAFFS_OBJECT_TYPE_FILE:
+						if (dev->isYaffs2
+						    && oh->isShrink) {
+							/* Prune back the shrunken chunks */
+							yaffs_PruneResizedChunks
+							    (in, oh->fileSize);
+							/* Mark the block as having a shrinkHeader */
+							bi->hasShrinkHeader = 1;
+						}
+
+						if (dev->useHeaderFileSize)
+
+							in->variant.fileVariant.
+							    fileSize =
+							    oh->fileSize;
+
+						break;
+					case YAFFS_OBJECT_TYPE_HARDLINK:
+						in->variant.hardLinkVariant.
+						    equivalentObjectId =
+						    oh->equivalentObjectId;
+						in->hardLinks.next =
+						    (struct list_head *)
+						    hardList;
+						hardList = in;
+						break;
+					case YAFFS_OBJECT_TYPE_DIRECTORY:
+						/* Do nothing */
+						break;
+					case YAFFS_OBJECT_TYPE_SPECIAL:
+						/* Do nothing */
+						break;
+					case YAFFS_OBJECT_TYPE_SYMLINK:
+						in->variant.symLinkVariant.alias =
+						    yaffs_CloneString(oh->alias);
+						if(!in->variant.symLinkVariant.alias)
+							alloc_failed = 1;
+						break;
+					}
+
+					if (parent == dev->deletedDir) {
+						yaffs_DestroyObject(in);
+						bi->hasShrinkHeader = 1;
+					}
+				}
+			}
+		}
+
+		if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING) {
+			/* If we got this far while scanning, then the block is fully allocated.*/
+			state = YAFFS_BLOCK_STATE_FULL;
+		}
+
+		bi->blockState = state;
+
+		/* Now let's see if it was dirty */
+		if (bi->pagesInUse == 0 &&
+		    !bi->hasShrinkHeader &&
+		    bi->blockState == YAFFS_BLOCK_STATE_FULL) {
+			yaffs_BlockBecameDirty(dev, blk);
+		}
+
+	}
+
+	if (blockIndex) {
+		YFREE(blockIndex);
+	}
+
+
+	/* Ok, we've done all the scanning.
+	 * Fix up the hard link chains.
+	 * We should now have scanned all the objects, now it's time to add these
+	 * hardlinks.
+	 */
+
+	yaffs_HardlinkFixup(dev,hardList);
+
+	/* Handle the unlinked files. Since they were left in an unlinked state we should
+	 * just delete them.
+	 */
+	{
+		struct list_head *i;
+		struct list_head *n;
+
+		yaffs_Object *l;
+		/* Soft delete all the unlinked files */
+		list_for_each_safe(i, n,
+				   &dev->unlinkedDir->variant.directoryVariant.
+				   children) {
+			if (i) {
+				l = list_entry(i, yaffs_Object, siblings);
+				yaffs_DestroyObject(l);
+			}
+		}
+	}
+
+	yaffs_ReleaseTempBuffer(dev, chunkData, __LINE__);
+
+	if(alloc_failed){
+		return YAFFS_FAIL;
+	}
+
+	T(YAFFS_TRACE_SCAN, (TSTR("yaffs_Scan ends" TENDSTR)));
+
+
+	return YAFFS_OK;
+}
+
+static void yaffs_CheckObjectDetailsLoaded(yaffs_Object *in)
+{
+	__u8 *chunkData;
+	yaffs_ObjectHeader *oh;
+	yaffs_Device *dev = in->myDev;
+	yaffs_ExtendedTags tags;
+	int result;
+	int alloc_failed = 0;
+
+	if(!in)
+		return;
+
+#if 0
+	T(YAFFS_TRACE_SCAN,(TSTR("details for object %d %s loaded" TENDSTR),
+		in->objectId,
+		in->lazyLoaded ? "not yet" : "already"));
+#endif
+
+	if(in->lazyLoaded){
+		in->lazyLoaded = 0;
+		chunkData = yaffs_GetTempBuffer(dev, __LINE__);
+
+		result = yaffs_ReadChunkWithTagsFromNAND(dev,in->chunkId,chunkData,&tags);
+		oh = (yaffs_ObjectHeader *) chunkData;
+
+		in->yst_mode = oh->yst_mode;
+#ifdef CONFIG_YAFFS_WINCE
+		in->win_atime[0] = oh->win_atime[0];
+		in->win_ctime[0] = oh->win_ctime[0];
+		in->win_mtime[0] = oh->win_mtime[0];
+		in->win_atime[1] = oh->win_atime[1];
+		in->win_ctime[1] = oh->win_ctime[1];
+		in->win_mtime[1] = oh->win_mtime[1];
+#else
+		in->yst_uid = oh->yst_uid;
+		in->yst_gid = oh->yst_gid;
+		in->yst_atime = oh->yst_atime;
+		in->yst_mtime = oh->yst_mtime;
+		in->yst_ctime = oh->yst_ctime;
+		in->yst_rdev = oh->yst_rdev;
+
+#endif
+		yaffs_SetObjectName(in, oh->name);
+
+		if(in->variantType == YAFFS_OBJECT_TYPE_SYMLINK){
+			 in->variant.symLinkVariant.alias =
+						    yaffs_CloneString(oh->alias);
+			if(!in->variant.symLinkVariant.alias)
+				alloc_failed = 1; /* Not returned to caller */
+		}
+
+		yaffs_ReleaseTempBuffer(dev,chunkData, __LINE__);
+	}
+}
+
+static int yaffs_ScanBackwards(yaffs_Device * dev)
+{
+	yaffs_ExtendedTags tags;
+	int blk;
+	int blockIterator;
+	int startIterator;
+	int endIterator;
+	int nBlocksToScan = 0;
+
+	int chunk;
+	int result;
+	int c;
+	int deleted;
+	yaffs_BlockState state;
+	yaffs_Object *hardList = NULL;
+	yaffs_BlockInfo *bi;
+	int sequenceNumber;
+	yaffs_ObjectHeader *oh;
+	yaffs_Object *in;
+	yaffs_Object *parent;
+	int nBlocks = dev->internalEndBlock - dev->internalStartBlock + 1;
+	int itsUnlinked;
+	__u8 *chunkData;
+
+	int fileSize;
+	int isShrink;
+	int foundChunksInBlock;
+	int equivalentObjectId;
+	int alloc_failed = 0;
+
+
+	yaffs_BlockIndex *blockIndex = NULL;
+	int altBlockIndex = 0;
+
+	if (!dev->isYaffs2) {
+		T(YAFFS_TRACE_SCAN,
+		  (TSTR("yaffs_ScanBackwards is only for YAFFS2!" TENDSTR)));
+		return YAFFS_FAIL;
+	}
+
+	T(YAFFS_TRACE_SCAN,
+	  (TSTR
+	   ("yaffs_ScanBackwards starts  intstartblk %d intendblk %d..."
+	    TENDSTR), dev->internalStartBlock, dev->internalEndBlock));
+
+
+	dev->sequenceNumber = YAFFS_LOWEST_SEQUENCE_NUMBER;
+
+	blockIndex = YMALLOC(nBlocks * sizeof(yaffs_BlockIndex));
+
+	if(!blockIndex) {
+		blockIndex = YMALLOC_ALT(nBlocks * sizeof(yaffs_BlockIndex));
+		altBlockIndex = 1;
+	}
+
+	if(!blockIndex) {
+		T(YAFFS_TRACE_SCAN,
+		  (TSTR("yaffs_Scan() could not allocate block index!" TENDSTR)));
+		return YAFFS_FAIL;
+	}
+
+	dev->blocksInCheckpoint = 0;
+
+	chunkData = yaffs_GetTempBuffer(dev, __LINE__);
+
+	/* Scan all the blocks to determine their state */
+	for (blk = dev->internalStartBlock; blk <= dev->internalEndBlock; blk++) {
+		bi = yaffs_GetBlockInfo(dev, blk);
+		yaffs_ClearChunkBits(dev, blk);
+		bi->pagesInUse = 0;
+		bi->softDeletions = 0;
+
+		yaffs_QueryInitialBlockState(dev, blk, &state, &sequenceNumber);
+
+		bi->blockState = state;
+		bi->sequenceNumber = sequenceNumber;
+
+		if(bi->sequenceNumber == YAFFS_SEQUENCE_CHECKPOINT_DATA)
+			bi->blockState = state = YAFFS_BLOCK_STATE_CHECKPOINT;
+
+		T(YAFFS_TRACE_SCAN_DEBUG,
+		  (TSTR("Block scanning block %d state %d seq %d" TENDSTR), blk,
+		   state, sequenceNumber));
+
+
+		if(state == YAFFS_BLOCK_STATE_CHECKPOINT){
+			dev->blocksInCheckpoint++;
+
+		} else if (state == YAFFS_BLOCK_STATE_DEAD) {
+			T(YAFFS_TRACE_BAD_BLOCKS,
+			  (TSTR("block %d is bad" TENDSTR), blk));
+		} else if (state == YAFFS_BLOCK_STATE_EMPTY) {
+			T(YAFFS_TRACE_SCAN_DEBUG,
+			  (TSTR("Block empty " TENDSTR)));
+			dev->nErasedBlocks++;
+			dev->nFreeChunks += dev->nChunksPerBlock;
+		} else if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING) {
+
+			/* Determine the highest sequence number */
+			if (dev->isYaffs2 &&
+			    sequenceNumber >= YAFFS_LOWEST_SEQUENCE_NUMBER &&
+			    sequenceNumber < YAFFS_HIGHEST_SEQUENCE_NUMBER) {
+
+				blockIndex[nBlocksToScan].seq = sequenceNumber;
+				blockIndex[nBlocksToScan].block = blk;
+
+				nBlocksToScan++;
+
+				if (sequenceNumber >= dev->sequenceNumber) {
+					dev->sequenceNumber = sequenceNumber;
+				}
+			} else if (dev->isYaffs2) {
+				/* TODO: Nasty sequence number! */
+				T(YAFFS_TRACE_SCAN,
+				  (TSTR
+				   ("Block scanning block %d has bad sequence number %d"
+				    TENDSTR), blk, sequenceNumber));
+
+			}
+		}
+	}
+
+	T(YAFFS_TRACE_SCAN,
+	(TSTR("%d blocks to be sorted..." TENDSTR), nBlocksToScan));
+
+
+
+	YYIELD();
+
+	/* Sort the blocks */
+#ifndef CONFIG_YAFFS_USE_OWN_SORT
+	yaffs_qsort(blockIndex, nBlocksToScan,
+		sizeof(yaffs_BlockIndex), ybicmp);
+#else
+	{
+	 	/* Dungy old bubble sort... */
+
+		yaffs_BlockIndex temp;
+		int i;
+		int j;
+
+		for (i = 0; i < nBlocksToScan; i++)
+			for (j = i + 1; j < nBlocksToScan; j++)
+				if (blockIndex[i].seq > blockIndex[j].seq) {
+					temp = blockIndex[j];
+					blockIndex[j] = blockIndex[i];
+					blockIndex[i] = temp;
+				}
+	}
+#endif
+
+	YYIELD();
+
+    	T(YAFFS_TRACE_SCAN, (TSTR("...done" TENDSTR)));
+
+	/* Now scan the blocks looking at the data. */
+	startIterator = 0;
+	endIterator = nBlocksToScan - 1;
+	T(YAFFS_TRACE_SCAN_DEBUG,
+	  (TSTR("%d blocks to be scanned" TENDSTR), nBlocksToScan));
+
+	/* For each block.... backwards */
+	for (blockIterator = endIterator; !alloc_failed && blockIterator >= startIterator;
+	     blockIterator--) {
+	        /* Cooperative multitasking! This loop can run for so
+		   long that watchdog timers expire. */
+	        YYIELD();
+
+		/* get the block to scan in the correct order */
+		blk = blockIndex[blockIterator].block;
+
+		bi = yaffs_GetBlockInfo(dev, blk);
+
+
+		state = bi->blockState;
+
+		deleted = 0;
+
+		/* For each chunk in each block that needs scanning.... */
+		foundChunksInBlock = 0;
+		for (c = dev->nChunksPerBlock - 1;
+		     !alloc_failed && c >= 0 &&
+		     (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING ||
+		      state == YAFFS_BLOCK_STATE_ALLOCATING); c--) {
+			/* Scan backwards...
+			 * Read the tags and decide what to do
+			 */
+
+			chunk = blk * dev->nChunksPerBlock + c;
+
+			result = yaffs_ReadChunkWithTagsFromNAND(dev, chunk, NULL,
+							&tags);
+
+			/* Let's have a good look at this chunk... */
+
+			if (!tags.chunkUsed) {
+				/* An unassigned chunk in the block.
+				 * If there are used chunks after this one, then
+				 * it is a chunk that was skipped due to failing the erased
+				 * check. Just skip it so that it can be deleted.
+				 * But, more typically, We get here when this is an unallocated
+				 * chunk and his means that either the block is empty or
+				 * this is the one being allocated from
+				 */
+
+				if(foundChunksInBlock)
+				{
+					/* This is a chunk that was skipped due to failing the erased check */
+
+				} else if (c == 0) {
+					/* We're looking at the first chunk in the block so the block is unused */
+					state = YAFFS_BLOCK_STATE_EMPTY;
+					dev->nErasedBlocks++;
+				} else {
+					if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING ||
+					    state == YAFFS_BLOCK_STATE_ALLOCATING) {
+					    	if(dev->sequenceNumber == bi->sequenceNumber) {
+							/* this is the block being allocated from */
+
+							T(YAFFS_TRACE_SCAN,
+							  (TSTR
+							   (" Allocating from %d %d"
+							    TENDSTR), blk, c));
+
+							state = YAFFS_BLOCK_STATE_ALLOCATING;
+							dev->allocationBlock = blk;
+							dev->allocationPage = c;
+							dev->allocationBlockFinder = blk;
+						}
+						else {
+							/* This is a partially written block that is not
+							 * the current allocation block. This block must have
+							 * had a write failure, so set up for retirement.
+							 */
+
+							 bi->needsRetiring = 1;
+							 bi->gcPrioritise = 1;
+
+							 T(YAFFS_TRACE_ALWAYS,
+							 (TSTR("Partially written block %d being set for retirement" TENDSTR),
+							 blk));
+						}
+
+					}
+
+				}
+
+				dev->nFreeChunks++;
+
+			} else if (tags.chunkId > 0) {
+				/* chunkId > 0 so it is a data chunk... */
+				unsigned int endpos;
+				__u32 chunkBase =
+				    (tags.chunkId - 1) * dev->nDataBytesPerChunk;
+
+				foundChunksInBlock = 1;
+
+
+				yaffs_SetChunkBit(dev, blk, c);
+				bi->pagesInUse++;
+
+				in = yaffs_FindOrCreateObjectByNumber(dev,
+								      tags.
+								      objectId,
+								      YAFFS_OBJECT_TYPE_FILE);
+				if(!in){
+					/* Out of memory */
+					alloc_failed = 1;
+				}
+
+				if (in &&
+				    in->variantType == YAFFS_OBJECT_TYPE_FILE
+				    && chunkBase <
+				    in->variant.fileVariant.shrinkSize) {
+					/* This has not been invalidated by a resize */
+					if(!yaffs_PutChunkIntoFile(in, tags.chunkId,
+							       chunk, -1)){
+						alloc_failed = 1;
+					}
+
+					/* File size is calculated by looking at the data chunks if we have not
+					 * seen an object header yet. Stop this practice once we find an object header.
+					 */
+					endpos =
+					    (tags.chunkId -
+					     1) * dev->nDataBytesPerChunk +
+					    tags.byteCount;
+
+					if (!in->valid &&	/* have not got an object header yet */
+					    in->variant.fileVariant.
+					    scannedFileSize < endpos) {
+						in->variant.fileVariant.
+						    scannedFileSize = endpos;
+						in->variant.fileVariant.
+						    fileSize =
+						    in->variant.fileVariant.
+						    scannedFileSize;
+					}
+
+				} else if(in) {
+					/* This chunk has been invalidated by a resize, so delete */
+					yaffs_DeleteChunk(dev, chunk, 1, __LINE__);
+
+				}
+			} else {
+				/* chunkId == 0, so it is an ObjectHeader.
+				 * Thus, we read in the object header and make the object
+				 */
+				foundChunksInBlock = 1;
+
+				yaffs_SetChunkBit(dev, blk, c);
+				bi->pagesInUse++;
+
+				oh = NULL;
+				in = NULL;
+
+				if (tags.extraHeaderInfoAvailable) {
+					in = yaffs_FindOrCreateObjectByNumber
+					    (dev, tags.objectId,
+					     tags.extraObjectType);
+				}
+
+				if (!in ||
+#ifdef CONFIG_YAFFS_DISABLE_LAZY_LOAD
+				    !in->valid ||
+#endif
+				    tags.extraShadows ||
+				    (!in->valid &&
+				    (tags.objectId == YAFFS_OBJECTID_ROOT ||
+				     tags.objectId == YAFFS_OBJECTID_LOSTNFOUND))
+				    ) {
+
+					/* If we don't have  valid info then we need to read the chunk
+					 * TODO In future we can probably defer reading the chunk and
+					 * living with invalid data until needed.
+					 */
+
+					result = yaffs_ReadChunkWithTagsFromNAND(dev,
+									chunk,
+									chunkData,
+									NULL);
+
+					oh = (yaffs_ObjectHeader *) chunkData;
+
+					if (!in)
+						in = yaffs_FindOrCreateObjectByNumber(dev, tags.objectId, oh->type);
+
+				}
+
+				if (!in) {
+					/* TODO Hoosterman we have a problem! */
+					T(YAFFS_TRACE_ERROR,
+					  (TSTR
+					   ("yaffs tragedy: Could not make object for object  %d  "
+					    "at chunk %d during scan"
+					    TENDSTR), tags.objectId, chunk));
+
+				}
+
+				if (in->valid) {
+					/* We have already filled this one.
+					 * We have a duplicate that will be discarded, but
+					 * we first have to suck out resize info if it is a file.
+					 */
+
+					if ((in->variantType == YAFFS_OBJECT_TYPE_FILE) &&
+					     ((oh &&
+					       oh-> type == YAFFS_OBJECT_TYPE_FILE)||
+					      (tags.extraHeaderInfoAvailable  &&
+					       tags.extraObjectType == YAFFS_OBJECT_TYPE_FILE))
+					    ) {
+						__u32 thisSize =
+						    (oh) ? oh->fileSize : tags.
+						    extraFileLength;
+						__u32 parentObjectId =
+						    (oh) ? oh->
+						    parentObjectId : tags.
+						    extraParentObjectId;
+						unsigned isShrink =
+						    (oh) ? oh->isShrink : tags.
+						    extraIsShrinkHeader;
+
+						/* If it is deleted (unlinked at start also means deleted)
+						 * we treat the file size as being zeroed at this point.
+						 */
+						if (parentObjectId ==
+						    YAFFS_OBJECTID_DELETED
+						    || parentObjectId ==
+						    YAFFS_OBJECTID_UNLINKED) {
+							thisSize = 0;
+							isShrink = 1;
+						}
+
+						if (isShrink &&
+						    in->variant.fileVariant.
+						    shrinkSize > thisSize) {
+							in->variant.fileVariant.
+							    shrinkSize =
+							    thisSize;
+						}
+
+						if (isShrink) {
+							bi->hasShrinkHeader = 1;
+						}
+
+					}
+					/* Use existing - destroy this one. */
+					yaffs_DeleteChunk(dev, chunk, 1, __LINE__);
+
+				}
+
+				if (!in->valid &&
+				    (tags.objectId == YAFFS_OBJECTID_ROOT ||
+				     tags.objectId ==
+				     YAFFS_OBJECTID_LOSTNFOUND)) {
+					/* We only load some info, don't fiddle with directory structure */
+					in->valid = 1;
+
+					if(oh) {
+						in->variantType = oh->type;
+
+						in->yst_mode = oh->yst_mode;
+#ifdef CONFIG_YAFFS_WINCE
+						in->win_atime[0] = oh->win_atime[0];
+						in->win_ctime[0] = oh->win_ctime[0];
+						in->win_mtime[0] = oh->win_mtime[0];
+						in->win_atime[1] = oh->win_atime[1];
+						in->win_ctime[1] = oh->win_ctime[1];
+						in->win_mtime[1] = oh->win_mtime[1];
+#else
+						in->yst_uid = oh->yst_uid;
+						in->yst_gid = oh->yst_gid;
+						in->yst_atime = oh->yst_atime;
+						in->yst_mtime = oh->yst_mtime;
+						in->yst_ctime = oh->yst_ctime;
+						in->yst_rdev = oh->yst_rdev;
+
+#endif
+					} else {
+						in->variantType = tags.extraObjectType;
+						in->lazyLoaded = 1;
+					}
+
+					in->chunkId = chunk;
+
+				} else if (!in->valid) {
+					/* we need to load this info */
+
+					in->valid = 1;
+					in->chunkId = chunk;
+
+					if(oh) {
+						in->variantType = oh->type;
+
+						in->yst_mode = oh->yst_mode;
+#ifdef CONFIG_YAFFS_WINCE
+						in->win_atime[0] = oh->win_atime[0];
+						in->win_ctime[0] = oh->win_ctime[0];
+						in->win_mtime[0] = oh->win_mtime[0];
+						in->win_atime[1] = oh->win_atime[1];
+						in->win_ctime[1] = oh->win_ctime[1];
+						in->win_mtime[1] = oh->win_mtime[1];
+#else
+						in->yst_uid = oh->yst_uid;
+						in->yst_gid = oh->yst_gid;
+						in->yst_atime = oh->yst_atime;
+						in->yst_mtime = oh->yst_mtime;
+						in->yst_ctime = oh->yst_ctime;
+						in->yst_rdev = oh->yst_rdev;
+#endif
+
+						if (oh->shadowsObject > 0)
+							yaffs_HandleShadowedObject(dev,
+									   oh->
+									   shadowsObject,
+									   1);
+
+
+						yaffs_SetObjectName(in, oh->name);
+						parent =
+						    yaffs_FindOrCreateObjectByNumber
+					    		(dev, oh->parentObjectId,
+					     		 YAFFS_OBJECT_TYPE_DIRECTORY);
+
+						 fileSize = oh->fileSize;
+ 						 isShrink = oh->isShrink;
+						 equivalentObjectId = oh->equivalentObjectId;
+
+					}
+					else {
+						in->variantType = tags.extraObjectType;
+						parent =
+						    yaffs_FindOrCreateObjectByNumber
+					    		(dev, tags.extraParentObjectId,
+					     		 YAFFS_OBJECT_TYPE_DIRECTORY);
+						 fileSize = tags.extraFileLength;
+						 isShrink = tags.extraIsShrinkHeader;
+						 equivalentObjectId = tags.extraEquivalentObjectId;
+						in->lazyLoaded = 1;
+
+					}
+					in->dirty = 0;
+
+					/* directory stuff...
+					 * hook up to parent
+					 */
+
+					if (parent->variantType ==
+					    YAFFS_OBJECT_TYPE_UNKNOWN) {
+						/* Set up as a directory */
+						parent->variantType =
+						    YAFFS_OBJECT_TYPE_DIRECTORY;
+						INIT_LIST_HEAD(&parent->variant.
+							       directoryVariant.
+							       children);
+					} else if (parent->variantType !=
+						   YAFFS_OBJECT_TYPE_DIRECTORY)
+					{
+						/* Hoosterman, another problem....
+						 * We're trying to use a non-directory as a directory
+						 */
+
+						T(YAFFS_TRACE_ERROR,
+						  (TSTR
+						   ("yaffs tragedy: attempting to use non-directory as"
+						    " a directory in scan. Put in lost+found."
+						    TENDSTR)));
+						parent = dev->lostNFoundDir;
+					}
+
+					yaffs_AddObjectToDirectory(parent, in);
+
+					itsUnlinked = (parent == dev->deletedDir) ||
+						      (parent == dev->unlinkedDir);
+
+					if (isShrink) {
+						/* Mark the block as having a shrinkHeader */
+						bi->hasShrinkHeader = 1;
+					}
+
+					/* Note re hardlinks.
+					 * Since we might scan a hardlink before its equivalent object is scanned
+					 * we put them all in a list.
+					 * After scanning is complete, we should have all the objects, so we run
+					 * through this list and fix up all the chains.
+					 */
+
+					switch (in->variantType) {
+					case YAFFS_OBJECT_TYPE_UNKNOWN:
+						/* Todo got a problem */
+						break;
+					case YAFFS_OBJECT_TYPE_FILE:
+
+						if (in->variant.fileVariant.
+						    scannedFileSize < fileSize) {
+							/* This covers the case where the file size is greater
+							 * than where the data is
+							 * This will happen if the file is resized to be larger
+							 * than its current data extents.
+							 */
+							in->variant.fileVariant.fileSize = fileSize;
+							in->variant.fileVariant.scannedFileSize =
+							    in->variant.fileVariant.fileSize;
+						}
+
+						if (isShrink &&
+						    in->variant.fileVariant.shrinkSize > fileSize) {
+							in->variant.fileVariant.shrinkSize = fileSize;
+						}
+
+						break;
+					case YAFFS_OBJECT_TYPE_HARDLINK:
+						if(!itsUnlinked) {
+						  in->variant.hardLinkVariant.equivalentObjectId =
+						    equivalentObjectId;
+						  in->hardLinks.next =
+						    (struct list_head *) hardList;
+						  hardList = in;
+						}
+						break;
+					case YAFFS_OBJECT_TYPE_DIRECTORY:
+						/* Do nothing */
+						break;
+					case YAFFS_OBJECT_TYPE_SPECIAL:
+						/* Do nothing */
+						break;
+					case YAFFS_OBJECT_TYPE_SYMLINK:
+						if(oh){
+						   in->variant.symLinkVariant.alias =
+						    yaffs_CloneString(oh->
+								      alias);
+						   if(!in->variant.symLinkVariant.alias)
+						   	alloc_failed = 1;
+						}
+						break;
+					}
+
+				}
+
+			}
+
+		} /* End of scanning for each chunk */
+
+		if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING) {
+			/* If we got this far while scanning, then the block is fully allocated. */
+			state = YAFFS_BLOCK_STATE_FULL;
+		}
+
+		bi->blockState = state;
+
+		/* Now let's see if it was dirty */
+		if (bi->pagesInUse == 0 &&
+		    !bi->hasShrinkHeader &&
+		    bi->blockState == YAFFS_BLOCK_STATE_FULL) {
+			yaffs_BlockBecameDirty(dev, blk);
+		}
+
+	}
+
+	if (altBlockIndex)
+		YFREE_ALT(blockIndex);
+	else
+		YFREE(blockIndex);
+
+	/* Ok, we've done all the scanning.
+	 * Fix up the hard link chains.
+	 * We should now have scanned all the objects, now it's time to add these
+	 * hardlinks.
+	 */
+	yaffs_HardlinkFixup(dev,hardList);
+
+
+	/*
+	*  Sort out state of unlinked and deleted objects.
+	*/
+	{
+		struct list_head *i;
+		struct list_head *n;
+
+		yaffs_Object *l;
+
+		/* Soft delete all the unlinked files */
+		list_for_each_safe(i, n,
+				   &dev->unlinkedDir->variant.directoryVariant.
+				   children) {
+			if (i) {
+				l = list_entry(i, yaffs_Object, siblings);
+				yaffs_DestroyObject(l);
+			}
+		}
+
+		/* Soft delete all the deletedDir files */
+		list_for_each_safe(i, n,
+				   &dev->deletedDir->variant.directoryVariant.
+				   children) {
+			if (i) {
+				l = list_entry(i, yaffs_Object, siblings);
+				yaffs_DestroyObject(l);
+
+			}
+		}
+	}
+
+	yaffs_ReleaseTempBuffer(dev, chunkData, __LINE__);
+
+	if(alloc_failed){
+		return YAFFS_FAIL;
+	}
+
+	T(YAFFS_TRACE_SCAN, (TSTR("yaffs_ScanBackwards ends" TENDSTR)));
+
+	return YAFFS_OK;
+}
+
+/*------------------------------  Directory Functions ----------------------------- */
+
+static void yaffs_RemoveObjectFromDirectory(yaffs_Object * obj)
+{
+	yaffs_Device *dev = obj->myDev;
+
+	if(dev && dev->removeObjectCallback)
+		dev->removeObjectCallback(obj);
+
+	list_del_init(&obj->siblings);
+	obj->parent = NULL;
+}
+
+
+static void yaffs_AddObjectToDirectory(yaffs_Object * directory,
+				       yaffs_Object * obj)
+{
+
+	if (!directory) {
+		T(YAFFS_TRACE_ALWAYS,
+		  (TSTR
+		   ("tragedy: Trying to add an object to a null pointer directory"
+		    TENDSTR)));
+		YBUG();
+	}
+	if (directory->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+		T(YAFFS_TRACE_ALWAYS,
+		  (TSTR
+		   ("tragedy: Trying to add an object to a non-directory"
+		    TENDSTR)));
+		YBUG();
+	}
+
+	if (obj->siblings.prev == NULL) {
+		/* Not initialised */
+		INIT_LIST_HEAD(&obj->siblings);
+
+	} else if (!list_empty(&obj->siblings)) {
+		/* If it is holed up somewhere else, un hook it */
+		yaffs_RemoveObjectFromDirectory(obj);
+	}
+	/* Now add it */
+	list_add(&obj->siblings, &directory->variant.directoryVariant.children);
+	obj->parent = directory;
+
+	if (directory == obj->myDev->unlinkedDir
+	    || directory == obj->myDev->deletedDir) {
+		obj->unlinked = 1;
+		obj->myDev->nUnlinkedFiles++;
+		obj->renameAllowed = 0;
+	}
+}
+
+yaffs_Object *yaffs_FindObjectByName(yaffs_Object * directory,
+				     const YCHAR * name)
+{
+	int sum;
+
+	struct list_head *i;
+	YCHAR buffer[YAFFS_MAX_NAME_LENGTH + 1];
+
+	yaffs_Object *l;
+
+	if (!name) {
+		return NULL;
+	}
+
+	if (!directory) {
+		T(YAFFS_TRACE_ALWAYS,
+		  (TSTR
+		   ("tragedy: yaffs_FindObjectByName: null pointer directory"
+		    TENDSTR)));
+		YBUG();
+	}
+	if (directory->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+		T(YAFFS_TRACE_ALWAYS,
+		  (TSTR
+		   ("tragedy: yaffs_FindObjectByName: non-directory" TENDSTR)));
+		YBUG();
+	}
+
+	sum = yaffs_CalcNameSum(name);
+
+	list_for_each(i, &directory->variant.directoryVariant.children) {
+		if (i) {
+			l = list_entry(i, yaffs_Object, siblings);
+
+			yaffs_CheckObjectDetailsLoaded(l);
+
+			/* Special case for lost-n-found */
+			if (l->objectId == YAFFS_OBJECTID_LOSTNFOUND) {
+				if (yaffs_strcmp(name, YAFFS_LOSTNFOUND_NAME) == 0) {
+					return l;
+				}
+			} else if (yaffs_SumCompare(l->sum, sum) || l->chunkId <= 0)
+			{
+				/* LostnFound cunk called Objxxx
+				 * Do a real check
+				 */
+				yaffs_GetObjectName(l, buffer,
+						    YAFFS_MAX_NAME_LENGTH);
+				if (yaffs_strncmp(name, buffer,YAFFS_MAX_NAME_LENGTH) == 0) {
+					return l;
+				}
+
+			}
+		}
+	}
+
+	return NULL;
+}
+
+
+#if 0
+int yaffs_ApplyToDirectoryChildren(yaffs_Object * theDir,
+				   int (*fn) (yaffs_Object *))
+{
+	struct list_head *i;
+	yaffs_Object *l;
+
+	if (!theDir) {
+		T(YAFFS_TRACE_ALWAYS,
+		  (TSTR
+		   ("tragedy: yaffs_FindObjectByName: null pointer directory"
+		    TENDSTR)));
+		YBUG();
+	}
+	if (theDir->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+		T(YAFFS_TRACE_ALWAYS,
+		  (TSTR
+		   ("tragedy: yaffs_FindObjectByName: non-directory" TENDSTR)));
+		YBUG();
+	}
+
+	list_for_each(i, &theDir->variant.directoryVariant.children) {
+		if (i) {
+			l = list_entry(i, yaffs_Object, siblings);
+			if (l && !fn(l)) {
+				return YAFFS_FAIL;
+			}
+		}
+	}
+
+	return YAFFS_OK;
+
+}
+#endif
+
+/* GetEquivalentObject dereferences any hard links to get to the
+ * actual object.
+ */
+
+yaffs_Object *yaffs_GetEquivalentObject(yaffs_Object * obj)
+{
+	if (obj && obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) {
+		/* We want the object id of the equivalent object, not this one */
+		obj = obj->variant.hardLinkVariant.equivalentObject;
+		yaffs_CheckObjectDetailsLoaded(obj);
+	}
+	return obj;
+
+}
+
+int yaffs_GetObjectName(yaffs_Object * obj, YCHAR * name, int buffSize)
+{
+	memset(name, 0, buffSize * sizeof(YCHAR));
+
+	yaffs_CheckObjectDetailsLoaded(obj);
+
+	if (obj->objectId == YAFFS_OBJECTID_LOSTNFOUND) {
+		yaffs_strncpy(name, YAFFS_LOSTNFOUND_NAME, buffSize - 1);
+	} else if (obj->chunkId <= 0) {
+		YCHAR locName[20];
+		/* make up a name */
+		yaffs_sprintf(locName, _Y("%s%d"), YAFFS_LOSTNFOUND_PREFIX,
+			      obj->objectId);
+		yaffs_strncpy(name, locName, buffSize - 1);
+
+	}
+#ifdef CONFIG_YAFFS_SHORT_NAMES_IN_RAM
+	else if (obj->shortName[0]) {
+		yaffs_strcpy(name, obj->shortName);
+	}
+#endif
+	else {
+		int result;
+		__u8 *buffer = yaffs_GetTempBuffer(obj->myDev, __LINE__);
+
+		yaffs_ObjectHeader *oh = (yaffs_ObjectHeader *) buffer;
+
+		memset(buffer, 0, obj->myDev->nDataBytesPerChunk);
+
+		if (obj->chunkId >= 0) {
+			result = yaffs_ReadChunkWithTagsFromNAND(obj->myDev,
+							obj->chunkId, buffer,
+							NULL);
+		}
+		yaffs_strncpy(name, oh->name, buffSize - 1);
+
+		yaffs_ReleaseTempBuffer(obj->myDev, buffer, __LINE__);
+	}
+
+	return yaffs_strlen(name);
+}
+
+int yaffs_GetObjectFileLength(yaffs_Object * obj)
+{
+
+	/* Dereference any hard linking */
+	obj = yaffs_GetEquivalentObject(obj);
+
+	if (obj->variantType == YAFFS_OBJECT_TYPE_FILE) {
+		return obj->variant.fileVariant.fileSize;
+	}
+	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK) {
+		return yaffs_strlen(obj->variant.symLinkVariant.alias);
+	} else {
+		/* Only a directory should drop through to here */
+		return obj->myDev->nDataBytesPerChunk;
+	}
+}
+
+int yaffs_GetObjectLinkCount(yaffs_Object * obj)
+{
+	int count = 0;
+	struct list_head *i;
+
+	if (!obj->unlinked) {
+		count++;	/* the object itself */
+	}
+	list_for_each(i, &obj->hardLinks) {
+		count++;	/* add the hard links; */
+	}
+	return count;
+
+}
+
+int yaffs_GetObjectInode(yaffs_Object * obj)
+{
+	obj = yaffs_GetEquivalentObject(obj);
+
+	return obj->objectId;
+}
+
+unsigned yaffs_GetObjectType(yaffs_Object * obj)
+{
+	obj = yaffs_GetEquivalentObject(obj);
+
+	switch (obj->variantType) {
+	case YAFFS_OBJECT_TYPE_FILE:
+		return DT_REG;
+		break;
+	case YAFFS_OBJECT_TYPE_DIRECTORY:
+		return DT_DIR;
+		break;
+	case YAFFS_OBJECT_TYPE_SYMLINK:
+		return DT_LNK;
+		break;
+	case YAFFS_OBJECT_TYPE_HARDLINK:
+		return DT_REG;
+		break;
+	case YAFFS_OBJECT_TYPE_SPECIAL:
+		if (S_ISFIFO(obj->yst_mode))
+			return DT_FIFO;
+		if (S_ISCHR(obj->yst_mode))
+			return DT_CHR;
+		if (S_ISBLK(obj->yst_mode))
+			return DT_BLK;
+		if (S_ISSOCK(obj->yst_mode))
+			return DT_SOCK;
+	default:
+		return DT_REG;
+		break;
+	}
+}
+
+YCHAR *yaffs_GetSymlinkAlias(yaffs_Object * obj)
+{
+	obj = yaffs_GetEquivalentObject(obj);
+	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK) {
+		return yaffs_CloneString(obj->variant.symLinkVariant.alias);
+	} else {
+		return yaffs_CloneString(_Y(""));
+	}
+}
+
+#ifndef CONFIG_YAFFS_WINCE
+
+int yaffs_SetAttributes(yaffs_Object * obj, struct iattr *attr)
+{
+	unsigned int valid = attr->ia_valid;
+
+	if (valid & ATTR_MODE)
+		obj->yst_mode = attr->ia_mode;
+	if (valid & ATTR_UID)
+		obj->yst_uid = attr->ia_uid;
+	if (valid & ATTR_GID)
+		obj->yst_gid = attr->ia_gid;
+
+	if (valid & ATTR_ATIME)
+		obj->yst_atime = Y_TIME_CONVERT(attr->ia_atime);
+	if (valid & ATTR_CTIME)
+		obj->yst_ctime = Y_TIME_CONVERT(attr->ia_ctime);
+	if (valid & ATTR_MTIME)
+		obj->yst_mtime = Y_TIME_CONVERT(attr->ia_mtime);
+
+	if (valid & ATTR_SIZE)
+		yaffs_ResizeFile(obj, attr->ia_size);
+
+	yaffs_UpdateObjectHeader(obj, NULL, 1, 0, 0);
+
+	return YAFFS_OK;
+
+}
+int yaffs_GetAttributes(yaffs_Object * obj, struct iattr *attr)
+{
+	unsigned int valid = 0;
+
+	attr->ia_mode = obj->yst_mode;
+	valid |= ATTR_MODE;
+	attr->ia_uid = obj->yst_uid;
+	valid |= ATTR_UID;
+	attr->ia_gid = obj->yst_gid;
+	valid |= ATTR_GID;
+
+	Y_TIME_CONVERT(attr->ia_atime) = obj->yst_atime;
+	valid |= ATTR_ATIME;
+	Y_TIME_CONVERT(attr->ia_ctime) = obj->yst_ctime;
+	valid |= ATTR_CTIME;
+	Y_TIME_CONVERT(attr->ia_mtime) = obj->yst_mtime;
+	valid |= ATTR_MTIME;
+
+	attr->ia_size = yaffs_GetFileSize(obj);
+	valid |= ATTR_SIZE;
+
+	attr->ia_valid = valid;
+
+	return YAFFS_OK;
+
+}
+
+#endif
+
+#if 0
+int yaffs_DumpObject(yaffs_Object * obj)
+{
+	YCHAR name[257];
+
+	yaffs_GetObjectName(obj, name, 256);
+
+	T(YAFFS_TRACE_ALWAYS,
+	  (TSTR
+	   ("Object %d, inode %d \"%s\"\n dirty %d valid %d serial %d sum %d"
+	    " chunk %d type %d size %d\n"
+	    TENDSTR), obj->objectId, yaffs_GetObjectInode(obj), name,
+	   obj->dirty, obj->valid, obj->serial, obj->sum, obj->chunkId,
+	   yaffs_GetObjectType(obj), yaffs_GetObjectFileLength(obj)));
+
+	return YAFFS_OK;
+}
+#endif
+
+/*---------------------------- Initialisation code -------------------------------------- */
+
+static int yaffs_CheckDevFunctions(const yaffs_Device * dev)
+{
+
+	/* Common functions, gotta have */
+	if (!dev->eraseBlockInNAND || !dev->initialiseNAND)
+		return 0;
+
+#ifdef CONFIG_YAFFS_YAFFS2
+
+	/* Can use the "with tags" style interface for yaffs1 or yaffs2 */
+	if (dev->writeChunkWithTagsToNAND &&
+	    dev->readChunkWithTagsFromNAND &&
+	    !dev->writeChunkToNAND &&
+	    !dev->readChunkFromNAND &&
+	    dev->markNANDBlockBad && dev->queryNANDBlock)
+		return 1;
+#endif
+
+	/* Can use the "spare" style interface for yaffs1 */
+	if (!dev->isYaffs2 &&
+	    !dev->writeChunkWithTagsToNAND &&
+	    !dev->readChunkWithTagsFromNAND &&
+	    dev->writeChunkToNAND &&
+	    dev->readChunkFromNAND &&
+	    !dev->markNANDBlockBad && !dev->queryNANDBlock)
+		return 1;
+
+	return 0;		/* bad */
+}
+
+
+static int yaffs_CreateInitialDirectories(yaffs_Device *dev)
+{
+	/* Initialise the unlinked, deleted, root and lost and found directories */
+
+	dev->lostNFoundDir = dev->rootDir =  NULL;
+	dev->unlinkedDir = dev->deletedDir = NULL;
+
+	dev->unlinkedDir =
+	    yaffs_CreateFakeDirectory(dev, YAFFS_OBJECTID_UNLINKED, S_IFDIR);
+
+	dev->deletedDir =
+	    yaffs_CreateFakeDirectory(dev, YAFFS_OBJECTID_DELETED, S_IFDIR);
+
+	dev->rootDir =
+	    yaffs_CreateFakeDirectory(dev, YAFFS_OBJECTID_ROOT,
+				      YAFFS_ROOT_MODE | S_IFDIR);
+	dev->lostNFoundDir =
+	    yaffs_CreateFakeDirectory(dev, YAFFS_OBJECTID_LOSTNFOUND,
+				      YAFFS_LOSTNFOUND_MODE | S_IFDIR);
+
+	if(dev->lostNFoundDir && dev->rootDir && dev->unlinkedDir && dev->deletedDir){
+		yaffs_AddObjectToDirectory(dev->rootDir, dev->lostNFoundDir);
+		return YAFFS_OK;
+	}
+
+	return YAFFS_FAIL;
+}
+
+int yaffs_GutsInitialise(yaffs_Device * dev)
+{
+	int init_failed = 0;
+	unsigned x;
+	int bits;
+
+	T(YAFFS_TRACE_TRACING, (TSTR("yaffs: yaffs_GutsInitialise()" TENDSTR)));
+
+	/* Check stuff that must be set */
+
+	if (!dev) {
+		T(YAFFS_TRACE_ALWAYS, (TSTR("yaffs: Need a device" TENDSTR)));
+		return YAFFS_FAIL;
+	}
+
+	dev->internalStartBlock = dev->startBlock;
+	dev->internalEndBlock = dev->endBlock;
+	dev->blockOffset = 0;
+	dev->chunkOffset = 0;
+	dev->nFreeChunks = 0;
+
+	if (dev->startBlock == 0) {
+		dev->internalStartBlock = dev->startBlock + 1;
+		dev->internalEndBlock = dev->endBlock + 1;
+		dev->blockOffset = 1;
+		dev->chunkOffset = dev->nChunksPerBlock;
+	}
+
+	/* Check geometry parameters. */
+
+	if ((dev->isYaffs2 && dev->nDataBytesPerChunk < 1024) ||
+	    (!dev->isYaffs2 && dev->nDataBytesPerChunk != 512) ||
+	     dev->nChunksPerBlock < 2 ||
+	     dev->nReservedBlocks < 2 ||
+	     dev->internalStartBlock <= 0 ||
+	     dev->internalEndBlock <= 0 ||
+	     dev->internalEndBlock <= (dev->internalStartBlock + dev->nReservedBlocks + 2)	// otherwise it is too small
+	    ) {
+		T(YAFFS_TRACE_ALWAYS,
+		  (TSTR
+		   ("yaffs: NAND geometry problems: chunk size %d, type is yaffs%s "
+		    TENDSTR), dev->nDataBytesPerChunk, dev->isYaffs2 ? "2" : ""));
+		return YAFFS_FAIL;
+	}
+
+	if (yaffs_InitialiseNAND(dev) != YAFFS_OK) {
+		T(YAFFS_TRACE_ALWAYS,
+		  (TSTR("yaffs: InitialiseNAND failed" TENDSTR)));
+		return YAFFS_FAIL;
+	}
+
+	/* Got the right mix of functions? */
+	if (!yaffs_CheckDevFunctions(dev)) {
+		/* Function missing */
+		T(YAFFS_TRACE_ALWAYS,
+		  (TSTR
+		   ("yaffs: device function(s) missing or wrong\n" TENDSTR)));
+
+		return YAFFS_FAIL;
+	}
+
+	/* This is really a compilation check. */
+	if (!yaffs_CheckStructures()) {
+		T(YAFFS_TRACE_ALWAYS,
+		  (TSTR("yaffs_CheckStructures failed\n" TENDSTR)));
+		return YAFFS_FAIL;
+	}
+
+	if (dev->isMounted) {
+		T(YAFFS_TRACE_ALWAYS,
+		  (TSTR("yaffs: device already mounted\n" TENDSTR)));
+		return YAFFS_FAIL;
+	}
+
+	/* Finished with most checks. One or two more checks happen later on too. */
+
+	dev->isMounted = 1;
+
+
+
+	/* OK now calculate a few things for the device */
+
+	/*
+	 *  Calculate all the chunk size manipulation numbers:
+	 */
+	 /* Start off assuming it is a power of 2 */
+	 dev->chunkShift = ShiftDiv(dev->nDataBytesPerChunk);
+	 dev->chunkMask = (1<<dev->chunkShift) - 1;
+
+	 if(dev->nDataBytesPerChunk == (dev->chunkMask + 1)){
+	 	/* Yes it is a power of 2, disable crumbs */
+		dev->crumbMask = 0;
+		dev->crumbShift = 0;
+		dev->crumbsPerChunk = 0;
+	 } else {
+	 	/* Not a power of 2, use crumbs instead */
+		dev->crumbShift = ShiftDiv(sizeof(yaffs_PackedTags2TagsPart));
+		dev->crumbMask = (1<<dev->crumbShift)-1;
+		dev->crumbsPerChunk = dev->nDataBytesPerChunk/(1 << dev->crumbShift);
+		dev->chunkShift = 0;
+		dev->chunkMask = 0;
+	}
+
+
+	/*
+	 * Calculate chunkGroupBits.
+	 * We need to find the next power of 2 > than internalEndBlock
+	 */
+
+	x = dev->nChunksPerBlock * (dev->internalEndBlock + 1);
+
+	bits = ShiftsGE(x);
+
+	/* Set up tnode width if wide tnodes are enabled. */
+	if(!dev->wideTnodesDisabled){
+		/* bits must be even so that we end up with 32-bit words */
+		if(bits & 1)
+			bits++;
+		if(bits < 16)
+			dev->tnodeWidth = 16;
+		else
+			dev->tnodeWidth = bits;
+	}
+	else
+		dev->tnodeWidth = 16;
+
+	dev->tnodeMask = (1<<dev->tnodeWidth)-1;
+
+	/* Level0 Tnodes are 16 bits or wider (if wide tnodes are enabled),
+	 * so if the bitwidth of the
+	 * chunk range we're using is greater than 16 we need
+	 * to figure out chunk shift and chunkGroupSize
+	 */
+
+	if (bits <= dev->tnodeWidth)
+		dev->chunkGroupBits = 0;
+	else
+		dev->chunkGroupBits = bits - dev->tnodeWidth;
+
+
+	dev->chunkGroupSize = 1 << dev->chunkGroupBits;
+
+	if (dev->nChunksPerBlock < dev->chunkGroupSize) {
+		/* We have a problem because the soft delete won't work if
+		 * the chunk group size > chunks per block.
+		 * This can be remedied by using larger "virtual blocks".
+		 */
+		T(YAFFS_TRACE_ALWAYS,
+		  (TSTR("yaffs: chunk group too large\n" TENDSTR)));
+
+		return YAFFS_FAIL;
+	}
+
+	/* OK, we've finished verifying the device, lets continue with initialisation */
+
+	/* More device initialisation */
+	dev->garbageCollections = 0;
+	dev->passiveGarbageCollections = 0;
+	dev->currentDirtyChecker = 0;
+	dev->bufferedBlock = -1;
+	dev->doingBufferedBlockRewrite = 0;
+	dev->nDeletedFiles = 0;
+	dev->nBackgroundDeletions = 0;
+	dev->nUnlinkedFiles = 0;
+	dev->eccFixed = 0;
+	dev->eccUnfixed = 0;
+	dev->tagsEccFixed = 0;
+	dev->tagsEccUnfixed = 0;
+	dev->nErasureFailures = 0;
+	dev->nErasedBlocks = 0;
+	dev->isDoingGC = 0;
+	dev->hasPendingPrioritisedGCs = 1; /* Assume the worst for now, will get fixed on first GC */
+
+	/* Initialise temporary buffers and caches. */
+	if(!yaffs_InitialiseTempBuffers(dev))
+		init_failed = 1;
+
+	dev->srCache = NULL;
+	dev->gcCleanupList = NULL;
+
+
+	if (!init_failed &&
+	    dev->nShortOpCaches > 0) {
+		int i;
+		__u8 *buf;
+		int srCacheBytes = dev->nShortOpCaches * sizeof(yaffs_ChunkCache);
+
+		if (dev->nShortOpCaches > YAFFS_MAX_SHORT_OP_CACHES) {
+			dev->nShortOpCaches = YAFFS_MAX_SHORT_OP_CACHES;
+		}
+
+		buf = dev->srCache =  YMALLOC(srCacheBytes);
+
+		if(dev->srCache)
+			memset(dev->srCache,0,srCacheBytes);
+
+		for (i = 0; i < dev->nShortOpCaches && buf; i++) {
+			dev->srCache[i].object = NULL;
+			dev->srCache[i].lastUse = 0;
+			dev->srCache[i].dirty = 0;
+			dev->srCache[i].data = buf = YMALLOC_DMA(dev->nDataBytesPerChunk);
+		}
+		if(!buf)
+			init_failed = 1;
+
+		dev->srLastUse = 0;
+	}
+
+	dev->cacheHits = 0;
+
+	if(!init_failed){
+		dev->gcCleanupList = YMALLOC(dev->nChunksPerBlock * sizeof(__u32));
+		if(!dev->gcCleanupList)
+			init_failed = 1;
+	}
+
+	if (dev->isYaffs2) {
+		dev->useHeaderFileSize = 1;
+	}
+	if(!init_failed && !yaffs_InitialiseBlocks(dev))
+		init_failed = 1;
+
+	yaffs_InitialiseTnodes(dev);
+	yaffs_InitialiseObjects(dev);
+
+	if(!init_failed && !yaffs_CreateInitialDirectories(dev))
+		init_failed = 1;
+
+
+	if(!init_failed){
+		/* Now scan the flash. */
+		if (dev->isYaffs2) {
+			if(yaffs_CheckpointRestore(dev)) {
+				T(YAFFS_TRACE_ALWAYS,
+				  (TSTR("yaffs: restored from checkpoint" TENDSTR)));
+			} else {
+
+				/* Clean up the mess caused by an aborted checkpoint load
+				 * and scan backwards.
+				 */
+				yaffs_DeinitialiseBlocks(dev);
+				yaffs_DeinitialiseTnodes(dev);
+				yaffs_DeinitialiseObjects(dev);
+
+
+				dev->nErasedBlocks = 0;
+				dev->nFreeChunks = 0;
+				dev->allocationBlock = -1;
+				dev->allocationPage = -1;
+				dev->nDeletedFiles = 0;
+				dev->nUnlinkedFiles = 0;
+				dev->nBackgroundDeletions = 0;
+				dev->oldestDirtySequence = 0;
+
+				if(!init_failed && !yaffs_InitialiseBlocks(dev))
+					init_failed = 1;
+
+				yaffs_InitialiseTnodes(dev);
+				yaffs_InitialiseObjects(dev);
+
+				if(!init_failed && !yaffs_CreateInitialDirectories(dev))
+					init_failed = 1;
+
+				if(!init_failed && !yaffs_ScanBackwards(dev))
+					init_failed = 1;
+			}
+		}else
+			if(!yaffs_Scan(dev))
+				init_failed = 1;
+	}
+
+	if(init_failed){
+		/* Clean up the mess */
+		T(YAFFS_TRACE_TRACING,
+		  (TSTR("yaffs: yaffs_GutsInitialise() aborted.\n" TENDSTR)));
+
+		yaffs_Deinitialise(dev);
+		return YAFFS_FAIL;
+	}
+
+	/* Zero out stats */
+	dev->nPageReads = 0;
+	dev->nPageWrites = 0;
+	dev->nBlockErasures = 0;
+	dev->nGCCopies = 0;
+	dev->nRetriedWrites = 0;
+
+	dev->nRetiredBlocks = 0;
+
+	yaffs_VerifyFreeChunks(dev);
+	yaffs_VerifyBlocks(dev);
+
+
+	T(YAFFS_TRACE_TRACING,
+	  (TSTR("yaffs: yaffs_GutsInitialise() done.\n" TENDSTR)));
+	return YAFFS_OK;
+
+}
+
+void yaffs_Deinitialise(yaffs_Device * dev)
+{
+	if (dev->isMounted) {
+		int i;
+
+		yaffs_DeinitialiseBlocks(dev);
+		yaffs_DeinitialiseTnodes(dev);
+		yaffs_DeinitialiseObjects(dev);
+		if (dev->nShortOpCaches > 0 &&
+		    dev->srCache) {
+
+			for (i = 0; i < dev->nShortOpCaches; i++) {
+				if(dev->srCache[i].data)
+					YFREE(dev->srCache[i].data);
+				dev->srCache[i].data = NULL;
+			}
+
+			YFREE(dev->srCache);
+			dev->srCache = NULL;
+		}
+
+		YFREE(dev->gcCleanupList);
+
+		for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
+			YFREE(dev->tempBuffer[i].buffer);
+		}
+
+		dev->isMounted = 0;
+	}
+
+}
+
+static int yaffs_CountFreeChunks(yaffs_Device * dev)
+{
+	int nFree;
+	int b;
+
+	yaffs_BlockInfo *blk;
+
+	for (nFree = 0, b = dev->internalStartBlock; b <= dev->internalEndBlock;
+	     b++) {
+		blk = yaffs_GetBlockInfo(dev, b);
+
+		switch (blk->blockState) {
+		case YAFFS_BLOCK_STATE_EMPTY:
+		case YAFFS_BLOCK_STATE_ALLOCATING:
+		case YAFFS_BLOCK_STATE_COLLECTING:
+		case YAFFS_BLOCK_STATE_FULL:
+			nFree +=
+			    (dev->nChunksPerBlock - blk->pagesInUse +
+			     blk->softDeletions);
+			break;
+		default:
+			break;
+		}
+
+	}
+
+	return nFree;
+}
+
+int yaffs_GetNumberOfFreeChunks(yaffs_Device * dev)
+{
+	/* This is what we report to the outside world */
+
+	int nFree;
+	int nDirtyCacheChunks;
+	int blocksForCheckpoint;
+
+#if 1
+	nFree = dev->nFreeChunks;
+#else
+	nFree = yaffs_CountFreeChunks(dev);
+#endif
+
+	nFree += dev->nDeletedFiles;
+
+	/* Now count the number of dirty chunks in the cache and subtract those */
+
+	{
+		int i;
+		for (nDirtyCacheChunks = 0, i = 0; i < dev->nShortOpCaches; i++) {
+			if (dev->srCache[i].dirty)
+				nDirtyCacheChunks++;
+		}
+	}
+
+	nFree -= nDirtyCacheChunks;
+
+	nFree -= ((dev->nReservedBlocks + 1) * dev->nChunksPerBlock);
+
+	/* Now we figure out how much to reserve for the checkpoint and report that... */
+	blocksForCheckpoint = dev->nCheckpointReservedBlocks - dev->blocksInCheckpoint;
+	if(blocksForCheckpoint < 0)
+		blocksForCheckpoint = 0;
+
+	nFree -= (blocksForCheckpoint * dev->nChunksPerBlock);
+
+	if (nFree < 0)
+		nFree = 0;
+
+	return nFree;
+
+}
+
+static int yaffs_freeVerificationFailures;
+
+static void yaffs_VerifyFreeChunks(yaffs_Device * dev)
+{
+	int counted;
+	int difference;
+
+	if(yaffs_SkipVerification(dev))
+		return;
+
+	counted = yaffs_CountFreeChunks(dev);
+
+	difference = dev->nFreeChunks - counted;
+
+	if (difference) {
+		T(YAFFS_TRACE_ALWAYS,
+		  (TSTR("Freechunks verification failure %d %d %d" TENDSTR),
+		   dev->nFreeChunks, counted, difference));
+		yaffs_freeVerificationFailures++;
+	}
+}
+
+/*---------------------------------------- YAFFS test code ----------------------*/
+
+#define yaffs_CheckStruct(structure,syze, name) \
+           if(sizeof(structure) != syze) \
+	       { \
+	         T(YAFFS_TRACE_ALWAYS,(TSTR("%s should be %d but is %d\n" TENDSTR),\
+		 name,syze,sizeof(structure))); \
+	         return YAFFS_FAIL; \
+		}
+
+static int yaffs_CheckStructures(void)
+{
+/*      yaffs_CheckStruct(yaffs_Tags,8,"yaffs_Tags") */
+/*      yaffs_CheckStruct(yaffs_TagsUnion,8,"yaffs_TagsUnion") */
+/*      yaffs_CheckStruct(yaffs_Spare,16,"yaffs_Spare") */
+#ifndef CONFIG_YAFFS_TNODE_LIST_DEBUG
+	yaffs_CheckStruct(yaffs_Tnode, 2 * YAFFS_NTNODES_LEVEL0, "yaffs_Tnode")
+#endif
+	    yaffs_CheckStruct(yaffs_ObjectHeader, 512, "yaffs_ObjectHeader")
+
+	    return YAFFS_OK;
+}
diff --git a/target/linux/generic/files/fs/yaffs2/yaffs_guts.h b/target/linux/generic/files/fs/yaffs2/yaffs_guts.h
new file mode 100644
index 0000000000..ea06c1a38e
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/yaffs_guts.h
@@ -0,0 +1,902 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ *   for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+#ifndef __YAFFS_GUTS_H__
+#define __YAFFS_GUTS_H__
+
+#include "devextras.h"
+#include "yportenv.h"
+
+#define YAFFS_OK	1
+#define YAFFS_FAIL  0
+
+/* Give us a  Y=0x59,
+ * Give us an A=0x41,
+ * Give us an FF=0xFF
+ * Give us an S=0x53
+ * And what have we got...
+ */
+#define YAFFS_MAGIC			0x5941FF53
+
+#define YAFFS_NTNODES_LEVEL0	  	16
+#define YAFFS_TNODES_LEVEL0_BITS	4
+#define YAFFS_TNODES_LEVEL0_MASK	0xf
+
+#define YAFFS_NTNODES_INTERNAL 		(YAFFS_NTNODES_LEVEL0 / 2)
+#define YAFFS_TNODES_INTERNAL_BITS 	(YAFFS_TNODES_LEVEL0_BITS - 1)
+#define YAFFS_TNODES_INTERNAL_MASK	0x7
+#define YAFFS_TNODES_MAX_LEVEL		6
+
+#ifndef CONFIG_YAFFS_NO_YAFFS1
+#define YAFFS_BYTES_PER_SPARE		16
+#define YAFFS_BYTES_PER_CHUNK		512
+#define YAFFS_CHUNK_SIZE_SHIFT		9
+#define YAFFS_CHUNKS_PER_BLOCK		32
+#define YAFFS_BYTES_PER_BLOCK		(YAFFS_CHUNKS_PER_BLOCK*YAFFS_BYTES_PER_CHUNK)
+#endif
+
+#define YAFFS_MIN_YAFFS2_CHUNK_SIZE 	1024
+#define YAFFS_MIN_YAFFS2_SPARE_SIZE	32
+
+#define YAFFS_MAX_CHUNK_ID		0x000FFFFF
+
+#define YAFFS_UNUSED_OBJECT_ID		0x0003FFFF
+
+#define YAFFS_ALLOCATION_NOBJECTS	100
+#define YAFFS_ALLOCATION_NTNODES	100
+#define YAFFS_ALLOCATION_NLINKS		100
+
+#define YAFFS_NOBJECT_BUCKETS		256
+
+
+#define YAFFS_OBJECT_SPACE		0x40000
+
+#define YAFFS_CHECKPOINT_VERSION 	3
+
+#ifdef CONFIG_YAFFS_UNICODE
+#define YAFFS_MAX_NAME_LENGTH		127
+#define YAFFS_MAX_ALIAS_LENGTH		79
+#else
+#define YAFFS_MAX_NAME_LENGTH		255
+#define YAFFS_MAX_ALIAS_LENGTH		159
+#endif
+
+#define YAFFS_SHORT_NAME_LENGTH		15
+
+/* Some special object ids for pseudo objects */
+#define YAFFS_OBJECTID_ROOT		1
+#define YAFFS_OBJECTID_LOSTNFOUND	2
+#define YAFFS_OBJECTID_UNLINKED		3
+#define YAFFS_OBJECTID_DELETED		4
+
+/* Sseudo object ids for checkpointing */
+#define YAFFS_OBJECTID_SB_HEADER	0x10
+#define YAFFS_OBJECTID_CHECKPOINT_DATA	0x20
+#define YAFFS_SEQUENCE_CHECKPOINT_DATA  0x21
+
+/* */
+
+#define YAFFS_MAX_SHORT_OP_CACHES	20
+
+#define YAFFS_N_TEMP_BUFFERS		4
+
+/* We limit the number attempts at sucessfully saving a chunk of data.
+ * Small-page devices have 32 pages per block; large-page devices have 64.
+ * Default to something in the order of 5 to 10 blocks worth of chunks.
+ */
+#define YAFFS_WR_ATTEMPTS		(5*64)
+
+/* Sequence numbers are used in YAFFS2 to determine block allocation order.
+ * The range is limited slightly to help distinguish bad numbers from good.
+ * This also allows us to perhaps in the future use special numbers for
+ * special purposes.
+ * EFFFFF00 allows the allocation of 8 blocks per second (~1Mbytes) for 15 years,
+ * and is a larger number than the lifetime of a 2GB device.
+ */
+#define YAFFS_LOWEST_SEQUENCE_NUMBER	0x00001000
+#define YAFFS_HIGHEST_SEQUENCE_NUMBER	0xEFFFFF00
+
+/* ChunkCache is used for short read/write operations.*/
+typedef struct {
+	struct yaffs_ObjectStruct *object;
+	int chunkId;
+	int lastUse;
+	int dirty;
+	int nBytes;		/* Only valid if the cache is dirty */
+	int locked;		/* Can't push out or flush while locked. */
+#ifdef CONFIG_YAFFS_YAFFS2
+	__u8 *data;
+#else
+	__u8 data[YAFFS_BYTES_PER_CHUNK];
+#endif
+} yaffs_ChunkCache;
+
+
+
+/* Tags structures in RAM
+ * NB This uses bitfield. Bitfields should not straddle a u32 boundary otherwise
+ * the structure size will get blown out.
+ */
+
+#ifndef CONFIG_YAFFS_NO_YAFFS1
+typedef struct {
+	unsigned chunkId:20;
+	unsigned serialNumber:2;
+	unsigned byteCount:10;
+	unsigned objectId:18;
+	unsigned ecc:12;
+	unsigned unusedStuff:2;
+
+} yaffs_Tags;
+
+typedef union {
+	yaffs_Tags asTags;
+	__u8 asBytes[8];
+} yaffs_TagsUnion;
+
+#endif
+
+/* Stuff used for extended tags in YAFFS2 */
+
+typedef enum {
+	YAFFS_ECC_RESULT_UNKNOWN,
+	YAFFS_ECC_RESULT_NO_ERROR,
+	YAFFS_ECC_RESULT_FIXED,
+	YAFFS_ECC_RESULT_UNFIXED
+} yaffs_ECCResult;
+
+typedef enum {
+	YAFFS_OBJECT_TYPE_UNKNOWN,
+	YAFFS_OBJECT_TYPE_FILE,
+	YAFFS_OBJECT_TYPE_SYMLINK,
+	YAFFS_OBJECT_TYPE_DIRECTORY,
+	YAFFS_OBJECT_TYPE_HARDLINK,
+	YAFFS_OBJECT_TYPE_SPECIAL
+} yaffs_ObjectType;
+
+#define YAFFS_OBJECT_TYPE_MAX YAFFS_OBJECT_TYPE_SPECIAL
+
+typedef struct {
+
+	unsigned validMarker0;
+	unsigned chunkUsed;	/*  Status of the chunk: used or unused */
+	unsigned objectId;	/* If 0 then this is not part of an object (unused) */
+	unsigned chunkId;	/* If 0 then this is a header, else a data chunk */
+	unsigned byteCount;	/* Only valid for data chunks */
+
+	/* The following stuff only has meaning when we read */
+	yaffs_ECCResult eccResult;
+	unsigned blockBad;
+
+	/* YAFFS 1 stuff */
+	unsigned chunkDeleted;	/* The chunk is marked deleted */
+	unsigned serialNumber;	/* Yaffs1 2-bit serial number */
+
+	/* YAFFS2 stuff */
+	unsigned sequenceNumber;	/* The sequence number of this block */
+
+	/* Extra info if this is an object header (YAFFS2 only) */
+
+	unsigned extraHeaderInfoAvailable;	/* There is extra info available if this is not zero */
+	unsigned extraParentObjectId;	/* The parent object */
+	unsigned extraIsShrinkHeader;	/* Is it a shrink header? */
+	unsigned extraShadows;		/* Does this shadow another object? */
+
+	yaffs_ObjectType extraObjectType;	/* What object type? */
+
+	unsigned extraFileLength;		/* Length if it is a file */
+	unsigned extraEquivalentObjectId;	/* Equivalent object Id if it is a hard link */
+
+	unsigned validMarker1;
+
+} yaffs_ExtendedTags;
+
+/* Spare structure for YAFFS1 */
+typedef struct {
+	__u8 tagByte0;
+	__u8 tagByte1;
+	__u8 tagByte2;
+	__u8 tagByte3;
+	__u8 pageStatus;	/* set to 0 to delete the chunk */
+	__u8 blockStatus;
+	__u8 tagByte4;
+	__u8 tagByte5;
+	__u8 ecc1[3];
+	__u8 tagByte6;
+	__u8 tagByte7;
+	__u8 ecc2[3];
+} yaffs_Spare;
+
+/*Special structure for passing through to mtd */
+struct yaffs_NANDSpare {
+	yaffs_Spare spare;
+	int eccres1;
+	int eccres2;
+};
+
+/* Block data in RAM */
+
+typedef enum {
+	YAFFS_BLOCK_STATE_UNKNOWN = 0,
+
+	YAFFS_BLOCK_STATE_SCANNING,
+	YAFFS_BLOCK_STATE_NEEDS_SCANNING,
+	/* The block might have something on it (ie it is allocating or full, perhaps empty)
+	 * but it needs to be scanned to determine its true state.
+	 * This state is only valid during yaffs_Scan.
+	 * NB We tolerate empty because the pre-scanner might be incapable of deciding
+	 * However, if this state is returned on a YAFFS2 device, then we expect a sequence number
+	 */
+
+	YAFFS_BLOCK_STATE_EMPTY,
+	/* This block is empty */
+
+	YAFFS_BLOCK_STATE_ALLOCATING,
+	/* This block is partially allocated.
+	 * At least one page holds valid data.
+	 * This is the one currently being used for page
+	 * allocation. Should never be more than one of these
+	 */
+
+	YAFFS_BLOCK_STATE_FULL,
+	/* All the pages in this block have been allocated.
+	 */
+
+	YAFFS_BLOCK_STATE_DIRTY,
+	/* All pages have been allocated and deleted.
+	 * Erase me, reuse me.
+	 */
+
+	YAFFS_BLOCK_STATE_CHECKPOINT,
+	/* This block is assigned to holding checkpoint data.
+	 */
+
+	YAFFS_BLOCK_STATE_COLLECTING,
+	/* This block is being garbage collected */
+
+	YAFFS_BLOCK_STATE_DEAD
+	/* This block has failed and is not in use */
+} yaffs_BlockState;
+
+#define	YAFFS_NUMBER_OF_BLOCK_STATES (YAFFS_BLOCK_STATE_DEAD + 1)
+
+
+typedef struct {
+
+	int softDeletions:10;	/* number of soft deleted pages */
+	int pagesInUse:10;	/* number of pages in use */
+	yaffs_BlockState blockState:4;	/* One of the above block states */
+	__u32 needsRetiring:1;	/* Data has failed on this block, need to get valid data off */
+                        	/* and retire the block. */
+	__u32 skipErasedCheck: 1; /* If this is set we can skip the erased check on this block */
+	__u32 gcPrioritise: 1; 	/* An ECC check or blank check has failed on this block.
+				   It should be prioritised for GC */
+        __u32 chunkErrorStrikes:3; /* How many times we've had ecc etc failures on this block and tried to reuse it */
+
+#ifdef CONFIG_YAFFS_YAFFS2
+	__u32 hasShrinkHeader:1; /* This block has at least one shrink object header */
+	__u32 sequenceNumber;	 /* block sequence number for yaffs2 */
+#endif
+
+} yaffs_BlockInfo;
+
+/* -------------------------- Object structure -------------------------------*/
+/* This is the object structure as stored on NAND */
+
+typedef struct {
+	yaffs_ObjectType type;
+
+	/* Apply to everything  */
+	int parentObjectId;
+	__u16 sum__NoLongerUsed;	/* checksum of name. No longer used */
+	YCHAR name[YAFFS_MAX_NAME_LENGTH + 1];
+
+	/* Thes following apply to directories, files, symlinks - not hard links */
+	__u32 yst_mode;		/* protection */
+
+#ifdef CONFIG_YAFFS_WINCE
+	__u32 notForWinCE[5];
+#else
+	__u32 yst_uid;
+	__u32 yst_gid;
+	__u32 yst_atime;
+	__u32 yst_mtime;
+	__u32 yst_ctime;
+#endif
+
+	/* File size  applies to files only */
+	int fileSize;
+
+	/* Equivalent object id applies to hard links only. */
+	int equivalentObjectId;
+
+	/* Alias is for symlinks only. */
+	YCHAR alias[YAFFS_MAX_ALIAS_LENGTH + 1];
+
+	__u32 yst_rdev;		/* device stuff for block and char devices (major/min) */
+
+#ifdef CONFIG_YAFFS_WINCE
+	__u32 win_ctime[2];
+	__u32 win_atime[2];
+	__u32 win_mtime[2];
+	__u32 roomToGrow[4];
+#else
+	__u32 roomToGrow[10];
+#endif
+
+	int shadowsObject;	/* This object header shadows the specified object if > 0 */
+
+	/* isShrink applies to object headers written when we shrink the file (ie resize) */
+	__u32 isShrink;
+
+} yaffs_ObjectHeader;
+
+/*--------------------------- Tnode -------------------------- */
+
+union yaffs_Tnode_union {
+#ifdef CONFIG_YAFFS_TNODE_LIST_DEBUG
+	union yaffs_Tnode_union *internal[YAFFS_NTNODES_INTERNAL + 1];
+#else
+	union yaffs_Tnode_union *internal[YAFFS_NTNODES_INTERNAL];
+#endif
+/*	__u16 level0[YAFFS_NTNODES_LEVEL0]; */
+
+};
+
+typedef union yaffs_Tnode_union yaffs_Tnode;
+
+struct yaffs_TnodeList_struct {
+	struct yaffs_TnodeList_struct *next;
+	yaffs_Tnode *tnodes;
+};
+
+typedef struct yaffs_TnodeList_struct yaffs_TnodeList;
+
+/*------------------------  Object -----------------------------*/
+/* An object can be one of:
+ * - a directory (no data, has children links
+ * - a regular file (data.... not prunes :->).
+ * - a symlink [symbolic link] (the alias).
+ * - a hard link
+ */
+
+typedef struct {
+	__u32 fileSize;
+	__u32 scannedFileSize;
+	__u32 shrinkSize;
+	int topLevel;
+	yaffs_Tnode *top;
+} yaffs_FileStructure;
+
+typedef struct {
+	struct list_head children;	/* list of child links */
+} yaffs_DirectoryStructure;
+
+typedef struct {
+	YCHAR *alias;
+} yaffs_SymLinkStructure;
+
+typedef struct {
+	struct yaffs_ObjectStruct *equivalentObject;
+	__u32 equivalentObjectId;
+} yaffs_HardLinkStructure;
+
+typedef union {
+	yaffs_FileStructure fileVariant;
+	yaffs_DirectoryStructure directoryVariant;
+	yaffs_SymLinkStructure symLinkVariant;
+	yaffs_HardLinkStructure hardLinkVariant;
+} yaffs_ObjectVariant;
+
+struct yaffs_ObjectStruct {
+	__u8 deleted:1;		/* This should only apply to unlinked files. */
+	__u8 softDeleted:1;	/* it has also been soft deleted */
+	__u8 unlinked:1;	/* An unlinked file. The file should be in the unlinked directory.*/
+	__u8 fake:1;		/* A fake object has no presence on NAND. */
+	__u8 renameAllowed:1;	/* Some objects are not allowed to be renamed. */
+	__u8 unlinkAllowed:1;
+	__u8 dirty:1;		/* the object needs to be written to flash */
+	__u8 valid:1;		/* When the file system is being loaded up, this
+				 * object might be created before the data
+				 * is available (ie. file data records appear before the header).
+				 */
+	__u8 lazyLoaded:1;	/* This object has been lazy loaded and is missing some detail */
+
+	__u8 deferedFree:1;	/* For Linux kernel. Object is removed from NAND, but is
+				 * still in the inode cache. Free of object is defered.
+				 * until the inode is released.
+				 */
+
+	__u8 serial;		/* serial number of chunk in NAND. Cached here */
+	__u16 sum;		/* sum of the name to speed searching */
+
+	struct yaffs_DeviceStruct *myDev;	/* The device I'm on */
+
+	struct list_head hashLink;	/* list of objects in this hash bucket */
+
+	struct list_head hardLinks;	/* all the equivalent hard linked objects */
+
+	/* directory structure stuff */
+	/* also used for linking up the free list */
+	struct yaffs_ObjectStruct *parent;
+	struct list_head siblings;
+
+	/* Where's my object header in NAND? */
+	int chunkId;
+
+	int nDataChunks;	/* Number of data chunks attached to the file. */
+
+	__u32 objectId;		/* the object id value */
+
+	__u32 yst_mode;
+
+#ifdef CONFIG_YAFFS_SHORT_NAMES_IN_RAM
+	YCHAR shortName[YAFFS_SHORT_NAME_LENGTH + 1];
+#endif
+
+#ifndef __KERNEL__
+	__u32 inUse;
+#endif
+
+#ifdef CONFIG_YAFFS_WINCE
+	__u32 win_ctime[2];
+	__u32 win_mtime[2];
+	__u32 win_atime[2];
+#else
+	__u32 yst_uid;
+	__u32 yst_gid;
+	__u32 yst_atime;
+	__u32 yst_mtime;
+	__u32 yst_ctime;
+#endif
+
+	__u32 yst_rdev;
+
+#ifdef __KERNEL__
+	struct inode *myInode;
+
+#endif
+
+	yaffs_ObjectType variantType;
+
+	yaffs_ObjectVariant variant;
+
+};
+
+typedef struct yaffs_ObjectStruct yaffs_Object;
+
+struct yaffs_ObjectList_struct {
+	yaffs_Object *objects;
+	struct yaffs_ObjectList_struct *next;
+};
+
+typedef struct yaffs_ObjectList_struct yaffs_ObjectList;
+
+typedef struct {
+	struct list_head list;
+	int count;
+} yaffs_ObjectBucket;
+
+
+/* yaffs_CheckpointObject holds the definition of an object as dumped
+ * by checkpointing.
+ */
+
+typedef struct {
+        int structType;
+	__u32 objectId;
+	__u32 parentId;
+	int chunkId;
+
+	yaffs_ObjectType variantType:3;
+	__u8 deleted:1;
+	__u8 softDeleted:1;
+	__u8 unlinked:1;
+	__u8 fake:1;
+	__u8 renameAllowed:1;
+	__u8 unlinkAllowed:1;
+	__u8 serial;
+
+	int nDataChunks;
+	__u32 fileSizeOrEquivalentObjectId;
+
+}yaffs_CheckpointObject;
+
+/*--------------------- Temporary buffers ----------------
+ *
+ * These are chunk-sized working buffers. Each device has a few
+ */
+
+typedef struct {
+	__u8 *buffer;
+	int line;	/* track from whence this buffer was allocated */
+	int maxLine;
+} yaffs_TempBuffer;
+
+/*----------------- Device ---------------------------------*/
+
+struct yaffs_DeviceStruct {
+	struct list_head devList;
+	const char *name;
+
+	/* Entry parameters set up way early. Yaffs sets up the rest.*/
+	int nDataBytesPerChunk;	/* Should be a power of 2 >= 512 */
+	int nChunksPerBlock;	/* does not need to be a power of 2 */
+	int nBytesPerSpare;	/* spare area size */
+	int startBlock;		/* Start block we're allowed to use */
+	int endBlock;		/* End block we're allowed to use */
+	int nReservedBlocks;	/* We want this tuneable so that we can reduce */
+				/* reserved blocks on NOR and RAM. */
+
+
+	/* Stuff used by the shared space checkpointing mechanism */
+	/* If this value is zero, then this mechanism is disabled */
+
+	int nCheckpointReservedBlocks; /* Blocks to reserve for checkpoint data */
+
+
+
+
+	int nShortOpCaches;	/* If <= 0, then short op caching is disabled, else
+				 * the number of short op caches (don't use too many)
+				 */
+
+	int useHeaderFileSize;	/* Flag to determine if we should use file sizes from the header */
+
+	int useNANDECC;		/* Flag to decide whether or not to use NANDECC */
+
+	void *genericDevice;	/* Pointer to device context
+				 * On an mtd this holds the mtd pointer.
+				 */
+        void *superBlock;
+
+	/* NAND access functions (Must be set before calling YAFFS)*/
+
+	int (*writeChunkToNAND) (struct yaffs_DeviceStruct * dev,
+				 int chunkInNAND, const __u8 * data,
+				 const yaffs_Spare * spare);
+	int (*readChunkFromNAND) (struct yaffs_DeviceStruct * dev,
+				  int chunkInNAND, __u8 * data,
+				  yaffs_Spare * spare);
+	int (*eraseBlockInNAND) (struct yaffs_DeviceStruct * dev,
+				 int blockInNAND);
+	int (*initialiseNAND) (struct yaffs_DeviceStruct * dev);
+
+#ifdef CONFIG_YAFFS_YAFFS2
+	int (*writeChunkWithTagsToNAND) (struct yaffs_DeviceStruct * dev,
+					 int chunkInNAND, const __u8 * data,
+					 const yaffs_ExtendedTags * tags);
+	int (*readChunkWithTagsFromNAND) (struct yaffs_DeviceStruct * dev,
+					  int chunkInNAND, __u8 * data,
+					  yaffs_ExtendedTags * tags);
+	int (*markNANDBlockBad) (struct yaffs_DeviceStruct * dev, int blockNo);
+	int (*queryNANDBlock) (struct yaffs_DeviceStruct * dev, int blockNo,
+			       yaffs_BlockState * state, int *sequenceNumber);
+#endif
+
+	int isYaffs2;
+
+	/* The removeObjectCallback function must be supplied by OS flavours that
+	 * need it. The Linux kernel does not use this, but yaffs direct does use
+	 * it to implement the faster readdir
+	 */
+	void (*removeObjectCallback)(struct yaffs_ObjectStruct *obj);
+
+	/* Callback to mark the superblock dirsty */
+	void (*markSuperBlockDirty)(void * superblock);
+
+	int wideTnodesDisabled; /* Set to disable wide tnodes */
+
+
+	/* End of stuff that must be set before initialisation. */
+
+	/* Checkpoint control. Can be set before or after initialisation */
+	__u8 skipCheckpointRead;
+	__u8 skipCheckpointWrite;
+
+	/* Runtime parameters. Set up by YAFFS. */
+
+	__u16 chunkGroupBits;	/* 0 for devices <= 32MB. else log2(nchunks) - 16 */
+	__u16 chunkGroupSize;	/* == 2^^chunkGroupBits */
+
+	/* Stuff to support wide tnodes */
+	__u32 tnodeWidth;
+	__u32 tnodeMask;
+
+	/* Stuff to support various file offses to chunk/offset translations */
+	/* "Crumbs" for nDataBytesPerChunk not being a power of 2 */
+	__u32 crumbMask;
+	__u32 crumbShift;
+	__u32 crumbsPerChunk;
+
+	/* Straight shifting for nDataBytesPerChunk being a power of 2 */
+	__u32 chunkShift;
+	__u32 chunkMask;
+
+
+#ifdef __KERNEL__
+
+	struct semaphore sem;	/* Semaphore for waiting on erasure.*/
+	struct semaphore grossLock;	/* Gross locking semaphore */
+	__u8 *spareBuffer;	/* For mtdif2 use. Don't know the size of the buffer
+				 * at compile time so we have to allocate it.
+				 */
+	void (*putSuperFunc) (struct super_block * sb);
+#endif
+
+	int isMounted;
+
+	int isCheckpointed;
+
+
+	/* Stuff to support block offsetting to support start block zero */
+	int internalStartBlock;
+	int internalEndBlock;
+	int blockOffset;
+	int chunkOffset;
+
+
+	/* Runtime checkpointing stuff */
+	int checkpointPageSequence;   /* running sequence number of checkpoint pages */
+	int checkpointByteCount;
+	int checkpointByteOffset;
+	__u8 *checkpointBuffer;
+	int checkpointOpenForWrite;
+	int blocksInCheckpoint;
+	int checkpointCurrentChunk;
+	int checkpointCurrentBlock;
+	int checkpointNextBlock;
+	int *checkpointBlockList;
+	int checkpointMaxBlocks;
+	__u32 checkpointSum;
+	__u32 checkpointXor;
+
+	/* Block Info */
+	yaffs_BlockInfo *blockInfo;
+	__u8 *chunkBits;	/* bitmap of chunks in use */
+	unsigned blockInfoAlt:1;	/* was allocated using alternative strategy */
+	unsigned chunkBitsAlt:1;	/* was allocated using alternative strategy */
+	int chunkBitmapStride;	/* Number of bytes of chunkBits per block.
+				 * Must be consistent with nChunksPerBlock.
+				 */
+
+	int nErasedBlocks;
+	int allocationBlock;	/* Current block being allocated off */
+	__u32 allocationPage;
+	int allocationBlockFinder;	/* Used to search for next allocation block */
+
+	/* Runtime state */
+	int nTnodesCreated;
+	yaffs_Tnode *freeTnodes;
+	int nFreeTnodes;
+	yaffs_TnodeList *allocatedTnodeList;
+
+	int isDoingGC;
+
+	int nObjectsCreated;
+	yaffs_Object *freeObjects;
+	int nFreeObjects;
+
+	yaffs_ObjectList *allocatedObjectList;
+
+	yaffs_ObjectBucket objectBucket[YAFFS_NOBJECT_BUCKETS];
+
+	int nFreeChunks;
+
+	int currentDirtyChecker;	/* Used to find current dirtiest block */
+
+	__u32 *gcCleanupList;	/* objects to delete at the end of a GC. */
+	int nonAggressiveSkip;	/* GC state/mode */
+
+	/* Statistcs */
+	int nPageWrites;
+	int nPageReads;
+	int nBlockErasures;
+	int nErasureFailures;
+	int nGCCopies;
+	int garbageCollections;
+	int passiveGarbageCollections;
+	int nRetriedWrites;
+	int nRetiredBlocks;
+	int eccFixed;
+	int eccUnfixed;
+	int tagsEccFixed;
+	int tagsEccUnfixed;
+	int nDeletions;
+	int nUnmarkedDeletions;
+
+	int hasPendingPrioritisedGCs; /* We think this device might have pending prioritised gcs */
+
+	/* Special directories */
+	yaffs_Object *rootDir;
+	yaffs_Object *lostNFoundDir;
+
+	/* Buffer areas for storing data to recover from write failures TODO
+	 *      __u8            bufferedData[YAFFS_CHUNKS_PER_BLOCK][YAFFS_BYTES_PER_CHUNK];
+	 *      yaffs_Spare bufferedSpare[YAFFS_CHUNKS_PER_BLOCK];
+	 */
+
+	int bufferedBlock;	/* Which block is buffered here? */
+	int doingBufferedBlockRewrite;
+
+	yaffs_ChunkCache *srCache;
+	int srLastUse;
+
+	int cacheHits;
+
+	/* Stuff for background deletion and unlinked files.*/
+	yaffs_Object *unlinkedDir;	/* Directory where unlinked and deleted files live. */
+	yaffs_Object *deletedDir;	/* Directory where deleted objects are sent to disappear. */
+	yaffs_Object *unlinkedDeletion;	/* Current file being background deleted.*/
+	int nDeletedFiles;		/* Count of files awaiting deletion;*/
+	int nUnlinkedFiles;		/* Count of unlinked files. */
+	int nBackgroundDeletions;	/* Count of background deletions. */
+
+
+	yaffs_TempBuffer tempBuffer[YAFFS_N_TEMP_BUFFERS];
+	int maxTemp;
+	int unmanagedTempAllocations;
+	int unmanagedTempDeallocations;
+
+	/* yaffs2 runtime stuff */
+	unsigned sequenceNumber;	/* Sequence number of currently allocating block */
+	unsigned oldestDirtySequence;
+
+};
+
+typedef struct yaffs_DeviceStruct yaffs_Device;
+
+/* The static layout of bllock usage etc is stored in the super block header */
+typedef struct {
+        int StructType;
+	int version;
+	int checkpointStartBlock;
+	int checkpointEndBlock;
+	int startBlock;
+	int endBlock;
+	int rfu[100];
+} yaffs_SuperBlockHeader;
+
+/* The CheckpointDevice structure holds the device information that changes at runtime and
+ * must be preserved over unmount/mount cycles.
+ */
+typedef struct {
+        int structType;
+	int nErasedBlocks;
+	int allocationBlock;	/* Current block being allocated off */
+	__u32 allocationPage;
+	int nFreeChunks;
+
+	int nDeletedFiles;		/* Count of files awaiting deletion;*/
+	int nUnlinkedFiles;		/* Count of unlinked files. */
+	int nBackgroundDeletions;	/* Count of background deletions. */
+
+	/* yaffs2 runtime stuff */
+	unsigned sequenceNumber;	/* Sequence number of currently allocating block */
+	unsigned oldestDirtySequence;
+
+} yaffs_CheckpointDevice;
+
+
+typedef struct {
+    int structType;
+    __u32 magic;
+    __u32 version;
+    __u32 head;
+} yaffs_CheckpointValidity;
+
+/* Function to manipulate block info */
+static Y_INLINE yaffs_BlockInfo *yaffs_GetBlockInfo(yaffs_Device * dev, int blk)
+{
+	if (blk < dev->internalStartBlock || blk > dev->internalEndBlock) {
+		T(YAFFS_TRACE_ERROR,
+		  (TSTR
+		   ("**>> yaffs: getBlockInfo block %d is not valid" TENDSTR),
+		   blk));
+		YBUG();
+	}
+	return &dev->blockInfo[blk - dev->internalStartBlock];
+}
+
+/*----------------------- YAFFS Functions -----------------------*/
+
+int yaffs_GutsInitialise(yaffs_Device * dev);
+void yaffs_Deinitialise(yaffs_Device * dev);
+
+int yaffs_GetNumberOfFreeChunks(yaffs_Device * dev);
+
+int yaffs_RenameObject(yaffs_Object * oldDir, const YCHAR * oldName,
+		       yaffs_Object * newDir, const YCHAR * newName);
+
+int yaffs_Unlink(yaffs_Object * dir, const YCHAR * name);
+int yaffs_DeleteFile(yaffs_Object * obj);
+
+int yaffs_GetObjectName(yaffs_Object * obj, YCHAR * name, int buffSize);
+int yaffs_GetObjectFileLength(yaffs_Object * obj);
+int yaffs_GetObjectInode(yaffs_Object * obj);
+unsigned yaffs_GetObjectType(yaffs_Object * obj);
+int yaffs_GetObjectLinkCount(yaffs_Object * obj);
+
+int yaffs_SetAttributes(yaffs_Object * obj, struct iattr *attr);
+int yaffs_GetAttributes(yaffs_Object * obj, struct iattr *attr);
+
+/* File operations */
+int yaffs_ReadDataFromFile(yaffs_Object * obj, __u8 * buffer, loff_t offset,
+			   int nBytes);
+int yaffs_WriteDataToFile(yaffs_Object * obj, const __u8 * buffer, loff_t offset,
+			  int nBytes, int writeThrough);
+int yaffs_ResizeFile(yaffs_Object * obj, loff_t newSize);
+
+yaffs_Object *yaffs_MknodFile(yaffs_Object * parent, const YCHAR * name,
+			      __u32 mode, __u32 uid, __u32 gid);
+int yaffs_FlushFile(yaffs_Object * obj, int updateTime);
+
+/* Flushing and checkpointing */
+void yaffs_FlushEntireDeviceCache(yaffs_Device *dev);
+
+int yaffs_CheckpointSave(yaffs_Device *dev);
+int yaffs_CheckpointRestore(yaffs_Device *dev);
+
+/* Directory operations */
+yaffs_Object *yaffs_MknodDirectory(yaffs_Object * parent, const YCHAR * name,
+				   __u32 mode, __u32 uid, __u32 gid);
+yaffs_Object *yaffs_FindObjectByName(yaffs_Object * theDir, const YCHAR * name);
+int yaffs_ApplyToDirectoryChildren(yaffs_Object * theDir,
+				   int (*fn) (yaffs_Object *));
+
+yaffs_Object *yaffs_FindObjectByNumber(yaffs_Device * dev, __u32 number);
+
+/* Link operations */
+yaffs_Object *yaffs_Link(yaffs_Object * parent, const YCHAR * name,
+			 yaffs_Object * equivalentObject);
+
+yaffs_Object *yaffs_GetEquivalentObject(yaffs_Object * obj);
+
+/* Symlink operations */
+yaffs_Object *yaffs_MknodSymLink(yaffs_Object * parent, const YCHAR * name,
+				 __u32 mode, __u32 uid, __u32 gid,
+				 const YCHAR * alias);
+YCHAR *yaffs_GetSymlinkAlias(yaffs_Object * obj);
+
+/* Special inodes (fifos, sockets and devices) */
+yaffs_Object *yaffs_MknodSpecial(yaffs_Object * parent, const YCHAR * name,
+				 __u32 mode, __u32 uid, __u32 gid, __u32 rdev);
+
+/* Special directories */
+yaffs_Object *yaffs_Root(yaffs_Device * dev);
+yaffs_Object *yaffs_LostNFound(yaffs_Device * dev);
+
+#ifdef CONFIG_YAFFS_WINCE
+/* CONFIG_YAFFS_WINCE special stuff */
+void yfsd_WinFileTimeNow(__u32 target[2]);
+#endif
+
+#ifdef __KERNEL__
+
+void yaffs_HandleDeferedFree(yaffs_Object * obj);
+#endif
+
+/* Debug dump  */
+int yaffs_DumpObject(yaffs_Object * obj);
+
+void yaffs_GutsTest(yaffs_Device * dev);
+
+/* A few useful functions */
+void yaffs_InitialiseTags(yaffs_ExtendedTags * tags);
+void yaffs_DeleteChunk(yaffs_Device * dev, int chunkId, int markNAND, int lyn);
+int yaffs_CheckFF(__u8 * buffer, int nBytes);
+void yaffs_HandleChunkError(yaffs_Device *dev, yaffs_BlockInfo *bi);
+
+#endif
diff --git a/target/linux/generic/files/fs/yaffs2/yaffs_mtdif.c b/target/linux/generic/files/fs/yaffs2/yaffs_mtdif.c
new file mode 100644
index 0000000000..466e5a44c6
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/yaffs_mtdif.c
@@ -0,0 +1,241 @@
+/*
+ * YAFFS: Yet Another Flash File System. A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ *   for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+const char *yaffs_mtdif_c_version =
+    "$Id: yaffs_mtdif.c,v 1.19 2007-02-14 01:09:06 wookey Exp $";
+
+#include "yportenv.h"
+
+
+#include "yaffs_mtdif.h"
+
+#include "linux/mtd/mtd.h"
+#include "linux/types.h"
+#include "linux/time.h"
+#include "linux/mtd/nand.h"
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18))
+static struct nand_oobinfo yaffs_oobinfo = {
+	.useecc = 1,
+	.eccbytes = 6,
+	.eccpos = {8, 9, 10, 13, 14, 15}
+};
+
+static struct nand_oobinfo yaffs_noeccinfo = {
+	.useecc = 0,
+};
+#endif
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+static inline void translate_spare2oob(const yaffs_Spare *spare, __u8 *oob)
+{
+	oob[0] = spare->tagByte0;
+	oob[1] = spare->tagByte1;
+	oob[2] = spare->tagByte2;
+	oob[3] = spare->tagByte3;
+	oob[4] = spare->tagByte4;
+	oob[5] = spare->tagByte5 & 0x3f;
+	oob[5] |= spare->blockStatus == 'Y' ? 0: 0x80;
+	oob[5] |= spare->pageStatus == 0 ? 0: 0x40;
+	oob[6] = spare->tagByte6;
+	oob[7] = spare->tagByte7;
+}
+
+static inline void translate_oob2spare(yaffs_Spare *spare, __u8 *oob)
+{
+	struct yaffs_NANDSpare *nspare = (struct yaffs_NANDSpare *)spare;
+	spare->tagByte0 = oob[0];
+	spare->tagByte1 = oob[1];
+	spare->tagByte2 = oob[2];
+	spare->tagByte3 = oob[3];
+	spare->tagByte4 = oob[4];
+	spare->tagByte5 = oob[5] == 0xff ? 0xff : oob[5] & 0x3f;
+	spare->blockStatus = oob[5] & 0x80 ? 0xff : 'Y';
+	spare->pageStatus = oob[5] & 0x40 ? 0xff : 0;
+	spare->ecc1[0] = spare->ecc1[1] = spare->ecc1[2] = 0xff;
+	spare->tagByte6 = oob[6];
+	spare->tagByte7 = oob[7];
+	spare->ecc2[0] = spare->ecc2[1] = spare->ecc2[2] = 0xff;
+
+	nspare->eccres1 = nspare->eccres2 = 0; /* FIXME */
+}
+#endif
+
+int nandmtd_WriteChunkToNAND(yaffs_Device * dev, int chunkInNAND,
+			     const __u8 * data, const yaffs_Spare * spare)
+{
+	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+	struct mtd_oob_ops ops;
+#endif
+	size_t dummy;
+	int retval = 0;
+
+	loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+	__u8 spareAsBytes[8]; /* OOB */
+
+	if (data && !spare)
+		retval = mtd->write(mtd, addr, dev->nDataBytesPerChunk,
+				&dummy, data);
+	else if (spare) {
+		if (dev->useNANDECC) {
+			translate_spare2oob(spare, spareAsBytes);
+			ops.mode = MTD_OOB_AUTO;
+			ops.ooblen = 8; /* temp hack */
+		} else {
+			ops.mode = MTD_OOB_RAW;
+			ops.ooblen = YAFFS_BYTES_PER_SPARE;
+		}
+		ops.len = data ? dev->nDataBytesPerChunk : ops.ooblen;
+		ops.datbuf = (u8 *)data;
+		ops.ooboffs = 0;
+		ops.oobbuf = spareAsBytes;
+		retval = mtd->write_oob(mtd, addr, &ops);
+	}
+#else
+	__u8 *spareAsBytes = (__u8 *) spare;
+
+	if (data && spare) {
+		if (dev->useNANDECC)
+			retval =
+			    mtd->write_ecc(mtd, addr, dev->nDataBytesPerChunk,
+					   &dummy, data, spareAsBytes,
+					   &yaffs_oobinfo);
+		else
+			retval =
+			    mtd->write_ecc(mtd, addr, dev->nDataBytesPerChunk,
+					   &dummy, data, spareAsBytes,
+					   &yaffs_noeccinfo);
+	} else {
+		if (data)
+			retval =
+			    mtd->write(mtd, addr, dev->nDataBytesPerChunk, &dummy,
+				       data);
+		if (spare)
+			retval =
+			    mtd->write_oob(mtd, addr, YAFFS_BYTES_PER_SPARE,
+					   &dummy, spareAsBytes);
+	}
+#endif
+
+	if (retval == 0)
+		return YAFFS_OK;
+	else
+		return YAFFS_FAIL;
+}
+
+int nandmtd_ReadChunkFromNAND(yaffs_Device * dev, int chunkInNAND, __u8 * data,
+			      yaffs_Spare * spare)
+{
+	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+	struct mtd_oob_ops ops;
+#endif
+	size_t dummy;
+	int retval = 0;
+
+	loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+	__u8 spareAsBytes[8]; /* OOB */
+
+	if (data && !spare)
+		retval = mtd->read(mtd, addr, dev->nDataBytesPerChunk,
+				&dummy, data);
+	else if (spare) {
+		if (dev->useNANDECC) {
+			ops.mode = MTD_OOB_AUTO;
+			ops.ooblen = 8; /* temp hack */
+		} else {
+			ops.mode = MTD_OOB_RAW;
+			ops.ooblen = YAFFS_BYTES_PER_SPARE;
+		}
+		ops.len = data ? dev->nDataBytesPerChunk : ops.ooblen;
+		ops.datbuf = data;
+		ops.ooboffs = 0;
+		ops.oobbuf = spareAsBytes;
+		retval = mtd->read_oob(mtd, addr, &ops);
+		if (dev->useNANDECC)
+			translate_oob2spare(spare, spareAsBytes);
+	}
+#else
+	__u8 *spareAsBytes = (__u8 *) spare;
+
+	if (data && spare) {
+		if (dev->useNANDECC) {
+			/* Careful, this call adds 2 ints */
+			/* to the end of the spare data.  Calling function */
+			/* should allocate enough memory for spare, */
+			/* i.e. [YAFFS_BYTES_PER_SPARE+2*sizeof(int)]. */
+			retval =
+			    mtd->read_ecc(mtd, addr, dev->nDataBytesPerChunk,
+					  &dummy, data, spareAsBytes,
+					  &yaffs_oobinfo);
+		} else {
+			retval =
+			    mtd->read_ecc(mtd, addr, dev->nDataBytesPerChunk,
+					  &dummy, data, spareAsBytes,
+					  &yaffs_noeccinfo);
+		}
+	} else {
+		if (data)
+			retval =
+			    mtd->read(mtd, addr, dev->nDataBytesPerChunk, &dummy,
+				      data);
+		if (spare)
+			retval =
+			    mtd->read_oob(mtd, addr, YAFFS_BYTES_PER_SPARE,
+					  &dummy, spareAsBytes);
+	}
+#endif
+
+	if (retval == 0)
+		return YAFFS_OK;
+	else
+		return YAFFS_FAIL;
+}
+
+int nandmtd_EraseBlockInNAND(yaffs_Device * dev, int blockNumber)
+{
+	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+	__u32 addr =
+	    ((loff_t) blockNumber) * dev->nDataBytesPerChunk
+		* dev->nChunksPerBlock;
+	struct erase_info ei;
+	int retval = 0;
+
+	ei.mtd = mtd;
+	ei.addr = addr;
+	ei.len = dev->nDataBytesPerChunk * dev->nChunksPerBlock;
+	ei.time = 1000;
+	ei.retries = 2;
+	ei.callback = NULL;
+	ei.priv = (u_long) dev;
+
+	/* Todo finish off the ei if required */
+
+	sema_init(&dev->sem, 0);
+
+	retval = mtd->erase(mtd, &ei);
+
+	if (retval == 0)
+		return YAFFS_OK;
+	else
+		return YAFFS_FAIL;
+}
+
+int nandmtd_InitialiseNAND(yaffs_Device * dev)
+{
+	return YAFFS_OK;
+}
+
diff --git a/target/linux/generic/files/fs/yaffs2/yaffs_mtdif.h b/target/linux/generic/files/fs/yaffs2/yaffs_mtdif.h
new file mode 100644
index 0000000000..317600cac9
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/yaffs_mtdif.h
@@ -0,0 +1,27 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ *   for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+#ifndef __YAFFS_MTDIF_H__
+#define __YAFFS_MTDIF_H__
+
+#include "yaffs_guts.h"
+
+int nandmtd_WriteChunkToNAND(yaffs_Device * dev, int chunkInNAND,
+			     const __u8 * data, const yaffs_Spare * spare);
+int nandmtd_ReadChunkFromNAND(yaffs_Device * dev, int chunkInNAND, __u8 * data,
+			      yaffs_Spare * spare);
+int nandmtd_EraseBlockInNAND(yaffs_Device * dev, int blockNumber);
+int nandmtd_InitialiseNAND(yaffs_Device * dev);
+#endif
diff --git a/target/linux/generic/files/fs/yaffs2/yaffs_mtdif1-compat.c b/target/linux/generic/files/fs/yaffs2/yaffs_mtdif1-compat.c
new file mode 100644
index 0000000000..6a376f1f72
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/yaffs_mtdif1-compat.c
@@ -0,0 +1,434 @@
+From ian@brightstareng.com Fri May 18 15:06:49 2007
+From ian@brightstareng.com Fri May 18 15:08:21 2007
+Received: from 206.173.66.57.ptr.us.xo.net ([206.173.66.57] helo=zebra.brightstareng.com)
+	by apollo.linkchoose.co.uk with esmtp (Exim 4.60)
+	(envelope-from <ian@brightstareng.com>)
+	id 1Hp380-00011e-T6
+	for david.goodenough@linkchoose.co.uk; Fri, 18 May 2007 15:08:21 +0100
+Received: from localhost (localhost.localdomain [127.0.0.1])
+	by zebra.brightstareng.com (Postfix) with ESMTP
+	id 4819F28C004; Fri, 18 May 2007 10:07:49 -0400 (EDT)
+Received: from zebra.brightstareng.com ([127.0.0.1])
+ by localhost (zebra [127.0.0.1]) (amavisd-new, port 10024) with ESMTP
+ id 05328-06; Fri, 18 May 2007 10:07:16 -0400 (EDT)
+Received: from pippin (unknown [192.168.1.25])
+	by zebra.brightstareng.com (Postfix) with ESMTP
+	id 8BEF528C1BC; Fri, 18 May 2007 10:06:53 -0400 (EDT)
+From: Ian McDonnell <ian@brightstareng.com>
+To: David Goodenough <david.goodenough@linkchoose.co.uk>
+Subject: Re: something tested this time -- yaffs_mtdif1-compat.c
+Date: Fri, 18 May 2007 10:06:49 -0400
+User-Agent: KMail/1.9.1
+References: <200705142207.06909.ian@brightstareng.com> <200705171131.53536.ian@brightstareng.com> <200705181334.32166.david.goodenough@linkchoose.co.uk>
+In-Reply-To: <200705181334.32166.david.goodenough@linkchoose.co.uk>
+Cc: Andrea Conti <alyf@alyf.net>,
+ Charles Manning <manningc2@actrix.gen.nz>
+MIME-Version: 1.0
+Content-Type: Multipart/Mixed;
+  boundary="Boundary-00=_5LbTGmt62YoutxM"
+Message-Id: <200705181006.49860.ian@brightstareng.com>
+X-Virus-Scanned: by amavisd-new at brightstareng.com
+Status: R
+X-Status: NT
+X-KMail-EncryptionState:
+X-KMail-SignatureState:
+X-KMail-MDN-Sent:
+
+--Boundary-00=_5LbTGmt62YoutxM
+Content-Type: text/plain;
+  charset="iso-8859-15"
+Content-Transfer-Encoding: 7bit
+Content-Disposition: inline
+
+David, Andrea,
+
+On Friday 18 May 2007 08:34, you wrote:
+> Yea team.  With this fix in place (I put it in the wrong place
+> at first) I can now mount and ls the Yaffs partition without
+> an error messages!
+
+Good news!
+
+Attached is a newer yaffs_mtdif1.c with a bandaid to help the
+2.6.18 and 2.6.19 versions of MTD not trip on the oob read.
+See the LINUX_VERSION_CODE conditional in
+nandmtd1_ReadChunkWithTagsFromNAND.
+
+-imcd
+
+--Boundary-00=_5LbTGmt62YoutxM
+Content-Type: text/x-csrc;
+  charset="iso-8859-15";
+  name="yaffs_mtdif1.c"
+Content-Transfer-Encoding: 7bit
+Content-Disposition: attachment;
+	filename="yaffs_mtdif1.c"
+
+/*
+ * YAFFS: Yet another FFS. A NAND-flash specific file system.
+ * yaffs_mtdif1.c  NAND mtd interface functions for small-page NAND.
+ *
+ * Copyright (C) 2002 Aleph One Ltd.
+ *   for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * This module provides the interface between yaffs_nand.c and the
+ * MTD API.  This version is used when the MTD interface supports the
+ * 'mtd_oob_ops' style calls to read_oob and write_oob, circa 2.6.17,
+ * and we have small-page NAND device.
+ *
+ * These functions are invoked via function pointers in yaffs_nand.c.
+ * This replaces functionality provided by functions in yaffs_mtdif.c
+ * and the yaffs_TagsCompatability functions in yaffs_tagscompat.c that are
+ * called in yaffs_mtdif.c when the function pointers are NULL.
+ * We assume the MTD layer is performing ECC (useNANDECC is true).
+ */
+
+#include "yportenv.h"
+#include "yaffs_guts.h"
+#include "yaffs_packedtags1.h"
+#include "yaffs_tagscompat.h"	// for yaffs_CalcTagsECC
+
+#include "linux/kernel.h"
+#include "linux/version.h"
+#include "linux/types.h"
+#include "linux/mtd/mtd.h"
+
+/* Don't compile this module if we don't have MTD's mtd_oob_ops interface */
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+
+const char *yaffs_mtdif1_c_version = "$Id$";
+
+#ifndef CONFIG_YAFFS_9BYTE_TAGS
+# define YTAG1_SIZE 8
+#else
+# define YTAG1_SIZE 9
+#endif
+
+#if 0
+/* Use the following nand_ecclayout with MTD when using
+ * CONFIG_YAFFS_9BYTE_TAGS and the older on-NAND tags layout.
+ * If you have existing Yaffs images and the byte order differs from this,
+ * adjust 'oobfree' to match your existing Yaffs data.
+ *
+ * This nand_ecclayout scatters/gathers to/from the old-yaffs layout with the
+ * pageStatus byte (at NAND spare offset 4) scattered/gathered from/to
+ * the 9th byte.
+ *
+ * Old-style on-NAND format: T0,T1,T2,T3,P,B,T4,T5,E0,E1,E2,T6,T7,E3,E4,E5
+ * We have/need PackedTags1 plus pageStatus: T0,T1,T2,T3,T4,T5,T6,T7,P
+ * where Tn are the tag bytes, En are MTD's ECC bytes, P is the pageStatus
+ * byte and B is the small-page bad-block indicator byte.
+ */
+static struct nand_ecclayout nand_oob_16 = {
+	.eccbytes = 6,
+	.eccpos = { 8, 9, 10, 13, 14, 15 },
+	.oobavail = 9,
+	.oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
+};
+#endif
+
+/* Write a chunk (page) of data to NAND.
+ *
+ * Caller always provides ExtendedTags data which are converted to a more
+ * compact (packed) form for storage in NAND.  A mini-ECC runs over the
+ * contents of the tags meta-data; used to valid the tags when read.
+ *
+ *  - Pack ExtendedTags to PackedTags1 form
+ *  - Compute mini-ECC for PackedTags1
+ *  - Write data and packed tags to NAND.
+ *
+ * Note: Due to the use of the PackedTags1 meta-data which does not include
+ * a full sequence number (as found in the larger PackedTags2 form) it is
+ * necessary for Yaffs to re-write a chunk/page (just once) to mark it as
+ * discarded and dirty.  This is not ideal: newer NAND parts are supposed
+ * to be written just once.  When Yaffs performs this operation, this
+ * function is called with a NULL data pointer -- calling MTD write_oob
+ * without data is valid usage (2.6.17).
+ *
+ * Any underlying MTD error results in YAFFS_FAIL.
+ * Returns YAFFS_OK or YAFFS_FAIL.
+ */
+int nandmtd1_WriteChunkWithTagsToNAND(yaffs_Device *dev,
+	int chunkInNAND, const __u8 * data, const yaffs_ExtendedTags * etags)
+{
+	struct mtd_info * mtd = dev->genericDevice;
+	int chunkBytes = dev->nDataBytesPerChunk;
+	loff_t addr = ((loff_t)chunkInNAND) * chunkBytes;
+	struct mtd_oob_ops ops;
+	yaffs_PackedTags1 pt1;
+	int retval;
+
+	/* we assume that PackedTags1 and yaffs_Tags are compatible */
+	compile_time_assertion(sizeof(yaffs_PackedTags1) == 12);
+	compile_time_assertion(sizeof(yaffs_Tags) == 8);
+
+	yaffs_PackTags1(&pt1, etags);
+	yaffs_CalcTagsECC((yaffs_Tags *)&pt1);
+
+	/* When deleting a chunk, the upper layer provides only skeletal
+	 * etags, one with chunkDeleted set.  However, we need to update the
+	 * tags, not erase them completely.  So we use the NAND write property
+	 * that only zeroed-bits stick and set tag bytes to all-ones and
+	 * zero just the (not) deleted bit.
+	 */
+#ifndef CONFIG_YAFFS_9BYTE_TAGS
+	if (etags->chunkDeleted) {
+		memset(&pt1, 0xff, 8);
+		/* clear delete status bit to indicate deleted */
+		pt1.deleted = 0;
+	}
+#else
+	((__u8 *)&pt1)[8] = 0xff;
+	if (etags->chunkDeleted) {
+		memset(&pt1, 0xff, 8);
+		/* zero pageStatus byte to indicate deleted */
+		((__u8 *)&pt1)[8] = 0;
+	}
+#endif
+
+	memset(&ops, 0, sizeof(ops));
+	ops.mode = MTD_OOB_AUTO;
+	ops.len = (data) ? chunkBytes : 0;
+	ops.ooblen = YTAG1_SIZE;
+	ops.datbuf = (__u8 *)data;
+	ops.oobbuf = (__u8 *)&pt1;
+
+	retval = mtd->write_oob(mtd, addr, &ops);
+	if (retval) {
+		yaffs_trace(YAFFS_TRACE_MTD,
+			"write_oob failed, chunk %d, mtd error %d\n",
+			chunkInNAND, retval);
+	}
+	return retval ? YAFFS_FAIL : YAFFS_OK;
+}
+
+/* Return with empty ExtendedTags but add eccResult.
+ */
+static int rettags(yaffs_ExtendedTags * etags, int eccResult, int retval)
+{
+	if (etags) {
+		memset(etags, 0, sizeof(*etags));
+		etags->eccResult = eccResult;
+	}
+	return retval;
+}
+
+/* Read a chunk (page) from NAND.
+ *
+ * Caller expects ExtendedTags data to be usable even on error; that is,
+ * all members except eccResult and blockBad are zeroed.
+ *
+ *  - Check ECC results for data (if applicable)
+ *  - Check for blank/erased block (return empty ExtendedTags if blank)
+ *  - Check the PackedTags1 mini-ECC (correct if necessary/possible)
+ *  - Convert PackedTags1 to ExtendedTags
+ *  - Update eccResult and blockBad members to refect state.
+ *
+ * Returns YAFFS_OK or YAFFS_FAIL.
+ */
+int nandmtd1_ReadChunkWithTagsFromNAND(yaffs_Device *dev,
+	int chunkInNAND, __u8 * data, yaffs_ExtendedTags * etags)
+{
+	struct mtd_info * mtd = dev->genericDevice;
+	int chunkBytes = dev->nDataBytesPerChunk;
+	loff_t addr = ((loff_t)chunkInNAND) * chunkBytes;
+	int eccres = YAFFS_ECC_RESULT_NO_ERROR;
+	struct mtd_oob_ops ops;
+	yaffs_PackedTags1 pt1;
+	int retval;
+	int deleted;
+
+	memset(&ops, 0, sizeof(ops));
+	ops.mode = MTD_OOB_AUTO;
+	ops.len = (data) ? chunkBytes : 0;
+	ops.ooblen = YTAG1_SIZE;
+	ops.datbuf = data;
+	ops.oobbuf = (__u8 *)&pt1;
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20))
+	/* In MTD 2.6.18 to 2.6.19 nand_base.c:nand_do_read_oob() has a bug;
+	 * help it out with ops.len = ops.ooblen when ops.datbuf == NULL.
+	 */
+	ops.len = (ops.datbuf) ? ops.len : ops.ooblen;
+#endif
+	/* Read page and oob using MTD.
+	 * Check status and determine ECC result.
+	 */
+	retval = mtd->read_oob(mtd, addr, &ops);
+	if (retval) {
+		yaffs_trace(YAFFS_TRACE_MTD,
+			"read_oob failed, chunk %d, mtd error %d\n",
+			chunkInNAND, retval);
+	}
+
+	switch (retval) {
+	case 0:
+		/* no error */
+		break;
+
+	case -EUCLEAN:
+		/* MTD's ECC fixed the data */
+		eccres = YAFFS_ECC_RESULT_FIXED;
+		dev->eccFixed++;
+		break;
+
+	case -EBADMSG:
+		/* MTD's ECC could not fix the data */
+		dev->eccUnfixed++;
+		/* fall into... */
+	default:
+		rettags(etags, YAFFS_ECC_RESULT_UNFIXED, 0);
+		etags->blockBad = (mtd->block_isbad)(mtd, addr);
+		return YAFFS_FAIL;
+	}
+
+	/* Check for a blank/erased chunk.
+	 */
+	if (yaffs_CheckFF((__u8 *)&pt1, 8)) {
+		/* when blank, upper layers want eccResult to be <= NO_ERROR */
+		return rettags(etags, YAFFS_ECC_RESULT_NO_ERROR, YAFFS_OK);
+	}
+
+#ifndef CONFIG_YAFFS_9BYTE_TAGS
+	/* Read deleted status (bit) then return it to it's non-deleted
+	 * state before performing tags mini-ECC check. pt1.deleted is
+	 * inverted.
+	 */
+	deleted = !pt1.deleted;
+	pt1.deleted = 1;
+#else
+	(void) deleted; /* not used */
+#endif
+
+	/* Check the packed tags mini-ECC and correct if necessary/possible.
+	 */
+	retval = yaffs_CheckECCOnTags((yaffs_Tags *)&pt1);
+	switch (retval) {
+	case 0:
+		/* no tags error, use MTD result */
+		break;
+	case 1:
+		/* recovered tags-ECC error */
+		dev->tagsEccFixed++;
+		eccres = YAFFS_ECC_RESULT_FIXED;
+		break;
+	default:
+		/* unrecovered tags-ECC error */
+		dev->tagsEccUnfixed++;
+		return rettags(etags, YAFFS_ECC_RESULT_UNFIXED, YAFFS_FAIL);
+	}
+
+	/* Unpack the tags to extended form and set ECC result.
+	 * [set shouldBeFF just to keep yaffs_UnpackTags1 happy]
+	 */
+	pt1.shouldBeFF = 0xFFFFFFFF;
+	yaffs_UnpackTags1(etags, &pt1);
+	etags->eccResult = eccres;
+
+	/* Set deleted state.
+	 */
+#ifndef CONFIG_YAFFS_9BYTE_TAGS
+	etags->chunkDeleted = deleted;
+#else
+	etags->chunkDeleted = (yaffs_CountBits(((__u8 *)&pt1)[8]) < 7);
+#endif
+	return YAFFS_OK;
+}
+
+/* Mark a block bad.
+ *
+ * This is a persistant state.
+ * Use of this function should be rare.
+ *
+ * Returns YAFFS_OK or YAFFS_FAIL.
+ */
+int nandmtd1_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo)
+{
+	struct mtd_info * mtd = dev->genericDevice;
+	int blocksize = dev->nChunksPerBlock * dev->nDataBytesPerChunk;
+	int retval;
+
+	yaffs_trace(YAFFS_TRACE_BAD_BLOCKS, "marking block %d bad", blockNo);
+
+	retval = mtd->block_markbad(mtd, (loff_t)blocksize * blockNo);
+	return (retval) ? YAFFS_FAIL : YAFFS_OK;
+}
+
+/* Check any MTD prerequists.
+ *
+ * Returns YAFFS_OK or YAFFS_FAIL.
+ */
+static int nandmtd1_TestPrerequists(struct mtd_info * mtd)
+{
+	/* 2.6.18 has mtd->ecclayout->oobavail */
+	/* 2.6.21 has mtd->ecclayout->oobavail and mtd->oobavail */
+	int oobavail = mtd->ecclayout->oobavail;
+
+	if (oobavail < YTAG1_SIZE) {
+		yaffs_trace(YAFFS_TRACE_ERROR,
+			"mtd device has only %d bytes for tags, need %d",
+			oobavail, YTAG1_SIZE);
+		return YAFFS_FAIL;
+	}
+	return YAFFS_OK;
+}
+
+/* Query for the current state of a specific block.
+ *
+ * Examine the tags of the first chunk of the block and return the state:
+ *  - YAFFS_BLOCK_STATE_DEAD, the block is marked bad
+ *  - YAFFS_BLOCK_STATE_NEEDS_SCANNING, the block is in use
+ *  - YAFFS_BLOCK_STATE_EMPTY, the block is clean
+ *
+ * Always returns YAFFS_OK.
+ */
+int nandmtd1_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+	yaffs_BlockState * pState, int *pSequenceNumber)
+{
+	struct mtd_info * mtd = dev->genericDevice;
+	int chunkNo = blockNo * dev->nChunksPerBlock;
+	yaffs_ExtendedTags etags;
+	int state = YAFFS_BLOCK_STATE_DEAD;
+	int seqnum = 0;
+	int retval;
+
+	/* We don't yet have a good place to test for MTD config prerequists.
+	 * Do it here as we are called during the initial scan.
+	 */
+	if (nandmtd1_TestPrerequists(mtd) != YAFFS_OK) {
+		return YAFFS_FAIL;
+	}
+
+	retval = nandmtd1_ReadChunkWithTagsFromNAND(dev, chunkNo, NULL, &etags);
+	if (etags.blockBad) {
+		yaffs_trace(YAFFS_TRACE_BAD_BLOCKS,
+			"block %d is marked bad", blockNo);
+		state = YAFFS_BLOCK_STATE_DEAD;
+	}
+	else if (etags.chunkUsed) {
+		state = YAFFS_BLOCK_STATE_NEEDS_SCANNING;
+		seqnum = etags.sequenceNumber;
+	}
+	else {
+		state = YAFFS_BLOCK_STATE_EMPTY;
+	}
+
+	*pState = state;
+	*pSequenceNumber = seqnum;
+
+	/* query always succeeds */
+	return YAFFS_OK;
+}
+
+#endif /*KERNEL_VERSION*/
+
+--Boundary-00=_5LbTGmt62YoutxM--
+
+
+
diff --git a/target/linux/generic/files/fs/yaffs2/yaffs_mtdif1.c b/target/linux/generic/files/fs/yaffs2/yaffs_mtdif1.c
new file mode 100644
index 0000000000..36d5adec5c
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/yaffs_mtdif1.c
@@ -0,0 +1,363 @@
+/*
+ * YAFFS: Yet another FFS. A NAND-flash specific file system.
+ * yaffs_mtdif1.c  NAND mtd interface functions for small-page NAND.
+ *
+ * Copyright (C) 2002 Aleph One Ltd.
+ *   for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * This module provides the interface between yaffs_nand.c and the
+ * MTD API.  This version is used when the MTD interface supports the
+ * 'mtd_oob_ops' style calls to read_oob and write_oob, circa 2.6.17,
+ * and we have small-page NAND device.
+ *
+ * These functions are invoked via function pointers in yaffs_nand.c.
+ * This replaces functionality provided by functions in yaffs_mtdif.c
+ * and the yaffs_TagsCompatability functions in yaffs_tagscompat.c that are
+ * called in yaffs_mtdif.c when the function pointers are NULL.
+ * We assume the MTD layer is performing ECC (useNANDECC is true).
+ */
+
+#include "yportenv.h"
+#include "yaffs_guts.h"
+#include "yaffs_packedtags1.h"
+#include "yaffs_tagscompat.h"	// for yaffs_CalcTagsECC
+
+#include "linux/kernel.h"
+#include "linux/version.h"
+#include "linux/types.h"
+#include "linux/mtd/mtd.h"
+
+/* Don't compile this module if we don't have MTD's mtd_oob_ops interface */
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+
+const char *yaffs_mtdif1_c_version = "$Id: yaffs_mtdif1.c,v 1.3 2007/05/15 20:16:11 ian Exp $";
+
+#ifndef CONFIG_YAFFS_9BYTE_TAGS
+# define YTAG1_SIZE 8
+#else
+# define YTAG1_SIZE 9
+#endif
+
+#if 0
+/* Use the following nand_ecclayout with MTD when using
+ * CONFIG_YAFFS_9BYTE_TAGS and the older on-NAND tags layout.
+ * If you have existing Yaffs images and the byte order differs from this,
+ * adjust 'oobfree' to match your existing Yaffs data.
+ *
+ * This nand_ecclayout scatters/gathers to/from the old-yaffs layout with the
+ * pageStatus byte (at NAND spare offset 4) scattered/gathered from/to
+ * the 9th byte.
+ *
+ * Old-style on-NAND format: T0,T1,T2,T3,P,B,T4,T5,E0,E1,E2,T6,T7,E3,E4,E5
+ * We have/need PackedTags1 plus pageStatus: T0,T1,T2,T3,T4,T5,T6,T7,P
+ * where Tn are the tag bytes, En are MTD's ECC bytes, P is the pageStatus
+ * byte and B is the small-page bad-block indicator byte.
+ */
+static struct nand_ecclayout nand_oob_16 = {
+	.eccbytes = 6,
+	.eccpos = { 8, 9, 10, 13, 14, 15 },
+	.oobavail = 9,
+	.oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
+};
+#endif
+
+/* Write a chunk (page) of data to NAND.
+ *
+ * Caller always provides ExtendedTags data which are converted to a more
+ * compact (packed) form for storage in NAND.  A mini-ECC runs over the
+ * contents of the tags meta-data; used to valid the tags when read.
+ *
+ *  - Pack ExtendedTags to PackedTags1 form
+ *  - Compute mini-ECC for PackedTags1
+ *  - Write data and packed tags to NAND.
+ *
+ * Note: Due to the use of the PackedTags1 meta-data which does not include
+ * a full sequence number (as found in the larger PackedTags2 form) it is
+ * necessary for Yaffs to re-write a chunk/page (just once) to mark it as
+ * discarded and dirty.  This is not ideal: newer NAND parts are supposed
+ * to be written just once.  When Yaffs performs this operation, this
+ * function is called with a NULL data pointer -- calling MTD write_oob
+ * without data is valid usage (2.6.17).
+ *
+ * Any underlying MTD error results in YAFFS_FAIL.
+ * Returns YAFFS_OK or YAFFS_FAIL.
+ */
+int nandmtd1_WriteChunkWithTagsToNAND(yaffs_Device *dev,
+	int chunkInNAND, const __u8 * data, const yaffs_ExtendedTags * etags)
+{
+	struct mtd_info * mtd = dev->genericDevice;
+	int chunkBytes = dev->nDataBytesPerChunk;
+	loff_t addr = ((loff_t)chunkInNAND) * chunkBytes;
+	struct mtd_oob_ops ops;
+	yaffs_PackedTags1 pt1;
+	int retval;
+
+	/* we assume that PackedTags1 and yaffs_Tags are compatible */
+	compile_time_assertion(sizeof(yaffs_PackedTags1) == 12);
+	compile_time_assertion(sizeof(yaffs_Tags) == 8);
+
+	dev->nPageWrites++;
+
+	yaffs_PackTags1(&pt1, etags);
+	yaffs_CalcTagsECC((yaffs_Tags *)&pt1);
+
+	/* When deleting a chunk, the upper layer provides only skeletal
+	 * etags, one with chunkDeleted set.  However, we need to update the
+	 * tags, not erase them completely.  So we use the NAND write property
+	 * that only zeroed-bits stick and set tag bytes to all-ones and
+	 * zero just the (not) deleted bit.
+	 */
+#ifndef CONFIG_YAFFS_9BYTE_TAGS
+	if (etags->chunkDeleted) {
+		memset(&pt1, 0xff, 8);
+		/* clear delete status bit to indicate deleted */
+		pt1.deleted = 0;
+	}
+#else
+	((__u8 *)&pt1)[8] = 0xff;
+	if (etags->chunkDeleted) {
+		memset(&pt1, 0xff, 8);
+		/* zero pageStatus byte to indicate deleted */
+		((__u8 *)&pt1)[8] = 0;
+	}
+#endif
+
+	memset(&ops, 0, sizeof(ops));
+	ops.mode = MTD_OOB_AUTO;
+	ops.len = (data) ? chunkBytes : 0;
+	ops.ooblen = YTAG1_SIZE;
+	ops.datbuf = (__u8 *)data;
+	ops.oobbuf = (__u8 *)&pt1;
+
+	retval = mtd->write_oob(mtd, addr, &ops);
+	if (retval) {
+		yaffs_trace(YAFFS_TRACE_MTD,
+			"write_oob failed, chunk %d, mtd error %d\n",
+			chunkInNAND, retval);
+	}
+	return retval ? YAFFS_FAIL : YAFFS_OK;
+}
+
+/* Return with empty ExtendedTags but add eccResult.
+ */
+static int rettags(yaffs_ExtendedTags * etags, int eccResult, int retval)
+{
+	if (etags) {
+		memset(etags, 0, sizeof(*etags));
+		etags->eccResult = eccResult;
+	}
+	return retval;
+}
+
+/* Read a chunk (page) from NAND.
+ *
+ * Caller expects ExtendedTags data to be usable even on error; that is,
+ * all members except eccResult and blockBad are zeroed.
+ *
+ *  - Check ECC results for data (if applicable)
+ *  - Check for blank/erased block (return empty ExtendedTags if blank)
+ *  - Check the PackedTags1 mini-ECC (correct if necessary/possible)
+ *  - Convert PackedTags1 to ExtendedTags
+ *  - Update eccResult and blockBad members to refect state.
+ *
+ * Returns YAFFS_OK or YAFFS_FAIL.
+ */
+int nandmtd1_ReadChunkWithTagsFromNAND(yaffs_Device *dev,
+	int chunkInNAND, __u8 * data, yaffs_ExtendedTags * etags)
+{
+	struct mtd_info * mtd = dev->genericDevice;
+	int chunkBytes = dev->nDataBytesPerChunk;
+	loff_t addr = ((loff_t)chunkInNAND) * chunkBytes;
+	int eccres = YAFFS_ECC_RESULT_NO_ERROR;
+	struct mtd_oob_ops ops;
+	yaffs_PackedTags1 pt1;
+	int retval;
+	int deleted;
+
+	dev->nPageReads++;
+
+	memset(&ops, 0, sizeof(ops));
+	ops.mode = MTD_OOB_AUTO;
+	ops.len = (data) ? chunkBytes : 0;
+	ops.ooblen = YTAG1_SIZE;
+	ops.datbuf = data;
+	ops.oobbuf = (__u8 *)&pt1;
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20))
+	/* In MTD 2.6.18 to 2.6.19 nand_base.c:nand_do_read_oob() has a bug;
+	 * help it out with ops.len = ops.ooblen when ops.datbuf == NULL.
+	 */
+	ops.len = (ops.datbuf) ? ops.len : ops.ooblen;
+#endif
+	/* Read page and oob using MTD.
+	 * Check status and determine ECC result.
+	 */
+	retval = mtd->read_oob(mtd, addr, &ops);
+	if (retval) {
+		yaffs_trace(YAFFS_TRACE_MTD,
+			"read_oob failed, chunk %d, mtd error %d\n",
+			chunkInNAND, retval);
+	}
+
+	switch (retval) {
+	case 0:
+		/* no error */
+		break;
+
+	case -EUCLEAN:
+		/* MTD's ECC fixed the data */
+		eccres = YAFFS_ECC_RESULT_FIXED;
+		dev->eccFixed++;
+		break;
+
+	case -EBADMSG:
+		/* MTD's ECC could not fix the data */
+		dev->eccUnfixed++;
+		/* fall into... */
+	default:
+		rettags(etags, YAFFS_ECC_RESULT_UNFIXED, 0);
+		etags->blockBad = (mtd->block_isbad)(mtd, addr);
+		return YAFFS_FAIL;
+	}
+
+	/* Check for a blank/erased chunk.
+	 */
+	if (yaffs_CheckFF((__u8 *)&pt1, 8)) {
+		/* when blank, upper layers want eccResult to be <= NO_ERROR */
+		return rettags(etags, YAFFS_ECC_RESULT_NO_ERROR, YAFFS_OK);
+	}
+
+#ifndef CONFIG_YAFFS_9BYTE_TAGS
+	/* Read deleted status (bit) then return it to it's non-deleted
+	 * state before performing tags mini-ECC check. pt1.deleted is
+	 * inverted.
+	 */
+	deleted = !pt1.deleted;
+	pt1.deleted = 1;
+#else
+	deleted = (yaffs_CountBits(((__u8 *)&pt1)[8]) < 7);
+#endif
+
+	/* Check the packed tags mini-ECC and correct if necessary/possible.
+	 */
+	retval = yaffs_CheckECCOnTags((yaffs_Tags *)&pt1);
+	switch (retval) {
+	case 0:
+		/* no tags error, use MTD result */
+		break;
+	case 1:
+		/* recovered tags-ECC error */
+		dev->tagsEccFixed++;
+		if (eccres == YAFFS_ECC_RESULT_NO_ERROR)
+			eccres = YAFFS_ECC_RESULT_FIXED;
+		break;
+	default:
+		/* unrecovered tags-ECC error */
+		dev->tagsEccUnfixed++;
+		return rettags(etags, YAFFS_ECC_RESULT_UNFIXED, YAFFS_FAIL);
+	}
+
+	/* Unpack the tags to extended form and set ECC result.
+	 * [set shouldBeFF just to keep yaffs_UnpackTags1 happy]
+	 */
+	pt1.shouldBeFF = 0xFFFFFFFF;
+	yaffs_UnpackTags1(etags, &pt1);
+	etags->eccResult = eccres;
+
+	/* Set deleted state */
+	etags->chunkDeleted = deleted;
+	return YAFFS_OK;
+}
+
+/* Mark a block bad.
+ *
+ * This is a persistant state.
+ * Use of this function should be rare.
+ *
+ * Returns YAFFS_OK or YAFFS_FAIL.
+ */
+int nandmtd1_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo)
+{
+	struct mtd_info * mtd = dev->genericDevice;
+	int blocksize = dev->nChunksPerBlock * dev->nDataBytesPerChunk;
+	int retval;
+
+	yaffs_trace(YAFFS_TRACE_BAD_BLOCKS, "marking block %d bad", blockNo);
+
+	retval = mtd->block_markbad(mtd, (loff_t)blocksize * blockNo);
+	return (retval) ? YAFFS_FAIL : YAFFS_OK;
+}
+
+/* Check any MTD prerequists.
+ *
+ * Returns YAFFS_OK or YAFFS_FAIL.
+ */
+static int nandmtd1_TestPrerequists(struct mtd_info * mtd)
+{
+	/* 2.6.18 has mtd->ecclayout->oobavail */
+	/* 2.6.21 has mtd->ecclayout->oobavail and mtd->oobavail */
+	int oobavail = mtd->ecclayout->oobavail;
+
+	if (oobavail < YTAG1_SIZE) {
+		yaffs_trace(YAFFS_TRACE_ERROR,
+			"mtd device has only %d bytes for tags, need %d\n",
+			oobavail, YTAG1_SIZE);
+		return YAFFS_FAIL;
+	}
+	return YAFFS_OK;
+}
+
+/* Query for the current state of a specific block.
+ *
+ * Examine the tags of the first chunk of the block and return the state:
+ *  - YAFFS_BLOCK_STATE_DEAD, the block is marked bad
+ *  - YAFFS_BLOCK_STATE_NEEDS_SCANNING, the block is in use
+ *  - YAFFS_BLOCK_STATE_EMPTY, the block is clean
+ *
+ * Always returns YAFFS_OK.
+ */
+int nandmtd1_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+	yaffs_BlockState * pState, int *pSequenceNumber)
+{
+	struct mtd_info * mtd = dev->genericDevice;
+	int chunkNo = blockNo * dev->nChunksPerBlock;
+	yaffs_ExtendedTags etags;
+	int state = YAFFS_BLOCK_STATE_DEAD;
+	int seqnum = 0;
+	int retval;
+
+	/* We don't yet have a good place to test for MTD config prerequists.
+	 * Do it here as we are called during the initial scan.
+	 */
+	if (nandmtd1_TestPrerequists(mtd) != YAFFS_OK) {
+		return YAFFS_FAIL;
+	}
+
+	retval = nandmtd1_ReadChunkWithTagsFromNAND(dev, chunkNo, NULL, &etags);
+	if (etags.blockBad) {
+		yaffs_trace(YAFFS_TRACE_BAD_BLOCKS,
+			"block %d is marked bad", blockNo);
+		state = YAFFS_BLOCK_STATE_DEAD;
+	}
+	else if (etags.chunkUsed) {
+		state = YAFFS_BLOCK_STATE_NEEDS_SCANNING;
+		seqnum = etags.sequenceNumber;
+	}
+	else {
+		state = YAFFS_BLOCK_STATE_EMPTY;
+	}
+
+	*pState = state;
+	*pSequenceNumber = seqnum;
+
+	/* query always succeeds */
+	return YAFFS_OK;
+}
+
+#endif /*KERNEL_VERSION*/
diff --git a/target/linux/generic/files/fs/yaffs2/yaffs_mtdif1.h b/target/linux/generic/files/fs/yaffs2/yaffs_mtdif1.h
new file mode 100644
index 0000000000..c4f6197d68
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/yaffs_mtdif1.h
@@ -0,0 +1,28 @@
+/*
+ * YAFFS: Yet another Flash File System. A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ *   for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+#ifndef __YAFFS_MTDIF1_H__
+#define __YAFFS_MTDIF1_H__
+
+int nandmtd1_WriteChunkWithTagsToNAND(yaffs_Device * dev, int chunkInNAND,
+	const __u8 * data, const yaffs_ExtendedTags * tags);
+
+int nandmtd1_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+	__u8 * data, yaffs_ExtendedTags * tags);
+
+int nandmtd1_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo);
+
+int nandmtd1_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+	yaffs_BlockState * state, int *sequenceNumber);
+
+#endif
diff --git a/target/linux/generic/files/fs/yaffs2/yaffs_mtdif2.c b/target/linux/generic/files/fs/yaffs2/yaffs_mtdif2.c
new file mode 100644
index 0000000000..cdad0734bf
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/yaffs_mtdif2.c
@@ -0,0 +1,232 @@
+/*
+ * YAFFS: Yet Another Flash File System. A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ *   for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* mtd interface for YAFFS2 */
+
+const char *yaffs_mtdif2_c_version =
+    "$Id: yaffs_mtdif2.c,v 1.17 2007-02-14 01:09:06 wookey Exp $";
+
+#include "yportenv.h"
+
+
+#include "yaffs_mtdif2.h"
+
+#include "linux/mtd/mtd.h"
+#include "linux/types.h"
+#include "linux/time.h"
+
+#include "yaffs_packedtags2.h"
+
+int nandmtd2_WriteChunkWithTagsToNAND(yaffs_Device * dev, int chunkInNAND,
+				      const __u8 * data,
+				      const yaffs_ExtendedTags * tags)
+{
+	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+	struct mtd_oob_ops ops;
+#else
+	size_t dummy;
+#endif
+	int retval = 0;
+
+	loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
+
+	yaffs_PackedTags2 pt;
+
+	T(YAFFS_TRACE_MTD,
+	  (TSTR
+	   ("nandmtd2_WriteChunkWithTagsToNAND chunk %d data %p tags %p"
+	    TENDSTR), chunkInNAND, data, tags));
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+	if (tags)
+		yaffs_PackTags2(&pt, tags);
+	else
+		BUG(); /* both tags and data should always be present */
+
+	if (data) {
+		ops.mode = MTD_OOB_AUTO;
+		ops.ooblen = sizeof(pt);
+		ops.len = dev->nDataBytesPerChunk;
+		ops.ooboffs = 0;
+		ops.datbuf = (__u8 *)data;
+		ops.oobbuf = (void *)&pt;
+		retval = mtd->write_oob(mtd, addr, &ops);
+	} else
+		BUG(); /* both tags and data should always be present */
+#else
+	if (tags) {
+		yaffs_PackTags2(&pt, tags);
+	}
+
+	if (data && tags) {
+		if (dev->useNANDECC)
+			retval =
+			    mtd->write_ecc(mtd, addr, dev->nDataBytesPerChunk,
+					   &dummy, data, (__u8 *) & pt, NULL);
+		else
+			retval =
+			    mtd->write_ecc(mtd, addr, dev->nDataBytesPerChunk,
+					   &dummy, data, (__u8 *) & pt, NULL);
+	} else {
+		if (data)
+			retval =
+			    mtd->write(mtd, addr, dev->nDataBytesPerChunk, &dummy,
+				       data);
+		if (tags)
+			retval =
+			    mtd->write_oob(mtd, addr, mtd->oobsize, &dummy,
+					   (__u8 *) & pt);
+
+	}
+#endif
+
+	if (retval == 0)
+		return YAFFS_OK;
+	else
+		return YAFFS_FAIL;
+}
+
+int nandmtd2_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+				       __u8 * data, yaffs_ExtendedTags * tags)
+{
+	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+	struct mtd_oob_ops ops;
+#endif
+	size_t dummy;
+	int retval = 0;
+
+	loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
+
+	yaffs_PackedTags2 pt;
+
+	T(YAFFS_TRACE_MTD,
+	  (TSTR
+	   ("nandmtd2_ReadChunkWithTagsFromNAND chunk %d data %p tags %p"
+	    TENDSTR), chunkInNAND, data, tags));
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+	if (data && !tags)
+		retval = mtd->read(mtd, addr, dev->nDataBytesPerChunk,
+				&dummy, data);
+	else if (tags) {
+		ops.mode = MTD_OOB_AUTO;
+		ops.ooblen = sizeof(pt);
+		ops.len = data ? dev->nDataBytesPerChunk : sizeof(pt);
+		ops.ooboffs = 0;
+		ops.datbuf = data;
+		ops.oobbuf = dev->spareBuffer;
+		retval = mtd->read_oob(mtd, addr, &ops);
+	}
+#else
+	if (data && tags) {
+		if (dev->useNANDECC) {
+			retval =
+			    mtd->read_ecc(mtd, addr, dev->nDataBytesPerChunk,
+					  &dummy, data, dev->spareBuffer,
+					  NULL);
+		} else {
+			retval =
+			    mtd->read_ecc(mtd, addr, dev->nDataBytesPerChunk,
+					  &dummy, data, dev->spareBuffer,
+					  NULL);
+		}
+	} else {
+		if (data)
+			retval =
+			    mtd->read(mtd, addr, dev->nDataBytesPerChunk, &dummy,
+				      data);
+		if (tags)
+			retval =
+			    mtd->read_oob(mtd, addr, mtd->oobsize, &dummy,
+					  dev->spareBuffer);
+	}
+#endif
+
+	memcpy(&pt, dev->spareBuffer, sizeof(pt));
+
+	if (tags)
+		yaffs_UnpackTags2(tags, &pt);
+
+	if(tags && retval == -EBADMSG && tags->eccResult == YAFFS_ECC_RESULT_NO_ERROR)
+		tags->eccResult = YAFFS_ECC_RESULT_UNFIXED;
+
+	if (retval == 0)
+		return YAFFS_OK;
+	else
+		return YAFFS_FAIL;
+}
+
+int nandmtd2_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo)
+{
+	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+	int retval;
+	T(YAFFS_TRACE_MTD,
+	  (TSTR("nandmtd2_MarkNANDBlockBad %d" TENDSTR), blockNo));
+
+	retval =
+	    mtd->block_markbad(mtd,
+			       blockNo * dev->nChunksPerBlock *
+			       dev->nDataBytesPerChunk);
+
+	if (retval == 0)
+		return YAFFS_OK;
+	else
+		return YAFFS_FAIL;
+
+}
+
+int nandmtd2_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+			    yaffs_BlockState * state, int *sequenceNumber)
+{
+	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+	int retval;
+
+	T(YAFFS_TRACE_MTD,
+	  (TSTR("nandmtd2_QueryNANDBlock %d" TENDSTR), blockNo));
+	retval =
+	    mtd->block_isbad(mtd,
+			     blockNo * dev->nChunksPerBlock *
+			     dev->nDataBytesPerChunk);
+
+	if (retval) {
+		T(YAFFS_TRACE_MTD, (TSTR("block is bad" TENDSTR)));
+
+		*state = YAFFS_BLOCK_STATE_DEAD;
+		*sequenceNumber = 0;
+	} else {
+		yaffs_ExtendedTags t;
+		nandmtd2_ReadChunkWithTagsFromNAND(dev,
+						   blockNo *
+						   dev->nChunksPerBlock, NULL,
+						   &t);
+
+		if (t.chunkUsed) {
+			*sequenceNumber = t.sequenceNumber;
+			*state = YAFFS_BLOCK_STATE_NEEDS_SCANNING;
+		} else {
+			*sequenceNumber = 0;
+			*state = YAFFS_BLOCK_STATE_EMPTY;
+		}
+	}
+	T(YAFFS_TRACE_MTD,
+	  (TSTR("block is bad seq %d state %d" TENDSTR), *sequenceNumber,
+	   *state));
+
+	if (retval == 0)
+		return YAFFS_OK;
+	else
+		return YAFFS_FAIL;
+}
+
diff --git a/target/linux/generic/files/fs/yaffs2/yaffs_mtdif2.h b/target/linux/generic/files/fs/yaffs2/yaffs_mtdif2.h
new file mode 100644
index 0000000000..b67ba52aa4
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/yaffs_mtdif2.h
@@ -0,0 +1,29 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ *   for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+#ifndef __YAFFS_MTDIF2_H__
+#define __YAFFS_MTDIF2_H__
+
+#include "yaffs_guts.h"
+int nandmtd2_WriteChunkWithTagsToNAND(yaffs_Device * dev, int chunkInNAND,
+				      const __u8 * data,
+				      const yaffs_ExtendedTags * tags);
+int nandmtd2_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+				       __u8 * data, yaffs_ExtendedTags * tags);
+int nandmtd2_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo);
+int nandmtd2_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+			    yaffs_BlockState * state, int *sequenceNumber);
+
+#endif
diff --git a/target/linux/generic/files/fs/yaffs2/yaffs_nand.c b/target/linux/generic/files/fs/yaffs2/yaffs_nand.c
new file mode 100644
index 0000000000..4e250338d7
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/yaffs_nand.c
@@ -0,0 +1,134 @@
+/*
+ * YAFFS: Yet Another Flash File System. A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ *   for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+const char *yaffs_nand_c_version =
+    "$Id: yaffs_nand.c,v 1.7 2007-02-14 01:09:06 wookey Exp $";
+
+#include "yaffs_nand.h"
+#include "yaffs_tagscompat.h"
+#include "yaffs_tagsvalidity.h"
+
+
+int yaffs_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+					   __u8 * buffer,
+					   yaffs_ExtendedTags * tags)
+{
+	int result;
+	yaffs_ExtendedTags localTags;
+
+	int realignedChunkInNAND = chunkInNAND - dev->chunkOffset;
+
+	/* If there are no tags provided, use local tags to get prioritised gc working */
+	if(!tags)
+		tags = &localTags;
+
+	if (dev->readChunkWithTagsFromNAND)
+		result = dev->readChunkWithTagsFromNAND(dev, realignedChunkInNAND, buffer,
+						      tags);
+	else
+		result = yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(dev,
+									realignedChunkInNAND,
+									buffer,
+									tags);
+	if(tags &&
+	   tags->eccResult > YAFFS_ECC_RESULT_NO_ERROR){
+
+		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, chunkInNAND/dev->nChunksPerBlock);
+                yaffs_HandleChunkError(dev,bi);
+	}
+
+	return result;
+}
+
+int yaffs_WriteChunkWithTagsToNAND(yaffs_Device * dev,
+						   int chunkInNAND,
+						   const __u8 * buffer,
+						   yaffs_ExtendedTags * tags)
+{
+	chunkInNAND -= dev->chunkOffset;
+
+
+	if (tags) {
+		tags->sequenceNumber = dev->sequenceNumber;
+		tags->chunkUsed = 1;
+		if (!yaffs_ValidateTags(tags)) {
+			T(YAFFS_TRACE_ERROR,
+			  (TSTR("Writing uninitialised tags" TENDSTR)));
+			YBUG();
+		}
+		T(YAFFS_TRACE_WRITE,
+		  (TSTR("Writing chunk %d tags %d %d" TENDSTR), chunkInNAND,
+		   tags->objectId, tags->chunkId));
+	} else {
+		T(YAFFS_TRACE_ERROR, (TSTR("Writing with no tags" TENDSTR)));
+		YBUG();
+	}
+
+	if (dev->writeChunkWithTagsToNAND)
+		return dev->writeChunkWithTagsToNAND(dev, chunkInNAND, buffer,
+						     tags);
+	else
+		return yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(dev,
+								       chunkInNAND,
+								       buffer,
+								       tags);
+}
+
+int yaffs_MarkBlockBad(yaffs_Device * dev, int blockNo)
+{
+	blockNo -= dev->blockOffset;
+
+;
+	if (dev->markNANDBlockBad)
+		return dev->markNANDBlockBad(dev, blockNo);
+	else
+		return yaffs_TagsCompatabilityMarkNANDBlockBad(dev, blockNo);
+}
+
+int yaffs_QueryInitialBlockState(yaffs_Device * dev,
+						 int blockNo,
+						 yaffs_BlockState * state,
+						 unsigned *sequenceNumber)
+{
+	blockNo -= dev->blockOffset;
+
+	if (dev->queryNANDBlock)
+		return dev->queryNANDBlock(dev, blockNo, state, sequenceNumber);
+	else
+		return yaffs_TagsCompatabilityQueryNANDBlock(dev, blockNo,
+							     state,
+							     sequenceNumber);
+}
+
+
+int yaffs_EraseBlockInNAND(struct yaffs_DeviceStruct *dev,
+				  int blockInNAND)
+{
+	int result;
+
+	blockInNAND -= dev->blockOffset;
+
+
+	dev->nBlockErasures++;
+	result = dev->eraseBlockInNAND(dev, blockInNAND);
+
+	return result;
+}
+
+int yaffs_InitialiseNAND(struct yaffs_DeviceStruct *dev)
+{
+	return dev->initialiseNAND(dev);
+}
+
+
+
diff --git a/target/linux/generic/files/fs/yaffs2/yaffs_nand.h b/target/linux/generic/files/fs/yaffs2/yaffs_nand.h
new file mode 100644
index 0000000000..5fa334bdc9
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/yaffs_nand.h
@@ -0,0 +1,44 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ *   for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+#ifndef __YAFFS_NAND_H__
+#define __YAFFS_NAND_H__
+#include "yaffs_guts.h"
+
+
+
+int yaffs_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+					   __u8 * buffer,
+					   yaffs_ExtendedTags * tags);
+
+int yaffs_WriteChunkWithTagsToNAND(yaffs_Device * dev,
+						   int chunkInNAND,
+						   const __u8 * buffer,
+						   yaffs_ExtendedTags * tags);
+
+int yaffs_MarkBlockBad(yaffs_Device * dev, int blockNo);
+
+int yaffs_QueryInitialBlockState(yaffs_Device * dev,
+						 int blockNo,
+						 yaffs_BlockState * state,
+						 unsigned *sequenceNumber);
+
+int yaffs_EraseBlockInNAND(struct yaffs_DeviceStruct *dev,
+				  int blockInNAND);
+
+int yaffs_InitialiseNAND(struct yaffs_DeviceStruct *dev);
+
+#endif
+
diff --git a/target/linux/generic/files/fs/yaffs2/yaffs_nandemul2k.h b/target/linux/generic/files/fs/yaffs2/yaffs_nandemul2k.h
new file mode 100644
index 0000000000..cd2e96f7ae
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/yaffs_nandemul2k.h
@@ -0,0 +1,39 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ *   for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+/* Interface to emulated NAND functions (2k page size) */
+
+#ifndef __YAFFS_NANDEMUL2K_H__
+#define __YAFFS_NANDEMUL2K_H__
+
+#include "yaffs_guts.h"
+
+int nandemul2k_WriteChunkWithTagsToNAND(struct yaffs_DeviceStruct *dev,
+					int chunkInNAND, const __u8 * data,
+					yaffs_ExtendedTags * tags);
+int nandemul2k_ReadChunkWithTagsFromNAND(struct yaffs_DeviceStruct *dev,
+					 int chunkInNAND, __u8 * data,
+					 yaffs_ExtendedTags * tags);
+int nandemul2k_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo);
+int nandemul2k_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+			      yaffs_BlockState * state, int *sequenceNumber);
+int nandemul2k_EraseBlockInNAND(struct yaffs_DeviceStruct *dev,
+				int blockInNAND);
+int nandemul2k_InitialiseNAND(struct yaffs_DeviceStruct *dev);
+int nandemul2k_GetBytesPerChunk(void);
+int nandemul2k_GetChunksPerBlock(void);
+int nandemul2k_GetNumberOfBlocks(void);
+
+#endif
diff --git a/target/linux/generic/files/fs/yaffs2/yaffs_packedtags1.c b/target/linux/generic/files/fs/yaffs2/yaffs_packedtags1.c
new file mode 100644
index 0000000000..f480bf1df1
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/yaffs_packedtags1.c
@@ -0,0 +1,52 @@
+/*
+ * YAFFS: Yet Another Flash File System. A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ *   for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "yaffs_packedtags1.h"
+#include "yportenv.h"
+
+void yaffs_PackTags1(yaffs_PackedTags1 * pt, const yaffs_ExtendedTags * t)
+{
+	pt->chunkId = t->chunkId;
+	pt->serialNumber = t->serialNumber;
+	pt->byteCount = t->byteCount;
+	pt->objectId = t->objectId;
+	pt->ecc = 0;
+	pt->deleted = (t->chunkDeleted) ? 0 : 1;
+	pt->unusedStuff = 0;
+	pt->shouldBeFF = 0xFFFFFFFF;
+
+}
+
+void yaffs_UnpackTags1(yaffs_ExtendedTags * t, const yaffs_PackedTags1 * pt)
+{
+	static const __u8 allFF[] =
+	    { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+0xff };
+
+	if (memcmp(allFF, pt, sizeof(yaffs_PackedTags1))) {
+		t->blockBad = 0;
+		if (pt->shouldBeFF != 0xFFFFFFFF) {
+			t->blockBad = 1;
+		}
+		t->chunkUsed = 1;
+		t->objectId = pt->objectId;
+		t->chunkId = pt->chunkId;
+		t->byteCount = pt->byteCount;
+		t->eccResult = YAFFS_ECC_RESULT_NO_ERROR;
+		t->chunkDeleted = (pt->deleted) ? 0 : 1;
+		t->serialNumber = pt->serialNumber;
+	} else {
+		memset(t, 0, sizeof(yaffs_ExtendedTags));
+
+	}
+}
diff --git a/target/linux/generic/files/fs/yaffs2/yaffs_packedtags1.h b/target/linux/generic/files/fs/yaffs2/yaffs_packedtags1.h
new file mode 100644
index 0000000000..776c5c256c
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/yaffs_packedtags1.h
@@ -0,0 +1,37 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ *   for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+/* This is used to pack YAFFS1 tags, not YAFFS2 tags. */
+
+#ifndef __YAFFS_PACKEDTAGS1_H__
+#define __YAFFS_PACKEDTAGS1_H__
+
+#include "yaffs_guts.h"
+
+typedef struct {
+	unsigned chunkId:20;
+	unsigned serialNumber:2;
+	unsigned byteCount:10;
+	unsigned objectId:18;
+	unsigned ecc:12;
+	unsigned deleted:1;
+	unsigned unusedStuff:1;
+	unsigned shouldBeFF;
+
+} yaffs_PackedTags1;
+
+void yaffs_PackTags1(yaffs_PackedTags1 * pt, const yaffs_ExtendedTags * t);
+void yaffs_UnpackTags1(yaffs_ExtendedTags * t, const yaffs_PackedTags1 * pt);
+#endif
diff --git a/target/linux/generic/files/fs/yaffs2/yaffs_packedtags2.c b/target/linux/generic/files/fs/yaffs2/yaffs_packedtags2.c
new file mode 100644
index 0000000000..e420f95da1
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/yaffs_packedtags2.c
@@ -0,0 +1,182 @@
+/*
+ * YAFFS: Yet Another Flash File System. A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ *   for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "yaffs_packedtags2.h"
+#include "yportenv.h"
+#include "yaffs_tagsvalidity.h"
+
+/* This code packs a set of extended tags into a binary structure for
+ * NAND storage
+ */
+
+/* Some of the information is "extra" struff which can be packed in to
+ * speed scanning
+ * This is defined by having the EXTRA_HEADER_INFO_FLAG set.
+ */
+
+/* Extra flags applied to chunkId */
+
+#define EXTRA_HEADER_INFO_FLAG	0x80000000
+#define EXTRA_SHRINK_FLAG	0x40000000
+#define EXTRA_SHADOWS_FLAG	0x20000000
+#define EXTRA_SPARE_FLAGS	0x10000000
+
+#define ALL_EXTRA_FLAGS		0xF0000000
+
+/* Also, the top 4 bits of the object Id are set to the object type. */
+#define EXTRA_OBJECT_TYPE_SHIFT (28)
+#define EXTRA_OBJECT_TYPE_MASK  ((0x0F) << EXTRA_OBJECT_TYPE_SHIFT)
+
+static void yaffs_DumpPackedTags2(const yaffs_PackedTags2 * pt)
+{
+	T(YAFFS_TRACE_MTD,
+	  (TSTR("packed tags obj %d chunk %d byte %d seq %d" TENDSTR),
+	   pt->t.objectId, pt->t.chunkId, pt->t.byteCount,
+	   pt->t.sequenceNumber));
+}
+
+static void yaffs_DumpTags2(const yaffs_ExtendedTags * t)
+{
+	T(YAFFS_TRACE_MTD,
+	  (TSTR
+	   ("ext.tags eccres %d blkbad %d chused %d obj %d chunk%d byte "
+	    "%d del %d ser %d seq %d"
+	    TENDSTR), t->eccResult, t->blockBad, t->chunkUsed, t->objectId,
+	   t->chunkId, t->byteCount, t->chunkDeleted, t->serialNumber,
+	   t->sequenceNumber));
+
+}
+
+void yaffs_PackTags2(yaffs_PackedTags2 * pt, const yaffs_ExtendedTags * t)
+{
+	pt->t.chunkId = t->chunkId;
+	pt->t.sequenceNumber = t->sequenceNumber;
+	pt->t.byteCount = t->byteCount;
+	pt->t.objectId = t->objectId;
+
+	if (t->chunkId == 0 && t->extraHeaderInfoAvailable) {
+		/* Store the extra header info instead */
+		/* We save the parent object in the chunkId */
+		pt->t.chunkId = EXTRA_HEADER_INFO_FLAG
+			| t->extraParentObjectId;
+		if (t->extraIsShrinkHeader) {
+			pt->t.chunkId |= EXTRA_SHRINK_FLAG;
+		}
+		if (t->extraShadows) {
+			pt->t.chunkId |= EXTRA_SHADOWS_FLAG;
+		}
+
+		pt->t.objectId &= ~EXTRA_OBJECT_TYPE_MASK;
+		pt->t.objectId |=
+		    (t->extraObjectType << EXTRA_OBJECT_TYPE_SHIFT);
+
+		if (t->extraObjectType == YAFFS_OBJECT_TYPE_HARDLINK) {
+			pt->t.byteCount = t->extraEquivalentObjectId;
+		} else if (t->extraObjectType == YAFFS_OBJECT_TYPE_FILE) {
+			pt->t.byteCount = t->extraFileLength;
+		} else {
+			pt->t.byteCount = 0;
+		}
+	}
+
+	yaffs_DumpPackedTags2(pt);
+	yaffs_DumpTags2(t);
+
+#ifndef YAFFS_IGNORE_TAGS_ECC
+	{
+		yaffs_ECCCalculateOther((unsigned char *)&pt->t,
+					sizeof(yaffs_PackedTags2TagsPart),
+					&pt->ecc);
+	}
+#endif
+}
+
+void yaffs_UnpackTags2(yaffs_ExtendedTags * t, yaffs_PackedTags2 * pt)
+{
+
+	memset(t, 0, sizeof(yaffs_ExtendedTags));
+
+	yaffs_InitialiseTags(t);
+
+	if (pt->t.sequenceNumber != 0xFFFFFFFF) {
+		/* Page is in use */
+#ifdef YAFFS_IGNORE_TAGS_ECC
+		{
+			t->eccResult = YAFFS_ECC_RESULT_NO_ERROR;
+		}
+#else
+		{
+			yaffs_ECCOther ecc;
+			int result;
+			yaffs_ECCCalculateOther((unsigned char *)&pt->t,
+						sizeof
+						(yaffs_PackedTags2TagsPart),
+						&ecc);
+			result =
+			    yaffs_ECCCorrectOther((unsigned char *)&pt->t,
+						  sizeof
+						  (yaffs_PackedTags2TagsPart),
+						  &pt->ecc, &ecc);
+			switch(result){
+				case 0:
+					t->eccResult = YAFFS_ECC_RESULT_NO_ERROR;
+					break;
+				case 1:
+					t->eccResult = YAFFS_ECC_RESULT_FIXED;
+					break;
+				case -1:
+					t->eccResult = YAFFS_ECC_RESULT_UNFIXED;
+					break;
+				default:
+					t->eccResult = YAFFS_ECC_RESULT_UNKNOWN;
+			}
+		}
+#endif
+		t->blockBad = 0;
+		t->chunkUsed = 1;
+		t->objectId = pt->t.objectId;
+		t->chunkId = pt->t.chunkId;
+		t->byteCount = pt->t.byteCount;
+		t->chunkDeleted = 0;
+		t->serialNumber = 0;
+		t->sequenceNumber = pt->t.sequenceNumber;
+
+		/* Do extra header info stuff */
+
+		if (pt->t.chunkId & EXTRA_HEADER_INFO_FLAG) {
+			t->chunkId = 0;
+			t->byteCount = 0;
+
+			t->extraHeaderInfoAvailable = 1;
+			t->extraParentObjectId =
+			    pt->t.chunkId & (~(ALL_EXTRA_FLAGS));
+			t->extraIsShrinkHeader =
+			    (pt->t.chunkId & EXTRA_SHRINK_FLAG) ? 1 : 0;
+			t->extraShadows =
+			    (pt->t.chunkId & EXTRA_SHADOWS_FLAG) ? 1 : 0;
+			t->extraObjectType =
+			    pt->t.objectId >> EXTRA_OBJECT_TYPE_SHIFT;
+			t->objectId &= ~EXTRA_OBJECT_TYPE_MASK;
+
+			if (t->extraObjectType == YAFFS_OBJECT_TYPE_HARDLINK) {
+				t->extraEquivalentObjectId = pt->t.byteCount;
+			} else {
+				t->extraFileLength = pt->t.byteCount;
+			}
+		}
+	}
+
+	yaffs_DumpPackedTags2(pt);
+	yaffs_DumpTags2(t);
+
+}
diff --git a/target/linux/generic/files/fs/yaffs2/yaffs_packedtags2.h b/target/linux/generic/files/fs/yaffs2/yaffs_packedtags2.h
new file mode 100644
index 0000000000..c2242ffe76
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/yaffs_packedtags2.h
@@ -0,0 +1,38 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ *   for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+/* This is used to pack YAFFS2 tags, not YAFFS1tags. */
+
+#ifndef __YAFFS_PACKEDTAGS2_H__
+#define __YAFFS_PACKEDTAGS2_H__
+
+#include "yaffs_guts.h"
+#include "yaffs_ecc.h"
+
+typedef struct {
+	unsigned sequenceNumber;
+	unsigned objectId;
+	unsigned chunkId;
+	unsigned byteCount;
+} yaffs_PackedTags2TagsPart;
+
+typedef struct {
+	yaffs_PackedTags2TagsPart t;
+	yaffs_ECCOther ecc;
+} yaffs_PackedTags2;
+
+void yaffs_PackTags2(yaffs_PackedTags2 * pt, const yaffs_ExtendedTags * t);
+void yaffs_UnpackTags2(yaffs_ExtendedTags * t, yaffs_PackedTags2 * pt);
+#endif
diff --git a/target/linux/generic/files/fs/yaffs2/yaffs_qsort.c b/target/linux/generic/files/fs/yaffs2/yaffs_qsort.c
new file mode 100644
index 0000000000..474be9cea3
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/yaffs_qsort.c
@@ -0,0 +1,160 @@
+/*
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include "yportenv.h"
+//#include <linux/string.h>
+
+/*
+ * Qsort routine from Bentley & McIlroy's "Engineering a Sort Function".
+ */
+#define swapcode(TYPE, parmi, parmj, n) { 		\
+	long i = (n) / sizeof (TYPE); 			\
+	register TYPE *pi = (TYPE *) (parmi); 		\
+	register TYPE *pj = (TYPE *) (parmj); 		\
+	do { 						\
+		register TYPE	t = *pi;		\
+		*pi++ = *pj;				\
+		*pj++ = t;				\
+        } while (--i > 0);				\
+}
+
+#define SWAPINIT(a, es) swaptype = ((char *)a - (char *)0) % sizeof(long) || \
+	es % sizeof(long) ? 2 : es == sizeof(long)? 0 : 1;
+
+static __inline void
+swapfunc(char *a, char *b, int n, int swaptype)
+{
+	if (swaptype <= 1)
+		swapcode(long, a, b, n)
+	else
+		swapcode(char, a, b, n)
+}
+
+#define swap(a, b)					\
+	if (swaptype == 0) {				\
+		long t = *(long *)(a);			\
+		*(long *)(a) = *(long *)(b);		\
+		*(long *)(b) = t;			\
+	} else						\
+		swapfunc(a, b, es, swaptype)
+
+#define vecswap(a, b, n) 	if ((n) > 0) swapfunc(a, b, n, swaptype)
+
+static __inline char *
+med3(char *a, char *b, char *c, int (*cmp)(const void *, const void *))
+{
+	return cmp(a, b) < 0 ?
+	       (cmp(b, c) < 0 ? b : (cmp(a, c) < 0 ? c : a ))
+              :(cmp(b, c) > 0 ? b : (cmp(a, c) < 0 ? a : c ));
+}
+
+#ifndef min
+#define min(a,b) (((a) < (b)) ? (a) : (b))
+#endif
+
+void
+yaffs_qsort(void *aa, size_t n, size_t es,
+	int (*cmp)(const void *, const void *))
+{
+	char *pa, *pb, *pc, *pd, *pl, *pm, *pn;
+	int d, r, swaptype, swap_cnt;
+	register char *a = aa;
+
+loop:	SWAPINIT(a, es);
+	swap_cnt = 0;
+	if (n < 7) {
+		for (pm = (char *)a + es; pm < (char *) a + n * es; pm += es)
+			for (pl = pm; pl > (char *) a && cmp(pl - es, pl) > 0;
+			     pl -= es)
+				swap(pl, pl - es);
+		return;
+	}
+	pm = (char *)a + (n / 2) * es;
+	if (n > 7) {
+		pl = (char *)a;
+		pn = (char *)a + (n - 1) * es;
+		if (n > 40) {
+			d = (n / 8) * es;
+			pl = med3(pl, pl + d, pl + 2 * d, cmp);
+			pm = med3(pm - d, pm, pm + d, cmp);
+			pn = med3(pn - 2 * d, pn - d, pn, cmp);
+		}
+		pm = med3(pl, pm, pn, cmp);
+	}
+	swap(a, pm);
+	pa = pb = (char *)a + es;
+
+	pc = pd = (char *)a + (n - 1) * es;
+	for (;;) {
+		while (pb <= pc && (r = cmp(pb, a)) <= 0) {
+			if (r == 0) {
+				swap_cnt = 1;
+				swap(pa, pb);
+				pa += es;
+			}
+			pb += es;
+		}
+		while (pb <= pc && (r = cmp(pc, a)) >= 0) {
+			if (r == 0) {
+				swap_cnt = 1;
+				swap(pc, pd);
+				pd -= es;
+			}
+			pc -= es;
+		}
+		if (pb > pc)
+			break;
+		swap(pb, pc);
+		swap_cnt = 1;
+		pb += es;
+		pc -= es;
+	}
+	if (swap_cnt == 0) {  /* Switch to insertion sort */
+		for (pm = (char *) a + es; pm < (char *) a + n * es; pm += es)
+			for (pl = pm; pl > (char *) a && cmp(pl - es, pl) > 0;
+			     pl -= es)
+				swap(pl, pl - es);
+		return;
+	}
+
+	pn = (char *)a + n * es;
+	r = min(pa - (char *)a, pb - pa);
+	vecswap(a, pb - r, r);
+	r = min((long)(pd - pc), (long)(pn - pd - es));
+	vecswap(pb, pn - r, r);
+	if ((r = pb - pa) > es)
+		yaffs_qsort(a, r / es, es, cmp);
+	if ((r = pd - pc) > es) {
+		/* Iterate rather than recurse to save stack space */
+		a = pn - r;
+		n = r / es;
+		goto loop;
+	}
+/*		yaffs_qsort(pn - r, r / es, es, cmp);*/
+}
diff --git a/target/linux/generic/files/fs/yaffs2/yaffs_qsort.h b/target/linux/generic/files/fs/yaffs2/yaffs_qsort.h
new file mode 100644
index 0000000000..610b7ec849
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/yaffs_qsort.h
@@ -0,0 +1,23 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ *   for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+
+#ifndef __YAFFS_QSORT_H__
+#define __YAFFS_QSORT_H__
+
+extern void yaffs_qsort (void *const base, size_t total_elems, size_t size,
+                   int (*cmp)(const void *, const void *));
+
+#endif
diff --git a/target/linux/generic/files/fs/yaffs2/yaffs_tagscompat.c b/target/linux/generic/files/fs/yaffs2/yaffs_tagscompat.c
new file mode 100644
index 0000000000..7622b1af7c
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/yaffs_tagscompat.c
@@ -0,0 +1,530 @@
+/*
+ * YAFFS: Yet Another Flash File System. A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ *   for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "yaffs_guts.h"
+#include "yaffs_tagscompat.h"
+#include "yaffs_ecc.h"
+
+static void yaffs_HandleReadDataError(yaffs_Device * dev, int chunkInNAND);
+#ifdef NOTYET
+static void yaffs_CheckWrittenBlock(yaffs_Device * dev, int chunkInNAND);
+static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+				     const __u8 * data,
+				     const yaffs_Spare * spare);
+static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+				    const yaffs_Spare * spare);
+static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND);
+#endif
+
+static const char yaffs_countBitsTable[256] = {
+	0, 1, 1, 2, 1, 2, 2, 3, 1, 2, 2, 3, 2, 3, 3, 4,
+	1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
+	1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
+	2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
+	1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
+	2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
+	2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
+	3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
+	1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
+	2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
+	2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
+	3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
+	2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
+	3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
+	3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
+	4, 5, 5, 6, 5, 6, 6, 7, 5, 6, 6, 7, 6, 7, 7, 8
+};
+
+int yaffs_CountBits(__u8 x)
+{
+	int retVal;
+	retVal = yaffs_countBitsTable[x];
+	return retVal;
+}
+
+/********** Tags ECC calculations  *********/
+
+void yaffs_CalcECC(const __u8 * data, yaffs_Spare * spare)
+{
+	yaffs_ECCCalculate(data, spare->ecc1);
+	yaffs_ECCCalculate(&data[256], spare->ecc2);
+}
+
+void yaffs_CalcTagsECC(yaffs_Tags * tags)
+{
+	/* Calculate an ecc */
+
+	unsigned char *b = ((yaffs_TagsUnion *) tags)->asBytes;
+	unsigned i, j;
+	unsigned ecc = 0;
+	unsigned bit = 0;
+
+	tags->ecc = 0;
+
+	for (i = 0; i < 8; i++) {
+		for (j = 1; j & 0xff; j <<= 1) {
+			bit++;
+			if (b[i] & j) {
+				ecc ^= bit;
+			}
+		}
+	}
+
+	tags->ecc = ecc;
+
+}
+
+int yaffs_CheckECCOnTags(yaffs_Tags * tags)
+{
+	unsigned ecc = tags->ecc;
+
+	yaffs_CalcTagsECC(tags);
+
+	ecc ^= tags->ecc;
+
+	if (ecc && ecc <= 64) {
+		/* TODO: Handle the failure better. Retire? */
+		unsigned char *b = ((yaffs_TagsUnion *) tags)->asBytes;
+
+		ecc--;
+
+		b[ecc / 8] ^= (1 << (ecc & 7));
+
+		/* Now recvalc the ecc */
+		yaffs_CalcTagsECC(tags);
+
+		return 1;	/* recovered error */
+	} else if (ecc) {
+		/* Wierd ecc failure value */
+		/* TODO Need to do somethiong here */
+		return -1;	/* unrecovered error */
+	}
+
+	return 0;
+}
+
+/********** Tags **********/
+
+static void yaffs_LoadTagsIntoSpare(yaffs_Spare * sparePtr,
+				    yaffs_Tags * tagsPtr)
+{
+	yaffs_TagsUnion *tu = (yaffs_TagsUnion *) tagsPtr;
+
+	yaffs_CalcTagsECC(tagsPtr);
+
+	sparePtr->tagByte0 = tu->asBytes[0];
+	sparePtr->tagByte1 = tu->asBytes[1];
+	sparePtr->tagByte2 = tu->asBytes[2];
+	sparePtr->tagByte3 = tu->asBytes[3];
+	sparePtr->tagByte4 = tu->asBytes[4];
+	sparePtr->tagByte5 = tu->asBytes[5];
+	sparePtr->tagByte6 = tu->asBytes[6];
+	sparePtr->tagByte7 = tu->asBytes[7];
+}
+
+static void yaffs_GetTagsFromSpare(yaffs_Device * dev, yaffs_Spare * sparePtr,
+				   yaffs_Tags * tagsPtr)
+{
+	yaffs_TagsUnion *tu = (yaffs_TagsUnion *) tagsPtr;
+	int result;
+
+	tu->asBytes[0] = sparePtr->tagByte0;
+	tu->asBytes[1] = sparePtr->tagByte1;
+	tu->asBytes[2] = sparePtr->tagByte2;
+	tu->asBytes[3] = sparePtr->tagByte3;
+	tu->asBytes[4] = sparePtr->tagByte4;
+	tu->asBytes[5] = sparePtr->tagByte5;
+	tu->asBytes[6] = sparePtr->tagByte6;
+	tu->asBytes[7] = sparePtr->tagByte7;
+
+	result = yaffs_CheckECCOnTags(tagsPtr);
+	if (result > 0) {
+		dev->tagsEccFixed++;
+	} else if (result < 0) {
+		dev->tagsEccUnfixed++;
+	}
+}
+
+static void yaffs_SpareInitialise(yaffs_Spare * spare)
+{
+	memset(spare, 0xFF, sizeof(yaffs_Spare));
+}
+
+static int yaffs_WriteChunkToNAND(struct yaffs_DeviceStruct *dev,
+				  int chunkInNAND, const __u8 * data,
+				  yaffs_Spare * spare)
+{
+	if (chunkInNAND < dev->startBlock * dev->nChunksPerBlock) {
+		T(YAFFS_TRACE_ERROR,
+		  (TSTR("**>> yaffs chunk %d is not valid" TENDSTR),
+		   chunkInNAND));
+		return YAFFS_FAIL;
+	}
+
+	dev->nPageWrites++;
+	return dev->writeChunkToNAND(dev, chunkInNAND, data, spare);
+}
+
+static int yaffs_ReadChunkFromNAND(struct yaffs_DeviceStruct *dev,
+				   int chunkInNAND,
+				   __u8 * data,
+				   yaffs_Spare * spare,
+				   yaffs_ECCResult * eccResult,
+				   int doErrorCorrection)
+{
+	int retVal;
+	yaffs_Spare localSpare;
+
+	dev->nPageReads++;
+
+	if (!spare && data) {
+		/* If we don't have a real spare, then we use a local one. */
+		/* Need this for the calculation of the ecc */
+		spare = &localSpare;
+	}
+
+	if (!dev->useNANDECC) {
+		retVal = dev->readChunkFromNAND(dev, chunkInNAND, data, spare);
+		if (data && doErrorCorrection) {
+			/* Do ECC correction */
+			/* Todo handle any errors */
+			int eccResult1, eccResult2;
+			__u8 calcEcc[3];
+
+			yaffs_ECCCalculate(data, calcEcc);
+			eccResult1 =
+			    yaffs_ECCCorrect(data, spare->ecc1, calcEcc);
+			yaffs_ECCCalculate(&data[256], calcEcc);
+			eccResult2 =
+			    yaffs_ECCCorrect(&data[256], spare->ecc2, calcEcc);
+
+			if (eccResult1 > 0) {
+				T(YAFFS_TRACE_ERROR,
+				  (TSTR
+				   ("**>>yaffs ecc error fix performed on chunk %d:0"
+				    TENDSTR), chunkInNAND));
+				dev->eccFixed++;
+			} else if (eccResult1 < 0) {
+				T(YAFFS_TRACE_ERROR,
+				  (TSTR
+				   ("**>>yaffs ecc error unfixed on chunk %d:0"
+				    TENDSTR), chunkInNAND));
+				dev->eccUnfixed++;
+			}
+
+			if (eccResult2 > 0) {
+				T(YAFFS_TRACE_ERROR,
+				  (TSTR
+				   ("**>>yaffs ecc error fix performed on chunk %d:1"
+				    TENDSTR), chunkInNAND));
+				dev->eccFixed++;
+			} else if (eccResult2 < 0) {
+				T(YAFFS_TRACE_ERROR,
+				  (TSTR
+				   ("**>>yaffs ecc error unfixed on chunk %d:1"
+				    TENDSTR), chunkInNAND));
+				dev->eccUnfixed++;
+			}
+
+			if (eccResult1 || eccResult2) {
+				/* We had a data problem on this page */
+				yaffs_HandleReadDataError(dev, chunkInNAND);
+			}
+
+			if (eccResult1 < 0 || eccResult2 < 0)
+				*eccResult = YAFFS_ECC_RESULT_UNFIXED;
+			else if (eccResult1 > 0 || eccResult2 > 0)
+				*eccResult = YAFFS_ECC_RESULT_FIXED;
+			else
+				*eccResult = YAFFS_ECC_RESULT_NO_ERROR;
+		}
+	} else {
+		/* Must allocate enough memory for spare+2*sizeof(int) */
+		/* for ecc results from device. */
+		struct yaffs_NANDSpare nspare;
+		retVal =
+		    dev->readChunkFromNAND(dev, chunkInNAND, data,
+					   (yaffs_Spare *) & nspare);
+		memcpy(spare, &nspare, sizeof(yaffs_Spare));
+		if (data && doErrorCorrection) {
+			if (nspare.eccres1 > 0) {
+				T(YAFFS_TRACE_ERROR,
+				  (TSTR
+				   ("**>>mtd ecc error fix performed on chunk %d:0"
+				    TENDSTR), chunkInNAND));
+			} else if (nspare.eccres1 < 0) {
+				T(YAFFS_TRACE_ERROR,
+				  (TSTR
+				   ("**>>mtd ecc error unfixed on chunk %d:0"
+				    TENDSTR), chunkInNAND));
+			}
+
+			if (nspare.eccres2 > 0) {
+				T(YAFFS_TRACE_ERROR,
+				  (TSTR
+				   ("**>>mtd ecc error fix performed on chunk %d:1"
+				    TENDSTR), chunkInNAND));
+			} else if (nspare.eccres2 < 0) {
+				T(YAFFS_TRACE_ERROR,
+				  (TSTR
+				   ("**>>mtd ecc error unfixed on chunk %d:1"
+				    TENDSTR), chunkInNAND));
+			}
+
+			if (nspare.eccres1 || nspare.eccres2) {
+				/* We had a data problem on this page */
+				yaffs_HandleReadDataError(dev, chunkInNAND);
+			}
+
+			if (nspare.eccres1 < 0 || nspare.eccres2 < 0)
+				*eccResult = YAFFS_ECC_RESULT_UNFIXED;
+			else if (nspare.eccres1 > 0 || nspare.eccres2 > 0)
+				*eccResult = YAFFS_ECC_RESULT_FIXED;
+			else
+				*eccResult = YAFFS_ECC_RESULT_NO_ERROR;
+
+		}
+	}
+	return retVal;
+}
+
+#ifdef NOTYET
+static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev,
+				  int chunkInNAND)
+{
+
+	static int init = 0;
+	static __u8 cmpbuf[YAFFS_BYTES_PER_CHUNK];
+	static __u8 data[YAFFS_BYTES_PER_CHUNK];
+	/* Might as well always allocate the larger size for */
+	/* dev->useNANDECC == true; */
+	static __u8 spare[sizeof(struct yaffs_NANDSpare)];
+
+	dev->readChunkFromNAND(dev, chunkInNAND, data, (yaffs_Spare *) spare);
+
+	if (!init) {
+		memset(cmpbuf, 0xff, YAFFS_BYTES_PER_CHUNK);
+		init = 1;
+	}
+
+	if (memcmp(cmpbuf, data, YAFFS_BYTES_PER_CHUNK))
+		return YAFFS_FAIL;
+	if (memcmp(cmpbuf, spare, 16))
+		return YAFFS_FAIL;
+
+	return YAFFS_OK;
+
+}
+#endif
+
+/*
+ * Functions for robustisizing
+ */
+
+static void yaffs_HandleReadDataError(yaffs_Device * dev, int chunkInNAND)
+{
+	int blockInNAND = chunkInNAND / dev->nChunksPerBlock;
+
+	/* Mark the block for retirement */
+	yaffs_GetBlockInfo(dev, blockInNAND)->needsRetiring = 1;
+	T(YAFFS_TRACE_ERROR | YAFFS_TRACE_BAD_BLOCKS,
+	  (TSTR("**>>Block %d marked for retirement" TENDSTR), blockInNAND));
+
+	/* TODO:
+	 * Just do a garbage collection on the affected block
+	 * then retire the block
+	 * NB recursion
+	 */
+}
+
+#ifdef NOTYET
+static void yaffs_CheckWrittenBlock(yaffs_Device * dev, int chunkInNAND)
+{
+}
+
+static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+				     const __u8 * data,
+				     const yaffs_Spare * spare)
+{
+}
+
+static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+				    const yaffs_Spare * spare)
+{
+}
+
+static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND)
+{
+	int blockInNAND = chunkInNAND / dev->nChunksPerBlock;
+
+	/* Mark the block for retirement */
+	yaffs_GetBlockInfo(dev, blockInNAND)->needsRetiring = 1;
+	/* Delete the chunk */
+	yaffs_DeleteChunk(dev, chunkInNAND, 1, __LINE__);
+}
+
+static int yaffs_VerifyCompare(const __u8 * d0, const __u8 * d1,
+			       const yaffs_Spare * s0, const yaffs_Spare * s1)
+{
+
+	if (memcmp(d0, d1, YAFFS_BYTES_PER_CHUNK) != 0 ||
+	    s0->tagByte0 != s1->tagByte0 ||
+	    s0->tagByte1 != s1->tagByte1 ||
+	    s0->tagByte2 != s1->tagByte2 ||
+	    s0->tagByte3 != s1->tagByte3 ||
+	    s0->tagByte4 != s1->tagByte4 ||
+	    s0->tagByte5 != s1->tagByte5 ||
+	    s0->tagByte6 != s1->tagByte6 ||
+	    s0->tagByte7 != s1->tagByte7 ||
+	    s0->ecc1[0] != s1->ecc1[0] ||
+	    s0->ecc1[1] != s1->ecc1[1] ||
+	    s0->ecc1[2] != s1->ecc1[2] ||
+	    s0->ecc2[0] != s1->ecc2[0] ||
+	    s0->ecc2[1] != s1->ecc2[1] || s0->ecc2[2] != s1->ecc2[2]) {
+		return 0;
+	}
+
+	return 1;
+}
+#endif				/* NOTYET */
+
+int yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(yaffs_Device * dev,
+						    int chunkInNAND,
+						    const __u8 * data,
+						    const yaffs_ExtendedTags *
+						    eTags)
+{
+	yaffs_Spare spare;
+	yaffs_Tags tags;
+
+	yaffs_SpareInitialise(&spare);
+
+	if (eTags->chunkDeleted) {
+		spare.pageStatus = 0;
+	} else {
+		tags.objectId = eTags->objectId;
+		tags.chunkId = eTags->chunkId;
+		tags.byteCount = eTags->byteCount;
+		tags.serialNumber = eTags->serialNumber;
+
+		if (!dev->useNANDECC && data) {
+			yaffs_CalcECC(data, &spare);
+		}
+		yaffs_LoadTagsIntoSpare(&spare, &tags);
+
+	}
+
+	return yaffs_WriteChunkToNAND(dev, chunkInNAND, data, &spare);
+}
+
+int yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(yaffs_Device * dev,
+						     int chunkInNAND,
+						     __u8 * data,
+						     yaffs_ExtendedTags * eTags)
+{
+
+	yaffs_Spare spare;
+	yaffs_Tags tags;
+	yaffs_ECCResult eccResult;
+
+	static yaffs_Spare spareFF;
+	static int init;
+
+	if (!init) {
+		memset(&spareFF, 0xFF, sizeof(spareFF));
+		init = 1;
+	}
+
+	if (yaffs_ReadChunkFromNAND
+	    (dev, chunkInNAND, data, &spare, &eccResult, 1)) {
+		/* eTags may be NULL */
+		if (eTags) {
+
+			int deleted =
+			    (yaffs_CountBits(spare.pageStatus) < 7) ? 1 : 0;
+
+			eTags->chunkDeleted = deleted;
+			eTags->eccResult = eccResult;
+			eTags->blockBad = 0;	/* We're reading it */
+			/* therefore it is not a bad block */
+			eTags->chunkUsed =
+			    (memcmp(&spareFF, &spare, sizeof(spareFF)) !=
+			     0) ? 1 : 0;
+
+			if (eTags->chunkUsed) {
+				yaffs_GetTagsFromSpare(dev, &spare, &tags);
+
+				eTags->objectId = tags.objectId;
+				eTags->chunkId = tags.chunkId;
+				eTags->byteCount = tags.byteCount;
+				eTags->serialNumber = tags.serialNumber;
+			}
+		}
+
+		return YAFFS_OK;
+	} else {
+		return YAFFS_FAIL;
+	}
+}
+
+int yaffs_TagsCompatabilityMarkNANDBlockBad(struct yaffs_DeviceStruct *dev,
+					    int blockInNAND)
+{
+
+	yaffs_Spare spare;
+
+	memset(&spare, 0xff, sizeof(yaffs_Spare));
+
+	spare.blockStatus = 'Y';
+
+	yaffs_WriteChunkToNAND(dev, blockInNAND * dev->nChunksPerBlock, NULL,
+			       &spare);
+	yaffs_WriteChunkToNAND(dev, blockInNAND * dev->nChunksPerBlock + 1,
+			       NULL, &spare);
+
+	return YAFFS_OK;
+
+}
+
+int yaffs_TagsCompatabilityQueryNANDBlock(struct yaffs_DeviceStruct *dev,
+					  int blockNo, yaffs_BlockState *
+					  state,
+					  int *sequenceNumber)
+{
+
+	yaffs_Spare spare0, spare1;
+	static yaffs_Spare spareFF;
+	static int init;
+	yaffs_ECCResult dummy;
+
+	if (!init) {
+		memset(&spareFF, 0xFF, sizeof(spareFF));
+		init = 1;
+	}
+
+	*sequenceNumber = 0;
+
+	yaffs_ReadChunkFromNAND(dev, blockNo * dev->nChunksPerBlock, NULL,
+				&spare0, &dummy, 1);
+	yaffs_ReadChunkFromNAND(dev, blockNo * dev->nChunksPerBlock + 1, NULL,
+				&spare1, &dummy, 1);
+
+	if (yaffs_CountBits(spare0.blockStatus & spare1.blockStatus) < 7)
+		*state = YAFFS_BLOCK_STATE_DEAD;
+	else if (memcmp(&spareFF, &spare0, sizeof(spareFF)) == 0)
+		*state = YAFFS_BLOCK_STATE_EMPTY;
+	else
+		*state = YAFFS_BLOCK_STATE_NEEDS_SCANNING;
+
+	return YAFFS_OK;
+}
diff --git a/target/linux/generic/files/fs/yaffs2/yaffs_tagscompat.h b/target/linux/generic/files/fs/yaffs2/yaffs_tagscompat.h
new file mode 100644
index 0000000000..a61e3ba14f
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/yaffs_tagscompat.h
@@ -0,0 +1,40 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ *   for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+#ifndef __YAFFS_TAGSCOMPAT_H__
+#define __YAFFS_TAGSCOMPAT_H__
+
+#include "yaffs_guts.h"
+int yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(yaffs_Device * dev,
+						    int chunkInNAND,
+						    const __u8 * data,
+						    const yaffs_ExtendedTags *
+						    tags);
+int yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(yaffs_Device * dev,
+						     int chunkInNAND,
+						     __u8 * data,
+						     yaffs_ExtendedTags *
+						     tags);
+int yaffs_TagsCompatabilityMarkNANDBlockBad(struct yaffs_DeviceStruct *dev,
+					    int blockNo);
+int yaffs_TagsCompatabilityQueryNANDBlock(struct yaffs_DeviceStruct *dev,
+					  int blockNo, yaffs_BlockState *
+					  state, int *sequenceNumber);
+
+void yaffs_CalcTagsECC(yaffs_Tags * tags);
+int yaffs_CheckECCOnTags(yaffs_Tags * tags);
+int yaffs_CountBits(__u8 byte);
+
+#endif
diff --git a/target/linux/generic/files/fs/yaffs2/yaffs_tagsvalidity.c b/target/linux/generic/files/fs/yaffs2/yaffs_tagsvalidity.c
new file mode 100644
index 0000000000..9e0bd1cf56
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/yaffs_tagsvalidity.c
@@ -0,0 +1,28 @@
+/*
+ * YAFFS: Yet Another Flash File System. A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ *   for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "yaffs_tagsvalidity.h"
+
+void yaffs_InitialiseTags(yaffs_ExtendedTags * tags)
+{
+	memset(tags, 0, sizeof(yaffs_ExtendedTags));
+	tags->validMarker0 = 0xAAAAAAAA;
+	tags->validMarker1 = 0x55555555;
+}
+
+int yaffs_ValidateTags(yaffs_ExtendedTags * tags)
+{
+	return (tags->validMarker0 == 0xAAAAAAAA &&
+		tags->validMarker1 == 0x55555555);
+
+}
diff --git a/target/linux/generic/files/fs/yaffs2/yaffs_tagsvalidity.h b/target/linux/generic/files/fs/yaffs2/yaffs_tagsvalidity.h
new file mode 100644
index 0000000000..2fd0c24ed2
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/yaffs_tagsvalidity.h
@@ -0,0 +1,24 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ *   for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+
+#ifndef __YAFFS_TAGS_VALIDITY_H__
+#define __YAFFS_TAGS_VALIDITY_H__
+
+#include "yaffs_guts.h"
+
+void yaffs_InitialiseTags(yaffs_ExtendedTags * tags);
+int yaffs_ValidateTags(yaffs_ExtendedTags * tags);
+#endif
diff --git a/target/linux/generic/files/fs/yaffs2/yaffsinterface.h b/target/linux/generic/files/fs/yaffs2/yaffsinterface.h
new file mode 100644
index 0000000000..810837a32d
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/yaffsinterface.h
@@ -0,0 +1,21 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ *   for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+#ifndef __YAFFSINTERFACE_H__
+#define __YAFFSINTERFACE_H__
+
+int yaffs_Initialise(unsigned nBlocks);
+
+#endif
diff --git a/target/linux/generic/files/fs/yaffs2/yportenv.h b/target/linux/generic/files/fs/yaffs2/yportenv.h
new file mode 100644
index 0000000000..15ac28121c
--- /dev/null
+++ b/target/linux/generic/files/fs/yaffs2/yportenv.h
@@ -0,0 +1,187 @@
+/*
+ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
+ *
+ * Copyright (C) 2002-2007 Aleph One Ltd.
+ *   for Toby Churchill Ltd and Brightstar Engineering
+ *
+ * Created by Charles Manning <charles@aleph1.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1 as
+ * published by the Free Software Foundation.
+ *
+ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+ */
+
+
+#ifndef __YPORTENV_H__
+#define __YPORTENV_H__
+
+#if defined CONFIG_YAFFS_WINCE
+
+#include "ywinceenv.h"
+
+#elif  defined __KERNEL__
+
+#include "moduleconfig.h"
+
+/* Linux kernel */
+#include <linux/version.h>
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19))
+#include <linux/config.h>
+#endif
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+
+#define YCHAR char
+#define YUCHAR unsigned char
+#define _Y(x)     x
+#define yaffs_strcpy(a,b)    strcpy(a,b)
+#define yaffs_strncpy(a,b,c) strncpy(a,b,c)
+#define yaffs_strncmp(a,b,c) strncmp(a,b,c)
+#define yaffs_strlen(s)	     strlen(s)
+#define yaffs_sprintf	     sprintf
+#define yaffs_toupper(a)     toupper(a)
+
+#define Y_INLINE inline
+
+#define YAFFS_LOSTNFOUND_NAME		"lost+found"
+#define YAFFS_LOSTNFOUND_PREFIX		"obj"
+
+/* #define YPRINTF(x) printk x */
+#define YMALLOC(x) kmalloc(x,GFP_KERNEL)
+#define YFREE(x)   kfree(x)
+#define YMALLOC_ALT(x) vmalloc(x)
+#define YFREE_ALT(x)   vfree(x)
+#define YMALLOC_DMA(x) YMALLOC(x)
+
+// KR - added for use in scan so processes aren't blocked indefinitely.
+#define YYIELD() schedule()
+
+#define YAFFS_ROOT_MODE			0666
+#define YAFFS_LOSTNFOUND_MODE		0666
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+#define Y_CURRENT_TIME CURRENT_TIME.tv_sec
+#define Y_TIME_CONVERT(x) (x).tv_sec
+#else
+#define Y_CURRENT_TIME CURRENT_TIME
+#define Y_TIME_CONVERT(x) (x)
+#endif
+
+#define yaffs_SumCompare(x,y) ((x) == (y))
+#define yaffs_strcmp(a,b) strcmp(a,b)
+
+#define TENDSTR "\n"
+#define TSTR(x) KERN_WARNING x
+#define TOUT(p) printk p
+
+#define yaffs_trace(mask, fmt, args...) \
+	do { if ((mask) & (yaffs_traceMask|YAFFS_TRACE_ERROR)) \
+		printk(KERN_WARNING "yaffs: " fmt, ## args); \
+	} while (0)
+
+#define compile_time_assertion(assertion) \
+	({ int x = __builtin_choose_expr(assertion, 0, (void)0); (void) x; })
+
+#elif defined CONFIG_YAFFS_DIRECT
+
+/* Direct interface */
+#include "ydirectenv.h"
+
+#elif defined CONFIG_YAFFS_UTIL
+
+/* Stuff for YAFFS utilities */
+
+#include "stdlib.h"
+#include "stdio.h"
+#include "string.h"
+
+#include "devextras.h"
+
+#define YMALLOC(x) malloc(x)
+#define YFREE(x)   free(x)
+#define YMALLOC_ALT(x) malloc(x)
+#define YFREE_ALT(x) free(x)
+
+#define YCHAR char
+#define YUCHAR unsigned char
+#define _Y(x)     x
+#define yaffs_strcpy(a,b)    strcpy(a,b)
+#define yaffs_strncpy(a,b,c) strncpy(a,b,c)
+#define yaffs_strlen(s)	     strlen(s)
+#define yaffs_sprintf	     sprintf
+#define yaffs_toupper(a)     toupper(a)
+
+#define Y_INLINE inline
+
+/* #define YINFO(s) YPRINTF(( __FILE__ " %d %s\n",__LINE__,s)) */
+/* #define YALERT(s) YINFO(s) */
+
+#define TENDSTR "\n"
+#define TSTR(x) x
+#define TOUT(p) printf p
+
+#define YAFFS_LOSTNFOUND_NAME		"lost+found"
+#define YAFFS_LOSTNFOUND_PREFIX		"obj"
+/* #define YPRINTF(x) printf x */
+
+#define YAFFS_ROOT_MODE				0666
+#define YAFFS_LOSTNFOUND_MODE		0666
+
+#define yaffs_SumCompare(x,y) ((x) == (y))
+#define yaffs_strcmp(a,b) strcmp(a,b)
+
+#else
+/* Should have specified a configuration type */
+#error Unknown configuration
+
+#endif
+
+/* see yaffs_fs.c */
+extern unsigned int yaffs_traceMask;
+extern unsigned int yaffs_wr_attempts;
+
+/*
+ * Tracing flags.
+ * The flags masked in YAFFS_TRACE_ALWAYS are always traced.
+ */
+
+#define YAFFS_TRACE_OS			0x00000002
+#define YAFFS_TRACE_ALLOCATE		0x00000004
+#define YAFFS_TRACE_SCAN		0x00000008
+#define YAFFS_TRACE_BAD_BLOCKS		0x00000010
+#define YAFFS_TRACE_ERASE		0x00000020
+#define YAFFS_TRACE_GC			0x00000040
+#define YAFFS_TRACE_WRITE		0x00000080
+#define YAFFS_TRACE_TRACING		0x00000100
+#define YAFFS_TRACE_DELETION		0x00000200
+#define YAFFS_TRACE_BUFFERS		0x00000400
+#define YAFFS_TRACE_NANDACCESS		0x00000800
+#define YAFFS_TRACE_GC_DETAIL		0x00001000
+#define YAFFS_TRACE_SCAN_DEBUG		0x00002000
+#define YAFFS_TRACE_MTD			0x00004000
+#define YAFFS_TRACE_CHECKPOINT		0x00008000
+
+#define YAFFS_TRACE_VERIFY		0x00010000
+#define YAFFS_TRACE_VERIFY_NAND		0x00020000
+#define YAFFS_TRACE_VERIFY_FULL		0x00040000
+#define YAFFS_TRACE_VERIFY_ALL		0x000F0000
+
+
+#define YAFFS_TRACE_ERROR		0x40000000
+#define YAFFS_TRACE_BUG			0x80000000
+#define YAFFS_TRACE_ALWAYS		0xF0000000
+
+
+#define T(mask,p) do{ if((mask) & (yaffs_traceMask | YAFFS_TRACE_ALWAYS)) TOUT(p);} while(0)
+
+#ifndef CONFIG_YAFFS_WINCE
+#define YBUG() T(YAFFS_TRACE_BUG,(TSTR("==>> yaffs bug: " __FILE__ " %d" TENDSTR),__LINE__))
+#endif
+
+#endif
diff --git a/target/linux/generic/files/include/linux/glamo-engine.h b/target/linux/generic/files/include/linux/glamo-engine.h
new file mode 100644
index 0000000000..516d45fa6e
--- /dev/null
+++ b/target/linux/generic/files/include/linux/glamo-engine.h
@@ -0,0 +1,27 @@
+#ifndef __GLAMO_ENGINE_H
+#define __GLAMO_ENGINE_H
+
+enum glamo_engine {
+	GLAMO_ENGINE_CAPTURE = 0,
+	GLAMO_ENGINE_ISP = 1,
+	GLAMO_ENGINE_JPEG = 2,
+	GLAMO_ENGINE_MPEG_ENC = 3,
+	GLAMO_ENGINE_MPEG_DEC = 4,
+	GLAMO_ENGINE_LCD = 5,
+	GLAMO_ENGINE_CMDQ = 6,
+	GLAMO_ENGINE_2D = 7,
+	GLAMO_ENGINE_3D = 8,
+	GLAMO_ENGINE_MMC = 9,
+	GLAMO_ENGINE_MICROP0 = 10,
+	GLAMO_ENGINE_RISC = 11,
+	GLAMO_ENGINE_MICROP1_MPEG_ENC = 12,
+	GLAMO_ENGINE_MICROP1_MPEG_DEC = 13,
+#if 0
+	GLAMO_ENGINE_H264_DEC = 14,
+	GLAMO_ENGINE_RISC1 = 15,
+	GLAMO_ENGINE_SPI = 16,
+#endif
+	__NUM_GLAMO_ENGINES
+};
+
+#endif
diff --git a/target/linux/generic/files/include/linux/glamofb.h b/target/linux/generic/files/include/linux/glamofb.h
new file mode 100644
index 0000000000..5f9fab5a48
--- /dev/null
+++ b/target/linux/generic/files/include/linux/glamofb.h
@@ -0,0 +1,35 @@
+#ifndef _LINUX_GLAMOFB_H
+#define _LINUX_GLAMOFB_H
+
+#include <linux/fb.h>
+
+#ifdef __KERNEL__
+
+struct glamo_core;
+struct glamofb_handle;
+
+struct glamo_fb_platform_data {
+    int width, height;
+
+    int num_modes;
+    struct fb_videomode *modes;
+
+    struct glamo_core *core;
+};
+
+int glamofb_cmd_mode(struct glamofb_handle *gfb, int on);
+int glamofb_cmd_write(struct glamofb_handle *gfb, u_int16_t val);
+
+#ifdef CONFIG_MFD_GLAMO
+void glamo_lcm_reset(struct platform_device *pdev, int level);
+#else
+#define glamo_lcm_reset(...) do {} while (0)
+#endif
+
+#endif
+
+#define GLAMOFB_ENGINE_ENABLE _IOW('F', 0x1, __u32)
+#define GLAMOFB_ENGINE_DISABLE _IOW('F', 0x2, __u32)
+#define GLAMOFB_ENGINE_RESET _IOW('F', 0x3, __u32)
+
+#endif
diff --git a/target/linux/generic/files/include/linux/gpio_buttons.h b/target/linux/generic/files/include/linux/gpio_buttons.h
new file mode 100644
index 0000000000..f85b993ed2
--- /dev/null
+++ b/target/linux/generic/files/include/linux/gpio_buttons.h
@@ -0,0 +1,33 @@
+/*
+ *  Definitions for the GPIO buttons interface driver
+ *
+ *  Copyright (C) 2007-2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This file was based on: /include/linux/gpio_keys.h
+ *	The original gpio_keys.h seems not to have a license.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _GPIO_BUTTONS_H_
+#define _GPIO_BUTTONS_H_
+
+struct gpio_button {
+	int	gpio;		/* GPIO line number */
+	int	active_low;
+	char	*desc;		/* button description */
+	int	type;		/* input event type (EV_KEY, EV_SW) */
+	int	code;		/* input event code (KEY_*, SW_*) */
+	int	threshold;	/* count threshold */
+};
+
+struct gpio_buttons_platform_data {
+	struct gpio_button *buttons;
+	int	nbuttons;		/* number of buttons */
+	int	poll_interval;		/* polling interval */
+};
+
+#endif /* _GPIO_BUTTONS_H_ */
diff --git a/target/linux/generic/files/include/linux/gpio_dev.h b/target/linux/generic/files/include/linux/gpio_dev.h
new file mode 100644
index 0000000000..a2a4b51c78
--- /dev/null
+++ b/target/linux/generic/files/include/linux/gpio_dev.h
@@ -0,0 +1,42 @@
+#ifndef _GPIO_DEV_H__
+#define _GPIO_DEV_H__
+
+/*********************************************************************
+ *
+ * This Linux kernel header is expanded from the original driver
+ * (gpio_dev) by John Crispin. It provides an ioctl based interface to
+ * GPIO pins via the /dev/gpio char device and gpiolib within the kernel.
+ * The third argument to each ioctl is the GPIO pin number.
+ *
+ * This driver has been tested with lk 2.6.31 and works. The original
+ * driver fails quietly with this version. The protocol is now a bit
+ * different: the ioctl(fd, GPIO_REQUEST, <pin>) should be called
+ * after the open("/dev/gpio", O_RDWR) to determine if the <pin> is
+ * already in use. If the ioctl is successful (i.e. returns 0 for not
+ * in use) then the <pin> is claimed by this driver and
+ * ioctl(fd, GPIO_FREE, <pin>) should be called prior to close(fd) .
+ * 
+ * See <kernel_source>/Documentation/gpio.txt
+ * Note that kernel designers prefer the use of the sysfs gpio interface.
+ * This char driver is easier to use from code and faster.
+ ********************************************************************/
+
+/* This header can be included in both the user and kernel spaces */
+/* The _IO macro is defined in sys/ioctl.h */
+
+#define IOC_GPIODEV_MAGIC  'B'
+
+#define GPIO_GET        _IO(IOC_GPIODEV_MAGIC, 10)
+#define GPIO_SET        _IO(IOC_GPIODEV_MAGIC, 11)
+#define GPIO_CLEAR      _IO(IOC_GPIODEV_MAGIC, 12)
+#define GPIO_DIR_IN     _IO(IOC_GPIODEV_MAGIC, 13)
+#define GPIO_DIR_OUT    _IO(IOC_GPIODEV_MAGIC, 14)
+        /* Sets the direction out and clears the <pin> (low) */
+
+#define GPIO_DIR_HIGH   _IO(IOC_GPIODEV_MAGIC, 15)
+        /* Sets the direction out and sets the <pin> (high) */
+#define GPIO_REQUEST    _IO(IOC_GPIODEV_MAGIC, 16)
+#define GPIO_FREE       _IO(IOC_GPIODEV_MAGIC, 17)
+#define GPIO_CAN_SLEEP  _IO(IOC_GPIODEV_MAGIC, 18)
+
+#endif
diff --git a/target/linux/generic/files/include/linux/myloader.h b/target/linux/generic/files/include/linux/myloader.h
new file mode 100644
index 0000000000..dcba6eb62a
--- /dev/null
+++ b/target/linux/generic/files/include/linux/myloader.h
@@ -0,0 +1,120 @@
+/*
+ *  Compex's MyLoader specific definitions
+ *
+ *  Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MYLOADER_H_
+#define _MYLOADER_H_
+
+/* Myloader specific magic numbers */
+#define MYLO_MAGIC_SYS_PARAMS	0x20021107
+#define MYLO_MAGIC_PARTITIONS	0x20021103
+#define MYLO_MAGIC_BOARD_PARAMS	0x20021103
+
+/* Vendor ID's (seems to be same as the PCI vendor ID's) */
+#define VENID_COMPEX		0x11F6
+
+/* Devices based on the ADM5120 */
+#define DEVID_COMPEX_NP27G	0x0078
+#define DEVID_COMPEX_NP28G	0x044C
+#define DEVID_COMPEX_NP28GHS	0x044E
+#define DEVID_COMPEX_WP54Gv1C	0x0514
+#define DEVID_COMPEX_WP54G	0x0515
+#define DEVID_COMPEX_WP54AG	0x0546
+#define DEVID_COMPEX_WPP54AG	0x0550
+#define DEVID_COMPEX_WPP54G	0x0555
+
+/* Devices based on the Atheros AR2317 */
+#define DEVID_COMPEX_NP25G	0x05E6
+#define DEVID_COMPEX_WPE53G	0x05DC
+
+/* Devices based on the Atheros AR71xx */
+#define DEVID_COMPEX_WP543	0x0640
+
+/* Devices based on the IXP422 */
+#define DEVID_COMPEX_WP18	0x047E
+#define DEVID_COMPEX_NP18A	0x0489
+
+/* Other devices */
+#define DEVID_COMPEX_NP26G8M	0x03E8
+#define DEVID_COMPEX_NP26G16M	0x03E9
+
+struct mylo_partition {
+	uint16_t	flags;	/* partition flags */
+	uint16_t	type;	/* type of the partition */
+	uint32_t	addr;	/* relative address of the partition from the
+				   flash start */
+	uint32_t	size;	/* size of the partition in bytes */
+	uint32_t	param;	/* if this is the active partition, the
+				   MyLoader load code to this address */
+};
+
+#define PARTITION_FLAG_ACTIVE	0x8000 /* this is the active partition,
+					* MyLoader loads firmware from here */
+#define PARTITION_FLAG_ISRAM	0x2000 /* FIXME: this is a RAM partition? */
+#define PARTIIION_FLAG_RAMLOAD	0x1000 /* FIXME: load this partition into the RAM? */
+#define PARTITION_FLAG_PRELOAD	0x0800 /* the partition data preloaded to RAM
+					* before decompression */
+#define PARTITION_FLAG_LZMA	0x0100 /* partition data compressed by LZMA */
+#define PARTITION_FLAG_HAVEHDR  0x0002 /* the partition data have a header */
+
+#define PARTITION_TYPE_FREE	0
+#define PARTITION_TYPE_USED	1
+
+#define MYLO_MAX_PARTITIONS	8	/* maximum number of partitions in the
+					   partition table */
+
+struct mylo_partition_table {
+	uint32_t	magic;		/* must be MYLO_MAGIC_PARTITIONS */
+	uint32_t	res0;		/* unknown/unused */
+	uint32_t	res1;		/* unknown/unused */
+	uint32_t 	res2;		/* unknown/unused */
+	struct mylo_partition partitions[MYLO_MAX_PARTITIONS];
+};
+
+struct mylo_partition_header {
+	uint32_t	len;		/* length of the partition data */
+	uint32_t	crc;		/* CRC value of the partition data */
+};
+
+struct mylo_system_params {
+	uint32_t	magic;		/* must be MYLO_MAGIC_SYS_PARAMS */
+	uint32_t	res0;
+	uint32_t	res1;
+	uint32_t	mylo_ver;
+	uint16_t	vid;		/* Vendor ID */
+	uint16_t	did;		/* Device ID */
+	uint16_t	svid;		/* Sub Vendor ID */
+	uint16_t	sdid;		/* Sub Device ID */
+	uint32_t	rev;		/* device revision */
+	uint32_t	fwhi;
+	uint32_t	fwlo;
+	uint32_t	tftp_addr;
+	uint32_t	prog_start;
+	uint32_t	flash_size;	/* size of boot FLASH in bytes */
+	uint32_t	dram_size;	/* size of onboard RAM in bytes */
+};
+
+struct mylo_eth_addr {
+	uint8_t	mac[6];
+	uint8_t	csum[2];
+};
+
+#define MYLO_ETHADDR_COUNT	8	/* maximum number of ethernet address
+					   in the board parameters */
+
+struct mylo_board_params {
+	uint32_t	magic;	/* must be MYLO_MAGIC_BOARD_PARAMS */
+	uint32_t	res0;
+	uint32_t	res1;
+	uint32_t	res2;
+	struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT];
+};
+
+#endif /* _MYLOADER_H_*/
diff --git a/target/linux/generic/files/include/linux/pwm/pwm.h b/target/linux/generic/files/include/linux/pwm/pwm.h
new file mode 100644
index 0000000000..e01cca9036
--- /dev/null
+++ b/target/linux/generic/files/include/linux/pwm/pwm.h
@@ -0,0 +1,165 @@
+/*
+ * include/linux/pwm.h
+ *
+ * Copyright (C) 2008 Bill Gatliff < bgat@billgatliff.com>
+ *
+ * This program is free software; you may redistribute and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+#ifndef __LINUX_PWM_H
+#define __LINUX_PWM_H
+
+enum {
+	PWM_CONFIG_DUTY_TICKS = BIT(0),
+	PWM_CONFIG_PERIOD_TICKS = BIT(1),
+	PWM_CONFIG_POLARITY = BIT(2),
+	PWM_CONFIG_START = BIT(3),
+	PWM_CONFIG_STOP = BIT(4),
+
+	PWM_CONFIG_HANDLER = BIT(5),
+
+	PWM_CONFIG_DUTY_NS = BIT(6),
+	PWM_CONFIG_DUTY_PERCENT = BIT(7),
+	PWM_CONFIG_PERIOD_NS = BIT(8),
+};
+
+struct pwm_channel;
+struct work_struct;
+
+typedef int (*pwm_handler_t)(struct pwm_channel *p, void *data);
+typedef void (*pwm_callback_t)(struct pwm_channel *p);
+
+struct pwm_channel_config {
+	int config_mask;
+	unsigned long duty_ticks;
+	unsigned long period_ticks;
+	int polarity;
+
+	pwm_handler_t handler;
+
+	unsigned long duty_ns;
+	unsigned long period_ns;
+	int duty_percent;
+};
+
+struct pwm_device {
+	struct list_head list;
+	spinlock_t list_lock;
+	struct device *dev;
+	struct module *owner;
+	struct pwm_channel *channels;
+
+	const char *bus_id;
+	int nchan;
+
+	int	(*request)	(struct pwm_channel *p);
+	void	(*free)		(struct pwm_channel *p);
+	int	(*config)	(struct pwm_channel *p,
+				 struct pwm_channel_config *c);
+	int	(*config_nosleep)(struct pwm_channel *p,
+				  struct pwm_channel_config *c);
+	int	(*synchronize)	(struct pwm_channel *p,
+				 struct pwm_channel *to_p);
+	int	(*unsynchronize)(struct pwm_channel *p,
+				 struct pwm_channel *from_p);
+	int	(*set_callback)	(struct pwm_channel *p,
+				 pwm_callback_t callback);
+};
+
+int pwm_register(struct pwm_device *pwm);
+int pwm_unregister(struct pwm_device *pwm);
+
+enum {
+	FLAG_REQUESTED = 0,
+	FLAG_STOP = 1,
+};
+
+struct pwm_channel {
+	struct list_head list;
+	struct pwm_device *pwm;
+	const char *requester;
+	pid_t pid;
+	int chan;
+	unsigned long flags;
+	unsigned long tick_hz;
+
+	spinlock_t lock;
+	struct completion complete;
+
+	pwm_callback_t callback;
+
+	struct work_struct handler_work;
+	pwm_handler_t handler;
+	void *handler_data;
+
+	int active_high;
+	unsigned long period_ticks;
+	unsigned long duty_ticks;
+};
+
+struct gpio_pwm_platform_data {
+	int gpio;
+};
+
+struct pwm_channel *
+pwm_request(const char *bus_id, int chan,
+	    const char *requester);
+
+void pwm_free(struct pwm_channel *pwm);
+
+int pwm_config_nosleep(struct pwm_channel *pwm,
+		       struct pwm_channel_config *c);
+
+int pwm_config(struct pwm_channel *pwm,
+	       struct pwm_channel_config *c);
+
+unsigned long pwm_ns_to_ticks(struct pwm_channel *pwm,
+			      unsigned long nsecs);
+
+unsigned long pwm_ticks_to_ns(struct pwm_channel *pwm,
+			      unsigned long ticks);
+
+int pwm_set_period_ns(struct pwm_channel *pwm,
+		      unsigned long period_ns);
+
+unsigned long int pwm_get_period_ns(struct pwm_channel *pwm);
+
+int pwm_set_duty_ns(struct pwm_channel *pwm,
+		    unsigned long duty_ns);
+
+int pwm_set_duty_percent(struct pwm_channel *pwm,
+			 int percent);
+
+unsigned long pwm_get_duty_ns(struct pwm_channel *pwm);
+
+int pwm_set_polarity(struct pwm_channel *pwm,
+		     int active_high);
+
+int pwm_start(struct pwm_channel *pwm);
+
+int pwm_stop(struct pwm_channel *pwm);
+
+int pwm_set_handler(struct pwm_channel *pwm,
+		    pwm_handler_t handler,
+		    void *data);
+
+int pwm_synchronize(struct pwm_channel *p,
+		    struct pwm_channel *to_p);
+
+
+int pwm_unsynchronize(struct pwm_channel *p,
+		      struct pwm_channel *from_p);
+
+
+#endif /* __LINUX_PWM_H */
diff --git a/target/linux/generic/files/include/linux/rtl8366rb.h b/target/linux/generic/files/include/linux/rtl8366rb.h
new file mode 100644
index 0000000000..053e2ec04f
--- /dev/null
+++ b/target/linux/generic/files/include/linux/rtl8366rb.h
@@ -0,0 +1,21 @@
+/*
+ * Platform data definition for the Realtek RTL8366S ethernet switch driver
+ *
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _RTL8366RB_H
+#define _RTL8366RB_H
+
+#define RTL8366RB_DRIVER_NAME	"rtl8366rb"
+
+struct rtl8366rb_platform_data {
+	unsigned	gpio_sda;
+	unsigned	gpio_sck;
+};
+
+#endif /*  _RTL8366RB_SMI_H */
diff --git a/target/linux/generic/files/include/linux/rtl8366s.h b/target/linux/generic/files/include/linux/rtl8366s.h
new file mode 100644
index 0000000000..09173ec200
--- /dev/null
+++ b/target/linux/generic/files/include/linux/rtl8366s.h
@@ -0,0 +1,21 @@
+/*
+ * Platform data definition for the Realtek RTL8366S ethernet switch driver
+ *
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _RTL8366S_H
+#define _RTL8366S_H
+
+#define RTL8366S_DRIVER_NAME	"rtl8366s"
+
+struct rtl8366s_platform_data {
+	unsigned	gpio_sda;
+	unsigned	gpio_sck;
+};
+
+#endif /*  _RTL8366_SMI_H */
diff --git a/target/linux/generic/files/include/linux/switch.h b/target/linux/generic/files/include/linux/switch.h
new file mode 100644
index 0000000000..25aedb83b0
--- /dev/null
+++ b/target/linux/generic/files/include/linux/switch.h
@@ -0,0 +1,172 @@
+/*
+ * switch.h: Switch configuration API
+ *
+ * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_SWITCH_H
+#define __LINUX_SWITCH_H
+
+#include <linux/types.h>
+#include <linux/netdevice.h>
+#include <linux/netlink.h>
+#include <linux/genetlink.h>
+#ifndef __KERNEL__
+#include <netlink/netlink.h>
+#include <netlink/genl/genl.h>
+#include <netlink/genl/ctrl.h>
+#else
+#include <net/genetlink.h>
+#endif
+
+/* main attributes */
+enum {
+	SWITCH_ATTR_UNSPEC,
+	/* global */
+	SWITCH_ATTR_TYPE,
+	/* device */
+	SWITCH_ATTR_ID,
+	SWITCH_ATTR_NAME,
+	SWITCH_ATTR_DEV_NAME,
+	SWITCH_ATTR_VLANS,
+	SWITCH_ATTR_PORTS,
+	SWITCH_ATTR_CPU_PORT,
+	/* attributes */
+	SWITCH_ATTR_OP_ID,
+	SWITCH_ATTR_OP_TYPE,
+	SWITCH_ATTR_OP_NAME,
+	SWITCH_ATTR_OP_PORT,
+	SWITCH_ATTR_OP_VLAN,
+	SWITCH_ATTR_OP_VALUE_INT,
+	SWITCH_ATTR_OP_VALUE_STR,
+	SWITCH_ATTR_OP_VALUE_PORTS,
+	SWITCH_ATTR_OP_DESCRIPTION,
+	/* port lists */
+	SWITCH_ATTR_PORT,
+	SWITCH_ATTR_MAX
+};
+
+/* commands */
+enum {
+	SWITCH_CMD_UNSPEC,
+	SWITCH_CMD_GET_SWITCH,
+	SWITCH_CMD_NEW_ATTR,
+	SWITCH_CMD_LIST_GLOBAL,
+	SWITCH_CMD_GET_GLOBAL,
+	SWITCH_CMD_SET_GLOBAL,
+	SWITCH_CMD_LIST_PORT,
+	SWITCH_CMD_GET_PORT,
+	SWITCH_CMD_SET_PORT,
+	SWITCH_CMD_LIST_VLAN,
+	SWITCH_CMD_GET_VLAN,
+	SWITCH_CMD_SET_VLAN
+};
+
+/* data types */
+enum switch_val_type {
+	SWITCH_TYPE_UNSPEC,
+	SWITCH_TYPE_INT,
+	SWITCH_TYPE_STRING,
+	SWITCH_TYPE_PORTS,
+	SWITCH_TYPE_NOVAL,
+};
+
+/* port nested attributes */
+enum {
+	SWITCH_PORT_UNSPEC,
+	SWITCH_PORT_ID,
+	SWITCH_PORT_FLAG_TAGGED,
+	SWITCH_PORT_ATTR_MAX
+};
+
+#define SWITCH_ATTR_DEFAULTS_OFFSET	0x1000
+
+#ifdef __KERNEL__
+
+struct switch_dev;
+struct switch_op;
+struct switch_val;
+struct switch_attr;
+struct switch_attrlist;
+
+int register_switch(struct switch_dev *dev, struct net_device *netdev);
+void unregister_switch(struct switch_dev *dev);
+
+struct switch_attrlist {
+	/* filled in by the driver */
+	int n_attr;
+	const struct switch_attr *attr;
+};
+
+
+struct switch_dev {
+	int id;
+	void *priv;
+	const char *name;
+
+	/* NB: either devname or netdev must be set */
+	const char *devname;
+	struct net_device *netdev;
+
+	int ports;
+	int vlans;
+	int cpu_port;
+	struct switch_attrlist attr_global, attr_port, attr_vlan;
+
+	spinlock_t lock;
+	struct switch_port *portbuf;
+	struct list_head dev_list;
+	unsigned long def_global, def_port, def_vlan;
+
+	int (*get_vlan_ports)(struct switch_dev *dev, struct switch_val *val);
+	int (*set_vlan_ports)(struct switch_dev *dev, struct switch_val *val);
+	int (*get_port_pvid)(struct switch_dev *dev, int port, int *val);
+	int (*set_port_pvid)(struct switch_dev *dev, int port, int val);
+	int (*apply_config)(struct switch_dev *dev);
+	int (*reset_switch)(struct switch_dev *dev);
+};
+
+struct switch_port {
+	u32 id;
+	u32 flags;
+};
+
+struct switch_val {
+	const struct switch_attr *attr;
+	int port_vlan;
+	int len;
+	union {
+		const char *s;
+		u32 i;
+		struct switch_port *ports;
+	} value;
+};
+
+struct switch_attr {
+	int disabled;
+	int type;
+	const char *name;
+	const char *description;
+
+	int (*set)(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val);
+	int (*get)(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val);
+
+	/* for driver internal use */
+	int id;
+	int ofs;
+	int max;
+};
+
+#endif
+
+#endif
diff --git a/target/linux/generic/image/Makefile b/target/linux/generic/image/Makefile
new file mode 100644
index 0000000000..e733e0a37a
--- /dev/null
+++ b/target/linux/generic/image/Makefile
@@ -0,0 +1,12 @@
+# 
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+# use default targets for everything
+
+$(eval $(call BuildImage))
diff --git a/target/linux/generic/image/initramfs-base-files.txt b/target/linux/generic/image/initramfs-base-files.txt
new file mode 100644
index 0000000000..eda5d0d278
--- /dev/null
+++ b/target/linux/generic/image/initramfs-base-files.txt
@@ -0,0 +1,9 @@
+nod /dev/console 600 0 0 c 5 1
+nod /dev/null 666 0 0 c 1 3
+nod /dev/zero 666 0 0 c 1 5
+nod /dev/tty 666 0 0 c 5 0
+nod /dev/tty0 660 0 0 c 4 0
+nod /dev/tty1 660 0 0 c 4 1
+nod /dev/random 666 0 0 c 1 8
+nod /dev/urandom 666 0 0 c 1 9
+dir /dev/pts 755 0 0
diff --git a/target/linux/generic/image/lzma-loader/Makefile b/target/linux/generic/image/lzma-loader/Makefile
new file mode 100644
index 0000000000..d75a4468b0
--- /dev/null
+++ b/target/linux/generic/image/lzma-loader/Makefile
@@ -0,0 +1,46 @@
+# 
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME := loader
+PKG_VERSION := 0.05
+
+PKG_BUILD_DIR := $(KDIR)/$(PKG_NAME)-$(PKG_VERSION)$(LOADER_TYPE)
+
+$(PKG_BUILD_DIR)/.prepared:
+	mkdir $(PKG_BUILD_DIR)
+	$(CP) ./src/* $(PKG_BUILD_DIR)/
+	touch $@
+
+$(PKG_BUILD_DIR)/lzma.elf: $(PKG_BUILD_DIR)/.prepared $(PKG_BUILD_DIR)/vmlinux.lzma
+	PATH="$(TARGET_PATH)" $(MAKE) -C $(PKG_BUILD_DIR) \
+		CC="$(TARGET_CC)" CROSS_COMPILE="$(TARGET_CROSS)" \
+		RAMSIZE=$(RAMSIZE) \
+		LOADADDR=$(LOADADDR) \
+		KERNEL_ENTRY=$(KERNEL_ENTRY) \
+		IMAGE_COPY=$(IMAGE_COPY)
+
+
+$(PKG_BUILD_DIR)/vmlinux.lzma: $(KDIR)/vmlinux.lzma
+	$(CP) $< $@
+
+$(KDIR)/loader$(LOADER_TYPE).elf: $(PKG_BUILD_DIR)/lzma.elf
+	$(CP) $< $@
+
+$(KDIR)/loader$(LOADER_TYPE).bin: $(PKG_BUILD_DIR)/lzma.bin
+	$(CP) $< $@
+
+download: 
+prepare: $(PKG_BUILD_DIR)/.prepared
+compile: $(KDIR)/loader$(LOADER_TYPE).elf $(KDIR)/loader$(LOADER_TYPE).bin
+install:
+
+clean:
+	rm -rf $(PKG_BUILD_DIR)
+	rm -f $(KDIR)/loader.elf
+	rm -f $(KDIR)/loader.bin
diff --git a/target/linux/generic/image/lzma-loader/src/LzmaDecode.c b/target/linux/generic/image/lzma-loader/src/LzmaDecode.c
new file mode 100644
index 0000000000..c90a0d3ef4
--- /dev/null
+++ b/target/linux/generic/image/lzma-loader/src/LzmaDecode.c
@@ -0,0 +1,590 @@
+/*
+  LzmaDecode.c
+  LZMA Decoder (optimized for Speed version)
+  
+  LZMA SDK 4.22 Copyright (c) 1999-2005 Igor Pavlov (2005-06-10)
+  http://www.7-zip.org/
+
+  LZMA SDK is licensed under two licenses:
+  1) GNU Lesser General Public License (GNU LGPL)
+  2) Common Public License (CPL)
+  It means that you can select one of these two licenses and 
+  follow rules of that license.
+
+  SPECIAL EXCEPTION:
+  Igor Pavlov, as the author of this Code, expressly permits you to 
+  statically or dynamically link your Code (or bind by name) to the 
+  interfaces of this file without subjecting your linked Code to the 
+  terms of the CPL or GNU LGPL. Any modifications or additions 
+  to this file, however, are subject to the LGPL or CPL terms.
+*/
+
+#include "LzmaDecode.h"
+
+#ifndef Byte
+#define Byte unsigned char
+#endif
+
+#define kNumTopBits 24
+#define kTopValue ((UInt32)1 << kNumTopBits)
+
+#define kNumBitModelTotalBits 11
+#define kBitModelTotal (1 << kNumBitModelTotalBits)
+#define kNumMoveBits 5
+
+#define RC_READ_BYTE (*Buffer++)
+
+#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \
+  { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }}
+
+#ifdef _LZMA_IN_CB
+
+#define RC_TEST { if (Buffer == BufferLim) \
+  { SizeT size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \
+  BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }}
+
+#define RC_INIT Buffer = BufferLim = 0; RC_INIT2
+
+#else
+
+#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; }
+
+#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2
+ 
+#endif
+
+#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; }
+
+#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound)
+#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits;
+#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits;
+
+#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \
+  { UpdateBit0(p); mi <<= 1; A0; } else \
+  { UpdateBit1(p); mi = (mi + mi) + 1; A1; } 
+  
+#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;)               
+
+#define RangeDecoderBitTreeDecode(probs, numLevels, res) \
+  { int i = numLevels; res = 1; \
+  do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \
+  res -= (1 << numLevels); }
+
+
+#define kNumPosBitsMax 4
+#define kNumPosStatesMax (1 << kNumPosBitsMax)
+
+#define kLenNumLowBits 3
+#define kLenNumLowSymbols (1 << kLenNumLowBits)
+#define kLenNumMidBits 3
+#define kLenNumMidSymbols (1 << kLenNumMidBits)
+#define kLenNumHighBits 8
+#define kLenNumHighSymbols (1 << kLenNumHighBits)
+
+#define LenChoice 0
+#define LenChoice2 (LenChoice + 1)
+#define LenLow (LenChoice2 + 1)
+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
+#define kNumLenProbs (LenHigh + kLenNumHighSymbols) 
+
+
+#define kNumStates 12
+#define kNumLitStates 7
+
+#define kStartPosModelIndex 4
+#define kEndPosModelIndex 14
+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
+
+#define kNumPosSlotBits 6
+#define kNumLenToPosStates 4
+
+#define kNumAlignBits 4
+#define kAlignTableSize (1 << kNumAlignBits)
+
+#define kMatchMinLen 2
+
+#define IsMatch 0
+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
+#define IsRepG0 (IsRep + kNumStates)
+#define IsRepG1 (IsRepG0 + kNumStates)
+#define IsRepG2 (IsRepG1 + kNumStates)
+#define IsRep0Long (IsRepG2 + kNumStates)
+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
+#define LenCoder (Align + kAlignTableSize)
+#define RepLenCoder (LenCoder + kNumLenProbs)
+#define Literal (RepLenCoder + kNumLenProbs)
+
+#if Literal != LZMA_BASE_SIZE
+StopCompilingDueBUG
+#endif
+
+#if 0
+int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size)
+{
+  unsigned char prop0;
+  if (size < LZMA_PROPERTIES_SIZE)
+    return LZMA_RESULT_DATA_ERROR;
+  prop0 = propsData[0];
+  if (prop0 >= (9 * 5 * 5))
+    return LZMA_RESULT_DATA_ERROR;
+  {
+    for (propsRes->pb = 0; prop0 >= (9 * 5); propsRes->pb++, prop0 -= (9 * 5));
+    for (propsRes->lp = 0; prop0 >= 9; propsRes->lp++, prop0 -= 9);
+    propsRes->lc = prop0;
+    /*
+    unsigned char remainder = (unsigned char)(prop0 / 9);
+    propsRes->lc = prop0 % 9;
+    propsRes->pb = remainder / 5;
+    propsRes->lp = remainder % 5;
+    */
+  }
+
+  #ifdef _LZMA_OUT_READ
+  {
+    int i;
+    propsRes->DictionarySize = 0;
+    for (i = 0; i < 4; i++)
+      propsRes->DictionarySize += (UInt32)(propsData[1 + i]) << (i * 8);
+    if (propsRes->DictionarySize == 0)
+      propsRes->DictionarySize = 1;
+  }
+  #endif
+  return LZMA_RESULT_OK;
+}
+#endif
+
+#define kLzmaStreamWasFinishedId (-1)
+
+int LzmaDecode(CLzmaDecoderState *vs,
+    #ifdef _LZMA_IN_CB
+    ILzmaInCallback *InCallback,
+    #else
+    const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed,
+    #endif
+    unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed)
+{
+  CProb *p = vs->Probs;
+  SizeT nowPos = 0;
+  Byte previousByte = 0;
+  UInt32 posStateMask = (1 << (vs->Properties.pb)) - 1;
+  UInt32 literalPosMask = (1 << (vs->Properties.lp)) - 1;
+  int lc = vs->Properties.lc;
+
+  #ifdef _LZMA_OUT_READ
+  
+  UInt32 Range = vs->Range;
+  UInt32 Code = vs->Code;
+  #ifdef _LZMA_IN_CB
+  const Byte *Buffer = vs->Buffer;
+  const Byte *BufferLim = vs->BufferLim;
+  #else
+  const Byte *Buffer = inStream;
+  const Byte *BufferLim = inStream + inSize;
+  #endif
+  int state = vs->State;
+  UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
+  int len = vs->RemainLen;
+  UInt32 globalPos = vs->GlobalPos;
+  UInt32 distanceLimit = vs->DistanceLimit;
+
+  Byte *dictionary = vs->Dictionary;
+  UInt32 dictionarySize = vs->Properties.DictionarySize;
+  UInt32 dictionaryPos = vs->DictionaryPos;
+
+  Byte tempDictionary[4];
+
+  #ifndef _LZMA_IN_CB
+  *inSizeProcessed = 0;
+  #endif
+  *outSizeProcessed = 0;
+  if (len == kLzmaStreamWasFinishedId)
+    return LZMA_RESULT_OK;
+
+  if (dictionarySize == 0)
+  {
+    dictionary = tempDictionary;
+    dictionarySize = 1;
+    tempDictionary[0] = vs->TempDictionary[0];
+  }
+
+  if (len == kLzmaNeedInitId)
+  {
+    {
+      UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp));
+      UInt32 i;
+      for (i = 0; i < numProbs; i++)
+        p[i] = kBitModelTotal >> 1; 
+      rep0 = rep1 = rep2 = rep3 = 1;
+      state = 0;
+      globalPos = 0;
+      distanceLimit = 0;
+      dictionaryPos = 0;
+      dictionary[dictionarySize - 1] = 0;
+      #ifdef _LZMA_IN_CB
+      RC_INIT;
+      #else
+      RC_INIT(inStream, inSize);
+      #endif
+    }
+    len = 0;
+  }
+  while(len != 0 && nowPos < outSize)
+  {
+    UInt32 pos = dictionaryPos - rep0;
+    if (pos >= dictionarySize)
+      pos += dictionarySize;
+    outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
+    if (++dictionaryPos == dictionarySize)
+      dictionaryPos = 0;
+    len--;
+  }
+  if (dictionaryPos == 0)
+    previousByte = dictionary[dictionarySize - 1];
+  else
+    previousByte = dictionary[dictionaryPos - 1];
+
+  #else /* if !_LZMA_OUT_READ */
+
+  int state = 0;
+  UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
+  int len = 0;
+  const Byte *Buffer;
+  const Byte *BufferLim;
+  UInt32 Range;
+  UInt32 Code;
+
+  #ifndef _LZMA_IN_CB
+  *inSizeProcessed = 0;
+  #endif
+  *outSizeProcessed = 0;
+
+  {
+    UInt32 i;
+    UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp));
+    for (i = 0; i < numProbs; i++)
+      p[i] = kBitModelTotal >> 1;
+  }
+  
+  #ifdef _LZMA_IN_CB
+  RC_INIT;
+  #else
+  RC_INIT(inStream, inSize);
+  #endif
+
+  #endif /* _LZMA_OUT_READ */
+
+  while(nowPos < outSize)
+  {
+    CProb *prob;
+    UInt32 bound;
+    int posState = (int)(
+        (nowPos 
+        #ifdef _LZMA_OUT_READ
+        + globalPos
+        #endif
+        )
+        & posStateMask);
+
+    prob = p + IsMatch + (state << kNumPosBitsMax) + posState;
+    IfBit0(prob)
+    {
+      int symbol = 1;
+      UpdateBit0(prob)
+      prob = p + Literal + (LZMA_LIT_SIZE * 
+        (((
+        (nowPos 
+        #ifdef _LZMA_OUT_READ
+        + globalPos
+        #endif
+        )
+        & literalPosMask) << lc) + (previousByte >> (8 - lc))));
+
+      if (state >= kNumLitStates)
+      {
+        int matchByte;
+        #ifdef _LZMA_OUT_READ
+        UInt32 pos = dictionaryPos - rep0;
+        if (pos >= dictionarySize)
+          pos += dictionarySize;
+        matchByte = dictionary[pos];
+        #else
+        matchByte = outStream[nowPos - rep0];
+        #endif
+        do
+        {
+          int bit;
+          CProb *probLit;
+          matchByte <<= 1;
+          bit = (matchByte & 0x100);
+          probLit = prob + 0x100 + bit + symbol;
+          RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break)
+        }
+        while (symbol < 0x100);
+      }
+      while (symbol < 0x100)
+      {
+        CProb *probLit = prob + symbol;
+        RC_GET_BIT(probLit, symbol)
+      }
+      previousByte = (Byte)symbol;
+
+      outStream[nowPos++] = previousByte;
+      #ifdef _LZMA_OUT_READ
+      if (distanceLimit < dictionarySize)
+        distanceLimit++;
+
+      dictionary[dictionaryPos] = previousByte;
+      if (++dictionaryPos == dictionarySize)
+        dictionaryPos = 0;
+      #endif
+      if (state < 4) state = 0;
+      else if (state < 10) state -= 3;
+      else state -= 6;
+    }
+    else             
+    {
+      UpdateBit1(prob);
+      prob = p + IsRep + state;
+      IfBit0(prob)
+      {
+        UpdateBit0(prob);
+        rep3 = rep2;
+        rep2 = rep1;
+        rep1 = rep0;
+        state = state < kNumLitStates ? 0 : 3;
+        prob = p + LenCoder;
+      }
+      else
+      {
+        UpdateBit1(prob);
+        prob = p + IsRepG0 + state;
+        IfBit0(prob)
+        {
+          UpdateBit0(prob);
+          prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState;
+          IfBit0(prob)
+          {
+            #ifdef _LZMA_OUT_READ
+            UInt32 pos;
+            #endif
+            UpdateBit0(prob);
+            
+            #ifdef _LZMA_OUT_READ
+            if (distanceLimit == 0)
+            #else
+            if (nowPos == 0)
+            #endif
+              return LZMA_RESULT_DATA_ERROR;
+            
+            state = state < kNumLitStates ? 9 : 11;
+            #ifdef _LZMA_OUT_READ
+            pos = dictionaryPos - rep0;
+            if (pos >= dictionarySize)
+              pos += dictionarySize;
+            previousByte = dictionary[pos];
+            dictionary[dictionaryPos] = previousByte;
+            if (++dictionaryPos == dictionarySize)
+              dictionaryPos = 0;
+            #else
+            previousByte = outStream[nowPos - rep0];
+            #endif
+            outStream[nowPos++] = previousByte;
+            #ifdef _LZMA_OUT_READ
+            if (distanceLimit < dictionarySize)
+              distanceLimit++;
+            #endif
+
+            continue;
+          }
+          else
+          {
+            UpdateBit1(prob);
+          }
+        }
+        else
+        {
+          UInt32 distance;
+          UpdateBit1(prob);
+          prob = p + IsRepG1 + state;
+          IfBit0(prob)
+          {
+            UpdateBit0(prob);
+            distance = rep1;
+          }
+          else 
+          {
+            UpdateBit1(prob);
+            prob = p + IsRepG2 + state;
+            IfBit0(prob)
+            {
+              UpdateBit0(prob);
+              distance = rep2;
+            }
+            else
+            {
+              UpdateBit1(prob);
+              distance = rep3;
+              rep3 = rep2;
+            }
+            rep2 = rep1;
+          }
+          rep1 = rep0;
+          rep0 = distance;
+        }
+        state = state < kNumLitStates ? 8 : 11;
+        prob = p + RepLenCoder;
+      }
+      {
+        int numBits, offset;
+        CProb *probLen = prob + LenChoice;
+        IfBit0(probLen)
+        {
+          UpdateBit0(probLen);
+          probLen = prob + LenLow + (posState << kLenNumLowBits);
+          offset = 0;
+          numBits = kLenNumLowBits;
+        }
+        else
+        {
+          UpdateBit1(probLen);
+          probLen = prob + LenChoice2;
+          IfBit0(probLen)
+          {
+            UpdateBit0(probLen);
+            probLen = prob + LenMid + (posState << kLenNumMidBits);
+            offset = kLenNumLowSymbols;
+            numBits = kLenNumMidBits;
+          }
+          else
+          {
+            UpdateBit1(probLen);
+            probLen = prob + LenHigh;
+            offset = kLenNumLowSymbols + kLenNumMidSymbols;
+            numBits = kLenNumHighBits;
+          }
+        }
+        RangeDecoderBitTreeDecode(probLen, numBits, len);
+        len += offset;
+      }
+
+      if (state < 4)
+      {
+        int posSlot;
+        state += kNumLitStates;
+        prob = p + PosSlot +
+            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << 
+            kNumPosSlotBits);
+        RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot);
+        if (posSlot >= kStartPosModelIndex)
+        {
+          int numDirectBits = ((posSlot >> 1) - 1);
+          rep0 = (2 | ((UInt32)posSlot & 1));
+          if (posSlot < kEndPosModelIndex)
+          {
+            rep0 <<= numDirectBits;
+            prob = p + SpecPos + rep0 - posSlot - 1;
+          }
+          else
+          {
+            numDirectBits -= kNumAlignBits;
+            do
+            {
+              RC_NORMALIZE
+              Range >>= 1;
+              rep0 <<= 1;
+              if (Code >= Range)
+              {
+                Code -= Range;
+                rep0 |= 1;
+              }
+            }
+            while (--numDirectBits != 0);
+            prob = p + Align;
+            rep0 <<= kNumAlignBits;
+            numDirectBits = kNumAlignBits;
+          }
+          {
+            int i = 1;
+            int mi = 1;
+            do
+            {
+              CProb *prob3 = prob + mi;
+              RC_GET_BIT2(prob3, mi, ; , rep0 |= i);
+              i <<= 1;
+            }
+            while(--numDirectBits != 0);
+          }
+        }
+        else
+          rep0 = posSlot;
+        if (++rep0 == (UInt32)(0))
+        {
+          /* it's for stream version */
+          len = kLzmaStreamWasFinishedId;
+          break;
+        }
+      }
+
+      len += kMatchMinLen;
+      #ifdef _LZMA_OUT_READ
+      if (rep0 > distanceLimit) 
+      #else
+      if (rep0 > nowPos)
+      #endif
+        return LZMA_RESULT_DATA_ERROR;
+
+      #ifdef _LZMA_OUT_READ
+      if (dictionarySize - distanceLimit > (UInt32)len)
+        distanceLimit += len;
+      else
+        distanceLimit = dictionarySize;
+      #endif
+
+      do
+      {
+        #ifdef _LZMA_OUT_READ
+        UInt32 pos = dictionaryPos - rep0;
+        if (pos >= dictionarySize)
+          pos += dictionarySize;
+        previousByte = dictionary[pos];
+        dictionary[dictionaryPos] = previousByte;
+        if (++dictionaryPos == dictionarySize)
+          dictionaryPos = 0;
+        #else
+        previousByte = outStream[nowPos - rep0];
+        #endif
+        len--;
+        outStream[nowPos++] = previousByte;
+      }
+      while(len != 0 && nowPos < outSize);
+    }
+  }
+  RC_NORMALIZE;
+
+  #ifdef _LZMA_OUT_READ
+  vs->Range = Range;
+  vs->Code = Code;
+  vs->DictionaryPos = dictionaryPos;
+  vs->GlobalPos = globalPos + (UInt32)nowPos;
+  vs->DistanceLimit = distanceLimit;
+  vs->Reps[0] = rep0;
+  vs->Reps[1] = rep1;
+  vs->Reps[2] = rep2;
+  vs->Reps[3] = rep3;
+  vs->State = state;
+  vs->RemainLen = len;
+  vs->TempDictionary[0] = tempDictionary[0];
+  #endif
+
+  #ifdef _LZMA_IN_CB
+  vs->Buffer = Buffer;
+  vs->BufferLim = BufferLim;
+  #else
+  *inSizeProcessed = (SizeT)(Buffer - inStream);
+  #endif
+  *outSizeProcessed = nowPos;
+  return LZMA_RESULT_OK;
+}
diff --git a/target/linux/generic/image/lzma-loader/src/LzmaDecode.h b/target/linux/generic/image/lzma-loader/src/LzmaDecode.h
new file mode 100644
index 0000000000..213062af12
--- /dev/null
+++ b/target/linux/generic/image/lzma-loader/src/LzmaDecode.h
@@ -0,0 +1,131 @@
+/* 
+  LzmaDecode.h
+  LZMA Decoder interface
+
+  LZMA SDK 4.21 Copyright (c) 1999-2005 Igor Pavlov (2005-06-08)
+  http://www.7-zip.org/
+
+  LZMA SDK is licensed under two licenses:
+  1) GNU Lesser General Public License (GNU LGPL)
+  2) Common Public License (CPL)
+  It means that you can select one of these two licenses and 
+  follow rules of that license.
+
+  SPECIAL EXCEPTION:
+  Igor Pavlov, as the author of this code, expressly permits you to 
+  statically or dynamically link your code (or bind by name) to the 
+  interfaces of this file without subjecting your linked code to the 
+  terms of the CPL or GNU LGPL. Any modifications or additions 
+  to this file, however, are subject to the LGPL or CPL terms.
+*/
+
+#ifndef __LZMADECODE_H
+#define __LZMADECODE_H
+
+/* #define _LZMA_IN_CB */
+/* Use callback for input data */
+
+/* #define _LZMA_OUT_READ */
+/* Use read function for output data */
+
+/* #define _LZMA_PROB32 */
+/* It can increase speed on some 32-bit CPUs, 
+   but memory usage will be doubled in that case */
+
+/* #define _LZMA_LOC_OPT */
+/* Enable local speed optimizations inside code */
+
+/* #define _LZMA_SYSTEM_SIZE_T */
+/* Use system's size_t. You can use it to enable 64-bit sizes supporting*/
+
+#ifndef UInt32
+#ifdef _LZMA_UINT32_IS_ULONG
+#define UInt32 unsigned long
+#else
+#define UInt32 unsigned int
+#endif
+#endif
+
+#ifndef SizeT
+#ifdef _LZMA_SYSTEM_SIZE_T
+#include <stddef.h>
+#define SizeT size_t
+#else
+#define SizeT UInt32
+#endif
+#endif
+
+#ifdef _LZMA_PROB32
+#define CProb UInt32
+#else
+#define CProb unsigned short
+#endif
+
+#define LZMA_RESULT_OK 0
+#define LZMA_RESULT_DATA_ERROR 1
+
+#ifdef _LZMA_IN_CB
+typedef struct _ILzmaInCallback
+{
+  int (*Read)(void *object, const unsigned char **buffer, SizeT *bufferSize);
+} ILzmaInCallback;
+#endif
+
+#define LZMA_BASE_SIZE 1846
+#define LZMA_LIT_SIZE 768
+
+#define LZMA_PROPERTIES_SIZE 5
+
+typedef struct _CLzmaProperties
+{
+  int lc;
+  int lp;
+  int pb;
+  #ifdef _LZMA_OUT_READ
+  UInt32 DictionarySize;
+  #endif
+}CLzmaProperties;
+
+int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size);
+
+#define LzmaGetNumProbs(Properties) (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((Properties)->lc + (Properties)->lp)))
+
+#define kLzmaNeedInitId (-2)
+
+typedef struct _CLzmaDecoderState
+{
+  CLzmaProperties Properties;
+  CProb *Probs;
+
+  #ifdef _LZMA_IN_CB
+  const unsigned char *Buffer;
+  const unsigned char *BufferLim;
+  #endif
+
+  #ifdef _LZMA_OUT_READ
+  unsigned char *Dictionary;
+  UInt32 Range;
+  UInt32 Code;
+  UInt32 DictionaryPos;
+  UInt32 GlobalPos;
+  UInt32 DistanceLimit;
+  UInt32 Reps[4];
+  int State;
+  int RemainLen;
+  unsigned char TempDictionary[4];
+  #endif
+} CLzmaDecoderState;
+
+#ifdef _LZMA_OUT_READ
+#define LzmaDecoderInit(vs) { (vs)->RemainLen = kLzmaNeedInitId; }
+#endif
+
+int LzmaDecode(CLzmaDecoderState *vs,
+    #ifdef _LZMA_IN_CB
+    ILzmaInCallback *inCallback,
+    #else
+    const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed,
+    #endif
+    unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed);
+
+#endif
diff --git a/target/linux/generic/image/lzma-loader/src/Makefile b/target/linux/generic/image/lzma-loader/src/Makefile
new file mode 100644
index 0000000000..910172c4f8
--- /dev/null
+++ b/target/linux/generic/image/lzma-loader/src/Makefile
@@ -0,0 +1,68 @@
+# 
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+RAMSTART = 0x80000000
+RAMSIZE = 0x00100000		# 1MB
+LOADADDR = 0x80400000		# RAM start + 4M
+KERNEL_ENTRY = 0x80001000
+IMAGE_COPY:=0
+
+CROSS_COMPILE = mips-linux-
+
+OBJCOPY:= $(CROSS_COMPILE)objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S
+CFLAGS := -fno-builtin -Os -G 0 -ffunction-sections -mno-abicalls -fno-pic -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap -Wall -DRAMSTART=${RAMSTART} -DRAMSIZE=${RAMSIZE} -DKERNEL_ENTRY=${KERNEL_ENTRY} -D_LZMA_IN_CB
+ifeq ($(IMAGE_COPY),1)
+CFLAGS += -DLOADADDR=${LOADADDR} -DIMAGE_COPY=1
+endif
+
+.S.s:
+	$(CPP) $(CFLAGS) $< -o $*.s
+.S.o:
+	$(CC) $(CFLAGS) -c $< -o $*.o
+.c.o:
+	$(CC) $(CFLAGS) -c $< -o $*.o
+
+CC =       $(CROSS_COMPILE)gcc
+LD =       $(CROSS_COMPILE)ld
+OBJDUMP =  $(CROSS_COMPILE)objdump
+
+O_FORMAT = $(shell $(OBJDUMP) -i | head -2 | grep elf32)
+
+# Drop some uninteresting sections in the kernel.
+# This is only relevant for ELF kernels but doesn't hurt a.out
+drop-sections   = .reginfo .mdebug .comment
+strip-flags     = $(addprefix --remove-section=,$(drop-sections))
+
+all : lzma.elf lzma.bin
+
+lzma.lds: lzma.lds.in
+	sed -e 's,@LOADADDR@,$(LOADADDR),g' -e 's,@ENTRY@,_start,g' $< >$@
+
+kernel.o: vmlinux.lzma lzma.lds
+	$(LD) -r -b binary --oformat $(O_FORMAT) -o $@ $<
+
+lzma.bin: lzma.elf
+	$(OBJCOPY) $< $@
+
+ifeq ($(IMAGE_COPY),1)
+LOADER_ENTRY ?= $(KERNEL_ENTRY)
+lzma.o: decompress.o LzmaDecode.o kernel.o
+	sed -e 's,@LOADADDR@,$(LOADADDR),g' -e 's,@ENTRY@,entry,g' lzma.lds.in >lzma-stage2.lds
+	$(LD) -static --no-warn-mismatch -e entry -Tlzma-stage2.lds -o temp-$@ $^
+	$(OBJCOPY) temp-$@ lzma.tmp
+	@echo "SECTIONS { .data : { code_start = .; *(.data) code_stop = .; }}" > lzma-data.lds
+	$(LD) -no-warn-mismatch -T lzma-data.lds -r -o $@ -b binary lzma.tmp --oformat $(O_FORMAT)
+	
+lzma.elf: start.o lzma.o
+	sed -e 's,@LOADADDR@,$(LOADER_ENTRY),g' lzma-copy.lds.in >lzma-copy.lds
+	$(LD) -s -Tlzma-copy.lds -o $@ $^
+else
+lzma.elf: start.o decompress.o LzmaDecode.o kernel.o
+	$(LD) -s -Tlzma.lds -o $@ $^
+endif
+
+clean:
+	rm -f *.o lzma.elf lzma.bin *.tmp *.lds
diff --git a/target/linux/generic/image/lzma-loader/src/decompress.c b/target/linux/generic/image/lzma-loader/src/decompress.c
new file mode 100644
index 0000000000..45ac509cdc
--- /dev/null
+++ b/target/linux/generic/image/lzma-loader/src/decompress.c
@@ -0,0 +1,157 @@
+/*
+ * LZMA compressed kernel decompressor for bcm947xx boards
+ *
+ * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * Please note, this was code based on the bunzip2 decompressor code
+ * by Manuel Novoa III  (mjn3@codepoet.org), although the only thing left
+ * is an idea and part of original vendor code
+ *
+ *
+ * 12-Mar-2005  Mineharu Takahara <mtakahar@yahoo.com>
+ *   pass actual output size to decoder (stream mode
+ *   compressed input is not a requirement anymore)
+ *
+ * 24-Apr-2005 Oleg I. Vdovikin
+ *   reordered functions using lds script, removed forward decl
+ *
+ * ??-Nov-2005 Mike Baker
+ *   reorder the script as an lzma wrapper; do not depend on flash access
+ */
+
+#include "LzmaDecode.h"
+
+#define KSEG0			0x80000000
+#define KSEG1			0xa0000000
+
+#define KSEG1ADDR(a)		((((unsigned)(a)) & 0x1fffffffU) | KSEG1)
+
+#define Index_Invalidate_I	0x00
+#define Index_Writeback_Inv_D   0x01
+
+#define cache_unroll(base,op)	\
+	__asm__ __volatile__(		\
+		".set noreorder;\n"		\
+		".set mips3;\n"			\
+		"cache %1, (%0);\n"		\
+		".set mips0;\n"			\
+		".set reorder\n"		\
+		:						\
+		: "r" (base),			\
+		  "i" (op));
+
+
+static __inline__ void blast_icache(unsigned long size, unsigned long lsize)
+{
+	unsigned long start = KSEG0;
+	unsigned long end = (start + size);
+
+	while(start < end) {
+		cache_unroll(start,Index_Invalidate_I);
+		start += lsize;
+	}
+}
+
+static __inline__ void blast_dcache(unsigned long size, unsigned long lsize)
+{
+	unsigned long start = KSEG0;
+	unsigned long end = (start + size);
+
+	while(start < end) {
+		cache_unroll(start,Index_Writeback_Inv_D);
+		start += lsize;
+	}
+}
+
+unsigned char *data;
+
+static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize)
+{
+	*bufferSize = 1;
+	*buffer = data;
+	++data;
+	return LZMA_RESULT_OK;
+}
+
+static __inline__ unsigned char get_byte(void)
+{
+	unsigned char *buffer;
+	UInt32 fake;
+	
+	return read_byte(0, &buffer, &fake), *buffer;
+}
+
+/* This puts lzma workspace 128k below RAM end. 
+ * That should be enough for both lzma and stack
+ */
+static char *buffer = (char *)(RAMSTART + RAMSIZE - 0x00020000);
+extern char lzma_start[];
+extern char lzma_end[];
+
+/* should be the first function */
+void entry(unsigned long icache_size, unsigned long icache_lsize, 
+	unsigned long dcache_size, unsigned long dcache_lsize)
+{
+	unsigned int i;  /* temp value */
+	unsigned int osize; /* uncompressed size */
+	volatile unsigned int arg0, arg1, arg2, arg3;
+
+	/* restore argument registers */
+	__asm__ __volatile__ ("ori %0, $12, 0":"=r"(arg0));
+	__asm__ __volatile__ ("ori %0, $13, 0":"=r"(arg1));
+	__asm__ __volatile__ ("ori %0, $14, 0":"=r"(arg2));
+	__asm__ __volatile__ ("ori %0, $15, 0":"=r"(arg3));
+
+	ILzmaInCallback callback;
+	CLzmaDecoderState vs;
+	callback.Read = read_byte;
+
+	data = lzma_start;
+
+	/* lzma args */
+	i = get_byte();
+	vs.Properties.lc = i % 9, i = i / 9;
+	vs.Properties.lp = i % 5, vs.Properties.pb = i / 5;
+
+	vs.Probs = (CProb *)buffer;
+
+	/* skip rest of the LZMA coder property */
+	for (i = 0; i < 4; i++)
+		get_byte();
+
+	/* read the lower half of uncompressed size in the header */
+	osize = ((unsigned int)get_byte()) +
+		((unsigned int)get_byte() << 8) +
+		((unsigned int)get_byte() << 16) +
+		((unsigned int)get_byte() << 24);
+
+	/* skip rest of the header (upper half of uncompressed size) */
+	for (i = 0; i < 4; i++) 
+		get_byte();
+
+	/* decompress kernel */
+	if ((i = LzmaDecode(&vs, &callback,
+	(unsigned char*)KERNEL_ENTRY, osize, &osize)) == LZMA_RESULT_OK)
+	{
+		blast_dcache(dcache_size, dcache_lsize);
+		blast_icache(icache_size, icache_lsize);
+
+		/* Jump to load address */
+		((void (*)(int a0, int a1, int a2, int a3)) KERNEL_ENTRY)(arg0, arg1, arg2, arg3);
+	}
+}
diff --git a/target/linux/generic/image/lzma-loader/src/lzma-copy.lds.in b/target/linux/generic/image/lzma-loader/src/lzma-copy.lds.in
new file mode 100644
index 0000000000..fbc87ab8e2
--- /dev/null
+++ b/target/linux/generic/image/lzma-loader/src/lzma-copy.lds.in
@@ -0,0 +1,20 @@
+OUTPUT_ARCH(mips)
+ENTRY(_start)
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = @LOADADDR@;
+  .text      :
+  {
+    _ftext = . ;
+    *(.text)
+    *(.rodata)
+  } =0
+
+  .reginfo : { *(.reginfo) }
+
+  .bss       :
+  {
+   *(.bss)
+  }
+}
diff --git a/target/linux/generic/image/lzma-loader/src/lzma.lds.in b/target/linux/generic/image/lzma-loader/src/lzma.lds.in
new file mode 100644
index 0000000000..6021cec014
--- /dev/null
+++ b/target/linux/generic/image/lzma-loader/src/lzma.lds.in
@@ -0,0 +1,24 @@
+OUTPUT_ARCH(mips)
+ENTRY(@ENTRY@)
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = @LOADADDR@;
+  .text      :
+  {
+    _ftext = . ;
+    *(.text.entry)
+    *(.text)
+    *(.rodata)
+    lzma_start = .;
+    kernel.o
+    lzma_end = .;
+  } =0
+
+  .reginfo : { *(.reginfo) }
+
+  .bss       :
+  {
+   *(.bss)
+  }
+}
diff --git a/target/linux/generic/image/lzma-loader/src/print.c b/target/linux/generic/image/lzma-loader/src/print.c
new file mode 100644
index 0000000000..950687beff
--- /dev/null
+++ b/target/linux/generic/image/lzma-loader/src/print.c
@@ -0,0 +1,324 @@
+/*
+ * Copyright (C) 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include	"print.h"
+
+/* macros */
+#define		IsDigit(x)	( ((x) >= '0') && ((x) <= '9') )
+#define		Ctod(x)		( (x) - '0')
+
+/* forward declaration */
+extern int PrintChar(char *, char, int, int);
+extern int PrintString(char *, char *, int, int);
+extern int PrintNum(char *, unsigned long, int, int, int, int, char, int);
+
+/* private variable */
+static const char theFatalMsg[] = "fatal error in lp_Print!";
+
+/* -*-
+ * A low level printf() function.
+ */
+void
+lp_Print(void (*output)(void *, char *, int), 
+	 void * arg,
+	 char *fmt, 
+	 va_list ap)
+{
+
+#define 	OUTPUT(arg, s, l)  \
+  { if (((l) < 0) || ((l) > LP_MAX_BUF)) { \
+       (*output)(arg, (char*)theFatalMsg, sizeof(theFatalMsg)-1); for(;;); \
+    } else { \
+      (*output)(arg, s, l); \
+    } \
+  }
+    
+    char buf[LP_MAX_BUF];
+
+    char c;
+    char *s;
+    long int num;
+
+    int longFlag;
+    int negFlag;
+    int width;
+    int prec;
+    int ladjust;
+    char padc;
+
+    int length;
+
+    for(;;) {
+	{ 
+	    /* scan for the next '%' */
+	    char *fmtStart = fmt;
+	    while ( (*fmt != '\0') && (*fmt != '%')) {
+		fmt ++;
+	    }
+
+	    /* flush the string found so far */
+	    OUTPUT(arg, fmtStart, fmt-fmtStart);
+
+	    /* are we hitting the end? */
+	    if (*fmt == '\0') break;
+	}
+
+	/* we found a '%' */
+	fmt ++;
+	
+	/* check for long */
+	if (*fmt == 'l') {
+	    longFlag = 1;
+	    fmt ++;
+	} else {
+	    longFlag = 0;
+	}
+
+	/* check for other prefixes */
+	width = 0;
+	prec = -1;
+	ladjust = 0;
+	padc = ' ';
+
+	if (*fmt == '-') {
+	    ladjust = 1;
+	    fmt ++;
+	}
+
+	if (*fmt == '0') {
+	    padc = '0';
+	    fmt++;
+	}
+
+	if (IsDigit(*fmt)) {
+	    while (IsDigit(*fmt)) {
+		width = 10 * width + Ctod(*fmt++);
+	    }
+	}
+
+	if (*fmt == '.') {
+	    fmt ++;
+	    if (IsDigit(*fmt)) {
+		prec = 0;
+		while (IsDigit(*fmt)) {
+		    prec = prec*10 + Ctod(*fmt++);
+		}
+	    }
+	}
+
+
+	/* check format flag */
+	negFlag = 0;
+	switch (*fmt) {
+	 case 'b':
+	    if (longFlag) { 
+		num = va_arg(ap, long int); 
+	    } else { 
+		num = va_arg(ap, int);
+	    }
+	    length = PrintNum(buf, num, 2, 0, width, ladjust, padc, 0);
+	    OUTPUT(arg, buf, length);
+	    break;
+
+	 case 'd':
+	 case 'D':
+	    if (longFlag) { 
+		num = va_arg(ap, long int);
+	    } else { 
+		num = va_arg(ap, int); 
+	    }
+	    if (num < 0) {
+		num = - num;
+		negFlag = 1;
+	    }
+	    length = PrintNum(buf, num, 10, negFlag, width, ladjust, padc, 0);
+	    OUTPUT(arg, buf, length);
+	    break;
+
+	 case 'o':
+	 case 'O':
+	    if (longFlag) { 
+		num = va_arg(ap, long int);
+	    } else { 
+		num = va_arg(ap, int); 
+	    }
+	    length = PrintNum(buf, num, 8, 0, width, ladjust, padc, 0);
+	    OUTPUT(arg, buf, length);
+	    break;
+
+	 case 'u':
+	 case 'U':
+	    if (longFlag) { 
+		num = va_arg(ap, long int);
+	    } else { 
+		num = va_arg(ap, int); 
+	    }
+	    length = PrintNum(buf, num, 10, 0, width, ladjust, padc, 0);
+	    OUTPUT(arg, buf, length);
+	    break;
+	    
+	 case 'x':
+	    if (longFlag) { 
+		num = va_arg(ap, long int);
+	    } else { 
+		num = va_arg(ap, int); 
+	    }
+	    length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 0);
+	    OUTPUT(arg, buf, length);
+	    break;
+
+	 case 'X':
+	    if (longFlag) { 
+		num = va_arg(ap, long int);
+	    } else { 
+		num = va_arg(ap, int); 
+	    }
+	    length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 1);
+	    OUTPUT(arg, buf, length);
+	    break;
+
+	 case 'c':
+	    c = (char)va_arg(ap, int);
+	    length = PrintChar(buf, c, width, ladjust);
+	    OUTPUT(arg, buf, length);
+	    break;
+
+	 case 's':
+	    s = (char*)va_arg(ap, char *);
+	    length = PrintString(buf, s, width, ladjust);
+	    OUTPUT(arg, buf, length);
+	    break;
+
+	 case '\0':
+	    fmt --;
+	    break;
+
+	 default:
+	    /* output this char as it is */
+	    OUTPUT(arg, fmt, 1);
+	}	/* switch (*fmt) */
+
+	fmt ++;
+    }		/* for(;;) */
+
+    /* special termination call */
+    OUTPUT(arg, "\0", 1);
+}
+
+
+/* --------------- local help functions --------------------- */
+int
+PrintChar(char * buf, char c, int length, int ladjust)
+{
+    int i;
+    
+    if (length < 1) length = 1;
+    if (ladjust) {
+	*buf = c;
+	for (i=1; i< length; i++) buf[i] = ' ';
+    } else {
+	for (i=0; i< length-1; i++) buf[i] = ' ';
+	buf[length - 1] = c;
+    }
+    return length;
+}
+
+int
+PrintString(char * buf, char* s, int length, int ladjust)
+{
+    int i;
+    int len=0;
+    char* s1 = s;
+    while (*s1++) len++;
+    if (length < len) length = len;
+
+    if (ladjust) {
+	for (i=0; i< len; i++) buf[i] = s[i];
+	for (i=len; i< length; i++) buf[i] = ' ';
+    } else {
+	for (i=0; i< length-len; i++) buf[i] = ' ';
+	for (i=length-len; i < length; i++) buf[i] = s[i-length+len];
+    }
+    return length;
+}
+
+int
+PrintNum(char * buf, unsigned long u, int base, int negFlag, 
+	 int length, int ladjust, char padc, int upcase)
+{
+    /* algorithm :
+     *  1. prints the number from left to right in reverse form.
+     *  2. fill the remaining spaces with padc if length is longer than
+     *     the actual length
+     *     TRICKY : if left adjusted, no "0" padding.
+     *		    if negtive, insert  "0" padding between "0" and number.
+     *  3. if (!ladjust) we reverse the whole string including paddings
+     *  4. otherwise we only reverse the actual string representing the num.
+     */
+
+    int actualLength =0;
+    char *p = buf;
+    int i;
+
+    do {
+	int tmp = u %base;
+	if (tmp <= 9) {
+	    *p++ = '0' + tmp;
+	} else if (upcase) {
+	    *p++ = 'A' + tmp - 10;
+	} else {
+	    *p++ = 'a' + tmp - 10;
+	}
+	u /= base;
+    } while (u != 0);
+
+    if (negFlag) {
+	*p++ = '-';
+    }
+
+    /* figure out actual length and adjust the maximum length */
+    actualLength = p - buf;
+    if (length < actualLength) length = actualLength;
+
+    /* add padding */
+    if (ladjust) {
+	padc = ' ';
+    }
+    if (negFlag && !ladjust && (padc == '0')) {
+	for (i = actualLength-1; i< length-1; i++) buf[i] = padc;
+	buf[length -1] = '-';
+    } else {
+	for (i = actualLength; i< length; i++) buf[i] = padc;
+    }
+	    
+
+    /* prepare to reverse the string */
+    {
+	int begin = 0;
+	int end;
+	if (ladjust) {
+	    end = actualLength - 1;
+	} else {
+	    end = length -1;
+	}
+
+	while (end > begin) {
+	    char tmp = buf[begin];
+	    buf[begin] = buf[end];
+	    buf[end] = tmp;
+	    begin ++;
+	    end --;
+	}
+    }
+
+    /* adjust the string pointer */
+    return length;
+}
diff --git a/target/linux/generic/image/lzma-loader/src/print.h b/target/linux/generic/image/lzma-loader/src/print.h
new file mode 100644
index 0000000000..b051463909
--- /dev/null
+++ b/target/linux/generic/image/lzma-loader/src/print.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef _print_h_
+#define _print_h_
+
+#include <stdarg.h>
+
+/* this is the maximum width for a variable */
+#define		LP_MAX_BUF	80
+
+/* -*-
+ * output function takes an void pointer which is passed in as the
+ * second argument in lp_Print().  This black-box argument gives output
+ * function a way to track state.
+ *
+ * The second argument in output function is a pointer to char buffer.
+ * The third argument specifies the number of chars to outputed.
+ *
+ * output function cannot assume the buffer is null-terminated after
+ * l number of chars.
+ */
+void lp_Print(void (*output)(void *, char *, int), 
+	      void * arg,
+	      char *fmt, 
+	      va_list ap);
+
+#endif
diff --git a/target/linux/generic/image/lzma-loader/src/printf.c b/target/linux/generic/image/lzma-loader/src/printf.c
new file mode 100644
index 0000000000..49bd50d7c7
--- /dev/null
+++ b/target/linux/generic/image/lzma-loader/src/printf.c
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include "printf.h"
+#include "print.h"
+#include "uart16550.h"
+
+static void myoutput(void *arg, char *s, int l)
+{
+    int i;
+
+    // special termination call
+    if ((l==1) && (s[0] == '\0')) return;
+    
+    for (i=0; i< l; i++) {
+	Uart16550Put(s[i]);
+	if (s[i] == '\n') Uart16550Put('\r');
+    }
+}
+
+void printf(char *fmt, ...)
+{
+    va_list ap;
+    va_start(ap, fmt);
+    lp_Print(myoutput, 0, fmt, ap);
+    va_end(ap);
+}
diff --git a/target/linux/generic/image/lzma-loader/src/printf.h b/target/linux/generic/image/lzma-loader/src/printf.h
new file mode 100644
index 0000000000..9b1c1df232
--- /dev/null
+++ b/target/linux/generic/image/lzma-loader/src/printf.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef _printf_h_
+#define _printf_h_
+
+#include <stdarg.h>
+void printf(char *fmt, ...);
+
+#endif /* _printf_h_ */
diff --git a/target/linux/generic/image/lzma-loader/src/start.S b/target/linux/generic/image/lzma-loader/src/start.S
new file mode 100644
index 0000000000..864293379f
--- /dev/null
+++ b/target/linux/generic/image/lzma-loader/src/start.S
@@ -0,0 +1,160 @@
+#include <asm/asm.h>
+#include <asm/regdef.h>
+
+#define KSEG0		0x80000000
+
+#define C0_CONFIG	$16
+#define C0_TAGLO	$28
+#define C0_TAGHI	$29
+
+#define	CONF1_DA_SHIFT	7			/* D$ associativity */
+#define CONF1_DA_MASK	0x00000380
+#define CONF1_DA_BASE	1
+#define CONF1_DL_SHIFT	10			/* D$ line size */
+#define CONF1_DL_MASK	0x00001c00
+#define CONF1_DL_BASE	2
+#define CONF1_DS_SHIFT	13			/* D$ sets/way */
+#define CONF1_DS_MASK	0x0000e000
+#define CONF1_DS_BASE	64
+#define CONF1_IA_SHIFT	16			/* I$ associativity */
+#define CONF1_IA_MASK	0x00070000
+#define CONF1_IA_BASE	1
+#define CONF1_IL_SHIFT	19			/* I$ line size */
+#define CONF1_IL_MASK	0x00380000
+#define CONF1_IL_BASE	2
+#define CONF1_IS_SHIFT	22			/* Instruction cache sets/way */
+#define CONF1_IS_MASK	0x01c00000
+#define CONF1_IS_BASE	64
+
+#define Index_Invalidate_I	0x00
+#define Index_Writeback_Inv_D   0x01
+
+LEAF(_start)
+	
+	.set	mips32
+	.set noreorder
+
+	/* save argument registers */
+	move t4, a0
+	move t5, a1
+	move t6, a2
+	move t7, a3
+	
+	/* set up stack */
+	li	sp, RAMSTART + RAMSIZE - 16
+
+#ifdef IMAGE_COPY
+	/* Copy decompressor code to the right place */
+	li  t2, LOADADDR
+	add a0, t2, 0
+	la  a1, code_start
+	la  a2, code_stop
+$L1:
+	lw  t0, 0(a1)
+	sw  t0, 0(a0)
+	add a1, 4
+	add a0, 4
+	blt a1, a2, $L1
+	nop
+#endif
+
+	/* At this point we need to invalidate dcache and */
+	/* icache before jumping to new code */
+
+1:	/* Get cache sizes */
+	mfc0	s0,C0_CONFIG,1
+
+	li	s1,CONF1_DL_MASK
+	and	s1,s0
+	beq	s1,zero,nodc
+	nop
+
+	srl	s1,CONF1_DL_SHIFT
+	li	t0,CONF1_DL_BASE
+	sll	s1,t0,s1		/* s1 has D$ cache line size */
+
+	li	s2,CONF1_DA_MASK
+	and	s2,s0
+	srl	s2,CONF1_DA_SHIFT
+	addiu	s2,CONF1_DA_BASE	/* s2 now has D$ associativity */
+
+	li	t0,CONF1_DS_MASK
+	and	t0,s0
+	srl	t0,CONF1_DS_SHIFT
+	li	s3,CONF1_DS_BASE
+	sll	s3,s3,t0		/* s3 has D$ sets per way */
+
+	multu	s2,s3			/* sets/way * associativity */
+	mflo	t0			/* total cache lines */
+
+	multu	s1,t0			/* D$ linesize * lines */
+	mflo	s2			/* s2 is now D$ size in bytes */
+
+	/* Initilize the D$: */
+	mtc0	zero,C0_TAGLO
+	mtc0	zero,C0_TAGHI
+
+	li	t0,KSEG0		/* Just an address for the first $ line */
+	addu	t1,t0,s2		/*  + size of cache == end */
+
+1:	cache	Index_Writeback_Inv_D,0(t0)
+	bne	t0,t1,1b
+	addu	t0,s1
+	
+nodc:
+	/* Now we get to do it all again for the I$ */
+	
+	move	s3,zero			/* just in case there is no icache */
+	move	s4,zero
+
+	li	t0,CONF1_IL_MASK
+	and	t0,s0
+	beq	t0,zero,noic
+	nop
+
+	srl	t0,CONF1_IL_SHIFT
+	li	s3,CONF1_IL_BASE
+	sll	s3,t0			/* s3 has I$ cache line size */
+
+	li	t0,CONF1_IA_MASK
+	and	t0,s0
+	srl	t0,CONF1_IA_SHIFT
+	addiu	s4,t0,CONF1_IA_BASE	/* s4 now has I$ associativity */
+
+	li	t0,CONF1_IS_MASK
+	and	t0,s0
+	srl	t0,CONF1_IS_SHIFT
+	li	s5,CONF1_IS_BASE
+	sll	s5,t0			/* s5 has I$ sets per way */
+
+	multu	s4,s5			/* sets/way * associativity */
+	mflo	t0			/* s4 is now total cache lines */
+
+	multu	s3,t0			/* I$ linesize * lines */
+	mflo	s4			/* s4 is cache size in bytes */
+
+	/* Initilize the I$: */
+	mtc0	zero,C0_TAGLO
+	mtc0	zero,C0_TAGHI
+
+	li	t0,KSEG0		/* Just an address for the first $ line */
+	addu	t1,t0,s4		/*  + size of cache == end */
+
+1:	cache	Index_Invalidate_I,0(t0)
+	bne	t0,t1,1b
+	addu	t0,s3
+noic:
+	/* jump to main */
+	move    a0,s3                   /* icache line size */
+	move    a1,s4                   /* icache size */
+	move    a2,s1                   /* dcache line size */
+#ifdef IMAGE_COPY
+	jal		t2
+#else
+	jal     entry
+#endif
+	move    a3,s2                   /* dcache size */
+
+	.set reorder
+END(_start)
+
diff --git a/target/linux/generic/image/lzma-loader/src/uart16550.c b/target/linux/generic/image/lzma-loader/src/uart16550.c
new file mode 100644
index 0000000000..7df5727600
--- /dev/null
+++ b/target/linux/generic/image/lzma-loader/src/uart16550.c
@@ -0,0 +1,86 @@
+/*
+ * Copyright (C) 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+
+#include "uart16550.h"
+
+/* === CONFIG === */
+
+#define         BASE                    0xb8058000
+#define         MAX_BAUD                1152000
+#define         REG_OFFSET              4
+
+/* === END OF CONFIG === */
+
+/* register offset */
+#define         OFS_RCV_BUFFER          (0*REG_OFFSET)
+#define         OFS_TRANS_HOLD          (0*REG_OFFSET)
+#define         OFS_SEND_BUFFER         (0*REG_OFFSET)
+#define         OFS_INTR_ENABLE         (1*REG_OFFSET)
+#define         OFS_INTR_ID             (2*REG_OFFSET)
+#define         OFS_DATA_FORMAT         (3*REG_OFFSET)
+#define         OFS_LINE_CONTROL        (3*REG_OFFSET)
+#define         OFS_MODEM_CONTROL       (4*REG_OFFSET)
+#define         OFS_RS232_OUTPUT        (4*REG_OFFSET)
+#define         OFS_LINE_STATUS         (5*REG_OFFSET)
+#define         OFS_MODEM_STATUS        (6*REG_OFFSET)
+#define         OFS_RS232_INPUT         (6*REG_OFFSET)
+#define         OFS_SCRATCH_PAD         (7*REG_OFFSET)
+
+#define         OFS_DIVISOR_LSB         (0*REG_OFFSET)
+#define         OFS_DIVISOR_MSB         (1*REG_OFFSET)
+
+
+/* memory-mapped read/write of the port */
+#define         UART16550_READ(y)    (*((volatile uint32*)(BASE + y)))
+#define         UART16550_WRITE(y, z)  ((*((volatile uint32*)(BASE + y))) = z)
+
+#define DEBUG_LED (*(unsigned short*)0xb7ffffc0)
+#define OutputLED(x)  (DEBUG_LED = x)
+
+void Uart16550Init(uint32 baud, uint8 data, uint8 parity, uint8 stop)
+{
+    /* disable interrupts */
+    UART16550_WRITE(OFS_INTR_ENABLE, 0);
+
+    /* set up buad rate */
+    { 
+        uint32 divisor;
+       
+        /* set DIAB bit */
+        UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
+        
+        /* set divisor */
+        divisor = MAX_BAUD / baud;
+        UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
+        UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00)>>8);
+
+        /* clear DIAB bit */
+        UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
+    }
+
+    /* set data format */
+    UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
+}
+
+uint8 Uart16550GetPoll()
+{
+    while((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
+    return UART16550_READ(OFS_RCV_BUFFER);
+}
+
+
+void Uart16550Put(uint8 byte)
+{
+    while ((UART16550_READ(OFS_LINE_STATUS) &0x20) == 0);
+    UART16550_WRITE(OFS_SEND_BUFFER, byte);
+}
+
diff --git a/target/linux/generic/image/lzma-loader/src/uart16550.h b/target/linux/generic/image/lzma-loader/src/uart16550.h
new file mode 100644
index 0000000000..b3fd6fdd75
--- /dev/null
+++ b/target/linux/generic/image/lzma-loader/src/uart16550.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef _uart16550_h_
+#define _uart16550_h_
+
+typedef         unsigned char uint8;
+typedef         unsigned int  uint32;
+
+#define         UART16550_BAUD_2400             2400
+#define         UART16550_BAUD_4800             4800
+#define         UART16550_BAUD_9600             9600
+#define         UART16550_BAUD_19200            19200
+#define         UART16550_BAUD_38400            38400
+#define         UART16550_BAUD_57600            57600
+#define         UART16550_BAUD_115200           115200
+
+#define         UART16550_PARITY_NONE           0
+#define         UART16550_PARITY_ODD            0x08
+#define         UART16550_PARITY_EVEN           0x18
+#define         UART16550_PARITY_MARK           0x28
+#define         UART16550_PARITY_SPACE          0x38
+
+#define         UART16550_DATA_5BIT             0x0
+#define         UART16550_DATA_6BIT             0x1
+#define         UART16550_DATA_7BIT             0x2
+#define         UART16550_DATA_8BIT             0x3
+
+#define         UART16550_STOP_1BIT             0x0
+#define         UART16550_STOP_2BIT             0x4
+
+void Uart16550Init(uint32 baud, uint8 data, uint8 parity, uint8 stop);
+
+/* blocking call */
+uint8 Uart16550GetPoll();
+
+void Uart16550Put(uint8 byte);
+
+#endif
diff --git a/target/linux/generic/patches-2.6.25/001-squashfs.patch b/target/linux/generic/patches-2.6.25/001-squashfs.patch
new file mode 100644
index 0000000000..b2be83183a
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/001-squashfs.patch
@@ -0,0 +1,4170 @@
+--- a/fs/Kconfig
++++ b/fs/Kconfig
+@@ -1367,6 +1367,71 @@ config CRAMFS
+ 
+ 	  If unsure, say N.
+ 
++config SQUASHFS
++	tristate "SquashFS 3.0 - Squashed file system support"
++	select ZLIB_INFLATE
++	help
++	  Saying Y here includes support for SquashFS 3.0 (a Compressed Read-Only File
++	  System).  Squashfs is a highly compressed read-only filesystem for Linux.
++	  It uses zlib compression to compress both files, inodes and directories.
++	  Inodes in the system are very small and all blocks are packed to minimise
++	  data overhead. Block sizes greater than 4K are supported up to a maximum of 64K.
++	  SquashFS 3.0 supports 64 bit filesystems and files (larger than 4GB), full
++	  uid/gid information, hard links and timestamps.
++
++	  Squashfs is intended for general read-only filesystem use, for archival
++	  use (i.e. in cases where a .tar.gz file may be used), and in embedded
++	  systems where low overhead is needed.  Further information and filesystem tools
++	  are available from http://squashfs.sourceforge.net.
++
++	  If you want to compile this as a module ( = code which can be
++	  inserted in and removed from the running kernel whenever you want),
++	  say M here and read <file:Documentation/modules.txt>.  The module
++	  will be called squashfs.  Note that the root file system (the one
++	  containing the directory /) cannot be compiled as a module.
++
++	  If unsure, say N.
++
++config SQUASHFS_EMBEDDED
++
++	bool "Additional options for memory-constrained systems"
++	depends on SQUASHFS
++	default n
++	help
++	  Saying Y here allows you to specify cache sizes and how Squashfs
++	  allocates memory.  This is only intended for memory constrained
++	  systems.
++
++	  If unsure, say N.
++
++config SQUASHFS_FRAGMENT_CACHE_SIZE
++	int "Number of fragments cached" if SQUASHFS_EMBEDDED
++	depends on SQUASHFS
++	default "3"
++	help
++	  By default SquashFS caches the last 3 fragments read from
++	  the filesystem.  Increasing this amount may mean SquashFS
++	  has to re-read fragments less often from disk, at the expense
++	  of extra system memory.  Decreasing this amount will mean
++	  SquashFS uses less memory at the expense of extra reads from disk.
++
++	  Note there must be at least one cached fragment.  Anything
++	  much more than three will probably not make much difference.
++
++config SQUASHFS_VMALLOC
++	bool "Use Vmalloc rather than Kmalloc" if SQUASHFS_EMBEDDED
++	depends on SQUASHFS
++	default n
++	help
++	  By default SquashFS uses kmalloc to obtain fragment cache memory.
++	  Kmalloc memory is the standard kernel allocator, but it can fail
++	  on memory constrained systems.  Because of the way Vmalloc works,
++	  Vmalloc can succeed when kmalloc fails.  Specifying this option
++	  will make SquashFS always use Vmalloc to allocate the
++	  fragment cache memory.
++
++	  If unsure, say N.
++
+ config VXFS_FS
+ 	tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)"
+ 	depends on BLOCK
+--- a/fs/Makefile
++++ b/fs/Makefile
+@@ -73,6 +73,7 @@ obj-$(CONFIG_JBD)		+= jbd/
+ obj-$(CONFIG_JBD2)		+= jbd2/
+ obj-$(CONFIG_EXT2_FS)		+= ext2/
+ obj-$(CONFIG_CRAMFS)		+= cramfs/
++obj-$(CONFIG_SQUASHFS)		+= squashfs/
+ obj-y				+= ramfs/
+ obj-$(CONFIG_HUGETLBFS)		+= hugetlbfs/
+ obj-$(CONFIG_CODA_FS)		+= coda/
+--- /dev/null
++++ b/fs/squashfs/inode.c
+@@ -0,0 +1,2122 @@
++/*
++ * Squashfs - a compressed read only filesystem for Linux
++ *
++ * Copyright (c) 2002, 2003, 2004, 2005, 2006
++ * Phillip Lougher <phillip@lougher.org.uk>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2,
++ * or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * inode.c
++ */
++
++#include <linux/types.h>
++#include <linux/squashfs_fs.h>
++#include <linux/module.h>
++#include <linux/errno.h>
++#include <linux/slab.h>
++#include <linux/fs.h>
++#include <linux/smp_lock.h>
++#include <linux/slab.h>
++#include <linux/squashfs_fs_sb.h>
++#include <linux/squashfs_fs_i.h>
++#include <linux/buffer_head.h>
++#include <linux/vfs.h>
++#include <linux/init.h>
++#include <linux/dcache.h>
++#include <linux/wait.h>
++#include <linux/zlib.h>
++#include <linux/blkdev.h>
++#include <linux/vmalloc.h>
++#include <asm/uaccess.h>
++#include <asm/semaphore.h>
++
++#include "squashfs.h"
++
++static void squashfs_put_super(struct super_block *);
++static int squashfs_statfs(struct dentry *, struct kstatfs *);
++static int squashfs_symlink_readpage(struct file *file, struct page *page);
++static int squashfs_readpage(struct file *file, struct page *page);
++static int squashfs_readpage4K(struct file *file, struct page *page);
++static int squashfs_readdir(struct file *, void *, filldir_t);
++static struct inode *squashfs_alloc_inode(struct super_block *sb);
++static void squashfs_destroy_inode(struct inode *inode);
++static int init_inodecache(void);
++static void destroy_inodecache(void);
++static struct dentry *squashfs_lookup(struct inode *, struct dentry *,
++				struct nameidata *);
++static struct inode *squashfs_iget(struct super_block *s, squashfs_inode_t inode);
++static long long read_blocklist(struct inode *inode, int index,
++				int readahead_blks, char *block_list,
++				unsigned short **block_p, unsigned int *bsize);
++static int squashfs_get_sb(struct file_system_type *, int,
++			const char *, void *, struct vfsmount *);
++
++
++static z_stream stream;
++
++static struct file_system_type squashfs_fs_type = {
++	.owner = THIS_MODULE,
++	.name = "squashfs",
++	.get_sb = squashfs_get_sb,
++	.kill_sb = kill_block_super,
++	.fs_flags = FS_REQUIRES_DEV
++};
++
++static unsigned char squashfs_filetype_table[] = {
++	DT_UNKNOWN, DT_DIR, DT_REG, DT_LNK, DT_BLK, DT_CHR, DT_FIFO, DT_SOCK
++};
++
++static struct super_operations squashfs_ops = {
++	.alloc_inode = squashfs_alloc_inode,
++	.destroy_inode = squashfs_destroy_inode,
++	.statfs = squashfs_statfs,
++	.put_super = squashfs_put_super,
++};
++
++SQSH_EXTERN struct address_space_operations squashfs_symlink_aops = {
++	.readpage = squashfs_symlink_readpage
++};
++
++SQSH_EXTERN struct address_space_operations squashfs_aops = {
++	.readpage = squashfs_readpage
++};
++
++SQSH_EXTERN struct address_space_operations squashfs_aops_4K = {
++	.readpage = squashfs_readpage4K
++};
++
++static struct file_operations squashfs_dir_ops = {
++	.read = generic_read_dir,
++	.readdir = squashfs_readdir
++};
++
++SQSH_EXTERN struct inode_operations squashfs_dir_inode_ops = {
++	.lookup = squashfs_lookup
++};
++
++
++static struct buffer_head *get_block_length(struct super_block *s,
++				int *cur_index, int *offset, int *c_byte)
++{
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	unsigned short temp;
++	struct buffer_head *bh;
++
++	if (!(bh = sb_bread(s, *cur_index)))
++		goto out;
++
++	if (msblk->devblksize - *offset == 1) {
++		if (msblk->swap)
++			((unsigned char *) &temp)[1] = *((unsigned char *)
++				(bh->b_data + *offset));
++		else
++			((unsigned char *) &temp)[0] = *((unsigned char *)
++				(bh->b_data + *offset));
++		brelse(bh);
++		if (!(bh = sb_bread(s, ++(*cur_index))))
++			goto out;
++		if (msblk->swap)
++			((unsigned char *) &temp)[0] = *((unsigned char *)
++				bh->b_data);
++		else
++			((unsigned char *) &temp)[1] = *((unsigned char *)
++				bh->b_data);
++		*c_byte = temp;
++		*offset = 1;
++	} else {
++		if (msblk->swap) {
++			((unsigned char *) &temp)[1] = *((unsigned char *)
++				(bh->b_data + *offset));
++			((unsigned char *) &temp)[0] = *((unsigned char *)
++				(bh->b_data + *offset + 1));
++		} else {
++			((unsigned char *) &temp)[0] = *((unsigned char *)
++				(bh->b_data + *offset));
++			((unsigned char *) &temp)[1] = *((unsigned char *)
++				(bh->b_data + *offset + 1));
++		}
++		*c_byte = temp;
++		*offset += 2;
++	}
++
++	if (SQUASHFS_CHECK_DATA(msblk->sblk.flags)) {
++		if (*offset == msblk->devblksize) {
++			brelse(bh);
++			if (!(bh = sb_bread(s, ++(*cur_index))))
++				goto out;
++			*offset = 0;
++		}
++		if (*((unsigned char *) (bh->b_data + *offset)) !=
++						SQUASHFS_MARKER_BYTE) {
++			ERROR("Metadata block marker corrupt @ %x\n",
++						*cur_index);
++			brelse(bh);
++			goto out;
++		}
++		(*offset)++;
++	}
++	return bh;
++
++out:
++	return NULL;
++}
++
++
++SQSH_EXTERN unsigned int squashfs_read_data(struct super_block *s, char *buffer,
++			long long index, unsigned int length,
++			long long *next_index)
++{
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	struct buffer_head *bh[((SQUASHFS_FILE_MAX_SIZE - 1) >>
++			msblk->devblksize_log2) + 2];
++	unsigned int offset = index & ((1 << msblk->devblksize_log2) - 1);
++	unsigned int cur_index = index >> msblk->devblksize_log2;
++	int bytes, avail_bytes, b = 0, k;
++	char *c_buffer;
++	unsigned int compressed;
++	unsigned int c_byte = length;
++
++	if (c_byte) {
++		bytes = msblk->devblksize - offset;
++		compressed = SQUASHFS_COMPRESSED_BLOCK(c_byte);
++		c_buffer = compressed ? msblk->read_data : buffer;
++		c_byte = SQUASHFS_COMPRESSED_SIZE_BLOCK(c_byte);
++
++		TRACE("Block @ 0x%llx, %scompressed size %d\n", index, compressed
++					? "" : "un", (unsigned int) c_byte);
++
++		if (!(bh[0] = sb_getblk(s, cur_index)))
++			goto block_release;
++
++		for (b = 1; bytes < c_byte; b++) {
++			if (!(bh[b] = sb_getblk(s, ++cur_index)))
++				goto block_release;
++			bytes += msblk->devblksize;
++		}
++		ll_rw_block(READ, b, bh);
++	} else {
++		if (!(bh[0] = get_block_length(s, &cur_index, &offset,
++								&c_byte)))
++			goto read_failure;
++
++		bytes = msblk->devblksize - offset;
++		compressed = SQUASHFS_COMPRESSED(c_byte);
++		c_buffer = compressed ? msblk->read_data : buffer;
++		c_byte = SQUASHFS_COMPRESSED_SIZE(c_byte);
++
++		TRACE("Block @ 0x%llx, %scompressed size %d\n", index, compressed
++					? "" : "un", (unsigned int) c_byte);
++
++		for (b = 1; bytes < c_byte; b++) {
++			if (!(bh[b] = sb_getblk(s, ++cur_index)))
++				goto block_release;
++			bytes += msblk->devblksize;
++		}
++		ll_rw_block(READ, b - 1, bh + 1);
++	}
++
++	if (compressed)
++		down(&msblk->read_data_mutex);
++
++	for (bytes = 0, k = 0; k < b; k++) {
++		avail_bytes = (c_byte - bytes) > (msblk->devblksize - offset) ?
++					msblk->devblksize - offset :
++					c_byte - bytes;
++		wait_on_buffer(bh[k]);
++		if (!buffer_uptodate(bh[k]))
++			goto block_release;
++		memcpy(c_buffer + bytes, bh[k]->b_data + offset, avail_bytes);
++		bytes += avail_bytes;
++		offset = 0;
++		brelse(bh[k]);
++	}
++
++	/*
++	 * uncompress block
++	 */
++	if (compressed) {
++		int zlib_err;
++
++		stream.next_in = c_buffer;
++		stream.avail_in = c_byte;
++		stream.next_out = buffer;
++		stream.avail_out = msblk->read_size;
++
++		if (((zlib_err = zlib_inflateInit(&stream)) != Z_OK) ||
++				((zlib_err = zlib_inflate(&stream, Z_FINISH))
++				 != Z_STREAM_END) || ((zlib_err =
++				zlib_inflateEnd(&stream)) != Z_OK)) {
++			ERROR("zlib_fs returned unexpected result 0x%x\n",
++				zlib_err);
++			bytes = 0;
++		} else
++			bytes = stream.total_out;
++
++		up(&msblk->read_data_mutex);
++	}
++
++	if (next_index)
++		*next_index = index + c_byte + (length ? 0 :
++				(SQUASHFS_CHECK_DATA(msblk->sblk.flags)
++				 ? 3 : 2));
++	return bytes;
++
++block_release:
++	while (--b >= 0)
++		brelse(bh[b]);
++
++read_failure:
++	ERROR("sb_bread failed reading block 0x%x\n", cur_index);
++	return 0;
++}
++
++
++SQSH_EXTERN int squashfs_get_cached_block(struct super_block *s, char *buffer,
++				long long block, unsigned int offset,
++				int length, long long *next_block,
++				unsigned int *next_offset)
++{
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	int n, i, bytes, return_length = length;
++	long long next_index;
++
++	TRACE("Entered squashfs_get_cached_block [%llx:%x]\n", block, offset);
++
++	while ( 1 ) {
++		for (i = 0; i < SQUASHFS_CACHED_BLKS; i++)
++			if (msblk->block_cache[i].block == block)
++				break;
++
++		down(&msblk->block_cache_mutex);
++
++		if (i == SQUASHFS_CACHED_BLKS) {
++			/* read inode header block */
++			for (i = msblk->next_cache, n = SQUASHFS_CACHED_BLKS;
++					n ; n --, i = (i + 1) %
++					SQUASHFS_CACHED_BLKS)
++				if (msblk->block_cache[i].block !=
++							SQUASHFS_USED_BLK)
++					break;
++
++			if (n == 0) {
++				wait_queue_t wait;
++
++				init_waitqueue_entry(&wait, current);
++				add_wait_queue(&msblk->waitq, &wait);
++				set_current_state(TASK_UNINTERRUPTIBLE);
++ 				up(&msblk->block_cache_mutex);
++				schedule();
++				set_current_state(TASK_RUNNING);
++				remove_wait_queue(&msblk->waitq, &wait);
++				continue;
++			}
++			msblk->next_cache = (i + 1) % SQUASHFS_CACHED_BLKS;
++
++			if (msblk->block_cache[i].block ==
++							SQUASHFS_INVALID_BLK) {
++				if (!(msblk->block_cache[i].data =
++						kmalloc(SQUASHFS_METADATA_SIZE,
++						GFP_KERNEL))) {
++					ERROR("Failed to allocate cache"
++							"block\n");
++					up(&msblk->block_cache_mutex);
++					goto out;
++				}
++			}
++
++			msblk->block_cache[i].block = SQUASHFS_USED_BLK;
++			up(&msblk->block_cache_mutex);
++
++			if (!(msblk->block_cache[i].length =
++						squashfs_read_data(s,
++						msblk->block_cache[i].data,
++						block, 0, &next_index))) {
++				ERROR("Unable to read cache block [%llx:%x]\n",
++						block, offset);
++				goto out;
++			}
++
++			down(&msblk->block_cache_mutex);
++			wake_up(&msblk->waitq);
++			msblk->block_cache[i].block = block;
++			msblk->block_cache[i].next_index = next_index;
++			TRACE("Read cache block [%llx:%x]\n", block, offset);
++		}
++
++		if (msblk->block_cache[i].block != block) {
++			up(&msblk->block_cache_mutex);
++			continue;
++		}
++
++		if ((bytes = msblk->block_cache[i].length - offset) >= length) {
++			if (buffer)
++				memcpy(buffer, msblk->block_cache[i].data +
++						offset, length);
++			if (msblk->block_cache[i].length - offset == length) {
++				*next_block = msblk->block_cache[i].next_index;
++				*next_offset = 0;
++			} else {
++				*next_block = block;
++				*next_offset = offset + length;
++			}
++			up(&msblk->block_cache_mutex);
++			goto finish;
++		} else {
++			if (buffer) {
++				memcpy(buffer, msblk->block_cache[i].data +
++						offset, bytes);
++				buffer += bytes;
++			}
++			block = msblk->block_cache[i].next_index;
++			up(&msblk->block_cache_mutex);
++			length -= bytes;
++			offset = 0;
++		}
++	}
++
++finish:
++	return return_length;
++out:
++	return 0;
++}
++
++
++static int get_fragment_location(struct super_block *s, unsigned int fragment,
++				long long *fragment_start_block,
++				unsigned int *fragment_size)
++{
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	long long start_block =
++		msblk->fragment_index[SQUASHFS_FRAGMENT_INDEX(fragment)];
++	int offset = SQUASHFS_FRAGMENT_INDEX_OFFSET(fragment);
++	struct squashfs_fragment_entry fragment_entry;
++
++	if (msblk->swap) {
++		struct squashfs_fragment_entry sfragment_entry;
++
++		if (!squashfs_get_cached_block(s, (char *) &sfragment_entry,
++					start_block, offset,
++					sizeof(sfragment_entry), &start_block,
++					&offset))
++			goto out;
++		SQUASHFS_SWAP_FRAGMENT_ENTRY(&fragment_entry, &sfragment_entry);
++	} else
++		if (!squashfs_get_cached_block(s, (char *) &fragment_entry,
++					start_block, offset,
++					sizeof(fragment_entry), &start_block,
++					&offset))
++			goto out;
++
++	*fragment_start_block = fragment_entry.start_block;
++	*fragment_size = fragment_entry.size;
++
++	return 1;
++
++out:
++	return 0;
++}
++
++
++SQSH_EXTERN void release_cached_fragment(struct squashfs_sb_info *msblk, struct
++					squashfs_fragment_cache *fragment)
++{
++	down(&msblk->fragment_mutex);
++	fragment->locked --;
++	wake_up(&msblk->fragment_wait_queue);
++	up(&msblk->fragment_mutex);
++}
++
++
++SQSH_EXTERN struct squashfs_fragment_cache *get_cached_fragment(struct super_block
++					*s, long long start_block,
++					int length)
++{
++	int i, n;
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++
++	while ( 1 ) {
++		down(&msblk->fragment_mutex);
++
++		for (i = 0; i < SQUASHFS_CACHED_FRAGMENTS &&
++				msblk->fragment[i].block != start_block; i++);
++
++		if (i == SQUASHFS_CACHED_FRAGMENTS) {
++			for (i = msblk->next_fragment, n =
++				SQUASHFS_CACHED_FRAGMENTS; n &&
++				msblk->fragment[i].locked; n--, i = (i + 1) %
++				SQUASHFS_CACHED_FRAGMENTS);
++
++			if (n == 0) {
++				wait_queue_t wait;
++
++				init_waitqueue_entry(&wait, current);
++				add_wait_queue(&msblk->fragment_wait_queue,
++									&wait);
++				set_current_state(TASK_UNINTERRUPTIBLE);
++				up(&msblk->fragment_mutex);
++				schedule();
++				set_current_state(TASK_RUNNING);
++				remove_wait_queue(&msblk->fragment_wait_queue,
++									&wait);
++				continue;
++			}
++			msblk->next_fragment = (msblk->next_fragment + 1) %
++				SQUASHFS_CACHED_FRAGMENTS;
++
++			if (msblk->fragment[i].data == NULL)
++				if (!(msblk->fragment[i].data = SQUASHFS_ALLOC
++						(SQUASHFS_FILE_MAX_SIZE))) {
++					ERROR("Failed to allocate fragment "
++							"cache block\n");
++					up(&msblk->fragment_mutex);
++					goto out;
++				}
++
++			msblk->fragment[i].block = SQUASHFS_INVALID_BLK;
++			msblk->fragment[i].locked = 1;
++			up(&msblk->fragment_mutex);
++
++			if (!(msblk->fragment[i].length = squashfs_read_data(s,
++						msblk->fragment[i].data,
++						start_block, length, NULL))) {
++				ERROR("Unable to read fragment cache block "
++							"[%llx]\n", start_block);
++				msblk->fragment[i].locked = 0;
++				goto out;
++			}
++
++			msblk->fragment[i].block = start_block;
++			TRACE("New fragment %d, start block %lld, locked %d\n",
++						i, msblk->fragment[i].block,
++						msblk->fragment[i].locked);
++			break;
++		}
++
++		msblk->fragment[i].locked++;
++		up(&msblk->fragment_mutex);
++		TRACE("Got fragment %d, start block %lld, locked %d\n", i,
++						msblk->fragment[i].block,
++						msblk->fragment[i].locked);
++		break;
++	}
++
++	return &msblk->fragment[i];
++
++out:
++	return NULL;
++}
++
++
++static struct inode *squashfs_new_inode(struct super_block *s,
++		struct squashfs_base_inode_header *inodeb)
++{
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	struct inode *i = new_inode(s);
++
++	if (i) {
++		i->i_ino = inodeb->inode_number;
++		i->i_mtime.tv_sec = inodeb->mtime;
++		i->i_atime.tv_sec = inodeb->mtime;
++		i->i_ctime.tv_sec = inodeb->mtime;
++		i->i_uid = msblk->uid[inodeb->uid];
++		i->i_mode = inodeb->mode;
++		i->i_size = 0;
++		if (inodeb->guid == SQUASHFS_GUIDS)
++			i->i_gid = i->i_uid;
++		else
++			i->i_gid = msblk->guid[inodeb->guid];
++	}
++
++	return i;
++}
++
++
++static struct inode *squashfs_iget(struct super_block *s, squashfs_inode_t inode)
++{
++	struct inode *i;
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++	long long block = SQUASHFS_INODE_BLK(inode) +
++		sblk->inode_table_start;
++	unsigned int offset = SQUASHFS_INODE_OFFSET(inode);
++	long long next_block;
++	unsigned int next_offset;
++	union squashfs_inode_header id, sid;
++	struct squashfs_base_inode_header *inodeb = &id.base,
++					  *sinodeb = &sid.base;
++
++	TRACE("Entered squashfs_iget\n");
++
++	if (msblk->swap) {
++		if (!squashfs_get_cached_block(s, (char *) sinodeb, block,
++					offset, sizeof(*sinodeb), &next_block,
++					&next_offset))
++			goto failed_read;
++		SQUASHFS_SWAP_BASE_INODE_HEADER(inodeb, sinodeb,
++					sizeof(*sinodeb));
++	} else
++		if (!squashfs_get_cached_block(s, (char *) inodeb, block,
++					offset, sizeof(*inodeb), &next_block,
++					&next_offset))
++			goto failed_read;
++
++	switch(inodeb->inode_type) {
++		case SQUASHFS_FILE_TYPE: {
++			unsigned int frag_size;
++			long long frag_blk;
++			struct squashfs_reg_inode_header *inodep = &id.reg;
++			struct squashfs_reg_inode_header *sinodep = &sid.reg;
++
++			if (msblk->swap) {
++				if (!squashfs_get_cached_block(s, (char *)
++						sinodep, block, offset,
++						sizeof(*sinodep), &next_block,
++						&next_offset))
++					goto failed_read;
++				SQUASHFS_SWAP_REG_INODE_HEADER(inodep, sinodep);
++			} else
++				if (!squashfs_get_cached_block(s, (char *)
++						inodep, block, offset,
++						sizeof(*inodep), &next_block,
++						&next_offset))
++					goto failed_read;
++
++			frag_blk = SQUASHFS_INVALID_BLK;
++			if (inodep->fragment != SQUASHFS_INVALID_FRAG &&
++					!get_fragment_location(s,
++					inodep->fragment, &frag_blk, &frag_size))
++				goto failed_read;
++
++			if((i = squashfs_new_inode(s, inodeb)) == NULL)
++				goto failed_read1;
++
++			i->i_nlink = 1;
++			i->i_size = inodep->file_size;
++			i->i_fop = &generic_ro_fops;
++			i->i_mode |= S_IFREG;
++			i->i_blocks = ((i->i_size - 1) >> 9) + 1;
++			SQUASHFS_I(i)->u.s1.fragment_start_block = frag_blk;
++			SQUASHFS_I(i)->u.s1.fragment_size = frag_size;
++			SQUASHFS_I(i)->u.s1.fragment_offset = inodep->offset;
++			SQUASHFS_I(i)->start_block = inodep->start_block;
++			SQUASHFS_I(i)->u.s1.block_list_start = next_block;
++			SQUASHFS_I(i)->offset = next_offset;
++			if (sblk->block_size > 4096)
++				i->i_data.a_ops = &squashfs_aops;
++			else
++				i->i_data.a_ops = &squashfs_aops_4K;
++
++			TRACE("File inode %x:%x, start_block %llx, "
++					"block_list_start %llx, offset %x\n",
++					SQUASHFS_INODE_BLK(inode), offset,
++					inodep->start_block, next_block,
++					next_offset);
++			break;
++		}
++		case SQUASHFS_LREG_TYPE: {
++			unsigned int frag_size;
++			long long frag_blk;
++			struct squashfs_lreg_inode_header *inodep = &id.lreg;
++			struct squashfs_lreg_inode_header *sinodep = &sid.lreg;
++
++			if (msblk->swap) {
++				if (!squashfs_get_cached_block(s, (char *)
++						sinodep, block, offset,
++						sizeof(*sinodep), &next_block,
++						&next_offset))
++					goto failed_read;
++				SQUASHFS_SWAP_LREG_INODE_HEADER(inodep, sinodep);
++			} else
++				if (!squashfs_get_cached_block(s, (char *)
++						inodep, block, offset,
++						sizeof(*inodep), &next_block,
++						&next_offset))
++					goto failed_read;
++
++			frag_blk = SQUASHFS_INVALID_BLK;
++			if (inodep->fragment != SQUASHFS_INVALID_FRAG &&
++					!get_fragment_location(s,
++					inodep->fragment, &frag_blk, &frag_size))
++				goto failed_read;
++
++			if((i = squashfs_new_inode(s, inodeb)) == NULL)
++				goto failed_read1;
++
++			i->i_nlink = inodep->nlink;
++			i->i_size = inodep->file_size;
++			i->i_fop = &generic_ro_fops;
++			i->i_mode |= S_IFREG;
++			i->i_blocks = ((i->i_size - 1) >> 9) + 1;
++			SQUASHFS_I(i)->u.s1.fragment_start_block = frag_blk;
++			SQUASHFS_I(i)->u.s1.fragment_size = frag_size;
++			SQUASHFS_I(i)->u.s1.fragment_offset = inodep->offset;
++			SQUASHFS_I(i)->start_block = inodep->start_block;
++			SQUASHFS_I(i)->u.s1.block_list_start = next_block;
++			SQUASHFS_I(i)->offset = next_offset;
++			if (sblk->block_size > 4096)
++				i->i_data.a_ops = &squashfs_aops;
++			else
++				i->i_data.a_ops = &squashfs_aops_4K;
++
++			TRACE("File inode %x:%x, start_block %llx, "
++					"block_list_start %llx, offset %x\n",
++					SQUASHFS_INODE_BLK(inode), offset,
++					inodep->start_block, next_block,
++					next_offset);
++			break;
++		}
++		case SQUASHFS_DIR_TYPE: {
++			struct squashfs_dir_inode_header *inodep = &id.dir;
++			struct squashfs_dir_inode_header *sinodep = &sid.dir;
++
++			if (msblk->swap) {
++				if (!squashfs_get_cached_block(s, (char *)
++						sinodep, block, offset,
++						sizeof(*sinodep), &next_block,
++						&next_offset))
++					goto failed_read;
++				SQUASHFS_SWAP_DIR_INODE_HEADER(inodep, sinodep);
++			} else
++				if (!squashfs_get_cached_block(s, (char *)
++						inodep, block, offset,
++						sizeof(*inodep), &next_block,
++						&next_offset))
++					goto failed_read;
++
++			if((i = squashfs_new_inode(s, inodeb)) == NULL)
++				goto failed_read1;
++
++			i->i_nlink = inodep->nlink;
++			i->i_size = inodep->file_size;
++			i->i_op = &squashfs_dir_inode_ops;
++			i->i_fop = &squashfs_dir_ops;
++			i->i_mode |= S_IFDIR;
++			SQUASHFS_I(i)->start_block = inodep->start_block;
++			SQUASHFS_I(i)->offset = inodep->offset;
++			SQUASHFS_I(i)->u.s2.directory_index_count = 0;
++			SQUASHFS_I(i)->u.s2.parent_inode = inodep->parent_inode;
++
++			TRACE("Directory inode %x:%x, start_block %x, offset "
++					"%x\n", SQUASHFS_INODE_BLK(inode),
++					offset, inodep->start_block,
++					inodep->offset);
++			break;
++		}
++		case SQUASHFS_LDIR_TYPE: {
++			struct squashfs_ldir_inode_header *inodep = &id.ldir;
++			struct squashfs_ldir_inode_header *sinodep = &sid.ldir;
++
++			if (msblk->swap) {
++				if (!squashfs_get_cached_block(s, (char *)
++						sinodep, block, offset,
++						sizeof(*sinodep), &next_block,
++						&next_offset))
++					goto failed_read;
++				SQUASHFS_SWAP_LDIR_INODE_HEADER(inodep,
++						sinodep);
++			} else
++				if (!squashfs_get_cached_block(s, (char *)
++						inodep, block, offset,
++						sizeof(*inodep), &next_block,
++						&next_offset))
++					goto failed_read;
++
++			if((i = squashfs_new_inode(s, inodeb)) == NULL)
++				goto failed_read1;
++
++			i->i_nlink = inodep->nlink;
++			i->i_size = inodep->file_size;
++			i->i_op = &squashfs_dir_inode_ops;
++			i->i_fop = &squashfs_dir_ops;
++			i->i_mode |= S_IFDIR;
++			SQUASHFS_I(i)->start_block = inodep->start_block;
++			SQUASHFS_I(i)->offset = inodep->offset;
++			SQUASHFS_I(i)->u.s2.directory_index_start = next_block;
++			SQUASHFS_I(i)->u.s2.directory_index_offset =
++								next_offset;
++			SQUASHFS_I(i)->u.s2.directory_index_count =
++								inodep->i_count;
++			SQUASHFS_I(i)->u.s2.parent_inode = inodep->parent_inode;
++
++			TRACE("Long directory inode %x:%x, start_block %x, "
++					"offset %x\n",
++					SQUASHFS_INODE_BLK(inode), offset,
++					inodep->start_block, inodep->offset);
++			break;
++		}
++		case SQUASHFS_SYMLINK_TYPE: {
++			struct squashfs_symlink_inode_header *inodep =
++								&id.symlink;
++			struct squashfs_symlink_inode_header *sinodep =
++								&sid.symlink;
++
++			if (msblk->swap) {
++				if (!squashfs_get_cached_block(s, (char *)
++						sinodep, block, offset,
++						sizeof(*sinodep), &next_block,
++						&next_offset))
++					goto failed_read;
++				SQUASHFS_SWAP_SYMLINK_INODE_HEADER(inodep,
++								sinodep);
++			} else
++				if (!squashfs_get_cached_block(s, (char *)
++						inodep, block, offset,
++						sizeof(*inodep), &next_block,
++						&next_offset))
++					goto failed_read;
++
++			if((i = squashfs_new_inode(s, inodeb)) == NULL)
++				goto failed_read1;
++
++			i->i_nlink = inodep->nlink;
++			i->i_size = inodep->symlink_size;
++			i->i_op = &page_symlink_inode_operations;
++			i->i_data.a_ops = &squashfs_symlink_aops;
++			i->i_mode |= S_IFLNK;
++			SQUASHFS_I(i)->start_block = next_block;
++			SQUASHFS_I(i)->offset = next_offset;
++
++			TRACE("Symbolic link inode %x:%x, start_block %llx, "
++					"offset %x\n",
++					SQUASHFS_INODE_BLK(inode), offset,
++					next_block, next_offset);
++			break;
++		 }
++		 case SQUASHFS_BLKDEV_TYPE:
++		 case SQUASHFS_CHRDEV_TYPE: {
++			struct squashfs_dev_inode_header *inodep = &id.dev;
++			struct squashfs_dev_inode_header *sinodep = &sid.dev;
++
++			if (msblk->swap) {
++				if (!squashfs_get_cached_block(s, (char *)
++						sinodep, block, offset,
++						sizeof(*sinodep), &next_block,
++						&next_offset))
++					goto failed_read;
++				SQUASHFS_SWAP_DEV_INODE_HEADER(inodep, sinodep);
++			} else
++				if (!squashfs_get_cached_block(s, (char *)
++						inodep, block, offset,
++						sizeof(*inodep), &next_block,
++						&next_offset))
++					goto failed_read;
++
++			if ((i = squashfs_new_inode(s, inodeb)) == NULL)
++				goto failed_read1;
++
++			i->i_nlink = inodep->nlink;
++			i->i_mode |= (inodeb->inode_type ==
++					SQUASHFS_CHRDEV_TYPE) ?  S_IFCHR :
++					S_IFBLK;
++			init_special_inode(i, i->i_mode,
++					old_decode_dev(inodep->rdev));
++
++			TRACE("Device inode %x:%x, rdev %x\n",
++					SQUASHFS_INODE_BLK(inode), offset,
++					inodep->rdev);
++			break;
++		 }
++		 case SQUASHFS_FIFO_TYPE:
++		 case SQUASHFS_SOCKET_TYPE: {
++			struct squashfs_ipc_inode_header *inodep = &id.ipc;
++			struct squashfs_ipc_inode_header *sinodep = &sid.ipc;
++
++			if (msblk->swap) {
++				if (!squashfs_get_cached_block(s, (char *)
++						sinodep, block, offset,
++						sizeof(*sinodep), &next_block,
++						&next_offset))
++					goto failed_read;
++				SQUASHFS_SWAP_IPC_INODE_HEADER(inodep, sinodep);
++			} else
++				if (!squashfs_get_cached_block(s, (char *)
++						inodep, block, offset,
++						sizeof(*inodep), &next_block,
++						&next_offset))
++					goto failed_read;
++
++			if ((i = squashfs_new_inode(s, inodeb)) == NULL)
++				goto failed_read1;
++
++			i->i_nlink = inodep->nlink;
++			i->i_mode |= (inodeb->inode_type == SQUASHFS_FIFO_TYPE)
++							? S_IFIFO : S_IFSOCK;
++			init_special_inode(i, i->i_mode, 0);
++			break;
++		 }
++		 default:
++			ERROR("Unknown inode type %d in squashfs_iget!\n",
++					inodeb->inode_type);
++			goto failed_read1;
++	}
++
++	insert_inode_hash(i);
++	return i;
++
++failed_read:
++	ERROR("Unable to read inode [%llx:%x]\n", block, offset);
++
++failed_read1:
++	return NULL;
++}
++
++
++static int read_fragment_index_table(struct super_block *s)
++{
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++
++	/* Allocate fragment index table */
++	if (!(msblk->fragment_index = kmalloc(SQUASHFS_FRAGMENT_INDEX_BYTES
++					(sblk->fragments), GFP_KERNEL))) {
++		ERROR("Failed to allocate uid/gid table\n");
++		return 0;
++	}
++
++	if (SQUASHFS_FRAGMENT_INDEX_BYTES(sblk->fragments) &&
++					!squashfs_read_data(s, (char *)
++					msblk->fragment_index,
++					sblk->fragment_table_start,
++					SQUASHFS_FRAGMENT_INDEX_BYTES
++					(sblk->fragments) |
++					SQUASHFS_COMPRESSED_BIT_BLOCK, NULL)) {
++		ERROR("unable to read fragment index table\n");
++		return 0;
++	}
++
++	if (msblk->swap) {
++		int i;
++		long long fragment;
++
++		for (i = 0; i < SQUASHFS_FRAGMENT_INDEXES(sblk->fragments);
++									i++) {
++			SQUASHFS_SWAP_FRAGMENT_INDEXES((&fragment),
++						&msblk->fragment_index[i], 1);
++			msblk->fragment_index[i] = fragment;
++		}
++	}
++
++	return 1;
++}
++
++
++static int supported_squashfs_filesystem(struct squashfs_sb_info *msblk, int silent)
++{
++	struct squashfs_super_block *sblk = &msblk->sblk;
++
++	msblk->iget = squashfs_iget;
++	msblk->read_blocklist = read_blocklist;
++	msblk->read_fragment_index_table = read_fragment_index_table;
++
++	if (sblk->s_major == 1) {
++		if (!squashfs_1_0_supported(msblk)) {
++			SERROR("Major/Minor mismatch, Squashfs 1.0 filesystems "
++				"are unsupported\n");
++			SERROR("Please recompile with "
++				"Squashfs 1.0 support enabled\n");
++			return 0;
++		}
++	} else if (sblk->s_major == 2) {
++		if (!squashfs_2_0_supported(msblk)) {
++			SERROR("Major/Minor mismatch, Squashfs 2.0 filesystems "
++				"are unsupported\n");
++			SERROR("Please recompile with "
++				"Squashfs 2.0 support enabled\n");
++			return 0;
++		}
++	} else if(sblk->s_major != SQUASHFS_MAJOR || sblk->s_minor >
++			SQUASHFS_MINOR) {
++		SERROR("Major/Minor mismatch, trying to mount newer %d.%d "
++				"filesystem\n", sblk->s_major, sblk->s_minor);
++		SERROR("Please update your kernel\n");
++		return 0;
++	}
++
++	return 1;
++}
++
++
++static int squashfs_fill_super(struct super_block *s, void *data, int silent)
++{
++	struct squashfs_sb_info *msblk;
++	struct squashfs_super_block *sblk;
++	int i;
++	char b[BDEVNAME_SIZE];
++	struct inode *root;
++
++	TRACE("Entered squashfs_read_superblock\n");
++
++	if (!(s->s_fs_info = kmalloc(sizeof(struct squashfs_sb_info),
++						GFP_KERNEL))) {
++		ERROR("Failed to allocate superblock\n");
++		goto failure;
++	}
++	memset(s->s_fs_info, 0, sizeof(struct squashfs_sb_info));
++	msblk = s->s_fs_info;
++	sblk = &msblk->sblk;
++
++	msblk->devblksize = sb_min_blocksize(s, BLOCK_SIZE);
++	msblk->devblksize_log2 = ffz(~msblk->devblksize);
++
++	init_MUTEX(&msblk->read_data_mutex);
++	init_MUTEX(&msblk->read_page_mutex);
++	init_MUTEX(&msblk->block_cache_mutex);
++	init_MUTEX(&msblk->fragment_mutex);
++	init_MUTEX(&msblk->meta_index_mutex);
++
++	init_waitqueue_head(&msblk->waitq);
++	init_waitqueue_head(&msblk->fragment_wait_queue);
++
++	if (!squashfs_read_data(s, (char *) sblk, SQUASHFS_START,
++					sizeof(struct squashfs_super_block) |
++					SQUASHFS_COMPRESSED_BIT_BLOCK, NULL)) {
++		SERROR("unable to read superblock\n");
++		goto failed_mount;
++	}
++
++	/* Check it is a SQUASHFS superblock */
++	msblk->swap = 0;
++	if ((s->s_magic = sblk->s_magic) != SQUASHFS_MAGIC) {
++		if (sblk->s_magic == SQUASHFS_MAGIC_SWAP) {
++			struct squashfs_super_block ssblk;
++
++			WARNING("Mounting a different endian SQUASHFS "
++				"filesystem on %s\n", bdevname(s->s_bdev, b));
++
++			SQUASHFS_SWAP_SUPER_BLOCK(&ssblk, sblk);
++			memcpy(sblk, &ssblk, sizeof(struct squashfs_super_block));
++			msblk->swap = 1;
++		} else  {
++			SERROR("Can't find a SQUASHFS superblock on %s\n",
++							bdevname(s->s_bdev, b));
++			goto failed_mount;
++		}
++	}
++
++	/* Check the MAJOR & MINOR versions */
++	if(!supported_squashfs_filesystem(msblk, silent))
++		goto failed_mount;
++
++	TRACE("Found valid superblock on %s\n", bdevname(s->s_bdev, b));
++	TRACE("Inodes are %scompressed\n",
++					SQUASHFS_UNCOMPRESSED_INODES
++					(sblk->flags) ? "un" : "");
++	TRACE("Data is %scompressed\n",
++					SQUASHFS_UNCOMPRESSED_DATA(sblk->flags)
++					? "un" : "");
++	TRACE("Check data is %s present in the filesystem\n",
++					SQUASHFS_CHECK_DATA(sblk->flags) ?
++					"" : "not");
++	TRACE("Filesystem size %lld bytes\n", sblk->bytes_used);
++	TRACE("Block size %d\n", sblk->block_size);
++	TRACE("Number of inodes %d\n", sblk->inodes);
++	if (sblk->s_major > 1)
++		TRACE("Number of fragments %d\n", sblk->fragments);
++	TRACE("Number of uids %d\n", sblk->no_uids);
++	TRACE("Number of gids %d\n", sblk->no_guids);
++	TRACE("sblk->inode_table_start %llx\n", sblk->inode_table_start);
++	TRACE("sblk->directory_table_start %llx\n", sblk->directory_table_start);
++	if (sblk->s_major > 1)
++		TRACE("sblk->fragment_table_start %llx\n",
++					sblk->fragment_table_start);
++	TRACE("sblk->uid_start %llx\n", sblk->uid_start);
++
++	s->s_flags |= MS_RDONLY;
++	s->s_op = &squashfs_ops;
++
++	/* Init inode_table block pointer array */
++	if (!(msblk->block_cache = kmalloc(sizeof(struct squashfs_cache) *
++					SQUASHFS_CACHED_BLKS, GFP_KERNEL))) {
++		ERROR("Failed to allocate block cache\n");
++		goto failed_mount;
++	}
++
++	for (i = 0; i < SQUASHFS_CACHED_BLKS; i++)
++		msblk->block_cache[i].block = SQUASHFS_INVALID_BLK;
++
++	msblk->next_cache = 0;
++
++	/* Allocate read_data block */
++	msblk->read_size = (sblk->block_size < SQUASHFS_METADATA_SIZE) ?
++					SQUASHFS_METADATA_SIZE :
++					sblk->block_size;
++
++	if (!(msblk->read_data = kmalloc(msblk->read_size, GFP_KERNEL))) {
++		ERROR("Failed to allocate read_data block\n");
++		goto failed_mount;
++	}
++
++	/* Allocate read_page block */
++	if (!(msblk->read_page = kmalloc(sblk->block_size, GFP_KERNEL))) {
++		ERROR("Failed to allocate read_page block\n");
++		goto failed_mount;
++	}
++
++	/* Allocate uid and gid tables */
++	if (!(msblk->uid = kmalloc((sblk->no_uids + sblk->no_guids) *
++					sizeof(unsigned int), GFP_KERNEL))) {
++		ERROR("Failed to allocate uid/gid table\n");
++		goto failed_mount;
++	}
++	msblk->guid = msblk->uid + sblk->no_uids;
++
++	if (msblk->swap) {
++		unsigned int suid[sblk->no_uids + sblk->no_guids];
++
++		if (!squashfs_read_data(s, (char *) &suid, sblk->uid_start,
++					((sblk->no_uids + sblk->no_guids) *
++					 sizeof(unsigned int)) |
++					SQUASHFS_COMPRESSED_BIT_BLOCK, NULL)) {
++			ERROR("unable to read uid/gid table\n");
++			goto failed_mount;
++		}
++
++		SQUASHFS_SWAP_DATA(msblk->uid, suid, (sblk->no_uids +
++			sblk->no_guids), (sizeof(unsigned int) * 8));
++	} else
++		if (!squashfs_read_data(s, (char *) msblk->uid, sblk->uid_start,
++					((sblk->no_uids + sblk->no_guids) *
++					 sizeof(unsigned int)) |
++					SQUASHFS_COMPRESSED_BIT_BLOCK, NULL)) {
++			ERROR("unable to read uid/gid table\n");
++			goto failed_mount;
++		}
++
++
++	if (sblk->s_major == 1 && squashfs_1_0_supported(msblk))
++		goto allocate_root;
++
++	if (!(msblk->fragment = kmalloc(sizeof(struct squashfs_fragment_cache) *
++				SQUASHFS_CACHED_FRAGMENTS, GFP_KERNEL))) {
++		ERROR("Failed to allocate fragment block cache\n");
++		goto failed_mount;
++	}
++
++	for (i = 0; i < SQUASHFS_CACHED_FRAGMENTS; i++) {
++		msblk->fragment[i].locked = 0;
++		msblk->fragment[i].block = SQUASHFS_INVALID_BLK;
++		msblk->fragment[i].data = NULL;
++	}
++
++	msblk->next_fragment = 0;
++
++	/* Allocate fragment index table */
++	if (msblk->read_fragment_index_table(s) == 0)
++		goto failed_mount;
++
++allocate_root:
++	if ((root = (msblk->iget)(s, sblk->root_inode)) == NULL)
++		goto failed_mount;
++
++	if ((s->s_root = d_alloc_root(root)) == NULL) {
++		ERROR("Root inode create failed\n");
++		iput(root);
++		goto failed_mount;
++	}
++
++	TRACE("Leaving squashfs_read_super\n");
++	return 0;
++
++failed_mount:
++	kfree(msblk->fragment_index);
++	kfree(msblk->fragment);
++	kfree(msblk->uid);
++	kfree(msblk->read_page);
++	kfree(msblk->read_data);
++	kfree(msblk->block_cache);
++	kfree(msblk->fragment_index_2);
++	kfree(s->s_fs_info);
++	s->s_fs_info = NULL;
++	return -EINVAL;
++
++failure:
++	return -ENOMEM;
++}
++
++
++static int squashfs_statfs(struct dentry *dentry, struct kstatfs *buf)
++{
++	struct squashfs_sb_info *msblk = dentry->d_inode->i_sb->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++
++	TRACE("Entered squashfs_statfs\n");
++
++	buf->f_type = SQUASHFS_MAGIC;
++	buf->f_bsize = sblk->block_size;
++	buf->f_blocks = ((sblk->bytes_used - 1) >> sblk->block_log) + 1;
++	buf->f_bfree = buf->f_bavail = 0;
++	buf->f_files = sblk->inodes;
++	buf->f_ffree = 0;
++	buf->f_namelen = SQUASHFS_NAME_LEN;
++
++	return 0;
++}
++
++
++static int squashfs_symlink_readpage(struct file *file, struct page *page)
++{
++	struct inode *inode = page->mapping->host;
++	int index = page->index << PAGE_CACHE_SHIFT, length, bytes;
++	long long block = SQUASHFS_I(inode)->start_block;
++	int offset = SQUASHFS_I(inode)->offset;
++	void *pageaddr = kmap(page);
++
++	TRACE("Entered squashfs_symlink_readpage, page index %ld, start block "
++				"%llx, offset %x\n", page->index,
++				SQUASHFS_I(inode)->start_block,
++				SQUASHFS_I(inode)->offset);
++
++	for (length = 0; length < index; length += bytes) {
++		if (!(bytes = squashfs_get_cached_block(inode->i_sb, NULL,
++				block, offset, PAGE_CACHE_SIZE, &block,
++				&offset))) {
++			ERROR("Unable to read symbolic link [%llx:%x]\n", block,
++					offset);
++			goto skip_read;
++		}
++	}
++
++	if (length != index) {
++		ERROR("(squashfs_symlink_readpage) length != index\n");
++		bytes = 0;
++		goto skip_read;
++	}
++
++	bytes = (i_size_read(inode) - length) > PAGE_CACHE_SIZE ? PAGE_CACHE_SIZE :
++					i_size_read(inode) - length;
++
++	if (!(bytes = squashfs_get_cached_block(inode->i_sb, pageaddr, block,
++					offset, bytes, &block, &offset)))
++		ERROR("Unable to read symbolic link [%llx:%x]\n", block, offset);
++
++skip_read:
++	memset(pageaddr + bytes, 0, PAGE_CACHE_SIZE - bytes);
++	kunmap(page);
++	SetPageUptodate(page);
++	unlock_page(page);
++
++	return 0;
++}
++
++
++struct meta_index *locate_meta_index(struct inode *inode, int index, int offset)
++{
++	struct meta_index *meta = NULL;
++	struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info;
++	int i;
++
++	down(&msblk->meta_index_mutex);
++
++	TRACE("locate_meta_index: index %d, offset %d\n", index, offset);
++
++	if(msblk->meta_index == NULL)
++		goto not_allocated;
++
++	for (i = 0; i < SQUASHFS_META_NUMBER; i ++)
++		if (msblk->meta_index[i].inode_number == inode->i_ino &&
++				msblk->meta_index[i].offset >= offset &&
++				msblk->meta_index[i].offset <= index &&
++				msblk->meta_index[i].locked == 0) {
++			TRACE("locate_meta_index: entry %d, offset %d\n", i,
++					msblk->meta_index[i].offset);
++			meta = &msblk->meta_index[i];
++			offset = meta->offset;
++		}
++
++	if (meta)
++		meta->locked = 1;
++
++not_allocated:
++	up(&msblk->meta_index_mutex);
++
++	return meta;
++}
++
++
++struct meta_index *empty_meta_index(struct inode *inode, int offset, int skip)
++{
++	struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info;
++	struct meta_index *meta = NULL;
++	int i;
++
++	down(&msblk->meta_index_mutex);
++
++	TRACE("empty_meta_index: offset %d, skip %d\n", offset, skip);
++
++	if(msblk->meta_index == NULL) {
++		if (!(msblk->meta_index = kmalloc(sizeof(struct meta_index) *
++					SQUASHFS_META_NUMBER, GFP_KERNEL))) {
++			ERROR("Failed to allocate meta_index\n");
++			goto failed;
++		}
++		for(i = 0; i < SQUASHFS_META_NUMBER; i++) {
++			msblk->meta_index[i].inode_number = 0;
++			msblk->meta_index[i].locked = 0;
++		}
++		msblk->next_meta_index = 0;
++	}
++
++	for(i = SQUASHFS_META_NUMBER; i &&
++			msblk->meta_index[msblk->next_meta_index].locked; i --)
++		msblk->next_meta_index = (msblk->next_meta_index + 1) %
++			SQUASHFS_META_NUMBER;
++
++	if(i == 0) {
++		TRACE("empty_meta_index: failed!\n");
++		goto failed;
++	}
++
++	TRACE("empty_meta_index: returned meta entry %d, %p\n",
++			msblk->next_meta_index,
++			&msblk->meta_index[msblk->next_meta_index]);
++
++	meta = &msblk->meta_index[msblk->next_meta_index];
++	msblk->next_meta_index = (msblk->next_meta_index + 1) %
++			SQUASHFS_META_NUMBER;
++
++	meta->inode_number = inode->i_ino;
++	meta->offset = offset;
++	meta->skip = skip;
++	meta->entries = 0;
++	meta->locked = 1;
++
++failed:
++	up(&msblk->meta_index_mutex);
++	return meta;
++}
++
++
++void release_meta_index(struct inode *inode, struct meta_index *meta)
++{
++	meta->locked = 0;
++}
++
++
++static int read_block_index(struct super_block *s, int blocks, char *block_list,
++		long long *start_block, int *offset)
++{
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	unsigned int *block_listp;
++	int block = 0;
++
++	if (msblk->swap) {
++		char sblock_list[blocks << 2];
++
++		if (!squashfs_get_cached_block(s, sblock_list, *start_block,
++				*offset, blocks << 2, start_block, offset)) {
++			ERROR("Unable to read block list [%llx:%x]\n",
++				*start_block, *offset);
++			goto failure;
++		}
++		SQUASHFS_SWAP_INTS(((unsigned int *)block_list),
++				((unsigned int *)sblock_list), blocks);
++	} else
++		if (!squashfs_get_cached_block(s, block_list, *start_block,
++				*offset, blocks << 2, start_block, offset)) {
++			ERROR("Unable to read block list [%llx:%x]\n",
++				*start_block, *offset);
++			goto failure;
++		}
++
++	for (block_listp = (unsigned int *) block_list; blocks;
++				block_listp++, blocks --)
++		block += SQUASHFS_COMPRESSED_SIZE_BLOCK(*block_listp);
++
++	return block;
++
++failure:
++	return -1;
++}
++
++
++#define SIZE 256
++
++static inline int calculate_skip(int blocks) {
++	int skip = (blocks - 1) / ((SQUASHFS_SLOTS * SQUASHFS_META_ENTRIES + 1) * SQUASHFS_META_INDEXES);
++	return skip >= 7 ? 7 : skip + 1;
++}
++
++
++static int get_meta_index(struct inode *inode, int index,
++		long long *index_block, int *index_offset,
++		long long *data_block, char *block_list)
++{
++	struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++	int skip = calculate_skip(i_size_read(inode) >> sblk->block_log);
++	int offset = 0;
++	struct meta_index *meta;
++	struct meta_entry *meta_entry;
++	long long cur_index_block = SQUASHFS_I(inode)->u.s1.block_list_start;
++	int cur_offset = SQUASHFS_I(inode)->offset;
++	long long cur_data_block = SQUASHFS_I(inode)->start_block;
++	int i;
++
++	index /= SQUASHFS_META_INDEXES * skip;
++
++	while ( offset < index ) {
++		meta = locate_meta_index(inode, index, offset + 1);
++
++		if (meta == NULL) {
++			if ((meta = empty_meta_index(inode, offset + 1,
++							skip)) == NULL)
++				goto all_done;
++		} else {
++			offset = index < meta->offset + meta->entries ? index :
++				meta->offset + meta->entries - 1;
++			meta_entry = &meta->meta_entry[offset - meta->offset];
++			cur_index_block = meta_entry->index_block + sblk->inode_table_start;
++			cur_offset = meta_entry->offset;
++			cur_data_block = meta_entry->data_block;
++			TRACE("get_meta_index: offset %d, meta->offset %d, "
++				"meta->entries %d\n", offset, meta->offset,
++				meta->entries);
++			TRACE("get_meta_index: index_block 0x%llx, offset 0x%x"
++				" data_block 0x%llx\n", cur_index_block,
++				cur_offset, cur_data_block);
++		}
++
++		for (i = meta->offset + meta->entries; i <= index &&
++				i < meta->offset + SQUASHFS_META_ENTRIES; i++) {
++			int blocks = skip * SQUASHFS_META_INDEXES;
++
++			while (blocks) {
++				int block = blocks > (SIZE >> 2) ? (SIZE >> 2) :
++					blocks;
++				int res = read_block_index(inode->i_sb, block,
++					block_list, &cur_index_block,
++					&cur_offset);
++
++				if (res == -1)
++					goto failed;
++
++				cur_data_block += res;
++				blocks -= block;
++			}
++
++			meta_entry = &meta->meta_entry[i - meta->offset];
++			meta_entry->index_block = cur_index_block - sblk->inode_table_start;
++			meta_entry->offset = cur_offset;
++			meta_entry->data_block = cur_data_block;
++			meta->entries ++;
++			offset ++;
++		}
++
++		TRACE("get_meta_index: meta->offset %d, meta->entries %d\n",
++				meta->offset, meta->entries);
++
++		release_meta_index(inode, meta);
++	}
++
++all_done:
++	*index_block = cur_index_block;
++	*index_offset = cur_offset;
++	*data_block = cur_data_block;
++
++	return offset * SQUASHFS_META_INDEXES * skip;
++
++failed:
++	release_meta_index(inode, meta);
++	return -1;
++}
++
++
++static long long read_blocklist(struct inode *inode, int index,
++				int readahead_blks, char *block_list,
++				unsigned short **block_p, unsigned int *bsize)
++{
++	long long block_ptr;
++	int offset;
++	long long block;
++	int res = get_meta_index(inode, index, &block_ptr, &offset, &block,
++		block_list);
++
++	TRACE("read_blocklist: res %d, index %d, block_ptr 0x%llx, offset"
++		       " 0x%x, block 0x%llx\n", res, index, block_ptr, offset,
++		       block);
++
++	if(res == -1)
++		goto failure;
++
++	index -= res;
++
++	while ( index ) {
++		int blocks = index > (SIZE >> 2) ? (SIZE >> 2) : index;
++		int res = read_block_index(inode->i_sb, blocks, block_list,
++			&block_ptr, &offset);
++		if (res == -1)
++			goto failure;
++		block += res;
++		index -= blocks;
++	}
++
++	if (read_block_index(inode->i_sb, 1, block_list,
++			&block_ptr, &offset) == -1)
++		goto failure;
++	*bsize = *((unsigned int *) block_list);
++
++	return block;
++
++failure:
++	return 0;
++}
++
++
++static int squashfs_readpage(struct file *file, struct page *page)
++{
++	struct inode *inode = page->mapping->host;
++	struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++	unsigned char block_list[SIZE];
++	long long block;
++	unsigned int bsize, i = 0, bytes = 0, byte_offset = 0;
++	int index = page->index >> (sblk->block_log - PAGE_CACHE_SHIFT);
++ 	void *pageaddr;
++	struct squashfs_fragment_cache *fragment = NULL;
++	char *data_ptr = msblk->read_page;
++
++	int mask = (1 << (sblk->block_log - PAGE_CACHE_SHIFT)) - 1;
++	int start_index = page->index & ~mask;
++	int end_index = start_index | mask;
++
++	TRACE("Entered squashfs_readpage, page index %lx, start block %llx\n",
++					page->index,
++					SQUASHFS_I(inode)->start_block);
++
++	if (page->index >= ((i_size_read(inode) + PAGE_CACHE_SIZE - 1) >>
++					PAGE_CACHE_SHIFT))
++		goto skip_read;
++
++	if (SQUASHFS_I(inode)->u.s1.fragment_start_block == SQUASHFS_INVALID_BLK
++					|| index < (i_size_read(inode) >>
++					sblk->block_log)) {
++		if ((block = (msblk->read_blocklist)(inode, index, 1,
++					block_list, NULL, &bsize)) == 0)
++			goto skip_read;
++
++		down(&msblk->read_page_mutex);
++
++		if (!(bytes = squashfs_read_data(inode->i_sb, msblk->read_page,
++					block, bsize, NULL))) {
++			ERROR("Unable to read page, block %llx, size %x\n", block,
++					bsize);
++			up(&msblk->read_page_mutex);
++			goto skip_read;
++		}
++	} else {
++		if ((fragment = get_cached_fragment(inode->i_sb,
++					SQUASHFS_I(inode)->
++					u.s1.fragment_start_block,
++					SQUASHFS_I(inode)->u.s1.fragment_size))
++					== NULL) {
++			ERROR("Unable to read page, block %llx, size %x\n",
++					SQUASHFS_I(inode)->
++					u.s1.fragment_start_block,
++					(int) SQUASHFS_I(inode)->
++					u.s1.fragment_size);
++			goto skip_read;
++		}
++		bytes = SQUASHFS_I(inode)->u.s1.fragment_offset +
++					(i_size_read(inode) & (sblk->block_size
++					- 1));
++		byte_offset = SQUASHFS_I(inode)->u.s1.fragment_offset;
++		data_ptr = fragment->data;
++	}
++
++	for (i = start_index; i <= end_index && byte_offset < bytes;
++					i++, byte_offset += PAGE_CACHE_SIZE) {
++		struct page *push_page;
++		int available_bytes = (bytes - byte_offset) > PAGE_CACHE_SIZE ?
++					PAGE_CACHE_SIZE : bytes - byte_offset;
++
++		TRACE("bytes %d, i %d, byte_offset %d, available_bytes %d\n",
++					bytes, i, byte_offset, available_bytes);
++
++		if (i == page->index)  {
++			pageaddr = kmap_atomic(page, KM_USER0);
++			memcpy(pageaddr, data_ptr + byte_offset,
++					available_bytes);
++			memset(pageaddr + available_bytes, 0,
++					PAGE_CACHE_SIZE - available_bytes);
++			kunmap_atomic(pageaddr, KM_USER0);
++			flush_dcache_page(page);
++			SetPageUptodate(page);
++			unlock_page(page);
++		} else if ((push_page =
++				grab_cache_page_nowait(page->mapping, i))) {
++ 			pageaddr = kmap_atomic(push_page, KM_USER0);
++
++			memcpy(pageaddr, data_ptr + byte_offset,
++					available_bytes);
++			memset(pageaddr + available_bytes, 0,
++					PAGE_CACHE_SIZE - available_bytes);
++			kunmap_atomic(pageaddr, KM_USER0);
++			flush_dcache_page(push_page);
++			SetPageUptodate(push_page);
++			unlock_page(push_page);
++			page_cache_release(push_page);
++		}
++	}
++
++	if (SQUASHFS_I(inode)->u.s1.fragment_start_block == SQUASHFS_INVALID_BLK
++					|| index < (i_size_read(inode) >>
++					sblk->block_log))
++		up(&msblk->read_page_mutex);
++	else
++		release_cached_fragment(msblk, fragment);
++
++	return 0;
++
++skip_read:
++	pageaddr = kmap_atomic(page, KM_USER0);
++	memset(pageaddr + bytes, 0, PAGE_CACHE_SIZE - bytes);
++	kunmap_atomic(pageaddr, KM_USER0);
++	flush_dcache_page(page);
++	SetPageUptodate(page);
++	unlock_page(page);
++
++	return 0;
++}
++
++
++static int squashfs_readpage4K(struct file *file, struct page *page)
++{
++	struct inode *inode = page->mapping->host;
++	struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++	unsigned char block_list[SIZE];
++	long long block;
++	unsigned int bsize, bytes = 0;
++ 	void *pageaddr;
++
++	TRACE("Entered squashfs_readpage4K, page index %lx, start block %llx\n",
++					page->index,
++					SQUASHFS_I(inode)->start_block);
++
++	if (page->index >= ((i_size_read(inode) + PAGE_CACHE_SIZE - 1) >>
++					PAGE_CACHE_SHIFT)) {
++		pageaddr = kmap_atomic(page, KM_USER0);
++		goto skip_read;
++	}
++
++	if (SQUASHFS_I(inode)->u.s1.fragment_start_block == SQUASHFS_INVALID_BLK
++					|| page->index < (i_size_read(inode) >>
++					sblk->block_log)) {
++		block = (msblk->read_blocklist)(inode, page->index, 1,
++					block_list, NULL, &bsize);
++
++		down(&msblk->read_page_mutex);
++		bytes = squashfs_read_data(inode->i_sb, msblk->read_page, block,
++					bsize, NULL);
++		pageaddr = kmap_atomic(page, KM_USER0);
++		if (bytes)
++			memcpy(pageaddr, msblk->read_page, bytes);
++		else
++			ERROR("Unable to read page, block %llx, size %x\n",
++					block, bsize);
++		up(&msblk->read_page_mutex);
++	} else {
++		struct squashfs_fragment_cache *fragment =
++			get_cached_fragment(inode->i_sb,
++					SQUASHFS_I(inode)->
++					u.s1.fragment_start_block,
++					SQUASHFS_I(inode)-> u.s1.fragment_size);
++		pageaddr = kmap_atomic(page, KM_USER0);
++		if (fragment) {
++			bytes = i_size_read(inode) & (sblk->block_size - 1);
++			memcpy(pageaddr, fragment->data + SQUASHFS_I(inode)->
++					u.s1.fragment_offset, bytes);
++			release_cached_fragment(msblk, fragment);
++		} else
++			ERROR("Unable to read page, block %llx, size %x\n",
++					SQUASHFS_I(inode)->
++					u.s1.fragment_start_block, (int)
++					SQUASHFS_I(inode)-> u.s1.fragment_size);
++	}
++
++skip_read:
++	memset(pageaddr + bytes, 0, PAGE_CACHE_SIZE - bytes);
++	kunmap_atomic(pageaddr, KM_USER0);
++	flush_dcache_page(page);
++	SetPageUptodate(page);
++	unlock_page(page);
++
++	return 0;
++}
++
++
++static int get_dir_index_using_offset(struct super_block *s, long long
++				*next_block, unsigned int *next_offset,
++				long long index_start,
++				unsigned int index_offset, int i_count,
++				long long f_pos)
++{
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++	int i, length = 0;
++	struct squashfs_dir_index index;
++
++	TRACE("Entered get_dir_index_using_offset, i_count %d, f_pos %d\n",
++					i_count, (unsigned int) f_pos);
++
++	f_pos =- 3;
++	if (f_pos == 0)
++		goto finish;
++
++	for (i = 0; i < i_count; i++) {
++		if (msblk->swap) {
++			struct squashfs_dir_index sindex;
++			squashfs_get_cached_block(s, (char *) &sindex,
++					index_start, index_offset,
++					sizeof(sindex), &index_start,
++					&index_offset);
++			SQUASHFS_SWAP_DIR_INDEX(&index, &sindex);
++		} else
++			squashfs_get_cached_block(s, (char *) &index,
++					index_start, index_offset,
++					sizeof(index), &index_start,
++					&index_offset);
++
++		if (index.index > f_pos)
++			break;
++
++		squashfs_get_cached_block(s, NULL, index_start, index_offset,
++					index.size + 1, &index_start,
++					&index_offset);
++
++		length = index.index;
++		*next_block = index.start_block + sblk->directory_table_start;
++	}
++
++	*next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE;
++
++finish:
++	return length + 3;
++}
++
++
++static int get_dir_index_using_name(struct super_block *s, long long
++				*next_block, unsigned int *next_offset,
++				long long index_start,
++				unsigned int index_offset, int i_count,
++				const char *name, int size)
++{
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++	int i, length = 0;
++	char buffer[sizeof(struct squashfs_dir_index) + SQUASHFS_NAME_LEN + 1];
++	struct squashfs_dir_index *index = (struct squashfs_dir_index *) buffer;
++	char str[SQUASHFS_NAME_LEN + 1];
++
++	TRACE("Entered get_dir_index_using_name, i_count %d\n", i_count);
++
++	strncpy(str, name, size);
++	str[size] = '\0';
++
++	for (i = 0; i < i_count; i++) {
++		if (msblk->swap) {
++			struct squashfs_dir_index sindex;
++			squashfs_get_cached_block(s, (char *) &sindex,
++					index_start, index_offset,
++					sizeof(sindex), &index_start,
++					&index_offset);
++			SQUASHFS_SWAP_DIR_INDEX(index, &sindex);
++		} else
++			squashfs_get_cached_block(s, (char *) index,
++					index_start, index_offset,
++					sizeof(struct squashfs_dir_index),
++					&index_start, &index_offset);
++
++		squashfs_get_cached_block(s, index->name, index_start,
++					index_offset, index->size + 1,
++					&index_start, &index_offset);
++
++		index->name[index->size + 1] = '\0';
++
++		if (strcmp(index->name, str) > 0)
++			break;
++
++		length = index->index;
++		*next_block = index->start_block + sblk->directory_table_start;
++	}
++
++	*next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE;
++	return length + 3;
++}
++
++
++static int squashfs_readdir(struct file *file, void *dirent, filldir_t filldir)
++{
++	struct inode *i = file->f_dentry->d_inode;
++	struct squashfs_sb_info *msblk = i->i_sb->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++	long long next_block = SQUASHFS_I(i)->start_block +
++		sblk->directory_table_start;
++	int next_offset = SQUASHFS_I(i)->offset, length = 0, dirs_read = 0,
++		dir_count;
++	struct squashfs_dir_header dirh;
++	char buffer[sizeof(struct squashfs_dir_entry) + SQUASHFS_NAME_LEN + 1];
++	struct squashfs_dir_entry *dire = (struct squashfs_dir_entry *) buffer;
++
++	TRACE("Entered squashfs_readdir [%llx:%x]\n", next_block, next_offset);
++
++	while(file->f_pos < 3) {
++		char *name;
++		int size, i_ino;
++
++		if(file->f_pos == 0) {
++			name = ".";
++			size = 1;
++			i_ino = i->i_ino;
++		} else {
++			name = "..";
++			size = 2;
++			i_ino = SQUASHFS_I(i)->u.s2.parent_inode;
++		}
++		TRACE("Calling filldir(%x, %s, %d, %d, %d, %d)\n",
++				(unsigned int) dirent, name, size, (int)
++				file->f_pos, i_ino,
++				squashfs_filetype_table[1]);
++
++		if (filldir(dirent, name, size,
++				file->f_pos, i_ino,
++				squashfs_filetype_table[1]) < 0) {
++				TRACE("Filldir returned less than 0\n");
++				goto finish;
++		}
++		file->f_pos += size;
++		dirs_read++;
++	}
++
++	length = get_dir_index_using_offset(i->i_sb, &next_block, &next_offset,
++				SQUASHFS_I(i)->u.s2.directory_index_start,
++				SQUASHFS_I(i)->u.s2.directory_index_offset,
++				SQUASHFS_I(i)->u.s2.directory_index_count,
++				file->f_pos);
++
++	while (length < i_size_read(i)) {
++		/* read directory header */
++		if (msblk->swap) {
++			struct squashfs_dir_header sdirh;
++
++			if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh,
++					next_block, next_offset, sizeof(sdirh),
++					&next_block, &next_offset))
++				goto failed_read;
++
++			length += sizeof(sdirh);
++			SQUASHFS_SWAP_DIR_HEADER(&dirh, &sdirh);
++		} else {
++			if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh,
++					next_block, next_offset, sizeof(dirh),
++					&next_block, &next_offset))
++				goto failed_read;
++
++			length += sizeof(dirh);
++		}
++
++		dir_count = dirh.count + 1;
++		while (dir_count--) {
++			if (msblk->swap) {
++				struct squashfs_dir_entry sdire;
++				if (!squashfs_get_cached_block(i->i_sb, (char *)
++						&sdire, next_block, next_offset,
++						sizeof(sdire), &next_block,
++						&next_offset))
++					goto failed_read;
++
++				length += sizeof(sdire);
++				SQUASHFS_SWAP_DIR_ENTRY(dire, &sdire);
++			} else {
++				if (!squashfs_get_cached_block(i->i_sb, (char *)
++						dire, next_block, next_offset,
++						sizeof(*dire), &next_block,
++						&next_offset))
++					goto failed_read;
++
++				length += sizeof(*dire);
++			}
++
++			if (!squashfs_get_cached_block(i->i_sb, dire->name,
++						next_block, next_offset,
++						dire->size + 1, &next_block,
++						&next_offset))
++				goto failed_read;
++
++			length += dire->size + 1;
++
++			if (file->f_pos >= length)
++				continue;
++
++			dire->name[dire->size + 1] = '\0';
++
++			TRACE("Calling filldir(%x, %s, %d, %d, %x:%x, %d, %d)\n",
++					(unsigned int) dirent, dire->name,
++					dire->size + 1, (int) file->f_pos,
++					dirh.start_block, dire->offset,
++					dirh.inode_number + dire->inode_number,
++					squashfs_filetype_table[dire->type]);
++
++			if (filldir(dirent, dire->name, dire->size + 1,
++					file->f_pos,
++					dirh.inode_number + dire->inode_number,
++					squashfs_filetype_table[dire->type])
++					< 0) {
++				TRACE("Filldir returned less than 0\n");
++				goto finish;
++			}
++			file->f_pos = length;
++			dirs_read++;
++		}
++	}
++
++finish:
++	return dirs_read;
++
++failed_read:
++	ERROR("Unable to read directory block [%llx:%x]\n", next_block,
++		next_offset);
++	return 0;
++}
++
++
++static struct dentry *squashfs_lookup(struct inode *i, struct dentry *dentry,
++				struct nameidata *nd)
++{
++	const unsigned char *name = dentry->d_name.name;
++	int len = dentry->d_name.len;
++	struct inode *inode = NULL;
++	struct squashfs_sb_info *msblk = i->i_sb->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++	long long next_block = SQUASHFS_I(i)->start_block +
++				sblk->directory_table_start;
++	int next_offset = SQUASHFS_I(i)->offset, length = 0,
++				dir_count;
++	struct squashfs_dir_header dirh;
++	char buffer[sizeof(struct squashfs_dir_entry) + SQUASHFS_NAME_LEN];
++	struct squashfs_dir_entry *dire = (struct squashfs_dir_entry *) buffer;
++
++	TRACE("Entered squashfs_lookup [%llx:%x]\n", next_block, next_offset);
++
++	if (len > SQUASHFS_NAME_LEN)
++		goto exit_loop;
++
++	length = get_dir_index_using_name(i->i_sb, &next_block, &next_offset,
++				SQUASHFS_I(i)->u.s2.directory_index_start,
++				SQUASHFS_I(i)->u.s2.directory_index_offset,
++				SQUASHFS_I(i)->u.s2.directory_index_count, name,
++				len);
++
++	while (length < i_size_read(i)) {
++		/* read directory header */
++		if (msblk->swap) {
++			struct squashfs_dir_header sdirh;
++			if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh,
++					next_block, next_offset, sizeof(sdirh),
++					&next_block, &next_offset))
++				goto failed_read;
++
++			length += sizeof(sdirh);
++			SQUASHFS_SWAP_DIR_HEADER(&dirh, &sdirh);
++		} else {
++			if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh,
++					next_block, next_offset, sizeof(dirh),
++					&next_block, &next_offset))
++				goto failed_read;
++
++			length += sizeof(dirh);
++		}
++
++		dir_count = dirh.count + 1;
++		while (dir_count--) {
++			if (msblk->swap) {
++				struct squashfs_dir_entry sdire;
++				if (!squashfs_get_cached_block(i->i_sb, (char *)
++						&sdire, next_block,next_offset,
++						sizeof(sdire), &next_block,
++						&next_offset))
++					goto failed_read;
++
++				length += sizeof(sdire);
++				SQUASHFS_SWAP_DIR_ENTRY(dire, &sdire);
++			} else {
++				if (!squashfs_get_cached_block(i->i_sb, (char *)
++						dire, next_block,next_offset,
++						sizeof(*dire), &next_block,
++						&next_offset))
++					goto failed_read;
++
++				length += sizeof(*dire);
++			}
++
++			if (!squashfs_get_cached_block(i->i_sb, dire->name,
++					next_block, next_offset, dire->size + 1,
++					&next_block, &next_offset))
++				goto failed_read;
++
++			length += dire->size + 1;
++
++			if (name[0] < dire->name[0])
++				goto exit_loop;
++
++			if ((len == dire->size + 1) && !strncmp(name,
++						dire->name, len)) {
++				squashfs_inode_t ino =
++					SQUASHFS_MKINODE(dirh.start_block,
++					dire->offset);
++
++				TRACE("calling squashfs_iget for directory "
++					"entry %s, inode %x:%x, %d\n", name,
++					dirh.start_block, dire->offset,
++					dirh.inode_number + dire->inode_number);
++
++				inode = (msblk->iget)(i->i_sb, ino);
++
++				goto exit_loop;
++			}
++		}
++	}
++
++exit_loop:
++	d_add(dentry, inode);
++	return ERR_PTR(0);
++
++failed_read:
++	ERROR("Unable to read directory block [%llx:%x]\n", next_block,
++		next_offset);
++	goto exit_loop;
++}
++
++
++static void squashfs_put_super(struct super_block *s)
++{
++	int i;
++
++	if (s->s_fs_info) {
++		struct squashfs_sb_info *sbi = s->s_fs_info;
++		if (sbi->block_cache)
++			for (i = 0; i < SQUASHFS_CACHED_BLKS; i++)
++				if (sbi->block_cache[i].block !=
++							SQUASHFS_INVALID_BLK)
++					kfree(sbi->block_cache[i].data);
++		if (sbi->fragment)
++			for (i = 0; i < SQUASHFS_CACHED_FRAGMENTS; i++)
++				SQUASHFS_FREE(sbi->fragment[i].data);
++		kfree(sbi->fragment);
++		kfree(sbi->block_cache);
++		kfree(sbi->read_data);
++		kfree(sbi->read_page);
++		kfree(sbi->uid);
++		kfree(sbi->fragment_index);
++		kfree(sbi->fragment_index_2);
++		kfree(sbi->meta_index);
++		kfree(s->s_fs_info);
++		s->s_fs_info = NULL;
++	}
++}
++
++
++static int squashfs_get_sb(struct file_system_type *fs_type,
++			int flags, const char *dev_name, void *data,
++			struct vfsmount *mnt)
++{
++	return get_sb_bdev(fs_type, flags, dev_name, data, squashfs_fill_super, mnt);
++}
++
++
++static int __init init_squashfs_fs(void)
++{
++	int err = init_inodecache();
++	if (err)
++		goto out;
++
++	printk(KERN_INFO "squashfs: version 3.0 (2006/03/15) "
++		"Phillip Lougher\n");
++
++	if (!(stream.workspace = vmalloc(zlib_inflate_workspacesize()))) {
++		ERROR("Failed to allocate zlib workspace\n");
++		destroy_inodecache();
++		err = -ENOMEM;
++		goto out;
++	}
++
++	if ((err = register_filesystem(&squashfs_fs_type))) {
++		vfree(stream.workspace);
++		destroy_inodecache();
++	}
++
++out:
++	return err;
++}
++
++
++static void __exit exit_squashfs_fs(void)
++{
++	vfree(stream.workspace);
++	unregister_filesystem(&squashfs_fs_type);
++	destroy_inodecache();
++}
++
++
++static struct kmem_cache * squashfs_inode_cachep;
++
++
++static struct inode *squashfs_alloc_inode(struct super_block *sb)
++{
++	struct squashfs_inode_info *ei;
++	ei = kmem_cache_alloc(squashfs_inode_cachep, GFP_KERNEL);
++	if (!ei)
++		return NULL;
++	return &ei->vfs_inode;
++}
++
++
++static void squashfs_destroy_inode(struct inode *inode)
++{
++	kmem_cache_free(squashfs_inode_cachep, SQUASHFS_I(inode));
++}
++
++
++static void init_once(void * foo, struct kmem_cache * cachep, unsigned long flags)
++{
++	struct squashfs_inode_info *ei = foo;
++
++	inode_init_once(&ei->vfs_inode);
++}
++
++
++static int __init init_inodecache(void)
++{
++	squashfs_inode_cachep = kmem_cache_create("squashfs_inode_cache",
++	     sizeof(struct squashfs_inode_info),
++	     0, SLAB_HWCACHE_ALIGN|SLAB_RECLAIM_ACCOUNT,
++	     init_once);
++	if (squashfs_inode_cachep == NULL)
++		return -ENOMEM;
++	return 0;
++}
++
++
++static void destroy_inodecache(void)
++{
++	kmem_cache_destroy(squashfs_inode_cachep);
++}
++
++
++module_init(init_squashfs_fs);
++module_exit(exit_squashfs_fs);
++MODULE_DESCRIPTION("squashfs, a compressed read-only filesystem");
++MODULE_AUTHOR("Phillip Lougher <phillip@lougher.org.uk>");
++MODULE_LICENSE("GPL");
+--- /dev/null
++++ b/fs/squashfs/Makefile
+@@ -0,0 +1,7 @@
++#
++# Makefile for the linux squashfs routines.
++#
++
++obj-$(CONFIG_SQUASHFS) += squashfs.o
++squashfs-y += inode.o
++squashfs-y += squashfs2_0.o
+--- /dev/null
++++ b/fs/squashfs/squashfs2_0.c
+@@ -0,0 +1,758 @@
++/*
++ * Squashfs - a compressed read only filesystem for Linux
++ *
++ * Copyright (c) 2002, 2003, 2004, 2005, 2006
++ * Phillip Lougher <phillip@lougher.org.uk>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2,
++ * or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * squashfs2_0.c
++ */
++
++#include <linux/types.h>
++#include <linux/squashfs_fs.h>
++#include <linux/module.h>
++#include <linux/errno.h>
++#include <linux/slab.h>
++#include <linux/fs.h>
++#include <linux/smp_lock.h>
++#include <linux/slab.h>
++#include <linux/squashfs_fs_sb.h>
++#include <linux/squashfs_fs_i.h>
++#include <linux/buffer_head.h>
++#include <linux/vfs.h>
++#include <linux/init.h>
++#include <linux/dcache.h>
++#include <linux/wait.h>
++#include <linux/zlib.h>
++#include <linux/blkdev.h>
++#include <linux/vmalloc.h>
++#include <asm/uaccess.h>
++#include <asm/semaphore.h>
++
++#include "squashfs.h"
++static int squashfs_readdir_2(struct file *file, void *dirent, filldir_t filldir);
++static struct dentry *squashfs_lookup_2(struct inode *, struct dentry *,
++				struct nameidata *);
++
++static struct file_operations squashfs_dir_ops_2 = {
++	.read = generic_read_dir,
++	.readdir = squashfs_readdir_2
++};
++
++static struct inode_operations squashfs_dir_inode_ops_2 = {
++	.lookup = squashfs_lookup_2
++};
++
++static unsigned char squashfs_filetype_table[] = {
++	DT_UNKNOWN, DT_DIR, DT_REG, DT_LNK, DT_BLK, DT_CHR, DT_FIFO, DT_SOCK
++};
++
++static int read_fragment_index_table_2(struct super_block *s)
++{
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++
++	if (!(msblk->fragment_index_2 = kmalloc(SQUASHFS_FRAGMENT_INDEX_BYTES_2
++					(sblk->fragments), GFP_KERNEL))) {
++		ERROR("Failed to allocate uid/gid table\n");
++		return 0;
++	}
++
++	if (SQUASHFS_FRAGMENT_INDEX_BYTES_2(sblk->fragments) &&
++					!squashfs_read_data(s, (char *)
++					msblk->fragment_index_2,
++					sblk->fragment_table_start,
++					SQUASHFS_FRAGMENT_INDEX_BYTES_2
++					(sblk->fragments) |
++					SQUASHFS_COMPRESSED_BIT_BLOCK, NULL)) {
++		ERROR("unable to read fragment index table\n");
++		return 0;
++	}
++
++	if (msblk->swap) {
++		int i;
++		unsigned int fragment;
++
++		for (i = 0; i < SQUASHFS_FRAGMENT_INDEXES_2(sblk->fragments);
++									i++) {
++			SQUASHFS_SWAP_FRAGMENT_INDEXES_2((&fragment),
++						&msblk->fragment_index_2[i], 1);
++			msblk->fragment_index_2[i] = fragment;
++		}
++	}
++
++	return 1;
++}
++
++
++static int get_fragment_location_2(struct super_block *s, unsigned int fragment,
++				long long *fragment_start_block,
++				unsigned int *fragment_size)
++{
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	long long start_block =
++		msblk->fragment_index_2[SQUASHFS_FRAGMENT_INDEX_2(fragment)];
++	int offset = SQUASHFS_FRAGMENT_INDEX_OFFSET_2(fragment);
++	struct squashfs_fragment_entry_2 fragment_entry;
++
++	if (msblk->swap) {
++		struct squashfs_fragment_entry_2 sfragment_entry;
++
++		if (!squashfs_get_cached_block(s, (char *) &sfragment_entry,
++					start_block, offset,
++					sizeof(sfragment_entry), &start_block,
++					&offset))
++			goto out;
++		SQUASHFS_SWAP_FRAGMENT_ENTRY_2(&fragment_entry, &sfragment_entry);
++	} else
++		if (!squashfs_get_cached_block(s, (char *) &fragment_entry,
++					start_block, offset,
++					sizeof(fragment_entry), &start_block,
++					&offset))
++			goto out;
++
++	*fragment_start_block = fragment_entry.start_block;
++	*fragment_size = fragment_entry.size;
++
++	return 1;
++
++out:
++	return 0;
++}
++
++
++static struct inode *squashfs_new_inode(struct super_block *s,
++		struct squashfs_base_inode_header_2 *inodeb, unsigned int ino)
++{
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++	struct inode *i = new_inode(s);
++
++	if (i) {
++		i->i_ino = ino;
++		i->i_mtime.tv_sec = sblk->mkfs_time;
++		i->i_atime.tv_sec = sblk->mkfs_time;
++		i->i_ctime.tv_sec = sblk->mkfs_time;
++		i->i_uid = msblk->uid[inodeb->uid];
++		i->i_mode = inodeb->mode;
++		i->i_nlink = 1;
++		i->i_size = 0;
++		if (inodeb->guid == SQUASHFS_GUIDS)
++			i->i_gid = i->i_uid;
++		else
++			i->i_gid = msblk->guid[inodeb->guid];
++	}
++
++	return i;
++}
++
++
++static struct inode *squashfs_iget_2(struct super_block *s, squashfs_inode_t inode)
++{
++	struct inode *i;
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++	unsigned int block = SQUASHFS_INODE_BLK(inode) +
++		sblk->inode_table_start;
++	unsigned int offset = SQUASHFS_INODE_OFFSET(inode);
++	unsigned int ino = SQUASHFS_MK_VFS_INODE(block
++		- sblk->inode_table_start, offset);
++	long long next_block;
++	unsigned int next_offset;
++	union squashfs_inode_header_2 id, sid;
++	struct squashfs_base_inode_header_2 *inodeb = &id.base,
++					  *sinodeb = &sid.base;
++
++	TRACE("Entered squashfs_iget\n");
++
++	if (msblk->swap) {
++		if (!squashfs_get_cached_block(s, (char *) sinodeb, block,
++					offset, sizeof(*sinodeb), &next_block,
++					&next_offset))
++			goto failed_read;
++		SQUASHFS_SWAP_BASE_INODE_HEADER_2(inodeb, sinodeb,
++					sizeof(*sinodeb));
++	} else
++		if (!squashfs_get_cached_block(s, (char *) inodeb, block,
++					offset, sizeof(*inodeb), &next_block,
++					&next_offset))
++			goto failed_read;
++
++	switch(inodeb->inode_type) {
++		case SQUASHFS_FILE_TYPE: {
++			struct squashfs_reg_inode_header_2 *inodep = &id.reg;
++			struct squashfs_reg_inode_header_2 *sinodep = &sid.reg;
++			long long frag_blk;
++			unsigned int frag_size;
++
++			if (msblk->swap) {
++				if (!squashfs_get_cached_block(s, (char *)
++						sinodep, block, offset,
++						sizeof(*sinodep), &next_block,
++						&next_offset))
++					goto failed_read;
++				SQUASHFS_SWAP_REG_INODE_HEADER_2(inodep, sinodep);
++			} else
++				if (!squashfs_get_cached_block(s, (char *)
++						inodep, block, offset,
++						sizeof(*inodep), &next_block,
++						&next_offset))
++					goto failed_read;
++
++			frag_blk = SQUASHFS_INVALID_BLK;
++			if (inodep->fragment != SQUASHFS_INVALID_FRAG &&
++					!get_fragment_location_2(s,
++					inodep->fragment, &frag_blk, &frag_size))
++				goto failed_read;
++
++			if((i = squashfs_new_inode(s, inodeb, ino)) == NULL)
++				goto failed_read1;
++
++			i->i_size = inodep->file_size;
++			i->i_fop = &generic_ro_fops;
++			i->i_mode |= S_IFREG;
++			i->i_mtime.tv_sec = inodep->mtime;
++			i->i_atime.tv_sec = inodep->mtime;
++			i->i_ctime.tv_sec = inodep->mtime;
++			i->i_blocks = ((i->i_size - 1) >> 9) + 1;
++			i->i_blksize = PAGE_CACHE_SIZE;
++			SQUASHFS_I(i)->u.s1.fragment_start_block = frag_blk;
++			SQUASHFS_I(i)->u.s1.fragment_size = frag_size;
++			SQUASHFS_I(i)->u.s1.fragment_offset = inodep->offset;
++			SQUASHFS_I(i)->start_block = inodep->start_block;
++			SQUASHFS_I(i)->u.s1.block_list_start = next_block;
++			SQUASHFS_I(i)->offset = next_offset;
++			if (sblk->block_size > 4096)
++				i->i_data.a_ops = &squashfs_aops;
++			else
++				i->i_data.a_ops = &squashfs_aops_4K;
++
++			TRACE("File inode %x:%x, start_block %x, "
++					"block_list_start %llx, offset %x\n",
++					SQUASHFS_INODE_BLK(inode), offset,
++					inodep->start_block, next_block,
++					next_offset);
++			break;
++		}
++		case SQUASHFS_DIR_TYPE: {
++			struct squashfs_dir_inode_header_2 *inodep = &id.dir;
++			struct squashfs_dir_inode_header_2 *sinodep = &sid.dir;
++
++			if (msblk->swap) {
++				if (!squashfs_get_cached_block(s, (char *)
++						sinodep, block, offset,
++						sizeof(*sinodep), &next_block,
++						&next_offset))
++					goto failed_read;
++				SQUASHFS_SWAP_DIR_INODE_HEADER_2(inodep, sinodep);
++			} else
++				if (!squashfs_get_cached_block(s, (char *)
++						inodep, block, offset,
++						sizeof(*inodep), &next_block,
++						&next_offset))
++					goto failed_read;
++
++			if((i = squashfs_new_inode(s, inodeb, ino)) == NULL)
++				goto failed_read1;
++
++			i->i_size = inodep->file_size;
++			i->i_op = &squashfs_dir_inode_ops_2;
++			i->i_fop = &squashfs_dir_ops_2;
++			i->i_mode |= S_IFDIR;
++			i->i_mtime.tv_sec = inodep->mtime;
++			i->i_atime.tv_sec = inodep->mtime;
++			i->i_ctime.tv_sec = inodep->mtime;
++			SQUASHFS_I(i)->start_block = inodep->start_block;
++			SQUASHFS_I(i)->offset = inodep->offset;
++			SQUASHFS_I(i)->u.s2.directory_index_count = 0;
++			SQUASHFS_I(i)->u.s2.parent_inode = 0;
++
++			TRACE("Directory inode %x:%x, start_block %x, offset "
++					"%x\n", SQUASHFS_INODE_BLK(inode),
++					offset, inodep->start_block,
++					inodep->offset);
++			break;
++		}
++		case SQUASHFS_LDIR_TYPE: {
++			struct squashfs_ldir_inode_header_2 *inodep = &id.ldir;
++			struct squashfs_ldir_inode_header_2 *sinodep = &sid.ldir;
++
++			if (msblk->swap) {
++				if (!squashfs_get_cached_block(s, (char *)
++						sinodep, block, offset,
++						sizeof(*sinodep), &next_block,
++						&next_offset))
++					goto failed_read;
++				SQUASHFS_SWAP_LDIR_INODE_HEADER_2(inodep,
++						sinodep);
++			} else
++				if (!squashfs_get_cached_block(s, (char *)
++						inodep, block, offset,
++						sizeof(*inodep), &next_block,
++						&next_offset))
++					goto failed_read;
++
++			if((i = squashfs_new_inode(s, inodeb, ino)) == NULL)
++				goto failed_read1;
++
++			i->i_size = inodep->file_size;
++			i->i_op = &squashfs_dir_inode_ops_2;
++			i->i_fop = &squashfs_dir_ops_2;
++			i->i_mode |= S_IFDIR;
++			i->i_mtime.tv_sec = inodep->mtime;
++			i->i_atime.tv_sec = inodep->mtime;
++			i->i_ctime.tv_sec = inodep->mtime;
++			SQUASHFS_I(i)->start_block = inodep->start_block;
++			SQUASHFS_I(i)->offset = inodep->offset;
++			SQUASHFS_I(i)->u.s2.directory_index_start = next_block;
++			SQUASHFS_I(i)->u.s2.directory_index_offset =
++								next_offset;
++			SQUASHFS_I(i)->u.s2.directory_index_count =
++								inodep->i_count;
++			SQUASHFS_I(i)->u.s2.parent_inode = 0;
++
++			TRACE("Long directory inode %x:%x, start_block %x, "
++					"offset %x\n",
++					SQUASHFS_INODE_BLK(inode), offset,
++					inodep->start_block, inodep->offset);
++			break;
++		}
++		case SQUASHFS_SYMLINK_TYPE: {
++			struct squashfs_symlink_inode_header_2 *inodep =
++								&id.symlink;
++			struct squashfs_symlink_inode_header_2 *sinodep =
++								&sid.symlink;
++
++			if (msblk->swap) {
++				if (!squashfs_get_cached_block(s, (char *)
++						sinodep, block, offset,
++						sizeof(*sinodep), &next_block,
++						&next_offset))
++					goto failed_read;
++				SQUASHFS_SWAP_SYMLINK_INODE_HEADER_2(inodep,
++								sinodep);
++			} else
++				if (!squashfs_get_cached_block(s, (char *)
++						inodep, block, offset,
++						sizeof(*inodep), &next_block,
++						&next_offset))
++					goto failed_read;
++
++			if((i = squashfs_new_inode(s, inodeb, ino)) == NULL)
++				goto failed_read1;
++
++			i->i_size = inodep->symlink_size;
++			i->i_op = &page_symlink_inode_operations;
++			i->i_data.a_ops = &squashfs_symlink_aops;
++			i->i_mode |= S_IFLNK;
++			SQUASHFS_I(i)->start_block = next_block;
++			SQUASHFS_I(i)->offset = next_offset;
++
++			TRACE("Symbolic link inode %x:%x, start_block %llx, "
++					"offset %x\n",
++					SQUASHFS_INODE_BLK(inode), offset,
++					next_block, next_offset);
++			break;
++		 }
++		 case SQUASHFS_BLKDEV_TYPE:
++		 case SQUASHFS_CHRDEV_TYPE: {
++			struct squashfs_dev_inode_header_2 *inodep = &id.dev;
++			struct squashfs_dev_inode_header_2 *sinodep = &sid.dev;
++
++			if (msblk->swap) {
++				if (!squashfs_get_cached_block(s, (char *)
++						sinodep, block, offset,
++						sizeof(*sinodep), &next_block,
++						&next_offset))
++					goto failed_read;
++				SQUASHFS_SWAP_DEV_INODE_HEADER_2(inodep, sinodep);
++			} else
++				if (!squashfs_get_cached_block(s, (char *)
++						inodep, block, offset,
++						sizeof(*inodep), &next_block,
++						&next_offset))
++					goto failed_read;
++
++			if ((i = squashfs_new_inode(s, inodeb, ino)) == NULL)
++				goto failed_read1;
++
++			i->i_mode |= (inodeb->inode_type ==
++					SQUASHFS_CHRDEV_TYPE) ?  S_IFCHR :
++					S_IFBLK;
++			init_special_inode(i, i->i_mode,
++					old_decode_dev(inodep->rdev));
++
++			TRACE("Device inode %x:%x, rdev %x\n",
++					SQUASHFS_INODE_BLK(inode), offset,
++					inodep->rdev);
++			break;
++		 }
++		 case SQUASHFS_FIFO_TYPE:
++		 case SQUASHFS_SOCKET_TYPE: {
++			if ((i = squashfs_new_inode(s, inodeb, ino)) == NULL)
++				goto failed_read1;
++
++			i->i_mode |= (inodeb->inode_type == SQUASHFS_FIFO_TYPE)
++							? S_IFIFO : S_IFSOCK;
++			init_special_inode(i, i->i_mode, 0);
++			break;
++		 }
++		 default:
++			ERROR("Unknown inode type %d in squashfs_iget!\n",
++					inodeb->inode_type);
++			goto failed_read1;
++	}
++
++	insert_inode_hash(i);
++	return i;
++
++failed_read:
++	ERROR("Unable to read inode [%x:%x]\n", block, offset);
++
++failed_read1:
++	return NULL;
++}
++
++
++static int get_dir_index_using_offset(struct super_block *s, long long
++				*next_block, unsigned int *next_offset,
++				long long index_start,
++				unsigned int index_offset, int i_count,
++				long long f_pos)
++{
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++	int i, length = 0;
++	struct squashfs_dir_index_2 index;
++
++	TRACE("Entered get_dir_index_using_offset, i_count %d, f_pos %d\n",
++					i_count, (unsigned int) f_pos);
++
++	if (f_pos == 0)
++		goto finish;
++
++	for (i = 0; i < i_count; i++) {
++		if (msblk->swap) {
++			struct squashfs_dir_index_2 sindex;
++			squashfs_get_cached_block(s, (char *) &sindex,
++					index_start, index_offset,
++					sizeof(sindex), &index_start,
++					&index_offset);
++			SQUASHFS_SWAP_DIR_INDEX_2(&index, &sindex);
++		} else
++			squashfs_get_cached_block(s, (char *) &index,
++					index_start, index_offset,
++					sizeof(index), &index_start,
++					&index_offset);
++
++		if (index.index > f_pos)
++			break;
++
++		squashfs_get_cached_block(s, NULL, index_start, index_offset,
++					index.size + 1, &index_start,
++					&index_offset);
++
++		length = index.index;
++		*next_block = index.start_block + sblk->directory_table_start;
++	}
++
++	*next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE;
++
++finish:
++	return length;
++}
++
++
++static int get_dir_index_using_name(struct super_block *s, long long
++				*next_block, unsigned int *next_offset,
++				long long index_start,
++				unsigned int index_offset, int i_count,
++				const char *name, int size)
++{
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++	int i, length = 0;
++	char buffer[sizeof(struct squashfs_dir_index_2) + SQUASHFS_NAME_LEN + 1];
++	struct squashfs_dir_index_2 *index = (struct squashfs_dir_index_2 *) buffer;
++	char str[SQUASHFS_NAME_LEN + 1];
++
++	TRACE("Entered get_dir_index_using_name, i_count %d\n", i_count);
++
++	strncpy(str, name, size);
++	str[size] = '\0';
++
++	for (i = 0; i < i_count; i++) {
++		if (msblk->swap) {
++			struct squashfs_dir_index_2 sindex;
++			squashfs_get_cached_block(s, (char *) &sindex,
++					index_start, index_offset,
++					sizeof(sindex), &index_start,
++					&index_offset);
++			SQUASHFS_SWAP_DIR_INDEX_2(index, &sindex);
++		} else
++			squashfs_get_cached_block(s, (char *) index,
++					index_start, index_offset,
++					sizeof(struct squashfs_dir_index_2),
++					&index_start, &index_offset);
++
++		squashfs_get_cached_block(s, index->name, index_start,
++					index_offset, index->size + 1,
++					&index_start, &index_offset);
++
++		index->name[index->size + 1] = '\0';
++
++		if (strcmp(index->name, str) > 0)
++			break;
++
++		length = index->index;
++		*next_block = index->start_block + sblk->directory_table_start;
++	}
++
++	*next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE;
++	return length;
++}
++
++
++static int squashfs_readdir_2(struct file *file, void *dirent, filldir_t filldir)
++{
++	struct inode *i = file->f_dentry->d_inode;
++	struct squashfs_sb_info *msblk = i->i_sb->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++	long long next_block = SQUASHFS_I(i)->start_block +
++		sblk->directory_table_start;
++	int next_offset = SQUASHFS_I(i)->offset, length = 0, dirs_read = 0,
++		dir_count;
++	struct squashfs_dir_header_2 dirh;
++	char buffer[sizeof(struct squashfs_dir_entry_2) + SQUASHFS_NAME_LEN + 1];
++	struct squashfs_dir_entry_2 *dire = (struct squashfs_dir_entry_2 *) buffer;
++
++	TRACE("Entered squashfs_readdir_2 [%llx:%x]\n", next_block, next_offset);
++
++	length = get_dir_index_using_offset(i->i_sb, &next_block, &next_offset,
++				SQUASHFS_I(i)->u.s2.directory_index_start,
++				SQUASHFS_I(i)->u.s2.directory_index_offset,
++				SQUASHFS_I(i)->u.s2.directory_index_count,
++				file->f_pos);
++
++	while (length < i_size_read(i)) {
++		/* read directory header */
++		if (msblk->swap) {
++			struct squashfs_dir_header_2 sdirh;
++
++			if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh,
++					next_block, next_offset, sizeof(sdirh),
++					&next_block, &next_offset))
++				goto failed_read;
++
++			length += sizeof(sdirh);
++			SQUASHFS_SWAP_DIR_HEADER_2(&dirh, &sdirh);
++		} else {
++			if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh,
++					next_block, next_offset, sizeof(dirh),
++					&next_block, &next_offset))
++				goto failed_read;
++
++			length += sizeof(dirh);
++		}
++
++		dir_count = dirh.count + 1;
++		while (dir_count--) {
++			if (msblk->swap) {
++				struct squashfs_dir_entry_2 sdire;
++				if (!squashfs_get_cached_block(i->i_sb, (char *)
++						&sdire, next_block, next_offset,
++						sizeof(sdire), &next_block,
++						&next_offset))
++					goto failed_read;
++
++				length += sizeof(sdire);
++				SQUASHFS_SWAP_DIR_ENTRY_2(dire, &sdire);
++			} else {
++				if (!squashfs_get_cached_block(i->i_sb, (char *)
++						dire, next_block, next_offset,
++						sizeof(*dire), &next_block,
++						&next_offset))
++					goto failed_read;
++
++				length += sizeof(*dire);
++			}
++
++			if (!squashfs_get_cached_block(i->i_sb, dire->name,
++						next_block, next_offset,
++						dire->size + 1, &next_block,
++						&next_offset))
++				goto failed_read;
++
++			length += dire->size + 1;
++
++			if (file->f_pos >= length)
++				continue;
++
++			dire->name[dire->size + 1] = '\0';
++
++			TRACE("Calling filldir(%x, %s, %d, %d, %x:%x, %d)\n",
++					(unsigned int) dirent, dire->name,
++					dire->size + 1, (int) file->f_pos,
++					dirh.start_block, dire->offset,
++					squashfs_filetype_table[dire->type]);
++
++			if (filldir(dirent, dire->name, dire->size + 1,
++					file->f_pos, SQUASHFS_MK_VFS_INODE(
++					dirh.start_block, dire->offset),
++					squashfs_filetype_table[dire->type])
++					< 0) {
++				TRACE("Filldir returned less than 0\n");
++				goto finish;
++			}
++			file->f_pos = length;
++			dirs_read++;
++		}
++	}
++
++finish:
++	return dirs_read;
++
++failed_read:
++	ERROR("Unable to read directory block [%llx:%x]\n", next_block,
++		next_offset);
++	return 0;
++}
++
++
++static struct dentry *squashfs_lookup_2(struct inode *i, struct dentry *dentry,
++				struct nameidata *nd)
++{
++	const unsigned char *name = dentry->d_name.name;
++	int len = dentry->d_name.len;
++	struct inode *inode = NULL;
++	struct squashfs_sb_info *msblk = i->i_sb->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++	long long next_block = SQUASHFS_I(i)->start_block +
++				sblk->directory_table_start;
++	int next_offset = SQUASHFS_I(i)->offset, length = 0,
++				dir_count;
++	struct squashfs_dir_header_2 dirh;
++	char buffer[sizeof(struct squashfs_dir_entry_2) + SQUASHFS_NAME_LEN];
++	struct squashfs_dir_entry_2 *dire = (struct squashfs_dir_entry_2 *) buffer;
++	int sorted = sblk->s_major == 2 && sblk->s_minor >= 1;
++
++	TRACE("Entered squashfs_lookup [%llx:%x]\n", next_block, next_offset);
++
++	if (len > SQUASHFS_NAME_LEN)
++		goto exit_loop;
++
++	length = get_dir_index_using_name(i->i_sb, &next_block, &next_offset,
++				SQUASHFS_I(i)->u.s2.directory_index_start,
++				SQUASHFS_I(i)->u.s2.directory_index_offset,
++				SQUASHFS_I(i)->u.s2.directory_index_count, name,
++				len);
++
++	while (length < i_size_read(i)) {
++		/* read directory header */
++		if (msblk->swap) {
++			struct squashfs_dir_header_2 sdirh;
++			if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh,
++					next_block, next_offset, sizeof(sdirh),
++					&next_block, &next_offset))
++				goto failed_read;
++
++			length += sizeof(sdirh);
++			SQUASHFS_SWAP_DIR_HEADER_2(&dirh, &sdirh);
++		} else {
++			if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh,
++					next_block, next_offset, sizeof(dirh),
++					&next_block, &next_offset))
++				goto failed_read;
++
++			length += sizeof(dirh);
++		}
++
++		dir_count = dirh.count + 1;
++		while (dir_count--) {
++			if (msblk->swap) {
++				struct squashfs_dir_entry_2 sdire;
++				if (!squashfs_get_cached_block(i->i_sb, (char *)
++						&sdire, next_block,next_offset,
++						sizeof(sdire), &next_block,
++						&next_offset))
++					goto failed_read;
++
++				length += sizeof(sdire);
++				SQUASHFS_SWAP_DIR_ENTRY_2(dire, &sdire);
++			} else {
++				if (!squashfs_get_cached_block(i->i_sb, (char *)
++						dire, next_block,next_offset,
++						sizeof(*dire), &next_block,
++						&next_offset))
++					goto failed_read;
++
++				length += sizeof(*dire);
++			}
++
++			if (!squashfs_get_cached_block(i->i_sb, dire->name,
++					next_block, next_offset, dire->size + 1,
++					&next_block, &next_offset))
++				goto failed_read;
++
++			length += dire->size + 1;
++
++			if (sorted && name[0] < dire->name[0])
++				goto exit_loop;
++
++			if ((len == dire->size + 1) && !strncmp(name,
++						dire->name, len)) {
++				squashfs_inode_t ino =
++					SQUASHFS_MKINODE(dirh.start_block,
++					dire->offset);
++
++				TRACE("calling squashfs_iget for directory "
++					"entry %s, inode %x:%x, %lld\n", name,
++					dirh.start_block, dire->offset, ino);
++
++				inode = (msblk->iget)(i->i_sb, ino);
++
++				goto exit_loop;
++			}
++		}
++	}
++
++exit_loop:
++	d_add(dentry, inode);
++	return ERR_PTR(0);
++
++failed_read:
++	ERROR("Unable to read directory block [%llx:%x]\n", next_block,
++		next_offset);
++	goto exit_loop;
++}
++
++
++int squashfs_2_0_supported(struct squashfs_sb_info *msblk)
++{
++	struct squashfs_super_block *sblk = &msblk->sblk;
++
++	msblk->iget = squashfs_iget_2;
++	msblk->read_fragment_index_table = read_fragment_index_table_2;
++
++	sblk->bytes_used = sblk->bytes_used_2;
++	sblk->uid_start = sblk->uid_start_2;
++	sblk->guid_start = sblk->guid_start_2;
++	sblk->inode_table_start = sblk->inode_table_start_2;
++	sblk->directory_table_start = sblk->directory_table_start_2;
++	sblk->fragment_table_start = sblk->fragment_table_start_2;
++
++	return 1;
++}
+--- /dev/null
++++ b/fs/squashfs/squashfs.h
+@@ -0,0 +1,86 @@
++/*
++ * Squashfs - a compressed read only filesystem for Linux
++ *
++ * Copyright (c) 2002, 2003, 2004, 2005, 2006
++ * Phillip Lougher <phillip@lougher.org.uk>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2,
++ * or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * squashfs.h
++ */
++
++#ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY
++#undef CONFIG_SQUASHFS_1_0_COMPATIBILITY
++#endif
++
++#ifdef SQUASHFS_TRACE
++#define TRACE(s, args...)	printk(KERN_NOTICE "SQUASHFS: "s, ## args)
++#else
++#define TRACE(s, args...)	{}
++#endif
++
++#define ERROR(s, args...)	printk(KERN_ERR "SQUASHFS error: "s, ## args)
++
++#define SERROR(s, args...)	do { \
++				if (!silent) \
++				printk(KERN_ERR "SQUASHFS error: "s, ## args);\
++				} while(0)
++
++#define WARNING(s, args...)	printk(KERN_WARNING "SQUASHFS: "s, ## args)
++
++static inline struct squashfs_inode_info *SQUASHFS_I(struct inode *inode)
++{
++	return list_entry(inode, struct squashfs_inode_info, vfs_inode);
++}
++
++#if defined(CONFIG_SQUASHFS_1_0_COMPATIBILITY ) || defined(CONFIG_SQUASHFS_2_0_COMPATIBILITY)
++#define SQSH_EXTERN
++extern unsigned int squashfs_read_data(struct super_block *s, char *buffer,
++				long long index, unsigned int length,
++				long long *next_index);
++extern int squashfs_get_cached_block(struct super_block *s, char *buffer,
++				long long block, unsigned int offset,
++				int length, long long *next_block,
++				unsigned int *next_offset);
++extern void release_cached_fragment(struct squashfs_sb_info *msblk, struct
++					squashfs_fragment_cache *fragment);
++extern struct squashfs_fragment_cache *get_cached_fragment(struct super_block
++					*s, long long start_block,
++					int length);
++extern struct address_space_operations squashfs_symlink_aops;
++extern struct address_space_operations squashfs_aops;
++extern struct address_space_operations squashfs_aops_4K;
++extern struct inode_operations squashfs_dir_inode_ops;
++#else
++#define SQSH_EXTERN static
++#endif
++
++#ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY
++extern int squashfs_1_0_supported(struct squashfs_sb_info *msblk);
++#else
++static inline int squashfs_1_0_supported(struct squashfs_sb_info *msblk)
++{
++	return 0;
++}
++#endif
++
++#ifdef CONFIG_SQUASHFS_2_0_COMPATIBILITY
++extern int squashfs_2_0_supported(struct squashfs_sb_info *msblk);
++#else
++static inline int squashfs_2_0_supported(struct squashfs_sb_info *msblk)
++{
++	return 0;
++}
++#endif
+--- a/include/linux/magic.h
++++ b/include/linux/magic.h
+@@ -35,6 +35,9 @@
+ #define REISER2FS_SUPER_MAGIC_STRING	"ReIsEr2Fs"
+ #define REISER2FS_JR_SUPER_MAGIC_STRING	"ReIsEr3Fs"
+ 
++#define SQUASHFS_MAGIC			0x73717368
++#define SQUASHFS_MAGIC_SWAP		0x68737173
++
+ #define SMB_SUPER_MAGIC		0x517B
+ #define USBDEVICE_SUPER_MAGIC	0x9fa2
+ #define CGROUP_SUPER_MAGIC	0x27e0eb
+--- /dev/null
++++ b/include/linux/squashfs_fs.h
+@@ -0,0 +1,911 @@
++#ifndef SQUASHFS_FS
++#define SQUASHFS_FS
++
++/*
++ * Squashfs
++ *
++ * Copyright (c) 2002, 2003, 2004, 2005, 2006
++ * Phillip Lougher <phillip@lougher.org.uk>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2,
++ * or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * squashfs_fs.h
++ */
++
++#ifndef CONFIG_SQUASHFS_2_0_COMPATIBILITY
++#define CONFIG_SQUASHFS_2_0_COMPATIBILITY
++#endif
++
++#ifdef	CONFIG_SQUASHFS_VMALLOC
++#define SQUASHFS_ALLOC(a)		vmalloc(a)
++#define SQUASHFS_FREE(a)		vfree(a)
++#else
++#define SQUASHFS_ALLOC(a)		kmalloc(a, GFP_KERNEL)
++#define SQUASHFS_FREE(a)		kfree(a)
++#endif
++#define SQUASHFS_CACHED_FRAGMENTS	CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE
++#define SQUASHFS_MAJOR			3
++#define SQUASHFS_MINOR			0
++#define SQUASHFS_START			0
++
++/* size of metadata (inode and directory) blocks */
++#define SQUASHFS_METADATA_SIZE		8192
++#define SQUASHFS_METADATA_LOG		13
++
++/* default size of data blocks */
++#define SQUASHFS_FILE_SIZE		65536
++#define SQUASHFS_FILE_LOG		16
++
++#define SQUASHFS_FILE_MAX_SIZE		65536
++
++/* Max number of uids and gids */
++#define SQUASHFS_UIDS			256
++#define SQUASHFS_GUIDS			255
++
++/* Max length of filename (not 255) */
++#define SQUASHFS_NAME_LEN		256
++
++#define SQUASHFS_INVALID		((long long) 0xffffffffffff)
++#define SQUASHFS_INVALID_FRAG		((unsigned int) 0xffffffff)
++#define SQUASHFS_INVALID_BLK		((long long) -1)
++#define SQUASHFS_USED_BLK		((long long) -2)
++
++/* Filesystem flags */
++#define SQUASHFS_NOI			0
++#define SQUASHFS_NOD			1
++#define SQUASHFS_CHECK			2
++#define SQUASHFS_NOF			3
++#define SQUASHFS_NO_FRAG		4
++#define SQUASHFS_ALWAYS_FRAG		5
++#define SQUASHFS_DUPLICATE		6
++
++#define SQUASHFS_BIT(flag, bit)		((flag >> bit) & 1)
++
++#define SQUASHFS_UNCOMPRESSED_INODES(flags)	SQUASHFS_BIT(flags, \
++						SQUASHFS_NOI)
++
++#define SQUASHFS_UNCOMPRESSED_DATA(flags)	SQUASHFS_BIT(flags, \
++						SQUASHFS_NOD)
++
++#define SQUASHFS_UNCOMPRESSED_FRAGMENTS(flags)	SQUASHFS_BIT(flags, \
++						SQUASHFS_NOF)
++
++#define SQUASHFS_NO_FRAGMENTS(flags)		SQUASHFS_BIT(flags, \
++						SQUASHFS_NO_FRAG)
++
++#define SQUASHFS_ALWAYS_FRAGMENTS(flags)	SQUASHFS_BIT(flags, \
++						SQUASHFS_ALWAYS_FRAG)
++
++#define SQUASHFS_DUPLICATES(flags)		SQUASHFS_BIT(flags, \
++						SQUASHFS_DUPLICATE)
++
++#define SQUASHFS_CHECK_DATA(flags)		SQUASHFS_BIT(flags, \
++						SQUASHFS_CHECK)
++
++#define SQUASHFS_MKFLAGS(noi, nod, check_data, nof, no_frag, always_frag, \
++		duplicate_checking)	(noi | (nod << 1) | (check_data << 2) \
++		| (nof << 3) | (no_frag << 4) | (always_frag << 5) | \
++		(duplicate_checking << 6))
++
++/* Max number of types and file types */
++#define SQUASHFS_DIR_TYPE		1
++#define SQUASHFS_FILE_TYPE		2
++#define SQUASHFS_SYMLINK_TYPE		3
++#define SQUASHFS_BLKDEV_TYPE		4
++#define SQUASHFS_CHRDEV_TYPE		5
++#define SQUASHFS_FIFO_TYPE		6
++#define SQUASHFS_SOCKET_TYPE		7
++#define SQUASHFS_LDIR_TYPE		8
++#define SQUASHFS_LREG_TYPE		9
++
++/* 1.0 filesystem type definitions */
++#define SQUASHFS_TYPES			5
++#define SQUASHFS_IPC_TYPE		0
++
++/* Flag whether block is compressed or uncompressed, bit is set if block is
++ * uncompressed */
++#define SQUASHFS_COMPRESSED_BIT		(1 << 15)
++
++#define SQUASHFS_COMPRESSED_SIZE(B)	(((B) & ~SQUASHFS_COMPRESSED_BIT) ? \
++		(B) & ~SQUASHFS_COMPRESSED_BIT :  SQUASHFS_COMPRESSED_BIT)
++
++#define SQUASHFS_COMPRESSED(B)		(!((B) & SQUASHFS_COMPRESSED_BIT))
++
++#define SQUASHFS_COMPRESSED_BIT_BLOCK		(1 << 24)
++
++#define SQUASHFS_COMPRESSED_SIZE_BLOCK(B)	(((B) & \
++	~SQUASHFS_COMPRESSED_BIT_BLOCK) ? (B) & \
++	~SQUASHFS_COMPRESSED_BIT_BLOCK : SQUASHFS_COMPRESSED_BIT_BLOCK)
++
++#define SQUASHFS_COMPRESSED_BLOCK(B)	(!((B) & SQUASHFS_COMPRESSED_BIT_BLOCK))
++
++/*
++ * Inode number ops.  Inodes consist of a compressed block number, and an
++ * uncompressed  offset within that block
++ */
++#define SQUASHFS_INODE_BLK(a)		((unsigned int) ((a) >> 16))
++
++#define SQUASHFS_INODE_OFFSET(a)	((unsigned int) ((a) & 0xffff))
++
++#define SQUASHFS_MKINODE(A, B)		((squashfs_inode_t)(((squashfs_inode_t) (A)\
++					<< 16) + (B)))
++
++/* Compute 32 bit VFS inode number from squashfs inode number */
++#define SQUASHFS_MK_VFS_INODE(a, b)	((unsigned int) (((a) << 8) + \
++					((b) >> 2) + 1))
++/* XXX */
++
++/* Translate between VFS mode and squashfs mode */
++#define SQUASHFS_MODE(a)		((a) & 0xfff)
++
++/* fragment and fragment table defines */
++#define SQUASHFS_FRAGMENT_BYTES(A)	(A * sizeof(struct squashfs_fragment_entry))
++
++#define SQUASHFS_FRAGMENT_INDEX(A)	(SQUASHFS_FRAGMENT_BYTES(A) / \
++					SQUASHFS_METADATA_SIZE)
++
++#define SQUASHFS_FRAGMENT_INDEX_OFFSET(A)	(SQUASHFS_FRAGMENT_BYTES(A) % \
++						SQUASHFS_METADATA_SIZE)
++
++#define SQUASHFS_FRAGMENT_INDEXES(A)	((SQUASHFS_FRAGMENT_BYTES(A) + \
++					SQUASHFS_METADATA_SIZE - 1) / \
++					SQUASHFS_METADATA_SIZE)
++
++#define SQUASHFS_FRAGMENT_INDEX_BYTES(A)	(SQUASHFS_FRAGMENT_INDEXES(A) *\
++						sizeof(long long))
++
++/* cached data constants for filesystem */
++#define SQUASHFS_CACHED_BLKS		8
++
++#define SQUASHFS_MAX_FILE_SIZE_LOG	64
++
++#define SQUASHFS_MAX_FILE_SIZE		((long long) 1 << \
++					(SQUASHFS_MAX_FILE_SIZE_LOG - 2))
++
++#define SQUASHFS_MARKER_BYTE		0xff
++
++/* meta index cache */
++#define SQUASHFS_META_INDEXES	(SQUASHFS_METADATA_SIZE / sizeof(unsigned int))
++#define SQUASHFS_META_ENTRIES	31
++#define SQUASHFS_META_NUMBER	8
++#define SQUASHFS_SLOTS		4
++
++#include <linux/magic.h>
++
++struct meta_entry {
++	long long		data_block;
++	unsigned int		index_block;
++	unsigned short		offset;
++	unsigned short		pad;
++};
++
++struct meta_index {
++	unsigned int		inode_number;
++	unsigned int		offset;
++	unsigned short		entries;
++	unsigned short		skip;
++	unsigned short		locked;
++	unsigned short		pad;
++	struct meta_entry	meta_entry[SQUASHFS_META_ENTRIES];
++};
++
++
++/*
++ * definitions for structures on disk
++ */
++
++typedef long long		squashfs_block_t;
++typedef long long		squashfs_inode_t;
++
++struct squashfs_super_block {
++	unsigned int		s_magic;
++	unsigned int		inodes;
++	unsigned int		bytes_used_2;
++	unsigned int		uid_start_2;
++	unsigned int		guid_start_2;
++	unsigned int		inode_table_start_2;
++	unsigned int		directory_table_start_2;
++	unsigned int		s_major:16;
++	unsigned int		s_minor:16;
++	unsigned int		block_size_1:16;
++	unsigned int		block_log:16;
++	unsigned int		flags:8;
++	unsigned int		no_uids:8;
++	unsigned int		no_guids:8;
++	unsigned int		mkfs_time /* time of filesystem creation */;
++	squashfs_inode_t	root_inode;
++	unsigned int		block_size;
++	unsigned int		fragments;
++	unsigned int		fragment_table_start_2;
++	long long		bytes_used;
++	long long		uid_start;
++	long long		guid_start;
++	long long		inode_table_start;
++	long long		directory_table_start;
++	long long		fragment_table_start;
++	long long		unused;
++} __attribute__ ((packed));
++
++struct squashfs_dir_index {
++	unsigned int		index;
++	unsigned int		start_block;
++	unsigned char		size;
++	unsigned char		name[0];
++} __attribute__ ((packed));
++
++#define SQUASHFS_BASE_INODE_HEADER		\
++	unsigned int		inode_type:4;	\
++	unsigned int		mode:12;	\
++	unsigned int		uid:8;		\
++	unsigned int		guid:8;		\
++	unsigned int		mtime;		\
++	unsigned int 		inode_number;
++
++struct squashfs_base_inode_header {
++	SQUASHFS_BASE_INODE_HEADER;
++} __attribute__ ((packed));
++
++struct squashfs_ipc_inode_header {
++	SQUASHFS_BASE_INODE_HEADER;
++	unsigned int		nlink;
++} __attribute__ ((packed));
++
++struct squashfs_dev_inode_header {
++	SQUASHFS_BASE_INODE_HEADER;
++	unsigned int		nlink;
++	unsigned short		rdev;
++} __attribute__ ((packed));
++
++struct squashfs_symlink_inode_header {
++	SQUASHFS_BASE_INODE_HEADER;
++	unsigned int		nlink;
++	unsigned short		symlink_size;
++	char			symlink[0];
++} __attribute__ ((packed));
++
++struct squashfs_reg_inode_header {
++	SQUASHFS_BASE_INODE_HEADER;
++	squashfs_block_t	start_block;
++	unsigned int		fragment;
++	unsigned int		offset;
++	unsigned int		file_size;
++	unsigned short		block_list[0];
++} __attribute__ ((packed));
++
++struct squashfs_lreg_inode_header {
++	SQUASHFS_BASE_INODE_HEADER;
++	unsigned int		nlink;
++	squashfs_block_t	start_block;
++	unsigned int		fragment;
++	unsigned int		offset;
++	long long		file_size;
++	unsigned short		block_list[0];
++} __attribute__ ((packed));
++
++struct squashfs_dir_inode_header {
++	SQUASHFS_BASE_INODE_HEADER;
++	unsigned int		nlink;
++	unsigned int		file_size:19;
++	unsigned int		offset:13;
++	unsigned int		start_block;
++	unsigned int		parent_inode;
++} __attribute__  ((packed));
++
++struct squashfs_ldir_inode_header {
++	SQUASHFS_BASE_INODE_HEADER;
++	unsigned int		nlink;
++	unsigned int		file_size:27;
++	unsigned int		offset:13;
++	unsigned int		start_block;
++	unsigned int		i_count:16;
++	unsigned int		parent_inode;
++	struct squashfs_dir_index	index[0];
++} __attribute__  ((packed));
++
++union squashfs_inode_header {
++	struct squashfs_base_inode_header	base;
++	struct squashfs_dev_inode_header	dev;
++	struct squashfs_symlink_inode_header	symlink;
++	struct squashfs_reg_inode_header	reg;
++	struct squashfs_lreg_inode_header	lreg;
++	struct squashfs_dir_inode_header	dir;
++	struct squashfs_ldir_inode_header	ldir;
++	struct squashfs_ipc_inode_header	ipc;
++};
++
++struct squashfs_dir_entry {
++	unsigned int		offset:13;
++	unsigned int		type:3;
++	unsigned int		size:8;
++	int			inode_number:16;
++	char			name[0];
++} __attribute__ ((packed));
++
++struct squashfs_dir_header {
++	unsigned int		count:8;
++	unsigned int		start_block;
++	unsigned int		inode_number;
++} __attribute__ ((packed));
++
++struct squashfs_fragment_entry {
++	long long		start_block;
++	unsigned int		size;
++	unsigned int		unused;
++} __attribute__ ((packed));
++
++extern int squashfs_uncompress_block(void *d, int dstlen, void *s, int srclen);
++extern int squashfs_uncompress_init(void);
++extern int squashfs_uncompress_exit(void);
++
++/*
++ * macros to convert each packed bitfield structure from little endian to big
++ * endian and vice versa.  These are needed when creating or using a filesystem
++ * on a machine with different byte ordering to the target architecture.
++ *
++ */
++
++#define SQUASHFS_SWAP_START \
++	int bits;\
++	int b_pos;\
++	unsigned long long val;\
++	unsigned char *s;\
++	unsigned char *d;
++
++#define SQUASHFS_SWAP_SUPER_BLOCK(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_super_block));\
++	SQUASHFS_SWAP((s)->s_magic, d, 0, 32);\
++	SQUASHFS_SWAP((s)->inodes, d, 32, 32);\
++	SQUASHFS_SWAP((s)->bytes_used_2, d, 64, 32);\
++	SQUASHFS_SWAP((s)->uid_start_2, d, 96, 32);\
++	SQUASHFS_SWAP((s)->guid_start_2, d, 128, 32);\
++	SQUASHFS_SWAP((s)->inode_table_start_2, d, 160, 32);\
++	SQUASHFS_SWAP((s)->directory_table_start_2, d, 192, 32);\
++	SQUASHFS_SWAP((s)->s_major, d, 224, 16);\
++	SQUASHFS_SWAP((s)->s_minor, d, 240, 16);\
++	SQUASHFS_SWAP((s)->block_size_1, d, 256, 16);\
++	SQUASHFS_SWAP((s)->block_log, d, 272, 16);\
++	SQUASHFS_SWAP((s)->flags, d, 288, 8);\
++	SQUASHFS_SWAP((s)->no_uids, d, 296, 8);\
++	SQUASHFS_SWAP((s)->no_guids, d, 304, 8);\
++	SQUASHFS_SWAP((s)->mkfs_time, d, 312, 32);\
++	SQUASHFS_SWAP((s)->root_inode, d, 344, 64);\
++	SQUASHFS_SWAP((s)->block_size, d, 408, 32);\
++	SQUASHFS_SWAP((s)->fragments, d, 440, 32);\
++	SQUASHFS_SWAP((s)->fragment_table_start_2, d, 472, 32);\
++	SQUASHFS_SWAP((s)->bytes_used, d, 504, 64);\
++	SQUASHFS_SWAP((s)->uid_start, d, 568, 64);\
++	SQUASHFS_SWAP((s)->guid_start, d, 632, 64);\
++	SQUASHFS_SWAP((s)->inode_table_start, d, 696, 64);\
++	SQUASHFS_SWAP((s)->directory_table_start, d, 760, 64);\
++	SQUASHFS_SWAP((s)->fragment_table_start, d, 824, 64);\
++	SQUASHFS_SWAP((s)->unused, d, 888, 64);\
++}
++
++#define SQUASHFS_SWAP_BASE_INODE_CORE(s, d, n)\
++	SQUASHFS_MEMSET(s, d, n);\
++	SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\
++	SQUASHFS_SWAP((s)->mode, d, 4, 12);\
++	SQUASHFS_SWAP((s)->uid, d, 16, 8);\
++	SQUASHFS_SWAP((s)->guid, d, 24, 8);\
++	SQUASHFS_SWAP((s)->mtime, d, 32, 32);\
++	SQUASHFS_SWAP((s)->inode_number, d, 64, 32);
++
++#define SQUASHFS_SWAP_BASE_INODE_HEADER(s, d, n) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, n)\
++}
++
++#define SQUASHFS_SWAP_IPC_INODE_HEADER(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
++			sizeof(struct squashfs_ipc_inode_header))\
++	SQUASHFS_SWAP((s)->nlink, d, 96, 32);\
++}
++
++#define SQUASHFS_SWAP_DEV_INODE_HEADER(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
++			sizeof(struct squashfs_dev_inode_header)); \
++	SQUASHFS_SWAP((s)->nlink, d, 96, 32);\
++	SQUASHFS_SWAP((s)->rdev, d, 128, 16);\
++}
++
++#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
++			sizeof(struct squashfs_symlink_inode_header));\
++	SQUASHFS_SWAP((s)->nlink, d, 96, 32);\
++	SQUASHFS_SWAP((s)->symlink_size, d, 128, 16);\
++}
++
++#define SQUASHFS_SWAP_REG_INODE_HEADER(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
++			sizeof(struct squashfs_reg_inode_header));\
++	SQUASHFS_SWAP((s)->start_block, d, 96, 64);\
++	SQUASHFS_SWAP((s)->fragment, d, 160, 32);\
++	SQUASHFS_SWAP((s)->offset, d, 192, 32);\
++	SQUASHFS_SWAP((s)->file_size, d, 224, 32);\
++}
++
++#define SQUASHFS_SWAP_LREG_INODE_HEADER(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
++			sizeof(struct squashfs_lreg_inode_header));\
++	SQUASHFS_SWAP((s)->nlink, d, 96, 32);\
++	SQUASHFS_SWAP((s)->start_block, d, 128, 64);\
++	SQUASHFS_SWAP((s)->fragment, d, 192, 32);\
++	SQUASHFS_SWAP((s)->offset, d, 224, 32);\
++	SQUASHFS_SWAP((s)->file_size, d, 256, 64);\
++}
++
++#define SQUASHFS_SWAP_DIR_INODE_HEADER(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
++			sizeof(struct squashfs_dir_inode_header));\
++	SQUASHFS_SWAP((s)->nlink, d, 96, 32);\
++	SQUASHFS_SWAP((s)->file_size, d, 128, 19);\
++	SQUASHFS_SWAP((s)->offset, d, 147, 13);\
++	SQUASHFS_SWAP((s)->start_block, d, 160, 32);\
++	SQUASHFS_SWAP((s)->parent_inode, d, 192, 32);\
++}
++
++#define SQUASHFS_SWAP_LDIR_INODE_HEADER(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
++			sizeof(struct squashfs_ldir_inode_header));\
++	SQUASHFS_SWAP((s)->nlink, d, 96, 32);\
++	SQUASHFS_SWAP((s)->file_size, d, 128, 27);\
++	SQUASHFS_SWAP((s)->offset, d, 155, 13);\
++	SQUASHFS_SWAP((s)->start_block, d, 168, 32);\
++	SQUASHFS_SWAP((s)->i_count, d, 200, 16);\
++	SQUASHFS_SWAP((s)->parent_inode, d, 216, 32);\
++}
++
++#define SQUASHFS_SWAP_DIR_INDEX(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_index));\
++	SQUASHFS_SWAP((s)->index, d, 0, 32);\
++	SQUASHFS_SWAP((s)->start_block, d, 32, 32);\
++	SQUASHFS_SWAP((s)->size, d, 64, 8);\
++}
++
++#define SQUASHFS_SWAP_DIR_HEADER(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_header));\
++	SQUASHFS_SWAP((s)->count, d, 0, 8);\
++	SQUASHFS_SWAP((s)->start_block, d, 8, 32);\
++	SQUASHFS_SWAP((s)->inode_number, d, 40, 32);\
++}
++
++#define SQUASHFS_SWAP_DIR_ENTRY(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_entry));\
++	SQUASHFS_SWAP((s)->offset, d, 0, 13);\
++	SQUASHFS_SWAP((s)->type, d, 13, 3);\
++	SQUASHFS_SWAP((s)->size, d, 16, 8);\
++	SQUASHFS_SWAP((s)->inode_number, d, 24, 16);\
++}
++
++#define SQUASHFS_SWAP_FRAGMENT_ENTRY(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_fragment_entry));\
++	SQUASHFS_SWAP((s)->start_block, d, 0, 64);\
++	SQUASHFS_SWAP((s)->size, d, 64, 32);\
++}
++
++#define SQUASHFS_SWAP_SHORTS(s, d, n) {\
++	int entry;\
++	int bit_position;\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_MEMSET(s, d, n * 2);\
++	for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \
++			16)\
++		SQUASHFS_SWAP(s[entry], d, bit_position, 16);\
++}
++
++#define SQUASHFS_SWAP_INTS(s, d, n) {\
++	int entry;\
++	int bit_position;\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_MEMSET(s, d, n * 4);\
++	for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \
++			32)\
++		SQUASHFS_SWAP(s[entry], d, bit_position, 32);\
++}
++
++#define SQUASHFS_SWAP_LONG_LONGS(s, d, n) {\
++	int entry;\
++	int bit_position;\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_MEMSET(s, d, n * 8);\
++	for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \
++			64)\
++		SQUASHFS_SWAP(s[entry], d, bit_position, 64);\
++}
++
++#define SQUASHFS_SWAP_DATA(s, d, n, bits) {\
++	int entry;\
++	int bit_position;\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_MEMSET(s, d, n * bits / 8);\
++	for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \
++			bits)\
++		SQUASHFS_SWAP(s[entry], d, bit_position, bits);\
++}
++
++#define SQUASHFS_SWAP_FRAGMENT_INDEXES(s, d, n) SQUASHFS_SWAP_LONG_LONGS(s, d, n)
++
++#ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY
++
++struct squashfs_base_inode_header_1 {
++	unsigned int		inode_type:4;
++	unsigned int		mode:12; /* protection */
++	unsigned int		uid:4; /* index into uid table */
++	unsigned int		guid:4; /* index into guid table */
++} __attribute__ ((packed));
++
++struct squashfs_ipc_inode_header_1 {
++	unsigned int		inode_type:4;
++	unsigned int		mode:12; /* protection */
++	unsigned int		uid:4; /* index into uid table */
++	unsigned int		guid:4; /* index into guid table */
++	unsigned int		type:4;
++	unsigned int		offset:4;
++} __attribute__ ((packed));
++
++struct squashfs_dev_inode_header_1 {
++	unsigned int		inode_type:4;
++	unsigned int		mode:12; /* protection */
++	unsigned int		uid:4; /* index into uid table */
++	unsigned int		guid:4; /* index into guid table */
++	unsigned short		rdev;
++} __attribute__ ((packed));
++
++struct squashfs_symlink_inode_header_1 {
++	unsigned int		inode_type:4;
++	unsigned int		mode:12; /* protection */
++	unsigned int		uid:4; /* index into uid table */
++	unsigned int		guid:4; /* index into guid table */
++	unsigned short		symlink_size;
++	char			symlink[0];
++} __attribute__ ((packed));
++
++struct squashfs_reg_inode_header_1 {
++	unsigned int		inode_type:4;
++	unsigned int		mode:12; /* protection */
++	unsigned int		uid:4; /* index into uid table */
++	unsigned int		guid:4; /* index into guid table */
++	unsigned int		mtime;
++	unsigned int		start_block;
++	unsigned int		file_size:32;
++	unsigned short		block_list[0];
++} __attribute__ ((packed));
++
++struct squashfs_dir_inode_header_1 {
++	unsigned int		inode_type:4;
++	unsigned int		mode:12; /* protection */
++	unsigned int		uid:4; /* index into uid table */
++	unsigned int		guid:4; /* index into guid table */
++	unsigned int		file_size:19;
++	unsigned int		offset:13;
++	unsigned int		mtime;
++	unsigned int		start_block:24;
++} __attribute__  ((packed));
++
++#define SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, n) \
++	SQUASHFS_MEMSET(s, d, n);\
++	SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\
++	SQUASHFS_SWAP((s)->mode, d, 4, 12);\
++	SQUASHFS_SWAP((s)->uid, d, 16, 4);\
++	SQUASHFS_SWAP((s)->guid, d, 20, 4);
++
++#define SQUASHFS_SWAP_BASE_INODE_HEADER_1(s, d, n) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, n)\
++}
++
++#define SQUASHFS_SWAP_IPC_INODE_HEADER_1(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \
++			sizeof(struct squashfs_ipc_inode_header_1));\
++	SQUASHFS_SWAP((s)->type, d, 24, 4);\
++	SQUASHFS_SWAP((s)->offset, d, 28, 4);\
++}
++
++#define SQUASHFS_SWAP_DEV_INODE_HEADER_1(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \
++			sizeof(struct squashfs_dev_inode_header_1));\
++	SQUASHFS_SWAP((s)->rdev, d, 24, 16);\
++}
++
++#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER_1(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \
++			sizeof(struct squashfs_symlink_inode_header_1));\
++	SQUASHFS_SWAP((s)->symlink_size, d, 24, 16);\
++}
++
++#define SQUASHFS_SWAP_REG_INODE_HEADER_1(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \
++			sizeof(struct squashfs_reg_inode_header_1));\
++	SQUASHFS_SWAP((s)->mtime, d, 24, 32);\
++	SQUASHFS_SWAP((s)->start_block, d, 56, 32);\
++	SQUASHFS_SWAP((s)->file_size, d, 88, 32);\
++}
++
++#define SQUASHFS_SWAP_DIR_INODE_HEADER_1(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \
++			sizeof(struct squashfs_dir_inode_header_1));\
++	SQUASHFS_SWAP((s)->file_size, d, 24, 19);\
++	SQUASHFS_SWAP((s)->offset, d, 43, 13);\
++	SQUASHFS_SWAP((s)->mtime, d, 56, 32);\
++	SQUASHFS_SWAP((s)->start_block, d, 88, 24);\
++}
++
++#endif
++
++#ifdef CONFIG_SQUASHFS_2_0_COMPATIBILITY
++
++struct squashfs_dir_index_2 {
++	unsigned int		index:27;
++	unsigned int		start_block:29;
++	unsigned char		size;
++	unsigned char		name[0];
++} __attribute__ ((packed));
++
++struct squashfs_base_inode_header_2 {
++	unsigned int		inode_type:4;
++	unsigned int		mode:12; /* protection */
++	unsigned int		uid:8; /* index into uid table */
++	unsigned int		guid:8; /* index into guid table */
++} __attribute__ ((packed));
++
++struct squashfs_ipc_inode_header_2 {
++	unsigned int		inode_type:4;
++	unsigned int		mode:12; /* protection */
++	unsigned int		uid:8; /* index into uid table */
++	unsigned int		guid:8; /* index into guid table */
++} __attribute__ ((packed));
++
++struct squashfs_dev_inode_header_2 {
++	unsigned int		inode_type:4;
++	unsigned int		mode:12; /* protection */
++	unsigned int		uid:8; /* index into uid table */
++	unsigned int		guid:8; /* index into guid table */
++	unsigned short		rdev;
++} __attribute__ ((packed));
++
++struct squashfs_symlink_inode_header_2 {
++	unsigned int		inode_type:4;
++	unsigned int		mode:12; /* protection */
++	unsigned int		uid:8; /* index into uid table */
++	unsigned int		guid:8; /* index into guid table */
++	unsigned short		symlink_size;
++	char			symlink[0];
++} __attribute__ ((packed));
++
++struct squashfs_reg_inode_header_2 {
++	unsigned int		inode_type:4;
++	unsigned int		mode:12; /* protection */
++	unsigned int		uid:8; /* index into uid table */
++	unsigned int		guid:8; /* index into guid table */
++	unsigned int		mtime;
++	unsigned int		start_block;
++	unsigned int		fragment;
++	unsigned int		offset;
++	unsigned int		file_size:32;
++	unsigned short		block_list[0];
++} __attribute__ ((packed));
++
++struct squashfs_dir_inode_header_2 {
++	unsigned int		inode_type:4;
++	unsigned int		mode:12; /* protection */
++	unsigned int		uid:8; /* index into uid table */
++	unsigned int		guid:8; /* index into guid table */
++	unsigned int		file_size:19;
++	unsigned int		offset:13;
++	unsigned int		mtime;
++	unsigned int		start_block:24;
++} __attribute__  ((packed));
++
++struct squashfs_ldir_inode_header_2 {
++	unsigned int		inode_type:4;
++	unsigned int		mode:12; /* protection */
++	unsigned int		uid:8; /* index into uid table */
++	unsigned int		guid:8; /* index into guid table */
++	unsigned int		file_size:27;
++	unsigned int		offset:13;
++	unsigned int		mtime;
++	unsigned int		start_block:24;
++	unsigned int		i_count:16;
++	struct squashfs_dir_index_2	index[0];
++} __attribute__  ((packed));
++
++union squashfs_inode_header_2 {
++	struct squashfs_base_inode_header_2	base;
++	struct squashfs_dev_inode_header_2	dev;
++	struct squashfs_symlink_inode_header_2	symlink;
++	struct squashfs_reg_inode_header_2	reg;
++	struct squashfs_dir_inode_header_2	dir;
++	struct squashfs_ldir_inode_header_2	ldir;
++	struct squashfs_ipc_inode_header_2	ipc;
++};
++
++struct squashfs_dir_header_2 {
++	unsigned int		count:8;
++	unsigned int		start_block:24;
++} __attribute__ ((packed));
++
++struct squashfs_dir_entry_2 {
++	unsigned int		offset:13;
++	unsigned int		type:3;
++	unsigned int		size:8;
++	char			name[0];
++} __attribute__ ((packed));
++
++struct squashfs_fragment_entry_2 {
++	unsigned int		start_block;
++	unsigned int		size;
++} __attribute__ ((packed));
++
++#define SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, n)\
++	SQUASHFS_MEMSET(s, d, n);\
++	SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\
++	SQUASHFS_SWAP((s)->mode, d, 4, 12);\
++	SQUASHFS_SWAP((s)->uid, d, 16, 8);\
++	SQUASHFS_SWAP((s)->guid, d, 24, 8);\
++
++#define SQUASHFS_SWAP_BASE_INODE_HEADER_2(s, d, n) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, n)\
++}
++
++#define SQUASHFS_SWAP_IPC_INODE_HEADER_2(s, d) \
++	SQUASHFS_SWAP_BASE_INODE_HEADER_2(s, d, sizeof(struct squashfs_ipc_inode_header_2))
++
++#define SQUASHFS_SWAP_DEV_INODE_HEADER_2(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \
++			sizeof(struct squashfs_dev_inode_header_2)); \
++	SQUASHFS_SWAP((s)->rdev, d, 32, 16);\
++}
++
++#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER_2(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \
++			sizeof(struct squashfs_symlink_inode_header_2));\
++	SQUASHFS_SWAP((s)->symlink_size, d, 32, 16);\
++}
++
++#define SQUASHFS_SWAP_REG_INODE_HEADER_2(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \
++			sizeof(struct squashfs_reg_inode_header_2));\
++	SQUASHFS_SWAP((s)->mtime, d, 32, 32);\
++	SQUASHFS_SWAP((s)->start_block, d, 64, 32);\
++	SQUASHFS_SWAP((s)->fragment, d, 96, 32);\
++	SQUASHFS_SWAP((s)->offset, d, 128, 32);\
++	SQUASHFS_SWAP((s)->file_size, d, 160, 32);\
++}
++
++#define SQUASHFS_SWAP_DIR_INODE_HEADER_2(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \
++			sizeof(struct squashfs_dir_inode_header_2));\
++	SQUASHFS_SWAP((s)->file_size, d, 32, 19);\
++	SQUASHFS_SWAP((s)->offset, d, 51, 13);\
++	SQUASHFS_SWAP((s)->mtime, d, 64, 32);\
++	SQUASHFS_SWAP((s)->start_block, d, 96, 24);\
++}
++
++#define SQUASHFS_SWAP_LDIR_INODE_HEADER_2(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \
++			sizeof(struct squashfs_ldir_inode_header_2));\
++	SQUASHFS_SWAP((s)->file_size, d, 32, 27);\
++	SQUASHFS_SWAP((s)->offset, d, 59, 13);\
++	SQUASHFS_SWAP((s)->mtime, d, 72, 32);\
++	SQUASHFS_SWAP((s)->start_block, d, 104, 24);\
++	SQUASHFS_SWAP((s)->i_count, d, 128, 16);\
++}
++
++#define SQUASHFS_SWAP_DIR_INDEX_2(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_index_2));\
++	SQUASHFS_SWAP((s)->index, d, 0, 27);\
++	SQUASHFS_SWAP((s)->start_block, d, 27, 29);\
++	SQUASHFS_SWAP((s)->size, d, 56, 8);\
++}
++#define SQUASHFS_SWAP_DIR_HEADER_2(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_header_2));\
++	SQUASHFS_SWAP((s)->count, d, 0, 8);\
++	SQUASHFS_SWAP((s)->start_block, d, 8, 24);\
++}
++
++#define SQUASHFS_SWAP_DIR_ENTRY_2(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_entry_2));\
++	SQUASHFS_SWAP((s)->offset, d, 0, 13);\
++	SQUASHFS_SWAP((s)->type, d, 13, 3);\
++	SQUASHFS_SWAP((s)->size, d, 16, 8);\
++}
++
++#define SQUASHFS_SWAP_FRAGMENT_ENTRY_2(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_fragment_entry_2));\
++	SQUASHFS_SWAP((s)->start_block, d, 0, 32);\
++	SQUASHFS_SWAP((s)->size, d, 32, 32);\
++}
++
++#define SQUASHFS_SWAP_FRAGMENT_INDEXES_2(s, d, n) SQUASHFS_SWAP_INTS(s, d, n)
++
++/* fragment and fragment table defines */
++#define SQUASHFS_FRAGMENT_BYTES_2(A)	(A * sizeof(struct squashfs_fragment_entry_2))
++
++#define SQUASHFS_FRAGMENT_INDEX_2(A)	(SQUASHFS_FRAGMENT_BYTES_2(A) / \
++					SQUASHFS_METADATA_SIZE)
++
++#define SQUASHFS_FRAGMENT_INDEX_OFFSET_2(A)	(SQUASHFS_FRAGMENT_BYTES_2(A) % \
++						SQUASHFS_METADATA_SIZE)
++
++#define SQUASHFS_FRAGMENT_INDEXES_2(A)	((SQUASHFS_FRAGMENT_BYTES_2(A) + \
++					SQUASHFS_METADATA_SIZE - 1) / \
++					SQUASHFS_METADATA_SIZE)
++
++#define SQUASHFS_FRAGMENT_INDEX_BYTES_2(A)	(SQUASHFS_FRAGMENT_INDEXES_2(A) *\
++						sizeof(int))
++
++#endif
++
++#ifdef __KERNEL__
++
++/*
++ * macros used to swap each structure entry, taking into account
++ * bitfields and different bitfield placing conventions on differing
++ * architectures
++ */
++
++#include <asm/byteorder.h>
++
++#ifdef __BIG_ENDIAN
++	/* convert from little endian to big endian */
++#define SQUASHFS_SWAP(value, p, pos, tbits) _SQUASHFS_SWAP(value, p, pos, \
++		tbits, b_pos)
++#else
++	/* convert from big endian to little endian */
++#define SQUASHFS_SWAP(value, p, pos, tbits) _SQUASHFS_SWAP(value, p, pos, \
++		tbits, 64 - tbits - b_pos)
++#endif
++
++#define _SQUASHFS_SWAP(value, p, pos, tbits, SHIFT) {\
++	b_pos = pos % 8;\
++	val = 0;\
++	s = (unsigned char *)p + (pos / 8);\
++	d = ((unsigned char *) &val) + 7;\
++	for(bits = 0; bits < (tbits + b_pos); bits += 8) \
++		*d-- = *s++;\
++	value = (val >> (SHIFT))/* & ((1 << tbits) - 1)*/;\
++}
++
++#define SQUASHFS_MEMSET(s, d, n)	memset(s, 0, n);
++
++#endif
++#endif
+--- /dev/null
++++ b/include/linux/squashfs_fs_i.h
+@@ -0,0 +1,45 @@
++#ifndef SQUASHFS_FS_I
++#define SQUASHFS_FS_I
++/*
++ * Squashfs
++ *
++ * Copyright (c) 2002, 2003, 2004, 2005, 2006
++ * Phillip Lougher <phillip@lougher.org.uk>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2,
++ * or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * squashfs_fs_i.h
++ */
++
++struct squashfs_inode_info {
++	long long	start_block;
++	unsigned int	offset;
++	union {
++		struct {
++			long long	fragment_start_block;
++			unsigned int	fragment_size;
++			unsigned int	fragment_offset;
++			long long	block_list_start;
++		} s1;
++		struct {
++			long long	directory_index_start;
++			unsigned int	directory_index_offset;
++			unsigned int	directory_index_count;
++			unsigned int	parent_inode;
++		} s2;
++	} u;
++	struct inode	vfs_inode;
++};
++#endif
+--- /dev/null
++++ b/include/linux/squashfs_fs_sb.h
+@@ -0,0 +1,74 @@
++#ifndef SQUASHFS_FS_SB
++#define SQUASHFS_FS_SB
++/*
++ * Squashfs
++ *
++ * Copyright (c) 2002, 2003, 2004, 2005, 2006
++ * Phillip Lougher <phillip@lougher.org.uk>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2,
++ * or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * squashfs_fs_sb.h
++ */
++
++#include <linux/squashfs_fs.h>
++
++struct squashfs_cache {
++	long long	block;
++	int		length;
++	long long	next_index;
++	char		*data;
++};
++
++struct squashfs_fragment_cache {
++	long long	block;
++	int		length;
++	unsigned int	locked;
++	char		*data;
++};
++
++struct squashfs_sb_info {
++	struct squashfs_super_block	sblk;
++	int			devblksize;
++	int			devblksize_log2;
++	int			swap;
++	struct squashfs_cache	*block_cache;
++	struct squashfs_fragment_cache	*fragment;
++	int			next_cache;
++	int			next_fragment;
++	int			next_meta_index;
++	unsigned int		*uid;
++	unsigned int		*guid;
++	long long		*fragment_index;
++	unsigned int		*fragment_index_2;
++	unsigned int		read_size;
++	char			*read_data;
++	char			*read_page;
++	struct semaphore	read_data_mutex;
++	struct semaphore	read_page_mutex;
++	struct semaphore	block_cache_mutex;
++	struct semaphore	fragment_mutex;
++	struct semaphore	meta_index_mutex;
++	wait_queue_head_t	waitq;
++	wait_queue_head_t	fragment_wait_queue;
++	struct meta_index	*meta_index;
++	struct inode		*(*iget)(struct super_block *s,  squashfs_inode_t \
++				inode);
++	long long		(*read_blocklist)(struct inode *inode, int \
++				index, int readahead_blks, char *block_list, \
++				unsigned short **block_p, unsigned int *bsize);
++	int			(*read_fragment_index_table)(struct super_block *s);
++};
++#endif
+--- a/init/do_mounts_rd.c
++++ b/init/do_mounts_rd.c
+@@ -5,6 +5,7 @@
+ #include <linux/ext2_fs.h>
+ #include <linux/romfs_fs.h>
+ #include <linux/cramfs_fs.h>
++#include <linux/squashfs_fs.h>
+ #include <linux/initrd.h>
+ #include <linux/string.h>
+ 
+@@ -39,6 +40,7 @@ static int __init crd_load(int in_fd, in
+  * numbers could not be found.
+  *
+  * We currently check for the following magic numbers:
++ *      squashfs
+  * 	minix
+  * 	ext2
+  *	romfs
+@@ -53,6 +55,7 @@ identify_ramdisk_image(int fd, int start
+ 	struct ext2_super_block *ext2sb;
+ 	struct romfs_super_block *romfsb;
+ 	struct cramfs_super *cramfsb;
++	struct squashfs_super_block *squashfsb;
+ 	int nblocks = -1;
+ 	unsigned char *buf;
+ 
+@@ -64,6 +67,7 @@ identify_ramdisk_image(int fd, int start
+ 	ext2sb = (struct ext2_super_block *) buf;
+ 	romfsb = (struct romfs_super_block *) buf;
+ 	cramfsb = (struct cramfs_super *) buf;
++	squashfsb = (struct squashfs_super_block *) buf;
+ 	memset(buf, 0xe5, size);
+ 
+ 	/*
+@@ -101,6 +105,15 @@ identify_ramdisk_image(int fd, int start
+ 		goto done;
+ 	}
+ 
++	/* squashfs is at block zero too */
++	if (squashfsb->s_magic == SQUASHFS_MAGIC) {
++		printk(KERN_NOTICE
++		       "RAMDISK: squashfs filesystem found at block %d\n",
++		       start_block);
++		nblocks = (squashfsb->bytes_used+BLOCK_SIZE-1)>>BLOCK_SIZE_BITS;
++		goto done;
++	}
++
+ 	/*
+ 	 * Read block 1 to test for minix and ext2 superblock
+ 	 */
diff --git a/target/linux/generic/patches-2.6.25/002-lzma_decompress.patch b/target/linux/generic/patches-2.6.25/002-lzma_decompress.patch
new file mode 100644
index 0000000000..939e0a9e32
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/002-lzma_decompress.patch
@@ -0,0 +1,780 @@
+--- /dev/null
++++ b/include/linux/LzmaDecode.h
+@@ -0,0 +1,100 @@
++/*
++  LzmaDecode.h
++  LZMA Decoder interface
++
++  LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25)
++  http://www.7-zip.org/
++
++  LZMA SDK is licensed under two licenses:
++  1) GNU Lesser General Public License (GNU LGPL)
++  2) Common Public License (CPL)
++  It means that you can select one of these two licenses and
++  follow rules of that license.
++
++  SPECIAL EXCEPTION:
++  Igor Pavlov, as the author of this code, expressly permits you to
++  statically or dynamically link your code (or bind by name) to the
++  interfaces of this file without subjecting your linked code to the
++  terms of the CPL or GNU LGPL. Any modifications or additions
++  to this file, however, are subject to the LGPL or CPL terms.
++*/
++
++#ifndef __LZMADECODE_H
++#define __LZMADECODE_H
++
++/* #define _LZMA_IN_CB */
++/* Use callback for input data */
++
++/* #define _LZMA_OUT_READ */
++/* Use read function for output data */
++
++/* #define _LZMA_PROB32 */
++/* It can increase speed on some 32-bit CPUs,
++   but memory usage will be doubled in that case */
++
++/* #define _LZMA_LOC_OPT */
++/* Enable local speed optimizations inside code */
++
++#ifndef UInt32
++#ifdef _LZMA_UINT32_IS_ULONG
++#define UInt32 unsigned long
++#else
++#define UInt32 unsigned int
++#endif
++#endif
++
++#ifdef _LZMA_PROB32
++#define CProb UInt32
++#else
++#define CProb unsigned short
++#endif
++
++#define LZMA_RESULT_OK 0
++#define LZMA_RESULT_DATA_ERROR 1
++#define LZMA_RESULT_NOT_ENOUGH_MEM 2
++
++#ifdef _LZMA_IN_CB
++typedef struct _ILzmaInCallback
++{
++  int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize);
++} ILzmaInCallback;
++#endif
++
++#define LZMA_BASE_SIZE 1846
++#define LZMA_LIT_SIZE 768
++
++/*
++bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb)
++bufferSize += 100 in case of _LZMA_OUT_READ
++by default CProb is unsigned short,
++but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int)
++*/
++
++#ifdef _LZMA_OUT_READ
++int LzmaDecoderInit(
++    unsigned char *buffer, UInt32 bufferSize,
++    int lc, int lp, int pb,
++    unsigned char *dictionary, UInt32 dictionarySize,
++  #ifdef _LZMA_IN_CB
++    ILzmaInCallback *inCallback
++  #else
++    unsigned char *inStream, UInt32 inSize
++  #endif
++);
++#endif
++
++int LzmaDecode(
++    unsigned char *buffer,
++  #ifndef _LZMA_OUT_READ
++    UInt32 bufferSize,
++    int lc, int lp, int pb,
++  #ifdef _LZMA_IN_CB
++    ILzmaInCallback *inCallback,
++  #else
++    unsigned char *inStream, UInt32 inSize,
++  #endif
++  #endif
++    unsigned char *outStream, UInt32 outSize,
++    UInt32 *outSizeProcessed);
++
++#endif
+--- /dev/null
++++ b/lib/LzmaDecode.c
+@@ -0,0 +1,663 @@
++/*
++  LzmaDecode.c
++  LZMA Decoder
++
++  LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25)
++  http://www.7-zip.org/
++
++  LZMA SDK is licensed under two licenses:
++  1) GNU Lesser General Public License (GNU LGPL)
++  2) Common Public License (CPL)
++  It means that you can select one of these two licenses and
++  follow rules of that license.
++
++  SPECIAL EXCEPTION:
++  Igor Pavlov, as the author of this code, expressly permits you to
++  statically or dynamically link your code (or bind by name) to the
++  interfaces of this file without subjecting your linked code to the
++  terms of the CPL or GNU LGPL. Any modifications or additions
++  to this file, however, are subject to the LGPL or CPL terms.
++*/
++
++#include <linux/LzmaDecode.h>
++
++#ifndef Byte
++#define Byte unsigned char
++#endif
++
++#define kNumTopBits 24
++#define kTopValue ((UInt32)1 << kNumTopBits)
++
++#define kNumBitModelTotalBits 11
++#define kBitModelTotal (1 << kNumBitModelTotalBits)
++#define kNumMoveBits 5
++
++typedef struct _CRangeDecoder
++{
++  Byte *Buffer;
++  Byte *BufferLim;
++  UInt32 Range;
++  UInt32 Code;
++  #ifdef _LZMA_IN_CB
++  ILzmaInCallback *InCallback;
++  int Result;
++  #endif
++  int ExtraBytes;
++} CRangeDecoder;
++
++Byte RangeDecoderReadByte(CRangeDecoder *rd)
++{
++  if (rd->Buffer == rd->BufferLim)
++  {
++    #ifdef _LZMA_IN_CB
++    UInt32 size;
++    rd->Result = rd->InCallback->Read(rd->InCallback, &rd->Buffer, &size);
++    rd->BufferLim = rd->Buffer + size;
++    if (size == 0)
++    #endif
++    {
++      rd->ExtraBytes = 1;
++      return 0xFF;
++    }
++  }
++  return (*rd->Buffer++);
++}
++
++/* #define ReadByte (*rd->Buffer++) */
++#define ReadByte (RangeDecoderReadByte(rd))
++
++void RangeDecoderInit(CRangeDecoder *rd,
++  #ifdef _LZMA_IN_CB
++    ILzmaInCallback *inCallback
++  #else
++    Byte *stream, UInt32 bufferSize
++  #endif
++    )
++{
++  int i;
++  #ifdef _LZMA_IN_CB
++  rd->InCallback = inCallback;
++  rd->Buffer = rd->BufferLim = 0;
++  #else
++  rd->Buffer = stream;
++  rd->BufferLim = stream + bufferSize;
++  #endif
++  rd->ExtraBytes = 0;
++  rd->Code = 0;
++  rd->Range = (0xFFFFFFFF);
++  for(i = 0; i < 5; i++)
++    rd->Code = (rd->Code << 8) | ReadByte;
++}
++
++#define RC_INIT_VAR UInt32 range = rd->Range; UInt32 code = rd->Code;
++#define RC_FLUSH_VAR rd->Range = range; rd->Code = code;
++#define RC_NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | ReadByte; }
++
++UInt32 RangeDecoderDecodeDirectBits(CRangeDecoder *rd, int numTotalBits)
++{
++  RC_INIT_VAR
++  UInt32 result = 0;
++  int i;
++  for (i = numTotalBits; i > 0; i--)
++  {
++    /* UInt32 t; */
++    range >>= 1;
++
++    result <<= 1;
++    if (code >= range)
++    {
++      code -= range;
++      result |= 1;
++    }
++    /*
++    t = (code - range) >> 31;
++    t &= 1;
++    code -= range & (t - 1);
++    result = (result + result) | (1 - t);
++    */
++    RC_NORMALIZE
++  }
++  RC_FLUSH_VAR
++  return result;
++}
++
++int RangeDecoderBitDecode(CProb *prob, CRangeDecoder *rd)
++{
++  UInt32 bound = (rd->Range >> kNumBitModelTotalBits) * *prob;
++  if (rd->Code < bound)
++  {
++    rd->Range = bound;
++    *prob += (kBitModelTotal - *prob) >> kNumMoveBits;
++    if (rd->Range < kTopValue)
++    {
++      rd->Code = (rd->Code << 8) | ReadByte;
++      rd->Range <<= 8;
++    }
++    return 0;
++  }
++  else
++  {
++    rd->Range -= bound;
++    rd->Code -= bound;
++    *prob -= (*prob) >> kNumMoveBits;
++    if (rd->Range < kTopValue)
++    {
++      rd->Code = (rd->Code << 8) | ReadByte;
++      rd->Range <<= 8;
++    }
++    return 1;
++  }
++}
++
++#define RC_GET_BIT2(prob, mi, A0, A1) \
++  UInt32 bound = (range >> kNumBitModelTotalBits) * *prob; \
++  if (code < bound) \
++    { A0; range = bound; *prob += (kBitModelTotal - *prob) >> kNumMoveBits; mi <<= 1; } \
++  else \
++    { A1; range -= bound; code -= bound; *prob -= (*prob) >> kNumMoveBits; mi = (mi + mi) + 1; } \
++  RC_NORMALIZE
++
++#define RC_GET_BIT(prob, mi) RC_GET_BIT2(prob, mi, ; , ;)
++
++int RangeDecoderBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd)
++{
++  int mi = 1;
++  int i;
++  #ifdef _LZMA_LOC_OPT
++  RC_INIT_VAR
++  #endif
++  for(i = numLevels; i > 0; i--)
++  {
++    #ifdef _LZMA_LOC_OPT
++    CProb *prob = probs + mi;
++    RC_GET_BIT(prob, mi)
++    #else
++    mi = (mi + mi) + RangeDecoderBitDecode(probs + mi, rd);
++    #endif
++  }
++  #ifdef _LZMA_LOC_OPT
++  RC_FLUSH_VAR
++  #endif
++  return mi - (1 << numLevels);
++}
++
++int RangeDecoderReverseBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd)
++{
++  int mi = 1;
++  int i;
++  int symbol = 0;
++  #ifdef _LZMA_LOC_OPT
++  RC_INIT_VAR
++  #endif
++  for(i = 0; i < numLevels; i++)
++  {
++    #ifdef _LZMA_LOC_OPT
++    CProb *prob = probs + mi;
++    RC_GET_BIT2(prob, mi, ; , symbol |= (1 << i))
++    #else
++    int bit = RangeDecoderBitDecode(probs + mi, rd);
++    mi = mi + mi + bit;
++    symbol |= (bit << i);
++    #endif
++  }
++  #ifdef _LZMA_LOC_OPT
++  RC_FLUSH_VAR
++  #endif
++  return symbol;
++}
++
++Byte LzmaLiteralDecode(CProb *probs, CRangeDecoder *rd)
++{
++  int symbol = 1;
++  #ifdef _LZMA_LOC_OPT
++  RC_INIT_VAR
++  #endif
++  do
++  {
++    #ifdef _LZMA_LOC_OPT
++    CProb *prob = probs + symbol;
++    RC_GET_BIT(prob, symbol)
++    #else
++    symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd);
++    #endif
++  }
++  while (symbol < 0x100);
++  #ifdef _LZMA_LOC_OPT
++  RC_FLUSH_VAR
++  #endif
++  return symbol;
++}
++
++Byte LzmaLiteralDecodeMatch(CProb *probs, CRangeDecoder *rd, Byte matchByte)
++{
++  int symbol = 1;
++  #ifdef _LZMA_LOC_OPT
++  RC_INIT_VAR
++  #endif
++  do
++  {
++    int bit;
++    int matchBit = (matchByte >> 7) & 1;
++    matchByte <<= 1;
++    #ifdef _LZMA_LOC_OPT
++    {
++      CProb *prob = probs + ((1 + matchBit) << 8) + symbol;
++      RC_GET_BIT2(prob, symbol, bit = 0, bit = 1)
++    }
++    #else
++    bit = RangeDecoderBitDecode(probs + ((1 + matchBit) << 8) + symbol, rd);
++    symbol = (symbol << 1) | bit;
++    #endif
++    if (matchBit != bit)
++    {
++      while (symbol < 0x100)
++      {
++        #ifdef _LZMA_LOC_OPT
++        CProb *prob = probs + symbol;
++        RC_GET_BIT(prob, symbol)
++        #else
++        symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd);
++        #endif
++      }
++      break;
++    }
++  }
++  while (symbol < 0x100);
++  #ifdef _LZMA_LOC_OPT
++  RC_FLUSH_VAR
++  #endif
++  return symbol;
++}
++
++#define kNumPosBitsMax 4
++#define kNumPosStatesMax (1 << kNumPosBitsMax)
++
++#define kLenNumLowBits 3
++#define kLenNumLowSymbols (1 << kLenNumLowBits)
++#define kLenNumMidBits 3
++#define kLenNumMidSymbols (1 << kLenNumMidBits)
++#define kLenNumHighBits 8
++#define kLenNumHighSymbols (1 << kLenNumHighBits)
++
++#define LenChoice 0
++#define LenChoice2 (LenChoice + 1)
++#define LenLow (LenChoice2 + 1)
++#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
++#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
++#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
++
++int LzmaLenDecode(CProb *p, CRangeDecoder *rd, int posState)
++{
++  if(RangeDecoderBitDecode(p + LenChoice, rd) == 0)
++    return RangeDecoderBitTreeDecode(p + LenLow +
++        (posState << kLenNumLowBits), kLenNumLowBits, rd);
++  if(RangeDecoderBitDecode(p + LenChoice2, rd) == 0)
++    return kLenNumLowSymbols + RangeDecoderBitTreeDecode(p + LenMid +
++        (posState << kLenNumMidBits), kLenNumMidBits, rd);
++  return kLenNumLowSymbols + kLenNumMidSymbols +
++      RangeDecoderBitTreeDecode(p + LenHigh, kLenNumHighBits, rd);
++}
++
++#define kNumStates 12
++
++#define kStartPosModelIndex 4
++#define kEndPosModelIndex 14
++#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
++
++#define kNumPosSlotBits 6
++#define kNumLenToPosStates 4
++
++#define kNumAlignBits 4
++#define kAlignTableSize (1 << kNumAlignBits)
++
++#define kMatchMinLen 2
++
++#define IsMatch 0
++#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
++#define IsRepG0 (IsRep + kNumStates)
++#define IsRepG1 (IsRepG0 + kNumStates)
++#define IsRepG2 (IsRepG1 + kNumStates)
++#define IsRep0Long (IsRepG2 + kNumStates)
++#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
++#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
++#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
++#define LenCoder (Align + kAlignTableSize)
++#define RepLenCoder (LenCoder + kNumLenProbs)
++#define Literal (RepLenCoder + kNumLenProbs)
++
++#if Literal != LZMA_BASE_SIZE
++StopCompilingDueBUG
++#endif
++
++#ifdef _LZMA_OUT_READ
++
++typedef struct _LzmaVarState
++{
++  CRangeDecoder RangeDecoder;
++  Byte *Dictionary;
++  UInt32 DictionarySize;
++  UInt32 DictionaryPos;
++  UInt32 GlobalPos;
++  UInt32 Reps[4];
++  int lc;
++  int lp;
++  int pb;
++  int State;
++  int PreviousIsMatch;
++  int RemainLen;
++} LzmaVarState;
++
++int LzmaDecoderInit(
++    unsigned char *buffer, UInt32 bufferSize,
++    int lc, int lp, int pb,
++    unsigned char *dictionary, UInt32 dictionarySize,
++    #ifdef _LZMA_IN_CB
++    ILzmaInCallback *inCallback
++    #else
++    unsigned char *inStream, UInt32 inSize
++    #endif
++    )
++{
++  LzmaVarState *vs = (LzmaVarState *)buffer;
++  CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
++  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
++  UInt32 i;
++  if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState))
++    return LZMA_RESULT_NOT_ENOUGH_MEM;
++  vs->Dictionary = dictionary;
++  vs->DictionarySize = dictionarySize;
++  vs->DictionaryPos = 0;
++  vs->GlobalPos = 0;
++  vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1;
++  vs->lc = lc;
++  vs->lp = lp;
++  vs->pb = pb;
++  vs->State = 0;
++  vs->PreviousIsMatch = 0;
++  vs->RemainLen = 0;
++  dictionary[dictionarySize - 1] = 0;
++  for (i = 0; i < numProbs; i++)
++    p[i] = kBitModelTotal >> 1;
++  RangeDecoderInit(&vs->RangeDecoder,
++      #ifdef _LZMA_IN_CB
++      inCallback
++      #else
++      inStream, inSize
++      #endif
++  );
++  return LZMA_RESULT_OK;
++}
++
++int LzmaDecode(unsigned char *buffer,
++    unsigned char *outStream, UInt32 outSize,
++    UInt32 *outSizeProcessed)
++{
++  LzmaVarState *vs = (LzmaVarState *)buffer;
++  CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
++  CRangeDecoder rd = vs->RangeDecoder;
++  int state = vs->State;
++  int previousIsMatch = vs->PreviousIsMatch;
++  Byte previousByte;
++  UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
++  UInt32 nowPos = 0;
++  UInt32 posStateMask = (1 << (vs->pb)) - 1;
++  UInt32 literalPosMask = (1 << (vs->lp)) - 1;
++  int lc = vs->lc;
++  int len = vs->RemainLen;
++  UInt32 globalPos = vs->GlobalPos;
++
++  Byte *dictionary = vs->Dictionary;
++  UInt32 dictionarySize = vs->DictionarySize;
++  UInt32 dictionaryPos = vs->DictionaryPos;
++
++  if (len == -1)
++  {
++    *outSizeProcessed = 0;
++    return LZMA_RESULT_OK;
++  }
++
++  while(len > 0 && nowPos < outSize)
++  {
++    UInt32 pos = dictionaryPos - rep0;
++    if (pos >= dictionarySize)
++      pos += dictionarySize;
++    outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
++    if (++dictionaryPos == dictionarySize)
++      dictionaryPos = 0;
++    len--;
++  }
++  if (dictionaryPos == 0)
++    previousByte = dictionary[dictionarySize - 1];
++  else
++    previousByte = dictionary[dictionaryPos - 1];
++#else
++
++int LzmaDecode(
++    Byte *buffer, UInt32 bufferSize,
++    int lc, int lp, int pb,
++    #ifdef _LZMA_IN_CB
++    ILzmaInCallback *inCallback,
++    #else
++    unsigned char *inStream, UInt32 inSize,
++    #endif
++    unsigned char *outStream, UInt32 outSize,
++    UInt32 *outSizeProcessed)
++{
++  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
++  CProb *p = (CProb *)buffer;
++  CRangeDecoder rd;
++  UInt32 i;
++  int state = 0;
++  int previousIsMatch = 0;
++  Byte previousByte = 0;
++  UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
++  UInt32 nowPos = 0;
++  UInt32 posStateMask = (1 << pb) - 1;
++  UInt32 literalPosMask = (1 << lp) - 1;
++  int len = 0;
++  if (bufferSize < numProbs * sizeof(CProb))
++    return LZMA_RESULT_NOT_ENOUGH_MEM;
++  for (i = 0; i < numProbs; i++)
++    p[i] = kBitModelTotal >> 1;
++  RangeDecoderInit(&rd,
++      #ifdef _LZMA_IN_CB
++      inCallback
++      #else
++      inStream, inSize
++      #endif
++      );
++#endif
++
++  *outSizeProcessed = 0;
++  while(nowPos < outSize)
++  {
++    int posState = (int)(
++        (nowPos
++        #ifdef _LZMA_OUT_READ
++        + globalPos
++        #endif
++        )
++        & posStateMask);
++    #ifdef _LZMA_IN_CB
++    if (rd.Result != LZMA_RESULT_OK)
++      return rd.Result;
++    #endif
++    if (rd.ExtraBytes != 0)
++      return LZMA_RESULT_DATA_ERROR;
++    if (RangeDecoderBitDecode(p + IsMatch + (state << kNumPosBitsMax) + posState, &rd) == 0)
++    {
++      CProb *probs = p + Literal + (LZMA_LIT_SIZE *
++        (((
++        (nowPos
++        #ifdef _LZMA_OUT_READ
++        + globalPos
++        #endif
++        )
++        & literalPosMask) << lc) + (previousByte >> (8 - lc))));
++
++      if (state < 4) state = 0;
++      else if (state < 10) state -= 3;
++      else state -= 6;
++      if (previousIsMatch)
++      {
++        Byte matchByte;
++        #ifdef _LZMA_OUT_READ
++        UInt32 pos = dictionaryPos - rep0;
++        if (pos >= dictionarySize)
++          pos += dictionarySize;
++        matchByte = dictionary[pos];
++        #else
++        matchByte = outStream[nowPos - rep0];
++        #endif
++        previousByte = LzmaLiteralDecodeMatch(probs, &rd, matchByte);
++        previousIsMatch = 0;
++      }
++      else
++        previousByte = LzmaLiteralDecode(probs, &rd);
++      outStream[nowPos++] = previousByte;
++      #ifdef _LZMA_OUT_READ
++      dictionary[dictionaryPos] = previousByte;
++      if (++dictionaryPos == dictionarySize)
++        dictionaryPos = 0;
++      #endif
++    }
++    else
++    {
++      previousIsMatch = 1;
++      if (RangeDecoderBitDecode(p + IsRep + state, &rd) == 1)
++      {
++        if (RangeDecoderBitDecode(p + IsRepG0 + state, &rd) == 0)
++        {
++          if (RangeDecoderBitDecode(p + IsRep0Long + (state << kNumPosBitsMax) + posState, &rd) == 0)
++          {
++            #ifdef _LZMA_OUT_READ
++            UInt32 pos;
++            #endif
++            if (
++               (nowPos
++                #ifdef _LZMA_OUT_READ
++                + globalPos
++                #endif
++               )
++               == 0)
++              return LZMA_RESULT_DATA_ERROR;
++            state = state < 7 ? 9 : 11;
++            #ifdef _LZMA_OUT_READ
++            pos = dictionaryPos - rep0;
++            if (pos >= dictionarySize)
++              pos += dictionarySize;
++            previousByte = dictionary[pos];
++            dictionary[dictionaryPos] = previousByte;
++            if (++dictionaryPos == dictionarySize)
++              dictionaryPos = 0;
++            #else
++            previousByte = outStream[nowPos - rep0];
++            #endif
++            outStream[nowPos++] = previousByte;
++            continue;
++          }
++        }
++        else
++        {
++          UInt32 distance;
++          if(RangeDecoderBitDecode(p + IsRepG1 + state, &rd) == 0)
++            distance = rep1;
++          else
++          {
++            if(RangeDecoderBitDecode(p + IsRepG2 + state, &rd) == 0)
++              distance = rep2;
++            else
++            {
++              distance = rep3;
++              rep3 = rep2;
++            }
++            rep2 = rep1;
++          }
++          rep1 = rep0;
++          rep0 = distance;
++        }
++        len = LzmaLenDecode(p + RepLenCoder, &rd, posState);
++        state = state < 7 ? 8 : 11;
++      }
++      else
++      {
++        int posSlot;
++        rep3 = rep2;
++        rep2 = rep1;
++        rep1 = rep0;
++        state = state < 7 ? 7 : 10;
++        len = LzmaLenDecode(p + LenCoder, &rd, posState);
++        posSlot = RangeDecoderBitTreeDecode(p + PosSlot +
++            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
++            kNumPosSlotBits), kNumPosSlotBits, &rd);
++        if (posSlot >= kStartPosModelIndex)
++        {
++          int numDirectBits = ((posSlot >> 1) - 1);
++          rep0 = ((2 | ((UInt32)posSlot & 1)) << numDirectBits);
++          if (posSlot < kEndPosModelIndex)
++          {
++            rep0 += RangeDecoderReverseBitTreeDecode(
++                p + SpecPos + rep0 - posSlot - 1, numDirectBits, &rd);
++          }
++          else
++          {
++            rep0 += RangeDecoderDecodeDirectBits(&rd,
++                numDirectBits - kNumAlignBits) << kNumAlignBits;
++            rep0 += RangeDecoderReverseBitTreeDecode(p + Align, kNumAlignBits, &rd);
++          }
++        }
++        else
++          rep0 = posSlot;
++        rep0++;
++      }
++      if (rep0 == (UInt32)(0))
++      {
++        /* it's for stream version */
++        len = -1;
++        break;
++      }
++      if (rep0 > nowPos
++        #ifdef _LZMA_OUT_READ
++        + globalPos
++        #endif
++        )
++      {
++        return LZMA_RESULT_DATA_ERROR;
++      }
++      len += kMatchMinLen;
++      do
++      {
++        #ifdef _LZMA_OUT_READ
++        UInt32 pos = dictionaryPos - rep0;
++        if (pos >= dictionarySize)
++          pos += dictionarySize;
++        previousByte = dictionary[pos];
++        dictionary[dictionaryPos] = previousByte;
++        if (++dictionaryPos == dictionarySize)
++          dictionaryPos = 0;
++        #else
++        previousByte = outStream[nowPos - rep0];
++        #endif
++        outStream[nowPos++] = previousByte;
++        len--;
++      }
++      while(len > 0 && nowPos < outSize);
++    }
++  }
++
++  #ifdef _LZMA_OUT_READ
++  vs->RangeDecoder = rd;
++  vs->DictionaryPos = dictionaryPos;
++  vs->GlobalPos = globalPos + nowPos;
++  vs->Reps[0] = rep0;
++  vs->Reps[1] = rep1;
++  vs->Reps[2] = rep2;
++  vs->Reps[3] = rep3;
++  vs->State = state;
++  vs->PreviousIsMatch = previousIsMatch;
++  vs->RemainLen = len;
++  #endif
++
++  *outSizeProcessed = nowPos;
++  return LZMA_RESULT_OK;
++}
+--- a/lib/Makefile
++++ b/lib/Makefile
+@@ -14,7 +14,7 @@ lib-$(CONFIG_SMP) += cpumask.o
+ lib-y	+= kobject.o kref.o klist.o
+ 
+ obj-y += div64.o sort.o parser.o halfmd4.o debug_locks.o random32.o \
+-	 bust_spinlocks.o hexdump.o kasprintf.o bitmap.o scatterlist.o
++	 bust_spinlocks.o hexdump.o kasprintf.o bitmap.o scatterlist.o LzmaDecode.o
+ 
+ ifeq ($(CONFIG_DEBUG_KOBJECT),y)
+ CFLAGS_kobject.o += -DDEBUG
diff --git a/target/linux/generic/patches-2.6.25/003-squashfs_lzma.patch b/target/linux/generic/patches-2.6.25/003-squashfs_lzma.patch
new file mode 100644
index 0000000000..9050e370ca
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/003-squashfs_lzma.patch
@@ -0,0 +1,107 @@
+--- a/fs/squashfs/inode.c
++++ b/fs/squashfs/inode.c
+@@ -4,6 +4,9 @@
+  * Copyright (c) 2002, 2003, 2004, 2005, 2006
+  * Phillip Lougher <phillip@lougher.org.uk>
+  *
++ * LZMA decompressor support added by Oleg I. Vdovikin
++ * Copyright (c) 2005 Oleg I.Vdovikin <oleg@cs.msu.su>
++ *
+  * This program is free software; you can redistribute it and/or
+  * modify it under the terms of the GNU General Public License
+  * as published by the Free Software Foundation; either version 2,
+@@ -21,6 +24,7 @@
+  * inode.c
+  */
+ 
++#define SQUASHFS_LZMA
+ #include <linux/types.h>
+ #include <linux/squashfs_fs.h>
+ #include <linux/module.h>
+@@ -44,6 +48,19 @@
+ 
+ #include "squashfs.h"
+ 
++#ifdef SQUASHFS_LZMA
++#include <linux/LzmaDecode.h>
++
++/* default LZMA settings, should be in sync with mksquashfs */
++#define LZMA_LC 3
++#define LZMA_LP 0
++#define LZMA_PB 2
++
++#define LZMA_WORKSPACE_SIZE ((LZMA_BASE_SIZE + \
++      (LZMA_LIT_SIZE << (LZMA_LC + LZMA_LP))) * sizeof(CProb))
++
++#endif
++
+ static void squashfs_put_super(struct super_block *);
+ static int squashfs_statfs(struct dentry *, struct kstatfs *);
+ static int squashfs_symlink_readpage(struct file *file, struct page *page);
+@@ -64,7 +81,11 @@ static int squashfs_get_sb(struct file_s
+ 			const char *, void *, struct vfsmount *);
+ 
+ 
++#ifdef SQUASHFS_LZMA
++static unsigned char lzma_workspace[LZMA_WORKSPACE_SIZE];
++#else
+ static z_stream stream;
++#endif
+ 
+ static struct file_system_type squashfs_fs_type = {
+ 	.owner = THIS_MODULE,
+@@ -249,6 +270,15 @@ SQSH_EXTERN unsigned int squashfs_read_d
+ 	if (compressed) {
+ 		int zlib_err;
+ 
++#ifdef SQUASHFS_LZMA
++		if ((zlib_err = LzmaDecode(lzma_workspace,
++			LZMA_WORKSPACE_SIZE, LZMA_LC, LZMA_LP, LZMA_PB,
++			c_buffer, c_byte, buffer, msblk->read_size, &bytes)) != LZMA_RESULT_OK)
++		{
++			ERROR("lzma returned unexpected result 0x%x\n", zlib_err);
++			bytes = 0;
++		}
++#else
+ 		stream.next_in = c_buffer;
+ 		stream.avail_in = c_byte;
+ 		stream.next_out = buffer;
+@@ -263,7 +293,7 @@ SQSH_EXTERN unsigned int squashfs_read_d
+ 			bytes = 0;
+ 		} else
+ 			bytes = stream.total_out;
+-
++#endif
+ 		up(&msblk->read_data_mutex);
+ 	}
+ 
+@@ -2045,15 +2075,19 @@ static int __init init_squashfs_fs(void)
+ 	printk(KERN_INFO "squashfs: version 3.0 (2006/03/15) "
+ 		"Phillip Lougher\n");
+ 
++#ifndef SQUASHFS_LZMA
+ 	if (!(stream.workspace = vmalloc(zlib_inflate_workspacesize()))) {
+ 		ERROR("Failed to allocate zlib workspace\n");
+ 		destroy_inodecache();
+ 		err = -ENOMEM;
+ 		goto out;
+ 	}
++#endif
+ 
+ 	if ((err = register_filesystem(&squashfs_fs_type))) {
++#ifndef SQUASHFS_LZMA
+ 		vfree(stream.workspace);
++#endif
+ 		destroy_inodecache();
+ 	}
+ 
+@@ -2064,7 +2098,9 @@ out:
+ 
+ static void __exit exit_squashfs_fs(void)
+ {
++#ifndef SQUASHFS_LZMA
+ 	vfree(stream.workspace);
++#endif
+ 	unregister_filesystem(&squashfs_fs_type);
+ 	destroy_inodecache();
+ }
diff --git a/target/linux/generic/patches-2.6.25/004-extra_optimization.patch b/target/linux/generic/patches-2.6.25/004-extra_optimization.patch
new file mode 100644
index 0000000000..ba1b71c610
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/004-extra_optimization.patch
@@ -0,0 +1,12 @@
+--- a/Makefile
++++ b/Makefile
+@@ -533,6 +533,9 @@ endif
+ NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
+ CHECKFLAGS     += $(NOSTDINC_FLAGS)
+ 
++# improve gcc optimization
++CFLAGS += $(call cc-option,-funit-at-a-time,)
++
+ # warn about C99 declaration after statement
+ KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
+ 
diff --git a/target/linux/generic/patches-2.6.25/005-squashfs_fix.patch b/target/linux/generic/patches-2.6.25/005-squashfs_fix.patch
new file mode 100644
index 0000000000..56b7fc2c40
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/005-squashfs_fix.patch
@@ -0,0 +1,19 @@
+--- a/fs/squashfs/inode.c
++++ b/fs/squashfs/inode.c
+@@ -33,6 +33,7 @@
+ #include <linux/fs.h>
+ #include <linux/smp_lock.h>
+ #include <linux/slab.h>
++#include <linux/exportfs.h>
+ #include <linux/squashfs_fs_sb.h>
+ #include <linux/squashfs_fs_i.h>
+ #include <linux/buffer_head.h>
+@@ -2125,7 +2126,7 @@ static void squashfs_destroy_inode(struc
+ }
+ 
+ 
+-static void init_once(void * foo, struct kmem_cache * cachep, unsigned long flags)
++static void init_once(struct kmem_cache * cachep, void *foo)
+ {
+ 	struct squashfs_inode_info *ei = foo;
+ 
diff --git a/target/linux/generic/patches-2.6.25/006-gcc4_inline_fix.patch b/target/linux/generic/patches-2.6.25/006-gcc4_inline_fix.patch
new file mode 100644
index 0000000000..cd62e9c250
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/006-gcc4_inline_fix.patch
@@ -0,0 +1,11 @@
+--- a/include/asm-mips/system.h
++++ b/include/asm-mips/system.h
+@@ -185,7 +185,7 @@ extern __u64 __xchg_u64_unsupported_on_3
+    if something tries to do an invalid xchg().  */
+ extern void __xchg_called_with_bad_pointer(void);
+ 
+-static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
++static __always_inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+ {
+ 	switch (size) {
+ 	case 4:
diff --git a/target/linux/generic/patches-2.6.25/007-samsung_flash.patch b/target/linux/generic/patches-2.6.25/007-samsung_flash.patch
new file mode 100644
index 0000000000..557736f7a4
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/007-samsung_flash.patch
@@ -0,0 +1,36 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -51,6 +51,7 @@
+ #define SST49LF040B	        0x0050
+ #define SST49LF008A		0x005a
+ #define AT49BV6416		0x00d6
++#define MANUFACTURER_SAMSUNG	0x00ec
+ 
+ static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+@@ -298,12 +299,19 @@ struct mtd_info *cfi_cmdset_0002(struct 
+ 
+ 		if (extp->MajorVersion != '1' ||
+ 		    (extp->MinorVersion < '0' || extp->MinorVersion > '4')) {
+-			printk(KERN_ERR "  Unknown Amd/Fujitsu Extended Query "
+-			       "version %c.%c.\n",  extp->MajorVersion,
+-			       extp->MinorVersion);
+-			kfree(extp);
+-			kfree(mtd);
+-			return NULL;
++		        if (cfi->mfr == MANUFACTURER_SAMSUNG &&
++			    (extp->MajorVersion == '3' && extp->MinorVersion == '3')) {
++			    printk(KERN_NOTICE "  Newer Samsung flash detected, "
++			           "should be compatibile with Amd/Fujitsu.\n");
++		        }
++		        else {
++			    printk(KERN_ERR "  Unknown Amd/Fujitsu Extended Query "
++			           "version %c.%c.\n",  extp->MajorVersion,
++			           extp->MinorVersion);
++			    kfree(extp);
++			    kfree(mtd);
++			    return NULL;
++		        }
+ 		}
+ 
+ 		/* Install our own private info structure */
diff --git a/target/linux/generic/patches-2.6.25/009-revert_intel_flash_breakage.patch b/target/linux/generic/patches-2.6.25/009-revert_intel_flash_breakage.patch
new file mode 100644
index 0000000000..072900786b
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/009-revert_intel_flash_breakage.patch
@@ -0,0 +1,169 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0001.c
++++ b/drivers/mtd/chips/cfi_cmdset_0001.c
+@@ -1008,7 +1008,7 @@ static void __xipram xip_enable(struct m
+ 
+ static int __xipram xip_wait_for_operation(
+ 		struct map_info *map, struct flchip *chip,
+-		unsigned long adr, unsigned int chip_op_time )
++		unsigned long adr, int *chip_op_time )
+ {
+ 	struct cfi_private *cfi = map->fldrv_priv;
+ 	struct cfi_pri_intelext *cfip = cfi->cmdset_priv;
+@@ -1017,7 +1017,7 @@ static int __xipram xip_wait_for_operati
+ 	flstate_t oldstate, newstate;
+ 
+        	start = xip_currtime();
+-	usec = chip_op_time * 8;
++	usec = *chip_op_time * 8;
+ 	if (usec == 0)
+ 		usec = 500000;
+ 	done = 0;
+@@ -1127,8 +1127,8 @@ static int __xipram xip_wait_for_operati
+ #define XIP_INVAL_CACHED_RANGE(map, from, size)  \
+ 	INVALIDATE_CACHED_RANGE(map, from, size)
+ 
+-#define INVAL_CACHE_AND_WAIT(map, chip, cmd_adr, inval_adr, inval_len, usec) \
+-	xip_wait_for_operation(map, chip, cmd_adr, usec)
++#define INVAL_CACHE_AND_WAIT(map, chip, cmd_adr, inval_adr, inval_len, p_usec) \
++	xip_wait_for_operation(map, chip, cmd_adr, p_usec)
+ 
+ #else
+ 
+@@ -1140,65 +1140,65 @@ static int __xipram xip_wait_for_operati
+ static int inval_cache_and_wait_for_operation(
+ 		struct map_info *map, struct flchip *chip,
+ 		unsigned long cmd_adr, unsigned long inval_adr, int inval_len,
+-		unsigned int chip_op_time)
++		int *chip_op_time )
+ {
+ 	struct cfi_private *cfi = map->fldrv_priv;
+ 	map_word status, status_OK = CMD(0x80);
+-	int chip_state = chip->state;
+-	unsigned int timeo, sleep_time;
++	int z, chip_state = chip->state;
++	unsigned long timeo;
+ 
+ 	spin_unlock(chip->mutex);
+ 	if (inval_len)
+ 		INVALIDATE_CACHED_RANGE(map, inval_adr, inval_len);
++	if (*chip_op_time)
++		cfi_udelay(*chip_op_time);
+ 	spin_lock(chip->mutex);
+ 
+-	/* set our timeout to 8 times the expected delay */
+-	timeo = chip_op_time * 8;
+-	if (!timeo)
+-		timeo = 500000;
+-	sleep_time = chip_op_time / 2;
++	timeo = *chip_op_time * 8 * HZ / 1000000;
++	if (timeo < HZ/2)
++		timeo = HZ/2;
++	timeo += jiffies;
+ 
++	z = 0;
+ 	for (;;) {
++		if (chip->state != chip_state) {
++			/* Someone's suspended the operation: sleep */
++			DECLARE_WAITQUEUE(wait, current);
++
++			set_current_state(TASK_UNINTERRUPTIBLE);
++			add_wait_queue(&chip->wq, &wait);
++			spin_unlock(chip->mutex);
++			schedule();
++			remove_wait_queue(&chip->wq, &wait);
++			timeo = jiffies + (HZ / 2); /* FIXME */
++			spin_lock(chip->mutex);
++			continue;
++		}
++
+ 		status = map_read(map, cmd_adr);
+ 		if (map_word_andequal(map, status, status_OK, status_OK))
+ 			break;
+ 
+-		if (!timeo) {
++		/* OK Still waiting */
++		if (time_after(jiffies, timeo)) {
+ 			map_write(map, CMD(0x70), cmd_adr);
+ 			chip->state = FL_STATUS;
+ 			return -ETIME;
+ 		}
+ 
+-		/* OK Still waiting. Drop the lock, wait a while and retry. */
++		/* Latency issues. Drop the lock, wait a while and retry */
++		z++;
+ 		spin_unlock(chip->mutex);
+-		if (sleep_time >= 1000000/HZ) {
+-			/*
+-			 * Half of the normal delay still remaining
+-			 * can be performed with a sleeping delay instead
+-			 * of busy waiting.
+-			 */
+-			msleep(sleep_time/1000);
+-			timeo -= sleep_time;
+-			sleep_time = 1000000/HZ;
+-		} else {
+-			udelay(1);
+-			cond_resched();
+-			timeo--;
+-		}
++		cfi_udelay(1);
+ 		spin_lock(chip->mutex);
+-
+-		while (chip->state != chip_state) {
+-			/* Someone's suspended the operation: sleep */
+-			DECLARE_WAITQUEUE(wait, current);
+-			set_current_state(TASK_UNINTERRUPTIBLE);
+-			add_wait_queue(&chip->wq, &wait);
+-			spin_unlock(chip->mutex);
+-			schedule();
+-			remove_wait_queue(&chip->wq, &wait);
+-			spin_lock(chip->mutex);
+-		}
+ 	}
+ 
++	if (!z) {
++		if (!--(*chip_op_time))
++			*chip_op_time = 1;
++	} else if (z > 1)
++		++(*chip_op_time);
++
+ 	/* Done and happy. */
+  	chip->state = FL_STATUS;
+ 	return 0;
+@@ -1207,7 +1207,8 @@ static int inval_cache_and_wait_for_oper
+ #endif
+ 
+ #define WAIT_TIMEOUT(map, chip, adr, udelay) \
+-	INVAL_CACHE_AND_WAIT(map, chip, adr, 0, 0, udelay);
++	({ int __udelay = (udelay); \
++	   INVAL_CACHE_AND_WAIT(map, chip, adr, 0, 0, &__udelay); })
+ 
+ 
+ static int do_point_onechip (struct map_info *map, struct flchip *chip, loff_t adr, size_t len)
+@@ -1438,7 +1439,7 @@ static int __xipram do_write_oneword(str
+ 
+ 	ret = INVAL_CACHE_AND_WAIT(map, chip, adr,
+ 				   adr, map_bankwidth(map),
+-				   chip->word_write_time);
++				   &chip->word_write_time);
+ 	if (ret) {
+ 		xip_enable(map, chip, adr);
+ 		printk(KERN_ERR "%s: word write error (status timeout)\n", map->name);
+@@ -1678,7 +1679,7 @@ static int __xipram do_write_buffer(stru
+ 
+ 	ret = INVAL_CACHE_AND_WAIT(map, chip, cmd_adr,
+ 				   initial_adr, initial_len,
+-				   chip->buffer_write_time);
++				   &chip->buffer_write_time);
+ 	if (ret) {
+ 		map_write(map, CMD(0x70), cmd_adr);
+ 		chip->state = FL_STATUS;
+@@ -1813,7 +1814,7 @@ static int __xipram do_erase_oneblock(st
+ 
+ 	ret = INVAL_CACHE_AND_WAIT(map, chip, adr,
+ 				   adr, len,
+-				   chip->erase_time);
++				   &chip->erase_time);
+ 	if (ret) {
+ 		map_write(map, CMD(0x70), adr);
+ 		chip->state = FL_STATUS;
diff --git a/target/linux/generic/patches-2.6.25/010-disable_old_squashfs_compatibility.patch b/target/linux/generic/patches-2.6.25/010-disable_old_squashfs_compatibility.patch
new file mode 100644
index 0000000000..01e27573bc
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/010-disable_old_squashfs_compatibility.patch
@@ -0,0 +1,19 @@
+--- a/fs/squashfs/Makefile
++++ b/fs/squashfs/Makefile
+@@ -4,4 +4,3 @@
+ 
+ obj-$(CONFIG_SQUASHFS) += squashfs.o
+ squashfs-y += inode.o
+-squashfs-y += squashfs2_0.o
+--- a/fs/squashfs/squashfs.h
++++ b/fs/squashfs/squashfs.h
+@@ -24,6 +24,9 @@
+ #ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY
+ #undef CONFIG_SQUASHFS_1_0_COMPATIBILITY
+ #endif
++#ifdef CONFIG_SQUASHFS_2_0_COMPATIBILITY
++#undef CONFIG_SQUASHFS_2_0_COMPATIBILITY
++#endif
+ 
+ #ifdef SQUASHFS_TRACE
+ #define TRACE(s, args...)	printk(KERN_NOTICE "SQUASHFS: "s, ## args)
diff --git a/target/linux/generic/patches-2.6.25/011-mips_boot.patch b/target/linux/generic/patches-2.6.25/011-mips_boot.patch
new file mode 100644
index 0000000000..4eba9095cf
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/011-mips_boot.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
+@@ -120,6 +120,8 @@
+ #endif
+ 	.endm
+ 
++	j kernel_entry
++	nop
+ #ifndef CONFIG_NO_EXCEPT_FILL
+ 	/*
+ 	 * Reserved space for exception handlers.
diff --git a/target/linux/generic/patches-2.6.25/023-mips-fix-kexec.patch b/target/linux/generic/patches-2.6.25/023-mips-fix-kexec.patch
new file mode 100644
index 0000000000..e51005f308
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/023-mips-fix-kexec.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/kernel/machine_kexec.c	2010-03-15 15:52:04.000000000 +0000
++++ b/arch/mips/kernel/machine_kexec.c	2010-03-29 12:10:37.000000000 +0100
+@@ -52,7 +52,7 @@
+ 	reboot_code_buffer =
+ 	  (unsigned long)page_address(image->control_code_page);
+ 
+-	kexec_start_address = image->start;
++	kexec_start_address = (unsigned long) phys_to_virt(image->start);
+ 	kexec_indirection_page =
+ 		(unsigned long) phys_to_virt(image->head & PAGE_MASK);
+ 
diff --git a/target/linux/generic/patches-2.6.25/024-mips_disable_fpu.patch b/target/linux/generic/patches-2.6.25/024-mips_disable_fpu.patch
new file mode 100644
index 0000000000..3dfbec7923
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/024-mips_disable_fpu.patch
@@ -0,0 +1,155 @@
+MIPS: allow disabling the kernel FPU emulator
+
+This patch allows turning off the in-kernel Algorithmics
+FPU emulator support, which allows one to save a couple of
+precious blocks on an embedded system.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+--
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -831,6 +831,17 @@ config I8259
+ config MIPS_BONITO64
+ 	bool
+ 
++config MIPS_FPU_EMU
++	bool "Enable FPU emulation"
++	default y
++	help
++	   This option allows building a kernel with or without the Algorithmics
++	   FPU emulator enabled. Turning off this option results in a kernel which
++	   does not catch floating operations exceptions. Make sure that your toolchain
++	   is configured to enable software floating point emulation in that case.
++		
++	   If unsure say Y here.
++
+ config MIPS_MSC
+ 	bool
+ 
+--- a/arch/mips/math-emu/Makefile
++++ b/arch/mips/math-emu/Makefile
+@@ -2,12 +2,14 @@
+ # Makefile for the Linux/MIPS kernel FPU emulation.
+ #
+ 
+-obj-y	:= cp1emu.o ieee754m.o ieee754d.o ieee754dp.o ieee754sp.o ieee754.o \
++obj-y	:=	kernel_linkage.o dsemul.o cp1emu.o
++
++obj-$(CONFIG_MIPS_FPU_EMU)	+= ieee754m.o ieee754d.o ieee754dp.o ieee754sp.o ieee754.o \
+ 	   ieee754xcpt.o dp_frexp.o dp_modf.o dp_div.o dp_mul.o dp_sub.o \
+ 	   dp_add.o dp_fsp.o dp_cmp.o dp_logb.o dp_scalb.o dp_simple.o \
+ 	   dp_tint.o dp_fint.o dp_tlong.o dp_flong.o sp_frexp.o sp_modf.o \
+ 	   sp_div.o sp_mul.o sp_sub.o sp_add.o sp_fdp.o sp_cmp.o sp_logb.o \
+ 	   sp_scalb.o sp_simple.o sp_tint.o sp_fint.o sp_tlong.o sp_flong.o \
+-	   dp_sqrt.o sp_sqrt.o kernel_linkage.o dsemul.o
++	   dp_sqrt.o sp_sqrt.o
+ 
+ EXTRA_CFLAGS += -Werror
+--- a/arch/mips/math-emu/cp1emu.c
++++ b/arch/mips/math-emu/cp1emu.c
+@@ -57,6 +57,12 @@
+ #endif
+ #define __mips 4
+ 
++/* Further private data for which no space exists in mips_fpu_struct */
++
++struct mips_fpu_emulator_stats fpuemustats;
++
++#ifdef CONFIG_MIPS_FPU_EMU
++
+ /* Function which emulates a floating point instruction. */
+ 
+ static int fpu_emu(struct pt_regs *, struct mips_fpu_struct *,
+@@ -67,10 +73,6 @@ static int fpux_emu(struct pt_regs *,
+ 	struct mips_fpu_struct *, mips_instruction);
+ #endif
+ 
+-/* Further private data for which no space exists in mips_fpu_struct */
+-
+-struct mips_fpu_emulator_stats fpuemustats;
+-
+ /* Control registers */
+ 
+ #define FPCREG_RID	0	/* $0  = revision id */
+@@ -1277,6 +1279,13 @@ int fpu_emulator_cop1Handler(struct pt_r
+ 
+ 	return sig;
+ }
++#else
++int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
++        int has_fpu)
++{
++	return 0;
++}
++#endif /* CONFIG_MIPS_FPU_EMU */
+ 
+ #ifdef CONFIG_DEBUG_FS
+ extern struct dentry *mips_debugfs_dir;
+--- a/arch/mips/math-emu/dsemul.c
++++ b/arch/mips/math-emu/dsemul.c
+@@ -110,6 +110,7 @@ int mips_dsemul(struct pt_regs *regs, mi
+ 	return SIGILL;		/* force out of emulation loop */
+ }
+ 
++#ifdef CONFIG_MIPS_FPU_EMU
+ int do_dsemulret(struct pt_regs *xcp)
+ {
+ 	struct emuframe __user *fr;
+@@ -166,3 +167,9 @@ int do_dsemulret(struct pt_regs *xcp)
+ 
+ 	return 1;
+ }
++#else
++int do_dsemulret(struct pt_regs *xcp)
++{
++	return 0;
++}
++#endif /* CONFIG_MIPS_FPU_EMU */
+--- a/arch/mips/math-emu/kernel_linkage.c
++++ b/arch/mips/math-emu/kernel_linkage.c
+@@ -28,6 +28,7 @@
+ 
+ #define SIGNALLING_NAN 0x7ff800007ff80000LL
+ 
++#ifdef CONFIG_MIPS_FPU_EMU
+ void fpu_emulator_init_fpu(void)
+ {
+ 	static int first = 1;
+@@ -111,4 +112,36 @@ int fpu_emulator_restore_context32(struc
+ 
+ 	return err;
+ }
+-#endif
++#endif	/* CONFIG_64BIT */
++#else
++
++void fpu_emulator_init_fpu(void)
++{
++	printk(KERN_INFO "FPU emulator disabled, make sure your toolchain"
++		"was compiled with software floating point support (soft-float)\n");
++	return;
++}
++
++int fpu_emulator_save_context(struct sigcontext __user *sc)
++{
++	return 0;
++}
++
++int fpu_emulator_restore_context(struct sigcontext __user *sc)
++{
++	return 0;
++}
++
++#ifdef CONFIG_64BIT
++int fpu_emulator_save_context32(struct sigcontext32 __user *sc)
++{
++	return 0;
++}
++
++int fpu_emulator_restore_context32(struct sigcontext32 __user *sc)
++{
++	return 0;
++}
++
++#endif	/* CONFIG_64BIT */
++#endif /* CONFIG_MIPS_FPU_EMU */
diff --git a/target/linux/generic/patches-2.6.25/060-block2mtd_init.patch b/target/linux/generic/patches-2.6.25/060-block2mtd_init.patch
new file mode 100644
index 0000000000..f5d9b0ca8a
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/060-block2mtd_init.patch
@@ -0,0 +1,112 @@
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -16,6 +16,7 @@
+ #include <linux/list.h>
+ #include <linux/init.h>
+ #include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
+ #include <linux/buffer_head.h>
+ #include <linux/mutex.h>
+ #include <linux/mount.h>
+@@ -237,10 +238,11 @@ static void block2mtd_free_device(struct
+ 
+ 
+ /* FIXME: ensure that mtd->size % erase_size == 0 */
+-static struct block2mtd_dev *add_device(char *devname, int erase_size)
++static struct block2mtd_dev *add_device(char *devname, int erase_size, char *mtdname)
+ {
+ 	struct block_device *bdev;
+ 	struct block2mtd_dev *dev;
++	struct mtd_partition *part;
+ 
+ 	if (!devname)
+ 		return NULL;
+@@ -279,14 +281,18 @@ static struct block2mtd_dev *add_device(
+ 
+ 	/* Setup the MTD structure */
+ 	/* make the name contain the block device in */
+-	dev->mtd.name = kmalloc(sizeof("block2mtd: ") + strlen(devname),
+-			GFP_KERNEL);
++
++	if (!mtdname)
++		mtdname = devname;
++
++	dev->mtd.name = kmalloc(strlen(mtdname) + 1, GFP_KERNEL);
++
+ 	if (!dev->mtd.name)
+ 		goto devinit_err;
++	
++	strcpy(dev->mtd.name, mtdname);
+ 
+-	sprintf(dev->mtd.name, "block2mtd: %s", devname);
+-
+-	dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK;
++	dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK & ~(erase_size - 1);
+ 	dev->mtd.erasesize = erase_size;
+ 	dev->mtd.writesize = 1;
+ 	dev->mtd.type = MTD_RAM;
+@@ -298,15 +304,18 @@ static struct block2mtd_dev *add_device(
+ 	dev->mtd.read = block2mtd_read;
+ 	dev->mtd.priv = dev;
+ 	dev->mtd.owner = THIS_MODULE;
+-
+-	if (add_mtd_device(&dev->mtd)) {
++	
++	part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
++	part->name = dev->mtd.name;
++	part->offset = 0;
++	part->size = dev->mtd.size;
++	if (add_mtd_partitions(&dev->mtd, part, 1)) {
+ 		/* Device didnt get added, so free the entry */
+ 		goto devinit_err;
+ 	}
+ 	list_add(&dev->list, &blkmtd_device_list);
+ 	INFO("mtd%d: [%s] erase_size = %dKiB [%d]", dev->mtd.index,
+-			dev->mtd.name + strlen("blkmtd: "),
+-			dev->mtd.erasesize >> 10, dev->mtd.erasesize);
++			mtdname, dev->mtd.erasesize >> 10, dev->mtd.erasesize);
+ 	return dev;
+ 
+ devinit_err:
+@@ -379,9 +388,9 @@ static char block2mtd_paramline[80 + 12]
+ 
+ static int block2mtd_setup2(const char *val)
+ {
+-	char buf[80 + 12]; /* 80 for device, 12 for erase size */
++	char buf[80 + 12 + 80]; /* 80 for device, 12 for erase size, 80 for name */
+ 	char *str = buf;
+-	char *token[2];
++	char *token[3];
+ 	char *name;
+ 	size_t erase_size = PAGE_SIZE;
+ 	int i, ret;
+@@ -392,7 +401,7 @@ static int block2mtd_setup2(const char *
+ 	strcpy(str, val);
+ 	kill_final_newline(str);
+ 
+-	for (i = 0; i < 2; i++)
++	for (i = 0; i < 3; i++)
+ 		token[i] = strsep(&str, ",");
+ 
+ 	if (str)
+@@ -411,8 +420,10 @@ static int block2mtd_setup2(const char *
+ 			parse_err("illegal erase size");
+ 		}
+ 	}
++	if (token[2] && (strlen(token[2]) + 1 > 80))
++		parse_err("mtd device name too long");
+ 
+-	add_device(name, erase_size);
++	add_device(name, erase_size, token[2]);
+ 
+ 	return 0;
+ }
+@@ -446,7 +457,7 @@ static int block2mtd_setup(const char *v
+ 
+ 
+ module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);
+-MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>]\"");
++MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>]]\"");
+ 
+ static int __init block2mtd_init(void)
+ {
diff --git a/target/linux/generic/patches-2.6.25/065-rootfs_split.patch b/target/linux/generic/patches-2.6.25/065-rootfs_split.patch
new file mode 100644
index 0000000000..5b882c6063
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/065-rootfs_split.patch
@@ -0,0 +1,951 @@
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -47,6 +47,16 @@ config MTD_PARTITIONS
+ 	  devices. Partitioning on NFTL 'devices' is a different - that's the
+ 	  'normal' form of partitioning used on a block device.
+ 
++config MTD_ROOTFS_ROOT_DEV
++	bool "Automatically set 'rootfs' partition to be root filesystem"
++	depends on MTD_PARTITIONS
++	default y
++
++config MTD_ROOTFS_SPLIT
++	bool "Automatically split 'rootfs' partition for squashfs"
++	depends on MTD_PARTITIONS
++	default y
++
+ config MTD_REDBOOT_PARTS
+ 	tristate "RedBoot partition table parsing"
+ 	depends on MTD_PARTITIONS
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -20,6 +20,8 @@
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+ #include <linux/mtd/compatmac.h>
++#include <linux/squashfs_fs.h>
++#include <linux/root_dev.h>
+ 
+ /* Our partition linked list */
+ static LIST_HEAD(mtd_partitions);
+@@ -39,7 +41,7 @@ struct mtd_part {
+  * the pointer to that structure with this macro.
+  */
+ #define PART(x)  ((struct mtd_part *)(x))
+-
++#define IS_PART(mtd) (mtd->read == part_read)
+ 
+ /*
+  * MTD methods which simply translate the effective address and pass through
+@@ -322,6 +324,316 @@ int del_mtd_partitions(struct mtd_info *
+ 	return 0;
+ }
+ 
++static u_int32_t cur_offset = 0;
++static int add_one_partition(struct mtd_info *master, const struct mtd_partition *part,
++		int i, struct mtd_part **slp)
++{
++	struct mtd_part *slave;
++
++	/* allocate the partition structure */
++	slave = kzalloc (sizeof(*slave), GFP_KERNEL);
++	if (!slave) {
++		printk ("memory allocation error while creating partitions for \"%s\"\n",
++			master->name);
++		del_mtd_partitions(master);
++		return -ENOMEM;
++	}
++	list_add(&slave->list, &mtd_partitions);
++
++	/* set up the MTD object for this partition */
++	slave->mtd.type = master->type;
++	slave->mtd.flags = master->flags & ~part->mask_flags;
++	slave->mtd.size = part->size;
++	slave->mtd.writesize = master->writesize;
++	slave->mtd.oobsize = master->oobsize;
++	slave->mtd.oobavail = master->oobavail;
++	slave->mtd.subpage_sft = master->subpage_sft;
++
++	slave->mtd.name = part->name;
++	slave->mtd.owner = master->owner;
++
++	slave->mtd.read = part_read;
++	slave->mtd.write = part_write;
++
++	if (master->panic_write)
++		slave->mtd.panic_write = part_panic_write;
++
++	slave->mtd.refresh_device = part->refresh_partition;
++
++	if(master->point && master->unpoint){
++		slave->mtd.point = part_point;
++		slave->mtd.unpoint = part_unpoint;
++	}
++
++	if (master->read_oob)
++		slave->mtd.read_oob = part_read_oob;
++	if (master->write_oob)
++		slave->mtd.write_oob = part_write_oob;
++	if(master->read_user_prot_reg)
++		slave->mtd.read_user_prot_reg = part_read_user_prot_reg;
++	if(master->read_fact_prot_reg)
++		slave->mtd.read_fact_prot_reg = part_read_fact_prot_reg;
++	if(master->write_user_prot_reg)
++		slave->mtd.write_user_prot_reg = part_write_user_prot_reg;
++	if(master->lock_user_prot_reg)
++		slave->mtd.lock_user_prot_reg = part_lock_user_prot_reg;
++	if(master->get_user_prot_info)
++		slave->mtd.get_user_prot_info = part_get_user_prot_info;
++	if(master->get_fact_prot_info)
++		slave->mtd.get_fact_prot_info = part_get_fact_prot_info;
++	if (master->sync)
++		slave->mtd.sync = part_sync;
++	if (!i && master->suspend && master->resume) {
++			slave->mtd.suspend = part_suspend;
++			slave->mtd.resume = part_resume;
++	}
++	if (master->writev)
++		slave->mtd.writev = part_writev;
++	if (master->lock)
++		slave->mtd.lock = part_lock;
++	if (master->unlock)
++		slave->mtd.unlock = part_unlock;
++	if (master->block_isbad)
++		slave->mtd.block_isbad = part_block_isbad;
++	if (master->block_markbad)
++		slave->mtd.block_markbad = part_block_markbad;
++	slave->mtd.erase = part_erase;
++	slave->master = master;
++	slave->offset = part->offset;
++	slave->index = i;
++
++	if (slave->offset == MTDPART_OFS_APPEND)
++		slave->offset = cur_offset;
++	if (slave->offset == MTDPART_OFS_NXTBLK) {
++		slave->offset = cur_offset;
++		if ((cur_offset % master->erasesize) != 0) {
++			/* Round up to next erasesize */
++			slave->offset = ((cur_offset / master->erasesize) + 1) * master->erasesize;
++			printk(KERN_NOTICE "Moving partition %d: "
++			       "0x%08x -> 0x%08x\n", i,
++			       cur_offset, slave->offset);
++		}
++	}
++	if (slave->mtd.size == MTDPART_SIZ_FULL)
++		slave->mtd.size = master->size - slave->offset;
++	cur_offset = slave->offset + slave->mtd.size;
++
++	printk (KERN_NOTICE "0x%08x-0x%08x : \"%s\"\n", slave->offset,
++		slave->offset + slave->mtd.size, slave->mtd.name);
++
++	/* let's do some sanity checks */
++	if (slave->offset >= master->size) {
++			/* let's register it anyway to preserve ordering */
++		slave->offset = 0;
++		slave->mtd.size = 0;
++		printk ("mtd: partition \"%s\" is out of reach -- disabled\n",
++			part->name);
++	}
++	if (slave->offset + slave->mtd.size > master->size) {
++		slave->mtd.size = master->size - slave->offset;
++		printk ("mtd: partition \"%s\" extends beyond the end of device \"%s\" -- size truncated to %#x\n",
++			part->name, master->name, slave->mtd.size);
++	}
++	if (master->numeraseregions>1) {
++		/* Deal with variable erase size stuff */
++		int i;
++		struct mtd_erase_region_info *regions = master->eraseregions;
++
++		/* Find the first erase regions which is part of this partition. */
++		for (i=0; i < master->numeraseregions && slave->offset >= regions[i].offset; i++)
++			;
++
++		for (i--; i < master->numeraseregions && slave->offset + slave->mtd.size > regions[i].offset; i++) {
++			if (slave->mtd.erasesize < regions[i].erasesize) {
++				slave->mtd.erasesize = regions[i].erasesize;
++			}
++		}
++	} else {
++		/* Single erase size */
++		slave->mtd.erasesize = master->erasesize;
++	}
++
++	if ((slave->mtd.flags & MTD_WRITEABLE) &&
++	    (slave->offset % slave->mtd.erasesize)) {
++		/* Doesn't start on a boundary of major erase size */
++		/* FIXME: Let it be writable if it is on a boundary of _minor_ erase size though */
++		slave->mtd.flags &= ~MTD_WRITEABLE;
++		printk ("mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
++			part->name);
++	}
++	if ((slave->mtd.flags & MTD_WRITEABLE) &&
++	    (slave->mtd.size % slave->mtd.erasesize)) {
++		slave->mtd.flags &= ~MTD_WRITEABLE;
++		printk ("mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
++			part->name);
++	}
++
++	slave->mtd.ecclayout = master->ecclayout;
++	if (master->block_isbad) {
++		uint32_t offs = 0;
++
++		while(offs < slave->mtd.size) {
++			if (master->block_isbad(master,
++						offs + slave->offset))
++				slave->mtd.ecc_stats.badblocks++;
++			offs += slave->mtd.erasesize;
++		}
++	}
++
++	if(part->mtdp)
++	{	/* store the object pointer (caller may or may not register it */
++		*part->mtdp = &slave->mtd;
++		slave->registered = 0;
++	}
++	else
++	{
++		/* register our partition */
++		add_mtd_device(&slave->mtd);
++		slave->registered = 1;
++	}
++
++	if (slp)
++		*slp = slave;
++
++	return 0;
++}
++
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++#define ROOTFS_SPLIT_NAME "rootfs_data"
++#define ROOTFS_REMOVED_NAME "<removed>"
++static int split_squashfs(struct mtd_info *master, int offset, int *split_offset)
++{
++	char buf[512];
++	struct squashfs_super_block *sb = (struct squashfs_super_block *) buf;
++	int len, ret;
++
++	ret = master->read(master, offset, sizeof(*sb), &len, buf);
++	if (ret || (len != sizeof(*sb))) {
++		printk(KERN_ALERT "split_squashfs: error occured while reading "
++			"from \"%s\"\n", master->name);
++		return -EINVAL;
++	}
++
++	if (*((u32 *) buf) != SQUASHFS_MAGIC) {
++		printk(KERN_ALERT "split_squashfs: no squashfs found in \"%s\"\n",
++			master->name);
++		*split_offset = 0;
++		return 0;
++	}
++
++	if (sb->bytes_used <= 0) {
++		printk(KERN_ALERT "split_squashfs: squashfs is empty in \"%s\"\n",
++			master->name);
++		*split_offset = 0;
++		return 0;
++	}
++
++	len = (u32) sb->bytes_used;
++	len += (offset & 0x000fffff);
++	len +=  (master->erasesize - 1);
++	len &= ~(master->erasesize - 1);
++	len -= (offset & 0x000fffff);
++	*split_offset = offset + len;
++
++	return 0;
++}
++
++static int split_rootfs_data(struct mtd_info *master, struct mtd_info *rpart, struct mtd_partition *part,
++		int index)
++{
++	struct mtd_partition *dpart;
++	struct mtd_part *slave = NULL;
++	int split_offset = 0;
++	int ret;
++
++	ret = split_squashfs(master, part->offset, &split_offset);
++	if (ret)
++		return ret;
++
++	if (split_offset <= 0)
++		return 0;
++
++	dpart = kmalloc(sizeof(*part)+sizeof(ROOTFS_SPLIT_NAME)+1, GFP_KERNEL);
++	if (dpart == NULL) {
++		printk(KERN_INFO "split_squashfs: no memory for partition \"%s\"\n",
++			ROOTFS_SPLIT_NAME);
++		return -ENOMEM;
++	}
++
++	memcpy(dpart, part, sizeof(*part));
++	dpart->name = (unsigned char *)&dpart[1];
++	strcpy(dpart->name, ROOTFS_SPLIT_NAME);
++
++	dpart->size -= split_offset - dpart->offset;
++	dpart->offset = split_offset;
++
++	if (dpart == NULL)
++		return 1;
++
++	printk(KERN_INFO "mtd: partition \"%s\" created automatically, ofs=%X, len=%X \n",
++		ROOTFS_SPLIT_NAME, dpart->offset, dpart->size);
++
++	ret = add_one_partition(master, dpart, index, &slave);
++	if (ret)
++		kfree(dpart);
++	else if (slave)
++		rpart->split = &slave->mtd;
++
++	return ret;
++}
++
++static int refresh_rootfs_split(struct mtd_info *mtd)
++{
++	struct mtd_partition tpart;
++	struct mtd_part *part;
++	int index = 0;
++	int offset, size;
++	int ret;
++
++	part = PART(mtd);
++
++	/* check for the new squashfs offset first */
++	ret = split_squashfs(part->master, part->offset, &offset);
++	if (ret)
++		return ret;
++
++	if ((offset > 0) && !mtd->split) {
++		printk(KERN_INFO "%s: creating new split partition for \"%s\"\n", __func__, mtd->name);
++		/* if we don't have a rootfs split partition, create a new one */
++		tpart.name = mtd->name;
++		tpart.size = mtd->size;
++		tpart.offset = part->offset;
++
++		/* find the index of the last partition */
++		if (!list_empty(&mtd_partitions))
++			index = list_first_entry(&mtd_partitions, struct mtd_part, list)->index + 1;
++
++		return split_rootfs_data(part->master, &part->mtd, &tpart, index);
++	} else if ((offset > 0) && mtd->split) {
++		/* update the offsets of the existing partition */
++		size = mtd->size + part->offset - offset;
++
++		part = PART(mtd->split);
++		part->offset = offset;
++		part->mtd.size = size;
++		printk(KERN_INFO "%s: %s partition \"" ROOTFS_SPLIT_NAME "\", offset: 0x%06x (0x%06x)\n",
++			__func__, (!strcmp(part->mtd.name, ROOTFS_SPLIT_NAME) ? "updating" : "creating"),
++			part->offset, part->mtd.size);
++		strcpy(part->mtd.name, ROOTFS_SPLIT_NAME);
++	} else if ((offset <= 0) && mtd->split) {
++		printk(KERN_INFO "%s: removing partition \"%s\"\n", __func__, mtd->split->name);
++
++		/* mark existing partition as removed */
++		part = PART(mtd->split);
++		strcpy(part->mtd.name, ROOTFS_REMOVED_NAME);
++		part->offset = 0;
++		part->mtd.size = 0;
++	}
++
++	return 0;
++}
++#endif /* CONFIG_MTD_ROOTFS_SPLIT */
++
+ /*
+  * This function, given a master MTD object and a partition table, creates
+  * and registers slave MTD objects which are bound to the master according to
+@@ -334,171 +646,31 @@ int add_mtd_partitions(struct mtd_info *
+ 		       int nbparts)
+ {
+ 	struct mtd_part *slave;
+-	u_int32_t cur_offset = 0;
+-	int i;
++	struct mtd_partition *part;
++	int i, j, ret = 0;
+ 
+ 	printk (KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
+ 
+-	for (i = 0; i < nbparts; i++) {
+-
+-		/* allocate the partition structure */
+-		slave = kzalloc (sizeof(*slave), GFP_KERNEL);
+-		if (!slave) {
+-			printk ("memory allocation error while creating partitions for \"%s\"\n",
+-				master->name);
+-			del_mtd_partitions(master);
+-			return -ENOMEM;
+-		}
+-		list_add(&slave->list, &mtd_partitions);
+-
+-		/* set up the MTD object for this partition */
+-		slave->mtd.type = master->type;
+-		slave->mtd.flags = master->flags & ~parts[i].mask_flags;
+-		slave->mtd.size = parts[i].size;
+-		slave->mtd.writesize = master->writesize;
+-		slave->mtd.oobsize = master->oobsize;
+-		slave->mtd.oobavail = master->oobavail;
+-		slave->mtd.subpage_sft = master->subpage_sft;
+-
+-		slave->mtd.name = parts[i].name;
+-		slave->mtd.owner = master->owner;
+-
+-		slave->mtd.read = part_read;
+-		slave->mtd.write = part_write;
+-
+-		if (master->panic_write)
+-			slave->mtd.panic_write = part_panic_write;
+-
+-		if(master->point && master->unpoint){
+-			slave->mtd.point = part_point;
+-			slave->mtd.unpoint = part_unpoint;
+-		}
+-
+-		if (master->read_oob)
+-			slave->mtd.read_oob = part_read_oob;
+-		if (master->write_oob)
+-			slave->mtd.write_oob = part_write_oob;
+-		if(master->read_user_prot_reg)
+-			slave->mtd.read_user_prot_reg = part_read_user_prot_reg;
+-		if(master->read_fact_prot_reg)
+-			slave->mtd.read_fact_prot_reg = part_read_fact_prot_reg;
+-		if(master->write_user_prot_reg)
+-			slave->mtd.write_user_prot_reg = part_write_user_prot_reg;
+-		if(master->lock_user_prot_reg)
+-			slave->mtd.lock_user_prot_reg = part_lock_user_prot_reg;
+-		if(master->get_user_prot_info)
+-			slave->mtd.get_user_prot_info = part_get_user_prot_info;
+-		if(master->get_fact_prot_info)
+-			slave->mtd.get_fact_prot_info = part_get_fact_prot_info;
+-		if (master->sync)
+-			slave->mtd.sync = part_sync;
+-		if (!i && master->suspend && master->resume) {
+-				slave->mtd.suspend = part_suspend;
+-				slave->mtd.resume = part_resume;
+-		}
+-		if (master->writev)
+-			slave->mtd.writev = part_writev;
+-		if (master->lock)
+-			slave->mtd.lock = part_lock;
+-		if (master->unlock)
+-			slave->mtd.unlock = part_unlock;
+-		if (master->block_isbad)
+-			slave->mtd.block_isbad = part_block_isbad;
+-		if (master->block_markbad)
+-			slave->mtd.block_markbad = part_block_markbad;
+-		slave->mtd.erase = part_erase;
+-		slave->master = master;
+-		slave->offset = parts[i].offset;
+-		slave->index = i;
+-
+-		if (slave->offset == MTDPART_OFS_APPEND)
+-			slave->offset = cur_offset;
+-		if (slave->offset == MTDPART_OFS_NXTBLK) {
+-			slave->offset = cur_offset;
+-			if ((cur_offset % master->erasesize) != 0) {
+-				/* Round up to next erasesize */
+-				slave->offset = ((cur_offset / master->erasesize) + 1) * master->erasesize;
+-				printk(KERN_NOTICE "Moving partition %d: "
+-				       "0x%08x -> 0x%08x\n", i,
+-				       cur_offset, slave->offset);
+-			}
+-		}
+-		if (slave->mtd.size == MTDPART_SIZ_FULL)
+-			slave->mtd.size = master->size - slave->offset;
+-		cur_offset = slave->offset + slave->mtd.size;
+-
+-		printk (KERN_NOTICE "0x%08x-0x%08x : \"%s\"\n", slave->offset,
+-			slave->offset + slave->mtd.size, slave->mtd.name);
+-
+-		/* let's do some sanity checks */
+-		if (slave->offset >= master->size) {
+-				/* let's register it anyway to preserve ordering */
+-			slave->offset = 0;
+-			slave->mtd.size = 0;
+-			printk ("mtd: partition \"%s\" is out of reach -- disabled\n",
+-				parts[i].name);
+-		}
+-		if (slave->offset + slave->mtd.size > master->size) {
+-			slave->mtd.size = master->size - slave->offset;
+-			printk ("mtd: partition \"%s\" extends beyond the end of device \"%s\" -- size truncated to %#x\n",
+-				parts[i].name, master->name, slave->mtd.size);
+-		}
+-		if (master->numeraseregions>1) {
+-			/* Deal with variable erase size stuff */
+-			int i;
+-			struct mtd_erase_region_info *regions = master->eraseregions;
+-
+-			/* Find the first erase regions which is part of this partition. */
+-			for (i=0; i < master->numeraseregions && slave->offset >= regions[i].offset; i++)
+-				;
+-
+-			for (i--; i < master->numeraseregions && slave->offset + slave->mtd.size > regions[i].offset; i++) {
+-				if (slave->mtd.erasesize < regions[i].erasesize) {
+-					slave->mtd.erasesize = regions[i].erasesize;
+-				}
++	for (i = 0, j = 0; i < nbparts; i++) {
++		part = (struct mtd_partition *) &parts[i];
++		ret = add_one_partition(master, part, j, &slave);
++		if (ret)
++			return ret;
++		j++;
++
++		if (strcmp(part->name, "rootfs") == 0 && slave->registered) {
++#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
++			if (ROOT_DEV == 0) {
++				printk(KERN_NOTICE "mtd: partition \"rootfs\" "
++					"set to be root filesystem\n");
++				ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, slave->mtd.index);
+ 			}
+-		} else {
+-			/* Single erase size */
+-			slave->mtd.erasesize = master->erasesize;
+-		}
+-
+-		if ((slave->mtd.flags & MTD_WRITEABLE) &&
+-		    (slave->offset % slave->mtd.erasesize)) {
+-			/* Doesn't start on a boundary of major erase size */
+-			/* FIXME: Let it be writable if it is on a boundary of _minor_ erase size though */
+-			slave->mtd.flags &= ~MTD_WRITEABLE;
+-			printk ("mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
+-				parts[i].name);
+-		}
+-		if ((slave->mtd.flags & MTD_WRITEABLE) &&
+-		    (slave->mtd.size % slave->mtd.erasesize)) {
+-			slave->mtd.flags &= ~MTD_WRITEABLE;
+-			printk ("mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
+-				parts[i].name);
+-		}
+-
+-		slave->mtd.ecclayout = master->ecclayout;
+-		if (master->block_isbad) {
+-			uint32_t offs = 0;
+-
+-			while(offs < slave->mtd.size) {
+-				if (master->block_isbad(master,
+-							offs + slave->offset))
+-					slave->mtd.ecc_stats.badblocks++;
+-				offs += slave->mtd.erasesize;
+-			}
+-		}
+-
+-		if(parts[i].mtdp)
+-		{	/* store the object pointer (caller may or may not register it */
+-			*parts[i].mtdp = &slave->mtd;
+-			slave->registered = 0;
+-		}
+-		else
+-		{
+-			/* register our partition */
+-			add_mtd_device(&slave->mtd);
+-			slave->registered = 1;
++#endif
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++			ret = split_rootfs_data(master, &slave->mtd, part, j);
++			if (ret == 0)
++				j++;
++#endif
+ 		}
+ 	}
+ 
+@@ -574,6 +746,32 @@ int parse_mtd_partitions(struct mtd_info
+ 	return ret;
+ }
+ 
++int refresh_mtd_partitions(struct mtd_info *mtd)
++{
++	int ret = 0;
++
++	if (IS_PART(mtd)) {
++		struct mtd_part *part;
++		struct mtd_info *master;
++
++		part = PART(mtd);
++		master = part->master;
++		if (master->refresh_device)
++			ret = master->refresh_device(master);
++	}
++
++	if (!ret && mtd->refresh_device)
++		ret = mtd->refresh_device(mtd);
++
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++	if (!ret && IS_PART(mtd) && !strcmp(mtd->name, "rootfs"))
++		refresh_rootfs_split(mtd);
++#endif
++
++	return 0;
++}
++
+ EXPORT_SYMBOL_GPL(parse_mtd_partitions);
++EXPORT_SYMBOL_GPL(refresh_mtd_partitions);
+ EXPORT_SYMBOL_GPL(register_mtd_parser);
+ EXPORT_SYMBOL_GPL(deregister_mtd_parser);
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -34,6 +34,8 @@ struct block2mtd_dev {
+ 	struct block_device *blkdev;
+ 	struct mtd_info mtd;
+ 	struct mutex write_mutex;
++	rwlock_t bdev_mutex;
++	char devname[0];
+ };
+ 
+ 
+@@ -86,6 +88,12 @@ static int block2mtd_erase(struct mtd_in
+ 	size_t len = instr->len;
+ 	int err;
+ 
++	read_lock(&dev->bdev_mutex);
++	if (!dev->blkdev) {
++		err = -EINVAL;
++		goto done;
++	}
++
+ 	instr->state = MTD_ERASING;
+ 	mutex_lock(&dev->write_mutex);
+ 	err = _block2mtd_erase(dev, from, len);
+@@ -98,6 +106,10 @@ static int block2mtd_erase(struct mtd_in
+ 
+ 	instr->state = MTD_ERASE_DONE;
+ 	mtd_erase_callback(instr);
++
++done:
++	read_unlock(&dev->bdev_mutex);
++
+ 	return err;
+ }
+ 
+@@ -109,10 +121,14 @@ static int block2mtd_read(struct mtd_inf
+ 	struct page *page;
+ 	int index = from >> PAGE_SHIFT;
+ 	int offset = from & (PAGE_SIZE-1);
+-	int cpylen;
++	int cpylen, err = 0;
++
++	read_lock(&dev->bdev_mutex);
++	if (!dev->blkdev || (from > mtd->size)) {
++		err = -EINVAL;
++		goto done;
++	}
+ 
+-	if (from > mtd->size)
+-		return -EINVAL;
+ 	if (from + len > mtd->size)
+ 		len = mtd->size - from;
+ 
+@@ -127,10 +143,14 @@ static int block2mtd_read(struct mtd_inf
+ 		len = len - cpylen;
+ 
+ 		page = page_read(dev->blkdev->bd_inode->i_mapping, index);
+-		if (!page)
+-			return -ENOMEM;
+-		if (IS_ERR(page))
+-			return PTR_ERR(page);
++		if (!page) {
++			err = -ENOMEM;
++			goto done;
++		}
++		if (IS_ERR(page)) {
++			err = PTR_ERR(page);
++			goto done;
++		}
+ 
+ 		memcpy(buf, page_address(page) + offset, cpylen);
+ 		page_cache_release(page);
+@@ -141,7 +161,10 @@ static int block2mtd_read(struct mtd_inf
+ 		offset = 0;
+ 		index++;
+ 	}
+-	return 0;
++
++done:
++	read_unlock(&dev->bdev_mutex);
++	return err;
+ }
+ 
+ 
+@@ -193,12 +216,22 @@ static int block2mtd_write(struct mtd_in
+ 		size_t *retlen, const u_char *buf)
+ {
+ 	struct block2mtd_dev *dev = mtd->priv;
+-	int err;
++	int err = 0;
++
++	read_lock(&dev->bdev_mutex);
++	if (!dev->blkdev) {
++		err = -EINVAL;
++		goto done;
++	}
+ 
+ 	if (!len)
+-		return 0;
+-	if (to >= mtd->size)
+-		return -ENOSPC;
++		goto done;
++
++	if (to >= mtd->size) {
++		err = -ENOSPC;
++		goto done;
++	}
++
+ 	if (to + len > mtd->size)
+ 		len = mtd->size - to;
+ 
+@@ -207,6 +240,9 @@ static int block2mtd_write(struct mtd_in
+ 	mutex_unlock(&dev->write_mutex);
+ 	if (err > 0)
+ 		err = 0;
++
++done:
++	read_unlock(&dev->bdev_mutex);
+ 	return err;
+ }
+ 
+@@ -215,51 +251,29 @@ static int block2mtd_write(struct mtd_in
+ static void block2mtd_sync(struct mtd_info *mtd)
+ {
+ 	struct block2mtd_dev *dev = mtd->priv;
+-	sync_blockdev(dev->blkdev);
+-	return;
+-}
+-
+-
+-static void block2mtd_free_device(struct block2mtd_dev *dev)
+-{
+-	if (!dev)
+-		return;
+-
+-	kfree(dev->mtd.name);
+ 
+-	if (dev->blkdev) {
+-		invalidate_mapping_pages(dev->blkdev->bd_inode->i_mapping,
+-					0, -1);
+-		close_bdev_excl(dev->blkdev);
+-	}
++	read_lock(&dev->bdev_mutex);
++	if (dev->blkdev)
++		sync_blockdev(dev->blkdev);
++	read_unlock(&dev->bdev_mutex);
+ 
+-	kfree(dev);
++	return;
+ }
+ 
+ 
+-/* FIXME: ensure that mtd->size % erase_size == 0 */
+-static struct block2mtd_dev *add_device(char *devname, int erase_size, char *mtdname)
++static int _open_bdev(struct block2mtd_dev *dev)
+ {
+ 	struct block_device *bdev;
+-	struct block2mtd_dev *dev;
+-	struct mtd_partition *part;
+-
+-	if (!devname)
+-		return NULL;
+-
+-	dev = kzalloc(sizeof(struct block2mtd_dev), GFP_KERNEL);
+-	if (!dev)
+-		return NULL;
+ 
+ 	/* Get a handle on the device */
+-	bdev = open_bdev_excl(devname, O_RDWR, NULL);
++	bdev = open_bdev_excl(dev->devname, O_RDWR, NULL);
+ #ifndef MODULE
+ 	if (IS_ERR(bdev)) {
+ 
+ 		/* We might not have rootfs mounted at this point. Try
+ 		   to resolve the device name by other means. */
+ 
+-		dev_t devt = name_to_dev_t(devname);
++		dev_t devt = name_to_dev_t(dev->devname);
+ 		if (devt) {
+ 			bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);
+ 		}
+@@ -267,17 +281,96 @@ static struct block2mtd_dev *add_device(
+ #endif
+ 
+ 	if (IS_ERR(bdev)) {
+-		ERROR("error: cannot open device %s", devname);
+-		goto devinit_err;
++		ERROR("error: cannot open device %s", dev->devname);
++		return 1;
+ 	}
+ 	dev->blkdev = bdev;
+ 
+ 	if (MAJOR(bdev->bd_dev) == MTD_BLOCK_MAJOR) {
+ 		ERROR("attempting to use an MTD device as a block device");
+-		goto devinit_err;
++		return 1;
+ 	}
+ 
++	return 0;
++}
++
++static void _close_bdev(struct block2mtd_dev *dev)
++{
++	struct block_device *bdev;
++
++	if (!dev->blkdev)
++		return;
++
++	bdev = dev->blkdev;
++	invalidate_mapping_pages(dev->blkdev->bd_inode->i_mapping, 0, -1);
++	close_bdev_excl(dev->blkdev);
++	dev->blkdev = NULL;
++}
++
++static void block2mtd_free_device(struct block2mtd_dev *dev)
++{
++	if (!dev)
++		return;
++
++	kfree(dev->mtd.name);
++	_close_bdev(dev);
++	kfree(dev);
++}
++
++
++static int block2mtd_refresh(struct mtd_info *mtd)
++{
++	struct block2mtd_dev *dev = mtd->priv;
++	struct block_device *bdev;
++	dev_t devt;
++	int err = 0;
++
++	/* no other mtd function can run at this point */
++	write_lock(&dev->bdev_mutex);
++
++	/* get the device number for the whole disk */
++	devt = MKDEV(MAJOR(dev->blkdev->bd_dev), 0);
++
++	/* close the old block device */
++	_close_bdev(dev);
++
++	/* open the whole disk, issue a partition rescan, then */
++	bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);
++	if (!bdev || !bdev->bd_disk)
++		err = -EINVAL;
++	else {
++		err = rescan_partitions(bdev->bd_disk, bdev);
++	}
++	if (bdev)
++		close_bdev_excl(bdev);
++
++	/* try to open the partition block device again */
++	_open_bdev(dev);
++	write_unlock(&dev->bdev_mutex);
++
++	return err;
++}
++
++/* FIXME: ensure that mtd->size % erase_size == 0 */
++static struct block2mtd_dev *add_device(char *devname, int erase_size, char *mtdname)
++{
++	struct block2mtd_dev *dev;
++	struct mtd_partition *part;
++
++	if (!devname)
++		return NULL;
++
++	dev = kzalloc(sizeof(struct block2mtd_dev) + strlen(devname) + 1, GFP_KERNEL);
++	if (!dev)
++		return NULL;
++
++	strcpy(dev->devname, devname);
++
++	if (_open_bdev(dev))
++		goto devinit_err;
++
+ 	mutex_init(&dev->write_mutex);
++	rwlock_init(&dev->bdev_mutex);
+ 
+ 	/* Setup the MTD structure */
+ 	/* make the name contain the block device in */
+@@ -304,6 +397,7 @@ static struct block2mtd_dev *add_device(
+ 	dev->mtd.read = block2mtd_read;
+ 	dev->mtd.priv = dev;
+ 	dev->mtd.owner = THIS_MODULE;
++	dev->mtd.refresh_device = block2mtd_refresh;
+ 	
+ 	part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
+ 	part->name = dev->mtd.name;
+--- a/drivers/mtd/mtdchar.c
++++ b/drivers/mtd/mtdchar.c
+@@ -17,6 +17,7 @@
+ 
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/compatmac.h>
++#include <linux/mtd/partitions.h>
+ 
+ #include <asm/uaccess.h>
+ 
+@@ -756,6 +757,13 @@ static int mtd_ioctl(struct inode *inode
+ 		file->f_pos = 0;
+ 		break;
+ 	}
++#ifdef CONFIG_MTD_PARTITIONS
++	case MTDREFRESH:
++	{
++		ret = refresh_mtd_partitions(mtd);
++		break;
++	}
++#endif
+ 
+ 	default:
+ 		ret = -ENOTTY;
+--- a/include/linux/mtd/mtd.h
++++ b/include/linux/mtd/mtd.h
+@@ -98,6 +98,7 @@ struct mtd_oob_ops {
+ 	uint8_t		*oobbuf;
+ };
+ 
++struct mtd_info;
+ struct mtd_info {
+ 	u_char type;
+ 	u_int32_t flags;
+@@ -211,6 +212,9 @@ struct mtd_info {
+ 	struct module *owner;
+ 	int usecount;
+ 
++	int (*refresh_device)(struct mtd_info *mtd);
++	struct mtd_info *split;
++
+ 	/* If the driver is something smart, like UBI, it may need to maintain
+ 	 * its own reference counting. The below functions are only for driver.
+ 	 * The driver may register its callbacks. These callbacks are not
+--- a/include/linux/mtd/partitions.h
++++ b/include/linux/mtd/partitions.h
+@@ -36,6 +36,7 @@
+  * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK).
+  */
+ 
++struct mtd_partition;
+ struct mtd_partition {
+ 	char *name;			/* identifier string */
+ 	u_int32_t size;			/* partition size */
+@@ -43,6 +44,7 @@ struct mtd_partition {
+ 	u_int32_t mask_flags;		/* master MTD flags to mask out for this partition */
+ 	struct nand_ecclayout *ecclayout;	/* out of band layout for this partition (NAND only)*/
+ 	struct mtd_info **mtdp;		/* pointer to store the MTD object */
++	int (*refresh_partition)(struct mtd_info *);
+ };
+ 
+ #define MTDPART_OFS_NXTBLK	(-2)
+@@ -52,6 +54,7 @@ struct mtd_partition {
+ 
+ int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
+ int del_mtd_partitions(struct mtd_info *);
++int refresh_mtd_partitions(struct mtd_info *);
+ 
+ /*
+  * Functions dealing with the various ways of partitioning the space
+--- a/include/mtd/mtd-abi.h
++++ b/include/mtd/mtd-abi.h
+@@ -95,6 +95,7 @@ struct otp_info {
+ #define ECCGETLAYOUT		_IOR('M', 17, struct nand_ecclayout)
+ #define ECCGETSTATS		_IOR('M', 18, struct mtd_ecc_stats)
+ #define MTDFILEMODE		_IO('M', 19)
++#define MTDREFRESH		_IO('M', 23)
+ 
+ /*
+  * Obsolete legacy interface. Keep it in order not to break userspace
diff --git a/target/linux/generic/patches-2.6.25/070-redboot_space.patch b/target/linux/generic/patches-2.6.25/070-redboot_space.patch
new file mode 100644
index 0000000000..784fba1b70
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/070-redboot_space.patch
@@ -0,0 +1,30 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -251,14 +251,21 @@ static int parse_redboot_partitions(stru
+ #endif
+ 		names += strlen(names)+1;
+ 
+-#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+ 		if(fl->next && fl->img->flash_base + fl->img->size + master->erasesize <= fl->next->img->flash_base) {
+-			i++;
+-			parts[i].offset = parts[i-1].size + parts[i-1].offset;
+-			parts[i].size = fl->next->img->flash_base - parts[i].offset;
+-			parts[i].name = nullname;
+-		}
++			if (!strcmp(parts[i].name, "rootfs")) {
++				parts[i].size = fl->next->img->flash_base;
++				parts[i].size &= ~(master->erasesize - 1);
++				parts[i].size -= parts[i].offset;
++#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
++				nrparts--;
++			} else {
++				i++;
++				parts[i].offset = parts[i-1].size + parts[i-1].offset;
++				parts[i].size = fl->next->img->flash_base - parts[i].offset;
++				parts[i].name = nullname;
+ #endif
++			}
++		}
+ 		tmp_fl = fl;
+ 		fl = fl->next;
+ 		kfree(tmp_fl);
diff --git a/target/linux/generic/patches-2.6.25/080-mtd_plat_nand_chip_fixup.patch b/target/linux/generic/patches-2.6.25/080-mtd_plat_nand_chip_fixup.patch
new file mode 100644
index 0000000000..61f2806bda
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/080-mtd_plat_nand_chip_fixup.patch
@@ -0,0 +1,32 @@
+--- a/include/linux/mtd/nand.h
++++ b/include/linux/mtd/nand.h
+@@ -573,6 +573,7 @@ struct platform_nand_chip {
+ 	int			chip_delay;
+ 	unsigned int		options;
+ 	const char		**part_probe_types;
++	int			(*chip_fixup)(struct mtd_info *mtd);
+ 	void			*priv;
+ };
+ 
+--- a/drivers/mtd/nand/plat_nand.c
++++ b/drivers/mtd/nand/plat_nand.c
+@@ -70,7 +70,18 @@ static int __init plat_nand_probe(struct
+ 	platform_set_drvdata(pdev, data);
+ 
+ 	/* Scan to find existance of the device */
+-	if (nand_scan(&data->mtd, 1)) {
++	if (nand_scan_ident(&data->mtd, 1)) {
++		res = -ENXIO;
++		goto out;
++	}
++
++	if (pdata->chip.chip_fixup) {
++		res = pdata->chip.chip_fixup(&data->mtd);
++		if (res)
++			goto out;
++	}
++
++	if (nand_scan_tail(&data->mtd)) {
+ 		res = -ENXIO;
+ 		goto out;
+ 	}
diff --git a/target/linux/generic/patches-2.6.25/100-netfilter_layer7_2.21.patch b/target/linux/generic/patches-2.6.25/100-netfilter_layer7_2.21.patch
new file mode 100644
index 0000000000..307f088604
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/100-netfilter_layer7_2.21.patch
@@ -0,0 +1,2132 @@
+--- /dev/null
++++ b/include/linux/netfilter/xt_layer7.h
+@@ -0,0 +1,13 @@
++#ifndef _XT_LAYER7_H
++#define _XT_LAYER7_H
++
++#define MAX_PATTERN_LEN 8192
++#define MAX_PROTOCOL_LEN 256
++
++struct xt_layer7_info {
++    char protocol[MAX_PROTOCOL_LEN];
++    char pattern[MAX_PATTERN_LEN];
++    u_int8_t invert;
++};
++
++#endif /* _XT_LAYER7_H */
+--- a/include/net/netfilter/nf_conntrack.h
++++ b/include/net/netfilter/nf_conntrack.h
+@@ -124,6 +124,22 @@ struct nf_conn
+ 	u_int32_t secmark;
+ #endif
+ 
++#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || \
++    defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++	struct {
++		/*
++		 * e.g. "http". NULL before decision. "unknown" after decision
++		 * if no match.
++		 */
++		char *app_proto;
++		/*
++		 * application layer data so far. NULL after match decision.
++		 */
++		char *app_data;
++		unsigned int app_data_len;
++	} layer7;
++#endif
++
+ 	/* Storage reserved for other modules: */
+ 	union nf_conntrack_proto proto;
+ 
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -735,6 +735,27 @@ config NETFILTER_XT_MATCH_STATE
+ 
+ 	  To compile it as a module, choose M here.  If unsure, say N.
+ 
++config NETFILTER_XT_MATCH_LAYER7
++	tristate '"layer7" match support'
++	depends on NETFILTER_XTABLES
++	depends on EXPERIMENTAL && (IP_NF_CONNTRACK || NF_CONNTRACK)
++       depends on NF_CT_ACCT
++	help
++	  Say Y if you want to be able to classify connections (and their
++	  packets) based on regular expression matching of their application
++	  layer data.   This is one way to classify applications such as
++	  peer-to-peer filesharing systems that do not always use the same
++	  port.
++
++	  To compile it as a module, choose M here.  If unsure, say N.
++
++config NETFILTER_XT_MATCH_LAYER7_DEBUG
++        bool 'Layer 7 debugging output'
++        depends on NETFILTER_XT_MATCH_LAYER7
++        help
++          Say Y to get lots of debugging output.
++
++
+ config NETFILTER_XT_MATCH_STATISTIC
+ 	tristate '"statistic" match support'
+ 	depends on NETFILTER_XTABLES
+--- a/net/netfilter/Makefile
++++ b/net/netfilter/Makefile
+@@ -77,6 +77,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_RATEEST)
+ obj-$(CONFIG_NETFILTER_XT_MATCH_REALM) += xt_realm.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_SCTP) += xt_sctp.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STATE) += xt_state.o
++obj-$(CONFIG_NETFILTER_XT_MATCH_LAYER7) += xt_layer7.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STATISTIC) += xt_statistic.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STRING) += xt_string.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_TCPMSS) += xt_tcpmss.o
+--- a/net/netfilter/nf_conntrack_core.c
++++ b/net/netfilter/nf_conntrack_core.c
+@@ -208,6 +208,14 @@ destroy_conntrack(struct nf_conntrack *n
+ 	 * too. */
+ 	nf_ct_remove_expectations(ct);
+ 
++	#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++	if(ct->layer7.app_proto)
++		kfree(ct->layer7.app_proto);
++	if(ct->layer7.app_data)
++	kfree(ct->layer7.app_data);
++	#endif
++
++
+ 	/* We overload first tuple to link into unconfirmed list. */
+ 	if (!nf_ct_is_confirmed(ct)) {
+ 		BUG_ON(hlist_unhashed(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnode));
+--- a/net/netfilter/nf_conntrack_standalone.c
++++ b/net/netfilter/nf_conntrack_standalone.c
+@@ -181,6 +181,12 @@ static int ct_seq_show(struct seq_file *
+ 		return -ENOSPC;
+ #endif
+ 
++#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++	if(ct->layer7.app_proto &&
++           seq_printf(s, "l7proto=%s ", ct->layer7.app_proto))
++		return -ENOSPC;
++#endif
++
+ 	if (seq_printf(s, "use=%u\n", atomic_read(&ct->ct_general.use)))
+ 		return -ENOSPC;
+ 
+--- /dev/null
++++ b/net/netfilter/regexp/regexp.c
+@@ -0,0 +1,1197 @@
++/*
++ * regcomp and regexec -- regsub and regerror are elsewhere
++ * @(#)regexp.c	1.3 of 18 April 87
++ *
++ *	Copyright (c) 1986 by University of Toronto.
++ *	Written by Henry Spencer.  Not derived from licensed software.
++ *
++ *	Permission is granted to anyone to use this software for any
++ *	purpose on any computer system, and to redistribute it freely,
++ *	subject to the following restrictions:
++ *
++ *	1. The author is not responsible for the consequences of use of
++ *		this software, no matter how awful, even if they arise
++ *		from defects in it.
++ *
++ *	2. The origin of this software must not be misrepresented, either
++ *		by explicit claim or by omission.
++ *
++ *	3. Altered versions must be plainly marked as such, and must not
++ *		be misrepresented as being the original software.
++ *
++ * Beware that some of this code is subtly aware of the way operator
++ * precedence is structured in regular expressions.  Serious changes in
++ * regular-expression syntax might require a total rethink.
++ *
++ * This code was modified by Ethan Sommer to work within the kernel
++ * (it now uses kmalloc etc..)
++ *
++ * Modified slightly by Matthew Strait to use more modern C.
++ */
++
++#include "regexp.h"
++#include "regmagic.h"
++
++/* added by ethan and matt.  Lets it work in both kernel and user space.
++(So iptables can use it, for instance.)  Yea, it goes both ways... */
++#if __KERNEL__
++  #define malloc(foo) kmalloc(foo,GFP_ATOMIC)
++#else
++  #define printk(format,args...) printf(format,##args)
++#endif
++
++void regerror(char * s)
++{
++        printk("<3>Regexp: %s\n", s);
++        /* NOTREACHED */
++}
++
++/*
++ * The "internal use only" fields in regexp.h are present to pass info from
++ * compile to execute that permits the execute phase to run lots faster on
++ * simple cases.  They are:
++ *
++ * regstart	char that must begin a match; '\0' if none obvious
++ * reganch	is the match anchored (at beginning-of-line only)?
++ * regmust	string (pointer into program) that match must include, or NULL
++ * regmlen	length of regmust string
++ *
++ * Regstart and reganch permit very fast decisions on suitable starting points
++ * for a match, cutting down the work a lot.  Regmust permits fast rejection
++ * of lines that cannot possibly match.  The regmust tests are costly enough
++ * that regcomp() supplies a regmust only if the r.e. contains something
++ * potentially expensive (at present, the only such thing detected is * or +
++ * at the start of the r.e., which can involve a lot of backup).  Regmlen is
++ * supplied because the test in regexec() needs it and regcomp() is computing
++ * it anyway.
++ */
++
++/*
++ * Structure for regexp "program".  This is essentially a linear encoding
++ * of a nondeterministic finite-state machine (aka syntax charts or
++ * "railroad normal form" in parsing technology).  Each node is an opcode
++ * plus a "next" pointer, possibly plus an operand.  "Next" pointers of
++ * all nodes except BRANCH implement concatenation; a "next" pointer with
++ * a BRANCH on both ends of it is connecting two alternatives.  (Here we
++ * have one of the subtle syntax dependencies:  an individual BRANCH (as
++ * opposed to a collection of them) is never concatenated with anything
++ * because of operator precedence.)  The operand of some types of node is
++ * a literal string; for others, it is a node leading into a sub-FSM.  In
++ * particular, the operand of a BRANCH node is the first node of the branch.
++ * (NB this is *not* a tree structure:  the tail of the branch connects
++ * to the thing following the set of BRANCHes.)  The opcodes are:
++ */
++
++/* definition	number	opnd?	meaning */
++#define	END	0	/* no	End of program. */
++#define	BOL	1	/* no	Match "" at beginning of line. */
++#define	EOL	2	/* no	Match "" at end of line. */
++#define	ANY	3	/* no	Match any one character. */
++#define	ANYOF	4	/* str	Match any character in this string. */
++#define	ANYBUT	5	/* str	Match any character not in this string. */
++#define	BRANCH	6	/* node	Match this alternative, or the next... */
++#define	BACK	7	/* no	Match "", "next" ptr points backward. */
++#define	EXACTLY	8	/* str	Match this string. */
++#define	NOTHING	9	/* no	Match empty string. */
++#define	STAR	10	/* node	Match this (simple) thing 0 or more times. */
++#define	PLUS	11	/* node	Match this (simple) thing 1 or more times. */
++#define	OPEN	20	/* no	Mark this point in input as start of #n. */
++			/*	OPEN+1 is number 1, etc. */
++#define	CLOSE	30	/* no	Analogous to OPEN. */
++
++/*
++ * Opcode notes:
++ *
++ * BRANCH	The set of branches constituting a single choice are hooked
++ *		together with their "next" pointers, since precedence prevents
++ *		anything being concatenated to any individual branch.  The
++ *		"next" pointer of the last BRANCH in a choice points to the
++ *		thing following the whole choice.  This is also where the
++ *		final "next" pointer of each individual branch points; each
++ *		branch starts with the operand node of a BRANCH node.
++ *
++ * BACK		Normal "next" pointers all implicitly point forward; BACK
++ *		exists to make loop structures possible.
++ *
++ * STAR,PLUS	'?', and complex '*' and '+', are implemented as circular
++ *		BRANCH structures using BACK.  Simple cases (one character
++ *		per match) are implemented with STAR and PLUS for speed
++ *		and to minimize recursive plunges.
++ *
++ * OPEN,CLOSE	...are numbered at compile time.
++ */
++
++/*
++ * A node is one char of opcode followed by two chars of "next" pointer.
++ * "Next" pointers are stored as two 8-bit pieces, high order first.  The
++ * value is a positive offset from the opcode of the node containing it.
++ * An operand, if any, simply follows the node.  (Note that much of the
++ * code generation knows about this implicit relationship.)
++ *
++ * Using two bytes for the "next" pointer is vast overkill for most things,
++ * but allows patterns to get big without disasters.
++ */
++#define	OP(p)	(*(p))
++#define	NEXT(p)	(((*((p)+1)&0377)<<8) + (*((p)+2)&0377))
++#define	OPERAND(p)	((p) + 3)
++
++/*
++ * See regmagic.h for one further detail of program structure.
++ */
++
++
++/*
++ * Utility definitions.
++ */
++#ifndef CHARBITS
++#define	UCHARAT(p)	((int)*(unsigned char *)(p))
++#else
++#define	UCHARAT(p)	((int)*(p)&CHARBITS)
++#endif
++
++#define	FAIL(m)	{ regerror(m); return(NULL); }
++#define	ISMULT(c)	((c) == '*' || (c) == '+' || (c) == '?')
++#define	META	"^$.[()|?+*\\"
++
++/*
++ * Flags to be passed up and down.
++ */
++#define	HASWIDTH	01	/* Known never to match null string. */
++#define	SIMPLE		02	/* Simple enough to be STAR/PLUS operand. */
++#define	SPSTART		04	/* Starts with * or +. */
++#define	WORST		0	/* Worst case. */
++
++/*
++ * Global work variables for regcomp().
++ */
++struct match_globals {
++char *reginput;		/* String-input pointer. */
++char *regbol;		/* Beginning of input, for ^ check. */
++char **regstartp;	/* Pointer to startp array. */
++char **regendp;		/* Ditto for endp. */
++char *regparse;		/* Input-scan pointer. */
++int regnpar;		/* () count. */
++char regdummy;
++char *regcode;		/* Code-emit pointer; &regdummy = don't. */
++long regsize;		/* Code size. */
++};
++
++/*
++ * Forward declarations for regcomp()'s friends.
++ */
++#ifndef STATIC
++#define	STATIC	static
++#endif
++STATIC char *reg(struct match_globals *g, int paren,int *flagp);
++STATIC char *regbranch(struct match_globals *g, int *flagp);
++STATIC char *regpiece(struct match_globals *g, int *flagp);
++STATIC char *regatom(struct match_globals *g, int *flagp);
++STATIC char *regnode(struct match_globals *g, char op);
++STATIC char *regnext(struct match_globals *g, char *p);
++STATIC void regc(struct match_globals *g, char b);
++STATIC void reginsert(struct match_globals *g, char op, char *opnd);
++STATIC void regtail(struct match_globals *g, char *p, char *val);
++STATIC void regoptail(struct match_globals *g, char *p, char *val);
++
++
++__kernel_size_t my_strcspn(const char *s1,const char *s2)
++{
++        char *scan1;
++        char *scan2;
++        int count;
++
++        count = 0;
++        for (scan1 = (char *)s1; *scan1 != '\0'; scan1++) {
++                for (scan2 = (char *)s2; *scan2 != '\0';)       /* ++ moved down. */
++                        if (*scan1 == *scan2++)
++                                return(count);
++                count++;
++        }
++        return(count);
++}
++
++/*
++ - regcomp - compile a regular expression into internal code
++ *
++ * We can't allocate space until we know how big the compiled form will be,
++ * but we can't compile it (and thus know how big it is) until we've got a
++ * place to put the code.  So we cheat:  we compile it twice, once with code
++ * generation turned off and size counting turned on, and once "for real".
++ * This also means that we don't allocate space until we are sure that the
++ * thing really will compile successfully, and we never have to move the
++ * code and thus invalidate pointers into it.  (Note that it has to be in
++ * one piece because free() must be able to free it all.)
++ *
++ * Beware that the optimization-preparation code in here knows about some
++ * of the structure of the compiled regexp.
++ */
++regexp *
++regcomp(char *exp,int *patternsize)
++{
++	register regexp *r;
++	register char *scan;
++	register char *longest;
++	register int len;
++	int flags;
++	struct match_globals g;
++	
++	/* commented out by ethan
++	   extern char *malloc();
++	*/
++
++	if (exp == NULL)
++		FAIL("NULL argument");
++
++	/* First pass: determine size, legality. */
++	g.regparse = exp;
++	g.regnpar = 1;
++	g.regsize = 0L;
++	g.regcode = &g.regdummy;
++	regc(&g, MAGIC);
++	if (reg(&g, 0, &flags) == NULL)
++		return(NULL);
++
++	/* Small enough for pointer-storage convention? */
++	if (g.regsize >= 32767L)		/* Probably could be 65535L. */
++		FAIL("regexp too big");
++
++	/* Allocate space. */
++	*patternsize=sizeof(regexp) + (unsigned)g.regsize;
++	r = (regexp *)malloc(sizeof(regexp) + (unsigned)g.regsize);
++	if (r == NULL)
++		FAIL("out of space");
++
++	/* Second pass: emit code. */
++	g.regparse = exp;
++	g.regnpar = 1;
++	g.regcode = r->program;
++	regc(&g, MAGIC);
++	if (reg(&g, 0, &flags) == NULL)
++		return(NULL);
++
++	/* Dig out information for optimizations. */
++	r->regstart = '\0';	/* Worst-case defaults. */
++	r->reganch = 0;
++	r->regmust = NULL;
++	r->regmlen = 0;
++	scan = r->program+1;			/* First BRANCH. */
++	if (OP(regnext(&g, scan)) == END) {		/* Only one top-level choice. */
++		scan = OPERAND(scan);
++
++		/* Starting-point info. */
++		if (OP(scan) == EXACTLY)
++			r->regstart = *OPERAND(scan);
++		else if (OP(scan) == BOL)
++			r->reganch++;
++
++		/*
++		 * If there's something expensive in the r.e., find the
++		 * longest literal string that must appear and make it the
++		 * regmust.  Resolve ties in favor of later strings, since
++		 * the regstart check works with the beginning of the r.e.
++		 * and avoiding duplication strengthens checking.  Not a
++		 * strong reason, but sufficient in the absence of others.
++		 */
++		if (flags&SPSTART) {
++			longest = NULL;
++			len = 0;
++			for (; scan != NULL; scan = regnext(&g, scan))
++				if (OP(scan) == EXACTLY && strlen(OPERAND(scan)) >= len) {
++					longest = OPERAND(scan);
++					len = strlen(OPERAND(scan));
++				}
++			r->regmust = longest;
++			r->regmlen = len;
++		}
++	}
++
++	return(r);
++}
++
++/*
++ - reg - regular expression, i.e. main body or parenthesized thing
++ *
++ * Caller must absorb opening parenthesis.
++ *
++ * Combining parenthesis handling with the base level of regular expression
++ * is a trifle forced, but the need to tie the tails of the branches to what
++ * follows makes it hard to avoid.
++ */
++static char *
++reg(struct match_globals *g, int paren, int *flagp /* Parenthesized? */ )
++{
++	register char *ret;
++	register char *br;
++	register char *ender;
++	register int parno = 0; /* 0 makes gcc happy */
++	int flags;
++
++	*flagp = HASWIDTH;	/* Tentatively. */
++
++	/* Make an OPEN node, if parenthesized. */
++	if (paren) {
++		if (g->regnpar >= NSUBEXP)
++			FAIL("too many ()");
++		parno = g->regnpar;
++		g->regnpar++;
++		ret = regnode(g, OPEN+parno);
++	} else
++		ret = NULL;
++
++	/* Pick up the branches, linking them together. */
++	br = regbranch(g, &flags);
++	if (br == NULL)
++		return(NULL);
++	if (ret != NULL)
++		regtail(g, ret, br);	/* OPEN -> first. */
++	else
++		ret = br;
++	if (!(flags&HASWIDTH))
++		*flagp &= ~HASWIDTH;
++	*flagp |= flags&SPSTART;
++	while (*g->regparse == '|') {
++		g->regparse++;
++		br = regbranch(g, &flags);
++		if (br == NULL)
++			return(NULL);
++		regtail(g, ret, br);	/* BRANCH -> BRANCH. */
++		if (!(flags&HASWIDTH))
++			*flagp &= ~HASWIDTH;
++		*flagp |= flags&SPSTART;
++	}
++
++	/* Make a closing node, and hook it on the end. */
++	ender = regnode(g, (paren) ? CLOSE+parno : END);	
++	regtail(g, ret, ender);
++
++	/* Hook the tails of the branches to the closing node. */
++	for (br = ret; br != NULL; br = regnext(g, br))
++		regoptail(g, br, ender);
++
++	/* Check for proper termination. */
++	if (paren && *g->regparse++ != ')') {
++		FAIL("unmatched ()");
++	} else if (!paren && *g->regparse != '\0') {
++		if (*g->regparse == ')') {
++			FAIL("unmatched ()");
++		} else
++			FAIL("junk on end");	/* "Can't happen". */
++		/* NOTREACHED */
++	}
++
++	return(ret);
++}
++
++/*
++ - regbranch - one alternative of an | operator
++ *
++ * Implements the concatenation operator.
++ */
++static char *
++regbranch(struct match_globals *g, int *flagp)
++{
++	register char *ret;
++	register char *chain;
++	register char *latest;
++	int flags;
++
++	*flagp = WORST;		/* Tentatively. */
++
++	ret = regnode(g, BRANCH);
++	chain = NULL;
++	while (*g->regparse != '\0' && *g->regparse != '|' && *g->regparse != ')') {
++		latest = regpiece(g, &flags);
++		if (latest == NULL)
++			return(NULL);
++		*flagp |= flags&HASWIDTH;
++		if (chain == NULL)	/* First piece. */
++			*flagp |= flags&SPSTART;
++		else
++			regtail(g, chain, latest);
++		chain = latest;
++	}
++	if (chain == NULL)	/* Loop ran zero times. */
++		(void) regnode(g, NOTHING);
++
++	return(ret);
++}
++
++/*
++ - regpiece - something followed by possible [*+?]
++ *
++ * Note that the branching code sequences used for ? and the general cases
++ * of * and + are somewhat optimized:  they use the same NOTHING node as
++ * both the endmarker for their branch list and the body of the last branch.
++ * It might seem that this node could be dispensed with entirely, but the
++ * endmarker role is not redundant.
++ */
++static char *
++regpiece(struct match_globals *g, int *flagp)
++{
++	register char *ret;
++	register char op;
++	register char *next;
++	int flags;
++
++	ret = regatom(g, &flags);
++	if (ret == NULL)
++		return(NULL);
++
++	op = *g->regparse;
++	if (!ISMULT(op)) {
++		*flagp = flags;
++		return(ret);
++	}
++
++	if (!(flags&HASWIDTH) && op != '?')
++		FAIL("*+ operand could be empty");
++	*flagp = (op != '+') ? (WORST|SPSTART) : (WORST|HASWIDTH);
++
++	if (op == '*' && (flags&SIMPLE))
++		reginsert(g, STAR, ret);
++	else if (op == '*') {
++		/* Emit x* as (x&|), where & means "self". */
++		reginsert(g, BRANCH, ret);			/* Either x */
++		regoptail(g, ret, regnode(g, BACK));		/* and loop */
++		regoptail(g, ret, ret);			/* back */
++		regtail(g, ret, regnode(g, BRANCH));		/* or */
++		regtail(g, ret, regnode(g, NOTHING));		/* null. */
++	} else if (op == '+' && (flags&SIMPLE))
++		reginsert(g, PLUS, ret);
++	else if (op == '+') {
++		/* Emit x+ as x(&|), where & means "self". */
++		next = regnode(g, BRANCH);			/* Either */
++		regtail(g, ret, next);
++		regtail(g, regnode(g, BACK), ret);		/* loop back */
++		regtail(g, next, regnode(g, BRANCH));		/* or */
++		regtail(g, ret, regnode(g, NOTHING));		/* null. */
++	} else if (op == '?') {
++		/* Emit x? as (x|) */
++		reginsert(g, BRANCH, ret);			/* Either x */
++		regtail(g, ret, regnode(g, BRANCH));		/* or */
++		next = regnode(g, NOTHING);		/* null. */
++		regtail(g, ret, next);
++		regoptail(g, ret, next);
++	}
++	g->regparse++;
++	if (ISMULT(*g->regparse))
++		FAIL("nested *?+");
++
++	return(ret);
++}
++
++/*
++ - regatom - the lowest level
++ *
++ * Optimization:  gobbles an entire sequence of ordinary characters so that
++ * it can turn them into a single node, which is smaller to store and
++ * faster to run.  Backslashed characters are exceptions, each becoming a
++ * separate node; the code is simpler that way and it's not worth fixing.
++ */
++static char *
++regatom(struct match_globals *g, int *flagp)
++{
++	register char *ret;
++	int flags;
++
++	*flagp = WORST;		/* Tentatively. */
++
++	switch (*g->regparse++) {
++	case '^':
++		ret = regnode(g, BOL);
++		break;
++	case '$':
++		ret = regnode(g, EOL);
++		break;
++	case '.':
++		ret = regnode(g, ANY);
++		*flagp |= HASWIDTH|SIMPLE;
++		break;
++	case '[': {
++			register int class;
++			register int classend;
++
++			if (*g->regparse == '^') {	/* Complement of range. */
++				ret = regnode(g, ANYBUT);
++				g->regparse++;
++			} else
++				ret = regnode(g, ANYOF);
++			if (*g->regparse == ']' || *g->regparse == '-')
++				regc(g, *g->regparse++);
++			while (*g->regparse != '\0' && *g->regparse != ']') {
++				if (*g->regparse == '-') {
++					g->regparse++;
++					if (*g->regparse == ']' || *g->regparse == '\0')
++						regc(g, '-');
++					else {
++						class = UCHARAT(g->regparse-2)+1;
++						classend = UCHARAT(g->regparse);
++						if (class > classend+1)
++							FAIL("invalid [] range");
++						for (; class <= classend; class++)
++							regc(g, class);
++						g->regparse++;
++					}
++				} else
++					regc(g, *g->regparse++);
++			}
++			regc(g, '\0');
++			if (*g->regparse != ']')
++				FAIL("unmatched []");
++			g->regparse++;
++			*flagp |= HASWIDTH|SIMPLE;
++		}
++		break;
++	case '(':
++		ret = reg(g, 1, &flags);
++		if (ret == NULL)
++			return(NULL);
++		*flagp |= flags&(HASWIDTH|SPSTART);
++		break;
++	case '\0':
++	case '|':
++	case ')':
++		FAIL("internal urp");	/* Supposed to be caught earlier. */
++		break;
++	case '?':
++	case '+':
++	case '*':
++		FAIL("?+* follows nothing");
++		break;
++	case '\\':
++		if (*g->regparse == '\0')
++			FAIL("trailing \\");
++		ret = regnode(g, EXACTLY);
++		regc(g, *g->regparse++);
++		regc(g, '\0');
++		*flagp |= HASWIDTH|SIMPLE;
++		break;
++	default: {
++			register int len;
++			register char ender;
++
++			g->regparse--;
++			len = my_strcspn((const char *)g->regparse, (const char *)META);
++			if (len <= 0)
++				FAIL("internal disaster");
++			ender = *(g->regparse+len);
++			if (len > 1 && ISMULT(ender))
++				len--;		/* Back off clear of ?+* operand. */
++			*flagp |= HASWIDTH;
++			if (len == 1)
++				*flagp |= SIMPLE;
++			ret = regnode(g, EXACTLY);
++			while (len > 0) {
++				regc(g, *g->regparse++);
++				len--;
++			}
++			regc(g, '\0');
++		}
++		break;
++	}
++
++	return(ret);
++}
++
++/*
++ - regnode - emit a node
++ */
++static char *			/* Location. */
++regnode(struct match_globals *g, char op)
++{
++	register char *ret;
++	register char *ptr;
++
++	ret = g->regcode;
++	if (ret == &g->regdummy) {
++		g->regsize += 3;
++		return(ret);
++	}
++
++	ptr = ret;
++	*ptr++ = op;
++	*ptr++ = '\0';		/* Null "next" pointer. */
++	*ptr++ = '\0';
++	g->regcode = ptr;
++
++	return(ret);
++}
++
++/*
++ - regc - emit (if appropriate) a byte of code
++ */
++static void
++regc(struct match_globals *g, char b)
++{
++	if (g->regcode != &g->regdummy)
++		*g->regcode++ = b;
++	else
++		g->regsize++;
++}
++
++/*
++ - reginsert - insert an operator in front of already-emitted operand
++ *
++ * Means relocating the operand.
++ */
++static void
++reginsert(struct match_globals *g, char op, char* opnd)
++{
++	register char *src;
++	register char *dst;
++	register char *place;
++
++	if (g->regcode == &g->regdummy) {
++		g->regsize += 3;
++		return;
++	}
++
++	src = g->regcode;
++	g->regcode += 3;
++	dst = g->regcode;
++	while (src > opnd)
++		*--dst = *--src;
++
++	place = opnd;		/* Op node, where operand used to be. */
++	*place++ = op;
++	*place++ = '\0';
++	*place++ = '\0';
++}
++
++/*
++ - regtail - set the next-pointer at the end of a node chain
++ */
++static void
++regtail(struct match_globals *g, char *p, char *val)
++{
++	register char *scan;
++	register char *temp;
++	register int offset;
++
++	if (p == &g->regdummy)
++		return;
++
++	/* Find last node. */
++	scan = p;
++	for (;;) {
++		temp = regnext(g, scan);
++		if (temp == NULL)
++			break;
++		scan = temp;
++	}
++
++	if (OP(scan) == BACK)
++		offset = scan - val;
++	else
++		offset = val - scan;
++	*(scan+1) = (offset>>8)&0377;
++	*(scan+2) = offset&0377;
++}
++
++/*
++ - regoptail - regtail on operand of first argument; nop if operandless
++ */
++static void
++regoptail(struct match_globals *g, char *p, char *val)
++{
++	/* "Operandless" and "op != BRANCH" are synonymous in practice. */
++	if (p == NULL || p == &g->regdummy || OP(p) != BRANCH)
++		return;
++	regtail(g, OPERAND(p), val);
++}
++
++/*
++ * regexec and friends
++ */
++
++
++/*
++ * Forwards.
++ */
++STATIC int regtry(struct match_globals *g, regexp *prog, char *string);
++STATIC int regmatch(struct match_globals *g, char *prog);
++STATIC int regrepeat(struct match_globals *g, char *p);
++
++#ifdef DEBUG
++int regnarrate = 0;
++void regdump();
++STATIC char *regprop(char *op);
++#endif
++
++/*
++ - regexec - match a regexp against a string
++ */
++int
++regexec(regexp *prog, char *string)
++{
++	register char *s;
++	struct match_globals g;
++
++	/* Be paranoid... */
++	if (prog == NULL || string == NULL) {
++		printk("<3>Regexp: NULL parameter\n");
++		return(0);
++	}
++
++	/* Check validity of program. */
++	if (UCHARAT(prog->program) != MAGIC) {
++		printk("<3>Regexp: corrupted program\n");
++		return(0);
++	}
++
++	/* If there is a "must appear" string, look for it. */
++	if (prog->regmust != NULL) {
++		s = string;
++		while ((s = strchr(s, prog->regmust[0])) != NULL) {
++			if (strncmp(s, prog->regmust, prog->regmlen) == 0)
++				break;	/* Found it. */
++			s++;
++		}
++		if (s == NULL)	/* Not present. */
++			return(0);
++	}
++
++	/* Mark beginning of line for ^ . */
++	g.regbol = string;
++
++	/* Simplest case:  anchored match need be tried only once. */
++	if (prog->reganch)
++		return(regtry(&g, prog, string));
++
++	/* Messy cases:  unanchored match. */
++	s = string;
++	if (prog->regstart != '\0')
++		/* We know what char it must start with. */
++		while ((s = strchr(s, prog->regstart)) != NULL) {
++			if (regtry(&g, prog, s))
++				return(1);
++			s++;
++		}
++	else
++		/* We don't -- general case. */
++		do {
++			if (regtry(&g, prog, s))
++				return(1);
++		} while (*s++ != '\0');
++
++	/* Failure. */
++	return(0);
++}
++
++/*
++ - regtry - try match at specific point
++ */
++static int			/* 0 failure, 1 success */
++regtry(struct match_globals *g, regexp *prog, char *string)
++{
++	register int i;
++	register char **sp;
++	register char **ep;
++
++	g->reginput = string;
++	g->regstartp = prog->startp;
++	g->regendp = prog->endp;
++
++	sp = prog->startp;
++	ep = prog->endp;
++	for (i = NSUBEXP; i > 0; i--) {
++		*sp++ = NULL;
++		*ep++ = NULL;
++	}
++	if (regmatch(g, prog->program + 1)) {
++		prog->startp[0] = string;
++		prog->endp[0] = g->reginput;
++		return(1);
++	} else
++		return(0);
++}
++
++/*
++ - regmatch - main matching routine
++ *
++ * Conceptually the strategy is simple:  check to see whether the current
++ * node matches, call self recursively to see whether the rest matches,
++ * and then act accordingly.  In practice we make some effort to avoid
++ * recursion, in particular by going through "ordinary" nodes (that don't
++ * need to know whether the rest of the match failed) by a loop instead of
++ * by recursion.
++ */
++static int			/* 0 failure, 1 success */
++regmatch(struct match_globals *g, char *prog)
++{
++	register char *scan = prog; /* Current node. */
++	char *next;		    /* Next node. */
++
++#ifdef DEBUG
++	if (scan != NULL && regnarrate)
++		fprintf(stderr, "%s(\n", regprop(scan));
++#endif
++	while (scan != NULL) {
++#ifdef DEBUG
++		if (regnarrate)
++			fprintf(stderr, "%s...\n", regprop(scan));
++#endif
++		next = regnext(g, scan);
++
++		switch (OP(scan)) {
++		case BOL:
++			if (g->reginput != g->regbol)
++				return(0);
++			break;
++		case EOL:
++			if (*g->reginput != '\0')
++				return(0);
++			break;
++		case ANY:
++			if (*g->reginput == '\0')
++				return(0);
++			g->reginput++;
++			break;
++		case EXACTLY: {
++				register int len;
++				register char *opnd;
++
++				opnd = OPERAND(scan);
++				/* Inline the first character, for speed. */
++				if (*opnd != *g->reginput)
++					return(0);
++				len = strlen(opnd);
++				if (len > 1 && strncmp(opnd, g->reginput, len) != 0)
++					return(0);
++				g->reginput += len;
++			}
++			break;
++		case ANYOF:
++			if (*g->reginput == '\0' || strchr(OPERAND(scan), *g->reginput) == NULL)
++				return(0);
++			g->reginput++;
++			break;
++		case ANYBUT:
++			if (*g->reginput == '\0' || strchr(OPERAND(scan), *g->reginput) != NULL)
++				return(0);
++			g->reginput++;
++			break;
++		case NOTHING:
++		case BACK:
++			break;
++		case OPEN+1:
++		case OPEN+2:
++		case OPEN+3:
++		case OPEN+4:
++		case OPEN+5:
++		case OPEN+6:
++		case OPEN+7:
++		case OPEN+8:
++		case OPEN+9: {
++				register int no;
++				register char *save;
++
++				no = OP(scan) - OPEN;
++				save = g->reginput;
++
++				if (regmatch(g, next)) {
++					/*
++					 * Don't set startp if some later
++					 * invocation of the same parentheses
++					 * already has.
++					 */
++					if (g->regstartp[no] == NULL)
++						g->regstartp[no] = save;
++					return(1);
++				} else
++					return(0);
++			}
++			break;
++		case CLOSE+1:
++		case CLOSE+2:
++		case CLOSE+3:
++		case CLOSE+4:
++		case CLOSE+5:
++		case CLOSE+6:
++		case CLOSE+7:
++		case CLOSE+8:
++		case CLOSE+9:
++			{
++				register int no;
++				register char *save;
++
++				no = OP(scan) - CLOSE;
++				save = g->reginput;
++
++				if (regmatch(g, next)) {
++					/*
++					 * Don't set endp if some later
++					 * invocation of the same parentheses
++					 * already has.
++					 */
++					if (g->regendp[no] == NULL)
++						g->regendp[no] = save;
++					return(1);
++				} else
++					return(0);
++			}
++			break;
++		case BRANCH: {
++				register char *save;
++
++				if (OP(next) != BRANCH)		/* No choice. */
++					next = OPERAND(scan);	/* Avoid recursion. */
++				else {
++					do {
++						save = g->reginput;
++						if (regmatch(g, OPERAND(scan)))
++							return(1);
++						g->reginput = save;
++						scan = regnext(g, scan);
++					} while (scan != NULL && OP(scan) == BRANCH);
++					return(0);
++					/* NOTREACHED */
++				}
++			}
++			break;
++		case STAR:
++		case PLUS: {
++				register char nextch;
++				register int no;
++				register char *save;
++				register int min;
++
++				/*
++				 * Lookahead to avoid useless match attempts
++				 * when we know what character comes next.
++				 */
++				nextch = '\0';
++				if (OP(next) == EXACTLY)
++					nextch = *OPERAND(next);
++				min = (OP(scan) == STAR) ? 0 : 1;
++				save = g->reginput;
++				no = regrepeat(g, OPERAND(scan));
++				while (no >= min) {
++					/* If it could work, try it. */
++					if (nextch == '\0' || *g->reginput == nextch)
++						if (regmatch(g, next))
++							return(1);
++					/* Couldn't or didn't -- back up. */
++					no--;
++					g->reginput = save + no;
++				}
++				return(0);
++			}
++			break;
++		case END:
++			return(1);	/* Success! */
++			break;
++		default:
++			printk("<3>Regexp: memory corruption\n");
++			return(0);
++			break;
++		}
++
++		scan = next;
++	}
++
++	/*
++	 * We get here only if there's trouble -- normally "case END" is
++	 * the terminating point.
++	 */
++	printk("<3>Regexp: corrupted pointers\n");
++	return(0);
++}
++
++/*
++ - regrepeat - repeatedly match something simple, report how many
++ */
++static int
++regrepeat(struct match_globals *g, char *p)
++{
++	register int count = 0;
++	register char *scan;
++	register char *opnd;
++
++	scan = g->reginput;
++	opnd = OPERAND(p);
++	switch (OP(p)) {
++	case ANY:
++		count = strlen(scan);
++		scan += count;
++		break;
++	case EXACTLY:
++		while (*opnd == *scan) {
++			count++;
++			scan++;
++		}
++		break;
++	case ANYOF:
++		while (*scan != '\0' && strchr(opnd, *scan) != NULL) {
++			count++;
++			scan++;
++		}
++		break;
++	case ANYBUT:
++		while (*scan != '\0' && strchr(opnd, *scan) == NULL) {
++			count++;
++			scan++;
++		}
++		break;
++	default:		/* Oh dear.  Called inappropriately. */
++		printk("<3>Regexp: internal foulup\n");
++		count = 0;	/* Best compromise. */
++		break;
++	}
++	g->reginput = scan;
++
++	return(count);
++}
++
++/*
++ - regnext - dig the "next" pointer out of a node
++ */
++static char*
++regnext(struct match_globals *g, char *p)
++{
++	register int offset;
++
++	if (p == &g->regdummy)
++		return(NULL);
++
++	offset = NEXT(p);
++	if (offset == 0)
++		return(NULL);
++
++	if (OP(p) == BACK)
++		return(p-offset);
++	else
++		return(p+offset);
++}
++
++#ifdef DEBUG
++
++STATIC char *regprop();
++
++/*
++ - regdump - dump a regexp onto stdout in vaguely comprehensible form
++ */
++void
++regdump(regexp *r)
++{
++	register char *s;
++	register char op = EXACTLY;	/* Arbitrary non-END op. */
++	register char *next;
++	/* extern char *strchr(); */
++
++
++	s = r->program + 1;
++	while (op != END) {	/* While that wasn't END last time... */
++		op = OP(s);
++		printf("%2d%s", s-r->program, regprop(s));	/* Where, what. */
++		next = regnext(s);
++		if (next == NULL)		/* Next ptr. */
++			printf("(0)");
++		else
++			printf("(%d)", (s-r->program)+(next-s));
++		s += 3;
++		if (op == ANYOF || op == ANYBUT || op == EXACTLY) {
++			/* Literal string, where present. */
++			while (*s != '\0') {
++				putchar(*s);
++				s++;
++			}
++			s++;
++		}
++		putchar('\n');
++	}
++
++	/* Header fields of interest. */
++	if (r->regstart != '\0')
++		printf("start `%c' ", r->regstart);
++	if (r->reganch)
++		printf("anchored ");
++	if (r->regmust != NULL)
++		printf("must have \"%s\"", r->regmust);
++	printf("\n");
++}
++
++/*
++ - regprop - printable representation of opcode
++ */
++static char *
++regprop(char *op)
++{
++#define BUFLEN 50
++	register char *p;
++	static char buf[BUFLEN];
++
++	strcpy(buf, ":");
++
++	switch (OP(op)) {
++	case BOL:
++		p = "BOL";
++		break;
++	case EOL:
++		p = "EOL";
++		break;
++	case ANY:
++		p = "ANY";
++		break;
++	case ANYOF:
++		p = "ANYOF";
++		break;
++	case ANYBUT:
++		p = "ANYBUT";
++		break;
++	case BRANCH:
++		p = "BRANCH";
++		break;
++	case EXACTLY:
++		p = "EXACTLY";
++		break;
++	case NOTHING:
++		p = "NOTHING";
++		break;
++	case BACK:
++		p = "BACK";
++		break;
++	case END:
++		p = "END";
++		break;
++	case OPEN+1:
++	case OPEN+2:
++	case OPEN+3:
++	case OPEN+4:
++	case OPEN+5:
++	case OPEN+6:
++	case OPEN+7:
++	case OPEN+8:
++	case OPEN+9:
++		snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "OPEN%d", OP(op)-OPEN);
++		p = NULL;
++		break;
++	case CLOSE+1:
++	case CLOSE+2:
++	case CLOSE+3:
++	case CLOSE+4:
++	case CLOSE+5:
++	case CLOSE+6:
++	case CLOSE+7:
++	case CLOSE+8:
++	case CLOSE+9:
++		snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "CLOSE%d", OP(op)-CLOSE);
++		p = NULL;
++		break;
++	case STAR:
++		p = "STAR";
++		break;
++	case PLUS:
++		p = "PLUS";
++		break;
++	default:
++		printk("<3>Regexp: corrupted opcode\n");
++		break;
++	}
++	if (p != NULL)
++		strncat(buf, p, BUFLEN-strlen(buf));
++	return(buf);
++}
++#endif
++
++
+--- /dev/null
++++ b/net/netfilter/regexp/regexp.h
+@@ -0,0 +1,41 @@
++/*
++ * Definitions etc. for regexp(3) routines.
++ *
++ * Caveat:  this is V8 regexp(3) [actually, a reimplementation thereof],
++ * not the System V one.
++ */
++
++#ifndef REGEXP_H
++#define REGEXP_H
++
++
++/*
++http://www.opensource.apple.com/darwinsource/10.3/expect-1/expect/expect.h ,
++which contains a version of this library, says:
++
++ *
++ * NSUBEXP must be at least 10, and no greater than 117 or the parser
++ * will not work properly.
++ *
++
++However, it looks rather like this library is limited to 10.  If you think
++otherwise, let us know.
++*/
++
++#define NSUBEXP  10
++typedef struct regexp {
++	char *startp[NSUBEXP];
++	char *endp[NSUBEXP];
++	char regstart;		/* Internal use only. */
++	char reganch;		/* Internal use only. */
++	char *regmust;		/* Internal use only. */
++	int regmlen;		/* Internal use only. */
++	char program[1];	/* Unwarranted chumminess with compiler. */
++} regexp;
++
++regexp * regcomp(char *exp, int *patternsize);
++int regexec(regexp *prog, char *string);
++void regsub(regexp *prog, char *source, char *dest);
++void regerror(char *s);
++
++#endif
+--- /dev/null
++++ b/net/netfilter/regexp/regmagic.h
+@@ -0,0 +1,5 @@
++/*
++ * The first byte of the regexp internal "program" is actually this magic
++ * number; the start node begins in the second byte.
++ */
++#define	MAGIC	0234
+--- /dev/null
++++ b/net/netfilter/regexp/regsub.c
+@@ -0,0 +1,95 @@
++/*
++ * regsub
++ * @(#)regsub.c	1.3 of 2 April 86
++ *
++ *	Copyright (c) 1986 by University of Toronto.
++ *	Written by Henry Spencer.  Not derived from licensed software.
++ *
++ *	Permission is granted to anyone to use this software for any
++ *	purpose on any computer system, and to redistribute it freely,
++ *	subject to the following restrictions:
++ *
++ *	1. The author is not responsible for the consequences of use of
++ *		this software, no matter how awful, even if they arise
++ *		from defects in it.
++ *
++ *	2. The origin of this software must not be misrepresented, either
++ *		by explicit claim or by omission.
++ *
++ *	3. Altered versions must be plainly marked as such, and must not
++ *		be misrepresented as being the original software.
++ *
++ *
++ * This code was modified by Ethan Sommer to work within the kernel
++ * (it now uses kmalloc etc..)
++ *
++ */
++#include "regexp.h"
++#include "regmagic.h"
++#include <linux/string.h>
++
++
++#ifndef CHARBITS
++#define	UCHARAT(p)	((int)*(unsigned char *)(p))
++#else
++#define	UCHARAT(p)	((int)*(p)&CHARBITS)
++#endif
++
++#if 0
++//void regerror(char * s)
++//{
++//        printk("regexp(3): %s", s);
++//        /* NOTREACHED */
++//}
++#endif
++
++/*
++ - regsub - perform substitutions after a regexp match
++ */
++void
++regsub(regexp * prog, char * source, char * dest)
++{
++	register char *src;
++	register char *dst;
++	register char c;
++	register int no;
++	register int len;
++	
++	/* Not necessary and gcc doesn't like it -MLS */
++	/*extern char *strncpy();*/
++
++	if (prog == NULL || source == NULL || dest == NULL) {
++		regerror("NULL parm to regsub");
++		return;
++	}
++	if (UCHARAT(prog->program) != MAGIC) {
++		regerror("damaged regexp fed to regsub");
++		return;
++	}
++
++	src = source;
++	dst = dest;
++	while ((c = *src++) != '\0') {
++		if (c == '&')
++			no = 0;
++		else if (c == '\\' && '0' <= *src && *src <= '9')
++			no = *src++ - '0';
++		else
++			no = -1;
++
++		if (no < 0) {	/* Ordinary character. */
++			if (c == '\\' && (*src == '\\' || *src == '&'))
++				c = *src++;
++			*dst++ = c;
++		} else if (prog->startp[no] != NULL && prog->endp[no] != NULL) {
++			len = prog->endp[no] - prog->startp[no];
++			(void) strncpy(dst, prog->startp[no], len);
++			dst += len;
++			if (len != 0 && *(dst-1) == '\0') {	/* strncpy hit NUL. */
++				regerror("damaged match string");
++				return;
++			}
++		}
++	}
++	*dst++ = '\0';
++}
+--- /dev/null
++++ b/net/netfilter/xt_layer7.c
+@@ -0,0 +1,666 @@
++/*
++  Kernel module to match application layer (OSI layer 7) data in connections.
++
++  http://l7-filter.sf.net
++
++  (C) 2003-2009 Matthew Strait and Ethan Sommer.
++
++  This program is free software; you can redistribute it and/or
++  modify it under the terms of the GNU General Public License
++  as published by the Free Software Foundation; either version
++  2 of the License, or (at your option) any later version.
++  http://www.gnu.org/licenses/gpl.txt
++
++  Based on ipt_string.c (C) 2000 Emmanuel Roger <winfield@freegates.be>,
++  xt_helper.c (C) 2002 Harald Welte and cls_layer7.c (C) 2003 Matthew Strait,
++  Ethan Sommer, Justin Levandoski.
++*/
++
++#include <linux/spinlock.h>
++#include <linux/version.h>
++#include <net/ip.h>
++#include <net/tcp.h>
++#include <linux/module.h>
++#include <linux/skbuff.h>
++#include <linux/netfilter.h>
++#include <net/netfilter/nf_conntrack.h>
++#include <net/netfilter/nf_conntrack_core.h>
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)
++#include <net/netfilter/nf_conntrack_extend.h>
++#include <net/netfilter/nf_conntrack_acct.h>
++#endif
++#include <linux/netfilter/x_tables.h>
++#include <linux/netfilter/xt_layer7.h>
++#include <linux/ctype.h>
++#include <linux/proc_fs.h>
++
++#include "regexp/regexp.c"
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Matthew Strait <quadong@users.sf.net>, Ethan Sommer <sommere@users.sf.net>");
++MODULE_DESCRIPTION("iptables application layer match module");
++MODULE_ALIAS("ipt_layer7");
++MODULE_VERSION("2.21");
++
++static int maxdatalen = 2048; // this is the default
++module_param(maxdatalen, int, 0444);
++MODULE_PARM_DESC(maxdatalen, "maximum bytes of data looked at by l7-filter");
++#ifdef CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG
++	#define DPRINTK(format,args...) printk(format,##args)
++#else
++	#define DPRINTK(format,args...)
++#endif
++
++/* Number of packets whose data we look at.
++This can be modified through /proc/net/layer7_numpackets */
++static int num_packets = 10;
++
++static struct pattern_cache {
++	char * regex_string;
++	regexp * pattern;
++	struct pattern_cache * next;
++} * first_pattern_cache = NULL;
++
++DEFINE_SPINLOCK(l7_lock);
++
++static int total_acct_packets(struct nf_conn *ct)
++{
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 26)
++	BUG_ON(ct == NULL);
++	return (ct->counters[IP_CT_DIR_ORIGINAL].packets + ct->counters[IP_CT_DIR_REPLY].packets);
++#else
++	struct nf_conn_counter *acct;
++
++	BUG_ON(ct == NULL);
++	acct = nf_conn_acct_find(ct);
++	if (!acct)
++		return 0;
++	return (acct[IP_CT_DIR_ORIGINAL].packets + acct[IP_CT_DIR_REPLY].packets);
++#endif
++}
++
++#ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG
++/* Converts an unfriendly string into a friendly one by
++replacing unprintables with periods and all whitespace with " ". */
++static char * friendly_print(unsigned char * s)
++{
++	char * f = kmalloc(strlen(s) + 1, GFP_ATOMIC);
++	int i;
++
++	if(!f) {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory in "
++					"friendly_print, bailing.\n");
++		return NULL;
++	}
++
++	for(i = 0; i < strlen(s); i++){
++		if(isprint(s[i]) && s[i] < 128)	f[i] = s[i];
++		else if(isspace(s[i]))		f[i] = ' ';
++		else 				f[i] = '.';
++	}
++	f[i] = '\0';
++	return f;
++}
++
++static char dec2hex(int i)
++{
++	switch (i) {
++		case 0 ... 9:
++			return (i + '0');
++			break;
++		case 10 ... 15:
++			return (i - 10 + 'a');
++			break;
++		default:
++			if (net_ratelimit())
++				printk("layer7: Problem in dec2hex\n");
++			return '\0';
++	}
++}
++
++static char * hex_print(unsigned char * s)
++{
++	char * g = kmalloc(strlen(s)*3 + 1, GFP_ATOMIC);
++	int i;
++
++	if(!g) {
++	       if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory in hex_print, "
++					"bailing.\n");
++	       return NULL;
++	}
++
++	for(i = 0; i < strlen(s); i++) {
++		g[i*3    ] = dec2hex(s[i]/16);
++		g[i*3 + 1] = dec2hex(s[i]%16);
++		g[i*3 + 2] = ' ';
++	}
++	g[i*3] = '\0';
++
++	return g;
++}
++#endif // DEBUG
++
++/* Use instead of regcomp.  As we expect to be seeing the same regexps over and
++over again, it make sense to cache the results. */
++static regexp * compile_and_cache(const char * regex_string, 
++                                  const char * protocol)
++{
++	struct pattern_cache * node               = first_pattern_cache;
++	struct pattern_cache * last_pattern_cache = first_pattern_cache;
++	struct pattern_cache * tmp;
++	unsigned int len;
++
++	while (node != NULL) {
++		if (!strcmp(node->regex_string, regex_string))
++		return node->pattern;
++
++		last_pattern_cache = node;/* points at the last non-NULL node */
++		node = node->next;
++	}
++
++	/* If we reach the end of the list, then we have not yet cached
++	   the pattern for this regex. Let's do that now.
++	   Be paranoid about running out of memory to avoid list corruption. */
++	tmp = kmalloc(sizeof(struct pattern_cache), GFP_ATOMIC);
++
++	if(!tmp) {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory in "
++					"compile_and_cache, bailing.\n");
++		return NULL;
++	}
++
++	tmp->regex_string  = kmalloc(strlen(regex_string) + 1, GFP_ATOMIC);
++	tmp->pattern       = kmalloc(sizeof(struct regexp),    GFP_ATOMIC);
++	tmp->next = NULL;
++
++	if(!tmp->regex_string || !tmp->pattern) {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory in "
++					"compile_and_cache, bailing.\n");
++		kfree(tmp->regex_string);
++		kfree(tmp->pattern);
++		kfree(tmp);
++		return NULL;
++	}
++
++	/* Ok.  The new node is all ready now. */
++	node = tmp;
++
++	if(first_pattern_cache == NULL) /* list is empty */
++		first_pattern_cache = node; /* make node the beginning */
++	else
++		last_pattern_cache->next = node; /* attach node to the end */
++
++	/* copy the string and compile the regex */
++	len = strlen(regex_string);
++	DPRINTK("About to compile this: \"%s\"\n", regex_string);
++	node->pattern = regcomp((char *)regex_string, &len);
++	if ( !node->pattern ) {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: Error compiling regexp "
++					"\"%s\" (%s)\n", 
++					regex_string, protocol);
++		/* pattern is now cached as NULL, so we won't try again. */
++	}
++
++	strcpy(node->regex_string, regex_string);
++	return node->pattern;
++}
++
++static int can_handle(const struct sk_buff *skb)
++{
++	if(!ip_hdr(skb)) /* not IP */
++		return 0;
++	if(ip_hdr(skb)->protocol != IPPROTO_TCP &&
++	   ip_hdr(skb)->protocol != IPPROTO_UDP &&
++	   ip_hdr(skb)->protocol != IPPROTO_ICMP)
++		return 0;
++	return 1;
++}
++
++/* Returns offset the into the skb->data that the application data starts */
++static int app_data_offset(const struct sk_buff *skb)
++{
++	/* In case we are ported somewhere (ebtables?) where ip_hdr(skb)
++	isn't set, this can be gotten from 4*(skb->data[0] & 0x0f) as well. */
++	int ip_hl = 4*ip_hdr(skb)->ihl;
++
++	if( ip_hdr(skb)->protocol == IPPROTO_TCP ) {
++		/* 12 == offset into TCP header for the header length field.
++		Can't get this with skb->h.th->doff because the tcphdr
++		struct doesn't get set when routing (this is confirmed to be
++		true in Netfilter as well as QoS.) */
++		int tcp_hl = 4*(skb->data[ip_hl + 12] >> 4);
++
++		return ip_hl + tcp_hl;
++	} else if( ip_hdr(skb)->protocol == IPPROTO_UDP  ) {
++		return ip_hl + 8; /* UDP header is always 8 bytes */
++	} else if( ip_hdr(skb)->protocol == IPPROTO_ICMP ) {
++		return ip_hl + 8; /* ICMP header is 8 bytes */
++	} else {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: tried to handle unknown "
++					"protocol!\n");
++		return ip_hl + 8; /* something reasonable */
++	}
++}
++
++/* handles whether there's a match when we aren't appending data anymore */
++static int match_no_append(struct nf_conn * conntrack, 
++                           struct nf_conn * master_conntrack, 
++                           enum ip_conntrack_info ctinfo,
++                           enum ip_conntrack_info master_ctinfo,
++                           const struct xt_layer7_info * info)
++{
++	/* If we're in here, throw the app data away */
++	if(master_conntrack->layer7.app_data != NULL) {
++
++	#ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG
++		if(!master_conntrack->layer7.app_proto) {
++			char * f = 
++			  friendly_print(master_conntrack->layer7.app_data);
++			char * g = 
++			  hex_print(master_conntrack->layer7.app_data);
++			DPRINTK("\nl7-filter gave up after %d bytes "
++				"(%d packets):\n%s\n",
++				strlen(f), total_acct_packets(master_conntrack), f);
++			kfree(f);
++			DPRINTK("In hex: %s\n", g);
++			kfree(g);
++		}
++	#endif
++
++		kfree(master_conntrack->layer7.app_data);
++		master_conntrack->layer7.app_data = NULL; /* don't free again */
++	}
++
++	if(master_conntrack->layer7.app_proto){
++		/* Here child connections set their .app_proto (for /proc) */
++		if(!conntrack->layer7.app_proto) {
++			conntrack->layer7.app_proto = 
++			  kmalloc(strlen(master_conntrack->layer7.app_proto)+1, 
++			    GFP_ATOMIC);
++			if(!conntrack->layer7.app_proto){
++				if (net_ratelimit())
++					printk(KERN_ERR "layer7: out of memory "
++							"in match_no_append, "
++							"bailing.\n");
++				return 1;
++			}
++			strcpy(conntrack->layer7.app_proto, 
++				master_conntrack->layer7.app_proto);
++		}
++
++		return (!strcmp(master_conntrack->layer7.app_proto, 
++				info->protocol));
++	}
++	else {
++		/* If not classified, set to "unknown" to distinguish from
++		connections that are still being tested. */
++		master_conntrack->layer7.app_proto = 
++			kmalloc(strlen("unknown")+1, GFP_ATOMIC);
++		if(!master_conntrack->layer7.app_proto){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: out of memory in "
++						"match_no_append, bailing.\n");
++			return 1;
++		}
++		strcpy(master_conntrack->layer7.app_proto, "unknown");
++		return 0;
++	}
++}
++
++/* add the new app data to the conntrack.  Return number of bytes added. */
++static int add_data(struct nf_conn * master_conntrack,
++                    char * app_data, int appdatalen)
++{
++	int length = 0, i;
++	int oldlength = master_conntrack->layer7.app_data_len;
++
++	/* This is a fix for a race condition by Deti Fliegl. However, I'm not 
++	   clear on whether the race condition exists or whether this really 
++	   fixes it.  I might just be being dense... Anyway, if it's not really 
++	   a fix, all it does is waste a very small amount of time. */
++	if(!master_conntrack->layer7.app_data) return 0;
++
++	/* Strip nulls. Make everything lower case (our regex lib doesn't
++	do case insensitivity).  Add it to the end of the current data. */
++	for(i = 0; i < maxdatalen-oldlength-1 &&
++		   i < appdatalen; i++) {
++		if(app_data[i] != '\0') {
++			/* the kernel version of tolower mungs 'upper ascii' */
++			master_conntrack->layer7.app_data[length+oldlength] =
++				isascii(app_data[i])? 
++					tolower(app_data[i]) : app_data[i];
++			length++;
++		}
++	}
++
++	master_conntrack->layer7.app_data[length+oldlength] = '\0';
++	master_conntrack->layer7.app_data_len = length + oldlength;
++
++	return length;
++}
++
++/* taken from drivers/video/modedb.c */
++static int my_atoi(const char *s)
++{
++	int val = 0;
++
++	for (;; s++) {
++		switch (*s) {
++			case '0'...'9':
++			val = 10*val+(*s-'0');
++			break;
++		default:
++			return val;
++		}
++	}
++}
++
++/* write out num_packets to userland. */
++static int layer7_read_proc(char* page, char ** start, off_t off, int count,
++                            int* eof, void * data)
++{
++	if(num_packets > 99 && net_ratelimit())
++		printk(KERN_ERR "layer7: NOT REACHED. num_packets too big\n");
++
++	page[0] = num_packets/10 + '0';
++	page[1] = num_packets%10 + '0';
++	page[2] = '\n';
++	page[3] = '\0';
++
++	*eof=1;
++
++	return 3;
++}
++
++/* Read in num_packets from userland */
++static int layer7_write_proc(struct file* file, const char* buffer,
++                             unsigned long count, void *data)
++{
++	char * foo = kmalloc(count, GFP_ATOMIC);
++
++	if(!foo){
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory, bailing. "
++					"num_packets unchanged.\n");
++		return count;
++	}
++
++	if(copy_from_user(foo, buffer, count)) {
++		return -EFAULT;
++	}
++
++
++	num_packets = my_atoi(foo);
++	kfree (foo);
++
++	/* This has an arbitrary limit to make the math easier. I'm lazy.
++	But anyway, 99 is a LOT! If you want more, you're doing it wrong! */
++	if(num_packets > 99) {
++		printk(KERN_WARNING "layer7: num_packets can't be > 99.\n");
++		num_packets = 99;
++	} else if(num_packets < 1) {
++		printk(KERN_WARNING "layer7: num_packets can't be < 1.\n");
++		num_packets = 1;
++	}
++
++	return count;
++}
++
++static bool
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++match(const struct sk_buff *skbin, const struct xt_match_param *par)
++#else
++match(const struct sk_buff *skbin,
++      const struct net_device *in,
++      const struct net_device *out,
++      const struct xt_match *match,
++      const void *matchinfo,
++      int offset,
++      unsigned int protoff,
++      bool *hotdrop)
++#endif
++{
++	/* sidestep const without getting a compiler warning... */
++	struct sk_buff * skb = (struct sk_buff *)skbin; 
++
++	const struct xt_layer7_info * info = 
++	#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++		par->matchinfo;
++	#else
++		matchinfo;
++	#endif
++
++	enum ip_conntrack_info master_ctinfo, ctinfo;
++	struct nf_conn *master_conntrack, *conntrack;
++	unsigned char * app_data;
++	unsigned int pattern_result, appdatalen;
++	regexp * comppattern;
++
++	/* Be paranoid/incompetent - lock the entire match function. */
++	spin_lock_bh(&l7_lock);
++
++	if(!can_handle(skb)){
++		DPRINTK("layer7: This is some protocol I can't handle.\n");
++		spin_unlock_bh(&l7_lock);
++		return info->invert;
++	}
++
++	/* Treat parent & all its children together as one connection, except
++	for the purpose of setting conntrack->layer7.app_proto in the actual
++	connection. This makes /proc/net/ip_conntrack more satisfying. */
++	if(!(conntrack = nf_ct_get(skb, &ctinfo)) ||
++	   !(master_conntrack=nf_ct_get(skb,&master_ctinfo))){
++		DPRINTK("layer7: couldn't get conntrack.\n");
++		spin_unlock_bh(&l7_lock);
++		return info->invert;
++	}
++
++	/* Try to get a master conntrack (and its master etc) for FTP, etc. */
++	while (master_ct(master_conntrack) != NULL)
++		master_conntrack = master_ct(master_conntrack);
++
++	/* if we've classified it or seen too many packets */
++	if(total_acct_packets(master_conntrack) > num_packets ||
++	   master_conntrack->layer7.app_proto) {
++
++		pattern_result = match_no_append(conntrack, master_conntrack, 
++						 ctinfo, master_ctinfo, info);
++
++		/* skb->cb[0] == seen. Don't do things twice if there are 
++		multiple l7 rules. I'm not sure that using cb for this purpose 
++		is correct, even though it says "put your private variables 
++		there". But it doesn't look like it is being used for anything
++		else in the skbs that make it here. */
++		skb->cb[0] = 1; /* marking it seen here's probably irrelevant */
++
++		spin_unlock_bh(&l7_lock);
++		return (pattern_result ^ info->invert);
++	}
++
++	if(skb_is_nonlinear(skb)){
++		if(skb_linearize(skb) != 0){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: failed to linearize "
++						"packet, bailing.\n");
++			spin_unlock_bh(&l7_lock);
++			return info->invert;
++		}
++	}
++
++	/* now that the skb is linearized, it's safe to set these. */
++	app_data = skb->data + app_data_offset(skb);
++	appdatalen = skb_tail_pointer(skb) - app_data;
++
++	/* the return value gets checked later, when we're ready to use it */
++	comppattern = compile_and_cache(info->pattern, info->protocol);
++
++	/* On the first packet of a connection, allocate space for app data */
++	if(total_acct_packets(master_conntrack) == 1 && !skb->cb[0] && 
++	   !master_conntrack->layer7.app_data){
++		master_conntrack->layer7.app_data = 
++			kmalloc(maxdatalen, GFP_ATOMIC);
++		if(!master_conntrack->layer7.app_data){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: out of memory in "
++						"match, bailing.\n");
++			spin_unlock_bh(&l7_lock);
++			return info->invert;
++		}
++
++		master_conntrack->layer7.app_data[0] = '\0';
++	}
++
++	/* Can be here, but unallocated, if numpackets is increased near
++	the beginning of a connection */
++	if(master_conntrack->layer7.app_data == NULL){
++		spin_unlock_bh(&l7_lock);
++		return info->invert; /* unmatched */
++	}
++
++	if(!skb->cb[0]){
++		int newbytes;
++		newbytes = add_data(master_conntrack, app_data, appdatalen);
++
++		if(newbytes == 0) { /* didn't add any data */
++			skb->cb[0] = 1;
++			/* Didn't match before, not going to match now */
++			spin_unlock_bh(&l7_lock);
++			return info->invert;
++		}
++	}
++
++	/* If looking for "unknown", then never match.  "Unknown" means that
++	we've given up; we're still trying with these packets. */
++	if(!strcmp(info->protocol, "unknown")) {
++		pattern_result = 0;
++	/* If looking for "unset", then always match. "Unset" means that we
++	haven't yet classified the connection. */
++	} else if(!strcmp(info->protocol, "unset")) {
++		pattern_result = 2;
++		DPRINTK("layer7: matched unset: not yet classified "
++			"(%d/%d packets)\n",
++                        total_acct_packets(master_conntrack), num_packets);
++	/* If the regexp failed to compile, don't bother running it */
++	} else if(comppattern && 
++		  regexec(comppattern, master_conntrack->layer7.app_data)){
++		DPRINTK("layer7: matched %s\n", info->protocol);
++		pattern_result = 1;
++	} else pattern_result = 0;
++
++	if(pattern_result == 1) {
++		master_conntrack->layer7.app_proto = 
++			kmalloc(strlen(info->protocol)+1, GFP_ATOMIC);
++		if(!master_conntrack->layer7.app_proto){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: out of memory in "
++						"match, bailing.\n");
++			spin_unlock_bh(&l7_lock);
++			return (pattern_result ^ info->invert);
++		}
++		strcpy(master_conntrack->layer7.app_proto, info->protocol);
++	} else if(pattern_result > 1) { /* cleanup from "unset" */
++		pattern_result = 1;
++	}
++
++	/* mark the packet seen */
++	skb->cb[0] = 1;
++
++	spin_unlock_bh(&l7_lock);
++	return (pattern_result ^ info->invert);
++}
++
++// load nf_conntrack_ipv4
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++static bool check(const struct xt_mtchk_param *par)
++{
++        if (nf_ct_l3proto_try_module_get(par->match->family) < 0) {
++                printk(KERN_WARNING "can't load conntrack support for "
++                                    "proto=%d\n", par->match->family);
++#else
++static bool check(const char *tablename, const void *inf,
++		 const struct xt_match *match, void *matchinfo,
++		 unsigned int hook_mask)
++{
++        if (nf_ct_l3proto_try_module_get(match->family) < 0) {
++                printk(KERN_WARNING "can't load conntrack support for "
++                                    "proto=%d\n", match->family);
++#endif
++                return 0;
++        }
++	return 1;
++}
++
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++	static void destroy(const struct xt_mtdtor_param *par)
++	{
++		nf_ct_l3proto_module_put(par->match->family);
++	}
++#else
++	static void destroy(const struct xt_match *match, void *matchinfo)
++	{
++		nf_ct_l3proto_module_put(match->family);
++	}
++#endif
++
++static struct xt_match xt_layer7_match[] __read_mostly = {
++{
++	.name		= "layer7",
++	.family		= AF_INET,
++	.checkentry	= check,
++	.match		= match,
++	.destroy	= destroy,
++	.matchsize	= sizeof(struct xt_layer7_info),
++	.me		= THIS_MODULE
++}
++};
++
++static void layer7_cleanup_proc(void)
++{
++	remove_proc_entry("layer7_numpackets", init_net.proc_net);
++}
++
++/* register the proc file */
++static void layer7_init_proc(void)
++{
++	struct proc_dir_entry* entry;
++	entry = create_proc_entry("layer7_numpackets", 0644, init_net.proc_net);
++	entry->read_proc = layer7_read_proc;
++	entry->write_proc = layer7_write_proc;
++}
++
++static int __init xt_layer7_init(void)
++{
++	need_conntrack();
++
++	layer7_init_proc();
++	if(maxdatalen < 1) {
++		printk(KERN_WARNING "layer7: maxdatalen can't be < 1, "
++			"using 1\n");
++		maxdatalen = 1;
++	}
++	/* This is not a hard limit.  It's just here to prevent people from
++	bringing their slow machines to a grinding halt. */
++	else if(maxdatalen > 65536) {
++		printk(KERN_WARNING "layer7: maxdatalen can't be > 65536, "
++			"using 65536\n");
++		maxdatalen = 65536;
++	}
++	return xt_register_matches(xt_layer7_match,
++				   ARRAY_SIZE(xt_layer7_match));
++}
++
++static void __exit xt_layer7_fini(void)
++{
++	layer7_cleanup_proc();
++	xt_unregister_matches(xt_layer7_match, ARRAY_SIZE(xt_layer7_match));
++}
++
++module_init(xt_layer7_init);
++module_exit(xt_layer7_fini);
diff --git a/target/linux/generic/patches-2.6.25/101-netfilter_layer7_pktmatch.patch b/target/linux/generic/patches-2.6.25/101-netfilter_layer7_pktmatch.patch
new file mode 100644
index 0000000000..7b0dd43c0b
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/101-netfilter_layer7_pktmatch.patch
@@ -0,0 +1,110 @@
+--- a/include/linux/netfilter/xt_layer7.h
++++ b/include/linux/netfilter/xt_layer7.h
+@@ -8,6 +8,7 @@ struct xt_layer7_info {
+     char protocol[MAX_PROTOCOL_LEN];
+     char pattern[MAX_PATTERN_LEN];
+     u_int8_t invert;
++    u_int8_t pkt;
+ };
+ 
+ #endif /* _XT_LAYER7_H */
+--- a/net/netfilter/xt_layer7.c
++++ b/net/netfilter/xt_layer7.c
+@@ -314,34 +314,36 @@ static int match_no_append(struct nf_con
+ }
+ 
+ /* add the new app data to the conntrack.  Return number of bytes added. */
+-static int add_data(struct nf_conn * master_conntrack,
+-                    char * app_data, int appdatalen)
++static int add_datastr(char *target, int offset, char *app_data, int len)
+ {
+ 	int length = 0, i;
+-	int oldlength = master_conntrack->layer7.app_data_len;
+-
+-	/* This is a fix for a race condition by Deti Fliegl. However, I'm not 
+-	   clear on whether the race condition exists or whether this really 
+-	   fixes it.  I might just be being dense... Anyway, if it's not really 
+-	   a fix, all it does is waste a very small amount of time. */
+-	if(!master_conntrack->layer7.app_data) return 0;
++	
++	if (!target) return 0;
+ 
+ 	/* Strip nulls. Make everything lower case (our regex lib doesn't
+ 	do case insensitivity).  Add it to the end of the current data. */
+-	for(i = 0; i < maxdatalen-oldlength-1 &&
+-		   i < appdatalen; i++) {
++	for(i = 0; i < maxdatalen-offset-1 && i < len; i++) {
+ 		if(app_data[i] != '\0') {
+ 			/* the kernel version of tolower mungs 'upper ascii' */
+-			master_conntrack->layer7.app_data[length+oldlength] =
++			target[length+offset] =
+ 				isascii(app_data[i])? 
+ 					tolower(app_data[i]) : app_data[i];
+ 			length++;
+ 		}
+ 	}
++	target[length+offset] = '\0';
++	
++	return length;
++}
+ 
+-	master_conntrack->layer7.app_data[length+oldlength] = '\0';
+-	master_conntrack->layer7.app_data_len = length + oldlength;
++/* add the new app data to the conntrack.  Return number of bytes added. */
++static int add_data(struct nf_conn * master_conntrack,
++                    char * app_data, int appdatalen)
++{
++	int length;
+ 
++	length = add_datastr(master_conntrack->layer7.app_data, master_conntrack->layer7.app_data_len, app_data, appdatalen);
++	master_conntrack->layer7.app_data_len += length;
+ 	return length;
+ }
+ 
+@@ -438,7 +440,7 @@ match(const struct sk_buff *skbin,
+ 
+ 	enum ip_conntrack_info master_ctinfo, ctinfo;
+ 	struct nf_conn *master_conntrack, *conntrack;
+-	unsigned char * app_data;
++	unsigned char *app_data, *tmp_data;
+ 	unsigned int pattern_result, appdatalen;
+ 	regexp * comppattern;
+ 
+@@ -466,9 +468,8 @@ match(const struct sk_buff *skbin,
+ 		master_conntrack = master_ct(master_conntrack);
+ 
+ 	/* if we've classified it or seen too many packets */
+-	if(total_acct_packets(master_conntrack) > num_packets ||
+-	   master_conntrack->layer7.app_proto) {
+-
++	if(!info->pkt && (total_acct_packets(master_conntrack) > num_packets ||
++	   master_conntrack->layer7.app_proto)) {
+ 		pattern_result = match_no_append(conntrack, master_conntrack, 
+ 						 ctinfo, master_ctinfo, info);
+ 
+@@ -500,6 +501,25 @@ match(const struct sk_buff *skbin,
+ 	/* the return value gets checked later, when we're ready to use it */
+ 	comppattern = compile_and_cache(info->pattern, info->protocol);
+ 
++	if (info->pkt) {
++		tmp_data = kmalloc(maxdatalen, GFP_ATOMIC);
++		if(!tmp_data){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: out of memory in match, bailing.\n");
++			return info->invert;
++		}
++
++		tmp_data[0] = '\0';
++		add_datastr(tmp_data, 0, app_data, appdatalen);
++		pattern_result = ((comppattern && regexec(comppattern, tmp_data)) ? 1 : 0);
++
++		kfree(tmp_data);
++		tmp_data = NULL;
++		spin_unlock_bh(&l7_lock);
++
++		return (pattern_result ^ info->invert);
++	}
++
+ 	/* On the first packet of a connection, allocate space for app data */
+ 	if(total_acct_packets(master_conntrack) == 1 && !skb->cb[0] && 
+ 	   !master_conntrack->layer7.app_data){
diff --git a/target/linux/generic/patches-2.6.25/120-netfilter-headers-types.patch b/target/linux/generic/patches-2.6.25/120-netfilter-headers-types.patch
new file mode 100644
index 0000000000..32251e37d7
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/120-netfilter-headers-types.patch
@@ -0,0 +1,80 @@
+commit c8942f1f0a7e2160ebf2e51ba89e50ee5895a1e7
+Author: Patrick McHardy <kaber@trash.net>
+Date:   Wed May 21 14:08:38 2008 -0700
+
+    netfilter: Move linux/types.h inclusions outside of #ifdef __KERNEL__
+    
+    Greg Steuck <greg@nest.cx> points out that some of the netfilter
+    headers can't be used in userspace without including linux/types.h
+    first. The headers include their own linux/types.h include statements,
+    these are stripped by make headers-install because they are inside
+    #ifdef __KERNEL__ however. Move them out to fix this.
+    
+    Reported and Tested by Greg Steuck.
+    
+    Signed-off-by: Patrick McHardy <kaber@trash.net>
+    Signed-off-by: David S. Miller <davem@davemloft.net>
+
+--- a/include/linux/netfilter.h
++++ b/include/linux/netfilter.h
+@@ -3,7 +3,6 @@
+ 
+ #ifdef __KERNEL__
+ #include <linux/init.h>
+-#include <linux/types.h>
+ #include <linux/skbuff.h>
+ #include <linux/net.h>
+ #include <linux/if.h>
+@@ -12,6 +11,7 @@
+ #include <linux/wait.h>
+ #include <linux/list.h>
+ #endif
++#include <linux/types.h>
+ #include <linux/compiler.h>
+ 
+ /* Responses from hook functions. */
+--- a/include/linux/netfilter_arp/arp_tables.h
++++ b/include/linux/netfilter_arp/arp_tables.h
+@@ -11,11 +11,11 @@
+ 
+ #ifdef __KERNEL__
+ #include <linux/if.h>
+-#include <linux/types.h>
+ #include <linux/in.h>
+ #include <linux/if_arp.h>
+ #include <linux/skbuff.h>
+ #endif
++#include <linux/types.h>
+ #include <linux/compiler.h>
+ #include <linux/netfilter_arp.h>
+ 
+--- a/include/linux/netfilter_ipv4/ip_tables.h
++++ b/include/linux/netfilter_ipv4/ip_tables.h
+@@ -17,11 +17,11 @@
+ 
+ #ifdef __KERNEL__
+ #include <linux/if.h>
+-#include <linux/types.h>
+ #include <linux/in.h>
+ #include <linux/ip.h>
+ #include <linux/skbuff.h>
+ #endif
++#include <linux/types.h>
+ #include <linux/compiler.h>
+ #include <linux/netfilter_ipv4.h>
+ 
+--- a/include/linux/netfilter_ipv6/ip6_tables.h
++++ b/include/linux/netfilter_ipv6/ip6_tables.h
+@@ -17,11 +17,11 @@
+ 
+ #ifdef __KERNEL__
+ #include <linux/if.h>
+-#include <linux/types.h>
+ #include <linux/in6.h>
+ #include <linux/ipv6.h>
+ #include <linux/skbuff.h>
+ #endif
++#include <linux/types.h>
+ #include <linux/compiler.h>
+ #include <linux/netfilter_ipv6.h>
+ 
diff --git a/target/linux/generic/patches-2.6.25/150-netfilter_imq.patch b/target/linux/generic/patches-2.6.25/150-netfilter_imq.patch
new file mode 100644
index 0000000000..5fcef0a7d4
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/150-netfilter_imq.patch
@@ -0,0 +1,914 @@
+--- /dev/null
++++ b/drivers/net/imq.c
+@@ -0,0 +1,474 @@
++/*
++ *             Pseudo-driver for the intermediate queue device.
++ *
++ *             This program is free software; you can redistribute it and/or
++ *             modify it under the terms of the GNU General Public License
++ *             as published by the Free Software Foundation; either version
++ *             2 of the License, or (at your option) any later version.
++ *
++ * Authors:    Patrick McHardy, <kaber@trash.net>
++ *
++ *            The first version was written by Martin Devera, <devik@cdi.cz>
++ *
++ * Credits:    Jan Rafaj <imq2t@cedric.vabo.cz>
++ *              - Update patch to 2.4.21
++ *             Sebastian Strollo <sstrollo@nortelnetworks.com>
++ *              - Fix "Dead-loop on netdevice imq"-issue
++ *             Marcel Sebek <sebek64@post.cz>
++ *              - Update to 2.6.2-rc1
++ *
++ *	       After some time of inactivity there is a group taking care
++ *	       of IMQ again: http://www.linuximq.net
++ *
++ *
++ *	       2004/06/30 - New version of IMQ patch to kernels <=2.6.7
++ *             including the following changes:
++ *
++ *	       - Correction of ipv6 support "+"s issue (Hasso Tepper)
++ *	       - Correction of imq_init_devs() issue that resulted in
++ *	       kernel OOPS unloading IMQ as module (Norbert Buchmuller)
++ *	       - Addition of functionality to choose number of IMQ devices
++ *	       during kernel config (Andre Correa)
++ *	       - Addition of functionality to choose how IMQ hooks on
++ *	       PRE and POSTROUTING (after or before NAT) (Andre Correa)
++ *	       - Cosmetic corrections (Norbert Buchmuller) (Andre Correa)
++ *
++ *
++ *             2005/12/16 - IMQ versions between 2.6.7 and 2.6.13 were
++ *             released with almost no problems. 2.6.14-x was released
++ *             with some important changes: nfcache was removed; After
++ *             some weeks of trouble we figured out that some IMQ fields
++ *             in skb were missing in skbuff.c - skb_clone and copy_skb_header.
++ *             These functions are correctly patched by this new patch version.
++ *
++ *             Thanks for all who helped to figure out all the problems with
++ *             2.6.14.x: Patrick McHardy, Rune Kock, VeNoMouS, Max CtRiX,
++ *             Kevin Shanahan, Richard Lucassen, Valery Dachev (hopefully
++ *             I didn't forget anybody). I apologize again for my lack of time.
++ *
++ *
++ *             2008/06/17 - 2.6.25 - Changed imq.c to use qdisc_run() instead 
++ *	       of qdisc_restart() and moved qdisc_run() to tasklet to avoid
++ *             recursive locking. New initialization routines to fix 'rmmod' not
++ *             working anymore. Used code from ifb.c. (Jussi Kivilinna)
++ *	       
++ *	       Also, many thanks to pablo Sebastian Greco for making the initial
++ *	       patch and to those who helped the testing.
++ *
++ *             More info at: http://www.linuximq.net/ (Andre Correa)
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/moduleparam.h>
++#include <linux/skbuff.h>
++#include <linux/netdevice.h>
++#include <linux/rtnetlink.h>
++#include <linux/if_arp.h>
++#include <linux/netfilter.h>
++#include <linux/netfilter_ipv4.h>
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++	#include <linux/netfilter_ipv6.h>
++#endif
++#include <linux/imq.h>
++#include <net/pkt_sched.h>
++#include <net/netfilter/nf_queue.h>
++
++struct imq_private {
++	struct tasklet_struct tasklet;
++	unsigned long tasklet_pending;
++};
++
++static nf_hookfn imq_nf_hook;
++
++static struct nf_hook_ops imq_ingress_ipv4 = {
++	.hook		= imq_nf_hook,
++	.owner		= THIS_MODULE,
++	.pf		= PF_INET,
++	.hooknum	= NF_INET_PRE_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++	.priority	= NF_IP_PRI_MANGLE + 1
++#else
++	.priority	= NF_IP_PRI_NAT_DST + 1
++#endif
++};
++
++static struct nf_hook_ops imq_egress_ipv4 = {
++	.hook		= imq_nf_hook,
++	.owner		= THIS_MODULE,
++	.pf		= PF_INET,
++	.hooknum	= NF_INET_POST_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_AA) || defined(CONFIG_IMQ_BEHAVIOR_BA)
++	.priority	= NF_IP_PRI_LAST
++#else
++	.priority	= NF_IP_PRI_NAT_SRC - 1
++#endif
++};
++
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++static struct nf_hook_ops imq_ingress_ipv6 = {
++	.hook		= imq_nf_hook,
++	.owner		= THIS_MODULE,
++	.pf		= PF_INET6,
++	.hooknum	= NF_INET_PRE_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++	.priority	= NF_IP6_PRI_MANGLE + 1
++#else
++	.priority	= NF_IP6_PRI_NAT_DST + 1
++#endif
++};
++
++static struct nf_hook_ops imq_egress_ipv6 = {
++	.hook		= imq_nf_hook,
++	.owner		= THIS_MODULE,
++	.pf		= PF_INET6,
++	.hooknum	= NF_INET_POST_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_AA) || defined(CONFIG_IMQ_BEHAVIOR_BA)
++	.priority	= NF_IP6_PRI_LAST
++#else
++	.priority	= NF_IP6_PRI_NAT_SRC - 1
++#endif
++};
++#endif
++
++#if defined(CONFIG_IMQ_NUM_DEVS)
++static unsigned int numdevs = CONFIG_IMQ_NUM_DEVS;
++#else
++static unsigned int numdevs = IMQ_MAX_DEVS;
++#endif
++
++static struct net_device *imq_devs_cache[IMQ_MAX_DEVS];
++
++static struct net_device_stats *imq_get_stats(struct net_device *dev)
++{
++	return &dev->stats;
++}
++
++/* called for packets kfree'd in qdiscs at places other than enqueue */
++static void imq_skb_destructor(struct sk_buff *skb)
++{
++	struct nf_queue_entry *entry = skb->nf_queue_entry;
++
++	if (entry) {
++		if (entry->indev)
++			dev_put(entry->indev);
++		if (entry->outdev)
++			dev_put(entry->outdev);
++		kfree(entry);
++	}
++}
++
++static int imq_dev_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++	dev->stats.tx_bytes += skb->len;
++	dev->stats.tx_packets++;
++
++	skb->imq_flags = 0;
++	skb->destructor = NULL;
++
++	dev->trans_start = jiffies;
++	nf_reinject(skb->nf_queue_entry, NF_ACCEPT);
++	return 0;
++}
++
++static int imq_nf_queue(struct nf_queue_entry *entry, unsigned queue_num)
++{
++	struct net_device *dev;
++	struct imq_private *priv;
++	struct sk_buff *skb2 = NULL;
++	struct Qdisc *q;
++	unsigned int index = entry->skb->imq_flags & IMQ_F_IFMASK;
++	int ret = -1;
++
++	if (index > numdevs)
++		return -1;
++
++	/* check for imq device by index from cache */
++	dev = imq_devs_cache[index];
++	if (!dev) {
++		char buf[8];
++
++		/* get device by name and cache result */
++		snprintf(buf, sizeof(buf), "imq%d", index);
++		dev = dev_get_by_name(&init_net, buf);
++		if (!dev) {
++			/* not found ?!*/
++			BUG();
++			return -1;
++		}
++
++		imq_devs_cache[index] = dev;
++	}
++
++	priv = netdev_priv(dev);
++	if (!(dev->flags & IFF_UP)) {
++		entry->skb->imq_flags = 0;
++		nf_reinject(entry, NF_ACCEPT);
++		return 0;
++	}
++	dev->last_rx = jiffies;
++
++	if (entry->skb->destructor) {
++		skb2 = entry->skb;
++		entry->skb = skb_clone(entry->skb, GFP_ATOMIC);
++		if (!entry->skb)
++			return -1;
++	}
++	entry->skb->nf_queue_entry = entry;
++
++	dev->stats.rx_bytes += entry->skb->len;
++	dev->stats.rx_packets++;
++
++	spin_lock_bh(&dev->queue_lock);
++	q = dev->qdisc;
++	if (q->enqueue) {
++		q->enqueue(skb_get(entry->skb), q);
++		if (skb_shared(entry->skb)) {
++			entry->skb->destructor = imq_skb_destructor;
++			kfree_skb(entry->skb);
++			ret = 0;
++		}
++	}
++	if (!test_and_set_bit(1, &priv->tasklet_pending))
++		tasklet_schedule(&priv->tasklet);
++	spin_unlock_bh(&dev->queue_lock);
++
++	if (skb2)
++		kfree_skb(ret ? entry->skb : skb2);
++
++	return ret;
++}
++
++static struct nf_queue_handler nfqh = {
++	.name  = "imq",
++	.outfn = imq_nf_queue,
++};
++
++static void qdisc_run_tasklet(unsigned long arg)
++{
++	struct net_device *dev = (struct net_device *)arg;
++	struct imq_private *priv = netdev_priv(dev);
++
++	spin_lock(&dev->queue_lock);
++	qdisc_run(dev);
++	clear_bit(1, &priv->tasklet_pending);
++	spin_unlock(&dev->queue_lock);
++}
++
++static unsigned int imq_nf_hook(unsigned int hook, struct sk_buff *pskb,
++				const struct net_device *indev,
++				const struct net_device *outdev,
++				int (*okfn)(struct sk_buff *))
++{
++	if (pskb->imq_flags & IMQ_F_ENQUEUE)
++		return NF_QUEUE;
++
++	return NF_ACCEPT;
++}
++
++static int imq_close(struct net_device *dev)
++{
++	struct imq_private *priv = netdev_priv(dev);
++
++	tasklet_kill(&priv->tasklet);
++	netif_stop_queue(dev);
++
++	return 0;
++}
++
++static int imq_open(struct net_device *dev)
++{
++	struct imq_private *priv = netdev_priv(dev);
++
++	tasklet_init(&priv->tasklet, qdisc_run_tasklet, (unsigned long)dev);
++	netif_start_queue(dev);
++
++	return 0;
++}
++
++static void imq_setup(struct net_device *dev)
++{
++	dev->hard_start_xmit    = imq_dev_xmit;
++	dev->open		= imq_open;
++	dev->get_stats		= imq_get_stats;
++	dev->stop		= imq_close;
++	dev->type               = ARPHRD_VOID;
++	dev->mtu                = 16000;
++	dev->tx_queue_len       = 11000;
++	dev->flags              = IFF_NOARP;
++}
++
++static struct rtnl_link_ops imq_link_ops __read_mostly = {
++	.kind		= "imq",
++	.priv_size	= sizeof(struct imq_private),
++	.setup		= imq_setup,
++};
++
++static int __init imq_init_hooks(void)
++{
++	int err;
++
++	err = nf_register_queue_handler(PF_INET, &nfqh);
++	if (err)
++		goto err1;
++
++	err = nf_register_hook(&imq_ingress_ipv4);
++	if (err)
++		goto err2;
++
++	err = nf_register_hook(&imq_egress_ipv4);
++	if (err)
++		goto err3;
++
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++	err = nf_register_queue_handler(PF_INET6, &nfqh);
++	if (err)
++		goto err4;
++
++	err = nf_register_hook(&imq_ingress_ipv6);
++	if (err)
++		goto err5;
++
++	err = nf_register_hook(&imq_egress_ipv6);
++	if (err)
++		goto err6;
++#endif
++
++	return 0;
++
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++err6:
++	nf_unregister_hook(&imq_ingress_ipv6);
++err5:
++	nf_unregister_queue_handler(PF_INET6, &nfqh);
++err4:
++	nf_unregister_hook(&imq_egress_ipv4);
++#endif
++err3:
++	nf_unregister_hook(&imq_ingress_ipv4);
++err2:
++	nf_unregister_queue_handler(PF_INET, &nfqh);
++err1:
++	return err;
++}
++
++static int __init imq_init_one(int index)
++{
++	struct net_device *dev;
++	int ret;
++
++	dev = alloc_netdev(sizeof(struct imq_private), "imq%d", imq_setup);
++	if (!dev)
++		return -ENOMEM;
++
++	ret = dev_alloc_name(dev, dev->name);
++	if (ret < 0)
++		goto fail;
++
++	dev->rtnl_link_ops = &imq_link_ops;
++	ret = register_netdevice(dev);
++	if (ret < 0)
++		goto fail;
++
++	return 0;
++fail:
++	free_netdev(dev);
++	return ret;
++}
++
++static int __init imq_init_devs(void)
++{
++	int err, i;
++
++	if (!numdevs || numdevs > IMQ_MAX_DEVS) {
++		printk(KERN_ERR "IMQ: numdevs has to be betweed 1 and %u\n",
++		       IMQ_MAX_DEVS);
++		return -EINVAL;
++	}
++
++	rtnl_lock();
++	err = __rtnl_link_register(&imq_link_ops);
++
++	for (i = 0; i < numdevs && !err; i++)
++		err = imq_init_one(i);
++
++	if (err) {
++		__rtnl_link_unregister(&imq_link_ops);
++		memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
++	}
++	rtnl_unlock();
++
++	return err;
++}
++
++static int __init imq_init_module(void)
++{
++	int err;
++
++	err = imq_init_devs();
++	if (err) {
++		printk(KERN_ERR "IMQ: Error trying imq_init_devs(net)\n");
++		return err;
++	}
++
++	err = imq_init_hooks();
++	if (err) {
++		printk(KERN_ERR "IMQ: Error trying imq_init_hooks()\n");
++		rtnl_link_unregister(&imq_link_ops);
++		memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
++		return err;
++	}
++
++	printk(KERN_INFO "IMQ driver loaded successfully.\n");
++
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++	printk(KERN_INFO "\tHooking IMQ before NAT on PREROUTING.\n");
++#else
++	printk(KERN_INFO "\tHooking IMQ after NAT on PREROUTING.\n");
++#endif
++#if defined(CONFIG_IMQ_BEHAVIOR_AB) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++	printk(KERN_INFO "\tHooking IMQ before NAT on POSTROUTING.\n");
++#else
++	printk(KERN_INFO "\tHooking IMQ after NAT on POSTROUTING.\n");
++#endif
++
++	return 0;
++}
++
++static void __exit imq_unhook(void)
++{
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++	nf_unregister_hook(&imq_ingress_ipv6);
++	nf_unregister_hook(&imq_egress_ipv6);
++	nf_unregister_queue_handler(PF_INET6, &nfqh);
++#endif
++	nf_unregister_hook(&imq_ingress_ipv4);
++	nf_unregister_hook(&imq_egress_ipv4);
++	nf_unregister_queue_handler(PF_INET, &nfqh);
++}
++
++static void __exit imq_cleanup_devs(void)
++{
++	rtnl_link_unregister(&imq_link_ops);
++	memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
++}
++
++static void __exit imq_exit_module(void)
++{
++	imq_unhook();
++	imq_cleanup_devs();
++	printk(KERN_INFO "IMQ driver unloaded successfully.\n");
++}
++
++module_init(imq_init_module);
++module_exit(imq_exit_module);
++
++module_param(numdevs, int, 0);
++MODULE_PARM_DESC(numdevs, "number of IMQ devices (how many imq* devices will "
++			"be created)");
++MODULE_AUTHOR("http://www.linuximq.net");
++MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See "
++			"http://www.linuximq.net/ for more information.");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS_RTNL_LINK("imq");
++
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -117,6 +117,129 @@ config EQUALIZER
+ 	  To compile this driver as a module, choose M here: the module
+ 	  will be called eql.  If unsure, say N.
+ 
++config IMQ
++	tristate "IMQ (intermediate queueing device) support"
++	depends on NETDEVICES && NETFILTER
++	---help---
++	  The IMQ device(s) is used as placeholder for QoS queueing
++	  disciplines. Every packet entering/leaving the IP stack can be
++	  directed through the IMQ device where it's enqueued/dequeued to the
++	  attached qdisc. This allows you to treat network devices as classes
++	  and distribute bandwidth among them. Iptables is used to specify
++	  through which IMQ device, if any, packets travel.
++
++	  More information at: http://www.linuximq.net/
++
++	  To compile this driver as a module, choose M here: the module
++	  will be called imq.  If unsure, say N.
++
++choice
++	prompt "IMQ behavior (PRE/POSTROUTING)"
++	depends on IMQ
++	default IMQ_BEHAVIOR_AB
++	help
++
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		IMQ can work in any of the following ways:
++
++		    PREROUTING   |      POSTROUTING
++		-----------------|-------------------
++		#1  After NAT    |      After NAT
++		#2  After NAT    |      Before NAT
++		#3  Before NAT   |      After NAT
++		#4  Before NAT   |      Before NAT
++
++		The default behavior is to hook before NAT on PREROUTING
++		and after NAT on POSTROUTING (#3).
++
++		This settings are specially usefull when trying to use IMQ
++		to shape NATed clients.
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_AA
++	bool "IMQ AA"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   After NAT
++		POSTROUTING:  After NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_AB
++	bool "IMQ AB"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   After NAT
++		POSTROUTING:  Before NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_BA
++	bool "IMQ BA"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   Before NAT
++		POSTROUTING:  After NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_BB
++	bool "IMQ BB"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   Before NAT
++		POSTROUTING:  Before NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++endchoice
++
++config IMQ_NUM_DEVS
++
++	int "Number of IMQ devices"
++	range 2 16
++	depends on IMQ
++	default "16"
++	help
++
++		This settings defines how many IMQ devices will be
++		created.
++
++		The default value is 16.
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
+ config TUN
+ 	tristate "Universal TUN/TAP device driver support"
+ 	select CRC32
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -143,6 +143,7 @@ obj-$(CONFIG_SLHC) += slhc.o
+ obj-$(CONFIG_XEN_NETDEV_FRONTEND) += xen-netfront.o
+ 
+ obj-$(CONFIG_DUMMY) += dummy.o
++obj-$(CONFIG_IMQ) += imq.o
+ obj-$(CONFIG_IFB) += ifb.o
+ obj-$(CONFIG_MACVLAN) += macvlan.o
+ obj-$(CONFIG_DE600) += de600.o
+--- /dev/null
++++ b/include/linux/imq.h
+@@ -0,0 +1,9 @@
++#ifndef _IMQ_H
++#define _IMQ_H
++
++#define IMQ_MAX_DEVS   16
++
++#define IMQ_F_IFMASK   0x7f
++#define IMQ_F_ENQUEUE  0x80
++
++#endif /* _IMQ_H */
+--- /dev/null
++++ b/include/linux/netfilter_ipv4/ipt_IMQ.h
+@@ -0,0 +1,8 @@
++#ifndef _IPT_IMQ_H
++#define _IPT_IMQ_H
++
++struct ipt_imq_info {
++	unsigned int todev;     /* target imq device */
++};
++
++#endif /* _IPT_IMQ_H */
+--- /dev/null
++++ b/include/linux/netfilter_ipv6/ip6t_IMQ.h
+@@ -0,0 +1,8 @@
++#ifndef _IP6T_IMQ_H
++#define _IP6T_IMQ_H
++
++struct ip6t_imq_info {
++	unsigned int todev;     /* target imq device */
++};
++
++#endif /* _IP6T_IMQ_H */
+--- a/include/linux/skbuff.h
++++ b/include/linux/skbuff.h
+@@ -296,6 +296,10 @@ struct sk_buff {
+ 	struct nf_conntrack	*nfct;
+ 	struct sk_buff		*nfct_reasm;
+ #endif
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	unsigned char			imq_flags;
++	struct nf_queue_entry	*nf_queue_entry;
++#endif
+ #ifdef CONFIG_BRIDGE_NETFILTER
+ 	struct nf_bridge_info	*nf_bridge;
+ #endif
+@@ -1736,6 +1740,10 @@ static inline void __nf_copy(struct sk_b
+ 	dst->nfct_reasm = src->nfct_reasm;
+ 	nf_conntrack_get_reasm(src->nfct_reasm);
+ #endif
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	dst->imq_flags = src->imq_flags;
++	dst->nf_queue_entry = src->nf_queue_entry;
++#endif
+ #ifdef CONFIG_BRIDGE_NETFILTER
+ 	dst->nf_bridge  = src->nf_bridge;
+ 	nf_bridge_get(src->nf_bridge);
+--- a/net/core/dev.c
++++ b/net/core/dev.c
+@@ -95,6 +95,9 @@
+ #include <net/net_namespace.h>
+ #include <net/sock.h>
+ #include <linux/rtnetlink.h>
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++#include <linux/imq.h>
++#endif
+ #include <linux/proc_fs.h>
+ #include <linux/seq_file.h>
+ #include <linux/stat.h>
+@@ -1537,7 +1540,11 @@ static int dev_gso_segment(struct sk_buf
+ int dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
+ {
+ 	if (likely(!skb->next)) {
+-		if (!list_empty(&ptype_all))
++		if (!list_empty(&ptype_all)
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++		    && !(skb->imq_flags & IMQ_F_ENQUEUE)
++#endif
++		    )
+ 			dev_queue_xmit_nit(skb, dev);
+ 
+ 		if (netif_needs_gso(dev, skb)) {
+--- /dev/null
++++ b/net/ipv4/netfilter/ipt_IMQ.c
+@@ -0,0 +1,69 @@
++/*
++ * This target marks packets to be enqueued to an imq device
++ */
++#include <linux/module.h>
++#include <linux/skbuff.h>
++#include <linux/netfilter_ipv4/ip_tables.h>
++#include <linux/netfilter_ipv4/ipt_IMQ.h>
++#include <linux/imq.h>
++
++static unsigned int imq_target(struct sk_buff *pskb,
++			       const struct net_device *in,
++			       const struct net_device *out,
++			       unsigned int hooknum,
++			       const struct xt_target *target,
++			       const void *targinfo)
++{
++	struct ipt_imq_info *mr = (struct ipt_imq_info *)targinfo;
++
++	pskb->imq_flags = mr->todev | IMQ_F_ENQUEUE;
++
++	return XT_CONTINUE;
++}
++
++static bool imq_checkentry(const char *tablename,
++			  const void *e,
++			  const struct xt_target *target,
++			  void *targinfo,
++			  unsigned int hook_mask)
++{
++	struct ipt_imq_info *mr;
++
++	mr = (struct ipt_imq_info *)targinfo;
++
++	if (mr->todev > IMQ_MAX_DEVS) {
++		printk(KERN_WARNING
++		       "IMQ: invalid device specified, highest is %u\n",
++		       IMQ_MAX_DEVS);
++		return 0;
++	}
++
++	return 1;
++}
++
++static struct xt_target ipt_imq_reg = {
++	.name		= "IMQ",
++	.family		= AF_INET,
++	.target		= imq_target,
++	.targetsize	= sizeof(struct ipt_imq_info),
++	.checkentry	= imq_checkentry,
++	.me		= THIS_MODULE,
++	.table		= "mangle"
++};
++
++static int __init init(void)
++{
++	return xt_register_target(&ipt_imq_reg);
++}
++
++static void __exit fini(void)
++{
++	xt_unregister_target(&ipt_imq_reg);
++}
++
++module_init(init);
++module_exit(fini);
++
++MODULE_AUTHOR("http://www.linuximq.net");
++MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See http://www.linuximq.net/ for more information.");
++MODULE_LICENSE("GPL");
+--- a/net/ipv4/netfilter/Kconfig
++++ b/net/ipv4/netfilter/Kconfig
+@@ -123,6 +123,17 @@ config IP_NF_FILTER
+ 
+ 	  To compile it as a module, choose M here.  If unsure, say N.
+ 
++config IP_NF_TARGET_IMQ
++       tristate "IMQ target support"
++       depends on IP_NF_MANGLE && IMQ
++       help
++         This option adds a `IMQ' target which is used to specify if and
++         to which IMQ device packets should get enqueued/dequeued.
++
++	 For more information visit: http://www.linuximq.net/
++
++         To compile it as a module, choose M here.  If unsure, say N.
++
+ config IP_NF_TARGET_REJECT
+ 	tristate "REJECT target support"
+ 	depends on IP_NF_FILTER
+--- a/net/ipv4/netfilter/Makefile
++++ b/net/ipv4/netfilter/Makefile
+@@ -51,6 +51,7 @@ obj-$(CONFIG_IP_NF_MATCH_TTL) += ipt_ttl
+ obj-$(CONFIG_IP_NF_TARGET_CLUSTERIP) += ipt_CLUSTERIP.o
+ obj-$(CONFIG_IP_NF_TARGET_ECN) += ipt_ECN.o
+ obj-$(CONFIG_IP_NF_TARGET_LOG) += ipt_LOG.o
++obj-$(CONFIG_IP_NF_TARGET_IMQ) += ipt_IMQ.o
+ obj-$(CONFIG_IP_NF_TARGET_MASQUERADE) += ipt_MASQUERADE.o
+ obj-$(CONFIG_IP_NF_TARGET_NETMAP) += ipt_NETMAP.o
+ obj-$(CONFIG_IP_NF_TARGET_REDIRECT) += ipt_REDIRECT.o
+--- /dev/null
++++ b/net/ipv6/netfilter/ip6t_IMQ.c
+@@ -0,0 +1,69 @@
++/*
++ * This target marks packets to be enqueued to an imq device
++ */
++#include <linux/module.h>
++#include <linux/skbuff.h>
++#include <linux/netfilter_ipv6/ip6_tables.h>
++#include <linux/netfilter_ipv6/ip6t_IMQ.h>
++#include <linux/imq.h>
++
++static unsigned int imq_target(struct sk_buff *pskb,
++			       const struct net_device *in,
++			       const struct net_device *out,
++			       unsigned int hooknum,
++			       const struct xt_target *target,
++			       const void *targinfo)
++{
++	struct ip6t_imq_info *mr = (struct ip6t_imq_info *)targinfo;
++
++	pskb->imq_flags = mr->todev | IMQ_F_ENQUEUE;
++
++	return XT_CONTINUE;
++}
++
++static bool imq_checkentry(const char *tablename,
++			  const void *entry,
++			  const struct xt_target *target,
++			  void *targinfo,
++			  unsigned int hook_mask)
++{
++	struct ip6t_imq_info *mr;
++
++	mr = (struct ip6t_imq_info *)targinfo;
++
++	if (mr->todev > IMQ_MAX_DEVS) {
++		printk(KERN_WARNING
++		       "IMQ: invalid device specified, highest is %u\n",
++		       IMQ_MAX_DEVS);
++		return 0;
++	}
++
++	return 1;
++}
++
++static struct xt_target ip6t_imq_reg = {
++	.name           = "IMQ",
++	.family		= AF_INET6,
++	.target         = imq_target,
++	.targetsize	= sizeof(struct ip6t_imq_info),
++	.table		= "mangle",
++	.checkentry     = imq_checkentry,
++	.me             = THIS_MODULE
++};
++
++static int __init init(void)
++{
++	return xt_register_target(&ip6t_imq_reg);
++}
++
++static void __exit fini(void)
++{
++	xt_unregister_target(&ip6t_imq_reg);
++}
++
++module_init(init);
++module_exit(fini);
++
++MODULE_AUTHOR("http://www.linuximq.net");
++MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See http://www.linuximq.net/ for more information.");
++MODULE_LICENSE("GPL");
+--- a/net/ipv6/netfilter/Kconfig
++++ b/net/ipv6/netfilter/Kconfig
+@@ -179,6 +179,15 @@ config IP6_NF_MANGLE
+ 
+ 	  To compile it as a module, choose M here.  If unsure, say N.
+ 
++config IP6_NF_TARGET_IMQ
++	tristate "IMQ target support"
++	depends on IP6_NF_MANGLE && IMQ
++	help
++          This option adds a `IMQ' target which is used to specify if and
++          to which imq device packets should get enqueued/dequeued.
++
++          To compile it as a module, choose M here.  If unsure, say N.
++
+ config IP6_NF_TARGET_HL
+ 	tristate  'HL (hoplimit) target support'
+ 	depends on IP6_NF_MANGLE
+--- a/net/ipv6/netfilter/Makefile
++++ b/net/ipv6/netfilter/Makefile
+@@ -6,6 +6,7 @@
+ obj-$(CONFIG_IP6_NF_IPTABLES) += ip6_tables.o
+ obj-$(CONFIG_IP6_NF_FILTER) += ip6table_filter.o
+ obj-$(CONFIG_IP6_NF_MANGLE) += ip6table_mangle.o
++obj-$(CONFIG_IP6_NF_TARGET_IMQ) += ip6t_IMQ.o
+ obj-$(CONFIG_IP6_NF_QUEUE) += ip6_queue.o
+ obj-$(CONFIG_IP6_NF_RAW) += ip6table_raw.o
+ 
+--- a/net/sched/sch_generic.c
++++ b/net/sched/sch_generic.c
+@@ -203,6 +203,7 @@ void __qdisc_run(struct net_device *dev)
+ 
+ 	clear_bit(__LINK_STATE_QDISC_RUNNING, &dev->state);
+ }
++EXPORT_SYMBOL(__qdisc_run);
+ 
+ static void dev_watchdog(unsigned long arg)
+ {
diff --git a/target/linux/generic/patches-2.6.25/180-netfilter_depends.patch b/target/linux/generic/patches-2.6.25/180-netfilter_depends.patch
new file mode 100644
index 0000000000..efab40c2d4
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/180-netfilter_depends.patch
@@ -0,0 +1,20 @@
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -145,7 +145,7 @@ config NF_CONNTRACK_FTP
+ 
+ config NF_CONNTRACK_H323
+ 	tristate "H.323 protocol support"
+-	depends on NF_CONNTRACK && (IPV6 || IPV6=n)
++	depends on NF_CONNTRACK
+ 	depends on NETFILTER_ADVANCED
+ 	help
+ 	  H.323 is a VoIP signalling protocol from ITU-T. As one of the most
+@@ -423,7 +423,7 @@ config NETFILTER_XT_TARGET_CONNSECMARK
+ 
+ config NETFILTER_XT_TARGET_TCPMSS
+ 	tristate '"TCPMSS" target support'
+-	depends on NETFILTER_XTABLES && (IPV6 || IPV6=n)
++	depends on NETFILTER_XTABLES
+ 	default m if NETFILTER_ADVANCED=n
+ 	---help---
+ 	  This option adds a `TCPMSS' target, which allows you to alter the
diff --git a/target/linux/generic/patches-2.6.25/190-netfilter_rtsp.patch b/target/linux/generic/patches-2.6.25/190-netfilter_rtsp.patch
new file mode 100644
index 0000000000..6d16488814
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/190-netfilter_rtsp.patch
@@ -0,0 +1,1362 @@
+--- /dev/null
++++ b/include/linux/netfilter/nf_conntrack_rtsp.h
+@@ -0,0 +1,63 @@
++/*
++ * RTSP extension for IP connection tracking.
++ * (C) 2003 by Tom Marshall <tmarshall at real.com>
++ * based on ip_conntrack_irc.h
++ *
++ *      This program is free software; you can redistribute it and/or
++ *      modify it under the terms of the GNU General Public License
++ *      as published by the Free Software Foundation; either version
++ *      2 of the License, or (at your option) any later version.
++ */
++#ifndef _IP_CONNTRACK_RTSP_H
++#define _IP_CONNTRACK_RTSP_H
++
++//#define IP_NF_RTSP_DEBUG 1
++#define IP_NF_RTSP_VERSION "0.6.21"
++
++#ifdef __KERNEL__
++/* port block types */
++typedef enum {
++    pb_single,  /* client_port=x */
++    pb_range,   /* client_port=x-y */
++    pb_discon   /* client_port=x/y (rtspbis) */
++} portblock_t;
++
++/* We record seq number and length of rtsp headers here, all in host order. */
++
++/*
++ * This structure is per expected connection.  It is a member of struct
++ * ip_conntrack_expect.  The TCP SEQ for the conntrack expect is stored
++ * there and we are expected to only store the length of the data which
++ * needs replaced.  If a packet contains multiple RTSP messages, we create
++ * one expected connection per message.
++ *
++ * We use these variables to mark the entire header block.  This may seem
++ * like overkill, but the nature of RTSP requires it.  A header may appear
++ * multiple times in a message.  We must treat two Transport headers the
++ * same as one Transport header with two entries.
++ */
++struct ip_ct_rtsp_expect
++{
++    u_int32_t   len;        /* length of header block */
++    portblock_t pbtype;     /* Type of port block that was requested */
++    u_int16_t   loport;     /* Port that was requested, low or first */
++    u_int16_t   hiport;     /* Port that was requested, high or second */
++#if 0
++    uint        method;     /* RTSP method */
++    uint        cseq;       /* CSeq from request */
++#endif
++};
++
++extern unsigned int (*nf_nat_rtsp_hook)(struct sk_buff *skb,
++				 enum ip_conntrack_info ctinfo,
++				 unsigned int matchoff, unsigned int matchlen,
++				 struct ip_ct_rtsp_expect *prtspexp,
++				 struct nf_conntrack_expect *exp);
++
++extern void (*nf_nat_rtsp_hook_expectfn)(struct nf_conn *ct, struct nf_conntrack_expect *exp);
++
++#define RTSP_PORT   554
++
++#endif /* __KERNEL__ */
++
++#endif /* _IP_CONNTRACK_RTSP_H */
+--- /dev/null
++++ b/include/linux/netfilter_helpers.h
+@@ -0,0 +1,133 @@
++/*
++ * Helpers for netfiler modules.  This file provides implementations for basic
++ * functions such as strncasecmp(), etc.
++ *
++ * gcc will warn for defined but unused functions, so we only include the
++ * functions requested.  The following macros are used:
++ *   NF_NEED_STRNCASECMP        nf_strncasecmp()
++ *   NF_NEED_STRTOU16           nf_strtou16()
++ *   NF_NEED_STRTOU32           nf_strtou32()
++ */
++#ifndef _NETFILTER_HELPERS_H
++#define _NETFILTER_HELPERS_H
++
++/* Only include these functions for kernel code. */
++#ifdef __KERNEL__
++
++#include <linux/ctype.h>
++#define iseol(c) ( (c) == '\r' || (c) == '\n' )
++
++/*
++ * The standard strncasecmp()
++ */
++#ifdef NF_NEED_STRNCASECMP
++static int
++nf_strncasecmp(const char* s1, const char* s2, u_int32_t len)
++{
++    if (s1 == NULL || s2 == NULL)
++    {
++        if (s1 == NULL && s2 == NULL)
++        {
++            return 0;
++        }
++        return (s1 == NULL) ? -1 : 1;
++    }
++    while (len > 0 && tolower(*s1) == tolower(*s2))
++    {
++        len--;
++        s1++;
++        s2++;
++    }
++    return ( (len == 0) ? 0 : (tolower(*s1) - tolower(*s2)) );
++}
++#endif /* NF_NEED_STRNCASECMP */
++
++/*
++ * Parse a string containing a 16-bit unsigned integer.
++ * Returns the number of chars used, or zero if no number is found.
++ */
++#ifdef NF_NEED_STRTOU16
++static int
++nf_strtou16(const char* pbuf, u_int16_t* pval)
++{
++    int n = 0;
++
++    *pval = 0;
++    while (isdigit(pbuf[n]))
++    {
++        *pval = (*pval * 10) + (pbuf[n] - '0');
++        n++;
++    }
++
++    return n;
++}
++#endif /* NF_NEED_STRTOU16 */
++
++/*
++ * Parse a string containing a 32-bit unsigned integer.
++ * Returns the number of chars used, or zero if no number is found.
++ */
++#ifdef NF_NEED_STRTOU32
++static int
++nf_strtou32(const char* pbuf, u_int32_t* pval)
++{
++    int n = 0;
++
++    *pval = 0;
++    while (pbuf[n] >= '0' && pbuf[n] <= '9')
++    {
++        *pval = (*pval * 10) + (pbuf[n] - '0');
++        n++;
++    }
++
++    return n;
++}
++#endif /* NF_NEED_STRTOU32 */
++
++/*
++ * Given a buffer and length, advance to the next line and mark the current
++ * line.
++ */
++#ifdef NF_NEED_NEXTLINE
++static int
++nf_nextline(char* p, uint len, uint* poff, uint* plineoff, uint* plinelen)
++{
++    uint    off = *poff;
++    uint    physlen = 0;
++
++    if (off >= len)
++    {
++        return 0;
++    }
++
++    while (p[off] != '\n')
++    {
++        if (len-off <= 1)
++        {
++            return 0;
++        }
++
++        physlen++;
++        off++;
++    }
++
++    /* if we saw a crlf, physlen needs adjusted */
++    if (physlen > 0 && p[off] == '\n' && p[off-1] == '\r')
++    {
++        physlen--;
++    }
++
++    /* advance past the newline */
++    off++;
++
++    *plineoff = *poff;
++    *plinelen = physlen;
++    *poff = off;
++
++    return 1;
++}
++#endif /* NF_NEED_NEXTLINE */
++
++#endif /* __KERNEL__ */
++
++#endif /* _NETFILTER_HELPERS_H */
+--- /dev/null
++++ b/include/linux/netfilter_mime.h
+@@ -0,0 +1,89 @@
++/*
++ * MIME functions for netfilter modules.  This file provides implementations
++ * for basic MIME parsing.  MIME headers are used in many protocols, such as
++ * HTTP, RTSP, SIP, etc.
++ *
++ * gcc will warn for defined but unused functions, so we only include the
++ * functions requested.  The following macros are used:
++ *   NF_NEED_MIME_NEXTLINE      nf_mime_nextline()
++ */
++#ifndef _NETFILTER_MIME_H
++#define _NETFILTER_MIME_H
++
++/* Only include these functions for kernel code. */
++#ifdef __KERNEL__
++
++#include <linux/ctype.h>
++
++/*
++ * Given a buffer and length, advance to the next line and mark the current
++ * line.  If the current line is empty, *plinelen will be set to zero.  If
++ * not, it will be set to the actual line length (including CRLF).
++ *
++ * 'line' in this context means logical line (includes LWS continuations).
++ * Returns 1 on success, 0 on failure.
++ */
++#ifdef NF_NEED_MIME_NEXTLINE
++static int
++nf_mime_nextline(char* p, uint len, uint* poff, uint* plineoff, uint* plinelen)
++{
++    uint    off = *poff;
++    uint    physlen = 0;
++    int     is_first_line = 1;
++
++    if (off >= len)
++    {
++        return 0;
++    }
++
++    do
++    {
++        while (p[off] != '\n')
++        {
++            if (len-off <= 1)
++            {
++                return 0;
++            }
++
++            physlen++;
++            off++;
++        }
++
++        /* if we saw a crlf, physlen needs adjusted */
++        if (physlen > 0 && p[off] == '\n' && p[off-1] == '\r')
++        {
++            physlen--;
++        }
++
++        /* advance past the newline */
++        off++;
++
++        /* check for an empty line */
++        if (physlen == 0)
++        {
++            break;
++        }
++
++        /* check for colon on the first physical line */
++        if (is_first_line)
++        {
++            is_first_line = 0;
++            if (memchr(p+(*poff), ':', physlen) == NULL)
++            {
++                return 0;
++            }
++        }
++    }
++    while (p[off] == ' ' || p[off] == '\t');
++
++    *plineoff = *poff;
++    *plinelen = (physlen == 0) ? 0 : (off - *poff);
++    *poff = off;
++
++    return 1;
++}
++#endif /* NF_NEED_MIME_NEXTLINE */
++
++#endif /* __KERNEL__ */
++
++#endif /* _NETFILTER_MIME_H */
+--- a/net/ipv4/netfilter/Makefile
++++ b/net/ipv4/netfilter/Makefile
+@@ -23,6 +23,7 @@ obj-$(CONFIG_NF_NAT_AMANDA) += nf_nat_am
+ obj-$(CONFIG_NF_NAT_FTP) += nf_nat_ftp.o
+ obj-$(CONFIG_NF_NAT_H323) += nf_nat_h323.o
+ obj-$(CONFIG_NF_NAT_IRC) += nf_nat_irc.o
++obj-$(CONFIG_NF_NAT_RTSP) += nf_nat_rtsp.o
+ obj-$(CONFIG_NF_NAT_PPTP) += nf_nat_pptp.o
+ obj-$(CONFIG_NF_NAT_SIP) += nf_nat_sip.o
+ obj-$(CONFIG_NF_NAT_SNMP_BASIC) += nf_nat_snmp_basic.o
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -258,6 +258,16 @@ config NF_CONNTRACK_TFTP
+ 
+ 	  To compile it as a module, choose M here.  If unsure, say N.
+ 
++config NF_CONNTRACK_RTSP
++	tristate "RTSP protocol support"
++	depends on NF_CONNTRACK
++	help
++		Support the RTSP protocol.  This allows UDP transports to be setup
++		properly, including RTP and RDT.
++
++		If you want to compile it as a module, say 'M' here and read
++		Documentation/modules.txt.  If unsure, say 'Y'.
++
+ config NF_CT_NETLINK
+ 	tristate 'Connection tracking netlink interface'
+ 	depends on NF_CONNTRACK
+--- a/net/netfilter/Makefile
++++ b/net/netfilter/Makefile
+@@ -32,6 +32,7 @@ obj-$(CONFIG_NF_CONNTRACK_PPTP) += nf_co
+ obj-$(CONFIG_NF_CONNTRACK_SANE) += nf_conntrack_sane.o
+ obj-$(CONFIG_NF_CONNTRACK_SIP) += nf_conntrack_sip.o
+ obj-$(CONFIG_NF_CONNTRACK_TFTP) += nf_conntrack_tftp.o
++obj-$(CONFIG_NF_CONNTRACK_RTSP) += nf_conntrack_rtsp.o
+ 
+ # generic X tables 
+ obj-$(CONFIG_NETFILTER_XTABLES) += x_tables.o xt_tcpudp.o
+--- a/net/ipv4/netfilter/Kconfig
++++ b/net/ipv4/netfilter/Kconfig
+@@ -266,6 +266,11 @@ config NF_NAT_IRC
+ 	depends on IP_NF_IPTABLES && NF_CONNTRACK && NF_NAT
+ 	default NF_NAT && NF_CONNTRACK_IRC
+ 
++config NF_NAT_RTSP
++	tristate
++ 	depends on IP_NF_IPTABLES && NF_CONNTRACK && NF_NAT
++ 	default NF_NAT && NF_CONNTRACK_RTSP
++
+ config NF_NAT_TFTP
+ 	tristate
+ 	depends on IP_NF_IPTABLES && NF_CONNTRACK && NF_NAT
+--- /dev/null
++++ b/net/netfilter/nf_conntrack_rtsp.c
+@@ -0,0 +1,513 @@
++/*
++ * RTSP extension for IP connection tracking
++ * (C) 2003 by Tom Marshall <tmarshall at real.com>
++ * based on ip_conntrack_irc.c
++ *
++ *      This program is free software; you can redistribute it and/or
++ *      modify it under the terms of the GNU General Public License
++ *      as published by the Free Software Foundation; either version
++ *      2 of the License, or (at your option) any later version.
++ *
++ * Module load syntax:
++ *   insmod nf_conntrack_rtsp.o ports=port1,port2,...port<MAX_PORTS>
++ *                              max_outstanding=n setup_timeout=secs
++ *
++ * If no ports are specified, the default will be port 554.
++ *
++ * With max_outstanding you can define the maximum number of not yet
++ * answered SETUP requests per RTSP session (default 8).
++ * With setup_timeout you can specify how long the system waits for
++ * an expected data channel (default 300 seconds).
++ *
++ * 2005-02-13: Harald Welte <laforge at netfilter.org>
++ * 	- port to 2.6
++ * 	- update to recent post-2.6.11 api changes
++ * 2006-09-14: Steven Van Acker <deepstar at singularity.be>
++ *      - removed calls to NAT code from conntrack helper: NAT no longer needed to use rtsp-conntrack
++ * 2007-04-18: Michael Guntsche <mike at it-loops.com>
++ * 			- Port to new NF API
++ */
++
++#include <linux/module.h>
++#include <linux/netfilter.h>
++#include <linux/ip.h>
++#include <linux/inet.h>
++#include <net/tcp.h>
++
++#include <net/netfilter/nf_conntrack.h>
++#include <net/netfilter/nf_conntrack_expect.h>
++#include <net/netfilter/nf_conntrack_helper.h>
++#include <linux/netfilter/nf_conntrack_rtsp.h>
++
++#define NF_NEED_STRNCASECMP
++#define NF_NEED_STRTOU16
++#define NF_NEED_STRTOU32
++#define NF_NEED_NEXTLINE
++#include <linux/netfilter_helpers.h>
++#define NF_NEED_MIME_NEXTLINE
++#include <linux/netfilter_mime.h>
++
++#include <linux/ctype.h>
++#define MAX_SIMUL_SETUP 8 /* XXX: use max_outstanding */
++#define INFOP(fmt, args...) printk(KERN_INFO "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
++#if 0
++#define DEBUGP(fmt, args...) printk(KERN_DEBUG "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
++#else
++#define DEBUGP(fmt, args...)
++#endif
++
++#define MAX_PORTS 8
++static int ports[MAX_PORTS];
++static int num_ports = 0;
++static int max_outstanding = 8;
++static unsigned int setup_timeout = 300;
++
++MODULE_AUTHOR("Tom Marshall <tmarshall at real.com>");
++MODULE_DESCRIPTION("RTSP connection tracking module");
++MODULE_LICENSE("GPL");
++module_param_array(ports, int, &num_ports, 0400);
++MODULE_PARM_DESC(ports, "port numbers of RTSP servers");
++module_param(max_outstanding, int, 0400);
++MODULE_PARM_DESC(max_outstanding, "max number of outstanding SETUP requests per RTSP session");
++module_param(setup_timeout, int, 0400);
++MODULE_PARM_DESC(setup_timeout, "timeout on for unestablished data channels");
++
++static char *rtsp_buffer;
++static DEFINE_SPINLOCK(rtsp_buffer_lock);
++
++unsigned int (*nf_nat_rtsp_hook)(struct sk_buff *skb,
++				 enum ip_conntrack_info ctinfo,
++				 unsigned int matchoff, unsigned int matchlen,struct ip_ct_rtsp_expect* prtspexp,
++				 struct nf_conntrack_expect *exp);
++void (*nf_nat_rtsp_hook_expectfn)(struct nf_conn *ct, struct nf_conntrack_expect *exp);
++
++EXPORT_SYMBOL_GPL(nf_nat_rtsp_hook);
++
++/*
++ * Max mappings we will allow for one RTSP connection (for RTP, the number
++ * of allocated ports is twice this value).  Note that SMIL burns a lot of
++ * ports so keep this reasonably high.  If this is too low, you will see a
++ * lot of "no free client map entries" messages.
++ */
++#define MAX_PORT_MAPS 16
++
++/*** default port list was here in the masq code: 554, 3030, 4040 ***/
++
++#define SKIP_WSPACE(ptr,len,off) while(off < len && isspace(*(ptr+off))) { off++; }
++
++/*
++ * Parse an RTSP packet.
++ *
++ * Returns zero if parsing failed.
++ *
++ * Parameters:
++ *  IN      ptcp        tcp data pointer
++ *  IN      tcplen      tcp data len
++ *  IN/OUT  ptcpoff     points to current tcp offset
++ *  OUT     phdrsoff    set to offset of rtsp headers
++ *  OUT     phdrslen    set to length of rtsp headers
++ *  OUT     pcseqoff    set to offset of CSeq header
++ *  OUT     pcseqlen    set to length of CSeq header
++ */
++static int
++rtsp_parse_message(char* ptcp, uint tcplen, uint* ptcpoff,
++                   uint* phdrsoff, uint* phdrslen,
++                   uint* pcseqoff, uint* pcseqlen,
++                   uint* transoff, uint* translen)
++{
++	uint    entitylen = 0;
++	uint    lineoff;
++	uint    linelen;
++
++	if (!nf_nextline(ptcp, tcplen, ptcpoff, &lineoff, &linelen))
++		return 0;
++
++	*phdrsoff = *ptcpoff;
++	while (nf_mime_nextline(ptcp, tcplen, ptcpoff, &lineoff, &linelen)) {
++		if (linelen == 0) {
++			if (entitylen > 0)
++				*ptcpoff += min(entitylen, tcplen - *ptcpoff);
++			break;
++		}
++		if (lineoff+linelen > tcplen) {
++			INFOP("!! overrun !!\n");
++			break;
++		}
++
++		if (nf_strncasecmp(ptcp+lineoff, "CSeq:", 5) == 0) {
++			*pcseqoff = lineoff;
++			*pcseqlen = linelen;
++		}
++
++		if (nf_strncasecmp(ptcp+lineoff, "Transport:", 10) == 0) {
++			*transoff = lineoff;
++			*translen = linelen;
++		}
++
++		if (nf_strncasecmp(ptcp+lineoff, "Content-Length:", 15) == 0) {
++			uint off = lineoff+15;
++			SKIP_WSPACE(ptcp+lineoff, linelen, off);
++			nf_strtou32(ptcp+off, &entitylen);
++		}
++	}
++	*phdrslen = (*ptcpoff) - (*phdrsoff);
++
++	return 1;
++}
++
++/*
++ * Find lo/hi client ports (if any) in transport header
++ * In:
++ *   ptcp, tcplen = packet
++ *   tranoff, tranlen = buffer to search
++ *
++ * Out:
++ *   pport_lo, pport_hi = lo/hi ports (host endian)
++ *
++ * Returns nonzero if any client ports found
++ *
++ * Note: it is valid (and expected) for the client to request multiple
++ * transports, so we need to parse the entire line.
++ */
++static int
++rtsp_parse_transport(char* ptran, uint tranlen,
++                     struct ip_ct_rtsp_expect* prtspexp)
++{
++	int     rc = 0;
++	uint    off = 0;
++
++	if (tranlen < 10 || !iseol(ptran[tranlen-1]) ||
++	    nf_strncasecmp(ptran, "Transport:", 10) != 0) {
++		INFOP("sanity check failed\n");
++		return 0;
++	}
++
++	DEBUGP("tran='%.*s'\n", (int)tranlen, ptran);
++	off += 10;
++	SKIP_WSPACE(ptran, tranlen, off);
++
++	/* Transport: tran;field;field=val,tran;field;field=val,... */
++	while (off < tranlen) {
++		const char* pparamend;
++		uint        nextparamoff;
++
++		pparamend = memchr(ptran+off, ',', tranlen-off);
++		pparamend = (pparamend == NULL) ? ptran+tranlen : pparamend+1;
++		nextparamoff = pparamend-ptran;
++
++		while (off < nextparamoff) {
++			const char* pfieldend;
++			uint        nextfieldoff;
++
++			pfieldend = memchr(ptran+off, ';', nextparamoff-off);
++			nextfieldoff = (pfieldend == NULL) ? nextparamoff : pfieldend-ptran+1;
++
++			if (strncmp(ptran+off, "client_port=", 12) == 0) {
++				u_int16_t   port;
++				uint        numlen;
++
++				off += 12;
++				numlen = nf_strtou16(ptran+off, &port);
++				off += numlen;
++				if (prtspexp->loport != 0 && prtspexp->loport != port)
++					DEBUGP("multiple ports found, port %hu ignored\n", port);
++				else {
++					DEBUGP("lo port found : %hu\n", port);
++					prtspexp->loport = prtspexp->hiport = port;
++					if (ptran[off] == '-') {
++						off++;
++						numlen = nf_strtou16(ptran+off, &port);
++						off += numlen;
++						prtspexp->pbtype = pb_range;
++						prtspexp->hiport = port;
++
++						// If we have a range, assume rtp:
++						// loport must be even, hiport must be loport+1
++						if ((prtspexp->loport & 0x0001) != 0 ||
++						    prtspexp->hiport != prtspexp->loport+1) {
++							DEBUGP("incorrect range: %hu-%hu, correcting\n",
++							       prtspexp->loport, prtspexp->hiport);
++							prtspexp->loport &= 0xfffe;
++							prtspexp->hiport = prtspexp->loport+1;
++						}
++					} else if (ptran[off] == '/') {
++						off++;
++						numlen = nf_strtou16(ptran+off, &port);
++						off += numlen;
++						prtspexp->pbtype = pb_discon;
++						prtspexp->hiport = port;
++					}
++					rc = 1;
++				}
++			}
++
++			/*
++			 * Note we don't look for the destination parameter here.
++			 * If we are using NAT, the NAT module will handle it.  If not,
++			 * and the client is sending packets elsewhere, the expectation
++			 * will quietly time out.
++			 */
++
++			off = nextfieldoff;
++		}
++
++		off = nextparamoff;
++	}
++
++	return rc;
++}
++
++void expected(struct nf_conn *ct, struct nf_conntrack_expect *exp)
++{
++    if(nf_nat_rtsp_hook_expectfn) {
++        nf_nat_rtsp_hook_expectfn(ct,exp);
++    }
++}
++
++/*** conntrack functions ***/
++
++/* outbound packet: client->server */
++
++static inline int
++help_out(struct sk_buff *skb, unsigned char *rb_ptr, unsigned int datalen,
++                struct nf_conn *ct, enum ip_conntrack_info ctinfo)
++{
++	struct ip_ct_rtsp_expect expinfo;
++
++	int dir = CTINFO2DIR(ctinfo);   /* = IP_CT_DIR_ORIGINAL */
++	//struct  tcphdr* tcph = (void*)iph + iph->ihl * 4;
++	//uint    tcplen = pktlen - iph->ihl * 4;
++	char*   pdata = rb_ptr;
++	//uint    datalen = tcplen - tcph->doff * 4;
++	uint    dataoff = 0;
++	int ret = NF_ACCEPT;
++
++	struct nf_conntrack_expect *exp;
++
++	__be16 be_loport;
++
++	memset(&expinfo, 0, sizeof(expinfo));
++
++	while (dataoff < datalen) {
++		uint    cmdoff = dataoff;
++		uint    hdrsoff = 0;
++		uint    hdrslen = 0;
++		uint    cseqoff = 0;
++		uint    cseqlen = 0;
++		uint    transoff = 0;
++		uint    translen = 0;
++		uint    off;
++
++		if (!rtsp_parse_message(pdata, datalen, &dataoff,
++					&hdrsoff, &hdrslen,
++					&cseqoff, &cseqlen,
++					&transoff, &translen))
++			break;      /* not a valid message */
++
++		if (strncmp(pdata+cmdoff, "SETUP ", 6) != 0)
++			continue;   /* not a SETUP message */
++		DEBUGP("found a setup message\n");
++
++		off = 0;
++		if(translen) {
++			rtsp_parse_transport(pdata+transoff, translen, &expinfo);
++		}
++
++		if (expinfo.loport == 0) {
++			DEBUGP("no udp transports found\n");
++			continue;   /* no udp transports found */
++		}
++
++		DEBUGP("udp transport found, ports=(%d,%hu,%hu)\n",
++		       (int)expinfo.pbtype, expinfo.loport, expinfo.hiport);
++
++		exp = nf_ct_expect_alloc(ct);
++		if (!exp) {
++			ret = NF_DROP;
++			goto out;
++		}
++
++		be_loport = htons(expinfo.loport);
++
++		nf_ct_expect_init(exp, ct->tuplehash[!dir].tuple.src.l3num,
++			&ct->tuplehash[!dir].tuple.src.u3, &ct->tuplehash[!dir].tuple.dst.u3,
++			IPPROTO_UDP, NULL, &be_loport);
++
++		exp->master = ct;
++
++		exp->expectfn = expected;
++		exp->flags = 0;
++
++		if (expinfo.pbtype == pb_range) {
++			DEBUGP("Changing expectation mask to handle multiple ports\n");
++			exp->mask.src.u.udp.port  = 0xfffe;
++		}
++
++		DEBUGP("expect_related %u.%u.%u.%u:%u-%u.%u.%u.%u:%u\n",
++		       NIPQUAD(exp->tuple.src.u3.ip),
++		       ntohs(exp->tuple.src.u.udp.port),
++		       NIPQUAD(exp->tuple.dst.u3.ip),
++		       ntohs(exp->tuple.dst.u.udp.port));
++
++		if (nf_nat_rtsp_hook)
++			/* pass the request off to the nat helper */
++			ret = nf_nat_rtsp_hook(skb, ctinfo, hdrsoff, hdrslen, &expinfo, exp);
++		else if (nf_ct_expect_related(exp) != 0) {
++			INFOP("nf_ct_expect_related failed\n");
++			ret  = NF_DROP;
++		}
++		nf_ct_expect_put(exp);
++		goto out;
++	}
++out:
++
++	return ret;
++}
++
++
++static inline int
++help_in(struct sk_buff *skb, size_t pktlen,
++ struct nf_conn* ct, enum ip_conntrack_info ctinfo)
++{
++ return NF_ACCEPT;
++}
++
++static int help(struct sk_buff *skb, unsigned int protoff,
++		struct nf_conn *ct, enum ip_conntrack_info ctinfo)
++{
++	struct tcphdr _tcph, *th;
++	unsigned int dataoff, datalen;
++	char *rb_ptr;
++	int ret = NF_DROP;
++
++	/* Until there's been traffic both ways, don't look in packets. */
++	if (ctinfo != IP_CT_ESTABLISHED &&
++	    ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY) {
++		DEBUGP("conntrackinfo = %u\n", ctinfo);
++		return NF_ACCEPT;
++	}
++
++	/* Not whole TCP header? */
++	th = skb_header_pointer(skb, protoff, sizeof(_tcph), &_tcph);
++
++	if (!th)
++		return NF_ACCEPT;
++
++	/* No data ? */
++	dataoff = protoff + th->doff*4;
++	datalen = skb->len - dataoff;
++	if (dataoff >= skb->len)
++		return NF_ACCEPT;
++
++	spin_lock_bh(&rtsp_buffer_lock);
++	rb_ptr = skb_header_pointer(skb, dataoff,
++				    skb->len - dataoff, rtsp_buffer);
++	BUG_ON(rb_ptr == NULL);
++
++#if 0
++	/* Checksum invalid?  Ignore. */
++	/* FIXME: Source route IP option packets --RR */
++	if (tcp_v4_check(tcph, tcplen, iph->saddr, iph->daddr,
++			 csum_partial((char*)tcph, tcplen, 0)))
++	{
++		DEBUGP("bad csum: %p %u %u.%u.%u.%u %u.%u.%u.%u\n",
++		       tcph, tcplen, NIPQUAD(iph->saddr), NIPQUAD(iph->daddr));
++		return NF_ACCEPT;
++	}
++#endif
++
++	switch (CTINFO2DIR(ctinfo)) {
++	case IP_CT_DIR_ORIGINAL:
++		ret = help_out(skb, rb_ptr, datalen, ct, ctinfo);
++		break;
++	case IP_CT_DIR_REPLY:
++		DEBUGP("IP_CT_DIR_REPLY\n");
++		/* inbound packet: server->client */
++		ret = NF_ACCEPT;
++		break;
++	}
++
++	spin_unlock_bh(&rtsp_buffer_lock);
++
++	return ret;
++}
++
++static struct nf_conntrack_helper rtsp_helpers[MAX_PORTS];
++static char rtsp_names[MAX_PORTS][10];
++
++/* This function is intentionally _NOT_ defined as __exit */
++static void
++fini(void)
++{
++	int i;
++	for (i = 0; i < num_ports; i++) {
++		DEBUGP("unregistering port %d\n", ports[i]);
++		nf_conntrack_helper_unregister(&rtsp_helpers[i]);
++	}
++	kfree(rtsp_buffer);
++}
++
++static int __init
++init(void)
++{
++	int i, ret;
++	struct nf_conntrack_helper *hlpr;
++	char *tmpname;
++
++	printk("nf_conntrack_rtsp v" IP_NF_RTSP_VERSION " loading\n");
++
++	if (max_outstanding < 1) {
++		printk("nf_conntrack_rtsp: max_outstanding must be a positive integer\n");
++		return -EBUSY;
++	}
++	if (setup_timeout < 0) {
++		printk("nf_conntrack_rtsp: setup_timeout must be a positive integer\n");
++		return -EBUSY;
++	}
++
++	rtsp_buffer = kmalloc(65536, GFP_KERNEL);
++	if (!rtsp_buffer)
++		return -ENOMEM;
++
++	/* If no port given, default to standard rtsp port */
++	if (ports[0] == 0) {
++		ports[0] = RTSP_PORT;
++	}
++
++	for (i = 0; (i < MAX_PORTS) && ports[i]; i++) {
++		hlpr = &rtsp_helpers[i];
++		memset(hlpr, 0, sizeof(struct nf_conntrack_helper));
++		hlpr->tuple.src.u.tcp.port = htons(ports[i]);
++		hlpr->tuple.dst.protonum = IPPROTO_TCP;
++		hlpr->max_expected = max_outstanding;
++		hlpr->timeout = setup_timeout;
++		hlpr->me = THIS_MODULE;
++		hlpr->help = help;
++
++		tmpname = &rtsp_names[i][0];
++		if (ports[i] == RTSP_PORT) {
++			sprintf(tmpname, "rtsp");
++		} else {
++			sprintf(tmpname, "rtsp-%d", i);
++		}
++		hlpr->name = tmpname;
++
++		DEBUGP("port #%d: %d\n", i, ports[i]);
++
++		ret = nf_conntrack_helper_register(hlpr);
++
++		if (ret) {
++			printk("nf_conntrack_rtsp: ERROR registering port %d\n", ports[i]);
++			fini();
++			return -EBUSY;
++		}
++		num_ports++;
++	}
++	return 0;
++}
++
++module_init(init);
++module_exit(fini);
++
++EXPORT_SYMBOL(nf_nat_rtsp_hook_expectfn);
++
+--- /dev/null
++++ b/net/ipv4/netfilter/nf_nat_rtsp.c
+@@ -0,0 +1,496 @@
++/*
++ * RTSP extension for TCP NAT alteration
++ * (C) 2003 by Tom Marshall <tmarshall at real.com>
++ * based on ip_nat_irc.c
++ *
++ *      This program is free software; you can redistribute it and/or
++ *      modify it under the terms of the GNU General Public License
++ *      as published by the Free Software Foundation; either version
++ *      2 of the License, or (at your option) any later version.
++ *
++ * Module load syntax:
++ *      insmod nf_nat_rtsp.o ports=port1,port2,...port<MAX_PORTS>
++ *                           stunaddr=<address>
++ *                           destaction=[auto|strip|none]
++ *
++ * If no ports are specified, the default will be port 554 only.
++ *
++ * stunaddr specifies the address used to detect that a client is using STUN.
++ * If this address is seen in the destination parameter, it is assumed that
++ * the client has already punched a UDP hole in the firewall, so we don't
++ * mangle the client_port.  If none is specified, it is autodetected.  It
++ * only needs to be set if you have multiple levels of NAT.  It should be
++ * set to the external address that the STUN clients detect.  Note that in
++ * this case, it will not be possible for clients to use UDP with servers
++ * between the NATs.
++ *
++ * If no destaction is specified, auto is used.
++ *   destaction=auto:  strip destination parameter if it is not stunaddr.
++ *   destaction=strip: always strip destination parameter (not recommended).
++ *   destaction=none:  do not touch destination parameter (not recommended).
++ */
++
++#include <linux/module.h>
++#include <net/tcp.h>
++#include <net/netfilter/nf_nat_helper.h>
++#include <net/netfilter/nf_nat_rule.h>
++#include <linux/netfilter/nf_conntrack_rtsp.h>
++#include <net/netfilter/nf_conntrack_expect.h>
++
++#include <linux/inet.h>
++#include <linux/ctype.h>
++#define NF_NEED_STRNCASECMP
++#define NF_NEED_STRTOU16
++#include <linux/netfilter_helpers.h>
++#define NF_NEED_MIME_NEXTLINE
++#include <linux/netfilter_mime.h>
++
++#define INFOP(fmt, args...) printk(KERN_INFO "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
++#if 0
++#define DEBUGP(fmt, args...) printk(KERN_DEBUG "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
++#else
++#define DEBUGP(fmt, args...)
++#endif
++
++#define MAX_PORTS       8
++#define DSTACT_AUTO     0
++#define DSTACT_STRIP    1
++#define DSTACT_NONE     2
++
++static char*    stunaddr = NULL;
++static char*    destaction = NULL;
++
++static u_int32_t extip = 0;
++static int       dstact = 0;
++
++MODULE_AUTHOR("Tom Marshall <tmarshall at real.com>");
++MODULE_DESCRIPTION("RTSP network address translation module");
++MODULE_LICENSE("GPL");
++module_param(stunaddr, charp, 0644);
++MODULE_PARM_DESC(stunaddr, "Address for detecting STUN");
++module_param(destaction, charp, 0644);
++MODULE_PARM_DESC(destaction, "Action for destination parameter (auto/strip/none)");
++
++#define SKIP_WSPACE(ptr,len,off) while(off < len && isspace(*(ptr+off))) { off++; }
++
++/*** helper functions ***/
++
++static void
++get_skb_tcpdata(struct sk_buff* skb, char** pptcpdata, uint* ptcpdatalen)
++{
++    struct iphdr*   iph  = ip_hdr(skb);
++    struct tcphdr*  tcph = (void *)iph + ip_hdrlen(skb);
++
++    *pptcpdata = (char*)tcph +  tcph->doff*4;
++    *ptcpdatalen = ((char*)skb_transport_header(skb) + skb->len) - *pptcpdata;
++}
++
++/*** nat functions ***/
++
++/*
++ * Mangle the "Transport:" header:
++ *   - Replace all occurences of "client_port=<spec>"
++ *   - Handle destination parameter
++ *
++ * In:
++ *   ct, ctinfo = conntrack context
++ *   skb        = packet
++ *   tranoff    = Transport header offset from TCP data
++ *   tranlen    = Transport header length (incl. CRLF)
++ *   rport_lo   = replacement low  port (host endian)
++ *   rport_hi   = replacement high port (host endian)
++ *
++ * Returns packet size difference.
++ *
++ * Assumes that a complete transport header is present, ending with CR or LF
++ */
++static int
++rtsp_mangle_tran(enum ip_conntrack_info ctinfo,
++                 struct nf_conntrack_expect* exp,
++								 struct ip_ct_rtsp_expect* prtspexp,
++                 struct sk_buff* skb, uint tranoff, uint tranlen)
++{
++    char*       ptcp;
++    uint        tcplen;
++    char*       ptran;
++    char        rbuf1[16];      /* Replacement buffer (one port) */
++    uint        rbuf1len;       /* Replacement len (one port) */
++    char        rbufa[16];      /* Replacement buffer (all ports) */
++    uint        rbufalen;       /* Replacement len (all ports) */
++    u_int32_t   newip;
++    u_int16_t   loport, hiport;
++    uint        off = 0;
++    uint        diff;           /* Number of bytes we removed */
++
++    struct nf_conn *ct = exp->master;
++    struct nf_conntrack_tuple *t;
++
++    char    szextaddr[15+1];
++    uint    extaddrlen;
++    int     is_stun;
++
++    get_skb_tcpdata(skb, &ptcp, &tcplen);
++    ptran = ptcp+tranoff;
++
++    if (tranoff+tranlen > tcplen || tcplen-tranoff < tranlen ||
++        tranlen < 10 || !iseol(ptran[tranlen-1]) ||
++        nf_strncasecmp(ptran, "Transport:", 10) != 0)
++    {
++        INFOP("sanity check failed\n");
++        return 0;
++    }
++    off += 10;
++    SKIP_WSPACE(ptcp+tranoff, tranlen, off);
++
++    newip = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip;
++    t = &exp->tuple;
++    t->dst.u3.ip = newip;
++
++    extaddrlen = extip ? sprintf(szextaddr, "%u.%u.%u.%u", NIPQUAD(extip))
++                       : sprintf(szextaddr, "%u.%u.%u.%u", NIPQUAD(newip));
++    DEBUGP("stunaddr=%s (%s)\n", szextaddr, (extip?"forced":"auto"));
++
++    rbuf1len = rbufalen = 0;
++    switch (prtspexp->pbtype)
++    {
++    case pb_single:
++        for (loport = prtspexp->loport; loport != 0; loport++) /* XXX: improper wrap? */
++        {
++            t->dst.u.udp.port = htons(loport);
++            if (nf_ct_expect_related(exp) == 0)
++            {
++                DEBUGP("using port %hu\n", loport);
++                break;
++            }
++        }
++        if (loport != 0)
++        {
++            rbuf1len = sprintf(rbuf1, "%hu", loport);
++            rbufalen = sprintf(rbufa, "%hu", loport);
++        }
++        break;
++    case pb_range:
++        for (loport = prtspexp->loport; loport != 0; loport += 2) /* XXX: improper wrap? */
++        {
++            t->dst.u.udp.port = htons(loport);
++            if (nf_ct_expect_related(exp) == 0)
++            {
++                hiport = loport + ~exp->mask.src.u.udp.port;
++                DEBUGP("using ports %hu-%hu\n", loport, hiport);
++                break;
++            }
++        }
++        if (loport != 0)
++        {
++            rbuf1len = sprintf(rbuf1, "%hu", loport);
++            rbufalen = sprintf(rbufa, "%hu-%hu", loport, loport+1);
++        }
++        break;
++    case pb_discon:
++        for (loport = prtspexp->loport; loport != 0; loport++) /* XXX: improper wrap? */
++        {
++            t->dst.u.udp.port = htons(loport);
++            if (nf_ct_expect_related(exp) == 0)
++            {
++                DEBUGP("using port %hu (1 of 2)\n", loport);
++                break;
++            }
++        }
++        for (hiport = prtspexp->hiport; hiport != 0; hiport++) /* XXX: improper wrap? */
++        {
++            t->dst.u.udp.port = htons(hiport);
++            if (nf_ct_expect_related(exp) == 0)
++            {
++                DEBUGP("using port %hu (2 of 2)\n", hiport);
++                break;
++            }
++        }
++        if (loport != 0 && hiport != 0)
++        {
++            rbuf1len = sprintf(rbuf1, "%hu", loport);
++            if (hiport == loport+1)
++            {
++                rbufalen = sprintf(rbufa, "%hu-%hu", loport, hiport);
++            }
++            else
++            {
++                rbufalen = sprintf(rbufa, "%hu/%hu", loport, hiport);
++            }
++        }
++        break;
++    }
++
++    if (rbuf1len == 0)
++    {
++        return 0;   /* cannot get replacement port(s) */
++    }
++
++    /* Transport: tran;field;field=val,tran;field;field=val,... */
++    while (off < tranlen)
++    {
++        uint        saveoff;
++        const char* pparamend;
++        uint        nextparamoff;
++
++        pparamend = memchr(ptran+off, ',', tranlen-off);
++        pparamend = (pparamend == NULL) ? ptran+tranlen : pparamend+1;
++        nextparamoff = pparamend-ptcp;
++
++        /*
++         * We pass over each param twice.  On the first pass, we look for a
++         * destination= field.  It is handled by the security policy.  If it
++         * is present, allowed, and equal to our external address, we assume
++         * that STUN is being used and we leave the client_port= field alone.
++         */
++        is_stun = 0;
++        saveoff = off;
++        while (off < nextparamoff)
++        {
++            const char* pfieldend;
++            uint        nextfieldoff;
++
++            pfieldend = memchr(ptran+off, ';', nextparamoff-off);
++            nextfieldoff = (pfieldend == NULL) ? nextparamoff : pfieldend-ptran+1;
++
++            if (dstact != DSTACT_NONE && strncmp(ptran+off, "destination=", 12) == 0)
++            {
++                if (strncmp(ptran+off+12, szextaddr, extaddrlen) == 0)
++                {
++                    is_stun = 1;
++                }
++                if (dstact == DSTACT_STRIP || (dstact == DSTACT_AUTO && !is_stun))
++                {
++                    diff = nextfieldoff-off;
++                    if (!nf_nat_mangle_tcp_packet(skb, ct, ctinfo,
++                                                         off, diff, NULL, 0))
++                    {
++                        /* mangle failed, all we can do is bail */
++			nf_ct_unexpect_related(exp);
++                        return 0;
++                    }
++                    get_skb_tcpdata(skb, &ptcp, &tcplen);
++                    ptran = ptcp+tranoff;
++                    tranlen -= diff;
++                    nextparamoff -= diff;
++                    nextfieldoff -= diff;
++                }
++            }
++
++            off = nextfieldoff;
++        }
++        if (is_stun)
++        {
++            continue;
++        }
++        off = saveoff;
++        while (off < nextparamoff)
++        {
++            const char* pfieldend;
++            uint        nextfieldoff;
++
++            pfieldend = memchr(ptran+off, ';', nextparamoff-off);
++            nextfieldoff = (pfieldend == NULL) ? nextparamoff : pfieldend-ptran+1;
++
++            if (strncmp(ptran+off, "client_port=", 12) == 0)
++            {
++                u_int16_t   port;
++                uint        numlen;
++                uint        origoff;
++                uint        origlen;
++                char*       rbuf    = rbuf1;
++                uint        rbuflen = rbuf1len;
++
++                off += 12;
++                origoff = (ptran-ptcp)+off;
++                origlen = 0;
++                numlen = nf_strtou16(ptran+off, &port);
++                off += numlen;
++                origlen += numlen;
++                if (port != prtspexp->loport)
++                {
++                    DEBUGP("multiple ports found, port %hu ignored\n", port);
++                }
++                else
++                {
++                    if (ptran[off] == '-' || ptran[off] == '/')
++                    {
++                        off++;
++                        origlen++;
++                        numlen = nf_strtou16(ptran+off, &port);
++                        off += numlen;
++                        origlen += numlen;
++                        rbuf = rbufa;
++                        rbuflen = rbufalen;
++                    }
++
++                    /*
++                     * note we cannot just memcpy() if the sizes are the same.
++                     * the mangle function does skb resizing, checks for a
++                     * cloned skb, and updates the checksums.
++                     *
++                     * parameter 4 below is offset from start of tcp data.
++                     */
++                    diff = origlen-rbuflen;
++                    if (!nf_nat_mangle_tcp_packet(skb, ct, ctinfo,
++                                              origoff, origlen, rbuf, rbuflen))
++                    {
++                        /* mangle failed, all we can do is bail */
++			nf_ct_unexpect_related(exp);
++                        return 0;
++                    }
++                    get_skb_tcpdata(skb, &ptcp, &tcplen);
++                    ptran = ptcp+tranoff;
++                    tranlen -= diff;
++                    nextparamoff -= diff;
++                    nextfieldoff -= diff;
++                }
++            }
++
++            off = nextfieldoff;
++        }
++
++        off = nextparamoff;
++    }
++
++    return 1;
++}
++
++static uint
++help_out(struct sk_buff *skb, enum ip_conntrack_info ctinfo,
++	 unsigned int matchoff, unsigned int matchlen, struct ip_ct_rtsp_expect* prtspexp,
++	 struct nf_conntrack_expect* exp)
++{
++    char*   ptcp;
++    uint    tcplen;
++    uint    hdrsoff;
++    uint    hdrslen;
++    uint    lineoff;
++    uint    linelen;
++    uint    off;
++
++    //struct iphdr* iph = (struct iphdr*)skb->nh.iph;
++    //struct tcphdr* tcph = (struct tcphdr*)((void*)iph + iph->ihl*4);
++
++    get_skb_tcpdata(skb, &ptcp, &tcplen);
++    hdrsoff = matchoff;//exp->seq - ntohl(tcph->seq);
++    hdrslen = matchlen;
++    off = hdrsoff;
++    DEBUGP("NAT rtsp help_out\n");
++
++    while (nf_mime_nextline(ptcp, hdrsoff+hdrslen, &off, &lineoff, &linelen))
++    {
++        if (linelen == 0)
++        {
++            break;
++        }
++        if (off > hdrsoff+hdrslen)
++        {
++            INFOP("!! overrun !!");
++            break;
++        }
++        DEBUGP("hdr: len=%u, %.*s", linelen, (int)linelen, ptcp+lineoff);
++
++        if (nf_strncasecmp(ptcp+lineoff, "Transport:", 10) == 0)
++        {
++            uint oldtcplen = tcplen;
++	    DEBUGP("hdr: Transport\n");
++            if (!rtsp_mangle_tran(ctinfo, exp, prtspexp, skb, lineoff, linelen))
++            {
++		DEBUGP("hdr: Transport mangle failed");
++                break;
++            }
++            get_skb_tcpdata(skb, &ptcp, &tcplen);
++            hdrslen -= (oldtcplen-tcplen);
++            off -= (oldtcplen-tcplen);
++            lineoff -= (oldtcplen-tcplen);
++            linelen -= (oldtcplen-tcplen);
++            DEBUGP("rep: len=%u, %.*s", linelen, (int)linelen, ptcp+lineoff);
++        }
++    }
++
++    return NF_ACCEPT;
++}
++
++static unsigned int
++help(struct sk_buff *skb, enum ip_conntrack_info ctinfo,
++     unsigned int matchoff, unsigned int matchlen, struct ip_ct_rtsp_expect* prtspexp,
++     struct nf_conntrack_expect* exp)
++{
++    int dir = CTINFO2DIR(ctinfo);
++    int rc = NF_ACCEPT;
++
++    switch (dir)
++    {
++    case IP_CT_DIR_ORIGINAL:
++        rc = help_out(skb, ctinfo, matchoff, matchlen, prtspexp, exp);
++        break;
++    case IP_CT_DIR_REPLY:
++	DEBUGP("unmangle ! %u\n", ctinfo);
++    	/* XXX: unmangle */
++	rc = NF_ACCEPT;
++        break;
++    }
++    //UNLOCK_BH(&ip_rtsp_lock);
++
++    return rc;
++}
++
++static void expected(struct nf_conn* ct, struct nf_conntrack_expect *exp)
++{
++    struct nf_nat_multi_range_compat mr;
++    u_int32_t newdstip, newsrcip, newip;
++
++    struct nf_conn *master = ct->master;
++
++    newdstip = master->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
++    newsrcip = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
++    //FIXME (how to port that ?)
++    //code from 2.4 : newip = (HOOK2MANIP(hooknum) == IP_NAT_MANIP_SRC) ? newsrcip : newdstip;
++    newip = newdstip;
++
++    DEBUGP("newsrcip=%u.%u.%u.%u, newdstip=%u.%u.%u.%u, newip=%u.%u.%u.%u\n",
++           NIPQUAD(newsrcip), NIPQUAD(newdstip), NIPQUAD(newip));
++
++    mr.rangesize = 1;
++    // We don't want to manip the per-protocol, just the IPs.
++    mr.range[0].flags = IP_NAT_RANGE_MAP_IPS;
++    mr.range[0].min_ip = mr.range[0].max_ip = newip;
++
++    nf_nat_setup_info(ct, &mr.range[0], IP_NAT_MANIP_DST);
++}
++
++
++static void __exit fini(void)
++{
++	nf_nat_rtsp_hook = NULL;
++        nf_nat_rtsp_hook_expectfn = NULL;
++	synchronize_net();
++}
++
++static int __init init(void)
++{
++	printk("nf_nat_rtsp v" IP_NF_RTSP_VERSION " loading\n");
++
++	BUG_ON(nf_nat_rtsp_hook);
++	nf_nat_rtsp_hook = help;
++        nf_nat_rtsp_hook_expectfn = &expected;
++
++	if (stunaddr != NULL)
++		extip = in_aton(stunaddr);
++
++	if (destaction != NULL) {
++	        if (strcmp(destaction, "auto") == 0)
++			dstact = DSTACT_AUTO;
++
++		if (strcmp(destaction, "strip") == 0)
++			dstact = DSTACT_STRIP;
++
++		if (strcmp(destaction, "none") == 0)
++			dstact = DSTACT_NONE;
++	}
++
++	return 0;
++}
++
++module_init(init);
++module_exit(fini);
diff --git a/target/linux/generic/patches-2.6.25/200-sched_esfq.patch b/target/linux/generic/patches-2.6.25/200-sched_esfq.patch
new file mode 100644
index 0000000000..3f66e2c674
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/200-sched_esfq.patch
@@ -0,0 +1,797 @@
+--- a/include/linux/pkt_sched.h
++++ b/include/linux/pkt_sched.h
+@@ -162,8 +162,37 @@ struct tc_sfq_xstats
+  *
+  *	The only reason for this is efficiency, it is possible
+  *	to change these parameters in compile time.
++ *	
++ *	If you need to play with these values, use esfq instead.
+  */
+ 
++/* ESFQ section */
++
++enum
++{
++        /* traditional */
++	TCA_SFQ_HASH_CLASSIC,
++	TCA_SFQ_HASH_DST,
++	TCA_SFQ_HASH_SRC,
++	TCA_SFQ_HASH_FWMARK,
++	/* conntrack */
++	TCA_SFQ_HASH_CTORIGDST,
++	TCA_SFQ_HASH_CTORIGSRC,
++	TCA_SFQ_HASH_CTREPLDST,
++	TCA_SFQ_HASH_CTREPLSRC,
++	TCA_SFQ_HASH_CTNATCHG,
++};
++
++struct tc_esfq_qopt
++{
++	unsigned	quantum;	/* Bytes per round allocated to flow */
++	int		perturb_period;	/* Period of hash perturbation */
++	__u32		limit;		/* Maximal packets in queue */
++	unsigned	divisor;	/* Hash divisor  */
++	unsigned	flows;		/* Maximal number of flows  */
++	unsigned	hash_kind;	/* Hash function to use for flow identification */
++};
++
+ /* RED section */
+ 
+ enum
+--- a/net/sched/Kconfig
++++ b/net/sched/Kconfig
+@@ -139,6 +139,37 @@ config NET_SCH_SFQ
+ 	  To compile this code as a module, choose M here: the
+ 	  module will be called sch_sfq.
+ 
++config NET_SCH_ESFQ
++	tristate "Enhanced Stochastic Fairness Queueing (ESFQ)"
++	---help---
++	  Say Y here if you want to use the Enhanced Stochastic Fairness
++	  Queueing (ESFQ) packet scheduling algorithm for some of your network
++	  devices or as a leaf discipline for a classful qdisc such as HTB or
++	  CBQ (see the top of <file:net/sched/sch_esfq.c> for details and
++	  references to the SFQ algorithm).
++
++	  This is an enchanced SFQ version which allows you to control some
++	  hardcoded values in the SFQ scheduler.
++
++	  ESFQ also adds control of the hash function used to identify packet
++	  flows. The original SFQ discipline hashes by connection; ESFQ add
++	  several other hashing methods, such as by src IP or by dst IP, which
++	  can be more fair to users in some networking situations.
++	  
++	  To compile this code as a module, choose M here: the
++	  module will be called sch_esfq.
++
++config NET_SCH_ESFQ_NFCT
++	bool "Connection Tracking Hash Types"
++	depends on NET_SCH_ESFQ && NF_CONNTRACK
++	---help---
++	  Say Y here to enable support for hashing based on netfilter connection
++	  tracking information. This is useful for a router that is also using
++	  NAT to connect privately-addressed hosts to the Internet. If you want
++	  to provide fair distribution of upstream bandwidth, ESFQ must use
++	  connection tracking information, since all outgoing packets will share
++	  the same source address.
++
+ config NET_SCH_TEQL
+ 	tristate "True Link Equalizer (TEQL)"
+ 	---help---
+--- a/net/sched/Makefile
++++ b/net/sched/Makefile
+@@ -23,6 +23,7 @@ obj-$(CONFIG_NET_SCH_GRED)	+= sch_gred.o
+ obj-$(CONFIG_NET_SCH_INGRESS)	+= sch_ingress.o 
+ obj-$(CONFIG_NET_SCH_DSMARK)	+= sch_dsmark.o
+ obj-$(CONFIG_NET_SCH_SFQ)	+= sch_sfq.o
++obj-$(CONFIG_NET_SCH_ESFQ)	+= sch_esfq.o
+ obj-$(CONFIG_NET_SCH_TBF)	+= sch_tbf.o
+ obj-$(CONFIG_NET_SCH_TEQL)	+= sch_teql.o
+ obj-$(CONFIG_NET_SCH_PRIO)	+= sch_prio.o
+--- /dev/null
++++ b/net/sched/sch_esfq.c
+@@ -0,0 +1,704 @@
++/*
++ * net/sched/sch_esfq.c	Extended Stochastic Fairness Queueing discipline.
++ *
++ *		This program is free software; you can redistribute it and/or
++ *		modify it under the terms of the GNU General Public License
++ *		as published by the Free Software Foundation; either version
++ *		2 of the License, or (at your option) any later version.
++ *
++ * Authors:	Alexey Kuznetsov, <kuznet@ms2.inr.ac.ru>
++ *
++ * Changes:	Alexander Atanasov, <alex@ssi.bg>
++ *		Added dynamic depth,limit,divisor,hash_kind options.
++ *		Added dst and src hashes.
++ *
++ * 		Alexander Clouter, <alex@digriz.org.uk>
++ *		Ported ESFQ to Linux 2.6.
++ *
++ * 		Corey Hickey, <bugfood-c@fatooh.org>
++ *		Maintenance of the Linux 2.6 port.
++ *		Added fwmark hash (thanks to Robert Kurjata).
++ *		Added usage of jhash.
++ *		Added conntrack support.
++ *		Added ctnatchg hash (thanks to Ben Pfountz).
++ */
++
++#include <linux/module.h>
++#include <asm/uaccess.h>
++#include <asm/system.h>
++#include <linux/bitops.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/jiffies.h>
++#include <linux/string.h>
++#include <linux/mm.h>
++#include <linux/socket.h>
++#include <linux/sockios.h>
++#include <linux/in.h>
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/if_ether.h>
++#include <linux/inet.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/notifier.h>
++#include <linux/init.h>
++#include <net/ip.h>
++#include <linux/ipv6.h>
++#include <net/route.h>
++#include <linux/skbuff.h>
++#include <net/sock.h>
++#include <net/pkt_sched.h>
++#include <linux/jhash.h>
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++#include <net/netfilter/nf_conntrack.h>
++#endif
++
++/*	Stochastic Fairness Queuing algorithm.
++	For more comments look at sch_sfq.c.
++	The difference is that you can change limit, depth,
++	hash table size and choose alternate hash types.
++	
++	classic:	same as in sch_sfq.c
++	dst:		destination IP address
++	src:		source IP address
++	fwmark:		netfilter mark value
++	ctorigdst:	original destination IP address
++	ctorigsrc:	original source IP address
++	ctrepldst:	reply destination IP address
++	ctreplsrc:	reply source IP 
++	
++*/
++
++#define ESFQ_HEAD 0
++#define ESFQ_TAIL 1
++
++/* This type should contain at least SFQ_DEPTH*2 values */
++typedef unsigned int esfq_index;
++
++struct esfq_head
++{
++	esfq_index	next;
++	esfq_index	prev;
++};
++
++struct esfq_sched_data
++{
++/* Parameters */
++	int		perturb_period;
++	unsigned	quantum;	/* Allotment per round: MUST BE >= MTU */
++	int		limit;
++	unsigned	depth;
++	unsigned	hash_divisor;
++	unsigned	hash_kind;
++/* Variables */
++	struct timer_list perturb_timer;
++	int		perturbation;
++	esfq_index	tail;		/* Index of current slot in round */
++	esfq_index	max_depth;	/* Maximal depth */
++
++	esfq_index	*ht;			/* Hash table */
++	esfq_index	*next;			/* Active slots link */
++	short		*allot;			/* Current allotment per slot */
++	unsigned short	*hash;			/* Hash value indexed by slots */
++	struct sk_buff_head	*qs;		/* Slot queue */
++	struct esfq_head	*dep;		/* Linked list of slots, indexed by depth */
++};
++
++/* This contains the info we will hash. */
++struct esfq_packet_info
++{
++	u32	proto;		/* protocol or port */
++	u32	src;		/* source from packet header */
++	u32	dst;		/* destination from packet header */
++	u32	ctorigsrc;	/* original source from conntrack */
++	u32	ctorigdst;	/* original destination from conntrack */
++	u32	ctreplsrc;	/* reply source from conntrack */
++	u32	ctrepldst;	/* reply destination from conntrack */
++	u32	mark;		/* netfilter mark (fwmark) */
++};
++
++static __inline__ unsigned esfq_jhash_1word(struct esfq_sched_data *q,u32 a)
++{
++	return jhash_1word(a, q->perturbation) & (q->hash_divisor-1);
++}
++
++static __inline__ unsigned esfq_jhash_2words(struct esfq_sched_data *q, u32 a, u32 b)
++{
++	return jhash_2words(a, b, q->perturbation) & (q->hash_divisor-1);
++}
++
++static __inline__ unsigned esfq_jhash_3words(struct esfq_sched_data *q, u32 a, u32 b, u32 c)
++{
++	return jhash_3words(a, b, c, q->perturbation) & (q->hash_divisor-1);
++}
++
++static unsigned esfq_hash(struct esfq_sched_data *q, struct sk_buff *skb)
++{
++	struct esfq_packet_info info;
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++	enum ip_conntrack_info ctinfo;
++	struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
++#endif
++	
++	switch (skb->protocol) {
++	case __constant_htons(ETH_P_IP):
++	{
++		struct iphdr *iph = ip_hdr(skb);
++		info.dst = iph->daddr;
++		info.src = iph->saddr;
++		if (!(iph->frag_off&htons(IP_MF|IP_OFFSET)) &&
++		    (iph->protocol == IPPROTO_TCP ||
++		     iph->protocol == IPPROTO_UDP ||
++		     iph->protocol == IPPROTO_SCTP ||
++		     iph->protocol == IPPROTO_DCCP ||
++		     iph->protocol == IPPROTO_ESP))
++			info.proto = *(((u32*)iph) + iph->ihl);
++		else
++			info.proto = iph->protocol;
++		break;
++	}
++	case __constant_htons(ETH_P_IPV6):
++	{
++		struct ipv6hdr *iph = ipv6_hdr(skb);
++		/* Hash ipv6 addresses into a u32. This isn't ideal,
++		 * but the code is simple. */
++		info.dst = jhash2(iph->daddr.s6_addr32, 4, q->perturbation);
++		info.src = jhash2(iph->saddr.s6_addr32, 4, q->perturbation);
++		if (iph->nexthdr == IPPROTO_TCP ||
++		    iph->nexthdr == IPPROTO_UDP ||
++		    iph->nexthdr == IPPROTO_SCTP ||
++		    iph->nexthdr == IPPROTO_DCCP ||
++		    iph->nexthdr == IPPROTO_ESP)
++			info.proto = *(u32*)&iph[1];
++		else
++			info.proto = iph->nexthdr;
++		break;
++	}
++	default:
++		info.dst   = (u32)(unsigned long)skb->dst;
++		info.src   = (u32)(unsigned long)skb->sk;
++		info.proto = skb->protocol;
++	}
++
++	info.mark = skb->mark;
++
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++	/* defaults if there is no conntrack info */
++	info.ctorigsrc = info.src;
++	info.ctorigdst = info.dst;
++	info.ctreplsrc = info.dst;
++	info.ctrepldst = info.src;
++	/* collect conntrack info */
++	if (ct && ct != &nf_conntrack_untracked) {
++		if (skb->protocol == __constant_htons(ETH_P_IP)) {
++			info.ctorigsrc = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
++			info.ctorigdst = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3.ip;
++			info.ctreplsrc = ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3.ip;
++			info.ctrepldst = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip;
++		}
++		else if (skb->protocol == __constant_htons(ETH_P_IPV6)) {
++			/* Again, hash ipv6 addresses into a single u32. */
++			info.ctorigsrc = jhash2(ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip6, 4, q->perturbation);
++			info.ctorigdst = jhash2(ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3.ip6, 4, q->perturbation);
++			info.ctreplsrc = jhash2(ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3.ip6, 4, q->perturbation);
++			info.ctrepldst = jhash2(ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip6, 4, q->perturbation);
++		}
++
++	}
++#endif
++
++	switch(q->hash_kind) {
++	case TCA_SFQ_HASH_CLASSIC:
++		return esfq_jhash_3words(q, info.dst, info.src, info.proto);
++	case TCA_SFQ_HASH_DST:
++		return esfq_jhash_1word(q, info.dst);
++	case TCA_SFQ_HASH_SRC:
++		return esfq_jhash_1word(q, info.src);
++	case TCA_SFQ_HASH_FWMARK:
++		return esfq_jhash_1word(q, info.mark);
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++	case TCA_SFQ_HASH_CTORIGDST:
++		return esfq_jhash_1word(q, info.ctorigdst);
++	case TCA_SFQ_HASH_CTORIGSRC:
++		return esfq_jhash_1word(q, info.ctorigsrc);
++	case TCA_SFQ_HASH_CTREPLDST:
++		return esfq_jhash_1word(q, info.ctrepldst);
++	case TCA_SFQ_HASH_CTREPLSRC:
++		return esfq_jhash_1word(q, info.ctreplsrc);
++	case TCA_SFQ_HASH_CTNATCHG:
++	{
++		if (info.ctorigdst == info.ctreplsrc)
++			return esfq_jhash_1word(q, info.ctorigsrc);
++		return esfq_jhash_1word(q, info.ctreplsrc);
++	}
++#endif
++	default:
++		if (net_ratelimit())
++			printk(KERN_WARNING "ESFQ: Unknown hash method. Falling back to classic.\n");
++	}
++	return esfq_jhash_3words(q, info.dst, info.src, info.proto);
++}
++
++static inline void esfq_link(struct esfq_sched_data *q, esfq_index x)
++{
++	esfq_index p, n;
++	int d = q->qs[x].qlen + q->depth;
++
++	p = d;
++	n = q->dep[d].next;
++	q->dep[x].next = n;
++	q->dep[x].prev = p;
++	q->dep[p].next = q->dep[n].prev = x;
++}
++
++static inline void esfq_dec(struct esfq_sched_data *q, esfq_index x)
++{
++	esfq_index p, n;
++
++	n = q->dep[x].next;
++	p = q->dep[x].prev;
++	q->dep[p].next = n;
++	q->dep[n].prev = p;
++
++	if (n == p && q->max_depth == q->qs[x].qlen + 1)
++		q->max_depth--;
++
++	esfq_link(q, x);
++}
++
++static inline void esfq_inc(struct esfq_sched_data *q, esfq_index x)
++{
++	esfq_index p, n;
++	int d;
++
++	n = q->dep[x].next;
++	p = q->dep[x].prev;
++	q->dep[p].next = n;
++	q->dep[n].prev = p;
++	d = q->qs[x].qlen;
++	if (q->max_depth < d)
++		q->max_depth = d;
++
++	esfq_link(q, x);
++}
++
++static unsigned int esfq_drop(struct Qdisc *sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_index d = q->max_depth;
++	struct sk_buff *skb;
++	unsigned int len;
++
++	/* Queue is full! Find the longest slot and
++	   drop a packet from it */
++
++	if (d > 1) {
++		esfq_index x = q->dep[d+q->depth].next;
++		skb = q->qs[x].prev;
++		len = skb->len;
++		__skb_unlink(skb, &q->qs[x]);
++		kfree_skb(skb);
++		esfq_dec(q, x);
++		sch->q.qlen--;
++		sch->qstats.drops++;
++		sch->qstats.backlog -= len;
++		return len;
++	}
++
++	if (d == 1) {
++		/* It is difficult to believe, but ALL THE SLOTS HAVE LENGTH 1. */
++		d = q->next[q->tail];
++		q->next[q->tail] = q->next[d];
++		q->allot[q->next[d]] += q->quantum;
++		skb = q->qs[d].prev;
++		len = skb->len;
++		__skb_unlink(skb, &q->qs[d]);
++		kfree_skb(skb);
++		esfq_dec(q, d);
++		sch->q.qlen--;
++		q->ht[q->hash[d]] = q->depth;
++		sch->qstats.drops++;
++		sch->qstats.backlog -= len;
++		return len;
++	}
++
++	return 0;
++}
++
++static void esfq_q_enqueue(struct sk_buff *skb, struct esfq_sched_data *q, unsigned int end)
++{
++	unsigned hash = esfq_hash(q, skb);
++	unsigned depth = q->depth;
++	esfq_index x;
++
++	x = q->ht[hash];
++	if (x == depth) {
++		q->ht[hash] = x = q->dep[depth].next;
++		q->hash[x] = hash;
++	}
++
++	if (end == ESFQ_TAIL)
++		__skb_queue_tail(&q->qs[x], skb);
++	else
++		__skb_queue_head(&q->qs[x], skb);
++
++	esfq_inc(q, x);
++	if (q->qs[x].qlen == 1) {		/* The flow is new */
++		if (q->tail == depth) {	/* It is the first flow */
++			q->tail = x;
++			q->next[x] = x;
++			q->allot[x] = q->quantum;
++		} else {
++			q->next[x] = q->next[q->tail];
++			q->next[q->tail] = x;
++			q->tail = x;
++		}
++	}
++}
++
++static int esfq_enqueue(struct sk_buff *skb, struct Qdisc* sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_q_enqueue(skb, q, ESFQ_TAIL);
++	sch->qstats.backlog += skb->len;
++	if (++sch->q.qlen < q->limit-1) {
++		sch->bstats.bytes += skb->len;
++		sch->bstats.packets++;
++		return 0;
++	}
++
++	sch->qstats.drops++;
++	esfq_drop(sch);
++	return NET_XMIT_CN;
++}
++
++
++static int esfq_requeue(struct sk_buff *skb, struct Qdisc* sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_q_enqueue(skb, q, ESFQ_HEAD);
++	sch->qstats.backlog += skb->len;
++	if (++sch->q.qlen < q->limit - 1) {
++		sch->qstats.requeues++;
++		return 0;
++	}
++
++	sch->qstats.drops++;
++	esfq_drop(sch);
++	return NET_XMIT_CN;
++}
++
++static struct sk_buff *esfq_q_dequeue(struct esfq_sched_data *q)
++{
++	struct sk_buff *skb;
++	unsigned depth = q->depth;
++	esfq_index a, old_a;
++
++	/* No active slots */
++	if (q->tail == depth)
++		return NULL;
++	
++	a = old_a = q->next[q->tail];
++	
++	/* Grab packet */
++	skb = __skb_dequeue(&q->qs[a]);
++	esfq_dec(q, a);
++	
++	/* Is the slot empty? */
++	if (q->qs[a].qlen == 0) {
++		q->ht[q->hash[a]] = depth;
++		a = q->next[a];
++		if (a == old_a) {
++			q->tail = depth;
++			return skb;
++		}
++		q->next[q->tail] = a;
++		q->allot[a] += q->quantum;
++	} else if ((q->allot[a] -= skb->len) <= 0) {
++		q->tail = a;
++		a = q->next[a];
++		q->allot[a] += q->quantum;
++	}
++	
++	return skb;
++}
++
++static struct sk_buff *esfq_dequeue(struct Qdisc* sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	struct sk_buff *skb;
++
++	skb = esfq_q_dequeue(q);
++	if (skb == NULL)
++		return NULL;
++	sch->q.qlen--;
++	sch->qstats.backlog -= skb->len;
++	return skb;
++}
++
++static void esfq_q_destroy(struct esfq_sched_data *q)
++{
++	del_timer(&q->perturb_timer);
++	if(q->ht)
++		kfree(q->ht);
++	if(q->dep)
++		kfree(q->dep);
++	if(q->next)
++		kfree(q->next);
++	if(q->allot)
++		kfree(q->allot);
++	if(q->hash)
++		kfree(q->hash);
++	if(q->qs)
++		kfree(q->qs);
++}
++
++static void esfq_destroy(struct Qdisc *sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_q_destroy(q);
++}
++
++
++static void esfq_reset(struct Qdisc* sch)
++{
++	struct sk_buff *skb;
++
++	while ((skb = esfq_dequeue(sch)) != NULL)
++		kfree_skb(skb);
++}
++
++static void esfq_perturbation(unsigned long arg)
++{
++	struct Qdisc *sch = (struct Qdisc*)arg;
++	struct esfq_sched_data *q = qdisc_priv(sch);
++
++	q->perturbation = net_random()&0x1F;
++
++	if (q->perturb_period) {
++		q->perturb_timer.expires = jiffies + q->perturb_period;
++		add_timer(&q->perturb_timer);
++	}
++}
++
++static unsigned int esfq_check_hash(unsigned int kind)
++{
++	switch (kind) {
++	case TCA_SFQ_HASH_CTORIGDST:
++	case TCA_SFQ_HASH_CTORIGSRC:
++	case TCA_SFQ_HASH_CTREPLDST:
++	case TCA_SFQ_HASH_CTREPLSRC:
++	case TCA_SFQ_HASH_CTNATCHG:
++#ifndef CONFIG_NET_SCH_ESFQ_NFCT
++	{
++		if (net_ratelimit())
++			printk(KERN_WARNING "ESFQ: Conntrack hash types disabled in kernel config. Falling back to classic.\n");
++		return TCA_SFQ_HASH_CLASSIC;
++	}
++#endif
++	case TCA_SFQ_HASH_CLASSIC:
++	case TCA_SFQ_HASH_DST:
++	case TCA_SFQ_HASH_SRC:
++	case TCA_SFQ_HASH_FWMARK:
++		return kind;
++	default:
++	{
++		if (net_ratelimit())
++			printk(KERN_WARNING "ESFQ: Unknown hash type. Falling back to classic.\n");
++		return TCA_SFQ_HASH_CLASSIC;
++	}
++	}
++}
++	
++static int esfq_q_init(struct esfq_sched_data *q, struct rtattr *opt)
++{
++	struct tc_esfq_qopt *ctl = RTA_DATA(opt);
++	esfq_index p = ~0U/2;
++	int i;
++	
++	if (opt && opt->rta_len < RTA_LENGTH(sizeof(*ctl)))
++		return -EINVAL;
++
++	q->perturbation = 0;
++	q->hash_kind = TCA_SFQ_HASH_CLASSIC;
++	q->max_depth = 0;
++	if (opt == NULL) {
++		q->perturb_period = 0;
++		q->hash_divisor = 1024;
++		q->tail = q->limit = q->depth = 128;
++		
++	} else {
++		struct tc_esfq_qopt *ctl = RTA_DATA(opt);
++		if (ctl->quantum)
++			q->quantum = ctl->quantum;
++		q->perturb_period = ctl->perturb_period*HZ;
++		q->hash_divisor = ctl->divisor ? : 1024;
++		q->tail = q->limit = q->depth = ctl->flows ? : 128;
++		
++		if ( q->depth > p - 1 )
++			return -EINVAL;
++		
++		if (ctl->limit)
++			q->limit = min_t(u32, ctl->limit, q->depth);
++		
++		if (ctl->hash_kind) {
++			q->hash_kind = esfq_check_hash(ctl->hash_kind);
++		}
++	}
++	
++	q->ht = kmalloc(q->hash_divisor*sizeof(esfq_index), GFP_KERNEL);
++	if (!q->ht)
++		goto err_case;
++	q->dep = kmalloc((1+q->depth*2)*sizeof(struct esfq_head), GFP_KERNEL);
++	if (!q->dep)
++		goto err_case;
++	q->next = kmalloc(q->depth*sizeof(esfq_index), GFP_KERNEL);
++	if (!q->next)
++		goto err_case;
++	q->allot = kmalloc(q->depth*sizeof(short), GFP_KERNEL);
++	if (!q->allot)
++		goto err_case;
++	q->hash = kmalloc(q->depth*sizeof(unsigned short), GFP_KERNEL);
++	if (!q->hash)
++		goto err_case;
++	q->qs = kmalloc(q->depth*sizeof(struct sk_buff_head), GFP_KERNEL);
++	if (!q->qs)
++		goto err_case;
++	
++	for (i=0; i< q->hash_divisor; i++)
++		q->ht[i] = q->depth;
++	for (i=0; i<q->depth; i++) {
++		skb_queue_head_init(&q->qs[i]);
++		q->dep[i+q->depth].next = i+q->depth;
++		q->dep[i+q->depth].prev = i+q->depth;
++	}
++	
++	for (i=0; i<q->depth; i++)
++		esfq_link(q, i);
++	return 0;
++err_case:
++	esfq_q_destroy(q);
++	return -ENOBUFS;
++}
++
++static int esfq_init(struct Qdisc *sch, struct rtattr *opt)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	int err;
++	
++	q->quantum = psched_mtu(sch->dev); /* default */
++	if ((err = esfq_q_init(q, opt)))
++		return err;
++
++	init_timer(&q->perturb_timer);
++	q->perturb_timer.data = (unsigned long)sch;
++	q->perturb_timer.function = esfq_perturbation;
++	if (q->perturb_period) {
++		q->perturb_timer.expires = jiffies + q->perturb_period;
++		add_timer(&q->perturb_timer);
++	}
++	
++	return 0;
++}
++
++static int esfq_change(struct Qdisc *sch, struct rtattr *opt)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	struct esfq_sched_data new;
++	struct sk_buff *skb;
++	int err;
++	
++	/* set up new queue */
++	memset(&new, 0, sizeof(struct esfq_sched_data));
++	new.quantum = psched_mtu(sch->dev); /* default */
++	if ((err = esfq_q_init(&new, opt)))
++		return err;
++
++	/* copy all packets from the old queue to the new queue */
++	sch_tree_lock(sch);
++	while ((skb = esfq_q_dequeue(q)) != NULL)
++		esfq_q_enqueue(skb, &new, ESFQ_TAIL);
++	
++	/* clean up the old queue */
++	esfq_q_destroy(q);
++
++	/* copy elements of the new queue into the old queue */
++	q->perturb_period = new.perturb_period;
++	q->quantum        = new.quantum;
++	q->limit          = new.limit;
++	q->depth          = new.depth;
++	q->hash_divisor   = new.hash_divisor;
++	q->hash_kind      = new.hash_kind;
++	q->tail           = new.tail;
++	q->max_depth      = new.max_depth;
++	q->ht    = new.ht;
++	q->dep   = new.dep;
++	q->next  = new.next;
++	q->allot = new.allot;
++	q->hash  = new.hash;
++	q->qs    = new.qs;
++
++	/* finish up */
++	if (q->perturb_period) {
++		q->perturb_timer.expires = jiffies + q->perturb_period;
++		add_timer(&q->perturb_timer);
++	} else {
++		q->perturbation = 0;
++	}
++	sch_tree_unlock(sch);
++	return 0;
++}
++
++static int esfq_dump(struct Qdisc *sch, struct sk_buff *skb)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	unsigned char *b = skb->tail;
++	struct tc_esfq_qopt opt;
++
++	opt.quantum = q->quantum;
++	opt.perturb_period = q->perturb_period/HZ;
++
++	opt.limit = q->limit;
++	opt.divisor = q->hash_divisor;
++	opt.flows = q->depth;
++	opt.hash_kind = q->hash_kind;
++
++	RTA_PUT(skb, TCA_OPTIONS, sizeof(opt), &opt);
++
++	return skb->len;
++
++rtattr_failure:
++	skb_trim(skb, b - skb->data);
++	return -1;
++}
++
++static struct Qdisc_ops esfq_qdisc_ops =
++{
++	.next		=	NULL,
++	.cl_ops		=	NULL,
++	.id		=	"esfq",
++	.priv_size	=	sizeof(struct esfq_sched_data),
++	.enqueue	=	esfq_enqueue,
++	.dequeue	=	esfq_dequeue,
++	.requeue	=	esfq_requeue,
++	.drop		=	esfq_drop,
++	.init		=	esfq_init,
++	.reset		=	esfq_reset,
++	.destroy	=	esfq_destroy,
++	.change		=	esfq_change,
++	.dump		=	esfq_dump,
++	.owner		=	THIS_MODULE,
++};
++
++static int __init esfq_module_init(void)
++{
++	return register_qdisc(&esfq_qdisc_ops);
++}
++static void __exit esfq_module_exit(void) 
++{
++	unregister_qdisc(&esfq_qdisc_ops);
++}
++module_init(esfq_module_init)
++module_exit(esfq_module_exit)
++MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/patches-2.6.25/204-jffs2_eofdetect.patch b/target/linux/generic/patches-2.6.25/204-jffs2_eofdetect.patch
new file mode 100644
index 0000000000..eccdbe2f92
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/204-jffs2_eofdetect.patch
@@ -0,0 +1,56 @@
+--- a/fs/jffs2/build.c
++++ b/fs/jffs2/build.c
+@@ -105,6 +105,17 @@ static int jffs2_build_filesystem(struct
+ 	dbg_fsbuild("scanned flash completely\n");
+ 	jffs2_dbg_dump_block_lists_nolock(c);
+ 
++	if (c->flags & (1 << 7)) {
++		printk("%s(): unlocking the mtd device... ", __func__);
++		if (c->mtd->unlock)
++			c->mtd->unlock(c->mtd, 0, c->mtd->size);
++		printk("done.\n");
++		
++		printk("%s(): erasing all blocks after the end marker... ", __func__);
++		jffs2_erase_pending_blocks(c, -1);
++		printk("done.\n");
++	}
++
+ 	dbg_fsbuild("pass 1 starting\n");
+ 	c->flags |= JFFS2_SB_FLAG_BUILDING;
+ 	/* Now scan the directory tree, increasing nlink according to every dirent found. */
+--- a/fs/jffs2/scan.c
++++ b/fs/jffs2/scan.c
+@@ -142,9 +142,12 @@ int jffs2_scan_medium(struct jffs2_sb_in
+ 
+ 		/* reset summary info for next eraseblock scan */
+ 		jffs2_sum_reset_collected(s);
+-
+-		ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
+-						buf_size, s);
++		
++		if (c->flags & (1 << 7))
++			ret = BLK_STATE_ALLFF;
++		else
++			ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
++							buf_size, s);
+ 
+ 		if (ret < 0)
+ 			goto out;
+@@ -545,6 +548,17 @@ static int jffs2_scan_eraseblock (struct
+ 			return err;
+ 	}
+ 
++	if ((buf[0] == 0xde) &&
++		(buf[1] == 0xad) &&
++		(buf[2] == 0xc0) &&
++		(buf[3] == 0xde)) {
++		/* end of filesystem. erase everything after this point */
++		printk("%s(): End of filesystem marker found at 0x%x\n", __func__, jeb->offset);
++		c->flags |= (1 << 7);
++
++		return BLK_STATE_ALLFF;
++	}
++	
+ 	/* We temporarily use 'ofs' as a pointer into the buffer/jeb */
+ 	ofs = 0;
+ 
diff --git a/target/linux/generic/patches-2.6.25/207-powerpc_asm_segment_h.patch b/target/linux/generic/patches-2.6.25/207-powerpc_asm_segment_h.patch
new file mode 100644
index 0000000000..1272e82c75
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/207-powerpc_asm_segment_h.patch
@@ -0,0 +1,9 @@
+--- /dev/null
++++ b/include/asm-powerpc/segment.h
+@@ -0,0 +1,6 @@
++#ifndef _ASM_SEGMENT_H
++#define _ASM_SEGMENT_H
++
++/* Only here because we have some old header files that expect it.. */
++
++#endif /* _ASM_SEGMENT_H */
diff --git a/target/linux/generic/patches-2.6.25/208-rtl8110sb_fix.patch b/target/linux/generic/patches-2.6.25/208-rtl8110sb_fix.patch
new file mode 100644
index 0000000000..2196a494b2
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/208-rtl8110sb_fix.patch
@@ -0,0 +1,42 @@
+--- a/drivers/net/r8169.c
++++ b/drivers/net/r8169.c
+@@ -1539,7 +1539,7 @@ static const struct rtl_cfg_info {
+ 		.hw_start	= rtl_hw_start_8169,
+ 		.region		= 1,
+ 		.align		= 0,
+-		.intr_event	= SYSErr | LinkChg | RxOverflow |
++		.intr_event	= LinkChg | RxOverflow |
+ 				  RxFIFOOver | TxErr | TxOK | RxOK | RxErr,
+ 		.napi_event	= RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow,
+ 		.msi		= 0
+@@ -1548,7 +1548,7 @@ static const struct rtl_cfg_info {
+ 		.hw_start	= rtl_hw_start_8168,
+ 		.region		= 2,
+ 		.align		= 8,
+-		.intr_event	= SYSErr | LinkChg | RxOverflow |
++		.intr_event	= LinkChg | RxOverflow |
+ 				  TxErr | TxOK | RxOK | RxErr,
+ 		.napi_event	= TxErr | TxOK | RxOK | RxOverflow,
+ 		.msi		= RTL_FEATURE_MSI
+@@ -1557,7 +1557,7 @@ static const struct rtl_cfg_info {
+ 		.hw_start	= rtl_hw_start_8101,
+ 		.region		= 2,
+ 		.align		= 8,
+-		.intr_event	= SYSErr | LinkChg | RxOverflow | PCSTimeout |
++		.intr_event	= LinkChg | RxOverflow | PCSTimeout |
+ 				  RxFIFOOver | TxErr | TxOK | RxOK | RxErr,
+ 		.napi_event	= RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow,
+ 		.msi		= RTL_FEATURE_MSI
+@@ -2905,10 +2905,12 @@ static irqreturn_t rtl8169_interrupt(int
+ 			break;
+ 		}
+ 
++#if 0
+ 		if (unlikely(status & SYSErr)) {
+ 			rtl8169_pcierr_interrupt(dev);
+ 			break;
+ 		}
++#endif
+ 
+ 		if (status & LinkChg)
+ 			rtl8169_check_link_status(dev, tp, ioaddr);
diff --git a/target/linux/generic/patches-2.6.25/209-mini_fo.patch b/target/linux/generic/patches-2.6.25/209-mini_fo.patch
new file mode 100644
index 0000000000..9d76d01595
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/209-mini_fo.patch
@@ -0,0 +1,7776 @@
+--- a/fs/Kconfig
++++ b/fs/Kconfig
+@@ -1449,6 +1449,9 @@ config VXFS_FS
+ 	  To compile this as a module, choose M here: the module will be
+ 	  called freevxfs.  If unsure, say N.
+ 
++config MINI_FO
++	tristate "Mini fanout overlay filesystem"
++
+ config MINIX_FS
+ 	tristate "Minix file system support"
+ 	depends on BLOCK
+--- a/fs/Makefile
++++ b/fs/Makefile
+@@ -77,6 +77,7 @@ obj-$(CONFIG_SQUASHFS)		+= squashfs/
+ obj-y				+= ramfs/
+ obj-$(CONFIG_HUGETLBFS)		+= hugetlbfs/
+ obj-$(CONFIG_CODA_FS)		+= coda/
++obj-$(CONFIG_MINI_FO)		+= mini_fo/
+ obj-$(CONFIG_MINIX_FS)		+= minix/
+ obj-$(CONFIG_FAT_FS)		+= fat/
+ obj-$(CONFIG_MSDOS_FS)		+= msdos/
+--- /dev/null
++++ b/fs/mini_fo/aux.c
+@@ -0,0 +1,577 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++
++/* check if file exists in storage  */
++int exists_in_storage(dentry_t *dentry)
++{
++	check_mini_fo_dentry(dentry);
++	if(dtost(dentry) == MODIFIED || dtost(dentry) == CREATED || dtost(dentry) == DEL_REWRITTEN)
++		return 1;
++	return 0;
++}
++
++/* check if dentry is in an existing state */
++int is_mini_fo_existant(dentry_t *dentry)
++{
++	check_mini_fo_dentry(dentry);
++
++	if(dtost(dentry) == DELETED || dtost(dentry) == NON_EXISTANT)
++		return 0;
++	else
++		return 1;
++}
++
++/*
++ * This function will create a negative storage dentry for
++ * dentry, what is required for many create like options.
++ * It will create the storage structure if necessary.
++ */
++int get_neg_sto_dentry(dentry_t *dentry)
++{
++	int err = 0;
++	unsigned int len;
++	const unsigned char *name;
++
++	if(!dentry ||
++	   !dtopd(dentry) ||
++	   !(dtost(dentry) == UNMODIFIED ||
++	     dtost(dentry) == NON_EXISTANT ||
++	     dtost(dentry) == DELETED)) {
++		printk(KERN_CRIT "mini_fo: get_neg_sto_dentry: invalid dentry passed.\n");
++		err = -1;
++		goto out;
++	}
++	/* Have we got a neg. dentry already? */
++	if(dtohd2(dentry)) {
++		err = 0;
++		goto out;
++	}
++	if(dtost(dentry->d_parent) == UNMODIFIED) {
++		/* build sto struct */
++		err = build_sto_structure(dentry->d_parent->d_parent, dentry->d_parent);
++		if(err ||
++		   dtost(dentry->d_parent) != MODIFIED) {
++			printk(KERN_CRIT "mini_fo: get_neg_sto_dentry: ERROR building sto structure.\n");
++			err = -1;
++			goto out;
++		}
++	}
++
++	len = dentry->d_name.len;
++	name = dentry->d_name.name;
++
++	dtohd2(dentry) =
++		lookup_one_len(name, dtohd2(dentry->d_parent), len);
++
++ out:
++	return err;
++}
++
++int check_mini_fo_dentry(dentry_t *dentry)
++{
++ 	ASSERT(dentry != NULL);
++	ASSERT(dtopd(dentry) != NULL);
++	ASSERT((dtohd(dentry) != NULL) || (dtohd2(dentry) != NULL));
++
++/* 	if(dtost(dentry) == MODIFIED) { */
++/* 		ASSERT(dentry->d_inode != NULL); */
++/* 		ASSERT(dtohd(dentry) != NULL); */
++/* 		ASSERT(dtohd(dentry)->d_inode != NULL); */
++/* 		ASSERT(dtohd2(dentry) != NULL); */
++/* 		ASSERT(dtohd2(dentry)->d_inode != NULL); */
++/* 	} */
++/* 	else if(dtost(dentry) == UNMODIFIED) { */
++/* 		ASSERT(dentry->d_inode != NULL); */
++/* 		ASSERT( */
++/* 	} */
++	return 0;
++}
++
++int check_mini_fo_file(file_t *file)
++{
++	ASSERT(file != NULL);
++	ASSERT(ftopd(file) != NULL);
++	ASSERT(file->f_dentry != NULL);
++
++	/* violent checking, check depending of state and type
++	 *	if(S_ISDIR(file->f_dentry->d_inode->i_mode)) {}
++	 */
++	ASSERT((ftohf(file) != NULL) || (ftohf2(file) != NULL));
++	return 0;
++}
++
++int check_mini_fo_inode(inode_t *inode)
++{
++	ASSERT(inode != NULL);
++	ASSERT(itopd(inode) != NULL);
++	ASSERT((itohi(inode) != NULL) || (itohi2(inode) != NULL));
++	return 0;
++}
++
++/*
++ * will walk a base path as provided by get_mini_fo_bpath and return
++ * the (hopefully ;-) ) positive dentry of the renamed base dir.
++ *
++ * This does some work of path_init.
++ */
++dentry_t *bpath_walk(super_block_t *sb, char *bpath)
++{
++	int err;
++        struct vfsmount *mnt;
++	struct nameidata nd;
++
++	/* be paranoid */
++	if(!bpath || bpath[0] != '/') {
++		printk(KERN_CRIT "mini_fo: bpath_walk: Invalid string.\n");
++		return NULL;
++	}
++	if(!sb || !stopd(sb)) {
++		printk(KERN_CRIT "mini_fo: bpath_walk: Invalid sb.\n");
++		return NULL;
++	}
++
++	/* fix this: how do I reach this lock?
++	 * read_lock(&current->fs->lock); */
++	mnt = mntget(stopd(sb)->hidden_mnt);
++	/* read_unlock(&current->fs->lock); */
++
++	err = vfs_path_lookup(mnt->mnt_root, mnt, bpath+1, 0, &nd);
++
++	/* validate */
++	if (err || !nd.dentry || !nd.dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: bpath_walk: path_walk failed.\n");
++		return NULL;
++	}
++	return nd.dentry;
++}
++
++
++/* returns the full path of the basefile incl. its name */
++int get_mini_fo_bpath(dentry_t *dentry, char **bpath, int *bpath_len)
++{
++	char *buf_walker;
++	int len = 0;
++	dentry_t *sky_walker;
++
++	if(!dentry || !dtohd(dentry)) {
++		printk(KERN_CRIT "mini_fo: get_mini_fo_bpath: invalid dentry passed.\n");
++		return -1;
++	}
++	sky_walker = dtohd(dentry);
++
++	do {
++		len += sky_walker->d_name.len + 1 ; /* 1 for '/' */
++		sky_walker = sky_walker->d_parent;
++	} while(sky_walker != stopd(dentry->d_inode->i_sb)->base_dir_dentry);
++
++	/* 1 to oil the loop */
++	*bpath = (char*)  kmalloc(len + 1, GFP_KERNEL);
++	if(!*bpath) {
++		printk(KERN_CRIT "mini_fo: get_mini_fo_bpath: out of mem.\n");
++		return -1;
++	}
++	buf_walker = *bpath+len; /* put it on last char */
++	*buf_walker = '\n';
++	sky_walker = dtohd(dentry);
++
++	do {
++		buf_walker -= sky_walker->d_name.len;
++		strncpy(buf_walker,
++			sky_walker->d_name.name,
++			sky_walker->d_name.len);
++		*(--buf_walker) = '/';
++		sky_walker = sky_walker->d_parent;
++	} while(sky_walker != stopd(dentry->d_inode->i_sb)->base_dir_dentry);
++
++	/* bpath_len doesn't count newline! */
++	*bpath_len = len;
++ 	return 0;
++}
++
++int mini_fo_cp_cont(dentry_t *tgt_dentry, struct vfsmount *tgt_mnt,
++		    dentry_t *src_dentry, struct vfsmount *src_mnt)
++{
++	void *buf;
++	mm_segment_t old_fs;
++	file_t *tgt_file;
++	file_t *src_file;
++	int bytes, len, tmp, err;
++	err = 0;
++
++	if(!(tgt_dentry->d_inode && src_dentry->d_inode)) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR, neg. dentry passed.\n");
++		err = -EINVAL;
++		goto out;
++	}
++
++	dget(tgt_dentry);
++	dget(src_dentry);
++	mntget(tgt_mnt);
++	mntget(src_mnt);
++
++	/* open file write only */
++	tgt_file = dentry_open(tgt_dentry, tgt_mnt, 0x1);
++	if(!tgt_file || IS_ERR(tgt_file)) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR opening target file.\n");
++		err = PTR_ERR(tgt_file);
++		goto out_err;
++	}
++
++	/* open file read only */
++	src_file = dentry_open(src_dentry, src_mnt, 0x0);
++	if(!src_file || IS_ERR(src_file)) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR opening source file.\n");
++		err = PTR_ERR(src_file);
++
++		/* close target file */
++		fput(tgt_file);
++		goto out_err;
++	}
++
++	/* check if the filesystem(s) support read respective write */
++	if(!src_file->f_op->read || !tgt_file->f_op->write) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR, no fs read or write support.\n");
++		err = -EPERM;
++		goto out_close;
++	}
++
++	/* allocate a page for transfering the data */
++	buf = (void *) __get_free_page(GFP_KERNEL);
++	if(!buf) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR, out of kernel mem.\n");
++		goto out_err;
++	}
++
++	tgt_file->f_pos = 0;
++	src_file->f_pos = 0;
++
++	old_fs = get_fs();
++	set_fs(KERNEL_DS);
++
++	/* Doing this I assume that a read operation will return a full
++	 * buffer while there is still data to read, and a less than
++	 * full buffer when all data has been read.
++	 */
++	bytes = len = PAGE_SIZE;
++	while(bytes == len) {
++		bytes = src_file->f_op->read(src_file, buf, len,
++					     &src_file->f_pos);
++		tmp = tgt_file->f_op->write(tgt_file, buf, bytes,
++					    &tgt_file->f_pos);
++		if(tmp != bytes) {
++			printk(KERN_CRIT "mini_fo_cp_cont: ERROR writing.\n");
++			goto out_close_unset;
++		}
++	}
++
++	free_page((unsigned long) buf);
++	set_fs(old_fs);
++	fput(tgt_file);
++	fput(src_file);
++	goto out;
++
++ out_close_unset:
++	free_page((unsigned long) buf);
++	set_fs(old_fs);
++
++ out_close:
++	fput(tgt_file);
++	fput(src_file);
++
++ out_err:
++	dput(tgt_dentry);
++	dput(src_dentry);
++
++	/* mk: not sure if this need to be done */
++	mntput(tgt_mnt);
++	mntput(src_mnt);
++
++ out:
++	return err;
++}
++
++/* mk:
++ * ndl (no-duplicate list) stuff
++ * This is used in mini_fo_readdir, to save the storage directory contents
++ * and later when reading base, match them against the list in order
++ * to avoid duplicates.
++ */
++
++/* add a file specified by name and len to the ndl
++ * Return values: 0 on success, <0 on failure.
++ */
++int ndl_add_entry(struct readdir_data *rd, const char *name, int len)
++{
++	struct ndl_entry *tmp_entry;
++
++	tmp_entry = (struct ndl_entry *)
++		kmalloc(sizeof(struct ndl_entry), GFP_KERNEL);
++	if(!tmp_entry) {
++                printk(KERN_CRIT "mini_fo: ndl_add_entry: out of mem.\n");
++                return -ENOMEM;
++        }
++        tmp_entry->name = (char*) kmalloc(len, GFP_KERNEL);
++        if(!tmp_entry->name) {
++                printk(KERN_CRIT "mini_fo: ndl_add_entry: out of mem.\n");
++                return -ENOMEM;
++        }
++	strncpy(tmp_entry->name, name, len);
++        tmp_entry->len = len;
++
++        list_add(&tmp_entry->list, &rd->ndl_list);
++        rd->ndl_size++;
++        return 0;
++}
++
++/* delete all list entries and free memory */
++void ndl_put_list(struct readdir_data *rd)
++{
++	struct list_head *tmp;
++	struct ndl_entry *tmp_entry;
++
++	if(rd->ndl_size <= 0)
++		return;
++	while(!list_empty(&rd->ndl_list)) {
++		tmp = rd->ndl_list.next;
++                list_del(tmp);
++                tmp_entry = list_entry(tmp, struct ndl_entry, list);
++		kfree(tmp_entry->name);
++                kfree(tmp_entry);
++        }
++	rd->ndl_size = 0;
++}
++
++/* Check if a file specified by name and len is in the ndl
++ * Return value: 0 if not in list, 1 if file is found in ndl.
++ */
++int ndl_check_entry(struct readdir_data *rd, const char *name, int len)
++{
++	struct list_head *tmp;
++	struct ndl_entry *tmp_entry;
++
++	if(rd->ndl_size <= 0)
++		return 0;
++
++	list_for_each(tmp, &rd->ndl_list) {
++                tmp_entry = list_entry(tmp, struct ndl_entry, list);
++                if(tmp_entry->len != len)
++                        continue;
++                if(!strncmp(tmp_entry->name, name, len))
++                        return 1;
++        }
++        return 0;
++}
++
++/* mk:
++ * Recursive function to create corresponding directorys in the storage fs.
++ * The function will build the storage directorys up to dentry.
++ */
++int build_sto_structure(dentry_t *dir, dentry_t *dentry)
++{
++	int err;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++
++	if(dentry->d_parent != dir) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: invalid parameter or meta data corruption [1].\n");
++		return 1;
++	}
++
++       	if(dtost(dir) != MODIFIED) {
++		err = build_sto_structure(dir->d_parent, dentry->d_parent);
++		if(err)
++			return err;
++	}
++
++	/* ok, coming back again. */
++	check_mini_fo_dentry(dentry);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	if(!hidden_sto_dentry) {
++		/*
++		 * This is the case after creating the first
++		 * hidden_sto_dentry.
++		 * After one negative storage_dentry, all pointers to
++		 * hidden_storage dentries are set to NULL. We need to
++		 * create the negative dentry before we create the storage
++		 * file.
++		 */
++		unsigned int len;
++		const unsigned char *name;
++		len = dtohd(dentry)->d_name.len;
++		name = dtohd(dentry)->d_name.name;
++		hidden_sto_dentry = lookup_one_len(name, dtohd2(dir), len);
++		dtohd2(dentry) = hidden_sto_dentry;
++	}
++
++	/* was:	hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	/* lets be safe */
++	if(dtohd2(dir) != hidden_sto_dir_dentry) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: invalid parameter or meta data corruption [2].\n");
++		return 1;
++	}
++
++	/* check for errors in lock_parent */
++	err = PTR_ERR(hidden_sto_dir_dentry);
++	if(IS_ERR(hidden_sto_dir_dentry)) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: lock_parent failed.\n");
++		return err;
++	}
++
++	err = vfs_mkdir(hidden_sto_dir_dentry->d_inode,
++			hidden_sto_dentry,
++			dir->d_inode->i_mode);
++
++	if(err) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: failed to create storage dir [1].\n");
++		/* was: unlock_dir(dir); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&dir->d_inode->i_mutex);
++#else
++		up(&dir->d_inode->i_sem);
++#endif
++		dput(dir);
++		return err;
++	}
++
++	/* everything ok! */
++	if(!dtohd2(dentry)->d_inode) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: failed to create storage dir [2].\n");
++		/* was: unlock_dir(dir); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&dir->d_inode->i_mutex);
++#else
++		up(&dir->d_inode->i_sem);
++#endif
++		dput(dir);
++		return 1;
++	}
++
++	/* interpose the new inode and set new state */
++	itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++	dtopd(dentry)->state = MODIFIED;
++
++	/* initalize the wol list */
++	itopd(dentry->d_inode)->deleted_list_size = -1;
++	itopd(dentry->d_inode)->renamed_list_size = -1;
++	meta_build_lists(dentry);
++
++	fist_copy_attr_all(dentry->d_inode, itohi2(dentry->d_inode));
++	fist_copy_attr_timesizes(dir->d_inode,
++				 hidden_sto_dir_dentry->d_inode);
++	dir->d_inode->i_nlink++;
++	/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++	return 0;
++}
++
++
++#if 0 /* unused */
++
++/*
++ * Read "len" bytes from "filename" into "buf".
++ * "buf" is in kernel space.
++ */
++int
++mini_fo_read_file(const char *filename, void *buf, int len)
++{
++    file_t *filp;
++    mm_segment_t oldfs;
++    int bytes;
++    /* Chroot? Maybe NULL isn't right here */
++    filp = filp_open(filename, O_RDONLY, 0);
++    if (!filp || IS_ERR(filp)) {
++	printk("mini_fo_read_file err %d\n", (int) PTR_ERR(filp));
++	return -1;  /* or do something else */
++    }
++
++    if (!filp->f_op->read)
++	return -2;  /* file(system) doesn't allow reads */
++
++    /* now read len bytes from offset 0 */
++    filp->f_pos = 0;		/* start offset */
++    oldfs = get_fs();
++    set_fs(KERNEL_DS);
++    bytes = filp->f_op->read(filp, buf, len, &filp->f_pos);
++    set_fs(oldfs);
++
++    /* close the file */
++    fput(filp);
++
++    return bytes;
++}
++
++
++
++/*
++ * Write "len" bytes from "buf" to "filename"
++ * "buf" is in kernel space.
++ */
++int
++mini_fo_write_file(const char *filename, void *buf, int len)
++{
++    file_t *filp;
++    mm_segment_t oldfs;
++    int bytes;
++				/* Chroot? Maybe NULL isn't right here */
++    filp = filp_open(filename, O_RDWR|O_CREAT, 0640);
++    if (!filp || IS_ERR(filp)) {
++	printk("mini_fo_write_file err %d\n", (int) PTR_ERR(filp));
++	return -1;  /* or do something else */
++    }
++
++    if (!filp->f_op->write)
++	return -2;  /* file(system) doesn't allow writes */
++
++    /* now write len bytes from offset 0 */
++    filp->f_pos = 0;		/* start offset */
++    oldfs = get_fs();
++    set_fs(KERNEL_DS);
++    bytes = filp->f_op->write(filp, buf, len, &filp->f_pos);
++    set_fs(oldfs);
++
++    /* close the file */
++    fput(filp);
++
++    return bytes;
++}
++
++#endif /* unused */
++
+--- /dev/null
++++ b/fs/mini_fo/ChangeLog
+@@ -0,0 +1,281 @@
++2006-01-24  Markus Klotzbuecher  <mk@mary.denx.de>
++
++	* Add tons of ugly ifdefs to Ed L. Cashin's mutex patch to
++          retain backwards compatibility.
++
++2006-01-24  Ed L. Cashin <ecashin@coraid.com>
++
++	* Support for the new mutex infrastructure
++	(7892f2f48d165a34b0b8130c8a195dfd807b8cb6)
++
++2005-10-15  Markus Klotzbuecher  <mk@localhost.localdomain>
++
++	* Bugfix for a serious memory leak in mini_fo_follow_link.
++
++2005-09-21  Markus Klotzbuecher  <mk@mary>
++
++	* new release 0.6.1
++
++	* fix of a compiler warning due to changes in 2.6.13
++
++2005-09-21  Klaus Wenninger  <klaus.wenninger@siemens.com>
++
++	* file.c: readdir: fix for a bug that caused directory entries
++          to show up twice when using storage filesystems such as
++          minixfs or pramfs.
++
++2005-06-30  Eric Lammerts <eric@lammerts.org>
++
++	* fix for an oops when overwriting a binary thats beeing
++          executed.
++
++2005-06-09    <mk@mary>
++
++	* Renamed overlay to mini_fo-overlay.
++
++	* Added mini_fo-merge script to allow merging of storage and base
++	after making modifications.
++
++2005-05-22  root  <mk@mary>
++
++	* Added overlay script that allows to easily mount mini_fo ontop
++	of a given base directory
++
++2005-05-10    <mk@mary>
++
++	* inode.c: xattr functions return -EOPNOSUPP instead of
++          -ENOSUPP, what confuses "ls -l"
++
++	* Changed license from LGPL to GPL.
++
++2005-05-08  root  <mk@mary>
++
++	* Makefile: clean it up and added make install and make
++          uninstall.
++
++2005-05-06    <mk@mary>
++
++	* merged devel branch back to main. [v0-6-0-pre3]
++
++	* removed unused files print.c and fist_ioctl. [devel-0-0-18]
++
++	* ioctl: removed fist_ioctl stuff, that is not needed for
++          now.
++
++2005-05-03    <mk@mary>
++
++	* file.c: simplified mini_fo_open and mini_fo_setattr using
++          new state changing functions. [devel-0-0-17]
++
++	* inode.c: Fixed getattr state bug (see below) in 2.4 function
++          mini_fo_inode revalidate.
++
++	* inode.c: found an other bug in mini_fo_getattr. States are not
++	  reliable in this function, as a file can be opened, unlinked and
++	  the getattr function called. This results in a deleted dentry
++	  with an inode. Fix is to ignore states and simply use the inode
++	  available.
++
++2005-04-29    <mk@mary>
++
++	* file.c: Bugfix and cleanup in fasync and fsync. [devel-0-0-16]
++
++	* file.c: do not use mini_fo_lock so the generic version is
++          used (I guess).
++
++	* inode.c: getattr, never call getattr on lower files, as this
++          will cause the inum to change.
++
++	* inode.c: rename_reg_file renamed to rename_nondir, as it
++          doesn't matter as long it't not a dir. Removed all
++          rename_dev_file etc.
++
++	* tagged as devel-0-0-15
++
++	* inode.c: added support for chosing support for extended
++          attrs at compile time by XATTR define in mini_fo.h .
++
++	* inode.c: fixed mini_fo_getattr to use mini_fo inode and not
++          lower again, what avoids inode number changes that confused
++          rm again. This is the proper solution.
++
++2005-04-24    <mk@mary>
++
++	* all files: updated Copyright notive to 2005. [devel-0-0-14]
++
++	* inode.c: fixed mini_fo_getattr to not change the inode
++          number, even if lower files change.
++
++	* super.c: fixed a bug that caused deleted base file to show
++          up suddenly after some time, or after creating a special
++          file. The problem was that after some time or after special
++          file creating sync_sb_inodes is called by the vfs, that
++          called our mini_fo_put_inode. There was (wrongly) called
++          __meta_put_lists, that nuked the lists, although the inode
++          was going to continue its life. Moving __meta_put_lists to
++          mini_fo_clear_inode, where an inode is really destroyed,
++          solved the problem.
++
++
++2005-04-23    <mk@mary>
++
++	* state.c, aux.c: more cleaning up and
++          simplifications. [devel-0-0-13]
++
++	* inode.c: implemented mini_fo_getattr, that was required for
++          2.6 because inode_revalidate has been remove there, and the
++	  old "du" bug returned.
++
++
++2005-04-20    <mk@mary>
++
++	* aux.c: get_neg_sto_dentry(): allow to be called for dentries
++          in state UNMODIFIED, NON_EXISTANT _and_ DELETED.
++
++2005-04-19    <mk@mary>
++
++	* Fixed a bug under 2.6 that caused files deleted via mini_fo
++          not to be deleted properly and therefore the fs filled up
++          untill no memory was left. [devel-0-0-12]
++
++	* Added basic hard link support. This means that creating
++          hardlinks will work, but existing ones will be treated as
++          individual files. [devel-0-0-11]
++
++2005-04-17    <mk@mary>
++
++	* Bugfixes
++
++2005-04-13  root  <mk@mary>
++
++	* Added file state.c for the state transition
++          functions. Doesn't work very well yet, though...
++
++2005-04-12    <mk@mary>
++
++	* Porting to 2.6 started, which is easier than expected, also
++          due to Olivier previous work.
++
++2005-04-08    <mk@mary>
++
++	* Fixed the bug that caused du to return invalid sizes of
++          directory trees. The problem was that
++          mini_fo_inode_revalidate didn't always copy the attributes
++          from the base inode properly.
++
++2005-04-01  Markus Klotzbuecher  <mk@chasey>
++
++	* Merged devel branch back to main trunk and updated the
++          RELEASE notes. This will be 0-6-0-pre1.
++
++2005-03-31  Markus Klotzbuecher  <mk@chasey>
++
++	* Fixed some bugs in rename_reg_file, that only showed up in
++          the kernel compile test. Kernel compiles cleanly ontop of
++          mini_fo, now also make mrproper etc. work. Seems pretty stable.
++
++2005-03-28  Markus Klotzbuecher  <mk@chasey>
++
++	* Many, many directory renaming bugfixes and a lot of other
++          cleanup. Dir renaming seems to work relatively stable.
++
++2005-03-22  Markus Klotzbuecher  <mk@chasey>
++
++	* Finished implementing lightweight directory renaming. Some
++          basic testing indicates it works fine.
++	  Next is to implement testcases for the testsuite and confirm
++          everything is really working ok.
++
++2005-03-18  Markus Klotzbuecher  <mk@chasey>
++
++	* Finished implementing meta.c stuff required for directory
++          renaming.
++
++2005-03-17  Markus Klotzbuecher  <mk@chasey>
++
++	* Fixed all compile warnings + an extremly old bug that
++          somehow crept in while reworking the wol stuff to the META
++          system. Turning on -Werror again... :-)
++
++	* Fixed some bugs in the new rename_reg_file function.
++
++	* Rewrote mini_fo rename and split it into several
++          subfunctions, that handle the different types
++          seperately. Rewrote the regular file function aswell, as it
++          was implemented somewhat inefficient.
++
++2005-03-16  Markus Klotzbuecher  <mk@chasey>
++
++	* Implemented new META subsystem, removed old WOL stuff in favor
++	  if it.
++
++	* After some basic testing everything seems ok...
++
++2005-03-11  Markus Klotzbuecher  <mk@chasey>
++
++	* Renaming a non regular file caused trouble because I always
++	  tried to copy the contents. Now I only do this for regular
++	  files. mini_fo_rename still isn't implemented properly, renaming
++	  of device files, symlinks etc. results in a empty regular file
++	  instead of the proper type.
++
++	* Directory renaming suddenly works! What a surprise! I guess
++          this is because renaming is implemented as making a copy and
++          removing the original. Still this might not work
++          everywhere...
++
++2005-03-09  Markus Klotzbuecher  <mk@chasey>
++
++	* Bugfix, when a mini_fo directory that exists in storage
++  	  (state: MODIFIED, CREATED and DEL_REWRITTEN) is deleted, a
++  	  possibly existing WOL file contained in it needs to be
++  	  deleted too.
++
++	* Starting cleanup: defined state names in order to get rid of
++          the state numbers.
++
++2005-03-08  Markus Klotzbuecher  <mk@chasey>
++
++	* Makefile fix, fist_ioctl was built against wrong sources if ARCH=um
++
++	* Fixed a bug in dentry.c, mini_fo_d_hash. In state 4 =
++          DEL_REWRITTEN the hash was calculated from the base dentry,
++          which was wrong and and caused assertions in
++          __mini_fo_hidden_dentry to fail.
++
++2005-02-21    <mk@mary>
++
++	* Implemented directory deleting (inode.c)
++
++	* main.c: made mini_fo_parse_options a little more robust.
++
++2004-12-22    <mk@mary>
++
++	* Makefile cleanup and uml stuff, removed unneccessary files
++
++	* Created a new and hopefully more informative README
++
++	* CHANGELOG: created a new CHANGELOG and added old entries reversely
++
++
++2004-10-24 Gleb Natapov <gleb@nbase.co.il>
++
++	* Fix: owner and group where not correctly copied from base to
++          storage.
++
++
++2004-10-05 Gleb Natapov <gleb@nbase.co.il>
++
++	* Implementation of fsync, fasync and lock mini_fo functions.
++
++
++2004-09-29 Bob Lee <bob@pantasys.com>
++
++	* Fix of a serious pointer bug
++
++
++2004-09-28 Gleb Natapov <gleb@nbase.co.il>
++
++	* Implementation of mini_fo_mknod and mini_fo_rename, support
++          for device files.
++
+--- /dev/null
++++ b/fs/mini_fo/dentry.c
+@@ -0,0 +1,244 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++
++/*
++ * THIS IS A BOOLEAN FUNCTION: returns 1 if valid, 0 otherwise.
++ */
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_d_revalidate(dentry_t *dentry, struct nameidata *nd)
++#else
++mini_fo_d_revalidate(dentry_t *dentry, int flags)
++#endif
++{
++	int err1 = 1; /* valid = 1, invalid = 0 */
++	int err2 = 1;
++	dentry_t *hidden_dentry;
++	dentry_t *hidden_sto_dentry;
++
++
++	check_mini_fo_dentry(dentry);
++
++	hidden_dentry  = dtohd(dentry);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	if(hidden_dentry &&
++	   hidden_dentry->d_op &&
++	   hidden_dentry->d_op->d_revalidate) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		err1 = hidden_dentry->d_op->d_revalidate(hidden_dentry, nd);
++#else
++		err1 = hidden_dentry->d_op->d_revalidate(hidden_dentry, flags);
++#endif
++	}
++	if(hidden_sto_dentry &&
++	   hidden_sto_dentry->d_op &&
++	   hidden_sto_dentry->d_op->d_revalidate) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		err2 = hidden_sto_dentry->d_op->d_revalidate(hidden_sto_dentry,
++							     nd);
++#else
++		err2 = hidden_sto_dentry->d_op->d_revalidate(hidden_sto_dentry,
++							     flags);
++#endif
++	}
++
++	/* mk: if one of the lower level dentries are valid,
++	 * the mini_fo dentry is too.
++	 */
++	return (err1 || err2);
++}
++
++
++STATIC int
++mini_fo_d_hash(dentry_t *dentry, qstr_t *name)
++{
++	int err = 0;
++	dentry_t *hidden_dentry;
++	dentry_t *hidden_sto_dentry;
++
++	/* hidden_dentry = mini_fo_hidden_dentry(dentry);
++	 * hidden_sto_dentry = mini_fo_hidden_sto_dentry(dentry); */
++
++	/* state 1, 3, 4, 5: build the hash for the storage dentry */
++	if((dtopd(dentry)->state == MODIFIED) ||
++	   (dtopd(dentry)->state == CREATED) ||
++	   (dtopd(dentry)->state == DEL_REWRITTEN) ||
++	   (dtopd(dentry)->state == DELETED)) {
++		hidden_sto_dentry = dtohd2(dentry);
++		if(hidden_sto_dentry &&
++		   hidden_sto_dentry->d_op &&
++		   hidden_sto_dentry->d_op->d_hash) {
++			err = hidden_sto_dentry->d_op->d_hash(hidden_sto_dentry, name);
++		}
++		goto out;
++	}
++	/* state 2: build the hash for the base dentry */
++	if(dtopd(dentry)->state == UNMODIFIED) {
++		hidden_dentry = dtohd(dentry);
++		if(hidden_dentry &&
++		   hidden_dentry->d_op &&
++		   hidden_dentry->d_op->d_hash) {
++			err = hidden_dentry->d_op->d_hash(hidden_dentry, name);
++		}
++		goto out;
++	}
++	/* state 6: build hash for the dentry that exists */
++	if(dtopd(dentry)->state == NON_EXISTANT) {
++		hidden_sto_dentry = dtohd2(dentry);
++		if(hidden_sto_dentry &&
++		   hidden_sto_dentry->d_op &&
++		   hidden_sto_dentry->d_op->d_hash) {
++			err = hidden_sto_dentry->d_op->d_hash(hidden_sto_dentry, name);
++			goto out;
++		}
++		hidden_dentry = dtohd(dentry);
++		if(hidden_dentry &&
++		   hidden_dentry->d_op &&
++		   hidden_dentry->d_op->d_hash) {
++			err = hidden_dentry->d_op->d_hash(hidden_dentry, name);
++			goto out;
++		}
++	}
++
++	printk(KERN_CRIT "mini_fo: d_hash: invalid state detected.\n");
++
++ out:
++	return err;
++}
++
++
++STATIC int
++mini_fo_d_compare(dentry_t *dentry, qstr_t *a, qstr_t *b)
++{
++	int err;
++	dentry_t *hidden_dentry=NULL;
++
++	/* hidden_dentry = mini_fo_hidden_dentry(dentry); */
++	if(dtohd2(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else if(dtohd(dentry))
++		hidden_dentry = dtohd(dentry);
++
++	if (hidden_dentry && hidden_dentry->d_op && hidden_dentry->d_op->d_compare) {
++		err = hidden_dentry->d_op->d_compare(hidden_dentry, a, b);
++	} else {
++		err = ((a->len != b->len) || memcmp(a->name, b->name, b->len));
++	}
++
++	return err;
++}
++
++
++int
++mini_fo_d_delete(dentry_t *dentry)
++{
++	dentry_t *hidden_dentry;
++	dentry_t *hidden_sto_dentry;
++	int err = 0;
++
++	/* this could be a negative dentry, so check first */
++	if (!dtopd(dentry)) {
++		printk(KERN_CRIT "mini_fo_d_delete: negative dentry passed.\n");
++		goto out;
++	}
++	hidden_dentry = dtohd(dentry);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	if(hidden_dentry) {
++		if(hidden_dentry->d_op &&
++		   hidden_dentry->d_op->d_delete) {
++			err = hidden_dentry->d_op->d_delete(hidden_dentry);
++		}
++	}
++	if(hidden_sto_dentry) {
++		if(hidden_sto_dentry->d_op &&
++		   hidden_sto_dentry->d_op->d_delete) {
++			err = hidden_sto_dentry->d_op->d_delete(hidden_sto_dentry);
++		}
++	}
++
++ out:
++	return err;
++}
++
++
++void
++mini_fo_d_release(dentry_t *dentry)
++{
++	dentry_t *hidden_dentry;
++	dentry_t *hidden_sto_dentry;
++
++
++	/* this could be a negative dentry, so check first */
++	if (!dtopd(dentry)) {
++		printk(KERN_CRIT "mini_fo_d_release: no private data.\n");
++		goto out;
++	}
++	hidden_dentry = dtohd(dentry);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	if(hidden_dentry) {
++		/* decrement hidden dentry's counter and free its inode */
++		dput(hidden_dentry);
++	}
++	if(hidden_sto_dentry) {
++                /* decrement hidden dentry's counter and free its inode */
++		dput(hidden_sto_dentry);
++	}
++
++	/* free private data (mini_fo_dentry_info) here */
++	kfree(dtopd(dentry));
++	__dtopd(dentry) = NULL;	/* just to be safe */
++ out:
++	return;
++}
++
++
++/*
++ * we don't really need mini_fo_d_iput, because dentry_iput will call iput() if
++ * mini_fo_d_iput is not defined. We left this implemented for ease of
++ * tracing/debugging.
++ */
++void
++mini_fo_d_iput(dentry_t *dentry, inode_t *inode)
++{
++	iput(inode);
++}
++
++
++struct dentry_operations mini_fo_dops = {
++	d_revalidate:	mini_fo_d_revalidate,
++	d_hash:		mini_fo_d_hash,
++	d_compare:		mini_fo_d_compare,
++	d_release:		mini_fo_d_release,
++	d_delete:		mini_fo_d_delete,
++	d_iput:		mini_fo_d_iput,
++};
+--- /dev/null
++++ b/fs/mini_fo/file.c
+@@ -0,0 +1,713 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++#define ROUND_UP(x) (((x)+sizeof(long)-1) & ~(sizeof(long)-1))
++
++/*******************
++ * File Operations *
++ *******************/
++
++STATIC loff_t
++mini_fo_llseek(file_t *file, loff_t offset, int origin)
++{
++	loff_t err;
++	file_t *hidden_file = NULL;
++
++	if(S_ISDIR(file->f_dentry->d_inode->i_mode)) {
++		/* Check if trying to llseek from a directory */
++		err = -EISDIR;
++		goto out;
++	}
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			hidden_file = ftohf(file);
++		}
++	}
++
++	/* always set hidden position to this one */
++	hidden_file->f_pos = file->f_pos;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	memcpy(&(hidden_file->f_ra),
++	       &(file->f_ra),
++	       sizeof(struct file_ra_state));
++#else
++	if (file->f_reada) { /* update readahead information if needed */
++		hidden_file->f_reada = file->f_reada;
++		hidden_file->f_ramax = file->f_ramax;
++		hidden_file->f_raend = file->f_raend;
++		hidden_file->f_ralen = file->f_ralen;
++		hidden_file->f_rawin = file->f_rawin;
++	}
++#endif
++	if (hidden_file->f_op && hidden_file->f_op->llseek)
++		err = hidden_file->f_op->llseek(hidden_file, offset, origin);
++	else
++		err = generic_file_llseek(hidden_file, offset, origin);
++
++	if (err < 0)
++		goto out;
++
++	if (err != file->f_pos) {
++		file->f_pos = err;
++		// ION maybe this?
++		// 	file->f_pos = hidden_file->f_pos;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++		file->f_reada = 0;
++#endif
++		file->f_version++;
++	}
++
++ out:
++	return err;
++}
++
++
++/* mk: fanout capable */
++STATIC ssize_t
++mini_fo_read(file_t *file, char *buf, size_t count, loff_t *ppos)
++{
++	int err = -EINVAL;
++	file_t *hidden_file = NULL;
++	loff_t pos = *ppos;
++
++	if(S_ISDIR(file->f_dentry->d_inode->i_mode)) {
++		/* Check if trying to read from a directory */
++		/* printk(KERN_CRIT "mini_fo_read: ERROR: trying to read data from a directory.\n"); */
++		err = -EISDIR;
++		goto out;
++	}
++
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			hidden_file = ftohf(file);
++		}
++	}
++
++	if (!hidden_file->f_op || !hidden_file->f_op->read)
++		goto out;
++
++	err = hidden_file->f_op->read(hidden_file, buf, count, &pos);
++	*ppos = pos;
++
++	if (err >= 0) {
++		/* atime should also be updated for reads of size zero or more */
++		fist_copy_attr_atime(file->f_dentry->d_inode,
++				     hidden_file->f_dentry->d_inode);
++	}
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	/*
++	 * MAJOR HACK
++	 * because pread() does not have any way to tell us that it is
++	 * our caller, then we don't know for sure if we have to update
++	 * the file positions.  This hack relies on read() having passed us
++	 * the "real" pointer of its struct file's f_pos field.
++	 */
++	if (ppos == &file->f_pos)
++		hidden_file->f_pos = *ppos = pos;
++	if (hidden_file->f_reada) { /* update readahead information if needed */
++		file->f_reada = hidden_file->f_reada;
++		file->f_ramax = hidden_file->f_ramax;
++		file->f_raend = hidden_file->f_raend;
++		file->f_ralen = hidden_file->f_ralen;
++		file->f_rawin = hidden_file->f_rawin;
++	}
++#else
++	memcpy(&(file->f_ra),&(hidden_file->f_ra),sizeof(struct file_ra_state));
++#endif
++
++ out:
++	return err;
++}
++
++
++/* this mini_fo_write() does not modify data pages! */
++STATIC ssize_t
++mini_fo_write(file_t *file, const char *buf, size_t count, loff_t *ppos)
++{
++	int err = -EINVAL;
++	file_t *hidden_file = NULL;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	loff_t pos = *ppos;
++
++	/* mk: fan out: */
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			/* This is bad! We have no storage file to write to. This
++			 * should never happen because if a file is opened for
++			 * writing, a copy should have been made earlier.
++			 */
++			printk(KERN_CRIT "mini_fo: write : ERROR, no storage file to write.\n");
++			err = -EINVAL;
++			goto out;
++		}
++	}
++
++	inode = file->f_dentry->d_inode;
++	hidden_inode = itohi2(inode);
++	if(!hidden_inode) {
++		printk(KERN_CRIT "mini_fo: write: no sto inode found, not good.\n");
++		goto out;
++	}
++
++	if (!hidden_file->f_op || !hidden_file->f_op->write)
++		goto out;
++
++	/* adjust for append -- seek to the end of the file */
++	if (file->f_flags & O_APPEND)
++		pos = inode->i_size;
++
++	err = hidden_file->f_op->write(hidden_file, buf, count, &pos);
++
++	/*
++	 * copy ctime and mtime from lower layer attributes
++	 * atime is unchanged for both layers
++	 */
++	if (err >= 0)
++		fist_copy_attr_times(inode, hidden_inode);
++
++	*ppos = pos;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	/*
++	 * XXX: MAJOR HACK
++	 *
++	 * because pwrite() does not have any way to tell us that it is
++	 * our caller, then we don't know for sure if we have to update
++	 * the file positions.  This hack relies on write() having passed us
++	 * the "real" pointer of its struct file's f_pos field.
++	 */
++	if (ppos == &file->f_pos)
++		hidden_file->f_pos = *ppos = pos;
++#endif
++	/* update this inode's size */
++	if (pos > inode->i_size)
++		inode->i_size = pos;
++
++ out:
++	return err;
++}
++
++/* Global variable to hold a file_t pointer.
++ * This serves to allow mini_fo_filldir function to know which file is
++ * beeing read, which is required for two reasons:
++ *
++ *   - be able to call wol functions in order to avoid listing deleted
++ *     base files.
++ *   - if we're reading a directory which is in state 1, we need to
++ *     maintain a list (in mini_fo_filldir) of which files allready
++ *     have been copied to userspace,to detect files existing in base
++ *     and storage and not list them twice.
++ */
++filldir_t mini_fo_filldir_orig;
++file_t *mini_fo_filldir_file;
++
++/* mainly copied from fs/readdir.c */
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++mini_fo_filldir(void * __buf, const char * name, int namlen, loff_t offset,
++		  u64 ino, unsigned int d_type)
++#else
++mini_fo_filldir(void * __buf, const char * name, int namlen, loff_t offset,
++		  ino_t ino, unsigned int d_type)
++#endif
++{
++	struct getdents_callback * buf = (struct getdents_callback *) __buf;
++	file_t* file = mini_fo_filldir_file;
++
++	/* In theses states we filter meta files in storage (WOL) */
++	if(file && (dtopd(file->f_dentry)->state == MODIFIED ||
++		    dtopd(file->f_dentry)->state == CREATED ||
++		    dtopd(file->f_dentry)->state == DEL_REWRITTEN)) {
++
++		int tmp = strlen(META_FILENAME);
++		if(tmp  == namlen) {
++			if(!strncmp(name, META_FILENAME, namlen))
++				return 0;
++		}
++	}
++
++	/* check if we are merging the contents of storage and base */
++	if(file && dtopd(file->f_dentry)->state == MODIFIED) {
++		/* check if we are still reading storage contents, if
++		 * yes, we just save the name of the file for duplicate
++		 * checking later. */
++
++		if(!ftopd(file)->rd.sto_done) {
++			/* put file into ndl list */
++			if(ndl_add_entry(&ftopd(file)->rd, name, namlen))
++				printk(KERN_CRIT "mini_fo_filldir: Error adding to ndl.\n");
++		} else {
++			/* check if file has been deleted */
++			if(meta_check_d_entry(file->f_dentry, name, namlen))
++				return 0;
++
++			/* do duplicate checking */
++			if(ndl_check_entry(&ftopd(file)->rd, name, namlen))
++				return 0;
++		}
++	}
++
++	return mini_fo_filldir_orig(buf, name, namlen, offset, ino, d_type);
++}
++
++
++STATIC int
++mini_fo_readdir(file_t *file, void *dirent, filldir_t filldir)
++{
++	int err = 0;/* mk: ??? -ENOTDIR; */
++	file_t *hidden_file = NULL;
++	file_t *hidden_sto_file = NULL;
++	inode_t *inode;
++	struct getdents_callback *buf;
++	int oldcount;
++
++#if defined(FIST_FILTER_NAME) || defined(FIST_FILTER_SCA)
++	struct mini_fo_getdents_callback buf;
++#endif /* FIST_FILTER_NAME || FIST_FILTER_SCA */
++
++	buf = (struct getdents_callback *) dirent;
++	oldcount = buf->count;
++	inode = file->f_dentry->d_inode;
++	mini_fo_filldir_file = file;
++	mini_fo_filldir_orig = filldir;
++
++	ftopd(file)->rd.sto_done = 0;
++	do {
++		if (ftopd(file) != NULL) {
++			if(ftohf2(file)) {
++				hidden_sto_file = ftohf2(file);
++				err = vfs_readdir(hidden_sto_file, mini_fo_filldir, dirent);
++				file->f_pos = hidden_sto_file->f_pos;
++				if (err > 0)
++					fist_copy_attr_atime(inode, hidden_sto_file->f_dentry->d_inode);
++				/* not finshed yet, we'll be called again */
++				if (buf->count != oldcount)
++					break;
++			}
++
++			ftopd(file)->rd.sto_done = 1;
++
++			if(ftohf(file)) {
++				hidden_file = ftohf(file);
++				err = vfs_readdir(hidden_file, mini_fo_filldir, dirent);
++				file->f_pos = hidden_file->f_pos;
++				if (err > 0)
++					fist_copy_attr_atime(inode, hidden_file->f_dentry->d_inode);
++			}
++
++		}
++	} while (0);
++
++	/* mk:
++	 * we need to check if all the directory data has been copied to userspace,
++	 * or if we will be called again by userspace to complete the operation.
++	 */
++	if(buf->count == oldcount) {
++		ndl_put_list(&ftopd(file)->rd);
++	}
++
++	/* unset this, safe */
++	mini_fo_filldir_file = NULL;
++	return err;
++}
++
++
++STATIC unsigned int
++mini_fo_poll(file_t *file, poll_table *wait)
++{
++	unsigned int mask = DEFAULT_POLLMASK;
++	file_t *hidden_file = NULL;
++
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			hidden_file = ftohf(file);
++		}
++	}
++
++	if (!hidden_file->f_op || !hidden_file->f_op->poll)
++		goto out;
++
++	mask = hidden_file->f_op->poll(hidden_file, wait);
++
++ out:
++	return mask;
++}
++
++/* FIST-LITE special version of mmap */
++STATIC int
++mini_fo_mmap(file_t *file, vm_area_t *vma)
++{
++	int err = 0;
++	file_t *hidden_file = NULL;
++
++	/* fanout capability */
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			hidden_file = ftohf(file);
++		}
++	}
++
++	ASSERT(hidden_file != NULL);
++	ASSERT(hidden_file->f_op != NULL);
++	ASSERT(hidden_file->f_op->mmap != NULL);
++
++	vma->vm_file = hidden_file;
++	err = hidden_file->f_op->mmap(hidden_file, vma);
++	get_file(hidden_file); /* make sure it doesn't get freed on us */
++	fput(file);	       /* no need to keep extra ref on ours */
++
++	return err;
++}
++
++
++
++STATIC int
++mini_fo_open(inode_t *inode, file_t *file)
++{
++	int err = 0;
++ 	int hidden_flags;
++	file_t *hidden_file = NULL;
++	dentry_t *hidden_dentry = NULL;
++
++	/* fanout stuff */
++	file_t *hidden_sto_file = NULL;
++	dentry_t *hidden_sto_dentry = NULL;
++
++	__ftopd(file) =
++		kmalloc(sizeof(struct mini_fo_file_info), GFP_KERNEL);
++	if (!ftopd(file)) {
++		err = -ENOMEM;
++		goto out;
++	}
++
++	/* init the readdir_helper structure */
++	INIT_LIST_HEAD(&ftopd(file)->rd.ndl_list);
++	ftopd(file)->rd.ndl_size = 0;
++
++	/* In certain paths this could stay uninitalized and cause trouble */
++	ftohf(file) = NULL;
++	ftohf2(file) = NULL;
++	hidden_flags = file->f_flags;
++
++	/* create storage files? */
++	if(dtost(file->f_dentry) == UNMODIFIED) {
++		if(!IS_WRITE_FLAG(file->f_flags)) {
++			hidden_dentry = dtohd(file->f_dentry);
++			dget(hidden_dentry);
++			/* dentry_open will decrement mnt refcnt if err.
++			 * otherwise fput() will do an mntput() for us upon file close. */
++			mntget(stopd(inode->i_sb)->hidden_mnt);
++			hidden_file = dentry_open(hidden_dentry,
++						  stopd(inode->i_sb)->hidden_mnt,
++						  hidden_flags);
++			if (IS_ERR(hidden_file)) {
++				err = PTR_ERR(hidden_file);
++				dput(hidden_dentry);
++				goto out;
++			}
++			ftohf(file) = hidden_file;	/* link two files */
++			goto out;
++		}
++		else {
++			if(S_ISDIR(file->f_dentry->d_inode->i_mode)) {
++				err = dir_unmod_to_mod(file->f_dentry);
++			} else
++				err = nondir_unmod_to_mod(file->f_dentry, 1);
++
++			if (err) {
++				printk("mini_fo_open: ERROR creating storage file.\n");
++				goto out;
++			}
++		}
++	}
++	hidden_sto_dentry = dtohd2(file->f_dentry);
++	dget(hidden_sto_dentry);
++
++	if(dtopd(file->f_dentry)->state == MODIFIED) {
++		/* Directorys are special, interpose on both lower level files */
++		if(S_ISDIR(itohi(inode)->i_mode)) {
++			/* check for invalid file types of lower level files */
++			if(!(S_ISDIR(itohi(inode)->i_mode) && S_ISDIR(itohi2(inode)->i_mode))) {
++				printk(KERN_CRIT "mini_fo_open: meta data corruption detected.\n");
++				dput(hidden_sto_dentry);
++				err = -EINVAL;
++				goto out;
++			}
++
++			/* lower level directorys are ok, open the base file */
++			hidden_dentry = dtohd(file->f_dentry);
++			dget(hidden_dentry);
++
++			mntget(stopd(inode->i_sb)->hidden_mnt);
++			hidden_file = dentry_open(hidden_dentry,
++						  stopd(inode->i_sb)->hidden_mnt,
++						  hidden_flags);
++			if (IS_ERR(hidden_file)) {
++				err = PTR_ERR(hidden_file);
++				dput(hidden_dentry);
++				dput(hidden_sto_dentry);
++				goto out;
++			}
++			ftohf(file) = hidden_file; /* link the two files */
++		}
++	}
++
++	if(!exists_in_storage(file->f_dentry)) {
++		printk(KERN_CRIT "mini_fo_open: invalid file state detected.\n");
++		err = -EINVAL;
++		dput(hidden_sto_dentry);
++
++		/* If the base file has been opened, we need to close it here */
++		if(ftohf(file)) {
++			if (hidden_file->f_op && hidden_file->f_op->flush)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++				hidden_file->f_op->flush(hidden_file, NULL);
++#else
++				hidden_file->f_op->flush(hidden_file);
++#endif
++			dput(hidden_dentry);
++		}
++		goto out;
++	}
++
++	/* ok, now we can safely open the storage file */
++	mntget(stopd(inode->i_sb)->hidden_mnt2);
++	hidden_sto_file = dentry_open(hidden_sto_dentry,
++				      stopd(inode->i_sb)->hidden_mnt2,
++				      hidden_flags);
++
++	/* dentry_open dputs the dentry if it fails */
++	if (IS_ERR(hidden_sto_file)) {
++		err = PTR_ERR(hidden_sto_file);
++		/* close base file if open */
++		if(ftohf(file)) {
++			if (hidden_file->f_op && hidden_file->f_op->flush)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++				hidden_file->f_op->flush(hidden_file, NULL);
++#else
++				hidden_file->f_op->flush(hidden_file);
++#endif
++			dput(hidden_dentry);
++		}
++		goto out;
++	}
++	ftohf2(file) = hidden_sto_file; /* link storage file */
++
++ out:
++	if (err < 0 && ftopd(file)) {
++		kfree(ftopd(file));
++	}
++	return err;
++}
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++mini_fo_flush(file_t *file, fl_owner_t id)
++#else
++mini_fo_flush(file_t *file)
++#endif
++{
++	int err1 = 0;		/* assume ok (see open.c:close_fp) */
++	int err2 = 0;
++	file_t *hidden_file = NULL;
++
++	check_mini_fo_file(file);
++
++	/* mk: we don't do any state checking here, as its not worth the time.
++	 * Just flush the lower level files if they exist.
++	 */
++	if(ftopd(file) != NULL) {
++		if(ftohf(file) != NULL) {
++			hidden_file = ftohf(file);
++			if (hidden_file->f_op && hidden_file->f_op->flush)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++				err1 = hidden_file->f_op->flush(hidden_file, id);
++#else
++				err1 = hidden_file->f_op->flush(hidden_file);
++#endif
++		}
++		if(ftohf2(file) != NULL) {
++			hidden_file = ftohf2(file);
++			if (hidden_file->f_op && hidden_file->f_op->flush)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++				err2 = hidden_file->f_op->flush(hidden_file, id);
++#else
++				err2 = hidden_file->f_op->flush(hidden_file);
++#endif
++		}
++	}
++	return (err1 | err2);
++}
++
++
++STATIC int
++mini_fo_release(inode_t *inode, file_t *file)
++{
++	int err = 0;
++	file_t *hidden_file = NULL;
++
++	if (ftopd(file) != NULL) {
++		if(ftohf(file)) {
++			hidden_file = ftohf(file);
++			fput(hidden_file);
++		}
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++			fput(hidden_file);
++		}
++		kfree(ftopd(file));
++	}
++	return err;
++}
++
++STATIC int
++mini_fo_fsync(file_t *file, dentry_t *dentry, int datasync)
++{
++	int err1 = 0;
++	int err2 = 0;
++	file_t *hidden_file = NULL;
++	dentry_t *hidden_dentry;
++
++	check_mini_fo_file(file);
++
++	if ((hidden_file = ftohf(file)) != NULL) {
++		hidden_dentry = dtohd(dentry);
++		if (hidden_file->f_op && hidden_file->f_op->fsync) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++			mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++			down(&hidden_dentry->d_inode->i_sem);
++#endif
++			err1 = hidden_file->f_op->fsync(hidden_file, hidden_dentry, datasync);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++			mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++			up(&hidden_dentry->d_inode->i_sem);
++#endif
++		}
++	}
++
++	if ((hidden_file = ftohf2(file)) != NULL) {
++		hidden_dentry = dtohd2(dentry);
++		if (hidden_file->f_op && hidden_file->f_op->fsync) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++			mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++			down(&hidden_dentry->d_inode->i_sem);
++#endif
++			err2 = hidden_file->f_op->fsync(hidden_file, hidden_dentry, datasync);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++			mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++			up(&hidden_dentry->d_inode->i_sem);
++#endif
++		}
++	}
++	else
++		goto err;
++
++err:
++	return (err1 || err2);
++}
++
++
++STATIC int
++mini_fo_fasync(int fd, file_t *file, int flag)
++{
++	int err1 = 0;
++	int err2 = 0;
++
++	file_t *hidden_file = NULL;
++
++	check_mini_fo_file(file);
++
++	if((hidden_file = ftohf(file)) != NULL) {
++		err1 = hidden_file->f_op->fasync(fd, hidden_file, flag);
++	}
++	if((hidden_file = ftohf2(file)) != NULL) {
++		err2 = hidden_file->f_op->fasync(fd, hidden_file, flag);
++	}
++
++	return (err1 || err2);
++}
++
++
++
++struct file_operations mini_fo_dir_fops =
++	{
++		read:	generic_read_dir,
++		write:	mini_fo_write,
++		readdir: mini_fo_readdir,
++		poll:	mini_fo_poll,
++		/* ioctl:	mini_fo_ioctl, */
++		mmap:	mini_fo_mmap,
++		open:	mini_fo_open,
++		flush:	mini_fo_flush,
++		release: mini_fo_release,
++		fsync:	mini_fo_fsync,
++		fasync:	mini_fo_fasync,
++		/* not needed lock:	mini_fo_lock, */
++		/* not needed: readv */
++		/* not needed: writev */
++		/* not implemented: sendpage */
++		/* not implemented: get_unmapped_area */
++	};
++
++struct file_operations mini_fo_main_fops =
++	{
++		llseek:	mini_fo_llseek,
++		read:	mini_fo_read,
++		write:	mini_fo_write,
++		readdir: mini_fo_readdir,
++		poll:	mini_fo_poll,
++		/* ioctl:	mini_fo_ioctl, */
++		mmap:	mini_fo_mmap,
++		open:	mini_fo_open,
++		flush:	mini_fo_flush,
++		release: mini_fo_release,
++		fsync:	mini_fo_fsync,
++		fasync:	mini_fo_fasync,
++		/* not needed: lock:	mini_fo_lock, */
++		/* not needed: readv */
++		/* not needed: writev */
++		/* not implemented: sendpage */
++		/* not implemented: get_unmapped_area */
++	};
+--- /dev/null
++++ b/fs/mini_fo/fist.h
+@@ -0,0 +1,252 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++
++/*
++ *  $Id$
++ */
++
++#ifndef __FIST_H_
++#define __FIST_H_
++
++/*
++ * KERNEL ONLY CODE:
++ */
++#ifdef __KERNEL__
++#include <linux/version.h>
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19)
++#include <linux/autoconf.h>
++#else
++#include <linux/config.h>
++#endif
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++#ifdef CONFIG_MODVERSIONS
++# define MODVERSIONS
++# include <linux/modversions.h>
++#endif /* CONFIG_MODVERSIONS */
++#endif /* KERNEL_VERSION < 2.6.0 */
++#include <linux/sched.h>
++#include <linux/kernel.h>
++#include <linux/mm.h>
++#include <linux/string.h>
++#include <linux/stat.h>
++#include <linux/errno.h>
++#include <linux/wait.h>
++#include <linux/limits.h>
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++#include <linux/locks.h>
++#else
++#include <linux/buffer_head.h>
++#include <linux/pagemap.h>
++#include <linux/namei.h>
++#include <linux/module.h>
++#include <linux/mount.h>
++#include <linux/page-flags.h>
++#include <linux/writeback.h>
++#include <linux/statfs.h>
++#endif
++#include <linux/smp.h>
++#include <linux/smp_lock.h>
++#include <linux/file.h>
++#include <linux/slab.h>
++#include <linux/vmalloc.h>
++#include <linux/poll.h>
++#include <linux/list.h>
++#include <linux/init.h>
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20)
++#include <linux/xattr.h>
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#include <linux/security.h>
++#endif
++
++#include <linux/swap.h>
++
++#include <asm/system.h>
++/* #include <asm/segment.h> */
++#include <asm/mman.h>
++#include <linux/seq_file.h>
++
++/*
++ * MACROS:
++ */
++
++/* those mapped to ATTR_* were copied from linux/fs.h */
++#define FA_MODE		ATTR_MODE
++#define FA_UID		ATTR_UID
++#define FA_GID		ATTR_GID
++#define FA_SIZE		ATTR_SIZE
++#define FA_ATIME	ATTR_ATIME
++#define FA_MTIME	ATTR_MTIME
++#define FA_CTIME	ATTR_CTIME
++#define FA_ATIME_SET	ATTR_ATIME_SET
++#define FA_MTIME_SET	ATTR_MTIME_SET
++#define FA_FORCE	ATTR_FORCE
++#define FA_ATTR_FLAGS	ATTR_ATTR_FLAG
++
++/* must be greater than all other ATTR_* flags! */
++#define FA_NLINK	2048
++#define FA_BLKSIZE	4096
++#define FA_BLOCKS	8192
++#define FA_TIMES	(FA_ATIME|FA_MTIME|FA_CTIME)
++#define FA_ALL		0
++
++/* macros to manage changes between kernels */
++#define INODE_DATA(i)	(&(i)->i_data)
++
++#define MIN(x,y) ((x < y) ? (x) : (y))
++#define MAX(x,y) ((x > y) ? (x) : (y))
++#define MAXPATHLEN PATH_MAX
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,5)
++# define lookup_one_len(a,b,c) lookup_one(a,b)
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,4,5) */
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,8)
++# define generic_file_llseek default_llseek
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,4,8) */
++
++#ifndef SEEK_SET
++# define SEEK_SET 0
++#endif /* not SEEK_SET */
++
++#ifndef SEEK_CUR
++# define SEEK_CUR 1
++#endif /* not SEEK_CUR */
++
++#ifndef SEEK_END
++# define SEEK_END 2
++#endif /* not SEEK_END */
++
++#ifndef DEFAULT_POLLMASK
++# define DEFAULT_POLLMASK (POLLIN | POLLOUT | POLLRDNORM | POLLWRNORM)
++#endif /* not DEFAULT_POLLMASK */
++
++/* XXX: fix this so fistgen generates kfree() code directly */
++#define kfree_s(a,b) kfree(a)
++
++/*
++ * TYPEDEFS:
++ */
++typedef struct dentry dentry_t;
++typedef struct file file_t;
++typedef struct inode inode_t;
++typedef inode_t vnode_t;
++typedef struct page page_t;
++typedef struct qstr qstr_t;
++typedef struct super_block super_block_t;
++typedef super_block_t vfs_t;
++typedef struct vm_area_struct vm_area_t;
++
++
++/*
++ * EXTERNALS:
++ */
++
++#define FPPF(str,page) printk("PPF %s 0x%x/%d: Lck:%d Err:%d Ref:%d Upd:%d Other::%d:%d:%d:%d:\n", \
++		str, \
++		(int) page, \
++		(int) page->index, \
++		(PageLocked(page) ? 1 : 0), \
++		(PageError(page) ? 1 : 0), \
++		(PageReferenced(page) ? 1 : 0), \
++		(Page_Uptodate(page) ? 1 : 0), \
++		(PageDecrAfter(page) ? 1 : 0), \
++		(PageSlab(page) ? 1 : 0), \
++		(PageSwapCache(page) ? 1 : 0), \
++		(PageReserved(page) ? 1 : 0) \
++		)
++#define EZKDBG printk("EZK %s:%d:%s\n",__FILE__,__LINE__,__FUNCTION__)
++#if 0
++# define EZKDBG1 printk("EZK %s:%d\n",__FILE__,__LINE__)
++#else
++# define EZKDBG1
++#endif
++
++extern int fist_get_debug_value(void);
++extern int fist_set_debug_value(int val);
++#if 0 /* mini_fo doesn't need these */
++extern void fist_dprint_internal(int level, char *str,...);
++extern void fist_print_dentry(char *str, const dentry_t *dentry);
++extern void fist_print_inode(char *str, const inode_t *inode);
++extern void fist_print_file(char *str, const file_t *file);
++extern void fist_print_buffer_flags(char *str, struct buffer_head *buffer);
++extern void fist_print_page_flags(char *str, page_t *page);
++extern void fist_print_page_bytes(char *str, page_t *page);
++extern void fist_print_pte_flags(char *str, const page_t *page);
++extern void fist_checkinode(inode_t *inode, char *msg);
++extern void fist_print_sb(char *str, const super_block_t *sb);
++
++/* §$% by mk: special debug functions */
++extern void fist_mk_print_dentry(char *str, const dentry_t *dentry);
++extern void fist_mk_print_inode(char *str, const inode_t *inode);
++
++extern char *add_indent(void);
++extern char *del_indent(void);
++#endif/* mini_fo doesn't need these */
++
++
++#define STATIC
++#define ASSERT(EX)	\
++do {	\
++    if (!(EX)) {	\
++	printk(KERN_CRIT "ASSERTION FAILED: %s at %s:%d (%s)\n", #EX,	\
++	       __FILE__, __LINE__, __FUNCTION__);	\
++	(*((char *)0))=0;	\
++    }	\
++} while (0)
++/* same ASSERT, but tell me who was the caller of the function */
++#define ASSERT2(EX)	\
++do {	\
++    if (!(EX)) {	\
++	printk(KERN_CRIT "ASSERTION FAILED (caller): %s at %s:%d (%s)\n", #EX,	\
++	       file, line, func);	\
++	(*((char *)0))=0;	\
++    }	\
++} while (0)
++
++#if 0 /* mini_fo doesn't need these */
++#define dprintk(format, args...) printk(KERN_DEBUG format, ##args)
++#define fist_dprint(level, str, args...) fist_dprint_internal(level, KERN_DEBUG str, ## args)
++#define print_entry_location() fist_dprint(4, "%sIN:  %s %s:%d\n", add_indent(), __FUNCTION__, __FILE__, __LINE__)
++#define print_exit_location() fist_dprint(4, "%s OUT: %s %s:%d\n", del_indent(), __FUNCTION__, __FILE__, __LINE__)
++#define print_exit_status(status) fist_dprint(4, "%s OUT: %s %s:%d, STATUS: %d\n", del_indent(), __FUNCTION__, __FILE__, __LINE__, status)
++#define print_exit_pointer(status) \
++do { \
++  if (IS_ERR(status)) \
++    fist_dprint(4, "%s OUT: %s %s:%d, RESULT: %ld\n", del_indent(), __FUNCTION__, __FILE__, __LINE__, PTR_ERR(status)); \
++  else \
++    fist_dprint(4, "%s OUT: %s %s:%d, RESULT: 0x%x\n", del_indent(), __FUNCTION__, __FILE__, __LINE__, PTR_ERR(status)); \
++} while (0)
++#endif/* mini_fo doesn't need these */
++
++#endif /* __KERNEL__ */
++
++
++/*
++ * DEFINITIONS FOR USER AND KERNEL CODE:
++ * (Note: ioctl numbers 1--9 are reserved for fistgen, the rest
++ *  are auto-generated automatically based on the user's .fist file.)
++ */
++# define FIST_IOCTL_GET_DEBUG_VALUE	_IOR(0x15, 1, int)
++# define FIST_IOCTL_SET_DEBUG_VALUE	_IOW(0x15, 2, int)
++
++#endif /* not __FIST_H_ */
+--- /dev/null
++++ b/fs/mini_fo/inode.c
+@@ -0,0 +1,1564 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_create(inode_t *dir, dentry_t *dentry, int mode, struct nameidata *nd)
++#else
++mini_fo_create(inode_t *dir, dentry_t *dentry, int mode)
++#endif
++{
++	int err = 0;
++
++	check_mini_fo_dentry(dentry);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	err = create_sto_reg_file(dentry, mode, nd);
++#else
++	err = create_sto_reg_file(dentry, mode);
++#endif
++	check_mini_fo_dentry(dentry);
++	return err;
++}
++
++
++STATIC dentry_t *
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_lookup(inode_t *dir, dentry_t *dentry, struct nameidata* nd)
++#else
++mini_fo_lookup(inode_t *dir, dentry_t *dentry)
++#endif
++{
++	int err = 0;
++	dentry_t *hidden_dir_dentry;
++	dentry_t *hidden_dentry = NULL;
++
++	dentry_t *hidden_sto_dir_dentry;
++	dentry_t *hidden_sto_dentry = NULL;
++
++	/* whiteout flag */
++	int del_flag = 0;
++	char *bpath = NULL;
++
++	const char *name;
++	unsigned int namelen;
++
++	/* Don't allow lookups of META-files */
++	namelen = strlen(META_FILENAME);
++	if(namelen == dentry->d_name.len) {
++		if(!strncmp(dentry->d_name.name, META_FILENAME, namelen)) {
++			err = -ENOENT;
++			goto out;
++		}
++	}
++
++	hidden_dir_dentry = dtohd(dentry->d_parent);
++	hidden_sto_dir_dentry = dtohd2(dentry->d_parent);
++
++	name = dentry->d_name.name;
++	namelen = dentry->d_name.len;
++
++	/* must initialize dentry operations */
++	dentry->d_op = &mini_fo_dops;
++
++	/* setup the del_flag */
++	del_flag = __meta_check_d_entry(dir, name, namelen);
++	bpath = __meta_check_r_entry(dir, name, namelen);
++
++	/* perform the lookups of base and storage files:
++	 *
++	 * This caused some serious trouble, as a lookup_one_len passing
++	 * a negative dentry oopses. Solution is to only do the lookup
++	 * if the dentry is positive, else we set it to NULL
++	 * More trouble, who said a *_dir_dentry can't be NULL?
++	 */
++	if(bpath) {
++		/* Cross-Interposing (C), yeah! */
++		hidden_dentry = bpath_walk(dir->i_sb, bpath);
++		if(!hidden_dentry || !hidden_dentry->d_inode) {
++			printk(KERN_CRIT "mini_fo_lookup: bpath_walk failed.\n");
++			err= -EINVAL;
++			goto out;
++		}
++
++		/* this can be set up safely without fear of spaghetti
++		 * interposing as it is only used for copying times */
++		hidden_dir_dentry = hidden_dentry->d_parent;
++		kfree(bpath);
++	}
++	else if(hidden_dir_dentry && hidden_dir_dentry->d_inode)
++		hidden_dentry =
++			lookup_one_len(name, hidden_dir_dentry, namelen);
++	else
++		hidden_dentry = NULL;
++
++	if(hidden_sto_dir_dentry && hidden_sto_dir_dentry->d_inode)
++		hidden_sto_dentry =
++			lookup_one_len(name, hidden_sto_dir_dentry, namelen);
++	else
++		hidden_sto_dentry =  NULL;
++
++	/* catch error in lookup */
++	if (IS_ERR(hidden_dentry) || IS_ERR(hidden_sto_dentry)) {
++		/* mk: we need to call dput on the dentry, whose
++		 * lookup_one_len operation failed, in order to avoid
++		 * unmount trouble.
++		 */
++		if(IS_ERR(hidden_dentry)) {
++			printk(KERN_CRIT "mini_fo_lookup: ERR from base dentry, lookup failed.\n");
++			err = PTR_ERR(hidden_dentry);
++		} else {
++			dput(hidden_dentry);
++		}
++		if(IS_ERR(hidden_sto_dentry)) {
++			printk(KERN_CRIT "mini_fo_lookup: ERR from storage dentry, lookup failed.\n");
++			err = PTR_ERR(hidden_sto_dentry);
++		} else {
++			dput(hidden_sto_dentry);
++		}
++		goto out;
++	}
++
++	/* allocate dentry private data */
++	__dtopd(dentry) = (struct mini_fo_dentry_info *)
++		kmalloc(sizeof(struct mini_fo_dentry_info), GFP_KERNEL);
++
++	if (!dtopd(dentry)) {
++		err = -ENOMEM;
++		goto out_dput;
++	}
++
++	/* check for different states of the mini_fo file to be looked up. */
++
++	/* state 1, file has been modified */
++	if(hidden_dentry && hidden_sto_dentry &&
++	   hidden_dentry->d_inode && hidden_sto_dentry->d_inode && !del_flag) {
++
++		/* update parent directory's atime */
++		fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode);
++
++		dtopd(dentry)->state = MODIFIED;
++		dtohd(dentry) = hidden_dentry;
++		dtohd2(dentry) = hidden_sto_dentry;
++
++		err = mini_fo_tri_interpose(hidden_dentry,
++					    hidden_sto_dentry,
++					    dentry, dir->i_sb, 1);
++		if (err) {
++			printk(KERN_CRIT "mini_fo_lookup: error interposing (state1).\n");
++			goto out_free;
++		}
++		goto out;
++	}
++	/* state 2, file is unmodified */
++	if(hidden_dentry && hidden_dentry->d_inode && !del_flag) {
++
++		fist_copy_attr_atime(dir, hidden_dir_dentry->d_inode);
++
++		dtopd(dentry)->state = UNMODIFIED;
++		dtohd(dentry) = hidden_dentry;
++		dtohd2(dentry) = hidden_sto_dentry; /* could be negative */
++
++		err = mini_fo_tri_interpose(hidden_dentry,
++					    hidden_sto_dentry,
++					    dentry, dir->i_sb, 1);
++		if (err) {
++			printk(KERN_CRIT "mini_fo_lookup: error interposing (state2).\n");
++			goto out_free;
++		}
++		goto out;
++	}
++	/* state 3, file has been newly created */
++	if(hidden_sto_dentry && hidden_sto_dentry->d_inode && !del_flag) {
++
++		fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode);
++		dtopd(dentry)->state = CREATED;
++		dtohd(dentry) = hidden_dentry; /* could be negative */
++		dtohd2(dentry) = hidden_sto_dentry;
++
++		err = mini_fo_tri_interpose(hidden_dentry,
++					    hidden_sto_dentry,
++					    dentry, dir->i_sb, 1);
++		if (err) {
++			printk(KERN_CRIT "mini_fo_lookup: error interposing (state3).\n");
++			goto out_free;
++		}
++		goto out;
++	}
++
++	/* state 4, file has deleted and created again. */
++	if(hidden_dentry && hidden_sto_dentry &&
++	   hidden_dentry->d_inode &&
++	   hidden_sto_dentry->d_inode && del_flag) {
++
++		fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode);
++		dtopd(dentry)->state = DEL_REWRITTEN;
++		dtohd(dentry) = NULL;
++		dtohd2(dentry) = hidden_sto_dentry;
++
++		err = mini_fo_tri_interpose(NULL,
++					    hidden_sto_dentry,
++					    dentry, dir->i_sb, 1);
++		if (err) {
++			printk(KERN_CRIT "mini_fo_lookup: error interposing (state4).\n");
++			goto out_free;
++		}
++		/* We will never need this dentry again, as the file has been
++		 * deleted from base */
++		dput(hidden_dentry);
++		goto out;
++	}
++	/* state 5, file has been deleted in base */
++	if(hidden_dentry && hidden_sto_dentry &&
++	   hidden_dentry->d_inode &&
++	   !hidden_sto_dentry->d_inode && del_flag) {
++
++		/* check which parents atime we need for updating */
++		if(hidden_sto_dir_dentry->d_inode)
++			fist_copy_attr_atime(dir,
++					     hidden_sto_dir_dentry->d_inode);
++		else
++			fist_copy_attr_atime(dir,
++					     hidden_dir_dentry->d_inode);
++
++		dtopd(dentry)->state = DELETED;
++		dtohd(dentry) = NULL;
++		dtohd2(dentry) = hidden_sto_dentry;
++
++		/* add negative dentry to dcache to speed up lookups */
++		d_add(dentry, NULL);
++		dput(hidden_dentry);
++		goto out;
++	}
++	/* state 6, file does not exist */
++	if(((hidden_dentry && !hidden_dentry->d_inode) ||
++	    (hidden_sto_dentry && !hidden_sto_dentry->d_inode)) && !del_flag)
++		{
++			/* check which parents atime we need for updating */
++			if(hidden_sto_dir_dentry && hidden_sto_dir_dentry->d_inode)
++				fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode);
++			else
++				fist_copy_attr_atime(dir, hidden_dir_dentry->d_inode);
++
++			dtopd(dentry)->state = NON_EXISTANT;
++			dtohd(dentry) = hidden_dentry;
++			dtohd2(dentry) = hidden_sto_dentry;
++			d_add(dentry, NULL);
++			goto out;
++		}
++
++	/* if we get to here, were in an invalid state. bad. */
++	printk(KERN_CRIT "mini_fo_lookup: ERROR, meta data corruption detected.\n");
++
++	/* end state checking */
++ out_free:
++	d_drop(dentry);		/* so that our bad dentry will get destroyed */
++	kfree(dtopd(dentry));
++	__dtopd(dentry) = NULL;	/* be safe */
++
++ out_dput:
++	if(hidden_dentry)
++		dput(hidden_dentry);
++	if(hidden_sto_dentry)
++		dput(hidden_sto_dentry); /* drops usage count and marks for release */
++
++ out:
++	/* initalize wol if file exists and is directory */
++	if(dentry->d_inode) {
++		if(S_ISDIR(dentry->d_inode->i_mode)) {
++			itopd(dentry->d_inode)->deleted_list_size = -1;
++			itopd(dentry->d_inode)->renamed_list_size = -1;
++			meta_build_lists(dentry);
++		}
++	}
++	return ERR_PTR(err);
++}
++
++
++STATIC int
++mini_fo_link(dentry_t *old_dentry, inode_t *dir, dentry_t *new_dentry)
++{
++	int err;
++	dentry_t *hidden_old_dentry;
++	dentry_t *hidden_new_dentry;
++	dentry_t *hidden_dir_dentry;
++
++
++	check_mini_fo_dentry(old_dentry);
++	check_mini_fo_dentry(new_dentry);
++	check_mini_fo_inode(dir);
++
++	/* no links to directorys and existing targets target allowed */
++	if(S_ISDIR(old_dentry->d_inode->i_mode) ||
++	   is_mini_fo_existant(new_dentry)) {
++		err = -EPERM;
++		goto out;
++	}
++
++	/* bring it directly from unmod to del_rew */
++	if(dtost(old_dentry) == UNMODIFIED) {
++		err = nondir_unmod_to_mod(old_dentry, 1);
++		if(err) {
++			err = -EINVAL;
++			goto out;
++		}
++		err = meta_add_d_entry(old_dentry->d_parent,
++				       old_dentry->d_name.name,
++				       old_dentry->d_name.len);
++		if(err) {
++			err = -EINVAL;
++			goto out;
++		}
++		dput(dtohd(old_dentry));
++		dtohd(old_dentry) = NULL;
++		dtost(old_dentry) = DEL_REWRITTEN;
++	}
++
++	err = get_neg_sto_dentry(new_dentry);
++	if(err) {
++		err = -EINVAL;
++		goto out;
++	}
++
++	hidden_old_dentry = dtohd2(old_dentry);
++	hidden_new_dentry = dtohd2(new_dentry);
++
++	dget(hidden_old_dentry);
++	dget(hidden_new_dentry);
++
++	/* was: hidden_dir_dentry = lock_parent(hidden_new_dentry); */
++	hidden_dir_dentry = dget(hidden_new_dentry->d_parent);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = vfs_link(hidden_old_dentry,
++		       hidden_dir_dentry->d_inode,
++		       hidden_new_dentry);
++	if (err || !hidden_new_dentry->d_inode)
++		goto out_lock;
++
++	dtost(new_dentry) = CREATED;
++ 	err = mini_fo_tri_interpose(NULL, hidden_new_dentry, new_dentry, dir->i_sb, 0);
++	if (err)
++		goto out_lock;
++
++	fist_copy_attr_timesizes(dir, hidden_new_dentry->d_inode);
++	/* propagate number of hard-links */
++	old_dentry->d_inode->i_nlink = itohi2(old_dentry->d_inode)->i_nlink;
++
++ out_lock:
++	/* was: unlock_dir(hidden_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_dir_dentry);
++
++	dput(hidden_new_dentry);
++	dput(hidden_old_dentry);
++	if (!new_dentry->d_inode)
++		d_drop(new_dentry);
++
++ out:
++	return err;
++}
++
++
++STATIC int
++mini_fo_unlink(inode_t *dir, dentry_t *dentry)
++{
++	int err = 0;
++
++	dget(dentry);
++	if(dtopd(dentry)->state == MODIFIED) {
++		err = nondir_mod_to_del(dentry);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == UNMODIFIED) {
++		err = nondir_unmod_to_del(dentry);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == CREATED) {
++		err = nondir_creat_to_del(dentry);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == DEL_REWRITTEN) {
++		err = nondir_del_rew_to_del(dentry);
++		goto out;
++	}
++
++	printk(KERN_CRIT "mini_fo_unlink: ERROR, invalid state detected.\n");
++
++ out:
++	fist_copy_attr_times(dir, itohi2(dentry->d_parent->d_inode));
++
++	if(!err) {
++		/* is this causing my pain? d_delete(dentry); */
++		d_drop(dentry);
++	}
++
++	dput(dentry);
++	return err;
++}
++
++
++STATIC int
++mini_fo_symlink(inode_t *dir, dentry_t *dentry, const char *symname)
++{
++	int err=0;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++        umode_t mode;
++#endif
++
++	/* Fail if the symlink file exists */
++	if(!(dtost(dentry) == DELETED ||
++	     dtost(dentry) == NON_EXISTANT)) {
++		err = -EEXIST;
++		goto out;
++	}
++
++	err = get_neg_sto_dentry(dentry);
++	if(err) {
++		err = -EINVAL;
++		goto out;
++	}
++	hidden_sto_dentry = dtohd2(dentry);
++
++	dget(hidden_sto_dentry);
++	/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	mode = S_IALLUGO;
++	err = vfs_symlink(hidden_sto_dir_dentry->d_inode,
++			  hidden_sto_dentry, symname, mode);
++#else
++	err = vfs_symlink(hidden_sto_dir_dentry->d_inode,
++			  hidden_sto_dentry,
++			  symname);
++#endif
++	if (err || !hidden_sto_dentry->d_inode)
++                goto out_lock;
++
++        if(dtost(dentry) == DELETED) {
++                dtost(dentry) = DEL_REWRITTEN;
++                err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0);
++                if(err)
++                        goto out_lock;
++        } else if(dtost(dentry) == NON_EXISTANT) {
++                dtost(dentry) = CREATED;
++                err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0);
++                if(err)
++                        goto out_lock;
++        }
++	fist_copy_attr_timesizes(dir, hidden_sto_dir_dentry->d_inode);
++
++ out_lock:
++        /* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++
++        dput(hidden_sto_dentry);
++        if (!dentry->d_inode)
++                d_drop(dentry);
++ out:
++        return err;
++}
++
++STATIC int
++mini_fo_mkdir(inode_t *dir, dentry_t *dentry, int mode)
++{
++	int err;
++
++	err = create_sto_dir(dentry, mode);
++
++	check_mini_fo_dentry(dentry);
++
++	return err;
++}
++
++
++STATIC int
++mini_fo_rmdir(inode_t *dir, dentry_t *dentry)
++{
++	int err = 0;
++
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++	dentry_t *meta_dentry;
++	inode_t *hidden_sto_dir = NULL;
++
++	check_mini_fo_dentry(dentry);
++	check_mini_fo_inode(dir);
++
++	dget(dentry);
++	if(dtopd(dentry)->state == MODIFIED) {
++		/* XXX: disabled, because it does not bother to check files on
++		 * the original filesystem - just a hack, but better than simply
++		 * removing it without testing */
++		err = -EINVAL;
++		goto out;
++
++		hidden_sto_dir = itohi2(dir);
++		hidden_sto_dentry = dtohd2(dentry);
++
++		/* was:hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++		hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++		/* Delete an old WOL file contained in the storage dir */
++		meta_dentry = lookup_one_len(META_FILENAME,
++					     hidden_sto_dentry,
++					     strlen(META_FILENAME));
++		if(meta_dentry->d_inode) {
++			err = vfs_unlink(hidden_sto_dentry->d_inode, meta_dentry);
++			dput(meta_dentry);
++			if(!err)
++				d_delete(meta_dentry);
++		}
++
++		err = vfs_rmdir(hidden_sto_dir, hidden_sto_dentry);
++		dput(hidden_sto_dentry);
++		if(!err)
++			d_delete(hidden_sto_dentry);
++
++		/* propagate number of hard-links */
++		dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++
++		dput(dtohd(dentry));
++
++		dtohd(dentry) = NULL;
++		dtopd(dentry)->state = DELETED;
++
++		/* carefull with R files */
++		if( __meta_is_r_entry(dir,
++				      dentry->d_name.name,
++				      dentry->d_name.len) == 1) {
++			err = meta_remove_r_entry(dentry->d_parent,
++						  dentry->d_name.name,
++						  dentry->d_name.len);
++			if(err) {
++				printk(KERN_CRIT "mini_fo: rmdir: meta_remove_r_entry failed.\n");
++				goto out;
++			}
++		}
++		else {
++			/* ok, add deleted file to META */
++			meta_add_d_entry(dentry->d_parent,
++					 dentry->d_name.name,
++					 dentry->d_name.len);
++		}
++		/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++		dput(hidden_sto_dir_dentry);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == UNMODIFIED) {
++		/* XXX: simply adding it to the delete list here is fscking dangerous!
++		 * as a temporary hack, i will disable rmdir on unmodified directories
++		 * for now.
++		 */
++		err = -EINVAL;
++		goto out;
++
++		err = get_neg_sto_dentry(dentry);
++		if(err) {
++			err = -EINVAL;
++			goto out;
++		}
++
++		/* dput base dentry, this will relase the inode and free the
++		 * dentry, as we will never need it again. */
++		dput(dtohd(dentry));
++		dtohd(dentry) = NULL;
++		dtopd(dentry)->state = DELETED;
++
++		/* add deleted file to META-file */
++		meta_add_d_entry(dentry->d_parent,
++				 dentry->d_name.name,
++				 dentry->d_name.len);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == CREATED) {
++		hidden_sto_dir = itohi2(dir);
++		hidden_sto_dentry = dtohd2(dentry);
++
++		/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry);*/
++		hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++		/* Delete an old WOL file contained in the storage dir */
++		meta_dentry = lookup_one_len(META_FILENAME,
++					     hidden_sto_dentry,
++					     strlen(META_FILENAME));
++		if(meta_dentry->d_inode) {
++			/* is this necessary? dget(meta_dentry); */
++			err = vfs_unlink(hidden_sto_dentry->d_inode,
++					 meta_dentry);
++			dput(meta_dentry);
++			if(!err)
++				d_delete(meta_dentry);
++		}
++
++		err = vfs_rmdir(hidden_sto_dir, hidden_sto_dentry);
++		dput(hidden_sto_dentry);
++		if(!err)
++			d_delete(hidden_sto_dentry);
++
++		/* propagate number of hard-links */
++		dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++		dtopd(dentry)->state = NON_EXISTANT;
++
++		/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++		dput(hidden_sto_dir_dentry);
++
++		goto out;
++	}
++	else if(dtopd(dentry)->state == DEL_REWRITTEN) {
++		hidden_sto_dir = itohi2(dir);
++		hidden_sto_dentry = dtohd2(dentry);
++
++		/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry);*/
++		hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++		/* Delete an old WOL file contained in the storage dir */
++		meta_dentry = lookup_one_len(META_FILENAME,
++					     hidden_sto_dentry,
++					     strlen(META_FILENAME));
++		if(meta_dentry->d_inode) {
++			/* is this necessary? dget(meta_dentry); */
++			err = vfs_unlink(hidden_sto_dentry->d_inode,
++					 meta_dentry);
++			dput(meta_dentry);
++			if(!err)
++				d_delete(meta_dentry);
++		}
++
++		err = vfs_rmdir(hidden_sto_dir, hidden_sto_dentry);
++		dput(hidden_sto_dentry);
++		if(!err)
++			d_delete(hidden_sto_dentry);
++
++		/* propagate number of hard-links */
++		dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++		dtopd(dentry)->state = DELETED;
++		/* was: unlock_dir(hidden_sto_dir_dentry); */
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++		dput(hidden_sto_dir_dentry);
++		goto out;
++	}
++
++	printk(KERN_CRIT "mini_fo_rmdir: ERROR, invalid state detected.\n");
++
++ out:
++	if(!err) {
++		d_drop(dentry);
++	}
++
++	fist_copy_attr_times(dir, itohi2(dentry->d_parent->d_inode));
++	dput(dentry);
++
++	return err;
++}
++
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_mknod(inode_t *dir, dentry_t *dentry, int mode, dev_t dev)
++#else
++mini_fo_mknod(inode_t *dir, dentry_t *dentry, int mode, int dev)
++#endif
++{
++	int err = 0;
++
++	check_mini_fo_dentry(dentry);
++
++	err = create_sto_nod(dentry, mode, dev);
++	if(err) {
++		printk(KERN_CRIT "mini_fo_mknod: creating sto nod failed.\n");
++		err = -EINVAL;
++	}
++
++	check_mini_fo_dentry(dentry);
++	return err;
++}
++
++
++STATIC int
++mini_fo_rename(inode_t *old_dir, dentry_t *old_dentry,
++	       inode_t *new_dir, dentry_t *new_dentry)
++{
++	/* dispatch */
++	if(S_ISDIR(old_dentry->d_inode->i_mode))
++		return rename_directory(old_dir, old_dentry, new_dir, new_dentry);
++	return rename_nondir(old_dir, old_dentry, new_dir, new_dentry);
++
++}
++
++int rename_directory(inode_t *old_dir, dentry_t *old_dentry,
++		     inode_t *new_dir, dentry_t *new_dentry)
++{
++	int err, bpath_len;
++	char *bpath;
++
++	dentry_t *hidden_old_dentry;
++	dentry_t *hidden_new_dentry;
++	dentry_t *hidden_old_dir_dentry;
++	dentry_t *hidden_new_dir_dentry;
++
++	err = 0;
++	bpath = NULL;
++	bpath_len = 0;
++
++	/* this is a test, chuck out if it works */
++	if(!(dtopd(new_dentry)->state == DELETED ||
++	     dtopd(new_dentry)->state == NON_EXISTANT)) {
++		printk(KERN_CRIT "mini_fo: rename_directory: \
++                                  uh, ah, new_dentry not negative.\n");
++		/* return -1; */
++	}
++
++	/* state = UNMODIFIED */
++	if(dtopd(old_dentry)->state == UNMODIFIED) {
++		err = dir_unmod_to_mod(old_dentry);
++		if (err)
++			goto out;
++	}
++
++	/* state = MODIFIED */
++	if(dtopd(old_dentry)->state == MODIFIED) {
++		bpath = meta_check_r_entry(old_dentry->d_parent,
++					   old_dentry->d_name.name,
++					   old_dentry->d_name.len);
++		if(bpath) {
++			err = meta_remove_r_entry(old_dentry->d_parent,
++						  old_dentry->d_name.name,
++						  old_dentry->d_name.len);
++			if(err) {
++				printk(KERN_CRIT "mini_fo: rename_directory:\
++                                                   meta_remove_r_entry \
++                                                  failed.\n");
++				goto out;
++			}
++			err = meta_add_r_entry(new_dentry->d_parent,
++					       bpath,
++					       strlen(bpath),
++					       new_dentry->d_name.name,
++					       new_dentry->d_name.len);
++			kfree(bpath);
++		}
++		else {/* wol it */
++			err = meta_add_d_entry(old_dentry->d_parent,
++					       old_dentry->d_name.name,
++					       old_dentry->d_name.len);
++			if (err)
++				goto out;
++			/* put it on rename list */
++			err = get_mini_fo_bpath(old_dentry,
++						&bpath,
++						&bpath_len);
++			if (err)
++				goto out;
++			err = meta_add_r_entry(new_dentry->d_parent,
++					       bpath, bpath_len,
++					       new_dentry->d_name.name,
++					       new_dentry->d_name.len);
++			if (err)
++				goto out;
++		}
++		/* no state change, MODIFIED stays MODIFIED */
++	}
++	/* state = CREATED */
++	if(dtopd(old_dentry)->state == CREATED ||
++	   dtopd(old_dentry)->state == DEL_REWRITTEN) {
++		if(dtohd(old_dentry))
++			dput(dtohd(old_dentry));
++
++		if(dtopd(new_dentry)->state == DELETED) {
++			dtopd(old_dentry)->state = DEL_REWRITTEN;
++			dtohd(old_dentry) = NULL;
++		}
++		else if(dtopd(new_dentry)->state == NON_EXISTANT) {
++			dtopd(old_dentry)->state = CREATED;
++			/* steal new dentry's neg. base dentry */
++			dtohd(old_dentry) = dtohd(new_dentry);
++			dtohd(new_dentry) = NULL;
++		}
++	}
++	if(dtopd(new_dentry)->state == UNMODIFIED ||
++	   dtopd(new_dentry)->state == NON_EXISTANT) {
++		err = get_neg_sto_dentry(new_dentry);
++		if(err)
++			goto out;
++	}
++
++	/* now move sto file */
++	hidden_old_dentry = dtohd2(old_dentry);
++	hidden_new_dentry = dtohd2(new_dentry);
++
++	dget(hidden_old_dentry);
++	dget(hidden_new_dentry);
++
++	hidden_old_dir_dentry = dget(hidden_old_dentry->d_parent);
++	hidden_new_dir_dentry = dget(hidden_new_dentry->d_parent);
++	double_lock(hidden_old_dir_dentry, hidden_new_dir_dentry);
++
++	err = vfs_rename(hidden_old_dir_dentry->d_inode, hidden_old_dentry,
++			 hidden_new_dir_dentry->d_inode, hidden_new_dentry);
++	if(err)
++		goto out_lock;
++
++	fist_copy_attr_all(new_dir, hidden_new_dir_dentry->d_inode);
++	if (new_dir != old_dir)
++		fist_copy_attr_all(old_dir,
++				   hidden_old_dir_dentry->d_inode);
++
++ out_lock:
++	/* double_unlock will dput the new/old parent dentries
++	 * whose refcnts were incremented via get_parent above. */
++	double_unlock(hidden_old_dir_dentry, hidden_new_dir_dentry);
++	dput(hidden_new_dentry);
++	dput(hidden_old_dentry);
++
++ out:
++	return err;
++}
++
++int rename_nondir(inode_t *old_dir, dentry_t *old_dentry,
++		  inode_t *new_dir, dentry_t *new_dentry)
++{
++	int err=0;
++
++	check_mini_fo_dentry(old_dentry);
++	check_mini_fo_dentry(new_dentry);
++	check_mini_fo_inode(old_dir);
++	check_mini_fo_inode(new_dir);
++
++	/* state: UNMODIFIED */
++	if(dtost(old_dentry) == UNMODIFIED) {
++		err = nondir_unmod_to_mod(old_dentry, 1);
++		if(err) {
++			err = -EINVAL;
++			goto out;
++		}
++	}
++
++	/* the easy states */
++	if(exists_in_storage(old_dentry)) {
++
++		dentry_t *hidden_old_dentry;
++		dentry_t *hidden_new_dentry;
++		dentry_t *hidden_old_dir_dentry;
++		dentry_t *hidden_new_dir_dentry;
++
++		/* if old file is MODIFIED, add it to the deleted_list */
++		if(dtopd(old_dentry)->state == MODIFIED) {
++			meta_add_d_entry(old_dentry->d_parent,
++					 old_dentry->d_name.name,
++					 old_dentry->d_name.len);
++
++			dput(dtohd(old_dentry));
++		}
++		/* if old file is CREATED, we only release the base dentry */
++		if(dtopd(old_dentry)->state == CREATED) {
++			if(dtohd(old_dentry))
++				dput(dtohd(old_dentry));
++		}
++
++		/* now setup the new states (depends on new_dentry state) */
++		/* new dentry state =  MODIFIED */
++		if(dtopd(new_dentry)->state == MODIFIED) {
++			meta_add_d_entry(new_dentry->d_parent,
++					 new_dentry->d_name.name,
++					 new_dentry->d_name.len);
++
++			/* new dentry will be d_put'ed later by the vfs
++			 * so don't do it here
++			 * dput(dtohd(new_dentry));
++			 */
++			dtohd(old_dentry) = NULL;
++			dtopd(old_dentry)->state = DEL_REWRITTEN;
++		}
++		/* new dentry state =  UNMODIFIED */
++		else if(dtopd(new_dentry)->state == UNMODIFIED) {
++			if(get_neg_sto_dentry(new_dentry))
++				return -EINVAL;
++
++			meta_add_d_entry(new_dentry->d_parent,
++					 new_dentry->d_name.name,
++					 new_dentry->d_name.len);
++
++			/* is this right??? */
++			/*dput(dtohd(new_dentry));*/
++			dtohd(old_dentry) = NULL;
++			dtopd(old_dentry)->state = DEL_REWRITTEN;
++		}
++		/* new dentry state =  CREATED */
++		else if(dtopd(new_dentry)->state == CREATED) {
++			/* we keep the neg. base dentry (if exists) */
++			dtohd(old_dentry) = dtohd(new_dentry);
++			/* ...and set it to Null, or we'll get
++			 * dcache.c:345 if it gets dput twice... */
++			dtohd(new_dentry) = NULL;
++			dtopd(old_dentry)->state = CREATED;
++		}
++		/* new dentry state =  NON_EXISTANT */
++		else if(dtopd(new_dentry)->state == NON_EXISTANT) {
++			if(get_neg_sto_dentry(new_dentry))
++				return -EINVAL;
++
++			/* we keep the neg. base dentry (if exists) */
++			dtohd(old_dentry) = dtohd(new_dentry);
++			/* ...and set it to Null, or we'll get
++			 * Dr. dcache.c:345 if it gets dput twice... */
++			dtohd(new_dentry) = NULL;
++			dtopd(old_dentry)->state = CREATED;
++		}
++		/* new dentry state =  DEL_REWRITTEN or DELETED */
++		else if(dtopd(new_dentry)->state == DEL_REWRITTEN ||
++			dtopd(new_dentry)->state == DELETED) {
++			dtohd(old_dentry) = NULL;
++			dtopd(old_dentry)->state = DEL_REWRITTEN;
++		}
++		else { /* not possible, uhh, ahh */
++			printk(KERN_CRIT
++			       "mini_fo: rename_reg_file: invalid state detected [1].\n");
++			return -1;
++		}
++
++		/* now we definitely have a sto file */
++		hidden_old_dentry = dtohd2(old_dentry);
++		hidden_new_dentry = dtohd2(new_dentry);
++
++		dget(hidden_old_dentry);
++		dget(hidden_new_dentry);
++
++		hidden_old_dir_dentry = dget(hidden_old_dentry->d_parent);
++		hidden_new_dir_dentry = dget(hidden_new_dentry->d_parent);
++		double_lock(hidden_old_dir_dentry, hidden_new_dir_dentry);
++
++		err = vfs_rename(hidden_old_dir_dentry->d_inode,
++				 hidden_old_dentry,
++				 hidden_new_dir_dentry->d_inode,
++				 hidden_new_dentry);
++		if(err)
++			goto out_lock;
++
++		fist_copy_attr_all(new_dir, hidden_new_dir_dentry->d_inode);
++		if (new_dir != old_dir)
++			fist_copy_attr_all(old_dir, hidden_old_dir_dentry->d_inode);
++
++	out_lock:
++		/* double_unlock will dput the new/old parent dentries
++		 * whose refcnts were incremented via get_parent above.
++		 */
++		double_unlock(hidden_old_dir_dentry, hidden_new_dir_dentry);
++		dput(hidden_new_dentry);
++		dput(hidden_old_dentry);
++	out:
++		return err;
++	}
++	else { /* invalid state */
++		printk(KERN_CRIT "mini_fo: rename_reg_file: ERROR: invalid state detected [2].\n");
++		return -1;
++	}
++}
++
++
++STATIC int
++mini_fo_readlink(dentry_t *dentry, char *buf, int bufsiz)
++{
++	int err=0;
++	dentry_t *hidden_dentry = NULL;
++
++	if(dtohd2(dentry) && dtohd2(dentry)->d_inode) {
++		hidden_dentry = dtohd2(dentry);
++	} else if(dtohd(dentry) && dtohd(dentry)->d_inode) {
++		hidden_dentry = dtohd(dentry);
++	} else {
++		goto out;
++	}
++
++	if (!hidden_dentry->d_inode->i_op ||
++	    !hidden_dentry->d_inode->i_op->readlink) {
++		err = -EINVAL;		goto out;
++	}
++
++	err = hidden_dentry->d_inode->i_op->readlink(hidden_dentry,
++						     buf,
++						     bufsiz);
++	if (err > 0)
++		fist_copy_attr_atime(dentry->d_inode, hidden_dentry->d_inode);
++
++ out:
++	return err;
++}
++
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
++static int mini_fo_follow_link(dentry_t *dentry, struct nameidata *nd)
++#else
++static void* mini_fo_follow_link(dentry_t *dentry, struct nameidata *nd)
++#endif
++{
++	char *buf;
++	int len = PAGE_SIZE, err;
++	mm_segment_t old_fs;
++
++	/* in 2.6 this is freed by mini_fo_put_link called by __do_follow_link */
++	buf = kmalloc(len, GFP_KERNEL);
++	if (!buf) {
++		err = -ENOMEM;
++		goto out;
++	}
++
++	/* read the symlink, and then we will follow it */
++	old_fs = get_fs();
++	set_fs(KERNEL_DS);
++	err = dentry->d_inode->i_op->readlink(dentry, buf, len);
++	set_fs(old_fs);
++	if (err < 0) {
++		kfree(buf);
++		buf = NULL;
++		goto out;
++	}
++	buf[err] = 0;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++        nd_set_link(nd, buf);
++        err = 0;
++#else
++	err = vfs_follow_link(nd, buf);
++#endif
++
++ out:
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	kfree(buf);
++#endif
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
++        return err;
++#else
++        return ERR_PTR(err);
++#endif
++}
++
++STATIC
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
++void mini_fo_put_link(struct dentry *dentry, struct nameidata *nd)
++#else
++void mini_fo_put_link(struct dentry *dentry, struct nameidata *nd, void *cookie)
++#endif
++{
++        char *link;
++        link = nd_get_link(nd);
++        kfree(link);
++}
++#endif
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_permission(inode_t *inode, int mask, struct nameidata *nd)
++#else
++mini_fo_permission(inode_t *inode, int mask)
++#endif
++{
++	inode_t *hidden_inode;
++	int mode;
++	int err;
++
++	if(itohi2(inode)) {
++		hidden_inode = itohi2(inode);
++	} else {
++		hidden_inode = itohi(inode);
++	}
++	mode = inode->i_mode;
++
++	/* not really needed, as permission handles everything:
++	 *	err = vfs_permission(inode, mask);
++	 *	if (err)
++	 *		goto out;
++	 */
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	err = permission(hidden_inode, mask, nd);
++#else
++	err = permission(hidden_inode, mask);
++#endif
++
++	/*  out: */
++	return err;
++}
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++STATIC int
++mini_fo_inode_revalidate(dentry_t *dentry)
++{
++	int err = 0;
++	dentry_t *hidden_dentry;
++	inode_t *hidden_inode;
++
++	ASSERT(dentry->d_inode);
++	ASSERT(itopd(dentry->d_inode));
++
++	if(itohi2(dentry->d_inode)) {
++                hidden_dentry = dtohd2(dentry);
++		hidden_inode = hidden_dentry->d_inode;
++	} else if(itohi(dentry->d_inode)) {
++                hidden_dentry = dtohd(dentry);
++		hidden_inode = hidden_dentry->d_inode;
++	} else {
++                printk(KERN_CRIT "mini_fo_inode_revalidate: ERROR, invalid state detected.\n");
++                err = -ENOENT;
++                goto out;
++        }
++	if (hidden_inode && hidden_inode->i_op && hidden_inode->i_op->revalidate){
++		err = hidden_inode->i_op->revalidate(hidden_dentry);
++		if (err)
++			goto out;
++	}
++	fist_copy_attr_all(dentry->d_inode, hidden_inode);
++ out:
++	return err;
++}
++#endif
++
++STATIC int
++mini_fo_setattr(dentry_t *dentry, struct iattr *ia)
++{
++	int err = 0;
++
++	check_mini_fo_dentry(dentry);
++
++	if(!is_mini_fo_existant(dentry)) {
++		printk(KERN_CRIT "mini_fo_setattr: ERROR, invalid state detected [1].\n");
++		goto out;
++	}
++
++	if(dtost(dentry) == UNMODIFIED) {
++		if(!IS_COPY_FLAG(ia->ia_valid))
++			goto out; /* we ignore these changes to base */
++
++		if(S_ISDIR(dentry->d_inode->i_mode)) {
++			err = dir_unmod_to_mod(dentry);
++		} else {
++			/* we copy contents if file is not beeing truncated */
++			if(S_ISREG(dentry->d_inode->i_mode) &&
++			   !(ia->ia_size == 0 && (ia->ia_valid & ATTR_SIZE))) {
++				err = nondir_unmod_to_mod(dentry, 1);
++			} else
++				err = nondir_unmod_to_mod(dentry, 0);
++		}
++		if(err) {
++			err = -EINVAL;
++			printk(KERN_CRIT "mini_fo_setattr: ERROR changing states.\n");
++			goto out;
++		}
++	}
++	if(!exists_in_storage(dentry)) {
++		printk(KERN_CRIT "mini_fo_setattr: ERROR, invalid state detected [2].\n");
++		err = -EINVAL;
++		goto out;
++	}
++	ASSERT(dentry->d_inode);
++	ASSERT(dtohd2(dentry));
++	ASSERT(itopd(dentry->d_inode));
++	ASSERT(itohi2(dentry->d_inode));
++
++	err = notify_change(dtohd2(dentry), ia);
++	fist_copy_attr_all(dentry->d_inode, itohi2(dentry->d_inode));
++ out:
++	return err;
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++STATIC int
++mini_fo_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat)
++{
++	int err = 0;
++        dentry_t *hidden_dentry;
++
++	ASSERT(dentry->d_inode);
++	ASSERT(itopd(dentry->d_inode));
++
++	if(itohi2(dentry->d_inode)) {
++                hidden_dentry = dtohd2(dentry);
++	} else if(itohi(dentry->d_inode)) {
++                hidden_dentry = dtohd(dentry);
++	} else {
++                printk(KERN_CRIT "mini_fo_getattr: ERROR, invalid state detected.\n");
++                err = -ENOENT;
++                goto out;
++        }
++	fist_copy_attr_all(dentry->d_inode, hidden_dentry->d_inode);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	generic_fillattr(dentry->d_inode, stat);
++	if (!stat->blksize) {
++		struct super_block *s = hidden_dentry->d_inode->i_sb;
++		unsigned blocks;
++		blocks = (stat->size+s->s_blocksize-1) >> s->s_blocksize_bits;
++		stat->blocks = (s->s_blocksize / 512) * blocks;
++		stat->blksize = s->s_blocksize;
++	}
++ out:
++        return err;
++}
++#endif
++
++#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20))
++#if 0 /* no xattr_alloc() and xattr_free() */
++/* This is lifted from fs/xattr.c */
++static void *
++xattr_alloc(size_t size, size_t limit)
++{
++	void *ptr;
++
++	if (size > limit)
++		return ERR_PTR(-E2BIG);
++
++	if (!size)	/* size request, no buffer is needed */
++		return NULL;
++	else if (size <= PAGE_SIZE)
++		ptr = kmalloc((unsigned long) size, GFP_KERNEL);
++	else
++		ptr = vmalloc((unsigned long) size);
++	if (!ptr)
++		return ERR_PTR(-ENOMEM);
++	return ptr;
++}
++
++static void
++xattr_free(void *ptr, size_t size)
++{
++	if (!size)	/* size request, no buffer was needed */
++		return;
++	else if (size <= PAGE_SIZE)
++		kfree(ptr);
++	else
++		vfree(ptr);
++}
++#endif /* no xattr_alloc() and xattr_free() */
++
++/* BKL held by caller.
++ * dentry->d_inode->i_sem down
++ */
++STATIC int
++mini_fo_getxattr(struct dentry *dentry, const char *name, void *value, size_t size) {
++	struct dentry *hidden_dentry = NULL;
++	int err = -EOPNOTSUPP;
++	/* Define these anyway so we don't need as much ifdef'ed code. */
++	char *encoded_name = NULL;
++	char *encoded_value = NULL;
++
++	check_mini_fo_dentry(dentry);
++
++	if(exists_in_storage(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else
++		hidden_dentry = dtohd(dentry);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	if (hidden_dentry->d_inode->i_op->getxattr) {
++		encoded_name = (char *)name;
++		encoded_value = (char *)value;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_dentry->d_inode->i_sem);
++#endif
++		/* lock_kernel() already done by caller. */
++		err = hidden_dentry->d_inode->i_op->getxattr(hidden_dentry, encoded_name, encoded_value, size);
++		/* unlock_kernel() will be done by caller. */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_dentry->d_inode->i_sem);
++#endif
++	}
++	return err;
++}
++
++/* BKL held by caller.
++ * dentry->d_inode->i_sem down
++ */
++STATIC int
++#if ((LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,21) \
++     && LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,23)) \
++     || LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
++mini_fo_setxattr(struct dentry *dentry, const char *name,
++		 const void *value, size_t size, int flags)
++#else
++mini_fo_setxattr(struct dentry *dentry, const char *name,
++		 void *value, size_t size, int flags)
++#endif
++
++{
++	struct dentry *hidden_dentry = NULL;
++	int err = -EOPNOTSUPP;
++
++	/* Define these anyway, so we don't have as much ifdef'ed code. */
++	char *encoded_value = NULL;
++	char *encoded_name = NULL;
++
++	check_mini_fo_dentry(dentry);
++
++	if(exists_in_storage(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else
++		hidden_dentry = dtohd(dentry);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	if (hidden_dentry->d_inode->i_op->setxattr) {
++		encoded_name = (char *)name;
++		encoded_value = (char *)value;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_dentry->d_inode->i_sem);
++#endif
++		/* lock_kernel() already done by caller. */
++		err = hidden_dentry->d_inode->i_op->setxattr(hidden_dentry, encoded_name, encoded_value, size, flags);
++		/* unlock_kernel() will be done by caller. */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_dentry->d_inode->i_sem);
++#endif
++	}
++	return err;
++}
++
++/* BKL held by caller.
++ * dentry->d_inode->i_sem down
++ */
++STATIC int
++mini_fo_removexattr(struct dentry *dentry, const char *name) {
++	struct dentry *hidden_dentry = NULL;
++	int err = -EOPNOTSUPP;
++	char *encoded_name;
++
++	check_mini_fo_dentry(dentry);
++
++	if(exists_in_storage(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else
++		hidden_dentry = dtohd(dentry);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	if (hidden_dentry->d_inode->i_op->removexattr) {
++		encoded_name = (char *)name;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_dentry->d_inode->i_sem);
++#endif
++		/* lock_kernel() already done by caller. */
++		err = hidden_dentry->d_inode->i_op->removexattr(hidden_dentry, encoded_name);
++		/* unlock_kernel() will be done by caller. */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_dentry->d_inode->i_sem);
++#endif
++	}
++	return err;
++}
++
++/* BKL held by caller.
++ * dentry->d_inode->i_sem down
++ */
++STATIC int
++mini_fo_listxattr(struct dentry *dentry, char *list, size_t size) {
++	struct dentry *hidden_dentry = NULL;
++	int err = -EOPNOTSUPP;
++	char *encoded_list = NULL;
++
++	check_mini_fo_dentry(dentry);
++
++	if(exists_in_storage(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else
++		hidden_dentry = dtohd(dentry);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	if (hidden_dentry->d_inode->i_op->listxattr) {
++		encoded_list = list;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_dentry->d_inode->i_sem);
++#endif
++		/* lock_kernel() already done by caller. */
++		err = hidden_dentry->d_inode->i_op->listxattr(hidden_dentry, encoded_list, size);
++		/* unlock_kernel() will be done by caller. */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_dentry->d_inode->i_sem);
++#endif
++	}
++	return err;
++}
++# endif /* defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20)) */
++
++struct inode_operations mini_fo_symlink_iops =
++	{
++		readlink:	mini_fo_readlink,
++		follow_link: mini_fo_follow_link,
++		/* mk: permission:	mini_fo_permission, */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++		revalidate:	mini_fo_inode_revalidate,
++#endif
++		setattr:	mini_fo_setattr,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		getattr:	mini_fo_getattr,
++		put_link:       mini_fo_put_link,
++#endif
++
++#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20))
++		setxattr:	mini_fo_setxattr,
++		getxattr:	mini_fo_getxattr,
++		listxattr:	mini_fo_listxattr,
++		removexattr: mini_fo_removexattr
++# endif /* defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20)) */
++	};
++
++struct inode_operations mini_fo_dir_iops =
++	{
++		create:	mini_fo_create,
++		lookup:	mini_fo_lookup,
++		link:	mini_fo_link,
++		unlink:	mini_fo_unlink,
++		symlink:	mini_fo_symlink,
++		mkdir:	mini_fo_mkdir,
++		rmdir:	mini_fo_rmdir,
++		mknod:	mini_fo_mknod,
++		rename:	mini_fo_rename,
++		/* no readlink/follow_link for non-symlinks */
++		// off because we have setattr
++		//    truncate:	mini_fo_truncate,
++		/* mk:permission:	mini_fo_permission, */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++		revalidate:	mini_fo_inode_revalidate,
++#endif
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		getattr:	mini_fo_getattr,
++#endif
++		setattr:	mini_fo_setattr,
++#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20))
++		setxattr:	mini_fo_setxattr,
++		getxattr:	mini_fo_getxattr,
++		listxattr:	mini_fo_listxattr,
++		removexattr: mini_fo_removexattr
++# endif /* XATTR && LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20) */
++	};
++
++struct inode_operations mini_fo_main_iops =
++	{
++		/* permission:	mini_fo_permission, */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++		revalidate:	mini_fo_inode_revalidate,
++#endif
++		setattr:	mini_fo_setattr,
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		getattr:	mini_fo_getattr,
++#endif
++#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20))
++		setxattr:	mini_fo_setxattr,
++		getxattr:	mini_fo_getxattr,
++		listxattr:	mini_fo_listxattr,
++		removexattr:    mini_fo_removexattr
++# endif /* XATTR && LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20) */
++	};
+--- /dev/null
++++ b/fs/mini_fo/main.c
+@@ -0,0 +1,423 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++#include <linux/module.h>
++
++/* This definition must only appear after we include <linux/module.h> */
++#ifndef MODULE_LICENSE
++# define MODULE_LICENSE(bison)
++#endif /* not MODULE_LICENSE */
++
++/*
++ * This is the mini_fo tri interpose function, which extends the
++ * functionality of the regular interpose by interposing a higher
++ * level inode on top of two lower level ones: the base filesystem
++ * inode and the storage filesystem inode.
++ *
++ *  sb we pass is mini_fo's super_block
++ */
++int
++mini_fo_tri_interpose(dentry_t *hidden_dentry,
++		      dentry_t *hidden_sto_dentry,
++		      dentry_t *dentry, super_block_t *sb, int flag)
++{
++	inode_t *hidden_inode = NULL;
++	inode_t *hidden_sto_inode = NULL; /* store corresponding storage inode */
++	int err = 0;
++	inode_t *inode;
++
++	/* Pointer to hidden_sto_inode if exists, else to hidden_inode.
++	 * This is used to copy the attributes of the correct inode. */
++	inode_t *master_inode;
++
++	if(hidden_dentry)
++		hidden_inode = hidden_dentry->d_inode;
++	if(hidden_sto_dentry)
++		hidden_sto_inode = hidden_sto_dentry->d_inode;
++
++	ASSERT(dentry->d_inode == NULL);
++
++	/* mk: One of the inodes associated with the dentrys is likely to
++	 * be NULL, so carefull:
++	 */
++	ASSERT((hidden_inode != NULL) || (hidden_sto_inode != NULL));
++
++	if(hidden_sto_inode)
++		master_inode = hidden_sto_inode;
++	else
++		master_inode = hidden_inode;
++
++	/*
++	 * We allocate our new inode below, by calling iget.
++	 * iget will call our read_inode which will initialize some
++	 * of the new inode's fields
++	 */
++
++	/*
++	 * original: inode = iget(sb, hidden_inode->i_ino);
++	 */
++	inode = iget(sb, iunique(sb, 25));
++	if (!inode) {
++		err = -EACCES;		/* should be impossible??? */
++		goto out;
++	}
++
++	/*
++	 * interpose the inode if not already interposed
++	 *   this is possible if the inode is being reused
++	 * XXX: what happens if we get_empty_inode() but there's another already?
++	 * for now, ASSERT() that this can't happen; fix later.
++	 */
++	if (itohi(inode) != NULL) {
++		printk(KERN_CRIT "mini_fo_tri_interpose: itohi(inode) != NULL.\n");
++	}
++	if (itohi2(inode) != NULL) {
++		printk(KERN_CRIT "mini_fo_tri_interpose: itohi2(inode) != NULL.\n");
++	}
++
++	/* mk: Carefull, igrab can't handle NULL inodes (ok, why should it?), so
++	 * we need to check here:
++	 */
++	if(hidden_inode)
++		itohi(inode) = igrab(hidden_inode);
++	else
++		itohi(inode) = NULL;
++
++	if(hidden_sto_inode)
++		itohi2(inode) = igrab(hidden_sto_inode);
++	else
++		itohi2(inode) = NULL;
++
++
++	/* Use different set of inode ops for symlinks & directories*/
++	if (S_ISLNK(master_inode->i_mode))
++		inode->i_op = &mini_fo_symlink_iops;
++	else if (S_ISDIR(master_inode->i_mode))
++		inode->i_op = &mini_fo_dir_iops;
++
++	/* Use different set of file ops for directories */
++	if (S_ISDIR(master_inode->i_mode))
++		inode->i_fop = &mini_fo_dir_fops;
++
++	/* properly initialize special inodes */
++	if (S_ISBLK(master_inode->i_mode) || S_ISCHR(master_inode->i_mode) ||
++	    S_ISFIFO(master_inode->i_mode) || S_ISSOCK(master_inode->i_mode)) {
++		init_special_inode(inode, master_inode->i_mode, master_inode->i_rdev);
++	}
++
++	/* Fix our inode's address operations to that of the lower inode */
++	if (inode->i_mapping->a_ops != master_inode->i_mapping->a_ops) {
++		inode->i_mapping->a_ops = master_inode->i_mapping->a_ops;
++	}
++
++	/* only (our) lookup wants to do a d_add */
++	if (flag)
++		d_add(dentry, inode);
++	else
++		d_instantiate(dentry, inode);
++
++	ASSERT(dtopd(dentry) != NULL);
++
++	/* all well, copy inode attributes */
++	fist_copy_attr_all(inode, master_inode);
++
++ out:
++	return err;
++}
++
++/* parse mount options "base=" and "sto=" */
++dentry_t *
++mini_fo_parse_options(super_block_t *sb, char *options)
++{
++	dentry_t *hidden_root = ERR_PTR(-EINVAL);
++	dentry_t *hidden_root2 = ERR_PTR(-EINVAL);
++	struct nameidata nd, nd2;
++	char *name, *tmp, *end;
++	int err = 0;
++
++	/* We don't want to go off the end of our arguments later on. */
++	for (end = options; *end; end++);
++
++	while (options < end) {
++		tmp = options;
++		while (*tmp && *tmp != ',')
++			tmp++;
++		*tmp = '\0';
++		if (!strncmp("base=", options, 5)) {
++			name = options + 5;
++			printk(KERN_INFO "mini_fo: using base directory: %s\n", name);
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++			if (path_init(name, LOOKUP_FOLLOW, &nd))
++				err = path_walk(name, &nd);
++#else
++			err = path_lookup(name, LOOKUP_FOLLOW, &nd);
++#endif
++			if (err) {
++				printk(KERN_CRIT "mini_fo: error accessing hidden directory '%s'\n", name);
++				hidden_root = ERR_PTR(err);
++				goto out;
++			}
++			hidden_root = nd.dentry;
++			stopd(sb)->base_dir_dentry = nd.dentry;
++			stopd(sb)->hidden_mnt = nd.mnt;
++
++		} else if(!strncmp("sto=", options, 4)) {
++			/* parse the storage dir */
++			name = options + 4;
++			printk(KERN_INFO "mini_fo: using storage directory: %s\n", name);
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++			if(path_init(name, LOOKUP_FOLLOW, &nd2))
++				err = path_walk(name, &nd2);
++#else
++                        err = path_lookup(name, LOOKUP_FOLLOW, &nd2);
++#endif
++			if(err) {
++				printk(KERN_CRIT "mini_fo: error accessing hidden storage directory '%s'\n", name);
++
++				hidden_root2 = ERR_PTR(err);
++				goto out;
++			}
++			hidden_root2 = nd2.dentry;
++			stopd(sb)->storage_dir_dentry = nd2.dentry;
++			stopd(sb)->hidden_mnt2 = nd2.mnt;
++			stohs2(sb) = hidden_root2->d_sb;
++
++			/* validate storage dir, this is done in
++			 * mini_fo_read_super for the base directory.
++			 */
++			if (IS_ERR(hidden_root2)) {
++				printk(KERN_WARNING "mini_fo_parse_options: storage dentry lookup failed (err = %ld)\n", PTR_ERR(hidden_root2));
++				goto out;
++			}
++			if (!hidden_root2->d_inode) {
++				printk(KERN_WARNING "mini_fo_parse_options: no storage dir to interpose on.\n");
++				goto out;
++			}
++			stohs2(sb) = hidden_root2->d_sb;
++		} else {
++			printk(KERN_WARNING "mini_fo: unrecognized option '%s'\n", options);
++			hidden_root = ERR_PTR(-EINVAL);
++			goto out;
++		}
++		options = tmp + 1;
++	}
++
++ out:
++	if(IS_ERR(hidden_root2))
++		return hidden_root2;
++	return hidden_root;
++}
++
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++static int
++#else
++super_block_t *
++#endif
++mini_fo_read_super(super_block_t *sb, void *raw_data, int silent)
++{
++	dentry_t *hidden_root;
++	int err = 0;
++
++	if (!raw_data) {
++		printk(KERN_WARNING "mini_fo_read_super: missing argument\n");
++		err = -EINVAL;
++		goto out;
++	}
++	/*
++	 * Allocate superblock private data
++	 */
++	__stopd(sb) = kmalloc(sizeof(struct mini_fo_sb_info), GFP_KERNEL);
++	if (!stopd(sb)) {
++		printk(KERN_WARNING "%s: out of memory\n", __FUNCTION__);
++		err = -ENOMEM;
++		goto out;
++	}
++	stohs(sb) = NULL;
++
++	hidden_root = mini_fo_parse_options(sb, raw_data);
++	if (IS_ERR(hidden_root)) {
++		printk(KERN_WARNING "mini_fo_read_super: lookup_dentry failed (err = %ld)\n", PTR_ERR(hidden_root));
++		err = PTR_ERR(hidden_root);
++		goto out_free;
++	}
++	if (!hidden_root->d_inode) {
++		printk(KERN_WARNING "mini_fo_read_super: no directory to interpose on\n");
++		goto out_free;
++	}
++	stohs(sb) = hidden_root->d_sb;
++
++	/*
++	 * Linux 2.4.2-ac3 and beyond has code in
++	 * mm/filemap.c:generic_file_write() that requires sb->s_maxbytes
++	 * to be populated.  If not set, all write()s under that sb will
++	 * return 0.
++	 *
++	 * Linux 2.4.4+ automatically sets s_maxbytes to MAX_NON_LFS;
++	 * the filesystem should override it only if it supports LFS.
++	 */
++	/* non-SCA code is good to go with LFS */
++	sb->s_maxbytes = hidden_root->d_sb->s_maxbytes;
++
++	sb->s_op = &mini_fo_sops;
++	/*
++	 * we can't use d_alloc_root if we want to use
++	 * our own interpose function unchanged,
++	 * so we simply replicate *most* of the code in d_alloc_root here
++	 */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	sb->s_root = d_alloc(NULL, &(const struct qstr) { "/", 1, 0 });
++#else
++	sb->s_root = d_alloc(NULL, &(const struct qstr){hash: 0, name: "/", len : 1});
++#endif
++	if (IS_ERR(sb->s_root)) {
++		printk(KERN_WARNING "mini_fo_read_super: d_alloc failed\n");
++		err = -ENOMEM;
++		goto out_dput;
++	}
++
++	sb->s_root->d_op = &mini_fo_dops;
++	sb->s_root->d_sb = sb;
++	sb->s_root->d_parent = sb->s_root;
++
++	/* link the upper and lower dentries */
++	__dtopd(sb->s_root) = (struct mini_fo_dentry_info *)
++		kmalloc(sizeof(struct mini_fo_dentry_info), GFP_KERNEL);
++	if (!dtopd(sb->s_root)) {
++		err = -ENOMEM;
++		goto out_dput2;
++	}
++	dtopd(sb->s_root)->state = MODIFIED;
++	dtohd(sb->s_root) = hidden_root;
++
++	/* fanout relevant, interpose on storage root dentry too */
++	dtohd2(sb->s_root) = stopd(sb)->storage_dir_dentry;
++
++	/* ...and call tri-interpose to interpose root dir inodes
++	 * if (mini_fo_interpose(hidden_root, sb->s_root, sb, 0))
++	 */
++	if(mini_fo_tri_interpose(hidden_root, dtohd2(sb->s_root), sb->s_root, sb, 0))
++		goto out_dput2;
++
++	/* initalize the wol list */
++	itopd(sb->s_root->d_inode)->deleted_list_size = -1;
++	itopd(sb->s_root->d_inode)->renamed_list_size = -1;
++	meta_build_lists(sb->s_root);
++
++	goto out;
++
++ out_dput2:
++	dput(sb->s_root);
++ out_dput:
++	dput(hidden_root);
++	dput(dtohd2(sb->s_root)); /* release the hidden_sto_dentry too */
++ out_free:
++	kfree(stopd(sb));
++	__stopd(sb) = NULL;
++ out:
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++        return err;
++#else
++        if (err) {
++		return ERR_PTR(err);
++        } else {
++		return sb;
++        }
++#endif
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++static int mini_fo_get_sb(struct file_system_type *fs_type,
++					  int flags, const char *dev_name,
++					  void *raw_data, struct vfsmount *mnt)
++{
++	return get_sb_nodev(fs_type, flags, raw_data, mini_fo_read_super, mnt);
++}
++#else
++static struct super_block *mini_fo_get_sb(struct file_system_type *fs_type,
++					  int flags, const char *dev_name,
++					  void *raw_data)
++{
++	return get_sb_nodev(fs_type, flags, raw_data, mini_fo_read_super);
++}
++#endif
++
++void mini_fo_kill_block_super(struct super_block *sb)
++{
++	generic_shutdown_super(sb);
++	/*
++	 *      XXX: BUG: Halcrow: Things get unstable sometime after this point:
++	 *      lib/rwsem-spinlock.c:127: spin_is_locked on uninitialized
++	 *      fs/fs-writeback.c:402: spin_lock(fs/super.c:a0381828) already
++	 *      locked by fs/fs-writeback.c/402
++	 *
++	 *      Apparently, someone's not releasing a lock on sb_lock...
++	 */
++}
++
++static struct file_system_type mini_fo_fs_type = {
++	.owner          = THIS_MODULE,
++	.name           = "mini_fo",
++	.get_sb         = mini_fo_get_sb,
++	.kill_sb        = mini_fo_kill_block_super,
++	.fs_flags       = 0,
++};
++
++
++#else
++static DECLARE_FSTYPE(mini_fo_fs_type, "mini_fo", mini_fo_read_super, 0);
++#endif
++
++static int __init init_mini_fo_fs(void)
++{
++	printk("Registering mini_fo version $Id$\n");
++	return register_filesystem(&mini_fo_fs_type);
++}
++static void __exit exit_mini_fo_fs(void)
++{
++	printk("Unregistering mini_fo version $Id$\n");
++	unregister_filesystem(&mini_fo_fs_type);
++}
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++EXPORT_NO_SYMBOLS;
++#endif
++
++MODULE_AUTHOR("Erez Zadok <ezk@cs.sunysb.edu>");
++MODULE_DESCRIPTION("FiST-generated mini_fo filesystem");
++MODULE_LICENSE("GPL");
++
++/* MODULE_PARM(fist_debug_var, "i"); */
++/* MODULE_PARM_DESC(fist_debug_var, "Debug level"); */
++
++module_init(init_mini_fo_fs)
++module_exit(exit_mini_fo_fs)
+--- /dev/null
++++ b/fs/mini_fo/Makefile
+@@ -0,0 +1,17 @@
++#
++# Makefile for mini_fo 2.4 and 2.6 Linux kernels
++#
++# Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License
++# as published by the Free Software Foundation; either version
++# 2 of the License, or (at your option) any later version.
++#
++
++obj-$(CONFIG_MINI_FO) := mini_fo.o
++mini_fo-objs   := meta.o dentry.o file.o inode.o main.o super.o state.o aux.o
++
++# dependencies
++${mini_fo-objs}: mini_fo.h fist.h
++
+--- /dev/null
++++ b/fs/mini_fo/meta.c
+@@ -0,0 +1,1000 @@
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif /* HAVE_CONFIG_H */
++#include "fist.h"
++#include "mini_fo.h"
++
++int meta_build_lists(dentry_t *dentry)
++{
++	struct mini_fo_inode_info *inode_info;
++
++	dentry_t *meta_dentry = 0;
++	file_t *meta_file = 0;
++	mm_segment_t old_fs;
++	void *buf;
++
++	int bytes, len;
++	struct vfsmount *meta_mnt;
++	char *entry;
++
++	inode_info = itopd(dentry->d_inode);
++	if(!(inode_info->deleted_list_size == -1 &&
++	     inode_info->renamed_list_size == -1)) {
++		printk(KERN_CRIT "mini_fo: meta_build_lists: \
++                                  Error, list(s) not virgin.\n");
++		return -1;
++	}
++
++	/* init our meta lists */
++	INIT_LIST_HEAD(&inode_info->deleted_list);
++	inode_info->deleted_list_size = 0;
++
++	INIT_LIST_HEAD(&inode_info->renamed_list);
++	inode_info->renamed_list_size = 0;
++
++  	/* might there be a META-file? */
++	if(dtohd2(dentry) && dtohd2(dentry)->d_inode) {
++		meta_dentry = lookup_one_len(META_FILENAME,
++					     dtohd2(dentry),
++					     strlen(META_FILENAME));
++		if(!meta_dentry->d_inode) {
++			dput(meta_dentry);
++			goto out_ok;
++		}
++		/* $%& err, is this correct? */
++		meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++		mntget(meta_mnt);
++
++
++		/* open META-file for reading */
++		meta_file = dentry_open(meta_dentry, meta_mnt, 0x0);
++		if(!meta_file || IS_ERR(meta_file)) {
++			printk(KERN_CRIT "mini_fo: meta_build_lists: \
++                                          ERROR opening META file.\n");
++			goto out_err;
++		}
++
++		/* check if fs supports reading */
++		if(!meta_file->f_op->read) {
++			printk(KERN_CRIT "mini_fo: meta_build_lists: \
++                                          ERROR, fs does not support reading.\n");
++			goto out_err_close;
++		}
++
++		/* allocate a page for transfering the data */
++		buf = (void *) __get_free_page(GFP_KERNEL);
++		if(!buf) {
++			printk(KERN_CRIT "mini_fo: meta_build_lists: \
++                                          ERROR, out of mem.\n");
++			goto out_err_close;
++		}
++		meta_file->f_pos = 0;
++		old_fs = get_fs();
++		set_fs(KERNEL_DS);
++		do {
++			char *c;
++			bytes = meta_file->f_op->read(meta_file, buf, PAGE_SIZE, &meta_file->f_pos);
++			if(bytes == PAGE_SIZE) {
++				/* trim a cut off filename and adjust f_pos to get it next time */
++				for(c = (char*) buf+PAGE_SIZE;
++				    *c != '\n';
++				    c--, bytes--, meta_file->f_pos--);
++			}
++			entry = (char *) buf;
++			while(entry < (char *) buf+bytes) {
++
++				char *old_path;
++				char *dir_name;
++				int old_len, new_len;
++
++				/* len without '\n'*/
++				len = (int) (strchr(entry, '\n') - entry);
++				switch (*entry) {
++				case 'D':
++					/* format: "D filename" */
++					meta_list_add_d_entry(dentry,
++							      entry+2,
++							      len-2);
++					break;
++				case 'R':
++					/* format: "R path/xy/dir newDir" */
++					old_path = entry+2;
++					dir_name = strchr(old_path, ' ') + 1;
++					old_len =  dir_name - old_path - 1;
++					new_len = ((int) entry) + len - ((int ) dir_name);
++					meta_list_add_r_entry(dentry,
++							      old_path,
++							      old_len,
++							      dir_name,
++							      new_len);
++					break;
++				default:
++					/* unknown entry type detected */
++					break;
++				}
++				entry += len+1;
++			}
++
++		} while(meta_file->f_pos < meta_dentry->d_inode->i_size);
++
++		free_page((unsigned long) buf);
++		set_fs(old_fs);
++		fput(meta_file);
++	}
++	goto out_ok;
++
++ out_err_close:
++	fput(meta_file);
++ out_err:
++	mntput(meta_mnt);
++	dput(meta_dentry);
++	return -1;
++ out_ok:
++	return 1; /* check this!!! inode_info->wol_size; */
++}
++
++/* cleanups up all lists and free's the mem by dentry */
++int meta_put_lists(dentry_t *dentry)
++{
++	if(!dentry || !dentry->d_inode) {
++		printk("mini_fo: meta_put_lists: invalid dentry passed.\n");
++		return -1;
++	}
++	return __meta_put_lists(dentry->d_inode);
++}
++
++/* cleanups up all lists and free's the mem by inode */
++int __meta_put_lists(inode_t *inode)
++{
++	int err = 0;
++	if(!inode || !itopd(inode)) {
++		printk("mini_fo: __meta_put_lists: invalid inode passed.\n");
++		return -1;
++	}
++	err = __meta_put_d_list(inode);
++	err |= __meta_put_r_list(inode);
++	return err;
++}
++
++int meta_sync_lists(dentry_t *dentry)
++{
++	int err = 0;
++	if(!dentry || !dentry->d_inode) {
++		printk("mini_fo: meta_sync_lists: \
++                        invalid dentry passed.\n");
++		return -1;
++	}
++	err = meta_sync_d_list(dentry, 0);
++	err |= meta_sync_r_list(dentry, 1);
++	return err;
++}
++
++
++/* remove all D entries from the renamed list and free the mem */
++int __meta_put_d_list(inode_t *inode)
++{
++	struct list_head *tmp;
++        struct deleted_entry *del_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode)) {
++		printk(KERN_CRIT "mini_fo: __meta_put_d_list: \
++                                  invalid inode passed.\n");
++		return -1;
++	}
++	inode_info = itopd(inode);
++
++        /* nuke the DELETED-list */
++        if(inode_info->deleted_list_size <= 0)
++		return 0;
++
++	while(!list_empty(&inode_info->deleted_list)) {
++		tmp = inode_info->deleted_list.next;
++		list_del(tmp);
++		del_entry = list_entry(tmp, struct deleted_entry, list);
++		kfree(del_entry->name);
++		kfree(del_entry);
++	}
++	inode_info->deleted_list_size = 0;
++
++	return 0;
++}
++
++/* remove all R entries from the renamed list and free the mem */
++int __meta_put_r_list(inode_t *inode)
++{
++	struct list_head *tmp;
++	struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode)) {
++		printk(KERN_CRIT "mini_fo: meta_put_r_list: invalid inode.\n");
++		return -1;
++	}
++	inode_info = itopd(inode);
++
++        /* nuke the RENAMED-list */
++        if(inode_info->renamed_list_size <= 0)
++		return 0;
++
++	while(!list_empty(&inode_info->renamed_list)) {
++		tmp = inode_info->renamed_list.next;
++		list_del(tmp);
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		kfree(ren_entry->new_name);
++		kfree(ren_entry->old_name);
++		kfree(ren_entry);
++	}
++	inode_info->renamed_list_size = 0;
++
++	return 0;
++}
++
++int meta_add_d_entry(dentry_t *dentry, const char *name, int len)
++{
++	int err = 0;
++	err = meta_list_add_d_entry(dentry, name, len);
++	err |= meta_write_d_entry(dentry,name,len);
++	return err;
++}
++
++/* add a D entry to the deleted list */
++int meta_list_add_d_entry(dentry_t *dentry, const char *name, int len)
++{
++        struct deleted_entry *del_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_list_add_d_entry: \
++                                  invalid dentry passed.\n");
++		return -1;
++	}
++	inode_info = itopd(dentry->d_inode);
++
++        if(inode_info->deleted_list_size < 0)
++                return -1;
++
++        del_entry = (struct deleted_entry *)
++		kmalloc(sizeof(struct deleted_entry), GFP_KERNEL);
++        del_entry->name = (char*) kmalloc(len, GFP_KERNEL);
++        if(!del_entry || !del_entry->name) {
++                printk(KERN_CRIT "mini_fo: meta_list_add_d_entry: \
++                                  out of mem.\n");
++		kfree(del_entry->name);
++		kfree(del_entry);
++                return -ENOMEM;
++        }
++
++        strncpy(del_entry->name, name, len);
++        del_entry->len = len;
++
++        list_add(&del_entry->list, &inode_info->deleted_list);
++        inode_info->deleted_list_size++;
++        return 0;
++}
++
++int meta_add_r_entry(dentry_t *dentry,
++			  const char *old_name, int old_len,
++			  const char *new_name, int new_len)
++{
++	int err = 0;
++	err = meta_list_add_r_entry(dentry,
++				    old_name, old_len,
++				    new_name, new_len);
++	err |= meta_write_r_entry(dentry,
++				  old_name, old_len,
++				  new_name, new_len);
++	return err;
++}
++
++/* add a R entry to the renamed list */
++int meta_list_add_r_entry(dentry_t *dentry,
++			  const char *old_name, int old_len,
++			  const char *new_name, int new_len)
++{
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_list_add_r_entry: \
++                                  invalid dentry passed.\n");
++		return -1;
++	}
++	inode_info = itopd(dentry->d_inode);
++
++        if(inode_info->renamed_list_size < 0)
++                return -1;
++
++        ren_entry = (struct renamed_entry *)
++		kmalloc(sizeof(struct renamed_entry), GFP_KERNEL);
++        ren_entry->old_name = (char*) kmalloc(old_len, GFP_KERNEL);
++        ren_entry->new_name = (char*) kmalloc(new_len, GFP_KERNEL);
++
++        if(!ren_entry || !ren_entry->old_name || !ren_entry->new_name) {
++                printk(KERN_CRIT "mini_fo: meta_list_add_r_entry: \
++                                  out of mem.\n");
++		kfree(ren_entry->new_name);
++		kfree(ren_entry->old_name);
++		kfree(ren_entry);
++                return -ENOMEM;
++        }
++
++        strncpy(ren_entry->old_name, old_name, old_len);
++        ren_entry->old_len = old_len;
++        strncpy(ren_entry->new_name, new_name, new_len);
++        ren_entry->new_len = new_len;
++
++        list_add(&ren_entry->list, &inode_info->renamed_list);
++        inode_info->renamed_list_size++;
++        return 0;
++}
++
++
++int meta_remove_r_entry(dentry_t *dentry, const char *name, int len)
++{
++	int err = 0;
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT
++		       "mini_fo: meta_remove_r_entry: \
++                        invalid dentry passed.\n");
++		return -1;
++	}
++
++	err = meta_list_remove_r_entry(dentry, name, len);
++	err |= meta_sync_lists(dentry);
++	return err;
++}
++
++int meta_list_remove_r_entry(dentry_t *dentry, const char *name, int len)
++{
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT
++		       "mini_fo: meta_list_remove_r_entry: \
++                        invalid dentry passed.\n");
++		return -1;
++	}
++	return __meta_list_remove_r_entry(dentry->d_inode, name, len);
++}
++
++int __meta_list_remove_r_entry(inode_t *inode, const char *name, int len)
++{
++	struct list_head *tmp;
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode))
++		printk(KERN_CRIT
++		       "mini_fo: __meta_list_remove_r_entry: \
++                        invalid inode passed.\n");
++	inode_info = itopd(inode);
++
++        if(inode_info->renamed_list_size < 0)
++                return -1;
++        if(inode_info->renamed_list_size == 0)
++                return 1;
++
++	list_for_each(tmp, &inode_info->renamed_list) {
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		if(ren_entry->new_len != len)
++			continue;
++
++		if(!strncmp(ren_entry->new_name, name, len)) {
++			list_del(tmp);
++			kfree(ren_entry->new_name);
++			kfree(ren_entry->old_name);
++			kfree(ren_entry);
++			inode_info->renamed_list_size--;
++			return 0;
++		}
++	}
++	return 1;
++}
++
++
++/* append a single D entry to the meta file */
++int meta_write_d_entry(dentry_t *dentry, const char *name, int len)
++{
++	dentry_t *meta_dentry = 0;
++        file_t *meta_file = 0;
++        mm_segment_t old_fs;
++
++        int bytes, err;
++        struct vfsmount *meta_mnt = 0;
++        char *buf;
++
++	err = 0;
++
++	if(itopd(dentry->d_inode)->deleted_list_size < 0) {
++		err = -1;
++		goto out;
++	}
++
++	if(dtopd(dentry)->state == UNMODIFIED) {
++                err = build_sto_structure(dentry->d_parent, dentry);
++                if(err) {
++                        printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                          build_sto_structure failed.\n");
++			goto out;
++                }
++        }
++	meta_dentry = lookup_one_len(META_FILENAME,
++				     dtohd2(dentry), strlen (META_FILENAME));
++
++	/* We need to create a META-file */
++        if(!meta_dentry->d_inode) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry,
++			   S_IRUSR | S_IWUSR,
++			   NULL);
++#else
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry,
++			   S_IRUSR | S_IWUSR);
++#endif
++	}
++        /* open META-file for writing */
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        if(!meta_file || IS_ERR(meta_file)) {
++                printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                  ERROR opening meta file.\n");
++                mntput(meta_mnt); /* $%& is this necessary? */
++                dput(meta_dentry);
++		err = -1;
++                goto out;
++        }
++
++        /* check if fs supports writing */
++        if(!meta_file->f_op->write) {
++                printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                  ERROR, fs does not support writing.\n");
++                goto out_err_close;
++        }
++
++	meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */
++        old_fs = get_fs();
++        set_fs(KERNEL_DS);
++
++	/* size: len for name, 1 for \n and 2 for "D " */
++	buf = (char *) kmalloc(len+3, GFP_KERNEL);
++	if (!buf) {
++		printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                  out of mem.\n");
++		return -ENOMEM;
++	}
++
++	buf[0] = 'D';
++	buf[1] = ' ';
++	strncpy(buf+2, name, len);
++	buf[len+2] = '\n';
++	bytes = meta_file->f_op->write(meta_file, buf, len+3,
++				       &meta_file->f_pos);
++	if(bytes != len+3) {
++		printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                  ERROR writing.\n");
++		err = -1;
++	}
++	kfree(buf);
++	set_fs(old_fs);
++
++ out_err_close:
++	fput(meta_file);
++ out:
++	return err;
++}
++
++/* append a single R entry to the meta file */
++int meta_write_r_entry(dentry_t *dentry,
++		       const char *old_name, int old_len,
++		       const char *new_name, int new_len)
++{
++	dentry_t *meta_dentry = 0;
++        file_t *meta_file = 0;
++        mm_segment_t old_fs;
++
++        int bytes, err, buf_len;
++	struct vfsmount *meta_mnt = 0;
++        char *buf;
++
++
++	err = 0;
++
++	if(itopd(dentry->d_inode)->renamed_list_size < 0) {
++		err = -1;
++		goto out;
++	}
++
++	/* build the storage structure? */
++	if(dtopd(dentry)->state == UNMODIFIED) {
++                err = build_sto_structure(dentry->d_parent, dentry);
++                if(err) {
++                        printk(KERN_CRIT "mini_fo: meta_write_r_entry: \
++                                          build_sto_structure failed.\n");
++			goto out;
++                }
++        }
++	meta_dentry = lookup_one_len(META_FILENAME,
++				     dtohd2(dentry),
++				     strlen (META_FILENAME));
++        if(!meta_dentry->d_inode) {
++                /* We need to create a META-file */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR, NULL);
++#else
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR);
++#endif
++	}
++        /* open META-file for writing */
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        if(!meta_file || IS_ERR(meta_file)) {
++                printk(KERN_CRIT "mini_fo: meta_write_r_entry: \
++                                  ERROR opening meta file.\n");
++                mntput(meta_mnt);
++                dput(meta_dentry);
++		err = -1;
++                goto out;
++        }
++
++        /* check if fs supports writing */
++        if(!meta_file->f_op->write) {
++                printk(KERN_CRIT "mini_fo: meta_write_r_entry: \
++                                  ERROR, fs does not support writing.\n");
++                goto out_err_close;
++        }
++
++	meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */
++        old_fs = get_fs();
++        set_fs(KERNEL_DS);
++
++	/* size: 2 for "R ", old_len+new_len for names, 1 blank+1 \n */
++	buf_len = old_len + new_len + 4;
++	buf = (char *) kmalloc(buf_len, GFP_KERNEL);
++	if (!buf) {
++		printk(KERN_CRIT "mini_fo: meta_write_r_entry: out of mem.\n");
++		return -ENOMEM;
++	}
++
++	buf[0] = 'R';
++	buf[1] = ' ';
++	strncpy(buf + 2, old_name, old_len);
++	buf[old_len + 2] = ' ';
++	strncpy(buf + old_len + 3, new_name, new_len);
++	buf[buf_len -1] = '\n';
++	bytes = meta_file->f_op->write(meta_file, buf, buf_len, &meta_file->f_pos);
++	if(bytes != buf_len) {
++		printk(KERN_CRIT "mini_fo: meta_write_r_entry: ERROR writing.\n");
++		err = -1;
++	}
++
++	kfree(buf);
++	set_fs(old_fs);
++
++ out_err_close:
++	fput(meta_file);
++ out:
++	return err;
++}
++
++/* sync D list to disk, append data if app_flag is 1 */
++/* check the meta_mnt, which seems not to be used (properly)  */
++
++int meta_sync_d_list(dentry_t *dentry, int app_flag)
++{
++	dentry_t *meta_dentry;
++        file_t *meta_file;
++        mm_segment_t old_fs;
++
++        int bytes, err;
++        struct vfsmount *meta_mnt;
++        char *buf;
++
++	struct list_head *tmp;
++        struct deleted_entry *del_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	err = 0;
++	meta_file=0;
++	meta_mnt=0;
++
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                  invalid inode passed.\n");
++		err = -1;
++		goto out;
++	}
++	inode_info = itopd(dentry->d_inode);
++
++        if(inode_info->deleted_list_size < 0) {
++		err = -1;
++		goto out;
++	}
++
++	/* ok, there is something to sync */
++
++	/* build the storage structure? */
++        if(!dtohd2(dentry) && !itohi2(dentry->d_inode)) {
++                err = build_sto_structure(dentry->d_parent, dentry);
++                if(err) {
++                        printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                          build_sto_structure failed.\n");
++			goto out;
++                }
++        }
++	meta_dentry = lookup_one_len(META_FILENAME,
++				     dtohd2(dentry),
++				     strlen(META_FILENAME));
++        if(!meta_dentry->d_inode) {
++                /* We need to create a META-file */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR, NULL);
++#else
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR);
++#endif
++		app_flag = 0;
++	}
++	/* need we truncate the meta file? */
++	if(!app_flag) {
++		struct iattr newattrs;
++                newattrs.ia_size = 0;
++                newattrs.ia_valid = ATTR_SIZE | ATTR_CTIME;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&meta_dentry->d_inode->i_mutex);
++#else
++                down(&meta_dentry->d_inode->i_sem);
++#endif
++                err = notify_change(meta_dentry, &newattrs);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&meta_dentry->d_inode->i_mutex);
++#else
++                up(&meta_dentry->d_inode->i_sem);
++#endif
++
++                if(err || meta_dentry->d_inode->i_size != 0) {
++                        printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                          ERROR truncating meta file.\n");
++                        goto out_err_close;
++		}
++	}
++
++        /* open META-file for writing */
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        if(!meta_file || IS_ERR(meta_file)) {
++                printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                  ERROR opening meta file.\n");
++		/* we don't mntget so we dont't mntput (for now)
++		 * mntput(meta_mnt);
++		 */
++		dput(meta_dentry);
++		err = -1;
++                goto out;
++        }
++
++        /* check if fs supports writing */
++        if(!meta_file->f_op->write) {
++                printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                  ERROR, fs does not support writing.\n");
++                goto out_err_close;
++        }
++
++	meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */
++        old_fs = get_fs();
++        set_fs(KERNEL_DS);
++
++	/* here we go... */
++        list_for_each(tmp, &inode_info->deleted_list) {
++		del_entry = list_entry(tmp, struct deleted_entry, list);
++
++		/* size: len for name, 1 for \n and 2 for "D " */
++		buf = (char *) kmalloc(del_entry->len+3, GFP_KERNEL);
++		if (!buf) {
++			printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                          out of mem.\n");
++			return -ENOMEM;
++		}
++
++		buf[0] = 'D';
++		buf[1] = ' ';
++		strncpy(buf+2, del_entry->name, del_entry->len);
++		buf[del_entry->len+2] = '\n';
++		bytes = meta_file->f_op->write(meta_file, buf,
++					       del_entry->len+3,
++					       &meta_file->f_pos);
++		if(bytes != del_entry->len+3) {
++			printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                          ERROR writing.\n");
++			err |= -1;
++		}
++		kfree(buf);
++	}
++	set_fs(old_fs);
++
++ out_err_close:
++	fput(meta_file);
++ out:
++	return err;
++
++}
++
++int meta_sync_r_list(dentry_t *dentry, int app_flag)
++{
++	dentry_t *meta_dentry;
++        file_t *meta_file;
++        mm_segment_t old_fs;
++
++        int bytes, err, buf_len;
++        struct vfsmount *meta_mnt;
++        char *buf;
++
++	struct list_head *tmp;
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	err = 0;
++	meta_file=0;
++	meta_mnt=0;
++
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                  invalid dentry passed.\n");
++		err = -1;
++		goto out;
++	}
++	inode_info = itopd(dentry->d_inode);
++
++        if(inode_info->deleted_list_size < 0) {
++		err = -1;
++		goto out;
++	}
++
++	/* ok, there is something to sync */
++
++	/* build the storage structure? */
++        if(!dtohd2(dentry) && !itohi2(dentry->d_inode)) {
++                err = build_sto_structure(dentry->d_parent, dentry);
++                if(err) {
++                        printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                          build_sto_structure failed.\n");
++			goto out;
++                }
++        }
++	meta_dentry = lookup_one_len(META_FILENAME,
++				     dtohd2(dentry),
++				     strlen(META_FILENAME));
++        if(!meta_dentry->d_inode) {
++                /* We need to create a META-file */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR, NULL);
++#else
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR);
++#endif
++		app_flag = 0;
++	}
++	/* need we truncate the meta file? */
++	if(!app_flag) {
++		struct iattr newattrs;
++                newattrs.ia_size = 0;
++                newattrs.ia_valid = ATTR_SIZE | ATTR_CTIME;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&meta_dentry->d_inode->i_mutex);
++#else
++                down(&meta_dentry->d_inode->i_sem);
++#endif
++                err = notify_change(meta_dentry, &newattrs);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&meta_dentry->d_inode->i_mutex);
++#else
++                up(&meta_dentry->d_inode->i_sem);
++#endif
++                if(err || meta_dentry->d_inode->i_size != 0) {
++                        printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                          ERROR truncating meta file.\n");
++                        goto out_err_close;
++		}
++	}
++
++        /* open META-file for writing */
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        if(!meta_file || IS_ERR(meta_file)) {
++                printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                  ERROR opening meta file.\n");
++		/* we don't mntget so we dont't mntput (for now)
++		 * mntput(meta_mnt);
++		 */
++		dput(meta_dentry);
++		err = -1;
++                goto out;
++        }
++
++        /* check if fs supports writing */
++        if(!meta_file->f_op->write) {
++                printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                  ERROR, fs does not support writing.\n");
++                goto out_err_close;
++        }
++
++	meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */
++        old_fs = get_fs();
++        set_fs(KERNEL_DS);
++
++	/* here we go... */
++        list_for_each(tmp, &inode_info->renamed_list) {
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		/* size:
++		 * 2 for "R ", old_len+new_len for names, 1 blank+1 \n */
++		buf_len = ren_entry->old_len + ren_entry->new_len + 4;
++		buf = (char *) kmalloc(buf_len, GFP_KERNEL);
++		if (!buf) {
++			printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                          out of mem.\n");
++			return -ENOMEM;
++		}
++		buf[0] = 'R';
++		buf[1] = ' ';
++		strncpy(buf + 2, ren_entry->old_name, ren_entry->old_len);
++		buf[ren_entry->old_len + 2] = ' ';
++		strncpy(buf + ren_entry->old_len + 3,
++			ren_entry->new_name, ren_entry->new_len);
++		buf[buf_len - 1] = '\n';
++		bytes = meta_file->f_op->write(meta_file, buf,
++					       buf_len, &meta_file->f_pos);
++		if(bytes != buf_len) {
++			printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                          ERROR writing.\n");
++			err |= -1;
++		}
++		kfree(buf);
++	}
++	set_fs(old_fs);
++
++ out_err_close:
++	fput(meta_file);
++ out:
++	return err;
++}
++
++int meta_check_d_entry(dentry_t *dentry, const char *name, int len)
++{
++	if(!dentry || !dentry->d_inode)
++		printk(KERN_CRIT "mini_fo: meta_check_d_dentry: \
++                                  invalid dentry passed.\n");
++	return __meta_check_d_entry(dentry->d_inode, name, len);
++}
++
++int __meta_check_d_entry(inode_t *inode, const char *name, int len)
++{
++	struct list_head *tmp;
++        struct deleted_entry *del_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode))
++		printk(KERN_CRIT "mini_fo: __meta_check_d_dentry: \
++                                  invalid inode passed.\n");
++
++        inode_info = itopd(inode);
++
++        if(inode_info->deleted_list_size <= 0)
++                return 0;
++
++        list_for_each(tmp, &inode_info->deleted_list) {
++		del_entry = list_entry(tmp, struct deleted_entry, list);
++		if(del_entry->len != len)
++			continue;
++
++		if(!strncmp(del_entry->name, name, len))
++			return 1;
++	}
++	return 0;
++}
++
++/*
++ * check if file has been renamed and return path to orig. base dir.
++ * Implements no error return values so far, what of course sucks.
++ * String is null terminated.'
++ */
++char* meta_check_r_entry(dentry_t *dentry, const char *name, int len)
++{
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_check_r_dentry: \
++                                  invalid dentry passed.\n");
++		return NULL;
++	}
++	return __meta_check_r_entry(dentry->d_inode, name, len);
++}
++
++char* __meta_check_r_entry(inode_t *inode, const char *name, int len)
++{
++	struct list_head *tmp;
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++	char *old_path;
++
++	if(!inode || !itopd(inode)) {
++		printk(KERN_CRIT "mini_fo: meta_check_r_dentry: \
++                                  invalid inode passed.\n");
++		return NULL;
++	}
++	inode_info = itopd(inode);
++
++        if(inode_info->renamed_list_size <= 0)
++                return NULL;
++
++        list_for_each(tmp, &inode_info->renamed_list) {
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		if(ren_entry->new_len != len)
++			continue;
++
++		if(!strncmp(ren_entry->new_name, name, len)) {
++			old_path = (char *)
++				kmalloc(ren_entry->old_len+1, GFP_KERNEL);
++			strncpy(old_path,
++				ren_entry->old_name,
++				ren_entry->old_len);
++			old_path[ren_entry->old_len]='\0';
++			return old_path;
++		}
++	}
++	return NULL;
++}
++
++/*
++ * This version only checks if entry exists and return:
++ *     1 if exists,
++ *     0 if not,
++ *    -1 if error.
++ */
++int meta_is_r_entry(dentry_t *dentry, const char *name, int len)
++{
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_check_r_dentry [2]: \
++                                  invalid dentry passed.\n");
++		return -1;
++	}
++	return __meta_is_r_entry(dentry->d_inode, name, len);
++}
++
++int __meta_is_r_entry(inode_t *inode, const char *name, int len)
++{
++	struct list_head *tmp;
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode)) {
++		printk(KERN_CRIT "mini_fo: meta_check_r_dentry [2]: \
++                                  invalid inode passed.\n");
++		return -1;
++	}
++	inode_info = itopd(inode);
++
++        if(inode_info->renamed_list_size <= 0)
++                return -1;
++
++        list_for_each(tmp, &inode_info->renamed_list) {
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		if(ren_entry->new_len != len)
++			continue;
++
++		if(!strncmp(ren_entry->new_name, name, len))
++			return 1;
++	}
++	return 0;
++}
++
+--- /dev/null
++++ b/fs/mini_fo/mini_fo.h
+@@ -0,0 +1,510 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifndef __MINI_FO_H_
++#define __MINI_FO_H_
++
++#ifdef __KERNEL__
++
++/* META stuff */
++#define META_FILENAME "META_dAfFgHE39ktF3HD2sr"
++
++/* use xattrs? */
++#define XATTR
++
++/* File attributes that when changed, result in a file beeing copied to storage */
++#define COPY_FLAGS ATTR_MODE | ATTR_UID | ATTR_GID | ATTR_SIZE
++
++/*
++ * mini_fo filestates
++ */
++#define MODIFIED       1
++#define UNMODIFIED     2
++#define CREATED        3
++#define DEL_REWRITTEN  4
++#define DELETED        5
++#define NON_EXISTANT   6
++
++/* fist file systems superblock magic */
++# define MINI_FO_SUPER_MAGIC 0xf15f
++
++/*
++ * STRUCTURES:
++ */
++
++/* mini_fo inode data in memory */
++struct mini_fo_inode_info {
++	inode_t *wii_inode;
++	inode_t *wii_inode2; /* pointer to storage inode */
++
++	/* META-data lists */
++	/* deleted list, ex wol */
++	struct list_head deleted_list;
++	int deleted_list_size;
++
++	/* renamed list */
++	struct list_head renamed_list;
++	int renamed_list_size;
++
++	/* add other lists here ... */
++};
++
++/* mini_fo dentry data in memory */
++struct mini_fo_dentry_info {
++	dentry_t *wdi_dentry;
++	dentry_t *wdi_dentry2; /* pointer to  storage dentry */
++	unsigned int state;  /* state of the mini_fo dentry */
++};
++
++
++/* mini_fo super-block data in memory */
++struct mini_fo_sb_info {
++	super_block_t *wsi_sb, *wsi_sb2; /* mk: might point to the same sb */
++	struct vfsmount *hidden_mnt, *hidden_mnt2;
++	dentry_t *base_dir_dentry;
++	dentry_t *storage_dir_dentry;
++	;
++};
++
++/* readdir_data, readdir helper struct */
++struct readdir_data {
++	struct list_head ndl_list; /* linked list head ptr */
++	int ndl_size; /* list size */
++	int sto_done; /* flag to show that the storage dir entries have
++		       * all been read an now follow base entries */
++};
++
++/* file private data. */
++struct mini_fo_file_info {
++	struct file *wfi_file;
++	struct file *wfi_file2; /* pointer to storage file */
++	struct readdir_data rd;
++};
++
++/* struct ndl_entry */
++struct ndl_entry {
++	struct list_head list;
++	char *name;
++	int len;
++};
++
++/********************************
++ *  META-data structures
++ ********************************/
++
++/* deleted entry */
++struct deleted_entry {
++	struct list_head list;
++	char *name;
++	int len;
++};
++
++/* renamed entry */
++struct renamed_entry {
++	struct list_head list;
++	char *old_name;     /* old directory with full path */
++	int old_len;        /* length of above string */
++	char *new_name;     /* new directory name */
++	int new_len;        /* length of above string */
++};
++
++/* attr_change entry */
++struct attr_change_entry {
++	struct list_head list;
++	char *name;
++	int len;
++};
++
++/* link entry */
++struct link_entry {
++	struct list_head list;
++	int links_moved;
++	int inum_base;
++	int inum_sto;
++	char *weird_name;
++	int weird_name_len;
++};
++
++
++/* Some other stuff required for mini_fo_filldir64, copied from
++ * fs/readdir.c
++ */
++
++#define ROUND_UP64(x) (((x)+sizeof(u64)-1) & ~(sizeof(u64)-1))
++#define NAME_OFFSET(de) ((int) ((de)->d_name - (char *) (de)))
++
++
++struct linux_dirent64 {
++        u64             d_ino;
++        s64             d_off;
++        unsigned short  d_reclen;
++        unsigned char   d_type;
++        char            d_name[0];
++};
++
++
++struct getdents_callback64 {
++        struct linux_dirent64 * current_dir;
++        struct linux_dirent64 * previous;
++        int count;
++        int error;
++};
++
++struct linux_dirent {
++	unsigned long   d_ino;
++	unsigned long   d_off;
++	unsigned short  d_reclen;
++	char            d_name[1];
++};
++
++struct getdents_callback {
++	struct linux_dirent * current_dir;
++	struct linux_dirent * previous;
++	int count;
++	int error;
++};
++
++
++/*
++ * MACROS:
++ */
++
++/* file TO private_data */
++# define ftopd(file) ((struct mini_fo_file_info *)((file)->private_data))
++# define __ftopd(file) ((file)->private_data)
++/* file TO hidden_file */
++# define ftohf(file) ((ftopd(file))->wfi_file)
++# define ftohf2(file) ((ftopd(file))->wfi_file2)
++
++/* inode TO private_data */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++# define itopd(ino) ((struct mini_fo_inode_info *)(ino)->i_private)
++# define __itopd(ino) ((ino)->i_private)
++#else
++# define itopd(ino) ((struct mini_fo_inode_info *)(ino)->u.generic_ip)
++# define __itopd(ino) ((ino)->u.generic_ip)
++#endif
++/* inode TO hidden_inode */
++# define itohi(ino) (itopd(ino)->wii_inode)
++# define itohi2(ino) (itopd(ino)->wii_inode2)
++
++/* superblock TO private_data */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++# define stopd(super) ((struct mini_fo_sb_info *)(super)->s_fs_info)
++# define __stopd(super) ((super)->s_fs_info)
++#else
++# define stopd(super) ((struct mini_fo_sb_info *)(super)->u.generic_sbp)
++# define __stopd(super) ((super)->u.generic_sbp)
++#endif
++
++/* unused? # define vfs2priv stopd */
++/* superblock TO hidden_superblock */
++
++# define stohs(super) (stopd(super)->wsi_sb)
++# define stohs2(super) (stopd(super)->wsi_sb2)
++
++/* dentry TO private_data */
++# define dtopd(dentry) ((struct mini_fo_dentry_info *)(dentry)->d_fsdata)
++# define __dtopd(dentry) ((dentry)->d_fsdata)
++/* dentry TO hidden_dentry */
++# define dtohd(dent) (dtopd(dent)->wdi_dentry)
++# define dtohd2(dent) (dtopd(dent)->wdi_dentry2)
++
++/* dentry to state */
++# define dtost(dent) (dtopd(dent)->state)
++# define sbt(sb) ((sb)->s_type->name)
++
++#define IS_WRITE_FLAG(flag) (flag & (O_RDWR | O_WRONLY | O_APPEND))
++#define IS_COPY_FLAG(flag) (flag & (COPY_FLAGS))
++
++/* macros to simplify non-SCA code */
++#  define MALLOC_PAGE_POINTERS(hidden_pages, num_hidden_pages)
++#  define MALLOC_PAGEDATA_POINTERS(hidden_pages_data, num_hidden_pages)
++#  define FREE_PAGE_POINTERS(hidden_pages, num)
++#  define FREE_PAGEDATA_POINTERS(hidden_pages_data, num)
++#  define FOR_EACH_PAGE
++#  define CURRENT_HIDDEN_PAGE hidden_page
++#  define CURRENT_HIDDEN_PAGEDATA hidden_page_data
++#  define CURRENT_HIDDEN_PAGEINDEX page->index
++
++/*
++ * EXTERNALS:
++ */
++extern struct file_operations mini_fo_main_fops;
++extern struct file_operations mini_fo_dir_fops;
++extern struct inode_operations mini_fo_main_iops;
++extern struct inode_operations mini_fo_dir_iops;
++extern struct inode_operations mini_fo_symlink_iops;
++extern struct super_operations mini_fo_sops;
++extern struct dentry_operations mini_fo_dops;
++extern struct vm_operations_struct mini_fo_shared_vmops;
++extern struct vm_operations_struct mini_fo_private_vmops;
++extern struct address_space_operations mini_fo_aops;
++
++#if 0 /* unused by mini_fo */
++extern int mini_fo_interpose(dentry_t *hidden_dentry, dentry_t *this_dentry, super_block_t *sb, int flag);
++#if defined(FIST_FILTER_DATA) || defined(FIST_FILTER_SCA)
++extern page_t *mini_fo_get1page(file_t *file, int index);
++extern int mini_fo_fill_zeros(file_t *file, page_t *page, unsigned from);
++# endif /* FIST_FILTER_DATA || FIST_FILTER_SCA */
++
++
++#  define mini_fo_hidden_dentry(d) __mini_fo_hidden_dentry(__FILE__,__FUNCTION__,__LINE__,(d))
++#  define mini_fo_hidden_sto_dentry(d) __mini_fo_hidden_sto_dentry(__FILE__,__FUNCTION__,__LINE__,(d))
++
++extern dentry_t *__mini_fo_hidden_dentry(char *file, char *func, int line, dentry_t *this_dentry);
++extern dentry_t *__mini_fo_hidden_sto_dentry(char *file, char *func, int line, dentry_t *this_dentry);
++
++extern int mini_fo_read_file(const char *filename, void *buf, int len);
++extern int mini_fo_write_file(const char *filename, void *buf, int len);
++extern dentry_t *fist_lookup(dentry_t *dir, const char *name, vnode_t **out, uid_t uid, gid_t gid);
++#endif /* unused by mini_fo */
++
++/* state transition functions */
++extern int nondir_unmod_to_mod(dentry_t *dentry, int cp_flag);
++extern int nondir_del_rew_to_del(dentry_t *dentry);
++extern int nondir_creat_to_del(dentry_t *dentry);
++extern int nondir_mod_to_del(dentry_t *dentry);
++extern int nondir_unmod_to_del(dentry_t *dentry);
++
++extern int dir_unmod_to_mod(dentry_t *dentry);
++
++/* rename specials */
++extern int rename_directory(inode_t *old_dir, dentry_t *old_dentry, inode_t *new_dir, dentry_t *new_dentry);
++extern int rename_nondir(inode_t *old_dir, dentry_t *old_dentry, inode_t *new_dir, dentry_t *new_dentry);
++
++/* misc stuff */
++extern int mini_fo_tri_interpose(dentry_t *hidden_dentry,
++				 dentry_t *hidden_sto_dentry,
++				 dentry_t *dentry,
++				 super_block_t *sb, int flag);
++
++extern int mini_fo_cp_cont(dentry_t *tgt_dentry, struct vfsmount *tgt_mnt,
++			   dentry_t *src_dentry, struct vfsmount *src_mnt);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++extern int mini_fo_create(inode_t *dir, dentry_t *dentry, int mode, struct nameidata *nd);
++
++extern int create_sto_nod(dentry_t *dentry, int mode, dev_t dev);
++extern int create_sto_reg_file(dentry_t *dentry, int mode, struct nameidata *nd);
++#else
++extern int mini_fo_create(inode_t *dir, dentry_t *dentry, int mode);
++
++extern int create_sto_nod(dentry_t *dentry, int mode, int dev);
++extern int create_sto_reg_file(dentry_t *dentry, int mode);
++#endif
++
++extern int create_sto_dir(dentry_t *dentry, int mode);
++
++extern int exists_in_storage(dentry_t *dentry);
++extern int is_mini_fo_existant(dentry_t *dentry);
++extern int get_neg_sto_dentry(dentry_t *dentry);
++extern int build_sto_structure(dentry_t *dir, dentry_t *dentry);
++extern int get_mini_fo_bpath(dentry_t *dentry, char **bpath, int *bpath_len);
++extern dentry_t *bpath_walk(super_block_t *sb, char *bpath);
++extern int bpath_put(dentry_t *dentry);
++
++/* check_mini_fo types functions */
++extern int check_mini_fo_dentry(dentry_t *dentry);
++extern int check_mini_fo_file(file_t *file);
++extern int check_mini_fo_inode(inode_t *inode);
++
++/* General meta functions, can be called from outside of meta.c */
++extern int meta_build_lists(dentry_t *dentry);
++extern int meta_put_lists(dentry_t *dentry);
++extern int __meta_put_lists(inode_t *inode);
++
++extern int meta_add_d_entry(dentry_t *dentry, const char *name, int len);
++extern int meta_add_r_entry(dentry_t *dentry,
++			    const char *old_name, int old_len,
++			    const char *new_name, int new_len);
++
++extern int meta_remove_r_entry(dentry_t *dentry, const char *name, int len);
++
++extern int meta_check_d_entry(dentry_t *dentry, const char *name, int len);
++extern int __meta_check_d_entry(inode_t *inode, const char *name, int len);
++
++extern char* meta_check_r_entry(dentry_t *dentry, const char *name, int len);
++extern char* __meta_check_r_entry(inode_t *inode, const char *name, int len);
++extern int meta_is_r_entry(dentry_t *dentry, const char *name, int len);
++extern int __meta_is_r_entry(inode_t *inode, const char *name, int len);
++
++/* Specific meta functions, should be called only inside meta.c */
++extern int __meta_put_d_list(inode_t *inode);
++extern int __meta_put_r_list(inode_t *inode);
++
++extern int meta_list_add_d_entry(dentry_t *dentry,
++				 const char *name, int len);
++extern int meta_list_add_r_entry(dentry_t *dentry,
++				 const char *old_name, int old_len,
++				 const char *new_name, int new_len);
++
++extern int meta_list_remove_r_entry(dentry_t *dentry,
++				    const char *name, int len);
++
++extern int __meta_list_remove_r_entry(inode_t *inode,
++				      const char *name, int len);
++
++extern int meta_write_d_entry(dentry_t *dentry, const char *name, int len);
++extern int meta_write_r_entry(dentry_t *dentry,
++			      const char *old_name, int old_len,
++			      const char *new_name, int new_len);
++
++extern int meta_sync_lists(dentry_t *dentry);
++extern int meta_sync_d_list(dentry_t *dentry, int app_flag);
++extern int meta_sync_r_list(dentry_t *dentry, int app_flag);
++
++/* ndl stuff */
++extern int ndl_add_entry(struct readdir_data *rd, const char *name, int len);
++extern void ndl_put_list(struct readdir_data *rd);
++extern int ndl_check_entry(struct readdir_data *rd,
++			   const char *name, int len);
++
++
++# define copy_inode_size(dst, src) \
++    dst->i_size = src->i_size; \
++    dst->i_blocks = src->i_blocks;
++
++static inline void
++fist_copy_attr_atime(inode_t *dest, const inode_t *src)
++{
++	ASSERT(dest != NULL);
++	ASSERT(src != NULL);
++	dest->i_atime = src->i_atime;
++}
++static inline void
++fist_copy_attr_times(inode_t *dest, const inode_t *src)
++{
++	ASSERT(dest != NULL);
++	ASSERT(src != NULL);
++	dest->i_atime = src->i_atime;
++	dest->i_mtime = src->i_mtime;
++	dest->i_ctime = src->i_ctime;
++}
++static inline void
++fist_copy_attr_timesizes(inode_t *dest, const inode_t *src)
++{
++	ASSERT(dest != NULL);
++	ASSERT(src != NULL);
++	dest->i_atime = src->i_atime;
++	dest->i_mtime = src->i_mtime;
++	dest->i_ctime = src->i_ctime;
++	copy_inode_size(dest, src);
++}
++static inline void
++fist_copy_attr_all(inode_t *dest, const inode_t *src)
++{
++	ASSERT(dest != NULL);
++	ASSERT(src != NULL);
++	dest->i_mode = src->i_mode;
++	dest->i_nlink = src->i_nlink;
++	dest->i_uid = src->i_uid;
++	dest->i_gid = src->i_gid;
++	dest->i_rdev = src->i_rdev;
++	dest->i_atime = src->i_atime;
++	dest->i_mtime = src->i_mtime;
++	dest->i_ctime = src->i_ctime;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)
++	dest->i_blksize = src->i_blksize;
++#endif
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,12)
++	dest->i_blkbits = src->i_blkbits;
++# endif /* linux 2.4.12 and newer */
++	copy_inode_size(dest, src);
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	dest->i_attr_flags = src->i_attr_flags;
++#else
++	dest->i_flags = src->i_flags;
++#endif
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++/* copied from linux/fs.h */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++static inline void double_lock(struct dentry *d1, struct dentry *d2)
++{
++	struct mutex *m1 = &d1->d_inode->i_mutex;
++	struct mutex *m2 = &d2->d_inode->i_mutex;
++	if (m1 != m2) {
++		if ((unsigned long) m1 < (unsigned long) m2) {
++			struct mutex *tmp = m2;
++			m2 = m1; m1 = tmp;
++		}
++		mutex_lock(m1);
++	}
++	mutex_lock(m2);
++}
++
++static inline void double_unlock(struct dentry *d1, struct dentry *d2)
++{
++	struct mutex *m1 = &d1->d_inode->i_mutex;
++	struct mutex *m2 = &d2->d_inode->i_mutex;
++	mutex_unlock(m1);
++	if (m1 != m2)
++		mutex_unlock(m2);
++	dput(d1);
++	dput(d2);
++}
++
++#else
++static inline void double_down(struct semaphore *s1, struct semaphore *s2)
++{
++        if (s1 != s2) {
++                if ((unsigned long) s1 < (unsigned long) s2) {
++                        struct semaphore *tmp = s2;
++                        s2 = s1; s1 = tmp;
++                }
++                down(s1);
++        }
++        down(s2);
++}
++
++static inline void double_up(struct semaphore *s1, struct semaphore *s2)
++{
++        up(s1);
++        if (s1 != s2)
++                up(s2);
++}
++
++static inline void double_lock(struct dentry *d1, struct dentry *d2)
++{
++        double_down(&d1->d_inode->i_sem, &d2->d_inode->i_sem);
++}
++
++static inline void double_unlock(struct dentry *d1, struct dentry *d2)
++{
++        double_up(&d1->d_inode->i_sem,&d2->d_inode->i_sem);
++        dput(d1);
++        dput(d2);
++}
++#endif   /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) */
++#endif  /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) */
++#endif /* __KERNEL__ */
++
++/*
++ * Definitions for user and kernel code
++ */
++
++/* ioctls */
++
++#endif	/* not __MINI_FO_H_ */
+--- /dev/null
++++ b/fs/mini_fo/mini_fo-merge
+@@ -0,0 +1,180 @@
++#!/bin/bash
++#
++# Copyright (C) 2005 Markus Klotzbuecher <mk@creamnet.de>
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License
++# as published by the Free Software Foundation; either version
++# 2 of the License, or (at your option) any later version.
++#
++
++BASE=
++STO=
++HELP=
++DRYRUN=
++VERBOSE=
++TMP="/tmp/"
++META_NAME="META_dAfFgHE39ktF3HD2sr"
++SKIP_DEL_LIST="skip-delete-list.mini_fo-merge"
++
++COMMAND=
++exec_command()
++{
++    if [ x$DRYRUN == "xset" ]; then
++	echo "  would run: $COMMAND"
++    elif ! [ x$DRYRUN == "xset" ]; then
++	if [ x$VERBOSE == "xset" ]; then
++	    echo "  running: $COMMAND"
++	fi
++	eval $COMMAND
++    fi
++}
++
++usage()
++{
++cat <<EOF
++
++USAGE: $0 -b <base dir> -s <storage dir>
++Version 0.1
++
++This script merges the contents of a mini_fo storage file system back
++to the base file system.
++
++!!! Warning: This will modify the base filesystem and can destroy data
++             if used wrongly.
++
++Options:
++     -b <base dir>
++          the directory of the base file system.
++
++     -s <storage dir>
++          the directory of the storage file system.
++
++     -d   dry run, will not change anything and print the commands that
++          would be executed.
++
++     -t   tmp dir for storing temporary file. default: $TMP
++
++     -v   show what operations are performed.
++
++     -h   displays this message.
++
++EOF
++}
++
++# parse parameters
++while getopts hdvt:b:s: OPTS
++  do
++  case $OPTS in
++      h)  HELP="set";;
++      d)  DRYRUN="set";;
++      v)  VERBOSE="set";;
++      b)  BASE="$OPTARG";;
++      s)  STO="$OPTARG";;
++      t)  TMP="$OPTARG";;
++      ?)  usage
++	  exit 1;;
++  esac
++done
++
++if [ "x$HELP" == "xset" ]; then
++    usage
++    exit -1
++fi
++
++if ! [ -d "$BASE" ] || ! [ -d "$STO" ]; then
++    echo -e "$0:\n Error, -s and/or -b argument missing. type $0 -h for help."
++    exit -1;
++fi
++
++# get full paths
++pushd $STO; STO=`pwd`; popd
++pushd $BASE; BASE=`pwd`; popd
++TMP=${TMP%/}
++
++
++cat<<EOF
++###############################################################################
++# mini_fo-merge
++#
++# base dir:       $BASE
++# storage dir:    $STO
++# meta filename:  $META_NAME
++# dry run:        $DRYRUN
++# verbose:        $VERBOSE
++# tmp files:      $TMP
++###############################################################################
++
++EOF
++
++rm $TMP/$SKIP_DEL_LIST
++
++# first process all renamed dirs
++echo "Merging renamed directories..."
++pushd $STO &> /dev/null
++find . -name $META_NAME -type f -print0  | xargs -0 -e grep  -e '^R ' | tr -s ':R' ' ' | while read ENTRY; do
++    echo "entry: $ENTRY"
++    META_FILE=`echo $ENTRY | cut -d ' ' -f 1`
++    OLD_B_DIR=`echo $ENTRY | cut -d ' ' -f 2 | sed -e 's/\///'`
++    NEW_NAME=`echo $ENTRY | cut -d ' ' -f 3`
++    NEW_B_DIR=`echo $META_FILE | sed -e "s/$META_NAME/$NEW_NAME/" | sed -e 's/^\.\///'`
++    echo "META_FILE: $META_FILE"
++    echo "OLD_B_DIR: $OLD_B_DIR"
++    echo "NEW_NAME: $NEW_NAME"
++    echo  "NEW_B_DIR: $NEW_B_DIR"
++
++    pushd $BASE &> /dev/null
++    # remove an existing dir in storage
++    COMMAND="rm -rf $NEW_B_DIR"; exec_command
++    COMMAND="cp -R $OLD_B_DIR $NEW_B_DIR"; exec_command
++    echo ""
++    popd &> /dev/null
++
++    # remember this dir to exclude it from deleting later
++    echo $NEW_B_DIR >> $TMP/$SKIP_DEL_LIST
++done
++
++# delete all whiteouted files from base
++echo -e "\nDeleting whiteout'ed files from base file system..."
++find . -name $META_NAME -type f -print0  | xargs -0 -e grep  -e '^D ' | sed -e 's/:D//' | while read ENTRY; do
++    META_FILE=`echo $ENTRY | cut -d ' ' -f 1`
++    DEL_NAME=`echo $ENTRY | cut -d ' ' -f 2`
++    DEL_FILE=`echo $META_FILE | sed -e "s/$META_NAME/$DEL_NAME/" | sed -e 's/^\.\///'`
++    grep -x $DEL_FILE $TMP/$SKIP_DEL_LIST &> /dev/null
++    if [ $? -ne 0 ]; then
++	pushd $BASE &> /dev/null
++	COMMAND="rm -rf $DEL_FILE"; exec_command
++	popd &> /dev/null
++    else
++	echo "  excluding: $DEL_FILE as in skip-del-list."
++    fi
++done
++
++# create all dirs and update permissions
++echo -e "\nSetting up directory structures in base file system..."
++find . -type d | sed -e 's/^\.\///' | while read DIR; do
++    PERMS=`stat -c %a $DIR`
++    DIR_UID=`stat -c %u $DIR`
++    DIR_GID=`stat -c %g $DIR`
++    pushd $BASE &> /dev/null
++    if ! [ -d $DIR ]; then
++	COMMAND="mkdir -p $DIR"; exec_command
++    fi
++    COMMAND="chmod $PERMS $DIR"; exec_command
++    COMMAND="chown $DIR_UID:$DIR_GID $DIR"; exec_command
++    popd &> /dev/null
++done
++
++# merge all non-directory files
++echo -e "\nMerging all non-directory files...."
++for i in b c p f l s; do
++    find . -type $i | sed -e 's/^\.\///' | grep -v "$META_NAME" | while read FILE; do
++	pushd $BASE #&> /dev/null
++	COMMAND="cp -df $STO/$FILE $BASE/$FILE"; exec_command
++	popd &> /dev/null
++    done
++done
++popd &> /dev/null
++
++#rm $TMP/$SKIP_DEL_LIST
++
++echo "Done!"
+--- /dev/null
++++ b/fs/mini_fo/mini_fo-overlay
+@@ -0,0 +1,130 @@
++#!/bin/bash
++#
++# Copyright (C) 2005 Markus Klotzbuecher <mk@creamnet.de>
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License
++# as published by the Free Software Foundation; either version
++# 2 of the License, or (at your option) any later version.
++#
++
++HELP=
++SUFF=
++MNTP=
++MNT_DIR="/mnt"
++STO=
++STO_DIR="/tmp"
++BASE=
++
++usage()
++{
++cat <<EOF
++
++Usage: $0 [-s suffix] [-d sto_dir_dir] [-m mount point] base_dir
++Version 0.1
++
++This script overlays the given base directory using the mini_fo file
++system. If only the base directory base_dir is given, $0
++will use a storage directory called "sto-<base_dir_name>" in $STO_DIR,
++and mount point "mini_fo-<base_dir_dir>" in $MNT_DIR.
++
++Options:
++     -s <suffix>
++          add given suffix to storage directory and the mount
++          point. This is usefull for overlaying one base directory
++          several times and avoiding conflicts with storage directory
++          names and mount points.
++
++     -d <sto_dir_dir>
++          change the directory in which the storage directory will be
++          created (default is currently "$STO_DIR".
++
++     -m <mount point>
++          use an alternative directory to create the mini_fo
++          mountpoint (default is currently "$MNT_DIR".
++
++     -h   displays this message.
++
++EOF
++exit 1;
++}
++
++while getopts hm:s:d: OPTS
++  do
++  case $OPTS in
++      s)  SUFF="$OPTARG";;
++      d)  STO_DIR="$OPTARG";;
++      m)  MNT_DIR="$OPTARG";;
++      h)  HELP="set";;
++      ?)  usage
++	  exit 1;;
++  esac
++done
++shift $(($OPTIND - 1))
++
++BASE="$1"
++
++if [ "x$HELP" == "xset" ]; then
++    usage
++    exit -1
++fi
++
++# fix suffix
++if [ "x$SUFF" != "x" ]; then
++    SUFF="-$SUFF"
++fi
++
++# kill trailing slashes
++MNT_DIR=${MNT_DIR%/}
++STO_DIR=${STO_DIR%/}
++BASE=${BASE%/}
++
++
++if ! [ -d "$BASE" ]; then
++    echo "invalid base dir $BASE, run $0 -h for help."
++    exit -1
++fi
++
++# check opts
++if ! [ -d "$MNT_DIR" ]; then
++    echo "invalid mount dir $MNT_DIR, run $0 -h for help."
++    exit -1
++fi
++
++if ! [ -d "$STO_DIR" ]; then
++    echo "invalid sto_dir_dir $STO_DIR, run $0 -h for help."
++    exit -1
++fi
++
++MNTP="$MNT_DIR/mini_fo-`basename $BASE`$SUFF"
++STO="$STO_DIR/sto-`basename $BASE`$SUFF"
++
++# create the mount point if it doesn't exist
++mkdir -p $MNTP
++if [ $? -ne 0 ]; then
++    echo "Error, failed to create mount point $MNTP"
++fi
++
++mkdir -p $STO
++if [ $? -ne 0 ]; then
++    echo "Error, failed to create storage dir $STO"
++fi
++
++# check if fs is already mounted
++mount | grep mini_fo | grep $MNTP &> /dev/null
++if [ $? -eq 0 ]; then
++    echo "Error, existing mini_fo mount at $MNTP."
++    exit -1
++fi
++
++mount | grep mini_fo | grep $STO &> /dev/null
++if [ $? -eq 0 ]; then
++    echo "Error, $STO seems to be used already."
++    exit -1
++fi
++
++# mount
++mount -t mini_fo -o base=$BASE,sto=$STO $BASE $MNTP
++
++if [ $? -ne 0 ]; then
++    echo "Error, mounting failed, maybe no permisson to mount?"
++fi
+--- /dev/null
++++ b/fs/mini_fo/mmap.c
+@@ -0,0 +1,637 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif /* HAVE_CONFIG_H */
++
++#include "fist.h"
++#include "mini_fo.h"
++
++
++#ifdef FIST_COUNT_WRITES
++/* for counting writes in the middle vs. regular writes */
++unsigned long count_writes = 0, count_writes_middle = 0;
++#endif /* FIST_COUNT_WRITES */
++
++/* forward declaration of commit write and prepare write */
++STATIC int mini_fo_commit_write(file_t *file, page_t *page, unsigned from, unsigned to);
++STATIC int mini_fo_prepare_write(file_t *file, page_t *page, unsigned from, unsigned to);
++
++
++/*
++ * Function for handling creation of holes when lseek-ing past the
++ * end of the file and then writing some data.
++ */
++int
++mini_fo_fill_zeros(file_t* file, page_t *page, unsigned from)
++{
++	int err = 0;
++	dentry_t *dentry = file->f_dentry;
++	inode_t *inode = dentry->d_inode;
++	page_t *tmp_page;
++	int index;
++
++	print_entry_location();
++
++	for (index = inode->i_size >> PAGE_CACHE_SHIFT; index < page->index; index++) {
++		tmp_page = mini_fo_get1page(file, index);
++		if (IS_ERR(tmp_page)) {
++			err = PTR_ERR(tmp_page);
++			goto out;
++		}
++
++		/*
++		 * zero out rest of the contents of the page between the appropriate
++		 * offsets.
++		 */
++		memset((char*)page_address(tmp_page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, PAGE_CACHE_SIZE - (inode->i_size & ~PAGE_CACHE_MASK));
++
++		if (! (err = mini_fo_prepare_write(file, tmp_page, 0, PAGE_CACHE_SIZE)))
++			err = mini_fo_commit_write(file, tmp_page, 0, PAGE_CACHE_SIZE);
++
++		page_cache_release(tmp_page);
++		if (err < 0)
++			goto out;
++		if (current->need_resched)
++			schedule();
++	}
++
++	/* zero out appropriate parts of last page */
++
++	/*
++	 * if the encoding type is block, then adjust the 'from' (where the
++	 * zeroing will start) offset appropriately
++	 */
++	from = from & (~(FIST_ENCODING_BLOCKSIZE - 1));
++
++	if ((from - (inode->i_size & ~PAGE_CACHE_MASK)) > 0) {
++
++		memset((char*)page_address(page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, from - (inode->i_size & ~PAGE_CACHE_MASK));
++		if (! (err = mini_fo_prepare_write(file, page, 0, PAGE_CACHE_SIZE)))
++			err = mini_fo_commit_write(file, page, 0, PAGE_CACHE_SIZE);
++
++		if (err < 0)
++			goto out;
++		if (current->need_resched)
++			schedule();
++	}
++
++ out:
++	print_exit_status(err);
++	return err;
++}
++
++
++
++STATIC int
++mini_fo_writepage(page_t *page)
++{
++	int err = -EIO;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	page_t *hidden_page;
++	char *kaddr, *hidden_kaddr;
++
++	print_entry_location();
++
++	inode = page->mapping->host;
++	hidden_inode = itohi(inode);
++
++	/*
++	 * writepage is called when shared mmap'ed files need to write
++	 * their pages, while prepare/commit_write are called from the
++	 * non-paged write() interface.  (However, in 2.3 the two interfaces
++	 * share the same cache, while in 2.2 they didn't.)
++	 *
++	 * So we pretty much have to duplicate much of what commit_write does.
++	 */
++
++	/* find lower page (returns a locked page) */
++	hidden_page = grab_cache_page(hidden_inode->i_mapping, page->index);
++	if (!hidden_page)
++		goto out;
++
++	/* get page address, and encode it */
++	kaddr = (char *) kmap(page);
++	hidden_kaddr = (char*) kmap(hidden_page);
++	mini_fo_encode_block(kaddr, hidden_kaddr, PAGE_CACHE_SIZE, inode, inode->i_sb, page->index);
++	/* if encode_block could fail, then return error */
++	kunmap(page);
++	kunmap(hidden_page);
++
++	/* call lower writepage (expects locked page) */
++	err = hidden_inode->i_mapping->a_ops->writepage(hidden_page);
++
++	/*
++	 * update mtime and ctime of lower level file system
++	 * mini_fo' mtime and ctime are updated by generic_file_write
++	 */
++	hidden_inode->i_mtime = hidden_inode->i_ctime = CURRENT_TIME;
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,1)
++	UnlockPage(hidden_page);	/* b/c grab_cache_page locked it */
++# endif /* kernel older than 2.4.1 */
++	page_cache_release(hidden_page); /* b/c grab_cache_page increased refcnt */
++
++	if (err)
++		ClearPageUptodate(page);
++	else
++		SetPageUptodate(page);
++ out:
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,1)
++	UnlockPage(page);
++# endif /* kernel 2.4.1 and newer */
++	print_exit_status(err);
++	return err;
++}
++
++
++/*
++ * get one page from cache or lower f/s, return error otherwise.
++ * returns unlocked, up-to-date page (if ok), with increased refcnt.
++ */
++page_t *
++mini_fo_get1page(file_t *file, int index)
++{
++	page_t *page;
++	dentry_t *dentry;
++	inode_t *inode;
++	struct address_space *mapping;
++	int err;
++
++	print_entry_location();
++
++	dentry = file->f_dentry; /* CPW: Moved below print_entry_location */
++	inode = dentry->d_inode;
++	mapping = inode->i_mapping;
++
++	fist_dprint(8, "%s: read page index %d pid %d\n", __FUNCTION__, index, current->pid);
++	if (index < 0) {
++		printk("%s BUG: index=%d\n", __FUNCTION__, index);
++		page = ERR_PTR(-EIO);
++		goto out;
++	}
++	page = read_cache_page(mapping,
++			       index,
++			       (filler_t *) mapping->a_ops->readpage,
++			       (void *) file);
++	if (IS_ERR(page))
++		goto out;
++	wait_on_page(page);
++	if (!Page_Uptodate(page)) {
++		lock_page(page);
++		err = mapping->a_ops->readpage(file, page);
++		if (err) {
++			page = ERR_PTR(err);
++			goto out;
++		}
++		wait_on_page(page);
++		if (!Page_Uptodate(page)) {
++			page = ERR_PTR(-EIO);
++			goto out;
++		}
++	}
++
++ out:
++	print_exit_pointer(page);
++	return page;
++}
++
++
++/*
++ * get one page from cache or lower f/s, return error otherwise.
++ * similar to get1page, but doesn't guarantee that it will return
++ * an unlocked page.
++ */
++page_t *
++mini_fo_get1page_cached(file_t *file, int index)
++{
++	page_t *page;
++	dentry_t *dentry;
++	inode_t *inode;
++	struct address_space *mapping;
++	int err;
++
++	print_entry_location();
++
++	dentry = file->f_dentry; /* CPW: Moved below print_entry_location */
++	inode = dentry->d_inode;
++	mapping = inode->i_mapping;
++
++	fist_dprint(8, "%s: read page index %d pid %d\n", __FUNCTION__, index, current->pid);
++	if (index < 0) {
++		printk("%s BUG: index=%d\n", __FUNCTION__, index);
++		page = ERR_PTR(-EIO);
++		goto out;
++	}
++	page = read_cache_page(mapping,
++			       index,
++			       (filler_t *) mapping->a_ops->readpage,
++			       (void *) file);
++	if (IS_ERR(page))
++		goto out;
++
++ out:
++	print_exit_pointer(page);
++	return page;
++}
++
++
++/*
++ * readpage is called from generic_page_read and the fault handler.
++ * If your file system uses generic_page_read for the read op, it
++ * must implement readpage.
++ *
++ * Readpage expects a locked page, and must unlock it.
++ */
++STATIC int
++mini_fo_do_readpage(file_t *file, page_t *page)
++{
++	int err = -EIO;
++	dentry_t *dentry;
++	file_t *hidden_file = NULL;
++	dentry_t *hidden_dentry;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	char *page_data;
++	page_t *hidden_page;
++	char *hidden_page_data;
++	int real_size;
++
++	print_entry_location();
++
++	dentry = file->f_dentry; /* CPW: Moved below print_entry_location */
++	if (ftopd(file) != NULL)
++		hidden_file = ftohf(file);
++	hidden_dentry = dtohd(dentry);
++	inode = dentry->d_inode;
++	hidden_inode = itohi(inode);
++
++	fist_dprint(7, "%s: requesting page %d from file %s\n", __FUNCTION__, page->index, dentry->d_name.name);
++
++	MALLOC_PAGE_POINTERS(hidden_pages, num_hidden_pages);
++	MALLOC_PAGEDATA_POINTERS(hidden_pages_data, num_hidden_pages);
++	FOR_EACH_PAGE
++		CURRENT_HIDDEN_PAGE = NULL;
++
++	/* find lower page (returns a locked page) */
++	FOR_EACH_PAGE {
++		fist_dprint(8, "%s: Current page index = %d\n", __FUNCTION__, CURRENT_HIDDEN_PAGEINDEX);
++		CURRENT_HIDDEN_PAGE = read_cache_page(hidden_inode->i_mapping,
++						      CURRENT_HIDDEN_PAGEINDEX,
++						      (filler_t *) hidden_inode->i_mapping->a_ops->readpage,
++						      (void *) hidden_file);
++		if (IS_ERR(CURRENT_HIDDEN_PAGE)) {
++			err = PTR_ERR(CURRENT_HIDDEN_PAGE);
++			CURRENT_HIDDEN_PAGE = NULL;
++			goto out_release;
++		}
++	}
++
++	/*
++	 * wait for the page data to show up
++	 * (signaled by readpage as unlocking the page)
++	 */
++	FOR_EACH_PAGE {
++		wait_on_page(CURRENT_HIDDEN_PAGE);
++		if (!Page_Uptodate(CURRENT_HIDDEN_PAGE)) {
++			/*
++			 * call readpage() again if we returned from wait_on_page with a
++			 * page that's not up-to-date; that can happen when a partial
++			 * page has a few buffers which are ok, but not the whole
++			 * page.
++			 */
++			lock_page(CURRENT_HIDDEN_PAGE);
++			err = hidden_inode->i_mapping->a_ops->readpage(hidden_file,
++								       CURRENT_HIDDEN_PAGE);
++			if (err) {
++				CURRENT_HIDDEN_PAGE = NULL;
++				goto out_release;
++			}
++			wait_on_page(CURRENT_HIDDEN_PAGE);
++			if (!Page_Uptodate(CURRENT_HIDDEN_PAGE)) {
++				err = -EIO;
++				goto out_release;
++			}
++		}
++	}
++
++	/* map pages, get their addresses */
++	page_data = (char *) kmap(page);
++	FOR_EACH_PAGE
++		CURRENT_HIDDEN_PAGEDATA = (char *) kmap(CURRENT_HIDDEN_PAGE);
++
++	/* if decode_block could fail, then return error */
++	err = 0;
++	real_size = hidden_inode->i_size - (page->index << PAGE_CACHE_SHIFT);
++	if (real_size <= 0)
++		memset(page_data, 0, PAGE_CACHE_SIZE);
++	else if (real_size < PAGE_CACHE_SIZE) {
++		mini_fo_decode_block(hidden_page_data, page_data, real_size, inode, inode->i_sb, page->index);
++		memset(page_data + real_size, 0, PAGE_CACHE_SIZE - real_size);
++	} else
++		mini_fo_decode_block(hidden_page_data, page_data, PAGE_CACHE_SIZE, inode, inode->i_sb, page->index);
++
++	FOR_EACH_PAGE
++		kunmap(CURRENT_HIDDEN_PAGE);
++	kunmap(page);
++
++ out_release:
++	FOR_EACH_PAGE
++		if (CURRENT_HIDDEN_PAGE)
++			page_cache_release(CURRENT_HIDDEN_PAGE); /* undo read_cache_page */
++
++	FREE_PAGE_POINTERS(hidden_pages, num_hidden_pages);
++	FREE_PAGEDATA_POINTERS(hidden_pages_data, num_hidden_pages);
++
++ out:
++	if (err == 0)
++		SetPageUptodate(page);
++	else
++		ClearPageUptodate(page);
++
++	print_exit_status(err);
++	return err;
++}
++
++
++STATIC int
++mini_fo_readpage(file_t *file, page_t *page)
++{
++	int err;
++	print_entry_location();
++
++	err = mini_fo_do_readpage(file, page);
++
++	/*
++	 * we have to unlock our page, b/c we _might_ have gotten a locked page.
++	 * but we no longer have to wakeup on our page here, b/c UnlockPage does
++	 * it
++	 */
++	UnlockPage(page);
++
++	print_exit_status(err);
++	return err;
++}
++
++
++STATIC int
++mini_fo_prepare_write(file_t *file, page_t *page, unsigned from, unsigned to)
++{
++	int err = 0;
++
++	print_entry_location();
++
++	/*
++	 * we call kmap(page) only here, and do the kunmap
++	 * and the actual downcalls, including unlockpage and uncache
++	 * in commit_write.
++	 */
++	kmap(page);
++
++	/* fast path for whole page writes */
++	if (from == 0 && to == PAGE_CACHE_SIZE)
++		goto out;
++	/* read the page to "revalidate" our data */
++	/* call the helper function which doesn't unlock the page */
++	if (!Page_Uptodate(page))
++		err = mini_fo_do_readpage(file, page);
++
++ out:
++	print_exit_status(err);
++	return err;
++}
++
++
++
++STATIC int
++mini_fo_commit_write(file_t *file, page_t *page, unsigned from, unsigned to)
++{
++	int err = -ENOMEM;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	page_t *hidden_page;
++	file_t *hidden_file = NULL;
++	loff_t pos;
++	unsigned bytes = to - from;
++	unsigned hidden_from, hidden_to, hidden_bytes;
++
++	print_entry_location();
++
++	inode = page->mapping->host; /* CPW: Moved below print_entry_location */
++	hidden_inode = itohi(inode);
++
++	ASSERT(file != NULL);
++	/*
++	 * here we have a kmapped page, with data from the user copied
++	 * into it.  we need to encode_block it, and then call the lower
++	 * commit_write.  We also need to simulate same behavior of
++	 * generic_file_write, and call prepare_write on the lower f/s first.
++	 */
++#ifdef FIST_COUNT_WRITES
++	count_writes++;
++# endif /* FIST_COUNT_WRITES */
++
++	/* this is append and/or extend -- we can't have holes so fill them in */
++	if (page->index > (hidden_inode->i_size >> PAGE_CACHE_SHIFT)) {
++		page_t *tmp_page;
++		int index;
++		for (index = hidden_inode->i_size >> PAGE_CACHE_SHIFT; index < page->index; index++) {
++			tmp_page = mini_fo_get1page(file, index);
++			if (IS_ERR(tmp_page)) {
++				err = PTR_ERR(tmp_page);
++				goto out;
++			}
++			/* zero out the contents of the page at the appropriate offsets */
++			memset((char*)page_address(tmp_page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, PAGE_CACHE_SIZE - (inode->i_size & ~PAGE_CACHE_MASK));
++			if (!(err = mini_fo_prepare_write(file, tmp_page, 0, PAGE_CACHE_SIZE)))
++				err = mini_fo_commit_write(file, tmp_page, 0, PAGE_CACHE_SIZE);
++			page_cache_release(tmp_page);
++			if (err < 0)
++				goto out;
++			if (current->need_resched)
++				schedule();
++		}
++	}
++
++	if (ftopd(file) != NULL)
++		hidden_file = ftohf(file);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_inode->i_mutex);
++#else
++	down(&hidden_inode->i_sem);
++#endif
++	/* find lower page (returns a locked page) */
++	hidden_page = grab_cache_page(hidden_inode->i_mapping, page->index);
++	if (!hidden_page)
++		goto out;
++
++#if FIST_ENCODING_BLOCKSIZE > 1
++#  error encoding_blocksize greater than 1 is not yet supported
++# endif /* FIST_ENCODING_BLOCKSIZE > 1 */
++
++	hidden_from = from & (~(FIST_ENCODING_BLOCKSIZE - 1));
++	hidden_to = ((to + FIST_ENCODING_BLOCKSIZE - 1) & (~(FIST_ENCODING_BLOCKSIZE - 1)));
++	if ((page->index << PAGE_CACHE_SHIFT) + to > hidden_inode->i_size) {
++
++		/*
++		 * if this call to commit_write had introduced holes and the code
++		 * for handling holes was invoked, then the beginning of this page
++		 * must be zeroed out
++		 * zero out bytes from 'size_of_file%pagesize' to 'from'.
++		 */
++		if ((hidden_from - (inode->i_size & ~PAGE_CACHE_MASK)) > 0)
++			memset((char*)page_address(page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, hidden_from - (inode->i_size & ~PAGE_CACHE_MASK));
++
++	}
++	hidden_bytes = hidden_to - hidden_from;
++
++	/* call lower prepare_write */
++	err = -EINVAL;
++	if (hidden_inode->i_mapping &&
++	    hidden_inode->i_mapping->a_ops &&
++	    hidden_inode->i_mapping->a_ops->prepare_write)
++		err = hidden_inode->i_mapping->a_ops->prepare_write(hidden_file,
++								    hidden_page,
++								    hidden_from,
++								    hidden_to);
++	if (err)
++		/* don't leave locked pages behind, esp. on an ENOSPC */
++		goto out_unlock;
++
++	fist_dprint(8, "%s: encoding %d bytes\n", __FUNCTION__, hidden_bytes);
++	mini_fo_encode_block((char *) page_address(page) + hidden_from, (char*) page_address(hidden_page) + hidden_from, hidden_bytes, inode, inode->i_sb, page->index);
++	/* if encode_block could fail, then goto unlock and return error */
++
++	/* call lower commit_write */
++	err = hidden_inode->i_mapping->a_ops->commit_write(hidden_file,
++							   hidden_page,
++							   hidden_from,
++							   hidden_to);
++
++	if (err < 0)
++		goto out_unlock;
++
++	err = bytes;	/* convert error to no. of bytes */
++
++	inode->i_blocks = hidden_inode->i_blocks;
++	/* we may have to update i_size */
++	pos = (page->index << PAGE_CACHE_SHIFT) + to;
++	if (pos > inode->i_size)
++		inode->i_size = pos;
++
++	/*
++	 * update mtime and ctime of lower level file system
++	 * mini_fo' mtime and ctime are updated by generic_file_write
++	 */
++	hidden_inode->i_mtime = hidden_inode->i_ctime = CURRENT_TIME;
++
++	mark_inode_dirty_sync(inode);
++
++ out_unlock:
++	UnlockPage(hidden_page);
++	page_cache_release(hidden_page);
++	kunmap(page);		/* kmap was done in prepare_write */
++ out:
++	/* we must set our page as up-to-date */
++	if (err < 0)
++		ClearPageUptodate(page);
++	else
++		SetPageUptodate(page);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_inode->i_mutex);
++#else
++	up(&hidden_inode->i_sem);
++#endif
++	print_exit_status(err);
++	return err;			/* assume all is ok */
++}
++
++
++STATIC int
++mini_fo_bmap(struct address_space *mapping, long block)
++{
++	int err = 0;
++	inode_t *inode;
++	inode_t *hidden_inode;
++
++	print_entry_location();
++
++	inode = (inode_t *) mapping->host;
++	hidden_inode = itohi(inode);
++
++	if (hidden_inode->i_mapping->a_ops->bmap)
++		err = hidden_inode->i_mapping->a_ops->bmap(hidden_inode->i_mapping, block);
++	print_exit_location();
++	return err;
++}
++
++
++/*
++ * This function is copied verbatim from mm/filemap.c.
++ * XXX: It should be simply moved to some header file instead -- bug Al about it!
++ */
++static inline int sync_page(struct page *page)
++{
++	struct address_space *mapping = page->mapping;
++
++	if (mapping && mapping->a_ops && mapping->a_ops->sync_page)
++		return mapping->a_ops->sync_page(page);
++	return 0;
++}
++
++
++/*
++ * XXX: we may not need this function if not FIST_FILTER_DATA.
++ * FIXME: for FIST_FILTER_SCA, get all lower pages and sync them each.
++ */
++STATIC int
++mini_fo_sync_page(page_t *page)
++{
++	int err = 0;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	page_t *hidden_page;
++
++	print_entry_location();
++
++	inode = page->mapping->host; /* CPW: Moved below print_entry_location */
++	hidden_inode = itohi(inode);
++
++	/* find lower page (returns a locked page) */
++	hidden_page = grab_cache_page(hidden_inode->i_mapping, page->index);
++	if (!hidden_page)
++		goto out;
++
++	err = sync_page(hidden_page);
++
++	UnlockPage(hidden_page);	/* b/c grab_cache_page locked it */
++	page_cache_release(hidden_page); /* b/c grab_cache_page increased refcnt */
++
++ out:
++	print_exit_status(err);
++	return err;
++}
+--- /dev/null
++++ b/fs/mini_fo/README
+@@ -0,0 +1,163 @@
++README for the mini_fo overlay file system
++=========================================
++
++
++WHAT IS MINI_FO?
++----------------
++
++mini_fo is a virtual kernel file system that can make read-only
++file systems writable. This is done by redirecting modifying operations
++to a writeable location called "storage directory", and leaving the
++original data in the "base directory" untouched. When reading, the
++file system merges the modifed and original data so that only the
++newest versions will appear. This occurs transparently to the user,
++who can access the data like on any other read-write file system.
++
++Base and storage directories may be located on the same or on
++different partitions and may be of different file system types. While
++the storage directory obviously needs to be writable, the base may or
++may not be writable, what doesn't matter as it will no be modified
++anyway.
++
++
++WHAT IS GOOD FOR?
++-----------------
++
++The primary purpose of the mini_fo file system is to allow easy
++software updates to embedded systems, that often store their root
++file system in a read-only flash file system, but there are many
++more as for example sandboxing, or for allowing live-cds to
++permanently store information.
++
++
++BUILDING
++--------
++This should be simple. Adjust the Makefile to point to the correct
++kernel headers you want to build the module for. Then:
++
++    # make
++
++should build "mini_fo.o" for a 2.4 kernel or "mini_fo.ko" for a 2.6
++kernel.
++
++If you are building the module for you current kernel, you can install
++the module (as root):
++
++    # make install
++
++or uninstall with
++
++    # make uninstall
++
++
++USING THE FILE SYSTEM
++--------------------
++
++the general mount syntax is:
++
++   mount -t mini_fo -o base=<base directory>,sto=<storage directory>\
++                            <base directory> <mount point>
++
++Example:
++
++You have mounted a cdrom to /mnt/cdrom and want to modifiy some files
++on it:
++
++load the module (as root)
++
++    # insmod mini_fo.o for a 2.4 kernel or
++
++    # insmod mini_fo.ko for a 2.6 kernel
++
++
++create a storage dir in tmp and a mountpoint for mini_fo:
++
++    # mkdir /tmp/sto
++    # mkdir /mnt/mini_fo
++
++and mount the mini_fo file system:
++
++    # mount -t mini_fo -o base=/mnt/cdrom,sto=/tmp/sto /mnt/cdrom /mnt/mini_fo
++
++
++Now the data stored on the cd can be accessed via the mini_fo
++mountpoint just like any read-write file system, files can be modified
++and deleted, new ones can be created and so on. When done unmount the
++file system:
++
++    # unmount /mnt/mini_fo
++
++Note that if the file system is mounted again using the same storage
++file system, of course it will appear in the modified state again. If
++you remount it using an new empty storage directory, it will be
++unmodified. Therefore by executing:
++
++    # cd /tmp/sto
++    # rm -rf *
++
++you can nuke all the changes you made to the original file system. But
++ remember NEVER do this while the mini_fo file system is mounted!
++
++
++Alternatively you can use the mini_fo-overlay bash script, that
++simplifies managing mini_fo mounts. See TOOLS Section.
++
++
++TOOLS
++-----
++
++mini_fo-merge (experimental):
++
++This is a bash script that will merge changes contained in the storage
++directory back to the base directory. This allows mini_fo to function
++as a cache file system by overlaying a slow (network, ...) file system
++and using a fast (ramdisk, ...) as storage. When done, changes can be
++merged back to the (slow) base with mini_fo-merge. See "mini_fo-merge
++-h" for details.
++
++It can be usefull for merging changes back after a successfull test
++(patches, software updates...)
++
++
++mini_fo-overlay:
++
++This bash script simplifies managing one or more mini_fo mounts. For
++overlaying a directory called "basedir1", you can just call:
++
++    # mini_fo-overlay basedir1
++
++This will mount mini_fo with "basedir1" as base, "/tmp/sto-basedir1/"
++as storage to "/mnt/mini_fo-basedir1/". It has more options though,
++type "mini_fo-overlay -h" for details.
++
++
++DOCUMENTATION, REPORTING BUGS, GETTING HELP
++-------------------------------------------
++
++Please visit the mini_fo project page at:
++
++http://www.denx.de/twiki/bin/view/Know/MiniFOHome
++
++
++WARNINGS
++--------
++
++Never modify the base or the storage directorys while the mini_fo
++file system is mounted, or you might crash you system. Simply accessing
++and reading should not cause any trouble.
++
++Exporting a mini_fo mount point via NFS has not been tested, and may
++or may not work.
++
++Check the RELEASE_NOTES for details on bugs and features.
++
++
++
++Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++
++This program is free software; you can redistribute it and/or
++modify it under the terms of the GNU General Public License
++as published by the Free Software Foundation; either version
++2 of the License, or (at your option) any later version.
++
++
+--- /dev/null
++++ b/fs/mini_fo/RELEASE_NOTES
+@@ -0,0 +1,111 @@
++Release:	mini_fo-0.6.1 (v0-6-1)
++Date:		21.09.2005
++
++
++Changes:
++--------
++v0-6-1:
++
++- bugfixes (see ChangeLog)
++
++- two helper scripts "mini_fo_merge" and "mini_fo_overlay" (see
++  README for details).
++
++v0-6-0:
++
++- Support for 2.4 and 2.6 (see Makefile)
++
++- Partial hard link support (creating works as expected, but already
++  existing links in the base file system will be treated as if they
++  were individual files).
++
++- Various bugfixes and cleanups.
++
++
++v0-6-0-pre1:
++
++- This is mini_fo-0-6-0-pre1! This release is a complete rewrite of
++  many vital mini_fo parts such as the old whiteout list code which
++  has been replaced by the new META subsystem.
++
++- Light weight directory renaming implemented. This means if a
++  directory is renamed via the mini_fo filesystem this will no longer
++  result in a complete copy in storage, instead only one empty
++  directory will be created. All base filed contained in the original
++  directory stay there until modified.
++
++- Special files (creating, renaming, deleting etc.) now working.
++
++- Many bugfixes and cleanup, mini_fo is now a lot more stable.
++
++
++v0-5-10:
++
++- Final release of the 0-5-* versions. Next will be a complete rewrite
++  of many features. This release contains several bugfixes related to
++  directory renaming.
++
++
++v0-5-10-pre6:
++
++- Lots of cleanup and several bugfixes related to directory deleting
++
++- Directory renaming suddenly works, what is most likely due to the
++  fact tha that "mv" is smart: if the classic rename doesn't work it
++  will assume that source and target file are on different fs and will
++  copy the directory and try to remove the source directory. Until
++  directory removing wasn't implemented, it would fail to do this and
++  rollback.
++  So, directory renaming works for now, but it doesn't yet do what you
++  would expect from a overlay fs, so use with care.
++
++
++v0-5-10-pre5:
++
++- implemented directory deleting
++- made parsing of mount options more stable
++- New format of mount options! (See README)
++- I can't reproduce the unknown panic with 2.4.25 anymore, so I'll
++  happily assume it never existed!
++
++
++Implemented features:
++---------------------
++
++- creating hard links (see BUGS on already existing hard links)
++- lightweight directory renaming
++- renaming device files, pipes, sockets, etc.
++- creating, renaming, deleting of special files
++- deleting directorys
++- general directory reading (simple "ls" )
++- creating files in existing directorys
++- creating directorys
++- renaming files.
++- reading and writing files (involves opening)
++- appending to files (creates copy in storage)
++- deleting files
++- llseek works too, what allows editors to work
++- persistency (a deleted file stay deleted over remounts)
++- use of symbolic links
++- creating of device files
++
++
++Not (yet) implemented features:
++-------------------------------
++
++- full hard link support.
++
++
++
++BUGS:
++-----
++
++Hard links in the base file system will be treated as individual
++files, not as links to one inode.
++
++The main problem with hard links isn't allowing to create them, but
++their pure existence. If you modify a base hard link, the changes made
++will only show up on this link, the other link will remain in the
++original state. I hope to fix this someday. Please note that this does
++not effect the special hard links '.' and '..', that are handled
++seperately by the lower fs.
+--- /dev/null
++++ b/fs/mini_fo/state.c
+@@ -0,0 +1,620 @@
++/*
++ * Copyright (C) 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif /* HAVE_CONFIG_H */
++
++#include "fist.h"
++#include "mini_fo.h"
++
++
++/* create the storage file, setup new states */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++int create_sto_reg_file(dentry_t *dentry, int mode, struct nameidata *nd)
++#else
++int create_sto_reg_file(dentry_t *dentry, int mode)
++#endif
++{
++	int err = 0;
++	inode_t *dir;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++
++	if(exists_in_storage(dentry)) {
++		printk(KERN_CRIT "mini_fo: create_sto_file: wrong type or state.\n");
++		err = -EINVAL;
++		goto out;
++	}
++	err = get_neg_sto_dentry(dentry);
++
++	if (err) {
++		printk(KERN_CRIT "mini_fo: create_sto_file: ERROR getting neg. sto dentry.\n");
++		goto out;
++	}
++
++	dir = dentry->d_parent->d_inode;
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* lock parent */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++        down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = PTR_ERR(hidden_sto_dir_dentry);
++        if (IS_ERR(hidden_sto_dir_dentry))
++                goto out;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	err = vfs_create(hidden_sto_dir_dentry->d_inode,
++			 hidden_sto_dentry,
++			 mode, nd);
++#else
++	err = vfs_create(hidden_sto_dir_dentry->d_inode,
++			 hidden_sto_dentry,
++			 mode);
++#endif
++        if(err) {
++		printk(KERN_CRIT "mini_fo: create_sto_file: ERROR creating sto file.\n");
++                goto out_lock;
++	}
++
++	if(!dtohd2(dentry)->d_inode) {
++		printk(KERN_CRIT "mini_fo: create_sto_file: ERROR creating sto file [2].\n");
++                err = -EINVAL;
++                goto out_lock;
++        }
++
++        /* interpose the new inode */
++        if(dtost(dentry) == DELETED) {
++                dtost(dentry) = DEL_REWRITTEN;
++                err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0);
++                if(err)
++                        goto out_lock;
++        }
++        else if(dtost(dentry) == NON_EXISTANT) {
++                dtost(dentry) = CREATED;
++                err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0);
++                if(err)
++                        goto out_lock;
++        }
++        else if(dtost(dentry) == UNMODIFIED) {
++                dtost(dentry) = MODIFIED;
++                /* interpose on new inode */
++                if(itohi2(dentry->d_inode) != NULL) {
++                        printk(KERN_CRIT "mini_fo: create_sto_file: invalid inode detected.\n");
++                        err = -EINVAL;
++                        goto out_lock;
++                }
++                itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++	}
++	fist_copy_attr_timesizes(dentry->d_parent->d_inode,
++				 hidden_sto_dir_dentry->d_inode);
++
++ out_lock:
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++        dput(hidden_sto_dir_dentry);
++ out:
++	return err;
++}
++
++/* create the sto dir, setup states */
++int create_sto_dir(dentry_t *dentry, int mode)
++{
++	int err = 0;
++	inode_t *dir;
++	dentry_t *hidden_sto_dentry;
++        dentry_t *hidden_sto_dir_dentry;
++
++	/* had to take the "!S_ISDIR(mode))" check out, because it failed */
++	if(exists_in_storage(dentry)) {
++                printk(KERN_CRIT "mini_fo: create_sto_dir: wrong type or state.\\
++n");
++                err = -EINVAL;
++                goto out;
++        }
++
++	err = get_neg_sto_dentry(dentry);
++	if(err) {
++		err = -EINVAL;
++		goto out;
++	}
++
++	dir = dentry->d_parent->d_inode;
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = PTR_ERR(hidden_sto_dir_dentry);
++	if (IS_ERR(hidden_sto_dir_dentry))
++		goto out;
++
++	err = vfs_mkdir(hidden_sto_dir_dentry->d_inode,
++			hidden_sto_dentry,
++			mode);
++	if(err) {
++		printk(KERN_CRIT "mini_fo: create_sto_dir: ERROR creating sto dir.\n");
++		goto out_lock;
++	}
++
++	if(!dtohd2(dentry)->d_inode) {
++		printk(KERN_CRIT "mini_fo: create_sto_dir: ERROR creating sto dir [2].\n");
++		err = -EINVAL;
++		goto out_lock;
++	}
++
++	/* interpose the new inode */
++	if(dtost(dentry) == DELETED) {
++		dtost(dentry) = DEL_REWRITTEN;
++		err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0);
++		if(err)
++			goto out_lock;
++	}
++	else if(dtopd(dentry)->state == NON_EXISTANT) {
++		dtopd(dentry)->state = CREATED;
++		err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0);
++		if(err)
++			goto out_lock;
++	}
++	else if(dtopd(dentry)->state == UNMODIFIED) {
++		dtopd(dentry)->state = MODIFIED;
++		/* interpose on new inode */
++		if(itohi2(dentry->d_inode) != NULL) {
++			printk(KERN_CRIT "mini_fo:  create_sto_dir: ERROR, invalid inode detected.\n");
++			err = -EINVAL;
++			goto out_lock;
++		}
++		itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++	}
++
++	fist_copy_attr_timesizes(dir, hidden_sto_dir_dentry->d_inode);
++
++	/* initalize the wol list */
++	itopd(dentry->d_inode)->deleted_list_size = -1;
++	itopd(dentry->d_inode)->renamed_list_size = -1;
++	meta_build_lists(dentry);
++
++
++ out_lock:
++	/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++ out:
++	return err;
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++int create_sto_nod(dentry_t *dentry, int mode, dev_t dev)
++#else
++int create_sto_nod(dentry_t *dentry, int mode, int dev)
++#endif
++{
++	int err = 0;
++	inode_t *dir;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++
++	if(exists_in_storage(dentry)) {
++		err = -EEXIST;
++		goto out;
++	}
++	err = get_neg_sto_dentry(dentry);
++
++	if (err) {
++                printk(KERN_CRIT "mini_fo: create_sto_nod: ERROR getting neg. sto dentry.\n");
++                goto out;
++        }
++
++	dir = dentry->d_parent->d_inode;
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* lock parent */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = PTR_ERR(hidden_sto_dir_dentry);
++	if (IS_ERR(hidden_sto_dir_dentry))
++		goto out;
++
++	err = vfs_mknod(hidden_sto_dir_dentry->d_inode, hidden_sto_dentry, mode, dev);
++	if(err)
++		goto out_lock;
++
++	if(!dtohd2(dentry)->d_inode) {
++		printk(KERN_CRIT "mini_fo: create_sto_nod: creating storage inode failed [1].\n");
++		err = -EINVAL; /* return something indicating failure */
++		goto out_lock;
++	}
++
++	/* interpose the new inode */
++	if(dtost(dentry) == DELETED) {
++		dtost(dentry) = DEL_REWRITTEN;
++		err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0);
++		if(err)
++			goto out_lock;
++	}
++	else if(dtost(dentry) == NON_EXISTANT) {
++		dtost(dentry) = CREATED;
++		err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0);
++		if(err)
++			goto out_lock;
++	}
++	else if(dtost(dentry) == UNMODIFIED) {
++		dtost(dentry) = MODIFIED;
++		/* interpose on new inode */
++		if(itohi2(dentry->d_inode) != NULL) {
++			printk(KERN_CRIT "mini_fo: create_sto_nod: error, invalid inode detected.\n");
++			err = -EINVAL;
++			goto out_lock;
++		}
++		itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++	}
++
++	fist_copy_attr_timesizes(dir, hidden_sto_dir_dentry->d_inode);
++
++ out_lock:
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++ out:
++	return err;
++}
++
++
++/* unimplemented (and possibly not usefull):
++
++   nondir-del_to_del_rew
++   nondir-non_exist_to_creat
++
++   dir-unmod_to_del
++   dir-mod_to_del
++   dir-creat_to_del
++   dir-del_rew_to_del
++   dir-del_to_del_rew
++   dir-non_exist_to_creat
++*/
++
++
++/* bring a file of any type from state UNMODIFIED to MODIFIED */
++int nondir_unmod_to_mod(dentry_t *dentry, int cp_flag)
++{
++	int err = 0;
++	struct vfsmount *tgt_mnt;
++	struct vfsmount *src_mnt;
++	dentry_t *tgt_dentry;
++	dentry_t *src_dentry;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++
++	check_mini_fo_dentry(dentry);
++
++	if((dtost(dentry) != UNMODIFIED) ||
++	   S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++	err = get_neg_sto_dentry(dentry);
++
++	if (err) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                  ERROR getting neg. sto dentry.\n");
++		goto out;
++	}
++
++	/* create sto file */
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* lock parent */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++        down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = PTR_ERR(hidden_sto_dir_dentry);
++        if (IS_ERR(hidden_sto_dir_dentry))
++                goto out;
++
++	/* handle different types of nondirs */
++	if(S_ISCHR(dentry->d_inode->i_mode) ||
++	   S_ISBLK(dentry->d_inode->i_mode)) {
++		err = vfs_mknod(hidden_sto_dir_dentry->d_inode,
++				hidden_sto_dentry,
++				dtohd(dentry)->d_inode->i_mode,
++				dtohd(dentry)->d_inode->i_rdev);
++	}
++
++	else if(S_ISREG(dentry->d_inode->i_mode)) {
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		err = vfs_create(hidden_sto_dir_dentry->d_inode,
++				 hidden_sto_dentry,
++				 dtohd(dentry)->d_inode->i_mode, NULL);
++#else
++		err = vfs_create(hidden_sto_dir_dentry->d_inode,
++				 hidden_sto_dentry,
++				 dtohd(dentry)->d_inode->i_mode);
++#endif
++	}
++        if(err) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                  ERROR creating sto file.\n");
++                goto out_lock;
++	}
++
++	/* interpose on new inode */
++	if(itohi2(dentry->d_inode) != NULL) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                  ERROR, invalid inode detected.\n");
++		err = -EINVAL;
++		goto out_lock;
++	}
++
++	itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++
++        fist_copy_attr_timesizes(dentry->d_parent->d_inode,
++				 hidden_sto_dir_dentry->d_inode);
++	dtost(dentry) = MODIFIED;
++
++	/* copy contents if regular file and cp_flag = 1 */
++	if((cp_flag == 1) && S_ISREG(dentry->d_inode->i_mode)) {
++
++		/* unlock first */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++		dput(hidden_sto_dir_dentry);
++
++		tgt_dentry = dtohd2(dentry);
++		tgt_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++		src_dentry = dtohd(dentry);
++		src_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt;
++
++		err = mini_fo_cp_cont(tgt_dentry, tgt_mnt,
++				      src_dentry, src_mnt);
++		if(err) {
++			printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                          ERROR copying contents.\n");
++		}
++		goto out;
++	}
++
++ out_lock:
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++        dput(hidden_sto_dir_dentry);
++ out:
++	return err;
++}
++
++/* this function is currently identical to nondir_creat_to_del */
++int nondir_del_rew_to_del(dentry_t *dentry)
++{
++	return nondir_creat_to_del(dentry);
++}
++
++int nondir_creat_to_del(dentry_t *dentry)
++{
++	int err = 0;
++
++	inode_t *hidden_sto_dir_inode;
++	dentry_t *hidden_sto_dir_dentry;
++	dentry_t *hidden_sto_dentry;
++
++	check_mini_fo_dentry(dentry);
++
++	/* for now this function serves for both state DEL_REWRITTEN and
++	 * CREATED */
++	if(!(dtost(dentry) == CREATED || (dtost(dentry) == DEL_REWRITTEN)) ||
++	   S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: nondir_mod_to_del/del_rew_to_del: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++
++	hidden_sto_dir_inode = itohi2(dentry->d_parent->d_inode);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry);*/
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	/* avoid destroying the hidden inode if the file is in use */
++	dget(hidden_sto_dentry);
++	err = vfs_unlink(hidden_sto_dir_inode, hidden_sto_dentry);
++	dput(hidden_sto_dentry);
++	if(!err)
++		d_delete(hidden_sto_dentry);
++
++	/* propagate number of hard-links */
++	dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++
++	dtost(dentry) = NON_EXISTANT;
++
++	/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++
++ out:
++	return err;
++}
++
++int nondir_mod_to_del(dentry_t *dentry)
++{
++	int err;
++	dentry_t *hidden_sto_dentry;
++	inode_t *hidden_sto_dir_inode;
++	dentry_t *hidden_sto_dir_dentry;
++
++	check_mini_fo_dentry(dentry);
++
++	if(dtost(dentry) != MODIFIED ||
++	   S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: nondir_mod_to_del: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++
++	hidden_sto_dir_inode = itohi2(dentry->d_parent->d_inode);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* was hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	/* avoid destroying the hidden inode if the file is in use */
++	dget(hidden_sto_dentry);
++	err = vfs_unlink(hidden_sto_dir_inode, hidden_sto_dentry);
++	dput(hidden_sto_dentry);
++	if(!err)
++		d_delete(hidden_sto_dentry);
++
++	/* propagate number of hard-links */
++	dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++
++	/* dput base dentry, this will relase the inode and free the
++	 * dentry, as we will never need it again. */
++	dput(dtohd(dentry));
++	dtohd(dentry) = NULL;
++	dtost(dentry) = DELETED;
++
++	/* add deleted file to META-file */
++	meta_add_d_entry(dentry->d_parent,
++			 dentry->d_name.name,
++			 dentry->d_name.len);
++
++	/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++
++ out:
++	return err;
++}
++
++int nondir_unmod_to_del(dentry_t *dentry)
++{
++	int err = 0;
++
++	check_mini_fo_dentry(dentry);
++
++	if(dtost(dentry) != UNMODIFIED ||
++	   S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_del: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++
++	 /* next we have to get a negative dentry for the storage file */
++	err = get_neg_sto_dentry(dentry);
++
++	if(err)
++		goto out;
++
++	/* add deleted file to META lists */
++	err = meta_add_d_entry(dentry->d_parent,
++			       dentry->d_name.name,
++			       dentry->d_name.len);
++
++	if(err)
++		goto out;
++
++	/* dput base dentry, this will relase the inode and free the
++	 * dentry, as we will never need it again. */
++	dput(dtohd(dentry));
++	dtohd(dentry) = NULL;
++	dtost(dentry) = DELETED;
++
++ out:
++	return err;
++}
++
++/* bring a dir from state UNMODIFIED to MODIFIED */
++int dir_unmod_to_mod(dentry_t *dentry)
++{
++	int err;
++
++	check_mini_fo_dentry(dentry);
++
++	if(dtost(dentry) != UNMODIFIED ||
++	   !S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: dir_unmod_to_mod: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++
++	/* this creates our dir incl. sto. structure */
++	err = build_sto_structure(dentry->d_parent, dentry);
++	if(err) {
++		printk(KERN_CRIT "mini_fo: dir_unmod_to_mod: \
++                                  build_sto_structure failed.\n");
++		goto out;
++	}
++ out:
++	return err;
++}
++
+--- /dev/null
++++ b/fs/mini_fo/super.c
+@@ -0,0 +1,281 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++
++
++STATIC void
++mini_fo_read_inode(inode_t *inode)
++{
++	static struct address_space_operations mini_fo_empty_aops;
++
++	__itopd(inode) = kmalloc(sizeof(struct mini_fo_inode_info), GFP_KERNEL);
++	if (!itopd(inode)) {
++		printk("<0>%s:%s:%d: No kernel memory!\n", __FILE__, __FUNCTION__, __LINE__);
++		ASSERT(NULL);
++	}
++	itohi(inode) = NULL;
++	itohi2(inode) = NULL;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	inode->i_version++;
++#else
++	inode->i_version = ++event;	/* increment inode version */
++#endif
++	inode->i_op = &mini_fo_main_iops;
++	inode->i_fop = &mini_fo_main_fops;
++#if 0
++	/*
++	 * XXX: To export a file system via NFS, it has to have the
++	 * FS_REQUIRES_DEV flag, so turn it on.  But should we inherit it from
++	 * the lower file system, or can we allow our file system to be exported
++	 * even if the lower one cannot be natively exported.
++	 */
++	inode->i_sb->s_type->fs_flags |= FS_REQUIRES_DEV;
++	/*
++	 * OK, the above was a hack, which is now turned off because it may
++	 * cause a panic/oops on some systems.  The correct way to export a
++	 * "nodev" filesystem is via using nfs-utils > 1.0 and the "fsid=" export
++	 * parameter, which requires 2.4.20 or later.
++	 */
++#endif
++	/* I don't think ->a_ops is ever allowed to be NULL */
++	inode->i_mapping->a_ops = &mini_fo_empty_aops;
++}
++
++
++#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
++/*
++ * No need to call write_inode() on the lower inode, as it
++ * will have been marked 'dirty' anyway. But we might need
++ * to write some of our own stuff to disk.
++ */
++STATIC void
++mini_fo_write_inode(inode_t *inode, int sync)
++{
++	print_entry_location();
++	print_exit_location();
++}
++#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++
++
++STATIC void
++mini_fo_put_inode(inode_t *inode)
++{
++	/*
++	 * This is really funky stuff:
++	 * Basically, if i_count == 1, iput will then decrement it and this inode will be destroyed.
++	 * It is currently holding a reference to the hidden inode.
++	 * Therefore, it needs to release that reference by calling iput on the hidden inode.
++	 * iput() _will_ do it for us (by calling our clear_inode), but _only_ if i_nlink == 0.
++	 * The problem is, NFS keeps i_nlink == 1 for silly_rename'd files.
++	 * So we must for our i_nlink to 0 here to trick iput() into calling our clear_inode.
++	 */
++	if (atomic_read(&inode->i_count) == 1)
++		inode->i_nlink = 0;
++}
++
++
++#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
++/*
++ * we now define delete_inode, because there are two VFS paths that may
++ * destroy an inode: one of them calls clear inode before doing everything
++ * else that's needed, and the other is fine.  This way we truncate the inode
++ * size (and its pages) and then clear our own inode, which will do an iput
++ * on our and the lower inode.
++ */
++STATIC void
++mini_fo_delete_inode(inode_t *inode)
++{
++	print_entry_location();
++
++	fist_checkinode(inode, "mini_fo_delete_inode IN");
++	inode->i_size = 0;		/* every f/s seems to do that */
++	clear_inode(inode);
++
++	print_exit_location();
++}
++#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++
++
++/* final actions when unmounting a file system */
++STATIC void
++mini_fo_put_super(super_block_t *sb)
++{
++	if (stopd(sb)) {
++		mntput(stopd(sb)->hidden_mnt);
++		mntput(stopd(sb)->hidden_mnt2);
++
++		/* mk: no! dput(stopd(sb)->base_dir_dentry);
++		   dput(stopd(sb)->storage_dir_dentry); */
++
++		kfree(stopd(sb));
++		__stopd(sb) = NULL;
++	}
++}
++
++
++#ifdef NOT_NEEDED
++/*
++ * This is called in do_umount before put_super.
++ * The superblock lock is not held yet.
++ * We probably do not need to define this or call write_super
++ * on the hidden_sb, because sync_supers() will get to hidden_sb
++ * sooner or later.  But it is also called from file_fsync()...
++ */
++STATIC void
++mini_fo_write_super(super_block_t *sb)
++{
++	return;
++}
++#endif /* NOT_NEEDED */
++
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++mini_fo_statfs(struct dentry *d, struct kstatfs *buf)
++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_statfs(super_block_t *sb, struct kstatfs *buf)
++#else
++mini_fo_statfs(super_block_t *sb, struct statfs *buf)
++#endif
++{
++	int err = 0;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++	struct dentry *hidden_d;
++
++	hidden_d = dtohd(d);
++	err = vfs_statfs(hidden_d, buf);
++#else
++	super_block_t *hidden_sb;
++
++	hidden_sb = stohs(sb);
++	err = vfs_statfs(hidden_sb, buf);
++#endif
++
++	return err;
++}
++
++
++/*
++ * XXX: not implemented.  This is not allowed yet.
++ * Should we call this on the hidden_sb?  Probably not.
++ */
++STATIC int
++mini_fo_remount_fs(super_block_t *sb, int *flags, char *data)
++{
++	//printk(KERN_CRIT "mini_fo_remount_fs: WARNING, this function is umimplemented.\n");
++	return -ENOSYS;
++}
++
++
++/*
++ * Called by iput() when the inode reference count reached zero
++ * and the inode is not hashed anywhere.  Used to clear anything
++ * that needs to be, before the inode is completely destroyed and put
++ * on the inode free list.
++ */
++STATIC void
++mini_fo_clear_inode(inode_t *inode)
++{
++	/*
++	 * Decrement a reference to a hidden_inode, which was incremented
++	 * by our read_inode when it was created initially.
++	 */
++
++	/* release the wol_list */
++	if(S_ISDIR(inode->i_mode)) {
++		__meta_put_lists(inode);
++	}
++
++	/* mk: fan out fun */
++	if(itohi(inode))
++		iput(itohi(inode));
++	if(itohi2(inode))
++		iput(itohi2(inode));
++
++	// XXX: why this assertion fails?
++	// because it doesn't like us
++	// ASSERT((inode->i_state & I_DIRTY) == 0);
++	kfree(itopd(inode));
++	__itopd(inode) = NULL;
++}
++
++
++/*
++ * Called in do_umount() if the MNT_FORCE flag was used and this
++ * function is defined.  See comment in linux/fs/super.c:do_umount().
++ * Used only in nfs, to kill any pending RPC tasks, so that subsequent
++ * code can actually succeed and won't leave tasks that need handling.
++ *
++ * PS. I wonder if this is somehow useful to undo damage that was
++ * left in the kernel after a user level file server (such as amd)
++ * dies.
++ */
++STATIC void
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++mini_fo_umount_begin(struct vfsmount *mnt, int flags)
++{
++	struct vfsmount *hidden_mnt;
++
++	hidden_mnt = stopd(mnt->mnt_sb)->hidden_mnt;
++
++	if (hidden_mnt->mnt_sb->s_op->umount_begin)
++		hidden_mnt->mnt_sb->s_op->umount_begin(hidden_mnt, flags);
++
++}
++#else
++mini_fo_umount_begin(super_block_t *sb)
++{
++	super_block_t *hidden_sb;
++
++	hidden_sb = stohs(sb);
++
++	if (hidden_sb->s_op->umount_begin)
++		hidden_sb->s_op->umount_begin(hidden_sb);
++
++}
++#endif
++
++
++struct super_operations mini_fo_sops =
++{
++	read_inode:		mini_fo_read_inode,
++#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
++	write_inode:	mini_fo_write_inode,
++#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++	put_inode:		mini_fo_put_inode,
++#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
++	delete_inode:	mini_fo_delete_inode,
++#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++	put_super:		mini_fo_put_super,
++	statfs:		mini_fo_statfs,
++	remount_fs:		mini_fo_remount_fs,
++	clear_inode:	mini_fo_clear_inode,
++	umount_begin:	mini_fo_umount_begin,
++};
diff --git a/target/linux/generic/patches-2.6.25/210-mini_fo_2.6.25_fixes.patch b/target/linux/generic/patches-2.6.25/210-mini_fo_2.6.25_fixes.patch
new file mode 100644
index 0000000000..d71e3b6faa
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/210-mini_fo_2.6.25_fixes.patch
@@ -0,0 +1,143 @@
+--- a/fs/mini_fo/main.c
++++ b/fs/mini_fo/main.c
+@@ -79,6 +79,7 @@ mini_fo_tri_interpose(dentry_t *hidden_d
+ 	 * of the new inode's fields
+ 	 */
+ 
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,25)
+ 	/*
+ 	 * original: inode = iget(sb, hidden_inode->i_ino);
+ 	 */
+@@ -87,6 +88,13 @@ mini_fo_tri_interpose(dentry_t *hidden_d
+ 		err = -EACCES;		/* should be impossible??? */
+ 		goto out;
+ 	}
++#else
++	inode = mini_fo_iget(sb, iunique(sb, 25));
++	if (IS_ERR(inode)) {
++		err = PTR_ERR(inode);
++		goto out;
++	}
++#endif
+ 
+ 	/*
+ 	 * interpose the inode if not already interposed
+@@ -184,9 +192,9 @@ mini_fo_parse_options(super_block_t *sb,
+ 				hidden_root = ERR_PTR(err);
+ 				goto out;
+ 			}
+-			hidden_root = nd.dentry;
+-			stopd(sb)->base_dir_dentry = nd.dentry;
+-			stopd(sb)->hidden_mnt = nd.mnt;
++			hidden_root = nd_get_dentry(&nd);
++			stopd(sb)->base_dir_dentry = nd_get_dentry(&nd);
++			stopd(sb)->hidden_mnt = nd_get_mnt(&nd);
+ 
+ 		} else if(!strncmp("sto=", options, 4)) {
+ 			/* parse the storage dir */
+@@ -204,9 +212,9 @@ mini_fo_parse_options(super_block_t *sb,
+ 				hidden_root2 = ERR_PTR(err);
+ 				goto out;
+ 			}
+-			hidden_root2 = nd2.dentry;
+-			stopd(sb)->storage_dir_dentry = nd2.dentry;
+-			stopd(sb)->hidden_mnt2 = nd2.mnt;
++			hidden_root2 = nd_get_dentry(&nd2);
++			stopd(sb)->storage_dir_dentry = nd_get_dentry(&nd2);
++			stopd(sb)->hidden_mnt2 = nd_get_mnt(&nd2);
+ 			stohs2(sb) = hidden_root2->d_sb;
+ 
+ 			/* validate storage dir, this is done in
+--- a/fs/mini_fo/mini_fo.h
++++ b/fs/mini_fo/mini_fo.h
+@@ -302,6 +302,10 @@ extern int mini_fo_tri_interpose(dentry_
+ extern int mini_fo_cp_cont(dentry_t *tgt_dentry, struct vfsmount *tgt_mnt,
+ 			   dentry_t *src_dentry, struct vfsmount *src_mnt);
+ 
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25)
++extern struct inode *mini_fo_iget(struct super_block *sb, unsigned long ino);
++#endif
++
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+ extern int mini_fo_create(inode_t *dir, dentry_t *dentry, int mode, struct nameidata *nd);
+ 
+@@ -501,6 +505,29 @@ static inline void double_unlock(struct 
+ #endif  /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) */
+ #endif /* __KERNEL__ */
+ 
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25)
++static inline dentry_t *nd_get_dentry(struct nameidata *nd)
++{
++	return (nd->path.dentry);
++}
++
++static inline struct vfsmount *nd_get_mnt(struct nameidata *nd)
++{
++	return (nd->path.mnt);
++}
++#else
++static inline dentry_t *nd_get_dentry(struct nameidata *nd)
++{
++	return (nd->dentry);
++}
++
++static inline struct vfsmount *nd_get_mnt(struct nameidata *nd)
++{
++	return (nd->mnt);
++}
++#endif
++
+ /*
+  * Definitions for user and kernel code
+  */
+--- a/fs/mini_fo/super.c
++++ b/fs/mini_fo/super.c
+@@ -262,10 +262,31 @@ mini_fo_umount_begin(super_block_t *sb)
+ }
+ #endif
+ 
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25)
++struct inode *
++mini_fo_iget(struct super_block *sb, unsigned long ino)
++{
++	struct inode *inode;
++
++	inode = iget_locked(sb, ino);
++	if (!inode)
++		return ERR_PTR(-ENOMEM);
++
++	if (!(inode->i_state & I_NEW))
++		return inode;
++
++	mini_fo_read_inode(inode);
++
++	unlock_new_inode(inode);
++	return inode;
++}
++#endif /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25) */
+ 
+ struct super_operations mini_fo_sops =
+ {
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,25)
+ 	read_inode:		mini_fo_read_inode,
++#endif
+ #if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
+ 	write_inode:	mini_fo_write_inode,
+ #endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
+--- a/fs/mini_fo/aux.c
++++ b/fs/mini_fo/aux.c
+@@ -164,11 +164,11 @@ dentry_t *bpath_walk(super_block_t *sb, 
+ 	err = vfs_path_lookup(mnt->mnt_root, mnt, bpath+1, 0, &nd);
+ 
+ 	/* validate */
+-	if (err || !nd.dentry || !nd.dentry->d_inode) {
++	if (err || !nd_get_dentry(&nd) || !nd_get_dentry(&nd)->d_inode) {
+ 		printk(KERN_CRIT "mini_fo: bpath_walk: path_walk failed.\n");
+ 		return NULL;
+ 	}
+-	return nd.dentry;
++	return nd_get_dentry(&nd);
+ }
+ 
+ 
diff --git a/target/linux/generic/patches-2.6.25/211-mini_fo_2.6.25_dentry_open_war.patch b/target/linux/generic/patches-2.6.25/211-mini_fo_2.6.25_dentry_open_war.patch
new file mode 100644
index 0000000000..48a19429b9
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/211-mini_fo_2.6.25_dentry_open_war.patch
@@ -0,0 +1,66 @@
+--- a/fs/mini_fo/meta.c
++++ b/fs/mini_fo/meta.c
+@@ -442,6 +442,11 @@ int meta_write_d_entry(dentry_t *dentry,
+ 			   S_IRUSR | S_IWUSR);
+ #endif
+ 	}
++
++	/* $%& err, is this correct? */
++	meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++	mntget(meta_mnt);
++
+         /* open META-file for writing */
+         meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
+         if(!meta_file || IS_ERR(meta_file)) {
+@@ -535,6 +540,11 @@ int meta_write_r_entry(dentry_t *dentry,
+ 			   meta_dentry, S_IRUSR | S_IWUSR);
+ #endif
+ 	}
++
++	/* $%& err, is this correct? */
++	meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++	mntget(meta_mnt);
++
+         /* open META-file for writing */
+         meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
+         if(!meta_file || IS_ERR(meta_file)) {
+@@ -671,14 +681,16 @@ int meta_sync_d_list(dentry_t *dentry, i
+ 		}
+ 	}
+ 
++	/* $%& err, is this correct? */
++	meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++	mntget(meta_mnt);
++
+         /* open META-file for writing */
+         meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
+                                   ERROR opening meta file.\n");
+-		/* we don't mntget so we dont't mntput (for now)
+-		 * mntput(meta_mnt);
+-		 */
++		mntput(meta_mnt);
+ 		dput(meta_dentry);
+ 		err = -1;
+                 goto out;
+@@ -811,14 +823,16 @@ int meta_sync_r_list(dentry_t *dentry, i
+ 		}
+ 	}
+ 
++	/* $%& err, is this correct? */
++	meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++	mntget(meta_mnt);
++
+         /* open META-file for writing */
+         meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
+                                   ERROR opening meta file.\n");
+-		/* we don't mntget so we dont't mntput (for now)
+-		 * mntput(meta_mnt);
+-		 */
++		mntput(meta_mnt);
+ 		dput(meta_dentry);
+ 		err = -1;
+                 goto out;
diff --git a/target/linux/generic/patches-2.6.25/213-kobject_uevent.patch b/target/linux/generic/patches-2.6.25/213-kobject_uevent.patch
new file mode 100644
index 0000000000..f91db03bd7
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/213-kobject_uevent.patch
@@ -0,0 +1,42 @@
+--- a/lib/kobject_uevent.c
++++ b/lib/kobject_uevent.c
+@@ -27,7 +27,8 @@ u64 uevent_seqnum;
+ char uevent_helper[UEVENT_HELPER_PATH_LEN] = CONFIG_UEVENT_HELPER_PATH;
+ static DEFINE_SPINLOCK(sequence_lock);
+ #if defined(CONFIG_NET)
+-static struct sock *uevent_sock;
++struct sock *uevent_sock = NULL;
++EXPORT_SYMBOL_GPL(uevent_sock);
+ #endif
+ 
+ /* the strings here must match the enum in include/linux/kobject.h */
+@@ -40,6 +41,18 @@ static const char *kobject_actions[] = {
+ 	[KOBJ_OFFLINE] =	"offline",
+ };
+ 
++u64 uevent_next_seqnum(void)
++{
++	u64 seq;
++
++	spin_lock(&sequence_lock);
++	seq = ++uevent_seqnum;
++	spin_unlock(&sequence_lock);
++	
++	return seq;
++}
++EXPORT_SYMBOL_GPL(uevent_next_seqnum);
++
+ /**
+  * kobject_action_type - translate action string to numeric type
+  *
+@@ -192,9 +205,7 @@ int kobject_uevent_env(struct kobject *k
+ 		kobj->state_remove_uevent_sent = 1;
+ 
+ 	/* we will send an event, so request a new sequence number */
+-	spin_lock(&sequence_lock);
+-	seq = ++uevent_seqnum;
+-	spin_unlock(&sequence_lock);
++	seq = uevent_next_seqnum();
+ 	retval = add_uevent_var(env, "SEQNUM=%llu", (unsigned long long)seq);
+ 	if (retval)
+ 		goto exit;
diff --git a/target/linux/generic/patches-2.6.25/220-sound_kconfig.patch b/target/linux/generic/patches-2.6.25/220-sound_kconfig.patch
new file mode 100644
index 0000000000..d215d12077
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/220-sound_kconfig.patch
@@ -0,0 +1,11 @@
+--- a/sound/core/Kconfig
++++ b/sound/core/Kconfig
+@@ -9,7 +9,7 @@ config SND_PCM
+ 	depends on SND
+ 
+ config SND_HWDEP
+-	tristate
++	tristate "Sound hardware support"
+ 	depends on SND
+ 
+ config SND_RAWMIDI
diff --git a/target/linux/generic/patches-2.6.25/30-fix_conflicting_getline.patch b/target/linux/generic/patches-2.6.25/30-fix_conflicting_getline.patch
new file mode 100644
index 0000000000..0a68134f7a
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/30-fix_conflicting_getline.patch
@@ -0,0 +1,29 @@
+--- a/scripts/unifdef.c
++++ b/scripts/unifdef.c
+@@ -206,7 +206,7 @@ static void             done(void);
+ static void             error(const char *);
+ static int              findsym(const char *);
+ static void             flushline(bool);
+-static Linetype         getline(void);
++static Linetype         get_line(void);
+ static Linetype         ifeval(const char **);
+ static void             ignoreoff(void);
+ static void             ignoreon(void);
+@@ -512,7 +512,7 @@ process(void)
+ 
+ 	for (;;) {
+ 		linenum++;
+-		lineval = getline();
++		lineval = get_line();
+ 		trans_table[ifstate[depth]][lineval]();
+ 		debug("process %s -> %s depth %d",
+ 		    linetype_name[lineval],
+@@ -526,7 +526,7 @@ process(void)
+  * help from skipcomment().
+  */
+ static Linetype
+-getline(void)
++get_line(void)
+ {
+ 	const char *cp;
+ 	int cursym;
diff --git a/target/linux/generic/patches-2.6.25/400-ledtrig_morse.patch b/target/linux/generic/patches-2.6.25/400-ledtrig_morse.patch
new file mode 100644
index 0000000000..7208dde0ef
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/400-ledtrig_morse.patch
@@ -0,0 +1,18 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -181,4 +181,8 @@ config LEDS_TRIGGER_HEARTBEAT
+ 	  load average.
+ 	  If unsure, say Y.
+ 
++config LEDS_TRIGGER_MORSE
++	tristate "LED Morse Trigger"
++	depends on LEDS_TRIGGERS
++
+ endif # NEW_LEDS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -26,3 +26,4 @@ obj-$(CONFIG_LEDS_HP6XX)		+= leds-hp6xx.
+ obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
+ obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK)	+= ledtrig-ide-disk.o
+ obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT)	+= ledtrig-heartbeat.o
++obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o
diff --git a/target/linux/generic/patches-2.6.25/402-ledtrig_default_on.patch b/target/linux/generic/patches-2.6.25/402-ledtrig_default_on.patch
new file mode 100644
index 0000000000..d20eb5eae8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/402-ledtrig_default_on.patch
@@ -0,0 +1,21 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -185,4 +185,11 @@ config LEDS_TRIGGER_MORSE
+ 	tristate "LED Morse Trigger"
+ 	depends on LEDS_TRIGGERS
+ 
++config LEDS_TRIGGER_DEFAULT_ON
++	tristate "LED Default ON Trigger"
++	depends on LEDS_TRIGGERS
++	help
++	  This allows LEDs to be initialised in the ON state.
++	  If unsure, say Y.
++
+ endif # NEW_LEDS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -27,3 +27,4 @@ obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledt
+ obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK)	+= ledtrig-ide-disk.o
+ obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT)	+= ledtrig-heartbeat.o
+ obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o
++obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
diff --git a/target/linux/generic/patches-2.6.25/403-ds1672_detect.patch b/target/linux/generic/patches-2.6.25/403-ds1672_detect.patch
new file mode 100644
index 0000000000..86c26346a8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/403-ds1672_detect.patch
@@ -0,0 +1,16 @@
+--- a/drivers/rtc/rtc-ds1672.c
++++ b/drivers/rtc/rtc-ds1672.c
+@@ -13,10 +13,10 @@
+ #include <linux/i2c.h>
+ #include <linux/rtc.h>
+ 
+-#define DRV_VERSION "0.3"
++#define DRV_VERSION "0.4"
+ 
+-/* Addresses to scan: none. This chip cannot be detected. */
+-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
++/* Addresses to scan: 0x68 */
++static const unsigned short normal_i2c[] = { 0x68, I2C_CLIENT_END };
+ 
+ /* Insmod parameters */
+ I2C_CLIENT_INSMOD;
diff --git a/target/linux/generic/patches-2.6.25/410-gpio_buttons.patch b/target/linux/generic/patches-2.6.25/410-gpio_buttons.patch
new file mode 100644
index 0000000000..46ca987e53
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/410-gpio_buttons.patch
@@ -0,0 +1,30 @@
+--- a/drivers/input/misc/Kconfig
++++ b/drivers/input/misc/Kconfig
+@@ -197,4 +197,20 @@ config HP_SDC_RTC
+ 	  Say Y here if you want to support the built-in real time clock
+ 	  of the HP SDC controller.
+ 
++config INPUT_GPIO_BUTTONS
++	tristate "Polled GPIO buttons interface"
++	depends on GENERIC_GPIO
++	select INPUT_POLLDEV
++	help
++	  This driver implements support for buttons connected
++	  to GPIO pins of various CPUs (and some other chips).
++
++	  Say Y here if your device has buttons connected
++	  directly to such GPIO pins.  Your board-specific
++	  setup logic must also provide a platform device,
++	  with configuration data saying which GPIOs are used.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called gpio-buttons.
++
+ endif
+--- a/drivers/input/misc/Makefile
++++ b/drivers/input/misc/Makefile
+@@ -19,3 +19,4 @@ obj-$(CONFIG_INPUT_YEALINK)		+= yealink.
+ obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
+ obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
+ obj-$(CONFIG_INPUT_APANEL)		+= apanel.o
++obj-$(CONFIG_INPUT_GPIO_BUTTONS)	+= gpio_buttons.o
diff --git a/target/linux/generic/patches-2.6.25/420-gpiodev.patch b/target/linux/generic/patches-2.6.25/420-gpiodev.patch
new file mode 100644
index 0000000000..de8b57adf7
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/420-gpiodev.patch
@@ -0,0 +1,26 @@
+--- a/drivers/char/Kconfig
++++ b/drivers/char/Kconfig
+@@ -955,6 +955,13 @@ config CS5535_GPIO
+ 
+ 	  If compiled as a module, it will be called cs5535_gpio.
+ 
++config GPIO_DEVICE
++	tristate "GPIO device support"
++	depends on GENERIC_GPIO
++	help
++	  Say Y to enable Linux GPIO device support.  This allows control of
++	  GPIO pins using a character device
++
+ config GPIO_VR41XX
+ 	tristate "NEC VR4100 series General-purpose I/O Unit support"
+ 	depends on CPU_VR41XX
+--- a/drivers/char/Makefile
++++ b/drivers/char/Makefile
+@@ -94,6 +94,7 @@ obj-$(CONFIG_SCx200_GPIO)	+= scx200_gpio
+ obj-$(CONFIG_PC8736x_GPIO)	+= pc8736x_gpio.o
+ obj-$(CONFIG_NSC_GPIO)		+= nsc_gpio.o
+ obj-$(CONFIG_CS5535_GPIO)	+= cs5535_gpio.o
++obj-$(CONFIG_GPIO_DEVICE)	+= gpio_dev.o
+ obj-$(CONFIG_GPIO_VR41XX)	+= vr41xx_giu.o
+ obj-$(CONFIG_GPIO_TB0219)	+= tb0219.o
+ obj-$(CONFIG_TELCLOCK)		+= tlclk.o
diff --git a/target/linux/generic/patches-2.6.25/510-yaffs_support.patch b/target/linux/generic/patches-2.6.25/510-yaffs_support.patch
new file mode 100644
index 0000000000..cef6ea592e
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/510-yaffs_support.patch
@@ -0,0 +1,17 @@
+--- a/fs/Kconfig
++++ b/fs/Kconfig
+@@ -421,6 +421,7 @@ config FS_POSIX_ACL
+ 
+ source "fs/xfs/Kconfig"
+ source "fs/gfs2/Kconfig"
++source "fs/yaffs2/Kconfig"
+ 
+ config OCFS2_FS
+ 	tristate "OCFS2 file system support"
+--- a/fs/Makefile
++++ b/fs/Makefile
+@@ -121,3 +121,4 @@ obj-$(CONFIG_HPPFS)		+= hppfs/
+ obj-$(CONFIG_DEBUG_FS)		+= debugfs/
+ obj-$(CONFIG_OCFS2_FS)		+= ocfs2/
+ obj-$(CONFIG_GFS2_FS)           += gfs2/
++obj-$(CONFIG_YAFFS_FS)		+= yaffs2/
diff --git a/target/linux/generic/patches-2.6.25/512-yaffs_2.6.25_fix.patch b/target/linux/generic/patches-2.6.25/512-yaffs_2.6.25_fix.patch
new file mode 100644
index 0000000000..c127336346
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/512-yaffs_2.6.25_fix.patch
@@ -0,0 +1,92 @@
+--- a/fs/yaffs2/yaffs_fs.c
++++ b/fs/yaffs2/yaffs_fs.c
+@@ -181,7 +181,13 @@ static int yaffs_statfs(struct super_blo
+ #else
+ static int yaffs_statfs(struct super_block *sb, struct statfs *buf);
+ #endif
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25))
++static struct inode *yaffs_iget(struct super_block *sb, unsigned long ino);
++#else
+ static void yaffs_read_inode(struct inode *inode);
++#endif
++
+ 
+ static void yaffs_put_inode(struct inode *inode);
+ static void yaffs_delete_inode(struct inode *);
+@@ -284,7 +290,9 @@ static struct file_operations yaffs_dir_
+ 
+ static struct super_operations yaffs_super_ops = {
+ 	.statfs = yaffs_statfs,
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,25))
+ 	.read_inode = yaffs_read_inode,
++#endif
+ 	.put_inode = yaffs_put_inode,
+ 	.put_super = yaffs_put_super,
+ 	.delete_inode = yaffs_delete_inode,
+@@ -844,11 +852,17 @@ struct inode *yaffs_get_inode(struct sup
+ 	T(YAFFS_TRACE_OS,
+ 	  (KERN_DEBUG "yaffs_get_inode for object %d\n", obj->objectId));
+ 
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25))
++	inode = yaffs_iget(sb, obj->objectId);
++	if (IS_ERR(inode))
++		return NULL;
++#else
+ 	inode = iget(sb, obj->objectId);
+ 
+ 	/* NB Side effect: iget calls back to yaffs_read_inode(). */
+ 	/* iget also increments the inode's i_count */
+ 	/* NB You can't be holding grossLock or deadlock will happen! */
++#endif
+ 
+ 	return inode;
+ }
+@@ -1427,6 +1441,39 @@ static int yaffs_sync_fs(struct super_bl
+ }
+ 
+ 
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25))
++static struct inode *yaffs_iget(struct super_block *sb, unsigned long ino)
++{
++	yaffs_Object *obj;
++	yaffs_Device *dev = yaffs_SuperToDevice(sb);
++	struct inode *inode;
++
++	T(YAFFS_TRACE_OS,
++	  (KERN_DEBUG "yaffs_iget for %lu\n", ino));
++
++	inode = iget_locked(sb, ino);
++	if (!inode)
++		return ERR_PTR(-ENOMEM);
++	if (!(inode->i_state & I_NEW))
++		return inode;
++
++	/* NB This is called as a side effect of other functions, but
++	 * we had to release the lock to prevent deadlocks, so
++	 * need to lock again.
++	 */
++
++	yaffs_GrossLock(dev);
++
++	obj = yaffs_FindObjectByNumber(dev, inode->i_ino);
++
++	yaffs_FillInodeFromObject(inode, obj);
++
++	yaffs_GrossUnlock(dev);
++
++	unlock_new_inode(inode);
++	return inode;
++}
++#else
+ static void yaffs_read_inode(struct inode *inode)
+ {
+ 	/* NB This is called as a side effect of other functions, but
+@@ -1448,6 +1495,7 @@ static void yaffs_read_inode(struct inod
+ 
+ 	yaffs_GrossUnlock(dev);
+ }
++#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25)) */
+ 
+ static LIST_HEAD(yaffs_dev_list);
+ 
diff --git a/target/linux/generic/patches-2.6.25/600-phy_extension.patch b/target/linux/generic/patches-2.6.25/600-phy_extension.patch
new file mode 100644
index 0000000000..c4ef46529c
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/600-phy_extension.patch
@@ -0,0 +1,63 @@
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -348,6 +348,50 @@ int phy_ethtool_gset(struct phy_device *
+ }
+ EXPORT_SYMBOL(phy_ethtool_gset);
+ 
++int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr)
++{
++	u32 cmd;
++	int tmp;
++	struct ethtool_cmd ecmd = { ETHTOOL_GSET };
++	struct ethtool_value edata = { ETHTOOL_GLINK };
++
++	if (get_user(cmd, (u32 *) useraddr))
++		return -EFAULT;
++
++	switch (cmd) {
++	case ETHTOOL_GSET:
++		phy_ethtool_gset(phydev, &ecmd);
++		if (copy_to_user(useraddr, &ecmd, sizeof(ecmd)))
++			return -EFAULT;
++		return 0;
++	
++	case ETHTOOL_SSET:
++		if (copy_from_user(&ecmd, useraddr, sizeof(ecmd)))
++			return -EFAULT;
++		return phy_ethtool_sset(phydev, &ecmd);
++
++	case ETHTOOL_NWAY_RST:
++		/* if autoneg is off, it's an error */
++		tmp = phy_read(phydev, MII_BMCR);
++		if (tmp & BMCR_ANENABLE) {
++			tmp |= (BMCR_ANRESTART);
++			phy_write(phydev, MII_BMCR, tmp);
++			return 0;
++		}	
++		return -EINVAL;
++
++	case ETHTOOL_GLINK:
++		edata.data = (phy_read(phydev,
++				MII_BMSR) & BMSR_LSTATUS) ? 1 : 0;
++		if (copy_to_user(useraddr, &edata, sizeof(edata)))
++			return -EFAULT;
++		return 0;
++	}
++
++	return -EOPNOTSUPP;
++}
++EXPORT_SYMBOL(phy_ethtool_ioctl);
++
+ /**
+  * phy_mii_ioctl - generic PHY MII ioctl interface
+  * @phydev: the phy_device struct
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -399,6 +399,7 @@ void phy_start_machine(struct phy_device
+ void phy_stop_machine(struct phy_device *phydev);
+ int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
+ int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
++int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr);
+ int phy_mii_ioctl(struct phy_device *phydev,
+ 		struct mii_ioctl_data *mii_data, int cmd);
+ int phy_start_interrupts(struct phy_device *phydev);
diff --git a/target/linux/generic/patches-2.6.25/700-powerpc_git.patch b/target/linux/generic/patches-2.6.25/700-powerpc_git.patch
new file mode 100644
index 0000000000..a47129171f
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/700-powerpc_git.patch
@@ -0,0 +1,102433 @@
+--- a/Documentation/kernel-parameters.txt
++++ b/Documentation/kernel-parameters.txt
+@@ -930,6 +930,8 @@ and is between 256 and 4096 characters. 
+ 
+ 	l2cr=		[PPC]
+ 
++	l3cr=		[PPC]
++
+ 	lapic		[X86-32,APIC] Enable the local APIC even if BIOS
+ 			disabled it.
+ 
+--- a/Documentation/powerpc/booting-without-of.txt
++++ b/Documentation/powerpc/booting-without-of.txt
+@@ -59,12 +59,39 @@ Table of Contents
+       p) Freescale Synchronous Serial Interface
+ 	  q) USB EHCI controllers
+ 
+-  VII - Specifying interrupt information for devices
++  VII - Marvell Discovery mv64[345]6x System Controller chips
++    1) The /system-controller node
++    2) Child nodes of /system-controller
++      a) Marvell Discovery MDIO bus
++      b) Marvell Discovery ethernet controller
++      c) Marvell Discovery PHY nodes
++      d) Marvell Discovery SDMA nodes
++      e) Marvell Discovery BRG nodes
++      f) Marvell Discovery CUNIT nodes
++      g) Marvell Discovery MPSCROUTING nodes
++      h) Marvell Discovery MPSCINTR nodes
++      i) Marvell Discovery MPSC nodes
++      j) Marvell Discovery Watch Dog Timer nodes
++      k) Marvell Discovery I2C nodes
++      l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
++      m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
++      n) Marvell Discovery GPP (General Purpose Pins) nodes
++      o) Marvell Discovery PCI host bridge node
++      p) Marvell Discovery CPU Error nodes
++      q) Marvell Discovery SRAM Controller nodes
++      r) Marvell Discovery PCI Error Handler nodes
++      s) Marvell Discovery Memory Controller nodes
++
++  VIII - Specifying interrupt information for devices
+     1) interrupts property
+     2) interrupt-parent property
+     3) OpenPIC Interrupt Controllers
+     4) ISA Interrupt Controllers
+ 
++  VIII - Specifying GPIO information for devices
++    1) gpios property
++    2) gpio-controller nodes
++
+   Appendix A - Sample SOC node for MPC8540
+ 
+ 
+@@ -1269,10 +1296,6 @@ platforms are moved over to use the flat
+ 
+   Recommended properties:
+ 
+-    - linux,network-index : This is the intended "index" of this
+-      network device.  This is used by the bootwrapper to interpret
+-      MAC addresses passed by the firmware when no information other
+-      than indices is available to associate an address with a device.
+     - phy-connection-type : a string naming the controller/PHY interface type,
+       i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id", "sgmii",
+       "tbi", or "rtbi".  This property is only really needed if the connection
+@@ -1622,8 +1645,7 @@ platforms are moved over to use the flat
+    - device_type : should be "network", "hldc", "uart", "transparent"
+      "bisync", "atm", or "serial".
+    - compatible : could be "ucc_geth" or "fsl_atm" and so on.
+-   - model : should be "UCC".
+-   - device-id : the ucc number(1-8), corresponding to UCCx in UM.
++   - cell-index : the ucc number(1-8), corresponding to UCCx in UM.
+    - reg : Offset and length of the register set for the device
+    - interrupts : <a b> where a is the interrupt number and b is a
+      field that represents an encoding of the sense and level
+@@ -1667,10 +1689,6 @@ platforms are moved over to use the flat
+    - phy-handle : The phandle for the PHY connected to this controller.
+ 
+    Recommended properties:
+-   - linux,network-index : This is the intended "index" of this
+-     network device.  This is used by the bootwrapper to interpret
+-     MAC addresses passed by the firmware when no information other
+-     than indices is available to associate an address with a device.
+    - phy-connection-type : a string naming the controller/PHY interface type,
+      i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id" (Internal
+      Delay), "rgmii-txid" (delay on TX only), "rgmii-rxid" (delay on RX only),
+@@ -1680,8 +1698,7 @@ platforms are moved over to use the flat
+ 	ucc@2000 {
+ 		device_type = "network";
+ 		compatible = "ucc_geth";
+-		model = "UCC";
+-		device-id = <1>;
++		cell-index = <1>;
+ 		reg = <2000 200>;
+ 		interrupts = <a0 0>;
+ 		interrupt-parent = <700>;
+@@ -1995,7 +2012,6 @@ platforms are moved over to use the flat
+ 		interrupts = <20 8>;
+ 		interrupt-parent = <&PIC>;
+ 		phy-handle = <&PHY0>;
+-		linux,network-index = <0>;
+ 		fsl,cpm-command = <12000300>;
+ 	};
+ 
+@@ -2217,12 +2233,6 @@ platforms are moved over to use the flat
+ 			  EMAC, that is the content of the current (bogus) "phy-port"
+ 			  property.
+ 
+-    Recommended properties:
+-    - linux,network-index : This is the intended "index" of this
+-      network device.  This is used by the bootwrapper to interpret
+-      MAC addresses passed by the firmware when no information other
+-      than indices is available to associate an address with a device.
+-
+     Optional properties:
+     - phy-address       : 1 cell, optional, MDIO address of the PHY. If absent,
+ 			  a search is performed.
+@@ -2246,7 +2256,6 @@ platforms are moved over to use the flat
+     Example:
+ 
+ 	EMAC0: ethernet@40000800 {
+-		linux,network-index = <0>;
+ 		device_type = "network";
+ 		compatible = "ibm,emac-440gp", "ibm,emac";
+ 		interrupt-parent = <&UIC1>;
+@@ -2817,9 +2826,528 @@ platforms are moved over to use the flat
+ 	   };
+ 
+ 
+-   More devices will be defined as this spec matures.
++VII - Marvell Discovery mv64[345]6x System Controller chips
++===========================================================
++
++The Marvell mv64[345]60 series of system controller chips contain
++many of the peripherals needed to implement a complete computer
++system.  In this section, we define device tree nodes to describe
++the system controller chip itself and each of the peripherals
++which it contains.  Compatible string values for each node are
++prefixed with the string "marvell,", for Marvell Technology Group Ltd.
++
++1) The /system-controller node
++
++  This node is used to represent the system-controller and must be
++  present when the system uses a system contller chip. The top-level
++  system-controller node contains information that is global to all
++  devices within the system controller chip. The node name begins
++  with "system-controller" followed by the unit address, which is
++  the base address of the memory-mapped register set for the system
++  controller chip.
++
++  Required properties:
++
++    - ranges : Describes the translation of system controller addresses
++      for memory mapped registers.
++    - clock-frequency: Contains the main clock frequency for the system
++      controller chip.
++    - reg : This property defines the address and size of the
++      memory-mapped registers contained within the system controller
++      chip.  The address specified in the "reg" property should match
++      the unit address of the system-controller node.
++    - #address-cells : Address representation for system controller
++      devices.  This field represents the number of cells needed to
++      represent the address of the memory-mapped registers of devices
++      within the system controller chip.
++    - #size-cells : Size representation for for the memory-mapped
++      registers within the system controller chip.
++    - #interrupt-cells : Defines the width of cells used to represent
++      interrupts.
++
++  Optional properties:
++
++    - model : The specific model of the system controller chip.  Such
++      as, "mv64360", "mv64460", or "mv64560".
++    - compatible : A string identifying the compatibility identifiers
++      of the system controller chip.
++
++  The system-controller node contains child nodes for each system
++  controller device that the platform uses.  Nodes should not be created
++  for devices which exist on the system controller chip but are not used
++
++  Example Marvell Discovery mv64360 system-controller node:
++
++    system-controller@f1000000 { /* Marvell Discovery mv64360 */
++	    #address-cells = <1>;
++	    #size-cells = <1>;
++	    model = "mv64360";                      /* Default */
++	    compatible = "marvell,mv64360";
++	    clock-frequency = <133333333>;
++	    reg = <0xf1000000 0x10000>;
++	    virtual-reg = <0xf1000000>;
++	    ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
++		    0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
++		    0xa0000000 0xa0000000 0x4000000 /* User FLASH */
++		    0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
++		    0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
++
++	    [ child node definitions... ]
++    }
++
++2) Child nodes of /system-controller
++
++   a) Marvell Discovery MDIO bus
++
++   The MDIO is a bus to which the PHY devices are connected.  For each
++   device that exists on this bus, a child node should be created.  See
++   the definition of the PHY node below for an example of how to define
++   a PHY.
++
++   Required properties:
++     - #address-cells : Should be <1>
++     - #size-cells : Should be <0>
++     - device_type : Should be "mdio"
++     - compatible : Should be "marvell,mv64360-mdio"
++
++   Example:
++
++     mdio {
++	     #address-cells = <1>;
++	     #size-cells = <0>;
++	     device_type = "mdio";
++	     compatible = "marvell,mv64360-mdio";
++
++	     ethernet-phy@0 {
++		     ......
++	     };
++     };
++
++
++   b) Marvell Discovery ethernet controller
++
++   The Discover ethernet controller is described with two levels
++   of nodes.  The first level describes an ethernet silicon block
++   and the second level describes up to 3 ethernet nodes within
++   that block.  The reason for the multiple levels is that the
++   registers for the node are interleaved within a single set
++   of registers.  The "ethernet-block" level describes the
++   shared register set, and the "ethernet" nodes describe ethernet
++   port-specific properties.
++
++   Ethernet block node
++
++   Required properties:
++     - #address-cells : <1>
++     - #size-cells : <0>
++     - compatible : "marvell,mv64360-eth-block"
++     - reg : Offset and length of the register set for this block
++
++   Example Discovery Ethernet block node:
++     ethernet-block@2000 {
++	     #address-cells = <1>;
++	     #size-cells = <0>;
++	     compatible = "marvell,mv64360-eth-block";
++	     reg = <0x2000 0x2000>;
++	     ethernet@0 {
++		     .......
++	     };
++     };
++
++   Ethernet port node
++
++   Required properties:
++     - device_type : Should be "network".
++     - compatible : Should be "marvell,mv64360-eth".
++     - reg : Should be <0>, <1>, or <2>, according to which registers
++       within the silicon block the device uses.
++     - interrupts : <a> where a is the interrupt number for the port.
++     - interrupt-parent : the phandle for the interrupt controller
++       that services interrupts for this device.
++     - phy : the phandle for the PHY connected to this ethernet
++       controller.
++     - local-mac-address : 6 bytes, MAC address
++
++   Example Discovery Ethernet port node:
++     ethernet@0 {
++	     device_type = "network";
++	     compatible = "marvell,mv64360-eth";
++	     reg = <0>;
++	     interrupts = <32>;
++	     interrupt-parent = <&PIC>;
++	     phy = <&PHY0>;
++	     local-mac-address = [ 00 00 00 00 00 00 ];
++     };
++
++
++
++   c) Marvell Discovery PHY nodes
++
++   Required properties:
++     - device_type : Should be "ethernet-phy"
++     - interrupts : <a> where a is the interrupt number for this phy.
++     - interrupt-parent : the phandle for the interrupt controller that
++       services interrupts for this device.
++     - reg : The ID number for the phy, usually a small integer
++
++   Example Discovery PHY node:
++     ethernet-phy@1 {
++	     device_type = "ethernet-phy";
++	     compatible = "broadcom,bcm5421";
++	     interrupts = <76>;      /* GPP 12 */
++	     interrupt-parent = <&PIC>;
++	     reg = <1>;
++     };
++
++
++   d) Marvell Discovery SDMA nodes
++
++   Represent DMA hardware associated with the MPSC (multiprotocol
++   serial controllers).
++
++   Required properties:
++     - compatible : "marvell,mv64360-sdma"
++     - reg : Offset and length of the register set for this device
++     - interrupts : <a> where a is the interrupt number for the DMA
++       device.
++     - interrupt-parent : the phandle for the interrupt controller
++       that services interrupts for this device.
++
++   Example Discovery SDMA node:
++     sdma@4000 {
++	     compatible = "marvell,mv64360-sdma";
++	     reg = <0x4000 0xc18>;
++	     virtual-reg = <0xf1004000>;
++	     interrupts = <36>;
++	     interrupt-parent = <&PIC>;
++     };
++
++
++   e) Marvell Discovery BRG nodes
++
++   Represent baud rate generator hardware associated with the MPSC
++   (multiprotocol serial controllers).
++
++   Required properties:
++     - compatible : "marvell,mv64360-brg"
++     - reg : Offset and length of the register set for this device
++     - clock-src : A value from 0 to 15 which selects the clock
++       source for the baud rate generator.  This value corresponds
++       to the CLKS value in the BRGx configuration register.  See
++       the mv64x60 User's Manual.
++     - clock-frequence : The frequency (in Hz) of the baud rate
++       generator's input clock.
++     - current-speed : The current speed setting (presumably by
++       firmware) of the baud rate generator.
++
++   Example Discovery BRG node:
++     brg@b200 {
++	     compatible = "marvell,mv64360-brg";
++	     reg = <0xb200 0x8>;
++	     clock-src = <8>;
++	     clock-frequency = <133333333>;
++	     current-speed = <9600>;
++     };
++
++
++   f) Marvell Discovery CUNIT nodes
++
++   Represent the Serial Communications Unit device hardware.
++
++   Required properties:
++     - reg : Offset and length of the register set for this device
++
++   Example Discovery CUNIT node:
++     cunit@f200 {
++	     reg = <0xf200 0x200>;
++     };
++
++
++   g) Marvell Discovery MPSCROUTING nodes
++
++   Represent the Discovery's MPSC routing hardware
++
++   Required properties:
++     - reg : Offset and length of the register set for this device
++
++   Example Discovery CUNIT node:
++     mpscrouting@b500 {
++	     reg = <0xb400 0xc>;
++     };
++
++
++   h) Marvell Discovery MPSCINTR nodes
++
++   Represent the Discovery's MPSC DMA interrupt hardware registers
++   (SDMA cause and mask registers).
++
++   Required properties:
++     - reg : Offset and length of the register set for this device
++
++   Example Discovery MPSCINTR node:
++     mpsintr@b800 {
++	     reg = <0xb800 0x100>;
++     };
++
++
++   i) Marvell Discovery MPSC nodes
++
++   Represent the Discovery's MPSC (Multiprotocol Serial Controller)
++   serial port.
++
++   Required properties:
++     - device_type : "serial"
++     - compatible : "marvell,mv64360-mpsc"
++     - reg : Offset and length of the register set for this device
++     - sdma : the phandle for the SDMA node used by this port
++     - brg : the phandle for the BRG node used by this port
++     - cunit : the phandle for the CUNIT node used by this port
++     - mpscrouting : the phandle for the MPSCROUTING node used by this port
++     - mpscintr : the phandle for the MPSCINTR node used by this port
++     - cell-index : the hardware index of this cell in the MPSC core
++     - max_idle : value needed for MPSC CHR3 (Maximum Frame Length)
++       register
++     - interrupts : <a> where a is the interrupt number for the MPSC.
++     - interrupt-parent : the phandle for the interrupt controller
++       that services interrupts for this device.
++
++   Example Discovery MPSCINTR node:
++     mpsc@8000 {
++	     device_type = "serial";
++	     compatible = "marvell,mv64360-mpsc";
++	     reg = <0x8000 0x38>;
++	     virtual-reg = <0xf1008000>;
++	     sdma = <&SDMA0>;
++	     brg = <&BRG0>;
++	     cunit = <&CUNIT>;
++	     mpscrouting = <&MPSCROUTING>;
++	     mpscintr = <&MPSCINTR>;
++	     cell-index = <0>;
++	     max_idle = <40>;
++	     interrupts = <40>;
++	     interrupt-parent = <&PIC>;
++     };
++
+ 
+-VII - Specifying interrupt information for devices
++   j) Marvell Discovery Watch Dog Timer nodes
++
++   Represent the Discovery's watchdog timer hardware
++
++   Required properties:
++     - compatible : "marvell,mv64360-wdt"
++     - reg : Offset and length of the register set for this device
++
++   Example Discovery Watch Dog Timer node:
++     wdt@b410 {
++	     compatible = "marvell,mv64360-wdt";
++	     reg = <0xb410 0x8>;
++     };
++
++
++   k) Marvell Discovery I2C nodes
++
++   Represent the Discovery's I2C hardware
++
++   Required properties:
++     - device_type : "i2c"
++     - compatible : "marvell,mv64360-i2c"
++     - reg : Offset and length of the register set for this device
++     - interrupts : <a> where a is the interrupt number for the I2C.
++     - interrupt-parent : the phandle for the interrupt controller
++       that services interrupts for this device.
++
++   Example Discovery I2C node:
++	     compatible = "marvell,mv64360-i2c";
++	     reg = <0xc000 0x20>;
++	     virtual-reg = <0xf100c000>;
++	     interrupts = <37>;
++	     interrupt-parent = <&PIC>;
++     };
++
++
++   l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
++
++   Represent the Discovery's PIC hardware
++
++   Required properties:
++     - #interrupt-cells : <1>
++     - #address-cells : <0>
++     - compatible : "marvell,mv64360-pic"
++     - reg : Offset and length of the register set for this device
++     - interrupt-controller
++
++   Example Discovery PIC node:
++     pic {
++	     #interrupt-cells = <1>;
++	     #address-cells = <0>;
++	     compatible = "marvell,mv64360-pic";
++	     reg = <0x0 0x88>;
++	     interrupt-controller;
++     };
++
++
++   m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
++
++   Represent the Discovery's MPP hardware
++
++   Required properties:
++     - compatible : "marvell,mv64360-mpp"
++     - reg : Offset and length of the register set for this device
++
++   Example Discovery MPP node:
++     mpp@f000 {
++	     compatible = "marvell,mv64360-mpp";
++	     reg = <0xf000 0x10>;
++     };
++
++
++   n) Marvell Discovery GPP (General Purpose Pins) nodes
++
++   Represent the Discovery's GPP hardware
++
++   Required properties:
++     - compatible : "marvell,mv64360-gpp"
++     - reg : Offset and length of the register set for this device
++
++   Example Discovery GPP node:
++     gpp@f000 {
++	     compatible = "marvell,mv64360-gpp";
++	     reg = <0xf100 0x20>;
++     };
++
++
++   o) Marvell Discovery PCI host bridge node
++
++   Represents the Discovery's PCI host bridge device.  The properties
++   for this node conform to Rev 2.1 of the PCI Bus Binding to IEEE
++   1275-1994.  A typical value for the compatible property is
++   "marvell,mv64360-pci".
++
++   Example Discovery PCI host bridge node
++     pci@80000000 {
++	     #address-cells = <3>;
++	     #size-cells = <2>;
++	     #interrupt-cells = <1>;
++	     device_type = "pci";
++	     compatible = "marvell,mv64360-pci";
++	     reg = <0xcf8 0x8>;
++	     ranges = <0x01000000 0x0        0x0
++			     0x88000000 0x0 0x01000000
++		       0x02000000 0x0 0x80000000
++			     0x80000000 0x0 0x08000000>;
++	     bus-range = <0 255>;
++	     clock-frequency = <66000000>;
++	     interrupt-parent = <&PIC>;
++	     interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
++	     interrupt-map = <
++		     /* IDSEL 0x0a */
++		     0x5000 0 0 1 &PIC 80
++		     0x5000 0 0 2 &PIC 81
++		     0x5000 0 0 3 &PIC 91
++		     0x5000 0 0 4 &PIC 93
++
++		     /* IDSEL 0x0b */
++		     0x5800 0 0 1 &PIC 91
++		     0x5800 0 0 2 &PIC 93
++		     0x5800 0 0 3 &PIC 80
++		     0x5800 0 0 4 &PIC 81
++
++		     /* IDSEL 0x0c */
++		     0x6000 0 0 1 &PIC 91
++		     0x6000 0 0 2 &PIC 93
++		     0x6000 0 0 3 &PIC 80
++		     0x6000 0 0 4 &PIC 81
++
++		     /* IDSEL 0x0d */
++		     0x6800 0 0 1 &PIC 93
++		     0x6800 0 0 2 &PIC 80
++		     0x6800 0 0 3 &PIC 81
++		     0x6800 0 0 4 &PIC 91
++	     >;
++     };
++
++
++   p) Marvell Discovery CPU Error nodes
++
++   Represent the Discovery's CPU error handler device.
++
++   Required properties:
++     - compatible : "marvell,mv64360-cpu-error"
++     - reg : Offset and length of the register set for this device
++     - interrupts : the interrupt number for this device
++     - interrupt-parent : the phandle for the interrupt controller
++       that services interrupts for this device.
++
++   Example Discovery CPU Error node:
++     cpu-error@0070 {
++	     compatible = "marvell,mv64360-cpu-error";
++	     reg = <0x70 0x10 0x128 0x28>;
++	     interrupts = <3>;
++	     interrupt-parent = <&PIC>;
++     };
++
++
++   q) Marvell Discovery SRAM Controller nodes
++
++   Represent the Discovery's SRAM controller device.
++
++   Required properties:
++     - compatible : "marvell,mv64360-sram-ctrl"
++     - reg : Offset and length of the register set for this device
++     - interrupts : the interrupt number for this device
++     - interrupt-parent : the phandle for the interrupt controller
++       that services interrupts for this device.
++
++   Example Discovery SRAM Controller node:
++     sram-ctrl@0380 {
++	     compatible = "marvell,mv64360-sram-ctrl";
++	     reg = <0x380 0x80>;
++	     interrupts = <13>;
++	     interrupt-parent = <&PIC>;
++     };
++
++
++   r) Marvell Discovery PCI Error Handler nodes
++
++   Represent the Discovery's PCI error handler device.
++
++   Required properties:
++     - compatible : "marvell,mv64360-pci-error"
++     - reg : Offset and length of the register set for this device
++     - interrupts : the interrupt number for this device
++     - interrupt-parent : the phandle for the interrupt controller
++       that services interrupts for this device.
++
++   Example Discovery PCI Error Handler node:
++     pci-error@1d40 {
++	     compatible = "marvell,mv64360-pci-error";
++	     reg = <0x1d40 0x40 0xc28 0x4>;
++	     interrupts = <12>;
++	     interrupt-parent = <&PIC>;
++     };
++
++
++   s) Marvell Discovery Memory Controller nodes
++
++   Represent the Discovery's memory controller device.
++
++   Required properties:
++     - compatible : "marvell,mv64360-mem-ctrl"
++     - reg : Offset and length of the register set for this device
++     - interrupts : the interrupt number for this device
++     - interrupt-parent : the phandle for the interrupt controller
++       that services interrupts for this device.
++
++   Example Discovery Memory Controller node:
++     mem-ctrl@1400 {
++	     compatible = "marvell,mv64360-mem-ctrl";
++	     reg = <0x1400 0x60>;
++	     interrupts = <17>;
++	     interrupt-parent = <&PIC>;
++     };
++
++
++VIII - Specifying interrupt information for devices
+ ===================================================
+ 
+ The device tree represents the busses and devices of a hardware
+@@ -2905,6 +3433,54 @@ encodings listed below:
+ 	2 =  high to low edge sensitive type enabled
+ 	3 =  low to high edge sensitive type enabled
+ 
++VIII - Specifying GPIO information for devices
++==============================================
++
++1) gpios property
++-----------------
++
++Nodes that makes use of GPIOs should define them using `gpios' property,
++format of which is: <&gpio-controller1-phandle gpio1-specifier
++		     &gpio-controller2-phandle gpio2-specifier
++		     0 /* holes are permitted, means no GPIO 3 */
++		     &gpio-controller4-phandle gpio4-specifier
++		     ...>;
++
++Note that gpio-specifier length is controller dependent.
++
++gpio-specifier may encode: bank, pin position inside the bank,
++whether pin is open-drain and whether pin is logically inverted.
++
++Example of the node using GPIOs:
++
++	node {
++		gpios = <&qe_pio_e 18 0>;
++	};
++
++In this example gpio-specifier is "18 0" and encodes GPIO pin number,
++and empty GPIO flags as accepted by the "qe_pio_e" gpio-controller.
++
++2) gpio-controller nodes
++------------------------
++
++Every GPIO controller node must have #gpio-cells property defined,
++this information will be used to translate gpio-specifiers.
++
++Example of two SOC GPIO banks defined as gpio-controller nodes:
++
++	qe_pio_a: gpio-controller@1400 {
++		#gpio-cells = <2>;
++		compatible = "fsl,qe-pario-bank-a", "fsl,qe-pario-bank";
++		reg = <0x1400 0x18>;
++		gpio-controller;
++	};
++
++	qe_pio_e: gpio-controller@1460 {
++		#gpio-cells = <2>;
++		compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
++		reg = <0x1460 0x18>;
++		gpio-controller;
++	};
+ 
+ Appendix A - Sample SOC node for MPC8540
+ ========================================
+--- /dev/null
++++ b/Documentation/powerpc/phyp-assisted-dump.txt
+@@ -0,0 +1,127 @@
++
++                   Hypervisor-Assisted Dump
++                   ------------------------
++                       November 2007
++
++The goal of hypervisor-assisted dump is to enable the dump of
++a crashed system, and to do so from a fully-reset system, and
++to minimize the total elapsed time until the system is back
++in production use.
++
++As compared to kdump or other strategies, hypervisor-assisted
++dump offers several strong, practical advantages:
++
++-- Unlike kdump, the system has been reset, and loaded
++   with a fresh copy of the kernel.  In particular,
++   PCI and I/O devices have been reinitialized and are
++   in a clean, consistent state.
++-- As the dump is performed, the dumped memory becomes
++   immediately available to the system for normal use.
++-- After the dump is completed, no further reboots are
++   required; the system will be fully usable, and running
++   in it's normal, production mode on it normal kernel.
++
++The above can only be accomplished by coordination with,
++and assistance from the hypervisor. The procedure is
++as follows:
++
++-- When a system crashes, the hypervisor will save
++   the low 256MB of RAM to a previously registered
++   save region. It will also save system state, system
++   registers, and hardware PTE's.
++
++-- After the low 256MB area has been saved, the
++   hypervisor will reset PCI and other hardware state.
++   It will *not* clear RAM. It will then launch the
++   bootloader, as normal.
++
++-- The freshly booted kernel will notice that there
++   is a new node (ibm,dump-kernel) in the device tree,
++   indicating that there is crash data available from
++   a previous boot. It will boot into only 256MB of RAM,
++   reserving the rest of system memory.
++
++-- Userspace tools will parse /sys/kernel/release_region
++   and read /proc/vmcore to obtain the contents of memory,
++   which holds the previous crashed kernel. The userspace
++   tools may copy this info to disk, or network, nas, san,
++   iscsi, etc. as desired.
++
++   For Example: the values in /sys/kernel/release-region
++   would look something like this (address-range pairs).
++   CPU:0x177fee000-0x10000: HPTE:0x177ffe020-0x1000: /
++   DUMP:0x177fff020-0x10000000, 0x10000000-0x16F1D370A
++
++-- As the userspace tools complete saving a portion of
++   dump, they echo an offset and size to
++   /sys/kernel/release_region to release the reserved
++   memory back to general use.
++
++   An example of this is:
++     "echo 0x40000000 0x10000000 > /sys/kernel/release_region"
++   which will release 256MB at the 1GB boundary.
++
++Please note that the hypervisor-assisted dump feature
++is only available on Power6-based systems with recent
++firmware versions.
++
++Implementation details:
++----------------------
++
++During boot, a check is made to see if firmware supports
++this feature on this particular machine. If it does, then
++we check to see if a active dump is waiting for us. If yes
++then everything but 256 MB of RAM is reserved during early
++boot. This area is released once we collect a dump from user
++land scripts that are run. If there is dump data, then
++the /sys/kernel/release_region file is created, and
++the reserved memory is held.
++
++If there is no waiting dump data, then only the highest
++256MB of the ram is reserved as a scratch area. This area
++is *not* released: this region will be kept permanently
++reserved, so that it can act as a receptacle for a copy
++of the low 256MB in the case a crash does occur. See,
++however, "open issues" below, as to whether
++such a reserved region is really needed.
++
++Currently the dump will be copied from /proc/vmcore to a
++a new file upon user intervention. The starting address
++to be read and the range for each data point in provided
++in /sys/kernel/release_region.
++
++The tools to examine the dump will be same as the ones
++used for kdump.
++
++General notes:
++--------------
++Security: please note that there are potential security issues
++with any sort of dump mechanism. In particular, plaintext
++(unencrypted) data, and possibly passwords, may be present in
++the dump data. Userspace tools must take adequate precautions to
++preserve security.
++
++Open issues/ToDo:
++------------
++ o The various code paths that tell the hypervisor that a crash
++   occurred, vs. it simply being a normal reboot, should be
++   reviewed, and possibly clarified/fixed.
++
++ o Instead of using /sys/kernel, should there be a /sys/dump
++   instead? There is a dump_subsys being created by the s390 code,
++   perhaps the pseries code should use a similar layout as well.
++
++ o Is reserving a 256MB region really required? The goal of
++   reserving a 256MB scratch area is to make sure that no
++   important crash data is clobbered when the hypervisor
++   save low mem to the scratch area. But, if one could assure
++   that nothing important is located in some 256MB area, then
++   it would not need to be reserved. Something that can be
++   improved in subsequent versions.
++
++ o Still working the kdump team to integrate this with kdump,
++   some work remains but this would not affect the current
++   patches.
++
++ o Still need to write a shell script, to copy the dump away.
++   Currently I am parsing it manually.
+--- a/arch/powerpc/Kconfig
++++ b/arch/powerpc/Kconfig
+@@ -49,6 +49,19 @@ config IRQ_PER_CPU
+ 	bool
+ 	default y
+ 
++config STACKTRACE_SUPPORT
++	bool
++	default y
++
++config TRACE_IRQFLAGS_SUPPORT
++	bool
++	depends on PPC64
++	default y
++
++config LOCKDEP_SUPPORT
++	bool
++	default y
++
+ config RWSEM_GENERIC_SPINLOCK
+ 	bool
+ 
+@@ -81,6 +94,11 @@ config GENERIC_FIND_NEXT_BIT
+ 	bool
+ 	default y
+ 
++config GENERIC_GPIO
++	bool
++	help
++	  Generic GPIO API support
++
+ config ARCH_NO_VIRT_TO_BUS
+ 	def_bool PPC64
+ 
+@@ -91,6 +109,7 @@ config PPC
+ 	select HAVE_OPROFILE
+ 	select HAVE_KPROBES
+ 	select HAVE_KRETPROBES
++	select HAVE_LMB
+ 
+ config EARLY_PRINTK
+ 	bool
+@@ -210,15 +229,6 @@ source kernel/Kconfig.hz
+ source kernel/Kconfig.preempt
+ source "fs/Kconfig.binfmt"
+ 
+-# We optimistically allocate largepages from the VM, so make the limit
+-# large enough (16MB). This badly named config option is actually
+-# max order + 1
+-config FORCE_MAX_ZONEORDER
+-	int
+-	depends on PPC64
+-	default "9" if PPC_64K_PAGES
+-	default "13"
+-
+ config HUGETLB_PAGE_SIZE_VARIABLE
+ 	bool
+ 	depends on HUGETLB_PAGE
+@@ -307,6 +317,16 @@ config CRASH_DUMP
+ 
+ 	  Don't change this unless you know what you are doing.
+ 
++config PHYP_DUMP
++	bool "Hypervisor-assisted dump (EXPERIMENTAL)"
++	depends on PPC_PSERIES && EXPERIMENTAL
++	help
++	  Hypervisor-assisted dump is meant to be a kdump replacement
++	  offering robustness and speed not possible without system
++	  hypervisor assistence.
++
++	  If unsure, say "N"
++
+ config PPCBUG_NVRAM
+ 	bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC
+ 	default y if PPC_PREP
+@@ -381,6 +401,26 @@ config PPC_64K_PAGES
+ 	  while on hardware with such support, it will be used to map
+ 	  normal application pages.
+ 
++config FORCE_MAX_ZONEORDER
++	int "Maximum zone order"
++	default "9" if PPC_64K_PAGES
++	default "13" if PPC64 && !PPC_64K_PAGES
++	default "11"
++	help
++	  The kernel memory allocator divides physically contiguous memory
++	  blocks into "zones", where each zone is a power of two number of
++	  pages.  This option selects the largest power of two that the kernel
++	  keeps in the memory allocator.  If you need to allocate very large
++	  blocks of physically contiguous memory, then you may need to
++	  increase this value.
++
++	  This config option is actually maximum order plus one. For example,
++	  a value of 11 means that the largest free memory block is 2^10 pages.
++
++	  The page size is not necessarily 4KB.  For example, on 64-bit
++	  systems, 64KB pages can be enabled via CONFIG_PPC_64K_PAGES.  Keep
++	  this in mind when choosing a value for this option.
++
+ config PPC_SUBPAGE_PROT
+ 	bool "Support setting protections for 4k subpages"
+ 	depends on PPC_64K_PAGES
+@@ -490,6 +530,14 @@ config FSL_PCI
+  	bool
+ 	select PPC_INDIRECT_PCI
+ 
++config 4xx_SOC
++	bool
++
++config FSL_LBC
++	bool
++	help
++	  Freescale Localbus support
++
+ # Yes MCA RS/6000s exist but Linux-PPC does not currently support any
+ config MCA
+ 	bool
+@@ -663,22 +711,6 @@ config CONSISTENT_SIZE
+ 	hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
+ 	default "0x00200000" if NOT_COHERENT_CACHE
+ 
+-config BOOT_LOAD_BOOL
+-	bool "Set the boot link/load address"
+-	depends on ADVANCED_OPTIONS && !PPC_MULTIPLATFORM
+-	help
+-	  This option allows you to set the initial load address of the zImage
+-	  or zImage.initrd file.  This can be useful if you are on a board
+-	  which has a small amount of memory.
+-
+-	  Say N here unless you know what you are doing.
+-
+-config BOOT_LOAD
+-	hex "Link/load address for booting" if BOOT_LOAD_BOOL
+-	default "0x00400000" if 40x || 8xx || 8260
+-	default "0x01000000" if 44x
+-	default "0x00800000"
+-
+ config PIN_TLB
+ 	bool "Pinned Kernel TLBs (860 ONLY)"
+ 	depends on ADVANCED_OPTIONS && 8xx
+--- a/arch/powerpc/Kconfig.debug
++++ b/arch/powerpc/Kconfig.debug
+@@ -269,7 +269,7 @@ config PPC_EARLY_DEBUG_CPM_ADDR
+ 	hex "CPM UART early debug transmit descriptor address"
+ 	depends on PPC_EARLY_DEBUG_CPM
+ 	default "0xfa202008" if PPC_EP88XC
+-	default "0xf0000008" if CPM2
++	default "0xf0001ff8" if CPM2
+ 	default "0xff002008" if CPM1
+ 	help
+ 	  This specifies the address of the transmit descriptor
+--- a/arch/powerpc/Makefile
++++ b/arch/powerpc/Makefile
+@@ -71,13 +71,11 @@ endif
+ 
+ LDFLAGS_vmlinux	:= -Bstatic
+ 
+-CPPFLAGS-$(CONFIG_PPC32) := -Iarch/$(ARCH)
+-AFLAGS-$(CONFIG_PPC32)	:= -Iarch/$(ARCH)
+ CFLAGS-$(CONFIG_PPC64)	:= -mminimal-toc -mtraceback=none  -mcall-aixdesc
+-CFLAGS-$(CONFIG_PPC32)	:= -Iarch/$(ARCH) -ffixed-r2 -mmultiple
+-KBUILD_CPPFLAGS	+= $(CPPFLAGS-y)
+-KBUILD_AFLAGS	+= $(AFLAGS-y)
+-KBUILD_CFLAGS	+= -msoft-float -pipe $(CFLAGS-y)
++CFLAGS-$(CONFIG_PPC32)	:= -ffixed-r2 -mmultiple
++KBUILD_CPPFLAGS	+= -Iarch/$(ARCH)
++KBUILD_AFLAGS	+= -Iarch/$(ARCH)
++KBUILD_CFLAGS	+= -msoft-float -pipe -Iarch/$(ARCH) $(CFLAGS-y)
+ CPP		= $(CC) -E $(KBUILD_CFLAGS)
+ 
+ CHECKFLAGS	+= -m$(CONFIG_WORD_SIZE) -D__powerpc__ -D__powerpc$(CONFIG_WORD_SIZE)__
+@@ -164,7 +162,7 @@ boot := arch/$(ARCH)/boot
+ $(BOOT_TARGETS): vmlinux
+ 	$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
+ 
+-bootwrapper_install:
++bootwrapper_install %.dtb:
+ 	$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
+ 
+ define archhelp
+--- a/arch/powerpc/boot/Makefile
++++ b/arch/powerpc/boot/Makefile
+@@ -40,6 +40,7 @@ $(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
+ $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
+ $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
+ $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
++$(obj)/virtex405-head.o: BOOTCFLAGS += -mcpu=405
+ 
+ 
+ zlib       := inffast.c inflate.c inftrees.c
+@@ -64,7 +65,8 @@ src-plat := of.c cuboot-52xx.c cuboot-82
+ 		cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
+ 		fixed-head.S ep88xc.c ep405.c \
+ 		cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
+-		cuboot-warp.c cuboot-85xx-cpm2.c
++		cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
++		virtex405-head.S
+ src-boot := $(src-wlib) $(src-plat) empty.c
+ 
+ src-boot := $(addprefix $(obj)/, $(src-boot))
+@@ -192,7 +194,7 @@ image-$(CONFIG_PPC_CHRP)		+= zImage.chrp
+ image-$(CONFIG_PPC_EFIKA)		+= zImage.chrp
+ image-$(CONFIG_PPC_PMAC)		+= zImage.pmac
+ image-$(CONFIG_PPC_HOLLY)		+= zImage.holly
+-image-$(CONFIG_PPC_PRPMC2800)		+= zImage.prpmc2800
++image-$(CONFIG_PPC_PRPMC2800)		+= dtbImage.prpmc2800
+ image-$(CONFIG_PPC_ISERIES)		+= zImage.iseries
+ image-$(CONFIG_DEFAULT_UIMAGE)		+= uImage
+ 
+@@ -216,6 +218,7 @@ image-$(CONFIG_RAINIER)			+= cuImage.rai
+ image-$(CONFIG_TAISHAN)			+= cuImage.taishan
+ image-$(CONFIG_KATMAI)			+= cuImage.katmai
+ image-$(CONFIG_WARP)			+= cuImage.warp
++image-$(CONFIG_YOSEMITE)		+= cuImage.yosemite
+ 
+ # Board ports in arch/powerpc/platform/8xx/Kconfig
+ image-$(CONFIG_PPC_MPC86XADS)		+= cuImage.mpc866ads
+@@ -255,6 +258,7 @@ image-$(CONFIG_TQM8555)			+= cuImage.tqm
+ image-$(CONFIG_TQM8560)			+= cuImage.tqm8560
+ image-$(CONFIG_SBC8548)			+= cuImage.sbc8548
+ image-$(CONFIG_SBC8560)			+= cuImage.sbc8560
++image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
+ 
+ # Board ports in arch/powerpc/platform/embedded6xx/Kconfig
+ image-$(CONFIG_STORCENTER)		+= cuImage.storcenter
+@@ -285,11 +289,11 @@ $(obj)/zImage.%: vmlinux $(wrapperbits)
+ 	$(call if_changed,wrap,$*)
+ 
+ # dtbImage% - a dtbImage is a zImage with an embedded device tree blob
+-$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(dtstree)/%.dts
+-	$(call if_changed,wrap,$*,$(dtstree)/$*.dts,,$(obj)/ramdisk.image.gz)
++$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/%.dtb
++	$(call if_changed,wrap,$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
+ 
+-$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(dtstree)/%.dts
+-	$(call if_changed,wrap,$*,$(dtstree)/$*.dts)
++$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/%.dtb
++	$(call if_changed,wrap,$*,,$(obj)/$*.dtb)
+ 
+ # This cannot be in the root of $(src) as the zImage rule always adds a $(obj)
+ # prefix
+@@ -302,14 +306,24 @@ $(obj)/zImage.iseries: vmlinux
+ $(obj)/uImage: vmlinux $(wrapperbits)
+ 	$(call if_changed,wrap,uboot)
+ 
+-$(obj)/cuImage.%: vmlinux $(dtstree)/%.dts $(wrapperbits)
+-	$(call if_changed,wrap,cuboot-$*,$(dtstree)/$*.dts)
++$(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
++	$(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb)
+ 
+-$(obj)/treeImage.initrd.%: vmlinux $(dtstree)/%.dts $(wrapperbits)
+-	$(call if_changed,wrap,treeboot-$*,$(dtstree)/$*.dts,,$(obj)/ramdisk.image.gz)
++$(obj)/simpleImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
++	$(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
+ 
+-$(obj)/treeImage.%: vmlinux $(dtstree)/%.dts $(wrapperbits)
+-	$(call if_changed,wrap,treeboot-$*,$(dtstree)/$*.dts)
++$(obj)/simpleImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
++	$(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb)
++
++$(obj)/treeImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
++	$(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
++
++$(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
++	$(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb)
++
++# Rule to build device tree blobs
++$(obj)/%.dtb: $(dtstree)/%.dts $(obj)/dtc
++	$(obj)/dtc -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts
+ 
+ # If there isn't a platform selected then just strip the vmlinux.
+ ifeq (,$(image-y))
+@@ -326,7 +340,7 @@ install: $(CONFIGURE) $(addprefix $(obj)
+ 
+ # anything not in $(targets)
+ clean-files += $(image-) $(initrd-) zImage zImage.initrd cuImage.* treeImage.* \
+-	otheros.bld
++	otheros.bld *.dtb
+ 
+ # clean up files cached by wrapper
+ clean-kernel := vmlinux.strip vmlinux.bin
+--- a/arch/powerpc/boot/bamboo.c
++++ b/arch/powerpc/boot/bamboo.c
+@@ -33,7 +33,8 @@ static void bamboo_fixups(void)
+ 	ibm440ep_fixup_clocks(sysclk, 11059200, 25000000);
+ 	ibm4xx_sdram_fixup_memsize();
+ 	ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00);
+-	dt_fixup_mac_addresses(bamboo_mac0, bamboo_mac1);
++	dt_fixup_mac_address_by_alias("ethernet0", bamboo_mac0);
++	dt_fixup_mac_address_by_alias("ethernet1", bamboo_mac1);
+ }
+ 
+ void bamboo_init(void *mac0, void *mac1)
+--- a/arch/powerpc/boot/cpm-serial.c
++++ b/arch/powerpc/boot/cpm-serial.c
+@@ -11,6 +11,7 @@
+ #include "types.h"
+ #include "io.h"
+ #include "ops.h"
++#include "page.h"
+ 
+ struct cpm_scc {
+ 	u32 gsmrl;
+@@ -42,6 +43,22 @@ struct cpm_param {
+ 	u16 tbase;
+ 	u8 rfcr;
+ 	u8 tfcr;
++	u16 mrblr;
++	u32 rstate;
++	u8 res1[4];
++	u16 rbptr;
++	u8 res2[6];
++	u32 tstate;
++	u8 res3[4];
++	u16 tbptr;
++	u8 res4[6];
++	u16 maxidl;
++	u16 idlc;
++	u16 brkln;
++	u16 brkec;
++	u16 brkcr;
++	u16 rmask;
++	u8 res5[4];
+ };
+ 
+ struct cpm_bd {
+@@ -54,10 +71,10 @@ static void *cpcr;
+ static struct cpm_param *param;
+ static struct cpm_smc *smc;
+ static struct cpm_scc *scc;
+-struct cpm_bd *tbdf, *rbdf;
++static struct cpm_bd *tbdf, *rbdf;
+ static u32 cpm_cmd;
+-static u8 *muram_start;
+-static u32 muram_offset;
++static void *cbd_addr;
++static u32 cbd_offset;
+ 
+ static void (*do_cmd)(int op);
+ static void (*enable_port)(void);
+@@ -119,20 +136,25 @@ static int cpm_serial_open(void)
+ 
+ 	out_8(&param->rfcr, 0x10);
+ 	out_8(&param->tfcr, 0x10);
++	out_be16(&param->mrblr, 1);
++	out_be16(&param->maxidl, 0);
++	out_be16(&param->brkec, 0);
++	out_be16(&param->brkln, 0);
++	out_be16(&param->brkcr, 0);
+ 
+-	rbdf = (struct cpm_bd *)muram_start;
+-	rbdf->addr = (u8 *)(rbdf + 2);
++	rbdf = cbd_addr;
++	rbdf->addr = (u8 *)rbdf - 1;
+ 	rbdf->sc = 0xa000;
+ 	rbdf->len = 1;
+ 
+ 	tbdf = rbdf + 1;
+-	tbdf->addr = (u8 *)(rbdf + 2) + 1;
++	tbdf->addr = (u8 *)rbdf - 2;
+ 	tbdf->sc = 0x2000;
+ 	tbdf->len = 1;
+ 
+ 	sync();
+-	out_be16(&param->rbase, muram_offset);
+-	out_be16(&param->tbase, muram_offset + sizeof(struct cpm_bd));
++	out_be16(&param->rbase, cbd_offset);
++	out_be16(&param->tbase, cbd_offset + sizeof(struct cpm_bd));
+ 
+ 	do_cmd(CPM_CMD_INIT_RX_TX);
+ 
+@@ -175,10 +197,12 @@ static unsigned char cpm_serial_getc(voi
+ 
+ int cpm_console_init(void *devp, struct serial_console_data *scdp)
+ {
+-	void *reg_virt[2];
+-	int is_smc = 0, is_cpm2 = 0, n;
+-	unsigned long reg_phys;
++	void *vreg[2];
++	u32 reg[2];
++	int is_smc = 0, is_cpm2 = 0;
+ 	void *parent, *muram;
++	void *muram_addr;
++	unsigned long muram_offset, muram_size;
+ 
+ 	if (dt_is_compatible(devp, "fsl,cpm1-smc-uart")) {
+ 		is_smc = 1;
+@@ -202,63 +226,64 @@ int cpm_console_init(void *devp, struct 
+ 	else
+ 		do_cmd = cpm1_cmd;
+ 
+-	n = getprop(devp, "fsl,cpm-command", &cpm_cmd, 4);
+-	if (n < 4)
++	if (getprop(devp, "fsl,cpm-command", &cpm_cmd, 4) < 4)
+ 		return -1;
+ 
+-	n = getprop(devp, "virtual-reg", reg_virt, sizeof(reg_virt));
+-	if (n < (int)sizeof(reg_virt)) {
+-		for (n = 0; n < 2; n++) {
+-			if (!dt_xlate_reg(devp, n, &reg_phys, NULL))
+-				return -1;
+-
+-			reg_virt[n] = (void *)reg_phys;
+-		}
+-	}
++	if (dt_get_virtual_reg(devp, vreg, 2) < 2)
++		return -1;
+ 
+ 	if (is_smc)
+-		smc = reg_virt[0];
++		smc = vreg[0];
+ 	else
+-		scc = reg_virt[0];
++		scc = vreg[0];
+ 
+-	param = reg_virt[1];
++	param = vreg[1];
+ 
+ 	parent = get_parent(devp);
+ 	if (!parent)
+ 		return -1;
+ 
+-	n = getprop(parent, "virtual-reg", reg_virt, sizeof(reg_virt));
+-	if (n < (int)sizeof(reg_virt)) {
+-		if (!dt_xlate_reg(parent, 0, &reg_phys, NULL))
+-			return -1;
+-
+-		reg_virt[0] = (void *)reg_phys;
+-	}
+-
+-	cpcr = reg_virt[0];
++	if (dt_get_virtual_reg(parent, &cpcr, 1) < 1)
++		return -1;
+ 
+ 	muram = finddevice("/soc/cpm/muram/data");
+ 	if (!muram)
+ 		return -1;
+ 
+ 	/* For bootwrapper-compatible device trees, we assume that the first
+-	 * entry has at least 18 bytes, and that #address-cells/#data-cells
++	 * entry has at least 128 bytes, and that #address-cells/#data-cells
+ 	 * is one for both parent and child.
+ 	 */
+ 
+-	n = getprop(muram, "virtual-reg", reg_virt, sizeof(reg_virt));
+-	if (n < (int)sizeof(reg_virt)) {
+-		if (!dt_xlate_reg(muram, 0, &reg_phys, NULL))
+-			return -1;
++	if (dt_get_virtual_reg(muram, &muram_addr, 1) < 1)
++		return -1;
++
++	if (getprop(muram, "reg", reg, 8) < 8)
++		return -1;
++
++	muram_offset = reg[0];
++	muram_size = reg[1];
++
++	/* Store the buffer descriptors at the end of the first muram chunk.
++	 * For SMC ports on CPM2-based platforms, relocate the parameter RAM
++	 * just before the buffer descriptors.
++	 */
++
++	cbd_offset = muram_offset + muram_size - 2 * sizeof(struct cpm_bd);
+ 
+-		reg_virt[0] = (void *)reg_phys;
++	if (is_cpm2 && is_smc) {
++		u16 *smc_base = (u16 *)param;
++		u16 pram_offset;
++
++		pram_offset = cbd_offset - 64;
++		pram_offset = _ALIGN_DOWN(pram_offset, 64);
++
++		disable_port();
++		out_be16(smc_base, pram_offset);
++		param = muram_addr - muram_offset + pram_offset;
+ 	}
+ 
+-	muram_start = reg_virt[0];
+-
+-	n = getprop(muram, "reg", &muram_offset, 4);
+-	if (n < 4)
+-		return -1;
++	cbd_addr = muram_addr - muram_offset + cbd_offset;
+ 
+ 	scdp->open = cpm_serial_open;
+ 	scdp->putc = cpm_serial_putc;
+--- a/arch/powerpc/boot/cuboot-pq2.c
++++ b/arch/powerpc/boot/cuboot-pq2.c
+@@ -128,7 +128,7 @@ static void fixup_pci(void)
+ 	u8 *soc_regs;
+ 	int i, len;
+ 	void *node, *parent_node;
+-	u32 naddr, nsize, mem_log2;
++	u32 naddr, nsize, mem_pow2, mem_mask;
+ 
+ 	node = finddevice("/pci");
+ 	if (!node || !dt_is_compatible(node, "fsl,pq2-pci"))
+@@ -141,7 +141,7 @@ static void fixup_pci(void)
+ 
+ 	soc_regs = (u8 *)fsl_get_immr();
+ 	if (!soc_regs)
+-		goto err;
++		goto unhandled;
+ 
+ 	dt_get_reg_format(node, &naddr, &nsize);
+ 	if (naddr != 3 || nsize != 2)
+@@ -153,7 +153,7 @@ static void fixup_pci(void)
+ 
+ 	dt_get_reg_format(parent_node, &naddr, &nsize);
+ 	if (naddr != 1 || nsize != 1)
+-		goto err;
++		goto unhandled;
+ 
+ 	len = getprop(node, "ranges", pci_ranges_buf,
+ 	              sizeof(pci_ranges_buf));
+@@ -170,14 +170,20 @@ static void fixup_pci(void)
+ 	}
+ 
+ 	if (!mem || !mmio || !io)
+-		goto err;
++		goto unhandled;
++	if (mem->size[1] != mmio->size[1])
++		goto unhandled;
++	if (mem->size[1] & (mem->size[1] - 1))
++		goto unhandled;
++	if (io->size[1] & (io->size[1] - 1))
++		goto unhandled;
+ 
+ 	if (mem->phys_addr + mem->size[1] == mmio->phys_addr)
+ 		mem_base = mem;
+ 	else if (mmio->phys_addr + mmio->size[1] == mem->phys_addr)
+ 		mem_base = mmio;
+ 	else
+-		goto err;
++		goto unhandled;
+ 
+ 	out_be32(&pci_regs[1][0], mem_base->phys_addr | 1);
+ 	out_be32(&pci_regs[2][0], ~(mem->size[1] + mmio->size[1] - 1));
+@@ -201,8 +207,9 @@ static void fixup_pci(void)
+ 	out_le32(&pci_regs[0][58], 0);
+ 	out_le32(&pci_regs[0][60], 0);
+ 
+-	mem_log2 = 1 << (__ilog2_u32(bd.bi_memsize - 1) + 1);
+-	out_le32(&pci_regs[0][62], 0xa0000000 | ~((1 << (mem_log2 - 12)) - 1));
++	mem_pow2 = 1 << (__ilog2_u32(bd.bi_memsize - 1) + 1);
++	mem_mask = ~(mem_pow2 - 1) >> 12;
++	out_le32(&pci_regs[0][62], 0xa0000000 | mem_mask);
+ 
+ 	/* If PCI is disabled, drive RST high to enable. */
+ 	if (!(in_le32(&pci_regs[0][32]) & 1)) {
+@@ -228,7 +235,11 @@ static void fixup_pci(void)
+ 	return;
+ 
+ err:
+-	printf("Bad PCI node\r\n");
++	printf("Bad PCI node -- using existing firmware setup.\r\n");
++	return;
++
++unhandled:
++	printf("Unsupported PCI node -- using existing firmware setup.\r\n");
+ }
+ 
+ static void pq2_platform_fixups(void)
+--- a/arch/powerpc/boot/cuboot-rainier.c
++++ b/arch/powerpc/boot/cuboot-rainier.c
+@@ -42,7 +42,8 @@ static void rainier_fixups(void)
+ 	ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
+ 	ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
+ 	ibm4xx_denali_fixup_memsize();
+-	dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
++	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
++	dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
+ }
+ 
+ void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+--- a/arch/powerpc/boot/cuboot-sequoia.c
++++ b/arch/powerpc/boot/cuboot-sequoia.c
+@@ -42,7 +42,8 @@ static void sequoia_fixups(void)
+ 	ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
+ 	ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
+ 	ibm4xx_denali_fixup_memsize();
+-	dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
++	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
++	dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
+ }
+ 
+ void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+--- a/arch/powerpc/boot/cuboot-taishan.c
++++ b/arch/powerpc/boot/cuboot-taishan.c
+@@ -40,7 +40,8 @@ static void taishan_fixups(void)
+ 
+ 	ibm4xx_sdram_fixup_memsize();
+ 
+-	dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr);
++	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
++	dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
+ 
+ 	ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
+ }
+--- a/arch/powerpc/boot/cuboot-warp.c
++++ b/arch/powerpc/boot/cuboot-warp.c
+@@ -24,7 +24,7 @@ static void warp_fixups(void)
+ 	ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
+ 	ibm4xx_sdram_fixup_memsize();
+ 	ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
+-	dt_fixup_mac_addresses(&bd.bi_enetaddr);
++	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+ }
+ 
+ 
+--- /dev/null
++++ b/arch/powerpc/boot/cuboot-yosemite.c
+@@ -0,0 +1,44 @@
++/*
++ * Old U-boot compatibility for Yosemite
++ *
++ * Author: Josh Boyer <jwboyer@linux.vnet.ibm.com>
++ *
++ * Copyright 2008 IBM Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include "ops.h"
++#include "stdio.h"
++#include "4xx.h"
++#include "44x.h"
++#include "cuboot.h"
++
++#define TARGET_4xx
++#define TARGET_44x
++#include "ppcboot.h"
++
++static bd_t bd;
++
++static void yosemite_fixups(void)
++{
++	unsigned long sysclk = 66666666;
++
++	ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
++	ibm4xx_sdram_fixup_memsize();
++	ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00);
++	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
++	dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
++}
++
++void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
++		unsigned long r6, unsigned long r7)
++{
++	CUBOOT_INIT();
++	platform_ops.fixups = yosemite_fixups;
++	platform_ops.exit = ibm44x_dbcr_reset;
++	fdt_init(_dtb_start);
++	serial_console_init();
++}
+--- a/arch/powerpc/boot/devtree.c
++++ b/arch/powerpc/boot/devtree.c
+@@ -350,3 +350,23 @@ int dt_is_compatible(void *node, const c
+ 
+ 	return 0;
+ }
++
++int dt_get_virtual_reg(void *node, void **addr, int nres)
++{
++	unsigned long xaddr;
++	int n;
++
++	n = getprop(node, "virtual-reg", addr, nres * 4);
++	if (n > 0)
++		return n / 4;
++
++	for (n = 0; n < nres; n++) {
++		if (!dt_xlate_reg(node, n, &xaddr, NULL))
++			break;
++
++		addr[n] = (void *)xaddr;
++	}
++
++	return n;
++}
++
+--- a/arch/powerpc/boot/dts/bamboo.dts
++++ b/arch/powerpc/boot/dts/bamboo.dts
+@@ -204,7 +204,6 @@
+ 			};
+ 
+ 			EMAC0: ethernet@ef600e00 {
+-				linux,network-index = <0>;
+ 				device_type = "network";
+ 				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+ 				interrupt-parent = <&UIC1>;
+@@ -225,7 +224,6 @@
+ 			};
+ 
+ 			EMAC1: ethernet@ef600f00 {
+-				linux,network-index = <1>;
+ 				device_type = "network";
+ 				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+ 				interrupt-parent = <&UIC1>;
+--- /dev/null
++++ b/arch/powerpc/boot/dts/canyonlands.dts
+@@ -0,0 +1,402 @@
++/*
++ * Device Tree Source for AMCC Canyonlands (460EX)
++ *
++ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2.  This program is licensed "as is" without
++ * any warranty of any kind, whether express or implied.
++ */
++
++/ {
++	#address-cells = <2>;
++	#size-cells = <1>;
++	model = "amcc,canyonlands";
++	compatible = "amcc,canyonlands";
++	dcr-parent = <&/cpus/cpu@0>;
++
++	aliases {
++		ethernet0 = &EMAC0;
++		ethernet1 = &EMAC1;
++		serial0 = &UART0;
++		serial1 = &UART1;
++	};
++
++	cpus {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		cpu@0 {
++			device_type = "cpu";
++			model = "PowerPC,460EX";
++			reg = <0>;
++			clock-frequency = <0>; /* Filled in by U-Boot */
++			timebase-frequency = <0>; /* Filled in by U-Boot */
++			i-cache-line-size = <20>;
++			d-cache-line-size = <20>;
++			i-cache-size = <8000>;
++			d-cache-size = <8000>;
++			dcr-controller;
++			dcr-access-method = "native";
++		};
++	};
++
++	memory {
++		device_type = "memory";
++		reg = <0 0 0>; /* Filled in by U-Boot */
++	};
++
++	UIC0: interrupt-controller0 {
++		compatible = "ibm,uic-460ex","ibm,uic";
++		interrupt-controller;
++		cell-index = <0>;
++		dcr-reg = <0c0 009>;
++		#address-cells = <0>;
++		#size-cells = <0>;
++		#interrupt-cells = <2>;
++	};
++
++	UIC1: interrupt-controller1 {
++		compatible = "ibm,uic-460ex","ibm,uic";
++		interrupt-controller;
++		cell-index = <1>;
++		dcr-reg = <0d0 009>;
++		#address-cells = <0>;
++		#size-cells = <0>;
++		#interrupt-cells = <2>;
++		interrupts = <1e 4 1f 4>; /* cascade */
++		interrupt-parent = <&UIC0>;
++	};
++
++	UIC2: interrupt-controller2 {
++		compatible = "ibm,uic-460ex","ibm,uic";
++		interrupt-controller;
++		cell-index = <2>;
++		dcr-reg = <0e0 009>;
++		#address-cells = <0>;
++		#size-cells = <0>;
++		#interrupt-cells = <2>;
++		interrupts = <a 4 b 4>; /* cascade */
++		interrupt-parent = <&UIC0>;
++	};
++
++	UIC3: interrupt-controller3 {
++		compatible = "ibm,uic-460ex","ibm,uic";
++		interrupt-controller;
++		cell-index = <3>;
++		dcr-reg = <0f0 009>;
++		#address-cells = <0>;
++		#size-cells = <0>;
++		#interrupt-cells = <2>;
++		interrupts = <10 4 11 4>; /* cascade */
++		interrupt-parent = <&UIC0>;
++	};
++
++	SDR0: sdr {
++		compatible = "ibm,sdr-460ex";
++		dcr-reg = <00e 002>;
++	};
++
++	CPR0: cpr {
++		compatible = "ibm,cpr-460ex";
++		dcr-reg = <00c 002>;
++	};
++
++	plb {
++		compatible = "ibm,plb-460ex", "ibm,plb4";
++		#address-cells = <2>;
++		#size-cells = <1>;
++		ranges;
++		clock-frequency = <0>; /* Filled in by U-Boot */
++
++		SDRAM0: sdram {
++			compatible = "ibm,sdram-460ex", "ibm,sdram-405gp";
++			dcr-reg = <010 2>;
++		};
++
++		MAL0: mcmal {
++			compatible = "ibm,mcmal-460ex", "ibm,mcmal2";
++			dcr-reg = <180 62>;
++			num-tx-chans = <2>;
++			num-rx-chans = <10>;
++			#address-cells = <0>;
++			#size-cells = <0>;
++			interrupt-parent = <&UIC2>;
++			interrupts = <	/*TXEOB*/ 6 4
++					/*RXEOB*/ 7 4
++					/*SERR*/  3 4
++					/*TXDE*/  4 4
++					/*RXDE*/  5 4>;
++		};
++
++		POB0: opb {
++			compatible = "ibm,opb-460ex", "ibm,opb";
++			#address-cells = <1>;
++			#size-cells = <1>;
++			ranges = <b0000000 4 b0000000 50000000>;
++			clock-frequency = <0>; /* Filled in by U-Boot */
++
++			EBC0: ebc {
++				compatible = "ibm,ebc-460ex", "ibm,ebc";
++				dcr-reg = <012 2>;
++				#address-cells = <2>;
++				#size-cells = <1>;
++				clock-frequency = <0>; /* Filled in by U-Boot */
++				interrupts = <6 4>;
++				interrupt-parent = <&UIC1>;
++			};
++
++			UART0: serial@ef600300 {
++				device_type = "serial";
++				compatible = "ns16550";
++				reg = <ef600300 8>;
++				virtual-reg = <ef600300>;
++				clock-frequency = <0>; /* Filled in by U-Boot */
++				current-speed = <0>; /* Filled in by U-Boot */
++				interrupt-parent = <&UIC1>;
++				interrupts = <1 4>;
++			};
++
++			UART1: serial@ef600400 {
++				device_type = "serial";
++				compatible = "ns16550";
++				reg = <ef600400 8>;
++				virtual-reg = <ef600400>;
++				clock-frequency = <0>; /* Filled in by U-Boot */
++				current-speed = <0>; /* Filled in by U-Boot */
++				interrupt-parent = <&UIC0>;
++				interrupts = <1 4>;
++			};
++
++			UART2: serial@ef600500 {
++				device_type = "serial";
++				compatible = "ns16550";
++				reg = <ef600500 8>;
++				virtual-reg = <ef600500>;
++				clock-frequency = <0>; /* Filled in by U-Boot */
++				current-speed = <0>; /* Filled in by U-Boot */
++				interrupt-parent = <&UIC1>;
++				interrupts = <1d 4>;
++			};
++
++			UART3: serial@ef600600 {
++				device_type = "serial";
++				compatible = "ns16550";
++				reg = <ef600600 8>;
++				virtual-reg = <ef600600>;
++				clock-frequency = <0>; /* Filled in by U-Boot */
++				current-speed = <0>; /* Filled in by U-Boot */
++				interrupt-parent = <&UIC1>;
++				interrupts = <1e 4>;
++			};
++
++			IIC0: i2c@ef600700 {
++				compatible = "ibm,iic-460ex", "ibm,iic";
++				reg = <ef600700 14>;
++				interrupt-parent = <&UIC0>;
++				interrupts = <2 4>;
++			};
++
++			IIC1: i2c@ef600800 {
++				compatible = "ibm,iic-460ex", "ibm,iic";
++				reg = <ef600800 14>;
++				interrupt-parent = <&UIC0>;
++				interrupts = <3 4>;
++			};
++
++			ZMII0: emac-zmii@ef600d00 {
++				compatible = "ibm,zmii-460ex", "ibm,zmii";
++				reg = <ef600d00 c>;
++			};
++
++			RGMII0: emac-rgmii@ef601500 {
++				compatible = "ibm,rgmii-460ex", "ibm,rgmii";
++				reg = <ef601500 8>;
++				has-mdio;
++			};
++
++			TAH0: emac-tah@ef601350 {
++				compatible = "ibm,tah-460ex", "ibm,tah";
++				reg = <ef601350 30>;
++			};
++
++			TAH1: emac-tah@ef601450 {
++				compatible = "ibm,tah-460ex", "ibm,tah";
++				reg = <ef601450 30>;
++			};
++
++			EMAC0: ethernet@ef600e00 {
++				device_type = "network";
++				compatible = "ibm,emac-460ex", "ibm,emac4";
++				interrupt-parent = <&EMAC0>;
++				interrupts = <0 1>;
++				#interrupt-cells = <1>;
++				#address-cells = <0>;
++				#size-cells = <0>;
++				interrupt-map = </*Status*/ 0 &UIC2 10 4
++						 /*Wake*/   1 &UIC2 14 4>;
++				reg = <ef600e00 70>;
++				local-mac-address = [000000000000]; /* Filled in by U-Boot */
++				mal-device = <&MAL0>;
++				mal-tx-channel = <0>;
++				mal-rx-channel = <0>;
++				cell-index = <0>;
++				max-frame-size = <2328>;
++				rx-fifo-size = <1000>;
++				tx-fifo-size = <800>;
++				phy-mode = "rgmii";
++				phy-map = <00000000>;
++				rgmii-device = <&RGMII0>;
++				rgmii-channel = <0>;
++				tah-device = <&TAH0>;
++				tah-channel = <0>;
++				has-inverted-stacr-oc;
++				has-new-stacr-staopc;
++			};
++
++			EMAC1: ethernet@ef600f00 {
++				device_type = "network";
++				compatible = "ibm,emac-460ex", "ibm,emac4";
++				interrupt-parent = <&EMAC1>;
++				interrupts = <0 1>;
++				#interrupt-cells = <1>;
++				#address-cells = <0>;
++				#size-cells = <0>;
++				interrupt-map = </*Status*/ 0 &UIC2 11 4
++						 /*Wake*/   1 &UIC2 15 4>;
++				reg = <ef600f00 70>;
++				local-mac-address = [000000000000]; /* Filled in by U-Boot */
++				mal-device = <&MAL0>;
++				mal-tx-channel = <1>;
++				mal-rx-channel = <8>;
++				cell-index = <1>;
++				max-frame-size = <2328>;
++				rx-fifo-size = <1000>;
++				tx-fifo-size = <800>;
++				phy-mode = "rgmii";
++				phy-map = <00000000>;
++				rgmii-device = <&RGMII0>;
++				rgmii-channel = <1>;
++				tah-device = <&TAH1>;
++				tah-channel = <1>;
++				has-inverted-stacr-oc;
++				has-new-stacr-staopc;
++				mdio-device = <&EMAC0>;
++			};
++		};
++
++		PCIX0: pci@c0ec00000 {
++			device_type = "pci";
++			#interrupt-cells = <1>;
++			#size-cells = <2>;
++			#address-cells = <3>;
++			compatible = "ibm,plb-pcix-460ex", "ibm,plb-pcix";
++			primary;
++			large-inbound-windows;
++			enable-msi-hole;
++			reg = <c 0ec00000   8	/* Config space access */
++			       0 0 0		/* no IACK cycles */
++			       c 0ed00000   4   /* Special cycles */
++			       c 0ec80000 100	/* Internal registers */
++			       c 0ec80100  fc>;	/* Internal messaging registers */
++
++			/* Outbound ranges, one memory and one IO,
++			 * later cannot be changed
++			 */
++			ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
++				  01000000 0 00000000 0000000c 08000000 0 00010000>;
++
++			/* Inbound 2GB range starting at 0 */
++			dma-ranges = <42000000 0 0 0 0 0 80000000>;
++
++			/* This drives busses 0 to 0x3f */
++			bus-range = <0 3f>;
++
++			/* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
++			interrupt-map-mask = <0000 0 0 0>;
++			interrupt-map = < 0000 0 0 0 &UIC1 0 8 >;
++		};
++
++		PCIE0: pciex@d00000000 {
++			device_type = "pci";
++			#interrupt-cells = <1>;
++			#size-cells = <2>;
++			#address-cells = <3>;
++			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
++			primary;
++			port = <0>; /* port number */
++			reg = <d 00000000 20000000	/* Config space access */
++			       c 08010000 00001000>;	/* Registers */
++			dcr-reg = <100 020>;
++			sdr-base = <300>;
++
++			/* Outbound ranges, one memory and one IO,
++			 * later cannot be changed
++			 */
++			ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
++				  01000000 0 00000000 0000000f 80000000 0 00010000>;
++
++			/* Inbound 2GB range starting at 0 */
++			dma-ranges = <42000000 0 0 0 0 0 80000000>;
++
++			/* This drives busses 40 to 0x7f */
++			bus-range = <40 7f>;
++
++			/* Legacy interrupts (note the weird polarity, the bridge seems
++			 * to invert PCIe legacy interrupts).
++			 * We are de-swizzling here because the numbers are actually for
++			 * port of the root complex virtual P2P bridge. But I want
++			 * to avoid putting a node for it in the tree, so the numbers
++			 * below are basically de-swizzled numbers.
++			 * The real slot is on idsel 0, so the swizzling is 1:1
++			 */
++			interrupt-map-mask = <0000 0 0 7>;
++			interrupt-map = <
++				0000 0 0 1 &UIC3 c 4 /* swizzled int A */
++				0000 0 0 2 &UIC3 d 4 /* swizzled int B */
++				0000 0 0 3 &UIC3 e 4 /* swizzled int C */
++				0000 0 0 4 &UIC3 f 4 /* swizzled int D */>;
++		};
++
++		PCIE1: pciex@d20000000 {
++			device_type = "pci";
++			#interrupt-cells = <1>;
++			#size-cells = <2>;
++			#address-cells = <3>;
++			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
++			primary;
++			port = <1>; /* port number */
++			reg = <d 20000000 20000000	/* Config space access */
++			       c 08011000 00001000>;	/* Registers */
++			dcr-reg = <120 020>;
++			sdr-base = <340>;
++
++			/* Outbound ranges, one memory and one IO,
++			 * later cannot be changed
++			 */
++			ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
++				  01000000 0 00000000 0000000f 80010000 0 00010000>;
++
++			/* Inbound 2GB range starting at 0 */
++			dma-ranges = <42000000 0 0 0 0 0 80000000>;
++
++			/* This drives busses 80 to 0xbf */
++			bus-range = <80 bf>;
++
++			/* Legacy interrupts (note the weird polarity, the bridge seems
++			 * to invert PCIe legacy interrupts).
++			 * We are de-swizzling here because the numbers are actually for
++			 * port of the root complex virtual P2P bridge. But I want
++			 * to avoid putting a node for it in the tree, so the numbers
++			 * below are basically de-swizzled numbers.
++			 * The real slot is on idsel 0, so the swizzling is 1:1
++			 */
++			interrupt-map-mask = <0000 0 0 7>;
++			interrupt-map = <
++				0000 0 0 1 &UIC3 10 4 /* swizzled int A */
++				0000 0 0 2 &UIC3 11 4 /* swizzled int B */
++				0000 0 0 3 &UIC3 12 4 /* swizzled int C */
++				0000 0 0 4 &UIC3 13 4 /* swizzled int D */>;
++		};
++	};
++};
+--- a/arch/powerpc/boot/dts/ebony.dts
++++ b/arch/powerpc/boot/dts/ebony.dts
+@@ -241,7 +241,6 @@
+ 			};
+ 
+ 			EMAC0: ethernet@40000800 {
+-				linux,network-index = <0>;
+ 				device_type = "network";
+ 				compatible = "ibm,emac-440gp", "ibm,emac";
+ 				interrupt-parent = <&UIC1>;
+@@ -261,7 +260,6 @@
+ 				zmii-channel = <0>;
+ 			};
+ 			EMAC1: ethernet@40000900 {
+-				linux,network-index = <1>;
+ 				device_type = "network";
+ 				compatible = "ibm,emac-440gp", "ibm,emac";
+ 				interrupt-parent = <&UIC1>;
+--- a/arch/powerpc/boot/dts/ep8248e.dts
++++ b/arch/powerpc/boot/dts/ep8248e.dts
+@@ -121,8 +121,7 @@
+ 
+ 				data@0 {
+ 					compatible = "fsl,cpm-muram-data";
+-					reg = <0 0x1100 0x1140
+-					       0xec0 0x9800 0x800>;
++					reg = <0 0x2000 0x9800 0x800>;
+ 				};
+ 			};
+ 
+@@ -138,7 +137,7 @@
+ 				device_type = "serial";
+ 				compatible = "fsl,mpc8248-smc-uart",
+ 				             "fsl,cpm2-smc-uart";
+-				reg = <0x11a80 0x20 0x1100 0x40>;
++				reg = <0x11a80 0x20 0x87fc 2>;
+ 				interrupts = <4 8>;
+ 				interrupt-parent = <&PIC>;
+ 				fsl,cpm-brg = <7>;
+--- a/arch/powerpc/boot/dts/ep88xc.dts
++++ b/arch/powerpc/boot/dts/ep88xc.dts
+@@ -2,7 +2,7 @@
+  * EP88xC Device Tree Source
+  *
+  * Copyright 2006 MontaVista Software, Inc.
+- * Copyright 2007 Freescale Semiconductor, Inc.
++ * Copyright 2007,2008 Freescale Semiconductor, Inc.
+  *
+  * This program is free software; you can redistribute  it and/or modify it
+  * under  the terms of  the GNU General  Public License as published by the
+@@ -10,6 +10,7 @@
+  * option) any later version.
+  */
+ 
++/dts-v1/;
+ 
+ / {
+ 	model = "EP88xC";
+@@ -23,44 +24,44 @@
+ 
+ 		PowerPC,885@0 {
+ 			device_type = "cpu";
+-			reg = <0>;
+-			d-cache-line-size = <d#16>;
+-			i-cache-line-size = <d#16>;
+-			d-cache-size = <d#8192>;
+-			i-cache-size = <d#8192>;
++			reg = <0x0>;
++			d-cache-line-size = <16>;
++			i-cache-line-size = <16>;
++			d-cache-size = <8192>;
++			i-cache-size = <8192>;
+ 			timebase-frequency = <0>;
+ 			bus-frequency = <0>;
+ 			clock-frequency = <0>;
+-			interrupts = <f 2>;	// decrementer interrupt
++			interrupts = <15 2>;	// decrementer interrupt
+ 			interrupt-parent = <&PIC>;
+ 		};
+ 	};
+ 
+ 	memory {
+ 		device_type = "memory";
+-		reg = <0 0>;
++		reg = <0x0 0x0>;
+ 	};
+ 
+ 	localbus@fa200100 {
+ 		compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus";
+ 		#address-cells = <2>;
+ 		#size-cells = <1>;
+-		reg = <fa200100 40>;
++		reg = <0xfa200100 0x40>;
+ 
+ 		ranges = <
+-			0 0 fc000000 04000000
+-			3 0 fa000000 01000000
++			0x0 0x0 0xfc000000 0x4000000
++			0x3 0x0 0xfa000000 0x1000000
+ 		>;
+ 
+ 		flash@0,2000000 {
+ 			compatible = "cfi-flash";
+-			reg = <0 2000000 2000000>;
++			reg = <0x0 0x2000000 0x2000000>;
+ 			bank-width = <4>;
+ 			device-width = <2>;
+ 		};
+ 
+ 		board-control@3,400000 {
+-			reg = <3 400000 10>;
++			reg = <0x3 0x400000 0x10>;
+ 			compatible = "fsl,ep88xc-bcsr";
+ 		};
+ 	};
+@@ -70,25 +71,25 @@
+ 		#address-cells = <1>;
+ 		#size-cells = <1>;
+ 		device_type = "soc";
+-		ranges = <0 fa200000 00004000>;
++		ranges = <0x0 0xfa200000 0x4000>;
+ 		bus-frequency = <0>;
+ 
+ 		// Temporary -- will go away once kernel uses ranges for get_immrbase().
+-		reg = <fa200000 4000>;
++		reg = <0xfa200000 0x4000>;
+ 
+ 		mdio@e00 {
+ 			compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio";
+-			reg = <e00 188>;
++			reg = <0xe00 0x188>;
+ 			#address-cells = <1>;
+ 			#size-cells = <0>;
+ 
+ 			PHY0: ethernet-phy@0 {
+-				reg = <0>;
++				reg = <0x0>;
+ 				device_type = "ethernet-phy";
+ 			};
+ 
+ 			PHY1: ethernet-phy@1 {
+-				reg = <1>;
++				reg = <0x1>;
+ 				device_type = "ethernet-phy";
+ 			};
+ 		};
+@@ -97,7 +98,7 @@
+ 			device_type = "network";
+ 			compatible = "fsl,mpc885-fec-enet",
+ 			             "fsl,pq1-fec-enet";
+-			reg = <e00 188>;
++			reg = <0xe00 0x188>;
+ 			local-mac-address = [ 00 00 00 00 00 00 ];
+ 			interrupts = <3 1>;
+ 			interrupt-parent = <&PIC>;
+@@ -109,7 +110,7 @@
+ 			device_type = "network";
+ 			compatible = "fsl,mpc885-fec-enet",
+ 			             "fsl,pq1-fec-enet";
+-			reg = <1e00 188>;
++			reg = <0x1e00 0x188>;
+ 			local-mac-address = [ 00 00 00 00 00 00 ];
+ 			interrupts = <7 1>;
+ 			interrupt-parent = <&PIC>;
+@@ -120,7 +121,7 @@
+ 		PIC: interrupt-controller@0 {
+ 			interrupt-controller;
+ 			#interrupt-cells = <2>;
+-			reg = <0 24>;
++			reg = <0x0 0x24>;
+ 			compatible = "fsl,mpc885-pic", "fsl,pq1-pic";
+ 		};
+ 
+@@ -130,29 +131,29 @@
+ 			#size-cells = <2>;
+ 			compatible = "fsl,pq-pcmcia";
+ 			device_type = "pcmcia";
+-			reg = <80 80>;
++			reg = <0x80 0x80>;
+ 			interrupt-parent = <&PIC>;
+-			interrupts = <d 1>;
++			interrupts = <13 1>;
+ 		};
+ 
+ 		cpm@9c0 {
+ 			#address-cells = <1>;
+ 			#size-cells = <1>;
+ 			compatible = "fsl,mpc885-cpm", "fsl,cpm1";
+-			command-proc = <9c0>;
++			command-proc = <0x9c0>;
+ 			interrupts = <0>;	// cpm error interrupt
+ 			interrupt-parent = <&CPM_PIC>;
+-			reg = <9c0 40>;
++			reg = <0x9c0 0x40>;
+ 			ranges;
+ 
+ 			muram@2000 {
+ 				#address-cells = <1>;
+ 				#size-cells = <1>;
+-				ranges = <0 2000 2000>;
++				ranges = <0x0 0x2000 0x2000>;
+ 
+ 				data@0 {
+ 					compatible = "fsl,cpm-muram-data";
+-					reg = <0 1c00>;
++					reg = <0x0 0x1c00>;
+ 				};
+ 			};
+ 
+@@ -160,7 +161,7 @@
+ 				compatible = "fsl,mpc885-brg",
+ 				             "fsl,cpm1-brg",
+ 				             "fsl,cpm-brg";
+-				reg = <9f0 10>;
++				reg = <0x9f0 0x10>;
+ 			};
+ 
+ 			CPM_PIC: interrupt-controller@930 {
+@@ -168,7 +169,7 @@
+ 				#interrupt-cells = <1>;
+ 				interrupts = <5 2 0 2>;
+ 				interrupt-parent = <&PIC>;
+-				reg = <930 20>;
++				reg = <0x930 0x20>;
+ 				compatible = "fsl,mpc885-cpm-pic",
+ 				             "fsl,cpm1-pic";
+ 			};
+@@ -178,11 +179,11 @@
+ 				device_type = "serial";
+ 				compatible = "fsl,mpc885-smc-uart",
+ 				             "fsl,cpm1-smc-uart";
+-				reg = <a80 10 3e80 40>;
++				reg = <0xa80 0x10 0x3e80 0x40>;
+ 				interrupts = <4>;
+ 				interrupt-parent = <&CPM_PIC>;
+ 				fsl,cpm-brg = <1>;
+-				fsl,cpm-command = <0090>;
++				fsl,cpm-command = <0x90>;
+ 				linux,planetcore-label = "SMC1";
+ 			};
+ 
+@@ -191,11 +192,11 @@
+ 				device_type = "serial";
+ 				compatible = "fsl,mpc885-scc-uart",
+ 				             "fsl,cpm1-scc-uart";
+-				reg = <a20 20 3d00 80>;
+-				interrupts = <1d>;
++				reg = <0xa20 0x20 0x3d00 0x80>;
++				interrupts = <29>;
+ 				interrupt-parent = <&CPM_PIC>;
+ 				fsl,cpm-brg = <2>;
+-				fsl,cpm-command = <0040>;
++				fsl,cpm-command = <0x40>;
+ 				linux,planetcore-label = "SCC2";
+ 			};
+ 
+@@ -204,9 +205,9 @@
+ 				#size-cells = <0>;
+ 				compatible = "fsl,mpc885-usb",
+ 				             "fsl,cpm1-usb";
+-				reg = <a00 18 1c00 80>;
++				reg = <0xa00 0x18 0x1c00 0x80>;
+ 				interrupt-parent = <&CPM_PIC>;
+-				interrupts = <1e>;
++				interrupts = <30>;
+ 				fsl,cpm-command = <0000>;
+ 			};
+ 		};
+--- /dev/null
++++ b/arch/powerpc/boot/dts/glacier.dts
+@@ -0,0 +1,467 @@
++/*
++ * Device Tree Source for AMCC Glacier (460GT)
++ *
++ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2.  This program is licensed "as is" without
++ * any warranty of any kind, whether express or implied.
++ */
++
++/ {
++	#address-cells = <2>;
++	#size-cells = <1>;
++	model = "amcc,glacier";
++	compatible = "amcc,glacier", "amcc,canyonlands";
++	dcr-parent = <&/cpus/cpu@0>;
++
++	aliases {
++		ethernet0 = &EMAC0;
++		ethernet1 = &EMAC1;
++		ethernet2 = &EMAC2;
++		ethernet3 = &EMAC3;
++		serial0 = &UART0;
++		serial1 = &UART1;
++	};
++
++	cpus {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		cpu@0 {
++			device_type = "cpu";
++			model = "PowerPC,460GT";
++			reg = <0>;
++			clock-frequency = <0>; /* Filled in by U-Boot */
++			timebase-frequency = <0>; /* Filled in by U-Boot */
++			i-cache-line-size = <20>;
++			d-cache-line-size = <20>;
++			i-cache-size = <8000>;
++			d-cache-size = <8000>;
++			dcr-controller;
++			dcr-access-method = "native";
++		};
++	};
++
++	memory {
++		device_type = "memory";
++		reg = <0 0 0>; /* Filled in by U-Boot */
++	};
++
++	UIC0: interrupt-controller0 {
++		compatible = "ibm,uic-460gt","ibm,uic";
++		interrupt-controller;
++		cell-index = <0>;
++		dcr-reg = <0c0 009>;
++		#address-cells = <0>;
++		#size-cells = <0>;
++		#interrupt-cells = <2>;
++	};
++
++	UIC1: interrupt-controller1 {
++		compatible = "ibm,uic-460gt","ibm,uic";
++		interrupt-controller;
++		cell-index = <1>;
++		dcr-reg = <0d0 009>;
++		#address-cells = <0>;
++		#size-cells = <0>;
++		#interrupt-cells = <2>;
++		interrupts = <1e 4 1f 4>; /* cascade */
++		interrupt-parent = <&UIC0>;
++	};
++
++	UIC2: interrupt-controller2 {
++		compatible = "ibm,uic-460gt","ibm,uic";
++		interrupt-controller;
++		cell-index = <2>;
++		dcr-reg = <0e0 009>;
++		#address-cells = <0>;
++		#size-cells = <0>;
++		#interrupt-cells = <2>;
++		interrupts = <a 4 b 4>; /* cascade */
++		interrupt-parent = <&UIC0>;
++	};
++
++	UIC3: interrupt-controller3 {
++		compatible = "ibm,uic-460gt","ibm,uic";
++		interrupt-controller;
++		cell-index = <3>;
++		dcr-reg = <0f0 009>;
++		#address-cells = <0>;
++		#size-cells = <0>;
++		#interrupt-cells = <2>;
++		interrupts = <10 4 11 4>; /* cascade */
++		interrupt-parent = <&UIC0>;
++	};
++
++	SDR0: sdr {
++		compatible = "ibm,sdr-460gt";
++		dcr-reg = <00e 002>;
++	};
++
++	CPR0: cpr {
++		compatible = "ibm,cpr-460gt";
++		dcr-reg = <00c 002>;
++	};
++
++	plb {
++		compatible = "ibm,plb-460gt", "ibm,plb4";
++		#address-cells = <2>;
++		#size-cells = <1>;
++		ranges;
++		clock-frequency = <0>; /* Filled in by U-Boot */
++
++		SDRAM0: sdram {
++			compatible = "ibm,sdram-460gt", "ibm,sdram-405gp";
++			dcr-reg = <010 2>;
++		};
++
++		MAL0: mcmal {
++			compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
++			dcr-reg = <180 62>;
++			num-tx-chans = <4>;
++			num-rx-chans = <20>;
++			#address-cells = <0>;
++			#size-cells = <0>;
++			interrupt-parent = <&UIC2>;
++			interrupts = <	/*TXEOB*/ 6 4
++					/*RXEOB*/ 7 4
++					/*SERR*/  3 4
++					/*TXDE*/  4 4
++					/*RXDE*/  5 4>;
++			desc-base-addr-high = <8>;
++		};
++
++		POB0: opb {
++			compatible = "ibm,opb-460gt", "ibm,opb";
++			#address-cells = <1>;
++			#size-cells = <1>;
++			ranges = <b0000000 4 b0000000 50000000>;
++			clock-frequency = <0>; /* Filled in by U-Boot */
++
++			EBC0: ebc {
++				compatible = "ibm,ebc-460gt", "ibm,ebc";
++				dcr-reg = <012 2>;
++				#address-cells = <2>;
++				#size-cells = <1>;
++				clock-frequency = <0>; /* Filled in by U-Boot */
++				interrupts = <6 4>;
++				interrupt-parent = <&UIC1>;
++			};
++
++			UART0: serial@ef600300 {
++				device_type = "serial";
++				compatible = "ns16550";
++				reg = <ef600300 8>;
++				virtual-reg = <ef600300>;
++				clock-frequency = <0>; /* Filled in by U-Boot */
++				current-speed = <0>; /* Filled in by U-Boot */
++				interrupt-parent = <&UIC1>;
++				interrupts = <1 4>;
++			};
++
++			UART1: serial@ef600400 {
++				device_type = "serial";
++				compatible = "ns16550";
++				reg = <ef600400 8>;
++				virtual-reg = <ef600400>;
++				clock-frequency = <0>; /* Filled in by U-Boot */
++				current-speed = <0>; /* Filled in by U-Boot */
++				interrupt-parent = <&UIC0>;
++				interrupts = <1 4>;
++			};
++
++			UART2: serial@ef600500 {
++				device_type = "serial";
++				compatible = "ns16550";
++				reg = <ef600500 8>;
++				virtual-reg = <ef600500>;
++				clock-frequency = <0>; /* Filled in by U-Boot */
++				current-speed = <0>; /* Filled in by U-Boot */
++				interrupt-parent = <&UIC1>;
++				interrupts = <1d 4>;
++			};
++
++			UART3: serial@ef600600 {
++				device_type = "serial";
++				compatible = "ns16550";
++				reg = <ef600600 8>;
++				virtual-reg = <ef600600>;
++				clock-frequency = <0>; /* Filled in by U-Boot */
++				current-speed = <0>; /* Filled in by U-Boot */
++				interrupt-parent = <&UIC1>;
++				interrupts = <1e 4>;
++			};
++
++			IIC0: i2c@ef600700 {
++				compatible = "ibm,iic-460gt", "ibm,iic";
++				reg = <ef600700 14>;
++				interrupt-parent = <&UIC0>;
++				interrupts = <2 4>;
++			};
++
++			IIC1: i2c@ef600800 {
++				compatible = "ibm,iic-460gt", "ibm,iic";
++				reg = <ef600800 14>;
++				interrupt-parent = <&UIC0>;
++				interrupts = <3 4>;
++			};
++
++			ZMII0: emac-zmii@ef600d00 {
++				compatible = "ibm,zmii-460gt", "ibm,zmii";
++				reg = <ef600d00 c>;
++			};
++
++			RGMII0: emac-rgmii@ef601500 {
++				compatible = "ibm,rgmii-460gt", "ibm,rgmii";
++				reg = <ef601500 8>;
++				has-mdio;
++			};
++
++			RGMII1: emac-rgmii@ef601600 {
++				compatible = "ibm,rgmii-460gt", "ibm,rgmii";
++				reg = <ef601600 8>;
++				has-mdio;
++			};
++
++			TAH0: emac-tah@ef601350 {
++				compatible = "ibm,tah-460gt", "ibm,tah";
++				reg = <ef601350 30>;
++			};
++
++			TAH1: emac-tah@ef601450 {
++				compatible = "ibm,tah-460gt", "ibm,tah";
++				reg = <ef601450 30>;
++			};
++
++			EMAC0: ethernet@ef600e00 {
++				device_type = "network";
++				compatible = "ibm,emac-460gt", "ibm,emac4";
++				interrupt-parent = <&EMAC0>;
++				interrupts = <0 1>;
++				#interrupt-cells = <1>;
++				#address-cells = <0>;
++				#size-cells = <0>;
++				interrupt-map = </*Status*/ 0 &UIC2 10 4
++						 /*Wake*/   1 &UIC2 14 4>;
++				reg = <ef600e00 70>;
++				local-mac-address = [000000000000]; /* Filled in by U-Boot */
++				mal-device = <&MAL0>;
++				mal-tx-channel = <0>;
++				mal-rx-channel = <0>;
++				cell-index = <0>;
++				max-frame-size = <2328>;
++				rx-fifo-size = <1000>;
++				tx-fifo-size = <800>;
++				phy-mode = "rgmii";
++				phy-map = <00000000>;
++				rgmii-device = <&RGMII0>;
++				rgmii-channel = <0>;
++				tah-device = <&TAH0>;
++				tah-channel = <0>;
++				has-inverted-stacr-oc;
++				has-new-stacr-staopc;
++			};
++
++			EMAC1: ethernet@ef600f00 {
++				device_type = "network";
++				compatible = "ibm,emac-460gt", "ibm,emac4";
++				interrupt-parent = <&EMAC1>;
++				interrupts = <0 1>;
++				#interrupt-cells = <1>;
++				#address-cells = <0>;
++				#size-cells = <0>;
++				interrupt-map = </*Status*/ 0 &UIC2 11 4
++						 /*Wake*/   1 &UIC2 15 4>;
++				reg = <ef600f00 70>;
++				local-mac-address = [000000000000]; /* Filled in by U-Boot */
++				mal-device = <&MAL0>;
++				mal-tx-channel = <1>;
++				mal-rx-channel = <8>;
++				cell-index = <1>;
++				max-frame-size = <2328>;
++				rx-fifo-size = <1000>;
++				tx-fifo-size = <800>;
++				phy-mode = "rgmii";
++				phy-map = <00000000>;
++				rgmii-device = <&RGMII0>;
++				rgmii-channel = <1>;
++				tah-device = <&TAH1>;
++				tah-channel = <1>;
++				has-inverted-stacr-oc;
++				has-new-stacr-staopc;
++				mdio-device = <&EMAC0>;
++			};
++
++			EMAC2: ethernet@ef601100 {
++				device_type = "network";
++				compatible = "ibm,emac-460gt", "ibm,emac4";
++				interrupt-parent = <&EMAC2>;
++				interrupts = <0 1>;
++				#interrupt-cells = <1>;
++				#address-cells = <0>;
++				#size-cells = <0>;
++				interrupt-map = </*Status*/ 0 &UIC2 12 4
++						 /*Wake*/   1 &UIC2 16 4>;
++				reg = <ef601100 70>;
++				local-mac-address = [000000000000]; /* Filled in by U-Boot */
++				mal-device = <&MAL0>;
++				mal-tx-channel = <2>;
++				mal-rx-channel = <10>;
++				cell-index = <2>;
++				max-frame-size = <2328>;
++				rx-fifo-size = <1000>;
++				tx-fifo-size = <800>;
++				phy-mode = "rgmii";
++				phy-map = <00000000>;
++				rgmii-device = <&RGMII1>;
++				rgmii-channel = <0>;
++				has-inverted-stacr-oc;
++				has-new-stacr-staopc;
++				mdio-device = <&EMAC0>;
++			};
++
++			EMAC3: ethernet@ef601200 {
++				device_type = "network";
++				compatible = "ibm,emac-460gt", "ibm,emac4";
++				interrupt-parent = <&EMAC3>;
++				interrupts = <0 1>;
++				#interrupt-cells = <1>;
++				#address-cells = <0>;
++				#size-cells = <0>;
++				interrupt-map = </*Status*/ 0 &UIC2 13 4
++						 /*Wake*/   1 &UIC2 17 4>;
++				reg = <ef601200 70>;
++				local-mac-address = [000000000000]; /* Filled in by U-Boot */
++				mal-device = <&MAL0>;
++				mal-tx-channel = <3>;
++				mal-rx-channel = <18>;
++				cell-index = <3>;
++				max-frame-size = <2328>;
++				rx-fifo-size = <1000>;
++				tx-fifo-size = <800>;
++				phy-mode = "rgmii";
++				phy-map = <00000000>;
++				rgmii-device = <&RGMII1>;
++				rgmii-channel = <1>;
++				has-inverted-stacr-oc;
++				has-new-stacr-staopc;
++				mdio-device = <&EMAC0>;
++			};
++		};
++
++		PCIX0: pci@c0ec00000 {
++			device_type = "pci";
++			#interrupt-cells = <1>;
++			#size-cells = <2>;
++			#address-cells = <3>;
++			compatible = "ibm,plb-pcix-460gt", "ibm,plb-pcix";
++			primary;
++			large-inbound-windows;
++			enable-msi-hole;
++			reg = <c 0ec00000   8	/* Config space access */
++			       0 0 0		/* no IACK cycles */
++			       c 0ed00000   4   /* Special cycles */
++			       c 0ec80000 100	/* Internal registers */
++			       c 0ec80100  fc>;	/* Internal messaging registers */
++
++			/* Outbound ranges, one memory and one IO,
++			 * later cannot be changed
++			 */
++			ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
++				  01000000 0 00000000 0000000c 08000000 0 00010000>;
++
++			/* Inbound 2GB range starting at 0 */
++			dma-ranges = <42000000 0 0 0 0 0 80000000>;
++
++			/* This drives busses 0 to 0x3f */
++			bus-range = <0 3f>;
++
++			/* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
++			interrupt-map-mask = <0000 0 0 0>;
++			interrupt-map = < 0000 0 0 0 &UIC1 0 8 >;
++		};
++
++		PCIE0: pciex@d00000000 {
++			device_type = "pci";
++			#interrupt-cells = <1>;
++			#size-cells = <2>;
++			#address-cells = <3>;
++			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
++			primary;
++			port = <0>; /* port number */
++			reg = <d 00000000 20000000	/* Config space access */
++			       c 08010000 00001000>;	/* Registers */
++			dcr-reg = <100 020>;
++			sdr-base = <300>;
++
++			/* Outbound ranges, one memory and one IO,
++			 * later cannot be changed
++			 */
++			ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
++				  01000000 0 00000000 0000000f 80000000 0 00010000>;
++
++			/* Inbound 2GB range starting at 0 */
++			dma-ranges = <42000000 0 0 0 0 0 80000000>;
++
++			/* This drives busses 40 to 0x7f */
++			bus-range = <40 7f>;
++
++			/* Legacy interrupts (note the weird polarity, the bridge seems
++			 * to invert PCIe legacy interrupts).
++			 * We are de-swizzling here because the numbers are actually for
++			 * port of the root complex virtual P2P bridge. But I want
++			 * to avoid putting a node for it in the tree, so the numbers
++			 * below are basically de-swizzled numbers.
++			 * The real slot is on idsel 0, so the swizzling is 1:1
++			 */
++			interrupt-map-mask = <0000 0 0 7>;
++			interrupt-map = <
++				0000 0 0 1 &UIC3 c 4 /* swizzled int A */
++				0000 0 0 2 &UIC3 d 4 /* swizzled int B */
++				0000 0 0 3 &UIC3 e 4 /* swizzled int C */
++				0000 0 0 4 &UIC3 f 4 /* swizzled int D */>;
++		};
++
++		PCIE1: pciex@d20000000 {
++			device_type = "pci";
++			#interrupt-cells = <1>;
++			#size-cells = <2>;
++			#address-cells = <3>;
++			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
++			primary;
++			port = <1>; /* port number */
++			reg = <d 20000000 20000000	/* Config space access */
++			       c 08011000 00001000>;	/* Registers */
++			dcr-reg = <120 020>;
++			sdr-base = <340>;
++
++			/* Outbound ranges, one memory and one IO,
++			 * later cannot be changed
++			 */
++			ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
++				  01000000 0 00000000 0000000f 80010000 0 00010000>;
++
++			/* Inbound 2GB range starting at 0 */
++			dma-ranges = <42000000 0 0 0 0 0 80000000>;
++
++			/* This drives busses 80 to 0xbf */
++			bus-range = <80 bf>;
++
++			/* Legacy interrupts (note the weird polarity, the bridge seems
++			 * to invert PCIe legacy interrupts).
++			 * We are de-swizzling here because the numbers are actually for
++			 * port of the root complex virtual P2P bridge. But I want
++			 * to avoid putting a node for it in the tree, so the numbers
++			 * below are basically de-swizzled numbers.
++			 * The real slot is on idsel 0, so the swizzling is 1:1
++			 */
++			interrupt-map-mask = <0000 0 0 7>;
++			interrupt-map = <
++				0000 0 0 1 &UIC3 10 4 /* swizzled int A */
++				0000 0 0 2 &UIC3 11 4 /* swizzled int B */
++				0000 0 0 3 &UIC3 12 4 /* swizzled int C */
++				0000 0 0 4 &UIC3 13 4 /* swizzled int D */>;
++		};
++	};
++};
+--- a/arch/powerpc/boot/dts/haleakala.dts
++++ b/arch/powerpc/boot/dts/haleakala.dts
+@@ -12,7 +12,7 @@
+ 	#address-cells = <1>;
+ 	#size-cells = <1>;
+ 	model = "amcc,haleakala";
+-	compatible = "amcc,kilauea";
++	compatible = "amcc,haleakala", "amcc,kilauea";
+ 	dcr-parent = <&/cpus/cpu@0>;
+ 
+ 	aliases {
+@@ -218,7 +218,7 @@
+ 				mal-tx-channel = <0>;
+ 				mal-rx-channel = <0>;
+ 				cell-index = <0>;
+-				max-frame-size = <5dc>;
++				max-frame-size = <2328>;
+ 				rx-fifo-size = <1000>;
+ 				tx-fifo-size = <800>;
+ 				phy-mode = "rgmii";
+--- a/arch/powerpc/boot/dts/katmai.dts
++++ b/arch/powerpc/boot/dts/katmai.dts
+@@ -212,7 +212,7 @@
+ 				mal-tx-channel = <0>;
+ 				mal-rx-channel = <0>;
+ 				cell-index = <0>;
+-				max-frame-size = <5dc>;
++				max-frame-size = <2328>;
+ 				rx-fifo-size = <1000>;
+ 				tx-fifo-size = <800>;
+ 				phy-mode = "gmii";
+--- a/arch/powerpc/boot/dts/kilauea.dts
++++ b/arch/powerpc/boot/dts/kilauea.dts
+@@ -219,7 +219,7 @@
+ 				mal-tx-channel = <0>;
+ 				mal-rx-channel = <0>;
+ 				cell-index = <0>;
+-				max-frame-size = <5dc>;
++				max-frame-size = <2328>;
+ 				rx-fifo-size = <1000>;
+ 				tx-fifo-size = <800>;
+ 				phy-mode = "rgmii";
+@@ -247,7 +247,7 @@
+ 				mal-tx-channel = <1>;
+ 				mal-rx-channel = <1>;
+ 				cell-index = <1>;
+-				max-frame-size = <5dc>;
++				max-frame-size = <2328>;
+ 				rx-fifo-size = <1000>;
+ 				tx-fifo-size = <800>;
+ 				phy-mode = "rgmii";
+--- /dev/null
++++ b/arch/powerpc/boot/dts/ksi8560.dts
+@@ -0,0 +1,267 @@
++/*
++ * Device Tree Source for Emerson KSI8560
++ *
++ * Author: Alexandr Smirnov <asmirnov@ru.mvista.com>
++ *
++ * Based on mpc8560ads.dts
++ *
++ * 2008 (c) MontaVista, Software, Inc.  This file is licensed under
++ * the terms of the GNU General Public License version 2.  This program
++ * is licensed "as is" without any warranty of any kind, whether express
++ * or implied.
++ *
++ */
++
++/dts-v1/;
++
++/ {
++	model = "KSI8560";
++	compatible = "emerson,KSI8560";
++	#address-cells = <1>;
++	#size-cells = <1>;
++
++	aliases {
++		ethernet0 = &enet0;
++		ethernet1 = &enet1;
++		ethernet2 = &enet2;
++	};
++
++	cpus {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		PowerPC,8560@0 {
++			device_type = "cpu";
++			reg = <0>;
++			d-cache-line-size = <32>;
++			i-cache-line-size = <32>;
++			d-cache-size = <0x8000>;		/* L1, 32K */
++			i-cache-size = <0x8000>;		/* L1, 32K */
++			timebase-frequency = <0>;		/* From U-boot */
++			bus-frequency = <0>;			/* From U-boot */
++			clock-frequency = <0>;			/* From U-boot */
++		};
++	};
++
++	memory {
++		device_type = "memory";
++		reg = <0x00000000 0x10000000>;			/* Fixed by bootwrapper */
++	};
++
++	soc@fdf00000 {
++		#address-cells = <1>;
++		#size-cells = <1>;
++		device_type = "soc";
++		ranges = <0x00000000 0xfdf00000 0x00100000>;
++		bus-frequency = <0>;				/* Fixed by bootwrapper */
++
++		memory-controller@2000 {
++			compatible = "fsl,8540-memory-controller";
++			reg = <0x2000 0x1000>;
++			interrupt-parent = <&MPIC>;
++			interrupts = <0x12 0x2>;
++		};
++
++		l2-cache-controller@20000 {
++			compatible = "fsl,8540-l2-cache-controller";
++			reg = <0x20000 0x1000>;
++			cache-line-size = <0x20>;		/* 32 bytes */
++			cache-size = <0x40000>;			/* L2, 256K */
++			interrupt-parent = <&MPIC>;
++			interrupts = <0x10 0x2>;
++		};
++
++		i2c@3000 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			cell-index = <0>;
++			compatible = "fsl-i2c";
++			reg = <0x3000 0x100>;
++			interrupts = <0x2b 0x2>;
++			interrupt-parent = <&MPIC>;
++			dfsrr;
++		};
++
++		mdio@24520 {					/* For TSECs */
++			#address-cells = <1>;
++			#size-cells = <0>;
++			compatible = "fsl,gianfar-mdio";
++			reg = <0x24520 0x20>;
++
++			PHY1: ethernet-phy@1 {
++				interrupt-parent = <&MPIC>;
++				reg = <0x1>;
++				device_type = "ethernet-phy";
++			};
++
++			PHY2: ethernet-phy@2 {
++				interrupt-parent = <&MPIC>;
++				reg = <0x2>;
++				device_type = "ethernet-phy";
++			};
++		};
++
++		enet0: ethernet@24000 {
++			device_type = "network";
++			model = "TSEC";
++			compatible = "gianfar";
++			reg = <0x24000 0x1000>;
++			/* Mac address filled in by bootwrapper */
++			local-mac-address = [ 00 00 00 00 00 00 ];
++			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
++			interrupt-parent = <&MPIC>;
++			phy-handle = <&PHY1>;
++		};
++
++		enet1: ethernet@25000 {
++			device_type = "network";
++			model = "TSEC";
++			compatible = "gianfar";
++			reg = <0x25000 0x1000>;
++			/* Mac address filled in by bootwrapper */
++			local-mac-address = [ 00 00 00 00 00 00 ];
++			interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
++			interrupt-parent = <&MPIC>;
++			phy-handle = <&PHY2>;
++		};
++
++		MPIC: pic@40000 {
++			#address-cells = <0>;
++			#interrupt-cells = <2>;
++			interrupt-controller;
++			reg = <0x40000 0x40000>;
++			device_type = "open-pic";
++		};
++
++		cpm@919c0 {
++			#address-cells = <1>;
++			#size-cells = <1>;
++			compatible = "fsl,mpc8560-cpm", "fsl,cpm2";
++			reg = <0x919c0 0x30>;
++			ranges;
++
++			muram@80000 {
++				#address-cells = <1>;
++				#size-cells = <1>;
++				ranges = <0x0 0x80000 0x10000>;
++
++				data@0 {
++					compatible = "fsl,cpm-muram-data";
++					reg = <0x0 0x4000 0x9000 0x2000>;
++				};
++			};
++
++			brg@919f0 {
++				compatible = "fsl,mpc8560-brg",
++					     "fsl,cpm2-brg",
++					     "fsl,cpm-brg";
++				reg = <0x919f0 0x10 0x915f0 0x10>;
++				clock-frequency = <165000000>;	/* 166MHz */
++			};
++
++			CPMPIC: pic@90c00 {
++				#address-cells = <0>;
++				#interrupt-cells = <2>;
++				interrupt-controller;
++				interrupts = <0x2e 0x2>;
++				interrupt-parent = <&MPIC>;
++				reg = <0x90c00 0x80>;
++				compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
++			};
++
++			serial@91a00 {
++				device_type = "serial";
++				compatible = "fsl,mpc8560-scc-uart",
++					     "fsl,cpm2-scc-uart";
++				reg = <0x91a00 0x20 0x88000 0x100>;
++				fsl,cpm-brg = <1>;
++				fsl,cpm-command = <0x800000>;
++				current-speed = <0x1c200>;
++				interrupts = <0x28 0x8>;
++				interrupt-parent = <&CPMPIC>;
++			};
++
++			serial@91a20 {
++				device_type = "serial";
++				compatible = "fsl,mpc8560-scc-uart",
++					     "fsl,cpm2-scc-uart";
++				reg = <0x91a20 0x20 0x88100 0x100>;
++				fsl,cpm-brg = <2>;
++				fsl,cpm-command = <0x4a00000>;
++				current-speed = <0x1c200>;
++				interrupts = <0x29 0x8>;
++				interrupt-parent = <&CPMPIC>;
++			};
++
++			mdio@90d00 {				/* For FCCs */
++				#address-cells = <1>;
++				#size-cells = <0>;
++				compatible = "fsl,cpm2-mdio-bitbang";
++				reg = <0x90d00 0x14>;
++				fsl,mdio-pin = <24>;
++				fsl,mdc-pin = <25>;
++
++				PHY0: ethernet-phy@0 {
++					interrupt-parent = <&MPIC>;
++					reg = <0x0>;
++					device_type = "ethernet-phy";
++				};
++			};
++
++			enet2: ethernet@91300 {
++				device_type = "network";
++				compatible = "fsl,mpc8560-fcc-enet",
++					     "fsl,cpm2-fcc-enet";
++				reg = <0x91300 0x20 0x88400 0x100 0x91390 0x1>;
++				/* Mac address filled in by bootwrapper */
++				local-mac-address = [ 00 00 00 00 00 00 ];
++				fsl,cpm-command = <0x12000300>;
++				interrupts = <0x20 0x8>;
++				interrupt-parent = <&CPMPIC>;
++				phy-handle = <&PHY0>;
++			};
++		};
++	};
++
++	localbus@fdf05000 {
++		#address-cells = <2>;
++		#size-cells = <1>;
++		compatible = "fsl,mpc8560-localbus";
++		reg = <0xfdf05000 0x68>;
++
++		ranges = <0x0 0x0 0xe0000000 0x00800000
++			  0x4 0x0 0xe8080000 0x00080000>;
++
++		flash@0,0 {
++			#address-cells = <1>;
++			#size-cells = <1>;
++			compatible = "jedec-flash";
++			reg = <0x0 0x0 0x800000>;
++			bank-width = <0x2>;
++
++			partition@0 {
++				label = "Primary Kernel";
++				reg = <0x0 0x180000>;
++			};
++			partition@180000 {
++				label = "Primary Filesystem";
++				reg = <0x180000 0x580000>;
++			};
++			partition@700000 {
++				label = "Monitor";
++				reg = <0x300000 0x100000>;
++				read-only;
++			};
++		};
++
++		cpld@4,0 {
++			compatible = "emerson,KSI8560-cpld";
++			reg = <0x4 0x0 0x80000>;
++		};
++	};
++
++
++	chosen {
++		linux,stdout-path = "/soc/cpm/serial@91a00";
++	};
++};
+--- a/arch/powerpc/boot/dts/kuroboxHD.dts
++++ b/arch/powerpc/boot/dts/kuroboxHD.dts
+@@ -7,6 +7,7 @@
+  * Based on sandpoint.dts
+  *
+  * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de>
++ * Copyright 2008 Freescale Semiconductor, Inc.
+  *
+  * This file is licensed under
+  * the terms of the GNU General Public License version 2.  This program
+@@ -17,6 +18,8 @@ XXXX add flash parts, rtc, ??
+ 
+  */
+ 
++/dts-v1/;
++
+ / {
+ 	model = "KuroboxHD";
+ 	compatible = "linkstation";
+@@ -35,19 +38,19 @@ XXXX add flash parts, rtc, ??
+ 
+ 		PowerPC,603e { /* Really 8241 */
+ 			device_type = "cpu";
+-			reg = <0>;
+-			clock-frequency = <bebc200>;	/* Fixed by bootloader */
+-			timebase-frequency = <1743000>; /* Fixed by bootloader */
++			reg = <0x0>;
++			clock-frequency = <200000000>;	/* Fixed by bootloader */
++			timebase-frequency = <24391680>; /* Fixed by bootloader */
+ 			bus-frequency = <0>;		/* Fixed by bootloader */
+ 			/* Following required by dtc but not used */
+-			i-cache-size = <4000>;
+-			d-cache-size = <4000>;
++			i-cache-size = <0x4000>;
++			d-cache-size = <0x4000>;
+ 		};
+ 	};
+ 
+ 	memory {
+ 		device_type = "memory";
+-		reg = <00000000 04000000>;
++		reg = <0x0 0x4000000>;
+ 	};
+ 
+ 	soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
+@@ -56,26 +59,26 @@ XXXX add flash parts, rtc, ??
+ 		device_type = "soc";
+ 		compatible = "mpc10x";
+ 		store-gathering = <0>; /* 0 == off, !0 == on */
+-		reg = <80000000 00100000>;
+-		ranges = <80000000 80000000 70000000	/* pci mem space */
+-			  fc000000 fc000000 00100000	/* EUMB */
+-			  fe000000 fe000000 00c00000	/* pci i/o space */
+-			  fec00000 fec00000 00300000	/* pci cfg regs */
+-			  fef00000 fef00000 00100000>;	/* pci iack */
++		reg = <0x80000000 0x100000>;
++		ranges = <0x80000000 0x80000000 0x70000000	/* pci mem space */
++			  0xfc000000 0xfc000000 0x100000	/* EUMB */
++			  0xfe000000 0xfe000000 0xc00000	/* pci i/o space */
++			  0xfec00000 0xfec00000 0x300000	/* pci cfg regs */
++			  0xfef00000 0xfef00000 0x100000>;	/* pci iack */
+ 
+ 		i2c@80003000 {
+ 			#address-cells = <1>;
+ 			#size-cells = <0>;
+ 			cell-index = <0>;
+ 			compatible = "fsl-i2c";
+-			reg = <80003000 1000>;
++			reg = <0x80003000 0x1000>;
+ 			interrupts = <5 2>;
+ 			interrupt-parent = <&mpic>;
+ 
+ 			rtc@32 {
+ 				device_type = "rtc";
+ 				compatible = "ricoh,rs5c372a";
+-				reg = <32>;
++				reg = <0x32>;
+ 			};
+ 		};
+ 
+@@ -83,9 +86,9 @@ XXXX add flash parts, rtc, ??
+ 			cell-index = <0>;
+ 			device_type = "serial";
+ 			compatible = "ns16550";
+-			reg = <80004500 8>;
+-			clock-frequency = <5d08d88>;
+-			current-speed = <2580>;
++			reg = <0x80004500 0x8>;
++			clock-frequency = <97553800>;
++			current-speed = <9600>;
+ 			interrupts = <9 0>;
+ 			interrupt-parent = <&mpic>;
+ 		};
+@@ -94,10 +97,10 @@ XXXX add flash parts, rtc, ??
+ 			cell-index = <1>;
+ 			device_type = "serial";
+ 			compatible = "ns16550";
+-			reg = <80004600 8>;
+-			clock-frequency = <5d08d88>;
+-			current-speed = <e100>;
+-			interrupts = <a 0>;
++			reg = <0x80004600 0x8>;
++			clock-frequency = <97553800>;
++			current-speed = <57600>;
++			interrupts = <10 0>;
+ 			interrupt-parent = <&mpic>;
+ 		};
+ 
+@@ -107,7 +110,7 @@ XXXX add flash parts, rtc, ??
+ 			device_type = "open-pic";
+ 			compatible = "chrp,open-pic";
+ 			interrupt-controller;
+-			reg = <80040000 40000>;
++			reg = <0x80040000 0x40000>;
+ 		};
+ 
+ 		pci0: pci@fec00000 {
+@@ -116,29 +119,29 @@ XXXX add flash parts, rtc, ??
+ 			#interrupt-cells = <1>;
+ 			device_type = "pci";
+ 			compatible = "mpc10x-pci";
+-			reg = <fec00000 400000>;
+-			ranges = <01000000 0        0 fe000000 0 00c00000
+-				  02000000 0 80000000 80000000 0 70000000>;
+-			bus-range = <0 ff>;
+-			clock-frequency = <7f28155>;
++			reg = <0xfec00000 0x400000>;
++			ranges = <0x1000000 0x0        0x0 0xfe000000 0x0 0xc00000
++				  0x2000000 0x0 0x80000000 0x80000000 0x0 0x70000000>;
++			bus-range = <0 255>;
++			clock-frequency = <133333333>;
+ 			interrupt-parent = <&mpic>;
+-			interrupt-map-mask = <f800 0 0 7>;
++			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ 			interrupt-map = <
+ 				/* IDSEL 11 - IRQ0 ETH */
+-				5800 0 0 1 &mpic 0 1
+-				5800 0 0 2 &mpic 1 1
+-				5800 0 0 3 &mpic 2 1
+-				5800 0 0 4 &mpic 3 1
++				0x5800 0x0 0x0 0x1 &mpic 0x0 0x1
++				0x5800 0x0 0x0 0x2 &mpic 0x1 0x1
++				0x5800 0x0 0x0 0x3 &mpic 0x2 0x1
++				0x5800 0x0 0x0 0x4 &mpic 0x3 0x1
+ 				/* IDSEL 12 - IRQ1 IDE0 */
+-				6000 0 0 1 &mpic 1 1
+-				6000 0 0 2 &mpic 2 1
+-				6000 0 0 3 &mpic 3 1
+-				6000 0 0 4 &mpic 0 1
++				0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
++				0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
++				0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
++				0x6000 0x0 0x0 0x4 &mpic 0x0 0x1
+ 				/* IDSEL 14 - IRQ3 USB2.0 */
+-				7000 0 0 1 &mpic 3 1
+-				7000 0 0 2 &mpic 3 1
+-				7000 0 0 3 &mpic 3 1
+-				7000 0 0 4 &mpic 3 1
++				0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
++				0x7000 0x0 0x0 0x2 &mpic 0x3 0x1
++				0x7000 0x0 0x0 0x3 &mpic 0x3 0x1
++				0x7000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 			>;
+ 		};
+ 	};
+--- a/arch/powerpc/boot/dts/kuroboxHG.dts
++++ b/arch/powerpc/boot/dts/kuroboxHG.dts
+@@ -7,6 +7,7 @@
+  * Based on sandpoint.dts
+  *
+  * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de>
++ * Copyright 2008 Freescale Semiconductor, Inc.
+  *
+  * This file is licensed under
+  * the terms of the GNU General Public License version 2.  This program
+@@ -17,6 +18,8 @@ XXXX add flash parts, rtc, ??
+ 
+  */
+ 
++/dts-v1/;
++
+ / {
+ 	model = "KuroboxHG";
+ 	compatible = "linkstation";
+@@ -35,19 +38,19 @@ XXXX add flash parts, rtc, ??
+ 
+ 		PowerPC,603e { /* Really 8241 */
+ 			device_type = "cpu";
+-			reg = <0>;
+-			clock-frequency = <fdad680>;	/* Fixed by bootloader */
+-			timebase-frequency = <1F04000>; /* Fixed by bootloader */
++			reg = <0x0>;
++			clock-frequency = <266000000>;	/* Fixed by bootloader */
++			timebase-frequency = <32522240>; /* Fixed by bootloader */
+ 			bus-frequency = <0>;		/* Fixed by bootloader */
+ 			/* Following required by dtc but not used */
+-			i-cache-size = <4000>;
+-			d-cache-size = <4000>;
++			i-cache-size = <0x4000>;
++			d-cache-size = <0x4000>;
+ 		};
+ 	};
+ 
+ 	memory {
+ 		device_type = "memory";
+-		reg = <00000000 08000000>;
++		reg = <0x0 0x8000000>;
+ 	};
+ 
+ 	soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
+@@ -56,26 +59,26 @@ XXXX add flash parts, rtc, ??
+ 		device_type = "soc";
+ 		compatible = "mpc10x";
+ 		store-gathering = <0>; /* 0 == off, !0 == on */
+-		reg = <80000000 00100000>;
+-		ranges = <80000000 80000000 70000000	/* pci mem space */
+-			  fc000000 fc000000 00100000	/* EUMB */
+-			  fe000000 fe000000 00c00000	/* pci i/o space */
+-			  fec00000 fec00000 00300000	/* pci cfg regs */
+-			  fef00000 fef00000 00100000>;	/* pci iack */
++		reg = <0x80000000 0x100000>;
++		ranges = <0x80000000 0x80000000 0x70000000	/* pci mem space */
++			  0xfc000000 0xfc000000 0x100000	/* EUMB */
++			  0xfe000000 0xfe000000 0xc00000	/* pci i/o space */
++			  0xfec00000 0xfec00000 0x300000	/* pci cfg regs */
++			  0xfef00000 0xfef00000 0x100000>;	/* pci iack */
+ 
+ 		i2c@80003000 {
+ 			#address-cells = <1>;
+ 			#size-cells = <0>;
+ 			cell-index = <0>;
+ 			compatible = "fsl-i2c";
+-			reg = <80003000 1000>;
++			reg = <0x80003000 0x1000>;
+ 			interrupts = <5 2>;
+ 			interrupt-parent = <&mpic>;
+ 
+ 			rtc@32 {
+ 				device_type = "rtc";
+ 				compatible = "ricoh,rs5c372a";
+-				reg = <32>;
++				reg = <0x32>;
+ 			};
+ 		};
+ 
+@@ -83,9 +86,9 @@ XXXX add flash parts, rtc, ??
+ 			cell-index = <0>;
+ 			device_type = "serial";
+ 			compatible = "ns16550";
+-			reg = <80004500 8>;
+-			clock-frequency = <7c044a8>;
+-			current-speed = <2580>;
++			reg = <0x80004500 0x8>;
++			clock-frequency = <130041000>;
++			current-speed = <9600>;
+ 			interrupts = <9 0>;
+ 			interrupt-parent = <&mpic>;
+ 		};
+@@ -94,10 +97,10 @@ XXXX add flash parts, rtc, ??
+ 			cell-index = <1>;
+ 			device_type = "serial";
+ 			compatible = "ns16550";
+-			reg = <80004600 8>;
+-			clock-frequency = <7c044a8>;
+-			current-speed = <e100>;
+-			interrupts = <a 0>;
++			reg = <0x80004600 0x8>;
++			clock-frequency = <130041000>;
++			current-speed = <57600>;
++			interrupts = <10 0>;
+ 			interrupt-parent = <&mpic>;
+ 		};
+ 
+@@ -107,7 +110,7 @@ XXXX add flash parts, rtc, ??
+ 			device_type = "open-pic";
+ 			compatible = "chrp,open-pic";
+ 			interrupt-controller;
+-			reg = <80040000 40000>;
++			reg = <0x80040000 0x40000>;
+ 		};
+ 
+ 		pci0: pci@fec00000 {
+@@ -116,29 +119,29 @@ XXXX add flash parts, rtc, ??
+ 			#interrupt-cells = <1>;
+ 			device_type = "pci";
+ 			compatible = "mpc10x-pci";
+-			reg = <fec00000 400000>;
+-			ranges = <01000000 0        0 fe000000 0 00c00000
+-				  02000000 0 80000000 80000000 0 70000000>;
+-			bus-range = <0 ff>;
+-			clock-frequency = <7f28155>;
++			reg = <0xfec00000 0x400000>;
++			ranges = <0x1000000 0x0        0x0 0xfe000000 0x0 0xc00000
++				  0x2000000 0x0 0x80000000 0x80000000 0x0 0x70000000>;
++			bus-range = <0 255>;
++			clock-frequency = <133333333>;
+ 			interrupt-parent = <&mpic>;
+-			interrupt-map-mask = <f800 0 0 7>;
++			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ 			interrupt-map = <
+ 				/* IDSEL 11 - IRQ0 ETH */
+-				5800 0 0 1 &mpic 0 1
+-				5800 0 0 2 &mpic 1 1
+-				5800 0 0 3 &mpic 2 1
+-				5800 0 0 4 &mpic 3 1
++				0x5800 0x0 0x0 0x1 &mpic 0x0 0x1
++				0x5800 0x0 0x0 0x2 &mpic 0x1 0x1
++				0x5800 0x0 0x0 0x3 &mpic 0x2 0x1
++				0x5800 0x0 0x0 0x4 &mpic 0x3 0x1
+ 				/* IDSEL 12 - IRQ1 IDE0 */
+-				6000 0 0 1 &mpic 1 1
+-				6000 0 0 2 &mpic 2 1
+-				6000 0 0 3 &mpic 3 1
+-				6000 0 0 4 &mpic 0 1
++				0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
++				0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
++				0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
++				0x6000 0x0 0x0 0x4 &mpic 0x0 0x1
+ 				/* IDSEL 14 - IRQ3 USB2.0 */
+-				7000 0 0 1 &mpic 3 1
+-				7000 0 0 2 &mpic 3 1
+-				7000 0 0 3 &mpic 3 1
+-				7000 0 0 4 &mpic 3 1
++				0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
++				0x7000 0x0 0x0 0x2 &mpic 0x3 0x1
++				0x7000 0x0 0x0 0x3 &mpic 0x3 0x1
++				0x7000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 			>;
+ 		};
+ 	};
+--- a/arch/powerpc/boot/dts/makalu.dts
++++ b/arch/powerpc/boot/dts/makalu.dts
+@@ -219,7 +219,7 @@
+ 				mal-tx-channel = <0>;
+ 				mal-rx-channel = <0>;
+ 				cell-index = <0>;
+-				max-frame-size = <5dc>;
++				max-frame-size = <2328>;
+ 				rx-fifo-size = <1000>;
+ 				tx-fifo-size = <800>;
+ 				phy-mode = "rgmii";
+@@ -247,7 +247,7 @@
+ 				mal-tx-channel = <1>;
+ 				mal-rx-channel = <1>;
+ 				cell-index = <1>;
+-				max-frame-size = <5dc>;
++				max-frame-size = <2328>;
+ 				rx-fifo-size = <1000>;
+ 				tx-fifo-size = <800>;
+ 				phy-mode = "rgmii";
+--- a/arch/powerpc/boot/dts/mpc7448hpc2.dts
++++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts
+@@ -1,7 +1,7 @@
+ /*
+  * MPC7448HPC2 (Taiga) board Device Tree Source
+  *
+- * Copyright 2006 Freescale Semiconductor Inc.
++ * Copyright 2006, 2008 Freescale Semiconductor Inc.
+  * 2006 Roy Zang <Roy Zang at freescale.com>.
+  *
+  * This program is free software; you can redistribute  it and/or modify it
+@@ -10,6 +10,7 @@
+  * option) any later version.
+  */
+ 
++/dts-v1/;
+ 
+ / {
+ 	model = "mpc7448hpc2";
+@@ -23,11 +24,11 @@
+ 				
+ 		PowerPC,7448@0 {
+ 			device_type = "cpu";
+-			reg = <0>;
+-			d-cache-line-size = <20>;	// 32 bytes
+-			i-cache-line-size = <20>;	// 32 bytes
+-			d-cache-size = <8000>;		// L1, 32K bytes
+-			i-cache-size = <8000>;		// L1, 32K bytes
++			reg = <0x0>;
++			d-cache-line-size = <32>;	// 32 bytes
++			i-cache-line-size = <32>;	// 32 bytes
++			d-cache-size = <0x8000>;		// L1, 32K bytes
++			i-cache-size = <0x8000>;		// L1, 32K bytes
+ 			timebase-frequency = <0>;	// 33 MHz, from uboot
+ 			clock-frequency = <0>;		// From U-Boot
+ 			bus-frequency = <0>;		// From U-Boot
+@@ -36,7 +37,7 @@
+ 
+ 	memory {
+ 		device_type = "memory";
+-		reg = <00000000 20000000	// DDR2   512M at 0
++		reg = <0x0 0x20000000	// DDR2   512M at 0
+ 		       >;
+ 	};
+ 
+@@ -44,14 +45,14 @@
+ 		#address-cells = <1>;
+ 		#size-cells = <1>;
+ 		device_type = "tsi-bridge";
+-		ranges = <00000000 c0000000 00010000>;
+-		reg = <c0000000 00010000>;
++		ranges = <0x0 0xc0000000 0x10000>;
++		reg = <0xc0000000 0x10000>;
+ 		bus-frequency = <0>;
+ 
+ 		i2c@7000 {
+ 			interrupt-parent = <&mpic>;
+-			interrupts = <E 0>;
+-			reg = <7000 400>;
++			interrupts = <14 0>;
++			reg = <0x7000 0x400>;
+ 			device_type = "i2c";
+ 			compatible  = "tsi108-i2c";
+ 		};
+@@ -59,20 +60,20 @@
+ 		MDIO: mdio@6000 {
+ 			device_type = "mdio";
+ 			compatible = "tsi108-mdio";
+-			reg = <6000 50>;
++			reg = <0x6000 0x50>;
+ 			#address-cells = <1>;
+ 			#size-cells = <0>;
+ 
+ 			phy8: ethernet-phy@8 {
+ 				interrupt-parent = <&mpic>;
+ 				interrupts = <2 1>;
+-				reg = <8>;
++				reg = <0x8>;
+ 			};
+ 
+ 			phy9: ethernet-phy@9 {
+ 				interrupt-parent = <&mpic>;
+ 				interrupts = <2 1>;
+-				reg = <9>;
++				reg = <0x9>;
+ 			};
+ 
+ 		};
+@@ -82,9 +83,9 @@
+ 			#size-cells = <0>;
+ 			device_type = "network";
+ 			compatible = "tsi108-ethernet";
+-			reg = <6000 200>;
++			reg = <0x6000 0x200>;
+ 			address = [ 00 06 D2 00 00 01 ];
+-			interrupts = <10 2>;
++			interrupts = <16 2>;
+ 			interrupt-parent = <&mpic>;
+ 			mdio-handle = <&MDIO>;
+ 			phy-handle = <&phy8>;
+@@ -96,9 +97,9 @@
+ 			#size-cells = <0>;
+ 			device_type = "network";
+ 			compatible = "tsi108-ethernet";
+-			reg = <6400 200>;
++			reg = <0x6400 0x200>;
+ 			address = [ 00 06 D2 00 00 02 ];
+-			interrupts = <11 2>;
++			interrupts = <17 2>;
+ 			interrupt-parent = <&mpic>;
+ 			mdio-handle = <&MDIO>;
+ 			phy-handle = <&phy9>;
+@@ -107,18 +108,18 @@
+ 		serial@7808 {
+ 			device_type = "serial";
+ 			compatible = "ns16550";
+-			reg = <7808 200>;
+-			clock-frequency = <3f6b5a00>;
+-			interrupts = <c 0>;
++			reg = <0x7808 0x200>;
++			clock-frequency = <1064000000>;
++			interrupts = <12 0>;
+ 			interrupt-parent = <&mpic>;
+ 		};
+ 
+ 		serial@7c08 {
+ 			device_type = "serial";
+ 			compatible = "ns16550";
+-			reg = <7c08 200>;
+-			clock-frequency = <3f6b5a00>;
+-			interrupts = <d 0>;
++			reg = <0x7c08 0x200>;
++			clock-frequency = <1064000000>;
++			interrupts = <13 0>;
+ 			interrupt-parent = <&mpic>;
+ 		};
+ 
+@@ -127,7 +128,7 @@
+ 			interrupt-controller;
+ 			#address-cells = <0>;
+ 			#interrupt-cells = <2>;
+-			reg = <7400 400>;
++			reg = <0x7400 0x400>;
+ 			compatible = "chrp,open-pic";
+ 			device_type = "open-pic";
+                        	big-endian;
+@@ -138,39 +139,39 @@
+ 			#interrupt-cells = <1>;
+ 			#size-cells = <2>;
+ 			#address-cells = <3>;
+-			reg = <1000 1000>;
++			reg = <0x1000 0x1000>;
+ 			bus-range = <0 0>;
+-			ranges = <02000000 0 e0000000 e0000000 0 1A000000	
+-				  01000000 0 00000000 fa000000 0 00010000>;
+-			clock-frequency = <7f28154>;
++			ranges = <0x2000000 0x0 0xe0000000 0xe0000000 0x0 0x1a000000	
++				  0x1000000 0x0 0x0 0xfa000000 0x0 0x10000>;
++			clock-frequency = <133333332>;
+ 			interrupt-parent = <&mpic>;
+-			interrupts = <17 2>;
+-			interrupt-map-mask = <f800 0 0 7>;
++			interrupts = <23 2>;
++			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ 			interrupt-map = <
+ 
+ 				/* IDSEL 0x11 */
+-				0800 0 0 1 &RT0 24 0
+-				0800 0 0 2 &RT0 25 0
+-				0800 0 0 3 &RT0 26 0
+-				0800 0 0 4 &RT0 27 0
++				0x800 0x0 0x0 0x1 &RT0 0x24 0x0
++				0x800 0x0 0x0 0x2 &RT0 0x25 0x0
++				0x800 0x0 0x0 0x3 &RT0 0x26 0x0
++				0x800 0x0 0x0 0x4 &RT0 0x27 0x0
+ 
+ 				/* IDSEL 0x12 */
+-				1000 0 0 1 &RT0 25 0
+-				1000 0 0 2 &RT0 26 0
+-				1000 0 0 3 &RT0 27 0
+-				1000 0 0 4 &RT0 24 0
++				0x1000 0x0 0x0 0x1 &RT0 0x25 0x0
++				0x1000 0x0 0x0 0x2 &RT0 0x26 0x0
++				0x1000 0x0 0x0 0x3 &RT0 0x27 0x0
++				0x1000 0x0 0x0 0x4 &RT0 0x24 0x0
+ 
+ 				/* IDSEL 0x13 */
+-				1800 0 0 1 &RT0 26 0
+-				1800 0 0 2 &RT0 27 0
+-				1800 0 0 3 &RT0 24 0
+-				1800 0 0 4 &RT0 25 0
++				0x1800 0x0 0x0 0x1 &RT0 0x26 0x0
++				0x1800 0x0 0x0 0x2 &RT0 0x27 0x0
++				0x1800 0x0 0x0 0x3 &RT0 0x24 0x0
++				0x1800 0x0 0x0 0x4 &RT0 0x25 0x0
+ 
+ 				/* IDSEL 0x14 */
+-				2000 0 0 1 &RT0 27 0
+-				2000 0 0 2 &RT0 24 0
+-				2000 0 0 3 &RT0 25 0
+-				2000 0 0 4 &RT0 26 0
++				0x2000 0x0 0x0 0x1 &RT0 0x27 0x0
++				0x2000 0x0 0x0 0x2 &RT0 0x24 0x0
++				0x2000 0x0 0x0 0x3 &RT0 0x25 0x0
++				0x2000 0x0 0x0 0x4 &RT0 0x26 0x0
+ 				>;
+ 
+ 			RT0: router@1180 {
+@@ -180,7 +181,7 @@
+ 				#address-cells = <0>;
+ 				#interrupt-cells = <2>;
+ 				big-endian;
+-				interrupts = <17 2>;
++				interrupts = <23 2>;
+ 				interrupt-parent = <&mpic>;
+ 			};
+ 		};
+--- a/arch/powerpc/boot/dts/mpc8272ads.dts
++++ b/arch/powerpc/boot/dts/mpc8272ads.dts
+@@ -1,7 +1,7 @@
+ /*
+  * MPC8272 ADS Device Tree Source
+  *
+- * Copyright 2005 Freescale Semiconductor Inc.
++ * Copyright 2005,2008 Freescale Semiconductor Inc.
+  *
+  * This program is free software; you can redistribute  it and/or modify it
+  * under  the terms of  the GNU General  Public License as published by the
+@@ -9,6 +9,8 @@
+  * option) any later version.
+  */
+ 
++/dts-v1/;
++
+ / {
+ 	model = "MPC8272ADS";
+ 	compatible = "fsl,mpc8272ads";
+@@ -21,11 +23,11 @@
+ 
+ 		PowerPC,8272@0 {
+ 			device_type = "cpu";
+-			reg = <0>;
+-			d-cache-line-size = <d#32>;
+-			i-cache-line-size = <d#32>;
+-			d-cache-size = <d#16384>;
+-			i-cache-size = <d#16384>;
++			reg = <0x0>;
++			d-cache-line-size = <32>;
++			i-cache-line-size = <32>;
++			d-cache-size = <16384>;
++			i-cache-size = <16384>;
+ 			timebase-frequency = <0>;
+ 			bus-frequency = <0>;
+ 			clock-frequency = <0>;
+@@ -34,7 +36,7 @@
+ 
+ 	memory {
+ 		device_type = "memory";
+-		reg = <0 0>;
++		reg = <0x0 0x0>;
+ 	};
+ 
+ 	localbus@f0010100 {
+@@ -42,21 +44,21 @@
+ 		             "fsl,pq2-localbus";
+ 		#address-cells = <2>;
+ 		#size-cells = <1>;
+-		reg = <f0010100 40>;
++		reg = <0xf0010100 0x40>;
+ 
+-		ranges = <0 0 fe000000 02000000
+-		          1 0 f4500000 00008000
+-		          3 0 f8200000 00008000>;
++		ranges = <0x0 0x0 0xfe000000 0x2000000
++		          0x1 0x0 0xf4500000 0x8000
++		          0x3 0x0 0xf8200000 0x8000>;
+ 
+ 		flash@0,0 {
+ 			compatible = "jedec-flash";
+-			reg = <0 0 2000000>;
++			reg = <0x0 0x0 0x2000000>;
+ 			bank-width = <4>;
+ 			device-width = <1>;
+ 		};
+ 
+ 		board-control@1,0 {
+-			reg = <1 0 20>;
++			reg = <0x1 0x0 0x20>;
+ 			compatible = "fsl,mpc8272ads-bcsr";
+ 		};
+ 
+@@ -65,46 +67,46 @@
+ 			             "fsl,pq2ads-pci-pic";
+ 			#interrupt-cells = <1>;
+ 			interrupt-controller;
+-			reg = <3 0 8>;
++			reg = <0x3 0x0 0x8>;
+ 			interrupt-parent = <&PIC>;
+-			interrupts = <14 8>;
++			interrupts = <20 8>;
+ 		};
+ 	};
+ 
+ 
+ 	pci@f0010800 {
+ 		device_type = "pci";
+-		reg = <f0010800 10c f00101ac 8 f00101c4 8>;
++		reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>;
+ 		compatible = "fsl,mpc8272-pci", "fsl,pq2-pci";
+ 		#interrupt-cells = <1>;
+ 		#size-cells = <2>;
+ 		#address-cells = <3>;
+-		clock-frequency = <d#66666666>;
+-		interrupt-map-mask = <f800 0 0 7>;
++		clock-frequency = <66666666>;
++		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ 		interrupt-map = <
+ 		                 /* IDSEL 0x16 */
+-		                 b000 0 0 1 &PCI_PIC 0
+-		                 b000 0 0 2 &PCI_PIC 1
+-		                 b000 0 0 3 &PCI_PIC 2
+-		                 b000 0 0 4 &PCI_PIC 3
++		                 0xb000 0x0 0x0 0x1 &PCI_PIC 0
++		                 0xb000 0x0 0x0 0x2 &PCI_PIC 1
++		                 0xb000 0x0 0x0 0x3 &PCI_PIC 2
++		                 0xb000 0x0 0x0 0x4 &PCI_PIC 3
+ 
+ 		                 /* IDSEL 0x17 */
+-		                 b800 0 0 1 &PCI_PIC 4
+-		                 b800 0 0 2 &PCI_PIC 5
+-		                 b800 0 0 3 &PCI_PIC 6
+-		                 b800 0 0 4 &PCI_PIC 7
++		                 0xb800 0x0 0x0 0x1 &PCI_PIC 4
++		                 0xb800 0x0 0x0 0x2 &PCI_PIC 5
++		                 0xb800 0x0 0x0 0x3 &PCI_PIC 6
++		                 0xb800 0x0 0x0 0x4 &PCI_PIC 7
+ 
+ 		                 /* IDSEL 0x18 */
+-		                 c000 0 0 1 &PCI_PIC 8
+-		                 c000 0 0 2 &PCI_PIC 9
+-		                 c000 0 0 3 &PCI_PIC a
+-		                 c000 0 0 4 &PCI_PIC b>;
++		                 0xc000 0x0 0x0 0x1 &PCI_PIC 8
++		                 0xc000 0x0 0x0 0x2 &PCI_PIC 9
++		                 0xc000 0x0 0x0 0x3 &PCI_PIC 10
++		                 0xc000 0x0 0x0 0x4 &PCI_PIC 11>;
+ 
+ 		interrupt-parent = <&PIC>;
+-		interrupts = <12 8>;
+-		ranges = <42000000 0 80000000 80000000 0 20000000
+-		          02000000 0 a0000000 a0000000 0 20000000
+-		          01000000 0 00000000 f6000000 0 02000000>;
++		interrupts = <18 8>;
++		ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000
++		          0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
++		          0x1000000 0x0 0x0 0xf6000000 0x0 0x2000000>;
+ 	};
+ 
+ 	soc@f0000000 {
+@@ -112,26 +114,26 @@
+ 		#size-cells = <1>;
+ 		device_type = "soc";
+ 		compatible = "fsl,mpc8272", "fsl,pq2-soc";
+-		ranges = <00000000 f0000000 00053000>;
++		ranges = <0x0 0xf0000000 0x53000>;
+ 
+ 		// Temporary -- will go away once kernel uses ranges for get_immrbase().
+-		reg = <f0000000 00053000>;
++		reg = <0xf0000000 0x53000>;
+ 
+ 		cpm@119c0 {
+ 			#address-cells = <1>;
+ 			#size-cells = <1>;
+ 			compatible = "fsl,mpc8272-cpm", "fsl,cpm2";
+-			reg = <119c0 30>;
++			reg = <0x119c0 0x30>;
+ 			ranges;
+ 
+ 			muram@0 {
+ 				#address-cells = <1>;
+ 				#size-cells = <1>;
+-				ranges = <0 0 10000>;
++				ranges = <0x0 0x0 0x10000>;
+ 
+ 				data@0 {
+ 					compatible = "fsl,cpm-muram-data";
+-					reg = <0 2000 9800 800>;
++					reg = <0x0 0x2000 0x9800 0x800>;
+ 				};
+ 			};
+ 
+@@ -139,29 +141,29 @@
+ 				compatible = "fsl,mpc8272-brg",
+ 				             "fsl,cpm2-brg",
+ 				             "fsl,cpm-brg";
+-				reg = <119f0 10 115f0 10>;
++				reg = <0x119f0 0x10 0x115f0 0x10>;
+ 			};
+ 
+ 			serial@11a00 {
+ 				device_type = "serial";
+ 				compatible = "fsl,mpc8272-scc-uart",
+ 				             "fsl,cpm2-scc-uart";
+-				reg = <11a00 20 8000 100>;
+-				interrupts = <28 8>;
++				reg = <0x11a00 0x20 0x8000 0x100>;
++				interrupts = <40 8>;
+ 				interrupt-parent = <&PIC>;
+ 				fsl,cpm-brg = <1>;
+-				fsl,cpm-command = <00800000>;
++				fsl,cpm-command = <0x800000>;
+ 			};
+ 
+ 			serial@11a60 {
+ 				device_type = "serial";
+ 				compatible = "fsl,mpc8272-scc-uart",
+ 				             "fsl,cpm2-scc-uart";
+-				reg = <11a60 20 8300 100>;
+-				interrupts = <2b 8>;
++				reg = <0x11a60 0x20 0x8300 0x100>;
++				interrupts = <43 8>;
+ 				interrupt-parent = <&PIC>;
+ 				fsl,cpm-brg = <4>;
+-				fsl,cpm-command = <0ce00000>;
++				fsl,cpm-command = <0xce00000>;
+ 			};
+ 
+ 			mdio@10d40 {
+@@ -169,23 +171,23 @@
+ 				compatible = "fsl,mpc8272ads-mdio-bitbang",
+ 				             "fsl,mpc8272-mdio-bitbang",
+ 				             "fsl,cpm2-mdio-bitbang";
+-				reg = <10d40 14>;
++				reg = <0x10d40 0x14>;
+ 				#address-cells = <1>;
+ 				#size-cells = <0>;
+-				fsl,mdio-pin = <12>;
+-				fsl,mdc-pin = <13>;
++				fsl,mdio-pin = <18>;
++				fsl,mdc-pin = <19>;
+ 
+ 				PHY0: ethernet-phy@0 {
+ 					interrupt-parent = <&PIC>;
+-					interrupts = <17 8>;
+-					reg = <0>;
++					interrupts = <23 8>;
++					reg = <0x0>;
+ 					device_type = "ethernet-phy";
+ 				};
+ 
+ 				PHY1: ethernet-phy@1 {
+ 					interrupt-parent = <&PIC>;
+-					interrupts = <17 8>;
+-					reg = <3>;
++					interrupts = <23 8>;
++					reg = <0x3>;
+ 					device_type = "ethernet-phy";
+ 				};
+ 			};
+@@ -194,33 +196,33 @@
+ 				device_type = "network";
+ 				compatible = "fsl,mpc8272-fcc-enet",
+ 				             "fsl,cpm2-fcc-enet";
+-				reg = <11300 20 8400 100 11390 1>;
++				reg = <0x11300 0x20 0x8400 0x100 0x11390 0x1>;
+ 				local-mac-address = [ 00 00 00 00 00 00 ];
+-				interrupts = <20 8>;
++				interrupts = <32 8>;
+ 				interrupt-parent = <&PIC>;
+ 				phy-handle = <&PHY0>;
+ 				linux,network-index = <0>;
+-				fsl,cpm-command = <12000300>;
++				fsl,cpm-command = <0x12000300>;
+ 			};
+ 
+ 			ethernet@11320 {
+ 				device_type = "network";
+ 				compatible = "fsl,mpc8272-fcc-enet",
+ 				             "fsl,cpm2-fcc-enet";
+-				reg = <11320 20 8500 100 113b0 1>;
++				reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>;
+ 				local-mac-address = [ 00 00 00 00 00 00 ];
+-				interrupts = <21 8>;
++				interrupts = <33 8>;
+ 				interrupt-parent = <&PIC>;
+ 				phy-handle = <&PHY1>;
+ 				linux,network-index = <1>;
+-				fsl,cpm-command = <16200300>;
++				fsl,cpm-command = <0x16200300>;
+ 			};
+ 		};
+ 
+ 		PIC: interrupt-controller@10c00 {
+ 			#interrupt-cells = <2>;
+ 			interrupt-controller;
+-			reg = <10c00 80>;
++			reg = <0x10c00 0x80>;
+ 			compatible = "fsl,mpc8272-pic", "fsl,cpm2-pic";
+ 		};
+ 
+@@ -232,14 +234,14 @@
+ 			             "fsl,talitos-sec2",
+ 			             "fsl,talitos",
+ 			             "talitos";
+-			reg = <30000 10000>;
+-			interrupts = <b 8>;
++			reg = <0x30000 0x10000>;
++			interrupts = <11 8>;
+ 			interrupt-parent = <&PIC>;
+ 			num-channels = <4>;
+-			channel-fifo-len = <18>;
+-			exec-units-mask = <0000007e>;
++			channel-fifo-len = <24>;
++			exec-units-mask = <0x7e>;
+ /* desc mask is for rev1.x, we need runtime fixup for >=2.x */
+-			descriptor-types-mask = <01010ebf>;
++			descriptor-types-mask = <0x1010ebf>;
+ 		};
+ 	};
+ 
+--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
++++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
+@@ -255,9 +255,7 @@
+ 		enet0: ucc@2200 {
+ 			device_type = "network";
+ 			compatible = "ucc_geth";
+-			model = "UCC";
+ 			cell-index = <3>;
+-			device-id = <3>;
+ 			reg = <0x2200 0x200>;
+ 			interrupts = <34>;
+ 			interrupt-parent = <&qeic>;
+@@ -271,9 +269,7 @@
+ 		enet1: ucc@3200 {
+ 			device_type = "network";
+ 			compatible = "ucc_geth";
+-			model = "UCC";
+ 			cell-index = <4>;
+-			device-id = <4>;
+ 			reg = <0x3200 0x200>;
+ 			interrupts = <35>;
+ 			interrupt-parent = <&qeic>;
+@@ -287,8 +283,7 @@
+ 		ucc@2400 {
+ 			device_type = "serial";
+ 			compatible = "ucc_uart";
+-			model = "UCC";
+-			device-id = <5>;	/* The UCC number, 1-7*/
++			cell-index = <5>;	/* The UCC number, 1-7*/
+ 			port-number = <0>;	/* Which ttyQEx device */
+ 			soft-uart;		/* We need Soft-UART */
+ 			reg = <0x2400 0x200>;
+--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
++++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
+@@ -208,9 +208,7 @@
+ 		enet0: ucc@3000 {
+ 			device_type = "network";
+ 			compatible = "ucc_geth";
+-			model = "UCC";
+ 			cell-index = <2>;
+-			device-id = <2>;
+ 			reg = <0x3000 0x200>;
+ 			interrupts = <33>;
+ 			interrupt-parent = <&qeic>;
+@@ -224,9 +222,7 @@
+ 		enet1: ucc@2200 {
+ 			device_type = "network";
+ 			compatible = "ucc_geth";
+-			model = "UCC";
+ 			cell-index = <3>;
+-			device-id = <3>;
+ 			reg = <0x2200 0x200>;
+ 			interrupts = <34>;
+ 			interrupt-parent = <&qeic>;
+--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
++++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
+@@ -257,9 +257,7 @@
+ 		enet0: ucc@2000 {
+ 			device_type = "network";
+ 			compatible = "ucc_geth";
+-			model = "UCC";
+ 			cell-index = <1>;
+-			device-id = <1>;
+ 			reg = <0x2000 0x200>;
+ 			interrupts = <32>;
+ 			interrupt-parent = <&qeic>;
+@@ -274,9 +272,7 @@
+ 		enet1: ucc@3000 {
+ 			device_type = "network";
+ 			compatible = "ucc_geth";
+-			model = "UCC";
+ 			cell-index = <2>;
+-			device-id = <2>;
+ 			reg = <0x3000 0x200>;
+ 			interrupts = <33>;
+ 			interrupt-parent = <&qeic>;
+--- a/arch/powerpc/boot/dts/mpc8540ads.dts
++++ b/arch/powerpc/boot/dts/mpc8540ads.dts
+@@ -1,7 +1,7 @@
+ /*
+  * MPC8540 ADS Device Tree Source
+  *
+- * Copyright 2006 Freescale Semiconductor Inc.
++ * Copyright 2006, 2008 Freescale Semiconductor Inc.
+  *
+  * This program is free software; you can redistribute  it and/or modify it
+  * under  the terms of  the GNU General  Public License as published by the
+@@ -9,6 +9,7 @@
+  * option) any later version.
+  */
+ 
++/dts-v1/;
+ 
+ / {
+ 	model = "MPC8540ADS";
+@@ -31,11 +32,11 @@
+ 
+ 		PowerPC,8540@0 {
+ 			device_type = "cpu";
+-			reg = <0>;
+-			d-cache-line-size = <20>;	// 32 bytes
+-			i-cache-line-size = <20>;	// 32 bytes
+-			d-cache-size = <8000>;		// L1, 32K
+-			i-cache-size = <8000>;		// L1, 32K
++			reg = <0x0>;
++			d-cache-line-size = <32>;	// 32 bytes
++			i-cache-line-size = <32>;	// 32 bytes
++			d-cache-size = <0x8000>;		// L1, 32K
++			i-cache-size = <0x8000>;		// L1, 32K
+ 			timebase-frequency = <0>;	//  33 MHz, from uboot
+ 			bus-frequency = <0>;	// 166 MHz
+ 			clock-frequency = <0>;	// 825 MHz, from uboot
+@@ -44,31 +45,31 @@
+ 
+ 	memory {
+ 		device_type = "memory";
+-		reg = <00000000 08000000>;	// 128M at 0x0
++		reg = <0x0 0x8000000>;	// 128M at 0x0
+ 	};
+ 
+ 	soc8540@e0000000 {
+ 		#address-cells = <1>;
+ 		#size-cells = <1>;
+ 		device_type = "soc";
+-		ranges = <0 e0000000 00100000>;
+-		reg = <e0000000 00100000>;	// CCSRBAR 1M
++		ranges = <0x0 0xe0000000 0x100000>;
++		reg = <0xe0000000 0x100000>;	// CCSRBAR 1M
+ 		bus-frequency = <0>;
+ 
+ 		memory-controller@2000 {
+ 			compatible = "fsl,8540-memory-controller";
+-			reg = <2000 1000>;
++			reg = <0x2000 0x1000>;
+ 			interrupt-parent = <&mpic>;
+-			interrupts = <12 2>;
++			interrupts = <18 2>;
+ 		};
+ 
+ 		l2-cache-controller@20000 {
+ 			compatible = "fsl,8540-l2-cache-controller";
+-			reg = <20000 1000>;
+-			cache-line-size = <20>;	// 32 bytes
+-			cache-size = <40000>;	// L2, 256K
++			reg = <0x20000 0x1000>;
++			cache-line-size = <32>;	// 32 bytes
++			cache-size = <0x40000>;	// L2, 256K
+ 			interrupt-parent = <&mpic>;
+-			interrupts = <10 2>;
++			interrupts = <16 2>;
+ 		};
+ 
+ 		i2c@3000 {
+@@ -76,8 +77,8 @@
+ 			#size-cells = <0>;
+ 			cell-index = <0>;
+ 			compatible = "fsl-i2c";
+-			reg = <3000 100>;
+-			interrupts = <2b 2>;
++			reg = <0x3000 0x100>;
++			interrupts = <43 2>;
+ 			interrupt-parent = <&mpic>;
+ 			dfsrr;
+ 		};
+@@ -86,24 +87,24 @@
+ 			#address-cells = <1>;
+ 			#size-cells = <0>;
+ 			compatible = "fsl,gianfar-mdio";
+-			reg = <24520 20>;
++			reg = <0x24520 0x20>;
+ 
+ 			phy0: ethernet-phy@0 {
+ 				interrupt-parent = <&mpic>;
+ 				interrupts = <5 1>;
+-				reg = <0>;
++				reg = <0x0>;
+ 				device_type = "ethernet-phy";
+ 			};
+ 			phy1: ethernet-phy@1 {
+ 				interrupt-parent = <&mpic>;
+ 				interrupts = <5 1>;
+-				reg = <1>;
++				reg = <0x1>;
+ 				device_type = "ethernet-phy";
+ 			};
+ 			phy3: ethernet-phy@3 {
+ 				interrupt-parent = <&mpic>;
+ 				interrupts = <7 1>;
+-				reg = <3>;
++				reg = <0x3>;
+ 				device_type = "ethernet-phy";
+ 			};
+ 		};
+@@ -113,9 +114,9 @@
+ 			device_type = "network";
+ 			model = "TSEC";
+ 			compatible = "gianfar";
+-			reg = <24000 1000>;
++			reg = <0x24000 0x1000>;
+ 			local-mac-address = [ 00 00 00 00 00 00 ];
+-			interrupts = <1d 2 1e 2 22 2>;
++			interrupts = <29 2 30 2 34 2>;
+ 			interrupt-parent = <&mpic>;
+ 			phy-handle = <&phy0>;
+ 		};
+@@ -125,9 +126,9 @@
+ 			device_type = "network";
+ 			model = "TSEC";
+ 			compatible = "gianfar";
+-			reg = <25000 1000>;
++			reg = <0x25000 0x1000>;
+ 			local-mac-address = [ 00 00 00 00 00 00 ];
+-			interrupts = <23 2 24 2 28 2>;
++			interrupts = <35 2 36 2 40 2>;
+ 			interrupt-parent = <&mpic>;
+ 			phy-handle = <&phy1>;
+ 		};
+@@ -137,9 +138,9 @@
+ 			device_type = "network";
+ 			model = "FEC";
+ 			compatible = "gianfar";
+-			reg = <26000 1000>;
++			reg = <0x26000 0x1000>;
+ 			local-mac-address = [ 00 00 00 00 00 00 ];
+-			interrupts = <29 2>;
++			interrupts = <41 2>;
+ 			interrupt-parent = <&mpic>;
+ 			phy-handle = <&phy3>;
+ 		};
+@@ -148,9 +149,9 @@
+ 			cell-index = <0>;
+ 			device_type = "serial";
+ 			compatible = "ns16550";
+-			reg = <4500 100>; 	// reg base, size
++			reg = <0x4500 0x100>; 	// reg base, size
+ 			clock-frequency = <0>; 	// should we fill in in uboot?
+-			interrupts = <2a 2>;
++			interrupts = <42 2>;
+ 			interrupt-parent = <&mpic>;
+ 		};
+ 
+@@ -158,9 +159,9 @@
+ 			cell-index = <1>;
+ 			device_type = "serial";
+ 			compatible = "ns16550";
+-			reg = <4600 100>;	// reg base, size
++			reg = <0x4600 0x100>;	// reg base, size
+ 			clock-frequency = <0>; 	// should we fill in in uboot?
+-			interrupts = <2a 2>;
++			interrupts = <42 2>;
+ 			interrupt-parent = <&mpic>;
+ 		};
+ 		mpic: pic@40000 {
+@@ -168,7 +169,7 @@
+ 			interrupt-controller;
+ 			#address-cells = <0>;
+ 			#interrupt-cells = <2>;
+-			reg = <40000 40000>;
++			reg = <0x40000 0x40000>;
+ 			compatible = "chrp,open-pic";
+ 			device_type = "open-pic";
+ 			big-endian;
+@@ -177,90 +178,90 @@
+ 
+ 	pci0: pci@e0008000 {
+ 		cell-index = <0>;
+-		interrupt-map-mask = <f800 0 0 7>;
++		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ 		interrupt-map = <
+ 
+ 			/* IDSEL 0x02 */
+-			1000 0 0 1 &mpic 1 1
+-			1000 0 0 2 &mpic 2 1
+-			1000 0 0 3 &mpic 3 1
+-			1000 0 0 4 &mpic 4 1
++			0x1000 0x0 0x0 0x1 &mpic 0x1 0x1
++			0x1000 0x0 0x0 0x2 &mpic 0x2 0x1
++			0x1000 0x0 0x0 0x3 &mpic 0x3 0x1
++			0x1000 0x0 0x0 0x4 &mpic 0x4 0x1
+ 
+ 			/* IDSEL 0x03 */
+-			1800 0 0 1 &mpic 4 1
+-			1800 0 0 2 &mpic 1 1
+-			1800 0 0 3 &mpic 2 1
+-			1800 0 0 4 &mpic 3 1
++			0x1800 0x0 0x0 0x1 &mpic 0x4 0x1
++			0x1800 0x0 0x0 0x2 &mpic 0x1 0x1
++			0x1800 0x0 0x0 0x3 &mpic 0x2 0x1
++			0x1800 0x0 0x0 0x4 &mpic 0x3 0x1
+ 
+ 			/* IDSEL 0x04 */
+-			2000 0 0 1 &mpic 3 1
+-			2000 0 0 2 &mpic 4 1
+-			2000 0 0 3 &mpic 1 1
+-			2000 0 0 4 &mpic 2 1
++			0x2000 0x0 0x0 0x1 &mpic 0x3 0x1
++			0x2000 0x0 0x0 0x2 &mpic 0x4 0x1
++			0x2000 0x0 0x0 0x3 &mpic 0x1 0x1
++			0x2000 0x0 0x0 0x4 &mpic 0x2 0x1
+ 
+ 			/* IDSEL 0x05 */
+-			2800 0 0 1 &mpic 2 1
+-			2800 0 0 2 &mpic 3 1
+-			2800 0 0 3 &mpic 4 1
+-			2800 0 0 4 &mpic 1 1
++			0x2800 0x0 0x0 0x1 &mpic 0x2 0x1
++			0x2800 0x0 0x0 0x2 &mpic 0x3 0x1
++			0x2800 0x0 0x0 0x3 &mpic 0x4 0x1
++			0x2800 0x0 0x0 0x4 &mpic 0x1 0x1
+ 
+ 			/* IDSEL 0x0c */
+-			6000 0 0 1 &mpic 1 1
+-			6000 0 0 2 &mpic 2 1
+-			6000 0 0 3 &mpic 3 1
+-			6000 0 0 4 &mpic 4 1
++			0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
++			0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
++			0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
++			0x6000 0x0 0x0 0x4 &mpic 0x4 0x1
+ 
+ 			/* IDSEL 0x0d */
+-			6800 0 0 1 &mpic 4 1
+-			6800 0 0 2 &mpic 1 1
+-			6800 0 0 3 &mpic 2 1
+-			6800 0 0 4 &mpic 3 1
++			0x6800 0x0 0x0 0x1 &mpic 0x4 0x1
++			0x6800 0x0 0x0 0x2 &mpic 0x1 0x1
++			0x6800 0x0 0x0 0x3 &mpic 0x2 0x1
++			0x6800 0x0 0x0 0x4 &mpic 0x3 0x1
+ 
+ 			/* IDSEL 0x0e */
+-			7000 0 0 1 &mpic 3 1
+-			7000 0 0 2 &mpic 4 1
+-			7000 0 0 3 &mpic 1 1
+-			7000 0 0 4 &mpic 2 1
++			0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
++			0x7000 0x0 0x0 0x2 &mpic 0x4 0x1
++			0x7000 0x0 0x0 0x3 &mpic 0x1 0x1
++			0x7000 0x0 0x0 0x4 &mpic 0x2 0x1
+ 
+ 			/* IDSEL 0x0f */
+-			7800 0 0 1 &mpic 2 1
+-			7800 0 0 2 &mpic 3 1
+-			7800 0 0 3 &mpic 4 1
+-			7800 0 0 4 &mpic 1 1
++			0x7800 0x0 0x0 0x1 &mpic 0x2 0x1
++			0x7800 0x0 0x0 0x2 &mpic 0x3 0x1
++			0x7800 0x0 0x0 0x3 &mpic 0x4 0x1
++			0x7800 0x0 0x0 0x4 &mpic 0x1 0x1
+ 
+ 			/* IDSEL 0x12 */
+-			9000 0 0 1 &mpic 1 1
+-			9000 0 0 2 &mpic 2 1
+-			9000 0 0 3 &mpic 3 1
+-			9000 0 0 4 &mpic 4 1
++			0x9000 0x0 0x0 0x1 &mpic 0x1 0x1
++			0x9000 0x0 0x0 0x2 &mpic 0x2 0x1
++			0x9000 0x0 0x0 0x3 &mpic 0x3 0x1
++			0x9000 0x0 0x0 0x4 &mpic 0x4 0x1
+ 
+ 			/* IDSEL 0x13 */
+-			9800 0 0 1 &mpic 4 1
+-			9800 0 0 2 &mpic 1 1
+-			9800 0 0 3 &mpic 2 1
+-			9800 0 0 4 &mpic 3 1
++			0x9800 0x0 0x0 0x1 &mpic 0x4 0x1
++			0x9800 0x0 0x0 0x2 &mpic 0x1 0x1
++			0x9800 0x0 0x0 0x3 &mpic 0x2 0x1
++			0x9800 0x0 0x0 0x4 &mpic 0x3 0x1
+ 
+ 			/* IDSEL 0x14 */
+-			a000 0 0 1 &mpic 3 1
+-			a000 0 0 2 &mpic 4 1
+-			a000 0 0 3 &mpic 1 1
+-			a000 0 0 4 &mpic 2 1
++			0xa000 0x0 0x0 0x1 &mpic 0x3 0x1
++			0xa000 0x0 0x0 0x2 &mpic 0x4 0x1
++			0xa000 0x0 0x0 0x3 &mpic 0x1 0x1
++			0xa000 0x0 0x0 0x4 &mpic 0x2 0x1
+ 
+ 			/* IDSEL 0x15 */
+-			a800 0 0 1 &mpic 2 1
+-			a800 0 0 2 &mpic 3 1
+-			a800 0 0 3 &mpic 4 1
+-			a800 0 0 4 &mpic 1 1>;
++			0xa800 0x0 0x0 0x1 &mpic 0x2 0x1
++			0xa800 0x0 0x0 0x2 &mpic 0x3 0x1
++			0xa800 0x0 0x0 0x3 &mpic 0x4 0x1
++			0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>;
+ 		interrupt-parent = <&mpic>;
+-		interrupts = <18 2>;
++		interrupts = <24 2>;
+ 		bus-range = <0 0>;
+-		ranges = <02000000 0 80000000 80000000 0 20000000
+-			  01000000 0 00000000 e2000000 0 00100000>;
+-		clock-frequency = <3f940aa>;
++		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
++			  0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
++		clock-frequency = <66666666>;
+ 		#interrupt-cells = <1>;
+ 		#size-cells = <2>;
+ 		#address-cells = <3>;
+-		reg = <e0008000 1000>;
++		reg = <0xe0008000 0x1000>;
+ 		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+ 		device_type = "pci";
+ 	};
+--- a/arch/powerpc/boot/dts/mpc8541cds.dts
++++ b/arch/powerpc/boot/dts/mpc8541cds.dts
+@@ -1,7 +1,7 @@
+ /*
+  * MPC8541 CDS Device Tree Source
+  *
+- * Copyright 2006 Freescale Semiconductor Inc.
++ * Copyright 2006, 2008 Freescale Semiconductor Inc.
+  *
+  * This program is free software; you can redistribute  it and/or modify it
+  * under  the terms of  the GNU General  Public License as published by the
+@@ -9,6 +9,7 @@
+  * option) any later version.
+  */
+ 
++/dts-v1/;
+ 
+ / {
+ 	model = "MPC8541CDS";
+@@ -31,11 +32,11 @@
+ 
+ 		PowerPC,8541@0 {
+ 			device_type = "cpu";
+-			reg = <0>;
+-			d-cache-line-size = <20>;	// 32 bytes
+-			i-cache-line-size = <20>;	// 32 bytes
+-			d-cache-size = <8000>;		// L1, 32K
+-			i-cache-size = <8000>;		// L1, 32K
++			reg = <0x0>;
++			d-cache-line-size = <32>;	// 32 bytes
++			i-cache-line-size = <32>;	// 32 bytes
++			d-cache-size = <0x8000>;		// L1, 32K
++			i-cache-size = <0x8000>;		// L1, 32K
+ 			timebase-frequency = <0>;	//  33 MHz, from uboot
+ 			bus-frequency = <0>;	// 166 MHz
+ 			clock-frequency = <0>;	// 825 MHz, from uboot
+@@ -44,31 +45,31 @@
+ 
+ 	memory {
+ 		device_type = "memory";
+-		reg = <00000000 08000000>;	// 128M at 0x0
++		reg = <0x0 0x8000000>;	// 128M at 0x0
+ 	};
+ 
+ 	soc8541@e0000000 {
+ 		#address-cells = <1>;
+ 		#size-cells = <1>;
+ 		device_type = "soc";
+-		ranges = <0 e0000000 00100000>;
+-		reg = <e0000000 00001000>;	// CCSRBAR 1M
++		ranges = <0x0 0xe0000000 0x100000>;
++		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
+ 		bus-frequency = <0>;
+ 
+ 		memory-controller@2000 {
+ 			compatible = "fsl,8541-memory-controller";
+-			reg = <2000 1000>;
++			reg = <0x2000 0x1000>;
+ 			interrupt-parent = <&mpic>;
+-			interrupts = <12 2>;
++			interrupts = <18 2>;
+ 		};
+ 
+ 		l2-cache-controller@20000 {
+ 			compatible = "fsl,8541-l2-cache-controller";
+-			reg = <20000 1000>;
+-			cache-line-size = <20>;	// 32 bytes
+-			cache-size = <40000>;	// L2, 256K
++			reg = <0x20000 0x1000>;
++			cache-line-size = <32>;	// 32 bytes
++			cache-size = <0x40000>;	// L2, 256K
+ 			interrupt-parent = <&mpic>;
+-			interrupts = <10 2>;
++			interrupts = <16 2>;
+ 		};
+ 
+ 		i2c@3000 {
+@@ -76,8 +77,8 @@
+ 			#size-cells = <0>;
+ 			cell-index = <0>;
+ 			compatible = "fsl-i2c";
+-			reg = <3000 100>;
+-			interrupts = <2b 2>;
++			reg = <0x3000 0x100>;
++			interrupts = <43 2>;
+ 			interrupt-parent = <&mpic>;
+ 			dfsrr;
+ 		};
+@@ -86,18 +87,18 @@
+ 			#address-cells = <1>;
+ 			#size-cells = <0>;
+ 			compatible = "fsl,gianfar-mdio";
+-			reg = <24520 20>;
++			reg = <0x24520 0x20>;
+ 
+ 			phy0: ethernet-phy@0 {
+ 				interrupt-parent = <&mpic>;
+ 				interrupts = <5 1>;
+-				reg = <0>;
++				reg = <0x0>;
+ 				device_type = "ethernet-phy";
+ 			};
+ 			phy1: ethernet-phy@1 {
+ 				interrupt-parent = <&mpic>;
+ 				interrupts = <5 1>;
+-				reg = <1>;
++				reg = <0x1>;
+ 				device_type = "ethernet-phy";
+ 			};
+ 		};
+@@ -107,9 +108,9 @@
+ 			device_type = "network";
+ 			model = "TSEC";
+ 			compatible = "gianfar";
+-			reg = <24000 1000>;
++			reg = <0x24000 0x1000>;
+ 			local-mac-address = [ 00 00 00 00 00 00 ];
+-			interrupts = <1d 2 1e 2 22 2>;
++			interrupts = <29 2 30 2 34 2>;
+ 			interrupt-parent = <&mpic>;
+ 			phy-handle = <&phy0>;
+ 		};
+@@ -119,9 +120,9 @@
+ 			device_type = "network";
+ 			model = "TSEC";
+ 			compatible = "gianfar";
+-			reg = <25000 1000>;
++			reg = <0x25000 0x1000>;
+ 			local-mac-address = [ 00 00 00 00 00 00 ];
+-			interrupts = <23 2 24 2 28 2>;
++			interrupts = <35 2 36 2 40 2>;
+ 			interrupt-parent = <&mpic>;
+ 			phy-handle = <&phy1>;
+ 		};
+@@ -130,9 +131,9 @@
+ 			cell-index = <0>;
+ 			device_type = "serial";
+ 			compatible = "ns16550";
+-			reg = <4500 100>; 	// reg base, size
++			reg = <0x4500 0x100>; 	// reg base, size
+ 			clock-frequency = <0>; 	// should we fill in in uboot?
+-			interrupts = <2a 2>;
++			interrupts = <42 2>;
+ 			interrupt-parent = <&mpic>;
+ 		};
+ 
+@@ -140,9 +141,9 @@
+ 			cell-index = <1>;
+ 			device_type = "serial";
+ 			compatible = "ns16550";
+-			reg = <4600 100>;	// reg base, size
++			reg = <0x4600 0x100>;	// reg base, size
+ 			clock-frequency = <0>; 	// should we fill in in uboot?
+-			interrupts = <2a 2>;
++			interrupts = <42 2>;
+ 			interrupt-parent = <&mpic>;
+ 		};
+ 
+@@ -151,7 +152,7 @@
+ 			interrupt-controller;
+ 			#address-cells = <0>;
+ 			#interrupt-cells = <2>;
+-			reg = <40000 40000>;
++			reg = <0x40000 0x40000>;
+ 			compatible = "chrp,open-pic";
+ 			device_type = "open-pic";
+                         big-endian;
+@@ -161,17 +162,17 @@
+ 			#address-cells = <1>;
+ 			#size-cells = <1>;
+ 			compatible = "fsl,mpc8541-cpm", "fsl,cpm2";
+-			reg = <919c0 30>;
++			reg = <0x919c0 0x30>;
+ 			ranges;
+ 
+ 			muram@80000 {
+ 				#address-cells = <1>;
+ 				#size-cells = <1>;
+-				ranges = <0 80000 10000>;
++				ranges = <0x0 0x80000 0x10000>;
+ 
+ 				data@0 {
+ 					compatible = "fsl,cpm-muram-data";
+-					reg = <0 2000 9000 1000>;
++					reg = <0x0 0x2000 0x9000 0x1000>;
+ 				};
+ 			};
+ 
+@@ -179,16 +180,16 @@
+ 				compatible = "fsl,mpc8541-brg",
+ 				             "fsl,cpm2-brg",
+ 				             "fsl,cpm-brg";
+-				reg = <919f0 10 915f0 10>;
++				reg = <0x919f0 0x10 0x915f0 0x10>;
+ 			};
+ 
+ 			cpmpic: pic@90c00 {
+ 				interrupt-controller;
+ 				#address-cells = <0>;
+ 				#interrupt-cells = <2>;
+-				interrupts = <2e 2>;
++				interrupts = <46 2>;
+ 				interrupt-parent = <&mpic>;
+-				reg = <90c00 80>;
++				reg = <0x90c00 0x80>;
+ 				compatible = "fsl,mpc8541-cpm-pic", "fsl,cpm2-pic";
+ 			};
+ 		};
+@@ -196,68 +197,68 @@
+ 
+ 	pci0: pci@e0008000 {
+ 		cell-index = <0>;
+-		interrupt-map-mask = <1f800 0 0 7>;
++		interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
+ 		interrupt-map = <
+ 
+ 			/* IDSEL 0x10 */
+-			08000 0 0 1 &mpic 0 1
+-			08000 0 0 2 &mpic 1 1
+-			08000 0 0 3 &mpic 2 1
+-			08000 0 0 4 &mpic 3 1
++			0x8000 0x0 0x0 0x1 &mpic 0x0 0x1
++			0x8000 0x0 0x0 0x2 &mpic 0x1 0x1
++			0x8000 0x0 0x0 0x3 &mpic 0x2 0x1
++			0x8000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 
+ 			/* IDSEL 0x11 */
+-			08800 0 0 1 &mpic 0 1
+-			08800 0 0 2 &mpic 1 1
+-			08800 0 0 3 &mpic 2 1
+-			08800 0 0 4 &mpic 3 1
++			0x8800 0x0 0x0 0x1 &mpic 0x0 0x1
++			0x8800 0x0 0x0 0x2 &mpic 0x1 0x1
++			0x8800 0x0 0x0 0x3 &mpic 0x2 0x1
++			0x8800 0x0 0x0 0x4 &mpic 0x3 0x1
+ 
+ 			/* IDSEL 0x12 (Slot 1) */
+-			09000 0 0 1 &mpic 0 1
+-			09000 0 0 2 &mpic 1 1
+-			09000 0 0 3 &mpic 2 1
+-			09000 0 0 4 &mpic 3 1
++			0x9000 0x0 0x0 0x1 &mpic 0x0 0x1
++			0x9000 0x0 0x0 0x2 &mpic 0x1 0x1
++			0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
++			0x9000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 
+ 			/* IDSEL 0x13 (Slot 2) */
+-			09800 0 0 1 &mpic 1 1
+-			09800 0 0 2 &mpic 2 1
+-			09800 0 0 3 &mpic 3 1
+-			09800 0 0 4 &mpic 0 1
++			0x9800 0x0 0x0 0x1 &mpic 0x1 0x1
++			0x9800 0x0 0x0 0x2 &mpic 0x2 0x1
++			0x9800 0x0 0x0 0x3 &mpic 0x3 0x1
++			0x9800 0x0 0x0 0x4 &mpic 0x0 0x1
+ 
+ 			/* IDSEL 0x14 (Slot 3) */
+-			0a000 0 0 1 &mpic 2 1
+-			0a000 0 0 2 &mpic 3 1
+-			0a000 0 0 3 &mpic 0 1
+-			0a000 0 0 4 &mpic 1 1
++			0xa000 0x0 0x0 0x1 &mpic 0x2 0x1
++			0xa000 0x0 0x0 0x2 &mpic 0x3 0x1
++			0xa000 0x0 0x0 0x3 &mpic 0x0 0x1
++			0xa000 0x0 0x0 0x4 &mpic 0x1 0x1
+ 
+ 			/* IDSEL 0x15 (Slot 4) */
+-			0a800 0 0 1 &mpic 3 1
+-			0a800 0 0 2 &mpic 0 1
+-			0a800 0 0 3 &mpic 1 1
+-			0a800 0 0 4 &mpic 2 1
++			0xa800 0x0 0x0 0x1 &mpic 0x3 0x1
++			0xa800 0x0 0x0 0x2 &mpic 0x0 0x1
++			0xa800 0x0 0x0 0x3 &mpic 0x1 0x1
++			0xa800 0x0 0x0 0x4 &mpic 0x2 0x1
+ 
+ 			/* Bus 1 (Tundra Bridge) */
+ 			/* IDSEL 0x12 (ISA bridge) */
+-			19000 0 0 1 &mpic 0 1
+-			19000 0 0 2 &mpic 1 1
+-			19000 0 0 3 &mpic 2 1
+-			19000 0 0 4 &mpic 3 1>;
++			0x19000 0x0 0x0 0x1 &mpic 0x0 0x1
++			0x19000 0x0 0x0 0x2 &mpic 0x1 0x1
++			0x19000 0x0 0x0 0x3 &mpic 0x2 0x1
++			0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>;
+ 		interrupt-parent = <&mpic>;
+-		interrupts = <18 2>;
++		interrupts = <24 2>;
+ 		bus-range = <0 0>;
+-		ranges = <02000000 0 80000000 80000000 0 20000000
+-			  01000000 0 00000000 e2000000 0 00100000>;
+-		clock-frequency = <3f940aa>;
++		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
++			  0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
++		clock-frequency = <66666666>;
+ 		#interrupt-cells = <1>;
+ 		#size-cells = <2>;
+ 		#address-cells = <3>;
+-		reg = <e0008000 1000>;
++		reg = <0xe0008000 0x1000>;
+ 		compatible = "fsl,mpc8540-pci";
+ 		device_type = "pci";
+ 
+ 		i8259@19000 {
+ 			interrupt-controller;
+ 			device_type = "interrupt-controller";
+-			reg = <19000 0 0 0 1>;
++			reg = <0x19000 0x0 0x0 0x0 0x1>;
+ 			#address-cells = <0>;
+ 			#interrupt-cells = <2>;
+ 			compatible = "chrp,iic";
+@@ -268,24 +269,24 @@
+ 
+ 	pci1: pci@e0009000 {
+ 		cell-index = <1>;
+-		interrupt-map-mask = <f800 0 0 7>;
++		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ 		interrupt-map = <
+ 
+ 			/* IDSEL 0x15 */
+-			a800 0 0 1 &mpic b 1
+-			a800 0 0 2 &mpic b 1
+-			a800 0 0 3 &mpic b 1
+-			a800 0 0 4 &mpic b 1>;
++			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
++			0xa800 0x0 0x0 0x2 &mpic 0xb 0x1
++			0xa800 0x0 0x0 0x3 &mpic 0xb 0x1
++			0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>;
+ 		interrupt-parent = <&mpic>;
+-		interrupts = <19 2>;
++		interrupts = <25 2>;
+ 		bus-range = <0 0>;
+-		ranges = <02000000 0 a0000000 a0000000 0 20000000
+-			  01000000 0 00000000 e3000000 0 00100000>;
+-		clock-frequency = <3f940aa>;
++		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
++			  0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
++		clock-frequency = <66666666>;
+ 		#interrupt-cells = <1>;
+ 		#size-cells = <2>;
+ 		#address-cells = <3>;
+-		reg = <e0009000 1000>;
++		reg = <0xe0009000 0x1000>;
+ 		compatible = "fsl,mpc8540-pci";
+ 		device_type = "pci";
+ 	};
+--- a/arch/powerpc/boot/dts/mpc8544ds.dts
++++ b/arch/powerpc/boot/dts/mpc8544ds.dts
+@@ -1,7 +1,7 @@
+ /*
+  * MPC8544 DS Device Tree Source
+  *
+- * Copyright 2007 Freescale Semiconductor Inc.
++ * Copyright 2007, 2008 Freescale Semiconductor Inc.
+  *
+  * This program is free software; you can redistribute  it and/or modify it
+  * under  the terms of  the GNU General  Public License as published by the
+@@ -9,6 +9,7 @@
+  * option) any later version.
+  */
+ 
++/dts-v1/;
+ / {
+ 	model = "MPC8544DS";
+ 	compatible = "MPC8544DS", "MPC85xxDS";
+@@ -27,17 +28,16 @@
+ 	};
+ 
+ 	cpus {
+-		#cpus = <1>;
+ 		#address-cells = <1>;
+ 		#size-cells = <0>;
+ 
+ 		PowerPC,8544@0 {
+ 			device_type = "cpu";
+-			reg = <0>;
+-			d-cache-line-size = <20>;	// 32 bytes
+-			i-cache-line-size = <20>;	// 32 bytes
+-			d-cache-size = <8000>;		// L1, 32K
+-			i-cache-size = <8000>;		// L1, 32K
++			reg = <0x0>;
++			d-cache-line-size = <32>;	// 32 bytes
++			i-cache-line-size = <32>;	// 32 bytes
++			d-cache-size = <0x8000>;		// L1, 32K
++			i-cache-size = <0x8000>;		// L1, 32K
+ 			timebase-frequency = <0>;
+ 			bus-frequency = <0>;
+ 			clock-frequency = <0>;
+@@ -46,7 +46,7 @@
+ 
+ 	memory {
+ 		device_type = "memory";
+-		reg = <00000000 00000000>;	// Filled by U-Boot
++		reg = <0x0 0x0>;	// Filled by U-Boot
+ 	};
+ 
+ 	soc8544@e0000000 {
+@@ -54,24 +54,24 @@
+ 		#size-cells = <1>;
+ 		device_type = "soc";
+ 
+-		ranges = <00000000 e0000000 00100000>;
+-		reg = <e0000000 00001000>;	// CCSRBAR 1M
++		ranges = <0x0 0xe0000000 0x100000>;
++		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
+ 		bus-frequency = <0>;		// Filled out by uboot.
+ 
+ 		memory-controller@2000 {
+ 			compatible = "fsl,8544-memory-controller";
+-			reg = <2000 1000>;
++			reg = <0x2000 0x1000>;
+ 			interrupt-parent = <&mpic>;
+-			interrupts = <12 2>;
++			interrupts = <18 2>;
+ 		};
+ 
+ 		l2-cache-controller@20000 {
+ 			compatible = "fsl,8544-l2-cache-controller";
+-			reg = <20000 1000>;
+-			cache-line-size = <20>;	// 32 bytes
+-			cache-size = <40000>;	// L2, 256K
++			reg = <0x20000 0x1000>;
++			cache-line-size = <32>;	// 32 bytes
++			cache-size = <0x40000>;	// L2, 256K
+ 			interrupt-parent = <&mpic>;
+-			interrupts = <10 2>;
++			interrupts = <16 2>;
+ 		};
+ 
+ 		i2c@3000 {
+@@ -79,8 +79,8 @@
+ 			#size-cells = <0>;
+ 			cell-index = <0>;
+ 			compatible = "fsl-i2c";
+-			reg = <3000 100>;
+-			interrupts = <2b 2>;
++			reg = <0x3000 0x100>;
++			interrupts = <43 2>;
+ 			interrupt-parent = <&mpic>;
+ 			dfsrr;
+ 		};
+@@ -90,8 +90,8 @@
+ 			#size-cells = <0>;
+ 			cell-index = <1>;
+ 			compatible = "fsl-i2c";
+-			reg = <3100 100>;
+-			interrupts = <2b 2>;
++			reg = <0x3100 0x100>;
++			interrupts = <43 2>;
+ 			interrupt-parent = <&mpic>;
+ 			dfsrr;
+ 		};
+@@ -100,30 +100,71 @@
+ 			#address-cells = <1>;
+ 			#size-cells = <0>;
+ 			compatible = "fsl,gianfar-mdio";
+-			reg = <24520 20>;
++			reg = <0x24520 0x20>;
+ 
+ 			phy0: ethernet-phy@0 {
+ 				interrupt-parent = <&mpic>;
+-				interrupts = <a 1>;
+-				reg = <0>;
++				interrupts = <10 1>;
++				reg = <0x0>;
+ 				device_type = "ethernet-phy";
+ 			};
+ 			phy1: ethernet-phy@1 {
+ 				interrupt-parent = <&mpic>;
+-				interrupts = <a 1>;
+-				reg = <1>;
++				interrupts = <10 1>;
++				reg = <0x1>;
+ 				device_type = "ethernet-phy";
+ 			};
+ 		};
+ 
++		dma@21300 {
++			#address-cells = <1>;
++			#size-cells = <1>;
++			compatible = "fsl,mpc8544-dma", "fsl,eloplus-dma";
++			reg = <0x21300 0x4>;
++			ranges = <0x0 0x21100 0x200>;
++			cell-index = <0>;
++			dma-channel@0 {
++				compatible = "fsl,mpc8544-dma-channel",
++						"fsl,eloplus-dma-channel";
++				reg = <0x0 0x80>;
++				cell-index = <0>;
++				interrupt-parent = <&mpic>;
++				interrupts = <20 2>;
++			};
++			dma-channel@80 {
++				compatible = "fsl,mpc8544-dma-channel",
++						"fsl,eloplus-dma-channel";
++				reg = <0x80 0x80>;
++				cell-index = <1>;
++				interrupt-parent = <&mpic>;
++				interrupts = <21 2>;
++			};
++			dma-channel@100 {
++				compatible = "fsl,mpc8544-dma-channel",
++						"fsl,eloplus-dma-channel";
++				reg = <0x100 0x80>;
++				cell-index = <2>;
++				interrupt-parent = <&mpic>;
++				interrupts = <22 2>;
++			};
++			dma-channel@180 {
++				compatible = "fsl,mpc8544-dma-channel",
++						"fsl,eloplus-dma-channel";
++				reg = <0x180 0x80>;
++				cell-index = <3>;
++				interrupt-parent = <&mpic>;
++				interrupts = <23 2>;
++			};
++		};
++
+ 		enet0: ethernet@24000 {
+ 			cell-index = <0>;
+ 			device_type = "network";
+ 			model = "TSEC";
+ 			compatible = "gianfar";
+-			reg = <24000 1000>;
++			reg = <0x24000 0x1000>;
+ 			local-mac-address = [ 00 00 00 00 00 00 ];
+-			interrupts = <1d 2 1e 2 22 2>;
++			interrupts = <29 2 30 2 34 2>;
+ 			interrupt-parent = <&mpic>;
+ 			phy-handle = <&phy0>;
+ 			phy-connection-type = "rgmii-id";
+@@ -134,9 +175,9 @@
+ 			device_type = "network";
+ 			model = "TSEC";
+ 			compatible = "gianfar";
+-			reg = <26000 1000>;
++			reg = <0x26000 0x1000>;
+ 			local-mac-address = [ 00 00 00 00 00 00 ];
+-			interrupts = <1f 2 20 2 21 2>;
++			interrupts = <31 2 32 2 33 2>;
+ 			interrupt-parent = <&mpic>;
+ 			phy-handle = <&phy1>;
+ 			phy-connection-type = "rgmii-id";
+@@ -146,9 +187,9 @@
+ 			cell-index = <0>;
+ 			device_type = "serial";
+ 			compatible = "ns16550";
+-			reg = <4500 100>;
++			reg = <0x4500 0x100>;
+ 			clock-frequency = <0>;
+-			interrupts = <2a 2>;
++			interrupts = <42 2>;
+ 			interrupt-parent = <&mpic>;
+ 		};
+ 
+@@ -156,15 +197,15 @@
+ 			cell-index = <1>;
+ 			device_type = "serial";
+ 			compatible = "ns16550";
+-			reg = <4600 100>;
++			reg = <0x4600 0x100>;
+ 			clock-frequency = <0>;
+-			interrupts = <2a 2>;
++			interrupts = <42 2>;
+ 			interrupt-parent = <&mpic>;
+ 		};
+ 
+ 		global-utilities@e0000 {	//global utilities block
+ 			compatible = "fsl,mpc8548-guts";
+-			reg = <e0000 1000>;
++			reg = <0xe0000 0x1000>;
+ 			fsl,has-rstcr;
+ 		};
+ 
+@@ -173,7 +214,7 @@
+ 			interrupt-controller;
+ 			#address-cells = <0>;
+ 			#interrupt-cells = <2>;
+-			reg = <40000 40000>;
++			reg = <0x40000 0x40000>;
+ 			compatible = "chrp,open-pic";
+ 			device_type = "open-pic";
+ 			big-endian;
+@@ -184,32 +225,32 @@
+ 		cell-index = <0>;
+ 		compatible = "fsl,mpc8540-pci";
+ 		device_type = "pci";
+-		interrupt-map-mask = <f800 0 0 7>;
++		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ 		interrupt-map = <
+ 
+ 			/* IDSEL 0x11 J17 Slot 1 */
+-			8800 0 0 1 &mpic 2 1
+-			8800 0 0 2 &mpic 3 1
+-			8800 0 0 3 &mpic 4 1
+-			8800 0 0 4 &mpic 1 1
++			0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
++			0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
++			0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
++			0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
+ 
+ 			/* IDSEL 0x12 J16 Slot 2 */
+ 
+-			9000 0 0 1 &mpic 3 1
+-			9000 0 0 2 &mpic 4 1
+-			9000 0 0 3 &mpic 2 1
+-			9000 0 0 4 &mpic 1 1>;
++			0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
++			0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
++			0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
++			0x9000 0x0 0x0 0x4 &mpic 0x1 0x1>;
+ 
+ 		interrupt-parent = <&mpic>;
+-		interrupts = <18 2>;
+-		bus-range = <0 ff>;
+-		ranges = <02000000 0 c0000000 c0000000 0 20000000
+-			  01000000 0 00000000 e1000000 0 00010000>;
+-		clock-frequency = <3f940aa>;
++		interrupts = <24 2>;
++		bus-range = <0 255>;
++		ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
++			  0x1000000 0x0 0x0 0xe1000000 0x0 0x10000>;
++		clock-frequency = <66666666>;
+ 		#interrupt-cells = <1>;
+ 		#size-cells = <2>;
+ 		#address-cells = <3>;
+-		reg = <e0008000 1000>;
++		reg = <0xe0008000 0x1000>;
+ 	};
+ 
+ 	pci1: pcie@e0009000 {
+@@ -219,33 +260,33 @@
+ 		#interrupt-cells = <1>;
+ 		#size-cells = <2>;
+ 		#address-cells = <3>;
+-		reg = <e0009000 1000>;
+-		bus-range = <0 ff>;
+-		ranges = <02000000 0 80000000 80000000 0 20000000
+-			  01000000 0 00000000 e1010000 0 00010000>;
+-		clock-frequency = <1fca055>;
++		reg = <0xe0009000 0x1000>;
++		bus-range = <0 255>;
++		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
++			  0x1000000 0x0 0x0 0xe1010000 0x0 0x10000>;
++		clock-frequency = <33333333>;
+ 		interrupt-parent = <&mpic>;
+-		interrupts = <1a 2>;
+-		interrupt-map-mask = <f800 0 0 7>;
++		interrupts = <26 2>;
++		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ 		interrupt-map = <
+ 			/* IDSEL 0x0 */
+-			0000 0 0 1 &mpic 4 1
+-			0000 0 0 2 &mpic 5 1
+-			0000 0 0 3 &mpic 6 1
+-			0000 0 0 4 &mpic 7 1
++			0000 0x0 0x0 0x1 &mpic 0x4 0x1
++			0000 0x0 0x0 0x2 &mpic 0x5 0x1
++			0000 0x0 0x0 0x3 &mpic 0x6 0x1
++			0000 0x0 0x0 0x4 &mpic 0x7 0x1
+ 			>;
+ 		pcie@0 {
+-			reg = <0 0 0 0 0>;
++			reg = <0x0 0x0 0x0 0x0 0x0>;
+ 			#size-cells = <2>;
+ 			#address-cells = <3>;
+ 			device_type = "pci";
+-			ranges = <02000000 0 80000000
+-				  02000000 0 80000000
+-				  0 20000000
+-
+-				  01000000 0 00000000
+-				  01000000 0 00000000
+-				  0 00010000>;
++			ranges = <0x2000000 0x0 0x80000000
++				  0x2000000 0x0 0x80000000
++				  0x0 0x20000000
++
++				  0x1000000 0x0 0x0
++				  0x1000000 0x0 0x0
++				  0x0 0x10000>;
+ 		};
+ 	};
+ 
+@@ -256,33 +297,33 @@
+ 		#interrupt-cells = <1>;
+ 		#size-cells = <2>;
+ 		#address-cells = <3>;
+-		reg = <e000a000 1000>;
+-		bus-range = <0 ff>;
+-		ranges = <02000000 0 a0000000 a0000000 0 10000000
+-			  01000000 0 00000000 e1020000 0 00010000>;
+-		clock-frequency = <1fca055>;
++		reg = <0xe000a000 0x1000>;
++		bus-range = <0 255>;
++		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
++			  0x1000000 0x0 0x0 0xe1020000 0x0 0x10000>;
++		clock-frequency = <33333333>;
+ 		interrupt-parent = <&mpic>;
+-		interrupts = <19 2>;
+-		interrupt-map-mask = <f800 0 0 7>;
++		interrupts = <25 2>;
++		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ 		interrupt-map = <
+ 			/* IDSEL 0x0 */
+-			0000 0 0 1 &mpic 0 1
+-			0000 0 0 2 &mpic 1 1
+-			0000 0 0 3 &mpic 2 1
+-			0000 0 0 4 &mpic 3 1
++			0000 0x0 0x0 0x1 &mpic 0x0 0x1
++			0000 0x0 0x0 0x2 &mpic 0x1 0x1
++			0000 0x0 0x0 0x3 &mpic 0x2 0x1
++			0000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 			>;
+ 		pcie@0 {
+-			reg = <0 0 0 0 0>;
++			reg = <0x0 0x0 0x0 0x0 0x0>;
+ 			#size-cells = <2>;
+ 			#address-cells = <3>;
+ 			device_type = "pci";
+-			ranges = <02000000 0 a0000000
+-				  02000000 0 a0000000
+-				  0 10000000
+-
+-				  01000000 0 00000000
+-				  01000000 0 00000000
+-				  0 00010000>;
++			ranges = <0x2000000 0x0 0xa0000000
++				  0x2000000 0x0 0xa0000000
++				  0x0 0x10000000
++
++				  0x1000000 0x0 0x0
++				  0x1000000 0x0 0x0
++				  0x0 0x10000>;
+ 		};
+ 	};
+ 
+@@ -293,72 +334,72 @@
+ 		#interrupt-cells = <1>;
+ 		#size-cells = <2>;
+ 		#address-cells = <3>;
+-		reg = <e000b000 1000>;
+-		bus-range = <0 ff>;
+-		ranges = <02000000 0 b0000000 b0000000 0 00100000
+-			  01000000 0 00000000 b0100000 0 00100000>;
+-		clock-frequency = <1fca055>;
++		reg = <0xe000b000 0x1000>;
++		bus-range = <0 255>;
++		ranges = <0x2000000 0x0 0xb0000000 0xb0000000 0x0 0x100000
++			  0x1000000 0x0 0x0 0xb0100000 0x0 0x100000>;
++		clock-frequency = <33333333>;
+ 		interrupt-parent = <&mpic>;
+-		interrupts = <1b 2>;
+-		interrupt-map-mask = <ff00 0 0 1>;
++		interrupts = <27 2>;
++		interrupt-map-mask = <0xff00 0x0 0x0 0x1>;
+ 		interrupt-map = <
+ 			// IDSEL 0x1c  USB
+-			e000 0 0 1 &i8259 c 2
+-			e100 0 0 2 &i8259 9 2
+-			e200 0 0 3 &i8259 a 2
+-			e300 0 0 4 &i8259 b 2
++			0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
++			0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
++			0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
++			0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
+ 
+ 			// IDSEL 0x1d  Audio
+-			e800 0 0 1 &i8259 6 2
++			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+ 
+ 			// IDSEL 0x1e Legacy
+-			f000 0 0 1 &i8259 7 2
+-			f100 0 0 1 &i8259 7 2
++			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
++			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+ 
+ 			// IDSEL 0x1f IDE/SATA
+-			f800 0 0 1 &i8259 e 2
+-			f900 0 0 1 &i8259 5 2
++			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
++			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+ 		>;
+ 
+ 		pcie@0 {
+-			reg = <0 0 0 0 0>;
++			reg = <0x0 0x0 0x0 0x0 0x0>;
+ 			#size-cells = <2>;
+ 			#address-cells = <3>;
+ 			device_type = "pci";
+-			ranges = <02000000 0 b0000000
+-				  02000000 0 b0000000
+-				  0 00100000
+-
+-				  01000000 0 00000000
+-				  01000000 0 00000000
+-				  0 00100000>;
++			ranges = <0x2000000 0x0 0xb0000000
++				  0x2000000 0x0 0xb0000000
++				  0x0 0x100000
++
++				  0x1000000 0x0 0x0
++				  0x1000000 0x0 0x0
++				  0x0 0x100000>;
+ 
+ 			uli1575@0 {
+-				reg = <0 0 0 0 0>;
++				reg = <0x0 0x0 0x0 0x0 0x0>;
+ 				#size-cells = <2>;
+ 				#address-cells = <3>;
+-				ranges = <02000000 0 b0000000
+-					  02000000 0 b0000000
+-					  0 00100000
+-
+-					  01000000 0 00000000
+-					  01000000 0 00000000
+-					  0 00100000>;
++				ranges = <0x2000000 0x0 0xb0000000
++					  0x2000000 0x0 0xb0000000
++					  0x0 0x100000
++
++					  0x1000000 0x0 0x0
++					  0x1000000 0x0 0x0
++					  0x0 0x100000>;
+ 				isa@1e {
+ 					device_type = "isa";
+ 					#interrupt-cells = <2>;
+ 					#size-cells = <1>;
+ 					#address-cells = <2>;
+-					reg = <f000 0 0 0 0>;
+-					ranges = <1 0
+-						  01000000 0 0
+-						  00001000>;
++					reg = <0xf000 0x0 0x0 0x0 0x0>;
++					ranges = <0x1 0x0
++						  0x1000000 0x0 0x0
++						  0x1000>;
+ 					interrupt-parent = <&i8259>;
+ 
+ 					i8259: interrupt-controller@20 {
+-						reg = <1 20 2
+-						       1 a0 2
+-						       1 4d0 2>;
++						reg = <0x1 0x20 0x2
++						       0x1 0xa0 0x2
++						       0x1 0x4d0 0x2>;
+ 						interrupt-controller;
+ 						device_type = "interrupt-controller";
+ 						#address-cells = <0>;
+@@ -371,28 +412,28 @@
+ 					i8042@60 {
+ 						#size-cells = <0>;
+ 						#address-cells = <1>;
+-						reg = <1 60 1 1 64 1>;
+-						interrupts = <1 3 c 3>;
++						reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
++						interrupts = <1 3 12 3>;
+ 						interrupt-parent = <&i8259>;
+ 
+ 						keyboard@0 {
+-							reg = <0>;
++							reg = <0x0>;
+ 							compatible = "pnpPNP,303";
+ 						};
+ 
+ 						mouse@1 {
+-							reg = <1>;
++							reg = <0x1>;
+ 							compatible = "pnpPNP,f03";
+ 						};
+ 					};
+ 
+ 					rtc@70 {
+ 						compatible = "pnpPNP,b00";
+-						reg = <1 70 2>;
++						reg = <0x1 0x70 0x2>;
+ 					};
+ 
+ 					gpio@400 {
+-						reg = <1 400 80>;
++						reg = <0x1 0x400 0x80>;
+ 					};
+ 				};
+ 			};
+--- a/arch/powerpc/boot/dts/mpc8548cds.dts
++++ b/arch/powerpc/boot/dts/mpc8548cds.dts
+@@ -1,7 +1,7 @@
+ /*
+  * MPC8548 CDS Device Tree Source
+  *
+- * Copyright 2006 Freescale Semiconductor Inc.
++ * Copyright 2006, 2008 Freescale Semiconductor Inc.
+  *
+  * This program is free software; you can redistribute  it and/or modify it
+  * under  the terms of  the GNU General  Public License as published by the
+@@ -9,6 +9,7 @@
+  * option) any later version.
+  */
+ 
++/dts-v1/;
+ 
+ / {
+ 	model = "MPC8548CDS";
+@@ -36,11 +37,11 @@
+ 
+ 		PowerPC,8548@0 {
+ 			device_type = "cpu";
+-			reg = <0>;
+-			d-cache-line-size = <20>;	// 32 bytes
+-			i-cache-line-size = <20>;	// 32 bytes
+-			d-cache-size = <8000>;		// L1, 32K
+-			i-cache-size = <8000>;		// L1, 32K
++			reg = <0x0>;
++			d-cache-line-size = <32>;	// 32 bytes
++			i-cache-line-size = <32>;	// 32 bytes
++			d-cache-size = <0x8000>;		// L1, 32K
++			i-cache-size = <0x8000>;		// L1, 32K
+ 			timebase-frequency = <0>;	//  33 MHz, from uboot
+ 			bus-frequency = <0>;	// 166 MHz
+ 			clock-frequency = <0>;	// 825 MHz, from uboot
+@@ -49,31 +50,31 @@
+ 
+ 	memory {
+ 		device_type = "memory";
+-		reg = <00000000 08000000>;	// 128M at 0x0
++		reg = <0x0 0x8000000>;	// 128M at 0x0
+ 	};
+ 
+ 	soc8548@e0000000 {
+ 		#address-cells = <1>;
+ 		#size-cells = <1>;
+ 		device_type = "soc";
+-		ranges = <00000000 e0000000 00100000>;
+-		reg = <e0000000 00001000>;	// CCSRBAR
++		ranges = <0x0 0xe0000000 0x100000>;
++		reg = <0xe0000000 0x1000>;	// CCSRBAR
+ 		bus-frequency = <0>;
+ 
+ 		memory-controller@2000 {
+ 			compatible = "fsl,8548-memory-controller";
+-			reg = <2000 1000>;
++			reg = <0x2000 0x1000>;
+ 			interrupt-parent = <&mpic>;
+-			interrupts = <12 2>;
++			interrupts = <18 2>;
+ 		};
+ 
+ 		l2-cache-controller@20000 {
+ 			compatible = "fsl,8548-l2-cache-controller";
+-			reg = <20000 1000>;
+-			cache-line-size = <20>;	// 32 bytes
+-			cache-size = <80000>;	// L2, 512K
++			reg = <0x20000 0x1000>;
++			cache-line-size = <32>;	// 32 bytes
++			cache-size = <0x80000>;	// L2, 512K
+ 			interrupt-parent = <&mpic>;
+-			interrupts = <10 2>;
++			interrupts = <16 2>;
+ 		};
+ 
+ 		i2c@3000 {
+@@ -81,8 +82,8 @@
+ 			#size-cells = <0>;
+ 			cell-index = <0>;
+ 			compatible = "fsl-i2c";
+-			reg = <3000 100>;
+-			interrupts = <2b 2>;
++			reg = <0x3000 0x100>;
++			interrupts = <43 2>;
+ 			interrupt-parent = <&mpic>;
+ 			dfsrr;
+ 		};
+@@ -92,8 +93,8 @@
+ 			#size-cells = <0>;
+ 			cell-index = <1>;
+ 			compatible = "fsl-i2c";
+-			reg = <3100 100>;
+-			interrupts = <2b 2>;
++			reg = <0x3100 0x100>;
++			interrupts = <43 2>;
+ 			interrupt-parent = <&mpic>;
+ 			dfsrr;
+ 		};
+@@ -102,30 +103,30 @@
+ 			#address-cells = <1>;
+ 			#size-cells = <0>;
+ 			compatible = "fsl,gianfar-mdio";
+-			reg = <24520 20>;
++			reg = <0x24520 0x20>;
+ 
+ 			phy0: ethernet-phy@0 {
+ 				interrupt-parent = <&mpic>;
+ 				interrupts = <5 1>;
+-				reg = <0>;
++				reg = <0x0>;
+ 				device_type = "ethernet-phy";
+ 			};
+ 			phy1: ethernet-phy@1 {
+ 				interrupt-parent = <&mpic>;
+ 				interrupts = <5 1>;
+-				reg = <1>;
++				reg = <0x1>;
+ 				device_type = "ethernet-phy";
+ 			};
+ 			phy2: ethernet-phy@2 {
+ 				interrupt-parent = <&mpic>;
+ 				interrupts = <5 1>;
+-				reg = <2>;
++				reg = <0x2>;
+ 				device_type = "ethernet-phy";
+ 			};
+ 			phy3: ethernet-phy@3 {
+ 				interrupt-parent = <&mpic>;
+ 				interrupts = <5 1>;
+-				reg = <3>;
++				reg = <0x3>;
+ 				device_type = "ethernet-phy";
+ 			};
+ 		};
+@@ -135,9 +136,9 @@
+ 			device_type = "network";
+ 			model = "eTSEC";
+ 			compatible = "gianfar";
+-			reg = <24000 1000>;
++			reg = <0x24000 0x1000>;
+ 			local-mac-address = [ 00 00 00 00 00 00 ];
+-			interrupts = <1d 2 1e 2 22 2>;
++			interrupts = <29 2 30 2 34 2>;
+ 			interrupt-parent = <&mpic>;
+ 			phy-handle = <&phy0>;
+ 		};
+@@ -147,9 +148,9 @@
+ 			device_type = "network";
+ 			model = "eTSEC";
+ 			compatible = "gianfar";
+-			reg = <25000 1000>;
++			reg = <0x25000 0x1000>;
+ 			local-mac-address = [ 00 00 00 00 00 00 ];
+-			interrupts = <23 2 24 2 28 2>;
++			interrupts = <35 2 36 2 40 2>;
+ 			interrupt-parent = <&mpic>;
+ 			phy-handle = <&phy1>;
+ 		};
+@@ -160,9 +161,9 @@
+ 			device_type = "network";
+ 			model = "eTSEC";
+ 			compatible = "gianfar";
+-			reg = <26000 1000>;
++			reg = <0x26000 0x1000>;
+ 			local-mac-address = [ 00 00 00 00 00 00 ];
+-			interrupts = <1f 2 20 2 21 2>;
++			interrupts = <31 2 32 2 33 2>;
+ 			interrupt-parent = <&mpic>;
+ 			phy-handle = <&phy2>;
+ 		};
+@@ -172,9 +173,9 @@
+ 			device_type = "network";
+ 			model = "eTSEC";
+ 			compatible = "gianfar";
+-			reg = <27000 1000>;
++			reg = <0x27000 0x1000>;
+ 			local-mac-address = [ 00 00 00 00 00 00 ];
+-			interrupts = <25 2 26 2 27 2>;
++			interrupts = <37 2 38 2 39 2>;
+ 			interrupt-parent = <&mpic>;
+ 			phy-handle = <&phy3>;
+ 		};
+@@ -184,9 +185,9 @@
+ 			cell-index = <0>;
+ 			device_type = "serial";
+ 			compatible = "ns16550";
+-			reg = <4500 100>;	// reg base, size
++			reg = <0x4500 0x100>;	// reg base, size
+ 			clock-frequency = <0>;	// should we fill in in uboot?
+-			interrupts = <2a 2>;
++			interrupts = <42 2>;
+ 			interrupt-parent = <&mpic>;
+ 		};
+ 
+@@ -194,15 +195,15 @@
+ 			cell-index = <1>;
+ 			device_type = "serial";
+ 			compatible = "ns16550";
+-			reg = <4600 100>;	// reg base, size
++			reg = <0x4600 0x100>;	// reg base, size
+ 			clock-frequency = <0>;	// should we fill in in uboot?
+-			interrupts = <2a 2>;
++			interrupts = <42 2>;
+ 			interrupt-parent = <&mpic>;
+ 		};
+ 
+ 		global-utilities@e0000 {	//global utilities reg
+ 			compatible = "fsl,mpc8548-guts";
+-			reg = <e0000 1000>;
++			reg = <0xe0000 0x1000>;
+ 			fsl,has-rstcr;
+ 		};
+ 
+@@ -211,7 +212,7 @@
+ 			interrupt-controller;
+ 			#address-cells = <0>;
+ 			#interrupt-cells = <2>;
+-			reg = <40000 40000>;
++			reg = <0x40000 0x40000>;
+ 			compatible = "chrp,open-pic";
+ 			device_type = "open-pic";
+                         big-endian;
+@@ -220,139 +221,139 @@
+ 
+ 	pci0: pci@e0008000 {
+ 		cell-index = <0>;
+-		interrupt-map-mask = <f800 0 0 7>;
++		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ 		interrupt-map = <
+ 			/* IDSEL 0x4 (PCIX Slot 2) */
+-			02000 0 0 1 &mpic 0 1
+-			02000 0 0 2 &mpic 1 1
+-			02000 0 0 3 &mpic 2 1
+-			02000 0 0 4 &mpic 3 1
++			0x2000 0x0 0x0 0x1 &mpic 0x0 0x1
++			0x2000 0x0 0x0 0x2 &mpic 0x1 0x1
++			0x2000 0x0 0x0 0x3 &mpic 0x2 0x1
++			0x2000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 
+ 			/* IDSEL 0x5 (PCIX Slot 3) */
+-			02800 0 0 1 &mpic 1 1
+-			02800 0 0 2 &mpic 2 1
+-			02800 0 0 3 &mpic 3 1
+-			02800 0 0 4 &mpic 0 1
++			0x2800 0x0 0x0 0x1 &mpic 0x1 0x1
++			0x2800 0x0 0x0 0x2 &mpic 0x2 0x1
++			0x2800 0x0 0x0 0x3 &mpic 0x3 0x1
++			0x2800 0x0 0x0 0x4 &mpic 0x0 0x1
+ 
+ 			/* IDSEL 0x6 (PCIX Slot 4) */
+-			03000 0 0 1 &mpic 2 1
+-			03000 0 0 2 &mpic 3 1
+-			03000 0 0 3 &mpic 0 1
+-			03000 0 0 4 &mpic 1 1
++			0x3000 0x0 0x0 0x1 &mpic 0x2 0x1
++			0x3000 0x0 0x0 0x2 &mpic 0x3 0x1
++			0x3000 0x0 0x0 0x3 &mpic 0x0 0x1
++			0x3000 0x0 0x0 0x4 &mpic 0x1 0x1
+ 
+ 			/* IDSEL 0x8 (PCIX Slot 5) */
+-			04000 0 0 1 &mpic 0 1
+-			04000 0 0 2 &mpic 1 1
+-			04000 0 0 3 &mpic 2 1
+-			04000 0 0 4 &mpic 3 1
++			0x4000 0x0 0x0 0x1 &mpic 0x0 0x1
++			0x4000 0x0 0x0 0x2 &mpic 0x1 0x1
++			0x4000 0x0 0x0 0x3 &mpic 0x2 0x1
++			0x4000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 
+ 			/* IDSEL 0xC (Tsi310 bridge) */
+-			06000 0 0 1 &mpic 0 1
+-			06000 0 0 2 &mpic 1 1
+-			06000 0 0 3 &mpic 2 1
+-			06000 0 0 4 &mpic 3 1
++			0x6000 0x0 0x0 0x1 &mpic 0x0 0x1
++			0x6000 0x0 0x0 0x2 &mpic 0x1 0x1
++			0x6000 0x0 0x0 0x3 &mpic 0x2 0x1
++			0x6000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 
+ 			/* IDSEL 0x14 (Slot 2) */
+-			0a000 0 0 1 &mpic 0 1
+-			0a000 0 0 2 &mpic 1 1
+-			0a000 0 0 3 &mpic 2 1
+-			0a000 0 0 4 &mpic 3 1
++			0xa000 0x0 0x0 0x1 &mpic 0x0 0x1
++			0xa000 0x0 0x0 0x2 &mpic 0x1 0x1
++			0xa000 0x0 0x0 0x3 &mpic 0x2 0x1
++			0xa000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 
+ 			/* IDSEL 0x15 (Slot 3) */
+-			0a800 0 0 1 &mpic 1 1
+-			0a800 0 0 2 &mpic 2 1
+-			0a800 0 0 3 &mpic 3 1
+-			0a800 0 0 4 &mpic 0 1
++			0xa800 0x0 0x0 0x1 &mpic 0x1 0x1
++			0xa800 0x0 0x0 0x2 &mpic 0x2 0x1
++			0xa800 0x0 0x0 0x3 &mpic 0x3 0x1
++			0xa800 0x0 0x0 0x4 &mpic 0x0 0x1
+ 
+ 			/* IDSEL 0x16 (Slot 4) */
+-			0b000 0 0 1 &mpic 2 1
+-			0b000 0 0 2 &mpic 3 1
+-			0b000 0 0 3 &mpic 0 1
+-			0b000 0 0 4 &mpic 1 1
++			0xb000 0x0 0x0 0x1 &mpic 0x2 0x1
++			0xb000 0x0 0x0 0x2 &mpic 0x3 0x1
++			0xb000 0x0 0x0 0x3 &mpic 0x0 0x1
++			0xb000 0x0 0x0 0x4 &mpic 0x1 0x1
+ 
+ 			/* IDSEL 0x18 (Slot 5) */
+-			0c000 0 0 1 &mpic 0 1
+-			0c000 0 0 2 &mpic 1 1
+-			0c000 0 0 3 &mpic 2 1
+-			0c000 0 0 4 &mpic 3 1
++			0xc000 0x0 0x0 0x1 &mpic 0x0 0x1
++			0xc000 0x0 0x0 0x2 &mpic 0x1 0x1
++			0xc000 0x0 0x0 0x3 &mpic 0x2 0x1
++			0xc000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 
+ 			/* IDSEL 0x1C (Tsi310 bridge PCI primary) */
+-			0E000 0 0 1 &mpic 0 1
+-			0E000 0 0 2 &mpic 1 1
+-			0E000 0 0 3 &mpic 2 1
+-			0E000 0 0 4 &mpic 3 1>;
++			0xe000 0x0 0x0 0x1 &mpic 0x0 0x1
++			0xe000 0x0 0x0 0x2 &mpic 0x1 0x1
++			0xe000 0x0 0x0 0x3 &mpic 0x2 0x1
++			0xe000 0x0 0x0 0x4 &mpic 0x3 0x1>;
+ 
+ 		interrupt-parent = <&mpic>;
+-		interrupts = <18 2>;
++		interrupts = <24 2>;
+ 		bus-range = <0 0>;
+-		ranges = <02000000 0 80000000 80000000 0 10000000
+-			  01000000 0 00000000 e2000000 0 00800000>;
+-		clock-frequency = <3f940aa>;
++		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x10000000
++			  0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
++		clock-frequency = <66666666>;
+ 		#interrupt-cells = <1>;
+ 		#size-cells = <2>;
+ 		#address-cells = <3>;
+-		reg = <e0008000 1000>;
++		reg = <0xe0008000 0x1000>;
+ 		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+ 		device_type = "pci";
+ 
+ 		pci_bridge@1c {
+-			interrupt-map-mask = <f800 0 0 7>;
++			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ 			interrupt-map = <
+ 
+ 				/* IDSEL 0x00 (PrPMC Site) */
+-				0000 0 0 1 &mpic 0 1
+-				0000 0 0 2 &mpic 1 1
+-				0000 0 0 3 &mpic 2 1
+-				0000 0 0 4 &mpic 3 1
++				0000 0x0 0x0 0x1 &mpic 0x0 0x1
++				0000 0x0 0x0 0x2 &mpic 0x1 0x1
++				0000 0x0 0x0 0x3 &mpic 0x2 0x1
++				0000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 
+ 				/* IDSEL 0x04 (VIA chip) */
+-				2000 0 0 1 &mpic 0 1
+-				2000 0 0 2 &mpic 1 1
+-				2000 0 0 3 &mpic 2 1
+-				2000 0 0 4 &mpic 3 1
++				0x2000 0x0 0x0 0x1 &mpic 0x0 0x1
++				0x2000 0x0 0x0 0x2 &mpic 0x1 0x1
++				0x2000 0x0 0x0 0x3 &mpic 0x2 0x1
++				0x2000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 
+ 				/* IDSEL 0x05 (8139) */
+-				2800 0 0 1 &mpic 1 1
++				0x2800 0x0 0x0 0x1 &mpic 0x1 0x1
+ 
+ 				/* IDSEL 0x06 (Slot 6) */
+-				3000 0 0 1 &mpic 2 1
+-				3000 0 0 2 &mpic 3 1
+-				3000 0 0 3 &mpic 0 1
+-				3000 0 0 4 &mpic 1 1
++				0x3000 0x0 0x0 0x1 &mpic 0x2 0x1
++				0x3000 0x0 0x0 0x2 &mpic 0x3 0x1
++				0x3000 0x0 0x0 0x3 &mpic 0x0 0x1
++				0x3000 0x0 0x0 0x4 &mpic 0x1 0x1
+ 
+ 				/* IDESL 0x07 (Slot 7) */
+-				3800 0 0 1 &mpic 3 1
+-				3800 0 0 2 &mpic 0 1
+-				3800 0 0 3 &mpic 1 1
+-				3800 0 0 4 &mpic 2 1>;
++				0x3800 0x0 0x0 0x1 &mpic 0x3 0x1
++				0x3800 0x0 0x0 0x2 &mpic 0x0 0x1
++				0x3800 0x0 0x0 0x3 &mpic 0x1 0x1
++				0x3800 0x0 0x0 0x4 &mpic 0x2 0x1>;
+ 
+-			reg = <e000 0 0 0 0>;
++			reg = <0xe000 0x0 0x0 0x0 0x0>;
+ 			#interrupt-cells = <1>;
+ 			#size-cells = <2>;
+ 			#address-cells = <3>;
+-			ranges = <02000000 0 80000000
+-				  02000000 0 80000000
+-				  0 20000000
+-				  01000000 0 00000000
+-				  01000000 0 00000000
+-				  0 00080000>;
+-			clock-frequency = <1fca055>;
++			ranges = <0x2000000 0x0 0x80000000
++				  0x2000000 0x0 0x80000000
++				  0x0 0x20000000
++				  0x1000000 0x0 0x0
++				  0x1000000 0x0 0x0
++				  0x0 0x80000>;
++			clock-frequency = <33333333>;
+ 
+ 			isa@4 {
+ 				device_type = "isa";
+ 				#interrupt-cells = <2>;
+ 				#size-cells = <1>;
+ 				#address-cells = <2>;
+-				reg = <2000 0 0 0 0>;
+-				ranges = <1 0 01000000 0 0 00001000>;
++				reg = <0x2000 0x0 0x0 0x0 0x0>;
++				ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>;
+ 				interrupt-parent = <&i8259>;
+ 
+ 				i8259: interrupt-controller@20 {
+ 					interrupt-controller;
+ 					device_type = "interrupt-controller";
+-					reg = <1 20 2
+-					       1 a0 2
+-					       1 4d0 2>;
++					reg = <0x1 0x20 0x2
++					       0x1 0xa0 0x2
++					       0x1 0x4d0 0x2>;
+ 					#address-cells = <0>;
+ 					#interrupt-cells = <2>;
+ 					compatible = "chrp,iic";
+@@ -362,7 +363,7 @@
+ 
+ 				rtc@70 {
+ 					compatible = "pnpPNP,b00";
+-					reg = <1 70 2>;
++					reg = <0x1 0x70 0x2>;
+ 				};
+ 			};
+ 		};
+@@ -370,64 +371,64 @@
+ 
+ 	pci1: pci@e0009000 {
+ 		cell-index = <1>;
+-		interrupt-map-mask = <f800 0 0 7>;
++		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ 		interrupt-map = <
+ 
+ 			/* IDSEL 0x15 */
+-			a800 0 0 1 &mpic b 1
+-			a800 0 0 2 &mpic 1 1
+-			a800 0 0 3 &mpic 2 1
+-			a800 0 0 4 &mpic 3 1>;
++			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
++			0xa800 0x0 0x0 0x2 &mpic 0x1 0x1
++			0xa800 0x0 0x0 0x3 &mpic 0x2 0x1
++			0xa800 0x0 0x0 0x4 &mpic 0x3 0x1>;
+ 
+ 		interrupt-parent = <&mpic>;
+-		interrupts = <19 2>;
++		interrupts = <25 2>;
+ 		bus-range = <0 0>;
+-		ranges = <02000000 0 90000000 90000000 0 10000000
+-			  01000000 0 00000000 e2800000 0 00800000>;
+-		clock-frequency = <3f940aa>;
++		ranges = <0x2000000 0x0 0x90000000 0x90000000 0x0 0x10000000
++			  0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
++		clock-frequency = <66666666>;
+ 		#interrupt-cells = <1>;
+ 		#size-cells = <2>;
+ 		#address-cells = <3>;
+-		reg = <e0009000 1000>;
++		reg = <0xe0009000 0x1000>;
+ 		compatible = "fsl,mpc8540-pci";
+ 		device_type = "pci";
+ 	};
+ 
+ 	pci2: pcie@e000a000 {
+ 		cell-index = <2>;
+-		interrupt-map-mask = <f800 0 0 7>;
++		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ 		interrupt-map = <
+ 
+ 			/* IDSEL 0x0 (PEX) */
+-			00000 0 0 1 &mpic 0 1
+-			00000 0 0 2 &mpic 1 1
+-			00000 0 0 3 &mpic 2 1
+-			00000 0 0 4 &mpic 3 1>;
++			00000 0x0 0x0 0x1 &mpic 0x0 0x1
++			00000 0x0 0x0 0x2 &mpic 0x1 0x1
++			00000 0x0 0x0 0x3 &mpic 0x2 0x1
++			00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
+ 
+ 		interrupt-parent = <&mpic>;
+-		interrupts = <1a 2>;
+-		bus-range = <0 ff>;
+-		ranges = <02000000 0 a0000000 a0000000 0 20000000
+-			  01000000 0 00000000 e3000000 0 08000000>;
+-		clock-frequency = <1fca055>;
++		interrupts = <26 2>;
++		bus-range = <0 255>;
++		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
++			  0x1000000 0x0 0x0 0xe3000000 0x0 0x8000000>;
++		clock-frequency = <33333333>;
+ 		#interrupt-cells = <1>;
+ 		#size-cells = <2>;
+ 		#address-cells = <3>;
+-		reg = <e000a000 1000>;
++		reg = <0xe000a000 0x1000>;
+ 		compatible = "fsl,mpc8548-pcie";
+ 		device_type = "pci";
+ 		pcie@0 {
+-			reg = <0 0 0 0 0>;
++			reg = <0x0 0x0 0x0 0x0 0x0>;
+ 			#size-cells = <2>;
+ 			#address-cells = <3>;
+ 			device_type = "pci";
+-			ranges = <02000000 0 a0000000
+-				  02000000 0 a0000000
+-				  0 20000000
+-
+-				  01000000 0 00000000
+-				  01000000 0 00000000
+-				  0 08000000>;
++			ranges = <0x2000000 0x0 0xa0000000
++				  0x2000000 0x0 0xa0000000
++				  0x0 0x20000000
++
++				  0x1000000 0x0 0x0
++				  0x1000000 0x0 0x0
++				  0x0 0x8000000>;
+ 		};
+ 	};
+ };
+--- a/arch/powerpc/boot/dts/mpc8555cds.dts
++++ b/arch/powerpc/boot/dts/mpc8555cds.dts
+@@ -1,7 +1,7 @@
+ /*
+  * MPC8555 CDS Device Tree Source
+  *
+- * Copyright 2006 Freescale Semiconductor Inc.
++ * Copyright 2006, 2008 Freescale Semiconductor Inc.
+  *
+  * This program is free software; you can redistribute  it and/or modify it
+  * under  the terms of  the GNU General  Public License as published by the
+@@ -9,6 +9,7 @@
+  * option) any later version.
+  */
+ 
++/dts-v1/;
+ 
+ / {
+ 	model = "MPC8555CDS";
+@@ -31,11 +32,11 @@
+ 
+ 		PowerPC,8555@0 {
+ 			device_type = "cpu";
+-			reg = <0>;
+-			d-cache-line-size = <20>;	// 32 bytes
+-			i-cache-line-size = <20>;	// 32 bytes
+-			d-cache-size = <8000>;		// L1, 32K
+-			i-cache-size = <8000>;		// L1, 32K
++			reg = <0x0>;
++			d-cache-line-size = <32>;	// 32 bytes
++			i-cache-line-size = <32>;	// 32 bytes
++			d-cache-size = <0x8000>;		// L1, 32K
++			i-cache-size = <0x8000>;		// L1, 32K
+ 			timebase-frequency = <0>;	//  33 MHz, from uboot
+ 			bus-frequency = <0>;	// 166 MHz
+ 			clock-frequency = <0>;	// 825 MHz, from uboot
+@@ -44,31 +45,31 @@
+ 
+ 	memory {
+ 		device_type = "memory";
+-		reg = <00000000 08000000>;	// 128M at 0x0
++		reg = <0x0 0x8000000>;	// 128M at 0x0
+ 	};
+ 
+ 	soc8555@e0000000 {
+ 		#address-cells = <1>;
+ 		#size-cells = <1>;
+ 		device_type = "soc";
+-		ranges = <0 e0000000 00100000>;
+-		reg = <e0000000 00001000>;	// CCSRBAR 1M
++		ranges = <0x0 0xe0000000 0x100000>;
++		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
+ 		bus-frequency = <0>;
+ 
+ 		memory-controller@2000 {
+ 			compatible = "fsl,8555-memory-controller";
+-			reg = <2000 1000>;
++			reg = <0x2000 0x1000>;
+ 			interrupt-parent = <&mpic>;
+-			interrupts = <12 2>;
++			interrupts = <18 2>;
+ 		};
+ 
+ 		l2-cache-controller@20000 {
+ 			compatible = "fsl,8555-l2-cache-controller";
+-			reg = <20000 1000>;
+-			cache-line-size = <20>;	// 32 bytes
+-			cache-size = <40000>;	// L2, 256K
++			reg = <0x20000 0x1000>;
++			cache-line-size = <32>;	// 32 bytes
++			cache-size = <0x40000>;	// L2, 256K
+ 			interrupt-parent = <&mpic>;
+-			interrupts = <10 2>;
++			interrupts = <16 2>;
+ 		};
+ 
+ 		i2c@3000 {
+@@ -76,8 +77,8 @@
+ 			#size-cells = <0>;
+ 			cell-index = <0>;
+ 			compatible = "fsl-i2c";
+-			reg = <3000 100>;
+-			interrupts = <2b 2>;
++			reg = <0x3000 0x100>;
++			interrupts = <43 2>;
+ 			interrupt-parent = <&mpic>;
+ 			dfsrr;
+ 		};
+@@ -86,18 +87,18 @@
+ 			#address-cells = <1>;
+ 			#size-cells = <0>;
+ 			compatible = "fsl,gianfar-mdio";
+-			reg = <24520 20>;
++			reg = <0x24520 0x20>;
+ 
+ 			phy0: ethernet-phy@0 {
+ 				interrupt-parent = <&mpic>;
+ 				interrupts = <5 1>;
+-				reg = <0>;
++				reg = <0x0>;
+ 				device_type = "ethernet-phy";
+ 			};
+ 			phy1: ethernet-phy@1 {
+ 				interrupt-parent = <&mpic>;
+ 				interrupts = <5 1>;
+-				reg = <1>;
++				reg = <0x1>;
+ 				device_type = "ethernet-phy";
+ 			};
+ 		};
+@@ -107,9 +108,9 @@
+ 			device_type = "network";
+ 			model = "TSEC";
+ 			compatible = "gianfar";
+-			reg = <24000 1000>;
++			reg = <0x24000 0x1000>;
+ 			local-mac-address = [ 00 00 00 00 00 00 ];
+-			interrupts = <1d 2 1e 2 22 2>;
++			interrupts = <29 2 30 2 34 2>;
+ 			interrupt-parent = <&mpic>;
+ 			phy-handle = <&phy0>;
+ 		};
+@@ -119,9 +120,9 @@
+ 			device_type = "network";
+ 			model = "TSEC";
+ 			compatible = "gianfar";
+-			reg = <25000 1000>;
++			reg = <0x25000 0x1000>;
+ 			local-mac-address = [ 00 00 00 00 00 00 ];
+-			interrupts = <23 2 24 2 28 2>;
++			interrupts = <35 2 36 2 40 2>;
+ 			interrupt-parent = <&mpic>;
+ 			phy-handle = <&phy1>;
+ 		};
+@@ -130,9 +131,9 @@
+ 			cell-index = <0>;
+ 			device_type = "serial";
+ 			compatible = "ns16550";
+-			reg = <4500 100>; 	// reg base, size
++			reg = <0x4500 0x100>; 	// reg base, size
+ 			clock-frequency = <0>; 	// should we fill in in uboot?
+-			interrupts = <2a 2>;
++			interrupts = <42 2>;
+ 			interrupt-parent = <&mpic>;
+ 		};
+ 
+@@ -140,9 +141,9 @@
+ 			cell-index = <1>;
+ 			device_type = "serial";
+ 			compatible = "ns16550";
+-			reg = <4600 100>;	// reg base, size
++			reg = <0x4600 0x100>;	// reg base, size
+ 			clock-frequency = <0>; 	// should we fill in in uboot?
+-			interrupts = <2a 2>;
++			interrupts = <42 2>;
+ 			interrupt-parent = <&mpic>;
+ 		};
+ 
+@@ -151,7 +152,7 @@
+ 			interrupt-controller;
+ 			#address-cells = <0>;
+ 			#interrupt-cells = <2>;
+-			reg = <40000 40000>;
++			reg = <0x40000 0x40000>;
+ 			compatible = "chrp,open-pic";
+ 			device_type = "open-pic";
+                         big-endian;
+@@ -161,17 +162,17 @@
+ 			#address-cells = <1>;
+ 			#size-cells = <1>;
+ 			compatible = "fsl,mpc8555-cpm", "fsl,cpm2";
+-			reg = <919c0 30>;
++			reg = <0x919c0 0x30>;
+ 			ranges;
+ 
+ 			muram@80000 {
+ 				#address-cells = <1>;
+ 				#size-cells = <1>;
+-				ranges = <0 80000 10000>;
++				ranges = <0x0 0x80000 0x10000>;
+ 
+ 				data@0 {
+ 					compatible = "fsl,cpm-muram-data";
+-					reg = <0 2000 9000 1000>;
++					reg = <0x0 0x2000 0x9000 0x1000>;
+ 				};
+ 			};
+ 
+@@ -179,16 +180,16 @@
+ 				compatible = "fsl,mpc8555-brg",
+ 				             "fsl,cpm2-brg",
+ 				             "fsl,cpm-brg";
+-				reg = <919f0 10 915f0 10>;
++				reg = <0x919f0 0x10 0x915f0 0x10>;
+ 			};
+ 
+ 			cpmpic: pic@90c00 {
+ 				interrupt-controller;
+ 				#address-cells = <0>;
+ 				#interrupt-cells = <2>;
+-				interrupts = <2e 2>;
++				interrupts = <46 2>;
+ 				interrupt-parent = <&mpic>;
+-				reg = <90c00 80>;
++				reg = <0x90c00 0x80>;
+ 				compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic";
+ 			};
+ 		};
+@@ -196,68 +197,68 @@
+ 
+ 	pci0: pci@e0008000 {
+ 		cell-index = <0>;
+-		interrupt-map-mask = <1f800 0 0 7>;
++		interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
+ 		interrupt-map = <
+ 
+ 			/* IDSEL 0x10 */
+-			08000 0 0 1 &mpic 0 1
+-			08000 0 0 2 &mpic 1 1
+-			08000 0 0 3 &mpic 2 1
+-			08000 0 0 4 &mpic 3 1
++			0x8000 0x0 0x0 0x1 &mpic 0x0 0x1
++			0x8000 0x0 0x0 0x2 &mpic 0x1 0x1
++			0x8000 0x0 0x0 0x3 &mpic 0x2 0x1
++			0x8000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 
+ 			/* IDSEL 0x11 */
+-			08800 0 0 1 &mpic 0 1
+-			08800 0 0 2 &mpic 1 1
+-			08800 0 0 3 &mpic 2 1
+-			08800 0 0 4 &mpic 3 1
++			0x8800 0x0 0x0 0x1 &mpic 0x0 0x1
++			0x8800 0x0 0x0 0x2 &mpic 0x1 0x1
++			0x8800 0x0 0x0 0x3 &mpic 0x2 0x1
++			0x8800 0x0 0x0 0x4 &mpic 0x3 0x1
+ 
+ 			/* IDSEL 0x12 (Slot 1) */
+-			09000 0 0 1 &mpic 0 1
+-			09000 0 0 2 &mpic 1 1
+-			09000 0 0 3 &mpic 2 1
+-			09000 0 0 4 &mpic 3 1
++			0x9000 0x0 0x0 0x1 &mpic 0x0 0x1
++			0x9000 0x0 0x0 0x2 &mpic 0x1 0x1
++			0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
++			0x9000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 
+ 			/* IDSEL 0x13 (Slot 2) */
+-			09800 0 0 1 &mpic 1 1
+-			09800 0 0 2 &mpic 2 1
+-			09800 0 0 3 &mpic 3 1
+-			09800 0 0 4 &mpic 0 1
++			0x9800 0x0 0x0 0x1 &mpic 0x1 0x1
++			0x9800 0x0 0x0 0x2 &mpic 0x2 0x1
++			0x9800 0x0 0x0 0x3 &mpic 0x3 0x1
++			0x9800 0x0 0x0 0x4 &mpic 0x0 0x1
+ 
+ 			/* IDSEL 0x14 (Slot 3) */
+-			0a000 0 0 1 &mpic 2 1
+-			0a000 0 0 2 &mpic 3 1
+-			0a000 0 0 3 &mpic 0 1
+-			0a000 0 0 4 &mpic 1 1
++			0xa000 0x0 0x0 0x1 &mpic 0x2 0x1
++			0xa000 0x0 0x0 0x2 &mpic 0x3 0x1
++			0xa000 0x0 0x0 0x3 &mpic 0x0 0x1
++			0xa000 0x0 0x0 0x4 &mpic 0x1 0x1
+ 
+ 			/* IDSEL 0x15 (Slot 4) */
+-			0a800 0 0 1 &mpic 3 1
+-			0a800 0 0 2 &mpic 0 1
+-			0a800 0 0 3 &mpic 1 1
+-			0a800 0 0 4 &mpic 2 1
++			0xa800 0x0 0x0 0x1 &mpic 0x3 0x1
++			0xa800 0x0 0x0 0x2 &mpic 0x0 0x1
++			0xa800 0x0 0x0 0x3 &mpic 0x1 0x1
++			0xa800 0x0 0x0 0x4 &mpic 0x2 0x1
+ 
+ 			/* Bus 1 (Tundra Bridge) */
+ 			/* IDSEL 0x12 (ISA bridge) */
+-			19000 0 0 1 &mpic 0 1
+-			19000 0 0 2 &mpic 1 1
+-			19000 0 0 3 &mpic 2 1
+-			19000 0 0 4 &mpic 3 1>;
++			0x19000 0x0 0x0 0x1 &mpic 0x0 0x1
++			0x19000 0x0 0x0 0x2 &mpic 0x1 0x1
++			0x19000 0x0 0x0 0x3 &mpic 0x2 0x1
++			0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>;
+ 		interrupt-parent = <&mpic>;
+-		interrupts = <18 2>;
++		interrupts = <24 2>;
+ 		bus-range = <0 0>;
+-		ranges = <02000000 0 80000000 80000000 0 20000000
+-			  01000000 0 00000000 e2000000 0 00100000>;
+-		clock-frequency = <3f940aa>;
++		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
++			  0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
++		clock-frequency = <66666666>;
+ 		#interrupt-cells = <1>;
+ 		#size-cells = <2>;
+ 		#address-cells = <3>;
+-		reg = <e0008000 1000>;
++		reg = <0xe0008000 0x1000>;
+ 		compatible = "fsl,mpc8540-pci";
+ 		device_type = "pci";
+ 
+ 		i8259@19000 {
+ 			interrupt-controller;
+ 			device_type = "interrupt-controller";
+-			reg = <19000 0 0 0 1>;
++			reg = <0x19000 0x0 0x0 0x0 0x1>;
+ 			#address-cells = <0>;
+ 			#interrupt-cells = <2>;
+ 			compatible = "chrp,iic";
+@@ -268,24 +269,24 @@
+ 
+ 	pci1: pci@e0009000 {
+ 		cell-index = <1>;
+-		interrupt-map-mask = <f800 0 0 7>;
++		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ 		interrupt-map = <
+ 
+ 			/* IDSEL 0x15 */
+-			a800 0 0 1 &mpic b 1
+-			a800 0 0 2 &mpic b 1
+-			a800 0 0 3 &mpic b 1
+-			a800 0 0 4 &mpic b 1>;
++			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
++			0xa800 0x0 0x0 0x2 &mpic 0xb 0x1
++			0xa800 0x0 0x0 0x3 &mpic 0xb 0x1
++			0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>;
+ 		interrupt-parent = <&mpic>;
+-		interrupts = <19 2>;
++		interrupts = <25 2>;
+ 		bus-range = <0 0>;
+-		ranges = <02000000 0 a0000000 a0000000 0 20000000
+-			  01000000 0 00000000 e3000000 0 00100000>;
+-		clock-frequency = <3f940aa>;
++		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
++			  0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
++		clock-frequency = <66666666>;
+ 		#interrupt-cells = <1>;
+ 		#size-cells = <2>;
+ 		#address-cells = <3>;
+-		reg = <e0009000 1000>;
++		reg = <0xe0009000 0x1000>;
+ 		compatible = "fsl,mpc8540-pci";
+ 		device_type = "pci";
+ 	};
+--- a/arch/powerpc/boot/dts/mpc8560ads.dts
++++ b/arch/powerpc/boot/dts/mpc8560ads.dts
+@@ -1,7 +1,7 @@
+ /*
+  * MPC8560 ADS Device Tree Source
+  *
+- * Copyright 2006 Freescale Semiconductor Inc.
++ * Copyright 2006, 2008 Freescale Semiconductor Inc.
+  *
+  * This program is free software; you can redistribute  it and/or modify it
+  * under  the terms of  the GNU General  Public License as published by the
+@@ -9,6 +9,7 @@
+  * option) any later version.
+  */
+ 
++/dts-v1/;
+ 
+ / {
+ 	model = "MPC8560ADS";
+@@ -32,74 +33,74 @@
+ 
+ 		PowerPC,8560@0 {
+ 			device_type = "cpu";
+-			reg = <0>;
+-			d-cache-line-size = <20>;	// 32 bytes
+-			i-cache-line-size = <20>;	// 32 bytes
+-			d-cache-size = <8000>;		// L1, 32K
+-			i-cache-size = <8000>;		// L1, 32K
+-			timebase-frequency = <04ead9a0>;
+-			bus-frequency = <13ab6680>;
+-			clock-frequency = <312c8040>;
++			reg = <0x0>;
++			d-cache-line-size = <32>;	// 32 bytes
++			i-cache-line-size = <32>;	// 32 bytes
++			d-cache-size = <0x8000>;		// L1, 32K
++			i-cache-size = <0x8000>;		// L1, 32K
++			timebase-frequency = <82500000>;
++			bus-frequency = <330000000>;
++			clock-frequency = <825000000>;
+ 		};
+ 	};
+ 
+ 	memory {
+ 		device_type = "memory";
+-		reg = <00000000 10000000>;
++		reg = <0x0 0x10000000>;
+ 	};
+ 
+ 	soc8560@e0000000 {
+ 		#address-cells = <1>;
+ 		#size-cells = <1>;
+ 		device_type = "soc";
+-		ranges = <0 e0000000 00100000>;
+-		reg = <e0000000 00000200>;
+-		bus-frequency = <13ab6680>;
++		ranges = <0x0 0xe0000000 0x100000>;
++		reg = <0xe0000000 0x200>;
++		bus-frequency = <330000000>;
+ 
+ 		memory-controller@2000 {
+ 			compatible = "fsl,8540-memory-controller";
+-			reg = <2000 1000>;
++			reg = <0x2000 0x1000>;
+ 			interrupt-parent = <&mpic>;
+-			interrupts = <12 2>;
++			interrupts = <18 2>;
+ 		};
+ 
+ 		l2-cache-controller@20000 {
+ 			compatible = "fsl,8540-l2-cache-controller";
+-			reg = <20000 1000>;
+-			cache-line-size = <20>;	// 32 bytes
+-			cache-size = <40000>;	// L2, 256K
++			reg = <0x20000 0x1000>;
++			cache-line-size = <32>;	// 32 bytes
++			cache-size = <0x40000>;	// L2, 256K
+ 			interrupt-parent = <&mpic>;
+-			interrupts = <10 2>;
++			interrupts = <16 2>;
+ 		};
+ 
+ 		mdio@24520 {
+ 			#address-cells = <1>;
+ 			#size-cells = <0>;
+ 			compatible = "fsl,gianfar-mdio";
+-			reg = <24520 20>;
++			reg = <0x24520 0x20>;
+ 
+ 			phy0: ethernet-phy@0 {
+ 				interrupt-parent = <&mpic>;
+ 				interrupts = <5 1>;
+-				reg = <0>;
++				reg = <0x0>;
+ 				device_type = "ethernet-phy";
+ 			};
+ 			phy1: ethernet-phy@1 {
+ 				interrupt-parent = <&mpic>;
+ 				interrupts = <5 1>;
+-				reg = <1>;
++				reg = <0x1>;
+ 				device_type = "ethernet-phy";
+ 			};
+ 			phy2: ethernet-phy@2 {
+ 				interrupt-parent = <&mpic>;
+ 				interrupts = <7 1>;
+-				reg = <2>;
++				reg = <0x2>;
+ 				device_type = "ethernet-phy";
+ 			};
+ 			phy3: ethernet-phy@3 {
+ 				interrupt-parent = <&mpic>;
+ 				interrupts = <7 1>;
+-				reg = <3>;
++				reg = <0x3>;
+ 				device_type = "ethernet-phy";
+ 			};
+ 		};
+@@ -109,9 +110,9 @@
+ 			device_type = "network";
+ 			model = "TSEC";
+ 			compatible = "gianfar";
+-			reg = <24000 1000>;
++			reg = <0x24000 0x1000>;
+ 			local-mac-address = [ 00 00 00 00 00 00 ];
+-			interrupts = <1d 2 1e 2 22 2>;
++			interrupts = <29 2 30 2 34 2>;
+ 			interrupt-parent = <&mpic>;
+ 			phy-handle = <&phy0>;
+ 		};
+@@ -121,9 +122,9 @@
+ 			device_type = "network";
+ 			model = "TSEC";
+ 			compatible = "gianfar";
+-			reg = <25000 1000>;
++			reg = <0x25000 0x1000>;
+ 			local-mac-address = [ 00 00 00 00 00 00 ];
+-			interrupts = <23 2 24 2 28 2>;
++			interrupts = <35 2 36 2 40 2>;
+ 			interrupt-parent = <&mpic>;
+ 			phy-handle = <&phy1>;
+ 		};
+@@ -132,7 +133,7 @@
+ 			interrupt-controller;
+ 			#address-cells = <0>;
+ 			#interrupt-cells = <2>;
+-			reg = <40000 40000>;
++			reg = <0x40000 0x40000>;
+ 			device_type = "open-pic";
+ 		};
+ 
+@@ -140,17 +141,17 @@
+ 			#address-cells = <1>;
+ 			#size-cells = <1>;
+ 			compatible = "fsl,mpc8560-cpm", "fsl,cpm2";
+-			reg = <919c0 30>;
++			reg = <0x919c0 0x30>;
+ 			ranges;
+ 
+ 			muram@80000 {
+ 				#address-cells = <1>;
+ 				#size-cells = <1>;
+-				ranges = <0 80000 10000>;
++				ranges = <0x0 0x80000 0x10000>;
+ 
+ 				data@0 {
+ 					compatible = "fsl,cpm-muram-data";
+-					reg = <0 4000 9000 2000>;
++					reg = <0x0 0x4000 0x9000 0x2000>;
+ 				};
+ 			};
+ 
+@@ -158,17 +159,17 @@
+ 				compatible = "fsl,mpc8560-brg",
+ 				             "fsl,cpm2-brg",
+ 				             "fsl,cpm-brg";
+-				reg = <919f0 10 915f0 10>;
+-				clock-frequency = <d#165000000>;
++				reg = <0x919f0 0x10 0x915f0 0x10>;
++				clock-frequency = <165000000>;
+ 			};
+ 
+ 			cpmpic: pic@90c00 {
+ 				interrupt-controller;
+ 				#address-cells = <0>;
+ 				#interrupt-cells = <2>;
+-				interrupts = <2e 2>;
++				interrupts = <46 2>;
+ 				interrupt-parent = <&mpic>;
+-				reg = <90c00 80>;
++				reg = <0x90c00 0x80>;
+ 				compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
+ 			};
+ 
+@@ -176,11 +177,11 @@
+ 				device_type = "serial";
+ 				compatible = "fsl,mpc8560-scc-uart",
+ 				             "fsl,cpm2-scc-uart";
+-				reg = <91a00 20 88000 100>;
++				reg = <0x91a00 0x20 0x88000 0x100>;
+ 				fsl,cpm-brg = <1>;
+-				fsl,cpm-command = <00800000>;
+-				current-speed = <1c200>;
+-				interrupts = <28 8>;
++				fsl,cpm-command = <0x800000>;
++				current-speed = <115200>;
++				interrupts = <40 8>;
+ 				interrupt-parent = <&cpmpic>;
+ 			};
+ 
+@@ -188,11 +189,11 @@
+ 				device_type = "serial";
+ 				compatible = "fsl,mpc8560-scc-uart",
+ 				             "fsl,cpm2-scc-uart";
+-				reg = <91a20 20 88100 100>;
++				reg = <0x91a20 0x20 0x88100 0x100>;
+ 				fsl,cpm-brg = <2>;
+-				fsl,cpm-command = <04a00000>;
+-				current-speed = <1c200>;
+-				interrupts = <29 8>;
++				fsl,cpm-command = <0x4a00000>;
++				current-speed = <115200>;
++				interrupts = <41 8>;
+ 				interrupt-parent = <&cpmpic>;
+ 			};
+ 
+@@ -200,10 +201,10 @@
+ 				device_type = "network";
+ 				compatible = "fsl,mpc8560-fcc-enet",
+ 				             "fsl,cpm2-fcc-enet";
+-				reg = <91320 20 88500 100 913b0 1>;
++				reg = <0x91320 0x20 0x88500 0x100 0x913b0 0x1>;
+ 				local-mac-address = [ 00 00 00 00 00 00 ];
+-				fsl,cpm-command = <16200300>;
+-				interrupts = <21 8>;
++				fsl,cpm-command = <0x16200300>;
++				interrupts = <33 8>;
+ 				interrupt-parent = <&cpmpic>;
+ 				phy-handle = <&phy2>;
+ 			};
+@@ -212,10 +213,10 @@
+ 				device_type = "network";
+ 				compatible = "fsl,mpc8560-fcc-enet",
+ 				             "fsl,cpm2-fcc-enet";
+-				reg = <91340 20 88600 100 913d0 1>;
++				reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>;
+ 				local-mac-address = [ 00 00 00 00 00 00 ];
+-				fsl,cpm-command = <1a400300>;
+-				interrupts = <22 8>;
++				fsl,cpm-command = <0x1a400300>;
++				interrupts = <34 8>;
+ 				interrupt-parent = <&cpmpic>;
+ 				phy-handle = <&phy3>;
+ 			};
+@@ -229,87 +230,87 @@
+ 		#address-cells = <3>;
+ 		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+ 		device_type = "pci";
+-		reg = <e0008000 1000>;
+-		clock-frequency = <3f940aa>;
+-		interrupt-map-mask = <f800 0 0 7>;
++		reg = <0xe0008000 0x1000>;
++		clock-frequency = <66666666>;
++		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ 		interrupt-map = <
+ 
+ 				/* IDSEL 0x2 */
+-				 1000 0 0 1 &mpic 1 1
+-				 1000 0 0 2 &mpic 2 1
+-				 1000 0 0 3 &mpic 3 1
+-				 1000 0 0 4 &mpic 4 1
++				 0x1000 0x0 0x0 0x1 &mpic 0x1 0x1
++				 0x1000 0x0 0x0 0x2 &mpic 0x2 0x1
++				 0x1000 0x0 0x0 0x3 &mpic 0x3 0x1
++				 0x1000 0x0 0x0 0x4 &mpic 0x4 0x1
+ 
+ 				/* IDSEL 0x3 */
+-				 1800 0 0 1 &mpic 4 1
+-				 1800 0 0 2 &mpic 1 1
+-				 1800 0 0 3 &mpic 2 1
+-				 1800 0 0 4 &mpic 3 1
++				 0x1800 0x0 0x0 0x1 &mpic 0x4 0x1
++				 0x1800 0x0 0x0 0x2 &mpic 0x1 0x1
++				 0x1800 0x0 0x0 0x3 &mpic 0x2 0x1
++				 0x1800 0x0 0x0 0x4 &mpic 0x3 0x1
+ 
+ 				/* IDSEL 0x4 */
+-				 2000 0 0 1 &mpic 3 1
+-				 2000 0 0 2 &mpic 4 1
+-				 2000 0 0 3 &mpic 1 1
+-				 2000 0 0 4 &mpic 2 1
++				 0x2000 0x0 0x0 0x1 &mpic 0x3 0x1
++				 0x2000 0x0 0x0 0x2 &mpic 0x4 0x1
++				 0x2000 0x0 0x0 0x3 &mpic 0x1 0x1
++				 0x2000 0x0 0x0 0x4 &mpic 0x2 0x1
+ 
+ 				/* IDSEL 0x5  */
+-				 2800 0 0 1 &mpic 2 1
+-				 2800 0 0 2 &mpic 3 1
+-				 2800 0 0 3 &mpic 4 1
+-				 2800 0 0 4 &mpic 1 1
++				 0x2800 0x0 0x0 0x1 &mpic 0x2 0x1
++				 0x2800 0x0 0x0 0x2 &mpic 0x3 0x1
++				 0x2800 0x0 0x0 0x3 &mpic 0x4 0x1
++				 0x2800 0x0 0x0 0x4 &mpic 0x1 0x1
+ 
+ 				/* IDSEL 12 */
+-				 6000 0 0 1 &mpic 1 1
+-				 6000 0 0 2 &mpic 2 1
+-				 6000 0 0 3 &mpic 3 1
+-				 6000 0 0 4 &mpic 4 1
++				 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
++				 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
++				 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
++				 0x6000 0x0 0x0 0x4 &mpic 0x4 0x1
+ 
+ 				/* IDSEL 13 */
+-				 6800 0 0 1 &mpic 4 1
+-				 6800 0 0 2 &mpic 1 1
+-				 6800 0 0 3 &mpic 2 1
+-				 6800 0 0 4 &mpic 3 1
++				 0x6800 0x0 0x0 0x1 &mpic 0x4 0x1
++				 0x6800 0x0 0x0 0x2 &mpic 0x1 0x1
++				 0x6800 0x0 0x0 0x3 &mpic 0x2 0x1
++				 0x6800 0x0 0x0 0x4 &mpic 0x3 0x1
+ 
+ 				/* IDSEL 14*/
+-				 7000 0 0 1 &mpic 3 1
+-				 7000 0 0 2 &mpic 4 1
+-				 7000 0 0 3 &mpic 1 1
+-				 7000 0 0 4 &mpic 2 1
++				 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
++				 0x7000 0x0 0x0 0x2 &mpic 0x4 0x1
++				 0x7000 0x0 0x0 0x3 &mpic 0x1 0x1
++				 0x7000 0x0 0x0 0x4 &mpic 0x2 0x1
+ 
+ 				/* IDSEL 15 */
+-				 7800 0 0 1 &mpic 2 1
+-				 7800 0 0 2 &mpic 3 1
+-				 7800 0 0 3 &mpic 4 1
+-				 7800 0 0 4 &mpic 1 1
++				 0x7800 0x0 0x0 0x1 &mpic 0x2 0x1
++				 0x7800 0x0 0x0 0x2 &mpic 0x3 0x1
++				 0x7800 0x0 0x0 0x3 &mpic 0x4 0x1
++				 0x7800 0x0 0x0 0x4 &mpic 0x1 0x1
+ 
+ 				/* IDSEL 18 */
+-				 9000 0 0 1 &mpic 1 1
+-				 9000 0 0 2 &mpic 2 1
+-				 9000 0 0 3 &mpic 3 1
+-				 9000 0 0 4 &mpic 4 1
++				 0x9000 0x0 0x0 0x1 &mpic 0x1 0x1
++				 0x9000 0x0 0x0 0x2 &mpic 0x2 0x1
++				 0x9000 0x0 0x0 0x3 &mpic 0x3 0x1
++				 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1
+ 
+ 				/* IDSEL 19 */
+-				 9800 0 0 1 &mpic 4 1
+-				 9800 0 0 2 &mpic 1 1
+-				 9800 0 0 3 &mpic 2 1
+-				 9800 0 0 4 &mpic 3 1
++				 0x9800 0x0 0x0 0x1 &mpic 0x4 0x1
++				 0x9800 0x0 0x0 0x2 &mpic 0x1 0x1
++				 0x9800 0x0 0x0 0x3 &mpic 0x2 0x1
++				 0x9800 0x0 0x0 0x4 &mpic 0x3 0x1
+ 
+ 				/* IDSEL 20 */
+-				 a000 0 0 1 &mpic 3 1
+-				 a000 0 0 2 &mpic 4 1
+-				 a000 0 0 3 &mpic 1 1
+-				 a000 0 0 4 &mpic 2 1
++				 0xa000 0x0 0x0 0x1 &mpic 0x3 0x1
++				 0xa000 0x0 0x0 0x2 &mpic 0x4 0x1
++				 0xa000 0x0 0x0 0x3 &mpic 0x1 0x1
++				 0xa000 0x0 0x0 0x4 &mpic 0x2 0x1
+ 
+ 				/* IDSEL 21 */
+-				 a800 0 0 1 &mpic 2 1
+-				 a800 0 0 2 &mpic 3 1
+-				 a800 0 0 3 &mpic 4 1
+-				 a800 0 0 4 &mpic 1 1>;
++				 0xa800 0x0 0x0 0x1 &mpic 0x2 0x1
++				 0xa800 0x0 0x0 0x2 &mpic 0x3 0x1
++				 0xa800 0x0 0x0 0x3 &mpic 0x4 0x1
++				 0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>;
+ 
+ 		interrupt-parent = <&mpic>;
+-		interrupts = <18 2>;
++		interrupts = <24 2>;
+ 		bus-range = <0 0>;
+-		ranges = <02000000 0 80000000 80000000 0 20000000
+-			  01000000 0 00000000 e2000000 0 01000000>;
++		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
++			  0x1000000 0x0 0x0 0xe2000000 0x0 0x1000000>;
+ 	};
+ };
+--- a/arch/powerpc/boot/dts/mpc8568mds.dts
++++ b/arch/powerpc/boot/dts/mpc8568mds.dts
+@@ -1,7 +1,7 @@
+ /*
+  * MPC8568E MDS Device Tree Source
+  *
+- * Copyright 2007 Freescale Semiconductor Inc.
++ * Copyright 2007, 2008 Freescale Semiconductor Inc.
+  *
+  * This program is free software; you can redistribute  it and/or modify it
+  * under  the terms of  the GNU General  Public License as published by the
+@@ -9,10 +9,7 @@
+  * option) any later version.
+  */
+ 
+-
+-/*
+-/memreserve/	00000000 1000000;
+-*/
++/dts-v1/;
+ 
+ / {
+ 	model = "MPC8568EMDS";
+@@ -37,11 +34,11 @@
+ 
+ 		PowerPC,8568@0 {
+ 			device_type = "cpu";
+-			reg = <0>;
+-			d-cache-line-size = <20>;	// 32 bytes
+-			i-cache-line-size = <20>;	// 32 bytes
+-			d-cache-size = <8000>;		// L1, 32K
+-			i-cache-size = <8000>;		// L1, 32K
++			reg = <0x0>;
++			d-cache-line-size = <32>;	// 32 bytes
++			i-cache-line-size = <32>;	// 32 bytes
++			d-cache-size = <0x8000>;		// L1, 32K
++			i-cache-size = <0x8000>;		// L1, 32K
+ 			timebase-frequency = <0>;
+ 			bus-frequency = <0>;
+ 			clock-frequency = <0>;
+@@ -50,36 +47,36 @@
+ 
+ 	memory {
+ 		device_type = "memory";
+-		reg = <00000000 10000000>;
++		reg = <0x0 0x10000000>;
+ 	};
+ 
+ 	bcsr@f8000000 {
+ 		device_type = "board-control";
+-		reg = <f8000000 8000>;
++		reg = <0xf8000000 0x8000>;
+ 	};
+ 
+ 	soc8568@e0000000 {
+ 		#address-cells = <1>;
+ 		#size-cells = <1>;
+ 		device_type = "soc";
+-		ranges = <0 e0000000 00100000>;
+-		reg = <e0000000 00001000>;
++		ranges = <0x0 0xe0000000 0x100000>;
++		reg = <0xe0000000 0x1000>;
+ 		bus-frequency = <0>;
+ 
+ 		memory-controller@2000 {
+ 			compatible = "fsl,8568-memory-controller";
+-			reg = <2000 1000>;
++			reg = <0x2000 0x1000>;
+ 			interrupt-parent = <&mpic>;
+-			interrupts = <12 2>;
++			interrupts = <18 2>;
+ 		};
+ 
+ 		l2-cache-controller@20000 {
+ 			compatible = "fsl,8568-l2-cache-controller";
+-			reg = <20000 1000>;
+-			cache-line-size = <20>;	// 32 bytes
+-			cache-size = <80000>;	// L2, 512K
++			reg = <0x20000 0x1000>;
++			cache-line-size = <32>;	// 32 bytes
++			cache-size = <0x80000>;	// L2, 512K
+ 			interrupt-parent = <&mpic>;
+-			interrupts = <10 2>;
++			interrupts = <16 2>;
+ 		};
+ 
+ 		i2c@3000 {
+@@ -87,14 +84,14 @@
+ 			#size-cells = <0>;
+ 			cell-index = <0>;
+ 			compatible = "fsl-i2c";
+-			reg = <3000 100>;
+-			interrupts = <2b 2>;
++			reg = <0x3000 0x100>;
++			interrupts = <43 2>;
+ 			interrupt-parent = <&mpic>;
+ 			dfsrr;
+ 
+ 			rtc@68 {
+ 				compatible = "dallas,ds1374";
+-				reg = <68>;
++				reg = <0x68>;
+ 			};
+ 		};
+ 
+@@ -103,8 +100,8 @@
+ 			#size-cells = <0>;
+ 			cell-index = <1>;
+ 			compatible = "fsl-i2c";
+-			reg = <3100 100>;
+-			interrupts = <2b 2>;
++			reg = <0x3100 0x100>;
++			interrupts = <43 2>;
+ 			interrupt-parent = <&mpic>;
+ 			dfsrr;
+ 		};
+@@ -113,30 +110,30 @@
+ 			#address-cells = <1>;
+ 			#size-cells = <0>;
+ 			compatible = "fsl,gianfar-mdio";
+-			reg = <24520 20>;
++			reg = <0x24520 0x20>;
+ 
+ 			phy0: ethernet-phy@7 {
+ 				interrupt-parent = <&mpic>;
+ 				interrupts = <1 1>;
+-				reg = <7>;
++				reg = <0x7>;
+ 				device_type = "ethernet-phy";
+ 			};
+ 			phy1: ethernet-phy@1 {
+ 				interrupt-parent = <&mpic>;
+ 				interrupts = <2 1>;
+-				reg = <1>;
++				reg = <0x1>;
+ 				device_type = "ethernet-phy";
+ 			};
+ 			phy2: ethernet-phy@2 {
+ 				interrupt-parent = <&mpic>;
+ 				interrupts = <1 1>;
+-				reg = <2>;
++				reg = <0x2>;
+ 				device_type = "ethernet-phy";
+ 			};
+ 			phy3: ethernet-phy@3 {
+ 				interrupt-parent = <&mpic>;
+ 				interrupts = <2 1>;
+-				reg = <3>;
++				reg = <0x3>;
+ 				device_type = "ethernet-phy";
+ 			};
+ 		};
+@@ -146,9 +143,9 @@
+ 			device_type = "network";
+ 			model = "eTSEC";
+ 			compatible = "gianfar";
+-			reg = <24000 1000>;
++			reg = <0x24000 0x1000>;
+ 			local-mac-address = [ 00 00 00 00 00 00 ];
+- 			interrupts = <1d 2 1e 2 22 2>;
++ 			interrupts = <29 2 30 2 34 2>;
+ 			interrupt-parent = <&mpic>;
+ 			phy-handle = <&phy2>;
+ 		};
+@@ -158,9 +155,9 @@
+ 			device_type = "network";
+ 			model = "eTSEC";
+ 			compatible = "gianfar";
+-			reg = <25000 1000>;
++			reg = <0x25000 0x1000>;
+ 			local-mac-address = [ 00 00 00 00 00 00 ];
+- 			interrupts = <23 2 24 2 28 2>;
++ 			interrupts = <35 2 36 2 40 2>;
+ 			interrupt-parent = <&mpic>;
+ 			phy-handle = <&phy3>;
+ 		};
+@@ -169,15 +166,15 @@
+ 			cell-index = <0>;
+ 			device_type = "serial";
+ 			compatible = "ns16550";
+-			reg = <4500 100>;
++			reg = <0x4500 0x100>;
+ 			clock-frequency = <0>;
+-			interrupts = <2a 2>;
++			interrupts = <42 2>;
+ 			interrupt-parent = <&mpic>;
+ 		};
+ 
+ 		global-utilities@e0000 {	//global utilities block
+ 			compatible = "fsl,mpc8548-guts";
+-			reg = <e0000 1000>;
++			reg = <0xe0000 0x1000>;
+ 			fsl,has-rstcr;
+ 		};
+ 
+@@ -185,9 +182,9 @@
+ 			cell-index = <1>;
+ 			device_type = "serial";
+ 			compatible = "ns16550";
+-			reg = <4600 100>;
++			reg = <0x4600 0x100>;
+ 			clock-frequency = <0>;
+-			interrupts = <2a 2>;
++			interrupts = <42 2>;
+ 			interrupt-parent = <&mpic>;
+ 		};
+ 
+@@ -195,13 +192,13 @@
+ 			device_type = "crypto";
+ 			model = "SEC2";
+ 			compatible = "talitos";
+-			reg = <30000 f000>;
+-			interrupts = <2d 2>;
++			reg = <0x30000 0xf000>;
++			interrupts = <45 2>;
+ 			interrupt-parent = <&mpic>;
+ 			num-channels = <4>;
+-			channel-fifo-len = <18>;
+-			exec-units-mask = <000000fe>;
+-			descriptor-types-mask = <012b0ebf>;
++			channel-fifo-len = <24>;
++			exec-units-mask = <0xfe>;
++			descriptor-types-mask = <0x12b0ebf>;
+ 		};
+ 
+ 		mpic: pic@40000 {
+@@ -209,73 +206,73 @@
+ 			interrupt-controller;
+ 			#address-cells = <0>;
+ 			#interrupt-cells = <2>;
+-			reg = <40000 40000>;
++			reg = <0x40000 0x40000>;
+ 			compatible = "chrp,open-pic";
+ 			device_type = "open-pic";
+                         big-endian;
+ 		};
+ 
+ 		par_io@e0100 {
+-			reg = <e0100 100>;
++			reg = <0xe0100 0x100>;
+ 			device_type = "par_io";
+ 			num-ports = <7>;
+ 
+ 			pio1: ucc_pin@01 {
+ 				pio-map = <
+ 			/* port  pin  dir  open_drain  assignment  has_irq */
+-					4  0a  1  0  2  0 	/* TxD0 */
+-					4  09  1  0  2  0 	/* TxD1 */
+-					4  08  1  0  2  0 	/* TxD2 */
+-					4  07  1  0  2  0 	/* TxD3 */
+-					4  17  1  0  2  0 	/* TxD4 */
+-					4  16  1  0  2  0 	/* TxD5 */
+-					4  15  1  0  2  0 	/* TxD6 */
+-					4  14  1  0  2  0 	/* TxD7 */
+-					4  0f  2  0  2  0 	/* RxD0 */
+-					4  0e  2  0  2  0 	/* RxD1 */
+-					4  0d  2  0  2  0 	/* RxD2 */
+-					4  0c  2  0  2  0 	/* RxD3 */
+-					4  1d  2  0  2  0 	/* RxD4 */
+-					4  1c  2  0  2  0 	/* RxD5 */
+-					4  1b  2  0  2  0 	/* RxD6 */
+-					4  1a  2  0  2  0 	/* RxD7 */
+-					4  0b  1  0  2  0 	/* TX_EN */
+-					4  18  1  0  2  0 	/* TX_ER */
+-					4  10  2  0  2  0 	/* RX_DV */
+-					4  1e  2  0  2  0 	/* RX_ER */
+-					4  11  2  0  2  0 	/* RX_CLK */
+-					4  13  1  0  2  0 	/* GTX_CLK */
+-					1  1f  2  0  3  0>;	/* GTX125 */
++					0x4  0xa  0x1  0x0  0x2  0x0 	/* TxD0 */
++					0x4  0x9  0x1  0x0  0x2  0x0 	/* TxD1 */
++					0x4  0x8  0x1  0x0  0x2  0x0 	/* TxD2 */
++					0x4  0x7  0x1  0x0  0x2  0x0 	/* TxD3 */
++					0x4  0x17  0x1  0x0  0x2  0x0 	/* TxD4 */
++					0x4  0x16  0x1  0x0  0x2  0x0 	/* TxD5 */
++					0x4  0x15  0x1  0x0  0x2  0x0 	/* TxD6 */
++					0x4  0x14  0x1  0x0  0x2  0x0 	/* TxD7 */
++					0x4  0xf  0x2  0x0  0x2  0x0 	/* RxD0 */
++					0x4  0xe  0x2  0x0  0x2  0x0 	/* RxD1 */
++					0x4  0xd  0x2  0x0  0x2  0x0 	/* RxD2 */
++					0x4  0xc  0x2  0x0  0x2  0x0 	/* RxD3 */
++					0x4  0x1d  0x2  0x0  0x2  0x0 	/* RxD4 */
++					0x4  0x1c  0x2  0x0  0x2  0x0 	/* RxD5 */
++					0x4  0x1b  0x2  0x0  0x2  0x0 	/* RxD6 */
++					0x4  0x1a  0x2  0x0  0x2  0x0 	/* RxD7 */
++					0x4  0xb  0x1  0x0  0x2  0x0 	/* TX_EN */
++					0x4  0x18  0x1  0x0  0x2  0x0 	/* TX_ER */
++					0x4  0x10  0x2  0x0  0x2  0x0 	/* RX_DV */
++					0x4  0x1e  0x2  0x0  0x2  0x0 	/* RX_ER */
++					0x4  0x11  0x2  0x0  0x2  0x0 	/* RX_CLK */
++					0x4  0x13  0x1  0x0  0x2  0x0 	/* GTX_CLK */
++					0x1  0x1f  0x2  0x0  0x3  0x0>;	/* GTX125 */
+ 			};
+ 
+ 			pio2: ucc_pin@02 {
+ 				pio-map = <
+ 			/* port  pin  dir  open_drain  assignment  has_irq */
+-					5  0a 1  0  2  0   /* TxD0 */
+-					5  09 1  0  2  0   /* TxD1 */
+-					5  08 1  0  2  0   /* TxD2 */
+-					5  07 1  0  2  0   /* TxD3 */
+-					5  17 1  0  2  0   /* TxD4 */
+-					5  16 1  0  2  0   /* TxD5 */
+-					5  15 1  0  2  0   /* TxD6 */
+-					5  14 1  0  2  0   /* TxD7 */
+-					5  0f 2  0  2  0   /* RxD0 */
+-					5  0e 2  0  2  0   /* RxD1 */
+-					5  0d 2  0  2  0   /* RxD2 */
+-					5  0c 2  0  2  0   /* RxD3 */
+-					5  1d 2  0  2  0   /* RxD4 */
+-					5  1c 2  0  2  0   /* RxD5 */
+-					5  1b 2  0  2  0   /* RxD6 */
+-					5  1a 2  0  2  0   /* RxD7 */
+-					5  0b 1  0  2  0   /* TX_EN */
+-					5  18 1  0  2  0   /* TX_ER */
+-					5  10 2  0  2  0   /* RX_DV */
+-					5  1e 2  0  2  0   /* RX_ER */
+-					5  11 2  0  2  0   /* RX_CLK */
+-					5  13 1  0  2  0   /* GTX_CLK */
+-					1  1f 2  0  3  0   /* GTX125 */
+-					4  06 3  0  2  0   /* MDIO */
+-					4  05 1  0  2  0>; /* MDC */
++					0x5  0xa 0x1  0x0  0x2  0x0   /* TxD0 */
++					0x5  0x9 0x1  0x0  0x2  0x0   /* TxD1 */
++					0x5  0x8 0x1  0x0  0x2  0x0   /* TxD2 */
++					0x5  0x7 0x1  0x0  0x2  0x0   /* TxD3 */
++					0x5  0x17 0x1  0x0  0x2  0x0   /* TxD4 */
++					0x5  0x16 0x1  0x0  0x2  0x0   /* TxD5 */
++					0x5  0x15 0x1  0x0  0x2  0x0   /* TxD6 */
++					0x5  0x14 0x1  0x0  0x2  0x0   /* TxD7 */
++					0x5  0xf 0x2  0x0  0x2  0x0   /* RxD0 */
++					0x5  0xe 0x2  0x0  0x2  0x0   /* RxD1 */
++					0x5  0xd 0x2  0x0  0x2  0x0   /* RxD2 */
++					0x5  0xc 0x2  0x0  0x2  0x0   /* RxD3 */
++					0x5  0x1d 0x2  0x0  0x2  0x0   /* RxD4 */
++					0x5  0x1c 0x2  0x0  0x2  0x0   /* RxD5 */
++					0x5  0x1b 0x2  0x0  0x2  0x0   /* RxD6 */
++					0x5  0x1a 0x2  0x0  0x2  0x0   /* RxD7 */
++					0x5  0xb 0x1  0x0  0x2  0x0   /* TX_EN */
++					0x5  0x18 0x1  0x0  0x2  0x0   /* TX_ER */
++					0x5  0x10 0x2  0x0  0x2  0x0   /* RX_DV */
++					0x5  0x1e 0x2  0x0  0x2  0x0   /* RX_ER */
++					0x5  0x11 0x2  0x0  0x2  0x0   /* RX_CLK */
++					0x5  0x13 0x1  0x0  0x2  0x0   /* GTX_CLK */
++					0x1  0x1f 0x2  0x0  0x3  0x0   /* GTX125 */
++					0x4  0x6 0x3  0x0  0x2  0x0   /* MDIO */
++					0x4  0x5 0x1  0x0  0x2  0x0>; /* MDC */
+ 			};
+ 		};
+ 	};
+@@ -285,28 +282,28 @@
+ 		#size-cells = <1>;
+ 		device_type = "qe";
+ 		compatible = "fsl,qe";
+-		ranges = <0 e0080000 00040000>;
+-		reg = <e0080000 480>;
++		ranges = <0x0 0xe0080000 0x40000>;
++		reg = <0xe0080000 0x480>;
+ 		brg-frequency = <0>;
+-		bus-frequency = <179A7B00>;
++		bus-frequency = <396000000>;
+ 
+ 		muram@10000 {
+  			#address-cells = <1>;
+  			#size-cells = <1>;
+ 			compatible = "fsl,qe-muram", "fsl,cpm-muram";
+-			ranges = <0 00010000 0000c000>;
++			ranges = <0x0 0x10000 0x10000>;
+ 
+ 			data-only@0 {
+ 				compatible = "fsl,qe-muram-data",
+ 					     "fsl,cpm-muram-data";
+-				reg = <0 c000>;
++				reg = <0x0 0x10000>;
+ 			};
+ 		};
+ 
+ 		spi@4c0 {
+ 			cell-index = <0>;
+ 			compatible = "fsl,spi";
+-			reg = <4c0 40>;
++			reg = <0x4c0 0x40>;
+ 			interrupts = <2>;
+ 			interrupt-parent = <&qeic>;
+ 			mode = "cpu";
+@@ -315,7 +312,7 @@
+ 		spi@500 {
+ 			cell-index = <1>;
+ 			compatible = "fsl,spi";
+-			reg = <500 40>;
++			reg = <0x500 0x40>;
+ 			interrupts = <1>;
+ 			interrupt-parent = <&qeic>;
+ 			mode = "cpu";
+@@ -324,11 +321,9 @@
+ 		enet2: ucc@2000 {
+ 			device_type = "network";
+ 			compatible = "ucc_geth";
+-			model = "UCC";
+ 			cell-index = <1>;
+-			device-id = <1>;
+-			reg = <2000 200>;
+-			interrupts = <20>;
++			reg = <0x2000 0x200>;
++			interrupts = <32>;
+ 			interrupt-parent = <&qeic>;
+ 			local-mac-address = [ 00 00 00 00 00 00 ];
+ 			rx-clock-name = "none";
+@@ -341,11 +336,9 @@
+ 		enet3: ucc@3000 {
+ 			device_type = "network";
+ 			compatible = "ucc_geth";
+-			model = "UCC";
+ 			cell-index = <2>;
+-			device-id = <2>;
+-			reg = <3000 200>;
+-			interrupts = <21>;
++			reg = <0x3000 0x200>;
++			interrupts = <33>;
+ 			interrupt-parent = <&qeic>;
+ 			local-mac-address = [ 00 00 00 00 00 00 ];
+ 			rx-clock-name = "none";
+@@ -358,7 +351,7 @@
+ 		mdio@2120 {
+ 			#address-cells = <1>;
+ 			#size-cells = <0>;
+-			reg = <2120 18>;
++			reg = <0x2120 0x18>;
+ 			compatible = "fsl,ucc-mdio";
+ 
+ 			/* These are the same PHYs as on
+@@ -366,25 +359,25 @@
+ 			qe_phy0: ethernet-phy@07 {
+ 				interrupt-parent = <&mpic>;
+ 				interrupts = <1 1>;
+-				reg = <7>;
++				reg = <0x7>;
+ 				device_type = "ethernet-phy";
+ 			};
+ 			qe_phy1: ethernet-phy@01 {
+ 				interrupt-parent = <&mpic>;
+ 				interrupts = <2 1>;
+-				reg = <1>;
++				reg = <0x1>;
+ 				device_type = "ethernet-phy";
+ 			};
+ 			qe_phy2: ethernet-phy@02 {
+ 				interrupt-parent = <&mpic>;
+ 				interrupts = <1 1>;
+-				reg = <2>;
++				reg = <0x2>;
+ 				device_type = "ethernet-phy";
+ 			};
+ 			qe_phy3: ethernet-phy@03 {
+ 				interrupt-parent = <&mpic>;
+ 				interrupts = <2 1>;
+-				reg = <3>;
++				reg = <0x3>;
+ 				device_type = "ethernet-phy";
+ 			};
+ 		};
+@@ -394,9 +387,9 @@
+ 			compatible = "fsl,qe-ic";
+ 			#address-cells = <0>;
+ 			#interrupt-cells = <1>;
+-			reg = <80 80>;
++			reg = <0x80 0x80>;
+ 			big-endian;
+-			interrupts = <2e 2 2e 2>; //high:30 low:30
++			interrupts = <46 2 46 2>; //high:30 low:30
+ 			interrupt-parent = <&mpic>;
+ 		};
+ 
+@@ -404,30 +397,30 @@
+ 
+ 	pci0: pci@e0008000 {
+ 		cell-index = <0>;
+-		interrupt-map-mask = <f800 0 0 7>;
++		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ 		interrupt-map = <
+ 			/* IDSEL 0x12 AD18 */
+-			9000 0 0 1 &mpic 5 1
+-			9000 0 0 2 &mpic 6 1
+-			9000 0 0 3 &mpic 7 1
+-			9000 0 0 4 &mpic 4 1
++			0x9000 0x0 0x0 0x1 &mpic 0x5 0x1
++			0x9000 0x0 0x0 0x2 &mpic 0x6 0x1
++			0x9000 0x0 0x0 0x3 &mpic 0x7 0x1
++			0x9000 0x0 0x0 0x4 &mpic 0x4 0x1
+ 
+ 			/* IDSEL 0x13 AD19 */
+-			9800 0 0 1 &mpic 6 1
+-			9800 0 0 2 &mpic 7 1
+-			9800 0 0 3 &mpic 4 1
+-			9800 0 0 4 &mpic 5 1>;
++			0x9800 0x0 0x0 0x1 &mpic 0x6 0x1
++			0x9800 0x0 0x0 0x2 &mpic 0x7 0x1
++			0x9800 0x0 0x0 0x3 &mpic 0x4 0x1
++			0x9800 0x0 0x0 0x4 &mpic 0x5 0x1>;
+ 
+ 		interrupt-parent = <&mpic>;
+-		interrupts = <18 2>;
+-		bus-range = <0 ff>;
+-		ranges = <02000000 0 80000000 80000000 0 20000000
+-			  01000000 0 00000000 e2000000 0 00800000>;
+-		clock-frequency = <3f940aa>;
++		interrupts = <24 2>;
++		bus-range = <0 255>;
++		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
++			  0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
++		clock-frequency = <66666666>;
+ 		#interrupt-cells = <1>;
+ 		#size-cells = <2>;
+ 		#address-cells = <3>;
+-		reg = <e0008000 1000>;
++		reg = <0xe0008000 0x1000>;
+ 		compatible = "fsl,mpc8540-pci";
+ 		device_type = "pci";
+ 	};
+@@ -435,39 +428,39 @@
+ 	/* PCI Express */
+ 	pci1: pcie@e000a000 {
+ 		cell-index = <2>;
+-		interrupt-map-mask = <f800 0 0 7>;
++		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ 		interrupt-map = <
+ 
+ 			/* IDSEL 0x0 (PEX) */
+-			00000 0 0 1 &mpic 0 1
+-			00000 0 0 2 &mpic 1 1
+-			00000 0 0 3 &mpic 2 1
+-			00000 0 0 4 &mpic 3 1>;
++			00000 0x0 0x0 0x1 &mpic 0x0 0x1
++			00000 0x0 0x0 0x2 &mpic 0x1 0x1
++			00000 0x0 0x0 0x3 &mpic 0x2 0x1
++			00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
+ 
+ 		interrupt-parent = <&mpic>;
+-		interrupts = <1a 2>;
+-		bus-range = <0 ff>;
+-		ranges = <02000000 0 a0000000 a0000000 0 10000000
+-			  01000000 0 00000000 e2800000 0 00800000>;
+-		clock-frequency = <1fca055>;
++		interrupts = <26 2>;
++		bus-range = <0 255>;
++		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
++			  0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
++		clock-frequency = <33333333>;
+ 		#interrupt-cells = <1>;
+ 		#size-cells = <2>;
+ 		#address-cells = <3>;
+-		reg = <e000a000 1000>;
++		reg = <0xe000a000 0x1000>;
+ 		compatible = "fsl,mpc8548-pcie";
+ 		device_type = "pci";
+ 		pcie@0 {
+-			reg = <0 0 0 0 0>;
++			reg = <0x0 0x0 0x0 0x0 0x0>;
+ 			#size-cells = <2>;
+ 			#address-cells = <3>;
+ 			device_type = "pci";
+-			ranges = <02000000 0 a0000000
+-				  02000000 0 a0000000
+-				  0 10000000
+-
+-				  01000000 0 00000000
+-				  01000000 0 00000000
+-				  0 00800000>;
++			ranges = <0x2000000 0x0 0xa0000000
++				  0x2000000 0x0 0xa0000000
++				  0x0 0x10000000
++
++				  0x1000000 0x0 0x0
++				  0x1000000 0x0 0x0
++				  0x0 0x800000>;
+ 		};
+ 	};
+ };
+--- a/arch/powerpc/boot/dts/mpc8572ds.dts
++++ b/arch/powerpc/boot/dts/mpc8572ds.dts
+@@ -1,7 +1,7 @@
+ /*
+  * MPC8572 DS Device Tree Source
+  *
+- * Copyright 2007 Freescale Semiconductor Inc.
++ * Copyright 2007, 2008 Freescale Semiconductor Inc.
+  *
+  * This program is free software; you can redistribute  it and/or modify it
+  * under  the terms of  the GNU General  Public License as published by the
+@@ -9,6 +9,7 @@
+  * option) any later version.
+  */
+ 
++/dts-v1/;
+ / {
+ 	model = "fsl,MPC8572DS";
+ 	compatible = "fsl,MPC8572DS";
+@@ -33,11 +34,11 @@
+ 
+ 		PowerPC,8572@0 {
+ 			device_type = "cpu";
+-			reg = <0>;
+-			d-cache-line-size = <20>;	// 32 bytes
+-			i-cache-line-size = <20>;	// 32 bytes
+-			d-cache-size = <8000>;		// L1, 32K
+-			i-cache-size = <8000>;		// L1, 32K
++			reg = <0x0>;
++			d-cache-line-size = <32>;	// 32 bytes
++			i-cache-line-size = <32>;	// 32 bytes
++			d-cache-size = <0x8000>;		// L1, 32K
++			i-cache-size = <0x8000>;		// L1, 32K
+ 			timebase-frequency = <0>;
+ 			bus-frequency = <0>;
+ 			clock-frequency = <0>;
+@@ -45,11 +46,11 @@
+ 
+ 		PowerPC,8572@1 {
+ 			device_type = "cpu";
+-			reg = <1>;
+-			d-cache-line-size = <20>;	// 32 bytes
+-			i-cache-line-size = <20>;	// 32 bytes
+-			d-cache-size = <8000>;		// L1, 32K
+-			i-cache-size = <8000>;		// L1, 32K
++			reg = <0x1>;
++			d-cache-line-size = <32>;	// 32 bytes
++			i-cache-line-size = <32>;	// 32 bytes
++			d-cache-size = <0x8000>;		// L1, 32K
++			i-cache-size = <0x8000>;		// L1, 32K
+ 			timebase-frequency = <0>;
+ 			bus-frequency = <0>;
+ 			clock-frequency = <0>;
+@@ -58,38 +59,38 @@
+ 
+ 	memory {
+ 		device_type = "memory";
+-		reg = <00000000 00000000>;	// Filled by U-Boot
++		reg = <0x0 0x0>;	// Filled by U-Boot
+ 	};
+ 
+ 	soc8572@ffe00000 {
+ 		#address-cells = <1>;
+ 		#size-cells = <1>;
+ 		device_type = "soc";
+-		ranges = <00000000 ffe00000 00100000>;
+-		reg = <ffe00000 00001000>;	// CCSRBAR & soc regs, remove once parse code for immrbase fixed
++		ranges = <0x0 0xffe00000 0x100000>;
++		reg = <0xffe00000 0x1000>;	// CCSRBAR & soc regs, remove once parse code for immrbase fixed
+ 		bus-frequency = <0>;		// Filled out by uboot.
+ 
+ 		memory-controller@2000 {
+ 			compatible = "fsl,mpc8572-memory-controller";
+-			reg = <2000 1000>;
++			reg = <0x2000 0x1000>;
+ 			interrupt-parent = <&mpic>;
+-			interrupts = <12 2>;
++			interrupts = <18 2>;
+ 		};
+ 
+ 		memory-controller@6000 {
+ 			compatible = "fsl,mpc8572-memory-controller";
+-			reg = <6000 1000>;
++			reg = <0x6000 0x1000>;
+ 			interrupt-parent = <&mpic>;
+-			interrupts = <12 2>;
++			interrupts = <18 2>;
+ 		};
+ 
+ 		l2-cache-controller@20000 {
+ 			compatible = "fsl,mpc8572-l2-cache-controller";
+-			reg = <20000 1000>;
+-			cache-line-size = <20>;	// 32 bytes
+-			cache-size = <80000>;	// L2, 512K
++			reg = <0x20000 0x1000>;
++			cache-line-size = <32>;	// 32 bytes
++			cache-size = <0x80000>;	// L2, 512K
+ 			interrupt-parent = <&mpic>;
+-			interrupts = <10 2>;
++			interrupts = <16 2>;
+ 		};
+ 
+ 		i2c@3000 {
+@@ -97,8 +98,8 @@
+ 			#size-cells = <0>;
+ 			cell-index = <0>;
+ 			compatible = "fsl-i2c";
+-			reg = <3000 100>;
+-			interrupts = <2b 2>;
++			reg = <0x3000 0x100>;
++			interrupts = <43 2>;
+ 			interrupt-parent = <&mpic>;
+ 			dfsrr;
+ 		};
+@@ -108,8 +109,8 @@
+ 			#size-cells = <0>;
+ 			cell-index = <1>;
+ 			compatible = "fsl-i2c";
+-			reg = <3100 100>;
+-			interrupts = <2b 2>;
++			reg = <0x3100 0x100>;
++			interrupts = <43 2>;
+ 			interrupt-parent = <&mpic>;
+ 			dfsrr;
+ 		};
+@@ -118,27 +119,27 @@
+ 			#address-cells = <1>;
+ 			#size-cells = <0>;
+ 			compatible = "fsl,gianfar-mdio";
+-			reg = <24520 20>;
++			reg = <0x24520 0x20>;
+ 
+ 			phy0: ethernet-phy@0 {
+ 				interrupt-parent = <&mpic>;
+-				interrupts = <a 1>;
+-				reg = <0>;
++				interrupts = <10 1>;
++				reg = <0x0>;
+ 			};
+ 			phy1: ethernet-phy@1 {
+ 				interrupt-parent = <&mpic>;
+-				interrupts = <a 1>;
+-				reg = <1>;
++				interrupts = <10 1>;
++				reg = <0x1>;
+ 			};
+ 			phy2: ethernet-phy@2 {
+ 				interrupt-parent = <&mpic>;
+-				interrupts = <a 1>;
+-				reg = <2>;
++				interrupts = <10 1>;
++				reg = <0x2>;
+ 			};
+ 			phy3: ethernet-phy@3 {
+ 				interrupt-parent = <&mpic>;
+-				interrupts = <a 1>;
+-				reg = <3>;
++				interrupts = <10 1>;
++				reg = <0x3>;
+ 			};
+ 		};
+ 
+@@ -147,9 +148,9 @@
+ 			device_type = "network";
+ 			model = "eTSEC";
+ 			compatible = "gianfar";
+-			reg = <24000 1000>;
++			reg = <0x24000 0x1000>;
+ 			local-mac-address = [ 00 00 00 00 00 00 ];
+-			interrupts = <1d 2 1e 2 22 2>;
++			interrupts = <29 2 30 2 34 2>;
+ 			interrupt-parent = <&mpic>;
+ 			phy-handle = <&phy0>;
+ 			phy-connection-type = "rgmii-id";
+@@ -160,9 +161,9 @@
+ 			device_type = "network";
+ 			model = "eTSEC";
+ 			compatible = "gianfar";
+-			reg = <25000 1000>;
++			reg = <0x25000 0x1000>;
+ 			local-mac-address = [ 00 00 00 00 00 00 ];
+-			interrupts = <23 2 24 2 28 2>;
++			interrupts = <35 2 36 2 40 2>;
+ 			interrupt-parent = <&mpic>;
+ 			phy-handle = <&phy1>;
+ 			phy-connection-type = "rgmii-id";
+@@ -173,9 +174,9 @@
+ 			device_type = "network";
+ 			model = "eTSEC";
+ 			compatible = "gianfar";
+-			reg = <26000 1000>;
++			reg = <0x26000 0x1000>;
+ 			local-mac-address = [ 00 00 00 00 00 00 ];
+-			interrupts = <1f 2 20 2 21 2>;
++			interrupts = <31 2 32 2 33 2>;
+ 			interrupt-parent = <&mpic>;
+ 			phy-handle = <&phy2>;
+ 			phy-connection-type = "rgmii-id";
+@@ -186,9 +187,9 @@
+ 			device_type = "network";
+ 			model = "eTSEC";
+ 			compatible = "gianfar";
+-			reg = <27000 1000>;
++			reg = <0x27000 0x1000>;
+ 			local-mac-address = [ 00 00 00 00 00 00 ];
+-			interrupts = <25 2 26 2 27 2>;
++			interrupts = <37 2 38 2 39 2>;
+ 			interrupt-parent = <&mpic>;
+ 			phy-handle = <&phy3>;
+ 			phy-connection-type = "rgmii-id";
+@@ -198,9 +199,9 @@
+ 			cell-index = <0>;
+ 			device_type = "serial";
+ 			compatible = "ns16550";
+-			reg = <4500 100>;
++			reg = <0x4500 0x100>;
+ 			clock-frequency = <0>;
+-			interrupts = <2a 2>;
++			interrupts = <42 2>;
+ 			interrupt-parent = <&mpic>;
+ 		};
+ 
+@@ -208,15 +209,15 @@
+ 			cell-index = <1>;
+ 			device_type = "serial";
+ 			compatible = "ns16550";
+-			reg = <4600 100>;
++			reg = <0x4600 0x100>;
+ 			clock-frequency = <0>;
+-			interrupts = <2a 2>;
++			interrupts = <42 2>;
+ 			interrupt-parent = <&mpic>;
+ 		};
+ 
+ 		global-utilities@e0000 {	//global utilities block
+ 			compatible = "fsl,mpc8572-guts";
+-			reg = <e0000 1000>;
++			reg = <0xe0000 0x1000>;
+ 			fsl,has-rstcr;
+ 		};
+ 
+@@ -225,7 +226,7 @@
+ 			interrupt-controller;
+ 			#address-cells = <0>;
+ 			#interrupt-cells = <2>;
+-			reg = <40000 40000>;
++			reg = <0x40000 0x40000>;
+ 			compatible = "chrp,open-pic";
+ 			device_type = "open-pic";
+ 			big-endian;
+@@ -239,167 +240,167 @@
+ 		#interrupt-cells = <1>;
+ 		#size-cells = <2>;
+ 		#address-cells = <3>;
+-		reg = <ffe08000 1000>;
+-		bus-range = <0 ff>;
+-		ranges = <02000000 0 80000000 80000000 0 20000000
+-			  01000000 0 00000000 ffc00000 0 00010000>;
+-		clock-frequency = <1fca055>;
++		reg = <0xffe08000 0x1000>;
++		bus-range = <0 255>;
++		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
++			  0x1000000 0x0 0x0 0xffc00000 0x0 0x10000>;
++		clock-frequency = <33333333>;
+ 		interrupt-parent = <&mpic>;
+-		interrupts = <18 2>;
+-		interrupt-map-mask = <ff00 0 0 7>;
++		interrupts = <24 2>;
++		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+ 		interrupt-map = <
+ 			/* IDSEL 0x11 func 0 - PCI slot 1 */
+-			8800 0 0 1 &mpic 2 1
+-			8800 0 0 2 &mpic 3 1
+-			8800 0 0 3 &mpic 4 1
+-			8800 0 0 4 &mpic 1 1
++			0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
++			0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
++			0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
++			0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
+ 
+ 			/* IDSEL 0x11 func 1 - PCI slot 1 */
+-			8900 0 0 1 &mpic 2 1
+-			8900 0 0 2 &mpic 3 1
+-			8900 0 0 3 &mpic 4 1
+-			8900 0 0 4 &mpic 1 1
++			0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
++			0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
++			0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
++			0x8900 0x0 0x0 0x4 &mpic 0x1 0x1
+ 
+ 			/* IDSEL 0x11 func 2 - PCI slot 1 */
+-			8a00 0 0 1 &mpic 2 1
+-			8a00 0 0 2 &mpic 3 1
+-			8a00 0 0 3 &mpic 4 1
+-			8a00 0 0 4 &mpic 1 1
++			0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
++			0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
++			0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
++			0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1
+ 
+ 			/* IDSEL 0x11 func 3 - PCI slot 1 */
+-			8b00 0 0 1 &mpic 2 1
+-			8b00 0 0 2 &mpic 3 1
+-			8b00 0 0 3 &mpic 4 1
+-			8b00 0 0 4 &mpic 1 1
++			0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
++			0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
++			0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
++			0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1
+ 
+ 			/* IDSEL 0x11 func 4 - PCI slot 1 */
+-			8c00 0 0 1 &mpic 2 1
+-			8c00 0 0 2 &mpic 3 1
+-			8c00 0 0 3 &mpic 4 1
+-			8c00 0 0 4 &mpic 1 1
++			0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
++			0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
++			0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
++			0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1
+ 
+ 			/* IDSEL 0x11 func 5 - PCI slot 1 */
+-			8d00 0 0 1 &mpic 2 1
+-			8d00 0 0 2 &mpic 3 1
+-			8d00 0 0 3 &mpic 4 1
+-			8d00 0 0 4 &mpic 1 1
++			0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
++			0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
++			0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
++			0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1
+ 
+ 			/* IDSEL 0x11 func 6 - PCI slot 1 */
+-			8e00 0 0 1 &mpic 2 1
+-			8e00 0 0 2 &mpic 3 1
+-			8e00 0 0 3 &mpic 4 1
+-			8e00 0 0 4 &mpic 1 1
++			0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
++			0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
++			0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
++			0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1
+ 
+ 			/* IDSEL 0x11 func 7 - PCI slot 1 */
+-			8f00 0 0 1 &mpic 2 1
+-			8f00 0 0 2 &mpic 3 1
+-			8f00 0 0 3 &mpic 4 1
+-			8f00 0 0 4 &mpic 1 1
++			0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
++			0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
++			0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
++			0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1
+ 
+ 			/* IDSEL 0x12 func 0 - PCI slot 2 */
+-			9000 0 0 1 &mpic 3 1
+-			9000 0 0 2 &mpic 4 1
+-			9000 0 0 3 &mpic 1 1
+-			9000 0 0 4 &mpic 2 1
++			0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
++			0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
++			0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
++			0x9000 0x0 0x0 0x4 &mpic 0x2 0x1
+ 
+ 			/* IDSEL 0x12 func 1 - PCI slot 2 */
+-			9100 0 0 1 &mpic 3 1
+-			9100 0 0 2 &mpic 4 1
+-			9100 0 0 3 &mpic 1 1
+-			9100 0 0 4 &mpic 2 1
++			0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
++			0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
++			0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
++			0x9100 0x0 0x0 0x4 &mpic 0x2 0x1
+ 
+ 			/* IDSEL 0x12 func 2 - PCI slot 2 */
+-			9200 0 0 1 &mpic 3 1
+-			9200 0 0 2 &mpic 4 1
+-			9200 0 0 3 &mpic 1 1
+-			9200 0 0 4 &mpic 2 1
++			0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
++			0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
++			0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
++			0x9200 0x0 0x0 0x4 &mpic 0x2 0x1
+ 
+ 			/* IDSEL 0x12 func 3 - PCI slot 2 */
+-			9300 0 0 1 &mpic 3 1
+-			9300 0 0 2 &mpic 4 1
+-			9300 0 0 3 &mpic 1 1
+-			9300 0 0 4 &mpic 2 1
++			0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
++			0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
++			0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
++			0x9300 0x0 0x0 0x4 &mpic 0x2 0x1
+ 
+ 			/* IDSEL 0x12 func 4 - PCI slot 2 */
+-			9400 0 0 1 &mpic 3 1
+-			9400 0 0 2 &mpic 4 1
+-			9400 0 0 3 &mpic 1 1
+-			9400 0 0 4 &mpic 2 1
++			0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
++			0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
++			0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
++			0x9400 0x0 0x0 0x4 &mpic 0x2 0x1
+ 
+ 			/* IDSEL 0x12 func 5 - PCI slot 2 */
+-			9500 0 0 1 &mpic 3 1
+-			9500 0 0 2 &mpic 4 1
+-			9500 0 0 3 &mpic 1 1
+-			9500 0 0 4 &mpic 2 1
++			0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
++			0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
++			0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
++			0x9500 0x0 0x0 0x4 &mpic 0x2 0x1
+ 
+ 			/* IDSEL 0x12 func 6 - PCI slot 2 */
+-			9600 0 0 1 &mpic 3 1
+-			9600 0 0 2 &mpic 4 1
+-			9600 0 0 3 &mpic 1 1
+-			9600 0 0 4 &mpic 2 1
++			0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
++			0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
++			0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
++			0x9600 0x0 0x0 0x4 &mpic 0x2 0x1
+ 
+ 			/* IDSEL 0x12 func 7 - PCI slot 2 */
+-			9700 0 0 1 &mpic 3 1
+-			9700 0 0 2 &mpic 4 1
+-			9700 0 0 3 &mpic 1 1
+-			9700 0 0 4 &mpic 2 1
++			0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
++			0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
++			0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
++			0x9700 0x0 0x0 0x4 &mpic 0x2 0x1
+ 
+ 			// IDSEL 0x1c  USB
+-			e000 0 0 1 &i8259 c 2
+-			e100 0 0 2 &i8259 9 2
+-			e200 0 0 3 &i8259 a 2
+-			e300 0 0 4 &i8259 b 2
++			0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
++			0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
++			0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
++			0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
+ 
+ 			// IDSEL 0x1d  Audio
+-			e800 0 0 1 &i8259 6 2
++			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+ 
+ 			// IDSEL 0x1e Legacy
+-			f000 0 0 1 &i8259 7 2
+-			f100 0 0 1 &i8259 7 2
++			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
++			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+ 
+ 			// IDSEL 0x1f IDE/SATA
+-			f800 0 0 1 &i8259 e 2
+-			f900 0 0 1 &i8259 5 2
++			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
++			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+ 
+ 			>;
+ 
+ 		pcie@0 {
+-			reg = <0 0 0 0 0>;
++			reg = <0x0 0x0 0x0 0x0 0x0>;
+ 			#size-cells = <2>;
+ 			#address-cells = <3>;
+ 			device_type = "pci";
+-			ranges = <02000000 0 80000000
+-				  02000000 0 80000000
+-				  0 20000000
+-
+-				  01000000 0 00000000
+-				  01000000 0 00000000
+-				  0 00100000>;
++			ranges = <0x2000000 0x0 0x80000000
++				  0x2000000 0x0 0x80000000
++				  0x0 0x20000000
++
++				  0x1000000 0x0 0x0
++				  0x1000000 0x0 0x0
++				  0x0 0x100000>;
+ 			uli1575@0 {
+-				reg = <0 0 0 0 0>;
++				reg = <0x0 0x0 0x0 0x0 0x0>;
+ 				#size-cells = <2>;
+ 				#address-cells = <3>;
+-				ranges = <02000000 0 80000000
+-					  02000000 0 80000000
+-					  0 20000000
+-
+-					  01000000 0 00000000
+-					  01000000 0 00000000
+-					  0 00100000>;
++				ranges = <0x2000000 0x0 0x80000000
++					  0x2000000 0x0 0x80000000
++					  0x0 0x20000000
++
++					  0x1000000 0x0 0x0
++					  0x1000000 0x0 0x0
++					  0x0 0x100000>;
+ 				isa@1e {
+ 					device_type = "isa";
+ 					#interrupt-cells = <2>;
+ 					#size-cells = <1>;
+ 					#address-cells = <2>;
+-					reg = <f000 0 0 0 0>;
+-					ranges = <1 0 01000000 0 0
+-						  00001000>;
++					reg = <0xf000 0x0 0x0 0x0 0x0>;
++					ranges = <0x1 0x0 0x1000000 0x0 0x0
++						  0x1000>;
+ 					interrupt-parent = <&i8259>;
+ 
+ 					i8259: interrupt-controller@20 {
+-						reg = <1 20 2
+-						       1 a0 2
+-						       1 4d0 2>;
++						reg = <0x1 0x20 0x2
++						       0x1 0xa0 0x2
++						       0x1 0x4d0 0x2>;
+ 						interrupt-controller;
+ 						device_type = "interrupt-controller";
+ 						#address-cells = <0>;
+@@ -412,29 +413,29 @@
+ 					i8042@60 {
+ 						#size-cells = <0>;
+ 						#address-cells = <1>;
+-						reg = <1 60 1 1 64 1>;
+-						interrupts = <1 3 c 3>;
++						reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
++						interrupts = <1 3 12 3>;
+ 						interrupt-parent =
+ 							<&i8259>;
+ 
+ 						keyboard@0 {
+-							reg = <0>;
++							reg = <0x0>;
+ 							compatible = "pnpPNP,303";
+ 						};
+ 
+ 						mouse@1 {
+-							reg = <1>;
++							reg = <0x1>;
+ 							compatible = "pnpPNP,f03";
+ 						};
+ 					};
+ 
+ 					rtc@70 {
+ 						compatible = "pnpPNP,b00";
+-						reg = <1 70 2>;
++						reg = <0x1 0x70 0x2>;
+ 					};
+ 
+ 					gpio@400 {
+-						reg = <1 400 80>;
++						reg = <0x1 0x400 0x80>;
+ 					};
+ 				};
+ 			};
+@@ -449,33 +450,33 @@
+ 		#interrupt-cells = <1>;
+ 		#size-cells = <2>;
+ 		#address-cells = <3>;
+-		reg = <ffe09000 1000>;
+-		bus-range = <0 ff>;
+-		ranges = <02000000 0 a0000000 a0000000 0 20000000
+-			  01000000 0 00000000 ffc10000 0 00010000>;
+-		clock-frequency = <1fca055>;
++		reg = <0xffe09000 0x1000>;
++		bus-range = <0 255>;
++		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
++			  0x1000000 0x0 0x0 0xffc10000 0x0 0x10000>;
++		clock-frequency = <33333333>;
+ 		interrupt-parent = <&mpic>;
+-		interrupts = <1a 2>;
+-		interrupt-map-mask = <f800 0 0 7>;
++		interrupts = <26 2>;
++		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ 		interrupt-map = <
+ 			/* IDSEL 0x0 */
+-			0000 0 0 1 &mpic 4 1
+-			0000 0 0 2 &mpic 5 1
+-			0000 0 0 3 &mpic 6 1
+-			0000 0 0 4 &mpic 7 1
++			0000 0x0 0x0 0x1 &mpic 0x4 0x1
++			0000 0x0 0x0 0x2 &mpic 0x5 0x1
++			0000 0x0 0x0 0x3 &mpic 0x6 0x1
++			0000 0x0 0x0 0x4 &mpic 0x7 0x1
+ 			>;
+ 		pcie@0 {
+-			reg = <0 0 0 0 0>;
++			reg = <0x0 0x0 0x0 0x0 0x0>;
+ 			#size-cells = <2>;
+ 			#address-cells = <3>;
+ 			device_type = "pci";
+-			ranges = <02000000 0 a0000000
+-				  02000000 0 a0000000
+-				  0 20000000
+-
+-				  01000000 0 00000000
+-				  01000000 0 00000000
+-				  0 00100000>;
++			ranges = <0x2000000 0x0 0xa0000000
++				  0x2000000 0x0 0xa0000000
++				  0x0 0x20000000
++
++				  0x1000000 0x0 0x0
++				  0x1000000 0x0 0x0
++				  0x0 0x100000>;
+ 		};
+ 	};
+ 
+@@ -486,33 +487,33 @@
+ 		#interrupt-cells = <1>;
+ 		#size-cells = <2>;
+ 		#address-cells = <3>;
+-		reg = <ffe0a000 1000>;
+-		bus-range = <0 ff>;
+-		ranges = <02000000 0 c0000000 c0000000 0 20000000
+-			  01000000 0 00000000 ffc20000 0 00010000>;
+-		clock-frequency = <1fca055>;
++		reg = <0xffe0a000 0x1000>;
++		bus-range = <0 255>;
++		ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
++			  0x1000000 0x0 0x0 0xffc20000 0x0 0x10000>;
++		clock-frequency = <33333333>;
+ 		interrupt-parent = <&mpic>;
+-		interrupts = <1b 2>;
+-		interrupt-map-mask = <f800 0 0 7>;
++		interrupts = <27 2>;
++		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ 		interrupt-map = <
+ 			/* IDSEL 0x0 */
+-			0000 0 0 1 &mpic 0 1
+-			0000 0 0 2 &mpic 1 1
+-			0000 0 0 3 &mpic 2 1
+-			0000 0 0 4 &mpic 3 1
++			0000 0x0 0x0 0x1 &mpic 0x0 0x1
++			0000 0x0 0x0 0x2 &mpic 0x1 0x1
++			0000 0x0 0x0 0x3 &mpic 0x2 0x1
++			0000 0x0 0x0 0x4 &mpic 0x3 0x1
+ 			>;
+ 		pcie@0 {
+-			reg = <0 0 0 0 0>;
++			reg = <0x0 0x0 0x0 0x0 0x0>;
+ 			#size-cells = <2>;
+ 			#address-cells = <3>;
+ 			device_type = "pci";
+-			ranges = <02000000 0 c0000000
+-				  02000000 0 c0000000
+-				  0 20000000
+-
+-				  01000000 0 00000000
+-				  01000000 0 00000000
+-				  0 00100000>;
++			ranges = <0x2000000 0x0 0xc0000000
++				  0x2000000 0x0 0xc0000000
++				  0x0 0x20000000
++
++				  0x1000000 0x0 0x0
++				  0x1000000 0x0 0x0
++				  0x0 0x100000>;
+ 		};
+ 	};
+ };
+--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
++++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+@@ -13,7 +13,7 @@
+ 
+ / {
+ 	model = "MPC8641HPCN";
+-	compatible = "mpc86xx";
++	compatible = "fsl,mpc8641hpcn";
+ 	#address-cells = <1>;
+ 	#size-cells = <1>;
+ 
+--- a/arch/powerpc/boot/dts/mpc866ads.dts
++++ b/arch/powerpc/boot/dts/mpc866ads.dts
+@@ -2,6 +2,7 @@
+  * MPC866 ADS Device Tree Source
+  *
+  * Copyright 2006 MontaVista Software, Inc.
++ * Copyright 2008 Freescale Semiconductor, Inc.
+  *
+  * This program is free software; you can redistribute  it and/or modify it
+  * under  the terms of  the GNU General  Public License as published by the
+@@ -9,6 +10,7 @@
+  * option) any later version.
+  */
+ 
++/dts-v1/;
+ 
+ / {
+ 	model = "MPC866ADS";
+@@ -22,37 +24,37 @@
+ 
+ 		PowerPC,866@0 {
+ 			device_type = "cpu";
+-			reg = <0>;
+-			d-cache-line-size = <10>;	// 16 bytes
+-			i-cache-line-size = <10>;	// 16 bytes
+-			d-cache-size = <2000>;		// L1, 8K
+-			i-cache-size = <4000>;		// L1, 16K
++			reg = <0x0>;
++			d-cache-line-size = <16>;	// 16 bytes
++			i-cache-line-size = <16>;	// 16 bytes
++			d-cache-size = <0x2000>;		// L1, 8K
++			i-cache-size = <0x4000>;		// L1, 16K
+ 			timebase-frequency = <0>;
+ 			bus-frequency = <0>;
+ 			clock-frequency = <0>;
+-			interrupts = <f 2>;	// decrementer interrupt
++			interrupts = <15 2>;	// decrementer interrupt
+ 			interrupt-parent = <&PIC>;
+ 		};
+ 	};
+ 
+ 	memory {
+ 		device_type = "memory";
+-		reg = <00000000 800000>;
++		reg = <0x0 0x800000>;
+ 	};
+ 
+ 	localbus@ff000100 {
+ 		compatible = "fsl,mpc866-localbus", "fsl,pq1-localbus";
+ 		#address-cells = <2>;
+ 		#size-cells = <1>;
+-		reg = <ff000100 40>;
++		reg = <0xff000100 0x40>;
+ 
+ 		ranges = <
+-			1 0 ff080000 00008000
+-			5 0 ff0a0000 00008000
++			0x1 0x0 0xff080000 0x8000
++			0x5 0x0 0xff0a0000 0x8000
+ 		>;
+ 
+ 		board-control@1,0 {
+-			reg = <1 0 20 5 300 4>;
++			reg = <0x1 0x0 0x20 0x5 0x300 0x4>;
+ 			compatible = "fsl,mpc866ads-bcsr";
+ 		};
+ 	};
+@@ -61,17 +63,17 @@
+ 		#address-cells = <1>;
+ 		#size-cells = <1>;
+ 		device_type = "soc";
+-		ranges = <0 ff000000 00100000>;
+-		reg = <ff000000 00000200>;
++		ranges = <0x0 0xff000000 0x100000>;
++		reg = <0xff000000 0x200>;
+ 		bus-frequency = <0>;
+ 
+ 		mdio@e00 {
+ 			compatible = "fsl,mpc866-fec-mdio", "fsl,pq1-fec-mdio";
+-			reg = <e00 188>;
++			reg = <0xe00 0x188>;
+ 			#address-cells = <1>;
+ 			#size-cells = <0>;
+ 			PHY: ethernet-phy@f {
+-				reg = <f>;
++				reg = <0xf>;
+ 				device_type = "ethernet-phy";
+ 			};
+ 		};
+@@ -80,7 +82,7 @@
+ 			device_type = "network";
+ 			compatible = "fsl,mpc866-fec-enet",
+ 			             "fsl,pq1-fec-enet";
+-			reg = <e00 188>;
++			reg = <0xe00 0x188>;
+ 			local-mac-address = [ 00 00 00 00 00 00 ];
+ 			interrupts = <3 1>;
+ 			interrupt-parent = <&PIC>;
+@@ -91,7 +93,7 @@
+ 		PIC: pic@0 {
+ 			interrupt-controller;
+ 			#interrupt-cells = <2>;
+-			reg = <0 24>;
++			reg = <0x0 0x24>;
+ 			compatible = "fsl,mpc866-pic", "fsl,pq1-pic";
+ 		};
+ 
+@@ -100,7 +102,7 @@
+ 			#size-cells = <1>;
+ 			compatible = "fsl,mpc866-cpm", "fsl,cpm1";
+ 			ranges;
+-			reg = <9c0 40>;
++			reg = <0x9c0 0x40>;
+ 			brg-frequency = <0>;
+ 			interrupts = <0 2>;	// cpm error interrupt
+ 			interrupt-parent = <&CPM_PIC>;
+@@ -108,11 +110,11 @@
+ 			muram@2000 {
+ 				#address-cells = <1>;
+ 				#size-cells = <1>;
+-				ranges = <0 2000 2000>;
++				ranges = <0x0 0x2000 0x2000>;
+ 
+ 				data@0 {
+ 					compatible = "fsl,cpm-muram-data";
+-					reg = <0 1c00>;
++					reg = <0x0 0x1c00>;
+ 				};
+ 			};
+ 
+@@ -120,7 +122,7 @@
+ 				compatible = "fsl,mpc866-brg",
+ 					     "fsl,cpm1-brg",
+ 					     "fsl,cpm-brg";
+-				reg = <9f0 10>;
++				reg = <0x9f0 0x10>;
+ 				clock-frequency = <0>;
+ 			};
+ 
+@@ -130,7 +132,7 @@
+ 				#interrupt-cells = <1>;
+ 				interrupts = <5 2 0 2>;
+ 				interrupt-parent = <&PIC>;
+-				reg = <930 20>;
++				reg = <0x930 0x20>;
+ 				compatible = "fsl,mpc866-cpm-pic",
+ 				             "fsl,cpm1-pic";
+ 			};
+@@ -140,31 +142,31 @@
+ 				device_type = "serial";
+ 				compatible = "fsl,mpc866-smc-uart",
+ 				             "fsl,cpm1-smc-uart";
+-				reg = <a80 10 3e80 40>;
++				reg = <0xa80 0x10 0x3e80 0x40>;
+ 				interrupts = <4>;
+ 				interrupt-parent = <&CPM_PIC>;
+ 				fsl,cpm-brg = <1>;
+-				fsl,cpm-command = <0090>;
++				fsl,cpm-command = <0x90>;
+ 			};
+ 
+ 			serial@a90 {
+ 				device_type = "serial";
+ 				compatible = "fsl,mpc866-smc-uart",
+ 				             "fsl,cpm1-smc-uart";
+-				reg = <a90 10 3f80 40>;
++				reg = <0xa90 0x10 0x3f80 0x40>;
+ 				interrupts = <3>;
+ 				interrupt-parent = <&CPM_PIC>;
+ 				fsl,cpm-brg = <2>;
+-				fsl,cpm-command = <00d0>;
++				fsl,cpm-command = <0xd0>;
+ 			};
+ 
+ 			ethernet@a00 {
+ 				device_type = "network";
+ 				compatible = "fsl,mpc866-scc-enet",
+ 				             "fsl,cpm1-scc-enet";
+-				reg = <a00 18 3c00 100>;
++				reg = <0xa00 0x18 0x3c00 0x100>;
+ 				local-mac-address = [ 00 00 00 00 00 00 ];
+-				interrupts = <1e>;
++				interrupts = <30>;
+ 				interrupt-parent = <&CPM_PIC>;
+ 				fsl,cpm-command = <0000>;
+ 				linux,network-index = <1>;
+--- a/arch/powerpc/boot/dts/mpc885ads.dts
++++ b/arch/powerpc/boot/dts/mpc885ads.dts
+@@ -2,7 +2,7 @@
+  * MPC885 ADS Device Tree Source
+  *
+  * Copyright 2006 MontaVista Software, Inc.
+- * Copyright 2007 Freescale Semiconductor, Inc.
++ * Copyright 2007,2008 Freescale Semiconductor, Inc.
+  *
+  * This program is free software; you can redistribute  it and/or modify it
+  * under  the terms of  the GNU General  Public License as published by the
+@@ -10,6 +10,7 @@
+  * option) any later version.
+  */
+ 
++/dts-v1/;
+ 
+ / {
+ 	model = "MPC885ADS";
+@@ -23,45 +24,45 @@
+ 
+ 		PowerPC,885@0 {
+ 			device_type = "cpu";
+-			reg = <0>;
+-			d-cache-line-size = <d#16>;
+-			i-cache-line-size = <d#16>;
+-			d-cache-size = <d#8192>;
+-			i-cache-size = <d#8192>;
++			reg = <0x0>;
++			d-cache-line-size = <16>;
++			i-cache-line-size = <16>;
++			d-cache-size = <8192>;
++			i-cache-size = <8192>;
+ 			timebase-frequency = <0>;
+ 			bus-frequency = <0>;
+ 			clock-frequency = <0>;
+-			interrupts = <f 2>;	// decrementer interrupt
++			interrupts = <15 2>;	// decrementer interrupt
+ 			interrupt-parent = <&PIC>;
+ 		};
+ 	};
+ 
+ 	memory {
+ 		device_type = "memory";
+-		reg = <0 0>;
++		reg = <0x0 0x0>;
+ 	};
+ 
+ 	localbus@ff000100 {
+ 		compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus";
+ 		#address-cells = <2>;
+ 		#size-cells = <1>;
+-		reg = <ff000100 40>;
++		reg = <0xff000100 0x40>;
+ 
+ 		ranges = <
+-			0 0 fe000000 00800000
+-			1 0 ff080000 00008000
+-			5 0 ff0a0000 00008000
++			0x0 0x0 0xfe000000 0x800000
++			0x1 0x0 0xff080000 0x8000
++			0x5 0x0 0xff0a0000 0x8000
+ 		>;
+ 
+ 		flash@0,0 {
+ 			compatible = "jedec-flash";
+-			reg = <0 0 800000>;
++			reg = <0x0 0x0 0x800000>;
+ 			bank-width = <4>;
+ 			device-width = <1>;
+ 		};
+ 
+ 		board-control@1,0 {
+-			reg = <1 0 20 5 300 4>;
++			reg = <0x1 0x0 0x20 0x5 0x300 0x4>;
+ 			compatible = "fsl,mpc885ads-bcsr";
+ 		};
+ 	};
+@@ -71,30 +72,30 @@
+ 		#address-cells = <1>;
+ 		#size-cells = <1>;
+ 		device_type = "soc";
+-		ranges = <0 ff000000 00004000>;
++		ranges = <0x0 0xff000000 0x4000>;
+ 		bus-frequency = <0>;
+ 
+ 		// Temporary -- will go away once kernel uses ranges for get_immrbase().
+-		reg = <ff000000 4000>;
++		reg = <0xff000000 0x4000>;
+ 
+ 		mdio@e00 {
+ 			compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio";
+-			reg = <e00 188>;
++			reg = <0xe00 0x188>;
+ 			#address-cells = <1>;
+ 			#size-cells = <0>;
+ 
+ 			PHY0: ethernet-phy@0 {
+-				reg = <0>;
++				reg = <0x0>;
+ 				device_type = "ethernet-phy";
+ 			};
+ 
+ 			PHY1: ethernet-phy@1 {
+-				reg = <1>;
++				reg = <0x1>;
+ 				device_type = "ethernet-phy";
+ 			};
+ 
+ 			PHY2: ethernet-phy@2 {
+-				reg = <2>;
++				reg = <0x2>;
+ 				device_type = "ethernet-phy";
+ 			};
+ 		};
+@@ -103,7 +104,7 @@
+ 			device_type = "network";
+ 			compatible = "fsl,mpc885-fec-enet",
+ 			             "fsl,pq1-fec-enet";
+-			reg = <e00 188>;
++			reg = <0xe00 0x188>;
+ 			local-mac-address = [ 00 00 00 00 00 00 ];
+ 			interrupts = <3 1>;
+ 			interrupt-parent = <&PIC>;
+@@ -115,7 +116,7 @@
+ 			device_type = "network";
+ 			compatible = "fsl,mpc885-fec-enet",
+ 			             "fsl,pq1-fec-enet";
+-			reg = <1e00 188>;
++			reg = <0x1e00 0x188>;
+ 			local-mac-address = [ 00 00 00 00 00 00 ];
+ 			interrupts = <7 1>;
+ 			interrupt-parent = <&PIC>;
+@@ -126,7 +127,7 @@
+ 		PIC: interrupt-controller@0 {
+ 			interrupt-controller;
+ 			#interrupt-cells = <2>;
+-			reg = <0 24>;
++			reg = <0x0 0x24>;
+ 			compatible = "fsl,mpc885-pic", "fsl,pq1-pic";
+ 		};
+ 
+@@ -136,29 +137,29 @@
+ 			#size-cells = <2>;
+ 			compatible = "fsl,pq-pcmcia";
+ 			device_type = "pcmcia";
+-			reg = <80 80>;
++			reg = <0x80 0x80>;
+ 			interrupt-parent = <&PIC>;
+-			interrupts = <d 1>;
++			interrupts = <13 1>;
+ 		};
+ 
+ 		cpm@9c0 {
+ 			#address-cells = <1>;
+ 			#size-cells = <1>;
+ 			compatible = "fsl,mpc885-cpm", "fsl,cpm1";
+-			command-proc = <9c0>;
++			command-proc = <0x9c0>;
+ 			interrupts = <0>;	// cpm error interrupt
+ 			interrupt-parent = <&CPM_PIC>;
+-			reg = <9c0 40>;
++			reg = <0x9c0 0x40>;
+ 			ranges;
+ 
+ 			muram@2000 {
+ 				#address-cells = <1>;
+ 				#size-cells = <1>;
+-				ranges = <0 2000 2000>;
++				ranges = <0x0 0x2000 0x2000>;
+ 
+ 				data@0 {
+ 					compatible = "fsl,cpm-muram-data";
+-					reg = <0 1c00>;
++					reg = <0x0 0x1c00>;
+ 				};
+ 			};
+ 
+@@ -167,7 +168,7 @@
+ 				             "fsl,cpm1-brg",
+ 				             "fsl,cpm-brg";
+ 				clock-frequency = <0>;
+-				reg = <9f0 10>;
++				reg = <0x9f0 0x10>;
+ 			};
+ 
+ 			CPM_PIC: interrupt-controller@930 {
+@@ -175,7 +176,7 @@
+ 				#interrupt-cells = <1>;
+ 				interrupts = <5 2 0 2>;
+ 				interrupt-parent = <&PIC>;
+-				reg = <930 20>;
++				reg = <0x930 0x20>;
+ 				compatible = "fsl,mpc885-cpm-pic",
+ 				             "fsl,cpm1-pic";
+ 			};
+@@ -184,34 +185,34 @@
+ 				device_type = "serial";
+ 				compatible = "fsl,mpc885-smc-uart",
+ 				             "fsl,cpm1-smc-uart";
+-				reg = <a80 10 3e80 40>;
++				reg = <0xa80 0x10 0x3e80 0x40>;
+ 				interrupts = <4>;
+ 				interrupt-parent = <&CPM_PIC>;
+ 				fsl,cpm-brg = <1>;
+-				fsl,cpm-command = <0090>;
++				fsl,cpm-command = <0x90>;
+ 			};
+ 
+ 			serial@a90 {
+ 				device_type = "serial";
+ 				compatible = "fsl,mpc885-smc-uart",
+ 				             "fsl,cpm1-smc-uart";
+-				reg = <a90 10 3f80 40>;
++				reg = <0xa90 0x10 0x3f80 0x40>;
+ 				interrupts = <3>;
+ 				interrupt-parent = <&CPM_PIC>;
+ 				fsl,cpm-brg = <2>;
+-				fsl,cpm-command = <00d0>;
++				fsl,cpm-command = <0xd0>;
+ 			};
+ 
+ 			ethernet@a40 {
+ 				device_type = "network";
+ 				compatible = "fsl,mpc885-scc-enet",
+ 				             "fsl,cpm1-scc-enet";
+-				reg = <a40 18 3e00 100>;
++				reg = <0xa40 0x18 0x3e00 0x100>;
+ 				local-mac-address = [ 00 00 00 00 00 00 ];
+-				interrupts = <1c>;
++				interrupts = <28>;
+ 				interrupt-parent = <&CPM_PIC>;
+ 				phy-handle = <&PHY2>;
+-				fsl,cpm-command = <0080>;
++				fsl,cpm-command = <0x80>;
+ 				linux,network-index = <2>;
+ 			};
+ 		};
+--- a/arch/powerpc/boot/dts/pq2fads.dts
++++ b/arch/powerpc/boot/dts/pq2fads.dts
+@@ -1,7 +1,7 @@
+ /*
+  * Device Tree for the PQ2FADS-ZU board with an MPC8280 chip.
+  *
+- * Copyright 2007 Freescale Semiconductor Inc.
++ * Copyright 2007,2008 Freescale Semiconductor Inc.
+  *
+  * This program is free software; you can redistribute  it and/or modify it
+  * under  the terms of  the GNU General  Public License as published by the
+@@ -9,6 +9,8 @@
+  * option) any later version.
+  */
+ 
++/dts-v1/;
++
+ / {
+ 	model = "pq2fads";
+ 	compatible = "fsl,pq2fads";
+@@ -21,11 +23,11 @@
+ 
+ 		cpu@0 {
+ 			device_type = "cpu";
+-			reg = <0>;
+-			d-cache-line-size = <d#32>;
+-			i-cache-line-size = <d#32>;
+-			d-cache-size = <d#16384>;
+-			i-cache-size = <d#16384>;
++			reg = <0x0>;
++			d-cache-line-size = <32>;
++			i-cache-line-size = <32>;
++			d-cache-size = <16384>;
++			i-cache-size = <16384>;
+ 			timebase-frequency = <0>;
+ 			clock-frequency = <0>;
+ 		};
+@@ -33,7 +35,7 @@
+ 
+ 	memory {
+ 		device_type = "memory";
+-		reg = <0 0>;
++		reg = <0x0 0x0>;
+ 	};
+ 
+ 	localbus@f0010100 {
+@@ -41,67 +43,67 @@
+ 		             "fsl,pq2-localbus";
+ 		#address-cells = <2>;
+ 		#size-cells = <1>;
+-		reg = <f0010100 60>;
++		reg = <0xf0010100 0x60>;
+ 
+-		ranges = <0 0 fe000000 00800000
+-		          1 0 f4500000 00008000
+-		          8 0 f8200000 00008000>;
++		ranges = <0x0 0x0 0xfe000000 0x800000
++		          0x1 0x0 0xf4500000 0x8000
++		          0x8 0x0 0xf8200000 0x8000>;
+ 
+ 		flash@0,0 {
+ 			compatible = "jedec-flash";
+-			reg = <0 0 800000>;
++			reg = <0x0 0x0 0x800000>;
+ 			bank-width = <4>;
+ 			device-width = <1>;
+ 		};
+ 
+ 		bcsr@1,0 {
+-			reg = <1 0 20>;
++			reg = <0x1 0x0 0x20>;
+ 			compatible = "fsl,pq2fads-bcsr";
+ 		};
+ 
+ 		PCI_PIC: pic@8,0 {
+ 			#interrupt-cells = <1>;
+ 			interrupt-controller;
+-			reg = <8 0 8>;
++			reg = <0x8 0x0 0x8>;
+ 			compatible = "fsl,pq2ads-pci-pic";
+ 			interrupt-parent = <&PIC>;
+-			interrupts = <18 8>;
++			interrupts = <24 8>;
+ 		};
+ 	};
+ 
+ 	pci@f0010800 {
+ 		device_type = "pci";
+-		reg = <f0010800 10c f00101ac 8 f00101c4 8>;
++		reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>;
+ 		compatible = "fsl,mpc8280-pci", "fsl,pq2-pci";
+ 		#interrupt-cells = <1>;
+ 		#size-cells = <2>;
+ 		#address-cells = <3>;
+-		clock-frequency = <d#66000000>;
+-		interrupt-map-mask = <f800 0 0 7>;
++		clock-frequency = <66000000>;
++		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ 		interrupt-map = <
+ 		                /* IDSEL 0x16 */
+-		                 b000 0 0 1 &PCI_PIC 0
+-		                 b000 0 0 2 &PCI_PIC 1
+-		                 b000 0 0 3 &PCI_PIC 2
+-		                 b000 0 0 4 &PCI_PIC 3
++		                 0xb000 0x0 0x0 0x1 &PCI_PIC 0
++		                 0xb000 0x0 0x0 0x2 &PCI_PIC 1
++		                 0xb000 0x0 0x0 0x3 &PCI_PIC 2
++		                 0xb000 0x0 0x0 0x4 &PCI_PIC 3
+ 
+ 		                /* IDSEL 0x17 */
+-		                 b800 0 0 1 &PCI_PIC 4
+-		                 b800 0 0 2 &PCI_PIC 5
+-		                 b800 0 0 3 &PCI_PIC 6
+-		                 b800 0 0 4 &PCI_PIC 7
++		                 0xb800 0x0 0x0 0x1 &PCI_PIC 4
++		                 0xb800 0x0 0x0 0x2 &PCI_PIC 5
++		                 0xb800 0x0 0x0 0x3 &PCI_PIC 6
++		                 0xb800 0x0 0x0 0x4 &PCI_PIC 7
+ 
+ 		                /* IDSEL 0x18 */
+-		                 c000 0 0 1 &PCI_PIC 8
+-		                 c000 0 0 2 &PCI_PIC 9
+-		                 c000 0 0 3 &PCI_PIC a
+-		                 c000 0 0 4 &PCI_PIC b>;
++		                 0xc000 0x0 0x0 0x1 &PCI_PIC 8
++		                 0xc000 0x0 0x0 0x2 &PCI_PIC 9
++		                 0xc000 0x0 0x0 0x3 &PCI_PIC 10
++		                 0xc000 0x0 0x0 0x4 &PCI_PIC 11>;
+ 
+ 		interrupt-parent = <&PIC>;
+-		interrupts = <12 8>;
+-		ranges = <42000000 0 80000000 80000000 0 20000000
+-		          02000000 0 a0000000 a0000000 0 20000000
+-		          01000000 0 00000000 f6000000 0 02000000>;
++		interrupts = <18 8>;
++		ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000
++		          0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
++		          0x1000000 0x0 0x0 0xf6000000 0x0 0x2000000>;
+ 	};
+ 
+ 	soc@f0000000 {
+@@ -109,27 +111,27 @@
+ 		#size-cells = <1>;
+ 		device_type = "soc";
+ 		compatible = "fsl,mpc8280", "fsl,pq2-soc";
+-		ranges = <00000000 f0000000 00053000>;
++		ranges = <0x0 0xf0000000 0x53000>;
+ 
+ 		// Temporary -- will go away once kernel uses ranges for get_immrbase().
+-		reg = <f0000000 00053000>;
++		reg = <0xf0000000 0x53000>;
+ 
+ 		cpm@119c0 {
+ 			#address-cells = <1>;
+ 			#size-cells = <1>;
+ 			#interrupt-cells = <2>;
+ 			compatible = "fsl,mpc8280-cpm", "fsl,cpm2";
+-			reg = <119c0 30>;
++			reg = <0x119c0 0x30>;
+ 			ranges;
+ 
+ 			muram@0 {
+ 				#address-cells = <1>;
+ 				#size-cells = <1>;
+-				ranges = <0 0 10000>;
++				ranges = <0x0 0x0 0x10000>;
+ 
+ 				data@0 {
+ 					compatible = "fsl,cpm-muram-data";
+-					reg = <0 2000 9800 800>;
++					reg = <0x0 0x2000 0x9800 0x800>;
+ 				};
+ 			};
+ 
+@@ -137,53 +139,53 @@
+ 				compatible = "fsl,mpc8280-brg",
+ 				             "fsl,cpm2-brg",
+ 				             "fsl,cpm-brg";
+-				reg = <119f0 10 115f0 10>;
++				reg = <0x119f0 0x10 0x115f0 0x10>;
+ 			};
+ 
+ 			serial@11a00 {
+ 				device_type = "serial";
+ 				compatible = "fsl,mpc8280-scc-uart",
+ 				             "fsl,cpm2-scc-uart";
+-				reg = <11a00 20 8000 100>;
+-				interrupts = <28 8>;
++				reg = <0x11a00 0x20 0x8000 0x100>;
++				interrupts = <40 8>;
+ 				interrupt-parent = <&PIC>;
+ 				fsl,cpm-brg = <1>;
+-				fsl,cpm-command = <00800000>;
++				fsl,cpm-command = <0x800000>;
+ 			};
+ 
+ 			serial@11a20 {
+ 				device_type = "serial";
+ 				compatible = "fsl,mpc8280-scc-uart",
+ 				             "fsl,cpm2-scc-uart";
+-				reg = <11a20 20 8100 100>;
+-				interrupts = <29 8>;
++				reg = <0x11a20 0x20 0x8100 0x100>;
++				interrupts = <41 8>;
+ 				interrupt-parent = <&PIC>;
+ 				fsl,cpm-brg = <2>;
+-				fsl,cpm-command = <04a00000>;
++				fsl,cpm-command = <0x4a00000>;
+ 			};
+ 
+ 			ethernet@11320 {
+ 				device_type = "network";
+ 				compatible = "fsl,mpc8280-fcc-enet",
+ 				             "fsl,cpm2-fcc-enet";
+-				reg = <11320 20 8500 100 113b0 1>;
+-				interrupts = <21 8>;
++				reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>;
++				interrupts = <33 8>;
+ 				interrupt-parent = <&PIC>;
+ 				phy-handle = <&PHY0>;
+ 				linux,network-index = <0>;
+-				fsl,cpm-command = <16200300>;
++				fsl,cpm-command = <0x16200300>;
+ 			};
+ 
+ 			ethernet@11340 {
+ 				device_type = "network";
+ 				compatible = "fsl,mpc8280-fcc-enet",
+ 				             "fsl,cpm2-fcc-enet";
+-				reg = <11340 20 8600 100 113d0 1>;
+-				interrupts = <22 8>;
++				reg = <0x11340 0x20 0x8600 0x100 0x113d0 0x1>;
++				interrupts = <34 8>;
+ 				interrupt-parent = <&PIC>;
+ 				phy-handle = <&PHY1>;
+ 				linux,network-index = <1>;
+-				fsl,cpm-command = <1a400300>;
++				fsl,cpm-command = <0x1a400300>;
+ 				local-mac-address = [00 e0 0c 00 79 01];
+ 			};
+ 
+@@ -194,21 +196,21 @@
+ 				             "fsl,cpm2-mdio-bitbang";
+ 				#address-cells = <1>;
+ 				#size-cells = <0>;
+-				reg = <10d40 14>;
++				reg = <0x10d40 0x14>;
+ 				fsl,mdio-pin = <9>;
+-				fsl,mdc-pin = <a>;
++				fsl,mdc-pin = <10>;
+ 
+ 				PHY0: ethernet-phy@0 {
+ 					interrupt-parent = <&PIC>;
+-					interrupts = <19 2>;
+-					reg = <0>;
++					interrupts = <25 2>;
++					reg = <0x0>;
+ 					device_type = "ethernet-phy";
+ 				};
+ 
+ 				PHY1: ethernet-phy@1 {
+ 					interrupt-parent = <&PIC>;
+-					interrupts = <19 2>;
+-					reg = <3>;
++					interrupts = <25 2>;
++					reg = <0x3>;
+ 					device_type = "ethernet-phy";
+ 				};
+ 			};
+@@ -218,17 +220,17 @@
+ 				#size-cells = <0>;
+ 				compatible = "fsl,mpc8280-usb",
+ 				             "fsl,cpm2-usb";
+-				reg = <11b60 18 8b00 100>;
++				reg = <0x11b60 0x18 0x8b00 0x100>;
+ 				interrupt-parent = <&PIC>;
+-				interrupts = <b 8>;
+-				fsl,cpm-command = <2e600000>;
++				interrupts = <11 8>;
++				fsl,cpm-command = <0x2e600000>;
+ 			};
+ 		};
+ 
+ 		PIC: interrupt-controller@10c00 {
+ 			#interrupt-cells = <2>;
+ 			interrupt-controller;
+-			reg = <10c00 80>;
++			reg = <0x10c00 0x80>;
+ 			compatible = "fsl,mpc8280-pic", "fsl,cpm2-pic";
+ 		};
+ 
+--- a/arch/powerpc/boot/dts/prpmc2800.dts
++++ b/arch/powerpc/boot/dts/prpmc2800.dts
+@@ -11,6 +11,8 @@
+  * if it can determine the exact PrPMC type.
+  */
+ 
++/dts-v1/;
++
+ / {
+ 	#address-cells = <1>;
+ 	#size-cells = <1>;
+@@ -25,46 +27,46 @@
+ 		PowerPC,7447 {
+ 			device_type = "cpu";
+ 			reg = <0>;
+-			clock-frequency = <2bb0b140>;	/* Default (733 MHz) */
+-			bus-frequency = <7f28155>;	/* 133.333333 MHz */
+-			timebase-frequency = <1fca055>;	/* 33.333333 MHz */
+-			i-cache-line-size = <20>;
+-			d-cache-line-size = <20>;
+-			i-cache-size = <8000>;
+-			d-cache-size = <8000>;
++			clock-frequency = <733333333>;	/* Default */
++			bus-frequency = <133333333>;
++			timebase-frequency = <33333333>;
++			i-cache-line-size = <32>;
++			d-cache-line-size = <32>;
++			i-cache-size = <32768>;
++			d-cache-size = <32768>;
+ 		};
+ 	};
+ 
+ 	memory {
+ 		device_type = "memory";
+-		reg = <00000000 20000000>;	/* Default (512MB) */
++		reg = <0x0 0x20000000>;			/* Default (512MB) */
+ 	};
+ 
+-	mv64x60@f1000000 { /* Marvell Discovery */
++	system-controller@f1000000 { /* Marvell Discovery mv64360 */
+ 		#address-cells = <1>;
+ 		#size-cells = <1>;
+ 		model = "mv64360";			/* Default */
+-		compatible = "marvell,mv64x60";
+-		clock-frequency = <7f28155>;		/* 133.333333 MHz */
+-		reg = <f1000000 00010000>;
+-		virtual-reg = <f1000000>;
+-		ranges = <88000000 88000000 01000000	/* PCI 0 I/O Space */
+-			  80000000 80000000 08000000	/* PCI 0 MEM Space */
+-			  a0000000 a0000000 04000000	/* User FLASH */
+-			  00000000 f1000000 00010000	/* Bridge's regs */
+-			  f2000000 f2000000 00040000>;	/* Integrated SRAM */
++		compatible = "marvell,mv64360";
++		clock-frequency = <133333333>;
++		reg = <0xf1000000 0x10000>;
++		virtual-reg = <0xf1000000>;
++		ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
++			  0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
++			  0xa0000000 0xa0000000 0x4000000 /* User FLASH */
++			  0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
++			  0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
+ 
+ 		flash@a0000000 {
+ 			device_type = "rom";
+ 			compatible = "direct-mapped";
+-			reg = <a0000000 4000000>; /* Default (64MB) */
++			reg = <0xa0000000 0x4000000>; /* Default (64MB) */
+ 			probe-type = "CFI";
+ 			bank-width = <4>;
+-			partitions = <00000000 00100000 /* RO */
+-				      00100000 00040001 /* RW */
+-				      00140000 00400000 /* RO */
+-				      00540000 039c0000 /* RO */
+-				      03f00000 00100000>; /* RO */
++			partitions = <0x00000000 0x00100000 /* RO */
++				      0x00100000 0x00040001 /* RW */
++				      0x00140000 0x00400000 /* RO */
++				      0x00540000 0x039c0000 /* RO */
++				      0x03f00000 0x00100000>; /* RO */
+ 			partition-names = "FW Image A", "FW Config Data", "Kernel Image", "Filesystem", "FW Image B";
+ 		};
+ 
+@@ -72,171 +74,153 @@
+ 			#address-cells = <1>;
+ 			#size-cells = <0>;
+ 			device_type = "mdio";
+-			compatible = "marvell,mv64x60-mdio";
+-			ethernet-phy@1 {
++			compatible = "marvell,mv64360-mdio";
++			PHY0: ethernet-phy@1 {
+ 				device_type = "ethernet-phy";
+ 				compatible = "broadcom,bcm5421";
+-				interrupts = <4c>;	/* GPP 12 */
+-				interrupt-parent = <&/mv64x60/pic>;
++				interrupts = <76>;	/* GPP 12 */
++				interrupt-parent = <&PIC>;
+ 				reg = <1>;
+ 			};
+-			ethernet-phy@3 {
++			PHY1: ethernet-phy@3 {
+ 				device_type = "ethernet-phy";
+ 				compatible = "broadcom,bcm5421";
+-				interrupts = <4c>;	/* GPP 12 */
+-				interrupt-parent = <&/mv64x60/pic>;
++				interrupts = <76>;	/* GPP 12 */
++				interrupt-parent = <&PIC>;
+ 				reg = <3>;
+ 			};
+ 		};
+ 
+-		ethernet@2000 {
+-			reg = <2000 2000>;
+-			eth0 {
++		ethernet-group@2000 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			compatible = "marvell,mv64360-eth-group";
++			reg = <0x2000 0x2000>;
++			ethernet@0 {
+ 				device_type = "network";
+-				compatible = "marvell,mv64x60-eth";
+-				block-index = <0>;
+-				interrupts = <20>;
+-				interrupt-parent = <&/mv64x60/pic>;
+-				phy = <&/mv64x60/mdio/ethernet-phy@1>;
++				compatible = "marvell,mv64360-eth";
++				reg = <0>;
++				interrupts = <32>;
++				interrupt-parent = <&PIC>;
++				phy = <&PHY0>;
+ 				local-mac-address = [ 00 00 00 00 00 00 ];
+ 			};
+-			eth1 {
++			ethernet@1 {
+ 				device_type = "network";
+-				compatible = "marvell,mv64x60-eth";
+-				block-index = <1>;
+-				interrupts = <21>;
+-				interrupt-parent = <&/mv64x60/pic>;
+-				phy = <&/mv64x60/mdio/ethernet-phy@3>;
++				compatible = "marvell,mv64360-eth";
++				reg = <1>;
++				interrupts = <33>;
++				interrupt-parent = <&PIC>;
++				phy = <&PHY1>;
+ 				local-mac-address = [ 00 00 00 00 00 00 ];
+ 			};
+ 		};
+ 
+-		sdma@4000 {
+-			device_type = "dma";
+-			compatible = "marvell,mv64x60-sdma";
+-			reg = <4000 c18>;
+-			virtual-reg = <f1004000>;
+-			interrupt-base = <0>;
+-			interrupts = <24>;
+-			interrupt-parent = <&/mv64x60/pic>;
+-		};
+-
+-		sdma@6000 {
+-			device_type = "dma";
+-			compatible = "marvell,mv64x60-sdma";
+-			reg = <6000 c18>;
+-			virtual-reg = <f1006000>;
+-			interrupt-base = <0>;
+-			interrupts = <26>;
+-			interrupt-parent = <&/mv64x60/pic>;
+-		};
+-
+-		brg@b200 {
+-			compatible = "marvell,mv64x60-brg";
+-			reg = <b200 8>;
++		SDMA0: sdma@4000 {
++			compatible = "marvell,mv64360-sdma";
++			reg = <0x4000 0xc18>;
++			virtual-reg = <0xf1004000>;
++			interrupts = <36>;
++			interrupt-parent = <&PIC>;
++		};
++
++		SDMA1: sdma@6000 {
++			compatible = "marvell,mv64360-sdma";
++			reg = <0x6000 0xc18>;
++			virtual-reg = <0xf1006000>;
++			interrupts = <38>;
++			interrupt-parent = <&PIC>;
++		};
++
++		BRG0: brg@b200 {
++			compatible = "marvell,mv64360-brg";
++			reg = <0xb200 0x8>;
+ 			clock-src = <8>;
+-			clock-frequency = <7ed6b40>;
+-			current-speed = <2580>;
+-			bcr = <0>;
++			clock-frequency = <133333333>;
++			current-speed = <9600>;
+ 		};
+ 
+-		brg@b208 {
+-			compatible = "marvell,mv64x60-brg";
+-			reg = <b208 8>;
++		BRG1: brg@b208 {
++			compatible = "marvell,mv64360-brg";
++			reg = <0xb208 0x8>;
+ 			clock-src = <8>;
+-			clock-frequency = <7ed6b40>;
+-			current-speed = <2580>;
+-			bcr = <0>;
++			clock-frequency = <133333333>;
++			current-speed = <9600>;
+ 		};
+ 
+-		cunit@f200 {
+-			reg = <f200 200>;
++		CUNIT: cunit@f200 {
++			reg = <0xf200 0x200>;
+ 		};
+ 
+-		mpscrouting@b400 {
+-			reg = <b400 c>;
++		MPSCROUTING: mpscrouting@b400 {
++			reg = <0xb400 0xc>;
+ 		};
+ 
+-		mpscintr@b800 {
+-			reg = <b800 100>;
+-			virtual-reg = <f100b800>;
++		MPSCINTR: mpscintr@b800 {
++			reg = <0xb800 0x100>;
++			virtual-reg = <0xf100b800>;
+ 		};
+ 
+-		mpsc@8000 {
++		MPSC0: mpsc@8000 {
+ 			device_type = "serial";
+-			compatible = "marvell,mpsc";
+-			reg = <8000 38>;
+-			virtual-reg = <f1008000>;
+-			sdma = <&/mv64x60/sdma@4000>;
+-			brg = <&/mv64x60/brg@b200>;
+-			cunit = <&/mv64x60/cunit@f200>;
+-			mpscrouting = <&/mv64x60/mpscrouting@b400>;
+-			mpscintr = <&/mv64x60/mpscintr@b800>;
+-			block-index = <0>;
+-			max_idle = <28>;
+-			chr_1 = <0>;
+-			chr_2 = <0>;
+-			chr_10 = <3>;
+-			mpcr = <0>;
+-			interrupts = <28>;
+-			interrupt-parent = <&/mv64x60/pic>;
++			compatible = "marvell,mv64360-mpsc";
++			reg = <0x8000 0x38>;
++			virtual-reg = <0xf1008000>;
++			sdma = <&SDMA0>;
++			brg = <&BRG0>;
++			cunit = <&CUNIT>;
++			mpscrouting = <&MPSCROUTING>;
++			mpscintr = <&MPSCINTR>;
++			cell-index = <0>;
++			interrupts = <40>;
++			interrupt-parent = <&PIC>;
+ 		};
+ 
+-		mpsc@9000 {
++		MPSC1: mpsc@9000 {
+ 			device_type = "serial";
+-			compatible = "marvell,mpsc";
+-			reg = <9000 38>;
+-			virtual-reg = <f1009000>;
+-			sdma = <&/mv64x60/sdma@6000>;
+-			brg = <&/mv64x60/brg@b208>;
+-			cunit = <&/mv64x60/cunit@f200>;
+-			mpscrouting = <&/mv64x60/mpscrouting@b400>;
+-			mpscintr = <&/mv64x60/mpscintr@b800>;
+-			block-index = <1>;
+-			max_idle = <28>;
+-			chr_1 = <0>;
+-			chr_2 = <0>;
+-			chr_10 = <3>;
+-			mpcr = <0>;
+-			interrupts = <2a>;
+-			interrupt-parent = <&/mv64x60/pic>;
++			compatible = "marvell,mv64360-mpsc";
++			reg = <0x9000 0x38>;
++			virtual-reg = <0xf1009000>;
++			sdma = <&SDMA1>;
++			brg = <&BRG1>;
++			cunit = <&CUNIT>;
++			mpscrouting = <&MPSCROUTING>;
++			mpscintr = <&MPSCINTR>;
++			cell-index = <1>;
++			interrupts = <42>;
++			interrupt-parent = <&PIC>;
+ 		};
+ 
+ 		wdt@b410 {			/* watchdog timer */
+-			compatible = "marvell,mv64x60-wdt";
+-			reg = <b410 8>;
+-			timeout = <a>;		/* wdt timeout in seconds */
++			compatible = "marvell,mv64360-wdt";
++			reg = <0xb410 0x8>;
+ 		};
+ 
+ 		i2c@c000 {
+ 			device_type = "i2c";
+-			compatible = "marvell,mv64x60-i2c";
+-			reg = <c000 20>;
+-			virtual-reg = <f100c000>;
+-			freq_m = <8>;
+-			freq_n = <3>;
+-			timeout = <3e8>;		/* 1000 = 1 second */
+-			retries = <1>;
+-			interrupts = <25>;
+-			interrupt-parent = <&/mv64x60/pic>;
++			compatible = "marvell,mv64360-i2c";
++			reg = <0xc000 0x20>;
++			virtual-reg = <0xf100c000>;
++			interrupts = <37>;
++			interrupt-parent = <&PIC>;
+ 		};
+ 
+-		pic {
++		PIC: pic {
+ 			#interrupt-cells = <1>;
+ 			#address-cells = <0>;
+-			compatible = "marvell,mv64x60-pic";
+-			reg = <0000 88>;
++			compatible = "marvell,mv64360-pic";
++			reg = <0x0 0x88>;
+ 			interrupt-controller;
+ 		};
+ 
+ 		mpp@f000 {
+-			compatible = "marvell,mv64x60-mpp";
+-			reg = <f000 10>;
++			compatible = "marvell,mv64360-mpp";
++			reg = <0xf000 0x10>;
+ 		};
+ 
+ 		gpp@f100 {
+-			compatible = "marvell,mv64x60-gpp";
+-			reg = <f100 20>;
++			compatible = "marvell,mv64360-gpp";
++			reg = <0xf100 0x20>;
+ 		};
+ 
+ 		pci@80000000 {
+@@ -244,73 +228,75 @@
+ 			#size-cells = <2>;
+ 			#interrupt-cells = <1>;
+ 			device_type = "pci";
+-			compatible = "marvell,mv64x60-pci";
+-			reg = <0cf8 8>;
+-			ranges = <01000000 0        0 88000000 0 01000000
+-				  02000000 0 80000000 80000000 0 08000000>;
+-			bus-range = <0 ff>;
+-			clock-frequency = <3EF1480>;
+-			interrupt-pci-iack = <0c34>;
+-			interrupt-parent = <&/mv64x60/pic>;
+-			interrupt-map-mask = <f800 0 0 7>;
++			compatible = "marvell,mv64360-pci";
++			reg = <0xcf8 0x8>;
++			ranges = <0x01000000 0x0        0x0
++					0x88000000 0x0 0x01000000
++				  0x02000000 0x0 0x80000000
++				  	0x80000000 0x0 0x08000000>;
++			bus-range = <0 255>;
++			clock-frequency = <66000000>;
++			interrupt-pci-iack = <0xc34>;
++			interrupt-parent = <&PIC>;
++			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ 			interrupt-map = <
+ 				/* IDSEL 0x0a */
+-				5000 0 0 1 &/mv64x60/pic 50
+-				5000 0 0 2 &/mv64x60/pic 51
+-				5000 0 0 3 &/mv64x60/pic 5b
+-				5000 0 0 4 &/mv64x60/pic 5d
++				0x5000 0 0 1 &PIC 80
++				0x5000 0 0 2 &PIC 81
++				0x5000 0 0 3 &PIC 91
++				0x5000 0 0 4 &PIC 93
+ 
+ 				/* IDSEL 0x0b */
+-				5800 0 0 1 &/mv64x60/pic 5b
+-				5800 0 0 2 &/mv64x60/pic 5d
+-				5800 0 0 3 &/mv64x60/pic 50
+-				5800 0 0 4 &/mv64x60/pic 51
++				0x5800 0 0 1 &PIC 91
++				0x5800 0 0 2 &PIC 93
++				0x5800 0 0 3 &PIC 80
++				0x5800 0 0 4 &PIC 81
+ 
+ 				/* IDSEL 0x0c */
+-				6000 0 0 1 &/mv64x60/pic 5b
+-				6000 0 0 2 &/mv64x60/pic 5d
+-				6000 0 0 3 &/mv64x60/pic 50
+-				6000 0 0 4 &/mv64x60/pic 51
++				0x6000 0 0 1 &PIC 91
++				0x6000 0 0 2 &PIC 93
++				0x6000 0 0 3 &PIC 80
++				0x6000 0 0 4 &PIC 81
+ 
+ 				/* IDSEL 0x0d */
+-				6800 0 0 1 &/mv64x60/pic 5d
+-				6800 0 0 2 &/mv64x60/pic 50
+-				6800 0 0 3 &/mv64x60/pic 51
+-				6800 0 0 4 &/mv64x60/pic 5b
++				0x6800 0 0 1 &PIC 93
++				0x6800 0 0 2 &PIC 80
++				0x6800 0 0 3 &PIC 81
++				0x6800 0 0 4 &PIC 91
+ 			>;
+ 		};
+ 
+ 		cpu-error@0070 {
+-			compatible = "marvell,mv64x60-cpu-error";
+-			reg = <0070 10 0128 28>;
+-			interrupts = <03>;
+-			interrupt-parent = <&/mv64x60/pic>;
++			compatible = "marvell,mv64360-cpu-error";
++			reg = <0x70 0x10 0x128 0x28>;
++			interrupts = <3>;
++			interrupt-parent = <&PIC>;
+ 		};
+ 
+ 		sram-ctrl@0380 {
+-			compatible = "marvell,mv64x60-sram-ctrl";
+-			reg = <0380 80>;
+-			interrupts = <0d>;
+-			interrupt-parent = <&/mv64x60/pic>;
++			compatible = "marvell,mv64360-sram-ctrl";
++			reg = <0x380 0x80>;
++			interrupts = <13>;
++			interrupt-parent = <&PIC>;
+ 		};
+ 
+ 		pci-error@1d40 {
+-			compatible = "marvell,mv64x60-pci-error";
+-			reg = <1d40 40 0c28 4>;
+-			interrupts = <0c>;
+-			interrupt-parent = <&/mv64x60/pic>;
++			compatible = "marvell,mv64360-pci-error";
++			reg = <0x1d40 0x40 0xc28 0x4>;
++			interrupts = <12>;
++			interrupt-parent = <&PIC>;
+ 		};
+ 
+ 		mem-ctrl@1400 {
+-			compatible = "marvell,mv64x60-mem-ctrl";
+-			reg = <1400 60>;
+-			interrupts = <11>;
+-			interrupt-parent = <&/mv64x60/pic>;
++			compatible = "marvell,mv64360-mem-ctrl";
++			reg = <0x1400 0x60>;
++			interrupts = <17>;
++			interrupt-parent = <&PIC>;
+ 		};
+ 	};
+ 
+ 	chosen {
+ 		bootargs = "ip=on";
+-		linux,stdout-path = "/mv64x60@f1000000/mpsc@8000";
++		linux,stdout-path = &MPSC0;
+ 	};
+ };
+--- a/arch/powerpc/boot/dts/rainier.dts
++++ b/arch/powerpc/boot/dts/rainier.dts
+@@ -254,7 +254,6 @@
+ 			};
+ 
+ 			EMAC0: ethernet@ef600e00 {
+-				linux,network-index = <0>;
+ 				device_type = "network";
+ 				compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
+ 				interrupt-parent = <&EMAC0>;
+@@ -270,7 +269,7 @@
+ 				mal-tx-channel = <0>;
+ 				mal-rx-channel = <0>;
+ 				cell-index = <0>;
+-				max-frame-size = <5dc>;
++				max-frame-size = <2328>;
+ 				rx-fifo-size = <1000>;
+ 				tx-fifo-size = <800>;
+ 				phy-mode = "rgmii";
+@@ -284,7 +283,6 @@
+ 			};
+ 
+ 			EMAC1: ethernet@ef600f00 {
+-				linux,network-index = <1>;
+ 				device_type = "network";
+ 				compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
+ 				interrupt-parent = <&EMAC1>;
+@@ -300,7 +298,7 @@
+ 				mal-tx-channel = <1>;
+ 				mal-rx-channel = <1>;
+ 				cell-index = <1>;
+-				max-frame-size = <5dc>;
++				max-frame-size = <2328>;
+ 				rx-fifo-size = <1000>;
+ 				tx-fifo-size = <800>;
+ 				phy-mode = "rgmii";
+--- /dev/null
++++ b/arch/powerpc/boot/dts/sbc8641d.dts
+@@ -0,0 +1,352 @@
++/*
++ * SBC8641D Device Tree Source
++ *
++ * Copyright 2008 Wind River Systems Inc.
++ *
++ * Paul Gortmaker (see MAINTAINERS for contact information)
++ *
++ * Based largely on the mpc8641_hpcn.dts by Freescale Semiconductor Inc.
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++/dts-v1/;
++
++/ {
++	model = "SBC8641D";
++	compatible = "wind,sbc8641";
++	#address-cells = <1>;
++	#size-cells = <1>;
++
++	aliases {
++		ethernet0 = &enet0;
++		ethernet1 = &enet1;
++		ethernet2 = &enet2;
++		ethernet3 = &enet3;
++		serial0 = &serial0;
++		serial1 = &serial1;
++		pci0 = &pci0;
++		pci1 = &pci1;
++	};
++
++	cpus {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		PowerPC,8641@0 {
++			device_type = "cpu";
++			reg = <0>;
++			d-cache-line-size = <32>;
++			i-cache-line-size = <32>;
++			d-cache-size = <32768>;		// L1
++			i-cache-size = <32768>;		// L1
++			timebase-frequency = <0>;	// From uboot
++			bus-frequency = <0>;		// From uboot
++			clock-frequency = <0>;		// From uboot
++		};
++		PowerPC,8641@1 {
++			device_type = "cpu";
++			reg = <1>;
++			d-cache-line-size = <32>;
++			i-cache-line-size = <32>;
++			d-cache-size = <32768>;
++			i-cache-size = <32768>;
++			timebase-frequency = <0>;	// From uboot
++			bus-frequency = <0>;		// From uboot
++			clock-frequency = <0>;		// From uboot
++		};
++	};
++
++	memory {
++		device_type = "memory";
++		reg = <0x00000000 0x20000000>;	// 512M at 0x0
++	};
++
++	localbus@f8005000 {
++		#address-cells = <2>;
++		#size-cells = <1>;
++		compatible = "fsl,mpc8641-localbus", "simple-bus";
++		reg = <0xf8005000 0x1000>;
++		interrupts = <19 2>;
++		interrupt-parent = <&mpic>;
++
++		ranges = <0 0 0xff000000 0x01000000	// 16MB Boot flash
++			  1 0 0xf0000000 0x00010000	// 64KB EEPROM
++			  2 0 0xf1000000 0x00100000	// EPLD (1MB)
++			  3 0 0xe0000000 0x04000000	// 64MB LB SDRAM (CS3)
++			  4 0 0xe4000000 0x04000000	// 64MB LB SDRAM (CS4)
++			  6 0 0xf4000000 0x00100000	// LCD display (1MB)
++			  7 0 0xe8000000 0x04000000>;	// 64MB OneNAND
++
++		flash@0,0 {
++			compatible = "cfi-flash";
++			reg = <0 0 0x01000000>;
++			bank-width = <2>;
++			device-width = <2>;
++			#address-cells = <1>;
++			#size-cells = <1>;
++			partition@0 {
++				label = "dtb";
++				reg = <0x00000000 0x00100000>;
++				read-only;
++			};
++			partition@300000 {
++				label = "kernel";
++				reg = <0x00100000 0x00400000>;
++				read-only;
++			};
++			partition@400000 {
++				label = "fs";
++				reg = <0x00500000 0x00a00000>;
++			};
++			partition@700000 {
++				label = "firmware";
++				reg = <0x00f00000 0x00100000>;
++				read-only;
++			};
++		};
++
++		epld@2,0 {
++			compatible = "wrs,epld-localbus";
++			#address-cells = <2>;
++			#size-cells = <1>;
++			reg = <2 0 0x100000>;
++			ranges = <0 0 5 0 1	// User switches
++				  1 0 5 1 1	// Board ID/Rev
++				  3 0 5 3 1>;	// LEDs
++		};
++	};
++
++	soc@f8000000 {
++		#address-cells = <1>;
++		#size-cells = <1>;
++		device_type = "soc";
++		compatible = "simple-bus";
++		ranges = <0x00000000 0xf8000000 0x00100000>;
++		reg = <0xf8000000 0x00001000>;	// CCSRBAR
++		bus-frequency = <0>;
++
++		i2c@3000 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			cell-index = <0>;
++			compatible = "fsl-i2c";
++			reg = <0x3000 0x100>;
++			interrupts = <43 2>;
++			interrupt-parent = <&mpic>;
++			dfsrr;
++		};
++
++		i2c@3100 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			cell-index = <1>;
++			compatible = "fsl-i2c";
++			reg = <0x3100 0x100>;
++			interrupts = <43 2>;
++			interrupt-parent = <&mpic>;
++			dfsrr;
++		};
++
++		mdio@24520 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			compatible = "fsl,gianfar-mdio";
++			reg = <0x24520 0x20>;
++
++			phy0: ethernet-phy@1f {
++				interrupt-parent = <&mpic>;
++				interrupts = <10 1>;
++				reg = <0x1f>;
++				device_type = "ethernet-phy";
++			};
++			phy1: ethernet-phy@0 {
++				interrupt-parent = <&mpic>;
++				interrupts = <10 1>;
++				reg = <0>;
++				device_type = "ethernet-phy";
++			};
++			phy2: ethernet-phy@1 {
++				interrupt-parent = <&mpic>;
++				interrupts = <10 1>;
++				reg = <1>;
++				device_type = "ethernet-phy";
++			};
++			phy3: ethernet-phy@2 {
++				interrupt-parent = <&mpic>;
++				interrupts = <10 1>;
++				reg = <2>;
++				device_type = "ethernet-phy";
++			};
++		};
++
++		enet0: ethernet@24000 {
++			cell-index = <0>;
++			device_type = "network";
++			model = "TSEC";
++			compatible = "gianfar";
++			reg = <0x24000 0x1000>;
++			local-mac-address = [ 00 00 00 00 00 00 ];
++			interrupts = <29 2 30  2 34 2>;
++			interrupt-parent = <&mpic>;
++			phy-handle = <&phy0>;
++			phy-connection-type = "rgmii-id";
++		};
++
++		enet1: ethernet@25000 {
++			cell-index = <1>;
++			device_type = "network";
++			model = "TSEC";
++			compatible = "gianfar";
++			reg = <0x25000 0x1000>;
++			local-mac-address = [ 00 00 00 00 00 00 ];
++			interrupts = <35 2 36 2 40 2>;
++			interrupt-parent = <&mpic>;
++			phy-handle = <&phy1>;
++			phy-connection-type = "rgmii-id";
++		};
++
++		enet2: ethernet@26000 {
++			cell-index = <2>;
++			device_type = "network";
++			model = "TSEC";
++			compatible = "gianfar";
++			reg = <0x26000 0x1000>;
++			local-mac-address = [ 00 00 00 00 00 00 ];
++			interrupts = <31 2 32 2 33 2>;
++			interrupt-parent = <&mpic>;
++			phy-handle = <&phy2>;
++			phy-connection-type = "rgmii-id";
++		};
++
++		enet3: ethernet@27000 {
++			cell-index = <3>;
++			device_type = "network";
++			model = "TSEC";
++			compatible = "gianfar";
++			reg = <0x27000 0x1000>;
++			local-mac-address = [ 00 00 00 00 00 00 ];
++			interrupts = <37 2 38 2 39 2>;
++			interrupt-parent = <&mpic>;
++			phy-handle = <&phy3>;
++			phy-connection-type = "rgmii-id";
++		};
++
++		serial0: serial@4500 {
++			cell-index = <0>;
++			device_type = "serial";
++			compatible = "ns16550";
++			reg = <0x4500 0x100>;
++			clock-frequency = <0>;
++			interrupts = <42 2>;
++			interrupt-parent = <&mpic>;
++		};
++
++		serial1: serial@4600 {
++			cell-index = <1>;
++			device_type = "serial";
++			compatible = "ns16550";
++			reg = <0x4600 0x100>;
++			clock-frequency = <0>;
++			interrupts = <28 2>;
++			interrupt-parent = <&mpic>;
++		};
++
++		mpic: pic@40000 {
++			clock-frequency = <0>;
++			interrupt-controller;
++			#address-cells = <0>;
++			#interrupt-cells = <2>;
++			reg = <0x40000 0x40000>;
++			compatible = "chrp,open-pic";
++			device_type = "open-pic";
++			big-endian;
++		};
++
++		global-utilities@e0000 {
++			compatible = "fsl,mpc8641-guts";
++			reg = <0xe0000 0x1000>;
++			fsl,has-rstcr;
++		};
++	};
++
++	pci0: pcie@f8008000 {
++		cell-index = <0>;
++		compatible = "fsl,mpc8641-pcie";
++		device_type = "pci";
++		#interrupt-cells = <1>;
++		#size-cells = <2>;
++		#address-cells = <3>;
++		reg = <0xf8008000 0x1000>;
++		bus-range = <0x0 0xff>;
++		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
++			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
++		clock-frequency = <33333333>;
++		interrupt-parent = <&mpic>;
++		interrupts = <24 2>;
++		interrupt-map-mask = <0xff00 0 0 7>;
++		interrupt-map = <
++			/* IDSEL 0x0 */
++			0x0000 0 0 1 &mpic 0 1
++			0x0000 0 0 2 &mpic 1 1
++			0x0000 0 0 3 &mpic 2 1
++			0x0000 0 0 4 &mpic 3 1
++			>;
++
++		pcie@0 {
++			reg = <0 0 0 0 0>;
++			#size-cells = <2>;
++			#address-cells = <3>;
++			device_type = "pci";
++			ranges = <0x02000000 0x0 0x80000000
++				  0x02000000 0x0 0x80000000
++				  0x0 0x20000000
++
++				  0x01000000 0x0 0x00000000
++				  0x01000000 0x0 0x00000000
++				  0x0 0x00100000>;
++		};
++
++	};
++
++	pci1: pcie@f8009000 {
++		cell-index = <1>;
++		compatible = "fsl,mpc8641-pcie";
++		device_type = "pci";
++		#interrupt-cells = <1>;
++		#size-cells = <2>;
++		#address-cells = <3>;
++		reg = <0xf8009000 0x1000>;
++		bus-range = <0 0xff>;
++		ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
++			  0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
++		clock-frequency = <33333333>;
++		interrupt-parent = <&mpic>;
++		interrupts = <25 2>;
++		interrupt-map-mask = <0xf800 0 0 7>;
++		interrupt-map = <
++			/* IDSEL 0x0 */
++			0x0000 0 0 1 &mpic 4 1
++			0x0000 0 0 2 &mpic 5 1
++			0x0000 0 0 3 &mpic 6 1
++			0x0000 0 0 4 &mpic 7 1
++			>;
++
++		pcie@0 {
++			reg = <0 0 0 0 0>;
++			#size-cells = <2>;
++			#address-cells = <3>;
++			device_type = "pci";
++			ranges = <0x02000000 0x0 0xa0000000
++				  0x02000000 0x0 0xa0000000
++				  0x0 0x20000000
++
++				  0x01000000 0x0 0x00000000
++				  0x01000000 0x0 0x00000000
++				  0x0 0x00100000>;
++		};
++	};
++};
+--- a/arch/powerpc/boot/dts/sequoia.dts
++++ b/arch/powerpc/boot/dts/sequoia.dts
+@@ -269,7 +269,6 @@
+ 			};
+ 
+ 			EMAC0: ethernet@ef600e00 {
+-				linux,network-index = <0>;
+ 				device_type = "network";
+ 				compatible = "ibm,emac-440epx", "ibm,emac4";
+ 				interrupt-parent = <&EMAC0>;
+@@ -285,7 +284,7 @@
+ 				mal-tx-channel = <0>;
+ 				mal-rx-channel = <0>;
+ 				cell-index = <0>;
+-				max-frame-size = <5dc>;
++				max-frame-size = <2328>;
+ 				rx-fifo-size = <1000>;
+ 				tx-fifo-size = <800>;
+ 				phy-mode = "rgmii";
+@@ -299,7 +298,6 @@
+ 			};
+ 
+ 			EMAC1: ethernet@ef600f00 {
+-				linux,network-index = <1>;
+ 				device_type = "network";
+ 				compatible = "ibm,emac-440epx", "ibm,emac4";
+ 				interrupt-parent = <&EMAC1>;
+@@ -315,7 +313,7 @@
+ 				mal-tx-channel = <1>;
+ 				mal-rx-channel = <1>;
+ 				cell-index = <1>;
+-				max-frame-size = <5dc>;
++				max-frame-size = <2328>;
+ 				rx-fifo-size = <1000>;
+ 				tx-fifo-size = <800>;
+ 				phy-mode = "rgmii";
+--- a/arch/powerpc/boot/dts/taishan.dts
++++ b/arch/powerpc/boot/dts/taishan.dts
+@@ -104,6 +104,16 @@
+ 		// FIXME: anything else?
+ 	};
+ 
++	L2C0: l2c {
++		compatible = "ibm,l2-cache-440gx", "ibm,l2-cache";
++		dcr-reg = <20 8			/* Internal SRAM DCR's */
++			   30 8>;		/* L2 cache DCR's */
++		cache-line-size = <20>;		/* 32 bytes */
++		cache-size = <40000>;		/* L2, 256K */
++		interrupt-parent = <&UIC2>;
++		interrupts = <17 1>;
++	};
++
+ 	plb {
+ 		compatible = "ibm,plb-440gx", "ibm,plb4";
+ 		#address-cells = <2>;
+@@ -232,10 +242,18 @@
+ 				reg = <40000790 8>;
+ 			};
+ 
++			TAH0: emac-tah@40000b50 {
++				compatible = "ibm,tah-440gx", "ibm,tah";
++				reg = <40000b50 30>;
++			};
++
++			TAH1: emac-tah@40000d50 {
++				compatible = "ibm,tah-440gx", "ibm,tah";
++				reg = <40000d50 30>;
++			};
+ 
+ 			EMAC0: ethernet@40000800 {
+ 				unused = <1>;
+-				linux,network-index = <2>;
+ 				device_type = "network";
+ 				compatible = "ibm,emac-440gx", "ibm,emac4";
+ 				interrupt-parent = <&UIC1>;
+@@ -256,7 +274,6 @@
+ 			};
+ 		 	EMAC1: ethernet@40000900 {
+ 				unused = <1>;
+-				linux,network-index = <3>;
+ 				device_type = "network";
+ 				compatible = "ibm,emac-440gx", "ibm,emac4";
+ 				interrupt-parent = <&UIC1>;
+@@ -277,7 +294,6 @@
+ 			};
+ 
+ 		 	EMAC2: ethernet@40000c00 {
+-				linux,network-index = <0>;
+ 				device_type = "network";
+ 				compatible = "ibm,emac-440gx", "ibm,emac4";
+ 				interrupt-parent = <&UIC2>;
+@@ -288,7 +304,7 @@
+ 				mal-tx-channel = <2>;
+ 				mal-rx-channel = <2>;
+ 				cell-index = <2>;
+-				max-frame-size = <5dc>;
++				max-frame-size = <2328>;
+ 				rx-fifo-size = <1000>;
+ 				tx-fifo-size = <800>;
+ 				phy-mode = "rgmii";
+@@ -297,10 +313,11 @@
+ 				rgmii-channel = <0>;
+  				zmii-device = <&ZMII0>;
+ 				zmii-channel = <2>;
++				tah-device = <&TAH0>;
++				tah-channel = <0>;
+ 			};
+ 
+ 		 	EMAC3: ethernet@40000e00 {
+-				linux,network-index = <1>;
+ 				device_type = "network";
+ 				compatible = "ibm,emac-440gx", "ibm,emac4";
+ 				interrupt-parent = <&UIC2>;
+@@ -311,7 +328,7 @@
+ 				mal-tx-channel = <3>;
+ 				mal-rx-channel = <3>;
+ 				cell-index = <3>;
+-				max-frame-size = <5dc>;
++				max-frame-size = <2328>;
+ 				rx-fifo-size = <1000>;
+ 				tx-fifo-size = <800>;
+ 				phy-mode = "rgmii";
+@@ -320,6 +337,8 @@
+ 				rgmii-channel = <1>;
+  				zmii-device = <&ZMII0>;
+ 				zmii-channel = <3>;
++				tah-device = <&TAH1>;
++				tah-channel = <0>;
+ 			};
+ 
+ 
+--- a/arch/powerpc/boot/dts/walnut.dts
++++ b/arch/powerpc/boot/dts/walnut.dts
+@@ -125,7 +125,6 @@
+ 			};
+ 
+ 			EMAC: ethernet@ef600800 {
+-				linux,network-index = <0>;
+ 				device_type = "network";
+ 				compatible = "ibm,emac-405gp", "ibm,emac";
+ 				interrupt-parent = <&UIC0>;
+--- a/arch/powerpc/boot/dts/warp.dts
++++ b/arch/powerpc/boot/dts/warp.dts
+@@ -204,7 +204,6 @@
+ 			};
+ 
+ 			EMAC0: ethernet@ef600e00 {
+-				linux,network-index = <0>;
+ 				device_type = "network";
+ 				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+ 				interrupt-parent = <&UIC1>;
+--- /dev/null
++++ b/arch/powerpc/boot/dts/yosemite.dts
+@@ -0,0 +1,304 @@
++/*
++ * Device Tree Source for AMCC Yosemite
++ *
++ * Copyright 2008 IBM Corp.
++ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2.  This program is licensed "as is" without
++ * any warranty of any kind, whether express or implied.
++ */
++
++/ {
++	#address-cells = <2>;
++	#size-cells = <1>;
++	model = "amcc,yosemite";
++	compatible = "amcc,yosemite","amcc,bamboo";
++	dcr-parent = <&/cpus/cpu@0>;
++
++	aliases {
++		ethernet0 = &EMAC0;
++		ethernet1 = &EMAC1;
++		serial0 = &UART0;
++		serial1 = &UART1;
++		serial2 = &UART2;
++		serial3 = &UART3;
++	};
++
++	cpus {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		cpu@0 {
++			device_type = "cpu";
++			model = "PowerPC,440EP";
++			reg = <0>;
++			clock-frequency = <0>; /* Filled in by zImage */
++			timebase-frequency = <0>; /* Filled in by zImage */
++			i-cache-line-size = <20>;
++			d-cache-line-size = <20>;
++			i-cache-size = <8000>;
++			d-cache-size = <8000>;
++			dcr-controller;
++			dcr-access-method = "native";
++		};
++	};
++
++	memory {
++		device_type = "memory";
++		reg = <0 0 0>; /* Filled in by zImage */
++	};
++
++	UIC0: interrupt-controller0 {
++		compatible = "ibm,uic-440ep","ibm,uic";
++		interrupt-controller;
++		cell-index = <0>;
++		dcr-reg = <0c0 009>;
++		#address-cells = <0>;
++		#size-cells = <0>;
++		#interrupt-cells = <2>;
++	};
++
++	UIC1: interrupt-controller1 {
++		compatible = "ibm,uic-440ep","ibm,uic";
++		interrupt-controller;
++		cell-index = <1>;
++		dcr-reg = <0d0 009>;
++		#address-cells = <0>;
++		#size-cells = <0>;
++		#interrupt-cells = <2>;
++		interrupts = <1e 4 1f 4>; /* cascade */
++		interrupt-parent = <&UIC0>;
++	};
++
++	SDR0: sdr {
++		compatible = "ibm,sdr-440ep";
++		dcr-reg = <00e 002>;
++	};
++
++	CPR0: cpr {
++		compatible = "ibm,cpr-440ep";
++		dcr-reg = <00c 002>;
++	};
++
++	plb {
++		compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4";
++		#address-cells = <2>;
++		#size-cells = <1>;
++		ranges;
++		clock-frequency = <0>; /* Filled in by zImage */
++
++		SDRAM0: sdram {
++			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
++			dcr-reg = <010 2>;
++		};
++
++		DMA0: dma {
++			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
++			dcr-reg = <100 027>;
++		};
++
++		MAL0: mcmal {
++			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
++			dcr-reg = <180 62>;
++			num-tx-chans = <4>;
++			num-rx-chans = <2>;
++			interrupt-parent = <&MAL0>;
++			interrupts = <0 1 2 3 4>;
++			#interrupt-cells = <1>;
++			#address-cells = <0>;
++			#size-cells = <0>;
++			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
++					/*RXEOB*/ 1 &UIC0 b 4
++					/*SERR*/  2 &UIC1 0 4
++					/*TXDE*/  3 &UIC1 1 4
++					/*RXDE*/  4 &UIC1 2 4>;
++		};
++
++		POB0: opb {
++			compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
++			#address-cells = <1>;
++			#size-cells = <1>;
++			/* Bamboo is oddball in the 44x world and doesn't use the ERPN
++			 * bits.
++			 */
++			ranges = <00000000 0 00000000 80000000
++			          80000000 0 80000000 80000000>;
++			interrupt-parent = <&UIC1>;
++			interrupts = <7 4>;
++			clock-frequency = <0>; /* Filled in by zImage */
++
++			EBC0: ebc {
++				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
++				dcr-reg = <012 2>;
++				#address-cells = <2>;
++				#size-cells = <1>;
++				clock-frequency = <0>; /* Filled in by zImage */
++				interrupts = <5 1>;
++				interrupt-parent = <&UIC1>;
++			};
++
++			UART0: serial@ef600300 {
++				device_type = "serial";
++				compatible = "ns16550";
++				reg = <ef600300 8>;
++				virtual-reg = <ef600300>;
++				clock-frequency = <0>; /* Filled in by zImage */
++				current-speed = <1c200>;
++				interrupt-parent = <&UIC0>;
++				interrupts = <0 4>;
++			};
++
++			UART1: serial@ef600400 {
++				device_type = "serial";
++				compatible = "ns16550";
++				reg = <ef600400 8>;
++				virtual-reg = <ef600400>;
++				clock-frequency = <0>;
++				current-speed = <0>;
++				interrupt-parent = <&UIC0>;
++				interrupts = <1 4>;
++			};
++
++			UART2: serial@ef600500 {
++				device_type = "serial";
++				compatible = "ns16550";
++				reg = <ef600500 8>;
++				virtual-reg = <ef600500>;
++				clock-frequency = <0>;
++				current-speed = <0>;
++				interrupt-parent = <&UIC0>;
++				interrupts = <3 4>;
++				status = "disabled";
++			};
++
++			UART3: serial@ef600600 {
++				device_type = "serial";
++				compatible = "ns16550";
++				reg = <ef600600 8>;
++				virtual-reg = <ef600600>;
++				clock-frequency = <0>;
++				current-speed = <0>;
++				interrupt-parent = <&UIC0>;
++				interrupts = <4 4>;
++				status = "disabled";
++			};
++
++			IIC0: i2c@ef600700 {
++				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
++				reg = <ef600700 14>;
++				interrupt-parent = <&UIC0>;
++				interrupts = <2 4>;
++			};
++
++			IIC1: i2c@ef600800 {
++				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
++				reg = <ef600800 14>;
++				interrupt-parent = <&UIC0>;
++				interrupts = <7 4>;
++			};
++
++			spi@ef600900 {
++				compatible = "amcc,spi-440ep";
++				reg = <ef600900 6>;
++				interrupts = <8 4>;
++				interrupt-parent = <&UIC0>;
++			};
++
++			ZMII0: emac-zmii@ef600d00 {
++				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
++				reg = <ef600d00 c>;
++			};
++
++			EMAC0: ethernet@ef600e00 {
++				device_type = "network";
++				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
++				interrupt-parent = <&UIC1>;
++				interrupts = <1c 4 1d 4>;
++				reg = <ef600e00 70>;
++				local-mac-address = [000000000000];
++				mal-device = <&MAL0>;
++				mal-tx-channel = <0 1>;
++				mal-rx-channel = <0>;
++				cell-index = <0>;
++				max-frame-size = <5dc>;
++				rx-fifo-size = <1000>;
++				tx-fifo-size = <800>;
++				phy-mode = "rmii";
++				phy-map = <00000000>;
++				zmii-device = <&ZMII0>;
++				zmii-channel = <0>;
++			};
++
++			EMAC1: ethernet@ef600f00 {
++				device_type = "network";
++				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
++				interrupt-parent = <&UIC1>;
++				interrupts = <1e 4 1f 4>;
++				reg = <ef600f00 70>;
++				local-mac-address = [000000000000];
++				mal-device = <&MAL0>;
++				mal-tx-channel = <2 3>;
++				mal-rx-channel = <1>;
++				cell-index = <1>;
++				max-frame-size = <5dc>;
++				rx-fifo-size = <1000>;
++				tx-fifo-size = <800>;
++				phy-mode = "rmii";
++				phy-map = <00000000>;
++				zmii-device = <&ZMII0>;
++				zmii-channel = <1>;
++			};
++
++			usb@ef601000 {
++				compatible = "ohci-be";
++				reg = <ef601000 80>;
++				interrupts = <8 4 9 4>;
++				interrupt-parent = < &UIC1 >;
++			};
++		};
++
++		PCI0: pci@ec000000 {
++			device_type = "pci";
++			#interrupt-cells = <1>;
++			#size-cells = <2>;
++			#address-cells = <3>;
++			compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
++			primary;
++			reg = <0 eec00000 8	/* Config space access */
++			       0 eed00000 4	/* IACK */
++			       0 eed00000 4	/* Special cycle */
++			       0 ef400000 40>;	/* Internal registers */
++
++			/* Outbound ranges, one memory and one IO,
++			 * later cannot be changed. Chip supports a second
++			 * IO range but we don't use it for now
++			 */
++			ranges = <02000000 0 a0000000 0 a0000000 0 20000000
++				  01000000 0 00000000 0 e8000000 0 00010000>;
++
++			/* Inbound 2GB range starting at 0 */
++			dma-ranges = <42000000 0 0 0 0 0 80000000>;
++
++			/* Bamboo has all 4 IRQ pins tied together per slot */
++			interrupt-map-mask = <f800 0 0 0>;
++			interrupt-map = <
++				/* IDSEL 1 */
++				0800 0 0 0 &UIC0 1c 8
++
++				/* IDSEL 2 */
++				1000 0 0 0 &UIC0 1b 8
++
++				/* IDSEL 3 */
++				1800 0 0 0 &UIC0 1a 8
++
++				/* IDSEL 4 */
++				2000 0 0 0 &UIC0 19 8
++			>;
++		};
++	};
++
++	chosen {
++		linux,stdout-path = "/plb/opb/serial@ef600300";
++	};
++};
+--- a/arch/powerpc/boot/ebony.c
++++ b/arch/powerpc/boot/ebony.c
+@@ -75,7 +75,8 @@ static void ebony_fixups(void)
+ 
+ 	ibm440gp_fixup_clocks(sysclk, 6 * 1843200);
+ 	ibm4xx_sdram_fixup_memsize();
+-	dt_fixup_mac_addresses(ebony_mac0, ebony_mac1);
++	dt_fixup_mac_address_by_alias("ethernet0", ebony_mac0);
++	dt_fixup_mac_address_by_alias("ethernet1", ebony_mac1);
+ 	ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
+ 	ebony_flashsel_fixup();
+ }
+--- a/arch/powerpc/boot/libfdt-wrapper.c
++++ b/arch/powerpc/boot/libfdt-wrapper.c
+@@ -35,7 +35,7 @@
+ #define check_err(err) \
+ 	({ \
+ 		if (BAD_ERROR(err) || ((err < 0) && DEBUG)) \
+-			printf("%s():%d  %s\n\r", __FUNCTION__, __LINE__, \
++			printf("%s():%d  %s\n\r", __func__, __LINE__, \
+ 			       fdt_strerror(err)); \
+ 		if (BAD_ERROR(err)) \
+ 			exit(); \
+--- a/arch/powerpc/boot/mpc52xx-psc.c
++++ b/arch/powerpc/boot/mpc52xx-psc.c
+@@ -51,14 +51,9 @@ static unsigned char psc_getc(void)
+ 
+ int mpc5200_psc_console_init(void *devp, struct serial_console_data *scdp)
+ {
+-	int n;
+-
+ 	/* Get the base address of the psc registers */
+-	n = getprop(devp, "virtual-reg", &psc, sizeof(psc));
+-	if (n != sizeof(psc)) {
+-		if (!dt_xlate_reg(devp, 0, (void *)&psc, NULL))
+-			return -1;
+-	}
++	if (dt_get_virtual_reg(devp, &psc, 1) < 1)
++		return -1;
+ 
+ 	scdp->open = psc_open;
+ 	scdp->putc = psc_putc;
+--- a/arch/powerpc/boot/mpsc.c
++++ b/arch/powerpc/boot/mpsc.c
+@@ -141,7 +141,7 @@ int mpsc_console_init(void *devp, struct
+ 	if (mpscintr_base == NULL)
+ 		goto err_out;
+ 
+-	n = getprop(devp, "block-index", &v, sizeof(v));
++	n = getprop(devp, "cell-index", &v, sizeof(v));
+ 	if (n != sizeof(v))
+ 		goto err_out;
+ 	reg_set = (int)v;
+--- a/arch/powerpc/boot/mv64x60.c
++++ b/arch/powerpc/boot/mv64x60.c
+@@ -535,7 +535,7 @@ u8 *mv64x60_get_bridge_pbase(void)
+ 	u32 v[2];
+ 	void *devp;
+ 
+-	devp = finddevice("/mv64x60");
++	devp = find_node_by_compatible(NULL, "marvell,mv64360");
+ 	if (devp == NULL)
+ 		goto err_out;
+ 	if (getprop(devp, "reg", v, sizeof(v)) != sizeof(v))
+@@ -553,7 +553,7 @@ u8 *mv64x60_get_bridge_base(void)
+ 	u32 v;
+ 	void *devp;
+ 
+-	devp = finddevice("/mv64x60");
++	devp = find_node_by_compatible(NULL, "marvell,mv64360");
+ 	if (devp == NULL)
+ 		goto err_out;
+ 	if (getprop(devp, "virtual-reg", &v, sizeof(v)) != sizeof(v))
+--- a/arch/powerpc/boot/mv64x60_i2c.c
++++ b/arch/powerpc/boot/mv64x60_i2c.c
+@@ -185,7 +185,7 @@ int mv64x60_i2c_open(void)
+ 	u32 v;
+ 	void *devp;
+ 
+-	devp = finddevice("/mv64x60/i2c");
++	devp = find_node_by_compatible(NULL, "marvell,mv64360-i2c");
+ 	if (devp == NULL)
+ 		goto err_out;
+ 	if (getprop(devp, "virtual-reg", &v, sizeof(v)) != sizeof(v))
+--- a/arch/powerpc/boot/ns16550.c
++++ b/arch/powerpc/boot/ns16550.c
+@@ -55,15 +55,9 @@ static u8 ns16550_tstc(void)
+ int ns16550_console_init(void *devp, struct serial_console_data *scdp)
+ {
+ 	int n;
+-	unsigned long reg_phys;
+ 
+-	n = getprop(devp, "virtual-reg", &reg_base, sizeof(reg_base));
+-	if (n != sizeof(reg_base)) {
+-		if (!dt_xlate_reg(devp, 0, &reg_phys, NULL))
+-			return -1;
+-
+-		reg_base = (void *)reg_phys;
+-	}
++	if (dt_get_virtual_reg(devp, (void **)&reg_base, 1) < 1)
++		return -1;
+ 
+ 	n = getprop(devp, "reg-shift", &reg_shift, sizeof(reg_shift));
+ 	if (n != sizeof(reg_shift))
+--- a/arch/powerpc/boot/ops.h
++++ b/arch/powerpc/boot/ops.h
+@@ -95,6 +95,7 @@ int dt_xlate_reg(void *node, int res, un
+ int dt_xlate_addr(void *node, u32 *buf, int buflen, unsigned long *xlated_addr);
+ int dt_is_compatible(void *node, const char *compat);
+ void dt_get_reg_format(void *node, u32 *naddr, u32 *nsize);
++int dt_get_virtual_reg(void *node, void **addr, int nres);
+ 
+ static inline void *finddevice(const char *name)
+ {
+--- a/arch/powerpc/boot/prpmc2800.c
++++ b/arch/powerpc/boot/prpmc2800.c
+@@ -344,20 +344,20 @@ static void prpmc2800_bridge_setup(u32 m
+ 			acc_bits);
+ 
+ 	/* Get the cpu -> pci i/o & mem mappings from the device tree */
+-	devp = finddevice("/mv64x60/pci@80000000");
++	devp = find_node_by_compatible(NULL, "marvell,mv64360-pci");
+ 	if (devp == NULL)
+-		fatal("Error: Missing /mv64x60/pci@80000000"
++		fatal("Error: Missing marvell,mv64360-pci"
+ 				" device tree node\n\r");
+ 
+ 	rc = getprop(devp, "ranges", v, sizeof(v));
+ 	if (rc != sizeof(v))
+-		fatal("Error: Can't find /mv64x60/pci@80000000/ranges"
++		fatal("Error: Can't find marvell,mv64360-pci ranges"
+ 				" property\n\r");
+ 
+ 	/* Get the cpu -> pci i/o & mem mappings from the device tree */
+-	devp = finddevice("/mv64x60");
++	devp = find_node_by_compatible(NULL, "marvell,mv64360");
+ 	if (devp == NULL)
+-		fatal("Error: Missing /mv64x60 device tree node\n\r");
++		fatal("Error: Missing marvell,mv64360 device tree node\n\r");
+ 
+ 	enables = in_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE));
+ 	enables |= 0x0007fe00; /* Disable all cpu->pci windows */
+@@ -429,9 +429,9 @@ static void prpmc2800_fixups(void)
+ 	setprop(devp, "model", model, l);
+ 
+ 	/* Set /cpus/PowerPC,7447/clock-frequency */
+-	devp = finddevice("/cpus/PowerPC,7447");
++	devp = find_node_by_prop_value_str(NULL, "device_type", "cpu");
+ 	if (devp == NULL)
+-		fatal("Error: Missing proper /cpus device tree node\n\r");
++		fatal("Error: Missing proper cpu device tree node\n\r");
+ 	v[0] = bip->core_speed;
+ 	setprop(devp, "clock-frequency", &v[0], sizeof(v[0]));
+ 
+@@ -443,16 +443,17 @@ static void prpmc2800_fixups(void)
+ 	v[1] = bip->mem_size;
+ 	setprop(devp, "reg", v, sizeof(v));
+ 
+-	/* Update /mv64x60/model, if this is a mv64362 */
++	/* Update model, if this is a mv64362 */
+ 	if (bip->bridge_type == BRIDGE_TYPE_MV64362) {
+-		devp = finddevice("/mv64x60");
++		devp = find_node_by_compatible(NULL, "marvell,mv64360");
+ 		if (devp == NULL)
+-			fatal("Error: Missing /mv64x60 device tree node\n\r");
++			fatal("Error: Missing marvell,mv64360"
++					" device tree node\n\r");
+ 		setprop(devp, "model", "mv64362", strlen("mv64362") + 1);
+ 	}
+ 
+ 	/* Set User FLASH size */
+-	devp = finddevice("/mv64x60/flash@a0000000");
++	devp = find_node_by_compatible(NULL, "direct-mapped");
+ 	if (devp == NULL)
+ 		fatal("Error: Missing User FLASH device tree node\n\r");
+ 	rc = getprop(devp, "reg", v, sizeof(v));
+--- a/arch/powerpc/boot/ps3-head.S
++++ b/arch/powerpc/boot/ps3-head.S
+@@ -27,8 +27,9 @@
+ /*
+  * __system_reset_overlay - The PS3 first stage entry.
+  *
+- * The bootwraper build script copies the 0x100 bytes at symbol
+- * __system_reset_overlay to offset 0x100 of the rom image.
++ * The bootwraper build script copies the 512 bytes at symbol
++ * __system_reset_overlay to offset 0x100 of the rom image.  This symbol
++ * must occupy 512 or less bytes.
+  *
+  * The PS3 has a single processor with two threads.
+  */
+@@ -47,8 +48,6 @@ __system_reset_overlay:
+ 
+ 	mfspr	r3, 0x88
+ 	cntlzw.	r3, r3
+-	li	r4, 0
+-	li	r5, 0
+ 	beq	1f
+ 
+ 	/* Secondary goes to __secondary_hold in kernel. */
+@@ -57,8 +56,14 @@ __system_reset_overlay:
+ 	mtctr	r4
+ 	bctr
+ 
+-	/* Primary delays then goes to _zimage_start in wrapper. */
+ 1:
++	/* Save the value at addr zero for a null pointer write check later. */
++
++	li	r4, 0
++	lwz	r3, 0(r4)
++
++	/* Primary delays then goes to _zimage_start in wrapper. */
++
+ 	or	31, 31, 31 /* db16cyc */
+ 	or	31, 31, 31 /* db16cyc */
+ 
+@@ -67,16 +72,18 @@ __system_reset_overlay:
+ 	mtctr	r4
+ 	bctr
+ 
++	. = __system_reset_overlay + 512
++
+ /*
+  * __system_reset_kernel - Place holder for the kernel reset vector.
+  *
+- * The bootwrapper build script copies 0x100 bytes from offset 0x100
++ * The bootwrapper build script copies 512 bytes from offset 0x100
+  * of the rom image to the symbol __system_reset_kernel.  At runtime
+- * the bootwrapper program copies the 0x100 bytes at __system_reset_kernel
+- * to ram address 0x100.  This symbol must occupy 0x100 bytes.
++ * the bootwrapper program copies the 512 bytes at __system_reset_kernel
++ * to ram address 0x100.  This symbol must occupy 512 bytes.
+  */
+ 
+ 	.globl __system_reset_kernel
+ __system_reset_kernel:
+ 
+-	. = __system_reset_kernel + 0x100
++	. = __system_reset_kernel + 512
+--- a/arch/powerpc/boot/ps3.c
++++ b/arch/powerpc/boot/ps3.c
+@@ -27,10 +27,10 @@
+ #include "page.h"
+ #include "ops.h"
+ 
+-extern s64 lv1_panic(u64 in_1);
+-extern s64 lv1_get_logical_partition_id(u64 *out_1);
+-extern s64 lv1_get_logical_ppe_id(u64 *out_1);
+-extern s64 lv1_get_repository_node_value(u64 in_1, u64 in_2, u64 in_3,
++extern int lv1_panic(u64 in_1);
++extern int lv1_get_logical_partition_id(u64 *out_1);
++extern int lv1_get_logical_ppe_id(u64 *out_1);
++extern int lv1_get_repository_node_value(u64 in_1, u64 in_2, u64 in_3,
+ 	u64 in_4, u64 in_5, u64 *out_1, u64 *out_2);
+ 
+ #ifdef DEBUG
+@@ -46,6 +46,7 @@ BSS_STACK(4096);
+  * edit the command line passed to vmlinux (by setting /chosen/bootargs).
+  * The buffer is put in it's own section so that tools may locate it easier.
+  */
++
+ static char cmdline[COMMAND_LINE_SIZE]
+ 	__attribute__((__section__("__builtin_cmdline")));
+ 
+@@ -75,7 +76,7 @@ static void ps3_exit(void)
+ 
+ static int ps3_repository_read_rm_size(u64 *rm_size)
+ {
+-	s64 result;
++	int result;
+ 	u64 lpar_id;
+ 	u64 ppe_id;
+ 	u64 v2;
+@@ -114,16 +115,17 @@ void ps3_copy_vectors(void)
+ {
+ 	extern char __system_reset_kernel[];
+ 
+-	memcpy((void *)0x100, __system_reset_kernel, 0x100);
+-	flush_cache((void *)0x100, 0x100);
++	memcpy((void *)0x100, __system_reset_kernel, 512);
++	flush_cache((void *)0x100, 512);
+ }
+ 
+-void platform_init(void)
++void platform_init(unsigned long null_check)
+ {
+ 	const u32 heapsize = 0x1000000 - (u32)_end; /* 16MiB */
+ 	void *chosen;
+ 	unsigned long ft_addr;
+ 	u64 rm_size;
++	unsigned long val;
+ 
+ 	console_ops.write = ps3_console_write;
+ 	platform_ops.exit = ps3_exit;
+@@ -151,6 +153,11 @@ void platform_init(void)
+ 
+ 	printf(" flat tree at 0x%lx\n\r", ft_addr);
+ 
++	val = *(unsigned long *)0;
++
++	if (val != null_check)
++		printf("null check failed: %lx != %lx\n\r", val, null_check);
++
+ 	((kernel_entry_t)0)(ft_addr, 0, NULL);
+ 
+ 	ps3_exit();
+--- a/arch/powerpc/boot/serial.c
++++ b/arch/powerpc/boot/serial.c
+@@ -119,7 +119,7 @@ int serial_console_init(void)
+ 
+ 	if (dt_is_compatible(devp, "ns16550"))
+ 		rc = ns16550_console_init(devp, &serial_cd);
+-	else if (dt_is_compatible(devp, "marvell,mpsc"))
++	else if (dt_is_compatible(devp, "marvell,mv64360-mpsc"))
+ 		rc = mpsc_console_init(devp, &serial_cd);
+ 	else if (dt_is_compatible(devp, "fsl,cpm1-scc-uart") ||
+ 	         dt_is_compatible(devp, "fsl,cpm1-smc-uart") ||
+--- /dev/null
++++ b/arch/powerpc/boot/simpleboot.c
+@@ -0,0 +1,84 @@
++/*
++ * The simple platform -- for booting when firmware doesn't supply a device
++ *                        tree or any platform configuration information.
++ *                        All data is extracted from an embedded device tree
++ *                        blob.
++ *
++ * Authors: Scott Wood <scottwood@freescale.com>
++ *          Grant Likely <grant.likely@secretlab.ca>
++ *
++ * Copyright (c) 2007 Freescale Semiconductor, Inc.
++ * Copyright (c) 2008 Secret Lab Technologies Ltd.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include "ops.h"
++#include "types.h"
++#include "io.h"
++#include "stdio.h"
++#include "libfdt/libfdt.h"
++
++BSS_STACK(4*1024);
++
++void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
++		   unsigned long r6, unsigned long r7)
++{
++	const u32 *na, *ns, *reg, *timebase;
++	u64 memsize64;
++	int node, size, i;
++
++	/* Make sure FDT blob is sane */
++	if (fdt_check_header(_dtb_start) != 0)
++		fatal("Invalid device tree blob\n");
++
++	/* Find the #address-cells and #size-cells properties */
++	node = fdt_path_offset(_dtb_start, "/");
++	if (node < 0)
++		fatal("Cannot find root node\n");
++	na = fdt_getprop(_dtb_start, node, "#address-cells", &size);
++	if (!na || (size != 4))
++		fatal("Cannot find #address-cells property");
++	ns = fdt_getprop(_dtb_start, node, "#size-cells", &size);
++	if (!ns || (size != 4))
++		fatal("Cannot find #size-cells property");
++
++	/* Find the memory range */
++	node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type",
++					     "memory", sizeof("memory"));
++	if (node < 0)
++		fatal("Cannot find memory node\n");
++	reg = fdt_getprop(_dtb_start, node, "reg", &size);
++	if (size < (*na+*ns) * sizeof(u32))
++		fatal("cannot get memory range\n");
++
++	/* Only interested in memory based at 0 */
++	for (i = 0; i < *na; i++)
++		if (*reg++ != 0)
++			fatal("Memory range is not based at address 0\n");
++
++	/* get the memsize and trucate it to under 4G on 32 bit machines */
++	memsize64 = 0;
++	for (i = 0; i < *ns; i++)
++		memsize64 = (memsize64 << 32) | *reg++;
++	if (sizeof(void *) == 4 && memsize64 >= 0x100000000ULL)
++		memsize64 = 0xffffffff;
++
++	/* finally, setup the timebase */
++	node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type",
++					     "cpu", sizeof("cpu"));
++	if (!node)
++		fatal("Cannot find cpu node\n");
++	timebase = fdt_getprop(_dtb_start, node, "timebase-frequency", &size);
++	if (timebase && (size == 4))
++		timebase_period_ns = 1000000000 / *timebase;
++
++	/* Now we have the memory size; initialize the heap */
++	simple_alloc_init(_end, memsize64 - (unsigned long)_end, 32, 64);
++
++	/* prepare the device tree and find the console */
++	fdt_init(_dtb_start);
++	serial_console_init();
++}
+--- a/arch/powerpc/boot/treeboot-walnut.c
++++ b/arch/powerpc/boot/treeboot-walnut.c
+@@ -68,7 +68,7 @@ static void walnut_fixups(void)
+ 	ibm4xx_quiesce_eth((u32 *)0xef600800, NULL);
+ 	ibm4xx_fixup_ebc_ranges("/plb/ebc");
+ 	walnut_flashsel_fixup();
+-	dt_fixup_mac_addresses((u8 *) WALNUT_OPENBIOS_MAC_OFF);
++	dt_fixup_mac_address_by_alias("ethernet0", (u8 *) WALNUT_OPENBIOS_MAC_OFF);
+ }
+ 
+ void platform_init(void)
+--- /dev/null
++++ b/arch/powerpc/boot/virtex405-head.S
+@@ -0,0 +1,30 @@
++#include "ppc_asm.h"
++
++	.text
++	.global _zimage_start
++_zimage_start:
++
++	/* PPC errata 213: needed by Virtex-4 FX */
++	mfccr0  0
++	oris    0,0,0x50000000@h
++	mtccr0  0
++
++	/*
++	 * Invalidate the data cache if the data cache is turned off.
++	 * - The 405 core does not invalidate the data cache on power-up
++	 *   or reset but does turn off the data cache. We cannot assume
++	 *   that the cache contents are valid.
++	 * - If the data cache is turned on this must have been done by
++	 *   a bootloader and we assume that the cache contents are
++	 *   valid.
++	 */
++	mfdccr	r9
++	cmplwi	r9,0
++	bne	2f
++	lis	r9,0
++	li	r8,256
++	mtctr	r8
++1:	dccci	r0,r9
++	addi	r9,r9,0x20
++	bdnz	1b
++2:	b	_zimage_start_lib
+--- a/arch/powerpc/boot/wrapper
++++ b/arch/powerpc/boot/wrapper
+@@ -174,7 +174,7 @@ cuboot*)
+     *-mpc83*)
+         platformo=$object/cuboot-83xx.o
+         ;;
+-    *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555)
++    *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555|*-ksi8560*)
+         platformo=$object/cuboot-85xx-cpm2.o
+         ;;
+     *-mpc85*|*-tqm8540|*-sbc85*)
+@@ -199,6 +199,10 @@ adder875-redboot)
+     platformo="$object/fixed-head.o $object/redboot-8xx.o"
+     binary=y
+     ;;
++simpleboot-virtex405-*)
++    platformo="$object/virtex405-head.o $object/simpleboot.o"
++    binary=y
++    ;;
+ esac
+ 
+ vmz="$tmpdir/`basename \"$kernel\"`.$ext"
+@@ -226,10 +230,13 @@ if [ -n "$version" ]; then
+     uboot_version="-n Linux-$version"
+ fi
+ 
++# physical offset of kernel image
++membase=`${CROSS}objdump -p "$kernel" | grep -m 1 LOAD | awk '{print $7}'`
++
+ case "$platform" in
+ uboot)
+     rm -f "$ofile"
+-    mkimage -A ppc -O linux -T kernel -C gzip -a 00000000 -e 00000000 \
++    mkimage -A ppc -O linux -T kernel -C gzip -a $membase -e $membase \
+ 	$uboot_version -d "$vmz" "$ofile"
+     if [ -z "$cacheit" ]; then
+ 	rm -f "$vmz"
+@@ -298,15 +305,16 @@ treeboot*)
+     exit 0
+     ;;
+ ps3)
+-    # The ps3's loader supports loading gzipped binary images from flash
+-    # rom to addr zero. The loader enters the image at addr 0x100.  A
+-    # bootwrapper overlay is use to arrange for the kernel to be loaded
+-    # to addr zero and to have a suitable bootwrapper entry at 0x100.
+-    # To construct the rom image, 0x100 bytes from offset 0x100 in the
+-    # kernel is copied to the bootwrapper symbol __system_reset_kernel.
+-    # The 0x100 bytes at the bootwrapper symbol __system_reset_overlay is
+-    # then copied to offset 0x100.  At runtime the bootwrapper program
+-    # copies the 0x100 bytes at __system_reset_kernel to addr 0x100.
++    # The ps3's loader supports loading a gzipped binary image from flash
++    # rom to ram addr zero. The loader then enters the system reset
++    # vector at addr 0x100.  A bootwrapper overlay is used to arrange for
++    # a binary image of the kernel to be at addr zero, and yet have a
++    # suitable bootwrapper entry at 0x100.  To construct the final rom
++    # image 512 bytes from offset 0x100 is copied to the bootwrapper
++    # place holder at symbol __system_reset_kernel.  The 512 bytes of the
++    # bootwrapper entry code at symbol __system_reset_overlay is then
++    # copied to offset 0x100.  At runtime the bootwrapper program copies
++    # the data at __system_reset_kernel back to addr 0x100.
+ 
+     system_reset_overlay=0x`${CROSS}nm "$ofile" \
+         | grep ' __system_reset_overlay$'       \
+@@ -317,7 +325,7 @@ ps3)
+         | cut -d' ' -f1`
+     system_reset_kernel=`printf "%d" $system_reset_kernel`
+     overlay_dest="256"
+-    overlay_size="256"
++    overlay_size="512"
+ 
+     ${CROSS}objcopy -O binary "$ofile" "$ofile.bin"
+ 
+--- /dev/null
++++ b/arch/powerpc/configs/40x/ep405_defconfig
+@@ -0,0 +1,968 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc2
++# Fri Feb 15 21:50:09 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++# CONFIG_6xx is not set
++# CONFIG_PPC_85xx is not set
++# CONFIG_PPC_8xx is not set
++CONFIG_40x=y
++# CONFIG_44x is not set
++# CONFIG_E200 is not set
++CONFIG_4xx=y
++# CONFIG_PPC_MM_SLICES is not set
++CONFIG_NOT_COHERENT_CACHE=y
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++# CONFIG_DEFAULT_UIMAGE is not set
++CONFIG_PPC_DCR_NATIVE=y
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_PPC_DCR=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++CONFIG_FAIR_GROUP_SCHED=y
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++CONFIG_KALLSYMS_ALL=y
++CONFIG_KALLSYMS_EXTRA_PASS=y
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++CONFIG_BLOCK=y
++CONFIG_LBD=y
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++# CONFIG_PREEMPT_RCU is not set
++# CONFIG_PPC4xx_PCI_EXPRESS is not set
++
++#
++# Platform support
++#
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++CONFIG_EP405=y
++# CONFIG_KILAUEA is not set
++# CONFIG_MAKALU is not set
++# CONFIG_WALNUT is not set
++# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
++CONFIG_405GP=y
++CONFIG_IBM405_ERR77=y
++CONFIG_IBM405_ERR51=y
++# CONFIG_IPIC is not set
++# CONFIG_MPIC is not set
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++# CONFIG_FSL_ULI1575 is not set
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++# CONFIG_TICK_ONESHOT is not set
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_RCU_TRACE=y
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_MATH_EMULATION is not set
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_PROC_DEVICETREE=y
++# CONFIG_CMDLINE_BOOL is not set
++# CONFIG_PM is not set
++CONFIG_SECCOMP=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++# CONFIG_PCIEPORTBUS is not set
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++CONFIG_PCI_LEGACY=y
++# CONFIG_PCI_DEBUG is not set
++# CONFIG_PCCARD is not set
++# CONFIG_HOTPLUG_PCI is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_CONSISTENT_START=0xff100000
++CONFIG_CONSISTENT_SIZE=0x00200000
++CONFIG_BOOT_LOAD=0x00400000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++CONFIG_CONNECTOR=y
++CONFIG_PROC_EVENTS=y
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_OF_PARTS=y
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=m
++CONFIG_MTD_BLOCK=m
++# CONFIG_MTD_BLOCK_RO is not set
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++CONFIG_MTD_JEDECPROBE=y
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PHYSMAP is not set
++CONFIG_MTD_PHYSMAP_OF=y
++# CONFIG_MTD_INTEL_VR_NOR is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_PMC551 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++# CONFIG_BLK_DEV_LOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++# CONFIG_BLK_DEV_UB is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=35000
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_XILINX_SYSACE is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_SGI_IOC4 is not set
++# CONFIG_TIFM_CORE is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++# CONFIG_PHYLIB is not set
++CONFIG_NET_ETHERNET=y
++# CONFIG_MII is not set
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++CONFIG_IBM_NEW_EMAC=y
++CONFIG_IBM_NEW_EMAC_RXB=128
++CONFIG_IBM_NEW_EMAC_TXB=64
++CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
++CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
++CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
++# CONFIG_IBM_NEW_EMAC_DEBUG is not set
++CONFIG_IBM_NEW_EMAC_ZMII=y
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_NET_PCI is not set
++# CONFIG_B44 is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++# CONFIG_E1000 is not set
++# CONFIG_E1000E is not set
++# CONFIG_E1000E_ENABLED is not set
++# CONFIG_IP1000 is not set
++# CONFIG_IGB is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++# CONFIG_R8169 is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_VIA_VELOCITY is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++# CONFIG_QLA3XXX is not set
++# CONFIG_ATL1 is not set
++CONFIG_NETDEV_10000=y
++# CONFIG_CHELSIO_T1 is not set
++# CONFIG_CHELSIO_T3 is not set
++# CONFIG_IXGBE is not set
++# CONFIG_IXGB is not set
++# CONFIG_S2IO is not set
++# CONFIG_MYRI10GE is not set
++# CONFIG_NETXEN_NIC is not set
++# CONFIG_NIU is not set
++# CONFIG_MLX4_CORE is not set
++# CONFIG_TEHUTI is not set
++# CONFIG_BNX2X is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++# CONFIG_INPUT is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_PCI=y
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++CONFIG_SERIAL_8250_EXTENDED=y
++# CONFIG_SERIAL_8250_MANY_PORTS is not set
++CONFIG_SERIAL_8250_SHARE_IRQ=y
++# CONFIG_SERIAL_8250_DETECT_IRQ is not set
++# CONFIG_SERIAL_8250_RSA is not set
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_JSM is not set
++CONFIG_SERIAL_OF_PLATFORM=y
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_NVRAM is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++# CONFIG_I2C is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++CONFIG_THERMAL=y
++# CONFIG_WATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=m
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
++
++#
++# Miscellaneous USB options
++#
++CONFIG_USB_DEVICEFS=y
++CONFIG_USB_DEVICE_CLASS=y
++# CONFIG_USB_DYNAMIC_MINORS is not set
++# CONFIG_USB_OTG is not set
++
++#
++# USB Host Controller Drivers
++#
++# CONFIG_USB_EHCI_HCD is not set
++# CONFIG_USB_ISP116X_HCD is not set
++CONFIG_USB_OHCI_HCD=y
++CONFIG_USB_OHCI_HCD_PPC_OF=y
++CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
++CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
++CONFIG_USB_OHCI_HCD_PCI=y
++CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
++CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
++CONFIG_USB_OHCI_LITTLE_ENDIAN=y
++# CONFIG_USB_UHCI_HCD is not set
++# CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
++
++#
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++# CONFIG_USB_PRINTER is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# may also be needed; see USB_STORAGE Help for more information
++#
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++CONFIG_USB_MON=y
++
++#
++# USB port drivers
++#
++# CONFIG_USB_SERIAL is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_AUERSWALD is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_PHIDGET is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++# CONFIG_USB_TEST is not set
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++# CONFIG_RTC_CLASS is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4DEV_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_JFFS2_FS is not set
++CONFIG_CRAMFS=y
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_DEBUG_STACKOVERFLOW is not set
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++# CONFIG_DEBUGGER is not set
++# CONFIG_VIRQ_DEBUG is not set
++# CONFIG_BDI_SWITCH is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++# CONFIG_CRYPTO_SEQIV is not set
++CONFIG_CRYPTO_MANAGER=y
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++CONFIG_CRYPTO_ECB=y
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=y
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_CRYPTO_DEV_HIFN_795X is not set
++# CONFIG_PPC_CLOCK is not set
+--- /dev/null
++++ b/arch/powerpc/configs/40x/kilauea_defconfig
+@@ -0,0 +1,839 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc2
++# Fri Feb 15 21:51:43 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++# CONFIG_6xx is not set
++# CONFIG_PPC_85xx is not set
++# CONFIG_PPC_8xx is not set
++CONFIG_40x=y
++# CONFIG_44x is not set
++# CONFIG_E200 is not set
++CONFIG_4xx=y
++# CONFIG_PPC_MM_SLICES is not set
++CONFIG_NOT_COHERENT_CACHE=y
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++# CONFIG_DEFAULT_UIMAGE is not set
++CONFIG_PPC_DCR_NATIVE=y
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_PPC_DCR=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++# CONFIG_FAIR_GROUP_SCHED is not set
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++CONFIG_KALLSYMS_ALL=y
++CONFIG_KALLSYMS_EXTRA_PASS=y
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++CONFIG_BLOCK=y
++CONFIG_LBD=y
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++# CONFIG_PREEMPT_RCU is not set
++CONFIG_PPC4xx_PCI_EXPRESS=y
++
++#
++# Platform support
++#
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++# CONFIG_EP405 is not set
++CONFIG_KILAUEA=y
++# CONFIG_MAKALU is not set
++# CONFIG_WALNUT is not set
++# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
++CONFIG_405EX=y
++# CONFIG_IPIC is not set
++# CONFIG_MPIC is not set
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++# CONFIG_FSL_ULI1575 is not set
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++# CONFIG_TICK_ONESHOT is not set
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_RCU_TRACE=y
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_MATH_EMULATION is not set
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_PROC_DEVICETREE=y
++# CONFIG_CMDLINE_BOOL is not set
++# CONFIG_PM is not set
++CONFIG_SECCOMP=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++# CONFIG_PCIEPORTBUS is not set
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++CONFIG_PCI_LEGACY=y
++# CONFIG_PCI_DEBUG is not set
++# CONFIG_PCCARD is not set
++# CONFIG_HOTPLUG_PCI is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_CONSISTENT_START=0xff100000
++CONFIG_CONSISTENT_SIZE=0x00200000
++CONFIG_BOOT_LOAD=0x00400000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++CONFIG_CONNECTOR=y
++CONFIG_PROC_EVENTS=y
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_OF_PARTS=y
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=m
++CONFIG_MTD_BLOCK=m
++# CONFIG_MTD_BLOCK_RO is not set
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++CONFIG_MTD_JEDECPROBE=y
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PHYSMAP is not set
++CONFIG_MTD_PHYSMAP_OF=y
++# CONFIG_MTD_INTEL_VR_NOR is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_PMC551 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++# CONFIG_BLK_DEV_LOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=35000
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_XILINX_SYSACE is not set
++# CONFIG_MISC_DEVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++# CONFIG_PHYLIB is not set
++CONFIG_NET_ETHERNET=y
++# CONFIG_MII is not set
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++CONFIG_IBM_NEW_EMAC=y
++CONFIG_IBM_NEW_EMAC_RXB=256
++CONFIG_IBM_NEW_EMAC_TXB=256
++CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
++CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
++CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
++# CONFIG_IBM_NEW_EMAC_DEBUG is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++CONFIG_IBM_NEW_EMAC_RGMII=y
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++CONFIG_IBM_NEW_EMAC_EMAC4=y
++# CONFIG_NET_PCI is not set
++# CONFIG_B44 is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++# CONFIG_INPUT is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_PCI=y
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++CONFIG_SERIAL_8250_EXTENDED=y
++# CONFIG_SERIAL_8250_MANY_PORTS is not set
++CONFIG_SERIAL_8250_SHARE_IRQ=y
++# CONFIG_SERIAL_8250_DETECT_IRQ is not set
++# CONFIG_SERIAL_8250_RSA is not set
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_JSM is not set
++CONFIG_SERIAL_OF_PLATFORM=y
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_NVRAM is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++# CONFIG_I2C is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++CONFIG_THERMAL=y
++# CONFIG_WATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++# CONFIG_USB_SUPPORT is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++# CONFIG_RTC_CLASS is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4DEV_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_JFFS2_FS is not set
++CONFIG_CRAMFS=y
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_DEBUG_STACKOVERFLOW is not set
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++# CONFIG_DEBUGGER is not set
++# CONFIG_VIRQ_DEBUG is not set
++# CONFIG_BDI_SWITCH is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++# CONFIG_CRYPTO_SEQIV is not set
++CONFIG_CRYPTO_MANAGER=y
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++CONFIG_CRYPTO_ECB=y
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=y
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_CRYPTO_DEV_HIFN_795X is not set
++# CONFIG_PPC_CLOCK is not set
+--- /dev/null
++++ b/arch/powerpc/configs/40x/makalu_defconfig
+@@ -0,0 +1,839 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc2
++# Fri Feb 15 21:52:30 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++# CONFIG_6xx is not set
++# CONFIG_PPC_85xx is not set
++# CONFIG_PPC_8xx is not set
++CONFIG_40x=y
++# CONFIG_44x is not set
++# CONFIG_E200 is not set
++CONFIG_4xx=y
++# CONFIG_PPC_MM_SLICES is not set
++CONFIG_NOT_COHERENT_CACHE=y
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++# CONFIG_DEFAULT_UIMAGE is not set
++CONFIG_PPC_DCR_NATIVE=y
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_PPC_DCR=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++# CONFIG_FAIR_GROUP_SCHED is not set
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++CONFIG_KALLSYMS_ALL=y
++CONFIG_KALLSYMS_EXTRA_PASS=y
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++CONFIG_BLOCK=y
++CONFIG_LBD=y
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++# CONFIG_PREEMPT_RCU is not set
++CONFIG_PPC4xx_PCI_EXPRESS=y
++
++#
++# Platform support
++#
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++# CONFIG_EP405 is not set
++# CONFIG_KILAUEA is not set
++CONFIG_MAKALU=y
++# CONFIG_WALNUT is not set
++# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
++CONFIG_405EX=y
++# CONFIG_IPIC is not set
++# CONFIG_MPIC is not set
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++# CONFIG_FSL_ULI1575 is not set
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++# CONFIG_TICK_ONESHOT is not set
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_RCU_TRACE=y
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_MATH_EMULATION is not set
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_PROC_DEVICETREE=y
++# CONFIG_CMDLINE_BOOL is not set
++# CONFIG_PM is not set
++CONFIG_SECCOMP=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++# CONFIG_PCIEPORTBUS is not set
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++CONFIG_PCI_LEGACY=y
++# CONFIG_PCI_DEBUG is not set
++# CONFIG_PCCARD is not set
++# CONFIG_HOTPLUG_PCI is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_CONSISTENT_START=0xff100000
++CONFIG_CONSISTENT_SIZE=0x00200000
++CONFIG_BOOT_LOAD=0x00400000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++CONFIG_CONNECTOR=y
++CONFIG_PROC_EVENTS=y
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_OF_PARTS=y
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=m
++CONFIG_MTD_BLOCK=m
++# CONFIG_MTD_BLOCK_RO is not set
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++CONFIG_MTD_JEDECPROBE=y
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PHYSMAP is not set
++CONFIG_MTD_PHYSMAP_OF=y
++# CONFIG_MTD_INTEL_VR_NOR is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_PMC551 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++# CONFIG_BLK_DEV_LOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=35000
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_XILINX_SYSACE is not set
++# CONFIG_MISC_DEVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++# CONFIG_PHYLIB is not set
++CONFIG_NET_ETHERNET=y
++# CONFIG_MII is not set
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++CONFIG_IBM_NEW_EMAC=y
++CONFIG_IBM_NEW_EMAC_RXB=256
++CONFIG_IBM_NEW_EMAC_TXB=256
++CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
++CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
++CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
++# CONFIG_IBM_NEW_EMAC_DEBUG is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++CONFIG_IBM_NEW_EMAC_RGMII=y
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++CONFIG_IBM_NEW_EMAC_EMAC4=y
++# CONFIG_NET_PCI is not set
++# CONFIG_B44 is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++# CONFIG_INPUT is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_PCI=y
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++CONFIG_SERIAL_8250_EXTENDED=y
++# CONFIG_SERIAL_8250_MANY_PORTS is not set
++CONFIG_SERIAL_8250_SHARE_IRQ=y
++# CONFIG_SERIAL_8250_DETECT_IRQ is not set
++# CONFIG_SERIAL_8250_RSA is not set
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_JSM is not set
++CONFIG_SERIAL_OF_PLATFORM=y
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_NVRAM is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++# CONFIG_I2C is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++CONFIG_THERMAL=y
++# CONFIG_WATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++# CONFIG_USB_SUPPORT is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++# CONFIG_RTC_CLASS is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4DEV_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_JFFS2_FS is not set
++CONFIG_CRAMFS=y
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_DEBUG_STACKOVERFLOW is not set
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++# CONFIG_DEBUGGER is not set
++# CONFIG_VIRQ_DEBUG is not set
++# CONFIG_BDI_SWITCH is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++# CONFIG_CRYPTO_SEQIV is not set
++CONFIG_CRYPTO_MANAGER=y
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++CONFIG_CRYPTO_ECB=y
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=y
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_CRYPTO_DEV_HIFN_795X is not set
++# CONFIG_PPC_CLOCK is not set
+--- /dev/null
++++ b/arch/powerpc/configs/40x/walnut_defconfig
+@@ -0,0 +1,887 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc2
++# Fri Feb 15 21:54:12 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++# CONFIG_6xx is not set
++# CONFIG_PPC_85xx is not set
++# CONFIG_PPC_8xx is not set
++CONFIG_40x=y
++# CONFIG_44x is not set
++# CONFIG_E200 is not set
++CONFIG_4xx=y
++# CONFIG_PPC_MM_SLICES is not set
++CONFIG_NOT_COHERENT_CACHE=y
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++# CONFIG_DEFAULT_UIMAGE is not set
++CONFIG_PPC_DCR_NATIVE=y
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_PPC_DCR=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++CONFIG_FAIR_GROUP_SCHED=y
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++CONFIG_KALLSYMS_ALL=y
++CONFIG_KALLSYMS_EXTRA_PASS=y
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++CONFIG_BLOCK=y
++CONFIG_LBD=y
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++# CONFIG_PREEMPT_RCU is not set
++# CONFIG_PPC4xx_PCI_EXPRESS is not set
++
++#
++# Platform support
++#
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++# CONFIG_EP405 is not set
++# CONFIG_KILAUEA is not set
++# CONFIG_MAKALU is not set
++CONFIG_WALNUT=y
++# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
++CONFIG_405GP=y
++CONFIG_IBM405_ERR77=y
++CONFIG_IBM405_ERR51=y
++# CONFIG_IPIC is not set
++# CONFIG_MPIC is not set
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++# CONFIG_FSL_ULI1575 is not set
++CONFIG_OF_RTC=y
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++# CONFIG_TICK_ONESHOT is not set
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_RCU_TRACE=y
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_MATH_EMULATION is not set
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++CONFIG_RESOURCES_64BIT=y
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_PROC_DEVICETREE=y
++# CONFIG_CMDLINE_BOOL is not set
++# CONFIG_PM is not set
++CONFIG_SECCOMP=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++# CONFIG_PCIEPORTBUS is not set
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++# CONFIG_PCI_LEGACY is not set
++# CONFIG_PCI_DEBUG is not set
++# CONFIG_PCCARD is not set
++# CONFIG_HOTPLUG_PCI is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_CONSISTENT_START=0xff100000
++CONFIG_CONSISTENT_SIZE=0x00200000
++CONFIG_BOOT_LOAD=0x00400000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++CONFIG_CONNECTOR=y
++CONFIG_PROC_EVENTS=y
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_OF_PARTS=y
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=m
++CONFIG_MTD_BLOCK=m
++# CONFIG_MTD_BLOCK_RO is not set
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++CONFIG_MTD_JEDECPROBE=y
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PHYSMAP is not set
++CONFIG_MTD_PHYSMAP_OF=y
++# CONFIG_MTD_INTEL_VR_NOR is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_PMC551 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++# CONFIG_BLK_DEV_LOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=35000
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_XILINX_SYSACE is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_SGI_IOC4 is not set
++# CONFIG_TIFM_CORE is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++# CONFIG_PHYLIB is not set
++CONFIG_NET_ETHERNET=y
++# CONFIG_MII is not set
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++CONFIG_IBM_NEW_EMAC=y
++CONFIG_IBM_NEW_EMAC_RXB=128
++CONFIG_IBM_NEW_EMAC_TXB=64
++CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
++CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
++CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
++# CONFIG_IBM_NEW_EMAC_DEBUG is not set
++CONFIG_IBM_NEW_EMAC_ZMII=y
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_NET_PCI is not set
++# CONFIG_B44 is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++# CONFIG_E1000 is not set
++# CONFIG_E1000E is not set
++# CONFIG_E1000E_ENABLED is not set
++# CONFIG_IP1000 is not set
++# CONFIG_IGB is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++# CONFIG_R8169 is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_VIA_VELOCITY is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++# CONFIG_QLA3XXX is not set
++# CONFIG_ATL1 is not set
++CONFIG_NETDEV_10000=y
++# CONFIG_CHELSIO_T1 is not set
++# CONFIG_CHELSIO_T3 is not set
++# CONFIG_IXGBE is not set
++# CONFIG_IXGB is not set
++# CONFIG_S2IO is not set
++# CONFIG_MYRI10GE is not set
++# CONFIG_NETXEN_NIC is not set
++# CONFIG_NIU is not set
++# CONFIG_MLX4_CORE is not set
++# CONFIG_TEHUTI is not set
++# CONFIG_BNX2X is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++# CONFIG_INPUT is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_PCI=y
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++CONFIG_SERIAL_8250_EXTENDED=y
++# CONFIG_SERIAL_8250_MANY_PORTS is not set
++CONFIG_SERIAL_8250_SHARE_IRQ=y
++# CONFIG_SERIAL_8250_DETECT_IRQ is not set
++# CONFIG_SERIAL_8250_RSA is not set
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_JSM is not set
++CONFIG_SERIAL_OF_PLATFORM=y
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_NVRAM is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++# CONFIG_I2C is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++CONFIG_THERMAL=y
++# CONFIG_WATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=m
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++# CONFIG_USB is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++# CONFIG_RTC_CLASS is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4DEV_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_JFFS2_FS is not set
++CONFIG_CRAMFS=y
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_DEBUG_STACKOVERFLOW is not set
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++# CONFIG_DEBUGGER is not set
++# CONFIG_VIRQ_DEBUG is not set
++# CONFIG_BDI_SWITCH is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++# CONFIG_CRYPTO_SEQIV is not set
++CONFIG_CRYPTO_MANAGER=y
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++CONFIG_CRYPTO_ECB=y
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=y
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_CRYPTO_DEV_HIFN_795X is not set
++# CONFIG_PPC_CLOCK is not set
+--- /dev/null
++++ b/arch/powerpc/configs/44x/bamboo_defconfig
+@@ -0,0 +1,815 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc2
++# Fri Feb 15 21:36:39 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++# CONFIG_6xx is not set
++# CONFIG_PPC_85xx is not set
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++CONFIG_44x=y
++# CONFIG_E200 is not set
++CONFIG_PPC_FPU=y
++CONFIG_4xx=y
++CONFIG_BOOKE=y
++CONFIG_PTE_64BIT=y
++CONFIG_PHYS_64BIT=y
++# CONFIG_PPC_MM_SLICES is not set
++CONFIG_NOT_COHERENT_CACHE=y
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++# CONFIG_DEFAULT_UIMAGE is not set
++CONFIG_PPC_DCR_NATIVE=y
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_PPC_DCR=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++CONFIG_FAIR_GROUP_SCHED=y
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++CONFIG_BLOCK=y
++CONFIG_LBD=y
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++# CONFIG_PREEMPT_RCU is not set
++# CONFIG_PPC4xx_PCI_EXPRESS is not set
++
++#
++# Platform support
++#
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++CONFIG_BAMBOO=y
++# CONFIG_EBONY is not set
++# CONFIG_SEQUOIA is not set
++# CONFIG_TAISHAN is not set
++# CONFIG_KATMAI is not set
++# CONFIG_RAINIER is not set
++# CONFIG_WARP is not set
++CONFIG_440EP=y
++CONFIG_IBM440EP_ERR42=y
++# CONFIG_IPIC is not set
++# CONFIG_MPIC is not set
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++# CONFIG_FSL_ULI1575 is not set
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++# CONFIG_TICK_ONESHOT is not set
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_RCU_TRACE=y
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_MATH_EMULATION is not set
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++CONFIG_RESOURCES_64BIT=y
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_PROC_DEVICETREE=y
++CONFIG_CMDLINE_BOOL=y
++CONFIG_CMDLINE=""
++CONFIG_SECCOMP=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++# CONFIG_PCIEPORTBUS is not set
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++CONFIG_PCI_LEGACY=y
++# CONFIG_PCI_DEBUG is not set
++# CONFIG_PCCARD is not set
++# CONFIG_HOTPLUG_PCI is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_CONSISTENT_START=0xff100000
++CONFIG_CONSISTENT_SIZE=0x00200000
++CONFIG_BOOT_LOAD=0x01000000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++CONFIG_CONNECTOR=y
++CONFIG_PROC_EVENTS=y
++# CONFIG_MTD is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++# CONFIG_BLK_DEV_LOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=35000
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_XILINX_SYSACE is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_SGI_IOC4 is not set
++# CONFIG_TIFM_CORE is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++# CONFIG_PHYLIB is not set
++CONFIG_NET_ETHERNET=y
++# CONFIG_MII is not set
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++CONFIG_IBM_NEW_EMAC=y
++CONFIG_IBM_NEW_EMAC_RXB=128
++CONFIG_IBM_NEW_EMAC_TXB=64
++CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
++CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
++CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
++# CONFIG_IBM_NEW_EMAC_DEBUG is not set
++CONFIG_IBM_NEW_EMAC_ZMII=y
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_NET_PCI is not set
++# CONFIG_B44 is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++# CONFIG_E1000 is not set
++# CONFIG_E1000E is not set
++# CONFIG_E1000E_ENABLED is not set
++# CONFIG_IP1000 is not set
++# CONFIG_IGB is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++# CONFIG_R8169 is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_VIA_VELOCITY is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++# CONFIG_QLA3XXX is not set
++# CONFIG_ATL1 is not set
++CONFIG_NETDEV_10000=y
++# CONFIG_CHELSIO_T1 is not set
++# CONFIG_CHELSIO_T3 is not set
++# CONFIG_IXGBE is not set
++# CONFIG_IXGB is not set
++# CONFIG_S2IO is not set
++# CONFIG_MYRI10GE is not set
++# CONFIG_NETXEN_NIC is not set
++# CONFIG_NIU is not set
++# CONFIG_MLX4_CORE is not set
++# CONFIG_TEHUTI is not set
++# CONFIG_BNX2X is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++# CONFIG_INPUT is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++# CONFIG_SERIAL_8250_PCI is not set
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++CONFIG_SERIAL_8250_EXTENDED=y
++# CONFIG_SERIAL_8250_MANY_PORTS is not set
++CONFIG_SERIAL_8250_SHARE_IRQ=y
++# CONFIG_SERIAL_8250_DETECT_IRQ is not set
++# CONFIG_SERIAL_8250_RSA is not set
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_JSM is not set
++CONFIG_SERIAL_OF_PLATFORM=y
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_NVRAM is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++# CONFIG_I2C is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++CONFIG_THERMAL=y
++# CONFIG_WATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++
++#
++# Graphics support
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=m
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++# CONFIG_USB is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++# CONFIG_RTC_CLASS is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4DEV_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_CRAMFS=y
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_DEBUG_STACKOVERFLOW is not set
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++CONFIG_DEBUGGER=y
++# CONFIG_KGDB is not set
++# CONFIG_XMON is not set
++# CONFIG_VIRQ_DEBUG is not set
++# CONFIG_BDI_SWITCH is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++# CONFIG_CRYPTO_SEQIV is not set
++CONFIG_CRYPTO_MANAGER=y
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++CONFIG_CRYPTO_ECB=y
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=y
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_CRYPTO_DEV_HIFN_795X is not set
++# CONFIG_PPC_CLOCK is not set
+--- /dev/null
++++ b/arch/powerpc/configs/44x/canyonlands_defconfig
+@@ -0,0 +1,721 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc1
++# Thu Feb 21 14:29:28 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++# CONFIG_6xx is not set
++# CONFIG_PPC_85xx is not set
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++CONFIG_44x=y
++# CONFIG_E200 is not set
++CONFIG_PPC_FPU=y
++CONFIG_4xx=y
++CONFIG_BOOKE=y
++CONFIG_PTE_64BIT=y
++CONFIG_PHYS_64BIT=y
++# CONFIG_PPC_MM_SLICES is not set
++CONFIG_NOT_COHERENT_CACHE=y
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++# CONFIG_DEFAULT_UIMAGE is not set
++CONFIG_PPC_DCR_NATIVE=y
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_PPC_DCR=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++# CONFIG_FAIR_GROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++# CONFIG_LOGBUFFER is not set
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++CONFIG_BLOCK=y
++CONFIG_LBD=y
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++# CONFIG_PREEMPT_RCU is not set
++CONFIG_PPC4xx_PCI_EXPRESS=y
++
++#
++# Platform support
++#
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++# CONFIG_BAMBOO is not set
++# CONFIG_EBONY is not set
++# CONFIG_SEQUOIA is not set
++# CONFIG_TAISHAN is not set
++# CONFIG_KATMAI is not set
++# CONFIG_RAINIER is not set
++# CONFIG_WARP is not set
++CONFIG_CANYONLANDS=y
++CONFIG_460EX=y
++# CONFIG_IPIC is not set
++# CONFIG_MPIC is not set
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++# CONFIG_FSL_ULI1575 is not set
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_RCU_TRACE=y
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_MATH_EMULATION is not set
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++CONFIG_RESOURCES_64BIT=y
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_PROC_DEVICETREE=y
++CONFIG_CMDLINE_BOOL=y
++CONFIG_CMDLINE=""
++CONFIG_SECCOMP=y
++CONFIG_WANT_DEVICE_TREE=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++# CONFIG_PCIEPORTBUS is not set
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++CONFIG_PCI_LEGACY=y
++# CONFIG_PCI_DEBUG is not set
++# CONFIG_PCCARD is not set
++# CONFIG_HOTPLUG_PCI is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_CONSISTENT_START=0xff100000
++CONFIG_CONSISTENT_SIZE=0x00200000
++CONFIG_BOOT_LOAD=0x01000000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++CONFIG_CONNECTOR=y
++CONFIG_PROC_EVENTS=y
++# CONFIG_MTD is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++# CONFIG_BLK_DEV_LOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=35000
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_XILINX_SYSACE is not set
++# CONFIG_MISC_DEVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++# CONFIG_PHYLIB is not set
++CONFIG_NET_ETHERNET=y
++# CONFIG_MII is not set
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++CONFIG_IBM_NEW_EMAC=y
++CONFIG_IBM_NEW_EMAC_RXB=256
++CONFIG_IBM_NEW_EMAC_TXB=256
++CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
++CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
++CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
++# CONFIG_IBM_NEW_EMAC_DEBUG is not set
++CONFIG_IBM_NEW_EMAC_ZMII=y
++CONFIG_IBM_NEW_EMAC_RGMII=y
++CONFIG_IBM_NEW_EMAC_TAH=y
++CONFIG_IBM_NEW_EMAC_EMAC4=y
++# CONFIG_NET_PCI is not set
++# CONFIG_B44 is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++# CONFIG_INPUT is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++# CONFIG_SERIAL_8250_PCI is not set
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++CONFIG_SERIAL_8250_EXTENDED=y
++# CONFIG_SERIAL_8250_MANY_PORTS is not set
++CONFIG_SERIAL_8250_SHARE_IRQ=y
++# CONFIG_SERIAL_8250_DETECT_IRQ is not set
++# CONFIG_SERIAL_8250_RSA is not set
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_JSM is not set
++CONFIG_SERIAL_OF_PLATFORM=y
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_NVRAM is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++# CONFIG_I2C is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
++# CONFIG_WATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++
++#
++# Graphics support
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=m
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++# CONFIG_USB_SUPPORT is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++# CONFIG_RTC_CLASS is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4DEV_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_CRAMFS=y
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_DEBUG_STACKOVERFLOW is not set
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++CONFIG_DEBUGGER=y
++# CONFIG_KGDB is not set
++# CONFIG_XMON is not set
++# CONFIG_VIRQ_DEBUG is not set
++# CONFIG_BDI_SWITCH is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++# CONFIG_CRYPTO is not set
++# CONFIG_PPC_CLOCK is not set
+--- /dev/null
++++ b/arch/powerpc/configs/44x/ebony_defconfig
+@@ -0,0 +1,898 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc2
++# Fri Feb 15 21:50:44 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++# CONFIG_6xx is not set
++# CONFIG_PPC_85xx is not set
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++CONFIG_44x=y
++# CONFIG_E200 is not set
++CONFIG_4xx=y
++CONFIG_BOOKE=y
++CONFIG_PTE_64BIT=y
++CONFIG_PHYS_64BIT=y
++# CONFIG_PPC_MM_SLICES is not set
++CONFIG_NOT_COHERENT_CACHE=y
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++# CONFIG_DEFAULT_UIMAGE is not set
++CONFIG_PPC_DCR_NATIVE=y
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_PPC_DCR=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++CONFIG_FAIR_GROUP_SCHED=y
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++CONFIG_KALLSYMS_ALL=y
++CONFIG_KALLSYMS_EXTRA_PASS=y
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++CONFIG_BLOCK=y
++CONFIG_LBD=y
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++# CONFIG_PREEMPT_RCU is not set
++# CONFIG_PPC4xx_PCI_EXPRESS is not set
++
++#
++# Platform support
++#
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++# CONFIG_BAMBOO is not set
++CONFIG_EBONY=y
++# CONFIG_SEQUOIA is not set
++# CONFIG_TAISHAN is not set
++# CONFIG_KATMAI is not set
++# CONFIG_RAINIER is not set
++# CONFIG_WARP is not set
++CONFIG_440GP=y
++# CONFIG_IPIC is not set
++# CONFIG_MPIC is not set
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++# CONFIG_FSL_ULI1575 is not set
++CONFIG_OF_RTC=y
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++# CONFIG_TICK_ONESHOT is not set
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_RCU_TRACE=y
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++CONFIG_MATH_EMULATION=y
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++CONFIG_RESOURCES_64BIT=y
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_PROC_DEVICETREE=y
++# CONFIG_CMDLINE_BOOL is not set
++CONFIG_SECCOMP=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++# CONFIG_PCIEPORTBUS is not set
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++CONFIG_PCI_LEGACY=y
++# CONFIG_PCI_DEBUG is not set
++# CONFIG_PCCARD is not set
++# CONFIG_HOTPLUG_PCI is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_CONSISTENT_START=0xff100000
++CONFIG_CONSISTENT_SIZE=0x00200000
++CONFIG_BOOT_LOAD=0x01000000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++CONFIG_CONNECTOR=y
++CONFIG_PROC_EVENTS=y
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++# CONFIG_MTD_CMDLINE_PARTS is not set
++CONFIG_MTD_OF_PARTS=y
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++CONFIG_MTD_JEDECPROBE=y
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PHYSMAP is not set
++CONFIG_MTD_PHYSMAP_OF=y
++# CONFIG_MTD_INTEL_VR_NOR is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_PMC551 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++# CONFIG_BLK_DEV_LOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=35000
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_XILINX_SYSACE is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_SGI_IOC4 is not set
++# CONFIG_TIFM_CORE is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++# CONFIG_PHYLIB is not set
++CONFIG_NET_ETHERNET=y
++# CONFIG_MII is not set
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++CONFIG_IBM_NEW_EMAC=y
++CONFIG_IBM_NEW_EMAC_RXB=128
++CONFIG_IBM_NEW_EMAC_TXB=64
++CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
++CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
++CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
++# CONFIG_IBM_NEW_EMAC_DEBUG is not set
++CONFIG_IBM_NEW_EMAC_ZMII=y
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_NET_PCI is not set
++# CONFIG_B44 is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++# CONFIG_E1000 is not set
++# CONFIG_E1000E is not set
++# CONFIG_E1000E_ENABLED is not set
++# CONFIG_IP1000 is not set
++# CONFIG_IGB is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++# CONFIG_R8169 is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_VIA_VELOCITY is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++# CONFIG_QLA3XXX is not set
++# CONFIG_ATL1 is not set
++CONFIG_NETDEV_10000=y
++# CONFIG_CHELSIO_T1 is not set
++# CONFIG_CHELSIO_T3 is not set
++# CONFIG_IXGBE is not set
++# CONFIG_IXGB is not set
++# CONFIG_S2IO is not set
++# CONFIG_MYRI10GE is not set
++# CONFIG_NETXEN_NIC is not set
++# CONFIG_NIU is not set
++# CONFIG_MLX4_CORE is not set
++# CONFIG_TEHUTI is not set
++# CONFIG_BNX2X is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++# CONFIG_INPUT is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++# CONFIG_SERIAL_8250_PCI is not set
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++CONFIG_SERIAL_8250_EXTENDED=y
++# CONFIG_SERIAL_8250_MANY_PORTS is not set
++CONFIG_SERIAL_8250_SHARE_IRQ=y
++# CONFIG_SERIAL_8250_DETECT_IRQ is not set
++# CONFIG_SERIAL_8250_RSA is not set
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_JSM is not set
++CONFIG_SERIAL_OF_PLATFORM=y
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_NVRAM is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++# CONFIG_I2C is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++CONFIG_THERMAL=y
++# CONFIG_WATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++# CONFIG_USB is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++# CONFIG_RTC_CLASS is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4DEV_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++CONFIG_CRAMFS=y
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_DEBUG_STACKOVERFLOW is not set
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++# CONFIG_DEBUGGER is not set
++# CONFIG_VIRQ_DEBUG is not set
++# CONFIG_BDI_SWITCH is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++# CONFIG_CRYPTO_SEQIV is not set
++CONFIG_CRYPTO_MANAGER=y
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++CONFIG_CRYPTO_ECB=y
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=y
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++# CONFIG_CRYPTO_HW is not set
++# CONFIG_PPC_CLOCK is not set
+--- /dev/null
++++ b/arch/powerpc/configs/44x/katmai_defconfig
+@@ -0,0 +1,790 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.24-rc6
++# Mon Dec 24 11:17:43 2007
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++# CONFIG_6xx is not set
++# CONFIG_PPC_85xx is not set
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++CONFIG_44x=y
++# CONFIG_E200 is not set
++CONFIG_4xx=y
++CONFIG_BOOKE=y
++CONFIG_PTE_64BIT=y
++CONFIG_PHYS_64BIT=y
++# CONFIG_PPC_MM_SLICES is not set
++CONFIG_NOT_COHERENT_CACHE=y
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++# CONFIG_DEFAULT_UIMAGE is not set
++CONFIG_PPC_DCR_NATIVE=y
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_PPC_DCR=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_FAIR_GROUP_SCHED=y
++CONFIG_FAIR_USER_SCHED=y
++# CONFIG_FAIR_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++CONFIG_BLOCK=y
++CONFIG_LBD=y
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_PPC4xx_PCI_EXPRESS=y
++
++#
++# Platform support
++#
++# CONFIG_PPC_MPC52xx is not set
++# CONFIG_PPC_MPC5200 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++# CONFIG_BAMBOO is not set
++# CONFIG_EBONY is not set
++# CONFIG_SEQUOIA is not set
++# CONFIG_TAISHAN is not set
++CONFIG_KATMAI=y
++# CONFIG_RAINIER is not set
++CONFIG_440SPe=y
++# CONFIG_MPIC is not set
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++# CONFIG_CPM2 is not set
++# CONFIG_FSL_ULI1575 is not set
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++# CONFIG_TICK_ONESHOT is not set
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_MATH_EMULATION is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++CONFIG_RESOURCES_64BIT=y
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_PROC_DEVICETREE=y
++CONFIG_CMDLINE_BOOL=y
++CONFIG_CMDLINE=""
++CONFIG_SECCOMP=y
++CONFIG_WANT_DEVICE_TREE=y
++CONFIG_DEVICE_TREE="katmai.dts"
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++# CONFIG_PCIEPORTBUS is not set
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++CONFIG_PCI_LEGACY=y
++# CONFIG_PCI_DEBUG is not set
++# CONFIG_PCCARD is not set
++# CONFIG_HOTPLUG_PCI is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_CONSISTENT_START=0xff100000
++CONFIG_CONSISTENT_SIZE=0x00200000
++CONFIG_BOOT_LOAD=0x01000000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++CONFIG_CONNECTOR=y
++CONFIG_PROC_EVENTS=y
++# CONFIG_MTD is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++# CONFIG_BLK_DEV_LOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=35000
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_XILINX_SYSACE is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_SGI_IOC4 is not set
++# CONFIG_TIFM_CORE is not set
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++CONFIG_MACINTOSH_DRIVERS=y
++# CONFIG_MAC_EMUMOUSEBTN is not set
++# CONFIG_WINDFARM is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_IP1000 is not set
++# CONFIG_ARCNET is not set
++# CONFIG_PHYLIB is not set
++CONFIG_NET_ETHERNET=y
++# CONFIG_MII is not set
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++CONFIG_IBM_NEW_EMAC=y
++CONFIG_IBM_NEW_EMAC_RXB=128
++CONFIG_IBM_NEW_EMAC_TXB=64
++CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
++CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
++CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
++# CONFIG_IBM_NEW_EMAC_DEBUG is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++CONFIG_IBM_NEW_EMAC_EMAC4=y
++# CONFIG_NET_PCI is not set
++# CONFIG_B44 is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++# CONFIG_E1000 is not set
++# CONFIG_E1000E is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++# CONFIG_R8169 is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_VIA_VELOCITY is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++# CONFIG_QLA3XXX is not set
++# CONFIG_ATL1 is not set
++CONFIG_NETDEV_10000=y
++# CONFIG_CHELSIO_T1 is not set
++# CONFIG_CHELSIO_T3 is not set
++# CONFIG_IXGBE is not set
++# CONFIG_IXGB is not set
++# CONFIG_S2IO is not set
++# CONFIG_MYRI10GE is not set
++# CONFIG_NETXEN_NIC is not set
++# CONFIG_NIU is not set
++# CONFIG_MLX4_CORE is not set
++# CONFIG_TEHUTI is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_SHAPER is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++# CONFIG_INPUT is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++# CONFIG_SERIAL_8250_PCI is not set
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++CONFIG_SERIAL_8250_EXTENDED=y
++# CONFIG_SERIAL_8250_MANY_PORTS is not set
++CONFIG_SERIAL_8250_SHARE_IRQ=y
++# CONFIG_SERIAL_8250_DETECT_IRQ is not set
++# CONFIG_SERIAL_8250_RSA is not set
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_JSM is not set
++CONFIG_SERIAL_OF_PLATFORM=y
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_NVRAM is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++# CONFIG_I2C is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++# CONFIG_WATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++
++#
++# Graphics support
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=m
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++# CONFIG_USB is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# USB Gadget Support
++#
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++# CONFIG_RTC_CLASS is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4DEV_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_ROMFS_FS is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++CONFIG_DNOTIFY=y
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_CRAMFS=y
++# CONFIG_VXFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++# CONFIG_UCC_SLOW is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++CONFIG_INSTRUMENTATION=y
++# CONFIG_PROFILING is not set
++# CONFIG_KPROBES is not set
++# CONFIG_MARKERS is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++CONFIG_FORCED_INLINING=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_DEBUG_STACKOVERFLOW is not set
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++CONFIG_DEBUGGER=y
++# CONFIG_KGDB is not set
++# CONFIG_XMON is not set
++# CONFIG_BDI_SWITCH is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++CONFIG_CRYPTO_MANAGER=y
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++CONFIG_CRYPTO_ECB=y
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=y
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_PPC_CLOCK is not set
+--- /dev/null
++++ b/arch/powerpc/configs/44x/rainier_defconfig
+@@ -0,0 +1,899 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc2
++# Fri Feb 15 21:53:10 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++# CONFIG_6xx is not set
++# CONFIG_PPC_85xx is not set
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++CONFIG_44x=y
++# CONFIG_E200 is not set
++CONFIG_4xx=y
++CONFIG_BOOKE=y
++CONFIG_PTE_64BIT=y
++CONFIG_PHYS_64BIT=y
++# CONFIG_PPC_MM_SLICES is not set
++CONFIG_NOT_COHERENT_CACHE=y
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++# CONFIG_DEFAULT_UIMAGE is not set
++CONFIG_PPC_DCR_NATIVE=y
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_PPC_DCR=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++CONFIG_FAIR_GROUP_SCHED=y
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++CONFIG_BLOCK=y
++CONFIG_LBD=y
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++# CONFIG_PREEMPT_RCU is not set
++# CONFIG_PPC4xx_PCI_EXPRESS is not set
++
++#
++# Platform support
++#
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++# CONFIG_BAMBOO is not set
++# CONFIG_EBONY is not set
++# CONFIG_SEQUOIA is not set
++# CONFIG_TAISHAN is not set
++# CONFIG_KATMAI is not set
++CONFIG_RAINIER=y
++# CONFIG_WARP is not set
++CONFIG_440GRX=y
++# CONFIG_IPIC is not set
++# CONFIG_MPIC is not set
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++# CONFIG_FSL_ULI1575 is not set
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++# CONFIG_TICK_ONESHOT is not set
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_RCU_TRACE=y
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++CONFIG_MATH_EMULATION=y
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++CONFIG_RESOURCES_64BIT=y
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_PROC_DEVICETREE=y
++CONFIG_CMDLINE_BOOL=y
++CONFIG_CMDLINE=""
++CONFIG_SECCOMP=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++# CONFIG_PCIEPORTBUS is not set
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++CONFIG_PCI_LEGACY=y
++# CONFIG_PCI_DEBUG is not set
++# CONFIG_PCCARD is not set
++# CONFIG_HOTPLUG_PCI is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_CONSISTENT_START=0xff100000
++CONFIG_CONSISTENT_SIZE=0x00200000
++CONFIG_BOOT_LOAD=0x01000000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++CONFIG_CONNECTOR=y
++CONFIG_PROC_EVENTS=y
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_OF_PARTS=y
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++# CONFIG_MTD_BLKDEVS is not set
++# CONFIG_MTD_BLOCK is not set
++# CONFIG_MTD_BLOCK_RO is not set
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++CONFIG_MTD_JEDECPROBE=y
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++CONFIG_MTD_CFI_INTELEXT=y
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PHYSMAP is not set
++CONFIG_MTD_PHYSMAP_OF=y
++# CONFIG_MTD_INTEL_VR_NOR is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_PMC551 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++# CONFIG_BLK_DEV_LOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=35000
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_XILINX_SYSACE is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_SGI_IOC4 is not set
++# CONFIG_TIFM_CORE is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++CONFIG_MACINTOSH_DRIVERS=y
++# CONFIG_MAC_EMUMOUSEBTN is not set
++# CONFIG_WINDFARM is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++# CONFIG_NET_ETHERNET is not set
++CONFIG_IBM_NEW_EMAC_ZMII=y
++CONFIG_IBM_NEW_EMAC_RGMII=y
++CONFIG_IBM_NEW_EMAC_EMAC4=y
++CONFIG_NETDEV_1000=y
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++# CONFIG_E1000 is not set
++# CONFIG_E1000E is not set
++# CONFIG_E1000E_ENABLED is not set
++# CONFIG_IP1000 is not set
++# CONFIG_IGB is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++# CONFIG_R8169 is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_VIA_VELOCITY is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++# CONFIG_QLA3XXX is not set
++# CONFIG_ATL1 is not set
++CONFIG_NETDEV_10000=y
++# CONFIG_CHELSIO_T1 is not set
++# CONFIG_CHELSIO_T3 is not set
++# CONFIG_IXGBE is not set
++# CONFIG_IXGB is not set
++# CONFIG_S2IO is not set
++# CONFIG_MYRI10GE is not set
++# CONFIG_NETXEN_NIC is not set
++# CONFIG_NIU is not set
++# CONFIG_MLX4_CORE is not set
++# CONFIG_TEHUTI is not set
++# CONFIG_BNX2X is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++# CONFIG_INPUT is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++# CONFIG_SERIAL_8250_PCI is not set
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++CONFIG_SERIAL_8250_EXTENDED=y
++# CONFIG_SERIAL_8250_MANY_PORTS is not set
++CONFIG_SERIAL_8250_SHARE_IRQ=y
++# CONFIG_SERIAL_8250_DETECT_IRQ is not set
++# CONFIG_SERIAL_8250_RSA is not set
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_JSM is not set
++CONFIG_SERIAL_OF_PLATFORM=y
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_NVRAM is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++# CONFIG_I2C is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++CONFIG_THERMAL=y
++# CONFIG_WATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++
++#
++# Graphics support
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=m
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++# CONFIG_USB is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++# CONFIG_RTC_CLASS is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4DEV_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++CONFIG_CRAMFS=y
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_DEBUG_STACKOVERFLOW is not set
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++CONFIG_DEBUGGER=y
++# CONFIG_KGDB is not set
++# CONFIG_XMON is not set
++# CONFIG_VIRQ_DEBUG is not set
++# CONFIG_BDI_SWITCH is not set
++CONFIG_PPC_EARLY_DEBUG=y
++# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
++# CONFIG_PPC_EARLY_DEBUG_G5 is not set
++# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
++# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
++# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
++# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
++# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
++# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
++CONFIG_PPC_EARLY_DEBUG_44x=y
++# CONFIG_PPC_EARLY_DEBUG_40x is not set
++# CONFIG_PPC_EARLY_DEBUG_CPM is not set
++CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0xef600300
++CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++# CONFIG_CRYPTO_SEQIV is not set
++CONFIG_CRYPTO_MANAGER=y
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++CONFIG_CRYPTO_ECB=y
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=y
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_CRYPTO_DEV_HIFN_795X is not set
++# CONFIG_PPC_CLOCK is not set
+--- /dev/null
++++ b/arch/powerpc/configs/44x/sequoia_defconfig
+@@ -0,0 +1,916 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc2
++# Fri Feb 15 21:53:46 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++# CONFIG_6xx is not set
++# CONFIG_PPC_85xx is not set
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++CONFIG_44x=y
++# CONFIG_E200 is not set
++CONFIG_PPC_FPU=y
++CONFIG_4xx=y
++CONFIG_BOOKE=y
++CONFIG_PTE_64BIT=y
++CONFIG_PHYS_64BIT=y
++# CONFIG_PPC_MM_SLICES is not set
++CONFIG_NOT_COHERENT_CACHE=y
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++# CONFIG_DEFAULT_UIMAGE is not set
++CONFIG_PPC_DCR_NATIVE=y
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_PPC_DCR=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++# CONFIG_FAIR_GROUP_SCHED is not set
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++CONFIG_BLOCK=y
++CONFIG_LBD=y
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++# CONFIG_PREEMPT_RCU is not set
++# CONFIG_PPC4xx_PCI_EXPRESS is not set
++
++#
++# Platform support
++#
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++# CONFIG_BAMBOO is not set
++# CONFIG_EBONY is not set
++CONFIG_SEQUOIA=y
++# CONFIG_TAISHAN is not set
++# CONFIG_KATMAI is not set
++# CONFIG_RAINIER is not set
++# CONFIG_WARP is not set
++CONFIG_440EPX=y
++# CONFIG_IPIC is not set
++# CONFIG_MPIC is not set
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++# CONFIG_FSL_ULI1575 is not set
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_RCU_TRACE=y
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_MATH_EMULATION is not set
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++CONFIG_RESOURCES_64BIT=y
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_PROC_DEVICETREE=y
++CONFIG_CMDLINE_BOOL=y
++CONFIG_CMDLINE=""
++CONFIG_SECCOMP=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++# CONFIG_PCIEPORTBUS is not set
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++CONFIG_PCI_LEGACY=y
++# CONFIG_PCI_DEBUG is not set
++# CONFIG_PCCARD is not set
++# CONFIG_HOTPLUG_PCI is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_CONSISTENT_START=0xff100000
++CONFIG_CONSISTENT_SIZE=0x00200000
++CONFIG_BOOT_LOAD=0x01000000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++CONFIG_CONNECTOR=y
++CONFIG_PROC_EVENTS=y
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_OF_PARTS=y
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++# CONFIG_MTD_BLKDEVS is not set
++# CONFIG_MTD_BLOCK is not set
++# CONFIG_MTD_BLOCK_RO is not set
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++CONFIG_MTD_JEDECPROBE=y
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++CONFIG_MTD_CFI_INTELEXT=y
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PHYSMAP is not set
++CONFIG_MTD_PHYSMAP_OF=y
++# CONFIG_MTD_INTEL_VR_NOR is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_PMC551 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++# CONFIG_BLK_DEV_LOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=35000
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_XILINX_SYSACE is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_SGI_IOC4 is not set
++# CONFIG_TIFM_CORE is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++# CONFIG_PHYLIB is not set
++CONFIG_NET_ETHERNET=y
++# CONFIG_MII is not set
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++CONFIG_IBM_NEW_EMAC=y
++CONFIG_IBM_NEW_EMAC_RXB=128
++CONFIG_IBM_NEW_EMAC_TXB=64
++CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
++CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
++CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
++# CONFIG_IBM_NEW_EMAC_DEBUG is not set
++CONFIG_IBM_NEW_EMAC_ZMII=y
++CONFIG_IBM_NEW_EMAC_RGMII=y
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++CONFIG_IBM_NEW_EMAC_EMAC4=y
++# CONFIG_NET_PCI is not set
++# CONFIG_B44 is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++# CONFIG_E1000 is not set
++# CONFIG_E1000E is not set
++# CONFIG_E1000E_ENABLED is not set
++# CONFIG_IP1000 is not set
++# CONFIG_IGB is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++# CONFIG_R8169 is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_VIA_VELOCITY is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++# CONFIG_QLA3XXX is not set
++# CONFIG_ATL1 is not set
++CONFIG_NETDEV_10000=y
++# CONFIG_CHELSIO_T1 is not set
++# CONFIG_CHELSIO_T3 is not set
++# CONFIG_IXGBE is not set
++# CONFIG_IXGB is not set
++# CONFIG_S2IO is not set
++# CONFIG_MYRI10GE is not set
++# CONFIG_NETXEN_NIC is not set
++# CONFIG_NIU is not set
++# CONFIG_MLX4_CORE is not set
++# CONFIG_TEHUTI is not set
++# CONFIG_BNX2X is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++# CONFIG_INPUT is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++# CONFIG_SERIAL_8250_PCI is not set
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++CONFIG_SERIAL_8250_EXTENDED=y
++# CONFIG_SERIAL_8250_MANY_PORTS is not set
++CONFIG_SERIAL_8250_SHARE_IRQ=y
++# CONFIG_SERIAL_8250_DETECT_IRQ is not set
++# CONFIG_SERIAL_8250_RSA is not set
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_JSM is not set
++CONFIG_SERIAL_OF_PLATFORM=y
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_NVRAM is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++# CONFIG_I2C is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++CONFIG_THERMAL=y
++# CONFIG_WATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++
++#
++# Graphics support
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=m
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++# CONFIG_USB is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++# CONFIG_RTC_CLASS is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4DEV_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++CONFIG_CRAMFS=y
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_DEBUG_STACKOVERFLOW is not set
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++CONFIG_DEBUGGER=y
++# CONFIG_KGDB is not set
++# CONFIG_XMON is not set
++# CONFIG_VIRQ_DEBUG is not set
++# CONFIG_BDI_SWITCH is not set
++CONFIG_PPC_EARLY_DEBUG=y
++# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
++# CONFIG_PPC_EARLY_DEBUG_G5 is not set
++# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
++# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
++# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
++# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
++# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
++# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
++CONFIG_PPC_EARLY_DEBUG_44x=y
++# CONFIG_PPC_EARLY_DEBUG_40x is not set
++# CONFIG_PPC_EARLY_DEBUG_CPM is not set
++CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0xef600300
++CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++# CONFIG_CRYPTO_SEQIV is not set
++CONFIG_CRYPTO_MANAGER=y
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++CONFIG_CRYPTO_ECB=y
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=y
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_CRYPTO_DEV_HIFN_795X is not set
++# CONFIG_PPC_CLOCK is not set
+--- /dev/null
++++ b/arch/powerpc/configs/44x/taishan_defconfig
+@@ -0,0 +1,815 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc2
++# Fri Feb 15 21:40:44 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++# CONFIG_6xx is not set
++# CONFIG_PPC_85xx is not set
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++CONFIG_44x=y
++# CONFIG_E200 is not set
++CONFIG_4xx=y
++CONFIG_BOOKE=y
++CONFIG_PTE_64BIT=y
++CONFIG_PHYS_64BIT=y
++# CONFIG_PPC_MM_SLICES is not set
++CONFIG_NOT_COHERENT_CACHE=y
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++# CONFIG_DEFAULT_UIMAGE is not set
++CONFIG_PPC_DCR_NATIVE=y
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_PPC_DCR=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++CONFIG_FAIR_GROUP_SCHED=y
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++CONFIG_BLOCK=y
++CONFIG_LBD=y
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++# CONFIG_PREEMPT_RCU is not set
++# CONFIG_PPC4xx_PCI_EXPRESS is not set
++
++#
++# Platform support
++#
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++# CONFIG_BAMBOO is not set
++# CONFIG_EBONY is not set
++# CONFIG_SEQUOIA is not set
++CONFIG_TAISHAN=y
++# CONFIG_KATMAI is not set
++# CONFIG_RAINIER is not set
++# CONFIG_WARP is not set
++CONFIG_440GX=y
++# CONFIG_IPIC is not set
++# CONFIG_MPIC is not set
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++# CONFIG_FSL_ULI1575 is not set
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++# CONFIG_TICK_ONESHOT is not set
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_RCU_TRACE=y
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_MATH_EMULATION is not set
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++CONFIG_RESOURCES_64BIT=y
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_PROC_DEVICETREE=y
++CONFIG_CMDLINE_BOOL=y
++CONFIG_CMDLINE=""
++CONFIG_SECCOMP=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++# CONFIG_PCIEPORTBUS is not set
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++CONFIG_PCI_LEGACY=y
++# CONFIG_PCI_DEBUG is not set
++# CONFIG_PCCARD is not set
++# CONFIG_HOTPLUG_PCI is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_CONSISTENT_START=0xff100000
++CONFIG_CONSISTENT_SIZE=0x00200000
++CONFIG_BOOT_LOAD=0x01000000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++CONFIG_CONNECTOR=y
++CONFIG_PROC_EVENTS=y
++# CONFIG_MTD is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++# CONFIG_BLK_DEV_LOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=35000
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_XILINX_SYSACE is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_SGI_IOC4 is not set
++# CONFIG_TIFM_CORE is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++CONFIG_MACINTOSH_DRIVERS=y
++# CONFIG_MAC_EMUMOUSEBTN is not set
++# CONFIG_WINDFARM is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++# CONFIG_PHYLIB is not set
++CONFIG_NET_ETHERNET=y
++# CONFIG_MII is not set
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++CONFIG_IBM_NEW_EMAC=y
++CONFIG_IBM_NEW_EMAC_RXB=128
++CONFIG_IBM_NEW_EMAC_TXB=64
++CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
++CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
++CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
++# CONFIG_IBM_NEW_EMAC_DEBUG is not set
++CONFIG_IBM_NEW_EMAC_ZMII=y
++CONFIG_IBM_NEW_EMAC_RGMII=y
++CONFIG_IBM_NEW_EMAC_TAH=y
++CONFIG_IBM_NEW_EMAC_EMAC4=y
++# CONFIG_NET_PCI is not set
++# CONFIG_B44 is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++# CONFIG_E1000 is not set
++# CONFIG_E1000E is not set
++# CONFIG_E1000E_ENABLED is not set
++# CONFIG_IP1000 is not set
++# CONFIG_IGB is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++# CONFIG_R8169 is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_VIA_VELOCITY is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++# CONFIG_QLA3XXX is not set
++# CONFIG_ATL1 is not set
++CONFIG_NETDEV_10000=y
++# CONFIG_CHELSIO_T1 is not set
++# CONFIG_CHELSIO_T3 is not set
++# CONFIG_IXGBE is not set
++# CONFIG_IXGB is not set
++# CONFIG_S2IO is not set
++# CONFIG_MYRI10GE is not set
++# CONFIG_NETXEN_NIC is not set
++# CONFIG_NIU is not set
++# CONFIG_MLX4_CORE is not set
++# CONFIG_TEHUTI is not set
++# CONFIG_BNX2X is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++# CONFIG_INPUT is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++# CONFIG_SERIAL_8250_PCI is not set
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++CONFIG_SERIAL_8250_EXTENDED=y
++# CONFIG_SERIAL_8250_MANY_PORTS is not set
++CONFIG_SERIAL_8250_SHARE_IRQ=y
++# CONFIG_SERIAL_8250_DETECT_IRQ is not set
++# CONFIG_SERIAL_8250_RSA is not set
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_JSM is not set
++CONFIG_SERIAL_OF_PLATFORM=y
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_NVRAM is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++# CONFIG_I2C is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++CONFIG_THERMAL=y
++# CONFIG_WATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++
++#
++# Graphics support
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=m
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++# CONFIG_USB is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++# CONFIG_RTC_CLASS is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4DEV_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_CRAMFS=y
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_DEBUG_STACKOVERFLOW is not set
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++CONFIG_DEBUGGER=y
++# CONFIG_KGDB is not set
++# CONFIG_XMON is not set
++# CONFIG_VIRQ_DEBUG is not set
++# CONFIG_BDI_SWITCH is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++# CONFIG_CRYPTO_SEQIV is not set
++CONFIG_CRYPTO_MANAGER=y
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++CONFIG_CRYPTO_ECB=y
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=y
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_CRYPTO_DEV_HIFN_795X is not set
++# CONFIG_PPC_CLOCK is not set
+--- /dev/null
++++ b/arch/powerpc/configs/44x/warp_defconfig
+@@ -0,0 +1,1110 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc2
++# Fri Feb 15 21:54:43 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++# CONFIG_6xx is not set
++# CONFIG_PPC_85xx is not set
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++CONFIG_44x=y
++# CONFIG_E200 is not set
++CONFIG_PPC_FPU=y
++CONFIG_4xx=y
++CONFIG_BOOKE=y
++CONFIG_PTE_64BIT=y
++CONFIG_PHYS_64BIT=y
++# CONFIG_PPC_MM_SLICES is not set
++CONFIG_NOT_COHERENT_CACHE=y
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++# CONFIG_DEFAULT_UIMAGE is not set
++CONFIG_PPC_DCR_NATIVE=y
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_PPC_DCR=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION="-pika"
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++CONFIG_FAIR_GROUP_SCHED=y
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++# CONFIG_HOTPLUG is not set
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++# CONFIG_PREEMPT_RCU is not set
++
++#
++# Platform support
++#
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++# CONFIG_BAMBOO is not set
++# CONFIG_EBONY is not set
++# CONFIG_SEQUOIA is not set
++# CONFIG_TAISHAN is not set
++# CONFIG_KATMAI is not set
++# CONFIG_RAINIER is not set
++CONFIG_WARP=y
++CONFIG_440EP=y
++CONFIG_IBM440EP_ERR42=y
++# CONFIG_IPIC is not set
++# CONFIG_MPIC is not set
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++# CONFIG_FSL_ULI1575 is not set
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++# CONFIG_TICK_ONESHOT is not set
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++# CONFIG_HZ_250 is not set
++# CONFIG_HZ_300 is not set
++CONFIG_HZ_1000=y
++CONFIG_HZ=1000
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_RCU_TRACE=y
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_MATH_EMULATION is not set
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++CONFIG_RESOURCES_64BIT=y
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_PROC_DEVICETREE=y
++CONFIG_CMDLINE_BOOL=y
++CONFIG_CMDLINE="ip=on"
++CONFIG_SECCOMP=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++# CONFIG_PCI is not set
++# CONFIG_PCI_DOMAINS is not set
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_CONSISTENT_START=0xff100000
++CONFIG_CONSISTENT_SIZE=0x00200000
++CONFIG_BOOT_LOAD=0x01000000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++# CONFIG_IP_PNP_BOOTP is not set
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IP_VS is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++CONFIG_NETFILTER=y
++# CONFIG_NETFILTER_DEBUG is not set
++CONFIG_NETFILTER_ADVANCED=y
++
++#
++# Core Netfilter Configuration
++#
++# CONFIG_NETFILTER_NETLINK_QUEUE is not set
++# CONFIG_NETFILTER_NETLINK_LOG is not set
++# CONFIG_NF_CONNTRACK is not set
++# CONFIG_NETFILTER_XTABLES is not set
++
++#
++# IP: Netfilter Configuration
++#
++# CONFIG_IP_NF_QUEUE is not set
++# CONFIG_IP_NF_IPTABLES is not set
++# CONFIG_IP_NF_ARPTABLES is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++CONFIG_VLAN_8021Q=y
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++# CONFIG_STANDALONE is not set
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++# CONFIG_MTD_CMDLINE_PARTS is not set
++CONFIG_MTD_OF_PARTS=y
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++CONFIG_MTD_OOPS=m
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PHYSMAP is not set
++CONFIG_MTD_PHYSMAP_OF=y
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++CONFIG_MTD_NAND=y
++# CONFIG_MTD_NAND_VERIFY_WRITE is not set
++CONFIG_MTD_NAND_ECC_SMC=y
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
++# CONFIG_MTD_NAND_NANDSIM is not set
++# CONFIG_MTD_NAND_PLATFORM is not set
++# CONFIG_MTD_ALAUDA is not set
++# CONFIG_MTD_NAND_FSL_ELBC is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++# CONFIG_BLK_DEV_LOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_UB is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=4096
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_XILINX_SYSACE is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++CONFIG_SCSI_SPI_ATTRS=y
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++# CONFIG_SCSI_LOWLEVEL is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_PHYLIB is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++CONFIG_IBM_NEW_EMAC=y
++CONFIG_IBM_NEW_EMAC_RXB=128
++CONFIG_IBM_NEW_EMAC_TXB=64
++CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
++CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
++CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
++# CONFIG_IBM_NEW_EMAC_DEBUG is not set
++CONFIG_IBM_NEW_EMAC_ZMII=y
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_B44 is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET is not set
++# CONFIG_WAN is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++# CONFIG_INPUT is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++CONFIG_SERIAL_8250_EXTENDED=y
++# CONFIG_SERIAL_8250_MANY_PORTS is not set
++CONFIG_SERIAL_8250_SHARE_IRQ=y
++# CONFIG_SERIAL_8250_DETECT_IRQ is not set
++# CONFIG_SERIAL_8250_RSA is not set
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_OF_PLATFORM is not set
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++CONFIG_HW_RANDOM=y
++# CONFIG_NVRAM is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++# CONFIG_I2C_CHARDEV is not set
++
++#
++# I2C Algorithms
++#
++# CONFIG_I2C_ALGOBIT is not set
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++# CONFIG_I2C_MPC is not set
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_TINY_USB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++CONFIG_SENSORS_EEPROM=y
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_SENSORS_AD7418 is not set
++# CONFIG_SENSORS_ADM1021 is not set
++# CONFIG_SENSORS_ADM1025 is not set
++# CONFIG_SENSORS_ADM1026 is not set
++# CONFIG_SENSORS_ADM1029 is not set
++# CONFIG_SENSORS_ADM1031 is not set
++# CONFIG_SENSORS_ADM9240 is not set
++# CONFIG_SENSORS_ADT7470 is not set
++# CONFIG_SENSORS_ATXP1 is not set
++# CONFIG_SENSORS_DS1621 is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_F71882FG is not set
++# CONFIG_SENSORS_F75375S is not set
++# CONFIG_SENSORS_GL518SM is not set
++# CONFIG_SENSORS_GL520SM is not set
++# CONFIG_SENSORS_IT87 is not set
++# CONFIG_SENSORS_LM63 is not set
++# CONFIG_SENSORS_LM75 is not set
++# CONFIG_SENSORS_LM77 is not set
++# CONFIG_SENSORS_LM78 is not set
++# CONFIG_SENSORS_LM80 is not set
++# CONFIG_SENSORS_LM83 is not set
++# CONFIG_SENSORS_LM85 is not set
++# CONFIG_SENSORS_LM87 is not set
++# CONFIG_SENSORS_LM90 is not set
++# CONFIG_SENSORS_LM92 is not set
++# CONFIG_SENSORS_LM93 is not set
++# CONFIG_SENSORS_MAX1619 is not set
++# CONFIG_SENSORS_MAX6650 is not set
++# CONFIG_SENSORS_PC87360 is not set
++# CONFIG_SENSORS_PC87427 is not set
++# CONFIG_SENSORS_DME1737 is not set
++# CONFIG_SENSORS_SMSC47M1 is not set
++# CONFIG_SENSORS_SMSC47M192 is not set
++# CONFIG_SENSORS_SMSC47B397 is not set
++# CONFIG_SENSORS_ADS7828 is not set
++# CONFIG_SENSORS_THMC50 is not set
++# CONFIG_SENSORS_VT1211 is not set
++# CONFIG_SENSORS_W83781D is not set
++# CONFIG_SENSORS_W83791D is not set
++# CONFIG_SENSORS_W83792D is not set
++# CONFIG_SENSORS_W83793 is not set
++# CONFIG_SENSORS_W83L785TS is not set
++# CONFIG_SENSORS_W83L786NG is not set
++# CONFIG_SENSORS_W83627HF is not set
++# CONFIG_SENSORS_W83627EHF is not set
++# CONFIG_HWMON_DEBUG_CHIP is not set
++CONFIG_THERMAL=y
++# CONFIG_WATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
++
++#
++# Miscellaneous USB options
++#
++# CONFIG_USB_DEVICEFS is not set
++CONFIG_USB_DEVICE_CLASS=y
++# CONFIG_USB_DYNAMIC_MINORS is not set
++# CONFIG_USB_OTG is not set
++
++#
++# USB Host Controller Drivers
++#
++# CONFIG_USB_ISP116X_HCD is not set
++CONFIG_USB_OHCI_HCD=y
++CONFIG_USB_OHCI_HCD_PPC_OF=y
++CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
++# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
++CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
++CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
++CONFIG_USB_OHCI_LITTLE_ENDIAN=y
++# CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
++
++#
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++# CONFIG_USB_PRINTER is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# may also be needed; see USB_STORAGE Help for more information
++#
++CONFIG_USB_STORAGE=y
++# CONFIG_USB_STORAGE_DEBUG is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_ISD200 is not set
++# CONFIG_USB_STORAGE_DPCM is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++CONFIG_USB_MON=y
++
++#
++# USB port drivers
++#
++# CONFIG_USB_SERIAL is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_AUERSWALD is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_PHIDGET is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++# CONFIG_USB_GADGET is not set
++CONFIG_MMC=m
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++
++#
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=m
++CONFIG_MMC_BLOCK_BOUNCE=y
++# CONFIG_SDIO_UART is not set
++
++#
++# MMC/SD Host Controller Drivers
++#
++# CONFIG_MMC_WBSD is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_EDAC is not set
++# CONFIG_RTC_CLASS is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4DEV_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++# CONFIG_TMPFS is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++CONFIG_CRAMFS=y
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++CONFIG_NLS_CODEPAGE_850=y
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++CONFIG_NLS_ASCII=y
++CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++CONFIG_NLS_ISO8859_15=y
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++CONFIG_NLS_UTF8=y
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_CRC_CCITT=y
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++# CONFIG_SCHED_DEBUG is not set
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_DEBUG_SLAB is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++CONFIG_DEBUG_INFO=y
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_DEBUG_STACKOVERFLOW is not set
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++# CONFIG_DEBUGGER is not set
++# CONFIG_VIRQ_DEBUG is not set
++CONFIG_BDI_SWITCH=y
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_SEQIV is not set
++# CONFIG_CRYPTO_MANAGER is not set
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++# CONFIG_CRYPTO_MD5 is not set
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++# CONFIG_CRYPTO_CBC is not set
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++# CONFIG_CRYPTO_DES is not set
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_PPC_CLOCK is not set
+--- /dev/null
++++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+@@ -0,0 +1,1395 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc6
++# Fri Apr 11 11:10:09 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++CONFIG_6xx=y
++# CONFIG_PPC_85xx is not set
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++# CONFIG_44x is not set
++# CONFIG_E200 is not set
++CONFIG_PPC_FPU=y
++# CONFIG_FSL_EMB_PERFMON is not set
++CONFIG_PPC_STD_MMU=y
++CONFIG_PPC_STD_MMU_32=y
++# CONFIG_PPC_MM_SLICES is not set
++# CONFIG_SMP is not set
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFAULT_UIMAGE=y
++# CONFIG_PPC_DCR_NATIVE is not set
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++# CONFIG_FAIR_GROUP_SCHED is not set
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++# CONFIG_KALLSYMS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++# CONFIG_EPOLL is not set
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++# CONFIG_KMOD is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++
++#
++# Platform support
++#
++# CONFIG_PPC_MULTIPLATFORM is not set
++# CONFIG_PPC_82xx is not set
++CONFIG_PPC_83xx=y
++# CONFIG_PPC_86xx is not set
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++CONFIG_MPC83xx=y
++CONFIG_MPC831x_RDB=y
++# CONFIG_MPC832x_MDS is not set
++# CONFIG_MPC832x_RDB is not set
++# CONFIG_MPC834x_MDS is not set
++# CONFIG_MPC834x_ITX is not set
++# CONFIG_MPC836x_MDS is not set
++# CONFIG_MPC837x_MDS is not set
++# CONFIG_MPC837x_RDB is not set
++# CONFIG_SBC834x is not set
++CONFIG_PPC_MPC831x=y
++CONFIG_IPIC=y
++# CONFIG_MPIC is not set
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++# CONFIG_FSL_ULI1575 is not set
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++CONFIG_FORCE_MAX_ZONEORDER=11
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_PROC_DEVICETREE=y
++# CONFIG_CMDLINE_BOOL is not set
++# CONFIG_PM is not set
++CONFIG_SECCOMP=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_GENERIC_ISA_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_FSL_SOC=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++# CONFIG_PCIEPORTBUS is not set
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++CONFIG_PCI_LEGACY=y
++# CONFIG_PCI_DEBUG is not set
++# CONFIG_PCCARD is not set
++# CONFIG_HOTPLUG_PCI is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_BOOT_LOAD=0x00800000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_FW_LOADER is not set
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++# CONFIG_MTD_CMDLINE_PARTS is not set
++CONFIG_MTD_OF_PARTS=y
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PHYSMAP is not set
++CONFIG_MTD_PHYSMAP_OF=y
++# CONFIG_MTD_INTEL_VR_NOR is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_PMC551 is not set
++# CONFIG_MTD_DATAFLASH is not set
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++CONFIG_MTD_NAND=y
++CONFIG_MTD_NAND_VERIFY_WRITE=y
++# CONFIG_MTD_NAND_ECC_SMC is not set
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
++# CONFIG_MTD_NAND_CAFE is not set
++# CONFIG_MTD_NAND_NANDSIM is not set
++# CONFIG_MTD_NAND_PLATFORM is not set
++# CONFIG_MTD_ALAUDA is not set
++CONFIG_MTD_NAND_FSL_ELBC=y
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++# CONFIG_BLK_DEV_UB is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=32768
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_SGI_IOC4 is not set
++# CONFIG_TIFM_CORE is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++# CONFIG_BLK_DEV_SD is not set
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++CONFIG_CHR_DEV_SG=y
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++CONFIG_SCSI_SPI_ATTRS=y
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
++# CONFIG_SCSI_3W_9XXX is not set
++# CONFIG_SCSI_ACARD is not set
++# CONFIG_SCSI_AACRAID is not set
++# CONFIG_SCSI_AIC7XXX is not set
++# CONFIG_SCSI_AIC7XXX_OLD is not set
++# CONFIG_SCSI_AIC79XX is not set
++# CONFIG_SCSI_AIC94XX is not set
++# CONFIG_SCSI_DPT_I2O is not set
++# CONFIG_SCSI_ADVANSYS is not set
++# CONFIG_SCSI_ARCMSR is not set
++# CONFIG_MEGARAID_NEWGEN is not set
++# CONFIG_MEGARAID_LEGACY is not set
++# CONFIG_MEGARAID_SAS is not set
++# CONFIG_SCSI_HPTIOP is not set
++# CONFIG_SCSI_BUSLOGIC is not set
++# CONFIG_SCSI_DMX3191D is not set
++# CONFIG_SCSI_EATA is not set
++# CONFIG_SCSI_FUTURE_DOMAIN is not set
++# CONFIG_SCSI_GDTH is not set
++# CONFIG_SCSI_IPS is not set
++# CONFIG_SCSI_INITIO is not set
++# CONFIG_SCSI_INIA100 is not set
++# CONFIG_SCSI_MVSAS is not set
++# CONFIG_SCSI_STEX is not set
++# CONFIG_SCSI_SYM53C8XX_2 is not set
++# CONFIG_SCSI_QLOGIC_1280 is not set
++# CONFIG_SCSI_QLA_FC is not set
++# CONFIG_SCSI_QLA_ISCSI is not set
++# CONFIG_SCSI_LPFC is not set
++# CONFIG_SCSI_DC395x is not set
++# CONFIG_SCSI_DC390T is not set
++# CONFIG_SCSI_NSP32 is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_SCSI_SRP is not set
++# CONFIG_ATA is not set
++CONFIG_MD=y
++CONFIG_BLK_DEV_MD=y
++CONFIG_MD_LINEAR=y
++CONFIG_MD_RAID0=y
++CONFIG_MD_RAID1=y
++# CONFIG_MD_RAID10 is not set
++# CONFIG_MD_RAID456 is not set
++# CONFIG_MD_MULTIPATH is not set
++# CONFIG_MD_FAULTY is not set
++# CONFIG_BLK_DEV_DM is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++CONFIG_CICADA_PHY=y
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_ENC28J60 is not set
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++CONFIG_NET_PCI=y
++# CONFIG_PCNET32 is not set
++# CONFIG_AMD8111_ETH is not set
++# CONFIG_ADAPTEC_STARFIRE is not set
++# CONFIG_B44 is not set
++# CONFIG_FORCEDETH is not set
++# CONFIG_EEPRO100 is not set
++CONFIG_E100=y
++# CONFIG_FEALNX is not set
++# CONFIG_NATSEMI is not set
++# CONFIG_NE2K_PCI is not set
++# CONFIG_8139CP is not set
++# CONFIG_8139TOO is not set
++# CONFIG_R6040 is not set
++# CONFIG_SIS900 is not set
++# CONFIG_EPIC100 is not set
++# CONFIG_SUNDANCE is not set
++# CONFIG_TLAN is not set
++# CONFIG_VIA_RHINE is not set
++# CONFIG_SC92031 is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++# CONFIG_E1000 is not set
++# CONFIG_E1000E is not set
++# CONFIG_E1000E_ENABLED is not set
++# CONFIG_IP1000 is not set
++# CONFIG_IGB is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++# CONFIG_R8169 is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_VIA_VELOCITY is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++CONFIG_GIANFAR=y
++CONFIG_GFAR_NAPI=y
++# CONFIG_QLA3XXX is not set
++# CONFIG_ATL1 is not set
++CONFIG_NETDEV_10000=y
++# CONFIG_CHELSIO_T1 is not set
++# CONFIG_CHELSIO_T3 is not set
++# CONFIG_IXGBE is not set
++# CONFIG_IXGB is not set
++# CONFIG_S2IO is not set
++# CONFIG_MYRI10GE is not set
++# CONFIG_NETXEN_NIC is not set
++# CONFIG_NIU is not set
++# CONFIG_MLX4_CORE is not set
++# CONFIG_TEHUTI is not set
++# CONFIG_BNX2X is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NET_FC is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_PCI=y
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++# CONFIG_SERIAL_8250_EXTENDED is not set
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_JSM is not set
++# CONFIG_SERIAL_OF_PLATFORM is not set
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++CONFIG_HW_RANDOM=y
++# CONFIG_NVRAM is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=y
++
++#
++# I2C Algorithms
++#
++# CONFIG_I2C_ALGOBIT is not set
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++# CONFIG_I2C_ALI1535 is not set
++# CONFIG_I2C_ALI1563 is not set
++# CONFIG_I2C_ALI15X3 is not set
++# CONFIG_I2C_AMD756 is not set
++# CONFIG_I2C_AMD8111 is not set
++# CONFIG_I2C_I801 is not set
++# CONFIG_I2C_I810 is not set
++# CONFIG_I2C_PIIX4 is not set
++CONFIG_I2C_MPC=y
++# CONFIG_I2C_NFORCE2 is not set
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_PROSAVAGE is not set
++# CONFIG_I2C_SAVAGE4 is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_SIS5595 is not set
++# CONFIG_I2C_SIS630 is not set
++# CONFIG_I2C_SIS96X is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_TINY_USB is not set
++# CONFIG_I2C_VIA is not set
++# CONFIG_I2C_VIAPRO is not set
++# CONFIG_I2C_VOODOO3 is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_BITBANG=y
++CONFIG_SPI_MPC83xx=y
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_SENSORS_AD7418 is not set
++# CONFIG_SENSORS_ADM1021 is not set
++# CONFIG_SENSORS_ADM1025 is not set
++# CONFIG_SENSORS_ADM1026 is not set
++# CONFIG_SENSORS_ADM1029 is not set
++# CONFIG_SENSORS_ADM1031 is not set
++# CONFIG_SENSORS_ADM9240 is not set
++# CONFIG_SENSORS_ADT7470 is not set
++# CONFIG_SENSORS_ADT7473 is not set
++# CONFIG_SENSORS_ATXP1 is not set
++# CONFIG_SENSORS_DS1621 is not set
++# CONFIG_SENSORS_I5K_AMB is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_F71882FG is not set
++# CONFIG_SENSORS_F75375S is not set
++# CONFIG_SENSORS_GL518SM is not set
++# CONFIG_SENSORS_GL520SM is not set
++# CONFIG_SENSORS_IT87 is not set
++# CONFIG_SENSORS_LM63 is not set
++# CONFIG_SENSORS_LM70 is not set
++# CONFIG_SENSORS_LM75 is not set
++# CONFIG_SENSORS_LM77 is not set
++# CONFIG_SENSORS_LM78 is not set
++# CONFIG_SENSORS_LM80 is not set
++# CONFIG_SENSORS_LM83 is not set
++# CONFIG_SENSORS_LM85 is not set
++# CONFIG_SENSORS_LM87 is not set
++# CONFIG_SENSORS_LM90 is not set
++# CONFIG_SENSORS_LM92 is not set
++# CONFIG_SENSORS_LM93 is not set
++# CONFIG_SENSORS_MAX1619 is not set
++# CONFIG_SENSORS_MAX6650 is not set
++# CONFIG_SENSORS_PC87360 is not set
++# CONFIG_SENSORS_PC87427 is not set
++# CONFIG_SENSORS_SIS5595 is not set
++# CONFIG_SENSORS_DME1737 is not set
++# CONFIG_SENSORS_SMSC47M1 is not set
++# CONFIG_SENSORS_SMSC47M192 is not set
++# CONFIG_SENSORS_SMSC47B397 is not set
++# CONFIG_SENSORS_ADS7828 is not set
++# CONFIG_SENSORS_THMC50 is not set
++# CONFIG_SENSORS_VIA686A is not set
++# CONFIG_SENSORS_VT1211 is not set
++# CONFIG_SENSORS_VT8231 is not set
++# CONFIG_SENSORS_W83781D is not set
++# CONFIG_SENSORS_W83791D is not set
++# CONFIG_SENSORS_W83792D is not set
++# CONFIG_SENSORS_W83793 is not set
++# CONFIG_SENSORS_W83L785TS is not set
++# CONFIG_SENSORS_W83L786NG is not set
++# CONFIG_SENSORS_W83627HF is not set
++# CONFIG_SENSORS_W83627EHF is not set
++# CONFIG_HWMON_DEBUG_CHIP is not set
++# CONFIG_THERMAL is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_83xx_WDT=y
++
++#
++# PCI-based Watchdog Cards
++#
++# CONFIG_PCIPCWATCHDOG is not set
++# CONFIG_WDTPCI is not set
++
++#
++# USB-based Watchdog Cards
++#
++# CONFIG_USBPCWATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++# CONFIG_USB_DABUSB is not set
++
++#
++# Graphics support
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=m
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
++
++#
++# USB Input Devices
++#
++# CONFIG_USB_HID is not set
++
++#
++# USB HID Boot Protocol drivers
++#
++# CONFIG_USB_KBD is not set
++# CONFIG_USB_MOUSE is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
++
++#
++# Miscellaneous USB options
++#
++CONFIG_USB_DEVICEFS=y
++CONFIG_USB_DEVICE_CLASS=y
++# CONFIG_USB_DYNAMIC_MINORS is not set
++# CONFIG_USB_OTG is not set
++
++#
++# USB Host Controller Drivers
++#
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_EHCI_ROOT_HUB_TT=y
++# CONFIG_USB_EHCI_TT_NEWSCHED is not set
++CONFIG_USB_EHCI_FSL=y
++CONFIG_USB_EHCI_HCD_PPC_OF=y
++# CONFIG_USB_ISP116X_HCD is not set
++CONFIG_USB_OHCI_HCD=y
++CONFIG_USB_OHCI_HCD_PPC_OF=y
++CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
++# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
++CONFIG_USB_OHCI_HCD_PCI=y
++CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
++CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
++CONFIG_USB_OHCI_LITTLE_ENDIAN=y
++CONFIG_USB_UHCI_HCD=y
++# CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
++
++#
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++# CONFIG_USB_PRINTER is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# may also be needed; see USB_STORAGE Help for more information
++#
++CONFIG_USB_STORAGE=y
++# CONFIG_USB_STORAGE_DEBUG is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_ISD200 is not set
++# CONFIG_USB_STORAGE_DPCM is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++CONFIG_USB_MON=y
++
++#
++# USB port drivers
++#
++# CONFIG_USB_SERIAL is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_AUERSWALD is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_PHIDGET is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_SISUSBVGA is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++# CONFIG_USB_TEST is not set
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++# CONFIG_USB_GADGET_ATMEL_USBA is not set
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++CONFIG_USB_GADGET_NET2280=y
++CONFIG_USB_NET2280=y
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++# CONFIG_USB_ZERO is not set
++CONFIG_USB_ETH=y
++CONFIG_USB_ETH_RNDIS=y
++# CONFIG_USB_GADGETFS is not set
++# CONFIG_USB_FILE_STORAGE is not set
++# CONFIG_USB_G_SERIAL is not set
++# CONFIG_USB_MIDI_GADGET is not set
++# CONFIG_USB_G_PRINTER is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++CONFIG_RTC_INTF_DEV_UIE_EMUL=y
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++CONFIG_RTC_DRV_DS1307=y
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++# CONFIG_RTC_DRV_S35390A is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_RTC_DRV_R9701 is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++# CONFIG_DMADEVICES is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++CONFIG_NFS_V4=y
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++CONFIG_SUNRPC_GSS=y
++# CONFIG_SUNRPC_BIND34 is not set
++CONFIG_RPCSEC_GSS_KRB5=y
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++# CONFIG_MAC_PARTITION is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_BSD_DISKLABEL is not set
++# CONFIG_MINIX_SUBPARTITION is not set
++# CONFIG_SOLARIS_X86_PARTITION is not set
++# CONFIG_UNIXWARE_DISKLABEL is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++CONFIG_HAVE_LMB=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_DEBUG_STACKOVERFLOW is not set
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++# CONFIG_DEBUGGER is not set
++# CONFIG_BDI_SWITCH is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++# CONFIG_CRYPTO_SEQIV is not set
++CONFIG_CRYPTO_MANAGER=y
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=m
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_CRYPTO_DEV_HIFN_795X is not set
++# CONFIG_PPC_CLOCK is not set
+--- /dev/null
++++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
+@@ -0,0 +1,1451 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc6
++# Mon Mar 24 08:48:15 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++CONFIG_6xx=y
++# CONFIG_PPC_85xx is not set
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++# CONFIG_44x is not set
++# CONFIG_E200 is not set
++CONFIG_PPC_FPU=y
++# CONFIG_FSL_EMB_PERFMON is not set
++CONFIG_PPC_STD_MMU=y
++CONFIG_PPC_STD_MMU_32=y
++# CONFIG_PPC_MM_SLICES is not set
++# CONFIG_SMP is not set
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFAULT_UIMAGE=y
++# CONFIG_PPC_DCR_NATIVE is not set
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++# CONFIG_FAIR_GROUP_SCHED is not set
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++# CONFIG_KALLSYMS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++# CONFIG_EPOLL is not set
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++# CONFIG_KMOD is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++
++#
++# Platform support
++#
++# CONFIG_PPC_MULTIPLATFORM is not set
++# CONFIG_PPC_82xx is not set
++CONFIG_PPC_83xx=y
++# CONFIG_PPC_86xx is not set
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++CONFIG_MPC83xx=y
++CONFIG_MPC831x_RDB=y
++# CONFIG_MPC832x_MDS is not set
++# CONFIG_MPC832x_RDB is not set
++# CONFIG_MPC834x_MDS is not set
++# CONFIG_MPC834x_ITX is not set
++# CONFIG_MPC836x_MDS is not set
++# CONFIG_MPC837x_MDS is not set
++# CONFIG_MPC837x_RDB is not set
++# CONFIG_SBC834x is not set
++CONFIG_PPC_MPC831x=y
++CONFIG_IPIC=y
++# CONFIG_MPIC is not set
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++# CONFIG_FSL_ULI1575 is not set
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_PROC_DEVICETREE=y
++# CONFIG_CMDLINE_BOOL is not set
++# CONFIG_PM is not set
++CONFIG_SECCOMP=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_GENERIC_ISA_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_FSL_SOC=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++# CONFIG_PCIEPORTBUS is not set
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++CONFIG_PCI_LEGACY=y
++# CONFIG_PCI_DEBUG is not set
++# CONFIG_PCCARD is not set
++# CONFIG_HOTPLUG_PCI is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_BOOT_LOAD=0x00800000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_FW_LOADER is not set
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++# CONFIG_MTD_CMDLINE_PARTS is not set
++# CONFIG_MTD_OF_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PHYSMAP is not set
++CONFIG_MTD_PHYSMAP_OF=y
++# CONFIG_MTD_INTEL_VR_NOR is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_PMC551 is not set
++# CONFIG_MTD_DATAFLASH is not set
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++CONFIG_MTD_NAND=y
++CONFIG_MTD_NAND_VERIFY_WRITE=y
++# CONFIG_MTD_NAND_ECC_SMC is not set
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
++# CONFIG_MTD_NAND_CAFE is not set
++# CONFIG_MTD_NAND_NANDSIM is not set
++# CONFIG_MTD_NAND_PLATFORM is not set
++# CONFIG_MTD_ALAUDA is not set
++# CONFIG_MTD_NAND_FSL_ELBC is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++# CONFIG_BLK_DEV_UB is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=32768
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_SGI_IOC4 is not set
++# CONFIG_TIFM_CORE is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++# CONFIG_BLK_DEV_SD is not set
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++CONFIG_CHR_DEV_SG=y
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++CONFIG_SCSI_SPI_ATTRS=y
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
++# CONFIG_SCSI_3W_9XXX is not set
++# CONFIG_SCSI_ACARD is not set
++# CONFIG_SCSI_AACRAID is not set
++# CONFIG_SCSI_AIC7XXX is not set
++# CONFIG_SCSI_AIC7XXX_OLD is not set
++# CONFIG_SCSI_AIC79XX is not set
++# CONFIG_SCSI_AIC94XX is not set
++# CONFIG_SCSI_DPT_I2O is not set
++# CONFIG_SCSI_ADVANSYS is not set
++# CONFIG_SCSI_ARCMSR is not set
++# CONFIG_MEGARAID_NEWGEN is not set
++# CONFIG_MEGARAID_LEGACY is not set
++# CONFIG_MEGARAID_SAS is not set
++# CONFIG_SCSI_HPTIOP is not set
++# CONFIG_SCSI_BUSLOGIC is not set
++# CONFIG_SCSI_DMX3191D is not set
++# CONFIG_SCSI_EATA is not set
++# CONFIG_SCSI_FUTURE_DOMAIN is not set
++# CONFIG_SCSI_GDTH is not set
++# CONFIG_SCSI_IPS is not set
++# CONFIG_SCSI_INITIO is not set
++# CONFIG_SCSI_INIA100 is not set
++# CONFIG_SCSI_MVSAS is not set
++# CONFIG_SCSI_STEX is not set
++# CONFIG_SCSI_SYM53C8XX_2 is not set
++# CONFIG_SCSI_IPR is not set
++# CONFIG_SCSI_QLOGIC_1280 is not set
++# CONFIG_SCSI_QLA_FC is not set
++# CONFIG_SCSI_QLA_ISCSI is not set
++# CONFIG_SCSI_LPFC is not set
++# CONFIG_SCSI_DC395x is not set
++# CONFIG_SCSI_DC390T is not set
++# CONFIG_SCSI_NSP32 is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_SCSI_SRP is not set
++CONFIG_ATA=y
++# CONFIG_ATA_NONSTANDARD is not set
++# CONFIG_SATA_AHCI is not set
++# CONFIG_SATA_SVW is not set
++# CONFIG_ATA_PIIX is not set
++# CONFIG_SATA_MV is not set
++# CONFIG_SATA_NV is not set
++# CONFIG_PDC_ADMA is not set
++# CONFIG_SATA_QSTOR is not set
++# CONFIG_SATA_PROMISE is not set
++# CONFIG_SATA_SX4 is not set
++# CONFIG_SATA_SIL is not set
++# CONFIG_SATA_SIL24 is not set
++# CONFIG_SATA_SIS is not set
++# CONFIG_SATA_ULI is not set
++# CONFIG_SATA_VIA is not set
++# CONFIG_SATA_VITESSE is not set
++# CONFIG_SATA_INIC162X is not set
++CONFIG_SATA_FSL=y
++# CONFIG_PATA_ALI is not set
++# CONFIG_PATA_AMD is not set
++# CONFIG_PATA_ARTOP is not set
++# CONFIG_PATA_ATIIXP is not set
++# CONFIG_PATA_CMD640_PCI is not set
++# CONFIG_PATA_CMD64X is not set
++# CONFIG_PATA_CS5520 is not set
++# CONFIG_PATA_CS5530 is not set
++# CONFIG_PATA_CYPRESS is not set
++# CONFIG_PATA_EFAR is not set
++# CONFIG_ATA_GENERIC is not set
++# CONFIG_PATA_HPT366 is not set
++# CONFIG_PATA_HPT37X is not set
++# CONFIG_PATA_HPT3X2N is not set
++# CONFIG_PATA_HPT3X3 is not set
++# CONFIG_PATA_IT821X is not set
++# CONFIG_PATA_IT8213 is not set
++# CONFIG_PATA_JMICRON is not set
++# CONFIG_PATA_TRIFLEX is not set
++# CONFIG_PATA_MARVELL is not set
++# CONFIG_PATA_MPIIX is not set
++# CONFIG_PATA_OLDPIIX is not set
++# CONFIG_PATA_NETCELL is not set
++# CONFIG_PATA_NINJA32 is not set
++# CONFIG_PATA_NS87410 is not set
++# CONFIG_PATA_NS87415 is not set
++# CONFIG_PATA_OPTI is not set
++# CONFIG_PATA_OPTIDMA is not set
++# CONFIG_PATA_PDC_OLD is not set
++# CONFIG_PATA_RADISYS is not set
++# CONFIG_PATA_RZ1000 is not set
++# CONFIG_PATA_SC1200 is not set
++# CONFIG_PATA_SERVERWORKS is not set
++# CONFIG_PATA_PDC2027X is not set
++# CONFIG_PATA_SIL680 is not set
++# CONFIG_PATA_SIS is not set
++# CONFIG_PATA_VIA is not set
++# CONFIG_PATA_WINBOND is not set
++# CONFIG_PATA_PLATFORM is not set
++CONFIG_MD=y
++CONFIG_BLK_DEV_MD=y
++CONFIG_MD_LINEAR=y
++CONFIG_MD_RAID0=y
++CONFIG_MD_RAID1=y
++# CONFIG_MD_RAID10 is not set
++# CONFIG_MD_RAID456 is not set
++# CONFIG_MD_MULTIPATH is not set
++# CONFIG_MD_FAULTY is not set
++# CONFIG_BLK_DEV_DM is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_ENC28J60 is not set
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++CONFIG_NET_PCI=y
++# CONFIG_PCNET32 is not set
++# CONFIG_AMD8111_ETH is not set
++# CONFIG_ADAPTEC_STARFIRE is not set
++# CONFIG_B44 is not set
++# CONFIG_FORCEDETH is not set
++# CONFIG_EEPRO100 is not set
++CONFIG_E100=y
++# CONFIG_FEALNX is not set
++# CONFIG_NATSEMI is not set
++# CONFIG_NE2K_PCI is not set
++# CONFIG_8139CP is not set
++# CONFIG_8139TOO is not set
++# CONFIG_R6040 is not set
++# CONFIG_SIS900 is not set
++# CONFIG_EPIC100 is not set
++# CONFIG_SUNDANCE is not set
++# CONFIG_TLAN is not set
++# CONFIG_VIA_RHINE is not set
++# CONFIG_SC92031 is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++# CONFIG_E1000 is not set
++# CONFIG_E1000E is not set
++# CONFIG_E1000E_ENABLED is not set
++# CONFIG_IP1000 is not set
++# CONFIG_IGB is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++# CONFIG_R8169 is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_VIA_VELOCITY is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++CONFIG_GIANFAR=y
++CONFIG_GFAR_NAPI=y
++# CONFIG_QLA3XXX is not set
++# CONFIG_ATL1 is not set
++CONFIG_NETDEV_10000=y
++# CONFIG_CHELSIO_T1 is not set
++# CONFIG_CHELSIO_T3 is not set
++# CONFIG_IXGBE is not set
++# CONFIG_IXGB is not set
++# CONFIG_S2IO is not set
++# CONFIG_MYRI10GE is not set
++# CONFIG_NETXEN_NIC is not set
++# CONFIG_NIU is not set
++# CONFIG_MLX4_CORE is not set
++# CONFIG_TEHUTI is not set
++# CONFIG_BNX2X is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NET_FC is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_PCI=y
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++# CONFIG_SERIAL_8250_EXTENDED is not set
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_JSM is not set
++# CONFIG_SERIAL_OF_PLATFORM is not set
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++CONFIG_HW_RANDOM=y
++# CONFIG_NVRAM is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=y
++
++#
++# I2C Algorithms
++#
++# CONFIG_I2C_ALGOBIT is not set
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++# CONFIG_I2C_ALI1535 is not set
++# CONFIG_I2C_ALI1563 is not set
++# CONFIG_I2C_ALI15X3 is not set
++# CONFIG_I2C_AMD756 is not set
++# CONFIG_I2C_AMD8111 is not set
++# CONFIG_I2C_I801 is not set
++# CONFIG_I2C_I810 is not set
++# CONFIG_I2C_PIIX4 is not set
++CONFIG_I2C_MPC=y
++# CONFIG_I2C_NFORCE2 is not set
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_PROSAVAGE is not set
++# CONFIG_I2C_SAVAGE4 is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_SIS5595 is not set
++# CONFIG_I2C_SIS630 is not set
++# CONFIG_I2C_SIS96X is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_TINY_USB is not set
++# CONFIG_I2C_VIA is not set
++# CONFIG_I2C_VIAPRO is not set
++# CONFIG_I2C_VOODOO3 is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_BITBANG=y
++CONFIG_SPI_MPC83xx=y
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_SENSORS_AD7418 is not set
++# CONFIG_SENSORS_ADM1021 is not set
++# CONFIG_SENSORS_ADM1025 is not set
++# CONFIG_SENSORS_ADM1026 is not set
++# CONFIG_SENSORS_ADM1029 is not set
++# CONFIG_SENSORS_ADM1031 is not set
++# CONFIG_SENSORS_ADM9240 is not set
++# CONFIG_SENSORS_ADT7470 is not set
++# CONFIG_SENSORS_ADT7473 is not set
++# CONFIG_SENSORS_ATXP1 is not set
++# CONFIG_SENSORS_DS1621 is not set
++# CONFIG_SENSORS_I5K_AMB is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_F71882FG is not set
++# CONFIG_SENSORS_F75375S is not set
++# CONFIG_SENSORS_GL518SM is not set
++# CONFIG_SENSORS_GL520SM is not set
++# CONFIG_SENSORS_IT87 is not set
++# CONFIG_SENSORS_LM63 is not set
++# CONFIG_SENSORS_LM70 is not set
++# CONFIG_SENSORS_LM75 is not set
++# CONFIG_SENSORS_LM77 is not set
++# CONFIG_SENSORS_LM78 is not set
++# CONFIG_SENSORS_LM80 is not set
++# CONFIG_SENSORS_LM83 is not set
++# CONFIG_SENSORS_LM85 is not set
++# CONFIG_SENSORS_LM87 is not set
++# CONFIG_SENSORS_LM90 is not set
++# CONFIG_SENSORS_LM92 is not set
++# CONFIG_SENSORS_LM93 is not set
++# CONFIG_SENSORS_MAX1619 is not set
++# CONFIG_SENSORS_MAX6650 is not set
++# CONFIG_SENSORS_PC87360 is not set
++# CONFIG_SENSORS_PC87427 is not set
++# CONFIG_SENSORS_SIS5595 is not set
++# CONFIG_SENSORS_DME1737 is not set
++# CONFIG_SENSORS_SMSC47M1 is not set
++# CONFIG_SENSORS_SMSC47M192 is not set
++# CONFIG_SENSORS_SMSC47B397 is not set
++# CONFIG_SENSORS_ADS7828 is not set
++# CONFIG_SENSORS_THMC50 is not set
++# CONFIG_SENSORS_VIA686A is not set
++# CONFIG_SENSORS_VT1211 is not set
++# CONFIG_SENSORS_VT8231 is not set
++# CONFIG_SENSORS_W83781D is not set
++# CONFIG_SENSORS_W83791D is not set
++# CONFIG_SENSORS_W83792D is not set
++# CONFIG_SENSORS_W83793 is not set
++# CONFIG_SENSORS_W83L785TS is not set
++# CONFIG_SENSORS_W83L786NG is not set
++# CONFIG_SENSORS_W83627HF is not set
++# CONFIG_SENSORS_W83627EHF is not set
++# CONFIG_HWMON_DEBUG_CHIP is not set
++# CONFIG_THERMAL is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_83xx_WDT=y
++
++#
++# PCI-based Watchdog Cards
++#
++# CONFIG_PCIPCWATCHDOG is not set
++# CONFIG_WDTPCI is not set
++
++#
++# USB-based Watchdog Cards
++#
++# CONFIG_USBPCWATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++# CONFIG_USB_DABUSB is not set
++
++#
++# Graphics support
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=m
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
++
++#
++# USB Input Devices
++#
++# CONFIG_USB_HID is not set
++
++#
++# USB HID Boot Protocol drivers
++#
++# CONFIG_USB_KBD is not set
++# CONFIG_USB_MOUSE is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
++
++#
++# Miscellaneous USB options
++#
++CONFIG_USB_DEVICEFS=y
++CONFIG_USB_DEVICE_CLASS=y
++# CONFIG_USB_DYNAMIC_MINORS is not set
++# CONFIG_USB_OTG is not set
++
++#
++# USB Host Controller Drivers
++#
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_EHCI_ROOT_HUB_TT=y
++# CONFIG_USB_EHCI_TT_NEWSCHED is not set
++CONFIG_USB_EHCI_FSL=y
++CONFIG_USB_EHCI_HCD_PPC_OF=y
++# CONFIG_USB_ISP116X_HCD is not set
++CONFIG_USB_OHCI_HCD=y
++CONFIG_USB_OHCI_HCD_PPC_OF=y
++CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
++# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
++CONFIG_USB_OHCI_HCD_PCI=y
++CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
++CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
++CONFIG_USB_OHCI_LITTLE_ENDIAN=y
++CONFIG_USB_UHCI_HCD=y
++# CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
++
++#
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++# CONFIG_USB_PRINTER is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# may also be needed; see USB_STORAGE Help for more information
++#
++CONFIG_USB_STORAGE=y
++# CONFIG_USB_STORAGE_DEBUG is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_ISD200 is not set
++# CONFIG_USB_STORAGE_DPCM is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++CONFIG_USB_MON=y
++
++#
++# USB port drivers
++#
++# CONFIG_USB_SERIAL is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_AUERSWALD is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_PHIDGET is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_SISUSBVGA is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++# CONFIG_USB_TEST is not set
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++# CONFIG_USB_GADGET_ATMEL_USBA is not set
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++CONFIG_USB_GADGET_NET2280=y
++CONFIG_USB_NET2280=y
++# CONFIG_USB_GADGET_PXA2XX is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++# CONFIG_USB_ZERO is not set
++CONFIG_USB_ETH=y
++CONFIG_USB_ETH_RNDIS=y
++# CONFIG_USB_GADGETFS is not set
++# CONFIG_USB_FILE_STORAGE is not set
++# CONFIG_USB_G_SERIAL is not set
++# CONFIG_USB_MIDI_GADGET is not set
++# CONFIG_USB_G_PRINTER is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++CONFIG_RTC_INTF_DEV_UIE_EMUL=y
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++CONFIG_RTC_DRV_DS1307=y
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++# CONFIG_RTC_DRV_S35390A is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_RTC_DRV_R9701 is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++# CONFIG_DMADEVICES is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++CONFIG_NFS_V4=y
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++CONFIG_SUNRPC_GSS=y
++# CONFIG_SUNRPC_BIND34 is not set
++CONFIG_RPCSEC_GSS_KRB5=y
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++# CONFIG_MAC_PARTITION is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_BSD_DISKLABEL is not set
++# CONFIG_MINIX_SUBPARTITION is not set
++# CONFIG_SOLARIS_X86_PARTITION is not set
++# CONFIG_UNIXWARE_DISKLABEL is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_DEBUG_STACKOVERFLOW is not set
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++# CONFIG_DEBUGGER is not set
++# CONFIG_BDI_SWITCH is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++# CONFIG_CRYPTO_SEQIV is not set
++CONFIG_CRYPTO_MANAGER=y
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=m
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_CRYPTO_DEV_HIFN_795X is not set
++# CONFIG_PPC_CLOCK is not set
+--- /dev/null
++++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
+@@ -0,0 +1,1081 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc7
++# Mon Mar 31 11:36:51 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++CONFIG_6xx=y
++# CONFIG_PPC_85xx is not set
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++# CONFIG_44x is not set
++# CONFIG_E200 is not set
++CONFIG_PPC_FPU=y
++# CONFIG_FSL_EMB_PERFMON is not set
++CONFIG_PPC_STD_MMU=y
++CONFIG_PPC_STD_MMU_32=y
++# CONFIG_PPC_MM_SLICES is not set
++# CONFIG_SMP is not set
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFAULT_UIMAGE=y
++# CONFIG_PPC_DCR_NATIVE is not set
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++# CONFIG_FAIR_GROUP_SCHED is not set
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++# CONFIG_KALLSYMS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++# CONFIG_EPOLL is not set
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++# CONFIG_KMOD is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++
++#
++# Platform support
++#
++# CONFIG_PPC_MULTIPLATFORM is not set
++# CONFIG_PPC_82xx is not set
++CONFIG_PPC_83xx=y
++# CONFIG_PPC_86xx is not set
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++CONFIG_MPC83xx=y
++# CONFIG_MPC831x_RDB is not set
++CONFIG_MPC832x_MDS=y
++# CONFIG_MPC832x_RDB is not set
++# CONFIG_MPC834x_MDS is not set
++# CONFIG_MPC834x_ITX is not set
++# CONFIG_MPC836x_MDS is not set
++# CONFIG_MPC837x_MDS is not set
++# CONFIG_MPC837x_RDB is not set
++# CONFIG_SBC834x is not set
++CONFIG_PPC_MPC832x=y
++CONFIG_IPIC=y
++# CONFIG_MPIC is not set
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++CONFIG_QUICC_ENGINE=y
++# CONFIG_FSL_ULI1575 is not set
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++CONFIG_MATH_EMULATION=y
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_PROC_DEVICETREE=y
++# CONFIG_CMDLINE_BOOL is not set
++# CONFIG_PM is not set
++CONFIG_SECCOMP=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_GENERIC_ISA_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_FSL_SOC=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++# CONFIG_PCIEPORTBUS is not set
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++CONFIG_PCI_LEGACY=y
++# CONFIG_PCCARD is not set
++# CONFIG_HOTPLUG_PCI is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_BOOT_LOAD=0x00800000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_FW_LOADER is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++# CONFIG_MTD is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=32768
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_SGI_IOC4 is not set
++# CONFIG_TIFM_CORE is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++# CONFIG_BLK_DEV_SD is not set
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
++# CONFIG_SCSI_3W_9XXX is not set
++# CONFIG_SCSI_ACARD is not set
++# CONFIG_SCSI_AACRAID is not set
++# CONFIG_SCSI_AIC7XXX is not set
++# CONFIG_SCSI_AIC7XXX_OLD is not set
++# CONFIG_SCSI_AIC79XX is not set
++# CONFIG_SCSI_AIC94XX is not set
++# CONFIG_SCSI_DPT_I2O is not set
++# CONFIG_SCSI_ADVANSYS is not set
++# CONFIG_SCSI_ARCMSR is not set
++# CONFIG_MEGARAID_NEWGEN is not set
++# CONFIG_MEGARAID_LEGACY is not set
++# CONFIG_MEGARAID_SAS is not set
++# CONFIG_SCSI_HPTIOP is not set
++# CONFIG_SCSI_BUSLOGIC is not set
++# CONFIG_SCSI_DMX3191D is not set
++# CONFIG_SCSI_EATA is not set
++# CONFIG_SCSI_FUTURE_DOMAIN is not set
++# CONFIG_SCSI_GDTH is not set
++# CONFIG_SCSI_IPS is not set
++# CONFIG_SCSI_INITIO is not set
++# CONFIG_SCSI_INIA100 is not set
++# CONFIG_SCSI_MVSAS is not set
++# CONFIG_SCSI_STEX is not set
++# CONFIG_SCSI_SYM53C8XX_2 is not set
++# CONFIG_SCSI_QLOGIC_1280 is not set
++# CONFIG_SCSI_QLA_FC is not set
++# CONFIG_SCSI_QLA_ISCSI is not set
++# CONFIG_SCSI_LPFC is not set
++# CONFIG_SCSI_DC395x is not set
++# CONFIG_SCSI_DC390T is not set
++# CONFIG_SCSI_NSP32 is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_SCSI_SRP is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++CONFIG_DAVICOM_PHY=y
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_NET_PCI is not set
++# CONFIG_B44 is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++# CONFIG_E1000 is not set
++# CONFIG_E1000E is not set
++# CONFIG_E1000E_ENABLED is not set
++# CONFIG_IP1000 is not set
++# CONFIG_IGB is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++# CONFIG_R8169 is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_VIA_VELOCITY is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++# CONFIG_GIANFAR is not set
++CONFIG_UCC_GETH=y
++# CONFIG_UGETH_NAPI is not set
++# CONFIG_UGETH_MAGIC_PACKET is not set
++# CONFIG_UGETH_FILTERING is not set
++# CONFIG_UGETH_TX_ON_DEMAND is not set
++# CONFIG_QLA3XXX is not set
++# CONFIG_ATL1 is not set
++CONFIG_NETDEV_10000=y
++# CONFIG_CHELSIO_T1 is not set
++# CONFIG_CHELSIO_T3 is not set
++# CONFIG_IXGBE is not set
++# CONFIG_IXGB is not set
++# CONFIG_S2IO is not set
++# CONFIG_MYRI10GE is not set
++# CONFIG_NETXEN_NIC is not set
++# CONFIG_NIU is not set
++# CONFIG_MLX4_CORE is not set
++# CONFIG_TEHUTI is not set
++# CONFIG_BNX2X is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NET_FC is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_PCI=y
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++# CONFIG_SERIAL_8250_EXTENDED is not set
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_JSM is not set
++# CONFIG_SERIAL_OF_PLATFORM is not set
++# CONFIG_SERIAL_QE is not set
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++CONFIG_HW_RANDOM=y
++# CONFIG_NVRAM is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=y
++
++#
++# I2C Algorithms
++#
++# CONFIG_I2C_ALGOBIT is not set
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++# CONFIG_I2C_ALI1535 is not set
++# CONFIG_I2C_ALI1563 is not set
++# CONFIG_I2C_ALI15X3 is not set
++# CONFIG_I2C_AMD756 is not set
++# CONFIG_I2C_AMD8111 is not set
++# CONFIG_I2C_I801 is not set
++# CONFIG_I2C_I810 is not set
++# CONFIG_I2C_PIIX4 is not set
++CONFIG_I2C_MPC=y
++# CONFIG_I2C_NFORCE2 is not set
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_PROSAVAGE is not set
++# CONFIG_I2C_SAVAGE4 is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_SIS5595 is not set
++# CONFIG_I2C_SIS630 is not set
++# CONFIG_I2C_SIS96X is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_VIA is not set
++# CONFIG_I2C_VIAPRO is not set
++# CONFIG_I2C_VOODOO3 is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_SENSORS_AD7418 is not set
++# CONFIG_SENSORS_ADM1021 is not set
++# CONFIG_SENSORS_ADM1025 is not set
++# CONFIG_SENSORS_ADM1026 is not set
++# CONFIG_SENSORS_ADM1029 is not set
++# CONFIG_SENSORS_ADM1031 is not set
++# CONFIG_SENSORS_ADM9240 is not set
++# CONFIG_SENSORS_ADT7470 is not set
++# CONFIG_SENSORS_ADT7473 is not set
++# CONFIG_SENSORS_ATXP1 is not set
++# CONFIG_SENSORS_DS1621 is not set
++# CONFIG_SENSORS_I5K_AMB is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_F71882FG is not set
++# CONFIG_SENSORS_F75375S is not set
++# CONFIG_SENSORS_GL518SM is not set
++# CONFIG_SENSORS_GL520SM is not set
++# CONFIG_SENSORS_IT87 is not set
++# CONFIG_SENSORS_LM63 is not set
++# CONFIG_SENSORS_LM75 is not set
++# CONFIG_SENSORS_LM77 is not set
++# CONFIG_SENSORS_LM78 is not set
++# CONFIG_SENSORS_LM80 is not set
++# CONFIG_SENSORS_LM83 is not set
++# CONFIG_SENSORS_LM85 is not set
++# CONFIG_SENSORS_LM87 is not set
++# CONFIG_SENSORS_LM90 is not set
++# CONFIG_SENSORS_LM92 is not set
++# CONFIG_SENSORS_LM93 is not set
++# CONFIG_SENSORS_MAX1619 is not set
++# CONFIG_SENSORS_MAX6650 is not set
++# CONFIG_SENSORS_PC87360 is not set
++# CONFIG_SENSORS_PC87427 is not set
++# CONFIG_SENSORS_SIS5595 is not set
++# CONFIG_SENSORS_DME1737 is not set
++# CONFIG_SENSORS_SMSC47M1 is not set
++# CONFIG_SENSORS_SMSC47M192 is not set
++# CONFIG_SENSORS_SMSC47B397 is not set
++# CONFIG_SENSORS_ADS7828 is not set
++# CONFIG_SENSORS_THMC50 is not set
++# CONFIG_SENSORS_VIA686A is not set
++# CONFIG_SENSORS_VT1211 is not set
++# CONFIG_SENSORS_VT8231 is not set
++# CONFIG_SENSORS_W83781D is not set
++# CONFIG_SENSORS_W83791D is not set
++# CONFIG_SENSORS_W83792D is not set
++# CONFIG_SENSORS_W83793 is not set
++# CONFIG_SENSORS_W83L785TS is not set
++# CONFIG_SENSORS_W83L786NG is not set
++# CONFIG_SENSORS_W83627HF is not set
++# CONFIG_SENSORS_W83627EHF is not set
++# CONFIG_HWMON_DEBUG_CHIP is not set
++# CONFIG_THERMAL is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_83xx_WDT=y
++
++#
++# PCI-based Watchdog Cards
++#
++# CONFIG_PCIPCWATCHDOG is not set
++# CONFIG_WDTPCI is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++
++#
++# Graphics support
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=m
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++# CONFIG_USB is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++CONFIG_RTC_DRV_DS1374=y
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++# CONFIG_RTC_DRV_S35390A is not set
++
++#
++# SPI RTC drivers
++#
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++# CONFIG_DMADEVICES is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++CONFIG_NFS_V4=y
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++CONFIG_SUNRPC_GSS=y
++# CONFIG_SUNRPC_BIND34 is not set
++CONFIG_RPCSEC_GSS_KRB5=y
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++# CONFIG_MAC_PARTITION is not set
++# CONFIG_MSDOS_PARTITION is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++CONFIG_UCC_FAST=y
++CONFIG_UCC=y
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_KERNEL is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++# CONFIG_CRYPTO_SEQIV is not set
++CONFIG_CRYPTO_MANAGER=y
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++CONFIG_CRYPTO_ECB=m
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=m
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_CRYPTO_DEV_HIFN_795X is not set
++# CONFIG_PPC_CLOCK is not set
++CONFIG_PPC_LIB_RHEAP=y
+--- /dev/null
++++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
+@@ -0,0 +1,1233 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc6
++# Mon Mar 24 08:48:16 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++CONFIG_6xx=y
++# CONFIG_PPC_85xx is not set
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++# CONFIG_44x is not set
++# CONFIG_E200 is not set
++CONFIG_PPC_FPU=y
++# CONFIG_FSL_EMB_PERFMON is not set
++CONFIG_PPC_STD_MMU=y
++CONFIG_PPC_STD_MMU_32=y
++# CONFIG_PPC_MM_SLICES is not set
++# CONFIG_SMP is not set
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFAULT_UIMAGE=y
++# CONFIG_PPC_DCR_NATIVE is not set
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++# CONFIG_FAIR_GROUP_SCHED is not set
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++# CONFIG_KALLSYMS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++# CONFIG_EPOLL is not set
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++# CONFIG_KMOD is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++
++#
++# Platform support
++#
++# CONFIG_PPC_MULTIPLATFORM is not set
++# CONFIG_PPC_82xx is not set
++CONFIG_PPC_83xx=y
++# CONFIG_PPC_86xx is not set
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++CONFIG_MPC83xx=y
++# CONFIG_MPC831x_RDB is not set
++# CONFIG_MPC832x_MDS is not set
++CONFIG_MPC832x_RDB=y
++# CONFIG_MPC834x_MDS is not set
++# CONFIG_MPC834x_ITX is not set
++# CONFIG_MPC836x_MDS is not set
++# CONFIG_MPC837x_MDS is not set
++# CONFIG_MPC837x_RDB is not set
++# CONFIG_SBC834x is not set
++CONFIG_PPC_MPC832x=y
++CONFIG_IPIC=y
++# CONFIG_MPIC is not set
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++CONFIG_QUICC_ENGINE=y
++# CONFIG_FSL_ULI1575 is not set
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++CONFIG_MATH_EMULATION=y
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_PROC_DEVICETREE=y
++# CONFIG_CMDLINE_BOOL is not set
++# CONFIG_PM is not set
++CONFIG_SECCOMP=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_GENERIC_ISA_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_FSL_SOC=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++# CONFIG_PCIEPORTBUS is not set
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++CONFIG_PCI_LEGACY=y
++# CONFIG_PCCARD is not set
++# CONFIG_HOTPLUG_PCI is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_BOOT_LOAD=0x00800000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_FW_LOADER is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++# CONFIG_MTD is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++# CONFIG_BLK_DEV_UB is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=32768
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_SGI_IOC4 is not set
++# CONFIG_TIFM_CORE is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
++# CONFIG_SCSI_3W_9XXX is not set
++# CONFIG_SCSI_ACARD is not set
++# CONFIG_SCSI_AACRAID is not set
++# CONFIG_SCSI_AIC7XXX is not set
++# CONFIG_SCSI_AIC7XXX_OLD is not set
++# CONFIG_SCSI_AIC79XX is not set
++# CONFIG_SCSI_AIC94XX is not set
++# CONFIG_SCSI_DPT_I2O is not set
++# CONFIG_SCSI_ADVANSYS is not set
++# CONFIG_SCSI_ARCMSR is not set
++# CONFIG_MEGARAID_NEWGEN is not set
++# CONFIG_MEGARAID_LEGACY is not set
++# CONFIG_MEGARAID_SAS is not set
++# CONFIG_SCSI_HPTIOP is not set
++# CONFIG_SCSI_BUSLOGIC is not set
++# CONFIG_SCSI_DMX3191D is not set
++# CONFIG_SCSI_EATA is not set
++# CONFIG_SCSI_FUTURE_DOMAIN is not set
++# CONFIG_SCSI_GDTH is not set
++# CONFIG_SCSI_IPS is not set
++# CONFIG_SCSI_INITIO is not set
++# CONFIG_SCSI_INIA100 is not set
++# CONFIG_SCSI_MVSAS is not set
++# CONFIG_SCSI_STEX is not set
++# CONFIG_SCSI_SYM53C8XX_2 is not set
++# CONFIG_SCSI_QLOGIC_1280 is not set
++# CONFIG_SCSI_QLA_FC is not set
++# CONFIG_SCSI_QLA_ISCSI is not set
++# CONFIG_SCSI_LPFC is not set
++# CONFIG_SCSI_DC395x is not set
++# CONFIG_SCSI_DC390T is not set
++# CONFIG_SCSI_NSP32 is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_SCSI_SRP is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++CONFIG_ICPLUS_PHY=y
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_ENC28J60 is not set
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_NET_PCI is not set
++# CONFIG_B44 is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++CONFIG_E1000=y
++# CONFIG_E1000_NAPI is not set
++# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
++# CONFIG_E1000E is not set
++# CONFIG_E1000E_ENABLED is not set
++# CONFIG_IP1000 is not set
++# CONFIG_IGB is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++# CONFIG_R8169 is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_VIA_VELOCITY is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++# CONFIG_GIANFAR is not set
++CONFIG_UCC_GETH=y
++CONFIG_UGETH_NAPI=y
++# CONFIG_UGETH_MAGIC_PACKET is not set
++# CONFIG_UGETH_FILTERING is not set
++# CONFIG_UGETH_TX_ON_DEMAND is not set
++# CONFIG_QLA3XXX is not set
++# CONFIG_ATL1 is not set
++CONFIG_NETDEV_10000=y
++# CONFIG_CHELSIO_T1 is not set
++# CONFIG_CHELSIO_T3 is not set
++# CONFIG_IXGBE is not set
++# CONFIG_IXGB is not set
++# CONFIG_S2IO is not set
++# CONFIG_MYRI10GE is not set
++# CONFIG_NETXEN_NIC is not set
++# CONFIG_NIU is not set
++# CONFIG_MLX4_CORE is not set
++# CONFIG_TEHUTI is not set
++# CONFIG_BNX2X is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NET_FC is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_PCI=y
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++# CONFIG_SERIAL_8250_EXTENDED is not set
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_JSM is not set
++# CONFIG_SERIAL_OF_PLATFORM is not set
++# CONFIG_SERIAL_QE is not set
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++CONFIG_HW_RANDOM=y
++# CONFIG_NVRAM is not set
++CONFIG_GEN_RTC=y
++# CONFIG_GEN_RTC_X is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=y
++
++#
++# I2C Algorithms
++#
++# CONFIG_I2C_ALGOBIT is not set
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++# CONFIG_I2C_ALI1535 is not set
++# CONFIG_I2C_ALI1563 is not set
++# CONFIG_I2C_ALI15X3 is not set
++# CONFIG_I2C_AMD756 is not set
++# CONFIG_I2C_AMD8111 is not set
++# CONFIG_I2C_I801 is not set
++# CONFIG_I2C_I810 is not set
++# CONFIG_I2C_PIIX4 is not set
++CONFIG_I2C_MPC=y
++# CONFIG_I2C_NFORCE2 is not set
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_PROSAVAGE is not set
++# CONFIG_I2C_SAVAGE4 is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_SIS5595 is not set
++# CONFIG_I2C_SIS630 is not set
++# CONFIG_I2C_SIS96X is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_TINY_USB is not set
++# CONFIG_I2C_VIA is not set
++# CONFIG_I2C_VIAPRO is not set
++# CONFIG_I2C_VOODOO3 is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++CONFIG_SPI=y
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_BITBANG=y
++CONFIG_SPI_MPC83xx=y
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_SENSORS_AD7418 is not set
++# CONFIG_SENSORS_ADM1021 is not set
++# CONFIG_SENSORS_ADM1025 is not set
++# CONFIG_SENSORS_ADM1026 is not set
++# CONFIG_SENSORS_ADM1029 is not set
++# CONFIG_SENSORS_ADM1031 is not set
++# CONFIG_SENSORS_ADM9240 is not set
++# CONFIG_SENSORS_ADT7470 is not set
++# CONFIG_SENSORS_ADT7473 is not set
++# CONFIG_SENSORS_ATXP1 is not set
++# CONFIG_SENSORS_DS1621 is not set
++# CONFIG_SENSORS_I5K_AMB is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_F71882FG is not set
++# CONFIG_SENSORS_F75375S is not set
++# CONFIG_SENSORS_GL518SM is not set
++# CONFIG_SENSORS_GL520SM is not set
++# CONFIG_SENSORS_IT87 is not set
++# CONFIG_SENSORS_LM63 is not set
++# CONFIG_SENSORS_LM70 is not set
++# CONFIG_SENSORS_LM75 is not set
++# CONFIG_SENSORS_LM77 is not set
++# CONFIG_SENSORS_LM78 is not set
++# CONFIG_SENSORS_LM80 is not set
++# CONFIG_SENSORS_LM83 is not set
++# CONFIG_SENSORS_LM85 is not set
++# CONFIG_SENSORS_LM87 is not set
++# CONFIG_SENSORS_LM90 is not set
++# CONFIG_SENSORS_LM92 is not set
++# CONFIG_SENSORS_LM93 is not set
++# CONFIG_SENSORS_MAX1619 is not set
++# CONFIG_SENSORS_MAX6650 is not set
++# CONFIG_SENSORS_PC87360 is not set
++# CONFIG_SENSORS_PC87427 is not set
++# CONFIG_SENSORS_SIS5595 is not set
++# CONFIG_SENSORS_DME1737 is not set
++# CONFIG_SENSORS_SMSC47M1 is not set
++# CONFIG_SENSORS_SMSC47M192 is not set
++# CONFIG_SENSORS_SMSC47B397 is not set
++# CONFIG_SENSORS_ADS7828 is not set
++# CONFIG_SENSORS_THMC50 is not set
++# CONFIG_SENSORS_VIA686A is not set
++# CONFIG_SENSORS_VT1211 is not set
++# CONFIG_SENSORS_VT8231 is not set
++# CONFIG_SENSORS_W83781D is not set
++# CONFIG_SENSORS_W83791D is not set
++# CONFIG_SENSORS_W83792D is not set
++# CONFIG_SENSORS_W83793 is not set
++# CONFIG_SENSORS_W83L785TS is not set
++# CONFIG_SENSORS_W83L786NG is not set
++# CONFIG_SENSORS_W83627HF is not set
++# CONFIG_SENSORS_W83627EHF is not set
++# CONFIG_HWMON_DEBUG_CHIP is not set
++# CONFIG_THERMAL is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_83xx_WDT=y
++
++#
++# PCI-based Watchdog Cards
++#
++# CONFIG_PCIPCWATCHDOG is not set
++# CONFIG_WDTPCI is not set
++
++#
++# USB-based Watchdog Cards
++#
++# CONFIG_USBPCWATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++# CONFIG_USB_DABUSB is not set
++
++#
++# Graphics support
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=m
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
++
++#
++# USB Input Devices
++#
++# CONFIG_USB_HID is not set
++
++#
++# USB HID Boot Protocol drivers
++#
++# CONFIG_USB_KBD is not set
++# CONFIG_USB_MOUSE is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
++
++#
++# Miscellaneous USB options
++#
++CONFIG_USB_DEVICEFS=y
++CONFIG_USB_DEVICE_CLASS=y
++# CONFIG_USB_DYNAMIC_MINORS is not set
++# CONFIG_USB_OTG is not set
++
++#
++# USB Host Controller Drivers
++#
++CONFIG_USB_EHCI_HCD=y
++# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
++# CONFIG_USB_EHCI_TT_NEWSCHED is not set
++# CONFIG_USB_EHCI_FSL is not set
++CONFIG_USB_EHCI_HCD_PPC_OF=y
++# CONFIG_USB_ISP116X_HCD is not set
++CONFIG_USB_OHCI_HCD=y
++CONFIG_USB_OHCI_HCD_PPC_OF=y
++CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
++# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
++CONFIG_USB_OHCI_HCD_PCI=y
++CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
++CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
++CONFIG_USB_OHCI_LITTLE_ENDIAN=y
++# CONFIG_USB_UHCI_HCD is not set
++# CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
++
++#
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++# CONFIG_USB_PRINTER is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# may also be needed; see USB_STORAGE Help for more information
++#
++CONFIG_USB_STORAGE=y
++# CONFIG_USB_STORAGE_DEBUG is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_ISD200 is not set
++# CONFIG_USB_STORAGE_DPCM is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++CONFIG_USB_MON=y
++
++#
++# USB port drivers
++#
++# CONFIG_USB_SERIAL is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_AUERSWALD is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_PHIDGET is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_SISUSBVGA is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++# CONFIG_USB_TEST is not set
++# CONFIG_USB_GADGET is not set
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++
++#
++# MMC/SD Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_BLOCK_BOUNCE=y
++# CONFIG_SDIO_UART is not set
++
++#
++# MMC/SD Host Controller Drivers
++#
++# CONFIG_MMC_SDHCI is not set
++# CONFIG_MMC_WBSD is not set
++# CONFIG_MMC_TIFM_SD is not set
++CONFIG_MMC_SPI=y
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++# CONFIG_RTC_CLASS is not set
++# CONFIG_DMADEVICES is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++CONFIG_NFS_V4=y
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++CONFIG_SUNRPC_GSS=y
++# CONFIG_SUNRPC_BIND34 is not set
++CONFIG_RPCSEC_GSS_KRB5=y
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++# CONFIG_MAC_PARTITION is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_BSD_DISKLABEL is not set
++# CONFIG_MINIX_SUBPARTITION is not set
++# CONFIG_SOLARIS_X86_PARTITION is not set
++# CONFIG_UNIXWARE_DISKLABEL is not set
++CONFIG_LDM_PARTITION=y
++# CONFIG_LDM_DEBUG is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++# CONFIG_NLS_CODEPAGE_850 is not set
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++CONFIG_NLS_CODEPAGE_932=y
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++CONFIG_NLS_ISO8859_8=y
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++# CONFIG_NLS_UTF8 is not set
++# CONFIG_DLM is not set
++CONFIG_UCC_FAST=y
++CONFIG_UCC=y
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++CONFIG_CRC_ITU_T=y
++CONFIG_CRC32=y
++CONFIG_CRC7=y
++# CONFIG_LIBCRC32C is not set
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_KERNEL is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++# CONFIG_CRYPTO_SEQIV is not set
++CONFIG_CRYPTO_MANAGER=y
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++CONFIG_CRYPTO_ECB=m
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=m
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_CRYPTO_DEV_HIFN_795X is not set
++# CONFIG_PPC_CLOCK is not set
++CONFIG_PPC_LIB_RHEAP=y
+--- /dev/null
++++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+@@ -0,0 +1,1295 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc6
++# Mon Mar 24 08:48:17 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++CONFIG_6xx=y
++# CONFIG_PPC_85xx is not set
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++# CONFIG_44x is not set
++# CONFIG_E200 is not set
++CONFIG_PPC_FPU=y
++# CONFIG_FSL_EMB_PERFMON is not set
++CONFIG_PPC_STD_MMU=y
++CONFIG_PPC_STD_MMU_32=y
++# CONFIG_PPC_MM_SLICES is not set
++# CONFIG_SMP is not set
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFAULT_UIMAGE=y
++# CONFIG_PPC_DCR_NATIVE is not set
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++# CONFIG_FAIR_GROUP_SCHED is not set
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++# CONFIG_KALLSYMS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++# CONFIG_EPOLL is not set
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++# CONFIG_KMOD is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++
++#
++# Platform support
++#
++# CONFIG_PPC_MULTIPLATFORM is not set
++# CONFIG_PPC_82xx is not set
++CONFIG_PPC_83xx=y
++# CONFIG_PPC_86xx is not set
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++CONFIG_MPC83xx=y
++# CONFIG_MPC831x_RDB is not set
++# CONFIG_MPC832x_MDS is not set
++# CONFIG_MPC832x_RDB is not set
++# CONFIG_MPC834x_MDS is not set
++CONFIG_MPC834x_ITX=y
++# CONFIG_MPC836x_MDS is not set
++# CONFIG_MPC837x_MDS is not set
++# CONFIG_MPC837x_RDB is not set
++# CONFIG_SBC834x is not set
++CONFIG_PPC_MPC834x=y
++CONFIG_IPIC=y
++# CONFIG_MPIC is not set
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++# CONFIG_FSL_ULI1575 is not set
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_PROC_DEVICETREE=y
++# CONFIG_CMDLINE_BOOL is not set
++# CONFIG_PM is not set
++CONFIG_SECCOMP=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_GENERIC_ISA_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_FSL_SOC=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++# CONFIG_PCIEPORTBUS is not set
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++CONFIG_PCI_LEGACY=y
++# CONFIG_PCCARD is not set
++# CONFIG_HOTPLUG_PCI is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_BOOT_LOAD=0x00800000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_FW_LOADER is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++# CONFIG_MTD_PARTITIONS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++# CONFIG_MTD_BLKDEVS is not set
++# CONFIG_MTD_BLOCK is not set
++# CONFIG_MTD_BLOCK_RO is not set
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PHYSMAP_START=0xfe000000
++CONFIG_MTD_PHYSMAP_LEN=0x1000000
++CONFIG_MTD_PHYSMAP_BANKWIDTH=2
++# CONFIG_MTD_PHYSMAP_OF is not set
++# CONFIG_MTD_INTEL_VR_NOR is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_PMC551 is not set
++# CONFIG_MTD_DATAFLASH is not set
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++# CONFIG_BLK_DEV_UB is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=32768
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_SGI_IOC4 is not set
++# CONFIG_TIFM_CORE is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++CONFIG_IDE=y
++CONFIG_IDE_MAX_HWIFS=4
++# CONFIG_BLK_DEV_IDE is not set
++# CONFIG_BLK_DEV_HD_ONLY is not set
++# CONFIG_BLK_DEV_HD is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++CONFIG_CHR_DEV_SG=y
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++CONFIG_SCSI_SPI_ATTRS=y
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
++# CONFIG_SCSI_3W_9XXX is not set
++# CONFIG_SCSI_ACARD is not set
++# CONFIG_SCSI_AACRAID is not set
++# CONFIG_SCSI_AIC7XXX is not set
++# CONFIG_SCSI_AIC7XXX_OLD is not set
++# CONFIG_SCSI_AIC79XX is not set
++# CONFIG_SCSI_AIC94XX is not set
++# CONFIG_SCSI_DPT_I2O is not set
++# CONFIG_SCSI_ADVANSYS is not set
++# CONFIG_SCSI_ARCMSR is not set
++# CONFIG_MEGARAID_NEWGEN is not set
++# CONFIG_MEGARAID_LEGACY is not set
++# CONFIG_MEGARAID_SAS is not set
++# CONFIG_SCSI_HPTIOP is not set
++# CONFIG_SCSI_BUSLOGIC is not set
++# CONFIG_SCSI_DMX3191D is not set
++# CONFIG_SCSI_EATA is not set
++# CONFIG_SCSI_FUTURE_DOMAIN is not set
++# CONFIG_SCSI_GDTH is not set
++# CONFIG_SCSI_IPS is not set
++# CONFIG_SCSI_INITIO is not set
++# CONFIG_SCSI_INIA100 is not set
++# CONFIG_SCSI_MVSAS is not set
++# CONFIG_SCSI_STEX is not set
++# CONFIG_SCSI_SYM53C8XX_2 is not set
++# CONFIG_SCSI_IPR is not set
++# CONFIG_SCSI_QLOGIC_1280 is not set
++# CONFIG_SCSI_QLA_FC is not set
++# CONFIG_SCSI_QLA_ISCSI is not set
++# CONFIG_SCSI_LPFC is not set
++# CONFIG_SCSI_DC395x is not set
++# CONFIG_SCSI_DC390T is not set
++# CONFIG_SCSI_NSP32 is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_SCSI_SRP is not set
++CONFIG_ATA=y
++# CONFIG_ATA_NONSTANDARD is not set
++# CONFIG_SATA_AHCI is not set
++# CONFIG_SATA_SVW is not set
++# CONFIG_ATA_PIIX is not set
++# CONFIG_SATA_MV is not set
++# CONFIG_SATA_NV is not set
++# CONFIG_PDC_ADMA is not set
++# CONFIG_SATA_QSTOR is not set
++# CONFIG_SATA_PROMISE is not set
++# CONFIG_SATA_SX4 is not set
++CONFIG_SATA_SIL=y
++# CONFIG_SATA_SIL24 is not set
++# CONFIG_SATA_SIS is not set
++# CONFIG_SATA_ULI is not set
++# CONFIG_SATA_VIA is not set
++# CONFIG_SATA_VITESSE is not set
++# CONFIG_SATA_INIC162X is not set
++# CONFIG_SATA_FSL is not set
++# CONFIG_PATA_ALI is not set
++# CONFIG_PATA_AMD is not set
++# CONFIG_PATA_ARTOP is not set
++# CONFIG_PATA_ATIIXP is not set
++# CONFIG_PATA_CMD640_PCI is not set
++# CONFIG_PATA_CMD64X is not set
++# CONFIG_PATA_CS5520 is not set
++# CONFIG_PATA_CS5530 is not set
++# CONFIG_PATA_CYPRESS is not set
++# CONFIG_PATA_EFAR is not set
++# CONFIG_ATA_GENERIC is not set
++# CONFIG_PATA_HPT366 is not set
++# CONFIG_PATA_HPT37X is not set
++# CONFIG_PATA_HPT3X2N is not set
++# CONFIG_PATA_HPT3X3 is not set
++# CONFIG_PATA_IT821X is not set
++# CONFIG_PATA_IT8213 is not set
++# CONFIG_PATA_JMICRON is not set
++# CONFIG_PATA_TRIFLEX is not set
++# CONFIG_PATA_MARVELL is not set
++# CONFIG_PATA_MPIIX is not set
++# CONFIG_PATA_OLDPIIX is not set
++# CONFIG_PATA_NETCELL is not set
++# CONFIG_PATA_NINJA32 is not set
++# CONFIG_PATA_NS87410 is not set
++# CONFIG_PATA_NS87415 is not set
++# CONFIG_PATA_OPTI is not set
++# CONFIG_PATA_OPTIDMA is not set
++# CONFIG_PATA_PDC_OLD is not set
++# CONFIG_PATA_RADISYS is not set
++# CONFIG_PATA_RZ1000 is not set
++# CONFIG_PATA_SC1200 is not set
++# CONFIG_PATA_SERVERWORKS is not set
++# CONFIG_PATA_PDC2027X is not set
++# CONFIG_PATA_SIL680 is not set
++# CONFIG_PATA_SIS is not set
++# CONFIG_PATA_VIA is not set
++# CONFIG_PATA_WINBOND is not set
++CONFIG_PATA_PLATFORM=y
++CONFIG_PATA_OF_PLATFORM=y
++CONFIG_MD=y
++CONFIG_BLK_DEV_MD=y
++CONFIG_MD_LINEAR=y
++CONFIG_MD_RAID0=y
++CONFIG_MD_RAID1=y
++# CONFIG_MD_RAID10 is not set
++# CONFIG_MD_RAID456 is not set
++# CONFIG_MD_MULTIPATH is not set
++# CONFIG_MD_FAULTY is not set
++# CONFIG_BLK_DEV_DM is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++CONFIG_CICADA_PHY=y
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++# CONFIG_NET_ETHERNET is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++# CONFIG_E1000 is not set
++# CONFIG_E1000E is not set
++# CONFIG_E1000E_ENABLED is not set
++# CONFIG_IP1000 is not set
++# CONFIG_IGB is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++# CONFIG_R8169 is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_VIA_VELOCITY is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++CONFIG_GIANFAR=y
++CONFIG_GFAR_NAPI=y
++# CONFIG_QLA3XXX is not set
++# CONFIG_ATL1 is not set
++CONFIG_NETDEV_10000=y
++# CONFIG_CHELSIO_T1 is not set
++# CONFIG_CHELSIO_T3 is not set
++# CONFIG_IXGBE is not set
++# CONFIG_IXGB is not set
++# CONFIG_S2IO is not set
++# CONFIG_MYRI10GE is not set
++# CONFIG_NETXEN_NIC is not set
++# CONFIG_NIU is not set
++# CONFIG_MLX4_CORE is not set
++# CONFIG_TEHUTI is not set
++# CONFIG_BNX2X is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NET_FC is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++# CONFIG_INPUT is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++# CONFIG_SERIAL_8250_PCI is not set
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++# CONFIG_SERIAL_8250_EXTENDED is not set
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_JSM is not set
++# CONFIG_SERIAL_OF_PLATFORM is not set
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++CONFIG_HW_RANDOM=y
++# CONFIG_NVRAM is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=y
++
++#
++# I2C Algorithms
++#
++# CONFIG_I2C_ALGOBIT is not set
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++# CONFIG_I2C_ALI1535 is not set
++# CONFIG_I2C_ALI1563 is not set
++# CONFIG_I2C_ALI15X3 is not set
++# CONFIG_I2C_AMD756 is not set
++# CONFIG_I2C_AMD8111 is not set
++# CONFIG_I2C_I801 is not set
++# CONFIG_I2C_I810 is not set
++# CONFIG_I2C_PIIX4 is not set
++CONFIG_I2C_MPC=y
++# CONFIG_I2C_NFORCE2 is not set
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_PROSAVAGE is not set
++# CONFIG_I2C_SAVAGE4 is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_SIS5595 is not set
++# CONFIG_I2C_SIS630 is not set
++# CONFIG_I2C_SIS96X is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_TINY_USB is not set
++# CONFIG_I2C_VIA is not set
++# CONFIG_I2C_VIAPRO is not set
++# CONFIG_I2C_VOODOO3 is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++CONFIG_SENSORS_PCF8574=y
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++CONFIG_SPI=y
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_BITBANG=y
++CONFIG_SPI_MPC83xx=y
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_83xx_WDT=y
++
++#
++# PCI-based Watchdog Cards
++#
++# CONFIG_PCIPCWATCHDOG is not set
++# CONFIG_WDTPCI is not set
++
++#
++# USB-based Watchdog Cards
++#
++# CONFIG_USBPCWATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++# CONFIG_USB_DABUSB is not set
++
++#
++# Graphics support
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=m
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
++
++#
++# Miscellaneous USB options
++#
++CONFIG_USB_DEVICEFS=y
++CONFIG_USB_DEVICE_CLASS=y
++# CONFIG_USB_DYNAMIC_MINORS is not set
++# CONFIG_USB_OTG is not set
++
++#
++# USB Host Controller Drivers
++#
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_EHCI_ROOT_HUB_TT=y
++# CONFIG_USB_EHCI_TT_NEWSCHED is not set
++CONFIG_USB_EHCI_FSL=y
++CONFIG_USB_EHCI_HCD_PPC_OF=y
++# CONFIG_USB_ISP116X_HCD is not set
++# CONFIG_USB_OHCI_HCD is not set
++CONFIG_USB_UHCI_HCD=y
++# CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
++
++#
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++# CONFIG_USB_PRINTER is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# may also be needed; see USB_STORAGE Help for more information
++#
++CONFIG_USB_STORAGE=y
++# CONFIG_USB_STORAGE_DEBUG is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_ISD200 is not set
++# CONFIG_USB_STORAGE_DPCM is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++CONFIG_USB_MON=y
++
++#
++# USB port drivers
++#
++# CONFIG_USB_SERIAL is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_AUERSWALD is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_PHIDGET is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_SISUSBVGA is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++# CONFIG_USB_TEST is not set
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++CONFIG_RTC_INTF_DEV_UIE_EMUL=y
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++CONFIG_RTC_DRV_DS1307=y
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++# CONFIG_RTC_DRV_S35390A is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_RTC_DRV_R9701 is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++# CONFIG_DMADEVICES is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_JFFS2_FS is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++CONFIG_NFS_V4=y
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++CONFIG_SUNRPC_GSS=y
++# CONFIG_SUNRPC_BIND34 is not set
++CONFIG_RPCSEC_GSS_KRB5=y
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++CONFIG_MAC_PARTITION=y
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_BSD_DISKLABEL is not set
++# CONFIG_MINIX_SUBPARTITION is not set
++# CONFIG_SOLARIS_X86_PARTITION is not set
++# CONFIG_UNIXWARE_DISKLABEL is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++# CONFIG_NLS_CODEPAGE_437 is not set
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++# CONFIG_NLS_CODEPAGE_850 is not set
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++# CONFIG_NLS_ISO8859_1 is not set
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++# CONFIG_NLS_UTF8 is not set
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_KERNEL is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++# CONFIG_CRYPTO_SEQIV is not set
++CONFIG_CRYPTO_MANAGER=y
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=m
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_CRYPTO_DEV_HIFN_795X is not set
++# CONFIG_PPC_CLOCK is not set
+--- /dev/null
++++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
+@@ -0,0 +1,1222 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc6
++# Mon Mar 24 08:48:18 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++CONFIG_6xx=y
++# CONFIG_PPC_85xx is not set
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++# CONFIG_44x is not set
++# CONFIG_E200 is not set
++CONFIG_PPC_FPU=y
++# CONFIG_FSL_EMB_PERFMON is not set
++CONFIG_PPC_STD_MMU=y
++CONFIG_PPC_STD_MMU_32=y
++# CONFIG_PPC_MM_SLICES is not set
++# CONFIG_SMP is not set
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFAULT_UIMAGE=y
++# CONFIG_PPC_DCR_NATIVE is not set
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++# CONFIG_FAIR_GROUP_SCHED is not set
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++# CONFIG_KALLSYMS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++# CONFIG_EPOLL is not set
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++# CONFIG_KMOD is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++
++#
++# Platform support
++#
++# CONFIG_PPC_MULTIPLATFORM is not set
++# CONFIG_PPC_82xx is not set
++CONFIG_PPC_83xx=y
++# CONFIG_PPC_86xx is not set
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++CONFIG_MPC83xx=y
++# CONFIG_MPC831x_RDB is not set
++# CONFIG_MPC832x_MDS is not set
++# CONFIG_MPC832x_RDB is not set
++# CONFIG_MPC834x_MDS is not set
++CONFIG_MPC834x_ITX=y
++# CONFIG_MPC836x_MDS is not set
++# CONFIG_MPC837x_MDS is not set
++# CONFIG_MPC837x_RDB is not set
++# CONFIG_SBC834x is not set
++CONFIG_PPC_MPC834x=y
++CONFIG_IPIC=y
++# CONFIG_MPIC is not set
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++# CONFIG_FSL_ULI1575 is not set
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_PROC_DEVICETREE=y
++# CONFIG_CMDLINE_BOOL is not set
++# CONFIG_PM is not set
++CONFIG_SECCOMP=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_GENERIC_ISA_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_FSL_SOC=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++# CONFIG_PCIEPORTBUS is not set
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++CONFIG_PCI_LEGACY=y
++# CONFIG_PCCARD is not set
++# CONFIG_HOTPLUG_PCI is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_BOOT_LOAD=0x00800000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_FW_LOADER is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++# CONFIG_MTD_PARTITIONS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++# CONFIG_MTD_BLKDEVS is not set
++# CONFIG_MTD_BLOCK is not set
++# CONFIG_MTD_BLOCK_RO is not set
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PHYSMAP_START=0xfe000000
++CONFIG_MTD_PHYSMAP_LEN=0x800000
++CONFIG_MTD_PHYSMAP_BANKWIDTH=2
++# CONFIG_MTD_PHYSMAP_OF is not set
++# CONFIG_MTD_INTEL_VR_NOR is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_PMC551 is not set
++# CONFIG_MTD_DATAFLASH is not set
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++# CONFIG_BLK_DEV_UB is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=32768
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_SGI_IOC4 is not set
++# CONFIG_TIFM_CORE is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++CONFIG_CHR_DEV_SG=y
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++CONFIG_SCSI_SPI_ATTRS=y
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
++# CONFIG_SCSI_3W_9XXX is not set
++# CONFIG_SCSI_ACARD is not set
++# CONFIG_SCSI_AACRAID is not set
++# CONFIG_SCSI_AIC7XXX is not set
++# CONFIG_SCSI_AIC7XXX_OLD is not set
++# CONFIG_SCSI_AIC79XX is not set
++# CONFIG_SCSI_AIC94XX is not set
++# CONFIG_SCSI_DPT_I2O is not set
++# CONFIG_SCSI_ADVANSYS is not set
++# CONFIG_SCSI_ARCMSR is not set
++# CONFIG_MEGARAID_NEWGEN is not set
++# CONFIG_MEGARAID_LEGACY is not set
++# CONFIG_MEGARAID_SAS is not set
++# CONFIG_SCSI_HPTIOP is not set
++# CONFIG_SCSI_BUSLOGIC is not set
++# CONFIG_SCSI_DMX3191D is not set
++# CONFIG_SCSI_EATA is not set
++# CONFIG_SCSI_FUTURE_DOMAIN is not set
++# CONFIG_SCSI_GDTH is not set
++# CONFIG_SCSI_IPS is not set
++# CONFIG_SCSI_INITIO is not set
++# CONFIG_SCSI_INIA100 is not set
++# CONFIG_SCSI_MVSAS is not set
++# CONFIG_SCSI_STEX is not set
++# CONFIG_SCSI_SYM53C8XX_2 is not set
++# CONFIG_SCSI_QLOGIC_1280 is not set
++# CONFIG_SCSI_QLA_FC is not set
++# CONFIG_SCSI_QLA_ISCSI is not set
++# CONFIG_SCSI_LPFC is not set
++# CONFIG_SCSI_DC395x is not set
++# CONFIG_SCSI_DC390T is not set
++# CONFIG_SCSI_NSP32 is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_SCSI_SRP is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++CONFIG_CICADA_PHY=y
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++# CONFIG_NET_ETHERNET is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++# CONFIG_E1000 is not set
++# CONFIG_E1000E is not set
++# CONFIG_E1000E_ENABLED is not set
++# CONFIG_IP1000 is not set
++# CONFIG_IGB is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++# CONFIG_R8169 is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_VIA_VELOCITY is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++CONFIG_GIANFAR=y
++CONFIG_GFAR_NAPI=y
++# CONFIG_QLA3XXX is not set
++# CONFIG_ATL1 is not set
++CONFIG_NETDEV_10000=y
++# CONFIG_CHELSIO_T1 is not set
++# CONFIG_CHELSIO_T3 is not set
++# CONFIG_IXGBE is not set
++# CONFIG_IXGB is not set
++# CONFIG_S2IO is not set
++# CONFIG_MYRI10GE is not set
++# CONFIG_NETXEN_NIC is not set
++# CONFIG_NIU is not set
++# CONFIG_MLX4_CORE is not set
++# CONFIG_TEHUTI is not set
++# CONFIG_BNX2X is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NET_FC is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++# CONFIG_INPUT is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++# CONFIG_SERIAL_8250_PCI is not set
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++# CONFIG_SERIAL_8250_EXTENDED is not set
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_JSM is not set
++# CONFIG_SERIAL_OF_PLATFORM is not set
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++CONFIG_HW_RANDOM=y
++# CONFIG_NVRAM is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=y
++
++#
++# I2C Algorithms
++#
++# CONFIG_I2C_ALGOBIT is not set
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++# CONFIG_I2C_ALI1535 is not set
++# CONFIG_I2C_ALI1563 is not set
++# CONFIG_I2C_ALI15X3 is not set
++# CONFIG_I2C_AMD756 is not set
++# CONFIG_I2C_AMD8111 is not set
++# CONFIG_I2C_I801 is not set
++# CONFIG_I2C_I810 is not set
++# CONFIG_I2C_PIIX4 is not set
++CONFIG_I2C_MPC=y
++# CONFIG_I2C_NFORCE2 is not set
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_PROSAVAGE is not set
++# CONFIG_I2C_SAVAGE4 is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_SIS5595 is not set
++# CONFIG_I2C_SIS630 is not set
++# CONFIG_I2C_SIS96X is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_TINY_USB is not set
++# CONFIG_I2C_VIA is not set
++# CONFIG_I2C_VIAPRO is not set
++# CONFIG_I2C_VOODOO3 is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++CONFIG_SENSORS_PCF8574=y
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++CONFIG_SPI=y
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++CONFIG_SPI_BITBANG=y
++CONFIG_SPI_MPC83xx=y
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_AT25 is not set
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_83xx_WDT=y
++
++#
++# PCI-based Watchdog Cards
++#
++# CONFIG_PCIPCWATCHDOG is not set
++# CONFIG_WDTPCI is not set
++
++#
++# USB-based Watchdog Cards
++#
++# CONFIG_USBPCWATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++# CONFIG_USB_DABUSB is not set
++
++#
++# Graphics support
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=m
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
++
++#
++# Miscellaneous USB options
++#
++# CONFIG_USB_DEVICEFS is not set
++CONFIG_USB_DEVICE_CLASS=y
++# CONFIG_USB_DYNAMIC_MINORS is not set
++# CONFIG_USB_OTG is not set
++
++#
++# USB Host Controller Drivers
++#
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_EHCI_ROOT_HUB_TT=y
++# CONFIG_USB_EHCI_TT_NEWSCHED is not set
++CONFIG_USB_EHCI_FSL=y
++CONFIG_USB_EHCI_HCD_PPC_OF=y
++# CONFIG_USB_ISP116X_HCD is not set
++# CONFIG_USB_OHCI_HCD is not set
++CONFIG_USB_UHCI_HCD=y
++# CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
++
++#
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++# CONFIG_USB_PRINTER is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# may also be needed; see USB_STORAGE Help for more information
++#
++CONFIG_USB_STORAGE=y
++# CONFIG_USB_STORAGE_DEBUG is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_ISD200 is not set
++# CONFIG_USB_STORAGE_DPCM is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++CONFIG_USB_MON=y
++
++#
++# USB port drivers
++#
++# CONFIG_USB_SERIAL is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_AUERSWALD is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_PHIDGET is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_SISUSBVGA is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++CONFIG_RTC_INTF_DEV_UIE_EMUL=y
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++CONFIG_RTC_DRV_DS1307=y
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++# CONFIG_RTC_DRV_S35390A is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_RTC_DRV_R9701 is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++# CONFIG_DMADEVICES is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_JFFS2_FS is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++CONFIG_NFS_V4=y
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++CONFIG_SUNRPC_GSS=y
++# CONFIG_SUNRPC_BIND34 is not set
++CONFIG_RPCSEC_GSS_KRB5=y
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++CONFIG_MAC_PARTITION=y
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_BSD_DISKLABEL is not set
++# CONFIG_MINIX_SUBPARTITION is not set
++# CONFIG_SOLARIS_X86_PARTITION is not set
++# CONFIG_UNIXWARE_DISKLABEL is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++# CONFIG_NLS_CODEPAGE_437 is not set
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++# CONFIG_NLS_CODEPAGE_850 is not set
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++# CONFIG_NLS_ISO8859_1 is not set
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++# CONFIG_NLS_UTF8 is not set
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_KERNEL is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++# CONFIG_CRYPTO_SEQIV is not set
++CONFIG_CRYPTO_MANAGER=y
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=m
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_CRYPTO_DEV_HIFN_795X is not set
++# CONFIG_PPC_CLOCK is not set
+--- /dev/null
++++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
+@@ -0,0 +1,1021 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc7
++# Mon Mar 31 11:36:56 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++CONFIG_6xx=y
++# CONFIG_PPC_85xx is not set
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++# CONFIG_44x is not set
++# CONFIG_E200 is not set
++CONFIG_PPC_FPU=y
++# CONFIG_FSL_EMB_PERFMON is not set
++CONFIG_PPC_STD_MMU=y
++CONFIG_PPC_STD_MMU_32=y
++# CONFIG_PPC_MM_SLICES is not set
++# CONFIG_SMP is not set
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFAULT_UIMAGE=y
++# CONFIG_PPC_DCR_NATIVE is not set
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++# CONFIG_FAIR_GROUP_SCHED is not set
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++# CONFIG_KALLSYMS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++# CONFIG_EPOLL is not set
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++# CONFIG_KMOD is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++
++#
++# Platform support
++#
++# CONFIG_PPC_MULTIPLATFORM is not set
++# CONFIG_PPC_82xx is not set
++CONFIG_PPC_83xx=y
++# CONFIG_PPC_86xx is not set
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++CONFIG_MPC83xx=y
++# CONFIG_MPC831x_RDB is not set
++# CONFIG_MPC832x_MDS is not set
++# CONFIG_MPC832x_RDB is not set
++CONFIG_MPC834x_MDS=y
++# CONFIG_MPC834x_ITX is not set
++# CONFIG_MPC836x_MDS is not set
++# CONFIG_MPC837x_MDS is not set
++# CONFIG_MPC837x_RDB is not set
++# CONFIG_SBC834x is not set
++CONFIG_PPC_MPC834x=y
++CONFIG_IPIC=y
++# CONFIG_MPIC is not set
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++# CONFIG_FSL_ULI1575 is not set
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_PROC_DEVICETREE=y
++# CONFIG_CMDLINE_BOOL is not set
++# CONFIG_PM is not set
++CONFIG_SECCOMP=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_GENERIC_ISA_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_FSL_SOC=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++# CONFIG_PCIEPORTBUS is not set
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++CONFIG_PCI_LEGACY=y
++# CONFIG_PCCARD is not set
++# CONFIG_HOTPLUG_PCI is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_BOOT_LOAD=0x00800000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++CONFIG_XFRM_USER=m
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_FW_LOADER is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++# CONFIG_MTD is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=32768
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_SGI_IOC4 is not set
++# CONFIG_TIFM_CORE is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++CONFIG_MARVELL_PHY=y
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++CONFIG_NET_PCI=y
++# CONFIG_PCNET32 is not set
++# CONFIG_AMD8111_ETH is not set
++# CONFIG_ADAPTEC_STARFIRE is not set
++# CONFIG_B44 is not set
++# CONFIG_FORCEDETH is not set
++# CONFIG_EEPRO100 is not set
++CONFIG_E100=y
++# CONFIG_FEALNX is not set
++# CONFIG_NATSEMI is not set
++# CONFIG_NE2K_PCI is not set
++# CONFIG_8139CP is not set
++# CONFIG_8139TOO is not set
++# CONFIG_R6040 is not set
++# CONFIG_SIS900 is not set
++# CONFIG_EPIC100 is not set
++# CONFIG_SUNDANCE is not set
++# CONFIG_TLAN is not set
++# CONFIG_VIA_RHINE is not set
++# CONFIG_SC92031 is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++# CONFIG_E1000 is not set
++# CONFIG_E1000E is not set
++# CONFIG_E1000E_ENABLED is not set
++# CONFIG_IP1000 is not set
++# CONFIG_IGB is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++# CONFIG_R8169 is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_VIA_VELOCITY is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++CONFIG_GIANFAR=y
++# CONFIG_GFAR_NAPI is not set
++# CONFIG_QLA3XXX is not set
++# CONFIG_ATL1 is not set
++CONFIG_NETDEV_10000=y
++# CONFIG_CHELSIO_T1 is not set
++# CONFIG_CHELSIO_T3 is not set
++# CONFIG_IXGBE is not set
++# CONFIG_IXGB is not set
++# CONFIG_S2IO is not set
++# CONFIG_MYRI10GE is not set
++# CONFIG_NETXEN_NIC is not set
++# CONFIG_NIU is not set
++# CONFIG_MLX4_CORE is not set
++# CONFIG_TEHUTI is not set
++# CONFIG_BNX2X is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_PCI=y
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++# CONFIG_SERIAL_8250_EXTENDED is not set
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_JSM is not set
++# CONFIG_SERIAL_OF_PLATFORM is not set
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_NVRAM is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=y
++
++#
++# I2C Algorithms
++#
++# CONFIG_I2C_ALGOBIT is not set
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++# CONFIG_I2C_ALI1535 is not set
++# CONFIG_I2C_ALI1563 is not set
++# CONFIG_I2C_ALI15X3 is not set
++# CONFIG_I2C_AMD756 is not set
++# CONFIG_I2C_AMD8111 is not set
++# CONFIG_I2C_I801 is not set
++# CONFIG_I2C_I810 is not set
++# CONFIG_I2C_PIIX4 is not set
++CONFIG_I2C_MPC=y
++# CONFIG_I2C_NFORCE2 is not set
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_PROSAVAGE is not set
++# CONFIG_I2C_SAVAGE4 is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_SIS5595 is not set
++# CONFIG_I2C_SIS630 is not set
++# CONFIG_I2C_SIS96X is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_VIA is not set
++# CONFIG_I2C_VIAPRO is not set
++# CONFIG_I2C_VOODOO3 is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_SENSORS_AD7418 is not set
++# CONFIG_SENSORS_ADM1021 is not set
++# CONFIG_SENSORS_ADM1025 is not set
++# CONFIG_SENSORS_ADM1026 is not set
++# CONFIG_SENSORS_ADM1029 is not set
++# CONFIG_SENSORS_ADM1031 is not set
++# CONFIG_SENSORS_ADM9240 is not set
++# CONFIG_SENSORS_ADT7470 is not set
++# CONFIG_SENSORS_ADT7473 is not set
++# CONFIG_SENSORS_ATXP1 is not set
++# CONFIG_SENSORS_DS1621 is not set
++# CONFIG_SENSORS_I5K_AMB is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_F71882FG is not set
++# CONFIG_SENSORS_F75375S is not set
++# CONFIG_SENSORS_GL518SM is not set
++# CONFIG_SENSORS_GL520SM is not set
++# CONFIG_SENSORS_IT87 is not set
++# CONFIG_SENSORS_LM63 is not set
++# CONFIG_SENSORS_LM75 is not set
++# CONFIG_SENSORS_LM77 is not set
++# CONFIG_SENSORS_LM78 is not set
++# CONFIG_SENSORS_LM80 is not set
++# CONFIG_SENSORS_LM83 is not set
++# CONFIG_SENSORS_LM85 is not set
++# CONFIG_SENSORS_LM87 is not set
++# CONFIG_SENSORS_LM90 is not set
++# CONFIG_SENSORS_LM92 is not set
++# CONFIG_SENSORS_LM93 is not set
++# CONFIG_SENSORS_MAX1619 is not set
++# CONFIG_SENSORS_MAX6650 is not set
++# CONFIG_SENSORS_PC87360 is not set
++# CONFIG_SENSORS_PC87427 is not set
++# CONFIG_SENSORS_SIS5595 is not set
++# CONFIG_SENSORS_DME1737 is not set
++# CONFIG_SENSORS_SMSC47M1 is not set
++# CONFIG_SENSORS_SMSC47M192 is not set
++# CONFIG_SENSORS_SMSC47B397 is not set
++# CONFIG_SENSORS_ADS7828 is not set
++# CONFIG_SENSORS_THMC50 is not set
++# CONFIG_SENSORS_VIA686A is not set
++# CONFIG_SENSORS_VT1211 is not set
++# CONFIG_SENSORS_VT8231 is not set
++# CONFIG_SENSORS_W83781D is not set
++# CONFIG_SENSORS_W83791D is not set
++# CONFIG_SENSORS_W83792D is not set
++# CONFIG_SENSORS_W83793 is not set
++# CONFIG_SENSORS_W83L785TS is not set
++# CONFIG_SENSORS_W83L786NG is not set
++# CONFIG_SENSORS_W83627HF is not set
++# CONFIG_SENSORS_W83627EHF is not set
++# CONFIG_HWMON_DEBUG_CHIP is not set
++# CONFIG_THERMAL is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_83xx_WDT=y
++
++#
++# PCI-based Watchdog Cards
++#
++# CONFIG_PCIPCWATCHDOG is not set
++# CONFIG_WDTPCI is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++
++#
++# Graphics support
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=m
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++# CONFIG_USB is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++CONFIG_RTC_DRV_DS1374=y
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++# CONFIG_RTC_DRV_S35390A is not set
++
++#
++# SPI RTC drivers
++#
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++# CONFIG_DMADEVICES is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++CONFIG_NFS_V4=y
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++CONFIG_SUNRPC_GSS=y
++# CONFIG_SUNRPC_BIND34 is not set
++CONFIG_RPCSEC_GSS_KRB5=y
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++# CONFIG_MAC_PARTITION is not set
++# CONFIG_MSDOS_PARTITION is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_KERNEL is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++# CONFIG_CRYPTO_SEQIV is not set
++CONFIG_CRYPTO_MANAGER=y
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++CONFIG_CRYPTO_ECB=m
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=m
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_CRYPTO_DEV_HIFN_795X is not set
++# CONFIG_PPC_CLOCK is not set
+--- /dev/null
++++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
+@@ -0,0 +1,1079 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc7
++# Mon Mar 31 11:36:57 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++CONFIG_6xx=y
++# CONFIG_PPC_85xx is not set
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++# CONFIG_44x is not set
++# CONFIG_E200 is not set
++CONFIG_PPC_FPU=y
++# CONFIG_FSL_EMB_PERFMON is not set
++CONFIG_PPC_STD_MMU=y
++CONFIG_PPC_STD_MMU_32=y
++# CONFIG_PPC_MM_SLICES is not set
++# CONFIG_SMP is not set
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFAULT_UIMAGE=y
++# CONFIG_PPC_DCR_NATIVE is not set
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++# CONFIG_FAIR_GROUP_SCHED is not set
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++# CONFIG_KALLSYMS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++# CONFIG_EPOLL is not set
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++# CONFIG_KMOD is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++
++#
++# Platform support
++#
++# CONFIG_PPC_MULTIPLATFORM is not set
++# CONFIG_PPC_82xx is not set
++CONFIG_PPC_83xx=y
++# CONFIG_PPC_86xx is not set
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++CONFIG_MPC83xx=y
++# CONFIG_MPC831x_RDB is not set
++# CONFIG_MPC832x_MDS is not set
++# CONFIG_MPC832x_RDB is not set
++# CONFIG_MPC834x_MDS is not set
++# CONFIG_MPC834x_ITX is not set
++CONFIG_MPC836x_MDS=y
++# CONFIG_MPC837x_MDS is not set
++# CONFIG_MPC837x_RDB is not set
++# CONFIG_SBC834x is not set
++CONFIG_IPIC=y
++# CONFIG_MPIC is not set
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++CONFIG_QUICC_ENGINE=y
++# CONFIG_FSL_ULI1575 is not set
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_PROC_DEVICETREE=y
++# CONFIG_CMDLINE_BOOL is not set
++# CONFIG_PM is not set
++CONFIG_SECCOMP=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_GENERIC_ISA_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_FSL_SOC=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++# CONFIG_PCIEPORTBUS is not set
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++CONFIG_PCI_LEGACY=y
++# CONFIG_PCCARD is not set
++# CONFIG_HOTPLUG_PCI is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_BOOT_LOAD=0x00800000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_FW_LOADER is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++# CONFIG_MTD is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=32768
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_SGI_IOC4 is not set
++# CONFIG_TIFM_CORE is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++# CONFIG_BLK_DEV_SD is not set
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
++# CONFIG_SCSI_3W_9XXX is not set
++# CONFIG_SCSI_ACARD is not set
++# CONFIG_SCSI_AACRAID is not set
++# CONFIG_SCSI_AIC7XXX is not set
++# CONFIG_SCSI_AIC7XXX_OLD is not set
++# CONFIG_SCSI_AIC79XX is not set
++# CONFIG_SCSI_AIC94XX is not set
++# CONFIG_SCSI_DPT_I2O is not set
++# CONFIG_SCSI_ADVANSYS is not set
++# CONFIG_SCSI_ARCMSR is not set
++# CONFIG_MEGARAID_NEWGEN is not set
++# CONFIG_MEGARAID_LEGACY is not set
++# CONFIG_MEGARAID_SAS is not set
++# CONFIG_SCSI_HPTIOP is not set
++# CONFIG_SCSI_BUSLOGIC is not set
++# CONFIG_SCSI_DMX3191D is not set
++# CONFIG_SCSI_EATA is not set
++# CONFIG_SCSI_FUTURE_DOMAIN is not set
++# CONFIG_SCSI_GDTH is not set
++# CONFIG_SCSI_IPS is not set
++# CONFIG_SCSI_INITIO is not set
++# CONFIG_SCSI_INIA100 is not set
++# CONFIG_SCSI_MVSAS is not set
++# CONFIG_SCSI_STEX is not set
++# CONFIG_SCSI_SYM53C8XX_2 is not set
++# CONFIG_SCSI_QLOGIC_1280 is not set
++# CONFIG_SCSI_QLA_FC is not set
++# CONFIG_SCSI_QLA_ISCSI is not set
++# CONFIG_SCSI_LPFC is not set
++# CONFIG_SCSI_DC395x is not set
++# CONFIG_SCSI_DC390T is not set
++# CONFIG_SCSI_NSP32 is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_SCSI_SRP is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++CONFIG_MARVELL_PHY=y
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_NET_PCI is not set
++# CONFIG_B44 is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++# CONFIG_E1000 is not set
++# CONFIG_E1000E is not set
++# CONFIG_E1000E_ENABLED is not set
++# CONFIG_IP1000 is not set
++# CONFIG_IGB is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++# CONFIG_R8169 is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_VIA_VELOCITY is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++# CONFIG_GIANFAR is not set
++CONFIG_UCC_GETH=y
++# CONFIG_UGETH_NAPI is not set
++# CONFIG_UGETH_MAGIC_PACKET is not set
++# CONFIG_UGETH_FILTERING is not set
++# CONFIG_UGETH_TX_ON_DEMAND is not set
++# CONFIG_QLA3XXX is not set
++# CONFIG_ATL1 is not set
++CONFIG_NETDEV_10000=y
++# CONFIG_CHELSIO_T1 is not set
++# CONFIG_CHELSIO_T3 is not set
++# CONFIG_IXGBE is not set
++# CONFIG_IXGB is not set
++# CONFIG_S2IO is not set
++# CONFIG_MYRI10GE is not set
++# CONFIG_NETXEN_NIC is not set
++# CONFIG_NIU is not set
++# CONFIG_MLX4_CORE is not set
++# CONFIG_TEHUTI is not set
++# CONFIG_BNX2X is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NET_FC is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_PCI=y
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++# CONFIG_SERIAL_8250_EXTENDED is not set
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_JSM is not set
++# CONFIG_SERIAL_OF_PLATFORM is not set
++# CONFIG_SERIAL_QE is not set
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++CONFIG_HW_RANDOM=y
++# CONFIG_NVRAM is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=y
++
++#
++# I2C Algorithms
++#
++# CONFIG_I2C_ALGOBIT is not set
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++# CONFIG_I2C_ALI1535 is not set
++# CONFIG_I2C_ALI1563 is not set
++# CONFIG_I2C_ALI15X3 is not set
++# CONFIG_I2C_AMD756 is not set
++# CONFIG_I2C_AMD8111 is not set
++# CONFIG_I2C_I801 is not set
++# CONFIG_I2C_I810 is not set
++# CONFIG_I2C_PIIX4 is not set
++CONFIG_I2C_MPC=y
++# CONFIG_I2C_NFORCE2 is not set
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_PROSAVAGE is not set
++# CONFIG_I2C_SAVAGE4 is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_SIS5595 is not set
++# CONFIG_I2C_SIS630 is not set
++# CONFIG_I2C_SIS96X is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_VIA is not set
++# CONFIG_I2C_VIAPRO is not set
++# CONFIG_I2C_VOODOO3 is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_SENSORS_AD7418 is not set
++# CONFIG_SENSORS_ADM1021 is not set
++# CONFIG_SENSORS_ADM1025 is not set
++# CONFIG_SENSORS_ADM1026 is not set
++# CONFIG_SENSORS_ADM1029 is not set
++# CONFIG_SENSORS_ADM1031 is not set
++# CONFIG_SENSORS_ADM9240 is not set
++# CONFIG_SENSORS_ADT7470 is not set
++# CONFIG_SENSORS_ADT7473 is not set
++# CONFIG_SENSORS_ATXP1 is not set
++# CONFIG_SENSORS_DS1621 is not set
++# CONFIG_SENSORS_I5K_AMB is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_F71882FG is not set
++# CONFIG_SENSORS_F75375S is not set
++# CONFIG_SENSORS_GL518SM is not set
++# CONFIG_SENSORS_GL520SM is not set
++# CONFIG_SENSORS_IT87 is not set
++# CONFIG_SENSORS_LM63 is not set
++# CONFIG_SENSORS_LM75 is not set
++# CONFIG_SENSORS_LM77 is not set
++# CONFIG_SENSORS_LM78 is not set
++# CONFIG_SENSORS_LM80 is not set
++# CONFIG_SENSORS_LM83 is not set
++# CONFIG_SENSORS_LM85 is not set
++# CONFIG_SENSORS_LM87 is not set
++# CONFIG_SENSORS_LM90 is not set
++# CONFIG_SENSORS_LM92 is not set
++# CONFIG_SENSORS_LM93 is not set
++# CONFIG_SENSORS_MAX1619 is not set
++# CONFIG_SENSORS_MAX6650 is not set
++# CONFIG_SENSORS_PC87360 is not set
++# CONFIG_SENSORS_PC87427 is not set
++# CONFIG_SENSORS_SIS5595 is not set
++# CONFIG_SENSORS_DME1737 is not set
++# CONFIG_SENSORS_SMSC47M1 is not set
++# CONFIG_SENSORS_SMSC47M192 is not set
++# CONFIG_SENSORS_SMSC47B397 is not set
++# CONFIG_SENSORS_ADS7828 is not set
++# CONFIG_SENSORS_THMC50 is not set
++# CONFIG_SENSORS_VIA686A is not set
++# CONFIG_SENSORS_VT1211 is not set
++# CONFIG_SENSORS_VT8231 is not set
++# CONFIG_SENSORS_W83781D is not set
++# CONFIG_SENSORS_W83791D is not set
++# CONFIG_SENSORS_W83792D is not set
++# CONFIG_SENSORS_W83793 is not set
++# CONFIG_SENSORS_W83L785TS is not set
++# CONFIG_SENSORS_W83L786NG is not set
++# CONFIG_SENSORS_W83627HF is not set
++# CONFIG_SENSORS_W83627EHF is not set
++# CONFIG_HWMON_DEBUG_CHIP is not set
++# CONFIG_THERMAL is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_83xx_WDT=y
++
++#
++# PCI-based Watchdog Cards
++#
++# CONFIG_PCIPCWATCHDOG is not set
++# CONFIG_WDTPCI is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++
++#
++# Graphics support
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=m
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++# CONFIG_USB is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++CONFIG_RTC_DRV_DS1374=y
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++# CONFIG_RTC_DRV_S35390A is not set
++
++#
++# SPI RTC drivers
++#
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++# CONFIG_DMADEVICES is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++CONFIG_NFS_V4=y
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++CONFIG_SUNRPC_GSS=y
++# CONFIG_SUNRPC_BIND34 is not set
++CONFIG_RPCSEC_GSS_KRB5=y
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++# CONFIG_MAC_PARTITION is not set
++# CONFIG_MSDOS_PARTITION is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++CONFIG_UCC_FAST=y
++CONFIG_UCC=y
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_KERNEL is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++# CONFIG_CRYPTO_SEQIV is not set
++CONFIG_CRYPTO_MANAGER=y
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++CONFIG_CRYPTO_ECB=m
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=m
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_CRYPTO_DEV_HIFN_795X is not set
++# CONFIG_PPC_CLOCK is not set
++CONFIG_PPC_LIB_RHEAP=y
+--- /dev/null
++++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
+@@ -0,0 +1,899 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc6
++# Mon Mar 24 08:48:23 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++CONFIG_6xx=y
++# CONFIG_PPC_85xx is not set
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++# CONFIG_44x is not set
++# CONFIG_E200 is not set
++CONFIG_PPC_FPU=y
++# CONFIG_FSL_EMB_PERFMON is not set
++CONFIG_PPC_STD_MMU=y
++CONFIG_PPC_STD_MMU_32=y
++# CONFIG_PPC_MM_SLICES is not set
++# CONFIG_SMP is not set
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFAULT_UIMAGE=y
++# CONFIG_PPC_DCR_NATIVE is not set
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++CONFIG_FAIR_GROUP_SCHED=y
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++# CONFIG_EPOLL is not set
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++# CONFIG_KMOD is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++
++#
++# Platform support
++#
++# CONFIG_PPC_MULTIPLATFORM is not set
++# CONFIG_PPC_82xx is not set
++CONFIG_PPC_83xx=y
++# CONFIG_PPC_86xx is not set
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++CONFIG_MPC83xx=y
++# CONFIG_MPC831x_RDB is not set
++# CONFIG_MPC832x_MDS is not set
++# CONFIG_MPC832x_RDB is not set
++# CONFIG_MPC834x_MDS is not set
++# CONFIG_MPC834x_ITX is not set
++# CONFIG_MPC836x_MDS is not set
++CONFIG_MPC837x_MDS=y
++# CONFIG_MPC837x_RDB is not set
++# CONFIG_SBC834x is not set
++CONFIG_PPC_MPC837x=y
++CONFIG_IPIC=y
++# CONFIG_MPIC is not set
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++# CONFIG_FSL_ULI1575 is not set
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++# CONFIG_TICK_ONESHOT is not set
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_PROC_DEVICETREE=y
++# CONFIG_CMDLINE_BOOL is not set
++# CONFIG_PM is not set
++CONFIG_SECCOMP=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_GENERIC_ISA_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_FSL_SOC=y
++# CONFIG_PCI is not set
++# CONFIG_PCI_DOMAINS is not set
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_BOOT_LOAD=0x00800000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++CONFIG_XFRM_USER=m
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_FW_LOADER is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++# CONFIG_MTD is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=32768
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++CONFIG_CHR_DEV_SG=y
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_SCSI_DEBUG is not set
++CONFIG_ATA=y
++# CONFIG_ATA_NONSTANDARD is not set
++# CONFIG_SATA_MV is not set
++CONFIG_SATA_FSL=y
++# CONFIG_PATA_PLATFORM is not set
++# CONFIG_MD is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++CONFIG_MARVELL_PHY=y
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_B44 is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_E1000E_ENABLED is not set
++CONFIG_GIANFAR=y
++# CONFIG_GFAR_NAPI is not set
++CONFIG_NETDEV_10000=y
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++# CONFIG_SERIAL_8250_EXTENDED is not set
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_OF_PLATFORM is not set
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_NVRAM is not set
++CONFIG_GEN_RTC=y
++# CONFIG_GEN_RTC_X is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=y
++
++#
++# I2C Algorithms
++#
++# CONFIG_I2C_ALGOBIT is not set
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++CONFIG_I2C_MPC=y
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_SENSORS_AD7418 is not set
++# CONFIG_SENSORS_ADM1021 is not set
++# CONFIG_SENSORS_ADM1025 is not set
++# CONFIG_SENSORS_ADM1026 is not set
++# CONFIG_SENSORS_ADM1029 is not set
++# CONFIG_SENSORS_ADM1031 is not set
++# CONFIG_SENSORS_ADM9240 is not set
++# CONFIG_SENSORS_ADT7470 is not set
++# CONFIG_SENSORS_ADT7473 is not set
++# CONFIG_SENSORS_ATXP1 is not set
++# CONFIG_SENSORS_DS1621 is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_F71882FG is not set
++# CONFIG_SENSORS_F75375S is not set
++# CONFIG_SENSORS_GL518SM is not set
++# CONFIG_SENSORS_GL520SM is not set
++# CONFIG_SENSORS_IT87 is not set
++# CONFIG_SENSORS_LM63 is not set
++# CONFIG_SENSORS_LM75 is not set
++# CONFIG_SENSORS_LM77 is not set
++# CONFIG_SENSORS_LM78 is not set
++# CONFIG_SENSORS_LM80 is not set
++# CONFIG_SENSORS_LM83 is not set
++# CONFIG_SENSORS_LM85 is not set
++# CONFIG_SENSORS_LM87 is not set
++# CONFIG_SENSORS_LM90 is not set
++# CONFIG_SENSORS_LM92 is not set
++# CONFIG_SENSORS_LM93 is not set
++# CONFIG_SENSORS_MAX1619 is not set
++# CONFIG_SENSORS_MAX6650 is not set
++# CONFIG_SENSORS_PC87360 is not set
++# CONFIG_SENSORS_PC87427 is not set
++# CONFIG_SENSORS_DME1737 is not set
++# CONFIG_SENSORS_SMSC47M1 is not set
++# CONFIG_SENSORS_SMSC47M192 is not set
++# CONFIG_SENSORS_SMSC47B397 is not set
++# CONFIG_SENSORS_ADS7828 is not set
++# CONFIG_SENSORS_THMC50 is not set
++# CONFIG_SENSORS_VT1211 is not set
++# CONFIG_SENSORS_W83781D is not set
++# CONFIG_SENSORS_W83791D is not set
++# CONFIG_SENSORS_W83792D is not set
++# CONFIG_SENSORS_W83793 is not set
++# CONFIG_SENSORS_W83L785TS is not set
++# CONFIG_SENSORS_W83L786NG is not set
++# CONFIG_SENSORS_W83627HF is not set
++# CONFIG_SENSORS_W83627EHF is not set
++# CONFIG_HWMON_DEBUG_CHIP is not set
++# CONFIG_THERMAL is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_83xx_WDT=y
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=m
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++# CONFIG_USB_ARCH_HAS_OHCI is not set
++CONFIG_USB_ARCH_HAS_EHCI=y
++# CONFIG_USB is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_EDAC is not set
++# CONFIG_RTC_CLASS is not set
++# CONFIG_DMADEVICES is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++CONFIG_NFS_V4=y
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++CONFIG_SUNRPC_GSS=y
++# CONFIG_SUNRPC_BIND34 is not set
++CONFIG_RPCSEC_GSS_KRB5=y
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++# CONFIG_MAC_PARTITION is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_BSD_DISKLABEL is not set
++# CONFIG_MINIX_SUBPARTITION is not set
++# CONFIG_SOLARIS_X86_PARTITION is not set
++# CONFIG_UNIXWARE_DISKLABEL is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_KERNEL is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++# CONFIG_CRYPTO_SEQIV is not set
++CONFIG_CRYPTO_MANAGER=y
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++CONFIG_CRYPTO_ECB=m
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=m
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_PPC_CLOCK is not set
+--- /dev/null
++++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
+@@ -0,0 +1,930 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc6
++# Mon Mar 24 08:48:24 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++CONFIG_6xx=y
++# CONFIG_PPC_85xx is not set
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++# CONFIG_44x is not set
++# CONFIG_E200 is not set
++CONFIG_PPC_FPU=y
++# CONFIG_FSL_EMB_PERFMON is not set
++CONFIG_PPC_STD_MMU=y
++CONFIG_PPC_STD_MMU_32=y
++# CONFIG_PPC_MM_SLICES is not set
++# CONFIG_SMP is not set
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFAULT_UIMAGE=y
++# CONFIG_PPC_DCR_NATIVE is not set
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++CONFIG_FAIR_GROUP_SCHED=y
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++# CONFIG_EPOLL is not set
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++# CONFIG_KMOD is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++
++#
++# Platform support
++#
++# CONFIG_PPC_MULTIPLATFORM is not set
++# CONFIG_PPC_82xx is not set
++CONFIG_PPC_83xx=y
++# CONFIG_PPC_86xx is not set
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++CONFIG_MPC83xx=y
++# CONFIG_MPC831x_RDB is not set
++# CONFIG_MPC832x_MDS is not set
++# CONFIG_MPC832x_RDB is not set
++# CONFIG_MPC834x_MDS is not set
++# CONFIG_MPC834x_ITX is not set
++# CONFIG_MPC836x_MDS is not set
++# CONFIG_MPC837x_MDS is not set
++CONFIG_MPC837x_RDB=y
++# CONFIG_SBC834x is not set
++CONFIG_PPC_MPC837x=y
++CONFIG_IPIC=y
++# CONFIG_MPIC is not set
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++# CONFIG_FSL_ULI1575 is not set
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++# CONFIG_TICK_ONESHOT is not set
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_PROC_DEVICETREE=y
++# CONFIG_CMDLINE_BOOL is not set
++# CONFIG_PM is not set
++CONFIG_SECCOMP=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_GENERIC_ISA_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_FSL_SOC=y
++# CONFIG_PCI is not set
++# CONFIG_PCI_DOMAINS is not set
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_BOOT_LOAD=0x00800000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_FW_LOADER is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++# CONFIG_MTD is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=32768
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++CONFIG_CHR_DEV_SG=y
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_SCSI_DEBUG is not set
++CONFIG_ATA=y
++# CONFIG_ATA_NONSTANDARD is not set
++# CONFIG_SATA_MV is not set
++CONFIG_SATA_FSL=y
++# CONFIG_PATA_PLATFORM is not set
++CONFIG_MD=y
++CONFIG_BLK_DEV_MD=y
++# CONFIG_MD_LINEAR is not set
++# CONFIG_MD_RAID0 is not set
++CONFIG_MD_RAID1=y
++# CONFIG_MD_RAID10 is not set
++CONFIG_MD_RAID456=y
++CONFIG_MD_RAID5_RESHAPE=y
++# CONFIG_MD_MULTIPATH is not set
++# CONFIG_MD_FAULTY is not set
++# CONFIG_BLK_DEV_DM is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++CONFIG_MARVELL_PHY=y
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_B44 is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_E1000E_ENABLED is not set
++CONFIG_GIANFAR=y
++CONFIG_GFAR_NAPI=y
++# CONFIG_NETDEV_10000 is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++# CONFIG_SERIAL_8250_EXTENDED is not set
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_OF_PLATFORM is not set
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_NVRAM is not set
++CONFIG_GEN_RTC=y
++# CONFIG_GEN_RTC_X is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=y
++
++#
++# I2C Algorithms
++#
++# CONFIG_I2C_ALGOBIT is not set
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++CONFIG_I2C_MPC=y
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_SENSORS_AD7418 is not set
++# CONFIG_SENSORS_ADM1021 is not set
++# CONFIG_SENSORS_ADM1025 is not set
++# CONFIG_SENSORS_ADM1026 is not set
++# CONFIG_SENSORS_ADM1029 is not set
++# CONFIG_SENSORS_ADM1031 is not set
++# CONFIG_SENSORS_ADM9240 is not set
++# CONFIG_SENSORS_ADT7470 is not set
++# CONFIG_SENSORS_ADT7473 is not set
++# CONFIG_SENSORS_ATXP1 is not set
++# CONFIG_SENSORS_DS1621 is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_F71882FG is not set
++# CONFIG_SENSORS_F75375S is not set
++# CONFIG_SENSORS_GL518SM is not set
++# CONFIG_SENSORS_GL520SM is not set
++# CONFIG_SENSORS_IT87 is not set
++# CONFIG_SENSORS_LM63 is not set
++# CONFIG_SENSORS_LM75 is not set
++# CONFIG_SENSORS_LM77 is not set
++# CONFIG_SENSORS_LM78 is not set
++# CONFIG_SENSORS_LM80 is not set
++# CONFIG_SENSORS_LM83 is not set
++# CONFIG_SENSORS_LM85 is not set
++# CONFIG_SENSORS_LM87 is not set
++# CONFIG_SENSORS_LM90 is not set
++# CONFIG_SENSORS_LM92 is not set
++# CONFIG_SENSORS_LM93 is not set
++# CONFIG_SENSORS_MAX1619 is not set
++# CONFIG_SENSORS_MAX6650 is not set
++# CONFIG_SENSORS_PC87360 is not set
++# CONFIG_SENSORS_PC87427 is not set
++# CONFIG_SENSORS_DME1737 is not set
++# CONFIG_SENSORS_SMSC47M1 is not set
++# CONFIG_SENSORS_SMSC47M192 is not set
++# CONFIG_SENSORS_SMSC47B397 is not set
++# CONFIG_SENSORS_ADS7828 is not set
++# CONFIG_SENSORS_THMC50 is not set
++# CONFIG_SENSORS_VT1211 is not set
++# CONFIG_SENSORS_W83781D is not set
++# CONFIG_SENSORS_W83791D is not set
++# CONFIG_SENSORS_W83792D is not set
++# CONFIG_SENSORS_W83793 is not set
++# CONFIG_SENSORS_W83L785TS is not set
++# CONFIG_SENSORS_W83L786NG is not set
++# CONFIG_SENSORS_W83627HF is not set
++# CONFIG_SENSORS_W83627EHF is not set
++# CONFIG_HWMON_DEBUG_CHIP is not set
++# CONFIG_THERMAL is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_83xx_WDT=y
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=m
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++# CONFIG_USB_ARCH_HAS_OHCI is not set
++CONFIG_USB_ARCH_HAS_EHCI=y
++CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
++
++#
++# Miscellaneous USB options
++#
++# CONFIG_USB_DEVICEFS is not set
++CONFIG_USB_DEVICE_CLASS=y
++# CONFIG_USB_DYNAMIC_MINORS is not set
++# CONFIG_USB_OTG is not set
++
++#
++# USB Host Controller Drivers
++#
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_EHCI_ROOT_HUB_TT=y
++# CONFIG_USB_EHCI_TT_NEWSCHED is not set
++CONFIG_USB_EHCI_FSL=y
++CONFIG_USB_EHCI_HCD_PPC_OF=y
++# CONFIG_USB_ISP116X_HCD is not set
++# CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_EDAC is not set
++# CONFIG_RTC_CLASS is not set
++# CONFIG_DMADEVICES is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++CONFIG_NFS_V4=y
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++CONFIG_SUNRPC_GSS=y
++# CONFIG_SUNRPC_BIND34 is not set
++CONFIG_RPCSEC_GSS_KRB5=y
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++# CONFIG_MAC_PARTITION is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_BSD_DISKLABEL is not set
++# CONFIG_MINIX_SUBPARTITION is not set
++# CONFIG_SOLARIS_X86_PARTITION is not set
++# CONFIG_UNIXWARE_DISKLABEL is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++# CONFIG_ENABLE_MUST_CHECK is not set
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_KERNEL is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_XOR_BLOCKS=y
++CONFIG_ASYNC_CORE=y
++CONFIG_ASYNC_MEMCPY=y
++CONFIG_ASYNC_XOR=y
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++# CONFIG_CRYPTO_SEQIV is not set
++CONFIG_CRYPTO_MANAGER=y
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++CONFIG_CRYPTO_ECB=m
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=m
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_PPC_CLOCK is not set
+--- /dev/null
++++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
+@@ -0,0 +1,828 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc6
++# Mon Mar 24 08:48:38 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++CONFIG_6xx=y
++# CONFIG_PPC_85xx is not set
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++# CONFIG_44x is not set
++# CONFIG_E200 is not set
++CONFIG_PPC_FPU=y
++# CONFIG_FSL_EMB_PERFMON is not set
++CONFIG_PPC_STD_MMU=y
++CONFIG_PPC_STD_MMU_32=y
++# CONFIG_PPC_MM_SLICES is not set
++# CONFIG_SMP is not set
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFAULT_UIMAGE=y
++# CONFIG_PPC_DCR_NATIVE is not set
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++CONFIG_FAIR_GROUP_SCHED=y
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++# CONFIG_KALLSYMS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++# CONFIG_EPOLL is not set
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++# CONFIG_KMOD is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++
++#
++# Platform support
++#
++# CONFIG_PPC_MULTIPLATFORM is not set
++# CONFIG_PPC_82xx is not set
++CONFIG_PPC_83xx=y
++# CONFIG_PPC_86xx is not set
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++CONFIG_MPC83xx=y
++# CONFIG_MPC831x_RDB is not set
++# CONFIG_MPC832x_MDS is not set
++# CONFIG_MPC832x_RDB is not set
++# CONFIG_MPC834x_MDS is not set
++# CONFIG_MPC834x_ITX is not set
++# CONFIG_MPC836x_MDS is not set
++# CONFIG_MPC837x_MDS is not set
++# CONFIG_MPC837x_RDB is not set
++CONFIG_SBC834x=y
++CONFIG_PPC_MPC834x=y
++CONFIG_IPIC=y
++# CONFIG_MPIC is not set
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++# CONFIG_FSL_ULI1575 is not set
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++# CONFIG_TICK_ONESHOT is not set
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_PROC_DEVICETREE=y
++# CONFIG_CMDLINE_BOOL is not set
++# CONFIG_PM is not set
++CONFIG_SECCOMP=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_GENERIC_ISA_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_FSL_SOC=y
++# CONFIG_PCI is not set
++# CONFIG_PCI_DOMAINS is not set
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_BOOT_LOAD=0x00800000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++CONFIG_XFRM_USER=m
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_FW_LOADER is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++# CONFIG_MTD is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=32768
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++CONFIG_BROADCOM_PHY=y
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_B44 is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_E1000E_ENABLED is not set
++CONFIG_GIANFAR=y
++# CONFIG_GFAR_NAPI is not set
++# CONFIG_NETDEV_10000 is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++# CONFIG_SERIAL_8250_EXTENDED is not set
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_OF_PLATFORM is not set
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_NVRAM is not set
++CONFIG_GEN_RTC=y
++# CONFIG_GEN_RTC_X is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=y
++
++#
++# I2C Algorithms
++#
++# CONFIG_I2C_ALGOBIT is not set
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++CONFIG_I2C_MPC=y
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_SENSORS_AD7418 is not set
++# CONFIG_SENSORS_ADM1021 is not set
++# CONFIG_SENSORS_ADM1025 is not set
++# CONFIG_SENSORS_ADM1026 is not set
++# CONFIG_SENSORS_ADM1029 is not set
++# CONFIG_SENSORS_ADM1031 is not set
++# CONFIG_SENSORS_ADM9240 is not set
++# CONFIG_SENSORS_ADT7470 is not set
++# CONFIG_SENSORS_ADT7473 is not set
++# CONFIG_SENSORS_ATXP1 is not set
++# CONFIG_SENSORS_DS1621 is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_F71882FG is not set
++# CONFIG_SENSORS_F75375S is not set
++# CONFIG_SENSORS_GL518SM is not set
++# CONFIG_SENSORS_GL520SM is not set
++# CONFIG_SENSORS_IT87 is not set
++# CONFIG_SENSORS_LM63 is not set
++# CONFIG_SENSORS_LM75 is not set
++# CONFIG_SENSORS_LM77 is not set
++# CONFIG_SENSORS_LM78 is not set
++# CONFIG_SENSORS_LM80 is not set
++# CONFIG_SENSORS_LM83 is not set
++# CONFIG_SENSORS_LM85 is not set
++# CONFIG_SENSORS_LM87 is not set
++# CONFIG_SENSORS_LM90 is not set
++# CONFIG_SENSORS_LM92 is not set
++# CONFIG_SENSORS_LM93 is not set
++# CONFIG_SENSORS_MAX1619 is not set
++# CONFIG_SENSORS_MAX6650 is not set
++# CONFIG_SENSORS_PC87360 is not set
++# CONFIG_SENSORS_PC87427 is not set
++# CONFIG_SENSORS_DME1737 is not set
++# CONFIG_SENSORS_SMSC47M1 is not set
++# CONFIG_SENSORS_SMSC47M192 is not set
++# CONFIG_SENSORS_SMSC47B397 is not set
++# CONFIG_SENSORS_ADS7828 is not set
++# CONFIG_SENSORS_THMC50 is not set
++# CONFIG_SENSORS_VT1211 is not set
++# CONFIG_SENSORS_W83781D is not set
++# CONFIG_SENSORS_W83791D is not set
++# CONFIG_SENSORS_W83792D is not set
++# CONFIG_SENSORS_W83793 is not set
++# CONFIG_SENSORS_W83L785TS is not set
++# CONFIG_SENSORS_W83L786NG is not set
++# CONFIG_SENSORS_W83627HF is not set
++# CONFIG_SENSORS_W83627EHF is not set
++# CONFIG_HWMON_DEBUG_CHIP is not set
++# CONFIG_THERMAL is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_83xx_WDT=y
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
++# CONFIG_USB_SUPPORT is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_EDAC is not set
++# CONFIG_RTC_CLASS is not set
++# CONFIG_DMADEVICES is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++# CONFIG_EXT2_FS is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4DEV_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++CONFIG_NFS_V4=y
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++CONFIG_SUNRPC_GSS=y
++# CONFIG_SUNRPC_BIND34 is not set
++CONFIG_RPCSEC_GSS_KRB5=y
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_KERNEL is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++# CONFIG_CRYPTO_SEQIV is not set
++CONFIG_CRYPTO_MANAGER=y
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++CONFIG_CRYPTO_ECB=m
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=m
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++# CONFIG_CRYPTO_HW is not set
++# CONFIG_PPC_CLOCK is not set
+--- /dev/null
++++ b/arch/powerpc/configs/85xx/ksi8560_defconfig
+@@ -0,0 +1,899 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.24
++# Mon Feb 11 16:25:19 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++# CONFIG_6xx is not set
++CONFIG_PPC_85xx=y
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++# CONFIG_44x is not set
++# CONFIG_E200 is not set
++CONFIG_E500=y
++CONFIG_BOOKE=y
++CONFIG_FSL_BOOKE=y
++CONFIG_FSL_EMB_PERFMON=y
++# CONFIG_PHYS_64BIT is not set
++CONFIG_SPE=y
++# CONFIG_PPC_MM_SLICES is not set
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFAULT_UIMAGE=y
++# CONFIG_PPC_DCR_NATIVE is not set
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_USER_NS is not set
++# CONFIG_PID_NS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_FAIR_GROUP_SCHED=y
++CONFIG_FAIR_USER_SCHED=y
++# CONFIG_FAIR_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++# CONFIG_RELAY is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++CONFIG_HAVE_KPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++# CONFIG_MODULES is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++# CONFIG_PREEMPT_RCU is not set
++
++#
++# Platform support
++#
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++CONFIG_MPC85xx=y
++# CONFIG_MPC8540_ADS is not set
++# CONFIG_MPC8560_ADS is not set
++# CONFIG_MPC85xx_CDS is not set
++# CONFIG_MPC85xx_MDS is not set
++# CONFIG_MPC85xx_DS is not set
++CONFIG_KSI8560=y
++# CONFIG_STX_GP3 is not set
++# CONFIG_TQM8540 is not set
++# CONFIG_TQM8541 is not set
++# CONFIG_TQM8555 is not set
++# CONFIG_TQM8560 is not set
++# CONFIG_SBC8548 is not set
++# CONFIG_SBC8560 is not set
++# CONFIG_IPIC is not set
++CONFIG_MPIC=y
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++CONFIG_CPM2=y
++CONFIG_PPC_CPM_NEW_BINDING=y
++# CONFIG_FSL_ULI1575 is not set
++CONFIG_CPM=y
++
++#
++# Kernel options
++#
++CONFIG_HIGHMEM=y
++# CONFIG_TICK_ONESHOT is not set
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_RCU_TRACE=y
++CONFIG_BINFMT_ELF=y
++CONFIG_BINFMT_MISC=y
++CONFIG_MATH_EMULATION=y
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_PROC_DEVICETREE is not set
++# CONFIG_CMDLINE_BOOL is not set
++# CONFIG_PM is not set
++# CONFIG_SECCOMP is not set
++CONFIG_WANT_DEVICE_TREE=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_FSL_SOC=y
++# CONFIG_PCI is not set
++# CONFIG_PCI_DOMAINS is not set
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_BOOT_LOAD=0x00800000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_FW_LOADER is not set
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++CONFIG_MTD_CONCAT=y
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++# CONFIG_MTD_CMDLINE_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++CONFIG_MTD_JEDECPROBE=y
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PHYSMAP is not set
++CONFIG_MTD_PHYSMAP_OF=y
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=32768
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_EEPROM_93CX6 is not set
++CONFIG_IDE=y
++CONFIG_IDE_MAX_HWIFS=4
++CONFIG_BLK_DEV_IDE=y
++
++#
++# Please see Documentation/ide.txt for help/info on IDE drives
++#
++# CONFIG_BLK_DEV_IDE_SATA is not set
++# CONFIG_BLK_DEV_IDEDISK is not set
++# CONFIG_IDEDISK_MULTI_MODE is not set
++# CONFIG_BLK_DEV_IDECD is not set
++# CONFIG_BLK_DEV_IDETAPE is not set
++# CONFIG_BLK_DEV_IDEFLOPPY is not set
++# CONFIG_IDE_TASK_IOCTL is not set
++CONFIG_IDE_PROC_FS=y
++
++#
++# IDE chipset support/bugfixes
++#
++CONFIG_IDE_GENERIC=y
++# CONFIG_BLK_DEV_PLATFORM is not set
++# CONFIG_BLK_DEV_IDEDMA is not set
++CONFIG_IDE_ARCH_OBSOLETE_INIT=y
++# CONFIG_BLK_DEV_HD is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++CONFIG_MARVELL_PHY=y
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++CONFIG_MDIO_BITBANG=y
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_B44 is not set
++CONFIG_FS_ENET=y
++# CONFIG_FS_ENET_HAS_SCC is not set
++CONFIG_FS_ENET_HAS_FCC=y
++CONFIG_FS_ENET_MDIO_FCC=y
++CONFIG_NETDEV_1000=y
++# CONFIG_E1000E_ENABLED is not set
++CONFIG_GIANFAR=y
++CONFIG_GFAR_NAPI=y
++CONFIG_NETDEV_10000=y
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_SERIAL_CPM=y
++CONFIG_SERIAL_CPM_CONSOLE=y
++CONFIG_SERIAL_CPM_SCC1=y
++# CONFIG_SERIAL_CPM_SCC2 is not set
++# CONFIG_SERIAL_CPM_SCC3 is not set
++# CONFIG_SERIAL_CPM_SCC4 is not set
++# CONFIG_SERIAL_CPM_SMC1 is not set
++# CONFIG_SERIAL_CPM_SMC2 is not set
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++CONFIG_HW_RANDOM=y
++# CONFIG_NVRAM is not set
++CONFIG_GEN_RTC=y
++# CONFIG_GEN_RTC_X is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++# CONFIG_I2C is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_F71882FG is not set
++# CONFIG_SENSORS_IT87 is not set
++# CONFIG_SENSORS_PC87360 is not set
++# CONFIG_SENSORS_PC87427 is not set
++# CONFIG_SENSORS_SMSC47M1 is not set
++# CONFIG_SENSORS_SMSC47B397 is not set
++# CONFIG_SENSORS_VT1211 is not set
++# CONFIG_SENSORS_W83627HF is not set
++# CONFIG_SENSORS_W83627EHF is not set
++# CONFIG_HWMON_DEBUG_CHIP is not set
++# CONFIG_WATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=y
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
++CONFIG_USB_SUPPORT=y
++# CONFIG_USB_ARCH_HAS_HCD is not set
++# CONFIG_USB_ARCH_HAS_OHCI is not set
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_EDAC is not set
++# CONFIG_RTC_CLASS is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++# CONFIG_JBD_DEBUG is not set
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_ROMFS_FS is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++CONFIG_DNOTIFY=y
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_JFFS2_FS is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++# CONFIG_NFS_V3 is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++# CONFIG_MAC_PARTITION is not set
++# CONFIG_MSDOS_PARTITION is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++CONFIG_DEBUG_MUTEXES=y
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++# CONFIG_DEBUG_HIGHMEM is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++CONFIG_FORCED_INLINING=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_DEBUG_STACKOVERFLOW is not set
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++# CONFIG_DEBUGGER is not set
++# CONFIG_KGDB_CONSOLE is not set
++# CONFIG_VIRQ_DEBUG is not set
++# CONFIG_BDI_SWITCH is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_SEQIV is not set
++# CONFIG_CRYPTO_MANAGER is not set
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++# CONFIG_CRYPTO_MD5 is not set
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++# CONFIG_CRYPTO_CBC is not set
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++# CONFIG_CRYPTO_DES is not set
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_PPC_CLOCK is not set
++CONFIG_PPC_LIB_RHEAP=y
+--- /dev/null
++++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
+@@ -0,0 +1,796 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc6
++# Mon Mar 24 08:48:25 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++# CONFIG_6xx is not set
++CONFIG_PPC_85xx=y
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++# CONFIG_44x is not set
++# CONFIG_E200 is not set
++CONFIG_E500=y
++CONFIG_BOOKE=y
++CONFIG_FSL_BOOKE=y
++CONFIG_FSL_EMB_PERFMON=y
++# CONFIG_PHYS_64BIT is not set
++CONFIG_SPE=y
++# CONFIG_PPC_MM_SLICES is not set
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFAULT_UIMAGE=y
++# CONFIG_PPC_DCR_NATIVE is not set
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++# CONFIG_FAIR_GROUP_SCHED is not set
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++# CONFIG_MODULES is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++
++#
++# Platform support
++#
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++CONFIG_MPC85xx=y
++CONFIG_MPC8540_ADS=y
++# CONFIG_MPC8560_ADS is not set
++# CONFIG_MPC85xx_CDS is not set
++# CONFIG_MPC85xx_MDS is not set
++# CONFIG_MPC85xx_DS is not set
++# CONFIG_STX_GP3 is not set
++# CONFIG_TQM8540 is not set
++# CONFIG_TQM8541 is not set
++# CONFIG_TQM8555 is not set
++# CONFIG_TQM8560 is not set
++# CONFIG_SBC8548 is not set
++# CONFIG_SBC8560 is not set
++# CONFIG_IPIC is not set
++CONFIG_MPIC=y
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++# CONFIG_CPM2 is not set
++# CONFIG_FSL_ULI1575 is not set
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_BINFMT_ELF=y
++CONFIG_BINFMT_MISC=y
++CONFIG_MATH_EMULATION=y
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_PROC_DEVICETREE=y
++# CONFIG_CMDLINE_BOOL is not set
++# CONFIG_PM is not set
++# CONFIG_SECCOMP is not set
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_FSL_SOC=y
++# CONFIG_PCI is not set
++# CONFIG_PCI_DOMAINS is not set
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_BOOT_LOAD=0x00800000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++CONFIG_XFRM_USER=y
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_FW_LOADER is not set
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++# CONFIG_MTD is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=32768
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_B44 is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_E1000E_ENABLED is not set
++CONFIG_GIANFAR=y
++CONFIG_GFAR_NAPI=y
++CONFIG_NETDEV_10000=y
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++# CONFIG_SERIAL_8250_EXTENDED is not set
++CONFIG_SERIAL_8250_SHARE_IRQ=y
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_OF_PLATFORM is not set
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_NVRAM is not set
++CONFIG_GEN_RTC=y
++# CONFIG_GEN_RTC_X is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++# CONFIG_I2C is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_F71882FG is not set
++# CONFIG_SENSORS_IT87 is not set
++# CONFIG_SENSORS_PC87360 is not set
++# CONFIG_SENSORS_PC87427 is not set
++# CONFIG_SENSORS_SMSC47M1 is not set
++# CONFIG_SENSORS_SMSC47B397 is not set
++# CONFIG_SENSORS_VT1211 is not set
++# CONFIG_SENSORS_W83627HF is not set
++# CONFIG_SENSORS_W83627EHF is not set
++# CONFIG_HWMON_DEBUG_CHIP is not set
++# CONFIG_THERMAL is not set
++# CONFIG_WATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=y
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
++CONFIG_USB_SUPPORT=y
++# CONFIG_USB_ARCH_HAS_HCD is not set
++# CONFIG_USB_ARCH_HAS_OHCI is not set
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_EDAC is not set
++# CONFIG_RTC_CLASS is not set
++# CONFIG_DMADEVICES is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++# CONFIG_NFS_V3 is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++# CONFIG_MAC_PARTITION is not set
++# CONFIG_MSDOS_PARTITION is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++CONFIG_DEBUG_MUTEXES=y
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_DEBUG_STACKOVERFLOW is not set
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++# CONFIG_DEBUGGER is not set
++# CONFIG_BDI_SWITCH is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_SEQIV is not set
++# CONFIG_CRYPTO_MANAGER is not set
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++# CONFIG_CRYPTO_MD5 is not set
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++# CONFIG_CRYPTO_CBC is not set
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++# CONFIG_CRYPTO_DES is not set
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_PPC_CLOCK is not set
+--- /dev/null
++++ b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
+@@ -0,0 +1,1564 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc7
++# Mon Mar 31 11:37:03 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++# CONFIG_6xx is not set
++CONFIG_PPC_85xx=y
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++# CONFIG_44x is not set
++# CONFIG_E200 is not set
++CONFIG_E500=y
++CONFIG_BOOKE=y
++CONFIG_FSL_BOOKE=y
++CONFIG_FSL_EMB_PERFMON=y
++# CONFIG_PHYS_64BIT is not set
++CONFIG_SPE=y
++# CONFIG_PPC_MM_SLICES is not set
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFAULT_UIMAGE=y
++# CONFIG_PPC_DCR_NATIVE is not set
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_BSD_PROCESS_ACCT=y
++# CONFIG_BSD_PROCESS_ACCT_V3 is not set
++# CONFIG_TASKSTATS is not set
++CONFIG_AUDIT=y
++# CONFIG_AUDITSYSCALL is not set
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++# CONFIG_FAIR_GROUP_SCHED is not set
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++CONFIG_KALLSYMS_ALL=y
++CONFIG_KALLSYMS_EXTRA_PASS=y
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODULE_FORCE_UNLOAD=y
++CONFIG_MODVERSIONS=y
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++CONFIG_BLOCK=y
++CONFIG_LBD=y
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
++CONFIG_CLASSIC_RCU=y
++
++#
++# Platform support
++#
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++CONFIG_MPC85xx=y
++# CONFIG_MPC8540_ADS is not set
++# CONFIG_MPC8560_ADS is not set
++# CONFIG_MPC85xx_CDS is not set
++# CONFIG_MPC85xx_MDS is not set
++CONFIG_MPC85xx_DS=y
++# CONFIG_KSI8560 is not set
++# CONFIG_STX_GP3 is not set
++# CONFIG_TQM8540 is not set
++# CONFIG_TQM8541 is not set
++# CONFIG_TQM8555 is not set
++# CONFIG_TQM8560 is not set
++# CONFIG_SBC8548 is not set
++# CONFIG_SBC8560 is not set
++# CONFIG_IPIC is not set
++CONFIG_MPIC=y
++# CONFIG_MPIC_WEIRD is not set
++CONFIG_PPC_I8259=y
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++# CONFIG_CPM2 is not set
++CONFIG_FSL_ULI1575=y
++
++#
++# Kernel options
++#
++CONFIG_HIGHMEM=y
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_BINFMT_ELF=y
++CONFIG_BINFMT_MISC=m
++CONFIG_FORCE_MAX_ZONEORDER=11
++CONFIG_MATH_EMULATION=y
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_PROC_DEVICETREE=y
++# CONFIG_CMDLINE_BOOL is not set
++# CONFIG_PM is not set
++CONFIG_SECCOMP=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_GENERIC_ISA_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_FSL_SOC=y
++CONFIG_FSL_PCI=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++# CONFIG_PCIEPORTBUS is not set
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++CONFIG_PCI_LEGACY=y
++# CONFIG_PCI_DEBUG is not set
++# CONFIG_PCCARD is not set
++# CONFIG_HOTPLUG_PCI is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_BOOT_LOAD=0x00800000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++CONFIG_XFRM_USER=y
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++CONFIG_NET_KEY=m
++# CONFIG_NET_KEY_MIGRATE is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_IP_ADVANCED_ROUTER=y
++CONFIG_ASK_IP_FIB_HASH=y
++# CONFIG_IP_FIB_TRIE is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_MULTIPLE_TABLES=y
++CONFIG_IP_ROUTE_MULTIPATH=y
++CONFIG_IP_ROUTE_VERBOSE=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++CONFIG_IP_PNP_RARP=y
++CONFIG_NET_IPIP=y
++CONFIG_NET_IPGRE=y
++CONFIG_NET_IPGRE_BROADCAST=y
++CONFIG_IP_MROUTE=y
++CONFIG_IP_PIMSM_V1=y
++CONFIG_IP_PIMSM_V2=y
++CONFIG_ARPD=y
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++CONFIG_INET_TUNNEL=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++CONFIG_IPV6=y
++# CONFIG_IPV6_PRIVACY is not set
++# CONFIG_IPV6_ROUTER_PREF is not set
++# CONFIG_IPV6_OPTIMISTIC_DAD is not set
++# CONFIG_INET6_AH is not set
++# CONFIG_INET6_ESP is not set
++# CONFIG_INET6_IPCOMP is not set
++# CONFIG_IPV6_MIP6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++CONFIG_INET6_XFRM_MODE_TRANSPORT=y
++CONFIG_INET6_XFRM_MODE_TUNNEL=y
++CONFIG_INET6_XFRM_MODE_BEET=y
++# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
++CONFIG_IPV6_SIT=y
++# CONFIG_IPV6_TUNNEL is not set
++# CONFIG_IPV6_MULTIPLE_TABLES is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++CONFIG_IP_SCTP=m
++# CONFIG_SCTP_DBG_MSG is not set
++# CONFIG_SCTP_DBG_OBJCNT is not set
++# CONFIG_SCTP_HMAC_NONE is not set
++# CONFIG_SCTP_HMAC_SHA1 is not set
++CONFIG_SCTP_HMAC_MD5=y
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++CONFIG_FIB_RULES=y
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++# CONFIG_MTD is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++CONFIG_BLK_DEV_NBD=y
++# CONFIG_BLK_DEV_SX8 is not set
++# CONFIG_BLK_DEV_UB is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=131072
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_SGI_IOC4 is not set
++# CONFIG_TIFM_CORE is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=y
++CONFIG_CHR_DEV_ST=y
++# CONFIG_CHR_DEV_OSST is not set
++CONFIG_BLK_DEV_SR=y
++# CONFIG_BLK_DEV_SR_VENDOR is not set
++CONFIG_CHR_DEV_SG=y
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++CONFIG_SCSI_MULTI_LUN=y
++# CONFIG_SCSI_CONSTANTS is not set
++CONFIG_SCSI_LOGGING=y
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
++# CONFIG_SCSI_3W_9XXX is not set
++# CONFIG_SCSI_ACARD is not set
++# CONFIG_SCSI_AACRAID is not set
++# CONFIG_SCSI_AIC7XXX is not set
++# CONFIG_SCSI_AIC7XXX_OLD is not set
++# CONFIG_SCSI_AIC79XX is not set
++# CONFIG_SCSI_AIC94XX is not set
++# CONFIG_SCSI_DPT_I2O is not set
++# CONFIG_SCSI_ADVANSYS is not set
++# CONFIG_SCSI_ARCMSR is not set
++# CONFIG_MEGARAID_NEWGEN is not set
++# CONFIG_MEGARAID_LEGACY is not set
++# CONFIG_MEGARAID_SAS is not set
++# CONFIG_SCSI_HPTIOP is not set
++# CONFIG_SCSI_BUSLOGIC is not set
++# CONFIG_SCSI_DMX3191D is not set
++# CONFIG_SCSI_EATA is not set
++# CONFIG_SCSI_FUTURE_DOMAIN is not set
++# CONFIG_SCSI_GDTH is not set
++# CONFIG_SCSI_IPS is not set
++# CONFIG_SCSI_INITIO is not set
++# CONFIG_SCSI_INIA100 is not set
++# CONFIG_SCSI_MVSAS is not set
++# CONFIG_SCSI_STEX is not set
++# CONFIG_SCSI_SYM53C8XX_2 is not set
++# CONFIG_SCSI_IPR is not set
++# CONFIG_SCSI_QLOGIC_1280 is not set
++# CONFIG_SCSI_QLA_FC is not set
++# CONFIG_SCSI_QLA_ISCSI is not set
++# CONFIG_SCSI_LPFC is not set
++# CONFIG_SCSI_DC395x is not set
++# CONFIG_SCSI_DC390T is not set
++# CONFIG_SCSI_NSP32 is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_SCSI_SRP is not set
++CONFIG_ATA=y
++# CONFIG_ATA_NONSTANDARD is not set
++CONFIG_SATA_AHCI=y
++# CONFIG_SATA_SVW is not set
++# CONFIG_ATA_PIIX is not set
++# CONFIG_SATA_MV is not set
++# CONFIG_SATA_NV is not set
++# CONFIG_PDC_ADMA is not set
++# CONFIG_SATA_QSTOR is not set
++# CONFIG_SATA_PROMISE is not set
++# CONFIG_SATA_SX4 is not set
++# CONFIG_SATA_SIL is not set
++# CONFIG_SATA_SIL24 is not set
++# CONFIG_SATA_SIS is not set
++# CONFIG_SATA_ULI is not set
++# CONFIG_SATA_VIA is not set
++# CONFIG_SATA_VITESSE is not set
++# CONFIG_SATA_INIC162X is not set
++# CONFIG_SATA_FSL is not set
++CONFIG_PATA_ALI=y
++# CONFIG_PATA_AMD is not set
++# CONFIG_PATA_ARTOP is not set
++# CONFIG_PATA_ATIIXP is not set
++# CONFIG_PATA_CMD640_PCI is not set
++# CONFIG_PATA_CMD64X is not set
++# CONFIG_PATA_CS5520 is not set
++# CONFIG_PATA_CS5530 is not set
++# CONFIG_PATA_CYPRESS is not set
++# CONFIG_PATA_EFAR is not set
++# CONFIG_ATA_GENERIC is not set
++# CONFIG_PATA_HPT366 is not set
++# CONFIG_PATA_HPT37X is not set
++# CONFIG_PATA_HPT3X2N is not set
++# CONFIG_PATA_HPT3X3 is not set
++# CONFIG_PATA_IT821X is not set
++# CONFIG_PATA_IT8213 is not set
++# CONFIG_PATA_JMICRON is not set
++# CONFIG_PATA_TRIFLEX is not set
++# CONFIG_PATA_MARVELL is not set
++# CONFIG_PATA_MPIIX is not set
++# CONFIG_PATA_OLDPIIX is not set
++# CONFIG_PATA_NETCELL is not set
++# CONFIG_PATA_NINJA32 is not set
++# CONFIG_PATA_NS87410 is not set
++# CONFIG_PATA_NS87415 is not set
++# CONFIG_PATA_OPTI is not set
++# CONFIG_PATA_OPTIDMA is not set
++# CONFIG_PATA_PDC_OLD is not set
++# CONFIG_PATA_RADISYS is not set
++# CONFIG_PATA_RZ1000 is not set
++# CONFIG_PATA_SC1200 is not set
++# CONFIG_PATA_SERVERWORKS is not set
++# CONFIG_PATA_PDC2027X is not set
++# CONFIG_PATA_SIL680 is not set
++# CONFIG_PATA_SIS is not set
++# CONFIG_PATA_VIA is not set
++# CONFIG_PATA_WINBOND is not set
++# CONFIG_PATA_PLATFORM is not set
++# CONFIG_MD is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++CONFIG_DUMMY=y
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++CONFIG_VITESSE_PHY=y
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_NET_PCI is not set
++# CONFIG_B44 is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++# CONFIG_E1000 is not set
++# CONFIG_E1000E is not set
++# CONFIG_E1000E_ENABLED is not set
++# CONFIG_IP1000 is not set
++# CONFIG_IGB is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++# CONFIG_R8169 is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_VIA_VELOCITY is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++CONFIG_GIANFAR=y
++CONFIG_GFAR_NAPI=y
++# CONFIG_QLA3XXX is not set
++# CONFIG_ATL1 is not set
++CONFIG_NETDEV_10000=y
++# CONFIG_CHELSIO_T1 is not set
++# CONFIG_CHELSIO_T3 is not set
++# CONFIG_IXGBE is not set
++# CONFIG_IXGB is not set
++# CONFIG_S2IO is not set
++# CONFIG_MYRI10GE is not set
++# CONFIG_NETXEN_NIC is not set
++# CONFIG_NIU is not set
++# CONFIG_MLX4_CORE is not set
++# CONFIG_TEHUTI is not set
++# CONFIG_BNX2X is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NET_FC is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++CONFIG_SERIO=y
++CONFIG_SERIO_I8042=y
++CONFIG_SERIO_SERPORT=y
++# CONFIG_SERIO_PCIPS2 is not set
++CONFIG_SERIO_LIBPS2=y
++# CONFIG_SERIO_RAW is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_PCI=y
++CONFIG_SERIAL_8250_NR_UARTS=2
++CONFIG_SERIAL_8250_RUNTIME_UARTS=2
++CONFIG_SERIAL_8250_EXTENDED=y
++CONFIG_SERIAL_8250_MANY_PORTS=y
++CONFIG_SERIAL_8250_SHARE_IRQ=y
++CONFIG_SERIAL_8250_DETECT_IRQ=y
++CONFIG_SERIAL_8250_RSA=y
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_JSM is not set
++# CONFIG_SERIAL_OF_PLATFORM is not set
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++CONFIG_NVRAM=y
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++# CONFIG_I2C_CHARDEV is not set
++
++#
++# I2C Algorithms
++#
++# CONFIG_I2C_ALGOBIT is not set
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++# CONFIG_I2C_ALI1535 is not set
++# CONFIG_I2C_ALI1563 is not set
++# CONFIG_I2C_ALI15X3 is not set
++# CONFIG_I2C_AMD756 is not set
++# CONFIG_I2C_AMD8111 is not set
++# CONFIG_I2C_I801 is not set
++# CONFIG_I2C_I810 is not set
++# CONFIG_I2C_PIIX4 is not set
++CONFIG_I2C_MPC=y
++# CONFIG_I2C_NFORCE2 is not set
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_PROSAVAGE is not set
++# CONFIG_I2C_SAVAGE4 is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_SIS5595 is not set
++# CONFIG_I2C_SIS630 is not set
++# CONFIG_I2C_SIS96X is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_TINY_USB is not set
++# CONFIG_I2C_VIA is not set
++# CONFIG_I2C_VIAPRO is not set
++# CONFIG_I2C_VOODOO3 is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++CONFIG_SENSORS_EEPROM=y
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
++# CONFIG_WATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++CONFIG_DVB_CORE=m
++# CONFIG_DVB_CORE_ATTACH is not set
++CONFIG_DVB_CAPTURE_DRIVERS=y
++
++#
++# Supported SAA7146 based PCI Adapters
++#
++# CONFIG_TTPCI_EEPROM is not set
++# CONFIG_DVB_BUDGET_CORE is not set
++
++#
++# Supported USB Adapters
++#
++# CONFIG_DVB_USB is not set
++# CONFIG_DVB_TTUSB_BUDGET is not set
++# CONFIG_DVB_TTUSB_DEC is not set
++# CONFIG_DVB_CINERGYT2 is not set
++
++#
++# Supported FlexCopII (B2C2) Adapters
++#
++# CONFIG_DVB_B2C2_FLEXCOP is not set
++
++#
++# Supported BT878 Adapters
++#
++
++#
++# Supported Pluto2 Adapters
++#
++# CONFIG_DVB_PLUTO2 is not set
++
++#
++# Supported DVB Frontends
++#
++
++#
++# Customise DVB Frontends
++#
++# CONFIG_DVB_FE_CUSTOMISE is not set
++
++#
++# DVB-S (satellite) frontends
++#
++# CONFIG_DVB_STV0299 is not set
++# CONFIG_DVB_CX24110 is not set
++# CONFIG_DVB_CX24123 is not set
++# CONFIG_DVB_TDA8083 is not set
++# CONFIG_DVB_MT312 is not set
++# CONFIG_DVB_VES1X93 is not set
++# CONFIG_DVB_S5H1420 is not set
++# CONFIG_DVB_TDA10086 is not set
++
++#
++# DVB-T (terrestrial) frontends
++#
++# CONFIG_DVB_SP8870 is not set
++# CONFIG_DVB_SP887X is not set
++# CONFIG_DVB_CX22700 is not set
++# CONFIG_DVB_CX22702 is not set
++# CONFIG_DVB_L64781 is not set
++# CONFIG_DVB_TDA1004X is not set
++# CONFIG_DVB_NXT6000 is not set
++# CONFIG_DVB_MT352 is not set
++# CONFIG_DVB_ZL10353 is not set
++# CONFIG_DVB_DIB3000MB is not set
++# CONFIG_DVB_DIB3000MC is not set
++# CONFIG_DVB_DIB7000M is not set
++# CONFIG_DVB_DIB7000P is not set
++
++#
++# DVB-C (cable) frontends
++#
++# CONFIG_DVB_VES1820 is not set
++# CONFIG_DVB_TDA10021 is not set
++# CONFIG_DVB_TDA10023 is not set
++# CONFIG_DVB_STV0297 is not set
++
++#
++# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
++#
++# CONFIG_DVB_NXT200X is not set
++# CONFIG_DVB_OR51211 is not set
++# CONFIG_DVB_OR51132 is not set
++# CONFIG_DVB_BCM3510 is not set
++# CONFIG_DVB_LGDT330X is not set
++# CONFIG_DVB_S5H1409 is not set
++
++#
++# Tuners/PLL support
++#
++# CONFIG_DVB_PLL is not set
++# CONFIG_DVB_TDA826X is not set
++# CONFIG_DVB_TDA827X is not set
++# CONFIG_DVB_TDA18271 is not set
++# CONFIG_DVB_TUNER_QT1010 is not set
++# CONFIG_DVB_TUNER_MT2060 is not set
++# CONFIG_DVB_TUNER_MT2266 is not set
++# CONFIG_DVB_TUNER_MT2131 is not set
++# CONFIG_DVB_TUNER_DIB0070 is not set
++# CONFIG_DVB_TUNER_XC5000 is not set
++
++#
++# Miscellaneous devices
++#
++# CONFIG_DVB_LNBP21 is not set
++# CONFIG_DVB_ISL6421 is not set
++# CONFIG_DVB_TUA6100 is not set
++CONFIG_DAB=y
++# CONFIG_USB_DABUSB is not set
++
++#
++# Graphics support
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=y
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Console display driver support
++#
++CONFIG_VGA_CONSOLE=y
++# CONFIG_VGACON_SOFT_SCROLLBACK is not set
++CONFIG_DUMMY_CONSOLE=y
++
++#
++# Sound
++#
++CONFIG_SOUND=y
++
++#
++# Advanced Linux Sound Architecture
++#
++CONFIG_SND=y
++CONFIG_SND_TIMER=y
++CONFIG_SND_PCM=y
++# CONFIG_SND_SEQUENCER is not set
++# CONFIG_SND_MIXER_OSS is not set
++# CONFIG_SND_PCM_OSS is not set
++# CONFIG_SND_DYNAMIC_MINORS is not set
++CONFIG_SND_SUPPORT_OLD_API=y
++CONFIG_SND_VERBOSE_PROCFS=y
++# CONFIG_SND_VERBOSE_PRINTK is not set
++# CONFIG_SND_DEBUG is not set
++
++#
++# Generic devices
++#
++CONFIG_SND_AC97_CODEC=y
++# CONFIG_SND_DUMMY is not set
++# CONFIG_SND_MTPAV is not set
++# CONFIG_SND_SERIAL_U16550 is not set
++# CONFIG_SND_MPU401 is not set
++
++#
++# PCI devices
++#
++# CONFIG_SND_AD1889 is not set
++# CONFIG_SND_ALS300 is not set
++# CONFIG_SND_ALS4000 is not set
++# CONFIG_SND_ALI5451 is not set
++# CONFIG_SND_ATIIXP is not set
++# CONFIG_SND_ATIIXP_MODEM is not set
++# CONFIG_SND_AU8810 is not set
++# CONFIG_SND_AU8820 is not set
++# CONFIG_SND_AU8830 is not set
++# CONFIG_SND_AZT3328 is not set
++# CONFIG_SND_BT87X is not set
++# CONFIG_SND_CA0106 is not set
++# CONFIG_SND_CMIPCI is not set
++# CONFIG_SND_OXYGEN is not set
++# CONFIG_SND_CS4281 is not set
++# CONFIG_SND_CS46XX is not set
++# CONFIG_SND_CS5530 is not set
++# CONFIG_SND_DARLA20 is not set
++# CONFIG_SND_GINA20 is not set
++# CONFIG_SND_LAYLA20 is not set
++# CONFIG_SND_DARLA24 is not set
++# CONFIG_SND_GINA24 is not set
++# CONFIG_SND_LAYLA24 is not set
++# CONFIG_SND_MONA is not set
++# CONFIG_SND_MIA is not set
++# CONFIG_SND_ECHO3G is not set
++# CONFIG_SND_INDIGO is not set
++# CONFIG_SND_INDIGOIO is not set
++# CONFIG_SND_INDIGODJ is not set
++# CONFIG_SND_EMU10K1 is not set
++# CONFIG_SND_EMU10K1X is not set
++# CONFIG_SND_ENS1370 is not set
++# CONFIG_SND_ENS1371 is not set
++# CONFIG_SND_ES1938 is not set
++# CONFIG_SND_ES1968 is not set
++# CONFIG_SND_FM801 is not set
++# CONFIG_SND_HDA_INTEL is not set
++# CONFIG_SND_HDSP is not set
++# CONFIG_SND_HDSPM is not set
++# CONFIG_SND_HIFIER is not set
++# CONFIG_SND_ICE1712 is not set
++# CONFIG_SND_ICE1724 is not set
++CONFIG_SND_INTEL8X0=y
++# CONFIG_SND_INTEL8X0M is not set
++# CONFIG_SND_KORG1212 is not set
++# CONFIG_SND_MAESTRO3 is not set
++# CONFIG_SND_MIXART is not set
++# CONFIG_SND_NM256 is not set
++# CONFIG_SND_PCXHR is not set
++# CONFIG_SND_RIPTIDE is not set
++# CONFIG_SND_RME32 is not set
++# CONFIG_SND_RME96 is not set
++# CONFIG_SND_RME9652 is not set
++# CONFIG_SND_SONICVIBES is not set
++# CONFIG_SND_TRIDENT is not set
++# CONFIG_SND_VIA82XX is not set
++# CONFIG_SND_VIA82XX_MODEM is not set
++# CONFIG_SND_VIRTUOSO is not set
++# CONFIG_SND_VX222 is not set
++# CONFIG_SND_YMFPCI is not set
++# CONFIG_SND_AC97_POWER_SAVE is not set
++
++#
++# ALSA PowerMac devices
++#
++
++#
++# ALSA PowerPC devices
++#
++
++#
++# USB devices
++#
++# CONFIG_SND_USB_AUDIO is not set
++# CONFIG_SND_USB_USX2Y is not set
++# CONFIG_SND_USB_CAIAQ is not set
++
++#
++# System on Chip audio support
++#
++# CONFIG_SND_SOC is not set
++
++#
++# SoC Audio support for SuperH
++#
++
++#
++# ALSA SoC audio for Freescale SOCs
++#
++
++#
++# Open Sound System
++#
++# CONFIG_SOUND_PRIME is not set
++CONFIG_AC97_BUS=y
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
++
++#
++# USB Input Devices
++#
++CONFIG_USB_HID=y
++# CONFIG_USB_HIDINPUT_POWERBOOK is not set
++# CONFIG_HID_FF is not set
++# CONFIG_USB_HIDDEV is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
++
++#
++# Miscellaneous USB options
++#
++CONFIG_USB_DEVICEFS=y
++CONFIG_USB_DEVICE_CLASS=y
++# CONFIG_USB_DYNAMIC_MINORS is not set
++# CONFIG_USB_OTG is not set
++
++#
++# USB Host Controller Drivers
++#
++CONFIG_USB_EHCI_HCD=y
++# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
++# CONFIG_USB_EHCI_TT_NEWSCHED is not set
++# CONFIG_USB_EHCI_FSL is not set
++CONFIG_USB_EHCI_HCD_PPC_OF=y
++# CONFIG_USB_ISP116X_HCD is not set
++CONFIG_USB_OHCI_HCD=y
++CONFIG_USB_OHCI_HCD_PPC_OF=y
++CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
++CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
++CONFIG_USB_OHCI_HCD_PCI=y
++CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
++CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
++CONFIG_USB_OHCI_LITTLE_ENDIAN=y
++# CONFIG_USB_UHCI_HCD is not set
++# CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
++
++#
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++# CONFIG_USB_PRINTER is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# may also be needed; see USB_STORAGE Help for more information
++#
++CONFIG_USB_STORAGE=y
++# CONFIG_USB_STORAGE_DEBUG is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_ISD200 is not set
++# CONFIG_USB_STORAGE_DPCM is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++CONFIG_USB_MON=y
++
++#
++# USB port drivers
++#
++# CONFIG_USB_SERIAL is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_AUERSWALD is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_PHIDGET is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_SISUSBVGA is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++# CONFIG_USB_TEST is not set
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++# CONFIG_RTC_DRV_S35390A is not set
++
++#
++# SPI RTC drivers
++#
++
++#
++# Platform RTC drivers
++#
++CONFIG_RTC_DRV_CMOS=y
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++CONFIG_DMADEVICES=y
++
++#
++# DMA Devices
++#
++CONFIG_FSL_DMA=y
++# CONFIG_FSL_DMA_SELFTEST is not set
++CONFIG_DMA_ENGINE=y
++
++#
++# DMA Clients
++#
++# CONFIG_NET_DMA is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++CONFIG_ISO9660_FS=m
++CONFIG_JOLIET=y
++CONFIG_ZISOFS=y
++CONFIG_UDF_FS=m
++CONFIG_UDF_NLS=y
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++CONFIG_MSDOS_FS=m
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++CONFIG_NTFS_FS=y
++# CONFIG_NTFS_DEBUG is not set
++# CONFIG_NTFS_RW is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++CONFIG_ADFS_FS=m
++# CONFIG_ADFS_FS_RW is not set
++CONFIG_AFFS_FS=m
++CONFIG_HFS_FS=m
++CONFIG_HFSPLUS_FS=m
++CONFIG_BEFS_FS=m
++# CONFIG_BEFS_DEBUG is not set
++CONFIG_BFS_FS=m
++CONFIG_EFS_FS=m
++CONFIG_CRAMFS=y
++CONFIG_VXFS_FS=m
++# CONFIG_MINIX_FS is not set
++CONFIG_HPFS_FS=m
++CONFIG_QNX4FS_FS=m
++# CONFIG_ROMFS_FS is not set
++CONFIG_SYSV_FS=m
++CONFIG_UFS_FS=m
++# CONFIG_UFS_FS_WRITE is not set
++# CONFIG_UFS_DEBUG is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++CONFIG_NFS_V4=y
++# CONFIG_NFS_DIRECTIO is not set
++CONFIG_NFSD=y
++# CONFIG_NFSD_V3 is not set
++CONFIG_NFSD_TCP=y
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_EXPORTFS=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++CONFIG_SUNRPC_GSS=y
++# CONFIG_SUNRPC_BIND34 is not set
++CONFIG_RPCSEC_GSS_KRB5=y
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++CONFIG_MAC_PARTITION=y
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_BSD_DISKLABEL is not set
++# CONFIG_MINIX_SUBPARTITION is not set
++# CONFIG_SOLARIS_X86_PARTITION is not set
++# CONFIG_UNIXWARE_DISKLABEL is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++# CONFIG_NLS_CODEPAGE_437 is not set
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++# CONFIG_NLS_CODEPAGE_850 is not set
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++# CONFIG_NLS_ISO8859_1 is not set
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++CONFIG_NLS_UTF8=m
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++CONFIG_LIBCRC32C=m
++CONFIG_ZLIB_INFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++CONFIG_HAVE_LMB=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++# CONFIG_DEBUG_HIGHMEM is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++CONFIG_DEBUG_INFO=y
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_DEBUG_STACKOVERFLOW is not set
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++# CONFIG_DEBUGGER is not set
++# CONFIG_BDI_SWITCH is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++# CONFIG_CRYPTO_SEQIV is not set
++CONFIG_CRYPTO_HASH=y
++CONFIG_CRYPTO_MANAGER=y
++CONFIG_CRYPTO_HMAC=y
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++CONFIG_CRYPTO_SHA1=m
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=m
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_CRYPTO_DEV_HIFN_795X is not set
++# CONFIG_PPC_CLOCK is not set
+--- /dev/null
++++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
+@@ -0,0 +1,885 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc6
++# Mon Mar 24 08:48:27 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++# CONFIG_6xx is not set
++CONFIG_PPC_85xx=y
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++# CONFIG_44x is not set
++# CONFIG_E200 is not set
++CONFIG_E500=y
++CONFIG_BOOKE=y
++CONFIG_FSL_BOOKE=y
++CONFIG_FSL_EMB_PERFMON=y
++# CONFIG_PHYS_64BIT is not set
++CONFIG_SPE=y
++# CONFIG_PPC_MM_SLICES is not set
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFAULT_UIMAGE=y
++# CONFIG_PPC_DCR_NATIVE is not set
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++# CONFIG_FAIR_GROUP_SCHED is not set
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++# CONFIG_MODULES is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++
++#
++# Platform support
++#
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++CONFIG_MPC85xx=y
++# CONFIG_MPC8540_ADS is not set
++CONFIG_MPC8560_ADS=y
++# CONFIG_MPC85xx_CDS is not set
++# CONFIG_MPC85xx_MDS is not set
++# CONFIG_MPC85xx_DS is not set
++# CONFIG_STX_GP3 is not set
++# CONFIG_TQM8540 is not set
++# CONFIG_TQM8541 is not set
++# CONFIG_TQM8555 is not set
++# CONFIG_TQM8560 is not set
++# CONFIG_SBC8548 is not set
++# CONFIG_SBC8560 is not set
++# CONFIG_IPIC is not set
++CONFIG_MPIC=y
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++CONFIG_CPM2=y
++CONFIG_PPC_CPM_NEW_BINDING=y
++# CONFIG_FSL_ULI1575 is not set
++CONFIG_CPM=y
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++# CONFIG_TICK_ONESHOT is not set
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_BINFMT_ELF=y
++CONFIG_BINFMT_MISC=y
++CONFIG_MATH_EMULATION=y
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_PROC_DEVICETREE is not set
++# CONFIG_CMDLINE_BOOL is not set
++# CONFIG_PM is not set
++# CONFIG_SECCOMP is not set
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_FSL_SOC=y
++CONFIG_FSL_PCI=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++# CONFIG_PCIEPORTBUS is not set
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++CONFIG_PCI_LEGACY=y
++CONFIG_PCI_DEBUG=y
++# CONFIG_PCCARD is not set
++# CONFIG_HOTPLUG_PCI is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_BOOT_LOAD=0x00800000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_FW_LOADER is not set
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++# CONFIG_MTD is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=32768
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_SGI_IOC4 is not set
++# CONFIG_TIFM_CORE is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++CONFIG_MARVELL_PHY=y
++CONFIG_DAVICOM_PHY=y
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_NET_PCI is not set
++# CONFIG_B44 is not set
++CONFIG_FS_ENET=y
++# CONFIG_FS_ENET_HAS_SCC is not set
++CONFIG_FS_ENET_HAS_FCC=y
++# CONFIG_FS_ENET_MDIO_FCC is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++CONFIG_E1000=y
++CONFIG_E1000_NAPI=y
++# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
++# CONFIG_E1000E is not set
++# CONFIG_E1000E_ENABLED is not set
++# CONFIG_IP1000 is not set
++# CONFIG_IGB is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++# CONFIG_R8169 is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_VIA_VELOCITY is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++CONFIG_GIANFAR=y
++CONFIG_GFAR_NAPI=y
++# CONFIG_QLA3XXX is not set
++# CONFIG_ATL1 is not set
++CONFIG_NETDEV_10000=y
++# CONFIG_CHELSIO_T1 is not set
++# CONFIG_CHELSIO_T3 is not set
++# CONFIG_IXGBE is not set
++# CONFIG_IXGB is not set
++# CONFIG_S2IO is not set
++# CONFIG_MYRI10GE is not set
++# CONFIG_NETXEN_NIC is not set
++# CONFIG_NIU is not set
++# CONFIG_MLX4_CORE is not set
++# CONFIG_TEHUTI is not set
++# CONFIG_BNX2X is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_SERIAL_CPM=y
++CONFIG_SERIAL_CPM_CONSOLE=y
++CONFIG_SERIAL_CPM_SCC1=y
++CONFIG_SERIAL_CPM_SCC2=y
++# CONFIG_SERIAL_CPM_SCC3 is not set
++# CONFIG_SERIAL_CPM_SCC4 is not set
++# CONFIG_SERIAL_CPM_SMC1 is not set
++# CONFIG_SERIAL_CPM_SMC2 is not set
++# CONFIG_SERIAL_JSM is not set
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++CONFIG_HW_RANDOM=y
++# CONFIG_NVRAM is not set
++CONFIG_GEN_RTC=y
++# CONFIG_GEN_RTC_X is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++# CONFIG_I2C is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_SENSORS_I5K_AMB is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_F71882FG is not set
++# CONFIG_SENSORS_IT87 is not set
++# CONFIG_SENSORS_PC87360 is not set
++# CONFIG_SENSORS_PC87427 is not set
++# CONFIG_SENSORS_SIS5595 is not set
++# CONFIG_SENSORS_SMSC47M1 is not set
++# CONFIG_SENSORS_SMSC47B397 is not set
++# CONFIG_SENSORS_VIA686A is not set
++# CONFIG_SENSORS_VT1211 is not set
++# CONFIG_SENSORS_VT8231 is not set
++# CONFIG_SENSORS_W83627HF is not set
++# CONFIG_SENSORS_W83627EHF is not set
++# CONFIG_HWMON_DEBUG_CHIP is not set
++# CONFIG_THERMAL is not set
++# CONFIG_WATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++
++#
++# Graphics support
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=y
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++# CONFIG_USB is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++# CONFIG_RTC_CLASS is not set
++# CONFIG_DMADEVICES is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++# CONFIG_NFS_V3 is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++# CONFIG_MAC_PARTITION is not set
++# CONFIG_MSDOS_PARTITION is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++CONFIG_DEBUG_MUTEXES=y
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_DEBUG_STACKOVERFLOW is not set
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++# CONFIG_DEBUGGER is not set
++# CONFIG_KGDB_CONSOLE is not set
++# CONFIG_BDI_SWITCH is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_SEQIV is not set
++# CONFIG_CRYPTO_MANAGER is not set
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++# CONFIG_CRYPTO_MD5 is not set
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++# CONFIG_CRYPTO_CBC is not set
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++# CONFIG_CRYPTO_DES is not set
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_CRYPTO_DEV_HIFN_795X is not set
++# CONFIG_PPC_CLOCK is not set
++CONFIG_PPC_LIB_RHEAP=y
+--- /dev/null
++++ b/arch/powerpc/configs/85xx/mpc8568mds_defconfig
+@@ -0,0 +1,1117 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc7
++# Mon Mar 31 11:37:05 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++# CONFIG_6xx is not set
++CONFIG_PPC_85xx=y
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++# CONFIG_44x is not set
++# CONFIG_E200 is not set
++CONFIG_E500=y
++CONFIG_BOOKE=y
++CONFIG_FSL_BOOKE=y
++CONFIG_FSL_EMB_PERFMON=y
++# CONFIG_PHYS_64BIT is not set
++CONFIG_SPE=y
++# CONFIG_PPC_MM_SLICES is not set
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFAULT_UIMAGE=y
++# CONFIG_PPC_DCR_NATIVE is not set
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++# CONFIG_FAIR_GROUP_SCHED is not set
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++# CONFIG_KALLSYMS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++# CONFIG_EPOLL is not set
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++# CONFIG_KMOD is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++
++#
++# Platform support
++#
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++CONFIG_MPC85xx=y
++# CONFIG_MPC8540_ADS is not set
++# CONFIG_MPC8560_ADS is not set
++# CONFIG_MPC85xx_CDS is not set
++CONFIG_MPC85xx_MDS=y
++# CONFIG_MPC85xx_DS is not set
++# CONFIG_STX_GP3 is not set
++# CONFIG_TQM8540 is not set
++# CONFIG_TQM8541 is not set
++# CONFIG_TQM8555 is not set
++# CONFIG_TQM8560 is not set
++# CONFIG_SBC8548 is not set
++# CONFIG_SBC8560 is not set
++# CONFIG_IPIC is not set
++CONFIG_MPIC=y
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++CONFIG_QUICC_ENGINE=y
++# CONFIG_CPM2 is not set
++# CONFIG_FSL_ULI1575 is not set
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++CONFIG_MATH_EMULATION=y
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_PROC_DEVICETREE=y
++# CONFIG_CMDLINE_BOOL is not set
++# CONFIG_PM is not set
++CONFIG_SECCOMP=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_FSL_SOC=y
++CONFIG_FSL_PCI=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++# CONFIG_PCIEPORTBUS is not set
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++CONFIG_PCI_LEGACY=y
++# CONFIG_PCI_DEBUG is not set
++# CONFIG_PCCARD is not set
++# CONFIG_HOTPLUG_PCI is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_BOOT_LOAD=0x00800000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_FW_LOADER is not set
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++# CONFIG_MTD is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=32768
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_SGI_IOC4 is not set
++# CONFIG_TIFM_CORE is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++# CONFIG_BLK_DEV_SD is not set
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
++# CONFIG_SCSI_3W_9XXX is not set
++# CONFIG_SCSI_ACARD is not set
++# CONFIG_SCSI_AACRAID is not set
++# CONFIG_SCSI_AIC7XXX is not set
++# CONFIG_SCSI_AIC7XXX_OLD is not set
++# CONFIG_SCSI_AIC79XX is not set
++# CONFIG_SCSI_AIC94XX is not set
++# CONFIG_SCSI_DPT_I2O is not set
++# CONFIG_SCSI_ADVANSYS is not set
++# CONFIG_SCSI_ARCMSR is not set
++# CONFIG_MEGARAID_NEWGEN is not set
++# CONFIG_MEGARAID_LEGACY is not set
++# CONFIG_MEGARAID_SAS is not set
++# CONFIG_SCSI_HPTIOP is not set
++# CONFIG_SCSI_BUSLOGIC is not set
++# CONFIG_SCSI_DMX3191D is not set
++# CONFIG_SCSI_EATA is not set
++# CONFIG_SCSI_FUTURE_DOMAIN is not set
++# CONFIG_SCSI_GDTH is not set
++# CONFIG_SCSI_IPS is not set
++# CONFIG_SCSI_INITIO is not set
++# CONFIG_SCSI_INIA100 is not set
++# CONFIG_SCSI_MVSAS is not set
++# CONFIG_SCSI_STEX is not set
++# CONFIG_SCSI_SYM53C8XX_2 is not set
++# CONFIG_SCSI_QLOGIC_1280 is not set
++# CONFIG_SCSI_QLA_FC is not set
++# CONFIG_SCSI_QLA_ISCSI is not set
++# CONFIG_SCSI_LPFC is not set
++# CONFIG_SCSI_DC395x is not set
++# CONFIG_SCSI_DC390T is not set
++# CONFIG_SCSI_NSP32 is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_SCSI_SRP is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++CONFIG_MARVELL_PHY=y
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_NET_PCI is not set
++# CONFIG_B44 is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++# CONFIG_E1000 is not set
++# CONFIG_E1000E is not set
++# CONFIG_E1000E_ENABLED is not set
++# CONFIG_IP1000 is not set
++# CONFIG_IGB is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++# CONFIG_R8169 is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_VIA_VELOCITY is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++CONFIG_GIANFAR=y
++CONFIG_GFAR_NAPI=y
++# CONFIG_UCC_GETH is not set
++# CONFIG_QLA3XXX is not set
++# CONFIG_ATL1 is not set
++CONFIG_NETDEV_10000=y
++# CONFIG_CHELSIO_T1 is not set
++# CONFIG_CHELSIO_T3 is not set
++# CONFIG_IXGBE is not set
++# CONFIG_IXGB is not set
++# CONFIG_S2IO is not set
++# CONFIG_MYRI10GE is not set
++# CONFIG_NETXEN_NIC is not set
++# CONFIG_NIU is not set
++# CONFIG_MLX4_CORE is not set
++# CONFIG_TEHUTI is not set
++# CONFIG_BNX2X is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NET_FC is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_PCI=y
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++# CONFIG_SERIAL_8250_EXTENDED is not set
++CONFIG_SERIAL_8250_SHARE_IRQ=y
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_JSM is not set
++# CONFIG_SERIAL_OF_PLATFORM is not set
++# CONFIG_SERIAL_QE is not set
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++CONFIG_HW_RANDOM=y
++# CONFIG_NVRAM is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=y
++
++#
++# I2C Algorithms
++#
++# CONFIG_I2C_ALGOBIT is not set
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++# CONFIG_I2C_ALI1535 is not set
++# CONFIG_I2C_ALI1563 is not set
++# CONFIG_I2C_ALI15X3 is not set
++# CONFIG_I2C_AMD756 is not set
++# CONFIG_I2C_AMD8111 is not set
++# CONFIG_I2C_I801 is not set
++# CONFIG_I2C_I810 is not set
++# CONFIG_I2C_PIIX4 is not set
++CONFIG_I2C_MPC=y
++# CONFIG_I2C_NFORCE2 is not set
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_PROSAVAGE is not set
++# CONFIG_I2C_SAVAGE4 is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_SIS5595 is not set
++# CONFIG_I2C_SIS630 is not set
++# CONFIG_I2C_SIS96X is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_VIA is not set
++# CONFIG_I2C_VIAPRO is not set
++# CONFIG_I2C_VOODOO3 is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_SENSORS_AD7418 is not set
++# CONFIG_SENSORS_ADM1021 is not set
++# CONFIG_SENSORS_ADM1025 is not set
++# CONFIG_SENSORS_ADM1026 is not set
++# CONFIG_SENSORS_ADM1029 is not set
++# CONFIG_SENSORS_ADM1031 is not set
++# CONFIG_SENSORS_ADM9240 is not set
++# CONFIG_SENSORS_ADT7470 is not set
++# CONFIG_SENSORS_ADT7473 is not set
++# CONFIG_SENSORS_ATXP1 is not set
++# CONFIG_SENSORS_DS1621 is not set
++# CONFIG_SENSORS_I5K_AMB is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_F71882FG is not set
++# CONFIG_SENSORS_F75375S is not set
++# CONFIG_SENSORS_GL518SM is not set
++# CONFIG_SENSORS_GL520SM is not set
++# CONFIG_SENSORS_IT87 is not set
++# CONFIG_SENSORS_LM63 is not set
++# CONFIG_SENSORS_LM75 is not set
++# CONFIG_SENSORS_LM77 is not set
++# CONFIG_SENSORS_LM78 is not set
++# CONFIG_SENSORS_LM80 is not set
++# CONFIG_SENSORS_LM83 is not set
++# CONFIG_SENSORS_LM85 is not set
++# CONFIG_SENSORS_LM87 is not set
++# CONFIG_SENSORS_LM90 is not set
++# CONFIG_SENSORS_LM92 is not set
++# CONFIG_SENSORS_LM93 is not set
++# CONFIG_SENSORS_MAX1619 is not set
++# CONFIG_SENSORS_MAX6650 is not set
++# CONFIG_SENSORS_PC87360 is not set
++# CONFIG_SENSORS_PC87427 is not set
++# CONFIG_SENSORS_SIS5595 is not set
++# CONFIG_SENSORS_DME1737 is not set
++# CONFIG_SENSORS_SMSC47M1 is not set
++# CONFIG_SENSORS_SMSC47M192 is not set
++# CONFIG_SENSORS_SMSC47B397 is not set
++# CONFIG_SENSORS_ADS7828 is not set
++# CONFIG_SENSORS_THMC50 is not set
++# CONFIG_SENSORS_VIA686A is not set
++# CONFIG_SENSORS_VT1211 is not set
++# CONFIG_SENSORS_VT8231 is not set
++# CONFIG_SENSORS_W83781D is not set
++# CONFIG_SENSORS_W83791D is not set
++# CONFIG_SENSORS_W83792D is not set
++# CONFIG_SENSORS_W83793 is not set
++# CONFIG_SENSORS_W83L785TS is not set
++# CONFIG_SENSORS_W83L786NG is not set
++# CONFIG_SENSORS_W83627HF is not set
++# CONFIG_SENSORS_W83627EHF is not set
++# CONFIG_HWMON_DEBUG_CHIP is not set
++# CONFIG_THERMAL is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++# CONFIG_BOOKE_WDT is not set
++
++#
++# PCI-based Watchdog Cards
++#
++# CONFIG_PCIPCWATCHDOG is not set
++# CONFIG_WDTPCI is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++
++#
++# Graphics support
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=m
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++# CONFIG_USB is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++CONFIG_RTC_DRV_DS1374=y
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++# CONFIG_RTC_DRV_S35390A is not set
++
++#
++# SPI RTC drivers
++#
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++# CONFIG_DMADEVICES is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++CONFIG_NFS_V4=y
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++CONFIG_SUNRPC_GSS=y
++# CONFIG_SUNRPC_BIND34 is not set
++CONFIG_RPCSEC_GSS_KRB5=y
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++# CONFIG_MAC_PARTITION is not set
++# CONFIG_MSDOS_PARTITION is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_DEBUG_STACKOVERFLOW is not set
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++CONFIG_DEBUGGER=y
++# CONFIG_XMON is not set
++# CONFIG_BDI_SWITCH is not set
++CONFIG_PPC_EARLY_DEBUG=y
++# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
++# CONFIG_PPC_EARLY_DEBUG_G5 is not set
++# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
++# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
++# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
++# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
++# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
++# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
++# CONFIG_PPC_EARLY_DEBUG_44x is not set
++# CONFIG_PPC_EARLY_DEBUG_40x is not set
++# CONFIG_PPC_EARLY_DEBUG_CPM is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++# CONFIG_CRYPTO_SEQIV is not set
++CONFIG_CRYPTO_MANAGER=y
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++CONFIG_CRYPTO_ECB=m
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=m
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_CRYPTO_DEV_HIFN_795X is not set
++# CONFIG_PPC_CLOCK is not set
++CONFIG_PPC_LIB_RHEAP=y
+--- /dev/null
++++ b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
+@@ -0,0 +1,1549 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc7
++# Mon Mar 31 11:37:06 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++# CONFIG_6xx is not set
++CONFIG_PPC_85xx=y
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++# CONFIG_44x is not set
++# CONFIG_E200 is not set
++CONFIG_E500=y
++CONFIG_BOOKE=y
++CONFIG_FSL_BOOKE=y
++CONFIG_FSL_EMB_PERFMON=y
++# CONFIG_PHYS_64BIT is not set
++CONFIG_SPE=y
++# CONFIG_PPC_MM_SLICES is not set
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFAULT_UIMAGE=y
++# CONFIG_PPC_DCR_NATIVE is not set
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_BSD_PROCESS_ACCT=y
++# CONFIG_BSD_PROCESS_ACCT_V3 is not set
++# CONFIG_TASKSTATS is not set
++CONFIG_AUDIT=y
++# CONFIG_AUDITSYSCALL is not set
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++# CONFIG_FAIR_GROUP_SCHED is not set
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++CONFIG_KALLSYMS_ALL=y
++CONFIG_KALLSYMS_EXTRA_PASS=y
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODULE_FORCE_UNLOAD=y
++CONFIG_MODVERSIONS=y
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++CONFIG_BLOCK=y
++CONFIG_LBD=y
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
++CONFIG_CLASSIC_RCU=y
++
++#
++# Platform support
++#
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++CONFIG_MPC85xx=y
++# CONFIG_MPC8540_ADS is not set
++# CONFIG_MPC8560_ADS is not set
++# CONFIG_MPC85xx_CDS is not set
++# CONFIG_MPC85xx_MDS is not set
++CONFIG_MPC85xx_DS=y
++# CONFIG_STX_GP3 is not set
++# CONFIG_TQM8540 is not set
++# CONFIG_TQM8541 is not set
++# CONFIG_TQM8555 is not set
++# CONFIG_TQM8560 is not set
++# CONFIG_SBC8548 is not set
++# CONFIG_SBC8560 is not set
++# CONFIG_IPIC is not set
++CONFIG_MPIC=y
++# CONFIG_MPIC_WEIRD is not set
++CONFIG_PPC_I8259=y
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++# CONFIG_CPM2 is not set
++CONFIG_FSL_ULI1575=y
++
++#
++# Kernel options
++#
++CONFIG_HIGHMEM=y
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_BINFMT_ELF=y
++CONFIG_BINFMT_MISC=m
++CONFIG_MATH_EMULATION=y
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_PROC_DEVICETREE=y
++# CONFIG_CMDLINE_BOOL is not set
++# CONFIG_PM is not set
++CONFIG_SECCOMP=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_GENERIC_ISA_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_FSL_SOC=y
++CONFIG_FSL_PCI=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++# CONFIG_PCIEPORTBUS is not set
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++CONFIG_PCI_LEGACY=y
++# CONFIG_PCI_DEBUG is not set
++# CONFIG_PCCARD is not set
++# CONFIG_HOTPLUG_PCI is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_BOOT_LOAD=0x00800000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++CONFIG_XFRM_USER=y
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++CONFIG_NET_KEY=m
++# CONFIG_NET_KEY_MIGRATE is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_IP_ADVANCED_ROUTER=y
++CONFIG_ASK_IP_FIB_HASH=y
++# CONFIG_IP_FIB_TRIE is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_MULTIPLE_TABLES=y
++CONFIG_IP_ROUTE_MULTIPATH=y
++CONFIG_IP_ROUTE_VERBOSE=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++CONFIG_IP_PNP_RARP=y
++CONFIG_NET_IPIP=y
++CONFIG_NET_IPGRE=y
++CONFIG_NET_IPGRE_BROADCAST=y
++CONFIG_IP_MROUTE=y
++CONFIG_IP_PIMSM_V1=y
++CONFIG_IP_PIMSM_V2=y
++CONFIG_ARPD=y
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++CONFIG_INET_TUNNEL=y
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++CONFIG_IPV6=y
++# CONFIG_IPV6_PRIVACY is not set
++# CONFIG_IPV6_ROUTER_PREF is not set
++# CONFIG_IPV6_OPTIMISTIC_DAD is not set
++# CONFIG_INET6_AH is not set
++# CONFIG_INET6_ESP is not set
++# CONFIG_INET6_IPCOMP is not set
++# CONFIG_IPV6_MIP6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++CONFIG_INET6_XFRM_MODE_TRANSPORT=y
++CONFIG_INET6_XFRM_MODE_TUNNEL=y
++CONFIG_INET6_XFRM_MODE_BEET=y
++# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
++CONFIG_IPV6_SIT=y
++# CONFIG_IPV6_TUNNEL is not set
++# CONFIG_IPV6_MULTIPLE_TABLES is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++CONFIG_IP_SCTP=m
++# CONFIG_SCTP_DBG_MSG is not set
++# CONFIG_SCTP_DBG_OBJCNT is not set
++# CONFIG_SCTP_HMAC_NONE is not set
++# CONFIG_SCTP_HMAC_SHA1 is not set
++CONFIG_SCTP_HMAC_MD5=y
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++CONFIG_FIB_RULES=y
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++# CONFIG_MTD is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++CONFIG_BLK_DEV_NBD=y
++# CONFIG_BLK_DEV_SX8 is not set
++# CONFIG_BLK_DEV_UB is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=131072
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_SGI_IOC4 is not set
++# CONFIG_TIFM_CORE is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=y
++CONFIG_CHR_DEV_ST=y
++# CONFIG_CHR_DEV_OSST is not set
++CONFIG_BLK_DEV_SR=y
++# CONFIG_BLK_DEV_SR_VENDOR is not set
++CONFIG_CHR_DEV_SG=y
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++CONFIG_SCSI_MULTI_LUN=y
++# CONFIG_SCSI_CONSTANTS is not set
++CONFIG_SCSI_LOGGING=y
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
++# CONFIG_SCSI_3W_9XXX is not set
++# CONFIG_SCSI_ACARD is not set
++# CONFIG_SCSI_AACRAID is not set
++# CONFIG_SCSI_AIC7XXX is not set
++# CONFIG_SCSI_AIC7XXX_OLD is not set
++# CONFIG_SCSI_AIC79XX is not set
++# CONFIG_SCSI_AIC94XX is not set
++# CONFIG_SCSI_DPT_I2O is not set
++# CONFIG_SCSI_ADVANSYS is not set
++# CONFIG_SCSI_ARCMSR is not set
++# CONFIG_MEGARAID_NEWGEN is not set
++# CONFIG_MEGARAID_LEGACY is not set
++# CONFIG_MEGARAID_SAS is not set
++# CONFIG_SCSI_HPTIOP is not set
++# CONFIG_SCSI_BUSLOGIC is not set
++# CONFIG_SCSI_DMX3191D is not set
++# CONFIG_SCSI_EATA is not set
++# CONFIG_SCSI_FUTURE_DOMAIN is not set
++# CONFIG_SCSI_GDTH is not set
++# CONFIG_SCSI_IPS is not set
++# CONFIG_SCSI_INITIO is not set
++# CONFIG_SCSI_INIA100 is not set
++# CONFIG_SCSI_MVSAS is not set
++# CONFIG_SCSI_STEX is not set
++# CONFIG_SCSI_SYM53C8XX_2 is not set
++# CONFIG_SCSI_IPR is not set
++# CONFIG_SCSI_QLOGIC_1280 is not set
++# CONFIG_SCSI_QLA_FC is not set
++# CONFIG_SCSI_QLA_ISCSI is not set
++# CONFIG_SCSI_LPFC is not set
++# CONFIG_SCSI_DC395x is not set
++# CONFIG_SCSI_DC390T is not set
++# CONFIG_SCSI_NSP32 is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_SCSI_SRP is not set
++CONFIG_ATA=y
++# CONFIG_ATA_NONSTANDARD is not set
++CONFIG_SATA_AHCI=y
++# CONFIG_SATA_SVW is not set
++# CONFIG_ATA_PIIX is not set
++# CONFIG_SATA_MV is not set
++# CONFIG_SATA_NV is not set
++# CONFIG_PDC_ADMA is not set
++# CONFIG_SATA_QSTOR is not set
++# CONFIG_SATA_PROMISE is not set
++# CONFIG_SATA_SX4 is not set
++# CONFIG_SATA_SIL is not set
++# CONFIG_SATA_SIL24 is not set
++# CONFIG_SATA_SIS is not set
++# CONFIG_SATA_ULI is not set
++# CONFIG_SATA_VIA is not set
++# CONFIG_SATA_VITESSE is not set
++# CONFIG_SATA_INIC162X is not set
++# CONFIG_SATA_FSL is not set
++CONFIG_PATA_ALI=y
++# CONFIG_PATA_AMD is not set
++# CONFIG_PATA_ARTOP is not set
++# CONFIG_PATA_ATIIXP is not set
++# CONFIG_PATA_CMD640_PCI is not set
++# CONFIG_PATA_CMD64X is not set
++# CONFIG_PATA_CS5520 is not set
++# CONFIG_PATA_CS5530 is not set
++# CONFIG_PATA_CYPRESS is not set
++# CONFIG_PATA_EFAR is not set
++# CONFIG_ATA_GENERIC is not set
++# CONFIG_PATA_HPT366 is not set
++# CONFIG_PATA_HPT37X is not set
++# CONFIG_PATA_HPT3X2N is not set
++# CONFIG_PATA_HPT3X3 is not set
++# CONFIG_PATA_IT821X is not set
++# CONFIG_PATA_IT8213 is not set
++# CONFIG_PATA_JMICRON is not set
++# CONFIG_PATA_TRIFLEX is not set
++# CONFIG_PATA_MARVELL is not set
++# CONFIG_PATA_MPIIX is not set
++# CONFIG_PATA_OLDPIIX is not set
++# CONFIG_PATA_NETCELL is not set
++# CONFIG_PATA_NINJA32 is not set
++# CONFIG_PATA_NS87410 is not set
++# CONFIG_PATA_NS87415 is not set
++# CONFIG_PATA_OPTI is not set
++# CONFIG_PATA_OPTIDMA is not set
++# CONFIG_PATA_PDC_OLD is not set
++# CONFIG_PATA_RADISYS is not set
++# CONFIG_PATA_RZ1000 is not set
++# CONFIG_PATA_SC1200 is not set
++# CONFIG_PATA_SERVERWORKS is not set
++# CONFIG_PATA_PDC2027X is not set
++# CONFIG_PATA_SIL680 is not set
++# CONFIG_PATA_SIS is not set
++# CONFIG_PATA_VIA is not set
++# CONFIG_PATA_WINBOND is not set
++# CONFIG_PATA_PLATFORM is not set
++# CONFIG_MD is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++CONFIG_DUMMY=y
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++CONFIG_VITESSE_PHY=y
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_NET_PCI is not set
++# CONFIG_B44 is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++# CONFIG_E1000 is not set
++# CONFIG_E1000E is not set
++# CONFIG_E1000E_ENABLED is not set
++# CONFIG_IP1000 is not set
++# CONFIG_IGB is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++# CONFIG_R8169 is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_VIA_VELOCITY is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++CONFIG_GIANFAR=y
++CONFIG_GFAR_NAPI=y
++# CONFIG_QLA3XXX is not set
++# CONFIG_ATL1 is not set
++CONFIG_NETDEV_10000=y
++# CONFIG_CHELSIO_T1 is not set
++# CONFIG_CHELSIO_T3 is not set
++# CONFIG_IXGBE is not set
++# CONFIG_IXGB is not set
++# CONFIG_S2IO is not set
++# CONFIG_MYRI10GE is not set
++# CONFIG_NETXEN_NIC is not set
++# CONFIG_NIU is not set
++# CONFIG_MLX4_CORE is not set
++# CONFIG_TEHUTI is not set
++# CONFIG_BNX2X is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NET_FC is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++CONFIG_SERIO=y
++CONFIG_SERIO_I8042=y
++CONFIG_SERIO_SERPORT=y
++# CONFIG_SERIO_PCIPS2 is not set
++CONFIG_SERIO_LIBPS2=y
++# CONFIG_SERIO_RAW is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_PCI=y
++CONFIG_SERIAL_8250_NR_UARTS=2
++CONFIG_SERIAL_8250_RUNTIME_UARTS=2
++CONFIG_SERIAL_8250_EXTENDED=y
++CONFIG_SERIAL_8250_MANY_PORTS=y
++CONFIG_SERIAL_8250_SHARE_IRQ=y
++CONFIG_SERIAL_8250_DETECT_IRQ=y
++CONFIG_SERIAL_8250_RSA=y
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_JSM is not set
++# CONFIG_SERIAL_OF_PLATFORM is not set
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++CONFIG_NVRAM=y
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++# CONFIG_I2C_CHARDEV is not set
++
++#
++# I2C Algorithms
++#
++# CONFIG_I2C_ALGOBIT is not set
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++# CONFIG_I2C_ALI1535 is not set
++# CONFIG_I2C_ALI1563 is not set
++# CONFIG_I2C_ALI15X3 is not set
++# CONFIG_I2C_AMD756 is not set
++# CONFIG_I2C_AMD8111 is not set
++# CONFIG_I2C_I801 is not set
++# CONFIG_I2C_I810 is not set
++# CONFIG_I2C_PIIX4 is not set
++CONFIG_I2C_MPC=y
++# CONFIG_I2C_NFORCE2 is not set
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_PROSAVAGE is not set
++# CONFIG_I2C_SAVAGE4 is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_SIS5595 is not set
++# CONFIG_I2C_SIS630 is not set
++# CONFIG_I2C_SIS96X is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_TINY_USB is not set
++# CONFIG_I2C_VIA is not set
++# CONFIG_I2C_VIAPRO is not set
++# CONFIG_I2C_VOODOO3 is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++CONFIG_SENSORS_EEPROM=y
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
++# CONFIG_WATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++CONFIG_DVB_CORE=m
++# CONFIG_DVB_CORE_ATTACH is not set
++CONFIG_DVB_CAPTURE_DRIVERS=y
++
++#
++# Supported SAA7146 based PCI Adapters
++#
++# CONFIG_TTPCI_EEPROM is not set
++# CONFIG_DVB_BUDGET_CORE is not set
++
++#
++# Supported USB Adapters
++#
++# CONFIG_DVB_USB is not set
++# CONFIG_DVB_TTUSB_BUDGET is not set
++# CONFIG_DVB_TTUSB_DEC is not set
++# CONFIG_DVB_CINERGYT2 is not set
++
++#
++# Supported FlexCopII (B2C2) Adapters
++#
++# CONFIG_DVB_B2C2_FLEXCOP is not set
++
++#
++# Supported BT878 Adapters
++#
++
++#
++# Supported Pluto2 Adapters
++#
++# CONFIG_DVB_PLUTO2 is not set
++
++#
++# Supported DVB Frontends
++#
++
++#
++# Customise DVB Frontends
++#
++# CONFIG_DVB_FE_CUSTOMISE is not set
++
++#
++# DVB-S (satellite) frontends
++#
++# CONFIG_DVB_STV0299 is not set
++# CONFIG_DVB_CX24110 is not set
++# CONFIG_DVB_CX24123 is not set
++# CONFIG_DVB_TDA8083 is not set
++# CONFIG_DVB_MT312 is not set
++# CONFIG_DVB_VES1X93 is not set
++# CONFIG_DVB_S5H1420 is not set
++# CONFIG_DVB_TDA10086 is not set
++
++#
++# DVB-T (terrestrial) frontends
++#
++# CONFIG_DVB_SP8870 is not set
++# CONFIG_DVB_SP887X is not set
++# CONFIG_DVB_CX22700 is not set
++# CONFIG_DVB_CX22702 is not set
++# CONFIG_DVB_L64781 is not set
++# CONFIG_DVB_TDA1004X is not set
++# CONFIG_DVB_NXT6000 is not set
++# CONFIG_DVB_MT352 is not set
++# CONFIG_DVB_ZL10353 is not set
++# CONFIG_DVB_DIB3000MB is not set
++# CONFIG_DVB_DIB3000MC is not set
++# CONFIG_DVB_DIB7000M is not set
++# CONFIG_DVB_DIB7000P is not set
++
++#
++# DVB-C (cable) frontends
++#
++# CONFIG_DVB_VES1820 is not set
++# CONFIG_DVB_TDA10021 is not set
++# CONFIG_DVB_TDA10023 is not set
++# CONFIG_DVB_STV0297 is not set
++
++#
++# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
++#
++# CONFIG_DVB_NXT200X is not set
++# CONFIG_DVB_OR51211 is not set
++# CONFIG_DVB_OR51132 is not set
++# CONFIG_DVB_BCM3510 is not set
++# CONFIG_DVB_LGDT330X is not set
++# CONFIG_DVB_S5H1409 is not set
++
++#
++# Tuners/PLL support
++#
++# CONFIG_DVB_PLL is not set
++# CONFIG_DVB_TDA826X is not set
++# CONFIG_DVB_TDA827X is not set
++# CONFIG_DVB_TDA18271 is not set
++# CONFIG_DVB_TUNER_QT1010 is not set
++# CONFIG_DVB_TUNER_MT2060 is not set
++# CONFIG_DVB_TUNER_MT2266 is not set
++# CONFIG_DVB_TUNER_MT2131 is not set
++# CONFIG_DVB_TUNER_DIB0070 is not set
++# CONFIG_DVB_TUNER_XC5000 is not set
++
++#
++# Miscellaneous devices
++#
++# CONFIG_DVB_LNBP21 is not set
++# CONFIG_DVB_ISL6421 is not set
++# CONFIG_DVB_TUA6100 is not set
++CONFIG_DAB=y
++# CONFIG_USB_DABUSB is not set
++
++#
++# Graphics support
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=y
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Console display driver support
++#
++CONFIG_VGA_CONSOLE=y
++# CONFIG_VGACON_SOFT_SCROLLBACK is not set
++CONFIG_DUMMY_CONSOLE=y
++
++#
++# Sound
++#
++CONFIG_SOUND=y
++
++#
++# Advanced Linux Sound Architecture
++#
++CONFIG_SND=y
++CONFIG_SND_TIMER=y
++CONFIG_SND_PCM=y
++# CONFIG_SND_SEQUENCER is not set
++# CONFIG_SND_MIXER_OSS is not set
++# CONFIG_SND_PCM_OSS is not set
++# CONFIG_SND_DYNAMIC_MINORS is not set
++CONFIG_SND_SUPPORT_OLD_API=y
++CONFIG_SND_VERBOSE_PROCFS=y
++# CONFIG_SND_VERBOSE_PRINTK is not set
++# CONFIG_SND_DEBUG is not set
++
++#
++# Generic devices
++#
++CONFIG_SND_AC97_CODEC=y
++# CONFIG_SND_DUMMY is not set
++# CONFIG_SND_MTPAV is not set
++# CONFIG_SND_SERIAL_U16550 is not set
++# CONFIG_SND_MPU401 is not set
++
++#
++# PCI devices
++#
++# CONFIG_SND_AD1889 is not set
++# CONFIG_SND_ALS300 is not set
++# CONFIG_SND_ALS4000 is not set
++# CONFIG_SND_ALI5451 is not set
++# CONFIG_SND_ATIIXP is not set
++# CONFIG_SND_ATIIXP_MODEM is not set
++# CONFIG_SND_AU8810 is not set
++# CONFIG_SND_AU8820 is not set
++# CONFIG_SND_AU8830 is not set
++# CONFIG_SND_AZT3328 is not set
++# CONFIG_SND_BT87X is not set
++# CONFIG_SND_CA0106 is not set
++# CONFIG_SND_CMIPCI is not set
++# CONFIG_SND_OXYGEN is not set
++# CONFIG_SND_CS4281 is not set
++# CONFIG_SND_CS46XX is not set
++# CONFIG_SND_CS5530 is not set
++# CONFIG_SND_DARLA20 is not set
++# CONFIG_SND_GINA20 is not set
++# CONFIG_SND_LAYLA20 is not set
++# CONFIG_SND_DARLA24 is not set
++# CONFIG_SND_GINA24 is not set
++# CONFIG_SND_LAYLA24 is not set
++# CONFIG_SND_MONA is not set
++# CONFIG_SND_MIA is not set
++# CONFIG_SND_ECHO3G is not set
++# CONFIG_SND_INDIGO is not set
++# CONFIG_SND_INDIGOIO is not set
++# CONFIG_SND_INDIGODJ is not set
++# CONFIG_SND_EMU10K1 is not set
++# CONFIG_SND_EMU10K1X is not set
++# CONFIG_SND_ENS1370 is not set
++# CONFIG_SND_ENS1371 is not set
++# CONFIG_SND_ES1938 is not set
++# CONFIG_SND_ES1968 is not set
++# CONFIG_SND_FM801 is not set
++# CONFIG_SND_HDA_INTEL is not set
++# CONFIG_SND_HDSP is not set
++# CONFIG_SND_HDSPM is not set
++# CONFIG_SND_HIFIER is not set
++# CONFIG_SND_ICE1712 is not set
++# CONFIG_SND_ICE1724 is not set
++CONFIG_SND_INTEL8X0=y
++# CONFIG_SND_INTEL8X0M is not set
++# CONFIG_SND_KORG1212 is not set
++# CONFIG_SND_MAESTRO3 is not set
++# CONFIG_SND_MIXART is not set
++# CONFIG_SND_NM256 is not set
++# CONFIG_SND_PCXHR is not set
++# CONFIG_SND_RIPTIDE is not set
++# CONFIG_SND_RME32 is not set
++# CONFIG_SND_RME96 is not set
++# CONFIG_SND_RME9652 is not set
++# CONFIG_SND_SONICVIBES is not set
++# CONFIG_SND_TRIDENT is not set
++# CONFIG_SND_VIA82XX is not set
++# CONFIG_SND_VIA82XX_MODEM is not set
++# CONFIG_SND_VIRTUOSO is not set
++# CONFIG_SND_VX222 is not set
++# CONFIG_SND_YMFPCI is not set
++# CONFIG_SND_AC97_POWER_SAVE is not set
++
++#
++# ALSA PowerMac devices
++#
++
++#
++# ALSA PowerPC devices
++#
++
++#
++# USB devices
++#
++# CONFIG_SND_USB_AUDIO is not set
++# CONFIG_SND_USB_USX2Y is not set
++# CONFIG_SND_USB_CAIAQ is not set
++
++#
++# System on Chip audio support
++#
++# CONFIG_SND_SOC is not set
++
++#
++# SoC Audio support for SuperH
++#
++
++#
++# ALSA SoC audio for Freescale SOCs
++#
++
++#
++# Open Sound System
++#
++# CONFIG_SOUND_PRIME is not set
++CONFIG_AC97_BUS=y
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
++
++#
++# USB Input Devices
++#
++CONFIG_USB_HID=y
++# CONFIG_USB_HIDINPUT_POWERBOOK is not set
++# CONFIG_HID_FF is not set
++# CONFIG_USB_HIDDEV is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
++
++#
++# Miscellaneous USB options
++#
++CONFIG_USB_DEVICEFS=y
++CONFIG_USB_DEVICE_CLASS=y
++# CONFIG_USB_DYNAMIC_MINORS is not set
++# CONFIG_USB_OTG is not set
++
++#
++# USB Host Controller Drivers
++#
++CONFIG_USB_EHCI_HCD=y
++# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
++# CONFIG_USB_EHCI_TT_NEWSCHED is not set
++# CONFIG_USB_EHCI_FSL is not set
++CONFIG_USB_EHCI_HCD_PPC_OF=y
++# CONFIG_USB_ISP116X_HCD is not set
++CONFIG_USB_OHCI_HCD=y
++CONFIG_USB_OHCI_HCD_PPC_OF=y
++CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
++CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
++CONFIG_USB_OHCI_HCD_PCI=y
++CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
++CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
++CONFIG_USB_OHCI_LITTLE_ENDIAN=y
++# CONFIG_USB_UHCI_HCD is not set
++# CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
++
++#
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++# CONFIG_USB_PRINTER is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# may also be needed; see USB_STORAGE Help for more information
++#
++CONFIG_USB_STORAGE=y
++# CONFIG_USB_STORAGE_DEBUG is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_ISD200 is not set
++# CONFIG_USB_STORAGE_DPCM is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++CONFIG_USB_MON=y
++
++#
++# USB port drivers
++#
++# CONFIG_USB_SERIAL is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_AUERSWALD is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_PHIDGET is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_SISUSBVGA is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++# CONFIG_USB_TEST is not set
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++# CONFIG_RTC_DRV_S35390A is not set
++
++#
++# SPI RTC drivers
++#
++
++#
++# Platform RTC drivers
++#
++CONFIG_RTC_DRV_CMOS=y
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++# CONFIG_DMADEVICES is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++CONFIG_ISO9660_FS=m
++CONFIG_JOLIET=y
++CONFIG_ZISOFS=y
++CONFIG_UDF_FS=m
++CONFIG_UDF_NLS=y
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++CONFIG_MSDOS_FS=m
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++CONFIG_NTFS_FS=y
++# CONFIG_NTFS_DEBUG is not set
++# CONFIG_NTFS_RW is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++CONFIG_ADFS_FS=m
++# CONFIG_ADFS_FS_RW is not set
++CONFIG_AFFS_FS=m
++CONFIG_HFS_FS=m
++CONFIG_HFSPLUS_FS=m
++CONFIG_BEFS_FS=m
++# CONFIG_BEFS_DEBUG is not set
++CONFIG_BFS_FS=m
++CONFIG_EFS_FS=m
++CONFIG_CRAMFS=y
++CONFIG_VXFS_FS=m
++# CONFIG_MINIX_FS is not set
++CONFIG_HPFS_FS=m
++CONFIG_QNX4FS_FS=m
++# CONFIG_ROMFS_FS is not set
++CONFIG_SYSV_FS=m
++CONFIG_UFS_FS=m
++# CONFIG_UFS_FS_WRITE is not set
++# CONFIG_UFS_DEBUG is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++CONFIG_NFS_V4=y
++# CONFIG_NFS_DIRECTIO is not set
++CONFIG_NFSD=y
++# CONFIG_NFSD_V3 is not set
++CONFIG_NFSD_TCP=y
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_EXPORTFS=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++CONFIG_SUNRPC_GSS=y
++# CONFIG_SUNRPC_BIND34 is not set
++CONFIG_RPCSEC_GSS_KRB5=y
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++CONFIG_MAC_PARTITION=y
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_BSD_DISKLABEL is not set
++# CONFIG_MINIX_SUBPARTITION is not set
++# CONFIG_SOLARIS_X86_PARTITION is not set
++# CONFIG_UNIXWARE_DISKLABEL is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++# CONFIG_NLS_CODEPAGE_437 is not set
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++# CONFIG_NLS_CODEPAGE_850 is not set
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++# CONFIG_NLS_ISO8859_1 is not set
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++CONFIG_NLS_UTF8=m
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++CONFIG_LIBCRC32C=m
++CONFIG_ZLIB_INFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++# CONFIG_DEBUG_HIGHMEM is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++CONFIG_DEBUG_INFO=y
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_DEBUG_STACKOVERFLOW is not set
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++# CONFIG_DEBUGGER is not set
++# CONFIG_BDI_SWITCH is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++# CONFIG_CRYPTO_SEQIV is not set
++CONFIG_CRYPTO_HASH=y
++CONFIG_CRYPTO_MANAGER=y
++CONFIG_CRYPTO_HMAC=y
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++CONFIG_CRYPTO_SHA1=m
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=m
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_CRYPTO_DEV_HIFN_795X is not set
++# CONFIG_PPC_CLOCK is not set
+--- /dev/null
++++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
+@@ -0,0 +1,935 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc6
++# Mon Mar 24 08:48:30 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++# CONFIG_6xx is not set
++CONFIG_PPC_85xx=y
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++# CONFIG_44x is not set
++# CONFIG_E200 is not set
++CONFIG_E500=y
++CONFIG_BOOKE=y
++CONFIG_FSL_BOOKE=y
++CONFIG_FSL_EMB_PERFMON=y
++# CONFIG_PHYS_64BIT is not set
++CONFIG_SPE=y
++# CONFIG_PPC_MM_SLICES is not set
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFAULT_UIMAGE=y
++# CONFIG_PPC_DCR_NATIVE is not set
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++# CONFIG_FAIR_GROUP_SCHED is not set
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++# CONFIG_MODULES is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++
++#
++# Platform support
++#
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++CONFIG_MPC85xx=y
++# CONFIG_MPC8540_ADS is not set
++# CONFIG_MPC8560_ADS is not set
++CONFIG_MPC85xx_CDS=y
++# CONFIG_MPC85xx_MDS is not set
++# CONFIG_MPC85xx_DS is not set
++# CONFIG_STX_GP3 is not set
++# CONFIG_TQM8540 is not set
++# CONFIG_TQM8541 is not set
++# CONFIG_TQM8555 is not set
++# CONFIG_TQM8560 is not set
++# CONFIG_SBC8548 is not set
++# CONFIG_SBC8560 is not set
++# CONFIG_IPIC is not set
++CONFIG_MPIC=y
++# CONFIG_MPIC_WEIRD is not set
++CONFIG_PPC_I8259=y
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++# CONFIG_CPM2 is not set
++# CONFIG_FSL_ULI1575 is not set
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_BINFMT_ELF=y
++CONFIG_BINFMT_MISC=y
++CONFIG_MATH_EMULATION=y
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_PROC_DEVICETREE=y
++# CONFIG_CMDLINE_BOOL is not set
++# CONFIG_PM is not set
++# CONFIG_SECCOMP is not set
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_FSL_SOC=y
++CONFIG_FSL_PCI=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++# CONFIG_PCIEPORTBUS is not set
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++CONFIG_PCI_LEGACY=y
++# CONFIG_PCI_DEBUG is not set
++# CONFIG_PCCARD is not set
++# CONFIG_HOTPLUG_PCI is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_BOOT_LOAD=0x00800000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++CONFIG_XFRM_USER=y
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_FW_LOADER is not set
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++# CONFIG_MTD is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=32768
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_SGI_IOC4 is not set
++# CONFIG_TIFM_CORE is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++CONFIG_IDE=y
++CONFIG_IDE_MAX_HWIFS=4
++CONFIG_BLK_DEV_IDE=y
++
++#
++# Please see Documentation/ide/ide.txt for help/info on IDE drives
++#
++# CONFIG_BLK_DEV_IDE_SATA is not set
++# CONFIG_BLK_DEV_IDEDISK is not set
++# CONFIG_IDEDISK_MULTI_MODE is not set
++# CONFIG_BLK_DEV_IDECD is not set
++# CONFIG_BLK_DEV_IDETAPE is not set
++# CONFIG_BLK_DEV_IDEFLOPPY is not set
++# CONFIG_IDE_TASK_IOCTL is not set
++CONFIG_IDE_PROC_FS=y
++
++#
++# IDE chipset support/bugfixes
++#
++CONFIG_IDE_GENERIC=y
++# CONFIG_BLK_DEV_PLATFORM is not set
++CONFIG_BLK_DEV_IDEDMA_SFF=y
++
++#
++# PCI IDE chipsets support
++#
++CONFIG_BLK_DEV_IDEPCI=y
++CONFIG_IDEPCI_PCIBUS_ORDER=y
++# CONFIG_BLK_DEV_OFFBOARD is not set
++CONFIG_BLK_DEV_GENERIC=y
++# CONFIG_BLK_DEV_OPTI621 is not set
++CONFIG_BLK_DEV_IDEDMA_PCI=y
++# CONFIG_BLK_DEV_AEC62XX is not set
++# CONFIG_BLK_DEV_ALI15X3 is not set
++# CONFIG_BLK_DEV_AMD74XX is not set
++# CONFIG_BLK_DEV_CMD64X is not set
++# CONFIG_BLK_DEV_TRIFLEX is not set
++# CONFIG_BLK_DEV_CY82C693 is not set
++# CONFIG_BLK_DEV_CS5520 is not set
++# CONFIG_BLK_DEV_CS5530 is not set
++# CONFIG_BLK_DEV_HPT34X is not set
++# CONFIG_BLK_DEV_HPT366 is not set
++# CONFIG_BLK_DEV_JMICRON is not set
++# CONFIG_BLK_DEV_SC1200 is not set
++# CONFIG_BLK_DEV_PIIX is not set
++# CONFIG_BLK_DEV_IT8213 is not set
++# CONFIG_BLK_DEV_IT821X is not set
++# CONFIG_BLK_DEV_NS87415 is not set
++# CONFIG_BLK_DEV_PDC202XX_OLD is not set
++# CONFIG_BLK_DEV_PDC202XX_NEW is not set
++# CONFIG_BLK_DEV_SVWKS is not set
++# CONFIG_BLK_DEV_SIIMAGE is not set
++# CONFIG_BLK_DEV_SL82C105 is not set
++# CONFIG_BLK_DEV_SLC90E66 is not set
++# CONFIG_BLK_DEV_TRM290 is not set
++CONFIG_BLK_DEV_VIA82CXXX=y
++# CONFIG_BLK_DEV_TC86C001 is not set
++CONFIG_BLK_DEV_IDEDMA=y
++CONFIG_IDE_ARCH_OBSOLETE_INIT=y
++# CONFIG_BLK_DEV_HD is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_NET_PCI is not set
++# CONFIG_B44 is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++CONFIG_E1000=y
++CONFIG_E1000_NAPI=y
++# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
++# CONFIG_E1000E is not set
++# CONFIG_E1000E_ENABLED is not set
++# CONFIG_IP1000 is not set
++# CONFIG_IGB is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++# CONFIG_R8169 is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_VIA_VELOCITY is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++CONFIG_GIANFAR=y
++CONFIG_GFAR_NAPI=y
++# CONFIG_QLA3XXX is not set
++# CONFIG_ATL1 is not set
++CONFIG_NETDEV_10000=y
++# CONFIG_CHELSIO_T1 is not set
++# CONFIG_CHELSIO_T3 is not set
++# CONFIG_IXGBE is not set
++# CONFIG_IXGB is not set
++# CONFIG_S2IO is not set
++# CONFIG_MYRI10GE is not set
++# CONFIG_NETXEN_NIC is not set
++# CONFIG_NIU is not set
++# CONFIG_MLX4_CORE is not set
++# CONFIG_TEHUTI is not set
++# CONFIG_BNX2X is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_PCI=y
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++# CONFIG_SERIAL_8250_EXTENDED is not set
++CONFIG_SERIAL_8250_SHARE_IRQ=y
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_JSM is not set
++# CONFIG_SERIAL_OF_PLATFORM is not set
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_NVRAM is not set
++CONFIG_GEN_RTC=y
++# CONFIG_GEN_RTC_X is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++# CONFIG_I2C is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_SENSORS_I5K_AMB is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_F71882FG is not set
++# CONFIG_SENSORS_IT87 is not set
++# CONFIG_SENSORS_PC87360 is not set
++# CONFIG_SENSORS_PC87427 is not set
++# CONFIG_SENSORS_SIS5595 is not set
++# CONFIG_SENSORS_SMSC47M1 is not set
++# CONFIG_SENSORS_SMSC47B397 is not set
++# CONFIG_SENSORS_VIA686A is not set
++# CONFIG_SENSORS_VT1211 is not set
++# CONFIG_SENSORS_VT8231 is not set
++# CONFIG_SENSORS_W83627HF is not set
++# CONFIG_SENSORS_W83627EHF is not set
++# CONFIG_HWMON_DEBUG_CHIP is not set
++# CONFIG_THERMAL is not set
++# CONFIG_WATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++
++#
++# Graphics support
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=y
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++# CONFIG_USB is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++# CONFIG_RTC_CLASS is not set
++# CONFIG_DMADEVICES is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++# CONFIG_NFS_V3 is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++# CONFIG_MAC_PARTITION is not set
++# CONFIG_MSDOS_PARTITION is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++CONFIG_DEBUG_MUTEXES=y
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_DEBUG_STACKOVERFLOW is not set
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++# CONFIG_DEBUGGER is not set
++# CONFIG_BDI_SWITCH is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_SEQIV is not set
++# CONFIG_CRYPTO_MANAGER is not set
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++# CONFIG_CRYPTO_MD5 is not set
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++# CONFIG_CRYPTO_CBC is not set
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++# CONFIG_CRYPTO_DES is not set
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_CRYPTO_DEV_HIFN_795X is not set
++# CONFIG_PPC_CLOCK is not set
+--- /dev/null
++++ b/arch/powerpc/configs/85xx/sbc8548_defconfig
+@@ -0,0 +1,812 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc6
++# Mon Mar 24 08:48:39 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++# CONFIG_6xx is not set
++CONFIG_PPC_85xx=y
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++# CONFIG_44x is not set
++# CONFIG_E200 is not set
++CONFIG_E500=y
++CONFIG_BOOKE=y
++CONFIG_FSL_BOOKE=y
++CONFIG_FSL_EMB_PERFMON=y
++# CONFIG_PHYS_64BIT is not set
++CONFIG_SPE=y
++# CONFIG_PPC_MM_SLICES is not set
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFAULT_UIMAGE=y
++# CONFIG_PPC_DCR_NATIVE is not set
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++CONFIG_FAIR_GROUP_SCHED=y
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++# CONFIG_MODULES is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++
++#
++# Platform support
++#
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++CONFIG_MPC85xx=y
++# CONFIG_MPC8540_ADS is not set
++# CONFIG_MPC8560_ADS is not set
++# CONFIG_MPC85xx_CDS is not set
++# CONFIG_MPC85xx_MDS is not set
++# CONFIG_MPC85xx_DS is not set
++# CONFIG_STX_GP3 is not set
++# CONFIG_TQM8540 is not set
++# CONFIG_TQM8541 is not set
++# CONFIG_TQM8555 is not set
++# CONFIG_TQM8560 is not set
++CONFIG_SBC8548=y
++# CONFIG_SBC8560 is not set
++# CONFIG_IPIC is not set
++CONFIG_MPIC=y
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++# CONFIG_CPM2 is not set
++# CONFIG_FSL_ULI1575 is not set
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++# CONFIG_TICK_ONESHOT is not set
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_BINFMT_ELF=y
++CONFIG_BINFMT_MISC=y
++CONFIG_MATH_EMULATION=y
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_PROC_DEVICETREE=y
++# CONFIG_CMDLINE_BOOL is not set
++# CONFIG_PM is not set
++# CONFIG_SECCOMP is not set
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_FSL_SOC=y
++CONFIG_FSL_PCI=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++# CONFIG_PCIEPORTBUS is not set
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++CONFIG_PCI_LEGACY=y
++# CONFIG_PCCARD is not set
++# CONFIG_HOTPLUG_PCI is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_BOOT_LOAD=0x00800000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++CONFIG_XFRM_USER=y
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_FW_LOADER is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++# CONFIG_MTD is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=4096
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_SGI_IOC4 is not set
++# CONFIG_TIFM_CORE is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++CONFIG_BROADCOM_PHY=y
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_NET_PCI is not set
++# CONFIG_B44 is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++# CONFIG_E1000 is not set
++# CONFIG_E1000E is not set
++# CONFIG_E1000E_ENABLED is not set
++# CONFIG_IP1000 is not set
++# CONFIG_IGB is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++# CONFIG_R8169 is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_VIA_VELOCITY is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++CONFIG_GIANFAR=y
++CONFIG_GFAR_NAPI=y
++# CONFIG_QLA3XXX is not set
++# CONFIG_ATL1 is not set
++CONFIG_NETDEV_10000=y
++# CONFIG_CHELSIO_T1 is not set
++# CONFIG_CHELSIO_T3 is not set
++# CONFIG_IXGBE is not set
++# CONFIG_IXGB is not set
++# CONFIG_S2IO is not set
++# CONFIG_MYRI10GE is not set
++# CONFIG_NETXEN_NIC is not set
++# CONFIG_NIU is not set
++# CONFIG_MLX4_CORE is not set
++# CONFIG_TEHUTI is not set
++# CONFIG_BNX2X is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_PCI=y
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++# CONFIG_SERIAL_8250_EXTENDED is not set
++CONFIG_SERIAL_8250_SHARE_IRQ=y
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_JSM is not set
++# CONFIG_SERIAL_OF_PLATFORM is not set
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_NVRAM is not set
++CONFIG_GEN_RTC=y
++# CONFIG_GEN_RTC_X is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++# CONFIG_I2C is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_SENSORS_I5K_AMB is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_F71882FG is not set
++# CONFIG_SENSORS_IT87 is not set
++# CONFIG_SENSORS_PC87360 is not set
++# CONFIG_SENSORS_PC87427 is not set
++# CONFIG_SENSORS_SIS5595 is not set
++# CONFIG_SENSORS_SMSC47M1 is not set
++# CONFIG_SENSORS_SMSC47B397 is not set
++# CONFIG_SENSORS_VIA686A is not set
++# CONFIG_SENSORS_VT1211 is not set
++# CONFIG_SENSORS_VT8231 is not set
++# CONFIG_SENSORS_W83627HF is not set
++# CONFIG_SENSORS_W83627EHF is not set
++# CONFIG_HWMON_DEBUG_CHIP is not set
++# CONFIG_THERMAL is not set
++# CONFIG_WATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++
++#
++# Graphics support
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=y
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++# CONFIG_HID_SUPPORT is not set
++# CONFIG_USB_SUPPORT is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++# CONFIG_RTC_CLASS is not set
++# CONFIG_DMADEVICES is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++# CONFIG_EXT2_FS is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4DEV_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++# CONFIG_NFS_V3 is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_KERNEL is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_SEQIV is not set
++# CONFIG_CRYPTO_MANAGER is not set
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++# CONFIG_CRYPTO_MD5 is not set
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++# CONFIG_CRYPTO_CBC is not set
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++# CONFIG_CRYPTO_DES is not set
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_CRYPTO_DEV_HIFN_795X is not set
++# CONFIG_PPC_CLOCK is not set
+--- /dev/null
++++ b/arch/powerpc/configs/85xx/sbc8560_defconfig
+@@ -0,0 +1,830 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc6
++# Mon Mar 24 08:48:39 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++# CONFIG_6xx is not set
++CONFIG_PPC_85xx=y
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++# CONFIG_44x is not set
++# CONFIG_E200 is not set
++CONFIG_E500=y
++CONFIG_BOOKE=y
++CONFIG_FSL_BOOKE=y
++CONFIG_FSL_EMB_PERFMON=y
++# CONFIG_PHYS_64BIT is not set
++CONFIG_SPE=y
++# CONFIG_PPC_MM_SLICES is not set
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFAULT_UIMAGE=y
++# CONFIG_PPC_DCR_NATIVE is not set
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++CONFIG_FAIR_GROUP_SCHED=y
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++# CONFIG_MODULES is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++
++#
++# Platform support
++#
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++CONFIG_MPC85xx=y
++# CONFIG_MPC8540_ADS is not set
++# CONFIG_MPC8560_ADS is not set
++# CONFIG_MPC85xx_CDS is not set
++# CONFIG_MPC85xx_MDS is not set
++# CONFIG_MPC85xx_DS is not set
++# CONFIG_STX_GP3 is not set
++# CONFIG_TQM8540 is not set
++# CONFIG_TQM8541 is not set
++# CONFIG_TQM8555 is not set
++# CONFIG_TQM8560 is not set
++# CONFIG_SBC8548 is not set
++CONFIG_SBC8560=y
++# CONFIG_IPIC is not set
++CONFIG_MPIC=y
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++# CONFIG_CPM2 is not set
++# CONFIG_FSL_ULI1575 is not set
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++# CONFIG_TICK_ONESHOT is not set
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_BINFMT_ELF=y
++CONFIG_BINFMT_MISC=y
++# CONFIG_MATH_EMULATION is not set
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_PROC_DEVICETREE=y
++# CONFIG_CMDLINE_BOOL is not set
++# CONFIG_PM is not set
++# CONFIG_SECCOMP is not set
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_FSL_SOC=y
++# CONFIG_PCI is not set
++# CONFIG_PCI_DOMAINS is not set
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_BOOT_LOAD=0x00800000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++CONFIG_XFRM_USER=y
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_FW_LOADER is not set
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++# CONFIG_MTD is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=32768
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++CONFIG_BROADCOM_PHY=y
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_B44 is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_E1000E_ENABLED is not set
++CONFIG_GIANFAR=y
++CONFIG_GFAR_NAPI=y
++CONFIG_NETDEV_10000=y
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_NR_UARTS=2
++CONFIG_SERIAL_8250_RUNTIME_UARTS=2
++# CONFIG_SERIAL_8250_EXTENDED is not set
++CONFIG_SERIAL_8250_SHARE_IRQ=y
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_OF_PLATFORM is not set
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_NVRAM is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++# CONFIG_I2C is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_F71882FG is not set
++# CONFIG_SENSORS_IT87 is not set
++# CONFIG_SENSORS_PC87360 is not set
++# CONFIG_SENSORS_PC87427 is not set
++# CONFIG_SENSORS_SMSC47M1 is not set
++# CONFIG_SENSORS_SMSC47B397 is not set
++# CONFIG_SENSORS_VT1211 is not set
++# CONFIG_SENSORS_W83627HF is not set
++# CONFIG_SENSORS_W83627EHF is not set
++# CONFIG_HWMON_DEBUG_CHIP is not set
++# CONFIG_THERMAL is not set
++# CONFIG_WATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=y
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
++CONFIG_USB_SUPPORT=y
++# CONFIG_USB_ARCH_HAS_HCD is not set
++# CONFIG_USB_ARCH_HAS_OHCI is not set
++# CONFIG_USB_ARCH_HAS_EHCI is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_EDAC is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# SPI RTC drivers
++#
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++CONFIG_RTC_DRV_M48T59=y
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++# CONFIG_DMADEVICES is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++# CONFIG_EXT2_FS is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4DEV_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++# CONFIG_NFS_V3 is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++# CONFIG_MAC_PARTITION is not set
++# CONFIG_MSDOS_PARTITION is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_DEBUG_SLAB is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++CONFIG_DEBUG_MUTEXES=y
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_DEBUG_STACKOVERFLOW is not set
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++# CONFIG_DEBUGGER is not set
++# CONFIG_BDI_SWITCH is not set
++CONFIG_PPC_EARLY_DEBUG=y
++# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
++# CONFIG_PPC_EARLY_DEBUG_G5 is not set
++# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
++# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
++# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
++# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
++# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
++# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
++# CONFIG_PPC_EARLY_DEBUG_44x is not set
++# CONFIG_PPC_EARLY_DEBUG_40x is not set
++# CONFIG_PPC_EARLY_DEBUG_CPM is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_SEQIV is not set
++# CONFIG_CRYPTO_MANAGER is not set
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++# CONFIG_CRYPTO_MD5 is not set
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++# CONFIG_CRYPTO_CBC is not set
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++# CONFIG_CRYPTO_DES is not set
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_PPC_CLOCK is not set
+--- /dev/null
++++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
+@@ -0,0 +1,1253 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc6
++# Mon Mar 24 08:48:42 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++# CONFIG_6xx is not set
++CONFIG_PPC_85xx=y
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++# CONFIG_44x is not set
++# CONFIG_E200 is not set
++CONFIG_E500=y
++CONFIG_BOOKE=y
++CONFIG_FSL_BOOKE=y
++CONFIG_FSL_EMB_PERFMON=y
++# CONFIG_PHYS_64BIT is not set
++CONFIG_SPE=y
++# CONFIG_PPC_MM_SLICES is not set
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFAULT_UIMAGE=y
++# CONFIG_PPC_DCR_NATIVE is not set
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++CONFIG_FAIR_GROUP_SCHED=y
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++# CONFIG_MODULE_UNLOAD is not set
++CONFIG_MODVERSIONS=y
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
++CONFIG_CLASSIC_RCU=y
++
++#
++# Platform support
++#
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++CONFIG_MPC85xx=y
++# CONFIG_MPC8540_ADS is not set
++# CONFIG_MPC8560_ADS is not set
++# CONFIG_MPC85xx_CDS is not set
++# CONFIG_MPC85xx_MDS is not set
++# CONFIG_MPC85xx_DS is not set
++CONFIG_STX_GP3=y
++# CONFIG_TQM8540 is not set
++# CONFIG_TQM8541 is not set
++# CONFIG_TQM8555 is not set
++# CONFIG_TQM8560 is not set
++# CONFIG_SBC8548 is not set
++# CONFIG_SBC8560 is not set
++# CONFIG_IPIC is not set
++CONFIG_MPIC=y
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++CONFIG_CPM2=y
++CONFIG_PPC_CPM_NEW_BINDING=y
++# CONFIG_FSL_ULI1575 is not set
++CONFIG_CPM=y
++
++#
++# Kernel options
++#
++CONFIG_HIGHMEM=y
++# CONFIG_TICK_ONESHOT is not set
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_BINFMT_ELF=y
++CONFIG_BINFMT_MISC=m
++CONFIG_MATH_EMULATION=y
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_PROC_DEVICETREE=y
++# CONFIG_CMDLINE_BOOL is not set
++# CONFIG_PM is not set
++CONFIG_SECCOMP=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_FSL_SOC=y
++CONFIG_FSL_PCI=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++# CONFIG_PCIEPORTBUS is not set
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++CONFIG_PCI_LEGACY=y
++# CONFIG_PCI_DEBUG is not set
++# CONFIG_PCCARD is not set
++# CONFIG_HOTPLUG_PCI is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_BOOT_LOAD=0x00800000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++# CONFIG_IP_PNP_DHCP is not set
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IP_VS is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++CONFIG_NETFILTER=y
++# CONFIG_NETFILTER_DEBUG is not set
++CONFIG_NETFILTER_ADVANCED=y
++
++#
++# Core Netfilter Configuration
++#
++# CONFIG_NETFILTER_NETLINK_QUEUE is not set
++# CONFIG_NETFILTER_NETLINK_LOG is not set
++# CONFIG_NF_CONNTRACK is not set
++CONFIG_NETFILTER_XTABLES=m
++# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
++# CONFIG_NETFILTER_XT_TARGET_MARK is not set
++# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
++# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
++# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
++# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
++# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
++# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
++# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
++# CONFIG_NETFILTER_XT_MATCH_ESP is not set
++# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
++# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
++# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
++# CONFIG_NETFILTER_XT_MATCH_MAC is not set
++# CONFIG_NETFILTER_XT_MATCH_MARK is not set
++# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
++# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
++# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
++# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
++# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
++# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
++# CONFIG_NETFILTER_XT_MATCH_REALM is not set
++# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
++# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
++# CONFIG_NETFILTER_XT_MATCH_STRING is not set
++# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
++# CONFIG_NETFILTER_XT_MATCH_TIME is not set
++# CONFIG_NETFILTER_XT_MATCH_U32 is not set
++# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
++
++#
++# IP: Netfilter Configuration
++#
++# CONFIG_IP_NF_QUEUE is not set
++CONFIG_IP_NF_IPTABLES=m
++# CONFIG_IP_NF_MATCH_RECENT is not set
++# CONFIG_IP_NF_MATCH_ECN is not set
++# CONFIG_IP_NF_MATCH_AH is not set
++# CONFIG_IP_NF_MATCH_TTL is not set
++# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
++CONFIG_IP_NF_FILTER=m
++# CONFIG_IP_NF_TARGET_REJECT is not set
++# CONFIG_IP_NF_TARGET_LOG is not set
++# CONFIG_IP_NF_TARGET_ULOG is not set
++# CONFIG_IP_NF_MANGLE is not set
++# CONFIG_IP_NF_RAW is not set
++# CONFIG_IP_NF_ARPTABLES is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++CONFIG_NET_PKTGEN=y
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_FW_LOADER is not set
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++# CONFIG_MTD is not set
++CONFIG_OF_DEVICE=y
++CONFIG_PARPORT=m
++CONFIG_PARPORT_PC=m
++# CONFIG_PARPORT_PC_FIFO is not set
++# CONFIG_PARPORT_PC_SUPERIO is not set
++# CONFIG_PARPORT_GSC is not set
++# CONFIG_PARPORT_AX88796 is not set
++# CONFIG_PARPORT_1284 is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_PARIDE is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=m
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++CONFIG_BLK_DEV_NBD=m
++# CONFIG_BLK_DEV_SX8 is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=32768
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_SGI_IOC4 is not set
++# CONFIG_TIFM_CORE is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++CONFIG_IDE=y
++CONFIG_IDE_MAX_HWIFS=4
++CONFIG_BLK_DEV_IDE=y
++
++#
++# Please see Documentation/ide/ide.txt for help/info on IDE drives
++#
++# CONFIG_BLK_DEV_IDE_SATA is not set
++CONFIG_BLK_DEV_IDEDISK=y
++# CONFIG_IDEDISK_MULTI_MODE is not set
++CONFIG_BLK_DEV_IDECD=m
++CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
++# CONFIG_BLK_DEV_IDETAPE is not set
++# CONFIG_BLK_DEV_IDEFLOPPY is not set
++# CONFIG_BLK_DEV_IDESCSI is not set
++# CONFIG_IDE_TASK_IOCTL is not set
++CONFIG_IDE_PROC_FS=y
++
++#
++# IDE chipset support/bugfixes
++#
++CONFIG_IDE_GENERIC=y
++# CONFIG_BLK_DEV_PLATFORM is not set
++
++#
++# PCI IDE chipsets support
++#
++# CONFIG_BLK_DEV_GENERIC is not set
++# CONFIG_BLK_DEV_OPTI621 is not set
++# CONFIG_BLK_DEV_AEC62XX is not set
++# CONFIG_BLK_DEV_ALI15X3 is not set
++# CONFIG_BLK_DEV_AMD74XX is not set
++# CONFIG_BLK_DEV_CMD64X is not set
++# CONFIG_BLK_DEV_TRIFLEX is not set
++# CONFIG_BLK_DEV_CY82C693 is not set
++# CONFIG_BLK_DEV_CS5520 is not set
++# CONFIG_BLK_DEV_CS5530 is not set
++# CONFIG_BLK_DEV_HPT34X is not set
++# CONFIG_BLK_DEV_HPT366 is not set
++# CONFIG_BLK_DEV_JMICRON is not set
++# CONFIG_BLK_DEV_SC1200 is not set
++# CONFIG_BLK_DEV_PIIX is not set
++# CONFIG_BLK_DEV_IT8213 is not set
++# CONFIG_BLK_DEV_IT821X is not set
++# CONFIG_BLK_DEV_NS87415 is not set
++# CONFIG_BLK_DEV_PDC202XX_OLD is not set
++# CONFIG_BLK_DEV_PDC202XX_NEW is not set
++# CONFIG_BLK_DEV_SVWKS is not set
++# CONFIG_BLK_DEV_SIIMAGE is not set
++# CONFIG_BLK_DEV_SL82C105 is not set
++# CONFIG_BLK_DEV_SLC90E66 is not set
++# CONFIG_BLK_DEV_TRM290 is not set
++# CONFIG_BLK_DEV_VIA82CXXX is not set
++# CONFIG_BLK_DEV_TC86C001 is not set
++# CONFIG_BLK_DEV_IDEDMA is not set
++CONFIG_IDE_ARCH_OBSOLETE_INIT=y
++# CONFIG_BLK_DEV_HD is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=m
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=m
++CONFIG_CHR_DEV_ST=m
++# CONFIG_CHR_DEV_OSST is not set
++CONFIG_BLK_DEV_SR=m
++# CONFIG_BLK_DEV_SR_VENDOR is not set
++CONFIG_CHR_DEV_SG=m
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++CONFIG_SCSI_MULTI_LUN=y
++CONFIG_SCSI_CONSTANTS=y
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
++# CONFIG_SCSI_3W_9XXX is not set
++# CONFIG_SCSI_ACARD is not set
++# CONFIG_SCSI_AACRAID is not set
++# CONFIG_SCSI_AIC7XXX is not set
++# CONFIG_SCSI_AIC7XXX_OLD is not set
++# CONFIG_SCSI_AIC79XX is not set
++# CONFIG_SCSI_AIC94XX is not set
++# CONFIG_SCSI_DPT_I2O is not set
++# CONFIG_SCSI_ADVANSYS is not set
++# CONFIG_SCSI_ARCMSR is not set
++# CONFIG_MEGARAID_NEWGEN is not set
++# CONFIG_MEGARAID_LEGACY is not set
++# CONFIG_MEGARAID_SAS is not set
++# CONFIG_SCSI_HPTIOP is not set
++# CONFIG_SCSI_BUSLOGIC is not set
++# CONFIG_SCSI_DMX3191D is not set
++# CONFIG_SCSI_EATA is not set
++# CONFIG_SCSI_FUTURE_DOMAIN is not set
++# CONFIG_SCSI_GDTH is not set
++# CONFIG_SCSI_IPS is not set
++# CONFIG_SCSI_INITIO is not set
++# CONFIG_SCSI_INIA100 is not set
++# CONFIG_SCSI_PPA is not set
++# CONFIG_SCSI_IMM is not set
++# CONFIG_SCSI_MVSAS is not set
++# CONFIG_SCSI_STEX is not set
++# CONFIG_SCSI_SYM53C8XX_2 is not set
++# CONFIG_SCSI_QLOGIC_1280 is not set
++# CONFIG_SCSI_QLA_FC is not set
++# CONFIG_SCSI_QLA_ISCSI is not set
++# CONFIG_SCSI_LPFC is not set
++# CONFIG_SCSI_DC395x is not set
++# CONFIG_SCSI_DC390T is not set
++# CONFIG_SCSI_NSP32 is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_SCSI_SRP is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++CONFIG_MARVELL_PHY=y
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++# CONFIG_MII is not set
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_NET_PCI is not set
++# CONFIG_B44 is not set
++# CONFIG_NET_POCKET is not set
++# CONFIG_FS_ENET is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++# CONFIG_E1000 is not set
++# CONFIG_E1000E is not set
++# CONFIG_E1000E_ENABLED is not set
++# CONFIG_IP1000 is not set
++# CONFIG_IGB is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++# CONFIG_R8169 is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_VIA_VELOCITY is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++CONFIG_GIANFAR=y
++CONFIG_GFAR_NAPI=y
++# CONFIG_QLA3XXX is not set
++# CONFIG_ATL1 is not set
++CONFIG_NETDEV_10000=y
++# CONFIG_CHELSIO_T1 is not set
++# CONFIG_CHELSIO_T3 is not set
++# CONFIG_IXGBE is not set
++# CONFIG_IXGB is not set
++# CONFIG_S2IO is not set
++# CONFIG_MYRI10GE is not set
++# CONFIG_NETXEN_NIC is not set
++# CONFIG_NIU is not set
++# CONFIG_MLX4_CORE is not set
++# CONFIG_TEHUTI is not set
++# CONFIG_BNX2X is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PLIP is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NET_FC is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
++CONFIG_INPUT_MOUSEDEV_PSAUX=y
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024
++CONFIG_INPUT_JOYDEV=m
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++CONFIG_KEYBOARD_ATKBD=y
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++CONFIG_INPUT_MOUSE=y
++CONFIG_MOUSE_PS2=y
++CONFIG_MOUSE_PS2_ALPS=y
++CONFIG_MOUSE_PS2_LOGIPS2PP=y
++CONFIG_MOUSE_PS2_SYNAPTICS=y
++CONFIG_MOUSE_PS2_LIFEBOOK=y
++CONFIG_MOUSE_PS2_TRACKPOINT=y
++# CONFIG_MOUSE_PS2_TOUCHKIT is not set
++# CONFIG_MOUSE_SERIAL is not set
++# CONFIG_MOUSE_APPLETOUCH is not set
++# CONFIG_MOUSE_VSXXXAA is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++CONFIG_SERIO=y
++CONFIG_SERIO_I8042=y
++CONFIG_SERIO_SERPORT=y
++# CONFIG_SERIO_PARKBD is not set
++# CONFIG_SERIO_PCIPS2 is not set
++CONFIG_SERIO_LIBPS2=y
++# CONFIG_SERIO_RAW is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_SERIAL_CPM=y
++CONFIG_SERIAL_CPM_CONSOLE=y
++# CONFIG_SERIAL_CPM_SCC1 is not set
++CONFIG_SERIAL_CPM_SCC2=y
++# CONFIG_SERIAL_CPM_SCC3 is not set
++# CONFIG_SERIAL_CPM_SCC4 is not set
++# CONFIG_SERIAL_CPM_SMC1 is not set
++# CONFIG_SERIAL_CPM_SMC2 is not set
++# CONFIG_SERIAL_JSM is not set
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++CONFIG_PRINTER=m
++# CONFIG_LP_CONSOLE is not set
++# CONFIG_PPDEV is not set
++# CONFIG_IPMI_HANDLER is not set
++CONFIG_HW_RANDOM=m
++# CONFIG_NVRAM is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++CONFIG_I2C=m
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=m
++
++#
++# I2C Algorithms
++#
++CONFIG_I2C_ALGOBIT=m
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++# CONFIG_I2C_ALI1535 is not set
++# CONFIG_I2C_ALI1563 is not set
++# CONFIG_I2C_ALI15X3 is not set
++# CONFIG_I2C_AMD756 is not set
++# CONFIG_I2C_AMD8111 is not set
++# CONFIG_I2C_I801 is not set
++# CONFIG_I2C_I810 is not set
++# CONFIG_I2C_PIIX4 is not set
++# CONFIG_I2C_MPC is not set
++# CONFIG_I2C_NFORCE2 is not set
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_PROSAVAGE is not set
++# CONFIG_I2C_SAVAGE4 is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_SIS5595 is not set
++# CONFIG_I2C_SIS630 is not set
++# CONFIG_I2C_SIS96X is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_VIA is not set
++# CONFIG_I2C_VIAPRO is not set
++# CONFIG_I2C_VOODOO3 is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_SENSORS_AD7418 is not set
++# CONFIG_SENSORS_ADM1021 is not set
++# CONFIG_SENSORS_ADM1025 is not set
++# CONFIG_SENSORS_ADM1026 is not set
++# CONFIG_SENSORS_ADM1029 is not set
++# CONFIG_SENSORS_ADM1031 is not set
++# CONFIG_SENSORS_ADM9240 is not set
++# CONFIG_SENSORS_ADT7470 is not set
++# CONFIG_SENSORS_ADT7473 is not set
++# CONFIG_SENSORS_ATXP1 is not set
++# CONFIG_SENSORS_DS1621 is not set
++# CONFIG_SENSORS_I5K_AMB is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_F71882FG is not set
++# CONFIG_SENSORS_F75375S is not set
++# CONFIG_SENSORS_GL518SM is not set
++# CONFIG_SENSORS_GL520SM is not set
++# CONFIG_SENSORS_IT87 is not set
++# CONFIG_SENSORS_LM63 is not set
++# CONFIG_SENSORS_LM75 is not set
++# CONFIG_SENSORS_LM77 is not set
++# CONFIG_SENSORS_LM78 is not set
++# CONFIG_SENSORS_LM80 is not set
++# CONFIG_SENSORS_LM83 is not set
++# CONFIG_SENSORS_LM85 is not set
++# CONFIG_SENSORS_LM87 is not set
++# CONFIG_SENSORS_LM90 is not set
++# CONFIG_SENSORS_LM92 is not set
++# CONFIG_SENSORS_LM93 is not set
++# CONFIG_SENSORS_MAX1619 is not set
++# CONFIG_SENSORS_MAX6650 is not set
++# CONFIG_SENSORS_PC87360 is not set
++# CONFIG_SENSORS_PC87427 is not set
++# CONFIG_SENSORS_SIS5595 is not set
++# CONFIG_SENSORS_DME1737 is not set
++# CONFIG_SENSORS_SMSC47M1 is not set
++# CONFIG_SENSORS_SMSC47M192 is not set
++# CONFIG_SENSORS_SMSC47B397 is not set
++# CONFIG_SENSORS_ADS7828 is not set
++# CONFIG_SENSORS_THMC50 is not set
++# CONFIG_SENSORS_VIA686A is not set
++# CONFIG_SENSORS_VT1211 is not set
++# CONFIG_SENSORS_VT8231 is not set
++# CONFIG_SENSORS_W83781D is not set
++# CONFIG_SENSORS_W83791D is not set
++# CONFIG_SENSORS_W83792D is not set
++# CONFIG_SENSORS_W83793 is not set
++# CONFIG_SENSORS_W83L785TS is not set
++# CONFIG_SENSORS_W83L786NG is not set
++# CONFIG_SENSORS_W83627HF is not set
++# CONFIG_SENSORS_W83627EHF is not set
++# CONFIG_HWMON_DEBUG_CHIP is not set
++# CONFIG_THERMAL is not set
++# CONFIG_WATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++
++#
++# Graphics support
++#
++CONFIG_AGP=m
++CONFIG_DRM=m
++# CONFIG_DRM_TDFX is not set
++# CONFIG_DRM_R128 is not set
++# CONFIG_DRM_RADEON is not set
++# CONFIG_DRM_MGA is not set
++# CONFIG_DRM_SIS is not set
++# CONFIG_DRM_VIA is not set
++# CONFIG_DRM_SAVAGE is not set
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++CONFIG_SOUND=m
++
++#
++# Advanced Linux Sound Architecture
++#
++# CONFIG_SND is not set
++
++#
++# Open Sound System
++#
++# CONFIG_SOUND_PRIME is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++# CONFIG_USB is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++# CONFIG_RTC_CLASS is not set
++# CONFIG_DMADEVICES is not set
++# CONFIG_AUXDISPLAY is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++CONFIG_AUTOFS_FS=m
++CONFIG_AUTOFS4_FS=y
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++CONFIG_ISO9660_FS=m
++# CONFIG_JOLIET is not set
++# CONFIG_ZISOFS is not set
++CONFIG_UDF_FS=m
++CONFIG_UDF_NLS=y
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=m
++CONFIG_MSDOS_FS=m
++CONFIG_VFAT_FS=m
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++# CONFIG_PROC_KCORE is not set
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_CRAMFS=m
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++CONFIG_SMB_FS=m
++# CONFIG_SMB_NLS_DEFAULT is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++# CONFIG_NLS_CODEPAGE_437 is not set
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++# CONFIG_NLS_CODEPAGE_850 is not set
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++# CONFIG_NLS_ISO8859_1 is not set
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++# CONFIG_NLS_UTF8 is not set
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_CRC_CCITT=y
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=m
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++# CONFIG_DEBUG_HIGHMEM is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_DEBUG_STACKOVERFLOW is not set
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++# CONFIG_DEBUGGER is not set
++# CONFIG_KGDB_CONSOLE is not set
++CONFIG_BDI_SWITCH=y
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_SEQIV is not set
++# CONFIG_CRYPTO_MANAGER is not set
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++# CONFIG_CRYPTO_MD5 is not set
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++# CONFIG_CRYPTO_CBC is not set
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++# CONFIG_CRYPTO_DES is not set
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_CRYPTO_DEV_HIFN_795X is not set
++# CONFIG_PPC_CLOCK is not set
++CONFIG_PPC_LIB_RHEAP=y
+--- /dev/null
++++ b/arch/powerpc/configs/85xx/tqm8540_defconfig
+@@ -0,0 +1,1097 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc6
++# Mon Mar 24 08:48:43 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++# CONFIG_6xx is not set
++CONFIG_PPC_85xx=y
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++# CONFIG_44x is not set
++# CONFIG_E200 is not set
++CONFIG_E500=y
++CONFIG_BOOKE=y
++CONFIG_FSL_BOOKE=y
++CONFIG_FSL_EMB_PERFMON=y
++# CONFIG_PHYS_64BIT is not set
++CONFIG_SPE=y
++# CONFIG_PPC_MM_SLICES is not set
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFAULT_UIMAGE=y
++# CONFIG_PPC_DCR_NATIVE is not set
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++CONFIG_FAIR_GROUP_SCHED=y
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++# CONFIG_KALLSYMS is not set
++# CONFIG_HOTPLUG is not set
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++# CONFIG_EPOLL is not set
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++# CONFIG_MODULES is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++
++#
++# Platform support
++#
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++CONFIG_MPC85xx=y
++# CONFIG_MPC8540_ADS is not set
++# CONFIG_MPC8560_ADS is not set
++# CONFIG_MPC85xx_CDS is not set
++# CONFIG_MPC85xx_MDS is not set
++# CONFIG_MPC85xx_DS is not set
++# CONFIG_STX_GP3 is not set
++CONFIG_TQM8540=y
++# CONFIG_TQM8541 is not set
++# CONFIG_TQM8555 is not set
++# CONFIG_TQM8560 is not set
++# CONFIG_SBC8548 is not set
++# CONFIG_SBC8560 is not set
++CONFIG_TQM85xx=y
++# CONFIG_IPIC is not set
++CONFIG_MPIC=y
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++# CONFIG_CPM2 is not set
++CONFIG_PPC_CPM_NEW_BINDING=y
++# CONFIG_FSL_ULI1575 is not set
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++# CONFIG_TICK_ONESHOT is not set
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++CONFIG_MATH_EMULATION=y
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_PROC_DEVICETREE is not set
++# CONFIG_CMDLINE_BOOL is not set
++# CONFIG_PM is not set
++CONFIG_SECCOMP=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_FSL_SOC=y
++CONFIG_FSL_PCI=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++# CONFIG_PCIEPORTBUS is not set
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++CONFIG_PCI_LEGACY=y
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_BOOT_LOAD=0x00800000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++CONFIG_MTD_CONCAT=y
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_OF_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PHYSMAP is not set
++# CONFIG_MTD_PHYSMAP_OF is not set
++# CONFIG_MTD_INTEL_VR_NOR is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_PMC551 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=32768
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_SGI_IOC4 is not set
++# CONFIG_TIFM_CORE is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++CONFIG_IDE=y
++CONFIG_IDE_MAX_HWIFS=4
++CONFIG_BLK_DEV_IDE=y
++
++#
++# Please see Documentation/ide/ide.txt for help/info on IDE drives
++#
++# CONFIG_BLK_DEV_IDE_SATA is not set
++CONFIG_BLK_DEV_IDEDISK=y
++# CONFIG_IDEDISK_MULTI_MODE is not set
++# CONFIG_BLK_DEV_IDECD is not set
++# CONFIG_BLK_DEV_IDETAPE is not set
++# CONFIG_BLK_DEV_IDEFLOPPY is not set
++# CONFIG_IDE_TASK_IOCTL is not set
++CONFIG_IDE_PROC_FS=y
++
++#
++# IDE chipset support/bugfixes
++#
++CONFIG_IDE_GENERIC=y
++# CONFIG_BLK_DEV_PLATFORM is not set
++CONFIG_BLK_DEV_IDEDMA_SFF=y
++
++#
++# PCI IDE chipsets support
++#
++CONFIG_BLK_DEV_IDEPCI=y
++CONFIG_IDEPCI_PCIBUS_ORDER=y
++# CONFIG_BLK_DEV_OFFBOARD is not set
++CONFIG_BLK_DEV_GENERIC=y
++# CONFIG_BLK_DEV_OPTI621 is not set
++CONFIG_BLK_DEV_IDEDMA_PCI=y
++# CONFIG_BLK_DEV_AEC62XX is not set
++# CONFIG_BLK_DEV_ALI15X3 is not set
++# CONFIG_BLK_DEV_AMD74XX is not set
++# CONFIG_BLK_DEV_CMD64X is not set
++# CONFIG_BLK_DEV_TRIFLEX is not set
++# CONFIG_BLK_DEV_CY82C693 is not set
++# CONFIG_BLK_DEV_CS5520 is not set
++# CONFIG_BLK_DEV_CS5530 is not set
++# CONFIG_BLK_DEV_HPT34X is not set
++# CONFIG_BLK_DEV_HPT366 is not set
++# CONFIG_BLK_DEV_JMICRON is not set
++# CONFIG_BLK_DEV_SC1200 is not set
++# CONFIG_BLK_DEV_PIIX is not set
++# CONFIG_BLK_DEV_IT8213 is not set
++# CONFIG_BLK_DEV_IT821X is not set
++# CONFIG_BLK_DEV_NS87415 is not set
++# CONFIG_BLK_DEV_PDC202XX_OLD is not set
++# CONFIG_BLK_DEV_PDC202XX_NEW is not set
++# CONFIG_BLK_DEV_SVWKS is not set
++# CONFIG_BLK_DEV_SIIMAGE is not set
++# CONFIG_BLK_DEV_SL82C105 is not set
++# CONFIG_BLK_DEV_SLC90E66 is not set
++# CONFIG_BLK_DEV_TRM290 is not set
++CONFIG_BLK_DEV_VIA82CXXX=y
++# CONFIG_BLK_DEV_TC86C001 is not set
++CONFIG_BLK_DEV_IDEDMA=y
++CONFIG_IDE_ARCH_OBSOLETE_INIT=y
++# CONFIG_BLK_DEV_HD is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++CONFIG_NET_PCI=y
++# CONFIG_PCNET32 is not set
++# CONFIG_AMD8111_ETH is not set
++# CONFIG_ADAPTEC_STARFIRE is not set
++# CONFIG_B44 is not set
++# CONFIG_FORCEDETH is not set
++# CONFIG_EEPRO100 is not set
++CONFIG_E100=y
++# CONFIG_FEALNX is not set
++# CONFIG_NATSEMI is not set
++# CONFIG_NE2K_PCI is not set
++# CONFIG_8139CP is not set
++# CONFIG_8139TOO is not set
++# CONFIG_R6040 is not set
++# CONFIG_SIS900 is not set
++# CONFIG_EPIC100 is not set
++# CONFIG_SUNDANCE is not set
++# CONFIG_TLAN is not set
++# CONFIG_VIA_RHINE is not set
++# CONFIG_SC92031 is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++# CONFIG_E1000 is not set
++# CONFIG_E1000E is not set
++# CONFIG_E1000E_ENABLED is not set
++# CONFIG_IP1000 is not set
++# CONFIG_IGB is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++# CONFIG_R8169 is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_VIA_VELOCITY is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++CONFIG_GIANFAR=y
++CONFIG_GFAR_NAPI=y
++# CONFIG_QLA3XXX is not set
++# CONFIG_ATL1 is not set
++CONFIG_NETDEV_10000=y
++# CONFIG_CHELSIO_T1 is not set
++# CONFIG_CHELSIO_T3 is not set
++# CONFIG_IXGBE is not set
++# CONFIG_IXGB is not set
++# CONFIG_S2IO is not set
++# CONFIG_MYRI10GE is not set
++# CONFIG_NETXEN_NIC is not set
++# CONFIG_NIU is not set
++# CONFIG_MLX4_CORE is not set
++# CONFIG_TEHUTI is not set
++# CONFIG_BNX2X is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_PCI=y
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++# CONFIG_SERIAL_8250_EXTENDED is not set
++CONFIG_SERIAL_8250_SHARE_IRQ=y
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_JSM is not set
++# CONFIG_SERIAL_OF_PLATFORM is not set
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++CONFIG_HW_RANDOM=y
++# CONFIG_NVRAM is not set
++CONFIG_GEN_RTC=y
++# CONFIG_GEN_RTC_X is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=y
++
++#
++# I2C Algorithms
++#
++# CONFIG_I2C_ALGOBIT is not set
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++# CONFIG_I2C_ALI1535 is not set
++# CONFIG_I2C_ALI1563 is not set
++# CONFIG_I2C_ALI15X3 is not set
++# CONFIG_I2C_AMD756 is not set
++# CONFIG_I2C_AMD8111 is not set
++# CONFIG_I2C_I801 is not set
++# CONFIG_I2C_I810 is not set
++# CONFIG_I2C_PIIX4 is not set
++CONFIG_I2C_MPC=y
++# CONFIG_I2C_NFORCE2 is not set
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_PROSAVAGE is not set
++# CONFIG_I2C_SAVAGE4 is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_SIS5595 is not set
++# CONFIG_I2C_SIS630 is not set
++# CONFIG_I2C_SIS96X is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_VIA is not set
++# CONFIG_I2C_VIAPRO is not set
++# CONFIG_I2C_VOODOO3 is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_SENSORS_AD7418 is not set
++# CONFIG_SENSORS_ADM1021 is not set
++# CONFIG_SENSORS_ADM1025 is not set
++# CONFIG_SENSORS_ADM1026 is not set
++# CONFIG_SENSORS_ADM1029 is not set
++# CONFIG_SENSORS_ADM1031 is not set
++# CONFIG_SENSORS_ADM9240 is not set
++# CONFIG_SENSORS_ADT7470 is not set
++# CONFIG_SENSORS_ADT7473 is not set
++# CONFIG_SENSORS_ATXP1 is not set
++# CONFIG_SENSORS_DS1621 is not set
++# CONFIG_SENSORS_I5K_AMB is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_F71882FG is not set
++# CONFIG_SENSORS_F75375S is not set
++# CONFIG_SENSORS_GL518SM is not set
++# CONFIG_SENSORS_GL520SM is not set
++# CONFIG_SENSORS_IT87 is not set
++# CONFIG_SENSORS_LM63 is not set
++CONFIG_SENSORS_LM75=y
++# CONFIG_SENSORS_LM77 is not set
++# CONFIG_SENSORS_LM78 is not set
++# CONFIG_SENSORS_LM80 is not set
++# CONFIG_SENSORS_LM83 is not set
++# CONFIG_SENSORS_LM85 is not set
++# CONFIG_SENSORS_LM87 is not set
++# CONFIG_SENSORS_LM90 is not set
++# CONFIG_SENSORS_LM92 is not set
++# CONFIG_SENSORS_LM93 is not set
++# CONFIG_SENSORS_MAX1619 is not set
++# CONFIG_SENSORS_MAX6650 is not set
++# CONFIG_SENSORS_PC87360 is not set
++# CONFIG_SENSORS_PC87427 is not set
++# CONFIG_SENSORS_SIS5595 is not set
++# CONFIG_SENSORS_DME1737 is not set
++# CONFIG_SENSORS_SMSC47M1 is not set
++# CONFIG_SENSORS_SMSC47M192 is not set
++# CONFIG_SENSORS_SMSC47B397 is not set
++# CONFIG_SENSORS_ADS7828 is not set
++# CONFIG_SENSORS_THMC50 is not set
++# CONFIG_SENSORS_VIA686A is not set
++# CONFIG_SENSORS_VT1211 is not set
++# CONFIG_SENSORS_VT8231 is not set
++# CONFIG_SENSORS_W83781D is not set
++# CONFIG_SENSORS_W83791D is not set
++# CONFIG_SENSORS_W83792D is not set
++# CONFIG_SENSORS_W83793 is not set
++# CONFIG_SENSORS_W83L785TS is not set
++# CONFIG_SENSORS_W83L786NG is not set
++# CONFIG_SENSORS_W83627HF is not set
++# CONFIG_SENSORS_W83627EHF is not set
++CONFIG_HWMON_DEBUG_CHIP=y
++# CONFIG_THERMAL is not set
++# CONFIG_WATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++
++#
++# Graphics support
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++# CONFIG_USB is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++# CONFIG_RTC_CLASS is not set
++# CONFIG_DMADEVICES is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++CONFIG_CRAMFS=y
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++# CONFIG_NFS_V3 is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++# CONFIG_MAC_PARTITION is not set
++# CONFIG_MSDOS_PARTITION is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_KERNEL is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_SEQIV is not set
++# CONFIG_CRYPTO_MANAGER is not set
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++# CONFIG_CRYPTO_MD5 is not set
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++# CONFIG_CRYPTO_CBC is not set
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++# CONFIG_CRYPTO_DES is not set
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_CRYPTO_DEV_HIFN_795X is not set
++# CONFIG_PPC_CLOCK is not set
+--- /dev/null
++++ b/arch/powerpc/configs/85xx/tqm8541_defconfig
+@@ -0,0 +1,1109 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc6
++# Mon Mar 24 08:48:44 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++# CONFIG_6xx is not set
++CONFIG_PPC_85xx=y
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++# CONFIG_44x is not set
++# CONFIG_E200 is not set
++CONFIG_E500=y
++CONFIG_BOOKE=y
++CONFIG_FSL_BOOKE=y
++CONFIG_FSL_EMB_PERFMON=y
++# CONFIG_PHYS_64BIT is not set
++CONFIG_SPE=y
++# CONFIG_PPC_MM_SLICES is not set
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFAULT_UIMAGE=y
++# CONFIG_PPC_DCR_NATIVE is not set
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++CONFIG_FAIR_GROUP_SCHED=y
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++# CONFIG_KALLSYMS is not set
++# CONFIG_HOTPLUG is not set
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++# CONFIG_EPOLL is not set
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++# CONFIG_MODULES is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++
++#
++# Platform support
++#
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++CONFIG_MPC85xx=y
++# CONFIG_MPC8540_ADS is not set
++# CONFIG_MPC8560_ADS is not set
++# CONFIG_MPC85xx_CDS is not set
++# CONFIG_MPC85xx_MDS is not set
++# CONFIG_MPC85xx_DS is not set
++# CONFIG_STX_GP3 is not set
++# CONFIG_TQM8540 is not set
++CONFIG_TQM8541=y
++# CONFIG_TQM8555 is not set
++# CONFIG_TQM8560 is not set
++# CONFIG_SBC8548 is not set
++# CONFIG_SBC8560 is not set
++CONFIG_TQM85xx=y
++# CONFIG_IPIC is not set
++CONFIG_MPIC=y
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++CONFIG_CPM2=y
++CONFIG_PPC_CPM_NEW_BINDING=y
++# CONFIG_FSL_ULI1575 is not set
++CONFIG_CPM=y
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++# CONFIG_TICK_ONESHOT is not set
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++CONFIG_MATH_EMULATION=y
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_PROC_DEVICETREE is not set
++# CONFIG_CMDLINE_BOOL is not set
++# CONFIG_PM is not set
++CONFIG_SECCOMP=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_FSL_SOC=y
++CONFIG_FSL_PCI=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++# CONFIG_PCIEPORTBUS is not set
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++CONFIG_PCI_LEGACY=y
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_BOOT_LOAD=0x00800000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++CONFIG_MTD_CONCAT=y
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_OF_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PHYSMAP is not set
++# CONFIG_MTD_PHYSMAP_OF is not set
++# CONFIG_MTD_INTEL_VR_NOR is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_PMC551 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=32768
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_SGI_IOC4 is not set
++# CONFIG_TIFM_CORE is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++CONFIG_IDE=y
++CONFIG_IDE_MAX_HWIFS=4
++CONFIG_BLK_DEV_IDE=y
++
++#
++# Please see Documentation/ide/ide.txt for help/info on IDE drives
++#
++# CONFIG_BLK_DEV_IDE_SATA is not set
++CONFIG_BLK_DEV_IDEDISK=y
++# CONFIG_IDEDISK_MULTI_MODE is not set
++# CONFIG_BLK_DEV_IDECD is not set
++# CONFIG_BLK_DEV_IDETAPE is not set
++# CONFIG_BLK_DEV_IDEFLOPPY is not set
++# CONFIG_IDE_TASK_IOCTL is not set
++CONFIG_IDE_PROC_FS=y
++
++#
++# IDE chipset support/bugfixes
++#
++CONFIG_IDE_GENERIC=y
++# CONFIG_BLK_DEV_PLATFORM is not set
++CONFIG_BLK_DEV_IDEDMA_SFF=y
++
++#
++# PCI IDE chipsets support
++#
++CONFIG_BLK_DEV_IDEPCI=y
++CONFIG_IDEPCI_PCIBUS_ORDER=y
++# CONFIG_BLK_DEV_OFFBOARD is not set
++CONFIG_BLK_DEV_GENERIC=y
++# CONFIG_BLK_DEV_OPTI621 is not set
++CONFIG_BLK_DEV_IDEDMA_PCI=y
++# CONFIG_BLK_DEV_AEC62XX is not set
++# CONFIG_BLK_DEV_ALI15X3 is not set
++# CONFIG_BLK_DEV_AMD74XX is not set
++# CONFIG_BLK_DEV_CMD64X is not set
++# CONFIG_BLK_DEV_TRIFLEX is not set
++# CONFIG_BLK_DEV_CY82C693 is not set
++# CONFIG_BLK_DEV_CS5520 is not set
++# CONFIG_BLK_DEV_CS5530 is not set
++# CONFIG_BLK_DEV_HPT34X is not set
++# CONFIG_BLK_DEV_HPT366 is not set
++# CONFIG_BLK_DEV_JMICRON is not set
++# CONFIG_BLK_DEV_SC1200 is not set
++# CONFIG_BLK_DEV_PIIX is not set
++# CONFIG_BLK_DEV_IT8213 is not set
++# CONFIG_BLK_DEV_IT821X is not set
++# CONFIG_BLK_DEV_NS87415 is not set
++# CONFIG_BLK_DEV_PDC202XX_OLD is not set
++# CONFIG_BLK_DEV_PDC202XX_NEW is not set
++# CONFIG_BLK_DEV_SVWKS is not set
++# CONFIG_BLK_DEV_SIIMAGE is not set
++# CONFIG_BLK_DEV_SL82C105 is not set
++# CONFIG_BLK_DEV_SLC90E66 is not set
++# CONFIG_BLK_DEV_TRM290 is not set
++CONFIG_BLK_DEV_VIA82CXXX=y
++# CONFIG_BLK_DEV_TC86C001 is not set
++CONFIG_BLK_DEV_IDEDMA=y
++CONFIG_IDE_ARCH_OBSOLETE_INIT=y
++# CONFIG_BLK_DEV_HD is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++CONFIG_NET_PCI=y
++# CONFIG_PCNET32 is not set
++# CONFIG_AMD8111_ETH is not set
++# CONFIG_ADAPTEC_STARFIRE is not set
++# CONFIG_B44 is not set
++# CONFIG_FORCEDETH is not set
++# CONFIG_EEPRO100 is not set
++CONFIG_E100=y
++# CONFIG_FEALNX is not set
++# CONFIG_NATSEMI is not set
++# CONFIG_NE2K_PCI is not set
++# CONFIG_8139CP is not set
++# CONFIG_8139TOO is not set
++# CONFIG_R6040 is not set
++# CONFIG_SIS900 is not set
++# CONFIG_EPIC100 is not set
++# CONFIG_SUNDANCE is not set
++# CONFIG_TLAN is not set
++# CONFIG_VIA_RHINE is not set
++# CONFIG_SC92031 is not set
++# CONFIG_FS_ENET is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++# CONFIG_E1000 is not set
++# CONFIG_E1000E is not set
++# CONFIG_E1000E_ENABLED is not set
++# CONFIG_IP1000 is not set
++# CONFIG_IGB is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++# CONFIG_R8169 is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_VIA_VELOCITY is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++CONFIG_GIANFAR=y
++CONFIG_GFAR_NAPI=y
++# CONFIG_QLA3XXX is not set
++# CONFIG_ATL1 is not set
++CONFIG_NETDEV_10000=y
++# CONFIG_CHELSIO_T1 is not set
++# CONFIG_CHELSIO_T3 is not set
++# CONFIG_IXGBE is not set
++# CONFIG_IXGB is not set
++# CONFIG_S2IO is not set
++# CONFIG_MYRI10GE is not set
++# CONFIG_NETXEN_NIC is not set
++# CONFIG_NIU is not set
++# CONFIG_MLX4_CORE is not set
++# CONFIG_TEHUTI is not set
++# CONFIG_BNX2X is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_PCI=y
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++# CONFIG_SERIAL_8250_EXTENDED is not set
++CONFIG_SERIAL_8250_SHARE_IRQ=y
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_SERIAL_CPM=y
++CONFIG_SERIAL_CPM_CONSOLE=y
++CONFIG_SERIAL_CPM_SCC1=y
++# CONFIG_SERIAL_CPM_SCC2 is not set
++# CONFIG_SERIAL_CPM_SCC3 is not set
++# CONFIG_SERIAL_CPM_SCC4 is not set
++# CONFIG_SERIAL_CPM_SMC1 is not set
++# CONFIG_SERIAL_CPM_SMC2 is not set
++# CONFIG_SERIAL_JSM is not set
++# CONFIG_SERIAL_OF_PLATFORM is not set
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++CONFIG_HW_RANDOM=y
++# CONFIG_NVRAM is not set
++CONFIG_GEN_RTC=y
++# CONFIG_GEN_RTC_X is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=y
++
++#
++# I2C Algorithms
++#
++# CONFIG_I2C_ALGOBIT is not set
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++# CONFIG_I2C_ALI1535 is not set
++# CONFIG_I2C_ALI1563 is not set
++# CONFIG_I2C_ALI15X3 is not set
++# CONFIG_I2C_AMD756 is not set
++# CONFIG_I2C_AMD8111 is not set
++# CONFIG_I2C_I801 is not set
++# CONFIG_I2C_I810 is not set
++# CONFIG_I2C_PIIX4 is not set
++CONFIG_I2C_MPC=y
++# CONFIG_I2C_NFORCE2 is not set
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_PROSAVAGE is not set
++# CONFIG_I2C_SAVAGE4 is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_SIS5595 is not set
++# CONFIG_I2C_SIS630 is not set
++# CONFIG_I2C_SIS96X is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_VIA is not set
++# CONFIG_I2C_VIAPRO is not set
++# CONFIG_I2C_VOODOO3 is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_SENSORS_AD7418 is not set
++# CONFIG_SENSORS_ADM1021 is not set
++# CONFIG_SENSORS_ADM1025 is not set
++# CONFIG_SENSORS_ADM1026 is not set
++# CONFIG_SENSORS_ADM1029 is not set
++# CONFIG_SENSORS_ADM1031 is not set
++# CONFIG_SENSORS_ADM9240 is not set
++# CONFIG_SENSORS_ADT7470 is not set
++# CONFIG_SENSORS_ADT7473 is not set
++# CONFIG_SENSORS_ATXP1 is not set
++# CONFIG_SENSORS_DS1621 is not set
++# CONFIG_SENSORS_I5K_AMB is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_F71882FG is not set
++# CONFIG_SENSORS_F75375S is not set
++# CONFIG_SENSORS_GL518SM is not set
++# CONFIG_SENSORS_GL520SM is not set
++# CONFIG_SENSORS_IT87 is not set
++# CONFIG_SENSORS_LM63 is not set
++CONFIG_SENSORS_LM75=y
++# CONFIG_SENSORS_LM77 is not set
++# CONFIG_SENSORS_LM78 is not set
++# CONFIG_SENSORS_LM80 is not set
++# CONFIG_SENSORS_LM83 is not set
++# CONFIG_SENSORS_LM85 is not set
++# CONFIG_SENSORS_LM87 is not set
++# CONFIG_SENSORS_LM90 is not set
++# CONFIG_SENSORS_LM92 is not set
++# CONFIG_SENSORS_LM93 is not set
++# CONFIG_SENSORS_MAX1619 is not set
++# CONFIG_SENSORS_MAX6650 is not set
++# CONFIG_SENSORS_PC87360 is not set
++# CONFIG_SENSORS_PC87427 is not set
++# CONFIG_SENSORS_SIS5595 is not set
++# CONFIG_SENSORS_DME1737 is not set
++# CONFIG_SENSORS_SMSC47M1 is not set
++# CONFIG_SENSORS_SMSC47M192 is not set
++# CONFIG_SENSORS_SMSC47B397 is not set
++# CONFIG_SENSORS_ADS7828 is not set
++# CONFIG_SENSORS_THMC50 is not set
++# CONFIG_SENSORS_VIA686A is not set
++# CONFIG_SENSORS_VT1211 is not set
++# CONFIG_SENSORS_VT8231 is not set
++# CONFIG_SENSORS_W83781D is not set
++# CONFIG_SENSORS_W83791D is not set
++# CONFIG_SENSORS_W83792D is not set
++# CONFIG_SENSORS_W83793 is not set
++# CONFIG_SENSORS_W83L785TS is not set
++# CONFIG_SENSORS_W83L786NG is not set
++# CONFIG_SENSORS_W83627HF is not set
++# CONFIG_SENSORS_W83627EHF is not set
++CONFIG_HWMON_DEBUG_CHIP=y
++# CONFIG_THERMAL is not set
++# CONFIG_WATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++
++#
++# Graphics support
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++# CONFIG_USB is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++# CONFIG_RTC_CLASS is not set
++# CONFIG_DMADEVICES is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++CONFIG_CRAMFS=y
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++# CONFIG_NFS_V3 is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++# CONFIG_MAC_PARTITION is not set
++# CONFIG_MSDOS_PARTITION is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_KERNEL is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_KGDB_CONSOLE is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_SEQIV is not set
++# CONFIG_CRYPTO_MANAGER is not set
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++# CONFIG_CRYPTO_MD5 is not set
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++# CONFIG_CRYPTO_CBC is not set
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++# CONFIG_CRYPTO_DES is not set
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_CRYPTO_DEV_HIFN_795X is not set
++# CONFIG_PPC_CLOCK is not set
++CONFIG_PPC_LIB_RHEAP=y
+--- /dev/null
++++ b/arch/powerpc/configs/85xx/tqm8555_defconfig
+@@ -0,0 +1,1109 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc6
++# Mon Mar 24 08:48:44 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++# CONFIG_6xx is not set
++CONFIG_PPC_85xx=y
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++# CONFIG_44x is not set
++# CONFIG_E200 is not set
++CONFIG_E500=y
++CONFIG_BOOKE=y
++CONFIG_FSL_BOOKE=y
++CONFIG_FSL_EMB_PERFMON=y
++# CONFIG_PHYS_64BIT is not set
++CONFIG_SPE=y
++# CONFIG_PPC_MM_SLICES is not set
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFAULT_UIMAGE=y
++# CONFIG_PPC_DCR_NATIVE is not set
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++CONFIG_FAIR_GROUP_SCHED=y
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++# CONFIG_KALLSYMS is not set
++# CONFIG_HOTPLUG is not set
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++# CONFIG_EPOLL is not set
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++# CONFIG_MODULES is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++
++#
++# Platform support
++#
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++CONFIG_MPC85xx=y
++# CONFIG_MPC8540_ADS is not set
++# CONFIG_MPC8560_ADS is not set
++# CONFIG_MPC85xx_CDS is not set
++# CONFIG_MPC85xx_MDS is not set
++# CONFIG_MPC85xx_DS is not set
++# CONFIG_STX_GP3 is not set
++# CONFIG_TQM8540 is not set
++# CONFIG_TQM8541 is not set
++CONFIG_TQM8555=y
++# CONFIG_TQM8560 is not set
++# CONFIG_SBC8548 is not set
++# CONFIG_SBC8560 is not set
++CONFIG_TQM85xx=y
++# CONFIG_IPIC is not set
++CONFIG_MPIC=y
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++CONFIG_CPM2=y
++CONFIG_PPC_CPM_NEW_BINDING=y
++# CONFIG_FSL_ULI1575 is not set
++CONFIG_CPM=y
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++# CONFIG_TICK_ONESHOT is not set
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++CONFIG_MATH_EMULATION=y
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_PROC_DEVICETREE is not set
++# CONFIG_CMDLINE_BOOL is not set
++# CONFIG_PM is not set
++CONFIG_SECCOMP=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_FSL_SOC=y
++CONFIG_FSL_PCI=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++# CONFIG_PCIEPORTBUS is not set
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++CONFIG_PCI_LEGACY=y
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_BOOT_LOAD=0x00800000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++CONFIG_MTD_CONCAT=y
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_OF_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PHYSMAP is not set
++# CONFIG_MTD_PHYSMAP_OF is not set
++# CONFIG_MTD_INTEL_VR_NOR is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_PMC551 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=32768
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_SGI_IOC4 is not set
++# CONFIG_TIFM_CORE is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++CONFIG_IDE=y
++CONFIG_IDE_MAX_HWIFS=4
++CONFIG_BLK_DEV_IDE=y
++
++#
++# Please see Documentation/ide/ide.txt for help/info on IDE drives
++#
++# CONFIG_BLK_DEV_IDE_SATA is not set
++CONFIG_BLK_DEV_IDEDISK=y
++# CONFIG_IDEDISK_MULTI_MODE is not set
++# CONFIG_BLK_DEV_IDECD is not set
++# CONFIG_BLK_DEV_IDETAPE is not set
++# CONFIG_BLK_DEV_IDEFLOPPY is not set
++# CONFIG_IDE_TASK_IOCTL is not set
++CONFIG_IDE_PROC_FS=y
++
++#
++# IDE chipset support/bugfixes
++#
++CONFIG_IDE_GENERIC=y
++# CONFIG_BLK_DEV_PLATFORM is not set
++CONFIG_BLK_DEV_IDEDMA_SFF=y
++
++#
++# PCI IDE chipsets support
++#
++CONFIG_BLK_DEV_IDEPCI=y
++CONFIG_IDEPCI_PCIBUS_ORDER=y
++# CONFIG_BLK_DEV_OFFBOARD is not set
++CONFIG_BLK_DEV_GENERIC=y
++# CONFIG_BLK_DEV_OPTI621 is not set
++CONFIG_BLK_DEV_IDEDMA_PCI=y
++# CONFIG_BLK_DEV_AEC62XX is not set
++# CONFIG_BLK_DEV_ALI15X3 is not set
++# CONFIG_BLK_DEV_AMD74XX is not set
++# CONFIG_BLK_DEV_CMD64X is not set
++# CONFIG_BLK_DEV_TRIFLEX is not set
++# CONFIG_BLK_DEV_CY82C693 is not set
++# CONFIG_BLK_DEV_CS5520 is not set
++# CONFIG_BLK_DEV_CS5530 is not set
++# CONFIG_BLK_DEV_HPT34X is not set
++# CONFIG_BLK_DEV_HPT366 is not set
++# CONFIG_BLK_DEV_JMICRON is not set
++# CONFIG_BLK_DEV_SC1200 is not set
++# CONFIG_BLK_DEV_PIIX is not set
++# CONFIG_BLK_DEV_IT8213 is not set
++# CONFIG_BLK_DEV_IT821X is not set
++# CONFIG_BLK_DEV_NS87415 is not set
++# CONFIG_BLK_DEV_PDC202XX_OLD is not set
++# CONFIG_BLK_DEV_PDC202XX_NEW is not set
++# CONFIG_BLK_DEV_SVWKS is not set
++# CONFIG_BLK_DEV_SIIMAGE is not set
++# CONFIG_BLK_DEV_SL82C105 is not set
++# CONFIG_BLK_DEV_SLC90E66 is not set
++# CONFIG_BLK_DEV_TRM290 is not set
++CONFIG_BLK_DEV_VIA82CXXX=y
++# CONFIG_BLK_DEV_TC86C001 is not set
++CONFIG_BLK_DEV_IDEDMA=y
++CONFIG_IDE_ARCH_OBSOLETE_INIT=y
++# CONFIG_BLK_DEV_HD is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++CONFIG_NET_PCI=y
++# CONFIG_PCNET32 is not set
++# CONFIG_AMD8111_ETH is not set
++# CONFIG_ADAPTEC_STARFIRE is not set
++# CONFIG_B44 is not set
++# CONFIG_FORCEDETH is not set
++# CONFIG_EEPRO100 is not set
++CONFIG_E100=y
++# CONFIG_FEALNX is not set
++# CONFIG_NATSEMI is not set
++# CONFIG_NE2K_PCI is not set
++# CONFIG_8139CP is not set
++# CONFIG_8139TOO is not set
++# CONFIG_R6040 is not set
++# CONFIG_SIS900 is not set
++# CONFIG_EPIC100 is not set
++# CONFIG_SUNDANCE is not set
++# CONFIG_TLAN is not set
++# CONFIG_VIA_RHINE is not set
++# CONFIG_SC92031 is not set
++# CONFIG_FS_ENET is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++# CONFIG_E1000 is not set
++# CONFIG_E1000E is not set
++# CONFIG_E1000E_ENABLED is not set
++# CONFIG_IP1000 is not set
++# CONFIG_IGB is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++# CONFIG_R8169 is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_VIA_VELOCITY is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++CONFIG_GIANFAR=y
++CONFIG_GFAR_NAPI=y
++# CONFIG_QLA3XXX is not set
++# CONFIG_ATL1 is not set
++CONFIG_NETDEV_10000=y
++# CONFIG_CHELSIO_T1 is not set
++# CONFIG_CHELSIO_T3 is not set
++# CONFIG_IXGBE is not set
++# CONFIG_IXGB is not set
++# CONFIG_S2IO is not set
++# CONFIG_MYRI10GE is not set
++# CONFIG_NETXEN_NIC is not set
++# CONFIG_NIU is not set
++# CONFIG_MLX4_CORE is not set
++# CONFIG_TEHUTI is not set
++# CONFIG_BNX2X is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_PCI=y
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++# CONFIG_SERIAL_8250_EXTENDED is not set
++CONFIG_SERIAL_8250_SHARE_IRQ=y
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_SERIAL_CPM=y
++CONFIG_SERIAL_CPM_CONSOLE=y
++CONFIG_SERIAL_CPM_SCC1=y
++# CONFIG_SERIAL_CPM_SCC2 is not set
++# CONFIG_SERIAL_CPM_SCC3 is not set
++# CONFIG_SERIAL_CPM_SCC4 is not set
++# CONFIG_SERIAL_CPM_SMC1 is not set
++# CONFIG_SERIAL_CPM_SMC2 is not set
++# CONFIG_SERIAL_JSM is not set
++# CONFIG_SERIAL_OF_PLATFORM is not set
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++CONFIG_HW_RANDOM=y
++# CONFIG_NVRAM is not set
++CONFIG_GEN_RTC=y
++# CONFIG_GEN_RTC_X is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=y
++
++#
++# I2C Algorithms
++#
++# CONFIG_I2C_ALGOBIT is not set
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++# CONFIG_I2C_ALI1535 is not set
++# CONFIG_I2C_ALI1563 is not set
++# CONFIG_I2C_ALI15X3 is not set
++# CONFIG_I2C_AMD756 is not set
++# CONFIG_I2C_AMD8111 is not set
++# CONFIG_I2C_I801 is not set
++# CONFIG_I2C_I810 is not set
++# CONFIG_I2C_PIIX4 is not set
++CONFIG_I2C_MPC=y
++# CONFIG_I2C_NFORCE2 is not set
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_PROSAVAGE is not set
++# CONFIG_I2C_SAVAGE4 is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_SIS5595 is not set
++# CONFIG_I2C_SIS630 is not set
++# CONFIG_I2C_SIS96X is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_VIA is not set
++# CONFIG_I2C_VIAPRO is not set
++# CONFIG_I2C_VOODOO3 is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_SENSORS_AD7418 is not set
++# CONFIG_SENSORS_ADM1021 is not set
++# CONFIG_SENSORS_ADM1025 is not set
++# CONFIG_SENSORS_ADM1026 is not set
++# CONFIG_SENSORS_ADM1029 is not set
++# CONFIG_SENSORS_ADM1031 is not set
++# CONFIG_SENSORS_ADM9240 is not set
++# CONFIG_SENSORS_ADT7470 is not set
++# CONFIG_SENSORS_ADT7473 is not set
++# CONFIG_SENSORS_ATXP1 is not set
++# CONFIG_SENSORS_DS1621 is not set
++# CONFIG_SENSORS_I5K_AMB is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_F71882FG is not set
++# CONFIG_SENSORS_F75375S is not set
++# CONFIG_SENSORS_GL518SM is not set
++# CONFIG_SENSORS_GL520SM is not set
++# CONFIG_SENSORS_IT87 is not set
++# CONFIG_SENSORS_LM63 is not set
++CONFIG_SENSORS_LM75=y
++# CONFIG_SENSORS_LM77 is not set
++# CONFIG_SENSORS_LM78 is not set
++# CONFIG_SENSORS_LM80 is not set
++# CONFIG_SENSORS_LM83 is not set
++# CONFIG_SENSORS_LM85 is not set
++# CONFIG_SENSORS_LM87 is not set
++# CONFIG_SENSORS_LM90 is not set
++# CONFIG_SENSORS_LM92 is not set
++# CONFIG_SENSORS_LM93 is not set
++# CONFIG_SENSORS_MAX1619 is not set
++# CONFIG_SENSORS_MAX6650 is not set
++# CONFIG_SENSORS_PC87360 is not set
++# CONFIG_SENSORS_PC87427 is not set
++# CONFIG_SENSORS_SIS5595 is not set
++# CONFIG_SENSORS_DME1737 is not set
++# CONFIG_SENSORS_SMSC47M1 is not set
++# CONFIG_SENSORS_SMSC47M192 is not set
++# CONFIG_SENSORS_SMSC47B397 is not set
++# CONFIG_SENSORS_ADS7828 is not set
++# CONFIG_SENSORS_THMC50 is not set
++# CONFIG_SENSORS_VIA686A is not set
++# CONFIG_SENSORS_VT1211 is not set
++# CONFIG_SENSORS_VT8231 is not set
++# CONFIG_SENSORS_W83781D is not set
++# CONFIG_SENSORS_W83791D is not set
++# CONFIG_SENSORS_W83792D is not set
++# CONFIG_SENSORS_W83793 is not set
++# CONFIG_SENSORS_W83L785TS is not set
++# CONFIG_SENSORS_W83L786NG is not set
++# CONFIG_SENSORS_W83627HF is not set
++# CONFIG_SENSORS_W83627EHF is not set
++CONFIG_HWMON_DEBUG_CHIP=y
++# CONFIG_THERMAL is not set
++# CONFIG_WATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++
++#
++# Graphics support
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++# CONFIG_USB is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++# CONFIG_RTC_CLASS is not set
++# CONFIG_DMADEVICES is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++CONFIG_CRAMFS=y
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++# CONFIG_NFS_V3 is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++# CONFIG_MAC_PARTITION is not set
++# CONFIG_MSDOS_PARTITION is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_KERNEL is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_KGDB_CONSOLE is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_SEQIV is not set
++# CONFIG_CRYPTO_MANAGER is not set
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++# CONFIG_CRYPTO_MD5 is not set
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++# CONFIG_CRYPTO_CBC is not set
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++# CONFIG_CRYPTO_DES is not set
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_CRYPTO_DEV_HIFN_795X is not set
++# CONFIG_PPC_CLOCK is not set
++CONFIG_PPC_LIB_RHEAP=y
+--- /dev/null
++++ b/arch/powerpc/configs/85xx/tqm8560_defconfig
+@@ -0,0 +1,1109 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc6
++# Mon Mar 24 08:48:45 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++# CONFIG_6xx is not set
++CONFIG_PPC_85xx=y
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++# CONFIG_44x is not set
++# CONFIG_E200 is not set
++CONFIG_E500=y
++CONFIG_BOOKE=y
++CONFIG_FSL_BOOKE=y
++CONFIG_FSL_EMB_PERFMON=y
++# CONFIG_PHYS_64BIT is not set
++CONFIG_SPE=y
++# CONFIG_PPC_MM_SLICES is not set
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFAULT_UIMAGE=y
++# CONFIG_PPC_DCR_NATIVE is not set
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++CONFIG_FAIR_GROUP_SCHED=y
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++# CONFIG_KALLSYMS is not set
++# CONFIG_HOTPLUG is not set
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++# CONFIG_EPOLL is not set
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++# CONFIG_MODULES is not set
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++
++#
++# Platform support
++#
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++CONFIG_MPC85xx=y
++# CONFIG_MPC8540_ADS is not set
++# CONFIG_MPC8560_ADS is not set
++# CONFIG_MPC85xx_CDS is not set
++# CONFIG_MPC85xx_MDS is not set
++# CONFIG_MPC85xx_DS is not set
++# CONFIG_STX_GP3 is not set
++# CONFIG_TQM8540 is not set
++# CONFIG_TQM8541 is not set
++# CONFIG_TQM8555 is not set
++CONFIG_TQM8560=y
++# CONFIG_SBC8548 is not set
++# CONFIG_SBC8560 is not set
++CONFIG_TQM85xx=y
++# CONFIG_IPIC is not set
++CONFIG_MPIC=y
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++CONFIG_CPM2=y
++CONFIG_PPC_CPM_NEW_BINDING=y
++# CONFIG_FSL_ULI1575 is not set
++CONFIG_CPM=y
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++# CONFIG_TICK_ONESHOT is not set
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++CONFIG_MATH_EMULATION=y
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_PROC_DEVICETREE is not set
++# CONFIG_CMDLINE_BOOL is not set
++# CONFIG_PM is not set
++CONFIG_SECCOMP=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_FSL_SOC=y
++CONFIG_FSL_PCI=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++# CONFIG_PCIEPORTBUS is not set
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++CONFIG_PCI_LEGACY=y
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_BOOT_LOAD=0x00800000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++CONFIG_MTD_CONCAT=y
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_OF_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PHYSMAP is not set
++# CONFIG_MTD_PHYSMAP_OF is not set
++# CONFIG_MTD_INTEL_VR_NOR is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_PMC551 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=32768
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_SGI_IOC4 is not set
++# CONFIG_TIFM_CORE is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++CONFIG_IDE=y
++CONFIG_IDE_MAX_HWIFS=4
++CONFIG_BLK_DEV_IDE=y
++
++#
++# Please see Documentation/ide/ide.txt for help/info on IDE drives
++#
++# CONFIG_BLK_DEV_IDE_SATA is not set
++CONFIG_BLK_DEV_IDEDISK=y
++# CONFIG_IDEDISK_MULTI_MODE is not set
++# CONFIG_BLK_DEV_IDECD is not set
++# CONFIG_BLK_DEV_IDETAPE is not set
++# CONFIG_BLK_DEV_IDEFLOPPY is not set
++# CONFIG_IDE_TASK_IOCTL is not set
++CONFIG_IDE_PROC_FS=y
++
++#
++# IDE chipset support/bugfixes
++#
++CONFIG_IDE_GENERIC=y
++# CONFIG_BLK_DEV_PLATFORM is not set
++CONFIG_BLK_DEV_IDEDMA_SFF=y
++
++#
++# PCI IDE chipsets support
++#
++CONFIG_BLK_DEV_IDEPCI=y
++CONFIG_IDEPCI_PCIBUS_ORDER=y
++# CONFIG_BLK_DEV_OFFBOARD is not set
++CONFIG_BLK_DEV_GENERIC=y
++# CONFIG_BLK_DEV_OPTI621 is not set
++CONFIG_BLK_DEV_IDEDMA_PCI=y
++# CONFIG_BLK_DEV_AEC62XX is not set
++# CONFIG_BLK_DEV_ALI15X3 is not set
++# CONFIG_BLK_DEV_AMD74XX is not set
++# CONFIG_BLK_DEV_CMD64X is not set
++# CONFIG_BLK_DEV_TRIFLEX is not set
++# CONFIG_BLK_DEV_CY82C693 is not set
++# CONFIG_BLK_DEV_CS5520 is not set
++# CONFIG_BLK_DEV_CS5530 is not set
++# CONFIG_BLK_DEV_HPT34X is not set
++# CONFIG_BLK_DEV_HPT366 is not set
++# CONFIG_BLK_DEV_JMICRON is not set
++# CONFIG_BLK_DEV_SC1200 is not set
++# CONFIG_BLK_DEV_PIIX is not set
++# CONFIG_BLK_DEV_IT8213 is not set
++# CONFIG_BLK_DEV_IT821X is not set
++# CONFIG_BLK_DEV_NS87415 is not set
++# CONFIG_BLK_DEV_PDC202XX_OLD is not set
++# CONFIG_BLK_DEV_PDC202XX_NEW is not set
++# CONFIG_BLK_DEV_SVWKS is not set
++# CONFIG_BLK_DEV_SIIMAGE is not set
++# CONFIG_BLK_DEV_SL82C105 is not set
++# CONFIG_BLK_DEV_SLC90E66 is not set
++# CONFIG_BLK_DEV_TRM290 is not set
++CONFIG_BLK_DEV_VIA82CXXX=y
++# CONFIG_BLK_DEV_TC86C001 is not set
++CONFIG_BLK_DEV_IDEDMA=y
++CONFIG_IDE_ARCH_OBSOLETE_INIT=y
++# CONFIG_BLK_DEV_HD is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++CONFIG_NET_PCI=y
++# CONFIG_PCNET32 is not set
++# CONFIG_AMD8111_ETH is not set
++# CONFIG_ADAPTEC_STARFIRE is not set
++# CONFIG_B44 is not set
++# CONFIG_FORCEDETH is not set
++# CONFIG_EEPRO100 is not set
++CONFIG_E100=y
++# CONFIG_FEALNX is not set
++# CONFIG_NATSEMI is not set
++# CONFIG_NE2K_PCI is not set
++# CONFIG_8139CP is not set
++# CONFIG_8139TOO is not set
++# CONFIG_R6040 is not set
++# CONFIG_SIS900 is not set
++# CONFIG_EPIC100 is not set
++# CONFIG_SUNDANCE is not set
++# CONFIG_TLAN is not set
++# CONFIG_VIA_RHINE is not set
++# CONFIG_SC92031 is not set
++# CONFIG_FS_ENET is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++# CONFIG_E1000 is not set
++# CONFIG_E1000E is not set
++# CONFIG_E1000E_ENABLED is not set
++# CONFIG_IP1000 is not set
++# CONFIG_IGB is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++# CONFIG_R8169 is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_VIA_VELOCITY is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++CONFIG_GIANFAR=y
++CONFIG_GFAR_NAPI=y
++# CONFIG_QLA3XXX is not set
++# CONFIG_ATL1 is not set
++CONFIG_NETDEV_10000=y
++# CONFIG_CHELSIO_T1 is not set
++# CONFIG_CHELSIO_T3 is not set
++# CONFIG_IXGBE is not set
++# CONFIG_IXGB is not set
++# CONFIG_S2IO is not set
++# CONFIG_MYRI10GE is not set
++# CONFIG_NETXEN_NIC is not set
++# CONFIG_NIU is not set
++# CONFIG_MLX4_CORE is not set
++# CONFIG_TEHUTI is not set
++# CONFIG_BNX2X is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_PCI=y
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++# CONFIG_SERIAL_8250_EXTENDED is not set
++CONFIG_SERIAL_8250_SHARE_IRQ=y
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_SERIAL_CPM=y
++CONFIG_SERIAL_CPM_CONSOLE=y
++CONFIG_SERIAL_CPM_SCC1=y
++# CONFIG_SERIAL_CPM_SCC2 is not set
++# CONFIG_SERIAL_CPM_SCC3 is not set
++# CONFIG_SERIAL_CPM_SCC4 is not set
++# CONFIG_SERIAL_CPM_SMC1 is not set
++# CONFIG_SERIAL_CPM_SMC2 is not set
++# CONFIG_SERIAL_JSM is not set
++# CONFIG_SERIAL_OF_PLATFORM is not set
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++CONFIG_HW_RANDOM=y
++# CONFIG_NVRAM is not set
++CONFIG_GEN_RTC=y
++# CONFIG_GEN_RTC_X is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=y
++
++#
++# I2C Algorithms
++#
++# CONFIG_I2C_ALGOBIT is not set
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++# CONFIG_I2C_ALI1535 is not set
++# CONFIG_I2C_ALI1563 is not set
++# CONFIG_I2C_ALI15X3 is not set
++# CONFIG_I2C_AMD756 is not set
++# CONFIG_I2C_AMD8111 is not set
++# CONFIG_I2C_I801 is not set
++# CONFIG_I2C_I810 is not set
++# CONFIG_I2C_PIIX4 is not set
++CONFIG_I2C_MPC=y
++# CONFIG_I2C_NFORCE2 is not set
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_PROSAVAGE is not set
++# CONFIG_I2C_SAVAGE4 is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_SIS5595 is not set
++# CONFIG_I2C_SIS630 is not set
++# CONFIG_I2C_SIS96X is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_VIA is not set
++# CONFIG_I2C_VIAPRO is not set
++# CONFIG_I2C_VOODOO3 is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_SENSORS_AD7418 is not set
++# CONFIG_SENSORS_ADM1021 is not set
++# CONFIG_SENSORS_ADM1025 is not set
++# CONFIG_SENSORS_ADM1026 is not set
++# CONFIG_SENSORS_ADM1029 is not set
++# CONFIG_SENSORS_ADM1031 is not set
++# CONFIG_SENSORS_ADM9240 is not set
++# CONFIG_SENSORS_ADT7470 is not set
++# CONFIG_SENSORS_ADT7473 is not set
++# CONFIG_SENSORS_ATXP1 is not set
++# CONFIG_SENSORS_DS1621 is not set
++# CONFIG_SENSORS_I5K_AMB is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_F71882FG is not set
++# CONFIG_SENSORS_F75375S is not set
++# CONFIG_SENSORS_GL518SM is not set
++# CONFIG_SENSORS_GL520SM is not set
++# CONFIG_SENSORS_IT87 is not set
++# CONFIG_SENSORS_LM63 is not set
++CONFIG_SENSORS_LM75=y
++# CONFIG_SENSORS_LM77 is not set
++# CONFIG_SENSORS_LM78 is not set
++# CONFIG_SENSORS_LM80 is not set
++# CONFIG_SENSORS_LM83 is not set
++# CONFIG_SENSORS_LM85 is not set
++# CONFIG_SENSORS_LM87 is not set
++# CONFIG_SENSORS_LM90 is not set
++# CONFIG_SENSORS_LM92 is not set
++# CONFIG_SENSORS_LM93 is not set
++# CONFIG_SENSORS_MAX1619 is not set
++# CONFIG_SENSORS_MAX6650 is not set
++# CONFIG_SENSORS_PC87360 is not set
++# CONFIG_SENSORS_PC87427 is not set
++# CONFIG_SENSORS_SIS5595 is not set
++# CONFIG_SENSORS_DME1737 is not set
++# CONFIG_SENSORS_SMSC47M1 is not set
++# CONFIG_SENSORS_SMSC47M192 is not set
++# CONFIG_SENSORS_SMSC47B397 is not set
++# CONFIG_SENSORS_ADS7828 is not set
++# CONFIG_SENSORS_THMC50 is not set
++# CONFIG_SENSORS_VIA686A is not set
++# CONFIG_SENSORS_VT1211 is not set
++# CONFIG_SENSORS_VT8231 is not set
++# CONFIG_SENSORS_W83781D is not set
++# CONFIG_SENSORS_W83791D is not set
++# CONFIG_SENSORS_W83792D is not set
++# CONFIG_SENSORS_W83793 is not set
++# CONFIG_SENSORS_W83L785TS is not set
++# CONFIG_SENSORS_W83L786NG is not set
++# CONFIG_SENSORS_W83627HF is not set
++# CONFIG_SENSORS_W83627EHF is not set
++CONFIG_HWMON_DEBUG_CHIP=y
++# CONFIG_THERMAL is not set
++# CONFIG_WATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++
++#
++# Graphics support
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++# CONFIG_USB is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++# CONFIG_RTC_CLASS is not set
++# CONFIG_DMADEVICES is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++CONFIG_CRAMFS=y
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++# CONFIG_NFS_V3 is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++# CONFIG_MAC_PARTITION is not set
++# CONFIG_MSDOS_PARTITION is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++# CONFIG_MAGIC_SYSRQ is not set
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_DEBUG_KERNEL is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_KGDB_CONSOLE is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++# CONFIG_CRYPTO_SEQIV is not set
++# CONFIG_CRYPTO_MANAGER is not set
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++# CONFIG_CRYPTO_MD5 is not set
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_ECB is not set
++# CONFIG_CRYPTO_CBC is not set
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++# CONFIG_CRYPTO_DES is not set
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_CRYPTO_DEV_HIFN_795X is not set
++# CONFIG_PPC_CLOCK is not set
++CONFIG_PPC_LIB_RHEAP=y
+--- a/arch/powerpc/configs/bamboo_defconfig
++++ /dev/null
+@@ -1,815 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc2
+-# Fri Feb 15 21:36:39 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-# CONFIG_6xx is not set
+-# CONFIG_PPC_85xx is not set
+-# CONFIG_PPC_8xx is not set
+-# CONFIG_40x is not set
+-CONFIG_44x=y
+-# CONFIG_E200 is not set
+-CONFIG_PPC_FPU=y
+-CONFIG_4xx=y
+-CONFIG_BOOKE=y
+-CONFIG_PTE_64BIT=y
+-CONFIG_PHYS_64BIT=y
+-# CONFIG_PPC_MM_SLICES is not set
+-CONFIG_NOT_COHERENT_CACHE=y
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-# CONFIG_DEFAULT_UIMAGE is not set
+-CONFIG_PPC_DCR_NATIVE=y
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_PPC_DCR=y
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-CONFIG_POSIX_MQUEUE=y
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-CONFIG_FAIR_GROUP_SCHED=y
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-CONFIG_KALLSYMS=y
+-# CONFIG_KALLSYMS_ALL is not set
+-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-CONFIG_EPOLL=y
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLUB_DEBUG=y
+-# CONFIG_SLAB is not set
+-CONFIG_SLUB=y
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-# CONFIG_KPROBES is not set
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-CONFIG_MODULES=y
+-CONFIG_MODULE_UNLOAD=y
+-# CONFIG_MODULE_FORCE_UNLOAD is not set
+-# CONFIG_MODVERSIONS is not set
+-# CONFIG_MODULE_SRCVERSION_ALL is not set
+-CONFIG_KMOD=y
+-CONFIG_BLOCK=y
+-CONFIG_LBD=y
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-# CONFIG_PREEMPT_RCU is not set
+-# CONFIG_PPC4xx_PCI_EXPRESS is not set
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-CONFIG_BAMBOO=y
+-# CONFIG_EBONY is not set
+-# CONFIG_SEQUOIA is not set
+-# CONFIG_TAISHAN is not set
+-# CONFIG_KATMAI is not set
+-# CONFIG_RAINIER is not set
+-# CONFIG_WARP is not set
+-CONFIG_440EP=y
+-CONFIG_IBM440EP_ERR42=y
+-# CONFIG_IPIC is not set
+-# CONFIG_MPIC is not set
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-# CONFIG_FSL_ULI1575 is not set
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-# CONFIG_TICK_ONESHOT is not set
+-# CONFIG_NO_HZ is not set
+-# CONFIG_HIGH_RES_TIMERS is not set
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_RCU_TRACE=y
+-CONFIG_BINFMT_ELF=y
+-# CONFIG_BINFMT_MISC is not set
+-# CONFIG_MATH_EMULATION is not set
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-CONFIG_RESOURCES_64BIT=y
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-CONFIG_PROC_DEVICETREE=y
+-CONFIG_CMDLINE_BOOL=y
+-CONFIG_CMDLINE=""
+-CONFIG_SECCOMP=y
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_PCI=y
+-CONFIG_PCI_DOMAINS=y
+-CONFIG_PCI_SYSCALL=y
+-# CONFIG_PCIEPORTBUS is not set
+-CONFIG_ARCH_SUPPORTS_MSI=y
+-# CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
+-# CONFIG_PCI_DEBUG is not set
+-# CONFIG_PCCARD is not set
+-# CONFIG_HOTPLUG_PCI is not set
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_CONSISTENT_START=0xff100000
+-CONFIG_CONSISTENT_SIZE=0x00200000
+-CONFIG_BOOT_LOAD=0x01000000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-# CONFIG_IP_MULTICAST is not set
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_ARPD is not set
+-# CONFIG_SYN_COOKIES is not set
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_BEET is not set
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-CONFIG_FW_LOADER=y
+-# CONFIG_DEBUG_DRIVER is not set
+-# CONFIG_DEBUG_DEVRES is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-CONFIG_CONNECTOR=y
+-CONFIG_PROC_EVENTS=y
+-# CONFIG_MTD is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_CPQ_DA is not set
+-# CONFIG_BLK_CPQ_CISS_DA is not set
+-# CONFIG_BLK_DEV_DAC960 is not set
+-# CONFIG_BLK_DEV_UMEM is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-# CONFIG_BLK_DEV_LOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-# CONFIG_BLK_DEV_SX8 is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=35000
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-# CONFIG_XILINX_SYSACE is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_PHANTOM is not set
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_SGI_IOC4 is not set
+-# CONFIG_TIFM_CORE is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-# CONFIG_IDE is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-# CONFIG_SCSI is not set
+-# CONFIG_SCSI_DMA is not set
+-# CONFIG_SCSI_NETLINK is not set
+-# CONFIG_ATA is not set
+-# CONFIG_MD is not set
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-# CONFIG_FIREWIRE is not set
+-# CONFIG_IEEE1394 is not set
+-# CONFIG_I2O is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_ARCNET is not set
+-# CONFIG_PHYLIB is not set
+-CONFIG_NET_ETHERNET=y
+-# CONFIG_MII is not set
+-# CONFIG_HAPPYMEAL is not set
+-# CONFIG_SUNGEM is not set
+-# CONFIG_CASSINI is not set
+-# CONFIG_NET_VENDOR_3COM is not set
+-# CONFIG_NET_TULIP is not set
+-# CONFIG_HP100 is not set
+-CONFIG_IBM_NEW_EMAC=y
+-CONFIG_IBM_NEW_EMAC_RXB=128
+-CONFIG_IBM_NEW_EMAC_TXB=64
+-CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+-CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+-CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+-# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+-CONFIG_IBM_NEW_EMAC_ZMII=y
+-# CONFIG_IBM_NEW_EMAC_RGMII is not set
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-# CONFIG_NET_PCI is not set
+-# CONFIG_B44 is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_ACENIC is not set
+-# CONFIG_DL2K is not set
+-# CONFIG_E1000 is not set
+-# CONFIG_E1000E is not set
+-# CONFIG_E1000E_ENABLED is not set
+-# CONFIG_IP1000 is not set
+-# CONFIG_IGB is not set
+-# CONFIG_NS83820 is not set
+-# CONFIG_HAMACHI is not set
+-# CONFIG_YELLOWFIN is not set
+-# CONFIG_R8169 is not set
+-# CONFIG_SIS190 is not set
+-# CONFIG_SKGE is not set
+-# CONFIG_SKY2 is not set
+-# CONFIG_SK98LIN is not set
+-# CONFIG_VIA_VELOCITY is not set
+-# CONFIG_TIGON3 is not set
+-# CONFIG_BNX2 is not set
+-# CONFIG_QLA3XXX is not set
+-# CONFIG_ATL1 is not set
+-CONFIG_NETDEV_10000=y
+-# CONFIG_CHELSIO_T1 is not set
+-# CONFIG_CHELSIO_T3 is not set
+-# CONFIG_IXGBE is not set
+-# CONFIG_IXGB is not set
+-# CONFIG_S2IO is not set
+-# CONFIG_MYRI10GE is not set
+-# CONFIG_NETXEN_NIC is not set
+-# CONFIG_NIU is not set
+-# CONFIG_MLX4_CORE is not set
+-# CONFIG_TEHUTI is not set
+-# CONFIG_BNX2X is not set
+-# CONFIG_TR is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-# CONFIG_WAN is not set
+-# CONFIG_FDDI is not set
+-# CONFIG_HIPPI is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-# CONFIG_INPUT is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-# CONFIG_NOZOMI is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-# CONFIG_SERIAL_8250_PCI is not set
+-CONFIG_SERIAL_8250_NR_UARTS=4
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-CONFIG_SERIAL_8250_EXTENDED=y
+-# CONFIG_SERIAL_8250_MANY_PORTS is not set
+-CONFIG_SERIAL_8250_SHARE_IRQ=y
+-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+-# CONFIG_SERIAL_8250_RSA is not set
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_JSM is not set
+-CONFIG_SERIAL_OF_PLATFORM=y
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-# CONFIG_HW_RANDOM is not set
+-# CONFIG_NVRAM is not set
+-# CONFIG_GEN_RTC is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_APPLICOM is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_DEVPORT=y
+-# CONFIG_I2C is not set
+-
+-#
+-# SPI support
+-#
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-# CONFIG_HWMON is not set
+-CONFIG_THERMAL=y
+-# CONFIG_WATCHDOG is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-CONFIG_DAB=y
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_AGP is not set
+-# CONFIG_DRM is not set
+-# CONFIG_VGASTATE is not set
+-CONFIG_VIDEO_OUTPUT_CONTROL=m
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-CONFIG_USB_SUPPORT=y
+-CONFIG_USB_ARCH_HAS_HCD=y
+-CONFIG_USB_ARCH_HAS_OHCI=y
+-CONFIG_USB_ARCH_HAS_EHCI=y
+-# CONFIG_USB is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_INFINIBAND is not set
+-# CONFIG_EDAC is not set
+-# CONFIG_RTC_CLASS is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-# CONFIG_EXT3_FS is not set
+-# CONFIG_EXT4DEV_FS is not set
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-# CONFIG_MSDOS_FS is not set
+-# CONFIG_VFAT_FS is not set
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-CONFIG_CRAMFS=y
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-CONFIG_NFS_V3=y
+-# CONFIG_NFS_V3_ACL is not set
+-# CONFIG_NFS_V4 is not set
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_LOCKD_V4=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-# CONFIG_RPCSEC_GSS_KRB5 is not set
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-# CONFIG_PARTITION_ADVANCED is not set
+-CONFIG_MSDOS_PARTITION=y
+-# CONFIG_NLS is not set
+-# CONFIG_DLM is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_ZLIB_INFLATE=y
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-CONFIG_MAGIC_SYSRQ=y
+-# CONFIG_UNUSED_SYMBOLS is not set
+-CONFIG_DEBUG_FS=y
+-# CONFIG_HEADERS_CHECK is not set
+-CONFIG_DEBUG_KERNEL=y
+-# CONFIG_DEBUG_SHIRQ is not set
+-CONFIG_DETECT_SOFTLOCKUP=y
+-CONFIG_SCHED_DEBUG=y
+-# CONFIG_SCHEDSTATS is not set
+-# CONFIG_TIMER_STATS is not set
+-# CONFIG_SLUB_DEBUG_ON is not set
+-# CONFIG_SLUB_STATS is not set
+-# CONFIG_DEBUG_RT_MUTEXES is not set
+-# CONFIG_RT_MUTEX_TESTER is not set
+-# CONFIG_DEBUG_SPINLOCK is not set
+-# CONFIG_DEBUG_MUTEXES is not set
+-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+-# CONFIG_DEBUG_KOBJECT is not set
+-# CONFIG_DEBUG_BUGVERBOSE is not set
+-# CONFIG_DEBUG_INFO is not set
+-# CONFIG_DEBUG_VM is not set
+-# CONFIG_DEBUG_LIST is not set
+-# CONFIG_DEBUG_SG is not set
+-# CONFIG_BOOT_PRINTK_DELAY is not set
+-# CONFIG_RCU_TORTURE_TEST is not set
+-# CONFIG_BACKTRACE_SELF_TEST is not set
+-# CONFIG_FAULT_INJECTION is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_DEBUG_STACKOVERFLOW is not set
+-# CONFIG_DEBUG_STACK_USAGE is not set
+-# CONFIG_DEBUG_PAGEALLOC is not set
+-CONFIG_DEBUGGER=y
+-# CONFIG_KGDB is not set
+-# CONFIG_XMON is not set
+-# CONFIG_VIRQ_DEBUG is not set
+-# CONFIG_BDI_SWITCH is not set
+-# CONFIG_PPC_EARLY_DEBUG is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_BLKCIPHER=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-CONFIG_CRYPTO_MANAGER=y
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-CONFIG_CRYPTO_MD5=y
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-CONFIG_CRYPTO_ECB=y
+-CONFIG_CRYPTO_CBC=y
+-CONFIG_CRYPTO_PCBC=y
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-CONFIG_CRYPTO_DES=y
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_TEST is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+-# CONFIG_PPC_CLOCK is not set
+--- a/arch/powerpc/configs/chrp32_defconfig
++++ b/arch/powerpc/configs/chrp32_defconfig
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+ # Linux kernel version: 2.6.25-rc6
+-# Thu Mar 20 10:33:36 2008
++# Thu Mar 27 13:55:37 2008
+ #
+ # CONFIG_PPC64 is not set
+ 
+@@ -74,8 +74,6 @@ CONFIG_IKCONFIG_PROC=y
+ CONFIG_LOG_BUF_SHIFT=15
+ # CONFIG_CGROUPS is not set
+ # CONFIG_GROUP_SCHED is not set
+-# CONFIG_USER_SCHED is not set
+-# CONFIG_CGROUP_SCHED is not set
+ CONFIG_SYSFS_DEPRECATED=y
+ CONFIG_SYSFS_DEPRECATED_V2=y
+ # CONFIG_RELAY is not set
+@@ -243,7 +241,7 @@ CONFIG_PCI_SYSCALL=y
+ # CONFIG_PCIEPORTBUS is not set
+ CONFIG_ARCH_SUPPORTS_MSI=y
+ # CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
++# CONFIG_PCI_LEGACY is not set
+ # CONFIG_PCI_DEBUG is not set
+ # CONFIG_PCCARD is not set
+ # CONFIG_HOTPLUG_PCI is not set
+@@ -1328,6 +1326,7 @@ CONFIG_PLIST=y
+ CONFIG_HAS_IOMEM=y
+ CONFIG_HAS_IOPORT=y
+ CONFIG_HAS_DMA=y
++CONFIG_HAVE_LMB=y
+ 
+ #
+ # Kernel hacking
+--- a/arch/powerpc/configs/ebony_defconfig
++++ /dev/null
+@@ -1,898 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc2
+-# Fri Feb 15 21:50:44 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-# CONFIG_6xx is not set
+-# CONFIG_PPC_85xx is not set
+-# CONFIG_PPC_8xx is not set
+-# CONFIG_40x is not set
+-CONFIG_44x=y
+-# CONFIG_E200 is not set
+-CONFIG_4xx=y
+-CONFIG_BOOKE=y
+-CONFIG_PTE_64BIT=y
+-CONFIG_PHYS_64BIT=y
+-# CONFIG_PPC_MM_SLICES is not set
+-CONFIG_NOT_COHERENT_CACHE=y
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-# CONFIG_DEFAULT_UIMAGE is not set
+-CONFIG_PPC_DCR_NATIVE=y
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_PPC_DCR=y
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-CONFIG_POSIX_MQUEUE=y
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-CONFIG_FAIR_GROUP_SCHED=y
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-CONFIG_KALLSYMS=y
+-CONFIG_KALLSYMS_ALL=y
+-CONFIG_KALLSYMS_EXTRA_PASS=y
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-CONFIG_EPOLL=y
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLUB_DEBUG=y
+-# CONFIG_SLAB is not set
+-CONFIG_SLUB=y
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-# CONFIG_KPROBES is not set
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-CONFIG_MODULES=y
+-CONFIG_MODULE_UNLOAD=y
+-# CONFIG_MODULE_FORCE_UNLOAD is not set
+-# CONFIG_MODVERSIONS is not set
+-# CONFIG_MODULE_SRCVERSION_ALL is not set
+-CONFIG_KMOD=y
+-CONFIG_BLOCK=y
+-CONFIG_LBD=y
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-# CONFIG_PREEMPT_RCU is not set
+-# CONFIG_PPC4xx_PCI_EXPRESS is not set
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-# CONFIG_BAMBOO is not set
+-CONFIG_EBONY=y
+-# CONFIG_SEQUOIA is not set
+-# CONFIG_TAISHAN is not set
+-# CONFIG_KATMAI is not set
+-# CONFIG_RAINIER is not set
+-# CONFIG_WARP is not set
+-CONFIG_440GP=y
+-# CONFIG_IPIC is not set
+-# CONFIG_MPIC is not set
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-# CONFIG_FSL_ULI1575 is not set
+-CONFIG_OF_RTC=y
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-# CONFIG_TICK_ONESHOT is not set
+-# CONFIG_NO_HZ is not set
+-# CONFIG_HIGH_RES_TIMERS is not set
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_RCU_TRACE=y
+-CONFIG_BINFMT_ELF=y
+-# CONFIG_BINFMT_MISC is not set
+-CONFIG_MATH_EMULATION=y
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-CONFIG_RESOURCES_64BIT=y
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-CONFIG_PROC_DEVICETREE=y
+-# CONFIG_CMDLINE_BOOL is not set
+-CONFIG_SECCOMP=y
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_PCI=y
+-CONFIG_PCI_DOMAINS=y
+-CONFIG_PCI_SYSCALL=y
+-# CONFIG_PCIEPORTBUS is not set
+-CONFIG_ARCH_SUPPORTS_MSI=y
+-# CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
+-# CONFIG_PCI_DEBUG is not set
+-# CONFIG_PCCARD is not set
+-# CONFIG_HOTPLUG_PCI is not set
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_CONSISTENT_START=0xff100000
+-CONFIG_CONSISTENT_SIZE=0x00200000
+-CONFIG_BOOT_LOAD=0x01000000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-# CONFIG_IP_MULTICAST is not set
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_ARPD is not set
+-# CONFIG_SYN_COOKIES is not set
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_BEET is not set
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-CONFIG_FW_LOADER=y
+-# CONFIG_DEBUG_DRIVER is not set
+-# CONFIG_DEBUG_DEVRES is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-CONFIG_CONNECTOR=y
+-CONFIG_PROC_EVENTS=y
+-CONFIG_MTD=y
+-# CONFIG_MTD_DEBUG is not set
+-# CONFIG_MTD_CONCAT is not set
+-CONFIG_MTD_PARTITIONS=y
+-# CONFIG_MTD_REDBOOT_PARTS is not set
+-# CONFIG_MTD_CMDLINE_PARTS is not set
+-CONFIG_MTD_OF_PARTS=y
+-
+-#
+-# User Modules And Translation Layers
+-#
+-CONFIG_MTD_CHAR=y
+-CONFIG_MTD_BLKDEVS=y
+-CONFIG_MTD_BLOCK=y
+-# CONFIG_FTL is not set
+-# CONFIG_NFTL is not set
+-# CONFIG_INFTL is not set
+-# CONFIG_RFD_FTL is not set
+-# CONFIG_SSFDC is not set
+-# CONFIG_MTD_OOPS is not set
+-
+-#
+-# RAM/ROM/Flash chip drivers
+-#
+-CONFIG_MTD_CFI=y
+-CONFIG_MTD_JEDECPROBE=y
+-CONFIG_MTD_GEN_PROBE=y
+-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+-CONFIG_MTD_MAP_BANK_WIDTH_1=y
+-CONFIG_MTD_MAP_BANK_WIDTH_2=y
+-CONFIG_MTD_MAP_BANK_WIDTH_4=y
+-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+-CONFIG_MTD_CFI_I1=y
+-CONFIG_MTD_CFI_I2=y
+-# CONFIG_MTD_CFI_I4 is not set
+-# CONFIG_MTD_CFI_I8 is not set
+-# CONFIG_MTD_CFI_INTELEXT is not set
+-CONFIG_MTD_CFI_AMDSTD=y
+-# CONFIG_MTD_CFI_STAA is not set
+-CONFIG_MTD_CFI_UTIL=y
+-# CONFIG_MTD_RAM is not set
+-# CONFIG_MTD_ROM is not set
+-# CONFIG_MTD_ABSENT is not set
+-
+-#
+-# Mapping drivers for chip access
+-#
+-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+-# CONFIG_MTD_PHYSMAP is not set
+-CONFIG_MTD_PHYSMAP_OF=y
+-# CONFIG_MTD_INTEL_VR_NOR is not set
+-# CONFIG_MTD_PLATRAM is not set
+-
+-#
+-# Self-contained MTD device drivers
+-#
+-# CONFIG_MTD_PMC551 is not set
+-# CONFIG_MTD_SLRAM is not set
+-# CONFIG_MTD_PHRAM is not set
+-# CONFIG_MTD_MTDRAM is not set
+-# CONFIG_MTD_BLOCK2MTD is not set
+-
+-#
+-# Disk-On-Chip Device Drivers
+-#
+-# CONFIG_MTD_DOC2000 is not set
+-# CONFIG_MTD_DOC2001 is not set
+-# CONFIG_MTD_DOC2001PLUS is not set
+-# CONFIG_MTD_NAND is not set
+-# CONFIG_MTD_ONENAND is not set
+-
+-#
+-# UBI - Unsorted block images
+-#
+-# CONFIG_MTD_UBI is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_CPQ_DA is not set
+-# CONFIG_BLK_CPQ_CISS_DA is not set
+-# CONFIG_BLK_DEV_DAC960 is not set
+-# CONFIG_BLK_DEV_UMEM is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-# CONFIG_BLK_DEV_LOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-# CONFIG_BLK_DEV_SX8 is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=35000
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-# CONFIG_XILINX_SYSACE is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_PHANTOM is not set
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_SGI_IOC4 is not set
+-# CONFIG_TIFM_CORE is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-# CONFIG_IDE is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-# CONFIG_SCSI is not set
+-# CONFIG_SCSI_DMA is not set
+-# CONFIG_SCSI_NETLINK is not set
+-# CONFIG_ATA is not set
+-# CONFIG_MD is not set
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-# CONFIG_FIREWIRE is not set
+-# CONFIG_IEEE1394 is not set
+-# CONFIG_I2O is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_ARCNET is not set
+-# CONFIG_PHYLIB is not set
+-CONFIG_NET_ETHERNET=y
+-# CONFIG_MII is not set
+-# CONFIG_HAPPYMEAL is not set
+-# CONFIG_SUNGEM is not set
+-# CONFIG_CASSINI is not set
+-# CONFIG_NET_VENDOR_3COM is not set
+-# CONFIG_NET_TULIP is not set
+-# CONFIG_HP100 is not set
+-CONFIG_IBM_NEW_EMAC=y
+-CONFIG_IBM_NEW_EMAC_RXB=128
+-CONFIG_IBM_NEW_EMAC_TXB=64
+-CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+-CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+-CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+-# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+-CONFIG_IBM_NEW_EMAC_ZMII=y
+-# CONFIG_IBM_NEW_EMAC_RGMII is not set
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-# CONFIG_NET_PCI is not set
+-# CONFIG_B44 is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_ACENIC is not set
+-# CONFIG_DL2K is not set
+-# CONFIG_E1000 is not set
+-# CONFIG_E1000E is not set
+-# CONFIG_E1000E_ENABLED is not set
+-# CONFIG_IP1000 is not set
+-# CONFIG_IGB is not set
+-# CONFIG_NS83820 is not set
+-# CONFIG_HAMACHI is not set
+-# CONFIG_YELLOWFIN is not set
+-# CONFIG_R8169 is not set
+-# CONFIG_SIS190 is not set
+-# CONFIG_SKGE is not set
+-# CONFIG_SKY2 is not set
+-# CONFIG_SK98LIN is not set
+-# CONFIG_VIA_VELOCITY is not set
+-# CONFIG_TIGON3 is not set
+-# CONFIG_BNX2 is not set
+-# CONFIG_QLA3XXX is not set
+-# CONFIG_ATL1 is not set
+-CONFIG_NETDEV_10000=y
+-# CONFIG_CHELSIO_T1 is not set
+-# CONFIG_CHELSIO_T3 is not set
+-# CONFIG_IXGBE is not set
+-# CONFIG_IXGB is not set
+-# CONFIG_S2IO is not set
+-# CONFIG_MYRI10GE is not set
+-# CONFIG_NETXEN_NIC is not set
+-# CONFIG_NIU is not set
+-# CONFIG_MLX4_CORE is not set
+-# CONFIG_TEHUTI is not set
+-# CONFIG_BNX2X is not set
+-# CONFIG_TR is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-# CONFIG_WAN is not set
+-# CONFIG_FDDI is not set
+-# CONFIG_HIPPI is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-# CONFIG_INPUT is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-# CONFIG_NOZOMI is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-# CONFIG_SERIAL_8250_PCI is not set
+-CONFIG_SERIAL_8250_NR_UARTS=4
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-CONFIG_SERIAL_8250_EXTENDED=y
+-# CONFIG_SERIAL_8250_MANY_PORTS is not set
+-CONFIG_SERIAL_8250_SHARE_IRQ=y
+-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+-# CONFIG_SERIAL_8250_RSA is not set
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_JSM is not set
+-CONFIG_SERIAL_OF_PLATFORM=y
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-# CONFIG_HW_RANDOM is not set
+-# CONFIG_NVRAM is not set
+-# CONFIG_GEN_RTC is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_APPLICOM is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_DEVPORT=y
+-# CONFIG_I2C is not set
+-
+-#
+-# SPI support
+-#
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-# CONFIG_HWMON is not set
+-CONFIG_THERMAL=y
+-# CONFIG_WATCHDOG is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-# CONFIG_DAB is not set
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_AGP is not set
+-# CONFIG_DRM is not set
+-# CONFIG_VGASTATE is not set
+-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-CONFIG_USB_SUPPORT=y
+-CONFIG_USB_ARCH_HAS_HCD=y
+-CONFIG_USB_ARCH_HAS_OHCI=y
+-CONFIG_USB_ARCH_HAS_EHCI=y
+-# CONFIG_USB is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_INFINIBAND is not set
+-# CONFIG_EDAC is not set
+-# CONFIG_RTC_CLASS is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-# CONFIG_EXT3_FS is not set
+-# CONFIG_EXT4DEV_FS is not set
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-# CONFIG_MSDOS_FS is not set
+-# CONFIG_VFAT_FS is not set
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-CONFIG_JFFS2_FS=y
+-CONFIG_JFFS2_FS_DEBUG=0
+-CONFIG_JFFS2_FS_WRITEBUFFER=y
+-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+-# CONFIG_JFFS2_SUMMARY is not set
+-# CONFIG_JFFS2_FS_XATTR is not set
+-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+-CONFIG_JFFS2_ZLIB=y
+-# CONFIG_JFFS2_LZO is not set
+-CONFIG_JFFS2_RTIME=y
+-# CONFIG_JFFS2_RUBIN is not set
+-CONFIG_CRAMFS=y
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-CONFIG_NFS_V3=y
+-# CONFIG_NFS_V3_ACL is not set
+-# CONFIG_NFS_V4 is not set
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_LOCKD_V4=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-# CONFIG_RPCSEC_GSS_KRB5 is not set
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-# CONFIG_PARTITION_ADVANCED is not set
+-CONFIG_MSDOS_PARTITION=y
+-# CONFIG_NLS is not set
+-# CONFIG_DLM is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_ZLIB_INFLATE=y
+-CONFIG_ZLIB_DEFLATE=y
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-CONFIG_MAGIC_SYSRQ=y
+-# CONFIG_UNUSED_SYMBOLS is not set
+-CONFIG_DEBUG_FS=y
+-# CONFIG_HEADERS_CHECK is not set
+-CONFIG_DEBUG_KERNEL=y
+-# CONFIG_DEBUG_SHIRQ is not set
+-CONFIG_DETECT_SOFTLOCKUP=y
+-CONFIG_SCHED_DEBUG=y
+-# CONFIG_SCHEDSTATS is not set
+-# CONFIG_TIMER_STATS is not set
+-# CONFIG_SLUB_DEBUG_ON is not set
+-# CONFIG_SLUB_STATS is not set
+-# CONFIG_DEBUG_RT_MUTEXES is not set
+-# CONFIG_RT_MUTEX_TESTER is not set
+-# CONFIG_DEBUG_SPINLOCK is not set
+-# CONFIG_DEBUG_MUTEXES is not set
+-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+-# CONFIG_DEBUG_KOBJECT is not set
+-CONFIG_DEBUG_BUGVERBOSE=y
+-# CONFIG_DEBUG_INFO is not set
+-# CONFIG_DEBUG_VM is not set
+-# CONFIG_DEBUG_LIST is not set
+-# CONFIG_DEBUG_SG is not set
+-# CONFIG_BOOT_PRINTK_DELAY is not set
+-# CONFIG_RCU_TORTURE_TEST is not set
+-# CONFIG_BACKTRACE_SELF_TEST is not set
+-# CONFIG_FAULT_INJECTION is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_DEBUG_STACKOVERFLOW is not set
+-# CONFIG_DEBUG_STACK_USAGE is not set
+-# CONFIG_DEBUG_PAGEALLOC is not set
+-# CONFIG_DEBUGGER is not set
+-# CONFIG_VIRQ_DEBUG is not set
+-# CONFIG_BDI_SWITCH is not set
+-# CONFIG_PPC_EARLY_DEBUG is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_BLKCIPHER=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-CONFIG_CRYPTO_MANAGER=y
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-CONFIG_CRYPTO_MD5=y
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-CONFIG_CRYPTO_ECB=y
+-CONFIG_CRYPTO_CBC=y
+-CONFIG_CRYPTO_PCBC=y
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-CONFIG_CRYPTO_DES=y
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_TEST is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-# CONFIG_CRYPTO_HW is not set
+-# CONFIG_PPC_CLOCK is not set
+--- a/arch/powerpc/configs/ep405_defconfig
++++ /dev/null
+@@ -1,968 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc2
+-# Fri Feb 15 21:50:09 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-# CONFIG_6xx is not set
+-# CONFIG_PPC_85xx is not set
+-# CONFIG_PPC_8xx is not set
+-CONFIG_40x=y
+-# CONFIG_44x is not set
+-# CONFIG_E200 is not set
+-CONFIG_4xx=y
+-# CONFIG_PPC_MM_SLICES is not set
+-CONFIG_NOT_COHERENT_CACHE=y
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-# CONFIG_DEFAULT_UIMAGE is not set
+-CONFIG_PPC_DCR_NATIVE=y
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_PPC_DCR=y
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-CONFIG_POSIX_MQUEUE=y
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-CONFIG_FAIR_GROUP_SCHED=y
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-CONFIG_KALLSYMS=y
+-CONFIG_KALLSYMS_ALL=y
+-CONFIG_KALLSYMS_EXTRA_PASS=y
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-CONFIG_EPOLL=y
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLUB_DEBUG=y
+-# CONFIG_SLAB is not set
+-CONFIG_SLUB=y
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-# CONFIG_KPROBES is not set
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-CONFIG_MODULES=y
+-CONFIG_MODULE_UNLOAD=y
+-# CONFIG_MODULE_FORCE_UNLOAD is not set
+-# CONFIG_MODVERSIONS is not set
+-# CONFIG_MODULE_SRCVERSION_ALL is not set
+-CONFIG_KMOD=y
+-CONFIG_BLOCK=y
+-CONFIG_LBD=y
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-# CONFIG_PREEMPT_RCU is not set
+-# CONFIG_PPC4xx_PCI_EXPRESS is not set
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-CONFIG_EP405=y
+-# CONFIG_KILAUEA is not set
+-# CONFIG_MAKALU is not set
+-# CONFIG_WALNUT is not set
+-# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
+-CONFIG_405GP=y
+-CONFIG_IBM405_ERR77=y
+-CONFIG_IBM405_ERR51=y
+-# CONFIG_IPIC is not set
+-# CONFIG_MPIC is not set
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-# CONFIG_FSL_ULI1575 is not set
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-# CONFIG_TICK_ONESHOT is not set
+-# CONFIG_NO_HZ is not set
+-# CONFIG_HIGH_RES_TIMERS is not set
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_RCU_TRACE=y
+-CONFIG_BINFMT_ELF=y
+-# CONFIG_BINFMT_MISC is not set
+-# CONFIG_MATH_EMULATION is not set
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_RESOURCES_64BIT is not set
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-CONFIG_PROC_DEVICETREE=y
+-# CONFIG_CMDLINE_BOOL is not set
+-# CONFIG_PM is not set
+-CONFIG_SECCOMP=y
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_PCI=y
+-CONFIG_PCI_DOMAINS=y
+-CONFIG_PCI_SYSCALL=y
+-# CONFIG_PCIEPORTBUS is not set
+-CONFIG_ARCH_SUPPORTS_MSI=y
+-# CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
+-# CONFIG_PCI_DEBUG is not set
+-# CONFIG_PCCARD is not set
+-# CONFIG_HOTPLUG_PCI is not set
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_CONSISTENT_START=0xff100000
+-CONFIG_CONSISTENT_SIZE=0x00200000
+-CONFIG_BOOT_LOAD=0x00400000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-# CONFIG_IP_MULTICAST is not set
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_ARPD is not set
+-# CONFIG_SYN_COOKIES is not set
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_BEET is not set
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-CONFIG_FW_LOADER=y
+-# CONFIG_DEBUG_DRIVER is not set
+-# CONFIG_DEBUG_DEVRES is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-CONFIG_CONNECTOR=y
+-CONFIG_PROC_EVENTS=y
+-CONFIG_MTD=y
+-# CONFIG_MTD_DEBUG is not set
+-# CONFIG_MTD_CONCAT is not set
+-CONFIG_MTD_PARTITIONS=y
+-# CONFIG_MTD_REDBOOT_PARTS is not set
+-CONFIG_MTD_CMDLINE_PARTS=y
+-CONFIG_MTD_OF_PARTS=y
+-
+-#
+-# User Modules And Translation Layers
+-#
+-CONFIG_MTD_CHAR=y
+-CONFIG_MTD_BLKDEVS=m
+-CONFIG_MTD_BLOCK=m
+-# CONFIG_MTD_BLOCK_RO is not set
+-# CONFIG_FTL is not set
+-# CONFIG_NFTL is not set
+-# CONFIG_INFTL is not set
+-# CONFIG_RFD_FTL is not set
+-# CONFIG_SSFDC is not set
+-# CONFIG_MTD_OOPS is not set
+-
+-#
+-# RAM/ROM/Flash chip drivers
+-#
+-CONFIG_MTD_CFI=y
+-CONFIG_MTD_JEDECPROBE=y
+-CONFIG_MTD_GEN_PROBE=y
+-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+-CONFIG_MTD_MAP_BANK_WIDTH_1=y
+-CONFIG_MTD_MAP_BANK_WIDTH_2=y
+-CONFIG_MTD_MAP_BANK_WIDTH_4=y
+-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+-CONFIG_MTD_CFI_I1=y
+-CONFIG_MTD_CFI_I2=y
+-# CONFIG_MTD_CFI_I4 is not set
+-# CONFIG_MTD_CFI_I8 is not set
+-# CONFIG_MTD_CFI_INTELEXT is not set
+-CONFIG_MTD_CFI_AMDSTD=y
+-# CONFIG_MTD_CFI_STAA is not set
+-CONFIG_MTD_CFI_UTIL=y
+-# CONFIG_MTD_RAM is not set
+-# CONFIG_MTD_ROM is not set
+-# CONFIG_MTD_ABSENT is not set
+-
+-#
+-# Mapping drivers for chip access
+-#
+-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+-# CONFIG_MTD_PHYSMAP is not set
+-CONFIG_MTD_PHYSMAP_OF=y
+-# CONFIG_MTD_INTEL_VR_NOR is not set
+-# CONFIG_MTD_PLATRAM is not set
+-
+-#
+-# Self-contained MTD device drivers
+-#
+-# CONFIG_MTD_PMC551 is not set
+-# CONFIG_MTD_SLRAM is not set
+-# CONFIG_MTD_PHRAM is not set
+-# CONFIG_MTD_MTDRAM is not set
+-# CONFIG_MTD_BLOCK2MTD is not set
+-
+-#
+-# Disk-On-Chip Device Drivers
+-#
+-# CONFIG_MTD_DOC2000 is not set
+-# CONFIG_MTD_DOC2001 is not set
+-# CONFIG_MTD_DOC2001PLUS is not set
+-# CONFIG_MTD_NAND is not set
+-# CONFIG_MTD_ONENAND is not set
+-
+-#
+-# UBI - Unsorted block images
+-#
+-# CONFIG_MTD_UBI is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_CPQ_DA is not set
+-# CONFIG_BLK_CPQ_CISS_DA is not set
+-# CONFIG_BLK_DEV_DAC960 is not set
+-# CONFIG_BLK_DEV_UMEM is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-# CONFIG_BLK_DEV_LOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-# CONFIG_BLK_DEV_SX8 is not set
+-# CONFIG_BLK_DEV_UB is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=35000
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-# CONFIG_XILINX_SYSACE is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_PHANTOM is not set
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_SGI_IOC4 is not set
+-# CONFIG_TIFM_CORE is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-# CONFIG_IDE is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-# CONFIG_SCSI is not set
+-# CONFIG_SCSI_DMA is not set
+-# CONFIG_SCSI_NETLINK is not set
+-# CONFIG_ATA is not set
+-# CONFIG_MD is not set
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-# CONFIG_FIREWIRE is not set
+-# CONFIG_IEEE1394 is not set
+-# CONFIG_I2O is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_ARCNET is not set
+-# CONFIG_PHYLIB is not set
+-CONFIG_NET_ETHERNET=y
+-# CONFIG_MII is not set
+-# CONFIG_HAPPYMEAL is not set
+-# CONFIG_SUNGEM is not set
+-# CONFIG_CASSINI is not set
+-# CONFIG_NET_VENDOR_3COM is not set
+-# CONFIG_NET_TULIP is not set
+-# CONFIG_HP100 is not set
+-CONFIG_IBM_NEW_EMAC=y
+-CONFIG_IBM_NEW_EMAC_RXB=128
+-CONFIG_IBM_NEW_EMAC_TXB=64
+-CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+-CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+-CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+-# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+-CONFIG_IBM_NEW_EMAC_ZMII=y
+-# CONFIG_IBM_NEW_EMAC_RGMII is not set
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-# CONFIG_NET_PCI is not set
+-# CONFIG_B44 is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_ACENIC is not set
+-# CONFIG_DL2K is not set
+-# CONFIG_E1000 is not set
+-# CONFIG_E1000E is not set
+-# CONFIG_E1000E_ENABLED is not set
+-# CONFIG_IP1000 is not set
+-# CONFIG_IGB is not set
+-# CONFIG_NS83820 is not set
+-# CONFIG_HAMACHI is not set
+-# CONFIG_YELLOWFIN is not set
+-# CONFIG_R8169 is not set
+-# CONFIG_SIS190 is not set
+-# CONFIG_SKGE is not set
+-# CONFIG_SKY2 is not set
+-# CONFIG_SK98LIN is not set
+-# CONFIG_VIA_VELOCITY is not set
+-# CONFIG_TIGON3 is not set
+-# CONFIG_BNX2 is not set
+-# CONFIG_QLA3XXX is not set
+-# CONFIG_ATL1 is not set
+-CONFIG_NETDEV_10000=y
+-# CONFIG_CHELSIO_T1 is not set
+-# CONFIG_CHELSIO_T3 is not set
+-# CONFIG_IXGBE is not set
+-# CONFIG_IXGB is not set
+-# CONFIG_S2IO is not set
+-# CONFIG_MYRI10GE is not set
+-# CONFIG_NETXEN_NIC is not set
+-# CONFIG_NIU is not set
+-# CONFIG_MLX4_CORE is not set
+-# CONFIG_TEHUTI is not set
+-# CONFIG_BNX2X is not set
+-# CONFIG_TR is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-
+-#
+-# USB Network Adapters
+-#
+-# CONFIG_USB_CATC is not set
+-# CONFIG_USB_KAWETH is not set
+-# CONFIG_USB_PEGASUS is not set
+-# CONFIG_USB_RTL8150 is not set
+-# CONFIG_USB_USBNET is not set
+-# CONFIG_WAN is not set
+-# CONFIG_FDDI is not set
+-# CONFIG_HIPPI is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-# CONFIG_INPUT is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-# CONFIG_NOZOMI is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-CONFIG_SERIAL_8250_PCI=y
+-CONFIG_SERIAL_8250_NR_UARTS=4
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-CONFIG_SERIAL_8250_EXTENDED=y
+-# CONFIG_SERIAL_8250_MANY_PORTS is not set
+-CONFIG_SERIAL_8250_SHARE_IRQ=y
+-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+-# CONFIG_SERIAL_8250_RSA is not set
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_JSM is not set
+-CONFIG_SERIAL_OF_PLATFORM=y
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-# CONFIG_HW_RANDOM is not set
+-# CONFIG_NVRAM is not set
+-# CONFIG_GEN_RTC is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_APPLICOM is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_DEVPORT=y
+-# CONFIG_I2C is not set
+-
+-#
+-# SPI support
+-#
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-# CONFIG_HWMON is not set
+-CONFIG_THERMAL=y
+-# CONFIG_WATCHDOG is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-# CONFIG_DAB is not set
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_AGP is not set
+-# CONFIG_DRM is not set
+-# CONFIG_VGASTATE is not set
+-CONFIG_VIDEO_OUTPUT_CONTROL=m
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-CONFIG_USB_SUPPORT=y
+-CONFIG_USB_ARCH_HAS_HCD=y
+-CONFIG_USB_ARCH_HAS_OHCI=y
+-CONFIG_USB_ARCH_HAS_EHCI=y
+-CONFIG_USB=y
+-# CONFIG_USB_DEBUG is not set
+-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+-
+-#
+-# Miscellaneous USB options
+-#
+-CONFIG_USB_DEVICEFS=y
+-CONFIG_USB_DEVICE_CLASS=y
+-# CONFIG_USB_DYNAMIC_MINORS is not set
+-# CONFIG_USB_OTG is not set
+-
+-#
+-# USB Host Controller Drivers
+-#
+-# CONFIG_USB_EHCI_HCD is not set
+-# CONFIG_USB_ISP116X_HCD is not set
+-CONFIG_USB_OHCI_HCD=y
+-CONFIG_USB_OHCI_HCD_PPC_OF=y
+-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+-CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+-CONFIG_USB_OHCI_HCD_PCI=y
+-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+-# CONFIG_USB_UHCI_HCD is not set
+-# CONFIG_USB_SL811_HCD is not set
+-# CONFIG_USB_R8A66597_HCD is not set
+-
+-#
+-# USB Device Class drivers
+-#
+-# CONFIG_USB_ACM is not set
+-# CONFIG_USB_PRINTER is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-
+-#
+-# may also be needed; see USB_STORAGE Help for more information
+-#
+-# CONFIG_USB_LIBUSUAL is not set
+-
+-#
+-# USB Imaging devices
+-#
+-# CONFIG_USB_MDC800 is not set
+-CONFIG_USB_MON=y
+-
+-#
+-# USB port drivers
+-#
+-# CONFIG_USB_SERIAL is not set
+-
+-#
+-# USB Miscellaneous drivers
+-#
+-# CONFIG_USB_EMI62 is not set
+-# CONFIG_USB_EMI26 is not set
+-# CONFIG_USB_ADUTUX is not set
+-# CONFIG_USB_AUERSWALD is not set
+-# CONFIG_USB_RIO500 is not set
+-# CONFIG_USB_LEGOTOWER is not set
+-# CONFIG_USB_LCD is not set
+-# CONFIG_USB_BERRY_CHARGE is not set
+-# CONFIG_USB_LED is not set
+-# CONFIG_USB_CYPRESS_CY7C63 is not set
+-# CONFIG_USB_CYTHERM is not set
+-# CONFIG_USB_PHIDGET is not set
+-# CONFIG_USB_IDMOUSE is not set
+-# CONFIG_USB_FTDI_ELAN is not set
+-# CONFIG_USB_APPLEDISPLAY is not set
+-# CONFIG_USB_LD is not set
+-# CONFIG_USB_TRANCEVIBRATOR is not set
+-# CONFIG_USB_IOWARRIOR is not set
+-# CONFIG_USB_TEST is not set
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_INFINIBAND is not set
+-# CONFIG_EDAC is not set
+-# CONFIG_RTC_CLASS is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-# CONFIG_EXT3_FS is not set
+-# CONFIG_EXT4DEV_FS is not set
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-# CONFIG_MSDOS_FS is not set
+-# CONFIG_VFAT_FS is not set
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-# CONFIG_JFFS2_FS is not set
+-CONFIG_CRAMFS=y
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-CONFIG_NFS_V3=y
+-# CONFIG_NFS_V3_ACL is not set
+-# CONFIG_NFS_V4 is not set
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_LOCKD_V4=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-# CONFIG_RPCSEC_GSS_KRB5 is not set
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-# CONFIG_PARTITION_ADVANCED is not set
+-CONFIG_MSDOS_PARTITION=y
+-# CONFIG_NLS is not set
+-# CONFIG_DLM is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_ZLIB_INFLATE=y
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-CONFIG_MAGIC_SYSRQ=y
+-# CONFIG_UNUSED_SYMBOLS is not set
+-CONFIG_DEBUG_FS=y
+-# CONFIG_HEADERS_CHECK is not set
+-CONFIG_DEBUG_KERNEL=y
+-# CONFIG_DEBUG_SHIRQ is not set
+-CONFIG_DETECT_SOFTLOCKUP=y
+-CONFIG_SCHED_DEBUG=y
+-# CONFIG_SCHEDSTATS is not set
+-# CONFIG_TIMER_STATS is not set
+-# CONFIG_SLUB_DEBUG_ON is not set
+-# CONFIG_SLUB_STATS is not set
+-# CONFIG_DEBUG_RT_MUTEXES is not set
+-# CONFIG_RT_MUTEX_TESTER is not set
+-# CONFIG_DEBUG_SPINLOCK is not set
+-# CONFIG_DEBUG_MUTEXES is not set
+-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+-# CONFIG_DEBUG_KOBJECT is not set
+-CONFIG_DEBUG_BUGVERBOSE=y
+-# CONFIG_DEBUG_INFO is not set
+-# CONFIG_DEBUG_VM is not set
+-# CONFIG_DEBUG_LIST is not set
+-# CONFIG_DEBUG_SG is not set
+-# CONFIG_BOOT_PRINTK_DELAY is not set
+-# CONFIG_RCU_TORTURE_TEST is not set
+-# CONFIG_BACKTRACE_SELF_TEST is not set
+-# CONFIG_FAULT_INJECTION is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_DEBUG_STACKOVERFLOW is not set
+-# CONFIG_DEBUG_STACK_USAGE is not set
+-# CONFIG_DEBUG_PAGEALLOC is not set
+-# CONFIG_DEBUGGER is not set
+-# CONFIG_VIRQ_DEBUG is not set
+-# CONFIG_BDI_SWITCH is not set
+-# CONFIG_PPC_EARLY_DEBUG is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_BLKCIPHER=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-CONFIG_CRYPTO_MANAGER=y
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-CONFIG_CRYPTO_MD5=y
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-CONFIG_CRYPTO_ECB=y
+-CONFIG_CRYPTO_CBC=y
+-CONFIG_CRYPTO_PCBC=y
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-CONFIG_CRYPTO_DES=y
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_TEST is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+-# CONFIG_PPC_CLOCK is not set
+--- a/arch/powerpc/configs/g5_defconfig
++++ b/arch/powerpc/configs/g5_defconfig
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+ # Linux kernel version: 2.6.25-rc6
+-# Thu Mar 20 10:36:41 2008
++# Thu Mar 27 13:55:43 2008
+ #
+ CONFIG_PPC64=y
+ 
+@@ -77,8 +77,6 @@ CONFIG_IKCONFIG_PROC=y
+ CONFIG_LOG_BUF_SHIFT=17
+ # CONFIG_CGROUPS is not set
+ # CONFIG_GROUP_SCHED is not set
+-# CONFIG_USER_SCHED is not set
+-# CONFIG_CGROUP_SCHED is not set
+ CONFIG_SYSFS_DEPRECATED=y
+ CONFIG_SYSFS_DEPRECATED_V2=y
+ # CONFIG_RELAY is not set
+@@ -276,7 +274,7 @@ CONFIG_PCI_SYSCALL=y
+ # CONFIG_PCIEPORTBUS is not set
+ CONFIG_ARCH_SUPPORTS_MSI=y
+ CONFIG_PCI_MSI=y
+-CONFIG_PCI_LEGACY=y
++# CONFIG_PCI_LEGACY is not set
+ # CONFIG_PCI_DEBUG is not set
+ # CONFIG_PCCARD is not set
+ # CONFIG_HOTPLUG_PCI is not set
+@@ -1596,6 +1594,7 @@ CONFIG_PLIST=y
+ CONFIG_HAS_IOMEM=y
+ CONFIG_HAS_IOPORT=y
+ CONFIG_HAS_DMA=y
++CONFIG_HAVE_LMB=y
+ 
+ #
+ # Kernel hacking
+--- a/arch/powerpc/configs/iseries_defconfig
++++ b/arch/powerpc/configs/iseries_defconfig
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+ # Linux kernel version: 2.6.25-rc6
+-# Thu Mar 20 10:43:46 2008
++# Thu Mar 27 13:55:45 2008
+ #
+ CONFIG_PPC64=y
+ 
+@@ -77,8 +77,6 @@ CONFIG_IKCONFIG_PROC=y
+ CONFIG_LOG_BUF_SHIFT=17
+ # CONFIG_CGROUPS is not set
+ # CONFIG_GROUP_SCHED is not set
+-# CONFIG_USER_SCHED is not set
+-# CONFIG_CGROUP_SCHED is not set
+ CONFIG_SYSFS_DEPRECATED=y
+ CONFIG_SYSFS_DEPRECATED_V2=y
+ # CONFIG_RELAY is not set
+@@ -261,7 +259,7 @@ CONFIG_PCI_SYSCALL=y
+ # CONFIG_PCIEPORTBUS is not set
+ CONFIG_ARCH_SUPPORTS_MSI=y
+ # CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
++# CONFIG_PCI_LEGACY is not set
+ # CONFIG_PCI_DEBUG is not set
+ # CONFIG_PCCARD is not set
+ # CONFIG_HOTPLUG_PCI is not set
+@@ -1065,6 +1063,7 @@ CONFIG_PLIST=y
+ CONFIG_HAS_IOMEM=y
+ CONFIG_HAS_IOPORT=y
+ CONFIG_HAS_DMA=y
++CONFIG_HAVE_LMB=y
+ 
+ #
+ # Kernel hacking
+--- a/arch/powerpc/configs/katmai_defconfig
++++ /dev/null
+@@ -1,790 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.24-rc6
+-# Mon Dec 24 11:17:43 2007
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-# CONFIG_6xx is not set
+-# CONFIG_PPC_85xx is not set
+-# CONFIG_PPC_8xx is not set
+-# CONFIG_40x is not set
+-CONFIG_44x=y
+-# CONFIG_E200 is not set
+-CONFIG_4xx=y
+-CONFIG_BOOKE=y
+-CONFIG_PTE_64BIT=y
+-CONFIG_PHYS_64BIT=y
+-# CONFIG_PPC_MM_SLICES is not set
+-CONFIG_NOT_COHERENT_CACHE=y
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-# CONFIG_DEFAULT_UIMAGE is not set
+-CONFIG_PPC_DCR_NATIVE=y
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_PPC_DCR=y
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-CONFIG_POSIX_MQUEUE=y
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_USER_NS is not set
+-# CONFIG_PID_NS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_FAIR_GROUP_SCHED=y
+-CONFIG_FAIR_USER_SCHED=y
+-# CONFIG_FAIR_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-# CONFIG_RELAY is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-CONFIG_KALLSYMS=y
+-# CONFIG_KALLSYMS_ALL is not set
+-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-CONFIG_EPOLL=y
+-CONFIG_SIGNALFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLUB_DEBUG=y
+-# CONFIG_SLAB is not set
+-CONFIG_SLUB=y
+-# CONFIG_SLOB is not set
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-CONFIG_MODULES=y
+-CONFIG_MODULE_UNLOAD=y
+-# CONFIG_MODULE_FORCE_UNLOAD is not set
+-# CONFIG_MODVERSIONS is not set
+-# CONFIG_MODULE_SRCVERSION_ALL is not set
+-CONFIG_KMOD=y
+-CONFIG_BLOCK=y
+-CONFIG_LBD=y
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_PPC4xx_PCI_EXPRESS=y
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MPC52xx is not set
+-# CONFIG_PPC_MPC5200 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-# CONFIG_BAMBOO is not set
+-# CONFIG_EBONY is not set
+-# CONFIG_SEQUOIA is not set
+-# CONFIG_TAISHAN is not set
+-CONFIG_KATMAI=y
+-# CONFIG_RAINIER is not set
+-CONFIG_440SPe=y
+-# CONFIG_MPIC is not set
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-# CONFIG_CPM2 is not set
+-# CONFIG_FSL_ULI1575 is not set
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-# CONFIG_TICK_ONESHOT is not set
+-# CONFIG_NO_HZ is not set
+-# CONFIG_HIGH_RES_TIMERS is not set
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_BINFMT_ELF=y
+-# CONFIG_BINFMT_MISC is not set
+-# CONFIG_MATH_EMULATION is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-CONFIG_RESOURCES_64BIT=y
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-CONFIG_PROC_DEVICETREE=y
+-CONFIG_CMDLINE_BOOL=y
+-CONFIG_CMDLINE=""
+-CONFIG_SECCOMP=y
+-CONFIG_WANT_DEVICE_TREE=y
+-CONFIG_DEVICE_TREE="katmai.dts"
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_PCI=y
+-CONFIG_PCI_DOMAINS=y
+-CONFIG_PCI_SYSCALL=y
+-# CONFIG_PCIEPORTBUS is not set
+-CONFIG_ARCH_SUPPORTS_MSI=y
+-# CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
+-# CONFIG_PCI_DEBUG is not set
+-# CONFIG_PCCARD is not set
+-# CONFIG_HOTPLUG_PCI is not set
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_CONSISTENT_START=0xff100000
+-CONFIG_CONSISTENT_SIZE=0x00200000
+-CONFIG_BOOT_LOAD=0x01000000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-# CONFIG_IP_MULTICAST is not set
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_ARPD is not set
+-# CONFIG_SYN_COOKIES is not set
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_BEET is not set
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-CONFIG_FW_LOADER=y
+-# CONFIG_DEBUG_DRIVER is not set
+-# CONFIG_DEBUG_DEVRES is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-CONFIG_CONNECTOR=y
+-CONFIG_PROC_EVENTS=y
+-# CONFIG_MTD is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_CPQ_DA is not set
+-# CONFIG_BLK_CPQ_CISS_DA is not set
+-# CONFIG_BLK_DEV_DAC960 is not set
+-# CONFIG_BLK_DEV_UMEM is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-# CONFIG_BLK_DEV_LOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-# CONFIG_BLK_DEV_SX8 is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=35000
+-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-# CONFIG_XILINX_SYSACE is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_PHANTOM is not set
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_SGI_IOC4 is not set
+-# CONFIG_TIFM_CORE is not set
+-# CONFIG_IDE is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-# CONFIG_SCSI is not set
+-# CONFIG_SCSI_DMA is not set
+-# CONFIG_SCSI_NETLINK is not set
+-# CONFIG_ATA is not set
+-# CONFIG_MD is not set
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-# CONFIG_FIREWIRE is not set
+-# CONFIG_IEEE1394 is not set
+-# CONFIG_I2O is not set
+-CONFIG_MACINTOSH_DRIVERS=y
+-# CONFIG_MAC_EMUMOUSEBTN is not set
+-# CONFIG_WINDFARM is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_IP1000 is not set
+-# CONFIG_ARCNET is not set
+-# CONFIG_PHYLIB is not set
+-CONFIG_NET_ETHERNET=y
+-# CONFIG_MII is not set
+-# CONFIG_HAPPYMEAL is not set
+-# CONFIG_SUNGEM is not set
+-# CONFIG_CASSINI is not set
+-# CONFIG_NET_VENDOR_3COM is not set
+-# CONFIG_NET_TULIP is not set
+-# CONFIG_HP100 is not set
+-CONFIG_IBM_NEW_EMAC=y
+-CONFIG_IBM_NEW_EMAC_RXB=128
+-CONFIG_IBM_NEW_EMAC_TXB=64
+-CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+-CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+-CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+-# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+-# CONFIG_IBM_NEW_EMAC_ZMII is not set
+-# CONFIG_IBM_NEW_EMAC_RGMII is not set
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-CONFIG_IBM_NEW_EMAC_EMAC4=y
+-# CONFIG_NET_PCI is not set
+-# CONFIG_B44 is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_ACENIC is not set
+-# CONFIG_DL2K is not set
+-# CONFIG_E1000 is not set
+-# CONFIG_E1000E is not set
+-# CONFIG_NS83820 is not set
+-# CONFIG_HAMACHI is not set
+-# CONFIG_YELLOWFIN is not set
+-# CONFIG_R8169 is not set
+-# CONFIG_SIS190 is not set
+-# CONFIG_SKGE is not set
+-# CONFIG_SKY2 is not set
+-# CONFIG_SK98LIN is not set
+-# CONFIG_VIA_VELOCITY is not set
+-# CONFIG_TIGON3 is not set
+-# CONFIG_BNX2 is not set
+-# CONFIG_QLA3XXX is not set
+-# CONFIG_ATL1 is not set
+-CONFIG_NETDEV_10000=y
+-# CONFIG_CHELSIO_T1 is not set
+-# CONFIG_CHELSIO_T3 is not set
+-# CONFIG_IXGBE is not set
+-# CONFIG_IXGB is not set
+-# CONFIG_S2IO is not set
+-# CONFIG_MYRI10GE is not set
+-# CONFIG_NETXEN_NIC is not set
+-# CONFIG_NIU is not set
+-# CONFIG_MLX4_CORE is not set
+-# CONFIG_TEHUTI is not set
+-# CONFIG_TR is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-# CONFIG_WAN is not set
+-# CONFIG_FDDI is not set
+-# CONFIG_HIPPI is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_SHAPER is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-# CONFIG_INPUT is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-# CONFIG_SERIAL_8250_PCI is not set
+-CONFIG_SERIAL_8250_NR_UARTS=4
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-CONFIG_SERIAL_8250_EXTENDED=y
+-# CONFIG_SERIAL_8250_MANY_PORTS is not set
+-CONFIG_SERIAL_8250_SHARE_IRQ=y
+-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+-# CONFIG_SERIAL_8250_RSA is not set
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_JSM is not set
+-CONFIG_SERIAL_OF_PLATFORM=y
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-# CONFIG_HW_RANDOM is not set
+-# CONFIG_NVRAM is not set
+-# CONFIG_GEN_RTC is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_APPLICOM is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_DEVPORT=y
+-# CONFIG_I2C is not set
+-
+-#
+-# SPI support
+-#
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-# CONFIG_HWMON is not set
+-# CONFIG_WATCHDOG is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-CONFIG_DAB=y
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_AGP is not set
+-# CONFIG_DRM is not set
+-# CONFIG_VGASTATE is not set
+-CONFIG_VIDEO_OUTPUT_CONTROL=m
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-CONFIG_USB_SUPPORT=y
+-CONFIG_USB_ARCH_HAS_HCD=y
+-CONFIG_USB_ARCH_HAS_OHCI=y
+-CONFIG_USB_ARCH_HAS_EHCI=y
+-# CONFIG_USB is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-
+-#
+-# USB Gadget Support
+-#
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_INFINIBAND is not set
+-# CONFIG_EDAC is not set
+-# CONFIG_RTC_CLASS is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-# CONFIG_EXT3_FS is not set
+-# CONFIG_EXT4DEV_FS is not set
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-CONFIG_DNOTIFY=y
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-# CONFIG_MSDOS_FS is not set
+-# CONFIG_VFAT_FS is not set
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-CONFIG_CRAMFS=y
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-CONFIG_NFS_V3=y
+-# CONFIG_NFS_V3_ACL is not set
+-# CONFIG_NFS_V4 is not set
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_LOCKD_V4=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-# CONFIG_RPCSEC_GSS_KRB5 is not set
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-# CONFIG_PARTITION_ADVANCED is not set
+-CONFIG_MSDOS_PARTITION=y
+-# CONFIG_NLS is not set
+-# CONFIG_DLM is not set
+-# CONFIG_UCC_SLOW is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_ZLIB_INFLATE=y
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-CONFIG_INSTRUMENTATION=y
+-# CONFIG_PROFILING is not set
+-# CONFIG_KPROBES is not set
+-# CONFIG_MARKERS is not set
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-CONFIG_MAGIC_SYSRQ=y
+-# CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
+-# CONFIG_HEADERS_CHECK is not set
+-CONFIG_DEBUG_KERNEL=y
+-# CONFIG_DEBUG_SHIRQ is not set
+-CONFIG_DETECT_SOFTLOCKUP=y
+-CONFIG_SCHED_DEBUG=y
+-# CONFIG_SCHEDSTATS is not set
+-# CONFIG_TIMER_STATS is not set
+-# CONFIG_SLUB_DEBUG_ON is not set
+-# CONFIG_DEBUG_RT_MUTEXES is not set
+-# CONFIG_RT_MUTEX_TESTER is not set
+-# CONFIG_DEBUG_SPINLOCK is not set
+-# CONFIG_DEBUG_MUTEXES is not set
+-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+-# CONFIG_DEBUG_KOBJECT is not set
+-# CONFIG_DEBUG_BUGVERBOSE is not set
+-# CONFIG_DEBUG_INFO is not set
+-# CONFIG_DEBUG_VM is not set
+-# CONFIG_DEBUG_LIST is not set
+-# CONFIG_DEBUG_SG is not set
+-CONFIG_FORCED_INLINING=y
+-# CONFIG_BOOT_PRINTK_DELAY is not set
+-# CONFIG_RCU_TORTURE_TEST is not set
+-# CONFIG_FAULT_INJECTION is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_DEBUG_STACKOVERFLOW is not set
+-# CONFIG_DEBUG_STACK_USAGE is not set
+-# CONFIG_DEBUG_PAGEALLOC is not set
+-CONFIG_DEBUGGER=y
+-# CONFIG_KGDB is not set
+-# CONFIG_XMON is not set
+-# CONFIG_BDI_SWITCH is not set
+-# CONFIG_PPC_EARLY_DEBUG is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_BLKCIPHER=y
+-CONFIG_CRYPTO_MANAGER=y
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-CONFIG_CRYPTO_MD5=y
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-CONFIG_CRYPTO_ECB=y
+-CONFIG_CRYPTO_CBC=y
+-CONFIG_CRYPTO_PCBC=y
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-CONFIG_CRYPTO_DES=y
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_TEST is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_PPC_CLOCK is not set
+--- a/arch/powerpc/configs/kilauea_defconfig
++++ /dev/null
+@@ -1,839 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc2
+-# Fri Feb 15 21:51:43 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-# CONFIG_6xx is not set
+-# CONFIG_PPC_85xx is not set
+-# CONFIG_PPC_8xx is not set
+-CONFIG_40x=y
+-# CONFIG_44x is not set
+-# CONFIG_E200 is not set
+-CONFIG_4xx=y
+-# CONFIG_PPC_MM_SLICES is not set
+-CONFIG_NOT_COHERENT_CACHE=y
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-# CONFIG_DEFAULT_UIMAGE is not set
+-CONFIG_PPC_DCR_NATIVE=y
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_PPC_DCR=y
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-CONFIG_POSIX_MQUEUE=y
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-# CONFIG_FAIR_GROUP_SCHED is not set
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-CONFIG_KALLSYMS=y
+-CONFIG_KALLSYMS_ALL=y
+-CONFIG_KALLSYMS_EXTRA_PASS=y
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-CONFIG_EPOLL=y
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLUB_DEBUG=y
+-# CONFIG_SLAB is not set
+-CONFIG_SLUB=y
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-# CONFIG_KPROBES is not set
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-CONFIG_MODULES=y
+-CONFIG_MODULE_UNLOAD=y
+-# CONFIG_MODULE_FORCE_UNLOAD is not set
+-# CONFIG_MODVERSIONS is not set
+-# CONFIG_MODULE_SRCVERSION_ALL is not set
+-CONFIG_KMOD=y
+-CONFIG_BLOCK=y
+-CONFIG_LBD=y
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-# CONFIG_PREEMPT_RCU is not set
+-CONFIG_PPC4xx_PCI_EXPRESS=y
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-# CONFIG_EP405 is not set
+-CONFIG_KILAUEA=y
+-# CONFIG_MAKALU is not set
+-# CONFIG_WALNUT is not set
+-# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
+-CONFIG_405EX=y
+-# CONFIG_IPIC is not set
+-# CONFIG_MPIC is not set
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-# CONFIG_FSL_ULI1575 is not set
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-# CONFIG_TICK_ONESHOT is not set
+-# CONFIG_NO_HZ is not set
+-# CONFIG_HIGH_RES_TIMERS is not set
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_RCU_TRACE=y
+-CONFIG_BINFMT_ELF=y
+-# CONFIG_BINFMT_MISC is not set
+-# CONFIG_MATH_EMULATION is not set
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_RESOURCES_64BIT is not set
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-CONFIG_PROC_DEVICETREE=y
+-# CONFIG_CMDLINE_BOOL is not set
+-# CONFIG_PM is not set
+-CONFIG_SECCOMP=y
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_PCI=y
+-CONFIG_PCI_DOMAINS=y
+-CONFIG_PCI_SYSCALL=y
+-# CONFIG_PCIEPORTBUS is not set
+-CONFIG_ARCH_SUPPORTS_MSI=y
+-# CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
+-# CONFIG_PCI_DEBUG is not set
+-# CONFIG_PCCARD is not set
+-# CONFIG_HOTPLUG_PCI is not set
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_CONSISTENT_START=0xff100000
+-CONFIG_CONSISTENT_SIZE=0x00200000
+-CONFIG_BOOT_LOAD=0x00400000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-# CONFIG_IP_MULTICAST is not set
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_ARPD is not set
+-# CONFIG_SYN_COOKIES is not set
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_BEET is not set
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-CONFIG_FW_LOADER=y
+-# CONFIG_DEBUG_DRIVER is not set
+-# CONFIG_DEBUG_DEVRES is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-CONFIG_CONNECTOR=y
+-CONFIG_PROC_EVENTS=y
+-CONFIG_MTD=y
+-# CONFIG_MTD_DEBUG is not set
+-# CONFIG_MTD_CONCAT is not set
+-CONFIG_MTD_PARTITIONS=y
+-# CONFIG_MTD_REDBOOT_PARTS is not set
+-CONFIG_MTD_CMDLINE_PARTS=y
+-CONFIG_MTD_OF_PARTS=y
+-
+-#
+-# User Modules And Translation Layers
+-#
+-CONFIG_MTD_CHAR=y
+-CONFIG_MTD_BLKDEVS=m
+-CONFIG_MTD_BLOCK=m
+-# CONFIG_MTD_BLOCK_RO is not set
+-# CONFIG_FTL is not set
+-# CONFIG_NFTL is not set
+-# CONFIG_INFTL is not set
+-# CONFIG_RFD_FTL is not set
+-# CONFIG_SSFDC is not set
+-# CONFIG_MTD_OOPS is not set
+-
+-#
+-# RAM/ROM/Flash chip drivers
+-#
+-CONFIG_MTD_CFI=y
+-CONFIG_MTD_JEDECPROBE=y
+-CONFIG_MTD_GEN_PROBE=y
+-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+-CONFIG_MTD_MAP_BANK_WIDTH_1=y
+-CONFIG_MTD_MAP_BANK_WIDTH_2=y
+-CONFIG_MTD_MAP_BANK_WIDTH_4=y
+-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+-CONFIG_MTD_CFI_I1=y
+-CONFIG_MTD_CFI_I2=y
+-# CONFIG_MTD_CFI_I4 is not set
+-# CONFIG_MTD_CFI_I8 is not set
+-# CONFIG_MTD_CFI_INTELEXT is not set
+-CONFIG_MTD_CFI_AMDSTD=y
+-# CONFIG_MTD_CFI_STAA is not set
+-CONFIG_MTD_CFI_UTIL=y
+-# CONFIG_MTD_RAM is not set
+-# CONFIG_MTD_ROM is not set
+-# CONFIG_MTD_ABSENT is not set
+-
+-#
+-# Mapping drivers for chip access
+-#
+-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+-# CONFIG_MTD_PHYSMAP is not set
+-CONFIG_MTD_PHYSMAP_OF=y
+-# CONFIG_MTD_INTEL_VR_NOR is not set
+-# CONFIG_MTD_PLATRAM is not set
+-
+-#
+-# Self-contained MTD device drivers
+-#
+-# CONFIG_MTD_PMC551 is not set
+-# CONFIG_MTD_SLRAM is not set
+-# CONFIG_MTD_PHRAM is not set
+-# CONFIG_MTD_MTDRAM is not set
+-# CONFIG_MTD_BLOCK2MTD is not set
+-
+-#
+-# Disk-On-Chip Device Drivers
+-#
+-# CONFIG_MTD_DOC2000 is not set
+-# CONFIG_MTD_DOC2001 is not set
+-# CONFIG_MTD_DOC2001PLUS is not set
+-# CONFIG_MTD_NAND is not set
+-# CONFIG_MTD_ONENAND is not set
+-
+-#
+-# UBI - Unsorted block images
+-#
+-# CONFIG_MTD_UBI is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_CPQ_DA is not set
+-# CONFIG_BLK_CPQ_CISS_DA is not set
+-# CONFIG_BLK_DEV_DAC960 is not set
+-# CONFIG_BLK_DEV_UMEM is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-# CONFIG_BLK_DEV_LOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-# CONFIG_BLK_DEV_SX8 is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=35000
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-# CONFIG_XILINX_SYSACE is not set
+-# CONFIG_MISC_DEVICES is not set
+-CONFIG_HAVE_IDE=y
+-# CONFIG_IDE is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-# CONFIG_SCSI is not set
+-# CONFIG_SCSI_DMA is not set
+-# CONFIG_SCSI_NETLINK is not set
+-# CONFIG_ATA is not set
+-# CONFIG_MD is not set
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-# CONFIG_FIREWIRE is not set
+-# CONFIG_IEEE1394 is not set
+-# CONFIG_I2O is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_ARCNET is not set
+-# CONFIG_PHYLIB is not set
+-CONFIG_NET_ETHERNET=y
+-# CONFIG_MII is not set
+-# CONFIG_HAPPYMEAL is not set
+-# CONFIG_SUNGEM is not set
+-# CONFIG_CASSINI is not set
+-# CONFIG_NET_VENDOR_3COM is not set
+-# CONFIG_NET_TULIP is not set
+-# CONFIG_HP100 is not set
+-CONFIG_IBM_NEW_EMAC=y
+-CONFIG_IBM_NEW_EMAC_RXB=256
+-CONFIG_IBM_NEW_EMAC_TXB=256
+-CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+-CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+-CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+-# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+-# CONFIG_IBM_NEW_EMAC_ZMII is not set
+-CONFIG_IBM_NEW_EMAC_RGMII=y
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-CONFIG_IBM_NEW_EMAC_EMAC4=y
+-# CONFIG_NET_PCI is not set
+-# CONFIG_B44 is not set
+-# CONFIG_NETDEV_1000 is not set
+-# CONFIG_NETDEV_10000 is not set
+-# CONFIG_TR is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-# CONFIG_WAN is not set
+-# CONFIG_FDDI is not set
+-# CONFIG_HIPPI is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-# CONFIG_INPUT is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-# CONFIG_NOZOMI is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-CONFIG_SERIAL_8250_PCI=y
+-CONFIG_SERIAL_8250_NR_UARTS=4
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-CONFIG_SERIAL_8250_EXTENDED=y
+-# CONFIG_SERIAL_8250_MANY_PORTS is not set
+-CONFIG_SERIAL_8250_SHARE_IRQ=y
+-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+-# CONFIG_SERIAL_8250_RSA is not set
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_JSM is not set
+-CONFIG_SERIAL_OF_PLATFORM=y
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-# CONFIG_HW_RANDOM is not set
+-# CONFIG_NVRAM is not set
+-# CONFIG_GEN_RTC is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_APPLICOM is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_DEVPORT=y
+-# CONFIG_I2C is not set
+-
+-#
+-# SPI support
+-#
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-# CONFIG_HWMON is not set
+-CONFIG_THERMAL=y
+-# CONFIG_WATCHDOG is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-# CONFIG_DAB is not set
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_AGP is not set
+-# CONFIG_DRM is not set
+-# CONFIG_VGASTATE is not set
+-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-# CONFIG_USB_SUPPORT is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_INFINIBAND is not set
+-# CONFIG_EDAC is not set
+-# CONFIG_RTC_CLASS is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-# CONFIG_EXT3_FS is not set
+-# CONFIG_EXT4DEV_FS is not set
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-# CONFIG_MSDOS_FS is not set
+-# CONFIG_VFAT_FS is not set
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-# CONFIG_JFFS2_FS is not set
+-CONFIG_CRAMFS=y
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-CONFIG_NFS_V3=y
+-# CONFIG_NFS_V3_ACL is not set
+-# CONFIG_NFS_V4 is not set
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_LOCKD_V4=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-# CONFIG_RPCSEC_GSS_KRB5 is not set
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-# CONFIG_PARTITION_ADVANCED is not set
+-CONFIG_MSDOS_PARTITION=y
+-# CONFIG_NLS is not set
+-# CONFIG_DLM is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_ZLIB_INFLATE=y
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-CONFIG_MAGIC_SYSRQ=y
+-# CONFIG_UNUSED_SYMBOLS is not set
+-CONFIG_DEBUG_FS=y
+-# CONFIG_HEADERS_CHECK is not set
+-CONFIG_DEBUG_KERNEL=y
+-# CONFIG_DEBUG_SHIRQ is not set
+-CONFIG_DETECT_SOFTLOCKUP=y
+-CONFIG_SCHED_DEBUG=y
+-# CONFIG_SCHEDSTATS is not set
+-# CONFIG_TIMER_STATS is not set
+-# CONFIG_SLUB_DEBUG_ON is not set
+-# CONFIG_SLUB_STATS is not set
+-# CONFIG_DEBUG_RT_MUTEXES is not set
+-# CONFIG_RT_MUTEX_TESTER is not set
+-# CONFIG_DEBUG_SPINLOCK is not set
+-# CONFIG_DEBUG_MUTEXES is not set
+-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+-# CONFIG_DEBUG_KOBJECT is not set
+-CONFIG_DEBUG_BUGVERBOSE=y
+-# CONFIG_DEBUG_INFO is not set
+-# CONFIG_DEBUG_VM is not set
+-# CONFIG_DEBUG_LIST is not set
+-# CONFIG_DEBUG_SG is not set
+-# CONFIG_BOOT_PRINTK_DELAY is not set
+-# CONFIG_RCU_TORTURE_TEST is not set
+-# CONFIG_BACKTRACE_SELF_TEST is not set
+-# CONFIG_FAULT_INJECTION is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_DEBUG_STACKOVERFLOW is not set
+-# CONFIG_DEBUG_STACK_USAGE is not set
+-# CONFIG_DEBUG_PAGEALLOC is not set
+-# CONFIG_DEBUGGER is not set
+-# CONFIG_VIRQ_DEBUG is not set
+-# CONFIG_BDI_SWITCH is not set
+-# CONFIG_PPC_EARLY_DEBUG is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_BLKCIPHER=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-CONFIG_CRYPTO_MANAGER=y
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-CONFIG_CRYPTO_MD5=y
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-CONFIG_CRYPTO_ECB=y
+-CONFIG_CRYPTO_CBC=y
+-CONFIG_CRYPTO_PCBC=y
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-CONFIG_CRYPTO_DES=y
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_TEST is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+-# CONFIG_PPC_CLOCK is not set
+--- a/arch/powerpc/configs/makalu_defconfig
++++ /dev/null
+@@ -1,839 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc2
+-# Fri Feb 15 21:52:30 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-# CONFIG_6xx is not set
+-# CONFIG_PPC_85xx is not set
+-# CONFIG_PPC_8xx is not set
+-CONFIG_40x=y
+-# CONFIG_44x is not set
+-# CONFIG_E200 is not set
+-CONFIG_4xx=y
+-# CONFIG_PPC_MM_SLICES is not set
+-CONFIG_NOT_COHERENT_CACHE=y
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-# CONFIG_DEFAULT_UIMAGE is not set
+-CONFIG_PPC_DCR_NATIVE=y
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_PPC_DCR=y
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-CONFIG_POSIX_MQUEUE=y
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-# CONFIG_FAIR_GROUP_SCHED is not set
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-CONFIG_KALLSYMS=y
+-CONFIG_KALLSYMS_ALL=y
+-CONFIG_KALLSYMS_EXTRA_PASS=y
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-CONFIG_EPOLL=y
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLUB_DEBUG=y
+-# CONFIG_SLAB is not set
+-CONFIG_SLUB=y
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-# CONFIG_KPROBES is not set
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-CONFIG_MODULES=y
+-CONFIG_MODULE_UNLOAD=y
+-# CONFIG_MODULE_FORCE_UNLOAD is not set
+-# CONFIG_MODVERSIONS is not set
+-# CONFIG_MODULE_SRCVERSION_ALL is not set
+-CONFIG_KMOD=y
+-CONFIG_BLOCK=y
+-CONFIG_LBD=y
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-# CONFIG_PREEMPT_RCU is not set
+-CONFIG_PPC4xx_PCI_EXPRESS=y
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-# CONFIG_EP405 is not set
+-# CONFIG_KILAUEA is not set
+-CONFIG_MAKALU=y
+-# CONFIG_WALNUT is not set
+-# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
+-CONFIG_405EX=y
+-# CONFIG_IPIC is not set
+-# CONFIG_MPIC is not set
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-# CONFIG_FSL_ULI1575 is not set
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-# CONFIG_TICK_ONESHOT is not set
+-# CONFIG_NO_HZ is not set
+-# CONFIG_HIGH_RES_TIMERS is not set
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_RCU_TRACE=y
+-CONFIG_BINFMT_ELF=y
+-# CONFIG_BINFMT_MISC is not set
+-# CONFIG_MATH_EMULATION is not set
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_RESOURCES_64BIT is not set
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-CONFIG_PROC_DEVICETREE=y
+-# CONFIG_CMDLINE_BOOL is not set
+-# CONFIG_PM is not set
+-CONFIG_SECCOMP=y
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_PCI=y
+-CONFIG_PCI_DOMAINS=y
+-CONFIG_PCI_SYSCALL=y
+-# CONFIG_PCIEPORTBUS is not set
+-CONFIG_ARCH_SUPPORTS_MSI=y
+-# CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
+-# CONFIG_PCI_DEBUG is not set
+-# CONFIG_PCCARD is not set
+-# CONFIG_HOTPLUG_PCI is not set
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_CONSISTENT_START=0xff100000
+-CONFIG_CONSISTENT_SIZE=0x00200000
+-CONFIG_BOOT_LOAD=0x00400000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-# CONFIG_IP_MULTICAST is not set
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_ARPD is not set
+-# CONFIG_SYN_COOKIES is not set
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_BEET is not set
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-CONFIG_FW_LOADER=y
+-# CONFIG_DEBUG_DRIVER is not set
+-# CONFIG_DEBUG_DEVRES is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-CONFIG_CONNECTOR=y
+-CONFIG_PROC_EVENTS=y
+-CONFIG_MTD=y
+-# CONFIG_MTD_DEBUG is not set
+-# CONFIG_MTD_CONCAT is not set
+-CONFIG_MTD_PARTITIONS=y
+-# CONFIG_MTD_REDBOOT_PARTS is not set
+-CONFIG_MTD_CMDLINE_PARTS=y
+-CONFIG_MTD_OF_PARTS=y
+-
+-#
+-# User Modules And Translation Layers
+-#
+-CONFIG_MTD_CHAR=y
+-CONFIG_MTD_BLKDEVS=m
+-CONFIG_MTD_BLOCK=m
+-# CONFIG_MTD_BLOCK_RO is not set
+-# CONFIG_FTL is not set
+-# CONFIG_NFTL is not set
+-# CONFIG_INFTL is not set
+-# CONFIG_RFD_FTL is not set
+-# CONFIG_SSFDC is not set
+-# CONFIG_MTD_OOPS is not set
+-
+-#
+-# RAM/ROM/Flash chip drivers
+-#
+-CONFIG_MTD_CFI=y
+-CONFIG_MTD_JEDECPROBE=y
+-CONFIG_MTD_GEN_PROBE=y
+-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+-CONFIG_MTD_MAP_BANK_WIDTH_1=y
+-CONFIG_MTD_MAP_BANK_WIDTH_2=y
+-CONFIG_MTD_MAP_BANK_WIDTH_4=y
+-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+-CONFIG_MTD_CFI_I1=y
+-CONFIG_MTD_CFI_I2=y
+-# CONFIG_MTD_CFI_I4 is not set
+-# CONFIG_MTD_CFI_I8 is not set
+-# CONFIG_MTD_CFI_INTELEXT is not set
+-CONFIG_MTD_CFI_AMDSTD=y
+-# CONFIG_MTD_CFI_STAA is not set
+-CONFIG_MTD_CFI_UTIL=y
+-# CONFIG_MTD_RAM is not set
+-# CONFIG_MTD_ROM is not set
+-# CONFIG_MTD_ABSENT is not set
+-
+-#
+-# Mapping drivers for chip access
+-#
+-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+-# CONFIG_MTD_PHYSMAP is not set
+-CONFIG_MTD_PHYSMAP_OF=y
+-# CONFIG_MTD_INTEL_VR_NOR is not set
+-# CONFIG_MTD_PLATRAM is not set
+-
+-#
+-# Self-contained MTD device drivers
+-#
+-# CONFIG_MTD_PMC551 is not set
+-# CONFIG_MTD_SLRAM is not set
+-# CONFIG_MTD_PHRAM is not set
+-# CONFIG_MTD_MTDRAM is not set
+-# CONFIG_MTD_BLOCK2MTD is not set
+-
+-#
+-# Disk-On-Chip Device Drivers
+-#
+-# CONFIG_MTD_DOC2000 is not set
+-# CONFIG_MTD_DOC2001 is not set
+-# CONFIG_MTD_DOC2001PLUS is not set
+-# CONFIG_MTD_NAND is not set
+-# CONFIG_MTD_ONENAND is not set
+-
+-#
+-# UBI - Unsorted block images
+-#
+-# CONFIG_MTD_UBI is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_CPQ_DA is not set
+-# CONFIG_BLK_CPQ_CISS_DA is not set
+-# CONFIG_BLK_DEV_DAC960 is not set
+-# CONFIG_BLK_DEV_UMEM is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-# CONFIG_BLK_DEV_LOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-# CONFIG_BLK_DEV_SX8 is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=35000
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-# CONFIG_XILINX_SYSACE is not set
+-# CONFIG_MISC_DEVICES is not set
+-CONFIG_HAVE_IDE=y
+-# CONFIG_IDE is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-# CONFIG_SCSI is not set
+-# CONFIG_SCSI_DMA is not set
+-# CONFIG_SCSI_NETLINK is not set
+-# CONFIG_ATA is not set
+-# CONFIG_MD is not set
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-# CONFIG_FIREWIRE is not set
+-# CONFIG_IEEE1394 is not set
+-# CONFIG_I2O is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_ARCNET is not set
+-# CONFIG_PHYLIB is not set
+-CONFIG_NET_ETHERNET=y
+-# CONFIG_MII is not set
+-# CONFIG_HAPPYMEAL is not set
+-# CONFIG_SUNGEM is not set
+-# CONFIG_CASSINI is not set
+-# CONFIG_NET_VENDOR_3COM is not set
+-# CONFIG_NET_TULIP is not set
+-# CONFIG_HP100 is not set
+-CONFIG_IBM_NEW_EMAC=y
+-CONFIG_IBM_NEW_EMAC_RXB=256
+-CONFIG_IBM_NEW_EMAC_TXB=256
+-CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+-CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+-CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+-# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+-# CONFIG_IBM_NEW_EMAC_ZMII is not set
+-CONFIG_IBM_NEW_EMAC_RGMII=y
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-CONFIG_IBM_NEW_EMAC_EMAC4=y
+-# CONFIG_NET_PCI is not set
+-# CONFIG_B44 is not set
+-# CONFIG_NETDEV_1000 is not set
+-# CONFIG_NETDEV_10000 is not set
+-# CONFIG_TR is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-# CONFIG_WAN is not set
+-# CONFIG_FDDI is not set
+-# CONFIG_HIPPI is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-# CONFIG_INPUT is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-# CONFIG_NOZOMI is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-CONFIG_SERIAL_8250_PCI=y
+-CONFIG_SERIAL_8250_NR_UARTS=4
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-CONFIG_SERIAL_8250_EXTENDED=y
+-# CONFIG_SERIAL_8250_MANY_PORTS is not set
+-CONFIG_SERIAL_8250_SHARE_IRQ=y
+-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+-# CONFIG_SERIAL_8250_RSA is not set
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_JSM is not set
+-CONFIG_SERIAL_OF_PLATFORM=y
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-# CONFIG_HW_RANDOM is not set
+-# CONFIG_NVRAM is not set
+-# CONFIG_GEN_RTC is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_APPLICOM is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_DEVPORT=y
+-# CONFIG_I2C is not set
+-
+-#
+-# SPI support
+-#
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-# CONFIG_HWMON is not set
+-CONFIG_THERMAL=y
+-# CONFIG_WATCHDOG is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-# CONFIG_DAB is not set
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_AGP is not set
+-# CONFIG_DRM is not set
+-# CONFIG_VGASTATE is not set
+-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-# CONFIG_USB_SUPPORT is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_INFINIBAND is not set
+-# CONFIG_EDAC is not set
+-# CONFIG_RTC_CLASS is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-# CONFIG_EXT3_FS is not set
+-# CONFIG_EXT4DEV_FS is not set
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-# CONFIG_MSDOS_FS is not set
+-# CONFIG_VFAT_FS is not set
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-# CONFIG_JFFS2_FS is not set
+-CONFIG_CRAMFS=y
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-CONFIG_NFS_V3=y
+-# CONFIG_NFS_V3_ACL is not set
+-# CONFIG_NFS_V4 is not set
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_LOCKD_V4=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-# CONFIG_RPCSEC_GSS_KRB5 is not set
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-# CONFIG_PARTITION_ADVANCED is not set
+-CONFIG_MSDOS_PARTITION=y
+-# CONFIG_NLS is not set
+-# CONFIG_DLM is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_ZLIB_INFLATE=y
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-CONFIG_MAGIC_SYSRQ=y
+-# CONFIG_UNUSED_SYMBOLS is not set
+-CONFIG_DEBUG_FS=y
+-# CONFIG_HEADERS_CHECK is not set
+-CONFIG_DEBUG_KERNEL=y
+-# CONFIG_DEBUG_SHIRQ is not set
+-CONFIG_DETECT_SOFTLOCKUP=y
+-CONFIG_SCHED_DEBUG=y
+-# CONFIG_SCHEDSTATS is not set
+-# CONFIG_TIMER_STATS is not set
+-# CONFIG_SLUB_DEBUG_ON is not set
+-# CONFIG_SLUB_STATS is not set
+-# CONFIG_DEBUG_RT_MUTEXES is not set
+-# CONFIG_RT_MUTEX_TESTER is not set
+-# CONFIG_DEBUG_SPINLOCK is not set
+-# CONFIG_DEBUG_MUTEXES is not set
+-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+-# CONFIG_DEBUG_KOBJECT is not set
+-CONFIG_DEBUG_BUGVERBOSE=y
+-# CONFIG_DEBUG_INFO is not set
+-# CONFIG_DEBUG_VM is not set
+-# CONFIG_DEBUG_LIST is not set
+-# CONFIG_DEBUG_SG is not set
+-# CONFIG_BOOT_PRINTK_DELAY is not set
+-# CONFIG_RCU_TORTURE_TEST is not set
+-# CONFIG_BACKTRACE_SELF_TEST is not set
+-# CONFIG_FAULT_INJECTION is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_DEBUG_STACKOVERFLOW is not set
+-# CONFIG_DEBUG_STACK_USAGE is not set
+-# CONFIG_DEBUG_PAGEALLOC is not set
+-# CONFIG_DEBUGGER is not set
+-# CONFIG_VIRQ_DEBUG is not set
+-# CONFIG_BDI_SWITCH is not set
+-# CONFIG_PPC_EARLY_DEBUG is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_BLKCIPHER=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-CONFIG_CRYPTO_MANAGER=y
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-CONFIG_CRYPTO_MD5=y
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-CONFIG_CRYPTO_ECB=y
+-CONFIG_CRYPTO_CBC=y
+-CONFIG_CRYPTO_PCBC=y
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-CONFIG_CRYPTO_DES=y
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_TEST is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+-# CONFIG_PPC_CLOCK is not set
+--- a/arch/powerpc/configs/maple_defconfig
++++ b/arch/powerpc/configs/maple_defconfig
+@@ -333,7 +333,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
+ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+ CONFIG_STANDALONE=y
+ CONFIG_PREVENT_FIRMWARE_BUILD=y
+-# CONFIG_FW_LOADER is not set
++CONFIG_FW_LOADER=y
+ # CONFIG_DEBUG_DRIVER is not set
+ # CONFIG_DEBUG_DEVRES is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+@@ -374,6 +374,7 @@ CONFIG_BLK_DEV_IDEDISK=y
+ CONFIG_BLK_DEV_IDECD=y
+ # CONFIG_BLK_DEV_IDETAPE is not set
+ # CONFIG_BLK_DEV_IDEFLOPPY is not set
++# CONFIG_BLK_DEV_IDESCSI is not set
+ CONFIG_IDE_TASK_IOCTL=y
+ CONFIG_IDE_PROC_FS=y
+ 
+@@ -427,10 +428,129 @@ CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+ # SCSI device support
+ #
+ # CONFIG_RAID_ATTRS is not set
+-# CONFIG_SCSI is not set
+-# CONFIG_SCSI_DMA is not set
++CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
+ # CONFIG_SCSI_NETLINK is not set
+-# CONFIG_ATA is not set
++# CONFIG_SCSI_PROC_FS is not set
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++CONFIG_CHR_DEV_SG=y
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
++# CONFIG_SCSI_3W_9XXX is not set
++# CONFIG_SCSI_ACARD is not set
++# CONFIG_SCSI_AACRAID is not set
++# CONFIG_SCSI_AIC7XXX is not set
++# CONFIG_SCSI_AIC7XXX_OLD is not set
++# CONFIG_SCSI_AIC79XX is not set
++# CONFIG_SCSI_AIC94XX is not set
++# CONFIG_SCSI_ARCMSR is not set
++# CONFIG_MEGARAID_NEWGEN is not set
++# CONFIG_MEGARAID_LEGACY is not set
++# CONFIG_MEGARAID_SAS is not set
++# CONFIG_SCSI_HPTIOP is not set
++# CONFIG_SCSI_DMX3191D is not set
++# CONFIG_SCSI_EATA is not set
++# CONFIG_SCSI_FUTURE_DOMAIN is not set
++# CONFIG_SCSI_GDTH is not set
++# CONFIG_SCSI_IPS is not set
++# CONFIG_SCSI_INITIO is not set
++# CONFIG_SCSI_INIA100 is not set
++# CONFIG_SCSI_STEX is not set
++# CONFIG_SCSI_SYM53C8XX_2 is not set
++CONFIG_SCSI_IPR=y
++CONFIG_SCSI_IPR_TRACE=y
++CONFIG_SCSI_IPR_DUMP=y
++# CONFIG_SCSI_QLOGIC_1280 is not set
++# CONFIG_SCSI_QLA_FC is not set
++# CONFIG_SCSI_QLA_ISCSI is not set
++# CONFIG_SCSI_LPFC is not set
++# CONFIG_SCSI_DC395x is not set
++# CONFIG_SCSI_DC390T is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_SCSI_SRP is not set
++CONFIG_ATA=y
++CONFIG_ATA_NONSTANDARD=y
++# CONFIG_SATA_AHCI is not set
++# CONFIG_SATA_SVW is not set
++# CONFIG_ATA_PIIX is not set
++# CONFIG_SATA_MV is not set
++# CONFIG_SATA_NV is not set
++# CONFIG_PDC_ADMA is not set
++# CONFIG_SATA_QSTOR is not set
++# CONFIG_SATA_PROMISE is not set
++# CONFIG_SATA_SX4 is not set
++# CONFIG_SATA_SIL is not set
++# CONFIG_SATA_SIL24 is not set
++# CONFIG_SATA_SIS is not set
++# CONFIG_SATA_ULI is not set
++# CONFIG_SATA_VIA is not set
++# CONFIG_SATA_VITESSE is not set
++# CONFIG_SATA_INIC162X is not set
++# CONFIG_PATA_ALI is not set
++# CONFIG_PATA_AMD is not set
++# CONFIG_PATA_ARTOP is not set
++# CONFIG_PATA_ATIIXP is not set
++# CONFIG_PATA_CMD640_PCI is not set
++# CONFIG_PATA_CMD64X is not set
++# CONFIG_PATA_CS5520 is not set
++# CONFIG_PATA_CS5530 is not set
++# CONFIG_PATA_CYPRESS is not set
++# CONFIG_PATA_EFAR is not set
++# CONFIG_ATA_GENERIC is not set
++# CONFIG_PATA_HPT366 is not set
++# CONFIG_PATA_HPT37X is not set
++# CONFIG_PATA_HPT3X2N is not set
++# CONFIG_PATA_HPT3X3 is not set
++# CONFIG_PATA_IT821X is not set
++# CONFIG_PATA_IT8213 is not set
++# CONFIG_PATA_JMICRON is not set
++# CONFIG_PATA_TRIFLEX is not set
++# CONFIG_PATA_MARVELL is not set
++# CONFIG_PATA_MPIIX is not set
++# CONFIG_PATA_OLDPIIX is not set
++# CONFIG_PATA_NETCELL is not set
++# CONFIG_PATA_NS87410 is not set
++# CONFIG_PATA_NS87415 is not set
++# CONFIG_PATA_OPTI is not set
++# CONFIG_PATA_OPTIDMA is not set
++# CONFIG_PATA_PDC_OLD is not set
++# CONFIG_PATA_RADISYS is not set
++# CONFIG_PATA_RZ1000 is not set
++# CONFIG_PATA_SC1200 is not set
++# CONFIG_PATA_SERVERWORKS is not set
++# CONFIG_PATA_PDC2027X is not set
++# CONFIG_PATA_SIL680 is not set
++# CONFIG_PATA_SIS is not set
++# CONFIG_PATA_VIA is not set
++# CONFIG_PATA_WINBOND is not set
+ # CONFIG_MD is not set
+ # CONFIG_FUSION is not set
+ 
+@@ -536,6 +656,7 @@ CONFIG_USB_PEGASUS=y
+ # CONFIG_HIPPI is not set
+ # CONFIG_PPP is not set
+ # CONFIG_SLIP is not set
++# CONFIG_NET_FC is not set
+ # CONFIG_SHAPER is not set
+ # CONFIG_NETCONSOLE is not set
+ # CONFIG_NETPOLL is not set
+@@ -783,12 +904,14 @@ CONFIG_USB_UHCI_HCD=y
+ #
+ # may also be needed; see USB_STORAGE Help for more information
+ #
++# CONFIG_USB_STORAGE is not set
+ # CONFIG_USB_LIBUSUAL is not set
+ 
+ #
+ # USB Imaging devices
+ #
+ # CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
+ CONFIG_USB_MON=y
+ 
+ #
+--- a/arch/powerpc/configs/mpc8313_rdb_defconfig
++++ /dev/null
+@@ -1,1393 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc6
+-# Mon Mar 24 08:48:14 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-CONFIG_6xx=y
+-# CONFIG_PPC_85xx is not set
+-# CONFIG_PPC_8xx is not set
+-# CONFIG_40x is not set
+-# CONFIG_44x is not set
+-# CONFIG_E200 is not set
+-CONFIG_PPC_FPU=y
+-# CONFIG_FSL_EMB_PERFMON is not set
+-CONFIG_PPC_STD_MMU=y
+-CONFIG_PPC_STD_MMU_32=y
+-# CONFIG_PPC_MM_SLICES is not set
+-# CONFIG_SMP is not set
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-CONFIG_DEFAULT_UIMAGE=y
+-# CONFIG_PPC_DCR_NATIVE is not set
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-# CONFIG_POSIX_MQUEUE is not set
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-# CONFIG_FAIR_GROUP_SCHED is not set
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-CONFIG_SYSFS_DEPRECATED_V2=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-# CONFIG_KALLSYMS is not set
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-# CONFIG_EPOLL is not set
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLUB_DEBUG=y
+-# CONFIG_SLAB is not set
+-CONFIG_SLUB=y
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_HAVE_KRETPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-CONFIG_MODULES=y
+-CONFIG_MODULE_UNLOAD=y
+-# CONFIG_MODULE_FORCE_UNLOAD is not set
+-# CONFIG_MODVERSIONS is not set
+-# CONFIG_MODULE_SRCVERSION_ALL is not set
+-# CONFIG_KMOD is not set
+-CONFIG_BLOCK=y
+-# CONFIG_LBD is not set
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MULTIPLATFORM is not set
+-# CONFIG_PPC_82xx is not set
+-CONFIG_PPC_83xx=y
+-# CONFIG_PPC_86xx is not set
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-CONFIG_MPC83xx=y
+-CONFIG_MPC831x_RDB=y
+-# CONFIG_MPC832x_MDS is not set
+-# CONFIG_MPC832x_RDB is not set
+-# CONFIG_MPC834x_MDS is not set
+-# CONFIG_MPC834x_ITX is not set
+-# CONFIG_MPC836x_MDS is not set
+-# CONFIG_MPC837x_MDS is not set
+-# CONFIG_MPC837x_RDB is not set
+-# CONFIG_SBC834x is not set
+-CONFIG_PPC_MPC831x=y
+-CONFIG_IPIC=y
+-# CONFIG_MPIC is not set
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-# CONFIG_FSL_ULI1575 is not set
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-CONFIG_TICK_ONESHOT=y
+-CONFIG_NO_HZ=y
+-CONFIG_HIGH_RES_TIMERS=y
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_BINFMT_ELF=y
+-# CONFIG_BINFMT_MISC is not set
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_RESOURCES_64BIT is not set
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-CONFIG_PROC_DEVICETREE=y
+-# CONFIG_CMDLINE_BOOL is not set
+-# CONFIG_PM is not set
+-CONFIG_SECCOMP=y
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_GENERIC_ISA_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_FSL_SOC=y
+-CONFIG_PCI=y
+-CONFIG_PCI_DOMAINS=y
+-CONFIG_PCI_SYSCALL=y
+-# CONFIG_PCIEPORTBUS is not set
+-CONFIG_ARCH_SUPPORTS_MSI=y
+-# CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
+-# CONFIG_PCI_DEBUG is not set
+-# CONFIG_PCCARD is not set
+-# CONFIG_HOTPLUG_PCI is not set
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_BOOT_LOAD=0x00800000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-CONFIG_XFRM=y
+-# CONFIG_XFRM_USER is not set
+-# CONFIG_XFRM_SUB_POLICY is not set
+-# CONFIG_XFRM_MIGRATE is not set
+-# CONFIG_XFRM_STATISTICS is not set
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-CONFIG_IP_MULTICAST=y
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_IP_MROUTE is not set
+-# CONFIG_ARPD is not set
+-CONFIG_SYN_COOKIES=y
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-CONFIG_INET_XFRM_MODE_TRANSPORT=y
+-CONFIG_INET_XFRM_MODE_TUNNEL=y
+-CONFIG_INET_XFRM_MODE_BEET=y
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-# CONFIG_FW_LOADER is not set
+-# CONFIG_DEBUG_DRIVER is not set
+-# CONFIG_DEBUG_DEVRES is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-# CONFIG_CONNECTOR is not set
+-CONFIG_MTD=y
+-# CONFIG_MTD_DEBUG is not set
+-# CONFIG_MTD_CONCAT is not set
+-CONFIG_MTD_PARTITIONS=y
+-# CONFIG_MTD_REDBOOT_PARTS is not set
+-# CONFIG_MTD_CMDLINE_PARTS is not set
+-# CONFIG_MTD_OF_PARTS is not set
+-
+-#
+-# User Modules And Translation Layers
+-#
+-CONFIG_MTD_CHAR=y
+-CONFIG_MTD_BLKDEVS=y
+-CONFIG_MTD_BLOCK=y
+-# CONFIG_FTL is not set
+-# CONFIG_NFTL is not set
+-# CONFIG_INFTL is not set
+-# CONFIG_RFD_FTL is not set
+-# CONFIG_SSFDC is not set
+-# CONFIG_MTD_OOPS is not set
+-
+-#
+-# RAM/ROM/Flash chip drivers
+-#
+-CONFIG_MTD_CFI=y
+-# CONFIG_MTD_JEDECPROBE is not set
+-CONFIG_MTD_GEN_PROBE=y
+-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+-CONFIG_MTD_MAP_BANK_WIDTH_1=y
+-CONFIG_MTD_MAP_BANK_WIDTH_2=y
+-CONFIG_MTD_MAP_BANK_WIDTH_4=y
+-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+-CONFIG_MTD_CFI_I1=y
+-CONFIG_MTD_CFI_I2=y
+-# CONFIG_MTD_CFI_I4 is not set
+-# CONFIG_MTD_CFI_I8 is not set
+-# CONFIG_MTD_CFI_INTELEXT is not set
+-CONFIG_MTD_CFI_AMDSTD=y
+-# CONFIG_MTD_CFI_STAA is not set
+-CONFIG_MTD_CFI_UTIL=y
+-# CONFIG_MTD_RAM is not set
+-# CONFIG_MTD_ROM is not set
+-# CONFIG_MTD_ABSENT is not set
+-
+-#
+-# Mapping drivers for chip access
+-#
+-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+-# CONFIG_MTD_PHYSMAP is not set
+-CONFIG_MTD_PHYSMAP_OF=y
+-# CONFIG_MTD_INTEL_VR_NOR is not set
+-# CONFIG_MTD_PLATRAM is not set
+-
+-#
+-# Self-contained MTD device drivers
+-#
+-# CONFIG_MTD_PMC551 is not set
+-# CONFIG_MTD_DATAFLASH is not set
+-# CONFIG_MTD_M25P80 is not set
+-# CONFIG_MTD_SLRAM is not set
+-# CONFIG_MTD_PHRAM is not set
+-# CONFIG_MTD_MTDRAM is not set
+-# CONFIG_MTD_BLOCK2MTD is not set
+-
+-#
+-# Disk-On-Chip Device Drivers
+-#
+-# CONFIG_MTD_DOC2000 is not set
+-# CONFIG_MTD_DOC2001 is not set
+-# CONFIG_MTD_DOC2001PLUS is not set
+-CONFIG_MTD_NAND=y
+-CONFIG_MTD_NAND_VERIFY_WRITE=y
+-# CONFIG_MTD_NAND_ECC_SMC is not set
+-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+-CONFIG_MTD_NAND_IDS=y
+-# CONFIG_MTD_NAND_DISKONCHIP is not set
+-# CONFIG_MTD_NAND_CAFE is not set
+-# CONFIG_MTD_NAND_NANDSIM is not set
+-# CONFIG_MTD_NAND_PLATFORM is not set
+-# CONFIG_MTD_ALAUDA is not set
+-# CONFIG_MTD_NAND_FSL_ELBC is not set
+-# CONFIG_MTD_ONENAND is not set
+-
+-#
+-# UBI - Unsorted block images
+-#
+-# CONFIG_MTD_UBI is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_CPQ_DA is not set
+-# CONFIG_BLK_CPQ_CISS_DA is not set
+-# CONFIG_BLK_DEV_DAC960 is not set
+-# CONFIG_BLK_DEV_UMEM is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-CONFIG_BLK_DEV_LOOP=y
+-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-# CONFIG_BLK_DEV_SX8 is not set
+-# CONFIG_BLK_DEV_UB is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=32768
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_PHANTOM is not set
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_SGI_IOC4 is not set
+-# CONFIG_TIFM_CORE is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-# CONFIG_IDE is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-CONFIG_SCSI=y
+-CONFIG_SCSI_DMA=y
+-# CONFIG_SCSI_TGT is not set
+-# CONFIG_SCSI_NETLINK is not set
+-CONFIG_SCSI_PROC_FS=y
+-
+-#
+-# SCSI support type (disk, tape, CD-ROM)
+-#
+-# CONFIG_BLK_DEV_SD is not set
+-# CONFIG_CHR_DEV_ST is not set
+-# CONFIG_CHR_DEV_OSST is not set
+-# CONFIG_BLK_DEV_SR is not set
+-CONFIG_CHR_DEV_SG=y
+-# CONFIG_CHR_DEV_SCH is not set
+-
+-#
+-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+-#
+-# CONFIG_SCSI_MULTI_LUN is not set
+-# CONFIG_SCSI_CONSTANTS is not set
+-# CONFIG_SCSI_LOGGING is not set
+-# CONFIG_SCSI_SCAN_ASYNC is not set
+-CONFIG_SCSI_WAIT_SCAN=m
+-
+-#
+-# SCSI Transports
+-#
+-CONFIG_SCSI_SPI_ATTRS=y
+-# CONFIG_SCSI_FC_ATTRS is not set
+-# CONFIG_SCSI_ISCSI_ATTRS is not set
+-# CONFIG_SCSI_SAS_LIBSAS is not set
+-# CONFIG_SCSI_SRP_ATTRS is not set
+-CONFIG_SCSI_LOWLEVEL=y
+-# CONFIG_ISCSI_TCP is not set
+-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+-# CONFIG_SCSI_3W_9XXX is not set
+-# CONFIG_SCSI_ACARD is not set
+-# CONFIG_SCSI_AACRAID is not set
+-# CONFIG_SCSI_AIC7XXX is not set
+-# CONFIG_SCSI_AIC7XXX_OLD is not set
+-# CONFIG_SCSI_AIC79XX is not set
+-# CONFIG_SCSI_AIC94XX is not set
+-# CONFIG_SCSI_DPT_I2O is not set
+-# CONFIG_SCSI_ADVANSYS is not set
+-# CONFIG_SCSI_ARCMSR is not set
+-# CONFIG_MEGARAID_NEWGEN is not set
+-# CONFIG_MEGARAID_LEGACY is not set
+-# CONFIG_MEGARAID_SAS is not set
+-# CONFIG_SCSI_HPTIOP is not set
+-# CONFIG_SCSI_BUSLOGIC is not set
+-# CONFIG_SCSI_DMX3191D is not set
+-# CONFIG_SCSI_EATA is not set
+-# CONFIG_SCSI_FUTURE_DOMAIN is not set
+-# CONFIG_SCSI_GDTH is not set
+-# CONFIG_SCSI_IPS is not set
+-# CONFIG_SCSI_INITIO is not set
+-# CONFIG_SCSI_INIA100 is not set
+-# CONFIG_SCSI_MVSAS is not set
+-# CONFIG_SCSI_STEX is not set
+-# CONFIG_SCSI_SYM53C8XX_2 is not set
+-# CONFIG_SCSI_QLOGIC_1280 is not set
+-# CONFIG_SCSI_QLA_FC is not set
+-# CONFIG_SCSI_QLA_ISCSI is not set
+-# CONFIG_SCSI_LPFC is not set
+-# CONFIG_SCSI_DC395x is not set
+-# CONFIG_SCSI_DC390T is not set
+-# CONFIG_SCSI_NSP32 is not set
+-# CONFIG_SCSI_DEBUG is not set
+-# CONFIG_SCSI_SRP is not set
+-# CONFIG_ATA is not set
+-CONFIG_MD=y
+-CONFIG_BLK_DEV_MD=y
+-CONFIG_MD_LINEAR=y
+-CONFIG_MD_RAID0=y
+-CONFIG_MD_RAID1=y
+-# CONFIG_MD_RAID10 is not set
+-# CONFIG_MD_RAID456 is not set
+-# CONFIG_MD_MULTIPATH is not set
+-# CONFIG_MD_FAULTY is not set
+-# CONFIG_BLK_DEV_DM is not set
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-# CONFIG_FIREWIRE is not set
+-# CONFIG_IEEE1394 is not set
+-# CONFIG_I2O is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_ARCNET is not set
+-CONFIG_PHYLIB=y
+-
+-#
+-# MII PHY device drivers
+-#
+-# CONFIG_MARVELL_PHY is not set
+-# CONFIG_DAVICOM_PHY is not set
+-# CONFIG_QSEMI_PHY is not set
+-# CONFIG_LXT_PHY is not set
+-CONFIG_CICADA_PHY=y
+-# CONFIG_VITESSE_PHY is not set
+-# CONFIG_SMSC_PHY is not set
+-# CONFIG_BROADCOM_PHY is not set
+-# CONFIG_ICPLUS_PHY is not set
+-# CONFIG_REALTEK_PHY is not set
+-# CONFIG_FIXED_PHY is not set
+-# CONFIG_MDIO_BITBANG is not set
+-CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
+-# CONFIG_HAPPYMEAL is not set
+-# CONFIG_SUNGEM is not set
+-# CONFIG_CASSINI is not set
+-# CONFIG_NET_VENDOR_3COM is not set
+-# CONFIG_ENC28J60 is not set
+-# CONFIG_NET_TULIP is not set
+-# CONFIG_HP100 is not set
+-# CONFIG_IBM_NEW_EMAC_ZMII is not set
+-# CONFIG_IBM_NEW_EMAC_RGMII is not set
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-CONFIG_NET_PCI=y
+-# CONFIG_PCNET32 is not set
+-# CONFIG_AMD8111_ETH is not set
+-# CONFIG_ADAPTEC_STARFIRE is not set
+-# CONFIG_B44 is not set
+-# CONFIG_FORCEDETH is not set
+-# CONFIG_EEPRO100 is not set
+-CONFIG_E100=y
+-# CONFIG_FEALNX is not set
+-# CONFIG_NATSEMI is not set
+-# CONFIG_NE2K_PCI is not set
+-# CONFIG_8139CP is not set
+-# CONFIG_8139TOO is not set
+-# CONFIG_R6040 is not set
+-# CONFIG_SIS900 is not set
+-# CONFIG_EPIC100 is not set
+-# CONFIG_SUNDANCE is not set
+-# CONFIG_TLAN is not set
+-# CONFIG_VIA_RHINE is not set
+-# CONFIG_SC92031 is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_ACENIC is not set
+-# CONFIG_DL2K is not set
+-# CONFIG_E1000 is not set
+-# CONFIG_E1000E is not set
+-# CONFIG_E1000E_ENABLED is not set
+-# CONFIG_IP1000 is not set
+-# CONFIG_IGB is not set
+-# CONFIG_NS83820 is not set
+-# CONFIG_HAMACHI is not set
+-# CONFIG_YELLOWFIN is not set
+-# CONFIG_R8169 is not set
+-# CONFIG_SIS190 is not set
+-# CONFIG_SKGE is not set
+-# CONFIG_SKY2 is not set
+-# CONFIG_SK98LIN is not set
+-# CONFIG_VIA_VELOCITY is not set
+-# CONFIG_TIGON3 is not set
+-# CONFIG_BNX2 is not set
+-CONFIG_GIANFAR=y
+-CONFIG_GFAR_NAPI=y
+-# CONFIG_QLA3XXX is not set
+-# CONFIG_ATL1 is not set
+-CONFIG_NETDEV_10000=y
+-# CONFIG_CHELSIO_T1 is not set
+-# CONFIG_CHELSIO_T3 is not set
+-# CONFIG_IXGBE is not set
+-# CONFIG_IXGB is not set
+-# CONFIG_S2IO is not set
+-# CONFIG_MYRI10GE is not set
+-# CONFIG_NETXEN_NIC is not set
+-# CONFIG_NIU is not set
+-# CONFIG_MLX4_CORE is not set
+-# CONFIG_TEHUTI is not set
+-# CONFIG_BNX2X is not set
+-# CONFIG_TR is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-
+-#
+-# USB Network Adapters
+-#
+-# CONFIG_USB_CATC is not set
+-# CONFIG_USB_KAWETH is not set
+-# CONFIG_USB_PEGASUS is not set
+-# CONFIG_USB_RTL8150 is not set
+-# CONFIG_USB_USBNET is not set
+-# CONFIG_WAN is not set
+-# CONFIG_FDDI is not set
+-# CONFIG_HIPPI is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NET_FC is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-CONFIG_INPUT=y
+-# CONFIG_INPUT_FF_MEMLESS is not set
+-# CONFIG_INPUT_POLLDEV is not set
+-
+-#
+-# Userland interfaces
+-#
+-# CONFIG_INPUT_MOUSEDEV is not set
+-# CONFIG_INPUT_JOYDEV is not set
+-# CONFIG_INPUT_EVDEV is not set
+-# CONFIG_INPUT_EVBUG is not set
+-
+-#
+-# Input Device Drivers
+-#
+-# CONFIG_INPUT_KEYBOARD is not set
+-# CONFIG_INPUT_MOUSE is not set
+-# CONFIG_INPUT_JOYSTICK is not set
+-# CONFIG_INPUT_TABLET is not set
+-# CONFIG_INPUT_TOUCHSCREEN is not set
+-# CONFIG_INPUT_MISC is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-# CONFIG_NOZOMI is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-CONFIG_SERIAL_8250_PCI=y
+-CONFIG_SERIAL_8250_NR_UARTS=4
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-# CONFIG_SERIAL_8250_EXTENDED is not set
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_JSM is not set
+-# CONFIG_SERIAL_OF_PLATFORM is not set
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-CONFIG_HW_RANDOM=y
+-# CONFIG_NVRAM is not set
+-# CONFIG_GEN_RTC is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_APPLICOM is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_DEVPORT=y
+-CONFIG_I2C=y
+-CONFIG_I2C_BOARDINFO=y
+-CONFIG_I2C_CHARDEV=y
+-
+-#
+-# I2C Algorithms
+-#
+-# CONFIG_I2C_ALGOBIT is not set
+-# CONFIG_I2C_ALGOPCF is not set
+-# CONFIG_I2C_ALGOPCA is not set
+-
+-#
+-# I2C Hardware Bus support
+-#
+-# CONFIG_I2C_ALI1535 is not set
+-# CONFIG_I2C_ALI1563 is not set
+-# CONFIG_I2C_ALI15X3 is not set
+-# CONFIG_I2C_AMD756 is not set
+-# CONFIG_I2C_AMD8111 is not set
+-# CONFIG_I2C_I801 is not set
+-# CONFIG_I2C_I810 is not set
+-# CONFIG_I2C_PIIX4 is not set
+-CONFIG_I2C_MPC=y
+-# CONFIG_I2C_NFORCE2 is not set
+-# CONFIG_I2C_OCORES is not set
+-# CONFIG_I2C_PARPORT_LIGHT is not set
+-# CONFIG_I2C_PROSAVAGE is not set
+-# CONFIG_I2C_SAVAGE4 is not set
+-# CONFIG_I2C_SIMTEC is not set
+-# CONFIG_I2C_SIS5595 is not set
+-# CONFIG_I2C_SIS630 is not set
+-# CONFIG_I2C_SIS96X is not set
+-# CONFIG_I2C_TAOS_EVM is not set
+-# CONFIG_I2C_STUB is not set
+-# CONFIG_I2C_TINY_USB is not set
+-# CONFIG_I2C_VIA is not set
+-# CONFIG_I2C_VIAPRO is not set
+-# CONFIG_I2C_VOODOO3 is not set
+-
+-#
+-# Miscellaneous I2C Chip support
+-#
+-# CONFIG_DS1682 is not set
+-# CONFIG_SENSORS_EEPROM is not set
+-# CONFIG_SENSORS_PCF8574 is not set
+-# CONFIG_PCF8575 is not set
+-# CONFIG_SENSORS_PCF8591 is not set
+-# CONFIG_TPS65010 is not set
+-# CONFIG_SENSORS_MAX6875 is not set
+-# CONFIG_SENSORS_TSL2550 is not set
+-# CONFIG_I2C_DEBUG_CORE is not set
+-# CONFIG_I2C_DEBUG_ALGO is not set
+-# CONFIG_I2C_DEBUG_BUS is not set
+-# CONFIG_I2C_DEBUG_CHIP is not set
+-
+-#
+-# SPI support
+-#
+-CONFIG_SPI=y
+-# CONFIG_SPI_DEBUG is not set
+-CONFIG_SPI_MASTER=y
+-
+-#
+-# SPI Master Controller Drivers
+-#
+-CONFIG_SPI_BITBANG=y
+-CONFIG_SPI_MPC83xx=y
+-
+-#
+-# SPI Protocol Masters
+-#
+-# CONFIG_SPI_AT25 is not set
+-# CONFIG_SPI_SPIDEV is not set
+-# CONFIG_SPI_TLE62X0 is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-CONFIG_HWMON=y
+-# CONFIG_HWMON_VID is not set
+-# CONFIG_SENSORS_AD7418 is not set
+-# CONFIG_SENSORS_ADM1021 is not set
+-# CONFIG_SENSORS_ADM1025 is not set
+-# CONFIG_SENSORS_ADM1026 is not set
+-# CONFIG_SENSORS_ADM1029 is not set
+-# CONFIG_SENSORS_ADM1031 is not set
+-# CONFIG_SENSORS_ADM9240 is not set
+-# CONFIG_SENSORS_ADT7470 is not set
+-# CONFIG_SENSORS_ADT7473 is not set
+-# CONFIG_SENSORS_ATXP1 is not set
+-# CONFIG_SENSORS_DS1621 is not set
+-# CONFIG_SENSORS_I5K_AMB is not set
+-# CONFIG_SENSORS_F71805F is not set
+-# CONFIG_SENSORS_F71882FG is not set
+-# CONFIG_SENSORS_F75375S is not set
+-# CONFIG_SENSORS_GL518SM is not set
+-# CONFIG_SENSORS_GL520SM is not set
+-# CONFIG_SENSORS_IT87 is not set
+-# CONFIG_SENSORS_LM63 is not set
+-# CONFIG_SENSORS_LM70 is not set
+-# CONFIG_SENSORS_LM75 is not set
+-# CONFIG_SENSORS_LM77 is not set
+-# CONFIG_SENSORS_LM78 is not set
+-# CONFIG_SENSORS_LM80 is not set
+-# CONFIG_SENSORS_LM83 is not set
+-# CONFIG_SENSORS_LM85 is not set
+-# CONFIG_SENSORS_LM87 is not set
+-# CONFIG_SENSORS_LM90 is not set
+-# CONFIG_SENSORS_LM92 is not set
+-# CONFIG_SENSORS_LM93 is not set
+-# CONFIG_SENSORS_MAX1619 is not set
+-# CONFIG_SENSORS_MAX6650 is not set
+-# CONFIG_SENSORS_PC87360 is not set
+-# CONFIG_SENSORS_PC87427 is not set
+-# CONFIG_SENSORS_SIS5595 is not set
+-# CONFIG_SENSORS_DME1737 is not set
+-# CONFIG_SENSORS_SMSC47M1 is not set
+-# CONFIG_SENSORS_SMSC47M192 is not set
+-# CONFIG_SENSORS_SMSC47B397 is not set
+-# CONFIG_SENSORS_ADS7828 is not set
+-# CONFIG_SENSORS_THMC50 is not set
+-# CONFIG_SENSORS_VIA686A is not set
+-# CONFIG_SENSORS_VT1211 is not set
+-# CONFIG_SENSORS_VT8231 is not set
+-# CONFIG_SENSORS_W83781D is not set
+-# CONFIG_SENSORS_W83791D is not set
+-# CONFIG_SENSORS_W83792D is not set
+-# CONFIG_SENSORS_W83793 is not set
+-# CONFIG_SENSORS_W83L785TS is not set
+-# CONFIG_SENSORS_W83L786NG is not set
+-# CONFIG_SENSORS_W83627HF is not set
+-# CONFIG_SENSORS_W83627EHF is not set
+-# CONFIG_HWMON_DEBUG_CHIP is not set
+-# CONFIG_THERMAL is not set
+-CONFIG_WATCHDOG=y
+-# CONFIG_WATCHDOG_NOWAYOUT is not set
+-
+-#
+-# Watchdog Device Drivers
+-#
+-# CONFIG_SOFT_WATCHDOG is not set
+-CONFIG_83xx_WDT=y
+-
+-#
+-# PCI-based Watchdog Cards
+-#
+-# CONFIG_PCIPCWATCHDOG is not set
+-# CONFIG_WDTPCI is not set
+-
+-#
+-# USB-based Watchdog Cards
+-#
+-# CONFIG_USBPCWATCHDOG is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-CONFIG_DAB=y
+-# CONFIG_USB_DABUSB is not set
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_AGP is not set
+-# CONFIG_DRM is not set
+-# CONFIG_VGASTATE is not set
+-CONFIG_VIDEO_OUTPUT_CONTROL=m
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-CONFIG_HID_SUPPORT=y
+-CONFIG_HID=y
+-# CONFIG_HID_DEBUG is not set
+-# CONFIG_HIDRAW is not set
+-
+-#
+-# USB Input Devices
+-#
+-# CONFIG_USB_HID is not set
+-
+-#
+-# USB HID Boot Protocol drivers
+-#
+-# CONFIG_USB_KBD is not set
+-# CONFIG_USB_MOUSE is not set
+-CONFIG_USB_SUPPORT=y
+-CONFIG_USB_ARCH_HAS_HCD=y
+-CONFIG_USB_ARCH_HAS_OHCI=y
+-CONFIG_USB_ARCH_HAS_EHCI=y
+-CONFIG_USB=y
+-# CONFIG_USB_DEBUG is not set
+-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+-
+-#
+-# Miscellaneous USB options
+-#
+-CONFIG_USB_DEVICEFS=y
+-CONFIG_USB_DEVICE_CLASS=y
+-# CONFIG_USB_DYNAMIC_MINORS is not set
+-# CONFIG_USB_OTG is not set
+-
+-#
+-# USB Host Controller Drivers
+-#
+-CONFIG_USB_EHCI_HCD=y
+-CONFIG_USB_EHCI_ROOT_HUB_TT=y
+-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+-CONFIG_USB_EHCI_FSL=y
+-CONFIG_USB_EHCI_HCD_PPC_OF=y
+-# CONFIG_USB_ISP116X_HCD is not set
+-CONFIG_USB_OHCI_HCD=y
+-CONFIG_USB_OHCI_HCD_PPC_OF=y
+-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+-CONFIG_USB_OHCI_HCD_PCI=y
+-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+-CONFIG_USB_UHCI_HCD=y
+-# CONFIG_USB_SL811_HCD is not set
+-# CONFIG_USB_R8A66597_HCD is not set
+-
+-#
+-# USB Device Class drivers
+-#
+-# CONFIG_USB_ACM is not set
+-# CONFIG_USB_PRINTER is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-
+-#
+-# may also be needed; see USB_STORAGE Help for more information
+-#
+-CONFIG_USB_STORAGE=y
+-# CONFIG_USB_STORAGE_DEBUG is not set
+-# CONFIG_USB_STORAGE_DATAFAB is not set
+-# CONFIG_USB_STORAGE_FREECOM is not set
+-# CONFIG_USB_STORAGE_ISD200 is not set
+-# CONFIG_USB_STORAGE_DPCM is not set
+-# CONFIG_USB_STORAGE_USBAT is not set
+-# CONFIG_USB_STORAGE_SDDR09 is not set
+-# CONFIG_USB_STORAGE_SDDR55 is not set
+-# CONFIG_USB_STORAGE_JUMPSHOT is not set
+-# CONFIG_USB_STORAGE_ALAUDA is not set
+-# CONFIG_USB_STORAGE_KARMA is not set
+-# CONFIG_USB_LIBUSUAL is not set
+-
+-#
+-# USB Imaging devices
+-#
+-# CONFIG_USB_MDC800 is not set
+-# CONFIG_USB_MICROTEK is not set
+-CONFIG_USB_MON=y
+-
+-#
+-# USB port drivers
+-#
+-# CONFIG_USB_SERIAL is not set
+-
+-#
+-# USB Miscellaneous drivers
+-#
+-# CONFIG_USB_EMI62 is not set
+-# CONFIG_USB_EMI26 is not set
+-# CONFIG_USB_ADUTUX is not set
+-# CONFIG_USB_AUERSWALD is not set
+-# CONFIG_USB_RIO500 is not set
+-# CONFIG_USB_LEGOTOWER is not set
+-# CONFIG_USB_LCD is not set
+-# CONFIG_USB_BERRY_CHARGE is not set
+-# CONFIG_USB_LED is not set
+-# CONFIG_USB_CYPRESS_CY7C63 is not set
+-# CONFIG_USB_CYTHERM is not set
+-# CONFIG_USB_PHIDGET is not set
+-# CONFIG_USB_IDMOUSE is not set
+-# CONFIG_USB_FTDI_ELAN is not set
+-# CONFIG_USB_APPLEDISPLAY is not set
+-# CONFIG_USB_SISUSBVGA is not set
+-# CONFIG_USB_LD is not set
+-# CONFIG_USB_TRANCEVIBRATOR is not set
+-# CONFIG_USB_IOWARRIOR is not set
+-# CONFIG_USB_TEST is not set
+-CONFIG_USB_GADGET=y
+-# CONFIG_USB_GADGET_DEBUG is not set
+-# CONFIG_USB_GADGET_DEBUG_FILES is not set
+-CONFIG_USB_GADGET_SELECTED=y
+-# CONFIG_USB_GADGET_AMD5536UDC is not set
+-# CONFIG_USB_GADGET_ATMEL_USBA is not set
+-# CONFIG_USB_GADGET_FSL_USB2 is not set
+-CONFIG_USB_GADGET_NET2280=y
+-CONFIG_USB_NET2280=y
+-# CONFIG_USB_GADGET_PXA2XX is not set
+-# CONFIG_USB_GADGET_M66592 is not set
+-# CONFIG_USB_GADGET_GOKU is not set
+-# CONFIG_USB_GADGET_LH7A40X is not set
+-# CONFIG_USB_GADGET_OMAP is not set
+-# CONFIG_USB_GADGET_S3C2410 is not set
+-# CONFIG_USB_GADGET_AT91 is not set
+-# CONFIG_USB_GADGET_DUMMY_HCD is not set
+-CONFIG_USB_GADGET_DUALSPEED=y
+-# CONFIG_USB_ZERO is not set
+-CONFIG_USB_ETH=y
+-CONFIG_USB_ETH_RNDIS=y
+-# CONFIG_USB_GADGETFS is not set
+-# CONFIG_USB_FILE_STORAGE is not set
+-# CONFIG_USB_G_SERIAL is not set
+-# CONFIG_USB_MIDI_GADGET is not set
+-# CONFIG_USB_G_PRINTER is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_INFINIBAND is not set
+-# CONFIG_EDAC is not set
+-CONFIG_RTC_LIB=y
+-CONFIG_RTC_CLASS=y
+-CONFIG_RTC_HCTOSYS=y
+-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+-# CONFIG_RTC_DEBUG is not set
+-
+-#
+-# RTC interfaces
+-#
+-CONFIG_RTC_INTF_SYSFS=y
+-CONFIG_RTC_INTF_PROC=y
+-CONFIG_RTC_INTF_DEV=y
+-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+-# CONFIG_RTC_DRV_TEST is not set
+-
+-#
+-# I2C RTC drivers
+-#
+-CONFIG_RTC_DRV_DS1307=y
+-# CONFIG_RTC_DRV_DS1374 is not set
+-# CONFIG_RTC_DRV_DS1672 is not set
+-# CONFIG_RTC_DRV_MAX6900 is not set
+-# CONFIG_RTC_DRV_RS5C372 is not set
+-# CONFIG_RTC_DRV_ISL1208 is not set
+-# CONFIG_RTC_DRV_X1205 is not set
+-# CONFIG_RTC_DRV_PCF8563 is not set
+-# CONFIG_RTC_DRV_PCF8583 is not set
+-# CONFIG_RTC_DRV_M41T80 is not set
+-# CONFIG_RTC_DRV_S35390A is not set
+-
+-#
+-# SPI RTC drivers
+-#
+-# CONFIG_RTC_DRV_MAX6902 is not set
+-# CONFIG_RTC_DRV_R9701 is not set
+-# CONFIG_RTC_DRV_RS5C348 is not set
+-
+-#
+-# Platform RTC drivers
+-#
+-# CONFIG_RTC_DRV_CMOS is not set
+-# CONFIG_RTC_DRV_DS1511 is not set
+-# CONFIG_RTC_DRV_DS1553 is not set
+-# CONFIG_RTC_DRV_DS1742 is not set
+-# CONFIG_RTC_DRV_STK17TA8 is not set
+-# CONFIG_RTC_DRV_M48T86 is not set
+-# CONFIG_RTC_DRV_M48T59 is not set
+-# CONFIG_RTC_DRV_V3020 is not set
+-
+-#
+-# on-CPU RTC drivers
+-#
+-# CONFIG_DMADEVICES is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=y
+-CONFIG_EXT3_FS_XATTR=y
+-# CONFIG_EXT3_FS_POSIX_ACL is not set
+-# CONFIG_EXT3_FS_SECURITY is not set
+-# CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=y
+-CONFIG_FS_MBCACHE=y
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-# CONFIG_MSDOS_FS is not set
+-# CONFIG_VFAT_FS is not set
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-CONFIG_JFFS2_FS=y
+-CONFIG_JFFS2_FS_DEBUG=0
+-CONFIG_JFFS2_FS_WRITEBUFFER=y
+-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+-# CONFIG_JFFS2_SUMMARY is not set
+-# CONFIG_JFFS2_FS_XATTR is not set
+-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+-CONFIG_JFFS2_ZLIB=y
+-# CONFIG_JFFS2_LZO is not set
+-CONFIG_JFFS2_RTIME=y
+-# CONFIG_JFFS2_RUBIN is not set
+-# CONFIG_CRAMFS is not set
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-CONFIG_NFS_V3=y
+-# CONFIG_NFS_V3_ACL is not set
+-CONFIG_NFS_V4=y
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_LOCKD_V4=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-CONFIG_SUNRPC_GSS=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-CONFIG_RPCSEC_GSS_KRB5=y
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-CONFIG_PARTITION_ADVANCED=y
+-# CONFIG_ACORN_PARTITION is not set
+-# CONFIG_OSF_PARTITION is not set
+-# CONFIG_AMIGA_PARTITION is not set
+-# CONFIG_ATARI_PARTITION is not set
+-# CONFIG_MAC_PARTITION is not set
+-CONFIG_MSDOS_PARTITION=y
+-# CONFIG_BSD_DISKLABEL is not set
+-# CONFIG_MINIX_SUBPARTITION is not set
+-# CONFIG_SOLARIS_X86_PARTITION is not set
+-# CONFIG_UNIXWARE_DISKLABEL is not set
+-# CONFIG_LDM_PARTITION is not set
+-# CONFIG_SGI_PARTITION is not set
+-# CONFIG_ULTRIX_PARTITION is not set
+-# CONFIG_SUN_PARTITION is not set
+-# CONFIG_KARMA_PARTITION is not set
+-# CONFIG_EFI_PARTITION is not set
+-# CONFIG_SYSV68_PARTITION is not set
+-# CONFIG_NLS is not set
+-# CONFIG_DLM is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_ZLIB_INFLATE=y
+-CONFIG_ZLIB_DEFLATE=y
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-# CONFIG_MAGIC_SYSRQ is not set
+-# CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
+-# CONFIG_HEADERS_CHECK is not set
+-CONFIG_DEBUG_KERNEL=y
+-# CONFIG_DEBUG_SHIRQ is not set
+-CONFIG_DETECT_SOFTLOCKUP=y
+-CONFIG_SCHED_DEBUG=y
+-# CONFIG_SCHEDSTATS is not set
+-# CONFIG_TIMER_STATS is not set
+-# CONFIG_SLUB_DEBUG_ON is not set
+-# CONFIG_SLUB_STATS is not set
+-# CONFIG_DEBUG_RT_MUTEXES is not set
+-# CONFIG_RT_MUTEX_TESTER is not set
+-# CONFIG_DEBUG_SPINLOCK is not set
+-# CONFIG_DEBUG_MUTEXES is not set
+-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+-# CONFIG_DEBUG_KOBJECT is not set
+-# CONFIG_DEBUG_BUGVERBOSE is not set
+-# CONFIG_DEBUG_INFO is not set
+-# CONFIG_DEBUG_VM is not set
+-# CONFIG_DEBUG_LIST is not set
+-# CONFIG_DEBUG_SG is not set
+-# CONFIG_BOOT_PRINTK_DELAY is not set
+-# CONFIG_RCU_TORTURE_TEST is not set
+-# CONFIG_BACKTRACE_SELF_TEST is not set
+-# CONFIG_FAULT_INJECTION is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_DEBUG_STACKOVERFLOW is not set
+-# CONFIG_DEBUG_STACK_USAGE is not set
+-# CONFIG_DEBUG_PAGEALLOC is not set
+-# CONFIG_DEBUGGER is not set
+-# CONFIG_BDI_SWITCH is not set
+-# CONFIG_PPC_EARLY_DEBUG is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_BLKCIPHER=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-CONFIG_CRYPTO_MANAGER=y
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-CONFIG_CRYPTO_MD5=y
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-# CONFIG_CRYPTO_ECB is not set
+-CONFIG_CRYPTO_CBC=y
+-CONFIG_CRYPTO_PCBC=m
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-CONFIG_CRYPTO_DES=y
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_TEST is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+-# CONFIG_PPC_CLOCK is not set
+--- a/arch/powerpc/configs/mpc8315_rdb_defconfig
++++ /dev/null
+@@ -1,1451 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc6
+-# Mon Mar 24 08:48:15 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-CONFIG_6xx=y
+-# CONFIG_PPC_85xx is not set
+-# CONFIG_PPC_8xx is not set
+-# CONFIG_40x is not set
+-# CONFIG_44x is not set
+-# CONFIG_E200 is not set
+-CONFIG_PPC_FPU=y
+-# CONFIG_FSL_EMB_PERFMON is not set
+-CONFIG_PPC_STD_MMU=y
+-CONFIG_PPC_STD_MMU_32=y
+-# CONFIG_PPC_MM_SLICES is not set
+-# CONFIG_SMP is not set
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-CONFIG_DEFAULT_UIMAGE=y
+-# CONFIG_PPC_DCR_NATIVE is not set
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-# CONFIG_POSIX_MQUEUE is not set
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-# CONFIG_FAIR_GROUP_SCHED is not set
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-CONFIG_SYSFS_DEPRECATED_V2=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-# CONFIG_KALLSYMS is not set
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-# CONFIG_EPOLL is not set
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLUB_DEBUG=y
+-# CONFIG_SLAB is not set
+-CONFIG_SLUB=y
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_HAVE_KRETPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-CONFIG_MODULES=y
+-CONFIG_MODULE_UNLOAD=y
+-# CONFIG_MODULE_FORCE_UNLOAD is not set
+-# CONFIG_MODVERSIONS is not set
+-# CONFIG_MODULE_SRCVERSION_ALL is not set
+-# CONFIG_KMOD is not set
+-CONFIG_BLOCK=y
+-# CONFIG_LBD is not set
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MULTIPLATFORM is not set
+-# CONFIG_PPC_82xx is not set
+-CONFIG_PPC_83xx=y
+-# CONFIG_PPC_86xx is not set
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-CONFIG_MPC83xx=y
+-CONFIG_MPC831x_RDB=y
+-# CONFIG_MPC832x_MDS is not set
+-# CONFIG_MPC832x_RDB is not set
+-# CONFIG_MPC834x_MDS is not set
+-# CONFIG_MPC834x_ITX is not set
+-# CONFIG_MPC836x_MDS is not set
+-# CONFIG_MPC837x_MDS is not set
+-# CONFIG_MPC837x_RDB is not set
+-# CONFIG_SBC834x is not set
+-CONFIG_PPC_MPC831x=y
+-CONFIG_IPIC=y
+-# CONFIG_MPIC is not set
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-# CONFIG_FSL_ULI1575 is not set
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-CONFIG_TICK_ONESHOT=y
+-CONFIG_NO_HZ=y
+-CONFIG_HIGH_RES_TIMERS=y
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_BINFMT_ELF=y
+-# CONFIG_BINFMT_MISC is not set
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_RESOURCES_64BIT is not set
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-CONFIG_PROC_DEVICETREE=y
+-# CONFIG_CMDLINE_BOOL is not set
+-# CONFIG_PM is not set
+-CONFIG_SECCOMP=y
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_GENERIC_ISA_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_FSL_SOC=y
+-CONFIG_PCI=y
+-CONFIG_PCI_DOMAINS=y
+-CONFIG_PCI_SYSCALL=y
+-# CONFIG_PCIEPORTBUS is not set
+-CONFIG_ARCH_SUPPORTS_MSI=y
+-# CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
+-# CONFIG_PCI_DEBUG is not set
+-# CONFIG_PCCARD is not set
+-# CONFIG_HOTPLUG_PCI is not set
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_BOOT_LOAD=0x00800000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-CONFIG_XFRM=y
+-# CONFIG_XFRM_USER is not set
+-# CONFIG_XFRM_SUB_POLICY is not set
+-# CONFIG_XFRM_MIGRATE is not set
+-# CONFIG_XFRM_STATISTICS is not set
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-CONFIG_IP_MULTICAST=y
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_IP_MROUTE is not set
+-# CONFIG_ARPD is not set
+-CONFIG_SYN_COOKIES=y
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-CONFIG_INET_XFRM_MODE_TRANSPORT=y
+-CONFIG_INET_XFRM_MODE_TUNNEL=y
+-CONFIG_INET_XFRM_MODE_BEET=y
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-# CONFIG_FW_LOADER is not set
+-# CONFIG_DEBUG_DRIVER is not set
+-# CONFIG_DEBUG_DEVRES is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-# CONFIG_CONNECTOR is not set
+-CONFIG_MTD=y
+-# CONFIG_MTD_DEBUG is not set
+-# CONFIG_MTD_CONCAT is not set
+-CONFIG_MTD_PARTITIONS=y
+-# CONFIG_MTD_REDBOOT_PARTS is not set
+-# CONFIG_MTD_CMDLINE_PARTS is not set
+-# CONFIG_MTD_OF_PARTS is not set
+-
+-#
+-# User Modules And Translation Layers
+-#
+-CONFIG_MTD_CHAR=y
+-CONFIG_MTD_BLKDEVS=y
+-CONFIG_MTD_BLOCK=y
+-# CONFIG_FTL is not set
+-# CONFIG_NFTL is not set
+-# CONFIG_INFTL is not set
+-# CONFIG_RFD_FTL is not set
+-# CONFIG_SSFDC is not set
+-# CONFIG_MTD_OOPS is not set
+-
+-#
+-# RAM/ROM/Flash chip drivers
+-#
+-CONFIG_MTD_CFI=y
+-# CONFIG_MTD_JEDECPROBE is not set
+-CONFIG_MTD_GEN_PROBE=y
+-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+-CONFIG_MTD_MAP_BANK_WIDTH_1=y
+-CONFIG_MTD_MAP_BANK_WIDTH_2=y
+-CONFIG_MTD_MAP_BANK_WIDTH_4=y
+-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+-CONFIG_MTD_CFI_I1=y
+-CONFIG_MTD_CFI_I2=y
+-# CONFIG_MTD_CFI_I4 is not set
+-# CONFIG_MTD_CFI_I8 is not set
+-# CONFIG_MTD_CFI_INTELEXT is not set
+-CONFIG_MTD_CFI_AMDSTD=y
+-# CONFIG_MTD_CFI_STAA is not set
+-CONFIG_MTD_CFI_UTIL=y
+-# CONFIG_MTD_RAM is not set
+-# CONFIG_MTD_ROM is not set
+-# CONFIG_MTD_ABSENT is not set
+-
+-#
+-# Mapping drivers for chip access
+-#
+-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+-# CONFIG_MTD_PHYSMAP is not set
+-CONFIG_MTD_PHYSMAP_OF=y
+-# CONFIG_MTD_INTEL_VR_NOR is not set
+-# CONFIG_MTD_PLATRAM is not set
+-
+-#
+-# Self-contained MTD device drivers
+-#
+-# CONFIG_MTD_PMC551 is not set
+-# CONFIG_MTD_DATAFLASH is not set
+-# CONFIG_MTD_M25P80 is not set
+-# CONFIG_MTD_SLRAM is not set
+-# CONFIG_MTD_PHRAM is not set
+-# CONFIG_MTD_MTDRAM is not set
+-# CONFIG_MTD_BLOCK2MTD is not set
+-
+-#
+-# Disk-On-Chip Device Drivers
+-#
+-# CONFIG_MTD_DOC2000 is not set
+-# CONFIG_MTD_DOC2001 is not set
+-# CONFIG_MTD_DOC2001PLUS is not set
+-CONFIG_MTD_NAND=y
+-CONFIG_MTD_NAND_VERIFY_WRITE=y
+-# CONFIG_MTD_NAND_ECC_SMC is not set
+-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+-CONFIG_MTD_NAND_IDS=y
+-# CONFIG_MTD_NAND_DISKONCHIP is not set
+-# CONFIG_MTD_NAND_CAFE is not set
+-# CONFIG_MTD_NAND_NANDSIM is not set
+-# CONFIG_MTD_NAND_PLATFORM is not set
+-# CONFIG_MTD_ALAUDA is not set
+-# CONFIG_MTD_NAND_FSL_ELBC is not set
+-# CONFIG_MTD_ONENAND is not set
+-
+-#
+-# UBI - Unsorted block images
+-#
+-# CONFIG_MTD_UBI is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_CPQ_DA is not set
+-# CONFIG_BLK_CPQ_CISS_DA is not set
+-# CONFIG_BLK_DEV_DAC960 is not set
+-# CONFIG_BLK_DEV_UMEM is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-CONFIG_BLK_DEV_LOOP=y
+-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-# CONFIG_BLK_DEV_SX8 is not set
+-# CONFIG_BLK_DEV_UB is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=32768
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_PHANTOM is not set
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_SGI_IOC4 is not set
+-# CONFIG_TIFM_CORE is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-# CONFIG_IDE is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-CONFIG_SCSI=y
+-CONFIG_SCSI_DMA=y
+-# CONFIG_SCSI_TGT is not set
+-# CONFIG_SCSI_NETLINK is not set
+-CONFIG_SCSI_PROC_FS=y
+-
+-#
+-# SCSI support type (disk, tape, CD-ROM)
+-#
+-# CONFIG_BLK_DEV_SD is not set
+-# CONFIG_CHR_DEV_ST is not set
+-# CONFIG_CHR_DEV_OSST is not set
+-# CONFIG_BLK_DEV_SR is not set
+-CONFIG_CHR_DEV_SG=y
+-# CONFIG_CHR_DEV_SCH is not set
+-
+-#
+-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+-#
+-# CONFIG_SCSI_MULTI_LUN is not set
+-# CONFIG_SCSI_CONSTANTS is not set
+-# CONFIG_SCSI_LOGGING is not set
+-# CONFIG_SCSI_SCAN_ASYNC is not set
+-CONFIG_SCSI_WAIT_SCAN=m
+-
+-#
+-# SCSI Transports
+-#
+-CONFIG_SCSI_SPI_ATTRS=y
+-# CONFIG_SCSI_FC_ATTRS is not set
+-# CONFIG_SCSI_ISCSI_ATTRS is not set
+-# CONFIG_SCSI_SAS_LIBSAS is not set
+-# CONFIG_SCSI_SRP_ATTRS is not set
+-CONFIG_SCSI_LOWLEVEL=y
+-# CONFIG_ISCSI_TCP is not set
+-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+-# CONFIG_SCSI_3W_9XXX is not set
+-# CONFIG_SCSI_ACARD is not set
+-# CONFIG_SCSI_AACRAID is not set
+-# CONFIG_SCSI_AIC7XXX is not set
+-# CONFIG_SCSI_AIC7XXX_OLD is not set
+-# CONFIG_SCSI_AIC79XX is not set
+-# CONFIG_SCSI_AIC94XX is not set
+-# CONFIG_SCSI_DPT_I2O is not set
+-# CONFIG_SCSI_ADVANSYS is not set
+-# CONFIG_SCSI_ARCMSR is not set
+-# CONFIG_MEGARAID_NEWGEN is not set
+-# CONFIG_MEGARAID_LEGACY is not set
+-# CONFIG_MEGARAID_SAS is not set
+-# CONFIG_SCSI_HPTIOP is not set
+-# CONFIG_SCSI_BUSLOGIC is not set
+-# CONFIG_SCSI_DMX3191D is not set
+-# CONFIG_SCSI_EATA is not set
+-# CONFIG_SCSI_FUTURE_DOMAIN is not set
+-# CONFIG_SCSI_GDTH is not set
+-# CONFIG_SCSI_IPS is not set
+-# CONFIG_SCSI_INITIO is not set
+-# CONFIG_SCSI_INIA100 is not set
+-# CONFIG_SCSI_MVSAS is not set
+-# CONFIG_SCSI_STEX is not set
+-# CONFIG_SCSI_SYM53C8XX_2 is not set
+-# CONFIG_SCSI_IPR is not set
+-# CONFIG_SCSI_QLOGIC_1280 is not set
+-# CONFIG_SCSI_QLA_FC is not set
+-# CONFIG_SCSI_QLA_ISCSI is not set
+-# CONFIG_SCSI_LPFC is not set
+-# CONFIG_SCSI_DC395x is not set
+-# CONFIG_SCSI_DC390T is not set
+-# CONFIG_SCSI_NSP32 is not set
+-# CONFIG_SCSI_DEBUG is not set
+-# CONFIG_SCSI_SRP is not set
+-CONFIG_ATA=y
+-# CONFIG_ATA_NONSTANDARD is not set
+-# CONFIG_SATA_AHCI is not set
+-# CONFIG_SATA_SVW is not set
+-# CONFIG_ATA_PIIX is not set
+-# CONFIG_SATA_MV is not set
+-# CONFIG_SATA_NV is not set
+-# CONFIG_PDC_ADMA is not set
+-# CONFIG_SATA_QSTOR is not set
+-# CONFIG_SATA_PROMISE is not set
+-# CONFIG_SATA_SX4 is not set
+-# CONFIG_SATA_SIL is not set
+-# CONFIG_SATA_SIL24 is not set
+-# CONFIG_SATA_SIS is not set
+-# CONFIG_SATA_ULI is not set
+-# CONFIG_SATA_VIA is not set
+-# CONFIG_SATA_VITESSE is not set
+-# CONFIG_SATA_INIC162X is not set
+-CONFIG_SATA_FSL=y
+-# CONFIG_PATA_ALI is not set
+-# CONFIG_PATA_AMD is not set
+-# CONFIG_PATA_ARTOP is not set
+-# CONFIG_PATA_ATIIXP is not set
+-# CONFIG_PATA_CMD640_PCI is not set
+-# CONFIG_PATA_CMD64X is not set
+-# CONFIG_PATA_CS5520 is not set
+-# CONFIG_PATA_CS5530 is not set
+-# CONFIG_PATA_CYPRESS is not set
+-# CONFIG_PATA_EFAR is not set
+-# CONFIG_ATA_GENERIC is not set
+-# CONFIG_PATA_HPT366 is not set
+-# CONFIG_PATA_HPT37X is not set
+-# CONFIG_PATA_HPT3X2N is not set
+-# CONFIG_PATA_HPT3X3 is not set
+-# CONFIG_PATA_IT821X is not set
+-# CONFIG_PATA_IT8213 is not set
+-# CONFIG_PATA_JMICRON is not set
+-# CONFIG_PATA_TRIFLEX is not set
+-# CONFIG_PATA_MARVELL is not set
+-# CONFIG_PATA_MPIIX is not set
+-# CONFIG_PATA_OLDPIIX is not set
+-# CONFIG_PATA_NETCELL is not set
+-# CONFIG_PATA_NINJA32 is not set
+-# CONFIG_PATA_NS87410 is not set
+-# CONFIG_PATA_NS87415 is not set
+-# CONFIG_PATA_OPTI is not set
+-# CONFIG_PATA_OPTIDMA is not set
+-# CONFIG_PATA_PDC_OLD is not set
+-# CONFIG_PATA_RADISYS is not set
+-# CONFIG_PATA_RZ1000 is not set
+-# CONFIG_PATA_SC1200 is not set
+-# CONFIG_PATA_SERVERWORKS is not set
+-# CONFIG_PATA_PDC2027X is not set
+-# CONFIG_PATA_SIL680 is not set
+-# CONFIG_PATA_SIS is not set
+-# CONFIG_PATA_VIA is not set
+-# CONFIG_PATA_WINBOND is not set
+-# CONFIG_PATA_PLATFORM is not set
+-CONFIG_MD=y
+-CONFIG_BLK_DEV_MD=y
+-CONFIG_MD_LINEAR=y
+-CONFIG_MD_RAID0=y
+-CONFIG_MD_RAID1=y
+-# CONFIG_MD_RAID10 is not set
+-# CONFIG_MD_RAID456 is not set
+-# CONFIG_MD_MULTIPATH is not set
+-# CONFIG_MD_FAULTY is not set
+-# CONFIG_BLK_DEV_DM is not set
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-# CONFIG_FIREWIRE is not set
+-# CONFIG_IEEE1394 is not set
+-# CONFIG_I2O is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_ARCNET is not set
+-CONFIG_PHYLIB=y
+-
+-#
+-# MII PHY device drivers
+-#
+-# CONFIG_MARVELL_PHY is not set
+-# CONFIG_DAVICOM_PHY is not set
+-# CONFIG_QSEMI_PHY is not set
+-# CONFIG_LXT_PHY is not set
+-# CONFIG_CICADA_PHY is not set
+-# CONFIG_VITESSE_PHY is not set
+-# CONFIG_SMSC_PHY is not set
+-# CONFIG_BROADCOM_PHY is not set
+-# CONFIG_ICPLUS_PHY is not set
+-# CONFIG_REALTEK_PHY is not set
+-# CONFIG_FIXED_PHY is not set
+-# CONFIG_MDIO_BITBANG is not set
+-CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
+-# CONFIG_HAPPYMEAL is not set
+-# CONFIG_SUNGEM is not set
+-# CONFIG_CASSINI is not set
+-# CONFIG_NET_VENDOR_3COM is not set
+-# CONFIG_ENC28J60 is not set
+-# CONFIG_NET_TULIP is not set
+-# CONFIG_HP100 is not set
+-# CONFIG_IBM_NEW_EMAC_ZMII is not set
+-# CONFIG_IBM_NEW_EMAC_RGMII is not set
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-CONFIG_NET_PCI=y
+-# CONFIG_PCNET32 is not set
+-# CONFIG_AMD8111_ETH is not set
+-# CONFIG_ADAPTEC_STARFIRE is not set
+-# CONFIG_B44 is not set
+-# CONFIG_FORCEDETH is not set
+-# CONFIG_EEPRO100 is not set
+-CONFIG_E100=y
+-# CONFIG_FEALNX is not set
+-# CONFIG_NATSEMI is not set
+-# CONFIG_NE2K_PCI is not set
+-# CONFIG_8139CP is not set
+-# CONFIG_8139TOO is not set
+-# CONFIG_R6040 is not set
+-# CONFIG_SIS900 is not set
+-# CONFIG_EPIC100 is not set
+-# CONFIG_SUNDANCE is not set
+-# CONFIG_TLAN is not set
+-# CONFIG_VIA_RHINE is not set
+-# CONFIG_SC92031 is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_ACENIC is not set
+-# CONFIG_DL2K is not set
+-# CONFIG_E1000 is not set
+-# CONFIG_E1000E is not set
+-# CONFIG_E1000E_ENABLED is not set
+-# CONFIG_IP1000 is not set
+-# CONFIG_IGB is not set
+-# CONFIG_NS83820 is not set
+-# CONFIG_HAMACHI is not set
+-# CONFIG_YELLOWFIN is not set
+-# CONFIG_R8169 is not set
+-# CONFIG_SIS190 is not set
+-# CONFIG_SKGE is not set
+-# CONFIG_SKY2 is not set
+-# CONFIG_SK98LIN is not set
+-# CONFIG_VIA_VELOCITY is not set
+-# CONFIG_TIGON3 is not set
+-# CONFIG_BNX2 is not set
+-CONFIG_GIANFAR=y
+-CONFIG_GFAR_NAPI=y
+-# CONFIG_QLA3XXX is not set
+-# CONFIG_ATL1 is not set
+-CONFIG_NETDEV_10000=y
+-# CONFIG_CHELSIO_T1 is not set
+-# CONFIG_CHELSIO_T3 is not set
+-# CONFIG_IXGBE is not set
+-# CONFIG_IXGB is not set
+-# CONFIG_S2IO is not set
+-# CONFIG_MYRI10GE is not set
+-# CONFIG_NETXEN_NIC is not set
+-# CONFIG_NIU is not set
+-# CONFIG_MLX4_CORE is not set
+-# CONFIG_TEHUTI is not set
+-# CONFIG_BNX2X is not set
+-# CONFIG_TR is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-
+-#
+-# USB Network Adapters
+-#
+-# CONFIG_USB_CATC is not set
+-# CONFIG_USB_KAWETH is not set
+-# CONFIG_USB_PEGASUS is not set
+-# CONFIG_USB_RTL8150 is not set
+-# CONFIG_USB_USBNET is not set
+-# CONFIG_WAN is not set
+-# CONFIG_FDDI is not set
+-# CONFIG_HIPPI is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NET_FC is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-CONFIG_INPUT=y
+-# CONFIG_INPUT_FF_MEMLESS is not set
+-# CONFIG_INPUT_POLLDEV is not set
+-
+-#
+-# Userland interfaces
+-#
+-# CONFIG_INPUT_MOUSEDEV is not set
+-# CONFIG_INPUT_JOYDEV is not set
+-# CONFIG_INPUT_EVDEV is not set
+-# CONFIG_INPUT_EVBUG is not set
+-
+-#
+-# Input Device Drivers
+-#
+-# CONFIG_INPUT_KEYBOARD is not set
+-# CONFIG_INPUT_MOUSE is not set
+-# CONFIG_INPUT_JOYSTICK is not set
+-# CONFIG_INPUT_TABLET is not set
+-# CONFIG_INPUT_TOUCHSCREEN is not set
+-# CONFIG_INPUT_MISC is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-# CONFIG_NOZOMI is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-CONFIG_SERIAL_8250_PCI=y
+-CONFIG_SERIAL_8250_NR_UARTS=4
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-# CONFIG_SERIAL_8250_EXTENDED is not set
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_JSM is not set
+-# CONFIG_SERIAL_OF_PLATFORM is not set
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-CONFIG_HW_RANDOM=y
+-# CONFIG_NVRAM is not set
+-# CONFIG_GEN_RTC is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_APPLICOM is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_DEVPORT=y
+-CONFIG_I2C=y
+-CONFIG_I2C_BOARDINFO=y
+-CONFIG_I2C_CHARDEV=y
+-
+-#
+-# I2C Algorithms
+-#
+-# CONFIG_I2C_ALGOBIT is not set
+-# CONFIG_I2C_ALGOPCF is not set
+-# CONFIG_I2C_ALGOPCA is not set
+-
+-#
+-# I2C Hardware Bus support
+-#
+-# CONFIG_I2C_ALI1535 is not set
+-# CONFIG_I2C_ALI1563 is not set
+-# CONFIG_I2C_ALI15X3 is not set
+-# CONFIG_I2C_AMD756 is not set
+-# CONFIG_I2C_AMD8111 is not set
+-# CONFIG_I2C_I801 is not set
+-# CONFIG_I2C_I810 is not set
+-# CONFIG_I2C_PIIX4 is not set
+-CONFIG_I2C_MPC=y
+-# CONFIG_I2C_NFORCE2 is not set
+-# CONFIG_I2C_OCORES is not set
+-# CONFIG_I2C_PARPORT_LIGHT is not set
+-# CONFIG_I2C_PROSAVAGE is not set
+-# CONFIG_I2C_SAVAGE4 is not set
+-# CONFIG_I2C_SIMTEC is not set
+-# CONFIG_I2C_SIS5595 is not set
+-# CONFIG_I2C_SIS630 is not set
+-# CONFIG_I2C_SIS96X is not set
+-# CONFIG_I2C_TAOS_EVM is not set
+-# CONFIG_I2C_STUB is not set
+-# CONFIG_I2C_TINY_USB is not set
+-# CONFIG_I2C_VIA is not set
+-# CONFIG_I2C_VIAPRO is not set
+-# CONFIG_I2C_VOODOO3 is not set
+-
+-#
+-# Miscellaneous I2C Chip support
+-#
+-# CONFIG_DS1682 is not set
+-# CONFIG_SENSORS_EEPROM is not set
+-# CONFIG_SENSORS_PCF8574 is not set
+-# CONFIG_PCF8575 is not set
+-# CONFIG_SENSORS_PCF8591 is not set
+-# CONFIG_TPS65010 is not set
+-# CONFIG_SENSORS_MAX6875 is not set
+-# CONFIG_SENSORS_TSL2550 is not set
+-# CONFIG_I2C_DEBUG_CORE is not set
+-# CONFIG_I2C_DEBUG_ALGO is not set
+-# CONFIG_I2C_DEBUG_BUS is not set
+-# CONFIG_I2C_DEBUG_CHIP is not set
+-
+-#
+-# SPI support
+-#
+-CONFIG_SPI=y
+-# CONFIG_SPI_DEBUG is not set
+-CONFIG_SPI_MASTER=y
+-
+-#
+-# SPI Master Controller Drivers
+-#
+-CONFIG_SPI_BITBANG=y
+-CONFIG_SPI_MPC83xx=y
+-
+-#
+-# SPI Protocol Masters
+-#
+-# CONFIG_SPI_AT25 is not set
+-# CONFIG_SPI_SPIDEV is not set
+-# CONFIG_SPI_TLE62X0 is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-CONFIG_HWMON=y
+-# CONFIG_HWMON_VID is not set
+-# CONFIG_SENSORS_AD7418 is not set
+-# CONFIG_SENSORS_ADM1021 is not set
+-# CONFIG_SENSORS_ADM1025 is not set
+-# CONFIG_SENSORS_ADM1026 is not set
+-# CONFIG_SENSORS_ADM1029 is not set
+-# CONFIG_SENSORS_ADM1031 is not set
+-# CONFIG_SENSORS_ADM9240 is not set
+-# CONFIG_SENSORS_ADT7470 is not set
+-# CONFIG_SENSORS_ADT7473 is not set
+-# CONFIG_SENSORS_ATXP1 is not set
+-# CONFIG_SENSORS_DS1621 is not set
+-# CONFIG_SENSORS_I5K_AMB is not set
+-# CONFIG_SENSORS_F71805F is not set
+-# CONFIG_SENSORS_F71882FG is not set
+-# CONFIG_SENSORS_F75375S is not set
+-# CONFIG_SENSORS_GL518SM is not set
+-# CONFIG_SENSORS_GL520SM is not set
+-# CONFIG_SENSORS_IT87 is not set
+-# CONFIG_SENSORS_LM63 is not set
+-# CONFIG_SENSORS_LM70 is not set
+-# CONFIG_SENSORS_LM75 is not set
+-# CONFIG_SENSORS_LM77 is not set
+-# CONFIG_SENSORS_LM78 is not set
+-# CONFIG_SENSORS_LM80 is not set
+-# CONFIG_SENSORS_LM83 is not set
+-# CONFIG_SENSORS_LM85 is not set
+-# CONFIG_SENSORS_LM87 is not set
+-# CONFIG_SENSORS_LM90 is not set
+-# CONFIG_SENSORS_LM92 is not set
+-# CONFIG_SENSORS_LM93 is not set
+-# CONFIG_SENSORS_MAX1619 is not set
+-# CONFIG_SENSORS_MAX6650 is not set
+-# CONFIG_SENSORS_PC87360 is not set
+-# CONFIG_SENSORS_PC87427 is not set
+-# CONFIG_SENSORS_SIS5595 is not set
+-# CONFIG_SENSORS_DME1737 is not set
+-# CONFIG_SENSORS_SMSC47M1 is not set
+-# CONFIG_SENSORS_SMSC47M192 is not set
+-# CONFIG_SENSORS_SMSC47B397 is not set
+-# CONFIG_SENSORS_ADS7828 is not set
+-# CONFIG_SENSORS_THMC50 is not set
+-# CONFIG_SENSORS_VIA686A is not set
+-# CONFIG_SENSORS_VT1211 is not set
+-# CONFIG_SENSORS_VT8231 is not set
+-# CONFIG_SENSORS_W83781D is not set
+-# CONFIG_SENSORS_W83791D is not set
+-# CONFIG_SENSORS_W83792D is not set
+-# CONFIG_SENSORS_W83793 is not set
+-# CONFIG_SENSORS_W83L785TS is not set
+-# CONFIG_SENSORS_W83L786NG is not set
+-# CONFIG_SENSORS_W83627HF is not set
+-# CONFIG_SENSORS_W83627EHF is not set
+-# CONFIG_HWMON_DEBUG_CHIP is not set
+-# CONFIG_THERMAL is not set
+-CONFIG_WATCHDOG=y
+-# CONFIG_WATCHDOG_NOWAYOUT is not set
+-
+-#
+-# Watchdog Device Drivers
+-#
+-# CONFIG_SOFT_WATCHDOG is not set
+-CONFIG_83xx_WDT=y
+-
+-#
+-# PCI-based Watchdog Cards
+-#
+-# CONFIG_PCIPCWATCHDOG is not set
+-# CONFIG_WDTPCI is not set
+-
+-#
+-# USB-based Watchdog Cards
+-#
+-# CONFIG_USBPCWATCHDOG is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-CONFIG_DAB=y
+-# CONFIG_USB_DABUSB is not set
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_AGP is not set
+-# CONFIG_DRM is not set
+-# CONFIG_VGASTATE is not set
+-CONFIG_VIDEO_OUTPUT_CONTROL=m
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-CONFIG_HID_SUPPORT=y
+-CONFIG_HID=y
+-# CONFIG_HID_DEBUG is not set
+-# CONFIG_HIDRAW is not set
+-
+-#
+-# USB Input Devices
+-#
+-# CONFIG_USB_HID is not set
+-
+-#
+-# USB HID Boot Protocol drivers
+-#
+-# CONFIG_USB_KBD is not set
+-# CONFIG_USB_MOUSE is not set
+-CONFIG_USB_SUPPORT=y
+-CONFIG_USB_ARCH_HAS_HCD=y
+-CONFIG_USB_ARCH_HAS_OHCI=y
+-CONFIG_USB_ARCH_HAS_EHCI=y
+-CONFIG_USB=y
+-# CONFIG_USB_DEBUG is not set
+-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+-
+-#
+-# Miscellaneous USB options
+-#
+-CONFIG_USB_DEVICEFS=y
+-CONFIG_USB_DEVICE_CLASS=y
+-# CONFIG_USB_DYNAMIC_MINORS is not set
+-# CONFIG_USB_OTG is not set
+-
+-#
+-# USB Host Controller Drivers
+-#
+-CONFIG_USB_EHCI_HCD=y
+-CONFIG_USB_EHCI_ROOT_HUB_TT=y
+-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+-CONFIG_USB_EHCI_FSL=y
+-CONFIG_USB_EHCI_HCD_PPC_OF=y
+-# CONFIG_USB_ISP116X_HCD is not set
+-CONFIG_USB_OHCI_HCD=y
+-CONFIG_USB_OHCI_HCD_PPC_OF=y
+-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+-CONFIG_USB_OHCI_HCD_PCI=y
+-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+-CONFIG_USB_UHCI_HCD=y
+-# CONFIG_USB_SL811_HCD is not set
+-# CONFIG_USB_R8A66597_HCD is not set
+-
+-#
+-# USB Device Class drivers
+-#
+-# CONFIG_USB_ACM is not set
+-# CONFIG_USB_PRINTER is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-
+-#
+-# may also be needed; see USB_STORAGE Help for more information
+-#
+-CONFIG_USB_STORAGE=y
+-# CONFIG_USB_STORAGE_DEBUG is not set
+-# CONFIG_USB_STORAGE_DATAFAB is not set
+-# CONFIG_USB_STORAGE_FREECOM is not set
+-# CONFIG_USB_STORAGE_ISD200 is not set
+-# CONFIG_USB_STORAGE_DPCM is not set
+-# CONFIG_USB_STORAGE_USBAT is not set
+-# CONFIG_USB_STORAGE_SDDR09 is not set
+-# CONFIG_USB_STORAGE_SDDR55 is not set
+-# CONFIG_USB_STORAGE_JUMPSHOT is not set
+-# CONFIG_USB_STORAGE_ALAUDA is not set
+-# CONFIG_USB_STORAGE_KARMA is not set
+-# CONFIG_USB_LIBUSUAL is not set
+-
+-#
+-# USB Imaging devices
+-#
+-# CONFIG_USB_MDC800 is not set
+-# CONFIG_USB_MICROTEK is not set
+-CONFIG_USB_MON=y
+-
+-#
+-# USB port drivers
+-#
+-# CONFIG_USB_SERIAL is not set
+-
+-#
+-# USB Miscellaneous drivers
+-#
+-# CONFIG_USB_EMI62 is not set
+-# CONFIG_USB_EMI26 is not set
+-# CONFIG_USB_ADUTUX is not set
+-# CONFIG_USB_AUERSWALD is not set
+-# CONFIG_USB_RIO500 is not set
+-# CONFIG_USB_LEGOTOWER is not set
+-# CONFIG_USB_LCD is not set
+-# CONFIG_USB_BERRY_CHARGE is not set
+-# CONFIG_USB_LED is not set
+-# CONFIG_USB_CYPRESS_CY7C63 is not set
+-# CONFIG_USB_CYTHERM is not set
+-# CONFIG_USB_PHIDGET is not set
+-# CONFIG_USB_IDMOUSE is not set
+-# CONFIG_USB_FTDI_ELAN is not set
+-# CONFIG_USB_APPLEDISPLAY is not set
+-# CONFIG_USB_SISUSBVGA is not set
+-# CONFIG_USB_LD is not set
+-# CONFIG_USB_TRANCEVIBRATOR is not set
+-# CONFIG_USB_IOWARRIOR is not set
+-# CONFIG_USB_TEST is not set
+-CONFIG_USB_GADGET=y
+-# CONFIG_USB_GADGET_DEBUG is not set
+-# CONFIG_USB_GADGET_DEBUG_FILES is not set
+-CONFIG_USB_GADGET_SELECTED=y
+-# CONFIG_USB_GADGET_AMD5536UDC is not set
+-# CONFIG_USB_GADGET_ATMEL_USBA is not set
+-# CONFIG_USB_GADGET_FSL_USB2 is not set
+-CONFIG_USB_GADGET_NET2280=y
+-CONFIG_USB_NET2280=y
+-# CONFIG_USB_GADGET_PXA2XX is not set
+-# CONFIG_USB_GADGET_M66592 is not set
+-# CONFIG_USB_GADGET_GOKU is not set
+-# CONFIG_USB_GADGET_LH7A40X is not set
+-# CONFIG_USB_GADGET_OMAP is not set
+-# CONFIG_USB_GADGET_S3C2410 is not set
+-# CONFIG_USB_GADGET_AT91 is not set
+-# CONFIG_USB_GADGET_DUMMY_HCD is not set
+-CONFIG_USB_GADGET_DUALSPEED=y
+-# CONFIG_USB_ZERO is not set
+-CONFIG_USB_ETH=y
+-CONFIG_USB_ETH_RNDIS=y
+-# CONFIG_USB_GADGETFS is not set
+-# CONFIG_USB_FILE_STORAGE is not set
+-# CONFIG_USB_G_SERIAL is not set
+-# CONFIG_USB_MIDI_GADGET is not set
+-# CONFIG_USB_G_PRINTER is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_INFINIBAND is not set
+-# CONFIG_EDAC is not set
+-CONFIG_RTC_LIB=y
+-CONFIG_RTC_CLASS=y
+-CONFIG_RTC_HCTOSYS=y
+-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+-# CONFIG_RTC_DEBUG is not set
+-
+-#
+-# RTC interfaces
+-#
+-CONFIG_RTC_INTF_SYSFS=y
+-CONFIG_RTC_INTF_PROC=y
+-CONFIG_RTC_INTF_DEV=y
+-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+-# CONFIG_RTC_DRV_TEST is not set
+-
+-#
+-# I2C RTC drivers
+-#
+-CONFIG_RTC_DRV_DS1307=y
+-# CONFIG_RTC_DRV_DS1374 is not set
+-# CONFIG_RTC_DRV_DS1672 is not set
+-# CONFIG_RTC_DRV_MAX6900 is not set
+-# CONFIG_RTC_DRV_RS5C372 is not set
+-# CONFIG_RTC_DRV_ISL1208 is not set
+-# CONFIG_RTC_DRV_X1205 is not set
+-# CONFIG_RTC_DRV_PCF8563 is not set
+-# CONFIG_RTC_DRV_PCF8583 is not set
+-# CONFIG_RTC_DRV_M41T80 is not set
+-# CONFIG_RTC_DRV_S35390A is not set
+-
+-#
+-# SPI RTC drivers
+-#
+-# CONFIG_RTC_DRV_MAX6902 is not set
+-# CONFIG_RTC_DRV_R9701 is not set
+-# CONFIG_RTC_DRV_RS5C348 is not set
+-
+-#
+-# Platform RTC drivers
+-#
+-# CONFIG_RTC_DRV_CMOS is not set
+-# CONFIG_RTC_DRV_DS1511 is not set
+-# CONFIG_RTC_DRV_DS1553 is not set
+-# CONFIG_RTC_DRV_DS1742 is not set
+-# CONFIG_RTC_DRV_STK17TA8 is not set
+-# CONFIG_RTC_DRV_M48T86 is not set
+-# CONFIG_RTC_DRV_M48T59 is not set
+-# CONFIG_RTC_DRV_V3020 is not set
+-
+-#
+-# on-CPU RTC drivers
+-#
+-# CONFIG_DMADEVICES is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=y
+-CONFIG_EXT3_FS_XATTR=y
+-# CONFIG_EXT3_FS_POSIX_ACL is not set
+-# CONFIG_EXT3_FS_SECURITY is not set
+-# CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=y
+-CONFIG_FS_MBCACHE=y
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-# CONFIG_MSDOS_FS is not set
+-# CONFIG_VFAT_FS is not set
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-CONFIG_JFFS2_FS=y
+-CONFIG_JFFS2_FS_DEBUG=0
+-CONFIG_JFFS2_FS_WRITEBUFFER=y
+-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+-# CONFIG_JFFS2_SUMMARY is not set
+-# CONFIG_JFFS2_FS_XATTR is not set
+-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+-CONFIG_JFFS2_ZLIB=y
+-# CONFIG_JFFS2_LZO is not set
+-CONFIG_JFFS2_RTIME=y
+-# CONFIG_JFFS2_RUBIN is not set
+-# CONFIG_CRAMFS is not set
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-CONFIG_NFS_V3=y
+-# CONFIG_NFS_V3_ACL is not set
+-CONFIG_NFS_V4=y
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_LOCKD_V4=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-CONFIG_SUNRPC_GSS=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-CONFIG_RPCSEC_GSS_KRB5=y
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-CONFIG_PARTITION_ADVANCED=y
+-# CONFIG_ACORN_PARTITION is not set
+-# CONFIG_OSF_PARTITION is not set
+-# CONFIG_AMIGA_PARTITION is not set
+-# CONFIG_ATARI_PARTITION is not set
+-# CONFIG_MAC_PARTITION is not set
+-CONFIG_MSDOS_PARTITION=y
+-# CONFIG_BSD_DISKLABEL is not set
+-# CONFIG_MINIX_SUBPARTITION is not set
+-# CONFIG_SOLARIS_X86_PARTITION is not set
+-# CONFIG_UNIXWARE_DISKLABEL is not set
+-# CONFIG_LDM_PARTITION is not set
+-# CONFIG_SGI_PARTITION is not set
+-# CONFIG_ULTRIX_PARTITION is not set
+-# CONFIG_SUN_PARTITION is not set
+-# CONFIG_KARMA_PARTITION is not set
+-# CONFIG_EFI_PARTITION is not set
+-# CONFIG_SYSV68_PARTITION is not set
+-# CONFIG_NLS is not set
+-# CONFIG_DLM is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_ZLIB_INFLATE=y
+-CONFIG_ZLIB_DEFLATE=y
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-# CONFIG_MAGIC_SYSRQ is not set
+-# CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
+-# CONFIG_HEADERS_CHECK is not set
+-CONFIG_DEBUG_KERNEL=y
+-# CONFIG_DEBUG_SHIRQ is not set
+-CONFIG_DETECT_SOFTLOCKUP=y
+-CONFIG_SCHED_DEBUG=y
+-# CONFIG_SCHEDSTATS is not set
+-# CONFIG_TIMER_STATS is not set
+-# CONFIG_SLUB_DEBUG_ON is not set
+-# CONFIG_SLUB_STATS is not set
+-# CONFIG_DEBUG_RT_MUTEXES is not set
+-# CONFIG_RT_MUTEX_TESTER is not set
+-# CONFIG_DEBUG_SPINLOCK is not set
+-# CONFIG_DEBUG_MUTEXES is not set
+-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+-# CONFIG_DEBUG_KOBJECT is not set
+-# CONFIG_DEBUG_BUGVERBOSE is not set
+-# CONFIG_DEBUG_INFO is not set
+-# CONFIG_DEBUG_VM is not set
+-# CONFIG_DEBUG_LIST is not set
+-# CONFIG_DEBUG_SG is not set
+-# CONFIG_BOOT_PRINTK_DELAY is not set
+-# CONFIG_RCU_TORTURE_TEST is not set
+-# CONFIG_BACKTRACE_SELF_TEST is not set
+-# CONFIG_FAULT_INJECTION is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_DEBUG_STACKOVERFLOW is not set
+-# CONFIG_DEBUG_STACK_USAGE is not set
+-# CONFIG_DEBUG_PAGEALLOC is not set
+-# CONFIG_DEBUGGER is not set
+-# CONFIG_BDI_SWITCH is not set
+-# CONFIG_PPC_EARLY_DEBUG is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_BLKCIPHER=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-CONFIG_CRYPTO_MANAGER=y
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-CONFIG_CRYPTO_MD5=y
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-# CONFIG_CRYPTO_ECB is not set
+-CONFIG_CRYPTO_CBC=y
+-CONFIG_CRYPTO_PCBC=m
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-CONFIG_CRYPTO_DES=y
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_TEST is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+-# CONFIG_PPC_CLOCK is not set
+--- a/arch/powerpc/configs/mpc832x_mds_defconfig
++++ /dev/null
+@@ -1,1081 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc7
+-# Mon Mar 31 11:36:51 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-CONFIG_6xx=y
+-# CONFIG_PPC_85xx is not set
+-# CONFIG_PPC_8xx is not set
+-# CONFIG_40x is not set
+-# CONFIG_44x is not set
+-# CONFIG_E200 is not set
+-CONFIG_PPC_FPU=y
+-# CONFIG_FSL_EMB_PERFMON is not set
+-CONFIG_PPC_STD_MMU=y
+-CONFIG_PPC_STD_MMU_32=y
+-# CONFIG_PPC_MM_SLICES is not set
+-# CONFIG_SMP is not set
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-CONFIG_DEFAULT_UIMAGE=y
+-# CONFIG_PPC_DCR_NATIVE is not set
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-# CONFIG_POSIX_MQUEUE is not set
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-# CONFIG_FAIR_GROUP_SCHED is not set
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-CONFIG_SYSFS_DEPRECATED_V2=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-# CONFIG_KALLSYMS is not set
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-# CONFIG_EPOLL is not set
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLUB_DEBUG=y
+-# CONFIG_SLAB is not set
+-CONFIG_SLUB=y
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_HAVE_KRETPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-CONFIG_MODULES=y
+-CONFIG_MODULE_UNLOAD=y
+-# CONFIG_MODULE_FORCE_UNLOAD is not set
+-# CONFIG_MODVERSIONS is not set
+-# CONFIG_MODULE_SRCVERSION_ALL is not set
+-# CONFIG_KMOD is not set
+-CONFIG_BLOCK=y
+-# CONFIG_LBD is not set
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MULTIPLATFORM is not set
+-# CONFIG_PPC_82xx is not set
+-CONFIG_PPC_83xx=y
+-# CONFIG_PPC_86xx is not set
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-CONFIG_MPC83xx=y
+-# CONFIG_MPC831x_RDB is not set
+-CONFIG_MPC832x_MDS=y
+-# CONFIG_MPC832x_RDB is not set
+-# CONFIG_MPC834x_MDS is not set
+-# CONFIG_MPC834x_ITX is not set
+-# CONFIG_MPC836x_MDS is not set
+-# CONFIG_MPC837x_MDS is not set
+-# CONFIG_MPC837x_RDB is not set
+-# CONFIG_SBC834x is not set
+-CONFIG_PPC_MPC832x=y
+-CONFIG_IPIC=y
+-# CONFIG_MPIC is not set
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-CONFIG_QUICC_ENGINE=y
+-# CONFIG_FSL_ULI1575 is not set
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-CONFIG_TICK_ONESHOT=y
+-CONFIG_NO_HZ=y
+-CONFIG_HIGH_RES_TIMERS=y
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_BINFMT_ELF=y
+-# CONFIG_BINFMT_MISC is not set
+-CONFIG_MATH_EMULATION=y
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_RESOURCES_64BIT is not set
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-CONFIG_PROC_DEVICETREE=y
+-# CONFIG_CMDLINE_BOOL is not set
+-# CONFIG_PM is not set
+-CONFIG_SECCOMP=y
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_GENERIC_ISA_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_FSL_SOC=y
+-CONFIG_PCI=y
+-CONFIG_PCI_DOMAINS=y
+-CONFIG_PCI_SYSCALL=y
+-# CONFIG_PCIEPORTBUS is not set
+-CONFIG_ARCH_SUPPORTS_MSI=y
+-# CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
+-# CONFIG_PCCARD is not set
+-# CONFIG_HOTPLUG_PCI is not set
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_BOOT_LOAD=0x00800000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-CONFIG_XFRM=y
+-# CONFIG_XFRM_USER is not set
+-# CONFIG_XFRM_SUB_POLICY is not set
+-# CONFIG_XFRM_MIGRATE is not set
+-# CONFIG_XFRM_STATISTICS is not set
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-CONFIG_IP_MULTICAST=y
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_IP_MROUTE is not set
+-# CONFIG_ARPD is not set
+-CONFIG_SYN_COOKIES=y
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-CONFIG_INET_XFRM_MODE_TRANSPORT=y
+-CONFIG_INET_XFRM_MODE_TUNNEL=y
+-CONFIG_INET_XFRM_MODE_BEET=y
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-# CONFIG_FW_LOADER is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-# CONFIG_CONNECTOR is not set
+-# CONFIG_MTD is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_CPQ_DA is not set
+-# CONFIG_BLK_CPQ_CISS_DA is not set
+-# CONFIG_BLK_DEV_DAC960 is not set
+-# CONFIG_BLK_DEV_UMEM is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-CONFIG_BLK_DEV_LOOP=y
+-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-# CONFIG_BLK_DEV_SX8 is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=32768
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_PHANTOM is not set
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_SGI_IOC4 is not set
+-# CONFIG_TIFM_CORE is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-# CONFIG_IDE is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-CONFIG_SCSI=y
+-CONFIG_SCSI_DMA=y
+-# CONFIG_SCSI_TGT is not set
+-# CONFIG_SCSI_NETLINK is not set
+-CONFIG_SCSI_PROC_FS=y
+-
+-#
+-# SCSI support type (disk, tape, CD-ROM)
+-#
+-# CONFIG_BLK_DEV_SD is not set
+-# CONFIG_CHR_DEV_ST is not set
+-# CONFIG_CHR_DEV_OSST is not set
+-# CONFIG_BLK_DEV_SR is not set
+-# CONFIG_CHR_DEV_SG is not set
+-# CONFIG_CHR_DEV_SCH is not set
+-
+-#
+-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+-#
+-# CONFIG_SCSI_MULTI_LUN is not set
+-# CONFIG_SCSI_CONSTANTS is not set
+-# CONFIG_SCSI_LOGGING is not set
+-# CONFIG_SCSI_SCAN_ASYNC is not set
+-CONFIG_SCSI_WAIT_SCAN=m
+-
+-#
+-# SCSI Transports
+-#
+-# CONFIG_SCSI_SPI_ATTRS is not set
+-# CONFIG_SCSI_FC_ATTRS is not set
+-# CONFIG_SCSI_ISCSI_ATTRS is not set
+-# CONFIG_SCSI_SAS_LIBSAS is not set
+-# CONFIG_SCSI_SRP_ATTRS is not set
+-CONFIG_SCSI_LOWLEVEL=y
+-# CONFIG_ISCSI_TCP is not set
+-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+-# CONFIG_SCSI_3W_9XXX is not set
+-# CONFIG_SCSI_ACARD is not set
+-# CONFIG_SCSI_AACRAID is not set
+-# CONFIG_SCSI_AIC7XXX is not set
+-# CONFIG_SCSI_AIC7XXX_OLD is not set
+-# CONFIG_SCSI_AIC79XX is not set
+-# CONFIG_SCSI_AIC94XX is not set
+-# CONFIG_SCSI_DPT_I2O is not set
+-# CONFIG_SCSI_ADVANSYS is not set
+-# CONFIG_SCSI_ARCMSR is not set
+-# CONFIG_MEGARAID_NEWGEN is not set
+-# CONFIG_MEGARAID_LEGACY is not set
+-# CONFIG_MEGARAID_SAS is not set
+-# CONFIG_SCSI_HPTIOP is not set
+-# CONFIG_SCSI_BUSLOGIC is not set
+-# CONFIG_SCSI_DMX3191D is not set
+-# CONFIG_SCSI_EATA is not set
+-# CONFIG_SCSI_FUTURE_DOMAIN is not set
+-# CONFIG_SCSI_GDTH is not set
+-# CONFIG_SCSI_IPS is not set
+-# CONFIG_SCSI_INITIO is not set
+-# CONFIG_SCSI_INIA100 is not set
+-# CONFIG_SCSI_MVSAS is not set
+-# CONFIG_SCSI_STEX is not set
+-# CONFIG_SCSI_SYM53C8XX_2 is not set
+-# CONFIG_SCSI_QLOGIC_1280 is not set
+-# CONFIG_SCSI_QLA_FC is not set
+-# CONFIG_SCSI_QLA_ISCSI is not set
+-# CONFIG_SCSI_LPFC is not set
+-# CONFIG_SCSI_DC395x is not set
+-# CONFIG_SCSI_DC390T is not set
+-# CONFIG_SCSI_NSP32 is not set
+-# CONFIG_SCSI_DEBUG is not set
+-# CONFIG_SCSI_SRP is not set
+-# CONFIG_ATA is not set
+-# CONFIG_MD is not set
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-# CONFIG_FIREWIRE is not set
+-# CONFIG_IEEE1394 is not set
+-# CONFIG_I2O is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_ARCNET is not set
+-CONFIG_PHYLIB=y
+-
+-#
+-# MII PHY device drivers
+-#
+-# CONFIG_MARVELL_PHY is not set
+-CONFIG_DAVICOM_PHY=y
+-# CONFIG_QSEMI_PHY is not set
+-# CONFIG_LXT_PHY is not set
+-# CONFIG_CICADA_PHY is not set
+-# CONFIG_VITESSE_PHY is not set
+-# CONFIG_SMSC_PHY is not set
+-# CONFIG_BROADCOM_PHY is not set
+-# CONFIG_ICPLUS_PHY is not set
+-# CONFIG_REALTEK_PHY is not set
+-# CONFIG_FIXED_PHY is not set
+-# CONFIG_MDIO_BITBANG is not set
+-CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
+-# CONFIG_HAPPYMEAL is not set
+-# CONFIG_SUNGEM is not set
+-# CONFIG_CASSINI is not set
+-# CONFIG_NET_VENDOR_3COM is not set
+-# CONFIG_NET_TULIP is not set
+-# CONFIG_HP100 is not set
+-# CONFIG_IBM_NEW_EMAC_ZMII is not set
+-# CONFIG_IBM_NEW_EMAC_RGMII is not set
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-# CONFIG_NET_PCI is not set
+-# CONFIG_B44 is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_ACENIC is not set
+-# CONFIG_DL2K is not set
+-# CONFIG_E1000 is not set
+-# CONFIG_E1000E is not set
+-# CONFIG_E1000E_ENABLED is not set
+-# CONFIG_IP1000 is not set
+-# CONFIG_IGB is not set
+-# CONFIG_NS83820 is not set
+-# CONFIG_HAMACHI is not set
+-# CONFIG_YELLOWFIN is not set
+-# CONFIG_R8169 is not set
+-# CONFIG_SIS190 is not set
+-# CONFIG_SKGE is not set
+-# CONFIG_SKY2 is not set
+-# CONFIG_SK98LIN is not set
+-# CONFIG_VIA_VELOCITY is not set
+-# CONFIG_TIGON3 is not set
+-# CONFIG_BNX2 is not set
+-# CONFIG_GIANFAR is not set
+-CONFIG_UCC_GETH=y
+-# CONFIG_UGETH_NAPI is not set
+-# CONFIG_UGETH_MAGIC_PACKET is not set
+-# CONFIG_UGETH_FILTERING is not set
+-# CONFIG_UGETH_TX_ON_DEMAND is not set
+-# CONFIG_QLA3XXX is not set
+-# CONFIG_ATL1 is not set
+-CONFIG_NETDEV_10000=y
+-# CONFIG_CHELSIO_T1 is not set
+-# CONFIG_CHELSIO_T3 is not set
+-# CONFIG_IXGBE is not set
+-# CONFIG_IXGB is not set
+-# CONFIG_S2IO is not set
+-# CONFIG_MYRI10GE is not set
+-# CONFIG_NETXEN_NIC is not set
+-# CONFIG_NIU is not set
+-# CONFIG_MLX4_CORE is not set
+-# CONFIG_TEHUTI is not set
+-# CONFIG_BNX2X is not set
+-# CONFIG_TR is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-# CONFIG_WAN is not set
+-# CONFIG_FDDI is not set
+-# CONFIG_HIPPI is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NET_FC is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-CONFIG_INPUT=y
+-# CONFIG_INPUT_FF_MEMLESS is not set
+-# CONFIG_INPUT_POLLDEV is not set
+-
+-#
+-# Userland interfaces
+-#
+-# CONFIG_INPUT_MOUSEDEV is not set
+-# CONFIG_INPUT_JOYDEV is not set
+-# CONFIG_INPUT_EVDEV is not set
+-# CONFIG_INPUT_EVBUG is not set
+-
+-#
+-# Input Device Drivers
+-#
+-# CONFIG_INPUT_KEYBOARD is not set
+-# CONFIG_INPUT_MOUSE is not set
+-# CONFIG_INPUT_JOYSTICK is not set
+-# CONFIG_INPUT_TABLET is not set
+-# CONFIG_INPUT_TOUCHSCREEN is not set
+-# CONFIG_INPUT_MISC is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-# CONFIG_NOZOMI is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-CONFIG_SERIAL_8250_PCI=y
+-CONFIG_SERIAL_8250_NR_UARTS=4
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-# CONFIG_SERIAL_8250_EXTENDED is not set
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_JSM is not set
+-# CONFIG_SERIAL_OF_PLATFORM is not set
+-# CONFIG_SERIAL_QE is not set
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-CONFIG_HW_RANDOM=y
+-# CONFIG_NVRAM is not set
+-# CONFIG_GEN_RTC is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_APPLICOM is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_DEVPORT=y
+-CONFIG_I2C=y
+-CONFIG_I2C_BOARDINFO=y
+-CONFIG_I2C_CHARDEV=y
+-
+-#
+-# I2C Algorithms
+-#
+-# CONFIG_I2C_ALGOBIT is not set
+-# CONFIG_I2C_ALGOPCF is not set
+-# CONFIG_I2C_ALGOPCA is not set
+-
+-#
+-# I2C Hardware Bus support
+-#
+-# CONFIG_I2C_ALI1535 is not set
+-# CONFIG_I2C_ALI1563 is not set
+-# CONFIG_I2C_ALI15X3 is not set
+-# CONFIG_I2C_AMD756 is not set
+-# CONFIG_I2C_AMD8111 is not set
+-# CONFIG_I2C_I801 is not set
+-# CONFIG_I2C_I810 is not set
+-# CONFIG_I2C_PIIX4 is not set
+-CONFIG_I2C_MPC=y
+-# CONFIG_I2C_NFORCE2 is not set
+-# CONFIG_I2C_OCORES is not set
+-# CONFIG_I2C_PARPORT_LIGHT is not set
+-# CONFIG_I2C_PROSAVAGE is not set
+-# CONFIG_I2C_SAVAGE4 is not set
+-# CONFIG_I2C_SIMTEC is not set
+-# CONFIG_I2C_SIS5595 is not set
+-# CONFIG_I2C_SIS630 is not set
+-# CONFIG_I2C_SIS96X is not set
+-# CONFIG_I2C_TAOS_EVM is not set
+-# CONFIG_I2C_STUB is not set
+-# CONFIG_I2C_VIA is not set
+-# CONFIG_I2C_VIAPRO is not set
+-# CONFIG_I2C_VOODOO3 is not set
+-
+-#
+-# Miscellaneous I2C Chip support
+-#
+-# CONFIG_DS1682 is not set
+-# CONFIG_SENSORS_EEPROM is not set
+-# CONFIG_SENSORS_PCF8574 is not set
+-# CONFIG_PCF8575 is not set
+-# CONFIG_SENSORS_PCF8591 is not set
+-# CONFIG_TPS65010 is not set
+-# CONFIG_SENSORS_MAX6875 is not set
+-# CONFIG_SENSORS_TSL2550 is not set
+-# CONFIG_I2C_DEBUG_CORE is not set
+-# CONFIG_I2C_DEBUG_ALGO is not set
+-# CONFIG_I2C_DEBUG_BUS is not set
+-# CONFIG_I2C_DEBUG_CHIP is not set
+-
+-#
+-# SPI support
+-#
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-CONFIG_HWMON=y
+-# CONFIG_HWMON_VID is not set
+-# CONFIG_SENSORS_AD7418 is not set
+-# CONFIG_SENSORS_ADM1021 is not set
+-# CONFIG_SENSORS_ADM1025 is not set
+-# CONFIG_SENSORS_ADM1026 is not set
+-# CONFIG_SENSORS_ADM1029 is not set
+-# CONFIG_SENSORS_ADM1031 is not set
+-# CONFIG_SENSORS_ADM9240 is not set
+-# CONFIG_SENSORS_ADT7470 is not set
+-# CONFIG_SENSORS_ADT7473 is not set
+-# CONFIG_SENSORS_ATXP1 is not set
+-# CONFIG_SENSORS_DS1621 is not set
+-# CONFIG_SENSORS_I5K_AMB is not set
+-# CONFIG_SENSORS_F71805F is not set
+-# CONFIG_SENSORS_F71882FG is not set
+-# CONFIG_SENSORS_F75375S is not set
+-# CONFIG_SENSORS_GL518SM is not set
+-# CONFIG_SENSORS_GL520SM is not set
+-# CONFIG_SENSORS_IT87 is not set
+-# CONFIG_SENSORS_LM63 is not set
+-# CONFIG_SENSORS_LM75 is not set
+-# CONFIG_SENSORS_LM77 is not set
+-# CONFIG_SENSORS_LM78 is not set
+-# CONFIG_SENSORS_LM80 is not set
+-# CONFIG_SENSORS_LM83 is not set
+-# CONFIG_SENSORS_LM85 is not set
+-# CONFIG_SENSORS_LM87 is not set
+-# CONFIG_SENSORS_LM90 is not set
+-# CONFIG_SENSORS_LM92 is not set
+-# CONFIG_SENSORS_LM93 is not set
+-# CONFIG_SENSORS_MAX1619 is not set
+-# CONFIG_SENSORS_MAX6650 is not set
+-# CONFIG_SENSORS_PC87360 is not set
+-# CONFIG_SENSORS_PC87427 is not set
+-# CONFIG_SENSORS_SIS5595 is not set
+-# CONFIG_SENSORS_DME1737 is not set
+-# CONFIG_SENSORS_SMSC47M1 is not set
+-# CONFIG_SENSORS_SMSC47M192 is not set
+-# CONFIG_SENSORS_SMSC47B397 is not set
+-# CONFIG_SENSORS_ADS7828 is not set
+-# CONFIG_SENSORS_THMC50 is not set
+-# CONFIG_SENSORS_VIA686A is not set
+-# CONFIG_SENSORS_VT1211 is not set
+-# CONFIG_SENSORS_VT8231 is not set
+-# CONFIG_SENSORS_W83781D is not set
+-# CONFIG_SENSORS_W83791D is not set
+-# CONFIG_SENSORS_W83792D is not set
+-# CONFIG_SENSORS_W83793 is not set
+-# CONFIG_SENSORS_W83L785TS is not set
+-# CONFIG_SENSORS_W83L786NG is not set
+-# CONFIG_SENSORS_W83627HF is not set
+-# CONFIG_SENSORS_W83627EHF is not set
+-# CONFIG_HWMON_DEBUG_CHIP is not set
+-# CONFIG_THERMAL is not set
+-CONFIG_WATCHDOG=y
+-# CONFIG_WATCHDOG_NOWAYOUT is not set
+-
+-#
+-# Watchdog Device Drivers
+-#
+-# CONFIG_SOFT_WATCHDOG is not set
+-CONFIG_83xx_WDT=y
+-
+-#
+-# PCI-based Watchdog Cards
+-#
+-# CONFIG_PCIPCWATCHDOG is not set
+-# CONFIG_WDTPCI is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-CONFIG_DAB=y
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_AGP is not set
+-# CONFIG_DRM is not set
+-# CONFIG_VGASTATE is not set
+-CONFIG_VIDEO_OUTPUT_CONTROL=m
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-CONFIG_HID_SUPPORT=y
+-CONFIG_HID=y
+-# CONFIG_HID_DEBUG is not set
+-# CONFIG_HIDRAW is not set
+-CONFIG_USB_SUPPORT=y
+-CONFIG_USB_ARCH_HAS_HCD=y
+-CONFIG_USB_ARCH_HAS_OHCI=y
+-CONFIG_USB_ARCH_HAS_EHCI=y
+-# CONFIG_USB is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_INFINIBAND is not set
+-# CONFIG_EDAC is not set
+-CONFIG_RTC_LIB=y
+-CONFIG_RTC_CLASS=y
+-CONFIG_RTC_HCTOSYS=y
+-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+-# CONFIG_RTC_DEBUG is not set
+-
+-#
+-# RTC interfaces
+-#
+-CONFIG_RTC_INTF_SYSFS=y
+-CONFIG_RTC_INTF_PROC=y
+-CONFIG_RTC_INTF_DEV=y
+-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+-# CONFIG_RTC_DRV_TEST is not set
+-
+-#
+-# I2C RTC drivers
+-#
+-# CONFIG_RTC_DRV_DS1307 is not set
+-CONFIG_RTC_DRV_DS1374=y
+-# CONFIG_RTC_DRV_DS1672 is not set
+-# CONFIG_RTC_DRV_MAX6900 is not set
+-# CONFIG_RTC_DRV_RS5C372 is not set
+-# CONFIG_RTC_DRV_ISL1208 is not set
+-# CONFIG_RTC_DRV_X1205 is not set
+-# CONFIG_RTC_DRV_PCF8563 is not set
+-# CONFIG_RTC_DRV_PCF8583 is not set
+-# CONFIG_RTC_DRV_M41T80 is not set
+-# CONFIG_RTC_DRV_S35390A is not set
+-
+-#
+-# SPI RTC drivers
+-#
+-
+-#
+-# Platform RTC drivers
+-#
+-# CONFIG_RTC_DRV_CMOS is not set
+-# CONFIG_RTC_DRV_DS1511 is not set
+-# CONFIG_RTC_DRV_DS1553 is not set
+-# CONFIG_RTC_DRV_DS1742 is not set
+-# CONFIG_RTC_DRV_STK17TA8 is not set
+-# CONFIG_RTC_DRV_M48T86 is not set
+-# CONFIG_RTC_DRV_M48T59 is not set
+-# CONFIG_RTC_DRV_V3020 is not set
+-
+-#
+-# on-CPU RTC drivers
+-#
+-# CONFIG_DMADEVICES is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=y
+-CONFIG_EXT3_FS_XATTR=y
+-# CONFIG_EXT3_FS_POSIX_ACL is not set
+-# CONFIG_EXT3_FS_SECURITY is not set
+-# CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=y
+-CONFIG_FS_MBCACHE=y
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-# CONFIG_MSDOS_FS is not set
+-# CONFIG_VFAT_FS is not set
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-# CONFIG_CRAMFS is not set
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-CONFIG_NFS_V3=y
+-# CONFIG_NFS_V3_ACL is not set
+-CONFIG_NFS_V4=y
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_LOCKD_V4=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-CONFIG_SUNRPC_GSS=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-CONFIG_RPCSEC_GSS_KRB5=y
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-CONFIG_PARTITION_ADVANCED=y
+-# CONFIG_ACORN_PARTITION is not set
+-# CONFIG_OSF_PARTITION is not set
+-# CONFIG_AMIGA_PARTITION is not set
+-# CONFIG_ATARI_PARTITION is not set
+-# CONFIG_MAC_PARTITION is not set
+-# CONFIG_MSDOS_PARTITION is not set
+-# CONFIG_LDM_PARTITION is not set
+-# CONFIG_SGI_PARTITION is not set
+-# CONFIG_ULTRIX_PARTITION is not set
+-# CONFIG_SUN_PARTITION is not set
+-# CONFIG_KARMA_PARTITION is not set
+-# CONFIG_EFI_PARTITION is not set
+-# CONFIG_SYSV68_PARTITION is not set
+-# CONFIG_NLS is not set
+-# CONFIG_DLM is not set
+-CONFIG_UCC_FAST=y
+-CONFIG_UCC=y
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-# CONFIG_MAGIC_SYSRQ is not set
+-# CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
+-# CONFIG_HEADERS_CHECK is not set
+-# CONFIG_DEBUG_KERNEL is not set
+-# CONFIG_SLUB_DEBUG_ON is not set
+-# CONFIG_SLUB_STATS is not set
+-# CONFIG_DEBUG_BUGVERBOSE is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_PPC_EARLY_DEBUG is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_BLKCIPHER=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-CONFIG_CRYPTO_MANAGER=y
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-CONFIG_CRYPTO_MD5=y
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-CONFIG_CRYPTO_ECB=m
+-CONFIG_CRYPTO_CBC=y
+-CONFIG_CRYPTO_PCBC=m
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-CONFIG_CRYPTO_DES=y
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_TEST is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+-# CONFIG_PPC_CLOCK is not set
+-CONFIG_PPC_LIB_RHEAP=y
+--- a/arch/powerpc/configs/mpc832x_rdb_defconfig
++++ /dev/null
+@@ -1,1233 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc6
+-# Mon Mar 24 08:48:16 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-CONFIG_6xx=y
+-# CONFIG_PPC_85xx is not set
+-# CONFIG_PPC_8xx is not set
+-# CONFIG_40x is not set
+-# CONFIG_44x is not set
+-# CONFIG_E200 is not set
+-CONFIG_PPC_FPU=y
+-# CONFIG_FSL_EMB_PERFMON is not set
+-CONFIG_PPC_STD_MMU=y
+-CONFIG_PPC_STD_MMU_32=y
+-# CONFIG_PPC_MM_SLICES is not set
+-# CONFIG_SMP is not set
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-CONFIG_DEFAULT_UIMAGE=y
+-# CONFIG_PPC_DCR_NATIVE is not set
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-# CONFIG_POSIX_MQUEUE is not set
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-# CONFIG_FAIR_GROUP_SCHED is not set
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-CONFIG_SYSFS_DEPRECATED_V2=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-# CONFIG_KALLSYMS is not set
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-# CONFIG_EPOLL is not set
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLUB_DEBUG=y
+-# CONFIG_SLAB is not set
+-CONFIG_SLUB=y
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_HAVE_KRETPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-CONFIG_MODULES=y
+-CONFIG_MODULE_UNLOAD=y
+-# CONFIG_MODULE_FORCE_UNLOAD is not set
+-# CONFIG_MODVERSIONS is not set
+-# CONFIG_MODULE_SRCVERSION_ALL is not set
+-# CONFIG_KMOD is not set
+-CONFIG_BLOCK=y
+-# CONFIG_LBD is not set
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MULTIPLATFORM is not set
+-# CONFIG_PPC_82xx is not set
+-CONFIG_PPC_83xx=y
+-# CONFIG_PPC_86xx is not set
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-CONFIG_MPC83xx=y
+-# CONFIG_MPC831x_RDB is not set
+-# CONFIG_MPC832x_MDS is not set
+-CONFIG_MPC832x_RDB=y
+-# CONFIG_MPC834x_MDS is not set
+-# CONFIG_MPC834x_ITX is not set
+-# CONFIG_MPC836x_MDS is not set
+-# CONFIG_MPC837x_MDS is not set
+-# CONFIG_MPC837x_RDB is not set
+-# CONFIG_SBC834x is not set
+-CONFIG_PPC_MPC832x=y
+-CONFIG_IPIC=y
+-# CONFIG_MPIC is not set
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-CONFIG_QUICC_ENGINE=y
+-# CONFIG_FSL_ULI1575 is not set
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-CONFIG_TICK_ONESHOT=y
+-CONFIG_NO_HZ=y
+-CONFIG_HIGH_RES_TIMERS=y
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_BINFMT_ELF=y
+-# CONFIG_BINFMT_MISC is not set
+-CONFIG_MATH_EMULATION=y
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_RESOURCES_64BIT is not set
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-CONFIG_PROC_DEVICETREE=y
+-# CONFIG_CMDLINE_BOOL is not set
+-# CONFIG_PM is not set
+-CONFIG_SECCOMP=y
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_GENERIC_ISA_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_FSL_SOC=y
+-CONFIG_PCI=y
+-CONFIG_PCI_DOMAINS=y
+-CONFIG_PCI_SYSCALL=y
+-# CONFIG_PCIEPORTBUS is not set
+-CONFIG_ARCH_SUPPORTS_MSI=y
+-# CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
+-# CONFIG_PCCARD is not set
+-# CONFIG_HOTPLUG_PCI is not set
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_BOOT_LOAD=0x00800000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-CONFIG_XFRM=y
+-# CONFIG_XFRM_USER is not set
+-# CONFIG_XFRM_SUB_POLICY is not set
+-# CONFIG_XFRM_MIGRATE is not set
+-# CONFIG_XFRM_STATISTICS is not set
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-CONFIG_IP_MULTICAST=y
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_IP_MROUTE is not set
+-# CONFIG_ARPD is not set
+-CONFIG_SYN_COOKIES=y
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-CONFIG_INET_XFRM_MODE_TRANSPORT=y
+-CONFIG_INET_XFRM_MODE_TUNNEL=y
+-CONFIG_INET_XFRM_MODE_BEET=y
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-# CONFIG_FW_LOADER is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-# CONFIG_CONNECTOR is not set
+-# CONFIG_MTD is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_CPQ_DA is not set
+-# CONFIG_BLK_CPQ_CISS_DA is not set
+-# CONFIG_BLK_DEV_DAC960 is not set
+-# CONFIG_BLK_DEV_UMEM is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-CONFIG_BLK_DEV_LOOP=y
+-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-# CONFIG_BLK_DEV_SX8 is not set
+-# CONFIG_BLK_DEV_UB is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=32768
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_PHANTOM is not set
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_SGI_IOC4 is not set
+-# CONFIG_TIFM_CORE is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-# CONFIG_IDE is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-CONFIG_SCSI=y
+-CONFIG_SCSI_DMA=y
+-# CONFIG_SCSI_TGT is not set
+-# CONFIG_SCSI_NETLINK is not set
+-CONFIG_SCSI_PROC_FS=y
+-
+-#
+-# SCSI support type (disk, tape, CD-ROM)
+-#
+-CONFIG_BLK_DEV_SD=y
+-# CONFIG_CHR_DEV_ST is not set
+-# CONFIG_CHR_DEV_OSST is not set
+-# CONFIG_BLK_DEV_SR is not set
+-# CONFIG_CHR_DEV_SG is not set
+-# CONFIG_CHR_DEV_SCH is not set
+-
+-#
+-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+-#
+-# CONFIG_SCSI_MULTI_LUN is not set
+-# CONFIG_SCSI_CONSTANTS is not set
+-# CONFIG_SCSI_LOGGING is not set
+-# CONFIG_SCSI_SCAN_ASYNC is not set
+-CONFIG_SCSI_WAIT_SCAN=m
+-
+-#
+-# SCSI Transports
+-#
+-# CONFIG_SCSI_SPI_ATTRS is not set
+-# CONFIG_SCSI_FC_ATTRS is not set
+-# CONFIG_SCSI_ISCSI_ATTRS is not set
+-# CONFIG_SCSI_SAS_LIBSAS is not set
+-# CONFIG_SCSI_SRP_ATTRS is not set
+-CONFIG_SCSI_LOWLEVEL=y
+-# CONFIG_ISCSI_TCP is not set
+-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+-# CONFIG_SCSI_3W_9XXX is not set
+-# CONFIG_SCSI_ACARD is not set
+-# CONFIG_SCSI_AACRAID is not set
+-# CONFIG_SCSI_AIC7XXX is not set
+-# CONFIG_SCSI_AIC7XXX_OLD is not set
+-# CONFIG_SCSI_AIC79XX is not set
+-# CONFIG_SCSI_AIC94XX is not set
+-# CONFIG_SCSI_DPT_I2O is not set
+-# CONFIG_SCSI_ADVANSYS is not set
+-# CONFIG_SCSI_ARCMSR is not set
+-# CONFIG_MEGARAID_NEWGEN is not set
+-# CONFIG_MEGARAID_LEGACY is not set
+-# CONFIG_MEGARAID_SAS is not set
+-# CONFIG_SCSI_HPTIOP is not set
+-# CONFIG_SCSI_BUSLOGIC is not set
+-# CONFIG_SCSI_DMX3191D is not set
+-# CONFIG_SCSI_EATA is not set
+-# CONFIG_SCSI_FUTURE_DOMAIN is not set
+-# CONFIG_SCSI_GDTH is not set
+-# CONFIG_SCSI_IPS is not set
+-# CONFIG_SCSI_INITIO is not set
+-# CONFIG_SCSI_INIA100 is not set
+-# CONFIG_SCSI_MVSAS is not set
+-# CONFIG_SCSI_STEX is not set
+-# CONFIG_SCSI_SYM53C8XX_2 is not set
+-# CONFIG_SCSI_QLOGIC_1280 is not set
+-# CONFIG_SCSI_QLA_FC is not set
+-# CONFIG_SCSI_QLA_ISCSI is not set
+-# CONFIG_SCSI_LPFC is not set
+-# CONFIG_SCSI_DC395x is not set
+-# CONFIG_SCSI_DC390T is not set
+-# CONFIG_SCSI_NSP32 is not set
+-# CONFIG_SCSI_DEBUG is not set
+-# CONFIG_SCSI_SRP is not set
+-# CONFIG_ATA is not set
+-# CONFIG_MD is not set
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-# CONFIG_FIREWIRE is not set
+-# CONFIG_IEEE1394 is not set
+-# CONFIG_I2O is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_ARCNET is not set
+-CONFIG_PHYLIB=y
+-
+-#
+-# MII PHY device drivers
+-#
+-# CONFIG_MARVELL_PHY is not set
+-# CONFIG_DAVICOM_PHY is not set
+-# CONFIG_QSEMI_PHY is not set
+-# CONFIG_LXT_PHY is not set
+-# CONFIG_CICADA_PHY is not set
+-# CONFIG_VITESSE_PHY is not set
+-# CONFIG_SMSC_PHY is not set
+-# CONFIG_BROADCOM_PHY is not set
+-CONFIG_ICPLUS_PHY=y
+-# CONFIG_REALTEK_PHY is not set
+-# CONFIG_FIXED_PHY is not set
+-# CONFIG_MDIO_BITBANG is not set
+-CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
+-# CONFIG_HAPPYMEAL is not set
+-# CONFIG_SUNGEM is not set
+-# CONFIG_CASSINI is not set
+-# CONFIG_NET_VENDOR_3COM is not set
+-# CONFIG_ENC28J60 is not set
+-# CONFIG_NET_TULIP is not set
+-# CONFIG_HP100 is not set
+-# CONFIG_IBM_NEW_EMAC_ZMII is not set
+-# CONFIG_IBM_NEW_EMAC_RGMII is not set
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-# CONFIG_NET_PCI is not set
+-# CONFIG_B44 is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_ACENIC is not set
+-# CONFIG_DL2K is not set
+-CONFIG_E1000=y
+-# CONFIG_E1000_NAPI is not set
+-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+-# CONFIG_E1000E is not set
+-# CONFIG_E1000E_ENABLED is not set
+-# CONFIG_IP1000 is not set
+-# CONFIG_IGB is not set
+-# CONFIG_NS83820 is not set
+-# CONFIG_HAMACHI is not set
+-# CONFIG_YELLOWFIN is not set
+-# CONFIG_R8169 is not set
+-# CONFIG_SIS190 is not set
+-# CONFIG_SKGE is not set
+-# CONFIG_SKY2 is not set
+-# CONFIG_SK98LIN is not set
+-# CONFIG_VIA_VELOCITY is not set
+-# CONFIG_TIGON3 is not set
+-# CONFIG_BNX2 is not set
+-# CONFIG_GIANFAR is not set
+-CONFIG_UCC_GETH=y
+-CONFIG_UGETH_NAPI=y
+-# CONFIG_UGETH_MAGIC_PACKET is not set
+-# CONFIG_UGETH_FILTERING is not set
+-# CONFIG_UGETH_TX_ON_DEMAND is not set
+-# CONFIG_QLA3XXX is not set
+-# CONFIG_ATL1 is not set
+-CONFIG_NETDEV_10000=y
+-# CONFIG_CHELSIO_T1 is not set
+-# CONFIG_CHELSIO_T3 is not set
+-# CONFIG_IXGBE is not set
+-# CONFIG_IXGB is not set
+-# CONFIG_S2IO is not set
+-# CONFIG_MYRI10GE is not set
+-# CONFIG_NETXEN_NIC is not set
+-# CONFIG_NIU is not set
+-# CONFIG_MLX4_CORE is not set
+-# CONFIG_TEHUTI is not set
+-# CONFIG_BNX2X is not set
+-# CONFIG_TR is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-
+-#
+-# USB Network Adapters
+-#
+-# CONFIG_USB_CATC is not set
+-# CONFIG_USB_KAWETH is not set
+-# CONFIG_USB_PEGASUS is not set
+-# CONFIG_USB_RTL8150 is not set
+-# CONFIG_USB_USBNET is not set
+-# CONFIG_WAN is not set
+-# CONFIG_FDDI is not set
+-# CONFIG_HIPPI is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NET_FC is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-CONFIG_INPUT=y
+-# CONFIG_INPUT_FF_MEMLESS is not set
+-# CONFIG_INPUT_POLLDEV is not set
+-
+-#
+-# Userland interfaces
+-#
+-# CONFIG_INPUT_MOUSEDEV is not set
+-# CONFIG_INPUT_JOYDEV is not set
+-# CONFIG_INPUT_EVDEV is not set
+-# CONFIG_INPUT_EVBUG is not set
+-
+-#
+-# Input Device Drivers
+-#
+-# CONFIG_INPUT_KEYBOARD is not set
+-# CONFIG_INPUT_MOUSE is not set
+-# CONFIG_INPUT_JOYSTICK is not set
+-# CONFIG_INPUT_TABLET is not set
+-# CONFIG_INPUT_TOUCHSCREEN is not set
+-# CONFIG_INPUT_MISC is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-# CONFIG_NOZOMI is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-CONFIG_SERIAL_8250_PCI=y
+-CONFIG_SERIAL_8250_NR_UARTS=4
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-# CONFIG_SERIAL_8250_EXTENDED is not set
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_JSM is not set
+-# CONFIG_SERIAL_OF_PLATFORM is not set
+-# CONFIG_SERIAL_QE is not set
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-CONFIG_HW_RANDOM=y
+-# CONFIG_NVRAM is not set
+-CONFIG_GEN_RTC=y
+-# CONFIG_GEN_RTC_X is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_APPLICOM is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_DEVPORT=y
+-CONFIG_I2C=y
+-CONFIG_I2C_BOARDINFO=y
+-CONFIG_I2C_CHARDEV=y
+-
+-#
+-# I2C Algorithms
+-#
+-# CONFIG_I2C_ALGOBIT is not set
+-# CONFIG_I2C_ALGOPCF is not set
+-# CONFIG_I2C_ALGOPCA is not set
+-
+-#
+-# I2C Hardware Bus support
+-#
+-# CONFIG_I2C_ALI1535 is not set
+-# CONFIG_I2C_ALI1563 is not set
+-# CONFIG_I2C_ALI15X3 is not set
+-# CONFIG_I2C_AMD756 is not set
+-# CONFIG_I2C_AMD8111 is not set
+-# CONFIG_I2C_I801 is not set
+-# CONFIG_I2C_I810 is not set
+-# CONFIG_I2C_PIIX4 is not set
+-CONFIG_I2C_MPC=y
+-# CONFIG_I2C_NFORCE2 is not set
+-# CONFIG_I2C_OCORES is not set
+-# CONFIG_I2C_PARPORT_LIGHT is not set
+-# CONFIG_I2C_PROSAVAGE is not set
+-# CONFIG_I2C_SAVAGE4 is not set
+-# CONFIG_I2C_SIMTEC is not set
+-# CONFIG_I2C_SIS5595 is not set
+-# CONFIG_I2C_SIS630 is not set
+-# CONFIG_I2C_SIS96X is not set
+-# CONFIG_I2C_TAOS_EVM is not set
+-# CONFIG_I2C_STUB is not set
+-# CONFIG_I2C_TINY_USB is not set
+-# CONFIG_I2C_VIA is not set
+-# CONFIG_I2C_VIAPRO is not set
+-# CONFIG_I2C_VOODOO3 is not set
+-
+-#
+-# Miscellaneous I2C Chip support
+-#
+-# CONFIG_DS1682 is not set
+-# CONFIG_SENSORS_EEPROM is not set
+-# CONFIG_SENSORS_PCF8574 is not set
+-# CONFIG_PCF8575 is not set
+-# CONFIG_SENSORS_PCF8591 is not set
+-# CONFIG_TPS65010 is not set
+-# CONFIG_SENSORS_MAX6875 is not set
+-# CONFIG_SENSORS_TSL2550 is not set
+-# CONFIG_I2C_DEBUG_CORE is not set
+-# CONFIG_I2C_DEBUG_ALGO is not set
+-# CONFIG_I2C_DEBUG_BUS is not set
+-# CONFIG_I2C_DEBUG_CHIP is not set
+-
+-#
+-# SPI support
+-#
+-CONFIG_SPI=y
+-CONFIG_SPI_MASTER=y
+-
+-#
+-# SPI Master Controller Drivers
+-#
+-CONFIG_SPI_BITBANG=y
+-CONFIG_SPI_MPC83xx=y
+-
+-#
+-# SPI Protocol Masters
+-#
+-# CONFIG_SPI_AT25 is not set
+-# CONFIG_SPI_SPIDEV is not set
+-# CONFIG_SPI_TLE62X0 is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-CONFIG_HWMON=y
+-# CONFIG_HWMON_VID is not set
+-# CONFIG_SENSORS_AD7418 is not set
+-# CONFIG_SENSORS_ADM1021 is not set
+-# CONFIG_SENSORS_ADM1025 is not set
+-# CONFIG_SENSORS_ADM1026 is not set
+-# CONFIG_SENSORS_ADM1029 is not set
+-# CONFIG_SENSORS_ADM1031 is not set
+-# CONFIG_SENSORS_ADM9240 is not set
+-# CONFIG_SENSORS_ADT7470 is not set
+-# CONFIG_SENSORS_ADT7473 is not set
+-# CONFIG_SENSORS_ATXP1 is not set
+-# CONFIG_SENSORS_DS1621 is not set
+-# CONFIG_SENSORS_I5K_AMB is not set
+-# CONFIG_SENSORS_F71805F is not set
+-# CONFIG_SENSORS_F71882FG is not set
+-# CONFIG_SENSORS_F75375S is not set
+-# CONFIG_SENSORS_GL518SM is not set
+-# CONFIG_SENSORS_GL520SM is not set
+-# CONFIG_SENSORS_IT87 is not set
+-# CONFIG_SENSORS_LM63 is not set
+-# CONFIG_SENSORS_LM70 is not set
+-# CONFIG_SENSORS_LM75 is not set
+-# CONFIG_SENSORS_LM77 is not set
+-# CONFIG_SENSORS_LM78 is not set
+-# CONFIG_SENSORS_LM80 is not set
+-# CONFIG_SENSORS_LM83 is not set
+-# CONFIG_SENSORS_LM85 is not set
+-# CONFIG_SENSORS_LM87 is not set
+-# CONFIG_SENSORS_LM90 is not set
+-# CONFIG_SENSORS_LM92 is not set
+-# CONFIG_SENSORS_LM93 is not set
+-# CONFIG_SENSORS_MAX1619 is not set
+-# CONFIG_SENSORS_MAX6650 is not set
+-# CONFIG_SENSORS_PC87360 is not set
+-# CONFIG_SENSORS_PC87427 is not set
+-# CONFIG_SENSORS_SIS5595 is not set
+-# CONFIG_SENSORS_DME1737 is not set
+-# CONFIG_SENSORS_SMSC47M1 is not set
+-# CONFIG_SENSORS_SMSC47M192 is not set
+-# CONFIG_SENSORS_SMSC47B397 is not set
+-# CONFIG_SENSORS_ADS7828 is not set
+-# CONFIG_SENSORS_THMC50 is not set
+-# CONFIG_SENSORS_VIA686A is not set
+-# CONFIG_SENSORS_VT1211 is not set
+-# CONFIG_SENSORS_VT8231 is not set
+-# CONFIG_SENSORS_W83781D is not set
+-# CONFIG_SENSORS_W83791D is not set
+-# CONFIG_SENSORS_W83792D is not set
+-# CONFIG_SENSORS_W83793 is not set
+-# CONFIG_SENSORS_W83L785TS is not set
+-# CONFIG_SENSORS_W83L786NG is not set
+-# CONFIG_SENSORS_W83627HF is not set
+-# CONFIG_SENSORS_W83627EHF is not set
+-# CONFIG_HWMON_DEBUG_CHIP is not set
+-# CONFIG_THERMAL is not set
+-CONFIG_WATCHDOG=y
+-# CONFIG_WATCHDOG_NOWAYOUT is not set
+-
+-#
+-# Watchdog Device Drivers
+-#
+-# CONFIG_SOFT_WATCHDOG is not set
+-CONFIG_83xx_WDT=y
+-
+-#
+-# PCI-based Watchdog Cards
+-#
+-# CONFIG_PCIPCWATCHDOG is not set
+-# CONFIG_WDTPCI is not set
+-
+-#
+-# USB-based Watchdog Cards
+-#
+-# CONFIG_USBPCWATCHDOG is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-CONFIG_DAB=y
+-# CONFIG_USB_DABUSB is not set
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_AGP is not set
+-# CONFIG_DRM is not set
+-# CONFIG_VGASTATE is not set
+-CONFIG_VIDEO_OUTPUT_CONTROL=m
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-CONFIG_HID_SUPPORT=y
+-CONFIG_HID=y
+-# CONFIG_HID_DEBUG is not set
+-# CONFIG_HIDRAW is not set
+-
+-#
+-# USB Input Devices
+-#
+-# CONFIG_USB_HID is not set
+-
+-#
+-# USB HID Boot Protocol drivers
+-#
+-# CONFIG_USB_KBD is not set
+-# CONFIG_USB_MOUSE is not set
+-CONFIG_USB_SUPPORT=y
+-CONFIG_USB_ARCH_HAS_HCD=y
+-CONFIG_USB_ARCH_HAS_OHCI=y
+-CONFIG_USB_ARCH_HAS_EHCI=y
+-CONFIG_USB=y
+-# CONFIG_USB_DEBUG is not set
+-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+-
+-#
+-# Miscellaneous USB options
+-#
+-CONFIG_USB_DEVICEFS=y
+-CONFIG_USB_DEVICE_CLASS=y
+-# CONFIG_USB_DYNAMIC_MINORS is not set
+-# CONFIG_USB_OTG is not set
+-
+-#
+-# USB Host Controller Drivers
+-#
+-CONFIG_USB_EHCI_HCD=y
+-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+-# CONFIG_USB_EHCI_FSL is not set
+-CONFIG_USB_EHCI_HCD_PPC_OF=y
+-# CONFIG_USB_ISP116X_HCD is not set
+-CONFIG_USB_OHCI_HCD=y
+-CONFIG_USB_OHCI_HCD_PPC_OF=y
+-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+-CONFIG_USB_OHCI_HCD_PCI=y
+-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+-# CONFIG_USB_UHCI_HCD is not set
+-# CONFIG_USB_SL811_HCD is not set
+-# CONFIG_USB_R8A66597_HCD is not set
+-
+-#
+-# USB Device Class drivers
+-#
+-# CONFIG_USB_ACM is not set
+-# CONFIG_USB_PRINTER is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-
+-#
+-# may also be needed; see USB_STORAGE Help for more information
+-#
+-CONFIG_USB_STORAGE=y
+-# CONFIG_USB_STORAGE_DEBUG is not set
+-# CONFIG_USB_STORAGE_DATAFAB is not set
+-# CONFIG_USB_STORAGE_FREECOM is not set
+-# CONFIG_USB_STORAGE_ISD200 is not set
+-# CONFIG_USB_STORAGE_DPCM is not set
+-# CONFIG_USB_STORAGE_USBAT is not set
+-# CONFIG_USB_STORAGE_SDDR09 is not set
+-# CONFIG_USB_STORAGE_SDDR55 is not set
+-# CONFIG_USB_STORAGE_JUMPSHOT is not set
+-# CONFIG_USB_STORAGE_ALAUDA is not set
+-# CONFIG_USB_STORAGE_KARMA is not set
+-# CONFIG_USB_LIBUSUAL is not set
+-
+-#
+-# USB Imaging devices
+-#
+-# CONFIG_USB_MDC800 is not set
+-# CONFIG_USB_MICROTEK is not set
+-CONFIG_USB_MON=y
+-
+-#
+-# USB port drivers
+-#
+-# CONFIG_USB_SERIAL is not set
+-
+-#
+-# USB Miscellaneous drivers
+-#
+-# CONFIG_USB_EMI62 is not set
+-# CONFIG_USB_EMI26 is not set
+-# CONFIG_USB_ADUTUX is not set
+-# CONFIG_USB_AUERSWALD is not set
+-# CONFIG_USB_RIO500 is not set
+-# CONFIG_USB_LEGOTOWER is not set
+-# CONFIG_USB_LCD is not set
+-# CONFIG_USB_BERRY_CHARGE is not set
+-# CONFIG_USB_LED is not set
+-# CONFIG_USB_CYPRESS_CY7C63 is not set
+-# CONFIG_USB_CYTHERM is not set
+-# CONFIG_USB_PHIDGET is not set
+-# CONFIG_USB_IDMOUSE is not set
+-# CONFIG_USB_FTDI_ELAN is not set
+-# CONFIG_USB_APPLEDISPLAY is not set
+-# CONFIG_USB_SISUSBVGA is not set
+-# CONFIG_USB_LD is not set
+-# CONFIG_USB_TRANCEVIBRATOR is not set
+-# CONFIG_USB_IOWARRIOR is not set
+-# CONFIG_USB_TEST is not set
+-# CONFIG_USB_GADGET is not set
+-CONFIG_MMC=y
+-# CONFIG_MMC_DEBUG is not set
+-# CONFIG_MMC_UNSAFE_RESUME is not set
+-
+-#
+-# MMC/SD Card Drivers
+-#
+-CONFIG_MMC_BLOCK=y
+-CONFIG_MMC_BLOCK_BOUNCE=y
+-# CONFIG_SDIO_UART is not set
+-
+-#
+-# MMC/SD Host Controller Drivers
+-#
+-# CONFIG_MMC_SDHCI is not set
+-# CONFIG_MMC_WBSD is not set
+-# CONFIG_MMC_TIFM_SD is not set
+-CONFIG_MMC_SPI=y
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_INFINIBAND is not set
+-# CONFIG_EDAC is not set
+-# CONFIG_RTC_CLASS is not set
+-# CONFIG_DMADEVICES is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=y
+-CONFIG_EXT3_FS_XATTR=y
+-# CONFIG_EXT3_FS_POSIX_ACL is not set
+-# CONFIG_EXT3_FS_SECURITY is not set
+-# CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=y
+-CONFIG_FS_MBCACHE=y
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-CONFIG_FAT_FS=y
+-CONFIG_MSDOS_FS=y
+-CONFIG_VFAT_FS=y
+-CONFIG_FAT_DEFAULT_CODEPAGE=437
+-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-# CONFIG_CRAMFS is not set
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-CONFIG_NFS_V3=y
+-# CONFIG_NFS_V3_ACL is not set
+-CONFIG_NFS_V4=y
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_LOCKD_V4=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-CONFIG_SUNRPC_GSS=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-CONFIG_RPCSEC_GSS_KRB5=y
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-CONFIG_PARTITION_ADVANCED=y
+-# CONFIG_ACORN_PARTITION is not set
+-# CONFIG_OSF_PARTITION is not set
+-# CONFIG_AMIGA_PARTITION is not set
+-# CONFIG_ATARI_PARTITION is not set
+-# CONFIG_MAC_PARTITION is not set
+-CONFIG_MSDOS_PARTITION=y
+-# CONFIG_BSD_DISKLABEL is not set
+-# CONFIG_MINIX_SUBPARTITION is not set
+-# CONFIG_SOLARIS_X86_PARTITION is not set
+-# CONFIG_UNIXWARE_DISKLABEL is not set
+-CONFIG_LDM_PARTITION=y
+-# CONFIG_LDM_DEBUG is not set
+-# CONFIG_SGI_PARTITION is not set
+-# CONFIG_ULTRIX_PARTITION is not set
+-# CONFIG_SUN_PARTITION is not set
+-# CONFIG_KARMA_PARTITION is not set
+-# CONFIG_EFI_PARTITION is not set
+-# CONFIG_SYSV68_PARTITION is not set
+-CONFIG_NLS=y
+-CONFIG_NLS_DEFAULT="iso8859-1"
+-CONFIG_NLS_CODEPAGE_437=y
+-# CONFIG_NLS_CODEPAGE_737 is not set
+-# CONFIG_NLS_CODEPAGE_775 is not set
+-# CONFIG_NLS_CODEPAGE_850 is not set
+-# CONFIG_NLS_CODEPAGE_852 is not set
+-# CONFIG_NLS_CODEPAGE_855 is not set
+-# CONFIG_NLS_CODEPAGE_857 is not set
+-# CONFIG_NLS_CODEPAGE_860 is not set
+-# CONFIG_NLS_CODEPAGE_861 is not set
+-# CONFIG_NLS_CODEPAGE_862 is not set
+-# CONFIG_NLS_CODEPAGE_863 is not set
+-# CONFIG_NLS_CODEPAGE_864 is not set
+-# CONFIG_NLS_CODEPAGE_865 is not set
+-# CONFIG_NLS_CODEPAGE_866 is not set
+-# CONFIG_NLS_CODEPAGE_869 is not set
+-# CONFIG_NLS_CODEPAGE_936 is not set
+-# CONFIG_NLS_CODEPAGE_950 is not set
+-CONFIG_NLS_CODEPAGE_932=y
+-# CONFIG_NLS_CODEPAGE_949 is not set
+-# CONFIG_NLS_CODEPAGE_874 is not set
+-CONFIG_NLS_ISO8859_8=y
+-# CONFIG_NLS_CODEPAGE_1250 is not set
+-# CONFIG_NLS_CODEPAGE_1251 is not set
+-# CONFIG_NLS_ASCII is not set
+-CONFIG_NLS_ISO8859_1=y
+-# CONFIG_NLS_ISO8859_2 is not set
+-# CONFIG_NLS_ISO8859_3 is not set
+-# CONFIG_NLS_ISO8859_4 is not set
+-# CONFIG_NLS_ISO8859_5 is not set
+-# CONFIG_NLS_ISO8859_6 is not set
+-# CONFIG_NLS_ISO8859_7 is not set
+-# CONFIG_NLS_ISO8859_9 is not set
+-# CONFIG_NLS_ISO8859_13 is not set
+-# CONFIG_NLS_ISO8859_14 is not set
+-# CONFIG_NLS_ISO8859_15 is not set
+-# CONFIG_NLS_KOI8_R is not set
+-# CONFIG_NLS_KOI8_U is not set
+-# CONFIG_NLS_UTF8 is not set
+-# CONFIG_DLM is not set
+-CONFIG_UCC_FAST=y
+-CONFIG_UCC=y
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-CONFIG_CRC_ITU_T=y
+-CONFIG_CRC32=y
+-CONFIG_CRC7=y
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-# CONFIG_MAGIC_SYSRQ is not set
+-# CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
+-# CONFIG_HEADERS_CHECK is not set
+-# CONFIG_DEBUG_KERNEL is not set
+-# CONFIG_SLUB_DEBUG_ON is not set
+-# CONFIG_SLUB_STATS is not set
+-# CONFIG_DEBUG_BUGVERBOSE is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_PPC_EARLY_DEBUG is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_BLKCIPHER=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-CONFIG_CRYPTO_MANAGER=y
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-CONFIG_CRYPTO_MD5=y
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-CONFIG_CRYPTO_ECB=m
+-CONFIG_CRYPTO_CBC=y
+-CONFIG_CRYPTO_PCBC=m
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-CONFIG_CRYPTO_DES=y
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_TEST is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+-# CONFIG_PPC_CLOCK is not set
+-CONFIG_PPC_LIB_RHEAP=y
+--- a/arch/powerpc/configs/mpc834x_itx_defconfig
++++ /dev/null
+@@ -1,1295 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc6
+-# Mon Mar 24 08:48:17 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-CONFIG_6xx=y
+-# CONFIG_PPC_85xx is not set
+-# CONFIG_PPC_8xx is not set
+-# CONFIG_40x is not set
+-# CONFIG_44x is not set
+-# CONFIG_E200 is not set
+-CONFIG_PPC_FPU=y
+-# CONFIG_FSL_EMB_PERFMON is not set
+-CONFIG_PPC_STD_MMU=y
+-CONFIG_PPC_STD_MMU_32=y
+-# CONFIG_PPC_MM_SLICES is not set
+-# CONFIG_SMP is not set
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-CONFIG_DEFAULT_UIMAGE=y
+-# CONFIG_PPC_DCR_NATIVE is not set
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-# CONFIG_POSIX_MQUEUE is not set
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-# CONFIG_FAIR_GROUP_SCHED is not set
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-CONFIG_SYSFS_DEPRECATED_V2=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-# CONFIG_KALLSYMS is not set
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-# CONFIG_EPOLL is not set
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLUB_DEBUG=y
+-# CONFIG_SLAB is not set
+-CONFIG_SLUB=y
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_HAVE_KRETPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-CONFIG_MODULES=y
+-CONFIG_MODULE_UNLOAD=y
+-# CONFIG_MODULE_FORCE_UNLOAD is not set
+-# CONFIG_MODVERSIONS is not set
+-# CONFIG_MODULE_SRCVERSION_ALL is not set
+-# CONFIG_KMOD is not set
+-CONFIG_BLOCK=y
+-# CONFIG_LBD is not set
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MULTIPLATFORM is not set
+-# CONFIG_PPC_82xx is not set
+-CONFIG_PPC_83xx=y
+-# CONFIG_PPC_86xx is not set
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-CONFIG_MPC83xx=y
+-# CONFIG_MPC831x_RDB is not set
+-# CONFIG_MPC832x_MDS is not set
+-# CONFIG_MPC832x_RDB is not set
+-# CONFIG_MPC834x_MDS is not set
+-CONFIG_MPC834x_ITX=y
+-# CONFIG_MPC836x_MDS is not set
+-# CONFIG_MPC837x_MDS is not set
+-# CONFIG_MPC837x_RDB is not set
+-# CONFIG_SBC834x is not set
+-CONFIG_PPC_MPC834x=y
+-CONFIG_IPIC=y
+-# CONFIG_MPIC is not set
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-# CONFIG_FSL_ULI1575 is not set
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-CONFIG_TICK_ONESHOT=y
+-CONFIG_NO_HZ=y
+-CONFIG_HIGH_RES_TIMERS=y
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_BINFMT_ELF=y
+-# CONFIG_BINFMT_MISC is not set
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_RESOURCES_64BIT is not set
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-CONFIG_PROC_DEVICETREE=y
+-# CONFIG_CMDLINE_BOOL is not set
+-# CONFIG_PM is not set
+-CONFIG_SECCOMP=y
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_GENERIC_ISA_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_FSL_SOC=y
+-CONFIG_PCI=y
+-CONFIG_PCI_DOMAINS=y
+-CONFIG_PCI_SYSCALL=y
+-# CONFIG_PCIEPORTBUS is not set
+-CONFIG_ARCH_SUPPORTS_MSI=y
+-# CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
+-# CONFIG_PCCARD is not set
+-# CONFIG_HOTPLUG_PCI is not set
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_BOOT_LOAD=0x00800000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-CONFIG_XFRM=y
+-# CONFIG_XFRM_USER is not set
+-# CONFIG_XFRM_SUB_POLICY is not set
+-# CONFIG_XFRM_MIGRATE is not set
+-# CONFIG_XFRM_STATISTICS is not set
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-CONFIG_IP_MULTICAST=y
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_IP_MROUTE is not set
+-# CONFIG_ARPD is not set
+-CONFIG_SYN_COOKIES=y
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-CONFIG_INET_XFRM_MODE_TRANSPORT=y
+-CONFIG_INET_XFRM_MODE_TUNNEL=y
+-CONFIG_INET_XFRM_MODE_BEET=y
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-# CONFIG_FW_LOADER is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-# CONFIG_CONNECTOR is not set
+-CONFIG_MTD=y
+-# CONFIG_MTD_DEBUG is not set
+-# CONFIG_MTD_CONCAT is not set
+-# CONFIG_MTD_PARTITIONS is not set
+-
+-#
+-# User Modules And Translation Layers
+-#
+-CONFIG_MTD_CHAR=y
+-# CONFIG_MTD_BLKDEVS is not set
+-# CONFIG_MTD_BLOCK is not set
+-# CONFIG_MTD_BLOCK_RO is not set
+-# CONFIG_FTL is not set
+-# CONFIG_NFTL is not set
+-# CONFIG_INFTL is not set
+-# CONFIG_RFD_FTL is not set
+-# CONFIG_SSFDC is not set
+-# CONFIG_MTD_OOPS is not set
+-
+-#
+-# RAM/ROM/Flash chip drivers
+-#
+-CONFIG_MTD_CFI=y
+-# CONFIG_MTD_JEDECPROBE is not set
+-CONFIG_MTD_GEN_PROBE=y
+-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+-CONFIG_MTD_MAP_BANK_WIDTH_1=y
+-CONFIG_MTD_MAP_BANK_WIDTH_2=y
+-CONFIG_MTD_MAP_BANK_WIDTH_4=y
+-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+-CONFIG_MTD_CFI_I1=y
+-CONFIG_MTD_CFI_I2=y
+-# CONFIG_MTD_CFI_I4 is not set
+-# CONFIG_MTD_CFI_I8 is not set
+-# CONFIG_MTD_CFI_INTELEXT is not set
+-CONFIG_MTD_CFI_AMDSTD=y
+-# CONFIG_MTD_CFI_STAA is not set
+-CONFIG_MTD_CFI_UTIL=y
+-# CONFIG_MTD_RAM is not set
+-# CONFIG_MTD_ROM is not set
+-# CONFIG_MTD_ABSENT is not set
+-
+-#
+-# Mapping drivers for chip access
+-#
+-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+-CONFIG_MTD_PHYSMAP=y
+-CONFIG_MTD_PHYSMAP_START=0xfe000000
+-CONFIG_MTD_PHYSMAP_LEN=0x1000000
+-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+-# CONFIG_MTD_PHYSMAP_OF is not set
+-# CONFIG_MTD_INTEL_VR_NOR is not set
+-# CONFIG_MTD_PLATRAM is not set
+-
+-#
+-# Self-contained MTD device drivers
+-#
+-# CONFIG_MTD_PMC551 is not set
+-# CONFIG_MTD_DATAFLASH is not set
+-# CONFIG_MTD_M25P80 is not set
+-# CONFIG_MTD_SLRAM is not set
+-# CONFIG_MTD_PHRAM is not set
+-# CONFIG_MTD_MTDRAM is not set
+-# CONFIG_MTD_BLOCK2MTD is not set
+-
+-#
+-# Disk-On-Chip Device Drivers
+-#
+-# CONFIG_MTD_DOC2000 is not set
+-# CONFIG_MTD_DOC2001 is not set
+-# CONFIG_MTD_DOC2001PLUS is not set
+-# CONFIG_MTD_NAND is not set
+-# CONFIG_MTD_ONENAND is not set
+-
+-#
+-# UBI - Unsorted block images
+-#
+-# CONFIG_MTD_UBI is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_CPQ_DA is not set
+-# CONFIG_BLK_CPQ_CISS_DA is not set
+-# CONFIG_BLK_DEV_DAC960 is not set
+-# CONFIG_BLK_DEV_UMEM is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-CONFIG_BLK_DEV_LOOP=y
+-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-# CONFIG_BLK_DEV_SX8 is not set
+-# CONFIG_BLK_DEV_UB is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=32768
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_PHANTOM is not set
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_SGI_IOC4 is not set
+-# CONFIG_TIFM_CORE is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-CONFIG_IDE=y
+-CONFIG_IDE_MAX_HWIFS=4
+-# CONFIG_BLK_DEV_IDE is not set
+-# CONFIG_BLK_DEV_HD_ONLY is not set
+-# CONFIG_BLK_DEV_HD is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-CONFIG_SCSI=y
+-CONFIG_SCSI_DMA=y
+-# CONFIG_SCSI_TGT is not set
+-# CONFIG_SCSI_NETLINK is not set
+-CONFIG_SCSI_PROC_FS=y
+-
+-#
+-# SCSI support type (disk, tape, CD-ROM)
+-#
+-CONFIG_BLK_DEV_SD=y
+-# CONFIG_CHR_DEV_ST is not set
+-# CONFIG_CHR_DEV_OSST is not set
+-# CONFIG_BLK_DEV_SR is not set
+-CONFIG_CHR_DEV_SG=y
+-# CONFIG_CHR_DEV_SCH is not set
+-
+-#
+-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+-#
+-# CONFIG_SCSI_MULTI_LUN is not set
+-# CONFIG_SCSI_CONSTANTS is not set
+-# CONFIG_SCSI_LOGGING is not set
+-# CONFIG_SCSI_SCAN_ASYNC is not set
+-CONFIG_SCSI_WAIT_SCAN=m
+-
+-#
+-# SCSI Transports
+-#
+-CONFIG_SCSI_SPI_ATTRS=y
+-# CONFIG_SCSI_FC_ATTRS is not set
+-# CONFIG_SCSI_ISCSI_ATTRS is not set
+-# CONFIG_SCSI_SAS_LIBSAS is not set
+-# CONFIG_SCSI_SRP_ATTRS is not set
+-CONFIG_SCSI_LOWLEVEL=y
+-# CONFIG_ISCSI_TCP is not set
+-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+-# CONFIG_SCSI_3W_9XXX is not set
+-# CONFIG_SCSI_ACARD is not set
+-# CONFIG_SCSI_AACRAID is not set
+-# CONFIG_SCSI_AIC7XXX is not set
+-# CONFIG_SCSI_AIC7XXX_OLD is not set
+-# CONFIG_SCSI_AIC79XX is not set
+-# CONFIG_SCSI_AIC94XX is not set
+-# CONFIG_SCSI_DPT_I2O is not set
+-# CONFIG_SCSI_ADVANSYS is not set
+-# CONFIG_SCSI_ARCMSR is not set
+-# CONFIG_MEGARAID_NEWGEN is not set
+-# CONFIG_MEGARAID_LEGACY is not set
+-# CONFIG_MEGARAID_SAS is not set
+-# CONFIG_SCSI_HPTIOP is not set
+-# CONFIG_SCSI_BUSLOGIC is not set
+-# CONFIG_SCSI_DMX3191D is not set
+-# CONFIG_SCSI_EATA is not set
+-# CONFIG_SCSI_FUTURE_DOMAIN is not set
+-# CONFIG_SCSI_GDTH is not set
+-# CONFIG_SCSI_IPS is not set
+-# CONFIG_SCSI_INITIO is not set
+-# CONFIG_SCSI_INIA100 is not set
+-# CONFIG_SCSI_MVSAS is not set
+-# CONFIG_SCSI_STEX is not set
+-# CONFIG_SCSI_SYM53C8XX_2 is not set
+-# CONFIG_SCSI_IPR is not set
+-# CONFIG_SCSI_QLOGIC_1280 is not set
+-# CONFIG_SCSI_QLA_FC is not set
+-# CONFIG_SCSI_QLA_ISCSI is not set
+-# CONFIG_SCSI_LPFC is not set
+-# CONFIG_SCSI_DC395x is not set
+-# CONFIG_SCSI_DC390T is not set
+-# CONFIG_SCSI_NSP32 is not set
+-# CONFIG_SCSI_DEBUG is not set
+-# CONFIG_SCSI_SRP is not set
+-CONFIG_ATA=y
+-# CONFIG_ATA_NONSTANDARD is not set
+-# CONFIG_SATA_AHCI is not set
+-# CONFIG_SATA_SVW is not set
+-# CONFIG_ATA_PIIX is not set
+-# CONFIG_SATA_MV is not set
+-# CONFIG_SATA_NV is not set
+-# CONFIG_PDC_ADMA is not set
+-# CONFIG_SATA_QSTOR is not set
+-# CONFIG_SATA_PROMISE is not set
+-# CONFIG_SATA_SX4 is not set
+-CONFIG_SATA_SIL=y
+-# CONFIG_SATA_SIL24 is not set
+-# CONFIG_SATA_SIS is not set
+-# CONFIG_SATA_ULI is not set
+-# CONFIG_SATA_VIA is not set
+-# CONFIG_SATA_VITESSE is not set
+-# CONFIG_SATA_INIC162X is not set
+-# CONFIG_SATA_FSL is not set
+-# CONFIG_PATA_ALI is not set
+-# CONFIG_PATA_AMD is not set
+-# CONFIG_PATA_ARTOP is not set
+-# CONFIG_PATA_ATIIXP is not set
+-# CONFIG_PATA_CMD640_PCI is not set
+-# CONFIG_PATA_CMD64X is not set
+-# CONFIG_PATA_CS5520 is not set
+-# CONFIG_PATA_CS5530 is not set
+-# CONFIG_PATA_CYPRESS is not set
+-# CONFIG_PATA_EFAR is not set
+-# CONFIG_ATA_GENERIC is not set
+-# CONFIG_PATA_HPT366 is not set
+-# CONFIG_PATA_HPT37X is not set
+-# CONFIG_PATA_HPT3X2N is not set
+-# CONFIG_PATA_HPT3X3 is not set
+-# CONFIG_PATA_IT821X is not set
+-# CONFIG_PATA_IT8213 is not set
+-# CONFIG_PATA_JMICRON is not set
+-# CONFIG_PATA_TRIFLEX is not set
+-# CONFIG_PATA_MARVELL is not set
+-# CONFIG_PATA_MPIIX is not set
+-# CONFIG_PATA_OLDPIIX is not set
+-# CONFIG_PATA_NETCELL is not set
+-# CONFIG_PATA_NINJA32 is not set
+-# CONFIG_PATA_NS87410 is not set
+-# CONFIG_PATA_NS87415 is not set
+-# CONFIG_PATA_OPTI is not set
+-# CONFIG_PATA_OPTIDMA is not set
+-# CONFIG_PATA_PDC_OLD is not set
+-# CONFIG_PATA_RADISYS is not set
+-# CONFIG_PATA_RZ1000 is not set
+-# CONFIG_PATA_SC1200 is not set
+-# CONFIG_PATA_SERVERWORKS is not set
+-# CONFIG_PATA_PDC2027X is not set
+-# CONFIG_PATA_SIL680 is not set
+-# CONFIG_PATA_SIS is not set
+-# CONFIG_PATA_VIA is not set
+-# CONFIG_PATA_WINBOND is not set
+-CONFIG_PATA_PLATFORM=y
+-CONFIG_PATA_OF_PLATFORM=y
+-CONFIG_MD=y
+-CONFIG_BLK_DEV_MD=y
+-CONFIG_MD_LINEAR=y
+-CONFIG_MD_RAID0=y
+-CONFIG_MD_RAID1=y
+-# CONFIG_MD_RAID10 is not set
+-# CONFIG_MD_RAID456 is not set
+-# CONFIG_MD_MULTIPATH is not set
+-# CONFIG_MD_FAULTY is not set
+-# CONFIG_BLK_DEV_DM is not set
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-# CONFIG_FIREWIRE is not set
+-# CONFIG_IEEE1394 is not set
+-# CONFIG_I2O is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_ARCNET is not set
+-CONFIG_PHYLIB=y
+-
+-#
+-# MII PHY device drivers
+-#
+-# CONFIG_MARVELL_PHY is not set
+-# CONFIG_DAVICOM_PHY is not set
+-# CONFIG_QSEMI_PHY is not set
+-# CONFIG_LXT_PHY is not set
+-CONFIG_CICADA_PHY=y
+-# CONFIG_VITESSE_PHY is not set
+-# CONFIG_SMSC_PHY is not set
+-# CONFIG_BROADCOM_PHY is not set
+-# CONFIG_ICPLUS_PHY is not set
+-# CONFIG_REALTEK_PHY is not set
+-# CONFIG_FIXED_PHY is not set
+-# CONFIG_MDIO_BITBANG is not set
+-# CONFIG_NET_ETHERNET is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_ACENIC is not set
+-# CONFIG_DL2K is not set
+-# CONFIG_E1000 is not set
+-# CONFIG_E1000E is not set
+-# CONFIG_E1000E_ENABLED is not set
+-# CONFIG_IP1000 is not set
+-# CONFIG_IGB is not set
+-# CONFIG_NS83820 is not set
+-# CONFIG_HAMACHI is not set
+-# CONFIG_YELLOWFIN is not set
+-# CONFIG_R8169 is not set
+-# CONFIG_SIS190 is not set
+-# CONFIG_SKGE is not set
+-# CONFIG_SKY2 is not set
+-# CONFIG_SK98LIN is not set
+-# CONFIG_VIA_VELOCITY is not set
+-# CONFIG_TIGON3 is not set
+-# CONFIG_BNX2 is not set
+-CONFIG_GIANFAR=y
+-CONFIG_GFAR_NAPI=y
+-# CONFIG_QLA3XXX is not set
+-# CONFIG_ATL1 is not set
+-CONFIG_NETDEV_10000=y
+-# CONFIG_CHELSIO_T1 is not set
+-# CONFIG_CHELSIO_T3 is not set
+-# CONFIG_IXGBE is not set
+-# CONFIG_IXGB is not set
+-# CONFIG_S2IO is not set
+-# CONFIG_MYRI10GE is not set
+-# CONFIG_NETXEN_NIC is not set
+-# CONFIG_NIU is not set
+-# CONFIG_MLX4_CORE is not set
+-# CONFIG_TEHUTI is not set
+-# CONFIG_BNX2X is not set
+-# CONFIG_TR is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-
+-#
+-# USB Network Adapters
+-#
+-# CONFIG_USB_CATC is not set
+-# CONFIG_USB_KAWETH is not set
+-# CONFIG_USB_PEGASUS is not set
+-# CONFIG_USB_RTL8150 is not set
+-# CONFIG_USB_USBNET is not set
+-# CONFIG_WAN is not set
+-# CONFIG_FDDI is not set
+-# CONFIG_HIPPI is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NET_FC is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-# CONFIG_INPUT is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-# CONFIG_NOZOMI is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-# CONFIG_SERIAL_8250_PCI is not set
+-CONFIG_SERIAL_8250_NR_UARTS=4
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-# CONFIG_SERIAL_8250_EXTENDED is not set
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_JSM is not set
+-# CONFIG_SERIAL_OF_PLATFORM is not set
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-CONFIG_HW_RANDOM=y
+-# CONFIG_NVRAM is not set
+-# CONFIG_GEN_RTC is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_APPLICOM is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_DEVPORT=y
+-CONFIG_I2C=y
+-CONFIG_I2C_BOARDINFO=y
+-CONFIG_I2C_CHARDEV=y
+-
+-#
+-# I2C Algorithms
+-#
+-# CONFIG_I2C_ALGOBIT is not set
+-# CONFIG_I2C_ALGOPCF is not set
+-# CONFIG_I2C_ALGOPCA is not set
+-
+-#
+-# I2C Hardware Bus support
+-#
+-# CONFIG_I2C_ALI1535 is not set
+-# CONFIG_I2C_ALI1563 is not set
+-# CONFIG_I2C_ALI15X3 is not set
+-# CONFIG_I2C_AMD756 is not set
+-# CONFIG_I2C_AMD8111 is not set
+-# CONFIG_I2C_I801 is not set
+-# CONFIG_I2C_I810 is not set
+-# CONFIG_I2C_PIIX4 is not set
+-CONFIG_I2C_MPC=y
+-# CONFIG_I2C_NFORCE2 is not set
+-# CONFIG_I2C_OCORES is not set
+-# CONFIG_I2C_PARPORT_LIGHT is not set
+-# CONFIG_I2C_PROSAVAGE is not set
+-# CONFIG_I2C_SAVAGE4 is not set
+-# CONFIG_I2C_SIMTEC is not set
+-# CONFIG_I2C_SIS5595 is not set
+-# CONFIG_I2C_SIS630 is not set
+-# CONFIG_I2C_SIS96X is not set
+-# CONFIG_I2C_TAOS_EVM is not set
+-# CONFIG_I2C_STUB is not set
+-# CONFIG_I2C_TINY_USB is not set
+-# CONFIG_I2C_VIA is not set
+-# CONFIG_I2C_VIAPRO is not set
+-# CONFIG_I2C_VOODOO3 is not set
+-
+-#
+-# Miscellaneous I2C Chip support
+-#
+-# CONFIG_DS1682 is not set
+-# CONFIG_SENSORS_EEPROM is not set
+-CONFIG_SENSORS_PCF8574=y
+-# CONFIG_PCF8575 is not set
+-# CONFIG_SENSORS_PCF8591 is not set
+-# CONFIG_TPS65010 is not set
+-# CONFIG_SENSORS_MAX6875 is not set
+-# CONFIG_SENSORS_TSL2550 is not set
+-# CONFIG_I2C_DEBUG_CORE is not set
+-# CONFIG_I2C_DEBUG_ALGO is not set
+-# CONFIG_I2C_DEBUG_BUS is not set
+-# CONFIG_I2C_DEBUG_CHIP is not set
+-
+-#
+-# SPI support
+-#
+-CONFIG_SPI=y
+-CONFIG_SPI_MASTER=y
+-
+-#
+-# SPI Master Controller Drivers
+-#
+-CONFIG_SPI_BITBANG=y
+-CONFIG_SPI_MPC83xx=y
+-
+-#
+-# SPI Protocol Masters
+-#
+-# CONFIG_SPI_AT25 is not set
+-# CONFIG_SPI_SPIDEV is not set
+-# CONFIG_SPI_TLE62X0 is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-# CONFIG_HWMON is not set
+-# CONFIG_THERMAL is not set
+-CONFIG_WATCHDOG=y
+-# CONFIG_WATCHDOG_NOWAYOUT is not set
+-
+-#
+-# Watchdog Device Drivers
+-#
+-# CONFIG_SOFT_WATCHDOG is not set
+-CONFIG_83xx_WDT=y
+-
+-#
+-# PCI-based Watchdog Cards
+-#
+-# CONFIG_PCIPCWATCHDOG is not set
+-# CONFIG_WDTPCI is not set
+-
+-#
+-# USB-based Watchdog Cards
+-#
+-# CONFIG_USBPCWATCHDOG is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-CONFIG_DAB=y
+-# CONFIG_USB_DABUSB is not set
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_AGP is not set
+-# CONFIG_DRM is not set
+-# CONFIG_VGASTATE is not set
+-CONFIG_VIDEO_OUTPUT_CONTROL=m
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-CONFIG_USB_SUPPORT=y
+-CONFIG_USB_ARCH_HAS_HCD=y
+-CONFIG_USB_ARCH_HAS_OHCI=y
+-CONFIG_USB_ARCH_HAS_EHCI=y
+-CONFIG_USB=y
+-# CONFIG_USB_DEBUG is not set
+-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+-
+-#
+-# Miscellaneous USB options
+-#
+-CONFIG_USB_DEVICEFS=y
+-CONFIG_USB_DEVICE_CLASS=y
+-# CONFIG_USB_DYNAMIC_MINORS is not set
+-# CONFIG_USB_OTG is not set
+-
+-#
+-# USB Host Controller Drivers
+-#
+-CONFIG_USB_EHCI_HCD=y
+-CONFIG_USB_EHCI_ROOT_HUB_TT=y
+-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+-CONFIG_USB_EHCI_FSL=y
+-CONFIG_USB_EHCI_HCD_PPC_OF=y
+-# CONFIG_USB_ISP116X_HCD is not set
+-# CONFIG_USB_OHCI_HCD is not set
+-CONFIG_USB_UHCI_HCD=y
+-# CONFIG_USB_SL811_HCD is not set
+-# CONFIG_USB_R8A66597_HCD is not set
+-
+-#
+-# USB Device Class drivers
+-#
+-# CONFIG_USB_ACM is not set
+-# CONFIG_USB_PRINTER is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-
+-#
+-# may also be needed; see USB_STORAGE Help for more information
+-#
+-CONFIG_USB_STORAGE=y
+-# CONFIG_USB_STORAGE_DEBUG is not set
+-# CONFIG_USB_STORAGE_DATAFAB is not set
+-# CONFIG_USB_STORAGE_FREECOM is not set
+-# CONFIG_USB_STORAGE_ISD200 is not set
+-# CONFIG_USB_STORAGE_DPCM is not set
+-# CONFIG_USB_STORAGE_USBAT is not set
+-# CONFIG_USB_STORAGE_SDDR09 is not set
+-# CONFIG_USB_STORAGE_SDDR55 is not set
+-# CONFIG_USB_STORAGE_JUMPSHOT is not set
+-# CONFIG_USB_STORAGE_ALAUDA is not set
+-# CONFIG_USB_STORAGE_KARMA is not set
+-# CONFIG_USB_LIBUSUAL is not set
+-
+-#
+-# USB Imaging devices
+-#
+-# CONFIG_USB_MDC800 is not set
+-# CONFIG_USB_MICROTEK is not set
+-CONFIG_USB_MON=y
+-
+-#
+-# USB port drivers
+-#
+-# CONFIG_USB_SERIAL is not set
+-
+-#
+-# USB Miscellaneous drivers
+-#
+-# CONFIG_USB_EMI62 is not set
+-# CONFIG_USB_EMI26 is not set
+-# CONFIG_USB_ADUTUX is not set
+-# CONFIG_USB_AUERSWALD is not set
+-# CONFIG_USB_RIO500 is not set
+-# CONFIG_USB_LEGOTOWER is not set
+-# CONFIG_USB_LCD is not set
+-# CONFIG_USB_BERRY_CHARGE is not set
+-# CONFIG_USB_LED is not set
+-# CONFIG_USB_CYPRESS_CY7C63 is not set
+-# CONFIG_USB_CYTHERM is not set
+-# CONFIG_USB_PHIDGET is not set
+-# CONFIG_USB_IDMOUSE is not set
+-# CONFIG_USB_FTDI_ELAN is not set
+-# CONFIG_USB_APPLEDISPLAY is not set
+-# CONFIG_USB_SISUSBVGA is not set
+-# CONFIG_USB_LD is not set
+-# CONFIG_USB_TRANCEVIBRATOR is not set
+-# CONFIG_USB_IOWARRIOR is not set
+-# CONFIG_USB_TEST is not set
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_INFINIBAND is not set
+-# CONFIG_EDAC is not set
+-CONFIG_RTC_LIB=y
+-CONFIG_RTC_CLASS=y
+-CONFIG_RTC_HCTOSYS=y
+-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+-# CONFIG_RTC_DEBUG is not set
+-
+-#
+-# RTC interfaces
+-#
+-CONFIG_RTC_INTF_SYSFS=y
+-CONFIG_RTC_INTF_PROC=y
+-CONFIG_RTC_INTF_DEV=y
+-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+-# CONFIG_RTC_DRV_TEST is not set
+-
+-#
+-# I2C RTC drivers
+-#
+-CONFIG_RTC_DRV_DS1307=y
+-# CONFIG_RTC_DRV_DS1374 is not set
+-# CONFIG_RTC_DRV_DS1672 is not set
+-# CONFIG_RTC_DRV_MAX6900 is not set
+-# CONFIG_RTC_DRV_RS5C372 is not set
+-# CONFIG_RTC_DRV_ISL1208 is not set
+-# CONFIG_RTC_DRV_X1205 is not set
+-# CONFIG_RTC_DRV_PCF8563 is not set
+-# CONFIG_RTC_DRV_PCF8583 is not set
+-# CONFIG_RTC_DRV_M41T80 is not set
+-# CONFIG_RTC_DRV_S35390A is not set
+-
+-#
+-# SPI RTC drivers
+-#
+-# CONFIG_RTC_DRV_MAX6902 is not set
+-# CONFIG_RTC_DRV_R9701 is not set
+-# CONFIG_RTC_DRV_RS5C348 is not set
+-
+-#
+-# Platform RTC drivers
+-#
+-# CONFIG_RTC_DRV_CMOS is not set
+-# CONFIG_RTC_DRV_DS1511 is not set
+-# CONFIG_RTC_DRV_DS1553 is not set
+-# CONFIG_RTC_DRV_DS1742 is not set
+-# CONFIG_RTC_DRV_STK17TA8 is not set
+-# CONFIG_RTC_DRV_M48T86 is not set
+-# CONFIG_RTC_DRV_M48T59 is not set
+-# CONFIG_RTC_DRV_V3020 is not set
+-
+-#
+-# on-CPU RTC drivers
+-#
+-# CONFIG_DMADEVICES is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=y
+-CONFIG_EXT3_FS_XATTR=y
+-# CONFIG_EXT3_FS_POSIX_ACL is not set
+-# CONFIG_EXT3_FS_SECURITY is not set
+-# CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=y
+-CONFIG_FS_MBCACHE=y
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-CONFIG_FAT_FS=y
+-CONFIG_MSDOS_FS=y
+-CONFIG_VFAT_FS=y
+-CONFIG_FAT_DEFAULT_CODEPAGE=437
+-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-# CONFIG_JFFS2_FS is not set
+-# CONFIG_CRAMFS is not set
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-CONFIG_NFS_V3=y
+-# CONFIG_NFS_V3_ACL is not set
+-CONFIG_NFS_V4=y
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_LOCKD_V4=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-CONFIG_SUNRPC_GSS=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-CONFIG_RPCSEC_GSS_KRB5=y
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-CONFIG_PARTITION_ADVANCED=y
+-# CONFIG_ACORN_PARTITION is not set
+-# CONFIG_OSF_PARTITION is not set
+-# CONFIG_AMIGA_PARTITION is not set
+-# CONFIG_ATARI_PARTITION is not set
+-CONFIG_MAC_PARTITION=y
+-CONFIG_MSDOS_PARTITION=y
+-# CONFIG_BSD_DISKLABEL is not set
+-# CONFIG_MINIX_SUBPARTITION is not set
+-# CONFIG_SOLARIS_X86_PARTITION is not set
+-# CONFIG_UNIXWARE_DISKLABEL is not set
+-# CONFIG_LDM_PARTITION is not set
+-# CONFIG_SGI_PARTITION is not set
+-# CONFIG_ULTRIX_PARTITION is not set
+-# CONFIG_SUN_PARTITION is not set
+-# CONFIG_KARMA_PARTITION is not set
+-# CONFIG_EFI_PARTITION is not set
+-# CONFIG_SYSV68_PARTITION is not set
+-CONFIG_NLS=y
+-CONFIG_NLS_DEFAULT="iso8859-1"
+-# CONFIG_NLS_CODEPAGE_437 is not set
+-# CONFIG_NLS_CODEPAGE_737 is not set
+-# CONFIG_NLS_CODEPAGE_775 is not set
+-# CONFIG_NLS_CODEPAGE_850 is not set
+-# CONFIG_NLS_CODEPAGE_852 is not set
+-# CONFIG_NLS_CODEPAGE_855 is not set
+-# CONFIG_NLS_CODEPAGE_857 is not set
+-# CONFIG_NLS_CODEPAGE_860 is not set
+-# CONFIG_NLS_CODEPAGE_861 is not set
+-# CONFIG_NLS_CODEPAGE_862 is not set
+-# CONFIG_NLS_CODEPAGE_863 is not set
+-# CONFIG_NLS_CODEPAGE_864 is not set
+-# CONFIG_NLS_CODEPAGE_865 is not set
+-# CONFIG_NLS_CODEPAGE_866 is not set
+-# CONFIG_NLS_CODEPAGE_869 is not set
+-# CONFIG_NLS_CODEPAGE_936 is not set
+-# CONFIG_NLS_CODEPAGE_950 is not set
+-# CONFIG_NLS_CODEPAGE_932 is not set
+-# CONFIG_NLS_CODEPAGE_949 is not set
+-# CONFIG_NLS_CODEPAGE_874 is not set
+-# CONFIG_NLS_ISO8859_8 is not set
+-# CONFIG_NLS_CODEPAGE_1250 is not set
+-# CONFIG_NLS_CODEPAGE_1251 is not set
+-# CONFIG_NLS_ASCII is not set
+-# CONFIG_NLS_ISO8859_1 is not set
+-# CONFIG_NLS_ISO8859_2 is not set
+-# CONFIG_NLS_ISO8859_3 is not set
+-# CONFIG_NLS_ISO8859_4 is not set
+-# CONFIG_NLS_ISO8859_5 is not set
+-# CONFIG_NLS_ISO8859_6 is not set
+-# CONFIG_NLS_ISO8859_7 is not set
+-# CONFIG_NLS_ISO8859_9 is not set
+-# CONFIG_NLS_ISO8859_13 is not set
+-# CONFIG_NLS_ISO8859_14 is not set
+-# CONFIG_NLS_ISO8859_15 is not set
+-# CONFIG_NLS_KOI8_R is not set
+-# CONFIG_NLS_KOI8_U is not set
+-# CONFIG_NLS_UTF8 is not set
+-# CONFIG_DLM is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-# CONFIG_MAGIC_SYSRQ is not set
+-# CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
+-# CONFIG_HEADERS_CHECK is not set
+-# CONFIG_DEBUG_KERNEL is not set
+-# CONFIG_SLUB_DEBUG_ON is not set
+-# CONFIG_SLUB_STATS is not set
+-# CONFIG_DEBUG_BUGVERBOSE is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_PPC_EARLY_DEBUG is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_BLKCIPHER=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-CONFIG_CRYPTO_MANAGER=y
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-CONFIG_CRYPTO_MD5=y
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-# CONFIG_CRYPTO_ECB is not set
+-CONFIG_CRYPTO_CBC=y
+-CONFIG_CRYPTO_PCBC=m
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-CONFIG_CRYPTO_DES=y
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_TEST is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+-# CONFIG_PPC_CLOCK is not set
+--- a/arch/powerpc/configs/mpc834x_itxgp_defconfig
++++ /dev/null
+@@ -1,1222 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc6
+-# Mon Mar 24 08:48:18 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-CONFIG_6xx=y
+-# CONFIG_PPC_85xx is not set
+-# CONFIG_PPC_8xx is not set
+-# CONFIG_40x is not set
+-# CONFIG_44x is not set
+-# CONFIG_E200 is not set
+-CONFIG_PPC_FPU=y
+-# CONFIG_FSL_EMB_PERFMON is not set
+-CONFIG_PPC_STD_MMU=y
+-CONFIG_PPC_STD_MMU_32=y
+-# CONFIG_PPC_MM_SLICES is not set
+-# CONFIG_SMP is not set
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-CONFIG_DEFAULT_UIMAGE=y
+-# CONFIG_PPC_DCR_NATIVE is not set
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-# CONFIG_POSIX_MQUEUE is not set
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-# CONFIG_FAIR_GROUP_SCHED is not set
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-CONFIG_SYSFS_DEPRECATED_V2=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-# CONFIG_KALLSYMS is not set
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-# CONFIG_EPOLL is not set
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLUB_DEBUG=y
+-# CONFIG_SLAB is not set
+-CONFIG_SLUB=y
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_HAVE_KRETPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-CONFIG_MODULES=y
+-CONFIG_MODULE_UNLOAD=y
+-# CONFIG_MODULE_FORCE_UNLOAD is not set
+-# CONFIG_MODVERSIONS is not set
+-# CONFIG_MODULE_SRCVERSION_ALL is not set
+-# CONFIG_KMOD is not set
+-CONFIG_BLOCK=y
+-# CONFIG_LBD is not set
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MULTIPLATFORM is not set
+-# CONFIG_PPC_82xx is not set
+-CONFIG_PPC_83xx=y
+-# CONFIG_PPC_86xx is not set
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-CONFIG_MPC83xx=y
+-# CONFIG_MPC831x_RDB is not set
+-# CONFIG_MPC832x_MDS is not set
+-# CONFIG_MPC832x_RDB is not set
+-# CONFIG_MPC834x_MDS is not set
+-CONFIG_MPC834x_ITX=y
+-# CONFIG_MPC836x_MDS is not set
+-# CONFIG_MPC837x_MDS is not set
+-# CONFIG_MPC837x_RDB is not set
+-# CONFIG_SBC834x is not set
+-CONFIG_PPC_MPC834x=y
+-CONFIG_IPIC=y
+-# CONFIG_MPIC is not set
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-# CONFIG_FSL_ULI1575 is not set
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-CONFIG_TICK_ONESHOT=y
+-CONFIG_NO_HZ=y
+-CONFIG_HIGH_RES_TIMERS=y
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_BINFMT_ELF=y
+-# CONFIG_BINFMT_MISC is not set
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_RESOURCES_64BIT is not set
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-CONFIG_PROC_DEVICETREE=y
+-# CONFIG_CMDLINE_BOOL is not set
+-# CONFIG_PM is not set
+-CONFIG_SECCOMP=y
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_GENERIC_ISA_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_FSL_SOC=y
+-CONFIG_PCI=y
+-CONFIG_PCI_DOMAINS=y
+-CONFIG_PCI_SYSCALL=y
+-# CONFIG_PCIEPORTBUS is not set
+-CONFIG_ARCH_SUPPORTS_MSI=y
+-# CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
+-# CONFIG_PCCARD is not set
+-# CONFIG_HOTPLUG_PCI is not set
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_BOOT_LOAD=0x00800000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-CONFIG_XFRM=y
+-# CONFIG_XFRM_USER is not set
+-# CONFIG_XFRM_SUB_POLICY is not set
+-# CONFIG_XFRM_MIGRATE is not set
+-# CONFIG_XFRM_STATISTICS is not set
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-CONFIG_IP_MULTICAST=y
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_IP_MROUTE is not set
+-# CONFIG_ARPD is not set
+-CONFIG_SYN_COOKIES=y
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-CONFIG_INET_XFRM_MODE_TRANSPORT=y
+-CONFIG_INET_XFRM_MODE_TUNNEL=y
+-CONFIG_INET_XFRM_MODE_BEET=y
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-# CONFIG_FW_LOADER is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-# CONFIG_CONNECTOR is not set
+-CONFIG_MTD=y
+-# CONFIG_MTD_DEBUG is not set
+-# CONFIG_MTD_CONCAT is not set
+-# CONFIG_MTD_PARTITIONS is not set
+-
+-#
+-# User Modules And Translation Layers
+-#
+-CONFIG_MTD_CHAR=y
+-# CONFIG_MTD_BLKDEVS is not set
+-# CONFIG_MTD_BLOCK is not set
+-# CONFIG_MTD_BLOCK_RO is not set
+-# CONFIG_FTL is not set
+-# CONFIG_NFTL is not set
+-# CONFIG_INFTL is not set
+-# CONFIG_RFD_FTL is not set
+-# CONFIG_SSFDC is not set
+-# CONFIG_MTD_OOPS is not set
+-
+-#
+-# RAM/ROM/Flash chip drivers
+-#
+-CONFIG_MTD_CFI=y
+-# CONFIG_MTD_JEDECPROBE is not set
+-CONFIG_MTD_GEN_PROBE=y
+-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+-CONFIG_MTD_MAP_BANK_WIDTH_1=y
+-CONFIG_MTD_MAP_BANK_WIDTH_2=y
+-CONFIG_MTD_MAP_BANK_WIDTH_4=y
+-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+-CONFIG_MTD_CFI_I1=y
+-CONFIG_MTD_CFI_I2=y
+-# CONFIG_MTD_CFI_I4 is not set
+-# CONFIG_MTD_CFI_I8 is not set
+-# CONFIG_MTD_CFI_INTELEXT is not set
+-CONFIG_MTD_CFI_AMDSTD=y
+-# CONFIG_MTD_CFI_STAA is not set
+-CONFIG_MTD_CFI_UTIL=y
+-# CONFIG_MTD_RAM is not set
+-# CONFIG_MTD_ROM is not set
+-# CONFIG_MTD_ABSENT is not set
+-
+-#
+-# Mapping drivers for chip access
+-#
+-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+-CONFIG_MTD_PHYSMAP=y
+-CONFIG_MTD_PHYSMAP_START=0xfe000000
+-CONFIG_MTD_PHYSMAP_LEN=0x800000
+-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+-# CONFIG_MTD_PHYSMAP_OF is not set
+-# CONFIG_MTD_INTEL_VR_NOR is not set
+-# CONFIG_MTD_PLATRAM is not set
+-
+-#
+-# Self-contained MTD device drivers
+-#
+-# CONFIG_MTD_PMC551 is not set
+-# CONFIG_MTD_DATAFLASH is not set
+-# CONFIG_MTD_M25P80 is not set
+-# CONFIG_MTD_SLRAM is not set
+-# CONFIG_MTD_PHRAM is not set
+-# CONFIG_MTD_MTDRAM is not set
+-# CONFIG_MTD_BLOCK2MTD is not set
+-
+-#
+-# Disk-On-Chip Device Drivers
+-#
+-# CONFIG_MTD_DOC2000 is not set
+-# CONFIG_MTD_DOC2001 is not set
+-# CONFIG_MTD_DOC2001PLUS is not set
+-# CONFIG_MTD_NAND is not set
+-# CONFIG_MTD_ONENAND is not set
+-
+-#
+-# UBI - Unsorted block images
+-#
+-# CONFIG_MTD_UBI is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_CPQ_DA is not set
+-# CONFIG_BLK_CPQ_CISS_DA is not set
+-# CONFIG_BLK_DEV_DAC960 is not set
+-# CONFIG_BLK_DEV_UMEM is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-CONFIG_BLK_DEV_LOOP=y
+-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-# CONFIG_BLK_DEV_SX8 is not set
+-# CONFIG_BLK_DEV_UB is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=32768
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_PHANTOM is not set
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_SGI_IOC4 is not set
+-# CONFIG_TIFM_CORE is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-# CONFIG_IDE is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-CONFIG_SCSI=y
+-CONFIG_SCSI_DMA=y
+-# CONFIG_SCSI_TGT is not set
+-# CONFIG_SCSI_NETLINK is not set
+-CONFIG_SCSI_PROC_FS=y
+-
+-#
+-# SCSI support type (disk, tape, CD-ROM)
+-#
+-CONFIG_BLK_DEV_SD=y
+-# CONFIG_CHR_DEV_ST is not set
+-# CONFIG_CHR_DEV_OSST is not set
+-# CONFIG_BLK_DEV_SR is not set
+-CONFIG_CHR_DEV_SG=y
+-# CONFIG_CHR_DEV_SCH is not set
+-
+-#
+-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+-#
+-# CONFIG_SCSI_MULTI_LUN is not set
+-# CONFIG_SCSI_CONSTANTS is not set
+-# CONFIG_SCSI_LOGGING is not set
+-# CONFIG_SCSI_SCAN_ASYNC is not set
+-CONFIG_SCSI_WAIT_SCAN=m
+-
+-#
+-# SCSI Transports
+-#
+-CONFIG_SCSI_SPI_ATTRS=y
+-# CONFIG_SCSI_FC_ATTRS is not set
+-# CONFIG_SCSI_ISCSI_ATTRS is not set
+-# CONFIG_SCSI_SAS_LIBSAS is not set
+-# CONFIG_SCSI_SRP_ATTRS is not set
+-CONFIG_SCSI_LOWLEVEL=y
+-# CONFIG_ISCSI_TCP is not set
+-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+-# CONFIG_SCSI_3W_9XXX is not set
+-# CONFIG_SCSI_ACARD is not set
+-# CONFIG_SCSI_AACRAID is not set
+-# CONFIG_SCSI_AIC7XXX is not set
+-# CONFIG_SCSI_AIC7XXX_OLD is not set
+-# CONFIG_SCSI_AIC79XX is not set
+-# CONFIG_SCSI_AIC94XX is not set
+-# CONFIG_SCSI_DPT_I2O is not set
+-# CONFIG_SCSI_ADVANSYS is not set
+-# CONFIG_SCSI_ARCMSR is not set
+-# CONFIG_MEGARAID_NEWGEN is not set
+-# CONFIG_MEGARAID_LEGACY is not set
+-# CONFIG_MEGARAID_SAS is not set
+-# CONFIG_SCSI_HPTIOP is not set
+-# CONFIG_SCSI_BUSLOGIC is not set
+-# CONFIG_SCSI_DMX3191D is not set
+-# CONFIG_SCSI_EATA is not set
+-# CONFIG_SCSI_FUTURE_DOMAIN is not set
+-# CONFIG_SCSI_GDTH is not set
+-# CONFIG_SCSI_IPS is not set
+-# CONFIG_SCSI_INITIO is not set
+-# CONFIG_SCSI_INIA100 is not set
+-# CONFIG_SCSI_MVSAS is not set
+-# CONFIG_SCSI_STEX is not set
+-# CONFIG_SCSI_SYM53C8XX_2 is not set
+-# CONFIG_SCSI_QLOGIC_1280 is not set
+-# CONFIG_SCSI_QLA_FC is not set
+-# CONFIG_SCSI_QLA_ISCSI is not set
+-# CONFIG_SCSI_LPFC is not set
+-# CONFIG_SCSI_DC395x is not set
+-# CONFIG_SCSI_DC390T is not set
+-# CONFIG_SCSI_NSP32 is not set
+-# CONFIG_SCSI_DEBUG is not set
+-# CONFIG_SCSI_SRP is not set
+-# CONFIG_ATA is not set
+-# CONFIG_MD is not set
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-# CONFIG_FIREWIRE is not set
+-# CONFIG_IEEE1394 is not set
+-# CONFIG_I2O is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_ARCNET is not set
+-CONFIG_PHYLIB=y
+-
+-#
+-# MII PHY device drivers
+-#
+-# CONFIG_MARVELL_PHY is not set
+-# CONFIG_DAVICOM_PHY is not set
+-# CONFIG_QSEMI_PHY is not set
+-# CONFIG_LXT_PHY is not set
+-CONFIG_CICADA_PHY=y
+-# CONFIG_VITESSE_PHY is not set
+-# CONFIG_SMSC_PHY is not set
+-# CONFIG_BROADCOM_PHY is not set
+-# CONFIG_ICPLUS_PHY is not set
+-# CONFIG_REALTEK_PHY is not set
+-# CONFIG_FIXED_PHY is not set
+-# CONFIG_MDIO_BITBANG is not set
+-# CONFIG_NET_ETHERNET is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_ACENIC is not set
+-# CONFIG_DL2K is not set
+-# CONFIG_E1000 is not set
+-# CONFIG_E1000E is not set
+-# CONFIG_E1000E_ENABLED is not set
+-# CONFIG_IP1000 is not set
+-# CONFIG_IGB is not set
+-# CONFIG_NS83820 is not set
+-# CONFIG_HAMACHI is not set
+-# CONFIG_YELLOWFIN is not set
+-# CONFIG_R8169 is not set
+-# CONFIG_SIS190 is not set
+-# CONFIG_SKGE is not set
+-# CONFIG_SKY2 is not set
+-# CONFIG_SK98LIN is not set
+-# CONFIG_VIA_VELOCITY is not set
+-# CONFIG_TIGON3 is not set
+-# CONFIG_BNX2 is not set
+-CONFIG_GIANFAR=y
+-CONFIG_GFAR_NAPI=y
+-# CONFIG_QLA3XXX is not set
+-# CONFIG_ATL1 is not set
+-CONFIG_NETDEV_10000=y
+-# CONFIG_CHELSIO_T1 is not set
+-# CONFIG_CHELSIO_T3 is not set
+-# CONFIG_IXGBE is not set
+-# CONFIG_IXGB is not set
+-# CONFIG_S2IO is not set
+-# CONFIG_MYRI10GE is not set
+-# CONFIG_NETXEN_NIC is not set
+-# CONFIG_NIU is not set
+-# CONFIG_MLX4_CORE is not set
+-# CONFIG_TEHUTI is not set
+-# CONFIG_BNX2X is not set
+-# CONFIG_TR is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-
+-#
+-# USB Network Adapters
+-#
+-# CONFIG_USB_CATC is not set
+-# CONFIG_USB_KAWETH is not set
+-# CONFIG_USB_PEGASUS is not set
+-# CONFIG_USB_RTL8150 is not set
+-# CONFIG_USB_USBNET is not set
+-# CONFIG_WAN is not set
+-# CONFIG_FDDI is not set
+-# CONFIG_HIPPI is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NET_FC is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-# CONFIG_INPUT is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-# CONFIG_NOZOMI is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-# CONFIG_SERIAL_8250_PCI is not set
+-CONFIG_SERIAL_8250_NR_UARTS=4
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-# CONFIG_SERIAL_8250_EXTENDED is not set
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_JSM is not set
+-# CONFIG_SERIAL_OF_PLATFORM is not set
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-CONFIG_HW_RANDOM=y
+-# CONFIG_NVRAM is not set
+-# CONFIG_GEN_RTC is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_APPLICOM is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_DEVPORT=y
+-CONFIG_I2C=y
+-CONFIG_I2C_BOARDINFO=y
+-CONFIG_I2C_CHARDEV=y
+-
+-#
+-# I2C Algorithms
+-#
+-# CONFIG_I2C_ALGOBIT is not set
+-# CONFIG_I2C_ALGOPCF is not set
+-# CONFIG_I2C_ALGOPCA is not set
+-
+-#
+-# I2C Hardware Bus support
+-#
+-# CONFIG_I2C_ALI1535 is not set
+-# CONFIG_I2C_ALI1563 is not set
+-# CONFIG_I2C_ALI15X3 is not set
+-# CONFIG_I2C_AMD756 is not set
+-# CONFIG_I2C_AMD8111 is not set
+-# CONFIG_I2C_I801 is not set
+-# CONFIG_I2C_I810 is not set
+-# CONFIG_I2C_PIIX4 is not set
+-CONFIG_I2C_MPC=y
+-# CONFIG_I2C_NFORCE2 is not set
+-# CONFIG_I2C_OCORES is not set
+-# CONFIG_I2C_PARPORT_LIGHT is not set
+-# CONFIG_I2C_PROSAVAGE is not set
+-# CONFIG_I2C_SAVAGE4 is not set
+-# CONFIG_I2C_SIMTEC is not set
+-# CONFIG_I2C_SIS5595 is not set
+-# CONFIG_I2C_SIS630 is not set
+-# CONFIG_I2C_SIS96X is not set
+-# CONFIG_I2C_TAOS_EVM is not set
+-# CONFIG_I2C_STUB is not set
+-# CONFIG_I2C_TINY_USB is not set
+-# CONFIG_I2C_VIA is not set
+-# CONFIG_I2C_VIAPRO is not set
+-# CONFIG_I2C_VOODOO3 is not set
+-
+-#
+-# Miscellaneous I2C Chip support
+-#
+-# CONFIG_DS1682 is not set
+-# CONFIG_SENSORS_EEPROM is not set
+-CONFIG_SENSORS_PCF8574=y
+-# CONFIG_PCF8575 is not set
+-# CONFIG_SENSORS_PCF8591 is not set
+-# CONFIG_TPS65010 is not set
+-# CONFIG_SENSORS_MAX6875 is not set
+-# CONFIG_SENSORS_TSL2550 is not set
+-# CONFIG_I2C_DEBUG_CORE is not set
+-# CONFIG_I2C_DEBUG_ALGO is not set
+-# CONFIG_I2C_DEBUG_BUS is not set
+-# CONFIG_I2C_DEBUG_CHIP is not set
+-
+-#
+-# SPI support
+-#
+-CONFIG_SPI=y
+-CONFIG_SPI_MASTER=y
+-
+-#
+-# SPI Master Controller Drivers
+-#
+-CONFIG_SPI_BITBANG=y
+-CONFIG_SPI_MPC83xx=y
+-
+-#
+-# SPI Protocol Masters
+-#
+-# CONFIG_SPI_AT25 is not set
+-# CONFIG_SPI_SPIDEV is not set
+-# CONFIG_SPI_TLE62X0 is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-# CONFIG_HWMON is not set
+-# CONFIG_THERMAL is not set
+-CONFIG_WATCHDOG=y
+-# CONFIG_WATCHDOG_NOWAYOUT is not set
+-
+-#
+-# Watchdog Device Drivers
+-#
+-# CONFIG_SOFT_WATCHDOG is not set
+-CONFIG_83xx_WDT=y
+-
+-#
+-# PCI-based Watchdog Cards
+-#
+-# CONFIG_PCIPCWATCHDOG is not set
+-# CONFIG_WDTPCI is not set
+-
+-#
+-# USB-based Watchdog Cards
+-#
+-# CONFIG_USBPCWATCHDOG is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-CONFIG_DAB=y
+-# CONFIG_USB_DABUSB is not set
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_AGP is not set
+-# CONFIG_DRM is not set
+-# CONFIG_VGASTATE is not set
+-CONFIG_VIDEO_OUTPUT_CONTROL=m
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-CONFIG_USB_SUPPORT=y
+-CONFIG_USB_ARCH_HAS_HCD=y
+-CONFIG_USB_ARCH_HAS_OHCI=y
+-CONFIG_USB_ARCH_HAS_EHCI=y
+-CONFIG_USB=y
+-# CONFIG_USB_DEBUG is not set
+-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+-
+-#
+-# Miscellaneous USB options
+-#
+-# CONFIG_USB_DEVICEFS is not set
+-CONFIG_USB_DEVICE_CLASS=y
+-# CONFIG_USB_DYNAMIC_MINORS is not set
+-# CONFIG_USB_OTG is not set
+-
+-#
+-# USB Host Controller Drivers
+-#
+-CONFIG_USB_EHCI_HCD=y
+-CONFIG_USB_EHCI_ROOT_HUB_TT=y
+-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+-CONFIG_USB_EHCI_FSL=y
+-CONFIG_USB_EHCI_HCD_PPC_OF=y
+-# CONFIG_USB_ISP116X_HCD is not set
+-# CONFIG_USB_OHCI_HCD is not set
+-CONFIG_USB_UHCI_HCD=y
+-# CONFIG_USB_SL811_HCD is not set
+-# CONFIG_USB_R8A66597_HCD is not set
+-
+-#
+-# USB Device Class drivers
+-#
+-# CONFIG_USB_ACM is not set
+-# CONFIG_USB_PRINTER is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-
+-#
+-# may also be needed; see USB_STORAGE Help for more information
+-#
+-CONFIG_USB_STORAGE=y
+-# CONFIG_USB_STORAGE_DEBUG is not set
+-# CONFIG_USB_STORAGE_DATAFAB is not set
+-# CONFIG_USB_STORAGE_FREECOM is not set
+-# CONFIG_USB_STORAGE_ISD200 is not set
+-# CONFIG_USB_STORAGE_DPCM is not set
+-# CONFIG_USB_STORAGE_USBAT is not set
+-# CONFIG_USB_STORAGE_SDDR09 is not set
+-# CONFIG_USB_STORAGE_SDDR55 is not set
+-# CONFIG_USB_STORAGE_JUMPSHOT is not set
+-# CONFIG_USB_STORAGE_ALAUDA is not set
+-# CONFIG_USB_STORAGE_KARMA is not set
+-# CONFIG_USB_LIBUSUAL is not set
+-
+-#
+-# USB Imaging devices
+-#
+-# CONFIG_USB_MDC800 is not set
+-# CONFIG_USB_MICROTEK is not set
+-CONFIG_USB_MON=y
+-
+-#
+-# USB port drivers
+-#
+-# CONFIG_USB_SERIAL is not set
+-
+-#
+-# USB Miscellaneous drivers
+-#
+-# CONFIG_USB_EMI62 is not set
+-# CONFIG_USB_EMI26 is not set
+-# CONFIG_USB_ADUTUX is not set
+-# CONFIG_USB_AUERSWALD is not set
+-# CONFIG_USB_RIO500 is not set
+-# CONFIG_USB_LEGOTOWER is not set
+-# CONFIG_USB_LCD is not set
+-# CONFIG_USB_BERRY_CHARGE is not set
+-# CONFIG_USB_LED is not set
+-# CONFIG_USB_CYPRESS_CY7C63 is not set
+-# CONFIG_USB_CYTHERM is not set
+-# CONFIG_USB_PHIDGET is not set
+-# CONFIG_USB_IDMOUSE is not set
+-# CONFIG_USB_FTDI_ELAN is not set
+-# CONFIG_USB_APPLEDISPLAY is not set
+-# CONFIG_USB_SISUSBVGA is not set
+-# CONFIG_USB_LD is not set
+-# CONFIG_USB_TRANCEVIBRATOR is not set
+-# CONFIG_USB_IOWARRIOR is not set
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_INFINIBAND is not set
+-# CONFIG_EDAC is not set
+-CONFIG_RTC_LIB=y
+-CONFIG_RTC_CLASS=y
+-CONFIG_RTC_HCTOSYS=y
+-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+-# CONFIG_RTC_DEBUG is not set
+-
+-#
+-# RTC interfaces
+-#
+-CONFIG_RTC_INTF_SYSFS=y
+-CONFIG_RTC_INTF_PROC=y
+-CONFIG_RTC_INTF_DEV=y
+-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+-# CONFIG_RTC_DRV_TEST is not set
+-
+-#
+-# I2C RTC drivers
+-#
+-CONFIG_RTC_DRV_DS1307=y
+-# CONFIG_RTC_DRV_DS1374 is not set
+-# CONFIG_RTC_DRV_DS1672 is not set
+-# CONFIG_RTC_DRV_MAX6900 is not set
+-# CONFIG_RTC_DRV_RS5C372 is not set
+-# CONFIG_RTC_DRV_ISL1208 is not set
+-# CONFIG_RTC_DRV_X1205 is not set
+-# CONFIG_RTC_DRV_PCF8563 is not set
+-# CONFIG_RTC_DRV_PCF8583 is not set
+-# CONFIG_RTC_DRV_M41T80 is not set
+-# CONFIG_RTC_DRV_S35390A is not set
+-
+-#
+-# SPI RTC drivers
+-#
+-# CONFIG_RTC_DRV_MAX6902 is not set
+-# CONFIG_RTC_DRV_R9701 is not set
+-# CONFIG_RTC_DRV_RS5C348 is not set
+-
+-#
+-# Platform RTC drivers
+-#
+-# CONFIG_RTC_DRV_CMOS is not set
+-# CONFIG_RTC_DRV_DS1511 is not set
+-# CONFIG_RTC_DRV_DS1553 is not set
+-# CONFIG_RTC_DRV_DS1742 is not set
+-# CONFIG_RTC_DRV_STK17TA8 is not set
+-# CONFIG_RTC_DRV_M48T86 is not set
+-# CONFIG_RTC_DRV_M48T59 is not set
+-# CONFIG_RTC_DRV_V3020 is not set
+-
+-#
+-# on-CPU RTC drivers
+-#
+-# CONFIG_DMADEVICES is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=y
+-CONFIG_EXT3_FS_XATTR=y
+-# CONFIG_EXT3_FS_POSIX_ACL is not set
+-# CONFIG_EXT3_FS_SECURITY is not set
+-# CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=y
+-CONFIG_FS_MBCACHE=y
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-CONFIG_FAT_FS=y
+-CONFIG_MSDOS_FS=y
+-CONFIG_VFAT_FS=y
+-CONFIG_FAT_DEFAULT_CODEPAGE=437
+-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-# CONFIG_JFFS2_FS is not set
+-# CONFIG_CRAMFS is not set
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-CONFIG_NFS_V3=y
+-# CONFIG_NFS_V3_ACL is not set
+-CONFIG_NFS_V4=y
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_LOCKD_V4=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-CONFIG_SUNRPC_GSS=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-CONFIG_RPCSEC_GSS_KRB5=y
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-CONFIG_PARTITION_ADVANCED=y
+-# CONFIG_ACORN_PARTITION is not set
+-# CONFIG_OSF_PARTITION is not set
+-# CONFIG_AMIGA_PARTITION is not set
+-# CONFIG_ATARI_PARTITION is not set
+-CONFIG_MAC_PARTITION=y
+-CONFIG_MSDOS_PARTITION=y
+-# CONFIG_BSD_DISKLABEL is not set
+-# CONFIG_MINIX_SUBPARTITION is not set
+-# CONFIG_SOLARIS_X86_PARTITION is not set
+-# CONFIG_UNIXWARE_DISKLABEL is not set
+-# CONFIG_LDM_PARTITION is not set
+-# CONFIG_SGI_PARTITION is not set
+-# CONFIG_ULTRIX_PARTITION is not set
+-# CONFIG_SUN_PARTITION is not set
+-# CONFIG_KARMA_PARTITION is not set
+-# CONFIG_EFI_PARTITION is not set
+-# CONFIG_SYSV68_PARTITION is not set
+-CONFIG_NLS=y
+-CONFIG_NLS_DEFAULT="iso8859-1"
+-# CONFIG_NLS_CODEPAGE_437 is not set
+-# CONFIG_NLS_CODEPAGE_737 is not set
+-# CONFIG_NLS_CODEPAGE_775 is not set
+-# CONFIG_NLS_CODEPAGE_850 is not set
+-# CONFIG_NLS_CODEPAGE_852 is not set
+-# CONFIG_NLS_CODEPAGE_855 is not set
+-# CONFIG_NLS_CODEPAGE_857 is not set
+-# CONFIG_NLS_CODEPAGE_860 is not set
+-# CONFIG_NLS_CODEPAGE_861 is not set
+-# CONFIG_NLS_CODEPAGE_862 is not set
+-# CONFIG_NLS_CODEPAGE_863 is not set
+-# CONFIG_NLS_CODEPAGE_864 is not set
+-# CONFIG_NLS_CODEPAGE_865 is not set
+-# CONFIG_NLS_CODEPAGE_866 is not set
+-# CONFIG_NLS_CODEPAGE_869 is not set
+-# CONFIG_NLS_CODEPAGE_936 is not set
+-# CONFIG_NLS_CODEPAGE_950 is not set
+-# CONFIG_NLS_CODEPAGE_932 is not set
+-# CONFIG_NLS_CODEPAGE_949 is not set
+-# CONFIG_NLS_CODEPAGE_874 is not set
+-# CONFIG_NLS_ISO8859_8 is not set
+-# CONFIG_NLS_CODEPAGE_1250 is not set
+-# CONFIG_NLS_CODEPAGE_1251 is not set
+-# CONFIG_NLS_ASCII is not set
+-# CONFIG_NLS_ISO8859_1 is not set
+-# CONFIG_NLS_ISO8859_2 is not set
+-# CONFIG_NLS_ISO8859_3 is not set
+-# CONFIG_NLS_ISO8859_4 is not set
+-# CONFIG_NLS_ISO8859_5 is not set
+-# CONFIG_NLS_ISO8859_6 is not set
+-# CONFIG_NLS_ISO8859_7 is not set
+-# CONFIG_NLS_ISO8859_9 is not set
+-# CONFIG_NLS_ISO8859_13 is not set
+-# CONFIG_NLS_ISO8859_14 is not set
+-# CONFIG_NLS_ISO8859_15 is not set
+-# CONFIG_NLS_KOI8_R is not set
+-# CONFIG_NLS_KOI8_U is not set
+-# CONFIG_NLS_UTF8 is not set
+-# CONFIG_DLM is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-# CONFIG_MAGIC_SYSRQ is not set
+-# CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
+-# CONFIG_HEADERS_CHECK is not set
+-# CONFIG_DEBUG_KERNEL is not set
+-# CONFIG_SLUB_DEBUG_ON is not set
+-# CONFIG_SLUB_STATS is not set
+-# CONFIG_DEBUG_BUGVERBOSE is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_PPC_EARLY_DEBUG is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_BLKCIPHER=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-CONFIG_CRYPTO_MANAGER=y
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-CONFIG_CRYPTO_MD5=y
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-# CONFIG_CRYPTO_ECB is not set
+-CONFIG_CRYPTO_CBC=y
+-CONFIG_CRYPTO_PCBC=m
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-CONFIG_CRYPTO_DES=y
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_TEST is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+-# CONFIG_PPC_CLOCK is not set
+--- a/arch/powerpc/configs/mpc834x_mds_defconfig
++++ /dev/null
+@@ -1,1021 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc7
+-# Mon Mar 31 11:36:56 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-CONFIG_6xx=y
+-# CONFIG_PPC_85xx is not set
+-# CONFIG_PPC_8xx is not set
+-# CONFIG_40x is not set
+-# CONFIG_44x is not set
+-# CONFIG_E200 is not set
+-CONFIG_PPC_FPU=y
+-# CONFIG_FSL_EMB_PERFMON is not set
+-CONFIG_PPC_STD_MMU=y
+-CONFIG_PPC_STD_MMU_32=y
+-# CONFIG_PPC_MM_SLICES is not set
+-# CONFIG_SMP is not set
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-CONFIG_DEFAULT_UIMAGE=y
+-# CONFIG_PPC_DCR_NATIVE is not set
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-# CONFIG_POSIX_MQUEUE is not set
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-# CONFIG_FAIR_GROUP_SCHED is not set
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-CONFIG_SYSFS_DEPRECATED_V2=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-# CONFIG_KALLSYMS is not set
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-# CONFIG_EPOLL is not set
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLUB_DEBUG=y
+-# CONFIG_SLAB is not set
+-CONFIG_SLUB=y
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_HAVE_KRETPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-CONFIG_MODULES=y
+-CONFIG_MODULE_UNLOAD=y
+-# CONFIG_MODULE_FORCE_UNLOAD is not set
+-# CONFIG_MODVERSIONS is not set
+-# CONFIG_MODULE_SRCVERSION_ALL is not set
+-# CONFIG_KMOD is not set
+-CONFIG_BLOCK=y
+-# CONFIG_LBD is not set
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MULTIPLATFORM is not set
+-# CONFIG_PPC_82xx is not set
+-CONFIG_PPC_83xx=y
+-# CONFIG_PPC_86xx is not set
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-CONFIG_MPC83xx=y
+-# CONFIG_MPC831x_RDB is not set
+-# CONFIG_MPC832x_MDS is not set
+-# CONFIG_MPC832x_RDB is not set
+-CONFIG_MPC834x_MDS=y
+-# CONFIG_MPC834x_ITX is not set
+-# CONFIG_MPC836x_MDS is not set
+-# CONFIG_MPC837x_MDS is not set
+-# CONFIG_MPC837x_RDB is not set
+-# CONFIG_SBC834x is not set
+-CONFIG_PPC_MPC834x=y
+-CONFIG_IPIC=y
+-# CONFIG_MPIC is not set
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-# CONFIG_FSL_ULI1575 is not set
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-CONFIG_TICK_ONESHOT=y
+-CONFIG_NO_HZ=y
+-CONFIG_HIGH_RES_TIMERS=y
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_BINFMT_ELF=y
+-# CONFIG_BINFMT_MISC is not set
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_RESOURCES_64BIT is not set
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-CONFIG_PROC_DEVICETREE=y
+-# CONFIG_CMDLINE_BOOL is not set
+-# CONFIG_PM is not set
+-CONFIG_SECCOMP=y
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_GENERIC_ISA_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_FSL_SOC=y
+-CONFIG_PCI=y
+-CONFIG_PCI_DOMAINS=y
+-CONFIG_PCI_SYSCALL=y
+-# CONFIG_PCIEPORTBUS is not set
+-CONFIG_ARCH_SUPPORTS_MSI=y
+-# CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
+-# CONFIG_PCCARD is not set
+-# CONFIG_HOTPLUG_PCI is not set
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_BOOT_LOAD=0x00800000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-CONFIG_XFRM=y
+-CONFIG_XFRM_USER=m
+-# CONFIG_XFRM_SUB_POLICY is not set
+-# CONFIG_XFRM_MIGRATE is not set
+-# CONFIG_XFRM_STATISTICS is not set
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-CONFIG_IP_MULTICAST=y
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_IP_MROUTE is not set
+-# CONFIG_ARPD is not set
+-CONFIG_SYN_COOKIES=y
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-CONFIG_INET_XFRM_MODE_TRANSPORT=y
+-CONFIG_INET_XFRM_MODE_TUNNEL=y
+-CONFIG_INET_XFRM_MODE_BEET=y
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-# CONFIG_FW_LOADER is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-# CONFIG_CONNECTOR is not set
+-# CONFIG_MTD is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_CPQ_DA is not set
+-# CONFIG_BLK_CPQ_CISS_DA is not set
+-# CONFIG_BLK_DEV_DAC960 is not set
+-# CONFIG_BLK_DEV_UMEM is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-CONFIG_BLK_DEV_LOOP=y
+-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-# CONFIG_BLK_DEV_SX8 is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=32768
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_PHANTOM is not set
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_SGI_IOC4 is not set
+-# CONFIG_TIFM_CORE is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-# CONFIG_IDE is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-# CONFIG_SCSI is not set
+-# CONFIG_SCSI_DMA is not set
+-# CONFIG_SCSI_NETLINK is not set
+-# CONFIG_ATA is not set
+-# CONFIG_MD is not set
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-# CONFIG_FIREWIRE is not set
+-# CONFIG_IEEE1394 is not set
+-# CONFIG_I2O is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_ARCNET is not set
+-CONFIG_PHYLIB=y
+-
+-#
+-# MII PHY device drivers
+-#
+-CONFIG_MARVELL_PHY=y
+-# CONFIG_DAVICOM_PHY is not set
+-# CONFIG_QSEMI_PHY is not set
+-# CONFIG_LXT_PHY is not set
+-# CONFIG_CICADA_PHY is not set
+-# CONFIG_VITESSE_PHY is not set
+-# CONFIG_SMSC_PHY is not set
+-# CONFIG_BROADCOM_PHY is not set
+-# CONFIG_ICPLUS_PHY is not set
+-# CONFIG_REALTEK_PHY is not set
+-# CONFIG_FIXED_PHY is not set
+-# CONFIG_MDIO_BITBANG is not set
+-CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
+-# CONFIG_HAPPYMEAL is not set
+-# CONFIG_SUNGEM is not set
+-# CONFIG_CASSINI is not set
+-# CONFIG_NET_VENDOR_3COM is not set
+-# CONFIG_NET_TULIP is not set
+-# CONFIG_HP100 is not set
+-# CONFIG_IBM_NEW_EMAC_ZMII is not set
+-# CONFIG_IBM_NEW_EMAC_RGMII is not set
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-CONFIG_NET_PCI=y
+-# CONFIG_PCNET32 is not set
+-# CONFIG_AMD8111_ETH is not set
+-# CONFIG_ADAPTEC_STARFIRE is not set
+-# CONFIG_B44 is not set
+-# CONFIG_FORCEDETH is not set
+-# CONFIG_EEPRO100 is not set
+-CONFIG_E100=y
+-# CONFIG_FEALNX is not set
+-# CONFIG_NATSEMI is not set
+-# CONFIG_NE2K_PCI is not set
+-# CONFIG_8139CP is not set
+-# CONFIG_8139TOO is not set
+-# CONFIG_R6040 is not set
+-# CONFIG_SIS900 is not set
+-# CONFIG_EPIC100 is not set
+-# CONFIG_SUNDANCE is not set
+-# CONFIG_TLAN is not set
+-# CONFIG_VIA_RHINE is not set
+-# CONFIG_SC92031 is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_ACENIC is not set
+-# CONFIG_DL2K is not set
+-# CONFIG_E1000 is not set
+-# CONFIG_E1000E is not set
+-# CONFIG_E1000E_ENABLED is not set
+-# CONFIG_IP1000 is not set
+-# CONFIG_IGB is not set
+-# CONFIG_NS83820 is not set
+-# CONFIG_HAMACHI is not set
+-# CONFIG_YELLOWFIN is not set
+-# CONFIG_R8169 is not set
+-# CONFIG_SIS190 is not set
+-# CONFIG_SKGE is not set
+-# CONFIG_SKY2 is not set
+-# CONFIG_SK98LIN is not set
+-# CONFIG_VIA_VELOCITY is not set
+-# CONFIG_TIGON3 is not set
+-# CONFIG_BNX2 is not set
+-CONFIG_GIANFAR=y
+-# CONFIG_GFAR_NAPI is not set
+-# CONFIG_QLA3XXX is not set
+-# CONFIG_ATL1 is not set
+-CONFIG_NETDEV_10000=y
+-# CONFIG_CHELSIO_T1 is not set
+-# CONFIG_CHELSIO_T3 is not set
+-# CONFIG_IXGBE is not set
+-# CONFIG_IXGB is not set
+-# CONFIG_S2IO is not set
+-# CONFIG_MYRI10GE is not set
+-# CONFIG_NETXEN_NIC is not set
+-# CONFIG_NIU is not set
+-# CONFIG_MLX4_CORE is not set
+-# CONFIG_TEHUTI is not set
+-# CONFIG_BNX2X is not set
+-# CONFIG_TR is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-# CONFIG_WAN is not set
+-# CONFIG_FDDI is not set
+-# CONFIG_HIPPI is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-CONFIG_INPUT=y
+-# CONFIG_INPUT_FF_MEMLESS is not set
+-# CONFIG_INPUT_POLLDEV is not set
+-
+-#
+-# Userland interfaces
+-#
+-# CONFIG_INPUT_MOUSEDEV is not set
+-# CONFIG_INPUT_JOYDEV is not set
+-# CONFIG_INPUT_EVDEV is not set
+-# CONFIG_INPUT_EVBUG is not set
+-
+-#
+-# Input Device Drivers
+-#
+-# CONFIG_INPUT_KEYBOARD is not set
+-# CONFIG_INPUT_MOUSE is not set
+-# CONFIG_INPUT_JOYSTICK is not set
+-# CONFIG_INPUT_TABLET is not set
+-# CONFIG_INPUT_TOUCHSCREEN is not set
+-# CONFIG_INPUT_MISC is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-# CONFIG_NOZOMI is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-CONFIG_SERIAL_8250_PCI=y
+-CONFIG_SERIAL_8250_NR_UARTS=4
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-# CONFIG_SERIAL_8250_EXTENDED is not set
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_JSM is not set
+-# CONFIG_SERIAL_OF_PLATFORM is not set
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-# CONFIG_HW_RANDOM is not set
+-# CONFIG_NVRAM is not set
+-# CONFIG_GEN_RTC is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_APPLICOM is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_DEVPORT=y
+-CONFIG_I2C=y
+-CONFIG_I2C_BOARDINFO=y
+-CONFIG_I2C_CHARDEV=y
+-
+-#
+-# I2C Algorithms
+-#
+-# CONFIG_I2C_ALGOBIT is not set
+-# CONFIG_I2C_ALGOPCF is not set
+-# CONFIG_I2C_ALGOPCA is not set
+-
+-#
+-# I2C Hardware Bus support
+-#
+-# CONFIG_I2C_ALI1535 is not set
+-# CONFIG_I2C_ALI1563 is not set
+-# CONFIG_I2C_ALI15X3 is not set
+-# CONFIG_I2C_AMD756 is not set
+-# CONFIG_I2C_AMD8111 is not set
+-# CONFIG_I2C_I801 is not set
+-# CONFIG_I2C_I810 is not set
+-# CONFIG_I2C_PIIX4 is not set
+-CONFIG_I2C_MPC=y
+-# CONFIG_I2C_NFORCE2 is not set
+-# CONFIG_I2C_OCORES is not set
+-# CONFIG_I2C_PARPORT_LIGHT is not set
+-# CONFIG_I2C_PROSAVAGE is not set
+-# CONFIG_I2C_SAVAGE4 is not set
+-# CONFIG_I2C_SIMTEC is not set
+-# CONFIG_I2C_SIS5595 is not set
+-# CONFIG_I2C_SIS630 is not set
+-# CONFIG_I2C_SIS96X is not set
+-# CONFIG_I2C_TAOS_EVM is not set
+-# CONFIG_I2C_STUB is not set
+-# CONFIG_I2C_VIA is not set
+-# CONFIG_I2C_VIAPRO is not set
+-# CONFIG_I2C_VOODOO3 is not set
+-
+-#
+-# Miscellaneous I2C Chip support
+-#
+-# CONFIG_DS1682 is not set
+-# CONFIG_SENSORS_EEPROM is not set
+-# CONFIG_SENSORS_PCF8574 is not set
+-# CONFIG_PCF8575 is not set
+-# CONFIG_SENSORS_PCF8591 is not set
+-# CONFIG_TPS65010 is not set
+-# CONFIG_SENSORS_MAX6875 is not set
+-# CONFIG_SENSORS_TSL2550 is not set
+-# CONFIG_I2C_DEBUG_CORE is not set
+-# CONFIG_I2C_DEBUG_ALGO is not set
+-# CONFIG_I2C_DEBUG_BUS is not set
+-# CONFIG_I2C_DEBUG_CHIP is not set
+-
+-#
+-# SPI support
+-#
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-CONFIG_HWMON=y
+-# CONFIG_HWMON_VID is not set
+-# CONFIG_SENSORS_AD7418 is not set
+-# CONFIG_SENSORS_ADM1021 is not set
+-# CONFIG_SENSORS_ADM1025 is not set
+-# CONFIG_SENSORS_ADM1026 is not set
+-# CONFIG_SENSORS_ADM1029 is not set
+-# CONFIG_SENSORS_ADM1031 is not set
+-# CONFIG_SENSORS_ADM9240 is not set
+-# CONFIG_SENSORS_ADT7470 is not set
+-# CONFIG_SENSORS_ADT7473 is not set
+-# CONFIG_SENSORS_ATXP1 is not set
+-# CONFIG_SENSORS_DS1621 is not set
+-# CONFIG_SENSORS_I5K_AMB is not set
+-# CONFIG_SENSORS_F71805F is not set
+-# CONFIG_SENSORS_F71882FG is not set
+-# CONFIG_SENSORS_F75375S is not set
+-# CONFIG_SENSORS_GL518SM is not set
+-# CONFIG_SENSORS_GL520SM is not set
+-# CONFIG_SENSORS_IT87 is not set
+-# CONFIG_SENSORS_LM63 is not set
+-# CONFIG_SENSORS_LM75 is not set
+-# CONFIG_SENSORS_LM77 is not set
+-# CONFIG_SENSORS_LM78 is not set
+-# CONFIG_SENSORS_LM80 is not set
+-# CONFIG_SENSORS_LM83 is not set
+-# CONFIG_SENSORS_LM85 is not set
+-# CONFIG_SENSORS_LM87 is not set
+-# CONFIG_SENSORS_LM90 is not set
+-# CONFIG_SENSORS_LM92 is not set
+-# CONFIG_SENSORS_LM93 is not set
+-# CONFIG_SENSORS_MAX1619 is not set
+-# CONFIG_SENSORS_MAX6650 is not set
+-# CONFIG_SENSORS_PC87360 is not set
+-# CONFIG_SENSORS_PC87427 is not set
+-# CONFIG_SENSORS_SIS5595 is not set
+-# CONFIG_SENSORS_DME1737 is not set
+-# CONFIG_SENSORS_SMSC47M1 is not set
+-# CONFIG_SENSORS_SMSC47M192 is not set
+-# CONFIG_SENSORS_SMSC47B397 is not set
+-# CONFIG_SENSORS_ADS7828 is not set
+-# CONFIG_SENSORS_THMC50 is not set
+-# CONFIG_SENSORS_VIA686A is not set
+-# CONFIG_SENSORS_VT1211 is not set
+-# CONFIG_SENSORS_VT8231 is not set
+-# CONFIG_SENSORS_W83781D is not set
+-# CONFIG_SENSORS_W83791D is not set
+-# CONFIG_SENSORS_W83792D is not set
+-# CONFIG_SENSORS_W83793 is not set
+-# CONFIG_SENSORS_W83L785TS is not set
+-# CONFIG_SENSORS_W83L786NG is not set
+-# CONFIG_SENSORS_W83627HF is not set
+-# CONFIG_SENSORS_W83627EHF is not set
+-# CONFIG_HWMON_DEBUG_CHIP is not set
+-# CONFIG_THERMAL is not set
+-CONFIG_WATCHDOG=y
+-# CONFIG_WATCHDOG_NOWAYOUT is not set
+-
+-#
+-# Watchdog Device Drivers
+-#
+-# CONFIG_SOFT_WATCHDOG is not set
+-CONFIG_83xx_WDT=y
+-
+-#
+-# PCI-based Watchdog Cards
+-#
+-# CONFIG_PCIPCWATCHDOG is not set
+-# CONFIG_WDTPCI is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-CONFIG_DAB=y
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_AGP is not set
+-# CONFIG_DRM is not set
+-# CONFIG_VGASTATE is not set
+-CONFIG_VIDEO_OUTPUT_CONTROL=m
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-CONFIG_HID_SUPPORT=y
+-CONFIG_HID=y
+-# CONFIG_HID_DEBUG is not set
+-# CONFIG_HIDRAW is not set
+-CONFIG_USB_SUPPORT=y
+-CONFIG_USB_ARCH_HAS_HCD=y
+-CONFIG_USB_ARCH_HAS_OHCI=y
+-CONFIG_USB_ARCH_HAS_EHCI=y
+-# CONFIG_USB is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_INFINIBAND is not set
+-# CONFIG_EDAC is not set
+-CONFIG_RTC_LIB=y
+-CONFIG_RTC_CLASS=y
+-CONFIG_RTC_HCTOSYS=y
+-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+-# CONFIG_RTC_DEBUG is not set
+-
+-#
+-# RTC interfaces
+-#
+-CONFIG_RTC_INTF_SYSFS=y
+-CONFIG_RTC_INTF_PROC=y
+-CONFIG_RTC_INTF_DEV=y
+-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+-# CONFIG_RTC_DRV_TEST is not set
+-
+-#
+-# I2C RTC drivers
+-#
+-# CONFIG_RTC_DRV_DS1307 is not set
+-CONFIG_RTC_DRV_DS1374=y
+-# CONFIG_RTC_DRV_DS1672 is not set
+-# CONFIG_RTC_DRV_MAX6900 is not set
+-# CONFIG_RTC_DRV_RS5C372 is not set
+-# CONFIG_RTC_DRV_ISL1208 is not set
+-# CONFIG_RTC_DRV_X1205 is not set
+-# CONFIG_RTC_DRV_PCF8563 is not set
+-# CONFIG_RTC_DRV_PCF8583 is not set
+-# CONFIG_RTC_DRV_M41T80 is not set
+-# CONFIG_RTC_DRV_S35390A is not set
+-
+-#
+-# SPI RTC drivers
+-#
+-
+-#
+-# Platform RTC drivers
+-#
+-# CONFIG_RTC_DRV_CMOS is not set
+-# CONFIG_RTC_DRV_DS1511 is not set
+-# CONFIG_RTC_DRV_DS1553 is not set
+-# CONFIG_RTC_DRV_DS1742 is not set
+-# CONFIG_RTC_DRV_STK17TA8 is not set
+-# CONFIG_RTC_DRV_M48T86 is not set
+-# CONFIG_RTC_DRV_M48T59 is not set
+-# CONFIG_RTC_DRV_V3020 is not set
+-
+-#
+-# on-CPU RTC drivers
+-#
+-# CONFIG_DMADEVICES is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=y
+-CONFIG_EXT3_FS_XATTR=y
+-# CONFIG_EXT3_FS_POSIX_ACL is not set
+-# CONFIG_EXT3_FS_SECURITY is not set
+-# CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=y
+-CONFIG_FS_MBCACHE=y
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-# CONFIG_MSDOS_FS is not set
+-# CONFIG_VFAT_FS is not set
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-# CONFIG_CRAMFS is not set
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-CONFIG_NFS_V3=y
+-# CONFIG_NFS_V3_ACL is not set
+-CONFIG_NFS_V4=y
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_LOCKD_V4=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-CONFIG_SUNRPC_GSS=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-CONFIG_RPCSEC_GSS_KRB5=y
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-CONFIG_PARTITION_ADVANCED=y
+-# CONFIG_ACORN_PARTITION is not set
+-# CONFIG_OSF_PARTITION is not set
+-# CONFIG_AMIGA_PARTITION is not set
+-# CONFIG_ATARI_PARTITION is not set
+-# CONFIG_MAC_PARTITION is not set
+-# CONFIG_MSDOS_PARTITION is not set
+-# CONFIG_LDM_PARTITION is not set
+-# CONFIG_SGI_PARTITION is not set
+-# CONFIG_ULTRIX_PARTITION is not set
+-# CONFIG_SUN_PARTITION is not set
+-# CONFIG_KARMA_PARTITION is not set
+-# CONFIG_EFI_PARTITION is not set
+-# CONFIG_SYSV68_PARTITION is not set
+-# CONFIG_NLS is not set
+-# CONFIG_DLM is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-# CONFIG_MAGIC_SYSRQ is not set
+-# CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
+-# CONFIG_HEADERS_CHECK is not set
+-# CONFIG_DEBUG_KERNEL is not set
+-# CONFIG_SLUB_DEBUG_ON is not set
+-# CONFIG_SLUB_STATS is not set
+-# CONFIG_DEBUG_BUGVERBOSE is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_PPC_EARLY_DEBUG is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_BLKCIPHER=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-CONFIG_CRYPTO_MANAGER=y
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-CONFIG_CRYPTO_MD5=y
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-CONFIG_CRYPTO_ECB=m
+-CONFIG_CRYPTO_CBC=y
+-CONFIG_CRYPTO_PCBC=m
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-CONFIG_CRYPTO_DES=y
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_TEST is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+-# CONFIG_PPC_CLOCK is not set
+--- a/arch/powerpc/configs/mpc836x_mds_defconfig
++++ /dev/null
+@@ -1,1079 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc7
+-# Mon Mar 31 11:36:57 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-CONFIG_6xx=y
+-# CONFIG_PPC_85xx is not set
+-# CONFIG_PPC_8xx is not set
+-# CONFIG_40x is not set
+-# CONFIG_44x is not set
+-# CONFIG_E200 is not set
+-CONFIG_PPC_FPU=y
+-# CONFIG_FSL_EMB_PERFMON is not set
+-CONFIG_PPC_STD_MMU=y
+-CONFIG_PPC_STD_MMU_32=y
+-# CONFIG_PPC_MM_SLICES is not set
+-# CONFIG_SMP is not set
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-CONFIG_DEFAULT_UIMAGE=y
+-# CONFIG_PPC_DCR_NATIVE is not set
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-# CONFIG_POSIX_MQUEUE is not set
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-# CONFIG_FAIR_GROUP_SCHED is not set
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-CONFIG_SYSFS_DEPRECATED_V2=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-# CONFIG_KALLSYMS is not set
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-# CONFIG_EPOLL is not set
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLUB_DEBUG=y
+-# CONFIG_SLAB is not set
+-CONFIG_SLUB=y
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_HAVE_KRETPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-CONFIG_MODULES=y
+-CONFIG_MODULE_UNLOAD=y
+-# CONFIG_MODULE_FORCE_UNLOAD is not set
+-# CONFIG_MODVERSIONS is not set
+-# CONFIG_MODULE_SRCVERSION_ALL is not set
+-# CONFIG_KMOD is not set
+-CONFIG_BLOCK=y
+-# CONFIG_LBD is not set
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MULTIPLATFORM is not set
+-# CONFIG_PPC_82xx is not set
+-CONFIG_PPC_83xx=y
+-# CONFIG_PPC_86xx is not set
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-CONFIG_MPC83xx=y
+-# CONFIG_MPC831x_RDB is not set
+-# CONFIG_MPC832x_MDS is not set
+-# CONFIG_MPC832x_RDB is not set
+-# CONFIG_MPC834x_MDS is not set
+-# CONFIG_MPC834x_ITX is not set
+-CONFIG_MPC836x_MDS=y
+-# CONFIG_MPC837x_MDS is not set
+-# CONFIG_MPC837x_RDB is not set
+-# CONFIG_SBC834x is not set
+-CONFIG_IPIC=y
+-# CONFIG_MPIC is not set
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-CONFIG_QUICC_ENGINE=y
+-# CONFIG_FSL_ULI1575 is not set
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-CONFIG_TICK_ONESHOT=y
+-CONFIG_NO_HZ=y
+-CONFIG_HIGH_RES_TIMERS=y
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_BINFMT_ELF=y
+-# CONFIG_BINFMT_MISC is not set
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_RESOURCES_64BIT is not set
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-CONFIG_PROC_DEVICETREE=y
+-# CONFIG_CMDLINE_BOOL is not set
+-# CONFIG_PM is not set
+-CONFIG_SECCOMP=y
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_GENERIC_ISA_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_FSL_SOC=y
+-CONFIG_PCI=y
+-CONFIG_PCI_DOMAINS=y
+-CONFIG_PCI_SYSCALL=y
+-# CONFIG_PCIEPORTBUS is not set
+-CONFIG_ARCH_SUPPORTS_MSI=y
+-# CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
+-# CONFIG_PCCARD is not set
+-# CONFIG_HOTPLUG_PCI is not set
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_BOOT_LOAD=0x00800000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-CONFIG_XFRM=y
+-# CONFIG_XFRM_USER is not set
+-# CONFIG_XFRM_SUB_POLICY is not set
+-# CONFIG_XFRM_MIGRATE is not set
+-# CONFIG_XFRM_STATISTICS is not set
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-CONFIG_IP_MULTICAST=y
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_IP_MROUTE is not set
+-# CONFIG_ARPD is not set
+-CONFIG_SYN_COOKIES=y
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-CONFIG_INET_XFRM_MODE_TRANSPORT=y
+-CONFIG_INET_XFRM_MODE_TUNNEL=y
+-CONFIG_INET_XFRM_MODE_BEET=y
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-# CONFIG_FW_LOADER is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-# CONFIG_CONNECTOR is not set
+-# CONFIG_MTD is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_CPQ_DA is not set
+-# CONFIG_BLK_CPQ_CISS_DA is not set
+-# CONFIG_BLK_DEV_DAC960 is not set
+-# CONFIG_BLK_DEV_UMEM is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-CONFIG_BLK_DEV_LOOP=y
+-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-# CONFIG_BLK_DEV_SX8 is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=32768
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_PHANTOM is not set
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_SGI_IOC4 is not set
+-# CONFIG_TIFM_CORE is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-# CONFIG_IDE is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-CONFIG_SCSI=y
+-CONFIG_SCSI_DMA=y
+-# CONFIG_SCSI_TGT is not set
+-# CONFIG_SCSI_NETLINK is not set
+-CONFIG_SCSI_PROC_FS=y
+-
+-#
+-# SCSI support type (disk, tape, CD-ROM)
+-#
+-# CONFIG_BLK_DEV_SD is not set
+-# CONFIG_CHR_DEV_ST is not set
+-# CONFIG_CHR_DEV_OSST is not set
+-# CONFIG_BLK_DEV_SR is not set
+-# CONFIG_CHR_DEV_SG is not set
+-# CONFIG_CHR_DEV_SCH is not set
+-
+-#
+-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+-#
+-# CONFIG_SCSI_MULTI_LUN is not set
+-# CONFIG_SCSI_CONSTANTS is not set
+-# CONFIG_SCSI_LOGGING is not set
+-# CONFIG_SCSI_SCAN_ASYNC is not set
+-CONFIG_SCSI_WAIT_SCAN=m
+-
+-#
+-# SCSI Transports
+-#
+-# CONFIG_SCSI_SPI_ATTRS is not set
+-# CONFIG_SCSI_FC_ATTRS is not set
+-# CONFIG_SCSI_ISCSI_ATTRS is not set
+-# CONFIG_SCSI_SAS_LIBSAS is not set
+-# CONFIG_SCSI_SRP_ATTRS is not set
+-CONFIG_SCSI_LOWLEVEL=y
+-# CONFIG_ISCSI_TCP is not set
+-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+-# CONFIG_SCSI_3W_9XXX is not set
+-# CONFIG_SCSI_ACARD is not set
+-# CONFIG_SCSI_AACRAID is not set
+-# CONFIG_SCSI_AIC7XXX is not set
+-# CONFIG_SCSI_AIC7XXX_OLD is not set
+-# CONFIG_SCSI_AIC79XX is not set
+-# CONFIG_SCSI_AIC94XX is not set
+-# CONFIG_SCSI_DPT_I2O is not set
+-# CONFIG_SCSI_ADVANSYS is not set
+-# CONFIG_SCSI_ARCMSR is not set
+-# CONFIG_MEGARAID_NEWGEN is not set
+-# CONFIG_MEGARAID_LEGACY is not set
+-# CONFIG_MEGARAID_SAS is not set
+-# CONFIG_SCSI_HPTIOP is not set
+-# CONFIG_SCSI_BUSLOGIC is not set
+-# CONFIG_SCSI_DMX3191D is not set
+-# CONFIG_SCSI_EATA is not set
+-# CONFIG_SCSI_FUTURE_DOMAIN is not set
+-# CONFIG_SCSI_GDTH is not set
+-# CONFIG_SCSI_IPS is not set
+-# CONFIG_SCSI_INITIO is not set
+-# CONFIG_SCSI_INIA100 is not set
+-# CONFIG_SCSI_MVSAS is not set
+-# CONFIG_SCSI_STEX is not set
+-# CONFIG_SCSI_SYM53C8XX_2 is not set
+-# CONFIG_SCSI_QLOGIC_1280 is not set
+-# CONFIG_SCSI_QLA_FC is not set
+-# CONFIG_SCSI_QLA_ISCSI is not set
+-# CONFIG_SCSI_LPFC is not set
+-# CONFIG_SCSI_DC395x is not set
+-# CONFIG_SCSI_DC390T is not set
+-# CONFIG_SCSI_NSP32 is not set
+-# CONFIG_SCSI_DEBUG is not set
+-# CONFIG_SCSI_SRP is not set
+-# CONFIG_ATA is not set
+-# CONFIG_MD is not set
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-# CONFIG_FIREWIRE is not set
+-# CONFIG_IEEE1394 is not set
+-# CONFIG_I2O is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_ARCNET is not set
+-CONFIG_PHYLIB=y
+-
+-#
+-# MII PHY device drivers
+-#
+-CONFIG_MARVELL_PHY=y
+-# CONFIG_DAVICOM_PHY is not set
+-# CONFIG_QSEMI_PHY is not set
+-# CONFIG_LXT_PHY is not set
+-# CONFIG_CICADA_PHY is not set
+-# CONFIG_VITESSE_PHY is not set
+-# CONFIG_SMSC_PHY is not set
+-# CONFIG_BROADCOM_PHY is not set
+-# CONFIG_ICPLUS_PHY is not set
+-# CONFIG_REALTEK_PHY is not set
+-# CONFIG_FIXED_PHY is not set
+-# CONFIG_MDIO_BITBANG is not set
+-CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
+-# CONFIG_HAPPYMEAL is not set
+-# CONFIG_SUNGEM is not set
+-# CONFIG_CASSINI is not set
+-# CONFIG_NET_VENDOR_3COM is not set
+-# CONFIG_NET_TULIP is not set
+-# CONFIG_HP100 is not set
+-# CONFIG_IBM_NEW_EMAC_ZMII is not set
+-# CONFIG_IBM_NEW_EMAC_RGMII is not set
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-# CONFIG_NET_PCI is not set
+-# CONFIG_B44 is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_ACENIC is not set
+-# CONFIG_DL2K is not set
+-# CONFIG_E1000 is not set
+-# CONFIG_E1000E is not set
+-# CONFIG_E1000E_ENABLED is not set
+-# CONFIG_IP1000 is not set
+-# CONFIG_IGB is not set
+-# CONFIG_NS83820 is not set
+-# CONFIG_HAMACHI is not set
+-# CONFIG_YELLOWFIN is not set
+-# CONFIG_R8169 is not set
+-# CONFIG_SIS190 is not set
+-# CONFIG_SKGE is not set
+-# CONFIG_SKY2 is not set
+-# CONFIG_SK98LIN is not set
+-# CONFIG_VIA_VELOCITY is not set
+-# CONFIG_TIGON3 is not set
+-# CONFIG_BNX2 is not set
+-# CONFIG_GIANFAR is not set
+-CONFIG_UCC_GETH=y
+-# CONFIG_UGETH_NAPI is not set
+-# CONFIG_UGETH_MAGIC_PACKET is not set
+-# CONFIG_UGETH_FILTERING is not set
+-# CONFIG_UGETH_TX_ON_DEMAND is not set
+-# CONFIG_QLA3XXX is not set
+-# CONFIG_ATL1 is not set
+-CONFIG_NETDEV_10000=y
+-# CONFIG_CHELSIO_T1 is not set
+-# CONFIG_CHELSIO_T3 is not set
+-# CONFIG_IXGBE is not set
+-# CONFIG_IXGB is not set
+-# CONFIG_S2IO is not set
+-# CONFIG_MYRI10GE is not set
+-# CONFIG_NETXEN_NIC is not set
+-# CONFIG_NIU is not set
+-# CONFIG_MLX4_CORE is not set
+-# CONFIG_TEHUTI is not set
+-# CONFIG_BNX2X is not set
+-# CONFIG_TR is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-# CONFIG_WAN is not set
+-# CONFIG_FDDI is not set
+-# CONFIG_HIPPI is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NET_FC is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-CONFIG_INPUT=y
+-# CONFIG_INPUT_FF_MEMLESS is not set
+-# CONFIG_INPUT_POLLDEV is not set
+-
+-#
+-# Userland interfaces
+-#
+-# CONFIG_INPUT_MOUSEDEV is not set
+-# CONFIG_INPUT_JOYDEV is not set
+-# CONFIG_INPUT_EVDEV is not set
+-# CONFIG_INPUT_EVBUG is not set
+-
+-#
+-# Input Device Drivers
+-#
+-# CONFIG_INPUT_KEYBOARD is not set
+-# CONFIG_INPUT_MOUSE is not set
+-# CONFIG_INPUT_JOYSTICK is not set
+-# CONFIG_INPUT_TABLET is not set
+-# CONFIG_INPUT_TOUCHSCREEN is not set
+-# CONFIG_INPUT_MISC is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-# CONFIG_NOZOMI is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-CONFIG_SERIAL_8250_PCI=y
+-CONFIG_SERIAL_8250_NR_UARTS=4
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-# CONFIG_SERIAL_8250_EXTENDED is not set
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_JSM is not set
+-# CONFIG_SERIAL_OF_PLATFORM is not set
+-# CONFIG_SERIAL_QE is not set
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-CONFIG_HW_RANDOM=y
+-# CONFIG_NVRAM is not set
+-# CONFIG_GEN_RTC is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_APPLICOM is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_DEVPORT=y
+-CONFIG_I2C=y
+-CONFIG_I2C_BOARDINFO=y
+-CONFIG_I2C_CHARDEV=y
+-
+-#
+-# I2C Algorithms
+-#
+-# CONFIG_I2C_ALGOBIT is not set
+-# CONFIG_I2C_ALGOPCF is not set
+-# CONFIG_I2C_ALGOPCA is not set
+-
+-#
+-# I2C Hardware Bus support
+-#
+-# CONFIG_I2C_ALI1535 is not set
+-# CONFIG_I2C_ALI1563 is not set
+-# CONFIG_I2C_ALI15X3 is not set
+-# CONFIG_I2C_AMD756 is not set
+-# CONFIG_I2C_AMD8111 is not set
+-# CONFIG_I2C_I801 is not set
+-# CONFIG_I2C_I810 is not set
+-# CONFIG_I2C_PIIX4 is not set
+-CONFIG_I2C_MPC=y
+-# CONFIG_I2C_NFORCE2 is not set
+-# CONFIG_I2C_OCORES is not set
+-# CONFIG_I2C_PARPORT_LIGHT is not set
+-# CONFIG_I2C_PROSAVAGE is not set
+-# CONFIG_I2C_SAVAGE4 is not set
+-# CONFIG_I2C_SIMTEC is not set
+-# CONFIG_I2C_SIS5595 is not set
+-# CONFIG_I2C_SIS630 is not set
+-# CONFIG_I2C_SIS96X is not set
+-# CONFIG_I2C_TAOS_EVM is not set
+-# CONFIG_I2C_STUB is not set
+-# CONFIG_I2C_VIA is not set
+-# CONFIG_I2C_VIAPRO is not set
+-# CONFIG_I2C_VOODOO3 is not set
+-
+-#
+-# Miscellaneous I2C Chip support
+-#
+-# CONFIG_DS1682 is not set
+-# CONFIG_SENSORS_EEPROM is not set
+-# CONFIG_SENSORS_PCF8574 is not set
+-# CONFIG_PCF8575 is not set
+-# CONFIG_SENSORS_PCF8591 is not set
+-# CONFIG_TPS65010 is not set
+-# CONFIG_SENSORS_MAX6875 is not set
+-# CONFIG_SENSORS_TSL2550 is not set
+-# CONFIG_I2C_DEBUG_CORE is not set
+-# CONFIG_I2C_DEBUG_ALGO is not set
+-# CONFIG_I2C_DEBUG_BUS is not set
+-# CONFIG_I2C_DEBUG_CHIP is not set
+-
+-#
+-# SPI support
+-#
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-CONFIG_HWMON=y
+-# CONFIG_HWMON_VID is not set
+-# CONFIG_SENSORS_AD7418 is not set
+-# CONFIG_SENSORS_ADM1021 is not set
+-# CONFIG_SENSORS_ADM1025 is not set
+-# CONFIG_SENSORS_ADM1026 is not set
+-# CONFIG_SENSORS_ADM1029 is not set
+-# CONFIG_SENSORS_ADM1031 is not set
+-# CONFIG_SENSORS_ADM9240 is not set
+-# CONFIG_SENSORS_ADT7470 is not set
+-# CONFIG_SENSORS_ADT7473 is not set
+-# CONFIG_SENSORS_ATXP1 is not set
+-# CONFIG_SENSORS_DS1621 is not set
+-# CONFIG_SENSORS_I5K_AMB is not set
+-# CONFIG_SENSORS_F71805F is not set
+-# CONFIG_SENSORS_F71882FG is not set
+-# CONFIG_SENSORS_F75375S is not set
+-# CONFIG_SENSORS_GL518SM is not set
+-# CONFIG_SENSORS_GL520SM is not set
+-# CONFIG_SENSORS_IT87 is not set
+-# CONFIG_SENSORS_LM63 is not set
+-# CONFIG_SENSORS_LM75 is not set
+-# CONFIG_SENSORS_LM77 is not set
+-# CONFIG_SENSORS_LM78 is not set
+-# CONFIG_SENSORS_LM80 is not set
+-# CONFIG_SENSORS_LM83 is not set
+-# CONFIG_SENSORS_LM85 is not set
+-# CONFIG_SENSORS_LM87 is not set
+-# CONFIG_SENSORS_LM90 is not set
+-# CONFIG_SENSORS_LM92 is not set
+-# CONFIG_SENSORS_LM93 is not set
+-# CONFIG_SENSORS_MAX1619 is not set
+-# CONFIG_SENSORS_MAX6650 is not set
+-# CONFIG_SENSORS_PC87360 is not set
+-# CONFIG_SENSORS_PC87427 is not set
+-# CONFIG_SENSORS_SIS5595 is not set
+-# CONFIG_SENSORS_DME1737 is not set
+-# CONFIG_SENSORS_SMSC47M1 is not set
+-# CONFIG_SENSORS_SMSC47M192 is not set
+-# CONFIG_SENSORS_SMSC47B397 is not set
+-# CONFIG_SENSORS_ADS7828 is not set
+-# CONFIG_SENSORS_THMC50 is not set
+-# CONFIG_SENSORS_VIA686A is not set
+-# CONFIG_SENSORS_VT1211 is not set
+-# CONFIG_SENSORS_VT8231 is not set
+-# CONFIG_SENSORS_W83781D is not set
+-# CONFIG_SENSORS_W83791D is not set
+-# CONFIG_SENSORS_W83792D is not set
+-# CONFIG_SENSORS_W83793 is not set
+-# CONFIG_SENSORS_W83L785TS is not set
+-# CONFIG_SENSORS_W83L786NG is not set
+-# CONFIG_SENSORS_W83627HF is not set
+-# CONFIG_SENSORS_W83627EHF is not set
+-# CONFIG_HWMON_DEBUG_CHIP is not set
+-# CONFIG_THERMAL is not set
+-CONFIG_WATCHDOG=y
+-# CONFIG_WATCHDOG_NOWAYOUT is not set
+-
+-#
+-# Watchdog Device Drivers
+-#
+-# CONFIG_SOFT_WATCHDOG is not set
+-CONFIG_83xx_WDT=y
+-
+-#
+-# PCI-based Watchdog Cards
+-#
+-# CONFIG_PCIPCWATCHDOG is not set
+-# CONFIG_WDTPCI is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-CONFIG_DAB=y
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_AGP is not set
+-# CONFIG_DRM is not set
+-# CONFIG_VGASTATE is not set
+-CONFIG_VIDEO_OUTPUT_CONTROL=m
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-CONFIG_HID_SUPPORT=y
+-CONFIG_HID=y
+-# CONFIG_HID_DEBUG is not set
+-# CONFIG_HIDRAW is not set
+-CONFIG_USB_SUPPORT=y
+-CONFIG_USB_ARCH_HAS_HCD=y
+-CONFIG_USB_ARCH_HAS_OHCI=y
+-CONFIG_USB_ARCH_HAS_EHCI=y
+-# CONFIG_USB is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_INFINIBAND is not set
+-# CONFIG_EDAC is not set
+-CONFIG_RTC_LIB=y
+-CONFIG_RTC_CLASS=y
+-CONFIG_RTC_HCTOSYS=y
+-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+-# CONFIG_RTC_DEBUG is not set
+-
+-#
+-# RTC interfaces
+-#
+-CONFIG_RTC_INTF_SYSFS=y
+-CONFIG_RTC_INTF_PROC=y
+-CONFIG_RTC_INTF_DEV=y
+-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+-# CONFIG_RTC_DRV_TEST is not set
+-
+-#
+-# I2C RTC drivers
+-#
+-# CONFIG_RTC_DRV_DS1307 is not set
+-CONFIG_RTC_DRV_DS1374=y
+-# CONFIG_RTC_DRV_DS1672 is not set
+-# CONFIG_RTC_DRV_MAX6900 is not set
+-# CONFIG_RTC_DRV_RS5C372 is not set
+-# CONFIG_RTC_DRV_ISL1208 is not set
+-# CONFIG_RTC_DRV_X1205 is not set
+-# CONFIG_RTC_DRV_PCF8563 is not set
+-# CONFIG_RTC_DRV_PCF8583 is not set
+-# CONFIG_RTC_DRV_M41T80 is not set
+-# CONFIG_RTC_DRV_S35390A is not set
+-
+-#
+-# SPI RTC drivers
+-#
+-
+-#
+-# Platform RTC drivers
+-#
+-# CONFIG_RTC_DRV_CMOS is not set
+-# CONFIG_RTC_DRV_DS1511 is not set
+-# CONFIG_RTC_DRV_DS1553 is not set
+-# CONFIG_RTC_DRV_DS1742 is not set
+-# CONFIG_RTC_DRV_STK17TA8 is not set
+-# CONFIG_RTC_DRV_M48T86 is not set
+-# CONFIG_RTC_DRV_M48T59 is not set
+-# CONFIG_RTC_DRV_V3020 is not set
+-
+-#
+-# on-CPU RTC drivers
+-#
+-# CONFIG_DMADEVICES is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=y
+-CONFIG_EXT3_FS_XATTR=y
+-# CONFIG_EXT3_FS_POSIX_ACL is not set
+-# CONFIG_EXT3_FS_SECURITY is not set
+-# CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=y
+-CONFIG_FS_MBCACHE=y
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-# CONFIG_MSDOS_FS is not set
+-# CONFIG_VFAT_FS is not set
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-# CONFIG_CRAMFS is not set
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-CONFIG_NFS_V3=y
+-# CONFIG_NFS_V3_ACL is not set
+-CONFIG_NFS_V4=y
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_LOCKD_V4=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-CONFIG_SUNRPC_GSS=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-CONFIG_RPCSEC_GSS_KRB5=y
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-CONFIG_PARTITION_ADVANCED=y
+-# CONFIG_ACORN_PARTITION is not set
+-# CONFIG_OSF_PARTITION is not set
+-# CONFIG_AMIGA_PARTITION is not set
+-# CONFIG_ATARI_PARTITION is not set
+-# CONFIG_MAC_PARTITION is not set
+-# CONFIG_MSDOS_PARTITION is not set
+-# CONFIG_LDM_PARTITION is not set
+-# CONFIG_SGI_PARTITION is not set
+-# CONFIG_ULTRIX_PARTITION is not set
+-# CONFIG_SUN_PARTITION is not set
+-# CONFIG_KARMA_PARTITION is not set
+-# CONFIG_EFI_PARTITION is not set
+-# CONFIG_SYSV68_PARTITION is not set
+-# CONFIG_NLS is not set
+-# CONFIG_DLM is not set
+-CONFIG_UCC_FAST=y
+-CONFIG_UCC=y
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-# CONFIG_MAGIC_SYSRQ is not set
+-# CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
+-# CONFIG_HEADERS_CHECK is not set
+-# CONFIG_DEBUG_KERNEL is not set
+-# CONFIG_SLUB_DEBUG_ON is not set
+-# CONFIG_SLUB_STATS is not set
+-# CONFIG_DEBUG_BUGVERBOSE is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_PPC_EARLY_DEBUG is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_BLKCIPHER=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-CONFIG_CRYPTO_MANAGER=y
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-CONFIG_CRYPTO_MD5=y
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-CONFIG_CRYPTO_ECB=m
+-CONFIG_CRYPTO_CBC=y
+-CONFIG_CRYPTO_PCBC=m
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-CONFIG_CRYPTO_DES=y
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_TEST is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+-# CONFIG_PPC_CLOCK is not set
+-CONFIG_PPC_LIB_RHEAP=y
+--- a/arch/powerpc/configs/mpc837x_mds_defconfig
++++ /dev/null
+@@ -1,899 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc6
+-# Mon Mar 24 08:48:23 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-CONFIG_6xx=y
+-# CONFIG_PPC_85xx is not set
+-# CONFIG_PPC_8xx is not set
+-# CONFIG_40x is not set
+-# CONFIG_44x is not set
+-# CONFIG_E200 is not set
+-CONFIG_PPC_FPU=y
+-# CONFIG_FSL_EMB_PERFMON is not set
+-CONFIG_PPC_STD_MMU=y
+-CONFIG_PPC_STD_MMU_32=y
+-# CONFIG_PPC_MM_SLICES is not set
+-# CONFIG_SMP is not set
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-CONFIG_DEFAULT_UIMAGE=y
+-# CONFIG_PPC_DCR_NATIVE is not set
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-# CONFIG_POSIX_MQUEUE is not set
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-CONFIG_FAIR_GROUP_SCHED=y
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-CONFIG_SYSFS_DEPRECATED_V2=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-CONFIG_KALLSYMS=y
+-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-# CONFIG_EPOLL is not set
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLAB=y
+-# CONFIG_SLUB is not set
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-# CONFIG_KPROBES is not set
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_HAVE_KRETPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-CONFIG_MODULES=y
+-CONFIG_MODULE_UNLOAD=y
+-# CONFIG_MODULE_FORCE_UNLOAD is not set
+-# CONFIG_MODVERSIONS is not set
+-# CONFIG_MODULE_SRCVERSION_ALL is not set
+-# CONFIG_KMOD is not set
+-CONFIG_BLOCK=y
+-# CONFIG_LBD is not set
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MULTIPLATFORM is not set
+-# CONFIG_PPC_82xx is not set
+-CONFIG_PPC_83xx=y
+-# CONFIG_PPC_86xx is not set
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-CONFIG_MPC83xx=y
+-# CONFIG_MPC831x_RDB is not set
+-# CONFIG_MPC832x_MDS is not set
+-# CONFIG_MPC832x_RDB is not set
+-# CONFIG_MPC834x_MDS is not set
+-# CONFIG_MPC834x_ITX is not set
+-# CONFIG_MPC836x_MDS is not set
+-CONFIG_MPC837x_MDS=y
+-# CONFIG_MPC837x_RDB is not set
+-# CONFIG_SBC834x is not set
+-CONFIG_PPC_MPC837x=y
+-CONFIG_IPIC=y
+-# CONFIG_MPIC is not set
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-# CONFIG_FSL_ULI1575 is not set
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-# CONFIG_TICK_ONESHOT is not set
+-# CONFIG_NO_HZ is not set
+-# CONFIG_HIGH_RES_TIMERS is not set
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_BINFMT_ELF=y
+-# CONFIG_BINFMT_MISC is not set
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_RESOURCES_64BIT is not set
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-CONFIG_PROC_DEVICETREE=y
+-# CONFIG_CMDLINE_BOOL is not set
+-# CONFIG_PM is not set
+-CONFIG_SECCOMP=y
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_GENERIC_ISA_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_FSL_SOC=y
+-# CONFIG_PCI is not set
+-# CONFIG_PCI_DOMAINS is not set
+-# CONFIG_PCI_SYSCALL is not set
+-# CONFIG_ARCH_SUPPORTS_MSI is not set
+-# CONFIG_PCCARD is not set
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_BOOT_LOAD=0x00800000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-CONFIG_XFRM=y
+-CONFIG_XFRM_USER=m
+-# CONFIG_XFRM_SUB_POLICY is not set
+-# CONFIG_XFRM_MIGRATE is not set
+-# CONFIG_XFRM_STATISTICS is not set
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-CONFIG_IP_MULTICAST=y
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_IP_MROUTE is not set
+-# CONFIG_ARPD is not set
+-CONFIG_SYN_COOKIES=y
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-CONFIG_INET_XFRM_MODE_TRANSPORT=y
+-CONFIG_INET_XFRM_MODE_TUNNEL=y
+-CONFIG_INET_XFRM_MODE_BEET=y
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-# CONFIG_FW_LOADER is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-# CONFIG_CONNECTOR is not set
+-# CONFIG_MTD is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-CONFIG_BLK_DEV_LOOP=y
+-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=32768
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-# CONFIG_IDE is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-CONFIG_SCSI=y
+-CONFIG_SCSI_DMA=y
+-# CONFIG_SCSI_TGT is not set
+-# CONFIG_SCSI_NETLINK is not set
+-CONFIG_SCSI_PROC_FS=y
+-
+-#
+-# SCSI support type (disk, tape, CD-ROM)
+-#
+-CONFIG_BLK_DEV_SD=y
+-# CONFIG_CHR_DEV_ST is not set
+-# CONFIG_CHR_DEV_OSST is not set
+-# CONFIG_BLK_DEV_SR is not set
+-CONFIG_CHR_DEV_SG=y
+-# CONFIG_CHR_DEV_SCH is not set
+-
+-#
+-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+-#
+-# CONFIG_SCSI_MULTI_LUN is not set
+-# CONFIG_SCSI_CONSTANTS is not set
+-# CONFIG_SCSI_LOGGING is not set
+-# CONFIG_SCSI_SCAN_ASYNC is not set
+-CONFIG_SCSI_WAIT_SCAN=m
+-
+-#
+-# SCSI Transports
+-#
+-# CONFIG_SCSI_SPI_ATTRS is not set
+-# CONFIG_SCSI_FC_ATTRS is not set
+-# CONFIG_SCSI_ISCSI_ATTRS is not set
+-# CONFIG_SCSI_SAS_LIBSAS is not set
+-# CONFIG_SCSI_SRP_ATTRS is not set
+-CONFIG_SCSI_LOWLEVEL=y
+-# CONFIG_ISCSI_TCP is not set
+-# CONFIG_SCSI_DEBUG is not set
+-CONFIG_ATA=y
+-# CONFIG_ATA_NONSTANDARD is not set
+-# CONFIG_SATA_MV is not set
+-CONFIG_SATA_FSL=y
+-# CONFIG_PATA_PLATFORM is not set
+-# CONFIG_MD is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-CONFIG_PHYLIB=y
+-
+-#
+-# MII PHY device drivers
+-#
+-CONFIG_MARVELL_PHY=y
+-# CONFIG_DAVICOM_PHY is not set
+-# CONFIG_QSEMI_PHY is not set
+-# CONFIG_LXT_PHY is not set
+-# CONFIG_CICADA_PHY is not set
+-# CONFIG_VITESSE_PHY is not set
+-# CONFIG_SMSC_PHY is not set
+-# CONFIG_BROADCOM_PHY is not set
+-# CONFIG_ICPLUS_PHY is not set
+-# CONFIG_REALTEK_PHY is not set
+-# CONFIG_FIXED_PHY is not set
+-# CONFIG_MDIO_BITBANG is not set
+-CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
+-# CONFIG_IBM_NEW_EMAC_ZMII is not set
+-# CONFIG_IBM_NEW_EMAC_RGMII is not set
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-# CONFIG_B44 is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_E1000E_ENABLED is not set
+-CONFIG_GIANFAR=y
+-# CONFIG_GFAR_NAPI is not set
+-CONFIG_NETDEV_10000=y
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-# CONFIG_WAN is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-CONFIG_INPUT=y
+-# CONFIG_INPUT_FF_MEMLESS is not set
+-# CONFIG_INPUT_POLLDEV is not set
+-
+-#
+-# Userland interfaces
+-#
+-# CONFIG_INPUT_MOUSEDEV is not set
+-# CONFIG_INPUT_JOYDEV is not set
+-# CONFIG_INPUT_EVDEV is not set
+-# CONFIG_INPUT_EVBUG is not set
+-
+-#
+-# Input Device Drivers
+-#
+-# CONFIG_INPUT_KEYBOARD is not set
+-# CONFIG_INPUT_MOUSE is not set
+-# CONFIG_INPUT_JOYSTICK is not set
+-# CONFIG_INPUT_TABLET is not set
+-# CONFIG_INPUT_TOUCHSCREEN is not set
+-# CONFIG_INPUT_MISC is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-CONFIG_SERIAL_8250_NR_UARTS=4
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-# CONFIG_SERIAL_8250_EXTENDED is not set
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_OF_PLATFORM is not set
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-# CONFIG_HW_RANDOM is not set
+-# CONFIG_NVRAM is not set
+-CONFIG_GEN_RTC=y
+-# CONFIG_GEN_RTC_X is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_I2C=y
+-CONFIG_I2C_BOARDINFO=y
+-CONFIG_I2C_CHARDEV=y
+-
+-#
+-# I2C Algorithms
+-#
+-# CONFIG_I2C_ALGOBIT is not set
+-# CONFIG_I2C_ALGOPCF is not set
+-# CONFIG_I2C_ALGOPCA is not set
+-
+-#
+-# I2C Hardware Bus support
+-#
+-CONFIG_I2C_MPC=y
+-# CONFIG_I2C_OCORES is not set
+-# CONFIG_I2C_PARPORT_LIGHT is not set
+-# CONFIG_I2C_SIMTEC is not set
+-# CONFIG_I2C_TAOS_EVM is not set
+-# CONFIG_I2C_STUB is not set
+-
+-#
+-# Miscellaneous I2C Chip support
+-#
+-# CONFIG_DS1682 is not set
+-# CONFIG_SENSORS_EEPROM is not set
+-# CONFIG_SENSORS_PCF8574 is not set
+-# CONFIG_PCF8575 is not set
+-# CONFIG_SENSORS_PCF8591 is not set
+-# CONFIG_TPS65010 is not set
+-# CONFIG_SENSORS_MAX6875 is not set
+-# CONFIG_SENSORS_TSL2550 is not set
+-# CONFIG_I2C_DEBUG_CORE is not set
+-# CONFIG_I2C_DEBUG_ALGO is not set
+-# CONFIG_I2C_DEBUG_BUS is not set
+-# CONFIG_I2C_DEBUG_CHIP is not set
+-
+-#
+-# SPI support
+-#
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-CONFIG_HWMON=y
+-# CONFIG_HWMON_VID is not set
+-# CONFIG_SENSORS_AD7418 is not set
+-# CONFIG_SENSORS_ADM1021 is not set
+-# CONFIG_SENSORS_ADM1025 is not set
+-# CONFIG_SENSORS_ADM1026 is not set
+-# CONFIG_SENSORS_ADM1029 is not set
+-# CONFIG_SENSORS_ADM1031 is not set
+-# CONFIG_SENSORS_ADM9240 is not set
+-# CONFIG_SENSORS_ADT7470 is not set
+-# CONFIG_SENSORS_ADT7473 is not set
+-# CONFIG_SENSORS_ATXP1 is not set
+-# CONFIG_SENSORS_DS1621 is not set
+-# CONFIG_SENSORS_F71805F is not set
+-# CONFIG_SENSORS_F71882FG is not set
+-# CONFIG_SENSORS_F75375S is not set
+-# CONFIG_SENSORS_GL518SM is not set
+-# CONFIG_SENSORS_GL520SM is not set
+-# CONFIG_SENSORS_IT87 is not set
+-# CONFIG_SENSORS_LM63 is not set
+-# CONFIG_SENSORS_LM75 is not set
+-# CONFIG_SENSORS_LM77 is not set
+-# CONFIG_SENSORS_LM78 is not set
+-# CONFIG_SENSORS_LM80 is not set
+-# CONFIG_SENSORS_LM83 is not set
+-# CONFIG_SENSORS_LM85 is not set
+-# CONFIG_SENSORS_LM87 is not set
+-# CONFIG_SENSORS_LM90 is not set
+-# CONFIG_SENSORS_LM92 is not set
+-# CONFIG_SENSORS_LM93 is not set
+-# CONFIG_SENSORS_MAX1619 is not set
+-# CONFIG_SENSORS_MAX6650 is not set
+-# CONFIG_SENSORS_PC87360 is not set
+-# CONFIG_SENSORS_PC87427 is not set
+-# CONFIG_SENSORS_DME1737 is not set
+-# CONFIG_SENSORS_SMSC47M1 is not set
+-# CONFIG_SENSORS_SMSC47M192 is not set
+-# CONFIG_SENSORS_SMSC47B397 is not set
+-# CONFIG_SENSORS_ADS7828 is not set
+-# CONFIG_SENSORS_THMC50 is not set
+-# CONFIG_SENSORS_VT1211 is not set
+-# CONFIG_SENSORS_W83781D is not set
+-# CONFIG_SENSORS_W83791D is not set
+-# CONFIG_SENSORS_W83792D is not set
+-# CONFIG_SENSORS_W83793 is not set
+-# CONFIG_SENSORS_W83L785TS is not set
+-# CONFIG_SENSORS_W83L786NG is not set
+-# CONFIG_SENSORS_W83627HF is not set
+-# CONFIG_SENSORS_W83627EHF is not set
+-# CONFIG_HWMON_DEBUG_CHIP is not set
+-# CONFIG_THERMAL is not set
+-CONFIG_WATCHDOG=y
+-# CONFIG_WATCHDOG_NOWAYOUT is not set
+-
+-#
+-# Watchdog Device Drivers
+-#
+-# CONFIG_SOFT_WATCHDOG is not set
+-CONFIG_83xx_WDT=y
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-CONFIG_DAB=y
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_VGASTATE is not set
+-CONFIG_VIDEO_OUTPUT_CONTROL=m
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-CONFIG_HID_SUPPORT=y
+-CONFIG_HID=y
+-# CONFIG_HID_DEBUG is not set
+-# CONFIG_HIDRAW is not set
+-CONFIG_USB_SUPPORT=y
+-CONFIG_USB_ARCH_HAS_HCD=y
+-# CONFIG_USB_ARCH_HAS_OHCI is not set
+-CONFIG_USB_ARCH_HAS_EHCI=y
+-# CONFIG_USB is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_EDAC is not set
+-# CONFIG_RTC_CLASS is not set
+-# CONFIG_DMADEVICES is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=y
+-CONFIG_EXT3_FS_XATTR=y
+-# CONFIG_EXT3_FS_POSIX_ACL is not set
+-# CONFIG_EXT3_FS_SECURITY is not set
+-# CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=y
+-CONFIG_FS_MBCACHE=y
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-# CONFIG_MSDOS_FS is not set
+-# CONFIG_VFAT_FS is not set
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-# CONFIG_CRAMFS is not set
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-CONFIG_NFS_V3=y
+-# CONFIG_NFS_V3_ACL is not set
+-CONFIG_NFS_V4=y
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_LOCKD_V4=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-CONFIG_SUNRPC_GSS=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-CONFIG_RPCSEC_GSS_KRB5=y
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-CONFIG_PARTITION_ADVANCED=y
+-# CONFIG_ACORN_PARTITION is not set
+-# CONFIG_OSF_PARTITION is not set
+-# CONFIG_AMIGA_PARTITION is not set
+-# CONFIG_ATARI_PARTITION is not set
+-# CONFIG_MAC_PARTITION is not set
+-CONFIG_MSDOS_PARTITION=y
+-# CONFIG_BSD_DISKLABEL is not set
+-# CONFIG_MINIX_SUBPARTITION is not set
+-# CONFIG_SOLARIS_X86_PARTITION is not set
+-# CONFIG_UNIXWARE_DISKLABEL is not set
+-# CONFIG_LDM_PARTITION is not set
+-# CONFIG_SGI_PARTITION is not set
+-# CONFIG_ULTRIX_PARTITION is not set
+-# CONFIG_SUN_PARTITION is not set
+-# CONFIG_KARMA_PARTITION is not set
+-# CONFIG_EFI_PARTITION is not set
+-# CONFIG_SYSV68_PARTITION is not set
+-# CONFIG_NLS is not set
+-# CONFIG_DLM is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-# CONFIG_MAGIC_SYSRQ is not set
+-# CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
+-# CONFIG_HEADERS_CHECK is not set
+-# CONFIG_DEBUG_KERNEL is not set
+-# CONFIG_DEBUG_BUGVERBOSE is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_PPC_EARLY_DEBUG is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_BLKCIPHER=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-CONFIG_CRYPTO_MANAGER=y
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-CONFIG_CRYPTO_MD5=y
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-CONFIG_CRYPTO_ECB=m
+-CONFIG_CRYPTO_CBC=y
+-CONFIG_CRYPTO_PCBC=m
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-CONFIG_CRYPTO_DES=y
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_TEST is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_PPC_CLOCK is not set
+--- a/arch/powerpc/configs/mpc837x_rdb_defconfig
++++ /dev/null
+@@ -1,930 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc6
+-# Mon Mar 24 08:48:24 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-CONFIG_6xx=y
+-# CONFIG_PPC_85xx is not set
+-# CONFIG_PPC_8xx is not set
+-# CONFIG_40x is not set
+-# CONFIG_44x is not set
+-# CONFIG_E200 is not set
+-CONFIG_PPC_FPU=y
+-# CONFIG_FSL_EMB_PERFMON is not set
+-CONFIG_PPC_STD_MMU=y
+-CONFIG_PPC_STD_MMU_32=y
+-# CONFIG_PPC_MM_SLICES is not set
+-# CONFIG_SMP is not set
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-CONFIG_DEFAULT_UIMAGE=y
+-# CONFIG_PPC_DCR_NATIVE is not set
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-# CONFIG_POSIX_MQUEUE is not set
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-CONFIG_FAIR_GROUP_SCHED=y
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-CONFIG_SYSFS_DEPRECATED_V2=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-CONFIG_KALLSYMS=y
+-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-# CONFIG_EPOLL is not set
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLAB=y
+-# CONFIG_SLUB is not set
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-# CONFIG_KPROBES is not set
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_HAVE_KRETPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-CONFIG_MODULES=y
+-CONFIG_MODULE_UNLOAD=y
+-# CONFIG_MODULE_FORCE_UNLOAD is not set
+-# CONFIG_MODVERSIONS is not set
+-# CONFIG_MODULE_SRCVERSION_ALL is not set
+-# CONFIG_KMOD is not set
+-CONFIG_BLOCK=y
+-# CONFIG_LBD is not set
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MULTIPLATFORM is not set
+-# CONFIG_PPC_82xx is not set
+-CONFIG_PPC_83xx=y
+-# CONFIG_PPC_86xx is not set
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-CONFIG_MPC83xx=y
+-# CONFIG_MPC831x_RDB is not set
+-# CONFIG_MPC832x_MDS is not set
+-# CONFIG_MPC832x_RDB is not set
+-# CONFIG_MPC834x_MDS is not set
+-# CONFIG_MPC834x_ITX is not set
+-# CONFIG_MPC836x_MDS is not set
+-# CONFIG_MPC837x_MDS is not set
+-CONFIG_MPC837x_RDB=y
+-# CONFIG_SBC834x is not set
+-CONFIG_PPC_MPC837x=y
+-CONFIG_IPIC=y
+-# CONFIG_MPIC is not set
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-# CONFIG_FSL_ULI1575 is not set
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-# CONFIG_TICK_ONESHOT is not set
+-# CONFIG_NO_HZ is not set
+-# CONFIG_HIGH_RES_TIMERS is not set
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_BINFMT_ELF=y
+-# CONFIG_BINFMT_MISC is not set
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_RESOURCES_64BIT is not set
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-CONFIG_PROC_DEVICETREE=y
+-# CONFIG_CMDLINE_BOOL is not set
+-# CONFIG_PM is not set
+-CONFIG_SECCOMP=y
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_GENERIC_ISA_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_FSL_SOC=y
+-# CONFIG_PCI is not set
+-# CONFIG_PCI_DOMAINS is not set
+-# CONFIG_PCI_SYSCALL is not set
+-# CONFIG_ARCH_SUPPORTS_MSI is not set
+-# CONFIG_PCCARD is not set
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_BOOT_LOAD=0x00800000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-CONFIG_IP_MULTICAST=y
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_IP_MROUTE is not set
+-# CONFIG_ARPD is not set
+-CONFIG_SYN_COOKIES=y
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_BEET is not set
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-# CONFIG_FW_LOADER is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-# CONFIG_CONNECTOR is not set
+-# CONFIG_MTD is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-CONFIG_BLK_DEV_LOOP=y
+-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=32768
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-# CONFIG_IDE is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-CONFIG_SCSI=y
+-CONFIG_SCSI_DMA=y
+-# CONFIG_SCSI_TGT is not set
+-# CONFIG_SCSI_NETLINK is not set
+-CONFIG_SCSI_PROC_FS=y
+-
+-#
+-# SCSI support type (disk, tape, CD-ROM)
+-#
+-CONFIG_BLK_DEV_SD=y
+-# CONFIG_CHR_DEV_ST is not set
+-# CONFIG_CHR_DEV_OSST is not set
+-# CONFIG_BLK_DEV_SR is not set
+-CONFIG_CHR_DEV_SG=y
+-# CONFIG_CHR_DEV_SCH is not set
+-
+-#
+-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+-#
+-# CONFIG_SCSI_MULTI_LUN is not set
+-# CONFIG_SCSI_CONSTANTS is not set
+-# CONFIG_SCSI_LOGGING is not set
+-# CONFIG_SCSI_SCAN_ASYNC is not set
+-CONFIG_SCSI_WAIT_SCAN=m
+-
+-#
+-# SCSI Transports
+-#
+-# CONFIG_SCSI_SPI_ATTRS is not set
+-# CONFIG_SCSI_FC_ATTRS is not set
+-# CONFIG_SCSI_ISCSI_ATTRS is not set
+-# CONFIG_SCSI_SAS_LIBSAS is not set
+-# CONFIG_SCSI_SRP_ATTRS is not set
+-CONFIG_SCSI_LOWLEVEL=y
+-# CONFIG_ISCSI_TCP is not set
+-# CONFIG_SCSI_DEBUG is not set
+-CONFIG_ATA=y
+-# CONFIG_ATA_NONSTANDARD is not set
+-# CONFIG_SATA_MV is not set
+-CONFIG_SATA_FSL=y
+-# CONFIG_PATA_PLATFORM is not set
+-CONFIG_MD=y
+-CONFIG_BLK_DEV_MD=y
+-# CONFIG_MD_LINEAR is not set
+-# CONFIG_MD_RAID0 is not set
+-CONFIG_MD_RAID1=y
+-# CONFIG_MD_RAID10 is not set
+-CONFIG_MD_RAID456=y
+-CONFIG_MD_RAID5_RESHAPE=y
+-# CONFIG_MD_MULTIPATH is not set
+-# CONFIG_MD_FAULTY is not set
+-# CONFIG_BLK_DEV_DM is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-CONFIG_PHYLIB=y
+-
+-#
+-# MII PHY device drivers
+-#
+-CONFIG_MARVELL_PHY=y
+-# CONFIG_DAVICOM_PHY is not set
+-# CONFIG_QSEMI_PHY is not set
+-# CONFIG_LXT_PHY is not set
+-# CONFIG_CICADA_PHY is not set
+-# CONFIG_VITESSE_PHY is not set
+-# CONFIG_SMSC_PHY is not set
+-# CONFIG_BROADCOM_PHY is not set
+-# CONFIG_ICPLUS_PHY is not set
+-# CONFIG_REALTEK_PHY is not set
+-# CONFIG_FIXED_PHY is not set
+-# CONFIG_MDIO_BITBANG is not set
+-CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
+-# CONFIG_IBM_NEW_EMAC_ZMII is not set
+-# CONFIG_IBM_NEW_EMAC_RGMII is not set
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-# CONFIG_B44 is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_E1000E_ENABLED is not set
+-CONFIG_GIANFAR=y
+-CONFIG_GFAR_NAPI=y
+-# CONFIG_NETDEV_10000 is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-# CONFIG_WAN is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-CONFIG_INPUT=y
+-# CONFIG_INPUT_FF_MEMLESS is not set
+-# CONFIG_INPUT_POLLDEV is not set
+-
+-#
+-# Userland interfaces
+-#
+-# CONFIG_INPUT_MOUSEDEV is not set
+-# CONFIG_INPUT_JOYDEV is not set
+-# CONFIG_INPUT_EVDEV is not set
+-# CONFIG_INPUT_EVBUG is not set
+-
+-#
+-# Input Device Drivers
+-#
+-# CONFIG_INPUT_KEYBOARD is not set
+-# CONFIG_INPUT_MOUSE is not set
+-# CONFIG_INPUT_JOYSTICK is not set
+-# CONFIG_INPUT_TABLET is not set
+-# CONFIG_INPUT_TOUCHSCREEN is not set
+-# CONFIG_INPUT_MISC is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-CONFIG_SERIAL_8250_NR_UARTS=4
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-# CONFIG_SERIAL_8250_EXTENDED is not set
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_OF_PLATFORM is not set
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-# CONFIG_HW_RANDOM is not set
+-# CONFIG_NVRAM is not set
+-CONFIG_GEN_RTC=y
+-# CONFIG_GEN_RTC_X is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_I2C=y
+-CONFIG_I2C_BOARDINFO=y
+-CONFIG_I2C_CHARDEV=y
+-
+-#
+-# I2C Algorithms
+-#
+-# CONFIG_I2C_ALGOBIT is not set
+-# CONFIG_I2C_ALGOPCF is not set
+-# CONFIG_I2C_ALGOPCA is not set
+-
+-#
+-# I2C Hardware Bus support
+-#
+-CONFIG_I2C_MPC=y
+-# CONFIG_I2C_OCORES is not set
+-# CONFIG_I2C_PARPORT_LIGHT is not set
+-# CONFIG_I2C_SIMTEC is not set
+-# CONFIG_I2C_TAOS_EVM is not set
+-# CONFIG_I2C_STUB is not set
+-
+-#
+-# Miscellaneous I2C Chip support
+-#
+-# CONFIG_DS1682 is not set
+-# CONFIG_SENSORS_EEPROM is not set
+-# CONFIG_SENSORS_PCF8574 is not set
+-# CONFIG_PCF8575 is not set
+-# CONFIG_SENSORS_PCF8591 is not set
+-# CONFIG_TPS65010 is not set
+-# CONFIG_SENSORS_MAX6875 is not set
+-# CONFIG_SENSORS_TSL2550 is not set
+-# CONFIG_I2C_DEBUG_CORE is not set
+-# CONFIG_I2C_DEBUG_ALGO is not set
+-# CONFIG_I2C_DEBUG_BUS is not set
+-# CONFIG_I2C_DEBUG_CHIP is not set
+-
+-#
+-# SPI support
+-#
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-CONFIG_HWMON=y
+-# CONFIG_HWMON_VID is not set
+-# CONFIG_SENSORS_AD7418 is not set
+-# CONFIG_SENSORS_ADM1021 is not set
+-# CONFIG_SENSORS_ADM1025 is not set
+-# CONFIG_SENSORS_ADM1026 is not set
+-# CONFIG_SENSORS_ADM1029 is not set
+-# CONFIG_SENSORS_ADM1031 is not set
+-# CONFIG_SENSORS_ADM9240 is not set
+-# CONFIG_SENSORS_ADT7470 is not set
+-# CONFIG_SENSORS_ADT7473 is not set
+-# CONFIG_SENSORS_ATXP1 is not set
+-# CONFIG_SENSORS_DS1621 is not set
+-# CONFIG_SENSORS_F71805F is not set
+-# CONFIG_SENSORS_F71882FG is not set
+-# CONFIG_SENSORS_F75375S is not set
+-# CONFIG_SENSORS_GL518SM is not set
+-# CONFIG_SENSORS_GL520SM is not set
+-# CONFIG_SENSORS_IT87 is not set
+-# CONFIG_SENSORS_LM63 is not set
+-# CONFIG_SENSORS_LM75 is not set
+-# CONFIG_SENSORS_LM77 is not set
+-# CONFIG_SENSORS_LM78 is not set
+-# CONFIG_SENSORS_LM80 is not set
+-# CONFIG_SENSORS_LM83 is not set
+-# CONFIG_SENSORS_LM85 is not set
+-# CONFIG_SENSORS_LM87 is not set
+-# CONFIG_SENSORS_LM90 is not set
+-# CONFIG_SENSORS_LM92 is not set
+-# CONFIG_SENSORS_LM93 is not set
+-# CONFIG_SENSORS_MAX1619 is not set
+-# CONFIG_SENSORS_MAX6650 is not set
+-# CONFIG_SENSORS_PC87360 is not set
+-# CONFIG_SENSORS_PC87427 is not set
+-# CONFIG_SENSORS_DME1737 is not set
+-# CONFIG_SENSORS_SMSC47M1 is not set
+-# CONFIG_SENSORS_SMSC47M192 is not set
+-# CONFIG_SENSORS_SMSC47B397 is not set
+-# CONFIG_SENSORS_ADS7828 is not set
+-# CONFIG_SENSORS_THMC50 is not set
+-# CONFIG_SENSORS_VT1211 is not set
+-# CONFIG_SENSORS_W83781D is not set
+-# CONFIG_SENSORS_W83791D is not set
+-# CONFIG_SENSORS_W83792D is not set
+-# CONFIG_SENSORS_W83793 is not set
+-# CONFIG_SENSORS_W83L785TS is not set
+-# CONFIG_SENSORS_W83L786NG is not set
+-# CONFIG_SENSORS_W83627HF is not set
+-# CONFIG_SENSORS_W83627EHF is not set
+-# CONFIG_HWMON_DEBUG_CHIP is not set
+-# CONFIG_THERMAL is not set
+-CONFIG_WATCHDOG=y
+-# CONFIG_WATCHDOG_NOWAYOUT is not set
+-
+-#
+-# Watchdog Device Drivers
+-#
+-# CONFIG_SOFT_WATCHDOG is not set
+-CONFIG_83xx_WDT=y
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-CONFIG_DAB=y
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_VGASTATE is not set
+-CONFIG_VIDEO_OUTPUT_CONTROL=m
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-CONFIG_HID_SUPPORT=y
+-CONFIG_HID=y
+-# CONFIG_HID_DEBUG is not set
+-# CONFIG_HIDRAW is not set
+-CONFIG_USB_SUPPORT=y
+-CONFIG_USB_ARCH_HAS_HCD=y
+-# CONFIG_USB_ARCH_HAS_OHCI is not set
+-CONFIG_USB_ARCH_HAS_EHCI=y
+-CONFIG_USB=y
+-# CONFIG_USB_DEBUG is not set
+-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+-
+-#
+-# Miscellaneous USB options
+-#
+-# CONFIG_USB_DEVICEFS is not set
+-CONFIG_USB_DEVICE_CLASS=y
+-# CONFIG_USB_DYNAMIC_MINORS is not set
+-# CONFIG_USB_OTG is not set
+-
+-#
+-# USB Host Controller Drivers
+-#
+-CONFIG_USB_EHCI_HCD=y
+-CONFIG_USB_EHCI_ROOT_HUB_TT=y
+-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+-CONFIG_USB_EHCI_FSL=y
+-CONFIG_USB_EHCI_HCD_PPC_OF=y
+-# CONFIG_USB_ISP116X_HCD is not set
+-# CONFIG_USB_SL811_HCD is not set
+-# CONFIG_USB_R8A66597_HCD is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_EDAC is not set
+-# CONFIG_RTC_CLASS is not set
+-# CONFIG_DMADEVICES is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=y
+-CONFIG_EXT3_FS_XATTR=y
+-# CONFIG_EXT3_FS_POSIX_ACL is not set
+-# CONFIG_EXT3_FS_SECURITY is not set
+-# CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=y
+-CONFIG_FS_MBCACHE=y
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-# CONFIG_MSDOS_FS is not set
+-# CONFIG_VFAT_FS is not set
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-# CONFIG_CRAMFS is not set
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-CONFIG_NFS_V3=y
+-# CONFIG_NFS_V3_ACL is not set
+-CONFIG_NFS_V4=y
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_LOCKD_V4=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-CONFIG_SUNRPC_GSS=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-CONFIG_RPCSEC_GSS_KRB5=y
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-CONFIG_PARTITION_ADVANCED=y
+-# CONFIG_ACORN_PARTITION is not set
+-# CONFIG_OSF_PARTITION is not set
+-# CONFIG_AMIGA_PARTITION is not set
+-# CONFIG_ATARI_PARTITION is not set
+-# CONFIG_MAC_PARTITION is not set
+-CONFIG_MSDOS_PARTITION=y
+-# CONFIG_BSD_DISKLABEL is not set
+-# CONFIG_MINIX_SUBPARTITION is not set
+-# CONFIG_SOLARIS_X86_PARTITION is not set
+-# CONFIG_UNIXWARE_DISKLABEL is not set
+-# CONFIG_LDM_PARTITION is not set
+-# CONFIG_SGI_PARTITION is not set
+-# CONFIG_ULTRIX_PARTITION is not set
+-# CONFIG_SUN_PARTITION is not set
+-# CONFIG_KARMA_PARTITION is not set
+-# CONFIG_EFI_PARTITION is not set
+-# CONFIG_SYSV68_PARTITION is not set
+-# CONFIG_NLS is not set
+-# CONFIG_DLM is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-# CONFIG_ENABLE_MUST_CHECK is not set
+-# CONFIG_MAGIC_SYSRQ is not set
+-# CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
+-# CONFIG_HEADERS_CHECK is not set
+-# CONFIG_DEBUG_KERNEL is not set
+-# CONFIG_DEBUG_BUGVERBOSE is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_PPC_EARLY_DEBUG is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_XOR_BLOCKS=y
+-CONFIG_ASYNC_CORE=y
+-CONFIG_ASYNC_MEMCPY=y
+-CONFIG_ASYNC_XOR=y
+-CONFIG_CRYPTO=y
+-CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_BLKCIPHER=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-CONFIG_CRYPTO_MANAGER=y
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-CONFIG_CRYPTO_MD5=y
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-CONFIG_CRYPTO_ECB=m
+-CONFIG_CRYPTO_CBC=y
+-CONFIG_CRYPTO_PCBC=m
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-CONFIG_CRYPTO_DES=y
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_TEST is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_PPC_CLOCK is not set
+--- a/arch/powerpc/configs/mpc83xx_defconfig
++++ b/arch/powerpc/configs/mpc83xx_defconfig
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc6
+-# Mon Mar 24 08:48:25 2008
++# Linux kernel version: 2.6.25-rc9
++# Tue Apr 15 18:07:36 2008
+ #
+ # CONFIG_PPC64 is not set
+ 
+@@ -201,6 +201,7 @@ CONFIG_PREEMPT_NONE=y
+ # CONFIG_PREEMPT is not set
+ CONFIG_BINFMT_ELF=y
+ # CONFIG_BINFMT_MISC is not set
++CONFIG_FORCE_MAX_ZONEORDER=11
+ CONFIG_MATH_EMULATION=y
+ # CONFIG_IOMMU_HELPER is not set
+ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+@@ -353,7 +354,90 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
+ # CONFIG_FW_LOADER is not set
+ # CONFIG_SYS_HYPERVISOR is not set
+ # CONFIG_CONNECTOR is not set
+-# CONFIG_MTD is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++# CONFIG_MTD_CMDLINE_PARTS is not set
++CONFIG_MTD_OF_PARTS=y
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PHYSMAP is not set
++CONFIG_MTD_PHYSMAP_OF=y
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++CONFIG_MTD_NAND=y
++CONFIG_MTD_NAND_VERIFY_WRITE=y
++# CONFIG_MTD_NAND_ECC_SMC is not set
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
++# CONFIG_MTD_NAND_NANDSIM is not set
++# CONFIG_MTD_NAND_PLATFORM is not set
++# CONFIG_MTD_ALAUDA is not set
++CONFIG_MTD_NAND_FSL_ELBC=y
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
+ CONFIG_OF_DEVICE=y
+ # CONFIG_PARPORT is not set
+ CONFIG_BLK_DEV=y
+@@ -362,6 +446,7 @@ CONFIG_BLK_DEV=y
+ CONFIG_BLK_DEV_LOOP=y
+ # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+ # CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_UB is not set
+ CONFIG_BLK_DEV_RAM=y
+ CONFIG_BLK_DEV_RAM_COUNT=16
+ CONFIG_BLK_DEV_RAM_SIZE=32768
+@@ -469,6 +554,15 @@ CONFIG_NETDEV_10000=y
+ #
+ # CONFIG_WLAN_PRE80211 is not set
+ # CONFIG_WLAN_80211 is not set
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET is not set
+ # CONFIG_WAN is not set
+ # CONFIG_PPP is not set
+ # CONFIG_SLIP is not set
+@@ -563,6 +657,7 @@ CONFIG_I2C_MPC=y
+ # CONFIG_I2C_SIMTEC is not set
+ # CONFIG_I2C_TAOS_EVM is not set
+ # CONFIG_I2C_STUB is not set
++# CONFIG_I2C_TINY_USB is not set
+ 
+ #
+ # Miscellaneous I2C Chip support
+@@ -648,6 +743,11 @@ CONFIG_WATCHDOG=y
+ CONFIG_83xx_WDT=y
+ 
+ #
++# USB-based Watchdog Cards
++#
++# CONFIG_USBPCWATCHDOG is not set
++
++#
+ # Sonics Silicon Backplane
+ #
+ CONFIG_SSB_POSSIBLE=y
+@@ -664,6 +764,7 @@ CONFIG_SSB_POSSIBLE=y
+ # CONFIG_VIDEO_DEV is not set
+ # CONFIG_DVB_CORE is not set
+ CONFIG_DAB=y
++# CONFIG_USB_DABUSB is not set
+ 
+ #
+ # Graphics support
+@@ -686,6 +787,14 @@ CONFIG_HID_SUPPORT=y
+ CONFIG_HID=y
+ # CONFIG_HID_DEBUG is not set
+ # CONFIG_HIDRAW is not set
++
++#
++# USB Input Devices
++#
++CONFIG_USB_HID=y
++# CONFIG_USB_HIDINPUT_POWERBOOK is not set
++# CONFIG_HID_FF is not set
++# CONFIG_USB_HIDDEV is not set
+ CONFIG_USB_SUPPORT=y
+ CONFIG_USB_ARCH_HAS_HCD=y
+ # CONFIG_USB_ARCH_HAS_OHCI is not set
+@@ -715,8 +824,55 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
+ # CONFIG_USB_R8A66597_HCD is not set
+ 
+ #
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++# CONFIG_USB_PRINTER is not set
++
++#
+ # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+ #
++
++#
++# may also be needed; see USB_STORAGE Help for more information
++#
++# CONFIG_USB_STORAGE is not set
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++CONFIG_USB_MON=y
++
++#
++# USB port drivers
++#
++# CONFIG_USB_SERIAL is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_AUERSWALD is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_PHIDGET is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_SISUSBVGA is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
+ # CONFIG_USB_GADGET is not set
+ # CONFIG_MMC is not set
+ # CONFIG_MEMSTICK is not set
+@@ -792,6 +948,7 @@ CONFIG_TMPFS=y
+ # CONFIG_BEFS_FS is not set
+ # CONFIG_BFS_FS is not set
+ # CONFIG_EFS_FS is not set
++# CONFIG_JFFS2_FS is not set
+ # CONFIG_CRAMFS is not set
+ # CONFIG_VXFS_FS is not set
+ # CONFIG_MINIX_FS is not set
+@@ -862,6 +1019,7 @@ CONFIG_PLIST=y
+ CONFIG_HAS_IOMEM=y
+ CONFIG_HAS_IOPORT=y
+ CONFIG_HAS_DMA=y
++CONFIG_HAVE_LMB=y
+ 
+ #
+ # Kernel hacking
+--- a/arch/powerpc/configs/mpc8540_ads_defconfig
++++ /dev/null
+@@ -1,796 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc6
+-# Mon Mar 24 08:48:25 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-# CONFIG_6xx is not set
+-CONFIG_PPC_85xx=y
+-# CONFIG_PPC_8xx is not set
+-# CONFIG_40x is not set
+-# CONFIG_44x is not set
+-# CONFIG_E200 is not set
+-CONFIG_E500=y
+-CONFIG_BOOKE=y
+-CONFIG_FSL_BOOKE=y
+-CONFIG_FSL_EMB_PERFMON=y
+-# CONFIG_PHYS_64BIT is not set
+-CONFIG_SPE=y
+-# CONFIG_PPC_MM_SLICES is not set
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-CONFIG_DEFAULT_UIMAGE=y
+-# CONFIG_PPC_DCR_NATIVE is not set
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-# CONFIG_POSIX_MQUEUE is not set
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-# CONFIG_FAIR_GROUP_SCHED is not set
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-CONFIG_SYSFS_DEPRECATED_V2=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-CONFIG_KALLSYMS=y
+-# CONFIG_KALLSYMS_ALL is not set
+-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-CONFIG_EPOLL=y
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLUB_DEBUG=y
+-# CONFIG_SLAB is not set
+-CONFIG_SLUB=y
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_HAVE_KRETPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-# CONFIG_MODULES is not set
+-CONFIG_BLOCK=y
+-# CONFIG_LBD is not set
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-CONFIG_MPC85xx=y
+-CONFIG_MPC8540_ADS=y
+-# CONFIG_MPC8560_ADS is not set
+-# CONFIG_MPC85xx_CDS is not set
+-# CONFIG_MPC85xx_MDS is not set
+-# CONFIG_MPC85xx_DS is not set
+-# CONFIG_STX_GP3 is not set
+-# CONFIG_TQM8540 is not set
+-# CONFIG_TQM8541 is not set
+-# CONFIG_TQM8555 is not set
+-# CONFIG_TQM8560 is not set
+-# CONFIG_SBC8548 is not set
+-# CONFIG_SBC8560 is not set
+-# CONFIG_IPIC is not set
+-CONFIG_MPIC=y
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-# CONFIG_CPM2 is not set
+-# CONFIG_FSL_ULI1575 is not set
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-CONFIG_TICK_ONESHOT=y
+-CONFIG_NO_HZ=y
+-CONFIG_HIGH_RES_TIMERS=y
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_BINFMT_ELF=y
+-CONFIG_BINFMT_MISC=y
+-CONFIG_MATH_EMULATION=y
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_RESOURCES_64BIT is not set
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-CONFIG_PROC_DEVICETREE=y
+-# CONFIG_CMDLINE_BOOL is not set
+-# CONFIG_PM is not set
+-# CONFIG_SECCOMP is not set
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_FSL_SOC=y
+-# CONFIG_PCI is not set
+-# CONFIG_PCI_DOMAINS is not set
+-# CONFIG_PCI_SYSCALL is not set
+-# CONFIG_ARCH_SUPPORTS_MSI is not set
+-# CONFIG_PCCARD is not set
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_BOOT_LOAD=0x00800000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-CONFIG_XFRM=y
+-CONFIG_XFRM_USER=y
+-# CONFIG_XFRM_SUB_POLICY is not set
+-# CONFIG_XFRM_MIGRATE is not set
+-# CONFIG_XFRM_STATISTICS is not set
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-CONFIG_IP_MULTICAST=y
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_IP_MROUTE is not set
+-# CONFIG_ARPD is not set
+-CONFIG_SYN_COOKIES=y
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-CONFIG_INET_XFRM_MODE_TRANSPORT=y
+-CONFIG_INET_XFRM_MODE_TUNNEL=y
+-CONFIG_INET_XFRM_MODE_BEET=y
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-# CONFIG_FW_LOADER is not set
+-# CONFIG_DEBUG_DRIVER is not set
+-# CONFIG_DEBUG_DEVRES is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-# CONFIG_CONNECTOR is not set
+-# CONFIG_MTD is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-CONFIG_BLK_DEV_LOOP=y
+-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=32768
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-# CONFIG_IDE is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-# CONFIG_SCSI is not set
+-# CONFIG_SCSI_DMA is not set
+-# CONFIG_SCSI_NETLINK is not set
+-# CONFIG_ATA is not set
+-# CONFIG_MD is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-CONFIG_PHYLIB=y
+-
+-#
+-# MII PHY device drivers
+-#
+-# CONFIG_MARVELL_PHY is not set
+-# CONFIG_DAVICOM_PHY is not set
+-# CONFIG_QSEMI_PHY is not set
+-# CONFIG_LXT_PHY is not set
+-# CONFIG_CICADA_PHY is not set
+-# CONFIG_VITESSE_PHY is not set
+-# CONFIG_SMSC_PHY is not set
+-# CONFIG_BROADCOM_PHY is not set
+-# CONFIG_ICPLUS_PHY is not set
+-# CONFIG_REALTEK_PHY is not set
+-# CONFIG_FIXED_PHY is not set
+-# CONFIG_MDIO_BITBANG is not set
+-CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
+-# CONFIG_IBM_NEW_EMAC_ZMII is not set
+-# CONFIG_IBM_NEW_EMAC_RGMII is not set
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-# CONFIG_B44 is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_E1000E_ENABLED is not set
+-CONFIG_GIANFAR=y
+-CONFIG_GFAR_NAPI=y
+-CONFIG_NETDEV_10000=y
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-# CONFIG_WAN is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-CONFIG_INPUT=y
+-# CONFIG_INPUT_FF_MEMLESS is not set
+-# CONFIG_INPUT_POLLDEV is not set
+-
+-#
+-# Userland interfaces
+-#
+-# CONFIG_INPUT_MOUSEDEV is not set
+-# CONFIG_INPUT_JOYDEV is not set
+-# CONFIG_INPUT_EVDEV is not set
+-# CONFIG_INPUT_EVBUG is not set
+-
+-#
+-# Input Device Drivers
+-#
+-# CONFIG_INPUT_KEYBOARD is not set
+-# CONFIG_INPUT_MOUSE is not set
+-# CONFIG_INPUT_JOYSTICK is not set
+-# CONFIG_INPUT_TABLET is not set
+-# CONFIG_INPUT_TOUCHSCREEN is not set
+-# CONFIG_INPUT_MISC is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-CONFIG_SERIAL_8250_NR_UARTS=4
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-# CONFIG_SERIAL_8250_EXTENDED is not set
+-CONFIG_SERIAL_8250_SHARE_IRQ=y
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_OF_PLATFORM is not set
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-# CONFIG_HW_RANDOM is not set
+-# CONFIG_NVRAM is not set
+-CONFIG_GEN_RTC=y
+-# CONFIG_GEN_RTC_X is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-# CONFIG_I2C is not set
+-
+-#
+-# SPI support
+-#
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-CONFIG_HWMON=y
+-# CONFIG_HWMON_VID is not set
+-# CONFIG_SENSORS_F71805F is not set
+-# CONFIG_SENSORS_F71882FG is not set
+-# CONFIG_SENSORS_IT87 is not set
+-# CONFIG_SENSORS_PC87360 is not set
+-# CONFIG_SENSORS_PC87427 is not set
+-# CONFIG_SENSORS_SMSC47M1 is not set
+-# CONFIG_SENSORS_SMSC47B397 is not set
+-# CONFIG_SENSORS_VT1211 is not set
+-# CONFIG_SENSORS_W83627HF is not set
+-# CONFIG_SENSORS_W83627EHF is not set
+-# CONFIG_HWMON_DEBUG_CHIP is not set
+-# CONFIG_THERMAL is not set
+-# CONFIG_WATCHDOG is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-CONFIG_DAB=y
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_VGASTATE is not set
+-CONFIG_VIDEO_OUTPUT_CONTROL=y
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-CONFIG_HID_SUPPORT=y
+-CONFIG_HID=y
+-# CONFIG_HID_DEBUG is not set
+-# CONFIG_HIDRAW is not set
+-CONFIG_USB_SUPPORT=y
+-# CONFIG_USB_ARCH_HAS_HCD is not set
+-# CONFIG_USB_ARCH_HAS_OHCI is not set
+-# CONFIG_USB_ARCH_HAS_EHCI is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_EDAC is not set
+-# CONFIG_RTC_CLASS is not set
+-# CONFIG_DMADEVICES is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=y
+-CONFIG_EXT3_FS_XATTR=y
+-# CONFIG_EXT3_FS_POSIX_ACL is not set
+-# CONFIG_EXT3_FS_SECURITY is not set
+-# CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=y
+-CONFIG_FS_MBCACHE=y
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-# CONFIG_MSDOS_FS is not set
+-# CONFIG_VFAT_FS is not set
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-# CONFIG_CRAMFS is not set
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-# CONFIG_NFS_V3 is not set
+-# CONFIG_NFS_V4 is not set
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-# CONFIG_RPCSEC_GSS_KRB5 is not set
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-CONFIG_PARTITION_ADVANCED=y
+-# CONFIG_ACORN_PARTITION is not set
+-# CONFIG_OSF_PARTITION is not set
+-# CONFIG_AMIGA_PARTITION is not set
+-# CONFIG_ATARI_PARTITION is not set
+-# CONFIG_MAC_PARTITION is not set
+-# CONFIG_MSDOS_PARTITION is not set
+-# CONFIG_LDM_PARTITION is not set
+-# CONFIG_SGI_PARTITION is not set
+-# CONFIG_ULTRIX_PARTITION is not set
+-# CONFIG_SUN_PARTITION is not set
+-# CONFIG_KARMA_PARTITION is not set
+-# CONFIG_EFI_PARTITION is not set
+-# CONFIG_SYSV68_PARTITION is not set
+-# CONFIG_NLS is not set
+-# CONFIG_DLM is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-# CONFIG_MAGIC_SYSRQ is not set
+-# CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
+-# CONFIG_HEADERS_CHECK is not set
+-CONFIG_DEBUG_KERNEL=y
+-# CONFIG_DEBUG_SHIRQ is not set
+-CONFIG_DETECT_SOFTLOCKUP=y
+-CONFIG_SCHED_DEBUG=y
+-# CONFIG_SCHEDSTATS is not set
+-# CONFIG_TIMER_STATS is not set
+-# CONFIG_SLUB_DEBUG_ON is not set
+-# CONFIG_SLUB_STATS is not set
+-# CONFIG_DEBUG_RT_MUTEXES is not set
+-# CONFIG_RT_MUTEX_TESTER is not set
+-# CONFIG_DEBUG_SPINLOCK is not set
+-CONFIG_DEBUG_MUTEXES=y
+-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+-# CONFIG_DEBUG_KOBJECT is not set
+-# CONFIG_DEBUG_BUGVERBOSE is not set
+-# CONFIG_DEBUG_INFO is not set
+-# CONFIG_DEBUG_VM is not set
+-# CONFIG_DEBUG_LIST is not set
+-# CONFIG_DEBUG_SG is not set
+-# CONFIG_BOOT_PRINTK_DELAY is not set
+-# CONFIG_BACKTRACE_SELF_TEST is not set
+-# CONFIG_FAULT_INJECTION is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_DEBUG_STACKOVERFLOW is not set
+-# CONFIG_DEBUG_STACK_USAGE is not set
+-# CONFIG_DEBUG_PAGEALLOC is not set
+-# CONFIG_DEBUGGER is not set
+-# CONFIG_BDI_SWITCH is not set
+-# CONFIG_PPC_EARLY_DEBUG is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-# CONFIG_CRYPTO_MANAGER is not set
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-# CONFIG_CRYPTO_MD5 is not set
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-# CONFIG_CRYPTO_ECB is not set
+-# CONFIG_CRYPTO_CBC is not set
+-# CONFIG_CRYPTO_PCBC is not set
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-# CONFIG_CRYPTO_DES is not set
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_PPC_CLOCK is not set
+--- a/arch/powerpc/configs/mpc8544_ds_defconfig
++++ /dev/null
+@@ -1,1549 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc7
+-# Mon Mar 31 11:37:03 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-# CONFIG_6xx is not set
+-CONFIG_PPC_85xx=y
+-# CONFIG_PPC_8xx is not set
+-# CONFIG_40x is not set
+-# CONFIG_44x is not set
+-# CONFIG_E200 is not set
+-CONFIG_E500=y
+-CONFIG_BOOKE=y
+-CONFIG_FSL_BOOKE=y
+-CONFIG_FSL_EMB_PERFMON=y
+-# CONFIG_PHYS_64BIT is not set
+-CONFIG_SPE=y
+-# CONFIG_PPC_MM_SLICES is not set
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-CONFIG_DEFAULT_UIMAGE=y
+-# CONFIG_PPC_DCR_NATIVE is not set
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-CONFIG_POSIX_MQUEUE=y
+-CONFIG_BSD_PROCESS_ACCT=y
+-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+-# CONFIG_TASKSTATS is not set
+-CONFIG_AUDIT=y
+-# CONFIG_AUDITSYSCALL is not set
+-CONFIG_IKCONFIG=y
+-CONFIG_IKCONFIG_PROC=y
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-# CONFIG_FAIR_GROUP_SCHED is not set
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-CONFIG_SYSFS_DEPRECATED_V2=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-CONFIG_KALLSYMS=y
+-CONFIG_KALLSYMS_ALL=y
+-CONFIG_KALLSYMS_EXTRA_PASS=y
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-CONFIG_EPOLL=y
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLUB_DEBUG=y
+-# CONFIG_SLAB is not set
+-CONFIG_SLUB=y
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-# CONFIG_KPROBES is not set
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_HAVE_KRETPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-CONFIG_MODULES=y
+-CONFIG_MODULE_UNLOAD=y
+-CONFIG_MODULE_FORCE_UNLOAD=y
+-CONFIG_MODVERSIONS=y
+-# CONFIG_MODULE_SRCVERSION_ALL is not set
+-CONFIG_KMOD=y
+-CONFIG_BLOCK=y
+-CONFIG_LBD=y
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-# CONFIG_DEFAULT_AS is not set
+-# CONFIG_DEFAULT_DEADLINE is not set
+-CONFIG_DEFAULT_CFQ=y
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="cfq"
+-CONFIG_CLASSIC_RCU=y
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-CONFIG_MPC85xx=y
+-# CONFIG_MPC8540_ADS is not set
+-# CONFIG_MPC8560_ADS is not set
+-# CONFIG_MPC85xx_CDS is not set
+-# CONFIG_MPC85xx_MDS is not set
+-CONFIG_MPC85xx_DS=y
+-# CONFIG_STX_GP3 is not set
+-# CONFIG_TQM8540 is not set
+-# CONFIG_TQM8541 is not set
+-# CONFIG_TQM8555 is not set
+-# CONFIG_TQM8560 is not set
+-# CONFIG_SBC8548 is not set
+-# CONFIG_SBC8560 is not set
+-# CONFIG_IPIC is not set
+-CONFIG_MPIC=y
+-# CONFIG_MPIC_WEIRD is not set
+-CONFIG_PPC_I8259=y
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-# CONFIG_CPM2 is not set
+-CONFIG_FSL_ULI1575=y
+-
+-#
+-# Kernel options
+-#
+-CONFIG_HIGHMEM=y
+-CONFIG_TICK_ONESHOT=y
+-CONFIG_NO_HZ=y
+-CONFIG_HIGH_RES_TIMERS=y
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_BINFMT_ELF=y
+-CONFIG_BINFMT_MISC=m
+-CONFIG_MATH_EMULATION=y
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_RESOURCES_64BIT is not set
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-CONFIG_PROC_DEVICETREE=y
+-# CONFIG_CMDLINE_BOOL is not set
+-# CONFIG_PM is not set
+-CONFIG_SECCOMP=y
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_GENERIC_ISA_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_FSL_SOC=y
+-CONFIG_FSL_PCI=y
+-CONFIG_PCI=y
+-CONFIG_PCI_DOMAINS=y
+-CONFIG_PCI_SYSCALL=y
+-# CONFIG_PCIEPORTBUS is not set
+-CONFIG_ARCH_SUPPORTS_MSI=y
+-# CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
+-# CONFIG_PCI_DEBUG is not set
+-# CONFIG_PCCARD is not set
+-# CONFIG_HOTPLUG_PCI is not set
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_BOOT_LOAD=0x00800000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-CONFIG_XFRM=y
+-CONFIG_XFRM_USER=y
+-# CONFIG_XFRM_SUB_POLICY is not set
+-# CONFIG_XFRM_MIGRATE is not set
+-# CONFIG_XFRM_STATISTICS is not set
+-CONFIG_NET_KEY=m
+-# CONFIG_NET_KEY_MIGRATE is not set
+-CONFIG_INET=y
+-CONFIG_IP_MULTICAST=y
+-CONFIG_IP_ADVANCED_ROUTER=y
+-CONFIG_ASK_IP_FIB_HASH=y
+-# CONFIG_IP_FIB_TRIE is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_MULTIPLE_TABLES=y
+-CONFIG_IP_ROUTE_MULTIPATH=y
+-CONFIG_IP_ROUTE_VERBOSE=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-CONFIG_IP_PNP_RARP=y
+-CONFIG_NET_IPIP=y
+-CONFIG_NET_IPGRE=y
+-CONFIG_NET_IPGRE_BROADCAST=y
+-CONFIG_IP_MROUTE=y
+-CONFIG_IP_PIMSM_V1=y
+-CONFIG_IP_PIMSM_V2=y
+-CONFIG_ARPD=y
+-# CONFIG_SYN_COOKIES is not set
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-CONFIG_INET_TUNNEL=y
+-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_BEET is not set
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-CONFIG_IPV6=y
+-# CONFIG_IPV6_PRIVACY is not set
+-# CONFIG_IPV6_ROUTER_PREF is not set
+-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+-# CONFIG_INET6_AH is not set
+-# CONFIG_INET6_ESP is not set
+-# CONFIG_INET6_IPCOMP is not set
+-# CONFIG_IPV6_MIP6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+-CONFIG_INET6_XFRM_MODE_TUNNEL=y
+-CONFIG_INET6_XFRM_MODE_BEET=y
+-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+-CONFIG_IPV6_SIT=y
+-# CONFIG_IPV6_TUNNEL is not set
+-# CONFIG_IPV6_MULTIPLE_TABLES is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-CONFIG_IP_SCTP=m
+-# CONFIG_SCTP_DBG_MSG is not set
+-# CONFIG_SCTP_DBG_OBJCNT is not set
+-# CONFIG_SCTP_HMAC_NONE is not set
+-# CONFIG_SCTP_HMAC_SHA1 is not set
+-CONFIG_SCTP_HMAC_MD5=y
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-CONFIG_FIB_RULES=y
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-CONFIG_FW_LOADER=y
+-# CONFIG_DEBUG_DRIVER is not set
+-# CONFIG_DEBUG_DEVRES is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-# CONFIG_CONNECTOR is not set
+-# CONFIG_MTD is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_CPQ_DA is not set
+-# CONFIG_BLK_CPQ_CISS_DA is not set
+-# CONFIG_BLK_DEV_DAC960 is not set
+-# CONFIG_BLK_DEV_UMEM is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-CONFIG_BLK_DEV_LOOP=y
+-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+-CONFIG_BLK_DEV_NBD=y
+-# CONFIG_BLK_DEV_SX8 is not set
+-# CONFIG_BLK_DEV_UB is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=131072
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_PHANTOM is not set
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_SGI_IOC4 is not set
+-# CONFIG_TIFM_CORE is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-# CONFIG_IDE is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-CONFIG_SCSI=y
+-CONFIG_SCSI_DMA=y
+-# CONFIG_SCSI_TGT is not set
+-# CONFIG_SCSI_NETLINK is not set
+-CONFIG_SCSI_PROC_FS=y
+-
+-#
+-# SCSI support type (disk, tape, CD-ROM)
+-#
+-CONFIG_BLK_DEV_SD=y
+-CONFIG_CHR_DEV_ST=y
+-# CONFIG_CHR_DEV_OSST is not set
+-CONFIG_BLK_DEV_SR=y
+-# CONFIG_BLK_DEV_SR_VENDOR is not set
+-CONFIG_CHR_DEV_SG=y
+-# CONFIG_CHR_DEV_SCH is not set
+-
+-#
+-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+-#
+-CONFIG_SCSI_MULTI_LUN=y
+-# CONFIG_SCSI_CONSTANTS is not set
+-CONFIG_SCSI_LOGGING=y
+-# CONFIG_SCSI_SCAN_ASYNC is not set
+-CONFIG_SCSI_WAIT_SCAN=m
+-
+-#
+-# SCSI Transports
+-#
+-# CONFIG_SCSI_SPI_ATTRS is not set
+-# CONFIG_SCSI_FC_ATTRS is not set
+-# CONFIG_SCSI_ISCSI_ATTRS is not set
+-# CONFIG_SCSI_SAS_LIBSAS is not set
+-# CONFIG_SCSI_SRP_ATTRS is not set
+-CONFIG_SCSI_LOWLEVEL=y
+-# CONFIG_ISCSI_TCP is not set
+-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+-# CONFIG_SCSI_3W_9XXX is not set
+-# CONFIG_SCSI_ACARD is not set
+-# CONFIG_SCSI_AACRAID is not set
+-# CONFIG_SCSI_AIC7XXX is not set
+-# CONFIG_SCSI_AIC7XXX_OLD is not set
+-# CONFIG_SCSI_AIC79XX is not set
+-# CONFIG_SCSI_AIC94XX is not set
+-# CONFIG_SCSI_DPT_I2O is not set
+-# CONFIG_SCSI_ADVANSYS is not set
+-# CONFIG_SCSI_ARCMSR is not set
+-# CONFIG_MEGARAID_NEWGEN is not set
+-# CONFIG_MEGARAID_LEGACY is not set
+-# CONFIG_MEGARAID_SAS is not set
+-# CONFIG_SCSI_HPTIOP is not set
+-# CONFIG_SCSI_BUSLOGIC is not set
+-# CONFIG_SCSI_DMX3191D is not set
+-# CONFIG_SCSI_EATA is not set
+-# CONFIG_SCSI_FUTURE_DOMAIN is not set
+-# CONFIG_SCSI_GDTH is not set
+-# CONFIG_SCSI_IPS is not set
+-# CONFIG_SCSI_INITIO is not set
+-# CONFIG_SCSI_INIA100 is not set
+-# CONFIG_SCSI_MVSAS is not set
+-# CONFIG_SCSI_STEX is not set
+-# CONFIG_SCSI_SYM53C8XX_2 is not set
+-# CONFIG_SCSI_IPR is not set
+-# CONFIG_SCSI_QLOGIC_1280 is not set
+-# CONFIG_SCSI_QLA_FC is not set
+-# CONFIG_SCSI_QLA_ISCSI is not set
+-# CONFIG_SCSI_LPFC is not set
+-# CONFIG_SCSI_DC395x is not set
+-# CONFIG_SCSI_DC390T is not set
+-# CONFIG_SCSI_NSP32 is not set
+-# CONFIG_SCSI_DEBUG is not set
+-# CONFIG_SCSI_SRP is not set
+-CONFIG_ATA=y
+-# CONFIG_ATA_NONSTANDARD is not set
+-CONFIG_SATA_AHCI=y
+-# CONFIG_SATA_SVW is not set
+-# CONFIG_ATA_PIIX is not set
+-# CONFIG_SATA_MV is not set
+-# CONFIG_SATA_NV is not set
+-# CONFIG_PDC_ADMA is not set
+-# CONFIG_SATA_QSTOR is not set
+-# CONFIG_SATA_PROMISE is not set
+-# CONFIG_SATA_SX4 is not set
+-# CONFIG_SATA_SIL is not set
+-# CONFIG_SATA_SIL24 is not set
+-# CONFIG_SATA_SIS is not set
+-# CONFIG_SATA_ULI is not set
+-# CONFIG_SATA_VIA is not set
+-# CONFIG_SATA_VITESSE is not set
+-# CONFIG_SATA_INIC162X is not set
+-# CONFIG_SATA_FSL is not set
+-CONFIG_PATA_ALI=y
+-# CONFIG_PATA_AMD is not set
+-# CONFIG_PATA_ARTOP is not set
+-# CONFIG_PATA_ATIIXP is not set
+-# CONFIG_PATA_CMD640_PCI is not set
+-# CONFIG_PATA_CMD64X is not set
+-# CONFIG_PATA_CS5520 is not set
+-# CONFIG_PATA_CS5530 is not set
+-# CONFIG_PATA_CYPRESS is not set
+-# CONFIG_PATA_EFAR is not set
+-# CONFIG_ATA_GENERIC is not set
+-# CONFIG_PATA_HPT366 is not set
+-# CONFIG_PATA_HPT37X is not set
+-# CONFIG_PATA_HPT3X2N is not set
+-# CONFIG_PATA_HPT3X3 is not set
+-# CONFIG_PATA_IT821X is not set
+-# CONFIG_PATA_IT8213 is not set
+-# CONFIG_PATA_JMICRON is not set
+-# CONFIG_PATA_TRIFLEX is not set
+-# CONFIG_PATA_MARVELL is not set
+-# CONFIG_PATA_MPIIX is not set
+-# CONFIG_PATA_OLDPIIX is not set
+-# CONFIG_PATA_NETCELL is not set
+-# CONFIG_PATA_NINJA32 is not set
+-# CONFIG_PATA_NS87410 is not set
+-# CONFIG_PATA_NS87415 is not set
+-# CONFIG_PATA_OPTI is not set
+-# CONFIG_PATA_OPTIDMA is not set
+-# CONFIG_PATA_PDC_OLD is not set
+-# CONFIG_PATA_RADISYS is not set
+-# CONFIG_PATA_RZ1000 is not set
+-# CONFIG_PATA_SC1200 is not set
+-# CONFIG_PATA_SERVERWORKS is not set
+-# CONFIG_PATA_PDC2027X is not set
+-# CONFIG_PATA_SIL680 is not set
+-# CONFIG_PATA_SIS is not set
+-# CONFIG_PATA_VIA is not set
+-# CONFIG_PATA_WINBOND is not set
+-# CONFIG_PATA_PLATFORM is not set
+-# CONFIG_MD is not set
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-# CONFIG_FIREWIRE is not set
+-# CONFIG_IEEE1394 is not set
+-# CONFIG_I2O is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-CONFIG_DUMMY=y
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_ARCNET is not set
+-CONFIG_PHYLIB=y
+-
+-#
+-# MII PHY device drivers
+-#
+-# CONFIG_MARVELL_PHY is not set
+-# CONFIG_DAVICOM_PHY is not set
+-# CONFIG_QSEMI_PHY is not set
+-# CONFIG_LXT_PHY is not set
+-# CONFIG_CICADA_PHY is not set
+-CONFIG_VITESSE_PHY=y
+-# CONFIG_SMSC_PHY is not set
+-# CONFIG_BROADCOM_PHY is not set
+-# CONFIG_ICPLUS_PHY is not set
+-# CONFIG_REALTEK_PHY is not set
+-# CONFIG_FIXED_PHY is not set
+-# CONFIG_MDIO_BITBANG is not set
+-CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
+-# CONFIG_HAPPYMEAL is not set
+-# CONFIG_SUNGEM is not set
+-# CONFIG_CASSINI is not set
+-# CONFIG_NET_VENDOR_3COM is not set
+-# CONFIG_NET_TULIP is not set
+-# CONFIG_HP100 is not set
+-# CONFIG_IBM_NEW_EMAC_ZMII is not set
+-# CONFIG_IBM_NEW_EMAC_RGMII is not set
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-# CONFIG_NET_PCI is not set
+-# CONFIG_B44 is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_ACENIC is not set
+-# CONFIG_DL2K is not set
+-# CONFIG_E1000 is not set
+-# CONFIG_E1000E is not set
+-# CONFIG_E1000E_ENABLED is not set
+-# CONFIG_IP1000 is not set
+-# CONFIG_IGB is not set
+-# CONFIG_NS83820 is not set
+-# CONFIG_HAMACHI is not set
+-# CONFIG_YELLOWFIN is not set
+-# CONFIG_R8169 is not set
+-# CONFIG_SIS190 is not set
+-# CONFIG_SKGE is not set
+-# CONFIG_SKY2 is not set
+-# CONFIG_SK98LIN is not set
+-# CONFIG_VIA_VELOCITY is not set
+-# CONFIG_TIGON3 is not set
+-# CONFIG_BNX2 is not set
+-CONFIG_GIANFAR=y
+-CONFIG_GFAR_NAPI=y
+-# CONFIG_QLA3XXX is not set
+-# CONFIG_ATL1 is not set
+-CONFIG_NETDEV_10000=y
+-# CONFIG_CHELSIO_T1 is not set
+-# CONFIG_CHELSIO_T3 is not set
+-# CONFIG_IXGBE is not set
+-# CONFIG_IXGB is not set
+-# CONFIG_S2IO is not set
+-# CONFIG_MYRI10GE is not set
+-# CONFIG_NETXEN_NIC is not set
+-# CONFIG_NIU is not set
+-# CONFIG_MLX4_CORE is not set
+-# CONFIG_TEHUTI is not set
+-# CONFIG_BNX2X is not set
+-# CONFIG_TR is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-
+-#
+-# USB Network Adapters
+-#
+-# CONFIG_USB_CATC is not set
+-# CONFIG_USB_KAWETH is not set
+-# CONFIG_USB_PEGASUS is not set
+-# CONFIG_USB_RTL8150 is not set
+-# CONFIG_USB_USBNET is not set
+-# CONFIG_WAN is not set
+-# CONFIG_FDDI is not set
+-# CONFIG_HIPPI is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NET_FC is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-CONFIG_INPUT=y
+-# CONFIG_INPUT_FF_MEMLESS is not set
+-# CONFIG_INPUT_POLLDEV is not set
+-
+-#
+-# Userland interfaces
+-#
+-# CONFIG_INPUT_MOUSEDEV is not set
+-# CONFIG_INPUT_JOYDEV is not set
+-# CONFIG_INPUT_EVDEV is not set
+-# CONFIG_INPUT_EVBUG is not set
+-
+-#
+-# Input Device Drivers
+-#
+-# CONFIG_INPUT_KEYBOARD is not set
+-# CONFIG_INPUT_MOUSE is not set
+-# CONFIG_INPUT_JOYSTICK is not set
+-# CONFIG_INPUT_TABLET is not set
+-# CONFIG_INPUT_TOUCHSCREEN is not set
+-# CONFIG_INPUT_MISC is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-CONFIG_SERIO=y
+-CONFIG_SERIO_I8042=y
+-CONFIG_SERIO_SERPORT=y
+-# CONFIG_SERIO_PCIPS2 is not set
+-CONFIG_SERIO_LIBPS2=y
+-# CONFIG_SERIO_RAW is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-CONFIG_VT=y
+-CONFIG_VT_CONSOLE=y
+-CONFIG_HW_CONSOLE=y
+-# CONFIG_VT_HW_CONSOLE_BINDING is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-# CONFIG_NOZOMI is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-CONFIG_SERIAL_8250_PCI=y
+-CONFIG_SERIAL_8250_NR_UARTS=2
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+-CONFIG_SERIAL_8250_EXTENDED=y
+-CONFIG_SERIAL_8250_MANY_PORTS=y
+-CONFIG_SERIAL_8250_SHARE_IRQ=y
+-CONFIG_SERIAL_8250_DETECT_IRQ=y
+-CONFIG_SERIAL_8250_RSA=y
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_JSM is not set
+-# CONFIG_SERIAL_OF_PLATFORM is not set
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-# CONFIG_HW_RANDOM is not set
+-CONFIG_NVRAM=y
+-# CONFIG_GEN_RTC is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_APPLICOM is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_DEVPORT=y
+-CONFIG_I2C=y
+-CONFIG_I2C_BOARDINFO=y
+-# CONFIG_I2C_CHARDEV is not set
+-
+-#
+-# I2C Algorithms
+-#
+-# CONFIG_I2C_ALGOBIT is not set
+-# CONFIG_I2C_ALGOPCF is not set
+-# CONFIG_I2C_ALGOPCA is not set
+-
+-#
+-# I2C Hardware Bus support
+-#
+-# CONFIG_I2C_ALI1535 is not set
+-# CONFIG_I2C_ALI1563 is not set
+-# CONFIG_I2C_ALI15X3 is not set
+-# CONFIG_I2C_AMD756 is not set
+-# CONFIG_I2C_AMD8111 is not set
+-# CONFIG_I2C_I801 is not set
+-# CONFIG_I2C_I810 is not set
+-# CONFIG_I2C_PIIX4 is not set
+-CONFIG_I2C_MPC=y
+-# CONFIG_I2C_NFORCE2 is not set
+-# CONFIG_I2C_OCORES is not set
+-# CONFIG_I2C_PARPORT_LIGHT is not set
+-# CONFIG_I2C_PROSAVAGE is not set
+-# CONFIG_I2C_SAVAGE4 is not set
+-# CONFIG_I2C_SIMTEC is not set
+-# CONFIG_I2C_SIS5595 is not set
+-# CONFIG_I2C_SIS630 is not set
+-# CONFIG_I2C_SIS96X is not set
+-# CONFIG_I2C_TAOS_EVM is not set
+-# CONFIG_I2C_STUB is not set
+-# CONFIG_I2C_TINY_USB is not set
+-# CONFIG_I2C_VIA is not set
+-# CONFIG_I2C_VIAPRO is not set
+-# CONFIG_I2C_VOODOO3 is not set
+-
+-#
+-# Miscellaneous I2C Chip support
+-#
+-# CONFIG_DS1682 is not set
+-CONFIG_SENSORS_EEPROM=y
+-# CONFIG_SENSORS_PCF8574 is not set
+-# CONFIG_PCF8575 is not set
+-# CONFIG_SENSORS_PCF8591 is not set
+-# CONFIG_TPS65010 is not set
+-# CONFIG_SENSORS_MAX6875 is not set
+-# CONFIG_SENSORS_TSL2550 is not set
+-# CONFIG_I2C_DEBUG_CORE is not set
+-# CONFIG_I2C_DEBUG_ALGO is not set
+-# CONFIG_I2C_DEBUG_BUS is not set
+-# CONFIG_I2C_DEBUG_CHIP is not set
+-
+-#
+-# SPI support
+-#
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-# CONFIG_HWMON is not set
+-# CONFIG_THERMAL is not set
+-# CONFIG_WATCHDOG is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-CONFIG_DVB_CORE=m
+-# CONFIG_DVB_CORE_ATTACH is not set
+-CONFIG_DVB_CAPTURE_DRIVERS=y
+-
+-#
+-# Supported SAA7146 based PCI Adapters
+-#
+-# CONFIG_TTPCI_EEPROM is not set
+-# CONFIG_DVB_BUDGET_CORE is not set
+-
+-#
+-# Supported USB Adapters
+-#
+-# CONFIG_DVB_USB is not set
+-# CONFIG_DVB_TTUSB_BUDGET is not set
+-# CONFIG_DVB_TTUSB_DEC is not set
+-# CONFIG_DVB_CINERGYT2 is not set
+-
+-#
+-# Supported FlexCopII (B2C2) Adapters
+-#
+-# CONFIG_DVB_B2C2_FLEXCOP is not set
+-
+-#
+-# Supported BT878 Adapters
+-#
+-
+-#
+-# Supported Pluto2 Adapters
+-#
+-# CONFIG_DVB_PLUTO2 is not set
+-
+-#
+-# Supported DVB Frontends
+-#
+-
+-#
+-# Customise DVB Frontends
+-#
+-# CONFIG_DVB_FE_CUSTOMISE is not set
+-
+-#
+-# DVB-S (satellite) frontends
+-#
+-# CONFIG_DVB_STV0299 is not set
+-# CONFIG_DVB_CX24110 is not set
+-# CONFIG_DVB_CX24123 is not set
+-# CONFIG_DVB_TDA8083 is not set
+-# CONFIG_DVB_MT312 is not set
+-# CONFIG_DVB_VES1X93 is not set
+-# CONFIG_DVB_S5H1420 is not set
+-# CONFIG_DVB_TDA10086 is not set
+-
+-#
+-# DVB-T (terrestrial) frontends
+-#
+-# CONFIG_DVB_SP8870 is not set
+-# CONFIG_DVB_SP887X is not set
+-# CONFIG_DVB_CX22700 is not set
+-# CONFIG_DVB_CX22702 is not set
+-# CONFIG_DVB_L64781 is not set
+-# CONFIG_DVB_TDA1004X is not set
+-# CONFIG_DVB_NXT6000 is not set
+-# CONFIG_DVB_MT352 is not set
+-# CONFIG_DVB_ZL10353 is not set
+-# CONFIG_DVB_DIB3000MB is not set
+-# CONFIG_DVB_DIB3000MC is not set
+-# CONFIG_DVB_DIB7000M is not set
+-# CONFIG_DVB_DIB7000P is not set
+-
+-#
+-# DVB-C (cable) frontends
+-#
+-# CONFIG_DVB_VES1820 is not set
+-# CONFIG_DVB_TDA10021 is not set
+-# CONFIG_DVB_TDA10023 is not set
+-# CONFIG_DVB_STV0297 is not set
+-
+-#
+-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+-#
+-# CONFIG_DVB_NXT200X is not set
+-# CONFIG_DVB_OR51211 is not set
+-# CONFIG_DVB_OR51132 is not set
+-# CONFIG_DVB_BCM3510 is not set
+-# CONFIG_DVB_LGDT330X is not set
+-# CONFIG_DVB_S5H1409 is not set
+-
+-#
+-# Tuners/PLL support
+-#
+-# CONFIG_DVB_PLL is not set
+-# CONFIG_DVB_TDA826X is not set
+-# CONFIG_DVB_TDA827X is not set
+-# CONFIG_DVB_TDA18271 is not set
+-# CONFIG_DVB_TUNER_QT1010 is not set
+-# CONFIG_DVB_TUNER_MT2060 is not set
+-# CONFIG_DVB_TUNER_MT2266 is not set
+-# CONFIG_DVB_TUNER_MT2131 is not set
+-# CONFIG_DVB_TUNER_DIB0070 is not set
+-# CONFIG_DVB_TUNER_XC5000 is not set
+-
+-#
+-# Miscellaneous devices
+-#
+-# CONFIG_DVB_LNBP21 is not set
+-# CONFIG_DVB_ISL6421 is not set
+-# CONFIG_DVB_TUA6100 is not set
+-CONFIG_DAB=y
+-# CONFIG_USB_DABUSB is not set
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_AGP is not set
+-# CONFIG_DRM is not set
+-# CONFIG_VGASTATE is not set
+-CONFIG_VIDEO_OUTPUT_CONTROL=y
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Console display driver support
+-#
+-CONFIG_VGA_CONSOLE=y
+-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+-CONFIG_DUMMY_CONSOLE=y
+-
+-#
+-# Sound
+-#
+-CONFIG_SOUND=y
+-
+-#
+-# Advanced Linux Sound Architecture
+-#
+-CONFIG_SND=y
+-CONFIG_SND_TIMER=y
+-CONFIG_SND_PCM=y
+-# CONFIG_SND_SEQUENCER is not set
+-# CONFIG_SND_MIXER_OSS is not set
+-# CONFIG_SND_PCM_OSS is not set
+-# CONFIG_SND_DYNAMIC_MINORS is not set
+-CONFIG_SND_SUPPORT_OLD_API=y
+-CONFIG_SND_VERBOSE_PROCFS=y
+-# CONFIG_SND_VERBOSE_PRINTK is not set
+-# CONFIG_SND_DEBUG is not set
+-
+-#
+-# Generic devices
+-#
+-CONFIG_SND_AC97_CODEC=y
+-# CONFIG_SND_DUMMY is not set
+-# CONFIG_SND_MTPAV is not set
+-# CONFIG_SND_SERIAL_U16550 is not set
+-# CONFIG_SND_MPU401 is not set
+-
+-#
+-# PCI devices
+-#
+-# CONFIG_SND_AD1889 is not set
+-# CONFIG_SND_ALS300 is not set
+-# CONFIG_SND_ALS4000 is not set
+-# CONFIG_SND_ALI5451 is not set
+-# CONFIG_SND_ATIIXP is not set
+-# CONFIG_SND_ATIIXP_MODEM is not set
+-# CONFIG_SND_AU8810 is not set
+-# CONFIG_SND_AU8820 is not set
+-# CONFIG_SND_AU8830 is not set
+-# CONFIG_SND_AZT3328 is not set
+-# CONFIG_SND_BT87X is not set
+-# CONFIG_SND_CA0106 is not set
+-# CONFIG_SND_CMIPCI is not set
+-# CONFIG_SND_OXYGEN is not set
+-# CONFIG_SND_CS4281 is not set
+-# CONFIG_SND_CS46XX is not set
+-# CONFIG_SND_CS5530 is not set
+-# CONFIG_SND_DARLA20 is not set
+-# CONFIG_SND_GINA20 is not set
+-# CONFIG_SND_LAYLA20 is not set
+-# CONFIG_SND_DARLA24 is not set
+-# CONFIG_SND_GINA24 is not set
+-# CONFIG_SND_LAYLA24 is not set
+-# CONFIG_SND_MONA is not set
+-# CONFIG_SND_MIA is not set
+-# CONFIG_SND_ECHO3G is not set
+-# CONFIG_SND_INDIGO is not set
+-# CONFIG_SND_INDIGOIO is not set
+-# CONFIG_SND_INDIGODJ is not set
+-# CONFIG_SND_EMU10K1 is not set
+-# CONFIG_SND_EMU10K1X is not set
+-# CONFIG_SND_ENS1370 is not set
+-# CONFIG_SND_ENS1371 is not set
+-# CONFIG_SND_ES1938 is not set
+-# CONFIG_SND_ES1968 is not set
+-# CONFIG_SND_FM801 is not set
+-# CONFIG_SND_HDA_INTEL is not set
+-# CONFIG_SND_HDSP is not set
+-# CONFIG_SND_HDSPM is not set
+-# CONFIG_SND_HIFIER is not set
+-# CONFIG_SND_ICE1712 is not set
+-# CONFIG_SND_ICE1724 is not set
+-CONFIG_SND_INTEL8X0=y
+-# CONFIG_SND_INTEL8X0M is not set
+-# CONFIG_SND_KORG1212 is not set
+-# CONFIG_SND_MAESTRO3 is not set
+-# CONFIG_SND_MIXART is not set
+-# CONFIG_SND_NM256 is not set
+-# CONFIG_SND_PCXHR is not set
+-# CONFIG_SND_RIPTIDE is not set
+-# CONFIG_SND_RME32 is not set
+-# CONFIG_SND_RME96 is not set
+-# CONFIG_SND_RME9652 is not set
+-# CONFIG_SND_SONICVIBES is not set
+-# CONFIG_SND_TRIDENT is not set
+-# CONFIG_SND_VIA82XX is not set
+-# CONFIG_SND_VIA82XX_MODEM is not set
+-# CONFIG_SND_VIRTUOSO is not set
+-# CONFIG_SND_VX222 is not set
+-# CONFIG_SND_YMFPCI is not set
+-# CONFIG_SND_AC97_POWER_SAVE is not set
+-
+-#
+-# ALSA PowerMac devices
+-#
+-
+-#
+-# ALSA PowerPC devices
+-#
+-
+-#
+-# USB devices
+-#
+-# CONFIG_SND_USB_AUDIO is not set
+-# CONFIG_SND_USB_USX2Y is not set
+-# CONFIG_SND_USB_CAIAQ is not set
+-
+-#
+-# System on Chip audio support
+-#
+-# CONFIG_SND_SOC is not set
+-
+-#
+-# SoC Audio support for SuperH
+-#
+-
+-#
+-# ALSA SoC audio for Freescale SOCs
+-#
+-
+-#
+-# Open Sound System
+-#
+-# CONFIG_SOUND_PRIME is not set
+-CONFIG_AC97_BUS=y
+-CONFIG_HID_SUPPORT=y
+-CONFIG_HID=y
+-# CONFIG_HID_DEBUG is not set
+-# CONFIG_HIDRAW is not set
+-
+-#
+-# USB Input Devices
+-#
+-CONFIG_USB_HID=y
+-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+-# CONFIG_HID_FF is not set
+-# CONFIG_USB_HIDDEV is not set
+-CONFIG_USB_SUPPORT=y
+-CONFIG_USB_ARCH_HAS_HCD=y
+-CONFIG_USB_ARCH_HAS_OHCI=y
+-CONFIG_USB_ARCH_HAS_EHCI=y
+-CONFIG_USB=y
+-# CONFIG_USB_DEBUG is not set
+-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+-
+-#
+-# Miscellaneous USB options
+-#
+-CONFIG_USB_DEVICEFS=y
+-CONFIG_USB_DEVICE_CLASS=y
+-# CONFIG_USB_DYNAMIC_MINORS is not set
+-# CONFIG_USB_OTG is not set
+-
+-#
+-# USB Host Controller Drivers
+-#
+-CONFIG_USB_EHCI_HCD=y
+-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+-# CONFIG_USB_EHCI_FSL is not set
+-CONFIG_USB_EHCI_HCD_PPC_OF=y
+-# CONFIG_USB_ISP116X_HCD is not set
+-CONFIG_USB_OHCI_HCD=y
+-CONFIG_USB_OHCI_HCD_PPC_OF=y
+-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+-CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+-CONFIG_USB_OHCI_HCD_PCI=y
+-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+-# CONFIG_USB_UHCI_HCD is not set
+-# CONFIG_USB_SL811_HCD is not set
+-# CONFIG_USB_R8A66597_HCD is not set
+-
+-#
+-# USB Device Class drivers
+-#
+-# CONFIG_USB_ACM is not set
+-# CONFIG_USB_PRINTER is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-
+-#
+-# may also be needed; see USB_STORAGE Help for more information
+-#
+-CONFIG_USB_STORAGE=y
+-# CONFIG_USB_STORAGE_DEBUG is not set
+-# CONFIG_USB_STORAGE_DATAFAB is not set
+-# CONFIG_USB_STORAGE_FREECOM is not set
+-# CONFIG_USB_STORAGE_ISD200 is not set
+-# CONFIG_USB_STORAGE_DPCM is not set
+-# CONFIG_USB_STORAGE_USBAT is not set
+-# CONFIG_USB_STORAGE_SDDR09 is not set
+-# CONFIG_USB_STORAGE_SDDR55 is not set
+-# CONFIG_USB_STORAGE_JUMPSHOT is not set
+-# CONFIG_USB_STORAGE_ALAUDA is not set
+-# CONFIG_USB_STORAGE_KARMA is not set
+-# CONFIG_USB_LIBUSUAL is not set
+-
+-#
+-# USB Imaging devices
+-#
+-# CONFIG_USB_MDC800 is not set
+-# CONFIG_USB_MICROTEK is not set
+-CONFIG_USB_MON=y
+-
+-#
+-# USB port drivers
+-#
+-# CONFIG_USB_SERIAL is not set
+-
+-#
+-# USB Miscellaneous drivers
+-#
+-# CONFIG_USB_EMI62 is not set
+-# CONFIG_USB_EMI26 is not set
+-# CONFIG_USB_ADUTUX is not set
+-# CONFIG_USB_AUERSWALD is not set
+-# CONFIG_USB_RIO500 is not set
+-# CONFIG_USB_LEGOTOWER is not set
+-# CONFIG_USB_LCD is not set
+-# CONFIG_USB_BERRY_CHARGE is not set
+-# CONFIG_USB_LED is not set
+-# CONFIG_USB_CYPRESS_CY7C63 is not set
+-# CONFIG_USB_CYTHERM is not set
+-# CONFIG_USB_PHIDGET is not set
+-# CONFIG_USB_IDMOUSE is not set
+-# CONFIG_USB_FTDI_ELAN is not set
+-# CONFIG_USB_APPLEDISPLAY is not set
+-# CONFIG_USB_SISUSBVGA is not set
+-# CONFIG_USB_LD is not set
+-# CONFIG_USB_TRANCEVIBRATOR is not set
+-# CONFIG_USB_IOWARRIOR is not set
+-# CONFIG_USB_TEST is not set
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_INFINIBAND is not set
+-# CONFIG_EDAC is not set
+-CONFIG_RTC_LIB=y
+-CONFIG_RTC_CLASS=y
+-CONFIG_RTC_HCTOSYS=y
+-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+-# CONFIG_RTC_DEBUG is not set
+-
+-#
+-# RTC interfaces
+-#
+-CONFIG_RTC_INTF_SYSFS=y
+-CONFIG_RTC_INTF_PROC=y
+-CONFIG_RTC_INTF_DEV=y
+-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+-# CONFIG_RTC_DRV_TEST is not set
+-
+-#
+-# I2C RTC drivers
+-#
+-# CONFIG_RTC_DRV_DS1307 is not set
+-# CONFIG_RTC_DRV_DS1374 is not set
+-# CONFIG_RTC_DRV_DS1672 is not set
+-# CONFIG_RTC_DRV_MAX6900 is not set
+-# CONFIG_RTC_DRV_RS5C372 is not set
+-# CONFIG_RTC_DRV_ISL1208 is not set
+-# CONFIG_RTC_DRV_X1205 is not set
+-# CONFIG_RTC_DRV_PCF8563 is not set
+-# CONFIG_RTC_DRV_PCF8583 is not set
+-# CONFIG_RTC_DRV_M41T80 is not set
+-# CONFIG_RTC_DRV_S35390A is not set
+-
+-#
+-# SPI RTC drivers
+-#
+-
+-#
+-# Platform RTC drivers
+-#
+-CONFIG_RTC_DRV_CMOS=y
+-# CONFIG_RTC_DRV_DS1511 is not set
+-# CONFIG_RTC_DRV_DS1553 is not set
+-# CONFIG_RTC_DRV_DS1742 is not set
+-# CONFIG_RTC_DRV_STK17TA8 is not set
+-# CONFIG_RTC_DRV_M48T86 is not set
+-# CONFIG_RTC_DRV_M48T59 is not set
+-# CONFIG_RTC_DRV_V3020 is not set
+-
+-#
+-# on-CPU RTC drivers
+-#
+-# CONFIG_DMADEVICES is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=y
+-CONFIG_EXT3_FS_XATTR=y
+-# CONFIG_EXT3_FS_POSIX_ACL is not set
+-# CONFIG_EXT3_FS_SECURITY is not set
+-# CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=y
+-CONFIG_FS_MBCACHE=y
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-CONFIG_ISO9660_FS=m
+-CONFIG_JOLIET=y
+-CONFIG_ZISOFS=y
+-CONFIG_UDF_FS=m
+-CONFIG_UDF_NLS=y
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-CONFIG_FAT_FS=y
+-CONFIG_MSDOS_FS=m
+-CONFIG_VFAT_FS=y
+-CONFIG_FAT_DEFAULT_CODEPAGE=437
+-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+-CONFIG_NTFS_FS=y
+-# CONFIG_NTFS_DEBUG is not set
+-# CONFIG_NTFS_RW is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-CONFIG_ADFS_FS=m
+-# CONFIG_ADFS_FS_RW is not set
+-CONFIG_AFFS_FS=m
+-CONFIG_HFS_FS=m
+-CONFIG_HFSPLUS_FS=m
+-CONFIG_BEFS_FS=m
+-# CONFIG_BEFS_DEBUG is not set
+-CONFIG_BFS_FS=m
+-CONFIG_EFS_FS=m
+-CONFIG_CRAMFS=y
+-CONFIG_VXFS_FS=m
+-# CONFIG_MINIX_FS is not set
+-CONFIG_HPFS_FS=m
+-CONFIG_QNX4FS_FS=m
+-# CONFIG_ROMFS_FS is not set
+-CONFIG_SYSV_FS=m
+-CONFIG_UFS_FS=m
+-# CONFIG_UFS_FS_WRITE is not set
+-# CONFIG_UFS_DEBUG is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-CONFIG_NFS_V3=y
+-# CONFIG_NFS_V3_ACL is not set
+-CONFIG_NFS_V4=y
+-# CONFIG_NFS_DIRECTIO is not set
+-CONFIG_NFSD=y
+-# CONFIG_NFSD_V3 is not set
+-CONFIG_NFSD_TCP=y
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_LOCKD_V4=y
+-CONFIG_EXPORTFS=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-CONFIG_SUNRPC_GSS=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-CONFIG_RPCSEC_GSS_KRB5=y
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-CONFIG_PARTITION_ADVANCED=y
+-# CONFIG_ACORN_PARTITION is not set
+-# CONFIG_OSF_PARTITION is not set
+-# CONFIG_AMIGA_PARTITION is not set
+-# CONFIG_ATARI_PARTITION is not set
+-CONFIG_MAC_PARTITION=y
+-CONFIG_MSDOS_PARTITION=y
+-# CONFIG_BSD_DISKLABEL is not set
+-# CONFIG_MINIX_SUBPARTITION is not set
+-# CONFIG_SOLARIS_X86_PARTITION is not set
+-# CONFIG_UNIXWARE_DISKLABEL is not set
+-# CONFIG_LDM_PARTITION is not set
+-# CONFIG_SGI_PARTITION is not set
+-# CONFIG_ULTRIX_PARTITION is not set
+-# CONFIG_SUN_PARTITION is not set
+-# CONFIG_KARMA_PARTITION is not set
+-# CONFIG_EFI_PARTITION is not set
+-# CONFIG_SYSV68_PARTITION is not set
+-CONFIG_NLS=y
+-CONFIG_NLS_DEFAULT="iso8859-1"
+-# CONFIG_NLS_CODEPAGE_437 is not set
+-# CONFIG_NLS_CODEPAGE_737 is not set
+-# CONFIG_NLS_CODEPAGE_775 is not set
+-# CONFIG_NLS_CODEPAGE_850 is not set
+-# CONFIG_NLS_CODEPAGE_852 is not set
+-# CONFIG_NLS_CODEPAGE_855 is not set
+-# CONFIG_NLS_CODEPAGE_857 is not set
+-# CONFIG_NLS_CODEPAGE_860 is not set
+-# CONFIG_NLS_CODEPAGE_861 is not set
+-# CONFIG_NLS_CODEPAGE_862 is not set
+-# CONFIG_NLS_CODEPAGE_863 is not set
+-# CONFIG_NLS_CODEPAGE_864 is not set
+-# CONFIG_NLS_CODEPAGE_865 is not set
+-# CONFIG_NLS_CODEPAGE_866 is not set
+-# CONFIG_NLS_CODEPAGE_869 is not set
+-# CONFIG_NLS_CODEPAGE_936 is not set
+-# CONFIG_NLS_CODEPAGE_950 is not set
+-# CONFIG_NLS_CODEPAGE_932 is not set
+-# CONFIG_NLS_CODEPAGE_949 is not set
+-# CONFIG_NLS_CODEPAGE_874 is not set
+-# CONFIG_NLS_ISO8859_8 is not set
+-# CONFIG_NLS_CODEPAGE_1250 is not set
+-# CONFIG_NLS_CODEPAGE_1251 is not set
+-# CONFIG_NLS_ASCII is not set
+-# CONFIG_NLS_ISO8859_1 is not set
+-# CONFIG_NLS_ISO8859_2 is not set
+-# CONFIG_NLS_ISO8859_3 is not set
+-# CONFIG_NLS_ISO8859_4 is not set
+-# CONFIG_NLS_ISO8859_5 is not set
+-# CONFIG_NLS_ISO8859_6 is not set
+-# CONFIG_NLS_ISO8859_7 is not set
+-# CONFIG_NLS_ISO8859_9 is not set
+-# CONFIG_NLS_ISO8859_13 is not set
+-# CONFIG_NLS_ISO8859_14 is not set
+-# CONFIG_NLS_ISO8859_15 is not set
+-# CONFIG_NLS_KOI8_R is not set
+-# CONFIG_NLS_KOI8_U is not set
+-CONFIG_NLS_UTF8=m
+-# CONFIG_DLM is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-CONFIG_LIBCRC32C=m
+-CONFIG_ZLIB_INFLATE=y
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-# CONFIG_MAGIC_SYSRQ is not set
+-# CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
+-# CONFIG_HEADERS_CHECK is not set
+-CONFIG_DEBUG_KERNEL=y
+-# CONFIG_DEBUG_SHIRQ is not set
+-CONFIG_DETECT_SOFTLOCKUP=y
+-CONFIG_SCHED_DEBUG=y
+-# CONFIG_SCHEDSTATS is not set
+-# CONFIG_TIMER_STATS is not set
+-# CONFIG_SLUB_DEBUG_ON is not set
+-# CONFIG_SLUB_STATS is not set
+-# CONFIG_DEBUG_RT_MUTEXES is not set
+-# CONFIG_RT_MUTEX_TESTER is not set
+-# CONFIG_DEBUG_SPINLOCK is not set
+-# CONFIG_DEBUG_MUTEXES is not set
+-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+-# CONFIG_DEBUG_KOBJECT is not set
+-# CONFIG_DEBUG_HIGHMEM is not set
+-# CONFIG_DEBUG_BUGVERBOSE is not set
+-CONFIG_DEBUG_INFO=y
+-# CONFIG_DEBUG_VM is not set
+-# CONFIG_DEBUG_LIST is not set
+-# CONFIG_DEBUG_SG is not set
+-# CONFIG_BOOT_PRINTK_DELAY is not set
+-# CONFIG_RCU_TORTURE_TEST is not set
+-# CONFIG_BACKTRACE_SELF_TEST is not set
+-# CONFIG_FAULT_INJECTION is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_DEBUG_STACKOVERFLOW is not set
+-# CONFIG_DEBUG_STACK_USAGE is not set
+-# CONFIG_DEBUG_PAGEALLOC is not set
+-# CONFIG_DEBUGGER is not set
+-# CONFIG_BDI_SWITCH is not set
+-# CONFIG_PPC_EARLY_DEBUG is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_BLKCIPHER=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-CONFIG_CRYPTO_HASH=y
+-CONFIG_CRYPTO_MANAGER=y
+-CONFIG_CRYPTO_HMAC=y
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-CONFIG_CRYPTO_MD5=y
+-CONFIG_CRYPTO_SHA1=m
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-# CONFIG_CRYPTO_ECB is not set
+-CONFIG_CRYPTO_CBC=y
+-CONFIG_CRYPTO_PCBC=m
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-CONFIG_CRYPTO_DES=y
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_TEST is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+-# CONFIG_PPC_CLOCK is not set
+--- a/arch/powerpc/configs/mpc8560_ads_defconfig
++++ /dev/null
+@@ -1,885 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc6
+-# Mon Mar 24 08:48:27 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-# CONFIG_6xx is not set
+-CONFIG_PPC_85xx=y
+-# CONFIG_PPC_8xx is not set
+-# CONFIG_40x is not set
+-# CONFIG_44x is not set
+-# CONFIG_E200 is not set
+-CONFIG_E500=y
+-CONFIG_BOOKE=y
+-CONFIG_FSL_BOOKE=y
+-CONFIG_FSL_EMB_PERFMON=y
+-# CONFIG_PHYS_64BIT is not set
+-CONFIG_SPE=y
+-# CONFIG_PPC_MM_SLICES is not set
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-CONFIG_DEFAULT_UIMAGE=y
+-# CONFIG_PPC_DCR_NATIVE is not set
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-# CONFIG_POSIX_MQUEUE is not set
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-# CONFIG_FAIR_GROUP_SCHED is not set
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-CONFIG_SYSFS_DEPRECATED_V2=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-CONFIG_KALLSYMS=y
+-# CONFIG_KALLSYMS_ALL is not set
+-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-CONFIG_EPOLL=y
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLUB_DEBUG=y
+-# CONFIG_SLAB is not set
+-CONFIG_SLUB=y
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_HAVE_KRETPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-# CONFIG_MODULES is not set
+-CONFIG_BLOCK=y
+-# CONFIG_LBD is not set
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-CONFIG_MPC85xx=y
+-# CONFIG_MPC8540_ADS is not set
+-CONFIG_MPC8560_ADS=y
+-# CONFIG_MPC85xx_CDS is not set
+-# CONFIG_MPC85xx_MDS is not set
+-# CONFIG_MPC85xx_DS is not set
+-# CONFIG_STX_GP3 is not set
+-# CONFIG_TQM8540 is not set
+-# CONFIG_TQM8541 is not set
+-# CONFIG_TQM8555 is not set
+-# CONFIG_TQM8560 is not set
+-# CONFIG_SBC8548 is not set
+-# CONFIG_SBC8560 is not set
+-# CONFIG_IPIC is not set
+-CONFIG_MPIC=y
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-CONFIG_CPM2=y
+-CONFIG_PPC_CPM_NEW_BINDING=y
+-# CONFIG_FSL_ULI1575 is not set
+-CONFIG_CPM=y
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-# CONFIG_TICK_ONESHOT is not set
+-# CONFIG_NO_HZ is not set
+-# CONFIG_HIGH_RES_TIMERS is not set
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_BINFMT_ELF=y
+-CONFIG_BINFMT_MISC=y
+-CONFIG_MATH_EMULATION=y
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_RESOURCES_64BIT is not set
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-# CONFIG_PROC_DEVICETREE is not set
+-# CONFIG_CMDLINE_BOOL is not set
+-# CONFIG_PM is not set
+-# CONFIG_SECCOMP is not set
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_FSL_SOC=y
+-CONFIG_FSL_PCI=y
+-CONFIG_PCI=y
+-CONFIG_PCI_DOMAINS=y
+-CONFIG_PCI_SYSCALL=y
+-# CONFIG_PCIEPORTBUS is not set
+-CONFIG_ARCH_SUPPORTS_MSI=y
+-# CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
+-CONFIG_PCI_DEBUG=y
+-# CONFIG_PCCARD is not set
+-# CONFIG_HOTPLUG_PCI is not set
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_BOOT_LOAD=0x00800000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-CONFIG_XFRM=y
+-# CONFIG_XFRM_USER is not set
+-# CONFIG_XFRM_SUB_POLICY is not set
+-# CONFIG_XFRM_MIGRATE is not set
+-# CONFIG_XFRM_STATISTICS is not set
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-CONFIG_IP_MULTICAST=y
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_IP_MROUTE is not set
+-# CONFIG_ARPD is not set
+-CONFIG_SYN_COOKIES=y
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-CONFIG_INET_XFRM_MODE_TRANSPORT=y
+-CONFIG_INET_XFRM_MODE_TUNNEL=y
+-CONFIG_INET_XFRM_MODE_BEET=y
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-# CONFIG_FW_LOADER is not set
+-# CONFIG_DEBUG_DRIVER is not set
+-# CONFIG_DEBUG_DEVRES is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-# CONFIG_CONNECTOR is not set
+-# CONFIG_MTD is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_CPQ_DA is not set
+-# CONFIG_BLK_CPQ_CISS_DA is not set
+-# CONFIG_BLK_DEV_DAC960 is not set
+-# CONFIG_BLK_DEV_UMEM is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-CONFIG_BLK_DEV_LOOP=y
+-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-# CONFIG_BLK_DEV_SX8 is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=32768
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_PHANTOM is not set
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_SGI_IOC4 is not set
+-# CONFIG_TIFM_CORE is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-# CONFIG_IDE is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-# CONFIG_SCSI is not set
+-# CONFIG_SCSI_DMA is not set
+-# CONFIG_SCSI_NETLINK is not set
+-# CONFIG_ATA is not set
+-# CONFIG_MD is not set
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-# CONFIG_FIREWIRE is not set
+-# CONFIG_IEEE1394 is not set
+-# CONFIG_I2O is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_ARCNET is not set
+-CONFIG_PHYLIB=y
+-
+-#
+-# MII PHY device drivers
+-#
+-CONFIG_MARVELL_PHY=y
+-CONFIG_DAVICOM_PHY=y
+-# CONFIG_QSEMI_PHY is not set
+-# CONFIG_LXT_PHY is not set
+-# CONFIG_CICADA_PHY is not set
+-# CONFIG_VITESSE_PHY is not set
+-# CONFIG_SMSC_PHY is not set
+-# CONFIG_BROADCOM_PHY is not set
+-# CONFIG_ICPLUS_PHY is not set
+-# CONFIG_REALTEK_PHY is not set
+-# CONFIG_FIXED_PHY is not set
+-# CONFIG_MDIO_BITBANG is not set
+-CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
+-# CONFIG_HAPPYMEAL is not set
+-# CONFIG_SUNGEM is not set
+-# CONFIG_CASSINI is not set
+-# CONFIG_NET_VENDOR_3COM is not set
+-# CONFIG_NET_TULIP is not set
+-# CONFIG_HP100 is not set
+-# CONFIG_IBM_NEW_EMAC_ZMII is not set
+-# CONFIG_IBM_NEW_EMAC_RGMII is not set
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-# CONFIG_NET_PCI is not set
+-# CONFIG_B44 is not set
+-CONFIG_FS_ENET=y
+-# CONFIG_FS_ENET_HAS_SCC is not set
+-CONFIG_FS_ENET_HAS_FCC=y
+-# CONFIG_FS_ENET_MDIO_FCC is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_ACENIC is not set
+-# CONFIG_DL2K is not set
+-CONFIG_E1000=y
+-CONFIG_E1000_NAPI=y
+-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+-# CONFIG_E1000E is not set
+-# CONFIG_E1000E_ENABLED is not set
+-# CONFIG_IP1000 is not set
+-# CONFIG_IGB is not set
+-# CONFIG_NS83820 is not set
+-# CONFIG_HAMACHI is not set
+-# CONFIG_YELLOWFIN is not set
+-# CONFIG_R8169 is not set
+-# CONFIG_SIS190 is not set
+-# CONFIG_SKGE is not set
+-# CONFIG_SKY2 is not set
+-# CONFIG_SK98LIN is not set
+-# CONFIG_VIA_VELOCITY is not set
+-# CONFIG_TIGON3 is not set
+-# CONFIG_BNX2 is not set
+-CONFIG_GIANFAR=y
+-CONFIG_GFAR_NAPI=y
+-# CONFIG_QLA3XXX is not set
+-# CONFIG_ATL1 is not set
+-CONFIG_NETDEV_10000=y
+-# CONFIG_CHELSIO_T1 is not set
+-# CONFIG_CHELSIO_T3 is not set
+-# CONFIG_IXGBE is not set
+-# CONFIG_IXGB is not set
+-# CONFIG_S2IO is not set
+-# CONFIG_MYRI10GE is not set
+-# CONFIG_NETXEN_NIC is not set
+-# CONFIG_NIU is not set
+-# CONFIG_MLX4_CORE is not set
+-# CONFIG_TEHUTI is not set
+-# CONFIG_BNX2X is not set
+-# CONFIG_TR is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-# CONFIG_WAN is not set
+-# CONFIG_FDDI is not set
+-# CONFIG_HIPPI is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-CONFIG_INPUT=y
+-# CONFIG_INPUT_FF_MEMLESS is not set
+-# CONFIG_INPUT_POLLDEV is not set
+-
+-#
+-# Userland interfaces
+-#
+-# CONFIG_INPUT_MOUSEDEV is not set
+-# CONFIG_INPUT_JOYDEV is not set
+-# CONFIG_INPUT_EVDEV is not set
+-# CONFIG_INPUT_EVBUG is not set
+-
+-#
+-# Input Device Drivers
+-#
+-# CONFIG_INPUT_KEYBOARD is not set
+-# CONFIG_INPUT_MOUSE is not set
+-# CONFIG_INPUT_JOYSTICK is not set
+-# CONFIG_INPUT_TABLET is not set
+-# CONFIG_INPUT_TOUCHSCREEN is not set
+-# CONFIG_INPUT_MISC is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-# CONFIG_NOZOMI is not set
+-
+-#
+-# Serial drivers
+-#
+-# CONFIG_SERIAL_8250 is not set
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-CONFIG_SERIAL_CPM=y
+-CONFIG_SERIAL_CPM_CONSOLE=y
+-CONFIG_SERIAL_CPM_SCC1=y
+-CONFIG_SERIAL_CPM_SCC2=y
+-# CONFIG_SERIAL_CPM_SCC3 is not set
+-# CONFIG_SERIAL_CPM_SCC4 is not set
+-# CONFIG_SERIAL_CPM_SMC1 is not set
+-# CONFIG_SERIAL_CPM_SMC2 is not set
+-# CONFIG_SERIAL_JSM is not set
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-CONFIG_HW_RANDOM=y
+-# CONFIG_NVRAM is not set
+-CONFIG_GEN_RTC=y
+-# CONFIG_GEN_RTC_X is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_APPLICOM is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_DEVPORT=y
+-# CONFIG_I2C is not set
+-
+-#
+-# SPI support
+-#
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-CONFIG_HWMON=y
+-# CONFIG_HWMON_VID is not set
+-# CONFIG_SENSORS_I5K_AMB is not set
+-# CONFIG_SENSORS_F71805F is not set
+-# CONFIG_SENSORS_F71882FG is not set
+-# CONFIG_SENSORS_IT87 is not set
+-# CONFIG_SENSORS_PC87360 is not set
+-# CONFIG_SENSORS_PC87427 is not set
+-# CONFIG_SENSORS_SIS5595 is not set
+-# CONFIG_SENSORS_SMSC47M1 is not set
+-# CONFIG_SENSORS_SMSC47B397 is not set
+-# CONFIG_SENSORS_VIA686A is not set
+-# CONFIG_SENSORS_VT1211 is not set
+-# CONFIG_SENSORS_VT8231 is not set
+-# CONFIG_SENSORS_W83627HF is not set
+-# CONFIG_SENSORS_W83627EHF is not set
+-# CONFIG_HWMON_DEBUG_CHIP is not set
+-# CONFIG_THERMAL is not set
+-# CONFIG_WATCHDOG is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-CONFIG_DAB=y
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_AGP is not set
+-# CONFIG_DRM is not set
+-# CONFIG_VGASTATE is not set
+-CONFIG_VIDEO_OUTPUT_CONTROL=y
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-CONFIG_HID_SUPPORT=y
+-CONFIG_HID=y
+-# CONFIG_HID_DEBUG is not set
+-# CONFIG_HIDRAW is not set
+-CONFIG_USB_SUPPORT=y
+-CONFIG_USB_ARCH_HAS_HCD=y
+-CONFIG_USB_ARCH_HAS_OHCI=y
+-CONFIG_USB_ARCH_HAS_EHCI=y
+-# CONFIG_USB is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_INFINIBAND is not set
+-# CONFIG_EDAC is not set
+-# CONFIG_RTC_CLASS is not set
+-# CONFIG_DMADEVICES is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=y
+-CONFIG_EXT3_FS_XATTR=y
+-# CONFIG_EXT3_FS_POSIX_ACL is not set
+-# CONFIG_EXT3_FS_SECURITY is not set
+-# CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=y
+-CONFIG_FS_MBCACHE=y
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-# CONFIG_MSDOS_FS is not set
+-# CONFIG_VFAT_FS is not set
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-# CONFIG_CRAMFS is not set
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-# CONFIG_NFS_V3 is not set
+-# CONFIG_NFS_V4 is not set
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-# CONFIG_RPCSEC_GSS_KRB5 is not set
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-CONFIG_PARTITION_ADVANCED=y
+-# CONFIG_ACORN_PARTITION is not set
+-# CONFIG_OSF_PARTITION is not set
+-# CONFIG_AMIGA_PARTITION is not set
+-# CONFIG_ATARI_PARTITION is not set
+-# CONFIG_MAC_PARTITION is not set
+-# CONFIG_MSDOS_PARTITION is not set
+-# CONFIG_LDM_PARTITION is not set
+-# CONFIG_SGI_PARTITION is not set
+-# CONFIG_ULTRIX_PARTITION is not set
+-# CONFIG_SUN_PARTITION is not set
+-# CONFIG_KARMA_PARTITION is not set
+-# CONFIG_EFI_PARTITION is not set
+-# CONFIG_SYSV68_PARTITION is not set
+-# CONFIG_NLS is not set
+-# CONFIG_DLM is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-# CONFIG_MAGIC_SYSRQ is not set
+-# CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
+-# CONFIG_HEADERS_CHECK is not set
+-CONFIG_DEBUG_KERNEL=y
+-# CONFIG_DEBUG_SHIRQ is not set
+-CONFIG_DETECT_SOFTLOCKUP=y
+-CONFIG_SCHED_DEBUG=y
+-# CONFIG_SCHEDSTATS is not set
+-# CONFIG_TIMER_STATS is not set
+-# CONFIG_SLUB_DEBUG_ON is not set
+-# CONFIG_SLUB_STATS is not set
+-# CONFIG_DEBUG_RT_MUTEXES is not set
+-# CONFIG_RT_MUTEX_TESTER is not set
+-# CONFIG_DEBUG_SPINLOCK is not set
+-CONFIG_DEBUG_MUTEXES=y
+-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+-# CONFIG_DEBUG_KOBJECT is not set
+-# CONFIG_DEBUG_BUGVERBOSE is not set
+-# CONFIG_DEBUG_INFO is not set
+-# CONFIG_DEBUG_VM is not set
+-# CONFIG_DEBUG_LIST is not set
+-# CONFIG_DEBUG_SG is not set
+-# CONFIG_BOOT_PRINTK_DELAY is not set
+-# CONFIG_BACKTRACE_SELF_TEST is not set
+-# CONFIG_FAULT_INJECTION is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_DEBUG_STACKOVERFLOW is not set
+-# CONFIG_DEBUG_STACK_USAGE is not set
+-# CONFIG_DEBUG_PAGEALLOC is not set
+-# CONFIG_DEBUGGER is not set
+-# CONFIG_KGDB_CONSOLE is not set
+-# CONFIG_BDI_SWITCH is not set
+-# CONFIG_PPC_EARLY_DEBUG is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-# CONFIG_CRYPTO_MANAGER is not set
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-# CONFIG_CRYPTO_MD5 is not set
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-# CONFIG_CRYPTO_ECB is not set
+-# CONFIG_CRYPTO_CBC is not set
+-# CONFIG_CRYPTO_PCBC is not set
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-# CONFIG_CRYPTO_DES is not set
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+-# CONFIG_PPC_CLOCK is not set
+-CONFIG_PPC_LIB_RHEAP=y
+--- a/arch/powerpc/configs/mpc8568mds_defconfig
++++ /dev/null
+@@ -1,1117 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc7
+-# Mon Mar 31 11:37:05 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-# CONFIG_6xx is not set
+-CONFIG_PPC_85xx=y
+-# CONFIG_PPC_8xx is not set
+-# CONFIG_40x is not set
+-# CONFIG_44x is not set
+-# CONFIG_E200 is not set
+-CONFIG_E500=y
+-CONFIG_BOOKE=y
+-CONFIG_FSL_BOOKE=y
+-CONFIG_FSL_EMB_PERFMON=y
+-# CONFIG_PHYS_64BIT is not set
+-CONFIG_SPE=y
+-# CONFIG_PPC_MM_SLICES is not set
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-CONFIG_DEFAULT_UIMAGE=y
+-# CONFIG_PPC_DCR_NATIVE is not set
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-# CONFIG_POSIX_MQUEUE is not set
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-# CONFIG_FAIR_GROUP_SCHED is not set
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-CONFIG_SYSFS_DEPRECATED_V2=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-# CONFIG_KALLSYMS is not set
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-# CONFIG_EPOLL is not set
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLUB_DEBUG=y
+-# CONFIG_SLAB is not set
+-CONFIG_SLUB=y
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_HAVE_KRETPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-CONFIG_MODULES=y
+-CONFIG_MODULE_UNLOAD=y
+-# CONFIG_MODULE_FORCE_UNLOAD is not set
+-# CONFIG_MODVERSIONS is not set
+-# CONFIG_MODULE_SRCVERSION_ALL is not set
+-# CONFIG_KMOD is not set
+-CONFIG_BLOCK=y
+-# CONFIG_LBD is not set
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-CONFIG_MPC85xx=y
+-# CONFIG_MPC8540_ADS is not set
+-# CONFIG_MPC8560_ADS is not set
+-# CONFIG_MPC85xx_CDS is not set
+-CONFIG_MPC85xx_MDS=y
+-# CONFIG_MPC85xx_DS is not set
+-# CONFIG_STX_GP3 is not set
+-# CONFIG_TQM8540 is not set
+-# CONFIG_TQM8541 is not set
+-# CONFIG_TQM8555 is not set
+-# CONFIG_TQM8560 is not set
+-# CONFIG_SBC8548 is not set
+-# CONFIG_SBC8560 is not set
+-# CONFIG_IPIC is not set
+-CONFIG_MPIC=y
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-CONFIG_QUICC_ENGINE=y
+-# CONFIG_CPM2 is not set
+-# CONFIG_FSL_ULI1575 is not set
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-CONFIG_TICK_ONESHOT=y
+-CONFIG_NO_HZ=y
+-CONFIG_HIGH_RES_TIMERS=y
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_BINFMT_ELF=y
+-# CONFIG_BINFMT_MISC is not set
+-CONFIG_MATH_EMULATION=y
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_RESOURCES_64BIT is not set
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-CONFIG_PROC_DEVICETREE=y
+-# CONFIG_CMDLINE_BOOL is not set
+-# CONFIG_PM is not set
+-CONFIG_SECCOMP=y
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_FSL_SOC=y
+-CONFIG_FSL_PCI=y
+-CONFIG_PCI=y
+-CONFIG_PCI_DOMAINS=y
+-CONFIG_PCI_SYSCALL=y
+-# CONFIG_PCIEPORTBUS is not set
+-CONFIG_ARCH_SUPPORTS_MSI=y
+-# CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
+-# CONFIG_PCI_DEBUG is not set
+-# CONFIG_PCCARD is not set
+-# CONFIG_HOTPLUG_PCI is not set
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_BOOT_LOAD=0x00800000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-CONFIG_XFRM=y
+-# CONFIG_XFRM_USER is not set
+-# CONFIG_XFRM_SUB_POLICY is not set
+-# CONFIG_XFRM_MIGRATE is not set
+-# CONFIG_XFRM_STATISTICS is not set
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-CONFIG_IP_MULTICAST=y
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_IP_MROUTE is not set
+-# CONFIG_ARPD is not set
+-CONFIG_SYN_COOKIES=y
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-CONFIG_INET_XFRM_MODE_TRANSPORT=y
+-CONFIG_INET_XFRM_MODE_TUNNEL=y
+-CONFIG_INET_XFRM_MODE_BEET=y
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-# CONFIG_FW_LOADER is not set
+-# CONFIG_DEBUG_DRIVER is not set
+-# CONFIG_DEBUG_DEVRES is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-# CONFIG_CONNECTOR is not set
+-# CONFIG_MTD is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_CPQ_DA is not set
+-# CONFIG_BLK_CPQ_CISS_DA is not set
+-# CONFIG_BLK_DEV_DAC960 is not set
+-# CONFIG_BLK_DEV_UMEM is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-CONFIG_BLK_DEV_LOOP=y
+-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-# CONFIG_BLK_DEV_SX8 is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=32768
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_PHANTOM is not set
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_SGI_IOC4 is not set
+-# CONFIG_TIFM_CORE is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-# CONFIG_IDE is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-CONFIG_SCSI=y
+-CONFIG_SCSI_DMA=y
+-# CONFIG_SCSI_TGT is not set
+-# CONFIG_SCSI_NETLINK is not set
+-CONFIG_SCSI_PROC_FS=y
+-
+-#
+-# SCSI support type (disk, tape, CD-ROM)
+-#
+-# CONFIG_BLK_DEV_SD is not set
+-# CONFIG_CHR_DEV_ST is not set
+-# CONFIG_CHR_DEV_OSST is not set
+-# CONFIG_BLK_DEV_SR is not set
+-# CONFIG_CHR_DEV_SG is not set
+-# CONFIG_CHR_DEV_SCH is not set
+-
+-#
+-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+-#
+-# CONFIG_SCSI_MULTI_LUN is not set
+-# CONFIG_SCSI_CONSTANTS is not set
+-# CONFIG_SCSI_LOGGING is not set
+-# CONFIG_SCSI_SCAN_ASYNC is not set
+-CONFIG_SCSI_WAIT_SCAN=m
+-
+-#
+-# SCSI Transports
+-#
+-# CONFIG_SCSI_SPI_ATTRS is not set
+-# CONFIG_SCSI_FC_ATTRS is not set
+-# CONFIG_SCSI_ISCSI_ATTRS is not set
+-# CONFIG_SCSI_SAS_LIBSAS is not set
+-# CONFIG_SCSI_SRP_ATTRS is not set
+-CONFIG_SCSI_LOWLEVEL=y
+-# CONFIG_ISCSI_TCP is not set
+-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+-# CONFIG_SCSI_3W_9XXX is not set
+-# CONFIG_SCSI_ACARD is not set
+-# CONFIG_SCSI_AACRAID is not set
+-# CONFIG_SCSI_AIC7XXX is not set
+-# CONFIG_SCSI_AIC7XXX_OLD is not set
+-# CONFIG_SCSI_AIC79XX is not set
+-# CONFIG_SCSI_AIC94XX is not set
+-# CONFIG_SCSI_DPT_I2O is not set
+-# CONFIG_SCSI_ADVANSYS is not set
+-# CONFIG_SCSI_ARCMSR is not set
+-# CONFIG_MEGARAID_NEWGEN is not set
+-# CONFIG_MEGARAID_LEGACY is not set
+-# CONFIG_MEGARAID_SAS is not set
+-# CONFIG_SCSI_HPTIOP is not set
+-# CONFIG_SCSI_BUSLOGIC is not set
+-# CONFIG_SCSI_DMX3191D is not set
+-# CONFIG_SCSI_EATA is not set
+-# CONFIG_SCSI_FUTURE_DOMAIN is not set
+-# CONFIG_SCSI_GDTH is not set
+-# CONFIG_SCSI_IPS is not set
+-# CONFIG_SCSI_INITIO is not set
+-# CONFIG_SCSI_INIA100 is not set
+-# CONFIG_SCSI_MVSAS is not set
+-# CONFIG_SCSI_STEX is not set
+-# CONFIG_SCSI_SYM53C8XX_2 is not set
+-# CONFIG_SCSI_QLOGIC_1280 is not set
+-# CONFIG_SCSI_QLA_FC is not set
+-# CONFIG_SCSI_QLA_ISCSI is not set
+-# CONFIG_SCSI_LPFC is not set
+-# CONFIG_SCSI_DC395x is not set
+-# CONFIG_SCSI_DC390T is not set
+-# CONFIG_SCSI_NSP32 is not set
+-# CONFIG_SCSI_DEBUG is not set
+-# CONFIG_SCSI_SRP is not set
+-# CONFIG_ATA is not set
+-# CONFIG_MD is not set
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-# CONFIG_FIREWIRE is not set
+-# CONFIG_IEEE1394 is not set
+-# CONFIG_I2O is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_ARCNET is not set
+-CONFIG_PHYLIB=y
+-
+-#
+-# MII PHY device drivers
+-#
+-CONFIG_MARVELL_PHY=y
+-# CONFIG_DAVICOM_PHY is not set
+-# CONFIG_QSEMI_PHY is not set
+-# CONFIG_LXT_PHY is not set
+-# CONFIG_CICADA_PHY is not set
+-# CONFIG_VITESSE_PHY is not set
+-# CONFIG_SMSC_PHY is not set
+-# CONFIG_BROADCOM_PHY is not set
+-# CONFIG_ICPLUS_PHY is not set
+-# CONFIG_REALTEK_PHY is not set
+-# CONFIG_FIXED_PHY is not set
+-# CONFIG_MDIO_BITBANG is not set
+-CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
+-# CONFIG_HAPPYMEAL is not set
+-# CONFIG_SUNGEM is not set
+-# CONFIG_CASSINI is not set
+-# CONFIG_NET_VENDOR_3COM is not set
+-# CONFIG_NET_TULIP is not set
+-# CONFIG_HP100 is not set
+-# CONFIG_IBM_NEW_EMAC_ZMII is not set
+-# CONFIG_IBM_NEW_EMAC_RGMII is not set
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-# CONFIG_NET_PCI is not set
+-# CONFIG_B44 is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_ACENIC is not set
+-# CONFIG_DL2K is not set
+-# CONFIG_E1000 is not set
+-# CONFIG_E1000E is not set
+-# CONFIG_E1000E_ENABLED is not set
+-# CONFIG_IP1000 is not set
+-# CONFIG_IGB is not set
+-# CONFIG_NS83820 is not set
+-# CONFIG_HAMACHI is not set
+-# CONFIG_YELLOWFIN is not set
+-# CONFIG_R8169 is not set
+-# CONFIG_SIS190 is not set
+-# CONFIG_SKGE is not set
+-# CONFIG_SKY2 is not set
+-# CONFIG_SK98LIN is not set
+-# CONFIG_VIA_VELOCITY is not set
+-# CONFIG_TIGON3 is not set
+-# CONFIG_BNX2 is not set
+-CONFIG_GIANFAR=y
+-CONFIG_GFAR_NAPI=y
+-# CONFIG_UCC_GETH is not set
+-# CONFIG_QLA3XXX is not set
+-# CONFIG_ATL1 is not set
+-CONFIG_NETDEV_10000=y
+-# CONFIG_CHELSIO_T1 is not set
+-# CONFIG_CHELSIO_T3 is not set
+-# CONFIG_IXGBE is not set
+-# CONFIG_IXGB is not set
+-# CONFIG_S2IO is not set
+-# CONFIG_MYRI10GE is not set
+-# CONFIG_NETXEN_NIC is not set
+-# CONFIG_NIU is not set
+-# CONFIG_MLX4_CORE is not set
+-# CONFIG_TEHUTI is not set
+-# CONFIG_BNX2X is not set
+-# CONFIG_TR is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-# CONFIG_WAN is not set
+-# CONFIG_FDDI is not set
+-# CONFIG_HIPPI is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NET_FC is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-CONFIG_INPUT=y
+-# CONFIG_INPUT_FF_MEMLESS is not set
+-# CONFIG_INPUT_POLLDEV is not set
+-
+-#
+-# Userland interfaces
+-#
+-# CONFIG_INPUT_MOUSEDEV is not set
+-# CONFIG_INPUT_JOYDEV is not set
+-# CONFIG_INPUT_EVDEV is not set
+-# CONFIG_INPUT_EVBUG is not set
+-
+-#
+-# Input Device Drivers
+-#
+-# CONFIG_INPUT_KEYBOARD is not set
+-# CONFIG_INPUT_MOUSE is not set
+-# CONFIG_INPUT_JOYSTICK is not set
+-# CONFIG_INPUT_TABLET is not set
+-# CONFIG_INPUT_TOUCHSCREEN is not set
+-# CONFIG_INPUT_MISC is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-# CONFIG_NOZOMI is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-CONFIG_SERIAL_8250_PCI=y
+-CONFIG_SERIAL_8250_NR_UARTS=4
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-# CONFIG_SERIAL_8250_EXTENDED is not set
+-CONFIG_SERIAL_8250_SHARE_IRQ=y
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_JSM is not set
+-# CONFIG_SERIAL_OF_PLATFORM is not set
+-# CONFIG_SERIAL_QE is not set
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-CONFIG_HW_RANDOM=y
+-# CONFIG_NVRAM is not set
+-# CONFIG_GEN_RTC is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_APPLICOM is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_DEVPORT=y
+-CONFIG_I2C=y
+-CONFIG_I2C_BOARDINFO=y
+-CONFIG_I2C_CHARDEV=y
+-
+-#
+-# I2C Algorithms
+-#
+-# CONFIG_I2C_ALGOBIT is not set
+-# CONFIG_I2C_ALGOPCF is not set
+-# CONFIG_I2C_ALGOPCA is not set
+-
+-#
+-# I2C Hardware Bus support
+-#
+-# CONFIG_I2C_ALI1535 is not set
+-# CONFIG_I2C_ALI1563 is not set
+-# CONFIG_I2C_ALI15X3 is not set
+-# CONFIG_I2C_AMD756 is not set
+-# CONFIG_I2C_AMD8111 is not set
+-# CONFIG_I2C_I801 is not set
+-# CONFIG_I2C_I810 is not set
+-# CONFIG_I2C_PIIX4 is not set
+-CONFIG_I2C_MPC=y
+-# CONFIG_I2C_NFORCE2 is not set
+-# CONFIG_I2C_OCORES is not set
+-# CONFIG_I2C_PARPORT_LIGHT is not set
+-# CONFIG_I2C_PROSAVAGE is not set
+-# CONFIG_I2C_SAVAGE4 is not set
+-# CONFIG_I2C_SIMTEC is not set
+-# CONFIG_I2C_SIS5595 is not set
+-# CONFIG_I2C_SIS630 is not set
+-# CONFIG_I2C_SIS96X is not set
+-# CONFIG_I2C_TAOS_EVM is not set
+-# CONFIG_I2C_STUB is not set
+-# CONFIG_I2C_VIA is not set
+-# CONFIG_I2C_VIAPRO is not set
+-# CONFIG_I2C_VOODOO3 is not set
+-
+-#
+-# Miscellaneous I2C Chip support
+-#
+-# CONFIG_DS1682 is not set
+-# CONFIG_SENSORS_EEPROM is not set
+-# CONFIG_SENSORS_PCF8574 is not set
+-# CONFIG_PCF8575 is not set
+-# CONFIG_SENSORS_PCF8591 is not set
+-# CONFIG_TPS65010 is not set
+-# CONFIG_SENSORS_MAX6875 is not set
+-# CONFIG_SENSORS_TSL2550 is not set
+-# CONFIG_I2C_DEBUG_CORE is not set
+-# CONFIG_I2C_DEBUG_ALGO is not set
+-# CONFIG_I2C_DEBUG_BUS is not set
+-# CONFIG_I2C_DEBUG_CHIP is not set
+-
+-#
+-# SPI support
+-#
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-CONFIG_HWMON=y
+-# CONFIG_HWMON_VID is not set
+-# CONFIG_SENSORS_AD7418 is not set
+-# CONFIG_SENSORS_ADM1021 is not set
+-# CONFIG_SENSORS_ADM1025 is not set
+-# CONFIG_SENSORS_ADM1026 is not set
+-# CONFIG_SENSORS_ADM1029 is not set
+-# CONFIG_SENSORS_ADM1031 is not set
+-# CONFIG_SENSORS_ADM9240 is not set
+-# CONFIG_SENSORS_ADT7470 is not set
+-# CONFIG_SENSORS_ADT7473 is not set
+-# CONFIG_SENSORS_ATXP1 is not set
+-# CONFIG_SENSORS_DS1621 is not set
+-# CONFIG_SENSORS_I5K_AMB is not set
+-# CONFIG_SENSORS_F71805F is not set
+-# CONFIG_SENSORS_F71882FG is not set
+-# CONFIG_SENSORS_F75375S is not set
+-# CONFIG_SENSORS_GL518SM is not set
+-# CONFIG_SENSORS_GL520SM is not set
+-# CONFIG_SENSORS_IT87 is not set
+-# CONFIG_SENSORS_LM63 is not set
+-# CONFIG_SENSORS_LM75 is not set
+-# CONFIG_SENSORS_LM77 is not set
+-# CONFIG_SENSORS_LM78 is not set
+-# CONFIG_SENSORS_LM80 is not set
+-# CONFIG_SENSORS_LM83 is not set
+-# CONFIG_SENSORS_LM85 is not set
+-# CONFIG_SENSORS_LM87 is not set
+-# CONFIG_SENSORS_LM90 is not set
+-# CONFIG_SENSORS_LM92 is not set
+-# CONFIG_SENSORS_LM93 is not set
+-# CONFIG_SENSORS_MAX1619 is not set
+-# CONFIG_SENSORS_MAX6650 is not set
+-# CONFIG_SENSORS_PC87360 is not set
+-# CONFIG_SENSORS_PC87427 is not set
+-# CONFIG_SENSORS_SIS5595 is not set
+-# CONFIG_SENSORS_DME1737 is not set
+-# CONFIG_SENSORS_SMSC47M1 is not set
+-# CONFIG_SENSORS_SMSC47M192 is not set
+-# CONFIG_SENSORS_SMSC47B397 is not set
+-# CONFIG_SENSORS_ADS7828 is not set
+-# CONFIG_SENSORS_THMC50 is not set
+-# CONFIG_SENSORS_VIA686A is not set
+-# CONFIG_SENSORS_VT1211 is not set
+-# CONFIG_SENSORS_VT8231 is not set
+-# CONFIG_SENSORS_W83781D is not set
+-# CONFIG_SENSORS_W83791D is not set
+-# CONFIG_SENSORS_W83792D is not set
+-# CONFIG_SENSORS_W83793 is not set
+-# CONFIG_SENSORS_W83L785TS is not set
+-# CONFIG_SENSORS_W83L786NG is not set
+-# CONFIG_SENSORS_W83627HF is not set
+-# CONFIG_SENSORS_W83627EHF is not set
+-# CONFIG_HWMON_DEBUG_CHIP is not set
+-# CONFIG_THERMAL is not set
+-CONFIG_WATCHDOG=y
+-# CONFIG_WATCHDOG_NOWAYOUT is not set
+-
+-#
+-# Watchdog Device Drivers
+-#
+-# CONFIG_SOFT_WATCHDOG is not set
+-# CONFIG_BOOKE_WDT is not set
+-
+-#
+-# PCI-based Watchdog Cards
+-#
+-# CONFIG_PCIPCWATCHDOG is not set
+-# CONFIG_WDTPCI is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-CONFIG_DAB=y
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_AGP is not set
+-# CONFIG_DRM is not set
+-# CONFIG_VGASTATE is not set
+-CONFIG_VIDEO_OUTPUT_CONTROL=m
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-CONFIG_HID_SUPPORT=y
+-CONFIG_HID=y
+-# CONFIG_HID_DEBUG is not set
+-# CONFIG_HIDRAW is not set
+-CONFIG_USB_SUPPORT=y
+-CONFIG_USB_ARCH_HAS_HCD=y
+-CONFIG_USB_ARCH_HAS_OHCI=y
+-CONFIG_USB_ARCH_HAS_EHCI=y
+-# CONFIG_USB is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_INFINIBAND is not set
+-# CONFIG_EDAC is not set
+-CONFIG_RTC_LIB=y
+-CONFIG_RTC_CLASS=y
+-CONFIG_RTC_HCTOSYS=y
+-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+-# CONFIG_RTC_DEBUG is not set
+-
+-#
+-# RTC interfaces
+-#
+-CONFIG_RTC_INTF_SYSFS=y
+-CONFIG_RTC_INTF_PROC=y
+-CONFIG_RTC_INTF_DEV=y
+-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+-# CONFIG_RTC_DRV_TEST is not set
+-
+-#
+-# I2C RTC drivers
+-#
+-# CONFIG_RTC_DRV_DS1307 is not set
+-CONFIG_RTC_DRV_DS1374=y
+-# CONFIG_RTC_DRV_DS1672 is not set
+-# CONFIG_RTC_DRV_MAX6900 is not set
+-# CONFIG_RTC_DRV_RS5C372 is not set
+-# CONFIG_RTC_DRV_ISL1208 is not set
+-# CONFIG_RTC_DRV_X1205 is not set
+-# CONFIG_RTC_DRV_PCF8563 is not set
+-# CONFIG_RTC_DRV_PCF8583 is not set
+-# CONFIG_RTC_DRV_M41T80 is not set
+-# CONFIG_RTC_DRV_S35390A is not set
+-
+-#
+-# SPI RTC drivers
+-#
+-
+-#
+-# Platform RTC drivers
+-#
+-# CONFIG_RTC_DRV_CMOS is not set
+-# CONFIG_RTC_DRV_DS1511 is not set
+-# CONFIG_RTC_DRV_DS1553 is not set
+-# CONFIG_RTC_DRV_DS1742 is not set
+-# CONFIG_RTC_DRV_STK17TA8 is not set
+-# CONFIG_RTC_DRV_M48T86 is not set
+-# CONFIG_RTC_DRV_M48T59 is not set
+-# CONFIG_RTC_DRV_V3020 is not set
+-
+-#
+-# on-CPU RTC drivers
+-#
+-# CONFIG_DMADEVICES is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=y
+-CONFIG_EXT3_FS_XATTR=y
+-# CONFIG_EXT3_FS_POSIX_ACL is not set
+-# CONFIG_EXT3_FS_SECURITY is not set
+-# CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=y
+-CONFIG_FS_MBCACHE=y
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-# CONFIG_MSDOS_FS is not set
+-# CONFIG_VFAT_FS is not set
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-# CONFIG_CRAMFS is not set
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-CONFIG_NFS_V3=y
+-# CONFIG_NFS_V3_ACL is not set
+-CONFIG_NFS_V4=y
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_LOCKD_V4=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-CONFIG_SUNRPC_GSS=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-CONFIG_RPCSEC_GSS_KRB5=y
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-CONFIG_PARTITION_ADVANCED=y
+-# CONFIG_ACORN_PARTITION is not set
+-# CONFIG_OSF_PARTITION is not set
+-# CONFIG_AMIGA_PARTITION is not set
+-# CONFIG_ATARI_PARTITION is not set
+-# CONFIG_MAC_PARTITION is not set
+-# CONFIG_MSDOS_PARTITION is not set
+-# CONFIG_LDM_PARTITION is not set
+-# CONFIG_SGI_PARTITION is not set
+-# CONFIG_ULTRIX_PARTITION is not set
+-# CONFIG_SUN_PARTITION is not set
+-# CONFIG_KARMA_PARTITION is not set
+-# CONFIG_EFI_PARTITION is not set
+-# CONFIG_SYSV68_PARTITION is not set
+-# CONFIG_NLS is not set
+-# CONFIG_DLM is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-# CONFIG_MAGIC_SYSRQ is not set
+-# CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
+-# CONFIG_HEADERS_CHECK is not set
+-CONFIG_DEBUG_KERNEL=y
+-# CONFIG_DEBUG_SHIRQ is not set
+-CONFIG_DETECT_SOFTLOCKUP=y
+-CONFIG_SCHED_DEBUG=y
+-# CONFIG_SCHEDSTATS is not set
+-# CONFIG_TIMER_STATS is not set
+-# CONFIG_SLUB_DEBUG_ON is not set
+-# CONFIG_SLUB_STATS is not set
+-# CONFIG_DEBUG_RT_MUTEXES is not set
+-# CONFIG_RT_MUTEX_TESTER is not set
+-# CONFIG_DEBUG_SPINLOCK is not set
+-# CONFIG_DEBUG_MUTEXES is not set
+-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+-# CONFIG_DEBUG_KOBJECT is not set
+-# CONFIG_DEBUG_BUGVERBOSE is not set
+-# CONFIG_DEBUG_INFO is not set
+-# CONFIG_DEBUG_VM is not set
+-# CONFIG_DEBUG_LIST is not set
+-# CONFIG_DEBUG_SG is not set
+-# CONFIG_BOOT_PRINTK_DELAY is not set
+-# CONFIG_RCU_TORTURE_TEST is not set
+-# CONFIG_BACKTRACE_SELF_TEST is not set
+-# CONFIG_FAULT_INJECTION is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_DEBUG_STACKOVERFLOW is not set
+-# CONFIG_DEBUG_STACK_USAGE is not set
+-# CONFIG_DEBUG_PAGEALLOC is not set
+-CONFIG_DEBUGGER=y
+-# CONFIG_XMON is not set
+-# CONFIG_BDI_SWITCH is not set
+-CONFIG_PPC_EARLY_DEBUG=y
+-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+-# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
+-# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
+-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+-# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
+-# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
+-# CONFIG_PPC_EARLY_DEBUG_44x is not set
+-# CONFIG_PPC_EARLY_DEBUG_40x is not set
+-# CONFIG_PPC_EARLY_DEBUG_CPM is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_BLKCIPHER=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-CONFIG_CRYPTO_MANAGER=y
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-CONFIG_CRYPTO_MD5=y
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-CONFIG_CRYPTO_ECB=m
+-CONFIG_CRYPTO_CBC=y
+-CONFIG_CRYPTO_PCBC=m
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-CONFIG_CRYPTO_DES=y
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_TEST is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+-# CONFIG_PPC_CLOCK is not set
+-CONFIG_PPC_LIB_RHEAP=y
+--- a/arch/powerpc/configs/mpc8572_ds_defconfig
++++ /dev/null
+@@ -1,1549 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc7
+-# Mon Mar 31 11:37:06 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-# CONFIG_6xx is not set
+-CONFIG_PPC_85xx=y
+-# CONFIG_PPC_8xx is not set
+-# CONFIG_40x is not set
+-# CONFIG_44x is not set
+-# CONFIG_E200 is not set
+-CONFIG_E500=y
+-CONFIG_BOOKE=y
+-CONFIG_FSL_BOOKE=y
+-CONFIG_FSL_EMB_PERFMON=y
+-# CONFIG_PHYS_64BIT is not set
+-CONFIG_SPE=y
+-# CONFIG_PPC_MM_SLICES is not set
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-CONFIG_DEFAULT_UIMAGE=y
+-# CONFIG_PPC_DCR_NATIVE is not set
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-CONFIG_POSIX_MQUEUE=y
+-CONFIG_BSD_PROCESS_ACCT=y
+-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+-# CONFIG_TASKSTATS is not set
+-CONFIG_AUDIT=y
+-# CONFIG_AUDITSYSCALL is not set
+-CONFIG_IKCONFIG=y
+-CONFIG_IKCONFIG_PROC=y
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-# CONFIG_FAIR_GROUP_SCHED is not set
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-CONFIG_SYSFS_DEPRECATED_V2=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-CONFIG_KALLSYMS=y
+-CONFIG_KALLSYMS_ALL=y
+-CONFIG_KALLSYMS_EXTRA_PASS=y
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-CONFIG_EPOLL=y
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLUB_DEBUG=y
+-# CONFIG_SLAB is not set
+-CONFIG_SLUB=y
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-# CONFIG_KPROBES is not set
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_HAVE_KRETPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-CONFIG_MODULES=y
+-CONFIG_MODULE_UNLOAD=y
+-CONFIG_MODULE_FORCE_UNLOAD=y
+-CONFIG_MODVERSIONS=y
+-# CONFIG_MODULE_SRCVERSION_ALL is not set
+-CONFIG_KMOD=y
+-CONFIG_BLOCK=y
+-CONFIG_LBD=y
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-# CONFIG_DEFAULT_AS is not set
+-# CONFIG_DEFAULT_DEADLINE is not set
+-CONFIG_DEFAULT_CFQ=y
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="cfq"
+-CONFIG_CLASSIC_RCU=y
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-CONFIG_MPC85xx=y
+-# CONFIG_MPC8540_ADS is not set
+-# CONFIG_MPC8560_ADS is not set
+-# CONFIG_MPC85xx_CDS is not set
+-# CONFIG_MPC85xx_MDS is not set
+-CONFIG_MPC85xx_DS=y
+-# CONFIG_STX_GP3 is not set
+-# CONFIG_TQM8540 is not set
+-# CONFIG_TQM8541 is not set
+-# CONFIG_TQM8555 is not set
+-# CONFIG_TQM8560 is not set
+-# CONFIG_SBC8548 is not set
+-# CONFIG_SBC8560 is not set
+-# CONFIG_IPIC is not set
+-CONFIG_MPIC=y
+-# CONFIG_MPIC_WEIRD is not set
+-CONFIG_PPC_I8259=y
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-# CONFIG_CPM2 is not set
+-CONFIG_FSL_ULI1575=y
+-
+-#
+-# Kernel options
+-#
+-CONFIG_HIGHMEM=y
+-CONFIG_TICK_ONESHOT=y
+-CONFIG_NO_HZ=y
+-CONFIG_HIGH_RES_TIMERS=y
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_BINFMT_ELF=y
+-CONFIG_BINFMT_MISC=m
+-CONFIG_MATH_EMULATION=y
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_RESOURCES_64BIT is not set
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-CONFIG_PROC_DEVICETREE=y
+-# CONFIG_CMDLINE_BOOL is not set
+-# CONFIG_PM is not set
+-CONFIG_SECCOMP=y
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_GENERIC_ISA_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_FSL_SOC=y
+-CONFIG_FSL_PCI=y
+-CONFIG_PCI=y
+-CONFIG_PCI_DOMAINS=y
+-CONFIG_PCI_SYSCALL=y
+-# CONFIG_PCIEPORTBUS is not set
+-CONFIG_ARCH_SUPPORTS_MSI=y
+-# CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
+-# CONFIG_PCI_DEBUG is not set
+-# CONFIG_PCCARD is not set
+-# CONFIG_HOTPLUG_PCI is not set
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_BOOT_LOAD=0x00800000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-CONFIG_XFRM=y
+-CONFIG_XFRM_USER=y
+-# CONFIG_XFRM_SUB_POLICY is not set
+-# CONFIG_XFRM_MIGRATE is not set
+-# CONFIG_XFRM_STATISTICS is not set
+-CONFIG_NET_KEY=m
+-# CONFIG_NET_KEY_MIGRATE is not set
+-CONFIG_INET=y
+-CONFIG_IP_MULTICAST=y
+-CONFIG_IP_ADVANCED_ROUTER=y
+-CONFIG_ASK_IP_FIB_HASH=y
+-# CONFIG_IP_FIB_TRIE is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_MULTIPLE_TABLES=y
+-CONFIG_IP_ROUTE_MULTIPATH=y
+-CONFIG_IP_ROUTE_VERBOSE=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-CONFIG_IP_PNP_RARP=y
+-CONFIG_NET_IPIP=y
+-CONFIG_NET_IPGRE=y
+-CONFIG_NET_IPGRE_BROADCAST=y
+-CONFIG_IP_MROUTE=y
+-CONFIG_IP_PIMSM_V1=y
+-CONFIG_IP_PIMSM_V2=y
+-CONFIG_ARPD=y
+-# CONFIG_SYN_COOKIES is not set
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-CONFIG_INET_TUNNEL=y
+-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_BEET is not set
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-CONFIG_IPV6=y
+-# CONFIG_IPV6_PRIVACY is not set
+-# CONFIG_IPV6_ROUTER_PREF is not set
+-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+-# CONFIG_INET6_AH is not set
+-# CONFIG_INET6_ESP is not set
+-# CONFIG_INET6_IPCOMP is not set
+-# CONFIG_IPV6_MIP6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+-CONFIG_INET6_XFRM_MODE_TUNNEL=y
+-CONFIG_INET6_XFRM_MODE_BEET=y
+-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+-CONFIG_IPV6_SIT=y
+-# CONFIG_IPV6_TUNNEL is not set
+-# CONFIG_IPV6_MULTIPLE_TABLES is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-CONFIG_IP_SCTP=m
+-# CONFIG_SCTP_DBG_MSG is not set
+-# CONFIG_SCTP_DBG_OBJCNT is not set
+-# CONFIG_SCTP_HMAC_NONE is not set
+-# CONFIG_SCTP_HMAC_SHA1 is not set
+-CONFIG_SCTP_HMAC_MD5=y
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-CONFIG_FIB_RULES=y
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-CONFIG_FW_LOADER=y
+-# CONFIG_DEBUG_DRIVER is not set
+-# CONFIG_DEBUG_DEVRES is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-# CONFIG_CONNECTOR is not set
+-# CONFIG_MTD is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_CPQ_DA is not set
+-# CONFIG_BLK_CPQ_CISS_DA is not set
+-# CONFIG_BLK_DEV_DAC960 is not set
+-# CONFIG_BLK_DEV_UMEM is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-CONFIG_BLK_DEV_LOOP=y
+-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+-CONFIG_BLK_DEV_NBD=y
+-# CONFIG_BLK_DEV_SX8 is not set
+-# CONFIG_BLK_DEV_UB is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=131072
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_PHANTOM is not set
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_SGI_IOC4 is not set
+-# CONFIG_TIFM_CORE is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-# CONFIG_IDE is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-CONFIG_SCSI=y
+-CONFIG_SCSI_DMA=y
+-# CONFIG_SCSI_TGT is not set
+-# CONFIG_SCSI_NETLINK is not set
+-CONFIG_SCSI_PROC_FS=y
+-
+-#
+-# SCSI support type (disk, tape, CD-ROM)
+-#
+-CONFIG_BLK_DEV_SD=y
+-CONFIG_CHR_DEV_ST=y
+-# CONFIG_CHR_DEV_OSST is not set
+-CONFIG_BLK_DEV_SR=y
+-# CONFIG_BLK_DEV_SR_VENDOR is not set
+-CONFIG_CHR_DEV_SG=y
+-# CONFIG_CHR_DEV_SCH is not set
+-
+-#
+-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+-#
+-CONFIG_SCSI_MULTI_LUN=y
+-# CONFIG_SCSI_CONSTANTS is not set
+-CONFIG_SCSI_LOGGING=y
+-# CONFIG_SCSI_SCAN_ASYNC is not set
+-CONFIG_SCSI_WAIT_SCAN=m
+-
+-#
+-# SCSI Transports
+-#
+-# CONFIG_SCSI_SPI_ATTRS is not set
+-# CONFIG_SCSI_FC_ATTRS is not set
+-# CONFIG_SCSI_ISCSI_ATTRS is not set
+-# CONFIG_SCSI_SAS_LIBSAS is not set
+-# CONFIG_SCSI_SRP_ATTRS is not set
+-CONFIG_SCSI_LOWLEVEL=y
+-# CONFIG_ISCSI_TCP is not set
+-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+-# CONFIG_SCSI_3W_9XXX is not set
+-# CONFIG_SCSI_ACARD is not set
+-# CONFIG_SCSI_AACRAID is not set
+-# CONFIG_SCSI_AIC7XXX is not set
+-# CONFIG_SCSI_AIC7XXX_OLD is not set
+-# CONFIG_SCSI_AIC79XX is not set
+-# CONFIG_SCSI_AIC94XX is not set
+-# CONFIG_SCSI_DPT_I2O is not set
+-# CONFIG_SCSI_ADVANSYS is not set
+-# CONFIG_SCSI_ARCMSR is not set
+-# CONFIG_MEGARAID_NEWGEN is not set
+-# CONFIG_MEGARAID_LEGACY is not set
+-# CONFIG_MEGARAID_SAS is not set
+-# CONFIG_SCSI_HPTIOP is not set
+-# CONFIG_SCSI_BUSLOGIC is not set
+-# CONFIG_SCSI_DMX3191D is not set
+-# CONFIG_SCSI_EATA is not set
+-# CONFIG_SCSI_FUTURE_DOMAIN is not set
+-# CONFIG_SCSI_GDTH is not set
+-# CONFIG_SCSI_IPS is not set
+-# CONFIG_SCSI_INITIO is not set
+-# CONFIG_SCSI_INIA100 is not set
+-# CONFIG_SCSI_MVSAS is not set
+-# CONFIG_SCSI_STEX is not set
+-# CONFIG_SCSI_SYM53C8XX_2 is not set
+-# CONFIG_SCSI_IPR is not set
+-# CONFIG_SCSI_QLOGIC_1280 is not set
+-# CONFIG_SCSI_QLA_FC is not set
+-# CONFIG_SCSI_QLA_ISCSI is not set
+-# CONFIG_SCSI_LPFC is not set
+-# CONFIG_SCSI_DC395x is not set
+-# CONFIG_SCSI_DC390T is not set
+-# CONFIG_SCSI_NSP32 is not set
+-# CONFIG_SCSI_DEBUG is not set
+-# CONFIG_SCSI_SRP is not set
+-CONFIG_ATA=y
+-# CONFIG_ATA_NONSTANDARD is not set
+-CONFIG_SATA_AHCI=y
+-# CONFIG_SATA_SVW is not set
+-# CONFIG_ATA_PIIX is not set
+-# CONFIG_SATA_MV is not set
+-# CONFIG_SATA_NV is not set
+-# CONFIG_PDC_ADMA is not set
+-# CONFIG_SATA_QSTOR is not set
+-# CONFIG_SATA_PROMISE is not set
+-# CONFIG_SATA_SX4 is not set
+-# CONFIG_SATA_SIL is not set
+-# CONFIG_SATA_SIL24 is not set
+-# CONFIG_SATA_SIS is not set
+-# CONFIG_SATA_ULI is not set
+-# CONFIG_SATA_VIA is not set
+-# CONFIG_SATA_VITESSE is not set
+-# CONFIG_SATA_INIC162X is not set
+-# CONFIG_SATA_FSL is not set
+-CONFIG_PATA_ALI=y
+-# CONFIG_PATA_AMD is not set
+-# CONFIG_PATA_ARTOP is not set
+-# CONFIG_PATA_ATIIXP is not set
+-# CONFIG_PATA_CMD640_PCI is not set
+-# CONFIG_PATA_CMD64X is not set
+-# CONFIG_PATA_CS5520 is not set
+-# CONFIG_PATA_CS5530 is not set
+-# CONFIG_PATA_CYPRESS is not set
+-# CONFIG_PATA_EFAR is not set
+-# CONFIG_ATA_GENERIC is not set
+-# CONFIG_PATA_HPT366 is not set
+-# CONFIG_PATA_HPT37X is not set
+-# CONFIG_PATA_HPT3X2N is not set
+-# CONFIG_PATA_HPT3X3 is not set
+-# CONFIG_PATA_IT821X is not set
+-# CONFIG_PATA_IT8213 is not set
+-# CONFIG_PATA_JMICRON is not set
+-# CONFIG_PATA_TRIFLEX is not set
+-# CONFIG_PATA_MARVELL is not set
+-# CONFIG_PATA_MPIIX is not set
+-# CONFIG_PATA_OLDPIIX is not set
+-# CONFIG_PATA_NETCELL is not set
+-# CONFIG_PATA_NINJA32 is not set
+-# CONFIG_PATA_NS87410 is not set
+-# CONFIG_PATA_NS87415 is not set
+-# CONFIG_PATA_OPTI is not set
+-# CONFIG_PATA_OPTIDMA is not set
+-# CONFIG_PATA_PDC_OLD is not set
+-# CONFIG_PATA_RADISYS is not set
+-# CONFIG_PATA_RZ1000 is not set
+-# CONFIG_PATA_SC1200 is not set
+-# CONFIG_PATA_SERVERWORKS is not set
+-# CONFIG_PATA_PDC2027X is not set
+-# CONFIG_PATA_SIL680 is not set
+-# CONFIG_PATA_SIS is not set
+-# CONFIG_PATA_VIA is not set
+-# CONFIG_PATA_WINBOND is not set
+-# CONFIG_PATA_PLATFORM is not set
+-# CONFIG_MD is not set
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-# CONFIG_FIREWIRE is not set
+-# CONFIG_IEEE1394 is not set
+-# CONFIG_I2O is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-CONFIG_DUMMY=y
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_ARCNET is not set
+-CONFIG_PHYLIB=y
+-
+-#
+-# MII PHY device drivers
+-#
+-# CONFIG_MARVELL_PHY is not set
+-# CONFIG_DAVICOM_PHY is not set
+-# CONFIG_QSEMI_PHY is not set
+-# CONFIG_LXT_PHY is not set
+-# CONFIG_CICADA_PHY is not set
+-CONFIG_VITESSE_PHY=y
+-# CONFIG_SMSC_PHY is not set
+-# CONFIG_BROADCOM_PHY is not set
+-# CONFIG_ICPLUS_PHY is not set
+-# CONFIG_REALTEK_PHY is not set
+-# CONFIG_FIXED_PHY is not set
+-# CONFIG_MDIO_BITBANG is not set
+-CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
+-# CONFIG_HAPPYMEAL is not set
+-# CONFIG_SUNGEM is not set
+-# CONFIG_CASSINI is not set
+-# CONFIG_NET_VENDOR_3COM is not set
+-# CONFIG_NET_TULIP is not set
+-# CONFIG_HP100 is not set
+-# CONFIG_IBM_NEW_EMAC_ZMII is not set
+-# CONFIG_IBM_NEW_EMAC_RGMII is not set
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-# CONFIG_NET_PCI is not set
+-# CONFIG_B44 is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_ACENIC is not set
+-# CONFIG_DL2K is not set
+-# CONFIG_E1000 is not set
+-# CONFIG_E1000E is not set
+-# CONFIG_E1000E_ENABLED is not set
+-# CONFIG_IP1000 is not set
+-# CONFIG_IGB is not set
+-# CONFIG_NS83820 is not set
+-# CONFIG_HAMACHI is not set
+-# CONFIG_YELLOWFIN is not set
+-# CONFIG_R8169 is not set
+-# CONFIG_SIS190 is not set
+-# CONFIG_SKGE is not set
+-# CONFIG_SKY2 is not set
+-# CONFIG_SK98LIN is not set
+-# CONFIG_VIA_VELOCITY is not set
+-# CONFIG_TIGON3 is not set
+-# CONFIG_BNX2 is not set
+-CONFIG_GIANFAR=y
+-CONFIG_GFAR_NAPI=y
+-# CONFIG_QLA3XXX is not set
+-# CONFIG_ATL1 is not set
+-CONFIG_NETDEV_10000=y
+-# CONFIG_CHELSIO_T1 is not set
+-# CONFIG_CHELSIO_T3 is not set
+-# CONFIG_IXGBE is not set
+-# CONFIG_IXGB is not set
+-# CONFIG_S2IO is not set
+-# CONFIG_MYRI10GE is not set
+-# CONFIG_NETXEN_NIC is not set
+-# CONFIG_NIU is not set
+-# CONFIG_MLX4_CORE is not set
+-# CONFIG_TEHUTI is not set
+-# CONFIG_BNX2X is not set
+-# CONFIG_TR is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-
+-#
+-# USB Network Adapters
+-#
+-# CONFIG_USB_CATC is not set
+-# CONFIG_USB_KAWETH is not set
+-# CONFIG_USB_PEGASUS is not set
+-# CONFIG_USB_RTL8150 is not set
+-# CONFIG_USB_USBNET is not set
+-# CONFIG_WAN is not set
+-# CONFIG_FDDI is not set
+-# CONFIG_HIPPI is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NET_FC is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-CONFIG_INPUT=y
+-# CONFIG_INPUT_FF_MEMLESS is not set
+-# CONFIG_INPUT_POLLDEV is not set
+-
+-#
+-# Userland interfaces
+-#
+-# CONFIG_INPUT_MOUSEDEV is not set
+-# CONFIG_INPUT_JOYDEV is not set
+-# CONFIG_INPUT_EVDEV is not set
+-# CONFIG_INPUT_EVBUG is not set
+-
+-#
+-# Input Device Drivers
+-#
+-# CONFIG_INPUT_KEYBOARD is not set
+-# CONFIG_INPUT_MOUSE is not set
+-# CONFIG_INPUT_JOYSTICK is not set
+-# CONFIG_INPUT_TABLET is not set
+-# CONFIG_INPUT_TOUCHSCREEN is not set
+-# CONFIG_INPUT_MISC is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-CONFIG_SERIO=y
+-CONFIG_SERIO_I8042=y
+-CONFIG_SERIO_SERPORT=y
+-# CONFIG_SERIO_PCIPS2 is not set
+-CONFIG_SERIO_LIBPS2=y
+-# CONFIG_SERIO_RAW is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-CONFIG_VT=y
+-CONFIG_VT_CONSOLE=y
+-CONFIG_HW_CONSOLE=y
+-# CONFIG_VT_HW_CONSOLE_BINDING is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-# CONFIG_NOZOMI is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-CONFIG_SERIAL_8250_PCI=y
+-CONFIG_SERIAL_8250_NR_UARTS=2
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+-CONFIG_SERIAL_8250_EXTENDED=y
+-CONFIG_SERIAL_8250_MANY_PORTS=y
+-CONFIG_SERIAL_8250_SHARE_IRQ=y
+-CONFIG_SERIAL_8250_DETECT_IRQ=y
+-CONFIG_SERIAL_8250_RSA=y
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_JSM is not set
+-# CONFIG_SERIAL_OF_PLATFORM is not set
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-# CONFIG_HW_RANDOM is not set
+-CONFIG_NVRAM=y
+-# CONFIG_GEN_RTC is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_APPLICOM is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_DEVPORT=y
+-CONFIG_I2C=y
+-CONFIG_I2C_BOARDINFO=y
+-# CONFIG_I2C_CHARDEV is not set
+-
+-#
+-# I2C Algorithms
+-#
+-# CONFIG_I2C_ALGOBIT is not set
+-# CONFIG_I2C_ALGOPCF is not set
+-# CONFIG_I2C_ALGOPCA is not set
+-
+-#
+-# I2C Hardware Bus support
+-#
+-# CONFIG_I2C_ALI1535 is not set
+-# CONFIG_I2C_ALI1563 is not set
+-# CONFIG_I2C_ALI15X3 is not set
+-# CONFIG_I2C_AMD756 is not set
+-# CONFIG_I2C_AMD8111 is not set
+-# CONFIG_I2C_I801 is not set
+-# CONFIG_I2C_I810 is not set
+-# CONFIG_I2C_PIIX4 is not set
+-CONFIG_I2C_MPC=y
+-# CONFIG_I2C_NFORCE2 is not set
+-# CONFIG_I2C_OCORES is not set
+-# CONFIG_I2C_PARPORT_LIGHT is not set
+-# CONFIG_I2C_PROSAVAGE is not set
+-# CONFIG_I2C_SAVAGE4 is not set
+-# CONFIG_I2C_SIMTEC is not set
+-# CONFIG_I2C_SIS5595 is not set
+-# CONFIG_I2C_SIS630 is not set
+-# CONFIG_I2C_SIS96X is not set
+-# CONFIG_I2C_TAOS_EVM is not set
+-# CONFIG_I2C_STUB is not set
+-# CONFIG_I2C_TINY_USB is not set
+-# CONFIG_I2C_VIA is not set
+-# CONFIG_I2C_VIAPRO is not set
+-# CONFIG_I2C_VOODOO3 is not set
+-
+-#
+-# Miscellaneous I2C Chip support
+-#
+-# CONFIG_DS1682 is not set
+-CONFIG_SENSORS_EEPROM=y
+-# CONFIG_SENSORS_PCF8574 is not set
+-# CONFIG_PCF8575 is not set
+-# CONFIG_SENSORS_PCF8591 is not set
+-# CONFIG_TPS65010 is not set
+-# CONFIG_SENSORS_MAX6875 is not set
+-# CONFIG_SENSORS_TSL2550 is not set
+-# CONFIG_I2C_DEBUG_CORE is not set
+-# CONFIG_I2C_DEBUG_ALGO is not set
+-# CONFIG_I2C_DEBUG_BUS is not set
+-# CONFIG_I2C_DEBUG_CHIP is not set
+-
+-#
+-# SPI support
+-#
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-# CONFIG_HWMON is not set
+-# CONFIG_THERMAL is not set
+-# CONFIG_WATCHDOG is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-CONFIG_DVB_CORE=m
+-# CONFIG_DVB_CORE_ATTACH is not set
+-CONFIG_DVB_CAPTURE_DRIVERS=y
+-
+-#
+-# Supported SAA7146 based PCI Adapters
+-#
+-# CONFIG_TTPCI_EEPROM is not set
+-# CONFIG_DVB_BUDGET_CORE is not set
+-
+-#
+-# Supported USB Adapters
+-#
+-# CONFIG_DVB_USB is not set
+-# CONFIG_DVB_TTUSB_BUDGET is not set
+-# CONFIG_DVB_TTUSB_DEC is not set
+-# CONFIG_DVB_CINERGYT2 is not set
+-
+-#
+-# Supported FlexCopII (B2C2) Adapters
+-#
+-# CONFIG_DVB_B2C2_FLEXCOP is not set
+-
+-#
+-# Supported BT878 Adapters
+-#
+-
+-#
+-# Supported Pluto2 Adapters
+-#
+-# CONFIG_DVB_PLUTO2 is not set
+-
+-#
+-# Supported DVB Frontends
+-#
+-
+-#
+-# Customise DVB Frontends
+-#
+-# CONFIG_DVB_FE_CUSTOMISE is not set
+-
+-#
+-# DVB-S (satellite) frontends
+-#
+-# CONFIG_DVB_STV0299 is not set
+-# CONFIG_DVB_CX24110 is not set
+-# CONFIG_DVB_CX24123 is not set
+-# CONFIG_DVB_TDA8083 is not set
+-# CONFIG_DVB_MT312 is not set
+-# CONFIG_DVB_VES1X93 is not set
+-# CONFIG_DVB_S5H1420 is not set
+-# CONFIG_DVB_TDA10086 is not set
+-
+-#
+-# DVB-T (terrestrial) frontends
+-#
+-# CONFIG_DVB_SP8870 is not set
+-# CONFIG_DVB_SP887X is not set
+-# CONFIG_DVB_CX22700 is not set
+-# CONFIG_DVB_CX22702 is not set
+-# CONFIG_DVB_L64781 is not set
+-# CONFIG_DVB_TDA1004X is not set
+-# CONFIG_DVB_NXT6000 is not set
+-# CONFIG_DVB_MT352 is not set
+-# CONFIG_DVB_ZL10353 is not set
+-# CONFIG_DVB_DIB3000MB is not set
+-# CONFIG_DVB_DIB3000MC is not set
+-# CONFIG_DVB_DIB7000M is not set
+-# CONFIG_DVB_DIB7000P is not set
+-
+-#
+-# DVB-C (cable) frontends
+-#
+-# CONFIG_DVB_VES1820 is not set
+-# CONFIG_DVB_TDA10021 is not set
+-# CONFIG_DVB_TDA10023 is not set
+-# CONFIG_DVB_STV0297 is not set
+-
+-#
+-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+-#
+-# CONFIG_DVB_NXT200X is not set
+-# CONFIG_DVB_OR51211 is not set
+-# CONFIG_DVB_OR51132 is not set
+-# CONFIG_DVB_BCM3510 is not set
+-# CONFIG_DVB_LGDT330X is not set
+-# CONFIG_DVB_S5H1409 is not set
+-
+-#
+-# Tuners/PLL support
+-#
+-# CONFIG_DVB_PLL is not set
+-# CONFIG_DVB_TDA826X is not set
+-# CONFIG_DVB_TDA827X is not set
+-# CONFIG_DVB_TDA18271 is not set
+-# CONFIG_DVB_TUNER_QT1010 is not set
+-# CONFIG_DVB_TUNER_MT2060 is not set
+-# CONFIG_DVB_TUNER_MT2266 is not set
+-# CONFIG_DVB_TUNER_MT2131 is not set
+-# CONFIG_DVB_TUNER_DIB0070 is not set
+-# CONFIG_DVB_TUNER_XC5000 is not set
+-
+-#
+-# Miscellaneous devices
+-#
+-# CONFIG_DVB_LNBP21 is not set
+-# CONFIG_DVB_ISL6421 is not set
+-# CONFIG_DVB_TUA6100 is not set
+-CONFIG_DAB=y
+-# CONFIG_USB_DABUSB is not set
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_AGP is not set
+-# CONFIG_DRM is not set
+-# CONFIG_VGASTATE is not set
+-CONFIG_VIDEO_OUTPUT_CONTROL=y
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Console display driver support
+-#
+-CONFIG_VGA_CONSOLE=y
+-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+-CONFIG_DUMMY_CONSOLE=y
+-
+-#
+-# Sound
+-#
+-CONFIG_SOUND=y
+-
+-#
+-# Advanced Linux Sound Architecture
+-#
+-CONFIG_SND=y
+-CONFIG_SND_TIMER=y
+-CONFIG_SND_PCM=y
+-# CONFIG_SND_SEQUENCER is not set
+-# CONFIG_SND_MIXER_OSS is not set
+-# CONFIG_SND_PCM_OSS is not set
+-# CONFIG_SND_DYNAMIC_MINORS is not set
+-CONFIG_SND_SUPPORT_OLD_API=y
+-CONFIG_SND_VERBOSE_PROCFS=y
+-# CONFIG_SND_VERBOSE_PRINTK is not set
+-# CONFIG_SND_DEBUG is not set
+-
+-#
+-# Generic devices
+-#
+-CONFIG_SND_AC97_CODEC=y
+-# CONFIG_SND_DUMMY is not set
+-# CONFIG_SND_MTPAV is not set
+-# CONFIG_SND_SERIAL_U16550 is not set
+-# CONFIG_SND_MPU401 is not set
+-
+-#
+-# PCI devices
+-#
+-# CONFIG_SND_AD1889 is not set
+-# CONFIG_SND_ALS300 is not set
+-# CONFIG_SND_ALS4000 is not set
+-# CONFIG_SND_ALI5451 is not set
+-# CONFIG_SND_ATIIXP is not set
+-# CONFIG_SND_ATIIXP_MODEM is not set
+-# CONFIG_SND_AU8810 is not set
+-# CONFIG_SND_AU8820 is not set
+-# CONFIG_SND_AU8830 is not set
+-# CONFIG_SND_AZT3328 is not set
+-# CONFIG_SND_BT87X is not set
+-# CONFIG_SND_CA0106 is not set
+-# CONFIG_SND_CMIPCI is not set
+-# CONFIG_SND_OXYGEN is not set
+-# CONFIG_SND_CS4281 is not set
+-# CONFIG_SND_CS46XX is not set
+-# CONFIG_SND_CS5530 is not set
+-# CONFIG_SND_DARLA20 is not set
+-# CONFIG_SND_GINA20 is not set
+-# CONFIG_SND_LAYLA20 is not set
+-# CONFIG_SND_DARLA24 is not set
+-# CONFIG_SND_GINA24 is not set
+-# CONFIG_SND_LAYLA24 is not set
+-# CONFIG_SND_MONA is not set
+-# CONFIG_SND_MIA is not set
+-# CONFIG_SND_ECHO3G is not set
+-# CONFIG_SND_INDIGO is not set
+-# CONFIG_SND_INDIGOIO is not set
+-# CONFIG_SND_INDIGODJ is not set
+-# CONFIG_SND_EMU10K1 is not set
+-# CONFIG_SND_EMU10K1X is not set
+-# CONFIG_SND_ENS1370 is not set
+-# CONFIG_SND_ENS1371 is not set
+-# CONFIG_SND_ES1938 is not set
+-# CONFIG_SND_ES1968 is not set
+-# CONFIG_SND_FM801 is not set
+-# CONFIG_SND_HDA_INTEL is not set
+-# CONFIG_SND_HDSP is not set
+-# CONFIG_SND_HDSPM is not set
+-# CONFIG_SND_HIFIER is not set
+-# CONFIG_SND_ICE1712 is not set
+-# CONFIG_SND_ICE1724 is not set
+-CONFIG_SND_INTEL8X0=y
+-# CONFIG_SND_INTEL8X0M is not set
+-# CONFIG_SND_KORG1212 is not set
+-# CONFIG_SND_MAESTRO3 is not set
+-# CONFIG_SND_MIXART is not set
+-# CONFIG_SND_NM256 is not set
+-# CONFIG_SND_PCXHR is not set
+-# CONFIG_SND_RIPTIDE is not set
+-# CONFIG_SND_RME32 is not set
+-# CONFIG_SND_RME96 is not set
+-# CONFIG_SND_RME9652 is not set
+-# CONFIG_SND_SONICVIBES is not set
+-# CONFIG_SND_TRIDENT is not set
+-# CONFIG_SND_VIA82XX is not set
+-# CONFIG_SND_VIA82XX_MODEM is not set
+-# CONFIG_SND_VIRTUOSO is not set
+-# CONFIG_SND_VX222 is not set
+-# CONFIG_SND_YMFPCI is not set
+-# CONFIG_SND_AC97_POWER_SAVE is not set
+-
+-#
+-# ALSA PowerMac devices
+-#
+-
+-#
+-# ALSA PowerPC devices
+-#
+-
+-#
+-# USB devices
+-#
+-# CONFIG_SND_USB_AUDIO is not set
+-# CONFIG_SND_USB_USX2Y is not set
+-# CONFIG_SND_USB_CAIAQ is not set
+-
+-#
+-# System on Chip audio support
+-#
+-# CONFIG_SND_SOC is not set
+-
+-#
+-# SoC Audio support for SuperH
+-#
+-
+-#
+-# ALSA SoC audio for Freescale SOCs
+-#
+-
+-#
+-# Open Sound System
+-#
+-# CONFIG_SOUND_PRIME is not set
+-CONFIG_AC97_BUS=y
+-CONFIG_HID_SUPPORT=y
+-CONFIG_HID=y
+-# CONFIG_HID_DEBUG is not set
+-# CONFIG_HIDRAW is not set
+-
+-#
+-# USB Input Devices
+-#
+-CONFIG_USB_HID=y
+-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+-# CONFIG_HID_FF is not set
+-# CONFIG_USB_HIDDEV is not set
+-CONFIG_USB_SUPPORT=y
+-CONFIG_USB_ARCH_HAS_HCD=y
+-CONFIG_USB_ARCH_HAS_OHCI=y
+-CONFIG_USB_ARCH_HAS_EHCI=y
+-CONFIG_USB=y
+-# CONFIG_USB_DEBUG is not set
+-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+-
+-#
+-# Miscellaneous USB options
+-#
+-CONFIG_USB_DEVICEFS=y
+-CONFIG_USB_DEVICE_CLASS=y
+-# CONFIG_USB_DYNAMIC_MINORS is not set
+-# CONFIG_USB_OTG is not set
+-
+-#
+-# USB Host Controller Drivers
+-#
+-CONFIG_USB_EHCI_HCD=y
+-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+-# CONFIG_USB_EHCI_FSL is not set
+-CONFIG_USB_EHCI_HCD_PPC_OF=y
+-# CONFIG_USB_ISP116X_HCD is not set
+-CONFIG_USB_OHCI_HCD=y
+-CONFIG_USB_OHCI_HCD_PPC_OF=y
+-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+-CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+-CONFIG_USB_OHCI_HCD_PCI=y
+-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+-# CONFIG_USB_UHCI_HCD is not set
+-# CONFIG_USB_SL811_HCD is not set
+-# CONFIG_USB_R8A66597_HCD is not set
+-
+-#
+-# USB Device Class drivers
+-#
+-# CONFIG_USB_ACM is not set
+-# CONFIG_USB_PRINTER is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-
+-#
+-# may also be needed; see USB_STORAGE Help for more information
+-#
+-CONFIG_USB_STORAGE=y
+-# CONFIG_USB_STORAGE_DEBUG is not set
+-# CONFIG_USB_STORAGE_DATAFAB is not set
+-# CONFIG_USB_STORAGE_FREECOM is not set
+-# CONFIG_USB_STORAGE_ISD200 is not set
+-# CONFIG_USB_STORAGE_DPCM is not set
+-# CONFIG_USB_STORAGE_USBAT is not set
+-# CONFIG_USB_STORAGE_SDDR09 is not set
+-# CONFIG_USB_STORAGE_SDDR55 is not set
+-# CONFIG_USB_STORAGE_JUMPSHOT is not set
+-# CONFIG_USB_STORAGE_ALAUDA is not set
+-# CONFIG_USB_STORAGE_KARMA is not set
+-# CONFIG_USB_LIBUSUAL is not set
+-
+-#
+-# USB Imaging devices
+-#
+-# CONFIG_USB_MDC800 is not set
+-# CONFIG_USB_MICROTEK is not set
+-CONFIG_USB_MON=y
+-
+-#
+-# USB port drivers
+-#
+-# CONFIG_USB_SERIAL is not set
+-
+-#
+-# USB Miscellaneous drivers
+-#
+-# CONFIG_USB_EMI62 is not set
+-# CONFIG_USB_EMI26 is not set
+-# CONFIG_USB_ADUTUX is not set
+-# CONFIG_USB_AUERSWALD is not set
+-# CONFIG_USB_RIO500 is not set
+-# CONFIG_USB_LEGOTOWER is not set
+-# CONFIG_USB_LCD is not set
+-# CONFIG_USB_BERRY_CHARGE is not set
+-# CONFIG_USB_LED is not set
+-# CONFIG_USB_CYPRESS_CY7C63 is not set
+-# CONFIG_USB_CYTHERM is not set
+-# CONFIG_USB_PHIDGET is not set
+-# CONFIG_USB_IDMOUSE is not set
+-# CONFIG_USB_FTDI_ELAN is not set
+-# CONFIG_USB_APPLEDISPLAY is not set
+-# CONFIG_USB_SISUSBVGA is not set
+-# CONFIG_USB_LD is not set
+-# CONFIG_USB_TRANCEVIBRATOR is not set
+-# CONFIG_USB_IOWARRIOR is not set
+-# CONFIG_USB_TEST is not set
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_INFINIBAND is not set
+-# CONFIG_EDAC is not set
+-CONFIG_RTC_LIB=y
+-CONFIG_RTC_CLASS=y
+-CONFIG_RTC_HCTOSYS=y
+-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+-# CONFIG_RTC_DEBUG is not set
+-
+-#
+-# RTC interfaces
+-#
+-CONFIG_RTC_INTF_SYSFS=y
+-CONFIG_RTC_INTF_PROC=y
+-CONFIG_RTC_INTF_DEV=y
+-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+-# CONFIG_RTC_DRV_TEST is not set
+-
+-#
+-# I2C RTC drivers
+-#
+-# CONFIG_RTC_DRV_DS1307 is not set
+-# CONFIG_RTC_DRV_DS1374 is not set
+-# CONFIG_RTC_DRV_DS1672 is not set
+-# CONFIG_RTC_DRV_MAX6900 is not set
+-# CONFIG_RTC_DRV_RS5C372 is not set
+-# CONFIG_RTC_DRV_ISL1208 is not set
+-# CONFIG_RTC_DRV_X1205 is not set
+-# CONFIG_RTC_DRV_PCF8563 is not set
+-# CONFIG_RTC_DRV_PCF8583 is not set
+-# CONFIG_RTC_DRV_M41T80 is not set
+-# CONFIG_RTC_DRV_S35390A is not set
+-
+-#
+-# SPI RTC drivers
+-#
+-
+-#
+-# Platform RTC drivers
+-#
+-CONFIG_RTC_DRV_CMOS=y
+-# CONFIG_RTC_DRV_DS1511 is not set
+-# CONFIG_RTC_DRV_DS1553 is not set
+-# CONFIG_RTC_DRV_DS1742 is not set
+-# CONFIG_RTC_DRV_STK17TA8 is not set
+-# CONFIG_RTC_DRV_M48T86 is not set
+-# CONFIG_RTC_DRV_M48T59 is not set
+-# CONFIG_RTC_DRV_V3020 is not set
+-
+-#
+-# on-CPU RTC drivers
+-#
+-# CONFIG_DMADEVICES is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=y
+-CONFIG_EXT3_FS_XATTR=y
+-# CONFIG_EXT3_FS_POSIX_ACL is not set
+-# CONFIG_EXT3_FS_SECURITY is not set
+-# CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=y
+-CONFIG_FS_MBCACHE=y
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-CONFIG_ISO9660_FS=m
+-CONFIG_JOLIET=y
+-CONFIG_ZISOFS=y
+-CONFIG_UDF_FS=m
+-CONFIG_UDF_NLS=y
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-CONFIG_FAT_FS=y
+-CONFIG_MSDOS_FS=m
+-CONFIG_VFAT_FS=y
+-CONFIG_FAT_DEFAULT_CODEPAGE=437
+-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+-CONFIG_NTFS_FS=y
+-# CONFIG_NTFS_DEBUG is not set
+-# CONFIG_NTFS_RW is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-CONFIG_ADFS_FS=m
+-# CONFIG_ADFS_FS_RW is not set
+-CONFIG_AFFS_FS=m
+-CONFIG_HFS_FS=m
+-CONFIG_HFSPLUS_FS=m
+-CONFIG_BEFS_FS=m
+-# CONFIG_BEFS_DEBUG is not set
+-CONFIG_BFS_FS=m
+-CONFIG_EFS_FS=m
+-CONFIG_CRAMFS=y
+-CONFIG_VXFS_FS=m
+-# CONFIG_MINIX_FS is not set
+-CONFIG_HPFS_FS=m
+-CONFIG_QNX4FS_FS=m
+-# CONFIG_ROMFS_FS is not set
+-CONFIG_SYSV_FS=m
+-CONFIG_UFS_FS=m
+-# CONFIG_UFS_FS_WRITE is not set
+-# CONFIG_UFS_DEBUG is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-CONFIG_NFS_V3=y
+-# CONFIG_NFS_V3_ACL is not set
+-CONFIG_NFS_V4=y
+-# CONFIG_NFS_DIRECTIO is not set
+-CONFIG_NFSD=y
+-# CONFIG_NFSD_V3 is not set
+-CONFIG_NFSD_TCP=y
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_LOCKD_V4=y
+-CONFIG_EXPORTFS=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-CONFIG_SUNRPC_GSS=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-CONFIG_RPCSEC_GSS_KRB5=y
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-CONFIG_PARTITION_ADVANCED=y
+-# CONFIG_ACORN_PARTITION is not set
+-# CONFIG_OSF_PARTITION is not set
+-# CONFIG_AMIGA_PARTITION is not set
+-# CONFIG_ATARI_PARTITION is not set
+-CONFIG_MAC_PARTITION=y
+-CONFIG_MSDOS_PARTITION=y
+-# CONFIG_BSD_DISKLABEL is not set
+-# CONFIG_MINIX_SUBPARTITION is not set
+-# CONFIG_SOLARIS_X86_PARTITION is not set
+-# CONFIG_UNIXWARE_DISKLABEL is not set
+-# CONFIG_LDM_PARTITION is not set
+-# CONFIG_SGI_PARTITION is not set
+-# CONFIG_ULTRIX_PARTITION is not set
+-# CONFIG_SUN_PARTITION is not set
+-# CONFIG_KARMA_PARTITION is not set
+-# CONFIG_EFI_PARTITION is not set
+-# CONFIG_SYSV68_PARTITION is not set
+-CONFIG_NLS=y
+-CONFIG_NLS_DEFAULT="iso8859-1"
+-# CONFIG_NLS_CODEPAGE_437 is not set
+-# CONFIG_NLS_CODEPAGE_737 is not set
+-# CONFIG_NLS_CODEPAGE_775 is not set
+-# CONFIG_NLS_CODEPAGE_850 is not set
+-# CONFIG_NLS_CODEPAGE_852 is not set
+-# CONFIG_NLS_CODEPAGE_855 is not set
+-# CONFIG_NLS_CODEPAGE_857 is not set
+-# CONFIG_NLS_CODEPAGE_860 is not set
+-# CONFIG_NLS_CODEPAGE_861 is not set
+-# CONFIG_NLS_CODEPAGE_862 is not set
+-# CONFIG_NLS_CODEPAGE_863 is not set
+-# CONFIG_NLS_CODEPAGE_864 is not set
+-# CONFIG_NLS_CODEPAGE_865 is not set
+-# CONFIG_NLS_CODEPAGE_866 is not set
+-# CONFIG_NLS_CODEPAGE_869 is not set
+-# CONFIG_NLS_CODEPAGE_936 is not set
+-# CONFIG_NLS_CODEPAGE_950 is not set
+-# CONFIG_NLS_CODEPAGE_932 is not set
+-# CONFIG_NLS_CODEPAGE_949 is not set
+-# CONFIG_NLS_CODEPAGE_874 is not set
+-# CONFIG_NLS_ISO8859_8 is not set
+-# CONFIG_NLS_CODEPAGE_1250 is not set
+-# CONFIG_NLS_CODEPAGE_1251 is not set
+-# CONFIG_NLS_ASCII is not set
+-# CONFIG_NLS_ISO8859_1 is not set
+-# CONFIG_NLS_ISO8859_2 is not set
+-# CONFIG_NLS_ISO8859_3 is not set
+-# CONFIG_NLS_ISO8859_4 is not set
+-# CONFIG_NLS_ISO8859_5 is not set
+-# CONFIG_NLS_ISO8859_6 is not set
+-# CONFIG_NLS_ISO8859_7 is not set
+-# CONFIG_NLS_ISO8859_9 is not set
+-# CONFIG_NLS_ISO8859_13 is not set
+-# CONFIG_NLS_ISO8859_14 is not set
+-# CONFIG_NLS_ISO8859_15 is not set
+-# CONFIG_NLS_KOI8_R is not set
+-# CONFIG_NLS_KOI8_U is not set
+-CONFIG_NLS_UTF8=m
+-# CONFIG_DLM is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-CONFIG_LIBCRC32C=m
+-CONFIG_ZLIB_INFLATE=y
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-# CONFIG_MAGIC_SYSRQ is not set
+-# CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
+-# CONFIG_HEADERS_CHECK is not set
+-CONFIG_DEBUG_KERNEL=y
+-# CONFIG_DEBUG_SHIRQ is not set
+-CONFIG_DETECT_SOFTLOCKUP=y
+-CONFIG_SCHED_DEBUG=y
+-# CONFIG_SCHEDSTATS is not set
+-# CONFIG_TIMER_STATS is not set
+-# CONFIG_SLUB_DEBUG_ON is not set
+-# CONFIG_SLUB_STATS is not set
+-# CONFIG_DEBUG_RT_MUTEXES is not set
+-# CONFIG_RT_MUTEX_TESTER is not set
+-# CONFIG_DEBUG_SPINLOCK is not set
+-# CONFIG_DEBUG_MUTEXES is not set
+-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+-# CONFIG_DEBUG_KOBJECT is not set
+-# CONFIG_DEBUG_HIGHMEM is not set
+-# CONFIG_DEBUG_BUGVERBOSE is not set
+-CONFIG_DEBUG_INFO=y
+-# CONFIG_DEBUG_VM is not set
+-# CONFIG_DEBUG_LIST is not set
+-# CONFIG_DEBUG_SG is not set
+-# CONFIG_BOOT_PRINTK_DELAY is not set
+-# CONFIG_RCU_TORTURE_TEST is not set
+-# CONFIG_BACKTRACE_SELF_TEST is not set
+-# CONFIG_FAULT_INJECTION is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_DEBUG_STACKOVERFLOW is not set
+-# CONFIG_DEBUG_STACK_USAGE is not set
+-# CONFIG_DEBUG_PAGEALLOC is not set
+-# CONFIG_DEBUGGER is not set
+-# CONFIG_BDI_SWITCH is not set
+-# CONFIG_PPC_EARLY_DEBUG is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_BLKCIPHER=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-CONFIG_CRYPTO_HASH=y
+-CONFIG_CRYPTO_MANAGER=y
+-CONFIG_CRYPTO_HMAC=y
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-CONFIG_CRYPTO_MD5=y
+-CONFIG_CRYPTO_SHA1=m
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-# CONFIG_CRYPTO_ECB is not set
+-CONFIG_CRYPTO_CBC=y
+-CONFIG_CRYPTO_PCBC=m
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-CONFIG_CRYPTO_DES=y
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_TEST is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+-# CONFIG_PPC_CLOCK is not set
+--- a/arch/powerpc/configs/mpc85xx_cds_defconfig
++++ /dev/null
+@@ -1,935 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc6
+-# Mon Mar 24 08:48:30 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-# CONFIG_6xx is not set
+-CONFIG_PPC_85xx=y
+-# CONFIG_PPC_8xx is not set
+-# CONFIG_40x is not set
+-# CONFIG_44x is not set
+-# CONFIG_E200 is not set
+-CONFIG_E500=y
+-CONFIG_BOOKE=y
+-CONFIG_FSL_BOOKE=y
+-CONFIG_FSL_EMB_PERFMON=y
+-# CONFIG_PHYS_64BIT is not set
+-CONFIG_SPE=y
+-# CONFIG_PPC_MM_SLICES is not set
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-CONFIG_DEFAULT_UIMAGE=y
+-# CONFIG_PPC_DCR_NATIVE is not set
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-# CONFIG_POSIX_MQUEUE is not set
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-# CONFIG_FAIR_GROUP_SCHED is not set
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-CONFIG_SYSFS_DEPRECATED_V2=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-CONFIG_KALLSYMS=y
+-# CONFIG_KALLSYMS_ALL is not set
+-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-CONFIG_EPOLL=y
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLUB_DEBUG=y
+-# CONFIG_SLAB is not set
+-CONFIG_SLUB=y
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_HAVE_KRETPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-# CONFIG_MODULES is not set
+-CONFIG_BLOCK=y
+-# CONFIG_LBD is not set
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-CONFIG_MPC85xx=y
+-# CONFIG_MPC8540_ADS is not set
+-# CONFIG_MPC8560_ADS is not set
+-CONFIG_MPC85xx_CDS=y
+-# CONFIG_MPC85xx_MDS is not set
+-# CONFIG_MPC85xx_DS is not set
+-# CONFIG_STX_GP3 is not set
+-# CONFIG_TQM8540 is not set
+-# CONFIG_TQM8541 is not set
+-# CONFIG_TQM8555 is not set
+-# CONFIG_TQM8560 is not set
+-# CONFIG_SBC8548 is not set
+-# CONFIG_SBC8560 is not set
+-# CONFIG_IPIC is not set
+-CONFIG_MPIC=y
+-# CONFIG_MPIC_WEIRD is not set
+-CONFIG_PPC_I8259=y
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-# CONFIG_CPM2 is not set
+-# CONFIG_FSL_ULI1575 is not set
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-CONFIG_TICK_ONESHOT=y
+-CONFIG_NO_HZ=y
+-CONFIG_HIGH_RES_TIMERS=y
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_BINFMT_ELF=y
+-CONFIG_BINFMT_MISC=y
+-CONFIG_MATH_EMULATION=y
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_RESOURCES_64BIT is not set
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-CONFIG_PROC_DEVICETREE=y
+-# CONFIG_CMDLINE_BOOL is not set
+-# CONFIG_PM is not set
+-# CONFIG_SECCOMP is not set
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_FSL_SOC=y
+-CONFIG_FSL_PCI=y
+-CONFIG_PCI=y
+-CONFIG_PCI_DOMAINS=y
+-CONFIG_PCI_SYSCALL=y
+-# CONFIG_PCIEPORTBUS is not set
+-CONFIG_ARCH_SUPPORTS_MSI=y
+-# CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
+-# CONFIG_PCI_DEBUG is not set
+-# CONFIG_PCCARD is not set
+-# CONFIG_HOTPLUG_PCI is not set
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_BOOT_LOAD=0x00800000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-CONFIG_XFRM=y
+-CONFIG_XFRM_USER=y
+-# CONFIG_XFRM_SUB_POLICY is not set
+-# CONFIG_XFRM_MIGRATE is not set
+-# CONFIG_XFRM_STATISTICS is not set
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-CONFIG_IP_MULTICAST=y
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_IP_MROUTE is not set
+-# CONFIG_ARPD is not set
+-CONFIG_SYN_COOKIES=y
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-CONFIG_INET_XFRM_MODE_TRANSPORT=y
+-CONFIG_INET_XFRM_MODE_TUNNEL=y
+-CONFIG_INET_XFRM_MODE_BEET=y
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-# CONFIG_FW_LOADER is not set
+-# CONFIG_DEBUG_DRIVER is not set
+-# CONFIG_DEBUG_DEVRES is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-# CONFIG_CONNECTOR is not set
+-# CONFIG_MTD is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_CPQ_DA is not set
+-# CONFIG_BLK_CPQ_CISS_DA is not set
+-# CONFIG_BLK_DEV_DAC960 is not set
+-# CONFIG_BLK_DEV_UMEM is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-CONFIG_BLK_DEV_LOOP=y
+-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-# CONFIG_BLK_DEV_SX8 is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=32768
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_PHANTOM is not set
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_SGI_IOC4 is not set
+-# CONFIG_TIFM_CORE is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-CONFIG_IDE=y
+-CONFIG_IDE_MAX_HWIFS=4
+-CONFIG_BLK_DEV_IDE=y
+-
+-#
+-# Please see Documentation/ide/ide.txt for help/info on IDE drives
+-#
+-# CONFIG_BLK_DEV_IDE_SATA is not set
+-# CONFIG_BLK_DEV_IDEDISK is not set
+-# CONFIG_IDEDISK_MULTI_MODE is not set
+-# CONFIG_BLK_DEV_IDECD is not set
+-# CONFIG_BLK_DEV_IDETAPE is not set
+-# CONFIG_BLK_DEV_IDEFLOPPY is not set
+-# CONFIG_IDE_TASK_IOCTL is not set
+-CONFIG_IDE_PROC_FS=y
+-
+-#
+-# IDE chipset support/bugfixes
+-#
+-CONFIG_IDE_GENERIC=y
+-# CONFIG_BLK_DEV_PLATFORM is not set
+-CONFIG_BLK_DEV_IDEDMA_SFF=y
+-
+-#
+-# PCI IDE chipsets support
+-#
+-CONFIG_BLK_DEV_IDEPCI=y
+-CONFIG_IDEPCI_PCIBUS_ORDER=y
+-# CONFIG_BLK_DEV_OFFBOARD is not set
+-CONFIG_BLK_DEV_GENERIC=y
+-# CONFIG_BLK_DEV_OPTI621 is not set
+-CONFIG_BLK_DEV_IDEDMA_PCI=y
+-# CONFIG_BLK_DEV_AEC62XX is not set
+-# CONFIG_BLK_DEV_ALI15X3 is not set
+-# CONFIG_BLK_DEV_AMD74XX is not set
+-# CONFIG_BLK_DEV_CMD64X is not set
+-# CONFIG_BLK_DEV_TRIFLEX is not set
+-# CONFIG_BLK_DEV_CY82C693 is not set
+-# CONFIG_BLK_DEV_CS5520 is not set
+-# CONFIG_BLK_DEV_CS5530 is not set
+-# CONFIG_BLK_DEV_HPT34X is not set
+-# CONFIG_BLK_DEV_HPT366 is not set
+-# CONFIG_BLK_DEV_JMICRON is not set
+-# CONFIG_BLK_DEV_SC1200 is not set
+-# CONFIG_BLK_DEV_PIIX is not set
+-# CONFIG_BLK_DEV_IT8213 is not set
+-# CONFIG_BLK_DEV_IT821X is not set
+-# CONFIG_BLK_DEV_NS87415 is not set
+-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+-# CONFIG_BLK_DEV_SVWKS is not set
+-# CONFIG_BLK_DEV_SIIMAGE is not set
+-# CONFIG_BLK_DEV_SL82C105 is not set
+-# CONFIG_BLK_DEV_SLC90E66 is not set
+-# CONFIG_BLK_DEV_TRM290 is not set
+-CONFIG_BLK_DEV_VIA82CXXX=y
+-# CONFIG_BLK_DEV_TC86C001 is not set
+-CONFIG_BLK_DEV_IDEDMA=y
+-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+-# CONFIG_BLK_DEV_HD is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-# CONFIG_SCSI is not set
+-# CONFIG_SCSI_DMA is not set
+-# CONFIG_SCSI_NETLINK is not set
+-# CONFIG_ATA is not set
+-# CONFIG_MD is not set
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-# CONFIG_FIREWIRE is not set
+-# CONFIG_IEEE1394 is not set
+-# CONFIG_I2O is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_ARCNET is not set
+-CONFIG_PHYLIB=y
+-
+-#
+-# MII PHY device drivers
+-#
+-# CONFIG_MARVELL_PHY is not set
+-# CONFIG_DAVICOM_PHY is not set
+-# CONFIG_QSEMI_PHY is not set
+-# CONFIG_LXT_PHY is not set
+-# CONFIG_CICADA_PHY is not set
+-# CONFIG_VITESSE_PHY is not set
+-# CONFIG_SMSC_PHY is not set
+-# CONFIG_BROADCOM_PHY is not set
+-# CONFIG_ICPLUS_PHY is not set
+-# CONFIG_REALTEK_PHY is not set
+-# CONFIG_FIXED_PHY is not set
+-# CONFIG_MDIO_BITBANG is not set
+-CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
+-# CONFIG_HAPPYMEAL is not set
+-# CONFIG_SUNGEM is not set
+-# CONFIG_CASSINI is not set
+-# CONFIG_NET_VENDOR_3COM is not set
+-# CONFIG_NET_TULIP is not set
+-# CONFIG_HP100 is not set
+-# CONFIG_IBM_NEW_EMAC_ZMII is not set
+-# CONFIG_IBM_NEW_EMAC_RGMII is not set
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-# CONFIG_NET_PCI is not set
+-# CONFIG_B44 is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_ACENIC is not set
+-# CONFIG_DL2K is not set
+-CONFIG_E1000=y
+-CONFIG_E1000_NAPI=y
+-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+-# CONFIG_E1000E is not set
+-# CONFIG_E1000E_ENABLED is not set
+-# CONFIG_IP1000 is not set
+-# CONFIG_IGB is not set
+-# CONFIG_NS83820 is not set
+-# CONFIG_HAMACHI is not set
+-# CONFIG_YELLOWFIN is not set
+-# CONFIG_R8169 is not set
+-# CONFIG_SIS190 is not set
+-# CONFIG_SKGE is not set
+-# CONFIG_SKY2 is not set
+-# CONFIG_SK98LIN is not set
+-# CONFIG_VIA_VELOCITY is not set
+-# CONFIG_TIGON3 is not set
+-# CONFIG_BNX2 is not set
+-CONFIG_GIANFAR=y
+-CONFIG_GFAR_NAPI=y
+-# CONFIG_QLA3XXX is not set
+-# CONFIG_ATL1 is not set
+-CONFIG_NETDEV_10000=y
+-# CONFIG_CHELSIO_T1 is not set
+-# CONFIG_CHELSIO_T3 is not set
+-# CONFIG_IXGBE is not set
+-# CONFIG_IXGB is not set
+-# CONFIG_S2IO is not set
+-# CONFIG_MYRI10GE is not set
+-# CONFIG_NETXEN_NIC is not set
+-# CONFIG_NIU is not set
+-# CONFIG_MLX4_CORE is not set
+-# CONFIG_TEHUTI is not set
+-# CONFIG_BNX2X is not set
+-# CONFIG_TR is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-# CONFIG_WAN is not set
+-# CONFIG_FDDI is not set
+-# CONFIG_HIPPI is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-CONFIG_INPUT=y
+-# CONFIG_INPUT_FF_MEMLESS is not set
+-# CONFIG_INPUT_POLLDEV is not set
+-
+-#
+-# Userland interfaces
+-#
+-# CONFIG_INPUT_MOUSEDEV is not set
+-# CONFIG_INPUT_JOYDEV is not set
+-# CONFIG_INPUT_EVDEV is not set
+-# CONFIG_INPUT_EVBUG is not set
+-
+-#
+-# Input Device Drivers
+-#
+-# CONFIG_INPUT_KEYBOARD is not set
+-# CONFIG_INPUT_MOUSE is not set
+-# CONFIG_INPUT_JOYSTICK is not set
+-# CONFIG_INPUT_TABLET is not set
+-# CONFIG_INPUT_TOUCHSCREEN is not set
+-# CONFIG_INPUT_MISC is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-# CONFIG_NOZOMI is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-CONFIG_SERIAL_8250_PCI=y
+-CONFIG_SERIAL_8250_NR_UARTS=4
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-# CONFIG_SERIAL_8250_EXTENDED is not set
+-CONFIG_SERIAL_8250_SHARE_IRQ=y
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_JSM is not set
+-# CONFIG_SERIAL_OF_PLATFORM is not set
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-# CONFIG_HW_RANDOM is not set
+-# CONFIG_NVRAM is not set
+-CONFIG_GEN_RTC=y
+-# CONFIG_GEN_RTC_X is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_APPLICOM is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_DEVPORT=y
+-# CONFIG_I2C is not set
+-
+-#
+-# SPI support
+-#
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-CONFIG_HWMON=y
+-# CONFIG_HWMON_VID is not set
+-# CONFIG_SENSORS_I5K_AMB is not set
+-# CONFIG_SENSORS_F71805F is not set
+-# CONFIG_SENSORS_F71882FG is not set
+-# CONFIG_SENSORS_IT87 is not set
+-# CONFIG_SENSORS_PC87360 is not set
+-# CONFIG_SENSORS_PC87427 is not set
+-# CONFIG_SENSORS_SIS5595 is not set
+-# CONFIG_SENSORS_SMSC47M1 is not set
+-# CONFIG_SENSORS_SMSC47B397 is not set
+-# CONFIG_SENSORS_VIA686A is not set
+-# CONFIG_SENSORS_VT1211 is not set
+-# CONFIG_SENSORS_VT8231 is not set
+-# CONFIG_SENSORS_W83627HF is not set
+-# CONFIG_SENSORS_W83627EHF is not set
+-# CONFIG_HWMON_DEBUG_CHIP is not set
+-# CONFIG_THERMAL is not set
+-# CONFIG_WATCHDOG is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-CONFIG_DAB=y
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_AGP is not set
+-# CONFIG_DRM is not set
+-# CONFIG_VGASTATE is not set
+-CONFIG_VIDEO_OUTPUT_CONTROL=y
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-CONFIG_HID_SUPPORT=y
+-CONFIG_HID=y
+-# CONFIG_HID_DEBUG is not set
+-# CONFIG_HIDRAW is not set
+-CONFIG_USB_SUPPORT=y
+-CONFIG_USB_ARCH_HAS_HCD=y
+-CONFIG_USB_ARCH_HAS_OHCI=y
+-CONFIG_USB_ARCH_HAS_EHCI=y
+-# CONFIG_USB is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_INFINIBAND is not set
+-# CONFIG_EDAC is not set
+-# CONFIG_RTC_CLASS is not set
+-# CONFIG_DMADEVICES is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=y
+-CONFIG_EXT3_FS_XATTR=y
+-# CONFIG_EXT3_FS_POSIX_ACL is not set
+-# CONFIG_EXT3_FS_SECURITY is not set
+-# CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=y
+-CONFIG_FS_MBCACHE=y
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-# CONFIG_MSDOS_FS is not set
+-# CONFIG_VFAT_FS is not set
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-# CONFIG_CRAMFS is not set
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-# CONFIG_NFS_V3 is not set
+-# CONFIG_NFS_V4 is not set
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-# CONFIG_RPCSEC_GSS_KRB5 is not set
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-CONFIG_PARTITION_ADVANCED=y
+-# CONFIG_ACORN_PARTITION is not set
+-# CONFIG_OSF_PARTITION is not set
+-# CONFIG_AMIGA_PARTITION is not set
+-# CONFIG_ATARI_PARTITION is not set
+-# CONFIG_MAC_PARTITION is not set
+-# CONFIG_MSDOS_PARTITION is not set
+-# CONFIG_LDM_PARTITION is not set
+-# CONFIG_SGI_PARTITION is not set
+-# CONFIG_ULTRIX_PARTITION is not set
+-# CONFIG_SUN_PARTITION is not set
+-# CONFIG_KARMA_PARTITION is not set
+-# CONFIG_EFI_PARTITION is not set
+-# CONFIG_SYSV68_PARTITION is not set
+-# CONFIG_NLS is not set
+-# CONFIG_DLM is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-# CONFIG_MAGIC_SYSRQ is not set
+-# CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
+-# CONFIG_HEADERS_CHECK is not set
+-CONFIG_DEBUG_KERNEL=y
+-# CONFIG_DEBUG_SHIRQ is not set
+-CONFIG_DETECT_SOFTLOCKUP=y
+-CONFIG_SCHED_DEBUG=y
+-# CONFIG_SCHEDSTATS is not set
+-# CONFIG_TIMER_STATS is not set
+-# CONFIG_SLUB_DEBUG_ON is not set
+-# CONFIG_SLUB_STATS is not set
+-# CONFIG_DEBUG_RT_MUTEXES is not set
+-# CONFIG_RT_MUTEX_TESTER is not set
+-# CONFIG_DEBUG_SPINLOCK is not set
+-CONFIG_DEBUG_MUTEXES=y
+-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+-# CONFIG_DEBUG_KOBJECT is not set
+-# CONFIG_DEBUG_BUGVERBOSE is not set
+-# CONFIG_DEBUG_INFO is not set
+-# CONFIG_DEBUG_VM is not set
+-# CONFIG_DEBUG_LIST is not set
+-# CONFIG_DEBUG_SG is not set
+-# CONFIG_BOOT_PRINTK_DELAY is not set
+-# CONFIG_BACKTRACE_SELF_TEST is not set
+-# CONFIG_FAULT_INJECTION is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_DEBUG_STACKOVERFLOW is not set
+-# CONFIG_DEBUG_STACK_USAGE is not set
+-# CONFIG_DEBUG_PAGEALLOC is not set
+-# CONFIG_DEBUGGER is not set
+-# CONFIG_BDI_SWITCH is not set
+-# CONFIG_PPC_EARLY_DEBUG is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-# CONFIG_CRYPTO_MANAGER is not set
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-# CONFIG_CRYPTO_MD5 is not set
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-# CONFIG_CRYPTO_ECB is not set
+-# CONFIG_CRYPTO_CBC is not set
+-# CONFIG_CRYPTO_PCBC is not set
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-# CONFIG_CRYPTO_DES is not set
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+-# CONFIG_PPC_CLOCK is not set
+--- a/arch/powerpc/configs/pmac32_defconfig
++++ b/arch/powerpc/configs/pmac32_defconfig
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+ # Linux kernel version: 2.6.25-rc6
+-# Thu Mar 20 11:05:14 2008
++# Thu Mar 27 13:56:21 2008
+ #
+ # CONFIG_PPC64 is not set
+ 
+@@ -77,8 +77,6 @@ CONFIG_IKCONFIG_PROC=y
+ CONFIG_LOG_BUF_SHIFT=14
+ # CONFIG_CGROUPS is not set
+ # CONFIG_GROUP_SCHED is not set
+-# CONFIG_USER_SCHED is not set
+-# CONFIG_CGROUP_SCHED is not set
+ CONFIG_SYSFS_DEPRECATED=y
+ CONFIG_SYSFS_DEPRECATED_V2=y
+ # CONFIG_RELAY is not set
+@@ -272,7 +270,7 @@ CONFIG_PCI_SYSCALL=y
+ # CONFIG_PCIEPORTBUS is not set
+ CONFIG_ARCH_SUPPORTS_MSI=y
+ # CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
++# CONFIG_PCI_LEGACY is not set
+ # CONFIG_PCI_DEBUG is not set
+ CONFIG_PCCARD=m
+ # CONFIG_PCMCIA_DEBUG is not set
+@@ -1895,6 +1893,7 @@ CONFIG_PLIST=y
+ CONFIG_HAS_IOMEM=y
+ CONFIG_HAS_IOPORT=y
+ CONFIG_HAS_DMA=y
++CONFIG_HAVE_LMB=y
+ 
+ #
+ # Kernel hacking
+--- /dev/null
++++ b/arch/powerpc/configs/ppc40x_defconfig
+@@ -0,0 +1,896 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc9
++# Tue Apr 15 08:46:44 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++# CONFIG_6xx is not set
++# CONFIG_PPC_85xx is not set
++# CONFIG_PPC_8xx is not set
++CONFIG_40x=y
++# CONFIG_44x is not set
++# CONFIG_E200 is not set
++CONFIG_4xx=y
++# CONFIG_PPC_MM_SLICES is not set
++CONFIG_NOT_COHERENT_CACHE=y
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++# CONFIG_DEFAULT_UIMAGE is not set
++CONFIG_PPC_DCR_NATIVE=y
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_PPC_DCR=y
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++CONFIG_FAIR_GROUP_SCHED=y
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++CONFIG_KALLSYMS_ALL=y
++CONFIG_KALLSYMS_EXTRA_PASS=y
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++CONFIG_BLOCK=y
++CONFIG_LBD=y
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_CLASSIC_RCU=y
++CONFIG_PPC4xx_PCI_EXPRESS=y
++
++#
++# Platform support
++#
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++CONFIG_EP405=y
++CONFIG_KILAUEA=y
++CONFIG_MAKALU=y
++CONFIG_WALNUT=y
++CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y
++CONFIG_405GP=y
++CONFIG_405EX=y
++CONFIG_XILINX_VIRTEX=y
++CONFIG_XILINX_VIRTEX_II_PRO=y
++CONFIG_XILINX_VIRTEX_4_FX=y
++CONFIG_IBM405_ERR77=y
++CONFIG_IBM405_ERR51=y
++# CONFIG_IPIC is not set
++# CONFIG_MPIC is not set
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++# CONFIG_FSL_ULI1575 is not set
++CONFIG_OF_RTC=y
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++# CONFIG_TICK_ONESHOT is not set
++# CONFIG_NO_HZ is not set
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++# CONFIG_MATH_EMULATION is not set
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++CONFIG_RESOURCES_64BIT=y
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++CONFIG_FORCE_MAX_ZONEORDER=11
++CONFIG_PROC_DEVICETREE=y
++# CONFIG_CMDLINE_BOOL is not set
++# CONFIG_PM is not set
++CONFIG_SECCOMP=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_4xx_SOC=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++# CONFIG_PCIEPORTBUS is not set
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++# CONFIG_PCI_LEGACY is not set
++# CONFIG_PCI_DEBUG is not set
++# CONFIG_PCCARD is not set
++# CONFIG_HOTPLUG_PCI is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_CONSISTENT_START=0xff100000
++CONFIG_CONSISTENT_SIZE=0x00200000
++CONFIG_BOOT_LOAD=0x00400000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++CONFIG_CONNECTOR=y
++CONFIG_PROC_EVENTS=y
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_MTD_OF_PARTS=y
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=m
++CONFIG_MTD_BLOCK=m
++# CONFIG_MTD_BLOCK_RO is not set
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++CONFIG_MTD_JEDECPROBE=y
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PHYSMAP is not set
++CONFIG_MTD_PHYSMAP_OF=y
++# CONFIG_MTD_INTEL_VR_NOR is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_PMC551 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++# CONFIG_BLK_DEV_LOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=35000
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_XILINX_SYSACE is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_SGI_IOC4 is not set
++# CONFIG_TIFM_CORE is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++# CONFIG_PHYLIB is not set
++CONFIG_NET_ETHERNET=y
++# CONFIG_MII is not set
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++CONFIG_IBM_NEW_EMAC=y
++CONFIG_IBM_NEW_EMAC_RXB=128
++CONFIG_IBM_NEW_EMAC_TXB=64
++CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
++CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
++CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
++# CONFIG_IBM_NEW_EMAC_DEBUG is not set
++CONFIG_IBM_NEW_EMAC_ZMII=y
++CONFIG_IBM_NEW_EMAC_RGMII=y
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++CONFIG_IBM_NEW_EMAC_EMAC4=y
++# CONFIG_NET_PCI is not set
++# CONFIG_B44 is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++# CONFIG_E1000 is not set
++# CONFIG_E1000E is not set
++# CONFIG_E1000E_ENABLED is not set
++# CONFIG_IP1000 is not set
++# CONFIG_IGB is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++# CONFIG_R8169 is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_VIA_VELOCITY is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++# CONFIG_QLA3XXX is not set
++# CONFIG_ATL1 is not set
++CONFIG_NETDEV_10000=y
++# CONFIG_CHELSIO_T1 is not set
++# CONFIG_CHELSIO_T3 is not set
++# CONFIG_IXGBE is not set
++# CONFIG_IXGB is not set
++# CONFIG_S2IO is not set
++# CONFIG_MYRI10GE is not set
++# CONFIG_NETXEN_NIC is not set
++# CONFIG_NIU is not set
++# CONFIG_MLX4_CORE is not set
++# CONFIG_TEHUTI is not set
++# CONFIG_BNX2X is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++# CONFIG_INPUT is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++# CONFIG_VT is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_PCI=y
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++CONFIG_SERIAL_8250_EXTENDED=y
++# CONFIG_SERIAL_8250_MANY_PORTS is not set
++CONFIG_SERIAL_8250_SHARE_IRQ=y
++# CONFIG_SERIAL_8250_DETECT_IRQ is not set
++# CONFIG_SERIAL_8250_RSA is not set
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_JSM is not set
++CONFIG_SERIAL_OF_PLATFORM=y
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_NVRAM is not set
++# CONFIG_GEN_RTC is not set
++CONFIG_XILINX_HWICAP=m
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++# CONFIG_I2C is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++CONFIG_THERMAL=y
++# CONFIG_WATCHDOG is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=m
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++# CONFIG_USB is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++# CONFIG_RTC_CLASS is not set
++# CONFIG_DMADEVICES is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++# CONFIG_EXT3_FS is not set
++# CONFIG_EXT4DEV_FS is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_JFFS2_FS is not set
++CONFIG_CRAMFS=y
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++# CONFIG_NFS_V4 is not set
++# CONFIG_NFS_DIRECTIO is not set
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++# CONFIG_SUNRPC_BIND34 is not set
++# CONFIG_RPCSEC_GSS_KRB5 is not set
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_NLS is not set
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++CONFIG_HAVE_LMB=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_DEBUG_STACKOVERFLOW is not set
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++# CONFIG_DEBUGGER is not set
++# CONFIG_VIRQ_DEBUG is not set
++# CONFIG_BDI_SWITCH is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_BLKCIPHER=y
++# CONFIG_CRYPTO_SEQIV is not set
++CONFIG_CRYPTO_MANAGER=y
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++CONFIG_CRYPTO_ECB=y
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=y
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_TEST is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_CRYPTO_DEV_HIFN_795X is not set
++# CONFIG_PPC_CLOCK is not set
+--- a/arch/powerpc/configs/ppc44x_defconfig
++++ b/arch/powerpc/configs/ppc44x_defconfig
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc2
+-# Fri Feb 15 21:57:35 2008
++# Linux kernel version: 2.6.25-rc6
++# Sat Apr  5 09:35:48 2008
+ #
+ # CONFIG_PPC64 is not set
+ 
+@@ -79,6 +79,7 @@ CONFIG_FAIR_GROUP_SCHED=y
+ CONFIG_USER_SCHED=y
+ # CONFIG_CGROUP_SCHED is not set
+ CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
+ # CONFIG_RELAY is not set
+ # CONFIG_NAMESPACES is not set
+ CONFIG_BLK_DEV_INITRD=y
+@@ -113,6 +114,7 @@ CONFIG_SLUB=y
+ CONFIG_HAVE_OPROFILE=y
+ # CONFIG_KPROBES is not set
+ CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
+ CONFIG_PROC_PAGE_MONITOR=y
+ CONFIG_SLABINFO=y
+ CONFIG_RT_MUTEXES=y
+@@ -143,7 +145,6 @@ CONFIG_DEFAULT_AS=y
+ # CONFIG_DEFAULT_NOOP is not set
+ CONFIG_DEFAULT_IOSCHED="anticipatory"
+ CONFIG_CLASSIC_RCU=y
+-# CONFIG_PREEMPT_RCU is not set
+ CONFIG_PPC4xx_PCI_EXPRESS=y
+ 
+ #
+@@ -161,12 +162,15 @@ CONFIG_TAISHAN=y
+ CONFIG_KATMAI=y
+ CONFIG_RAINIER=y
+ CONFIG_WARP=y
++CONFIG_CANYONLANDS=y
++CONFIG_YOSEMITE=y
+ CONFIG_440EP=y
+ CONFIG_440EPX=y
+ CONFIG_440GRX=y
+ CONFIG_440GP=y
+ CONFIG_440GX=y
+ CONFIG_440SPe=y
++CONFIG_460EX=y
+ CONFIG_IBM440EP_ERR42=y
+ # CONFIG_IPIC is not set
+ # CONFIG_MPIC is not set
+@@ -199,7 +203,6 @@ CONFIG_HZ=250
+ CONFIG_PREEMPT_NONE=y
+ # CONFIG_PREEMPT_VOLUNTARY is not set
+ # CONFIG_PREEMPT is not set
+-# CONFIG_RCU_TRACE is not set
+ CONFIG_BINFMT_ELF=y
+ # CONFIG_BINFMT_MISC is not set
+ CONFIG_MATH_EMULATION=y
+@@ -232,6 +235,7 @@ CONFIG_ISA_DMA_API=y
+ #
+ CONFIG_ZONE_DMA=y
+ CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_4xx_SOC=y
+ CONFIG_PCI=y
+ CONFIG_PCI_DOMAINS=y
+ CONFIG_PCI_SYSCALL=y
+@@ -678,6 +682,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
+ # CONFIG_INFINIBAND is not set
+ # CONFIG_EDAC is not set
+ # CONFIG_RTC_CLASS is not set
++# CONFIG_DMADEVICES is not set
+ 
+ #
+ # Userspace I/O
+@@ -805,6 +810,7 @@ CONFIG_PLIST=y
+ CONFIG_HAS_IOMEM=y
+ CONFIG_HAS_IOPORT=y
+ CONFIG_HAS_DMA=y
++CONFIG_HAVE_LMB=y
+ 
+ #
+ # Kernel hacking
+--- a/arch/powerpc/configs/ppc64_defconfig
++++ b/arch/powerpc/configs/ppc64_defconfig
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+ # Linux kernel version: 2.6.25-rc6
+-# Thu Mar 20 11:06:28 2008
++# Thu Mar 27 13:56:24 2008
+ #
+ CONFIG_PPC64=y
+ 
+@@ -84,8 +84,6 @@ CONFIG_CGROUPS=y
+ # CONFIG_CGROUP_NS is not set
+ CONFIG_CPUSETS=y
+ # CONFIG_GROUP_SCHED is not set
+-# CONFIG_USER_SCHED is not set
+-# CONFIG_CGROUP_SCHED is not set
+ # CONFIG_CGROUP_CPUACCT is not set
+ # CONFIG_RESOURCE_COUNTERS is not set
+ CONFIG_SYSFS_DEPRECATED=y
+@@ -289,6 +287,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y
+ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+ CONFIG_KEXEC=y
+ # CONFIG_CRASH_DUMP is not set
++# CONFIG_PHYP_DUMP is not set
+ CONFIG_IRQ_ALL_CPUS=y
+ # CONFIG_NUMA is not set
+ CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+@@ -335,7 +334,7 @@ CONFIG_PCI_SYSCALL=y
+ # CONFIG_PCIEPORTBUS is not set
+ CONFIG_ARCH_SUPPORTS_MSI=y
+ CONFIG_PCI_MSI=y
+-CONFIG_PCI_LEGACY=y
++# CONFIG_PCI_LEGACY is not set
+ # CONFIG_PCI_DEBUG is not set
+ CONFIG_PCCARD=y
+ # CONFIG_PCMCIA_DEBUG is not set
+@@ -1881,6 +1880,7 @@ CONFIG_PLIST=y
+ CONFIG_HAS_IOMEM=y
+ CONFIG_HAS_IOPORT=y
+ CONFIG_HAS_DMA=y
++CONFIG_HAVE_LMB=y
+ 
+ #
+ # Kernel hacking
+--- a/arch/powerpc/configs/pseries_defconfig
++++ b/arch/powerpc/configs/pseries_defconfig
+@@ -1,7 +1,7 @@
+ #
+ # Automatically generated make config: don't edit
+ # Linux kernel version: 2.6.25-rc6
+-# Thu Mar 20 11:08:01 2008
++# Thu Mar 27 13:56:28 2008
+ #
+ CONFIG_PPC64=y
+ 
+@@ -83,8 +83,6 @@ CONFIG_CGROUPS=y
+ CONFIG_CGROUP_NS=y
+ CONFIG_CPUSETS=y
+ # CONFIG_GROUP_SCHED is not set
+-# CONFIG_USER_SCHED is not set
+-# CONFIG_CGROUP_SCHED is not set
+ CONFIG_CGROUP_CPUACCT=y
+ # CONFIG_RESOURCE_COUNTERS is not set
+ CONFIG_SYSFS_DEPRECATED=y
+@@ -237,6 +235,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y
+ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+ CONFIG_KEXEC=y
+ # CONFIG_CRASH_DUMP is not set
++# CONFIG_PHYP_DUMP is not set
+ CONFIG_IRQ_ALL_CPUS=y
+ CONFIG_NUMA=y
+ CONFIG_NODES_SHIFT=4
+@@ -283,7 +282,7 @@ CONFIG_PCI_SYSCALL=y
+ # CONFIG_PCIEPORTBUS is not set
+ CONFIG_ARCH_SUPPORTS_MSI=y
+ CONFIG_PCI_MSI=y
+-CONFIG_PCI_LEGACY=y
++# CONFIG_PCI_LEGACY is not set
+ # CONFIG_PCI_DEBUG is not set
+ # CONFIG_PCCARD is not set
+ CONFIG_HOTPLUG_PCI=m
+@@ -1519,6 +1518,7 @@ CONFIG_PLIST=y
+ CONFIG_HAS_IOMEM=y
+ CONFIG_HAS_IOPORT=y
+ CONFIG_HAS_DMA=y
++CONFIG_HAVE_LMB=y
+ 
+ #
+ # Kernel hacking
+--- a/arch/powerpc/configs/rainier_defconfig
++++ /dev/null
+@@ -1,899 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc2
+-# Fri Feb 15 21:53:10 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-# CONFIG_6xx is not set
+-# CONFIG_PPC_85xx is not set
+-# CONFIG_PPC_8xx is not set
+-# CONFIG_40x is not set
+-CONFIG_44x=y
+-# CONFIG_E200 is not set
+-CONFIG_4xx=y
+-CONFIG_BOOKE=y
+-CONFIG_PTE_64BIT=y
+-CONFIG_PHYS_64BIT=y
+-# CONFIG_PPC_MM_SLICES is not set
+-CONFIG_NOT_COHERENT_CACHE=y
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-# CONFIG_DEFAULT_UIMAGE is not set
+-CONFIG_PPC_DCR_NATIVE=y
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_PPC_DCR=y
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-CONFIG_POSIX_MQUEUE=y
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-CONFIG_FAIR_GROUP_SCHED=y
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-CONFIG_KALLSYMS=y
+-# CONFIG_KALLSYMS_ALL is not set
+-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-CONFIG_EPOLL=y
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLUB_DEBUG=y
+-# CONFIG_SLAB is not set
+-CONFIG_SLUB=y
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-# CONFIG_KPROBES is not set
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-CONFIG_MODULES=y
+-CONFIG_MODULE_UNLOAD=y
+-# CONFIG_MODULE_FORCE_UNLOAD is not set
+-# CONFIG_MODVERSIONS is not set
+-# CONFIG_MODULE_SRCVERSION_ALL is not set
+-CONFIG_KMOD=y
+-CONFIG_BLOCK=y
+-CONFIG_LBD=y
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-# CONFIG_PREEMPT_RCU is not set
+-# CONFIG_PPC4xx_PCI_EXPRESS is not set
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-# CONFIG_BAMBOO is not set
+-# CONFIG_EBONY is not set
+-# CONFIG_SEQUOIA is not set
+-# CONFIG_TAISHAN is not set
+-# CONFIG_KATMAI is not set
+-CONFIG_RAINIER=y
+-# CONFIG_WARP is not set
+-CONFIG_440GRX=y
+-# CONFIG_IPIC is not set
+-# CONFIG_MPIC is not set
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-# CONFIG_FSL_ULI1575 is not set
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-# CONFIG_TICK_ONESHOT is not set
+-# CONFIG_NO_HZ is not set
+-# CONFIG_HIGH_RES_TIMERS is not set
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_RCU_TRACE=y
+-CONFIG_BINFMT_ELF=y
+-# CONFIG_BINFMT_MISC is not set
+-CONFIG_MATH_EMULATION=y
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-CONFIG_RESOURCES_64BIT=y
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-CONFIG_PROC_DEVICETREE=y
+-CONFIG_CMDLINE_BOOL=y
+-CONFIG_CMDLINE=""
+-CONFIG_SECCOMP=y
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_PCI=y
+-CONFIG_PCI_DOMAINS=y
+-CONFIG_PCI_SYSCALL=y
+-# CONFIG_PCIEPORTBUS is not set
+-CONFIG_ARCH_SUPPORTS_MSI=y
+-# CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
+-# CONFIG_PCI_DEBUG is not set
+-# CONFIG_PCCARD is not set
+-# CONFIG_HOTPLUG_PCI is not set
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_CONSISTENT_START=0xff100000
+-CONFIG_CONSISTENT_SIZE=0x00200000
+-CONFIG_BOOT_LOAD=0x01000000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-# CONFIG_IP_MULTICAST is not set
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_ARPD is not set
+-# CONFIG_SYN_COOKIES is not set
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_BEET is not set
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-CONFIG_FW_LOADER=y
+-# CONFIG_DEBUG_DRIVER is not set
+-# CONFIG_DEBUG_DEVRES is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-CONFIG_CONNECTOR=y
+-CONFIG_PROC_EVENTS=y
+-CONFIG_MTD=y
+-# CONFIG_MTD_DEBUG is not set
+-# CONFIG_MTD_CONCAT is not set
+-CONFIG_MTD_PARTITIONS=y
+-# CONFIG_MTD_REDBOOT_PARTS is not set
+-CONFIG_MTD_CMDLINE_PARTS=y
+-CONFIG_MTD_OF_PARTS=y
+-
+-#
+-# User Modules And Translation Layers
+-#
+-CONFIG_MTD_CHAR=y
+-# CONFIG_MTD_BLKDEVS is not set
+-# CONFIG_MTD_BLOCK is not set
+-# CONFIG_MTD_BLOCK_RO is not set
+-# CONFIG_FTL is not set
+-# CONFIG_NFTL is not set
+-# CONFIG_INFTL is not set
+-# CONFIG_RFD_FTL is not set
+-# CONFIG_SSFDC is not set
+-# CONFIG_MTD_OOPS is not set
+-
+-#
+-# RAM/ROM/Flash chip drivers
+-#
+-CONFIG_MTD_CFI=y
+-CONFIG_MTD_JEDECPROBE=y
+-CONFIG_MTD_GEN_PROBE=y
+-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+-CONFIG_MTD_MAP_BANK_WIDTH_1=y
+-CONFIG_MTD_MAP_BANK_WIDTH_2=y
+-CONFIG_MTD_MAP_BANK_WIDTH_4=y
+-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+-CONFIG_MTD_CFI_I1=y
+-CONFIG_MTD_CFI_I2=y
+-# CONFIG_MTD_CFI_I4 is not set
+-# CONFIG_MTD_CFI_I8 is not set
+-CONFIG_MTD_CFI_INTELEXT=y
+-CONFIG_MTD_CFI_AMDSTD=y
+-# CONFIG_MTD_CFI_STAA is not set
+-CONFIG_MTD_CFI_UTIL=y
+-# CONFIG_MTD_RAM is not set
+-# CONFIG_MTD_ROM is not set
+-# CONFIG_MTD_ABSENT is not set
+-
+-#
+-# Mapping drivers for chip access
+-#
+-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+-# CONFIG_MTD_PHYSMAP is not set
+-CONFIG_MTD_PHYSMAP_OF=y
+-# CONFIG_MTD_INTEL_VR_NOR is not set
+-# CONFIG_MTD_PLATRAM is not set
+-
+-#
+-# Self-contained MTD device drivers
+-#
+-# CONFIG_MTD_PMC551 is not set
+-# CONFIG_MTD_SLRAM is not set
+-# CONFIG_MTD_PHRAM is not set
+-# CONFIG_MTD_MTDRAM is not set
+-# CONFIG_MTD_BLOCK2MTD is not set
+-
+-#
+-# Disk-On-Chip Device Drivers
+-#
+-# CONFIG_MTD_DOC2000 is not set
+-# CONFIG_MTD_DOC2001 is not set
+-# CONFIG_MTD_DOC2001PLUS is not set
+-# CONFIG_MTD_NAND is not set
+-# CONFIG_MTD_ONENAND is not set
+-
+-#
+-# UBI - Unsorted block images
+-#
+-# CONFIG_MTD_UBI is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_CPQ_DA is not set
+-# CONFIG_BLK_CPQ_CISS_DA is not set
+-# CONFIG_BLK_DEV_DAC960 is not set
+-# CONFIG_BLK_DEV_UMEM is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-# CONFIG_BLK_DEV_LOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-# CONFIG_BLK_DEV_SX8 is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=35000
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-# CONFIG_XILINX_SYSACE is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_PHANTOM is not set
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_SGI_IOC4 is not set
+-# CONFIG_TIFM_CORE is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-# CONFIG_IDE is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-# CONFIG_SCSI is not set
+-# CONFIG_SCSI_DMA is not set
+-# CONFIG_SCSI_NETLINK is not set
+-# CONFIG_ATA is not set
+-# CONFIG_MD is not set
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-# CONFIG_FIREWIRE is not set
+-# CONFIG_IEEE1394 is not set
+-# CONFIG_I2O is not set
+-CONFIG_MACINTOSH_DRIVERS=y
+-# CONFIG_MAC_EMUMOUSEBTN is not set
+-# CONFIG_WINDFARM is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_ARCNET is not set
+-# CONFIG_NET_ETHERNET is not set
+-CONFIG_IBM_NEW_EMAC_ZMII=y
+-CONFIG_IBM_NEW_EMAC_RGMII=y
+-CONFIG_IBM_NEW_EMAC_EMAC4=y
+-CONFIG_NETDEV_1000=y
+-# CONFIG_ACENIC is not set
+-# CONFIG_DL2K is not set
+-# CONFIG_E1000 is not set
+-# CONFIG_E1000E is not set
+-# CONFIG_E1000E_ENABLED is not set
+-# CONFIG_IP1000 is not set
+-# CONFIG_IGB is not set
+-# CONFIG_NS83820 is not set
+-# CONFIG_HAMACHI is not set
+-# CONFIG_YELLOWFIN is not set
+-# CONFIG_R8169 is not set
+-# CONFIG_SIS190 is not set
+-# CONFIG_SKGE is not set
+-# CONFIG_SKY2 is not set
+-# CONFIG_SK98LIN is not set
+-# CONFIG_VIA_VELOCITY is not set
+-# CONFIG_TIGON3 is not set
+-# CONFIG_BNX2 is not set
+-# CONFIG_QLA3XXX is not set
+-# CONFIG_ATL1 is not set
+-CONFIG_NETDEV_10000=y
+-# CONFIG_CHELSIO_T1 is not set
+-# CONFIG_CHELSIO_T3 is not set
+-# CONFIG_IXGBE is not set
+-# CONFIG_IXGB is not set
+-# CONFIG_S2IO is not set
+-# CONFIG_MYRI10GE is not set
+-# CONFIG_NETXEN_NIC is not set
+-# CONFIG_NIU is not set
+-# CONFIG_MLX4_CORE is not set
+-# CONFIG_TEHUTI is not set
+-# CONFIG_BNX2X is not set
+-# CONFIG_TR is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-# CONFIG_WAN is not set
+-# CONFIG_FDDI is not set
+-# CONFIG_HIPPI is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-# CONFIG_INPUT is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-# CONFIG_NOZOMI is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-# CONFIG_SERIAL_8250_PCI is not set
+-CONFIG_SERIAL_8250_NR_UARTS=4
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-CONFIG_SERIAL_8250_EXTENDED=y
+-# CONFIG_SERIAL_8250_MANY_PORTS is not set
+-CONFIG_SERIAL_8250_SHARE_IRQ=y
+-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+-# CONFIG_SERIAL_8250_RSA is not set
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_JSM is not set
+-CONFIG_SERIAL_OF_PLATFORM=y
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-# CONFIG_HW_RANDOM is not set
+-# CONFIG_NVRAM is not set
+-# CONFIG_GEN_RTC is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_APPLICOM is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_DEVPORT=y
+-# CONFIG_I2C is not set
+-
+-#
+-# SPI support
+-#
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-# CONFIG_HWMON is not set
+-CONFIG_THERMAL=y
+-# CONFIG_WATCHDOG is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-CONFIG_DAB=y
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_AGP is not set
+-# CONFIG_DRM is not set
+-# CONFIG_VGASTATE is not set
+-CONFIG_VIDEO_OUTPUT_CONTROL=m
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-CONFIG_USB_SUPPORT=y
+-CONFIG_USB_ARCH_HAS_HCD=y
+-CONFIG_USB_ARCH_HAS_OHCI=y
+-CONFIG_USB_ARCH_HAS_EHCI=y
+-# CONFIG_USB is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_INFINIBAND is not set
+-# CONFIG_EDAC is not set
+-# CONFIG_RTC_CLASS is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-# CONFIG_EXT3_FS is not set
+-# CONFIG_EXT4DEV_FS is not set
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-# CONFIG_MSDOS_FS is not set
+-# CONFIG_VFAT_FS is not set
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-CONFIG_JFFS2_FS=y
+-CONFIG_JFFS2_FS_DEBUG=0
+-CONFIG_JFFS2_FS_WRITEBUFFER=y
+-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+-# CONFIG_JFFS2_SUMMARY is not set
+-# CONFIG_JFFS2_FS_XATTR is not set
+-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+-CONFIG_JFFS2_ZLIB=y
+-# CONFIG_JFFS2_LZO is not set
+-CONFIG_JFFS2_RTIME=y
+-# CONFIG_JFFS2_RUBIN is not set
+-CONFIG_CRAMFS=y
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-CONFIG_NFS_V3=y
+-# CONFIG_NFS_V3_ACL is not set
+-# CONFIG_NFS_V4 is not set
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_LOCKD_V4=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-# CONFIG_RPCSEC_GSS_KRB5 is not set
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-# CONFIG_PARTITION_ADVANCED is not set
+-CONFIG_MSDOS_PARTITION=y
+-# CONFIG_NLS is not set
+-# CONFIG_DLM is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_ZLIB_INFLATE=y
+-CONFIG_ZLIB_DEFLATE=y
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-CONFIG_MAGIC_SYSRQ=y
+-# CONFIG_UNUSED_SYMBOLS is not set
+-CONFIG_DEBUG_FS=y
+-# CONFIG_HEADERS_CHECK is not set
+-CONFIG_DEBUG_KERNEL=y
+-# CONFIG_DEBUG_SHIRQ is not set
+-CONFIG_DETECT_SOFTLOCKUP=y
+-CONFIG_SCHED_DEBUG=y
+-# CONFIG_SCHEDSTATS is not set
+-# CONFIG_TIMER_STATS is not set
+-# CONFIG_SLUB_DEBUG_ON is not set
+-# CONFIG_SLUB_STATS is not set
+-# CONFIG_DEBUG_RT_MUTEXES is not set
+-# CONFIG_RT_MUTEX_TESTER is not set
+-# CONFIG_DEBUG_SPINLOCK is not set
+-# CONFIG_DEBUG_MUTEXES is not set
+-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+-# CONFIG_DEBUG_KOBJECT is not set
+-# CONFIG_DEBUG_BUGVERBOSE is not set
+-# CONFIG_DEBUG_INFO is not set
+-# CONFIG_DEBUG_VM is not set
+-# CONFIG_DEBUG_LIST is not set
+-# CONFIG_DEBUG_SG is not set
+-# CONFIG_BOOT_PRINTK_DELAY is not set
+-# CONFIG_RCU_TORTURE_TEST is not set
+-# CONFIG_BACKTRACE_SELF_TEST is not set
+-# CONFIG_FAULT_INJECTION is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_DEBUG_STACKOVERFLOW is not set
+-# CONFIG_DEBUG_STACK_USAGE is not set
+-# CONFIG_DEBUG_PAGEALLOC is not set
+-CONFIG_DEBUGGER=y
+-# CONFIG_KGDB is not set
+-# CONFIG_XMON is not set
+-# CONFIG_VIRQ_DEBUG is not set
+-# CONFIG_BDI_SWITCH is not set
+-CONFIG_PPC_EARLY_DEBUG=y
+-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+-# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
+-# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
+-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+-# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
+-# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
+-CONFIG_PPC_EARLY_DEBUG_44x=y
+-# CONFIG_PPC_EARLY_DEBUG_40x is not set
+-# CONFIG_PPC_EARLY_DEBUG_CPM is not set
+-CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0xef600300
+-CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_BLKCIPHER=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-CONFIG_CRYPTO_MANAGER=y
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-CONFIG_CRYPTO_MD5=y
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-CONFIG_CRYPTO_ECB=y
+-CONFIG_CRYPTO_CBC=y
+-CONFIG_CRYPTO_PCBC=y
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-CONFIG_CRYPTO_DES=y
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_TEST is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+-# CONFIG_PPC_CLOCK is not set
+--- a/arch/powerpc/configs/sbc834x_defconfig
++++ /dev/null
+@@ -1,828 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc6
+-# Mon Mar 24 08:48:38 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-CONFIG_6xx=y
+-# CONFIG_PPC_85xx is not set
+-# CONFIG_PPC_8xx is not set
+-# CONFIG_40x is not set
+-# CONFIG_44x is not set
+-# CONFIG_E200 is not set
+-CONFIG_PPC_FPU=y
+-# CONFIG_FSL_EMB_PERFMON is not set
+-CONFIG_PPC_STD_MMU=y
+-CONFIG_PPC_STD_MMU_32=y
+-# CONFIG_PPC_MM_SLICES is not set
+-# CONFIG_SMP is not set
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-CONFIG_DEFAULT_UIMAGE=y
+-# CONFIG_PPC_DCR_NATIVE is not set
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-# CONFIG_POSIX_MQUEUE is not set
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-CONFIG_FAIR_GROUP_SCHED=y
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-CONFIG_SYSFS_DEPRECATED_V2=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-# CONFIG_KALLSYMS is not set
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-# CONFIG_EPOLL is not set
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLAB=y
+-# CONFIG_SLUB is not set
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_HAVE_KRETPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-CONFIG_MODULES=y
+-CONFIG_MODULE_UNLOAD=y
+-# CONFIG_MODULE_FORCE_UNLOAD is not set
+-# CONFIG_MODVERSIONS is not set
+-# CONFIG_MODULE_SRCVERSION_ALL is not set
+-# CONFIG_KMOD is not set
+-CONFIG_BLOCK=y
+-# CONFIG_LBD is not set
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MULTIPLATFORM is not set
+-# CONFIG_PPC_82xx is not set
+-CONFIG_PPC_83xx=y
+-# CONFIG_PPC_86xx is not set
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-CONFIG_MPC83xx=y
+-# CONFIG_MPC831x_RDB is not set
+-# CONFIG_MPC832x_MDS is not set
+-# CONFIG_MPC832x_RDB is not set
+-# CONFIG_MPC834x_MDS is not set
+-# CONFIG_MPC834x_ITX is not set
+-# CONFIG_MPC836x_MDS is not set
+-# CONFIG_MPC837x_MDS is not set
+-# CONFIG_MPC837x_RDB is not set
+-CONFIG_SBC834x=y
+-CONFIG_PPC_MPC834x=y
+-CONFIG_IPIC=y
+-# CONFIG_MPIC is not set
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-# CONFIG_FSL_ULI1575 is not set
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-# CONFIG_TICK_ONESHOT is not set
+-# CONFIG_NO_HZ is not set
+-# CONFIG_HIGH_RES_TIMERS is not set
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_BINFMT_ELF=y
+-# CONFIG_BINFMT_MISC is not set
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_RESOURCES_64BIT is not set
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-CONFIG_PROC_DEVICETREE=y
+-# CONFIG_CMDLINE_BOOL is not set
+-# CONFIG_PM is not set
+-CONFIG_SECCOMP=y
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_GENERIC_ISA_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_FSL_SOC=y
+-# CONFIG_PCI is not set
+-# CONFIG_PCI_DOMAINS is not set
+-# CONFIG_PCI_SYSCALL is not set
+-# CONFIG_ARCH_SUPPORTS_MSI is not set
+-# CONFIG_PCCARD is not set
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_BOOT_LOAD=0x00800000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-CONFIG_XFRM=y
+-CONFIG_XFRM_USER=m
+-# CONFIG_XFRM_SUB_POLICY is not set
+-# CONFIG_XFRM_MIGRATE is not set
+-# CONFIG_XFRM_STATISTICS is not set
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-CONFIG_IP_MULTICAST=y
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_IP_MROUTE is not set
+-# CONFIG_ARPD is not set
+-CONFIG_SYN_COOKIES=y
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-CONFIG_INET_XFRM_MODE_TRANSPORT=y
+-CONFIG_INET_XFRM_MODE_TUNNEL=y
+-CONFIG_INET_XFRM_MODE_BEET=y
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-# CONFIG_FW_LOADER is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-# CONFIG_CONNECTOR is not set
+-# CONFIG_MTD is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-CONFIG_BLK_DEV_LOOP=y
+-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=32768
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-# CONFIG_IDE is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-# CONFIG_SCSI is not set
+-# CONFIG_SCSI_DMA is not set
+-# CONFIG_SCSI_NETLINK is not set
+-# CONFIG_ATA is not set
+-# CONFIG_MD is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-CONFIG_PHYLIB=y
+-
+-#
+-# MII PHY device drivers
+-#
+-# CONFIG_MARVELL_PHY is not set
+-# CONFIG_DAVICOM_PHY is not set
+-# CONFIG_QSEMI_PHY is not set
+-# CONFIG_LXT_PHY is not set
+-# CONFIG_CICADA_PHY is not set
+-# CONFIG_VITESSE_PHY is not set
+-# CONFIG_SMSC_PHY is not set
+-CONFIG_BROADCOM_PHY=y
+-# CONFIG_ICPLUS_PHY is not set
+-# CONFIG_REALTEK_PHY is not set
+-# CONFIG_FIXED_PHY is not set
+-# CONFIG_MDIO_BITBANG is not set
+-CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
+-# CONFIG_IBM_NEW_EMAC_ZMII is not set
+-# CONFIG_IBM_NEW_EMAC_RGMII is not set
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-# CONFIG_B44 is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_E1000E_ENABLED is not set
+-CONFIG_GIANFAR=y
+-# CONFIG_GFAR_NAPI is not set
+-# CONFIG_NETDEV_10000 is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-# CONFIG_WAN is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-CONFIG_INPUT=y
+-# CONFIG_INPUT_FF_MEMLESS is not set
+-# CONFIG_INPUT_POLLDEV is not set
+-
+-#
+-# Userland interfaces
+-#
+-# CONFIG_INPUT_MOUSEDEV is not set
+-# CONFIG_INPUT_JOYDEV is not set
+-# CONFIG_INPUT_EVDEV is not set
+-# CONFIG_INPUT_EVBUG is not set
+-
+-#
+-# Input Device Drivers
+-#
+-# CONFIG_INPUT_KEYBOARD is not set
+-# CONFIG_INPUT_MOUSE is not set
+-# CONFIG_INPUT_JOYSTICK is not set
+-# CONFIG_INPUT_TABLET is not set
+-# CONFIG_INPUT_TOUCHSCREEN is not set
+-# CONFIG_INPUT_MISC is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-CONFIG_SERIAL_8250_NR_UARTS=4
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-# CONFIG_SERIAL_8250_EXTENDED is not set
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_OF_PLATFORM is not set
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-# CONFIG_HW_RANDOM is not set
+-# CONFIG_NVRAM is not set
+-CONFIG_GEN_RTC=y
+-# CONFIG_GEN_RTC_X is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_I2C=y
+-CONFIG_I2C_BOARDINFO=y
+-CONFIG_I2C_CHARDEV=y
+-
+-#
+-# I2C Algorithms
+-#
+-# CONFIG_I2C_ALGOBIT is not set
+-# CONFIG_I2C_ALGOPCF is not set
+-# CONFIG_I2C_ALGOPCA is not set
+-
+-#
+-# I2C Hardware Bus support
+-#
+-CONFIG_I2C_MPC=y
+-# CONFIG_I2C_OCORES is not set
+-# CONFIG_I2C_PARPORT_LIGHT is not set
+-# CONFIG_I2C_SIMTEC is not set
+-# CONFIG_I2C_TAOS_EVM is not set
+-# CONFIG_I2C_STUB is not set
+-
+-#
+-# Miscellaneous I2C Chip support
+-#
+-# CONFIG_DS1682 is not set
+-# CONFIG_SENSORS_EEPROM is not set
+-# CONFIG_SENSORS_PCF8574 is not set
+-# CONFIG_PCF8575 is not set
+-# CONFIG_SENSORS_PCF8591 is not set
+-# CONFIG_TPS65010 is not set
+-# CONFIG_SENSORS_MAX6875 is not set
+-# CONFIG_SENSORS_TSL2550 is not set
+-# CONFIG_I2C_DEBUG_CORE is not set
+-# CONFIG_I2C_DEBUG_ALGO is not set
+-# CONFIG_I2C_DEBUG_BUS is not set
+-# CONFIG_I2C_DEBUG_CHIP is not set
+-
+-#
+-# SPI support
+-#
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-CONFIG_HWMON=y
+-# CONFIG_HWMON_VID is not set
+-# CONFIG_SENSORS_AD7418 is not set
+-# CONFIG_SENSORS_ADM1021 is not set
+-# CONFIG_SENSORS_ADM1025 is not set
+-# CONFIG_SENSORS_ADM1026 is not set
+-# CONFIG_SENSORS_ADM1029 is not set
+-# CONFIG_SENSORS_ADM1031 is not set
+-# CONFIG_SENSORS_ADM9240 is not set
+-# CONFIG_SENSORS_ADT7470 is not set
+-# CONFIG_SENSORS_ADT7473 is not set
+-# CONFIG_SENSORS_ATXP1 is not set
+-# CONFIG_SENSORS_DS1621 is not set
+-# CONFIG_SENSORS_F71805F is not set
+-# CONFIG_SENSORS_F71882FG is not set
+-# CONFIG_SENSORS_F75375S is not set
+-# CONFIG_SENSORS_GL518SM is not set
+-# CONFIG_SENSORS_GL520SM is not set
+-# CONFIG_SENSORS_IT87 is not set
+-# CONFIG_SENSORS_LM63 is not set
+-# CONFIG_SENSORS_LM75 is not set
+-# CONFIG_SENSORS_LM77 is not set
+-# CONFIG_SENSORS_LM78 is not set
+-# CONFIG_SENSORS_LM80 is not set
+-# CONFIG_SENSORS_LM83 is not set
+-# CONFIG_SENSORS_LM85 is not set
+-# CONFIG_SENSORS_LM87 is not set
+-# CONFIG_SENSORS_LM90 is not set
+-# CONFIG_SENSORS_LM92 is not set
+-# CONFIG_SENSORS_LM93 is not set
+-# CONFIG_SENSORS_MAX1619 is not set
+-# CONFIG_SENSORS_MAX6650 is not set
+-# CONFIG_SENSORS_PC87360 is not set
+-# CONFIG_SENSORS_PC87427 is not set
+-# CONFIG_SENSORS_DME1737 is not set
+-# CONFIG_SENSORS_SMSC47M1 is not set
+-# CONFIG_SENSORS_SMSC47M192 is not set
+-# CONFIG_SENSORS_SMSC47B397 is not set
+-# CONFIG_SENSORS_ADS7828 is not set
+-# CONFIG_SENSORS_THMC50 is not set
+-# CONFIG_SENSORS_VT1211 is not set
+-# CONFIG_SENSORS_W83781D is not set
+-# CONFIG_SENSORS_W83791D is not set
+-# CONFIG_SENSORS_W83792D is not set
+-# CONFIG_SENSORS_W83793 is not set
+-# CONFIG_SENSORS_W83L785TS is not set
+-# CONFIG_SENSORS_W83L786NG is not set
+-# CONFIG_SENSORS_W83627HF is not set
+-# CONFIG_SENSORS_W83627EHF is not set
+-# CONFIG_HWMON_DEBUG_CHIP is not set
+-# CONFIG_THERMAL is not set
+-CONFIG_WATCHDOG=y
+-# CONFIG_WATCHDOG_NOWAYOUT is not set
+-
+-#
+-# Watchdog Device Drivers
+-#
+-# CONFIG_SOFT_WATCHDOG is not set
+-CONFIG_83xx_WDT=y
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-# CONFIG_DAB is not set
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_VGASTATE is not set
+-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-CONFIG_HID_SUPPORT=y
+-CONFIG_HID=y
+-# CONFIG_HID_DEBUG is not set
+-# CONFIG_HIDRAW is not set
+-# CONFIG_USB_SUPPORT is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_EDAC is not set
+-# CONFIG_RTC_CLASS is not set
+-# CONFIG_DMADEVICES is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-# CONFIG_EXT2_FS is not set
+-# CONFIG_EXT3_FS is not set
+-# CONFIG_EXT4DEV_FS is not set
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-# CONFIG_MSDOS_FS is not set
+-# CONFIG_VFAT_FS is not set
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-# CONFIG_CRAMFS is not set
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-CONFIG_NFS_V3=y
+-# CONFIG_NFS_V3_ACL is not set
+-CONFIG_NFS_V4=y
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_LOCKD_V4=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-CONFIG_SUNRPC_GSS=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-CONFIG_RPCSEC_GSS_KRB5=y
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-# CONFIG_PARTITION_ADVANCED is not set
+-CONFIG_MSDOS_PARTITION=y
+-# CONFIG_NLS is not set
+-# CONFIG_DLM is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-# CONFIG_MAGIC_SYSRQ is not set
+-# CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
+-# CONFIG_HEADERS_CHECK is not set
+-# CONFIG_DEBUG_KERNEL is not set
+-# CONFIG_DEBUG_BUGVERBOSE is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_PPC_EARLY_DEBUG is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_BLKCIPHER=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-CONFIG_CRYPTO_MANAGER=y
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-CONFIG_CRYPTO_MD5=y
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-CONFIG_CRYPTO_ECB=m
+-CONFIG_CRYPTO_CBC=y
+-CONFIG_CRYPTO_PCBC=m
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-CONFIG_CRYPTO_DES=y
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_TEST is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-# CONFIG_CRYPTO_HW is not set
+-# CONFIG_PPC_CLOCK is not set
+--- a/arch/powerpc/configs/sbc8548_defconfig
++++ /dev/null
+@@ -1,812 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc6
+-# Mon Mar 24 08:48:39 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-# CONFIG_6xx is not set
+-CONFIG_PPC_85xx=y
+-# CONFIG_PPC_8xx is not set
+-# CONFIG_40x is not set
+-# CONFIG_44x is not set
+-# CONFIG_E200 is not set
+-CONFIG_E500=y
+-CONFIG_BOOKE=y
+-CONFIG_FSL_BOOKE=y
+-CONFIG_FSL_EMB_PERFMON=y
+-# CONFIG_PHYS_64BIT is not set
+-CONFIG_SPE=y
+-# CONFIG_PPC_MM_SLICES is not set
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-CONFIG_DEFAULT_UIMAGE=y
+-# CONFIG_PPC_DCR_NATIVE is not set
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-# CONFIG_POSIX_MQUEUE is not set
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-CONFIG_FAIR_GROUP_SCHED=y
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-CONFIG_SYSFS_DEPRECATED_V2=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-CONFIG_KALLSYMS=y
+-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-CONFIG_EPOLL=y
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLAB=y
+-# CONFIG_SLUB is not set
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_HAVE_KRETPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-# CONFIG_MODULES is not set
+-CONFIG_BLOCK=y
+-# CONFIG_LBD is not set
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-CONFIG_MPC85xx=y
+-# CONFIG_MPC8540_ADS is not set
+-# CONFIG_MPC8560_ADS is not set
+-# CONFIG_MPC85xx_CDS is not set
+-# CONFIG_MPC85xx_MDS is not set
+-# CONFIG_MPC85xx_DS is not set
+-# CONFIG_STX_GP3 is not set
+-# CONFIG_TQM8540 is not set
+-# CONFIG_TQM8541 is not set
+-# CONFIG_TQM8555 is not set
+-# CONFIG_TQM8560 is not set
+-CONFIG_SBC8548=y
+-# CONFIG_SBC8560 is not set
+-# CONFIG_IPIC is not set
+-CONFIG_MPIC=y
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-# CONFIG_CPM2 is not set
+-# CONFIG_FSL_ULI1575 is not set
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-# CONFIG_TICK_ONESHOT is not set
+-# CONFIG_NO_HZ is not set
+-# CONFIG_HIGH_RES_TIMERS is not set
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_BINFMT_ELF=y
+-CONFIG_BINFMT_MISC=y
+-CONFIG_MATH_EMULATION=y
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_RESOURCES_64BIT is not set
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-CONFIG_PROC_DEVICETREE=y
+-# CONFIG_CMDLINE_BOOL is not set
+-# CONFIG_PM is not set
+-# CONFIG_SECCOMP is not set
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_FSL_SOC=y
+-CONFIG_FSL_PCI=y
+-CONFIG_PCI=y
+-CONFIG_PCI_DOMAINS=y
+-CONFIG_PCI_SYSCALL=y
+-# CONFIG_PCIEPORTBUS is not set
+-CONFIG_ARCH_SUPPORTS_MSI=y
+-# CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
+-# CONFIG_PCCARD is not set
+-# CONFIG_HOTPLUG_PCI is not set
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_BOOT_LOAD=0x00800000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-CONFIG_XFRM=y
+-CONFIG_XFRM_USER=y
+-# CONFIG_XFRM_SUB_POLICY is not set
+-# CONFIG_XFRM_MIGRATE is not set
+-# CONFIG_XFRM_STATISTICS is not set
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-CONFIG_IP_MULTICAST=y
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_IP_MROUTE is not set
+-# CONFIG_ARPD is not set
+-CONFIG_SYN_COOKIES=y
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-CONFIG_INET_XFRM_MODE_TRANSPORT=y
+-CONFIG_INET_XFRM_MODE_TUNNEL=y
+-CONFIG_INET_XFRM_MODE_BEET=y
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-# CONFIG_FW_LOADER is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-# CONFIG_CONNECTOR is not set
+-# CONFIG_MTD is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_CPQ_DA is not set
+-# CONFIG_BLK_CPQ_CISS_DA is not set
+-# CONFIG_BLK_DEV_DAC960 is not set
+-# CONFIG_BLK_DEV_UMEM is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-CONFIG_BLK_DEV_LOOP=y
+-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-# CONFIG_BLK_DEV_SX8 is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=4096
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_PHANTOM is not set
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_SGI_IOC4 is not set
+-# CONFIG_TIFM_CORE is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-# CONFIG_IDE is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-# CONFIG_SCSI is not set
+-# CONFIG_SCSI_DMA is not set
+-# CONFIG_SCSI_NETLINK is not set
+-# CONFIG_ATA is not set
+-# CONFIG_MD is not set
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-# CONFIG_FIREWIRE is not set
+-# CONFIG_IEEE1394 is not set
+-# CONFIG_I2O is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_ARCNET is not set
+-CONFIG_PHYLIB=y
+-
+-#
+-# MII PHY device drivers
+-#
+-# CONFIG_MARVELL_PHY is not set
+-# CONFIG_DAVICOM_PHY is not set
+-# CONFIG_QSEMI_PHY is not set
+-# CONFIG_LXT_PHY is not set
+-# CONFIG_CICADA_PHY is not set
+-# CONFIG_VITESSE_PHY is not set
+-# CONFIG_SMSC_PHY is not set
+-CONFIG_BROADCOM_PHY=y
+-# CONFIG_ICPLUS_PHY is not set
+-# CONFIG_REALTEK_PHY is not set
+-# CONFIG_FIXED_PHY is not set
+-# CONFIG_MDIO_BITBANG is not set
+-CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
+-# CONFIG_HAPPYMEAL is not set
+-# CONFIG_SUNGEM is not set
+-# CONFIG_CASSINI is not set
+-# CONFIG_NET_VENDOR_3COM is not set
+-# CONFIG_NET_TULIP is not set
+-# CONFIG_HP100 is not set
+-# CONFIG_IBM_NEW_EMAC_ZMII is not set
+-# CONFIG_IBM_NEW_EMAC_RGMII is not set
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-# CONFIG_NET_PCI is not set
+-# CONFIG_B44 is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_ACENIC is not set
+-# CONFIG_DL2K is not set
+-# CONFIG_E1000 is not set
+-# CONFIG_E1000E is not set
+-# CONFIG_E1000E_ENABLED is not set
+-# CONFIG_IP1000 is not set
+-# CONFIG_IGB is not set
+-# CONFIG_NS83820 is not set
+-# CONFIG_HAMACHI is not set
+-# CONFIG_YELLOWFIN is not set
+-# CONFIG_R8169 is not set
+-# CONFIG_SIS190 is not set
+-# CONFIG_SKGE is not set
+-# CONFIG_SKY2 is not set
+-# CONFIG_SK98LIN is not set
+-# CONFIG_VIA_VELOCITY is not set
+-# CONFIG_TIGON3 is not set
+-# CONFIG_BNX2 is not set
+-CONFIG_GIANFAR=y
+-CONFIG_GFAR_NAPI=y
+-# CONFIG_QLA3XXX is not set
+-# CONFIG_ATL1 is not set
+-CONFIG_NETDEV_10000=y
+-# CONFIG_CHELSIO_T1 is not set
+-# CONFIG_CHELSIO_T3 is not set
+-# CONFIG_IXGBE is not set
+-# CONFIG_IXGB is not set
+-# CONFIG_S2IO is not set
+-# CONFIG_MYRI10GE is not set
+-# CONFIG_NETXEN_NIC is not set
+-# CONFIG_NIU is not set
+-# CONFIG_MLX4_CORE is not set
+-# CONFIG_TEHUTI is not set
+-# CONFIG_BNX2X is not set
+-# CONFIG_TR is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-# CONFIG_WAN is not set
+-# CONFIG_FDDI is not set
+-# CONFIG_HIPPI is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-CONFIG_INPUT=y
+-# CONFIG_INPUT_FF_MEMLESS is not set
+-# CONFIG_INPUT_POLLDEV is not set
+-
+-#
+-# Userland interfaces
+-#
+-# CONFIG_INPUT_MOUSEDEV is not set
+-# CONFIG_INPUT_JOYDEV is not set
+-# CONFIG_INPUT_EVDEV is not set
+-# CONFIG_INPUT_EVBUG is not set
+-
+-#
+-# Input Device Drivers
+-#
+-# CONFIG_INPUT_KEYBOARD is not set
+-# CONFIG_INPUT_MOUSE is not set
+-# CONFIG_INPUT_JOYSTICK is not set
+-# CONFIG_INPUT_TABLET is not set
+-# CONFIG_INPUT_TOUCHSCREEN is not set
+-# CONFIG_INPUT_MISC is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-# CONFIG_NOZOMI is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-CONFIG_SERIAL_8250_PCI=y
+-CONFIG_SERIAL_8250_NR_UARTS=4
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-# CONFIG_SERIAL_8250_EXTENDED is not set
+-CONFIG_SERIAL_8250_SHARE_IRQ=y
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_JSM is not set
+-# CONFIG_SERIAL_OF_PLATFORM is not set
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-# CONFIG_HW_RANDOM is not set
+-# CONFIG_NVRAM is not set
+-CONFIG_GEN_RTC=y
+-# CONFIG_GEN_RTC_X is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_APPLICOM is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_DEVPORT=y
+-# CONFIG_I2C is not set
+-
+-#
+-# SPI support
+-#
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-CONFIG_HWMON=y
+-# CONFIG_HWMON_VID is not set
+-# CONFIG_SENSORS_I5K_AMB is not set
+-# CONFIG_SENSORS_F71805F is not set
+-# CONFIG_SENSORS_F71882FG is not set
+-# CONFIG_SENSORS_IT87 is not set
+-# CONFIG_SENSORS_PC87360 is not set
+-# CONFIG_SENSORS_PC87427 is not set
+-# CONFIG_SENSORS_SIS5595 is not set
+-# CONFIG_SENSORS_SMSC47M1 is not set
+-# CONFIG_SENSORS_SMSC47B397 is not set
+-# CONFIG_SENSORS_VIA686A is not set
+-# CONFIG_SENSORS_VT1211 is not set
+-# CONFIG_SENSORS_VT8231 is not set
+-# CONFIG_SENSORS_W83627HF is not set
+-# CONFIG_SENSORS_W83627EHF is not set
+-# CONFIG_HWMON_DEBUG_CHIP is not set
+-# CONFIG_THERMAL is not set
+-# CONFIG_WATCHDOG is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-CONFIG_DAB=y
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_AGP is not set
+-# CONFIG_DRM is not set
+-# CONFIG_VGASTATE is not set
+-CONFIG_VIDEO_OUTPUT_CONTROL=y
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-# CONFIG_HID_SUPPORT is not set
+-# CONFIG_USB_SUPPORT is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_INFINIBAND is not set
+-# CONFIG_EDAC is not set
+-# CONFIG_RTC_CLASS is not set
+-# CONFIG_DMADEVICES is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-# CONFIG_EXT2_FS is not set
+-# CONFIG_EXT3_FS is not set
+-# CONFIG_EXT4DEV_FS is not set
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-# CONFIG_MSDOS_FS is not set
+-# CONFIG_VFAT_FS is not set
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-# CONFIG_CRAMFS is not set
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-# CONFIG_NFS_V3 is not set
+-# CONFIG_NFS_V4 is not set
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-# CONFIG_RPCSEC_GSS_KRB5 is not set
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-# CONFIG_PARTITION_ADVANCED is not set
+-CONFIG_MSDOS_PARTITION=y
+-# CONFIG_NLS is not set
+-# CONFIG_DLM is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-# CONFIG_MAGIC_SYSRQ is not set
+-# CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
+-# CONFIG_HEADERS_CHECK is not set
+-# CONFIG_DEBUG_KERNEL is not set
+-# CONFIG_DEBUG_BUGVERBOSE is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_PPC_EARLY_DEBUG is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-# CONFIG_CRYPTO_MANAGER is not set
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-# CONFIG_CRYPTO_MD5 is not set
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-# CONFIG_CRYPTO_ECB is not set
+-# CONFIG_CRYPTO_CBC is not set
+-# CONFIG_CRYPTO_PCBC is not set
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-# CONFIG_CRYPTO_DES is not set
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+-# CONFIG_PPC_CLOCK is not set
+--- a/arch/powerpc/configs/sbc8560_defconfig
++++ /dev/null
+@@ -1,830 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc6
+-# Mon Mar 24 08:48:39 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-# CONFIG_6xx is not set
+-CONFIG_PPC_85xx=y
+-# CONFIG_PPC_8xx is not set
+-# CONFIG_40x is not set
+-# CONFIG_44x is not set
+-# CONFIG_E200 is not set
+-CONFIG_E500=y
+-CONFIG_BOOKE=y
+-CONFIG_FSL_BOOKE=y
+-CONFIG_FSL_EMB_PERFMON=y
+-# CONFIG_PHYS_64BIT is not set
+-CONFIG_SPE=y
+-# CONFIG_PPC_MM_SLICES is not set
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-CONFIG_DEFAULT_UIMAGE=y
+-# CONFIG_PPC_DCR_NATIVE is not set
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-# CONFIG_POSIX_MQUEUE is not set
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-CONFIG_FAIR_GROUP_SCHED=y
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-CONFIG_SYSFS_DEPRECATED_V2=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-CONFIG_KALLSYMS=y
+-# CONFIG_KALLSYMS_ALL is not set
+-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-CONFIG_EPOLL=y
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLAB=y
+-# CONFIG_SLUB is not set
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_HAVE_KRETPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-# CONFIG_MODULES is not set
+-CONFIG_BLOCK=y
+-# CONFIG_LBD is not set
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-CONFIG_MPC85xx=y
+-# CONFIG_MPC8540_ADS is not set
+-# CONFIG_MPC8560_ADS is not set
+-# CONFIG_MPC85xx_CDS is not set
+-# CONFIG_MPC85xx_MDS is not set
+-# CONFIG_MPC85xx_DS is not set
+-# CONFIG_STX_GP3 is not set
+-# CONFIG_TQM8540 is not set
+-# CONFIG_TQM8541 is not set
+-# CONFIG_TQM8555 is not set
+-# CONFIG_TQM8560 is not set
+-# CONFIG_SBC8548 is not set
+-CONFIG_SBC8560=y
+-# CONFIG_IPIC is not set
+-CONFIG_MPIC=y
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-# CONFIG_CPM2 is not set
+-# CONFIG_FSL_ULI1575 is not set
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-# CONFIG_TICK_ONESHOT is not set
+-# CONFIG_NO_HZ is not set
+-# CONFIG_HIGH_RES_TIMERS is not set
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_BINFMT_ELF=y
+-CONFIG_BINFMT_MISC=y
+-# CONFIG_MATH_EMULATION is not set
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_RESOURCES_64BIT is not set
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-CONFIG_PROC_DEVICETREE=y
+-# CONFIG_CMDLINE_BOOL is not set
+-# CONFIG_PM is not set
+-# CONFIG_SECCOMP is not set
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_FSL_SOC=y
+-# CONFIG_PCI is not set
+-# CONFIG_PCI_DOMAINS is not set
+-# CONFIG_PCI_SYSCALL is not set
+-# CONFIG_ARCH_SUPPORTS_MSI is not set
+-# CONFIG_PCCARD is not set
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_BOOT_LOAD=0x00800000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-CONFIG_XFRM=y
+-CONFIG_XFRM_USER=y
+-# CONFIG_XFRM_SUB_POLICY is not set
+-# CONFIG_XFRM_MIGRATE is not set
+-# CONFIG_XFRM_STATISTICS is not set
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-CONFIG_IP_MULTICAST=y
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_IP_MROUTE is not set
+-# CONFIG_ARPD is not set
+-CONFIG_SYN_COOKIES=y
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-CONFIG_INET_XFRM_MODE_TRANSPORT=y
+-CONFIG_INET_XFRM_MODE_TUNNEL=y
+-CONFIG_INET_XFRM_MODE_BEET=y
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-# CONFIG_FW_LOADER is not set
+-# CONFIG_DEBUG_DRIVER is not set
+-# CONFIG_DEBUG_DEVRES is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-# CONFIG_CONNECTOR is not set
+-# CONFIG_MTD is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-CONFIG_BLK_DEV_LOOP=y
+-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=32768
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-# CONFIG_IDE is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-# CONFIG_SCSI is not set
+-# CONFIG_SCSI_DMA is not set
+-# CONFIG_SCSI_NETLINK is not set
+-# CONFIG_ATA is not set
+-# CONFIG_MD is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-CONFIG_PHYLIB=y
+-
+-#
+-# MII PHY device drivers
+-#
+-# CONFIG_MARVELL_PHY is not set
+-# CONFIG_DAVICOM_PHY is not set
+-# CONFIG_QSEMI_PHY is not set
+-# CONFIG_LXT_PHY is not set
+-# CONFIG_CICADA_PHY is not set
+-# CONFIG_VITESSE_PHY is not set
+-# CONFIG_SMSC_PHY is not set
+-CONFIG_BROADCOM_PHY=y
+-# CONFIG_ICPLUS_PHY is not set
+-# CONFIG_REALTEK_PHY is not set
+-# CONFIG_FIXED_PHY is not set
+-# CONFIG_MDIO_BITBANG is not set
+-CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
+-# CONFIG_IBM_NEW_EMAC_ZMII is not set
+-# CONFIG_IBM_NEW_EMAC_RGMII is not set
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-# CONFIG_B44 is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_E1000E_ENABLED is not set
+-CONFIG_GIANFAR=y
+-CONFIG_GFAR_NAPI=y
+-CONFIG_NETDEV_10000=y
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-# CONFIG_WAN is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-CONFIG_INPUT=y
+-# CONFIG_INPUT_FF_MEMLESS is not set
+-# CONFIG_INPUT_POLLDEV is not set
+-
+-#
+-# Userland interfaces
+-#
+-# CONFIG_INPUT_MOUSEDEV is not set
+-# CONFIG_INPUT_JOYDEV is not set
+-# CONFIG_INPUT_EVDEV is not set
+-# CONFIG_INPUT_EVBUG is not set
+-
+-#
+-# Input Device Drivers
+-#
+-# CONFIG_INPUT_KEYBOARD is not set
+-# CONFIG_INPUT_MOUSE is not set
+-# CONFIG_INPUT_JOYSTICK is not set
+-# CONFIG_INPUT_TABLET is not set
+-# CONFIG_INPUT_TOUCHSCREEN is not set
+-# CONFIG_INPUT_MISC is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-CONFIG_SERIAL_8250_NR_UARTS=2
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+-# CONFIG_SERIAL_8250_EXTENDED is not set
+-CONFIG_SERIAL_8250_SHARE_IRQ=y
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_OF_PLATFORM is not set
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-# CONFIG_HW_RANDOM is not set
+-# CONFIG_NVRAM is not set
+-# CONFIG_GEN_RTC is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-# CONFIG_I2C is not set
+-
+-#
+-# SPI support
+-#
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-CONFIG_HWMON=y
+-# CONFIG_HWMON_VID is not set
+-# CONFIG_SENSORS_F71805F is not set
+-# CONFIG_SENSORS_F71882FG is not set
+-# CONFIG_SENSORS_IT87 is not set
+-# CONFIG_SENSORS_PC87360 is not set
+-# CONFIG_SENSORS_PC87427 is not set
+-# CONFIG_SENSORS_SMSC47M1 is not set
+-# CONFIG_SENSORS_SMSC47B397 is not set
+-# CONFIG_SENSORS_VT1211 is not set
+-# CONFIG_SENSORS_W83627HF is not set
+-# CONFIG_SENSORS_W83627EHF is not set
+-# CONFIG_HWMON_DEBUG_CHIP is not set
+-# CONFIG_THERMAL is not set
+-# CONFIG_WATCHDOG is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-CONFIG_DAB=y
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_VGASTATE is not set
+-CONFIG_VIDEO_OUTPUT_CONTROL=y
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-CONFIG_HID_SUPPORT=y
+-CONFIG_HID=y
+-# CONFIG_HID_DEBUG is not set
+-# CONFIG_HIDRAW is not set
+-CONFIG_USB_SUPPORT=y
+-# CONFIG_USB_ARCH_HAS_HCD is not set
+-# CONFIG_USB_ARCH_HAS_OHCI is not set
+-# CONFIG_USB_ARCH_HAS_EHCI is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_EDAC is not set
+-CONFIG_RTC_LIB=y
+-CONFIG_RTC_CLASS=y
+-CONFIG_RTC_HCTOSYS=y
+-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+-# CONFIG_RTC_DEBUG is not set
+-
+-#
+-# RTC interfaces
+-#
+-CONFIG_RTC_INTF_SYSFS=y
+-CONFIG_RTC_INTF_PROC=y
+-CONFIG_RTC_INTF_DEV=y
+-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+-# CONFIG_RTC_DRV_TEST is not set
+-
+-#
+-# SPI RTC drivers
+-#
+-
+-#
+-# Platform RTC drivers
+-#
+-# CONFIG_RTC_DRV_CMOS is not set
+-# CONFIG_RTC_DRV_DS1511 is not set
+-# CONFIG_RTC_DRV_DS1553 is not set
+-# CONFIG_RTC_DRV_DS1742 is not set
+-# CONFIG_RTC_DRV_STK17TA8 is not set
+-# CONFIG_RTC_DRV_M48T86 is not set
+-CONFIG_RTC_DRV_M48T59=y
+-# CONFIG_RTC_DRV_V3020 is not set
+-
+-#
+-# on-CPU RTC drivers
+-#
+-# CONFIG_DMADEVICES is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-# CONFIG_EXT2_FS is not set
+-# CONFIG_EXT3_FS is not set
+-# CONFIG_EXT4DEV_FS is not set
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-# CONFIG_MSDOS_FS is not set
+-# CONFIG_VFAT_FS is not set
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-# CONFIG_CRAMFS is not set
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-# CONFIG_NFS_V3 is not set
+-# CONFIG_NFS_V4 is not set
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-# CONFIG_RPCSEC_GSS_KRB5 is not set
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-CONFIG_PARTITION_ADVANCED=y
+-# CONFIG_ACORN_PARTITION is not set
+-# CONFIG_OSF_PARTITION is not set
+-# CONFIG_AMIGA_PARTITION is not set
+-# CONFIG_ATARI_PARTITION is not set
+-# CONFIG_MAC_PARTITION is not set
+-# CONFIG_MSDOS_PARTITION is not set
+-# CONFIG_LDM_PARTITION is not set
+-# CONFIG_SGI_PARTITION is not set
+-# CONFIG_ULTRIX_PARTITION is not set
+-# CONFIG_SUN_PARTITION is not set
+-# CONFIG_KARMA_PARTITION is not set
+-# CONFIG_EFI_PARTITION is not set
+-# CONFIG_SYSV68_PARTITION is not set
+-# CONFIG_NLS is not set
+-# CONFIG_DLM is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-CONFIG_MAGIC_SYSRQ=y
+-# CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
+-# CONFIG_HEADERS_CHECK is not set
+-CONFIG_DEBUG_KERNEL=y
+-# CONFIG_DEBUG_SHIRQ is not set
+-CONFIG_DETECT_SOFTLOCKUP=y
+-CONFIG_SCHED_DEBUG=y
+-# CONFIG_SCHEDSTATS is not set
+-# CONFIG_TIMER_STATS is not set
+-# CONFIG_DEBUG_SLAB is not set
+-# CONFIG_DEBUG_RT_MUTEXES is not set
+-# CONFIG_RT_MUTEX_TESTER is not set
+-# CONFIG_DEBUG_SPINLOCK is not set
+-CONFIG_DEBUG_MUTEXES=y
+-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+-# CONFIG_DEBUG_KOBJECT is not set
+-# CONFIG_DEBUG_BUGVERBOSE is not set
+-# CONFIG_DEBUG_INFO is not set
+-# CONFIG_DEBUG_VM is not set
+-# CONFIG_DEBUG_LIST is not set
+-# CONFIG_DEBUG_SG is not set
+-# CONFIG_BOOT_PRINTK_DELAY is not set
+-# CONFIG_BACKTRACE_SELF_TEST is not set
+-# CONFIG_FAULT_INJECTION is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_DEBUG_STACKOVERFLOW is not set
+-# CONFIG_DEBUG_STACK_USAGE is not set
+-# CONFIG_DEBUG_PAGEALLOC is not set
+-# CONFIG_DEBUGGER is not set
+-# CONFIG_BDI_SWITCH is not set
+-CONFIG_PPC_EARLY_DEBUG=y
+-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+-# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
+-# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
+-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+-# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
+-# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
+-# CONFIG_PPC_EARLY_DEBUG_44x is not set
+-# CONFIG_PPC_EARLY_DEBUG_40x is not set
+-# CONFIG_PPC_EARLY_DEBUG_CPM is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-# CONFIG_CRYPTO_MANAGER is not set
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-# CONFIG_CRYPTO_MD5 is not set
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-# CONFIG_CRYPTO_ECB is not set
+-# CONFIG_CRYPTO_CBC is not set
+-# CONFIG_CRYPTO_PCBC is not set
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-# CONFIG_CRYPTO_DES is not set
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_PPC_CLOCK is not set
+--- /dev/null
++++ b/arch/powerpc/configs/sbc8641d_defconfig
+@@ -0,0 +1,1342 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.25-rc6
++# Thu Apr 10 18:03:25 2008
++#
++# CONFIG_PPC64 is not set
++
++#
++# Processor support
++#
++CONFIG_6xx=y
++# CONFIG_PPC_85xx is not set
++# CONFIG_PPC_8xx is not set
++# CONFIG_40x is not set
++# CONFIG_44x is not set
++# CONFIG_E200 is not set
++CONFIG_PPC_FPU=y
++CONFIG_ALTIVEC=y
++CONFIG_PPC_STD_MMU=y
++CONFIG_PPC_STD_MMU_32=y
++# CONFIG_PPC_MM_SLICES is not set
++CONFIG_SMP=y
++CONFIG_NR_CPUS=2
++CONFIG_PPC32=y
++CONFIG_WORD_SIZE=32
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_CMOS_UPDATE=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_TIME_VSYSCALL=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_GENERIC_HARDIRQS=y
++# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_GENERIC_LOCKBREAK=y
++CONFIG_ARCH_HAS_ILOG2_U32=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_OF=y
++CONFIG_PPC_UDBG_16550=y
++CONFIG_GENERIC_TBSYNC=y
++CONFIG_AUDIT_ARCH=y
++CONFIG_GENERIC_BUG=y
++CONFIG_DEFAULT_UIMAGE=y
++# CONFIG_PPC_DCR_NATIVE is not set
++# CONFIG_PPC_DCR_MMIO is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_LOCK_KERNEL=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_BSD_PROCESS_ACCT=y
++CONFIG_BSD_PROCESS_ACCT_V3=y
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++# CONFIG_CGROUPS is not set
++CONFIG_GROUP_SCHED=y
++CONFIG_FAIR_GROUP_SCHED=y
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++CONFIG_RELAY=y
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++CONFIG_STOP_MACHINE=y
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++# CONFIG_BLK_DEV_BSG is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
++CONFIG_CLASSIC_RCU=y
++
++#
++# Platform support
++#
++# CONFIG_PPC_MULTIPLATFORM is not set
++# CONFIG_PPC_82xx is not set
++# CONFIG_PPC_83xx is not set
++CONFIG_PPC_86xx=y
++# CONFIG_PPC_MPC512x is not set
++# CONFIG_PPC_MPC5121 is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PQ2ADS is not set
++# CONFIG_MPC8641_HPCN is not set
++CONFIG_SBC8641D=y
++# CONFIG_MPC8610_HPCD is not set
++CONFIG_MPC8641=y
++# CONFIG_IPIC is not set
++CONFIG_MPIC=y
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_PPC_INDIRECT_IO is not set
++# CONFIG_GENERIC_IOMAP is not set
++# CONFIG_CPU_FREQ is not set
++# CONFIG_FSL_ULI1575 is not set
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++CONFIG_TICK_ONESHOT=y
++# CONFIG_NO_HZ is not set
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++# CONFIG_HZ_100 is not set
++CONFIG_HZ_250=y
++# CONFIG_HZ_300 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=250
++# CONFIG_SCHED_HRTICK is not set
++# CONFIG_PREEMPT_NONE is not set
++# CONFIG_PREEMPT_VOLUNTARY is not set
++CONFIG_PREEMPT=y
++# CONFIG_PREEMPT_RCU is not set
++CONFIG_BINFMT_ELF=y
++CONFIG_BINFMT_MISC=m
++CONFIG_FORCE_MAX_ZONEORDER=11
++# CONFIG_IOMMU_HELPER is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_HAS_WALK_MEMORY=y
++CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
++CONFIG_IRQ_ALL_CPUS=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=1
++CONFIG_BOUNCE=y
++CONFIG_VIRT_TO_BUS=y
++# CONFIG_PROC_DEVICETREE is not set
++# CONFIG_CMDLINE_BOOL is not set
++# CONFIG_PM is not set
++CONFIG_SECCOMP=y
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_ZONE_DMA=y
++CONFIG_GENERIC_ISA_DMA=y
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_FSL_SOC=y
++CONFIG_FSL_PCI=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++CONFIG_PCI_SYSCALL=y
++CONFIG_PCIEPORTBUS=y
++CONFIG_PCIEAER=y
++CONFIG_ARCH_SUPPORTS_MSI=y
++# CONFIG_PCI_MSI is not set
++CONFIG_PCI_LEGACY=y
++# CONFIG_PCI_DEBUG is not set
++# CONFIG_PCCARD is not set
++# CONFIG_HOTPLUG_PCI is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0xc0000000
++CONFIG_BOOT_LOAD=0x00800000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++CONFIG_XFRM_USER=m
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++CONFIG_NET_KEY=m
++# CONFIG_NET_KEY_MIGRATE is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_IP_ADVANCED_ROUTER=y
++CONFIG_ASK_IP_FIB_HASH=y
++# CONFIG_IP_FIB_TRIE is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_MULTIPLE_TABLES=y
++CONFIG_IP_ROUTE_MULTIPATH=y
++CONFIG_IP_ROUTE_VERBOSE=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++CONFIG_IP_PNP_RARP=y
++CONFIG_NET_IPIP=m
++CONFIG_NET_IPGRE=m
++CONFIG_NET_IPGRE_BROADCAST=y
++CONFIG_IP_MROUTE=y
++CONFIG_IP_PIMSM_V1=y
++CONFIG_IP_PIMSM_V2=y
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++CONFIG_INET_AH=m
++CONFIG_INET_ESP=m
++CONFIG_INET_IPCOMP=m
++CONFIG_INET_XFRM_TUNNEL=m
++CONFIG_INET_TUNNEL=m
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IP_VS is not set
++CONFIG_IPV6=m
++# CONFIG_IPV6_PRIVACY is not set
++# CONFIG_IPV6_ROUTER_PREF is not set
++# CONFIG_IPV6_OPTIMISTIC_DAD is not set
++CONFIG_INET6_AH=m
++CONFIG_INET6_ESP=m
++CONFIG_INET6_IPCOMP=m
++# CONFIG_IPV6_MIP6 is not set
++CONFIG_INET6_XFRM_TUNNEL=m
++CONFIG_INET6_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_TRANSPORT=m
++CONFIG_INET6_XFRM_MODE_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_BEET=m
++# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
++CONFIG_IPV6_SIT=m
++CONFIG_IPV6_TUNNEL=m
++# CONFIG_IPV6_MULTIPLE_TABLES is not set
++# CONFIG_NETLABEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++CONFIG_NETFILTER=y
++# CONFIG_NETFILTER_DEBUG is not set
++CONFIG_NETFILTER_ADVANCED=y
++CONFIG_BRIDGE_NETFILTER=y
++
++#
++# Core Netfilter Configuration
++#
++# CONFIG_NETFILTER_NETLINK_QUEUE is not set
++# CONFIG_NETFILTER_NETLINK_LOG is not set
++# CONFIG_NF_CONNTRACK is not set
++CONFIG_NETFILTER_XTABLES=m
++# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
++# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
++# CONFIG_NETFILTER_XT_TARGET_MARK is not set
++# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
++# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
++# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
++# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
++# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
++# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
++# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
++# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
++# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
++# CONFIG_NETFILTER_XT_MATCH_ESP is not set
++# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
++# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
++# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
++# CONFIG_NETFILTER_XT_MATCH_MAC is not set
++# CONFIG_NETFILTER_XT_MATCH_MARK is not set
++# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
++# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
++# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
++# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
++# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
++# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
++# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
++# CONFIG_NETFILTER_XT_MATCH_REALM is not set
++# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
++# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
++# CONFIG_NETFILTER_XT_MATCH_STRING is not set
++# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
++# CONFIG_NETFILTER_XT_MATCH_TIME is not set
++# CONFIG_NETFILTER_XT_MATCH_U32 is not set
++# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
++
++#
++# IP: Netfilter Configuration
++#
++CONFIG_IP_NF_QUEUE=m
++CONFIG_IP_NF_IPTABLES=m
++CONFIG_IP_NF_MATCH_RECENT=m
++CONFIG_IP_NF_MATCH_ECN=m
++# CONFIG_IP_NF_MATCH_AH is not set
++CONFIG_IP_NF_MATCH_TTL=m
++CONFIG_IP_NF_MATCH_ADDRTYPE=m
++CONFIG_IP_NF_FILTER=m
++CONFIG_IP_NF_TARGET_REJECT=m
++CONFIG_IP_NF_TARGET_LOG=m
++CONFIG_IP_NF_TARGET_ULOG=m
++CONFIG_IP_NF_MANGLE=m
++CONFIG_IP_NF_TARGET_ECN=m
++# CONFIG_IP_NF_TARGET_TTL is not set
++CONFIG_IP_NF_RAW=m
++CONFIG_IP_NF_ARPTABLES=m
++CONFIG_IP_NF_ARPFILTER=m
++CONFIG_IP_NF_ARP_MANGLE=m
++
++#
++# IPv6: Netfilter Configuration
++#
++CONFIG_IP6_NF_QUEUE=m
++CONFIG_IP6_NF_IPTABLES=m
++CONFIG_IP6_NF_MATCH_RT=m
++CONFIG_IP6_NF_MATCH_OPTS=m
++CONFIG_IP6_NF_MATCH_FRAG=m
++CONFIG_IP6_NF_MATCH_HL=m
++CONFIG_IP6_NF_MATCH_IPV6HEADER=m
++# CONFIG_IP6_NF_MATCH_AH is not set
++# CONFIG_IP6_NF_MATCH_MH is not set
++CONFIG_IP6_NF_MATCH_EUI64=m
++CONFIG_IP6_NF_FILTER=m
++CONFIG_IP6_NF_TARGET_LOG=m
++# CONFIG_IP6_NF_TARGET_REJECT is not set
++CONFIG_IP6_NF_MANGLE=m
++# CONFIG_IP6_NF_TARGET_HL is not set
++CONFIG_IP6_NF_RAW=m
++
++#
++# Bridge: Netfilter Configuration
++#
++# CONFIG_BRIDGE_NF_EBTABLES is not set
++# CONFIG_IP_DCCP is not set
++CONFIG_IP_SCTP=m
++# CONFIG_SCTP_DBG_MSG is not set
++# CONFIG_SCTP_DBG_OBJCNT is not set
++# CONFIG_SCTP_HMAC_NONE is not set
++# CONFIG_SCTP_HMAC_SHA1 is not set
++CONFIG_SCTP_HMAC_MD5=y
++CONFIG_TIPC=m
++# CONFIG_TIPC_ADVANCED is not set
++# CONFIG_TIPC_DEBUG is not set
++CONFIG_ATM=m
++CONFIG_ATM_CLIP=m
++# CONFIG_ATM_CLIP_NO_ICMP is not set
++CONFIG_ATM_LANE=m
++CONFIG_ATM_MPOA=m
++CONFIG_ATM_BR2684=m
++# CONFIG_ATM_BR2684_IPFILTER is not set
++CONFIG_BRIDGE=m
++CONFIG_VLAN_8021Q=m
++# CONFIG_DECNET is not set
++CONFIG_LLC=m
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++CONFIG_WAN_ROUTER=m
++CONFIG_NET_SCHED=y
++
++#
++# Queueing/Scheduling
++#
++CONFIG_NET_SCH_CBQ=m
++CONFIG_NET_SCH_HTB=m
++CONFIG_NET_SCH_HFSC=m
++CONFIG_NET_SCH_ATM=m
++CONFIG_NET_SCH_PRIO=m
++# CONFIG_NET_SCH_RR is not set
++CONFIG_NET_SCH_RED=m
++CONFIG_NET_SCH_SFQ=m
++CONFIG_NET_SCH_TEQL=m
++CONFIG_NET_SCH_TBF=m
++CONFIG_NET_SCH_GRED=m
++CONFIG_NET_SCH_DSMARK=m
++CONFIG_NET_SCH_NETEM=m
++
++#
++# Classification
++#
++CONFIG_NET_CLS=y
++# CONFIG_NET_CLS_BASIC is not set
++CONFIG_NET_CLS_TCINDEX=m
++CONFIG_NET_CLS_ROUTE4=m
++CONFIG_NET_CLS_ROUTE=y
++CONFIG_NET_CLS_FW=m
++CONFIG_NET_CLS_U32=m
++# CONFIG_CLS_U32_PERF is not set
++# CONFIG_CLS_U32_MARK is not set
++CONFIG_NET_CLS_RSVP=m
++CONFIG_NET_CLS_RSVP6=m
++# CONFIG_NET_CLS_FLOW is not set
++# CONFIG_NET_EMATCH is not set
++# CONFIG_NET_CLS_ACT is not set
++# CONFIG_NET_CLS_IND is not set
++CONFIG_NET_SCH_FIFO=y
++
++#
++# Network testing
++#
++CONFIG_NET_PKTGEN=m
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++CONFIG_FIB_RULES=y
++
++#
++# Wireless
++#
++# CONFIG_CFG80211 is not set
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_IEEE80211 is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_FW_LOADER is not set
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++CONFIG_MTD_CONCAT=y
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++# CONFIG_MTD_CMDLINE_PARTS is not set
++# CONFIG_MTD_OF_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++CONFIG_MTD_CFI_ADV_OPTIONS=y
++# CONFIG_MTD_CFI_NOSWAP is not set
++# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
++CONFIG_MTD_CFI_LE_BYTE_SWAP=y
++# CONFIG_MTD_CFI_GEOMETRY is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_OTP is not set
++CONFIG_MTD_CFI_INTELEXT=y
++# CONFIG_MTD_CFI_AMDSTD is not set
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PHYSMAP is not set
++CONFIG_MTD_PHYSMAP_OF=y
++# CONFIG_MTD_INTEL_VR_NOR is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_PMC551 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++# CONFIG_MTD_NAND is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++CONFIG_OF_DEVICE=y
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=m
++CONFIG_BLK_DEV_CRYPTOLOOP=m
++CONFIG_BLK_DEV_NBD=m
++# CONFIG_BLK_DEV_SX8 is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=4096
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_PHANTOM is not set
++# CONFIG_EEPROM_93CX6 is not set
++# CONFIG_SGI_IOC4 is not set
++# CONFIG_TIFM_CORE is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++CONFIG_MD=y
++CONFIG_BLK_DEV_MD=y
++CONFIG_MD_LINEAR=y
++CONFIG_MD_RAID0=y
++CONFIG_MD_RAID1=y
++CONFIG_MD_RAID10=y
++# CONFIG_MD_RAID456 is not set
++CONFIG_MD_MULTIPATH=y
++CONFIG_MD_FAULTY=y
++CONFIG_BLK_DEV_DM=y
++# CONFIG_DM_DEBUG is not set
++CONFIG_DM_CRYPT=y
++CONFIG_DM_SNAPSHOT=y
++CONFIG_DM_MIRROR=y
++CONFIG_DM_ZERO=y
++# CONFIG_DM_MULTIPATH is not set
++# CONFIG_DM_DELAY is not set
++# CONFIG_DM_UEVENT is not set
++# CONFIG_FUSION is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_FIREWIRE is not set
++# CONFIG_IEEE1394 is not set
++# CONFIG_I2O is not set
++# CONFIG_MACINTOSH_DRIVERS is not set
++CONFIG_NETDEVICES=y
++# CONFIG_NETDEVICES_MULTIQUEUE is not set
++CONFIG_DUMMY=m
++CONFIG_BONDING=m
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++CONFIG_TUN=m
++# CONFIG_VETH is not set
++# CONFIG_ARCNET is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++# CONFIG_SMSC_PHY is not set
++CONFIG_BROADCOM_PHY=y
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_HAPPYMEAL is not set
++# CONFIG_SUNGEM is not set
++# CONFIG_CASSINI is not set
++# CONFIG_NET_VENDOR_3COM is not set
++# CONFIG_NET_TULIP is not set
++# CONFIG_HP100 is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_NET_PCI is not set
++# CONFIG_B44 is not set
++CONFIG_NETDEV_1000=y
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++# CONFIG_E1000 is not set
++# CONFIG_E1000E is not set
++# CONFIG_E1000E_ENABLED is not set
++# CONFIG_IP1000 is not set
++# CONFIG_IGB is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++# CONFIG_R8169 is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_VIA_VELOCITY is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++CONFIG_GIANFAR=y
++# CONFIG_GFAR_NAPI is not set
++# CONFIG_QLA3XXX is not set
++# CONFIG_ATL1 is not set
++# CONFIG_NETDEV_10000 is not set
++# CONFIG_TR is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_WAN is not set
++CONFIG_ATM_DRIVERS=y
++# CONFIG_ATM_DUMMY is not set
++# CONFIG_ATM_TCP is not set
++# CONFIG_ATM_LANAI is not set
++# CONFIG_ATM_ENI is not set
++# CONFIG_ATM_FIRESTREAM is not set
++# CONFIG_ATM_ZATM is not set
++# CONFIG_ATM_NICSTAR is not set
++# CONFIG_ATM_IDT77252 is not set
++# CONFIG_ATM_AMBASSADOR is not set
++# CONFIG_ATM_HORIZON is not set
++# CONFIG_ATM_IA is not set
++# CONFIG_ATM_FORE200E_MAYBE is not set
++# CONFIG_ATM_HE is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++CONFIG_PPP=m
++CONFIG_PPP_MULTILINK=y
++CONFIG_PPP_FILTER=y
++CONFIG_PPP_ASYNC=m
++CONFIG_PPP_SYNC_TTY=m
++CONFIG_PPP_DEFLATE=m
++CONFIG_PPP_BSDCOMP=m
++# CONFIG_PPP_MPPE is not set
++CONFIG_PPPOE=m
++CONFIG_PPPOATM=m
++# CONFIG_PPPOL2TP is not set
++CONFIG_SLIP=m
++CONFIG_SLIP_COMPRESSED=y
++CONFIG_SLHC=m
++CONFIG_SLIP_SMART=y
++CONFIG_SLIP_MODE_SLIP6=y
++CONFIG_NETCONSOLE=y
++# CONFIG_NETCONSOLE_DYNAMIC is not set
++CONFIG_NETPOLL=y
++CONFIG_NETPOLL_TRAP=y
++CONFIG_NET_POLL_CONTROLLER=y
++# CONFIG_ISDN is not set
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
++CONFIG_INPUT_MOUSEDEV_PSAUX=y
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++# CONFIG_NOZOMI is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++# CONFIG_SERIAL_8250_PCI is not set
++CONFIG_SERIAL_8250_NR_UARTS=2
++CONFIG_SERIAL_8250_RUNTIME_UARTS=2
++# CONFIG_SERIAL_8250_EXTENDED is not set
++
++#
++# Non-8250 serial port support
++#
++# CONFIG_SERIAL_UARTLITE is not set
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_JSM is not set
++# CONFIG_SERIAL_OF_PLATFORM is not set
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++# CONFIG_IPMI_HANDLER is not set
++CONFIG_HW_RANDOM=m
++# CONFIG_NVRAM is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_DEVPORT=y
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=y
++
++#
++# I2C Algorithms
++#
++# CONFIG_I2C_ALGOBIT is not set
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++# CONFIG_I2C_ALI1535 is not set
++# CONFIG_I2C_ALI1563 is not set
++# CONFIG_I2C_ALI15X3 is not set
++# CONFIG_I2C_AMD756 is not set
++# CONFIG_I2C_AMD8111 is not set
++# CONFIG_I2C_I801 is not set
++# CONFIG_I2C_I810 is not set
++# CONFIG_I2C_PIIX4 is not set
++CONFIG_I2C_MPC=y
++# CONFIG_I2C_NFORCE2 is not set
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_PROSAVAGE is not set
++# CONFIG_I2C_SAVAGE4 is not set
++# CONFIG_I2C_SIMTEC is not set
++# CONFIG_I2C_SIS5595 is not set
++# CONFIG_I2C_SIS630 is not set
++# CONFIG_I2C_SIS96X is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_VIA is not set
++# CONFIG_I2C_VIAPRO is not set
++# CONFIG_I2C_VOODOO3 is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_EEPROM is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TPS65010 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_SENSORS_AD7418 is not set
++# CONFIG_SENSORS_ADM1021 is not set
++# CONFIG_SENSORS_ADM1025 is not set
++# CONFIG_SENSORS_ADM1026 is not set
++# CONFIG_SENSORS_ADM1029 is not set
++# CONFIG_SENSORS_ADM1031 is not set
++# CONFIG_SENSORS_ADM9240 is not set
++# CONFIG_SENSORS_ADT7470 is not set
++# CONFIG_SENSORS_ADT7473 is not set
++# CONFIG_SENSORS_ATXP1 is not set
++# CONFIG_SENSORS_DS1621 is not set
++# CONFIG_SENSORS_I5K_AMB is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_F71882FG is not set
++# CONFIG_SENSORS_F75375S is not set
++# CONFIG_SENSORS_GL518SM is not set
++# CONFIG_SENSORS_GL520SM is not set
++# CONFIG_SENSORS_IT87 is not set
++# CONFIG_SENSORS_LM63 is not set
++# CONFIG_SENSORS_LM75 is not set
++# CONFIG_SENSORS_LM77 is not set
++# CONFIG_SENSORS_LM78 is not set
++# CONFIG_SENSORS_LM80 is not set
++# CONFIG_SENSORS_LM83 is not set
++# CONFIG_SENSORS_LM85 is not set
++# CONFIG_SENSORS_LM87 is not set
++# CONFIG_SENSORS_LM90 is not set
++# CONFIG_SENSORS_LM92 is not set
++# CONFIG_SENSORS_LM93 is not set
++# CONFIG_SENSORS_MAX1619 is not set
++# CONFIG_SENSORS_MAX6650 is not set
++# CONFIG_SENSORS_PC87360 is not set
++# CONFIG_SENSORS_PC87427 is not set
++# CONFIG_SENSORS_SIS5595 is not set
++# CONFIG_SENSORS_DME1737 is not set
++# CONFIG_SENSORS_SMSC47M1 is not set
++# CONFIG_SENSORS_SMSC47M192 is not set
++# CONFIG_SENSORS_SMSC47B397 is not set
++# CONFIG_SENSORS_ADS7828 is not set
++# CONFIG_SENSORS_THMC50 is not set
++# CONFIG_SENSORS_VIA686A is not set
++# CONFIG_SENSORS_VT1211 is not set
++# CONFIG_SENSORS_VT8231 is not set
++# CONFIG_SENSORS_W83781D is not set
++# CONFIG_SENSORS_W83791D is not set
++# CONFIG_SENSORS_W83792D is not set
++# CONFIG_SENSORS_W83793 is not set
++# CONFIG_SENSORS_W83L785TS is not set
++# CONFIG_SENSORS_W83L786NG is not set
++# CONFIG_SENSORS_W83627HF is not set
++# CONFIG_SENSORS_W83627EHF is not set
++# CONFIG_HWMON_DEBUG_CHIP is not set
++# CONFIG_THERMAL is not set
++CONFIG_WATCHDOG=y
++# CONFIG_WATCHDOG_NOWAYOUT is not set
++
++#
++# Watchdog Device Drivers
++#
++CONFIG_SOFT_WATCHDOG=m
++
++#
++# PCI-based Watchdog Cards
++#
++# CONFIG_PCIPCWATCHDOG is not set
++# CONFIG_WDTPCI is not set
++
++#
++# Sonics Silicon Backplane
++#
++CONFIG_SSB_POSSIBLE=y
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_SM501 is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++CONFIG_DAB=y
++
++#
++# Graphics support
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=m
++# CONFIG_FB is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Console display driver support
++#
++CONFIG_VGA_CONSOLE=y
++# CONFIG_VGACON_SOFT_SCROLLBACK is not set
++CONFIG_DUMMY_CONSOLE=y
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++# CONFIG_USB is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++# CONFIG_USB_GADGET is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_NEW_LEDS is not set
++# CONFIG_INFINIBAND is not set
++# CONFIG_EDAC is not set
++# CONFIG_RTC_CLASS is not set
++# CONFIG_DMADEVICES is not set
++
++#
++# Userspace I/O
++#
++# CONFIG_UIO is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++CONFIG_EXT2_FS_XATTR=y
++CONFIG_EXT2_FS_POSIX_ACL=y
++# CONFIG_EXT2_FS_SECURITY is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++CONFIG_EXT3_FS_POSIX_ACL=y
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++# CONFIG_JBD_DEBUG is not set
++CONFIG_FS_MBCACHE=y
++CONFIG_REISERFS_FS=m
++# CONFIG_REISERFS_CHECK is not set
++# CONFIG_REISERFS_PROC_INFO is not set
++CONFIG_REISERFS_FS_XATTR=y
++CONFIG_REISERFS_FS_POSIX_ACL=y
++# CONFIG_REISERFS_FS_SECURITY is not set
++# CONFIG_JFS_FS is not set
++CONFIG_FS_POSIX_ACL=y
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++CONFIG_OCFS2_FS=m
++CONFIG_OCFS2_DEBUG_MASKLOG=y
++# CONFIG_OCFS2_DEBUG_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++CONFIG_AUTOFS_FS=m
++CONFIG_AUTOFS4_FS=m
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++# CONFIG_MSDOS_FS is not set
++# CONFIG_VFAT_FS is not set
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_CONFIGFS_FS=m
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_JFFS2_FS is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++CONFIG_MINIX_FS=m
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++CONFIG_ROMFS_FS=m
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++CONFIG_NFS_V4=y
++CONFIG_NFS_DIRECTIO=y
++# CONFIG_NFSD is not set
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++CONFIG_SUNRPC_GSS=y
++# CONFIG_SUNRPC_BIND34 is not set
++CONFIG_RPCSEC_GSS_KRB5=y
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++CONFIG_SMB_FS=m
++CONFIG_SMB_NLS_DEFAULT=y
++CONFIG_SMB_NLS_REMOTE="cp437"
++CONFIG_CIFS=m
++# CONFIG_CIFS_STATS is not set
++# CONFIG_CIFS_WEAK_PW_HASH is not set
++CONFIG_CIFS_XATTR=y
++CONFIG_CIFS_POSIX=y
++# CONFIG_CIFS_DEBUG2 is not set
++# CONFIG_CIFS_EXPERIMENTAL is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++CONFIG_NLS=m
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=m
++CONFIG_NLS_CODEPAGE_737=m
++CONFIG_NLS_CODEPAGE_775=m
++CONFIG_NLS_CODEPAGE_850=m
++CONFIG_NLS_CODEPAGE_852=m
++CONFIG_NLS_CODEPAGE_855=m
++CONFIG_NLS_CODEPAGE_857=m
++CONFIG_NLS_CODEPAGE_860=m
++CONFIG_NLS_CODEPAGE_861=m
++CONFIG_NLS_CODEPAGE_862=m
++CONFIG_NLS_CODEPAGE_863=m
++CONFIG_NLS_CODEPAGE_864=m
++CONFIG_NLS_CODEPAGE_865=m
++CONFIG_NLS_CODEPAGE_866=m
++CONFIG_NLS_CODEPAGE_869=m
++CONFIG_NLS_CODEPAGE_936=m
++CONFIG_NLS_CODEPAGE_950=m
++CONFIG_NLS_CODEPAGE_932=m
++CONFIG_NLS_CODEPAGE_949=m
++CONFIG_NLS_CODEPAGE_874=m
++CONFIG_NLS_ISO8859_8=m
++CONFIG_NLS_CODEPAGE_1250=m
++CONFIG_NLS_CODEPAGE_1251=m
++CONFIG_NLS_ASCII=m
++CONFIG_NLS_ISO8859_1=m
++CONFIG_NLS_ISO8859_2=m
++CONFIG_NLS_ISO8859_3=m
++CONFIG_NLS_ISO8859_4=m
++CONFIG_NLS_ISO8859_5=m
++CONFIG_NLS_ISO8859_6=m
++CONFIG_NLS_ISO8859_7=m
++CONFIG_NLS_ISO8859_9=m
++CONFIG_NLS_ISO8859_13=m
++CONFIG_NLS_ISO8859_14=m
++CONFIG_NLS_ISO8859_15=m
++CONFIG_NLS_KOI8_R=m
++CONFIG_NLS_KOI8_U=m
++CONFIG_NLS_UTF8=m
++# CONFIG_DLM is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_CRC_CCITT=m
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++CONFIG_LIBCRC32C=m
++CONFIG_ZLIB_INFLATE=m
++CONFIG_ZLIB_DEFLATE=m
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++CONFIG_HAVE_LMB=y
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_DEBUG_SLAB is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++# CONFIG_DEBUG_BUGVERBOSE is not set
++CONFIG_DEBUG_INFO=y
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_SAMPLES is not set
++# CONFIG_DEBUG_STACKOVERFLOW is not set
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_PAGEALLOC is not set
++CONFIG_DEBUGGER=y
++# CONFIG_XMON is not set
++# CONFIG_VIRQ_DEBUG is not set
++# CONFIG_BDI_SWITCH is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++CONFIG_SECURITY=y
++CONFIG_SECURITY_NETWORK=y
++# CONFIG_SECURITY_NETWORK_XFRM is not set
++CONFIG_SECURITY_CAPABILITIES=y
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_AEAD=m
++CONFIG_CRYPTO_BLKCIPHER=y
++# CONFIG_CRYPTO_SEQIV is not set
++CONFIG_CRYPTO_HASH=y
++CONFIG_CRYPTO_MANAGER=y
++CONFIG_CRYPTO_HMAC=y
++# CONFIG_CRYPTO_XCBC is not set
++CONFIG_CRYPTO_NULL=m
++CONFIG_CRYPTO_MD4=m
++CONFIG_CRYPTO_MD5=y
++CONFIG_CRYPTO_SHA1=m
++CONFIG_CRYPTO_SHA256=m
++CONFIG_CRYPTO_SHA512=m
++CONFIG_CRYPTO_WP512=m
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_GF128MUL is not set
++CONFIG_CRYPTO_ECB=m
++CONFIG_CRYPTO_CBC=y
++CONFIG_CRYPTO_PCBC=m
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_XTS is not set
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++CONFIG_CRYPTO_BLOWFISH=m
++CONFIG_CRYPTO_TWOFISH=m
++CONFIG_CRYPTO_TWOFISH_COMMON=m
++CONFIG_CRYPTO_SERPENT=m
++CONFIG_CRYPTO_AES=m
++CONFIG_CRYPTO_CAST5=m
++CONFIG_CRYPTO_CAST6=m
++CONFIG_CRYPTO_TEA=m
++CONFIG_CRYPTO_ARC4=m
++CONFIG_CRYPTO_KHAZAD=m
++CONFIG_CRYPTO_ANUBIS=m
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++CONFIG_CRYPTO_DEFLATE=m
++CONFIG_CRYPTO_MICHAEL_MIC=m
++CONFIG_CRYPTO_CRC32C=m
++# CONFIG_CRYPTO_CAMELLIA is not set
++CONFIG_CRYPTO_TEST=m
++CONFIG_CRYPTO_AUTHENC=m
++# CONFIG_CRYPTO_LZO is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_CRYPTO_DEV_HIFN_795X is not set
++# CONFIG_PPC_CLOCK is not set
+--- a/arch/powerpc/configs/sequoia_defconfig
++++ /dev/null
+@@ -1,916 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc2
+-# Fri Feb 15 21:53:46 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-# CONFIG_6xx is not set
+-# CONFIG_PPC_85xx is not set
+-# CONFIG_PPC_8xx is not set
+-# CONFIG_40x is not set
+-CONFIG_44x=y
+-# CONFIG_E200 is not set
+-CONFIG_PPC_FPU=y
+-CONFIG_4xx=y
+-CONFIG_BOOKE=y
+-CONFIG_PTE_64BIT=y
+-CONFIG_PHYS_64BIT=y
+-# CONFIG_PPC_MM_SLICES is not set
+-CONFIG_NOT_COHERENT_CACHE=y
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-# CONFIG_DEFAULT_UIMAGE is not set
+-CONFIG_PPC_DCR_NATIVE=y
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_PPC_DCR=y
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-CONFIG_POSIX_MQUEUE=y
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-# CONFIG_FAIR_GROUP_SCHED is not set
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-CONFIG_KALLSYMS=y
+-# CONFIG_KALLSYMS_ALL is not set
+-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-CONFIG_EPOLL=y
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLUB_DEBUG=y
+-# CONFIG_SLAB is not set
+-CONFIG_SLUB=y
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-# CONFIG_KPROBES is not set
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-CONFIG_MODULES=y
+-CONFIG_MODULE_UNLOAD=y
+-# CONFIG_MODULE_FORCE_UNLOAD is not set
+-# CONFIG_MODVERSIONS is not set
+-# CONFIG_MODULE_SRCVERSION_ALL is not set
+-CONFIG_KMOD=y
+-CONFIG_BLOCK=y
+-CONFIG_LBD=y
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-# CONFIG_PREEMPT_RCU is not set
+-# CONFIG_PPC4xx_PCI_EXPRESS is not set
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-# CONFIG_BAMBOO is not set
+-# CONFIG_EBONY is not set
+-CONFIG_SEQUOIA=y
+-# CONFIG_TAISHAN is not set
+-# CONFIG_KATMAI is not set
+-# CONFIG_RAINIER is not set
+-# CONFIG_WARP is not set
+-CONFIG_440EPX=y
+-# CONFIG_IPIC is not set
+-# CONFIG_MPIC is not set
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-# CONFIG_FSL_ULI1575 is not set
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-CONFIG_TICK_ONESHOT=y
+-CONFIG_NO_HZ=y
+-CONFIG_HIGH_RES_TIMERS=y
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_RCU_TRACE=y
+-CONFIG_BINFMT_ELF=y
+-# CONFIG_BINFMT_MISC is not set
+-# CONFIG_MATH_EMULATION is not set
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-CONFIG_RESOURCES_64BIT=y
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-CONFIG_PROC_DEVICETREE=y
+-CONFIG_CMDLINE_BOOL=y
+-CONFIG_CMDLINE=""
+-CONFIG_SECCOMP=y
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_PCI=y
+-CONFIG_PCI_DOMAINS=y
+-CONFIG_PCI_SYSCALL=y
+-# CONFIG_PCIEPORTBUS is not set
+-CONFIG_ARCH_SUPPORTS_MSI=y
+-# CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
+-# CONFIG_PCI_DEBUG is not set
+-# CONFIG_PCCARD is not set
+-# CONFIG_HOTPLUG_PCI is not set
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_CONSISTENT_START=0xff100000
+-CONFIG_CONSISTENT_SIZE=0x00200000
+-CONFIG_BOOT_LOAD=0x01000000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-# CONFIG_IP_MULTICAST is not set
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_ARPD is not set
+-# CONFIG_SYN_COOKIES is not set
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_BEET is not set
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-CONFIG_FW_LOADER=y
+-# CONFIG_DEBUG_DRIVER is not set
+-# CONFIG_DEBUG_DEVRES is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-CONFIG_CONNECTOR=y
+-CONFIG_PROC_EVENTS=y
+-CONFIG_MTD=y
+-# CONFIG_MTD_DEBUG is not set
+-# CONFIG_MTD_CONCAT is not set
+-CONFIG_MTD_PARTITIONS=y
+-# CONFIG_MTD_REDBOOT_PARTS is not set
+-CONFIG_MTD_CMDLINE_PARTS=y
+-CONFIG_MTD_OF_PARTS=y
+-
+-#
+-# User Modules And Translation Layers
+-#
+-CONFIG_MTD_CHAR=y
+-# CONFIG_MTD_BLKDEVS is not set
+-# CONFIG_MTD_BLOCK is not set
+-# CONFIG_MTD_BLOCK_RO is not set
+-# CONFIG_FTL is not set
+-# CONFIG_NFTL is not set
+-# CONFIG_INFTL is not set
+-# CONFIG_RFD_FTL is not set
+-# CONFIG_SSFDC is not set
+-# CONFIG_MTD_OOPS is not set
+-
+-#
+-# RAM/ROM/Flash chip drivers
+-#
+-CONFIG_MTD_CFI=y
+-CONFIG_MTD_JEDECPROBE=y
+-CONFIG_MTD_GEN_PROBE=y
+-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+-CONFIG_MTD_MAP_BANK_WIDTH_1=y
+-CONFIG_MTD_MAP_BANK_WIDTH_2=y
+-CONFIG_MTD_MAP_BANK_WIDTH_4=y
+-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+-CONFIG_MTD_CFI_I1=y
+-CONFIG_MTD_CFI_I2=y
+-# CONFIG_MTD_CFI_I4 is not set
+-# CONFIG_MTD_CFI_I8 is not set
+-CONFIG_MTD_CFI_INTELEXT=y
+-CONFIG_MTD_CFI_AMDSTD=y
+-# CONFIG_MTD_CFI_STAA is not set
+-CONFIG_MTD_CFI_UTIL=y
+-# CONFIG_MTD_RAM is not set
+-# CONFIG_MTD_ROM is not set
+-# CONFIG_MTD_ABSENT is not set
+-
+-#
+-# Mapping drivers for chip access
+-#
+-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+-# CONFIG_MTD_PHYSMAP is not set
+-CONFIG_MTD_PHYSMAP_OF=y
+-# CONFIG_MTD_INTEL_VR_NOR is not set
+-# CONFIG_MTD_PLATRAM is not set
+-
+-#
+-# Self-contained MTD device drivers
+-#
+-# CONFIG_MTD_PMC551 is not set
+-# CONFIG_MTD_SLRAM is not set
+-# CONFIG_MTD_PHRAM is not set
+-# CONFIG_MTD_MTDRAM is not set
+-# CONFIG_MTD_BLOCK2MTD is not set
+-
+-#
+-# Disk-On-Chip Device Drivers
+-#
+-# CONFIG_MTD_DOC2000 is not set
+-# CONFIG_MTD_DOC2001 is not set
+-# CONFIG_MTD_DOC2001PLUS is not set
+-# CONFIG_MTD_NAND is not set
+-# CONFIG_MTD_ONENAND is not set
+-
+-#
+-# UBI - Unsorted block images
+-#
+-# CONFIG_MTD_UBI is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_CPQ_DA is not set
+-# CONFIG_BLK_CPQ_CISS_DA is not set
+-# CONFIG_BLK_DEV_DAC960 is not set
+-# CONFIG_BLK_DEV_UMEM is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-# CONFIG_BLK_DEV_LOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-# CONFIG_BLK_DEV_SX8 is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=35000
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-# CONFIG_XILINX_SYSACE is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_PHANTOM is not set
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_SGI_IOC4 is not set
+-# CONFIG_TIFM_CORE is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-# CONFIG_IDE is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-# CONFIG_SCSI is not set
+-# CONFIG_SCSI_DMA is not set
+-# CONFIG_SCSI_NETLINK is not set
+-# CONFIG_ATA is not set
+-# CONFIG_MD is not set
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-# CONFIG_FIREWIRE is not set
+-# CONFIG_IEEE1394 is not set
+-# CONFIG_I2O is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_ARCNET is not set
+-# CONFIG_PHYLIB is not set
+-CONFIG_NET_ETHERNET=y
+-# CONFIG_MII is not set
+-# CONFIG_HAPPYMEAL is not set
+-# CONFIG_SUNGEM is not set
+-# CONFIG_CASSINI is not set
+-# CONFIG_NET_VENDOR_3COM is not set
+-# CONFIG_NET_TULIP is not set
+-# CONFIG_HP100 is not set
+-CONFIG_IBM_NEW_EMAC=y
+-CONFIG_IBM_NEW_EMAC_RXB=128
+-CONFIG_IBM_NEW_EMAC_TXB=64
+-CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+-CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+-CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+-# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+-CONFIG_IBM_NEW_EMAC_ZMII=y
+-CONFIG_IBM_NEW_EMAC_RGMII=y
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-CONFIG_IBM_NEW_EMAC_EMAC4=y
+-# CONFIG_NET_PCI is not set
+-# CONFIG_B44 is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_ACENIC is not set
+-# CONFIG_DL2K is not set
+-# CONFIG_E1000 is not set
+-# CONFIG_E1000E is not set
+-# CONFIG_E1000E_ENABLED is not set
+-# CONFIG_IP1000 is not set
+-# CONFIG_IGB is not set
+-# CONFIG_NS83820 is not set
+-# CONFIG_HAMACHI is not set
+-# CONFIG_YELLOWFIN is not set
+-# CONFIG_R8169 is not set
+-# CONFIG_SIS190 is not set
+-# CONFIG_SKGE is not set
+-# CONFIG_SKY2 is not set
+-# CONFIG_SK98LIN is not set
+-# CONFIG_VIA_VELOCITY is not set
+-# CONFIG_TIGON3 is not set
+-# CONFIG_BNX2 is not set
+-# CONFIG_QLA3XXX is not set
+-# CONFIG_ATL1 is not set
+-CONFIG_NETDEV_10000=y
+-# CONFIG_CHELSIO_T1 is not set
+-# CONFIG_CHELSIO_T3 is not set
+-# CONFIG_IXGBE is not set
+-# CONFIG_IXGB is not set
+-# CONFIG_S2IO is not set
+-# CONFIG_MYRI10GE is not set
+-# CONFIG_NETXEN_NIC is not set
+-# CONFIG_NIU is not set
+-# CONFIG_MLX4_CORE is not set
+-# CONFIG_TEHUTI is not set
+-# CONFIG_BNX2X is not set
+-# CONFIG_TR is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-# CONFIG_WAN is not set
+-# CONFIG_FDDI is not set
+-# CONFIG_HIPPI is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-# CONFIG_INPUT is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-# CONFIG_NOZOMI is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-# CONFIG_SERIAL_8250_PCI is not set
+-CONFIG_SERIAL_8250_NR_UARTS=4
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-CONFIG_SERIAL_8250_EXTENDED=y
+-# CONFIG_SERIAL_8250_MANY_PORTS is not set
+-CONFIG_SERIAL_8250_SHARE_IRQ=y
+-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+-# CONFIG_SERIAL_8250_RSA is not set
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_JSM is not set
+-CONFIG_SERIAL_OF_PLATFORM=y
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-# CONFIG_HW_RANDOM is not set
+-# CONFIG_NVRAM is not set
+-# CONFIG_GEN_RTC is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_APPLICOM is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_DEVPORT=y
+-# CONFIG_I2C is not set
+-
+-#
+-# SPI support
+-#
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-# CONFIG_HWMON is not set
+-CONFIG_THERMAL=y
+-# CONFIG_WATCHDOG is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-CONFIG_DAB=y
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_AGP is not set
+-# CONFIG_DRM is not set
+-# CONFIG_VGASTATE is not set
+-CONFIG_VIDEO_OUTPUT_CONTROL=m
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-CONFIG_USB_SUPPORT=y
+-CONFIG_USB_ARCH_HAS_HCD=y
+-CONFIG_USB_ARCH_HAS_OHCI=y
+-CONFIG_USB_ARCH_HAS_EHCI=y
+-# CONFIG_USB is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_INFINIBAND is not set
+-# CONFIG_EDAC is not set
+-# CONFIG_RTC_CLASS is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-# CONFIG_EXT3_FS is not set
+-# CONFIG_EXT4DEV_FS is not set
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-# CONFIG_MSDOS_FS is not set
+-# CONFIG_VFAT_FS is not set
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-CONFIG_JFFS2_FS=y
+-CONFIG_JFFS2_FS_DEBUG=0
+-CONFIG_JFFS2_FS_WRITEBUFFER=y
+-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+-# CONFIG_JFFS2_SUMMARY is not set
+-# CONFIG_JFFS2_FS_XATTR is not set
+-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+-CONFIG_JFFS2_ZLIB=y
+-# CONFIG_JFFS2_LZO is not set
+-CONFIG_JFFS2_RTIME=y
+-# CONFIG_JFFS2_RUBIN is not set
+-CONFIG_CRAMFS=y
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-CONFIG_NFS_V3=y
+-# CONFIG_NFS_V3_ACL is not set
+-# CONFIG_NFS_V4 is not set
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_LOCKD_V4=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-# CONFIG_RPCSEC_GSS_KRB5 is not set
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-# CONFIG_PARTITION_ADVANCED is not set
+-CONFIG_MSDOS_PARTITION=y
+-# CONFIG_NLS is not set
+-# CONFIG_DLM is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_ZLIB_INFLATE=y
+-CONFIG_ZLIB_DEFLATE=y
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-CONFIG_MAGIC_SYSRQ=y
+-# CONFIG_UNUSED_SYMBOLS is not set
+-CONFIG_DEBUG_FS=y
+-# CONFIG_HEADERS_CHECK is not set
+-CONFIG_DEBUG_KERNEL=y
+-# CONFIG_DEBUG_SHIRQ is not set
+-CONFIG_DETECT_SOFTLOCKUP=y
+-CONFIG_SCHED_DEBUG=y
+-# CONFIG_SCHEDSTATS is not set
+-# CONFIG_TIMER_STATS is not set
+-# CONFIG_SLUB_DEBUG_ON is not set
+-# CONFIG_SLUB_STATS is not set
+-# CONFIG_DEBUG_RT_MUTEXES is not set
+-# CONFIG_RT_MUTEX_TESTER is not set
+-# CONFIG_DEBUG_SPINLOCK is not set
+-# CONFIG_DEBUG_MUTEXES is not set
+-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+-# CONFIG_DEBUG_KOBJECT is not set
+-# CONFIG_DEBUG_BUGVERBOSE is not set
+-# CONFIG_DEBUG_INFO is not set
+-# CONFIG_DEBUG_VM is not set
+-# CONFIG_DEBUG_LIST is not set
+-# CONFIG_DEBUG_SG is not set
+-# CONFIG_BOOT_PRINTK_DELAY is not set
+-# CONFIG_RCU_TORTURE_TEST is not set
+-# CONFIG_BACKTRACE_SELF_TEST is not set
+-# CONFIG_FAULT_INJECTION is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_DEBUG_STACKOVERFLOW is not set
+-# CONFIG_DEBUG_STACK_USAGE is not set
+-# CONFIG_DEBUG_PAGEALLOC is not set
+-CONFIG_DEBUGGER=y
+-# CONFIG_KGDB is not set
+-# CONFIG_XMON is not set
+-# CONFIG_VIRQ_DEBUG is not set
+-# CONFIG_BDI_SWITCH is not set
+-CONFIG_PPC_EARLY_DEBUG=y
+-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+-# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
+-# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
+-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+-# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
+-# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
+-CONFIG_PPC_EARLY_DEBUG_44x=y
+-# CONFIG_PPC_EARLY_DEBUG_40x is not set
+-# CONFIG_PPC_EARLY_DEBUG_CPM is not set
+-CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0xef600300
+-CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_BLKCIPHER=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-CONFIG_CRYPTO_MANAGER=y
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-CONFIG_CRYPTO_MD5=y
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-CONFIG_CRYPTO_ECB=y
+-CONFIG_CRYPTO_CBC=y
+-CONFIG_CRYPTO_PCBC=y
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-CONFIG_CRYPTO_DES=y
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_TEST is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+-# CONFIG_PPC_CLOCK is not set
+--- a/arch/powerpc/configs/stx_gp3_defconfig
++++ /dev/null
+@@ -1,1253 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc6
+-# Mon Mar 24 08:48:42 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-# CONFIG_6xx is not set
+-CONFIG_PPC_85xx=y
+-# CONFIG_PPC_8xx is not set
+-# CONFIG_40x is not set
+-# CONFIG_44x is not set
+-# CONFIG_E200 is not set
+-CONFIG_E500=y
+-CONFIG_BOOKE=y
+-CONFIG_FSL_BOOKE=y
+-CONFIG_FSL_EMB_PERFMON=y
+-# CONFIG_PHYS_64BIT is not set
+-CONFIG_SPE=y
+-# CONFIG_PPC_MM_SLICES is not set
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-CONFIG_DEFAULT_UIMAGE=y
+-# CONFIG_PPC_DCR_NATIVE is not set
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-# CONFIG_POSIX_MQUEUE is not set
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-CONFIG_FAIR_GROUP_SCHED=y
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-CONFIG_SYSFS_DEPRECATED_V2=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-CONFIG_KALLSYMS=y
+-# CONFIG_KALLSYMS_ALL is not set
+-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-CONFIG_EPOLL=y
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLUB_DEBUG=y
+-# CONFIG_SLAB is not set
+-CONFIG_SLUB=y
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-# CONFIG_KPROBES is not set
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_HAVE_KRETPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-CONFIG_MODULES=y
+-# CONFIG_MODULE_UNLOAD is not set
+-CONFIG_MODVERSIONS=y
+-# CONFIG_MODULE_SRCVERSION_ALL is not set
+-CONFIG_KMOD=y
+-CONFIG_BLOCK=y
+-# CONFIG_LBD is not set
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-# CONFIG_DEFAULT_AS is not set
+-# CONFIG_DEFAULT_DEADLINE is not set
+-CONFIG_DEFAULT_CFQ=y
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="cfq"
+-CONFIG_CLASSIC_RCU=y
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-CONFIG_MPC85xx=y
+-# CONFIG_MPC8540_ADS is not set
+-# CONFIG_MPC8560_ADS is not set
+-# CONFIG_MPC85xx_CDS is not set
+-# CONFIG_MPC85xx_MDS is not set
+-# CONFIG_MPC85xx_DS is not set
+-CONFIG_STX_GP3=y
+-# CONFIG_TQM8540 is not set
+-# CONFIG_TQM8541 is not set
+-# CONFIG_TQM8555 is not set
+-# CONFIG_TQM8560 is not set
+-# CONFIG_SBC8548 is not set
+-# CONFIG_SBC8560 is not set
+-# CONFIG_IPIC is not set
+-CONFIG_MPIC=y
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-CONFIG_CPM2=y
+-CONFIG_PPC_CPM_NEW_BINDING=y
+-# CONFIG_FSL_ULI1575 is not set
+-CONFIG_CPM=y
+-
+-#
+-# Kernel options
+-#
+-CONFIG_HIGHMEM=y
+-# CONFIG_TICK_ONESHOT is not set
+-# CONFIG_NO_HZ is not set
+-# CONFIG_HIGH_RES_TIMERS is not set
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_BINFMT_ELF=y
+-CONFIG_BINFMT_MISC=m
+-CONFIG_MATH_EMULATION=y
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_RESOURCES_64BIT is not set
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-CONFIG_PROC_DEVICETREE=y
+-# CONFIG_CMDLINE_BOOL is not set
+-# CONFIG_PM is not set
+-CONFIG_SECCOMP=y
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_FSL_SOC=y
+-CONFIG_FSL_PCI=y
+-CONFIG_PCI=y
+-CONFIG_PCI_DOMAINS=y
+-CONFIG_PCI_SYSCALL=y
+-# CONFIG_PCIEPORTBUS is not set
+-CONFIG_ARCH_SUPPORTS_MSI=y
+-# CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
+-# CONFIG_PCI_DEBUG is not set
+-# CONFIG_PCCARD is not set
+-# CONFIG_HOTPLUG_PCI is not set
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_BOOT_LOAD=0x00800000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-CONFIG_XFRM=y
+-# CONFIG_XFRM_USER is not set
+-# CONFIG_XFRM_SUB_POLICY is not set
+-# CONFIG_XFRM_MIGRATE is not set
+-# CONFIG_XFRM_STATISTICS is not set
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-# CONFIG_IP_MULTICAST is not set
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-# CONFIG_IP_PNP_DHCP is not set
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_ARPD is not set
+-# CONFIG_SYN_COOKIES is not set
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-CONFIG_INET_XFRM_MODE_TRANSPORT=y
+-CONFIG_INET_XFRM_MODE_TUNNEL=y
+-CONFIG_INET_XFRM_MODE_BEET=y
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IP_VS is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-CONFIG_NETFILTER=y
+-# CONFIG_NETFILTER_DEBUG is not set
+-CONFIG_NETFILTER_ADVANCED=y
+-
+-#
+-# Core Netfilter Configuration
+-#
+-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+-# CONFIG_NETFILTER_NETLINK_LOG is not set
+-# CONFIG_NF_CONNTRACK is not set
+-CONFIG_NETFILTER_XTABLES=m
+-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+-
+-#
+-# IP: Netfilter Configuration
+-#
+-# CONFIG_IP_NF_QUEUE is not set
+-CONFIG_IP_NF_IPTABLES=m
+-# CONFIG_IP_NF_MATCH_RECENT is not set
+-# CONFIG_IP_NF_MATCH_ECN is not set
+-# CONFIG_IP_NF_MATCH_AH is not set
+-# CONFIG_IP_NF_MATCH_TTL is not set
+-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+-CONFIG_IP_NF_FILTER=m
+-# CONFIG_IP_NF_TARGET_REJECT is not set
+-# CONFIG_IP_NF_TARGET_LOG is not set
+-# CONFIG_IP_NF_TARGET_ULOG is not set
+-# CONFIG_IP_NF_MANGLE is not set
+-# CONFIG_IP_NF_RAW is not set
+-# CONFIG_IP_NF_ARPTABLES is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-CONFIG_NET_PKTGEN=y
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-# CONFIG_FW_LOADER is not set
+-# CONFIG_DEBUG_DRIVER is not set
+-# CONFIG_DEBUG_DEVRES is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-# CONFIG_CONNECTOR is not set
+-# CONFIG_MTD is not set
+-CONFIG_OF_DEVICE=y
+-CONFIG_PARPORT=m
+-CONFIG_PARPORT_PC=m
+-# CONFIG_PARPORT_PC_FIFO is not set
+-# CONFIG_PARPORT_PC_SUPERIO is not set
+-# CONFIG_PARPORT_GSC is not set
+-# CONFIG_PARPORT_AX88796 is not set
+-# CONFIG_PARPORT_1284 is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_PARIDE is not set
+-# CONFIG_BLK_CPQ_DA is not set
+-# CONFIG_BLK_CPQ_CISS_DA is not set
+-# CONFIG_BLK_DEV_DAC960 is not set
+-# CONFIG_BLK_DEV_UMEM is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-CONFIG_BLK_DEV_LOOP=m
+-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+-CONFIG_BLK_DEV_NBD=m
+-# CONFIG_BLK_DEV_SX8 is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=32768
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_PHANTOM is not set
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_SGI_IOC4 is not set
+-# CONFIG_TIFM_CORE is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-CONFIG_IDE=y
+-CONFIG_IDE_MAX_HWIFS=4
+-CONFIG_BLK_DEV_IDE=y
+-
+-#
+-# Please see Documentation/ide/ide.txt for help/info on IDE drives
+-#
+-# CONFIG_BLK_DEV_IDE_SATA is not set
+-CONFIG_BLK_DEV_IDEDISK=y
+-# CONFIG_IDEDISK_MULTI_MODE is not set
+-CONFIG_BLK_DEV_IDECD=m
+-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+-# CONFIG_BLK_DEV_IDETAPE is not set
+-# CONFIG_BLK_DEV_IDEFLOPPY is not set
+-# CONFIG_BLK_DEV_IDESCSI is not set
+-# CONFIG_IDE_TASK_IOCTL is not set
+-CONFIG_IDE_PROC_FS=y
+-
+-#
+-# IDE chipset support/bugfixes
+-#
+-CONFIG_IDE_GENERIC=y
+-# CONFIG_BLK_DEV_PLATFORM is not set
+-
+-#
+-# PCI IDE chipsets support
+-#
+-# CONFIG_BLK_DEV_GENERIC is not set
+-# CONFIG_BLK_DEV_OPTI621 is not set
+-# CONFIG_BLK_DEV_AEC62XX is not set
+-# CONFIG_BLK_DEV_ALI15X3 is not set
+-# CONFIG_BLK_DEV_AMD74XX is not set
+-# CONFIG_BLK_DEV_CMD64X is not set
+-# CONFIG_BLK_DEV_TRIFLEX is not set
+-# CONFIG_BLK_DEV_CY82C693 is not set
+-# CONFIG_BLK_DEV_CS5520 is not set
+-# CONFIG_BLK_DEV_CS5530 is not set
+-# CONFIG_BLK_DEV_HPT34X is not set
+-# CONFIG_BLK_DEV_HPT366 is not set
+-# CONFIG_BLK_DEV_JMICRON is not set
+-# CONFIG_BLK_DEV_SC1200 is not set
+-# CONFIG_BLK_DEV_PIIX is not set
+-# CONFIG_BLK_DEV_IT8213 is not set
+-# CONFIG_BLK_DEV_IT821X is not set
+-# CONFIG_BLK_DEV_NS87415 is not set
+-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+-# CONFIG_BLK_DEV_SVWKS is not set
+-# CONFIG_BLK_DEV_SIIMAGE is not set
+-# CONFIG_BLK_DEV_SL82C105 is not set
+-# CONFIG_BLK_DEV_SLC90E66 is not set
+-# CONFIG_BLK_DEV_TRM290 is not set
+-# CONFIG_BLK_DEV_VIA82CXXX is not set
+-# CONFIG_BLK_DEV_TC86C001 is not set
+-# CONFIG_BLK_DEV_IDEDMA is not set
+-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+-# CONFIG_BLK_DEV_HD is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-CONFIG_SCSI=m
+-CONFIG_SCSI_DMA=y
+-# CONFIG_SCSI_TGT is not set
+-# CONFIG_SCSI_NETLINK is not set
+-CONFIG_SCSI_PROC_FS=y
+-
+-#
+-# SCSI support type (disk, tape, CD-ROM)
+-#
+-CONFIG_BLK_DEV_SD=m
+-CONFIG_CHR_DEV_ST=m
+-# CONFIG_CHR_DEV_OSST is not set
+-CONFIG_BLK_DEV_SR=m
+-# CONFIG_BLK_DEV_SR_VENDOR is not set
+-CONFIG_CHR_DEV_SG=m
+-# CONFIG_CHR_DEV_SCH is not set
+-
+-#
+-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+-#
+-CONFIG_SCSI_MULTI_LUN=y
+-CONFIG_SCSI_CONSTANTS=y
+-# CONFIG_SCSI_LOGGING is not set
+-# CONFIG_SCSI_SCAN_ASYNC is not set
+-CONFIG_SCSI_WAIT_SCAN=m
+-
+-#
+-# SCSI Transports
+-#
+-# CONFIG_SCSI_SPI_ATTRS is not set
+-# CONFIG_SCSI_FC_ATTRS is not set
+-# CONFIG_SCSI_ISCSI_ATTRS is not set
+-# CONFIG_SCSI_SAS_LIBSAS is not set
+-# CONFIG_SCSI_SRP_ATTRS is not set
+-CONFIG_SCSI_LOWLEVEL=y
+-# CONFIG_ISCSI_TCP is not set
+-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+-# CONFIG_SCSI_3W_9XXX is not set
+-# CONFIG_SCSI_ACARD is not set
+-# CONFIG_SCSI_AACRAID is not set
+-# CONFIG_SCSI_AIC7XXX is not set
+-# CONFIG_SCSI_AIC7XXX_OLD is not set
+-# CONFIG_SCSI_AIC79XX is not set
+-# CONFIG_SCSI_AIC94XX is not set
+-# CONFIG_SCSI_DPT_I2O is not set
+-# CONFIG_SCSI_ADVANSYS is not set
+-# CONFIG_SCSI_ARCMSR is not set
+-# CONFIG_MEGARAID_NEWGEN is not set
+-# CONFIG_MEGARAID_LEGACY is not set
+-# CONFIG_MEGARAID_SAS is not set
+-# CONFIG_SCSI_HPTIOP is not set
+-# CONFIG_SCSI_BUSLOGIC is not set
+-# CONFIG_SCSI_DMX3191D is not set
+-# CONFIG_SCSI_EATA is not set
+-# CONFIG_SCSI_FUTURE_DOMAIN is not set
+-# CONFIG_SCSI_GDTH is not set
+-# CONFIG_SCSI_IPS is not set
+-# CONFIG_SCSI_INITIO is not set
+-# CONFIG_SCSI_INIA100 is not set
+-# CONFIG_SCSI_PPA is not set
+-# CONFIG_SCSI_IMM is not set
+-# CONFIG_SCSI_MVSAS is not set
+-# CONFIG_SCSI_STEX is not set
+-# CONFIG_SCSI_SYM53C8XX_2 is not set
+-# CONFIG_SCSI_QLOGIC_1280 is not set
+-# CONFIG_SCSI_QLA_FC is not set
+-# CONFIG_SCSI_QLA_ISCSI is not set
+-# CONFIG_SCSI_LPFC is not set
+-# CONFIG_SCSI_DC395x is not set
+-# CONFIG_SCSI_DC390T is not set
+-# CONFIG_SCSI_NSP32 is not set
+-# CONFIG_SCSI_DEBUG is not set
+-# CONFIG_SCSI_SRP is not set
+-# CONFIG_ATA is not set
+-# CONFIG_MD is not set
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-# CONFIG_FIREWIRE is not set
+-# CONFIG_IEEE1394 is not set
+-# CONFIG_I2O is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_ARCNET is not set
+-CONFIG_PHYLIB=y
+-
+-#
+-# MII PHY device drivers
+-#
+-CONFIG_MARVELL_PHY=y
+-# CONFIG_DAVICOM_PHY is not set
+-# CONFIG_QSEMI_PHY is not set
+-# CONFIG_LXT_PHY is not set
+-# CONFIG_CICADA_PHY is not set
+-# CONFIG_VITESSE_PHY is not set
+-# CONFIG_SMSC_PHY is not set
+-# CONFIG_BROADCOM_PHY is not set
+-# CONFIG_ICPLUS_PHY is not set
+-# CONFIG_REALTEK_PHY is not set
+-# CONFIG_FIXED_PHY is not set
+-# CONFIG_MDIO_BITBANG is not set
+-CONFIG_NET_ETHERNET=y
+-# CONFIG_MII is not set
+-# CONFIG_HAPPYMEAL is not set
+-# CONFIG_SUNGEM is not set
+-# CONFIG_CASSINI is not set
+-# CONFIG_NET_VENDOR_3COM is not set
+-# CONFIG_NET_TULIP is not set
+-# CONFIG_HP100 is not set
+-# CONFIG_IBM_NEW_EMAC_ZMII is not set
+-# CONFIG_IBM_NEW_EMAC_RGMII is not set
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-# CONFIG_NET_PCI is not set
+-# CONFIG_B44 is not set
+-# CONFIG_NET_POCKET is not set
+-# CONFIG_FS_ENET is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_ACENIC is not set
+-# CONFIG_DL2K is not set
+-# CONFIG_E1000 is not set
+-# CONFIG_E1000E is not set
+-# CONFIG_E1000E_ENABLED is not set
+-# CONFIG_IP1000 is not set
+-# CONFIG_IGB is not set
+-# CONFIG_NS83820 is not set
+-# CONFIG_HAMACHI is not set
+-# CONFIG_YELLOWFIN is not set
+-# CONFIG_R8169 is not set
+-# CONFIG_SIS190 is not set
+-# CONFIG_SKGE is not set
+-# CONFIG_SKY2 is not set
+-# CONFIG_SK98LIN is not set
+-# CONFIG_VIA_VELOCITY is not set
+-# CONFIG_TIGON3 is not set
+-# CONFIG_BNX2 is not set
+-CONFIG_GIANFAR=y
+-CONFIG_GFAR_NAPI=y
+-# CONFIG_QLA3XXX is not set
+-# CONFIG_ATL1 is not set
+-CONFIG_NETDEV_10000=y
+-# CONFIG_CHELSIO_T1 is not set
+-# CONFIG_CHELSIO_T3 is not set
+-# CONFIG_IXGBE is not set
+-# CONFIG_IXGB is not set
+-# CONFIG_S2IO is not set
+-# CONFIG_MYRI10GE is not set
+-# CONFIG_NETXEN_NIC is not set
+-# CONFIG_NIU is not set
+-# CONFIG_MLX4_CORE is not set
+-# CONFIG_TEHUTI is not set
+-# CONFIG_BNX2X is not set
+-# CONFIG_TR is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-# CONFIG_WAN is not set
+-# CONFIG_FDDI is not set
+-# CONFIG_HIPPI is not set
+-# CONFIG_PLIP is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NET_FC is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-CONFIG_INPUT=y
+-# CONFIG_INPUT_FF_MEMLESS is not set
+-# CONFIG_INPUT_POLLDEV is not set
+-
+-#
+-# Userland interfaces
+-#
+-CONFIG_INPUT_MOUSEDEV=y
+-CONFIG_INPUT_MOUSEDEV_PSAUX=y
+-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
+-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024
+-CONFIG_INPUT_JOYDEV=m
+-CONFIG_INPUT_EVDEV=m
+-# CONFIG_INPUT_EVBUG is not set
+-
+-#
+-# Input Device Drivers
+-#
+-CONFIG_INPUT_KEYBOARD=y
+-CONFIG_KEYBOARD_ATKBD=y
+-# CONFIG_KEYBOARD_SUNKBD is not set
+-# CONFIG_KEYBOARD_LKKBD is not set
+-# CONFIG_KEYBOARD_XTKBD is not set
+-# CONFIG_KEYBOARD_NEWTON is not set
+-# CONFIG_KEYBOARD_STOWAWAY is not set
+-CONFIG_INPUT_MOUSE=y
+-CONFIG_MOUSE_PS2=y
+-CONFIG_MOUSE_PS2_ALPS=y
+-CONFIG_MOUSE_PS2_LOGIPS2PP=y
+-CONFIG_MOUSE_PS2_SYNAPTICS=y
+-CONFIG_MOUSE_PS2_LIFEBOOK=y
+-CONFIG_MOUSE_PS2_TRACKPOINT=y
+-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+-# CONFIG_MOUSE_SERIAL is not set
+-# CONFIG_MOUSE_APPLETOUCH is not set
+-# CONFIG_MOUSE_VSXXXAA is not set
+-# CONFIG_INPUT_JOYSTICK is not set
+-# CONFIG_INPUT_TABLET is not set
+-# CONFIG_INPUT_TOUCHSCREEN is not set
+-# CONFIG_INPUT_MISC is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-CONFIG_SERIO=y
+-CONFIG_SERIO_I8042=y
+-CONFIG_SERIO_SERPORT=y
+-# CONFIG_SERIO_PARKBD is not set
+-# CONFIG_SERIO_PCIPS2 is not set
+-CONFIG_SERIO_LIBPS2=y
+-# CONFIG_SERIO_RAW is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-# CONFIG_NOZOMI is not set
+-
+-#
+-# Serial drivers
+-#
+-# CONFIG_SERIAL_8250 is not set
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-CONFIG_SERIAL_CPM=y
+-CONFIG_SERIAL_CPM_CONSOLE=y
+-# CONFIG_SERIAL_CPM_SCC1 is not set
+-CONFIG_SERIAL_CPM_SCC2=y
+-# CONFIG_SERIAL_CPM_SCC3 is not set
+-# CONFIG_SERIAL_CPM_SCC4 is not set
+-# CONFIG_SERIAL_CPM_SMC1 is not set
+-# CONFIG_SERIAL_CPM_SMC2 is not set
+-# CONFIG_SERIAL_JSM is not set
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-CONFIG_PRINTER=m
+-# CONFIG_LP_CONSOLE is not set
+-# CONFIG_PPDEV is not set
+-# CONFIG_IPMI_HANDLER is not set
+-CONFIG_HW_RANDOM=m
+-# CONFIG_NVRAM is not set
+-# CONFIG_GEN_RTC is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_APPLICOM is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_DEVPORT=y
+-CONFIG_I2C=m
+-CONFIG_I2C_BOARDINFO=y
+-CONFIG_I2C_CHARDEV=m
+-
+-#
+-# I2C Algorithms
+-#
+-CONFIG_I2C_ALGOBIT=m
+-# CONFIG_I2C_ALGOPCF is not set
+-# CONFIG_I2C_ALGOPCA is not set
+-
+-#
+-# I2C Hardware Bus support
+-#
+-# CONFIG_I2C_ALI1535 is not set
+-# CONFIG_I2C_ALI1563 is not set
+-# CONFIG_I2C_ALI15X3 is not set
+-# CONFIG_I2C_AMD756 is not set
+-# CONFIG_I2C_AMD8111 is not set
+-# CONFIG_I2C_I801 is not set
+-# CONFIG_I2C_I810 is not set
+-# CONFIG_I2C_PIIX4 is not set
+-# CONFIG_I2C_MPC is not set
+-# CONFIG_I2C_NFORCE2 is not set
+-# CONFIG_I2C_OCORES is not set
+-# CONFIG_I2C_PARPORT is not set
+-# CONFIG_I2C_PARPORT_LIGHT is not set
+-# CONFIG_I2C_PROSAVAGE is not set
+-# CONFIG_I2C_SAVAGE4 is not set
+-# CONFIG_I2C_SIMTEC is not set
+-# CONFIG_I2C_SIS5595 is not set
+-# CONFIG_I2C_SIS630 is not set
+-# CONFIG_I2C_SIS96X is not set
+-# CONFIG_I2C_TAOS_EVM is not set
+-# CONFIG_I2C_STUB is not set
+-# CONFIG_I2C_VIA is not set
+-# CONFIG_I2C_VIAPRO is not set
+-# CONFIG_I2C_VOODOO3 is not set
+-
+-#
+-# Miscellaneous I2C Chip support
+-#
+-# CONFIG_DS1682 is not set
+-# CONFIG_SENSORS_EEPROM is not set
+-# CONFIG_SENSORS_PCF8574 is not set
+-# CONFIG_PCF8575 is not set
+-# CONFIG_SENSORS_PCF8591 is not set
+-# CONFIG_TPS65010 is not set
+-# CONFIG_SENSORS_MAX6875 is not set
+-# CONFIG_SENSORS_TSL2550 is not set
+-# CONFIG_I2C_DEBUG_CORE is not set
+-# CONFIG_I2C_DEBUG_ALGO is not set
+-# CONFIG_I2C_DEBUG_BUS is not set
+-# CONFIG_I2C_DEBUG_CHIP is not set
+-
+-#
+-# SPI support
+-#
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-CONFIG_HWMON=y
+-# CONFIG_HWMON_VID is not set
+-# CONFIG_SENSORS_AD7418 is not set
+-# CONFIG_SENSORS_ADM1021 is not set
+-# CONFIG_SENSORS_ADM1025 is not set
+-# CONFIG_SENSORS_ADM1026 is not set
+-# CONFIG_SENSORS_ADM1029 is not set
+-# CONFIG_SENSORS_ADM1031 is not set
+-# CONFIG_SENSORS_ADM9240 is not set
+-# CONFIG_SENSORS_ADT7470 is not set
+-# CONFIG_SENSORS_ADT7473 is not set
+-# CONFIG_SENSORS_ATXP1 is not set
+-# CONFIG_SENSORS_DS1621 is not set
+-# CONFIG_SENSORS_I5K_AMB is not set
+-# CONFIG_SENSORS_F71805F is not set
+-# CONFIG_SENSORS_F71882FG is not set
+-# CONFIG_SENSORS_F75375S is not set
+-# CONFIG_SENSORS_GL518SM is not set
+-# CONFIG_SENSORS_GL520SM is not set
+-# CONFIG_SENSORS_IT87 is not set
+-# CONFIG_SENSORS_LM63 is not set
+-# CONFIG_SENSORS_LM75 is not set
+-# CONFIG_SENSORS_LM77 is not set
+-# CONFIG_SENSORS_LM78 is not set
+-# CONFIG_SENSORS_LM80 is not set
+-# CONFIG_SENSORS_LM83 is not set
+-# CONFIG_SENSORS_LM85 is not set
+-# CONFIG_SENSORS_LM87 is not set
+-# CONFIG_SENSORS_LM90 is not set
+-# CONFIG_SENSORS_LM92 is not set
+-# CONFIG_SENSORS_LM93 is not set
+-# CONFIG_SENSORS_MAX1619 is not set
+-# CONFIG_SENSORS_MAX6650 is not set
+-# CONFIG_SENSORS_PC87360 is not set
+-# CONFIG_SENSORS_PC87427 is not set
+-# CONFIG_SENSORS_SIS5595 is not set
+-# CONFIG_SENSORS_DME1737 is not set
+-# CONFIG_SENSORS_SMSC47M1 is not set
+-# CONFIG_SENSORS_SMSC47M192 is not set
+-# CONFIG_SENSORS_SMSC47B397 is not set
+-# CONFIG_SENSORS_ADS7828 is not set
+-# CONFIG_SENSORS_THMC50 is not set
+-# CONFIG_SENSORS_VIA686A is not set
+-# CONFIG_SENSORS_VT1211 is not set
+-# CONFIG_SENSORS_VT8231 is not set
+-# CONFIG_SENSORS_W83781D is not set
+-# CONFIG_SENSORS_W83791D is not set
+-# CONFIG_SENSORS_W83792D is not set
+-# CONFIG_SENSORS_W83793 is not set
+-# CONFIG_SENSORS_W83L785TS is not set
+-# CONFIG_SENSORS_W83L786NG is not set
+-# CONFIG_SENSORS_W83627HF is not set
+-# CONFIG_SENSORS_W83627EHF is not set
+-# CONFIG_HWMON_DEBUG_CHIP is not set
+-# CONFIG_THERMAL is not set
+-# CONFIG_WATCHDOG is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-CONFIG_DAB=y
+-
+-#
+-# Graphics support
+-#
+-CONFIG_AGP=m
+-CONFIG_DRM=m
+-# CONFIG_DRM_TDFX is not set
+-# CONFIG_DRM_R128 is not set
+-# CONFIG_DRM_RADEON is not set
+-# CONFIG_DRM_MGA is not set
+-# CONFIG_DRM_SIS is not set
+-# CONFIG_DRM_VIA is not set
+-# CONFIG_DRM_SAVAGE is not set
+-# CONFIG_VGASTATE is not set
+-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-CONFIG_SOUND=m
+-
+-#
+-# Advanced Linux Sound Architecture
+-#
+-# CONFIG_SND is not set
+-
+-#
+-# Open Sound System
+-#
+-# CONFIG_SOUND_PRIME is not set
+-CONFIG_HID_SUPPORT=y
+-CONFIG_HID=y
+-# CONFIG_HID_DEBUG is not set
+-# CONFIG_HIDRAW is not set
+-CONFIG_USB_SUPPORT=y
+-CONFIG_USB_ARCH_HAS_HCD=y
+-CONFIG_USB_ARCH_HAS_OHCI=y
+-CONFIG_USB_ARCH_HAS_EHCI=y
+-# CONFIG_USB is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_INFINIBAND is not set
+-# CONFIG_EDAC is not set
+-# CONFIG_RTC_CLASS is not set
+-# CONFIG_DMADEVICES is not set
+-# CONFIG_AUXDISPLAY is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=y
+-CONFIG_EXT3_FS_XATTR=y
+-# CONFIG_EXT3_FS_POSIX_ACL is not set
+-# CONFIG_EXT3_FS_SECURITY is not set
+-# CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=y
+-CONFIG_FS_MBCACHE=y
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-CONFIG_AUTOFS_FS=m
+-CONFIG_AUTOFS4_FS=y
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-CONFIG_ISO9660_FS=m
+-# CONFIG_JOLIET is not set
+-# CONFIG_ZISOFS is not set
+-CONFIG_UDF_FS=m
+-CONFIG_UDF_NLS=y
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-CONFIG_FAT_FS=m
+-CONFIG_MSDOS_FS=m
+-CONFIG_VFAT_FS=m
+-CONFIG_FAT_DEFAULT_CODEPAGE=437
+-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-# CONFIG_PROC_KCORE is not set
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-CONFIG_CRAMFS=m
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-CONFIG_NFS_V3=y
+-# CONFIG_NFS_V3_ACL is not set
+-# CONFIG_NFS_V4 is not set
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_LOCKD_V4=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-# CONFIG_RPCSEC_GSS_KRB5 is not set
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-CONFIG_SMB_FS=m
+-# CONFIG_SMB_NLS_DEFAULT is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-# CONFIG_PARTITION_ADVANCED is not set
+-CONFIG_MSDOS_PARTITION=y
+-CONFIG_NLS=y
+-CONFIG_NLS_DEFAULT="iso8859-1"
+-# CONFIG_NLS_CODEPAGE_437 is not set
+-# CONFIG_NLS_CODEPAGE_737 is not set
+-# CONFIG_NLS_CODEPAGE_775 is not set
+-# CONFIG_NLS_CODEPAGE_850 is not set
+-# CONFIG_NLS_CODEPAGE_852 is not set
+-# CONFIG_NLS_CODEPAGE_855 is not set
+-# CONFIG_NLS_CODEPAGE_857 is not set
+-# CONFIG_NLS_CODEPAGE_860 is not set
+-# CONFIG_NLS_CODEPAGE_861 is not set
+-# CONFIG_NLS_CODEPAGE_862 is not set
+-# CONFIG_NLS_CODEPAGE_863 is not set
+-# CONFIG_NLS_CODEPAGE_864 is not set
+-# CONFIG_NLS_CODEPAGE_865 is not set
+-# CONFIG_NLS_CODEPAGE_866 is not set
+-# CONFIG_NLS_CODEPAGE_869 is not set
+-# CONFIG_NLS_CODEPAGE_936 is not set
+-# CONFIG_NLS_CODEPAGE_950 is not set
+-# CONFIG_NLS_CODEPAGE_932 is not set
+-# CONFIG_NLS_CODEPAGE_949 is not set
+-# CONFIG_NLS_CODEPAGE_874 is not set
+-# CONFIG_NLS_ISO8859_8 is not set
+-# CONFIG_NLS_CODEPAGE_1250 is not set
+-# CONFIG_NLS_CODEPAGE_1251 is not set
+-# CONFIG_NLS_ASCII is not set
+-# CONFIG_NLS_ISO8859_1 is not set
+-# CONFIG_NLS_ISO8859_2 is not set
+-# CONFIG_NLS_ISO8859_3 is not set
+-# CONFIG_NLS_ISO8859_4 is not set
+-# CONFIG_NLS_ISO8859_5 is not set
+-# CONFIG_NLS_ISO8859_6 is not set
+-# CONFIG_NLS_ISO8859_7 is not set
+-# CONFIG_NLS_ISO8859_9 is not set
+-# CONFIG_NLS_ISO8859_13 is not set
+-# CONFIG_NLS_ISO8859_14 is not set
+-# CONFIG_NLS_ISO8859_15 is not set
+-# CONFIG_NLS_KOI8_R is not set
+-# CONFIG_NLS_KOI8_U is not set
+-# CONFIG_NLS_UTF8 is not set
+-# CONFIG_DLM is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-CONFIG_CRC_CCITT=y
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_ZLIB_INFLATE=m
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-# CONFIG_MAGIC_SYSRQ is not set
+-# CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
+-# CONFIG_HEADERS_CHECK is not set
+-CONFIG_DEBUG_KERNEL=y
+-# CONFIG_DEBUG_SHIRQ is not set
+-CONFIG_DETECT_SOFTLOCKUP=y
+-CONFIG_SCHED_DEBUG=y
+-# CONFIG_SCHEDSTATS is not set
+-# CONFIG_TIMER_STATS is not set
+-# CONFIG_SLUB_DEBUG_ON is not set
+-# CONFIG_SLUB_STATS is not set
+-# CONFIG_DEBUG_RT_MUTEXES is not set
+-# CONFIG_RT_MUTEX_TESTER is not set
+-# CONFIG_DEBUG_SPINLOCK is not set
+-# CONFIG_DEBUG_MUTEXES is not set
+-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+-# CONFIG_DEBUG_KOBJECT is not set
+-# CONFIG_DEBUG_HIGHMEM is not set
+-# CONFIG_DEBUG_BUGVERBOSE is not set
+-# CONFIG_DEBUG_INFO is not set
+-# CONFIG_DEBUG_VM is not set
+-# CONFIG_DEBUG_LIST is not set
+-# CONFIG_DEBUG_SG is not set
+-# CONFIG_BOOT_PRINTK_DELAY is not set
+-# CONFIG_RCU_TORTURE_TEST is not set
+-# CONFIG_BACKTRACE_SELF_TEST is not set
+-# CONFIG_FAULT_INJECTION is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_DEBUG_STACKOVERFLOW is not set
+-# CONFIG_DEBUG_STACK_USAGE is not set
+-# CONFIG_DEBUG_PAGEALLOC is not set
+-# CONFIG_DEBUGGER is not set
+-# CONFIG_KGDB_CONSOLE is not set
+-CONFIG_BDI_SWITCH=y
+-# CONFIG_PPC_EARLY_DEBUG is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-# CONFIG_CRYPTO_MANAGER is not set
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-# CONFIG_CRYPTO_MD5 is not set
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-# CONFIG_CRYPTO_ECB is not set
+-# CONFIG_CRYPTO_CBC is not set
+-# CONFIG_CRYPTO_PCBC is not set
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-# CONFIG_CRYPTO_DES is not set
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_TEST is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+-# CONFIG_PPC_CLOCK is not set
+-CONFIG_PPC_LIB_RHEAP=y
+--- a/arch/powerpc/configs/taishan_defconfig
++++ /dev/null
+@@ -1,815 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc2
+-# Fri Feb 15 21:40:44 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-# CONFIG_6xx is not set
+-# CONFIG_PPC_85xx is not set
+-# CONFIG_PPC_8xx is not set
+-# CONFIG_40x is not set
+-CONFIG_44x=y
+-# CONFIG_E200 is not set
+-CONFIG_4xx=y
+-CONFIG_BOOKE=y
+-CONFIG_PTE_64BIT=y
+-CONFIG_PHYS_64BIT=y
+-# CONFIG_PPC_MM_SLICES is not set
+-CONFIG_NOT_COHERENT_CACHE=y
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-# CONFIG_DEFAULT_UIMAGE is not set
+-CONFIG_PPC_DCR_NATIVE=y
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_PPC_DCR=y
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-CONFIG_POSIX_MQUEUE=y
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-CONFIG_FAIR_GROUP_SCHED=y
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-CONFIG_KALLSYMS=y
+-# CONFIG_KALLSYMS_ALL is not set
+-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-CONFIG_EPOLL=y
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLUB_DEBUG=y
+-# CONFIG_SLAB is not set
+-CONFIG_SLUB=y
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-# CONFIG_KPROBES is not set
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-CONFIG_MODULES=y
+-CONFIG_MODULE_UNLOAD=y
+-# CONFIG_MODULE_FORCE_UNLOAD is not set
+-# CONFIG_MODVERSIONS is not set
+-# CONFIG_MODULE_SRCVERSION_ALL is not set
+-CONFIG_KMOD=y
+-CONFIG_BLOCK=y
+-CONFIG_LBD=y
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-# CONFIG_PREEMPT_RCU is not set
+-# CONFIG_PPC4xx_PCI_EXPRESS is not set
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-# CONFIG_BAMBOO is not set
+-# CONFIG_EBONY is not set
+-# CONFIG_SEQUOIA is not set
+-CONFIG_TAISHAN=y
+-# CONFIG_KATMAI is not set
+-# CONFIG_RAINIER is not set
+-# CONFIG_WARP is not set
+-CONFIG_440GX=y
+-# CONFIG_IPIC is not set
+-# CONFIG_MPIC is not set
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-# CONFIG_FSL_ULI1575 is not set
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-# CONFIG_TICK_ONESHOT is not set
+-# CONFIG_NO_HZ is not set
+-# CONFIG_HIGH_RES_TIMERS is not set
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_RCU_TRACE=y
+-CONFIG_BINFMT_ELF=y
+-# CONFIG_BINFMT_MISC is not set
+-# CONFIG_MATH_EMULATION is not set
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-CONFIG_RESOURCES_64BIT=y
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-CONFIG_PROC_DEVICETREE=y
+-CONFIG_CMDLINE_BOOL=y
+-CONFIG_CMDLINE=""
+-CONFIG_SECCOMP=y
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_PCI=y
+-CONFIG_PCI_DOMAINS=y
+-CONFIG_PCI_SYSCALL=y
+-# CONFIG_PCIEPORTBUS is not set
+-CONFIG_ARCH_SUPPORTS_MSI=y
+-# CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
+-# CONFIG_PCI_DEBUG is not set
+-# CONFIG_PCCARD is not set
+-# CONFIG_HOTPLUG_PCI is not set
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_CONSISTENT_START=0xff100000
+-CONFIG_CONSISTENT_SIZE=0x00200000
+-CONFIG_BOOT_LOAD=0x01000000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-# CONFIG_IP_MULTICAST is not set
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_ARPD is not set
+-# CONFIG_SYN_COOKIES is not set
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_BEET is not set
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-CONFIG_FW_LOADER=y
+-# CONFIG_DEBUG_DRIVER is not set
+-# CONFIG_DEBUG_DEVRES is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-CONFIG_CONNECTOR=y
+-CONFIG_PROC_EVENTS=y
+-# CONFIG_MTD is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_CPQ_DA is not set
+-# CONFIG_BLK_CPQ_CISS_DA is not set
+-# CONFIG_BLK_DEV_DAC960 is not set
+-# CONFIG_BLK_DEV_UMEM is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-# CONFIG_BLK_DEV_LOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-# CONFIG_BLK_DEV_SX8 is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=35000
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-# CONFIG_XILINX_SYSACE is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_PHANTOM is not set
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_SGI_IOC4 is not set
+-# CONFIG_TIFM_CORE is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-# CONFIG_IDE is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-# CONFIG_SCSI is not set
+-# CONFIG_SCSI_DMA is not set
+-# CONFIG_SCSI_NETLINK is not set
+-# CONFIG_ATA is not set
+-# CONFIG_MD is not set
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-# CONFIG_FIREWIRE is not set
+-# CONFIG_IEEE1394 is not set
+-# CONFIG_I2O is not set
+-CONFIG_MACINTOSH_DRIVERS=y
+-# CONFIG_MAC_EMUMOUSEBTN is not set
+-# CONFIG_WINDFARM is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_ARCNET is not set
+-# CONFIG_PHYLIB is not set
+-CONFIG_NET_ETHERNET=y
+-# CONFIG_MII is not set
+-# CONFIG_HAPPYMEAL is not set
+-# CONFIG_SUNGEM is not set
+-# CONFIG_CASSINI is not set
+-# CONFIG_NET_VENDOR_3COM is not set
+-# CONFIG_NET_TULIP is not set
+-# CONFIG_HP100 is not set
+-CONFIG_IBM_NEW_EMAC=y
+-CONFIG_IBM_NEW_EMAC_RXB=128
+-CONFIG_IBM_NEW_EMAC_TXB=64
+-CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+-CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+-CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+-# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+-CONFIG_IBM_NEW_EMAC_ZMII=y
+-CONFIG_IBM_NEW_EMAC_RGMII=y
+-CONFIG_IBM_NEW_EMAC_TAH=y
+-CONFIG_IBM_NEW_EMAC_EMAC4=y
+-# CONFIG_NET_PCI is not set
+-# CONFIG_B44 is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_ACENIC is not set
+-# CONFIG_DL2K is not set
+-# CONFIG_E1000 is not set
+-# CONFIG_E1000E is not set
+-# CONFIG_E1000E_ENABLED is not set
+-# CONFIG_IP1000 is not set
+-# CONFIG_IGB is not set
+-# CONFIG_NS83820 is not set
+-# CONFIG_HAMACHI is not set
+-# CONFIG_YELLOWFIN is not set
+-# CONFIG_R8169 is not set
+-# CONFIG_SIS190 is not set
+-# CONFIG_SKGE is not set
+-# CONFIG_SKY2 is not set
+-# CONFIG_SK98LIN is not set
+-# CONFIG_VIA_VELOCITY is not set
+-# CONFIG_TIGON3 is not set
+-# CONFIG_BNX2 is not set
+-# CONFIG_QLA3XXX is not set
+-# CONFIG_ATL1 is not set
+-CONFIG_NETDEV_10000=y
+-# CONFIG_CHELSIO_T1 is not set
+-# CONFIG_CHELSIO_T3 is not set
+-# CONFIG_IXGBE is not set
+-# CONFIG_IXGB is not set
+-# CONFIG_S2IO is not set
+-# CONFIG_MYRI10GE is not set
+-# CONFIG_NETXEN_NIC is not set
+-# CONFIG_NIU is not set
+-# CONFIG_MLX4_CORE is not set
+-# CONFIG_TEHUTI is not set
+-# CONFIG_BNX2X is not set
+-# CONFIG_TR is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-# CONFIG_WAN is not set
+-# CONFIG_FDDI is not set
+-# CONFIG_HIPPI is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-# CONFIG_INPUT is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-# CONFIG_NOZOMI is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-# CONFIG_SERIAL_8250_PCI is not set
+-CONFIG_SERIAL_8250_NR_UARTS=4
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-CONFIG_SERIAL_8250_EXTENDED=y
+-# CONFIG_SERIAL_8250_MANY_PORTS is not set
+-CONFIG_SERIAL_8250_SHARE_IRQ=y
+-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+-# CONFIG_SERIAL_8250_RSA is not set
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_JSM is not set
+-CONFIG_SERIAL_OF_PLATFORM=y
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-# CONFIG_HW_RANDOM is not set
+-# CONFIG_NVRAM is not set
+-# CONFIG_GEN_RTC is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_APPLICOM is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_DEVPORT=y
+-# CONFIG_I2C is not set
+-
+-#
+-# SPI support
+-#
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-# CONFIG_HWMON is not set
+-CONFIG_THERMAL=y
+-# CONFIG_WATCHDOG is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-CONFIG_DAB=y
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_AGP is not set
+-# CONFIG_DRM is not set
+-# CONFIG_VGASTATE is not set
+-CONFIG_VIDEO_OUTPUT_CONTROL=m
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-CONFIG_USB_SUPPORT=y
+-CONFIG_USB_ARCH_HAS_HCD=y
+-CONFIG_USB_ARCH_HAS_OHCI=y
+-CONFIG_USB_ARCH_HAS_EHCI=y
+-# CONFIG_USB is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_INFINIBAND is not set
+-# CONFIG_EDAC is not set
+-# CONFIG_RTC_CLASS is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-# CONFIG_EXT3_FS is not set
+-# CONFIG_EXT4DEV_FS is not set
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-# CONFIG_MSDOS_FS is not set
+-# CONFIG_VFAT_FS is not set
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-CONFIG_CRAMFS=y
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-CONFIG_NFS_V3=y
+-# CONFIG_NFS_V3_ACL is not set
+-# CONFIG_NFS_V4 is not set
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_LOCKD_V4=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-# CONFIG_RPCSEC_GSS_KRB5 is not set
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-# CONFIG_PARTITION_ADVANCED is not set
+-CONFIG_MSDOS_PARTITION=y
+-# CONFIG_NLS is not set
+-# CONFIG_DLM is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_ZLIB_INFLATE=y
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-CONFIG_MAGIC_SYSRQ=y
+-# CONFIG_UNUSED_SYMBOLS is not set
+-CONFIG_DEBUG_FS=y
+-# CONFIG_HEADERS_CHECK is not set
+-CONFIG_DEBUG_KERNEL=y
+-# CONFIG_DEBUG_SHIRQ is not set
+-CONFIG_DETECT_SOFTLOCKUP=y
+-CONFIG_SCHED_DEBUG=y
+-# CONFIG_SCHEDSTATS is not set
+-# CONFIG_TIMER_STATS is not set
+-# CONFIG_SLUB_DEBUG_ON is not set
+-# CONFIG_SLUB_STATS is not set
+-# CONFIG_DEBUG_RT_MUTEXES is not set
+-# CONFIG_RT_MUTEX_TESTER is not set
+-# CONFIG_DEBUG_SPINLOCK is not set
+-# CONFIG_DEBUG_MUTEXES is not set
+-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+-# CONFIG_DEBUG_KOBJECT is not set
+-# CONFIG_DEBUG_BUGVERBOSE is not set
+-# CONFIG_DEBUG_INFO is not set
+-# CONFIG_DEBUG_VM is not set
+-# CONFIG_DEBUG_LIST is not set
+-# CONFIG_DEBUG_SG is not set
+-# CONFIG_BOOT_PRINTK_DELAY is not set
+-# CONFIG_RCU_TORTURE_TEST is not set
+-# CONFIG_BACKTRACE_SELF_TEST is not set
+-# CONFIG_FAULT_INJECTION is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_DEBUG_STACKOVERFLOW is not set
+-# CONFIG_DEBUG_STACK_USAGE is not set
+-# CONFIG_DEBUG_PAGEALLOC is not set
+-CONFIG_DEBUGGER=y
+-# CONFIG_KGDB is not set
+-# CONFIG_XMON is not set
+-# CONFIG_VIRQ_DEBUG is not set
+-# CONFIG_BDI_SWITCH is not set
+-# CONFIG_PPC_EARLY_DEBUG is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_BLKCIPHER=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-CONFIG_CRYPTO_MANAGER=y
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-CONFIG_CRYPTO_MD5=y
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-CONFIG_CRYPTO_ECB=y
+-CONFIG_CRYPTO_CBC=y
+-CONFIG_CRYPTO_PCBC=y
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-CONFIG_CRYPTO_DES=y
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_TEST is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+-# CONFIG_PPC_CLOCK is not set
+--- a/arch/powerpc/configs/tqm8540_defconfig
++++ /dev/null
+@@ -1,1097 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc6
+-# Mon Mar 24 08:48:43 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-# CONFIG_6xx is not set
+-CONFIG_PPC_85xx=y
+-# CONFIG_PPC_8xx is not set
+-# CONFIG_40x is not set
+-# CONFIG_44x is not set
+-# CONFIG_E200 is not set
+-CONFIG_E500=y
+-CONFIG_BOOKE=y
+-CONFIG_FSL_BOOKE=y
+-CONFIG_FSL_EMB_PERFMON=y
+-# CONFIG_PHYS_64BIT is not set
+-CONFIG_SPE=y
+-# CONFIG_PPC_MM_SLICES is not set
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-CONFIG_DEFAULT_UIMAGE=y
+-# CONFIG_PPC_DCR_NATIVE is not set
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-# CONFIG_POSIX_MQUEUE is not set
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-CONFIG_FAIR_GROUP_SCHED=y
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-CONFIG_SYSFS_DEPRECATED_V2=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-# CONFIG_KALLSYMS is not set
+-# CONFIG_HOTPLUG is not set
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-# CONFIG_EPOLL is not set
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLUB_DEBUG=y
+-# CONFIG_SLAB is not set
+-CONFIG_SLUB=y
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_HAVE_KRETPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-# CONFIG_MODULES is not set
+-CONFIG_BLOCK=y
+-# CONFIG_LBD is not set
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-CONFIG_MPC85xx=y
+-# CONFIG_MPC8540_ADS is not set
+-# CONFIG_MPC8560_ADS is not set
+-# CONFIG_MPC85xx_CDS is not set
+-# CONFIG_MPC85xx_MDS is not set
+-# CONFIG_MPC85xx_DS is not set
+-# CONFIG_STX_GP3 is not set
+-CONFIG_TQM8540=y
+-# CONFIG_TQM8541 is not set
+-# CONFIG_TQM8555 is not set
+-# CONFIG_TQM8560 is not set
+-# CONFIG_SBC8548 is not set
+-# CONFIG_SBC8560 is not set
+-CONFIG_TQM85xx=y
+-# CONFIG_IPIC is not set
+-CONFIG_MPIC=y
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-# CONFIG_CPM2 is not set
+-CONFIG_PPC_CPM_NEW_BINDING=y
+-# CONFIG_FSL_ULI1575 is not set
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-# CONFIG_TICK_ONESHOT is not set
+-# CONFIG_NO_HZ is not set
+-# CONFIG_HIGH_RES_TIMERS is not set
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_BINFMT_ELF=y
+-# CONFIG_BINFMT_MISC is not set
+-CONFIG_MATH_EMULATION=y
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_RESOURCES_64BIT is not set
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-# CONFIG_PROC_DEVICETREE is not set
+-# CONFIG_CMDLINE_BOOL is not set
+-# CONFIG_PM is not set
+-CONFIG_SECCOMP=y
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_FSL_SOC=y
+-CONFIG_FSL_PCI=y
+-CONFIG_PCI=y
+-CONFIG_PCI_DOMAINS=y
+-CONFIG_PCI_SYSCALL=y
+-# CONFIG_PCIEPORTBUS is not set
+-CONFIG_ARCH_SUPPORTS_MSI=y
+-# CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_BOOT_LOAD=0x00800000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-CONFIG_XFRM=y
+-# CONFIG_XFRM_USER is not set
+-# CONFIG_XFRM_SUB_POLICY is not set
+-# CONFIG_XFRM_MIGRATE is not set
+-# CONFIG_XFRM_STATISTICS is not set
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-CONFIG_IP_MULTICAST=y
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_IP_MROUTE is not set
+-# CONFIG_ARPD is not set
+-CONFIG_SYN_COOKIES=y
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-CONFIG_INET_XFRM_MODE_TRANSPORT=y
+-CONFIG_INET_XFRM_MODE_TUNNEL=y
+-CONFIG_INET_XFRM_MODE_BEET=y
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-# CONFIG_SYS_HYPERVISOR is not set
+-# CONFIG_CONNECTOR is not set
+-CONFIG_MTD=y
+-# CONFIG_MTD_DEBUG is not set
+-CONFIG_MTD_CONCAT=y
+-CONFIG_MTD_PARTITIONS=y
+-# CONFIG_MTD_REDBOOT_PARTS is not set
+-CONFIG_MTD_CMDLINE_PARTS=y
+-# CONFIG_MTD_OF_PARTS is not set
+-
+-#
+-# User Modules And Translation Layers
+-#
+-CONFIG_MTD_CHAR=y
+-CONFIG_MTD_BLKDEVS=y
+-CONFIG_MTD_BLOCK=y
+-# CONFIG_FTL is not set
+-# CONFIG_NFTL is not set
+-# CONFIG_INFTL is not set
+-# CONFIG_RFD_FTL is not set
+-# CONFIG_SSFDC is not set
+-# CONFIG_MTD_OOPS is not set
+-
+-#
+-# RAM/ROM/Flash chip drivers
+-#
+-CONFIG_MTD_CFI=y
+-# CONFIG_MTD_JEDECPROBE is not set
+-CONFIG_MTD_GEN_PROBE=y
+-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+-CONFIG_MTD_MAP_BANK_WIDTH_1=y
+-CONFIG_MTD_MAP_BANK_WIDTH_2=y
+-CONFIG_MTD_MAP_BANK_WIDTH_4=y
+-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+-CONFIG_MTD_CFI_I1=y
+-CONFIG_MTD_CFI_I2=y
+-# CONFIG_MTD_CFI_I4 is not set
+-# CONFIG_MTD_CFI_I8 is not set
+-# CONFIG_MTD_CFI_INTELEXT is not set
+-CONFIG_MTD_CFI_AMDSTD=y
+-# CONFIG_MTD_CFI_STAA is not set
+-CONFIG_MTD_CFI_UTIL=y
+-# CONFIG_MTD_RAM is not set
+-# CONFIG_MTD_ROM is not set
+-# CONFIG_MTD_ABSENT is not set
+-
+-#
+-# Mapping drivers for chip access
+-#
+-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+-# CONFIG_MTD_PHYSMAP is not set
+-# CONFIG_MTD_PHYSMAP_OF is not set
+-# CONFIG_MTD_INTEL_VR_NOR is not set
+-# CONFIG_MTD_PLATRAM is not set
+-
+-#
+-# Self-contained MTD device drivers
+-#
+-# CONFIG_MTD_PMC551 is not set
+-# CONFIG_MTD_SLRAM is not set
+-# CONFIG_MTD_PHRAM is not set
+-# CONFIG_MTD_MTDRAM is not set
+-# CONFIG_MTD_BLOCK2MTD is not set
+-
+-#
+-# Disk-On-Chip Device Drivers
+-#
+-# CONFIG_MTD_DOC2000 is not set
+-# CONFIG_MTD_DOC2001 is not set
+-# CONFIG_MTD_DOC2001PLUS is not set
+-# CONFIG_MTD_NAND is not set
+-# CONFIG_MTD_ONENAND is not set
+-
+-#
+-# UBI - Unsorted block images
+-#
+-# CONFIG_MTD_UBI is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_CPQ_DA is not set
+-# CONFIG_BLK_CPQ_CISS_DA is not set
+-# CONFIG_BLK_DEV_DAC960 is not set
+-# CONFIG_BLK_DEV_UMEM is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-CONFIG_BLK_DEV_LOOP=y
+-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-# CONFIG_BLK_DEV_SX8 is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=32768
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_PHANTOM is not set
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_SGI_IOC4 is not set
+-# CONFIG_TIFM_CORE is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-CONFIG_IDE=y
+-CONFIG_IDE_MAX_HWIFS=4
+-CONFIG_BLK_DEV_IDE=y
+-
+-#
+-# Please see Documentation/ide/ide.txt for help/info on IDE drives
+-#
+-# CONFIG_BLK_DEV_IDE_SATA is not set
+-CONFIG_BLK_DEV_IDEDISK=y
+-# CONFIG_IDEDISK_MULTI_MODE is not set
+-# CONFIG_BLK_DEV_IDECD is not set
+-# CONFIG_BLK_DEV_IDETAPE is not set
+-# CONFIG_BLK_DEV_IDEFLOPPY is not set
+-# CONFIG_IDE_TASK_IOCTL is not set
+-CONFIG_IDE_PROC_FS=y
+-
+-#
+-# IDE chipset support/bugfixes
+-#
+-CONFIG_IDE_GENERIC=y
+-# CONFIG_BLK_DEV_PLATFORM is not set
+-CONFIG_BLK_DEV_IDEDMA_SFF=y
+-
+-#
+-# PCI IDE chipsets support
+-#
+-CONFIG_BLK_DEV_IDEPCI=y
+-CONFIG_IDEPCI_PCIBUS_ORDER=y
+-# CONFIG_BLK_DEV_OFFBOARD is not set
+-CONFIG_BLK_DEV_GENERIC=y
+-# CONFIG_BLK_DEV_OPTI621 is not set
+-CONFIG_BLK_DEV_IDEDMA_PCI=y
+-# CONFIG_BLK_DEV_AEC62XX is not set
+-# CONFIG_BLK_DEV_ALI15X3 is not set
+-# CONFIG_BLK_DEV_AMD74XX is not set
+-# CONFIG_BLK_DEV_CMD64X is not set
+-# CONFIG_BLK_DEV_TRIFLEX is not set
+-# CONFIG_BLK_DEV_CY82C693 is not set
+-# CONFIG_BLK_DEV_CS5520 is not set
+-# CONFIG_BLK_DEV_CS5530 is not set
+-# CONFIG_BLK_DEV_HPT34X is not set
+-# CONFIG_BLK_DEV_HPT366 is not set
+-# CONFIG_BLK_DEV_JMICRON is not set
+-# CONFIG_BLK_DEV_SC1200 is not set
+-# CONFIG_BLK_DEV_PIIX is not set
+-# CONFIG_BLK_DEV_IT8213 is not set
+-# CONFIG_BLK_DEV_IT821X is not set
+-# CONFIG_BLK_DEV_NS87415 is not set
+-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+-# CONFIG_BLK_DEV_SVWKS is not set
+-# CONFIG_BLK_DEV_SIIMAGE is not set
+-# CONFIG_BLK_DEV_SL82C105 is not set
+-# CONFIG_BLK_DEV_SLC90E66 is not set
+-# CONFIG_BLK_DEV_TRM290 is not set
+-CONFIG_BLK_DEV_VIA82CXXX=y
+-# CONFIG_BLK_DEV_TC86C001 is not set
+-CONFIG_BLK_DEV_IDEDMA=y
+-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+-# CONFIG_BLK_DEV_HD is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-# CONFIG_SCSI is not set
+-# CONFIG_SCSI_DMA is not set
+-# CONFIG_SCSI_NETLINK is not set
+-# CONFIG_ATA is not set
+-# CONFIG_MD is not set
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-# CONFIG_FIREWIRE is not set
+-# CONFIG_IEEE1394 is not set
+-# CONFIG_I2O is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_ARCNET is not set
+-CONFIG_PHYLIB=y
+-
+-#
+-# MII PHY device drivers
+-#
+-# CONFIG_MARVELL_PHY is not set
+-# CONFIG_DAVICOM_PHY is not set
+-# CONFIG_QSEMI_PHY is not set
+-# CONFIG_LXT_PHY is not set
+-# CONFIG_CICADA_PHY is not set
+-# CONFIG_VITESSE_PHY is not set
+-# CONFIG_SMSC_PHY is not set
+-# CONFIG_BROADCOM_PHY is not set
+-# CONFIG_ICPLUS_PHY is not set
+-# CONFIG_REALTEK_PHY is not set
+-# CONFIG_FIXED_PHY is not set
+-# CONFIG_MDIO_BITBANG is not set
+-CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
+-# CONFIG_HAPPYMEAL is not set
+-# CONFIG_SUNGEM is not set
+-# CONFIG_CASSINI is not set
+-# CONFIG_NET_VENDOR_3COM is not set
+-# CONFIG_NET_TULIP is not set
+-# CONFIG_HP100 is not set
+-# CONFIG_IBM_NEW_EMAC_ZMII is not set
+-# CONFIG_IBM_NEW_EMAC_RGMII is not set
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-CONFIG_NET_PCI=y
+-# CONFIG_PCNET32 is not set
+-# CONFIG_AMD8111_ETH is not set
+-# CONFIG_ADAPTEC_STARFIRE is not set
+-# CONFIG_B44 is not set
+-# CONFIG_FORCEDETH is not set
+-# CONFIG_EEPRO100 is not set
+-CONFIG_E100=y
+-# CONFIG_FEALNX is not set
+-# CONFIG_NATSEMI is not set
+-# CONFIG_NE2K_PCI is not set
+-# CONFIG_8139CP is not set
+-# CONFIG_8139TOO is not set
+-# CONFIG_R6040 is not set
+-# CONFIG_SIS900 is not set
+-# CONFIG_EPIC100 is not set
+-# CONFIG_SUNDANCE is not set
+-# CONFIG_TLAN is not set
+-# CONFIG_VIA_RHINE is not set
+-# CONFIG_SC92031 is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_ACENIC is not set
+-# CONFIG_DL2K is not set
+-# CONFIG_E1000 is not set
+-# CONFIG_E1000E is not set
+-# CONFIG_E1000E_ENABLED is not set
+-# CONFIG_IP1000 is not set
+-# CONFIG_IGB is not set
+-# CONFIG_NS83820 is not set
+-# CONFIG_HAMACHI is not set
+-# CONFIG_YELLOWFIN is not set
+-# CONFIG_R8169 is not set
+-# CONFIG_SIS190 is not set
+-# CONFIG_SKGE is not set
+-# CONFIG_SKY2 is not set
+-# CONFIG_SK98LIN is not set
+-# CONFIG_VIA_VELOCITY is not set
+-# CONFIG_TIGON3 is not set
+-# CONFIG_BNX2 is not set
+-CONFIG_GIANFAR=y
+-CONFIG_GFAR_NAPI=y
+-# CONFIG_QLA3XXX is not set
+-# CONFIG_ATL1 is not set
+-CONFIG_NETDEV_10000=y
+-# CONFIG_CHELSIO_T1 is not set
+-# CONFIG_CHELSIO_T3 is not set
+-# CONFIG_IXGBE is not set
+-# CONFIG_IXGB is not set
+-# CONFIG_S2IO is not set
+-# CONFIG_MYRI10GE is not set
+-# CONFIG_NETXEN_NIC is not set
+-# CONFIG_NIU is not set
+-# CONFIG_MLX4_CORE is not set
+-# CONFIG_TEHUTI is not set
+-# CONFIG_BNX2X is not set
+-# CONFIG_TR is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-# CONFIG_WAN is not set
+-# CONFIG_FDDI is not set
+-# CONFIG_HIPPI is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-CONFIG_INPUT=y
+-# CONFIG_INPUT_FF_MEMLESS is not set
+-# CONFIG_INPUT_POLLDEV is not set
+-
+-#
+-# Userland interfaces
+-#
+-# CONFIG_INPUT_MOUSEDEV is not set
+-# CONFIG_INPUT_JOYDEV is not set
+-# CONFIG_INPUT_EVDEV is not set
+-# CONFIG_INPUT_EVBUG is not set
+-
+-#
+-# Input Device Drivers
+-#
+-# CONFIG_INPUT_KEYBOARD is not set
+-# CONFIG_INPUT_MOUSE is not set
+-# CONFIG_INPUT_JOYSTICK is not set
+-# CONFIG_INPUT_TABLET is not set
+-# CONFIG_INPUT_TOUCHSCREEN is not set
+-# CONFIG_INPUT_MISC is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-# CONFIG_NOZOMI is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-CONFIG_SERIAL_8250_PCI=y
+-CONFIG_SERIAL_8250_NR_UARTS=4
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-# CONFIG_SERIAL_8250_EXTENDED is not set
+-CONFIG_SERIAL_8250_SHARE_IRQ=y
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_JSM is not set
+-# CONFIG_SERIAL_OF_PLATFORM is not set
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-CONFIG_HW_RANDOM=y
+-# CONFIG_NVRAM is not set
+-CONFIG_GEN_RTC=y
+-# CONFIG_GEN_RTC_X is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_APPLICOM is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_DEVPORT=y
+-CONFIG_I2C=y
+-CONFIG_I2C_BOARDINFO=y
+-CONFIG_I2C_CHARDEV=y
+-
+-#
+-# I2C Algorithms
+-#
+-# CONFIG_I2C_ALGOBIT is not set
+-# CONFIG_I2C_ALGOPCF is not set
+-# CONFIG_I2C_ALGOPCA is not set
+-
+-#
+-# I2C Hardware Bus support
+-#
+-# CONFIG_I2C_ALI1535 is not set
+-# CONFIG_I2C_ALI1563 is not set
+-# CONFIG_I2C_ALI15X3 is not set
+-# CONFIG_I2C_AMD756 is not set
+-# CONFIG_I2C_AMD8111 is not set
+-# CONFIG_I2C_I801 is not set
+-# CONFIG_I2C_I810 is not set
+-# CONFIG_I2C_PIIX4 is not set
+-CONFIG_I2C_MPC=y
+-# CONFIG_I2C_NFORCE2 is not set
+-# CONFIG_I2C_OCORES is not set
+-# CONFIG_I2C_PARPORT_LIGHT is not set
+-# CONFIG_I2C_PROSAVAGE is not set
+-# CONFIG_I2C_SAVAGE4 is not set
+-# CONFIG_I2C_SIMTEC is not set
+-# CONFIG_I2C_SIS5595 is not set
+-# CONFIG_I2C_SIS630 is not set
+-# CONFIG_I2C_SIS96X is not set
+-# CONFIG_I2C_TAOS_EVM is not set
+-# CONFIG_I2C_VIA is not set
+-# CONFIG_I2C_VIAPRO is not set
+-# CONFIG_I2C_VOODOO3 is not set
+-
+-#
+-# Miscellaneous I2C Chip support
+-#
+-# CONFIG_DS1682 is not set
+-# CONFIG_SENSORS_EEPROM is not set
+-# CONFIG_SENSORS_PCF8574 is not set
+-# CONFIG_PCF8575 is not set
+-# CONFIG_SENSORS_PCF8591 is not set
+-# CONFIG_TPS65010 is not set
+-# CONFIG_SENSORS_MAX6875 is not set
+-# CONFIG_SENSORS_TSL2550 is not set
+-# CONFIG_I2C_DEBUG_CORE is not set
+-# CONFIG_I2C_DEBUG_ALGO is not set
+-# CONFIG_I2C_DEBUG_BUS is not set
+-# CONFIG_I2C_DEBUG_CHIP is not set
+-
+-#
+-# SPI support
+-#
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-CONFIG_HWMON=y
+-# CONFIG_HWMON_VID is not set
+-# CONFIG_SENSORS_AD7418 is not set
+-# CONFIG_SENSORS_ADM1021 is not set
+-# CONFIG_SENSORS_ADM1025 is not set
+-# CONFIG_SENSORS_ADM1026 is not set
+-# CONFIG_SENSORS_ADM1029 is not set
+-# CONFIG_SENSORS_ADM1031 is not set
+-# CONFIG_SENSORS_ADM9240 is not set
+-# CONFIG_SENSORS_ADT7470 is not set
+-# CONFIG_SENSORS_ADT7473 is not set
+-# CONFIG_SENSORS_ATXP1 is not set
+-# CONFIG_SENSORS_DS1621 is not set
+-# CONFIG_SENSORS_I5K_AMB is not set
+-# CONFIG_SENSORS_F71805F is not set
+-# CONFIG_SENSORS_F71882FG is not set
+-# CONFIG_SENSORS_F75375S is not set
+-# CONFIG_SENSORS_GL518SM is not set
+-# CONFIG_SENSORS_GL520SM is not set
+-# CONFIG_SENSORS_IT87 is not set
+-# CONFIG_SENSORS_LM63 is not set
+-CONFIG_SENSORS_LM75=y
+-# CONFIG_SENSORS_LM77 is not set
+-# CONFIG_SENSORS_LM78 is not set
+-# CONFIG_SENSORS_LM80 is not set
+-# CONFIG_SENSORS_LM83 is not set
+-# CONFIG_SENSORS_LM85 is not set
+-# CONFIG_SENSORS_LM87 is not set
+-# CONFIG_SENSORS_LM90 is not set
+-# CONFIG_SENSORS_LM92 is not set
+-# CONFIG_SENSORS_LM93 is not set
+-# CONFIG_SENSORS_MAX1619 is not set
+-# CONFIG_SENSORS_MAX6650 is not set
+-# CONFIG_SENSORS_PC87360 is not set
+-# CONFIG_SENSORS_PC87427 is not set
+-# CONFIG_SENSORS_SIS5595 is not set
+-# CONFIG_SENSORS_DME1737 is not set
+-# CONFIG_SENSORS_SMSC47M1 is not set
+-# CONFIG_SENSORS_SMSC47M192 is not set
+-# CONFIG_SENSORS_SMSC47B397 is not set
+-# CONFIG_SENSORS_ADS7828 is not set
+-# CONFIG_SENSORS_THMC50 is not set
+-# CONFIG_SENSORS_VIA686A is not set
+-# CONFIG_SENSORS_VT1211 is not set
+-# CONFIG_SENSORS_VT8231 is not set
+-# CONFIG_SENSORS_W83781D is not set
+-# CONFIG_SENSORS_W83791D is not set
+-# CONFIG_SENSORS_W83792D is not set
+-# CONFIG_SENSORS_W83793 is not set
+-# CONFIG_SENSORS_W83L785TS is not set
+-# CONFIG_SENSORS_W83L786NG is not set
+-# CONFIG_SENSORS_W83627HF is not set
+-# CONFIG_SENSORS_W83627EHF is not set
+-CONFIG_HWMON_DEBUG_CHIP=y
+-# CONFIG_THERMAL is not set
+-# CONFIG_WATCHDOG is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-CONFIG_DAB=y
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_AGP is not set
+-# CONFIG_DRM is not set
+-# CONFIG_VGASTATE is not set
+-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-CONFIG_HID_SUPPORT=y
+-CONFIG_HID=y
+-# CONFIG_HID_DEBUG is not set
+-# CONFIG_HIDRAW is not set
+-CONFIG_USB_SUPPORT=y
+-CONFIG_USB_ARCH_HAS_HCD=y
+-CONFIG_USB_ARCH_HAS_OHCI=y
+-CONFIG_USB_ARCH_HAS_EHCI=y
+-# CONFIG_USB is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_INFINIBAND is not set
+-# CONFIG_EDAC is not set
+-# CONFIG_RTC_CLASS is not set
+-# CONFIG_DMADEVICES is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=y
+-CONFIG_EXT3_FS_XATTR=y
+-# CONFIG_EXT3_FS_POSIX_ACL is not set
+-# CONFIG_EXT3_FS_SECURITY is not set
+-# CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=y
+-CONFIG_FS_MBCACHE=y
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-# CONFIG_MSDOS_FS is not set
+-# CONFIG_VFAT_FS is not set
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-CONFIG_JFFS2_FS=y
+-CONFIG_JFFS2_FS_DEBUG=0
+-CONFIG_JFFS2_FS_WRITEBUFFER=y
+-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+-# CONFIG_JFFS2_SUMMARY is not set
+-# CONFIG_JFFS2_FS_XATTR is not set
+-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+-CONFIG_JFFS2_ZLIB=y
+-# CONFIG_JFFS2_LZO is not set
+-CONFIG_JFFS2_RTIME=y
+-# CONFIG_JFFS2_RUBIN is not set
+-CONFIG_CRAMFS=y
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-# CONFIG_NFS_V3 is not set
+-# CONFIG_NFS_V4 is not set
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-# CONFIG_RPCSEC_GSS_KRB5 is not set
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-CONFIG_PARTITION_ADVANCED=y
+-# CONFIG_ACORN_PARTITION is not set
+-# CONFIG_OSF_PARTITION is not set
+-# CONFIG_AMIGA_PARTITION is not set
+-# CONFIG_ATARI_PARTITION is not set
+-# CONFIG_MAC_PARTITION is not set
+-# CONFIG_MSDOS_PARTITION is not set
+-# CONFIG_LDM_PARTITION is not set
+-# CONFIG_SGI_PARTITION is not set
+-# CONFIG_ULTRIX_PARTITION is not set
+-# CONFIG_SUN_PARTITION is not set
+-# CONFIG_KARMA_PARTITION is not set
+-# CONFIG_EFI_PARTITION is not set
+-# CONFIG_SYSV68_PARTITION is not set
+-# CONFIG_NLS is not set
+-# CONFIG_DLM is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_ZLIB_INFLATE=y
+-CONFIG_ZLIB_DEFLATE=y
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-# CONFIG_MAGIC_SYSRQ is not set
+-# CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
+-# CONFIG_HEADERS_CHECK is not set
+-# CONFIG_DEBUG_KERNEL is not set
+-# CONFIG_SLUB_DEBUG_ON is not set
+-# CONFIG_SLUB_STATS is not set
+-# CONFIG_DEBUG_BUGVERBOSE is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_PPC_EARLY_DEBUG is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-# CONFIG_CRYPTO_MANAGER is not set
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-# CONFIG_CRYPTO_MD5 is not set
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-# CONFIG_CRYPTO_ECB is not set
+-# CONFIG_CRYPTO_CBC is not set
+-# CONFIG_CRYPTO_PCBC is not set
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-# CONFIG_CRYPTO_DES is not set
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+-# CONFIG_PPC_CLOCK is not set
+--- a/arch/powerpc/configs/tqm8541_defconfig
++++ /dev/null
+@@ -1,1109 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc6
+-# Mon Mar 24 08:48:44 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-# CONFIG_6xx is not set
+-CONFIG_PPC_85xx=y
+-# CONFIG_PPC_8xx is not set
+-# CONFIG_40x is not set
+-# CONFIG_44x is not set
+-# CONFIG_E200 is not set
+-CONFIG_E500=y
+-CONFIG_BOOKE=y
+-CONFIG_FSL_BOOKE=y
+-CONFIG_FSL_EMB_PERFMON=y
+-# CONFIG_PHYS_64BIT is not set
+-CONFIG_SPE=y
+-# CONFIG_PPC_MM_SLICES is not set
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-CONFIG_DEFAULT_UIMAGE=y
+-# CONFIG_PPC_DCR_NATIVE is not set
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-# CONFIG_POSIX_MQUEUE is not set
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-CONFIG_FAIR_GROUP_SCHED=y
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-CONFIG_SYSFS_DEPRECATED_V2=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-# CONFIG_KALLSYMS is not set
+-# CONFIG_HOTPLUG is not set
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-# CONFIG_EPOLL is not set
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLUB_DEBUG=y
+-# CONFIG_SLAB is not set
+-CONFIG_SLUB=y
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_HAVE_KRETPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-# CONFIG_MODULES is not set
+-CONFIG_BLOCK=y
+-# CONFIG_LBD is not set
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-CONFIG_MPC85xx=y
+-# CONFIG_MPC8540_ADS is not set
+-# CONFIG_MPC8560_ADS is not set
+-# CONFIG_MPC85xx_CDS is not set
+-# CONFIG_MPC85xx_MDS is not set
+-# CONFIG_MPC85xx_DS is not set
+-# CONFIG_STX_GP3 is not set
+-# CONFIG_TQM8540 is not set
+-CONFIG_TQM8541=y
+-# CONFIG_TQM8555 is not set
+-# CONFIG_TQM8560 is not set
+-# CONFIG_SBC8548 is not set
+-# CONFIG_SBC8560 is not set
+-CONFIG_TQM85xx=y
+-# CONFIG_IPIC is not set
+-CONFIG_MPIC=y
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-CONFIG_CPM2=y
+-CONFIG_PPC_CPM_NEW_BINDING=y
+-# CONFIG_FSL_ULI1575 is not set
+-CONFIG_CPM=y
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-# CONFIG_TICK_ONESHOT is not set
+-# CONFIG_NO_HZ is not set
+-# CONFIG_HIGH_RES_TIMERS is not set
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_BINFMT_ELF=y
+-# CONFIG_BINFMT_MISC is not set
+-CONFIG_MATH_EMULATION=y
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_RESOURCES_64BIT is not set
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-# CONFIG_PROC_DEVICETREE is not set
+-# CONFIG_CMDLINE_BOOL is not set
+-# CONFIG_PM is not set
+-CONFIG_SECCOMP=y
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_FSL_SOC=y
+-CONFIG_FSL_PCI=y
+-CONFIG_PCI=y
+-CONFIG_PCI_DOMAINS=y
+-CONFIG_PCI_SYSCALL=y
+-# CONFIG_PCIEPORTBUS is not set
+-CONFIG_ARCH_SUPPORTS_MSI=y
+-# CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_BOOT_LOAD=0x00800000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-CONFIG_XFRM=y
+-# CONFIG_XFRM_USER is not set
+-# CONFIG_XFRM_SUB_POLICY is not set
+-# CONFIG_XFRM_MIGRATE is not set
+-# CONFIG_XFRM_STATISTICS is not set
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-CONFIG_IP_MULTICAST=y
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_IP_MROUTE is not set
+-# CONFIG_ARPD is not set
+-CONFIG_SYN_COOKIES=y
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-CONFIG_INET_XFRM_MODE_TRANSPORT=y
+-CONFIG_INET_XFRM_MODE_TUNNEL=y
+-CONFIG_INET_XFRM_MODE_BEET=y
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-# CONFIG_SYS_HYPERVISOR is not set
+-# CONFIG_CONNECTOR is not set
+-CONFIG_MTD=y
+-# CONFIG_MTD_DEBUG is not set
+-CONFIG_MTD_CONCAT=y
+-CONFIG_MTD_PARTITIONS=y
+-# CONFIG_MTD_REDBOOT_PARTS is not set
+-CONFIG_MTD_CMDLINE_PARTS=y
+-# CONFIG_MTD_OF_PARTS is not set
+-
+-#
+-# User Modules And Translation Layers
+-#
+-CONFIG_MTD_CHAR=y
+-CONFIG_MTD_BLKDEVS=y
+-CONFIG_MTD_BLOCK=y
+-# CONFIG_FTL is not set
+-# CONFIG_NFTL is not set
+-# CONFIG_INFTL is not set
+-# CONFIG_RFD_FTL is not set
+-# CONFIG_SSFDC is not set
+-# CONFIG_MTD_OOPS is not set
+-
+-#
+-# RAM/ROM/Flash chip drivers
+-#
+-CONFIG_MTD_CFI=y
+-# CONFIG_MTD_JEDECPROBE is not set
+-CONFIG_MTD_GEN_PROBE=y
+-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+-CONFIG_MTD_MAP_BANK_WIDTH_1=y
+-CONFIG_MTD_MAP_BANK_WIDTH_2=y
+-CONFIG_MTD_MAP_BANK_WIDTH_4=y
+-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+-CONFIG_MTD_CFI_I1=y
+-CONFIG_MTD_CFI_I2=y
+-# CONFIG_MTD_CFI_I4 is not set
+-# CONFIG_MTD_CFI_I8 is not set
+-# CONFIG_MTD_CFI_INTELEXT is not set
+-CONFIG_MTD_CFI_AMDSTD=y
+-# CONFIG_MTD_CFI_STAA is not set
+-CONFIG_MTD_CFI_UTIL=y
+-# CONFIG_MTD_RAM is not set
+-# CONFIG_MTD_ROM is not set
+-# CONFIG_MTD_ABSENT is not set
+-
+-#
+-# Mapping drivers for chip access
+-#
+-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+-# CONFIG_MTD_PHYSMAP is not set
+-# CONFIG_MTD_PHYSMAP_OF is not set
+-# CONFIG_MTD_INTEL_VR_NOR is not set
+-# CONFIG_MTD_PLATRAM is not set
+-
+-#
+-# Self-contained MTD device drivers
+-#
+-# CONFIG_MTD_PMC551 is not set
+-# CONFIG_MTD_SLRAM is not set
+-# CONFIG_MTD_PHRAM is not set
+-# CONFIG_MTD_MTDRAM is not set
+-# CONFIG_MTD_BLOCK2MTD is not set
+-
+-#
+-# Disk-On-Chip Device Drivers
+-#
+-# CONFIG_MTD_DOC2000 is not set
+-# CONFIG_MTD_DOC2001 is not set
+-# CONFIG_MTD_DOC2001PLUS is not set
+-# CONFIG_MTD_NAND is not set
+-# CONFIG_MTD_ONENAND is not set
+-
+-#
+-# UBI - Unsorted block images
+-#
+-# CONFIG_MTD_UBI is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_CPQ_DA is not set
+-# CONFIG_BLK_CPQ_CISS_DA is not set
+-# CONFIG_BLK_DEV_DAC960 is not set
+-# CONFIG_BLK_DEV_UMEM is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-CONFIG_BLK_DEV_LOOP=y
+-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-# CONFIG_BLK_DEV_SX8 is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=32768
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_PHANTOM is not set
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_SGI_IOC4 is not set
+-# CONFIG_TIFM_CORE is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-CONFIG_IDE=y
+-CONFIG_IDE_MAX_HWIFS=4
+-CONFIG_BLK_DEV_IDE=y
+-
+-#
+-# Please see Documentation/ide/ide.txt for help/info on IDE drives
+-#
+-# CONFIG_BLK_DEV_IDE_SATA is not set
+-CONFIG_BLK_DEV_IDEDISK=y
+-# CONFIG_IDEDISK_MULTI_MODE is not set
+-# CONFIG_BLK_DEV_IDECD is not set
+-# CONFIG_BLK_DEV_IDETAPE is not set
+-# CONFIG_BLK_DEV_IDEFLOPPY is not set
+-# CONFIG_IDE_TASK_IOCTL is not set
+-CONFIG_IDE_PROC_FS=y
+-
+-#
+-# IDE chipset support/bugfixes
+-#
+-CONFIG_IDE_GENERIC=y
+-# CONFIG_BLK_DEV_PLATFORM is not set
+-CONFIG_BLK_DEV_IDEDMA_SFF=y
+-
+-#
+-# PCI IDE chipsets support
+-#
+-CONFIG_BLK_DEV_IDEPCI=y
+-CONFIG_IDEPCI_PCIBUS_ORDER=y
+-# CONFIG_BLK_DEV_OFFBOARD is not set
+-CONFIG_BLK_DEV_GENERIC=y
+-# CONFIG_BLK_DEV_OPTI621 is not set
+-CONFIG_BLK_DEV_IDEDMA_PCI=y
+-# CONFIG_BLK_DEV_AEC62XX is not set
+-# CONFIG_BLK_DEV_ALI15X3 is not set
+-# CONFIG_BLK_DEV_AMD74XX is not set
+-# CONFIG_BLK_DEV_CMD64X is not set
+-# CONFIG_BLK_DEV_TRIFLEX is not set
+-# CONFIG_BLK_DEV_CY82C693 is not set
+-# CONFIG_BLK_DEV_CS5520 is not set
+-# CONFIG_BLK_DEV_CS5530 is not set
+-# CONFIG_BLK_DEV_HPT34X is not set
+-# CONFIG_BLK_DEV_HPT366 is not set
+-# CONFIG_BLK_DEV_JMICRON is not set
+-# CONFIG_BLK_DEV_SC1200 is not set
+-# CONFIG_BLK_DEV_PIIX is not set
+-# CONFIG_BLK_DEV_IT8213 is not set
+-# CONFIG_BLK_DEV_IT821X is not set
+-# CONFIG_BLK_DEV_NS87415 is not set
+-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+-# CONFIG_BLK_DEV_SVWKS is not set
+-# CONFIG_BLK_DEV_SIIMAGE is not set
+-# CONFIG_BLK_DEV_SL82C105 is not set
+-# CONFIG_BLK_DEV_SLC90E66 is not set
+-# CONFIG_BLK_DEV_TRM290 is not set
+-CONFIG_BLK_DEV_VIA82CXXX=y
+-# CONFIG_BLK_DEV_TC86C001 is not set
+-CONFIG_BLK_DEV_IDEDMA=y
+-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+-# CONFIG_BLK_DEV_HD is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-# CONFIG_SCSI is not set
+-# CONFIG_SCSI_DMA is not set
+-# CONFIG_SCSI_NETLINK is not set
+-# CONFIG_ATA is not set
+-# CONFIG_MD is not set
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-# CONFIG_FIREWIRE is not set
+-# CONFIG_IEEE1394 is not set
+-# CONFIG_I2O is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_ARCNET is not set
+-CONFIG_PHYLIB=y
+-
+-#
+-# MII PHY device drivers
+-#
+-# CONFIG_MARVELL_PHY is not set
+-# CONFIG_DAVICOM_PHY is not set
+-# CONFIG_QSEMI_PHY is not set
+-# CONFIG_LXT_PHY is not set
+-# CONFIG_CICADA_PHY is not set
+-# CONFIG_VITESSE_PHY is not set
+-# CONFIG_SMSC_PHY is not set
+-# CONFIG_BROADCOM_PHY is not set
+-# CONFIG_ICPLUS_PHY is not set
+-# CONFIG_REALTEK_PHY is not set
+-# CONFIG_FIXED_PHY is not set
+-# CONFIG_MDIO_BITBANG is not set
+-CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
+-# CONFIG_HAPPYMEAL is not set
+-# CONFIG_SUNGEM is not set
+-# CONFIG_CASSINI is not set
+-# CONFIG_NET_VENDOR_3COM is not set
+-# CONFIG_NET_TULIP is not set
+-# CONFIG_HP100 is not set
+-# CONFIG_IBM_NEW_EMAC_ZMII is not set
+-# CONFIG_IBM_NEW_EMAC_RGMII is not set
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-CONFIG_NET_PCI=y
+-# CONFIG_PCNET32 is not set
+-# CONFIG_AMD8111_ETH is not set
+-# CONFIG_ADAPTEC_STARFIRE is not set
+-# CONFIG_B44 is not set
+-# CONFIG_FORCEDETH is not set
+-# CONFIG_EEPRO100 is not set
+-CONFIG_E100=y
+-# CONFIG_FEALNX is not set
+-# CONFIG_NATSEMI is not set
+-# CONFIG_NE2K_PCI is not set
+-# CONFIG_8139CP is not set
+-# CONFIG_8139TOO is not set
+-# CONFIG_R6040 is not set
+-# CONFIG_SIS900 is not set
+-# CONFIG_EPIC100 is not set
+-# CONFIG_SUNDANCE is not set
+-# CONFIG_TLAN is not set
+-# CONFIG_VIA_RHINE is not set
+-# CONFIG_SC92031 is not set
+-# CONFIG_FS_ENET is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_ACENIC is not set
+-# CONFIG_DL2K is not set
+-# CONFIG_E1000 is not set
+-# CONFIG_E1000E is not set
+-# CONFIG_E1000E_ENABLED is not set
+-# CONFIG_IP1000 is not set
+-# CONFIG_IGB is not set
+-# CONFIG_NS83820 is not set
+-# CONFIG_HAMACHI is not set
+-# CONFIG_YELLOWFIN is not set
+-# CONFIG_R8169 is not set
+-# CONFIG_SIS190 is not set
+-# CONFIG_SKGE is not set
+-# CONFIG_SKY2 is not set
+-# CONFIG_SK98LIN is not set
+-# CONFIG_VIA_VELOCITY is not set
+-# CONFIG_TIGON3 is not set
+-# CONFIG_BNX2 is not set
+-CONFIG_GIANFAR=y
+-CONFIG_GFAR_NAPI=y
+-# CONFIG_QLA3XXX is not set
+-# CONFIG_ATL1 is not set
+-CONFIG_NETDEV_10000=y
+-# CONFIG_CHELSIO_T1 is not set
+-# CONFIG_CHELSIO_T3 is not set
+-# CONFIG_IXGBE is not set
+-# CONFIG_IXGB is not set
+-# CONFIG_S2IO is not set
+-# CONFIG_MYRI10GE is not set
+-# CONFIG_NETXEN_NIC is not set
+-# CONFIG_NIU is not set
+-# CONFIG_MLX4_CORE is not set
+-# CONFIG_TEHUTI is not set
+-# CONFIG_BNX2X is not set
+-# CONFIG_TR is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-# CONFIG_WAN is not set
+-# CONFIG_FDDI is not set
+-# CONFIG_HIPPI is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-CONFIG_INPUT=y
+-# CONFIG_INPUT_FF_MEMLESS is not set
+-# CONFIG_INPUT_POLLDEV is not set
+-
+-#
+-# Userland interfaces
+-#
+-# CONFIG_INPUT_MOUSEDEV is not set
+-# CONFIG_INPUT_JOYDEV is not set
+-# CONFIG_INPUT_EVDEV is not set
+-# CONFIG_INPUT_EVBUG is not set
+-
+-#
+-# Input Device Drivers
+-#
+-# CONFIG_INPUT_KEYBOARD is not set
+-# CONFIG_INPUT_MOUSE is not set
+-# CONFIG_INPUT_JOYSTICK is not set
+-# CONFIG_INPUT_TABLET is not set
+-# CONFIG_INPUT_TOUCHSCREEN is not set
+-# CONFIG_INPUT_MISC is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-# CONFIG_NOZOMI is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-CONFIG_SERIAL_8250_PCI=y
+-CONFIG_SERIAL_8250_NR_UARTS=4
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-# CONFIG_SERIAL_8250_EXTENDED is not set
+-CONFIG_SERIAL_8250_SHARE_IRQ=y
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-CONFIG_SERIAL_CPM=y
+-CONFIG_SERIAL_CPM_CONSOLE=y
+-CONFIG_SERIAL_CPM_SCC1=y
+-# CONFIG_SERIAL_CPM_SCC2 is not set
+-# CONFIG_SERIAL_CPM_SCC3 is not set
+-# CONFIG_SERIAL_CPM_SCC4 is not set
+-# CONFIG_SERIAL_CPM_SMC1 is not set
+-# CONFIG_SERIAL_CPM_SMC2 is not set
+-# CONFIG_SERIAL_JSM is not set
+-# CONFIG_SERIAL_OF_PLATFORM is not set
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-CONFIG_HW_RANDOM=y
+-# CONFIG_NVRAM is not set
+-CONFIG_GEN_RTC=y
+-# CONFIG_GEN_RTC_X is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_APPLICOM is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_DEVPORT=y
+-CONFIG_I2C=y
+-CONFIG_I2C_BOARDINFO=y
+-CONFIG_I2C_CHARDEV=y
+-
+-#
+-# I2C Algorithms
+-#
+-# CONFIG_I2C_ALGOBIT is not set
+-# CONFIG_I2C_ALGOPCF is not set
+-# CONFIG_I2C_ALGOPCA is not set
+-
+-#
+-# I2C Hardware Bus support
+-#
+-# CONFIG_I2C_ALI1535 is not set
+-# CONFIG_I2C_ALI1563 is not set
+-# CONFIG_I2C_ALI15X3 is not set
+-# CONFIG_I2C_AMD756 is not set
+-# CONFIG_I2C_AMD8111 is not set
+-# CONFIG_I2C_I801 is not set
+-# CONFIG_I2C_I810 is not set
+-# CONFIG_I2C_PIIX4 is not set
+-CONFIG_I2C_MPC=y
+-# CONFIG_I2C_NFORCE2 is not set
+-# CONFIG_I2C_OCORES is not set
+-# CONFIG_I2C_PARPORT_LIGHT is not set
+-# CONFIG_I2C_PROSAVAGE is not set
+-# CONFIG_I2C_SAVAGE4 is not set
+-# CONFIG_I2C_SIMTEC is not set
+-# CONFIG_I2C_SIS5595 is not set
+-# CONFIG_I2C_SIS630 is not set
+-# CONFIG_I2C_SIS96X is not set
+-# CONFIG_I2C_TAOS_EVM is not set
+-# CONFIG_I2C_VIA is not set
+-# CONFIG_I2C_VIAPRO is not set
+-# CONFIG_I2C_VOODOO3 is not set
+-
+-#
+-# Miscellaneous I2C Chip support
+-#
+-# CONFIG_DS1682 is not set
+-# CONFIG_SENSORS_EEPROM is not set
+-# CONFIG_SENSORS_PCF8574 is not set
+-# CONFIG_PCF8575 is not set
+-# CONFIG_SENSORS_PCF8591 is not set
+-# CONFIG_TPS65010 is not set
+-# CONFIG_SENSORS_MAX6875 is not set
+-# CONFIG_SENSORS_TSL2550 is not set
+-# CONFIG_I2C_DEBUG_CORE is not set
+-# CONFIG_I2C_DEBUG_ALGO is not set
+-# CONFIG_I2C_DEBUG_BUS is not set
+-# CONFIG_I2C_DEBUG_CHIP is not set
+-
+-#
+-# SPI support
+-#
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-CONFIG_HWMON=y
+-# CONFIG_HWMON_VID is not set
+-# CONFIG_SENSORS_AD7418 is not set
+-# CONFIG_SENSORS_ADM1021 is not set
+-# CONFIG_SENSORS_ADM1025 is not set
+-# CONFIG_SENSORS_ADM1026 is not set
+-# CONFIG_SENSORS_ADM1029 is not set
+-# CONFIG_SENSORS_ADM1031 is not set
+-# CONFIG_SENSORS_ADM9240 is not set
+-# CONFIG_SENSORS_ADT7470 is not set
+-# CONFIG_SENSORS_ADT7473 is not set
+-# CONFIG_SENSORS_ATXP1 is not set
+-# CONFIG_SENSORS_DS1621 is not set
+-# CONFIG_SENSORS_I5K_AMB is not set
+-# CONFIG_SENSORS_F71805F is not set
+-# CONFIG_SENSORS_F71882FG is not set
+-# CONFIG_SENSORS_F75375S is not set
+-# CONFIG_SENSORS_GL518SM is not set
+-# CONFIG_SENSORS_GL520SM is not set
+-# CONFIG_SENSORS_IT87 is not set
+-# CONFIG_SENSORS_LM63 is not set
+-CONFIG_SENSORS_LM75=y
+-# CONFIG_SENSORS_LM77 is not set
+-# CONFIG_SENSORS_LM78 is not set
+-# CONFIG_SENSORS_LM80 is not set
+-# CONFIG_SENSORS_LM83 is not set
+-# CONFIG_SENSORS_LM85 is not set
+-# CONFIG_SENSORS_LM87 is not set
+-# CONFIG_SENSORS_LM90 is not set
+-# CONFIG_SENSORS_LM92 is not set
+-# CONFIG_SENSORS_LM93 is not set
+-# CONFIG_SENSORS_MAX1619 is not set
+-# CONFIG_SENSORS_MAX6650 is not set
+-# CONFIG_SENSORS_PC87360 is not set
+-# CONFIG_SENSORS_PC87427 is not set
+-# CONFIG_SENSORS_SIS5595 is not set
+-# CONFIG_SENSORS_DME1737 is not set
+-# CONFIG_SENSORS_SMSC47M1 is not set
+-# CONFIG_SENSORS_SMSC47M192 is not set
+-# CONFIG_SENSORS_SMSC47B397 is not set
+-# CONFIG_SENSORS_ADS7828 is not set
+-# CONFIG_SENSORS_THMC50 is not set
+-# CONFIG_SENSORS_VIA686A is not set
+-# CONFIG_SENSORS_VT1211 is not set
+-# CONFIG_SENSORS_VT8231 is not set
+-# CONFIG_SENSORS_W83781D is not set
+-# CONFIG_SENSORS_W83791D is not set
+-# CONFIG_SENSORS_W83792D is not set
+-# CONFIG_SENSORS_W83793 is not set
+-# CONFIG_SENSORS_W83L785TS is not set
+-# CONFIG_SENSORS_W83L786NG is not set
+-# CONFIG_SENSORS_W83627HF is not set
+-# CONFIG_SENSORS_W83627EHF is not set
+-CONFIG_HWMON_DEBUG_CHIP=y
+-# CONFIG_THERMAL is not set
+-# CONFIG_WATCHDOG is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-CONFIG_DAB=y
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_AGP is not set
+-# CONFIG_DRM is not set
+-# CONFIG_VGASTATE is not set
+-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-CONFIG_HID_SUPPORT=y
+-CONFIG_HID=y
+-# CONFIG_HID_DEBUG is not set
+-# CONFIG_HIDRAW is not set
+-CONFIG_USB_SUPPORT=y
+-CONFIG_USB_ARCH_HAS_HCD=y
+-CONFIG_USB_ARCH_HAS_OHCI=y
+-CONFIG_USB_ARCH_HAS_EHCI=y
+-# CONFIG_USB is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_INFINIBAND is not set
+-# CONFIG_EDAC is not set
+-# CONFIG_RTC_CLASS is not set
+-# CONFIG_DMADEVICES is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=y
+-CONFIG_EXT3_FS_XATTR=y
+-# CONFIG_EXT3_FS_POSIX_ACL is not set
+-# CONFIG_EXT3_FS_SECURITY is not set
+-# CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=y
+-CONFIG_FS_MBCACHE=y
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-# CONFIG_MSDOS_FS is not set
+-# CONFIG_VFAT_FS is not set
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-CONFIG_JFFS2_FS=y
+-CONFIG_JFFS2_FS_DEBUG=0
+-CONFIG_JFFS2_FS_WRITEBUFFER=y
+-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+-# CONFIG_JFFS2_SUMMARY is not set
+-# CONFIG_JFFS2_FS_XATTR is not set
+-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+-CONFIG_JFFS2_ZLIB=y
+-# CONFIG_JFFS2_LZO is not set
+-CONFIG_JFFS2_RTIME=y
+-# CONFIG_JFFS2_RUBIN is not set
+-CONFIG_CRAMFS=y
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-# CONFIG_NFS_V3 is not set
+-# CONFIG_NFS_V4 is not set
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-# CONFIG_RPCSEC_GSS_KRB5 is not set
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-CONFIG_PARTITION_ADVANCED=y
+-# CONFIG_ACORN_PARTITION is not set
+-# CONFIG_OSF_PARTITION is not set
+-# CONFIG_AMIGA_PARTITION is not set
+-# CONFIG_ATARI_PARTITION is not set
+-# CONFIG_MAC_PARTITION is not set
+-# CONFIG_MSDOS_PARTITION is not set
+-# CONFIG_LDM_PARTITION is not set
+-# CONFIG_SGI_PARTITION is not set
+-# CONFIG_ULTRIX_PARTITION is not set
+-# CONFIG_SUN_PARTITION is not set
+-# CONFIG_KARMA_PARTITION is not set
+-# CONFIG_EFI_PARTITION is not set
+-# CONFIG_SYSV68_PARTITION is not set
+-# CONFIG_NLS is not set
+-# CONFIG_DLM is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_ZLIB_INFLATE=y
+-CONFIG_ZLIB_DEFLATE=y
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-# CONFIG_MAGIC_SYSRQ is not set
+-# CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
+-# CONFIG_HEADERS_CHECK is not set
+-# CONFIG_DEBUG_KERNEL is not set
+-# CONFIG_SLUB_DEBUG_ON is not set
+-# CONFIG_SLUB_STATS is not set
+-# CONFIG_DEBUG_BUGVERBOSE is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_KGDB_CONSOLE is not set
+-# CONFIG_PPC_EARLY_DEBUG is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-# CONFIG_CRYPTO_MANAGER is not set
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-# CONFIG_CRYPTO_MD5 is not set
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-# CONFIG_CRYPTO_ECB is not set
+-# CONFIG_CRYPTO_CBC is not set
+-# CONFIG_CRYPTO_PCBC is not set
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-# CONFIG_CRYPTO_DES is not set
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+-# CONFIG_PPC_CLOCK is not set
+-CONFIG_PPC_LIB_RHEAP=y
+--- a/arch/powerpc/configs/tqm8555_defconfig
++++ /dev/null
+@@ -1,1109 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc6
+-# Mon Mar 24 08:48:44 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-# CONFIG_6xx is not set
+-CONFIG_PPC_85xx=y
+-# CONFIG_PPC_8xx is not set
+-# CONFIG_40x is not set
+-# CONFIG_44x is not set
+-# CONFIG_E200 is not set
+-CONFIG_E500=y
+-CONFIG_BOOKE=y
+-CONFIG_FSL_BOOKE=y
+-CONFIG_FSL_EMB_PERFMON=y
+-# CONFIG_PHYS_64BIT is not set
+-CONFIG_SPE=y
+-# CONFIG_PPC_MM_SLICES is not set
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-CONFIG_DEFAULT_UIMAGE=y
+-# CONFIG_PPC_DCR_NATIVE is not set
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-# CONFIG_POSIX_MQUEUE is not set
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-CONFIG_FAIR_GROUP_SCHED=y
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-CONFIG_SYSFS_DEPRECATED_V2=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-# CONFIG_KALLSYMS is not set
+-# CONFIG_HOTPLUG is not set
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-# CONFIG_EPOLL is not set
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLUB_DEBUG=y
+-# CONFIG_SLAB is not set
+-CONFIG_SLUB=y
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_HAVE_KRETPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-# CONFIG_MODULES is not set
+-CONFIG_BLOCK=y
+-# CONFIG_LBD is not set
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-CONFIG_MPC85xx=y
+-# CONFIG_MPC8540_ADS is not set
+-# CONFIG_MPC8560_ADS is not set
+-# CONFIG_MPC85xx_CDS is not set
+-# CONFIG_MPC85xx_MDS is not set
+-# CONFIG_MPC85xx_DS is not set
+-# CONFIG_STX_GP3 is not set
+-# CONFIG_TQM8540 is not set
+-# CONFIG_TQM8541 is not set
+-CONFIG_TQM8555=y
+-# CONFIG_TQM8560 is not set
+-# CONFIG_SBC8548 is not set
+-# CONFIG_SBC8560 is not set
+-CONFIG_TQM85xx=y
+-# CONFIG_IPIC is not set
+-CONFIG_MPIC=y
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-CONFIG_CPM2=y
+-CONFIG_PPC_CPM_NEW_BINDING=y
+-# CONFIG_FSL_ULI1575 is not set
+-CONFIG_CPM=y
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-# CONFIG_TICK_ONESHOT is not set
+-# CONFIG_NO_HZ is not set
+-# CONFIG_HIGH_RES_TIMERS is not set
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_BINFMT_ELF=y
+-# CONFIG_BINFMT_MISC is not set
+-CONFIG_MATH_EMULATION=y
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_RESOURCES_64BIT is not set
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-# CONFIG_PROC_DEVICETREE is not set
+-# CONFIG_CMDLINE_BOOL is not set
+-# CONFIG_PM is not set
+-CONFIG_SECCOMP=y
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_FSL_SOC=y
+-CONFIG_FSL_PCI=y
+-CONFIG_PCI=y
+-CONFIG_PCI_DOMAINS=y
+-CONFIG_PCI_SYSCALL=y
+-# CONFIG_PCIEPORTBUS is not set
+-CONFIG_ARCH_SUPPORTS_MSI=y
+-# CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_BOOT_LOAD=0x00800000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-CONFIG_XFRM=y
+-# CONFIG_XFRM_USER is not set
+-# CONFIG_XFRM_SUB_POLICY is not set
+-# CONFIG_XFRM_MIGRATE is not set
+-# CONFIG_XFRM_STATISTICS is not set
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-CONFIG_IP_MULTICAST=y
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_IP_MROUTE is not set
+-# CONFIG_ARPD is not set
+-CONFIG_SYN_COOKIES=y
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-CONFIG_INET_XFRM_MODE_TRANSPORT=y
+-CONFIG_INET_XFRM_MODE_TUNNEL=y
+-CONFIG_INET_XFRM_MODE_BEET=y
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-# CONFIG_SYS_HYPERVISOR is not set
+-# CONFIG_CONNECTOR is not set
+-CONFIG_MTD=y
+-# CONFIG_MTD_DEBUG is not set
+-CONFIG_MTD_CONCAT=y
+-CONFIG_MTD_PARTITIONS=y
+-# CONFIG_MTD_REDBOOT_PARTS is not set
+-CONFIG_MTD_CMDLINE_PARTS=y
+-# CONFIG_MTD_OF_PARTS is not set
+-
+-#
+-# User Modules And Translation Layers
+-#
+-CONFIG_MTD_CHAR=y
+-CONFIG_MTD_BLKDEVS=y
+-CONFIG_MTD_BLOCK=y
+-# CONFIG_FTL is not set
+-# CONFIG_NFTL is not set
+-# CONFIG_INFTL is not set
+-# CONFIG_RFD_FTL is not set
+-# CONFIG_SSFDC is not set
+-# CONFIG_MTD_OOPS is not set
+-
+-#
+-# RAM/ROM/Flash chip drivers
+-#
+-CONFIG_MTD_CFI=y
+-# CONFIG_MTD_JEDECPROBE is not set
+-CONFIG_MTD_GEN_PROBE=y
+-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+-CONFIG_MTD_MAP_BANK_WIDTH_1=y
+-CONFIG_MTD_MAP_BANK_WIDTH_2=y
+-CONFIG_MTD_MAP_BANK_WIDTH_4=y
+-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+-CONFIG_MTD_CFI_I1=y
+-CONFIG_MTD_CFI_I2=y
+-# CONFIG_MTD_CFI_I4 is not set
+-# CONFIG_MTD_CFI_I8 is not set
+-# CONFIG_MTD_CFI_INTELEXT is not set
+-CONFIG_MTD_CFI_AMDSTD=y
+-# CONFIG_MTD_CFI_STAA is not set
+-CONFIG_MTD_CFI_UTIL=y
+-# CONFIG_MTD_RAM is not set
+-# CONFIG_MTD_ROM is not set
+-# CONFIG_MTD_ABSENT is not set
+-
+-#
+-# Mapping drivers for chip access
+-#
+-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+-# CONFIG_MTD_PHYSMAP is not set
+-# CONFIG_MTD_PHYSMAP_OF is not set
+-# CONFIG_MTD_INTEL_VR_NOR is not set
+-# CONFIG_MTD_PLATRAM is not set
+-
+-#
+-# Self-contained MTD device drivers
+-#
+-# CONFIG_MTD_PMC551 is not set
+-# CONFIG_MTD_SLRAM is not set
+-# CONFIG_MTD_PHRAM is not set
+-# CONFIG_MTD_MTDRAM is not set
+-# CONFIG_MTD_BLOCK2MTD is not set
+-
+-#
+-# Disk-On-Chip Device Drivers
+-#
+-# CONFIG_MTD_DOC2000 is not set
+-# CONFIG_MTD_DOC2001 is not set
+-# CONFIG_MTD_DOC2001PLUS is not set
+-# CONFIG_MTD_NAND is not set
+-# CONFIG_MTD_ONENAND is not set
+-
+-#
+-# UBI - Unsorted block images
+-#
+-# CONFIG_MTD_UBI is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_CPQ_DA is not set
+-# CONFIG_BLK_CPQ_CISS_DA is not set
+-# CONFIG_BLK_DEV_DAC960 is not set
+-# CONFIG_BLK_DEV_UMEM is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-CONFIG_BLK_DEV_LOOP=y
+-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-# CONFIG_BLK_DEV_SX8 is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=32768
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_PHANTOM is not set
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_SGI_IOC4 is not set
+-# CONFIG_TIFM_CORE is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-CONFIG_IDE=y
+-CONFIG_IDE_MAX_HWIFS=4
+-CONFIG_BLK_DEV_IDE=y
+-
+-#
+-# Please see Documentation/ide/ide.txt for help/info on IDE drives
+-#
+-# CONFIG_BLK_DEV_IDE_SATA is not set
+-CONFIG_BLK_DEV_IDEDISK=y
+-# CONFIG_IDEDISK_MULTI_MODE is not set
+-# CONFIG_BLK_DEV_IDECD is not set
+-# CONFIG_BLK_DEV_IDETAPE is not set
+-# CONFIG_BLK_DEV_IDEFLOPPY is not set
+-# CONFIG_IDE_TASK_IOCTL is not set
+-CONFIG_IDE_PROC_FS=y
+-
+-#
+-# IDE chipset support/bugfixes
+-#
+-CONFIG_IDE_GENERIC=y
+-# CONFIG_BLK_DEV_PLATFORM is not set
+-CONFIG_BLK_DEV_IDEDMA_SFF=y
+-
+-#
+-# PCI IDE chipsets support
+-#
+-CONFIG_BLK_DEV_IDEPCI=y
+-CONFIG_IDEPCI_PCIBUS_ORDER=y
+-# CONFIG_BLK_DEV_OFFBOARD is not set
+-CONFIG_BLK_DEV_GENERIC=y
+-# CONFIG_BLK_DEV_OPTI621 is not set
+-CONFIG_BLK_DEV_IDEDMA_PCI=y
+-# CONFIG_BLK_DEV_AEC62XX is not set
+-# CONFIG_BLK_DEV_ALI15X3 is not set
+-# CONFIG_BLK_DEV_AMD74XX is not set
+-# CONFIG_BLK_DEV_CMD64X is not set
+-# CONFIG_BLK_DEV_TRIFLEX is not set
+-# CONFIG_BLK_DEV_CY82C693 is not set
+-# CONFIG_BLK_DEV_CS5520 is not set
+-# CONFIG_BLK_DEV_CS5530 is not set
+-# CONFIG_BLK_DEV_HPT34X is not set
+-# CONFIG_BLK_DEV_HPT366 is not set
+-# CONFIG_BLK_DEV_JMICRON is not set
+-# CONFIG_BLK_DEV_SC1200 is not set
+-# CONFIG_BLK_DEV_PIIX is not set
+-# CONFIG_BLK_DEV_IT8213 is not set
+-# CONFIG_BLK_DEV_IT821X is not set
+-# CONFIG_BLK_DEV_NS87415 is not set
+-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+-# CONFIG_BLK_DEV_SVWKS is not set
+-# CONFIG_BLK_DEV_SIIMAGE is not set
+-# CONFIG_BLK_DEV_SL82C105 is not set
+-# CONFIG_BLK_DEV_SLC90E66 is not set
+-# CONFIG_BLK_DEV_TRM290 is not set
+-CONFIG_BLK_DEV_VIA82CXXX=y
+-# CONFIG_BLK_DEV_TC86C001 is not set
+-CONFIG_BLK_DEV_IDEDMA=y
+-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+-# CONFIG_BLK_DEV_HD is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-# CONFIG_SCSI is not set
+-# CONFIG_SCSI_DMA is not set
+-# CONFIG_SCSI_NETLINK is not set
+-# CONFIG_ATA is not set
+-# CONFIG_MD is not set
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-# CONFIG_FIREWIRE is not set
+-# CONFIG_IEEE1394 is not set
+-# CONFIG_I2O is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_ARCNET is not set
+-CONFIG_PHYLIB=y
+-
+-#
+-# MII PHY device drivers
+-#
+-# CONFIG_MARVELL_PHY is not set
+-# CONFIG_DAVICOM_PHY is not set
+-# CONFIG_QSEMI_PHY is not set
+-# CONFIG_LXT_PHY is not set
+-# CONFIG_CICADA_PHY is not set
+-# CONFIG_VITESSE_PHY is not set
+-# CONFIG_SMSC_PHY is not set
+-# CONFIG_BROADCOM_PHY is not set
+-# CONFIG_ICPLUS_PHY is not set
+-# CONFIG_REALTEK_PHY is not set
+-# CONFIG_FIXED_PHY is not set
+-# CONFIG_MDIO_BITBANG is not set
+-CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
+-# CONFIG_HAPPYMEAL is not set
+-# CONFIG_SUNGEM is not set
+-# CONFIG_CASSINI is not set
+-# CONFIG_NET_VENDOR_3COM is not set
+-# CONFIG_NET_TULIP is not set
+-# CONFIG_HP100 is not set
+-# CONFIG_IBM_NEW_EMAC_ZMII is not set
+-# CONFIG_IBM_NEW_EMAC_RGMII is not set
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-CONFIG_NET_PCI=y
+-# CONFIG_PCNET32 is not set
+-# CONFIG_AMD8111_ETH is not set
+-# CONFIG_ADAPTEC_STARFIRE is not set
+-# CONFIG_B44 is not set
+-# CONFIG_FORCEDETH is not set
+-# CONFIG_EEPRO100 is not set
+-CONFIG_E100=y
+-# CONFIG_FEALNX is not set
+-# CONFIG_NATSEMI is not set
+-# CONFIG_NE2K_PCI is not set
+-# CONFIG_8139CP is not set
+-# CONFIG_8139TOO is not set
+-# CONFIG_R6040 is not set
+-# CONFIG_SIS900 is not set
+-# CONFIG_EPIC100 is not set
+-# CONFIG_SUNDANCE is not set
+-# CONFIG_TLAN is not set
+-# CONFIG_VIA_RHINE is not set
+-# CONFIG_SC92031 is not set
+-# CONFIG_FS_ENET is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_ACENIC is not set
+-# CONFIG_DL2K is not set
+-# CONFIG_E1000 is not set
+-# CONFIG_E1000E is not set
+-# CONFIG_E1000E_ENABLED is not set
+-# CONFIG_IP1000 is not set
+-# CONFIG_IGB is not set
+-# CONFIG_NS83820 is not set
+-# CONFIG_HAMACHI is not set
+-# CONFIG_YELLOWFIN is not set
+-# CONFIG_R8169 is not set
+-# CONFIG_SIS190 is not set
+-# CONFIG_SKGE is not set
+-# CONFIG_SKY2 is not set
+-# CONFIG_SK98LIN is not set
+-# CONFIG_VIA_VELOCITY is not set
+-# CONFIG_TIGON3 is not set
+-# CONFIG_BNX2 is not set
+-CONFIG_GIANFAR=y
+-CONFIG_GFAR_NAPI=y
+-# CONFIG_QLA3XXX is not set
+-# CONFIG_ATL1 is not set
+-CONFIG_NETDEV_10000=y
+-# CONFIG_CHELSIO_T1 is not set
+-# CONFIG_CHELSIO_T3 is not set
+-# CONFIG_IXGBE is not set
+-# CONFIG_IXGB is not set
+-# CONFIG_S2IO is not set
+-# CONFIG_MYRI10GE is not set
+-# CONFIG_NETXEN_NIC is not set
+-# CONFIG_NIU is not set
+-# CONFIG_MLX4_CORE is not set
+-# CONFIG_TEHUTI is not set
+-# CONFIG_BNX2X is not set
+-# CONFIG_TR is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-# CONFIG_WAN is not set
+-# CONFIG_FDDI is not set
+-# CONFIG_HIPPI is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-CONFIG_INPUT=y
+-# CONFIG_INPUT_FF_MEMLESS is not set
+-# CONFIG_INPUT_POLLDEV is not set
+-
+-#
+-# Userland interfaces
+-#
+-# CONFIG_INPUT_MOUSEDEV is not set
+-# CONFIG_INPUT_JOYDEV is not set
+-# CONFIG_INPUT_EVDEV is not set
+-# CONFIG_INPUT_EVBUG is not set
+-
+-#
+-# Input Device Drivers
+-#
+-# CONFIG_INPUT_KEYBOARD is not set
+-# CONFIG_INPUT_MOUSE is not set
+-# CONFIG_INPUT_JOYSTICK is not set
+-# CONFIG_INPUT_TABLET is not set
+-# CONFIG_INPUT_TOUCHSCREEN is not set
+-# CONFIG_INPUT_MISC is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-# CONFIG_NOZOMI is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-CONFIG_SERIAL_8250_PCI=y
+-CONFIG_SERIAL_8250_NR_UARTS=4
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-# CONFIG_SERIAL_8250_EXTENDED is not set
+-CONFIG_SERIAL_8250_SHARE_IRQ=y
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-CONFIG_SERIAL_CPM=y
+-CONFIG_SERIAL_CPM_CONSOLE=y
+-CONFIG_SERIAL_CPM_SCC1=y
+-# CONFIG_SERIAL_CPM_SCC2 is not set
+-# CONFIG_SERIAL_CPM_SCC3 is not set
+-# CONFIG_SERIAL_CPM_SCC4 is not set
+-# CONFIG_SERIAL_CPM_SMC1 is not set
+-# CONFIG_SERIAL_CPM_SMC2 is not set
+-# CONFIG_SERIAL_JSM is not set
+-# CONFIG_SERIAL_OF_PLATFORM is not set
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-CONFIG_HW_RANDOM=y
+-# CONFIG_NVRAM is not set
+-CONFIG_GEN_RTC=y
+-# CONFIG_GEN_RTC_X is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_APPLICOM is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_DEVPORT=y
+-CONFIG_I2C=y
+-CONFIG_I2C_BOARDINFO=y
+-CONFIG_I2C_CHARDEV=y
+-
+-#
+-# I2C Algorithms
+-#
+-# CONFIG_I2C_ALGOBIT is not set
+-# CONFIG_I2C_ALGOPCF is not set
+-# CONFIG_I2C_ALGOPCA is not set
+-
+-#
+-# I2C Hardware Bus support
+-#
+-# CONFIG_I2C_ALI1535 is not set
+-# CONFIG_I2C_ALI1563 is not set
+-# CONFIG_I2C_ALI15X3 is not set
+-# CONFIG_I2C_AMD756 is not set
+-# CONFIG_I2C_AMD8111 is not set
+-# CONFIG_I2C_I801 is not set
+-# CONFIG_I2C_I810 is not set
+-# CONFIG_I2C_PIIX4 is not set
+-CONFIG_I2C_MPC=y
+-# CONFIG_I2C_NFORCE2 is not set
+-# CONFIG_I2C_OCORES is not set
+-# CONFIG_I2C_PARPORT_LIGHT is not set
+-# CONFIG_I2C_PROSAVAGE is not set
+-# CONFIG_I2C_SAVAGE4 is not set
+-# CONFIG_I2C_SIMTEC is not set
+-# CONFIG_I2C_SIS5595 is not set
+-# CONFIG_I2C_SIS630 is not set
+-# CONFIG_I2C_SIS96X is not set
+-# CONFIG_I2C_TAOS_EVM is not set
+-# CONFIG_I2C_VIA is not set
+-# CONFIG_I2C_VIAPRO is not set
+-# CONFIG_I2C_VOODOO3 is not set
+-
+-#
+-# Miscellaneous I2C Chip support
+-#
+-# CONFIG_DS1682 is not set
+-# CONFIG_SENSORS_EEPROM is not set
+-# CONFIG_SENSORS_PCF8574 is not set
+-# CONFIG_PCF8575 is not set
+-# CONFIG_SENSORS_PCF8591 is not set
+-# CONFIG_TPS65010 is not set
+-# CONFIG_SENSORS_MAX6875 is not set
+-# CONFIG_SENSORS_TSL2550 is not set
+-# CONFIG_I2C_DEBUG_CORE is not set
+-# CONFIG_I2C_DEBUG_ALGO is not set
+-# CONFIG_I2C_DEBUG_BUS is not set
+-# CONFIG_I2C_DEBUG_CHIP is not set
+-
+-#
+-# SPI support
+-#
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-CONFIG_HWMON=y
+-# CONFIG_HWMON_VID is not set
+-# CONFIG_SENSORS_AD7418 is not set
+-# CONFIG_SENSORS_ADM1021 is not set
+-# CONFIG_SENSORS_ADM1025 is not set
+-# CONFIG_SENSORS_ADM1026 is not set
+-# CONFIG_SENSORS_ADM1029 is not set
+-# CONFIG_SENSORS_ADM1031 is not set
+-# CONFIG_SENSORS_ADM9240 is not set
+-# CONFIG_SENSORS_ADT7470 is not set
+-# CONFIG_SENSORS_ADT7473 is not set
+-# CONFIG_SENSORS_ATXP1 is not set
+-# CONFIG_SENSORS_DS1621 is not set
+-# CONFIG_SENSORS_I5K_AMB is not set
+-# CONFIG_SENSORS_F71805F is not set
+-# CONFIG_SENSORS_F71882FG is not set
+-# CONFIG_SENSORS_F75375S is not set
+-# CONFIG_SENSORS_GL518SM is not set
+-# CONFIG_SENSORS_GL520SM is not set
+-# CONFIG_SENSORS_IT87 is not set
+-# CONFIG_SENSORS_LM63 is not set
+-CONFIG_SENSORS_LM75=y
+-# CONFIG_SENSORS_LM77 is not set
+-# CONFIG_SENSORS_LM78 is not set
+-# CONFIG_SENSORS_LM80 is not set
+-# CONFIG_SENSORS_LM83 is not set
+-# CONFIG_SENSORS_LM85 is not set
+-# CONFIG_SENSORS_LM87 is not set
+-# CONFIG_SENSORS_LM90 is not set
+-# CONFIG_SENSORS_LM92 is not set
+-# CONFIG_SENSORS_LM93 is not set
+-# CONFIG_SENSORS_MAX1619 is not set
+-# CONFIG_SENSORS_MAX6650 is not set
+-# CONFIG_SENSORS_PC87360 is not set
+-# CONFIG_SENSORS_PC87427 is not set
+-# CONFIG_SENSORS_SIS5595 is not set
+-# CONFIG_SENSORS_DME1737 is not set
+-# CONFIG_SENSORS_SMSC47M1 is not set
+-# CONFIG_SENSORS_SMSC47M192 is not set
+-# CONFIG_SENSORS_SMSC47B397 is not set
+-# CONFIG_SENSORS_ADS7828 is not set
+-# CONFIG_SENSORS_THMC50 is not set
+-# CONFIG_SENSORS_VIA686A is not set
+-# CONFIG_SENSORS_VT1211 is not set
+-# CONFIG_SENSORS_VT8231 is not set
+-# CONFIG_SENSORS_W83781D is not set
+-# CONFIG_SENSORS_W83791D is not set
+-# CONFIG_SENSORS_W83792D is not set
+-# CONFIG_SENSORS_W83793 is not set
+-# CONFIG_SENSORS_W83L785TS is not set
+-# CONFIG_SENSORS_W83L786NG is not set
+-# CONFIG_SENSORS_W83627HF is not set
+-# CONFIG_SENSORS_W83627EHF is not set
+-CONFIG_HWMON_DEBUG_CHIP=y
+-# CONFIG_THERMAL is not set
+-# CONFIG_WATCHDOG is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-CONFIG_DAB=y
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_AGP is not set
+-# CONFIG_DRM is not set
+-# CONFIG_VGASTATE is not set
+-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-CONFIG_HID_SUPPORT=y
+-CONFIG_HID=y
+-# CONFIG_HID_DEBUG is not set
+-# CONFIG_HIDRAW is not set
+-CONFIG_USB_SUPPORT=y
+-CONFIG_USB_ARCH_HAS_HCD=y
+-CONFIG_USB_ARCH_HAS_OHCI=y
+-CONFIG_USB_ARCH_HAS_EHCI=y
+-# CONFIG_USB is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_INFINIBAND is not set
+-# CONFIG_EDAC is not set
+-# CONFIG_RTC_CLASS is not set
+-# CONFIG_DMADEVICES is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=y
+-CONFIG_EXT3_FS_XATTR=y
+-# CONFIG_EXT3_FS_POSIX_ACL is not set
+-# CONFIG_EXT3_FS_SECURITY is not set
+-# CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=y
+-CONFIG_FS_MBCACHE=y
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-# CONFIG_MSDOS_FS is not set
+-# CONFIG_VFAT_FS is not set
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-CONFIG_JFFS2_FS=y
+-CONFIG_JFFS2_FS_DEBUG=0
+-CONFIG_JFFS2_FS_WRITEBUFFER=y
+-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+-# CONFIG_JFFS2_SUMMARY is not set
+-# CONFIG_JFFS2_FS_XATTR is not set
+-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+-CONFIG_JFFS2_ZLIB=y
+-# CONFIG_JFFS2_LZO is not set
+-CONFIG_JFFS2_RTIME=y
+-# CONFIG_JFFS2_RUBIN is not set
+-CONFIG_CRAMFS=y
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-# CONFIG_NFS_V3 is not set
+-# CONFIG_NFS_V4 is not set
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-# CONFIG_RPCSEC_GSS_KRB5 is not set
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-CONFIG_PARTITION_ADVANCED=y
+-# CONFIG_ACORN_PARTITION is not set
+-# CONFIG_OSF_PARTITION is not set
+-# CONFIG_AMIGA_PARTITION is not set
+-# CONFIG_ATARI_PARTITION is not set
+-# CONFIG_MAC_PARTITION is not set
+-# CONFIG_MSDOS_PARTITION is not set
+-# CONFIG_LDM_PARTITION is not set
+-# CONFIG_SGI_PARTITION is not set
+-# CONFIG_ULTRIX_PARTITION is not set
+-# CONFIG_SUN_PARTITION is not set
+-# CONFIG_KARMA_PARTITION is not set
+-# CONFIG_EFI_PARTITION is not set
+-# CONFIG_SYSV68_PARTITION is not set
+-# CONFIG_NLS is not set
+-# CONFIG_DLM is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_ZLIB_INFLATE=y
+-CONFIG_ZLIB_DEFLATE=y
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-# CONFIG_MAGIC_SYSRQ is not set
+-# CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
+-# CONFIG_HEADERS_CHECK is not set
+-# CONFIG_DEBUG_KERNEL is not set
+-# CONFIG_SLUB_DEBUG_ON is not set
+-# CONFIG_SLUB_STATS is not set
+-# CONFIG_DEBUG_BUGVERBOSE is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_KGDB_CONSOLE is not set
+-# CONFIG_PPC_EARLY_DEBUG is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-# CONFIG_CRYPTO_MANAGER is not set
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-# CONFIG_CRYPTO_MD5 is not set
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-# CONFIG_CRYPTO_ECB is not set
+-# CONFIG_CRYPTO_CBC is not set
+-# CONFIG_CRYPTO_PCBC is not set
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-# CONFIG_CRYPTO_DES is not set
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+-# CONFIG_PPC_CLOCK is not set
+-CONFIG_PPC_LIB_RHEAP=y
+--- a/arch/powerpc/configs/tqm8560_defconfig
++++ /dev/null
+@@ -1,1109 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc6
+-# Mon Mar 24 08:48:45 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-# CONFIG_6xx is not set
+-CONFIG_PPC_85xx=y
+-# CONFIG_PPC_8xx is not set
+-# CONFIG_40x is not set
+-# CONFIG_44x is not set
+-# CONFIG_E200 is not set
+-CONFIG_E500=y
+-CONFIG_BOOKE=y
+-CONFIG_FSL_BOOKE=y
+-CONFIG_FSL_EMB_PERFMON=y
+-# CONFIG_PHYS_64BIT is not set
+-CONFIG_SPE=y
+-# CONFIG_PPC_MM_SLICES is not set
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-CONFIG_DEFAULT_UIMAGE=y
+-# CONFIG_PPC_DCR_NATIVE is not set
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-# CONFIG_POSIX_MQUEUE is not set
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-CONFIG_FAIR_GROUP_SCHED=y
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-CONFIG_SYSFS_DEPRECATED_V2=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-# CONFIG_KALLSYMS is not set
+-# CONFIG_HOTPLUG is not set
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-# CONFIG_EPOLL is not set
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLUB_DEBUG=y
+-# CONFIG_SLAB is not set
+-CONFIG_SLUB=y
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_HAVE_KRETPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-# CONFIG_MODULES is not set
+-CONFIG_BLOCK=y
+-# CONFIG_LBD is not set
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-CONFIG_MPC85xx=y
+-# CONFIG_MPC8540_ADS is not set
+-# CONFIG_MPC8560_ADS is not set
+-# CONFIG_MPC85xx_CDS is not set
+-# CONFIG_MPC85xx_MDS is not set
+-# CONFIG_MPC85xx_DS is not set
+-# CONFIG_STX_GP3 is not set
+-# CONFIG_TQM8540 is not set
+-# CONFIG_TQM8541 is not set
+-# CONFIG_TQM8555 is not set
+-CONFIG_TQM8560=y
+-# CONFIG_SBC8548 is not set
+-# CONFIG_SBC8560 is not set
+-CONFIG_TQM85xx=y
+-# CONFIG_IPIC is not set
+-CONFIG_MPIC=y
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-CONFIG_CPM2=y
+-CONFIG_PPC_CPM_NEW_BINDING=y
+-# CONFIG_FSL_ULI1575 is not set
+-CONFIG_CPM=y
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-# CONFIG_TICK_ONESHOT is not set
+-# CONFIG_NO_HZ is not set
+-# CONFIG_HIGH_RES_TIMERS is not set
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_BINFMT_ELF=y
+-# CONFIG_BINFMT_MISC is not set
+-CONFIG_MATH_EMULATION=y
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-# CONFIG_RESOURCES_64BIT is not set
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-# CONFIG_PROC_DEVICETREE is not set
+-# CONFIG_CMDLINE_BOOL is not set
+-# CONFIG_PM is not set
+-CONFIG_SECCOMP=y
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_FSL_SOC=y
+-CONFIG_FSL_PCI=y
+-CONFIG_PCI=y
+-CONFIG_PCI_DOMAINS=y
+-CONFIG_PCI_SYSCALL=y
+-# CONFIG_PCIEPORTBUS is not set
+-CONFIG_ARCH_SUPPORTS_MSI=y
+-# CONFIG_PCI_MSI is not set
+-CONFIG_PCI_LEGACY=y
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_BOOT_LOAD=0x00800000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-CONFIG_XFRM=y
+-# CONFIG_XFRM_USER is not set
+-# CONFIG_XFRM_SUB_POLICY is not set
+-# CONFIG_XFRM_MIGRATE is not set
+-# CONFIG_XFRM_STATISTICS is not set
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-CONFIG_IP_MULTICAST=y
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_IP_MROUTE is not set
+-# CONFIG_ARPD is not set
+-CONFIG_SYN_COOKIES=y
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-CONFIG_INET_XFRM_MODE_TRANSPORT=y
+-CONFIG_INET_XFRM_MODE_TUNNEL=y
+-CONFIG_INET_XFRM_MODE_BEET=y
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-# CONFIG_SYS_HYPERVISOR is not set
+-# CONFIG_CONNECTOR is not set
+-CONFIG_MTD=y
+-# CONFIG_MTD_DEBUG is not set
+-CONFIG_MTD_CONCAT=y
+-CONFIG_MTD_PARTITIONS=y
+-# CONFIG_MTD_REDBOOT_PARTS is not set
+-CONFIG_MTD_CMDLINE_PARTS=y
+-# CONFIG_MTD_OF_PARTS is not set
+-
+-#
+-# User Modules And Translation Layers
+-#
+-CONFIG_MTD_CHAR=y
+-CONFIG_MTD_BLKDEVS=y
+-CONFIG_MTD_BLOCK=y
+-# CONFIG_FTL is not set
+-# CONFIG_NFTL is not set
+-# CONFIG_INFTL is not set
+-# CONFIG_RFD_FTL is not set
+-# CONFIG_SSFDC is not set
+-# CONFIG_MTD_OOPS is not set
+-
+-#
+-# RAM/ROM/Flash chip drivers
+-#
+-CONFIG_MTD_CFI=y
+-# CONFIG_MTD_JEDECPROBE is not set
+-CONFIG_MTD_GEN_PROBE=y
+-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+-CONFIG_MTD_MAP_BANK_WIDTH_1=y
+-CONFIG_MTD_MAP_BANK_WIDTH_2=y
+-CONFIG_MTD_MAP_BANK_WIDTH_4=y
+-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+-CONFIG_MTD_CFI_I1=y
+-CONFIG_MTD_CFI_I2=y
+-# CONFIG_MTD_CFI_I4 is not set
+-# CONFIG_MTD_CFI_I8 is not set
+-# CONFIG_MTD_CFI_INTELEXT is not set
+-CONFIG_MTD_CFI_AMDSTD=y
+-# CONFIG_MTD_CFI_STAA is not set
+-CONFIG_MTD_CFI_UTIL=y
+-# CONFIG_MTD_RAM is not set
+-# CONFIG_MTD_ROM is not set
+-# CONFIG_MTD_ABSENT is not set
+-
+-#
+-# Mapping drivers for chip access
+-#
+-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+-# CONFIG_MTD_PHYSMAP is not set
+-# CONFIG_MTD_PHYSMAP_OF is not set
+-# CONFIG_MTD_INTEL_VR_NOR is not set
+-# CONFIG_MTD_PLATRAM is not set
+-
+-#
+-# Self-contained MTD device drivers
+-#
+-# CONFIG_MTD_PMC551 is not set
+-# CONFIG_MTD_SLRAM is not set
+-# CONFIG_MTD_PHRAM is not set
+-# CONFIG_MTD_MTDRAM is not set
+-# CONFIG_MTD_BLOCK2MTD is not set
+-
+-#
+-# Disk-On-Chip Device Drivers
+-#
+-# CONFIG_MTD_DOC2000 is not set
+-# CONFIG_MTD_DOC2001 is not set
+-# CONFIG_MTD_DOC2001PLUS is not set
+-# CONFIG_MTD_NAND is not set
+-# CONFIG_MTD_ONENAND is not set
+-
+-#
+-# UBI - Unsorted block images
+-#
+-# CONFIG_MTD_UBI is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_CPQ_DA is not set
+-# CONFIG_BLK_CPQ_CISS_DA is not set
+-# CONFIG_BLK_DEV_DAC960 is not set
+-# CONFIG_BLK_DEV_UMEM is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-CONFIG_BLK_DEV_LOOP=y
+-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-# CONFIG_BLK_DEV_SX8 is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=32768
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_PHANTOM is not set
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_SGI_IOC4 is not set
+-# CONFIG_TIFM_CORE is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-CONFIG_IDE=y
+-CONFIG_IDE_MAX_HWIFS=4
+-CONFIG_BLK_DEV_IDE=y
+-
+-#
+-# Please see Documentation/ide/ide.txt for help/info on IDE drives
+-#
+-# CONFIG_BLK_DEV_IDE_SATA is not set
+-CONFIG_BLK_DEV_IDEDISK=y
+-# CONFIG_IDEDISK_MULTI_MODE is not set
+-# CONFIG_BLK_DEV_IDECD is not set
+-# CONFIG_BLK_DEV_IDETAPE is not set
+-# CONFIG_BLK_DEV_IDEFLOPPY is not set
+-# CONFIG_IDE_TASK_IOCTL is not set
+-CONFIG_IDE_PROC_FS=y
+-
+-#
+-# IDE chipset support/bugfixes
+-#
+-CONFIG_IDE_GENERIC=y
+-# CONFIG_BLK_DEV_PLATFORM is not set
+-CONFIG_BLK_DEV_IDEDMA_SFF=y
+-
+-#
+-# PCI IDE chipsets support
+-#
+-CONFIG_BLK_DEV_IDEPCI=y
+-CONFIG_IDEPCI_PCIBUS_ORDER=y
+-# CONFIG_BLK_DEV_OFFBOARD is not set
+-CONFIG_BLK_DEV_GENERIC=y
+-# CONFIG_BLK_DEV_OPTI621 is not set
+-CONFIG_BLK_DEV_IDEDMA_PCI=y
+-# CONFIG_BLK_DEV_AEC62XX is not set
+-# CONFIG_BLK_DEV_ALI15X3 is not set
+-# CONFIG_BLK_DEV_AMD74XX is not set
+-# CONFIG_BLK_DEV_CMD64X is not set
+-# CONFIG_BLK_DEV_TRIFLEX is not set
+-# CONFIG_BLK_DEV_CY82C693 is not set
+-# CONFIG_BLK_DEV_CS5520 is not set
+-# CONFIG_BLK_DEV_CS5530 is not set
+-# CONFIG_BLK_DEV_HPT34X is not set
+-# CONFIG_BLK_DEV_HPT366 is not set
+-# CONFIG_BLK_DEV_JMICRON is not set
+-# CONFIG_BLK_DEV_SC1200 is not set
+-# CONFIG_BLK_DEV_PIIX is not set
+-# CONFIG_BLK_DEV_IT8213 is not set
+-# CONFIG_BLK_DEV_IT821X is not set
+-# CONFIG_BLK_DEV_NS87415 is not set
+-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+-# CONFIG_BLK_DEV_SVWKS is not set
+-# CONFIG_BLK_DEV_SIIMAGE is not set
+-# CONFIG_BLK_DEV_SL82C105 is not set
+-# CONFIG_BLK_DEV_SLC90E66 is not set
+-# CONFIG_BLK_DEV_TRM290 is not set
+-CONFIG_BLK_DEV_VIA82CXXX=y
+-# CONFIG_BLK_DEV_TC86C001 is not set
+-CONFIG_BLK_DEV_IDEDMA=y
+-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+-# CONFIG_BLK_DEV_HD is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-# CONFIG_SCSI is not set
+-# CONFIG_SCSI_DMA is not set
+-# CONFIG_SCSI_NETLINK is not set
+-# CONFIG_ATA is not set
+-# CONFIG_MD is not set
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-# CONFIG_FIREWIRE is not set
+-# CONFIG_IEEE1394 is not set
+-# CONFIG_I2O is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_ARCNET is not set
+-CONFIG_PHYLIB=y
+-
+-#
+-# MII PHY device drivers
+-#
+-# CONFIG_MARVELL_PHY is not set
+-# CONFIG_DAVICOM_PHY is not set
+-# CONFIG_QSEMI_PHY is not set
+-# CONFIG_LXT_PHY is not set
+-# CONFIG_CICADA_PHY is not set
+-# CONFIG_VITESSE_PHY is not set
+-# CONFIG_SMSC_PHY is not set
+-# CONFIG_BROADCOM_PHY is not set
+-# CONFIG_ICPLUS_PHY is not set
+-# CONFIG_REALTEK_PHY is not set
+-# CONFIG_FIXED_PHY is not set
+-# CONFIG_MDIO_BITBANG is not set
+-CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
+-# CONFIG_HAPPYMEAL is not set
+-# CONFIG_SUNGEM is not set
+-# CONFIG_CASSINI is not set
+-# CONFIG_NET_VENDOR_3COM is not set
+-# CONFIG_NET_TULIP is not set
+-# CONFIG_HP100 is not set
+-# CONFIG_IBM_NEW_EMAC_ZMII is not set
+-# CONFIG_IBM_NEW_EMAC_RGMII is not set
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-CONFIG_NET_PCI=y
+-# CONFIG_PCNET32 is not set
+-# CONFIG_AMD8111_ETH is not set
+-# CONFIG_ADAPTEC_STARFIRE is not set
+-# CONFIG_B44 is not set
+-# CONFIG_FORCEDETH is not set
+-# CONFIG_EEPRO100 is not set
+-CONFIG_E100=y
+-# CONFIG_FEALNX is not set
+-# CONFIG_NATSEMI is not set
+-# CONFIG_NE2K_PCI is not set
+-# CONFIG_8139CP is not set
+-# CONFIG_8139TOO is not set
+-# CONFIG_R6040 is not set
+-# CONFIG_SIS900 is not set
+-# CONFIG_EPIC100 is not set
+-# CONFIG_SUNDANCE is not set
+-# CONFIG_TLAN is not set
+-# CONFIG_VIA_RHINE is not set
+-# CONFIG_SC92031 is not set
+-# CONFIG_FS_ENET is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_ACENIC is not set
+-# CONFIG_DL2K is not set
+-# CONFIG_E1000 is not set
+-# CONFIG_E1000E is not set
+-# CONFIG_E1000E_ENABLED is not set
+-# CONFIG_IP1000 is not set
+-# CONFIG_IGB is not set
+-# CONFIG_NS83820 is not set
+-# CONFIG_HAMACHI is not set
+-# CONFIG_YELLOWFIN is not set
+-# CONFIG_R8169 is not set
+-# CONFIG_SIS190 is not set
+-# CONFIG_SKGE is not set
+-# CONFIG_SKY2 is not set
+-# CONFIG_SK98LIN is not set
+-# CONFIG_VIA_VELOCITY is not set
+-# CONFIG_TIGON3 is not set
+-# CONFIG_BNX2 is not set
+-CONFIG_GIANFAR=y
+-CONFIG_GFAR_NAPI=y
+-# CONFIG_QLA3XXX is not set
+-# CONFIG_ATL1 is not set
+-CONFIG_NETDEV_10000=y
+-# CONFIG_CHELSIO_T1 is not set
+-# CONFIG_CHELSIO_T3 is not set
+-# CONFIG_IXGBE is not set
+-# CONFIG_IXGB is not set
+-# CONFIG_S2IO is not set
+-# CONFIG_MYRI10GE is not set
+-# CONFIG_NETXEN_NIC is not set
+-# CONFIG_NIU is not set
+-# CONFIG_MLX4_CORE is not set
+-# CONFIG_TEHUTI is not set
+-# CONFIG_BNX2X is not set
+-# CONFIG_TR is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-# CONFIG_WAN is not set
+-# CONFIG_FDDI is not set
+-# CONFIG_HIPPI is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-CONFIG_INPUT=y
+-# CONFIG_INPUT_FF_MEMLESS is not set
+-# CONFIG_INPUT_POLLDEV is not set
+-
+-#
+-# Userland interfaces
+-#
+-# CONFIG_INPUT_MOUSEDEV is not set
+-# CONFIG_INPUT_JOYDEV is not set
+-# CONFIG_INPUT_EVDEV is not set
+-# CONFIG_INPUT_EVBUG is not set
+-
+-#
+-# Input Device Drivers
+-#
+-# CONFIG_INPUT_KEYBOARD is not set
+-# CONFIG_INPUT_MOUSE is not set
+-# CONFIG_INPUT_JOYSTICK is not set
+-# CONFIG_INPUT_TABLET is not set
+-# CONFIG_INPUT_TOUCHSCREEN is not set
+-# CONFIG_INPUT_MISC is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-# CONFIG_NOZOMI is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-CONFIG_SERIAL_8250_PCI=y
+-CONFIG_SERIAL_8250_NR_UARTS=4
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-# CONFIG_SERIAL_8250_EXTENDED is not set
+-CONFIG_SERIAL_8250_SHARE_IRQ=y
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-CONFIG_SERIAL_CPM=y
+-CONFIG_SERIAL_CPM_CONSOLE=y
+-CONFIG_SERIAL_CPM_SCC1=y
+-# CONFIG_SERIAL_CPM_SCC2 is not set
+-# CONFIG_SERIAL_CPM_SCC3 is not set
+-# CONFIG_SERIAL_CPM_SCC4 is not set
+-# CONFIG_SERIAL_CPM_SMC1 is not set
+-# CONFIG_SERIAL_CPM_SMC2 is not set
+-# CONFIG_SERIAL_JSM is not set
+-# CONFIG_SERIAL_OF_PLATFORM is not set
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-CONFIG_HW_RANDOM=y
+-# CONFIG_NVRAM is not set
+-CONFIG_GEN_RTC=y
+-# CONFIG_GEN_RTC_X is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_APPLICOM is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_DEVPORT=y
+-CONFIG_I2C=y
+-CONFIG_I2C_BOARDINFO=y
+-CONFIG_I2C_CHARDEV=y
+-
+-#
+-# I2C Algorithms
+-#
+-# CONFIG_I2C_ALGOBIT is not set
+-# CONFIG_I2C_ALGOPCF is not set
+-# CONFIG_I2C_ALGOPCA is not set
+-
+-#
+-# I2C Hardware Bus support
+-#
+-# CONFIG_I2C_ALI1535 is not set
+-# CONFIG_I2C_ALI1563 is not set
+-# CONFIG_I2C_ALI15X3 is not set
+-# CONFIG_I2C_AMD756 is not set
+-# CONFIG_I2C_AMD8111 is not set
+-# CONFIG_I2C_I801 is not set
+-# CONFIG_I2C_I810 is not set
+-# CONFIG_I2C_PIIX4 is not set
+-CONFIG_I2C_MPC=y
+-# CONFIG_I2C_NFORCE2 is not set
+-# CONFIG_I2C_OCORES is not set
+-# CONFIG_I2C_PARPORT_LIGHT is not set
+-# CONFIG_I2C_PROSAVAGE is not set
+-# CONFIG_I2C_SAVAGE4 is not set
+-# CONFIG_I2C_SIMTEC is not set
+-# CONFIG_I2C_SIS5595 is not set
+-# CONFIG_I2C_SIS630 is not set
+-# CONFIG_I2C_SIS96X is not set
+-# CONFIG_I2C_TAOS_EVM is not set
+-# CONFIG_I2C_VIA is not set
+-# CONFIG_I2C_VIAPRO is not set
+-# CONFIG_I2C_VOODOO3 is not set
+-
+-#
+-# Miscellaneous I2C Chip support
+-#
+-# CONFIG_DS1682 is not set
+-# CONFIG_SENSORS_EEPROM is not set
+-# CONFIG_SENSORS_PCF8574 is not set
+-# CONFIG_PCF8575 is not set
+-# CONFIG_SENSORS_PCF8591 is not set
+-# CONFIG_TPS65010 is not set
+-# CONFIG_SENSORS_MAX6875 is not set
+-# CONFIG_SENSORS_TSL2550 is not set
+-# CONFIG_I2C_DEBUG_CORE is not set
+-# CONFIG_I2C_DEBUG_ALGO is not set
+-# CONFIG_I2C_DEBUG_BUS is not set
+-# CONFIG_I2C_DEBUG_CHIP is not set
+-
+-#
+-# SPI support
+-#
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-CONFIG_HWMON=y
+-# CONFIG_HWMON_VID is not set
+-# CONFIG_SENSORS_AD7418 is not set
+-# CONFIG_SENSORS_ADM1021 is not set
+-# CONFIG_SENSORS_ADM1025 is not set
+-# CONFIG_SENSORS_ADM1026 is not set
+-# CONFIG_SENSORS_ADM1029 is not set
+-# CONFIG_SENSORS_ADM1031 is not set
+-# CONFIG_SENSORS_ADM9240 is not set
+-# CONFIG_SENSORS_ADT7470 is not set
+-# CONFIG_SENSORS_ADT7473 is not set
+-# CONFIG_SENSORS_ATXP1 is not set
+-# CONFIG_SENSORS_DS1621 is not set
+-# CONFIG_SENSORS_I5K_AMB is not set
+-# CONFIG_SENSORS_F71805F is not set
+-# CONFIG_SENSORS_F71882FG is not set
+-# CONFIG_SENSORS_F75375S is not set
+-# CONFIG_SENSORS_GL518SM is not set
+-# CONFIG_SENSORS_GL520SM is not set
+-# CONFIG_SENSORS_IT87 is not set
+-# CONFIG_SENSORS_LM63 is not set
+-CONFIG_SENSORS_LM75=y
+-# CONFIG_SENSORS_LM77 is not set
+-# CONFIG_SENSORS_LM78 is not set
+-# CONFIG_SENSORS_LM80 is not set
+-# CONFIG_SENSORS_LM83 is not set
+-# CONFIG_SENSORS_LM85 is not set
+-# CONFIG_SENSORS_LM87 is not set
+-# CONFIG_SENSORS_LM90 is not set
+-# CONFIG_SENSORS_LM92 is not set
+-# CONFIG_SENSORS_LM93 is not set
+-# CONFIG_SENSORS_MAX1619 is not set
+-# CONFIG_SENSORS_MAX6650 is not set
+-# CONFIG_SENSORS_PC87360 is not set
+-# CONFIG_SENSORS_PC87427 is not set
+-# CONFIG_SENSORS_SIS5595 is not set
+-# CONFIG_SENSORS_DME1737 is not set
+-# CONFIG_SENSORS_SMSC47M1 is not set
+-# CONFIG_SENSORS_SMSC47M192 is not set
+-# CONFIG_SENSORS_SMSC47B397 is not set
+-# CONFIG_SENSORS_ADS7828 is not set
+-# CONFIG_SENSORS_THMC50 is not set
+-# CONFIG_SENSORS_VIA686A is not set
+-# CONFIG_SENSORS_VT1211 is not set
+-# CONFIG_SENSORS_VT8231 is not set
+-# CONFIG_SENSORS_W83781D is not set
+-# CONFIG_SENSORS_W83791D is not set
+-# CONFIG_SENSORS_W83792D is not set
+-# CONFIG_SENSORS_W83793 is not set
+-# CONFIG_SENSORS_W83L785TS is not set
+-# CONFIG_SENSORS_W83L786NG is not set
+-# CONFIG_SENSORS_W83627HF is not set
+-# CONFIG_SENSORS_W83627EHF is not set
+-CONFIG_HWMON_DEBUG_CHIP=y
+-# CONFIG_THERMAL is not set
+-# CONFIG_WATCHDOG is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-CONFIG_DAB=y
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_AGP is not set
+-# CONFIG_DRM is not set
+-# CONFIG_VGASTATE is not set
+-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-CONFIG_HID_SUPPORT=y
+-CONFIG_HID=y
+-# CONFIG_HID_DEBUG is not set
+-# CONFIG_HIDRAW is not set
+-CONFIG_USB_SUPPORT=y
+-CONFIG_USB_ARCH_HAS_HCD=y
+-CONFIG_USB_ARCH_HAS_OHCI=y
+-CONFIG_USB_ARCH_HAS_EHCI=y
+-# CONFIG_USB is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_INFINIBAND is not set
+-# CONFIG_EDAC is not set
+-# CONFIG_RTC_CLASS is not set
+-# CONFIG_DMADEVICES is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-CONFIG_EXT3_FS=y
+-CONFIG_EXT3_FS_XATTR=y
+-# CONFIG_EXT3_FS_POSIX_ACL is not set
+-# CONFIG_EXT3_FS_SECURITY is not set
+-# CONFIG_EXT4DEV_FS is not set
+-CONFIG_JBD=y
+-CONFIG_FS_MBCACHE=y
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-# CONFIG_MSDOS_FS is not set
+-# CONFIG_VFAT_FS is not set
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-CONFIG_JFFS2_FS=y
+-CONFIG_JFFS2_FS_DEBUG=0
+-CONFIG_JFFS2_FS_WRITEBUFFER=y
+-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+-# CONFIG_JFFS2_SUMMARY is not set
+-# CONFIG_JFFS2_FS_XATTR is not set
+-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+-CONFIG_JFFS2_ZLIB=y
+-# CONFIG_JFFS2_LZO is not set
+-CONFIG_JFFS2_RTIME=y
+-# CONFIG_JFFS2_RUBIN is not set
+-CONFIG_CRAMFS=y
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-# CONFIG_NFS_V3 is not set
+-# CONFIG_NFS_V4 is not set
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-# CONFIG_RPCSEC_GSS_KRB5 is not set
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-CONFIG_PARTITION_ADVANCED=y
+-# CONFIG_ACORN_PARTITION is not set
+-# CONFIG_OSF_PARTITION is not set
+-# CONFIG_AMIGA_PARTITION is not set
+-# CONFIG_ATARI_PARTITION is not set
+-# CONFIG_MAC_PARTITION is not set
+-# CONFIG_MSDOS_PARTITION is not set
+-# CONFIG_LDM_PARTITION is not set
+-# CONFIG_SGI_PARTITION is not set
+-# CONFIG_ULTRIX_PARTITION is not set
+-# CONFIG_SUN_PARTITION is not set
+-# CONFIG_KARMA_PARTITION is not set
+-# CONFIG_EFI_PARTITION is not set
+-# CONFIG_SYSV68_PARTITION is not set
+-# CONFIG_NLS is not set
+-# CONFIG_DLM is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_ZLIB_INFLATE=y
+-CONFIG_ZLIB_DEFLATE=y
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-# CONFIG_MAGIC_SYSRQ is not set
+-# CONFIG_UNUSED_SYMBOLS is not set
+-# CONFIG_DEBUG_FS is not set
+-# CONFIG_HEADERS_CHECK is not set
+-# CONFIG_DEBUG_KERNEL is not set
+-# CONFIG_SLUB_DEBUG_ON is not set
+-# CONFIG_SLUB_STATS is not set
+-# CONFIG_DEBUG_BUGVERBOSE is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_KGDB_CONSOLE is not set
+-# CONFIG_PPC_EARLY_DEBUG is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-# CONFIG_CRYPTO_MANAGER is not set
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-# CONFIG_CRYPTO_MD5 is not set
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-# CONFIG_CRYPTO_ECB is not set
+-# CONFIG_CRYPTO_CBC is not set
+-# CONFIG_CRYPTO_PCBC is not set
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-# CONFIG_CRYPTO_DES is not set
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+-# CONFIG_PPC_CLOCK is not set
+-CONFIG_PPC_LIB_RHEAP=y
+--- a/arch/powerpc/configs/walnut_defconfig
++++ /dev/null
+@@ -1,887 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc2
+-# Fri Feb 15 21:54:12 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-# CONFIG_6xx is not set
+-# CONFIG_PPC_85xx is not set
+-# CONFIG_PPC_8xx is not set
+-CONFIG_40x=y
+-# CONFIG_44x is not set
+-# CONFIG_E200 is not set
+-CONFIG_4xx=y
+-# CONFIG_PPC_MM_SLICES is not set
+-CONFIG_NOT_COHERENT_CACHE=y
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-# CONFIG_DEFAULT_UIMAGE is not set
+-CONFIG_PPC_DCR_NATIVE=y
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_PPC_DCR=y
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION=""
+-CONFIG_LOCALVERSION_AUTO=y
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-CONFIG_POSIX_MQUEUE=y
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-CONFIG_FAIR_GROUP_SCHED=y
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-CONFIG_KALLSYMS=y
+-CONFIG_KALLSYMS_ALL=y
+-CONFIG_KALLSYMS_EXTRA_PASS=y
+-CONFIG_HOTPLUG=y
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-CONFIG_EPOLL=y
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLUB_DEBUG=y
+-# CONFIG_SLAB is not set
+-CONFIG_SLUB=y
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-# CONFIG_KPROBES is not set
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-CONFIG_MODULES=y
+-CONFIG_MODULE_UNLOAD=y
+-# CONFIG_MODULE_FORCE_UNLOAD is not set
+-# CONFIG_MODVERSIONS is not set
+-# CONFIG_MODULE_SRCVERSION_ALL is not set
+-CONFIG_KMOD=y
+-CONFIG_BLOCK=y
+-CONFIG_LBD=y
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-# CONFIG_PREEMPT_RCU is not set
+-# CONFIG_PPC4xx_PCI_EXPRESS is not set
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-# CONFIG_EP405 is not set
+-# CONFIG_KILAUEA is not set
+-# CONFIG_MAKALU is not set
+-CONFIG_WALNUT=y
+-# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
+-CONFIG_405GP=y
+-CONFIG_IBM405_ERR77=y
+-CONFIG_IBM405_ERR51=y
+-# CONFIG_IPIC is not set
+-# CONFIG_MPIC is not set
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-# CONFIG_FSL_ULI1575 is not set
+-CONFIG_OF_RTC=y
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-# CONFIG_TICK_ONESHOT is not set
+-# CONFIG_NO_HZ is not set
+-# CONFIG_HIGH_RES_TIMERS is not set
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-CONFIG_HZ_250=y
+-# CONFIG_HZ_300 is not set
+-# CONFIG_HZ_1000 is not set
+-CONFIG_HZ=250
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_RCU_TRACE=y
+-CONFIG_BINFMT_ELF=y
+-# CONFIG_BINFMT_MISC is not set
+-# CONFIG_MATH_EMULATION is not set
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-CONFIG_RESOURCES_64BIT=y
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-CONFIG_PROC_DEVICETREE=y
+-# CONFIG_CMDLINE_BOOL is not set
+-# CONFIG_PM is not set
+-CONFIG_SECCOMP=y
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-CONFIG_PPC_INDIRECT_PCI=y
+-CONFIG_PCI=y
+-CONFIG_PCI_DOMAINS=y
+-CONFIG_PCI_SYSCALL=y
+-# CONFIG_PCIEPORTBUS is not set
+-CONFIG_ARCH_SUPPORTS_MSI=y
+-# CONFIG_PCI_MSI is not set
+-# CONFIG_PCI_LEGACY is not set
+-# CONFIG_PCI_DEBUG is not set
+-# CONFIG_PCCARD is not set
+-# CONFIG_HOTPLUG_PCI is not set
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_CONSISTENT_START=0xff100000
+-CONFIG_CONSISTENT_SIZE=0x00200000
+-CONFIG_BOOT_LOAD=0x00400000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-# CONFIG_IP_MULTICAST is not set
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-CONFIG_IP_PNP_BOOTP=y
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_ARPD is not set
+-# CONFIG_SYN_COOKIES is not set
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+-# CONFIG_INET_XFRM_MODE_BEET is not set
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-# CONFIG_NETFILTER is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-# CONFIG_VLAN_8021Q is not set
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-CONFIG_STANDALONE=y
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-CONFIG_FW_LOADER=y
+-# CONFIG_DEBUG_DRIVER is not set
+-# CONFIG_DEBUG_DEVRES is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-CONFIG_CONNECTOR=y
+-CONFIG_PROC_EVENTS=y
+-CONFIG_MTD=y
+-# CONFIG_MTD_DEBUG is not set
+-# CONFIG_MTD_CONCAT is not set
+-CONFIG_MTD_PARTITIONS=y
+-# CONFIG_MTD_REDBOOT_PARTS is not set
+-CONFIG_MTD_CMDLINE_PARTS=y
+-CONFIG_MTD_OF_PARTS=y
+-
+-#
+-# User Modules And Translation Layers
+-#
+-CONFIG_MTD_CHAR=y
+-CONFIG_MTD_BLKDEVS=m
+-CONFIG_MTD_BLOCK=m
+-# CONFIG_MTD_BLOCK_RO is not set
+-# CONFIG_FTL is not set
+-# CONFIG_NFTL is not set
+-# CONFIG_INFTL is not set
+-# CONFIG_RFD_FTL is not set
+-# CONFIG_SSFDC is not set
+-# CONFIG_MTD_OOPS is not set
+-
+-#
+-# RAM/ROM/Flash chip drivers
+-#
+-CONFIG_MTD_CFI=y
+-CONFIG_MTD_JEDECPROBE=y
+-CONFIG_MTD_GEN_PROBE=y
+-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+-CONFIG_MTD_MAP_BANK_WIDTH_1=y
+-CONFIG_MTD_MAP_BANK_WIDTH_2=y
+-CONFIG_MTD_MAP_BANK_WIDTH_4=y
+-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+-CONFIG_MTD_CFI_I1=y
+-CONFIG_MTD_CFI_I2=y
+-# CONFIG_MTD_CFI_I4 is not set
+-# CONFIG_MTD_CFI_I8 is not set
+-# CONFIG_MTD_CFI_INTELEXT is not set
+-CONFIG_MTD_CFI_AMDSTD=y
+-# CONFIG_MTD_CFI_STAA is not set
+-CONFIG_MTD_CFI_UTIL=y
+-# CONFIG_MTD_RAM is not set
+-# CONFIG_MTD_ROM is not set
+-# CONFIG_MTD_ABSENT is not set
+-
+-#
+-# Mapping drivers for chip access
+-#
+-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+-# CONFIG_MTD_PHYSMAP is not set
+-CONFIG_MTD_PHYSMAP_OF=y
+-# CONFIG_MTD_INTEL_VR_NOR is not set
+-# CONFIG_MTD_PLATRAM is not set
+-
+-#
+-# Self-contained MTD device drivers
+-#
+-# CONFIG_MTD_PMC551 is not set
+-# CONFIG_MTD_SLRAM is not set
+-# CONFIG_MTD_PHRAM is not set
+-# CONFIG_MTD_MTDRAM is not set
+-# CONFIG_MTD_BLOCK2MTD is not set
+-
+-#
+-# Disk-On-Chip Device Drivers
+-#
+-# CONFIG_MTD_DOC2000 is not set
+-# CONFIG_MTD_DOC2001 is not set
+-# CONFIG_MTD_DOC2001PLUS is not set
+-# CONFIG_MTD_NAND is not set
+-# CONFIG_MTD_ONENAND is not set
+-
+-#
+-# UBI - Unsorted block images
+-#
+-# CONFIG_MTD_UBI is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_CPQ_DA is not set
+-# CONFIG_BLK_CPQ_CISS_DA is not set
+-# CONFIG_BLK_DEV_DAC960 is not set
+-# CONFIG_BLK_DEV_UMEM is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-# CONFIG_BLK_DEV_LOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-# CONFIG_BLK_DEV_SX8 is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=35000
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-# CONFIG_XILINX_SYSACE is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_PHANTOM is not set
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_SGI_IOC4 is not set
+-# CONFIG_TIFM_CORE is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-# CONFIG_IDE is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-# CONFIG_SCSI is not set
+-# CONFIG_SCSI_DMA is not set
+-# CONFIG_SCSI_NETLINK is not set
+-# CONFIG_ATA is not set
+-# CONFIG_MD is not set
+-# CONFIG_FUSION is not set
+-
+-#
+-# IEEE 1394 (FireWire) support
+-#
+-# CONFIG_FIREWIRE is not set
+-# CONFIG_IEEE1394 is not set
+-# CONFIG_I2O is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_ARCNET is not set
+-# CONFIG_PHYLIB is not set
+-CONFIG_NET_ETHERNET=y
+-# CONFIG_MII is not set
+-# CONFIG_HAPPYMEAL is not set
+-# CONFIG_SUNGEM is not set
+-# CONFIG_CASSINI is not set
+-# CONFIG_NET_VENDOR_3COM is not set
+-# CONFIG_NET_TULIP is not set
+-# CONFIG_HP100 is not set
+-CONFIG_IBM_NEW_EMAC=y
+-CONFIG_IBM_NEW_EMAC_RXB=128
+-CONFIG_IBM_NEW_EMAC_TXB=64
+-CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+-CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+-CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+-# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+-CONFIG_IBM_NEW_EMAC_ZMII=y
+-# CONFIG_IBM_NEW_EMAC_RGMII is not set
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-# CONFIG_NET_PCI is not set
+-# CONFIG_B44 is not set
+-CONFIG_NETDEV_1000=y
+-# CONFIG_ACENIC is not set
+-# CONFIG_DL2K is not set
+-# CONFIG_E1000 is not set
+-# CONFIG_E1000E is not set
+-# CONFIG_E1000E_ENABLED is not set
+-# CONFIG_IP1000 is not set
+-# CONFIG_IGB is not set
+-# CONFIG_NS83820 is not set
+-# CONFIG_HAMACHI is not set
+-# CONFIG_YELLOWFIN is not set
+-# CONFIG_R8169 is not set
+-# CONFIG_SIS190 is not set
+-# CONFIG_SKGE is not set
+-# CONFIG_SKY2 is not set
+-# CONFIG_SK98LIN is not set
+-# CONFIG_VIA_VELOCITY is not set
+-# CONFIG_TIGON3 is not set
+-# CONFIG_BNX2 is not set
+-# CONFIG_QLA3XXX is not set
+-# CONFIG_ATL1 is not set
+-CONFIG_NETDEV_10000=y
+-# CONFIG_CHELSIO_T1 is not set
+-# CONFIG_CHELSIO_T3 is not set
+-# CONFIG_IXGBE is not set
+-# CONFIG_IXGB is not set
+-# CONFIG_S2IO is not set
+-# CONFIG_MYRI10GE is not set
+-# CONFIG_NETXEN_NIC is not set
+-# CONFIG_NIU is not set
+-# CONFIG_MLX4_CORE is not set
+-# CONFIG_TEHUTI is not set
+-# CONFIG_BNX2X is not set
+-# CONFIG_TR is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-# CONFIG_WAN is not set
+-# CONFIG_FDDI is not set
+-# CONFIG_HIPPI is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-# CONFIG_INPUT is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-# CONFIG_NOZOMI is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-CONFIG_SERIAL_8250_PCI=y
+-CONFIG_SERIAL_8250_NR_UARTS=4
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-CONFIG_SERIAL_8250_EXTENDED=y
+-# CONFIG_SERIAL_8250_MANY_PORTS is not set
+-CONFIG_SERIAL_8250_SHARE_IRQ=y
+-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+-# CONFIG_SERIAL_8250_RSA is not set
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_JSM is not set
+-CONFIG_SERIAL_OF_PLATFORM=y
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-# CONFIG_HW_RANDOM is not set
+-# CONFIG_NVRAM is not set
+-# CONFIG_GEN_RTC is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_APPLICOM is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_DEVPORT=y
+-# CONFIG_I2C is not set
+-
+-#
+-# SPI support
+-#
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-# CONFIG_HWMON is not set
+-CONFIG_THERMAL=y
+-# CONFIG_WATCHDOG is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-# CONFIG_DAB is not set
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_AGP is not set
+-# CONFIG_DRM is not set
+-# CONFIG_VGASTATE is not set
+-CONFIG_VIDEO_OUTPUT_CONTROL=m
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-CONFIG_USB_SUPPORT=y
+-CONFIG_USB_ARCH_HAS_HCD=y
+-CONFIG_USB_ARCH_HAS_OHCI=y
+-CONFIG_USB_ARCH_HAS_EHCI=y
+-# CONFIG_USB is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-# CONFIG_USB_GADGET is not set
+-# CONFIG_MMC is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_INFINIBAND is not set
+-# CONFIG_EDAC is not set
+-# CONFIG_RTC_CLASS is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-# CONFIG_EXT3_FS is not set
+-# CONFIG_EXT4DEV_FS is not set
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-# CONFIG_MSDOS_FS is not set
+-# CONFIG_VFAT_FS is not set
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-CONFIG_TMPFS=y
+-# CONFIG_TMPFS_POSIX_ACL is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-# CONFIG_JFFS2_FS is not set
+-CONFIG_CRAMFS=y
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-CONFIG_NFS_V3=y
+-# CONFIG_NFS_V3_ACL is not set
+-# CONFIG_NFS_V4 is not set
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_LOCKD_V4=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-# CONFIG_RPCSEC_GSS_KRB5 is not set
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-# CONFIG_PARTITION_ADVANCED is not set
+-CONFIG_MSDOS_PARTITION=y
+-# CONFIG_NLS is not set
+-# CONFIG_DLM is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-# CONFIG_CRC_CCITT is not set
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_ZLIB_INFLATE=y
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-CONFIG_MAGIC_SYSRQ=y
+-# CONFIG_UNUSED_SYMBOLS is not set
+-CONFIG_DEBUG_FS=y
+-# CONFIG_HEADERS_CHECK is not set
+-CONFIG_DEBUG_KERNEL=y
+-# CONFIG_DEBUG_SHIRQ is not set
+-CONFIG_DETECT_SOFTLOCKUP=y
+-CONFIG_SCHED_DEBUG=y
+-# CONFIG_SCHEDSTATS is not set
+-# CONFIG_TIMER_STATS is not set
+-# CONFIG_SLUB_DEBUG_ON is not set
+-# CONFIG_SLUB_STATS is not set
+-# CONFIG_DEBUG_RT_MUTEXES is not set
+-# CONFIG_RT_MUTEX_TESTER is not set
+-# CONFIG_DEBUG_SPINLOCK is not set
+-# CONFIG_DEBUG_MUTEXES is not set
+-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+-# CONFIG_DEBUG_KOBJECT is not set
+-CONFIG_DEBUG_BUGVERBOSE=y
+-# CONFIG_DEBUG_INFO is not set
+-# CONFIG_DEBUG_VM is not set
+-# CONFIG_DEBUG_LIST is not set
+-# CONFIG_DEBUG_SG is not set
+-# CONFIG_BOOT_PRINTK_DELAY is not set
+-# CONFIG_RCU_TORTURE_TEST is not set
+-# CONFIG_BACKTRACE_SELF_TEST is not set
+-# CONFIG_FAULT_INJECTION is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_DEBUG_STACKOVERFLOW is not set
+-# CONFIG_DEBUG_STACK_USAGE is not set
+-# CONFIG_DEBUG_PAGEALLOC is not set
+-# CONFIG_DEBUGGER is not set
+-# CONFIG_VIRQ_DEBUG is not set
+-# CONFIG_BDI_SWITCH is not set
+-# CONFIG_PPC_EARLY_DEBUG is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-CONFIG_CRYPTO_ALGAPI=y
+-CONFIG_CRYPTO_BLKCIPHER=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-CONFIG_CRYPTO_MANAGER=y
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-CONFIG_CRYPTO_MD5=y
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-CONFIG_CRYPTO_ECB=y
+-CONFIG_CRYPTO_CBC=y
+-CONFIG_CRYPTO_PCBC=y
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-CONFIG_CRYPTO_DES=y
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_TEST is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+-# CONFIG_PPC_CLOCK is not set
+--- a/arch/powerpc/configs/warp_defconfig
++++ /dev/null
+@@ -1,1110 +0,0 @@
+-#
+-# Automatically generated make config: don't edit
+-# Linux kernel version: 2.6.25-rc2
+-# Fri Feb 15 21:54:43 2008
+-#
+-# CONFIG_PPC64 is not set
+-
+-#
+-# Processor support
+-#
+-# CONFIG_6xx is not set
+-# CONFIG_PPC_85xx is not set
+-# CONFIG_PPC_8xx is not set
+-# CONFIG_40x is not set
+-CONFIG_44x=y
+-# CONFIG_E200 is not set
+-CONFIG_PPC_FPU=y
+-CONFIG_4xx=y
+-CONFIG_BOOKE=y
+-CONFIG_PTE_64BIT=y
+-CONFIG_PHYS_64BIT=y
+-# CONFIG_PPC_MM_SLICES is not set
+-CONFIG_NOT_COHERENT_CACHE=y
+-CONFIG_PPC32=y
+-CONFIG_WORD_SIZE=32
+-CONFIG_PPC_MERGE=y
+-CONFIG_MMU=y
+-CONFIG_GENERIC_CMOS_UPDATE=y
+-CONFIG_GENERIC_TIME=y
+-CONFIG_GENERIC_TIME_VSYSCALL=y
+-CONFIG_GENERIC_CLOCKEVENTS=y
+-CONFIG_GENERIC_HARDIRQS=y
+-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+-CONFIG_IRQ_PER_CPU=y
+-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+-CONFIG_ARCH_HAS_ILOG2_U32=y
+-CONFIG_GENERIC_HWEIGHT=y
+-CONFIG_GENERIC_CALIBRATE_DELAY=y
+-CONFIG_GENERIC_FIND_NEXT_BIT=y
+-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+-CONFIG_PPC=y
+-CONFIG_EARLY_PRINTK=y
+-CONFIG_GENERIC_NVRAM=y
+-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+-CONFIG_PPC_OF=y
+-CONFIG_OF=y
+-CONFIG_PPC_UDBG_16550=y
+-# CONFIG_GENERIC_TBSYNC is not set
+-CONFIG_AUDIT_ARCH=y
+-CONFIG_GENERIC_BUG=y
+-# CONFIG_DEFAULT_UIMAGE is not set
+-CONFIG_PPC_DCR_NATIVE=y
+-# CONFIG_PPC_DCR_MMIO is not set
+-CONFIG_PPC_DCR=y
+-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+-
+-#
+-# General setup
+-#
+-CONFIG_EXPERIMENTAL=y
+-CONFIG_BROKEN_ON_SMP=y
+-CONFIG_INIT_ENV_ARG_LIMIT=32
+-CONFIG_LOCALVERSION="-pika"
+-# CONFIG_LOCALVERSION_AUTO is not set
+-CONFIG_SWAP=y
+-CONFIG_SYSVIPC=y
+-CONFIG_SYSVIPC_SYSCTL=y
+-# CONFIG_POSIX_MQUEUE is not set
+-# CONFIG_BSD_PROCESS_ACCT is not set
+-# CONFIG_TASKSTATS is not set
+-# CONFIG_AUDIT is not set
+-# CONFIG_IKCONFIG is not set
+-CONFIG_LOG_BUF_SHIFT=14
+-# CONFIG_CGROUPS is not set
+-CONFIG_GROUP_SCHED=y
+-CONFIG_FAIR_GROUP_SCHED=y
+-# CONFIG_RT_GROUP_SCHED is not set
+-CONFIG_USER_SCHED=y
+-# CONFIG_CGROUP_SCHED is not set
+-CONFIG_SYSFS_DEPRECATED=y
+-# CONFIG_RELAY is not set
+-# CONFIG_NAMESPACES is not set
+-CONFIG_BLK_DEV_INITRD=y
+-CONFIG_INITRAMFS_SOURCE=""
+-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+-CONFIG_SYSCTL=y
+-CONFIG_EMBEDDED=y
+-CONFIG_SYSCTL_SYSCALL=y
+-CONFIG_KALLSYMS=y
+-# CONFIG_KALLSYMS_ALL is not set
+-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+-# CONFIG_HOTPLUG is not set
+-CONFIG_PRINTK=y
+-CONFIG_BUG=y
+-CONFIG_ELF_CORE=y
+-CONFIG_COMPAT_BRK=y
+-CONFIG_BASE_FULL=y
+-CONFIG_FUTEX=y
+-CONFIG_ANON_INODES=y
+-CONFIG_EPOLL=y
+-CONFIG_SIGNALFD=y
+-CONFIG_TIMERFD=y
+-CONFIG_EVENTFD=y
+-CONFIG_SHMEM=y
+-CONFIG_VM_EVENT_COUNTERS=y
+-CONFIG_SLAB=y
+-# CONFIG_SLUB is not set
+-# CONFIG_SLOB is not set
+-# CONFIG_PROFILING is not set
+-# CONFIG_MARKERS is not set
+-CONFIG_HAVE_OPROFILE=y
+-# CONFIG_KPROBES is not set
+-CONFIG_HAVE_KPROBES=y
+-CONFIG_PROC_PAGE_MONITOR=y
+-CONFIG_SLABINFO=y
+-CONFIG_RT_MUTEXES=y
+-# CONFIG_TINY_SHMEM is not set
+-CONFIG_BASE_SMALL=0
+-CONFIG_MODULES=y
+-CONFIG_MODULE_UNLOAD=y
+-# CONFIG_MODULE_FORCE_UNLOAD is not set
+-# CONFIG_MODVERSIONS is not set
+-# CONFIG_MODULE_SRCVERSION_ALL is not set
+-CONFIG_KMOD=y
+-CONFIG_BLOCK=y
+-# CONFIG_LBD is not set
+-# CONFIG_BLK_DEV_IO_TRACE is not set
+-# CONFIG_LSF is not set
+-# CONFIG_BLK_DEV_BSG is not set
+-
+-#
+-# IO Schedulers
+-#
+-CONFIG_IOSCHED_NOOP=y
+-CONFIG_IOSCHED_AS=y
+-CONFIG_IOSCHED_DEADLINE=y
+-CONFIG_IOSCHED_CFQ=y
+-CONFIG_DEFAULT_AS=y
+-# CONFIG_DEFAULT_DEADLINE is not set
+-# CONFIG_DEFAULT_CFQ is not set
+-# CONFIG_DEFAULT_NOOP is not set
+-CONFIG_DEFAULT_IOSCHED="anticipatory"
+-CONFIG_CLASSIC_RCU=y
+-# CONFIG_PREEMPT_RCU is not set
+-
+-#
+-# Platform support
+-#
+-# CONFIG_PPC_MPC512x is not set
+-# CONFIG_PPC_MPC5121 is not set
+-# CONFIG_PPC_CELL is not set
+-# CONFIG_PPC_CELL_NATIVE is not set
+-# CONFIG_PQ2ADS is not set
+-# CONFIG_BAMBOO is not set
+-# CONFIG_EBONY is not set
+-# CONFIG_SEQUOIA is not set
+-# CONFIG_TAISHAN is not set
+-# CONFIG_KATMAI is not set
+-# CONFIG_RAINIER is not set
+-CONFIG_WARP=y
+-CONFIG_440EP=y
+-CONFIG_IBM440EP_ERR42=y
+-# CONFIG_IPIC is not set
+-# CONFIG_MPIC is not set
+-# CONFIG_MPIC_WEIRD is not set
+-# CONFIG_PPC_I8259 is not set
+-# CONFIG_PPC_RTAS is not set
+-# CONFIG_MMIO_NVRAM is not set
+-# CONFIG_PPC_MPC106 is not set
+-# CONFIG_PPC_970_NAP is not set
+-# CONFIG_PPC_INDIRECT_IO is not set
+-# CONFIG_GENERIC_IOMAP is not set
+-# CONFIG_CPU_FREQ is not set
+-# CONFIG_FSL_ULI1575 is not set
+-
+-#
+-# Kernel options
+-#
+-# CONFIG_HIGHMEM is not set
+-# CONFIG_TICK_ONESHOT is not set
+-# CONFIG_NO_HZ is not set
+-# CONFIG_HIGH_RES_TIMERS is not set
+-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+-# CONFIG_HZ_100 is not set
+-# CONFIG_HZ_250 is not set
+-# CONFIG_HZ_300 is not set
+-CONFIG_HZ_1000=y
+-CONFIG_HZ=1000
+-# CONFIG_SCHED_HRTICK is not set
+-CONFIG_PREEMPT_NONE=y
+-# CONFIG_PREEMPT_VOLUNTARY is not set
+-# CONFIG_PREEMPT is not set
+-CONFIG_RCU_TRACE=y
+-CONFIG_BINFMT_ELF=y
+-# CONFIG_BINFMT_MISC is not set
+-# CONFIG_MATH_EMULATION is not set
+-# CONFIG_IOMMU_HELPER is not set
+-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+-CONFIG_ARCH_HAS_WALK_MEMORY=y
+-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+-CONFIG_ARCH_FLATMEM_ENABLE=y
+-CONFIG_ARCH_POPULATES_NODE_MAP=y
+-CONFIG_SELECT_MEMORY_MODEL=y
+-CONFIG_FLATMEM_MANUAL=y
+-# CONFIG_DISCONTIGMEM_MANUAL is not set
+-# CONFIG_SPARSEMEM_MANUAL is not set
+-CONFIG_FLATMEM=y
+-CONFIG_FLAT_NODE_MEM_MAP=y
+-# CONFIG_SPARSEMEM_STATIC is not set
+-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+-CONFIG_SPLIT_PTLOCK_CPUS=4
+-CONFIG_RESOURCES_64BIT=y
+-CONFIG_ZONE_DMA_FLAG=1
+-CONFIG_BOUNCE=y
+-CONFIG_VIRT_TO_BUS=y
+-CONFIG_PROC_DEVICETREE=y
+-CONFIG_CMDLINE_BOOL=y
+-CONFIG_CMDLINE="ip=on"
+-CONFIG_SECCOMP=y
+-CONFIG_ISA_DMA_API=y
+-
+-#
+-# Bus options
+-#
+-CONFIG_ZONE_DMA=y
+-# CONFIG_PCI is not set
+-# CONFIG_PCI_DOMAINS is not set
+-# CONFIG_PCI_SYSCALL is not set
+-# CONFIG_ARCH_SUPPORTS_MSI is not set
+-
+-#
+-# Advanced setup
+-#
+-# CONFIG_ADVANCED_OPTIONS is not set
+-
+-#
+-# Default settings for advanced configuration options are used
+-#
+-CONFIG_HIGHMEM_START=0xfe000000
+-CONFIG_LOWMEM_SIZE=0x30000000
+-CONFIG_KERNEL_START=0xc0000000
+-CONFIG_TASK_SIZE=0xc0000000
+-CONFIG_CONSISTENT_START=0xff100000
+-CONFIG_CONSISTENT_SIZE=0x00200000
+-CONFIG_BOOT_LOAD=0x01000000
+-
+-#
+-# Networking
+-#
+-CONFIG_NET=y
+-
+-#
+-# Networking options
+-#
+-CONFIG_PACKET=y
+-# CONFIG_PACKET_MMAP is not set
+-CONFIG_UNIX=y
+-CONFIG_XFRM=y
+-# CONFIG_XFRM_USER is not set
+-# CONFIG_XFRM_SUB_POLICY is not set
+-# CONFIG_XFRM_MIGRATE is not set
+-# CONFIG_XFRM_STATISTICS is not set
+-# CONFIG_NET_KEY is not set
+-CONFIG_INET=y
+-# CONFIG_IP_MULTICAST is not set
+-# CONFIG_IP_ADVANCED_ROUTER is not set
+-CONFIG_IP_FIB_HASH=y
+-CONFIG_IP_PNP=y
+-CONFIG_IP_PNP_DHCP=y
+-# CONFIG_IP_PNP_BOOTP is not set
+-# CONFIG_IP_PNP_RARP is not set
+-# CONFIG_NET_IPIP is not set
+-# CONFIG_NET_IPGRE is not set
+-# CONFIG_ARPD is not set
+-# CONFIG_SYN_COOKIES is not set
+-# CONFIG_INET_AH is not set
+-# CONFIG_INET_ESP is not set
+-# CONFIG_INET_IPCOMP is not set
+-# CONFIG_INET_XFRM_TUNNEL is not set
+-# CONFIG_INET_TUNNEL is not set
+-CONFIG_INET_XFRM_MODE_TRANSPORT=y
+-CONFIG_INET_XFRM_MODE_TUNNEL=y
+-CONFIG_INET_XFRM_MODE_BEET=y
+-# CONFIG_INET_LRO is not set
+-CONFIG_INET_DIAG=y
+-CONFIG_INET_TCP_DIAG=y
+-# CONFIG_TCP_CONG_ADVANCED is not set
+-CONFIG_TCP_CONG_CUBIC=y
+-CONFIG_DEFAULT_TCP_CONG="cubic"
+-# CONFIG_TCP_MD5SIG is not set
+-# CONFIG_IP_VS is not set
+-# CONFIG_IPV6 is not set
+-# CONFIG_INET6_XFRM_TUNNEL is not set
+-# CONFIG_INET6_TUNNEL is not set
+-# CONFIG_NETWORK_SECMARK is not set
+-CONFIG_NETFILTER=y
+-# CONFIG_NETFILTER_DEBUG is not set
+-CONFIG_NETFILTER_ADVANCED=y
+-
+-#
+-# Core Netfilter Configuration
+-#
+-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+-# CONFIG_NETFILTER_NETLINK_LOG is not set
+-# CONFIG_NF_CONNTRACK is not set
+-# CONFIG_NETFILTER_XTABLES is not set
+-
+-#
+-# IP: Netfilter Configuration
+-#
+-# CONFIG_IP_NF_QUEUE is not set
+-# CONFIG_IP_NF_IPTABLES is not set
+-# CONFIG_IP_NF_ARPTABLES is not set
+-# CONFIG_IP_DCCP is not set
+-# CONFIG_IP_SCTP is not set
+-# CONFIG_TIPC is not set
+-# CONFIG_ATM is not set
+-# CONFIG_BRIDGE is not set
+-CONFIG_VLAN_8021Q=y
+-# CONFIG_DECNET is not set
+-# CONFIG_LLC2 is not set
+-# CONFIG_IPX is not set
+-# CONFIG_ATALK is not set
+-# CONFIG_X25 is not set
+-# CONFIG_LAPB is not set
+-# CONFIG_ECONET is not set
+-# CONFIG_WAN_ROUTER is not set
+-# CONFIG_NET_SCHED is not set
+-
+-#
+-# Network testing
+-#
+-# CONFIG_NET_PKTGEN is not set
+-# CONFIG_HAMRADIO is not set
+-# CONFIG_CAN is not set
+-# CONFIG_IRDA is not set
+-# CONFIG_BT is not set
+-# CONFIG_AF_RXRPC is not set
+-
+-#
+-# Wireless
+-#
+-# CONFIG_CFG80211 is not set
+-# CONFIG_WIRELESS_EXT is not set
+-# CONFIG_MAC80211 is not set
+-# CONFIG_IEEE80211 is not set
+-# CONFIG_RFKILL is not set
+-# CONFIG_NET_9P is not set
+-
+-#
+-# Device Drivers
+-#
+-
+-#
+-# Generic Driver Options
+-#
+-# CONFIG_STANDALONE is not set
+-CONFIG_PREVENT_FIRMWARE_BUILD=y
+-# CONFIG_DEBUG_DRIVER is not set
+-# CONFIG_DEBUG_DEVRES is not set
+-# CONFIG_SYS_HYPERVISOR is not set
+-# CONFIG_CONNECTOR is not set
+-CONFIG_MTD=y
+-# CONFIG_MTD_DEBUG is not set
+-# CONFIG_MTD_CONCAT is not set
+-CONFIG_MTD_PARTITIONS=y
+-# CONFIG_MTD_REDBOOT_PARTS is not set
+-# CONFIG_MTD_CMDLINE_PARTS is not set
+-CONFIG_MTD_OF_PARTS=y
+-
+-#
+-# User Modules And Translation Layers
+-#
+-CONFIG_MTD_CHAR=y
+-CONFIG_MTD_BLKDEVS=y
+-CONFIG_MTD_BLOCK=y
+-# CONFIG_FTL is not set
+-# CONFIG_NFTL is not set
+-# CONFIG_INFTL is not set
+-# CONFIG_RFD_FTL is not set
+-# CONFIG_SSFDC is not set
+-CONFIG_MTD_OOPS=m
+-
+-#
+-# RAM/ROM/Flash chip drivers
+-#
+-CONFIG_MTD_CFI=y
+-# CONFIG_MTD_JEDECPROBE is not set
+-CONFIG_MTD_GEN_PROBE=y
+-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+-CONFIG_MTD_MAP_BANK_WIDTH_1=y
+-CONFIG_MTD_MAP_BANK_WIDTH_2=y
+-CONFIG_MTD_MAP_BANK_WIDTH_4=y
+-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+-CONFIG_MTD_CFI_I1=y
+-CONFIG_MTD_CFI_I2=y
+-# CONFIG_MTD_CFI_I4 is not set
+-# CONFIG_MTD_CFI_I8 is not set
+-# CONFIG_MTD_CFI_INTELEXT is not set
+-CONFIG_MTD_CFI_AMDSTD=y
+-# CONFIG_MTD_CFI_STAA is not set
+-CONFIG_MTD_CFI_UTIL=y
+-# CONFIG_MTD_RAM is not set
+-# CONFIG_MTD_ROM is not set
+-# CONFIG_MTD_ABSENT is not set
+-
+-#
+-# Mapping drivers for chip access
+-#
+-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+-# CONFIG_MTD_PHYSMAP is not set
+-CONFIG_MTD_PHYSMAP_OF=y
+-# CONFIG_MTD_PLATRAM is not set
+-
+-#
+-# Self-contained MTD device drivers
+-#
+-# CONFIG_MTD_SLRAM is not set
+-# CONFIG_MTD_PHRAM is not set
+-# CONFIG_MTD_MTDRAM is not set
+-# CONFIG_MTD_BLOCK2MTD is not set
+-
+-#
+-# Disk-On-Chip Device Drivers
+-#
+-# CONFIG_MTD_DOC2000 is not set
+-# CONFIG_MTD_DOC2001 is not set
+-# CONFIG_MTD_DOC2001PLUS is not set
+-CONFIG_MTD_NAND=y
+-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+-CONFIG_MTD_NAND_ECC_SMC=y
+-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+-CONFIG_MTD_NAND_IDS=y
+-# CONFIG_MTD_NAND_DISKONCHIP is not set
+-# CONFIG_MTD_NAND_NANDSIM is not set
+-# CONFIG_MTD_NAND_PLATFORM is not set
+-# CONFIG_MTD_ALAUDA is not set
+-# CONFIG_MTD_NAND_FSL_ELBC is not set
+-# CONFIG_MTD_ONENAND is not set
+-
+-#
+-# UBI - Unsorted block images
+-#
+-# CONFIG_MTD_UBI is not set
+-CONFIG_OF_DEVICE=y
+-# CONFIG_PARPORT is not set
+-CONFIG_BLK_DEV=y
+-# CONFIG_BLK_DEV_FD is not set
+-# CONFIG_BLK_DEV_COW_COMMON is not set
+-# CONFIG_BLK_DEV_LOOP is not set
+-# CONFIG_BLK_DEV_NBD is not set
+-# CONFIG_BLK_DEV_UB is not set
+-CONFIG_BLK_DEV_RAM=y
+-CONFIG_BLK_DEV_RAM_COUNT=16
+-CONFIG_BLK_DEV_RAM_SIZE=4096
+-# CONFIG_BLK_DEV_XIP is not set
+-# CONFIG_CDROM_PKTCDVD is not set
+-# CONFIG_ATA_OVER_ETH is not set
+-# CONFIG_XILINX_SYSACE is not set
+-CONFIG_MISC_DEVICES=y
+-# CONFIG_EEPROM_93CX6 is not set
+-# CONFIG_ENCLOSURE_SERVICES is not set
+-CONFIG_HAVE_IDE=y
+-# CONFIG_IDE is not set
+-
+-#
+-# SCSI device support
+-#
+-# CONFIG_RAID_ATTRS is not set
+-CONFIG_SCSI=y
+-CONFIG_SCSI_DMA=y
+-# CONFIG_SCSI_TGT is not set
+-# CONFIG_SCSI_NETLINK is not set
+-CONFIG_SCSI_PROC_FS=y
+-
+-#
+-# SCSI support type (disk, tape, CD-ROM)
+-#
+-CONFIG_BLK_DEV_SD=y
+-# CONFIG_CHR_DEV_ST is not set
+-# CONFIG_CHR_DEV_OSST is not set
+-# CONFIG_BLK_DEV_SR is not set
+-# CONFIG_CHR_DEV_SG is not set
+-# CONFIG_CHR_DEV_SCH is not set
+-
+-#
+-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+-#
+-# CONFIG_SCSI_MULTI_LUN is not set
+-# CONFIG_SCSI_CONSTANTS is not set
+-# CONFIG_SCSI_LOGGING is not set
+-# CONFIG_SCSI_SCAN_ASYNC is not set
+-CONFIG_SCSI_WAIT_SCAN=m
+-
+-#
+-# SCSI Transports
+-#
+-CONFIG_SCSI_SPI_ATTRS=y
+-# CONFIG_SCSI_FC_ATTRS is not set
+-# CONFIG_SCSI_ISCSI_ATTRS is not set
+-# CONFIG_SCSI_SAS_LIBSAS is not set
+-# CONFIG_SCSI_SRP_ATTRS is not set
+-# CONFIG_SCSI_LOWLEVEL is not set
+-# CONFIG_ATA is not set
+-# CONFIG_MD is not set
+-# CONFIG_MACINTOSH_DRIVERS is not set
+-CONFIG_NETDEVICES=y
+-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+-# CONFIG_DUMMY is not set
+-# CONFIG_BONDING is not set
+-# CONFIG_MACVLAN is not set
+-# CONFIG_EQUALIZER is not set
+-# CONFIG_TUN is not set
+-# CONFIG_VETH is not set
+-# CONFIG_PHYLIB is not set
+-CONFIG_NET_ETHERNET=y
+-CONFIG_MII=y
+-CONFIG_IBM_NEW_EMAC=y
+-CONFIG_IBM_NEW_EMAC_RXB=128
+-CONFIG_IBM_NEW_EMAC_TXB=64
+-CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+-CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+-CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+-# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+-CONFIG_IBM_NEW_EMAC_ZMII=y
+-# CONFIG_IBM_NEW_EMAC_RGMII is not set
+-# CONFIG_IBM_NEW_EMAC_TAH is not set
+-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+-# CONFIG_B44 is not set
+-# CONFIG_NETDEV_1000 is not set
+-# CONFIG_NETDEV_10000 is not set
+-
+-#
+-# Wireless LAN
+-#
+-# CONFIG_WLAN_PRE80211 is not set
+-# CONFIG_WLAN_80211 is not set
+-
+-#
+-# USB Network Adapters
+-#
+-# CONFIG_USB_CATC is not set
+-# CONFIG_USB_KAWETH is not set
+-# CONFIG_USB_PEGASUS is not set
+-# CONFIG_USB_RTL8150 is not set
+-# CONFIG_USB_USBNET is not set
+-# CONFIG_WAN is not set
+-# CONFIG_PPP is not set
+-# CONFIG_SLIP is not set
+-# CONFIG_NETCONSOLE is not set
+-# CONFIG_NETPOLL is not set
+-# CONFIG_NET_POLL_CONTROLLER is not set
+-# CONFIG_ISDN is not set
+-# CONFIG_PHONE is not set
+-
+-#
+-# Input device support
+-#
+-# CONFIG_INPUT is not set
+-
+-#
+-# Hardware I/O ports
+-#
+-# CONFIG_SERIO is not set
+-# CONFIG_GAMEPORT is not set
+-
+-#
+-# Character devices
+-#
+-# CONFIG_VT is not set
+-# CONFIG_SERIAL_NONSTANDARD is not set
+-
+-#
+-# Serial drivers
+-#
+-CONFIG_SERIAL_8250=y
+-CONFIG_SERIAL_8250_CONSOLE=y
+-CONFIG_SERIAL_8250_NR_UARTS=4
+-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+-CONFIG_SERIAL_8250_EXTENDED=y
+-# CONFIG_SERIAL_8250_MANY_PORTS is not set
+-CONFIG_SERIAL_8250_SHARE_IRQ=y
+-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+-# CONFIG_SERIAL_8250_RSA is not set
+-
+-#
+-# Non-8250 serial port support
+-#
+-# CONFIG_SERIAL_UARTLITE is not set
+-CONFIG_SERIAL_CORE=y
+-CONFIG_SERIAL_CORE_CONSOLE=y
+-# CONFIG_SERIAL_OF_PLATFORM is not set
+-CONFIG_UNIX98_PTYS=y
+-CONFIG_LEGACY_PTYS=y
+-CONFIG_LEGACY_PTY_COUNT=256
+-# CONFIG_IPMI_HANDLER is not set
+-CONFIG_HW_RANDOM=y
+-# CONFIG_NVRAM is not set
+-# CONFIG_GEN_RTC is not set
+-# CONFIG_R3964 is not set
+-# CONFIG_RAW_DRIVER is not set
+-# CONFIG_TCG_TPM is not set
+-CONFIG_I2C=y
+-CONFIG_I2C_BOARDINFO=y
+-# CONFIG_I2C_CHARDEV is not set
+-
+-#
+-# I2C Algorithms
+-#
+-# CONFIG_I2C_ALGOBIT is not set
+-# CONFIG_I2C_ALGOPCF is not set
+-# CONFIG_I2C_ALGOPCA is not set
+-
+-#
+-# I2C Hardware Bus support
+-#
+-# CONFIG_I2C_MPC is not set
+-# CONFIG_I2C_OCORES is not set
+-# CONFIG_I2C_PARPORT_LIGHT is not set
+-# CONFIG_I2C_SIMTEC is not set
+-# CONFIG_I2C_TAOS_EVM is not set
+-# CONFIG_I2C_STUB is not set
+-# CONFIG_I2C_TINY_USB is not set
+-
+-#
+-# Miscellaneous I2C Chip support
+-#
+-# CONFIG_DS1682 is not set
+-CONFIG_SENSORS_EEPROM=y
+-# CONFIG_SENSORS_PCF8574 is not set
+-# CONFIG_PCF8575 is not set
+-# CONFIG_SENSORS_PCF8591 is not set
+-# CONFIG_TPS65010 is not set
+-# CONFIG_SENSORS_MAX6875 is not set
+-# CONFIG_SENSORS_TSL2550 is not set
+-# CONFIG_I2C_DEBUG_CORE is not set
+-# CONFIG_I2C_DEBUG_ALGO is not set
+-# CONFIG_I2C_DEBUG_BUS is not set
+-# CONFIG_I2C_DEBUG_CHIP is not set
+-
+-#
+-# SPI support
+-#
+-# CONFIG_SPI is not set
+-# CONFIG_SPI_MASTER is not set
+-# CONFIG_W1 is not set
+-# CONFIG_POWER_SUPPLY is not set
+-CONFIG_HWMON=y
+-# CONFIG_HWMON_VID is not set
+-# CONFIG_SENSORS_AD7418 is not set
+-# CONFIG_SENSORS_ADM1021 is not set
+-# CONFIG_SENSORS_ADM1025 is not set
+-# CONFIG_SENSORS_ADM1026 is not set
+-# CONFIG_SENSORS_ADM1029 is not set
+-# CONFIG_SENSORS_ADM1031 is not set
+-# CONFIG_SENSORS_ADM9240 is not set
+-# CONFIG_SENSORS_ADT7470 is not set
+-# CONFIG_SENSORS_ATXP1 is not set
+-# CONFIG_SENSORS_DS1621 is not set
+-# CONFIG_SENSORS_F71805F is not set
+-# CONFIG_SENSORS_F71882FG is not set
+-# CONFIG_SENSORS_F75375S is not set
+-# CONFIG_SENSORS_GL518SM is not set
+-# CONFIG_SENSORS_GL520SM is not set
+-# CONFIG_SENSORS_IT87 is not set
+-# CONFIG_SENSORS_LM63 is not set
+-# CONFIG_SENSORS_LM75 is not set
+-# CONFIG_SENSORS_LM77 is not set
+-# CONFIG_SENSORS_LM78 is not set
+-# CONFIG_SENSORS_LM80 is not set
+-# CONFIG_SENSORS_LM83 is not set
+-# CONFIG_SENSORS_LM85 is not set
+-# CONFIG_SENSORS_LM87 is not set
+-# CONFIG_SENSORS_LM90 is not set
+-# CONFIG_SENSORS_LM92 is not set
+-# CONFIG_SENSORS_LM93 is not set
+-# CONFIG_SENSORS_MAX1619 is not set
+-# CONFIG_SENSORS_MAX6650 is not set
+-# CONFIG_SENSORS_PC87360 is not set
+-# CONFIG_SENSORS_PC87427 is not set
+-# CONFIG_SENSORS_DME1737 is not set
+-# CONFIG_SENSORS_SMSC47M1 is not set
+-# CONFIG_SENSORS_SMSC47M192 is not set
+-# CONFIG_SENSORS_SMSC47B397 is not set
+-# CONFIG_SENSORS_ADS7828 is not set
+-# CONFIG_SENSORS_THMC50 is not set
+-# CONFIG_SENSORS_VT1211 is not set
+-# CONFIG_SENSORS_W83781D is not set
+-# CONFIG_SENSORS_W83791D is not set
+-# CONFIG_SENSORS_W83792D is not set
+-# CONFIG_SENSORS_W83793 is not set
+-# CONFIG_SENSORS_W83L785TS is not set
+-# CONFIG_SENSORS_W83L786NG is not set
+-# CONFIG_SENSORS_W83627HF is not set
+-# CONFIG_SENSORS_W83627EHF is not set
+-# CONFIG_HWMON_DEBUG_CHIP is not set
+-CONFIG_THERMAL=y
+-# CONFIG_WATCHDOG is not set
+-
+-#
+-# Sonics Silicon Backplane
+-#
+-CONFIG_SSB_POSSIBLE=y
+-# CONFIG_SSB is not set
+-
+-#
+-# Multifunction device drivers
+-#
+-# CONFIG_MFD_SM501 is not set
+-
+-#
+-# Multimedia devices
+-#
+-# CONFIG_VIDEO_DEV is not set
+-# CONFIG_DVB_CORE is not set
+-# CONFIG_DAB is not set
+-
+-#
+-# Graphics support
+-#
+-# CONFIG_VGASTATE is not set
+-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+-# CONFIG_FB is not set
+-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+-
+-#
+-# Display device support
+-#
+-# CONFIG_DISPLAY_SUPPORT is not set
+-
+-#
+-# Sound
+-#
+-# CONFIG_SOUND is not set
+-CONFIG_USB_SUPPORT=y
+-CONFIG_USB_ARCH_HAS_HCD=y
+-CONFIG_USB_ARCH_HAS_OHCI=y
+-# CONFIG_USB_ARCH_HAS_EHCI is not set
+-CONFIG_USB=y
+-# CONFIG_USB_DEBUG is not set
+-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+-
+-#
+-# Miscellaneous USB options
+-#
+-# CONFIG_USB_DEVICEFS is not set
+-CONFIG_USB_DEVICE_CLASS=y
+-# CONFIG_USB_DYNAMIC_MINORS is not set
+-# CONFIG_USB_OTG is not set
+-
+-#
+-# USB Host Controller Drivers
+-#
+-# CONFIG_USB_ISP116X_HCD is not set
+-CONFIG_USB_OHCI_HCD=y
+-CONFIG_USB_OHCI_HCD_PPC_OF=y
+-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+-# CONFIG_USB_SL811_HCD is not set
+-# CONFIG_USB_R8A66597_HCD is not set
+-
+-#
+-# USB Device Class drivers
+-#
+-# CONFIG_USB_ACM is not set
+-# CONFIG_USB_PRINTER is not set
+-
+-#
+-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+-#
+-
+-#
+-# may also be needed; see USB_STORAGE Help for more information
+-#
+-CONFIG_USB_STORAGE=y
+-# CONFIG_USB_STORAGE_DEBUG is not set
+-# CONFIG_USB_STORAGE_DATAFAB is not set
+-# CONFIG_USB_STORAGE_FREECOM is not set
+-# CONFIG_USB_STORAGE_ISD200 is not set
+-# CONFIG_USB_STORAGE_DPCM is not set
+-# CONFIG_USB_STORAGE_USBAT is not set
+-# CONFIG_USB_STORAGE_SDDR09 is not set
+-# CONFIG_USB_STORAGE_SDDR55 is not set
+-# CONFIG_USB_STORAGE_JUMPSHOT is not set
+-# CONFIG_USB_STORAGE_ALAUDA is not set
+-# CONFIG_USB_STORAGE_KARMA is not set
+-# CONFIG_USB_LIBUSUAL is not set
+-
+-#
+-# USB Imaging devices
+-#
+-# CONFIG_USB_MDC800 is not set
+-# CONFIG_USB_MICROTEK is not set
+-CONFIG_USB_MON=y
+-
+-#
+-# USB port drivers
+-#
+-# CONFIG_USB_SERIAL is not set
+-
+-#
+-# USB Miscellaneous drivers
+-#
+-# CONFIG_USB_EMI62 is not set
+-# CONFIG_USB_EMI26 is not set
+-# CONFIG_USB_ADUTUX is not set
+-# CONFIG_USB_AUERSWALD is not set
+-# CONFIG_USB_RIO500 is not set
+-# CONFIG_USB_LEGOTOWER is not set
+-# CONFIG_USB_LCD is not set
+-# CONFIG_USB_BERRY_CHARGE is not set
+-# CONFIG_USB_LED is not set
+-# CONFIG_USB_CYPRESS_CY7C63 is not set
+-# CONFIG_USB_CYTHERM is not set
+-# CONFIG_USB_PHIDGET is not set
+-# CONFIG_USB_IDMOUSE is not set
+-# CONFIG_USB_FTDI_ELAN is not set
+-# CONFIG_USB_APPLEDISPLAY is not set
+-# CONFIG_USB_LD is not set
+-# CONFIG_USB_TRANCEVIBRATOR is not set
+-# CONFIG_USB_IOWARRIOR is not set
+-# CONFIG_USB_GADGET is not set
+-CONFIG_MMC=m
+-# CONFIG_MMC_DEBUG is not set
+-# CONFIG_MMC_UNSAFE_RESUME is not set
+-
+-#
+-# MMC/SD Card Drivers
+-#
+-CONFIG_MMC_BLOCK=m
+-CONFIG_MMC_BLOCK_BOUNCE=y
+-# CONFIG_SDIO_UART is not set
+-
+-#
+-# MMC/SD Host Controller Drivers
+-#
+-# CONFIG_MMC_WBSD is not set
+-# CONFIG_MEMSTICK is not set
+-# CONFIG_NEW_LEDS is not set
+-# CONFIG_EDAC is not set
+-# CONFIG_RTC_CLASS is not set
+-
+-#
+-# Userspace I/O
+-#
+-# CONFIG_UIO is not set
+-
+-#
+-# File systems
+-#
+-CONFIG_EXT2_FS=y
+-# CONFIG_EXT2_FS_XATTR is not set
+-# CONFIG_EXT2_FS_XIP is not set
+-# CONFIG_EXT3_FS is not set
+-# CONFIG_EXT4DEV_FS is not set
+-# CONFIG_REISERFS_FS is not set
+-# CONFIG_JFS_FS is not set
+-# CONFIG_FS_POSIX_ACL is not set
+-# CONFIG_XFS_FS is not set
+-# CONFIG_GFS2_FS is not set
+-# CONFIG_OCFS2_FS is not set
+-CONFIG_DNOTIFY=y
+-CONFIG_INOTIFY=y
+-CONFIG_INOTIFY_USER=y
+-# CONFIG_QUOTA is not set
+-# CONFIG_AUTOFS_FS is not set
+-# CONFIG_AUTOFS4_FS is not set
+-# CONFIG_FUSE_FS is not set
+-
+-#
+-# CD-ROM/DVD Filesystems
+-#
+-# CONFIG_ISO9660_FS is not set
+-# CONFIG_UDF_FS is not set
+-
+-#
+-# DOS/FAT/NT Filesystems
+-#
+-CONFIG_FAT_FS=y
+-CONFIG_MSDOS_FS=y
+-CONFIG_VFAT_FS=y
+-CONFIG_FAT_DEFAULT_CODEPAGE=437
+-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+-# CONFIG_NTFS_FS is not set
+-
+-#
+-# Pseudo filesystems
+-#
+-CONFIG_PROC_FS=y
+-CONFIG_PROC_KCORE=y
+-CONFIG_PROC_SYSCTL=y
+-CONFIG_SYSFS=y
+-# CONFIG_TMPFS is not set
+-# CONFIG_HUGETLB_PAGE is not set
+-# CONFIG_CONFIGFS_FS is not set
+-
+-#
+-# Miscellaneous filesystems
+-#
+-# CONFIG_ADFS_FS is not set
+-# CONFIG_AFFS_FS is not set
+-# CONFIG_HFS_FS is not set
+-# CONFIG_HFSPLUS_FS is not set
+-# CONFIG_BEFS_FS is not set
+-# CONFIG_BFS_FS is not set
+-# CONFIG_EFS_FS is not set
+-CONFIG_JFFS2_FS=y
+-CONFIG_JFFS2_FS_DEBUG=0
+-CONFIG_JFFS2_FS_WRITEBUFFER=y
+-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+-# CONFIG_JFFS2_SUMMARY is not set
+-# CONFIG_JFFS2_FS_XATTR is not set
+-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+-CONFIG_JFFS2_ZLIB=y
+-# CONFIG_JFFS2_LZO is not set
+-CONFIG_JFFS2_RTIME=y
+-# CONFIG_JFFS2_RUBIN is not set
+-CONFIG_CRAMFS=y
+-# CONFIG_VXFS_FS is not set
+-# CONFIG_MINIX_FS is not set
+-# CONFIG_HPFS_FS is not set
+-# CONFIG_QNX4FS_FS is not set
+-# CONFIG_ROMFS_FS is not set
+-# CONFIG_SYSV_FS is not set
+-# CONFIG_UFS_FS is not set
+-CONFIG_NETWORK_FILESYSTEMS=y
+-CONFIG_NFS_FS=y
+-CONFIG_NFS_V3=y
+-# CONFIG_NFS_V3_ACL is not set
+-# CONFIG_NFS_V4 is not set
+-# CONFIG_NFS_DIRECTIO is not set
+-# CONFIG_NFSD is not set
+-CONFIG_ROOT_NFS=y
+-CONFIG_LOCKD=y
+-CONFIG_LOCKD_V4=y
+-CONFIG_NFS_COMMON=y
+-CONFIG_SUNRPC=y
+-# CONFIG_SUNRPC_BIND34 is not set
+-# CONFIG_RPCSEC_GSS_KRB5 is not set
+-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+-# CONFIG_SMB_FS is not set
+-# CONFIG_CIFS is not set
+-# CONFIG_NCP_FS is not set
+-# CONFIG_CODA_FS is not set
+-# CONFIG_AFS_FS is not set
+-
+-#
+-# Partition Types
+-#
+-# CONFIG_PARTITION_ADVANCED is not set
+-CONFIG_MSDOS_PARTITION=y
+-CONFIG_NLS=y
+-CONFIG_NLS_DEFAULT="iso8859-1"
+-CONFIG_NLS_CODEPAGE_437=y
+-# CONFIG_NLS_CODEPAGE_737 is not set
+-# CONFIG_NLS_CODEPAGE_775 is not set
+-CONFIG_NLS_CODEPAGE_850=y
+-# CONFIG_NLS_CODEPAGE_852 is not set
+-# CONFIG_NLS_CODEPAGE_855 is not set
+-# CONFIG_NLS_CODEPAGE_857 is not set
+-# CONFIG_NLS_CODEPAGE_860 is not set
+-# CONFIG_NLS_CODEPAGE_861 is not set
+-# CONFIG_NLS_CODEPAGE_862 is not set
+-# CONFIG_NLS_CODEPAGE_863 is not set
+-# CONFIG_NLS_CODEPAGE_864 is not set
+-# CONFIG_NLS_CODEPAGE_865 is not set
+-# CONFIG_NLS_CODEPAGE_866 is not set
+-# CONFIG_NLS_CODEPAGE_869 is not set
+-# CONFIG_NLS_CODEPAGE_936 is not set
+-# CONFIG_NLS_CODEPAGE_950 is not set
+-# CONFIG_NLS_CODEPAGE_932 is not set
+-# CONFIG_NLS_CODEPAGE_949 is not set
+-# CONFIG_NLS_CODEPAGE_874 is not set
+-# CONFIG_NLS_ISO8859_8 is not set
+-# CONFIG_NLS_CODEPAGE_1250 is not set
+-# CONFIG_NLS_CODEPAGE_1251 is not set
+-CONFIG_NLS_ASCII=y
+-CONFIG_NLS_ISO8859_1=y
+-# CONFIG_NLS_ISO8859_2 is not set
+-# CONFIG_NLS_ISO8859_3 is not set
+-# CONFIG_NLS_ISO8859_4 is not set
+-# CONFIG_NLS_ISO8859_5 is not set
+-# CONFIG_NLS_ISO8859_6 is not set
+-# CONFIG_NLS_ISO8859_7 is not set
+-# CONFIG_NLS_ISO8859_9 is not set
+-# CONFIG_NLS_ISO8859_13 is not set
+-# CONFIG_NLS_ISO8859_14 is not set
+-CONFIG_NLS_ISO8859_15=y
+-# CONFIG_NLS_KOI8_R is not set
+-# CONFIG_NLS_KOI8_U is not set
+-CONFIG_NLS_UTF8=y
+-# CONFIG_DLM is not set
+-
+-#
+-# Library routines
+-#
+-CONFIG_BITREVERSE=y
+-CONFIG_CRC_CCITT=y
+-# CONFIG_CRC16 is not set
+-# CONFIG_CRC_ITU_T is not set
+-CONFIG_CRC32=y
+-# CONFIG_CRC7 is not set
+-# CONFIG_LIBCRC32C is not set
+-CONFIG_ZLIB_INFLATE=y
+-CONFIG_ZLIB_DEFLATE=y
+-CONFIG_PLIST=y
+-CONFIG_HAS_IOMEM=y
+-CONFIG_HAS_IOPORT=y
+-CONFIG_HAS_DMA=y
+-
+-#
+-# Kernel hacking
+-#
+-# CONFIG_PRINTK_TIME is not set
+-CONFIG_ENABLE_WARN_DEPRECATED=y
+-CONFIG_ENABLE_MUST_CHECK=y
+-CONFIG_MAGIC_SYSRQ=y
+-# CONFIG_UNUSED_SYMBOLS is not set
+-CONFIG_DEBUG_FS=y
+-# CONFIG_HEADERS_CHECK is not set
+-CONFIG_DEBUG_KERNEL=y
+-# CONFIG_DEBUG_SHIRQ is not set
+-CONFIG_DETECT_SOFTLOCKUP=y
+-# CONFIG_SCHED_DEBUG is not set
+-# CONFIG_SCHEDSTATS is not set
+-# CONFIG_TIMER_STATS is not set
+-# CONFIG_DEBUG_SLAB is not set
+-# CONFIG_DEBUG_RT_MUTEXES is not set
+-# CONFIG_RT_MUTEX_TESTER is not set
+-# CONFIG_DEBUG_SPINLOCK is not set
+-# CONFIG_DEBUG_MUTEXES is not set
+-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+-# CONFIG_DEBUG_KOBJECT is not set
+-# CONFIG_DEBUG_BUGVERBOSE is not set
+-CONFIG_DEBUG_INFO=y
+-# CONFIG_DEBUG_VM is not set
+-# CONFIG_DEBUG_LIST is not set
+-# CONFIG_DEBUG_SG is not set
+-# CONFIG_BOOT_PRINTK_DELAY is not set
+-# CONFIG_RCU_TORTURE_TEST is not set
+-# CONFIG_BACKTRACE_SELF_TEST is not set
+-# CONFIG_FAULT_INJECTION is not set
+-# CONFIG_SAMPLES is not set
+-# CONFIG_DEBUG_STACKOVERFLOW is not set
+-# CONFIG_DEBUG_STACK_USAGE is not set
+-# CONFIG_DEBUG_PAGEALLOC is not set
+-# CONFIG_DEBUGGER is not set
+-# CONFIG_VIRQ_DEBUG is not set
+-CONFIG_BDI_SWITCH=y
+-# CONFIG_PPC_EARLY_DEBUG is not set
+-
+-#
+-# Security options
+-#
+-# CONFIG_KEYS is not set
+-# CONFIG_SECURITY is not set
+-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+-CONFIG_CRYPTO=y
+-# CONFIG_CRYPTO_SEQIV is not set
+-# CONFIG_CRYPTO_MANAGER is not set
+-# CONFIG_CRYPTO_HMAC is not set
+-# CONFIG_CRYPTO_XCBC is not set
+-# CONFIG_CRYPTO_NULL is not set
+-# CONFIG_CRYPTO_MD4 is not set
+-# CONFIG_CRYPTO_MD5 is not set
+-# CONFIG_CRYPTO_SHA1 is not set
+-# CONFIG_CRYPTO_SHA256 is not set
+-# CONFIG_CRYPTO_SHA512 is not set
+-# CONFIG_CRYPTO_WP512 is not set
+-# CONFIG_CRYPTO_TGR192 is not set
+-# CONFIG_CRYPTO_GF128MUL is not set
+-# CONFIG_CRYPTO_ECB is not set
+-# CONFIG_CRYPTO_CBC is not set
+-# CONFIG_CRYPTO_PCBC is not set
+-# CONFIG_CRYPTO_LRW is not set
+-# CONFIG_CRYPTO_XTS is not set
+-# CONFIG_CRYPTO_CTR is not set
+-# CONFIG_CRYPTO_GCM is not set
+-# CONFIG_CRYPTO_CCM is not set
+-# CONFIG_CRYPTO_CRYPTD is not set
+-# CONFIG_CRYPTO_DES is not set
+-# CONFIG_CRYPTO_FCRYPT is not set
+-# CONFIG_CRYPTO_BLOWFISH is not set
+-# CONFIG_CRYPTO_TWOFISH is not set
+-# CONFIG_CRYPTO_SERPENT is not set
+-# CONFIG_CRYPTO_AES is not set
+-# CONFIG_CRYPTO_CAST5 is not set
+-# CONFIG_CRYPTO_CAST6 is not set
+-# CONFIG_CRYPTO_TEA is not set
+-# CONFIG_CRYPTO_ARC4 is not set
+-# CONFIG_CRYPTO_KHAZAD is not set
+-# CONFIG_CRYPTO_ANUBIS is not set
+-# CONFIG_CRYPTO_SEED is not set
+-# CONFIG_CRYPTO_SALSA20 is not set
+-# CONFIG_CRYPTO_DEFLATE is not set
+-# CONFIG_CRYPTO_MICHAEL_MIC is not set
+-# CONFIG_CRYPTO_CRC32C is not set
+-# CONFIG_CRYPTO_CAMELLIA is not set
+-# CONFIG_CRYPTO_TEST is not set
+-# CONFIG_CRYPTO_AUTHENC is not set
+-# CONFIG_CRYPTO_LZO is not set
+-CONFIG_CRYPTO_HW=y
+-# CONFIG_PPC_CLOCK is not set
+--- a/arch/powerpc/kernel/Makefile
++++ b/arch/powerpc/kernel/Makefile
+@@ -67,6 +67,7 @@ obj-$(CONFIG_BOOTX_TEXT)	+= btext.o
+ obj-$(CONFIG_SMP)		+= smp.o
+ obj-$(CONFIG_KPROBES)		+= kprobes.o
+ obj-$(CONFIG_PPC_UDBG_16550)	+= legacy_serial.o udbg_16550.o
++obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
+ 
+ pci64-$(CONFIG_PPC64)		+= pci_dn.o isa-bridge.o
+ obj-$(CONFIG_PCI)		+= pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \
+--- a/arch/powerpc/kernel/asm-offsets.c
++++ b/arch/powerpc/kernel/asm-offsets.c
+@@ -26,8 +26,6 @@
+ #ifdef CONFIG_PPC64
+ #include <linux/time.h>
+ #include <linux/hardirq.h>
+-#else
+-#include <linux/ptrace.h>
+ #endif
+ 
+ #include <asm/io.h>
+@@ -46,6 +44,9 @@
+ #include <asm/mmu.h>
+ #include <asm/hvcall.h>
+ #endif
++#ifdef CONFIG_PPC_ISERIES
++#include <asm/iseries/alpaca.h>
++#endif
+ 
+ #define DEFINE(sym, val) \
+ 	asm volatile("\n->" #sym " %0 " #val : : "i" (val))
+@@ -60,7 +61,6 @@ int main(void)
+ 	DEFINE(AUDITCONTEXT, offsetof(struct task_struct, audit_context));
+ #else
+ 	DEFINE(THREAD_INFO, offsetof(struct task_struct, stack));
+-	DEFINE(PTRACE, offsetof(struct task_struct, ptrace));
+ #endif /* CONFIG_PPC64 */
+ 
+ 	DEFINE(KSP, offsetof(struct thread_struct, ksp));
+@@ -80,7 +80,6 @@ int main(void)
+ 	DEFINE(PGDIR, offsetof(struct thread_struct, pgdir));
+ #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+ 	DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, dbcr0));
+-	DEFINE(PT_PTRACED, PT_PTRACED);
+ #endif
+ #ifdef CONFIG_SPE
+ 	DEFINE(THREAD_EVR0, offsetof(struct thread_struct, evr[0]));
+@@ -325,6 +324,9 @@ int main(void)
+ 	DEFINE(PAGE_OFFSET_VSID, KERNEL_VSID(PAGE_OFFSET));
+ 	DEFINE(VMALLOC_START_ESID, GET_ESID(VMALLOC_START));
+ 	DEFINE(VMALLOC_START_VSID, KERNEL_VSID(VMALLOC_START));
++
++	/* alpaca */
++	DEFINE(ALPACA_SIZE, sizeof(struct alpaca));
+ #endif
+ 
+ 	DEFINE(PGD_TABLE_SIZE, PGD_TABLE_SIZE);
+--- a/arch/powerpc/kernel/btext.c
++++ b/arch/powerpc/kernel/btext.c
+@@ -7,6 +7,7 @@
+ #include <linux/string.h>
+ #include <linux/init.h>
+ #include <linux/module.h>
++#include <linux/lmb.h>
+ 
+ #include <asm/sections.h>
+ #include <asm/prom.h>
+@@ -15,7 +16,7 @@
+ #include <asm/mmu.h>
+ #include <asm/pgtable.h>
+ #include <asm/io.h>
+-#include <asm/lmb.h>
++#include <asm/prom.h>
+ #include <asm/processor.h>
+ #include <asm/udbg.h>
+ 
+--- a/arch/powerpc/kernel/cpu_setup_44x.S
++++ b/arch/powerpc/kernel/cpu_setup_44x.S
+@@ -3,7 +3,7 @@
+  * Valentine Barshak <vbarshak@ru.mvista.com>
+  * MontaVista Software, Inc (c) 2007
+  *
+- * Based on cpu_setup_6xx code by 
++ * Based on cpu_setup_6xx code by
+  * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+  *
+  * This program is free software; you can redistribute it and/or
+@@ -32,6 +32,9 @@ _GLOBAL(__setup_cpu_440grx)
+ 	bl	__fixup_440A_mcheck
+ 	mtlr	r4
+ 	blr
++_GLOBAL(__setup_cpu_460ex)
++_GLOBAL(__setup_cpu_460gt)
++	b	__init_fpu_44x
+ _GLOBAL(__setup_cpu_440gx)
+ _GLOBAL(__setup_cpu_440spe)
+ 	b	__fixup_440A_mcheck
+--- a/arch/powerpc/kernel/cputable.c
++++ b/arch/powerpc/kernel/cputable.c
+@@ -36,6 +36,8 @@ extern void __setup_cpu_440epx(unsigned 
+ extern void __setup_cpu_440gx(unsigned long offset, struct cpu_spec* spec);
+ extern void __setup_cpu_440grx(unsigned long offset, struct cpu_spec* spec);
+ extern void __setup_cpu_440spe(unsigned long offset, struct cpu_spec* spec);
++extern void __setup_cpu_460ex(unsigned long offset, struct cpu_spec* spec);
++extern void __setup_cpu_460gt(unsigned long offset, struct cpu_spec* spec);
+ extern void __setup_cpu_603(unsigned long offset, struct cpu_spec* spec);
+ extern void __setup_cpu_604(unsigned long offset, struct cpu_spec* spec);
+ extern void __setup_cpu_750(unsigned long offset, struct cpu_spec* spec);
+@@ -1397,6 +1399,30 @@ static struct cpu_spec __initdata cpu_sp
+ 		.machine_check		= machine_check_440A,
+ 		.platform		= "ppc440",
+ 	},
++	{ /* 460EX */
++		.pvr_mask		= 0xffff0002,
++		.pvr_value		= 0x13020002,
++		.cpu_name		= "460EX",
++		.cpu_features		= CPU_FTRS_44X,
++		.cpu_user_features	= COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
++		.icache_bsize		= 32,
++		.dcache_bsize		= 32,
++		.cpu_setup		= __setup_cpu_460ex,
++		.machine_check		= machine_check_440A,
++		.platform		= "ppc440",
++	},
++	{ /* 460GT */
++		.pvr_mask		= 0xffff0002,
++		.pvr_value		= 0x13020000,
++		.cpu_name		= "460GT",
++		.cpu_features		= CPU_FTRS_44X,
++		.cpu_user_features	= COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
++		.icache_bsize		= 32,
++		.dcache_bsize		= 32,
++		.cpu_setup		= __setup_cpu_460gt,
++		.machine_check		= machine_check_440A,
++		.platform		= "ppc440",
++	},
+ #endif /* CONFIG_44x */
+ #ifdef CONFIG_FSL_BOOKE
+ #ifdef CONFIG_E200
+@@ -1512,7 +1538,7 @@ struct cpu_spec * __init identify_cpu(un
+ 				*t = *s;
+ 			*PTRRELOC(&cur_cpu_spec) = &the_cpu_spec;
+ #if defined(CONFIG_PPC64) || defined(CONFIG_BOOKE)
+-			/* ppc64 and booke expect identify_cpu to also call 
++			/* ppc64 and booke expect identify_cpu to also call
+ 			 * setup_cpu for that processor. I will consolidate
+ 			 * that at a later time, for now, just use #ifdef.
+ 			 * we also don't need to PTRRELOC the function pointer
+--- a/arch/powerpc/kernel/crash.c
++++ b/arch/powerpc/kernel/crash.c
+@@ -24,12 +24,13 @@
+ #include <linux/init.h>
+ #include <linux/irq.h>
+ #include <linux/types.h>
++#include <linux/lmb.h>
+ 
+ #include <asm/processor.h>
+ #include <asm/machdep.h>
+ #include <asm/kexec.h>
+ #include <asm/kdump.h>
+-#include <asm/lmb.h>
++#include <asm/prom.h>
+ #include <asm/firmware.h>
+ #include <asm/smp.h>
+ #include <asm/system.h>
+--- a/arch/powerpc/kernel/crash_dump.c
++++ b/arch/powerpc/kernel/crash_dump.c
+@@ -13,8 +13,9 @@
+ 
+ #include <linux/crash_dump.h>
+ #include <linux/bootmem.h>
++#include <linux/lmb.h>
+ #include <asm/kdump.h>
+-#include <asm/lmb.h>
++#include <asm/prom.h>
+ #include <asm/firmware.h>
+ #include <asm/uaccess.h>
+ 
+--- a/arch/powerpc/kernel/entry_32.S
++++ b/arch/powerpc/kernel/entry_32.S
+@@ -110,9 +110,9 @@ transfer_to_handler:
+ 	stw	r11,PT_REGS(r12)
+ #if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+ 	/* Check to see if the dbcr0 register is set up to debug.  Use the
+-	   single-step bit to do this. */
++	   internal debug mode bit to do this. */
+ 	lwz	r12,THREAD_DBCR0(r12)
+-	andis.	r12,r12,DBCR0_IC@h
++	andis.	r12,r12,DBCR0_IDM@h
+ 	beq+	3f
+ 	/* From user and task is ptraced - load up global dbcr0 */
+ 	li	r12,-1			/* clear all pending debug events */
+@@ -120,6 +120,12 @@ transfer_to_handler:
+ 	lis	r11,global_dbcr0@ha
+ 	tophys(r11,r11)
+ 	addi	r11,r11,global_dbcr0@l
++#ifdef CONFIG_SMP
++	rlwinm	r9,r1,0,0,(31-THREAD_SHIFT)
++	lwz	r9,TI_CPU(r9)
++	slwi	r9,r9,3
++	add	r11,r11,r9
++#endif
+ 	lwz	r12,0(r11)
+ 	mtspr	SPRN_DBCR0,r12
+ 	lwz	r12,4(r11)
+@@ -238,10 +244,10 @@ ret_from_syscall:
+ 	stw	r11,_CCR(r1)
+ syscall_exit_cont:
+ #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+-	/* If the process has its own DBCR0 value, load it up.  The single
+-	   step bit tells us that dbcr0 should be loaded. */
++	/* If the process has its own DBCR0 value, load it up.  The internal
++	   debug mode bit tells us that dbcr0 should be loaded. */
+ 	lwz	r0,THREAD+THREAD_DBCR0(r2)
+-	andis.	r10,r0,DBCR0_IC@h
++	andis.	r10,r0,DBCR0_IDM@h
+ 	bnel-	load_dbcr0
+ #endif
+ #ifdef CONFIG_44x
+@@ -666,10 +672,10 @@ user_exc_return:		/* r10 contains MSR_KE
+ 
+ restore_user:
+ #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+-	/* Check whether this process has its own DBCR0 value.  The single
+-	   step bit tells us that dbcr0 should be loaded. */
++	/* Check whether this process has its own DBCR0 value.  The internal
++	   debug mode bit tells us that dbcr0 should be loaded. */
+ 	lwz	r0,THREAD+THREAD_DBCR0(r2)
+-	andis.	r10,r0,DBCR0_IC@h
++	andis.	r10,r0,DBCR0_IDM@h
+ 	bnel-	load_dbcr0
+ #endif
+ 
+@@ -879,6 +885,12 @@ load_dbcr0:
+ 	mfspr	r10,SPRN_DBCR0
+ 	lis	r11,global_dbcr0@ha
+ 	addi	r11,r11,global_dbcr0@l
++#ifdef CONFIG_SMP
++	rlwinm	r9,r1,0,0,(31-THREAD_SHIFT)
++	lwz	r9,TI_CPU(r9)
++	slwi	r9,r9,3
++	add	r11,r11,r9
++#endif
+ 	stw	r10,0(r11)
+ 	mtspr	SPRN_DBCR0,r0
+ 	lwz	r10,4(r11)
+@@ -891,7 +903,7 @@ load_dbcr0:
+ 	.section .bss
+ 	.align	4
+ global_dbcr0:
+-	.space	8
++	.space	8*NR_CPUS
+ 	.previous
+ #endif /* !(CONFIG_4xx || CONFIG_BOOKE) */
+ 
+--- a/arch/powerpc/kernel/entry_64.S
++++ b/arch/powerpc/kernel/entry_64.S
+@@ -29,6 +29,8 @@
+ #include <asm/cputable.h>
+ #include <asm/firmware.h>
+ #include <asm/bug.h>
++#include <asm/ptrace.h>
++#include <asm/irqflags.h>
+ 
+ /*
+  * System calls.
+@@ -39,7 +41,7 @@
+ 
+ /* This value is used to mark exception frames on the stack. */
+ exception_marker:
+-	.tc	ID_72656773_68657265[TC],0x7265677368657265
++	.tc	ID_EXC_MARKER[TC],STACK_FRAME_REGS_MARKER
+ 
+ 	.section	".text"
+ 	.align 7
+@@ -88,6 +90,14 @@ system_call_common:
+ 	addi	r9,r1,STACK_FRAME_OVERHEAD
+ 	ld	r11,exception_marker@toc(r2)
+ 	std	r11,-16(r9)		/* "regshere" marker */
++#ifdef CONFIG_TRACE_IRQFLAGS
++	bl	.trace_hardirqs_on
++	REST_GPR(0,r1)
++	REST_4GPRS(3,r1)
++	REST_2GPRS(7,r1)
++	addi	r9,r1,STACK_FRAME_OVERHEAD
++	ld	r12,_MSR(r1)
++#endif /* CONFIG_TRACE_IRQFLAGS */
+ 	li	r10,1
+ 	stb	r10,PACASOFTIRQEN(r13)
+ 	stb	r10,PACAHARDIRQEN(r13)
+@@ -102,7 +112,7 @@ BEGIN_FW_FTR_SECTION
+ 	b	hardware_interrupt_entry
+ 2:
+ END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
+-#endif
++#endif /* CONFIG_PPC_ISERIES */
+ 	mfmsr	r11
+ 	ori	r11,r11,MSR_EE
+ 	mtmsrd	r11,1
+@@ -504,6 +514,10 @@ BEGIN_FW_FTR_SECTION
+ 
+ 	li	r3,0
+ 	stb	r3,PACASOFTIRQEN(r13)	/* ensure we are soft-disabled */
++#ifdef CONFIG_TRACE_IRQFLAGS
++	bl	.trace_hardirqs_off
++	mfmsr	r10
++#endif
+ 	ori	r10,r10,MSR_EE
+ 	mtmsrd	r10			/* hard-enable again */
+ 	addi	r3,r1,STACK_FRAME_OVERHEAD
+@@ -512,7 +526,7 @@ BEGIN_FW_FTR_SECTION
+ 4:
+ END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
+ #endif
+-	stb	r5,PACASOFTIRQEN(r13)
++	TRACE_AND_RESTORE_IRQ(r5);
+ 
+ 	/* extract EE bit and use it to restore paca->hard_enabled */
+ 	ld	r3,_MSR(r1)
+@@ -580,6 +594,16 @@ do_work:
+ 	bne	restore
+ 	/* here we are preempting the current task */
+ 1:
++#ifdef CONFIG_TRACE_IRQFLAGS
++	bl	.trace_hardirqs_on
++	/* Note: we just clobbered r10 which used to contain the previous
++	 * MSR before the hard-disabling done by the caller of do_work.
++	 * We don't have that value anymore, but it doesn't matter as
++	 * we will hard-enable unconditionally, we can just reload the
++	 * current MSR into r10
++	 */
++	mfmsr	r10
++#endif /* CONFIG_TRACE_IRQFLAGS */
+ 	li	r0,1
+ 	stb	r0,PACASOFTIRQEN(r13)
+ 	stb	r0,PACAHARDIRQEN(r13)
+--- a/arch/powerpc/kernel/head_32.S
++++ b/arch/powerpc/kernel/head_32.S
+@@ -30,6 +30,7 @@
+ #include <asm/thread_info.h>
+ #include <asm/ppc_asm.h>
+ #include <asm/asm-offsets.h>
++#include <asm/ptrace.h>
+ 
+ /* 601 only have IBAT; cr0.eq is set on 601 when using this macro */
+ #define LOAD_BAT(n, reg, RA, RB)	\
+@@ -268,8 +269,8 @@ __secondary_hold_acknowledge:
+ 	li	r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \
+ 	MTMSRD(r10);			/* (except for mach check in rtas) */ \
+ 	stw	r0,GPR0(r11);	\
+-	lis	r10,0x7265;		/* put exception frame marker */ \
+-	addi	r10,r10,0x6773;	\
++	lis	r10,STACK_FRAME_REGS_MARKER@ha; /* exception frame marker */ \
++	addi	r10,r10,STACK_FRAME_REGS_MARKER@l; \
+ 	stw	r10,8(r11);	\
+ 	SAVE_4GPRS(3, r11);	\
+ 	SAVE_2GPRS(7, r11)
+@@ -763,23 +764,6 @@ load_up_altivec:
+ 	b	fast_exception_return
+ 
+ /*
+- * AltiVec unavailable trap from kernel - print a message, but let
+- * the task use AltiVec in the kernel until it returns to user mode.
+- */
+-KernelAltiVec:
+-	lwz	r3,_MSR(r1)
+-	oris	r3,r3,MSR_VEC@h
+-	stw	r3,_MSR(r1)	/* enable use of AltiVec after return */
+-	lis	r3,87f@h
+-	ori	r3,r3,87f@l
+-	mr	r4,r2		/* current */
+-	lwz	r5,_NIP(r1)
+-	bl	printk
+-	b	ret_from_except
+-87:	.string	"AltiVec used in kernel  (task=%p, pc=%x)  \n"
+-	.align	4,0
+-
+-/*
+  * giveup_altivec(tsk)
+  * Disable AltiVec for the task given as the argument,
+  * and save the AltiVec registers in its thread_struct.
+--- a/arch/powerpc/kernel/head_44x.S
++++ b/arch/powerpc/kernel/head_44x.S
+@@ -211,7 +211,7 @@ skpinv:	addi	r4,r4,1				/* Increment */
+ 	SET_IVOR(12, WatchdogTimer);
+ 	SET_IVOR(13, DataTLBError);
+ 	SET_IVOR(14, InstructionTLBError);
+-	SET_IVOR(15, Debug);
++	SET_IVOR(15, DebugCrit);
+ 
+ 	/* Establish the interrupt vector base */
+ 	lis	r4,interrupt_base@h	/* IVPR only uses the high 16-bits */
+@@ -578,7 +578,7 @@ interrupt_base:
+ 	b	InstructionStorage
+ 
+ 	/* Debug Interrupt */
+-	DEBUG_EXCEPTION
++	DEBUG_CRIT_EXCEPTION
+ 
+ /*
+  * Local functions
+--- a/arch/powerpc/kernel/head_64.S
++++ b/arch/powerpc/kernel/head_64.S
+@@ -36,8 +36,7 @@
+ #include <asm/firmware.h>
+ #include <asm/page_64.h>
+ #include <asm/exception.h>
+-
+-#define DO_SOFT_DISABLE
++#include <asm/irqflags.h>
+ 
+ /*
+  * We layout physical memory as follows:
+@@ -450,8 +449,8 @@ bad_stack:
+  */
+ fast_exc_return_irq:			/* restores irq state too */
+ 	ld	r3,SOFTE(r1)
++	TRACE_AND_RESTORE_IRQ(r3);
+ 	ld	r12,_MSR(r1)
+-	stb	r3,PACASOFTIRQEN(r13)	/* restore paca->soft_enabled */
+ 	rldicl	r4,r12,49,63		/* get MSR_EE to LSB */
+ 	stb	r4,PACAHARDIRQEN(r13)	/* restore paca->hard_enabled */
+ 	b	1f
+@@ -621,7 +620,7 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISER
+ 	mtlr	r10
+ 
+ 	andi.	r10,r12,MSR_RI	/* check for unrecoverable exception */
+-	beq-	unrecov_slb
++	beq-	2f
+ 
+ .machine	push
+ .machine	"power4"
+@@ -643,6 +642,22 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISER
+ 	rfid
+ 	b	.	/* prevent speculative execution */
+ 
++2:
++#ifdef CONFIG_PPC_ISERIES
++BEGIN_FW_FTR_SECTION
++	b	unrecov_slb
++END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
++#endif /* CONFIG_PPC_ISERIES */
++	mfspr	r11,SPRN_SRR0
++	clrrdi	r10,r13,32
++	LOAD_HANDLER(r10,unrecov_slb)
++	mtspr	SPRN_SRR0,r10
++	mfmsr	r10
++	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI
++	mtspr	SPRN_SRR1,r10
++	rfid
++	b	.
++
+ unrecov_slb:
+ 	EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
+ 	DISABLE_INTS
+@@ -808,7 +823,7 @@ _STATIC(load_up_altivec)
+  * Hash table stuff
+  */
+ 	.align	7
+-_GLOBAL(do_hash_page)
++_STATIC(do_hash_page)
+ 	std	r3,_DAR(r1)
+ 	std	r4,_DSISR(r1)
+ 
+@@ -820,6 +835,27 @@ BEGIN_FTR_SECTION
+ END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
+ 
+ 	/*
++	 * On iSeries, we soft-disable interrupts here, then
++	 * hard-enable interrupts so that the hash_page code can spin on
++	 * the hash_table_lock without problems on a shared processor.
++	 */
++	DISABLE_INTS
++
++	/*
++	 * Currently, trace_hardirqs_off() will be called by DISABLE_INTS
++	 * and will clobber volatile registers when irq tracing is enabled
++	 * so we need to reload them. It may be possible to be smarter here
++	 * and move the irq tracing elsewhere but let's keep it simple for
++	 * now
++	 */
++#ifdef CONFIG_TRACE_IRQFLAGS
++	ld	r3,_DAR(r1)
++	ld	r4,_DSISR(r1)
++	ld	r5,_TRAP(r1)
++	ld	r12,_MSR(r1)
++	clrrdi	r5,r5,4
++#endif /* CONFIG_TRACE_IRQFLAGS */
++	/*
+ 	 * We need to set the _PAGE_USER bit if MSR_PR is set or if we are
+ 	 * accessing a userspace segment (even from the kernel). We assume
+ 	 * kernel addresses always have the high bit set.
+@@ -832,13 +868,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
+ 	rlwimi	r4,r5,22+2,31-2,31-2	/* Set _PAGE_EXEC if trap is 0x400 */
+ 
+ 	/*
+-	 * On iSeries, we soft-disable interrupts here, then
+-	 * hard-enable interrupts so that the hash_page code can spin on
+-	 * the hash_table_lock without problems on a shared processor.
+-	 */
+-	DISABLE_INTS
+-
+-	/*
+ 	 * r3 contains the faulting address
+ 	 * r4 contains the required access permissions
+ 	 * r5 contains the trap number
+@@ -848,7 +877,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
+ 	bl	.hash_page		/* build HPTE if possible */
+ 	cmpdi	r3,0			/* see if hash_page succeeded */
+ 
+-#ifdef DO_SOFT_DISABLE
+ BEGIN_FW_FTR_SECTION
+ 	/*
+ 	 * If we had interrupts soft-enabled at the point where the
+@@ -860,7 +888,7 @@ BEGIN_FW_FTR_SECTION
+ 	 */
+ 	beq	13f
+ END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
+-#endif
++
+ BEGIN_FW_FTR_SECTION
+ 	/*
+ 	 * Here we have interrupts hard-disabled, so it is sufficient
+@@ -874,11 +902,12 @@ END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISER
+ 
+ 	/*
+ 	 * hash_page couldn't handle it, set soft interrupt enable back
+-	 * to what it was before the trap.  Note that .local_irq_restore
++	 * to what it was before the trap.  Note that .raw_local_irq_restore
+ 	 * handles any interrupts pending at this point.
+ 	 */
+ 	ld	r3,SOFTE(r1)
+-	bl	.local_irq_restore
++	TRACE_AND_RESTORE_IRQ_PARTIAL(r3, 11f)
++	bl	.raw_local_irq_restore
+ 	b	11f
+ 
+ /* Here we have a page fault that hash_page can't handle. */
+@@ -1477,6 +1506,10 @@ _INIT_STATIC(start_here_multiplatform)
+ 	addi	r2,r2,0x4000
+ 	add	r2,r2,r26
+ 
++	/* Set initial ptr to current */
++	LOAD_REG_IMMEDIATE(r4, init_task)
++	std	r4,PACACURRENT(r13)
++
+ 	/* Do very early kernel initializations, including initial hash table,
+ 	 * stab and slb setup before we turn on relocation.	*/
+ 
+@@ -1505,10 +1538,6 @@ _INIT_GLOBAL(start_here_common)
+ 	li	r0,0
+ 	stdu	r0,-STACK_FRAME_OVERHEAD(r1)
+ 
+-	/* ptr to current */
+-	LOAD_REG_IMMEDIATE(r4, init_task)
+-	std	r4,PACACURRENT(r13)
+-
+ 	/* Load the TOC */
+ 	ld	r2,PACATOC(r13)
+ 	std	r1,PACAKSAVE(r13)
+--- a/arch/powerpc/kernel/head_booke.h
++++ b/arch/powerpc/kernel/head_booke.h
+@@ -56,8 +56,17 @@
+  * is necessary since the MMU is always on, for Book-E parts, and the stacks
+  * are offset from KERNELBASE.
+  *
++ * There is some space optimization to be had here if desired.  However
++ * to allow for a common kernel with support for debug exceptions either
++ * going to critical or their own debug level we aren't currently
++ * providing configurations that micro-optimize space usage.
+  */
+-#define BOOKE_EXCEPTION_STACK_SIZE	(8192)
++#ifdef CONFIG_44x
++#define NUM_EXCEPTION_LVLS	2
++#else
++#define NUM_EXCEPTION_LVLS	3
++#endif
++#define BOOKE_EXCEPTION_STACK_SIZE	(4096 * NUM_EXCEPTION_LVLS)
+ 
+ /* CRIT_SPRG only used in critical exception handling */
+ #define CRIT_SPRG	SPRN_SPRG2
+@@ -68,7 +77,7 @@
+ #define CRIT_STACK_TOP		(exception_stack_top)
+ 
+ /* only on e200 for now */
+-#define DEBUG_STACK_TOP		(exception_stack_top - 4096)
++#define DEBUG_STACK_TOP		(exception_stack_top - 8192)
+ #define DEBUG_SPRG		SPRN_SPRG6W
+ 
+ #ifdef CONFIG_SMP
+@@ -212,9 +221,8 @@ label:
+  * save (and later restore) the MSR via SPRN_CSRR1, which will still have
+  * the MSR_DE bit set.
+  */
+-#ifdef CONFIG_E200
+-#define DEBUG_EXCEPTION							      \
+-	START_EXCEPTION(Debug);						      \
++#define DEBUG_DEBUG_EXCEPTION						      \
++	START_EXCEPTION(DebugDebug);					      \
+ 	DEBUG_EXCEPTION_PROLOG;						      \
+ 									      \
+ 	/*								      \
+@@ -234,8 +242,8 @@ label:
+ 	cmplw	r12,r10;						      \
+ 	blt+	2f;			/* addr below exception vectors */    \
+ 									      \
+-	lis	r10,Debug@h;						      \
+-	ori	r10,r10,Debug@l;					      \
++	lis	r10,DebugDebug@h;					      \
++	ori	r10,r10,DebugDebug@l;					      \
+ 	cmplw	r12,r10;						      \
+ 	bgt+	2f;			/* addr above exception vectors */    \
+ 									      \
+@@ -265,9 +273,9 @@ label:
+ 2:	mfspr	r4,SPRN_DBSR;						      \
+ 	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
+ 	EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, debug_transfer_to_handler, ret_from_debug_exc)
+-#else
+-#define DEBUG_EXCEPTION							      \
+-	START_EXCEPTION(Debug);						      \
++
++#define DEBUG_CRIT_EXCEPTION						      \
++	START_EXCEPTION(DebugCrit);					      \
+ 	CRITICAL_EXCEPTION_PROLOG;					      \
+ 									      \
+ 	/*								      \
+@@ -287,8 +295,8 @@ label:
+ 	cmplw	r12,r10;						      \
+ 	blt+	2f;			/* addr below exception vectors */    \
+ 									      \
+-	lis	r10,Debug@h;						      \
+-	ori	r10,r10,Debug@l;					      \
++	lis	r10,DebugCrit@h;						      \
++	ori	r10,r10,DebugCrit@l;					      \
+ 	cmplw	r12,r10;						      \
+ 	bgt+	2f;			/* addr above exception vectors */    \
+ 									      \
+@@ -318,7 +326,6 @@ label:
+ 2:	mfspr	r4,SPRN_DBSR;						      \
+ 	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
+ 	EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
+-#endif
+ 
+ #define INSTRUCTION_STORAGE_EXCEPTION					      \
+ 	START_EXCEPTION(InstructionStorage)				      \
+--- a/arch/powerpc/kernel/head_fsl_booke.S
++++ b/arch/powerpc/kernel/head_fsl_booke.S
+@@ -68,7 +68,9 @@ _ENTRY(_start);
+ 	mr	r29,r5
+ 	mr	r28,r6
+ 	mr	r27,r7
++	li	r25,0		/* phys kernel start (low) */
+ 	li	r24,0		/* CPU number */
++	li	r23,0		/* phys kernel start (high) */
+ 
+ /* We try to not make any assumptions about how the boot loader
+  * setup or used the TLBs.  We invalidate all mappings from the
+@@ -167,7 +169,28 @@ skpinv:	addi	r6,r6,1				/* Increment */
+ 	mtspr	SPRN_MAS0,r7
+ 	tlbre
+ 
+-	/* Just modify the entry ID, EPN and RPN for the temp mapping */
++	/* grab and fixup the RPN */
++	mfspr	r6,SPRN_MAS1	/* extract MAS1[SIZE] */
++	rlwinm	r6,r6,25,27,30
++	li	r8,-1
++	addi	r6,r6,10
++	slw	r6,r8,r6	/* convert to mask */
++
++	bl	1f		/* Find our address */
++1:	mflr	r7
++
++	mfspr	r8,SPRN_MAS3
++#ifdef CONFIG_PHYS_64BIT
++	mfspr	r23,SPRN_MAS7
++#endif
++	and	r8,r6,r8
++	subfic	r9,r6,-4096
++	and	r9,r9,r7
++
++	or	r25,r8,r9
++	ori	r8,r25,(MAS3_SX|MAS3_SW|MAS3_SR)
++
++	/* Just modify the entry ID and EPN for the temp mapping */
+ 	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
+ 	rlwimi	r7,r5,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r5) */
+ 	mtspr	SPRN_MAS0,r7
+@@ -177,12 +200,10 @@ skpinv:	addi	r6,r6,1				/* Increment */
+ 	ori	r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_4K))@l
+ 	mtspr	SPRN_MAS1,r6
+ 	mfspr	r6,SPRN_MAS2
+-	lis	r7,PHYSICAL_START@h
++	li	r7,0		/* temp EPN = 0 */
+ 	rlwimi	r7,r6,0,20,31
+ 	mtspr	SPRN_MAS2,r7
+-	mfspr	r6,SPRN_MAS3
+-	rlwimi	r7,r6,0,20,31
+-	mtspr	SPRN_MAS3,r7
++	mtspr	SPRN_MAS3,r8
+ 	tlbwe
+ 
+ 	xori	r6,r4,1
+@@ -232,8 +253,7 @@ skpinv:	addi	r6,r6,1				/* Increment */
+ 	ori	r6,r6,PAGE_OFFSET@l
+ 	rlwimi	r6,r7,0,20,31
+ 	mtspr	SPRN_MAS2,r6
+-	li	r7,(MAS3_SX|MAS3_SW|MAS3_SR)
+-	mtspr	SPRN_MAS3,r7
++	mtspr	SPRN_MAS3,r8
+ 	tlbwe
+ 
+ /* 7. Jump to KERNELBASE mapping */
+@@ -283,7 +303,10 @@ skpinv:	addi	r6,r6,1				/* Increment */
+ 	SET_IVOR(12, WatchdogTimer);
+ 	SET_IVOR(13, DataTLBError);
+ 	SET_IVOR(14, InstructionTLBError);
+-	SET_IVOR(15, Debug);
++	SET_IVOR(15, DebugDebug);
++#if defined(CONFIG_E500)
++	SET_IVOR(15, DebugCrit);
++#endif
+ 	SET_IVOR(32, SPEUnavailable);
+ 	SET_IVOR(33, SPEFloatingPointData);
+ 	SET_IVOR(34, SPEFloatingPointRound);
+@@ -718,7 +741,10 @@ interrupt_base:
+ 
+ 
+ 	/* Debug Interrupt */
+-	DEBUG_EXCEPTION
++	DEBUG_DEBUG_EXCEPTION
++#if defined(CONFIG_E500)
++	DEBUG_CRIT_EXCEPTION
++#endif
+ 
+ /*
+  * Local functions
+--- a/arch/powerpc/kernel/ibmebus.c
++++ b/arch/powerpc/kernel/ibmebus.c
+@@ -183,7 +183,7 @@ static int ibmebus_create_devices(const 
+ 		ret = ibmebus_create_device(child);
+ 		if (ret) {
+ 			printk(KERN_ERR "%s: failed to create device (%i)",
+-			       __FUNCTION__, ret);
++			       __func__, ret);
+ 			of_node_put(child);
+ 			break;
+ 		}
+@@ -269,7 +269,7 @@ static ssize_t ibmebus_store_probe(struc
+ 	if (bus_find_device(&ibmebus_bus_type, NULL, path,
+ 			    ibmebus_match_path)) {
+ 		printk(KERN_WARNING "%s: %s has already been probed\n",
+-		       __FUNCTION__, path);
++		       __func__, path);
+ 		rc = -EEXIST;
+ 		goto out;
+ 	}
+@@ -279,7 +279,7 @@ static ssize_t ibmebus_store_probe(struc
+ 		of_node_put(dn);
+ 	} else {
+ 		printk(KERN_WARNING "%s: no such device node: %s\n",
+-		       __FUNCTION__, path);
++		       __func__, path);
+ 		rc = -ENODEV;
+ 	}
+ 
+@@ -308,7 +308,7 @@ static ssize_t ibmebus_store_remove(stru
+ 		return count;
+ 	} else {
+ 		printk(KERN_WARNING "%s: %s not on the bus\n",
+-		       __FUNCTION__, path);
++		       __func__, path);
+ 
+ 		kfree(path);
+ 		return -ENODEV;
+@@ -337,14 +337,14 @@ static int __init ibmebus_bus_init(void)
+ 	err = of_bus_type_init(&ibmebus_bus_type, "ibmebus");
+ 	if (err) {
+ 		printk(KERN_ERR "%s: failed to register IBM eBus.\n",
+-		       __FUNCTION__);
++		       __func__);
+ 		return err;
+ 	}
+ 
+ 	err = device_register(&ibmebus_bus_device);
+ 	if (err) {
+ 		printk(KERN_WARNING "%s: device_register returned %i\n",
+-		       __FUNCTION__, err);
++		       __func__, err);
+ 		bus_unregister(&ibmebus_bus_type);
+ 
+ 		return err;
+--- a/arch/powerpc/kernel/iommu.c
++++ b/arch/powerpc/kernel/iommu.c
+@@ -520,7 +520,7 @@ void iommu_free_table(struct iommu_table
+ 	unsigned int order;
+ 
+ 	if (!tbl || !tbl->it_map) {
+-		printk(KERN_ERR "%s: expected TCE map for %s\n", __FUNCTION__,
++		printk(KERN_ERR "%s: expected TCE map for %s\n", __func__,
+ 				node_name);
+ 		return;
+ 	}
+@@ -530,7 +530,7 @@ void iommu_free_table(struct iommu_table
+ 	for (i = 0; i < (tbl->it_size/64); i++) {
+ 		if (tbl->it_map[i] != 0) {
+ 			printk(KERN_WARNING "%s: Unexpected TCEs for %s\n",
+-				__FUNCTION__, node_name);
++				__func__, node_name);
+ 			break;
+ 		}
+ 	}
+--- a/arch/powerpc/kernel/irq.c
++++ b/arch/powerpc/kernel/irq.c
+@@ -114,7 +114,7 @@ static inline void set_soft_enabled(unsi
+ 	: : "r" (enable), "i" (offsetof(struct paca_struct, soft_enabled)));
+ }
+ 
+-void local_irq_restore(unsigned long en)
++void raw_local_irq_restore(unsigned long en)
+ {
+ 	/*
+ 	 * get_paca()->soft_enabled = en;
+@@ -174,6 +174,7 @@ void local_irq_restore(unsigned long en)
+ 
+ 	__hard_irq_enable();
+ }
++EXPORT_SYMBOL(raw_local_irq_restore);
+ #endif /* CONFIG_PPC64 */
+ 
+ int show_interrupts(struct seq_file *p, void *v)
+@@ -310,8 +311,21 @@ void do_IRQ(struct pt_regs *regs)
+ 				handler = &__do_IRQ;
+ 			irqtp->task = curtp->task;
+ 			irqtp->flags = 0;
++
++			/* Copy the softirq bits in preempt_count so that the
++			 * softirq checks work in the hardirq context.
++			 */
++			irqtp->preempt_count =
++				(irqtp->preempt_count & ~SOFTIRQ_MASK) |
++				(curtp->preempt_count & SOFTIRQ_MASK);
++
+ 			call_handle_irq(irq, desc, irqtp, handler);
+ 			irqtp->task = NULL;
++
++
++			/* Set any flag that may have been set on the
++			 * alternate stack
++			 */
+ 			if (irqtp->flags)
+ 				set_bits(irqtp->flags, &curtp->flags);
+ 		} else
+@@ -357,7 +371,7 @@ void irq_ctx_init(void)
+ 		memset((void *)softirq_ctx[i], 0, THREAD_SIZE);
+ 		tp = softirq_ctx[i];
+ 		tp->cpu = i;
+-		tp->preempt_count = SOFTIRQ_OFFSET;
++		tp->preempt_count = 0;
+ 
+ 		memset((void *)hardirq_ctx[i], 0, THREAD_SIZE);
+ 		tp = hardirq_ctx[i];
+--- a/arch/powerpc/kernel/isa-bridge.c
++++ b/arch/powerpc/kernel/isa-bridge.c
+@@ -80,13 +80,13 @@ static void __devinit pci_process_ISA_OF
+ 	 *			(size depending on dev->n_addr_cells)
+ 	 *   cell 5:		the size of the range
+ 	 */
+-	if ((range->isa_addr.a_hi && ISA_SPACE_MASK) != ISA_SPACE_IO) {
++	if ((range->isa_addr.a_hi & ISA_SPACE_MASK) != ISA_SPACE_IO) {
+ 		range++;
+ 		rlen -= sizeof(struct isa_range);
+ 		if (rlen < sizeof(struct isa_range))
+ 			goto inval_range;
+ 	}
+-	if ((range->isa_addr.a_hi && ISA_SPACE_MASK) != ISA_SPACE_IO)
++	if ((range->isa_addr.a_hi & ISA_SPACE_MASK) != ISA_SPACE_IO)
+ 		goto inval_range;
+ 
+ 	isa_addr = range->isa_addr.a_lo;
+@@ -99,7 +99,7 @@ static void __devinit pci_process_ISA_OF
+ 	 */
+ 	if ((pci_addr != 0) || (isa_addr != 0)) {
+ 		printk(KERN_ERR "unexpected isa to pci mapping: %s\n",
+-		       __FUNCTION__);
++		       __func__);
+ 		return;
+ 	}
+ 
+--- a/arch/powerpc/kernel/lparcfg.c
++++ b/arch/powerpc/kernel/lparcfg.c
+@@ -226,7 +226,7 @@ static void parse_system_parameter_strin
+ 	unsigned char *local_buffer = kmalloc(SPLPAR_MAXLENGTH, GFP_KERNEL);
+ 	if (!local_buffer) {
+ 		printk(KERN_ERR "%s %s kmalloc failure at line %d \n",
+-		       __FILE__, __FUNCTION__, __LINE__);
++		       __FILE__, __func__, __LINE__);
+ 		return;
+ 	}
+ 
+@@ -243,14 +243,14 @@ static void parse_system_parameter_strin
+ 	if (call_status != 0) {
+ 		printk(KERN_INFO
+ 		       "%s %s Error calling get-system-parameter (0x%x)\n",
+-		       __FILE__, __FUNCTION__, call_status);
++		       __FILE__, __func__, call_status);
+ 	} else {
+ 		int splpar_strlen;
+ 		int idx, w_idx;
+ 		char *workbuffer = kzalloc(SPLPAR_MAXLENGTH, GFP_KERNEL);
+ 		if (!workbuffer) {
+ 			printk(KERN_ERR "%s %s kmalloc failure at line %d \n",
+-			       __FILE__, __FUNCTION__, __LINE__);
++			       __FILE__, __func__, __LINE__);
+ 			kfree(local_buffer);
+ 			return;
+ 		}
+@@ -484,10 +484,10 @@ static ssize_t lparcfg_write(struct file
+ 	current_weight = (resource >> 5 * 8) & 0xFF;
+ 
+ 	pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
+-		 __FUNCTION__, current_entitled, current_weight);
++		 __func__, current_entitled, current_weight);
+ 
+ 	pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
+-		 __FUNCTION__, *new_entitled_ptr, *new_weight_ptr);
++		 __func__, *new_entitled_ptr, *new_weight_ptr);
+ 
+ 	retval = plpar_hcall_norets(H_SET_PPP, *new_entitled_ptr,
+ 				    *new_weight_ptr);
+@@ -502,7 +502,7 @@ static ssize_t lparcfg_write(struct file
+ 		retval = -EINVAL;
+ 	} else {
+ 		printk(KERN_WARNING "%s: received unknown hv return code %ld",
+-		       __FUNCTION__, retval);
++		       __func__, retval);
+ 		retval = -EIO;
+ 	}
+ 
+--- a/arch/powerpc/kernel/machine_kexec.c
++++ b/arch/powerpc/kernel/machine_kexec.c
+@@ -12,8 +12,9 @@
+ #include <linux/kexec.h>
+ #include <linux/reboot.h>
+ #include <linux/threads.h>
++#include <linux/lmb.h>
+ #include <asm/machdep.h>
+-#include <asm/lmb.h>
++#include <asm/prom.h>
+ 
+ void machine_crash_shutdown(struct pt_regs *regs)
+ {
+--- a/arch/powerpc/kernel/paca.c
++++ b/arch/powerpc/kernel/paca.c
+@@ -15,7 +15,6 @@
+ #include <asm/ptrace.h>
+ #include <asm/page.h>
+ #include <asm/lppaca.h>
+-#include <asm/iseries/it_lp_reg_save.h>
+ #include <asm/paca.h>
+ #include <asm/mmu.h>
+ 
+@@ -25,13 +24,13 @@
+ extern unsigned long __toc_start;
+ 
+ /*
+- * iSeries structure which the hypervisor knows about - this structure
++ * The structure which the hypervisor knows about - this structure
+  * should not cross a page boundary.  The vpa_init/register_vpa call
+  * is now known to fail if the lppaca structure crosses a page
+- * boundary.  The lppaca is also used on POWER5 pSeries boxes.  The
+- * lppaca is 640 bytes long, and cannot readily change since the
+- * hypervisor knows its layout, so a 1kB alignment will suffice to
+- * ensure that it doesn't cross a page boundary.
++ * boundary.  The lppaca is also used on legacy iSeries and POWER5
++ * pSeries boxes.  The lppaca is 640 bytes long, and cannot readily
++ * change since the hypervisor knows its layout, so a 1kB alignment
++ * will suffice to ensure that it doesn't cross a page boundary.
+  */
+ struct lppaca lppaca[] = {
+ 	[0 ... (NR_CPUS-1)] = {
+@@ -66,32 +65,17 @@ struct slb_shadow slb_shadow[] __cacheli
+  * processors.  The processor VPD array needs one entry per physical
+  * processor (not thread).
+  */
+-#define PACA_INIT_COMMON(number)					    \
++#define PACA_INIT(number)						    \
++{									    \
+ 	.lppaca_ptr = &lppaca[number],					    \
+ 	.lock_token = 0x8000,						    \
+ 	.paca_index = (number),		/* Paca Index */		    \
+ 	.kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL,		    \
+ 	.hw_cpu_id = 0xffff,						    \
+-	.slb_shadow_ptr = &slb_shadow[number],
+-
+-#ifdef CONFIG_PPC_ISERIES
+-#define PACA_INIT_ISERIES(number)					    \
+-	.reg_save_ptr = &iseries_reg_save[number],
+-
+-#define PACA_INIT(number)						    \
+-{									    \
+-	PACA_INIT_COMMON(number)					    \
+-	PACA_INIT_ISERIES(number)					    \
++	.slb_shadow_ptr = &slb_shadow[number],				    \
++	.__current = &init_task,					    \
+ }
+ 
+-#else
+-#define PACA_INIT(number)						    \
+-{									    \
+-	PACA_INIT_COMMON(number)					    \
+-}
+-
+-#endif
+-
+ struct paca_struct paca[] = {
+ 	PACA_INIT(0),
+ #if NR_CPUS > 1
+--- a/arch/powerpc/kernel/ppc_ksyms.c
++++ b/arch/powerpc/kernel/ppc_ksyms.c
+@@ -45,10 +45,6 @@
+ #include <asm/signal.h>
+ #include <asm/dcr.h>
+ 
+-#ifdef CONFIG_PPC64
+-EXPORT_SYMBOL(local_irq_restore);
+-#endif
+-
+ #ifdef CONFIG_PPC32
+ extern void transfer_to_handler(void);
+ extern void do_IRQ(struct pt_regs *regs);
+@@ -58,7 +54,6 @@ extern void program_check_exception(stru
+ extern void single_step_exception(struct pt_regs *regs);
+ extern int sys_sigreturn(struct pt_regs *regs);
+ 
+-EXPORT_SYMBOL(empty_zero_page);
+ EXPORT_SYMBOL(clear_pages);
+ EXPORT_SYMBOL(copy_page);
+ EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
+@@ -79,6 +74,7 @@ EXPORT_SYMBOL(strncpy);
+ EXPORT_SYMBOL(strcat);
+ EXPORT_SYMBOL(strlen);
+ EXPORT_SYMBOL(strcmp);
++EXPORT_SYMBOL(strncmp);
+ 
+ EXPORT_SYMBOL(csum_partial);
+ EXPORT_SYMBOL(csum_partial_copy_generic);
+@@ -192,3 +188,4 @@ EXPORT_SYMBOL(intercept_table);
+ EXPORT_SYMBOL(__mtdcr);
+ EXPORT_SYMBOL(__mfdcr);
+ #endif
++EXPORT_SYMBOL(empty_zero_page);
+--- a/arch/powerpc/kernel/process.c
++++ b/arch/powerpc/kernel/process.c
+@@ -868,11 +868,6 @@ int sys_execve(unsigned long a0, unsigne
+ 	flush_spe_to_thread(current);
+ 	error = do_execve(filename, (char __user * __user *) a1,
+ 			  (char __user * __user *) a2, regs);
+-	if (error == 0) {
+-		task_lock(current);
+-		current->ptrace &= ~PT_DTRACE;
+-		task_unlock(current);
+-	}
+ 	putname(filename);
+ out:
+ 	return error;
+@@ -919,20 +914,6 @@ int validate_sp(unsigned long sp, struct
+ 	return valid_irq_stack(sp, p, nbytes);
+ }
+ 
+-#ifdef CONFIG_PPC64
+-#define MIN_STACK_FRAME	112	/* same as STACK_FRAME_OVERHEAD, in fact */
+-#define FRAME_LR_SAVE	2
+-#define INT_FRAME_SIZE	(sizeof(struct pt_regs) + STACK_FRAME_OVERHEAD + 288)
+-#define REGS_MARKER	0x7265677368657265ul
+-#define FRAME_MARKER	12
+-#else
+-#define MIN_STACK_FRAME	16
+-#define FRAME_LR_SAVE	1
+-#define INT_FRAME_SIZE	(sizeof(struct pt_regs) + STACK_FRAME_OVERHEAD)
+-#define REGS_MARKER	0x72656773ul
+-#define FRAME_MARKER	2
+-#endif
+-
+ EXPORT_SYMBOL(validate_sp);
+ 
+ unsigned long get_wchan(struct task_struct *p)
+@@ -944,15 +925,15 @@ unsigned long get_wchan(struct task_stru
+ 		return 0;
+ 
+ 	sp = p->thread.ksp;
+-	if (!validate_sp(sp, p, MIN_STACK_FRAME))
++	if (!validate_sp(sp, p, STACK_FRAME_OVERHEAD))
+ 		return 0;
+ 
+ 	do {
+ 		sp = *(unsigned long *)sp;
+-		if (!validate_sp(sp, p, MIN_STACK_FRAME))
++		if (!validate_sp(sp, p, STACK_FRAME_OVERHEAD))
+ 			return 0;
+ 		if (count > 0) {
+-			ip = ((unsigned long *)sp)[FRAME_LR_SAVE];
++			ip = ((unsigned long *)sp)[STACK_FRAME_LR_SAVE];
+ 			if (!in_sched_functions(ip))
+ 				return ip;
+ 		}
+@@ -981,12 +962,12 @@ void show_stack(struct task_struct *tsk,
+ 	lr = 0;
+ 	printk("Call Trace:\n");
+ 	do {
+-		if (!validate_sp(sp, tsk, MIN_STACK_FRAME))
++		if (!validate_sp(sp, tsk, STACK_FRAME_OVERHEAD))
+ 			return;
+ 
+ 		stack = (unsigned long *) sp;
+ 		newsp = stack[0];
+-		ip = stack[FRAME_LR_SAVE];
++		ip = stack[STACK_FRAME_LR_SAVE];
+ 		if (!firstframe || ip != lr) {
+ 			printk("["REG"] ["REG"] ", sp, ip);
+ 			print_symbol("%s", ip);
+@@ -1000,8 +981,8 @@ void show_stack(struct task_struct *tsk,
+ 		 * See if this is an exception frame.
+ 		 * We look for the "regshere" marker in the current frame.
+ 		 */
+-		if (validate_sp(sp, tsk, INT_FRAME_SIZE)
+-		    && stack[FRAME_MARKER] == REGS_MARKER) {
++		if (validate_sp(sp, tsk, STACK_INT_FRAME_SIZE)
++		    && stack[STACK_FRAME_MARKER] == STACK_FRAME_REGS_MARKER) {
+ 			struct pt_regs *regs = (struct pt_regs *)
+ 				(sp + STACK_FRAME_OVERHEAD);
+ 			printk("--- Exception: %lx", regs->trap);
+--- a/arch/powerpc/kernel/prom.c
++++ b/arch/powerpc/kernel/prom.c
+@@ -31,10 +31,10 @@
+ #include <linux/kexec.h>
+ #include <linux/debugfs.h>
+ #include <linux/irq.h>
++#include <linux/lmb.h>
+ 
+ #include <asm/prom.h>
+ #include <asm/rtas.h>
+-#include <asm/lmb.h>
+ #include <asm/page.h>
+ #include <asm/processor.h>
+ #include <asm/irq.h>
+@@ -51,6 +51,7 @@
+ #include <asm/machdep.h>
+ #include <asm/pSeries_reconfig.h>
+ #include <asm/pci-bridge.h>
++#include <asm/phyp_dump.h>
+ #include <asm/kexec.h>
+ 
+ #ifdef DEBUG
+@@ -436,7 +437,7 @@ early_param("mem", early_parse_mem);
+  * The device tree may be allocated beyond our memory limit, or inside the
+  * crash kernel region for kdump. If so, move it out of the way.
+  */
+-static void move_device_tree(void)
++static void __init move_device_tree(void)
+ {
+ 	unsigned long start, size;
+ 	void *p;
+@@ -1040,6 +1041,87 @@ static void __init early_reserve_mem(voi
+ #endif
+ }
+ 
++#ifdef CONFIG_PHYP_DUMP
++/**
++ * phyp_dump_calculate_reserve_size() - reserve variable boot area 5% or arg
++ *
++ * Function to find the largest size we need to reserve
++ * during early boot process.
++ *
++ * It either looks for boot param and returns that OR
++ * returns larger of 256 or 5% rounded down to multiples of 256MB.
++ *
++ */
++static inline unsigned long phyp_dump_calculate_reserve_size(void)
++{
++	unsigned long tmp;
++
++	if (phyp_dump_info->reserve_bootvar)
++		return phyp_dump_info->reserve_bootvar;
++
++	/* divide by 20 to get 5% of value */
++	tmp = lmb_end_of_DRAM();
++	do_div(tmp, 20);
++
++	/* round it down in multiples of 256 */
++	tmp = tmp & ~0x0FFFFFFFUL;
++
++	return (tmp > PHYP_DUMP_RMR_END ? tmp : PHYP_DUMP_RMR_END);
++}
++
++/**
++ * phyp_dump_reserve_mem() - reserve all not-yet-dumped mmemory
++ *
++ * This routine may reserve memory regions in the kernel only
++ * if the system is supported and a dump was taken in last
++ * boot instance or if the hardware is supported and the
++ * scratch area needs to be setup. In other instances it returns
++ * without reserving anything. The memory in case of dump being
++ * active is freed when the dump is collected (by userland tools).
++ */
++static void __init phyp_dump_reserve_mem(void)
++{
++	unsigned long base, size;
++	unsigned long variable_reserve_size;
++
++	if (!phyp_dump_info->phyp_dump_configured) {
++		printk(KERN_ERR "Phyp-dump not supported on this hardware\n");
++		return;
++	}
++
++	if (!phyp_dump_info->phyp_dump_at_boot) {
++		printk(KERN_INFO "Phyp-dump disabled at boot time\n");
++		return;
++	}
++
++	variable_reserve_size = phyp_dump_calculate_reserve_size();
++
++	if (phyp_dump_info->phyp_dump_is_active) {
++		/* Reserve *everything* above RMR.Area freed by userland tools*/
++		base = variable_reserve_size;
++		size = lmb_end_of_DRAM() - base;
++
++		/* XXX crashed_ram_end is wrong, since it may be beyond
++		 * the memory_limit, it will need to be adjusted. */
++		lmb_reserve(base, size);
++
++		phyp_dump_info->init_reserve_start = base;
++		phyp_dump_info->init_reserve_size = size;
++	} else {
++		size = phyp_dump_info->cpu_state_size +
++			phyp_dump_info->hpte_region_size +
++			variable_reserve_size;
++		base = lmb_end_of_DRAM() - size;
++		lmb_reserve(base, size);
++		phyp_dump_info->init_reserve_start = base;
++		phyp_dump_info->init_reserve_size = size;
++	}
++}
++#else
++static inline void __init phyp_dump_reserve_mem(void) {}
++#endif /* CONFIG_PHYP_DUMP  && CONFIG_PPC_RTAS */
++
++
+ void __init early_init_devtree(void *params)
+ {
+ 	DBG(" -> early_init_devtree(%p)\n", params);
+@@ -1052,6 +1134,11 @@ void __init early_init_devtree(void *par
+ 	of_scan_flat_dt(early_init_dt_scan_rtas, NULL);
+ #endif
+ 
++#ifdef CONFIG_PHYP_DUMP
++	/* scan tree to see if dump occured during last boot */
++	of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL);
++#endif
++
+ 	/* Retrieve various informations from the /chosen node of the
+ 	 * device-tree, including the platform type, initrd location and
+ 	 * size, TCE reserve, and more ...
+@@ -1072,6 +1159,7 @@ void __init early_init_devtree(void *par
+ 	reserve_kdump_trampoline();
+ 	reserve_crashkernel();
+ 	early_reserve_mem();
++	phyp_dump_reserve_mem();
+ 
+ 	lmb_enforce_memory_limit(memory_limit);
+ 	lmb_analyze();
+@@ -1244,12 +1332,14 @@ EXPORT_SYMBOL(of_node_put);
+  */
+ void of_attach_node(struct device_node *np)
+ {
+-	write_lock(&devtree_lock);
++	unsigned long flags;
++
++	write_lock_irqsave(&devtree_lock, flags);
+ 	np->sibling = np->parent->child;
+ 	np->allnext = allnodes;
+ 	np->parent->child = np;
+ 	allnodes = np;
+-	write_unlock(&devtree_lock);
++	write_unlock_irqrestore(&devtree_lock, flags);
+ }
+ 
+ /*
+@@ -1260,8 +1350,9 @@ void of_attach_node(struct device_node *
+ void of_detach_node(struct device_node *np)
+ {
+ 	struct device_node *parent;
++	unsigned long flags;
+ 
+-	write_lock(&devtree_lock);
++	write_lock_irqsave(&devtree_lock, flags);
+ 
+ 	parent = np->parent;
+ 	if (!parent)
+@@ -1292,7 +1383,7 @@ void of_detach_node(struct device_node *
+ 	of_node_set_flag(np, OF_DETACHED);
+ 
+ out_unlock:
+-	write_unlock(&devtree_lock);
++	write_unlock_irqrestore(&devtree_lock, flags);
+ }
+ 
+ #ifdef CONFIG_PPC_PSERIES
+@@ -1373,20 +1464,21 @@ __initcall(prom_reconfig_setup);
+ int prom_add_property(struct device_node* np, struct property* prop)
+ {
+ 	struct property **next;
++	unsigned long flags;
+ 
+ 	prop->next = NULL;	
+-	write_lock(&devtree_lock);
++	write_lock_irqsave(&devtree_lock, flags);
+ 	next = &np->properties;
+ 	while (*next) {
+ 		if (strcmp(prop->name, (*next)->name) == 0) {
+ 			/* duplicate ! don't insert it */
+-			write_unlock(&devtree_lock);
++			write_unlock_irqrestore(&devtree_lock, flags);
+ 			return -1;
+ 		}
+ 		next = &(*next)->next;
+ 	}
+ 	*next = prop;
+-	write_unlock(&devtree_lock);
++	write_unlock_irqrestore(&devtree_lock, flags);
+ 
+ #ifdef CONFIG_PROC_DEVICETREE
+ 	/* try to add to proc as well if it was initialized */
+@@ -1406,9 +1498,10 @@ int prom_add_property(struct device_node
+ int prom_remove_property(struct device_node *np, struct property *prop)
+ {
+ 	struct property **next;
++	unsigned long flags;
+ 	int found = 0;
+ 
+-	write_lock(&devtree_lock);
++	write_lock_irqsave(&devtree_lock, flags);
+ 	next = &np->properties;
+ 	while (*next) {
+ 		if (*next == prop) {
+@@ -1421,7 +1514,7 @@ int prom_remove_property(struct device_n
+ 		}
+ 		next = &(*next)->next;
+ 	}
+-	write_unlock(&devtree_lock);
++	write_unlock_irqrestore(&devtree_lock, flags);
+ 
+ 	if (!found)
+ 		return -ENODEV;
+@@ -1447,9 +1540,10 @@ int prom_update_property(struct device_n
+ 			 struct property *oldprop)
+ {
+ 	struct property **next;
++	unsigned long flags;
+ 	int found = 0;
+ 
+-	write_lock(&devtree_lock);
++	write_lock_irqsave(&devtree_lock, flags);
+ 	next = &np->properties;
+ 	while (*next) {
+ 		if (*next == oldprop) {
+@@ -1463,7 +1557,7 @@ int prom_update_property(struct device_n
+ 		}
+ 		next = &(*next)->next;
+ 	}
+-	write_unlock(&devtree_lock);
++	write_unlock_irqrestore(&devtree_lock, flags);
+ 
+ 	if (!found)
+ 		return -ENODEV;
+--- a/arch/powerpc/kernel/prom_init.c
++++ b/arch/powerpc/kernel/prom_init.c
+@@ -2240,6 +2240,14 @@ static void __init fixup_device_tree_efi
+ 	if (rv != PROM_ERROR && (strcmp(prop, "chrp") == 0))
+ 		prom_setprop(node, "/", "device_type", "efika", sizeof("efika"));
+ 
++	/* CODEGEN,description is exposed in /proc/cpuinfo so
++	   fix that too */
++	rv = prom_getprop(node, "CODEGEN,description", prop, sizeof(prop));
++	if (rv != PROM_ERROR && (strstr(prop, "CHRP")))
++		prom_setprop(node, "/", "CODEGEN,description",
++			     "Efika 5200B PowerPC System",
++			     sizeof("Efika 5200B PowerPC System"));
++
+ 	/* Fixup bestcomm interrupts property */
+ 	node = call_prom("finddevice", 1, 1, ADDR("/builtin/bestcomm"));
+ 	if (PHANDLE_VALID(node)) {
+--- a/arch/powerpc/kernel/rtas.c
++++ b/arch/powerpc/kernel/rtas.c
+@@ -22,6 +22,7 @@
+ #include <linux/smp.h>
+ #include <linux/completion.h>
+ #include <linux/cpumask.h>
++#include <linux/lmb.h>
+ 
+ #include <asm/prom.h>
+ #include <asm/rtas.h>
+@@ -34,7 +35,6 @@
+ #include <asm/system.h>
+ #include <asm/delay.h>
+ #include <asm/uaccess.h>
+-#include <asm/lmb.h>
+ #include <asm/udbg.h>
+ #include <asm/syscalls.h>
+ #include <asm/smp.h>
+@@ -507,7 +507,7 @@ int rtas_error_rc(int rtas_rc)
+ 			break;
+ 		default:
+ 			printk(KERN_ERR "%s: unexpected RTAS error %d\n",
+-					__FUNCTION__, rtas_rc);
++					__func__, rtas_rc);
+ 			rc = -ERANGE;
+ 			break;
+ 	}
+--- a/arch/powerpc/kernel/rtas_flash.c
++++ b/arch/powerpc/kernel/rtas_flash.c
+@@ -807,7 +807,7 @@ int __init rtas_flash_init(void)
+ 				rtas_block_ctor);
+ 	if (!flash_block_cache) {
+ 		printk(KERN_ERR "%s: failed to create block cache\n",
+-				__FUNCTION__);
++				__func__);
+ 		rc = -ENOMEM;
+ 		goto cleanup;
+ 	}
+--- a/arch/powerpc/kernel/rtas_pci.c
++++ b/arch/powerpc/kernel/rtas_pci.c
+@@ -56,21 +56,6 @@ static inline int config_access_valid(st
+ 	return 0;
+ }
+ 
+-static int of_device_available(struct device_node * dn)
+-{
+-        const char *status;
+-
+-        status = of_get_property(dn, "status", NULL);
+-
+-        if (!status)
+-                return 1;
+-
+-        if (!strcmp(status, "okay"))
+-                return 1;
+-
+-        return 0;
+-}
+-
+ int rtas_read_config(struct pci_dn *pdn, int where, int size, u32 *val)
+ {
+ 	int returnval = -1;
+@@ -117,7 +102,7 @@ static int rtas_pci_read_config(struct p
+ 	for (dn = busdn->child; dn; dn = dn->sibling) {
+ 		struct pci_dn *pdn = PCI_DN(dn);
+ 		if (pdn && pdn->devfn == devfn
+-		    && of_device_available(dn))
++		    && of_device_is_available(dn))
+ 			return rtas_read_config(pdn, where, size, val);
+ 	}
+ 
+@@ -164,7 +149,7 @@ static int rtas_pci_write_config(struct 
+ 	for (dn = busdn->child; dn; dn = dn->sibling) {
+ 		struct pci_dn *pdn = PCI_DN(dn);
+ 		if (pdn && pdn->devfn == devfn
+-		    && of_device_available(dn))
++		    && of_device_is_available(dn))
+ 			return rtas_write_config(pdn, where, size, val);
+ 	}
+ 	return PCIBIOS_DEVICE_NOT_FOUND;
+@@ -326,7 +311,7 @@ int pcibios_remove_root_bus(struct pci_c
+ 
+ 	res = b->resource[0];
+ 	if (!res->flags) {
+-		printk(KERN_ERR "%s: no IO resource for PHB %s\n", __FUNCTION__,
++		printk(KERN_ERR "%s: no IO resource for PHB %s\n", __func__,
+ 				b->name);
+ 		return 1;
+ 	}
+@@ -334,13 +319,13 @@ int pcibios_remove_root_bus(struct pci_c
+ 	rc = pcibios_unmap_io_space(b);
+ 	if (rc) {
+ 		printk(KERN_ERR "%s: failed to unmap IO on bus %s\n",
+-			__FUNCTION__, b->name);
++			__func__, b->name);
+ 		return 1;
+ 	}
+ 
+ 	if (release_resource(res)) {
+ 		printk(KERN_ERR "%s: failed to release IO on bus %s\n",
+-				__FUNCTION__, b->name);
++				__func__, b->name);
+ 		return 1;
+ 	}
+ 
+@@ -348,13 +333,13 @@ int pcibios_remove_root_bus(struct pci_c
+ 		res = b->resource[i];
+ 		if (!res->flags && i == 0) {
+ 			printk(KERN_ERR "%s: no MEM resource for PHB %s\n",
+-				__FUNCTION__, b->name);
++				__func__, b->name);
+ 			return 1;
+ 		}
+ 		if (res->flags && release_resource(res)) {
+ 			printk(KERN_ERR
+ 			       "%s: failed to release IO %d on bus %s\n",
+-				__FUNCTION__, i, b->name);
++				__func__, i, b->name);
+ 			return 1;
+ 		}
+ 	}
+--- a/arch/powerpc/kernel/setup-common.c
++++ b/arch/powerpc/kernel/setup-common.c
+@@ -34,6 +34,7 @@
+ #include <linux/serial_8250.h>
+ #include <linux/debugfs.h>
+ #include <linux/percpu.h>
++#include <linux/lmb.h>
+ #include <asm/io.h>
+ #include <asm/prom.h>
+ #include <asm/processor.h>
+@@ -56,7 +57,6 @@
+ #include <asm/cache.h>
+ #include <asm/page.h>
+ #include <asm/mmu.h>
+-#include <asm/lmb.h>
+ #include <asm/xmon.h>
+ #include <asm/cputhreads.h>
+ 
+@@ -167,6 +167,8 @@ static int show_cpuinfo(struct seq_file 
+ 	unsigned short min;
+ 
+ 	if (cpu_id == NR_CPUS) {
++		struct device_node *root;
++		const char *model = NULL;
+ #if defined(CONFIG_SMP) && defined(CONFIG_PPC32)
+ 		unsigned long bogosum = 0;
+ 		int i;
+@@ -178,6 +180,13 @@ static int show_cpuinfo(struct seq_file 
+ 		seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq);
+ 		if (ppc_md.name)
+ 			seq_printf(m, "platform\t: %s\n", ppc_md.name);
++		root = of_find_node_by_path("/");
++		if (root)
++			model = of_get_property(root, "model", NULL);
++		if (model)
++			seq_printf(m, "model\t\t: %s\n", model);
++		of_node_put(root);
++
+ 		if (ppc_md.show_cpuinfo != NULL)
+ 			ppc_md.show_cpuinfo(m);
+ 
+--- a/arch/powerpc/kernel/setup_32.c
++++ b/arch/powerpc/kernel/setup_32.c
+@@ -172,6 +172,18 @@ int __init ppc_setup_l2cr(char *str)
+ }
+ __setup("l2cr=", ppc_setup_l2cr);
+ 
++/* Checks "l3cr=xxxx" command-line option */
++int __init ppc_setup_l3cr(char *str)
++{
++	if (cpu_has_feature(CPU_FTR_L3CR)) {
++		unsigned long val = simple_strtoul(str, NULL, 0);
++		printk(KERN_INFO "l3cr set to %lx\n", val);
++		_set_L3CR(val);		/* and enable it */
++	}
++	return 1;
++}
++__setup("l3cr=", ppc_setup_l3cr);
++
+ #ifdef CONFIG_GENERIC_NVRAM
+ 
+ /* Generic nvram hooks used by drivers/char/gen_nvram.c */
+@@ -277,7 +289,7 @@ void __init setup_arch(char **cmdline_p)
+ 	if (ppc_md.panic)
+ 		setup_panic();
+ 
+-	init_mm.start_code = PAGE_OFFSET;
++	init_mm.start_code = (unsigned long)_stext;
+ 	init_mm.end_code = (unsigned long) _etext;
+ 	init_mm.end_data = (unsigned long) _edata;
+ 	init_mm.brk = klimit;
+--- a/arch/powerpc/kernel/setup_64.c
++++ b/arch/powerpc/kernel/setup_64.c
+@@ -33,6 +33,8 @@
+ #include <linux/serial_8250.h>
+ #include <linux/bootmem.h>
+ #include <linux/pci.h>
++#include <linux/lockdep.h>
++#include <linux/lmb.h>
+ #include <asm/io.h>
+ #include <asm/kdump.h>
+ #include <asm/prom.h>
+@@ -55,7 +57,6 @@
+ #include <asm/cache.h>
+ #include <asm/page.h>
+ #include <asm/mmu.h>
+-#include <asm/lmb.h>
+ #include <asm/firmware.h>
+ #include <asm/xmon.h>
+ #include <asm/udbg.h>
+@@ -178,6 +179,9 @@ void __init early_setup(unsigned long dt
+ 	/* Enable early debugging if any specified (see udbg.h) */
+ 	udbg_early_init();
+ 
++	/* Initialize lockdep early or else spinlocks will blow */
++	lockdep_init();
++
+  	DBG(" -> early_setup(), dt_ptr: 0x%lx\n", dt_ptr);
+ 
+ 	/*
+@@ -510,7 +514,7 @@ void __init setup_arch(char **cmdline_p)
+ 	if (ppc_md.panic)
+ 		setup_panic();
+ 
+-	init_mm.start_code = PAGE_OFFSET;
++	init_mm.start_code = (unsigned long)_stext;
+ 	init_mm.end_code = (unsigned long) _etext;
+ 	init_mm.end_data = (unsigned long) _edata;
+ 	init_mm.brk = klimit;
+--- /dev/null
++++ b/arch/powerpc/kernel/stacktrace.c
+@@ -0,0 +1,47 @@
++/*
++ * Stack trace utility
++ *
++ * Copyright 2008 Christoph Hellwig, IBM Corp.
++ *
++ *
++ *      This program is free software; you can redistribute it and/or
++ *      modify it under the terms of the GNU General Public License
++ *      as published by the Free Software Foundation; either version
++ *      2 of the License, or (at your option) any later version.
++ */
++
++#include <linux/sched.h>
++#include <linux/stacktrace.h>
++#include <asm/ptrace.h>
++#include <asm/asm-offsets.h>
++
++/*
++ * Save stack-backtrace addresses into a stack_trace buffer.
++ */
++void save_stack_trace(struct stack_trace *trace)
++{
++	unsigned long sp;
++
++	asm("mr %0,1" : "=r" (sp));
++
++	for (;;) {
++		unsigned long *stack = (unsigned long *) sp;
++		unsigned long newsp, ip;
++
++		if (!validate_sp(sp, current, STACK_FRAME_OVERHEAD))
++			return;
++
++		newsp = stack[0];
++		ip = stack[STACK_FRAME_LR_SAVE];
++
++		if (!trace->skip)
++			trace->entries[trace->nr_entries++] = ip;
++		else
++			trace->skip--;
++
++		if (trace->nr_entries >= trace->max_entries)
++			return;
++
++		sp = newsp;
++	}
++}
+--- a/arch/powerpc/kernel/sys_ppc32.c
++++ b/arch/powerpc/kernel/sys_ppc32.c
+@@ -368,11 +368,6 @@ long compat_sys_execve(unsigned long a0,
+ 
+ 	error = compat_do_execve(filename, compat_ptr(a1), compat_ptr(a2), regs);
+ 
+-	if (error == 0) {
+-		task_lock(current);
+-		current->ptrace &= ~PT_DTRACE;
+-		task_unlock(current);
+-	}
+ 	putname(filename);
+ 
+ out:
+--- a/arch/powerpc/kernel/vdso.c
++++ b/arch/powerpc/kernel/vdso.c
+@@ -21,13 +21,14 @@
+ #include <linux/elf.h>
+ #include <linux/security.h>
+ #include <linux/bootmem.h>
++#include <linux/lmb.h>
+ 
+ #include <asm/pgtable.h>
+ #include <asm/system.h>
+ #include <asm/processor.h>
+ #include <asm/mmu.h>
+ #include <asm/mmu_context.h>
+-#include <asm/lmb.h>
++#include <asm/prom.h>
+ #include <asm/machdep.h>
+ #include <asm/cputable.h>
+ #include <asm/sections.h>
+--- a/arch/powerpc/kernel/vio.c
++++ b/arch/powerpc/kernel/vio.c
+@@ -139,7 +139,7 @@ static int vio_bus_remove(struct device 
+  */
+ int vio_register_driver(struct vio_driver *viodrv)
+ {
+-	printk(KERN_DEBUG "%s: driver %s registering\n", __FUNCTION__,
++	printk(KERN_DEBUG "%s: driver %s registering\n", __func__,
+ 		viodrv->driver.name);
+ 
+ 	/* fill in 'struct driver' fields */
+@@ -184,7 +184,7 @@ struct vio_dev *vio_register_device_node
+ 	/* we need the 'device_type' property, in order to match with drivers */
+ 	if (of_node->type == NULL) {
+ 		printk(KERN_WARNING "%s: node %s missing 'device_type'\n",
+-				__FUNCTION__,
++				__func__,
+ 				of_node->name ? of_node->name : "<unknown>");
+ 		return NULL;
+ 	}
+@@ -192,7 +192,7 @@ struct vio_dev *vio_register_device_node
+ 	unit_address = of_get_property(of_node, "reg", NULL);
+ 	if (unit_address == NULL) {
+ 		printk(KERN_WARNING "%s: node %s missing 'reg'\n",
+-				__FUNCTION__,
++				__func__,
+ 				of_node->name ? of_node->name : "<unknown>");
+ 		return NULL;
+ 	}
+@@ -227,7 +227,7 @@ struct vio_dev *vio_register_device_node
+ 	/* register with generic device framework */
+ 	if (device_register(&viodev->dev)) {
+ 		printk(KERN_ERR "%s: failed to register device %s\n",
+-				__FUNCTION__, viodev->dev.bus_id);
++				__func__, viodev->dev.bus_id);
+ 		/* XXX free TCE table */
+ 		kfree(viodev);
+ 		return NULL;
+@@ -258,7 +258,7 @@ static int __init vio_bus_init(void)
+ 	err = device_register(&vio_bus_device.dev);
+ 	if (err) {
+ 		printk(KERN_WARNING "%s: device_register returned %i\n",
+-				__FUNCTION__, err);
++				__func__, err);
+ 		return err;
+ 	}
+ 
+--- a/arch/powerpc/kernel/vmlinux.lds.S
++++ b/arch/powerpc/kernel/vmlinux.lds.S
+@@ -1,11 +1,9 @@
+ #ifdef CONFIG_PPC64
+-#include <asm/page.h>
+ #define PROVIDE32(x)	PROVIDE(__unused__##x)
+ #else
+-#define PAGE_SIZE	4096
+-#define KERNELBASE	CONFIG_KERNEL_START
+ #define PROVIDE32(x)	PROVIDE(x)
+ #endif
++#include <asm/page.h>
+ #include <asm-generic/vmlinux.lds.h>
+ #include <asm/cache.h>
+ 
+@@ -33,7 +31,7 @@ SECTIONS
+  */
+ 
+ 	/* Text and gots */
+-	.text : {
++	.text : AT(ADDR(.text) - LOAD_OFFSET) {
+ 		ALIGN_FUNCTION();
+ 		*(.text.head)
+ 		_text = .;
+@@ -58,7 +56,7 @@ SECTIONS
+ 	RODATA
+ 
+ 	/* Exception & bug tables */
+-	__ex_table : {
++	__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
+ 		__start___ex_table = .;
+ 		*(__ex_table)
+ 		__stop___ex_table = .;
+@@ -74,7 +72,7 @@ SECTIONS
+ 	. = ALIGN(PAGE_SIZE);
+ 	__init_begin = .;
+ 
+-	.init.text : {
++	.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
+ 		_sinittext = .;
+ 		INIT_TEXT
+ 		_einittext = .;
+@@ -83,11 +81,11 @@ SECTIONS
+ 	/* .exit.text is discarded at runtime, not link time,
+ 	 * to deal with references from __bug_table
+ 	 */
+-	.exit.text : {
++	.exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
+ 		EXIT_TEXT
+ 	}
+ 
+-	.init.data : {
++	.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
+ 		INIT_DATA
+ 		__vtop_table_begin = .;
+ 		*(.vtop_fixup);
+@@ -103,19 +101,19 @@ SECTIONS
+ 	}
+ 
+ 	. = ALIGN(16);
+-	.init.setup : {
++	.init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
+ 		__setup_start = .;
+ 		*(.init.setup)
+ 		__setup_end = .;
+ 	}
+ 
+-	.initcall.init : {
++	.initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
+ 		__initcall_start = .;
+ 		INITCALLS
+ 		__initcall_end = .;
+ 		}
+ 
+-	.con_initcall.init : {
++	.con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
+ 		__con_initcall_start = .;
+ 		*(.con_initcall.init)
+ 		__con_initcall_end = .;
+@@ -124,14 +122,14 @@ SECTIONS
+ 	SECURITY_INIT
+ 
+ 	. = ALIGN(8);
+-	__ftr_fixup : {
++	__ftr_fixup : AT(ADDR(__ftr_fixup) - LOAD_OFFSET) {
+ 		__start___ftr_fixup = .;
+ 		*(__ftr_fixup)
+ 		__stop___ftr_fixup = .;
+ 	}
+ #ifdef CONFIG_PPC64
+ 	. = ALIGN(8);
+-	__fw_ftr_fixup : {
++	__fw_ftr_fixup : AT(ADDR(__fw_ftr_fixup) - LOAD_OFFSET) {
+ 		__start___fw_ftr_fixup = .;
+ 		*(__fw_ftr_fixup)
+ 		__stop___fw_ftr_fixup = .;
+@@ -139,14 +137,14 @@ SECTIONS
+ #endif
+ #ifdef CONFIG_BLK_DEV_INITRD
+ 	. = ALIGN(PAGE_SIZE);
+-	.init.ramfs : {
++	.init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
+ 		__initramfs_start = .;
+ 		*(.init.ramfs)
+ 		__initramfs_end = .;
+ 	}
+ #endif
+ 	. = ALIGN(PAGE_SIZE);
+-	.data.percpu : {
++	.data.percpu  : AT(ADDR(.data.percpu) - LOAD_OFFSET) {
+ 		__per_cpu_start = .;
+ 		*(.data.percpu)
+ 		*(.data.percpu.shared_aligned)
+@@ -154,7 +152,7 @@ SECTIONS
+ 	}
+ 
+ 	. = ALIGN(8);
+-	.machine.desc : {
++	.machine.desc : AT(ADDR(.machine.desc) - LOAD_OFFSET) {
+ 		__machine_desc_start = . ;
+ 		*(.machine.desc)
+ 		__machine_desc_end = . ;
+@@ -172,25 +170,24 @@ SECTIONS
+ 	_sdata = .;
+ 
+ #ifdef CONFIG_PPC32
+-	.data    :
+-	{
++	.data : AT(ADDR(.data) - LOAD_OFFSET) {
+ 		DATA_DATA
+ 		*(.sdata)
+ 		*(.got.plt) *(.got)
+ 	}
+ #else
+-	.data : {
++	.data : AT(ADDR(.data) - LOAD_OFFSET) {
+ 		DATA_DATA
+ 		*(.data.rel*)
+ 		*(.toc1)
+ 		*(.branch_lt)
+ 	}
+ 
+-	.opd : {
++	.opd : AT(ADDR(.opd) - LOAD_OFFSET) {
+ 		*(.opd)
+ 	}
+ 
+-	.got : {
++	.got : AT(ADDR(.got) - LOAD_OFFSET) {
+ 		__toc_start = .;
+ 		*(.got)
+ 		*(.toc)
+@@ -207,26 +204,26 @@ SECTIONS
+ #else
+ 	. = ALIGN(16384);
+ #endif
+-	.data.init_task : {
++	.data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
+ 		*(.data.init_task)
+ 	}
+ 
+ 	. = ALIGN(PAGE_SIZE);
+-	.data.page_aligned : {
++	.data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
+ 		*(.data.page_aligned)
+ 	}
+ 
+-	.data.cacheline_aligned : {
++	.data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
+ 		*(.data.cacheline_aligned)
+ 	}
+ 
+ 	. = ALIGN(L1_CACHE_BYTES);
+-	.data.read_mostly : {
++	.data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
+ 		*(.data.read_mostly)
+ 	}
+ 
+ 	. = ALIGN(PAGE_SIZE);
+-	__data_nosave : {
++	.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
+ 		__nosave_begin = .;
+ 		*(.data.nosave)
+ 		. = ALIGN(PAGE_SIZE);
+@@ -237,7 +234,7 @@ SECTIONS
+  * And finally the bss
+  */
+ 
+-	.bss : {
++	.bss : AT(ADDR(.bss) - LOAD_OFFSET) {
+ 		__bss_start = .;
+ 		*(.sbss) *(.scommon)
+ 		*(.dynbss)
+--- a/arch/powerpc/lib/rheap.c
++++ b/arch/powerpc/lib/rheap.c
+@@ -54,7 +54,7 @@ static int grow(rh_info_t * info, int ma
+ 
+ 	new_blocks = max_blocks - info->max_blocks;
+ 
+-	block = kmalloc(sizeof(rh_block_t) * max_blocks, GFP_KERNEL);
++	block = kmalloc(sizeof(rh_block_t) * max_blocks, GFP_ATOMIC);
+ 	if (block == NULL)
+ 		return -ENOMEM;
+ 
+@@ -258,7 +258,7 @@ rh_info_t *rh_create(unsigned int alignm
+ 	if ((alignment & (alignment - 1)) != 0)
+ 		return ERR_PTR(-EINVAL);
+ 
+-	info = kmalloc(sizeof(*info), GFP_KERNEL);
++	info = kmalloc(sizeof(*info), GFP_ATOMIC);
+ 	if (info == NULL)
+ 		return ERR_PTR(-ENOMEM);
+ 
+--- a/arch/powerpc/lib/string.S
++++ b/arch/powerpc/lib/string.S
+@@ -75,6 +75,20 @@ _GLOBAL(strcmp)
+ 	beq	1b
+ 	blr
+ 
++_GLOBAL(strncmp)
++	PPC_LCMPI r5,0
++	beqlr
++	mtctr	r5
++	addi	r5,r3,-1
++	addi	r4,r4,-1
++1:	lbzu	r3,1(r5)
++	cmpwi	1,r3,0
++	lbzu	r0,1(r4)
++	subf.	r3,r0,r3
++	beqlr	1
++	bdnzt	eq,1b
++	blr
++
+ _GLOBAL(strlen)
+ 	addi	r4,r3,-1
+ 1:	lbzu	r0,1(r4)
+--- a/arch/powerpc/math-emu/fabs.c
++++ b/arch/powerpc/math-emu/fabs.c
+@@ -9,7 +9,7 @@ fabs(u32 *frD, u32 *frB)
+ 	frD[1] = frB[1];
+ 
+ #ifdef DEBUG
+-	printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
++	printk("%s: D %p, B %p: ", __func__, frD, frB);
+ 	dump_double(frD);
+ 	printk("\n");
+ #endif
+--- a/arch/powerpc/math-emu/fadd.c
++++ b/arch/powerpc/math-emu/fadd.c
+@@ -14,7 +14,7 @@ fadd(void *frD, void *frA, void *frB)
+ 	int ret = 0;
+ 
+ #ifdef DEBUG
+-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
++	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
+ #endif
+ 
+ 	__FP_UNPACK_D(A, frA);
+--- a/arch/powerpc/math-emu/fadds.c
++++ b/arch/powerpc/math-emu/fadds.c
+@@ -15,7 +15,7 @@ fadds(void *frD, void *frA, void *frB)
+ 	int ret = 0;
+ 
+ #ifdef DEBUG
+-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
++	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
+ #endif
+ 
+ 	__FP_UNPACK_D(A, frA);
+--- a/arch/powerpc/math-emu/fcmpo.c
++++ b/arch/powerpc/math-emu/fcmpo.c
+@@ -15,7 +15,7 @@ fcmpo(u32 *ccr, int crfD, void *frA, voi
+ 	int ret = 0;
+ 
+ #ifdef DEBUG
+-	printk("%s: %p (%08x) %d %p %p\n", __FUNCTION__, ccr, *ccr, crfD, frA, frB);
++	printk("%s: %p (%08x) %d %p %p\n", __func__, ccr, *ccr, crfD, frA, frB);
+ #endif
+ 
+ 	__FP_UNPACK_D(A, frA);
+--- a/arch/powerpc/math-emu/fcmpu.c
++++ b/arch/powerpc/math-emu/fcmpu.c
+@@ -14,7 +14,7 @@ fcmpu(u32 *ccr, int crfD, void *frA, voi
+ 	long cmp;
+ 
+ #ifdef DEBUG
+-	printk("%s: %p (%08x) %d %p %p\n", __FUNCTION__, ccr, *ccr, crfD, frA, frB);
++	printk("%s: %p (%08x) %d %p %p\n", __func__, ccr, *ccr, crfD, frA, frB);
+ #endif
+ 
+ 	__FP_UNPACK_D(A, frA);
+--- a/arch/powerpc/math-emu/fctiw.c
++++ b/arch/powerpc/math-emu/fctiw.c
+@@ -16,7 +16,7 @@ fctiw(u32 *frD, void *frB)
+ 	frD[1] = r;
+ 
+ #ifdef DEBUG
+-	printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
++	printk("%s: D %p, B %p: ", __func__, frD, frB);
+ 	dump_double(frD);
+ 	printk("\n");
+ #endif
+--- a/arch/powerpc/math-emu/fctiwz.c
++++ b/arch/powerpc/math-emu/fctiwz.c
+@@ -23,7 +23,7 @@ fctiwz(u32 *frD, void *frB)
+ 	__FPU_FPSCR = fpscr;
+ 
+ #ifdef DEBUG
+-	printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
++	printk("%s: D %p, B %p: ", __func__, frD, frB);
+ 	dump_double(frD);
+ 	printk("\n");
+ #endif
+--- a/arch/powerpc/math-emu/fdiv.c
++++ b/arch/powerpc/math-emu/fdiv.c
+@@ -14,7 +14,7 @@ fdiv(void *frD, void *frA, void *frB)
+ 	int ret = 0;
+ 
+ #ifdef DEBUG
+-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
++	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
+ #endif
+ 
+ 	__FP_UNPACK_D(A, frA);
+@@ -28,13 +28,13 @@ fdiv(void *frD, void *frA, void *frB)
+ 	if (A_c == FP_CLS_ZERO && B_c == FP_CLS_ZERO) {
+ 		ret |= EFLAG_VXZDZ;
+ #ifdef DEBUG
+-		printk("%s: FPSCR_VXZDZ raised\n", __FUNCTION__);
++		printk("%s: FPSCR_VXZDZ raised\n", __func__);
+ #endif
+ 	}
+ 	if (A_c == FP_CLS_INF && B_c == FP_CLS_INF) {
+ 		ret |= EFLAG_VXIDI;
+ #ifdef DEBUG
+-		printk("%s: FPSCR_VXIDI raised\n", __FUNCTION__);
++		printk("%s: FPSCR_VXIDI raised\n", __func__);
+ #endif
+ 	}
+ 
+--- a/arch/powerpc/math-emu/fdivs.c
++++ b/arch/powerpc/math-emu/fdivs.c
+@@ -15,7 +15,7 @@ fdivs(void *frD, void *frA, void *frB)
+ 	int ret = 0;
+ 
+ #ifdef DEBUG
+-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
++	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
+ #endif
+ 
+ 	__FP_UNPACK_D(A, frA);
+@@ -29,13 +29,13 @@ fdivs(void *frD, void *frA, void *frB)
+ 	if (A_c == FP_CLS_ZERO && B_c == FP_CLS_ZERO) {
+ 		ret |= EFLAG_VXZDZ;
+ #ifdef DEBUG
+-		printk("%s: FPSCR_VXZDZ raised\n", __FUNCTION__);
++		printk("%s: FPSCR_VXZDZ raised\n", __func__);
+ #endif
+ 	}
+ 	if (A_c == FP_CLS_INF && B_c == FP_CLS_INF) {
+ 		ret |= EFLAG_VXIDI;
+ #ifdef DEBUG
+-		printk("%s: FPSCR_VXIDI raised\n", __FUNCTION__);
++		printk("%s: FPSCR_VXIDI raised\n", __func__);
+ #endif
+ 	}
+ 
+--- a/arch/powerpc/math-emu/fmadd.c
++++ b/arch/powerpc/math-emu/fmadd.c
+@@ -16,7 +16,7 @@ fmadd(void *frD, void *frA, void *frB, v
+ 	int ret = 0;
+ 
+ #ifdef DEBUG
+-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
++	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
+ #endif
+ 
+ 	__FP_UNPACK_D(A, frA);
+--- a/arch/powerpc/math-emu/fmadds.c
++++ b/arch/powerpc/math-emu/fmadds.c
+@@ -17,7 +17,7 @@ fmadds(void *frD, void *frA, void *frB, 
+ 	int ret = 0;
+ 
+ #ifdef DEBUG
+-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
++	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
+ #endif
+ 
+ 	__FP_UNPACK_D(A, frA);
+--- a/arch/powerpc/math-emu/fmr.c
++++ b/arch/powerpc/math-emu/fmr.c
+@@ -9,7 +9,7 @@ fmr(u32 *frD, u32 *frB)
+ 	frD[1] = frB[1];
+ 
+ #ifdef DEBUG
+-	printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
++	printk("%s: D %p, B %p: ", __func__, frD, frB);
+ 	dump_double(frD);
+ 	printk("\n");
+ #endif
+--- a/arch/powerpc/math-emu/fmsub.c
++++ b/arch/powerpc/math-emu/fmsub.c
+@@ -16,7 +16,7 @@ fmsub(void *frD, void *frA, void *frB, v
+ 	int ret = 0;
+ 
+ #ifdef DEBUG
+-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
++	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
+ #endif
+ 
+ 	__FP_UNPACK_D(A, frA);
+--- a/arch/powerpc/math-emu/fmsubs.c
++++ b/arch/powerpc/math-emu/fmsubs.c
+@@ -17,7 +17,7 @@ fmsubs(void *frD, void *frA, void *frB, 
+ 	int ret = 0;
+ 
+ #ifdef DEBUG
+-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
++	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
+ #endif
+ 
+ 	__FP_UNPACK_D(A, frA);
+--- a/arch/powerpc/math-emu/fmul.c
++++ b/arch/powerpc/math-emu/fmul.c
+@@ -14,7 +14,7 @@ fmul(void *frD, void *frA, void *frB)
+ 	int ret = 0;
+ 
+ #ifdef DEBUG
+-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
++	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
+ #endif
+ 
+ 	__FP_UNPACK_D(A, frA);
+--- a/arch/powerpc/math-emu/fmuls.c
++++ b/arch/powerpc/math-emu/fmuls.c
+@@ -15,7 +15,7 @@ fmuls(void *frD, void *frA, void *frB)
+ 	int ret = 0;
+ 
+ #ifdef DEBUG
+-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
++	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
+ #endif
+ 
+ 	__FP_UNPACK_D(A, frA);
+--- a/arch/powerpc/math-emu/fnabs.c
++++ b/arch/powerpc/math-emu/fnabs.c
+@@ -9,7 +9,7 @@ fnabs(u32 *frD, u32 *frB)
+ 	frD[1] = frB[1];
+ 
+ #ifdef DEBUG
+-	printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
++	printk("%s: D %p, B %p: ", __func__, frD, frB);
+ 	dump_double(frD);
+ 	printk("\n");
+ #endif
+--- a/arch/powerpc/math-emu/fneg.c
++++ b/arch/powerpc/math-emu/fneg.c
+@@ -9,7 +9,7 @@ fneg(u32 *frD, u32 *frB)
+ 	frD[1] = frB[1];
+ 
+ #ifdef DEBUG
+-	printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
++	printk("%s: D %p, B %p: ", __func__, frD, frB);
+ 	dump_double(frD);
+ 	printk("\n");
+ #endif
+--- a/arch/powerpc/math-emu/fnmadd.c
++++ b/arch/powerpc/math-emu/fnmadd.c
+@@ -16,7 +16,7 @@ fnmadd(void *frD, void *frA, void *frB, 
+ 	int ret = 0;
+ 
+ #ifdef DEBUG
+-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
++	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
+ #endif
+ 
+ 	__FP_UNPACK_D(A, frA);
+--- a/arch/powerpc/math-emu/fnmadds.c
++++ b/arch/powerpc/math-emu/fnmadds.c
+@@ -17,7 +17,7 @@ fnmadds(void *frD, void *frA, void *frB,
+ 	int ret = 0;
+ 
+ #ifdef DEBUG
+-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
++	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
+ #endif
+ 
+ 	__FP_UNPACK_D(A, frA);
+--- a/arch/powerpc/math-emu/fnmsub.c
++++ b/arch/powerpc/math-emu/fnmsub.c
+@@ -16,7 +16,7 @@ fnmsub(void *frD, void *frA, void *frB, 
+ 	int ret = 0;
+ 
+ #ifdef DEBUG
+-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
++	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
+ #endif
+ 
+ 	__FP_UNPACK_D(A, frA);
+--- a/arch/powerpc/math-emu/fnmsubs.c
++++ b/arch/powerpc/math-emu/fnmsubs.c
+@@ -17,7 +17,7 @@ fnmsubs(void *frD, void *frA, void *frB,
+ 	int ret = 0;
+ 
+ #ifdef DEBUG
+-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
++	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
+ #endif
+ 
+ 	__FP_UNPACK_D(A, frA);
+--- a/arch/powerpc/math-emu/fres.c
++++ b/arch/powerpc/math-emu/fres.c
+@@ -6,7 +6,7 @@ int
+ fres(void *frD, void *frB)
+ {
+ #ifdef DEBUG
+-	printk("%s: %p %p\n", __FUNCTION__, frD, frB);
++	printk("%s: %p %p\n", __func__, frD, frB);
+ #endif
+ 	return -ENOSYS;
+ }
+--- a/arch/powerpc/math-emu/frsp.c
++++ b/arch/powerpc/math-emu/frsp.c
+@@ -12,7 +12,7 @@ frsp(void *frD, void *frB)
+ 	FP_DECL_D(B);
+ 
+ #ifdef DEBUG
+-	printk("%s: D %p, B %p\n", __FUNCTION__, frD, frB);
++	printk("%s: D %p, B %p\n", __func__, frD, frB);
+ #endif
+ 
+ 	__FP_UNPACK_D(B, frB);
+--- a/arch/powerpc/math-emu/frsqrte.c
++++ b/arch/powerpc/math-emu/frsqrte.c
+@@ -6,7 +6,7 @@ int
+ frsqrte(void *frD, void *frB)
+ {
+ #ifdef DEBUG
+-	printk("%s: %p %p\n", __FUNCTION__, frD, frB);
++	printk("%s: %p %p\n", __func__, frD, frB);
+ #endif
+ 	return 0;
+ }
+--- a/arch/powerpc/math-emu/fsel.c
++++ b/arch/powerpc/math-emu/fsel.c
+@@ -11,7 +11,7 @@ fsel(u32 *frD, void *frA, u32 *frB, u32 
+ 	FP_DECL_D(A);
+ 
+ #ifdef DEBUG
+-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
++	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
+ #endif
+ 
+ 	__FP_UNPACK_D(A, frA);
+--- a/arch/powerpc/math-emu/fsqrt.c
++++ b/arch/powerpc/math-emu/fsqrt.c
+@@ -13,7 +13,7 @@ fsqrt(void *frD, void *frB)
+ 	int ret = 0;
+ 
+ #ifdef DEBUG
+-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frB);
++	printk("%s: %p %p %p %p\n", __func__, frD, frB);
+ #endif
+ 
+ 	__FP_UNPACK_D(B, frB);
+--- a/arch/powerpc/math-emu/fsqrts.c
++++ b/arch/powerpc/math-emu/fsqrts.c
+@@ -14,7 +14,7 @@ fsqrts(void *frD, void *frB)
+ 	int ret = 0;
+ 
+ #ifdef DEBUG
+-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frB);
++	printk("%s: %p %p %p %p\n", __func__, frD, frB);
+ #endif
+ 
+ 	__FP_UNPACK_D(B, frB);
+--- a/arch/powerpc/math-emu/fsub.c
++++ b/arch/powerpc/math-emu/fsub.c
+@@ -14,7 +14,7 @@ fsub(void *frD, void *frA, void *frB)
+ 	int ret = 0;
+ 
+ #ifdef DEBUG
+-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
++	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
+ #endif
+ 
+ 	__FP_UNPACK_D(A, frA);
+--- a/arch/powerpc/math-emu/fsubs.c
++++ b/arch/powerpc/math-emu/fsubs.c
+@@ -15,7 +15,7 @@ fsubs(void *frD, void *frA, void *frB)
+ 	int ret = 0;
+ 
+ #ifdef DEBUG
+-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
++	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
+ #endif
+ 
+ 	__FP_UNPACK_D(A, frA);
+--- a/arch/powerpc/math-emu/lfd.c
++++ b/arch/powerpc/math-emu/lfd.c
+@@ -11,7 +11,7 @@ lfd(void *frD, void *ea)
+ 	if (copy_from_user(frD, ea, sizeof(double)))
+ 		return -EFAULT;
+ #ifdef DEBUG
+-	printk("%s: D %p, ea %p: ", __FUNCTION__, frD, ea);
++	printk("%s: D %p, ea %p: ", __func__, frD, ea);
+ 	dump_double(frD);
+ 	printk("\n");
+ #endif
+--- a/arch/powerpc/math-emu/lfs.c
++++ b/arch/powerpc/math-emu/lfs.c
+@@ -14,7 +14,7 @@ lfs(void *frD, void *ea)
+ 	float f;
+ 
+ #ifdef DEBUG
+-	printk("%s: D %p, ea %p\n", __FUNCTION__, frD, ea);
++	printk("%s: D %p, ea %p\n", __func__, frD, ea);
+ #endif
+ 
+ 	if (copy_from_user(&f, ea, sizeof(float)))
+--- a/arch/powerpc/math-emu/mcrfs.c
++++ b/arch/powerpc/math-emu/mcrfs.c
+@@ -10,7 +10,7 @@ mcrfs(u32 *ccr, u32 crfD, u32 crfS)
+ 	u32 value, clear;
+ 
+ #ifdef DEBUG
+-	printk("%s: %p (%08x) %d %d\n", __FUNCTION__, ccr, *ccr, crfD, crfS);
++	printk("%s: %p (%08x) %d %d\n", __func__, ccr, *ccr, crfD, crfS);
+ #endif
+ 
+ 	clear = 15 << ((7 - crfS) << 2);
+@@ -24,7 +24,7 @@ mcrfs(u32 *ccr, u32 crfD, u32 crfS)
+ 	*ccr |= (value << ((7 - crfD) << 2));
+ 
+ #ifdef DEBUG
+-	printk("CR: %08x\n", __FUNCTION__, *ccr);
++	printk("CR: %08x\n", __func__, *ccr);
+ #endif
+ 
+ 	return 0;
+--- a/arch/powerpc/math-emu/mffs.c
++++ b/arch/powerpc/math-emu/mffs.c
+@@ -10,7 +10,7 @@ mffs(u32 *frD)
+ 	frD[1] = __FPU_FPSCR;
+ 
+ #ifdef DEBUG
+-	printk("%s: frD %p: %08x.%08x\n", __FUNCTION__, frD, frD[0], frD[1]);
++	printk("%s: frD %p: %08x.%08x\n", __func__, frD, frD[0], frD[1]);
+ #endif
+ 
+ 	return 0;
+--- a/arch/powerpc/math-emu/mtfsb0.c
++++ b/arch/powerpc/math-emu/mtfsb0.c
+@@ -11,7 +11,7 @@ mtfsb0(int crbD)
+ 		__FPU_FPSCR &= ~(1 << (31 - crbD));
+ 
+ #ifdef DEBUG
+-	printk("%s: %d %08lx\n", __FUNCTION__, crbD, __FPU_FPSCR);
++	printk("%s: %d %08lx\n", __func__, crbD, __FPU_FPSCR);
+ #endif
+ 
+ 	return 0;
+--- a/arch/powerpc/math-emu/mtfsb1.c
++++ b/arch/powerpc/math-emu/mtfsb1.c
+@@ -11,7 +11,7 @@ mtfsb1(int crbD)
+ 		__FPU_FPSCR |= (1 << (31 - crbD));
+ 
+ #ifdef DEBUG
+-	printk("%s: %d %08lx\n", __FUNCTION__, crbD, __FPU_FPSCR);
++	printk("%s: %d %08lx\n", __func__, crbD, __FPU_FPSCR);
+ #endif
+ 
+ 	return 0;
+--- a/arch/powerpc/math-emu/mtfsf.c
++++ b/arch/powerpc/math-emu/mtfsf.c
+@@ -38,7 +38,7 @@ mtfsf(unsigned int FM, u32 *frB)
+ 	__FPU_FPSCR |= (frB[1] & mask);
+ 
+ #ifdef DEBUG
+-	printk("%s: %02x %p: %08lx\n", __FUNCTION__, FM, frB, __FPU_FPSCR);
++	printk("%s: %02x %p: %08lx\n", __func__, FM, frB, __FPU_FPSCR);
+ #endif
+ 
+ 	return 0;
+--- a/arch/powerpc/math-emu/mtfsfi.c
++++ b/arch/powerpc/math-emu/mtfsfi.c
+@@ -16,7 +16,7 @@ mtfsfi(unsigned int crfD, unsigned int I
+ 	__FPU_FPSCR |= (IMM & 0xf) << ((7 - crfD) << 2);
+ 
+ #ifdef DEBUG
+-	printk("%s: %d %x: %08lx\n", __FUNCTION__, crfD, IMM, __FPU_FPSCR);
++	printk("%s: %d %x: %08lx\n", __func__, crfD, IMM, __FPU_FPSCR);
+ #endif
+ 
+ 	return 0;
+--- a/arch/powerpc/math-emu/stfd.c
++++ b/arch/powerpc/math-emu/stfd.c
+@@ -7,7 +7,7 @@ stfd(void *frS, void *ea)
+ {
+ #if 0
+ #ifdef DEBUG
+-	printk("%s: S %p, ea %p: ", __FUNCTION__, frS, ea);
++	printk("%s: S %p, ea %p: ", __func__, frS, ea);
+ 	dump_double(frS);
+ 	printk("\n");
+ #endif
+--- a/arch/powerpc/math-emu/stfiwx.c
++++ b/arch/powerpc/math-emu/stfiwx.c
+@@ -6,7 +6,7 @@ int
+ stfiwx(u32 *frS, void *ea)
+ {
+ #ifdef DEBUG
+-	printk("%s: %p %p\n", __FUNCTION__, frS, ea);
++	printk("%s: %p %p\n", __func__, frS, ea);
+ #endif
+ 
+ 	if (copy_to_user(ea, &frS[1], sizeof(frS[1])))
+--- a/arch/powerpc/math-emu/stfs.c
++++ b/arch/powerpc/math-emu/stfs.c
+@@ -15,7 +15,7 @@ stfs(void *frS, void *ea)
+ 	int err;
+ 
+ #ifdef DEBUG
+-	printk("%s: S %p, ea %p\n", __FUNCTION__, frS, ea);
++	printk("%s: S %p, ea %p\n", __func__, frS, ea);
+ #endif
+ 
+ 	__FP_UNPACK_D(A, frS);
+--- a/arch/powerpc/mm/40x_mmu.c
++++ b/arch/powerpc/mm/40x_mmu.c
+@@ -97,7 +97,7 @@ unsigned long __init mmu_mapin_ram(void)
+ 	phys_addr_t p;
+ 
+ 	v = KERNELBASE;
+-	p = PPC_MEMSTART;
++	p = 0;
+ 	s = total_lowmem;
+ 
+ 	if (__map_without_ltlbs)
+--- a/arch/powerpc/mm/44x_mmu.c
++++ b/arch/powerpc/mm/44x_mmu.c
+@@ -67,7 +67,7 @@ unsigned long __init mmu_mapin_ram(void)
+ 
+ 	/* Pin in enough TLBs to cover any lowmem not covered by the
+ 	 * initial 256M mapping established in head_44x.S */
+-	for (addr = PPC_PIN_SIZE; addr < total_lowmem;
++	for (addr = PPC_PIN_SIZE; addr < lowmem_end_addr;
+ 	     addr += PPC_PIN_SIZE)
+ 		ppc44x_pin_tlb(addr + PAGE_OFFSET, addr);
+ 
+--- a/arch/powerpc/mm/Makefile
++++ b/arch/powerpc/mm/Makefile
+@@ -6,7 +6,7 @@ ifeq ($(CONFIG_PPC64),y)
+ EXTRA_CFLAGS	+= -mno-minimal-toc
+ endif
+ 
+-obj-y				:= fault.o mem.o lmb.o \
++obj-y				:= fault.o mem.o \
+ 				   init_$(CONFIG_WORD_SIZE).o \
+ 				   pgtable_$(CONFIG_WORD_SIZE).o \
+ 				   mmu_context_$(CONFIG_WORD_SIZE).o
+--- a/arch/powerpc/mm/fsl_booke_mmu.c
++++ b/arch/powerpc/mm/fsl_booke_mmu.c
+@@ -49,18 +49,15 @@
+ #include <asm/mmu.h>
+ #include <asm/uaccess.h>
+ #include <asm/smp.h>
+-#include <asm/bootx.h>
+ #include <asm/machdep.h>
+ #include <asm/setup.h>
+ 
++#include "mmu_decl.h"
++
+ extern void loadcam_entry(unsigned int index);
+ unsigned int tlbcam_index;
+ unsigned int num_tlbcam_entries;
+ static unsigned long __cam0, __cam1, __cam2;
+-extern unsigned long total_lowmem;
+-extern unsigned long __max_low_memory;
+-extern unsigned long __initial_memory_limit;
+-#define MAX_LOW_MEM	CONFIG_LOWMEM_SIZE
+ 
+ #define NUM_TLBCAMS	(16)
+ 
+@@ -165,15 +162,15 @@ void invalidate_tlbcam_entry(int index)
+ void __init cam_mapin_ram(unsigned long cam0, unsigned long cam1,
+ 		unsigned long cam2)
+ {
+-	settlbcam(0, PAGE_OFFSET, PPC_MEMSTART, cam0, _PAGE_KERNEL, 0);
++	settlbcam(0, PAGE_OFFSET, memstart_addr, cam0, _PAGE_KERNEL, 0);
+ 	tlbcam_index++;
+ 	if (cam1) {
+ 		tlbcam_index++;
+-		settlbcam(1, PAGE_OFFSET+cam0, PPC_MEMSTART+cam0, cam1, _PAGE_KERNEL, 0);
++		settlbcam(1, PAGE_OFFSET+cam0, memstart_addr+cam0, cam1, _PAGE_KERNEL, 0);
+ 	}
+ 	if (cam2) {
+ 		tlbcam_index++;
+-		settlbcam(2, PAGE_OFFSET+cam0+cam1, PPC_MEMSTART+cam0+cam1, cam2, _PAGE_KERNEL, 0);
++		settlbcam(2, PAGE_OFFSET+cam0+cam1, memstart_addr+cam0+cam1, cam2, _PAGE_KERNEL, 0);
+ 	}
+ }
+ 
+@@ -196,35 +193,32 @@ unsigned long __init mmu_mapin_ram(void)
+ void __init
+ adjust_total_lowmem(void)
+ {
+-	unsigned long max_low_mem = MAX_LOW_MEM;
+-	unsigned long cam_max = 0x10000000;
+-	unsigned long ram;
+-
+-	/* adjust CAM size to max_low_mem */
+-	if (max_low_mem < cam_max)
+-		cam_max = max_low_mem;
+-
+-	/* adjust lowmem size to max_low_mem */
+-	if (max_low_mem < total_lowmem)
+-		ram = max_low_mem;
+-	else
+-		ram = total_lowmem;
++	phys_addr_t max_lowmem_size = __max_low_memory;
++	phys_addr_t cam_max_size = 0x10000000;
++	phys_addr_t ram;
++
++	/* adjust CAM size to max_lowmem_size */
++	if (max_lowmem_size < cam_max_size)
++		cam_max_size = max_lowmem_size;
++
++	/* adjust lowmem size to max_lowmem_size */
++	ram = min(max_lowmem_size, total_lowmem);
+ 
+ 	/* Calculate CAM values */
+ 	__cam0 = 1UL << 2 * (__ilog2(ram) / 2);
+-	if (__cam0 > cam_max)
+-		__cam0 = cam_max;
++	if (__cam0 > cam_max_size)
++		__cam0 = cam_max_size;
+ 	ram -= __cam0;
+ 	if (ram) {
+ 		__cam1 = 1UL << 2 * (__ilog2(ram) / 2);
+-		if (__cam1 > cam_max)
+-			__cam1 = cam_max;
++		if (__cam1 > cam_max_size)
++			__cam1 = cam_max_size;
+ 		ram -= __cam1;
+ 	}
+ 	if (ram) {
+ 		__cam2 = 1UL << 2 * (__ilog2(ram) / 2);
+-		if (__cam2 > cam_max)
+-			__cam2 = cam_max;
++		if (__cam2 > cam_max_size)
++			__cam2 = cam_max_size;
+ 		ram -= __cam2;
+ 	}
+ 
+@@ -232,6 +226,6 @@ adjust_total_lowmem(void)
+ 			" CAM2=%ldMb residual: %ldMb\n",
+ 			__cam0 >> 20, __cam1 >> 20, __cam2 >> 20,
+ 			(total_lowmem - __cam0 - __cam1 - __cam2) >> 20);
+-	__max_low_memory = max_low_mem = __cam0 + __cam1 + __cam2;
+-	__initial_memory_limit = __max_low_memory;
++	__max_low_memory = __cam0 + __cam1 + __cam2;
++	__initial_memory_limit_addr = memstart_addr + __max_low_memory;
+ }
+--- a/arch/powerpc/mm/hash_utils_64.c
++++ b/arch/powerpc/mm/hash_utils_64.c
+@@ -31,6 +31,7 @@
+ #include <linux/cache.h>
+ #include <linux/init.h>
+ #include <linux/signal.h>
++#include <linux/lmb.h>
+ 
+ #include <asm/processor.h>
+ #include <asm/pgtable.h>
+@@ -41,7 +42,7 @@
+ #include <asm/system.h>
+ #include <asm/uaccess.h>
+ #include <asm/machdep.h>
+-#include <asm/lmb.h>
++#include <asm/prom.h>
+ #include <asm/abs_addr.h>
+ #include <asm/tlbflush.h>
+ #include <asm/io.h>
+@@ -191,6 +192,29 @@ int htab_bolt_mapping(unsigned long vsta
+ 	return ret < 0 ? ret : 0;
+ }
+ 
++#ifdef CONFIG_MEMORY_HOTPLUG
++static int htab_remove_mapping(unsigned long vstart, unsigned long vend,
++		      int psize, int ssize)
++{
++	unsigned long vaddr;
++	unsigned int step, shift;
++
++	shift = mmu_psize_defs[psize].shift;
++	step = 1 << shift;
++
++	if (!ppc_md.hpte_removebolted) {
++		printk(KERN_WARNING "Platform doesn't implement "
++				"hpte_removebolted\n");
++		return -EINVAL;
++	}
++
++	for (vaddr = vstart; vaddr < vend; vaddr += step)
++		ppc_md.hpte_removebolted(vaddr, psize, ssize);
++
++	return 0;
++}
++#endif /* CONFIG_MEMORY_HOTPLUG */
++
+ static int __init htab_dt_scan_seg_sizes(unsigned long node,
+ 					 const char *uname, int depth,
+ 					 void *data)
+@@ -434,6 +458,12 @@ void create_section_mapping(unsigned lon
+ 			_PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX,
+ 			mmu_linear_psize, mmu_kernel_ssize));
+ }
++
++int remove_section_mapping(unsigned long start, unsigned long end)
++{
++	return htab_remove_mapping(start, end, mmu_linear_psize,
++			mmu_kernel_ssize);
++}
+ #endif /* CONFIG_MEMORY_HOTPLUG */
+ 
+ static inline void make_bl(unsigned int *insn_addr, void *func)
+--- a/arch/powerpc/mm/init_32.c
++++ b/arch/powerpc/mm/init_32.c
+@@ -30,6 +30,7 @@
+ #include <linux/highmem.h>
+ #include <linux/initrd.h>
+ #include <linux/pagemap.h>
++#include <linux/lmb.h>
+ 
+ #include <asm/pgalloc.h>
+ #include <asm/prom.h>
+@@ -41,7 +42,6 @@
+ #include <asm/machdep.h>
+ #include <asm/btext.h>
+ #include <asm/tlb.h>
+-#include <asm/lmb.h>
+ #include <asm/sections.h>
+ 
+ #include "mmu_decl.h"
+@@ -59,8 +59,8 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_ga
+ unsigned long total_memory;
+ unsigned long total_lowmem;
+ 
+-unsigned long ppc_memstart;
+-unsigned long ppc_memoffset = PAGE_OFFSET;
++phys_addr_t memstart_addr;
++phys_addr_t lowmem_end_addr;
+ 
+ int boot_mapsize;
+ #ifdef CONFIG_PPC_PMAC
+@@ -95,10 +95,10 @@ int __map_without_ltlbs;
+ unsigned long __max_low_memory = MAX_LOW_MEM;
+ 
+ /*
+- * limit of what is accessible with initial MMU setup -
++ * address of the limit of what is accessible with initial MMU setup -
+  * 256MB usually, but only 16MB on 601.
+  */
+-unsigned long __initial_memory_limit = 0x10000000;
++phys_addr_t __initial_memory_limit_addr = (phys_addr_t)0x10000000;
+ 
+ /*
+  * Check for command-line options that affect what MMU_init will do.
+@@ -131,10 +131,10 @@ void __init MMU_init(void)
+ 
+ 	/* 601 can only access 16MB at the moment */
+ 	if (PVR_VER(mfspr(SPRN_PVR)) == 1)
+-		__initial_memory_limit = 0x01000000;
++		__initial_memory_limit_addr = 0x01000000;
+ 	/* 8xx can only access 8MB at the moment */
+ 	if (PVR_VER(mfspr(SPRN_PVR)) == 0x50)
+-		__initial_memory_limit = 0x00800000;
++		__initial_memory_limit_addr = 0x00800000;
+ 
+ 	/* parse args from command line */
+ 	MMU_setup();
+@@ -145,8 +145,8 @@ void __init MMU_init(void)
+ 		printk(KERN_WARNING "Only using first contiguous memory region");
+ 	}
+ 
+-	total_memory = lmb_end_of_DRAM();
+-	total_lowmem = total_memory;
++	total_lowmem = total_memory = lmb_end_of_DRAM() - memstart_addr;
++	lowmem_end_addr = memstart_addr + total_lowmem;
+ 
+ #ifdef CONFIG_FSL_BOOKE
+ 	/* Freescale Book-E parts expect lowmem to be mapped by fixed TLB
+@@ -157,9 +157,10 @@ void __init MMU_init(void)
+ 
+ 	if (total_lowmem > __max_low_memory) {
+ 		total_lowmem = __max_low_memory;
++		lowmem_end_addr = memstart_addr + total_lowmem;
+ #ifndef CONFIG_HIGHMEM
+ 		total_memory = total_lowmem;
+-		lmb_enforce_memory_limit(total_lowmem);
++		lmb_enforce_memory_limit(lowmem_end_addr);
+ 		lmb_analyze();
+ #endif /* CONFIG_HIGHMEM */
+ 	}
+@@ -184,8 +185,6 @@ void __init MMU_init(void)
+ 	/* Map in I/O resources */
+ 	if (ppc_md.progress)
+ 		ppc_md.progress("MMU:setio", 0x302);
+-	if (ppc_md.setup_io_mappings)
+-		ppc_md.setup_io_mappings();
+ 
+ 	/* Initialize the context management stuff */
+ 	mmu_context_init();
+@@ -208,7 +207,7 @@ void __init *early_get_page(void)
+ 		p = alloc_bootmem_pages(PAGE_SIZE);
+ 	} else {
+ 		p = __va(lmb_alloc_base(PAGE_SIZE, PAGE_SIZE,
+-					__initial_memory_limit));
++					__initial_memory_limit_addr));
+ 	}
+ 	return p;
+ }
+@@ -276,7 +275,7 @@ static int __init setup_kcore(void)
+ 
+ 		kcore_mem = kmalloc(sizeof(struct kcore_list), GFP_ATOMIC);
+ 		if (!kcore_mem)
+-			panic("%s: kmalloc failed\n", __FUNCTION__);
++			panic("%s: kmalloc failed\n", __func__);
+ 
+ 		/* must stay under 32 bits */
+ 		if ( 0xfffffffful - (unsigned long)__va(base) < size) {
+--- a/arch/powerpc/mm/init_64.c
++++ b/arch/powerpc/mm/init_64.c
+@@ -38,11 +38,11 @@
+ #include <linux/nodemask.h>
+ #include <linux/module.h>
+ #include <linux/poison.h>
++#include <linux/lmb.h>
+ 
+ #include <asm/pgalloc.h>
+ #include <asm/page.h>
+ #include <asm/prom.h>
+-#include <asm/lmb.h>
+ #include <asm/rtas.h>
+ #include <asm/io.h>
+ #include <asm/mmu_context.h>
+@@ -72,8 +72,7 @@
+ #warning TASK_SIZE is smaller than it needs to be.
+ #endif
+ 
+-/* max amount of RAM to use */
+-unsigned long __max_memory;
++phys_addr_t memstart_addr;
+ 
+ void free_initmem(void)
+ {
+@@ -122,7 +121,7 @@ static int __init setup_kcore(void)
+ 		/* GFP_ATOMIC to avoid might_sleep warnings during boot */
+ 		kcore_mem = kmalloc(sizeof(struct kcore_list), GFP_ATOMIC);
+ 		if (!kcore_mem)
+-			panic("%s: kmalloc failed\n", __FUNCTION__);
++			panic("%s: kmalloc failed\n", __func__);
+ 
+ 		kclist_add(kcore_mem, __va(base), size);
+ 	}
+--- a/arch/powerpc/mm/lmb.c
++++ /dev/null
+@@ -1,357 +0,0 @@
+-/*
+- * Procedures for maintaining information about logical memory blocks.
+- *
+- * Peter Bergner, IBM Corp.	June 2001.
+- * Copyright (C) 2001 Peter Bergner.
+- * 
+- *      This program is free software; you can redistribute it and/or
+- *      modify it under the terms of the GNU General Public License
+- *      as published by the Free Software Foundation; either version
+- *      2 of the License, or (at your option) any later version.
+- */
+-
+-#include <linux/kernel.h>
+-#include <linux/init.h>
+-#include <linux/bitops.h>
+-#include <asm/types.h>
+-#include <asm/page.h>
+-#include <asm/prom.h>
+-#include <asm/lmb.h>
+-#ifdef CONFIG_PPC32
+-#include "mmu_decl.h"		/* for __max_low_memory */
+-#endif
+-
+-#undef DEBUG
+-
+-#ifdef DEBUG
+-#include <asm/udbg.h>
+-#define DBG(fmt...) udbg_printf(fmt)
+-#else
+-#define DBG(fmt...)
+-#endif
+-
+-#define LMB_ALLOC_ANYWHERE	0
+-
+-struct lmb lmb;
+-
+-void lmb_dump_all(void)
+-{
+-#ifdef DEBUG
+-	unsigned long i;
+-
+-	DBG("lmb_dump_all:\n");
+-	DBG("    memory.cnt		  = 0x%lx\n", lmb.memory.cnt);
+-	DBG("    memory.size		  = 0x%lx\n", lmb.memory.size);
+-	for (i=0; i < lmb.memory.cnt ;i++) {
+-		DBG("    memory.region[0x%x].base       = 0x%lx\n",
+-			    i, lmb.memory.region[i].base);
+-		DBG("		      .size     = 0x%lx\n",
+-			    lmb.memory.region[i].size);
+-	}
+-
+-	DBG("\n    reserved.cnt	  = 0x%lx\n", lmb.reserved.cnt);
+-	DBG("    reserved.size	  = 0x%lx\n", lmb.reserved.size);
+-	for (i=0; i < lmb.reserved.cnt ;i++) {
+-		DBG("    reserved.region[0x%x].base       = 0x%lx\n",
+-			    i, lmb.reserved.region[i].base);
+-		DBG("		      .size     = 0x%lx\n",
+-			    lmb.reserved.region[i].size);
+-	}
+-#endif /* DEBUG */
+-}
+-
+-static unsigned long __init lmb_addrs_overlap(unsigned long base1,
+-		unsigned long size1, unsigned long base2, unsigned long size2)
+-{
+-	return ((base1 < (base2+size2)) && (base2 < (base1+size1)));
+-}
+-
+-static long __init lmb_addrs_adjacent(unsigned long base1, unsigned long size1,
+-		unsigned long base2, unsigned long size2)
+-{
+-	if (base2 == base1 + size1)
+-		return 1;
+-	else if (base1 == base2 + size2)
+-		return -1;
+-
+-	return 0;
+-}
+-
+-static long __init lmb_regions_adjacent(struct lmb_region *rgn,
+-		unsigned long r1, unsigned long r2)
+-{
+-	unsigned long base1 = rgn->region[r1].base;
+-	unsigned long size1 = rgn->region[r1].size;
+-	unsigned long base2 = rgn->region[r2].base;
+-	unsigned long size2 = rgn->region[r2].size;
+-
+-	return lmb_addrs_adjacent(base1, size1, base2, size2);
+-}
+-
+-static void __init lmb_remove_region(struct lmb_region *rgn, unsigned long r)
+-{
+-	unsigned long i;
+-
+-	for (i = r; i < rgn->cnt - 1; i++) {
+-		rgn->region[i].base = rgn->region[i + 1].base;
+-		rgn->region[i].size = rgn->region[i + 1].size;
+-	}
+-	rgn->cnt--;
+-}
+-
+-/* Assumption: base addr of region 1 < base addr of region 2 */
+-static void __init lmb_coalesce_regions(struct lmb_region *rgn,
+-		unsigned long r1, unsigned long r2)
+-{
+-	rgn->region[r1].size += rgn->region[r2].size;
+-	lmb_remove_region(rgn, r2);
+-}
+-
+-/* This routine called with relocation disabled. */
+-void __init lmb_init(void)
+-{
+-	/* Create a dummy zero size LMB which will get coalesced away later.
+-	 * This simplifies the lmb_add() code below...
+-	 */
+-	lmb.memory.region[0].base = 0;
+-	lmb.memory.region[0].size = 0;
+-	lmb.memory.cnt = 1;
+-
+-	/* Ditto. */
+-	lmb.reserved.region[0].base = 0;
+-	lmb.reserved.region[0].size = 0;
+-	lmb.reserved.cnt = 1;
+-}
+-
+-/* This routine may be called with relocation disabled. */
+-void __init lmb_analyze(void)
+-{
+-	int i;
+-
+-	lmb.memory.size = 0;
+-
+-	for (i = 0; i < lmb.memory.cnt; i++)
+-		lmb.memory.size += lmb.memory.region[i].size;
+-}
+-
+-/* This routine called with relocation disabled. */
+-static long __init lmb_add_region(struct lmb_region *rgn, unsigned long base,
+-				  unsigned long size)
+-{
+-	unsigned long coalesced = 0;
+-	long adjacent, i;
+-
+-	/* First try and coalesce this LMB with another. */
+-	for (i=0; i < rgn->cnt; i++) {
+-		unsigned long rgnbase = rgn->region[i].base;
+-		unsigned long rgnsize = rgn->region[i].size;
+-
+-		if ((rgnbase == base) && (rgnsize == size))
+-			/* Already have this region, so we're done */
+-			return 0;
+-
+-		adjacent = lmb_addrs_adjacent(base,size,rgnbase,rgnsize);
+-		if ( adjacent > 0 ) {
+-			rgn->region[i].base -= size;
+-			rgn->region[i].size += size;
+-			coalesced++;
+-			break;
+-		}
+-		else if ( adjacent < 0 ) {
+-			rgn->region[i].size += size;
+-			coalesced++;
+-			break;
+-		}
+-	}
+-
+-	if ((i < rgn->cnt-1) && lmb_regions_adjacent(rgn, i, i+1) ) {
+-		lmb_coalesce_regions(rgn, i, i+1);
+-		coalesced++;
+-	}
+-
+-	if (coalesced)
+-		return coalesced;
+-	if (rgn->cnt >= MAX_LMB_REGIONS)
+-		return -1;
+-
+-	/* Couldn't coalesce the LMB, so add it to the sorted table. */
+-	for (i = rgn->cnt-1; i >= 0; i--) {
+-		if (base < rgn->region[i].base) {
+-			rgn->region[i+1].base = rgn->region[i].base;
+-			rgn->region[i+1].size = rgn->region[i].size;
+-		} else {
+-			rgn->region[i+1].base = base;
+-			rgn->region[i+1].size = size;
+-			break;
+-		}
+-	}
+-	rgn->cnt++;
+-
+-	return 0;
+-}
+-
+-/* This routine may be called with relocation disabled. */
+-long __init lmb_add(unsigned long base, unsigned long size)
+-{
+-	struct lmb_region *_rgn = &(lmb.memory);
+-
+-	/* On pSeries LPAR systems, the first LMB is our RMO region. */
+-	if (base == 0)
+-		lmb.rmo_size = size;
+-
+-	return lmb_add_region(_rgn, base, size);
+-
+-}
+-
+-long __init lmb_reserve(unsigned long base, unsigned long size)
+-{
+-	struct lmb_region *_rgn = &(lmb.reserved);
+-
+-	BUG_ON(0 == size);
+-
+-	return lmb_add_region(_rgn, base, size);
+-}
+-
+-long __init lmb_overlaps_region(struct lmb_region *rgn, unsigned long base,
+-				unsigned long size)
+-{
+-	unsigned long i;
+-
+-	for (i=0; i < rgn->cnt; i++) {
+-		unsigned long rgnbase = rgn->region[i].base;
+-		unsigned long rgnsize = rgn->region[i].size;
+-		if ( lmb_addrs_overlap(base,size,rgnbase,rgnsize) ) {
+-			break;
+-		}
+-	}
+-
+-	return (i < rgn->cnt) ? i : -1;
+-}
+-
+-unsigned long __init lmb_alloc(unsigned long size, unsigned long align)
+-{
+-	return lmb_alloc_base(size, align, LMB_ALLOC_ANYWHERE);
+-}
+-
+-unsigned long __init lmb_alloc_base(unsigned long size, unsigned long align,
+-				    unsigned long max_addr)
+-{
+-	unsigned long alloc;
+-
+-	alloc = __lmb_alloc_base(size, align, max_addr);
+-
+-	if (alloc == 0)
+-		panic("ERROR: Failed to allocate 0x%lx bytes below 0x%lx.\n",
+-				size, max_addr);
+-
+-	return alloc;
+-}
+-
+-unsigned long __init __lmb_alloc_base(unsigned long size, unsigned long align,
+-				    unsigned long max_addr)
+-{
+-	long i, j;
+-	unsigned long base = 0;
+-
+-	BUG_ON(0 == size);
+-
+-#ifdef CONFIG_PPC32
+-	/* On 32-bit, make sure we allocate lowmem */
+-	if (max_addr == LMB_ALLOC_ANYWHERE)
+-		max_addr = __max_low_memory;
+-#endif
+-	for (i = lmb.memory.cnt-1; i >= 0; i--) {
+-		unsigned long lmbbase = lmb.memory.region[i].base;
+-		unsigned long lmbsize = lmb.memory.region[i].size;
+-
+-		if (max_addr == LMB_ALLOC_ANYWHERE)
+-			base = _ALIGN_DOWN(lmbbase + lmbsize - size, align);
+-		else if (lmbbase < max_addr) {
+-			base = min(lmbbase + lmbsize, max_addr);
+-			base = _ALIGN_DOWN(base - size, align);
+-		} else
+-			continue;
+-
+-		while ((lmbbase <= base) &&
+-		       ((j = lmb_overlaps_region(&lmb.reserved, base, size)) >= 0) )
+-			base = _ALIGN_DOWN(lmb.reserved.region[j].base - size,
+-					   align);
+-
+-		if ((base != 0) && (lmbbase <= base))
+-			break;
+-	}
+-
+-	if (i < 0)
+-		return 0;
+-
+-	lmb_add_region(&lmb.reserved, base, size);
+-
+-	return base;
+-}
+-
+-/* You must call lmb_analyze() before this. */
+-unsigned long __init lmb_phys_mem_size(void)
+-{
+-	return lmb.memory.size;
+-}
+-
+-unsigned long __init lmb_end_of_DRAM(void)
+-{
+-	int idx = lmb.memory.cnt - 1;
+-
+-	return (lmb.memory.region[idx].base + lmb.memory.region[idx].size);
+-}
+-
+-/* You must call lmb_analyze() after this. */
+-void __init lmb_enforce_memory_limit(unsigned long memory_limit)
+-{
+-	unsigned long i, limit;
+-	struct lmb_property *p;
+-
+-	if (! memory_limit)
+-		return;
+-
+-	/* Truncate the lmb regions to satisfy the memory limit. */
+-	limit = memory_limit;
+-	for (i = 0; i < lmb.memory.cnt; i++) {
+-		if (limit > lmb.memory.region[i].size) {
+-			limit -= lmb.memory.region[i].size;
+-			continue;
+-		}
+-
+-		lmb.memory.region[i].size = limit;
+-		lmb.memory.cnt = i + 1;
+-		break;
+-	}
+-
+-	if (lmb.memory.region[0].size < lmb.rmo_size)
+-		lmb.rmo_size = lmb.memory.region[0].size;
+-
+-	/* And truncate any reserves above the limit also. */
+-	for (i = 0; i < lmb.reserved.cnt; i++) {
+-		p = &lmb.reserved.region[i];
+-
+-		if (p->base > memory_limit)
+-			p->size = 0;
+-		else if ((p->base + p->size) > memory_limit)
+-			p->size = memory_limit - p->base;
+-
+-		if (p->size == 0) {
+-			lmb_remove_region(&lmb.reserved, i);
+-			i--;
+-		}
+-	}
+-}
+-
+-int __init lmb_is_reserved(unsigned long addr)
+-{
+-	int i;
+-
+-	for (i = 0; i < lmb.reserved.cnt; i++) {
+-		unsigned long upper = lmb.reserved.region[i].base +
+-				      lmb.reserved.region[i].size - 1;
+-		if ((addr >= lmb.reserved.region[i].base) && (addr <= upper))
+-			return 1;
+-	}
+-	return 0;
+-}
+--- a/arch/powerpc/mm/mem.c
++++ b/arch/powerpc/mm/mem.c
+@@ -31,6 +31,7 @@
+ #include <linux/initrd.h>
+ #include <linux/pagemap.h>
+ #include <linux/suspend.h>
++#include <linux/lmb.h>
+ 
+ #include <asm/pgalloc.h>
+ #include <asm/prom.h>
+@@ -42,7 +43,6 @@
+ #include <asm/machdep.h>
+ #include <asm/btext.h>
+ #include <asm/tlb.h>
+-#include <asm/lmb.h>
+ #include <asm/sections.h>
+ #include <asm/vdso.h>
+ 
+@@ -111,7 +111,7 @@ int memory_add_physaddr_to_nid(u64 start
+ }
+ #endif
+ 
+-int __devinit arch_add_memory(int nid, u64 start, u64 size)
++int arch_add_memory(int nid, u64 start, u64 size)
+ {
+ 	struct pglist_data *pgdata;
+ 	struct zone *zone;
+@@ -175,7 +175,6 @@ void show_mem(void)
+ 
+ 	printk("Mem-info:\n");
+ 	show_free_areas();
+-	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
+ 	for_each_online_pgdat(pgdat) {
+ 		unsigned long flags;
+ 		pgdat_resize_lock(pgdat, &flags);
+@@ -217,9 +216,11 @@ void __init do_init_bootmem(void)
+ 	unsigned long total_pages;
+ 	int boot_mapsize;
+ 
+-	max_pfn = total_pages = lmb_end_of_DRAM() >> PAGE_SHIFT;
++	max_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
++	total_pages = (lmb_end_of_DRAM() - memstart_addr) >> PAGE_SHIFT;
+ #ifdef CONFIG_HIGHMEM
+ 	total_pages = total_lowmem >> PAGE_SHIFT;
++	max_low_pfn = lowmem_end_addr >> PAGE_SHIFT;
+ #endif
+ 
+ 	/*
+@@ -245,18 +246,18 @@ void __init do_init_bootmem(void)
+ 	 * present.
+ 	 */
+ #ifdef CONFIG_HIGHMEM
+-	free_bootmem_with_active_regions(0, total_lowmem >> PAGE_SHIFT);
++	free_bootmem_with_active_regions(0, lowmem_end_addr >> PAGE_SHIFT);
+ 
+ 	/* reserve the sections we're already using */
+ 	for (i = 0; i < lmb.reserved.cnt; i++) {
+ 		unsigned long addr = lmb.reserved.region[i].base +
+ 				     lmb_size_bytes(&lmb.reserved, i) - 1;
+-		if (addr < total_lowmem)
++		if (addr < lowmem_end_addr)
+ 			reserve_bootmem(lmb.reserved.region[i].base,
+ 					lmb_size_bytes(&lmb.reserved, i),
+ 					BOOTMEM_DEFAULT);
+-		else if (lmb.reserved.region[i].base < total_lowmem) {
+-			unsigned long adjusted_size = total_lowmem -
++		else if (lmb.reserved.region[i].base < lowmem_end_addr) {
++			unsigned long adjusted_size = lowmem_end_addr -
+ 				      lmb.reserved.region[i].base;
+ 			reserve_bootmem(lmb.reserved.region[i].base,
+ 					adjusted_size, BOOTMEM_DEFAULT);
+@@ -326,7 +327,7 @@ void __init paging_init(void)
+ 	       (top_of_ram - total_ram) >> 20);
+ 	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
+ #ifdef CONFIG_HIGHMEM
+-	max_zone_pfns[ZONE_DMA] = total_lowmem >> PAGE_SHIFT;
++	max_zone_pfns[ZONE_DMA] = lowmem_end_addr >> PAGE_SHIFT;
+ 	max_zone_pfns[ZONE_HIGHMEM] = top_of_ram >> PAGE_SHIFT;
+ #else
+ 	max_zone_pfns[ZONE_DMA] = top_of_ram >> PAGE_SHIFT;
+@@ -381,7 +382,7 @@ void __init mem_init(void)
+ 	{
+ 		unsigned long pfn, highmem_mapnr;
+ 
+-		highmem_mapnr = total_lowmem >> PAGE_SHIFT;
++		highmem_mapnr = lowmem_end_addr >> PAGE_SHIFT;
+ 		for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) {
+ 			struct page *page = pfn_to_page(pfn);
+ 			if (lmb_is_reserved(pfn << PAGE_SHIFT))
+--- a/arch/powerpc/mm/mmu_decl.h
++++ b/arch/powerpc/mm/mmu_decl.h
+@@ -48,9 +48,11 @@ extern unsigned int num_tlbcam_entries;
+ 
+ extern unsigned long ioremap_bot;
+ extern unsigned long __max_low_memory;
+-extern unsigned long __initial_memory_limit;
++extern phys_addr_t __initial_memory_limit_addr;
+ extern unsigned long total_memory;
+ extern unsigned long total_lowmem;
++extern phys_addr_t memstart_addr;
++extern phys_addr_t lowmem_end_addr;
+ 
+ /* ...and now those things that may be slightly different between processor
+  * architectures.  -- Dan
+--- a/arch/powerpc/mm/numa.c
++++ b/arch/powerpc/mm/numa.c
+@@ -17,8 +17,9 @@
+ #include <linux/nodemask.h>
+ #include <linux/cpu.h>
+ #include <linux/notifier.h>
++#include <linux/lmb.h>
+ #include <asm/sparsemem.h>
+-#include <asm/lmb.h>
++#include <asm/prom.h>
+ #include <asm/system.h>
+ #include <asm/smp.h>
+ 
+--- a/arch/powerpc/mm/pgtable_32.c
++++ b/arch/powerpc/mm/pgtable_32.c
+@@ -281,12 +281,13 @@ int map_page(unsigned long va, phys_addr
+  */
+ void __init mapin_ram(void)
+ {
+-	unsigned long v, p, s, f;
++	unsigned long v, s, f;
++	phys_addr_t p;
+ 	int ktext;
+ 
+ 	s = mmu_mapin_ram();
+ 	v = KERNELBASE + s;
+-	p = PPC_MEMSTART + s;
++	p = memstart_addr + s;
+ 	for (; s < total_lowmem; s += PAGE_SIZE) {
+ 		ktext = ((char *) v >= _stext && (char *) v < etext);
+ 		f = ktext ?_PAGE_RAM_TEXT : _PAGE_RAM;
+--- a/arch/powerpc/mm/ppc_mmu_32.c
++++ b/arch/powerpc/mm/ppc_mmu_32.c
+@@ -26,11 +26,11 @@
+ #include <linux/mm.h>
+ #include <linux/init.h>
+ #include <linux/highmem.h>
++#include <linux/lmb.h>
+ 
+ #include <asm/prom.h>
+ #include <asm/mmu.h>
+ #include <asm/machdep.h>
+-#include <asm/lmb.h>
+ 
+ #include "mmu_decl.h"
+ 
+@@ -82,7 +82,6 @@ unsigned long __init mmu_mapin_ram(void)
+ #else
+ 	unsigned long tot, bl, done;
+ 	unsigned long max_size = (256<<20);
+-	unsigned long align;
+ 
+ 	if (__map_without_bats) {
+ 		printk(KERN_DEBUG "RAM mapped without BATs\n");
+@@ -93,19 +92,13 @@ unsigned long __init mmu_mapin_ram(void)
+ 
+ 	/* Make sure we don't map a block larger than the
+ 	   smallest alignment of the physical address. */
+-	/* alignment of PPC_MEMSTART */
+-	align = ~(PPC_MEMSTART-1) & PPC_MEMSTART;
+-	/* set BAT block size to MIN(max_size, align) */
+-	if (align && align < max_size)
+-		max_size = align;
+-
+ 	tot = total_lowmem;
+ 	for (bl = 128<<10; bl < max_size; bl <<= 1) {
+ 		if (bl * 2 > tot)
+ 			break;
+ 	}
+ 
+-	setbat(2, KERNELBASE, PPC_MEMSTART, bl, _PAGE_RAM);
++	setbat(2, KERNELBASE, 0, bl, _PAGE_RAM);
+ 	done = (unsigned long)bat_addrs[2].limit - KERNELBASE + 1;
+ 	if ((done < tot) && !bat_addrs[3].limit) {
+ 		/* use BAT3 to cover a bit more */
+@@ -113,7 +106,7 @@ unsigned long __init mmu_mapin_ram(void)
+ 		for (bl = 128<<10; bl < max_size; bl <<= 1)
+ 			if (bl * 2 > tot)
+ 				break;
+-		setbat(3, KERNELBASE+done, PPC_MEMSTART+done, bl, _PAGE_RAM);
++		setbat(3, KERNELBASE+done, done, bl, _PAGE_RAM);
+ 		done = (unsigned long)bat_addrs[3].limit - KERNELBASE + 1;
+ 	}
+ 
+@@ -240,7 +233,7 @@ void __init MMU_init_hw(void)
+ 	 */
+ 	if ( ppc_md.progress ) ppc_md.progress("hash:find piece", 0x322);
+ 	Hash = __va(lmb_alloc_base(Hash_size, Hash_size,
+-				   __initial_memory_limit));
++				   __initial_memory_limit_addr));
+ 	cacheable_memzero(Hash, Hash_size);
+ 	_SDR1 = __pa(Hash) | SDR1_LOW_BITS;
+ 
+--- a/arch/powerpc/mm/stab.c
++++ b/arch/powerpc/mm/stab.c
+@@ -12,12 +12,14 @@
+  *      2 of the License, or (at your option) any later version.
+  */
+ 
++#include <linux/lmb.h>
++
+ #include <asm/pgtable.h>
+ #include <asm/mmu.h>
+ #include <asm/mmu_context.h>
+ #include <asm/paca.h>
+ #include <asm/cputable.h>
+-#include <asm/lmb.h>
++#include <asm/prom.h>
+ #include <asm/abs_addr.h>
+ #include <asm/firmware.h>
+ #include <asm/iseries/hv_call.h>
+--- a/arch/powerpc/oprofile/cell/spu_task_sync.c
++++ b/arch/powerpc/oprofile/cell/spu_task_sync.c
+@@ -68,7 +68,7 @@ static struct cached_info *get_cached_in
+ 	if (spu_num >= num_spu_nodes) {
+ 		printk(KERN_ERR "SPU_PROF: "
+ 		       "%s, line %d: Invalid index %d into spu info cache\n",
+-		       __FUNCTION__, __LINE__, spu_num);
++		       __func__, __LINE__, spu_num);
+ 		ret_info = NULL;
+ 		goto out;
+ 	}
+@@ -115,7 +115,7 @@ prepare_cached_spu_info(struct spu *spu,
+ 	if (!info) {
+ 		printk(KERN_ERR "SPU_PROF: "
+ 		       "%s, line %d: create vma_map failed\n",
+-		       __FUNCTION__, __LINE__);
++		       __func__, __LINE__);
+ 		retval = -ENOMEM;
+ 		goto err_alloc;
+ 	}
+@@ -123,7 +123,7 @@ prepare_cached_spu_info(struct spu *spu,
+ 	if (!new_map) {
+ 		printk(KERN_ERR "SPU_PROF: "
+ 		       "%s, line %d: create vma_map failed\n",
+-		       __FUNCTION__, __LINE__);
++		       __func__, __LINE__);
+ 		retval = -ENOMEM;
+ 		goto err_alloc;
+ 	}
+@@ -171,7 +171,7 @@ static int release_cached_info(int spu_i
+ 			printk(KERN_ERR "SPU_PROF: "
+ 				"%s, line %d: "
+ 				"Invalid index %d into spu info cache\n",
+-				__FUNCTION__, __LINE__, spu_index);
++				__func__, __LINE__, spu_index);
+ 			goto out;
+ 		}
+ 		end = spu_index + 1;
+@@ -273,7 +273,7 @@ fail_no_image_cookie:
+ 
+ 	printk(KERN_ERR "SPU_PROF: "
+ 		"%s, line %d: Cannot find dcookie for SPU binary\n",
+-		__FUNCTION__, __LINE__);
++		__func__, __LINE__);
+ 	goto out;
+ }
+ 
+@@ -467,7 +467,7 @@ int spu_sync_stop(void)
+ 	if (ret) {
+ 		printk(KERN_ERR "SPU_PROF: "
+ 			"%s, line %d: spu_switch_event_unregister returned %d\n",
+-			__FUNCTION__, __LINE__, ret);
++			__func__, __LINE__, ret);
+ 		goto out;
+ 	}
+ 
+--- a/arch/powerpc/oprofile/cell/vma_map.c
++++ b/arch/powerpc/oprofile/cell/vma_map.c
+@@ -72,7 +72,7 @@ vma_map_add(struct vma_to_fileoffset_map
+ 		kzalloc(sizeof(struct vma_to_fileoffset_map), GFP_KERNEL);
+ 	if (!new) {
+ 		printk(KERN_ERR "SPU_PROF: %s, line %d: malloc failed\n",
+-		       __FUNCTION__, __LINE__);
++		       __func__, __LINE__);
+ 		vma_map_free(map);
+ 		return NULL;
+ 	}
+@@ -134,19 +134,19 @@ struct vma_to_fileoffset_map *create_vma
+ 	if (memcmp(ehdr.e_ident, expected, EI_PAD) != 0) {
+ 		printk(KERN_ERR "SPU_PROF: "
+ 		       "%s, line %d: Unexpected e_ident parsing SPU ELF\n",
+-		       __FUNCTION__, __LINE__);
++		       __func__, __LINE__);
+ 		goto fail;
+ 	}
+ 	if (ehdr.e_machine != EM_SPU) {
+ 		printk(KERN_ERR "SPU_PROF: "
+ 		       "%s, line %d: Unexpected e_machine parsing SPU ELF\n",
+-		       __FUNCTION__,  __LINE__);
++		       __func__,  __LINE__);
+ 		goto fail;
+ 	}
+ 	if (ehdr.e_type != ET_EXEC) {
+ 		printk(KERN_ERR "SPU_PROF: "
+ 		       "%s, line %d: Unexpected e_type parsing SPU ELF\n",
+-		       __FUNCTION__, __LINE__);
++		       __func__, __LINE__);
+ 		goto fail;
+ 	}
+ 	phdr_start = spu_elf_start + ehdr.e_phoff;
+@@ -232,7 +232,7 @@ struct vma_to_fileoffset_map *create_vma
+ 	if (overlay_tbl_offset < 0) {
+ 		printk(KERN_ERR "SPU_PROF: "
+ 		       "%s, line %d: Error finding SPU overlay table\n",
+-		       __FUNCTION__, __LINE__);
++		       __func__, __LINE__);
+ 		goto fail;
+ 	}
+ 	ovly_table = spu_elf_start + overlay_tbl_offset;
+--- a/arch/powerpc/oprofile/op_model_cell.c
++++ b/arch/powerpc/oprofile/op_model_cell.c
+@@ -216,7 +216,7 @@ static void pm_rtas_reset_signals(u32 no
+ 		 * failure to stop OProfile.
+ 		 */
+ 		printk(KERN_WARNING "%s: rtas returned: %d\n",
+-		       __FUNCTION__, ret);
++		       __func__, ret);
+ }
+ 
+ static int pm_rtas_activate_signals(u32 node, u32 count)
+@@ -255,7 +255,7 @@ static int pm_rtas_activate_signals(u32 
+ 
+ 		if (unlikely(ret)) {
+ 			printk(KERN_WARNING "%s: rtas returned: %d\n",
+-			       __FUNCTION__, ret);
++			       __func__, ret);
+ 			return -EIO;
+ 		}
+ 	}
+@@ -560,7 +560,7 @@ static int cell_reg_setup(struct op_coun
+ 		if (unlikely(spu_rtas_token == RTAS_UNKNOWN_SERVICE)) {
+ 			printk(KERN_ERR
+ 			       "%s: rtas token ibm,cbe-spu-perftools unknown\n",
+-			       __FUNCTION__);
++			       __func__);
+ 			return -EIO;
+ 		}
+ 	}
+@@ -576,7 +576,7 @@ static int cell_reg_setup(struct op_coun
+ 	if (unlikely(pm_rtas_token == RTAS_UNKNOWN_SERVICE)) {
+ 		printk(KERN_ERR
+ 		       "%s: rtas token ibm,cbe-perftools unknown\n",
+-		       __FUNCTION__);
++		       __func__);
+ 		return -EIO;
+ 	}
+ 
+@@ -853,7 +853,7 @@ static int pm_rtas_activate_spu_profilin
+ 
+ 	if (unlikely(ret)) {
+ 		printk(KERN_WARNING "%s: rtas returned: %d\n",
+-		       __FUNCTION__, ret);
++		       __func__, ret);
+ 		return -EIO;
+ 	}
+ 
+@@ -949,7 +949,7 @@ static int cell_global_start_spu(struct 
+ 		if (unlikely(ret != 0)) {
+ 			printk(KERN_ERR
+ 			       "%s: rtas call ibm,cbe-spu-perftools failed, return = %d\n",
+-			       __FUNCTION__, ret);
++			       __func__, ret);
+ 			rtas_error = -EIO;
+ 			goto out;
+ 		}
+@@ -1061,7 +1061,7 @@ static void cell_global_stop_spu(void)
+ 		if (unlikely(rtn_value != 0)) {
+ 			printk(KERN_ERR
+ 			       "%s: rtas call ibm,cbe-spu-perftools failed, return = %d\n",
+-			       __FUNCTION__, rtn_value);
++			       __func__, rtn_value);
+ 		}
+ 
+ 		/* Deactivate the signals */
+--- a/arch/powerpc/platforms/40x/ep405.c
++++ b/arch/powerpc/platforms/40x/ep405.c
+@@ -29,6 +29,7 @@
+ #include <asm/time.h>
+ #include <asm/uic.h>
+ #include <asm/pci-bridge.h>
++#include <asm/ppc4xx.h>
+ 
+ static struct device_node *bcsr_node;
+ static void __iomem *bcsr_regs;
+@@ -119,5 +120,6 @@ define_machine(ep405) {
+ 	.progress		= udbg_progress,
+ 	.init_IRQ		= uic_init_tree,
+ 	.get_irq		= uic_get_irq,
++	.restart		= ppc4xx_reset_system,
+ 	.calibrate_decr		= generic_calibrate_decr,
+ };
+--- a/arch/powerpc/platforms/40x/kilauea.c
++++ b/arch/powerpc/platforms/40x/kilauea.c
+@@ -1,7 +1,7 @@
+ /*
+  * Kilauea board specific routines
+  *
+- * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
++ * Copyright 2007-2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+  *
+  * Based on the Walnut code by
+  * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+@@ -20,6 +20,7 @@
+ #include <asm/time.h>
+ #include <asm/uic.h>
+ #include <asm/pci-bridge.h>
++#include <asm/ppc4xx.h>
+ 
+ static __initdata struct of_device_id kilauea_of_bus[] = {
+ 	{ .compatible = "ibm,plb4", },
+@@ -54,5 +55,6 @@ define_machine(kilauea) {
+ 	.progress 			= udbg_progress,
+ 	.init_IRQ 			= uic_init_tree,
+ 	.get_irq 			= uic_get_irq,
++	.restart			= ppc4xx_reset_system,
+ 	.calibrate_decr			= generic_calibrate_decr,
+ };
+--- a/arch/powerpc/platforms/40x/makalu.c
++++ b/arch/powerpc/platforms/40x/makalu.c
+@@ -20,6 +20,7 @@
+ #include <asm/time.h>
+ #include <asm/uic.h>
+ #include <asm/pci-bridge.h>
++#include <asm/ppc4xx.h>
+ 
+ static __initdata struct of_device_id makalu_of_bus[] = {
+ 	{ .compatible = "ibm,plb4", },
+@@ -54,5 +55,6 @@ define_machine(makalu) {
+ 	.progress 			= udbg_progress,
+ 	.init_IRQ 			= uic_init_tree,
+ 	.get_irq 			= uic_get_irq,
++	.restart			= ppc4xx_reset_system,
+ 	.calibrate_decr			= generic_calibrate_decr,
+ };
+--- a/arch/powerpc/platforms/40x/virtex.c
++++ b/arch/powerpc/platforms/40x/virtex.c
+@@ -14,6 +14,7 @@
+ #include <asm/prom.h>
+ #include <asm/time.h>
+ #include <asm/xilinx_intc.h>
++#include <asm/ppc4xx.h>
+ 
+ static struct of_device_id xilinx_of_bus_ids[] __initdata = {
+ 	{ .compatible = "xlnx,plb-v46-1.00.a", },
+@@ -48,5 +49,6 @@ define_machine(virtex) {
+ 	.probe			= virtex_probe,
+ 	.init_IRQ		= xilinx_intc_init_tree,
+ 	.get_irq		= xilinx_intc_get_irq,
++	.restart		= ppc4xx_reset_system,
+ 	.calibrate_decr		= generic_calibrate_decr,
+ };
+--- a/arch/powerpc/platforms/40x/walnut.c
++++ b/arch/powerpc/platforms/40x/walnut.c
+@@ -26,6 +26,7 @@
+ #include <asm/time.h>
+ #include <asm/uic.h>
+ #include <asm/pci-bridge.h>
++#include <asm/ppc4xx.h>
+ 
+ static __initdata struct of_device_id walnut_of_bus[] = {
+ 	{ .compatible = "ibm,plb3", },
+@@ -61,5 +62,6 @@ define_machine(walnut) {
+ 	.progress		= udbg_progress,
+ 	.init_IRQ		= uic_init_tree,
+ 	.get_irq		= uic_get_irq,
+-	.calibrate_decr	= generic_calibrate_decr,
++	.restart		= ppc4xx_reset_system,
++	.calibrate_decr		= generic_calibrate_decr,
+ };
+--- a/arch/powerpc/platforms/44x/44x.h
++++ b/arch/powerpc/platforms/44x/44x.h
+@@ -3,6 +3,5 @@
+ 
+ extern u8 as1_readb(volatile u8 __iomem  *addr);
+ extern void as1_writeb(u8 data, volatile u8 __iomem *addr);
+-extern void ppc44x_reset_system(char *cmd);
+ 
+ #endif /* __POWERPC_PLATFORMS_44X_44X_H */
+--- a/arch/powerpc/platforms/44x/Kconfig
++++ b/arch/powerpc/platforms/44x/Kconfig
+@@ -67,6 +67,25 @@ config WARP
+ 	  See http://www.pikatechnologies.com/ and follow the "PIKA for Computer
+ 	  Telephony Developers" link for more information.
+ 
++config CANYONLANDS
++	bool "Canyonlands"
++	depends on 44x
++	default n
++	select 460EX
++	select PCI
++	select PPC4xx_PCI_EXPRESS
++	help
++	  This option enables support for the AMCC PPC460EX evaluation board.
++
++config YOSEMITE
++	bool "Yosemite"
++	depends on 44x
++	default n
++	select 440EP
++	select PCI
++	help
++	  This option enables support for the AMCC PPC440EP evaluation board.
++
+ #config LUAN
+ #	bool "Luan"
+ #	depends on 44x
+@@ -122,6 +141,14 @@ config 440SPe
+ 	bool
+ 	select IBM_NEW_EMAC_EMAC4
+ 
++config 460EX
++	bool
++	select PPC_FPU
++	select IBM_NEW_EMAC_EMAC4
++	select IBM_NEW_EMAC_RGMII
++	select IBM_NEW_EMAC_ZMII
++	select IBM_NEW_EMAC_TAH
++
+ # 44x errata/workaround config symbols, selected by the CPU models above
+ config IBM440EP_ERR42
+ 	bool
+--- a/arch/powerpc/platforms/44x/Makefile
++++ b/arch/powerpc/platforms/44x/Makefile
+@@ -1,9 +1,11 @@
+-obj-$(CONFIG_44x)	:= misc_44x.o
++obj-$(CONFIG_44x)	:= misc_44x.o idle.o
+ obj-$(CONFIG_EBONY)	+= ebony.o
+ obj-$(CONFIG_TAISHAN)	+= taishan.o
+ obj-$(CONFIG_BAMBOO)	+= bamboo.o
++obj-$(CONFIG_YOSEMITE)	+= bamboo.o
+ obj-$(CONFIG_SEQUOIA)	+= sequoia.o
+ obj-$(CONFIG_KATMAI)	+= katmai.o
+ obj-$(CONFIG_RAINIER)	+= rainier.o
+ obj-$(CONFIG_WARP)	+= warp.o
+ obj-$(CONFIG_WARP)	+= warp-nand.o
++obj-$(CONFIG_CANYONLANDS) += canyonlands.o
+--- a/arch/powerpc/platforms/44x/bamboo.c
++++ b/arch/powerpc/platforms/44x/bamboo.c
+@@ -22,8 +22,7 @@
+ #include <asm/time.h>
+ #include <asm/uic.h>
+ #include <asm/pci-bridge.h>
+-
+-#include "44x.h"
++#include <asm/ppc4xx.h>
+ 
+ static __initdata struct of_device_id bamboo_of_bus[] = {
+ 	{ .compatible = "ibm,plb4", },
+@@ -53,11 +52,11 @@ static int __init bamboo_probe(void)
+ }
+ 
+ define_machine(bamboo) {
+-	.name 				= "Bamboo",
+-	.probe 				= bamboo_probe,
+-	.progress 			= udbg_progress,
+-	.init_IRQ 			= uic_init_tree,
+-	.get_irq 			= uic_get_irq,
+-	.restart			= ppc44x_reset_system,
++	.name 			= "Bamboo",
++	.probe 			= bamboo_probe,
++	.progress 		= udbg_progress,
++	.init_IRQ 		= uic_init_tree,
++	.get_irq 		= uic_get_irq,
++	.restart		= ppc4xx_reset_system,
+ 	.calibrate_decr 	= generic_calibrate_decr,
+ };
+--- /dev/null
++++ b/arch/powerpc/platforms/44x/canyonlands.c
+@@ -0,0 +1,63 @@
++/*
++ * Canyonlands board specific routines
++ *
++ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
++ *
++ * Based on the Katmai code by
++ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
++ * Copyright 2007 IBM Corp.
++ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
++ * Copyright 2007 IBM Corporation
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++#include <linux/init.h>
++#include <linux/of_platform.h>
++
++#include <asm/machdep.h>
++#include <asm/prom.h>
++#include <asm/udbg.h>
++#include <asm/time.h>
++#include <asm/uic.h>
++#include <asm/pci-bridge.h>
++#include <asm/ppc4xx.h>
++
++static __initdata struct of_device_id canyonlands_of_bus[] = {
++	{ .compatible = "ibm,plb4", },
++	{ .compatible = "ibm,opb", },
++	{ .compatible = "ibm,ebc", },
++	{},
++};
++
++static int __init canyonlands_device_probe(void)
++{
++	of_platform_bus_probe(NULL, canyonlands_of_bus, NULL);
++
++	return 0;
++}
++machine_device_initcall(canyonlands, canyonlands_device_probe);
++
++static int __init canyonlands_probe(void)
++{
++	unsigned long root = of_get_flat_dt_root();
++
++	if (!of_flat_dt_is_compatible(root, "amcc,canyonlands"))
++		return 0;
++
++	ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
++
++	return 1;
++}
++
++define_machine(canyonlands) {
++	.name 				= "Canyonlands",
++	.probe 				= canyonlands_probe,
++	.progress 			= udbg_progress,
++	.init_IRQ 			= uic_init_tree,
++	.get_irq 			= uic_get_irq,
++	.restart			= ppc4xx_reset_system,
++	.calibrate_decr			= generic_calibrate_decr,
++};
+--- a/arch/powerpc/platforms/44x/ebony.c
++++ b/arch/powerpc/platforms/44x/ebony.c
+@@ -26,8 +26,7 @@
+ #include <asm/time.h>
+ #include <asm/uic.h>
+ #include <asm/pci-bridge.h>
+-
+-#include "44x.h"
++#include <asm/ppc4xx.h>
+ 
+ static __initdata struct of_device_id ebony_of_bus[] = {
+ 	{ .compatible = "ibm,plb4", },
+@@ -66,6 +65,6 @@ define_machine(ebony) {
+ 	.progress		= udbg_progress,
+ 	.init_IRQ		= uic_init_tree,
+ 	.get_irq		= uic_get_irq,
+-	.restart		= ppc44x_reset_system,
++	.restart		= ppc4xx_reset_system,
+ 	.calibrate_decr		= generic_calibrate_decr,
+ };
+--- /dev/null
++++ b/arch/powerpc/platforms/44x/idle.c
+@@ -0,0 +1,67 @@
++/*
++ * Copyright 2008 IBM Corp. 
++ *
++ * Based on arch/powerpc/platforms/pasemi/idle.c: 
++ * Copyright (C) 2006-2007 PA Semi, Inc
++ *
++ * Added by: Jerone Young <jyoung5@us.ibm.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
++ *
++ */
++
++#include <linux/of.h>
++#include <linux/kernel.h>
++#include <asm/machdep.h>
++
++static int mode_spin;
++
++static void ppc44x_idle(void)
++{
++	unsigned long msr_save;
++
++	msr_save = mfmsr();
++	/* set wait state MSR */
++	mtmsr(msr_save|MSR_WE|MSR_EE|MSR_CE|MSR_DE);
++	isync();
++	/* return to initial state */
++	mtmsr(msr_save);
++	isync();
++}
++
++int __init ppc44x_idle_init(void)
++{
++	if (!mode_spin) {
++		/* If we are not setting spin mode 
++                   then we set to wait mode */
++		ppc_md.power_save = &ppc44x_idle;
++	}
++
++	return 0;
++}
++
++arch_initcall(ppc44x_idle_init);
++
++static int __init idle_param(char *p)
++{ 
++
++	if (!strcmp("spin", p)) {
++		mode_spin = 1;
++		ppc_md.power_save = NULL;
++	}
++
++	return 0;
++}
++
++early_param("idle", idle_param);
+--- a/arch/powerpc/platforms/44x/katmai.c
++++ b/arch/powerpc/platforms/44x/katmai.c
+@@ -22,8 +22,7 @@
+ #include <asm/time.h>
+ #include <asm/uic.h>
+ #include <asm/pci-bridge.h>
+-
+-#include "44x.h"
++#include <asm/ppc4xx.h>
+ 
+ static __initdata struct of_device_id katmai_of_bus[] = {
+ 	{ .compatible = "ibm,plb4", },
+@@ -58,6 +57,6 @@ define_machine(katmai) {
+ 	.progress 			= udbg_progress,
+ 	.init_IRQ 			= uic_init_tree,
+ 	.get_irq 			= uic_get_irq,
+-	.restart			= ppc44x_reset_system,
++	.restart			= ppc4xx_reset_system,
+ 	.calibrate_decr			= generic_calibrate_decr,
+ };
+--- a/arch/powerpc/platforms/44x/misc_44x.S
++++ b/arch/powerpc/platforms/44x/misc_44x.S
+@@ -44,14 +44,3 @@ _GLOBAL(as1_writeb)
+ 	sync
+ 	isync
+ 	blr
+-
+-/*
+- * void ppc44x_reset_system(char *cmd)
+- *
+- * At present, this routine just applies a system reset.
+- */
+-_GLOBAL(ppc44x_reset_system)
+-	mfspr	r13,SPRN_DBCR0
+-	oris	r13,r13,DBCR0_RST_SYSTEM@h
+-	mtspr	SPRN_DBCR0,r13
+-	b	.			/* Just in case the reset doesn't work */
+--- a/arch/powerpc/platforms/44x/rainier.c
++++ b/arch/powerpc/platforms/44x/rainier.c
+@@ -22,7 +22,7 @@
+ #include <asm/time.h>
+ #include <asm/uic.h>
+ #include <asm/pci-bridge.h>
+-#include "44x.h"
++#include <asm/ppc4xx.h>
+ 
+ static __initdata struct of_device_id rainier_of_bus[] = {
+ 	{ .compatible = "ibm,plb4", },
+@@ -57,6 +57,6 @@ define_machine(rainier) {
+ 	.progress 			= udbg_progress,
+ 	.init_IRQ 			= uic_init_tree,
+ 	.get_irq 			= uic_get_irq,
+-	.restart			= ppc44x_reset_system,
++	.restart			= ppc4xx_reset_system,
+ 	.calibrate_decr			= generic_calibrate_decr,
+ };
+--- a/arch/powerpc/platforms/44x/sequoia.c
++++ b/arch/powerpc/platforms/44x/sequoia.c
+@@ -23,7 +23,7 @@
+ #include <asm/uic.h>
+ #include <asm/pci-bridge.h>
+ 
+-#include "44x.h"
++#include <asm/ppc4xx.h>
+ 
+ static __initdata struct of_device_id sequoia_of_bus[] = {
+ 	{ .compatible = "ibm,plb4", },
+@@ -58,6 +58,6 @@ define_machine(sequoia) {
+ 	.progress 			= udbg_progress,
+ 	.init_IRQ 			= uic_init_tree,
+ 	.get_irq 			= uic_get_irq,
+-	.restart			= ppc44x_reset_system,
++	.restart			= ppc4xx_reset_system,
+ 	.calibrate_decr			= generic_calibrate_decr,
+ };
+--- a/arch/powerpc/platforms/44x/taishan.c
++++ b/arch/powerpc/platforms/44x/taishan.c
+@@ -29,8 +29,7 @@
+ #include <asm/time.h>
+ #include <asm/uic.h>
+ #include <asm/pci-bridge.h>
+-
+-#include "44x.h"
++#include <asm/ppc4xx.h>
+ 
+ static __initdata struct of_device_id taishan_of_bus[] = {
+ 	{ .compatible = "ibm,plb4", },
+@@ -68,6 +67,6 @@ define_machine(taishan) {
+ 	.progress		= udbg_progress,
+ 	.init_IRQ		= uic_init_tree,
+ 	.get_irq		= uic_get_irq,
+-	.restart		= ppc44x_reset_system,
++	.restart		= ppc4xx_reset_system,
+ 	.calibrate_decr		= generic_calibrate_decr,
+ };
+--- a/arch/powerpc/platforms/44x/warp-nand.c
++++ b/arch/powerpc/platforms/44x/warp-nand.c
+@@ -11,6 +11,7 @@
+ #include <linux/mtd/partitions.h>
+ #include <linux/mtd/nand.h>
+ #include <linux/mtd/ndfc.h>
++#include <asm/machdep.h>
+ 
+ #ifdef CONFIG_MTD_NAND_NDFC
+ 
+@@ -100,6 +101,6 @@ static int warp_setup_nand_flash(void)
+ 
+ 	return 0;
+ }
+-device_initcall(warp_setup_nand_flash);
++machine_device_initcall(warp, warp_setup_nand_flash);
+ 
+ #endif
+--- a/arch/powerpc/platforms/44x/warp.c
++++ b/arch/powerpc/platforms/44x/warp.c
+@@ -18,9 +18,7 @@
+ #include <asm/udbg.h>
+ #include <asm/time.h>
+ #include <asm/uic.h>
+-
+-#include "44x.h"
+-
++#include <asm/ppc4xx.h>
+ 
+ static __initdata struct of_device_id warp_of_bus[] = {
+ 	{ .compatible = "ibm,plb4", },
+@@ -49,7 +47,7 @@ define_machine(warp) {
+ 	.progress 	= udbg_progress,
+ 	.init_IRQ 	= uic_init_tree,
+ 	.get_irq 	= uic_get_irq,
+-	.restart	= ppc44x_reset_system,
++	.restart	= ppc4xx_reset_system,
+ 	.calibrate_decr = generic_calibrate_decr,
+ };
+ 
+--- a/arch/powerpc/platforms/52xx/lite5200.c
++++ b/arch/powerpc/platforms/52xx/lite5200.c
+@@ -63,7 +63,7 @@ lite5200_fix_clock_config(void)
+ 	of_node_put(np);
+ 	if (!cdm) {
+ 		printk(KERN_ERR "%s() failed; expect abnormal behaviour\n",
+-		       __FUNCTION__);
++		       __func__);
+ 		return;
+ 	}
+ 
+@@ -98,7 +98,7 @@ lite5200_fix_port_config(void)
+ 	of_node_put(np);
+ 	if (!gpio) {
+ 		printk(KERN_ERR "%s() failed. expect abnormal behavior\n",
+-		       __FUNCTION__);
++		       __func__);
+ 		return;
+ 	}
+ 
+--- a/arch/powerpc/platforms/82xx/Kconfig
++++ b/arch/powerpc/platforms/82xx/Kconfig
+@@ -11,7 +11,6 @@ config MPC8272_ADS
+ 	select 8260
+ 	select FSL_SOC
+ 	select PQ2_ADS_PCI_PIC if PCI
+-	select PPC_CPM_NEW_BINDING
+ 	help
+ 	  This option enables support for the MPC8272 ADS board
+ 
+@@ -22,7 +21,6 @@ config PQ2FADS
+ 	select 8260
+ 	select FSL_SOC
+ 	select PQ2_ADS_PCI_PIC if PCI
+-	select PPC_CPM_NEW_BINDING
+ 	help
+ 	  This option enables support for the PQ2FADS board
+ 
+@@ -31,7 +29,6 @@ config EP8248E
+ 	select 8272
+ 	select 8260
+ 	select FSL_SOC
+-	select PPC_CPM_NEW_BINDING
+ 	select MDIO_BITBANG
+ 	help
+ 	  This enables support for the Embedded Planet EP8248E board.
+--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
++++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+@@ -46,6 +46,7 @@ static void __init mpc837x_rdb_setup_arc
+ static struct of_device_id mpc837x_ids[] = {
+ 	{ .type = "soc", },
+ 	{ .compatible = "soc", },
++	{ .compatible = "simple-bus", },
+ 	{},
+ };
+ 
+--- a/arch/powerpc/platforms/83xx/mpc83xx.h
++++ b/arch/powerpc/platforms/83xx/mpc83xx.h
+@@ -16,6 +16,7 @@
+ #define MPC83XX_SCCR_USB_DRCM_10   0x00200000
+ #define MPC8315_SCCR_USB_MASK      0x00c00000
+ #define MPC8315_SCCR_USB_DRCM_11   0x00c00000
++#define MPC8315_SCCR_USB_DRCM_01   0x00400000
+ #define MPC837X_SCCR_USB_DRCM_11   0x00c00000
+ 
+ /* system i/o configuration register low */
+@@ -37,6 +38,7 @@
+ /* USB Control Register */
+ #define FSL_USB2_CONTROL_OFFS      0x500
+ #define CONTROL_UTMI_PHY_EN        0x00000200
++#define CONTROL_REFSEL_24MHZ       0x00000040
+ #define CONTROL_REFSEL_48MHZ       0x00000080
+ #define CONTROL_PHY_CLK_SEL_ULPI   0x00000400
+ #define CONTROL_OTG_PORT           0x00000020
+--- a/arch/powerpc/platforms/83xx/usb.c
++++ b/arch/powerpc/platforms/83xx/usb.c
+@@ -129,7 +129,7 @@ int mpc831x_usb_cfg(void)
+ 	if (immr_node && of_device_is_compatible(immr_node, "fsl,mpc8315-immr"))
+ 		clrsetbits_be32(immap + MPC83XX_SCCR_OFFS,
+ 		                MPC8315_SCCR_USB_MASK,
+-		                MPC8315_SCCR_USB_DRCM_11);
++		                MPC8315_SCCR_USB_DRCM_01);
+ 	else
+ 		clrsetbits_be32(immap + MPC83XX_SCCR_OFFS,
+ 		                MPC83XX_SCCR_USB_MASK,
+@@ -164,9 +164,15 @@ int mpc831x_usb_cfg(void)
+ 	/* Using on-chip PHY */
+ 	if (prop && (!strcmp(prop, "utmi_wide") ||
+ 		     !strcmp(prop, "utmi"))) {
+-		/* Set UTMI_PHY_EN, REFSEL to 48MHZ */
++		u32 refsel;
++
++		if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr"))
++			refsel = CONTROL_REFSEL_24MHZ;
++		else
++			refsel = CONTROL_REFSEL_48MHZ;
++		/* Set UTMI_PHY_EN and REFSEL */
+ 		out_be32(usb_regs + FSL_USB2_CONTROL_OFFS,
+-				CONTROL_UTMI_PHY_EN | CONTROL_REFSEL_48MHZ);
++				CONTROL_UTMI_PHY_EN | refsel);
+ 	/* Using external UPLI PHY */
+ 	} else if (prop && !strcmp(prop, "ulpi")) {
+ 		/* Set PHY_CLK_SEL to ULPI */
+--- a/arch/powerpc/platforms/85xx/Kconfig
++++ b/arch/powerpc/platforms/85xx/Kconfig
+@@ -19,7 +19,6 @@ config MPC8540_ADS
+ config MPC8560_ADS
+ 	bool "Freescale MPC8560 ADS"
+ 	select DEFAULT_UIMAGE
+-	select PPC_CPM_NEW_BINDING
+ 	select CPM2
+ 	help
+ 	  This option enables support for the MPC 8560 ADS board
+@@ -46,6 +45,12 @@ config MPC85xx_DS
+ 	help
+ 	  This option enables support for the MPC85xx DS (MPC8544 DS) board
+ 
++config KSI8560
++        bool "Emerson KSI8560"
++        select DEFAULT_UIMAGE
++        help
++          This option enables support for the Emerson KSI8560 board
++
+ config STX_GP3
+ 	bool "Silicon Turnkey Express GP3"
+ 	help
+@@ -53,14 +58,12 @@ config STX_GP3
+ 	  board.
+ 	select CPM2
+ 	select DEFAULT_UIMAGE
+-	select PPC_CPM_NEW_BINDING
+ 
+ config TQM8540
+ 	bool "TQ Components TQM8540"
+ 	help
+ 	  This option enables support for the TQ Components TQM8540 board.
+ 	select DEFAULT_UIMAGE
+-	select PPC_CPM_NEW_BINDING
+ 	select TQM85xx
+ 
+ config TQM8541
+@@ -68,7 +71,6 @@ config TQM8541
+ 	help
+ 	  This option enables support for the TQ Components TQM8541 board.
+ 	select DEFAULT_UIMAGE
+-	select PPC_CPM_NEW_BINDING
+ 	select TQM85xx
+ 	select CPM2
+ 
+@@ -77,7 +79,6 @@ config TQM8555
+ 	help
+ 	  This option enables support for the TQ Components TQM8555 board.
+ 	select DEFAULT_UIMAGE
+-	select PPC_CPM_NEW_BINDING
+ 	select TQM85xx
+ 	select CPM2
+ 
+@@ -86,7 +87,6 @@ config TQM8560
+ 	help
+ 	  This option enables support for the TQ Components TQM8560 board.
+ 	select DEFAULT_UIMAGE
+-	select PPC_CPM_NEW_BINDING
+ 	select TQM85xx
+ 	select CPM2
+ 
+@@ -99,7 +99,6 @@ config SBC8548
+ config SBC8560
+ 	bool "Wind River SBC8560"
+ 	select DEFAULT_UIMAGE
+-	select PPC_CPM_NEW_BINDING if CPM2
+ 	help
+ 	  This option enables support for the Wind River SBC8560 board
+ 
+--- a/arch/powerpc/platforms/85xx/Makefile
++++ b/arch/powerpc/platforms/85xx/Makefile
+@@ -10,3 +10,4 @@ obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
+ obj-$(CONFIG_TQM85xx)	  += tqm85xx.o
+ obj-$(CONFIG_SBC8560)     += sbc8560.o
+ obj-$(CONFIG_SBC8548)     += sbc8548.o
++obj-$(CONFIG_KSI8560)	  += ksi8560.o
+--- /dev/null
++++ b/arch/powerpc/platforms/85xx/ksi8560.c
+@@ -0,0 +1,257 @@
++/*
++ * Board setup routines for the Emerson KSI8560
++ *
++ * Author: Alexandr Smirnov <asmirnov@ru.mvista.com>
++ *
++ * Based on mpc85xx_ads.c maintained by Kumar Gala
++ *
++ * 2008 (c) MontaVista, Software, Inc.  This file is licensed under
++ * the terms of the GNU General Public License version 2.  This program
++ * is licensed "as is" without any warranty of any kind, whether express
++ * or implied.
++ *
++ */
++
++#include <linux/stddef.h>
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/kdev_t.h>
++#include <linux/delay.h>
++#include <linux/seq_file.h>
++#include <linux/of_platform.h>
++
++#include <asm/system.h>
++#include <asm/time.h>
++#include <asm/machdep.h>
++#include <asm/pci-bridge.h>
++#include <asm/mpic.h>
++#include <mm/mmu_decl.h>
++#include <asm/udbg.h>
++#include <asm/prom.h>
++
++#include <sysdev/fsl_soc.h>
++#include <sysdev/fsl_pci.h>
++
++#include <asm/cpm2.h>
++#include <sysdev/cpm2_pic.h>
++
++
++#define KSI8560_CPLD_HVR		0x04 /* Hardware Version Register */
++#define KSI8560_CPLD_PVR		0x08 /* PLD Version Register */
++#define KSI8560_CPLD_RCR1		0x30 /* Reset Command Register 1 */
++
++#define KSI8560_CPLD_RCR1_CPUHR		0x80 /* CPU Hard Reset */
++
++static void __iomem *cpld_base = NULL;
++
++static void machine_restart(char *cmd)
++{
++	if (cpld_base)
++		out_8(cpld_base + KSI8560_CPLD_RCR1, KSI8560_CPLD_RCR1_CPUHR);
++	else
++		printk(KERN_ERR "Can't find CPLD base, hang forever\n");
++
++	for (;;);
++}
++
++static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
++{
++	int cascade_irq;
++
++	while ((cascade_irq = cpm2_get_irq()) >= 0)
++		generic_handle_irq(cascade_irq);
++
++	desc->chip->eoi(irq);
++}
++
++static void __init ksi8560_pic_init(void)
++{
++	struct mpic *mpic;
++	struct resource r;
++	struct device_node *np;
++#ifdef CONFIG_CPM2
++	int irq;
++#endif
++
++	np = of_find_node_by_type(NULL, "open-pic");
++
++	if (np == NULL) {
++		printk(KERN_ERR "Could not find open-pic node\n");
++		return;
++	}
++
++	if (of_address_to_resource(np, 0, &r)) {
++		printk(KERN_ERR "Could not map mpic register space\n");
++		of_node_put(np);
++		return;
++	}
++
++	mpic = mpic_alloc(np, r.start,
++			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
++			0, 256, " OpenPIC  ");
++	BUG_ON(mpic == NULL);
++	of_node_put(np);
++
++	mpic_init(mpic);
++
++#ifdef CONFIG_CPM2
++	/* Setup CPM2 PIC */
++	np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
++	if (np == NULL) {
++		printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
++		return;
++	}
++	irq = irq_of_parse_and_map(np, 0);
++
++	cpm2_pic_init(np);
++	of_node_put(np);
++	set_irq_chained_handler(irq, cpm2_cascade);
++
++	setup_irq(0, NULL);
++#endif
++}
++
++#ifdef CONFIG_CPM2
++/*
++ * Setup I/O ports
++ */
++struct cpm_pin {
++	int port, pin, flags;
++};
++
++static struct cpm_pin __initdata ksi8560_pins[] = {
++	/* SCC1 */
++	{3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
++	{3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
++	{3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
++
++	/* SCC2 */
++	{3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
++	{3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
++	{3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
++
++	/* FCC1 */
++	{0, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
++	{0, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
++	{0, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
++	{0, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
++	{0, 18, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
++	{0, 19, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
++	{0, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
++	{0, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
++	{0, 26, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
++	{0, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
++	{0, 28, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
++	{0, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
++	{0, 30, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
++	{0, 31, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
++	{2, 23, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK9 */
++	{2, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK10 */
++
++};
++
++static void __init init_ioports(void)
++{
++	int i;
++
++	for (i = 0; i < ARRAY_SIZE(ksi8560_pins); i++) {
++		struct cpm_pin *pin = &ksi8560_pins[i];
++		cpm2_set_pin(pin->port, pin->pin, pin->flags);
++	}
++
++	cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
++	cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
++	cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX);
++	cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX);
++	cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK9, CPM_CLK_RX);
++	cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK10, CPM_CLK_TX);
++}
++#endif
++
++/*
++ * Setup the architecture
++ */
++static void __init ksi8560_setup_arch(void)
++{
++	struct device_node *cpld;
++
++	cpld = of_find_compatible_node(NULL, NULL, "emerson,KSI8560-cpld");
++	if (cpld)
++		cpld_base = of_iomap(cpld, 0);
++	else
++		printk(KERN_ERR "Can't find CPLD in device tree\n");
++
++	if (ppc_md.progress)
++		ppc_md.progress("ksi8560_setup_arch()", 0);
++
++#ifdef CONFIG_CPM2
++	cpm2_reset();
++	init_ioports();
++#endif
++}
++
++static void ksi8560_show_cpuinfo(struct seq_file *m)
++{
++	uint pvid, svid, phid1;
++	uint memsize = total_memory;
++
++	pvid = mfspr(SPRN_PVR);
++	svid = mfspr(SPRN_SVR);
++
++	seq_printf(m, "Vendor\t\t: Emerson Network Power\n");
++	seq_printf(m, "Board\t\t: KSI8560\n");
++
++	if (cpld_base) {
++		seq_printf(m, "Hardware rev\t: %d\n",
++					in_8(cpld_base + KSI8560_CPLD_HVR));
++		seq_printf(m, "CPLD rev\t: %d\n",
++					in_8(cpld_base + KSI8560_CPLD_PVR));
++	} else
++		seq_printf(m, "Unknown Hardware and CPLD revs\n");
++
++	seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
++	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
++
++	/* Display cpu Pll setting */
++	phid1 = mfspr(SPRN_HID1);
++	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
++
++	/* Display the amount of memory */
++	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
++}
++
++static struct of_device_id __initdata of_bus_ids[] = {
++	{ .type = "soc", },
++	{ .name = "cpm", },
++	{ .name = "localbus", },
++	{},
++};
++
++static int __init declare_of_platform_devices(void)
++{
++	of_platform_bus_probe(NULL, of_bus_ids, NULL);
++
++	return 0;
++}
++machine_device_initcall(ksi8560, declare_of_platform_devices);
++
++/*
++ * Called very early, device-tree isn't unflattened
++ */
++static int __init ksi8560_probe(void)
++{
++	unsigned long root = of_get_flat_dt_root();
++
++	return of_flat_dt_is_compatible(root, "emerson,KSI8560");
++}
++
++define_machine(ksi8560) {
++	.name			= "KSI8560",
++	.probe			= ksi8560_probe,
++	.setup_arch		= ksi8560_setup_arch,
++	.init_IRQ		= ksi8560_pic_init,
++	.show_cpuinfo		= ksi8560_show_cpuinfo,
++	.get_irq		= mpic_get_irq,
++	.restart		= machine_restart,
++	.calibrate_decr		= generic_calibrate_decr,
++};
+--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
++++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+@@ -165,7 +165,7 @@ static void __init init_ioports(void)
+ 	int i;
+ 
+ 	for (i = 0; i < ARRAY_SIZE(mpc8560_ads_pins); i++) {
+-		struct cpm_pin *pin = &mpc8560_ads_pins[i];
++		const struct cpm_pin *pin = &mpc8560_ads_pins[i];
+ 		cpm2_set_pin(pin->port, pin->pin, pin->flags);
+ 	}
+ 
+--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
++++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+@@ -19,6 +19,7 @@
+ #include <linux/delay.h>
+ #include <linux/seq_file.h>
+ #include <linux/interrupt.h>
++#include <linux/of_platform.h>
+ 
+ #include <asm/system.h>
+ #include <asm/time.h>
+@@ -36,7 +37,7 @@
+ #undef DEBUG
+ 
+ #ifdef DEBUG
+-#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
++#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
+ #else
+ #define DBG(fmt, args...)
+ #endif
+@@ -183,6 +184,18 @@ static int __init mpc8544_ds_probe(void)
+ 	}
+ }
+ 
++static struct of_device_id mpc85xxds_ids[] = {
++	{ .type = "soc", },
++	{ .compatible = "soc", },
++	{},
++};
++
++static int __init mpc85xxds_publish_devices(void)
++{
++	return of_platform_bus_probe(NULL, mpc85xxds_ids, NULL);
++}
++machine_device_initcall(mpc8544_ds, mpc85xxds_publish_devices);
++
+ /*
+  * Called very early, device-tree isn't unflattened
+  */
+--- a/arch/powerpc/platforms/86xx/Kconfig
++++ b/arch/powerpc/platforms/86xx/Kconfig
+@@ -11,6 +11,12 @@ config MPC8641_HPCN
+ 	help
+ 	  This option enables support for the MPC8641 HPCN board.
+ 
++config SBC8641D
++	bool "Wind River SBC8641D"
++	select DEFAULT_UIMAGE
++	help
++	  This option enables support for the WRS SBC8641D board.
++
+ config MPC8610_HPCD
+ 	bool "Freescale MPC8610 HPCD"
+ 	select DEFAULT_UIMAGE
+@@ -24,7 +30,7 @@ config MPC8641
+ 	select FSL_PCI if PCI
+ 	select PPC_UDBG_16550
+ 	select MPIC
+-	default y if MPC8641_HPCN
++	default y if MPC8641_HPCN || SBC8641D
+ 
+ config MPC8610
+ 	bool
+--- a/arch/powerpc/platforms/86xx/Makefile
++++ b/arch/powerpc/platforms/86xx/Makefile
+@@ -4,4 +4,5 @@
+ 
+ obj-$(CONFIG_SMP)		+= mpc86xx_smp.o
+ obj-$(CONFIG_MPC8641_HPCN)	+= mpc86xx_hpcn.o
++obj-$(CONFIG_SBC8641D)		+= sbc8641d.o
+ obj-$(CONFIG_MPC8610_HPCD)	+= mpc8610_hpcd.o
+--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
++++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+@@ -52,7 +52,7 @@ static int __init mpc8610_declare_of_pla
+ }
+ machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices);
+ 
+-void __init
++static void __init
+ mpc86xx_hpcd_init_irq(void)
+ {
+ 	struct mpic *mpic1;
+@@ -200,7 +200,7 @@ static int __init mpc86xx_hpcd_probe(voi
+ 	return 0;
+ }
+ 
+-long __init
++static long __init
+ mpc86xx_time_init(void)
+ {
+ 	unsigned int temp;
+--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
++++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+@@ -55,7 +55,7 @@ static void mpc86xx_8259_cascade(unsigne
+ }
+ #endif	/* CONFIG_PCI */
+ 
+-void __init
++static void __init
+ mpc86xx_hpcn_init_irq(void)
+ {
+ 	struct mpic *mpic1;
+@@ -162,7 +162,7 @@ mpc86xx_hpcn_setup_arch(void)
+ }
+ 
+ 
+-void
++static void
+ mpc86xx_hpcn_show_cpuinfo(struct seq_file *m)
+ {
+ 	struct device_node *root;
+@@ -190,13 +190,19 @@ static int __init mpc86xx_hpcn_probe(voi
+ {
+ 	unsigned long root = of_get_flat_dt_root();
+ 
+-	if (of_flat_dt_is_compatible(root, "mpc86xx"))
++	if (of_flat_dt_is_compatible(root, "fsl,mpc8641hpcn"))
+ 		return 1;	/* Looks good */
+ 
++	/* Be nice and don't give silent boot death.  Delete this in 2.6.27 */
++	if (of_flat_dt_is_compatible(root, "mpc86xx")) {
++		pr_warning("WARNING: your dts/dtb is old. You must update before the next kernel release\n");
++		return 1;
++	}
++
+ 	return 0;
+ }
+ 
+-long __init
++static long __init
+ mpc86xx_time_init(void)
+ {
+ 	unsigned int temp;
+--- /dev/null
++++ b/arch/powerpc/platforms/86xx/sbc8641d.c
+@@ -0,0 +1,164 @@
++/*
++ * SBC8641D board specific routines
++ *
++ * Copyright 2008 Wind River Systems Inc.
++ *
++ * By Paul Gortmaker (see MAINTAINERS for contact information)
++ *
++ * Based largely on the 8641 HPCN support by Freescale Semiconductor Inc.
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#include <linux/stddef.h>
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/kdev_t.h>
++#include <linux/delay.h>
++#include <linux/seq_file.h>
++#include <linux/of_platform.h>
++
++#include <asm/system.h>
++#include <asm/time.h>
++#include <asm/machdep.h>
++#include <asm/pci-bridge.h>
++#include <asm/mpc86xx.h>
++#include <asm/prom.h>
++#include <mm/mmu_decl.h>
++#include <asm/udbg.h>
++
++#include <asm/mpic.h>
++
++#include <sysdev/fsl_pci.h>
++#include <sysdev/fsl_soc.h>
++
++#include "mpc86xx.h"
++
++static void __init
++sbc8641_init_irq(void)
++{
++	struct mpic *mpic1;
++	struct device_node *np;
++	struct resource res;
++
++	/* Determine PIC address. */
++	np = of_find_node_by_type(NULL, "open-pic");
++	if (np == NULL)
++		return;
++	of_address_to_resource(np, 0, &res);
++
++	/* Alloc mpic structure and per isu has 16 INT entries. */
++	mpic1 = mpic_alloc(np, res.start,
++			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
++			0, 256, " MPIC     ");
++	of_node_put(np);
++	BUG_ON(mpic1 == NULL);
++
++	mpic_init(mpic1);
++}
++
++static void __init
++sbc8641_setup_arch(void)
++{
++#ifdef CONFIG_PCI
++	struct device_node *np;
++#endif
++
++	if (ppc_md.progress)
++		ppc_md.progress("sbc8641_setup_arch()", 0);
++
++#ifdef CONFIG_PCI
++	for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie")
++		fsl_add_bridge(np, 0);
++#endif
++
++	printk("SBC8641 board from Wind River\n");
++
++#ifdef CONFIG_SMP
++	mpc86xx_smp_init();
++#endif
++}
++
++
++static void
++sbc8641_show_cpuinfo(struct seq_file *m)
++{
++	struct device_node *root;
++	uint memsize = total_memory;
++	const char *model = "";
++	uint svid = mfspr(SPRN_SVR);
++
++	seq_printf(m, "Vendor\t\t: Wind River Systems\n");
++
++	root = of_find_node_by_path("/");
++	if (root)
++		model = of_get_property(root, "model", NULL);
++	seq_printf(m, "Machine\t\t: %s\n", model);
++	of_node_put(root);
++
++	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
++	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
++}
++
++
++/*
++ * Called very early, device-tree isn't unflattened
++ */
++static int __init sbc8641_probe(void)
++{
++	unsigned long root = of_get_flat_dt_root();
++
++	if (of_flat_dt_is_compatible(root, "wind,sbc8641"))
++		return 1;	/* Looks good */
++
++	return 0;
++}
++
++static long __init
++mpc86xx_time_init(void)
++{
++	unsigned int temp;
++
++	/* Set the time base to zero */
++	mtspr(SPRN_TBWL, 0);
++	mtspr(SPRN_TBWU, 0);
++
++	temp = mfspr(SPRN_HID0);
++	temp |= HID0_TBEN;
++	mtspr(SPRN_HID0, temp);
++	asm volatile("isync");
++
++	return 0;
++}
++
++static __initdata struct of_device_id of_bus_ids[] = {
++	{ .compatible = "simple-bus", },
++	{},
++};
++
++static int __init declare_of_platform_devices(void)
++{
++	of_platform_bus_probe(NULL, of_bus_ids, NULL);
++
++	return 0;
++}
++machine_device_initcall(sbc8641, declare_of_platform_devices);
++
++define_machine(sbc8641) {
++	.name			= "SBC8641D",
++	.probe			= sbc8641_probe,
++	.setup_arch		= sbc8641_setup_arch,
++	.init_IRQ		= sbc8641_init_irq,
++	.show_cpuinfo		= sbc8641_show_cpuinfo,
++	.get_irq		= mpic_get_irq,
++	.restart		= fsl_rstcr_restart,
++	.time_init		= mpc86xx_time_init,
++	.calibrate_decr		= generic_calibrate_decr,
++	.progress		= udbg_progress,
++#ifdef CONFIG_PCI
++	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
++#endif
++};
+--- a/arch/powerpc/platforms/8xx/Kconfig
++++ b/arch/powerpc/platforms/8xx/Kconfig
+@@ -18,7 +18,6 @@ config MPC8XXFADS
+ config MPC86XADS
+ 	bool "MPC86XADS"
+ 	select CPM1
+-	select PPC_CPM_NEW_BINDING
+ 	help
+ 	  MPC86x Application Development System by Freescale Semiconductor.
+ 	  The MPC86xADS is meant to serve as a platform for s/w and h/w
+@@ -27,7 +26,6 @@ config MPC86XADS
+ config MPC885ADS
+ 	bool "MPC885ADS"
+ 	select CPM1
+-	select PPC_CPM_NEW_BINDING
+ 	help
+ 	  Freescale Semiconductor MPC885 Application Development System (ADS).
+ 	  Also known as DUET.
+@@ -37,7 +35,6 @@ config MPC885ADS
+ config PPC_EP88XC
+ 	bool "Embedded Planet EP88xC (a.k.a. CWH-PPC-885XN-VE)"
+ 	select CPM1
+-	select PPC_CPM_NEW_BINDING
+ 	help
+ 	  This enables support for the Embedded Planet EP88xC board.
+ 
+@@ -47,7 +44,6 @@ config PPC_EP88XC
+ config PPC_ADDER875
+ 	bool "Analogue & Micro Adder 875"
+ 	select CPM1
+-	select PPC_CPM_NEW_BINDING
+ 	select REDBOOT
+ 	help
+ 	  This enables support for the Analogue & Micro Adder 875
+--- a/arch/powerpc/platforms/8xx/m8xx_setup.c
++++ b/arch/powerpc/platforms/8xx/m8xx_setup.c
+@@ -111,17 +111,12 @@ void __init mpc8xx_calibrate_decr(void)
+ 
+ 	/* Processor frequency is MHz.
+ 	 */
+-	ppc_tb_freq = 50000000;
+-	if (!get_freq("bus-frequency", &ppc_tb_freq)) {
+-		printk(KERN_ERR "WARNING: Estimating decrementer frequency "
+-		                "(not found)\n");
+-	}
+-	ppc_tb_freq /= 16;
+ 	ppc_proc_freq = 50000000;
+ 	if (!get_freq("clock-frequency", &ppc_proc_freq))
+ 		printk(KERN_ERR "WARNING: Estimating processor frequency "
+ 		                "(not found)\n");
+ 
++	ppc_tb_freq = ppc_proc_freq / 16;
+ 	printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq);
+ 
+ 	/* Perform some more timer/timebase initialization.  This used
+--- a/arch/powerpc/platforms/Kconfig
++++ b/arch/powerpc/platforms/Kconfig
+@@ -290,13 +290,7 @@ config CPM2
+ config PPC_CPM_NEW_BINDING
+ 	bool
+ 	depends on CPM1 || CPM2
+-	help
+-	  Select this if your board has been converted to use the new
+-	  device tree bindings for CPM, and no longer needs the
+-	  ioport callbacks or the platform device glue code.
+-
+-	  The fs_enet and cpm_uart drivers will be built as
+-	  of_platform devices.
++	default y
+ 
+ config AXON_RAM
+ 	tristate "Axon DDR2 memory device driver"
+--- a/arch/powerpc/platforms/Kconfig.cputype
++++ b/arch/powerpc/platforms/Kconfig.cputype
+@@ -41,11 +41,13 @@ config 40x
+ 	bool "AMCC 40x"
+ 	select PPC_DCR_NATIVE
+ 	select PPC_UDBG_16550
++	select 4xx_SOC
+ 
+ config 44x
+ 	bool "AMCC 44x"
+ 	select PPC_DCR_NATIVE
+ 	select PPC_UDBG_16550
++	select 4xx_SOC
+ 
+ config E200
+ 	bool "Freescale e200"
+--- a/arch/powerpc/platforms/cell/iommu.c
++++ b/arch/powerpc/platforms/cell/iommu.c
+@@ -28,13 +28,13 @@
+ #include <linux/notifier.h>
+ #include <linux/of.h>
+ #include <linux/of_platform.h>
++#include <linux/lmb.h>
+ 
+ #include <asm/prom.h>
+ #include <asm/iommu.h>
+ #include <asm/machdep.h>
+ #include <asm/pci-bridge.h>
+ #include <asm/udbg.h>
+-#include <asm/lmb.h>
+ #include <asm/firmware.h>
+ #include <asm/cell-regs.h>
+ 
+@@ -316,7 +316,7 @@ static void cell_iommu_setup_stab(struct
+ 	segments = max(dbase + dsize, fbase + fsize) >> IO_SEGMENT_SHIFT;
+ 
+ 	pr_debug("%s: iommu[%d]: segments: %lu\n",
+-			__FUNCTION__, iommu->nid, segments);
++			__func__, iommu->nid, segments);
+ 
+ 	/* set up the segment table */
+ 	stab_size = segments * sizeof(unsigned long);
+@@ -343,7 +343,7 @@ static unsigned long *cell_iommu_alloc_p
+ 				(1 << 12) / sizeof(unsigned long));
+ 
+ 	ptab_size = segments * pages_per_segment * sizeof(unsigned long);
+-	pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __FUNCTION__,
++	pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __func__,
+ 			iommu->nid, ptab_size, get_order(ptab_size));
+ 	page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(ptab_size));
+ 	BUG_ON(!page);
+@@ -355,7 +355,7 @@ static unsigned long *cell_iommu_alloc_p
+ 	n_pte_pages = (pages_per_segment * sizeof(unsigned long)) >> 12;
+ 
+ 	pr_debug("%s: iommu[%d]: stab at %p, ptab at %p, n_pte_pages: %lu\n",
+-			__FUNCTION__, iommu->nid, iommu->stab, ptab,
++			__func__, iommu->nid, iommu->stab, ptab,
+ 			n_pte_pages);
+ 
+ 	/* initialise the STEs */
+@@ -394,7 +394,7 @@ static void cell_iommu_enable_hardware(s
+ 
+ 	if (cell_iommu_find_ioc(iommu->nid, &xlate_base))
+ 		panic("%s: missing IOC register mappings for node %d\n",
+-		      __FUNCTION__, iommu->nid);
++		      __func__, iommu->nid);
+ 
+ 	iommu->xlate_regs = ioremap(xlate_base, IOC_Reg_Size);
+ 	iommu->cmd_regs = iommu->xlate_regs + IOC_IOCmd_Offset;
+--- a/arch/powerpc/platforms/cell/pervasive.c
++++ b/arch/powerpc/platforms/cell/pervasive.c
+@@ -65,7 +65,7 @@ static void cbe_power_save(void)
+ 		break;
+ 	default:
+ 		printk(KERN_WARNING "%s: unknown configuration\n",
+-			__FUNCTION__);
++			__func__);
+ 		break;
+ 	}
+ 	mtspr(SPRN_TSC_CELL, thread_switch_control);
+--- a/arch/powerpc/platforms/cell/ras.c
++++ b/arch/powerpc/platforms/cell/ras.c
+@@ -132,7 +132,7 @@ static int __init cbe_ptcal_enable_on_no
+ 				(unsigned int)(addr >> 32),
+ 				(unsigned int)(addr & 0xffffffff))) {
+ 		printk(KERN_ERR "%s: error enabling PTCAL on node %d!\n",
+-				__FUNCTION__, nid);
++				__func__, nid);
+ 		goto out_free_pages;
+ 	}
+ 
+@@ -162,7 +162,7 @@ static int __init cbe_ptcal_enable(void)
+ 	if (!size)
+ 		return -ENODEV;
+ 
+-	pr_debug("%s: enabling PTCAL, size = 0x%x\n", __FUNCTION__, *size);
++	pr_debug("%s: enabling PTCAL, size = 0x%x\n", __func__, *size);
+ 	order = get_order(*size);
+ 	of_node_put(np);
+ 
+@@ -180,7 +180,7 @@ static int __init cbe_ptcal_enable(void)
+ 		const u32 *nid = of_get_property(np, "node-id", NULL);
+ 		if (!nid) {
+ 			printk(KERN_ERR "%s: node %s is missing node-id?\n",
+-					__FUNCTION__, np->full_name);
++					__func__, np->full_name);
+ 			continue;
+ 		}
+ 		cbe_ptcal_enable_on_node(*nid, order);
+@@ -195,13 +195,13 @@ static int cbe_ptcal_disable(void)
+ 	struct ptcal_area *area, *tmp;
+ 	int ret = 0;
+ 
+-	pr_debug("%s: disabling PTCAL\n", __FUNCTION__);
++	pr_debug("%s: disabling PTCAL\n", __func__);
+ 
+ 	list_for_each_entry_safe(area, tmp, &ptcal_list, list) {
+ 		/* disable ptcal on this node */
+ 		if (rtas_call(ptcal_stop_tok, 1, 1, NULL, area->nid)) {
+ 			printk(KERN_ERR "%s: error disabling PTCAL "
+-					"on node %d!\n", __FUNCTION__,
++					"on node %d!\n", __func__,
+ 					area->nid);
+ 			ret = -EIO;
+ 			continue;
+--- a/arch/powerpc/platforms/cell/spu_base.c
++++ b/arch/powerpc/platforms/cell/spu_base.c
+@@ -165,7 +165,7 @@ static int __spu_trap_data_seg(struct sp
+ 	struct spu_slb slb;
+ 	int psize;
+ 
+-	pr_debug("%s\n", __FUNCTION__);
++	pr_debug("%s\n", __func__);
+ 
+ 	slb.esid = (ea & ESID_MASK) | SLB_ESID_V;
+ 
+@@ -215,7 +215,7 @@ static int __spu_trap_data_seg(struct sp
+ extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap); //XXX
+ static int __spu_trap_data_map(struct spu *spu, unsigned long ea, u64 dsisr)
+ {
+-	pr_debug("%s, %lx, %lx\n", __FUNCTION__, dsisr, ea);
++	pr_debug("%s, %lx, %lx\n", __func__, dsisr, ea);
+ 
+ 	/* Handle kernel space hash faults immediately.
+ 	   User hash faults need to be deferred to process context. */
+@@ -351,7 +351,7 @@ spu_irq_class_1(int irq, void *data)
+ 		__spu_trap_data_seg(spu, dar);
+ 
+ 	spin_unlock(&spu->register_lock);
+-	pr_debug("%s: %lx %lx %lx %lx\n", __FUNCTION__, mask, stat,
++	pr_debug("%s: %lx %lx %lx %lx\n", __func__, mask, stat,
+ 			dar, dsisr);
+ 
+ 	if (stat & CLASS1_STORAGE_FAULT_INTR)
+@@ -726,7 +726,7 @@ static int __init init_spu_base(void)
+ 
+ 	if (ret < 0) {
+ 		printk(KERN_WARNING "%s: Error initializing spus\n",
+-			__FUNCTION__);
++			__func__);
+ 		goto out_unregister_sysdev_class;
+ 	}
+ 
+--- a/arch/powerpc/platforms/cell/spu_callbacks.c
++++ b/arch/powerpc/platforms/cell/spu_callbacks.c
+@@ -54,7 +54,7 @@ long spu_sys_callback(struct spu_syscall
+ 	long (*syscall)(u64 a1, u64 a2, u64 a3, u64 a4, u64 a5, u64 a6);
+ 
+ 	if (s->nr_ret >= ARRAY_SIZE(spu_syscall_table)) {
+-		pr_debug("%s: invalid syscall #%ld", __FUNCTION__, s->nr_ret);
++		pr_debug("%s: invalid syscall #%ld", __func__, s->nr_ret);
+ 		return -ENOSYS;
+ 	}
+ 
+--- a/arch/powerpc/platforms/cell/spu_manage.c
++++ b/arch/powerpc/platforms/cell/spu_manage.c
+@@ -92,7 +92,7 @@ static int __init spu_map_interrupts_old
+ 
+ 	tmp = of_get_property(np->parent->parent, "node-id", NULL);
+ 	if (!tmp) {
+-		printk(KERN_WARNING "%s: can't find node-id\n", __FUNCTION__);
++		printk(KERN_WARNING "%s: can't find node-id\n", __func__);
+ 		nid = spu->node;
+ 	} else
+ 		nid = tmp[0];
+@@ -296,7 +296,7 @@ static int __init of_enumerate_spus(int 
+ 		ret = fn(node);
+ 		if (ret) {
+ 			printk(KERN_WARNING "%s: Error initializing %s\n",
+-				__FUNCTION__, node->name);
++				__func__, node->name);
+ 			break;
+ 		}
+ 		n++;
+@@ -327,7 +327,7 @@ static int __init of_create_spu(struct s
+ 		if (!legacy_map) {
+ 			legacy_map = 1;
+ 			printk(KERN_WARNING "%s: Legacy device tree found, "
+-				"trying to map old style\n", __FUNCTION__);
++				"trying to map old style\n", __func__);
+ 		}
+ 		ret = spu_map_device_old(spu);
+ 		if (ret) {
+@@ -342,7 +342,7 @@ static int __init of_create_spu(struct s
+ 		if (!legacy_irq) {
+ 			legacy_irq = 1;
+ 			printk(KERN_WARNING "%s: Legacy device tree found, "
+-				"trying old style irq\n", __FUNCTION__);
++				"trying old style irq\n", __func__);
+ 		}
+ 		ret = spu_map_interrupts_old(spu, spe);
+ 		if (ret) {
+--- a/arch/powerpc/platforms/cell/spufs/coredump.c
++++ b/arch/powerpc/platforms/cell/spufs/coredump.c
+@@ -133,8 +133,6 @@ static struct spu_context *coredump_next
+ 		if (ctx->flags & SPU_CREATE_NOSCHED)
+ 			continue;
+ 
+-		/* start searching the next fd next time we're called */
+-		(*fd)++;
+ 		break;
+ 	}
+ 
+@@ -157,6 +155,9 @@ int spufs_coredump_extra_notes_size(void
+ 			break;
+ 
+ 		size += rc;
++
++		/* start searching the next fd next time */
++		fd++;
+ 	}
+ 
+ 	return size;
+@@ -239,6 +240,9 @@ int spufs_coredump_extra_notes_write(str
+ 		}
+ 
+ 		spu_release_saved(ctx);
++
++		/* start searching the next fd next time */
++		fd++;
+ 	}
+ 
+ 	return 0;
+--- a/arch/powerpc/platforms/cell/spufs/file.c
++++ b/arch/powerpc/platforms/cell/spufs/file.c
+@@ -1337,7 +1337,7 @@ static u64 spufs_signal1_type_get(struct
+ 	return ctx->ops->signal1_type_get(ctx);
+ }
+ DEFINE_SPUFS_ATTRIBUTE(spufs_signal1_type, spufs_signal1_type_get,
+-		       spufs_signal1_type_set, "%llu", SPU_ATTR_ACQUIRE);
++		       spufs_signal1_type_set, "%llu\n", SPU_ATTR_ACQUIRE);
+ 
+ 
+ static int spufs_signal2_type_set(void *data, u64 val)
+@@ -1359,7 +1359,7 @@ static u64 spufs_signal2_type_get(struct
+ 	return ctx->ops->signal2_type_get(ctx);
+ }
+ DEFINE_SPUFS_ATTRIBUTE(spufs_signal2_type, spufs_signal2_type_get,
+-		       spufs_signal2_type_set, "%llu", SPU_ATTR_ACQUIRE);
++		       spufs_signal2_type_set, "%llu\n", SPU_ATTR_ACQUIRE);
+ 
+ #if SPUFS_MMAP_4K
+ static unsigned long spufs_mss_mmap_nopfn(struct vm_area_struct *vma,
+@@ -1556,7 +1556,7 @@ void spufs_mfc_callback(struct spu *spu)
+ 
+ 	wake_up_all(&ctx->mfc_wq);
+ 
+-	pr_debug("%s %s\n", __FUNCTION__, spu->name);
++	pr_debug("%s %s\n", __func__, spu->name);
+ 	if (ctx->mfc_fasync) {
+ 		u32 free_elements, tagstatus;
+ 		unsigned int mask;
+@@ -1790,7 +1790,7 @@ static unsigned int spufs_mfc_poll(struc
+ 	if (tagstatus & ctx->tagwait)
+ 		mask |= POLLIN | POLLRDNORM;
+ 
+-	pr_debug("%s: free %d tagstatus %d tagwait %d\n", __FUNCTION__,
++	pr_debug("%s: free %d tagstatus %d tagwait %d\n", __func__,
+ 		free_elements, tagstatus, ctx->tagwait);
+ 
+ 	return mask;
+--- a/arch/powerpc/platforms/cell/spufs/run.c
++++ b/arch/powerpc/platforms/cell/spufs/run.c
+@@ -98,7 +98,7 @@ static int spu_setup_isolated(struct spu
+ 			!= MFC_CNTL_PURGE_DMA_COMPLETE) {
+ 		if (time_after(jiffies, timeout)) {
+ 			printk(KERN_ERR "%s: timeout flushing MFC DMA queue\n",
+-					__FUNCTION__);
++					__func__);
+ 			ret = -EIO;
+ 			goto out;
+ 		}
+@@ -124,7 +124,7 @@ static int spu_setup_isolated(struct spu
+ 				status_loading) {
+ 		if (time_after(jiffies, timeout)) {
+ 			printk(KERN_ERR "%s: timeout waiting for loader\n",
+-					__FUNCTION__);
++					__func__);
+ 			ret = -EIO;
+ 			goto out_drop_priv;
+ 		}
+@@ -134,7 +134,7 @@ static int spu_setup_isolated(struct spu
+ 	if (!(status & SPU_STATUS_RUNNING)) {
+ 		/* If isolated LOAD has failed: run SPU, we will get a stop-and
+ 		 * signal later. */
+-		pr_debug("%s: isolated LOAD failed\n", __FUNCTION__);
++		pr_debug("%s: isolated LOAD failed\n", __func__);
+ 		ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE);
+ 		ret = -EACCES;
+ 		goto out_drop_priv;
+@@ -142,7 +142,7 @@ static int spu_setup_isolated(struct spu
+ 
+ 	if (!(status & SPU_STATUS_ISOLATED_STATE)) {
+ 		/* This isn't allowed by the CBEA, but check anyway */
+-		pr_debug("%s: SPU fell out of isolated mode?\n", __FUNCTION__);
++		pr_debug("%s: SPU fell out of isolated mode?\n", __func__);
+ 		ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_STOP);
+ 		ret = -EINVAL;
+ 		goto out_drop_priv;
+@@ -282,7 +282,7 @@ static int spu_handle_restartsys(struct 
+ 		break;
+ 	default:
+ 		printk(KERN_WARNING "%s: unexpected return code %ld\n",
+-			__FUNCTION__, *spu_ret);
++			__func__, *spu_ret);
+ 		ret = 0;
+ 	}
+ 	return ret;
+@@ -323,6 +323,10 @@ static int spu_process_callback(struct s
+ 			return -EINTR;
+ 	}
+ 
++	/* need to re-get the ls, as it may have changed when we released the
++	 * spu */
++	ls = (void __iomem *)ctx->ops->get_ls(ctx);
++
+ 	/* write result, jump over indirect pointer */
+ 	memcpy_toio(ls + ls_pointer, &spu_ret, sizeof(spu_ret));
+ 	ctx->ops->npc_write(ctx, npc);
+--- a/arch/powerpc/platforms/cell/spufs/switch.c
++++ b/arch/powerpc/platforms/cell/spufs/switch.c
+@@ -1815,6 +1815,7 @@ static void save_csa(struct spu_state *p
+ 	save_mfc_csr_ato(prev, spu);	/* Step 24. */
+ 	save_mfc_tclass_id(prev, spu);	/* Step 25. */
+ 	set_mfc_tclass_id(prev, spu);	/* Step 26. */
++	save_mfc_cmd(prev, spu);	/* Step 26a - moved from 44. */
+ 	purge_mfc_queue(prev, spu);	/* Step 27. */
+ 	wait_purge_complete(prev, spu);	/* Step 28. */
+ 	setup_mfc_sr1(prev, spu);	/* Step 30. */
+@@ -1831,7 +1832,6 @@ static void save_csa(struct spu_state *p
+ 	save_ppuint_mb(prev, spu);	/* Step 41. */
+ 	save_ch_part1(prev, spu);	/* Step 42. */
+ 	save_spu_mb(prev, spu);	        /* Step 43. */
+-	save_mfc_cmd(prev, spu);	/* Step 44. */
+ 	reset_ch(prev, spu);	        /* Step 45. */
+ }
+ 
+--- a/arch/powerpc/platforms/celleb/beat.c
++++ b/arch/powerpc/platforms/celleb/beat.c
+@@ -48,6 +48,7 @@ void beat_power_off(void)
+ }
+ 
+ u64 beat_halt_code = 0x1000000000000000UL;
++EXPORT_SYMBOL(beat_halt_code);
+ 
+ void beat_halt(void)
+ {
+@@ -94,9 +95,8 @@ ssize_t beat_nvram_read(char *buf, size_
+ 		len = count;
+ 		if (len > BEAT_NVRW_CNT)
+ 			len = BEAT_NVRW_CNT;
+-		if (beat_eeprom_read(i, len, p)) {
++		if (beat_eeprom_read(i, len, p))
+ 			return -EIO;
+-		}
+ 
+ 		p += len;
+ 		i += len;
+@@ -121,9 +121,8 @@ ssize_t beat_nvram_write(char *buf, size
+ 		len = count;
+ 		if (len > BEAT_NVRW_CNT)
+ 			len = BEAT_NVRW_CNT;
+-		if (beat_eeprom_write(i, len, p)) {
++		if (beat_eeprom_write(i, len, p))
+ 			return -EIO;
+-		}
+ 
+ 		p += len;
+ 		i += len;
+@@ -149,13 +148,14 @@ int64_t beat_get_term_char(u64 vterm, u6
+ 	u64 db[2];
+ 	s64 ret;
+ 
+-	ret = beat_get_characters_from_console(vterm, len, (u8*)db);
++	ret = beat_get_characters_from_console(vterm, len, (u8 *)db);
+ 	if (ret == 0) {
+ 		*t1 = db[0];
+ 		*t2 = db[1];
+ 	}
+ 	return ret;
+ }
++EXPORT_SYMBOL(beat_get_term_char);
+ 
+ int64_t beat_put_term_char(u64 vterm, u64 len, u64 t1, u64 t2)
+ {
+@@ -163,8 +163,9 @@ int64_t beat_put_term_char(u64 vterm, u6
+ 
+ 	db[0] = t1;
+ 	db[1] = t2;
+-	return beat_put_characters_to_console(vterm, len, (u8*)db);
++	return beat_put_characters_to_console(vterm, len, (u8 *)db);
+ }
++EXPORT_SYMBOL(beat_put_term_char);
+ 
+ void beat_power_save(void)
+ {
+@@ -261,7 +262,3 @@ static int __init beat_event_init(void)
+ }
+ 
+ device_initcall(beat_event_init);
+-
+-EXPORT_SYMBOL(beat_get_term_char);
+-EXPORT_SYMBOL(beat_put_term_char);
+-EXPORT_SYMBOL(beat_halt_code);
+--- a/arch/powerpc/platforms/celleb/beat.h
++++ b/arch/powerpc/platforms/celleb/beat.h
+@@ -21,8 +21,8 @@
+ #ifndef _CELLEB_BEAT_H
+ #define _CELLEB_BEAT_H
+ 
+-int64_t beat_get_term_char(uint64_t,uint64_t*,uint64_t*,uint64_t*);
+-int64_t beat_put_term_char(uint64_t,uint64_t,uint64_t,uint64_t);
++int64_t beat_get_term_char(uint64_t, uint64_t *, uint64_t *, uint64_t *);
++int64_t beat_put_term_char(uint64_t, uint64_t, uint64_t, uint64_t);
+ int64_t beat_repository_encode(int, const char *, uint64_t[4]);
+ void beat_restart(char *);
+ void beat_power_off(void);
+--- a/arch/powerpc/platforms/celleb/beat_wrapper.h
++++ b/arch/powerpc/platforms/celleb/beat_wrapper.h
+@@ -197,7 +197,8 @@ static inline s64 beat_put_characters_to
+ 	u64 b[2];
+ 
+ 	memcpy(b, buffer, len);
+-	return beat_hcall_norets(HV_put_characters_to_console, termno, len,					 b[0], b[1]);
++	return beat_hcall_norets(HV_put_characters_to_console, termno, len,
++		b[0], b[1]);
+ }
+ 
+ static inline s64 beat_get_spe_privileged_state_1_registers(
+--- a/arch/powerpc/platforms/celleb/htab.c
++++ b/arch/powerpc/platforms/celleb/htab.c
+@@ -35,9 +35,9 @@
+ #include "beat_wrapper.h"
+ 
+ #ifdef DEBUG_LOW
+-#define DBG_LOW(fmt...) do { udbg_printf(fmt); } while(0)
++#define DBG_LOW(fmt...) do { udbg_printf(fmt); } while (0)
+ #else
+-#define DBG_LOW(fmt...) do { } while(0)
++#define DBG_LOW(fmt...) do { } while (0)
+ #endif
+ 
+ static DEFINE_SPINLOCK(beat_htab_lock);
+@@ -116,7 +116,8 @@ static long beat_lpar_hpte_insert(unsign
+ 		hpte_r &= ~_PAGE_COHERENT;
+ 
+ 	spin_lock(&beat_htab_lock);
+-	if ((lpar_rc = beat_read_mask(hpte_group)) == 0) {
++	lpar_rc = beat_read_mask(hpte_group);
++	if (lpar_rc == 0) {
+ 		if (!(vflags & HPTE_V_BOLTED))
+ 			DBG_LOW(" full\n");
+ 		spin_unlock(&beat_htab_lock);
+--- a/arch/powerpc/platforms/celleb/interrupt.c
++++ b/arch/powerpc/platforms/celleb/interrupt.c
+@@ -34,7 +34,7 @@ static DEFINE_SPINLOCK(beatic_irq_mask_l
+ static uint64_t	beatic_irq_mask_enable[(MAX_IRQS+255)/64];
+ static uint64_t	beatic_irq_mask_ack[(MAX_IRQS+255)/64];
+ 
+-static struct irq_host *beatic_host = NULL;
++static struct irq_host *beatic_host;
+ 
+ /*
+  * In this implementation, "virq" == "IRQ plug number",
+@@ -49,13 +49,13 @@ static inline void beatic_update_irq_mas
+ 
+ 	off = (irq_plug / 256) * 4;
+ 	masks[0] = beatic_irq_mask_enable[off + 0]
+-	           & beatic_irq_mask_ack[off + 0];
++		& beatic_irq_mask_ack[off + 0];
+ 	masks[1] = beatic_irq_mask_enable[off + 1]
+-	           & beatic_irq_mask_ack[off + 1];
++		& beatic_irq_mask_ack[off + 1];
+ 	masks[2] = beatic_irq_mask_enable[off + 2]
+-	           & beatic_irq_mask_ack[off + 2];
++		& beatic_irq_mask_ack[off + 2];
+ 	masks[3] = beatic_irq_mask_enable[off + 3]
+-	           & beatic_irq_mask_ack[off + 3];
++		& beatic_irq_mask_ack[off + 3];
+ 	if (beat_set_interrupt_mask(irq_plug&~255UL,
+ 		masks[0], masks[1], masks[2], masks[3]) != 0)
+ 		panic("Failed to set mask IRQ!");
+@@ -96,7 +96,8 @@ static void beatic_end_irq(unsigned int 
+ 	s64 err;
+ 	unsigned long flags;
+ 
+-	if ((err = beat_downcount_of_interrupt(irq_plug)) != 0) {
++	err = beat_downcount_of_interrupt(irq_plug);
++	if (err != 0) {
+ 		if ((err & 0xFFFFFFFF) != 0xFFFFFFF5) /* -11: wrong state */
+ 			panic("Failed to downcount IRQ! Error = %16lx", err);
+ 
+@@ -138,7 +139,8 @@ static int beatic_pic_host_map(struct ir
+ 	struct irq_desc *desc = get_irq_desc(virq);
+ 	int64_t	err;
+ 
+-	if ((err = beat_construct_and_connect_irq_plug(virq, hw)) < 0)
++	err = beat_construct_and_connect_irq_plug(virq, hw);
++	if (err < 0)
+ 		return -EIO;
+ 
+ 	desc->status |= IRQ_LEVEL;
+@@ -202,22 +204,22 @@ static inline unsigned int beatic_get_ir
+ 		beat_detect_pending_interrupts(i, pending);
+ 		__asm__ ("cntlzd %0,%1":"=r"(ub):
+ 			"r"(pending[0] & beatic_irq_mask_enable[i/64+0]
+-			               & beatic_irq_mask_ack[i/64+0]));
++				       & beatic_irq_mask_ack[i/64+0]));
+ 		if (ub != 64)
+ 			return i + ub + 0;
+ 		__asm__ ("cntlzd %0,%1":"=r"(ub):
+ 			"r"(pending[1] & beatic_irq_mask_enable[i/64+1]
+-			               & beatic_irq_mask_ack[i/64+1]));
++				       & beatic_irq_mask_ack[i/64+1]));
+ 		if (ub != 64)
+ 			return i + ub + 64;
+ 		__asm__ ("cntlzd %0,%1":"=r"(ub):
+ 			"r"(pending[2] & beatic_irq_mask_enable[i/64+2]
+-			               & beatic_irq_mask_ack[i/64+2]));
++				       & beatic_irq_mask_ack[i/64+2]));
+ 		if (ub != 64)
+ 			return i + ub + 128;
+ 		__asm__ ("cntlzd %0,%1":"=r"(ub):
+ 			"r"(pending[3] & beatic_irq_mask_enable[i/64+3]
+-			               & beatic_irq_mask_ack[i/64+3]));
++				       & beatic_irq_mask_ack[i/64+3]));
+ 		if (ub != 64)
+ 			return i + ub + 192;
+ 	}
+@@ -250,7 +252,7 @@ void __init beatic_init_IRQ(void)
+ 
+ 	/* Allocate an irq host */
+ 	beatic_host = irq_alloc_host(NULL, IRQ_HOST_MAP_NOMAP, 0,
+-					 &beatic_pic_host_ops,
++				     &beatic_pic_host_ops,
+ 					 0);
+ 	BUG_ON(beatic_host == NULL);
+ 	irq_set_default_host(beatic_host);
+--- a/arch/powerpc/platforms/celleb/scc_epci.c
++++ b/arch/powerpc/platforms/celleb/scc_epci.c
+@@ -161,9 +161,9 @@ static PCI_IO_ADDR celleb_epci_make_conf
+ 	if (bus != hose->bus)
+ 		addr = celleb_epci_get_epci_cfg(hose) +
+ 		       (((bus->number & 0xff) << 16)
+-		        | ((devfn & 0xff) << 8)
+-		        | (where & 0xff)
+-		        | 0x01000000);
++			| ((devfn & 0xff) << 8)
++			| (where & 0xff)
++			| 0x01000000);
+ 	else
+ 		addr = celleb_epci_get_epci_cfg(hose) +
+ 		       (((devfn & 0xff) << 8) | (where & 0xff));
+@@ -174,7 +174,7 @@ static PCI_IO_ADDR celleb_epci_make_conf
+ }
+ 
+ static int celleb_epci_read_config(struct pci_bus *bus,
+-			unsigned int devfn, int where, int size, u32 * val)
++			unsigned int devfn, int where, int size, u32 *val)
+ {
+ 	PCI_IO_ADDR epci_base;
+ 	PCI_IO_ADDR addr;
+--- a/arch/powerpc/platforms/celleb/scc_sio.c
++++ b/arch/powerpc/platforms/celleb/scc_sio.c
+@@ -28,7 +28,7 @@
+ 
+ /* sio irq0=0xb00010022 irq0=0xb00010023 irq2=0xb00010024
+     mmio=0xfff000-0x1000,0xff2000-0x1000 */
+-static int txx9_serial_bitmap __initdata = 0;
++static int txx9_serial_bitmap __initdata;
+ 
+ static struct {
+ 	uint32_t offset;
+@@ -84,7 +84,7 @@ static int __init txx9_serial_config(cha
+ 	int	i;
+ 
+ 	for (;;) {
+-		switch(get_option(&ptr, &i)) {
++		switch (get_option(&ptr, &i)) {
+ 		default:
+ 			return 0;
+ 		case 2:
+--- a/arch/powerpc/platforms/celleb/spu_priv1.c
++++ b/arch/powerpc/platforms/celleb/spu_priv1.c
+@@ -183,8 +183,7 @@ static u64 resource_allocation_enable_ge
+ 	return enable;
+ }
+ 
+-const struct spu_priv1_ops spu_priv1_beat_ops =
+-{
++const struct spu_priv1_ops spu_priv1_beat_ops = {
+ 	.int_mask_and = int_mask_and,
+ 	.int_mask_or = int_mask_or,
+ 	.int_mask_set = int_mask_set,
+--- a/arch/powerpc/platforms/celleb/udbg_beat.c
++++ b/arch/powerpc/platforms/celleb/udbg_beat.c
+@@ -54,7 +54,8 @@ static int udbg_getc_poll_beat(void)
+ 	if (inbuflen == 0) {
+ 		/* get some more chars. */
+ 		inbuflen = 0;
+-		rc = beat_get_term_char(celleb_vtermno, &inbuflen, inbuf+0, inbuf+1);
++		rc = beat_get_term_char(celleb_vtermno, &inbuflen,
++					inbuf+0, inbuf+1);
+ 		if (rc != 0)
+ 			inbuflen = 0;	/* otherwise inbuflen is garbage */
+ 	}
+@@ -78,7 +79,7 @@ static int udbg_getc_beat(void)
+ 		if (ch == -1) {
+ 			/* This shouldn't be needed...but... */
+ 			volatile unsigned long delay;
+-			for (delay=0; delay < 2000000; delay++)
++			for (delay = 0; delay < 2000000; delay++)
+ 				;
+ 		} else {
+ 			return ch;
+--- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
++++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
+@@ -117,11 +117,11 @@ static void __init mpc7448_hpc2_init_IRQ
+ 	}
+ 
+ 	if (mpic_paddr == 0) {
+-		printk("%s: No tsi108 PIC found !\n", __FUNCTION__);
++		printk("%s: No tsi108 PIC found !\n", __func__);
+ 		return;
+ 	}
+ 
+-	DBG("%s: tsi108 pic phys_addr = 0x%x\n", __FUNCTION__,
++	DBG("%s: tsi108 pic phys_addr = 0x%x\n", __func__,
+ 	    (u32) mpic_paddr);
+ 
+ 	mpic = mpic_alloc(tsi_pic, mpic_paddr,
+@@ -140,17 +140,17 @@ static void __init mpc7448_hpc2_init_IRQ
+ #ifdef CONFIG_PCI
+ 	tsi_pci = of_find_node_by_type(NULL, "pci");
+ 	if (tsi_pci == NULL) {
+-		printk("%s: No tsi108 pci node found !\n", __FUNCTION__);
++		printk("%s: No tsi108 pci node found !\n", __func__);
+ 		return;
+ 	}
+ 	cascade_node = of_find_node_by_type(NULL, "pic-router");
+ 	if (cascade_node == NULL) {
+-		printk("%s: No tsi108 pci cascade node found !\n", __FUNCTION__);
++		printk("%s: No tsi108 pci cascade node found !\n", __func__);
+ 		return;
+ 	}
+ 
+ 	cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0);
+-	DBG("%s: tsi108 cascade_pci_irq = 0x%x\n", __FUNCTION__,
++	DBG("%s: tsi108 cascade_pci_irq = 0x%x\n", __func__,
+ 	    (u32) cascade_pci_irq);
+ 	tsi108_pci_int_init(cascade_node);
+ 	set_irq_data(cascade_pci_irq, mpic);
+--- a/arch/powerpc/platforms/embedded6xx/prpmc2800.c
++++ b/arch/powerpc/platforms/embedded6xx/prpmc2800.c
+@@ -49,13 +49,13 @@ static void __init prpmc2800_setup_arch(
+ 	 * ioremap mpp and gpp registers in case they are later
+ 	 * needed by prpmc2800_reset_board().
+ 	 */
+-	np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-mpp");
++	np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-mpp");
+ 	reg = of_get_property(np, "reg", NULL);
+ 	paddr = of_translate_address(np, reg);
+ 	of_node_put(np);
+ 	mv64x60_mpp_reg_base = ioremap(paddr, reg[1]);
+ 
+-	np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-gpp");
++	np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp");
+ 	reg = of_get_property(np, "reg", NULL);
+ 	paddr = of_translate_address(np, reg);
+ 	of_node_put(np);
+--- a/arch/powerpc/platforms/iseries/exception.S
++++ b/arch/powerpc/platforms/iseries/exception.S
+@@ -38,11 +38,19 @@
+ 
+ 	.globl system_reset_iSeries
+ system_reset_iSeries:
+-	mfspr	r13,SPRN_SPRG3		/* Get paca address */
++	mfspr	r13,SPRN_SPRG3		/* Get alpaca address */
++	LOAD_REG_IMMEDIATE(r23, alpaca)
++	li	r0,ALPACA_SIZE
++	sub	r23,r13,r23
++	divdu	r23,r23,r0		/* r23 has cpu number */
++	LOAD_REG_IMMEDIATE(r13, paca)
++	mulli	r0,r23,PACA_SIZE
++	add	r13,r13,r0
++	mtspr	SPRN_SPRG3,r13		/* Save it away for the future */
+ 	mfmsr	r24
+ 	ori	r24,r24,MSR_RI
+ 	mtmsrd	r24			/* RI on */
+-	lhz	r24,PACAPACAINDEX(r13)	/* Get processor # */
++	mr	r24,r23
+ 	cmpwi	0,r24,0			/* Are we processor 0? */
+ 	bne	1f
+ 	b	.__start_initialization_iSeries	/* Start up the first processor */
+--- a/arch/powerpc/platforms/iseries/ipl_parms.h
++++ b/arch/powerpc/platforms/iseries/ipl_parms.h
+@@ -65,6 +65,4 @@ struct ItIplParmsReal {
+ 	u64	xRsvd13;		// Reserved			x38-x3F
+ };
+ 
+-extern struct ItIplParmsReal	xItIplParmsReal;
+-
+ #endif /* _ISERIES_IPL_PARMS_H */
+--- a/arch/powerpc/platforms/iseries/lpardata.c
++++ b/arch/powerpc/platforms/iseries/lpardata.c
+@@ -14,10 +14,10 @@
+ #include <asm/ptrace.h>
+ #include <asm/abs_addr.h>
+ #include <asm/lppaca.h>
+-#include <asm/iseries/it_lp_reg_save.h>
+ #include <asm/paca.h>
+ #include <asm/iseries/lpar_map.h>
+ #include <asm/iseries/it_lp_queue.h>
++#include <asm/iseries/alpaca.h>
+ 
+ #include "naca.h"
+ #include "vpd_areas.h"
+@@ -31,7 +31,7 @@
+ /* The HvReleaseData is the root of the information shared between
+  * the hypervisor and Linux.
+  */
+-struct HvReleaseData hvReleaseData = {
++const struct HvReleaseData hvReleaseData = {
+ 	.xDesc = 0xc8a5d9c4,	/* "HvRD" ebcdic */
+ 	.xSize = sizeof(struct HvReleaseData),
+ 	.xVpdAreasPtrOffset = offsetof(struct naca_struct, xItVpdAreas),
+@@ -61,6 +61,63 @@ struct naca_struct naca = {
+ 	.xRamDiskSize = 0,
+ };
+ 
++struct ItLpRegSave {
++	u32	xDesc;		// Eye catcher  "LpRS" ebcdic	000-003
++	u16	xSize;		// Size of this class		004-005
++	u8	xInUse;         // Area is live                 006-007
++	u8	xRsvd1[9];	// Reserved			007-00F
++
++	u8      xFixedRegSave[352]; // Fixed Register Save Area 010-16F
++	u32	xCTRL;		// Control Register		170-173
++	u32	xDEC;		// Decrementer			174-177
++	u32	xFPSCR;		// FP Status and Control Reg	178-17B
++	u32	xPVR;		// Processor Version Number	17C-17F
++
++	u64	xMMCR0;		// Monitor Mode Control Reg 0	180-187
++	u32	xPMC1;		// Perf Monitor Counter 1	188-18B
++	u32	xPMC2;		// Perf Monitor Counter 2	18C-18F
++	u32	xPMC3;		// Perf Monitor Counter 3	190-193
++	u32	xPMC4;		// Perf Monitor Counter 4	194-197
++	u32	xPIR;		// Processor ID Reg		198-19B
++
++	u32	xMMCR1;		// Monitor Mode Control Reg 1	19C-19F
++	u32	xMMCRA;		// Monitor Mode Control Reg A	1A0-1A3
++	u32	xPMC5;		// Perf Monitor Counter 5	1A4-1A7
++	u32	xPMC6;		// Perf Monitor Counter 6	1A8-1AB
++	u32	xPMC7;		// Perf Monitor Counter 7	1AC-1AF
++	u32	xPMC8;		// Perf Monitor Counter 8	1B0-1B3
++	u32	xTSC;		// Thread Switch Control	1B4-1B7
++	u32	xTST;		// Thread Switch Timeout	1B8-1BB
++	u32	xRsvd;          // Reserved                     1BC-1BF
++
++	u64	xACCR;		// Address Compare Control Reg	1C0-1C7
++	u64	xIMR;		// Instruction Match Register	1C8-1CF
++	u64	xSDR1;		// Storage Description Reg 1	1D0-1D7
++	u64	xSPRG0;		// Special Purpose Reg General0	1D8-1DF
++	u64	xSPRG1;		// Special Purpose Reg General1	1E0-1E7
++	u64	xSPRG2;		// Special Purpose Reg General2	1E8-1EF
++	u64	xSPRG3;		// Special Purpose Reg General3	1F0-1F7
++	u64	xTB;		// Time Base Register		1F8-1FF
++
++	u64	xFPR[32];	// Floating Point Registers	200-2FF
++
++	u64	xMSR;		// Machine State Register	300-307
++	u64	xNIA;		// Next Instruction Address	308-30F
++
++	u64	xDABR;		// Data Address Breakpoint Reg	310-317
++	u64	xIABR;		// Inst Address Breakpoint Reg	318-31F
++
++	u64	xHID0;		// HW Implementation Dependent0	320-327
++
++	u64	xHID4;		// HW Implementation Dependent4	328-32F
++	u64	xSCOMd;		// SCON Data Reg (SPRG4)	330-337
++	u64	xSCOMc;		// SCON Command Reg (SPRG5)	338-33F
++	u64	xSDAR;		// Sample Data Address Register	340-347
++	u64	xSIAR;		// Sample Inst Address Register	348-34F
++
++	u8	xRsvd3[176];	// Reserved			350-3FF
++};
++
+ extern void system_reset_iSeries(void);
+ extern void machine_check_iSeries(void);
+ extern void data_access_iSeries(void);
+@@ -129,7 +186,7 @@ struct ItLpNaca itLpNaca = {
+ };
+ 
+ /* May be filled in by the hypervisor so cannot end up in the BSS */
+-struct ItIplParmsReal xItIplParmsReal __attribute__((__section__(".data")));
++static struct ItIplParmsReal xItIplParmsReal __attribute__((__section__(".data")));
+ 
+ /* May be filled in by the hypervisor so cannot end up in the BSS */
+ struct ItExtVpdPanel xItExtVpdPanel __attribute__((__section__(".data")));
+@@ -152,13 +209,54 @@ u64    xMsVpd[3400] __attribute__((__sec
+ 
+ /* Space for Recovery Log Buffer */
+ /* May be filled in by the hypervisor so cannot end up in the BSS */
+-u64    xRecoveryLogBuffer[32] __attribute__((__section__(".data")));
++static u64    xRecoveryLogBuffer[32] __attribute__((__section__(".data")));
+ 
+-struct SpCommArea xSpCommArea = {
++static const struct SpCommArea xSpCommArea = {
+ 	.xDesc = 0xE2D7C3C2,
+ 	.xFormat = 1,
+ };
+ 
++static const struct ItLpRegSave iseries_reg_save[] = {
++	[0 ... (NR_CPUS-1)] = {
++		.xDesc = 0xd397d9e2,	/* "LpRS" */
++		.xSize = sizeof(struct ItLpRegSave),
++	},
++};
++
++#define ALPACA_INIT(number)						\
++{									\
++	.lppaca_ptr = &lppaca[number],					\
++	.reg_save_ptr = &iseries_reg_save[number],			\
++}
++
++const struct alpaca alpaca[] = {
++	ALPACA_INIT( 0),
++#if NR_CPUS > 1
++	ALPACA_INIT( 1), ALPACA_INIT( 2), ALPACA_INIT( 3),
++#if NR_CPUS > 4
++	ALPACA_INIT( 4), ALPACA_INIT( 5), ALPACA_INIT( 6), ALPACA_INIT( 7),
++#if NR_CPUS > 8
++	ALPACA_INIT( 8), ALPACA_INIT( 9), ALPACA_INIT(10), ALPACA_INIT(11),
++	ALPACA_INIT(12), ALPACA_INIT(13), ALPACA_INIT(14), ALPACA_INIT(15),
++	ALPACA_INIT(16), ALPACA_INIT(17), ALPACA_INIT(18), ALPACA_INIT(19),
++	ALPACA_INIT(20), ALPACA_INIT(21), ALPACA_INIT(22), ALPACA_INIT(23),
++	ALPACA_INIT(24), ALPACA_INIT(25), ALPACA_INIT(26), ALPACA_INIT(27),
++	ALPACA_INIT(28), ALPACA_INIT(29), ALPACA_INIT(30), ALPACA_INIT(31),
++#if NR_CPUS > 32
++	ALPACA_INIT(32), ALPACA_INIT(33), ALPACA_INIT(34), ALPACA_INIT(35),
++	ALPACA_INIT(36), ALPACA_INIT(37), ALPACA_INIT(38), ALPACA_INIT(39),
++	ALPACA_INIT(40), ALPACA_INIT(41), ALPACA_INIT(42), ALPACA_INIT(43),
++	ALPACA_INIT(44), ALPACA_INIT(45), ALPACA_INIT(46), ALPACA_INIT(47),
++	ALPACA_INIT(48), ALPACA_INIT(49), ALPACA_INIT(50), ALPACA_INIT(51),
++	ALPACA_INIT(52), ALPACA_INIT(53), ALPACA_INIT(54), ALPACA_INIT(55),
++	ALPACA_INIT(56), ALPACA_INIT(57), ALPACA_INIT(58), ALPACA_INIT(59),
++	ALPACA_INIT(60), ALPACA_INIT(61), ALPACA_INIT(62), ALPACA_INIT(63),
++#endif
++#endif
++#endif
++#endif
++};
++
+ /* The LparMap data is now located at offset 0x6000 in head.S
+  * It was put there so that the HvReleaseData could address it
+  * with a 32-bit offset as required by the iSeries hypervisor
+@@ -167,7 +265,7 @@ struct SpCommArea xSpCommArea = {
+  * the Naca via the HvReleaseData area.  The HvReleaseData has the
+  * offset into the Naca of the pointer to the ItVpdAreas.
+  */
+-struct ItVpdAreas itVpdAreas = {
++const struct ItVpdAreas itVpdAreas = {
+ 	.xSlicDesc = 0xc9a3e5c1,		/* "ItVA" */
+ 	.xSlicSize = sizeof(struct ItVpdAreas),
+ 	.xSlicVpdEntries = ItVpdMaxEntries,	/* # VPD array entries */
+@@ -185,7 +283,7 @@ struct ItVpdAreas itVpdAreas = {
+ 	.xSlicVpdLens = {			/* VPD lengths */
+ 	        0,0,0,		        /*  0 - 2 */
+ 		sizeof(xItExtVpdPanel), /*       3 Extended VPD   */
+-		sizeof(struct paca_struct),	/*       4 length of Paca  */
++		sizeof(struct alpaca),	/*       4 length of (fake) Paca  */
+ 		0,			/*       5 */
+ 		sizeof(struct ItIplParmsReal),/* 6 length of IPL parms */
+ 		26992,			/*	 7 length of MS VPD */
+@@ -203,7 +301,7 @@ struct ItVpdAreas itVpdAreas = {
+ 	.xSlicVpdAdrs = {			/* VPD addresses */
+ 		0,0,0,			/*	 0 -  2 */
+ 		&xItExtVpdPanel,        /*       3 Extended VPD */
+-		&paca[0],		/*       4 first Paca */
++		&alpaca[0],		/*       4 first (fake) Paca */
+ 		0,			/*       5 */
+ 		&xItIplParmsReal,	/*	 6 IPL parms */
+ 		&xMsVpd,		/*	 7 MS Vpd */
+@@ -219,10 +317,3 @@ struct ItVpdAreas itVpdAreas = {
+ 		0,0
+ 	}
+ };
+-
+-struct ItLpRegSave iseries_reg_save[] = {
+-	[0 ... (NR_CPUS-1)] = {
+-		.xDesc = 0xd397d9e2,	/* "LpRS" */
+-		.xSize = sizeof(struct ItLpRegSave),
+-	},
+-};
+--- a/arch/powerpc/platforms/iseries/naca.h
++++ b/arch/powerpc/platforms/iseries/naca.h
+@@ -14,7 +14,7 @@
+ 
+ struct naca_struct {
+ 	/* Kernel only data - undefined for user space */
+-	void *xItVpdAreas;              /* VPD Data                  0x00 */
++	const void *xItVpdAreas;	/* VPD Data                  0x00 */
+ 	void *xRamDisk;                 /* iSeries ramdisk           0x08 */
+ 	u64   xRamDiskSize;		/* In pages                  0x10 */
+ };
+--- a/arch/powerpc/platforms/iseries/pci.c
++++ b/arch/powerpc/platforms/iseries/pci.c
+@@ -23,6 +23,7 @@
+ 
+ #undef DEBUG
+ 
++#include <linux/jiffies.h>
+ #include <linux/kernel.h>
+ #include <linux/list.h>
+ #include <linux/string.h>
+@@ -586,7 +587,7 @@ static inline struct device_node *xlate_
+ 		static unsigned long last_jiffies;
+ 		static int num_printed;
+ 
+-		if ((jiffies - last_jiffies) > 60 * HZ) {
++		if (time_after(jiffies, last_jiffies + 60 * HZ)) {
+ 			last_jiffies = jiffies;
+ 			num_printed = 0;
+ 		}
+--- a/arch/powerpc/platforms/iseries/release_data.h
++++ b/arch/powerpc/platforms/iseries/release_data.h
+@@ -58,6 +58,6 @@ struct HvReleaseData {
+ 	char	xRsvd3[20];	/* Reserved			x2C-x3F */
+ };
+ 
+-extern struct HvReleaseData	hvReleaseData;
++extern const struct HvReleaseData	hvReleaseData;
+ 
+ #endif /* _ISERIES_RELEASE_DATA_H */
+--- a/arch/powerpc/platforms/iseries/spcomm_area.h
++++ b/arch/powerpc/platforms/iseries/spcomm_area.h
+@@ -31,6 +31,4 @@ struct SpCommArea {
+ 	u8	xRsvd2[80];		// Reserved				030-07F
+ };
+ 
+-extern struct SpCommArea xSpCommArea;
+-
+ #endif /* _ISERIES_SPCOMM_AREA_H */
+--- a/arch/powerpc/platforms/iseries/vpd_areas.h
++++ b/arch/powerpc/platforms/iseries/vpd_areas.h
+@@ -80,9 +80,9 @@ struct ItVpdAreas {
+ 	u32	xPlicDmaLens[ItDmaMaxEntries];// Array of DMA lengths	080-0A7
+ 	u32	xPlicDmaToks[ItDmaMaxEntries];// Array of DMA tokens	0A8-0CF
+ 	u32	xSlicVpdLens[ItVpdMaxEntries];// Array of VPD lengths	0D0-12F
+-	void	*xSlicVpdAdrs[ItVpdMaxEntries];// Array of VPD buffers	130-1EF
++	const void *xSlicVpdAdrs[ItVpdMaxEntries];// Array of VPD buffers 130-1EF
+ };
+ 
+-extern struct ItVpdAreas	itVpdAreas;
++extern const struct ItVpdAreas	itVpdAreas;
+ 
+ #endif /* _ISERIES_VPD_AREAS_H */
+--- a/arch/powerpc/platforms/maple/pci.c
++++ b/arch/powerpc/platforms/maple/pci.c
+@@ -592,50 +592,3 @@ int maple_pci_get_legacy_ide_irq(struct 
+ 	}
+ 	return irq;
+ }
+-
+-/* XXX: To remove once all firmwares are ok */
+-static void fixup_maple_ide(struct pci_dev* dev)
+-{
+-	if (!machine_is(maple))
+-		return;
+-
+-#if 0 /* Enable this to enable IDE port 0 */
+-	{
+-		u8 v;
+-
+-		pci_read_config_byte(dev, 0x40, &v);
+-		v |= 2;
+-		pci_write_config_byte(dev, 0x40, v);
+-	}
+-#endif
+-#if 0 /* fix bus master base */
+-	pci_write_config_dword(dev, 0x20, 0xcc01);
+-	printk("old ide resource: %lx -> %lx \n",
+-	       dev->resource[4].start, dev->resource[4].end);
+-	dev->resource[4].start = 0xcc00;
+-	dev->resource[4].end = 0xcc10;
+-#endif
+-#if 0 /* Enable this to fixup IDE sense/polarity of irqs in IO-APICs */
+-	{
+-		struct pci_dev *apicdev;
+-		u32 v;
+-
+-		apicdev = pci_get_slot (dev->bus, PCI_DEVFN(5,0));
+-		if (apicdev == NULL)
+-			printk("IDE Fixup IRQ: Can't find IO-APIC !\n");
+-		else {
+-			pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*14);
+-			pci_read_config_dword(apicdev, 0xf4, &v);
+-			v &= ~0x00000022;
+-			pci_write_config_dword(apicdev, 0xf4, v);
+-			pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*15);
+-			pci_read_config_dword(apicdev, 0xf4, &v);
+-			v &= ~0x00000022;
+-			pci_write_config_dword(apicdev, 0xf4, v);
+-			pci_dev_put(apicdev);
+-		}
+-	}
+-#endif
+-}
+-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_IDE,
+-			 fixup_maple_ide);
+--- a/arch/powerpc/platforms/maple/setup.c
++++ b/arch/powerpc/platforms/maple/setup.c
+@@ -43,6 +43,7 @@
+ #include <linux/smp.h>
+ #include <linux/bitops.h>
+ #include <linux/of_device.h>
++#include <linux/lmb.h>
+ 
+ #include <asm/processor.h>
+ #include <asm/sections.h>
+@@ -57,7 +58,6 @@
+ #include <asm/dma.h>
+ #include <asm/cputable.h>
+ #include <asm/time.h>
+-#include <asm/lmb.h>
+ #include <asm/mpic.h>
+ #include <asm/rtas.h>
+ #include <asm/udbg.h>
+@@ -319,7 +319,7 @@ static int __init maple_probe(void)
+ 	return 1;
+ }
+ 
+-define_machine(maple_md) {
++define_machine(maple) {
+ 	.name			= "Maple",
+ 	.probe			= maple_probe,
+ 	.setup_arch		= maple_setup_arch,
+--- a/arch/powerpc/platforms/pasemi/dma_lib.c
++++ b/arch/powerpc/platforms/pasemi/dma_lib.c
+@@ -17,6 +17,7 @@
+  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+  */
+ 
++#include <linux/kernel.h>
+ #include <linux/init.h>
+ #include <linux/module.h>
+ #include <linux/pci.h>
+@@ -26,6 +27,8 @@
+ 
+ #define MAX_TXCH 64
+ #define MAX_RXCH 64
++#define MAX_FLAGS 64
++#define MAX_FUN 8
+ 
+ static struct pasdma_status *dma_status;
+ 
+@@ -43,6 +46,8 @@ static struct pci_dev *dma_pdev;
+ 
+ static DECLARE_BITMAP(txch_free, MAX_TXCH);
+ static DECLARE_BITMAP(rxch_free, MAX_RXCH);
++static DECLARE_BITMAP(flags_free, MAX_FLAGS);
++static DECLARE_BITMAP(fun_free, MAX_FUN);
+ 
+ /* pasemi_read_iob_reg - read IOB register
+  * @reg: Register to read (offset into PCI CFG space)
+@@ -373,6 +378,106 @@ void pasemi_dma_free_buf(struct pasemi_d
+ }
+ EXPORT_SYMBOL(pasemi_dma_free_buf);
+ 
++/* pasemi_dma_alloc_flag - Allocate a flag (event) for channel syncronization
++ *
++ * Allocates a flag for use with channel syncronization (event descriptors).
++ * Returns allocated flag (0-63), < 0 on error.
++ */
++int pasemi_dma_alloc_flag(void)
++{
++	int bit;
++
++retry:
++	bit = find_next_bit(flags_free, MAX_FLAGS, 0);
++	if (bit >= MAX_FLAGS)
++		return -ENOSPC;
++	if (!test_and_clear_bit(bit, flags_free))
++		goto retry;
++
++	return bit;
++}
++EXPORT_SYMBOL(pasemi_dma_alloc_flag);
++
++
++/* pasemi_dma_free_flag - Deallocates a flag (event)
++ * @flag: Flag number to deallocate
++ *
++ * Frees up a flag so it can be reused for other purposes.
++ */
++void pasemi_dma_free_flag(int flag)
++{
++	BUG_ON(test_bit(flag, flags_free));
++	BUG_ON(flag >= MAX_FLAGS);
++	set_bit(flag, flags_free);
++}
++EXPORT_SYMBOL(pasemi_dma_free_flag);
++
++
++/* pasemi_dma_set_flag - Sets a flag (event) to 1
++ * @flag: Flag number to set active
++ *
++ * Sets the flag provided to 1.
++ */
++void pasemi_dma_set_flag(int flag)
++{
++	BUG_ON(flag >= MAX_FLAGS);
++	if (flag < 32)
++		pasemi_write_dma_reg(PAS_DMA_TXF_SFLG0, 1 << flag);
++	else
++		pasemi_write_dma_reg(PAS_DMA_TXF_SFLG1, 1 << flag);
++}
++EXPORT_SYMBOL(pasemi_dma_set_flag);
++
++/* pasemi_dma_clear_flag - Sets a flag (event) to 0
++ * @flag: Flag number to set inactive
++ *
++ * Sets the flag provided to 0.
++ */
++void pasemi_dma_clear_flag(int flag)
++{
++	BUG_ON(flag >= MAX_FLAGS);
++	if (flag < 32)
++		pasemi_write_dma_reg(PAS_DMA_TXF_CFLG0, 1 << flag);
++	else
++		pasemi_write_dma_reg(PAS_DMA_TXF_CFLG1, 1 << flag);
++}
++EXPORT_SYMBOL(pasemi_dma_clear_flag);
++
++/* pasemi_dma_alloc_fun - Allocate a function engine
++ *
++ * Allocates a function engine to use for crypto/checksum offload
++ * Returns allocated engine (0-8), < 0 on error.
++ */
++int pasemi_dma_alloc_fun(void)
++{
++	int bit;
++
++retry:
++	bit = find_next_bit(fun_free, MAX_FLAGS, 0);
++	if (bit >= MAX_FLAGS)
++		return -ENOSPC;
++	if (!test_and_clear_bit(bit, fun_free))
++		goto retry;
++
++	return bit;
++}
++EXPORT_SYMBOL(pasemi_dma_alloc_fun);
++
++
++/* pasemi_dma_free_fun - Deallocates a function engine
++ * @flag: Engine number to deallocate
++ *
++ * Frees up a function engine so it can be used for other purposes.
++ */
++void pasemi_dma_free_fun(int fun)
++{
++	BUG_ON(test_bit(fun, fun_free));
++	BUG_ON(fun >= MAX_FLAGS);
++	set_bit(fun, fun_free);
++}
++EXPORT_SYMBOL(pasemi_dma_free_fun);
++
++
+ static void *map_onedev(struct pci_dev *p, int index)
+ {
+ 	struct device_node *dn;
+@@ -410,6 +515,7 @@ int pasemi_dma_init(void)
+ 	struct resource res;
+ 	struct device_node *dn;
+ 	int i, intf, err = 0;
++	unsigned long timeout;
+ 	u32 tmp;
+ 
+ 	if (!machine_is(pasemi))
+@@ -478,6 +584,44 @@ int pasemi_dma_init(void)
+ 	for (i = 0; i < MAX_RXCH; i++)
+ 		__set_bit(i, rxch_free);
+ 
++	timeout = jiffies + HZ;
++	pasemi_write_dma_reg(PAS_DMA_COM_RXCMD, 0);
++	while (pasemi_read_dma_reg(PAS_DMA_COM_RXSTA) & 1) {
++		if (time_after(jiffies, timeout)) {
++			pr_warning("Warning: Could not disable RX section\n");
++			break;
++		}
++	}
++
++	timeout = jiffies + HZ;
++	pasemi_write_dma_reg(PAS_DMA_COM_TXCMD, 0);
++	while (pasemi_read_dma_reg(PAS_DMA_COM_TXSTA) & 1) {
++		if (time_after(jiffies, timeout)) {
++			pr_warning("Warning: Could not disable TX section\n");
++			break;
++		}
++	}
++
++	/* setup resource allocations for the different DMA sections */
++	tmp = pasemi_read_dma_reg(PAS_DMA_COM_CFG);
++	pasemi_write_dma_reg(PAS_DMA_COM_CFG, tmp | 0x18000000);
++
++	/* enable tx section */
++	pasemi_write_dma_reg(PAS_DMA_COM_TXCMD, PAS_DMA_COM_TXCMD_EN);
++
++	/* enable rx section */
++	pasemi_write_dma_reg(PAS_DMA_COM_RXCMD, PAS_DMA_COM_RXCMD_EN);
++
++	for (i = 0; i < MAX_FLAGS; i++)
++		__set_bit(i, flags_free);
++
++	for (i = 0; i < MAX_FUN; i++)
++		__set_bit(i, fun_free);
++
++	/* clear all status flags */
++	pasemi_write_dma_reg(PAS_DMA_TXF_CFLG0, 0xffffffff);
++	pasemi_write_dma_reg(PAS_DMA_TXF_CFLG1, 0xffffffff);
++
+ 	printk(KERN_INFO "PA Semi PWRficient DMA library initialized "
+ 		"(%d tx, %d rx channels)\n", num_txch, num_rxch);
+ 
+--- a/arch/powerpc/platforms/pasemi/iommu.c
++++ b/arch/powerpc/platforms/pasemi/iommu.c
+@@ -1,5 +1,5 @@
+ /*
+- * Copyright (C) 2005-2007, PA Semi, Inc
++ * Copyright (C) 2005-2008, PA Semi, Inc
+  *
+  * Maintained by: Olof Johansson <olof@lixom.net>
+  *
+@@ -27,7 +27,6 @@
+ #include <asm/abs_addr.h>
+ #include <asm/firmware.h>
+ 
+-
+ #define IOBMAP_PAGE_SHIFT	12
+ #define IOBMAP_PAGE_SIZE	(1 << IOBMAP_PAGE_SHIFT)
+ #define IOBMAP_PAGE_MASK	(IOBMAP_PAGE_SIZE - 1)
+@@ -35,13 +34,13 @@
+ #define IOB_BASE		0xe0000000
+ #define IOB_SIZE		0x3000
+ /* Configuration registers */
+-#define IOBCAP_REG		0x10
+-#define IOBCOM_REG		0x40
++#define IOBCAP_REG		0x40
++#define IOBCOM_REG		0x100
+ /* Enable IOB address translation */
+ #define IOBCOM_ATEN		0x00000100
+ 
+ /* Address decode configuration register */
+-#define IOB_AD_REG		0x53
++#define IOB_AD_REG		0x14c
+ /* IOBCOM_AD_REG fields */
+ #define IOB_AD_VGPRT		0x00000e00
+ #define IOB_AD_VGAEN		0x00000100
+@@ -56,13 +55,13 @@
+ #define IOB_AD_TRNG_2G		0x00000001
+ #define IOB_AD_TRNG_128G	0x00000003
+ 
+-#define IOB_TABLEBASE_REG	0x55
++#define IOB_TABLEBASE_REG	0x154
+ 
+ /* Base of the 64 4-byte L1 registers */
+-#define IOB_XLT_L1_REGBASE	0xac0
++#define IOB_XLT_L1_REGBASE	0x2b00
+ 
+ /* Register to invalidate TLB entries */
+-#define IOB_AT_INVAL_TLB_REG	0xb40
++#define IOB_AT_INVAL_TLB_REG	0x2d00
+ 
+ /* The top two bits of the level 1 entry contains valid and type flags */
+ #define IOBMAP_L1E_V		0x40000000
+@@ -76,7 +75,7 @@
+ #define IOBMAP_L2E_V		0x80000000
+ #define IOBMAP_L2E_V_CACHED	0xc0000000
+ 
+-static u32 __iomem *iob;
++static void __iomem *iob;
+ static u32 iob_l1_emptyval;
+ static u32 iob_l2_emptyval;
+ static u32 *iob_l2_base;
+@@ -219,7 +218,7 @@ int __init iob_init(struct device_node *
+ 	for (i = 0; i < 64; i++) {
+ 		/* Each L1 covers 32MB, i.e. 8K entries = 32K of ram */
+ 		regword = IOBMAP_L1E_V | (__pa(iob_l2_base + i*0x2000) >> 12);
+-		out_le32(iob+IOB_XLT_L1_REGBASE+i, regword);
++		out_le32(iob+IOB_XLT_L1_REGBASE+i*4, regword);
+ 	}
+ 
+ 	/* set 2GB translation window, based at 0 */
+--- a/arch/powerpc/platforms/powermac/setup.c
++++ b/arch/powerpc/platforms/powermac/setup.c
+@@ -53,6 +53,7 @@
+ #include <linux/suspend.h>
+ #include <linux/of_device.h>
+ #include <linux/of_platform.h>
++#include <linux/lmb.h>
+ 
+ #include <asm/reg.h>
+ #include <asm/sections.h>
+@@ -74,7 +75,6 @@
+ #include <asm/iommu.h>
+ #include <asm/smu.h>
+ #include <asm/pmc.h>
+-#include <asm/lmb.h>
+ #include <asm/udbg.h>
+ 
+ #include "pmac.h"
+--- a/arch/powerpc/platforms/ps3/device-init.c
++++ b/arch/powerpc/platforms/ps3/device-init.c
+@@ -499,41 +499,14 @@ static int __init ps3_register_graphics_
+ }
+ 
+ /**
+- * ps3_register_repository_device - Register a device from the repositiory info.
+- *
++ * ps3_setup_dynamic_device - Setup a dynamic device from the repository
+  */
+ 
+-static int ps3_register_repository_device(
+-	const struct ps3_repository_device *repo)
++static int ps3_setup_dynamic_device(const struct ps3_repository_device *repo)
+ {
+ 	int result;
+ 
+ 	switch (repo->dev_type) {
+-	case PS3_DEV_TYPE_SB_GELIC:
+-		result = ps3_setup_gelic_device(repo);
+-		if (result) {
+-			pr_debug("%s:%d ps3_setup_gelic_device failed\n",
+-				__func__, __LINE__);
+-		}
+-		break;
+-	case PS3_DEV_TYPE_SB_USB:
+-
+-		/* Each USB device has both an EHCI and an OHCI HC */
+-
+-		result = ps3_setup_ehci_device(repo);
+-
+-		if (result) {
+-			pr_debug("%s:%d ps3_setup_ehci_device failed\n",
+-				__func__, __LINE__);
+-		}
+-
+-		result = ps3_setup_ohci_device(repo);
+-
+-		if (result) {
+-			pr_debug("%s:%d ps3_setup_ohci_device failed\n",
+-				__func__, __LINE__);
+-		}
+-		break;
+ 	case PS3_DEV_TYPE_STOR_DISK:
+ 		result = ps3_setup_storage_dev(repo, PS3_MATCH_ID_STOR_DISK);
+ 
+@@ -572,6 +545,48 @@ static int ps3_register_repository_devic
+ 	return result;
+ }
+ 
++/**
++ * ps3_setup_static_device - Setup a static device from the repository
++ */
++
++static int __init ps3_setup_static_device(const struct ps3_repository_device *repo)
++{
++	int result;
++
++	switch (repo->dev_type) {
++	case PS3_DEV_TYPE_SB_GELIC:
++		result = ps3_setup_gelic_device(repo);
++		if (result) {
++			pr_debug("%s:%d ps3_setup_gelic_device failed\n",
++				__func__, __LINE__);
++		}
++		break;
++	case PS3_DEV_TYPE_SB_USB:
++
++		/* Each USB device has both an EHCI and an OHCI HC */
++
++		result = ps3_setup_ehci_device(repo);
++
++		if (result) {
++			pr_debug("%s:%d ps3_setup_ehci_device failed\n",
++				__func__, __LINE__);
++		}
++
++		result = ps3_setup_ohci_device(repo);
++
++		if (result) {
++			pr_debug("%s:%d ps3_setup_ohci_device failed\n",
++				__func__, __LINE__);
++		}
++		break;
++
++	default:
++		return ps3_setup_dynamic_device(repo);
++	}
++
++	return result;
++}
++
+ static void ps3_find_and_add_device(u64 bus_id, u64 dev_id)
+ {
+ 	struct ps3_repository_device repo;
+@@ -601,7 +616,7 @@ found:
+ 		pr_debug("%s:%u: device %lu:%lu found after %u retries\n",
+ 			 __func__, __LINE__, bus_id, dev_id, retries);
+ 
+-	ps3_register_repository_device(&repo);
++	ps3_setup_dynamic_device(&repo);
+ 	return;
+ }
+ 
+@@ -905,8 +920,7 @@ static int __init ps3_register_devices(v
+ 
+ 	ps3_register_graphics_devices();
+ 
+-	ps3_repository_find_devices(PS3_BUS_TYPE_SB,
+-		ps3_register_repository_device);
++	ps3_repository_find_devices(PS3_BUS_TYPE_SB, ps3_setup_static_device);
+ 
+ 	ps3_register_sound_devices();
+ 
+--- a/arch/powerpc/platforms/ps3/htab.c
++++ b/arch/powerpc/platforms/ps3/htab.c
+@@ -19,9 +19,10 @@
+  */
+ 
+ #include <linux/kernel.h>
++#include <linux/lmb.h>
+ 
+ #include <asm/machdep.h>
+-#include <asm/lmb.h>
++#include <asm/prom.h>
+ #include <asm/udbg.h>
+ #include <asm/lv1call.h>
+ #include <asm/ps3fb.h>
+--- a/arch/powerpc/platforms/ps3/interrupt.c
++++ b/arch/powerpc/platforms/ps3/interrupt.c
+@@ -709,7 +709,7 @@ static unsigned int ps3_get_irq(void)
+ 	asm volatile("cntlzd %0,%1" : "=r" (plug) : "r" (x));
+ 	plug &= 0x3f;
+ 
+-	if (unlikely(plug) == NO_IRQ) {
++	if (unlikely(plug == NO_IRQ)) {
+ 		pr_debug("%s:%d: no plug found: thread_id %lu\n", __func__,
+ 			__LINE__, pd->thread_id);
+ 		dump_bmp(&per_cpu(ps3_private, 0));
+--- a/arch/powerpc/platforms/ps3/mm.c
++++ b/arch/powerpc/platforms/ps3/mm.c
+@@ -21,9 +21,10 @@
+ #include <linux/kernel.h>
+ #include <linux/module.h>
+ #include <linux/memory_hotplug.h>
++#include <linux/lmb.h>
+ 
+ #include <asm/firmware.h>
+-#include <asm/lmb.h>
++#include <asm/prom.h>
+ #include <asm/udbg.h>
+ #include <asm/lv1call.h>
+ 
+--- a/arch/powerpc/platforms/ps3/os-area.c
++++ b/arch/powerpc/platforms/ps3/os-area.c
+@@ -24,8 +24,9 @@
+ #include <linux/fs.h>
+ #include <linux/syscalls.h>
+ #include <linux/ctype.h>
++#include <linux/lmb.h>
+ 
+-#include <asm/lmb.h>
++#include <asm/prom.h>
+ 
+ #include "platform.h"
+ 
+--- a/arch/powerpc/platforms/ps3/setup.c
++++ b/arch/powerpc/platforms/ps3/setup.c
+@@ -95,6 +95,14 @@ static void ps3_power_off(void)
+ 	ps3_sys_manager_power_off(); /* never returns */
+ }
+ 
++static void ps3_halt(void)
++{
++	DBG("%s:%d\n", __func__, __LINE__);
++
++	smp_send_stop();
++	ps3_sys_manager_halt(); /* never returns */
++}
++
+ static void ps3_panic(char *str)
+ {
+ 	DBG("%s:%d %s\n", __func__, __LINE__, str);
+@@ -105,7 +113,8 @@ static void ps3_panic(char *str)
+ 	printk("   Please press POWER button.\n");
+ 	printk("\n");
+ 
+-	while(1);
++	while(1)
++		lv1_pause(1);
+ }
+ 
+ #if defined(CONFIG_FB_PS3) || defined(CONFIG_FB_PS3_MODULE) || \
+@@ -117,7 +126,7 @@ static void __init prealloc(struct ps3_p
+ 
+ 	p->address = __alloc_bootmem(p->size, p->align, __pa(MAX_DMA_ADDRESS));
+ 	if (!p->address) {
+-		printk(KERN_ERR "%s: Cannot allocate %s\n", __FUNCTION__,
++		printk(KERN_ERR "%s: Cannot allocate %s\n", __func__,
+ 		       p->name);
+ 		return;
+ 	}
+@@ -266,6 +275,7 @@ define_machine(ps3) {
+ 	.progress			= ps3_progress,
+ 	.restart			= ps3_restart,
+ 	.power_off			= ps3_power_off,
++	.halt				= ps3_halt,
+ #if defined(CONFIG_KEXEC)
+ 	.kexec_cpu_down			= ps3_kexec_cpu_down,
+ 	.machine_kexec			= default_machine_kexec,
+--- a/arch/powerpc/platforms/ps3/spu.c
++++ b/arch/powerpc/platforms/ps3/spu.c
+@@ -27,6 +27,7 @@
+ #include <asm/spu.h>
+ #include <asm/spu_priv1.h>
+ #include <asm/lv1call.h>
++#include <asm/ps3.h>
+ 
+ #include "../cell/spufs/spufs.h"
+ #include "platform.h"
+@@ -140,6 +141,12 @@ static void _dump_areas(unsigned int spe
+ 	pr_debug("%s:%d: shadow:  %lxh\n", func, line, shadow);
+ }
+ 
++inline u64 ps3_get_spe_id(void *arg)
++{
++	return spu_pdata(arg)->spe_id;
++}
++EXPORT_SYMBOL_GPL(ps3_get_spe_id);
++
+ static unsigned long get_vas_id(void)
+ {
+ 	unsigned long id;
+--- a/arch/powerpc/platforms/pseries/Makefile
++++ b/arch/powerpc/platforms/pseries/Makefile
+@@ -18,3 +18,4 @@ obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug-cpu
+ obj-$(CONFIG_HVC_CONSOLE)	+= hvconsole.o
+ obj-$(CONFIG_HVCS)		+= hvcserver.o
+ obj-$(CONFIG_HCALL_STATS)	+= hvCall_inst.o
++obj-$(CONFIG_PHYP_DUMP)	+= phyp_dump.o
+--- a/arch/powerpc/platforms/pseries/eeh.c
++++ b/arch/powerpc/platforms/pseries/eeh.c
+@@ -945,7 +945,6 @@ static void *early_enable_eeh(struct dev
+ 	unsigned int rets[3];
+ 	struct eeh_early_enable_info *info = data;
+ 	int ret;
+-	const char *status = of_get_property(dn, "status", NULL);
+ 	const u32 *class_code = of_get_property(dn, "class-code", NULL);
+ 	const u32 *vendor_id = of_get_property(dn, "vendor-id", NULL);
+ 	const u32 *device_id = of_get_property(dn, "device-id", NULL);
+@@ -959,8 +958,8 @@ static void *early_enable_eeh(struct dev
+ 	pdn->eeh_freeze_count = 0;
+ 	pdn->eeh_false_positives = 0;
+ 
+-	if (status && strncmp(status, "ok", 2) != 0)
+-		return NULL;	/* ignore devices with bad status */
++	if (!of_device_is_available(dn))
++		return NULL;
+ 
+ 	/* Ignore bad nodes. */
+ 	if (!class_code || !vendor_id || !device_id)
+--- a/arch/powerpc/platforms/pseries/lpar.c
++++ b/arch/powerpc/platforms/pseries/lpar.c
+@@ -40,6 +40,7 @@
+ #include <asm/smp.h>
+ 
+ #include "plpar_wrappers.h"
++#include "pseries.h"
+ 
+ #ifdef DEBUG_LOW
+ #define DBG_LOW(fmt...) do { udbg_printf(fmt); } while(0)
+@@ -203,7 +204,6 @@ void __init find_udbg_vterm(void)
+ 	struct device_node *stdout_node;
+ 	const u32 *termno;
+ 	const char *name;
+-	int add_console;
+ 
+ 	/* find the boot console from /chosen/stdout */
+ 	if (!of_chosen)
+@@ -219,8 +219,6 @@ void __init find_udbg_vterm(void)
+ 		printk(KERN_WARNING "stdout node missing 'name' property!\n");
+ 		goto out;
+ 	}
+-	/* The user has requested a console so this is already set up. */
+-	add_console = !strstr(cmd_line, "console=");
+ 
+ 	/* Check if it's a virtual terminal */
+ 	if (strncmp(name, "vty", 3) != 0)
+@@ -234,15 +232,13 @@ void __init find_udbg_vterm(void)
+ 		udbg_putc = udbg_putcLP;
+ 		udbg_getc = udbg_getcLP;
+ 		udbg_getc_poll = udbg_getc_pollLP;
+-		if (add_console)
+-			add_preferred_console("hvc", termno[0] & 0xff, NULL);
++		add_preferred_console("hvc", termno[0] & 0xff, NULL);
+ 	} else if (of_device_is_compatible(stdout_node, "hvterm-protocol")) {
+ 		vtermno = termno[0];
+ 		udbg_putc = udbg_hvsi_putc;
+ 		udbg_getc = udbg_hvsi_getc;
+ 		udbg_getc_poll = udbg_hvsi_getc_poll;
+-		if (add_console)
+-			add_preferred_console("hvsi", termno[0] & 0xff, NULL);
++		add_preferred_console("hvsi", termno[0] & 0xff, NULL);
+ 	}
+ out:
+ 	of_node_put(stdout_node);
+@@ -520,6 +516,20 @@ static void pSeries_lpar_hpte_invalidate
+ 	BUG_ON(lpar_rc != H_SUCCESS);
+ }
+ 
++static void pSeries_lpar_hpte_removebolted(unsigned long ea,
++					   int psize, int ssize)
++{
++	unsigned long slot, vsid, va;
++
++	vsid = get_kernel_vsid(ea, ssize);
++	va = hpt_va(ea, vsid, ssize);
++
++	slot = pSeries_lpar_hpte_find(va, psize, ssize);
++	BUG_ON(slot == -1);
++
++	pSeries_lpar_hpte_invalidate(slot, va, psize, ssize, 0);
++}
++
+ /* Flag bits for H_BULK_REMOVE */
+ #define HBR_REQUEST	0x4000000000000000UL
+ #define HBR_RESPONSE	0x8000000000000000UL
+@@ -597,6 +607,7 @@ void __init hpte_init_lpar(void)
+ 	ppc_md.hpte_updateboltedpp = pSeries_lpar_hpte_updateboltedpp;
+ 	ppc_md.hpte_insert	= pSeries_lpar_hpte_insert;
+ 	ppc_md.hpte_remove	= pSeries_lpar_hpte_remove;
++	ppc_md.hpte_removebolted = pSeries_lpar_hpte_removebolted;
+ 	ppc_md.flush_hash_range	= pSeries_lpar_flush_hash_range;
+ 	ppc_md.hpte_clear_all   = pSeries_lpar_hptab_clear;
+ }
+--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
++++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
+@@ -123,7 +123,7 @@ pcibios_pci_config_bridge(struct pci_dev
+ 	/* Add to children of PCI bridge dev->bus */
+ 	child_bus = pci_add_new_bus(dev->bus, dev, sec_busno);
+ 	if (!child_bus) {
+-		printk (KERN_ERR "%s: could not add second bus\n", __FUNCTION__);
++		printk (KERN_ERR "%s: could not add second bus\n", __func__);
+ 		return -EIO;
+ 	}
+ 	sprintf(child_bus->name, "PCI Bus #%02x", child_bus->number);
+--- /dev/null
++++ b/arch/powerpc/platforms/pseries/phyp_dump.c
+@@ -0,0 +1,507 @@
++/*
++ * Hypervisor-assisted dump
++ *
++ * Linas Vepstas, Manish Ahuja 2008
++ * Copyright 2008 IBM Corp.
++ *
++ *      This program is free software; you can redistribute it and/or
++ *      modify it under the terms of the GNU General Public License
++ *      as published by the Free Software Foundation; either version
++ *      2 of the License, or (at your option) any later version.
++ *
++ */
++
++#include <linux/init.h>
++#include <linux/kobject.h>
++#include <linux/mm.h>
++#include <linux/of.h>
++#include <linux/pfn.h>
++#include <linux/swap.h>
++#include <linux/sysfs.h>
++
++#include <asm/page.h>
++#include <asm/phyp_dump.h>
++#include <asm/machdep.h>
++#include <asm/prom.h>
++#include <asm/rtas.h>
++
++/* Variables, used to communicate data between early boot and late boot */
++static struct phyp_dump phyp_dump_vars;
++struct phyp_dump *phyp_dump_info = &phyp_dump_vars;
++
++static int ibm_configure_kernel_dump;
++/* ------------------------------------------------- */
++/* RTAS interfaces to declare the dump regions */
++
++struct dump_section {
++	u32 dump_flags;
++	u16 source_type;
++	u16 error_flags;
++	u64 source_address;
++	u64 source_length;
++	u64 length_copied;
++	u64 destination_address;
++};
++
++struct phyp_dump_header {
++	u32 version;
++	u16 num_of_sections;
++	u16 status;
++
++	u32 first_offset_section;
++	u32 dump_disk_section;
++	u64 block_num_dd;
++	u64 num_of_blocks_dd;
++	u32 offset_dd;
++	u32 maxtime_to_auto;
++	/* No dump disk path string used */
++
++	struct dump_section cpu_data;
++	struct dump_section hpte_data;
++	struct dump_section kernel_data;
++};
++
++/* The dump header *must be* in low memory, so .bss it */
++static struct phyp_dump_header phdr;
++
++#define NUM_DUMP_SECTIONS	3
++#define DUMP_HEADER_VERSION	0x1
++#define DUMP_REQUEST_FLAG	0x1
++#define DUMP_SOURCE_CPU		0x0001
++#define DUMP_SOURCE_HPTE	0x0002
++#define DUMP_SOURCE_RMO		0x0011
++#define DUMP_ERROR_FLAG		0x2000
++#define DUMP_TRIGGERED		0x4000
++#define DUMP_PERFORMED		0x8000
++
++
++/**
++ * init_dump_header() - initialize the header declaring a dump
++ * Returns: length of dump save area.
++ *
++ * When the hypervisor saves crashed state, it needs to put
++ * it somewhere. The dump header tells the hypervisor where
++ * the data can be saved.
++ */
++static unsigned long init_dump_header(struct phyp_dump_header *ph)
++{
++	unsigned long addr_offset = 0;
++
++	/* Set up the dump header */
++	ph->version = DUMP_HEADER_VERSION;
++	ph->num_of_sections = NUM_DUMP_SECTIONS;
++	ph->status = 0;
++
++	ph->first_offset_section =
++		(u32)offsetof(struct phyp_dump_header, cpu_data);
++	ph->dump_disk_section = 0;
++	ph->block_num_dd = 0;
++	ph->num_of_blocks_dd = 0;
++	ph->offset_dd = 0;
++
++	ph->maxtime_to_auto = 0; /* disabled */
++
++	/* The first two sections are mandatory */
++	ph->cpu_data.dump_flags = DUMP_REQUEST_FLAG;
++	ph->cpu_data.source_type = DUMP_SOURCE_CPU;
++	ph->cpu_data.source_address = 0;
++	ph->cpu_data.source_length = phyp_dump_info->cpu_state_size;
++	ph->cpu_data.destination_address = addr_offset;
++	addr_offset += phyp_dump_info->cpu_state_size;
++
++	ph->hpte_data.dump_flags = DUMP_REQUEST_FLAG;
++	ph->hpte_data.source_type = DUMP_SOURCE_HPTE;
++	ph->hpte_data.source_address = 0;
++	ph->hpte_data.source_length = phyp_dump_info->hpte_region_size;
++	ph->hpte_data.destination_address = addr_offset;
++	addr_offset += phyp_dump_info->hpte_region_size;
++
++	/* This section describes the low kernel region */
++	ph->kernel_data.dump_flags = DUMP_REQUEST_FLAG;
++	ph->kernel_data.source_type = DUMP_SOURCE_RMO;
++	ph->kernel_data.source_address = PHYP_DUMP_RMR_START;
++	ph->kernel_data.source_length = PHYP_DUMP_RMR_END;
++	ph->kernel_data.destination_address = addr_offset;
++	addr_offset += ph->kernel_data.source_length;
++
++	return addr_offset;
++}
++
++static void print_dump_header(const struct phyp_dump_header *ph)
++{
++#ifdef DEBUG
++	printk(KERN_INFO "dump header:\n");
++	/* setup some ph->sections required */
++	printk(KERN_INFO "version = %d\n", ph->version);
++	printk(KERN_INFO "Sections = %d\n", ph->num_of_sections);
++	printk(KERN_INFO "Status = 0x%x\n", ph->status);
++
++	/* No ph->disk, so all should be set to 0 */
++	printk(KERN_INFO "Offset to first section 0x%x\n",
++		ph->first_offset_section);
++	printk(KERN_INFO "dump disk sections should be zero\n");
++	printk(KERN_INFO "dump disk section = %d\n", ph->dump_disk_section);
++	printk(KERN_INFO "block num = %ld\n", ph->block_num_dd);
++	printk(KERN_INFO "number of blocks = %ld\n", ph->num_of_blocks_dd);
++	printk(KERN_INFO "dump disk offset = %d\n", ph->offset_dd);
++	printk(KERN_INFO "Max auto time= %d\n", ph->maxtime_to_auto);
++
++	/*set cpu state and hpte states as well scratch pad area */
++	printk(KERN_INFO " CPU AREA \n");
++	printk(KERN_INFO "cpu dump_flags =%d\n", ph->cpu_data.dump_flags);
++	printk(KERN_INFO "cpu source_type =%d\n", ph->cpu_data.source_type);
++	printk(KERN_INFO "cpu error_flags =%d\n", ph->cpu_data.error_flags);
++	printk(KERN_INFO "cpu source_address =%lx\n",
++		ph->cpu_data.source_address);
++	printk(KERN_INFO "cpu source_length =%lx\n",
++		ph->cpu_data.source_length);
++	printk(KERN_INFO "cpu length_copied =%lx\n",
++		ph->cpu_data.length_copied);
++
++	printk(KERN_INFO " HPTE AREA \n");
++	printk(KERN_INFO "HPTE dump_flags =%d\n", ph->hpte_data.dump_flags);
++	printk(KERN_INFO "HPTE source_type =%d\n", ph->hpte_data.source_type);
++	printk(KERN_INFO "HPTE error_flags =%d\n", ph->hpte_data.error_flags);
++	printk(KERN_INFO "HPTE source_address =%lx\n",
++		ph->hpte_data.source_address);
++	printk(KERN_INFO "HPTE source_length =%lx\n",
++		ph->hpte_data.source_length);
++	printk(KERN_INFO "HPTE length_copied =%lx\n",
++		ph->hpte_data.length_copied);
++
++	printk(KERN_INFO " SRSD AREA \n");
++	printk(KERN_INFO "SRSD dump_flags =%d\n", ph->kernel_data.dump_flags);
++	printk(KERN_INFO "SRSD source_type =%d\n", ph->kernel_data.source_type);
++	printk(KERN_INFO "SRSD error_flags =%d\n", ph->kernel_data.error_flags);
++	printk(KERN_INFO "SRSD source_address =%lx\n",
++		ph->kernel_data.source_address);
++	printk(KERN_INFO "SRSD source_length =%lx\n",
++		ph->kernel_data.source_length);
++	printk(KERN_INFO "SRSD length_copied =%lx\n",
++		ph->kernel_data.length_copied);
++#endif
++}
++
++static ssize_t show_phyp_dump_active(struct kobject *kobj,
++			struct kobj_attribute *attr, char *buf)
++{
++
++	/* create filesystem entry so kdump is phyp-dump aware */
++	return sprintf(buf, "%lx\n", phyp_dump_info->phyp_dump_at_boot);
++}
++
++static struct kobj_attribute pdl = __ATTR(phyp_dump_active, 0600,
++					show_phyp_dump_active,
++					NULL);
++
++static void register_dump_area(struct phyp_dump_header *ph, unsigned long addr)
++{
++	int rc;
++
++	/* Add addr value if not initialized before */
++	if (ph->cpu_data.destination_address == 0) {
++		ph->cpu_data.destination_address += addr;
++		ph->hpte_data.destination_address += addr;
++		ph->kernel_data.destination_address += addr;
++	}
++
++	/* ToDo Invalidate kdump and free memory range. */
++
++	do {
++		rc = rtas_call(ibm_configure_kernel_dump, 3, 1, NULL,
++				1, ph, sizeof(struct phyp_dump_header));
++	} while (rtas_busy_delay(rc));
++
++	if (rc) {
++		printk(KERN_ERR "phyp-dump: unexpected error (%d) on "
++						"register\n", rc);
++		print_dump_header(ph);
++		return;
++	}
++
++	rc = sysfs_create_file(kernel_kobj, &pdl.attr);
++	if (rc)
++		printk(KERN_ERR "phyp-dump: unable to create sysfs"
++				" file (%d)\n", rc);
++}
++
++static
++void invalidate_last_dump(struct phyp_dump_header *ph, unsigned long addr)
++{
++	int rc;
++
++	/* Add addr value if not initialized before */
++	if (ph->cpu_data.destination_address == 0) {
++		ph->cpu_data.destination_address += addr;
++		ph->hpte_data.destination_address += addr;
++		ph->kernel_data.destination_address += addr;
++	}
++
++	do {
++		rc = rtas_call(ibm_configure_kernel_dump, 3, 1, NULL,
++				2, ph, sizeof(struct phyp_dump_header));
++	} while (rtas_busy_delay(rc));
++
++	if (rc) {
++		printk(KERN_ERR "phyp-dump: unexpected error (%d) "
++						"on invalidate\n", rc);
++		print_dump_header(ph);
++	}
++}
++
++/* ------------------------------------------------- */
++/**
++ * release_memory_range -- release memory previously lmb_reserved
++ * @start_pfn: starting physical frame number
++ * @nr_pages: number of pages to free.
++ *
++ * This routine will release memory that had been previously
++ * lmb_reserved in early boot. The released memory becomes
++ * available for genreal use.
++ */
++static void release_memory_range(unsigned long start_pfn,
++			unsigned long nr_pages)
++{
++	struct page *rpage;
++	unsigned long end_pfn;
++	long i;
++
++	end_pfn = start_pfn + nr_pages;
++
++	for (i = start_pfn; i <= end_pfn; i++) {
++		rpage = pfn_to_page(i);
++		if (PageReserved(rpage)) {
++			ClearPageReserved(rpage);
++			init_page_count(rpage);
++			__free_page(rpage);
++			totalram_pages++;
++		}
++	}
++}
++
++/**
++ * track_freed_range -- Counts the range being freed.
++ * Once the counter goes to zero, it re-registers dump for
++ * future use.
++ */
++static void
++track_freed_range(unsigned long addr, unsigned long length)
++{
++	static unsigned long scratch_area_size, reserved_area_size;
++
++	if (addr < phyp_dump_info->init_reserve_start)
++		return;
++
++	if ((addr >= phyp_dump_info->init_reserve_start) &&
++	    (addr <= phyp_dump_info->init_reserve_start +
++	     phyp_dump_info->init_reserve_size))
++		reserved_area_size += length;
++
++	if ((addr >= phyp_dump_info->reserved_scratch_addr) &&
++	    (addr <= phyp_dump_info->reserved_scratch_addr +
++	     phyp_dump_info->reserved_scratch_size))
++		scratch_area_size += length;
++
++	if ((reserved_area_size == phyp_dump_info->init_reserve_size) &&
++	    (scratch_area_size == phyp_dump_info->reserved_scratch_size)) {
++
++		invalidate_last_dump(&phdr,
++				phyp_dump_info->reserved_scratch_addr);
++		register_dump_area(&phdr,
++				phyp_dump_info->reserved_scratch_addr);
++	}
++}
++
++/* ------------------------------------------------- */
++/**
++ * sysfs_release_region -- sysfs interface to release memory range.
++ *
++ * Usage:
++ *   "echo <start addr> <length> > /sys/kernel/release_region"
++ *
++ * Example:
++ *   "echo 0x40000000 0x10000000 > /sys/kernel/release_region"
++ *
++ * will release 256MB starting at 1GB.
++ */
++static ssize_t store_release_region(struct kobject *kobj,
++				struct kobj_attribute *attr,
++				const char *buf, size_t count)
++{
++	unsigned long start_addr, length, end_addr;
++	unsigned long start_pfn, nr_pages;
++	ssize_t ret;
++
++	ret = sscanf(buf, "%lx %lx", &start_addr, &length);
++	if (ret != 2)
++		return -EINVAL;
++
++	track_freed_range(start_addr, length);
++
++	/* Range-check - don't free any reserved memory that
++	 * wasn't reserved for phyp-dump */
++	if (start_addr < phyp_dump_info->init_reserve_start)
++		start_addr = phyp_dump_info->init_reserve_start;
++
++	end_addr = phyp_dump_info->init_reserve_start +
++			phyp_dump_info->init_reserve_size;
++	if (start_addr+length > end_addr)
++		length = end_addr - start_addr;
++
++	/* Release the region of memory assed in by user */
++	start_pfn = PFN_DOWN(start_addr);
++	nr_pages = PFN_DOWN(length);
++	release_memory_range(start_pfn, nr_pages);
++
++	return count;
++}
++
++static ssize_t show_release_region(struct kobject *kobj,
++			struct kobj_attribute *attr, char *buf)
++{
++	u64 second_addr_range;
++
++	/* total reserved size - start of scratch area */
++	second_addr_range = phyp_dump_info->init_reserve_size -
++				phyp_dump_info->reserved_scratch_size;
++	return sprintf(buf, "CPU:0x%lx-0x%lx: HPTE:0x%lx-0x%lx:"
++			    " DUMP:0x%lx-0x%lx, 0x%lx-0x%lx:\n",
++		phdr.cpu_data.destination_address,
++		phdr.cpu_data.length_copied,
++		phdr.hpte_data.destination_address,
++		phdr.hpte_data.length_copied,
++		phdr.kernel_data.destination_address,
++		phdr.kernel_data.length_copied,
++		phyp_dump_info->init_reserve_start,
++		second_addr_range);
++}
++
++static struct kobj_attribute rr = __ATTR(release_region, 0600,
++					show_release_region,
++					store_release_region);
++
++static int __init phyp_dump_setup(void)
++{
++	struct device_node *rtas;
++	const struct phyp_dump_header *dump_header = NULL;
++	unsigned long dump_area_start;
++	unsigned long dump_area_length;
++	int header_len = 0;
++	int rc;
++
++	/* If no memory was reserved in early boot, there is nothing to do */
++	if (phyp_dump_info->init_reserve_size == 0)
++		return 0;
++
++	/* Return if phyp dump not supported */
++	if (!phyp_dump_info->phyp_dump_configured)
++		return -ENOSYS;
++
++	/* Is there dump data waiting for us? If there isn't,
++	 * then register a new dump area, and release all of
++	 * the rest of the reserved ram.
++	 *
++	 * The /rtas/ibm,kernel-dump rtas node is present only
++	 * if there is dump data waiting for us.
++	 */
++	rtas = of_find_node_by_path("/rtas");
++	if (rtas) {
++		dump_header = of_get_property(rtas, "ibm,kernel-dump",
++						&header_len);
++		of_node_put(rtas);
++	}
++
++	print_dump_header(dump_header);
++	dump_area_length = init_dump_header(&phdr);
++	/* align down */
++	dump_area_start = phyp_dump_info->init_reserve_start & PAGE_MASK;
++
++	if (dump_header == NULL) {
++		register_dump_area(&phdr, dump_area_start);
++		return 0;
++	}
++
++	/* re-register the dump area, if old dump was invalid */
++	if ((dump_header) && (dump_header->status & DUMP_ERROR_FLAG)) {
++		invalidate_last_dump(&phdr, dump_area_start);
++		register_dump_area(&phdr, dump_area_start);
++		return 0;
++	}
++
++	if (dump_header) {
++		phyp_dump_info->reserved_scratch_addr =
++				dump_header->cpu_data.destination_address;
++		phyp_dump_info->reserved_scratch_size =
++				dump_header->cpu_data.source_length +
++				dump_header->hpte_data.source_length +
++				dump_header->kernel_data.source_length;
++	}
++
++	/* Should we create a dump_subsys, analogous to s390/ipl.c ? */
++	rc = sysfs_create_file(kernel_kobj, &rr.attr);
++	if (rc)
++		printk(KERN_ERR "phyp-dump: unable to create sysfs file (%d)\n",
++									rc);
++
++	/* ToDo: re-register the dump area, for next time. */
++	return 0;
++}
++machine_subsys_initcall(pseries, phyp_dump_setup);
++
++int __init early_init_dt_scan_phyp_dump(unsigned long node,
++		const char *uname, int depth, void *data)
++{
++	const unsigned int *sizes;
++
++	phyp_dump_info->phyp_dump_configured = 0;
++	phyp_dump_info->phyp_dump_is_active = 0;
++
++	if (depth != 1 || strcmp(uname, "rtas") != 0)
++		return 0;
++
++	if (of_get_flat_dt_prop(node, "ibm,configure-kernel-dump", NULL))
++		phyp_dump_info->phyp_dump_configured++;
++
++	if (of_get_flat_dt_prop(node, "ibm,dump-kernel", NULL))
++		phyp_dump_info->phyp_dump_is_active++;
++
++	sizes = of_get_flat_dt_prop(node, "ibm,configure-kernel-dump-sizes",
++				    NULL);
++	if (!sizes)
++		return 0;
++
++	if (sizes[0] == 1)
++		phyp_dump_info->cpu_state_size = *((unsigned long *)&sizes[1]);
++
++	if (sizes[3] == 2)
++		phyp_dump_info->hpte_region_size =
++						*((unsigned long *)&sizes[4]);
++	return 1;
++}
++
++/* Look for phyp_dump= cmdline option */
++static int __init early_phyp_dump_enabled(char *p)
++{
++	phyp_dump_info->phyp_dump_at_boot = 1;
++
++        if (!p)
++                return 0;
++
++        if (strncmp(p, "1", 1) == 0)
++		phyp_dump_info->phyp_dump_at_boot = 1;
++        else if (strncmp(p, "0", 1) == 0)
++		phyp_dump_info->phyp_dump_at_boot = 0;
++
++        return 0;
++}
++early_param("phyp_dump", early_phyp_dump_enabled);
++
++/* Look for phyp_dump_reserve_size= cmdline option */
++static int __init early_phyp_dump_reserve_size(char *p)
++{
++        if (p)
++		phyp_dump_info->reserve_bootvar = memparse(p, &p);
++
++        return 0;
++}
++early_param("phyp_dump_reserve_size", early_phyp_dump_reserve_size);
+--- a/arch/powerpc/platforms/pseries/pseries.h
++++ b/arch/powerpc/platforms/pseries/pseries.h
+@@ -38,4 +38,6 @@ extern void pSeries_final_fixup(void);
+ /* Poweron flag used for enabling auto ups restart */
+ extern unsigned long rtas_poweron_auto;
+ 
++extern void find_udbg_vterm(void);
++
+ #endif /* _PSERIES_PSERIES_H */
+--- a/arch/powerpc/platforms/pseries/reconfig.c
++++ b/arch/powerpc/platforms/pseries/reconfig.c
+@@ -222,14 +222,14 @@ static char * parse_next_property(char *
+ 	tmp = strchr(buf, ' ');
+ 	if (!tmp) {
+ 		printk(KERN_ERR "property parse failed in %s at line %d\n",
+-		       __FUNCTION__, __LINE__);
++		       __func__, __LINE__);
+ 		return NULL;
+ 	}
+ 	*tmp = '\0';
+ 
+ 	if (++tmp >= end) {
+ 		printk(KERN_ERR "property parse failed in %s at line %d\n",
+-		       __FUNCTION__, __LINE__);
++		       __func__, __LINE__);
+ 		return NULL;
+ 	}
+ 
+@@ -238,12 +238,12 @@ static char * parse_next_property(char *
+ 	*length = simple_strtoul(tmp, &tmp, 10);
+ 	if (*length == -1) {
+ 		printk(KERN_ERR "property parse failed in %s at line %d\n",
+-		       __FUNCTION__, __LINE__);
++		       __func__, __LINE__);
+ 		return NULL;
+ 	}
+ 	if (*tmp != ' ' || ++tmp >= end) {
+ 		printk(KERN_ERR "property parse failed in %s at line %d\n",
+-		       __FUNCTION__, __LINE__);
++		       __func__, __LINE__);
+ 		return NULL;
+ 	}
+ 
+@@ -252,12 +252,12 @@ static char * parse_next_property(char *
+ 	tmp += *length;
+ 	if (tmp > end) {
+ 		printk(KERN_ERR "property parse failed in %s at line %d\n",
+-		       __FUNCTION__, __LINE__);
++		       __func__, __LINE__);
+ 		return NULL;
+ 	}
+ 	else if (tmp < end && *tmp != ' ' && *tmp != '\0') {
+ 		printk(KERN_ERR "property parse failed in %s at line %d\n",
+-		       __FUNCTION__, __LINE__);
++		       __func__, __LINE__);
+ 		return NULL;
+ 	}
+ 	tmp++;
+--- a/arch/powerpc/platforms/pseries/scanlog.c
++++ b/arch/powerpc/platforms/pseries/scanlog.c
+@@ -195,31 +195,30 @@ const struct file_operations scanlog_fop
+ static int __init scanlog_init(void)
+ {
+ 	struct proc_dir_entry *ent;
++	void *data;
++	int err = -ENOMEM;
+ 
+ 	ibm_scan_log_dump = rtas_token("ibm,scan-log-dump");
+-	if (ibm_scan_log_dump == RTAS_UNKNOWN_SERVICE) {
+-		printk(KERN_ERR "scan-log-dump not implemented on this system\n");
+-		return -EIO;
+-	}
++	if (ibm_scan_log_dump == RTAS_UNKNOWN_SERVICE)
++		return -ENODEV;
+ 
+-        ent = create_proc_entry("ppc64/rtas/scan-log-dump",  S_IRUSR, NULL);
+-	if (ent) {
+-		ent->proc_fops = &scanlog_fops;
+-		/* Ideally we could allocate a buffer < 4G */
+-		ent->data = kmalloc(RTAS_DATA_BUF_SIZE, GFP_KERNEL);
+-		if (!ent->data) {
+-			printk(KERN_ERR "Failed to allocate a buffer\n");
+-			remove_proc_entry("scan-log-dump", ent->parent);
+-			return -ENOMEM;
+-		}
+-		((unsigned int *)ent->data)[0] = 0;
+-	} else {
+-		printk(KERN_ERR "Failed to create ppc64/scan-log-dump proc entry\n");
+-		return -EIO;
+-	}
++	/* Ideally we could allocate a buffer < 4G */
++	data = kzalloc(RTAS_DATA_BUF_SIZE, GFP_KERNEL);
++	if (!data)
++		goto err;
++
++	ent = proc_create("ppc64/rtas/scan-log-dump", S_IRUSR, NULL,
++			  &scanlog_fops);
++	if (!ent)
++		goto err;
++
++	ent->data = data;
+ 	proc_ppc64_scan_log_dump = ent;
+ 
+ 	return 0;
++err:
++	kfree(data);
++	return err;
+ }
+ 
+ static void __exit scanlog_cleanup(void)
+--- a/arch/powerpc/platforms/pseries/setup.c
++++ b/arch/powerpc/platforms/pseries/setup.c
+@@ -76,9 +76,6 @@
+ #define DBG(fmt...)
+ #endif
+ 
+-/* move those away to a .h */
+-extern void find_udbg_vterm(void);
+-
+ int fwnmi_active;  /* TRUE if an FWNMI handler is present */
+ 
+ static void pseries_shared_idle_sleep(void);
+@@ -127,14 +124,60 @@ void pseries_8259_cascade(unsigned int i
+ 	desc->chip->eoi(irq);
+ }
+ 
+-static void __init pseries_mpic_init_IRQ(void)
++static void __init pseries_setup_i8259_cascade(void)
+ {
+-	struct device_node *np, *old, *cascade = NULL;
+-        const unsigned int *addrp;
++	struct device_node *np, *old, *found = NULL;
++	unsigned int cascade;
++	const u32 *addrp;
+ 	unsigned long intack = 0;
++	int naddr;
++
++	for_each_node_by_type(np, "interrupt-controller") {
++		if (of_device_is_compatible(np, "chrp,iic")) {
++			found = np;
++			break;
++		}
++	}
++
++	if (found == NULL) {
++		printk(KERN_DEBUG "pic: no ISA interrupt controller\n");
++		return;
++	}
++
++	cascade = irq_of_parse_and_map(found, 0);
++	if (cascade == NO_IRQ) {
++		printk(KERN_ERR "pic: failed to map cascade interrupt");
++		return;
++	}
++	pr_debug("pic: cascade mapped to irq %d\n", cascade);
++
++	for (old = of_node_get(found); old != NULL ; old = np) {
++		np = of_get_parent(old);
++		of_node_put(old);
++		if (np == NULL)
++			break;
++		if (strcmp(np->name, "pci") != 0)
++			continue;
++		addrp = of_get_property(np, "8259-interrupt-acknowledge", NULL);
++		if (addrp == NULL)
++			continue;
++		naddr = of_n_addr_cells(np);
++		intack = addrp[naddr-1];
++		if (naddr > 1)
++			intack |= ((unsigned long)addrp[naddr-2]) << 32;
++	}
++	if (intack)
++		printk(KERN_DEBUG "pic: PCI 8259 intack at 0x%016lx\n", intack);
++	i8259_init(found, intack);
++	of_node_put(found);
++	set_irq_chained_handler(cascade, pseries_8259_cascade);
++}
++
++static void __init pseries_mpic_init_IRQ(void)
++{
++	struct device_node *np;
+ 	const unsigned int *opprop;
+ 	unsigned long openpic_addr = 0;
+-	unsigned int cascade_irq;
+ 	int naddr, n, i, opplen;
+ 	struct mpic *mpic;
+ 
+@@ -167,43 +210,13 @@ static void __init pseries_mpic_init_IRQ
+ 	mpic_init(mpic);
+ 
+ 	/* Look for cascade */
+-	for_each_node_by_type(np, "interrupt-controller")
+-		if (of_device_is_compatible(np, "chrp,iic")) {
+-			cascade = np;
+-			break;
+-		}
+-	if (cascade == NULL)
+-		return;
+-
+-	cascade_irq = irq_of_parse_and_map(cascade, 0);
+-	if (cascade_irq == NO_IRQ) {
+-		printk(KERN_ERR "mpic: failed to map cascade interrupt");
+-		return;
+-	}
++	pseries_setup_i8259_cascade();
++}
+ 
+-	/* Check ACK type */
+-	for (old = of_node_get(cascade); old != NULL ; old = np) {
+-		np = of_get_parent(old);
+-		of_node_put(old);
+-		if (np == NULL)
+-			break;
+-		if (strcmp(np->name, "pci") != 0)
+-			continue;
+-		addrp = of_get_property(np, "8259-interrupt-acknowledge",
+-					    NULL);
+-		if (addrp == NULL)
+-			continue;
+-		naddr = of_n_addr_cells(np);
+-		intack = addrp[naddr-1];
+-		if (naddr > 1)
+-			intack |= ((unsigned long)addrp[naddr-2]) << 32;
+-	}
+-	if (intack)
+-		printk(KERN_DEBUG "mpic: PCI 8259 intack at 0x%016lx\n",
+-		       intack);
+-	i8259_init(cascade, intack);
+-	of_node_put(cascade);
+-	set_irq_chained_handler(cascade_irq, pseries_8259_cascade);
++static void __init pseries_xics_init_IRQ(void)
++{
++	xics_init_IRQ();
++	pseries_setup_i8259_cascade();
+ }
+ 
+ static void pseries_lpar_enable_pmcs(void)
+@@ -235,7 +248,7 @@ static void __init pseries_discover_pic(
+ 			smp_init_pseries_mpic();
+ 			return;
+ 		} else if (strstr(typep, "ppc-xicp")) {
+-			ppc_md.init_IRQ       = xics_init_IRQ;
++			ppc_md.init_IRQ       = pseries_xics_init_IRQ;
+ 			setup_kexec_cpu_down_xics();
+ 			smp_init_pseries_xics();
+ 			return;
+@@ -393,6 +406,7 @@ static void pseries_dedicated_idle_sleep
+ { 
+ 	unsigned int cpu = smp_processor_id();
+ 	unsigned long start_snooze;
++	unsigned long in_purr, out_purr;
+ 
+ 	/*
+ 	 * Indicate to the HV that we are idle. Now would be
+@@ -400,6 +414,7 @@ static void pseries_dedicated_idle_sleep
+ 	 */
+ 	get_lppaca()->idle = 1;
+ 	get_lppaca()->donate_dedicated_cpu = 1;
++	in_purr = mfspr(SPRN_PURR);
+ 
+ 	/*
+ 	 * We come in with interrupts disabled, and need_resched()
+@@ -432,6 +447,8 @@ static void pseries_dedicated_idle_sleep
+ 
+ out:
+ 	HMT_medium();
++	out_purr = mfspr(SPRN_PURR);
++	get_lppaca()->wait_state_cycles += out_purr - in_purr;
+ 	get_lppaca()->donate_dedicated_cpu = 0;
+ 	get_lppaca()->idle = 0;
+ }
+--- a/arch/powerpc/platforms/pseries/xics.c
++++ b/arch/powerpc/platforms/pseries/xics.c
+@@ -516,6 +516,8 @@ static struct irq_chip xics_pic_lpar = {
+ 	.set_affinity = xics_set_affinity
+ };
+ 
++/* Points to the irq_chip we're actually using */
++static struct irq_chip *xics_irq_chip;
+ 
+ static int xics_host_match(struct irq_host *h, struct device_node *node)
+ {
+@@ -526,23 +528,13 @@ static int xics_host_match(struct irq_ho
+ 	return !of_device_is_compatible(node, "chrp,iic");
+ }
+ 
+-static int xics_host_map_direct(struct irq_host *h, unsigned int virq,
+-				irq_hw_number_t hw)
++static int xics_host_map(struct irq_host *h, unsigned int virq,
++			 irq_hw_number_t hw)
+ {
+-	pr_debug("xics: map_direct virq %d, hwirq 0x%lx\n", virq, hw);
++	pr_debug("xics: map virq %d, hwirq 0x%lx\n", virq, hw);
+ 
+ 	get_irq_desc(virq)->status |= IRQ_LEVEL;
+-	set_irq_chip_and_handler(virq, &xics_pic_direct, handle_fasteoi_irq);
+-	return 0;
+-}
+-
+-static int xics_host_map_lpar(struct irq_host *h, unsigned int virq,
+-			      irq_hw_number_t hw)
+-{
+-	pr_debug("xics: map_direct virq %d, hwirq 0x%lx\n", virq, hw);
+-
+-	get_irq_desc(virq)->status |= IRQ_LEVEL;
+-	set_irq_chip_and_handler(virq, &xics_pic_lpar, handle_fasteoi_irq);
++	set_irq_chip_and_handler(virq, xics_irq_chip, handle_fasteoi_irq);
+ 	return 0;
+ }
+ 
+@@ -561,27 +553,20 @@ static int xics_host_xlate(struct irq_ho
+ 	return 0;
+ }
+ 
+-static struct irq_host_ops xics_host_direct_ops = {
+-	.match = xics_host_match,
+-	.map = xics_host_map_direct,
+-	.xlate = xics_host_xlate,
+-};
+-
+-static struct irq_host_ops xics_host_lpar_ops = {
++static struct irq_host_ops xics_host_ops = {
+ 	.match = xics_host_match,
+-	.map = xics_host_map_lpar,
++	.map = xics_host_map,
+ 	.xlate = xics_host_xlate,
+ };
+ 
+ static void __init xics_init_host(void)
+ {
+-	struct irq_host_ops *ops;
+-
+ 	if (firmware_has_feature(FW_FEATURE_LPAR))
+-		ops = &xics_host_lpar_ops;
++		xics_irq_chip = &xics_pic_lpar;
+ 	else
+-		ops = &xics_host_direct_ops;
+-	xics_host = irq_alloc_host(NULL, IRQ_HOST_MAP_TREE, 0, ops,
++		xics_irq_chip = &xics_pic_direct;
++
++	xics_host = irq_alloc_host(NULL, IRQ_HOST_MAP_TREE, 0, &xics_host_ops,
+ 				   XICS_IRQ_SPURIOUS);
+ 	BUG_ON(xics_host == NULL);
+ 	irq_set_default_host(xics_host);
+@@ -655,52 +640,6 @@ static void __init xics_init_one_node(st
+ 	}
+ }
+ 
+-
+-static void __init xics_setup_8259_cascade(void)
+-{
+-	struct device_node *np, *old, *found = NULL;
+-	int cascade, naddr;
+-	const u32 *addrp;
+-	unsigned long intack = 0;
+-
+-	for_each_node_by_type(np, "interrupt-controller")
+-		if (of_device_is_compatible(np, "chrp,iic")) {
+-			found = np;
+-			break;
+-		}
+-	if (found == NULL) {
+-		printk(KERN_DEBUG "xics: no ISA interrupt controller\n");
+-		return;
+-	}
+-	cascade = irq_of_parse_and_map(found, 0);
+-	if (cascade == NO_IRQ) {
+-		printk(KERN_ERR "xics: failed to map cascade interrupt");
+-		return;
+-	}
+-	pr_debug("xics: cascade mapped to irq %d\n", cascade);
+-
+-	for (old = of_node_get(found); old != NULL ; old = np) {
+-		np = of_get_parent(old);
+-		of_node_put(old);
+-		if (np == NULL)
+-			break;
+-		if (strcmp(np->name, "pci") != 0)
+-			continue;
+-		addrp = of_get_property(np, "8259-interrupt-acknowledge", NULL);
+-		if (addrp == NULL)
+-			continue;
+-		naddr = of_n_addr_cells(np);
+-		intack = addrp[naddr-1];
+-		if (naddr > 1)
+-			intack |= ((unsigned long)addrp[naddr-2]) << 32;
+-	}
+-	if (intack)
+-		printk(KERN_DEBUG "xics: PCI 8259 intack at 0x%016lx\n", intack);
+-	i8259_init(found, intack);
+-	of_node_put(found);
+-	set_irq_chained_handler(cascade, pseries_8259_cascade);
+-}
+-
+ void __init xics_init_IRQ(void)
+ {
+ 	struct device_node *np;
+@@ -733,8 +672,6 @@ void __init xics_init_IRQ(void)
+ 
+ 	xics_setup_cpu();
+ 
+-	xics_setup_8259_cascade();
+-
+ 	ppc64_boot_msg(0x21, "XICS Done");
+ }
+ 
+--- a/arch/powerpc/platforms/pseries/xics.h
++++ b/arch/powerpc/platforms/pseries/xics.h
+@@ -28,7 +28,4 @@ struct xics_ipi_struct {
+ 
+ extern struct xics_ipi_struct xics_ipi_message[NR_CPUS] __cacheline_aligned;
+ 
+-struct irq_desc;
+-extern void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc);
+-
+ #endif /* _POWERPC_KERNEL_XICS_H */
+--- a/arch/powerpc/sysdev/Makefile
++++ b/arch/powerpc/sysdev/Makefile
+@@ -12,6 +12,7 @@ obj-$(CONFIG_U3_DART)		+= dart_iommu.o
+ obj-$(CONFIG_MMIO_NVRAM)	+= mmio_nvram.o
+ obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o
+ obj-$(CONFIG_FSL_PCI)		+= fsl_pci.o
++obj-$(CONFIG_FSL_LBC)		+= fsl_lbc.o
+ obj-$(CONFIG_RAPIDIO)		+= fsl_rio.o
+ obj-$(CONFIG_TSI108_BRIDGE)	+= tsi108_pci.o tsi108_dev.o
+ obj-$(CONFIG_QUICC_ENGINE)	+= qe_lib/
+@@ -27,6 +28,7 @@ obj-$(CONFIG_PPC_INDIRECT_PCI)	+= indire
+ obj-$(CONFIG_PPC_I8259)		+= i8259.o
+ obj-$(CONFIG_IPIC)		+= ipic.o
+ obj-$(CONFIG_4xx)		+= uic.o
++obj-$(CONFIG_4xx_SOC)		+= ppc4xx_soc.o
+ obj-$(CONFIG_XILINX_VIRTEX)	+= xilinx_intc.o
+ obj-$(CONFIG_OF_RTC)		+= of_rtc.o
+ ifeq ($(CONFIG_PCI),y)
+--- a/arch/powerpc/sysdev/cpm1.c
++++ b/arch/powerpc/sysdev/cpm1.c
+@@ -44,9 +44,6 @@
+ 
+ #define CPM_MAP_SIZE    (0x4000)
+ 
+-#ifndef CONFIG_PPC_CPM_NEW_BINDING
+-static void m8xx_cpm_dpinit(void);
+-#endif
+ cpm8xx_t __iomem *cpmp;  /* Pointer to comm processor space */
+ immap_t __iomem *mpc8xx_immr;
+ static cpic8xx_t __iomem *cpic_reg;
+@@ -229,12 +226,7 @@ void __init cpm_reset(void)
+ 	out_be32(&siu_conf->sc_sdcr, 1);
+ 	immr_unmap(siu_conf);
+ 
+-#ifdef CONFIG_PPC_CPM_NEW_BINDING
+ 	cpm_muram_init();
+-#else
+-	/* Reclaim the DP memory for our use. */
+-	m8xx_cpm_dpinit();
+-#endif
+ }
+ 
+ static DEFINE_SPINLOCK(cmd_lock);
+@@ -257,7 +249,7 @@ int cpm_command(u32 command, u8 opcode)
+ 		if ((in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0)
+ 			goto out;
+ 
+-	printk(KERN_ERR "%s(): Not able to issue CPM command\n", __FUNCTION__);
++	printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__);
+ 	ret = -EIO;
+ out:
+ 	spin_unlock_irqrestore(&cmd_lock, flags);
+@@ -293,110 +285,6 @@ cpm_setbrg(uint brg, uint rate)
+ 			      CPM_BRG_EN | CPM_BRG_DIV16);
+ }
+ 
+-#ifndef CONFIG_PPC_CPM_NEW_BINDING
+-/*
+- * dpalloc / dpfree bits.
+- */
+-static spinlock_t cpm_dpmem_lock;
+-/*
+- * 16 blocks should be enough to satisfy all requests
+- * until the memory subsystem goes up...
+- */
+-static rh_block_t cpm_boot_dpmem_rh_block[16];
+-static rh_info_t cpm_dpmem_info;
+-
+-#define CPM_DPMEM_ALIGNMENT	8
+-static u8 __iomem *dpram_vbase;
+-static phys_addr_t dpram_pbase;
+-
+-static void m8xx_cpm_dpinit(void)
+-{
+-	spin_lock_init(&cpm_dpmem_lock);
+-
+-	dpram_vbase = cpmp->cp_dpmem;
+-	dpram_pbase = get_immrbase() + offsetof(immap_t, im_cpm.cp_dpmem);
+-
+-	/* Initialize the info header */
+-	rh_init(&cpm_dpmem_info, CPM_DPMEM_ALIGNMENT,
+-			sizeof(cpm_boot_dpmem_rh_block) /
+-			sizeof(cpm_boot_dpmem_rh_block[0]),
+-			cpm_boot_dpmem_rh_block);
+-
+-	/*
+-	 * Attach the usable dpmem area.
+-	 * XXX: This is actually crap.  CPM_DATAONLY_BASE and
+-	 * CPM_DATAONLY_SIZE are a subset of the available dparm.  It varies
+-	 * with the processor and the microcode patches applied / activated.
+-	 * But the following should be at least safe.
+-	 */
+-	rh_attach_region(&cpm_dpmem_info, CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE);
+-}
+-
+-/*
+- * Allocate the requested size worth of DP memory.
+- * This function returns an offset into the DPRAM area.
+- * Use cpm_dpram_addr() to get the virtual address of the area.
+- */
+-unsigned long cpm_dpalloc(uint size, uint align)
+-{
+-	unsigned long start;
+-	unsigned long flags;
+-
+-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
+-	cpm_dpmem_info.alignment = align;
+-	start = rh_alloc(&cpm_dpmem_info, size, "commproc");
+-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+-
+-	return (uint)start;
+-}
+-EXPORT_SYMBOL(cpm_dpalloc);
+-
+-int cpm_dpfree(unsigned long offset)
+-{
+-	int ret;
+-	unsigned long flags;
+-
+-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
+-	ret = rh_free(&cpm_dpmem_info, offset);
+-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+-
+-	return ret;
+-}
+-EXPORT_SYMBOL(cpm_dpfree);
+-
+-unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align)
+-{
+-	unsigned long start;
+-	unsigned long flags;
+-
+-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
+-	cpm_dpmem_info.alignment = align;
+-	start = rh_alloc_fixed(&cpm_dpmem_info, offset, size, "commproc");
+-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+-
+-	return start;
+-}
+-EXPORT_SYMBOL(cpm_dpalloc_fixed);
+-
+-void cpm_dpdump(void)
+-{
+-	rh_dump(&cpm_dpmem_info);
+-}
+-EXPORT_SYMBOL(cpm_dpdump);
+-
+-void *cpm_dpram_addr(unsigned long offset)
+-{
+-	return (void *)(dpram_vbase + offset);
+-}
+-EXPORT_SYMBOL(cpm_dpram_addr);
+-
+-uint cpm_dpram_phys(u8 *addr)
+-{
+-	return (dpram_pbase + (uint)(addr - dpram_vbase));
+-}
+-EXPORT_SYMBOL(cpm_dpram_phys);
+-#endif /* !CONFIG_PPC_CPM_NEW_BINDING */
+-
+ struct cpm_ioport16 {
+ 	__be16 dir, par, odr_sor, dat, intr;
+ 	__be16 res[3];
+--- a/arch/powerpc/sysdev/cpm2.c
++++ b/arch/powerpc/sysdev/cpm2.c
+@@ -46,10 +46,6 @@
+ 
+ #include <sysdev/fsl_soc.h>
+ 
+-#ifndef CONFIG_PPC_CPM_NEW_BINDING
+-static void cpm2_dpinit(void);
+-#endif
+-
+ cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor space */
+ 
+ /* We allocate this here because it is used almost exclusively for
+@@ -71,15 +67,17 @@ void __init cpm2_reset(void)
+ 
+ 	/* Reclaim the DP memory for our use.
+ 	 */
+-#ifdef CONFIG_PPC_CPM_NEW_BINDING
+ 	cpm_muram_init();
+-#else
+-	cpm2_dpinit();
+-#endif
+ 
+ 	/* Tell everyone where the comm processor resides.
+ 	 */
+ 	cpmp = &cpm2_immr->im_cpm;
++
++#ifndef CONFIG_PPC_EARLY_DEBUG_CPM
++	/* Reset the CPM.
++	 */
++	cpm_command(CPM_CR_RST, 0);
++#endif
+ }
+ 
+ static DEFINE_SPINLOCK(cmd_lock);
+@@ -99,7 +97,7 @@ int cpm_command(u32 command, u8 opcode)
+ 		if ((in_be32(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0)
+ 			goto out;
+ 
+-	printk(KERN_ERR "%s(): Not able to issue CPM command\n", __FUNCTION__);
++	printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__);
+ 	ret = -EIO;
+ out:
+ 	spin_unlock_irqrestore(&cmd_lock, flags);
+@@ -347,95 +345,6 @@ int cpm2_smc_clk_setup(enum cpm_clk_targ
+ 	return ret;
+ }
+ 
+-#ifndef CONFIG_PPC_CPM_NEW_BINDING
+-/*
+- * dpalloc / dpfree bits.
+- */
+-static spinlock_t cpm_dpmem_lock;
+-/* 16 blocks should be enough to satisfy all requests
+- * until the memory subsystem goes up... */
+-static rh_block_t cpm_boot_dpmem_rh_block[16];
+-static rh_info_t cpm_dpmem_info;
+-static u8 __iomem *im_dprambase;
+-
+-static void cpm2_dpinit(void)
+-{
+-	spin_lock_init(&cpm_dpmem_lock);
+-
+-	/* initialize the info header */
+-	rh_init(&cpm_dpmem_info, 1,
+-			sizeof(cpm_boot_dpmem_rh_block) /
+-			sizeof(cpm_boot_dpmem_rh_block[0]),
+-			cpm_boot_dpmem_rh_block);
+-
+-	im_dprambase = cpm2_immr;
+-
+-	/* Attach the usable dpmem area */
+-	/* XXX: This is actually crap. CPM_DATAONLY_BASE and
+-	 * CPM_DATAONLY_SIZE is only a subset of the available dpram. It
+-	 * varies with the processor and the microcode patches activated.
+-	 * But the following should be at least safe.
+-	 */
+-	rh_attach_region(&cpm_dpmem_info, CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE);
+-}
+-
+-/* This function returns an index into the DPRAM area.
+- */
+-unsigned long cpm_dpalloc(uint size, uint align)
+-{
+-	unsigned long start;
+-	unsigned long flags;
+-
+-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
+-	cpm_dpmem_info.alignment = align;
+-	start = rh_alloc(&cpm_dpmem_info, size, "commproc");
+-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+-
+-	return (uint)start;
+-}
+-EXPORT_SYMBOL(cpm_dpalloc);
+-
+-int cpm_dpfree(unsigned long offset)
+-{
+-	int ret;
+-	unsigned long flags;
+-
+-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
+-	ret = rh_free(&cpm_dpmem_info, offset);
+-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+-
+-	return ret;
+-}
+-EXPORT_SYMBOL(cpm_dpfree);
+-
+-/* not sure if this is ever needed */
+-unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align)
+-{
+-	unsigned long start;
+-	unsigned long flags;
+-
+-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
+-	cpm_dpmem_info.alignment = align;
+-	start = rh_alloc_fixed(&cpm_dpmem_info, offset, size, "commproc");
+-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+-
+-	return start;
+-}
+-EXPORT_SYMBOL(cpm_dpalloc_fixed);
+-
+-void cpm_dpdump(void)
+-{
+-	rh_dump(&cpm_dpmem_info);
+-}
+-EXPORT_SYMBOL(cpm_dpdump);
+-
+-void *cpm_dpram_addr(unsigned long offset)
+-{
+-	return (void *)(im_dprambase + offset);
+-}
+-EXPORT_SYMBOL(cpm_dpram_addr);
+-#endif /* !CONFIG_PPC_CPM_NEW_BINDING */
+-
+ struct cpm2_ioports {
+ 	u32 dir, par, sor, odr, dat;
+ 	u32 res[3];
+--- a/arch/powerpc/sysdev/cpm_common.c
++++ b/arch/powerpc/sysdev/cpm_common.c
+@@ -58,7 +58,6 @@ void __init udbg_init_cpm(void)
+ }
+ #endif
+ 
+-#ifdef CONFIG_PPC_CPM_NEW_BINDING
+ static spinlock_t cpm_muram_lock;
+ static rh_block_t cpm_boot_muram_rh_block[16];
+ static rh_info_t cpm_muram_info;
+@@ -199,5 +198,3 @@ dma_addr_t cpm_muram_dma(void __iomem *a
+ 	return muram_pbase + ((u8 __iomem *)addr - muram_vbase);
+ }
+ EXPORT_SYMBOL(cpm_muram_dma);
+-
+-#endif /* CONFIG_PPC_CPM_NEW_BINDING */
+--- a/arch/powerpc/sysdev/dart_iommu.c
++++ b/arch/powerpc/sysdev/dart_iommu.c
+@@ -37,6 +37,7 @@
+ #include <linux/dma-mapping.h>
+ #include <linux/vmalloc.h>
+ #include <linux/suspend.h>
++#include <linux/lmb.h>
+ #include <asm/io.h>
+ #include <asm/prom.h>
+ #include <asm/iommu.h>
+@@ -44,7 +45,6 @@
+ #include <asm/machdep.h>
+ #include <asm/abs_addr.h>
+ #include <asm/cacheflush.h>
+-#include <asm/lmb.h>
+ #include <asm/ppc-pci.h>
+ 
+ #include "dart.h"
+--- /dev/null
++++ b/arch/powerpc/sysdev/fsl_lbc.c
+@@ -0,0 +1,129 @@
++/*
++ * Freescale LBC and UPM routines.
++ *
++ * Copyright (c) 2007-2008  MontaVista Software, Inc.
++ *
++ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#include <linux/kernel.h>
++#include <linux/of.h>
++#include <asm/fsl_lbc.h>
++
++spinlock_t fsl_lbc_lock = __SPIN_LOCK_UNLOCKED(fsl_lbc_lock);
++
++struct fsl_lbc_regs __iomem *fsl_lbc_regs;
++EXPORT_SYMBOL(fsl_lbc_regs);
++
++static char __initdata *compat_lbc[] = {
++	"fsl,pq2-localbus",
++	"fsl,pq2pro-localbus",
++	"fsl,pq3-localbus",
++	"fsl,elbc",
++};
++
++static int __init fsl_lbc_init(void)
++{
++	struct device_node *lbus;
++	int i;
++
++	for (i = 0; i < ARRAY_SIZE(compat_lbc); i++) {
++		lbus = of_find_compatible_node(NULL, NULL, compat_lbc[i]);
++		if (lbus)
++			goto found;
++	}
++	return -ENODEV;
++
++found:
++	fsl_lbc_regs = of_iomap(lbus, 0);
++	of_node_put(lbus);
++	if (!fsl_lbc_regs)
++		return -ENOMEM;
++	return 0;
++}
++arch_initcall(fsl_lbc_init);
++
++/**
++ * fsl_lbc_find - find Localbus bank
++ * @addr_base:	base address of the memory bank
++ *
++ * This function walks LBC banks comparing "Base address" field of the BR
++ * registers with the supplied addr_base argument. When bases match this
++ * function returns bank number (starting with 0), otherwise it returns
++ * appropriate errno value.
++ */
++int fsl_lbc_find(phys_addr_t addr_base)
++{
++	int i;
++
++	if (!fsl_lbc_regs)
++		return -ENODEV;
++
++	for (i = 0; i < ARRAY_SIZE(fsl_lbc_regs->bank); i++) {
++		__be32 br = in_be32(&fsl_lbc_regs->bank[i].br);
++		__be32 or = in_be32(&fsl_lbc_regs->bank[i].or);
++
++		if (br & BR_V && (br & or & BR_BA) == addr_base)
++			return i;
++	}
++
++	return -ENOENT;
++}
++EXPORT_SYMBOL(fsl_lbc_find);
++
++/**
++ * fsl_upm_find - find pre-programmed UPM via base address
++ * @addr_base:	base address of the memory bank controlled by the UPM
++ * @upm:	pointer to the allocated fsl_upm structure
++ *
++ * This function fills fsl_upm structure so you can use it with the rest of
++ * UPM API. On success this function returns 0, otherwise it returns
++ * appropriate errno value.
++ */
++int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm)
++{
++	int bank;
++	__be32 br;
++
++	bank = fsl_lbc_find(addr_base);
++	if (bank < 0)
++		return bank;
++
++	br = in_be32(&fsl_lbc_regs->bank[bank].br);
++
++	switch (br & BR_MSEL) {
++	case BR_MS_UPMA:
++		upm->mxmr = &fsl_lbc_regs->mamr;
++		break;
++	case BR_MS_UPMB:
++		upm->mxmr = &fsl_lbc_regs->mbmr;
++		break;
++	case BR_MS_UPMC:
++		upm->mxmr = &fsl_lbc_regs->mcmr;
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	switch (br & BR_PS) {
++	case BR_PS_8:
++		upm->width = 8;
++		break;
++	case BR_PS_16:
++		upm->width = 16;
++		break;
++	case BR_PS_32:
++		upm->width = 32;
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	return 0;
++}
++EXPORT_SYMBOL(fsl_upm_find);
+--- a/arch/powerpc/sysdev/fsl_soc.c
++++ b/arch/powerpc/sysdev/fsl_soc.c
+@@ -75,6 +75,33 @@ phys_addr_t get_immrbase(void)
+ 
+ EXPORT_SYMBOL(get_immrbase);
+ 
++static u32 sysfreq = -1;
++
++u32 fsl_get_sys_freq(void)
++{
++	struct device_node *soc;
++	const u32 *prop;
++	int size;
++
++	if (sysfreq != -1)
++		return sysfreq;
++
++	soc = of_find_node_by_type(NULL, "soc");
++	if (!soc)
++		return -1;
++
++	prop = of_get_property(soc, "clock-frequency", &size);
++	if (!prop || size != sizeof(*prop) || *prop == 0)
++		prop = of_get_property(soc, "bus-frequency", &size);
++
++	if (prop && size == sizeof(*prop))
++		sysfreq = *prop;
++
++	of_node_put(soc);
++	return sysfreq;
++}
++EXPORT_SYMBOL(fsl_get_sys_freq);
++
+ #if defined(CONFIG_CPM2) || defined(CONFIG_QUICC_ENGINE) || defined(CONFIG_8xx)
+ 
+ static u32 brgfreq = -1;
+@@ -516,9 +543,9 @@ arch_initcall(fsl_i2c_of_init);
+ static int __init mpc83xx_wdt_init(void)
+ {
+ 	struct resource r;
+-	struct device_node *soc, *np;
++	struct device_node *np;
+ 	struct platform_device *dev;
+-	const unsigned int *freq;
++	u32 freq = fsl_get_sys_freq();
+ 	int ret;
+ 
+ 	np = of_find_compatible_node(NULL, "watchdog", "mpc83xx_wdt");
+@@ -528,19 +555,6 @@ static int __init mpc83xx_wdt_init(void)
+ 		goto nodev;
+ 	}
+ 
+-	soc = of_find_node_by_type(NULL, "soc");
+-
+-	if (!soc) {
+-		ret = -ENODEV;
+-		goto nosoc;
+-	}
+-
+-	freq = of_get_property(soc, "bus-frequency", NULL);
+-	if (!freq) {
+-		ret = -ENODEV;
+-		goto err;
+-	}
+-
+ 	memset(&r, 0, sizeof(r));
+ 
+ 	ret = of_address_to_resource(np, 0, &r);
+@@ -553,20 +567,16 @@ static int __init mpc83xx_wdt_init(void)
+ 		goto err;
+ 	}
+ 
+-	ret = platform_device_add_data(dev, freq, sizeof(int));
++	ret = platform_device_add_data(dev, &freq, sizeof(freq));
+ 	if (ret)
+ 		goto unreg;
+ 
+-	of_node_put(soc);
+ 	of_node_put(np);
+-
+ 	return 0;
+ 
+ unreg:
+ 	platform_device_unregister(dev);
+ err:
+-	of_node_put(soc);
+-nosoc:
+ 	of_node_put(np);
+ nodev:
+ 	return ret;
+@@ -735,547 +745,6 @@ err:
+ 
+ arch_initcall(fsl_usb_of_init);
+ 
+-#ifndef CONFIG_PPC_CPM_NEW_BINDING
+-#ifdef CONFIG_CPM2
+-
+-extern void init_scc_ioports(struct fs_uart_platform_info*);
+-
+-static const char fcc_regs[] = "fcc_regs";
+-static const char fcc_regs_c[] = "fcc_regs_c";
+-static const char fcc_pram[] = "fcc_pram";
+-static char bus_id[9][BUS_ID_SIZE];
+-
+-static int __init fs_enet_of_init(void)
+-{
+-	struct device_node *np;
+-	unsigned int i;
+-	struct platform_device *fs_enet_dev;
+-	struct resource res;
+-	int ret;
+-
+-	for (np = NULL, i = 0;
+-	     (np = of_find_compatible_node(np, "network", "fs_enet")) != NULL;
+-	     i++) {
+-		struct resource r[4];
+-		struct device_node *phy, *mdio;
+-		struct fs_platform_info fs_enet_data;
+-		const unsigned int *id, *phy_addr, *phy_irq;
+-		const void *mac_addr;
+-		const phandle *ph;
+-		const char *model;
+-
+-		memset(r, 0, sizeof(r));
+-		memset(&fs_enet_data, 0, sizeof(fs_enet_data));
+-
+-		ret = of_address_to_resource(np, 0, &r[0]);
+-		if (ret)
+-			goto err;
+-		r[0].name = fcc_regs;
+-
+-		ret = of_address_to_resource(np, 1, &r[1]);
+-		if (ret)
+-			goto err;
+-		r[1].name = fcc_pram;
+-
+-		ret = of_address_to_resource(np, 2, &r[2]);
+-		if (ret)
+-			goto err;
+-		r[2].name = fcc_regs_c;
+-		fs_enet_data.fcc_regs_c = r[2].start;
+-
+-		of_irq_to_resource(np, 0, &r[3]);
+-
+-		fs_enet_dev =
+-		    platform_device_register_simple("fsl-cpm-fcc", i, &r[0], 4);
+-
+-		if (IS_ERR(fs_enet_dev)) {
+-			ret = PTR_ERR(fs_enet_dev);
+-			goto err;
+-		}
+-
+-		model = of_get_property(np, "model", NULL);
+-		if (model == NULL) {
+-			ret = -ENODEV;
+-			goto unreg;
+-		}
+-
+-		mac_addr = of_get_mac_address(np);
+-		if (mac_addr)
+-			memcpy(fs_enet_data.macaddr, mac_addr, 6);
+-
+-		ph = of_get_property(np, "phy-handle", NULL);
+-		phy = of_find_node_by_phandle(*ph);
+-
+-		if (phy == NULL) {
+-			ret = -ENODEV;
+-			goto unreg;
+-		}
+-
+-		phy_addr = of_get_property(phy, "reg", NULL);
+-		fs_enet_data.phy_addr = *phy_addr;
+-
+-		phy_irq = of_get_property(phy, "interrupts", NULL);
+-
+-		id = of_get_property(np, "device-id", NULL);
+-		fs_enet_data.fs_no = *id;
+-		strcpy(fs_enet_data.fs_type, model);
+-
+-		mdio = of_get_parent(phy);
+-                ret = of_address_to_resource(mdio, 0, &res);
+-                if (ret) {
+-                        of_node_put(phy);
+-                        of_node_put(mdio);
+-                        goto unreg;
+-                }
+-
+-		fs_enet_data.clk_rx = *((u32 *)of_get_property(np,
+-						"rx-clock", NULL));
+-		fs_enet_data.clk_tx = *((u32 *)of_get_property(np,
+-						"tx-clock", NULL));
+-
+-		if (strstr(model, "FCC")) {
+-			int fcc_index = *id - 1;
+-			const unsigned char *mdio_bb_prop;
+-
+-			fs_enet_data.dpram_offset = (u32)cpm_dpram_addr(0);
+-			fs_enet_data.rx_ring = 32;
+-			fs_enet_data.tx_ring = 32;
+-			fs_enet_data.rx_copybreak = 240;
+-			fs_enet_data.use_napi = 0;
+-			fs_enet_data.napi_weight = 17;
+-			fs_enet_data.mem_offset = FCC_MEM_OFFSET(fcc_index);
+-			fs_enet_data.cp_page = CPM_CR_FCC_PAGE(fcc_index);
+-			fs_enet_data.cp_block = CPM_CR_FCC_SBLOCK(fcc_index);
+-
+-			snprintf((char*)&bus_id[(*id)], BUS_ID_SIZE, "%x:%02x",
+-							(u32)res.start, fs_enet_data.phy_addr);
+-			fs_enet_data.bus_id = (char*)&bus_id[(*id)];
+-			fs_enet_data.init_ioports = init_fcc_ioports;
+-
+-			mdio_bb_prop = of_get_property(phy, "bitbang", NULL);
+-			if (mdio_bb_prop) {
+-				struct platform_device *fs_enet_mdio_bb_dev;
+-				struct fs_mii_bb_platform_info fs_enet_mdio_bb_data;
+-
+-				fs_enet_mdio_bb_dev =
+-					platform_device_register_simple("fsl-bb-mdio",
+-							i, NULL, 0);
+-				memset(&fs_enet_mdio_bb_data, 0,
+-						sizeof(struct fs_mii_bb_platform_info));
+-				fs_enet_mdio_bb_data.mdio_dat.bit =
+-					mdio_bb_prop[0];
+-				fs_enet_mdio_bb_data.mdio_dir.bit =
+-					mdio_bb_prop[1];
+-				fs_enet_mdio_bb_data.mdc_dat.bit =
+-					mdio_bb_prop[2];
+-				fs_enet_mdio_bb_data.mdio_port =
+-					mdio_bb_prop[3];
+-				fs_enet_mdio_bb_data.mdc_port =
+-					mdio_bb_prop[4];
+-				fs_enet_mdio_bb_data.delay =
+-					mdio_bb_prop[5];
+-
+-				fs_enet_mdio_bb_data.irq[0] = phy_irq[0];
+-				fs_enet_mdio_bb_data.irq[1] = -1;
+-				fs_enet_mdio_bb_data.irq[2] = -1;
+-				fs_enet_mdio_bb_data.irq[3] = phy_irq[0];
+-				fs_enet_mdio_bb_data.irq[31] = -1;
+-
+-				fs_enet_mdio_bb_data.mdio_dat.offset =
+-					(u32)&cpm2_immr->im_ioport.iop_pdatc;
+-				fs_enet_mdio_bb_data.mdio_dir.offset =
+-					(u32)&cpm2_immr->im_ioport.iop_pdirc;
+-				fs_enet_mdio_bb_data.mdc_dat.offset =
+-					(u32)&cpm2_immr->im_ioport.iop_pdatc;
+-
+-				ret = platform_device_add_data(
+-						fs_enet_mdio_bb_dev,
+-						&fs_enet_mdio_bb_data,
+-						sizeof(struct fs_mii_bb_platform_info));
+-				if (ret)
+-					goto unreg;
+-			}
+-
+-			of_node_put(phy);
+-			of_node_put(mdio);
+-
+-			ret = platform_device_add_data(fs_enet_dev, &fs_enet_data,
+-						     sizeof(struct
+-							    fs_platform_info));
+-			if (ret)
+-				goto unreg;
+-		}
+-	}
+-	return 0;
+-
+-unreg:
+-	platform_device_unregister(fs_enet_dev);
+-err:
+-	return ret;
+-}
+-
+-arch_initcall(fs_enet_of_init);
+-
+-static const char scc_regs[] = "regs";
+-static const char scc_pram[] = "pram";
+-
+-static int __init cpm_uart_of_init(void)
+-{
+-	struct device_node *np;
+-	unsigned int i;
+-	struct platform_device *cpm_uart_dev;
+-	int ret;
+-
+-	for (np = NULL, i = 0;
+-	     (np = of_find_compatible_node(np, "serial", "cpm_uart")) != NULL;
+-	     i++) {
+-		struct resource r[3];
+-		struct fs_uart_platform_info cpm_uart_data;
+-		const int *id;
+-		const char *model;
+-
+-		memset(r, 0, sizeof(r));
+-		memset(&cpm_uart_data, 0, sizeof(cpm_uart_data));
+-
+-		ret = of_address_to_resource(np, 0, &r[0]);
+-		if (ret)
+-			goto err;
+-
+-		r[0].name = scc_regs;
+-
+-		ret = of_address_to_resource(np, 1, &r[1]);
+-		if (ret)
+-			goto err;
+-		r[1].name = scc_pram;
+-
+-		of_irq_to_resource(np, 0, &r[2]);
+-
+-		cpm_uart_dev =
+-		    platform_device_register_simple("fsl-cpm-scc:uart", i, &r[0], 3);
+-
+-		if (IS_ERR(cpm_uart_dev)) {
+-			ret = PTR_ERR(cpm_uart_dev);
+-			goto err;
+-		}
+-
+-		id = of_get_property(np, "device-id", NULL);
+-		cpm_uart_data.fs_no = *id;
+-
+-		model = of_get_property(np, "model", NULL);
+-		strcpy(cpm_uart_data.fs_type, model);
+-
+-		cpm_uart_data.uart_clk = ppc_proc_freq;
+-
+-		cpm_uart_data.tx_num_fifo = 4;
+-		cpm_uart_data.tx_buf_size = 32;
+-		cpm_uart_data.rx_num_fifo = 4;
+-		cpm_uart_data.rx_buf_size = 32;
+-		cpm_uart_data.clk_rx = *((u32 *)of_get_property(np,
+-						"rx-clock", NULL));
+-		cpm_uart_data.clk_tx = *((u32 *)of_get_property(np,
+-						"tx-clock", NULL));
+-
+-		ret =
+-		    platform_device_add_data(cpm_uart_dev, &cpm_uart_data,
+-					     sizeof(struct
+-						    fs_uart_platform_info));
+-		if (ret)
+-			goto unreg;
+-	}
+-
+-	return 0;
+-
+-unreg:
+-	platform_device_unregister(cpm_uart_dev);
+-err:
+-	return ret;
+-}
+-
+-arch_initcall(cpm_uart_of_init);
+-#endif /* CONFIG_CPM2 */
+-
+-#ifdef CONFIG_8xx
+-
+-extern void init_scc_ioports(struct fs_platform_info*);
+-extern int platform_device_skip(const char *model, int id);
+-
+-static int __init fs_enet_mdio_of_init(void)
+-{
+-	struct device_node *np;
+-	unsigned int i;
+-	struct platform_device *mdio_dev;
+-	struct resource res;
+-	int ret;
+-
+-	for (np = NULL, i = 0;
+-	     (np = of_find_compatible_node(np, "mdio", "fs_enet")) != NULL;
+-	     i++) {
+-		struct fs_mii_fec_platform_info mdio_data;
+-
+-		memset(&res, 0, sizeof(res));
+-		memset(&mdio_data, 0, sizeof(mdio_data));
+-
+-		ret = of_address_to_resource(np, 0, &res);
+-		if (ret)
+-			goto err;
+-
+-		mdio_dev =
+-		    platform_device_register_simple("fsl-cpm-fec-mdio",
+-						    res.start, &res, 1);
+-		if (IS_ERR(mdio_dev)) {
+-			ret = PTR_ERR(mdio_dev);
+-			goto err;
+-		}
+-
+-		mdio_data.mii_speed = ((((ppc_proc_freq + 4999999) / 2500000) / 2) & 0x3F) << 1;
+-
+-		ret =
+-		    platform_device_add_data(mdio_dev, &mdio_data,
+-					     sizeof(struct fs_mii_fec_platform_info));
+-		if (ret)
+-			goto unreg;
+-	}
+-	return 0;
+-
+-unreg:
+-	platform_device_unregister(mdio_dev);
+-err:
+-	return ret;
+-}
+-
+-arch_initcall(fs_enet_mdio_of_init);
+-
+-static const char *enet_regs = "regs";
+-static const char *enet_pram = "pram";
+-static const char *enet_irq = "interrupt";
+-static char bus_id[9][BUS_ID_SIZE];
+-
+-static int __init fs_enet_of_init(void)
+-{
+-	struct device_node *np;
+-	unsigned int i;
+-	struct platform_device *fs_enet_dev = NULL;
+-	struct resource res;
+-	int ret;
+-
+-	for (np = NULL, i = 0;
+-	     (np = of_find_compatible_node(np, "network", "fs_enet")) != NULL;
+-	     i++) {
+-		struct resource r[4];
+-		struct device_node *phy = NULL, *mdio = NULL;
+-		struct fs_platform_info fs_enet_data;
+-		const unsigned int *id;
+-		const unsigned int *phy_addr;
+-		const void *mac_addr;
+-		const phandle *ph;
+-		const char *model;
+-
+-		memset(r, 0, sizeof(r));
+-		memset(&fs_enet_data, 0, sizeof(fs_enet_data));
+-
+-		model = of_get_property(np, "model", NULL);
+-		if (model == NULL) {
+-			ret = -ENODEV;
+-			goto unreg;
+-		}
+-
+-		id = of_get_property(np, "device-id", NULL);
+-		fs_enet_data.fs_no = *id;
+-
+-		if (platform_device_skip(model, *id))
+-			continue;
+-
+-		ret = of_address_to_resource(np, 0, &r[0]);
+-		if (ret)
+-			goto err;
+-		r[0].name = enet_regs;
+-
+-		mac_addr = of_get_mac_address(np);
+-		if (mac_addr)
+-			memcpy(fs_enet_data.macaddr, mac_addr, 6);
+-
+-		ph = of_get_property(np, "phy-handle", NULL);
+-		if (ph != NULL)
+-			phy = of_find_node_by_phandle(*ph);
+-
+-		if (phy != NULL) {
+-			phy_addr = of_get_property(phy, "reg", NULL);
+-			fs_enet_data.phy_addr = *phy_addr;
+-			fs_enet_data.has_phy = 1;
+-
+-			mdio = of_get_parent(phy);
+-			ret = of_address_to_resource(mdio, 0, &res);
+-			if (ret) {
+-				of_node_put(phy);
+-				of_node_put(mdio);
+-                                goto unreg;
+-			}
+-		}
+-
+-		model = of_get_property(np, "model", NULL);
+-		strcpy(fs_enet_data.fs_type, model);
+-
+-		if (strstr(model, "FEC")) {
+-			r[1].start = r[1].end = irq_of_parse_and_map(np, 0);
+-			r[1].flags = IORESOURCE_IRQ;
+-			r[1].name = enet_irq;
+-
+-			fs_enet_dev =
+-				    platform_device_register_simple("fsl-cpm-fec", i, &r[0], 2);
+-
+-			if (IS_ERR(fs_enet_dev)) {
+-				ret = PTR_ERR(fs_enet_dev);
+-				goto err;
+-			}
+-
+-			fs_enet_data.rx_ring = 128;
+-			fs_enet_data.tx_ring = 16;
+-			fs_enet_data.rx_copybreak = 240;
+-			fs_enet_data.use_napi = 1;
+-			fs_enet_data.napi_weight = 17;
+-
+-			snprintf((char*)&bus_id[i], BUS_ID_SIZE, "%x:%02x",
+-							(u32)res.start, fs_enet_data.phy_addr);
+-			fs_enet_data.bus_id = (char*)&bus_id[i];
+-			fs_enet_data.init_ioports = init_fec_ioports;
+-		}
+-		if (strstr(model, "SCC")) {
+-			ret = of_address_to_resource(np, 1, &r[1]);
+-			if (ret)
+-				goto err;
+-			r[1].name = enet_pram;
+-
+-			r[2].start = r[2].end = irq_of_parse_and_map(np, 0);
+-			r[2].flags = IORESOURCE_IRQ;
+-			r[2].name = enet_irq;
+-
+-			fs_enet_dev =
+-				    platform_device_register_simple("fsl-cpm-scc", i, &r[0], 3);
+-
+-			if (IS_ERR(fs_enet_dev)) {
+-				ret = PTR_ERR(fs_enet_dev);
+-				goto err;
+-			}
+-
+-			fs_enet_data.rx_ring = 64;
+-			fs_enet_data.tx_ring = 8;
+-			fs_enet_data.rx_copybreak = 240;
+-			fs_enet_data.use_napi = 1;
+-			fs_enet_data.napi_weight = 17;
+-
+-			snprintf((char*)&bus_id[i], BUS_ID_SIZE, "%s", "fixed@10:1");
+-                        fs_enet_data.bus_id = (char*)&bus_id[i];
+-			fs_enet_data.init_ioports = init_scc_ioports;
+-		}
+-
+-		of_node_put(phy);
+-		of_node_put(mdio);
+-
+-		ret = platform_device_add_data(fs_enet_dev, &fs_enet_data,
+-					     sizeof(struct
+-						    fs_platform_info));
+-		if (ret)
+-			goto unreg;
+-	}
+-	return 0;
+-
+-unreg:
+-	platform_device_unregister(fs_enet_dev);
+-err:
+-	return ret;
+-}
+-
+-arch_initcall(fs_enet_of_init);
+-
+-static int __init fsl_pcmcia_of_init(void)
+-{
+-	struct device_node *np;
+-	/*
+-	 * Register all the devices which type is "pcmcia"
+-	 */
+-	for_each_compatible_node(np, "pcmcia", "fsl,pq-pcmcia")
+-		of_platform_device_create(np, "m8xx-pcmcia", NULL);
+-	return 0;
+-}
+-
+-arch_initcall(fsl_pcmcia_of_init);
+-
+-static const char *smc_regs = "regs";
+-static const char *smc_pram = "pram";
+-
+-static int __init cpm_smc_uart_of_init(void)
+-{
+-	struct device_node *np;
+-	unsigned int i;
+-	struct platform_device *cpm_uart_dev;
+-	int ret;
+-
+-	for (np = NULL, i = 0;
+-	     (np = of_find_compatible_node(np, "serial", "cpm_uart")) != NULL;
+-	     i++) {
+-		struct resource r[3];
+-		struct fs_uart_platform_info cpm_uart_data;
+-		const int *id;
+-		const char *model;
+-
+-		memset(r, 0, sizeof(r));
+-		memset(&cpm_uart_data, 0, sizeof(cpm_uart_data));
+-
+-		ret = of_address_to_resource(np, 0, &r[0]);
+-		if (ret)
+-			goto err;
+-
+-		r[0].name = smc_regs;
+-
+-		ret = of_address_to_resource(np, 1, &r[1]);
+-		if (ret)
+-			goto err;
+-		r[1].name = smc_pram;
+-
+-		r[2].start = r[2].end = irq_of_parse_and_map(np, 0);
+-		r[2].flags = IORESOURCE_IRQ;
+-
+-		cpm_uart_dev =
+-		    platform_device_register_simple("fsl-cpm-smc:uart", i, &r[0], 3);
+-
+-		if (IS_ERR(cpm_uart_dev)) {
+-			ret = PTR_ERR(cpm_uart_dev);
+-			goto err;
+-		}
+-
+-		model = of_get_property(np, "model", NULL);
+-		strcpy(cpm_uart_data.fs_type, model);
+-
+-		id = of_get_property(np, "device-id", NULL);
+-		cpm_uart_data.fs_no = *id;
+-		cpm_uart_data.uart_clk = ppc_proc_freq;
+-
+-		cpm_uart_data.tx_num_fifo = 4;
+-		cpm_uart_data.tx_buf_size = 32;
+-		cpm_uart_data.rx_num_fifo = 4;
+-		cpm_uart_data.rx_buf_size = 32;
+-
+-		ret =
+-		    platform_device_add_data(cpm_uart_dev, &cpm_uart_data,
+-					     sizeof(struct
+-						    fs_uart_platform_info));
+-		if (ret)
+-			goto unreg;
+-	}
+-
+-	return 0;
+-
+-unreg:
+-	platform_device_unregister(cpm_uart_dev);
+-err:
+-	return ret;
+-}
+-
+-arch_initcall(cpm_smc_uart_of_init);
+-
+-#endif /* CONFIG_8xx */
+-#endif /* CONFIG_PPC_CPM_NEW_BINDING */
+-
+ static int __init of_fsl_spi_probe(char *type, char *compatible, u32 sysclk,
+ 				   struct spi_board_info *board_infos,
+ 				   unsigned int num_board_infos,
+@@ -1371,25 +840,9 @@ int __init fsl_spi_init(struct spi_board
+ 	sysclk = get_brgfreq();
+ #endif
+ 	if (sysclk == -1) {
+-		struct device_node *np;
+-		const u32 *freq;
+-		int size;
+-
+-		np = of_find_node_by_type(NULL, "soc");
+-		if (!np)
++		sysclk = fsl_get_sys_freq();
++		if (sysclk == -1)
+ 			return -ENODEV;
+-
+-		freq = of_get_property(np, "clock-frequency", &size);
+-		if (!freq || size != sizeof(*freq) || *freq == 0) {
+-			freq = of_get_property(np, "bus-frequency", &size);
+-			if (!freq || size != sizeof(*freq) || *freq == 0) {
+-				of_node_put(np);
+-				return -ENODEV;
+-			}
+-		}
+-
+-		sysclk = *freq;
+-		of_node_put(np);
+ 	}
+ 
+ 	ret = of_fsl_spi_probe(NULL, "fsl,spi", sysclk, board_infos,
+--- a/arch/powerpc/sysdev/fsl_soc.h
++++ b/arch/powerpc/sysdev/fsl_soc.h
+@@ -7,6 +7,7 @@
+ extern phys_addr_t get_immrbase(void);
+ extern u32 get_brgfreq(void);
+ extern u32 get_baudrate(void);
++extern u32 fsl_get_sys_freq(void);
+ 
+ struct spi_board_info;
+ 
+--- a/arch/powerpc/sysdev/mpic.c
++++ b/arch/powerpc/sysdev/mpic.c
+@@ -175,13 +175,16 @@ static inline void _mpic_write(enum mpic
+ 	switch(type) {
+ #ifdef CONFIG_PPC_DCR
+ 	case mpic_access_dcr:
+-		return dcr_write(rb->dhost, reg, value);
++		dcr_write(rb->dhost, reg, value);
++		break;
+ #endif
+ 	case mpic_access_mmio_be:
+-		return out_be32(rb->base + (reg >> 2), value);
++		out_be32(rb->base + (reg >> 2), value);
++		break;
+ 	case mpic_access_mmio_le:
+ 	default:
+-		return out_le32(rb->base + (reg >> 2), value);
++		out_le32(rb->base + (reg >> 2), value);
++		break;
+ 	}
+ }
+ 
+@@ -1000,7 +1003,7 @@ struct mpic * __init mpic_alloc(struct d
+ 				const char *name)
+ {
+ 	struct mpic	*mpic;
+-	u32		reg;
++	u32		greg_feature;
+ 	const char	*vers;
+ 	int		i;
+ 	int		intvec_top;
+@@ -1064,7 +1067,8 @@ struct mpic * __init mpic_alloc(struct d
+ 
+ 	/* Look for protected sources */
+ 	if (node) {
+-		unsigned int psize, bits, mapsize;
++		int psize;
++		unsigned int bits, mapsize;
+ 		const u32 *psrc =
+ 			of_get_property(node, "protected-sources", &psize);
+ 		if (psrc) {
+@@ -1107,8 +1111,7 @@ struct mpic * __init mpic_alloc(struct d
+ 	 * in, try to obtain one
+ 	 */
+ 	if (paddr == 0 && !(mpic->flags & MPIC_USES_DCR)) {
+-		const u32 *reg;
+-		reg = of_get_property(node, "reg", NULL);
++		const u32 *reg = of_get_property(node, "reg", NULL);
+ 		BUG_ON(reg == NULL);
+ 		paddr = of_translate_address(node, reg);
+ 		BUG_ON(paddr == OF_BAD_ADDR);
+@@ -1137,12 +1140,13 @@ struct mpic * __init mpic_alloc(struct d
+ 	 * MPICs, num sources as well. On ISU MPICs, sources are counted
+ 	 * as ISUs are added
+ 	 */
+-	reg = mpic_read(mpic->gregs, MPIC_INFO(GREG_FEATURE_0));
+-	mpic->num_cpus = ((reg & MPIC_GREG_FEATURE_LAST_CPU_MASK)
++	greg_feature = mpic_read(mpic->gregs, MPIC_INFO(GREG_FEATURE_0));
++	mpic->num_cpus = ((greg_feature & MPIC_GREG_FEATURE_LAST_CPU_MASK)
+ 			  >> MPIC_GREG_FEATURE_LAST_CPU_SHIFT) + 1;
+ 	if (isu_size == 0)
+-		mpic->num_sources = ((reg & MPIC_GREG_FEATURE_LAST_SRC_MASK)
+-				     >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1;
++		mpic->num_sources =
++			((greg_feature & MPIC_GREG_FEATURE_LAST_SRC_MASK)
++			 >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1;
+ 
+ 	/* Map the per-CPU registers */
+ 	for (i = 0; i < mpic->num_cpus; i++) {
+@@ -1161,7 +1165,7 @@ struct mpic * __init mpic_alloc(struct d
+ 	mpic->isu_mask = (1 << mpic->isu_shift) - 1;
+ 
+ 	/* Display version */
+-	switch (reg & MPIC_GREG_FEATURE_VERSION_MASK) {
++	switch (greg_feature & MPIC_GREG_FEATURE_VERSION_MASK) {
+ 	case 1:
+ 		vers = "1.0";
+ 		break;
+@@ -1321,7 +1325,7 @@ void __init mpic_set_serial_int(struct m
+ 
+ void mpic_irq_set_priority(unsigned int irq, unsigned int pri)
+ {
+-	int is_ipi;
++	unsigned int is_ipi;
+ 	struct mpic *mpic = mpic_find(irq, &is_ipi);
+ 	unsigned int src = mpic_irq_to_hw(irq);
+ 	unsigned long flags;
+@@ -1344,7 +1348,7 @@ void mpic_irq_set_priority(unsigned int 
+ 
+ unsigned int mpic_irq_get_priority(unsigned int irq)
+ {
+-	int is_ipi;
++	unsigned int is_ipi;
+ 	struct mpic *mpic = mpic_find(irq, &is_ipi);
+ 	unsigned int src = mpic_irq_to_hw(irq);
+ 	unsigned long flags;
+@@ -1406,11 +1410,6 @@ void mpic_cpu_set_priority(int prio)
+ 	mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), prio);
+ }
+ 
+-/*
+- * XXX: someone who knows mpic should check this.
+- * do we need to eoi the ipi including for kexec cpu here (see xics comments)?
+- * or can we reset the mpic in the new kernel?
+- */
+ void mpic_teardown_this_cpu(int secondary)
+ {
+ 	struct mpic *mpic = mpic_primary;
+@@ -1430,6 +1429,10 @@ void mpic_teardown_this_cpu(int secondar
+ 
+ 	/* Set current processor priority to max */
+ 	mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0xf);
++	/* We need to EOI the IPI since not all platforms reset the MPIC
++	 * on boot and new interrupts wouldn't get delivered otherwise.
++	 */
++	mpic_eoi(mpic);
+ 
+ 	spin_unlock_irqrestore(&mpic_lock, flags);
+ }
+--- a/arch/powerpc/sysdev/mv64x60_dev.c
++++ b/arch/powerpc/sysdev/mv64x60_dev.c
+@@ -127,7 +127,7 @@ static int __init mv64x60_mpsc_device_se
+ 	if (err)
+ 		return err;
+ 
+-	prop = of_get_property(np, "block-index", NULL);
++	prop = of_get_property(np, "cell-index", NULL);
+ 	if (!prop)
+ 		return -ENODEV;
+ 	port_number = *(int *)prop;
+@@ -136,6 +136,7 @@ static int __init mv64x60_mpsc_device_se
+ 
+ 	pdata.cache_mgmt = 1; /* All current revs need this set */
+ 
++	pdata.max_idle = 40; /* default */
+ 	prop = of_get_property(np, "max_idle", NULL);
+ 	if (prop)
+ 		pdata.max_idle = *prop;
+@@ -205,30 +206,24 @@ error:
+ /*
+  * Create mv64x60_eth platform devices
+  */
+-static int __init eth_register_shared_pdev(struct device_node *np)
++static struct platform_device * __init mv64x60_eth_register_shared_pdev(
++						struct device_node *np, int id)
+ {
+ 	struct platform_device *pdev;
+ 	struct resource r[1];
+ 	int err;
+ 
+-	np = of_get_parent(np);
+-	if (!np)
+-		return -ENODEV;
+-
+ 	err = of_address_to_resource(np, 0, &r[0]);
+-	of_node_put(np);
+ 	if (err)
+-		return err;
++		return ERR_PTR(err);
+ 
+-	pdev = platform_device_register_simple(MV643XX_ETH_SHARED_NAME, 0,
++	pdev = platform_device_register_simple(MV643XX_ETH_SHARED_NAME, id,
+ 					       r, 1);
+-	if (IS_ERR(pdev))
+-		return PTR_ERR(pdev);
+-
+-	return 0;
++	return pdev;
+ }
+ 
+-static int __init mv64x60_eth_device_setup(struct device_node *np, int id)
++static int __init mv64x60_eth_device_setup(struct device_node *np, int id,
++					   struct platform_device *shared_pdev)
+ {
+ 	struct resource r[1];
+ 	struct mv643xx_eth_platform_data pdata;
+@@ -239,16 +234,12 @@ static int __init mv64x60_eth_device_set
+ 	const phandle *ph;
+ 	int err;
+ 
+-	/* only register the shared platform device the first time through */
+-	if (id == 0 && (err = eth_register_shared_pdev(np)))
+-		return err;
+-
+ 	memset(r, 0, sizeof(r));
+ 	of_irq_to_resource(np, 0, &r[0]);
+ 
+ 	memset(&pdata, 0, sizeof(pdata));
+ 
+-	prop = of_get_property(np, "block-index", NULL);
++	prop = of_get_property(np, "reg", NULL);
+ 	if (!prop)
+ 		return -ENODEV;
+ 	pdata.port_number = *prop;
+@@ -301,7 +292,7 @@ static int __init mv64x60_eth_device_set
+ 
+ 	of_node_put(phy);
+ 
+-	pdev = platform_device_alloc(MV643XX_ETH_NAME, pdata.port_number);
++	pdev = platform_device_alloc(MV643XX_ETH_NAME, id);
+ 	if (!pdev)
+ 		return -ENOMEM;
+ 
+@@ -345,21 +336,19 @@ static int __init mv64x60_i2c_device_set
+ 
+ 	memset(&pdata, 0, sizeof(pdata));
+ 
++	pdata.freq_m = 8;	/* default */
+ 	prop = of_get_property(np, "freq_m", NULL);
+ 	if (!prop)
+ 		return -ENODEV;
+ 	pdata.freq_m = *prop;
+ 
++	pdata.freq_m = 3;	/* default */
+ 	prop = of_get_property(np, "freq_n", NULL);
+ 	if (!prop)
+ 		return -ENODEV;
+ 	pdata.freq_n = *prop;
+ 
+-	prop = of_get_property(np, "timeout", NULL);
+-	if (prop)
+-		pdata.timeout = *prop;
+-	else
+-		pdata.timeout = 1000;	/* 1 second */
++	pdata.timeout = 1000;				/* default: 1 second */
+ 
+ 	pdev = platform_device_alloc(MV64XXX_I2C_CTLR_NAME, id);
+ 	if (!pdev)
+@@ -401,10 +390,7 @@ static int __init mv64x60_wdt_device_set
+ 
+ 	memset(&pdata, 0, sizeof(pdata));
+ 
+-	prop = of_get_property(np, "timeout", NULL);
+-	if (!prop)
+-		return -ENODEV;
+-	pdata.timeout = *prop;
++	pdata.timeout = 10;			/* Default: 10 seconds */
+ 
+ 	np = of_get_parent(np);
+ 	if (!np)
+@@ -441,27 +427,43 @@ error:
+ 
+ static int __init mv64x60_device_setup(void)
+ {
+-	struct device_node *np = NULL;
+-	int id;
++	struct device_node *np, *np2;
++	struct platform_device *pdev;
++	int id, id2;
+ 	int err;
+ 
+ 	id = 0;
+-	for_each_compatible_node(np, "serial", "marvell,mpsc")
++	for_each_compatible_node(np, "serial", "marvell,mv64360-mpsc")
+ 		if ((err = mv64x60_mpsc_device_setup(np, id++)))
+ 			goto error;
+ 
+ 	id = 0;
+-	for_each_compatible_node(np, "network", "marvell,mv64x60-eth")
+-		if ((err = mv64x60_eth_device_setup(np, id++)))
++	id2 = 0;
++	for_each_compatible_node(np, NULL, "marvell,mv64360-eth-group") {
++		pdev = mv64x60_eth_register_shared_pdev(np, id++);
++		if (IS_ERR(pdev)) {
++			err = PTR_ERR(pdev);
+ 			goto error;
++		}
++		for_each_child_of_node(np, np2) {
++			if (!of_device_is_compatible(np2,
++					"marvell,mv64360-eth"))
++				continue;
++			err = mv64x60_eth_device_setup(np2, id2++, pdev);
++			if (err) {
++				of_node_put(np2);
++				goto error;
++			}
++		}
++	}
+ 
+ 	id = 0;
+-	for_each_compatible_node(np, "i2c", "marvell,mv64x60-i2c")
++	for_each_compatible_node(np, "i2c", "marvell,mv64360-i2c")
+ 		if ((err = mv64x60_i2c_device_setup(np, id++)))
+ 			goto error;
+ 
+ 	/* support up to one watchdog timer */
+-	np = of_find_compatible_node(np, NULL, "marvell,mv64x60-wdt");
++	np = of_find_compatible_node(np, NULL, "marvell,mv64360-wdt");
+ 	if (np) {
+ 		if ((err = mv64x60_wdt_device_setup(np, id)))
+ 			goto error;
+@@ -489,10 +491,10 @@ static int __init mv64x60_add_mpsc_conso
+ 	if (!np)
+ 		goto not_mpsc;
+ 
+-	if (!of_device_is_compatible(np, "marvell,mpsc"))
++	if (!of_device_is_compatible(np, "marvell,mv64360-mpsc"))
+ 		goto not_mpsc;
+ 
+-	prop = of_get_property(np, "block-index", NULL);
++	prop = of_get_property(np, "cell-index", NULL);
+ 	if (!prop)
+ 		goto not_mpsc;
+ 
+--- a/arch/powerpc/sysdev/mv64x60_pci.c
++++ b/arch/powerpc/sysdev/mv64x60_pci.c
+@@ -86,14 +86,14 @@ static int __init mv64x60_sysfs_init(voi
+ 	struct platform_device *pdev;
+ 	const unsigned int *prop;
+ 
+-	np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60");
++	np = of_find_compatible_node(NULL, NULL, "marvell,mv64360");
+ 	if (!np)
+ 		return 0;
+ 
+ 	prop = of_get_property(np, "hs_reg_valid", NULL);
+ 	of_node_put(np);
+ 
+-	pdev = platform_device_register_simple("marvell,mv64x60", 0, NULL, 0);
++	pdev = platform_device_register_simple("marvell,mv64360", 0, NULL, 0);
+ 	if (IS_ERR(pdev))
+ 		return PTR_ERR(pdev);
+ 
+@@ -166,6 +166,6 @@ void __init mv64x60_pci_init(void)
+ {
+ 	struct device_node *np;
+ 
+-	for_each_compatible_node(np, "pci", "marvell,mv64x60-pci")
++	for_each_compatible_node(np, "pci", "marvell,mv64360-pci")
+ 		mv64x60_add_bridge(np);
+ }
+--- a/arch/powerpc/sysdev/mv64x60_pic.c
++++ b/arch/powerpc/sysdev/mv64x60_pic.c
+@@ -238,13 +238,13 @@ void __init mv64x60_init_irq(void)
+ 	const unsigned int *reg;
+ 	unsigned long flags;
+ 
+-	np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-gpp");
++	np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp");
+ 	reg = of_get_property(np, "reg", &size);
+ 	paddr = of_translate_address(np, reg);
+ 	mv64x60_gpp_reg_base = ioremap(paddr, reg[1]);
+ 	of_node_put(np);
+ 
+-	np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-pic");
++	np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-pic");
+ 	reg = of_get_property(np, "reg", &size);
+ 	paddr = of_translate_address(np, reg);
+ 	mv64x60_irq_reg_base = ioremap(paddr, reg[1]);
+--- a/arch/powerpc/sysdev/mv64x60_udbg.c
++++ b/arch/powerpc/sysdev/mv64x60_udbg.c
+@@ -85,7 +85,7 @@ static void mv64x60_udbg_init(void)
+ 	if (!stdout)
+ 		return;
+ 
+-	for_each_compatible_node(np, "serial", "marvell,mpsc") {
++	for_each_compatible_node(np, "serial", "marvell,mv64360-mpsc") {
+ 		if (np == stdout)
+ 			break;
+ 	}
+--- a/arch/powerpc/sysdev/ppc4xx_pci.c
++++ b/arch/powerpc/sysdev/ppc4xx_pci.c
+@@ -527,6 +527,7 @@ static void __init ppc4xx_probe_pcix_bri
+  *
+  * ibm,plb-pciex-440spe
+  * ibm,plb-pciex-405ex
++ * ibm,plb-pciex-460ex
+  *
+  * Anything else will be rejected for now as they are all subtly
+  * different unfortunately.
+@@ -645,7 +646,7 @@ static int __init ppc440spe_pciex_core_i
+ 	int time_out = 20;
+ 
+ 	/* Set PLL clock receiver to LVPECL */
+-	mtdcri(SDR0, PESDR0_PLLLCT1, mfdcri(SDR0, PESDR0_PLLLCT1) | 1 << 28);
++	dcri_clrset(SDR0, PESDR0_PLLLCT1, 0, 1 << 28);
+ 
+ 	/* Shouldn't we do all the calibration stuff etc... here ? */
+ 	if (ppc440spe_pciex_check_reset(np))
+@@ -659,8 +660,7 @@ static int __init ppc440spe_pciex_core_i
+ 	}
+ 
+ 	/* De-assert reset of PCIe PLL, wait for lock */
+-	mtdcri(SDR0, PESDR0_PLLLCT1,
+-	       mfdcri(SDR0, PESDR0_PLLLCT1) & ~(1 << 24));
++	dcri_clrset(SDR0, PESDR0_PLLLCT1, 1 << 24, 0);
+ 	udelay(3);
+ 
+ 	while (time_out) {
+@@ -712,9 +712,8 @@ static int ppc440spe_pciex_init_port_hw(
+ 		mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL7SET1,
+ 		       0x35000000);
+ 	}
+-	val = mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET);
+-	mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+-	       (val & ~(1 << 24 | 1 << 16)) | 1 << 12);
++	dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET,
++			(1 << 24) | (1 << 16), 1 << 12);
+ 
+ 	return 0;
+ }
+@@ -775,6 +774,115 @@ static struct ppc4xx_pciex_hwops ppc440s
+ 	.setup_utl	= ppc440speB_pciex_init_utl,
+ };
+ 
++static int __init ppc460ex_pciex_core_init(struct device_node *np)
++{
++	/* Nothing to do, return 2 ports */
++	return 2;
++}
++
++static int ppc460ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
++{
++	u32 val;
++	u32 utlset1;
++
++	if (port->endpoint)
++		val = PTYPE_LEGACY_ENDPOINT << 20;
++	else
++		val = PTYPE_ROOT_PORT << 20;
++
++	if (port->index == 0) {
++		val |= LNKW_X1 << 12;
++		utlset1 = 0x20000000;
++	} else {
++		val |= LNKW_X4 << 12;
++		utlset1 = 0x20101101;
++	}
++
++	mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET, val);
++	mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, utlset1);
++	mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x01210000);
++
++	switch (port->index) {
++	case 0:
++		mtdcri(SDR0, PESDR0_460EX_L0CDRCTL, 0x00003230);
++		mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000136);
++		mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006);
++
++		mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST,0x10000000);
++		break;
++
++	case 1:
++		mtdcri(SDR0, PESDR1_460EX_L0CDRCTL, 0x00003230);
++		mtdcri(SDR0, PESDR1_460EX_L1CDRCTL, 0x00003230);
++		mtdcri(SDR0, PESDR1_460EX_L2CDRCTL, 0x00003230);
++		mtdcri(SDR0, PESDR1_460EX_L3CDRCTL, 0x00003230);
++		mtdcri(SDR0, PESDR1_460EX_L0DRV, 0x00000136);
++		mtdcri(SDR0, PESDR1_460EX_L1DRV, 0x00000136);
++		mtdcri(SDR0, PESDR1_460EX_L2DRV, 0x00000136);
++		mtdcri(SDR0, PESDR1_460EX_L3DRV, 0x00000136);
++		mtdcri(SDR0, PESDR1_460EX_L0CLK, 0x00000006);
++		mtdcri(SDR0, PESDR1_460EX_L1CLK, 0x00000006);
++		mtdcri(SDR0, PESDR1_460EX_L2CLK, 0x00000006);
++		mtdcri(SDR0, PESDR1_460EX_L3CLK, 0x00000006);
++
++		mtdcri(SDR0, PESDR1_460EX_PHY_CTL_RST,0x10000000);
++		break;
++	}
++
++	mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
++	       mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) |
++	       (PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTPYN));
++
++	/* Poll for PHY reset */
++	/* XXX FIXME add timeout */
++	switch (port->index) {
++	case 0:
++		while (!(mfdcri(SDR0, PESDR0_460EX_RSTSTA) & 0x1))
++			udelay(10);
++		break;
++	case 1:
++		while (!(mfdcri(SDR0, PESDR1_460EX_RSTSTA) & 0x1))
++			udelay(10);
++		break;
++	}
++
++	mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
++	       (mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) &
++		~(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL)) |
++	       PESDRx_RCSSET_RSTPYN);
++
++	port->has_ibpre = 1;
++
++	return 0;
++}
++
++static int ppc460ex_pciex_init_utl(struct ppc4xx_pciex_port *port)
++{
++	dcr_write(port->dcrs, DCRO_PEGPL_SPECIAL, 0x0);
++
++	/*
++	 * Set buffer allocations and then assert VRB and TXE.
++	 */
++	out_be32(port->utl_base + PEUTL_PBCTL,	0x0800000c);
++	out_be32(port->utl_base + PEUTL_OUTTR,	0x08000000);
++	out_be32(port->utl_base + PEUTL_INTR,	0x02000000);
++	out_be32(port->utl_base + PEUTL_OPDBSZ,	0x04000000);
++	out_be32(port->utl_base + PEUTL_PBBSZ,	0x00000000);
++	out_be32(port->utl_base + PEUTL_IPHBSZ,	0x02000000);
++	out_be32(port->utl_base + PEUTL_IPDBSZ,	0x04000000);
++	out_be32(port->utl_base + PEUTL_RCIRQEN,0x00f00000);
++	out_be32(port->utl_base + PEUTL_PCTL,	0x80800066);
++
++	return 0;
++}
++
++static struct ppc4xx_pciex_hwops ppc460ex_pcie_hwops __initdata =
++{
++	.core_init	= ppc460ex_pciex_core_init,
++	.port_init_hw	= ppc460ex_pciex_init_port_hw,
++	.setup_utl	= ppc460ex_pciex_init_utl,
++};
++
+ #endif /* CONFIG_44x */
+ 
+ #ifdef CONFIG_40x
+@@ -830,17 +938,9 @@ static int ppc405ex_pciex_init_port_hw(s
+ 	 * PCIe boards don't show this problem.
+ 	 * This has to be re-tested and fixed in a later release!
+ 	 */
+-#if 0 /* XXX FIXME: Not resetting the PHY will leave all resources
+-       * configured as done previously by U-Boot. Then Linux will currently
+-       * not reassign them. So the PHY reset is now done always. This will
+-       * lead to problems with the Atheros PCIe board again.
+-       */
+ 	val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
+ 	if (!(val & 0x00001000))
+ 		ppc405ex_pcie_phy_reset(port);
+-#else
+-	ppc405ex_pcie_phy_reset(port);
+-#endif
+ 
+ 	dcr_write(port->dcrs, DCRO_PEGPL_CFG, 0x10000000);  /* guarded on */
+ 
+@@ -896,6 +996,8 @@ static int __init ppc4xx_pciex_check_cor
+ 		else
+ 			ppc4xx_pciex_hwops = &ppc440speB_pcie_hwops;
+ 	}
++	if (of_device_is_compatible(np, "ibm,plb-pciex-460ex"))
++		ppc4xx_pciex_hwops = &ppc460ex_pcie_hwops;
+ #endif /* CONFIG_44x    */
+ #ifdef CONFIG_40x
+ 	if (of_device_is_compatible(np, "ibm,plb-pciex-405ex"))
+@@ -1042,8 +1144,7 @@ static int __init ppc4xx_pciex_port_init
+ 		port->link = 0;
+ 	}
+ 
+-	mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+-	       mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) | 1 << 20);
++	dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET, 0, 1 << 20);
+ 	msleep(100);
+ 
+ 	return 0;
+--- a/arch/powerpc/sysdev/ppc4xx_pci.h
++++ b/arch/powerpc/sysdev/ppc4xx_pci.h
+@@ -271,6 +271,59 @@
+ #define PESDR1_405EX_PHYSTA		0x044C
+ 
+ /*
++ * 460EX additional DCRs
++ */
++#define PESDR0_460EX_L0BIST		0x0308
++#define PESDR0_460EX_L0BISTSTS		0x0309
++#define PESDR0_460EX_L0CDRCTL		0x030A
++#define PESDR0_460EX_L0DRV		0x030B
++#define PESDR0_460EX_L0REC		0x030C
++#define PESDR0_460EX_L0LPB		0x030D
++#define PESDR0_460EX_L0CLK		0x030E
++#define PESDR0_460EX_PHY_CTL_RST	0x030F
++#define PESDR0_460EX_RSTSTA		0x0310
++#define PESDR0_460EX_OBS		0x0311
++#define PESDR0_460EX_L0ERRC		0x0320
++
++#define PESDR1_460EX_L0BIST		0x0348
++#define PESDR1_460EX_L1BIST		0x0349
++#define PESDR1_460EX_L2BIST		0x034A
++#define PESDR1_460EX_L3BIST		0x034B
++#define PESDR1_460EX_L0BISTSTS		0x034C
++#define PESDR1_460EX_L1BISTSTS		0x034D
++#define PESDR1_460EX_L2BISTSTS		0x034E
++#define PESDR1_460EX_L3BISTSTS		0x034F
++#define PESDR1_460EX_L0CDRCTL		0x0350
++#define PESDR1_460EX_L1CDRCTL		0x0351
++#define PESDR1_460EX_L2CDRCTL		0x0352
++#define PESDR1_460EX_L3CDRCTL		0x0353
++#define PESDR1_460EX_L0DRV		0x0354
++#define PESDR1_460EX_L1DRV		0x0355
++#define PESDR1_460EX_L2DRV		0x0356
++#define PESDR1_460EX_L3DRV		0x0357
++#define PESDR1_460EX_L0REC		0x0358
++#define PESDR1_460EX_L1REC		0x0359
++#define PESDR1_460EX_L2REC		0x035A
++#define PESDR1_460EX_L3REC		0x035B
++#define PESDR1_460EX_L0LPB		0x035C
++#define PESDR1_460EX_L1LPB		0x035D
++#define PESDR1_460EX_L2LPB		0x035E
++#define PESDR1_460EX_L3LPB		0x035F
++#define PESDR1_460EX_L0CLK		0x0360
++#define PESDR1_460EX_L1CLK		0x0361
++#define PESDR1_460EX_L2CLK		0x0362
++#define PESDR1_460EX_L3CLK		0x0363
++#define PESDR1_460EX_PHY_CTL_RST	0x0364
++#define PESDR1_460EX_RSTSTA		0x0365
++#define PESDR1_460EX_OBS		0x0366
++#define PESDR1_460EX_L0ERRC		0x0368
++#define PESDR1_460EX_L1ERRC		0x0369
++#define PESDR1_460EX_L2ERRC		0x036A
++#define PESDR1_460EX_L3ERRC		0x036B
++#define PESDR0_460EX_IHS1		0x036C
++#define PESDR0_460EX_IHS2		0x036D
++
++/*
+  * Of the above, some are common offsets from the base
+  */
+ #define PESDRn_UTLSET1			0x00
+@@ -353,6 +406,12 @@
+ #define PECFG_POM2LAL		0x390
+ #define PECFG_POM2LAH		0x394
+ 
++/* SDR Bit Mappings */
++#define PESDRx_RCSSET_HLDPLB	0x10000000
++#define PESDRx_RCSSET_RSTGU	0x01000000
++#define PESDRx_RCSSET_RDY       0x00100000
++#define PESDRx_RCSSET_RSTDL     0x00010000
++#define PESDRx_RCSSET_RSTPYN    0x00001000
+ 
+ enum
+ {
+--- /dev/null
++++ b/arch/powerpc/sysdev/ppc4xx_soc.c
+@@ -0,0 +1,200 @@
++/*
++ * IBM/AMCC PPC4xx SoC setup code
++ *
++ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
++ *
++ * L2 cache routines cloned from arch/ppc/syslib/ibm440gx_common.c which is:
++ *   Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
++ *   Copyright (c) 2003 - 2006 Zultys Technologies
++ *
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#include <linux/stddef.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++#include <linux/of_platform.h>
++
++#include <asm/dcr.h>
++#include <asm/dcr-regs.h>
++#include <asm/reg.h>
++
++static u32 dcrbase_l2c;
++
++/*
++ * L2-cache
++ */
++
++/* Issue L2C diagnostic command */
++static inline u32 l2c_diag(u32 addr)
++{
++	mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, addr);
++	mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_DIAG);
++	while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC))
++		;
++
++	return mfdcr(dcrbase_l2c + DCRN_L2C0_DATA);
++}
++
++static irqreturn_t l2c_error_handler(int irq, void *dev)
++{
++	u32 sr = mfdcr(dcrbase_l2c + DCRN_L2C0_SR);
++
++	if (sr & L2C_SR_CPE) {
++		/* Read cache trapped address */
++		u32 addr = l2c_diag(0x42000000);
++		printk(KERN_EMERG "L2C: Cache Parity Error, addr[16:26] = 0x%08x\n",
++		       addr);
++	}
++	if (sr & L2C_SR_TPE) {
++		/* Read tag trapped address */
++		u32 addr = l2c_diag(0x82000000) >> 16;
++		printk(KERN_EMERG "L2C: Tag Parity Error, addr[16:26] = 0x%08x\n",
++		       addr);
++	}
++
++	/* Clear parity errors */
++	if (sr & (L2C_SR_CPE | L2C_SR_TPE)){
++		mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0);
++		mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
++	} else {
++		printk(KERN_EMERG "L2C: LRU error\n");
++	}
++
++	return IRQ_HANDLED;
++}
++
++static int __init ppc4xx_l2c_probe(void)
++{
++	struct device_node *np;
++	u32 r;
++	unsigned long flags;
++	int irq;
++	const u32 *dcrreg;
++	u32 dcrbase_isram;
++	int len;
++	const u32 *prop;
++	u32 l2_size;
++
++	np = of_find_compatible_node(NULL, NULL, "ibm,l2-cache");
++	if (!np)
++		return 0;
++
++	/* Get l2 cache size */
++	prop = of_get_property(np, "cache-size", NULL);
++	if (prop == NULL) {
++		printk(KERN_ERR "%s: Can't get cache-size!\n", np->full_name);
++		of_node_put(np);
++		return -ENODEV;
++	}
++	l2_size = prop[0];
++
++	/* Map DCRs */
++	dcrreg = of_get_property(np, "dcr-reg", &len);
++	if (!dcrreg || (len != 4 * sizeof(u32))) {
++		printk(KERN_ERR "%s: Can't get DCR register base !",
++		       np->full_name);
++		of_node_put(np);
++		return -ENODEV;
++	}
++	dcrbase_isram = dcrreg[0];
++	dcrbase_l2c = dcrreg[2];
++
++	/* Get and map irq number from device tree */
++	irq = irq_of_parse_and_map(np, 0);
++	if (irq == NO_IRQ) {
++		printk(KERN_ERR "irq_of_parse_and_map failed\n");
++		of_node_put(np);
++		return -ENODEV;
++	}
++
++	/* Install error handler */
++	if (request_irq(irq, l2c_error_handler, IRQF_DISABLED, "L2C", 0) < 0) {
++		printk(KERN_ERR "Cannot install L2C error handler"
++		       ", cache is not enabled\n");
++		of_node_put(np);
++		return -ENODEV;
++	}
++
++	local_irq_save(flags);
++	asm volatile ("sync" ::: "memory");
++
++	/* Disable SRAM */
++	mtdcr(dcrbase_isram + DCRN_SRAM0_DPC,
++	      mfdcr(dcrbase_isram + DCRN_SRAM0_DPC) & ~SRAM_DPC_ENABLE);
++	mtdcr(dcrbase_isram + DCRN_SRAM0_SB0CR,
++	      mfdcr(dcrbase_isram + DCRN_SRAM0_SB0CR) & ~SRAM_SBCR_BU_MASK);
++	mtdcr(dcrbase_isram + DCRN_SRAM0_SB1CR,
++	      mfdcr(dcrbase_isram + DCRN_SRAM0_SB1CR) & ~SRAM_SBCR_BU_MASK);
++	mtdcr(dcrbase_isram + DCRN_SRAM0_SB2CR,
++	      mfdcr(dcrbase_isram + DCRN_SRAM0_SB2CR) & ~SRAM_SBCR_BU_MASK);
++	mtdcr(dcrbase_isram + DCRN_SRAM0_SB3CR,
++	      mfdcr(dcrbase_isram + DCRN_SRAM0_SB3CR) & ~SRAM_SBCR_BU_MASK);
++
++	/* Enable L2_MODE without ICU/DCU */
++	r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG) &
++		~(L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_SS_MASK);
++	r |= L2C_CFG_L2M | L2C_CFG_SS_256;
++	mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r);
++
++	mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0);
++
++	/* Hardware Clear Command */
++	mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_HCC);
++	while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC))
++		;
++
++	/* Clear Cache Parity and Tag Errors */
++	mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
++
++	/* Enable 64G snoop region starting at 0 */
++	r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP0) &
++		~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
++	r |= L2C_SNP_SSR_32G | L2C_SNP_ESR;
++	mtdcr(dcrbase_l2c + DCRN_L2C0_SNP0, r);
++
++	r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP1) &
++		~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
++	r |= 0x80000000 | L2C_SNP_SSR_32G | L2C_SNP_ESR;
++	mtdcr(dcrbase_l2c + DCRN_L2C0_SNP1, r);
++
++	asm volatile ("sync" ::: "memory");
++
++	/* Enable ICU/DCU ports */
++	r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG);
++	r &= ~(L2C_CFG_DCW_MASK | L2C_CFG_PMUX_MASK | L2C_CFG_PMIM
++	       | L2C_CFG_TPEI | L2C_CFG_CPEI | L2C_CFG_NAM | L2C_CFG_NBRM);
++	r |= L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_TPC | L2C_CFG_CPC | L2C_CFG_FRAN
++		| L2C_CFG_CPIM | L2C_CFG_TPIM | L2C_CFG_LIM | L2C_CFG_SMCM;
++
++	/* Check for 460EX/GT special handling */
++	if (of_device_is_compatible(np, "ibm,l2-cache-460ex"))
++		r |= L2C_CFG_RDBW;
++
++	mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r);
++
++	asm volatile ("sync; isync" ::: "memory");
++	local_irq_restore(flags);
++
++	printk(KERN_INFO "%dk L2-cache enabled\n", l2_size >> 10);
++
++	of_node_put(np);
++	return 0;
++}
++arch_initcall(ppc4xx_l2c_probe);
++
++/*
++ * At present, this routine just applies a system reset.
++ */
++void ppc4xx_reset_system(char *cmd)
++{
++	mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_RST_SYSTEM);
++	while (1)
++		;	/* Just in case the reset doesn't work */
++}
+--- a/arch/powerpc/sysdev/qe_lib/qe.c
++++ b/arch/powerpc/sysdev/qe_lib/qe.c
+@@ -55,7 +55,7 @@ struct qe_snum {
+ /* We allocate this here because it is used almost exclusively for
+  * the communication processor devices.
+  */
+-struct qe_immap *qe_immr = NULL;
++struct qe_immap __iomem *qe_immr;
+ EXPORT_SYMBOL(qe_immr);
+ 
+ static struct qe_snum snums[QE_NUM_OF_SNUM];	/* Dynamically allocated SNUMs */
+@@ -156,7 +156,7 @@ EXPORT_SYMBOL(qe_issue_cmd);
+  */
+ static unsigned int brg_clk = 0;
+ 
+-unsigned int get_brg_clk(void)
++unsigned int qe_get_brg_clk(void)
+ {
+ 	struct device_node *qe;
+ 	unsigned int size;
+@@ -180,6 +180,7 @@ unsigned int get_brg_clk(void)
+ 
+ 	return brg_clk;
+ }
++EXPORT_SYMBOL(qe_get_brg_clk);
+ 
+ /* Program the BRG to the given sampling rate and multiplier
+  *
+@@ -197,7 +198,7 @@ int qe_setbrg(enum qe_clock brg, unsigne
+ 	if ((brg < QE_BRG1) || (brg > QE_BRG16))
+ 		return -EINVAL;
+ 
+-	divisor = get_brg_clk() / (rate * multiplier);
++	divisor = qe_get_brg_clk() / (rate * multiplier);
+ 
+ 	if (divisor > QE_BRGC_DIVISOR_MAX + 1) {
+ 		div16 = QE_BRGC_DIV16;
+@@ -415,12 +416,6 @@ void qe_muram_dump(void)
+ }
+ EXPORT_SYMBOL(qe_muram_dump);
+ 
+-void *qe_muram_addr(unsigned long offset)
+-{
+-	return (void *)&qe_immr->muram[offset];
+-}
+-EXPORT_SYMBOL(qe_muram_addr);
+-
+ /* The maximum number of RISCs we support */
+ #define MAX_QE_RISC     2
+ 
+--- a/arch/powerpc/sysdev/qe_lib/qe_io.c
++++ b/arch/powerpc/sysdev/qe_lib/qe_io.c
+@@ -22,6 +22,7 @@
+ #include <linux/ioport.h>
+ 
+ #include <asm/io.h>
++#include <asm/qe.h>
+ #include <asm/prom.h>
+ #include <sysdev/fsl_soc.h>
+ 
+@@ -41,7 +42,7 @@ struct port_regs {
+ #endif
+ };
+ 
+-static struct port_regs *par_io = NULL;
++static struct port_regs __iomem *par_io;
+ static int num_par_io_ports = 0;
+ 
+ int par_io_init(struct device_node *np)
+@@ -165,7 +166,7 @@ int par_io_of_config(struct device_node 
+ 	}
+ 
+ 	ph = of_get_property(np, "pio-handle", NULL);
+-	if (ph == 0) {
++	if (ph == NULL) {
+ 		printk(KERN_ERR "pio-handle not available \n");
+ 		return -1;
+ 	}
+@@ -200,7 +201,7 @@ static void dump_par_io(void)
+ {
+ 	unsigned int i;
+ 
+-	printk(KERN_INFO "%s: par_io=%p\n", __FUNCTION__, par_io);
++	printk(KERN_INFO "%s: par_io=%p\n", __func__, par_io);
+ 	for (i = 0; i < num_par_io_ports; i++) {
+ 		printk(KERN_INFO "	cpodr[%u]=%08x\n", i,
+ 			in_be32(&par_io[i].cpodr));
+--- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c
++++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
+@@ -148,57 +148,57 @@ int ucc_fast_init(struct ucc_fast_info *
+ 
+ 	/* check if the UCC port number is in range. */
+ 	if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
+-		printk(KERN_ERR "%s: illegal UCC number\n", __FUNCTION__);
++		printk(KERN_ERR "%s: illegal UCC number\n", __func__);
+ 		return -EINVAL;
+ 	}
+ 
+ 	/* Check that 'max_rx_buf_length' is properly aligned (4). */
+ 	if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) {
+ 		printk(KERN_ERR "%s: max_rx_buf_length not aligned\n",
+-			__FUNCTION__);
++			__func__);
+ 		return -EINVAL;
+ 	}
+ 
+ 	/* Validate Virtual Fifo register values */
+ 	if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) {
+-		printk(KERN_ERR "%s: urfs is too small\n", __FUNCTION__);
++		printk(KERN_ERR "%s: urfs is too small\n", __func__);
+ 		return -EINVAL;
+ 	}
+ 
+ 	if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+-		printk(KERN_ERR "%s: urfs is not aligned\n", __FUNCTION__);
++		printk(KERN_ERR "%s: urfs is not aligned\n", __func__);
+ 		return -EINVAL;
+ 	}
+ 
+ 	if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+-		printk(KERN_ERR "%s: urfet is not aligned.\n", __FUNCTION__);
++		printk(KERN_ERR "%s: urfet is not aligned.\n", __func__);
+ 		return -EINVAL;
+ 	}
+ 
+ 	if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+-		printk(KERN_ERR "%s: urfset is not aligned\n", __FUNCTION__);
++		printk(KERN_ERR "%s: urfset is not aligned\n", __func__);
+ 		return -EINVAL;
+ 	}
+ 
+ 	if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+-		printk(KERN_ERR "%s: utfs is not aligned\n", __FUNCTION__);
++		printk(KERN_ERR "%s: utfs is not aligned\n", __func__);
+ 		return -EINVAL;
+ 	}
+ 
+ 	if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+-		printk(KERN_ERR "%s: utfet is not aligned\n", __FUNCTION__);
++		printk(KERN_ERR "%s: utfet is not aligned\n", __func__);
+ 		return -EINVAL;
+ 	}
+ 
+ 	if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
+-		printk(KERN_ERR "%s: utftt is not aligned\n", __FUNCTION__);
++		printk(KERN_ERR "%s: utftt is not aligned\n", __func__);
+ 		return -EINVAL;
+ 	}
+ 
+ 	uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL);
+ 	if (!uccf) {
+ 		printk(KERN_ERR "%s: Cannot allocate private data\n",
+-			__FUNCTION__);
++			__func__);
+ 		return -ENOMEM;
+ 	}
+ 
+@@ -207,7 +207,7 @@ int ucc_fast_init(struct ucc_fast_info *
+ 	/* Set the PHY base address */
+ 	uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast));
+ 	if (uccf->uf_regs == NULL) {
+-		printk(KERN_ERR "%s: Cannot map UCC registers\n", __FUNCTION__);
++		printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
+ 		return -ENOMEM;
+ 	}
+ 
+@@ -230,7 +230,7 @@ int ucc_fast_init(struct ucc_fast_info *
+ 	/* Set UCC to fast type */
+ 	ret = ucc_set_type(uf_info->ucc_num, UCC_SPEED_TYPE_FAST);
+ 	if (ret) {
+-		printk(KERN_ERR "%s: cannot set UCC type\n", __FUNCTION__);
++		printk(KERN_ERR "%s: cannot set UCC type\n", __func__);
+ 		ucc_fast_free(uccf);
+ 		return ret;
+ 	}
+@@ -270,7 +270,7 @@ int ucc_fast_init(struct ucc_fast_info *
+ 	    qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
+ 	if (IS_ERR_VALUE(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
+ 		printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n",
+-			__FUNCTION__);
++			__func__);
+ 		uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
+ 		ucc_fast_free(uccf);
+ 		return -ENOMEM;
+@@ -283,7 +283,7 @@ int ucc_fast_init(struct ucc_fast_info *
+ 			   UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
+ 	if (IS_ERR_VALUE(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
+ 		printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n",
+-			__FUNCTION__);
++			__func__);
+ 		uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
+ 		ucc_fast_free(uccf);
+ 		return -ENOMEM;
+@@ -314,7 +314,7 @@ int ucc_fast_init(struct ucc_fast_info *
+ 		    ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock,
+ 					COMM_DIR_RX)) {
+ 			printk(KERN_ERR "%s: illegal value for RX clock\n",
+-			       __FUNCTION__);
++			       __func__);
+ 			ucc_fast_free(uccf);
+ 			return -EINVAL;
+ 		}
+@@ -323,7 +323,7 @@ int ucc_fast_init(struct ucc_fast_info *
+ 		    ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock,
+ 					COMM_DIR_TX)) {
+ 			printk(KERN_ERR "%s: illegal value for TX clock\n",
+-			       __FUNCTION__);
++			       __func__);
+ 			ucc_fast_free(uccf);
+ 			return -EINVAL;
+ 		}
+--- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c
++++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
+@@ -142,7 +142,7 @@ int ucc_slow_init(struct ucc_slow_info *
+ 
+ 	/* check if the UCC port number is in range. */
+ 	if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) {
+-		printk(KERN_ERR "%s: illegal UCC number\n", __FUNCTION__);
++		printk(KERN_ERR "%s: illegal UCC number\n", __func__);
+ 		return -EINVAL;
+ 	}
+ 
+@@ -161,7 +161,7 @@ int ucc_slow_init(struct ucc_slow_info *
+ 	uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL);
+ 	if (!uccs) {
+ 		printk(KERN_ERR "%s: Cannot allocate private data\n",
+-			__FUNCTION__);
++			__func__);
+ 		return -ENOMEM;
+ 	}
+ 
+@@ -170,7 +170,7 @@ int ucc_slow_init(struct ucc_slow_info *
+ 	/* Set the PHY base address */
+ 	uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow));
+ 	if (uccs->us_regs == NULL) {
+-		printk(KERN_ERR "%s: Cannot map UCC registers\n", __FUNCTION__);
++		printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
+ 		return -ENOMEM;
+ 	}
+ 
+@@ -189,7 +189,7 @@ int ucc_slow_init(struct ucc_slow_info *
+ 	uccs->us_pram_offset =
+ 		qe_muram_alloc(UCC_SLOW_PRAM_SIZE, ALIGNMENT_OF_UCC_SLOW_PRAM);
+ 	if (IS_ERR_VALUE(uccs->us_pram_offset)) {
+-		printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __FUNCTION__);
++		printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __func__);
+ 		ucc_slow_free(uccs);
+ 		return -ENOMEM;
+ 	}
+@@ -202,7 +202,7 @@ int ucc_slow_init(struct ucc_slow_info *
+ 	/* Set UCC to slow type */
+ 	ret = ucc_set_type(us_info->ucc_num, UCC_SPEED_TYPE_SLOW);
+ 	if (ret) {
+-		printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__);
++		printk(KERN_ERR "%s: cannot set UCC type", __func__);
+ 		ucc_slow_free(uccs);
+ 		return ret;
+ 	}
+@@ -216,7 +216,7 @@ int ucc_slow_init(struct ucc_slow_info *
+ 		qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd),
+ 				QE_ALIGNMENT_OF_BD);
+ 	if (IS_ERR_VALUE(uccs->rx_base_offset)) {
+-		printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __FUNCTION__,
++		printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __func__,
+ 			us_info->rx_bd_ring_len);
+ 		uccs->rx_base_offset = 0;
+ 		ucc_slow_free(uccs);
+@@ -227,7 +227,7 @@ int ucc_slow_init(struct ucc_slow_info *
+ 		qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd),
+ 			QE_ALIGNMENT_OF_BD);
+ 	if (IS_ERR_VALUE(uccs->tx_base_offset)) {
+-		printk(KERN_ERR "%s: cannot allocate TX BDs", __FUNCTION__);
++		printk(KERN_ERR "%s: cannot allocate TX BDs", __func__);
+ 		uccs->tx_base_offset = 0;
+ 		ucc_slow_free(uccs);
+ 		return -ENOMEM;
+@@ -317,7 +317,7 @@ int ucc_slow_init(struct ucc_slow_info *
+ 		if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->rx_clock,
+ 					COMM_DIR_RX)) {
+ 			printk(KERN_ERR "%s: illegal value for RX clock\n",
+-			       __FUNCTION__);
++			       __func__);
+ 			ucc_slow_free(uccs);
+ 			return -EINVAL;
+ 		}
+@@ -325,7 +325,7 @@ int ucc_slow_init(struct ucc_slow_info *
+ 		if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->tx_clock,
+ 					COMM_DIR_TX)) {
+ 			printk(KERN_ERR "%s: illegal value for TX clock\n",
+-			       __FUNCTION__);
++			       __func__);
+ 			ucc_slow_free(uccs);
+ 			return -EINVAL;
+ 		}
+--- a/arch/powerpc/sysdev/rtc_cmos_setup.c
++++ b/arch/powerpc/sysdev/rtc_cmos_setup.c
+@@ -56,3 +56,5 @@ static int  __init add_rtc(void)
+ 	return 0;
+ }
+ fs_initcall(add_rtc);
++
++MODULE_LICENSE("GPL");
+--- a/arch/powerpc/sysdev/tsi108_dev.c
++++ b/arch/powerpc/sysdev/tsi108_dev.c
+@@ -84,7 +84,7 @@ static int __init tsi108_eth_of_init(voi
+ 
+ 		ret = of_address_to_resource(np, 0, &r[0]);
+ 		DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n",
+-			__FUNCTION__,r[0].name, r[0].start, r[0].end);
++			__func__,r[0].name, r[0].start, r[0].end);
+ 		if (ret)
+ 			goto err;
+ 
+@@ -93,7 +93,7 @@ static int __init tsi108_eth_of_init(voi
+ 		r[1].end = irq_of_parse_and_map(np, 0);
+ 		r[1].flags = IORESOURCE_IRQ;
+ 		DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n",
+-			__FUNCTION__,r[1].name, r[1].start, r[1].end);
++			__func__,r[1].name, r[1].start, r[1].end);
+ 
+ 		tsi_eth_dev =
+ 		    platform_device_register_simple("tsi-ethernet", i++, &r[0],
+--- a/arch/powerpc/sysdev/tsi108_pci.c
++++ b/arch/powerpc/sysdev/tsi108_pci.c
+@@ -207,7 +207,7 @@ int __init tsi108_setup_pci(struct devic
+ 	/* PCI Config mapping */
+ 	tsi108_pci_cfg_base = (u32)ioremap(cfg_phys, TSI108_PCI_CFG_SIZE);
+ 	tsi108_pci_cfg_phys = cfg_phys;
+-	DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __FUNCTION__,
++	DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __func__,
+ 	    tsi108_pci_cfg_base);
+ 
+ 	/* Fetch host bridge registers address */
+@@ -395,7 +395,7 @@ static int pci_irq_host_xlate(struct irq
+ static int pci_irq_host_map(struct irq_host *h, unsigned int virq,
+ 			  irq_hw_number_t hw)
+ {	unsigned int irq;
+-	DBG("%s(%d, 0x%lx)\n", __FUNCTION__, virq, hw);
++	DBG("%s(%d, 0x%lx)\n", __func__, virq, hw);
+ 	if ((virq >= 1) && (virq <= 4)){
+ 		irq = virq + IRQ_PCI_INTAD_BASE - 1;
+ 		get_irq_desc(irq)->status |= IRQ_LEVEL;
+--- a/arch/powerpc/xmon/xmon.c
++++ b/arch/powerpc/xmon/xmon.c
+@@ -45,7 +45,6 @@
+ #ifdef CONFIG_PPC64
+ #include <asm/hvcall.h>
+ #include <asm/paca.h>
+-#include <asm/iseries/it_lp_reg_save.h>
+ #endif
+ 
+ #include "nonstdio.h"
+@@ -1244,15 +1243,12 @@ static void get_function_bounds(unsigned
+ 
+ static int xmon_depth_to_print = 64;
+ 
+-#ifdef CONFIG_PPC64
+-#define LRSAVE_OFFSET		0x10
+-#define REG_FRAME_MARKER	0x7265677368657265ul	/* "regshere" */
+-#define MARKER_OFFSET		0x60
++#define LRSAVE_OFFSET		(STACK_FRAME_LR_SAVE * sizeof(unsigned long))
++#define MARKER_OFFSET		(STACK_FRAME_MARKER * sizeof(unsigned long))
++
++#ifdef __powerpc64__
+ #define REGS_OFFSET		0x70
+ #else
+-#define LRSAVE_OFFSET		4
+-#define REG_FRAME_MARKER	0x72656773
+-#define MARKER_OFFSET		8
+ #define REGS_OFFSET		16
+ #endif
+ 
+@@ -1318,7 +1314,7 @@ static void xmon_show_stack(unsigned lon
+ 		/* Look for "regshere" marker to see if this is
+ 		   an exception frame. */
+ 		if (mread(sp + MARKER_OFFSET, &marker, sizeof(unsigned long))
+-		    && marker == REG_FRAME_MARKER) {
++		    && marker == STACK_FRAME_REGS_MARKER) {
+ 			if (mread(sp + REGS_OFFSET, &regs, sizeof(regs))
+ 			    != sizeof(regs)) {
+ 				printf("Couldn't read registers at %lx\n",
+@@ -1598,7 +1594,6 @@ void super_regs(void)
+ 		if (firmware_has_feature(FW_FEATURE_ISERIES)) {
+ 			struct paca_struct *ptrPaca;
+ 			struct lppaca *ptrLpPaca;
+-			struct ItLpRegSave *ptrLpRegSave;
+ 
+ 			/* Dump out relevant Paca data areas. */
+ 			printf("Paca: \n");
+@@ -1611,15 +1606,6 @@ void super_regs(void)
+ 			printf("    Saved Gpr3=%.16lx  Saved Gpr4=%.16lx \n",
+ 			       ptrLpPaca->saved_gpr3, ptrLpPaca->saved_gpr4);
+ 			printf("    Saved Gpr5=%.16lx \n", ptrLpPaca->saved_gpr5);
+-
+-			printf("  Local Processor Register Save Area (LpRegSave): \n");
+-			ptrLpRegSave = ptrPaca->reg_save_ptr;
+-			printf("    Saved Sprg0=%.16lx  Saved Sprg1=%.16lx \n",
+-			       ptrLpRegSave->xSPRG0, ptrLpRegSave->xSPRG0);
+-			printf("    Saved Sprg2=%.16lx  Saved Sprg3=%.16lx \n",
+-			       ptrLpRegSave->xSPRG2, ptrLpRegSave->xSPRG3);
+-			printf("    Saved Msr  =%.16lx  Saved Nia  =%.16lx \n",
+-			       ptrLpRegSave->xMSR, ptrLpRegSave->xNIA);
+ 		}
+ #endif
+ 
+--- a/arch/ppc/8xx_io/commproc.c
++++ b/arch/ppc/8xx_io/commproc.c
+@@ -43,7 +43,7 @@
+ ({									\
+ 	u32 offset = offsetof(immap_t, member);				\
+ 	void *addr = ioremap (IMAP_ADDR + offset,			\
+-			      sizeof( ((immap_t*)0)->member));		\
++			      FIELD_SIZEOF(immap_t, member));		\
+ 	addr;								\
+ })
+ 
+--- a/arch/ppc/8xx_io/fec.c
++++ b/arch/ppc/8xx_io/fec.c
+@@ -520,7 +520,7 @@ fec_enet_interrupt(int irq, void * dev_i
+ #ifdef	CONFIG_USE_MDIO
+ 			fec_enet_mii(dev);
+ #else
+-printk("%s[%d] %s: unexpected FEC_ENET_MII event\n", __FILE__,__LINE__,__FUNCTION__);
++printk("%s[%d] %s: unexpected FEC_ENET_MII event\n", __FILE__, __LINE__, __func__);
+ #endif	/* CONFIG_USE_MDIO */
+ 		}
+ 
+@@ -1441,7 +1441,7 @@ irqreturn_t mii_link_interrupt(int irq, 
+ 		fecp->fec_ecntrl = ecntrl;	/* restore old settings */
+ 	}
+ #else
+-printk("%s[%d] %s: unexpected Link interrupt\n", __FILE__,__LINE__,__FUNCTION__);
++printk("%s[%d] %s: unexpected Link interrupt\n", __FILE__, __LINE__, __func__);
+ #endif	/* CONFIG_USE_MDIO */
+ 
+ #ifndef CONFIG_RPXCLASSIC
+--- a/arch/ppc/kernel/head.S
++++ b/arch/ppc/kernel/head.S
+@@ -701,23 +701,6 @@ load_up_altivec:
+ 	b	fast_exception_return
+ 
+ /*
+- * AltiVec unavailable trap from kernel - print a message, but let
+- * the task use AltiVec in the kernel until it returns to user mode.
+- */
+-KernelAltiVec:
+-	lwz	r3,_MSR(r1)
+-	oris	r3,r3,MSR_VEC@h
+-	stw	r3,_MSR(r1)	/* enable use of AltiVec after return */
+-	lis	r3,87f@h
+-	ori	r3,r3,87f@l
+-	mr	r4,r2		/* current */
+-	lwz	r5,_NIP(r1)
+-	bl	printk
+-	b	ret_from_except
+-87:	.string	"AltiVec used in kernel  (task=%p, pc=%x)  \n"
+-	.align	4,0
+-
+-/*
+  * giveup_altivec(tsk)
+  * Disable AltiVec for the task given as the argument,
+  * and save the AltiVec registers in its thread_struct.
+--- a/arch/ppc/mm/init.c
++++ b/arch/ppc/mm/init.c
+@@ -109,7 +109,6 @@ void show_mem(void)
+ 
+ 	printk("Mem-info:\n");
+ 	show_free_areas();
+-	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
+ 	i = max_mapnr;
+ 	while (i-- > 0) {
+ 		total++;
+--- a/arch/ppc/platforms/radstone_ppc7d.c
++++ b/arch/ppc/platforms/radstone_ppc7d.c
+@@ -512,7 +512,7 @@ static void __init ppc7d_init_irq(void)
+ {
+ 	int irq;
+ 
+-	pr_debug("%s\n", __FUNCTION__);
++	pr_debug("%s\n", __func__);
+ 	i8259_init(0, 0);
+ 	mv64360_init_irq();
+ 
+@@ -569,7 +569,7 @@ static int __init ppc7d_map_irq(struct p
+ 	};
+ 	const long min_idsel = 10, max_idsel = 14, irqs_per_slot = 4;
+ 
+-	pr_debug("%s: %04x/%04x/%x: idsel=%hx pin=%hu\n", __FUNCTION__,
++	pr_debug("%s: %04x/%04x/%x: idsel=%hx pin=%hu\n", __func__,
+ 		 dev->vendor, dev->device, PCI_FUNC(dev->devfn), idsel, pin);
+ 
+ 	return PCI_IRQ_TABLE_LOOKUP;
+@@ -1300,7 +1300,7 @@ static void ppc7d_init2(void)
+ 	u32 data;
+ 	u8 data8;
+ 
+-	pr_debug("%s: enter\n", __FUNCTION__);
++	pr_debug("%s: enter\n", __func__);
+ 
+ 	/* Wait for debugger? */
+ 	if (ppc7d_wait_debugger) {
+@@ -1333,7 +1333,7 @@ static void ppc7d_init2(void)
+         ppc_md.set_rtc_time = ppc7d_set_rtc_time;
+         ppc_md.get_rtc_time = ppc7d_get_rtc_time;
+ 
+-	pr_debug("%s: exit\n", __FUNCTION__);
++	pr_debug("%s: exit\n", __func__);
+ }
+ 
+ /* Called from machine_init(), early, before any of the __init functions
+--- a/arch/ppc/syslib/mpc52xx_setup.c
++++ b/arch/ppc/syslib/mpc52xx_setup.c
+@@ -279,7 +279,7 @@ int mpc52xx_match_psc_function(int psc_i
+ 
+ int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv)
+ {
+-	static spinlock_t lock = SPIN_LOCK_UNLOCKED;
++	static DEFINE_SPINLOCK(lock);
+ 	struct mpc52xx_cdm __iomem *cdm;
+ 	unsigned long flags;
+ 	u16 mclken_div;
+--- a/arch/sparc64/Kconfig
++++ b/arch/sparc64/Kconfig
+@@ -16,6 +16,7 @@ config SPARC64
+ 	bool
+ 	default y
+ 	select HAVE_IDE
++	select HAVE_LMB
+ 	help
+ 	  SPARC is a family of RISC microprocessors designed and marketed by
+ 	  Sun Microsystems, incorporated.  This port covers the newer 64-bit
+--- a/drivers/block/viodasd.c
++++ b/drivers/block/viodasd.c
+@@ -69,7 +69,7 @@ MODULE_LICENSE("GPL");
+ enum {
+ 	PARTITION_SHIFT = 3,
+ 	MAX_DISKNO = HVMAXARCHITECTEDVIRTUALDISKS,
+-	MAX_DISK_NAME = sizeof(((struct gendisk *)0)->disk_name)
++	MAX_DISK_NAME = FIELD_SIZEOF(struct gendisk, disk_name)
+ };
+ 
+ static DEFINE_SPINLOCK(viodasd_spinlock);
+--- a/drivers/char/hvc_beat.c
++++ b/drivers/char/hvc_beat.c
+@@ -78,8 +78,8 @@ static int hvc_beat_put_chars(uint32_t v
+ 	for (rest = cnt; rest > 0; rest -= nlen) {
+ 		nlen = (rest > 16) ? 16 : rest;
+ 		memcpy(kb, buf, nlen);
+-		beat_put_term_char(vtermno, rest, kb[0], kb[1]);
+-		rest -= nlen;
++		beat_put_term_char(vtermno, nlen, kb[0], kb[1]);
++		buf += nlen;
+ 	}
+ 	return cnt;
+ }
+--- a/drivers/char/xilinx_hwicap/buffer_icap.c
++++ b/drivers/char/xilinx_hwicap/buffer_icap.c
+@@ -74,7 +74,7 @@
+ 
+ /**
+  * buffer_icap_get_status - Get the contents of the status register.
+- * @base_address: is the base address of the device
++ * @drvdata: a pointer to the drvdata.
+  *
+  * The status register contains the ICAP status and the done bit.
+  *
+@@ -88,9 +88,9 @@
+  * D1 - Always 1
+  * D0 - Done bit
+  **/
+-static inline u32 buffer_icap_get_status(void __iomem *base_address)
++u32 buffer_icap_get_status(struct hwicap_drvdata *drvdata)
+ {
+-	return in_be32(base_address + XHI_STATUS_REG_OFFSET);
++	return in_be32(drvdata->base_address + XHI_STATUS_REG_OFFSET);
+ }
+ 
+ /**
+@@ -117,20 +117,8 @@ static inline u32 buffer_icap_get_bram(v
+  **/
+ static inline bool buffer_icap_busy(void __iomem *base_address)
+ {
+-	return (buffer_icap_get_status(base_address) & 1) == XHI_NOT_FINISHED;
+-}
+-
+-/**
+- * buffer_icap_busy - Return true if the icap device is not busy
+- * @base_address: is the base address of the device
+- *
+- * The queries the low order bit of the status register, which
+- * indicates whether the current configuration or readback operation
+- * has completed.
+- **/
+-static inline bool buffer_icap_done(void __iomem *base_address)
+-{
+-	return (buffer_icap_get_status(base_address) & 1) == XHI_FINISHED;
++	u32 status = in_be32(base_address + XHI_STATUS_REG_OFFSET);
++	return (status & 1) == XHI_NOT_FINISHED;
+ }
+ 
+ /**
+--- a/drivers/char/xilinx_hwicap/buffer_icap.h
++++ b/drivers/char/xilinx_hwicap/buffer_icap.h
+@@ -44,8 +44,6 @@
+ #include <asm/io.h>
+ #include "xilinx_hwicap.h"
+ 
+-void buffer_icap_reset(struct hwicap_drvdata *drvdata);
+-
+ /* Loads a partial bitstream from system memory. */
+ int buffer_icap_set_configuration(struct hwicap_drvdata *drvdata, u32 *data,
+ 			     u32 Size);
+@@ -54,4 +52,7 @@ int buffer_icap_set_configuration(struct
+ int buffer_icap_get_configuration(struct hwicap_drvdata *drvdata, u32 *data,
+ 			     u32 Size);
+ 
++u32 buffer_icap_get_status(struct hwicap_drvdata *drvdata);
++void buffer_icap_reset(struct hwicap_drvdata *drvdata);
++
+ #endif
+--- a/drivers/char/xilinx_hwicap/fifo_icap.c
++++ b/drivers/char/xilinx_hwicap/fifo_icap.c
+@@ -78,13 +78,6 @@
+ #define XHI_CR_READ_MASK 0x00000002 /* Read from ICAP to FIFO */
+ #define XHI_CR_WRITE_MASK 0x00000001 /* Write from FIFO to ICAP */
+ 
+-/* Status Register (SR) */
+-#define XHI_SR_CFGERR_N_MASK 0x00000100 /* Config Error Mask */
+-#define XHI_SR_DALIGN_MASK 0x00000080 /* Data Alignment Mask */
+-#define XHI_SR_RIP_MASK 0x00000040 /* Read back Mask */
+-#define XHI_SR_IN_ABORT_N_MASK 0x00000020 /* Select Map Abort Mask */
+-#define XHI_SR_DONE_MASK 0x00000001 /* Done bit Mask  */
+-
+ 
+ #define XHI_WFO_MAX_VACANCY 1024 /* Max Write FIFO Vacancy, in words */
+ #define XHI_RFO_MAX_OCCUPANCY 256 /* Max Read FIFO Occupancy, in words */
+@@ -152,13 +145,35 @@ static inline void fifo_icap_start_readb
+ }
+ 
+ /**
++ * fifo_icap_get_status - Get the contents of the status register.
++ * @drvdata: a pointer to the drvdata.
++ *
++ * The status register contains the ICAP status and the done bit.
++ *
++ * D8 - cfgerr
++ * D7 - dalign
++ * D6 - rip
++ * D5 - in_abort_l
++ * D4 - Always 1
++ * D3 - Always 1
++ * D2 - Always 1
++ * D1 - Always 1
++ * D0 - Done bit
++ **/
++u32 fifo_icap_get_status(struct hwicap_drvdata *drvdata)
++{
++	u32 status = in_be32(drvdata->base_address + XHI_SR_OFFSET);
++	dev_dbg(drvdata->dev, "Getting status = %x\n", status);
++	return status;
++}
++
++/**
+  * fifo_icap_busy - Return true if the ICAP is still processing a transaction.
+  * @drvdata: a pointer to the drvdata.
+  **/
+ static inline u32 fifo_icap_busy(struct hwicap_drvdata *drvdata)
+ {
+ 	u32 status = in_be32(drvdata->base_address + XHI_SR_OFFSET);
+-	dev_dbg(drvdata->dev, "Getting status = %x\n", status);
+ 	return (status & XHI_SR_DONE_MASK) ? 0 : 1;
+ }
+ 
+--- a/drivers/char/xilinx_hwicap/fifo_icap.h
++++ b/drivers/char/xilinx_hwicap/fifo_icap.h
+@@ -56,6 +56,7 @@ int fifo_icap_set_configuration(
+ 		u32 *FrameBuffer,
+ 		u32 NumWords);
+ 
++u32 fifo_icap_get_status(struct hwicap_drvdata *drvdata);
+ void fifo_icap_reset(struct hwicap_drvdata *drvdata);
+ void fifo_icap_flush_fifo(struct hwicap_drvdata *drvdata);
+ 
+--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
++++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+@@ -36,7 +36,7 @@
+  *****************************************************************************/
+ 
+ /*
+- * This is the code behind /dev/xilinx_icap -- it allows a user-space
++ * This is the code behind /dev/icap* -- it allows a user-space
+  * application to use the Xilinx ICAP subsystem.
+  *
+  * The following operations are possible:
+@@ -67,7 +67,7 @@
+  * user-space application code that uses this device.  The simplest
+  * way to use this interface is simply:
+  *
+- * cp foo.bit /dev/xilinx_icap
++ * cp foo.bit /dev/icap0
+  *
+  * Note that unless foo.bit is an appropriately constructed partial
+  * bitstream, this has a high likelyhood of overwriting the design
+@@ -105,18 +105,14 @@
+ #include "buffer_icap.h"
+ #include "fifo_icap.h"
+ 
+-#define DRIVER_NAME "xilinx_icap"
++#define DRIVER_NAME "icap"
+ 
+ #define HWICAP_REGS   (0x10000)
+ 
+-/* dynamically allocate device number */
+-static int xhwicap_major;
+-static int xhwicap_minor;
++#define XHWICAP_MAJOR 259
++#define XHWICAP_MINOR 0
+ #define HWICAP_DEVICES 1
+ 
+-module_param(xhwicap_major, int, S_IRUGO);
+-module_param(xhwicap_minor, int, S_IRUGO);
+-
+ /* An array, which is set to true when the device is registered. */
+ static bool probed_devices[HWICAP_DEVICES];
+ static struct mutex icap_sem;
+@@ -250,8 +246,26 @@ static int hwicap_get_configuration_regi
+ 	 * Create the data to be written to the ICAP.
+ 	 */
+ 	buffer[index++] = XHI_DUMMY_PACKET;
++	buffer[index++] = XHI_NOOP_PACKET;
+ 	buffer[index++] = XHI_SYNC_PACKET;
+ 	buffer[index++] = XHI_NOOP_PACKET;
++	buffer[index++] = XHI_NOOP_PACKET;
++
++	/*
++	 * Write the data to the FIFO and initiate the transfer of data present
++	 * in the FIFO to the ICAP device.
++	 */
++	status = drvdata->config->set_configuration(drvdata,
++						    &buffer[0], index);
++	if (status)
++		return status;
++
++	/* If the syncword was not found, then we need to start over. */
++	status = drvdata->config->get_status(drvdata);
++	if ((status & XHI_SR_DALIGN_MASK) != XHI_SR_DALIGN_MASK)
++		return -EIO;
++
++	index = 0;
+ 	buffer[index++] = hwicap_type_1_read(reg) | 1;
+ 	buffer[index++] = XHI_NOOP_PACKET;
+ 	buffer[index++] = XHI_NOOP_PACKET;
+@@ -587,7 +601,7 @@ static int __devinit hwicap_setup(struct
+ 	probed_devices[id] = 1;
+ 	mutex_unlock(&icap_sem);
+ 
+-	devt = MKDEV(xhwicap_major, xhwicap_minor + id);
++	devt = MKDEV(XHWICAP_MAJOR, XHWICAP_MINOR + id);
+ 
+ 	drvdata = kzalloc(sizeof(struct hwicap_drvdata), GFP_KERNEL);
+ 	if (!drvdata) {
+@@ -664,12 +678,14 @@ static int __devinit hwicap_setup(struct
+ static struct hwicap_driver_config buffer_icap_config = {
+ 	.get_configuration = buffer_icap_get_configuration,
+ 	.set_configuration = buffer_icap_set_configuration,
++	.get_status = buffer_icap_get_status,
+ 	.reset = buffer_icap_reset,
+ };
+ 
+ static struct hwicap_driver_config fifo_icap_config = {
+ 	.get_configuration = fifo_icap_get_configuration,
+ 	.set_configuration = fifo_icap_set_configuration,
++	.get_status = fifo_icap_get_status,
+ 	.reset = fifo_icap_reset,
+ };
+ 
+@@ -690,7 +706,7 @@ static int __devexit hwicap_remove(struc
+ 	dev_set_drvdata(dev, NULL);
+ 
+ 	mutex_lock(&icap_sem);
+-	probed_devices[MINOR(dev->devt)-xhwicap_minor] = 0;
++	probed_devices[MINOR(dev->devt)-XHWICAP_MINOR] = 0;
+ 	mutex_unlock(&icap_sem);
+ 	return 0;		/* success */
+ }
+@@ -830,23 +846,12 @@ static int __init hwicap_module_init(voi
+ 	icap_class = class_create(THIS_MODULE, "xilinx_config");
+ 	mutex_init(&icap_sem);
+ 
+-	if (xhwicap_major) {
+-		devt = MKDEV(xhwicap_major, xhwicap_minor);
+-		retval = register_chrdev_region(
+-				devt,
+-				HWICAP_DEVICES,
+-				DRIVER_NAME);
+-		if (retval < 0)
+-			return retval;
+-	} else {
+-		retval = alloc_chrdev_region(&devt,
+-				xhwicap_minor,
+-				HWICAP_DEVICES,
+-				DRIVER_NAME);
+-		if (retval < 0)
+-			return retval;
+-		xhwicap_major = MAJOR(devt);
+-	}
++	devt = MKDEV(XHWICAP_MAJOR, XHWICAP_MINOR);
++	retval = register_chrdev_region(devt,
++					HWICAP_DEVICES,
++					DRIVER_NAME);
++	if (retval < 0)
++		return retval;
+ 
+ 	retval = platform_driver_register(&hwicap_platform_driver);
+ 
+@@ -871,7 +876,7 @@ static int __init hwicap_module_init(voi
+ 
+ static void __exit hwicap_module_cleanup(void)
+ {
+-	dev_t devt = MKDEV(xhwicap_major, xhwicap_minor);
++	dev_t devt = MKDEV(XHWICAP_MAJOR, XHWICAP_MINOR);
+ 
+ 	class_destroy(icap_class);
+ 
+--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.h
++++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
+@@ -65,10 +65,27 @@ struct hwicap_drvdata {
+ };
+ 
+ struct hwicap_driver_config {
++	/* Read configuration data given by size into the data buffer.
++	   Return 0 if successful. */
+ 	int (*get_configuration)(struct hwicap_drvdata *drvdata, u32 *data,
+ 			u32 size);
++	/* Write configuration data given by size from the data buffer.
++	   Return 0 if successful. */
+ 	int (*set_configuration)(struct hwicap_drvdata *drvdata, u32 *data,
+ 			u32 size);
++	/* Get the status register, bit pattern given by:
++	 * D8 - 0 = configuration error
++	 * D7 - 1 = alignment found
++	 * D6 - 1 = readback in progress
++	 * D5 - 0 = abort in progress
++	 * D4 - Always 1
++	 * D3 - Always 1
++	 * D2 - Always 1
++	 * D1 - Always 1
++	 * D0 - 1 = operation completed
++	 */
++	u32 (*get_status)(struct hwicap_drvdata *drvdata);
++	/* Reset the hw */
+ 	void (*reset)(struct hwicap_drvdata *drvdata);
+ };
+ 
+@@ -163,6 +180,13 @@ struct config_registers {
+ /* Constant to use for CRC check when CRC has been disabled */
+ #define XHI_DISABLED_AUTO_CRC       0x0000DEFCUL
+ 
++/* Meanings of the bits returned by get_status */
++#define XHI_SR_CFGERR_N_MASK 0x00000100 /* Config Error Mask */
++#define XHI_SR_DALIGN_MASK 0x00000080 /* Data Alignment Mask */
++#define XHI_SR_RIP_MASK 0x00000040 /* Read back Mask */
++#define XHI_SR_IN_ABORT_N_MASK 0x00000020 /* Select Map Abort Mask */
++#define XHI_SR_DONE_MASK 0x00000001 /* Done bit Mask  */
++
+ /**
+  * hwicap_type_1_read - Generates a Type 1 read packet header.
+  * @reg: is the address of the register to be read back.
+--- a/drivers/mtd/nand/fsl_elbc_nand.c
++++ b/drivers/mtd/nand/fsl_elbc_nand.c
+@@ -36,207 +36,12 @@
+ #include <linux/mtd/partitions.h>
+ 
+ #include <asm/io.h>
+-
++#include <asm/fsl_lbc.h>
+ 
+ #define MAX_BANKS 8
+ #define ERR_BYTE 0xFF /* Value returned for read bytes when read failed */
+ #define FCM_TIMEOUT_MSECS 500 /* Maximum number of mSecs to wait for FCM */
+ 
+-struct elbc_bank {
+-	__be32 br;             /**< Base Register  */
+-#define BR_BA           0xFFFF8000
+-#define BR_BA_SHIFT             15
+-#define BR_PS           0x00001800
+-#define BR_PS_SHIFT             11
+-#define BR_PS_8         0x00000800  /* Port Size 8 bit */
+-#define BR_PS_16        0x00001000  /* Port Size 16 bit */
+-#define BR_PS_32        0x00001800  /* Port Size 32 bit */
+-#define BR_DECC         0x00000600
+-#define BR_DECC_SHIFT            9
+-#define BR_DECC_OFF     0x00000000  /* HW ECC checking and generation off */
+-#define BR_DECC_CHK     0x00000200  /* HW ECC checking on, generation off */
+-#define BR_DECC_CHK_GEN 0x00000400  /* HW ECC checking and generation on */
+-#define BR_WP           0x00000100
+-#define BR_WP_SHIFT              8
+-#define BR_MSEL         0x000000E0
+-#define BR_MSEL_SHIFT            5
+-#define BR_MS_GPCM      0x00000000  /* GPCM */
+-#define BR_MS_FCM       0x00000020  /* FCM */
+-#define BR_MS_SDRAM     0x00000060  /* SDRAM */
+-#define BR_MS_UPMA      0x00000080  /* UPMA */
+-#define BR_MS_UPMB      0x000000A0  /* UPMB */
+-#define BR_MS_UPMC      0x000000C0  /* UPMC */
+-#define BR_V            0x00000001
+-#define BR_V_SHIFT               0
+-#define BR_RES          ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V)
+-
+-	__be32 or;             /**< Base Register  */
+-#define OR0 0x5004
+-#define OR1 0x500C
+-#define OR2 0x5014
+-#define OR3 0x501C
+-#define OR4 0x5024
+-#define OR5 0x502C
+-#define OR6 0x5034
+-#define OR7 0x503C
+-
+-#define OR_FCM_AM               0xFFFF8000
+-#define OR_FCM_AM_SHIFT                 15
+-#define OR_FCM_BCTLD            0x00001000
+-#define OR_FCM_BCTLD_SHIFT              12
+-#define OR_FCM_PGS              0x00000400
+-#define OR_FCM_PGS_SHIFT                10
+-#define OR_FCM_CSCT             0x00000200
+-#define OR_FCM_CSCT_SHIFT                9
+-#define OR_FCM_CST              0x00000100
+-#define OR_FCM_CST_SHIFT                 8
+-#define OR_FCM_CHT              0x00000080
+-#define OR_FCM_CHT_SHIFT                 7
+-#define OR_FCM_SCY              0x00000070
+-#define OR_FCM_SCY_SHIFT                 4
+-#define OR_FCM_SCY_1            0x00000010
+-#define OR_FCM_SCY_2            0x00000020
+-#define OR_FCM_SCY_3            0x00000030
+-#define OR_FCM_SCY_4            0x00000040
+-#define OR_FCM_SCY_5            0x00000050
+-#define OR_FCM_SCY_6            0x00000060
+-#define OR_FCM_SCY_7            0x00000070
+-#define OR_FCM_RST              0x00000008
+-#define OR_FCM_RST_SHIFT                 3
+-#define OR_FCM_TRLX             0x00000004
+-#define OR_FCM_TRLX_SHIFT                2
+-#define OR_FCM_EHTR             0x00000002
+-#define OR_FCM_EHTR_SHIFT                1
+-};
+-
+-struct elbc_regs {
+-	struct elbc_bank bank[8];
+-	u8 res0[0x28];
+-	__be32 mar;             /**< UPM Address Register */
+-	u8 res1[0x4];
+-	__be32 mamr;            /**< UPMA Mode Register */
+-	__be32 mbmr;            /**< UPMB Mode Register */
+-	__be32 mcmr;            /**< UPMC Mode Register */
+-	u8 res2[0x8];
+-	__be32 mrtpr;           /**< Memory Refresh Timer Prescaler Register */
+-	__be32 mdr;             /**< UPM Data Register */
+-	u8 res3[0x4];
+-	__be32 lsor;            /**< Special Operation Initiation Register */
+-	__be32 lsdmr;           /**< SDRAM Mode Register */
+-	u8 res4[0x8];
+-	__be32 lurt;            /**< UPM Refresh Timer */
+-	__be32 lsrt;            /**< SDRAM Refresh Timer */
+-	u8 res5[0x8];
+-	__be32 ltesr;           /**< Transfer Error Status Register */
+-#define LTESR_BM   0x80000000
+-#define LTESR_FCT  0x40000000
+-#define LTESR_PAR  0x20000000
+-#define LTESR_WP   0x04000000
+-#define LTESR_ATMW 0x00800000
+-#define LTESR_ATMR 0x00400000
+-#define LTESR_CS   0x00080000
+-#define LTESR_CC   0x00000001
+-#define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC)
+-	__be32 ltedr;           /**< Transfer Error Disable Register */
+-	__be32 lteir;           /**< Transfer Error Interrupt Register */
+-	__be32 lteatr;          /**< Transfer Error Attributes Register */
+-	__be32 ltear;           /**< Transfer Error Address Register */
+-	u8 res6[0xC];
+-	__be32 lbcr;            /**< Configuration Register */
+-#define LBCR_LDIS  0x80000000
+-#define LBCR_LDIS_SHIFT    31
+-#define LBCR_BCTLC 0x00C00000
+-#define LBCR_BCTLC_SHIFT   22
+-#define LBCR_AHD   0x00200000
+-#define LBCR_LPBSE 0x00020000
+-#define LBCR_LPBSE_SHIFT   17
+-#define LBCR_EPAR  0x00010000
+-#define LBCR_EPAR_SHIFT    16
+-#define LBCR_BMT   0x0000FF00
+-#define LBCR_BMT_SHIFT      8
+-#define LBCR_INIT  0x00040000
+-	__be32 lcrr;            /**< Clock Ratio Register */
+-#define LCRR_DBYP    0x80000000
+-#define LCRR_DBYP_SHIFT      31
+-#define LCRR_BUFCMDC 0x30000000
+-#define LCRR_BUFCMDC_SHIFT   28
+-#define LCRR_ECL     0x03000000
+-#define LCRR_ECL_SHIFT       24
+-#define LCRR_EADC    0x00030000
+-#define LCRR_EADC_SHIFT      16
+-#define LCRR_CLKDIV  0x0000000F
+-#define LCRR_CLKDIV_SHIFT     0
+-	u8 res7[0x8];
+-	__be32 fmr;             /**< Flash Mode Register */
+-#define FMR_CWTO     0x0000F000
+-#define FMR_CWTO_SHIFT       12
+-#define FMR_BOOT     0x00000800
+-#define FMR_ECCM     0x00000100
+-#define FMR_AL       0x00000030
+-#define FMR_AL_SHIFT          4
+-#define FMR_OP       0x00000003
+-#define FMR_OP_SHIFT          0
+-	__be32 fir;             /**< Flash Instruction Register */
+-#define FIR_OP0      0xF0000000
+-#define FIR_OP0_SHIFT        28
+-#define FIR_OP1      0x0F000000
+-#define FIR_OP1_SHIFT        24
+-#define FIR_OP2      0x00F00000
+-#define FIR_OP2_SHIFT        20
+-#define FIR_OP3      0x000F0000
+-#define FIR_OP3_SHIFT        16
+-#define FIR_OP4      0x0000F000
+-#define FIR_OP4_SHIFT        12
+-#define FIR_OP5      0x00000F00
+-#define FIR_OP5_SHIFT         8
+-#define FIR_OP6      0x000000F0
+-#define FIR_OP6_SHIFT         4
+-#define FIR_OP7      0x0000000F
+-#define FIR_OP7_SHIFT         0
+-#define FIR_OP_NOP   0x0	/* No operation and end of sequence */
+-#define FIR_OP_CA    0x1        /* Issue current column address */
+-#define FIR_OP_PA    0x2        /* Issue current block+page address */
+-#define FIR_OP_UA    0x3        /* Issue user defined address */
+-#define FIR_OP_CM0   0x4        /* Issue command from FCR[CMD0] */
+-#define FIR_OP_CM1   0x5        /* Issue command from FCR[CMD1] */
+-#define FIR_OP_CM2   0x6        /* Issue command from FCR[CMD2] */
+-#define FIR_OP_CM3   0x7        /* Issue command from FCR[CMD3] */
+-#define FIR_OP_WB    0x8        /* Write FBCR bytes from FCM buffer */
+-#define FIR_OP_WS    0x9        /* Write 1 or 2 bytes from MDR[AS] */
+-#define FIR_OP_RB    0xA        /* Read FBCR bytes to FCM buffer */
+-#define FIR_OP_RS    0xB        /* Read 1 or 2 bytes to MDR[AS] */
+-#define FIR_OP_CW0   0xC        /* Wait then issue FCR[CMD0] */
+-#define FIR_OP_CW1   0xD        /* Wait then issue FCR[CMD1] */
+-#define FIR_OP_RBW   0xE        /* Wait then read FBCR bytes */
+-#define FIR_OP_RSW   0xE        /* Wait then read 1 or 2 bytes */
+-	__be32 fcr;             /**< Flash Command Register */
+-#define FCR_CMD0     0xFF000000
+-#define FCR_CMD0_SHIFT       24
+-#define FCR_CMD1     0x00FF0000
+-#define FCR_CMD1_SHIFT       16
+-#define FCR_CMD2     0x0000FF00
+-#define FCR_CMD2_SHIFT        8
+-#define FCR_CMD3     0x000000FF
+-#define FCR_CMD3_SHIFT        0
+-	__be32 fbar;            /**< Flash Block Address Register */
+-#define FBAR_BLK     0x00FFFFFF
+-	__be32 fpar;            /**< Flash Page Address Register */
+-#define FPAR_SP_PI   0x00007C00
+-#define FPAR_SP_PI_SHIFT     10
+-#define FPAR_SP_MS   0x00000200
+-#define FPAR_SP_CI   0x000001FF
+-#define FPAR_SP_CI_SHIFT      0
+-#define FPAR_LP_PI   0x0003F000
+-#define FPAR_LP_PI_SHIFT     12
+-#define FPAR_LP_MS   0x00000800
+-#define FPAR_LP_CI   0x000007FF
+-#define FPAR_LP_CI_SHIFT      0
+-	__be32 fbcr;            /**< Flash Byte Count Register */
+-#define FBCR_BC      0x00000FFF
+-	u8 res11[0x8];
+-	u8 res8[0xF00];
+-};
+-
+ struct fsl_elbc_ctrl;
+ 
+ /* mtd information per set */
+@@ -261,7 +66,7 @@ struct fsl_elbc_ctrl {
+ 
+ 	/* device info */
+ 	struct device *dev;
+-	struct elbc_regs __iomem *regs;
++	struct fsl_lbc_regs __iomem *regs;
+ 	int irq;
+ 	wait_queue_head_t irq_wait;
+ 	unsigned int irq_status; /* status read from LTESR by irq handler */
+@@ -322,7 +127,7 @@ static void set_addr(struct mtd_info *mt
+ 	struct nand_chip *chip = mtd->priv;
+ 	struct fsl_elbc_mtd *priv = chip->priv;
+ 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+-	struct elbc_regs __iomem *lbc = ctrl->regs;
++	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+ 	int buf_num;
+ 
+ 	ctrl->page = page_addr;
+@@ -363,7 +168,7 @@ static int fsl_elbc_run_command(struct m
+ 	struct nand_chip *chip = mtd->priv;
+ 	struct fsl_elbc_mtd *priv = chip->priv;
+ 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+-	struct elbc_regs __iomem *lbc = ctrl->regs;
++	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+ 
+ 	/* Setup the FMR[OP] to execute without write protection */
+ 	out_be32(&lbc->fmr, priv->fmr | 3);
+@@ -406,7 +211,7 @@ static void fsl_elbc_do_read(struct nand
+ {
+ 	struct fsl_elbc_mtd *priv = chip->priv;
+ 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+-	struct elbc_regs __iomem *lbc = ctrl->regs;
++	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+ 
+ 	if (priv->page_size) {
+ 		out_be32(&lbc->fir,
+@@ -439,7 +244,7 @@ static void fsl_elbc_cmdfunc(struct mtd_
+ 	struct nand_chip *chip = mtd->priv;
+ 	struct fsl_elbc_mtd *priv = chip->priv;
+ 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+-	struct elbc_regs __iomem *lbc = ctrl->regs;
++	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+ 
+ 	ctrl->use_mdr = 0;
+ 
+@@ -775,7 +580,7 @@ static int fsl_elbc_wait(struct mtd_info
+ {
+ 	struct fsl_elbc_mtd *priv = chip->priv;
+ 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+-	struct elbc_regs __iomem *lbc = ctrl->regs;
++	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+ 
+ 	if (ctrl->status != LTESR_CC)
+ 		return NAND_STATUS_FAIL;
+@@ -807,7 +612,7 @@ static int fsl_elbc_chip_init_tail(struc
+ 	struct nand_chip *chip = mtd->priv;
+ 	struct fsl_elbc_mtd *priv = chip->priv;
+ 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+-	struct elbc_regs __iomem *lbc = ctrl->regs;
++	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+ 	unsigned int al;
+ 
+ 	/* calculate FMR Address Length field */
+@@ -922,7 +727,7 @@ static void fsl_elbc_write_page(struct m
+ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
+ {
+ 	struct fsl_elbc_ctrl *ctrl = priv->ctrl;
+-	struct elbc_regs __iomem *lbc = ctrl->regs;
++	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+ 	struct nand_chip *chip = &priv->chip;
+ 
+ 	dev_dbg(priv->dev, "eLBC Set Information for bank %d\n", priv->bank);
+@@ -986,7 +791,7 @@ static int fsl_elbc_chip_remove(struct f
+ static int fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
+                                struct device_node *node)
+ {
+-	struct elbc_regs __iomem *lbc = ctrl->regs;
++	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+ 	struct fsl_elbc_mtd *priv;
+ 	struct resource res;
+ #ifdef CONFIG_MTD_PARTITIONS
+@@ -1083,7 +888,7 @@ err:
+ 
+ static int __devinit fsl_elbc_ctrl_init(struct fsl_elbc_ctrl *ctrl)
+ {
+-	struct elbc_regs __iomem *lbc = ctrl->regs;
++	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+ 
+ 	/* clear event registers */
+ 	setbits32(&lbc->ltesr, LTESR_NAND_MASK);
+@@ -1128,7 +933,7 @@ static int __devexit fsl_elbc_ctrl_remov
+ static irqreturn_t fsl_elbc_ctrl_irq(int irqno, void *data)
+ {
+ 	struct fsl_elbc_ctrl *ctrl = data;
+-	struct elbc_regs __iomem *lbc = ctrl->regs;
++	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+ 	__be32 status = in_be32(&lbc->ltesr) & LTESR_NAND_MASK;
+ 
+ 	if (status) {
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -219,7 +219,8 @@ obj-$(CONFIG_SMC911X) += smc911x.o
+ obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
+ obj-$(CONFIG_DM9000) += dm9000.o
+ obj-$(CONFIG_FEC_8XX) += fec_8xx/
+-obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o
++obj-$(CONFIG_PASEMI_MAC) += pasemi_mac_driver.o
++pasemi_mac_driver-objs := pasemi_mac.o pasemi_mac_ethtool.o
+ obj-$(CONFIG_MLX4_CORE) += mlx4/
+ obj-$(CONFIG_ENC28J60) += enc28j60.o
+ 
+--- a/drivers/net/iseries_veth.c
++++ b/drivers/net/iseries_veth.c
+@@ -308,7 +308,8 @@ static void veth_complete_allocation(voi
+ 
+ static int veth_allocate_events(HvLpIndex rlp, int number)
+ {
+-	struct veth_allocation vc = { COMPLETION_INITIALIZER(vc.c), 0 };
++	struct veth_allocation vc =
++		{ COMPLETION_INITIALIZER_ONSTACK(vc.c), 0 };
+ 
+ 	mf_allocate_lp_events(rlp, HvLpEvent_Type_VirtualLan,
+ 			    sizeof(struct veth_lpevent), number,
+--- a/drivers/net/pasemi_mac.c
++++ b/drivers/net/pasemi_mac.c
+@@ -55,15 +55,10 @@
+  * - Multiqueue RX/TX
+  */
+ 
+-
+-/* Must be a power of two */
+-#define RX_RING_SIZE 2048
+-#define TX_RING_SIZE 4096
+-
+ #define LRO_MAX_AGGR 64
+ 
+ #define PE_MIN_MTU	64
+-#define PE_MAX_MTU	1500
++#define PE_MAX_MTU	9000
+ #define PE_DEF_MTU	ETH_DATA_LEN
+ 
+ #define DEFAULT_MSG_ENABLE	  \
+@@ -76,16 +71,6 @@
+ 	 NETIF_MSG_RX_ERR	| \
+ 	 NETIF_MSG_TX_ERR)
+ 
+-#define TX_DESC(tx, num)	((tx)->chan.ring_virt[(num) & (TX_RING_SIZE-1)])
+-#define TX_DESC_INFO(tx, num)	((tx)->ring_info[(num) & (TX_RING_SIZE-1)])
+-#define RX_DESC(rx, num)	((rx)->chan.ring_virt[(num) & (RX_RING_SIZE-1)])
+-#define RX_DESC_INFO(rx, num)	((rx)->ring_info[(num) & (RX_RING_SIZE-1)])
+-#define RX_BUFF(rx, num)	((rx)->buffers[(num) & (RX_RING_SIZE-1)])
+-
+-#define RING_USED(ring)		(((ring)->next_to_fill - (ring)->next_to_clean) \
+-				 & ((ring)->size - 1))
+-#define RING_AVAIL(ring)	((ring->size) - RING_USED(ring))
+-
+ MODULE_LICENSE("GPL");
+ MODULE_AUTHOR ("Olof Johansson <olof@lixom.net>");
+ MODULE_DESCRIPTION("PA Semi PWRficient Ethernet driver");
+@@ -94,6 +79,8 @@ static int debug = -1;	/* -1 == use DEFA
+ module_param(debug, int, 0);
+ MODULE_PARM_DESC(debug, "PA Semi MAC bitmapped debugging message enable value");
+ 
++extern const struct ethtool_ops pasemi_mac_ethtool_ops;
++
+ static int translation_enabled(void)
+ {
+ #if defined(CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE)
+@@ -322,6 +309,104 @@ static int pasemi_mac_unmap_tx_skb(struc
+ 	return (nfrags + 3) & ~1;
+ }
+ 
++static struct pasemi_mac_csring *pasemi_mac_setup_csring(struct pasemi_mac *mac)
++{
++	struct pasemi_mac_csring *ring;
++	u32 val;
++	unsigned int cfg;
++	int chno;
++
++	ring = pasemi_dma_alloc_chan(TXCHAN, sizeof(struct pasemi_mac_csring),
++				       offsetof(struct pasemi_mac_csring, chan));
++
++	if (!ring) {
++		dev_err(&mac->pdev->dev, "Can't allocate checksum channel\n");
++		goto out_chan;
++	}
++
++	chno = ring->chan.chno;
++
++	ring->size = CS_RING_SIZE;
++	ring->next_to_fill = 0;
++
++	/* Allocate descriptors */
++	if (pasemi_dma_alloc_ring(&ring->chan, CS_RING_SIZE))
++		goto out_ring_desc;
++
++	write_dma_reg(PAS_DMA_TXCHAN_BASEL(chno),
++		      PAS_DMA_TXCHAN_BASEL_BRBL(ring->chan.ring_dma));
++	val = PAS_DMA_TXCHAN_BASEU_BRBH(ring->chan.ring_dma >> 32);
++	val |= PAS_DMA_TXCHAN_BASEU_SIZ(CS_RING_SIZE >> 3);
++
++	write_dma_reg(PAS_DMA_TXCHAN_BASEU(chno), val);
++
++	ring->events[0] = pasemi_dma_alloc_flag();
++	ring->events[1] = pasemi_dma_alloc_flag();
++	if (ring->events[0] < 0 || ring->events[1] < 0)
++		goto out_flags;
++
++	pasemi_dma_clear_flag(ring->events[0]);
++	pasemi_dma_clear_flag(ring->events[1]);
++
++	ring->fun = pasemi_dma_alloc_fun();
++	if (ring->fun < 0)
++		goto out_fun;
++
++	cfg = PAS_DMA_TXCHAN_CFG_TY_FUNC | PAS_DMA_TXCHAN_CFG_UP |
++	      PAS_DMA_TXCHAN_CFG_TATTR(ring->fun) |
++	      PAS_DMA_TXCHAN_CFG_LPSQ | PAS_DMA_TXCHAN_CFG_LPDQ;
++
++	if (translation_enabled())
++		cfg |= PAS_DMA_TXCHAN_CFG_TRD | PAS_DMA_TXCHAN_CFG_TRR;
++
++	write_dma_reg(PAS_DMA_TXCHAN_CFG(chno), cfg);
++
++	/* enable channel */
++	pasemi_dma_start_chan(&ring->chan, PAS_DMA_TXCHAN_TCMDSTA_SZ |
++					   PAS_DMA_TXCHAN_TCMDSTA_DB |
++					   PAS_DMA_TXCHAN_TCMDSTA_DE |
++					   PAS_DMA_TXCHAN_TCMDSTA_DA);
++
++	return ring;
++
++out_fun:
++out_flags:
++	if (ring->events[0] >= 0)
++		pasemi_dma_free_flag(ring->events[0]);
++	if (ring->events[1] >= 0)
++		pasemi_dma_free_flag(ring->events[1]);
++	pasemi_dma_free_ring(&ring->chan);
++out_ring_desc:
++	pasemi_dma_free_chan(&ring->chan);
++out_chan:
++
++	return NULL;
++}
++
++static void pasemi_mac_setup_csrings(struct pasemi_mac *mac)
++{
++	int i;
++	mac->cs[0] = pasemi_mac_setup_csring(mac);
++	if (mac->type == MAC_TYPE_XAUI)
++		mac->cs[1] = pasemi_mac_setup_csring(mac);
++	else
++		mac->cs[1] = 0;
++
++	for (i = 0; i < MAX_CS; i++)
++		if (mac->cs[i])
++			mac->num_cs++;
++}
++
++static void pasemi_mac_free_csring(struct pasemi_mac_csring *csring)
++{
++	pasemi_dma_stop_chan(&csring->chan);
++	pasemi_dma_free_flag(csring->events[0]);
++	pasemi_dma_free_flag(csring->events[1]);
++	pasemi_dma_free_ring(&csring->chan);
++	pasemi_dma_free_chan(&csring->chan);
++	pasemi_dma_free_fun(csring->fun);
++}
++
+ static int pasemi_mac_setup_rx_resources(const struct net_device *dev)
+ {
+ 	struct pasemi_mac_rxring *ring;
+@@ -445,7 +530,7 @@ pasemi_mac_setup_tx_resources(const stru
+ 	cfg = PAS_DMA_TXCHAN_CFG_TY_IFACE |
+ 	      PAS_DMA_TXCHAN_CFG_TATTR(mac->dma_if) |
+ 	      PAS_DMA_TXCHAN_CFG_UP |
+-	      PAS_DMA_TXCHAN_CFG_WT(2);
++	      PAS_DMA_TXCHAN_CFG_WT(4);
+ 
+ 	if (translation_enabled())
+ 		cfg |= PAS_DMA_TXCHAN_CFG_TRD | PAS_DMA_TXCHAN_CFG_TRR;
+@@ -810,13 +895,21 @@ restart:
+ 		u64 mactx = TX_DESC(txring, i);
+ 		struct sk_buff *skb;
+ 
+-		skb = TX_DESC_INFO(txring, i+1).skb;
+-		nr_frags = TX_DESC_INFO(txring, i).dma;
+-
+ 		if ((mactx  & XCT_MACTX_E) ||
+ 		    (*chan->status & PAS_STATUS_ERROR))
+ 			pasemi_mac_tx_error(mac, mactx);
+ 
++		/* Skip over control descriptors */
++		if (!(mactx & XCT_MACTX_LLEN_M)) {
++			TX_DESC(txring, i) = 0;
++			TX_DESC(txring, i+1) = 0;
++			buf_count = 2;
++			continue;
++		}
++
++		skb = TX_DESC_INFO(txring, i+1).skb;
++		nr_frags = TX_DESC_INFO(txring, i).dma;
++
+ 		if (unlikely(mactx & XCT_MACTX_O))
+ 			/* Not yet transmitted */
+ 			break;
+@@ -1041,13 +1134,7 @@ static int pasemi_mac_open(struct net_de
+ {
+ 	struct pasemi_mac *mac = netdev_priv(dev);
+ 	unsigned int flags;
+-	int ret;
+-
+-	/* enable rx section */
+-	write_dma_reg(PAS_DMA_COM_RXCMD, PAS_DMA_COM_RXCMD_EN);
+-
+-	/* enable tx section */
+-	write_dma_reg(PAS_DMA_COM_TXCMD, PAS_DMA_COM_TXCMD_EN);
++	int i, ret;
+ 
+ 	flags = PAS_MAC_CFG_TXP_FCE | PAS_MAC_CFG_TXP_FPC(3) |
+ 		PAS_MAC_CFG_TXP_SL(3) | PAS_MAC_CFG_TXP_COB(0xf) |
+@@ -1064,6 +1151,19 @@ static int pasemi_mac_open(struct net_de
+ 	if (!mac->tx)
+ 		goto out_tx_ring;
+ 
++	/* We might already have allocated rings in case mtu was changed
++	 * before interface was brought up.
++	 */
++	if (dev->mtu > 1500 && !mac->num_cs) {
++		pasemi_mac_setup_csrings(mac);
++		if (!mac->num_cs)
++			goto out_tx_ring;
++	}
++
++	/* Zero out rmon counters */
++	for (i = 0; i < 32; i++)
++		write_mac_reg(mac, PAS_MAC_RMON(i), 0);
++
+ 	/* 0x3ff with 33MHz clock is about 31us */
+ 	write_iob_reg(PAS_IOB_DMA_COM_TIMEOUTCFG,
+ 		      PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(0x3ff));
+@@ -1247,7 +1347,7 @@ static int pasemi_mac_close(struct net_d
+ {
+ 	struct pasemi_mac *mac = netdev_priv(dev);
+ 	unsigned int sta;
+-	int rxch, txch;
++	int rxch, txch, i;
+ 
+ 	rxch = rx_ring(mac)->chan.chno;
+ 	txch = tx_ring(mac)->chan.chno;
+@@ -1292,6 +1392,13 @@ static int pasemi_mac_close(struct net_d
+ 	free_irq(mac->tx->chan.irq, mac->tx);
+ 	free_irq(mac->rx->chan.irq, mac->rx);
+ 
++	for (i = 0; i < mac->num_cs; i++) {
++		pasemi_mac_free_csring(mac->cs[i]);
++		mac->cs[i] = NULL;
++	}
++
++	mac->num_cs = 0;
++
+ 	/* Free resources */
+ 	pasemi_mac_free_rx_resources(mac);
+ 	pasemi_mac_free_tx_resources(mac);
+@@ -1299,35 +1406,113 @@ static int pasemi_mac_close(struct net_d
+ 	return 0;
+ }
+ 
++static void pasemi_mac_queue_csdesc(const struct sk_buff *skb,
++				    const dma_addr_t *map,
++				    const unsigned int *map_size,
++				    struct pasemi_mac_txring *txring,
++				    struct pasemi_mac_csring *csring)
++{
++	u64 fund;
++	dma_addr_t cs_dest;
++	const int nh_off = skb_network_offset(skb);
++	const int nh_len = skb_network_header_len(skb);
++	const int nfrags = skb_shinfo(skb)->nr_frags;
++	int cs_size, i, fill, hdr, cpyhdr, evt;
++	dma_addr_t csdma;
++
++	fund = XCT_FUN_ST | XCT_FUN_RR_8BRES |
++	       XCT_FUN_O | XCT_FUN_FUN(csring->fun) |
++	       XCT_FUN_CRM_SIG | XCT_FUN_LLEN(skb->len - nh_off) |
++	       XCT_FUN_SHL(nh_len >> 2) | XCT_FUN_SE;
++
++	switch (ip_hdr(skb)->protocol) {
++	case IPPROTO_TCP:
++		fund |= XCT_FUN_SIG_TCP4;
++		/* TCP checksum is 16 bytes into the header */
++		cs_dest = map[0] + skb_transport_offset(skb) + 16;
++		break;
++	case IPPROTO_UDP:
++		fund |= XCT_FUN_SIG_UDP4;
++		/* UDP checksum is 6 bytes into the header */
++		cs_dest = map[0] + skb_transport_offset(skb) + 6;
++		break;
++	default:
++		BUG();
++	}
++
++	/* Do the checksum offloaded */
++	fill = csring->next_to_fill;
++	hdr = fill;
++
++	CS_DESC(csring, fill++) = fund;
++	/* Room for 8BRES. Checksum result is really 2 bytes into it */
++	csdma = csring->chan.ring_dma + (fill & (CS_RING_SIZE-1)) * 8 + 2;
++	CS_DESC(csring, fill++) = 0;
++
++	CS_DESC(csring, fill) = XCT_PTR_LEN(map_size[0]-nh_off) | XCT_PTR_ADDR(map[0]+nh_off);
++	for (i = 1; i <= nfrags; i++)
++		CS_DESC(csring, fill+i) = XCT_PTR_LEN(map_size[i]) | XCT_PTR_ADDR(map[i]);
++
++	fill += i;
++	if (fill & 1)
++		fill++;
++
++	/* Copy the result into the TCP packet */
++	cpyhdr = fill;
++	CS_DESC(csring, fill++) = XCT_FUN_O | XCT_FUN_FUN(csring->fun) |
++				  XCT_FUN_LLEN(2) | XCT_FUN_SE;
++	CS_DESC(csring, fill++) = XCT_PTR_LEN(2) | XCT_PTR_ADDR(cs_dest) | XCT_PTR_T;
++	CS_DESC(csring, fill++) = XCT_PTR_LEN(2) | XCT_PTR_ADDR(csdma);
++	fill++;
++
++	evt = !csring->last_event;
++	csring->last_event = evt;
++
++	/* Event handshaking with MAC TX */
++	CS_DESC(csring, fill++) = CTRL_CMD_T | CTRL_CMD_META_EVT | CTRL_CMD_O |
++				  CTRL_CMD_ETYPE_SET | CTRL_CMD_REG(csring->events[evt]);
++	CS_DESC(csring, fill++) = 0;
++	CS_DESC(csring, fill++) = CTRL_CMD_T | CTRL_CMD_META_EVT | CTRL_CMD_O |
++				  CTRL_CMD_ETYPE_WCLR | CTRL_CMD_REG(csring->events[!evt]);
++	CS_DESC(csring, fill++) = 0;
++	csring->next_to_fill = fill & (CS_RING_SIZE-1);
++
++	cs_size = fill - hdr;
++	write_dma_reg(PAS_DMA_TXCHAN_INCR(csring->chan.chno), (cs_size) >> 1);
++
++	/* TX-side event handshaking */
++	fill = txring->next_to_fill;
++	TX_DESC(txring, fill++) = CTRL_CMD_T | CTRL_CMD_META_EVT | CTRL_CMD_O |
++				  CTRL_CMD_ETYPE_WSET | CTRL_CMD_REG(csring->events[evt]);
++	TX_DESC(txring, fill++) = 0;
++	TX_DESC(txring, fill++) = CTRL_CMD_T | CTRL_CMD_META_EVT | CTRL_CMD_O |
++				  CTRL_CMD_ETYPE_CLR | CTRL_CMD_REG(csring->events[!evt]);
++	TX_DESC(txring, fill++) = 0;
++	txring->next_to_fill = fill;
++
++	write_dma_reg(PAS_DMA_TXCHAN_INCR(txring->chan.chno), 2);
++
++	return;
++}
++
+ static int pasemi_mac_start_tx(struct sk_buff *skb, struct net_device *dev)
+ {
+-	struct pasemi_mac *mac = netdev_priv(dev);
+-	struct pasemi_mac_txring *txring;
+-	u64 dflags, mactx;
++	struct pasemi_mac * const mac = netdev_priv(dev);
++	struct pasemi_mac_txring * const txring = tx_ring(mac);
++	struct pasemi_mac_csring *csring;
++	u64 dflags = 0;
++	u64 mactx;
+ 	dma_addr_t map[MAX_SKB_FRAGS+1];
+ 	unsigned int map_size[MAX_SKB_FRAGS+1];
+ 	unsigned long flags;
+ 	int i, nfrags;
+ 	int fill;
++	const int nh_off = skb_network_offset(skb);
++	const int nh_len = skb_network_header_len(skb);
+ 
+-	dflags = XCT_MACTX_O | XCT_MACTX_ST | XCT_MACTX_CRC_PAD;
+-
+-	if (skb->ip_summed == CHECKSUM_PARTIAL) {
+-		const unsigned char *nh = skb_network_header(skb);
++	prefetch(&txring->ring_info);
+ 
+-		switch (ip_hdr(skb)->protocol) {
+-		case IPPROTO_TCP:
+-			dflags |= XCT_MACTX_CSUM_TCP;
+-			dflags |= XCT_MACTX_IPH(skb_network_header_len(skb) >> 2);
+-			dflags |= XCT_MACTX_IPO(nh - skb->data);
+-			break;
+-		case IPPROTO_UDP:
+-			dflags |= XCT_MACTX_CSUM_UDP;
+-			dflags |= XCT_MACTX_IPH(skb_network_header_len(skb) >> 2);
+-			dflags |= XCT_MACTX_IPO(nh - skb->data);
+-			break;
+-		}
+-	}
++	dflags = XCT_MACTX_O | XCT_MACTX_ST | XCT_MACTX_CRC_PAD;
+ 
+ 	nfrags = skb_shinfo(skb)->nr_frags;
+ 
+@@ -1350,24 +1535,46 @@ static int pasemi_mac_start_tx(struct sk
+ 		}
+ 	}
+ 
+-	mactx = dflags | XCT_MACTX_LLEN(skb->len);
++	if (skb->ip_summed == CHECKSUM_PARTIAL && skb->len <= 1540) {
++		switch (ip_hdr(skb)->protocol) {
++		case IPPROTO_TCP:
++			dflags |= XCT_MACTX_CSUM_TCP;
++			dflags |= XCT_MACTX_IPH(nh_len >> 2);
++			dflags |= XCT_MACTX_IPO(nh_off);
++			break;
++		case IPPROTO_UDP:
++			dflags |= XCT_MACTX_CSUM_UDP;
++			dflags |= XCT_MACTX_IPH(nh_len >> 2);
++			dflags |= XCT_MACTX_IPO(nh_off);
++			break;
++		default:
++			WARN_ON(1);
++		}
++	}
+ 
+-	txring = tx_ring(mac);
++	mactx = dflags | XCT_MACTX_LLEN(skb->len);
+ 
+ 	spin_lock_irqsave(&txring->lock, flags);
+ 
+-	fill = txring->next_to_fill;
+-
+ 	/* Avoid stepping on the same cache line that the DMA controller
+ 	 * is currently about to send, so leave at least 8 words available.
+ 	 * Total free space needed is mactx + fragments + 8
+ 	 */
+-	if (RING_AVAIL(txring) < nfrags + 10) {
++	if (RING_AVAIL(txring) < nfrags + 14) {
+ 		/* no room -- stop the queue and wait for tx intr */
+ 		netif_stop_queue(dev);
+ 		goto out_err;
+ 	}
+ 
++	/* Queue up checksum + event descriptors, if needed */
++	if (mac->num_cs && skb->ip_summed == CHECKSUM_PARTIAL && skb->len > 1540) {
++		csring = mac->cs[mac->last_cs];
++		mac->last_cs = (mac->last_cs + 1) % mac->num_cs;
++
++		pasemi_mac_queue_csdesc(skb, map, map_size, txring, csring);
++	}
++
++	fill = txring->next_to_fill;
+ 	TX_DESC(txring, fill) = mactx;
+ 	TX_DESC_INFO(txring, fill).dma = nfrags;
+ 	fill++;
+@@ -1441,12 +1648,33 @@ static int pasemi_mac_poll(struct napi_s
+ 	return pkts;
+ }
+ 
++#ifdef CONFIG_NET_POLL_CONTROLLER
++/*
++ * Polling 'interrupt' - used by things like netconsole to send skbs
++ * without having to re-enable interrupts. It's not called while
++ * the interrupt routine is executing.
++ */
++static void pasemi_mac_netpoll(struct net_device *dev)
++{
++	const struct pasemi_mac *mac = netdev_priv(dev);
++
++	disable_irq(mac->tx->chan.irq);
++	pasemi_mac_tx_intr(mac->tx->chan.irq, mac->tx);
++	enable_irq(mac->tx->chan.irq);
++
++	disable_irq(mac->rx->chan.irq);
++	pasemi_mac_rx_intr(mac->rx->chan.irq, mac->rx);
++	enable_irq(mac->rx->chan.irq);
++}
++#endif
++
+ static int pasemi_mac_change_mtu(struct net_device *dev, int new_mtu)
+ {
+ 	struct pasemi_mac *mac = netdev_priv(dev);
+ 	unsigned int reg;
+-	unsigned int rcmdsta;
++	unsigned int rcmdsta = 0;
+ 	int running;
++	int ret = 0;
+ 
+ 	if (new_mtu < PE_MIN_MTU || new_mtu > PE_MAX_MTU)
+ 		return -EINVAL;
+@@ -1468,6 +1696,16 @@ static int pasemi_mac_change_mtu(struct 
+ 		pasemi_mac_pause_rxint(mac);
+ 		pasemi_mac_clean_rx(rx_ring(mac), RX_RING_SIZE);
+ 		pasemi_mac_free_rx_buffers(mac);
++
++	}
++
++	/* Setup checksum channels if large MTU and none already allocated */
++	if (new_mtu > 1500 && !mac->num_cs) {
++		pasemi_mac_setup_csrings(mac);
++		if (!mac->num_cs) {
++			ret = -ENOMEM;
++			goto out;
++		}
+ 	}
+ 
+ 	/* Change maxf, i.e. what size frames are accepted.
+@@ -1482,6 +1720,7 @@ static int pasemi_mac_change_mtu(struct 
+ 	/* MTU + ETH_HLEN + VLAN_HLEN + 2 64B cachelines */
+ 	mac->bufsz = new_mtu + ETH_HLEN + ETH_FCS_LEN + LOCAL_SKB_ALIGN + 128;
+ 
++out:
+ 	if (running) {
+ 		write_dma_reg(PAS_DMA_RXINT_RCMDSTA(mac->dma_if),
+ 			      rcmdsta | PAS_DMA_RXINT_RCMDSTA_EN);
+@@ -1494,7 +1733,7 @@ static int pasemi_mac_change_mtu(struct 
+ 		pasemi_mac_intf_enable(mac);
+ 	}
+ 
+-	return 0;
++	return ret;
+ }
+ 
+ static int __devinit
+@@ -1528,7 +1767,7 @@ pasemi_mac_probe(struct pci_dev *pdev, c
+ 	netif_napi_add(dev, &mac->napi, pasemi_mac_poll, 64);
+ 
+ 	dev->features = NETIF_F_IP_CSUM | NETIF_F_LLTX | NETIF_F_SG |
+-			NETIF_F_HIGHDMA;
++			NETIF_F_HIGHDMA | NETIF_F_GSO;
+ 
+ 	mac->lro_mgr.max_aggr = LRO_MAX_AGGR;
+ 	mac->lro_mgr.max_desc = MAX_LRO_DESCRIPTORS;
+@@ -1588,8 +1827,12 @@ pasemi_mac_probe(struct pci_dev *pdev, c
+ 	dev->mtu = PE_DEF_MTU;
+ 	/* 1500 MTU + ETH_HLEN + VLAN_HLEN + 2 64B cachelines */
+ 	mac->bufsz = dev->mtu + ETH_HLEN + ETH_FCS_LEN + LOCAL_SKB_ALIGN + 128;
++#ifdef CONFIG_NET_POLL_CONTROLLER
++	dev->poll_controller = pasemi_mac_netpoll;
++#endif
+ 
+ 	dev->change_mtu = pasemi_mac_change_mtu;
++	dev->ethtool_ops = &pasemi_mac_ethtool_ops;
+ 
+ 	if (err)
+ 		goto out;
+--- a/drivers/net/pasemi_mac.h
++++ b/drivers/net/pasemi_mac.h
+@@ -26,7 +26,14 @@
+ #include <linux/spinlock.h>
+ #include <linux/phy.h>
+ 
++/* Must be a power of two */
++#define RX_RING_SIZE 2048
++#define TX_RING_SIZE 4096
++#define CS_RING_SIZE (TX_RING_SIZE*2)
++
++
+ #define MAX_LRO_DESCRIPTORS 8
++#define MAX_CS	2
+ 
+ struct pasemi_mac_txring {
+ 	struct pasemi_dmachan chan; /* Must be first */
+@@ -51,6 +58,15 @@ struct pasemi_mac_rxring {
+ 	struct pasemi_mac *mac;	/* Needed in intr handler */
+ };
+ 
++struct pasemi_mac_csring {
++	struct pasemi_dmachan chan;
++	unsigned int	size;
++	unsigned int	next_to_fill;
++	int		events[2];
++	int		last_event;
++	int		fun;
++};
++
+ struct pasemi_mac {
+ 	struct net_device *netdev;
+ 	struct pci_dev *pdev;
+@@ -60,10 +76,12 @@ struct pasemi_mac {
+ 	struct napi_struct napi;
+ 
+ 	int		bufsz; /* RX ring buffer size */
++	int		last_cs;
++	int		num_cs;
++	u32		dma_if;
+ 	u8		type;
+ #define MAC_TYPE_GMAC	1
+ #define MAC_TYPE_XAUI	2
+-	u32	dma_if;
+ 
+ 	u8		mac_addr[6];
+ 
+@@ -74,6 +92,7 @@ struct pasemi_mac {
+ 
+ 	struct pasemi_mac_txring *tx;
+ 	struct pasemi_mac_rxring *rx;
++	struct pasemi_mac_csring *cs[MAX_CS];
+ 	char		tx_irq_name[10];		/* "eth%d tx" */
+ 	char		rx_irq_name[10];		/* "eth%d rx" */
+ 	int	link;
+@@ -90,6 +109,16 @@ struct pasemi_mac_buffer {
+ 	dma_addr_t	dma;
+ };
+ 
++#define TX_DESC(tx, num)	((tx)->chan.ring_virt[(num) & (TX_RING_SIZE-1)])
++#define TX_DESC_INFO(tx, num)	((tx)->ring_info[(num) & (TX_RING_SIZE-1)])
++#define RX_DESC(rx, num)	((rx)->chan.ring_virt[(num) & (RX_RING_SIZE-1)])
++#define RX_DESC_INFO(rx, num)	((rx)->ring_info[(num) & (RX_RING_SIZE-1)])
++#define RX_BUFF(rx, num)	((rx)->buffers[(num) & (RX_RING_SIZE-1)])
++#define CS_DESC(cs, num)	((cs)->chan.ring_virt[(num) & (CS_RING_SIZE-1)])
++
++#define RING_USED(ring)	(((ring)->next_to_fill - (ring)->next_to_clean) \
++				& ((ring)->size - 1))
++#define RING_AVAIL(ring)	((ring->size) - RING_USED(ring))
+ 
+ /* PCI register offsets and formats */
+ 
+@@ -101,6 +130,7 @@ enum {
+ 	PAS_MAC_CFG_ADR0 = 0x8c,
+ 	PAS_MAC_CFG_ADR1 = 0x90,
+ 	PAS_MAC_CFG_TXP = 0x98,
++	PAS_MAC_CFG_RMON = 0x100,
+ 	PAS_MAC_IPC_CHNL = 0x208,
+ };
+ 
+@@ -172,6 +202,8 @@ enum {
+ #define PAS_MAC_CFG_TXP_TIFG(x)		(((x) << PAS_MAC_CFG_TXP_TIFG_S) & \
+ 					 PAS_MAC_CFG_TXP_TIFG_M)
+ 
++#define PAS_MAC_RMON(r)			(0x100+(r)*4)
++
+ #define PAS_MAC_IPC_CHNL_DCHNO_M	0x003f0000
+ #define PAS_MAC_IPC_CHNL_DCHNO_S	16
+ #define PAS_MAC_IPC_CHNL_DCHNO(x)	(((x) << PAS_MAC_IPC_CHNL_DCHNO_S) & \
+@@ -181,4 +213,5 @@ enum {
+ #define PAS_MAC_IPC_CHNL_BCH(x)		(((x) << PAS_MAC_IPC_CHNL_BCH_S) & \
+ 					 PAS_MAC_IPC_CHNL_BCH_M)
+ 
++
+ #endif /* PASEMI_MAC_H */
+--- /dev/null
++++ b/drivers/net/pasemi_mac_ethtool.c
+@@ -0,0 +1,159 @@
++/*
++ * Copyright (C) 2006-2008 PA Semi, Inc
++ *
++ * Ethtool hooks for the PA Semi PWRficient onchip 1G/10G Ethernet MACs
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
++ */
++
++
++#include <linux/netdevice.h>
++#include <linux/ethtool.h>
++#include <linux/pci.h>
++#include <linux/inet_lro.h>
++
++#include <asm/pasemi_dma.h>
++#include "pasemi_mac.h"
++
++static struct {
++	const char str[ETH_GSTRING_LEN];
++} ethtool_stats_keys[] = {
++	{ "rx-drops" },
++	{ "rx-bytes" },
++	{ "rx-packets" },
++	{ "rx-broadcast-packets" },
++	{ "rx-multicast-packets" },
++	{ "rx-crc-errors" },
++	{ "rx-undersize-errors" },
++	{ "rx-oversize-errors" },
++	{ "rx-short-fragment-errors" },
++	{ "rx-jabber-errors" },
++	{ "rx-64-byte-packets" },
++	{ "rx-65-127-byte-packets" },
++	{ "rx-128-255-byte-packets" },
++	{ "rx-256-511-byte-packets" },
++	{ "rx-512-1023-byte-packets" },
++	{ "rx-1024-1518-byte-packets" },
++	{ "rx-pause-frames" },
++	{ "tx-bytes" },
++	{ "tx-packets" },
++	{ "tx-broadcast-packets" },
++	{ "tx-multicast-packets" },
++	{ "tx-collisions" },
++	{ "tx-late-collisions" },
++	{ "tx-excessive-collisions" },
++	{ "tx-crc-errors" },
++	{ "tx-undersize-errors" },
++	{ "tx-oversize-errors" },
++	{ "tx-64-byte-packets" },
++	{ "tx-65-127-byte-packets" },
++	{ "tx-128-255-byte-packets" },
++	{ "tx-256-511-byte-packets" },
++	{ "tx-512-1023-byte-packets" },
++	{ "tx-1024-1518-byte-packets" },
++};
++
++static int
++pasemi_mac_ethtool_get_settings(struct net_device *netdev,
++			       struct ethtool_cmd *cmd)
++{
++	struct pasemi_mac *mac = netdev_priv(netdev);
++	struct phy_device *phydev = mac->phydev;
++
++	return phy_ethtool_gset(phydev, cmd);
++}
++
++static void
++pasemi_mac_ethtool_get_drvinfo(struct net_device *netdev,
++			       struct ethtool_drvinfo *drvinfo)
++{
++	struct pasemi_mac *mac;
++	mac = netdev_priv(netdev);
++
++	/* clear and fill out info */
++	memset(drvinfo, 0, sizeof(struct ethtool_drvinfo));
++	strncpy(drvinfo->driver, "pasemi_mac", 12);
++	strcpy(drvinfo->version, "N/A");
++	strcpy(drvinfo->fw_version, "N/A");
++	strncpy(drvinfo->bus_info, pci_name(mac->pdev), 32);
++}
++
++static u32
++pasemi_mac_ethtool_get_msglevel(struct net_device *netdev)
++{
++	struct pasemi_mac *mac = netdev_priv(netdev);
++	return mac->msg_enable;
++}
++
++static void
++pasemi_mac_ethtool_set_msglevel(struct net_device *netdev,
++				u32 level)
++{
++	struct pasemi_mac *mac = netdev_priv(netdev);
++	mac->msg_enable = level;
++}
++
++
++static void
++pasemi_mac_ethtool_get_ringparam(struct net_device *netdev,
++				 struct ethtool_ringparam *ering)
++{
++	struct pasemi_mac *mac = netdev->priv;
++
++	ering->tx_max_pending = TX_RING_SIZE/2;
++	ering->tx_pending = RING_USED(mac->tx)/2;
++	ering->rx_max_pending = RX_RING_SIZE/4;
++	ering->rx_pending = RING_USED(mac->rx)/4;
++}
++
++static int pasemi_mac_get_sset_count(struct net_device *netdev, int sset)
++{
++	switch (sset) {
++	case ETH_SS_STATS:
++		return ARRAY_SIZE(ethtool_stats_keys);
++	default:
++		return -EOPNOTSUPP;
++	}
++}
++
++static void pasemi_mac_get_ethtool_stats(struct net_device *netdev,
++		struct ethtool_stats *stats, u64 *data)
++{
++	struct pasemi_mac *mac = netdev->priv;
++	int i;
++
++	data[0] = pasemi_read_dma_reg(PAS_DMA_RXINT_RCMDSTA(mac->dma_if))
++			>> PAS_DMA_RXINT_RCMDSTA_DROPS_S;
++	for (i = 0; i < 32; i++)
++		data[1+i] = pasemi_read_mac_reg(mac->dma_if, PAS_MAC_RMON(i));
++}
++
++static void pasemi_mac_get_strings(struct net_device *netdev, u32 stringset,
++				   u8 *data)
++{
++	memcpy(data, ethtool_stats_keys, sizeof(ethtool_stats_keys));
++}
++
++const struct ethtool_ops pasemi_mac_ethtool_ops = {
++	.get_settings		= pasemi_mac_ethtool_get_settings,
++	.get_drvinfo		= pasemi_mac_ethtool_get_drvinfo,
++	.get_msglevel		= pasemi_mac_ethtool_get_msglevel,
++	.set_msglevel		= pasemi_mac_ethtool_set_msglevel,
++	.get_link		= ethtool_op_get_link,
++	.get_ringparam          = pasemi_mac_ethtool_get_ringparam,
++	.get_strings		= pasemi_mac_get_strings,
++	.get_sset_count		= pasemi_mac_get_sset_count,
++	.get_ethtool_stats	= pasemi_mac_get_ethtool_stats,
++};
++
+--- a/drivers/net/ps3_gelic_net.c
++++ b/drivers/net/ps3_gelic_net.c
+@@ -1266,6 +1266,85 @@ int gelic_net_set_rx_csum(struct net_dev
+ 	return 0;
+ }
+ 
++static void gelic_net_get_wol(struct net_device *netdev,
++			      struct ethtool_wolinfo *wol)
++{
++	if (0 <= ps3_compare_firmware_version(2, 2, 0))
++		wol->supported = WAKE_MAGIC;
++	else
++		wol->supported = 0;
++
++	wol->wolopts = ps3_sys_manager_get_wol() ? wol->supported : 0;
++	memset(&wol->sopass, 0, sizeof(wol->sopass));
++}
++static int gelic_net_set_wol(struct net_device *netdev,
++			     struct ethtool_wolinfo *wol)
++{
++	int status;
++	struct gelic_card *card;
++	u64 v1, v2;
++
++	if (ps3_compare_firmware_version(2, 2, 0) < 0 ||
++	    !capable(CAP_NET_ADMIN))
++		return -EPERM;
++
++	if (wol->wolopts & ~WAKE_MAGIC)
++		return -EINVAL;
++
++	card = netdev_card(netdev);
++	if (wol->wolopts & WAKE_MAGIC) {
++		status = lv1_net_control(bus_id(card), dev_id(card),
++					 GELIC_LV1_SET_WOL,
++					 GELIC_LV1_WOL_MAGIC_PACKET,
++					 0, GELIC_LV1_WOL_MP_ENABLE,
++					 &v1, &v2);
++		if (status) {
++			pr_info("%s: enabling WOL failed %d\n", __func__,
++				status);
++			status = -EIO;
++			goto done;
++		}
++		status = lv1_net_control(bus_id(card), dev_id(card),
++					 GELIC_LV1_SET_WOL,
++					 GELIC_LV1_WOL_ADD_MATCH_ADDR,
++					 0, GELIC_LV1_WOL_MATCH_ALL,
++					 &v1, &v2);
++		if (!status)
++			ps3_sys_manager_set_wol(1);
++		else {
++			pr_info("%s: enabling WOL filter failed %d\n",
++				__func__, status);
++			status = -EIO;
++		}
++	} else {
++		status = lv1_net_control(bus_id(card), dev_id(card),
++					 GELIC_LV1_SET_WOL,
++					 GELIC_LV1_WOL_MAGIC_PACKET,
++					 0, GELIC_LV1_WOL_MP_DISABLE,
++					 &v1, &v2);
++		if (status) {
++			pr_info("%s: disabling WOL failed %d\n", __func__,
++				status);
++			status = -EIO;
++			goto done;
++		}
++		status = lv1_net_control(bus_id(card), dev_id(card),
++					 GELIC_LV1_SET_WOL,
++					 GELIC_LV1_WOL_DELETE_MATCH_ADDR,
++					 0, GELIC_LV1_WOL_MATCH_ALL,
++					 &v1, &v2);
++		if (!status)
++			ps3_sys_manager_set_wol(0);
++		else {
++			pr_info("%s: removing WOL filter failed %d\n",
++				__func__, status);
++			status = -EIO;
++		}
++	}
++done:
++	return status;
++}
++
+ static struct ethtool_ops gelic_ether_ethtool_ops = {
+ 	.get_drvinfo	= gelic_net_get_drvinfo,
+ 	.get_settings	= gelic_ether_get_settings,
+@@ -1274,6 +1353,8 @@ static struct ethtool_ops gelic_ether_et
+ 	.set_tx_csum	= ethtool_op_set_tx_csum,
+ 	.get_rx_csum	= gelic_net_get_rx_csum,
+ 	.set_rx_csum	= gelic_net_set_rx_csum,
++	.get_wol	= gelic_net_get_wol,
++	.set_wol	= gelic_net_set_wol,
+ };
+ 
+ /**
+--- a/drivers/net/ps3_gelic_net.h
++++ b/drivers/net/ps3_gelic_net.h
+@@ -182,12 +182,32 @@ enum gelic_lv1_net_control_code {
+ 	GELIC_LV1_GET_ETH_PORT_STATUS	= 2,
+ 	GELIC_LV1_SET_NEGOTIATION_MODE	= 3,
+ 	GELIC_LV1_GET_VLAN_ID		= 4,
++	GELIC_LV1_SET_WOL		= 5,
+ 	GELIC_LV1_GET_CHANNEL           = 6,
+ 	GELIC_LV1_POST_WLAN_CMD		= 9,
+ 	GELIC_LV1_GET_WLAN_CMD_RESULT	= 10,
+ 	GELIC_LV1_GET_WLAN_EVENT	= 11
+ };
+ 
++/* for GELIC_LV1_SET_WOL */
++enum gelic_lv1_wol_command {
++	GELIC_LV1_WOL_MAGIC_PACKET	= 1,
++	GELIC_LV1_WOL_ADD_MATCH_ADDR	= 6,
++	GELIC_LV1_WOL_DELETE_MATCH_ADDR	= 7,
++};
++
++/* for GELIC_LV1_WOL_MAGIC_PACKET */
++enum gelic_lv1_wol_mp_arg {
++	GELIC_LV1_WOL_MP_DISABLE	= 0,
++	GELIC_LV1_WOL_MP_ENABLE		= 1,
++};
++
++/* for GELIC_LV1_WOL_{ADD,DELETE}_MATCH_ADDR */
++enum gelic_lv1_wol_match_arg {
++	GELIC_LV1_WOL_MATCH_INDIVIDUAL	= 0,
++	GELIC_LV1_WOL_MATCH_ALL		= 1,
++};
++
+ /* status returened from GET_ETH_PORT_STATUS */
+ enum gelic_lv1_ether_port_status {
+ 	GELIC_LV1_ETHER_LINK_UP		= 0x0000000000000001L,
+--- a/drivers/net/ucc_geth.c
++++ b/drivers/net/ucc_geth.c
+@@ -3853,7 +3853,13 @@ static int ucc_geth_probe(struct of_devi
+ 
+ 	ugeth_vdbg("%s: IN", __FUNCTION__);
+ 
+-	prop = of_get_property(np, "device-id", NULL);
++	prop = of_get_property(np, "cell-index", NULL);
++	if (!prop) {
++		prop = of_get_property(np, "device-id", NULL);
++		if (!prop)
++			return -ENODEV;
++	}
++
+ 	ucc_num = *prop - 1;
+ 	if ((ucc_num < 0) || (ucc_num > 7))
+ 		return -ENODEV;
+--- a/drivers/net/ucc_geth_mii.c
++++ b/drivers/net/ucc_geth_mii.c
+@@ -203,9 +203,14 @@ static int uec_mdio_probe(struct of_devi
+ 		if ((res.start >= tempres.start) &&
+ 		    (res.end <= tempres.end)) {
+ 			/* set this UCC to be the MII master */
+-			const u32 *id = of_get_property(tempnp, "device-id", NULL);
+-			if (id == NULL)
+-				goto bus_register_fail;
++			const u32 *id;
++
++			id = of_get_property(tempnp, "cell-index", NULL);
++			if (!id) {
++				id = of_get_property(tempnp, "device-id", NULL);
++				if (!id)
++					goto bus_register_fail;
++			}
+ 
+ 			ucc_set_qe_mux_mii_mng(*id - 1);
+ 
+--- a/drivers/of/Kconfig
++++ b/drivers/of/Kconfig
+@@ -1,3 +1,15 @@
+ config OF_DEVICE
+ 	def_bool y
+ 	depends on OF && (SPARC || PPC_OF)
++
++config OF_GPIO
++	def_bool y
++	depends on OF && PPC_OF && HAVE_GPIO_LIB
++	help
++	  OpenFirmware GPIO accessors
++
++config OF_I2C
++	def_bool y
++	depends on OF && I2C
++	help
++	  OpenFirmware I2C accessors
+--- a/drivers/of/Makefile
++++ b/drivers/of/Makefile
+@@ -1,2 +1,4 @@
+ obj-y = base.o
+ obj-$(CONFIG_OF_DEVICE) += device.o platform.o
++obj-$(CONFIG_OF_GPIO)   += gpio.o
++obj-$(CONFIG_OF_I2C)	+= i2c.o
+--- a/drivers/of/base.c
++++ b/drivers/of/base.c
+@@ -117,6 +117,32 @@ int of_device_is_compatible(const struct
+ EXPORT_SYMBOL(of_device_is_compatible);
+ 
+ /**
++ *  of_device_is_available - check if a device is available for use
++ *
++ *  @device: Node to check for availability
++ *
++ *  Returns 1 if the status property is absent or set to "okay" or "ok",
++ *  0 otherwise
++ */
++int of_device_is_available(const struct device_node *device)
++{
++	const char *status;
++	int statlen;
++
++	status = of_get_property(device, "status", &statlen);
++	if (status == NULL)
++		return 1;
++
++	if (statlen > 0) {
++		if (!strcmp(status, "okay") || !strcmp(status, "ok"))
++			return 1;
++	}
++
++	return 0;
++}
++EXPORT_SYMBOL(of_device_is_available);
++
++/**
+  *	of_get_parent - Get a node's parent if any
+  *	@node:	Node to get parent
+  *
+--- /dev/null
++++ b/drivers/of/gpio.c
+@@ -0,0 +1,242 @@
++/*
++ * OF helpers for the GPIO API
++ *
++ * Copyright (c) 2007-2008  MontaVista Software, Inc.
++ *
++ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#include <linux/kernel.h>
++#include <linux/errno.h>
++#include <linux/io.h>
++#include <linux/of.h>
++#include <linux/of_gpio.h>
++#include <asm/prom.h>
++
++/**
++ * of_get_gpio - Get a GPIO number from the device tree to use with GPIO API
++ * @np:		device node to get GPIO from
++ * @index:	index of the GPIO
++ *
++ * Returns GPIO number to use with Linux generic GPIO API, or one of the errno
++ * value on the error condition.
++ */
++int of_get_gpio(struct device_node *np, int index)
++{
++	int ret = -EINVAL;
++	struct device_node *gc;
++	struct of_gpio_chip *of_gc = NULL;
++	int size;
++	const u32 *gpios;
++	u32 nr_cells;
++	int i;
++	const void *gpio_spec;
++	const u32 *gpio_cells;
++	int gpio_index = 0;
++
++	gpios = of_get_property(np, "gpios", &size);
++	if (!gpios) {
++		ret = -ENOENT;
++		goto err0;
++	}
++	nr_cells = size / sizeof(u32);
++
++	for (i = 0; i < nr_cells; gpio_index++) {
++		const phandle *gpio_phandle;
++
++		gpio_phandle = gpios + i;
++		gpio_spec = gpio_phandle + 1;
++
++		/* one cell hole in the gpios = <>; */
++		if (!*gpio_phandle) {
++			if (gpio_index == index)
++				return -ENOENT;
++			i++;
++			continue;
++		}
++
++		gc = of_find_node_by_phandle(*gpio_phandle);
++		if (!gc) {
++			pr_debug("%s: could not find phandle for gpios\n",
++				 np->full_name);
++			goto err0;
++		}
++
++		of_gc = gc->data;
++		if (!of_gc) {
++			pr_debug("%s: gpio controller %s isn't registered\n",
++				 np->full_name, gc->full_name);
++			goto err1;
++		}
++
++		gpio_cells = of_get_property(gc, "#gpio-cells", &size);
++		if (!gpio_cells || size != sizeof(*gpio_cells) ||
++				*gpio_cells != of_gc->gpio_cells) {
++			pr_debug("%s: wrong #gpio-cells for %s\n",
++				 np->full_name, gc->full_name);
++			goto err1;
++		}
++
++		/* Next phandle is at phandle cells + #gpio-cells */
++		i += sizeof(*gpio_phandle) / sizeof(u32) + *gpio_cells;
++		if (i >= nr_cells + 1) {
++			pr_debug("%s: insufficient gpio-spec length\n",
++				 np->full_name);
++			goto err1;
++		}
++
++		if (gpio_index == index)
++			break;
++
++		of_gc = NULL;
++		of_node_put(gc);
++	}
++
++	if (!of_gc) {
++		ret = -ENOENT;
++		goto err0;
++	}
++
++	ret = of_gc->xlate(of_gc, np, gpio_spec);
++	if (ret < 0)
++		goto err1;
++
++	ret += of_gc->gc.base;
++err1:
++	of_node_put(gc);
++err0:
++	pr_debug("%s exited with status %d\n", __func__, ret);
++	return ret;
++}
++EXPORT_SYMBOL(of_get_gpio);
++
++/**
++ * of_gpio_simple_xlate - translate gpio_spec to the GPIO number
++ * @of_gc:	pointer to the of_gpio_chip structure
++ * @np:		device node of the GPIO chip
++ * @gpio_spec:	gpio specifier as found in the device tree
++ *
++ * This is simple translation function, suitable for the most 1:1 mapped
++ * gpio chips. This function performs only one sanity check: whether gpio
++ * is less than ngpios (that is specified in the gpio_chip).
++ */
++int of_gpio_simple_xlate(struct of_gpio_chip *of_gc, struct device_node *np,
++			 const void *gpio_spec)
++{
++	const u32 *gpio = gpio_spec;
++
++	if (*gpio > of_gc->gc.ngpio)
++		return -EINVAL;
++
++	return *gpio;
++}
++EXPORT_SYMBOL(of_gpio_simple_xlate);
++
++/* Should be sufficient for now, later we'll use dynamic bases. */
++#if defined(CONFIG_PPC32) || defined(CONFIG_SPARC32)
++#define GPIOS_PER_CHIP 32
++#else
++#define GPIOS_PER_CHIP 64
++#endif
++
++static int of_get_gpiochip_base(struct device_node *np)
++{
++	struct device_node *gc = NULL;
++	int gpiochip_base = 0;
++
++	while ((gc = of_find_all_nodes(gc))) {
++		if (!of_get_property(gc, "gpio-controller", NULL))
++			continue;
++
++		if (gc != np) {
++			gpiochip_base += GPIOS_PER_CHIP;
++			continue;
++		}
++
++		of_node_put(gc);
++
++		if (gpiochip_base >= ARCH_NR_GPIOS)
++			return -ENOSPC;
++
++		return gpiochip_base;
++	}
++
++	return -ENOENT;
++}
++
++/**
++ * of_mm_gpiochip_add - Add memory mapped GPIO chip (bank)
++ * @np:		device node of the GPIO chip
++ * @mm_gc:	pointer to the of_mm_gpio_chip allocated structure
++ *
++ * To use this function you should allocate and fill mm_gc with:
++ *
++ * 1) In the gpio_chip structure:
++ *    - all the callbacks
++ *
++ * 2) In the of_gpio_chip structure:
++ *    - gpio_cells
++ *    - xlate callback (optional)
++ *
++ * 3) In the of_mm_gpio_chip structure:
++ *    - save_regs callback (optional)
++ *
++ * If succeeded, this function will map bank's memory and will
++ * do all necessary work for you. Then you'll able to use .regs
++ * to manage GPIOs from the callbacks.
++ */
++int of_mm_gpiochip_add(struct device_node *np,
++		       struct of_mm_gpio_chip *mm_gc)
++{
++	int ret = -ENOMEM;
++	struct of_gpio_chip *of_gc = &mm_gc->of_gc;
++	struct gpio_chip *gc = &of_gc->gc;
++
++	gc->label = kstrdup(np->full_name, GFP_KERNEL);
++	if (!gc->label)
++		goto err0;
++
++	mm_gc->regs = of_iomap(np, 0);
++	if (!mm_gc->regs)
++		goto err1;
++
++	gc->base = of_get_gpiochip_base(np);
++	if (gc->base < 0) {
++		ret = gc->base;
++		goto err1;
++	}
++
++	if (!of_gc->xlate)
++		of_gc->xlate = of_gpio_simple_xlate;
++
++	if (mm_gc->save_regs)
++		mm_gc->save_regs(mm_gc);
++
++	np->data = of_gc;
++
++	ret = gpiochip_add(gc);
++	if (ret)
++		goto err2;
++
++	/* We don't want to lose the node and its ->data */
++	of_node_get(np);
++
++	pr_debug("%s: registered as generic GPIO chip, base is %d\n",
++		 np->full_name, gc->base);
++	return 0;
++err2:
++	np->data = NULL;
++	iounmap(mm_gc->regs);
++err1:
++	kfree(gc->label);
++err0:
++	pr_err("%s: GPIO chip registration failed with status %d\n",
++	       np->full_name, ret);
++	return ret;
++}
++EXPORT_SYMBOL(of_mm_gpiochip_add);
+--- /dev/null
++++ b/drivers/of/i2c.c
+@@ -0,0 +1,115 @@
++/*
++ * OF helpers for the I2C API
++ *
++ * Copyright (c) 2008 Jochen Friedrich <jochen@scram.de>
++ *
++ * Based on a previous patch from Jon Smirl <jonsmirl@gmail.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#include <linux/i2c.h>
++#include <linux/of.h>
++
++struct i2c_driver_device {
++	char    *of_device;
++	char    *i2c_type;
++};
++
++static struct i2c_driver_device i2c_devices[] = {
++	{ "dallas,ds1374", "rtc-ds1374" },
++};
++
++static int of_find_i2c_driver(struct device_node *node,
++			      struct i2c_board_info *info)
++{
++	int i, cplen;
++	const char *compatible;
++	const char *p;
++
++	/* 1. search for exception list entry */
++	for (i = 0; i < ARRAY_SIZE(i2c_devices); i++) {
++		if (!of_device_is_compatible(node, i2c_devices[i].of_device))
++			continue;
++		if (strlcpy(info->type, i2c_devices[i].i2c_type,
++			    I2C_NAME_SIZE) >= I2C_NAME_SIZE)
++			return -ENOMEM;
++
++		return 0;
++	}
++
++	compatible = of_get_property(node, "compatible", &cplen);
++	if (!compatible)
++		return -ENODEV;
++
++	/* 2. search for linux,<i2c-type> entry */
++	p = compatible;
++	while (cplen > 0) {
++		if (!strncmp(p, "linux,", 6)) {
++			p += 6;
++			if (strlcpy(info->type, p,
++				    I2C_NAME_SIZE) >= I2C_NAME_SIZE)
++				return -ENOMEM;
++			return 0;
++		}
++
++		i = strlen(p) + 1;
++		p += i;
++		cplen -= i;
++	}
++
++	/* 3. take fist compatible entry and strip manufacturer */
++	p = strchr(compatible, ',');
++	if (!p)
++		return -ENODEV;
++	p++;
++	if (strlcpy(info->type, p, I2C_NAME_SIZE) >= I2C_NAME_SIZE)
++		return -ENOMEM;
++	return 0;
++}
++
++void of_register_i2c_devices(struct i2c_adapter *adap,
++			     struct device_node *adap_node)
++{
++	void *result;
++	struct device_node *node;
++
++	for_each_child_of_node(adap_node, node) {
++		struct i2c_board_info info = {};
++		const u32 *addr;
++		int len;
++
++		addr = of_get_property(node, "reg", &len);
++		if (!addr || len < sizeof(int) || *addr > (1 << 10) - 1) {
++			printk(KERN_ERR
++			       "of-i2c: invalid i2c device entry\n");
++			continue;
++		}
++
++		info.irq = irq_of_parse_and_map(node, 0);
++		if (info.irq == NO_IRQ)
++			info.irq = -1;
++
++		if (of_find_i2c_driver(node, &info) < 0) {
++			irq_dispose_mapping(info.irq);
++			continue;
++		}
++
++		info.addr = *addr;
++
++		request_module(info.type);
++
++		result = i2c_new_device(adap, &info);
++		if (result == NULL) {
++			printk(KERN_ERR
++			       "of-i2c: Failed to load driver for %s\n",
++			       info.type);
++			irq_dispose_mapping(info.irq);
++			continue;
++		}
++	}
++}
++EXPORT_SYMBOL(of_register_i2c_devices);
+--- a/drivers/ps3/ps3-sys-manager.c
++++ b/drivers/ps3/ps3-sys-manager.c
+@@ -24,6 +24,7 @@
+ #include <linux/reboot.h>
+ 
+ #include <asm/firmware.h>
++#include <asm/lv1call.h>
+ #include <asm/ps3.h>
+ 
+ #include "vuart.h"
+@@ -187,6 +188,7 @@ enum ps3_sys_manager_next_op {
+  * controller, and bluetooth controller.
+  * @PS3_SM_WAKE_RTC:
+  * @PS3_SM_WAKE_RTC_ERROR:
++ * @PS3_SM_WAKE_W_O_L: Ether or wireless LAN.
+  * @PS3_SM_WAKE_P_O_R: Power on reset.
+  *
+  * Additional wakeup sources when specifying PS3_SM_NEXT_OP_SYS_SHUTDOWN.
+@@ -200,10 +202,19 @@ enum ps3_sys_manager_wake_source {
+ 	PS3_SM_WAKE_DEFAULT   = 0,
+ 	PS3_SM_WAKE_RTC       = 0x00000040,
+ 	PS3_SM_WAKE_RTC_ERROR = 0x00000080,
++	PS3_SM_WAKE_W_O_L     = 0x00000400,
+ 	PS3_SM_WAKE_P_O_R     = 0x80000000,
+ };
+ 
+ /**
++ * user_wake_sources - User specified wakeup sources.
++ *
++ * Logical OR of enum ps3_sys_manager_wake_source types.
++ */
++
++static u32 user_wake_sources = PS3_SM_WAKE_DEFAULT;
++
++/**
+  * enum ps3_sys_manager_cmd - Command from system manager to guest.
+  *
+  * The guest completes the actions needed, then acks or naks the command via
+@@ -581,6 +592,23 @@ fail_id:
+ 	return -EIO;
+ }
+ 
++static void ps3_sys_manager_fin(struct ps3_system_bus_device *dev)
++{
++	ps3_sys_manager_send_request_shutdown(dev);
++
++	pr_emerg("System Halted, OK to turn off power\n");
++
++	while (ps3_sys_manager_handle_msg(dev)) {
++		/* pause until next DEC interrupt */
++		lv1_pause(0);
++	}
++
++	while (1) {
++		/* pause, ignoring DEC interrupt */
++		lv1_pause(1);
++	}
++}
++
+ /**
+  * ps3_sys_manager_final_power_off - The final platform machine_power_off routine.
+  *
+@@ -601,13 +629,9 @@ static void ps3_sys_manager_final_power_
+ 	ps3_vuart_cancel_async(dev);
+ 
+ 	ps3_sys_manager_send_next_op(dev, PS3_SM_NEXT_OP_SYS_SHUTDOWN,
+-		PS3_SM_WAKE_DEFAULT);
+-	ps3_sys_manager_send_request_shutdown(dev);
+-
+-	pr_emerg("System Halted, OK to turn off power\n");
++		user_wake_sources);
+ 
+-	while (1)
+-		ps3_sys_manager_handle_msg(dev);
++	ps3_sys_manager_fin(dev);
+ }
+ 
+ /**
+@@ -638,14 +662,42 @@ static void ps3_sys_manager_final_restar
+ 
+ 	ps3_sys_manager_send_attr(dev, 0);
+ 	ps3_sys_manager_send_next_op(dev, PS3_SM_NEXT_OP_SYS_REBOOT,
+-		PS3_SM_WAKE_DEFAULT);
+-	ps3_sys_manager_send_request_shutdown(dev);
++		user_wake_sources);
+ 
+-	pr_emerg("System Halted, OK to turn off power\n");
++	ps3_sys_manager_fin(dev);
++}
++
++/**
++ * ps3_sys_manager_get_wol - Get wake-on-lan setting.
++ */
++
++int ps3_sys_manager_get_wol(void)
++{
++	pr_debug("%s:%d\n", __func__, __LINE__);
++
++	return (user_wake_sources & PS3_SM_WAKE_W_O_L) != 0;
++}
++EXPORT_SYMBOL_GPL(ps3_sys_manager_get_wol);
++
++/**
++ * ps3_sys_manager_set_wol - Set wake-on-lan setting.
++ */
++
++void ps3_sys_manager_set_wol(int state)
++{
++	static DEFINE_MUTEX(mutex);
++
++	mutex_lock(&mutex);
++
++	pr_debug("%s:%d: %d\n", __func__, __LINE__, state);
+ 
+-	while (1)
+-		ps3_sys_manager_handle_msg(dev);
++	if (state)
++		user_wake_sources |= PS3_SM_WAKE_W_O_L;
++	else
++		user_wake_sources &= ~PS3_SM_WAKE_W_O_L;
++	mutex_unlock(&mutex);
+ }
++EXPORT_SYMBOL_GPL(ps3_sys_manager_set_wol);
+ 
+ /**
+  * ps3_sys_manager_work - Asynchronous read handler.
+--- a/drivers/ps3/sys-manager-core.c
++++ b/drivers/ps3/sys-manager-core.c
+@@ -19,6 +19,7 @@
+  */
+ 
+ #include <linux/kernel.h>
++#include <asm/lv1call.h>
+ #include <asm/ps3.h>
+ 
+ /**
+@@ -50,10 +51,7 @@ void ps3_sys_manager_power_off(void)
+ 	if (ps3_sys_manager_ops.power_off)
+ 		ps3_sys_manager_ops.power_off(ps3_sys_manager_ops.dev);
+ 
+-	printk(KERN_EMERG "System Halted, OK to turn off power\n");
+-	local_irq_disable();
+-	while (1)
+-		(void)0;
++	ps3_sys_manager_halt();
+ }
+ 
+ void ps3_sys_manager_restart(void)
+@@ -61,8 +59,14 @@ void ps3_sys_manager_restart(void)
+ 	if (ps3_sys_manager_ops.restart)
+ 		ps3_sys_manager_ops.restart(ps3_sys_manager_ops.dev);
+ 
+-	printk(KERN_EMERG "System Halted, OK to turn off power\n");
++	ps3_sys_manager_halt();
++}
++
++void ps3_sys_manager_halt(void)
++{
++	pr_emerg("System Halted, OK to turn off power\n");
+ 	local_irq_disable();
+ 	while (1)
+-		(void)0;
++		lv1_pause(1);
+ }
++
+--- a/drivers/serial/cpm_uart/cpm_uart.h
++++ b/drivers/serial/cpm_uart/cpm_uart.h
+@@ -92,6 +92,9 @@ extern struct uart_cpm_port cpm_uart_por
+ 
+ /* these are located in their respective files */
+ void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd);
++void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port,
++				struct device_node *np);
++void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram);
+ int cpm_uart_init_portdesc(void);
+ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con);
+ void cpm_uart_freebuf(struct uart_cpm_port *pinfo);
+--- a/drivers/serial/cpm_uart/cpm_uart_core.c
++++ b/drivers/serial/cpm_uart/cpm_uart_core.c
+@@ -966,24 +966,23 @@ static int cpm_uart_init_port(struct dev
+ 	if (!mem)
+ 		return -ENOMEM;
+ 
+-	pram = of_iomap(np, 1);
+-	if (!pram) {
+-		ret = -ENOMEM;
+-		goto out_mem;
+-	}
+-
+ 	if (of_device_is_compatible(np, "fsl,cpm1-scc-uart") ||
+ 	    of_device_is_compatible(np, "fsl,cpm2-scc-uart")) {
+ 		pinfo->sccp = mem;
+-		pinfo->sccup = pram;
++		pinfo->sccup = pram = cpm_uart_map_pram(pinfo, np);
+ 	} else if (of_device_is_compatible(np, "fsl,cpm1-smc-uart") ||
+ 	           of_device_is_compatible(np, "fsl,cpm2-smc-uart")) {
+ 		pinfo->flags |= FLAG_SMC;
+ 		pinfo->smcp = mem;
+-		pinfo->smcup = pram;
++		pinfo->smcup = pram = cpm_uart_map_pram(pinfo, np);
+ 	} else {
+ 		ret = -ENODEV;
+-		goto out_pram;
++		goto out_mem;
++	}
++
++	if (!pram) {
++		ret = -ENOMEM;
++		goto out_mem;
+ 	}
+ 
+ 	pinfo->tx_nrfifos = TX_NUM_FIFO;
+@@ -1007,7 +1006,7 @@ static int cpm_uart_init_port(struct dev
+ 	return cpm_uart_request_port(&pinfo->port);
+ 
+ out_pram:
+-	iounmap(pram);
++	cpm_uart_unmap_pram(pinfo, pram);
+ out_mem:
+ 	iounmap(mem);
+ 	return ret;
+--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
++++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+@@ -45,6 +45,8 @@
+ #include <linux/serial_core.h>
+ #include <linux/kernel.h>
+ 
++#include <linux/of.h>
++
+ #include "cpm_uart.h"
+ 
+ /**************************************************************/
+@@ -54,6 +56,18 @@ void cpm_line_cr_cmd(struct uart_cpm_por
+ {
+ 	cpm_command(port->command, cmd);
+ }
++
++void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port,
++				struct device_node *np)
++{
++	return of_iomap(np, 1);
++}
++
++void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram)
++{
++	iounmap(pram);
++}
++
+ #else
+ void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
+ {
+--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
++++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+@@ -41,6 +41,9 @@
+ #include <asm/io.h>
+ #include <asm/irq.h>
+ #include <asm/fs_pd.h>
++#ifdef CONFIG_PPC_CPM_NEW_BINDING
++#include <asm/prom.h>
++#endif
+ 
+ #include <linux/serial_core.h>
+ #include <linux/kernel.h>
+@@ -54,6 +57,55 @@ void cpm_line_cr_cmd(struct uart_cpm_por
+ {
+ 	cpm_command(port->command, cmd);
+ }
++
++void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port,
++				struct device_node *np)
++{
++	void __iomem *pram;
++	unsigned long offset;
++	struct resource res;
++	unsigned long len;
++
++	/* Don't remap parameter RAM if it has already been initialized
++	 * during console setup.
++	 */
++	if (IS_SMC(port) && port->smcup)
++		return port->smcup;
++	else if (!IS_SMC(port) && port->sccup)
++		return port->sccup;
++
++	if (of_address_to_resource(np, 1, &res))
++		return NULL;
++
++	len = 1 + res.end - res.start;
++	pram = ioremap(res.start, len);
++	if (!pram)
++		return NULL;
++
++	if (!IS_SMC(port))
++		return pram;
++
++	if (len != 2) {
++		printk(KERN_WARNING "cpm_uart[%d]: device tree references "
++			"SMC pram, using boot loader/wrapper pram mapping. "
++			"Please fix your device tree to reference the pram "
++			"base register instead.\n",
++			port->port.line);
++		return pram;
++	}
++
++	offset = cpm_dpalloc(PROFF_SMC_SIZE, 64);
++	out_be16(pram, offset);
++	iounmap(pram);
++	return cpm_muram_addr(offset);
++}
++
++void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram)
++{
++	if (!IS_SMC(port))
++		iounmap(pram);
++}
++
+ #else
+ void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
+ {
+--- a/drivers/serial/of_serial.c
++++ b/drivers/serial/of_serial.c
+@@ -56,7 +56,9 @@ static int __devinit of_platform_serial_
+ 	port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
+ 		| UPF_FIXED_PORT;
+ 	port->dev = &ofdev->dev;
+-	port->custom_divisor = *clk / (16 * (*spd));
++	/* If current-speed was set, then try not to change it. */
++	if (spd)
++		port->custom_divisor = *clk / (16 * (*spd));
+ 
+ 	return 0;
+ }
+--- a/drivers/serial/ucc_uart.c
++++ b/drivers/serial/ucc_uart.c
+@@ -1270,10 +1270,18 @@ static int ucc_uart_probe(struct of_devi
+ 
+ 	/* Get the UCC number (device ID) */
+ 	/* UCCs are numbered 1-7 */
+-	iprop = of_get_property(np, "device-id", NULL);
+-	if (!iprop || (*iprop < 1) || (*iprop > UCC_MAX_NUM)) {
+-		dev_err(&ofdev->dev,
+-			"missing or invalid UCC specified in device tree\n");
++	iprop = of_get_property(np, "cell-index", NULL);
++	if (!iprop) {
++		iprop = of_get_property(np, "device-id", NULL);
++		if (!iprop) {
++			dev_err(&ofdev->dev, "UCC is unspecified in "
++				"device tree\n");
++			return -EINVAL;
++		}
++	}
++
++	if ((*iprop < 1) || (*iprop > UCC_MAX_NUM)) {
++		dev_err(&ofdev->dev, "no support for UCC%u\n", *iprop);
+ 		kfree(qe_port);
+ 		return -ENODEV;
+ 	}
+--- a/include/asm-powerpc/Kbuild
++++ b/include/asm-powerpc/Kbuild
+@@ -1,5 +1,6 @@
+ include include/asm-generic/Kbuild.asm
+ 
++header-y += a.out.h
+ header-y += auxvec.h
+ header-y += ioctls.h
+ header-y += mman.h
+@@ -23,7 +24,6 @@ header-y += sigcontext.h
+ header-y += statfs.h
+ header-y += ps3fb.h
+ 
+-unifdef-y += a.out.h
+ unifdef-y += asm-compat.h
+ unifdef-y += bootx.h
+ unifdef-y += byteorder.h
+--- a/include/asm-powerpc/abs_addr.h
++++ b/include/asm-powerpc/abs_addr.h
+@@ -12,10 +12,11 @@
+  * 2 of the License, or (at your option) any later version.
+  */
+ 
++#include <linux/lmb.h>
++
+ #include <asm/types.h>
+ #include <asm/page.h>
+ #include <asm/prom.h>
+-#include <asm/lmb.h>
+ #include <asm/firmware.h>
+ 
+ struct mschunks_map {
+--- a/include/asm-powerpc/bitops.h
++++ b/include/asm-powerpc/bitops.h
+@@ -312,24 +312,26 @@ static __inline__ int fls(unsigned int x
+ 	asm ("cntlzw %0,%1" : "=r" (lz) : "r" (x));
+ 	return 32 - lz;
+ }
++
++/*
++ * 64-bit can do this using one cntlzd (count leading zeroes doubleword)
++ * instruction; for 32-bit we use the generic version, which does two
++ * 32-bit fls calls.
++ */
++#ifdef __powerpc64__
++static __inline__ int fls64(__u64 x)
++{
++	int lz;
++
++	asm ("cntlzd %0,%1" : "=r" (lz) : "r" (x));
++	return 64 - lz;
++}
++#else
+ #include <asm-generic/bitops/fls64.h>
++#endif /* __powerpc64__ */
+ 
+ #include <asm-generic/bitops/hweight.h>
+-
+-#define find_first_zero_bit(addr, size) find_next_zero_bit((addr), (size), 0)
+-unsigned long find_next_zero_bit(const unsigned long *addr,
+-				 unsigned long size, unsigned long offset);
+-/**
+- * find_first_bit - find the first set bit in a memory region
+- * @addr: The address to start the search at
+- * @size: The maximum size to search
+- *
+- * Returns the bit-number of the first set bit, not the number of the byte
+- * containing a bit.
+- */
+-#define find_first_bit(addr, size) find_next_bit((addr), (size), 0)
+-unsigned long find_next_bit(const unsigned long *addr,
+-			    unsigned long size, unsigned long offset);
++#include <asm-generic/bitops/find.h>
+ 
+ /* Little-endian versions */
+ 
+--- a/include/asm-powerpc/cpm.h
++++ b/include/asm-powerpc/cpm.h
+@@ -4,6 +4,20 @@
+ #include <linux/compiler.h>
+ #include <linux/types.h>
+ 
++/* Opcodes common to CPM1 and CPM2
++*/
++#define CPM_CR_INIT_TRX		((ushort)0x0000)
++#define CPM_CR_INIT_RX		((ushort)0x0001)
++#define CPM_CR_INIT_TX		((ushort)0x0002)
++#define CPM_CR_HUNT_MODE	((ushort)0x0003)
++#define CPM_CR_STOP_TX		((ushort)0x0004)
++#define CPM_CR_GRA_STOP_TX	((ushort)0x0005)
++#define CPM_CR_RESTART_TX	((ushort)0x0006)
++#define CPM_CR_CLOSE_RX_BD	((ushort)0x0007)
++#define CPM_CR_SET_GADDR	((ushort)0x0008)
++#define CPM_CR_SET_TIMER	((ushort)0x0008)
++#define CPM_CR_STOP_IDMA	((ushort)0x000b)
++
+ /* Buffer descriptors used by many of the CPM protocols. */
+ typedef struct cpm_buf_desc {
+ 	ushort	cbd_sc;		/* Status and Control */
+--- a/include/asm-powerpc/cpm1.h
++++ b/include/asm-powerpc/cpm1.h
+@@ -28,19 +28,6 @@
+ #define CPM_CR_CHAN	((ushort)0x00f0)
+ #define CPM_CR_FLG	((ushort)0x0001)
+ 
+-/* Some commands (there are more...later)
+-*/
+-#define CPM_CR_INIT_TRX		((ushort)0x0000)
+-#define CPM_CR_INIT_RX		((ushort)0x0001)
+-#define CPM_CR_INIT_TX		((ushort)0x0002)
+-#define CPM_CR_HUNT_MODE	((ushort)0x0003)
+-#define CPM_CR_STOP_TX		((ushort)0x0004)
+-#define CPM_CR_GRA_STOP_TX	((ushort)0x0005)
+-#define CPM_CR_RESTART_TX	((ushort)0x0006)
+-#define CPM_CR_CLOSE_RX_BD	((ushort)0x0007)
+-#define CPM_CR_SET_GADDR	((ushort)0x0008)
+-#define CPM_CR_SET_TIMER	CPM_CR_SET_GADDR
+-
+ /* Channel numbers.
+ */
+ #define CPM_CR_CH_SCC1		((ushort)0x0000)
+--- a/include/asm-powerpc/cpm2.h
++++ b/include/asm-powerpc/cpm2.h
+@@ -71,18 +71,9 @@
+ 
+ #define CPM_CR_FCC_PAGE(x)	(x + 0x04)
+ 
+-/* Some opcodes (there are more...later)
++/* CPM2-specific opcodes (see cpm.h for common opcodes)
+ */
+-#define CPM_CR_INIT_TRX		((ushort)0x0000)
+-#define CPM_CR_INIT_RX		((ushort)0x0001)
+-#define CPM_CR_INIT_TX		((ushort)0x0002)
+-#define CPM_CR_HUNT_MODE	((ushort)0x0003)
+-#define CPM_CR_STOP_TX		((ushort)0x0004)
+-#define CPM_CR_GRA_STOP_TX	((ushort)0x0005)
+-#define CPM_CR_RESTART_TX	((ushort)0x0006)
+-#define CPM_CR_SET_GADDR	((ushort)0x0008)
+ #define CPM_CR_START_IDMA	((ushort)0x0009)
+-#define CPM_CR_STOP_IDMA	((ushort)0x000b)
+ 
+ #define mk_cr_cmd(PG, SBC, MCN, OP) \
+ 	((PG << 26) | (SBC << 21) | (MCN << 6) | OP)
+--- a/include/asm-powerpc/cputhreads.h
++++ b/include/asm-powerpc/cputhreads.h
+@@ -35,7 +35,7 @@ static inline cpumask_t cpu_thread_mask_
+ 
+ 	res = CPU_MASK_NONE;
+ 	for (i = 0; i < NR_CPUS; i += threads_per_core) {
+-		cpus_shift_right(tmp, threads_core_mask, i);
++		cpus_shift_left(tmp, threads_core_mask, i);
+ 		if (cpus_intersects(threads, tmp))
+ 			cpu_set(i, res);
+ 	}
+--- a/include/asm-powerpc/dcr-native.h
++++ b/include/asm-powerpc/dcr-native.h
+@@ -82,6 +82,19 @@ static inline void __mtdcri(int base_add
+ 	spin_unlock_irqrestore(&dcr_ind_lock, flags);
+ }
+ 
++static inline void __dcri_clrset(int base_addr, int base_data, int reg,
++				 unsigned clr, unsigned set)
++{
++	unsigned long flags;
++	unsigned int val;
++
++	spin_lock_irqsave(&dcr_ind_lock, flags);
++	__mtdcr(base_addr, reg);
++	val = (__mfdcr(base_data) & ~clr) | set;
++	__mtdcr(base_data, val);
++	spin_unlock_irqrestore(&dcr_ind_lock, flags);
++}
++
+ #define mfdcri(base, reg)	__mfdcri(DCRN_ ## base ## _CONFIG_ADDR,	\
+ 					 DCRN_ ## base ## _CONFIG_DATA,	\
+ 					 reg)
+@@ -90,6 +103,10 @@ static inline void __mtdcri(int base_add
+ 					 DCRN_ ## base ## _CONFIG_DATA,	\
+ 					 reg, data)
+ 
++#define dcri_clrset(base, reg, clr, set)	__dcri_clrset(DCRN_ ## base ## _CONFIG_ADDR,	\
++							      DCRN_ ## base ## _CONFIG_DATA,	\
++							      reg, clr, set)
++
+ #endif /* __ASSEMBLY__ */
+ #endif /* __KERNEL__ */
+ #endif /* _ASM_POWERPC_DCR_NATIVE_H */
+--- a/include/asm-powerpc/dcr-regs.h
++++ b/include/asm-powerpc/dcr-regs.h
+@@ -68,4 +68,82 @@
+ #define SDR0_UART3		0x0123
+ #define SDR0_CUST0		0x4000
+ 
++/*
++ * All those DCR register addresses are offsets from the base address
++ * for the SRAM0 controller (e.g. 0x20 on 440GX). The base address is
++ * excluded here and configured in the device tree.
++ */
++#define DCRN_SRAM0_SB0CR	0x00
++#define DCRN_SRAM0_SB1CR	0x01
++#define DCRN_SRAM0_SB2CR	0x02
++#define DCRN_SRAM0_SB3CR	0x03
++#define  SRAM_SBCR_BU_MASK	0x00000180
++#define  SRAM_SBCR_BS_64KB	0x00000800
++#define  SRAM_SBCR_BU_RO	0x00000080
++#define  SRAM_SBCR_BU_RW	0x00000180
++#define DCRN_SRAM0_BEAR		0x04
++#define DCRN_SRAM0_BESR0	0x05
++#define DCRN_SRAM0_BESR1	0x06
++#define DCRN_SRAM0_PMEG		0x07
++#define DCRN_SRAM0_CID		0x08
++#define DCRN_SRAM0_REVID	0x09
++#define DCRN_SRAM0_DPC		0x0a
++#define  SRAM_DPC_ENABLE	0x80000000
++
++/*
++ * All those DCR register addresses are offsets from the base address
++ * for the SRAM0 controller (e.g. 0x30 on 440GX). The base address is
++ * excluded here and configured in the device tree.
++ */
++#define DCRN_L2C0_CFG		0x00
++#define  L2C_CFG_L2M		0x80000000
++#define  L2C_CFG_ICU		0x40000000
++#define  L2C_CFG_DCU		0x20000000
++#define  L2C_CFG_DCW_MASK	0x1e000000
++#define  L2C_CFG_TPC		0x01000000
++#define  L2C_CFG_CPC		0x00800000
++#define  L2C_CFG_FRAN		0x00200000
++#define  L2C_CFG_SS_MASK	0x00180000
++#define  L2C_CFG_SS_256		0x00000000
++#define  L2C_CFG_CPIM		0x00040000
++#define  L2C_CFG_TPIM		0x00020000
++#define  L2C_CFG_LIM		0x00010000
++#define  L2C_CFG_PMUX_MASK	0x00007000
++#define  L2C_CFG_PMUX_SNP	0x00000000
++#define  L2C_CFG_PMUX_IF	0x00001000
++#define  L2C_CFG_PMUX_DF	0x00002000
++#define  L2C_CFG_PMUX_DS	0x00003000
++#define  L2C_CFG_PMIM		0x00000800
++#define  L2C_CFG_TPEI		0x00000400
++#define  L2C_CFG_CPEI		0x00000200
++#define  L2C_CFG_NAM		0x00000100
++#define  L2C_CFG_SMCM		0x00000080
++#define  L2C_CFG_NBRM		0x00000040
++#define  L2C_CFG_RDBW		0x00000008	/* only 460EX/GT */
++#define DCRN_L2C0_CMD		0x01
++#define  L2C_CMD_CLR		0x80000000
++#define  L2C_CMD_DIAG		0x40000000
++#define  L2C_CMD_INV		0x20000000
++#define  L2C_CMD_CCP		0x10000000
++#define  L2C_CMD_CTE		0x08000000
++#define  L2C_CMD_STRC		0x04000000
++#define  L2C_CMD_STPC		0x02000000
++#define  L2C_CMD_RPMC		0x01000000
++#define  L2C_CMD_HCC		0x00800000
++#define DCRN_L2C0_ADDR		0x02
++#define DCRN_L2C0_DATA		0x03
++#define DCRN_L2C0_SR		0x04
++#define  L2C_SR_CC		0x80000000
++#define  L2C_SR_CPE		0x40000000
++#define  L2C_SR_TPE		0x20000000
++#define  L2C_SR_LRU		0x10000000
++#define  L2C_SR_PCS		0x08000000
++#define DCRN_L2C0_REVID		0x05
++#define DCRN_L2C0_SNP0		0x06
++#define DCRN_L2C0_SNP1		0x07
++#define  L2C_SNP_BA_MASK	0xffff0000
++#define  L2C_SNP_SSR_MASK	0x0000f000
++#define  L2C_SNP_SSR_32G	0x0000f000
++#define  L2C_SNP_ESR		0x00000800
++
+ #endif /* __DCR_REGS_H__ */
+--- a/include/asm-powerpc/exception.h
++++ b/include/asm-powerpc/exception.h
+@@ -228,18 +228,18 @@ label##_pSeries:							\
+ BEGIN_FW_FTR_SECTION;				\
+ 	stb	r11,PACAHARDIRQEN(r13);		\
+ END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES);	\
++	TRACE_DISABLE_INTS;			\
+ BEGIN_FW_FTR_SECTION;				\
+ 	mfmsr	r10;				\
+ 	ori	r10,r10,MSR_EE;			\
+ 	mtmsrd	r10,1;				\
+ END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
+-
+ #else
+ #define DISABLE_INTS				\
+ 	li	r11,0;				\
+ 	stb	r11,PACASOFTIRQEN(r13);		\
+-	stb	r11,PACAHARDIRQEN(r13)
+-
++	stb	r11,PACAHARDIRQEN(r13);		\
++	TRACE_DISABLE_INTS
+ #endif /* CONFIG_PPC_ISERIES */
+ 
+ #define ENABLE_INTS				\
+--- /dev/null
++++ b/include/asm-powerpc/fsl_lbc.h
+@@ -0,0 +1,311 @@
++/* Freescale Local Bus Controller
++ *
++ * Copyright (c) 2006-2007 Freescale Semiconductor
++ *
++ * Authors: Nick Spence <nick.spence@freescale.com>,
++ *          Scott Wood <scottwood@freescale.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++#ifndef __ASM_FSL_LBC_H
++#define __ASM_FSL_LBC_H
++
++#include <linux/types.h>
++#include <linux/spinlock.h>
++#include <asm/io.h>
++
++struct fsl_lbc_bank {
++	__be32 br;             /**< Base Register  */
++#define BR_BA           0xFFFF8000
++#define BR_BA_SHIFT             15
++#define BR_PS           0x00001800
++#define BR_PS_SHIFT             11
++#define BR_PS_8         0x00000800  /* Port Size 8 bit */
++#define BR_PS_16        0x00001000  /* Port Size 16 bit */
++#define BR_PS_32        0x00001800  /* Port Size 32 bit */
++#define BR_DECC         0x00000600
++#define BR_DECC_SHIFT            9
++#define BR_DECC_OFF     0x00000000  /* HW ECC checking and generation off */
++#define BR_DECC_CHK     0x00000200  /* HW ECC checking on, generation off */
++#define BR_DECC_CHK_GEN 0x00000400  /* HW ECC checking and generation on */
++#define BR_WP           0x00000100
++#define BR_WP_SHIFT              8
++#define BR_MSEL         0x000000E0
++#define BR_MSEL_SHIFT            5
++#define BR_MS_GPCM      0x00000000  /* GPCM */
++#define BR_MS_FCM       0x00000020  /* FCM */
++#define BR_MS_SDRAM     0x00000060  /* SDRAM */
++#define BR_MS_UPMA      0x00000080  /* UPMA */
++#define BR_MS_UPMB      0x000000A0  /* UPMB */
++#define BR_MS_UPMC      0x000000C0  /* UPMC */
++#define BR_V            0x00000001
++#define BR_V_SHIFT               0
++#define BR_RES          ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V)
++
++	__be32 or;             /**< Base Register  */
++#define OR0 0x5004
++#define OR1 0x500C
++#define OR2 0x5014
++#define OR3 0x501C
++#define OR4 0x5024
++#define OR5 0x502C
++#define OR6 0x5034
++#define OR7 0x503C
++
++#define OR_FCM_AM               0xFFFF8000
++#define OR_FCM_AM_SHIFT                 15
++#define OR_FCM_BCTLD            0x00001000
++#define OR_FCM_BCTLD_SHIFT              12
++#define OR_FCM_PGS              0x00000400
++#define OR_FCM_PGS_SHIFT                10
++#define OR_FCM_CSCT             0x00000200
++#define OR_FCM_CSCT_SHIFT                9
++#define OR_FCM_CST              0x00000100
++#define OR_FCM_CST_SHIFT                 8
++#define OR_FCM_CHT              0x00000080
++#define OR_FCM_CHT_SHIFT                 7
++#define OR_FCM_SCY              0x00000070
++#define OR_FCM_SCY_SHIFT                 4
++#define OR_FCM_SCY_1            0x00000010
++#define OR_FCM_SCY_2            0x00000020
++#define OR_FCM_SCY_3            0x00000030
++#define OR_FCM_SCY_4            0x00000040
++#define OR_FCM_SCY_5            0x00000050
++#define OR_FCM_SCY_6            0x00000060
++#define OR_FCM_SCY_7            0x00000070
++#define OR_FCM_RST              0x00000008
++#define OR_FCM_RST_SHIFT                 3
++#define OR_FCM_TRLX             0x00000004
++#define OR_FCM_TRLX_SHIFT                2
++#define OR_FCM_EHTR             0x00000002
++#define OR_FCM_EHTR_SHIFT                1
++};
++
++struct fsl_lbc_regs {
++	struct fsl_lbc_bank bank[8];
++	u8 res0[0x28];
++	__be32 mar;             /**< UPM Address Register */
++	u8 res1[0x4];
++	__be32 mamr;            /**< UPMA Mode Register */
++#define MxMR_OP_NO	(0 << 28) /**< normal operation */
++#define MxMR_OP_WA	(1 << 28) /**< write array */
++#define MxMR_OP_RA	(2 << 28) /**< read array */
++#define MxMR_OP_RP	(3 << 28) /**< run pattern */
++#define MxMR_MAD	0x3f      /**< machine address */
++	__be32 mbmr;            /**< UPMB Mode Register */
++	__be32 mcmr;            /**< UPMC Mode Register */
++	u8 res2[0x8];
++	__be32 mrtpr;           /**< Memory Refresh Timer Prescaler Register */
++	__be32 mdr;             /**< UPM Data Register */
++	u8 res3[0x4];
++	__be32 lsor;            /**< Special Operation Initiation Register */
++	__be32 lsdmr;           /**< SDRAM Mode Register */
++	u8 res4[0x8];
++	__be32 lurt;            /**< UPM Refresh Timer */
++	__be32 lsrt;            /**< SDRAM Refresh Timer */
++	u8 res5[0x8];
++	__be32 ltesr;           /**< Transfer Error Status Register */
++#define LTESR_BM   0x80000000
++#define LTESR_FCT  0x40000000
++#define LTESR_PAR  0x20000000
++#define LTESR_WP   0x04000000
++#define LTESR_ATMW 0x00800000
++#define LTESR_ATMR 0x00400000
++#define LTESR_CS   0x00080000
++#define LTESR_CC   0x00000001
++#define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC)
++	__be32 ltedr;           /**< Transfer Error Disable Register */
++	__be32 lteir;           /**< Transfer Error Interrupt Register */
++	__be32 lteatr;          /**< Transfer Error Attributes Register */
++	__be32 ltear;           /**< Transfer Error Address Register */
++	u8 res6[0xC];
++	__be32 lbcr;            /**< Configuration Register */
++#define LBCR_LDIS  0x80000000
++#define LBCR_LDIS_SHIFT    31
++#define LBCR_BCTLC 0x00C00000
++#define LBCR_BCTLC_SHIFT   22
++#define LBCR_AHD   0x00200000
++#define LBCR_LPBSE 0x00020000
++#define LBCR_LPBSE_SHIFT   17
++#define LBCR_EPAR  0x00010000
++#define LBCR_EPAR_SHIFT    16
++#define LBCR_BMT   0x0000FF00
++#define LBCR_BMT_SHIFT      8
++#define LBCR_INIT  0x00040000
++	__be32 lcrr;            /**< Clock Ratio Register */
++#define LCRR_DBYP    0x80000000
++#define LCRR_DBYP_SHIFT      31
++#define LCRR_BUFCMDC 0x30000000
++#define LCRR_BUFCMDC_SHIFT   28
++#define LCRR_ECL     0x03000000
++#define LCRR_ECL_SHIFT       24
++#define LCRR_EADC    0x00030000
++#define LCRR_EADC_SHIFT      16
++#define LCRR_CLKDIV  0x0000000F
++#define LCRR_CLKDIV_SHIFT     0
++	u8 res7[0x8];
++	__be32 fmr;             /**< Flash Mode Register */
++#define FMR_CWTO     0x0000F000
++#define FMR_CWTO_SHIFT       12
++#define FMR_BOOT     0x00000800
++#define FMR_ECCM     0x00000100
++#define FMR_AL       0x00000030
++#define FMR_AL_SHIFT          4
++#define FMR_OP       0x00000003
++#define FMR_OP_SHIFT          0
++	__be32 fir;             /**< Flash Instruction Register */
++#define FIR_OP0      0xF0000000
++#define FIR_OP0_SHIFT        28
++#define FIR_OP1      0x0F000000
++#define FIR_OP1_SHIFT        24
++#define FIR_OP2      0x00F00000
++#define FIR_OP2_SHIFT        20
++#define FIR_OP3      0x000F0000
++#define FIR_OP3_SHIFT        16
++#define FIR_OP4      0x0000F000
++#define FIR_OP4_SHIFT        12
++#define FIR_OP5      0x00000F00
++#define FIR_OP5_SHIFT         8
++#define FIR_OP6      0x000000F0
++#define FIR_OP6_SHIFT         4
++#define FIR_OP7      0x0000000F
++#define FIR_OP7_SHIFT         0
++#define FIR_OP_NOP   0x0	/* No operation and end of sequence */
++#define FIR_OP_CA    0x1        /* Issue current column address */
++#define FIR_OP_PA    0x2        /* Issue current block+page address */
++#define FIR_OP_UA    0x3        /* Issue user defined address */
++#define FIR_OP_CM0   0x4        /* Issue command from FCR[CMD0] */
++#define FIR_OP_CM1   0x5        /* Issue command from FCR[CMD1] */
++#define FIR_OP_CM2   0x6        /* Issue command from FCR[CMD2] */
++#define FIR_OP_CM3   0x7        /* Issue command from FCR[CMD3] */
++#define FIR_OP_WB    0x8        /* Write FBCR bytes from FCM buffer */
++#define FIR_OP_WS    0x9        /* Write 1 or 2 bytes from MDR[AS] */
++#define FIR_OP_RB    0xA        /* Read FBCR bytes to FCM buffer */
++#define FIR_OP_RS    0xB        /* Read 1 or 2 bytes to MDR[AS] */
++#define FIR_OP_CW0   0xC        /* Wait then issue FCR[CMD0] */
++#define FIR_OP_CW1   0xD        /* Wait then issue FCR[CMD1] */
++#define FIR_OP_RBW   0xE        /* Wait then read FBCR bytes */
++#define FIR_OP_RSW   0xE        /* Wait then read 1 or 2 bytes */
++	__be32 fcr;             /**< Flash Command Register */
++#define FCR_CMD0     0xFF000000
++#define FCR_CMD0_SHIFT       24
++#define FCR_CMD1     0x00FF0000
++#define FCR_CMD1_SHIFT       16
++#define FCR_CMD2     0x0000FF00
++#define FCR_CMD2_SHIFT        8
++#define FCR_CMD3     0x000000FF
++#define FCR_CMD3_SHIFT        0
++	__be32 fbar;            /**< Flash Block Address Register */
++#define FBAR_BLK     0x00FFFFFF
++	__be32 fpar;            /**< Flash Page Address Register */
++#define FPAR_SP_PI   0x00007C00
++#define FPAR_SP_PI_SHIFT     10
++#define FPAR_SP_MS   0x00000200
++#define FPAR_SP_CI   0x000001FF
++#define FPAR_SP_CI_SHIFT      0
++#define FPAR_LP_PI   0x0003F000
++#define FPAR_LP_PI_SHIFT     12
++#define FPAR_LP_MS   0x00000800
++#define FPAR_LP_CI   0x000007FF
++#define FPAR_LP_CI_SHIFT      0
++	__be32 fbcr;            /**< Flash Byte Count Register */
++#define FBCR_BC      0x00000FFF
++	u8 res11[0x8];
++	u8 res8[0xF00];
++};
++
++extern struct fsl_lbc_regs __iomem *fsl_lbc_regs;
++extern spinlock_t fsl_lbc_lock;
++
++/*
++ * FSL UPM routines
++ */
++struct fsl_upm {
++	__be32 __iomem *mxmr;
++	int width;
++};
++
++extern int fsl_lbc_find(phys_addr_t addr_base);
++extern int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm);
++
++/**
++ * fsl_upm_start_pattern - start UPM patterns execution
++ * @upm:	pointer to the fsl_upm structure obtained via fsl_upm_find
++ * @pat_offset:	UPM pattern offset for the command to be executed
++ *
++ * This routine programmes UPM so the next memory access that hits an UPM
++ * will trigger pattern execution, starting at pat_offset.
++ */
++static inline void fsl_upm_start_pattern(struct fsl_upm *upm, u8 pat_offset)
++{
++	clrsetbits_be32(upm->mxmr, MxMR_MAD, MxMR_OP_RP | pat_offset);
++}
++
++/**
++ * fsl_upm_end_pattern - end UPM patterns execution
++ * @upm:	pointer to the fsl_upm structure obtained via fsl_upm_find
++ *
++ * This routine reverts UPM to normal operation mode.
++ */
++static inline void fsl_upm_end_pattern(struct fsl_upm *upm)
++{
++	clrbits32(upm->mxmr, MxMR_OP_RP);
++
++	while (in_be32(upm->mxmr) & MxMR_OP_RP)
++		cpu_relax();
++}
++
++/**
++ * fsl_upm_run_pattern - actually run an UPM pattern
++ * @upm:	pointer to the fsl_upm structure obtained via fsl_upm_find
++ * @io_base:	remapped pointer to where memory access should happen
++ * @mar:	MAR register content during pattern execution
++ *
++ * This function triggers dummy write to the memory specified by the io_base,
++ * thus UPM pattern actually executed. Note that mar usage depends on the
++ * pre-programmed AMX bits in the UPM RAM.
++ */
++static inline int fsl_upm_run_pattern(struct fsl_upm *upm,
++				      void __iomem *io_base, u32 mar)
++{
++	int ret = 0;
++	unsigned long flags;
++
++	spin_lock_irqsave(&fsl_lbc_lock, flags);
++
++	out_be32(&fsl_lbc_regs->mar, mar << (32 - upm->width));
++
++	switch (upm->width) {
++	case 8:
++		out_8(io_base, 0x0);
++		break;
++	case 16:
++		out_be16(io_base, 0x0);
++		break;
++	case 32:
++		out_be32(io_base, 0x0);
++		break;
++	default:
++		ret = -EINVAL;
++		break;
++	}
++
++	spin_unlock_irqrestore(&fsl_lbc_lock, flags);
++
++	return ret;
++}
++
++#endif /* __ASM_FSL_LBC_H */
+--- /dev/null
++++ b/include/asm-powerpc/gpio.h
+@@ -0,0 +1,56 @@
++/*
++ * Generic GPIO API implementation for PowerPC.
++ *
++ * Copyright (c) 2007-2008  MontaVista Software, Inc.
++ *
++ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef __ASM_POWERPC_GPIO_H
++#define __ASM_POWERPC_GPIO_H
++
++#include <linux/errno.h>
++#include <asm-generic/gpio.h>
++
++#ifdef CONFIG_HAVE_GPIO_LIB
++
++/*
++ * We don't (yet) implement inlined/rapid versions for on-chip gpios.
++ * Just call gpiolib.
++ */
++static inline int gpio_get_value(unsigned int gpio)
++{
++	return __gpio_get_value(gpio);
++}
++
++static inline void gpio_set_value(unsigned int gpio, int value)
++{
++	__gpio_set_value(gpio, value);
++}
++
++static inline int gpio_cansleep(unsigned int gpio)
++{
++	return __gpio_cansleep(gpio);
++}
++
++/*
++ * Not implemented, yet.
++ */
++static inline int gpio_to_irq(unsigned int gpio)
++{
++	return -ENOSYS;
++}
++
++static inline int irq_to_gpio(unsigned int irq)
++{
++	return -EINVAL;
++}
++
++#endif /* CONFIG_HAVE_GPIO_LIB */
++
++#endif /* __ASM_POWERPC_GPIO_H */
+--- a/include/asm-powerpc/hw_irq.h
++++ b/include/asm-powerpc/hw_irq.h
+@@ -27,7 +27,7 @@ static inline unsigned long local_get_fl
+ 	return flags;
+ }
+ 
+-static inline unsigned long local_irq_disable(void)
++static inline unsigned long raw_local_irq_disable(void)
+ {
+ 	unsigned long flags, zero;
+ 
+@@ -39,14 +39,15 @@ static inline unsigned long local_irq_di
+ 	return flags;
+ }
+ 
+-extern void local_irq_restore(unsigned long);
++extern void raw_local_irq_restore(unsigned long);
+ extern void iseries_handle_interrupts(void);
+ 
+-#define local_irq_enable()	local_irq_restore(1)
+-#define local_save_flags(flags)	((flags) = local_get_flags())
+-#define local_irq_save(flags)	((flags) = local_irq_disable())
++#define raw_local_irq_enable()		raw_local_irq_restore(1)
++#define raw_local_save_flags(flags)	((flags) = local_get_flags())
++#define raw_local_irq_save(flags)	((flags) = raw_local_irq_disable())
+ 
+-#define irqs_disabled()		(local_get_flags() == 0)
++#define raw_irqs_disabled()		(local_get_flags() == 0)
++#define raw_irqs_disabled_flags(flags)	((flags) == 0)
+ 
+ #define __hard_irq_enable()	__mtmsrd(mfmsr() | MSR_EE, 1)
+ #define __hard_irq_disable()	__mtmsrd(mfmsr() & ~MSR_EE, 1)
+--- a/include/asm-powerpc/immap_qe.h
++++ b/include/asm-powerpc/immap_qe.h
+@@ -20,6 +20,7 @@
+ #ifdef __KERNEL__
+ 
+ #include <linux/kernel.h>
++#include <asm/io.h>
+ 
+ #define QE_IMMAP_SIZE	(1024 * 1024)	/* 1MB from 1MB+IMMR */
+ 
+@@ -468,7 +469,7 @@ struct qe_immap {
+ 	u8			res18[0xC0000];	/* 0x140000 - 0x200000 */
+ } __attribute__ ((packed));
+ 
+-extern struct qe_immap *qe_immr;
++extern struct qe_immap __iomem *qe_immr;
+ extern phys_addr_t get_qe_base(void);
+ 
+ static inline unsigned long immrbar_virt_to_phys(void *address)
+--- a/include/asm-powerpc/irqflags.h
++++ b/include/asm-powerpc/irqflags.h
+@@ -2,30 +2,43 @@
+  * include/asm-powerpc/irqflags.h
+  *
+  * IRQ flags handling
+- *
+- * This file gets included from lowlevel asm headers too, to provide
+- * wrapped versions of the local_irq_*() APIs, based on the
+- * raw_local_irq_*() macros from the lowlevel headers.
+  */
+ #ifndef _ASM_IRQFLAGS_H
+ #define _ASM_IRQFLAGS_H
+ 
++#ifndef __ASSEMBLY__
+ /*
+  * Get definitions for raw_local_save_flags(x), etc.
+  */
+ #include <asm-powerpc/hw_irq.h>
+ 
++#else
++#ifdef CONFIG_TRACE_IRQFLAGS
+ /*
+- * Do the CPU's IRQ-state tracing from assembly code. We call a
+- * C function, so save all the C-clobbered registers:
++ * Most of the CPU's IRQ-state tracing is done from assembly code; we
++ * have to call a C function so call a wrapper that saves all the
++ * C-clobbered registers.
+  */
+-#ifdef CONFIG_TRACE_IRQFLAGS
+-
+-#error No support on PowerPC yet for CONFIG_TRACE_IRQFLAGS
+-
++#define TRACE_ENABLE_INTS	bl .trace_hardirqs_on
++#define TRACE_DISABLE_INTS	bl .trace_hardirqs_off
++#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip)	\
++	cmpdi	en, 0;				\
++	bne	95f;				\
++	stb	en,PACASOFTIRQEN(r13);		\
++	bl	.trace_hardirqs_off;		\
++	b	skip;				\
++95:	bl	.trace_hardirqs_on;		\
++	li	en,1;
++#define TRACE_AND_RESTORE_IRQ(en)		\
++	TRACE_AND_RESTORE_IRQ_PARTIAL(en,96f);	\
++96:	stb	en,PACASOFTIRQEN(r13)
+ #else
+-# define TRACE_IRQS_ON
+-# define TRACE_IRQS_OFF
++#define TRACE_ENABLE_INTS
++#define TRACE_DISABLE_INTS
++#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip)
++#define TRACE_AND_RESTORE_IRQ(en)		\
++	stb	en,PACASOFTIRQEN(r13)
++#endif
+ #endif
+ 
+ #endif
+--- /dev/null
++++ b/include/asm-powerpc/iseries/alpaca.h
+@@ -0,0 +1,31 @@
++/*
++ * Copyright © 2008  Stephen Rothwell IBM Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
++ */
++#ifndef _ASM_POWERPC_ISERIES_ALPACA_H
++#define _ASM_POWERPC_ISERIES_ALPACA_H
++
++/*
++ * This is the part of the paca that the iSeries hypervisor
++ * needs to be statically initialised. Immediately after boot
++ * we switch to the normal Linux paca.
++ */
++struct alpaca {
++	struct lppaca *lppaca_ptr;	/* Pointer to LpPaca for PLIC */
++	const void *reg_save_ptr;	/* Pointer to LpRegSave for PLIC */
++};
++
++#endif /* _ASM_POWERPC_ISERIES_ALPACA_H */
+--- a/include/asm-powerpc/iseries/it_lp_reg_save.h
++++ /dev/null
+@@ -1,85 +0,0 @@
+-/*
+- * Copyright (C) 2001  Mike Corrigan IBM Corporation
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License as published by
+- * the Free Software Foundation; either version 2 of the License, or
+- * (at your option) any later version.
+- *
+- * This program is distributed in the hope that it will be useful,
+- * but WITHOUT ANY WARRANTY; without even the implied warranty of
+- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+- * GNU General Public License for more details.
+- *
+- * You should have received a copy of the GNU General Public License
+- * along with this program; if not, write to the Free Software
+- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+- */
+-#ifndef _ASM_POWERPC_ISERIES_IT_LP_REG_SAVE_H
+-#define _ASM_POWERPC_ISERIES_IT_LP_REG_SAVE_H
+-
+-/*
+- * This control block contains the data that is shared between PLIC
+- * and the OS
+- */
+-
+-struct ItLpRegSave {
+-	u32	xDesc;		// Eye catcher  "LpRS" ebcdic	000-003
+-	u16	xSize;		// Size of this class		004-005
+-	u8	xInUse;         // Area is live                 006-007
+-	u8	xRsvd1[9];	// Reserved			007-00F
+-
+-	u8      xFixedRegSave[352]; // Fixed Register Save Area 010-16F
+-	u32	xCTRL;		// Control Register		170-173
+-	u32	xDEC;		// Decrementer			174-177
+-	u32	xFPSCR;		// FP Status and Control Reg	178-17B
+-	u32	xPVR;		// Processor Version Number	17C-17F
+-
+-	u64	xMMCR0;		// Monitor Mode Control Reg 0	180-187
+-	u32	xPMC1;		// Perf Monitor Counter 1	188-18B
+-	u32	xPMC2;		// Perf Monitor Counter 2	18C-18F
+-	u32	xPMC3;		// Perf Monitor Counter 3	190-193
+-	u32	xPMC4;		// Perf Monitor Counter 4	194-197
+-	u32	xPIR;		// Processor ID Reg		198-19B
+-
+-	u32	xMMCR1;		// Monitor Mode Control Reg 1	19C-19F
+-	u32	xMMCRA;		// Monitor Mode Control Reg A	1A0-1A3
+-	u32	xPMC5;		// Perf Monitor Counter 5	1A4-1A7
+-	u32	xPMC6;		// Perf Monitor Counter 6	1A8-1AB
+-	u32	xPMC7;		// Perf Monitor Counter 7	1AC-1AF
+-	u32	xPMC8;		// Perf Monitor Counter 8	1B0-1B3
+-	u32	xTSC;		// Thread Switch Control	1B4-1B7
+-	u32	xTST;		// Thread Switch Timeout	1B8-1BB
+-	u32	xRsvd;          // Reserved                     1BC-1BF
+-
+-	u64	xACCR;		// Address Compare Control Reg	1C0-1C7
+-	u64	xIMR;		// Instruction Match Register	1C8-1CF
+-	u64	xSDR1;		// Storage Description Reg 1	1D0-1D7
+-	u64	xSPRG0;		// Special Purpose Reg General0	1D8-1DF
+-	u64	xSPRG1;		// Special Purpose Reg General1	1E0-1E7
+-	u64	xSPRG2;		// Special Purpose Reg General2	1E8-1EF
+-	u64	xSPRG3;		// Special Purpose Reg General3	1F0-1F7
+-	u64	xTB;		// Time Base Register		1F8-1FF
+-
+-	u64	xFPR[32];	// Floating Point Registers	200-2FF
+-
+-	u64	xMSR;		// Machine State Register	300-307
+-	u64	xNIA;		// Next Instruction Address	308-30F
+-
+-	u64	xDABR;		// Data Address Breakpoint Reg	310-317
+-	u64	xIABR;		// Inst Address Breakpoint Reg	318-31F
+-
+-	u64	xHID0;		// HW Implementation Dependent0	320-327
+-
+-	u64	xHID4;		// HW Implementation Dependent4	328-32F
+-	u64	xSCOMd;		// SCON Data Reg (SPRG4)	330-337
+-	u64	xSCOMc;		// SCON Command Reg (SPRG5)	338-33F
+-	u64	xSDAR;		// Sample Data Address Register	340-347
+-	u64	xSIAR;		// Sample Inst Address Register	348-34F
+-
+-	u8	xRsvd3[176];	// Reserved			350-3FF
+-};
+-
+-extern struct ItLpRegSave iseries_reg_save[];
+-
+-#endif /* _ASM_POWERPC_ISERIES_IT_LP_REG_SAVE_H */
+--- a/include/asm-powerpc/lmb.h
++++ b/include/asm-powerpc/lmb.h
+@@ -1,81 +1,15 @@
+ #ifndef _ASM_POWERPC_LMB_H
+ #define _ASM_POWERPC_LMB_H
+-#ifdef __KERNEL__
+ 
+-/*
+- * Definitions for talking to the Open Firmware PROM on
+- * Power Macintosh computers.
+- *
+- * Copyright (C) 2001 Peter Bergner, IBM Corp.
+- *
+- * This program is free software; you can redistribute it and/or
+- * modify it under the terms of the GNU General Public License
+- * as published by the Free Software Foundation; either version
+- * 2 of the License, or (at your option) any later version.
+- */
++#include <asm/udbg.h>
+ 
+-#include <linux/init.h>
+-#include <asm/prom.h>
++#define LMB_DBG(fmt...) udbg_printf(fmt)
+ 
+-#define MAX_LMB_REGIONS 128
++#ifdef CONFIG_PPC32
++extern phys_addr_t lowmem_end_addr;
++#define LMB_REAL_LIMIT	lowmem_end_addr
++#else
++#define LMB_REAL_LIMIT	0
++#endif
+ 
+-struct lmb_property {
+-	unsigned long base;
+-	unsigned long size;
+-};
+-
+-struct lmb_region {
+-	unsigned long cnt;
+-	unsigned long size;
+-	struct lmb_property region[MAX_LMB_REGIONS+1];
+-};
+-
+-struct lmb {
+-	unsigned long debug;
+-	unsigned long rmo_size;
+-	struct lmb_region memory;
+-	struct lmb_region reserved;
+-};
+-
+-extern struct lmb lmb;
+-
+-extern void __init lmb_init(void);
+-extern void __init lmb_analyze(void);
+-extern long __init lmb_add(unsigned long base, unsigned long size);
+-extern long __init lmb_reserve(unsigned long base, unsigned long size);
+-extern unsigned long __init lmb_alloc(unsigned long size, unsigned long align);
+-extern unsigned long __init lmb_alloc_base(unsigned long size,
+-		unsigned long align, unsigned long max_addr);
+-extern unsigned long __init __lmb_alloc_base(unsigned long size,
+-		unsigned long align, unsigned long max_addr);
+-extern unsigned long __init lmb_phys_mem_size(void);
+-extern unsigned long __init lmb_end_of_DRAM(void);
+-extern void __init lmb_enforce_memory_limit(unsigned long memory_limit);
+-extern int __init lmb_is_reserved(unsigned long addr);
+-
+-extern void lmb_dump_all(void);
+-
+-static inline unsigned long
+-lmb_size_bytes(struct lmb_region *type, unsigned long region_nr)
+-{
+-	return type->region[region_nr].size;
+-}
+-static inline unsigned long
+-lmb_size_pages(struct lmb_region *type, unsigned long region_nr)
+-{
+-	return lmb_size_bytes(type, region_nr) >> PAGE_SHIFT;
+-}
+-static inline unsigned long
+-lmb_start_pfn(struct lmb_region *type, unsigned long region_nr)
+-{
+-	return type->region[region_nr].base >> PAGE_SHIFT;
+-}
+-static inline unsigned long
+-lmb_end_pfn(struct lmb_region *type, unsigned long region_nr)
+-{
+-	return lmb_start_pfn(type, region_nr) +
+-	       lmb_size_pages(type, region_nr);
+-}
+-
+-#endif /* __KERNEL__ */
+ #endif /* _ASM_POWERPC_LMB_H */
+--- a/include/asm-powerpc/machdep.h
++++ b/include/asm-powerpc/machdep.h
+@@ -68,6 +68,8 @@ struct machdep_calls {
+ 				       unsigned long vflags,
+ 				       int psize, int ssize);
+ 	long		(*hpte_remove)(unsigned long hpte_group);
++	void            (*hpte_removebolted)(unsigned long ea,
++					     int psize, int ssize);
+ 	void		(*flush_hash_range)(unsigned long number, int local);
+ 
+ 	/* special for kexec, to be called in real mode, linar mapping is
+@@ -196,9 +198,6 @@ struct machdep_calls {
+ 	   May be NULL. */
+ 	void		(*init)(void);
+ 
+-	void		(*setup_io_mappings)(void);
+-
+-	void		(*early_serial_map)(void);
+ 	void		(*kgdb_map_scc)(void);
+ 
+ 	/*
+--- a/include/asm-powerpc/macio.h
++++ b/include/asm-powerpc/macio.h
+@@ -2,7 +2,7 @@
+ #define __MACIO_ASIC_H__
+ #ifdef __KERNEL__
+ 
+-#include <asm/of_device.h>
++#include <linux/of_device.h>
+ 
+ extern struct bus_type macio_bus_type;
+ 
+--- a/include/asm-powerpc/mmu-40x.h
++++ b/include/asm-powerpc/mmu-40x.h
+@@ -53,8 +53,6 @@
+ 
+ #ifndef __ASSEMBLY__
+ 
+-typedef unsigned long phys_addr_t;
+-
+ typedef struct {
+ 	unsigned long id;
+ 	unsigned long vdso_base;
+--- a/include/asm-powerpc/mmu-44x.h
++++ b/include/asm-powerpc/mmu-44x.h
+@@ -53,8 +53,6 @@
+ 
+ #ifndef __ASSEMBLY__
+ 
+-typedef unsigned long long phys_addr_t;
+-
+ typedef struct {
+ 	unsigned long id;
+ 	unsigned long vdso_base;
+--- a/include/asm-powerpc/mmu-8xx.h
++++ b/include/asm-powerpc/mmu-8xx.h
+@@ -136,8 +136,6 @@
+ #define SPRN_M_TW	799
+ 
+ #ifndef __ASSEMBLY__
+-typedef unsigned long phys_addr_t;
+-
+ typedef struct {
+ 	unsigned long id;
+ 	unsigned long vdso_base;
+--- a/include/asm-powerpc/mmu-fsl-booke.h
++++ b/include/asm-powerpc/mmu-fsl-booke.h
+@@ -73,12 +73,6 @@
+ 
+ #ifndef __ASSEMBLY__
+ 
+-#ifndef CONFIG_PHYS_64BIT
+-typedef unsigned long phys_addr_t;
+-#else
+-typedef unsigned long long phys_addr_t;
+-#endif
+-
+ typedef struct {
+ 	unsigned long id;
+ 	unsigned long vdso_base;
+--- a/include/asm-powerpc/mmu-hash32.h
++++ b/include/asm-powerpc/mmu-hash32.h
+@@ -84,8 +84,6 @@ typedef struct {
+ 	unsigned long vdso_base;
+ } mm_context_t;
+ 
+-typedef unsigned long phys_addr_t;
+-
+ #endif /* !__ASSEMBLY__ */
+ 
+ #endif /* _ASM_POWERPC_MMU_HASH32_H_ */
+--- a/include/asm-powerpc/mmu-hash64.h
++++ b/include/asm-powerpc/mmu-hash64.h
+@@ -469,9 +469,6 @@ static inline unsigned long get_vsid(uns
+ 				 VSID_MODULUS_256M)
+ #define KERNEL_VSID(ea)		VSID_SCRAMBLE(GET_ESID(ea))
+ 
+-/* Physical address used by some IO functions */
+-typedef unsigned long phys_addr_t;
+-
+ #endif /* __ASSEMBLY__ */
+ 
+ #endif /* _ASM_POWERPC_MMU_HASH64_H_ */
+--- a/include/asm-powerpc/paca.h
++++ b/include/asm-powerpc/paca.h
+@@ -42,10 +42,7 @@ struct task_struct;
+  * Defines the layout of the paca.
+  *
+  * This structure is not directly accessed by firmware or the service
+- * processor except for the first two pointers that point to the
+- * lppaca area and the ItLpRegSave area for this CPU.  The lppaca
+- * object is currently contained within the PACA but it doesn't need
+- * to be.
++ * processor.
+  */
+ struct paca_struct {
+ 	/*
+@@ -55,14 +52,7 @@ struct paca_struct {
+ 	 * avoid cacheline bouncing.
+ 	 */
+ 
+-	/*
+-	 * MAGIC: These first two pointers can't be moved - they're
+-	 * accessed by the firmware
+-	 */
+ 	struct lppaca *lppaca_ptr;	/* Pointer to LpPaca for PLIC */
+-#ifdef CONFIG_PPC_ISERIES
+-	void *reg_save_ptr; /* Pointer to LpRegSave for PLIC */
+-#endif /* CONFIG_PPC_ISERIES */
+ 
+ 	/*
+ 	 * MAGIC: the spinlock functions in arch/powerpc/lib/locks.c 
+--- a/include/asm-powerpc/page.h
++++ b/include/asm-powerpc/page.h
+@@ -53,6 +53,7 @@
+ 
+ #define PAGE_OFFSET     ASM_CONST(CONFIG_KERNEL_START)
+ #define KERNELBASE      (PAGE_OFFSET + PHYSICAL_START)
++#define LOAD_OFFSET	PAGE_OFFSET
+ 
+ #ifdef CONFIG_FLATMEM
+ #define pfn_valid(pfn)		((pfn) < max_mapnr)
+--- a/include/asm-powerpc/page_32.h
++++ b/include/asm-powerpc/page_32.h
+@@ -3,8 +3,6 @@
+ 
+ #define VM_DATA_DEFAULT_FLAGS	VM_DATA_DEFAULT_FLAGS32
+ 
+-#define PPC_MEMSTART	0
+-
+ #ifdef CONFIG_NOT_COHERENT_CACHE
+ #define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
+ #endif
+--- a/include/asm-powerpc/pasemi_dma.h
++++ b/include/asm-powerpc/pasemi_dma.h
+@@ -1,5 +1,5 @@
+ /*
+- * Copyright (C) 2006 PA Semi, Inc
++ * Copyright (C) 2006-2008 PA Semi, Inc
+  *
+  * Hardware register layout and descriptor formats for the on-board
+  * DMA engine on PA Semi PWRficient. Used by ethernet, function and security
+@@ -40,6 +40,11 @@ enum {
+ 	PAS_DMA_COM_TXSTA = 0x104,	/* Transmit Status Register   */
+ 	PAS_DMA_COM_RXCMD = 0x108,	/* Receive Command Register   */
+ 	PAS_DMA_COM_RXSTA = 0x10c,	/* Receive Status Register    */
++	PAS_DMA_COM_CFG   = 0x114,	/* Common config reg	      */
++	PAS_DMA_TXF_SFLG0 = 0x140,	/* Set flags                  */
++	PAS_DMA_TXF_SFLG1 = 0x144,	/* Set flags                  */
++	PAS_DMA_TXF_CFLG0 = 0x148,	/* Set flags                  */
++	PAS_DMA_TXF_CFLG1 = 0x14c,	/* Set flags                  */
+ };
+ 
+ 
+@@ -123,11 +128,16 @@ enum {
+ #define    PAS_DMA_TXCHAN_TCMDSTA_DA	0x00000100
+ #define PAS_DMA_TXCHAN_CFG(c)     (0x304+(c)*_PAS_DMA_TXCHAN_STRIDE)
+ #define    PAS_DMA_TXCHAN_CFG_TY_IFACE	0x00000000	/* Type = interface */
++#define    PAS_DMA_TXCHAN_CFG_TY_COPY	0x00000001	/* Type = copy only */
++#define    PAS_DMA_TXCHAN_CFG_TY_FUNC	0x00000002	/* Type = function */
++#define    PAS_DMA_TXCHAN_CFG_TY_XOR	0x00000003	/* Type = xor only */
+ #define    PAS_DMA_TXCHAN_CFG_TATTR_M	0x0000003c
+ #define    PAS_DMA_TXCHAN_CFG_TATTR_S	2
+ #define    PAS_DMA_TXCHAN_CFG_TATTR(x)	(((x) << PAS_DMA_TXCHAN_CFG_TATTR_S) & \
+ 					 PAS_DMA_TXCHAN_CFG_TATTR_M)
+-#define    PAS_DMA_TXCHAN_CFG_WT_M	0x000001c0
++#define    PAS_DMA_TXCHAN_CFG_LPDQ	0x00000800
++#define    PAS_DMA_TXCHAN_CFG_LPSQ	0x00000400
++#define    PAS_DMA_TXCHAN_CFG_WT_M	0x000003c0
+ #define    PAS_DMA_TXCHAN_CFG_WT_S	6
+ #define    PAS_DMA_TXCHAN_CFG_WT(x)	(((x) << PAS_DMA_TXCHAN_CFG_WT_S) & \
+ 					 PAS_DMA_TXCHAN_CFG_WT_M)
+@@ -394,11 +404,62 @@ enum {
+ 				 XCT_COPY_LLEN_M)
+ #define XCT_COPY_SE		0x0000000000000001ull
+ 
++/* Function descriptor fields */
++#define XCT_FUN_T		0x8000000000000000ull
++#define XCT_FUN_ST		0x4000000000000000ull
++#define XCT_FUN_RR_M		0x3000000000000000ull
++#define XCT_FUN_RR_NORES	0x0000000000000000ull
++#define XCT_FUN_RR_8BRES	0x1000000000000000ull
++#define XCT_FUN_RR_24BRES	0x2000000000000000ull
++#define XCT_FUN_RR_40BRES	0x3000000000000000ull
++#define XCT_FUN_I		0x0800000000000000ull
++#define XCT_FUN_O		0x0400000000000000ull
++#define XCT_FUN_E		0x0200000000000000ull
++#define XCT_FUN_FUN_M		0x01c0000000000000ull
++#define XCT_FUN_FUN_S		54
++#define XCT_FUN_FUN(x)		((((long)(x)) << XCT_FUN_FUN_S) & XCT_FUN_FUN_M)
++#define XCT_FUN_CRM_M		0x0038000000000000ull
++#define XCT_FUN_CRM_NOP		0x0000000000000000ull
++#define XCT_FUN_CRM_SIG		0x0008000000000000ull
++#define XCT_FUN_LLEN_M		0x0007ffff00000000ull
++#define XCT_FUN_LLEN_S		32
++#define XCT_FUN_LLEN(x)		((((long)(x)) << XCT_FUN_LLEN_S) & XCT_FUN_LLEN_M)
++#define XCT_FUN_SHL_M		0x00000000f8000000ull
++#define XCT_FUN_SHL_S		27
++#define XCT_FUN_SHL(x)		((((long)(x)) << XCT_FUN_SHL_S) & XCT_FUN_SHL_M)
++#define XCT_FUN_CHL_M		0x0000000007c00000ull
++#define XCT_FUN_HSZ_M		0x00000000003c0000ull
++#define XCT_FUN_ALG_M		0x0000000000038000ull
++#define XCT_FUN_HP		0x0000000000004000ull
++#define XCT_FUN_BCM_M		0x0000000000003800ull
++#define XCT_FUN_BCP_M		0x0000000000000600ull
++#define XCT_FUN_SIG_M		0x00000000000001f0ull
++#define XCT_FUN_SIG_TCP4	0x0000000000000140ull
++#define XCT_FUN_SIG_TCP6	0x0000000000000150ull
++#define XCT_FUN_SIG_UDP4	0x0000000000000160ull
++#define XCT_FUN_SIG_UDP6	0x0000000000000170ull
++#define XCT_FUN_A		0x0000000000000008ull
++#define XCT_FUN_C		0x0000000000000004ull
++#define XCT_FUN_AL2		0x0000000000000002ull
++#define XCT_FUN_SE		0x0000000000000001ull
++
++/* Function descriptor 8byte result fields */
++#define XCT_FUNRES_8B_CS_M	0x0000ffff00000000ull
++#define XCT_FUNRES_8B_CS_S	32
++#define XCT_FUNRES_8B_CRC_M	0x00000000ffffffffull
++#define XCT_FUNRES_8B_CRC_S	0
++
+ /* Control descriptor fields */
+ #define CTRL_CMD_T		0x8000000000000000ull
+ #define CTRL_CMD_META_EVT	0x2000000000000000ull
+ #define CTRL_CMD_O		0x0400000000000000ull
+-#define CTRL_CMD_REG_M		0x000000000000000full
++#define CTRL_CMD_ETYPE_M	0x0038000000000000ull
++#define CTRL_CMD_ETYPE_EXT	0x0000000000000000ull
++#define CTRL_CMD_ETYPE_WSET	0x0020000000000000ull
++#define CTRL_CMD_ETYPE_WCLR	0x0028000000000000ull
++#define CTRL_CMD_ETYPE_SET	0x0030000000000000ull
++#define CTRL_CMD_ETYPE_CLR	0x0038000000000000ull
++#define CTRL_CMD_REG_M		0x000000000000007full
+ #define CTRL_CMD_REG_S		0
+ #define CTRL_CMD_REG(x)		((((long)(x)) << CTRL_CMD_REG_S) & \
+ 				 CTRL_CMD_REG_M)
+@@ -461,6 +522,16 @@ extern void *pasemi_dma_alloc_buf(struct
+ extern void pasemi_dma_free_buf(struct pasemi_dmachan *chan, int size,
+ 				dma_addr_t *handle);
+ 
++/* Routines to allocate flags (events) for channel syncronization */
++extern int  pasemi_dma_alloc_flag(void);
++extern void pasemi_dma_free_flag(int flag);
++extern void pasemi_dma_set_flag(int flag);
++extern void pasemi_dma_clear_flag(int flag);
++
++/* Routines to allocate function engines */
++extern int  pasemi_dma_alloc_fun(void);
++extern void pasemi_dma_free_fun(int fun);
++
+ /* Initialize the library, must be called before any other functions */
+ extern int pasemi_dma_init(void);
+ 
+--- a/include/asm-powerpc/pci-bridge.h
++++ b/include/asm-powerpc/pci-bridge.h
+@@ -117,7 +117,7 @@ struct pci_controller {
+ 
+ #ifndef CONFIG_PPC64
+ 
+-static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus)
++static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
+ {
+ 	return bus->sysdata;
+ }
+@@ -235,7 +235,7 @@ extern void pcibios_fixup_new_pci_device
+ 
+ extern int pcibios_remove_root_bus(struct pci_controller *phb);
+ 
+-static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus)
++static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
+ {
+ 	struct device_node *busdn = bus->sysdata;
+ 
+--- a/include/asm-powerpc/pgtable-ppc32.h
++++ b/include/asm-powerpc/pgtable-ppc32.h
+@@ -98,9 +98,6 @@ extern int icache_44x_need_flush;
+ #define USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
+ #define FIRST_USER_ADDRESS	0
+ 
+-#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT)
+-#define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS)
+-
+ #define pte_ERROR(e) \
+ 	printk("%s:%d: bad pte %llx.\n", __FILE__, __LINE__, \
+ 		(unsigned long long)pte_val(e))
+@@ -420,7 +417,8 @@ extern int icache_44x_need_flush;
+ #define _PAGE_IO	(_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED)
+ #define _PAGE_RAM	(_PAGE_KERNEL | _PAGE_HWEXEC)
+ 
+-#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH)
++#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) ||\
++	defined(CONFIG_KPROBES)
+ /* We want the debuggers to be able to set breakpoints anywhere, so
+  * don't write protect the kernel text */
+ #define _PAGE_RAM_TEXT	_PAGE_RAM
+@@ -692,7 +690,7 @@ extern pgprot_t phys_mem_access_prot(str
+ #define pmd_page_vaddr(pmd)	\
+ 	((unsigned long) (pmd_val(pmd) & PAGE_MASK))
+ #define pmd_page(pmd)		\
+-	(mem_map + (__pa(pmd_val(pmd)) >> PAGE_SHIFT))
++	pfn_to_page((__pa(pmd_val(pmd)) >> PAGE_SHIFT))
+ #endif
+ 
+ /* to find an entry in a kernel page-table-directory */
+--- /dev/null
++++ b/include/asm-powerpc/phyp_dump.h
+@@ -0,0 +1,47 @@
++/*
++ * Hypervisor-assisted dump
++ *
++ * Linas Vepstas, Manish Ahuja 2008
++ * Copyright 2008 IBM Corp.
++ *
++ *      This program is free software; you can redistribute it and/or
++ *      modify it under the terms of the GNU General Public License
++ *      as published by the Free Software Foundation; either version
++ *      2 of the License, or (at your option) any later version.
++ */
++
++#ifndef _PPC64_PHYP_DUMP_H
++#define _PPC64_PHYP_DUMP_H
++
++#ifdef CONFIG_PHYP_DUMP
++
++/* The RMR region will be saved for later dumping
++ * whenever the kernel crashes. Set this to 256MB. */
++#define PHYP_DUMP_RMR_START 0x0
++#define PHYP_DUMP_RMR_END   (1UL<<28)
++
++struct phyp_dump {
++	/* Memory that is reserved during very early boot. */
++	unsigned long init_reserve_start;
++	unsigned long init_reserve_size;
++	/* cmd line options during boot */
++	unsigned long reserve_bootvar;
++	unsigned long phyp_dump_at_boot;
++	/* Check status during boot if dump supported, active & present*/
++	unsigned long phyp_dump_configured;
++	unsigned long phyp_dump_is_active;
++	/* store cpu & hpte size */
++	unsigned long cpu_state_size;
++	unsigned long hpte_region_size;
++	/* previous scratch area values */
++	unsigned long reserved_scratch_addr;
++	unsigned long reserved_scratch_size;
++};
++
++extern struct phyp_dump *phyp_dump_info;
++
++int early_init_dt_scan_phyp_dump(unsigned long node,
++		const char *uname, int depth, void *data);
++
++#endif /* CONFIG_PHYP_DUMP */
++#endif /* _PPC64_PHYP_DUMP_H */
+--- a/include/asm-powerpc/pmi.h
++++ b/include/asm-powerpc/pmi.h
+@@ -29,8 +29,6 @@
+ 
+ #ifdef __KERNEL__
+ 
+-#include <asm/of_device.h>
+-
+ #define PMI_TYPE_FREQ_CHANGE	0x01
+ #define PMI_READ_TYPE		0
+ #define PMI_READ_DATA0		1
+--- /dev/null
++++ b/include/asm-powerpc/ppc4xx.h
+@@ -0,0 +1,18 @@
++/*
++ * PPC4xx Prototypes and definitions
++ *
++ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
++ *
++ * This is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ */
++
++#ifndef __ASM_POWERPC_PPC4xx_H__
++#define __ASM_POWERPC_PPC4xx_H__
++
++extern void ppc4xx_reset_system(char *cmd);
++
++#endif /* __ASM_POWERPC_PPC4xx_H__ */
+--- a/include/asm-powerpc/ps3.h
++++ b/include/asm-powerpc/ps3.h
+@@ -434,8 +434,11 @@ struct ps3_sys_manager_ops {
+ };
+ 
+ void ps3_sys_manager_register_ops(const struct ps3_sys_manager_ops *ops);
+-void ps3_sys_manager_power_off(void);
+-void ps3_sys_manager_restart(void);
++void __noreturn ps3_sys_manager_power_off(void);
++void __noreturn ps3_sys_manager_restart(void);
++void __noreturn ps3_sys_manager_halt(void);
++int ps3_sys_manager_get_wol(void);
++void ps3_sys_manager_set_wol(int state);
+ 
+ struct ps3_prealloc {
+     const char *name;
+--- a/include/asm-powerpc/ptrace.h
++++ b/include/asm-powerpc/ptrace.h
+@@ -58,6 +58,11 @@ struct pt_regs {
+ #define __ARCH_WANT_COMPAT_SYS_PTRACE
+ 
+ #define STACK_FRAME_OVERHEAD	112	/* size of minimum stack frame */
++#define STACK_FRAME_LR_SAVE	2	/* Location of LR in stack frame */
++#define STACK_FRAME_REGS_MARKER	ASM_CONST(0x7265677368657265)
++#define STACK_INT_FRAME_SIZE	(sizeof(struct pt_regs) + \
++					STACK_FRAME_OVERHEAD + 288)
++#define STACK_FRAME_MARKER	12
+ 
+ /* Size of dummy stack frame allocated when calling signal handler. */
+ #define __SIGNAL_FRAMESIZE	128
+@@ -66,6 +71,10 @@ struct pt_regs {
+ #else /* __powerpc64__ */
+ 
+ #define STACK_FRAME_OVERHEAD	16	/* size of minimum stack frame */
++#define STACK_FRAME_LR_SAVE	1	/* Location of LR in stack frame */
++#define STACK_FRAME_REGS_MARKER	ASM_CONST(0x72656773)
++#define STACK_INT_FRAME_SIZE	(sizeof(struct pt_regs) + STACK_FRAME_OVERHEAD)
++#define STACK_FRAME_MARKER	2
+ 
+ /* Size of stack frame allocated when calling signal handler. */
+ #define __SIGNAL_FRAMESIZE	64
+--- a/include/asm-powerpc/qe.h
++++ b/include/asm-powerpc/qe.h
+@@ -85,6 +85,7 @@ extern int par_io_data_set(u8 port, u8 p
+ /* QE internal API */
+ int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
+ enum qe_clock qe_clock_source(const char *source);
++unsigned int qe_get_brg_clk(void);
+ int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier);
+ int qe_get_snum(void);
+ void qe_put_snum(u8 snum);
+@@ -92,7 +93,16 @@ unsigned long qe_muram_alloc(int size, i
+ int qe_muram_free(unsigned long offset);
+ unsigned long qe_muram_alloc_fixed(unsigned long offset, int size);
+ void qe_muram_dump(void);
+-void *qe_muram_addr(unsigned long offset);
++
++static inline void __iomem *qe_muram_addr(unsigned long offset)
++{
++	return (void __iomem *)&qe_immr->muram[offset];
++}
++
++static inline unsigned long qe_muram_offset(void __iomem *addr)
++{
++	return addr - (void __iomem *)qe_immr->muram;
++}
+ 
+ /* Structure that defines QE firmware binary files.
+  *
+--- a/include/asm-powerpc/rwsem.h
++++ b/include/asm-powerpc/rwsem.h
+@@ -32,11 +32,20 @@ struct rw_semaphore {
+ #define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+ 	spinlock_t		wait_lock;
+ 	struct list_head	wait_list;
++#ifdef CONFIG_DEBUG_LOCK_ALLOC
++	struct lockdep_map	dep_map;
++#endif
+ };
+ 
++#ifdef CONFIG_DEBUG_LOCK_ALLOC
++# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname }
++#else
++# define __RWSEM_DEP_MAP_INIT(lockname)
++#endif
++
+ #define __RWSEM_INITIALIZER(name) \
+-	{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \
+-	  LIST_HEAD_INIT((name).wait_list) }
++	{ RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \
++	  LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) }
+ 
+ #define DECLARE_RWSEM(name)		\
+ 	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+@@ -46,12 +55,15 @@ extern struct rw_semaphore *rwsem_down_w
+ extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem);
+ extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
+ 
+-static inline void init_rwsem(struct rw_semaphore *sem)
+-{
+-	sem->count = RWSEM_UNLOCKED_VALUE;
+-	spin_lock_init(&sem->wait_lock);
+-	INIT_LIST_HEAD(&sem->wait_list);
+-}
++extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
++			 struct lock_class_key *key);
++
++#define init_rwsem(sem)					\
++	do {						\
++		static struct lock_class_key __key;	\
++							\
++		__init_rwsem((sem), #sem, &__key);	\
++	} while (0)
+ 
+ /*
+  * lock for reading
+@@ -78,7 +90,7 @@ static inline int __down_read_trylock(st
+ /*
+  * lock for writing
+  */
+-static inline void __down_write(struct rw_semaphore *sem)
++static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
+ {
+ 	int tmp;
+ 
+@@ -88,6 +100,11 @@ static inline void __down_write(struct r
+ 		rwsem_down_write_failed(sem);
+ }
+ 
++static inline void __down_write(struct rw_semaphore *sem)
++{
++	__down_write_nested(sem, 0);
++}
++
+ static inline int __down_write_trylock(struct rw_semaphore *sem)
+ {
+ 	int tmp;
+--- a/include/asm-powerpc/sparsemem.h
++++ b/include/asm-powerpc/sparsemem.h
+@@ -15,6 +15,7 @@
+ 
+ #ifdef CONFIG_MEMORY_HOTPLUG
+ extern void create_section_mapping(unsigned long start, unsigned long end);
++extern int remove_section_mapping(unsigned long start, unsigned long end);
+ #ifdef CONFIG_NUMA
+ extern int hot_add_scn_to_nid(unsigned long scn_addr);
+ #else
+--- a/include/asm-powerpc/spinlock.h
++++ b/include/asm-powerpc/spinlock.h
+@@ -19,6 +19,7 @@
+  *
+  * (the type definitions are in asm/spinlock_types.h)
+  */
++#include <linux/irqflags.h>
+ #ifdef CONFIG_PPC64
+ #include <asm/paca.h>
+ #include <asm/hvcall.h>
+--- a/include/asm-powerpc/string.h
++++ b/include/asm-powerpc/string.h
+@@ -7,6 +7,7 @@
+ #define __HAVE_ARCH_STRNCPY
+ #define __HAVE_ARCH_STRLEN
+ #define __HAVE_ARCH_STRCMP
++#define __HAVE_ARCH_STRNCMP
+ #define __HAVE_ARCH_STRCAT
+ #define __HAVE_ARCH_MEMSET
+ #define __HAVE_ARCH_MEMCPY
+@@ -18,6 +19,7 @@ extern char * strcpy(char *,const char *
+ extern char * strncpy(char *,const char *, __kernel_size_t);
+ extern __kernel_size_t strlen(const char *);
+ extern int strcmp(const char *,const char *);
++extern int strncmp(const char *, const char *, __kernel_size_t);
+ extern char * strcat(char *, const char *);
+ extern void * memset(void *,int,__kernel_size_t);
+ extern void * memcpy(void *,const void *,__kernel_size_t);
+--- a/include/asm-powerpc/types.h
++++ b/include/asm-powerpc/types.h
+@@ -84,6 +84,13 @@ typedef unsigned long long u64;
+ 
+ typedef __vector128 vector128;
+ 
++/* Physical address used by some IO functions */
++#if defined(CONFIG_PPC64) || defined(CONFIG_PHYS_64BIT)
++typedef u64 phys_addr_t;
++#else
++typedef u32 phys_addr_t;
++#endif
++
+ #ifdef __powerpc64__
+ typedef u64 dma_addr_t;
+ #else
+--- /dev/null
++++ b/include/asm-sparc64/lmb.h
+@@ -0,0 +1,10 @@
++#ifndef _SPARC64_LMB_H
++#define _SPARC64_LMB_H
++
++#include <asm/oplib.h>
++
++#define LMB_DBG(fmt...) prom_printf(fmt)
++
++#define LMB_REAL_LIMIT	0
++
++#endif /* !(_SPARC64_LMB_H) */
+--- /dev/null
++++ b/include/linux/lmb.h
+@@ -0,0 +1,85 @@
++#ifndef _LINUX_LMB_H
++#define _LINUX_LMB_H
++#ifdef __KERNEL__
++
++/*
++ * Logical memory blocks.
++ *
++ * Copyright (C) 2001 Peter Bergner, IBM Corp.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#include <linux/init.h>
++#include <linux/mm.h>
++
++#define MAX_LMB_REGIONS 128
++
++struct lmb_property {
++	u64 base;
++	u64 size;
++};
++
++struct lmb_region {
++	unsigned long cnt;
++	u64 size;
++	struct lmb_property region[MAX_LMB_REGIONS+1];
++};
++
++struct lmb {
++	unsigned long debug;
++	u64 rmo_size;
++	struct lmb_region memory;
++	struct lmb_region reserved;
++};
++
++extern struct lmb lmb;
++
++extern void __init lmb_init(void);
++extern void __init lmb_analyze(void);
++extern long __init lmb_add(u64 base, u64 size);
++extern long __init lmb_reserve(u64 base, u64 size);
++extern u64 __init lmb_alloc_nid(u64 size, u64 align, int nid,
++				u64 (*nid_range)(u64, u64, int *));
++extern u64 __init lmb_alloc(u64 size, u64 align);
++extern u64 __init lmb_alloc_base(u64 size,
++		u64, u64 max_addr);
++extern u64 __init __lmb_alloc_base(u64 size,
++		u64 align, u64 max_addr);
++extern u64 __init lmb_phys_mem_size(void);
++extern u64 __init lmb_end_of_DRAM(void);
++extern void __init lmb_enforce_memory_limit(u64 memory_limit);
++extern int __init lmb_is_reserved(u64 addr);
++
++extern void lmb_dump_all(void);
++
++static inline u64
++lmb_size_bytes(struct lmb_region *type, unsigned long region_nr)
++{
++	return type->region[region_nr].size;
++}
++static inline u64
++lmb_size_pages(struct lmb_region *type, unsigned long region_nr)
++{
++	return lmb_size_bytes(type, region_nr) >> PAGE_SHIFT;
++}
++static inline u64
++lmb_start_pfn(struct lmb_region *type, unsigned long region_nr)
++{
++	return type->region[region_nr].base >> PAGE_SHIFT;
++}
++static inline u64
++lmb_end_pfn(struct lmb_region *type, unsigned long region_nr)
++{
++	return lmb_start_pfn(type, region_nr) +
++	       lmb_size_pages(type, region_nr);
++}
++
++#include <asm/lmb.h>
++
++#endif /* __KERNEL__ */
++
++#endif /* _LINUX_LMB_H */
+--- a/include/linux/of.h
++++ b/include/linux/of.h
+@@ -62,6 +62,7 @@ extern struct property *of_find_property
+ 					 int *lenp);
+ extern int of_device_is_compatible(const struct device_node *device,
+ 				   const char *);
++extern int of_device_is_available(const struct device_node *device);
+ extern const void *of_get_property(const struct device_node *node,
+ 				const char *name,
+ 				int *lenp);
+--- /dev/null
++++ b/include/linux/of_gpio.h
+@@ -0,0 +1,69 @@
++/*
++ * OF helpers for the GPIO API
++ *
++ * Copyright (c) 2007-2008  MontaVista Software, Inc.
++ *
++ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef __LINUX_OF_GPIO_H
++#define __LINUX_OF_GPIO_H
++
++#include <linux/errno.h>
++#include <asm/gpio.h>
++
++#ifdef CONFIG_OF_GPIO
++
++/*
++ * Generic OF GPIO chip
++ */
++struct of_gpio_chip {
++	struct gpio_chip gc;
++	int gpio_cells;
++	int (*xlate)(struct of_gpio_chip *of_gc, struct device_node *np,
++		     const void *gpio_spec);
++};
++
++static inline struct of_gpio_chip *to_of_gpio_chip(struct gpio_chip *gc)
++{
++	return container_of(gc, struct of_gpio_chip, gc);
++}
++
++/*
++ * OF GPIO chip for memory mapped banks
++ */
++struct of_mm_gpio_chip {
++	struct of_gpio_chip of_gc;
++	void (*save_regs)(struct of_mm_gpio_chip *mm_gc);
++	void __iomem *regs;
++};
++
++static inline struct of_mm_gpio_chip *to_of_mm_gpio_chip(struct gpio_chip *gc)
++{
++	struct of_gpio_chip *of_gc = to_of_gpio_chip(gc);
++
++	return container_of(of_gc, struct of_mm_gpio_chip, of_gc);
++}
++
++extern int of_get_gpio(struct device_node *np, int index);
++extern int of_mm_gpiochip_add(struct device_node *np,
++			      struct of_mm_gpio_chip *mm_gc);
++extern int of_gpio_simple_xlate(struct of_gpio_chip *of_gc,
++				struct device_node *np,
++				const void *gpio_spec);
++#else
++
++/* Drivers may not strictly depend on the GPIO support, so let them link. */
++static inline int of_get_gpio(struct device_node *np, int index)
++{
++	return -ENOSYS;
++}
++
++#endif /* CONFIG_OF_GPIO */
++
++#endif /* __LINUX_OF_GPIO_H */
+--- /dev/null
++++ b/include/linux/of_i2c.h
+@@ -0,0 +1,24 @@
++/*
++ * Generic I2C API implementation for PowerPC.
++ *
++ * Copyright (c) 2008 Jochen Friedrich <jochen@scram.de>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef __LINUX_OF_I2C_H
++#define __LINUX_OF_I2C_H
++
++#include <linux/i2c.h>
++
++#ifdef CONFIG_OF_I2C
++
++void of_register_i2c_devices(struct i2c_adapter *adap,
++			     struct device_node *adap_node);
++
++#endif /* CONFIG_OF_I2C */
++
++#endif /* __LINUX_OF_I2C_H */
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -141,4 +141,7 @@ config HAS_DMA
+ config CHECK_SIGNATURE
+ 	bool
+ 
++config HAVE_LMB
++	boolean
++
+ endmenu
+--- a/lib/Makefile
++++ b/lib/Makefile
+@@ -70,6 +70,8 @@ obj-$(CONFIG_FAULT_INJECTION) += fault-i
+ 
+ lib-$(CONFIG_GENERIC_BUG) += bug.o
+ 
++obj-$(CONFIG_HAVE_LMB) += lmb.o
++
+ hostprogs-y	:= gen_crc32table
+ clean-files	:= crc32table.h
+ 
+--- /dev/null
++++ b/lib/lmb.c
+@@ -0,0 +1,428 @@
++/*
++ * Procedures for maintaining information about logical memory blocks.
++ *
++ * Peter Bergner, IBM Corp.	June 2001.
++ * Copyright (C) 2001 Peter Bergner.
++ *
++ *      This program is free software; you can redistribute it and/or
++ *      modify it under the terms of the GNU General Public License
++ *      as published by the Free Software Foundation; either version
++ *      2 of the License, or (at your option) any later version.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/bitops.h>
++#include <linux/lmb.h>
++
++#define LMB_ALLOC_ANYWHERE	0
++
++struct lmb lmb;
++
++void lmb_dump_all(void)
++{
++#ifdef DEBUG
++	unsigned long i;
++
++	pr_debug("lmb_dump_all:\n");
++	pr_debug("    memory.cnt		  = 0x%lx\n", lmb.memory.cnt);
++	pr_debug("    memory.size		  = 0x%llx\n",
++	    (unsigned long long)lmb.memory.size);
++	for (i=0; i < lmb.memory.cnt ;i++) {
++		pr_debug("    memory.region[0x%x].base       = 0x%llx\n",
++		    i, (unsigned long long)lmb.memory.region[i].base);
++		pr_debug("		      .size     = 0x%llx\n",
++		    (unsigned long long)lmb.memory.region[i].size);
++	}
++
++	pr_debug("    reserved.cnt	  = 0x%lx\n", lmb.reserved.cnt);
++	pr_debug("    reserved.size	  = 0x%lx\n", lmb.reserved.size);
++	for (i=0; i < lmb.reserved.cnt ;i++) {
++		pr_debug("    reserved.region[0x%x].base       = 0x%llx\n",
++		    i, (unsigned long long)lmb.reserved.region[i].base);
++		pr_debug("		      .size     = 0x%llx\n",
++		    (unsigned long long)lmb.reserved.region[i].size);
++	}
++#endif /* DEBUG */
++}
++
++static unsigned long __init lmb_addrs_overlap(u64 base1, u64 size1,
++		u64 base2, u64 size2)
++{
++	return ((base1 < (base2 + size2)) && (base2 < (base1 + size1)));
++}
++
++static long __init lmb_addrs_adjacent(u64 base1, u64 size1,
++		u64 base2, u64 size2)
++{
++	if (base2 == base1 + size1)
++		return 1;
++	else if (base1 == base2 + size2)
++		return -1;
++
++	return 0;
++}
++
++static long __init lmb_regions_adjacent(struct lmb_region *rgn,
++		unsigned long r1, unsigned long r2)
++{
++	u64 base1 = rgn->region[r1].base;
++	u64 size1 = rgn->region[r1].size;
++	u64 base2 = rgn->region[r2].base;
++	u64 size2 = rgn->region[r2].size;
++
++	return lmb_addrs_adjacent(base1, size1, base2, size2);
++}
++
++static void __init lmb_remove_region(struct lmb_region *rgn, unsigned long r)
++{
++	unsigned long i;
++
++	for (i = r; i < rgn->cnt - 1; i++) {
++		rgn->region[i].base = rgn->region[i + 1].base;
++		rgn->region[i].size = rgn->region[i + 1].size;
++	}
++	rgn->cnt--;
++}
++
++/* Assumption: base addr of region 1 < base addr of region 2 */
++static void __init lmb_coalesce_regions(struct lmb_region *rgn,
++		unsigned long r1, unsigned long r2)
++{
++	rgn->region[r1].size += rgn->region[r2].size;
++	lmb_remove_region(rgn, r2);
++}
++
++void __init lmb_init(void)
++{
++	/* Create a dummy zero size LMB which will get coalesced away later.
++	 * This simplifies the lmb_add() code below...
++	 */
++	lmb.memory.region[0].base = 0;
++	lmb.memory.region[0].size = 0;
++	lmb.memory.cnt = 1;
++
++	/* Ditto. */
++	lmb.reserved.region[0].base = 0;
++	lmb.reserved.region[0].size = 0;
++	lmb.reserved.cnt = 1;
++}
++
++void __init lmb_analyze(void)
++{
++	int i;
++
++	lmb.memory.size = 0;
++
++	for (i = 0; i < lmb.memory.cnt; i++)
++		lmb.memory.size += lmb.memory.region[i].size;
++}
++
++static long __init lmb_add_region(struct lmb_region *rgn, u64 base, u64 size)
++{
++	unsigned long coalesced = 0;
++	long adjacent, i;
++
++	if ((rgn->cnt == 1) && (rgn->region[0].size == 0)) {
++		rgn->region[0].base = base;
++		rgn->region[0].size = size;
++		return 0;
++	}
++
++	/* First try and coalesce this LMB with another. */
++	for (i = 0; i < rgn->cnt; i++) {
++		u64 rgnbase = rgn->region[i].base;
++		u64 rgnsize = rgn->region[i].size;
++
++		if ((rgnbase == base) && (rgnsize == size))
++			/* Already have this region, so we're done */
++			return 0;
++
++		adjacent = lmb_addrs_adjacent(base, size, rgnbase, rgnsize);
++		if (adjacent > 0) {
++			rgn->region[i].base -= size;
++			rgn->region[i].size += size;
++			coalesced++;
++			break;
++		} else if (adjacent < 0) {
++			rgn->region[i].size += size;
++			coalesced++;
++			break;
++		}
++	}
++
++	if ((i < rgn->cnt - 1) && lmb_regions_adjacent(rgn, i, i+1)) {
++		lmb_coalesce_regions(rgn, i, i+1);
++		coalesced++;
++	}
++
++	if (coalesced)
++		return coalesced;
++	if (rgn->cnt >= MAX_LMB_REGIONS)
++		return -1;
++
++	/* Couldn't coalesce the LMB, so add it to the sorted table. */
++	for (i = rgn->cnt - 1; i >= 0; i--) {
++		if (base < rgn->region[i].base) {
++			rgn->region[i+1].base = rgn->region[i].base;
++			rgn->region[i+1].size = rgn->region[i].size;
++		} else {
++			rgn->region[i+1].base = base;
++			rgn->region[i+1].size = size;
++			break;
++		}
++	}
++
++	if (base < rgn->region[0].base) {
++		rgn->region[0].base = base;
++		rgn->region[0].size = size;
++	}
++	rgn->cnt++;
++
++	return 0;
++}
++
++long __init lmb_add(u64 base, u64 size)
++{
++	struct lmb_region *_rgn = &lmb.memory;
++
++	/* On pSeries LPAR systems, the first LMB is our RMO region. */
++	if (base == 0)
++		lmb.rmo_size = size;
++
++	return lmb_add_region(_rgn, base, size);
++
++}
++
++long __init lmb_reserve(u64 base, u64 size)
++{
++	struct lmb_region *_rgn = &lmb.reserved;
++
++	BUG_ON(0 == size);
++
++	return lmb_add_region(_rgn, base, size);
++}
++
++long __init lmb_overlaps_region(struct lmb_region *rgn, u64 base, u64 size)
++{
++	unsigned long i;
++
++	for (i = 0; i < rgn->cnt; i++) {
++		u64 rgnbase = rgn->region[i].base;
++		u64 rgnsize = rgn->region[i].size;
++		if (lmb_addrs_overlap(base, size, rgnbase, rgnsize))
++			break;
++	}
++
++	return (i < rgn->cnt) ? i : -1;
++}
++
++static u64 lmb_align_down(u64 addr, u64 size)
++{
++	return addr & ~(size - 1);
++}
++
++static u64 lmb_align_up(u64 addr, u64 size)
++{
++	return (addr + (size - 1)) & ~(size - 1);
++}
++
++static u64 __init lmb_alloc_nid_unreserved(u64 start, u64 end,
++					   u64 size, u64 align)
++{
++	u64 base, res_base;
++	long j;
++
++	base = lmb_align_down((end - size), align);
++	while (start <= base) {
++		j = lmb_overlaps_region(&lmb.reserved, base, size);
++		if (j < 0) {
++			/* this area isn't reserved, take it */
++			if (lmb_add_region(&lmb.reserved, base,
++					   lmb_align_up(size, align)) < 0)
++				base = ~(u64)0;
++			return base;
++		}
++		res_base = lmb.reserved.region[j].base;
++		if (res_base < size)
++			break;
++		base = lmb_align_down(res_base - size, align);
++	}
++
++	return ~(u64)0;
++}
++
++static u64 __init lmb_alloc_nid_region(struct lmb_property *mp,
++				       u64 (*nid_range)(u64, u64, int *),
++				       u64 size, u64 align, int nid)
++{
++	u64 start, end;
++
++	start = mp->base;
++	end = start + mp->size;
++
++	start = lmb_align_up(start, align);
++	while (start < end) {
++		u64 this_end;
++		int this_nid;
++
++		this_end = nid_range(start, end, &this_nid);
++		if (this_nid == nid) {
++			u64 ret = lmb_alloc_nid_unreserved(start, this_end,
++							   size, align);
++			if (ret != ~(u64)0)
++				return ret;
++		}
++		start = this_end;
++	}
++
++	return ~(u64)0;
++}
++
++u64 __init lmb_alloc_nid(u64 size, u64 align, int nid,
++			 u64 (*nid_range)(u64 start, u64 end, int *nid))
++{
++	struct lmb_region *mem = &lmb.memory;
++	int i;
++
++	for (i = 0; i < mem->cnt; i++) {
++		u64 ret = lmb_alloc_nid_region(&mem->region[i],
++					       nid_range,
++					       size, align, nid);
++		if (ret != ~(u64)0)
++			return ret;
++	}
++
++	return lmb_alloc(size, align);
++}
++
++u64 __init lmb_alloc(u64 size, u64 align)
++{
++	return lmb_alloc_base(size, align, LMB_ALLOC_ANYWHERE);
++}
++
++u64 __init lmb_alloc_base(u64 size, u64 align, u64 max_addr)
++{
++	u64 alloc;
++
++	alloc = __lmb_alloc_base(size, align, max_addr);
++
++	if (alloc == 0)
++		panic("ERROR: Failed to allocate 0x%llx bytes below 0x%llx.\n",
++		      (unsigned long long) size, (unsigned long long) max_addr);
++
++	return alloc;
++}
++
++u64 __init __lmb_alloc_base(u64 size, u64 align, u64 max_addr)
++{
++	long i, j;
++	u64 base = 0;
++	u64 res_base;
++
++	BUG_ON(0 == size);
++
++	/* On some platforms, make sure we allocate lowmem */
++	/* Note that LMB_REAL_LIMIT may be LMB_ALLOC_ANYWHERE */
++	if (max_addr == LMB_ALLOC_ANYWHERE)
++		max_addr = LMB_REAL_LIMIT;
++
++	for (i = lmb.memory.cnt - 1; i >= 0; i--) {
++		u64 lmbbase = lmb.memory.region[i].base;
++		u64 lmbsize = lmb.memory.region[i].size;
++
++		if (lmbsize < size)
++			continue;
++		if (max_addr == LMB_ALLOC_ANYWHERE)
++			base = lmb_align_down(lmbbase + lmbsize - size, align);
++		else if (lmbbase < max_addr) {
++			base = min(lmbbase + lmbsize, max_addr);
++			base = lmb_align_down(base - size, align);
++		} else
++			continue;
++
++		while (base && lmbbase <= base) {
++			j = lmb_overlaps_region(&lmb.reserved, base, size);
++			if (j < 0) {
++				/* this area isn't reserved, take it */
++				if (lmb_add_region(&lmb.reserved, base,
++						   size) < 0)
++					return 0;
++				return base;
++			}
++			res_base = lmb.reserved.region[j].base;
++			if (res_base < size)
++				break;
++			base = lmb_align_down(res_base - size, align);
++		}
++	}
++	return 0;
++}
++
++/* You must call lmb_analyze() before this. */
++u64 __init lmb_phys_mem_size(void)
++{
++	return lmb.memory.size;
++}
++
++u64 __init lmb_end_of_DRAM(void)
++{
++	int idx = lmb.memory.cnt - 1;
++
++	return (lmb.memory.region[idx].base + lmb.memory.region[idx].size);
++}
++
++/* You must call lmb_analyze() after this. */
++void __init lmb_enforce_memory_limit(u64 memory_limit)
++{
++	unsigned long i;
++	u64 limit;
++	struct lmb_property *p;
++
++	if (!memory_limit)
++		return;
++
++	/* Truncate the lmb regions to satisfy the memory limit. */
++	limit = memory_limit;
++	for (i = 0; i < lmb.memory.cnt; i++) {
++		if (limit > lmb.memory.region[i].size) {
++			limit -= lmb.memory.region[i].size;
++			continue;
++		}
++
++		lmb.memory.region[i].size = limit;
++		lmb.memory.cnt = i + 1;
++		break;
++	}
++
++	if (lmb.memory.region[0].size < lmb.rmo_size)
++		lmb.rmo_size = lmb.memory.region[0].size;
++
++	/* And truncate any reserves above the limit also. */
++	for (i = 0; i < lmb.reserved.cnt; i++) {
++		p = &lmb.reserved.region[i];
++
++		if (p->base > memory_limit)
++			p->size = 0;
++		else if ((p->base + p->size) > memory_limit)
++			p->size = memory_limit - p->base;
++
++		if (p->size == 0) {
++			lmb_remove_region(&lmb.reserved, i);
++			i--;
++		}
++	}
++}
++
++int __init lmb_is_reserved(u64 addr)
++{
++	int i;
++
++	for (i = 0; i < lmb.reserved.cnt; i++) {
++		u64 upper = lmb.reserved.region[i].base +
++			lmb.reserved.region[i].size - 1;
++		if ((addr >= lmb.reserved.region[i].base) && (addr <= upper))
++			return 1;
++	}
++	return 0;
++}
diff --git a/target/linux/generic/patches-2.6.25/801-usb_serial_endpoint_size.patch b/target/linux/generic/patches-2.6.25/801-usb_serial_endpoint_size.patch
new file mode 100644
index 0000000000..395495ab1c
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/801-usb_serial_endpoint_size.patch
@@ -0,0 +1,25 @@
+--- a/drivers/usb/serial/usb-serial.c
++++ b/drivers/usb/serial/usb-serial.c
+@@ -58,6 +58,7 @@ static struct usb_driver usb_serial_driv
+    drivers depend on it.
+ */
+ 
++static ushort maxSize = 0;
+ static int debug;
+ static struct usb_serial *serial_table[SERIAL_TTY_MINORS];	/* initially all NULL */
+ static DEFINE_MUTEX(table_lock);
+@@ -903,7 +904,7 @@ int usb_serial_probe(struct usb_interfac
+ 			dev_err(&interface->dev, "No free urbs available\n");
+ 			goto probe_error;
+ 		}
+-		buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
++		buffer_size = (endpoint->wMaxPacketSize > maxSize) ? endpoint->wMaxPacketSize : maxSize;
+ 		port->bulk_in_size = buffer_size;
+ 		port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
+ 		port->bulk_in_buffer = kmalloc (buffer_size, GFP_KERNEL);
+@@ -1315,3 +1316,5 @@ MODULE_LICENSE("GPL");
+ 
+ module_param(debug, bool, S_IRUGO | S_IWUSR);
+ MODULE_PARM_DESC(debug, "Debug enabled or not");
++module_param(maxSize, ushort,0);
++MODULE_PARM_DESC(maxSize,"User specified USB endpoint size");
diff --git a/target/linux/generic/patches-2.6.25/840-unable_to_open_console.patch b/target/linux/generic/patches-2.6.25/840-unable_to_open_console.patch
new file mode 100644
index 0000000000..d1d162b02a
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/840-unable_to_open_console.patch
@@ -0,0 +1,11 @@
+--- a/init/main.c
++++ b/init/main.c
+@@ -775,7 +775,7 @@ static int noinline init_post(void)
+ 	numa_default_policy();
+ 
+ 	if (sys_open((const char __user *) "/dev/console", O_RDWR, 0) < 0)
+-		printk(KERN_WARNING "Warning: unable to open an initial console.\n");
++		printk(KERN_WARNING "Please be patient, while OpenWrt loads ...\n");
+ 
+ 	(void) sys_dup(0);
+ 	(void) sys_dup(0);
diff --git a/target/linux/generic/patches-2.6.25/850-jffs2_erase_progress_indicator.patch b/target/linux/generic/patches-2.6.25/850-jffs2_erase_progress_indicator.patch
new file mode 100644
index 0000000000..20bf1efabc
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/850-jffs2_erase_progress_indicator.patch
@@ -0,0 +1,23 @@
+--- a/fs/jffs2/erase.c
++++ b/fs/jffs2/erase.c
+@@ -35,6 +35,8 @@ static void jffs2_erase_block(struct jff
+ {
+ 	int ret;
+ 	uint32_t bad_offset;
++	static char s[]="|/-\\", *p=s;
++
+ #ifdef __ECOS
+        ret = jffs2_flash_erase(c, jeb);
+        if (!ret) {
+@@ -47,6 +49,11 @@ static void jffs2_erase_block(struct jff
+ 
+ 	D1(printk(KERN_DEBUG "jffs2_erase_block(): erase block %#08x (range %#08x-%#08x)\n",
+ 				jeb->offset, jeb->offset, jeb->offset + c->sector_size));
++
++	printk("%c\b", *p);
++	if (*++p==0)
++	p=s;
++
+ 	instr = kmalloc(sizeof(struct erase_info) + sizeof(struct erase_priv_struct), GFP_KERNEL);
+ 	if (!instr) {
+ 		printk(KERN_WARNING "kmalloc for struct erase_info in jffs2_erase_block failed. Refiling block for later\n");
diff --git a/target/linux/generic/patches-2.6.25/900-headers_type_and_time.patch b/target/linux/generic/patches-2.6.25/900-headers_type_and_time.patch
new file mode 100644
index 0000000000..cd5d6864fa
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/900-headers_type_and_time.patch
@@ -0,0 +1,46 @@
+--- a/include/linux/time.h
++++ b/include/linux/time.h
+@@ -1,6 +1,10 @@
+ #ifndef _LINUX_TIME_H
+ #define _LINUX_TIME_H
+ 
++#ifndef __KERNEL__
++#include <time.h>
++#else
++
+ #include <linux/types.h>
+ 
+ #ifdef __KERNEL__
+@@ -232,4 +236,6 @@ struct itimerval {
+  */
+ #define TIMER_ABSTIME			0x01
+ 
++#endif /* __KERNEL__ DEBIAN */
++
+ #endif
+--- a/include/linux/types.h
++++ b/include/linux/types.h
+@@ -1,6 +1,14 @@
+ #ifndef _LINUX_TYPES_H
+ #define _LINUX_TYPES_H
+ 
++/* Debian: Use userland types instead.  */
++#ifndef __KERNEL__
++# include <sys/types.h>
++/* For other kernel headers.  */
++# include <linux/posix_types.h>
++# include <asm/types.h>
++#else
++
+ #ifdef	__KERNEL__
+ 
+ #define DECLARE_BITMAP(name,bits) \
+@@ -161,6 +169,8 @@ typedef unsigned long blkcnt_t;
+ 
+ #endif /* __KERNEL_STRICT_NAMES */
+ 
++#endif /* __KERNEL__ DEBIAN */
++
+ /*
+  * Below are truly Linux-specific types that should never collide with
+  * any application/library that wants linux/types.h.
diff --git a/target/linux/generic/patches-2.6.25/902-darwin_scripts_include.patch b/target/linux/generic/patches-2.6.25/902-darwin_scripts_include.patch
new file mode 100644
index 0000000000..88c0421f03
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/902-darwin_scripts_include.patch
@@ -0,0 +1,102 @@
+--- a/scripts/genksyms/parse.c_shipped
++++ b/scripts/genksyms/parse.c_shipped
+@@ -160,7 +160,9 @@
+ 
+ 
+ #include <assert.h>
++#ifndef __APPLE__
+ #include <malloc.h>
++#endif
+ #include "genksyms.h"
+ 
+ static int is_typedef;
+--- a/scripts/genksyms/parse.y
++++ b/scripts/genksyms/parse.y
+@@ -24,7 +24,9 @@
+ %{
+ 
+ #include <assert.h>
++#ifndef __APPLE__
+ #include <malloc.h>
++#endif
+ #include "genksyms.h"
+ 
+ static int is_typedef;
+--- a/scripts/kallsyms.c
++++ b/scripts/kallsyms.c
+@@ -28,6 +28,35 @@
+ #include <stdlib.h>
+ #include <string.h>
+ #include <ctype.h>
++#ifdef __APPLE__
++/* Darwin has no memmem implementation, this one is ripped of the uClibc-0.9.28 source */
++void *memmem (const void *haystack, size_t haystack_len,
++                          const void *needle,  size_t needle_len)
++{
++  const char *begin;
++  const char *const last_possible
++    = (const char *) haystack + haystack_len - needle_len;
++
++  if (needle_len == 0)
++    /* The first occurrence of the empty string is deemed to occur at
++       the beginning of the string.  */
++    return (void *) haystack;
++
++  /* Sanity check, otherwise the loop might search through the whole
++     memory.  */
++  if (__builtin_expect (haystack_len < needle_len, 0))
++    return NULL;
++
++  for (begin = (const char *) haystack; begin <= last_possible; ++begin)
++    if (begin[0] == ((const char *) needle)[0] &&
++        !memcmp ((const void *) &begin[1],
++                 (const void *) ((const char *) needle + 1),
++                 needle_len - 1))
++      return (void *) begin;
++
++  return NULL;
++}
++#endif
+ 
+ #define KSYM_NAME_LEN		128
+ 
+--- a/scripts/kconfig/Makefile
++++ b/scripts/kconfig/Makefile
+@@ -93,6 +93,9 @@ check-lxdialog  := $(srctree)/$(src)/lxd
+ # we really need to do so. (Do not call gcc as part of make mrproper)
+ HOST_EXTRACFLAGS = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags)
+ HOST_LOADLIBES   = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
++ifeq ($(shell uname -s),Darwin)
++HOST_LOADLIBES  += -lncurses
++endif
+ 
+ HOST_EXTRACFLAGS += -DLOCALE
+ 
+--- a/scripts/mod/mk_elfconfig.c
++++ b/scripts/mod/mk_elfconfig.c
+@@ -1,7 +1,11 @@
+ #include <stdio.h>
+ #include <stdlib.h>
+ #include <string.h>
++#ifndef __APPLE__
+ #include <elf.h>
++#else
++#include "../../../../../tools/sstrip/include/elf.h"
++#endif
+ 
+ int
+ main(int argc, char **argv)
+--- a/scripts/mod/modpost.h
++++ b/scripts/mod/modpost.h
+@@ -7,7 +7,11 @@
+ #include <sys/mman.h>
+ #include <fcntl.h>
+ #include <unistd.h>
++#if !(defined(__APPLE__) || defined(__CYGWIN__))
+ #include <elf.h>
++#else
++#include "../../../../../tools/sstrip/include/elf.h"
++#endif
+ 
+ #include "elfconfig.h"
+ 
diff --git a/target/linux/generic/patches-2.6.25/903-hostap_txpower.patch b/target/linux/generic/patches-2.6.25/903-hostap_txpower.patch
new file mode 100644
index 0000000000..c0bbf2c6ef
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/903-hostap_txpower.patch
@@ -0,0 +1,154 @@
+--- a/drivers/net/wireless/hostap/hostap_ap.c
++++ b/drivers/net/wireless/hostap/hostap_ap.c
+@@ -2397,13 +2397,13 @@ int prism2_ap_get_sta_qual(local_info_t 
+ 		addr[count].sa_family = ARPHRD_ETHER;
+ 		memcpy(addr[count].sa_data, sta->addr, ETH_ALEN);
+ 		if (sta->last_rx_silence == 0)
+-			qual[count].qual = sta->last_rx_signal < 27 ?
+-				0 : (sta->last_rx_signal - 27) * 92 / 127;
++                        qual[count].qual = (sta->last_rx_signal - 156) == 0 ?
++                                0 : (sta->last_rx_signal - 156) * 92 / 64;
+ 		else
+-			qual[count].qual = sta->last_rx_signal -
+-				sta->last_rx_silence - 35;
+-		qual[count].level = HFA384X_LEVEL_TO_dBm(sta->last_rx_signal);
+-		qual[count].noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence);
++                        qual[count].qual = (sta->last_rx_signal -
++                                sta->last_rx_silence) * 92 / 64;
++                qual[count].level = sta->last_rx_signal;
++                qual[count].noise = sta->last_rx_silence;
+ 		qual[count].updated = sta->last_rx_updated;
+ 
+ 		sta->last_rx_updated = IW_QUAL_DBM;
+@@ -2468,13 +2468,13 @@ int prism2_ap_translate_scan(struct net_
+ 		memset(&iwe, 0, sizeof(iwe));
+ 		iwe.cmd = IWEVQUAL;
+ 		if (sta->last_rx_silence == 0)
+-			iwe.u.qual.qual = sta->last_rx_signal < 27 ?
+-				0 : (sta->last_rx_signal - 27) * 92 / 127;
++	                iwe.u.qual.qual = (sta->last_rx_signal -156) == 0 ?
++	                        0 : (sta->last_rx_signal - 156) * 92 / 64;
+ 		else
+-			iwe.u.qual.qual = sta->last_rx_signal -
+-				sta->last_rx_silence - 35;
+-		iwe.u.qual.level = HFA384X_LEVEL_TO_dBm(sta->last_rx_signal);
+-		iwe.u.qual.noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence);
++                        iwe.u.qual.qual = (sta->last_rx_signal -
++                                sta->last_rx_silence) * 92 / 64;
++                iwe.u.qual.level = sta->last_rx_signal;
++                iwe.u.qual.noise = sta->last_rx_silence;
+ 		iwe.u.qual.updated = sta->last_rx_updated;
+ 		iwe.len = IW_EV_QUAL_LEN;
+ 		current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
+--- a/drivers/net/wireless/hostap/hostap_config.h
++++ b/drivers/net/wireless/hostap/hostap_config.h
+@@ -45,4 +45,9 @@
+  */
+ /* #define PRISM2_NO_STATION_MODES */
+ 
++/* Enable TX power Setting functions
++ * (min att = -128 , max att =  127)
++ */
++#define RAW_TXPOWER_SETTING
++
+ #endif /* HOSTAP_CONFIG_H */
+--- a/drivers/net/wireless/hostap/hostap.h
++++ b/drivers/net/wireless/hostap/hostap.h
+@@ -89,6 +89,7 @@ extern const struct iw_handler_def hosta
+ extern const struct ethtool_ops prism2_ethtool_ops;
+ 
+ int hostap_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
++int hostap_restore_power(struct net_device *dev);
+ 
+ 
+ #endif /* HOSTAP_H */
+--- a/drivers/net/wireless/hostap/hostap_hw.c
++++ b/drivers/net/wireless/hostap/hostap_hw.c
+@@ -933,6 +933,7 @@ static int hfa384x_set_rid(struct net_de
+ 			prism2_hw_reset(dev);
+ 	}
+ 
++	hostap_restore_power(dev);
+ 	return res;
+ }
+ 
+--- a/drivers/net/wireless/hostap/hostap_info.c
++++ b/drivers/net/wireless/hostap/hostap_info.c
+@@ -434,6 +434,11 @@ static void handle_info_queue_linkstatus
+ 	}
+ 
+ 	/* Get BSSID if we have a valid AP address */
++
++	if ( val == HFA384X_LINKSTATUS_CONNECTED ||
++	     val == HFA384X_LINKSTATUS_DISCONNECTED ) 
++			hostap_restore_power(local->dev);
++
+ 	if (connected) {
+ 		netif_carrier_on(local->dev);
+ 		netif_carrier_on(local->ddev);
+--- a/drivers/net/wireless/hostap/hostap_ioctl.c
++++ b/drivers/net/wireless/hostap/hostap_ioctl.c
+@@ -1500,23 +1500,20 @@ static int prism2_txpower_hfa386x_to_dBm
+ 		val = 255;
+ 
+ 	tmp = val;
+-	tmp >>= 2;
+ 
+-	return -12 - tmp;
++	return tmp;
+ }
+ 
+ static u16 prism2_txpower_dBm_to_hfa386x(int val)
+ {
+ 	signed char tmp;
+ 
+-	if (val > 20)
+-		return 128;
+-	else if (val < -43)
++	if (val > 127)
+ 		return 127;
++	else if (val < -128)
++		return 128;
+ 
+ 	tmp = val;
+-	tmp = -12 - tmp;
+-	tmp <<= 2;
+ 
+ 	return (unsigned char) tmp;
+ }
+@@ -4076,3 +4073,35 @@ int hostap_ioctl(struct net_device *dev,
+ 
+ 	return ret;
+ }
++
++/* BUG FIX: Restore power setting value when lost due to F/W bug */
++
++int hostap_restore_power(struct net_device *dev)
++{
++        struct hostap_interface *iface = dev->priv;
++       local_info_t *local = iface->local;
++               
++       u16 val;
++       int ret = 0;
++
++       if (local->txpower_type == PRISM2_TXPOWER_OFF) {
++                       val = 0xff; /* use all standby and sleep modes */
++                       ret = local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF,
++                                              HFA386X_CR_A_D_TEST_MODES2,
++                                              &val, NULL);
++       }
++
++#ifdef RAW_TXPOWER_SETTING
++       if (local->txpower_type == PRISM2_TXPOWER_FIXED) {
++               val = HFA384X_TEST_CFG_BIT_ALC;
++               local->func->cmd(dev, HFA384X_CMDCODE_TEST |
++                                (HFA384X_TEST_CFG_BITS << 8), 0, &val, NULL);
++               val = prism2_txpower_dBm_to_hfa386x(local->txpower);
++               ret = (local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF,
++                            HFA386X_CR_MANUAL_TX_POWER, &val, NULL));
++       }
++#endif /* RAW_TXPOWER_SETTING */
++       return (ret ? -EOPNOTSUPP : 0);
++}
++
++EXPORT_SYMBOL(hostap_restore_power);
diff --git a/target/linux/generic/patches-2.6.25/903-stddef_include.patch b/target/linux/generic/patches-2.6.25/903-stddef_include.patch
new file mode 100644
index 0000000000..7fe248d8d3
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/903-stddef_include.patch
@@ -0,0 +1,17 @@
+--- a/include/linux/stddef.h
++++ b/include/linux/stddef.h
+@@ -16,6 +16,7 @@ enum {
+ 	false	= 0,
+ 	true	= 1
+ };
++#endif /* __KERNEL__ */
+ 
+ #undef offsetof
+ #ifdef __compiler_offsetof
+@@ -23,6 +24,5 @@ enum {
+ #else
+ #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
+ #endif
+-#endif /* __KERNEL__ */
+ 
+ #endif
diff --git a/target/linux/generic/patches-2.6.25/904-ls_time_locale.patch b/target/linux/generic/patches-2.6.25/904-ls_time_locale.patch
new file mode 100644
index 0000000000..8fc9381a69
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/904-ls_time_locale.patch
@@ -0,0 +1,20 @@
+--- a/scripts/gen_initramfs_list.sh
++++ b/scripts/gen_initramfs_list.sh
+@@ -125,7 +125,7 @@ parse() {
+ 			str="${ftype} ${name} ${location} ${str}"
+ 			;;
+ 		"nod")
+-			local dev=`LC_ALL=C ls -l "${location}"`
++			local dev=`LC_ALL=C ls -l --time-style=locale "${location}"`
+ 			local maj=`field 5 ${dev}`
+ 			local min=`field 6 ${dev}`
+ 			maj=${maj%,}
+@@ -135,7 +135,7 @@ parse() {
+ 			str="${ftype} ${name} ${str} ${dev} ${maj} ${min}"
+ 			;;
+ 		"slink")
+-			local target=`field 11 $(LC_ALL=C ls -l "${location}")`
++			local target=`field 11 $(LC_ALL=C ls -l --time-style=locale "${location}")`
+ 			str="${ftype} ${name} ${target} ${str}"
+ 			;;
+ 		*)
diff --git a/target/linux/generic/patches-2.6.25/905-i386_build.patch b/target/linux/generic/patches-2.6.25/905-i386_build.patch
new file mode 100644
index 0000000000..c701fdaa95
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/905-i386_build.patch
@@ -0,0 +1,10 @@
+--- a/arch/x86/boot/tools/build.c
++++ b/arch/x86/boot/tools/build.c
+@@ -29,7 +29,6 @@
+ #include <stdarg.h>
+ #include <sys/types.h>
+ #include <sys/stat.h>
+-#include <sys/sysmacros.h>
+ #include <unistd.h>
+ #include <fcntl.h>
+ #include <sys/mman.h>
diff --git a/target/linux/generic/patches-2.6.25/906-msdosfs_header.patch b/target/linux/generic/patches-2.6.25/906-msdosfs_header.patch
new file mode 100644
index 0000000000..128e0db949
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/906-msdosfs_header.patch
@@ -0,0 +1,16 @@
+--- a/include/linux/msdos_fs.h
++++ b/include/linux/msdos_fs.h
+@@ -57,11 +57,13 @@
+ #define MSDOS_DOT	".          "	/* ".", padded to MSDOS_NAME chars */
+ #define MSDOS_DOTDOT	"..         "	/* "..", padded to MSDOS_NAME chars */
+ 
++#ifdef __KERNEL__
+ /* media of boot sector */
+ static inline int fat_valid_media(u8 media)
+ {
+ 	return 0xf8 <= media || media == 0xf0;
+ }
++#endif
+ 
+ #define FAT_FIRST_ENT(s, x)	((MSDOS_SB(s)->fat_bits == 32 ? 0x0FFFFF00 : \
+ 	MSDOS_SB(s)->fat_bits == 16 ? 0xFF00 : 0xF00) | (x))
diff --git a/target/linux/generic/patches-2.6.25/910-m25p80_redboot_partitions.patch b/target/linux/generic/patches-2.6.25/910-m25p80_redboot_partitions.patch
new file mode 100644
index 0000000000..29725148b0
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/910-m25p80_redboot_partitions.patch
@@ -0,0 +1,16 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -627,12 +627,10 @@ static int __devinit m25p_probe(struct s
+ 		struct mtd_partition	*parts = NULL;
+ 		int			nr_parts = 0;
+ 
+-#ifdef CONFIG_MTD_CMDLINE_PARTS
+-		static const char *part_probes[] = { "cmdlinepart", NULL, };
++		static const char *part_probes[] = { "RedBoot", "cmdlinepart", NULL, };
+ 
+ 		nr_parts = parse_mtd_partitions(&flash->mtd,
+ 				part_probes, &parts, 0);
+-#endif
+ 
+ 		if (nr_parts <= 0 && data && data->parts) {
+ 			parts = data->parts;
diff --git a/target/linux/generic/patches-2.6.25/921-gpio_spi_driver.patch b/target/linux/generic/patches-2.6.25/921-gpio_spi_driver.patch
new file mode 100644
index 0000000000..a80482842d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/921-gpio_spi_driver.patch
@@ -0,0 +1,359 @@
+--- /dev/null
++++ b/include/linux/spi/spi_gpio.h
+@@ -0,0 +1,72 @@
++/*
++ * spi_gpio interface to platform code
++ *
++ * Copyright (c) 2008 Piotr Skamruk
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef _LINUX_SPI_SPI_GPIO
++#define _LINUX_SPI_SPI_GPIO
++
++#include <linux/types.h>
++#include <linux/spi/spi.h>
++
++
++/**
++ * struct spi_gpio_platform_data - Data definitions for a SPI-GPIO device.
++ *
++ * This structure holds information about a GPIO-based SPI device.
++ *
++ * @pin_clk: The GPIO pin number of the CLOCK pin.
++ *
++ * @pin_miso: The GPIO pin number of the MISO pin.
++ *
++ * @pin_mosi: The GPIO pin number of the MOSI pin.
++ *
++ * @pin_cs: The GPIO pin number of the CHIPSELECT pin.
++ *
++ * @cs_activelow: If true, the chip is selected when the CS line is low.
++ *
++ * @no_spi_delay: If true, no delay is done in the lowlevel bitbanging.
++ *                Note that doing no delay is not standards compliant,
++ *                but it might be needed to speed up transfers on some
++ *                slow embedded machines.
++ *
++ * @boardinfo_setup: This callback is called after the
++ *                   SPI master device was registered, but before the
++ *                   device is registered.
++ * @boardinfo_setup_data: Data argument passed to boardinfo_setup().
++ */
++struct spi_gpio_platform_data {
++	unsigned int pin_clk;
++	unsigned int pin_miso;
++	unsigned int pin_mosi;
++	unsigned int pin_cs;
++	bool cs_activelow;
++	bool no_spi_delay;
++	int (*boardinfo_setup)(struct spi_board_info *bi,
++			       struct spi_master *master,
++			       void *data);
++	void *boardinfo_setup_data;
++};
++
++/**
++ * SPI_GPIO_PLATDEV_NAME - The platform device name string.
++ *
++ * The name string that has to be used for platform_device_alloc
++ * when allocating a spi-gpio device.
++ */
++#define SPI_GPIO_PLATDEV_NAME	"spi-gpio"
++
++/**
++ * spi_gpio_next_id - Get another platform device ID number.
++ *
++ * This returns the next platform device ID number that has to be used
++ * for platform_device_alloc. The ID is opaque and should not be used for
++ * anything else.
++ */
++int spi_gpio_next_id(void);
++
++#endif /* _LINUX_SPI_SPI_GPIO */
+--- /dev/null
++++ b/drivers/spi/spi_gpio.c
+@@ -0,0 +1,249 @@
++/*
++ * Bitbanging SPI bus driver using GPIO API
++ *
++ * Copyright (c) 2008 Piotr Skamruk
++ *
++ * based on spi_s3c2410_gpio.c
++ *   Copyright (c) 2006 Ben Dooks
++ *   Copyright (c) 2006 Simtec Electronics
++ * and on i2c-gpio.c
++ *   Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/spinlock.h>
++#include <linux/workqueue.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_bitbang.h>
++#include <linux/spi/spi_gpio.h>
++#include <linux/gpio.h>
++#include <asm/atomic.h>
++
++
++struct spi_gpio {
++	struct spi_bitbang bitbang;
++	struct spi_gpio_platform_data *info;
++	struct platform_device *pdev;
++	struct spi_board_info bi;
++};
++
++
++static inline struct spi_gpio *spidev_to_sg(struct spi_device *dev)
++{
++	return dev->controller_data;
++}
++
++static inline void setsck(struct spi_device *dev, int val)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++	gpio_set_value(sp->info->pin_clk, val ? 1 : 0);
++}
++
++static inline void setmosi(struct spi_device *dev, int val)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++	gpio_set_value(sp->info->pin_mosi, val ? 1 : 0);
++}
++
++static inline u32 getmiso(struct spi_device *dev)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++	return gpio_get_value(sp->info->pin_miso) ? 1 : 0;
++}
++
++static inline void do_spidelay(struct spi_device *dev, unsigned nsecs)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++
++	if (!sp->info->no_spi_delay)
++		ndelay(nsecs);
++}
++
++#define spidelay(nsecs) do {					\
++	/* Steal the spi_device pointer from our caller.	\
++	 * The bitbang-API should probably get fixed here... */	\
++	do_spidelay(spi, nsecs);				\
++  } while (0)
++
++#define EXPAND_BITBANG_TXRX
++#include <linux/spi/spi_bitbang.h>
++
++static u32 spi_gpio_txrx_mode0(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
++}
++
++static u32 spi_gpio_txrx_mode1(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
++}
++
++static u32 spi_gpio_txrx_mode2(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
++}
++
++static u32 spi_gpio_txrx_mode3(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
++}
++
++static void spi_gpio_chipselect(struct spi_device *dev, int on)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++
++	if (sp->info->cs_activelow)
++		on = !on;
++	gpio_set_value(sp->info->pin_cs, on ? 1 : 0);
++}
++
++static int spi_gpio_probe(struct platform_device *pdev)
++{
++	struct spi_master *master;
++	struct spi_gpio_platform_data *pdata;
++	struct spi_gpio *sp;
++	struct spi_device *spidev;
++	int err;
++
++	pdata = pdev->dev.platform_data;
++	if (!pdata)
++		return -ENXIO;
++
++	err = -ENOMEM;
++	master = spi_alloc_master(&pdev->dev, sizeof(struct spi_gpio));
++	if (!master)
++		goto err_alloc_master;
++
++	sp = spi_master_get_devdata(master);
++	platform_set_drvdata(pdev, sp);
++	sp->info = pdata;
++
++	err = gpio_request(pdata->pin_clk, "spi_clock");
++	if (err)
++		goto err_request_clk;
++	err = gpio_request(pdata->pin_mosi, "spi_mosi");
++	if (err)
++		goto err_request_mosi;
++	err = gpio_request(pdata->pin_miso, "spi_miso");
++	if (err)
++		goto err_request_miso;
++	err = gpio_request(pdata->pin_cs, "spi_cs");
++	if (err)
++		goto err_request_cs;
++
++	sp->bitbang.master = spi_master_get(master);
++	sp->bitbang.master->bus_num = -1;
++	sp->bitbang.master->num_chipselect = 1;
++	sp->bitbang.chipselect = spi_gpio_chipselect;
++	sp->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_mode0;
++	sp->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_mode1;
++	sp->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_mode2;
++	sp->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_mode3;
++
++	gpio_direction_output(pdata->pin_clk, 0);
++	gpio_direction_output(pdata->pin_mosi, 0);
++	gpio_direction_output(pdata->pin_cs,
++			      pdata->cs_activelow ? 1 : 0);
++	gpio_direction_input(pdata->pin_miso);
++
++	err = spi_bitbang_start(&sp->bitbang);
++	if (err)
++		goto err_no_bitbang;
++	err = pdata->boardinfo_setup(&sp->bi, master,
++				     pdata->boardinfo_setup_data);
++	if (err)
++		goto err_bi_setup;
++	sp->bi.controller_data = sp;
++	spidev = spi_new_device(master, &sp->bi);
++	if (!spidev)
++		goto err_new_dev;
++
++	return 0;
++
++err_new_dev:
++err_bi_setup:
++	spi_bitbang_stop(&sp->bitbang);
++err_no_bitbang:
++	spi_master_put(sp->bitbang.master);
++	gpio_free(pdata->pin_cs);
++err_request_cs:
++	gpio_free(pdata->pin_miso);
++err_request_miso:
++	gpio_free(pdata->pin_mosi);
++err_request_mosi:
++	gpio_free(pdata->pin_clk);
++err_request_clk:
++	kfree(master);
++
++err_alloc_master:
++	return err;
++}
++
++static int __devexit spi_gpio_remove(struct platform_device *pdev)
++{
++	struct spi_gpio *sp;
++	struct spi_gpio_platform_data *pdata;
++
++	pdata = pdev->dev.platform_data;
++	sp = platform_get_drvdata(pdev);
++
++	gpio_free(pdata->pin_clk);
++	gpio_free(pdata->pin_mosi);
++	gpio_free(pdata->pin_miso);
++	gpio_free(pdata->pin_cs);
++	spi_bitbang_stop(&sp->bitbang);
++	spi_master_put(sp->bitbang.master);
++
++	return 0;
++}
++
++static struct platform_driver spi_gpio_driver = {
++	.driver		= {
++		.name	= SPI_GPIO_PLATDEV_NAME,
++		.owner	= THIS_MODULE,
++	},
++	.probe		= spi_gpio_probe,
++	.remove		= __devexit_p(spi_gpio_remove),
++};
++
++int spi_gpio_next_id(void)
++{
++	static atomic_t counter = ATOMIC_INIT(-1);
++
++	return atomic_inc_return(&counter);
++}
++EXPORT_SYMBOL(spi_gpio_next_id);
++
++static int __init spi_gpio_init(void)
++{
++	int err;
++
++	err = platform_driver_register(&spi_gpio_driver);
++	if (err)
++		printk(KERN_ERR "spi-gpio: register failed: %d\n", err);
++
++	return err;
++}
++module_init(spi_gpio_init);
++
++static void __exit spi_gpio_exit(void)
++{
++	platform_driver_unregister(&spi_gpio_driver);
++}
++module_exit(spi_gpio_exit);
++
++MODULE_AUTHOR("Piot Skamruk <piotr.skamruk at gmail.com>");
++MODULE_DESCRIPTION("Platform independent GPIO bitbanging SPI driver");
++MODULE_LICENSE("GPL v2");
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -100,6 +100,19 @@ config SPI_BUTTERFLY
+ 	  inexpensive battery powered microcontroller evaluation board.
+ 	  This same cable can be used to flash new firmware.
+ 
++config SPI_GPIO
++	tristate "GPIO API based bitbanging SPI controller"
++	depends on SPI_MASTER && GENERIC_GPIO
++	select SPI_BITBANG
++	help
++	  This is a platform driver that can be used for bitbanging
++	  an SPI bus over GPIO pins.
++	  Select this if you have any SPI device that is connected via
++	  GPIO pins.
++	  The module will be called spi_gpio.
++
++	  If unsure, say N.
++
+ config SPI_IMX
+ 	tristate "Freescale iMX SPI controller"
+ 	depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -16,6 +16,7 @@ obj-$(CONFIG_SPI_BFIN)			+= spi_bfin5xx.
+ obj-$(CONFIG_SPI_BITBANG)		+= spi_bitbang.o
+ obj-$(CONFIG_SPI_AU1550)		+= au1550_spi.o
+ obj-$(CONFIG_SPI_BUTTERFLY)		+= spi_butterfly.o
++obj-$(CONFIG_SPI_GPIO)			+= spi_gpio.o
+ obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
+ obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
+ obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
diff --git a/target/linux/generic/patches-2.6.25/922-gpiommc.patch b/target/linux/generic/patches-2.6.25/922-gpiommc.patch
new file mode 100644
index 0000000000..b775a0e6bf
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/922-gpiommc.patch
@@ -0,0 +1,818 @@
+--- /dev/null
++++ b/drivers/mmc/host/gpiommc.c
+@@ -0,0 +1,605 @@
++/*
++ * Driver an MMC/SD card on a bitbanging GPIO SPI bus.
++ * This module hooks up the mmc_spi and spi_gpio modules and also
++ * provides a configfs interface.
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include <linux/mmc/gpiommc.h>
++#include <linux/platform_device.h>
++#include <linux/list.h>
++#include <linux/mutex.h>
++#include <linux/spi/spi_gpio.h>
++#include <linux/configfs.h>
++#include <linux/gpio.h>
++#include <asm/atomic.h>
++
++
++#define PFX				"gpio-mmc: "
++
++
++struct gpiommc_device {
++	struct platform_device *pdev;
++	struct platform_device *spi_pdev;
++	struct spi_board_info boardinfo;
++};
++
++
++MODULE_DESCRIPTION("GPIO based MMC driver");
++MODULE_LICENSE("GPL");
++
++
++static int gpiommc_boardinfo_setup(struct spi_board_info *bi,
++				   struct spi_master *master,
++				   void *data)
++{
++	struct gpiommc_device *d = data;
++	struct gpiommc_platform_data *pdata = d->pdev->dev.platform_data;
++
++	/* Bind the SPI master to the MMC-SPI host driver. */
++	strlcpy(bi->modalias, "mmc_spi", sizeof(bi->modalias));
++
++	bi->max_speed_hz = pdata->max_bus_speed;
++	bi->bus_num = master->bus_num;
++	bi->mode = pdata->mode;
++
++	return 0;
++}
++
++static int gpiommc_probe(struct platform_device *pdev)
++{
++	struct gpiommc_platform_data *mmc_pdata = pdev->dev.platform_data;
++	struct spi_gpio_platform_data spi_pdata;
++	struct gpiommc_device *d;
++	int err;
++
++	err = -ENXIO;
++	if (!mmc_pdata)
++		goto error;
++
++#ifdef CONFIG_MMC_SPI_MODULE
++	err = request_module("mmc_spi");
++	if (err) {
++		printk(KERN_WARNING PFX
++		       "Failed to request mmc_spi module.\n");
++	}
++#endif /* CONFIG_MMC_SPI_MODULE */
++
++	/* Allocate the GPIO-MMC device */
++	err = -ENOMEM;
++	d = kzalloc(sizeof(*d), GFP_KERNEL);
++	if (!d)
++		goto error;
++	d->pdev = pdev;
++
++	/* Create the SPI-GPIO device */
++	d->spi_pdev = platform_device_alloc(SPI_GPIO_PLATDEV_NAME,
++					    spi_gpio_next_id());
++	if (!d->spi_pdev)
++		goto err_free_d;
++
++	memset(&spi_pdata, 0, sizeof(spi_pdata));
++	spi_pdata.pin_clk = mmc_pdata->pins.gpio_clk;
++	spi_pdata.pin_miso = mmc_pdata->pins.gpio_do;
++	spi_pdata.pin_mosi = mmc_pdata->pins.gpio_di;
++	spi_pdata.pin_cs = mmc_pdata->pins.gpio_cs;
++	spi_pdata.cs_activelow = mmc_pdata->pins.cs_activelow;
++	spi_pdata.no_spi_delay = mmc_pdata->no_spi_delay;
++	spi_pdata.boardinfo_setup = gpiommc_boardinfo_setup;
++	spi_pdata.boardinfo_setup_data = d;
++
++	err = platform_device_add_data(d->spi_pdev, &spi_pdata,
++				       sizeof(spi_pdata));
++	if (err)
++		goto err_free_pdev;
++	err = platform_device_add(d->spi_pdev);
++	if (err)
++		goto err_free_pdata;
++	platform_set_drvdata(pdev, d);
++
++	printk(KERN_INFO PFX "MMC-Card \"%s\" "
++	       "attached to GPIO pins di=%u, do=%u, clk=%u, cs=%u\n",
++	       mmc_pdata->name, mmc_pdata->pins.gpio_di,
++	       mmc_pdata->pins.gpio_do,
++	       mmc_pdata->pins.gpio_clk,
++	       mmc_pdata->pins.gpio_cs);
++
++	return 0;
++
++err_free_pdata:
++	kfree(d->spi_pdev->dev.platform_data);
++	d->spi_pdev->dev.platform_data = NULL;
++err_free_pdev:
++	platform_device_put(d->spi_pdev);
++err_free_d:
++	kfree(d);
++error:
++	return err;
++}
++
++static int gpiommc_remove(struct platform_device *pdev)
++{
++	struct gpiommc_device *d = platform_get_drvdata(pdev);
++	struct gpiommc_platform_data *pdata = d->pdev->dev.platform_data;
++
++	platform_device_unregister(d->spi_pdev);
++	printk(KERN_INFO PFX "GPIO based MMC-Card \"%s\" removed\n",
++	       pdata->name);
++	platform_device_put(d->spi_pdev);
++
++	return 0;
++}
++
++#ifdef CONFIG_GPIOMMC_CONFIGFS
++
++/* A device that was created through configfs */
++struct gpiommc_configfs_device {
++	struct config_item item;
++	/* The platform device, after registration. */
++	struct platform_device *pdev;
++	/* The configuration */
++	struct gpiommc_platform_data pdata;
++};
++
++#define GPIO_INVALID	-1
++
++static inline bool gpiommc_is_registered(struct gpiommc_configfs_device *dev)
++{
++	return (dev->pdev != NULL);
++}
++
++static inline struct gpiommc_configfs_device *ci_to_gpiommc(struct config_item *item)
++{
++	return item ? container_of(item, struct gpiommc_configfs_device, item) : NULL;
++}
++
++static struct configfs_attribute gpiommc_attr_DI = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_data_in",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_DO = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_data_out",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_CLK = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_clock",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_CS = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_chipselect",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_CS_activelow = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_chipselect_activelow",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_spimode = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "spi_mode",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_spidelay = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "spi_delay",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_max_bus_speed = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "max_bus_speed",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_register = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "register",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute *gpiommc_config_attrs[] = {
++	&gpiommc_attr_DI,
++	&gpiommc_attr_DO,
++	&gpiommc_attr_CLK,
++	&gpiommc_attr_CS,
++	&gpiommc_attr_CS_activelow,
++	&gpiommc_attr_spimode,
++	&gpiommc_attr_spidelay,
++	&gpiommc_attr_max_bus_speed,
++	&gpiommc_attr_register,
++	NULL,
++};
++
++static ssize_t gpiommc_config_attr_show(struct config_item *item,
++					struct configfs_attribute *attr,
++					char *page)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++	ssize_t count = 0;
++	unsigned int gpio;
++	int err = 0;
++
++	if (attr == &gpiommc_attr_DI) {
++		gpio = dev->pdata.pins.gpio_di;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_DO) {
++		gpio = dev->pdata.pins.gpio_do;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CLK) {
++		gpio = dev->pdata.pins.gpio_clk;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS) {
++		gpio = dev->pdata.pins.gpio_cs;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS_activelow) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 dev->pdata.pins.cs_activelow);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spimode) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 dev->pdata.mode);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spidelay) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 !dev->pdata.no_spi_delay);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_max_bus_speed) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 dev->pdata.max_bus_speed);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_register) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 gpiommc_is_registered(dev));
++		goto out;
++	}
++	WARN_ON(1);
++	err = -ENOSYS;
++out:
++	return err ? err : count;
++}
++
++static int gpiommc_do_register(struct gpiommc_configfs_device *dev,
++			       const char *name)
++{
++	int err;
++
++	if (gpiommc_is_registered(dev))
++		return 0;
++
++	if (!gpio_is_valid(dev->pdata.pins.gpio_di) ||
++	    !gpio_is_valid(dev->pdata.pins.gpio_do) ||
++	    !gpio_is_valid(dev->pdata.pins.gpio_clk) ||
++	    !gpio_is_valid(dev->pdata.pins.gpio_cs)) {
++		printk(KERN_ERR PFX
++		       "configfs: Invalid GPIO pin number(s)\n");
++		return -EINVAL;
++	}
++
++	strlcpy(dev->pdata.name, name,
++		sizeof(dev->pdata.name));
++
++	dev->pdev = platform_device_alloc(GPIOMMC_PLATDEV_NAME,
++					  gpiommc_next_id());
++	if (!dev->pdev)
++		return -ENOMEM;
++	err = platform_device_add_data(dev->pdev, &dev->pdata,
++				       sizeof(dev->pdata));
++	if (err) {
++		platform_device_put(dev->pdev);
++		return err;
++	}
++	err = platform_device_add(dev->pdev);
++	if (err) {
++		platform_device_put(dev->pdev);
++		return err;
++	}
++
++	return 0;
++}
++
++static void gpiommc_do_unregister(struct gpiommc_configfs_device *dev)
++{
++	if (!gpiommc_is_registered(dev))
++		return;
++
++	platform_device_unregister(dev->pdev);
++	dev->pdev = NULL;
++}
++
++static ssize_t gpiommc_config_attr_store(struct config_item *item,
++					 struct configfs_attribute *attr,
++					 const char *page, size_t count)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++	int err = -EINVAL;
++	unsigned long data;
++
++	if (attr == &gpiommc_attr_register) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data == 1)
++			err = gpiommc_do_register(dev, item->ci_name);
++		if (data == 0) {
++			gpiommc_do_unregister(dev);
++			err = 0;
++		}
++		goto out;
++	}
++
++	if (gpiommc_is_registered(dev)) {
++		/* The rest of the config parameters can only be set
++		 * as long as the device is not registered, yet. */
++		err = -EBUSY;
++		goto out;
++	}
++
++	if (attr == &gpiommc_attr_DI) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_di = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_DO) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_do = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CLK) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_clk = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_cs = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS_activelow) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data != 0 && data != 1)
++			goto out;
++		dev->pdata.pins.cs_activelow = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spimode) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		switch (data) {
++		case 0:
++			dev->pdata.mode = SPI_MODE_0;
++			break;
++		case 1:
++			dev->pdata.mode = SPI_MODE_1;
++			break;
++		case 2:
++			dev->pdata.mode = SPI_MODE_2;
++			break;
++		case 3:
++			dev->pdata.mode = SPI_MODE_3;
++			break;
++		default:
++			goto out;
++		}
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spidelay) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data != 0 && data != 1)
++			goto out;
++		dev->pdata.no_spi_delay = !data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_max_bus_speed) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data > UINT_MAX)
++			goto out;
++		dev->pdata.max_bus_speed = data;
++		err = 0;
++		goto out;
++	}
++	WARN_ON(1);
++	err = -ENOSYS;
++out:
++	return err ? err : count;
++}
++
++static void gpiommc_config_item_release(struct config_item *item)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++
++	kfree(dev);
++}
++
++static struct configfs_item_operations gpiommc_config_item_ops = {
++	.release		= gpiommc_config_item_release,
++	.show_attribute		= gpiommc_config_attr_show,
++	.store_attribute	= gpiommc_config_attr_store,
++};
++
++static struct config_item_type gpiommc_dev_ci_type = {
++	.ct_item_ops	= &gpiommc_config_item_ops,
++	.ct_attrs	= gpiommc_config_attrs,
++	.ct_owner	= THIS_MODULE,
++};
++
++static struct config_item *gpiommc_make_item(struct config_group *group,
++					     const char *name)
++{
++	struct gpiommc_configfs_device *dev;
++
++	if (strlen(name) > GPIOMMC_MAX_NAMELEN) {
++		printk(KERN_ERR PFX "configfs: device name too long\n");
++		return NULL;
++	}
++
++	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
++	if (!dev)
++		return NULL;
++
++	config_item_init_type_name(&dev->item, name,
++				   &gpiommc_dev_ci_type);
++
++	/* Assign default configuration */
++	dev->pdata.pins.gpio_di = GPIO_INVALID;
++	dev->pdata.pins.gpio_do = GPIO_INVALID;
++	dev->pdata.pins.gpio_clk = GPIO_INVALID;
++	dev->pdata.pins.gpio_cs = GPIO_INVALID;
++	dev->pdata.pins.cs_activelow = 1;
++	dev->pdata.mode = SPI_MODE_0;
++	dev->pdata.no_spi_delay = 0;
++	dev->pdata.max_bus_speed = 5000000; /* 5 MHz */
++
++	return &(dev->item);
++}
++
++static void gpiommc_drop_item(struct config_group *group,
++			      struct config_item *item)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++
++	gpiommc_do_unregister(dev);
++	kfree(dev);
++}
++
++static struct configfs_group_operations gpiommc_ct_group_ops = {
++	.make_item	= gpiommc_make_item,
++	.drop_item	= gpiommc_drop_item,
++};
++
++static struct config_item_type gpiommc_ci_type = {
++	.ct_group_ops	= &gpiommc_ct_group_ops,
++	.ct_owner	= THIS_MODULE,
++};
++
++static struct configfs_subsystem gpiommc_subsys = {
++	.su_group = {
++		.cg_item = {
++			.ci_namebuf = GPIOMMC_PLATDEV_NAME,
++			.ci_type = &gpiommc_ci_type,
++		},
++	},
++	.su_mutex = __MUTEX_INITIALIZER(gpiommc_subsys.su_mutex),
++};
++
++#endif /* CONFIG_GPIOMMC_CONFIGFS */
++
++static struct platform_driver gpiommc_plat_driver = {
++	.probe	= gpiommc_probe,
++	.remove	= gpiommc_remove,
++	.driver	= {
++		.name	= GPIOMMC_PLATDEV_NAME,
++		.owner	= THIS_MODULE,
++	},
++};
++
++int gpiommc_next_id(void)
++{
++	static atomic_t counter = ATOMIC_INIT(-1);
++
++	return atomic_inc_return(&counter);
++}
++EXPORT_SYMBOL(gpiommc_next_id);
++
++static int __init gpiommc_modinit(void)
++{
++	int err;
++
++	err = platform_driver_register(&gpiommc_plat_driver);
++	if (err)
++		return err;
++
++#ifdef CONFIG_GPIOMMC_CONFIGFS
++	config_group_init(&gpiommc_subsys.su_group);
++	err = configfs_register_subsystem(&gpiommc_subsys);
++	if (err) {
++		platform_driver_unregister(&gpiommc_plat_driver);
++		return err;
++	}
++#endif /* CONFIG_GPIOMMC_CONFIGFS */
++
++	return 0;
++}
++module_init(gpiommc_modinit);
++
++static void __exit gpiommc_modexit(void)
++{
++#ifdef CONFIG_GPIOMMC_CONFIGFS
++	configfs_unregister_subsystem(&gpiommc_subsys);
++#endif
++	platform_driver_unregister(&gpiommc_plat_driver);
++}
++module_exit(gpiommc_modexit);
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -130,3 +130,27 @@ config MMC_SPI
+ 
+ 	  If unsure, or if your system has no SPI master driver, say N.
+ 
++config GPIOMMC
++	tristate "MMC/SD over GPIO-based SPI"
++	depends on MMC && MMC_SPI && SPI_GPIO
++	help
++	  This driver hooks up the mmc_spi and spi_gpio modules so that
++	  MMC/SD cards can be used on a GPIO based bus by bitbanging
++	  the SPI protocol in software.
++
++	  This driver provides a configfs interface to dynamically create
++	  and destroy GPIO-based MMC/SD card devices. It also provides
++	  a platform device interface API.
++	  See Documentation/gpiommc.txt for details.
++
++	  The module will be called gpiommc.
++
++	  If unsure, say N.
++
++config GPIOMMC_CONFIGFS
++	bool
++	depends on GPIOMMC && CONFIGFS_FS
++	default y
++	help
++	  This option automatically enables configfs support for gpiommc
++	  if configfs is available.
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -17,4 +17,4 @@ obj-$(CONFIG_MMC_OMAP)		+= omap.o
+ obj-$(CONFIG_MMC_AT91)		+= at91_mci.o
+ obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
+ obj-$(CONFIG_MMC_SPI)		+= mmc_spi.o
+-
++obj-$(CONFIG_GPIOMMC)		+= gpiommc.o
+--- /dev/null
++++ b/include/linux/mmc/gpiommc.h
+@@ -0,0 +1,69 @@
++/*
++ * Device driver for MMC/SD cards driven over a GPIO bus.
++ *
++ * Licensed under the GNU/GPL version 2.
++ */
++#ifndef LINUX_GPIOMMC_H_
++#define LINUX_GPIOMMC_H_
++
++#include <linux/types.h>
++
++
++#define GPIOMMC_MAX_NAMELEN		15
++#define GPIOMMC_MAX_NAMELEN_STR		__stringify(GPIOMMC_MAX_NAMELEN)
++
++/**
++ * struct gpiommc_pins - Hardware pin assignments
++ *
++ * @gpio_di: The GPIO number of the DATA IN pin
++ * @gpio_do: The GPIO number of the DATA OUT pin
++ * @gpio_clk: The GPIO number of the CLOCK pin
++ * @gpio_cs: The GPIO number of the CHIPSELECT pin
++ * @cs_activelow: If true, the chip is considered selected if @gpio_cs is low.
++ */
++struct gpiommc_pins {
++	unsigned int gpio_di;
++	unsigned int gpio_do;
++	unsigned int gpio_clk;
++	unsigned int gpio_cs;
++	bool cs_activelow;
++};
++
++/**
++ * struct gpiommc_platform_data - Platform data for a MMC-over-SPI-GPIO device.
++ *
++ * @name: The unique name string of the device.
++ * @pins: The hardware pin assignments.
++ * @mode: The hardware mode. This is either SPI_MODE_0,
++ *        SPI_MODE_1, SPI_MODE_2 or SPI_MODE_3. See the SPI documentation.
++ * @no_spi_delay: Do not use delays in the lowlevel SPI bitbanging code.
++ *                This is not standards compliant, but may be required for some
++ *                embedded machines to gain reasonable speed.
++ * @max_bus_speed: The maximum speed of the SPI bus, in Hertz.
++ */
++struct gpiommc_platform_data {
++	char name[GPIOMMC_MAX_NAMELEN + 1];
++	struct gpiommc_pins pins;
++	u8 mode;
++	bool no_spi_delay;
++	unsigned int max_bus_speed;
++};
++
++/**
++ * GPIOMMC_PLATDEV_NAME - The platform device name string.
++ *
++ * The name string that has to be used for platform_device_alloc
++ * when allocating a gpiommc device.
++ */
++#define GPIOMMC_PLATDEV_NAME	"gpiommc"
++
++/**
++ * gpiommc_next_id - Get another platform device ID number.
++ *
++ * This returns the next platform device ID number that has to be used
++ * for platform_device_alloc. The ID is opaque and should not be used for
++ * anything else.
++ */
++int gpiommc_next_id(void);
++
++#endif /* LINUX_GPIOMMC_H_ */
+--- /dev/null
++++ b/Documentation/gpiommc.txt
+@@ -0,0 +1,97 @@
++GPIOMMC - Driver for an MMC/SD card on a bitbanging GPIO SPI bus
++================================================================
++
++The gpiommc module hooks up the mmc_spi and spi_gpio modules for running an
++MMC or SD card on GPIO pins.
++
++Two interfaces for registering a new MMC/SD card device are provided:
++A static platform-device based mechanism and a dynamic configfs based interface.
++
++
++Registering devices via platform-device
++=======================================
++
++The platform-device interface is used for registering MMC/SD devices that are
++part of the hardware platform. This is most useful only for embedded machines
++with MMC/SD devices statically connected to the platform GPIO bus.
++
++The data structures are declared in <linux/mmc/gpiommc.h>.
++
++To register a new device, define an instance of struct gpiommc_platform_data.
++This structure holds any information about how the device is hooked up to the
++GPIO pins and what hardware modes the device supports. See the docbook-style
++documentation in the header file for more information on the struct fields.
++
++Then allocate a new instance of a platform device by doing:
++
++	pdev = platform_device_alloc(GPIOMMC_PLATDEV_NAME, gpiommc_next_id());
++
++This will allocate the platform device data structures and hook it up to the
++gpiommc driver.
++Then add the gpiommc_platform_data to the platform device.
++
++	err = platform_device_add_data(pdev, pdata, sizeof(struct gpiommc_platform_data));
++
++You may free the local instance of struct gpiommc_platform_data now. (So the
++struct may be allocated on the stack, too).
++Now simply register the platform device.
++
++	err = platform_device_add(pdev);
++
++Done. The gpiommc probe routine will be invoked now and you should see a kernel
++log message for the added device.
++
++
++Registering devices via configfs
++================================
++
++MMC/SD cards connected via GPIO often are a pretty dynamic thing, as for example
++selfmade hacks for soldering an MMC/SD card to standard GPIO pins on embedded
++hardware are a common situation.
++So we provide a dynamic interface to conveniently handle adding and removing
++devices from userspace, without the need to recompile the kernel.
++
++The "gpiommc" subdirectory at the configfs mountpoint is used for handling
++the dynamic configuration.
++
++To create a new device, it must first be allocated with mkdir.
++The following command will allocate a device named "my_mmc":
++	mkdir /config/gpiommc/my_mmc
++
++There are several configuration files available in the new
++/config/gpiommc/my_mmc/ directory:
++
++gpio_data_in			= The SPI data-IN GPIO pin number.
++gpio_data_out			= The SPI data-OUT GPIO pin number.
++gpio_clock			= The SPI Clock GPIO pin number.
++gpio_chipselect			= The SPI Chipselect GPIO pin number.
++gpio_chipselect_activelow	= Boolean. If 0, Chipselect is active-HIGH.
++				  If 1, Chipselect is active-LOW.
++spi_mode			= The SPI data mode. Can be 0-3.
++spi_delay			= Enable all delays in the lowlevel bitbanging.
++max_bus_speed			= The maximum SPI bus speed. In Hertz.
++
++register			= Not a configuration parameter.
++				  Used to register the configured card
++				  with the kernel.
++
++The device must first get configured and then registered by writing "1" to
++the "register" file.
++The configuration parameters "gpio_data_in", "gpio_data_out", "gpio_clock"
++and "gpio_chipselect" are essential and _must_ be configured before writing
++"1" to the "register" file. The registration will fail, otherwise.
++
++The default values for the other parameters are:
++gpio_chipselect_activelow	= 1		(CS active-LOW)
++spi_mode			= 0		(SPI_MODE_0)
++spi_delay			= 1		(enabled)
++max_bus_speed			= 5000000	(5 Mhz)
++
++Configuration values can not be changed after registration. To unregister
++the device, write a "0" to the "register" file. The configuration can be
++changed again after unregistering.
++
++To completely remove the device, simply rmdir the directory
++(/config/gpiommc/my_mmc in this example).
++There's no need to first unregister the device before removing it. That will
++be done automatically.
diff --git a/target/linux/generic/patches-2.6.25/923-gpiommc-configfs-locking.patch b/target/linux/generic/patches-2.6.25/923-gpiommc-configfs-locking.patch
new file mode 100644
index 0000000000..c84f62b447
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/923-gpiommc-configfs-locking.patch
@@ -0,0 +1,58 @@
+The gpiommc configfs context structure needs locking, as configfs
+does not lock access between files.
+
+--- a/drivers/mmc/host/gpiommc.c
++++ b/drivers/mmc/host/gpiommc.c
+@@ -140,6 +140,8 @@ struct gpiommc_configfs_device {
+ 	struct platform_device *pdev;
+ 	/* The configuration */
+ 	struct gpiommc_platform_data pdata;
++	/* Mutex to protect this structure */
++	struct mutex mutex;
+ };
+ 
+ #define GPIO_INVALID	-1
+@@ -230,6 +232,8 @@ static ssize_t gpiommc_config_attr_show(
+ 	unsigned int gpio;
+ 	int err = 0;
+ 
++	mutex_lock(&dev->mutex);
++
+ 	if (attr == &gpiommc_attr_DI) {
+ 		gpio = dev->pdata.pins.gpio_di;
+ 		if (gpio == GPIO_INVALID)
+@@ -290,6 +294,8 @@ static ssize_t gpiommc_config_attr_show(
+ 	WARN_ON(1);
+ 	err = -ENOSYS;
+ out:
++	mutex_unlock(&dev->mutex);
++
+ 	return err ? err : count;
+ }
+ 
+@@ -349,6 +355,8 @@ static ssize_t gpiommc_config_attr_store
+ 	int err = -EINVAL;
+ 	unsigned long data;
+ 
++	mutex_lock(&dev->mutex);
++
+ 	if (attr == &gpiommc_attr_register) {
+ 		err = strict_strtoul(page, 10, &data);
+ 		if (err)
+@@ -474,6 +482,8 @@ static ssize_t gpiommc_config_attr_store
+ 	WARN_ON(1);
+ 	err = -ENOSYS;
+ out:
++	mutex_unlock(&dev->mutex);
++
+ 	return err ? err : count;
+ }
+ 
+@@ -510,6 +520,7 @@ static struct config_item *gpiommc_make_
+ 	if (!dev)
+ 		return NULL;
+ 
++	mutex_init(&dev->mutex);
+ 	config_item_init_type_name(&dev->item, name,
+ 				   &gpiommc_dev_ci_type);
+ 
diff --git a/target/linux/generic/patches-2.6.25/930-ppc_big_endian_io_memory_accessors.patch b/target/linux/generic/patches-2.6.25/930-ppc_big_endian_io_memory_accessors.patch
new file mode 100644
index 0000000000..25abf821df
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/930-ppc_big_endian_io_memory_accessors.patch
@@ -0,0 +1,78 @@
+From a.othieno@bluewin.ch Tue Oct 11 07:50:21 2005
+From: Arthur Othieno <a.othieno@bluewin.ch>
+Subject: Big-endian I/O memory accessors.
+Date: Tue, 11 Oct 2005 07:50:21 +1000
+X-Patchwork-ID: 2759
+
+From: Arthur Othieno <a.othieno@bluewin.ch>
+
+I/O memory accessors. Big endian version. For those busses/devices
+that do export big-endian I/O memory.
+
+Of notable relevance/reference:
+
+  http://lwn.net/Articles/132804/
+  http://ozlabs.org/pipermail/linuxppc-embedded/2005-August/019798.html
+  http://ozlabs.org/pipermail/linuxppc-embedded/2005-August/019752.html
+
+Signed-off-by: Arthur Othieno <a.othieno@bluewin.ch>
+---
+
+Paulus, 
+
+A similar patch for ppc64 made it upstream with your big ppc64 merge.
+This one is still sitting in http://patchwork.ozlabs.org/linuxppc/
+and didn't make it with the ppc32 equivalent. Thanks.
+
+
+ include/asm-ppc/io.h |   20 ++++++++++++++++++++
+ 1 file changed, 20 insertions(+)
+
+
+---
+--- a/include/asm-ppc/io.h
++++ b/include/asm-ppc/io.h
+@@ -413,11 +413,21 @@ static inline unsigned int ioread16(void
+ 	return readw(addr);
+ }
+ 
++static inline unsigned int ioread16be(void __iomem *addr)
++{
++	return in_be16(addr);
++}
++
+ static inline unsigned int ioread32(void __iomem *addr)
+ {
+ 	return readl(addr);
+ }
+ 
++static inline unsigned int ioread32be(void __iomem *addr)
++{
++	return in_be32(addr);
++}
++
+ static inline void iowrite8(u8 val, void __iomem *addr)
+ {
+ 	writeb(val, addr);
+@@ -428,11 +438,21 @@ static inline void iowrite16(u16 val, vo
+ 	writew(val, addr);
+ }
+ 
++static inline void iowrite16be(u16 val, void __iomem *addr)
++{
++	out_be16(addr, val);
++}
++
+ static inline void iowrite32(u32 val, void __iomem *addr)
+ {
+ 	writel(val, addr);
+ }
+ 
++static inline void iowrite32be(u32 val, void __iomem *addr)
++{
++	out_be32(addr, val);
++}
++
+ static inline void ioread8_rep(void __iomem *addr, void *dst, unsigned long count)
+ {
+ 	_insb(addr, dst, count);
diff --git a/target/linux/generic/patches-2.6.25/940-arm_mach_types.patch b/target/linux/generic/patches-2.6.25/940-arm_mach_types.patch
new file mode 100644
index 0000000000..3fd993812a
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/940-arm_mach_types.patch
@@ -0,0 +1,149 @@
+--- a/arch/arm/tools/mach-types
++++ b/arch/arm/tools/mach-types
+@@ -12,7 +12,7 @@
+ #
+ #   http://www.arm.linux.org.uk/developer/machines/?action=new
+ #
+-# Last update: Sat Jan 26 14:45:34 2008
++# Last update: Sat Apr 19 15:13:28 2008
+ #
+ # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
+ #
+@@ -381,13 +381,13 @@ ks8695p			ARCH_KS8695P		KS8695P			363
+ se4000			ARCH_SE4000		SE4000			364
+ quadriceps		ARCH_QUADRICEPS		QUADRICEPS		365
+ bronco			ARCH_BRONCO		BRONCO			366
+-esl_wireless_tab	ARCH_ESL_WIRELESS_TABLETESL_WIRELESS_TABLET	367
++esl_wireless_tab	ARCH_ESL_WIRELESS_TAB	ESL_WIRELESS_TAB	367
+ esl_sofcomp		ARCH_ESL_SOFCOMP	ESL_SOFCOMP		368
+ s5c7375			ARCH_S5C7375		S5C7375			369
+ spearhead		ARCH_SPEARHEAD		SPEARHEAD		370
+ pantera			ARCH_PANTERA		PANTERA			371
+ prayoglite		ARCH_PRAYOGLITE		PRAYOGLITE		372
+-gumstix			ARCH_GUMSTIK		GUMSTIK			373
++gumstix			ARCH_GUMSTIX		GUMSTIX			373
+ rcube			ARCH_RCUBE		RCUBE			374
+ rea_olv			ARCH_REA_OLV		REA_OLV			375
+ pxa_iphone		ARCH_PXA_IPHONE		PXA_IPHONE		376
+@@ -1463,7 +1463,7 @@ artemis			MACH_ARTEMIS		ARTEMIS			1462
+ htctitan		MACH_HTCTITAN		HTCTITAN		1463
+ qranium			MACH_QRANIUM		QRANIUM			1464
+ adx_wsc2		MACH_ADX_WSC2		ADX_WSC2		1465
+-adx_medinet		MACH_ADX_MEDINET	ADX_MEDINET		1466
++adx_medcom		MACH_ADX_MEDINET	ADX_MEDINET		1466
+ bboard			MACH_BBOARD		BBOARD			1467
+ cambria			MACH_CAMBRIA		CAMBRIA			1468
+ mt7xxx			MACH_MT7XXX		MT7XXX			1469
+@@ -1611,3 +1611,112 @@ kb9263			MACH_KB9263		KB9263			1612
+ mt7108			MACH_MT7108		MT7108			1613
+ smtr2440		MACH_SMTR2440		SMTR2440		1614
+ manao			MACH_MANAO		MANAO			1615
++cm_x300			MACH_CM_X300		CM_X300			1616
++gulfstream_kp		MACH_GULFSTREAM_KP	GULFSTREAM_KP		1617
++lanreadyfn522		MACH_LANREADYFN522	LANREADYFN522		1618
++arma37			MACH_ARMA37		ARMA37			1619
++mendel			MACH_MENDEL		MENDEL			1620
++pelco_iliad		MACH_PELCO_ILIAD	PELCO_ILIAD		1621
++unit2p			MACH_UNIT2P		UNIT2P			1622
++inc20otter		MACH_INC20OTTER		INC20OTTER		1623
++at91sam9g20ek		MACH_AT91SAM9G20EK	AT91SAM9G20EK		1624
++sc_ge2			MACH_STORCENTER		STORCENTER		1625
++smdk6410		MACH_SMDK6410		SMDK6410		1626
++u300			MACH_U300		U300			1627
++u500			MACH_U500		U500			1628
++ds9260			MACH_DS9260		DS9260			1629
++riverrock		MACH_RIVERROCK		RIVERROCK		1630
++scibath			MACH_SCIBATH		SCIBATH			1631
++at91sam7se		MACH_AT91SAM7SE512EK	AT91SAM7SE512EK		1632
++wrt350n_v2		MACH_WRT350N_V2		WRT350N_V2		1633
++multimedia		MACH_MULTIMEDIA		MULTIMEDIA		1634
++marvin			MACH_MARVIN		MARVIN			1635
++x500			MACH_X500		X500			1636
++awlug4lcu		MACH_AWLUG4LCU		AWLUG4LCU		1637
++palermoc		MACH_PALERMOC		PALERMOC		1638
++omap_ldp		MACH_OMAP_LDP		OMAP_LDP		1639
++ip500			MACH_IP500		IP500			1640
++mx35ads			MACH_MACH_MX35ADS	MACH_MX35ADS		1641
++ase2			MACH_ASE2		ASE2			1642
++mx35evb			MACH_MX35EVB		MX35EVB			1643
++aml_m8050		MACH_AML_M8050		AML_M8050		1644
++mx35_3ds		MACH_MX35_3DS		MX35_3DS		1645
++mars			MACH_MARS		MARS			1646
++ntosd_644xa		MACH_NTOSD_644XA	NTOSD_644XA		1647
++badger			MACH_BADGER		BADGER			1648
++trizeps4wl		MACH_TRIZEPS4WL		TRIZEPS4WL		1649
++trizeps5		MACH_TRIZEPS5		TRIZEPS5		1650
++marlin			MACH_MARLIN		MARLIN			1651
++ts7800			MACH_TS7800		TS7800			1652
++hpipaq214		MACH_HPIPAQ214		HPIPAQ214		1653
++at572d940dcm		MACH_AT572D940DCM	AT572D940DCM		1654
++ne1board		MACH_NE1BOARD		NE1BOARD		1655
++zante			MACH_ZANTE		ZANTE			1656
++sffsdr			MACH_SFFSDR		SFFSDR			1657
++tw2662			MACH_TW2662		TW2662			1658
++vf10xx			MACH_VF10XX		VF10XX			1659
++zoran43xx		MACH_ZORAN43XX		ZORAN43XX		1660
++sonix926		MACH_SONIX926		SONIX926		1661
++celestialsemi		MACH_CELESTIALSEMI	CELESTIALSEMI		1662
++cc9m2443		MACH_CC9M2443		CC9M2443		1663
++tw5334			MACH_TW5334		TW5334			1664
++omap_htcartemis		MACH_HTCARTEMIS		HTCARTEMIS		1665
++nal_hlite		MACH_NAL_HLITE		NAL_HLITE		1666
++htcvogue		MACH_HTCVOGUE		HTCVOGUE		1667
++smartweb		MACH_SMARTWEB		SMARTWEB		1668
++mv86xx			MACH_MV86XX		MV86XX			1669
++mv87xx			MACH_MV87XX		MV87XX			1670
++songyoungho		MACH_SONGYOUNGHO	SONGYOUNGHO		1671
++younghotema		MACH_YOUNGHOTEMA	YOUNGHOTEMA		1672
++pcm037			MACH_PCM037		PCM037			1673
++mmvp			MACH_MMVP		MMVP			1674
++mmap			MACH_MMAP		MMAP			1675
++ptid2410		MACH_PTID2410		PTID2410		1676
++james_926		MACH_JAMES_926		JAMES_926		1677
++fm6000			MACH_FM6000		FM6000			1678
++db88f6281_bp		MACH_DB88F6281_BP	DB88F6281_BP		1680
++rd88f6192_nas		MACH_RD88F6192_NAS	RD88F6192_NAS		1681
++rd88f6281		MACH_RD88F6281		RD88F6281		1682
++db78x00_bp		MACH_DB78X00_BP		DB78X00_BP		1683
++smdk2416		MACH_SMDK2416		SMDK2416		1685
++oce_spider_si		MACH_OCE_SPIDER_SI	OCE_SPIDER_SI		1686
++oce_spider_sk		MACH_OCE_SPIDER_SK	OCE_SPIDER_SK		1687
++rovern6			MACH_ROVERN6		ROVERN6			1688
++pelco_evolution		MACH_PELCO_EVOLUTION	PELCO_EVOLUTION		1689
++wbd111			MACH_WBD111		WBD111			1690
++elaracpe		MACH_ELARACPE		ELARACPE		1691
++mabv3			MACH_MABV3		MABV3			1692
++mv2120			MACH_MV2120		MV2120			1693
++csb737			MACH_CSB737		CSB737			1695
++mx51_3ds		MACH_MX51_3DS		MX51_3DS		1696
++g900			MACH_G900		G900			1697
++apf27			MACH_APF27		APF27			1698
++ggus2000		MACH_GGUS2000		GGUS2000		1699
++omap_2430_mimic		MACH_OMAP_2430_MIMIC	OMAP_2430_MIMIC		1700
++imx27lite		MACH_IMX27LITE		IMX27LITE		1701
++almex			MACH_ALMEX		ALMEX			1702
++control			MACH_CONTROL		CONTROL			1703
++mba2410			MACH_MBA2410		MBA2410			1704
++volcano			MACH_VOLCANO		VOLCANO			1705
++zenith			MACH_ZENITH		ZENITH			1706
++muchip			MACH_MUCHIP		MUCHIP			1707
++magellan		MACH_MAGELLAN		MAGELLAN		1708
++usb_a9260		MACH_USB_A9260		USB_A9260		1709
++usb_a9263		MACH_USB_A9263		USB_A9263		1710
++qil_a9260		MACH_QIL_A9260		QIL_A9260		1711
++cme9210			MACH_CME9210		CME9210			1712
++hczh4			MACH_HCZH4		HCZH4			1713
++spearbasic		MACH_SPEARBASIC		SPEARBASIC		1714
++dep2440			MACH_DEP2440		DEP2440			1715
++hdl_gxr			MACH_HDL_GXR		HDL_GXR			1716
++hdl_gt			MACH_HDL_GT		HDL_GT			1717
++hdl_4g			MACH_HDL_4G		HDL_4G			1718
++s3c6000			MACH_S3C6000		S3C6000			1719
++mmsp2_mdk		MACH_MMSP2_MDK		MMSP2_MDK		1720
++mpx220			MACH_MPX220		MPX220			1721
++kzm_arm11_01		MACH_KZM_ARM11_01	KZM_ARM11_01		1722
++htc_polaris		MACH_HTC_POLARIS	HTC_POLARIS		1723
++htc_kaiser		MACH_HTC_KAISER		HTC_KAISER		1724
++lg_ks20			MACH_LG_KS20		LG_KS20			1725
++hhgps			MACH_HHGPS		HHGPS			1726
++nokia_n810_wimax	MACH_NOKIA_N810_WIMAX	NOKIA_N810_WIMAX	1727
diff --git a/target/linux/generic/patches-2.6.25/960-backport_gpiolib_better_rmmod_infrastructure.patch b/target/linux/generic/patches-2.6.25/960-backport_gpiolib_better_rmmod_infrastructure.patch
new file mode 100644
index 0000000000..8da25daa75
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/960-backport_gpiolib_better_rmmod_infrastructure.patch
@@ -0,0 +1,89 @@
+From: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
+Date: Mon, 28 Apr 2008 09:14:44 +0000 (-0700)
+Subject: gpiolib: better rmmod infrastructure
+X-Git-Tag: v2.6.26-rc1~851
+X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Ftorvalds%2Flinux-2.6.git;a=commitdiff_plain;h=438d8908b379b6322fc3b28d45c9ebdddf58bc20
+
+gpiolib: better rmmod infrastructure
+
+As long as one or more GPIOs on a gpio chip are used its driver should not be
+unloaded.  The existing mechanism (gpiochip_remove failure) doesn't address
+that, since rmmod can no longer be made to fail by having the cleanup code
+report errors.  Module usecounts are the solution.
+
+Assuming standard "initialize struct to zero" policies, this change won't
+affect SOC platform drivers.  However, drivers for external chips (on I2C and
+SPI busses) should be updated if they can be built as modules.
+
+Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
+[ gpio_ensure_requested() needs to update module usecounts too ]
+Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
+Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
+---
+
+--- a/drivers/gpio/gpiolib.c
++++ b/drivers/gpio/gpiolib.c
+@@ -68,6 +68,9 @@ static void gpio_ensure_requested(struct
+ 	if (test_and_set_bit(FLAG_REQUESTED, &desc->flags) == 0) {
+ 		pr_warning("GPIO-%d autorequested\n", (int)(desc - gpio_desc));
+ 		desc_set_label(desc, "[auto]");
++		if (!try_module_get(desc->chip->owner))
++			pr_err("GPIO-%d: module can't be gotten \n",
++					(int)(desc - gpio_desc));
+ 	}
+ }
+ 
+@@ -177,6 +180,9 @@ int gpio_request(unsigned gpio, const ch
+ 	if (desc->chip == NULL)
+ 		goto done;
+ 
++	if (!try_module_get(desc->chip->owner))
++		goto done;
++
+ 	/* NOTE:  gpio_request() can be called in early boot,
+ 	 * before IRQs are enabled.
+ 	 */
+@@ -184,8 +190,10 @@ int gpio_request(unsigned gpio, const ch
+ 	if (test_and_set_bit(FLAG_REQUESTED, &desc->flags) == 0) {
+ 		desc_set_label(desc, label ? : "?");
+ 		status = 0;
+-	} else
++	} else {
+ 		status = -EBUSY;
++		module_put(desc->chip->owner);
++	}
+ 
+ done:
+ 	if (status)
+@@ -209,9 +217,10 @@ void gpio_free(unsigned gpio)
+ 	spin_lock_irqsave(&gpio_lock, flags);
+ 
+ 	desc = &gpio_desc[gpio];
+-	if (desc->chip && test_and_clear_bit(FLAG_REQUESTED, &desc->flags))
++	if (desc->chip && test_and_clear_bit(FLAG_REQUESTED, &desc->flags)) {
+ 		desc_set_label(desc, NULL);
+-	else
++		module_put(desc->chip->owner);
++	} else
+ 		WARN_ON(extra_checks);
+ 
+ 	spin_unlock_irqrestore(&gpio_lock, flags);
+--- a/include/asm-generic/gpio.h
++++ b/include/asm-generic/gpio.h
+@@ -17,6 +17,7 @@
+ #endif
+ 
+ struct seq_file;
++struct module;
+ 
+ /**
+  * struct gpio_chip - abstract a GPIO controller
+@@ -48,6 +49,7 @@ struct seq_file;
+  */
+ struct gpio_chip {
+ 	char			*label;
++	struct module		*owner;
+ 
+ 	int			(*direction_input)(struct gpio_chip *chip,
+ 						unsigned offset);
diff --git a/target/linux/generic/patches-2.6.25/961-backport_gpio_define_gpio_valid.patch b/target/linux/generic/patches-2.6.25/961-backport_gpio_define_gpio_valid.patch
new file mode 100644
index 0000000000..771b743baf
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/961-backport_gpio_define_gpio_valid.patch
@@ -0,0 +1,134 @@
+From: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
+Date: Mon, 28 Apr 2008 09:14:46 +0000 (-0700)
+Subject: gpio: define gpio_is_valid()
+X-Git-Tag: v2.6.26-rc1~849
+X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Ftorvalds%2Flinux-2.6.git;a=commitdiff_plain;h=e6de1808f8ebfeb7e49f3c5a30cb8f2032beb287
+
+gpio: define gpio_is_valid()
+
+Introduce a gpio_is_valid() predicate; use it in gpiolib.
+
+Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
+    [ use inline function; follow the gpio_* naming convention;
+      work without gpiolib; all programming interfaces need docs ]
+Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
+Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
+---
+
+--- a/Documentation/gpio.txt
++++ b/Documentation/gpio.txt
+@@ -107,6 +107,16 @@ type of GPIO controller, and on one part
+ The numbers need not be contiguous; either of those platforms could also
+ use numbers 2000-2063 to identify GPIOs in a bank of I2C GPIO expanders.
+ 
++If you want to initialize a structure with an invalid GPIO number, use
++some negative number (perhaps "-EINVAL"); that will never be valid.  To
++test if a number could reference a GPIO, you may use this predicate:
++
++	int gpio_is_valid(int number);
++
++A number that's not valid will be rejected by calls which may request
++or free GPIOs (see below).  Other numbers may also be rejected; for
++example, a number might be valid but unused on a given board.
++
+ Whether a platform supports multiple GPIO controllers is currently a
+ platform-specific implementation issue.
+ 
+--- a/drivers/gpio/gpiolib.c
++++ b/drivers/gpio/gpiolib.c
+@@ -99,7 +99,7 @@ int gpiochip_add(struct gpio_chip *chip)
+ 	 * dynamic allocation.  We don't currently support that.
+ 	 */
+ 
+-	if (chip->base < 0 || (chip->base  + chip->ngpio) >= ARCH_NR_GPIOS) {
++	if (chip->base < 0 || !gpio_is_valid(chip->base  + chip->ngpio)) {
+ 		status = -EINVAL;
+ 		goto fail;
+ 	}
+@@ -174,7 +174,7 @@ int gpio_request(unsigned gpio, const ch
+ 
+ 	spin_lock_irqsave(&gpio_lock, flags);
+ 
+-	if (gpio >= ARCH_NR_GPIOS)
++	if (!gpio_is_valid(gpio))
+ 		goto done;
+ 	desc = &gpio_desc[gpio];
+ 	if (desc->chip == NULL)
+@@ -209,7 +209,7 @@ void gpio_free(unsigned gpio)
+ 	unsigned long		flags;
+ 	struct gpio_desc	*desc;
+ 
+-	if (gpio >= ARCH_NR_GPIOS) {
++	if (!gpio_is_valid(gpio)) {
+ 		WARN_ON(extra_checks);
+ 		return;
+ 	}
+@@ -245,7 +245,7 @@ const char *gpiochip_is_requested(struct
+ {
+ 	unsigned gpio = chip->base + offset;
+ 
+-	if (gpio >= ARCH_NR_GPIOS || gpio_desc[gpio].chip != chip)
++	if (!gpio_is_valid(gpio) || gpio_desc[gpio].chip != chip)
+ 		return NULL;
+ 	if (test_bit(FLAG_REQUESTED, &gpio_desc[gpio].flags) == 0)
+ 		return NULL;
+@@ -276,7 +276,7 @@ int gpio_direction_input(unsigned gpio)
+ 
+ 	spin_lock_irqsave(&gpio_lock, flags);
+ 
+-	if (gpio >= ARCH_NR_GPIOS)
++	if (!gpio_is_valid(gpio))
+ 		goto fail;
+ 	chip = desc->chip;
+ 	if (!chip || !chip->get || !chip->direction_input)
+@@ -314,7 +314,7 @@ int gpio_direction_output(unsigned gpio,
+ 
+ 	spin_lock_irqsave(&gpio_lock, flags);
+ 
+-	if (gpio >= ARCH_NR_GPIOS)
++	if (!gpio_is_valid(gpio))
+ 		goto fail;
+ 	chip = desc->chip;
+ 	if (!chip || !chip->set || !chip->direction_output)
+@@ -531,7 +531,7 @@ static int gpiolib_show(struct seq_file 
+ 
+ 	/* REVISIT this isn't locked against gpio_chip removal ... */
+ 
+-	for (gpio = 0; gpio < ARCH_NR_GPIOS; gpio++) {
++	for (gpio = 0; gpio_is_valid(gpio); gpio++) {
+ 		if (chip == gpio_desc[gpio].chip)
+ 			continue;
+ 		chip = gpio_desc[gpio].chip;
+--- a/include/asm-generic/gpio.h
++++ b/include/asm-generic/gpio.h
+@@ -16,6 +16,12 @@
+ #define ARCH_NR_GPIOS		256
+ #endif
+ 
++static inline int gpio_is_valid(int number)
++{
++	/* only some non-negative numbers are valid */
++	return ((unsigned)number) < ARCH_NR_GPIOS;
++}
++
+ struct seq_file;
+ struct module;
+ 
+@@ -99,6 +105,16 @@ extern int __gpio_cansleep(unsigned gpio
+ 
+ #else
+ 
++static inline int __gpio_is_valid(int number)
++{
++	/* only non-negative numbers are valid */
++	return number >= 0;
++}
++
++#ifndef gpio_is_valid
++#define gpio_is_valid	__gpio_is_valid
++#endif
++
+ /* platforms that don't directly support access to GPIOs through I2C, SPI,
+  * or other blocking infrastructure can use these wrappers.
+  */
diff --git a/target/linux/generic/patches-2.6.25/962-backport_gpiolib_dynamic_gpio_number_allocation.patch b/target/linux/generic/patches-2.6.25/962-backport_gpiolib_dynamic_gpio_number_allocation.patch
new file mode 100644
index 0000000000..0960f6764d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/962-backport_gpiolib_dynamic_gpio_number_allocation.patch
@@ -0,0 +1,116 @@
+From: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon, 28 Apr 2008 09:14:46 +0000 (-0700)
+Subject: gpiolib: dynamic gpio number allocation
+X-Git-Tag: v2.6.26-rc1~848
+X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Ftorvalds%2Flinux-2.6.git;a=commitdiff_plain;h=8d0aab2f16c4fa170f32e7a74a52cd0122bbafef
+
+gpiolib: dynamic gpio number allocation
+
+If gpio_chip->base is negative during registration, gpiolib performs dynamic
+base allocation.  This is useful for devices that aren't always present, such
+as GPIOs on hotplugged devices rather than mainboards.  (This behavior was
+previously specified but not implemented.)
+
+To avoid using any numbers that may have been explicitly assigned but not yet
+registered, this dynamic allocation assigns GPIO numbers from the biggest
+number on down, instead of from the smallest on up.
+
+Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
+Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
+---
+
+--- a/drivers/gpio/gpiolib.c
++++ b/drivers/gpio/gpiolib.c
+@@ -80,6 +80,33 @@ static inline struct gpio_chip *gpio_to_
+ 	return gpio_desc[gpio].chip;
+ }
+ 
++/* dynamic allocation of GPIOs, e.g. on a hotplugged device */
++static int gpiochip_find_base(int ngpio)
++{
++	int i;
++	int spare = 0;
++	int base = -ENOSPC;
++
++	for (i = ARCH_NR_GPIOS - 1; i >= 0 ; i--) {
++		struct gpio_chip *chip = gpio_desc[i].chip;
++
++		if (!chip) {
++			spare++;
++			if (spare == ngpio) {
++				base = i;
++				break;
++			}
++		} else {
++			spare = 0;
++			i -= chip->ngpio - 1;
++		}
++	}
++
++	if (gpio_is_valid(base))
++		pr_debug("%s: found new base at %d\n", __func__, base);
++	return base;
++}
++
+ /**
+  * gpiochip_add() - register a gpio_chip
+  * @chip: the chip to register, with chip->base initialized
+@@ -88,38 +115,49 @@ static inline struct gpio_chip *gpio_to_
+  * Returns a negative errno if the chip can't be registered, such as
+  * because the chip->base is invalid or already associated with a
+  * different chip.  Otherwise it returns zero as a success code.
++ *
++ * If chip->base is negative, this requests dynamic assignment of
++ * a range of valid GPIOs.
+  */
+ int gpiochip_add(struct gpio_chip *chip)
+ {
+ 	unsigned long	flags;
+ 	int		status = 0;
+ 	unsigned	id;
++	int		base = chip->base;
+ 
+-	/* NOTE chip->base negative is reserved to mean a request for
+-	 * dynamic allocation.  We don't currently support that.
+-	 */
+-
+-	if (chip->base < 0 || !gpio_is_valid(chip->base  + chip->ngpio)) {
++	if ((!gpio_is_valid(base) || !gpio_is_valid(base + chip->ngpio))
++			&& base >= 0) {
+ 		status = -EINVAL;
+ 		goto fail;
+ 	}
+ 
+ 	spin_lock_irqsave(&gpio_lock, flags);
+ 
++	if (base < 0) {
++		base = gpiochip_find_base(chip->ngpio);
++		if (base < 0) {
++			status = base;
++			goto fail_unlock;
++		}
++		chip->base = base;
++	}
++
+ 	/* these GPIO numbers must not be managed by another gpio_chip */
+-	for (id = chip->base; id < chip->base + chip->ngpio; id++) {
++	for (id = base; id < base + chip->ngpio; id++) {
+ 		if (gpio_desc[id].chip != NULL) {
+ 			status = -EBUSY;
+ 			break;
+ 		}
+ 	}
+ 	if (status == 0) {
+-		for (id = chip->base; id < chip->base + chip->ngpio; id++) {
++		for (id = base; id < base + chip->ngpio; id++) {
+ 			gpio_desc[id].chip = chip;
+ 			gpio_desc[id].flags = 0;
+ 		}
+ 	}
+ 
++fail_unlock:
+ 	spin_unlock_irqrestore(&gpio_lock, flags);
+ fail:
+ 	/* failures here can mean systems won't boot... */
diff --git a/target/linux/generic/patches-2.6.25/963-backport_gpio_chip_reserve.patch b/target/linux/generic/patches-2.6.25/963-backport_gpio_chip_reserve.patch
new file mode 100644
index 0000000000..abf77c3559
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/963-backport_gpio_chip_reserve.patch
@@ -0,0 +1,112 @@
+From: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon, 28 Apr 2008 09:14:47 +0000 (-0700)
+Subject: gpiochip_reserve()
+X-Git-Tag: v2.6.26-rc1~847
+X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Ftorvalds%2Flinux-2.6.git;a=commitdiff_plain;h=169b6a7a6e91e1ea32136681b475cbaf2074bf35
+
+gpiochip_reserve()
+
+Add a new function gpiochip_reserve() to reserve ranges of gpios that platform
+code has pre-allocated.  That is, this marks gpio numbers which will be
+claimed by drivers that haven't yet been loaded, and thus are not available
+for dynamic gpio number allocation.
+
+[akpm@linux-foundation.org: remove unneeded __must_check]
+[david-b@pacbell.net: don't export gpiochip_reserve (section fix)]
+Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
+Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
+---
+
+--- a/drivers/gpio/gpiolib.c
++++ b/drivers/gpio/gpiolib.c
+@@ -43,6 +43,7 @@ struct gpio_desc {
+ /* flag symbols are bit numbers */
+ #define FLAG_REQUESTED	0
+ #define FLAG_IS_OUT	1
++#define FLAG_RESERVED	2
+ 
+ #ifdef CONFIG_DEBUG_FS
+ 	const char		*label;
+@@ -88,9 +89,10 @@ static int gpiochip_find_base(int ngpio)
+ 	int base = -ENOSPC;
+ 
+ 	for (i = ARCH_NR_GPIOS - 1; i >= 0 ; i--) {
+-		struct gpio_chip *chip = gpio_desc[i].chip;
++		struct gpio_desc *desc = &gpio_desc[i];
++		struct gpio_chip *chip = desc->chip;
+ 
+-		if (!chip) {
++		if (!chip && !test_bit(FLAG_RESERVED, &desc->flags)) {
+ 			spare++;
+ 			if (spare == ngpio) {
+ 				base = i;
+@@ -98,7 +100,8 @@ static int gpiochip_find_base(int ngpio)
+ 			}
+ 		} else {
+ 			spare = 0;
+-			i -= chip->ngpio - 1;
++			if (chip)
++				i -= chip->ngpio - 1;
+ 		}
+ 	}
+ 
+@@ -108,6 +111,47 @@ static int gpiochip_find_base(int ngpio)
+ }
+ 
+ /**
++ * gpiochip_reserve() - reserve range of gpios to use with platform code only
++ * @start: starting gpio number
++ * @ngpio: number of gpios to reserve
++ * Context: platform init, potentially before irqs or kmalloc will work
++ *
++ * Returns a negative errno if any gpio within the range is already reserved
++ * or registered, else returns zero as a success code.  Use this function
++ * to mark a range of gpios as unavailable for dynamic gpio number allocation,
++ * for example because its driver support is not yet loaded.
++ */
++int __init gpiochip_reserve(int start, int ngpio)
++{
++	int ret = 0;
++	unsigned long flags;
++	int i;
++
++	if (!gpio_is_valid(start) || !gpio_is_valid(start + ngpio))
++		return -EINVAL;
++
++	spin_lock_irqsave(&gpio_lock, flags);
++
++	for (i = start; i < start + ngpio; i++) {
++		struct gpio_desc *desc = &gpio_desc[i];
++
++		if (desc->chip || test_bit(FLAG_RESERVED, &desc->flags)) {
++			ret = -EBUSY;
++			goto err;
++		}
++
++		set_bit(FLAG_RESERVED, &desc->flags);
++	}
++
++	pr_debug("%s: reserved gpios from %d to %d\n",
++		 __func__, start, start + ngpio - 1);
++err:
++	spin_unlock_irqrestore(&gpio_lock, flags);
++
++	return ret;
++}
++
++/**
+  * gpiochip_add() - register a gpio_chip
+  * @chip: the chip to register, with chip->base initialized
+  * Context: potentially before irqs or kmalloc will work
+--- a/include/asm-generic/gpio.h
++++ b/include/asm-generic/gpio.h
+@@ -74,6 +74,7 @@ struct gpio_chip {
+ 
+ extern const char *gpiochip_is_requested(struct gpio_chip *chip,
+ 			unsigned offset);
++extern int __init __must_check gpiochip_reserve(int start, int ngpio);
+ 
+ /* add/remove chips */
+ extern int gpiochip_add(struct gpio_chip *chip);
diff --git a/target/linux/generic/patches-2.6.25/964-backport_gpiolib_fix_off_by_one_errors.patch b/target/linux/generic/patches-2.6.25/964-backport_gpiolib_fix_off_by_one_errors.patch
new file mode 100644
index 0000000000..c875a0d4ca
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/964-backport_gpiolib_fix_off_by_one_errors.patch
@@ -0,0 +1,46 @@
+From: Trent Piepho <xyzzy@speakeasy.org>
+Date: Fri, 23 May 2008 20:04:44 +0000 (-0700)
+Subject: gpiolib: fix off by one errors
+X-Git-Tag: v2.6.26-rc4~31
+X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Ftorvalds%2Flinux-2.6.git;a=commitdiff_plain;h=bff5fda972dc23bd1806a47c2098ae173585d013
+
+gpiolib: fix off by one errors
+
+The last gpio belonging to a chip is chip->base + chip->ngpios - 1.  Some
+places in the code, but not all, forgot the critical minus one.
+
+Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
+Acked-by: David Brownell <dbrownell@users.sourceforge.net>
+Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
+Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
+---
+
+--- a/drivers/gpio/gpiolib.c
++++ b/drivers/gpio/gpiolib.c
+@@ -127,7 +127,7 @@ int __init gpiochip_reserve(int start, i
+ 	unsigned long flags;
+ 	int i;
+ 
+-	if (!gpio_is_valid(start) || !gpio_is_valid(start + ngpio))
++	if (!gpio_is_valid(start) || !gpio_is_valid(start + ngpio - 1))
+ 		return -EINVAL;
+ 
+ 	spin_lock_irqsave(&gpio_lock, flags);
+@@ -170,7 +170,7 @@ int gpiochip_add(struct gpio_chip *chip)
+ 	unsigned	id;
+ 	int		base = chip->base;
+ 
+-	if ((!gpio_is_valid(base) || !gpio_is_valid(base + chip->ngpio))
++	if ((!gpio_is_valid(base) || !gpio_is_valid(base + chip->ngpio - 1))
+ 			&& base >= 0) {
+ 		status = -EINVAL;
+ 		goto fail;
+@@ -207,7 +207,7 @@ fail:
+ 	/* failures here can mean systems won't boot... */
+ 	if (status)
+ 		pr_err("gpiochip_add: gpios %d..%d (%s) not registered\n",
+-			chip->base, chip->base + chip->ngpio,
++			chip->base, chip->base + chip->ngpio - 1,
+ 			chip->label ? : "generic");
+ 	return status;
+ }
diff --git a/target/linux/generic/patches-2.6.25/971-ocf_20100325.patch b/target/linux/generic/patches-2.6.25/971-ocf_20100325.patch
new file mode 100644
index 0000000000..61be88ab84
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/971-ocf_20100325.patch
@@ -0,0 +1,170 @@
+--- a/drivers/char/random.c
++++ b/drivers/char/random.c
+@@ -129,6 +129,9 @@
+  *                                unsigned int value);
+  * 	void add_interrupt_randomness(int irq);
+  *
++ *      void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
++ *      int random_input_wait(void);
++ *
+  * add_input_randomness() uses the input layer interrupt timing, as well as
+  * the event type information from the hardware.
+  *
+@@ -140,6 +143,13 @@
+  * a better measure, since the timing of the disk interrupts are more
+  * unpredictable.
+  *
++ * random_input_words() just provides a raw block of entropy to the input
++ * pool, such as from a hardware entropy generator.
++ *
++ * random_input_wait() suspends the caller until such time as the
++ * entropy pool falls below the write threshold, and returns a count of how
++ * much entropy (in bits) is needed to sustain the pool.
++ *
+  * All of these routines try to estimate how many bits of randomness a
+  * particular randomness source.  They do this by keeping track of the
+  * first and second order deltas of the event timings.
+@@ -669,6 +679,61 @@ void add_disk_randomness(struct gendisk 
+ }
+ #endif
+ 
++/*
++ * random_input_words - add bulk entropy to pool
++ *
++ * @buf: buffer to add
++ * @wordcount: number of __u32 words to add
++ * @ent_count: total amount of entropy (in bits) to credit
++ *
++ * this provides bulk input of entropy to the input pool
++ *
++ */
++void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
++{
++	mix_pool_bytes(&input_pool, buf, wordcount*4);
++
++	credit_entropy_bits(&input_pool, ent_count);
++
++	DEBUG_ENT("crediting %d bits => %d\n",
++		  ent_count, input_pool.entropy_count);
++	/*
++	 * Wake up waiting processes if we have enough
++	 * entropy.
++	 */
++	if (input_pool.entropy_count >= random_read_wakeup_thresh)
++		wake_up_interruptible(&random_read_wait);
++}
++EXPORT_SYMBOL(random_input_words);
++
++/*
++ * random_input_wait - wait until random needs entropy
++ *
++ * this function sleeps until the /dev/random subsystem actually
++ * needs more entropy, and then return the amount of entropy
++ * that it would be nice to have added to the system.
++ */
++int random_input_wait(void)
++{
++	int count;
++
++	wait_event_interruptible(random_write_wait, 
++			 input_pool.entropy_count < random_write_wakeup_thresh);
++
++	count = random_write_wakeup_thresh - input_pool.entropy_count;
++
++        /* likely we got woken up due to a signal */
++	if (count <= 0) count = random_read_wakeup_thresh; 
++
++	DEBUG_ENT("requesting %d bits from input_wait()er %d<%d\n",
++		  count,
++		  input_pool.entropy_count, random_write_wakeup_thresh);
++
++	return count;
++}
++EXPORT_SYMBOL(random_input_wait);
++
++
+ #define EXTRACT_SIZE 10
+ 
+ /*********************************************************************
+--- a/fs/fcntl.c
++++ b/fs/fcntl.c
+@@ -136,6 +136,7 @@ static int dupfd(struct file *file, unsi
+ 
+ 	return fd;
+ }
++EXPORT_SYMBOL(sys_dup);
+ 
+ asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd)
+ {
+--- a/include/linux/miscdevice.h
++++ b/include/linux/miscdevice.h
+@@ -12,6 +12,7 @@
+ #define APOLLO_MOUSE_MINOR 7
+ #define PC110PAD_MINOR 9
+ /*#define ADB_MOUSE_MINOR 10	FIXME OBSOLETE */
++#define CRYPTODEV_MINOR		70
+ #define WATCHDOG_MINOR		130	/* Watchdog timer     */
+ #define TEMP_MINOR		131	/* Temperature Sensor */
+ #define RTC_MINOR 135
+--- a/include/linux/random.h
++++ b/include/linux/random.h
+@@ -8,6 +8,7 @@
+ #define _LINUX_RANDOM_H
+ 
+ #include <linux/ioctl.h>
++#include <linux/types.h> /* for __u32 in user space */
+ 
+ /* ioctl()'s for the random number generator */
+ 
+@@ -32,6 +33,30 @@
+ /* Clear the entropy pool and associated counters.  (Superuser only.) */
+ #define RNDCLEARPOOL	_IO( 'R', 0x06 )
+ 
++#ifdef CONFIG_FIPS_RNG
++
++/* Size of seed value - equal to AES blocksize */
++#define AES_BLOCK_SIZE_BYTES	16
++#define SEED_SIZE_BYTES			AES_BLOCK_SIZE_BYTES
++/* Size of AES key */
++#define KEY_SIZE_BYTES		16
++
++/* ioctl() structure used by FIPS 140-2 Tests */
++struct rand_fips_test {
++	unsigned char key[KEY_SIZE_BYTES];			/* Input */
++	unsigned char datetime[SEED_SIZE_BYTES];	/* Input */
++	unsigned char seed[SEED_SIZE_BYTES];		/* Input */
++	unsigned char result[SEED_SIZE_BYTES];		/* Output */
++};
++
++/* FIPS 140-2 RNG Variable Seed Test. (Superuser only.) */
++#define RNDFIPSVST	_IOWR('R', 0x10, struct rand_fips_test)
++
++/* FIPS 140-2 RNG Monte Carlo Test. (Superuser only.) */
++#define RNDFIPSMCT	_IOWR('R', 0x11, struct rand_fips_test)
++
++#endif /* #ifdef CONFIG_FIPS_RNG */
++
+ struct rand_pool_info {
+ 	int	entropy_count;
+ 	int	buf_size;
+@@ -48,6 +73,10 @@ extern void add_input_randomness(unsigne
+ 				 unsigned int value);
+ extern void add_interrupt_randomness(int irq);
+ 
++extern void random_input_words(__u32 *buf, size_t wordcount, int ent_count);
++extern int random_input_wait(void);
++#define HAS_RANDOM_INPUT_WAIT 1
++
+ extern void get_random_bytes(void *buf, int nbytes);
+ void generate_random_uuid(unsigned char uuid_out[16]);
+ 
+--- a/kernel/pid.c
++++ b/kernel/pid.c
+@@ -377,6 +377,7 @@ struct task_struct *find_task_by_pid_typ
+ {
+ 	return pid_task(find_pid_ns(nr, ns), type);
+ }
++EXPORT_SYMBOL(find_task_by_vpid);
+ 
+ EXPORT_SYMBOL(find_task_by_pid_type_ns);
+ 
diff --git a/target/linux/generic/patches-2.6.25/981-backport_usb_serial_sierrawireless_ids.patch b/target/linux/generic/patches-2.6.25/981-backport_usb_serial_sierrawireless_ids.patch
new file mode 100644
index 0000000000..d5bb40f3e9
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/981-backport_usb_serial_sierrawireless_ids.patch
@@ -0,0 +1,22 @@
+--- a/drivers/usb/serial/sierra.c
++++ b/drivers/usb/serial/sierra.c
+@@ -166,14 +166,19 @@ static struct usb_device_id id_table [] 
+ 	{ USB_DEVICE(0x1199, 0x6815) },	/* Sierra Wireless MC8775 */
+ 	{ USB_DEVICE(0x03f0, 0x1e1d) },	/* HP hs2300 a.k.a MC8775 */
+ 	{ USB_DEVICE(0x1199, 0x6820) },	/* Sierra Wireless AirCard 875 */
++	{ USB_DEVICE(0x1199, 0x6821) },	/* Sierra Wireless AirCard 875U */
+ 	{ USB_DEVICE(0x1199, 0x6832) },	/* Sierra Wireless MC8780*/
+ 	{ USB_DEVICE(0x1199, 0x6833) },	/* Sierra Wireless MC8781*/
++	{ USB_DEVICE(0x1199, 0x683B), .driver_info = DEVICE_1_PORT }, /* Sierra Wireless MC8785 Composite*/
++	{ USB_DEVICE(0x1199, 0x683C), .driver_info = DEVICE_1_PORT }, /* Sierra Wireless MC8790 Composite*/
+ 	{ USB_DEVICE(0x1199, 0x6850) },	/* Sierra Wireless AirCard 880 */
+ 	{ USB_DEVICE(0x1199, 0x6851) },	/* Sierra Wireless AirCard 881 */
+ 	{ USB_DEVICE(0x1199, 0x6852) },	/* Sierra Wireless AirCard 880 E */
+ 	{ USB_DEVICE(0x1199, 0x6853) },	/* Sierra Wireless AirCard 881 E */
+ 	{ USB_DEVICE(0x1199, 0x6855) },	/* Sierra Wireless AirCard 880 U */
+ 	{ USB_DEVICE(0x1199, 0x6856) },	/* Sierra Wireless AirCard 881 U */
++	{ USB_DEVICE(0x1199, 0x6859), .driver_info = DEVICE_1_PORT }, /* Sierra Wireless AirCard 885 E */
++	{ USB_DEVICE(0x1199, 0x685A), .driver_info = DEVICE_1_PORT }, /* Sierra Wireless AirCard 885 E */
+ 
+ 	{ USB_DEVICE(0x1199, 0x6468) }, /* Sierra Wireless MP3G - EVDO */
+ 	{ USB_DEVICE(0x1199, 0x6469) }, /* Sierra Wireless MP3G - UMTS/HSPA */
diff --git a/target/linux/generic/patches-2.6.25/999-use_preinit_as_init.patch b/target/linux/generic/patches-2.6.25/999-use_preinit_as_init.patch
new file mode 100644
index 0000000000..d61546d317
--- /dev/null
+++ b/target/linux/generic/patches-2.6.25/999-use_preinit_as_init.patch
@@ -0,0 +1,14 @@
+--- a/init/main.c
++++ b/init/main.c
+@@ -797,10 +797,7 @@ static int noinline init_post(void)
+ 		printk(KERN_WARNING "Failed to execute %s.  Attempting "
+ 					"defaults...\n", execute_command);
+ 	}
+-	run_init_process("/sbin/init");
+-	run_init_process("/etc/init");
+-	run_init_process("/bin/init");
+-	run_init_process("/bin/sh");
++	run_init_process("/etc/preinit");
+ 
+ 	panic("No init found.  Try passing init= option to kernel.");
+ }
diff --git a/target/linux/generic/patches-2.6.30/000-bzip_lzma_remove_nasty_hack.patch b/target/linux/generic/patches-2.6.30/000-bzip_lzma_remove_nasty_hack.patch
new file mode 100644
index 0000000000..33572b8905
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/000-bzip_lzma_remove_nasty_hack.patch
@@ -0,0 +1,113 @@
+From b1af4315d823a2b6659c5b14bc17f7bc61878ef4 Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Thu, 6 Aug 2009 15:09:31 -0700
+Subject: [PATCH] bzip2/lzma: remove nasty uncompressed size hack in pre-boot environment
+
+decompress_bunzip2 and decompress_unlzma have a nasty hack that subtracts
+4 from the input length if being called in the pre-boot environment.
+
+This is a nasty hack because it relies on the fact that flush = NULL only
+when called from the pre-boot environment (i.e.
+arch/x86/boot/compressed/misc.c).  initramfs.c/do_mounts_rd.c pass in a
+flush buffer (flush != NULL).
+
+This hack prevents the decompressors from being used with flush = NULL by
+other callers unless knowledge of the hack is propagated to them.
+
+This patch removes the hack by making decompress (called only from the
+pre-boot environment) a wrapper function that subtracts 4 from the input
+length before calling the decompressor.
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+Cc: "H. Peter Anvin" <hpa@zytor.com>
+Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
+Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
+---
+ lib/decompress_bunzip2.c |   22 ++++++++++++++++------
+ lib/decompress_unlzma.c  |   21 ++++++++++++++++-----
+ 2 files changed, 32 insertions(+), 11 deletions(-)
+
+--- a/lib/decompress_bunzip2.c
++++ b/lib/decompress_bunzip2.c
+@@ -45,9 +45,11 @@
+ */
+ 
+ 
+-#ifndef STATIC
++#ifdef STATIC
++#define PREBOOT
++#else
+ #include <linux/decompress/bunzip2.h>
+-#endif /* !STATIC */
++#endif /* STATIC */
+ 
+ #include <linux/decompress/mm.h>
+ #include <linux/slab.h>
+@@ -681,9 +683,7 @@ STATIC int INIT bunzip2(unsigned char *b
+ 	set_error_fn(error_fn);
+ 	if (flush)
+ 		outbuf = malloc(BZIP2_IOBUF_SIZE);
+-	else
+-		len -= 4; /* Uncompressed size hack active in pre-boot
+-			     environment */
++
+ 	if (!outbuf) {
+ 		error("Could not allocate output bufer");
+ 		return -1;
+@@ -733,4 +733,14 @@ exit_0:
+ 	return i;
+ }
+ 
+-#define decompress bunzip2
++#ifdef PREBOOT
++STATIC int INIT decompress(unsigned char *buf, int len,
++			int(*fill)(void*, unsigned int),
++			int(*flush)(void*, unsigned int),
++			unsigned char *outbuf,
++			int *pos,
++			void(*error_fn)(char *x))
++{
++	return bunzip2(buf, len - 4, fill, flush, outbuf, pos, error_fn);
++}
++#endif
+--- a/lib/decompress_unlzma.c
++++ b/lib/decompress_unlzma.c
+@@ -29,7 +29,9 @@
+  *Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+  */
+ 
+-#ifndef STATIC
++#ifdef STATIC
++#define PREBOOT
++#else
+ #include <linux/decompress/unlzma.h>
+ #endif /* STATIC */
+ 
+@@ -543,9 +545,7 @@ STATIC inline int INIT unlzma(unsigned c
+ 	int ret = -1;
+ 
+ 	set_error_fn(error_fn);
+-	if (!flush)
+-		in_len -= 4; /* Uncompressed size hack active in pre-boot
+-				environment */
++
+ 	if (buf)
+ 		inbuf = buf;
+ 	else
+@@ -645,4 +645,15 @@ exit_0:
+ 	return ret;
+ }
+ 
+-#define decompress unlzma
++#ifdef PREBOOT
++STATIC int INIT decompress(unsigned char *buf, int in_len,
++			      int(*fill)(void*, unsigned int),
++			      int(*flush)(void*, unsigned int),
++			      unsigned char *output,
++			      int *posp,
++			      void(*error_fn)(char *x)
++	)
++{
++	return unlzma(buf, in_len - 4, fill, flush, output, posp, error_fn);
++}
++#endif
diff --git a/target/linux/generic/patches-2.6.30/001-squashfs_move_zlib_decomp.patch b/target/linux/generic/patches-2.6.30/001-squashfs_move_zlib_decomp.patch
new file mode 100644
index 0000000000..94096791f1
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/001-squashfs_move_zlib_decomp.patch
@@ -0,0 +1,244 @@
+From 6c4419d997d4431bb62e73475cd6b084e83efbd1 Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Tue, 22 Sep 2009 19:25:24 +0100
+Subject: [PATCH] Squashfs: move zlib decompression wrapper code into a separate file
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/Makefile       |    2 +-
+ fs/squashfs/block.c        |   74 ++----------------------------
+ fs/squashfs/squashfs.h     |    4 ++
+ fs/squashfs/zlib_wrapper.c |  109 ++++++++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 118 insertions(+), 71 deletions(-)
+ create mode 100644 fs/squashfs/zlib_wrapper.c
+
+--- a/fs/squashfs/Makefile
++++ b/fs/squashfs/Makefile
+@@ -4,4 +4,4 @@
+ 
+ obj-$(CONFIG_SQUASHFS) += squashfs.o
+ squashfs-y += block.o cache.o dir.o export.o file.o fragment.o id.o inode.o
+-squashfs-y += namei.o super.o symlink.o
++squashfs-y += namei.o super.o symlink.o zlib_wrapper.o
+--- a/fs/squashfs/block.c
++++ b/fs/squashfs/block.c
+@@ -29,7 +29,6 @@
+ #include <linux/fs.h>
+ #include <linux/vfs.h>
+ #include <linux/slab.h>
+-#include <linux/mutex.h>
+ #include <linux/string.h>
+ #include <linux/buffer_head.h>
+ #include <linux/zlib.h>
+@@ -153,72 +152,10 @@ int squashfs_read_data(struct super_bloc
+ 	}
+ 
+ 	if (compressed) {
+-		int zlib_err = 0, zlib_init = 0;
+-
+-		/*
+-		 * Uncompress block.
+-		 */
+-
+-		mutex_lock(&msblk->read_data_mutex);
+-
+-		msblk->stream.avail_out = 0;
+-		msblk->stream.avail_in = 0;
+-
+-		bytes = length;
+-		do {
+-			if (msblk->stream.avail_in == 0 && k < b) {
+-				avail = min(bytes, msblk->devblksize - offset);
+-				bytes -= avail;
+-				wait_on_buffer(bh[k]);
+-				if (!buffer_uptodate(bh[k]))
+-					goto release_mutex;
+-
+-				if (avail == 0) {
+-					offset = 0;
+-					put_bh(bh[k++]);
+-					continue;
+-				}
+-
+-				msblk->stream.next_in = bh[k]->b_data + offset;
+-				msblk->stream.avail_in = avail;
+-				offset = 0;
+-			}
+-
+-			if (msblk->stream.avail_out == 0 && page < pages) {
+-				msblk->stream.next_out = buffer[page++];
+-				msblk->stream.avail_out = PAGE_CACHE_SIZE;
+-			}
+-
+-			if (!zlib_init) {
+-				zlib_err = zlib_inflateInit(&msblk->stream);
+-				if (zlib_err != Z_OK) {
+-					ERROR("zlib_inflateInit returned"
+-						" unexpected result 0x%x,"
+-						" srclength %d\n", zlib_err,
+-						srclength);
+-					goto release_mutex;
+-				}
+-				zlib_init = 1;
+-			}
+-
+-			zlib_err = zlib_inflate(&msblk->stream, Z_SYNC_FLUSH);
+-
+-			if (msblk->stream.avail_in == 0 && k < b)
+-				put_bh(bh[k++]);
+-		} while (zlib_err == Z_OK);
+-
+-		if (zlib_err != Z_STREAM_END) {
+-			ERROR("zlib_inflate error, data probably corrupt\n");
+-			goto release_mutex;
+-		}
+-
+-		zlib_err = zlib_inflateEnd(&msblk->stream);
+-		if (zlib_err != Z_OK) {
+-			ERROR("zlib_inflate error, data probably corrupt\n");
+-			goto release_mutex;
+-		}
+-		length = msblk->stream.total_out;
+-		mutex_unlock(&msblk->read_data_mutex);
++		length = zlib_uncompress(msblk, buffer, bh, b, offset, length,
++			srclength, pages);
++		if (length < 0)
++			goto read_failure;
+ 	} else {
+ 		/*
+ 		 * Block is uncompressed.
+@@ -255,9 +192,6 @@ int squashfs_read_data(struct super_bloc
+ 	kfree(bh);
+ 	return length;
+ 
+-release_mutex:
+-	mutex_unlock(&msblk->read_data_mutex);
+-
+ block_release:
+ 	for (; k < b; k++)
+ 		put_bh(bh[k]);
+--- a/fs/squashfs/squashfs.h
++++ b/fs/squashfs/squashfs.h
+@@ -70,6 +70,10 @@ extern struct inode *squashfs_iget(struc
+ 				unsigned int);
+ extern int squashfs_read_inode(struct inode *, long long);
+ 
++/* zlib_wrapper.c */
++extern int zlib_uncompress(struct squashfs_sb_info *, void **,
++				struct buffer_head **, int, int, int, int, int);
++
+ /*
+  * Inodes and files operations
+  */
+--- /dev/null
++++ b/fs/squashfs/zlib_wrapper.c
+@@ -0,0 +1,109 @@
++/*
++ * Squashfs - a compressed read only filesystem for Linux
++ *
++ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
++ * Phillip Lougher <phillip@lougher.demon.co.uk>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2,
++ * or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++ *
++ * zlib_wrapper.c
++ */
++
++
++#include <linux/mutex.h>
++#include <linux/buffer_head.h>
++#include <linux/zlib.h>
++
++#include "squashfs_fs.h"
++#include "squashfs_fs_sb.h"
++#include "squashfs_fs_i.h"
++#include "squashfs.h"
++
++int zlib_uncompress(struct squashfs_sb_info *msblk, void **buffer,
++	struct buffer_head **bh, int b, int offset, int length, int srclength,
++	int pages)
++{
++	int zlib_err = 0, zlib_init = 0;
++	int avail, bytes, k = 0, page = 0;
++
++	mutex_lock(&msblk->read_data_mutex);
++
++	msblk->stream.avail_out = 0;
++	msblk->stream.avail_in = 0;
++
++	bytes = length;
++	do {
++		if (msblk->stream.avail_in == 0 && k < b) {
++			avail = min(bytes, msblk->devblksize - offset);
++			bytes -= avail;
++			wait_on_buffer(bh[k]);
++			if (!buffer_uptodate(bh[k]))
++				goto release_mutex;
++
++			if (avail == 0) {
++				offset = 0;
++				put_bh(bh[k++]);
++				continue;
++			}
++
++			msblk->stream.next_in = bh[k]->b_data + offset;
++			msblk->stream.avail_in = avail;
++			offset = 0;
++		}
++
++		if (msblk->stream.avail_out == 0 && page < pages) {
++			msblk->stream.next_out = buffer[page++];
++			msblk->stream.avail_out = PAGE_CACHE_SIZE;
++		}
++
++		if (!zlib_init) {
++			zlib_err = zlib_inflateInit(&msblk->stream);
++			if (zlib_err != Z_OK) {
++				ERROR("zlib_inflateInit returned unexpected "
++					"result 0x%x, srclength %d\n",
++					zlib_err, srclength);
++				goto release_mutex;
++			}
++			zlib_init = 1;
++		}
++
++		zlib_err = zlib_inflate(&msblk->stream, Z_SYNC_FLUSH);
++
++		if (msblk->stream.avail_in == 0 && k < b)
++			put_bh(bh[k++]);
++	} while (zlib_err == Z_OK);
++
++	if (zlib_err != Z_STREAM_END) {
++		ERROR("zlib_inflate error, data probably corrupt\n");
++		goto release_mutex;
++	}
++
++	zlib_err = zlib_inflateEnd(&msblk->stream);
++	if (zlib_err != Z_OK) {
++		ERROR("zlib_inflate error, data probably corrupt\n");
++		goto release_mutex;
++	}
++
++	mutex_unlock(&msblk->read_data_mutex);
++	return msblk->stream.total_out;
++
++release_mutex:
++	mutex_unlock(&msblk->read_data_mutex);
++
++	for (; k < b; k++)
++		put_bh(bh[k]);
++
++	return -EIO;
++}
diff --git a/target/linux/generic/patches-2.6.30/002-squashfs_factor_out_remaining_zlib.patch b/target/linux/generic/patches-2.6.30/002-squashfs_factor_out_remaining_zlib.patch
new file mode 100644
index 0000000000..857834f21b
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/002-squashfs_factor_out_remaining_zlib.patch
@@ -0,0 +1,317 @@
+From 37c44e85fd49676ec15ccaeea065662c1fbcda7d Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Wed, 23 Sep 2009 19:04:49 +0100
+Subject: [PATCH] Squashfs: Factor out remaining zlib dependencies into separate wrapper file
+
+Move zlib buffer init/destroy code into separate wrapper file.  Also
+make zlib z_stream field a void * removing the need to include zlib.h
+for most files.
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/block.c          |    1 -
+ fs/squashfs/cache.c          |    1 -
+ fs/squashfs/dir.c            |    1 -
+ fs/squashfs/export.c         |    1 -
+ fs/squashfs/file.c           |    1 -
+ fs/squashfs/fragment.c       |    1 -
+ fs/squashfs/id.c             |    1 -
+ fs/squashfs/inode.c          |    1 -
+ fs/squashfs/namei.c          |    1 -
+ fs/squashfs/squashfs.h       |    2 +
+ fs/squashfs/squashfs_fs_sb.h |    2 +-
+ fs/squashfs/super.c          |   14 +++------
+ fs/squashfs/symlink.c        |    1 -
+ fs/squashfs/zlib_wrapper.c   |   56 ++++++++++++++++++++++++++++++++---------
+ 14 files changed, 51 insertions(+), 33 deletions(-)
+
+--- a/fs/squashfs/block.c
++++ b/fs/squashfs/block.c
+@@ -31,7 +31,6 @@
+ #include <linux/slab.h>
+ #include <linux/string.h>
+ #include <linux/buffer_head.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/cache.c
++++ b/fs/squashfs/cache.c
+@@ -51,7 +51,6 @@
+ #include <linux/sched.h>
+ #include <linux/spinlock.h>
+ #include <linux/wait.h>
+-#include <linux/zlib.h>
+ #include <linux/pagemap.h>
+ 
+ #include "squashfs_fs.h"
+--- a/fs/squashfs/dir.c
++++ b/fs/squashfs/dir.c
+@@ -30,7 +30,6 @@
+ #include <linux/fs.h>
+ #include <linux/vfs.h>
+ #include <linux/slab.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/export.c
++++ b/fs/squashfs/export.c
+@@ -39,7 +39,6 @@
+ #include <linux/vfs.h>
+ #include <linux/dcache.h>
+ #include <linux/exportfs.h>
+-#include <linux/zlib.h>
+ #include <linux/slab.h>
+ 
+ #include "squashfs_fs.h"
+--- a/fs/squashfs/file.c
++++ b/fs/squashfs/file.c
+@@ -47,7 +47,6 @@
+ #include <linux/string.h>
+ #include <linux/pagemap.h>
+ #include <linux/mutex.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/fragment.c
++++ b/fs/squashfs/fragment.c
+@@ -36,7 +36,6 @@
+ #include <linux/fs.h>
+ #include <linux/vfs.h>
+ #include <linux/slab.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/id.c
++++ b/fs/squashfs/id.c
+@@ -34,7 +34,6 @@
+ #include <linux/fs.h>
+ #include <linux/vfs.h>
+ #include <linux/slab.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/inode.c
++++ b/fs/squashfs/inode.c
+@@ -40,7 +40,6 @@
+ 
+ #include <linux/fs.h>
+ #include <linux/vfs.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/namei.c
++++ b/fs/squashfs/namei.c
+@@ -57,7 +57,6 @@
+ #include <linux/slab.h>
+ #include <linux/string.h>
+ #include <linux/dcache.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/squashfs.h
++++ b/fs/squashfs/squashfs.h
+@@ -71,6 +71,8 @@ extern struct inode *squashfs_iget(struc
+ extern int squashfs_read_inode(struct inode *, long long);
+ 
+ /* zlib_wrapper.c */
++extern void *zlib_init(void);
++extern void zlib_free(void *);
+ extern int zlib_uncompress(struct squashfs_sb_info *, void **,
+ 				struct buffer_head **, int, int, int, int, int);
+ 
+--- a/fs/squashfs/squashfs_fs_sb.h
++++ b/fs/squashfs/squashfs_fs_sb.h
+@@ -64,7 +64,7 @@ struct squashfs_sb_info {
+ 	struct mutex		read_data_mutex;
+ 	struct mutex		meta_index_mutex;
+ 	struct meta_index	*meta_index;
+-	z_stream		stream;
++	void			*stream;
+ 	__le64			*inode_lookup_table;
+ 	u64			inode_table;
+ 	u64			directory_table;
+--- a/fs/squashfs/super.c
++++ b/fs/squashfs/super.c
+@@ -34,7 +34,6 @@
+ #include <linux/pagemap.h>
+ #include <linux/init.h>
+ #include <linux/module.h>
+-#include <linux/zlib.h>
+ #include <linux/magic.h>
+ 
+ #include "squashfs_fs.h"
+@@ -86,12 +85,9 @@ static int squashfs_fill_super(struct su
+ 	}
+ 	msblk = sb->s_fs_info;
+ 
+-	msblk->stream.workspace = kmalloc(zlib_inflate_workspacesize(),
+-		GFP_KERNEL);
+-	if (msblk->stream.workspace == NULL) {
+-		ERROR("Failed to allocate zlib workspace\n");
++	msblk->stream = zlib_init();
++	if (msblk->stream == NULL)
+ 		goto failure;
+-	}
+ 
+ 	sblk = kzalloc(sizeof(*sblk), GFP_KERNEL);
+ 	if (sblk == NULL) {
+@@ -291,17 +287,17 @@ failed_mount:
+ 	squashfs_cache_delete(msblk->block_cache);
+ 	squashfs_cache_delete(msblk->fragment_cache);
+ 	squashfs_cache_delete(msblk->read_page);
++	zlib_free(msblk->stream);
+ 	kfree(msblk->inode_lookup_table);
+ 	kfree(msblk->fragment_index);
+ 	kfree(msblk->id_table);
+-	kfree(msblk->stream.workspace);
+ 	kfree(sb->s_fs_info);
+ 	sb->s_fs_info = NULL;
+ 	kfree(sblk);
+ 	return err;
+ 
+ failure:
+-	kfree(msblk->stream.workspace);
++	zlib_free(msblk->stream);
+ 	kfree(sb->s_fs_info);
+ 	sb->s_fs_info = NULL;
+ 	return -ENOMEM;
+@@ -343,10 +339,10 @@ static void squashfs_put_super(struct su
+ 		squashfs_cache_delete(sbi->block_cache);
+ 		squashfs_cache_delete(sbi->fragment_cache);
+ 		squashfs_cache_delete(sbi->read_page);
++		zlib_free(sbi->stream);
+ 		kfree(sbi->id_table);
+ 		kfree(sbi->fragment_index);
+ 		kfree(sbi->meta_index);
+-		kfree(sbi->stream.workspace);
+ 		kfree(sb->s_fs_info);
+ 		sb->s_fs_info = NULL;
+ 	}
+--- a/fs/squashfs/symlink.c
++++ b/fs/squashfs/symlink.c
+@@ -36,7 +36,6 @@
+ #include <linux/slab.h>
+ #include <linux/string.h>
+ #include <linux/pagemap.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/zlib_wrapper.c
++++ b/fs/squashfs/zlib_wrapper.c
+@@ -31,21 +31,51 @@
+ #include "squashfs_fs_i.h"
+ #include "squashfs.h"
+ 
++void *zlib_init()
++{
++	z_stream *stream = kmalloc(sizeof(z_stream), GFP_KERNEL);
++	if (stream == NULL)
++		goto failed;
++	stream->workspace = kmalloc(zlib_inflate_workspacesize(),
++		GFP_KERNEL);
++	if (stream->workspace == NULL)
++		goto failed;
++
++	return stream;
++
++failed:
++	ERROR("Failed to allocate zlib workspace\n");
++	kfree(stream);
++	return NULL;
++}
++
++
++void zlib_free(void *strm)
++{
++	z_stream *stream = strm;
++
++	if (stream)
++		kfree(stream->workspace);
++	kfree(stream);
++}
++
++
+ int zlib_uncompress(struct squashfs_sb_info *msblk, void **buffer,
+ 	struct buffer_head **bh, int b, int offset, int length, int srclength,
+ 	int pages)
+ {
+ 	int zlib_err = 0, zlib_init = 0;
+ 	int avail, bytes, k = 0, page = 0;
++	z_stream *stream = msblk->stream;
+ 
+ 	mutex_lock(&msblk->read_data_mutex);
+ 
+-	msblk->stream.avail_out = 0;
+-	msblk->stream.avail_in = 0;
++	stream->avail_out = 0;
++	stream->avail_in = 0;
+ 
+ 	bytes = length;
+ 	do {
+-		if (msblk->stream.avail_in == 0 && k < b) {
++		if (stream->avail_in == 0 && k < b) {
+ 			avail = min(bytes, msblk->devblksize - offset);
+ 			bytes -= avail;
+ 			wait_on_buffer(bh[k]);
+@@ -58,18 +88,18 @@ int zlib_uncompress(struct squashfs_sb_i
+ 				continue;
+ 			}
+ 
+-			msblk->stream.next_in = bh[k]->b_data + offset;
+-			msblk->stream.avail_in = avail;
++			stream->next_in = bh[k]->b_data + offset;
++			stream->avail_in = avail;
+ 			offset = 0;
+ 		}
+ 
+-		if (msblk->stream.avail_out == 0 && page < pages) {
+-			msblk->stream.next_out = buffer[page++];
+-			msblk->stream.avail_out = PAGE_CACHE_SIZE;
++		if (stream->avail_out == 0 && page < pages) {
++			stream->next_out = buffer[page++];
++			stream->avail_out = PAGE_CACHE_SIZE;
+ 		}
+ 
+ 		if (!zlib_init) {
+-			zlib_err = zlib_inflateInit(&msblk->stream);
++			zlib_err = zlib_inflateInit(stream);
+ 			if (zlib_err != Z_OK) {
+ 				ERROR("zlib_inflateInit returned unexpected "
+ 					"result 0x%x, srclength %d\n",
+@@ -79,9 +109,9 @@ int zlib_uncompress(struct squashfs_sb_i
+ 			zlib_init = 1;
+ 		}
+ 
+-		zlib_err = zlib_inflate(&msblk->stream, Z_SYNC_FLUSH);
++		zlib_err = zlib_inflate(stream, Z_SYNC_FLUSH);
+ 
+-		if (msblk->stream.avail_in == 0 && k < b)
++		if (stream->avail_in == 0 && k < b)
+ 			put_bh(bh[k++]);
+ 	} while (zlib_err == Z_OK);
+ 
+@@ -90,14 +120,14 @@ int zlib_uncompress(struct squashfs_sb_i
+ 		goto release_mutex;
+ 	}
+ 
+-	zlib_err = zlib_inflateEnd(&msblk->stream);
++	zlib_err = zlib_inflateEnd(stream);
+ 	if (zlib_err != Z_OK) {
+ 		ERROR("zlib_inflate error, data probably corrupt\n");
+ 		goto release_mutex;
+ 	}
+ 
+ 	mutex_unlock(&msblk->read_data_mutex);
+-	return msblk->stream.total_out;
++	return stream->total_out;
+ 
+ release_mutex:
+ 	mutex_unlock(&msblk->read_data_mutex);
diff --git a/target/linux/generic/patches-2.6.30/003-squashfs_add_decompressor_framework.patch b/target/linux/generic/patches-2.6.30/003-squashfs_add_decompressor_framework.patch
new file mode 100644
index 0000000000..db2fe538e5
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/003-squashfs_add_decompressor_framework.patch
@@ -0,0 +1,426 @@
+From 327fbf47a419befc6bff74f3ca42d2b6f0841903 Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Tue, 6 Oct 2009 04:04:15 +0100
+Subject: [PATCH] Squashfs: add a decompressor framework
+
+This adds a decompressor framework which allows multiple compression
+algorithms to be cleanly supported.
+
+Also update zlib wrapper and other code to use the new framework.
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/Makefile         |    2 +-
+ fs/squashfs/block.c          |    6 ++--
+ fs/squashfs/decompressor.c   |   58 ++++++++++++++++++++++++++++++++++++++++++
+ fs/squashfs/decompressor.h   |   55 +++++++++++++++++++++++++++++++++++++++
+ fs/squashfs/squashfs.h       |   14 +++++-----
+ fs/squashfs/squashfs_fs_sb.h |   41 +++++++++++++++--------------
+ fs/squashfs/super.c          |   45 ++++++++++++++++++-------------
+ fs/squashfs/zlib_wrapper.c   |   17 ++++++++++--
+ 8 files changed, 185 insertions(+), 53 deletions(-)
+ create mode 100644 fs/squashfs/decompressor.c
+ create mode 100644 fs/squashfs/decompressor.h
+
+--- a/fs/squashfs/Makefile
++++ b/fs/squashfs/Makefile
+@@ -4,4 +4,4 @@
+ 
+ obj-$(CONFIG_SQUASHFS) += squashfs.o
+ squashfs-y += block.o cache.o dir.o export.o file.o fragment.o id.o inode.o
+-squashfs-y += namei.o super.o symlink.o zlib_wrapper.o
++squashfs-y += namei.o super.o symlink.o zlib_wrapper.o decompressor.o
+--- a/fs/squashfs/block.c
++++ b/fs/squashfs/block.c
+@@ -36,7 +36,7 @@
+ #include "squashfs_fs_sb.h"
+ #include "squashfs_fs_i.h"
+ #include "squashfs.h"
+-
++#include "decompressor.h"
+ /*
+  * Read the metadata block length, this is stored in the first two
+  * bytes of the metadata block.
+@@ -151,8 +151,8 @@ int squashfs_read_data(struct super_bloc
+ 	}
+ 
+ 	if (compressed) {
+-		length = zlib_uncompress(msblk, buffer, bh, b, offset, length,
+-			srclength, pages);
++		length = squashfs_decompress(msblk, buffer, bh, b, offset,
++			length, srclength, pages);
+ 		if (length < 0)
+ 			goto read_failure;
+ 	} else {
+--- /dev/null
++++ b/fs/squashfs/decompressor.c
+@@ -0,0 +1,58 @@
++/*
++ * Squashfs - a compressed read only filesystem for Linux
++ *
++ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
++ * Phillip Lougher <phillip@lougher.demon.co.uk>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2,
++ * or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++ *
++ * decompressor.c
++ */
++
++#include <linux/types.h>
++#include <linux/mutex.h>
++#include <linux/buffer_head.h>
++
++#include "squashfs_fs.h"
++#include "squashfs_fs_sb.h"
++#include "squashfs_fs_i.h"
++#include "decompressor.h"
++#include "squashfs.h"
++
++/*
++ * This file (and decompressor.h) implements a decompressor framework for
++ * Squashfs, allowing multiple decompressors to be easily supported
++ */
++
++static const struct squashfs_decompressor squashfs_unknown_comp_ops = {
++	NULL, NULL, NULL, 0, "unknown", 0
++};
++
++static const struct squashfs_decompressor *decompressor[] = {
++	&squashfs_zlib_comp_ops,
++	&squashfs_unknown_comp_ops
++};
++
++
++const struct squashfs_decompressor *squashfs_lookup_decompressor(int id)
++{
++	int i;
++
++	for (i = 0; decompressor[i]->id; i++)
++		if (id == decompressor[i]->id)
++			break;
++
++	return decompressor[i];
++}
+--- /dev/null
++++ b/fs/squashfs/decompressor.h
+@@ -0,0 +1,55 @@
++#ifndef DECOMPRESSOR_H
++#define DECOMPRESSOR_H
++/*
++ * Squashfs - a compressed read only filesystem for Linux
++ *
++ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
++ * Phillip Lougher <phillip@lougher.demon.co.uk>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2,
++ * or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++ *
++ * decompressor.h
++ */
++
++struct squashfs_decompressor {
++	void	*(*init)(void);
++	void	(*free)(void *);
++	int	(*decompress)(struct squashfs_sb_info *, void **,
++		struct buffer_head **, int, int, int, int, int);
++	int	id;
++	char	*name;
++	int	supported;
++};
++
++static inline void *squashfs_decompressor_init(struct squashfs_sb_info *msblk)
++{
++	return msblk->decompressor->init();
++}
++
++static inline void squashfs_decompressor_free(struct squashfs_sb_info *msblk,
++	void *s)
++{
++	if (msblk->decompressor)
++		msblk->decompressor->free(s);
++}
++
++static inline int squashfs_decompress(struct squashfs_sb_info *msblk,
++	void **buffer, struct buffer_head **bh, int b, int offset, int length,
++	int srclength, int pages)
++{
++	return msblk->decompressor->decompress(msblk, buffer, bh, b, offset,
++		length, srclength, pages);
++}
++#endif
+--- a/fs/squashfs/squashfs.h
++++ b/fs/squashfs/squashfs.h
+@@ -51,6 +51,9 @@ extern struct squashfs_cache_entry *squa
+ 				u64, int);
+ extern int squashfs_read_table(struct super_block *, void *, u64, int);
+ 
++/* decompressor.c */
++extern const struct squashfs_decompressor *squashfs_lookup_decompressor(int);
++
+ /* export.c */
+ extern __le64 *squashfs_read_inode_lookup_table(struct super_block *, u64,
+ 				unsigned int);
+@@ -70,14 +73,8 @@ extern struct inode *squashfs_iget(struc
+ 				unsigned int);
+ extern int squashfs_read_inode(struct inode *, long long);
+ 
+-/* zlib_wrapper.c */
+-extern void *zlib_init(void);
+-extern void zlib_free(void *);
+-extern int zlib_uncompress(struct squashfs_sb_info *, void **,
+-				struct buffer_head **, int, int, int, int, int);
+-
+ /*
+- * Inodes and files operations
++ * Inodes, files and decompressor operations
+  */
+ 
+ /* dir.c */
+@@ -94,3 +91,6 @@ extern const struct inode_operations squ
+ 
+ /* symlink.c */
+ extern const struct address_space_operations squashfs_symlink_aops;
++
++/* zlib_wrapper.c */
++extern const struct squashfs_decompressor squashfs_zlib_comp_ops;
+--- a/fs/squashfs/squashfs_fs_sb.h
++++ b/fs/squashfs/squashfs_fs_sb.h
+@@ -52,25 +52,26 @@ struct squashfs_cache_entry {
+ };
+ 
+ struct squashfs_sb_info {
+-	int			devblksize;
+-	int			devblksize_log2;
+-	struct squashfs_cache	*block_cache;
+-	struct squashfs_cache	*fragment_cache;
+-	struct squashfs_cache	*read_page;
+-	int			next_meta_index;
+-	__le64			*id_table;
+-	__le64			*fragment_index;
+-	unsigned int		*fragment_index_2;
+-	struct mutex		read_data_mutex;
+-	struct mutex		meta_index_mutex;
+-	struct meta_index	*meta_index;
+-	void			*stream;
+-	__le64			*inode_lookup_table;
+-	u64			inode_table;
+-	u64			directory_table;
+-	unsigned int		block_size;
+-	unsigned short		block_log;
+-	long long		bytes_used;
+-	unsigned int		inodes;
++	const struct squashfs_decompressor	*decompressor;
++	int					devblksize;
++	int					devblksize_log2;
++	struct squashfs_cache			*block_cache;
++	struct squashfs_cache			*fragment_cache;
++	struct squashfs_cache			*read_page;
++	int					next_meta_index;
++	__le64					*id_table;
++	__le64					*fragment_index;
++	unsigned int				*fragment_index_2;
++	struct mutex				read_data_mutex;
++	struct mutex				meta_index_mutex;
++	struct meta_index			*meta_index;
++	void					*stream;
++	__le64					*inode_lookup_table;
++	u64					inode_table;
++	u64					directory_table;
++	unsigned int				block_size;
++	unsigned short				block_log;
++	long long				bytes_used;
++	unsigned int				inodes;
+ };
+ #endif
+--- a/fs/squashfs/super.c
++++ b/fs/squashfs/super.c
+@@ -40,27 +40,35 @@
+ #include "squashfs_fs_sb.h"
+ #include "squashfs_fs_i.h"
+ #include "squashfs.h"
++#include "decompressor.h"
+ 
+ static struct file_system_type squashfs_fs_type;
+ static struct super_operations squashfs_super_ops;
+ 
+-static int supported_squashfs_filesystem(short major, short minor, short comp)
++static const struct squashfs_decompressor *supported_squashfs_filesystem(short
++	major, short minor, short id)
+ {
++	const struct squashfs_decompressor *decompressor;
++
+ 	if (major < SQUASHFS_MAJOR) {
+ 		ERROR("Major/Minor mismatch, older Squashfs %d.%d "
+ 			"filesystems are unsupported\n", major, minor);
+-		return -EINVAL;
++		return NULL;
+ 	} else if (major > SQUASHFS_MAJOR || minor > SQUASHFS_MINOR) {
+ 		ERROR("Major/Minor mismatch, trying to mount newer "
+ 			"%d.%d filesystem\n", major, minor);
+ 		ERROR("Please update your kernel\n");
+-		return -EINVAL;
++		return NULL;
+ 	}
+ 
+-	if (comp != ZLIB_COMPRESSION)
+-		return -EINVAL;
++	decompressor = squashfs_lookup_decompressor(id);
++	if (!decompressor->supported) {
++		ERROR("Filesystem uses \"%s\" compression. This is not "
++			"supported\n", decompressor->name);
++		return NULL;
++	}
+ 
+-	return 0;
++	return decompressor;
+ }
+ 
+ 
+@@ -85,10 +93,6 @@ static int squashfs_fill_super(struct su
+ 	}
+ 	msblk = sb->s_fs_info;
+ 
+-	msblk->stream = zlib_init();
+-	if (msblk->stream == NULL)
+-		goto failure;
+-
+ 	sblk = kzalloc(sizeof(*sblk), GFP_KERNEL);
+ 	if (sblk == NULL) {
+ 		ERROR("Failed to allocate squashfs_super_block\n");
+@@ -115,25 +119,25 @@ static int squashfs_fill_super(struct su
+ 		goto failed_mount;
+ 	}
+ 
++	err = -EINVAL;
++
+ 	/* Check it is a SQUASHFS superblock */
+ 	sb->s_magic = le32_to_cpu(sblk->s_magic);
+ 	if (sb->s_magic != SQUASHFS_MAGIC) {
+ 		if (!silent)
+ 			ERROR("Can't find a SQUASHFS superblock on %s\n",
+ 						bdevname(sb->s_bdev, b));
+-		err = -EINVAL;
+ 		goto failed_mount;
+ 	}
+ 
+-	/* Check the MAJOR & MINOR versions and compression type */
+-	err = supported_squashfs_filesystem(le16_to_cpu(sblk->s_major),
++	/* Check the MAJOR & MINOR versions and lookup compression type */
++	msblk->decompressor = supported_squashfs_filesystem(
++			le16_to_cpu(sblk->s_major),
+ 			le16_to_cpu(sblk->s_minor),
+ 			le16_to_cpu(sblk->compression));
+-	if (err < 0)
++	if (msblk->decompressor == NULL)
+ 		goto failed_mount;
+ 
+-	err = -EINVAL;
+-
+ 	/*
+ 	 * Check if there's xattrs in the filesystem.  These are not
+ 	 * supported in this version, so warn that they will be ignored.
+@@ -200,6 +204,10 @@ static int squashfs_fill_super(struct su
+ 
+ 	err = -ENOMEM;
+ 
++	msblk->stream = squashfs_decompressor_init(msblk);
++	if (msblk->stream == NULL)
++		goto failed_mount;
++
+ 	msblk->block_cache = squashfs_cache_init("metadata",
+ 			SQUASHFS_CACHED_BLKS, SQUASHFS_METADATA_SIZE);
+ 	if (msblk->block_cache == NULL)
+@@ -287,7 +295,7 @@ failed_mount:
+ 	squashfs_cache_delete(msblk->block_cache);
+ 	squashfs_cache_delete(msblk->fragment_cache);
+ 	squashfs_cache_delete(msblk->read_page);
+-	zlib_free(msblk->stream);
++	squashfs_decompressor_free(msblk, msblk->stream);
+ 	kfree(msblk->inode_lookup_table);
+ 	kfree(msblk->fragment_index);
+ 	kfree(msblk->id_table);
+@@ -297,7 +305,6 @@ failed_mount:
+ 	return err;
+ 
+ failure:
+-	zlib_free(msblk->stream);
+ 	kfree(sb->s_fs_info);
+ 	sb->s_fs_info = NULL;
+ 	return -ENOMEM;
+@@ -339,7 +346,7 @@ static void squashfs_put_super(struct su
+ 		squashfs_cache_delete(sbi->block_cache);
+ 		squashfs_cache_delete(sbi->fragment_cache);
+ 		squashfs_cache_delete(sbi->read_page);
+-		zlib_free(sbi->stream);
++		squashfs_decompressor_free(sbi, sbi->stream);
+ 		kfree(sbi->id_table);
+ 		kfree(sbi->fragment_index);
+ 		kfree(sbi->meta_index);
+--- a/fs/squashfs/zlib_wrapper.c
++++ b/fs/squashfs/zlib_wrapper.c
+@@ -30,8 +30,9 @@
+ #include "squashfs_fs_sb.h"
+ #include "squashfs_fs_i.h"
+ #include "squashfs.h"
++#include "decompressor.h"
+ 
+-void *zlib_init()
++static void *zlib_init(void)
+ {
+ 	z_stream *stream = kmalloc(sizeof(z_stream), GFP_KERNEL);
+ 	if (stream == NULL)
+@@ -50,7 +51,7 @@ failed:
+ }
+ 
+ 
+-void zlib_free(void *strm)
++static void zlib_free(void *strm)
+ {
+ 	z_stream *stream = strm;
+ 
+@@ -60,7 +61,7 @@ void zlib_free(void *strm)
+ }
+ 
+ 
+-int zlib_uncompress(struct squashfs_sb_info *msblk, void **buffer,
++static int zlib_uncompress(struct squashfs_sb_info *msblk, void **buffer,
+ 	struct buffer_head **bh, int b, int offset, int length, int srclength,
+ 	int pages)
+ {
+@@ -137,3 +138,13 @@ release_mutex:
+ 
+ 	return -EIO;
+ }
++
++const struct squashfs_decompressor squashfs_zlib_comp_ops = {
++	.init = zlib_init,
++	.free = zlib_free,
++	.decompress = zlib_uncompress,
++	.id = ZLIB_COMPRESSION,
++	.name = "zlib",
++	.supported = 1
++};
++
diff --git a/target/linux/generic/patches-2.6.30/004-squashfs_add_decompressor_lzma_lzo.patch b/target/linux/generic/patches-2.6.30/004-squashfs_add_decompressor_lzma_lzo.patch
new file mode 100644
index 0000000000..a378c00058
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/004-squashfs_add_decompressor_lzma_lzo.patch
@@ -0,0 +1,54 @@
+From 1885ca0a1973944684f252094a703b7c80dfc974 Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Wed, 14 Oct 2009 03:58:11 +0100
+Subject: [PATCH] Squashfs: add decompressor entries for lzma and lzo
+
+Add knowledge of lzma/lzo compression formats to the decompressor
+framework.  For now these are added as unsupported.  Without
+these entries lzma/lzo compressed filesystems will be flagged as
+having unknown compression which is undesirable.
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/decompressor.c |   10 ++++++++++
+ fs/squashfs/squashfs_fs.h  |    4 +++-
+ 2 files changed, 13 insertions(+), 1 deletions(-)
+
+--- a/fs/squashfs/decompressor.c
++++ b/fs/squashfs/decompressor.c
+@@ -36,12 +36,22 @@
+  * Squashfs, allowing multiple decompressors to be easily supported
+  */
+ 
++static const struct squashfs_decompressor squashfs_lzma_unsupported_comp_ops = {
++	NULL, NULL, NULL, LZMA_COMPRESSION, "lzma", 0
++};
++
++static const struct squashfs_decompressor squashfs_lzo_unsupported_comp_ops = {
++	NULL, NULL, NULL, LZO_COMPRESSION, "lzo", 0
++};
++
+ static const struct squashfs_decompressor squashfs_unknown_comp_ops = {
+ 	NULL, NULL, NULL, 0, "unknown", 0
+ };
+ 
+ static const struct squashfs_decompressor *decompressor[] = {
+ 	&squashfs_zlib_comp_ops,
++	&squashfs_lzma_unsupported_comp_ops,
++	&squashfs_lzo_unsupported_comp_ops,
+ 	&squashfs_unknown_comp_ops
+ };
+ 
+--- a/fs/squashfs/squashfs_fs.h
++++ b/fs/squashfs/squashfs_fs.h
+@@ -211,7 +211,9 @@ struct meta_index {
+ /*
+  * definitions for structures on disk
+  */
+-#define ZLIB_COMPRESSION	 1
++#define ZLIB_COMPRESSION	1
++#define LZMA_COMPRESSION	2
++#define LZO_COMPRESSION		3
+ 
+ struct squashfs_super_block {
+ 	__le32			s_magic;
diff --git a/target/linux/generic/patches-2.6.30/005-squashfs_extra_parameter.patch b/target/linux/generic/patches-2.6.30/005-squashfs_extra_parameter.patch
new file mode 100644
index 0000000000..0991681346
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/005-squashfs_extra_parameter.patch
@@ -0,0 +1,42 @@
+From 5f393ede3ddb5dd4cc2a9f243182fac45f1ce10b Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Wed, 14 Oct 2009 04:07:54 +0100
+Subject: [PATCH] Squashfs: add an extra parameter to the decompressor init function
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/decompressor.h |    4 ++--
+ fs/squashfs/zlib_wrapper.c |    2 +-
+ 2 files changed, 3 insertions(+), 3 deletions(-)
+
+--- a/fs/squashfs/decompressor.h
++++ b/fs/squashfs/decompressor.h
+@@ -24,7 +24,7 @@
+  */
+ 
+ struct squashfs_decompressor {
+-	void	*(*init)(void);
++	void	*(*init)(struct squashfs_sb_info *);
+ 	void	(*free)(void *);
+ 	int	(*decompress)(struct squashfs_sb_info *, void **,
+ 		struct buffer_head **, int, int, int, int, int);
+@@ -35,7 +35,7 @@ struct squashfs_decompressor {
+ 
+ static inline void *squashfs_decompressor_init(struct squashfs_sb_info *msblk)
+ {
+-	return msblk->decompressor->init();
++	return msblk->decompressor->init(msblk);
+ }
+ 
+ static inline void squashfs_decompressor_free(struct squashfs_sb_info *msblk,
+--- a/fs/squashfs/zlib_wrapper.c
++++ b/fs/squashfs/zlib_wrapper.c
+@@ -32,7 +32,7 @@
+ #include "squashfs.h"
+ #include "decompressor.h"
+ 
+-static void *zlib_init(void)
++static void *zlib_init(struct squashfs_sb_info *dummy)
+ {
+ 	z_stream *stream = kmalloc(sizeof(z_stream), GFP_KERNEL);
+ 	if (stream == NULL)
diff --git a/target/linux/generic/patches-2.6.30/006-squashfs_add_lzma.patch b/target/linux/generic/patches-2.6.30/006-squashfs_add_lzma.patch
new file mode 100644
index 0000000000..9fd57970f2
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/006-squashfs_add_lzma.patch
@@ -0,0 +1,216 @@
+From f49e1efdd179d54e814ff2a8e8f469496583062c Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Tue, 20 Oct 2009 10:54:36 +0100
+Subject: [PATCH] Squashfs: add LZMA compression
+
+Add support for LZMA compressed filesystems.  This is an initial
+implementation.
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/Kconfig        |    5 ++
+ fs/squashfs/Makefile       |    1 +
+ fs/squashfs/decompressor.c |    4 +
+ fs/squashfs/lzma_wrapper.c |  151 ++++++++++++++++++++++++++++++++++++++++++++
+ fs/squashfs/squashfs.h     |    3 +
+ 5 files changed, 164 insertions(+), 0 deletions(-)
+ create mode 100644 fs/squashfs/lzma_wrapper.c
+
+--- a/fs/squashfs/Kconfig
++++ b/fs/squashfs/Kconfig
+@@ -26,6 +26,11 @@ config SQUASHFS
+ 
+ 	  If unsure, say N.
+ 
++config SQUASHFS_LZMA
++	bool "Include support for LZMA compressed file systems"
++	depends on SQUASHFS
++	select DECOMPRESS_LZMA
++
+ config SQUASHFS_EMBEDDED
+ 
+ 	bool "Additional option for memory-constrained systems" 
+--- a/fs/squashfs/Makefile
++++ b/fs/squashfs/Makefile
+@@ -5,3 +5,4 @@
+ obj-$(CONFIG_SQUASHFS) += squashfs.o
+ squashfs-y += block.o cache.o dir.o export.o file.o fragment.o id.o inode.o
+ squashfs-y += namei.o super.o symlink.o zlib_wrapper.o decompressor.o
++squashfs-$(CONFIG_SQUASHFS_LZMA) += lzma_wrapper.o
+--- a/fs/squashfs/decompressor.c
++++ b/fs/squashfs/decompressor.c
+@@ -50,7 +50,11 @@ static const struct squashfs_decompresso
+ 
+ static const struct squashfs_decompressor *decompressor[] = {
+ 	&squashfs_zlib_comp_ops,
++#ifdef CONFIG_SQUASHFS_LZMA
++	&squashfs_lzma_comp_ops,
++#else
+ 	&squashfs_lzma_unsupported_comp_ops,
++#endif
+ 	&squashfs_lzo_unsupported_comp_ops,
+ 	&squashfs_unknown_comp_ops
+ };
+--- /dev/null
++++ b/fs/squashfs/lzma_wrapper.c
+@@ -0,0 +1,151 @@
++/*
++ * Squashfs - a compressed read only filesystem for Linux
++ *
++ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
++ * Phillip Lougher <phillip@lougher.demon.co.uk>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2,
++ * or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++ *
++ * lzma_wrapper.c
++ */
++
++#include <asm/unaligned.h>
++#include <linux/buffer_head.h>
++#include <linux/mutex.h>
++#include <linux/vmalloc.h>
++#include <linux/decompress/unlzma.h>
++
++#include "squashfs_fs.h"
++#include "squashfs_fs_sb.h"
++#include "squashfs_fs_i.h"
++#include "squashfs.h"
++#include "decompressor.h"
++
++struct squashfs_lzma {
++	void	*input;
++	void	*output;
++};
++
++/* decompress_unlzma.c is currently non re-entrant... */
++DEFINE_MUTEX(lzma_mutex);
++
++/* decompress_unlzma.c doesn't provide any context in its callbacks... */
++static int lzma_error;
++
++static void error(char *m)
++{
++	ERROR("unlzma error: %s\n", m);
++	lzma_error = 1;
++}
++
++	
++static void *lzma_init(struct squashfs_sb_info *msblk)
++{
++	struct squashfs_lzma *stream = kzalloc(sizeof(*stream), GFP_KERNEL);
++	if (stream == NULL)
++		goto failed;
++	stream->input = vmalloc(msblk->block_size);
++	if (stream->input == NULL)
++		goto failed;
++	stream->output = vmalloc(msblk->block_size);
++	if (stream->output == NULL)
++		goto failed2;
++
++	return stream;
++
++failed2:
++	vfree(stream->input);
++failed:
++	ERROR("failed to allocate lzma workspace\n");
++	kfree(stream);
++	return NULL;
++}
++
++
++static void lzma_free(void *strm)
++{
++	struct squashfs_lzma *stream = strm;
++
++	if (stream) {
++		vfree(stream->input);
++		vfree(stream->output);
++	}
++	kfree(stream);
++}
++
++
++static int lzma_uncompress(struct squashfs_sb_info *msblk, void **buffer,
++	struct buffer_head **bh, int b, int offset, int length, int srclength,
++	int pages)
++{
++	struct squashfs_lzma *stream = msblk->stream;
++	void *buff = stream->input;
++	int avail, i, bytes = length, res;
++
++	mutex_lock(&lzma_mutex);
++
++	for (i = 0; i < b; i++) {
++		wait_on_buffer(bh[i]);
++		if (!buffer_uptodate(bh[i]))
++			goto block_release;
++
++		avail = min(bytes, msblk->devblksize - offset);
++		memcpy(buff, bh[i]->b_data + offset, avail);
++		buff += avail;
++		bytes -= avail;
++		offset = 0;
++		put_bh(bh[i]);
++	}
++
++	lzma_error = 0;
++	res = unlzma(stream->input, length, NULL, NULL, stream->output, NULL,
++							error);
++	if (res || lzma_error)
++		goto failed;
++
++	/* uncompressed size is stored in the LZMA header (5 byte offset) */
++	res = bytes = get_unaligned_le32(stream->input + 5);
++	for (i = 0, buff = stream->output; bytes && i < pages; i++) {
++		avail = min_t(int, bytes, PAGE_CACHE_SIZE);
++		memcpy(buffer[i], buff, avail);
++		buff += avail;
++		bytes -= avail;
++	}
++	if (bytes)
++		goto failed;
++
++	mutex_unlock(&lzma_mutex);
++	return res;
++
++block_release:
++	for (; i < b; i++)
++		put_bh(bh[i]);
++
++failed:
++	mutex_unlock(&lzma_mutex);
++
++	ERROR("lzma decompression failed, data probably corrupt\n");
++	return -EIO;
++}
++
++const struct squashfs_decompressor squashfs_lzma_comp_ops = {
++	.init = lzma_init,
++	.free = lzma_free,
++	.decompress = lzma_uncompress,
++	.id = LZMA_COMPRESSION,
++	.name = "lzma",
++	.supported = 1
++};
++
+--- a/fs/squashfs/squashfs.h
++++ b/fs/squashfs/squashfs.h
+@@ -94,3 +94,6 @@ extern const struct address_space_operat
+ 
+ /* zlib_wrapper.c */
+ extern const struct squashfs_decompressor squashfs_zlib_comp_ops;
++
++/* lzma wrapper.c */
++extern const struct squashfs_decompressor squashfs_lzma_comp_ops;
diff --git a/target/linux/generic/patches-2.6.30/007-squashfs_make_lzma_available.patch b/target/linux/generic/patches-2.6.30/007-squashfs_make_lzma_available.patch
new file mode 100644
index 0000000000..64705d2a94
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/007-squashfs_make_lzma_available.patch
@@ -0,0 +1,165 @@
+From fdf23ed283bc6ef5c25076ce2065f892120ff556 Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Thu, 22 Oct 2009 04:57:38 +0100
+Subject: [PATCH] Squashfs: Make unlzma available to non initramfs/initrd code
+
+Add a config option DECOMPRESS_LZMA_NEEDED which allows subsystems to
+specify they need the unlzma code.  Normally decompress_unlzma.c is
+compiled with __init and unlzma is not exported to modules.
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/Kconfig                   |    1 +
+ include/linux/decompress/bunzip2_mm.h |   12 ++++++++++++
+ include/linux/decompress/inflate_mm.h |   12 ++++++++++++
+ include/linux/decompress/mm.h         |    3 ---
+ include/linux/decompress/unlzma_mm.h  |   20 ++++++++++++++++++++
+ lib/Kconfig                           |    3 +++
+ lib/decompress_bunzip2.c              |    1 +
+ lib/decompress_inflate.c              |    1 +
+ lib/decompress_unlzma.c               |    5 ++++-
+ 9 files changed, 54 insertions(+), 4 deletions(-)
+ create mode 100644 include/linux/decompress/bunzip2_mm.h
+ create mode 100644 include/linux/decompress/inflate_mm.h
+ create mode 100644 include/linux/decompress/unlzma_mm.h
+
+--- a/fs/squashfs/Kconfig
++++ b/fs/squashfs/Kconfig
+@@ -30,6 +30,7 @@ config SQUASHFS_LZMA
+ 	bool "Include support for LZMA compressed file systems"
+ 	depends on SQUASHFS
+ 	select DECOMPRESS_LZMA
++	select DECOMPRESS_LZMA_NEEDED
+ 
+ config SQUASHFS_EMBEDDED
+ 
+--- /dev/null
++++ b/include/linux/decompress/bunzip2_mm.h
+@@ -0,0 +1,12 @@
++#ifndef BUNZIP2_MM_H
++#define BUNZIP2_MM_H
++
++#ifdef STATIC
++/* Code active when included from pre-boot environment: */
++#define INIT
++#else
++/* Compile for initramfs/initrd code only */
++#define INIT __init
++#endif
++
++#endif
+--- /dev/null
++++ b/include/linux/decompress/inflate_mm.h
+@@ -0,0 +1,12 @@
++#ifndef INFLATE_MM_H
++#define INFLATE_MM_H
++
++#ifdef STATIC
++/* Code active when included from pre-boot environment: */
++#define INIT
++#else
++/* Compile for initramfs/initrd code only */
++#define INIT __init
++#endif
++
++#endif
+--- a/include/linux/decompress/mm.h
++++ b/include/linux/decompress/mm.h
+@@ -53,8 +53,6 @@ static void free(void *where)
+ 
+ #define set_error_fn(x)
+ 
+-#define INIT
+-
+ #else /* STATIC */
+ 
+ /* Code active when compiled standalone for use when loading ramdisk: */
+@@ -77,7 +75,6 @@ static void free(void *where)
+ static void(*error)(char *m);
+ #define set_error_fn(x) error = x;
+ 
+-#define INIT __init
+ #define STATIC
+ 
+ #include <linux/init.h>
+--- /dev/null
++++ b/include/linux/decompress/unlzma_mm.h
+@@ -0,0 +1,20 @@
++#ifndef UNLZMA_MM_H
++#define UNLZMA_MM_H
++
++#ifdef STATIC
++
++/* Code active when included from pre-boot environment: */
++#define INIT
++
++#elif defined(CONFIG_DECOMPRESS_LZMA_NEEDED)
++
++/* Make it available to non initramfs/initrd code */
++#define INIT
++#include <linux/module.h>
++#else
++
++/* Compile for initramfs/initrd code only */
++#define INIT __init
++#endif
++
++#endif
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -114,6 +114,9 @@ config DECOMPRESS_BZIP2
+ config DECOMPRESS_LZMA
+ 	tristate
+ 
++config DECOMPRESS_LZMA_NEEDED
++	 boolean
++
+ #
+ # Generic allocator support is selected if needed
+ #
+--- a/lib/decompress_bunzip2.c
++++ b/lib/decompress_bunzip2.c
+@@ -51,6 +51,7 @@
+ #include <linux/decompress/bunzip2.h>
+ #endif /* STATIC */
+ 
++#include <linux/decompress/bunzip2_mm.h>
+ #include <linux/decompress/mm.h>
+ #include <linux/slab.h>
+ 
+--- a/lib/decompress_inflate.c
++++ b/lib/decompress_inflate.c
+@@ -22,6 +22,7 @@
+ 
+ #endif /* STATIC */
+ 
++#include <linux/decompress/inflate_mm.h>
+ #include <linux/decompress/mm.h>
+ #include <linux/slab.h>
+ 
+--- a/lib/decompress_unlzma.c
++++ b/lib/decompress_unlzma.c
+@@ -35,6 +35,7 @@
+ #include <linux/decompress/unlzma.h>
+ #endif /* STATIC */
+ 
++#include <linux/decompress/unlzma_mm.h>
+ #include <linux/decompress/mm.h>
+ #include <linux/slab.h>
+ 
+@@ -523,7 +524,7 @@ static inline void INIT process_bit1(str
+ 
+ 
+ 
+-STATIC inline int INIT unlzma(unsigned char *buf, int in_len,
++STATIC int INIT unlzma(unsigned char *buf, int in_len,
+ 			      int(*fill)(void*, unsigned int),
+ 			      int(*flush)(void*, unsigned int),
+ 			      unsigned char *output,
+@@ -656,4 +657,6 @@ STATIC int INIT decompress(unsigned char
+ {
+ 	return unlzma(buf, in_len - 4, fill, flush, output, posp, error_fn);
+ }
++#elif defined(CONFIG_DECOMPRESS_LZMA_NEEDED)
++EXPORT_SYMBOL(unlzma);
+ #endif
diff --git a/target/linux/generic/patches-2.6.30/011-mips_boot.patch b/target/linux/generic/patches-2.6.30/011-mips_boot.patch
new file mode 100644
index 0000000000..c2a043acde
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/011-mips_boot.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
+@@ -121,6 +121,8 @@
+ #endif
+ 	.endm
+ 
++	j kernel_entry
++	nop
+ #ifndef CONFIG_NO_EXCEPT_FILL
+ 	/*
+ 	 * Reserved space for exception handlers.
diff --git a/target/linux/generic/patches-2.6.30/012-extra_optimization.patch b/target/linux/generic/patches-2.6.30/012-extra_optimization.patch
new file mode 100644
index 0000000000..0b5174cbbd
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/012-extra_optimization.patch
@@ -0,0 +1,21 @@
+--- a/Makefile
++++ b/Makefile
+@@ -529,7 +529,7 @@ all: vmlinux
+ ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+ KBUILD_CFLAGS	+= -Os
+ else
+-KBUILD_CFLAGS	+= -O2
++KBUILD_CFLAGS	+= -O2 -fno-reorder-blocks -fno-tree-ch
+ endif
+ 
+ include $(srctree)/arch/$(SRCARCH)/Makefile
+@@ -567,6 +567,9 @@ endif
+ NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
+ CHECKFLAGS     += $(NOSTDINC_FLAGS)
+ 
++# improve gcc optimization
++CFLAGS += $(call cc-option,-funit-at-a-time,)
++
+ # warn about C99 declaration after statement
+ KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
+ 
diff --git a/target/linux/generic/patches-2.6.30/013-gcc4_inline_fix.patch b/target/linux/generic/patches-2.6.30/013-gcc4_inline_fix.patch
new file mode 100644
index 0000000000..642f11b21f
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/013-gcc4_inline_fix.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/include/asm/system.h
++++ b/arch/mips/include/asm/system.h
+@@ -187,7 +187,7 @@ extern __u64 __xchg_u64_unsupported_on_3
+    if something tries to do an invalid xchg().  */
+ extern void __xchg_called_with_bad_pointer(void);
+ 
+-static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
++static __always_inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+ {
+ 	switch (size) {
+ 	case 4:
diff --git a/target/linux/generic/patches-2.6.30/014-samsung_flash b/target/linux/generic/patches-2.6.30/014-samsung_flash
new file mode 100644
index 0000000000..5c835081b8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/014-samsung_flash
@@ -0,0 +1,36 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -51,6 +51,7 @@
+ #define SST49LF040B	        0x0050
+ #define SST49LF008A		0x005a
+ #define AT49BV6416		0x00d6
++#define MANUFACTURER_SAMSUNG	0x00ec
+ 
+ static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+@@ -386,12 +387,19 @@ struct mtd_info *cfi_cmdset_0002(struct 
+ 
+ 		if (extp->MajorVersion != '1' ||
+ 		    (extp->MinorVersion < '0' || extp->MinorVersion > '4')) {
+-			printk(KERN_ERR "  Unknown Amd/Fujitsu Extended Query "
+-			       "version %c.%c.\n",  extp->MajorVersion,
+-			       extp->MinorVersion);
+-			kfree(extp);
+-			kfree(mtd);
+-			return NULL;
++		        if (cfi->mfr == MANUFACTURER_SAMSUNG &&
++			    (extp->MajorVersion == '3' && extp->MinorVersion == '3')) {
++			    printk(KERN_NOTICE "  Newer Samsung flash detected, "
++			           "should be compatibile with Amd/Fujitsu.\n");
++		        }
++		        else {
++			    printk(KERN_ERR "  Unknown Amd/Fujitsu Extended Query "
++			           "version %c.%c.\n",  extp->MajorVersion,
++			           extp->MinorVersion);
++			    kfree(extp);
++			    kfree(mtd);
++			    return NULL;
++		        }
+ 		}
+ 
+ 		/* Install our own private info structure */
diff --git a/target/linux/generic/patches-2.6.30/015-arm_export___cpu_flush_dcache_page.patch b/target/linux/generic/patches-2.6.30/015-arm_export___cpu_flush_dcache_page.patch
new file mode 100644
index 0000000000..d778a1f7f6
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/015-arm_export___cpu_flush_dcache_page.patch
@@ -0,0 +1,28 @@
+From ba9b42e4ff5eb68f9c946378229d7e45299d7151 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk@dyn-67.arm.linux.org.uk>
+Date: Sun, 5 Jul 2009 10:50:37 +0100
+Subject: [PATCH] [ARM] export __cpu_flush_dcache_page
+
+Now required for libsas:
+
+  Kernel: arch/arm/boot/Image is ready
+  Kernel: arch/arm/boot/zImage is ready
+  Building modules, stage 2.
+  MODPOST 1096 modules
+ERROR: "xscale_flush_kern_dcache_page" [drivers/scsi/libsas/libsas.ko] undefined!
+
+Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
+---
+ arch/arm/mm/proc-syms.c |    1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+--- a/arch/arm/mm/proc-syms.c
++++ b/arch/arm/mm/proc-syms.c
+@@ -27,6 +27,7 @@ EXPORT_SYMBOL(__cpuc_flush_kern_all);
+ EXPORT_SYMBOL(__cpuc_flush_user_all);
+ EXPORT_SYMBOL(__cpuc_flush_user_range);
+ EXPORT_SYMBOL(__cpuc_coherent_kern_range);
++EXPORT_SYMBOL(__cpuc_flush_dcache_page);
+ EXPORT_SYMBOL(dmac_inv_range);  /* because of flush_ioremap_region() */
+ #else
+ EXPORT_SYMBOL(cpu_cache);
diff --git a/target/linux/generic/patches-2.6.30/020-mips_multi_machine_support.patch b/target/linux/generic/patches-2.6.30/020-mips_multi_machine_support.patch
new file mode 100644
index 0000000000..caabacc335
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/020-mips_multi_machine_support.patch
@@ -0,0 +1,173 @@
+--- /dev/null
++++ b/arch/mips/include/asm/mips_machine.h
+@@ -0,0 +1,47 @@
++/*
++ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ */
++
++#ifndef __ASM_MIPS_MACHINE_H
++#define __ASM_MIPS_MACHINE_H
++
++#include <linux/init.h>
++#include <linux/list.h>
++
++struct mips_machine {
++	unsigned long		mach_type;
++	void			(*mach_setup)(void);
++	char			*mach_name;
++	struct list_head	list;
++};
++
++void mips_machine_register(struct mips_machine *) __init;
++void mips_machine_setup(unsigned long machtype) __init;
++void mips_machine_set_name(char *name) __init;
++
++extern char *mips_machine_name;
++
++#define MIPS_MACHINE(_type, _name, _setup) 			\
++static char machine_name_##_type[] __initdata = _name;		\
++static struct mips_machine machine_##_type __initdata =		\
++{								\
++	.mach_type	= _type,				\
++	.mach_name	= machine_name_##_type,			\
++	.mach_setup	= _setup,				\
++};								\
++								\
++static int __init register_machine_##_type(void)		\
++{								\
++	mips_machine_register(&machine_##_type);		\
++	return 0;						\
++}								\
++								\
++pure_initcall(register_machine_##_type)
++
++#endif /* __ASM_MIPS_MACHINE_H */
++
+--- /dev/null
++++ b/arch/mips/kernel/mips_machine.c
+@@ -0,0 +1,74 @@
++/*
++ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ */
++#include <linux/mm.h>
++
++#include <asm/mips_machine.h>
++#include <asm/bootinfo.h>
++
++static struct list_head mips_machines __initdata =
++		LIST_HEAD_INIT(mips_machines);
++
++char *mips_machine_name = "Unknown";
++
++static struct mips_machine * __init mips_machine_find(unsigned long machtype)
++{
++	struct list_head *this;
++
++	list_for_each(this, &mips_machines) {
++		struct mips_machine *mach;
++
++		mach = list_entry(this, struct mips_machine, list);
++		if (mach->mach_type == machtype)
++			return mach;
++	}
++
++	return NULL;
++}
++
++void __init mips_machine_register(struct mips_machine *mach)
++{
++	list_add_tail(&mach->list, &mips_machines);
++}
++
++void __init mips_machine_set_name(char *name)
++{
++	unsigned int len;
++	char *p;
++
++	if (name == NULL)
++		return;
++
++	len = strlen(name);
++	p = kmalloc(len + 1, GFP_KERNEL);
++	if (p) {
++		strncpy(p, name, len);
++		p[len] = '\0';
++		mips_machine_name = p;
++	} else {
++		printk(KERN_WARNING "MIPS: no memory for machine_name\n");
++	}
++}
++
++void __init mips_machine_setup(unsigned long machtype)
++{
++	struct mips_machine *mach;
++
++	mach = mips_machine_find(machtype);
++	if (!mach) {
++		printk(KERN_ALERT "MIPS: no machine registered for "
++			"machtype %lu\n", machtype);
++		return;
++	}
++
++	mips_machine_set_name(mach->mach_name);
++	printk(KERN_INFO "MIPS: machine is %s\n", mips_machine_name);
++
++	if (mach->mach_setup)
++		mach->mach_setup();
++}
+--- a/arch/mips/kernel/Makefile
++++ b/arch/mips/kernel/Makefile
+@@ -85,6 +85,7 @@ obj-$(CONFIG_GPIO_TXX9)		+= gpio_txx9.o
+ 
+ obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
+ obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
++obj-$(CONFIG_MIPS_MACHINE)	+= mips_machine.o
+ 
+ CFLAGS_cpu-bugs64.o	= $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
+ 
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -803,6 +803,9 @@ config MIPS_DISABLE_OBSOLETE_IDE
+ config SYNC_R4K
+ 	bool
+ 
++config MIPS_MACHINE
++	def_bool n
++
+ config NO_IOPORT
+ 	def_bool n
+ 
+--- a/arch/mips/kernel/proc.c
++++ b/arch/mips/kernel/proc.c
+@@ -14,6 +14,7 @@
+ #include <asm/cpu-features.h>
+ #include <asm/mipsregs.h>
+ #include <asm/processor.h>
++#include <asm/mips_machine.h>
+ 
+ unsigned int vced_count, vcei_count;
+ 
+@@ -33,8 +34,12 @@ static int show_cpuinfo(struct seq_file 
+ 	/*
+ 	 * For the first processor also print the system type
+ 	 */
+-	if (n == 0)
++	if (n == 0) {
+ 		seq_printf(m, "system type\t\t: %s\n", get_system_type());
++#ifdef CONFIG_MIPS_MACHINE
++		seq_printf(m, "machine\t\t\t: %s\n", mips_machine_name);
++#endif
++	}
+ 
+ 	seq_printf(m, "processor\t\t: %ld\n", n);
+ 	sprintf(fmt, "cpu model\t\t: %%s V%%d.%%d%s\n",
diff --git a/target/linux/generic/patches-2.6.30/021-mips_image_cmdline_hack.patch b/target/linux/generic/patches-2.6.30/021-mips_image_cmdline_hack.patch
new file mode 100644
index 0000000000..7433686857
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/021-mips_image_cmdline_hack.patch
@@ -0,0 +1,28 @@
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -806,6 +806,10 @@ config SYNC_R4K
+ config MIPS_MACHINE
+ 	def_bool n
+ 
++config IMAGE_CMDLINE_HACK
++	bool "OpenWrt specific image command line hack"
++	default n
++
+ config NO_IOPORT
+ 	def_bool n
+ 
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
+@@ -143,6 +143,12 @@ FEXPORT(__kernel_entry)
+ 	j	kernel_entry
+ #endif
+ 
++#ifdef CONFIG_IMAGE_CMDLINE_HACK
++	.ascii	"CMDLINE:"
++EXPORT(__image_cmdline)
++	.fill	0x400
++#endif /* CONFIG_IMAGE_CMDLINE_HACK */
++
+ 	__REF
+ 
+ NESTED(kernel_entry, 16, sp)			# kernel entry point
diff --git a/target/linux/generic/patches-2.6.30/022-mips_use_generic_thread_info_allocator.patch b/target/linux/generic/patches-2.6.30/022-mips_use_generic_thread_info_allocator.patch
new file mode 100644
index 0000000000..80c34046a0
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/022-mips_use_generic_thread_info_allocator.patch
@@ -0,0 +1,18 @@
+--- a/arch/mips/include/asm/thread_info.h
++++ b/arch/mips/include/asm/thread_info.h
+@@ -85,6 +85,7 @@ register struct thread_info *__current_t
+ #define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER)
+ #define THREAD_MASK (THREAD_SIZE - 1UL)
+ 
++#if 0
+ #define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+ 
+ #ifdef CONFIG_DEBUG_STACK_USAGE
+@@ -101,6 +102,7 @@ register struct thread_info *__current_t
+ #endif
+ 
+ #define free_thread_info(info) kfree(info)
++#endif
+ 
+ #endif /* !__ASSEMBLY__ */
+ 
diff --git a/target/linux/generic/patches-2.6.30/023-mips-fix-kexec.patch b/target/linux/generic/patches-2.6.30/023-mips-fix-kexec.patch
new file mode 100644
index 0000000000..e6928dde91
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/023-mips-fix-kexec.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/kernel/machine_kexec.c
++++ b/arch/mips/kernel/machine_kexec.c
+@@ -52,7 +52,7 @@ machine_kexec(struct kimage *image)
+ 	reboot_code_buffer =
+ 	  (unsigned long)page_address(image->control_code_page);
+ 
+-	kexec_start_address = image->start;
++	kexec_start_address = (unsigned long) phys_to_virt(image->start);
+ 	kexec_indirection_page =
+ 		(unsigned long) phys_to_virt(image->head & PAGE_MASK);
+ 
diff --git a/target/linux/generic/patches-2.6.30/024-mips_delay.patch b/target/linux/generic/patches-2.6.30/024-mips_delay.patch
new file mode 100644
index 0000000000..128ed54ecb
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/024-mips_delay.patch
@@ -0,0 +1,27 @@
+From: Atsushi Nemoto <nemoto@toshiba-tops.co.jp>
+Subject: [PATCH] fix __ndelay build error and add 'ull' suffix for 32-bit kernel
+
+Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
+---
+ arch/mips/lib/delay.c |    4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/lib/delay.c
++++ b/arch/mips/lib/delay.c
+@@ -43,7 +43,7 @@ void __udelay(unsigned long us)
+ {
+ 	unsigned int lpj = current_cpu_data.udelay_val;
+ 
+-	__delay((us * 0x000010c7 * HZ * lpj) >> 32);
++	__delay((us * 0x000010c7ull * HZ * lpj) >> 32);
+ }
+ EXPORT_SYMBOL(__udelay);
+ 
+@@ -51,6 +51,6 @@ void __ndelay(unsigned long ns)
+ {
+ 	unsigned int lpj = current_cpu_data.udelay_val;
+ 
+-	__delay((us * 0x00000005 * HZ * lpj) >> 32);
++	__delay((ns * 0x00000005ull * HZ * lpj) >> 32);
+ }
+ EXPORT_SYMBOL(__ndelay);
diff --git a/target/linux/generic/patches-2.6.30/025-mips_disable_fpu.patch b/target/linux/generic/patches-2.6.30/025-mips_disable_fpu.patch
new file mode 100644
index 0000000000..47ff7073d5
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/025-mips_disable_fpu.patch
@@ -0,0 +1,155 @@
+MIPS: allow disabling the kernel FPU emulator
+
+This patch allows turning off the in-kernel Algorithmics
+FPU emulator support, which allows one to save a couple of
+precious blocks on an embedded system.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+--
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -791,6 +791,17 @@ config I8259
+ config MIPS_BONITO64
+ 	bool
+ 
++config MIPS_FPU_EMU
++	bool "Enable FPU emulation"
++	default y
++	help
++	   This option allows building a kernel with or without the Algorithmics
++	   FPU emulator enabled. Turning off this option results in a kernel which
++	   does not catch floating operations exceptions. Make sure that your toolchain
++	   is configured to enable software floating point emulation in that case.
++		
++	   If unsure say Y here.
++
+ config MIPS_MSC
+ 	bool
+ 
+--- a/arch/mips/math-emu/Makefile
++++ b/arch/mips/math-emu/Makefile
+@@ -2,12 +2,14 @@
+ # Makefile for the Linux/MIPS kernel FPU emulation.
+ #
+ 
+-obj-y	:= cp1emu.o ieee754m.o ieee754d.o ieee754dp.o ieee754sp.o ieee754.o \
++obj-y	:=	kernel_linkage.o dsemul.o cp1emu.o
++
++obj-$(CONFIG_MIPS_FPU_EMU)	+= ieee754m.o ieee754d.o ieee754dp.o ieee754sp.o ieee754.o \
+ 	   ieee754xcpt.o dp_frexp.o dp_modf.o dp_div.o dp_mul.o dp_sub.o \
+ 	   dp_add.o dp_fsp.o dp_cmp.o dp_logb.o dp_scalb.o dp_simple.o \
+ 	   dp_tint.o dp_fint.o dp_tlong.o dp_flong.o sp_frexp.o sp_modf.o \
+ 	   sp_div.o sp_mul.o sp_sub.o sp_add.o sp_fdp.o sp_cmp.o sp_logb.o \
+ 	   sp_scalb.o sp_simple.o sp_tint.o sp_fint.o sp_tlong.o sp_flong.o \
+-	   dp_sqrt.o sp_sqrt.o kernel_linkage.o dsemul.o
++	   dp_sqrt.o sp_sqrt.o
+ 
+ EXTRA_CFLAGS += -Werror
+--- a/arch/mips/math-emu/cp1emu.c
++++ b/arch/mips/math-emu/cp1emu.c
+@@ -56,6 +56,12 @@
+ #endif
+ #define __mips 4
+ 
++/* Further private data for which no space exists in mips_fpu_struct */
++
++struct mips_fpu_emulator_stats fpuemustats;
++
++#ifdef CONFIG_MIPS_FPU_EMU
++
+ /* Function which emulates a floating point instruction. */
+ 
+ static int fpu_emu(struct pt_regs *, struct mips_fpu_struct *,
+@@ -66,10 +72,6 @@ static int fpux_emu(struct pt_regs *,
+ 	struct mips_fpu_struct *, mips_instruction);
+ #endif
+ 
+-/* Further private data for which no space exists in mips_fpu_struct */
+-
+-struct mips_fpu_emulator_stats fpuemustats;
+-
+ /* Control registers */
+ 
+ #define FPCREG_RID	0	/* $0  = revision id */
+@@ -1273,6 +1275,13 @@ int fpu_emulator_cop1Handler(struct pt_r
+ 
+ 	return sig;
+ }
++#else
++int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
++        int has_fpu)
++{
++	return 0;
++}
++#endif /* CONFIG_MIPS_FPU_EMU */
+ 
+ #ifdef CONFIG_DEBUG_FS
+ extern struct dentry *mips_debugfs_dir;
+--- a/arch/mips/math-emu/dsemul.c
++++ b/arch/mips/math-emu/dsemul.c
+@@ -109,6 +109,7 @@ int mips_dsemul(struct pt_regs *regs, mi
+ 	return SIGILL;		/* force out of emulation loop */
+ }
+ 
++#ifdef CONFIG_MIPS_FPU_EMU
+ int do_dsemulret(struct pt_regs *xcp)
+ {
+ 	struct emuframe __user *fr;
+@@ -165,3 +166,9 @@ int do_dsemulret(struct pt_regs *xcp)
+ 
+ 	return 1;
+ }
++#else
++int do_dsemulret(struct pt_regs *xcp)
++{
++	return 0;
++}
++#endif /* CONFIG_MIPS_FPU_EMU */
+--- a/arch/mips/math-emu/kernel_linkage.c
++++ b/arch/mips/math-emu/kernel_linkage.c
+@@ -29,6 +29,7 @@
+ 
+ #define SIGNALLING_NAN 0x7ff800007ff80000LL
+ 
++#ifdef CONFIG_MIPS_FPU_EMU
+ void fpu_emulator_init_fpu(void)
+ {
+ 	static int first = 1;
+@@ -112,4 +113,36 @@ int fpu_emulator_restore_context32(struc
+ 
+ 	return err;
+ }
+-#endif
++#endif	/* CONFIG_64BIT */
++#else
++
++void fpu_emulator_init_fpu(void)
++{
++	printk(KERN_INFO "FPU emulator disabled, make sure your toolchain"
++		"was compiled with software floating point support (soft-float)\n");
++	return;
++}
++
++int fpu_emulator_save_context(struct sigcontext __user *sc)
++{
++	return 0;
++}
++
++int fpu_emulator_restore_context(struct sigcontext __user *sc)
++{
++	return 0;
++}
++
++int fpu_emulator_save_context32(struct sigcontext32 __user *sc)
++{
++	return 0;
++}
++
++int fpu_emulator_restore_context32(struct sigcontext32 __user *sc)
++{
++	return 0;
++}
++
++#ifdef CONFIG_64BIT
++#endif	/* CONFIG_64BIT */
++#endif /* CONFIG_MIPS_FPU_EMU */
diff --git a/target/linux/generic/patches-2.6.30/026-mips_fix_loading_of_modules_with_unresolved_weak_sy.patch b/target/linux/generic/patches-2.6.30/026-mips_fix_loading_of_modules_with_unresolved_weak_sy.patch
new file mode 100644
index 0000000000..20c6132e4f
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/026-mips_fix_loading_of_modules_with_unresolved_weak_sy.patch
@@ -0,0 +1,42 @@
+From 819b4bda18d62b52d04789c4a8d4fc3fbf9ce242 Mon Sep 17 00:00:00 2001
+From: Gabor Juhos <juhosg@openwrt.org>
+Date: Mon, 13 Jul 2009 10:46:49 +0200
+Subject: [PATCH] MIPS: fix loading of modules with unresolved weak symbols
+
+Loading of modules with unresolved weak symbols fails on MIPS
+since '88173507e4fc1e7ecd111b0565e8cba0cb7dae6d'.
+
+Modules: handle symbols that have a zero value
+
+The module subsystem cannot handle symbols that are zero.  If symbols
+are present that have a zero value then the module resolver prints out a
+message that these symbols are unresolved.
+
+We have to use IS_ERR_VALUE() to check that a symbol has been resolved
+or not.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/kernel/module.c |    4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/kernel/module.c
++++ b/arch/mips/kernel/module.c
+@@ -303,7 +303,7 @@ int apply_relocate(Elf_Shdr *sechdrs, co
+ 		/* This is the symbol it is referring to */
+ 		sym = (Elf_Sym *)sechdrs[symindex].sh_addr
+ 			+ ELF_MIPS_R_SYM(rel[i]);
+-		if (!sym->st_value) {
++		if (IS_ERR_VALUE(sym->st_value)) {
+ 			/* Ignore unresolved weak symbol */
+ 			if (ELF_ST_BIND(sym->st_info) == STB_WEAK)
+ 				continue;
+@@ -343,7 +343,7 @@ int apply_relocate_add(Elf_Shdr *sechdrs
+ 		/* This is the symbol it is referring to */
+ 		sym = (Elf_Sym *)sechdrs[symindex].sh_addr
+ 			+ ELF_MIPS_R_SYM(rel[i]);
+-		if (!sym->st_value) {
++		if (IS_ERR_VALUE(sym->st_value)) {
+ 			/* Ignore unresolved weak symbol */
+ 			if (ELF_ST_BIND(sym->st_info) == STB_WEAK)
+ 				continue;
diff --git a/target/linux/generic/patches-2.6.30/027-mips_module_reloc.patch b/target/linux/generic/patches-2.6.30/027-mips_module_reloc.patch
new file mode 100644
index 0000000000..019489f94e
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/027-mips_module_reloc.patch
@@ -0,0 +1,369 @@
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -83,7 +83,7 @@ all-$(CONFIG_BOOT_ELF64)	:= $(vmlinux-64
+ cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe
+ cflags-y			+= -msoft-float
+ LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
+-MODFLAGS			+= -mlong-calls
++MODFLAGS			+= -mno-long-calls
+ 
+ cflags-y += -ffreestanding
+ 
+--- a/arch/mips/include/asm/module.h
++++ b/arch/mips/include/asm/module.h
+@@ -9,6 +9,11 @@ struct mod_arch_specific {
+ 	struct list_head dbe_list;
+ 	const struct exception_table_entry *dbe_start;
+ 	const struct exception_table_entry *dbe_end;
++
++	void *phys_plt_tbl;
++	void *virt_plt_tbl;
++	unsigned int phys_plt_offset;
++	unsigned int virt_plt_offset;
+ };
+ 
+ typedef uint8_t Elf64_Byte;		/* Type for a 8-bit quantity.  */
+--- a/arch/mips/kernel/module.c
++++ b/arch/mips/kernel/module.c
+@@ -43,6 +43,116 @@ static struct mips_hi16 *mips_hi16_list;
+ static LIST_HEAD(dbe_list);
+ static DEFINE_SPINLOCK(dbe_lock);
+ 
++/*
++ * Get the potential max trampolines size required of the init and
++ * non-init sections. Only used if we cannot find enough contiguous
++ * physically mapped memory to put the module into.
++ */
++static unsigned int
++get_plt_size(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
++             const char *secstrings, unsigned int symindex, bool is_init)
++{
++	unsigned long ret = 0;
++	unsigned int i, j;
++	Elf_Sym *syms;
++
++	/* Everything marked ALLOC (this includes the exported symbols) */
++	for (i = 1; i < hdr->e_shnum; ++i) {
++		unsigned int info = sechdrs[i].sh_info;
++
++		if (sechdrs[i].sh_type != SHT_REL
++		    && sechdrs[i].sh_type != SHT_RELA)
++			continue;
++
++		/* Not a valid relocation section? */
++		if (info >= hdr->e_shnum)
++			continue;
++
++		/* Don't bother with non-allocated sections */
++		if (!(sechdrs[info].sh_flags & SHF_ALLOC))
++			continue;
++
++		/* If it's called *.init*, and we're not init, we're
++                   not interested */
++		if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0)
++		    != is_init)
++			continue;
++
++		syms = (Elf_Sym *) sechdrs[symindex].sh_addr;
++		if (sechdrs[i].sh_type == SHT_REL) {
++			Elf_Mips_Rel *rel = (void *) sechdrs[i].sh_addr;
++			unsigned int size = sechdrs[i].sh_size / sizeof(*rel);
++
++			for (j = 0; j < size; ++j) {
++				Elf_Sym *sym;
++
++				if (ELF_MIPS_R_TYPE(rel[j]) != R_MIPS_26)
++					continue;
++
++				sym = syms + ELF_MIPS_R_SYM(rel[j]);
++				if (!is_init && sym->st_shndx != SHN_UNDEF)
++					continue;
++
++				ret += 4 * sizeof(int);
++			}
++		} else {
++			Elf_Mips_Rela *rela = (void *) sechdrs[i].sh_addr;
++			unsigned int size = sechdrs[i].sh_size / sizeof(*rela);
++
++			for (j = 0; j < size; ++j) {
++				Elf_Sym *sym;
++
++				if (ELF_MIPS_R_TYPE(rela[j]) != R_MIPS_26)
++					continue;
++
++				sym = syms + ELF_MIPS_R_SYM(rela[j]);
++				if (!is_init && sym->st_shndx != SHN_UNDEF)
++					continue;
++
++				ret += 4 * sizeof(int);
++			}
++		}
++	}
++
++	return ret;
++}
++
++#ifndef MODULE_START
++static void *alloc_phys(unsigned long size)
++{
++	unsigned order;
++	struct page *page;
++	struct page *p;
++
++	size = PAGE_ALIGN(size);
++	order = get_order(size);
++
++	page = alloc_pages(GFP_KERNEL | __GFP_NORETRY | __GFP_NOWARN |
++			__GFP_THISNODE, order);
++	if (!page)
++		return NULL;
++
++	split_page(page, order);
++
++	for (p = page + (size >> PAGE_SHIFT); p < page + (1 << order); ++p)
++		__free_page(p);
++
++	return page_address(page);
++}
++#endif
++
++static void free_phys(void *ptr, unsigned long size)
++{
++	struct page *page;
++	struct page *end;
++
++	page = virt_to_page(ptr);
++	end = page + (PAGE_ALIGN(size) >> PAGE_SHIFT);
++
++	for (; page < end; ++page)
++		__free_page(page);
++}
++
+ void *module_alloc(unsigned long size)
+ {
+ #ifdef MODULE_START
+@@ -58,23 +168,101 @@ void *module_alloc(unsigned long size)
+ 
+ 	return __vmalloc_area(area, GFP_KERNEL, PAGE_KERNEL);
+ #else
++	void *ptr;
++
+ 	if (size == 0)
+ 		return NULL;
+-	return vmalloc(size);
++
++	ptr = alloc_phys(size);
++
++	/* If we failed to allocate physically contiguous memory,
++	 * fall back to regular vmalloc. The module loader code will
++	 * create jump tables to handle long jumps */
++	if (!ptr)
++		return vmalloc(size);
++
++	return ptr;
++#endif
++}
++
++static inline bool is_phys_addr(void *ptr)
++{
++#ifdef CONFIG_64BIT
++	return (KSEGX((unsigned long)ptr) == CKSEG0);
++#else
++	return (KSEGX(ptr) == KSEG0);
+ #endif
+ }
+ 
+ /* Free memory returned from module_alloc */
+ void module_free(struct module *mod, void *module_region)
+ {
+-	vfree(module_region);
++	if (is_phys_addr(module_region)) {
++		if (mod->module_init == module_region)
++			free_phys(module_region, mod->init_size);
++		else if (mod->module_core == module_region)
++			free_phys(module_region, mod->core_size);
++		else
++			BUG();
++	} else {
++		vfree(module_region);
++	}
+ 	/* FIXME: If module_region == mod->init_region, trim exception
+            table entries. */
+ }
+ 
++static void *__module_alloc(int size, bool phys)
++{
++	void *ptr;
++
++	if (phys)
++		ptr = kmalloc(size, GFP_KERNEL);
++	else
++		ptr = vmalloc(size);
++	return ptr;
++}
++
++static void __module_free(void *ptr)
++{
++	if (is_phys_addr(ptr))
++		kfree(ptr);
++	else
++		vfree(ptr);
++}
++
+ int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
+ 			      char *secstrings, struct module *mod)
+ {
++	unsigned int symindex = 0;
++	unsigned int core_size, init_size;
++	int i;
++
++	for (i = 1; i < hdr->e_shnum; i++)
++		if (sechdrs[i].sh_type == SHT_SYMTAB)
++			symindex = i;
++
++	core_size = get_plt_size(hdr, sechdrs, secstrings, symindex, false);
++	init_size = get_plt_size(hdr, sechdrs, secstrings, symindex, true);
++
++	mod->arch.phys_plt_offset = 0;
++	mod->arch.virt_plt_offset = 0;
++	mod->arch.phys_plt_tbl = NULL;
++	mod->arch.virt_plt_tbl = NULL;
++
++	if ((core_size + init_size) == 0)
++		return 0;
++
++	mod->arch.phys_plt_tbl = __module_alloc(core_size + init_size, 1);
++	if (!mod->arch.phys_plt_tbl)
++		return -ENOMEM;
++
++	mod->arch.virt_plt_tbl = __module_alloc(core_size + init_size, 0);
++	if (!mod->arch.virt_plt_tbl) {
++		__module_free(mod->arch.phys_plt_tbl);
++		mod->arch.phys_plt_tbl = NULL;
++		return -ENOMEM;
++	}
++
+ 	return 0;
+ }
+ 
+@@ -97,27 +285,37 @@ static int apply_r_mips_32_rela(struct m
+ 	return 0;
+ }
+ 
+-static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
++static Elf_Addr add_plt_entry_to(unsigned *plt_offset,
++				 void *start, Elf_Addr v)
+ {
+-	if (v % 4) {
+-		printk(KERN_ERR "module %s: dangerous relocation\n", me->name);
+-		return -ENOEXEC;
+-	}
++	unsigned *tramp = start + *plt_offset;
+ 
+-	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+-		printk(KERN_ERR
+-		       "module %s: relocation overflow\n",
+-		       me->name);
+-		return -ENOEXEC;
+-	}
++	*plt_offset += 4 * sizeof(int);
+ 
+-	*location = (*location & ~0x03ffffff) |
+-	            ((*location + (v >> 2)) & 0x03ffffff);
++	/* adjust carry for addiu */
++	if (v & 0x00008000)
++		v += 0x10000;
+ 
+-	return 0;
++	tramp[0] = 0x3c190000 | (v >> 16);      /* lui t9, hi16 */
++	tramp[1] = 0x27390000 | (v & 0xffff);   /* addiu t9, t9, lo16 */
++	tramp[2] = 0x03200008;                  /* jr t9 */
++	tramp[3] = 0x00000000;                  /* nop */
++
++	return (Elf_Addr) tramp;
+ }
+ 
+-static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v)
++static Elf_Addr add_plt_entry(struct module *me, void *location, Elf_Addr v)
++{
++	if (is_phys_addr(location))
++		return add_plt_entry_to(&me->arch.phys_plt_offset,
++				me->arch.phys_plt_tbl, v);
++	else
++		return add_plt_entry_to(&me->arch.virt_plt_offset,
++				me->arch.virt_plt_tbl, v);
++
++}
++
++static int set_r_mips_26(struct module *me, u32 *location, u32 ofs, Elf_Addr v)
+ {
+ 	if (v % 4) {
+ 		printk(KERN_ERR "module %s: dangerous relocation\n", me->name);
+@@ -125,17 +323,31 @@ static int apply_r_mips_26_rela(struct m
+ 	}
+ 
+ 	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+-		printk(KERN_ERR
++	    v = add_plt_entry(me, location, v + (ofs << 2));
++		if (!v) {
++			printk(KERN_ERR
+ 		       "module %s: relocation overflow\n",
+ 		       me->name);
+-		return -ENOEXEC;
++			return -ENOEXEC;
++		}
++		ofs = 0;
+ 	}
+ 
+-	*location = (*location & ~0x03ffffff) | ((v >> 2) & 0x03ffffff);
++	*location = (*location & ~0x03ffffff) | ((ofs + (v >> 2)) & 0x03ffffff);
+ 
+ 	return 0;
+ }
+ 
++static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
++{
++	return set_r_mips_26(me, location, *location & 0x03ffffff, v);
++}
++
++static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v)
++{
++	return set_r_mips_26(me, location, 0, v);
++}
++
+ static int apply_r_mips_hi16_rel(struct module *me, u32 *location, Elf_Addr v)
+ {
+ 	struct mips_hi16 *n;
+@@ -400,11 +612,32 @@ int module_finalize(const Elf_Ehdr *hdr,
+ 		list_add(&me->arch.dbe_list, &dbe_list);
+ 		spin_unlock_irq(&dbe_lock);
+ 	}
++
++	/* Get rid of the fixup trampoline if we're running the module
++	 * from physically mapped address space */
++	if (me->arch.phys_plt_offset == 0) {
++		__module_free(me->arch.phys_plt_tbl);
++		me->arch.phys_plt_tbl = NULL;
++	}
++	if (me->arch.virt_plt_offset == 0) {
++		__module_free(me->arch.virt_plt_tbl);
++		me->arch.virt_plt_tbl = NULL;
++	}
++
+ 	return 0;
+ }
+ 
+ void module_arch_cleanup(struct module *mod)
+ {
++	if (mod->arch.phys_plt_tbl) {
++		__module_free(mod->arch.phys_plt_tbl);
++		mod->arch.phys_plt_tbl = NULL;
++	}
++	if (mod->arch.virt_plt_tbl) {
++		__module_free(mod->arch.virt_plt_tbl);
++		mod->arch.virt_plt_tbl = NULL;
++	}
++
+ 	spin_lock_irq(&dbe_lock);
+ 	list_del(&mod->arch.dbe_list);
+ 	spin_unlock_irq(&dbe_lock);
diff --git a/target/linux/generic/patches-2.6.30/028-module_exports.patch b/target/linux/generic/patches-2.6.30/028-module_exports.patch
new file mode 100644
index 0000000000..725f3dce09
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/028-module_exports.patch
@@ -0,0 +1,196 @@
+--- a/include/asm-generic/vmlinux.lds.h
++++ b/include/asm-generic/vmlinux.lds.h
+@@ -4,6 +4,27 @@
+ #define LOAD_OFFSET 0
+ #endif
+ 
++#ifndef SYMTAB_KEEP_STR
++#define SYMTAB_KEEP_STR *(__ksymtab_strings.*)
++#define SYMTAB_DISCARD_STR
++#else
++#define SYMTAB_DISCARD_STR *(__ksymtab_strings.*)
++#endif
++
++#ifndef SYMTAB_KEEP
++#define SYMTAB_KEEP *(__ksymtab.*)
++#define SYMTAB_DISCARD
++#else
++#define SYMTAB_DISCARD *(__ksymtab.*)
++#endif
++
++#ifndef SYMTAB_KEEP_GPL
++#define SYMTAB_KEEP_GPL *(__ksymtab_gpl.*)
++#define SYMTAB_DISCARD_GPL
++#else
++#define SYMTAB_DISCARD_GPL *(__ksymtab_gpl.*)
++#endif
++
+ #ifndef VMLINUX_SYMBOL
+ #define VMLINUX_SYMBOL(_sym_) _sym_
+ #endif
+@@ -176,35 +197,35 @@
+ 	/* Kernel symbol table: Normal symbols */			\
+ 	__ksymtab         : AT(ADDR(__ksymtab) - LOAD_OFFSET) {		\
+ 		VMLINUX_SYMBOL(__start___ksymtab) = .;			\
+-		*(__ksymtab)						\
++		SYMTAB_KEEP						\
+ 		VMLINUX_SYMBOL(__stop___ksymtab) = .;			\
+ 	}								\
+ 									\
+ 	/* Kernel symbol table: GPL-only symbols */			\
+ 	__ksymtab_gpl     : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) {	\
+ 		VMLINUX_SYMBOL(__start___ksymtab_gpl) = .;		\
+-		*(__ksymtab_gpl)					\
++		SYMTAB_KEEP_GPL						\
+ 		VMLINUX_SYMBOL(__stop___ksymtab_gpl) = .;		\
+ 	}								\
+ 									\
+ 	/* Kernel symbol table: Normal unused symbols */		\
+ 	__ksymtab_unused  : AT(ADDR(__ksymtab_unused) - LOAD_OFFSET) {	\
+ 		VMLINUX_SYMBOL(__start___ksymtab_unused) = .;		\
+-		*(__ksymtab_unused)					\
++		*(__ksymtab_unused.*)					\
+ 		VMLINUX_SYMBOL(__stop___ksymtab_unused) = .;		\
+ 	}								\
+ 									\
+ 	/* Kernel symbol table: GPL-only unused symbols */		\
+ 	__ksymtab_unused_gpl : AT(ADDR(__ksymtab_unused_gpl) - LOAD_OFFSET) { \
+ 		VMLINUX_SYMBOL(__start___ksymtab_unused_gpl) = .;	\
+-		*(__ksymtab_unused_gpl)					\
++		*(__ksymtab_unused_gpl.*)				\
+ 		VMLINUX_SYMBOL(__stop___ksymtab_unused_gpl) = .;	\
+ 	}								\
+ 									\
+ 	/* Kernel symbol table: GPL-future-only symbols */		\
+ 	__ksymtab_gpl_future : AT(ADDR(__ksymtab_gpl_future) - LOAD_OFFSET) { \
+ 		VMLINUX_SYMBOL(__start___ksymtab_gpl_future) = .;	\
+-		*(__ksymtab_gpl_future)					\
++		*(__ksymtab_gpl_future.*)				\
+ 		VMLINUX_SYMBOL(__stop___ksymtab_gpl_future) = .;	\
+ 	}								\
+ 									\
+@@ -245,7 +266,13 @@
+ 									\
+ 	/* Kernel symbol table: strings */				\
+         __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) {	\
+-		*(__ksymtab_strings)					\
++		SYMTAB_KEEP_STR						\
++	}								\
++									\
++	/DISCARD/ : {							\
++		SYMTAB_DISCARD						\
++		SYMTAB_DISCARD_GPL					\
++		SYMTAB_DISCARD_STR					\
+ 	}								\
+ 									\
+ 	/* __*init sections */						\
+--- a/include/linux/module.h
++++ b/include/linux/module.h
+@@ -187,16 +187,24 @@ void *__symbol_get_gpl(const char *symbo
+ #define __CRC_SYMBOL(sym, sec)
+ #endif
+ 
++#ifdef MODULE
++#define __EXPORT_SUFFIX(sym)
++#else
++#define __EXPORT_SUFFIX(sym) "." #sym
++#endif
++
+ /* For every exported symbol, place a struct in the __ksymtab section */
+ #define __EXPORT_SYMBOL(sym, sec)				\
+ 	extern typeof(sym) sym;					\
+ 	__CRC_SYMBOL(sym, sec)					\
+ 	static const char __kstrtab_##sym[]			\
+-	__attribute__((section("__ksymtab_strings"), aligned(1))) \
++	__attribute__((section("__ksymtab_strings"		\
++	  __EXPORT_SUFFIX(sym)), aligned(1)))			\
+ 	= MODULE_SYMBOL_PREFIX #sym;                    	\
+ 	static const struct kernel_symbol __ksymtab_##sym	\
+ 	__used							\
+-	__attribute__((section("__ksymtab" sec), unused))	\
++	__attribute__((section("__ksymtab" sec			\
++	  __EXPORT_SUFFIX(sym)), unused))			\
+ 	= { (unsigned long)&sym, __kstrtab_##sym }
+ 
+ #define EXPORT_SYMBOL(sym)					\
+--- a/Makefile
++++ b/Makefile
+@@ -994,7 +994,7 @@ prepare: prepare0
+ # Leave this as default for preprocessing vmlinux.lds.S, which is now
+ # done in arch/$(ARCH)/kernel/Makefile
+ 
+-export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH)
++export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH) $(EXTRA_LDSFLAGS)
+ 
+ # The asm symlink changes when $(ARCH) changes.
+ # Detect this and ask user to run make mrproper
+--- a/arch/arm/kernel/vmlinux.lds.S
++++ b/arch/arm/kernel/vmlinux.lds.S
+@@ -78,18 +78,6 @@ SECTIONS
+ #endif
+ 	}
+ 
+-	/DISCARD/ : {			/* Exit code and data		*/
+-		EXIT_TEXT
+-		EXIT_DATA
+-		*(.exitcall.exit)
+-		*(.ARM.exidx.exit.text)
+-		*(.ARM.extab.exit.text)
+-#ifndef CONFIG_MMU
+-		*(.fixup)
+-		*(__ex_table)
+-#endif
+-	}
+-
+ 	.text : {			/* Real text segment		*/
+ 		_text = .;		/* Text and read-only data	*/
+ 			__exception_text_start = .;
+@@ -194,6 +182,20 @@ SECTIONS
+ 		*(COMMON)
+ 		_end = .;
+ 	}
++
++	/DISCARD/ : {			/* Exit code and data		*/
++		EXIT_TEXT
++		EXIT_DATA
++		*(.discard)
++		*(.exitcall.exit)
++		*(.ARM.exidx.exit.text)
++		*(.ARM.extab.exit.text)
++#ifndef CONFIG_MMU
++		*(.fixup)
++		*(__ex_table)
++#endif
++	}
++
+ 					/* Stabs debugging sections.	*/
+ 	.stab 0 : { *(.stab) }
+ 	.stabstr 0 : { *(.stabstr) }
+--- a/arch/powerpc/kernel/vmlinux.lds.S
++++ b/arch/powerpc/kernel/vmlinux.lds.S
+@@ -37,12 +37,6 @@ jiffies = jiffies_64 + 4;
+ #endif
+ SECTIONS
+ {
+-	/* Sections to be discarded. */
+-	/DISCARD/ : {
+-	*(.exitcall.exit)
+-	EXIT_DATA
+-	}
+-
+ 	. = KERNELBASE;
+ 
+ /*
+@@ -295,6 +289,12 @@ SECTIONS
+ 		__bss_stop = .;
+ 	}
+ 
++	/* Sections to be discarded. */
++	/DISCARD/ : {
++	*(.exitcall.exit)
++	EXIT_DATA
++	}
++
+ 	. = ALIGN(PAGE_SIZE);
+ 	_end = . ;
+ 	PROVIDE32 (end = .);
diff --git a/target/linux/generic/patches-2.6.30/029-mips_kexec.patch b/target/linux/generic/patches-2.6.30/029-mips_kexec.patch
new file mode 100644
index 0000000000..0eebacfa3f
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/029-mips_kexec.patch
@@ -0,0 +1,608 @@
+This patch updates kernel part of kexec for MIPS platform to support
+kdump, 64-bit, SMP and simplify code adaptation to new boards. It does
+the following:
+
+- hooks for machine-specific actions are introduced
+(_machine_kexec_prepare,
+  _machine_kexec_shutdown, _machine_crash_shutdown);
+- kexec reboot on SMP machine is implemented;
+- add boot parameters passing to new kernel (array kexec_args[] is
+copied to
+  registers a0-a3 on reboot );
+- crash dump functionality is added (boot kernel with non-default physical
+  start, parse "crashkernel=..." command line parameter, copy_oldmem_page()
+  is implemeted to read memory dump after reboot-on-crashi,
+crash_setup_regs()
+  is updated to correctly store registers on crash);
+
+kexec/kdump funtionality was tested on several Cavium Octeon boards
+(mips64 SMP). The way we do it was the following:
+- _machine_kexec_prepare was find kexec segment with command line and
+save it's pointed into internal bootloader structure.
+- _machine_kexec_shutdown was used to stop boards IO and make all non-boot
+CPUs spin in function relocated_kexec_smp_wait()
+- _machine_crash_shutdown just calls default_machine_crash_shutdown()
+We tested 1) 'common' kexec reboot (by 'kexec -e'), 2) kexec-on-panic
+('kexec -p ...') and 3) access to/proc/vmcore (with gdb).
+
+Signed-off-by: Maxim Syrchin <[11]msyrchin at ru.mvista.com>
+---
+arch/mips/Kconfig                  |   23 +++++++++
+arch/mips/Makefile                 |    4 ++
+arch/mips/kernel/Makefile          |    3 +-
+arch/mips/kernel/crash.c           |   91 ++++++++++++++++++++++++++++++++++
+arch/mips/kernel/crash_dump.c      |   96 ++++++++++++++++++++++++++++++++++++
+arch/mips/kernel/machine_kexec.c   |   52 ++++++++++++++++++-
+arch/mips/kernel/relocate_kernel.S |   93 ++++++++++++++++++++++++++++++++++-
+arch/mips/kernel/setup.c           |   10 +++-
+arch/mips/include/asm/kexec.h           |   21 ++++++++-
+9 files changed, 386 insertions(+), 7 deletions(-)
+create mode 100644 arch/mips/kernel/crash.c
+create mode 100644 arch/mips/kernel/crash_dump.c
+
+---
+ arch/mips/Kconfig                  |   23 	23 +	0 -	0 !
+ arch/mips/Makefile                 |    4 	4 +	0 -	0 !
+ arch/mips/kernel/Makefile          |    3 	2 +	1 -	0 !
+ arch/mips/kernel/crash.c           |   90 	90 +	0 -	0 !
+ arch/mips/kernel/crash_dump.c      |   96 	96 +	0 -	0 !
+ arch/mips/kernel/machine_kexec.c   |   66 	60 +	6 -	0 !
+ arch/mips/kernel/relocate_kernel.S |   96 	95 +	1 -	0 !
+ arch/mips/kernel/setup.c           |   10 	9 +	1 -	0 !
+ arch/mips/include/asm/kexec.h      |   21 	20 +	1 -	0 !
+ 9 files changed, 399 insertions(+), 10 deletions(-)
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -1966,6 +1966,29 @@ config KEXEC
+ 	  support.  As of this writing the exact hardware interface is
+ 	  strongly in flux, so no good recommendation can be made.
+ 
++config CRASH_DUMP
++    bool "kernel crash dumps (EXPERIMENTAL)"
++    depends on EXPERIMENTAL
++    help
++      Generate crash dump after being started by kexec.
++          This should be normally only set in special crash dump kernels
++      which are loaded in the main kernel with kexec-tools into
++      a specially reserved region and then later executed after
++      a crash by kdump/kexec. The crash dump kernel must be compiled
++          to a memory address not used by the main kernel or BIOS using
++          PHYSICAL_START.
++
++config PHYSICAL_START
++    hex "Physical address where the kernel is loaded"
++    default "0xffffffff84000000"
++    depends on CRASH_DUMP
++    help
++      This gives the CKSEG0 or KSEG0 address where the kernel is loaded.
++      If you plan to use kernel for capturing the crash dump change
++      this value to start of the reserved region (the "X" value as
++      specified in the "crashkernel=[12]YM at XM" command line boot parameter
++      passed to the panic-ed kernel).
++
+ config SECCOMP
+ 	bool "Enable seccomp to safely compute untrusted bytecode"
+ 	depends on PROC_FS
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -603,6 +603,10 @@ else
+ load-$(CONFIG_CPU_CAVIUM_OCTEON) 	+= 0xffffffff81100000
+ endif
+ 
++ifdef CONFIG_PHYSICAL_START
++load-y			= $(CONFIG_PHYSICAL_START)
++endif
++
+ cflags-y			+= -I$(srctree)/arch/mips/include/asm/mach-generic
+ drivers-$(CONFIG_PCI)		+= arch/mips/pci/
+ 
+--- a/arch/mips/kernel/Makefile
++++ b/arch/mips/kernel/Makefile
+@@ -83,7 +83,8 @@ obj-$(CONFIG_I8253)		+= i8253.o
+ 
+ obj-$(CONFIG_GPIO_TXX9)		+= gpio_txx9.o
+ 
+-obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
++obj-$(CONFIG_KEXEC)        += machine_kexec.o relocate_kernel.o crash.o
++obj-$(CONFIG_CRASH_DUMP)    += crash_dump.o
+ obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
+ obj-$(CONFIG_MIPS_MACHINE)	+= mips_machine.o
+ 
+--- /dev/null
++++ b/arch/mips/kernel/crash.c
+@@ -0,0 +1,90 @@
++/*
++ * Architecture specific (MIPS) functions for kexec based crash dumps.
++ *
++ * Copyright (C) 2005, IBM Corp.
++ * Copyright (C) 2008, MontaVista Software Inc.
++ *
++ * This source code is licensed under the GNU General Public License,
++ * Version 2.  See the file COPYING for more details.
++ *
++ */
++
++#undef DEBUG
++
++#include <linux/kernel.h>
++#include <linux/smp.h>
++#include <linux/reboot.h>
++#include <linux/kexec.h>
++#include <linux/bootmem.h>
++#include <linux/crash_dump.h>
++#include <linux/delay.h>
++#include <linux/init.h>
++#include <linux/irq.h>
++#include <linux/types.h>
++#include <linux/sched.h>
++
++
++
++/* This keeps a track of which one is crashing cpu. */
++int crashing_cpu = -1;
++static cpumask_t cpus_in_crash = CPU_MASK_NONE;
++
++#ifdef CONFIG_SMP
++
++void crash_shutdown_secondary(void *ignore)
++{
++    struct pt_regs* regs;
++    int cpu = smp_processor_id();
++
++    regs = task_pt_regs(current);
++    if (!cpu_online(cpu))
++        return;
++
++    local_irq_disable();
++    if (!cpu_isset(cpu, cpus_in_crash))
++        crash_save_cpu(regs, cpu);
++    cpu_set(cpu, cpus_in_crash);
++
++    while(!atomic_read(&kexec_ready_to_reboot)) {
++        cpu_relax();
++    }
++    relocated_kexec_smp_wait(NULL);
++    /* NOTREACHED */
++}
++
++static void crash_kexec_prepare_cpus(void)
++{
++    unsigned int msecs;
++
++    unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */
++
++    smp_call_function (crash_shutdown_secondary, NULL, 0);
++    smp_wmb();
++
++    /*
++     * FIXME: Until we will have the way to stop other CPUSs reliabally,
++     * the crash CPU will send an IPI and wait for other CPUs to
++     * respond.
++     * Delay of at least 10 seconds.
++     */
++    printk(KERN_EMERG "Sending IPI to other cpus...\n");
++    msecs = 10000;
++    while ((cpus_weight(cpus_in_crash) < ncpus) && (--msecs > 0)) {
++        cpu_relax();
++        mdelay(1);
++    }
++
++}
++
++#else
++static void crash_kexec_prepare_cpus(void) {}
++#endif
++
++void default_machine_crash_shutdown(struct pt_regs *regs)
++{
++    local_irq_disable();
++    crashing_cpu = smp_processor_id();
++    crash_save_cpu(regs, crashing_cpu);
++    crash_kexec_prepare_cpus();
++    cpu_set(crashing_cpu, cpus_in_crash);
++}
+--- /dev/null
++++ b/arch/mips/kernel/crash_dump.c
+@@ -0,0 +1,96 @@
++/*
++ * Routines for doing kexec-based kdump.
++ *
++ * Copyright (C) 2005, IBM Corp.
++ * Copyright (C) 2008, MontaVista Software Inc.
++ *
++ * This source code is licensed under the GNU General Public License,
++ * Version 2.  See the file COPYING for more details.
++ */
++
++#include <linux/highmem.h>
++#include <linux/bootmem.h>
++#include <linux/crash_dump.h>
++#include <asm/uaccess.h>
++
++#ifdef CONFIG_PROC_VMCORE
++static int __init parse_elfcorehdr(char *p)
++{
++    if (p)
++        elfcorehdr_addr = memparse(p, &p);
++    return 1;
++}
++__setup("elfcorehdr=", parse_elfcorehdr);
++#endif
++
++static int __init parse_savemaxmem(char *p)
++{
++    if (p)
++        saved_max_pfn = (memparse(p, &p) >> PAGE_SHIFT) - 1;
++
++    return 1;
++}
++__setup("savemaxmem=", parse_savemaxmem);
++
++
++static void *kdump_buf_page;
++
++/**
++ * copy_oldmem_page - copy one page from "oldmem"
++ * @pfn: page frame number to be copied
++ * @buf: target memory address for the copy; this can be in kernel address
++ *    space or user address space (see @userbuf)
++ * @csize: number of bytes to copy
++ * @offset: offset in bytes into the page (based on pfn) to begin the copy
++ * @userbuf: if set, @buf is in user address space, use copy_to_user(),
++ *    otherwise @buf is in kernel address space, use memcpy().
++ *
++ * Copy a page from "oldmem". For this page, there is no pte mapped
++ * in the current kernel.
++ *
++ * Calling copy_to_user() in atomic context is not desirable. Hence first
++ * copying the data to a pre-allocated kernel page and then copying to user
++ * space in non-atomic context.
++ */
++ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
++                               size_t csize, unsigned long offset, int userbuf)
++{
++    void  *vaddr;
++
++    if (!csize)
++        return 0;
++
++    vaddr = kmap_atomic_pfn(pfn, KM_PTE0);
++
++    if (!userbuf) {
++        memcpy(buf, (vaddr + offset), csize);
++        kunmap_atomic(vaddr, KM_PTE0);
++    } else {
++        if (!kdump_buf_page) {
++            printk(KERN_WARNING "Kdump: Kdump buffer page not"
++                " allocated\n");
++            return -EFAULT;
++        }
++        copy_page(kdump_buf_page, vaddr);
++        kunmap_atomic(vaddr, KM_PTE0);
++        if (copy_to_user(buf, (kdump_buf_page + offset), csize))
++            return -EFAULT;
++    }
++
++    return csize;
++}
++
++static int __init kdump_buf_page_init(void)
++{
++    int ret = 0;
++
++    kdump_buf_page = kmalloc(PAGE_SIZE, GFP_KERNEL);
++    if (!kdump_buf_page) {
++        printk(KERN_WARNING "Kdump: Failed to allocate kdump buffer"
++             " page\n");
++        ret = -ENOMEM;
++    }
++
++    return ret;
++}
++arch_initcall(kdump_buf_page_init);
+--- a/arch/mips/kernel/machine_kexec.c
++++ b/arch/mips/kernel/machine_kexec.c
+@@ -19,9 +19,25 @@ extern const size_t relocate_new_kernel_
+ extern unsigned long kexec_start_address;
+ extern unsigned long kexec_indirection_page;
+ 
++extern unsigned long fw_arg0, fw_arg1, fw_arg2, fw_arg3;
++
++int (*_machine_kexec_prepare)(struct kimage *) = NULL;
++void (*_machine_kexec_shutdown)(void) = NULL;
++void (*_machine_crash_shutdown)(struct pt_regs *regs) = NULL;
++#ifdef CONFIG_SMP
++void (*relocated_kexec_smp_wait) (void *);
++atomic_t kexec_ready_to_reboot = ATOMIC_INIT(0);
++#endif
++
+ int
+ machine_kexec_prepare(struct kimage *kimage)
+ {
++	kexec_args[0] = fw_arg0;
++	kexec_args[1] = fw_arg1;
++	kexec_args[2] = fw_arg2;
++	kexec_args[3] = fw_arg3;
++	if (_machine_kexec_prepare)
++        	return _machine_kexec_prepare(kimage);
+ 	return 0;
+ }
+ 
+@@ -33,13 +49,18 @@ machine_kexec_cleanup(struct kimage *kim
+ void
+ machine_shutdown(void)
+ {
++    if (_machine_kexec_shutdown)
++        _machine_kexec_shutdown();
+ }
+ 
+ void
+ machine_crash_shutdown(struct pt_regs *regs)
+ {
++    if (_machine_crash_shutdown)
++        _machine_crash_shutdown(regs);
++    else
++        default_machine_crash_shutdown(regs);
+ }
+-
+ typedef void (*noretfun_t)(void) __attribute__((noreturn));
+ 
+ void
+@@ -63,7 +84,7 @@ machine_kexec(struct kimage *image)
+ 	 * The generic kexec code builds a page list with physical
+ 	 * addresses. they are directly accessible through KSEG0 (or
+ 	 * CKSEG0 or XPHYS if on 64bit system), hence the
+-	 * pys_to_virt() call.
++     * phys_to_virt() call.
+ 	 */
+ 	for (ptr = &image->head; (entry = *ptr) && !(entry &IND_DONE);
+ 	     ptr = (entry & IND_INDIRECTION) ?
+@@ -78,8 +99,39 @@ machine_kexec(struct kimage *image)
+ 	 */
+ 	local_irq_disable();
+ 
+-	printk("Will call new kernel at %08lx\n", image->start);
+-	printk("Bye ...\n");
++	printk(KERN_EMERG "Will call new kernel at %08lx\n", image->start);
++	printk(KERN_EMERG "Bye ...\n");
+ 	__flush_cache_all();
+-	((noretfun_t) reboot_code_buffer)();
++#ifdef CONFIG_SMP
++    /* All secondary cpus now may jump to kexec_wait cycle */
++    relocated_kexec_smp_wait = (void *)(reboot_code_buffer +
++        (kexec_smp_wait - relocate_new_kernel));
++    smp_wmb();
++    atomic_set(&kexec_ready_to_reboot,1);
++#endif
++
++    	((noretfun_t) reboot_code_buffer)();
++	printk(KERN_EMERG "Bye ...\n");
++}
++
++/* crashkernel=[13]size at addr specifies the location to reserve for
++ * a crash kernel.  By reserving this memory we guarantee
++ * that linux never sets it up as a DMA target.
++ * Useful for holding code to do something appropriate
++ * after a kernel panic.
++ */
++static int __init parse_crashkernel_cmdline(char *arg)
++{
++    unsigned long size, base;
++    size = memparse(arg, &arg);
++    if (*arg == '@') {
++        base = memparse(arg+1, &arg);
++        /* FIXME: Do I want a sanity check
++         * to validate the memory range?
++         */
++        crashk_res.start = base;
++        crashk_res.end   = base + size - 1;
++    }
++    return 0;
+ }
++early_param("crashkernel", parse_crashkernel_cmdline);
+--- a/arch/mips/kernel/relocate_kernel.S
++++ b/arch/mips/kernel/relocate_kernel.S
+@@ -14,7 +14,13 @@
+ #include <asm/stackframe.h>
+ #include <asm/addrspace.h>
+ 
++
+ LEAF(relocate_new_kernel)
++     PTR_L a0,    arg0
++     PTR_L a1,    arg1
++     PTR_L a2,    arg2
++     PTR_L a3,    arg3
++
+ 	PTR_L		s0, kexec_indirection_page
+ 	PTR_L		s1, kexec_start_address
+ 
+@@ -26,7 +32,6 @@ process_entry:
+ 	and		s3, s2, 0x1
+ 	beq		s3, zero, 1f
+ 	and		s4, s2, ~0x1	/* store destination addr in s4 */
+-	move		a0, s4
+ 	b		process_entry
+ 
+ 1:
+@@ -40,6 +45,7 @@ process_entry:
+ 	/* done page */
+ 	and		s3, s2, 0x4
+ 	beq		s3, zero, 1f
++	nop
+ 	b		done
+ 1:
+ 	/* source page */
+@@ -56,14 +62,102 @@ copy_word:
+ 	PTR_ADD		s2, s2, SZREG
+ 	LONG_SUB	s6, s6, 1
+ 	beq		s6, zero, process_entry
++	nop
+ 	b		copy_word
++	nop
+ 	b		process_entry
+ 
+ done:
++#ifdef CONFIG_SMP
++    /* kexec_flag reset is signal to other CPUs what kernel
++        was moved to it's location. Note - we need relocated address
++        of kexec_flag.  */
++
++     bal        1f
++ 1:     move        t1,ra;
++     PTR_LA        t2,1b
++     PTR_LA        t0,kexec_flag
++     PTR_SUB        t0,t0,t2;
++     PTR_ADD        t0,t1,t0;
++     LONG_S        zero,(t0)
++#endif
++
++     /* Some platforms need I-cache to be flushed before
++     * jumping to new kernel.
++      */
++
+ 	/* jump to kexec_start_address */
+ 	j		s1
+ 	END(relocate_new_kernel)
+ 
++#ifdef CONFIG_SMP
++/*
++ * Other CPUs should wait until code is relocated and
++ * then start at entry point.
++ */
++LEAF(kexec_smp_wait)
++    PTR_L        a0, s_arg0
++    PTR_L        a1, s_arg1
++    PTR_L        a2, s_arg2
++    PTR_L        a3, s_arg3
++    PTR_L        s1, kexec_start_address
++
++    /* Non-relocated address works for args and kexec_start_address ( old
++     * kernel is not overwritten). But we need relocated address of
++     * kexec_flag.
++     */
++
++    bal        1f
++1:    move        t1,ra;
++    PTR_LA        t2,1b
++    PTR_LA        t0,kexec_flag
++    PTR_SUB        t0,t0,t2;
++    PTR_ADD        t0,t1,t0;
++
++1:    LONG_L        s0, (t0)
++    bne        s0, zero,1b
++
++    j        s1
++    END(kexec_smp_wait)
++#endif
++
++
++#ifdef __mips64
++       /* all PTR's must be aligned to 8 byte in 64-bit mode */
++       .align  3
++#endif
++
++/* All parameters to new kernel are passed in registers a0-a3.
++ * kexec_args[0..3] are uses to prepare register values.
++ */
++
++kexec_args:
++    EXPORT(kexec_args)
++arg0:    PTR        0x0
++arg1:    PTR        0x0
++arg2:    PTR        0x0
++arg3:    PTR        0x0
++    .size    kexec_args,PTRSIZE*4
++
++#ifdef CONFIG_SMP
++/*
++ * Secondary CPUs may have different kernel parameters in
++ * their registers a0-a3. secondary_kexec_args[0..3] are used
++ * to prepare register values.
++ */
++secondary_kexec_args:
++    EXPORT(secondary_kexec_args)
++s_arg0:    PTR        0x0
++s_arg1:    PTR        0x0
++s_arg2:    PTR        0x0
++s_arg3:    PTR        0x0
++    .size    secondary_kexec_args,PTRSIZE*4
++kexec_flag:
++    LONG        0x1
++
++#endif
++
++
+ kexec_start_address:
+ 	EXPORT(kexec_start_address)
+ 	PTR		0x0
+--- a/arch/mips/kernel/setup.c
++++ b/arch/mips/kernel/setup.c
+@@ -21,7 +21,7 @@
+ #include <linux/console.h>
+ #include <linux/pfn.h>
+ #include <linux/debugfs.h>
+-
++#include <linux/kexec.h>
+ #include <asm/addrspace.h>
+ #include <asm/bootinfo.h>
+ #include <asm/bugs.h>
+@@ -489,6 +489,11 @@ static void __init arch_mem_init(char **
+ 	}
+ 
+ 	bootmem_init();
++#ifdef CONFIG_CRASH_DUMP
++    if (crashk_res.start != crashk_res.end)
++        reserve_bootmem(crashk_res.start,
++                crashk_res.end - crashk_res.start + 1);
++#endif
+ 	sparse_init();
+ 	paging_init();
+ }
+@@ -543,6 +548,9 @@ static void __init resource_init(void)
+ 		 */
+ 		request_resource(res, &code_resource);
+ 		request_resource(res, &data_resource);
++#ifdef CONFIG_KEXEC
++        request_resource(res, &crashk_res);
++#endif
+ 	}
+ }
+ 
+--- a/arch/mips/include/asm/kexec.h
++++ b/arch/mips/include/asm/kexec.h
+@@ -9,6 +9,8 @@
+ #ifndef _MIPS_KEXEC
+ # define _MIPS_KEXEC
+ 
++#include <asm/stacktrace.h>
++
+ /* Maximum physical address we can use pages from */
+ #define KEXEC_SOURCE_MEMORY_LIMIT (0x20000000)
+ /* Maximum address we can reach in physical address mode */
+@@ -24,7 +26,24 @@
+ static inline void crash_setup_regs(struct pt_regs *newregs,
+ 				    struct pt_regs *oldregs)
+ {
+-	/* Dummy implementation for now */
++    if (oldregs)
++        memcpy(newregs, oldregs, sizeof(*newregs));
++    else
++        prepare_frametrace(newregs);
+ }
+ 
++#ifdef CONFIG_KEXEC
++struct kimage;
++extern unsigned long kexec_args[4];
++extern int (*_machine_kexec_prepare)(struct kimage *);
++extern void (*_machine_kexec_shutdown)(void);
++extern void (*_machine_crash_shutdown)(struct pt_regs *regs);
++extern void default_machine_crash_shutdown(struct pt_regs *regs);
++#ifdef CONFIG_SMP
++extern const unsigned char kexec_smp_wait[];
++extern unsigned long secondary_kexec_args[4];
++extern void (*relocated_kexec_smp_wait) (void *);
++extern atomic_t kexec_ready_to_reboot;
++#endif
++#endif
+ #endif /* !_MIPS_KEXEC */
diff --git a/target/linux/generic/patches-2.6.30/030-pci_disable_common_quirks.patch b/target/linux/generic/patches-2.6.30/030-pci_disable_common_quirks.patch
new file mode 100644
index 0000000000..de1a424035
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/030-pci_disable_common_quirks.patch
@@ -0,0 +1,43 @@
+--- a/drivers/pci/Kconfig
++++ b/drivers/pci/Kconfig
+@@ -51,6 +51,12 @@ config PCI_STUB
+ 
+ 	  When in doubt, say N.
+ 
++config PCI_DISABLE_COMMON_QUIRKS
++	bool "PCI disable common quirks"
++	depends on PCI
++	help
++	  If you don't know what to do here, say N.
++
+ config HT_IRQ
+ 	bool "Interrupts on hypertransport devices"
+ 	default y
+--- a/drivers/pci/quirks.c
++++ b/drivers/pci/quirks.c
+@@ -98,6 +98,7 @@ static void __devinit quirk_resource_ali
+ }
+ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_resource_alignment);
+ 
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
+ /* The Mellanox Tavor device gives false positive parity errors
+  * Mark this device with a broken_parity_status, to allow
+  * PCI scanning code to "skip" this now blacklisted device.
+@@ -1860,7 +1861,9 @@ static void __devinit fixup_rev1_53c810(
+ 	}
+ }
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
++#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
+ 
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
+ /* Enable 1k I/O space granularity on the Intel P64H2 */
+ static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
+ {
+@@ -2466,6 +2469,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10e7, quirk_i82576_sriov);
+ 
+ #endif	/* CONFIG_PCI_IOV */
++#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
+ 
+ static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
+ 			  struct pci_fixup *end)
diff --git a/target/linux/generic/patches-2.6.30/031-arm_module_unresolved_weak_sym.patch b/target/linux/generic/patches-2.6.30/031-arm_module_unresolved_weak_sym.patch
new file mode 100644
index 0000000000..42d2dbd202
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/031-arm_module_unresolved_weak_sym.patch
@@ -0,0 +1,13 @@
+--- a/arch/arm/kernel/module.c
++++ b/arch/arm/kernel/module.c
+@@ -120,6 +120,10 @@ apply_relocate(Elf32_Shdr *sechdrs, cons
+ 			return -ENOEXEC;
+ 		}
+ 
++		if ((IS_ERR_VALUE(sym->st_value) || !sym->st_value) &&
++		    ELF_ST_BIND(sym->st_info) == STB_WEAK)
++			continue;
++
+ 		loc = dstsec->sh_addr + rel->r_offset;
+ 
+ 		switch (ELF32_R_TYPE(rel->r_info)) {
diff --git a/target/linux/generic/patches-2.6.30/032-ppc_gcc_build_fix.patch b/target/linux/generic/patches-2.6.30/032-ppc_gcc_build_fix.patch
new file mode 100644
index 0000000000..3151eee26e
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/032-ppc_gcc_build_fix.patch
@@ -0,0 +1,226 @@
+GCC 4.4.x looks to be adding support for generating out-of-line register
+saves/restores based on:
+
+http://gcc.gnu.org/ml/gcc-patches/2008-04/msg01678.html
+
+This breaks the kernel build as we'd have to link with libgcc to get the
+implementation of the register save/restores.
+
+To workaround this issue, we just stole the save/restore code from gcc
+and simplified it down for our needs (integer only).  We only do this if
+PPC32 as gcc makes believe the linker on ppc64 will deal with this and
+only if CONFIG_CC_OPTIMIZE_FOR_SIZE is set (thus -Os).
+
+Signed-off-by: Kumar Gala <[EMAIL PROTECTED]>
+---
+
+If someone using cutting edge toolchains for ppc64 could test and make
+sure if we enable CONFIG_CC_OPTIMIZE_FOR_SIZE things work that would be
+nice.
+
+- k
+
+ arch/powerpc/kernel/misc_32.S   |   77 +++++++++++++++++++++++++++
+ arch/powerpc/kernel/ppc_ksyms.c |  111 +++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 188 insertions(+), 0 deletions(-)
+
+--- a/arch/powerpc/kernel/misc_32.S
++++ b/arch/powerpc/kernel/misc_32.S
+@@ -813,3 +813,80 @@ relocate_new_kernel_end:
+ relocate_new_kernel_size:
+ 	.long relocate_new_kernel_end - relocate_new_kernel
+ #endif
++
++#if defined(CONFIG_PPC32) && defined(CONFIG_CC_OPTIMIZE_FOR_SIZE)
++/* Routines for saving integer registers, called by the compiler.  */
++/* Called with r11 pointing to the stack header word of the caller of the */
++/* function, just beyond the end of the integer save area.  */
++
++_GLOBAL(_savegpr_14)   stw     14,-72(11)      /* save gp registers */
++_GLOBAL(_savegpr_15)   stw     15,-68(11)
++_GLOBAL(_savegpr_16)   stw     16,-64(11)
++_GLOBAL(_savegpr_17)   stw     17,-60(11)
++_GLOBAL(_savegpr_18)   stw     18,-56(11)
++_GLOBAL(_savegpr_19)   stw     19,-52(11)
++_GLOBAL(_savegpr_20)   stw     20,-48(11)
++_GLOBAL(_savegpr_21)   stw     21,-44(11)
++_GLOBAL(_savegpr_22)   stw     22,-40(11)
++_GLOBAL(_savegpr_23)   stw     23,-36(11)
++_GLOBAL(_savegpr_24)   stw     24,-32(11)
++_GLOBAL(_savegpr_25)   stw     25,-28(11)
++_GLOBAL(_savegpr_26)   stw     26,-24(11)
++_GLOBAL(_savegpr_27)   stw     27,-20(11)
++_GLOBAL(_savegpr_28)   stw     28,-16(11)
++_GLOBAL(_savegpr_29)   stw     29,-12(11)
++_GLOBAL(_savegpr_30)   stw     30,-8(11)
++_GLOBAL(_savegpr_31)   stw     31,-4(11)
++                       blr
++
++/* Routines for restoring integer registers, called by the compiler.  */
++/* Called with r11 pointing to the stack header word of the caller of the */
++/* function, just beyond the end of the integer restore area.  */
++
++_GLOBAL(_restgpr_14)   lwz     14,-72(11)      /* restore gp registers */
++_GLOBAL(_restgpr_15)   lwz     15,-68(11)
++_GLOBAL(_restgpr_16)   lwz     16,-64(11)
++_GLOBAL(_restgpr_17)   lwz     17,-60(11)
++_GLOBAL(_restgpr_18)   lwz     18,-56(11)
++_GLOBAL(_restgpr_19)   lwz     19,-52(11)
++_GLOBAL(_restgpr_20)   lwz     20,-48(11)
++_GLOBAL(_restgpr_21)   lwz     21,-44(11)
++_GLOBAL(_restgpr_22)   lwz     22,-40(11)
++_GLOBAL(_restgpr_23)   lwz     23,-36(11)
++_GLOBAL(_restgpr_24)   lwz     24,-32(11)
++_GLOBAL(_restgpr_25)   lwz     25,-28(11)
++_GLOBAL(_restgpr_26)   lwz     26,-24(11)
++_GLOBAL(_restgpr_27)   lwz     27,-20(11)
++_GLOBAL(_restgpr_28)   lwz     28,-16(11)
++_GLOBAL(_restgpr_29)   lwz     29,-12(11)
++_GLOBAL(_restgpr_30)   lwz     30,-8(11)
++_GLOBAL(_restgpr_31)   lwz     31,-4(11)
++                       blr
++
++/* Routines for restoring integer registers, called by the compiler.  */
++/* Called with r11 pointing to the stack header word of the caller of the */
++/* function, just beyond the end of the integer restore area.  */
++
++_GLOBAL(_restgpr_14_x) lwz     14,-72(11)      /* restore gp registers */
++_GLOBAL(_restgpr_15_x) lwz     15,-68(11)
++_GLOBAL(_restgpr_16_x) lwz     16,-64(11)
++_GLOBAL(_restgpr_17_x) lwz     17,-60(11)
++_GLOBAL(_restgpr_18_x) lwz     18,-56(11)
++_GLOBAL(_restgpr_19_x) lwz     19,-52(11)
++_GLOBAL(_restgpr_20_x) lwz     20,-48(11)
++_GLOBAL(_restgpr_21_x) lwz     21,-44(11)
++_GLOBAL(_restgpr_22_x) lwz     22,-40(11)
++_GLOBAL(_restgpr_23_x) lwz     23,-36(11)
++_GLOBAL(_restgpr_24_x) lwz     24,-32(11)
++_GLOBAL(_restgpr_25_x) lwz     25,-28(11)
++_GLOBAL(_restgpr_26_x) lwz     26,-24(11)
++_GLOBAL(_restgpr_27_x) lwz     27,-20(11)
++_GLOBAL(_restgpr_28_x) lwz     28,-16(11)
++_GLOBAL(_restgpr_29_x) lwz     29,-12(11)
++_GLOBAL(_restgpr_30_x) lwz     30,-8(11)
++_GLOBAL(_restgpr_31_x) lwz     0,4(11)
++                       lwz     31,-4(11)
++                       mtlr    0
++                       mr      1,11
++                       blr
++#endif
+--- a/arch/powerpc/kernel/ppc_ksyms.c
++++ b/arch/powerpc/kernel/ppc_ksyms.c
+@@ -188,3 +188,114 @@ EXPORT_SYMBOL(__mtdcr);
+ EXPORT_SYMBOL(__mfdcr);
+ #endif
+ EXPORT_SYMBOL(empty_zero_page);
++
++#if defined(CONFIG_PPC32) && defined(CONFIG_CC_OPTIMIZE_FOR_SIZE)
++void _savegpr_14(void);
++void _savegpr_15(void);
++void _savegpr_16(void);
++void _savegpr_17(void);
++void _savegpr_18(void);
++void _savegpr_19(void);
++void _savegpr_20(void);
++void _savegpr_21(void);
++void _savegpr_22(void);
++void _savegpr_23(void);
++void _savegpr_24(void);
++void _savegpr_25(void);
++void _savegpr_26(void);
++void _savegpr_27(void);
++void _savegpr_28(void);
++void _savegpr_29(void);
++void _savegpr_30(void);
++void _savegpr_31(void);
++void _restgpr_14(void);
++void _restgpr_15(void);
++void _restgpr_16(void);
++void _restgpr_17(void);
++void _restgpr_18(void);
++void _restgpr_19(void);
++void _restgpr_20(void);
++void _restgpr_21(void);
++void _restgpr_22(void);
++void _restgpr_23(void);
++void _restgpr_24(void);
++void _restgpr_25(void);
++void _restgpr_26(void);
++void _restgpr_27(void);
++void _restgpr_28(void);
++void _restgpr_29(void);
++void _restgpr_30(void);
++void _restgpr_31(void);
++void _restgpr_14_x(void);
++void _restgpr_15_x(void);
++void _restgpr_16_x(void);
++void _restgpr_17_x(void);
++void _restgpr_18_x(void);
++void _restgpr_19_x(void);
++void _restgpr_20_x(void);
++void _restgpr_21_x(void);
++void _restgpr_22_x(void);
++void _restgpr_23_x(void);
++void _restgpr_24_x(void);
++void _restgpr_25_x(void);
++void _restgpr_26_x(void);
++void _restgpr_27_x(void);
++void _restgpr_28_x(void);
++void _restgpr_29_x(void);
++void _restgpr_30_x(void);
++void _restgpr_31_x(void);
++EXPORT_SYMBOL(_savegpr_14);
++EXPORT_SYMBOL(_savegpr_15);
++EXPORT_SYMBOL(_savegpr_16);
++EXPORT_SYMBOL(_savegpr_17);
++EXPORT_SYMBOL(_savegpr_18);
++EXPORT_SYMBOL(_savegpr_19);
++EXPORT_SYMBOL(_savegpr_20);
++EXPORT_SYMBOL(_savegpr_21);
++EXPORT_SYMBOL(_savegpr_22);
++EXPORT_SYMBOL(_savegpr_23);
++EXPORT_SYMBOL(_savegpr_24);
++EXPORT_SYMBOL(_savegpr_25);
++EXPORT_SYMBOL(_savegpr_26);
++EXPORT_SYMBOL(_savegpr_27);
++EXPORT_SYMBOL(_savegpr_28);
++EXPORT_SYMBOL(_savegpr_29);
++EXPORT_SYMBOL(_savegpr_30);
++EXPORT_SYMBOL(_savegpr_31);
++EXPORT_SYMBOL(_restgpr_14);
++EXPORT_SYMBOL(_restgpr_15);
++EXPORT_SYMBOL(_restgpr_16);
++EXPORT_SYMBOL(_restgpr_17);
++EXPORT_SYMBOL(_restgpr_18);
++EXPORT_SYMBOL(_restgpr_19);
++EXPORT_SYMBOL(_restgpr_20);
++EXPORT_SYMBOL(_restgpr_21);
++EXPORT_SYMBOL(_restgpr_22);
++EXPORT_SYMBOL(_restgpr_23);
++EXPORT_SYMBOL(_restgpr_24);
++EXPORT_SYMBOL(_restgpr_25);
++EXPORT_SYMBOL(_restgpr_26);
++EXPORT_SYMBOL(_restgpr_27);
++EXPORT_SYMBOL(_restgpr_28);
++EXPORT_SYMBOL(_restgpr_29);
++EXPORT_SYMBOL(_restgpr_30);
++EXPORT_SYMBOL(_restgpr_31);
++EXPORT_SYMBOL(_restgpr_14_x);
++EXPORT_SYMBOL(_restgpr_15_x);
++EXPORT_SYMBOL(_restgpr_16_x);
++EXPORT_SYMBOL(_restgpr_17_x);
++EXPORT_SYMBOL(_restgpr_18_x);
++EXPORT_SYMBOL(_restgpr_19_x);
++EXPORT_SYMBOL(_restgpr_20_x);
++EXPORT_SYMBOL(_restgpr_21_x);
++EXPORT_SYMBOL(_restgpr_22_x);
++EXPORT_SYMBOL(_restgpr_23_x);
++EXPORT_SYMBOL(_restgpr_24_x);
++EXPORT_SYMBOL(_restgpr_25_x);
++EXPORT_SYMBOL(_restgpr_26_x);
++EXPORT_SYMBOL(_restgpr_27_x);
++EXPORT_SYMBOL(_restgpr_28_x);
++EXPORT_SYMBOL(_restgpr_29_x);
++EXPORT_SYMBOL(_restgpr_30_x);
++EXPORT_SYMBOL(_restgpr_31_x);
++#endif /* CONFIG_PPC32 && CONFIG_CC_OPTIMIZE_FOR_SIZE */
diff --git a/target/linux/generic/patches-2.6.30/060-block2mtd_init.patch b/target/linux/generic/patches-2.6.30/060-block2mtd_init.patch
new file mode 100644
index 0000000000..50df4aae0f
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/060-block2mtd_init.patch
@@ -0,0 +1,110 @@
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -14,6 +14,7 @@
+ #include <linux/list.h>
+ #include <linux/init.h>
+ #include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
+ #include <linux/buffer_head.h>
+ #include <linux/mutex.h>
+ #include <linux/mount.h>
+@@ -232,10 +233,11 @@ static void block2mtd_free_device(struct
+ 
+ 
+ /* FIXME: ensure that mtd->size % erase_size == 0 */
+-static struct block2mtd_dev *add_device(char *devname, int erase_size)
++static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname)
+ {
+ 	struct block_device *bdev;
+ 	struct block2mtd_dev *dev;
++	struct mtd_partition *part;
+ 	char *name;
+ 
+ 	if (!devname)
+@@ -273,17 +275,17 @@ static struct block2mtd_dev *add_device(
+ 
+ 	mutex_init(&dev->write_mutex);
+ 
+-	/* Setup the MTD structure */
+-	/* make the name contain the block device in */
+-	name = kmalloc(sizeof("block2mtd: ") + strlen(devname) + 1,
+-			GFP_KERNEL);
++	if (!mtdname)
++		mtdname = devname;
++
++	name = kmalloc(strlen(mtdname) + 1, GFP_KERNEL);
+ 	if (!name)
+ 		goto devinit_err;
+ 
+-	sprintf(name, "block2mtd: %s", devname);
++	strcpy(name, mtdname);
+ 	dev->mtd.name = name;
+ 
+-	dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK;
++	dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK & ~(erase_size - 1);
+ 	dev->mtd.erasesize = erase_size;
+ 	dev->mtd.writesize = 1;
+ 	dev->mtd.type = MTD_RAM;
+@@ -296,14 +298,17 @@ static struct block2mtd_dev *add_device(
+ 	dev->mtd.priv = dev;
+ 	dev->mtd.owner = THIS_MODULE;
+ 
+-	if (add_mtd_device(&dev->mtd)) {
++	part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
++	part->name = dev->mtd.name;
++	part->offset = 0;
++	part->size = dev->mtd.size;
++	if (add_mtd_partitions(&dev->mtd, part, 1)) {
+ 		/* Device didnt get added, so free the entry */
+ 		goto devinit_err;
+ 	}
+ 	list_add(&dev->list, &blkmtd_device_list);
+ 	INFO("mtd%d: [%s] erase_size = %dKiB [%d]", dev->mtd.index,
+-			dev->mtd.name + strlen("block2mtd: "),
+-			dev->mtd.erasesize >> 10, dev->mtd.erasesize);
++			mtdname, dev->mtd.erasesize >> 10, dev->mtd.erasesize);
+ 	return dev;
+ 
+ devinit_err:
+@@ -376,9 +381,9 @@ static char block2mtd_paramline[80 + 12]
+ 
+ static int block2mtd_setup2(const char *val)
+ {
+-	char buf[80 + 12]; /* 80 for device, 12 for erase size */
++	char buf[80 + 12 + 80]; /* 80 for device, 12 for erase size, 80 for name */
+ 	char *str = buf;
+-	char *token[2];
++	char *token[3];
+ 	char *name;
+ 	size_t erase_size = PAGE_SIZE;
+ 	int i, ret;
+@@ -389,7 +394,7 @@ static int block2mtd_setup2(const char *
+ 	strcpy(str, val);
+ 	kill_final_newline(str);
+ 
+-	for (i = 0; i < 2; i++)
++	for (i = 0; i < 3; i++)
+ 		token[i] = strsep(&str, ",");
+ 
+ 	if (str)
+@@ -408,8 +413,10 @@ static int block2mtd_setup2(const char *
+ 			parse_err("illegal erase size");
+ 		}
+ 	}
++	if (token[2] && (strlen(token[2]) + 1 > 80))
++		parse_err("mtd device name too long");
+ 
+-	add_device(name, erase_size);
++	add_device(name, erase_size, token[2]);
+ 
+ 	return 0;
+ }
+@@ -443,7 +450,7 @@ static int block2mtd_setup(const char *v
+ 
+ 
+ module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);
+-MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>]\"");
++MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>]]\"");
+ 
+ static int __init block2mtd_init(void)
+ {
diff --git a/target/linux/generic/patches-2.6.30/065-rootfs_split.patch b/target/linux/generic/patches-2.6.30/065-rootfs_split.patch
new file mode 100644
index 0000000000..34c1f5addf
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/065-rootfs_split.patch
@@ -0,0 +1,633 @@
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -53,6 +53,16 @@ config MTD_TESTS
+ 	  should normally be compiled as kernel modules. The modules perform
+ 	  various checks and verifications when loaded.
+ 
++config MTD_ROOTFS_ROOT_DEV
++	bool "Automatically set 'rootfs' partition to be root filesystem"
++	depends on MTD_PARTITIONS
++	default y
++
++config MTD_ROOTFS_SPLIT
++	bool "Automatically split 'rootfs' partition for squashfs"
++	depends on MTD_PARTITIONS
++	default y
++
+ config MTD_REDBOOT_PARTS
+ 	tristate "RedBoot partition table parsing"
+ 	depends on MTD_PARTITIONS
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -18,6 +18,8 @@
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+ #include <linux/mtd/compatmac.h>
++#include <linux/root_dev.h>
++#include <linux/magic.h>
+ 
+ /* Our partition linked list */
+ static LIST_HEAD(mtd_partitions);
+@@ -37,7 +39,7 @@ struct mtd_part {
+  * the pointer to that structure with this macro.
+  */
+ #define PART(x)  ((struct mtd_part *)(x))
+-
++#define IS_PART(mtd) (mtd->read == part_read)
+ 
+ /*
+  * MTD methods which simply translate the effective address and pass through
+@@ -512,6 +514,155 @@ out_register:
+ 	return slave;
+ }
+ 
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++#define ROOTFS_SPLIT_NAME "rootfs_data"
++#define ROOTFS_REMOVED_NAME "<removed>"
++
++struct squashfs_super_block {
++	__le32 s_magic;
++	__le32 pad0[9];
++	__le64 bytes_used;
++};
++
++
++static int split_squashfs(struct mtd_info *master, int offset, int *split_offset)
++{
++	struct squashfs_super_block sb;
++	int len, ret;
++
++	ret = master->read(master, offset, sizeof(sb), &len, (void *) &sb);
++	if (ret || (len != sizeof(sb))) {
++		printk(KERN_ALERT "split_squashfs: error occured while reading "
++			"from \"%s\"\n", master->name);
++		return -EINVAL;
++	}
++
++	if (SQUASHFS_MAGIC != le32_to_cpu(sb.s_magic) ) {
++		printk(KERN_ALERT "split_squashfs: no squashfs found in \"%s\"\n",
++			master->name);
++		*split_offset = 0;
++		return 0;
++	}
++
++	if (le64_to_cpu((sb.bytes_used)) <= 0) {
++		printk(KERN_ALERT "split_squashfs: squashfs is empty in \"%s\"\n",
++			master->name);
++		*split_offset = 0;
++		return 0;
++	}
++
++	len = (u32) le64_to_cpu(sb.bytes_used);
++	len += (offset & 0x000fffff);
++	len +=  (master->erasesize - 1);
++	len &= ~(master->erasesize - 1);
++	len -= (offset & 0x000fffff);
++	*split_offset = offset + len;
++
++	return 0;
++}
++
++static int split_rootfs_data(struct mtd_info *master, struct mtd_info *rpart, const struct mtd_partition *part,
++		int index)
++{
++	struct mtd_partition *dpart;
++	struct mtd_part *slave = NULL;
++	int split_offset = 0;
++	int ret;
++
++	ret = split_squashfs(master, part->offset, &split_offset);
++	if (ret)
++		return ret;
++
++	if (split_offset <= 0)
++		return 0;
++
++	dpart = kmalloc(sizeof(*part)+sizeof(ROOTFS_SPLIT_NAME)+1, GFP_KERNEL);
++	if (dpart == NULL) {
++		printk(KERN_INFO "split_squashfs: no memory for partition \"%s\"\n",
++			ROOTFS_SPLIT_NAME);
++		return -ENOMEM;
++	}
++
++	memcpy(dpart, part, sizeof(*part));
++	dpart->name = (unsigned char *)&dpart[1];
++	strcpy(dpart->name, ROOTFS_SPLIT_NAME);
++
++	dpart->size -= split_offset - dpart->offset;
++	dpart->offset = split_offset;
++
++	if (dpart == NULL)
++		return 1;
++
++	printk(KERN_INFO "mtd: partition \"%s\" created automatically, ofs=%llX, len=%llX \n",
++		ROOTFS_SPLIT_NAME, dpart->offset, dpart->size);
++
++	slave = add_one_partition(master, dpart, index, split_offset);
++	if (!slave) {
++		kfree(dpart);
++		return -ENOMEM;
++	}
++	rpart->split = &slave->mtd;
++
++	return 0;
++}
++
++static int refresh_rootfs_split(struct mtd_info *mtd)
++{
++	struct mtd_partition tpart;
++	struct mtd_part *part;
++	char *name;
++	int index = 0;
++	int offset, size;
++	int ret;
++
++	part = PART(mtd);
++
++	/* check for the new squashfs offset first */
++	ret = split_squashfs(part->master, part->offset, &offset);
++	if (ret)
++		return ret;
++
++	if ((offset > 0) && !mtd->split) {
++		printk(KERN_INFO "%s: creating new split partition for \"%s\"\n", __func__, mtd->name);
++		/* if we don't have a rootfs split partition, create a new one */
++		tpart.name = (char *) mtd->name;
++		tpart.size = mtd->size;
++		tpart.offset = part->offset;
++
++		/* find the index of the last partition */
++		if (!list_empty(&mtd_partitions))
++			index = list_first_entry(&mtd_partitions, struct mtd_part, list)->index + 1;
++
++		return split_rootfs_data(part->master, &part->mtd, &tpart, index);
++	} else if ((offset > 0) && mtd->split) {
++		/* update the offsets of the existing partition */
++		size = mtd->size + part->offset - offset;
++
++		part = PART(mtd->split);
++		part->offset = offset;
++		part->mtd.size = size;
++		printk(KERN_INFO "%s: %s partition \"" ROOTFS_SPLIT_NAME "\", offset: 0x%06x (0x%06x)\n",
++			__func__, (!strcmp(part->mtd.name, ROOTFS_SPLIT_NAME) ? "updating" : "creating"),
++			(u32) part->offset, (u32) part->mtd.size);
++		name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
++		strcpy(name, ROOTFS_SPLIT_NAME);
++		part->mtd.name = name;
++	} else if ((offset <= 0) && mtd->split) {
++		printk(KERN_INFO "%s: removing partition \"%s\"\n", __func__, mtd->split->name);
++
++		/* mark existing partition as removed */
++		part = PART(mtd->split);
++		name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
++		strcpy(name, ROOTFS_REMOVED_NAME);
++		part->mtd.name = name;
++		part->offset = 0;
++		part->mtd.size = 0;
++	}
++
++	return 0;
++}
++#endif /* CONFIG_MTD_ROOTFS_SPLIT */
++
+ /*
+  * This function, given a master MTD object and a partition table, creates
+  * and registers slave MTD objects which are bound to the master according to
+@@ -527,14 +678,29 @@ int add_mtd_partitions(struct mtd_info *
+ {
+ 	struct mtd_part *slave;
+ 	uint64_t cur_offset = 0;
+-	int i;
++	int i, j, ret;
+ 
+ 	printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
+ 
+-	for (i = 0; i < nbparts; i++) {
+-		slave = add_one_partition(master, parts + i, i, cur_offset);
++	for (i = 0, j = 0; i < nbparts; i++) {
++		slave = add_one_partition(master, parts + i, j++, cur_offset);
+ 		if (!slave)
+ 			return -ENOMEM;
++
++		if (!strcmp(parts[i].name, "rootfs") && slave->registered) {
++#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
++			if (ROOT_DEV == 0) {
++				printk(KERN_NOTICE "mtd: partition \"rootfs\" "
++					"set to be root filesystem\n");
++				ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, slave->mtd.index);
++			}
++#endif
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++			ret = split_rootfs_data(master, &slave->mtd, &parts[i], j);
++			if (ret == 0)
++				j++;
++#endif
++		}
+ 		cur_offset = slave->offset + slave->mtd.size;
+ 	}
+ 
+@@ -542,6 +708,32 @@ int add_mtd_partitions(struct mtd_info *
+ }
+ EXPORT_SYMBOL(add_mtd_partitions);
+ 
++int refresh_mtd_partitions(struct mtd_info *mtd)
++{
++	int ret = 0;
++
++	if (IS_PART(mtd)) {
++		struct mtd_part *part;
++		struct mtd_info *master;
++
++		part = PART(mtd);
++		master = part->master;
++		if (master->refresh_device)
++			ret = master->refresh_device(master);
++	}
++
++	if (!ret && mtd->refresh_device)
++		ret = mtd->refresh_device(mtd);
++
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++	if (!ret && IS_PART(mtd) && !strcmp(mtd->name, "rootfs"))
++		refresh_rootfs_split(mtd);
++#endif
++
++	return 0;
++}
++EXPORT_SYMBOL_GPL(refresh_mtd_partitions);
++
+ static DEFINE_SPINLOCK(part_parser_lock);
+ static LIST_HEAD(part_parsers);
+ 
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -29,6 +29,8 @@ struct block2mtd_dev {
+ 	struct block_device *blkdev;
+ 	struct mtd_info mtd;
+ 	struct mutex write_mutex;
++	rwlock_t bdev_mutex;
++	char devname[0];
+ };
+ 
+ 
+@@ -81,6 +83,12 @@ static int block2mtd_erase(struct mtd_in
+ 	size_t len = instr->len;
+ 	int err;
+ 
++	read_lock(&dev->bdev_mutex);
++	if (!dev->blkdev) {
++		err = -EINVAL;
++		goto done;
++	}
++
+ 	instr->state = MTD_ERASING;
+ 	mutex_lock(&dev->write_mutex);
+ 	err = _block2mtd_erase(dev, from, len);
+@@ -93,6 +101,10 @@ static int block2mtd_erase(struct mtd_in
+ 
+ 	instr->state = MTD_ERASE_DONE;
+ 	mtd_erase_callback(instr);
++
++done:
++	read_unlock(&dev->bdev_mutex);
++
+ 	return err;
+ }
+ 
+@@ -104,10 +116,14 @@ static int block2mtd_read(struct mtd_inf
+ 	struct page *page;
+ 	int index = from >> PAGE_SHIFT;
+ 	int offset = from & (PAGE_SIZE-1);
+-	int cpylen;
++	int cpylen, err = 0;
++
++	read_lock(&dev->bdev_mutex);
++	if (!dev->blkdev || (from > mtd->size)) {
++		err = -EINVAL;
++		goto done;
++	}
+ 
+-	if (from > mtd->size)
+-		return -EINVAL;
+ 	if (from + len > mtd->size)
+ 		len = mtd->size - from;
+ 
+@@ -122,10 +138,14 @@ static int block2mtd_read(struct mtd_inf
+ 		len = len - cpylen;
+ 
+ 		page = page_read(dev->blkdev->bd_inode->i_mapping, index);
+-		if (!page)
+-			return -ENOMEM;
+-		if (IS_ERR(page))
+-			return PTR_ERR(page);
++		if (!page) {
++			err = -ENOMEM;
++			goto done;
++		}
++		if (IS_ERR(page)) {
++			err = PTR_ERR(page);
++			goto done;
++		}
+ 
+ 		memcpy(buf, page_address(page) + offset, cpylen);
+ 		page_cache_release(page);
+@@ -136,7 +156,10 @@ static int block2mtd_read(struct mtd_inf
+ 		offset = 0;
+ 		index++;
+ 	}
+-	return 0;
++
++done:
++	read_unlock(&dev->bdev_mutex);
++	return err;
+ }
+ 
+ 
+@@ -188,12 +211,22 @@ static int block2mtd_write(struct mtd_in
+ 		size_t *retlen, const u_char *buf)
+ {
+ 	struct block2mtd_dev *dev = mtd->priv;
+-	int err;
++	int err = 0;
++
++	read_lock(&dev->bdev_mutex);
++	if (!dev->blkdev) {
++		err = -EINVAL;
++		goto done;
++	}
+ 
+ 	if (!len)
+-		return 0;
+-	if (to >= mtd->size)
+-		return -ENOSPC;
++		goto done;
++
++	if (to >= mtd->size) {
++		err = -ENOSPC;
++		goto done;
++	}
++
+ 	if (to + len > mtd->size)
+ 		len = mtd->size - to;
+ 
+@@ -202,6 +235,9 @@ static int block2mtd_write(struct mtd_in
+ 	mutex_unlock(&dev->write_mutex);
+ 	if (err > 0)
+ 		err = 0;
++
++done:
++	read_unlock(&dev->bdev_mutex);
+ 	return err;
+ }
+ 
+@@ -210,52 +246,29 @@ static int block2mtd_write(struct mtd_in
+ static void block2mtd_sync(struct mtd_info *mtd)
+ {
+ 	struct block2mtd_dev *dev = mtd->priv;
+-	sync_blockdev(dev->blkdev);
+-	return;
+-}
+-
+-
+-static void block2mtd_free_device(struct block2mtd_dev *dev)
+-{
+-	if (!dev)
+-		return;
+-
+-	kfree(dev->mtd.name);
+ 
+-	if (dev->blkdev) {
+-		invalidate_mapping_pages(dev->blkdev->bd_inode->i_mapping,
+-					0, -1);
+-		close_bdev_exclusive(dev->blkdev, FMODE_READ|FMODE_WRITE);
+-	}
++	read_lock(&dev->bdev_mutex);
++	if (dev->blkdev)
++		sync_blockdev(dev->blkdev);
++	read_unlock(&dev->bdev_mutex);
+ 
+-	kfree(dev);
++	return;
+ }
+ 
+ 
+-/* FIXME: ensure that mtd->size % erase_size == 0 */
+-static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname)
++static int _open_bdev(struct block2mtd_dev *dev)
+ {
+ 	struct block_device *bdev;
+-	struct block2mtd_dev *dev;
+-	struct mtd_partition *part;
+-	char *name;
+-
+-	if (!devname)
+-		return NULL;
+-
+-	dev = kzalloc(sizeof(struct block2mtd_dev), GFP_KERNEL);
+-	if (!dev)
+-		return NULL;
+ 
+ 	/* Get a handle on the device */
+-	bdev = open_bdev_exclusive(devname, FMODE_READ|FMODE_WRITE, NULL);
++	bdev = open_bdev_exclusive(dev->devname, FMODE_READ|FMODE_WRITE, NULL);
+ #ifndef MODULE
+ 	if (IS_ERR(bdev)) {
+ 
+ 		/* We might not have rootfs mounted at this point. Try
+ 		   to resolve the device name by other means. */
+ 
+-		dev_t devt = name_to_dev_t(devname);
++		dev_t devt = name_to_dev_t(dev->devname);
+ 		if (devt) {
+ 			bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);
+ 		}
+@@ -263,17 +276,98 @@ static struct block2mtd_dev *add_device(
+ #endif
+ 
+ 	if (IS_ERR(bdev)) {
+-		ERROR("error: cannot open device %s", devname);
+-		goto devinit_err;
++		ERROR("error: cannot open device %s", dev->devname);
++		return 1;
+ 	}
+ 	dev->blkdev = bdev;
+ 
+ 	if (MAJOR(bdev->bd_dev) == MTD_BLOCK_MAJOR) {
+ 		ERROR("attempting to use an MTD device as a block device");
+-		goto devinit_err;
++		return 1;
+ 	}
+ 
++	return 0;
++}
++
++static void _close_bdev(struct block2mtd_dev *dev)
++{
++	struct block_device *bdev;
++
++	if (!dev->blkdev)
++		return;
++
++	bdev = dev->blkdev;
++	invalidate_mapping_pages(dev->blkdev->bd_inode->i_mapping, 0, -1);
++	close_bdev_exclusive(dev->blkdev, FMODE_READ|FMODE_WRITE);
++	dev->blkdev = NULL;
++}
++
++static void block2mtd_free_device(struct block2mtd_dev *dev)
++{
++	if (!dev)
++		return;
++
++	kfree(dev->mtd.name);
++	_close_bdev(dev);
++	kfree(dev);
++}
++
++
++static int block2mtd_refresh(struct mtd_info *mtd)
++{
++	struct block2mtd_dev *dev = mtd->priv;
++	struct block_device *bdev;
++	dev_t devt;
++	int err = 0;
++
++	/* no other mtd function can run at this point */
++	write_lock(&dev->bdev_mutex);
++
++	/* get the device number for the whole disk */
++	devt = MKDEV(MAJOR(dev->blkdev->bd_dev), 0);
++
++	/* close the old block device */
++	_close_bdev(dev);
++
++	/* open the whole disk, issue a partition rescan, then */
++	bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);
++	if (!bdev || !bdev->bd_disk)
++		err = -EINVAL;
++#ifndef CONFIG_MTD_BLOCK2MTD_MODULE
++	else
++		err = rescan_partitions(bdev->bd_disk, bdev);
++#endif
++	if (bdev)
++		close_bdev_exclusive(bdev, FMODE_READ|FMODE_WRITE);
++
++	/* try to open the partition block device again */
++	_open_bdev(dev);
++	write_unlock(&dev->bdev_mutex);
++
++	return err;
++}
++
++/* FIXME: ensure that mtd->size % erase_size == 0 */
++static struct block2mtd_dev *add_device(char *devname, int erase_size, char *mtdname)
++{
++	struct block2mtd_dev *dev;
++	struct mtd_partition *part;
++	char *name;
++
++	if (!devname)
++		return NULL;
++
++	dev = kzalloc(sizeof(struct block2mtd_dev) + strlen(devname) + 1, GFP_KERNEL);
++	if (!dev)
++		return NULL;
++
++	strcpy(dev->devname, devname);
++
++	if (_open_bdev(dev))
++		goto devinit_err;
++
+ 	mutex_init(&dev->write_mutex);
++	rwlock_init(&dev->bdev_mutex);
+ 
+ 	if (!mtdname)
+ 		mtdname = devname;
+@@ -297,6 +391,7 @@ static struct block2mtd_dev *add_device(
+ 	dev->mtd.read = block2mtd_read;
+ 	dev->mtd.priv = dev;
+ 	dev->mtd.owner = THIS_MODULE;
++	dev->mtd.refresh_device = block2mtd_refresh;
+ 
+ 	part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
+ 	part->name = dev->mtd.name;
+--- a/drivers/mtd/mtdchar.c
++++ b/drivers/mtd/mtdchar.c
+@@ -17,6 +17,7 @@
+ 
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/compatmac.h>
++#include <linux/mtd/partitions.h>
+ 
+ #include <asm/uaccess.h>
+ 
+@@ -750,6 +751,13 @@ static int mtd_ioctl(struct inode *inode
+ 		file->f_pos = 0;
+ 		break;
+ 	}
++#ifdef CONFIG_MTD_PARTITIONS
++	case MTDREFRESH:
++	{
++		ret = refresh_mtd_partitions(mtd);
++		break;
++	}
++#endif
+ 
+ 	default:
+ 		ret = -ENOTTY;
+--- a/include/linux/mtd/mtd.h
++++ b/include/linux/mtd/mtd.h
+@@ -101,6 +101,7 @@ struct mtd_oob_ops {
+ 	uint8_t		*oobbuf;
+ };
+ 
++struct mtd_info;
+ struct mtd_info {
+ 	u_char type;
+ 	uint32_t flags;
+@@ -241,6 +242,9 @@ struct mtd_info {
+ 	struct device dev;
+ 	int usecount;
+ 
++	int (*refresh_device)(struct mtd_info *mtd);
++	struct mtd_info *split;
++
+ 	/* If the driver is something smart, like UBI, it may need to maintain
+ 	 * its own reference counting. The below functions are only for driver.
+ 	 * The driver may register its callbacks. These callbacks are not
+--- a/include/linux/mtd/partitions.h
++++ b/include/linux/mtd/partitions.h
+@@ -34,6 +34,7 @@
+  * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK).
+  */
+ 
++struct mtd_partition;
+ struct mtd_partition {
+ 	char *name;			/* identifier string */
+ 	uint64_t size;			/* partition size */
+@@ -41,6 +42,7 @@ struct mtd_partition {
+ 	uint32_t mask_flags;		/* master MTD flags to mask out for this partition */
+ 	struct nand_ecclayout *ecclayout;	/* out of band layout for this partition (NAND only)*/
+ 	struct mtd_info **mtdp;		/* pointer to store the MTD object */
++	int (*refresh_partition)(struct mtd_info *);
+ };
+ 
+ #define MTDPART_OFS_NXTBLK	(-2)
+@@ -50,6 +52,7 @@ struct mtd_partition {
+ 
+ int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
+ int del_mtd_partitions(struct mtd_info *);
++int refresh_mtd_partitions(struct mtd_info *);
+ 
+ /*
+  * Functions dealing with the various ways of partitioning the space
+--- a/include/mtd/mtd-abi.h
++++ b/include/mtd/mtd-abi.h
+@@ -95,6 +95,7 @@ struct otp_info {
+ #define ECCGETLAYOUT		_IOR('M', 17, struct nand_ecclayout)
+ #define ECCGETSTATS		_IOR('M', 18, struct mtd_ecc_stats)
+ #define MTDFILEMODE		_IO('M', 19)
++#define MTDREFRESH		_IO('M', 23)
+ 
+ /*
+  * Obsolete legacy interface. Keep it in order not to break userspace
diff --git a/target/linux/generic/patches-2.6.30/066-block2mtd_probe.patch b/target/linux/generic/patches-2.6.30/066-block2mtd_probe.patch
new file mode 100644
index 0000000000..b2b1a347f4
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/066-block2mtd_probe.patch
@@ -0,0 +1,10 @@
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -268,6 +268,7 @@ static int _open_bdev(struct block2mtd_d
+ 		/* We might not have rootfs mounted at this point. Try
+ 		   to resolve the device name by other means. */
+ 
++		wait_for_device_probe();
+ 		dev_t devt = name_to_dev_t(dev->devname);
+ 		if (devt) {
+ 			bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);
diff --git a/target/linux/generic/patches-2.6.30/070-redboot_space.patch b/target/linux/generic/patches-2.6.30/070-redboot_space.patch
new file mode 100644
index 0000000000..6ace83c01a
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/070-redboot_space.patch
@@ -0,0 +1,30 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -249,14 +249,21 @@ static int parse_redboot_partitions(stru
+ #endif
+ 		names += strlen(names)+1;
+ 
+-#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+ 		if(fl->next && fl->img->flash_base + fl->img->size + master->erasesize <= fl->next->img->flash_base) {
+-			i++;
+-			parts[i].offset = parts[i-1].size + parts[i-1].offset;
+-			parts[i].size = fl->next->img->flash_base - parts[i].offset;
+-			parts[i].name = nullname;
+-		}
++			if (!strcmp(parts[i].name, "rootfs")) {
++				parts[i].size = fl->next->img->flash_base;
++				parts[i].size &= ~(master->erasesize - 1);
++				parts[i].size -= parts[i].offset;
++#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
++				nrparts--;
++			} else {
++				i++;
++				parts[i].offset = parts[i-1].size + parts[i-1].offset;
++				parts[i].size = fl->next->img->flash_base - parts[i].offset;
++				parts[i].name = nullname;
+ #endif
++			}
++		}
+ 		tmp_fl = fl;
+ 		fl = fl->next;
+ 		kfree(tmp_fl);
diff --git a/target/linux/generic/patches-2.6.30/071-redboot_boardconfig.patch b/target/linux/generic/patches-2.6.30/071-redboot_boardconfig.patch
new file mode 100644
index 0000000000..f9bc4fe36b
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/071-redboot_boardconfig.patch
@@ -0,0 +1,60 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -11,6 +11,8 @@
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+ 
++#define BOARD_CONFIG_PART		"boardconfig"
++
+ struct fis_image_desc {
+     unsigned char name[16];      // Null terminated name
+     uint32_t	  flash_base;    // Address within FLASH of image
+@@ -41,6 +43,7 @@ static int parse_redboot_partitions(stru
+                              struct mtd_partition **pparts,
+                              unsigned long fis_origin)
+ {
++	unsigned long max_offset = 0;
+ 	int nrparts = 0;
+ 	struct fis_image_desc *buf;
+ 	struct mtd_partition *parts;
+@@ -209,14 +212,14 @@ static int parse_redboot_partitions(stru
+ 		}
+ 	}
+ #endif
+-	parts = kzalloc(sizeof(*parts)*nrparts + nulllen + namelen, GFP_KERNEL);
++	parts = kzalloc(sizeof(*parts) * (nrparts + 1) + nulllen + namelen + sizeof(BOARD_CONFIG_PART), GFP_KERNEL);
+ 
+ 	if (!parts) {
+ 		ret = -ENOMEM;
+ 		goto out;
+ 	}
+ 
+-	nullname = (char *)&parts[nrparts];
++	nullname = (char *)&parts[nrparts + 1];
+ #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+ 	if (nulllen > 0) {
+ 		strcpy(nullname, nullstring);
+@@ -235,6 +238,8 @@ static int parse_redboot_partitions(stru
+ 	}
+ #endif
+ 	for ( ; i<nrparts; i++) {
++		if(max_offset < buf[i].flash_base + buf[i].size)
++			max_offset = buf[i].flash_base + buf[i].size;
+ 		parts[i].size = fl->img->size;
+ 		parts[i].offset = fl->img->flash_base;
+ 		parts[i].name = names;
+@@ -268,6 +273,14 @@ static int parse_redboot_partitions(stru
+ 		fl = fl->next;
+ 		kfree(tmp_fl);
+ 	}
++	if(master->size - max_offset >= master->erasesize)
++	{
++		parts[nrparts].size = master->size - max_offset;
++		parts[nrparts].offset = max_offset;
++		parts[nrparts].name = names;
++		strcpy(names, BOARD_CONFIG_PART);
++		nrparts++;
++	}
+ 	ret = nrparts;
+ 	*pparts = parts;
+  out:
diff --git a/target/linux/generic/patches-2.6.30/080-mtd_plat_nand_chip_fixup.patch b/target/linux/generic/patches-2.6.30/080-mtd_plat_nand_chip_fixup.patch
new file mode 100644
index 0000000000..8b6256af8f
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/080-mtd_plat_nand_chip_fixup.patch
@@ -0,0 +1,32 @@
+--- a/include/linux/mtd/nand.h
++++ b/include/linux/mtd/nand.h
+@@ -574,6 +574,7 @@ struct platform_nand_chip {
+ 	int			chip_delay;
+ 	unsigned int		options;
+ 	const char		**part_probe_types;
++	int			(*chip_fixup)(struct mtd_info *mtd);
+ 	void			*priv;
+ };
+ 
+--- a/drivers/mtd/nand/plat_nand.c
++++ b/drivers/mtd/nand/plat_nand.c
+@@ -71,7 +71,18 @@ static int __devinit plat_nand_probe(str
+ 	platform_set_drvdata(pdev, data);
+ 
+ 	/* Scan to find existance of the device */
+-	if (nand_scan(&data->mtd, 1)) {
++	if (nand_scan_ident(&data->mtd, 1)) {
++		res = -ENXIO;
++		goto out;
++	}
++
++	if (pdata->chip.chip_fixup) {
++		res = pdata->chip.chip_fixup(&data->mtd);
++		if (res)
++			goto out;
++	}
++
++	if (nand_scan_tail(&data->mtd)) {
+ 		res = -ENXIO;
+ 		goto out;
+ 	}
diff --git a/target/linux/generic/patches-2.6.30/081-mtd_myloader_partition_parser.patch b/target/linux/generic/patches-2.6.30/081-mtd_myloader_partition_parser.patch
new file mode 100644
index 0000000000..3ec97c6d8c
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/081-mtd_myloader_partition_parser.patch
@@ -0,0 +1,35 @@
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -180,6 +180,22 @@ config MTD_AR7_PARTS
+ 	---help---
+ 	  TI AR7 partitioning support
+ 
++config MTD_MYLOADER_PARTS
++	tristate "MyLoader partition parsing"
++	depends on MTD_PARTITIONS && (ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX)
++	---help---
++	  MyLoader is a bootloader which allows the user to define partitions
++	  in flash devices, by putting a table in the second erase block
++	  on the device, similar to a partition table. This table gives the 
++	  offsets and lengths of the user defined partitions.
++
++	  If you need code which can detect and parse these tables, and
++	  register MTD 'partitions' corresponding to each image detected,
++	  enable this option.
++
++	  You will still need the parsing functions to be called by the driver
++	  for your particular device. It won't happen automatically.
++
+ comment "User Modules And Translation Layers"
+ 
+ config MTD_CHAR
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdli
+ obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
+ obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
+ obj-$(CONFIG_MTD_OF_PARTS)      += ofpart.o
++obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+ 
+ # 'Users' - code which presents functionality to userspace.
+ obj-$(CONFIG_MTD_CHAR)		+= mtdchar.o
diff --git a/target/linux/generic/patches-2.6.30/090-mtd_fix_nand_correct_data_return_code.patch b/target/linux/generic/patches-2.6.30/090-mtd_fix_nand_correct_data_return_code.patch
new file mode 100644
index 0000000000..be2c7d7323
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/090-mtd_fix_nand_correct_data_return_code.patch
@@ -0,0 +1,12 @@
+--- a/drivers/mtd/nand/nand_ecc.c
++++ b/drivers/mtd/nand/nand_ecc.c
+@@ -492,8 +492,7 @@ int nand_correct_data(struct mtd_info *m
+ 	if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1)
+ 		return 1;	/* error in ecc data; no action needed */
+ 
+-	printk(KERN_ERR "uncorrectable error : ");
+-	return -1;
++	return -EBADMSG;
+ }
+ EXPORT_SYMBOL(nand_correct_data);
+ 
diff --git a/target/linux/generic/patches-2.6.30/100-netfilter_layer7_2.21.patch b/target/linux/generic/patches-2.6.30/100-netfilter_layer7_2.21.patch
new file mode 100644
index 0000000000..8100b1285c
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/100-netfilter_layer7_2.21.patch
@@ -0,0 +1,2132 @@
+--- /dev/null
++++ b/include/linux/netfilter/xt_layer7.h
+@@ -0,0 +1,13 @@
++#ifndef _XT_LAYER7_H
++#define _XT_LAYER7_H
++
++#define MAX_PATTERN_LEN 8192
++#define MAX_PROTOCOL_LEN 256
++
++struct xt_layer7_info {
++    char protocol[MAX_PROTOCOL_LEN];
++    char pattern[MAX_PATTERN_LEN];
++    u_int8_t invert;
++};
++
++#endif /* _XT_LAYER7_H */
+--- a/include/net/netfilter/nf_conntrack.h
++++ b/include/net/netfilter/nf_conntrack.h
+@@ -117,6 +117,22 @@ struct nf_conn {
+ 	u_int32_t secmark;
+ #endif
+ 
++#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || \
++    defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++	struct {
++		/*
++		 * e.g. "http". NULL before decision. "unknown" after decision
++		 * if no match.
++		 */
++		char *app_proto;
++		/*
++		 * application layer data so far. NULL after match decision.
++		 */
++		char *app_data;
++		unsigned int app_data_len;
++	} layer7;
++#endif
++
+ 	/* Storage reserved for other modules: */
+ 	union nf_conntrack_proto proto;
+ 
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -858,6 +858,27 @@ config NETFILTER_XT_MATCH_STATE
+ 
+ 	  To compile it as a module, choose M here.  If unsure, say N.
+ 
++config NETFILTER_XT_MATCH_LAYER7
++	tristate '"layer7" match support'
++	depends on NETFILTER_XTABLES
++	depends on EXPERIMENTAL && (IP_NF_CONNTRACK || NF_CONNTRACK)
++       depends on NF_CT_ACCT
++	help
++	  Say Y if you want to be able to classify connections (and their
++	  packets) based on regular expression matching of their application
++	  layer data.   This is one way to classify applications such as
++	  peer-to-peer filesharing systems that do not always use the same
++	  port.
++
++	  To compile it as a module, choose M here.  If unsure, say N.
++
++config NETFILTER_XT_MATCH_LAYER7_DEBUG
++        bool 'Layer 7 debugging output'
++        depends on NETFILTER_XT_MATCH_LAYER7
++        help
++          Say Y to get lots of debugging output.
++
++
+ config NETFILTER_XT_MATCH_STATISTIC
+ 	tristate '"statistic" match support'
+ 	depends on NETFILTER_ADVANCED
+--- a/net/netfilter/Makefile
++++ b/net/netfilter/Makefile
+@@ -88,6 +88,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_RECENT) 
+ obj-$(CONFIG_NETFILTER_XT_MATCH_SCTP) += xt_sctp.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_SOCKET) += xt_socket.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STATE) += xt_state.o
++obj-$(CONFIG_NETFILTER_XT_MATCH_LAYER7) += xt_layer7.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STATISTIC) += xt_statistic.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STRING) += xt_string.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_TCPMSS) += xt_tcpmss.o
+--- a/net/netfilter/nf_conntrack_core.c
++++ b/net/netfilter/nf_conntrack_core.c
+@@ -203,6 +203,14 @@ destroy_conntrack(struct nf_conntrack *n
+ 	 * too. */
+ 	nf_ct_remove_expectations(ct);
+ 
++	#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++	if(ct->layer7.app_proto)
++		kfree(ct->layer7.app_proto);
++	if(ct->layer7.app_data)
++	kfree(ct->layer7.app_data);
++	#endif
++
++
+ 	/* We overload first tuple to link into unconfirmed list. */
+ 	if (!nf_ct_is_confirmed(ct)) {
+ 		BUG_ON(hlist_nulls_unhashed(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode));
+--- a/net/netfilter/nf_conntrack_standalone.c
++++ b/net/netfilter/nf_conntrack_standalone.c
+@@ -171,6 +171,12 @@ static int ct_seq_show(struct seq_file *
+ 		goto release;
+ #endif
+ 
++#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++	if(ct->layer7.app_proto &&
++           seq_printf(s, "l7proto=%s ", ct->layer7.app_proto))
++		return -ENOSPC;
++#endif
++
+ 	if (seq_printf(s, "use=%u\n", atomic_read(&ct->ct_general.use)))
+ 		goto release;
+ 
+--- /dev/null
++++ b/net/netfilter/regexp/regexp.c
+@@ -0,0 +1,1197 @@
++/*
++ * regcomp and regexec -- regsub and regerror are elsewhere
++ * @(#)regexp.c	1.3 of 18 April 87
++ *
++ *	Copyright (c) 1986 by University of Toronto.
++ *	Written by Henry Spencer.  Not derived from licensed software.
++ *
++ *	Permission is granted to anyone to use this software for any
++ *	purpose on any computer system, and to redistribute it freely,
++ *	subject to the following restrictions:
++ *
++ *	1. The author is not responsible for the consequences of use of
++ *		this software, no matter how awful, even if they arise
++ *		from defects in it.
++ *
++ *	2. The origin of this software must not be misrepresented, either
++ *		by explicit claim or by omission.
++ *
++ *	3. Altered versions must be plainly marked as such, and must not
++ *		be misrepresented as being the original software.
++ *
++ * Beware that some of this code is subtly aware of the way operator
++ * precedence is structured in regular expressions.  Serious changes in
++ * regular-expression syntax might require a total rethink.
++ *
++ * This code was modified by Ethan Sommer to work within the kernel
++ * (it now uses kmalloc etc..)
++ *
++ * Modified slightly by Matthew Strait to use more modern C.
++ */
++
++#include "regexp.h"
++#include "regmagic.h"
++
++/* added by ethan and matt.  Lets it work in both kernel and user space.
++(So iptables can use it, for instance.)  Yea, it goes both ways... */
++#if __KERNEL__
++  #define malloc(foo) kmalloc(foo,GFP_ATOMIC)
++#else
++  #define printk(format,args...) printf(format,##args)
++#endif
++
++void regerror(char * s)
++{
++        printk("<3>Regexp: %s\n", s);
++        /* NOTREACHED */
++}
++
++/*
++ * The "internal use only" fields in regexp.h are present to pass info from
++ * compile to execute that permits the execute phase to run lots faster on
++ * simple cases.  They are:
++ *
++ * regstart	char that must begin a match; '\0' if none obvious
++ * reganch	is the match anchored (at beginning-of-line only)?
++ * regmust	string (pointer into program) that match must include, or NULL
++ * regmlen	length of regmust string
++ *
++ * Regstart and reganch permit very fast decisions on suitable starting points
++ * for a match, cutting down the work a lot.  Regmust permits fast rejection
++ * of lines that cannot possibly match.  The regmust tests are costly enough
++ * that regcomp() supplies a regmust only if the r.e. contains something
++ * potentially expensive (at present, the only such thing detected is * or +
++ * at the start of the r.e., which can involve a lot of backup).  Regmlen is
++ * supplied because the test in regexec() needs it and regcomp() is computing
++ * it anyway.
++ */
++
++/*
++ * Structure for regexp "program".  This is essentially a linear encoding
++ * of a nondeterministic finite-state machine (aka syntax charts or
++ * "railroad normal form" in parsing technology).  Each node is an opcode
++ * plus a "next" pointer, possibly plus an operand.  "Next" pointers of
++ * all nodes except BRANCH implement concatenation; a "next" pointer with
++ * a BRANCH on both ends of it is connecting two alternatives.  (Here we
++ * have one of the subtle syntax dependencies:  an individual BRANCH (as
++ * opposed to a collection of them) is never concatenated with anything
++ * because of operator precedence.)  The operand of some types of node is
++ * a literal string; for others, it is a node leading into a sub-FSM.  In
++ * particular, the operand of a BRANCH node is the first node of the branch.
++ * (NB this is *not* a tree structure:  the tail of the branch connects
++ * to the thing following the set of BRANCHes.)  The opcodes are:
++ */
++
++/* definition	number	opnd?	meaning */
++#define	END	0	/* no	End of program. */
++#define	BOL	1	/* no	Match "" at beginning of line. */
++#define	EOL	2	/* no	Match "" at end of line. */
++#define	ANY	3	/* no	Match any one character. */
++#define	ANYOF	4	/* str	Match any character in this string. */
++#define	ANYBUT	5	/* str	Match any character not in this string. */
++#define	BRANCH	6	/* node	Match this alternative, or the next... */
++#define	BACK	7	/* no	Match "", "next" ptr points backward. */
++#define	EXACTLY	8	/* str	Match this string. */
++#define	NOTHING	9	/* no	Match empty string. */
++#define	STAR	10	/* node	Match this (simple) thing 0 or more times. */
++#define	PLUS	11	/* node	Match this (simple) thing 1 or more times. */
++#define	OPEN	20	/* no	Mark this point in input as start of #n. */
++			/*	OPEN+1 is number 1, etc. */
++#define	CLOSE	30	/* no	Analogous to OPEN. */
++
++/*
++ * Opcode notes:
++ *
++ * BRANCH	The set of branches constituting a single choice are hooked
++ *		together with their "next" pointers, since precedence prevents
++ *		anything being concatenated to any individual branch.  The
++ *		"next" pointer of the last BRANCH in a choice points to the
++ *		thing following the whole choice.  This is also where the
++ *		final "next" pointer of each individual branch points; each
++ *		branch starts with the operand node of a BRANCH node.
++ *
++ * BACK		Normal "next" pointers all implicitly point forward; BACK
++ *		exists to make loop structures possible.
++ *
++ * STAR,PLUS	'?', and complex '*' and '+', are implemented as circular
++ *		BRANCH structures using BACK.  Simple cases (one character
++ *		per match) are implemented with STAR and PLUS for speed
++ *		and to minimize recursive plunges.
++ *
++ * OPEN,CLOSE	...are numbered at compile time.
++ */
++
++/*
++ * A node is one char of opcode followed by two chars of "next" pointer.
++ * "Next" pointers are stored as two 8-bit pieces, high order first.  The
++ * value is a positive offset from the opcode of the node containing it.
++ * An operand, if any, simply follows the node.  (Note that much of the
++ * code generation knows about this implicit relationship.)
++ *
++ * Using two bytes for the "next" pointer is vast overkill for most things,
++ * but allows patterns to get big without disasters.
++ */
++#define	OP(p)	(*(p))
++#define	NEXT(p)	(((*((p)+1)&0377)<<8) + (*((p)+2)&0377))
++#define	OPERAND(p)	((p) + 3)
++
++/*
++ * See regmagic.h for one further detail of program structure.
++ */
++
++
++/*
++ * Utility definitions.
++ */
++#ifndef CHARBITS
++#define	UCHARAT(p)	((int)*(unsigned char *)(p))
++#else
++#define	UCHARAT(p)	((int)*(p)&CHARBITS)
++#endif
++
++#define	FAIL(m)	{ regerror(m); return(NULL); }
++#define	ISMULT(c)	((c) == '*' || (c) == '+' || (c) == '?')
++#define	META	"^$.[()|?+*\\"
++
++/*
++ * Flags to be passed up and down.
++ */
++#define	HASWIDTH	01	/* Known never to match null string. */
++#define	SIMPLE		02	/* Simple enough to be STAR/PLUS operand. */
++#define	SPSTART		04	/* Starts with * or +. */
++#define	WORST		0	/* Worst case. */
++
++/*
++ * Global work variables for regcomp().
++ */
++struct match_globals {
++char *reginput;		/* String-input pointer. */
++char *regbol;		/* Beginning of input, for ^ check. */
++char **regstartp;	/* Pointer to startp array. */
++char **regendp;		/* Ditto for endp. */
++char *regparse;		/* Input-scan pointer. */
++int regnpar;		/* () count. */
++char regdummy;
++char *regcode;		/* Code-emit pointer; &regdummy = don't. */
++long regsize;		/* Code size. */
++};
++
++/*
++ * Forward declarations for regcomp()'s friends.
++ */
++#ifndef STATIC
++#define	STATIC	static
++#endif
++STATIC char *reg(struct match_globals *g, int paren,int *flagp);
++STATIC char *regbranch(struct match_globals *g, int *flagp);
++STATIC char *regpiece(struct match_globals *g, int *flagp);
++STATIC char *regatom(struct match_globals *g, int *flagp);
++STATIC char *regnode(struct match_globals *g, char op);
++STATIC char *regnext(struct match_globals *g, char *p);
++STATIC void regc(struct match_globals *g, char b);
++STATIC void reginsert(struct match_globals *g, char op, char *opnd);
++STATIC void regtail(struct match_globals *g, char *p, char *val);
++STATIC void regoptail(struct match_globals *g, char *p, char *val);
++
++
++__kernel_size_t my_strcspn(const char *s1,const char *s2)
++{
++        char *scan1;
++        char *scan2;
++        int count;
++
++        count = 0;
++        for (scan1 = (char *)s1; *scan1 != '\0'; scan1++) {
++                for (scan2 = (char *)s2; *scan2 != '\0';)       /* ++ moved down. */
++                        if (*scan1 == *scan2++)
++                                return(count);
++                count++;
++        }
++        return(count);
++}
++
++/*
++ - regcomp - compile a regular expression into internal code
++ *
++ * We can't allocate space until we know how big the compiled form will be,
++ * but we can't compile it (and thus know how big it is) until we've got a
++ * place to put the code.  So we cheat:  we compile it twice, once with code
++ * generation turned off and size counting turned on, and once "for real".
++ * This also means that we don't allocate space until we are sure that the
++ * thing really will compile successfully, and we never have to move the
++ * code and thus invalidate pointers into it.  (Note that it has to be in
++ * one piece because free() must be able to free it all.)
++ *
++ * Beware that the optimization-preparation code in here knows about some
++ * of the structure of the compiled regexp.
++ */
++regexp *
++regcomp(char *exp,int *patternsize)
++{
++	register regexp *r;
++	register char *scan;
++	register char *longest;
++	register int len;
++	int flags;
++	struct match_globals g;
++	
++	/* commented out by ethan
++	   extern char *malloc();
++	*/
++
++	if (exp == NULL)
++		FAIL("NULL argument");
++
++	/* First pass: determine size, legality. */
++	g.regparse = exp;
++	g.regnpar = 1;
++	g.regsize = 0L;
++	g.regcode = &g.regdummy;
++	regc(&g, MAGIC);
++	if (reg(&g, 0, &flags) == NULL)
++		return(NULL);
++
++	/* Small enough for pointer-storage convention? */
++	if (g.regsize >= 32767L)		/* Probably could be 65535L. */
++		FAIL("regexp too big");
++
++	/* Allocate space. */
++	*patternsize=sizeof(regexp) + (unsigned)g.regsize;
++	r = (regexp *)malloc(sizeof(regexp) + (unsigned)g.regsize);
++	if (r == NULL)
++		FAIL("out of space");
++
++	/* Second pass: emit code. */
++	g.regparse = exp;
++	g.regnpar = 1;
++	g.regcode = r->program;
++	regc(&g, MAGIC);
++	if (reg(&g, 0, &flags) == NULL)
++		return(NULL);
++
++	/* Dig out information for optimizations. */
++	r->regstart = '\0';	/* Worst-case defaults. */
++	r->reganch = 0;
++	r->regmust = NULL;
++	r->regmlen = 0;
++	scan = r->program+1;			/* First BRANCH. */
++	if (OP(regnext(&g, scan)) == END) {		/* Only one top-level choice. */
++		scan = OPERAND(scan);
++
++		/* Starting-point info. */
++		if (OP(scan) == EXACTLY)
++			r->regstart = *OPERAND(scan);
++		else if (OP(scan) == BOL)
++			r->reganch++;
++
++		/*
++		 * If there's something expensive in the r.e., find the
++		 * longest literal string that must appear and make it the
++		 * regmust.  Resolve ties in favor of later strings, since
++		 * the regstart check works with the beginning of the r.e.
++		 * and avoiding duplication strengthens checking.  Not a
++		 * strong reason, but sufficient in the absence of others.
++		 */
++		if (flags&SPSTART) {
++			longest = NULL;
++			len = 0;
++			for (; scan != NULL; scan = regnext(&g, scan))
++				if (OP(scan) == EXACTLY && strlen(OPERAND(scan)) >= len) {
++					longest = OPERAND(scan);
++					len = strlen(OPERAND(scan));
++				}
++			r->regmust = longest;
++			r->regmlen = len;
++		}
++	}
++
++	return(r);
++}
++
++/*
++ - reg - regular expression, i.e. main body or parenthesized thing
++ *
++ * Caller must absorb opening parenthesis.
++ *
++ * Combining parenthesis handling with the base level of regular expression
++ * is a trifle forced, but the need to tie the tails of the branches to what
++ * follows makes it hard to avoid.
++ */
++static char *
++reg(struct match_globals *g, int paren, int *flagp /* Parenthesized? */ )
++{
++	register char *ret;
++	register char *br;
++	register char *ender;
++	register int parno = 0; /* 0 makes gcc happy */
++	int flags;
++
++	*flagp = HASWIDTH;	/* Tentatively. */
++
++	/* Make an OPEN node, if parenthesized. */
++	if (paren) {
++		if (g->regnpar >= NSUBEXP)
++			FAIL("too many ()");
++		parno = g->regnpar;
++		g->regnpar++;
++		ret = regnode(g, OPEN+parno);
++	} else
++		ret = NULL;
++
++	/* Pick up the branches, linking them together. */
++	br = regbranch(g, &flags);
++	if (br == NULL)
++		return(NULL);
++	if (ret != NULL)
++		regtail(g, ret, br);	/* OPEN -> first. */
++	else
++		ret = br;
++	if (!(flags&HASWIDTH))
++		*flagp &= ~HASWIDTH;
++	*flagp |= flags&SPSTART;
++	while (*g->regparse == '|') {
++		g->regparse++;
++		br = regbranch(g, &flags);
++		if (br == NULL)
++			return(NULL);
++		regtail(g, ret, br);	/* BRANCH -> BRANCH. */
++		if (!(flags&HASWIDTH))
++			*flagp &= ~HASWIDTH;
++		*flagp |= flags&SPSTART;
++	}
++
++	/* Make a closing node, and hook it on the end. */
++	ender = regnode(g, (paren) ? CLOSE+parno : END);	
++	regtail(g, ret, ender);
++
++	/* Hook the tails of the branches to the closing node. */
++	for (br = ret; br != NULL; br = regnext(g, br))
++		regoptail(g, br, ender);
++
++	/* Check for proper termination. */
++	if (paren && *g->regparse++ != ')') {
++		FAIL("unmatched ()");
++	} else if (!paren && *g->regparse != '\0') {
++		if (*g->regparse == ')') {
++			FAIL("unmatched ()");
++		} else
++			FAIL("junk on end");	/* "Can't happen". */
++		/* NOTREACHED */
++	}
++
++	return(ret);
++}
++
++/*
++ - regbranch - one alternative of an | operator
++ *
++ * Implements the concatenation operator.
++ */
++static char *
++regbranch(struct match_globals *g, int *flagp)
++{
++	register char *ret;
++	register char *chain;
++	register char *latest;
++	int flags;
++
++	*flagp = WORST;		/* Tentatively. */
++
++	ret = regnode(g, BRANCH);
++	chain = NULL;
++	while (*g->regparse != '\0' && *g->regparse != '|' && *g->regparse != ')') {
++		latest = regpiece(g, &flags);
++		if (latest == NULL)
++			return(NULL);
++		*flagp |= flags&HASWIDTH;
++		if (chain == NULL)	/* First piece. */
++			*flagp |= flags&SPSTART;
++		else
++			regtail(g, chain, latest);
++		chain = latest;
++	}
++	if (chain == NULL)	/* Loop ran zero times. */
++		(void) regnode(g, NOTHING);
++
++	return(ret);
++}
++
++/*
++ - regpiece - something followed by possible [*+?]
++ *
++ * Note that the branching code sequences used for ? and the general cases
++ * of * and + are somewhat optimized:  they use the same NOTHING node as
++ * both the endmarker for their branch list and the body of the last branch.
++ * It might seem that this node could be dispensed with entirely, but the
++ * endmarker role is not redundant.
++ */
++static char *
++regpiece(struct match_globals *g, int *flagp)
++{
++	register char *ret;
++	register char op;
++	register char *next;
++	int flags;
++
++	ret = regatom(g, &flags);
++	if (ret == NULL)
++		return(NULL);
++
++	op = *g->regparse;
++	if (!ISMULT(op)) {
++		*flagp = flags;
++		return(ret);
++	}
++
++	if (!(flags&HASWIDTH) && op != '?')
++		FAIL("*+ operand could be empty");
++	*flagp = (op != '+') ? (WORST|SPSTART) : (WORST|HASWIDTH);
++
++	if (op == '*' && (flags&SIMPLE))
++		reginsert(g, STAR, ret);
++	else if (op == '*') {
++		/* Emit x* as (x&|), where & means "self". */
++		reginsert(g, BRANCH, ret);			/* Either x */
++		regoptail(g, ret, regnode(g, BACK));		/* and loop */
++		regoptail(g, ret, ret);			/* back */
++		regtail(g, ret, regnode(g, BRANCH));		/* or */
++		regtail(g, ret, regnode(g, NOTHING));		/* null. */
++	} else if (op == '+' && (flags&SIMPLE))
++		reginsert(g, PLUS, ret);
++	else if (op == '+') {
++		/* Emit x+ as x(&|), where & means "self". */
++		next = regnode(g, BRANCH);			/* Either */
++		regtail(g, ret, next);
++		regtail(g, regnode(g, BACK), ret);		/* loop back */
++		regtail(g, next, regnode(g, BRANCH));		/* or */
++		regtail(g, ret, regnode(g, NOTHING));		/* null. */
++	} else if (op == '?') {
++		/* Emit x? as (x|) */
++		reginsert(g, BRANCH, ret);			/* Either x */
++		regtail(g, ret, regnode(g, BRANCH));		/* or */
++		next = regnode(g, NOTHING);		/* null. */
++		regtail(g, ret, next);
++		regoptail(g, ret, next);
++	}
++	g->regparse++;
++	if (ISMULT(*g->regparse))
++		FAIL("nested *?+");
++
++	return(ret);
++}
++
++/*
++ - regatom - the lowest level
++ *
++ * Optimization:  gobbles an entire sequence of ordinary characters so that
++ * it can turn them into a single node, which is smaller to store and
++ * faster to run.  Backslashed characters are exceptions, each becoming a
++ * separate node; the code is simpler that way and it's not worth fixing.
++ */
++static char *
++regatom(struct match_globals *g, int *flagp)
++{
++	register char *ret;
++	int flags;
++
++	*flagp = WORST;		/* Tentatively. */
++
++	switch (*g->regparse++) {
++	case '^':
++		ret = regnode(g, BOL);
++		break;
++	case '$':
++		ret = regnode(g, EOL);
++		break;
++	case '.':
++		ret = regnode(g, ANY);
++		*flagp |= HASWIDTH|SIMPLE;
++		break;
++	case '[': {
++			register int class;
++			register int classend;
++
++			if (*g->regparse == '^') {	/* Complement of range. */
++				ret = regnode(g, ANYBUT);
++				g->regparse++;
++			} else
++				ret = regnode(g, ANYOF);
++			if (*g->regparse == ']' || *g->regparse == '-')
++				regc(g, *g->regparse++);
++			while (*g->regparse != '\0' && *g->regparse != ']') {
++				if (*g->regparse == '-') {
++					g->regparse++;
++					if (*g->regparse == ']' || *g->regparse == '\0')
++						regc(g, '-');
++					else {
++						class = UCHARAT(g->regparse-2)+1;
++						classend = UCHARAT(g->regparse);
++						if (class > classend+1)
++							FAIL("invalid [] range");
++						for (; class <= classend; class++)
++							regc(g, class);
++						g->regparse++;
++					}
++				} else
++					regc(g, *g->regparse++);
++			}
++			regc(g, '\0');
++			if (*g->regparse != ']')
++				FAIL("unmatched []");
++			g->regparse++;
++			*flagp |= HASWIDTH|SIMPLE;
++		}
++		break;
++	case '(':
++		ret = reg(g, 1, &flags);
++		if (ret == NULL)
++			return(NULL);
++		*flagp |= flags&(HASWIDTH|SPSTART);
++		break;
++	case '\0':
++	case '|':
++	case ')':
++		FAIL("internal urp");	/* Supposed to be caught earlier. */
++		break;
++	case '?':
++	case '+':
++	case '*':
++		FAIL("?+* follows nothing");
++		break;
++	case '\\':
++		if (*g->regparse == '\0')
++			FAIL("trailing \\");
++		ret = regnode(g, EXACTLY);
++		regc(g, *g->regparse++);
++		regc(g, '\0');
++		*flagp |= HASWIDTH|SIMPLE;
++		break;
++	default: {
++			register int len;
++			register char ender;
++
++			g->regparse--;
++			len = my_strcspn((const char *)g->regparse, (const char *)META);
++			if (len <= 0)
++				FAIL("internal disaster");
++			ender = *(g->regparse+len);
++			if (len > 1 && ISMULT(ender))
++				len--;		/* Back off clear of ?+* operand. */
++			*flagp |= HASWIDTH;
++			if (len == 1)
++				*flagp |= SIMPLE;
++			ret = regnode(g, EXACTLY);
++			while (len > 0) {
++				regc(g, *g->regparse++);
++				len--;
++			}
++			regc(g, '\0');
++		}
++		break;
++	}
++
++	return(ret);
++}
++
++/*
++ - regnode - emit a node
++ */
++static char *			/* Location. */
++regnode(struct match_globals *g, char op)
++{
++	register char *ret;
++	register char *ptr;
++
++	ret = g->regcode;
++	if (ret == &g->regdummy) {
++		g->regsize += 3;
++		return(ret);
++	}
++
++	ptr = ret;
++	*ptr++ = op;
++	*ptr++ = '\0';		/* Null "next" pointer. */
++	*ptr++ = '\0';
++	g->regcode = ptr;
++
++	return(ret);
++}
++
++/*
++ - regc - emit (if appropriate) a byte of code
++ */
++static void
++regc(struct match_globals *g, char b)
++{
++	if (g->regcode != &g->regdummy)
++		*g->regcode++ = b;
++	else
++		g->regsize++;
++}
++
++/*
++ - reginsert - insert an operator in front of already-emitted operand
++ *
++ * Means relocating the operand.
++ */
++static void
++reginsert(struct match_globals *g, char op, char* opnd)
++{
++	register char *src;
++	register char *dst;
++	register char *place;
++
++	if (g->regcode == &g->regdummy) {
++		g->regsize += 3;
++		return;
++	}
++
++	src = g->regcode;
++	g->regcode += 3;
++	dst = g->regcode;
++	while (src > opnd)
++		*--dst = *--src;
++
++	place = opnd;		/* Op node, where operand used to be. */
++	*place++ = op;
++	*place++ = '\0';
++	*place++ = '\0';
++}
++
++/*
++ - regtail - set the next-pointer at the end of a node chain
++ */
++static void
++regtail(struct match_globals *g, char *p, char *val)
++{
++	register char *scan;
++	register char *temp;
++	register int offset;
++
++	if (p == &g->regdummy)
++		return;
++
++	/* Find last node. */
++	scan = p;
++	for (;;) {
++		temp = regnext(g, scan);
++		if (temp == NULL)
++			break;
++		scan = temp;
++	}
++
++	if (OP(scan) == BACK)
++		offset = scan - val;
++	else
++		offset = val - scan;
++	*(scan+1) = (offset>>8)&0377;
++	*(scan+2) = offset&0377;
++}
++
++/*
++ - regoptail - regtail on operand of first argument; nop if operandless
++ */
++static void
++regoptail(struct match_globals *g, char *p, char *val)
++{
++	/* "Operandless" and "op != BRANCH" are synonymous in practice. */
++	if (p == NULL || p == &g->regdummy || OP(p) != BRANCH)
++		return;
++	regtail(g, OPERAND(p), val);
++}
++
++/*
++ * regexec and friends
++ */
++
++
++/*
++ * Forwards.
++ */
++STATIC int regtry(struct match_globals *g, regexp *prog, char *string);
++STATIC int regmatch(struct match_globals *g, char *prog);
++STATIC int regrepeat(struct match_globals *g, char *p);
++
++#ifdef DEBUG
++int regnarrate = 0;
++void regdump();
++STATIC char *regprop(char *op);
++#endif
++
++/*
++ - regexec - match a regexp against a string
++ */
++int
++regexec(regexp *prog, char *string)
++{
++	register char *s;
++	struct match_globals g;
++
++	/* Be paranoid... */
++	if (prog == NULL || string == NULL) {
++		printk("<3>Regexp: NULL parameter\n");
++		return(0);
++	}
++
++	/* Check validity of program. */
++	if (UCHARAT(prog->program) != MAGIC) {
++		printk("<3>Regexp: corrupted program\n");
++		return(0);
++	}
++
++	/* If there is a "must appear" string, look for it. */
++	if (prog->regmust != NULL) {
++		s = string;
++		while ((s = strchr(s, prog->regmust[0])) != NULL) {
++			if (strncmp(s, prog->regmust, prog->regmlen) == 0)
++				break;	/* Found it. */
++			s++;
++		}
++		if (s == NULL)	/* Not present. */
++			return(0);
++	}
++
++	/* Mark beginning of line for ^ . */
++	g.regbol = string;
++
++	/* Simplest case:  anchored match need be tried only once. */
++	if (prog->reganch)
++		return(regtry(&g, prog, string));
++
++	/* Messy cases:  unanchored match. */
++	s = string;
++	if (prog->regstart != '\0')
++		/* We know what char it must start with. */
++		while ((s = strchr(s, prog->regstart)) != NULL) {
++			if (regtry(&g, prog, s))
++				return(1);
++			s++;
++		}
++	else
++		/* We don't -- general case. */
++		do {
++			if (regtry(&g, prog, s))
++				return(1);
++		} while (*s++ != '\0');
++
++	/* Failure. */
++	return(0);
++}
++
++/*
++ - regtry - try match at specific point
++ */
++static int			/* 0 failure, 1 success */
++regtry(struct match_globals *g, regexp *prog, char *string)
++{
++	register int i;
++	register char **sp;
++	register char **ep;
++
++	g->reginput = string;
++	g->regstartp = prog->startp;
++	g->regendp = prog->endp;
++
++	sp = prog->startp;
++	ep = prog->endp;
++	for (i = NSUBEXP; i > 0; i--) {
++		*sp++ = NULL;
++		*ep++ = NULL;
++	}
++	if (regmatch(g, prog->program + 1)) {
++		prog->startp[0] = string;
++		prog->endp[0] = g->reginput;
++		return(1);
++	} else
++		return(0);
++}
++
++/*
++ - regmatch - main matching routine
++ *
++ * Conceptually the strategy is simple:  check to see whether the current
++ * node matches, call self recursively to see whether the rest matches,
++ * and then act accordingly.  In practice we make some effort to avoid
++ * recursion, in particular by going through "ordinary" nodes (that don't
++ * need to know whether the rest of the match failed) by a loop instead of
++ * by recursion.
++ */
++static int			/* 0 failure, 1 success */
++regmatch(struct match_globals *g, char *prog)
++{
++	register char *scan = prog; /* Current node. */
++	char *next;		    /* Next node. */
++
++#ifdef DEBUG
++	if (scan != NULL && regnarrate)
++		fprintf(stderr, "%s(\n", regprop(scan));
++#endif
++	while (scan != NULL) {
++#ifdef DEBUG
++		if (regnarrate)
++			fprintf(stderr, "%s...\n", regprop(scan));
++#endif
++		next = regnext(g, scan);
++
++		switch (OP(scan)) {
++		case BOL:
++			if (g->reginput != g->regbol)
++				return(0);
++			break;
++		case EOL:
++			if (*g->reginput != '\0')
++				return(0);
++			break;
++		case ANY:
++			if (*g->reginput == '\0')
++				return(0);
++			g->reginput++;
++			break;
++		case EXACTLY: {
++				register int len;
++				register char *opnd;
++
++				opnd = OPERAND(scan);
++				/* Inline the first character, for speed. */
++				if (*opnd != *g->reginput)
++					return(0);
++				len = strlen(opnd);
++				if (len > 1 && strncmp(opnd, g->reginput, len) != 0)
++					return(0);
++				g->reginput += len;
++			}
++			break;
++		case ANYOF:
++			if (*g->reginput == '\0' || strchr(OPERAND(scan), *g->reginput) == NULL)
++				return(0);
++			g->reginput++;
++			break;
++		case ANYBUT:
++			if (*g->reginput == '\0' || strchr(OPERAND(scan), *g->reginput) != NULL)
++				return(0);
++			g->reginput++;
++			break;
++		case NOTHING:
++		case BACK:
++			break;
++		case OPEN+1:
++		case OPEN+2:
++		case OPEN+3:
++		case OPEN+4:
++		case OPEN+5:
++		case OPEN+6:
++		case OPEN+7:
++		case OPEN+8:
++		case OPEN+9: {
++				register int no;
++				register char *save;
++
++				no = OP(scan) - OPEN;
++				save = g->reginput;
++
++				if (regmatch(g, next)) {
++					/*
++					 * Don't set startp if some later
++					 * invocation of the same parentheses
++					 * already has.
++					 */
++					if (g->regstartp[no] == NULL)
++						g->regstartp[no] = save;
++					return(1);
++				} else
++					return(0);
++			}
++			break;
++		case CLOSE+1:
++		case CLOSE+2:
++		case CLOSE+3:
++		case CLOSE+4:
++		case CLOSE+5:
++		case CLOSE+6:
++		case CLOSE+7:
++		case CLOSE+8:
++		case CLOSE+9:
++			{
++				register int no;
++				register char *save;
++
++				no = OP(scan) - CLOSE;
++				save = g->reginput;
++
++				if (regmatch(g, next)) {
++					/*
++					 * Don't set endp if some later
++					 * invocation of the same parentheses
++					 * already has.
++					 */
++					if (g->regendp[no] == NULL)
++						g->regendp[no] = save;
++					return(1);
++				} else
++					return(0);
++			}
++			break;
++		case BRANCH: {
++				register char *save;
++
++				if (OP(next) != BRANCH)		/* No choice. */
++					next = OPERAND(scan);	/* Avoid recursion. */
++				else {
++					do {
++						save = g->reginput;
++						if (regmatch(g, OPERAND(scan)))
++							return(1);
++						g->reginput = save;
++						scan = regnext(g, scan);
++					} while (scan != NULL && OP(scan) == BRANCH);
++					return(0);
++					/* NOTREACHED */
++				}
++			}
++			break;
++		case STAR:
++		case PLUS: {
++				register char nextch;
++				register int no;
++				register char *save;
++				register int min;
++
++				/*
++				 * Lookahead to avoid useless match attempts
++				 * when we know what character comes next.
++				 */
++				nextch = '\0';
++				if (OP(next) == EXACTLY)
++					nextch = *OPERAND(next);
++				min = (OP(scan) == STAR) ? 0 : 1;
++				save = g->reginput;
++				no = regrepeat(g, OPERAND(scan));
++				while (no >= min) {
++					/* If it could work, try it. */
++					if (nextch == '\0' || *g->reginput == nextch)
++						if (regmatch(g, next))
++							return(1);
++					/* Couldn't or didn't -- back up. */
++					no--;
++					g->reginput = save + no;
++				}
++				return(0);
++			}
++			break;
++		case END:
++			return(1);	/* Success! */
++			break;
++		default:
++			printk("<3>Regexp: memory corruption\n");
++			return(0);
++			break;
++		}
++
++		scan = next;
++	}
++
++	/*
++	 * We get here only if there's trouble -- normally "case END" is
++	 * the terminating point.
++	 */
++	printk("<3>Regexp: corrupted pointers\n");
++	return(0);
++}
++
++/*
++ - regrepeat - repeatedly match something simple, report how many
++ */
++static int
++regrepeat(struct match_globals *g, char *p)
++{
++	register int count = 0;
++	register char *scan;
++	register char *opnd;
++
++	scan = g->reginput;
++	opnd = OPERAND(p);
++	switch (OP(p)) {
++	case ANY:
++		count = strlen(scan);
++		scan += count;
++		break;
++	case EXACTLY:
++		while (*opnd == *scan) {
++			count++;
++			scan++;
++		}
++		break;
++	case ANYOF:
++		while (*scan != '\0' && strchr(opnd, *scan) != NULL) {
++			count++;
++			scan++;
++		}
++		break;
++	case ANYBUT:
++		while (*scan != '\0' && strchr(opnd, *scan) == NULL) {
++			count++;
++			scan++;
++		}
++		break;
++	default:		/* Oh dear.  Called inappropriately. */
++		printk("<3>Regexp: internal foulup\n");
++		count = 0;	/* Best compromise. */
++		break;
++	}
++	g->reginput = scan;
++
++	return(count);
++}
++
++/*
++ - regnext - dig the "next" pointer out of a node
++ */
++static char*
++regnext(struct match_globals *g, char *p)
++{
++	register int offset;
++
++	if (p == &g->regdummy)
++		return(NULL);
++
++	offset = NEXT(p);
++	if (offset == 0)
++		return(NULL);
++
++	if (OP(p) == BACK)
++		return(p-offset);
++	else
++		return(p+offset);
++}
++
++#ifdef DEBUG
++
++STATIC char *regprop();
++
++/*
++ - regdump - dump a regexp onto stdout in vaguely comprehensible form
++ */
++void
++regdump(regexp *r)
++{
++	register char *s;
++	register char op = EXACTLY;	/* Arbitrary non-END op. */
++	register char *next;
++	/* extern char *strchr(); */
++
++
++	s = r->program + 1;
++	while (op != END) {	/* While that wasn't END last time... */
++		op = OP(s);
++		printf("%2d%s", s-r->program, regprop(s));	/* Where, what. */
++		next = regnext(s);
++		if (next == NULL)		/* Next ptr. */
++			printf("(0)");
++		else
++			printf("(%d)", (s-r->program)+(next-s));
++		s += 3;
++		if (op == ANYOF || op == ANYBUT || op == EXACTLY) {
++			/* Literal string, where present. */
++			while (*s != '\0') {
++				putchar(*s);
++				s++;
++			}
++			s++;
++		}
++		putchar('\n');
++	}
++
++	/* Header fields of interest. */
++	if (r->regstart != '\0')
++		printf("start `%c' ", r->regstart);
++	if (r->reganch)
++		printf("anchored ");
++	if (r->regmust != NULL)
++		printf("must have \"%s\"", r->regmust);
++	printf("\n");
++}
++
++/*
++ - regprop - printable representation of opcode
++ */
++static char *
++regprop(char *op)
++{
++#define BUFLEN 50
++	register char *p;
++	static char buf[BUFLEN];
++
++	strcpy(buf, ":");
++
++	switch (OP(op)) {
++	case BOL:
++		p = "BOL";
++		break;
++	case EOL:
++		p = "EOL";
++		break;
++	case ANY:
++		p = "ANY";
++		break;
++	case ANYOF:
++		p = "ANYOF";
++		break;
++	case ANYBUT:
++		p = "ANYBUT";
++		break;
++	case BRANCH:
++		p = "BRANCH";
++		break;
++	case EXACTLY:
++		p = "EXACTLY";
++		break;
++	case NOTHING:
++		p = "NOTHING";
++		break;
++	case BACK:
++		p = "BACK";
++		break;
++	case END:
++		p = "END";
++		break;
++	case OPEN+1:
++	case OPEN+2:
++	case OPEN+3:
++	case OPEN+4:
++	case OPEN+5:
++	case OPEN+6:
++	case OPEN+7:
++	case OPEN+8:
++	case OPEN+9:
++		snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "OPEN%d", OP(op)-OPEN);
++		p = NULL;
++		break;
++	case CLOSE+1:
++	case CLOSE+2:
++	case CLOSE+3:
++	case CLOSE+4:
++	case CLOSE+5:
++	case CLOSE+6:
++	case CLOSE+7:
++	case CLOSE+8:
++	case CLOSE+9:
++		snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "CLOSE%d", OP(op)-CLOSE);
++		p = NULL;
++		break;
++	case STAR:
++		p = "STAR";
++		break;
++	case PLUS:
++		p = "PLUS";
++		break;
++	default:
++		printk("<3>Regexp: corrupted opcode\n");
++		break;
++	}
++	if (p != NULL)
++		strncat(buf, p, BUFLEN-strlen(buf));
++	return(buf);
++}
++#endif
++
++
+--- /dev/null
++++ b/net/netfilter/regexp/regexp.h
+@@ -0,0 +1,41 @@
++/*
++ * Definitions etc. for regexp(3) routines.
++ *
++ * Caveat:  this is V8 regexp(3) [actually, a reimplementation thereof],
++ * not the System V one.
++ */
++
++#ifndef REGEXP_H
++#define REGEXP_H
++
++
++/*
++http://www.opensource.apple.com/darwinsource/10.3/expect-1/expect/expect.h ,
++which contains a version of this library, says:
++
++ *
++ * NSUBEXP must be at least 10, and no greater than 117 or the parser
++ * will not work properly.
++ *
++
++However, it looks rather like this library is limited to 10.  If you think
++otherwise, let us know.
++*/
++
++#define NSUBEXP  10
++typedef struct regexp {
++	char *startp[NSUBEXP];
++	char *endp[NSUBEXP];
++	char regstart;		/* Internal use only. */
++	char reganch;		/* Internal use only. */
++	char *regmust;		/* Internal use only. */
++	int regmlen;		/* Internal use only. */
++	char program[1];	/* Unwarranted chumminess with compiler. */
++} regexp;
++
++regexp * regcomp(char *exp, int *patternsize);
++int regexec(regexp *prog, char *string);
++void regsub(regexp *prog, char *source, char *dest);
++void regerror(char *s);
++
++#endif
+--- /dev/null
++++ b/net/netfilter/regexp/regmagic.h
+@@ -0,0 +1,5 @@
++/*
++ * The first byte of the regexp internal "program" is actually this magic
++ * number; the start node begins in the second byte.
++ */
++#define	MAGIC	0234
+--- /dev/null
++++ b/net/netfilter/regexp/regsub.c
+@@ -0,0 +1,95 @@
++/*
++ * regsub
++ * @(#)regsub.c	1.3 of 2 April 86
++ *
++ *	Copyright (c) 1986 by University of Toronto.
++ *	Written by Henry Spencer.  Not derived from licensed software.
++ *
++ *	Permission is granted to anyone to use this software for any
++ *	purpose on any computer system, and to redistribute it freely,
++ *	subject to the following restrictions:
++ *
++ *	1. The author is not responsible for the consequences of use of
++ *		this software, no matter how awful, even if they arise
++ *		from defects in it.
++ *
++ *	2. The origin of this software must not be misrepresented, either
++ *		by explicit claim or by omission.
++ *
++ *	3. Altered versions must be plainly marked as such, and must not
++ *		be misrepresented as being the original software.
++ *
++ *
++ * This code was modified by Ethan Sommer to work within the kernel
++ * (it now uses kmalloc etc..)
++ *
++ */
++#include "regexp.h"
++#include "regmagic.h"
++#include <linux/string.h>
++
++
++#ifndef CHARBITS
++#define	UCHARAT(p)	((int)*(unsigned char *)(p))
++#else
++#define	UCHARAT(p)	((int)*(p)&CHARBITS)
++#endif
++
++#if 0
++//void regerror(char * s)
++//{
++//        printk("regexp(3): %s", s);
++//        /* NOTREACHED */
++//}
++#endif
++
++/*
++ - regsub - perform substitutions after a regexp match
++ */
++void
++regsub(regexp * prog, char * source, char * dest)
++{
++	register char *src;
++	register char *dst;
++	register char c;
++	register int no;
++	register int len;
++	
++	/* Not necessary and gcc doesn't like it -MLS */
++	/*extern char *strncpy();*/
++
++	if (prog == NULL || source == NULL || dest == NULL) {
++		regerror("NULL parm to regsub");
++		return;
++	}
++	if (UCHARAT(prog->program) != MAGIC) {
++		regerror("damaged regexp fed to regsub");
++		return;
++	}
++
++	src = source;
++	dst = dest;
++	while ((c = *src++) != '\0') {
++		if (c == '&')
++			no = 0;
++		else if (c == '\\' && '0' <= *src && *src <= '9')
++			no = *src++ - '0';
++		else
++			no = -1;
++
++		if (no < 0) {	/* Ordinary character. */
++			if (c == '\\' && (*src == '\\' || *src == '&'))
++				c = *src++;
++			*dst++ = c;
++		} else if (prog->startp[no] != NULL && prog->endp[no] != NULL) {
++			len = prog->endp[no] - prog->startp[no];
++			(void) strncpy(dst, prog->startp[no], len);
++			dst += len;
++			if (len != 0 && *(dst-1) == '\0') {	/* strncpy hit NUL. */
++				regerror("damaged match string");
++				return;
++			}
++		}
++	}
++	*dst++ = '\0';
++}
+--- /dev/null
++++ b/net/netfilter/xt_layer7.c
+@@ -0,0 +1,666 @@
++/*
++  Kernel module to match application layer (OSI layer 7) data in connections.
++
++  http://l7-filter.sf.net
++
++  (C) 2003-2009 Matthew Strait and Ethan Sommer.
++
++  This program is free software; you can redistribute it and/or
++  modify it under the terms of the GNU General Public License
++  as published by the Free Software Foundation; either version
++  2 of the License, or (at your option) any later version.
++  http://www.gnu.org/licenses/gpl.txt
++
++  Based on ipt_string.c (C) 2000 Emmanuel Roger <winfield@freegates.be>,
++  xt_helper.c (C) 2002 Harald Welte and cls_layer7.c (C) 2003 Matthew Strait,
++  Ethan Sommer, Justin Levandoski.
++*/
++
++#include <linux/spinlock.h>
++#include <linux/version.h>
++#include <net/ip.h>
++#include <net/tcp.h>
++#include <linux/module.h>
++#include <linux/skbuff.h>
++#include <linux/netfilter.h>
++#include <net/netfilter/nf_conntrack.h>
++#include <net/netfilter/nf_conntrack_core.h>
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)
++#include <net/netfilter/nf_conntrack_extend.h>
++#include <net/netfilter/nf_conntrack_acct.h>
++#endif
++#include <linux/netfilter/x_tables.h>
++#include <linux/netfilter/xt_layer7.h>
++#include <linux/ctype.h>
++#include <linux/proc_fs.h>
++
++#include "regexp/regexp.c"
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Matthew Strait <quadong@users.sf.net>, Ethan Sommer <sommere@users.sf.net>");
++MODULE_DESCRIPTION("iptables application layer match module");
++MODULE_ALIAS("ipt_layer7");
++MODULE_VERSION("2.21");
++
++static int maxdatalen = 2048; // this is the default
++module_param(maxdatalen, int, 0444);
++MODULE_PARM_DESC(maxdatalen, "maximum bytes of data looked at by l7-filter");
++#ifdef CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG
++	#define DPRINTK(format,args...) printk(format,##args)
++#else
++	#define DPRINTK(format,args...)
++#endif
++
++/* Number of packets whose data we look at.
++This can be modified through /proc/net/layer7_numpackets */
++static int num_packets = 10;
++
++static struct pattern_cache {
++	char * regex_string;
++	regexp * pattern;
++	struct pattern_cache * next;
++} * first_pattern_cache = NULL;
++
++DEFINE_SPINLOCK(l7_lock);
++
++static int total_acct_packets(struct nf_conn *ct)
++{
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 26)
++	BUG_ON(ct == NULL);
++	return (ct->counters[IP_CT_DIR_ORIGINAL].packets + ct->counters[IP_CT_DIR_REPLY].packets);
++#else
++	struct nf_conn_counter *acct;
++
++	BUG_ON(ct == NULL);
++	acct = nf_conn_acct_find(ct);
++	if (!acct)
++		return 0;
++	return (acct[IP_CT_DIR_ORIGINAL].packets + acct[IP_CT_DIR_REPLY].packets);
++#endif
++}
++
++#ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG
++/* Converts an unfriendly string into a friendly one by
++replacing unprintables with periods and all whitespace with " ". */
++static char * friendly_print(unsigned char * s)
++{
++	char * f = kmalloc(strlen(s) + 1, GFP_ATOMIC);
++	int i;
++
++	if(!f) {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory in "
++					"friendly_print, bailing.\n");
++		return NULL;
++	}
++
++	for(i = 0; i < strlen(s); i++){
++		if(isprint(s[i]) && s[i] < 128)	f[i] = s[i];
++		else if(isspace(s[i]))		f[i] = ' ';
++		else 				f[i] = '.';
++	}
++	f[i] = '\0';
++	return f;
++}
++
++static char dec2hex(int i)
++{
++	switch (i) {
++		case 0 ... 9:
++			return (i + '0');
++			break;
++		case 10 ... 15:
++			return (i - 10 + 'a');
++			break;
++		default:
++			if (net_ratelimit())
++				printk("layer7: Problem in dec2hex\n");
++			return '\0';
++	}
++}
++
++static char * hex_print(unsigned char * s)
++{
++	char * g = kmalloc(strlen(s)*3 + 1, GFP_ATOMIC);
++	int i;
++
++	if(!g) {
++	       if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory in hex_print, "
++					"bailing.\n");
++	       return NULL;
++	}
++
++	for(i = 0; i < strlen(s); i++) {
++		g[i*3    ] = dec2hex(s[i]/16);
++		g[i*3 + 1] = dec2hex(s[i]%16);
++		g[i*3 + 2] = ' ';
++	}
++	g[i*3] = '\0';
++
++	return g;
++}
++#endif // DEBUG
++
++/* Use instead of regcomp.  As we expect to be seeing the same regexps over and
++over again, it make sense to cache the results. */
++static regexp * compile_and_cache(const char * regex_string, 
++                                  const char * protocol)
++{
++	struct pattern_cache * node               = first_pattern_cache;
++	struct pattern_cache * last_pattern_cache = first_pattern_cache;
++	struct pattern_cache * tmp;
++	unsigned int len;
++
++	while (node != NULL) {
++		if (!strcmp(node->regex_string, regex_string))
++		return node->pattern;
++
++		last_pattern_cache = node;/* points at the last non-NULL node */
++		node = node->next;
++	}
++
++	/* If we reach the end of the list, then we have not yet cached
++	   the pattern for this regex. Let's do that now.
++	   Be paranoid about running out of memory to avoid list corruption. */
++	tmp = kmalloc(sizeof(struct pattern_cache), GFP_ATOMIC);
++
++	if(!tmp) {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory in "
++					"compile_and_cache, bailing.\n");
++		return NULL;
++	}
++
++	tmp->regex_string  = kmalloc(strlen(regex_string) + 1, GFP_ATOMIC);
++	tmp->pattern       = kmalloc(sizeof(struct regexp),    GFP_ATOMIC);
++	tmp->next = NULL;
++
++	if(!tmp->regex_string || !tmp->pattern) {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory in "
++					"compile_and_cache, bailing.\n");
++		kfree(tmp->regex_string);
++		kfree(tmp->pattern);
++		kfree(tmp);
++		return NULL;
++	}
++
++	/* Ok.  The new node is all ready now. */
++	node = tmp;
++
++	if(first_pattern_cache == NULL) /* list is empty */
++		first_pattern_cache = node; /* make node the beginning */
++	else
++		last_pattern_cache->next = node; /* attach node to the end */
++
++	/* copy the string and compile the regex */
++	len = strlen(regex_string);
++	DPRINTK("About to compile this: \"%s\"\n", regex_string);
++	node->pattern = regcomp((char *)regex_string, &len);
++	if ( !node->pattern ) {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: Error compiling regexp "
++					"\"%s\" (%s)\n", 
++					regex_string, protocol);
++		/* pattern is now cached as NULL, so we won't try again. */
++	}
++
++	strcpy(node->regex_string, regex_string);
++	return node->pattern;
++}
++
++static int can_handle(const struct sk_buff *skb)
++{
++	if(!ip_hdr(skb)) /* not IP */
++		return 0;
++	if(ip_hdr(skb)->protocol != IPPROTO_TCP &&
++	   ip_hdr(skb)->protocol != IPPROTO_UDP &&
++	   ip_hdr(skb)->protocol != IPPROTO_ICMP)
++		return 0;
++	return 1;
++}
++
++/* Returns offset the into the skb->data that the application data starts */
++static int app_data_offset(const struct sk_buff *skb)
++{
++	/* In case we are ported somewhere (ebtables?) where ip_hdr(skb)
++	isn't set, this can be gotten from 4*(skb->data[0] & 0x0f) as well. */
++	int ip_hl = 4*ip_hdr(skb)->ihl;
++
++	if( ip_hdr(skb)->protocol == IPPROTO_TCP ) {
++		/* 12 == offset into TCP header for the header length field.
++		Can't get this with skb->h.th->doff because the tcphdr
++		struct doesn't get set when routing (this is confirmed to be
++		true in Netfilter as well as QoS.) */
++		int tcp_hl = 4*(skb->data[ip_hl + 12] >> 4);
++
++		return ip_hl + tcp_hl;
++	} else if( ip_hdr(skb)->protocol == IPPROTO_UDP  ) {
++		return ip_hl + 8; /* UDP header is always 8 bytes */
++	} else if( ip_hdr(skb)->protocol == IPPROTO_ICMP ) {
++		return ip_hl + 8; /* ICMP header is 8 bytes */
++	} else {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: tried to handle unknown "
++					"protocol!\n");
++		return ip_hl + 8; /* something reasonable */
++	}
++}
++
++/* handles whether there's a match when we aren't appending data anymore */
++static int match_no_append(struct nf_conn * conntrack, 
++                           struct nf_conn * master_conntrack, 
++                           enum ip_conntrack_info ctinfo,
++                           enum ip_conntrack_info master_ctinfo,
++                           const struct xt_layer7_info * info)
++{
++	/* If we're in here, throw the app data away */
++	if(master_conntrack->layer7.app_data != NULL) {
++
++	#ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG
++		if(!master_conntrack->layer7.app_proto) {
++			char * f = 
++			  friendly_print(master_conntrack->layer7.app_data);
++			char * g = 
++			  hex_print(master_conntrack->layer7.app_data);
++			DPRINTK("\nl7-filter gave up after %d bytes "
++				"(%d packets):\n%s\n",
++				strlen(f), total_acct_packets(master_conntrack), f);
++			kfree(f);
++			DPRINTK("In hex: %s\n", g);
++			kfree(g);
++		}
++	#endif
++
++		kfree(master_conntrack->layer7.app_data);
++		master_conntrack->layer7.app_data = NULL; /* don't free again */
++	}
++
++	if(master_conntrack->layer7.app_proto){
++		/* Here child connections set their .app_proto (for /proc) */
++		if(!conntrack->layer7.app_proto) {
++			conntrack->layer7.app_proto = 
++			  kmalloc(strlen(master_conntrack->layer7.app_proto)+1, 
++			    GFP_ATOMIC);
++			if(!conntrack->layer7.app_proto){
++				if (net_ratelimit())
++					printk(KERN_ERR "layer7: out of memory "
++							"in match_no_append, "
++							"bailing.\n");
++				return 1;
++			}
++			strcpy(conntrack->layer7.app_proto, 
++				master_conntrack->layer7.app_proto);
++		}
++
++		return (!strcmp(master_conntrack->layer7.app_proto, 
++				info->protocol));
++	}
++	else {
++		/* If not classified, set to "unknown" to distinguish from
++		connections that are still being tested. */
++		master_conntrack->layer7.app_proto = 
++			kmalloc(strlen("unknown")+1, GFP_ATOMIC);
++		if(!master_conntrack->layer7.app_proto){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: out of memory in "
++						"match_no_append, bailing.\n");
++			return 1;
++		}
++		strcpy(master_conntrack->layer7.app_proto, "unknown");
++		return 0;
++	}
++}
++
++/* add the new app data to the conntrack.  Return number of bytes added. */
++static int add_data(struct nf_conn * master_conntrack,
++                    char * app_data, int appdatalen)
++{
++	int length = 0, i;
++	int oldlength = master_conntrack->layer7.app_data_len;
++
++	/* This is a fix for a race condition by Deti Fliegl. However, I'm not 
++	   clear on whether the race condition exists or whether this really 
++	   fixes it.  I might just be being dense... Anyway, if it's not really 
++	   a fix, all it does is waste a very small amount of time. */
++	if(!master_conntrack->layer7.app_data) return 0;
++
++	/* Strip nulls. Make everything lower case (our regex lib doesn't
++	do case insensitivity).  Add it to the end of the current data. */
++	for(i = 0; i < maxdatalen-oldlength-1 &&
++		   i < appdatalen; i++) {
++		if(app_data[i] != '\0') {
++			/* the kernel version of tolower mungs 'upper ascii' */
++			master_conntrack->layer7.app_data[length+oldlength] =
++				isascii(app_data[i])? 
++					tolower(app_data[i]) : app_data[i];
++			length++;
++		}
++	}
++
++	master_conntrack->layer7.app_data[length+oldlength] = '\0';
++	master_conntrack->layer7.app_data_len = length + oldlength;
++
++	return length;
++}
++
++/* taken from drivers/video/modedb.c */
++static int my_atoi(const char *s)
++{
++	int val = 0;
++
++	for (;; s++) {
++		switch (*s) {
++			case '0'...'9':
++			val = 10*val+(*s-'0');
++			break;
++		default:
++			return val;
++		}
++	}
++}
++
++/* write out num_packets to userland. */
++static int layer7_read_proc(char* page, char ** start, off_t off, int count,
++                            int* eof, void * data)
++{
++	if(num_packets > 99 && net_ratelimit())
++		printk(KERN_ERR "layer7: NOT REACHED. num_packets too big\n");
++
++	page[0] = num_packets/10 + '0';
++	page[1] = num_packets%10 + '0';
++	page[2] = '\n';
++	page[3] = '\0';
++
++	*eof=1;
++
++	return 3;
++}
++
++/* Read in num_packets from userland */
++static int layer7_write_proc(struct file* file, const char* buffer,
++                             unsigned long count, void *data)
++{
++	char * foo = kmalloc(count, GFP_ATOMIC);
++
++	if(!foo){
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory, bailing. "
++					"num_packets unchanged.\n");
++		return count;
++	}
++
++	if(copy_from_user(foo, buffer, count)) {
++		return -EFAULT;
++	}
++
++
++	num_packets = my_atoi(foo);
++	kfree (foo);
++
++	/* This has an arbitrary limit to make the math easier. I'm lazy.
++	But anyway, 99 is a LOT! If you want more, you're doing it wrong! */
++	if(num_packets > 99) {
++		printk(KERN_WARNING "layer7: num_packets can't be > 99.\n");
++		num_packets = 99;
++	} else if(num_packets < 1) {
++		printk(KERN_WARNING "layer7: num_packets can't be < 1.\n");
++		num_packets = 1;
++	}
++
++	return count;
++}
++
++static bool
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++match(const struct sk_buff *skbin, const struct xt_match_param *par)
++#else
++match(const struct sk_buff *skbin,
++      const struct net_device *in,
++      const struct net_device *out,
++      const struct xt_match *match,
++      const void *matchinfo,
++      int offset,
++      unsigned int protoff,
++      bool *hotdrop)
++#endif
++{
++	/* sidestep const without getting a compiler warning... */
++	struct sk_buff * skb = (struct sk_buff *)skbin; 
++
++	const struct xt_layer7_info * info = 
++	#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++		par->matchinfo;
++	#else
++		matchinfo;
++	#endif
++
++	enum ip_conntrack_info master_ctinfo, ctinfo;
++	struct nf_conn *master_conntrack, *conntrack;
++	unsigned char * app_data;
++	unsigned int pattern_result, appdatalen;
++	regexp * comppattern;
++
++	/* Be paranoid/incompetent - lock the entire match function. */
++	spin_lock_bh(&l7_lock);
++
++	if(!can_handle(skb)){
++		DPRINTK("layer7: This is some protocol I can't handle.\n");
++		spin_unlock_bh(&l7_lock);
++		return info->invert;
++	}
++
++	/* Treat parent & all its children together as one connection, except
++	for the purpose of setting conntrack->layer7.app_proto in the actual
++	connection. This makes /proc/net/ip_conntrack more satisfying. */
++	if(!(conntrack = nf_ct_get(skb, &ctinfo)) ||
++	   !(master_conntrack=nf_ct_get(skb,&master_ctinfo))){
++		DPRINTK("layer7: couldn't get conntrack.\n");
++		spin_unlock_bh(&l7_lock);
++		return info->invert;
++	}
++
++	/* Try to get a master conntrack (and its master etc) for FTP, etc. */
++	while (master_ct(master_conntrack) != NULL)
++		master_conntrack = master_ct(master_conntrack);
++
++	/* if we've classified it or seen too many packets */
++	if(total_acct_packets(master_conntrack) > num_packets ||
++	   master_conntrack->layer7.app_proto) {
++
++		pattern_result = match_no_append(conntrack, master_conntrack, 
++						 ctinfo, master_ctinfo, info);
++
++		/* skb->cb[0] == seen. Don't do things twice if there are 
++		multiple l7 rules. I'm not sure that using cb for this purpose 
++		is correct, even though it says "put your private variables 
++		there". But it doesn't look like it is being used for anything
++		else in the skbs that make it here. */
++		skb->cb[0] = 1; /* marking it seen here's probably irrelevant */
++
++		spin_unlock_bh(&l7_lock);
++		return (pattern_result ^ info->invert);
++	}
++
++	if(skb_is_nonlinear(skb)){
++		if(skb_linearize(skb) != 0){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: failed to linearize "
++						"packet, bailing.\n");
++			spin_unlock_bh(&l7_lock);
++			return info->invert;
++		}
++	}
++
++	/* now that the skb is linearized, it's safe to set these. */
++	app_data = skb->data + app_data_offset(skb);
++	appdatalen = skb_tail_pointer(skb) - app_data;
++
++	/* the return value gets checked later, when we're ready to use it */
++	comppattern = compile_and_cache(info->pattern, info->protocol);
++
++	/* On the first packet of a connection, allocate space for app data */
++	if(total_acct_packets(master_conntrack) == 1 && !skb->cb[0] && 
++	   !master_conntrack->layer7.app_data){
++		master_conntrack->layer7.app_data = 
++			kmalloc(maxdatalen, GFP_ATOMIC);
++		if(!master_conntrack->layer7.app_data){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: out of memory in "
++						"match, bailing.\n");
++			spin_unlock_bh(&l7_lock);
++			return info->invert;
++		}
++
++		master_conntrack->layer7.app_data[0] = '\0';
++	}
++
++	/* Can be here, but unallocated, if numpackets is increased near
++	the beginning of a connection */
++	if(master_conntrack->layer7.app_data == NULL){
++		spin_unlock_bh(&l7_lock);
++		return info->invert; /* unmatched */
++	}
++
++	if(!skb->cb[0]){
++		int newbytes;
++		newbytes = add_data(master_conntrack, app_data, appdatalen);
++
++		if(newbytes == 0) { /* didn't add any data */
++			skb->cb[0] = 1;
++			/* Didn't match before, not going to match now */
++			spin_unlock_bh(&l7_lock);
++			return info->invert;
++		}
++	}
++
++	/* If looking for "unknown", then never match.  "Unknown" means that
++	we've given up; we're still trying with these packets. */
++	if(!strcmp(info->protocol, "unknown")) {
++		pattern_result = 0;
++	/* If looking for "unset", then always match. "Unset" means that we
++	haven't yet classified the connection. */
++	} else if(!strcmp(info->protocol, "unset")) {
++		pattern_result = 2;
++		DPRINTK("layer7: matched unset: not yet classified "
++			"(%d/%d packets)\n",
++                        total_acct_packets(master_conntrack), num_packets);
++	/* If the regexp failed to compile, don't bother running it */
++	} else if(comppattern && 
++		  regexec(comppattern, master_conntrack->layer7.app_data)){
++		DPRINTK("layer7: matched %s\n", info->protocol);
++		pattern_result = 1;
++	} else pattern_result = 0;
++
++	if(pattern_result == 1) {
++		master_conntrack->layer7.app_proto = 
++			kmalloc(strlen(info->protocol)+1, GFP_ATOMIC);
++		if(!master_conntrack->layer7.app_proto){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: out of memory in "
++						"match, bailing.\n");
++			spin_unlock_bh(&l7_lock);
++			return (pattern_result ^ info->invert);
++		}
++		strcpy(master_conntrack->layer7.app_proto, info->protocol);
++	} else if(pattern_result > 1) { /* cleanup from "unset" */
++		pattern_result = 1;
++	}
++
++	/* mark the packet seen */
++	skb->cb[0] = 1;
++
++	spin_unlock_bh(&l7_lock);
++	return (pattern_result ^ info->invert);
++}
++
++// load nf_conntrack_ipv4
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++static bool check(const struct xt_mtchk_param *par)
++{
++        if (nf_ct_l3proto_try_module_get(par->match->family) < 0) {
++                printk(KERN_WARNING "can't load conntrack support for "
++                                    "proto=%d\n", par->match->family);
++#else
++static bool check(const char *tablename, const void *inf,
++		 const struct xt_match *match, void *matchinfo,
++		 unsigned int hook_mask)
++{
++        if (nf_ct_l3proto_try_module_get(match->family) < 0) {
++                printk(KERN_WARNING "can't load conntrack support for "
++                                    "proto=%d\n", match->family);
++#endif
++                return 0;
++        }
++	return 1;
++}
++
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++	static void destroy(const struct xt_mtdtor_param *par)
++	{
++		nf_ct_l3proto_module_put(par->match->family);
++	}
++#else
++	static void destroy(const struct xt_match *match, void *matchinfo)
++	{
++		nf_ct_l3proto_module_put(match->family);
++	}
++#endif
++
++static struct xt_match xt_layer7_match[] __read_mostly = {
++{
++	.name		= "layer7",
++	.family		= AF_INET,
++	.checkentry	= check,
++	.match		= match,
++	.destroy	= destroy,
++	.matchsize	= sizeof(struct xt_layer7_info),
++	.me		= THIS_MODULE
++}
++};
++
++static void layer7_cleanup_proc(void)
++{
++	remove_proc_entry("layer7_numpackets", init_net.proc_net);
++}
++
++/* register the proc file */
++static void layer7_init_proc(void)
++{
++	struct proc_dir_entry* entry;
++	entry = create_proc_entry("layer7_numpackets", 0644, init_net.proc_net);
++	entry->read_proc = layer7_read_proc;
++	entry->write_proc = layer7_write_proc;
++}
++
++static int __init xt_layer7_init(void)
++{
++	need_conntrack();
++
++	layer7_init_proc();
++	if(maxdatalen < 1) {
++		printk(KERN_WARNING "layer7: maxdatalen can't be < 1, "
++			"using 1\n");
++		maxdatalen = 1;
++	}
++	/* This is not a hard limit.  It's just here to prevent people from
++	bringing their slow machines to a grinding halt. */
++	else if(maxdatalen > 65536) {
++		printk(KERN_WARNING "layer7: maxdatalen can't be > 65536, "
++			"using 65536\n");
++		maxdatalen = 65536;
++	}
++	return xt_register_matches(xt_layer7_match,
++				   ARRAY_SIZE(xt_layer7_match));
++}
++
++static void __exit xt_layer7_fini(void)
++{
++	layer7_cleanup_proc();
++	xt_unregister_matches(xt_layer7_match, ARRAY_SIZE(xt_layer7_match));
++}
++
++module_init(xt_layer7_init);
++module_exit(xt_layer7_fini);
diff --git a/target/linux/generic/patches-2.6.30/101-netfilter_layer7_pktmatch.patch b/target/linux/generic/patches-2.6.30/101-netfilter_layer7_pktmatch.patch
new file mode 100644
index 0000000000..f65e301fd1
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/101-netfilter_layer7_pktmatch.patch
@@ -0,0 +1,108 @@
+--- a/include/linux/netfilter/xt_layer7.h
++++ b/include/linux/netfilter/xt_layer7.h
+@@ -8,6 +8,7 @@ struct xt_layer7_info {
+     char protocol[MAX_PROTOCOL_LEN];
+     char pattern[MAX_PATTERN_LEN];
+     u_int8_t invert;
++    u_int8_t pkt;
+ };
+ 
+ #endif /* _XT_LAYER7_H */
+--- a/net/netfilter/xt_layer7.c
++++ b/net/netfilter/xt_layer7.c
+@@ -314,33 +314,35 @@ static int match_no_append(struct nf_con
+ }
+ 
+ /* add the new app data to the conntrack.  Return number of bytes added. */
+-static int add_data(struct nf_conn * master_conntrack,
+-                    char * app_data, int appdatalen)
++static int add_datastr(char *target, int offset, char *app_data, int len)
+ {
+ 	int length = 0, i;
+-	int oldlength = master_conntrack->layer7.app_data_len;
+-
+-	/* This is a fix for a race condition by Deti Fliegl. However, I'm not 
+-	   clear on whether the race condition exists or whether this really 
+-	   fixes it.  I might just be being dense... Anyway, if it's not really 
+-	   a fix, all it does is waste a very small amount of time. */
+-	if(!master_conntrack->layer7.app_data) return 0;
++	if (!target) return 0;
+ 
+ 	/* Strip nulls. Make everything lower case (our regex lib doesn't
+ 	do case insensitivity).  Add it to the end of the current data. */
+-	for(i = 0; i < maxdatalen-oldlength-1 &&
+-		   i < appdatalen; i++) {
++ 	for(i = 0; i < maxdatalen-offset-1 && i < len; i++) {
+ 		if(app_data[i] != '\0') {
+ 			/* the kernel version of tolower mungs 'upper ascii' */
+-			master_conntrack->layer7.app_data[length+oldlength] =
++			target[length+offset] =
+ 				isascii(app_data[i])? 
+ 					tolower(app_data[i]) : app_data[i];
+ 			length++;
+ 		}
+ 	}
++	target[length+offset] = '\0';
++
++	return length;
++}
++
++/* add the new app data to the conntrack.  Return number of bytes added. */
++static int add_data(struct nf_conn * master_conntrack,
++                    char * app_data, int appdatalen)
++{
++	int length;
+ 
+-	master_conntrack->layer7.app_data[length+oldlength] = '\0';
+-	master_conntrack->layer7.app_data_len = length + oldlength;
++	length = add_datastr(master_conntrack->layer7.app_data, master_conntrack->layer7.app_data_len, app_data, appdatalen);
++	master_conntrack->layer7.app_data_len += length;
+ 
+ 	return length;
+ }
+@@ -438,7 +440,7 @@ match(const struct sk_buff *skbin,
+ 
+ 	enum ip_conntrack_info master_ctinfo, ctinfo;
+ 	struct nf_conn *master_conntrack, *conntrack;
+-	unsigned char * app_data;
++	unsigned char *app_data, *tmp_data;
+ 	unsigned int pattern_result, appdatalen;
+ 	regexp * comppattern;
+ 
+@@ -466,8 +468,8 @@ match(const struct sk_buff *skbin,
+ 		master_conntrack = master_ct(master_conntrack);
+ 
+ 	/* if we've classified it or seen too many packets */
+-	if(total_acct_packets(master_conntrack) > num_packets ||
+-	   master_conntrack->layer7.app_proto) {
++	if(!info->pkt && (total_acct_packets(master_conntrack) > num_packets ||
++	   master_conntrack->layer7.app_proto)) {
+ 
+ 		pattern_result = match_no_append(conntrack, master_conntrack, 
+ 						 ctinfo, master_ctinfo, info);
+@@ -500,6 +502,25 @@ match(const struct sk_buff *skbin,
+ 	/* the return value gets checked later, when we're ready to use it */
+ 	comppattern = compile_and_cache(info->pattern, info->protocol);
+ 
++	if (info->pkt) {
++		tmp_data = kmalloc(maxdatalen, GFP_ATOMIC);
++		if(!tmp_data){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: out of memory in match, bailing.\n");
++			return info->invert;
++		}
++
++		tmp_data[0] = '\0';
++		add_datastr(tmp_data, 0, app_data, appdatalen);
++		pattern_result = ((comppattern && regexec(comppattern, tmp_data)) ? 1 : 0);
++
++		kfree(tmp_data);
++		tmp_data = NULL;
++		spin_unlock_bh(&l7_lock);
++
++		return (pattern_result ^ info->invert);
++	}
++
+ 	/* On the first packet of a connection, allocate space for app data */
+ 	if(total_acct_packets(master_conntrack) == 1 && !skb->cb[0] && 
+ 	   !master_conntrack->layer7.app_data){
diff --git a/target/linux/generic/patches-2.6.30/110-netfilter_match_speedup.patch b/target/linux/generic/patches-2.6.30/110-netfilter_match_speedup.patch
new file mode 100644
index 0000000000..926966ced0
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/110-netfilter_match_speedup.patch
@@ -0,0 +1,144 @@
+--- a/include/linux/netfilter_ipv4/ip_tables.h
++++ b/include/linux/netfilter_ipv4/ip_tables.h
+@@ -62,6 +62,7 @@ struct ipt_ip {
+ #define IPT_F_FRAG		0x01	/* Set if rule is a fragment rule */
+ #define IPT_F_GOTO		0x02	/* Set if jump is a goto */
+ #define IPT_F_MASK		0x03	/* All possible flag bits mask. */
++#define IPT_F_NO_DEF_MATCH	0x80	/* Internal: no default match rules present */
+ 
+ /* Values for "inv" field in struct ipt_ip. */
+ #define IPT_INV_VIA_IN		0x01	/* Invert the sense of IN IFACE. */
+--- a/net/ipv4/netfilter/ip_tables.c
++++ b/net/ipv4/netfilter/ip_tables.c
+@@ -87,6 +87,9 @@ ip_packet_match(const struct iphdr *ip,
+ 
+ #define FWINV(bool, invflg) ((bool) ^ !!(ipinfo->invflags & (invflg)))
+ 
++	if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
++		return true;
++
+ 	if (FWINV((ip->saddr&ipinfo->smsk.s_addr) != ipinfo->src.s_addr,
+ 		  IPT_INV_SRCIP)
+ 	    || FWINV((ip->daddr&ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr,
+@@ -137,13 +140,35 @@ ip_packet_match(const struct iphdr *ip,
+ 		return false;
+ 	}
+ 
++#undef FWINV
+ 	return true;
+ }
+ 
+ static bool
+-ip_checkentry(const struct ipt_ip *ip)
++ip_checkentry(struct ipt_ip *ip)
+ {
+-	if (ip->flags & ~IPT_F_MASK) {
++#define FWINV(bool, invflg) ((bool) || (ip->invflags & (invflg)))
++
++	if (FWINV(ip->smsk.s_addr, IPT_INV_SRCIP) ||
++		FWINV(ip->dmsk.s_addr, IPT_INV_DSTIP))
++		goto has_match_rules;
++
++	if (FWINV(!!((const unsigned long *)ip->iniface_mask)[0],
++		IPT_INV_VIA_IN) ||
++	    FWINV(!!((const unsigned long *)ip->outiface_mask)[0],
++		IPT_INV_VIA_OUT))
++		goto has_match_rules;
++
++	if (FWINV(ip->proto, IPT_INV_PROTO))
++		goto has_match_rules;
++
++	if (FWINV(ip->flags&IPT_F_FRAG, IPT_INV_FRAG))
++		goto has_match_rules;
++
++	ip->flags |= IPT_F_NO_DEF_MATCH;
++
++has_match_rules:
++	if (ip->flags & ~(IPT_F_MASK|IPT_F_NO_DEF_MATCH)) {
+ 		duprintf("Unknown flag bits set: %08X\n",
+ 			 ip->flags & ~IPT_F_MASK);
+ 		return false;
+@@ -153,6 +178,8 @@ ip_checkentry(const struct ipt_ip *ip)
+ 			 ip->invflags & ~IPT_INV_MASK);
+ 		return false;
+ 	}
++
++#undef FWINV
+ 	return true;
+ }
+ 
+@@ -200,7 +227,6 @@ unconditional(const struct ipt_ip *ip)
+ 			return 0;
+ 
+ 	return 1;
+-#undef FWINV
+ }
+ 
+ #if defined(CONFIG_NETFILTER_XT_TARGET_TRACE) || \
+@@ -318,8 +344,28 @@ ipt_do_table(struct sk_buff *skb,
+ 	struct xt_match_param mtpar;
+ 	struct xt_target_param tgpar;
+ 
+-	/* Initialization */
+ 	ip = ip_hdr(skb);
++
++	IP_NF_ASSERT(table->valid_hooks & (1 << hook));
++	xt_info_rdlock_bh();
++	private = table->private;
++	table_base = private->entries[smp_processor_id()];
++	e = get_entry(table_base, private->hook_entry[hook]);
++
++	if (e->target_offset <= sizeof(struct ipt_entry) &&
++		(e->ip.flags & IPT_F_NO_DEF_MATCH)) {
++			struct ipt_entry_target *t = ipt_get_target(e);
++			if (!t->u.kernel.target->target) {
++				int v = ((struct ipt_standard_target *)t)->verdict;
++				if ((v < 0) && (v != IPT_RETURN)) {
++					ADD_COUNTER(e->counters, ntohs(ip->tot_len), 1);
++					xt_info_rdunlock_bh();
++					return (unsigned)(-v) - 1;
++				}
++			}
++	}
++
++	/* Initialization */
+ 	datalen = skb->len - ip->ihl * 4;
+ 	indev = in ? in->name : nulldevname;
+ 	outdev = out ? out->name : nulldevname;
+@@ -337,13 +383,6 @@ ipt_do_table(struct sk_buff *skb,
+ 	mtpar.family  = tgpar.family = NFPROTO_IPV4;
+ 	tgpar.hooknum = hook;
+ 
+-	IP_NF_ASSERT(table->valid_hooks & (1 << hook));
+-	xt_info_rdlock_bh();
+-	private = table->private;
+-	table_base = private->entries[smp_processor_id()];
+-
+-	e = get_entry(table_base, private->hook_entry[hook]);
+-
+ 	/* For return from builtin chain */
+ 	back = get_entry(table_base, private->underflow[hook]);
+ 
+@@ -976,6 +1015,7 @@ copy_entries_to_user(unsigned int total_
+ 		unsigned int i;
+ 		const struct ipt_entry_match *m;
+ 		const struct ipt_entry_target *t;
++		u8 flags;
+ 
+ 		e = (struct ipt_entry *)(loc_cpu_entry + off);
+ 		if (copy_to_user(userptr + off
+@@ -986,6 +1026,14 @@ copy_entries_to_user(unsigned int total_
+ 			goto free_counters;
+ 		}
+ 
++		flags = e->ip.flags & ~IPT_F_NO_DEF_MATCH;
++		if (copy_to_user(userptr + off
++				 + offsetof(struct ipt_entry, ip.flags),
++				 &flags, sizeof(flags)) != 0) {
++			ret = -EFAULT;
++			goto free_counters;
++		}
++
+ 		for (i = sizeof(struct ipt_entry);
+ 		     i < e->target_offset;
+ 		     i += m->u.match_size) {
diff --git a/target/linux/generic/patches-2.6.30/150-netfilter_imq.patch b/target/linux/generic/patches-2.6.30/150-netfilter_imq.patch
new file mode 100644
index 0000000000..3bd7a8fbb6
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/150-netfilter_imq.patch
@@ -0,0 +1,1260 @@
+--- /dev/null
++++ b/drivers/net/imq.c
+@@ -0,0 +1,571 @@
++/*
++ *             Pseudo-driver for the intermediate queue device.
++ *
++ *             This program is free software; you can redistribute it and/or
++ *             modify it under the terms of the GNU General Public License
++ *             as published by the Free Software Foundation; either version
++ *             2 of the License, or (at your option) any later version.
++ *
++ * Authors:    Patrick McHardy, <kaber@trash.net>
++ *
++ *            The first version was written by Martin Devera, <devik@cdi.cz>
++ *
++ * Credits:    Jan Rafaj <imq2t@cedric.vabo.cz>
++ *              - Update patch to 2.4.21
++ *             Sebastian Strollo <sstrollo@nortelnetworks.com>
++ *              - Fix "Dead-loop on netdevice imq"-issue
++ *             Marcel Sebek <sebek64@post.cz>
++ *              - Update to 2.6.2-rc1
++ *
++ *	       After some time of inactivity there is a group taking care
++ *	       of IMQ again: http://www.linuximq.net
++ *
++ *
++ *	       2004/06/30 - New version of IMQ patch to kernels <=2.6.7
++ *             including the following changes:
++ *
++ *	       - Correction of ipv6 support "+"s issue (Hasso Tepper)
++ *	       - Correction of imq_init_devs() issue that resulted in
++ *	       kernel OOPS unloading IMQ as module (Norbert Buchmuller)
++ *	       - Addition of functionality to choose number of IMQ devices
++ *	       during kernel config (Andre Correa)
++ *	       - Addition of functionality to choose how IMQ hooks on
++ *	       PRE and POSTROUTING (after or before NAT) (Andre Correa)
++ *	       - Cosmetic corrections (Norbert Buchmuller) (Andre Correa)
++ *
++ *
++ *             2005/12/16 - IMQ versions between 2.6.7 and 2.6.13 were
++ *             released with almost no problems. 2.6.14-x was released
++ *             with some important changes: nfcache was removed; After
++ *             some weeks of trouble we figured out that some IMQ fields
++ *             in skb were missing in skbuff.c - skb_clone and copy_skb_header.
++ *             These functions are correctly patched by this new patch version.
++ *
++ *             Thanks for all who helped to figure out all the problems with
++ *             2.6.14.x: Patrick McHardy, Rune Kock, VeNoMouS, Max CtRiX,
++ *             Kevin Shanahan, Richard Lucassen, Valery Dachev (hopefully
++ *             I didn't forget anybody). I apologize again for my lack of time.
++ *
++ *
++ *             2008/06/17 - 2.6.25 - Changed imq.c to use qdisc_run() instead
++ *             of qdisc_restart() and moved qdisc_run() to tasklet to avoid
++ *             recursive locking. New initialization routines to fix 'rmmod' not
++ *             working anymore. Used code from ifb.c. (Jussi Kivilinna)
++ *
++ *             2008/08/06 - 2.6.26 - (JK)
++ *              - Replaced tasklet with 'netif_schedule()'.
++ *              - Cleaned up and added comments for imq_nf_queue().
++ *
++ *             2009/04/12
++ *              - Add skb_save_cb/skb_restore_cb helper functions for backuping
++ *                control buffer. This is needed because qdisc-layer on kernels
++ *                2.6.27 and newer overwrite control buffer. (Jussi Kivilinna)
++ *              - Add better locking for IMQ device. Hopefully this will solve
++ *                SMP issues. (Jussi Kivilinna)
++ *              - Port to 2.6.27
++ *              - Port to 2.6.28
++ *              - Port to 2.6.29 + fix rmmod not working
++ *
++ *             2009/04/20 - (Jussi Kivilinna)
++ *              - Use netdevice feature flags to avoid extra packet handling
++ *                by core networking layer and possibly increase performance.
++ *
++ *	       Also, many thanks to pablo Sebastian Greco for making the initial
++ *	       patch and to those who helped the testing.
++ *
++ *             More info at: http://www.linuximq.net/ (Andre Correa)
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/moduleparam.h>
++#include <linux/list.h>
++#include <linux/skbuff.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/rtnetlink.h>
++#include <linux/if_arp.h>
++#include <linux/netfilter.h>
++#include <linux/netfilter_ipv4.h>
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++	#include <linux/netfilter_ipv6.h>
++#endif
++#include <linux/imq.h>
++#include <net/pkt_sched.h>
++#include <net/netfilter/nf_queue.h>
++
++static nf_hookfn imq_nf_hook;
++
++static struct nf_hook_ops imq_ingress_ipv4 = {
++	.hook		= imq_nf_hook,
++	.owner		= THIS_MODULE,
++	.pf		= PF_INET,
++	.hooknum	= NF_INET_PRE_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++	.priority	= NF_IP_PRI_MANGLE + 1
++#else
++	.priority	= NF_IP_PRI_NAT_DST + 1
++#endif
++};
++
++static struct nf_hook_ops imq_egress_ipv4 = {
++	.hook		= imq_nf_hook,
++	.owner		= THIS_MODULE,
++	.pf		= PF_INET,
++	.hooknum	= NF_INET_POST_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_AA) || defined(CONFIG_IMQ_BEHAVIOR_BA)
++	.priority	= NF_IP_PRI_LAST
++#else
++	.priority	= NF_IP_PRI_NAT_SRC - 1
++#endif
++};
++
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++static struct nf_hook_ops imq_ingress_ipv6 = {
++	.hook		= imq_nf_hook,
++	.owner		= THIS_MODULE,
++	.pf		= PF_INET6,
++	.hooknum	= NF_INET_PRE_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++	.priority	= NF_IP6_PRI_MANGLE + 1
++#else
++	.priority	= NF_IP6_PRI_NAT_DST + 1
++#endif
++};
++
++static struct nf_hook_ops imq_egress_ipv6 = {
++	.hook		= imq_nf_hook,
++	.owner		= THIS_MODULE,
++	.pf		= PF_INET6,
++	.hooknum	= NF_INET_POST_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_AA) || defined(CONFIG_IMQ_BEHAVIOR_BA)
++	.priority	= NF_IP6_PRI_LAST
++#else
++	.priority	= NF_IP6_PRI_NAT_SRC - 1
++#endif
++};
++#endif
++
++#if defined(CONFIG_IMQ_NUM_DEVS)
++static unsigned int numdevs = CONFIG_IMQ_NUM_DEVS;
++#else
++static unsigned int numdevs = IMQ_MAX_DEVS;
++#endif
++
++static DEFINE_SPINLOCK(imq_nf_queue_lock);
++
++static struct net_device *imq_devs_cache[IMQ_MAX_DEVS];
++
++
++static struct net_device_stats *imq_get_stats(struct net_device *dev)
++{
++	return &dev->stats;
++}
++
++/* called for packets kfree'd in qdiscs at places other than enqueue */
++static void imq_skb_destructor(struct sk_buff *skb)
++{
++	struct nf_queue_entry *entry = skb->nf_queue_entry;
++
++	if (entry) {
++		nf_queue_entry_release_refs(entry);
++		kfree(entry);
++	}
++
++	skb_restore_cb(skb); /* kfree backup */
++}
++
++static void imq_nf_reinject(struct nf_queue_entry *entry, unsigned int verdict)
++{
++	int status;
++
++	if (!entry->next_outfn) {
++		spin_lock_bh(&imq_nf_queue_lock);
++		nf_reinject(entry, verdict);
++		spin_unlock_bh(&imq_nf_queue_lock);
++		return;
++	}
++
++	rcu_read_lock();
++	local_bh_disable();
++	status = entry->next_outfn(entry, entry->next_queuenum);
++	local_bh_enable();
++	if (status < 0) {
++		nf_queue_entry_release_refs(entry);
++		kfree_skb(entry->skb);
++		kfree(entry);
++	}
++
++	rcu_read_unlock();
++}
++
++static int imq_dev_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++	dev->stats.tx_bytes += skb->len;
++	dev->stats.tx_packets++;
++
++	skb->imq_flags = 0;
++	skb->destructor = NULL;
++
++	skb_restore_cb(skb); /* restore skb->cb */
++
++	dev->trans_start = jiffies;
++	imq_nf_reinject(skb->nf_queue_entry, NF_ACCEPT);
++	return 0;
++}
++
++static int imq_nf_queue(struct nf_queue_entry *entry, unsigned queue_num)
++{
++	struct net_device *dev;
++	struct sk_buff *skb_orig, *skb, *skb_shared;
++	struct Qdisc *q;
++	struct netdev_queue *txq;
++	int users, index;
++	int retval = -EINVAL;
++
++	index = entry->skb->imq_flags & IMQ_F_IFMASK;
++	if (unlikely(index > numdevs - 1)) {
++		if (net_ratelimit())
++			printk(KERN_WARNING
++			       "IMQ: invalid device specified, highest is %u\n",
++			       numdevs - 1);
++		retval = -EINVAL;
++		goto out;
++	}
++
++	/* check for imq device by index from cache */
++	dev = imq_devs_cache[index];
++	if (unlikely(!dev)) {
++		char buf[8];
++
++		/* get device by name and cache result */
++		snprintf(buf, sizeof(buf), "imq%d", index);
++		dev = dev_get_by_name(&init_net, buf);
++		if (!dev) {
++			/* not found ?!*/
++			BUG();
++			retval = -ENODEV;
++			goto out;
++		}
++
++		imq_devs_cache[index] = dev;
++		dev_put(dev);
++	}
++
++	if (unlikely(!(dev->flags & IFF_UP))) {
++		entry->skb->imq_flags = 0;
++		imq_nf_reinject(entry, NF_ACCEPT);
++		retval = 0;
++		goto out;
++	}
++	dev->last_rx = jiffies;
++
++	skb = entry->skb;
++	skb_orig = NULL;
++
++	/* skb has owner? => make clone */
++	if (unlikely(skb->destructor)) {
++		skb_orig = skb;
++		skb = skb_clone(skb, GFP_ATOMIC);
++		if (!skb) {
++			retval = -ENOMEM;
++			goto out;
++		}
++		entry->skb = skb;
++	}
++
++	skb->nf_queue_entry = entry;
++
++	dev->stats.rx_bytes += skb->len;
++	dev->stats.rx_packets++;
++
++	txq = dev_pick_tx(dev, skb);
++
++	q = rcu_dereference(txq->qdisc);
++	if (unlikely(!q->enqueue))
++		goto packet_not_eaten_by_imq_dev;
++
++	spin_lock_bh(qdisc_lock(q));
++
++	users = atomic_read(&skb->users);
++
++	skb_shared = skb_get(skb); /* increase reference count by one */
++	skb_save_cb(skb_shared); /* backup skb->cb, as qdisc layer will
++					overwrite it */
++	qdisc_enqueue_root(skb_shared, q); /* might kfree_skb */
++
++	if (likely(atomic_read(&skb_shared->users) == users + 1)) {
++		kfree_skb(skb_shared); /* decrease reference count by one */
++
++		skb->destructor = &imq_skb_destructor;
++
++		/* cloned? */
++		if (skb_orig)
++			kfree_skb(skb_orig); /* free original */
++
++		spin_unlock_bh(qdisc_lock(q));
++
++		/* schedule qdisc dequeue */
++		__netif_schedule(q);
++
++		retval = 0;
++		goto out;
++	} else {
++		skb_restore_cb(skb_shared); /* restore skb->cb */
++		/* qdisc dropped packet and decreased skb reference count of
++		 * skb, so we don't really want to and try refree as that would
++		 * actually destroy the skb. */
++		spin_unlock_bh(qdisc_lock(q));
++		goto packet_not_eaten_by_imq_dev;
++	}
++
++packet_not_eaten_by_imq_dev:
++	/* cloned? restore original */
++	if (skb_orig) {
++		kfree_skb(skb);
++		entry->skb = skb_orig;
++	}
++	retval = -1;
++out:
++	return retval;
++}
++
++static struct nf_queue_handler nfqh = {
++	.name  = "imq",
++	.outfn = imq_nf_queue,
++};
++
++static unsigned int imq_nf_hook(unsigned int hook, struct sk_buff *pskb,
++				const struct net_device *indev,
++				const struct net_device *outdev,
++				int (*okfn)(struct sk_buff *))
++{
++	if (pskb->imq_flags & IMQ_F_ENQUEUE)
++		return NF_QUEUE;
++
++	return NF_ACCEPT;
++}
++
++static int imq_close(struct net_device *dev)
++{
++	netif_stop_queue(dev);
++	return 0;
++}
++
++static int imq_open(struct net_device *dev)
++{
++	netif_start_queue(dev);
++	return 0;
++}
++
++static const struct net_device_ops imq_netdev_ops = {
++	.ndo_open		= imq_open,
++	.ndo_stop		= imq_close,
++	.ndo_start_xmit		= imq_dev_xmit,
++	.ndo_get_stats		= imq_get_stats,
++};
++
++static void imq_setup(struct net_device *dev)
++{
++	dev->netdev_ops		= &imq_netdev_ops;
++	dev->type               = ARPHRD_VOID;
++	dev->mtu                = 16000;
++	dev->tx_queue_len       = 11000;
++	dev->flags              = IFF_NOARP;
++	dev->features           = NETIF_F_SG | NETIF_F_FRAGLIST |
++				  NETIF_F_GSO | NETIF_F_HW_CSUM |
++				  NETIF_F_HIGHDMA;
++}
++
++static int imq_validate(struct nlattr *tb[], struct nlattr *data[])
++{
++	int ret = 0;
++
++	if (tb[IFLA_ADDRESS]) {
++		if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN) {
++			ret = -EINVAL;
++			goto end;
++		}
++		if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS]))) {
++			ret = -EADDRNOTAVAIL;
++			goto end;
++		}
++	}
++	return 0;
++end:
++	printk(KERN_WARNING "IMQ: imq_validate failed (%d)\n", ret);
++	return ret;
++}
++
++static struct rtnl_link_ops imq_link_ops __read_mostly = {
++	.kind		= "imq",
++	.priv_size	= 0,
++	.setup		= imq_setup,
++	.validate	= imq_validate,
++};
++
++static int __init imq_init_hooks(void)
++{
++	int err;
++
++	nf_register_queue_imq_handler(&nfqh);
++
++	err = nf_register_hook(&imq_ingress_ipv4);
++	if (err)
++		goto err1;
++
++	err = nf_register_hook(&imq_egress_ipv4);
++	if (err)
++		goto err2;
++
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++	err = nf_register_hook(&imq_ingress_ipv6);
++	if (err)
++		goto err3;
++
++	err = nf_register_hook(&imq_egress_ipv6);
++	if (err)
++		goto err4;
++#endif
++
++	return 0;
++
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++err4:
++	nf_unregister_hook(&imq_ingress_ipv6);
++err3:
++	nf_unregister_hook(&imq_egress_ipv4);
++#endif
++err2:
++	nf_unregister_hook(&imq_ingress_ipv4);
++err1:
++	nf_unregister_queue_imq_handler();
++	return err;
++}
++
++static int __init imq_init_one(int index)
++{
++	struct net_device *dev;
++	int ret;
++
++	dev = alloc_netdev(0, "imq%d", imq_setup);
++	if (!dev)
++		return -ENOMEM;
++
++	ret = dev_alloc_name(dev, dev->name);
++	if (ret < 0)
++		goto fail;
++
++	dev->rtnl_link_ops = &imq_link_ops;
++	ret = register_netdevice(dev);
++	if (ret < 0)
++		goto fail;
++
++	return 0;
++fail:
++	free_netdev(dev);
++	return ret;
++}
++
++static int __init imq_init_devs(void)
++{
++	int err, i;
++
++	if (numdevs < 1 || numdevs > IMQ_MAX_DEVS) {
++		printk(KERN_ERR "IMQ: numdevs has to be betweed 1 and %u\n",
++		       IMQ_MAX_DEVS);
++		return -EINVAL;
++	}
++
++	rtnl_lock();
++	err = __rtnl_link_register(&imq_link_ops);
++
++	for (i = 0; i < numdevs && !err; i++)
++		err = imq_init_one(i);
++
++	if (err) {
++		__rtnl_link_unregister(&imq_link_ops);
++		memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
++	}
++	rtnl_unlock();
++
++	return err;
++}
++
++static int __init imq_init_module(void)
++{
++	int err;
++
++#if defined(CONFIG_IMQ_NUM_DEVS)
++	BUILD_BUG_ON(CONFIG_IMQ_NUM_DEVS > 16);
++	BUILD_BUG_ON(CONFIG_IMQ_NUM_DEVS < 2);
++	BUILD_BUG_ON(CONFIG_IMQ_NUM_DEVS - 1 > IMQ_F_IFMASK);
++#endif
++
++	err = imq_init_devs();
++	if (err) {
++		printk(KERN_ERR "IMQ: Error trying imq_init_devs(net)\n");
++		return err;
++	}
++
++	err = imq_init_hooks();
++	if (err) {
++		printk(KERN_ERR "IMQ: Error trying imq_init_hooks()\n");
++		rtnl_link_unregister(&imq_link_ops);
++		memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
++		return err;
++	}
++
++	printk(KERN_INFO "IMQ driver loaded successfully.\n");
++
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++	printk(KERN_INFO "\tHooking IMQ before NAT on PREROUTING.\n");
++#else
++	printk(KERN_INFO "\tHooking IMQ after NAT on PREROUTING.\n");
++#endif
++#if defined(CONFIG_IMQ_BEHAVIOR_AB) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++	printk(KERN_INFO "\tHooking IMQ before NAT on POSTROUTING.\n");
++#else
++	printk(KERN_INFO "\tHooking IMQ after NAT on POSTROUTING.\n");
++#endif
++
++	return 0;
++}
++
++static void __exit imq_unhook(void)
++{
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++	nf_unregister_hook(&imq_ingress_ipv6);
++	nf_unregister_hook(&imq_egress_ipv6);
++#endif
++	nf_unregister_hook(&imq_ingress_ipv4);
++	nf_unregister_hook(&imq_egress_ipv4);
++
++	nf_unregister_queue_imq_handler();
++}
++
++static void __exit imq_cleanup_devs(void)
++{
++	rtnl_link_unregister(&imq_link_ops);
++	memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
++}
++
++static void __exit imq_exit_module(void)
++{
++	imq_unhook();
++	imq_cleanup_devs();
++	printk(KERN_INFO "IMQ driver unloaded successfully.\n");
++}
++
++module_init(imq_init_module);
++module_exit(imq_exit_module);
++
++module_param(numdevs, int, 0);
++MODULE_PARM_DESC(numdevs, "number of IMQ devices (how many imq* devices will "
++			"be created)");
++MODULE_AUTHOR("http://www.linuximq.net");
++MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See "
++			"http://www.linuximq.net/ for more information.");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS_RTNL_LINK("imq");
++
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -119,6 +119,129 @@ config EQUALIZER
+ 	  To compile this driver as a module, choose M here: the module
+ 	  will be called eql.  If unsure, say N.
+ 
++config IMQ
++	tristate "IMQ (intermediate queueing device) support"
++	depends on NETDEVICES && NETFILTER
++	---help---
++	  The IMQ device(s) is used as placeholder for QoS queueing
++	  disciplines. Every packet entering/leaving the IP stack can be
++	  directed through the IMQ device where it's enqueued/dequeued to the
++	  attached qdisc. This allows you to treat network devices as classes
++	  and distribute bandwidth among them. Iptables is used to specify
++	  through which IMQ device, if any, packets travel.
++
++	  More information at: http://www.linuximq.net/
++
++	  To compile this driver as a module, choose M here: the module
++	  will be called imq.  If unsure, say N.
++
++choice
++	prompt "IMQ behavior (PRE/POSTROUTING)"
++	depends on IMQ
++	default IMQ_BEHAVIOR_AB
++	help
++
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		IMQ can work in any of the following ways:
++
++		    PREROUTING   |      POSTROUTING
++		-----------------|-------------------
++		#1  After NAT    |      After NAT
++		#2  After NAT    |      Before NAT
++		#3  Before NAT   |      After NAT
++		#4  Before NAT   |      Before NAT
++
++		The default behavior is to hook before NAT on PREROUTING
++		and after NAT on POSTROUTING (#3).
++
++		This settings are specially usefull when trying to use IMQ
++		to shape NATed clients.
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_AA
++	bool "IMQ AA"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   After NAT
++		POSTROUTING:  After NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_AB
++	bool "IMQ AB"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   After NAT
++		POSTROUTING:  Before NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_BA
++	bool "IMQ BA"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   Before NAT
++		POSTROUTING:  After NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_BB
++	bool "IMQ BB"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   Before NAT
++		POSTROUTING:  Before NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++endchoice
++
++config IMQ_NUM_DEVS
++
++	int "Number of IMQ devices"
++	range 2 16
++	depends on IMQ
++	default "16"
++	help
++
++		This settings defines how many IMQ devices will be
++		created.
++
++		The default value is 16.
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
+ config TUN
+ 	tristate "Universal TUN/TAP device driver support"
+ 	select CRC32
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -152,6 +152,7 @@ obj-$(CONFIG_SLHC) += slhc.o
+ obj-$(CONFIG_XEN_NETDEV_FRONTEND) += xen-netfront.o
+ 
+ obj-$(CONFIG_DUMMY) += dummy.o
++obj-$(CONFIG_IMQ) += imq.o
+ obj-$(CONFIG_IFB) += ifb.o
+ obj-$(CONFIG_MACVLAN) += macvlan.o
+ obj-$(CONFIG_DE600) += de600.o
+--- /dev/null
++++ b/include/linux/imq.h
+@@ -0,0 +1,13 @@
++#ifndef _IMQ_H
++#define _IMQ_H
++
++/* IFMASK (16 device indexes, 0 to 15) and flag(s) fit in 5 bits */
++#define IMQ_F_BITS	5
++
++#define IMQ_F_IFMASK	0x0f
++#define IMQ_F_ENQUEUE	0x10
++
++#define IMQ_MAX_DEVS	(IMQ_F_IFMASK + 1)
++
++#endif /* _IMQ_H */
++
+--- /dev/null
++++ b/include/linux/netfilter_ipv4/ipt_IMQ.h
+@@ -0,0 +1,10 @@
++#ifndef _IPT_IMQ_H
++#define _IPT_IMQ_H
++
++/* Backwards compatibility for old userspace */
++#include <linux/netfilter/xt_IMQ.h>
++
++#define ipt_imq_info xt_imq_info
++
++#endif /* _IPT_IMQ_H */
++
+--- /dev/null
++++ b/include/linux/netfilter_ipv6/ip6t_IMQ.h
+@@ -0,0 +1,10 @@
++#ifndef _IP6T_IMQ_H
++#define _IP6T_IMQ_H
++
++/* Backwards compatibility for old userspace */
++#include <linux/netfilter/xt_IMQ.h>
++
++#define ip6t_imq_info xt_imq_info
++
++#endif /* _IP6T_IMQ_H */
++
+--- a/include/linux/skbuff.h
++++ b/include/linux/skbuff.h
+@@ -28,6 +28,9 @@
+ #include <linux/rcupdate.h>
+ #include <linux/dmaengine.h>
+ #include <linux/hrtimer.h>
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++#include <linux/imq.h>
++#endif
+ 
+ /* Don't change this without changing skb_csum_unnecessary! */
+ #define CHECKSUM_NONE 0
+@@ -333,6 +336,9 @@ struct sk_buff {
+ 	 * first. This is owned by whoever has the skb queued ATM.
+ 	 */
+ 	char			cb[48];
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	void			*cb_next;
++#endif
+ 
+ 	unsigned int		len,
+ 				data_len;
+@@ -363,6 +369,9 @@ struct sk_buff {
+ 	struct nf_conntrack	*nfct;
+ 	struct sk_buff		*nfct_reasm;
+ #endif
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	struct nf_queue_entry	*nf_queue_entry;
++#endif
+ #ifdef CONFIG_BRIDGE_NETFILTER
+ 	struct nf_bridge_info	*nf_bridge;
+ #endif
+@@ -383,6 +392,9 @@ struct sk_buff {
+ 	__u8			requeue:1;
+ #endif
+ 	/* 0/13/14 bit hole */
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	__u8			imq_flags:IMQ_F_BITS;
++#endif
+ 
+ #ifdef CONFIG_NET_DMA
+ 	dma_cookie_t		dma_cookie;
+@@ -423,6 +435,12 @@ extern void skb_dma_unmap(struct device 
+ 			  enum dma_data_direction dir);
+ #endif
+ 
++
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++extern int skb_save_cb(struct sk_buff *skb);
++extern int skb_restore_cb(struct sk_buff *skb);
++#endif
++
+ extern void kfree_skb(struct sk_buff *skb);
+ extern void consume_skb(struct sk_buff *skb);
+ extern void	       __kfree_skb(struct sk_buff *skb);
+@@ -1931,6 +1949,10 @@ static inline void __nf_copy(struct sk_b
+ 	dst->nfct_reasm = src->nfct_reasm;
+ 	nf_conntrack_get_reasm(src->nfct_reasm);
+ #endif
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	dst->imq_flags = src->imq_flags;
++	dst->nf_queue_entry = src->nf_queue_entry;
++#endif
+ #ifdef CONFIG_BRIDGE_NETFILTER
+ 	dst->nf_bridge  = src->nf_bridge;
+ 	nf_bridge_get(src->nf_bridge);
+--- a/net/core/dev.c
++++ b/net/core/dev.c
+@@ -96,6 +96,9 @@
+ #include <net/net_namespace.h>
+ #include <net/sock.h>
+ #include <linux/rtnetlink.h>
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++#include <linux/imq.h>
++#endif
+ #include <linux/proc_fs.h>
+ #include <linux/seq_file.h>
+ #include <linux/stat.h>
+@@ -1678,7 +1681,11 @@ int dev_hard_start_xmit(struct sk_buff *
+ 	int rc;
+ 
+ 	if (likely(!skb->next)) {
+-		if (!list_empty(&ptype_all))
++		if (!list_empty(&ptype_all)
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++		    && !(skb->imq_flags & IMQ_F_ENQUEUE)
++#endif
++		    )
+ 			dev_queue_xmit_nit(skb, dev);
+ 
+ 		if (netif_needs_gso(dev, skb)) {
+@@ -1749,8 +1756,7 @@ u16 skb_tx_hash(const struct net_device 
+ }
+ EXPORT_SYMBOL(skb_tx_hash);
+ 
+-static struct netdev_queue *dev_pick_tx(struct net_device *dev,
+-					struct sk_buff *skb)
++struct netdev_queue *dev_pick_tx(struct net_device *dev, struct sk_buff *skb)
+ {
+ 	const struct net_device_ops *ops = dev->netdev_ops;
+ 	u16 queue_index = 0;
+@@ -1763,6 +1769,7 @@ static struct netdev_queue *dev_pick_tx(
+ 	skb_set_queue_mapping(skb, queue_index);
+ 	return netdev_get_tx_queue(dev, queue_index);
+ }
++EXPORT_SYMBOL(dev_pick_tx);
+ 
+ /**
+  *	dev_queue_xmit - transmit a buffer
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -1102,6 +1102,7 @@ extern int		dev_alloc_name(struct net_de
+ extern int		dev_open(struct net_device *dev);
+ extern int		dev_close(struct net_device *dev);
+ extern void		dev_disable_lro(struct net_device *dev);
++extern struct netdev_queue *dev_pick_tx(struct net_device *dev, struct sk_buff *skb);
+ extern int		dev_queue_xmit(struct sk_buff *skb);
+ extern int		register_netdevice(struct net_device *dev);
+ extern void		unregister_netdevice(struct net_device *dev);
+--- /dev/null
++++ b/include/linux/netfilter/xt_IMQ.h
+@@ -0,0 +1,9 @@
++#ifndef _XT_IMQ_H
++#define _XT_IMQ_H
++
++struct xt_imq_info {
++	unsigned int todev;     /* target imq device */
++};
++
++#endif /* _XT_IMQ_H */
++
+--- a/include/net/netfilter/nf_queue.h
++++ b/include/net/netfilter/nf_queue.h
+@@ -13,6 +13,12 @@ struct nf_queue_entry {
+ 	struct net_device	*indev;
+ 	struct net_device	*outdev;
+ 	int			(*okfn)(struct sk_buff *);
++
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	int			(*next_outfn)(struct nf_queue_entry *entry,
++					      unsigned int queuenum);
++	unsigned int		next_queuenum;
++#endif
+ };
+ 
+ #define nf_queue_entry_reroute(x) ((void *)x + sizeof(struct nf_queue_entry))
+@@ -30,5 +36,11 @@ extern int nf_unregister_queue_handler(u
+ 				       const struct nf_queue_handler *qh);
+ extern void nf_unregister_queue_handlers(const struct nf_queue_handler *qh);
+ extern void nf_reinject(struct nf_queue_entry *entry, unsigned int verdict);
++extern void nf_queue_entry_release_refs(struct nf_queue_entry *entry);
++
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++extern void nf_register_queue_imq_handler(const struct nf_queue_handler *qh);
++extern void nf_unregister_queue_imq_handler(void);
++#endif
+ 
+ #endif /* _NF_QUEUE_H */
+--- a/net/core/skbuff.c
++++ b/net/core/skbuff.c
+@@ -71,6 +71,9 @@
+ 
+ static struct kmem_cache *skbuff_head_cache __read_mostly;
+ static struct kmem_cache *skbuff_fclone_cache __read_mostly;
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++static struct kmem_cache *skbuff_cb_store_cache __read_mostly;
++#endif
+ 
+ static void sock_pipe_buf_release(struct pipe_inode_info *pipe,
+ 				  struct pipe_buffer *buf)
+@@ -90,6 +93,80 @@ static int sock_pipe_buf_steal(struct pi
+ 	return 1;
+ }
+ 
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++/* Control buffer save/restore for IMQ devices */
++struct skb_cb_table {
++	void			*cb_next;
++	atomic_t		refcnt;
++	char      		cb[48];
++};
++
++static DEFINE_SPINLOCK(skb_cb_store_lock);
++
++int skb_save_cb(struct sk_buff *skb)
++{
++	struct skb_cb_table *next;
++
++	next = kmem_cache_alloc(skbuff_cb_store_cache, GFP_ATOMIC);
++	if (!next)
++		return -ENOMEM;
++
++	BUILD_BUG_ON(sizeof(skb->cb) != sizeof(next->cb));
++
++	memcpy(next->cb, skb->cb, sizeof(skb->cb));
++	next->cb_next = skb->cb_next;
++
++	atomic_set(&next->refcnt, 1);
++
++	skb->cb_next = next;
++	return 0;
++}
++EXPORT_SYMBOL(skb_save_cb);
++
++int skb_restore_cb(struct sk_buff *skb)
++{
++	struct skb_cb_table *next;
++
++	if (!skb->cb_next)
++		return 0;
++
++	next = skb->cb_next;
++
++	BUILD_BUG_ON(sizeof(skb->cb) != sizeof(next->cb));
++
++	memcpy(skb->cb, next->cb, sizeof(skb->cb));
++	skb->cb_next = next->cb_next;
++
++	spin_lock(&skb_cb_store_lock);
++
++	if (atomic_dec_and_test(&next->refcnt)) {
++		kmem_cache_free(skbuff_cb_store_cache, next);
++	}
++
++	spin_unlock(&skb_cb_store_lock);
++
++	return 0;
++}
++EXPORT_SYMBOL(skb_restore_cb);
++
++static void skb_copy_stored_cb(struct sk_buff *new, struct sk_buff *old)
++{
++	struct skb_cb_table *next;
++
++	if (!old->cb_next) {
++		new->cb_next = 0;
++		return;
++	}
++
++	spin_lock(&skb_cb_store_lock);
++
++	next = old->cb_next;
++	atomic_inc(&next->refcnt);
++	new->cb_next = next;
++
++	spin_unlock(&skb_cb_store_lock);
++}
++#endif
+ 
+ /* Pipe buffer operations for a socket. */
+ static struct pipe_buf_operations sock_pipe_buf_ops = {
+@@ -389,6 +466,15 @@ static void skb_release_head_state(struc
+ 		WARN_ON(in_irq());
+ 		skb->destructor(skb);
+ 	}
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	/* This should not happen. When it does, avoid memleak by restoring
++	the chain of cb-backups. */
++	while(skb->cb_next != NULL) {
++		printk(KERN_WARNING "kfree_skb: skb->cb_next: %08x\n",
++			skb->cb_next);
++		skb_restore_cb(skb);
++	}
++#endif
+ #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
+ 	nf_conntrack_put(skb->nfct);
+ 	nf_conntrack_put_reasm(skb->nfct_reasm);
+@@ -526,6 +612,9 @@ static void __copy_skb_header(struct sk_
+ 	new->sp			= secpath_get(old->sp);
+ #endif
+ 	memcpy(new->cb, old->cb, sizeof(old->cb));
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	skb_copy_stored_cb(new, old);
++#endif
+ 	new->csum_start		= old->csum_start;
+ 	new->csum_offset	= old->csum_offset;
+ 	new->local_df		= old->local_df;
+@@ -2769,6 +2858,13 @@ void __init skb_init(void)
+ 						0,
+ 						SLAB_HWCACHE_ALIGN|SLAB_PANIC,
+ 						NULL);
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	skbuff_cb_store_cache = kmem_cache_create("skbuff_cb_store_cache",
++						  sizeof(struct skb_cb_table),
++						  0,
++						  SLAB_HWCACHE_ALIGN|SLAB_PANIC,
++						  NULL);
++#endif
+ }
+ 
+ /**
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -396,6 +396,18 @@ config NETFILTER_XT_TARGET_LED
+ 	  For more information on the LEDs available on your system, see
+ 	  Documentation/leds-class.txt
+ 
++config NETFILTER_XT_TARGET_IMQ
++        tristate '"IMQ" target support'
++	depends on NETFILTER_XTABLES
++	depends on IP_NF_MANGLE || IP6_NF_MANGLE
++	select IMQ
++	default m if NETFILTER_ADVANCED=n
++        help
++          This option adds a `IMQ' target which is used to specify if and
++          to which imq device packets should get enqueued/dequeued.
++
++          To compile it as a module, choose M here.  If unsure, say N.
++
+ config NETFILTER_XT_TARGET_MARK
+ 	tristate '"MARK" target support'
+ 	default m if NETFILTER_ADVANCED=n
+--- a/net/netfilter/Makefile
++++ b/net/netfilter/Makefile
+@@ -46,6 +46,7 @@ obj-$(CONFIG_NETFILTER_XT_TARGET_CONNMAR
+ obj-$(CONFIG_NETFILTER_XT_TARGET_CONNSECMARK) += xt_CONNSECMARK.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_DSCP) += xt_DSCP.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_HL) += xt_HL.o
++obj-$(CONFIG_NETFILTER_XT_TARGET_IMQ) += xt_IMQ.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_LED) += xt_LED.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_MARK) += xt_MARK.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_NFLOG) += xt_NFLOG.o
+--- a/net/netfilter/nf_queue.c
++++ b/net/netfilter/nf_queue.c
+@@ -20,6 +20,26 @@ static const struct nf_queue_handler *qu
+ 
+ static DEFINE_MUTEX(queue_handler_mutex);
+ 
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++static const struct nf_queue_handler *queue_imq_handler;
++
++void nf_register_queue_imq_handler(const struct nf_queue_handler *qh)
++{
++	mutex_lock(&queue_handler_mutex);
++	rcu_assign_pointer(queue_imq_handler, qh);
++	mutex_unlock(&queue_handler_mutex);
++}
++EXPORT_SYMBOL(nf_register_queue_imq_handler);
++
++void nf_unregister_queue_imq_handler(void)
++{
++	mutex_lock(&queue_handler_mutex);
++	rcu_assign_pointer(queue_imq_handler, NULL);
++	mutex_unlock(&queue_handler_mutex);
++}
++EXPORT_SYMBOL(nf_unregister_queue_imq_handler);
++#endif
++
+ /* return EBUSY when somebody else is registered, return EEXIST if the
+  * same handler is registered, return 0 in case of success. */
+ int nf_register_queue_handler(u_int8_t pf, const struct nf_queue_handler *qh)
+@@ -80,7 +100,7 @@ void nf_unregister_queue_handlers(const 
+ }
+ EXPORT_SYMBOL_GPL(nf_unregister_queue_handlers);
+ 
+-static void nf_queue_entry_release_refs(struct nf_queue_entry *entry)
++void nf_queue_entry_release_refs(struct nf_queue_entry *entry)
+ {
+ 	/* Release those devices we held, or Alexey will kill me. */
+ 	if (entry->indev)
+@@ -100,6 +120,7 @@ static void nf_queue_entry_release_refs(
+ 	/* Drop reference to owner of hook which queued us. */
+ 	module_put(entry->elem->owner);
+ }
++EXPORT_SYMBOL_GPL(nf_queue_entry_release_refs);
+ 
+ /*
+  * Any packet that leaves via this function must come back
+@@ -121,12 +142,26 @@ static int __nf_queue(struct sk_buff *sk
+ #endif
+ 	const struct nf_afinfo *afinfo;
+ 	const struct nf_queue_handler *qh;
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	const struct nf_queue_handler *qih = NULL;
++#endif
+ 
+ 	/* QUEUE == DROP if noone is waiting, to be safe. */
+ 	rcu_read_lock();
+ 
+ 	qh = rcu_dereference(queue_handler[pf]);
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++	if (pf == PF_INET || pf == PF_INET6)
++#else
++	if (pf == PF_INET)
++#endif
++		qih = rcu_dereference(queue_imq_handler);
++
++	if (!qh && !qih)
++#else /* !IMQ */
+ 	if (!qh)
++#endif
+ 		goto err_unlock;
+ 
+ 	afinfo = nf_get_afinfo(pf);
+@@ -145,6 +180,10 @@ static int __nf_queue(struct sk_buff *sk
+ 		.indev	= indev,
+ 		.outdev	= outdev,
+ 		.okfn	= okfn,
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++		.next_outfn = qh ? qh->outfn : NULL,
++		.next_queuenum = queuenum,
++#endif
+ 	};
+ 
+ 	/* If it's going away, ignore hook. */
+@@ -170,8 +209,19 @@ static int __nf_queue(struct sk_buff *sk
+ 	}
+ #endif
+ 	afinfo->saveroute(skb, entry);
++
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	if (qih) {
++		status = qih->outfn(entry, queuenum);
++		goto imq_skip_queue;
++	}
++#endif
++
+ 	status = qh->outfn(entry, queuenum);
+ 
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++imq_skip_queue:
++#endif
+ 	rcu_read_unlock();
+ 
+ 	if (status < 0) {
+--- /dev/null
++++ b/net/netfilter/xt_IMQ.c
+@@ -0,0 +1,73 @@
++/*
++ * This target marks packets to be enqueued to an imq device
++ */
++#include <linux/module.h>
++#include <linux/skbuff.h>
++#include <linux/netfilter/x_tables.h>
++#include <linux/netfilter/xt_IMQ.h>
++#include <linux/imq.h>
++
++static unsigned int imq_target(struct sk_buff *pskb,
++				const struct xt_target_param *par)
++{
++	const struct xt_imq_info *mr = par->targinfo;
++
++	pskb->imq_flags = (mr->todev & IMQ_F_IFMASK) | IMQ_F_ENQUEUE;
++
++	return XT_CONTINUE;
++}
++
++static bool imq_checkentry(const struct xt_tgchk_param *par)
++{
++	struct xt_imq_info *mr = par->targinfo;
++
++	if (mr->todev > IMQ_MAX_DEVS - 1) {
++		printk(KERN_WARNING
++		       "IMQ: invalid device specified, highest is %u\n",
++		       IMQ_MAX_DEVS - 1);
++		return 0;
++	}
++
++	return 1;
++}
++
++static struct xt_target xt_imq_reg[] __read_mostly = {
++	{
++		.name           = "IMQ",
++		.family		= AF_INET,
++		.checkentry     = imq_checkentry,
++		.target         = imq_target,
++		.targetsize	= sizeof(struct xt_imq_info),
++		.table		= "mangle",
++		.me             = THIS_MODULE
++	},
++	{
++		.name           = "IMQ",
++		.family		= AF_INET6,
++		.checkentry     = imq_checkentry,
++		.target         = imq_target,
++		.targetsize	= sizeof(struct xt_imq_info),
++		.table		= "mangle",
++		.me             = THIS_MODULE
++	},
++};
++
++static int __init imq_init(void)
++{
++	return xt_register_targets(xt_imq_reg, ARRAY_SIZE(xt_imq_reg));
++}
++
++static void __exit imq_fini(void)
++{
++	xt_unregister_targets(xt_imq_reg, ARRAY_SIZE(xt_imq_reg));
++}
++
++module_init(imq_init);
++module_exit(imq_fini);
++
++MODULE_AUTHOR("http://www.linuximq.net");
++MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See http://www.linuximq.net/ for more information.");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("ipt_IMQ");
++MODULE_ALIAS("ip6t_IMQ");
++
diff --git a/target/linux/generic/patches-2.6.30/180-netfilter_depends.patch b/target/linux/generic/patches-2.6.30/180-netfilter_depends.patch
new file mode 100644
index 0000000000..fc00d159c3
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/180-netfilter_depends.patch
@@ -0,0 +1,18 @@
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -160,7 +160,6 @@ config NF_CONNTRACK_FTP
+ 
+ config NF_CONNTRACK_H323
+ 	tristate "H.323 protocol support"
+-	depends on (IPV6 || IPV6=n)
+ 	depends on NETFILTER_ADVANCED
+ 	help
+ 	  H.323 is a VoIP signalling protocol from ITU-T. As one of the most
+@@ -505,7 +504,6 @@ config NETFILTER_XT_TARGET_SECMARK
+ 
+ config NETFILTER_XT_TARGET_TCPMSS
+ 	tristate '"TCPMSS" target support'
+-	depends on (IPV6 || IPV6=n)
+ 	default m if NETFILTER_ADVANCED=n
+ 	---help---
+ 	  This option adds a `TCPMSS' target, which allows you to alter the
diff --git a/target/linux/generic/patches-2.6.30/190-netfilter_rtsp.patch b/target/linux/generic/patches-2.6.30/190-netfilter_rtsp.patch
new file mode 100644
index 0000000000..29e82084ca
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/190-netfilter_rtsp.patch
@@ -0,0 +1,1366 @@
+--- /dev/null
++++ b/include/linux/netfilter/nf_conntrack_rtsp.h
+@@ -0,0 +1,63 @@
++/*
++ * RTSP extension for IP connection tracking.
++ * (C) 2003 by Tom Marshall <tmarshall at real.com>
++ * based on ip_conntrack_irc.h
++ *
++ *      This program is free software; you can redistribute it and/or
++ *      modify it under the terms of the GNU General Public License
++ *      as published by the Free Software Foundation; either version
++ *      2 of the License, or (at your option) any later version.
++ */
++#ifndef _IP_CONNTRACK_RTSP_H
++#define _IP_CONNTRACK_RTSP_H
++
++//#define IP_NF_RTSP_DEBUG 1
++#define IP_NF_RTSP_VERSION "0.6.21"
++
++#ifdef __KERNEL__
++/* port block types */
++typedef enum {
++    pb_single,  /* client_port=x */
++    pb_range,   /* client_port=x-y */
++    pb_discon   /* client_port=x/y (rtspbis) */
++} portblock_t;
++
++/* We record seq number and length of rtsp headers here, all in host order. */
++
++/*
++ * This structure is per expected connection.  It is a member of struct
++ * ip_conntrack_expect.  The TCP SEQ for the conntrack expect is stored
++ * there and we are expected to only store the length of the data which
++ * needs replaced.  If a packet contains multiple RTSP messages, we create
++ * one expected connection per message.
++ *
++ * We use these variables to mark the entire header block.  This may seem
++ * like overkill, but the nature of RTSP requires it.  A header may appear
++ * multiple times in a message.  We must treat two Transport headers the
++ * same as one Transport header with two entries.
++ */
++struct ip_ct_rtsp_expect
++{
++    u_int32_t   len;        /* length of header block */
++    portblock_t pbtype;     /* Type of port block that was requested */
++    u_int16_t   loport;     /* Port that was requested, low or first */
++    u_int16_t   hiport;     /* Port that was requested, high or second */
++#if 0
++    uint        method;     /* RTSP method */
++    uint        cseq;       /* CSeq from request */
++#endif
++};
++
++extern unsigned int (*nf_nat_rtsp_hook)(struct sk_buff *skb,
++				 enum ip_conntrack_info ctinfo,
++				 unsigned int matchoff, unsigned int matchlen,
++				 struct ip_ct_rtsp_expect *prtspexp,
++				 struct nf_conntrack_expect *exp);
++
++extern void (*nf_nat_rtsp_hook_expectfn)(struct nf_conn *ct, struct nf_conntrack_expect *exp);
++
++#define RTSP_PORT   554
++
++#endif /* __KERNEL__ */
++
++#endif /* _IP_CONNTRACK_RTSP_H */
+--- /dev/null
++++ b/include/linux/netfilter_helpers.h
+@@ -0,0 +1,133 @@
++/*
++ * Helpers for netfiler modules.  This file provides implementations for basic
++ * functions such as strncasecmp(), etc.
++ *
++ * gcc will warn for defined but unused functions, so we only include the
++ * functions requested.  The following macros are used:
++ *   NF_NEED_STRNCASECMP        nf_strncasecmp()
++ *   NF_NEED_STRTOU16           nf_strtou16()
++ *   NF_NEED_STRTOU32           nf_strtou32()
++ */
++#ifndef _NETFILTER_HELPERS_H
++#define _NETFILTER_HELPERS_H
++
++/* Only include these functions for kernel code. */
++#ifdef __KERNEL__
++
++#include <linux/ctype.h>
++#define iseol(c) ( (c) == '\r' || (c) == '\n' )
++
++/*
++ * The standard strncasecmp()
++ */
++#ifdef NF_NEED_STRNCASECMP
++static int
++nf_strncasecmp(const char* s1, const char* s2, u_int32_t len)
++{
++    if (s1 == NULL || s2 == NULL)
++    {
++        if (s1 == NULL && s2 == NULL)
++        {
++            return 0;
++        }
++        return (s1 == NULL) ? -1 : 1;
++    }
++    while (len > 0 && tolower(*s1) == tolower(*s2))
++    {
++        len--;
++        s1++;
++        s2++;
++    }
++    return ( (len == 0) ? 0 : (tolower(*s1) - tolower(*s2)) );
++}
++#endif /* NF_NEED_STRNCASECMP */
++
++/*
++ * Parse a string containing a 16-bit unsigned integer.
++ * Returns the number of chars used, or zero if no number is found.
++ */
++#ifdef NF_NEED_STRTOU16
++static int
++nf_strtou16(const char* pbuf, u_int16_t* pval)
++{
++    int n = 0;
++
++    *pval = 0;
++    while (isdigit(pbuf[n]))
++    {
++        *pval = (*pval * 10) + (pbuf[n] - '0');
++        n++;
++    }
++
++    return n;
++}
++#endif /* NF_NEED_STRTOU16 */
++
++/*
++ * Parse a string containing a 32-bit unsigned integer.
++ * Returns the number of chars used, or zero if no number is found.
++ */
++#ifdef NF_NEED_STRTOU32
++static int
++nf_strtou32(const char* pbuf, u_int32_t* pval)
++{
++    int n = 0;
++
++    *pval = 0;
++    while (pbuf[n] >= '0' && pbuf[n] <= '9')
++    {
++        *pval = (*pval * 10) + (pbuf[n] - '0');
++        n++;
++    }
++
++    return n;
++}
++#endif /* NF_NEED_STRTOU32 */
++
++/*
++ * Given a buffer and length, advance to the next line and mark the current
++ * line.
++ */
++#ifdef NF_NEED_NEXTLINE
++static int
++nf_nextline(char* p, uint len, uint* poff, uint* plineoff, uint* plinelen)
++{
++    uint    off = *poff;
++    uint    physlen = 0;
++
++    if (off >= len)
++    {
++        return 0;
++    }
++
++    while (p[off] != '\n')
++    {
++        if (len-off <= 1)
++        {
++            return 0;
++        }
++
++        physlen++;
++        off++;
++    }
++
++    /* if we saw a crlf, physlen needs adjusted */
++    if (physlen > 0 && p[off] == '\n' && p[off-1] == '\r')
++    {
++        physlen--;
++    }
++
++    /* advance past the newline */
++    off++;
++
++    *plineoff = *poff;
++    *plinelen = physlen;
++    *poff = off;
++
++    return 1;
++}
++#endif /* NF_NEED_NEXTLINE */
++
++#endif /* __KERNEL__ */
++
++#endif /* _NETFILTER_HELPERS_H */
+--- /dev/null
++++ b/include/linux/netfilter_mime.h
+@@ -0,0 +1,89 @@
++/*
++ * MIME functions for netfilter modules.  This file provides implementations
++ * for basic MIME parsing.  MIME headers are used in many protocols, such as
++ * HTTP, RTSP, SIP, etc.
++ *
++ * gcc will warn for defined but unused functions, so we only include the
++ * functions requested.  The following macros are used:
++ *   NF_NEED_MIME_NEXTLINE      nf_mime_nextline()
++ */
++#ifndef _NETFILTER_MIME_H
++#define _NETFILTER_MIME_H
++
++/* Only include these functions for kernel code. */
++#ifdef __KERNEL__
++
++#include <linux/ctype.h>
++
++/*
++ * Given a buffer and length, advance to the next line and mark the current
++ * line.  If the current line is empty, *plinelen will be set to zero.  If
++ * not, it will be set to the actual line length (including CRLF).
++ *
++ * 'line' in this context means logical line (includes LWS continuations).
++ * Returns 1 on success, 0 on failure.
++ */
++#ifdef NF_NEED_MIME_NEXTLINE
++static int
++nf_mime_nextline(char* p, uint len, uint* poff, uint* plineoff, uint* plinelen)
++{
++    uint    off = *poff;
++    uint    physlen = 0;
++    int     is_first_line = 1;
++
++    if (off >= len)
++    {
++        return 0;
++    }
++
++    do
++    {
++        while (p[off] != '\n')
++        {
++            if (len-off <= 1)
++            {
++                return 0;
++            }
++
++            physlen++;
++            off++;
++        }
++
++        /* if we saw a crlf, physlen needs adjusted */
++        if (physlen > 0 && p[off] == '\n' && p[off-1] == '\r')
++        {
++            physlen--;
++        }
++
++        /* advance past the newline */
++        off++;
++
++        /* check for an empty line */
++        if (physlen == 0)
++        {
++            break;
++        }
++
++        /* check for colon on the first physical line */
++        if (is_first_line)
++        {
++            is_first_line = 0;
++            if (memchr(p+(*poff), ':', physlen) == NULL)
++            {
++                return 0;
++            }
++        }
++    }
++    while (p[off] == ' ' || p[off] == '\t');
++
++    *plineoff = *poff;
++    *plinelen = (physlen == 0) ? 0 : (off - *poff);
++    *poff = off;
++
++    return 1;
++}
++#endif /* NF_NEED_MIME_NEXTLINE */
++
++#endif /* __KERNEL__ */
++
++#endif /* _NETFILTER_MIME_H */
+--- a/net/ipv4/netfilter/Makefile
++++ b/net/ipv4/netfilter/Makefile
+@@ -26,6 +26,7 @@ obj-$(CONFIG_NF_NAT_AMANDA) += nf_nat_am
+ obj-$(CONFIG_NF_NAT_FTP) += nf_nat_ftp.o
+ obj-$(CONFIG_NF_NAT_H323) += nf_nat_h323.o
+ obj-$(CONFIG_NF_NAT_IRC) += nf_nat_irc.o
++obj-$(CONFIG_NF_NAT_RTSP) += nf_nat_rtsp.o
+ obj-$(CONFIG_NF_NAT_PPTP) += nf_nat_pptp.o
+ obj-$(CONFIG_NF_NAT_SIP) += nf_nat_sip.o
+ obj-$(CONFIG_NF_NAT_SNMP_BASIC) += nf_nat_snmp_basic.o
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -267,6 +267,16 @@ config NF_CONNTRACK_TFTP
+ 
+ 	  To compile it as a module, choose M here.  If unsure, say N.
+ 
++config NF_CONNTRACK_RTSP
++	tristate "RTSP protocol support"
++	depends on NF_CONNTRACK
++	help
++		Support the RTSP protocol.  This allows UDP transports to be setup
++		properly, including RTP and RDT.
++
++		If you want to compile it as a module, say 'M' here and read
++		Documentation/modules.txt.  If unsure, say 'Y'.
++
+ config NF_CT_NETLINK
+ 	tristate 'Connection tracking netlink interface'
+ 	select NETFILTER_NETLINK
+--- a/net/netfilter/Makefile
++++ b/net/netfilter/Makefile
+@@ -33,6 +33,7 @@ obj-$(CONFIG_NF_CONNTRACK_PPTP) += nf_co
+ obj-$(CONFIG_NF_CONNTRACK_SANE) += nf_conntrack_sane.o
+ obj-$(CONFIG_NF_CONNTRACK_SIP) += nf_conntrack_sip.o
+ obj-$(CONFIG_NF_CONNTRACK_TFTP) += nf_conntrack_tftp.o
++obj-$(CONFIG_NF_CONNTRACK_RTSP) += nf_conntrack_rtsp.o
+ 
+ # transparent proxy support
+ obj-$(CONFIG_NETFILTER_TPROXY) += nf_tproxy_core.o
+--- a/net/ipv4/netfilter/Kconfig
++++ b/net/ipv4/netfilter/Kconfig
+@@ -257,6 +257,11 @@ config NF_NAT_IRC
+ 	depends on NF_CONNTRACK && NF_NAT
+ 	default NF_NAT && NF_CONNTRACK_IRC
+ 
++config NF_NAT_RTSP
++	tristate
++ 	depends on IP_NF_IPTABLES && NF_CONNTRACK && NF_NAT
++ 	default NF_NAT && NF_CONNTRACK_RTSP
++
+ config NF_NAT_TFTP
+ 	tristate
+ 	depends on NF_CONNTRACK && NF_NAT
+--- /dev/null
++++ b/net/netfilter/nf_conntrack_rtsp.c
+@@ -0,0 +1,517 @@
++/*
++ * RTSP extension for IP connection tracking
++ * (C) 2003 by Tom Marshall <tmarshall at real.com>
++ * based on ip_conntrack_irc.c
++ *
++ *      This program is free software; you can redistribute it and/or
++ *      modify it under the terms of the GNU General Public License
++ *      as published by the Free Software Foundation; either version
++ *      2 of the License, or (at your option) any later version.
++ *
++ * Module load syntax:
++ *   insmod nf_conntrack_rtsp.o ports=port1,port2,...port<MAX_PORTS>
++ *                              max_outstanding=n setup_timeout=secs
++ *
++ * If no ports are specified, the default will be port 554.
++ *
++ * With max_outstanding you can define the maximum number of not yet
++ * answered SETUP requests per RTSP session (default 8).
++ * With setup_timeout you can specify how long the system waits for
++ * an expected data channel (default 300 seconds).
++ *
++ * 2005-02-13: Harald Welte <laforge at netfilter.org>
++ * 	- port to 2.6
++ * 	- update to recent post-2.6.11 api changes
++ * 2006-09-14: Steven Van Acker <deepstar at singularity.be>
++ *      - removed calls to NAT code from conntrack helper: NAT no longer needed to use rtsp-conntrack
++ * 2007-04-18: Michael Guntsche <mike at it-loops.com>
++ * 			- Port to new NF API
++ */
++
++#include <linux/module.h>
++#include <linux/netfilter.h>
++#include <linux/ip.h>
++#include <linux/inet.h>
++#include <net/tcp.h>
++
++#include <net/netfilter/nf_conntrack.h>
++#include <net/netfilter/nf_conntrack_expect.h>
++#include <net/netfilter/nf_conntrack_helper.h>
++#include <linux/netfilter/nf_conntrack_rtsp.h>
++
++#define NF_NEED_STRNCASECMP
++#define NF_NEED_STRTOU16
++#define NF_NEED_STRTOU32
++#define NF_NEED_NEXTLINE
++#include <linux/netfilter_helpers.h>
++#define NF_NEED_MIME_NEXTLINE
++#include <linux/netfilter_mime.h>
++
++#include <linux/ctype.h>
++#define MAX_SIMUL_SETUP 8 /* XXX: use max_outstanding */
++#define INFOP(fmt, args...) printk(KERN_INFO "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
++#if 0
++#define DEBUGP(fmt, args...) printk(KERN_DEBUG "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
++#else
++#define DEBUGP(fmt, args...)
++#endif
++
++#define MAX_PORTS 8
++static int ports[MAX_PORTS];
++static int num_ports = 0;
++static int max_outstanding = 8;
++static unsigned int setup_timeout = 300;
++
++MODULE_AUTHOR("Tom Marshall <tmarshall at real.com>");
++MODULE_DESCRIPTION("RTSP connection tracking module");
++MODULE_LICENSE("GPL");
++module_param_array(ports, int, &num_ports, 0400);
++MODULE_PARM_DESC(ports, "port numbers of RTSP servers");
++module_param(max_outstanding, int, 0400);
++MODULE_PARM_DESC(max_outstanding, "max number of outstanding SETUP requests per RTSP session");
++module_param(setup_timeout, int, 0400);
++MODULE_PARM_DESC(setup_timeout, "timeout on for unestablished data channels");
++
++static char *rtsp_buffer;
++static DEFINE_SPINLOCK(rtsp_buffer_lock);
++
++unsigned int (*nf_nat_rtsp_hook)(struct sk_buff *skb,
++				 enum ip_conntrack_info ctinfo,
++				 unsigned int matchoff, unsigned int matchlen,struct ip_ct_rtsp_expect* prtspexp,
++				 struct nf_conntrack_expect *exp);
++void (*nf_nat_rtsp_hook_expectfn)(struct nf_conn *ct, struct nf_conntrack_expect *exp);
++
++EXPORT_SYMBOL_GPL(nf_nat_rtsp_hook);
++
++/*
++ * Max mappings we will allow for one RTSP connection (for RTP, the number
++ * of allocated ports is twice this value).  Note that SMIL burns a lot of
++ * ports so keep this reasonably high.  If this is too low, you will see a
++ * lot of "no free client map entries" messages.
++ */
++#define MAX_PORT_MAPS 16
++
++/*** default port list was here in the masq code: 554, 3030, 4040 ***/
++
++#define SKIP_WSPACE(ptr,len,off) while(off < len && isspace(*(ptr+off))) { off++; }
++
++/*
++ * Parse an RTSP packet.
++ *
++ * Returns zero if parsing failed.
++ *
++ * Parameters:
++ *  IN      ptcp        tcp data pointer
++ *  IN      tcplen      tcp data len
++ *  IN/OUT  ptcpoff     points to current tcp offset
++ *  OUT     phdrsoff    set to offset of rtsp headers
++ *  OUT     phdrslen    set to length of rtsp headers
++ *  OUT     pcseqoff    set to offset of CSeq header
++ *  OUT     pcseqlen    set to length of CSeq header
++ */
++static int
++rtsp_parse_message(char* ptcp, uint tcplen, uint* ptcpoff,
++                   uint* phdrsoff, uint* phdrslen,
++                   uint* pcseqoff, uint* pcseqlen,
++                   uint* transoff, uint* translen)
++{
++	uint    entitylen = 0;
++	uint    lineoff;
++	uint    linelen;
++
++	if (!nf_nextline(ptcp, tcplen, ptcpoff, &lineoff, &linelen))
++		return 0;
++
++	*phdrsoff = *ptcpoff;
++	while (nf_mime_nextline(ptcp, tcplen, ptcpoff, &lineoff, &linelen)) {
++		if (linelen == 0) {
++			if (entitylen > 0)
++				*ptcpoff += min(entitylen, tcplen - *ptcpoff);
++			break;
++		}
++		if (lineoff+linelen > tcplen) {
++			INFOP("!! overrun !!\n");
++			break;
++		}
++
++		if (nf_strncasecmp(ptcp+lineoff, "CSeq:", 5) == 0) {
++			*pcseqoff = lineoff;
++			*pcseqlen = linelen;
++		}
++
++		if (nf_strncasecmp(ptcp+lineoff, "Transport:", 10) == 0) {
++			*transoff = lineoff;
++			*translen = linelen;
++		}
++
++		if (nf_strncasecmp(ptcp+lineoff, "Content-Length:", 15) == 0) {
++			uint off = lineoff+15;
++			SKIP_WSPACE(ptcp+lineoff, linelen, off);
++			nf_strtou32(ptcp+off, &entitylen);
++		}
++	}
++	*phdrslen = (*ptcpoff) - (*phdrsoff);
++
++	return 1;
++}
++
++/*
++ * Find lo/hi client ports (if any) in transport header
++ * In:
++ *   ptcp, tcplen = packet
++ *   tranoff, tranlen = buffer to search
++ *
++ * Out:
++ *   pport_lo, pport_hi = lo/hi ports (host endian)
++ *
++ * Returns nonzero if any client ports found
++ *
++ * Note: it is valid (and expected) for the client to request multiple
++ * transports, so we need to parse the entire line.
++ */
++static int
++rtsp_parse_transport(char* ptran, uint tranlen,
++                     struct ip_ct_rtsp_expect* prtspexp)
++{
++	int     rc = 0;
++	uint    off = 0;
++
++	if (tranlen < 10 || !iseol(ptran[tranlen-1]) ||
++	    nf_strncasecmp(ptran, "Transport:", 10) != 0) {
++		INFOP("sanity check failed\n");
++		return 0;
++	}
++
++	DEBUGP("tran='%.*s'\n", (int)tranlen, ptran);
++	off += 10;
++	SKIP_WSPACE(ptran, tranlen, off);
++
++	/* Transport: tran;field;field=val,tran;field;field=val,... */
++	while (off < tranlen) {
++		const char* pparamend;
++		uint        nextparamoff;
++
++		pparamend = memchr(ptran+off, ',', tranlen-off);
++		pparamend = (pparamend == NULL) ? ptran+tranlen : pparamend+1;
++		nextparamoff = pparamend-ptran;
++
++		while (off < nextparamoff) {
++			const char* pfieldend;
++			uint        nextfieldoff;
++
++			pfieldend = memchr(ptran+off, ';', nextparamoff-off);
++			nextfieldoff = (pfieldend == NULL) ? nextparamoff : pfieldend-ptran+1;
++
++			if (strncmp(ptran+off, "client_port=", 12) == 0) {
++				u_int16_t   port;
++				uint        numlen;
++
++				off += 12;
++				numlen = nf_strtou16(ptran+off, &port);
++				off += numlen;
++				if (prtspexp->loport != 0 && prtspexp->loport != port)
++					DEBUGP("multiple ports found, port %hu ignored\n", port);
++				else {
++					DEBUGP("lo port found : %hu\n", port);
++					prtspexp->loport = prtspexp->hiport = port;
++					if (ptran[off] == '-') {
++						off++;
++						numlen = nf_strtou16(ptran+off, &port);
++						off += numlen;
++						prtspexp->pbtype = pb_range;
++						prtspexp->hiport = port;
++
++						// If we have a range, assume rtp:
++						// loport must be even, hiport must be loport+1
++						if ((prtspexp->loport & 0x0001) != 0 ||
++						    prtspexp->hiport != prtspexp->loport+1) {
++							DEBUGP("incorrect range: %hu-%hu, correcting\n",
++							       prtspexp->loport, prtspexp->hiport);
++							prtspexp->loport &= 0xfffe;
++							prtspexp->hiport = prtspexp->loport+1;
++						}
++					} else if (ptran[off] == '/') {
++						off++;
++						numlen = nf_strtou16(ptran+off, &port);
++						off += numlen;
++						prtspexp->pbtype = pb_discon;
++						prtspexp->hiport = port;
++					}
++					rc = 1;
++				}
++			}
++
++			/*
++			 * Note we don't look for the destination parameter here.
++			 * If we are using NAT, the NAT module will handle it.  If not,
++			 * and the client is sending packets elsewhere, the expectation
++			 * will quietly time out.
++			 */
++
++			off = nextfieldoff;
++		}
++
++		off = nextparamoff;
++	}
++
++	return rc;
++}
++
++void expected(struct nf_conn *ct, struct nf_conntrack_expect *exp)
++{
++    if(nf_nat_rtsp_hook_expectfn) {
++        nf_nat_rtsp_hook_expectfn(ct,exp);
++    }
++}
++
++/*** conntrack functions ***/
++
++/* outbound packet: client->server */
++
++static inline int
++help_out(struct sk_buff *skb, unsigned char *rb_ptr, unsigned int datalen,
++                struct nf_conn *ct, enum ip_conntrack_info ctinfo)
++{
++	struct ip_ct_rtsp_expect expinfo;
++
++	int dir = CTINFO2DIR(ctinfo);   /* = IP_CT_DIR_ORIGINAL */
++	//struct  tcphdr* tcph = (void*)iph + iph->ihl * 4;
++	//uint    tcplen = pktlen - iph->ihl * 4;
++	char*   pdata = rb_ptr;
++	//uint    datalen = tcplen - tcph->doff * 4;
++	uint    dataoff = 0;
++	int ret = NF_ACCEPT;
++
++	struct nf_conntrack_expect *exp;
++
++	__be16 be_loport;
++
++	memset(&expinfo, 0, sizeof(expinfo));
++
++	while (dataoff < datalen) {
++		uint    cmdoff = dataoff;
++		uint    hdrsoff = 0;
++		uint    hdrslen = 0;
++		uint    cseqoff = 0;
++		uint    cseqlen = 0;
++		uint    transoff = 0;
++		uint    translen = 0;
++		uint    off;
++
++		if (!rtsp_parse_message(pdata, datalen, &dataoff,
++					&hdrsoff, &hdrslen,
++					&cseqoff, &cseqlen,
++					&transoff, &translen))
++			break;      /* not a valid message */
++
++		if (strncmp(pdata+cmdoff, "SETUP ", 6) != 0)
++			continue;   /* not a SETUP message */
++		DEBUGP("found a setup message\n");
++
++		off = 0;
++		if(translen) {
++			rtsp_parse_transport(pdata+transoff, translen, &expinfo);
++		}
++
++		if (expinfo.loport == 0) {
++			DEBUGP("no udp transports found\n");
++			continue;   /* no udp transports found */
++		}
++
++		DEBUGP("udp transport found, ports=(%d,%hu,%hu)\n",
++		       (int)expinfo.pbtype, expinfo.loport, expinfo.hiport);
++
++		exp = nf_ct_expect_alloc(ct);
++		if (!exp) {
++			ret = NF_DROP;
++			goto out;
++		}
++
++		be_loport = htons(expinfo.loport);
++
++		nf_ct_expect_init(exp, NF_CT_EXPECT_CLASS_DEFAULT,
++			ct->tuplehash[!dir].tuple.src.l3num,
++			&ct->tuplehash[!dir].tuple.src.u3, &ct->tuplehash[!dir].tuple.dst.u3,
++			IPPROTO_UDP, NULL, &be_loport);
++
++		exp->master = ct;
++
++		exp->expectfn = expected;
++		exp->flags = 0;
++
++		if (expinfo.pbtype == pb_range) {
++			DEBUGP("Changing expectation mask to handle multiple ports\n");
++			exp->mask.src.u.udp.port  = 0xfffe;
++		}
++
++		DEBUGP("expect_related %u.%u.%u.%u:%u-%u.%u.%u.%u:%u\n",
++		       NIPQUAD(exp->tuple.src.u3.ip),
++		       ntohs(exp->tuple.src.u.udp.port),
++		       NIPQUAD(exp->tuple.dst.u3.ip),
++		       ntohs(exp->tuple.dst.u.udp.port));
++
++		if (nf_nat_rtsp_hook)
++			/* pass the request off to the nat helper */
++			ret = nf_nat_rtsp_hook(skb, ctinfo, hdrsoff, hdrslen, &expinfo, exp);
++		else if (nf_ct_expect_related(exp) != 0) {
++			INFOP("nf_ct_expect_related failed\n");
++			ret  = NF_DROP;
++		}
++		nf_ct_expect_put(exp);
++		goto out;
++	}
++out:
++
++	return ret;
++}
++
++
++static inline int
++help_in(struct sk_buff *skb, size_t pktlen,
++ struct nf_conn* ct, enum ip_conntrack_info ctinfo)
++{
++ return NF_ACCEPT;
++}
++
++static int help(struct sk_buff *skb, unsigned int protoff,
++		struct nf_conn *ct, enum ip_conntrack_info ctinfo)
++{
++	struct tcphdr _tcph, *th;
++	unsigned int dataoff, datalen;
++	char *rb_ptr;
++	int ret = NF_DROP;
++
++	/* Until there's been traffic both ways, don't look in packets. */
++	if (ctinfo != IP_CT_ESTABLISHED &&
++	    ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY) {
++		DEBUGP("conntrackinfo = %u\n", ctinfo);
++		return NF_ACCEPT;
++	}
++
++	/* Not whole TCP header? */
++	th = skb_header_pointer(skb, protoff, sizeof(_tcph), &_tcph);
++
++	if (!th)
++		return NF_ACCEPT;
++
++	/* No data ? */
++	dataoff = protoff + th->doff*4;
++	datalen = skb->len - dataoff;
++	if (dataoff >= skb->len)
++		return NF_ACCEPT;
++
++	spin_lock_bh(&rtsp_buffer_lock);
++	rb_ptr = skb_header_pointer(skb, dataoff,
++				    skb->len - dataoff, rtsp_buffer);
++	BUG_ON(rb_ptr == NULL);
++
++#if 0
++	/* Checksum invalid?  Ignore. */
++	/* FIXME: Source route IP option packets --RR */
++	if (tcp_v4_check(tcph, tcplen, iph->saddr, iph->daddr,
++			 csum_partial((char*)tcph, tcplen, 0)))
++	{
++		DEBUGP("bad csum: %p %u %u.%u.%u.%u %u.%u.%u.%u\n",
++		       tcph, tcplen, NIPQUAD(iph->saddr), NIPQUAD(iph->daddr));
++		return NF_ACCEPT;
++	}
++#endif
++
++	switch (CTINFO2DIR(ctinfo)) {
++	case IP_CT_DIR_ORIGINAL:
++		ret = help_out(skb, rb_ptr, datalen, ct, ctinfo);
++		break;
++	case IP_CT_DIR_REPLY:
++		DEBUGP("IP_CT_DIR_REPLY\n");
++		/* inbound packet: server->client */
++		ret = NF_ACCEPT;
++		break;
++	}
++
++	spin_unlock_bh(&rtsp_buffer_lock);
++
++	return ret;
++}
++
++static struct nf_conntrack_helper rtsp_helpers[MAX_PORTS];
++static char rtsp_names[MAX_PORTS][10];
++static struct nf_conntrack_expect_policy rtsp_expect_policy;
++
++/* This function is intentionally _NOT_ defined as __exit */
++static void
++fini(void)
++{
++	int i;
++	for (i = 0; i < num_ports; i++) {
++		DEBUGP("unregistering port %d\n", ports[i]);
++		nf_conntrack_helper_unregister(&rtsp_helpers[i]);
++	}
++	kfree(rtsp_buffer);
++}
++
++static int __init
++init(void)
++{
++	int i, ret;
++	struct nf_conntrack_helper *hlpr;
++	char *tmpname;
++
++	printk("nf_conntrack_rtsp v" IP_NF_RTSP_VERSION " loading\n");
++
++	if (max_outstanding < 1) {
++		printk("nf_conntrack_rtsp: max_outstanding must be a positive integer\n");
++		return -EBUSY;
++	}
++	if (setup_timeout < 0) {
++		printk("nf_conntrack_rtsp: setup_timeout must be a positive integer\n");
++		return -EBUSY;
++	}
++
++	rtsp_expect_policy.max_expected = max_outstanding;
++	rtsp_expect_policy.timeout = setup_timeout;
++
++	rtsp_buffer = kmalloc(65536, GFP_KERNEL);
++	if (!rtsp_buffer)
++		return -ENOMEM;
++
++	/* If no port given, default to standard rtsp port */
++	if (ports[0] == 0) {
++		ports[0] = RTSP_PORT;
++	}
++
++	for (i = 0; (i < MAX_PORTS) && ports[i]; i++) {
++		hlpr = &rtsp_helpers[i];
++		memset(hlpr, 0, sizeof(struct nf_conntrack_helper));
++		hlpr->tuple.src.u.tcp.port = htons(ports[i]);
++		hlpr->tuple.dst.protonum = IPPROTO_TCP;
++		hlpr->expect_policy = &rtsp_expect_policy;
++		hlpr->me = THIS_MODULE;
++		hlpr->help = help;
++
++		tmpname = &rtsp_names[i][0];
++		if (ports[i] == RTSP_PORT) {
++			sprintf(tmpname, "rtsp");
++		} else {
++			sprintf(tmpname, "rtsp-%d", i);
++		}
++		hlpr->name = tmpname;
++
++		DEBUGP("port #%d: %d\n", i, ports[i]);
++
++		ret = nf_conntrack_helper_register(hlpr);
++
++		if (ret) {
++			printk("nf_conntrack_rtsp: ERROR registering port %d\n", ports[i]);
++			fini();
++			return -EBUSY;
++		}
++		num_ports++;
++	}
++	return 0;
++}
++
++module_init(init);
++module_exit(fini);
++
++EXPORT_SYMBOL(nf_nat_rtsp_hook_expectfn);
++
+--- /dev/null
++++ b/net/ipv4/netfilter/nf_nat_rtsp.c
+@@ -0,0 +1,496 @@
++/*
++ * RTSP extension for TCP NAT alteration
++ * (C) 2003 by Tom Marshall <tmarshall at real.com>
++ * based on ip_nat_irc.c
++ *
++ *      This program is free software; you can redistribute it and/or
++ *      modify it under the terms of the GNU General Public License
++ *      as published by the Free Software Foundation; either version
++ *      2 of the License, or (at your option) any later version.
++ *
++ * Module load syntax:
++ *      insmod nf_nat_rtsp.o ports=port1,port2,...port<MAX_PORTS>
++ *                           stunaddr=<address>
++ *                           destaction=[auto|strip|none]
++ *
++ * If no ports are specified, the default will be port 554 only.
++ *
++ * stunaddr specifies the address used to detect that a client is using STUN.
++ * If this address is seen in the destination parameter, it is assumed that
++ * the client has already punched a UDP hole in the firewall, so we don't
++ * mangle the client_port.  If none is specified, it is autodetected.  It
++ * only needs to be set if you have multiple levels of NAT.  It should be
++ * set to the external address that the STUN clients detect.  Note that in
++ * this case, it will not be possible for clients to use UDP with servers
++ * between the NATs.
++ *
++ * If no destaction is specified, auto is used.
++ *   destaction=auto:  strip destination parameter if it is not stunaddr.
++ *   destaction=strip: always strip destination parameter (not recommended).
++ *   destaction=none:  do not touch destination parameter (not recommended).
++ */
++
++#include <linux/module.h>
++#include <net/tcp.h>
++#include <net/netfilter/nf_nat_helper.h>
++#include <net/netfilter/nf_nat_rule.h>
++#include <linux/netfilter/nf_conntrack_rtsp.h>
++#include <net/netfilter/nf_conntrack_expect.h>
++
++#include <linux/inet.h>
++#include <linux/ctype.h>
++#define NF_NEED_STRNCASECMP
++#define NF_NEED_STRTOU16
++#include <linux/netfilter_helpers.h>
++#define NF_NEED_MIME_NEXTLINE
++#include <linux/netfilter_mime.h>
++
++#define INFOP(fmt, args...) printk(KERN_INFO "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
++#if 0
++#define DEBUGP(fmt, args...) printk(KERN_DEBUG "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
++#else
++#define DEBUGP(fmt, args...)
++#endif
++
++#define MAX_PORTS       8
++#define DSTACT_AUTO     0
++#define DSTACT_STRIP    1
++#define DSTACT_NONE     2
++
++static char*    stunaddr = NULL;
++static char*    destaction = NULL;
++
++static u_int32_t extip = 0;
++static int       dstact = 0;
++
++MODULE_AUTHOR("Tom Marshall <tmarshall at real.com>");
++MODULE_DESCRIPTION("RTSP network address translation module");
++MODULE_LICENSE("GPL");
++module_param(stunaddr, charp, 0644);
++MODULE_PARM_DESC(stunaddr, "Address for detecting STUN");
++module_param(destaction, charp, 0644);
++MODULE_PARM_DESC(destaction, "Action for destination parameter (auto/strip/none)");
++
++#define SKIP_WSPACE(ptr,len,off) while(off < len && isspace(*(ptr+off))) { off++; }
++
++/*** helper functions ***/
++
++static void
++get_skb_tcpdata(struct sk_buff* skb, char** pptcpdata, uint* ptcpdatalen)
++{
++    struct iphdr*   iph  = ip_hdr(skb);
++    struct tcphdr*  tcph = (void *)iph + ip_hdrlen(skb);
++
++    *pptcpdata = (char*)tcph +  tcph->doff*4;
++    *ptcpdatalen = ((char*)skb_transport_header(skb) + skb->len) - *pptcpdata;
++}
++
++/*** nat functions ***/
++
++/*
++ * Mangle the "Transport:" header:
++ *   - Replace all occurences of "client_port=<spec>"
++ *   - Handle destination parameter
++ *
++ * In:
++ *   ct, ctinfo = conntrack context
++ *   skb        = packet
++ *   tranoff    = Transport header offset from TCP data
++ *   tranlen    = Transport header length (incl. CRLF)
++ *   rport_lo   = replacement low  port (host endian)
++ *   rport_hi   = replacement high port (host endian)
++ *
++ * Returns packet size difference.
++ *
++ * Assumes that a complete transport header is present, ending with CR or LF
++ */
++static int
++rtsp_mangle_tran(enum ip_conntrack_info ctinfo,
++                 struct nf_conntrack_expect* exp,
++								 struct ip_ct_rtsp_expect* prtspexp,
++                 struct sk_buff* skb, uint tranoff, uint tranlen)
++{
++    char*       ptcp;
++    uint        tcplen;
++    char*       ptran;
++    char        rbuf1[16];      /* Replacement buffer (one port) */
++    uint        rbuf1len;       /* Replacement len (one port) */
++    char        rbufa[16];      /* Replacement buffer (all ports) */
++    uint        rbufalen;       /* Replacement len (all ports) */
++    u_int32_t   newip;
++    u_int16_t   loport, hiport;
++    uint        off = 0;
++    uint        diff;           /* Number of bytes we removed */
++
++    struct nf_conn *ct = exp->master;
++    struct nf_conntrack_tuple *t;
++
++    char    szextaddr[15+1];
++    uint    extaddrlen;
++    int     is_stun;
++
++    get_skb_tcpdata(skb, &ptcp, &tcplen);
++    ptran = ptcp+tranoff;
++
++    if (tranoff+tranlen > tcplen || tcplen-tranoff < tranlen ||
++        tranlen < 10 || !iseol(ptran[tranlen-1]) ||
++        nf_strncasecmp(ptran, "Transport:", 10) != 0)
++    {
++        INFOP("sanity check failed\n");
++        return 0;
++    }
++    off += 10;
++    SKIP_WSPACE(ptcp+tranoff, tranlen, off);
++
++    newip = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip;
++    t = &exp->tuple;
++    t->dst.u3.ip = newip;
++
++    extaddrlen = extip ? sprintf(szextaddr, "%u.%u.%u.%u", NIPQUAD(extip))
++                       : sprintf(szextaddr, "%u.%u.%u.%u", NIPQUAD(newip));
++    DEBUGP("stunaddr=%s (%s)\n", szextaddr, (extip?"forced":"auto"));
++
++    rbuf1len = rbufalen = 0;
++    switch (prtspexp->pbtype)
++    {
++    case pb_single:
++        for (loport = prtspexp->loport; loport != 0; loport++) /* XXX: improper wrap? */
++        {
++            t->dst.u.udp.port = htons(loport);
++            if (nf_ct_expect_related(exp) == 0)
++            {
++                DEBUGP("using port %hu\n", loport);
++                break;
++            }
++        }
++        if (loport != 0)
++        {
++            rbuf1len = sprintf(rbuf1, "%hu", loport);
++            rbufalen = sprintf(rbufa, "%hu", loport);
++        }
++        break;
++    case pb_range:
++        for (loport = prtspexp->loport; loport != 0; loport += 2) /* XXX: improper wrap? */
++        {
++            t->dst.u.udp.port = htons(loport);
++            if (nf_ct_expect_related(exp) == 0)
++            {
++                hiport = loport + ~exp->mask.src.u.udp.port;
++                DEBUGP("using ports %hu-%hu\n", loport, hiport);
++                break;
++            }
++        }
++        if (loport != 0)
++        {
++            rbuf1len = sprintf(rbuf1, "%hu", loport);
++            rbufalen = sprintf(rbufa, "%hu-%hu", loport, loport+1);
++        }
++        break;
++    case pb_discon:
++        for (loport = prtspexp->loport; loport != 0; loport++) /* XXX: improper wrap? */
++        {
++            t->dst.u.udp.port = htons(loport);
++            if (nf_ct_expect_related(exp) == 0)
++            {
++                DEBUGP("using port %hu (1 of 2)\n", loport);
++                break;
++            }
++        }
++        for (hiport = prtspexp->hiport; hiport != 0; hiport++) /* XXX: improper wrap? */
++        {
++            t->dst.u.udp.port = htons(hiport);
++            if (nf_ct_expect_related(exp) == 0)
++            {
++                DEBUGP("using port %hu (2 of 2)\n", hiport);
++                break;
++            }
++        }
++        if (loport != 0 && hiport != 0)
++        {
++            rbuf1len = sprintf(rbuf1, "%hu", loport);
++            if (hiport == loport+1)
++            {
++                rbufalen = sprintf(rbufa, "%hu-%hu", loport, hiport);
++            }
++            else
++            {
++                rbufalen = sprintf(rbufa, "%hu/%hu", loport, hiport);
++            }
++        }
++        break;
++    }
++
++    if (rbuf1len == 0)
++    {
++        return 0;   /* cannot get replacement port(s) */
++    }
++
++    /* Transport: tran;field;field=val,tran;field;field=val,... */
++    while (off < tranlen)
++    {
++        uint        saveoff;
++        const char* pparamend;
++        uint        nextparamoff;
++
++        pparamend = memchr(ptran+off, ',', tranlen-off);
++        pparamend = (pparamend == NULL) ? ptran+tranlen : pparamend+1;
++        nextparamoff = pparamend-ptcp;
++
++        /*
++         * We pass over each param twice.  On the first pass, we look for a
++         * destination= field.  It is handled by the security policy.  If it
++         * is present, allowed, and equal to our external address, we assume
++         * that STUN is being used and we leave the client_port= field alone.
++         */
++        is_stun = 0;
++        saveoff = off;
++        while (off < nextparamoff)
++        {
++            const char* pfieldend;
++            uint        nextfieldoff;
++
++            pfieldend = memchr(ptran+off, ';', nextparamoff-off);
++            nextfieldoff = (pfieldend == NULL) ? nextparamoff : pfieldend-ptran+1;
++
++            if (dstact != DSTACT_NONE && strncmp(ptran+off, "destination=", 12) == 0)
++            {
++                if (strncmp(ptran+off+12, szextaddr, extaddrlen) == 0)
++                {
++                    is_stun = 1;
++                }
++                if (dstact == DSTACT_STRIP || (dstact == DSTACT_AUTO && !is_stun))
++                {
++                    diff = nextfieldoff-off;
++                    if (!nf_nat_mangle_tcp_packet(skb, ct, ctinfo,
++                                                         off, diff, NULL, 0))
++                    {
++                        /* mangle failed, all we can do is bail */
++			nf_ct_unexpect_related(exp);
++                        return 0;
++                    }
++                    get_skb_tcpdata(skb, &ptcp, &tcplen);
++                    ptran = ptcp+tranoff;
++                    tranlen -= diff;
++                    nextparamoff -= diff;
++                    nextfieldoff -= diff;
++                }
++            }
++
++            off = nextfieldoff;
++        }
++        if (is_stun)
++        {
++            continue;
++        }
++        off = saveoff;
++        while (off < nextparamoff)
++        {
++            const char* pfieldend;
++            uint        nextfieldoff;
++
++            pfieldend = memchr(ptran+off, ';', nextparamoff-off);
++            nextfieldoff = (pfieldend == NULL) ? nextparamoff : pfieldend-ptran+1;
++
++            if (strncmp(ptran+off, "client_port=", 12) == 0)
++            {
++                u_int16_t   port;
++                uint        numlen;
++                uint        origoff;
++                uint        origlen;
++                char*       rbuf    = rbuf1;
++                uint        rbuflen = rbuf1len;
++
++                off += 12;
++                origoff = (ptran-ptcp)+off;
++                origlen = 0;
++                numlen = nf_strtou16(ptran+off, &port);
++                off += numlen;
++                origlen += numlen;
++                if (port != prtspexp->loport)
++                {
++                    DEBUGP("multiple ports found, port %hu ignored\n", port);
++                }
++                else
++                {
++                    if (ptran[off] == '-' || ptran[off] == '/')
++                    {
++                        off++;
++                        origlen++;
++                        numlen = nf_strtou16(ptran+off, &port);
++                        off += numlen;
++                        origlen += numlen;
++                        rbuf = rbufa;
++                        rbuflen = rbufalen;
++                    }
++
++                    /*
++                     * note we cannot just memcpy() if the sizes are the same.
++                     * the mangle function does skb resizing, checks for a
++                     * cloned skb, and updates the checksums.
++                     *
++                     * parameter 4 below is offset from start of tcp data.
++                     */
++                    diff = origlen-rbuflen;
++                    if (!nf_nat_mangle_tcp_packet(skb, ct, ctinfo,
++                                              origoff, origlen, rbuf, rbuflen))
++                    {
++                        /* mangle failed, all we can do is bail */
++			nf_ct_unexpect_related(exp);
++                        return 0;
++                    }
++                    get_skb_tcpdata(skb, &ptcp, &tcplen);
++                    ptran = ptcp+tranoff;
++                    tranlen -= diff;
++                    nextparamoff -= diff;
++                    nextfieldoff -= diff;
++                }
++            }
++
++            off = nextfieldoff;
++        }
++
++        off = nextparamoff;
++    }
++
++    return 1;
++}
++
++static uint
++help_out(struct sk_buff *skb, enum ip_conntrack_info ctinfo,
++	 unsigned int matchoff, unsigned int matchlen, struct ip_ct_rtsp_expect* prtspexp,
++	 struct nf_conntrack_expect* exp)
++{
++    char*   ptcp;
++    uint    tcplen;
++    uint    hdrsoff;
++    uint    hdrslen;
++    uint    lineoff;
++    uint    linelen;
++    uint    off;
++
++    //struct iphdr* iph = (struct iphdr*)skb->nh.iph;
++    //struct tcphdr* tcph = (struct tcphdr*)((void*)iph + iph->ihl*4);
++
++    get_skb_tcpdata(skb, &ptcp, &tcplen);
++    hdrsoff = matchoff;//exp->seq - ntohl(tcph->seq);
++    hdrslen = matchlen;
++    off = hdrsoff;
++    DEBUGP("NAT rtsp help_out\n");
++
++    while (nf_mime_nextline(ptcp, hdrsoff+hdrslen, &off, &lineoff, &linelen))
++    {
++        if (linelen == 0)
++        {
++            break;
++        }
++        if (off > hdrsoff+hdrslen)
++        {
++            INFOP("!! overrun !!");
++            break;
++        }
++        DEBUGP("hdr: len=%u, %.*s", linelen, (int)linelen, ptcp+lineoff);
++
++        if (nf_strncasecmp(ptcp+lineoff, "Transport:", 10) == 0)
++        {
++            uint oldtcplen = tcplen;
++	    DEBUGP("hdr: Transport\n");
++            if (!rtsp_mangle_tran(ctinfo, exp, prtspexp, skb, lineoff, linelen))
++            {
++		DEBUGP("hdr: Transport mangle failed");
++                break;
++            }
++            get_skb_tcpdata(skb, &ptcp, &tcplen);
++            hdrslen -= (oldtcplen-tcplen);
++            off -= (oldtcplen-tcplen);
++            lineoff -= (oldtcplen-tcplen);
++            linelen -= (oldtcplen-tcplen);
++            DEBUGP("rep: len=%u, %.*s", linelen, (int)linelen, ptcp+lineoff);
++        }
++    }
++
++    return NF_ACCEPT;
++}
++
++static unsigned int
++help(struct sk_buff *skb, enum ip_conntrack_info ctinfo,
++     unsigned int matchoff, unsigned int matchlen, struct ip_ct_rtsp_expect* prtspexp,
++     struct nf_conntrack_expect* exp)
++{
++    int dir = CTINFO2DIR(ctinfo);
++    int rc = NF_ACCEPT;
++
++    switch (dir)
++    {
++    case IP_CT_DIR_ORIGINAL:
++        rc = help_out(skb, ctinfo, matchoff, matchlen, prtspexp, exp);
++        break;
++    case IP_CT_DIR_REPLY:
++	DEBUGP("unmangle ! %u\n", ctinfo);
++    	/* XXX: unmangle */
++	rc = NF_ACCEPT;
++        break;
++    }
++    //UNLOCK_BH(&ip_rtsp_lock);
++
++    return rc;
++}
++
++static void expected(struct nf_conn* ct, struct nf_conntrack_expect *exp)
++{
++    struct nf_nat_multi_range_compat mr;
++    u_int32_t newdstip, newsrcip, newip;
++
++    struct nf_conn *master = ct->master;
++
++    newdstip = master->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
++    newsrcip = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
++    //FIXME (how to port that ?)
++    //code from 2.4 : newip = (HOOK2MANIP(hooknum) == IP_NAT_MANIP_SRC) ? newsrcip : newdstip;
++    newip = newdstip;
++
++    DEBUGP("newsrcip=%u.%u.%u.%u, newdstip=%u.%u.%u.%u, newip=%u.%u.%u.%u\n",
++           NIPQUAD(newsrcip), NIPQUAD(newdstip), NIPQUAD(newip));
++
++    mr.rangesize = 1;
++    // We don't want to manip the per-protocol, just the IPs.
++    mr.range[0].flags = IP_NAT_RANGE_MAP_IPS;
++    mr.range[0].min_ip = mr.range[0].max_ip = newip;
++
++    nf_nat_setup_info(ct, &mr.range[0], IP_NAT_MANIP_DST);
++}
++
++
++static void __exit fini(void)
++{
++	nf_nat_rtsp_hook = NULL;
++        nf_nat_rtsp_hook_expectfn = NULL;
++	synchronize_net();
++}
++
++static int __init init(void)
++{
++	printk("nf_nat_rtsp v" IP_NF_RTSP_VERSION " loading\n");
++
++	BUG_ON(nf_nat_rtsp_hook);
++	nf_nat_rtsp_hook = help;
++        nf_nat_rtsp_hook_expectfn = &expected;
++
++	if (stunaddr != NULL)
++		extip = in_aton(stunaddr);
++
++	if (destaction != NULL) {
++	        if (strcmp(destaction, "auto") == 0)
++			dstact = DSTACT_AUTO;
++
++		if (strcmp(destaction, "strip") == 0)
++			dstact = DSTACT_STRIP;
++
++		if (strcmp(destaction, "none") == 0)
++			dstact = DSTACT_NONE;
++	}
++
++	return 0;
++}
++
++module_init(init);
++module_exit(fini);
diff --git a/target/linux/generic/patches-2.6.30/200-sched_esfq.patch b/target/linux/generic/patches-2.6.30/200-sched_esfq.patch
new file mode 100644
index 0000000000..bf123ce780
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/200-sched_esfq.patch
@@ -0,0 +1,795 @@
+--- a/include/linux/pkt_sched.h
++++ b/include/linux/pkt_sched.h
+@@ -182,8 +182,37 @@ struct tc_sfq_xstats
+  *
+  *	The only reason for this is efficiency, it is possible
+  *	to change these parameters in compile time.
++ *
++ *	If you need to play with these values, use esfq instead.
+  */
+ 
++/* ESFQ section */
++
++enum
++{
++        /* traditional */
++	TCA_SFQ_HASH_CLASSIC,
++	TCA_SFQ_HASH_DST,
++	TCA_SFQ_HASH_SRC,
++	TCA_SFQ_HASH_FWMARK,
++	/* conntrack */
++	TCA_SFQ_HASH_CTORIGDST,
++	TCA_SFQ_HASH_CTORIGSRC,
++	TCA_SFQ_HASH_CTREPLDST,
++	TCA_SFQ_HASH_CTREPLSRC,
++	TCA_SFQ_HASH_CTNATCHG,
++};
++
++struct tc_esfq_qopt
++{
++	unsigned	quantum;	/* Bytes per round allocated to flow */
++	int		perturb_period;	/* Period of hash perturbation */
++	__u32		limit;		/* Maximal packets in queue */
++	unsigned	divisor;	/* Hash divisor  */
++	unsigned	flows;		/* Maximal number of flows  */
++	unsigned	hash_kind;	/* Hash function to use for flow identification */
++};
++
+ /* RED section */
+ 
+ enum
+--- a/net/sched/Kconfig
++++ b/net/sched/Kconfig
+@@ -137,6 +137,37 @@ config NET_SCH_SFQ
+ 	  To compile this code as a module, choose M here: the
+ 	  module will be called sch_sfq.
+ 
++config NET_SCH_ESFQ
++	tristate "Enhanced Stochastic Fairness Queueing (ESFQ)"
++	---help---
++	  Say Y here if you want to use the Enhanced Stochastic Fairness
++	  Queueing (ESFQ) packet scheduling algorithm for some of your network
++	  devices or as a leaf discipline for a classful qdisc such as HTB or
++	  CBQ (see the top of <file:net/sched/sch_esfq.c> for details and
++	  references to the SFQ algorithm).
++
++	  This is an enchanced SFQ version which allows you to control some
++	  hardcoded values in the SFQ scheduler.
++
++	  ESFQ also adds control of the hash function used to identify packet
++	  flows. The original SFQ discipline hashes by connection; ESFQ add
++	  several other hashing methods, such as by src IP or by dst IP, which
++	  can be more fair to users in some networking situations.
++
++	  To compile this code as a module, choose M here: the
++	  module will be called sch_esfq.
++
++config NET_SCH_ESFQ_NFCT
++	bool "Connection Tracking Hash Types"
++	depends on NET_SCH_ESFQ && NF_CONNTRACK
++	---help---
++	  Say Y here to enable support for hashing based on netfilter connection
++	  tracking information. This is useful for a router that is also using
++	  NAT to connect privately-addressed hosts to the Internet. If you want
++	  to provide fair distribution of upstream bandwidth, ESFQ must use
++	  connection tracking information, since all outgoing packets will share
++	  the same source address.
++
+ config NET_SCH_TEQL
+ 	tristate "True Link Equalizer (TEQL)"
+ 	---help---
+--- a/net/sched/Makefile
++++ b/net/sched/Makefile
+@@ -24,6 +24,7 @@ obj-$(CONFIG_NET_SCH_GRED)	+= sch_gred.o
+ obj-$(CONFIG_NET_SCH_INGRESS)	+= sch_ingress.o 
+ obj-$(CONFIG_NET_SCH_DSMARK)	+= sch_dsmark.o
+ obj-$(CONFIG_NET_SCH_SFQ)	+= sch_sfq.o
++obj-$(CONFIG_NET_SCH_ESFQ)	+= sch_esfq.o
+ obj-$(CONFIG_NET_SCH_TBF)	+= sch_tbf.o
+ obj-$(CONFIG_NET_SCH_TEQL)	+= sch_teql.o
+ obj-$(CONFIG_NET_SCH_PRIO)	+= sch_prio.o
+--- /dev/null
++++ b/net/sched/sch_esfq.c
+@@ -0,0 +1,702 @@
++/*
++ * net/sched/sch_esfq.c	Extended Stochastic Fairness Queueing discipline.
++ *
++ *		This program is free software; you can redistribute it and/or
++ *		modify it under the terms of the GNU General Public License
++ *		as published by the Free Software Foundation; either version
++ *		2 of the License, or (at your option) any later version.
++ *
++ * Authors:	Alexey Kuznetsov, <kuznet@ms2.inr.ac.ru>
++ *
++ * Changes:	Alexander Atanasov, <alex@ssi.bg>
++ *		Added dynamic depth,limit,divisor,hash_kind options.
++ *		Added dst and src hashes.
++ *
++ * 		Alexander Clouter, <alex@digriz.org.uk>
++ *		Ported ESFQ to Linux 2.6.
++ *
++ * 		Corey Hickey, <bugfood-c@fatooh.org>
++ *		Maintenance of the Linux 2.6 port.
++ *		Added fwmark hash (thanks to Robert Kurjata).
++ *		Added usage of jhash.
++ *		Added conntrack support.
++ *		Added ctnatchg hash (thanks to Ben Pfountz).
++ */
++
++#include <linux/module.h>
++#include <asm/uaccess.h>
++#include <asm/system.h>
++#include <linux/bitops.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/jiffies.h>
++#include <linux/string.h>
++#include <linux/mm.h>
++#include <linux/socket.h>
++#include <linux/sockios.h>
++#include <linux/in.h>
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/if_ether.h>
++#include <linux/inet.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/notifier.h>
++#include <linux/init.h>
++#include <net/ip.h>
++#include <net/netlink.h>
++#include <linux/ipv6.h>
++#include <net/route.h>
++#include <linux/skbuff.h>
++#include <net/sock.h>
++#include <net/pkt_sched.h>
++#include <linux/jhash.h>
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++#include <net/netfilter/nf_conntrack.h>
++#endif
++
++/*	Stochastic Fairness Queuing algorithm.
++	For more comments look at sch_sfq.c.
++	The difference is that you can change limit, depth,
++	hash table size and choose alternate hash types.
++
++	classic:	same as in sch_sfq.c
++	dst:		destination IP address
++	src:		source IP address
++	fwmark:		netfilter mark value
++	ctorigdst:	original destination IP address
++	ctorigsrc:	original source IP address
++	ctrepldst:	reply destination IP address
++	ctreplsrc:	reply source IP
++
++*/
++
++#define ESFQ_HEAD 0
++#define ESFQ_TAIL 1
++
++/* This type should contain at least SFQ_DEPTH*2 values */
++typedef unsigned int esfq_index;
++
++struct esfq_head
++{
++	esfq_index	next;
++	esfq_index	prev;
++};
++
++struct esfq_sched_data
++{
++/* Parameters */
++	int		perturb_period;
++	unsigned	quantum;	/* Allotment per round: MUST BE >= MTU */
++	int		limit;
++	unsigned	depth;
++	unsigned	hash_divisor;
++	unsigned	hash_kind;
++/* Variables */
++	struct timer_list perturb_timer;
++	int		perturbation;
++	esfq_index	tail;		/* Index of current slot in round */
++	esfq_index	max_depth;	/* Maximal depth */
++
++	esfq_index	*ht;			/* Hash table */
++	esfq_index	*next;			/* Active slots link */
++	short		*allot;			/* Current allotment per slot */
++	unsigned short	*hash;			/* Hash value indexed by slots */
++	struct sk_buff_head	*qs;		/* Slot queue */
++	struct esfq_head	*dep;		/* Linked list of slots, indexed by depth */
++};
++
++/* This contains the info we will hash. */
++struct esfq_packet_info
++{
++	u32	proto;		/* protocol or port */
++	u32	src;		/* source from packet header */
++	u32	dst;		/* destination from packet header */
++	u32	ctorigsrc;	/* original source from conntrack */
++	u32	ctorigdst;	/* original destination from conntrack */
++	u32	ctreplsrc;	/* reply source from conntrack */
++	u32	ctrepldst;	/* reply destination from conntrack */
++	u32	mark;		/* netfilter mark (fwmark) */
++};
++
++static __inline__ unsigned esfq_jhash_1word(struct esfq_sched_data *q,u32 a)
++{
++	return jhash_1word(a, q->perturbation) & (q->hash_divisor-1);
++}
++
++static __inline__ unsigned esfq_jhash_2words(struct esfq_sched_data *q, u32 a, u32 b)
++{
++	return jhash_2words(a, b, q->perturbation) & (q->hash_divisor-1);
++}
++
++static __inline__ unsigned esfq_jhash_3words(struct esfq_sched_data *q, u32 a, u32 b, u32 c)
++{
++	return jhash_3words(a, b, c, q->perturbation) & (q->hash_divisor-1);
++}
++
++static unsigned esfq_hash(struct esfq_sched_data *q, struct sk_buff *skb)
++{
++	struct esfq_packet_info info;
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++	enum ip_conntrack_info ctinfo;
++	struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
++#endif
++
++	switch (skb->protocol) {
++	case __constant_htons(ETH_P_IP):
++	{
++		struct iphdr *iph = ip_hdr(skb);
++		info.dst = iph->daddr;
++		info.src = iph->saddr;
++		if (!(iph->frag_off&htons(IP_MF|IP_OFFSET)) &&
++		    (iph->protocol == IPPROTO_TCP ||
++		     iph->protocol == IPPROTO_UDP ||
++		     iph->protocol == IPPROTO_SCTP ||
++		     iph->protocol == IPPROTO_DCCP ||
++		     iph->protocol == IPPROTO_ESP))
++			info.proto = *(((u32*)iph) + iph->ihl);
++		else
++			info.proto = iph->protocol;
++		break;
++	}
++	case __constant_htons(ETH_P_IPV6):
++	{
++		struct ipv6hdr *iph = ipv6_hdr(skb);
++		/* Hash ipv6 addresses into a u32. This isn't ideal,
++		 * but the code is simple. */
++		info.dst = jhash2(iph->daddr.s6_addr32, 4, q->perturbation);
++		info.src = jhash2(iph->saddr.s6_addr32, 4, q->perturbation);
++		if (iph->nexthdr == IPPROTO_TCP ||
++		    iph->nexthdr == IPPROTO_UDP ||
++		    iph->nexthdr == IPPROTO_SCTP ||
++		    iph->nexthdr == IPPROTO_DCCP ||
++		    iph->nexthdr == IPPROTO_ESP)
++			info.proto = *(u32*)&iph[1];
++		else
++			info.proto = iph->nexthdr;
++		break;
++	}
++	default:
++		info.dst   = (u32)(unsigned long)skb->dst;
++		info.src   = (u32)(unsigned long)skb->sk;
++		info.proto = skb->protocol;
++	}
++
++	info.mark = skb->mark;
++
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++	/* defaults if there is no conntrack info */
++	info.ctorigsrc = info.src;
++	info.ctorigdst = info.dst;
++	info.ctreplsrc = info.dst;
++	info.ctrepldst = info.src;
++	/* collect conntrack info */
++	if (ct && ct != &nf_conntrack_untracked) {
++		if (skb->protocol == __constant_htons(ETH_P_IP)) {
++			info.ctorigsrc = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
++			info.ctorigdst = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3.ip;
++			info.ctreplsrc = ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3.ip;
++			info.ctrepldst = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip;
++		}
++		else if (skb->protocol == __constant_htons(ETH_P_IPV6)) {
++			/* Again, hash ipv6 addresses into a single u32. */
++			info.ctorigsrc = jhash2(ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip6, 4, q->perturbation);
++			info.ctorigdst = jhash2(ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3.ip6, 4, q->perturbation);
++			info.ctreplsrc = jhash2(ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3.ip6, 4, q->perturbation);
++			info.ctrepldst = jhash2(ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip6, 4, q->perturbation);
++		}
++
++	}
++#endif
++
++	switch(q->hash_kind) {
++	case TCA_SFQ_HASH_CLASSIC:
++		return esfq_jhash_3words(q, info.dst, info.src, info.proto);
++	case TCA_SFQ_HASH_DST:
++		return esfq_jhash_1word(q, info.dst);
++	case TCA_SFQ_HASH_SRC:
++		return esfq_jhash_1word(q, info.src);
++	case TCA_SFQ_HASH_FWMARK:
++		return esfq_jhash_1word(q, info.mark);
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++	case TCA_SFQ_HASH_CTORIGDST:
++		return esfq_jhash_1word(q, info.ctorigdst);
++	case TCA_SFQ_HASH_CTORIGSRC:
++		return esfq_jhash_1word(q, info.ctorigsrc);
++	case TCA_SFQ_HASH_CTREPLDST:
++		return esfq_jhash_1word(q, info.ctrepldst);
++	case TCA_SFQ_HASH_CTREPLSRC:
++		return esfq_jhash_1word(q, info.ctreplsrc);
++	case TCA_SFQ_HASH_CTNATCHG:
++	{
++		if (info.ctorigdst == info.ctreplsrc)
++			return esfq_jhash_1word(q, info.ctorigsrc);
++		return esfq_jhash_1word(q, info.ctreplsrc);
++	}
++#endif
++	default:
++		if (net_ratelimit())
++			printk(KERN_WARNING "ESFQ: Unknown hash method. Falling back to classic.\n");
++	}
++	return esfq_jhash_3words(q, info.dst, info.src, info.proto);
++}
++
++static inline void esfq_link(struct esfq_sched_data *q, esfq_index x)
++{
++	esfq_index p, n;
++	int d = q->qs[x].qlen + q->depth;
++
++	p = d;
++	n = q->dep[d].next;
++	q->dep[x].next = n;
++	q->dep[x].prev = p;
++	q->dep[p].next = q->dep[n].prev = x;
++}
++
++static inline void esfq_dec(struct esfq_sched_data *q, esfq_index x)
++{
++	esfq_index p, n;
++
++	n = q->dep[x].next;
++	p = q->dep[x].prev;
++	q->dep[p].next = n;
++	q->dep[n].prev = p;
++
++	if (n == p && q->max_depth == q->qs[x].qlen + 1)
++		q->max_depth--;
++
++	esfq_link(q, x);
++}
++
++static inline void esfq_inc(struct esfq_sched_data *q, esfq_index x)
++{
++	esfq_index p, n;
++	int d;
++
++	n = q->dep[x].next;
++	p = q->dep[x].prev;
++	q->dep[p].next = n;
++	q->dep[n].prev = p;
++	d = q->qs[x].qlen;
++	if (q->max_depth < d)
++		q->max_depth = d;
++
++	esfq_link(q, x);
++}
++
++static unsigned int esfq_drop(struct Qdisc *sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_index d = q->max_depth;
++	struct sk_buff *skb;
++	unsigned int len;
++
++	/* Queue is full! Find the longest slot and
++	   drop a packet from it */
++
++	if (d > 1) {
++		esfq_index x = q->dep[d+q->depth].next;
++		skb = q->qs[x].prev;
++		len = skb->len;
++		__skb_unlink(skb, &q->qs[x]);
++		kfree_skb(skb);
++		esfq_dec(q, x);
++		sch->q.qlen--;
++		sch->qstats.drops++;
++		sch->qstats.backlog -= len;
++		return len;
++	}
++
++	if (d == 1) {
++		/* It is difficult to believe, but ALL THE SLOTS HAVE LENGTH 1. */
++		d = q->next[q->tail];
++		q->next[q->tail] = q->next[d];
++		q->allot[q->next[d]] += q->quantum;
++		skb = q->qs[d].prev;
++		len = skb->len;
++		__skb_unlink(skb, &q->qs[d]);
++		kfree_skb(skb);
++		esfq_dec(q, d);
++		sch->q.qlen--;
++		q->ht[q->hash[d]] = q->depth;
++		sch->qstats.drops++;
++		sch->qstats.backlog -= len;
++		return len;
++	}
++
++	return 0;
++}
++
++static void esfq_q_enqueue(struct sk_buff *skb, struct esfq_sched_data *q, unsigned int end)
++{
++	unsigned hash = esfq_hash(q, skb);
++	unsigned depth = q->depth;
++	esfq_index x;
++
++	x = q->ht[hash];
++	if (x == depth) {
++		q->ht[hash] = x = q->dep[depth].next;
++		q->hash[x] = hash;
++	}
++
++	if (end == ESFQ_TAIL)
++		__skb_queue_tail(&q->qs[x], skb);
++	else
++		__skb_queue_head(&q->qs[x], skb);
++
++	esfq_inc(q, x);
++	if (q->qs[x].qlen == 1) {		/* The flow is new */
++		if (q->tail == depth) {	/* It is the first flow */
++			q->tail = x;
++			q->next[x] = x;
++			q->allot[x] = q->quantum;
++		} else {
++			q->next[x] = q->next[q->tail];
++			q->next[q->tail] = x;
++			q->tail = x;
++		}
++	}
++}
++
++static int esfq_enqueue(struct sk_buff *skb, struct Qdisc* sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_q_enqueue(skb, q, ESFQ_TAIL);
++	sch->qstats.backlog += skb->len;
++	if (++sch->q.qlen < q->limit-1) {
++		sch->bstats.bytes += skb->len;
++		sch->bstats.packets++;
++		return 0;
++	}
++
++	sch->qstats.drops++;
++	esfq_drop(sch);
++	return NET_XMIT_CN;
++}
++
++static struct sk_buff *esfq_peek(struct Qdisc* sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_index a;
++
++	/* No active slots */
++	if (q->tail == q->depth)
++		return NULL;
++
++	a = q->next[q->tail];
++	return skb_peek(&q->qs[a]);
++}
++
++static struct sk_buff *esfq_q_dequeue(struct esfq_sched_data *q)
++{
++	struct sk_buff *skb;
++	unsigned depth = q->depth;
++	esfq_index a, old_a;
++
++	/* No active slots */
++	if (q->tail == depth)
++		return NULL;
++
++	a = old_a = q->next[q->tail];
++
++	/* Grab packet */
++	skb = __skb_dequeue(&q->qs[a]);
++	esfq_dec(q, a);
++
++	/* Is the slot empty? */
++	if (q->qs[a].qlen == 0) {
++		q->ht[q->hash[a]] = depth;
++		a = q->next[a];
++		if (a == old_a) {
++			q->tail = depth;
++			return skb;
++		}
++		q->next[q->tail] = a;
++		q->allot[a] += q->quantum;
++	} else if ((q->allot[a] -= skb->len) <= 0) {
++		q->tail = a;
++		a = q->next[a];
++		q->allot[a] += q->quantum;
++	}
++
++	return skb;
++}
++
++static struct sk_buff *esfq_dequeue(struct Qdisc* sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	struct sk_buff *skb;
++
++	skb = esfq_q_dequeue(q);
++	if (skb == NULL)
++		return NULL;
++	sch->q.qlen--;
++	sch->qstats.backlog -= skb->len;
++	return skb;
++}
++
++static void esfq_q_destroy(struct esfq_sched_data *q)
++{
++	del_timer(&q->perturb_timer);
++	if(q->ht)
++		kfree(q->ht);
++	if(q->dep)
++		kfree(q->dep);
++	if(q->next)
++		kfree(q->next);
++	if(q->allot)
++		kfree(q->allot);
++	if(q->hash)
++		kfree(q->hash);
++	if(q->qs)
++		kfree(q->qs);
++}
++
++static void esfq_destroy(struct Qdisc *sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_q_destroy(q);
++}
++
++
++static void esfq_reset(struct Qdisc* sch)
++{
++	struct sk_buff *skb;
++
++	while ((skb = esfq_dequeue(sch)) != NULL)
++		kfree_skb(skb);
++}
++
++static void esfq_perturbation(unsigned long arg)
++{
++	struct Qdisc *sch = (struct Qdisc*)arg;
++	struct esfq_sched_data *q = qdisc_priv(sch);
++
++	q->perturbation = net_random()&0x1F;
++
++	if (q->perturb_period) {
++		q->perturb_timer.expires = jiffies + q->perturb_period;
++		add_timer(&q->perturb_timer);
++	}
++}
++
++static unsigned int esfq_check_hash(unsigned int kind)
++{
++	switch (kind) {
++	case TCA_SFQ_HASH_CTORIGDST:
++	case TCA_SFQ_HASH_CTORIGSRC:
++	case TCA_SFQ_HASH_CTREPLDST:
++	case TCA_SFQ_HASH_CTREPLSRC:
++	case TCA_SFQ_HASH_CTNATCHG:
++#ifndef CONFIG_NET_SCH_ESFQ_NFCT
++	{
++		if (net_ratelimit())
++			printk(KERN_WARNING "ESFQ: Conntrack hash types disabled in kernel config. Falling back to classic.\n");
++		return TCA_SFQ_HASH_CLASSIC;
++	}
++#endif
++	case TCA_SFQ_HASH_CLASSIC:
++	case TCA_SFQ_HASH_DST:
++	case TCA_SFQ_HASH_SRC:
++	case TCA_SFQ_HASH_FWMARK:
++		return kind;
++	default:
++	{
++		if (net_ratelimit())
++			printk(KERN_WARNING "ESFQ: Unknown hash type. Falling back to classic.\n");
++		return TCA_SFQ_HASH_CLASSIC;
++	}
++	}
++}
++
++static int esfq_q_init(struct esfq_sched_data *q, struct nlattr *opt)
++{
++	struct tc_esfq_qopt *ctl = nla_data(opt);
++	esfq_index p = ~0U/2;
++	int i;
++
++	if (opt && opt->nla_len < nla_attr_size(sizeof(*ctl)))
++		return -EINVAL;
++
++	q->perturbation = 0;
++	q->hash_kind = TCA_SFQ_HASH_CLASSIC;
++	q->max_depth = 0;
++	if (opt == NULL) {
++		q->perturb_period = 0;
++		q->hash_divisor = 1024;
++		q->tail = q->limit = q->depth = 128;
++
++	} else {
++		struct tc_esfq_qopt *ctl = nla_data(opt);
++		if (ctl->quantum)
++			q->quantum = ctl->quantum;
++		q->perturb_period = ctl->perturb_period*HZ;
++		q->hash_divisor = ctl->divisor ? : 1024;
++		q->tail = q->limit = q->depth = ctl->flows ? : 128;
++
++		if ( q->depth > p - 1 )
++			return -EINVAL;
++
++		if (ctl->limit)
++			q->limit = min_t(u32, ctl->limit, q->depth);
++
++		if (ctl->hash_kind) {
++			q->hash_kind = esfq_check_hash(ctl->hash_kind);
++		}
++	}
++
++	q->ht = kmalloc(q->hash_divisor*sizeof(esfq_index), GFP_KERNEL);
++	if (!q->ht)
++		goto err_case;
++	q->dep = kmalloc((1+q->depth*2)*sizeof(struct esfq_head), GFP_KERNEL);
++	if (!q->dep)
++		goto err_case;
++	q->next = kmalloc(q->depth*sizeof(esfq_index), GFP_KERNEL);
++	if (!q->next)
++		goto err_case;
++	q->allot = kmalloc(q->depth*sizeof(short), GFP_KERNEL);
++	if (!q->allot)
++		goto err_case;
++	q->hash = kmalloc(q->depth*sizeof(unsigned short), GFP_KERNEL);
++	if (!q->hash)
++		goto err_case;
++	q->qs = kmalloc(q->depth*sizeof(struct sk_buff_head), GFP_KERNEL);
++	if (!q->qs)
++		goto err_case;
++
++	for (i=0; i< q->hash_divisor; i++)
++		q->ht[i] = q->depth;
++	for (i=0; i<q->depth; i++) {
++		skb_queue_head_init(&q->qs[i]);
++		q->dep[i+q->depth].next = i+q->depth;
++		q->dep[i+q->depth].prev = i+q->depth;
++	}
++
++	for (i=0; i<q->depth; i++)
++		esfq_link(q, i);
++	return 0;
++err_case:
++	esfq_q_destroy(q);
++	return -ENOBUFS;
++}
++
++static int esfq_init(struct Qdisc *sch, struct nlattr *opt)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	int err;
++
++	q->quantum = psched_mtu(qdisc_dev(sch)); /* default */
++	if ((err = esfq_q_init(q, opt)))
++		return err;
++
++	init_timer(&q->perturb_timer);
++	q->perturb_timer.data = (unsigned long)sch;
++	q->perturb_timer.function = esfq_perturbation;
++	if (q->perturb_period) {
++		q->perturb_timer.expires = jiffies + q->perturb_period;
++		add_timer(&q->perturb_timer);
++	}
++
++	return 0;
++}
++
++static int esfq_change(struct Qdisc *sch, struct nlattr *opt)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	struct esfq_sched_data new;
++	struct sk_buff *skb;
++	int err;
++
++	/* set up new queue */
++	memset(&new, 0, sizeof(struct esfq_sched_data));
++	new.quantum = psched_mtu(qdisc_dev(sch)); /* default */
++	if ((err = esfq_q_init(&new, opt)))
++		return err;
++
++	/* copy all packets from the old queue to the new queue */
++	sch_tree_lock(sch);
++	while ((skb = esfq_q_dequeue(q)) != NULL)
++		esfq_q_enqueue(skb, &new, ESFQ_TAIL);
++
++	/* clean up the old queue */
++	esfq_q_destroy(q);
++
++	/* copy elements of the new queue into the old queue */
++	q->perturb_period = new.perturb_period;
++	q->quantum        = new.quantum;
++	q->limit          = new.limit;
++	q->depth          = new.depth;
++	q->hash_divisor   = new.hash_divisor;
++	q->hash_kind      = new.hash_kind;
++	q->tail           = new.tail;
++	q->max_depth      = new.max_depth;
++	q->ht    = new.ht;
++	q->dep   = new.dep;
++	q->next  = new.next;
++	q->allot = new.allot;
++	q->hash  = new.hash;
++	q->qs    = new.qs;
++
++	/* finish up */
++	if (q->perturb_period) {
++		q->perturb_timer.expires = jiffies + q->perturb_period;
++		add_timer(&q->perturb_timer);
++	} else {
++		q->perturbation = 0;
++	}
++	sch_tree_unlock(sch);
++	return 0;
++}
++
++static int esfq_dump(struct Qdisc *sch, struct sk_buff *skb)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	unsigned char *b = skb_tail_pointer(skb);
++	struct tc_esfq_qopt opt;
++
++	opt.quantum = q->quantum;
++	opt.perturb_period = q->perturb_period/HZ;
++
++	opt.limit = q->limit;
++	opt.divisor = q->hash_divisor;
++	opt.flows = q->depth;
++	opt.hash_kind = q->hash_kind;
++
++	NLA_PUT(skb, TCA_OPTIONS, sizeof(opt), &opt);
++
++	return skb->len;
++
++nla_put_failure:
++	nlmsg_trim(skb, b);
++	return -1;
++}
++
++static struct Qdisc_ops esfq_qdisc_ops =
++{
++	.next		=	NULL,
++	.cl_ops		=	NULL,
++	.id		=	"esfq",
++	.priv_size	=	sizeof(struct esfq_sched_data),
++	.enqueue	=	esfq_enqueue,
++	.dequeue	=	esfq_dequeue,
++	.peek		=	esfq_peek,
++	.drop		=	esfq_drop,
++	.init		=	esfq_init,
++	.reset		=	esfq_reset,
++	.destroy	=	esfq_destroy,
++	.change		=	esfq_change,
++	.dump		=	esfq_dump,
++	.owner		=	THIS_MODULE,
++};
++
++static int __init esfq_module_init(void)
++{
++	return register_qdisc(&esfq_qdisc_ops);
++}
++static void __exit esfq_module_exit(void)
++{
++	unregister_qdisc(&esfq_qdisc_ops);
++}
++module_init(esfq_module_init)
++module_exit(esfq_module_exit)
++MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/patches-2.6.30/201-jhash3.patch b/target/linux/generic/patches-2.6.30/201-jhash3.patch
new file mode 100644
index 0000000000..0218fa19c5
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/201-jhash3.patch
@@ -0,0 +1,227 @@
+--- a/include/linux/jhash.h
++++ b/include/linux/jhash.h
+@@ -3,80 +3,95 @@
+ 
+ /* jhash.h: Jenkins hash support.
+  *
+- * Copyright (C) 1996 Bob Jenkins (bob_jenkins@burtleburtle.net)
++ * Copyright (C) 2006. Bob Jenkins (bob_jenkins@burtleburtle.net)
+  *
+  * http://burtleburtle.net/bob/hash/
+  *
+  * These are the credits from Bob's sources:
+  *
+- * lookup2.c, by Bob Jenkins, December 1996, Public Domain.
+- * hash(), hash2(), hash3, and mix() are externally useful functions.
+- * Routines to test the hash are included if SELF_TEST is defined.
+- * You can use this free for any purpose.  It has no warranty.
++ * lookup3.c, by Bob Jenkins, May 2006, Public Domain.
+  *
+- * Copyright (C) 2003 David S. Miller (davem@redhat.com)
++ * These are functions for producing 32-bit hashes for hash table lookup.
++ * hashword(), hashlittle(), hashlittle2(), hashbig(), mix(), and final() 
++ * are externally useful functions.  Routines to test the hash are included 
++ * if SELF_TEST is defined.  You can use this free for any purpose.  It's in
++ * the public domain.  It has no warranty.
++ *
++ * Copyright (C) 2009 Jozsef Kadlecsik (kadlec@blackhole.kfki.hu)
+  *
+  * I've modified Bob's hash to be useful in the Linux kernel, and
+- * any bugs present are surely my fault.  -DaveM
++ * any bugs present are my fault.  Jozsef
+  */
+ 
+-/* NOTE: Arguments are modified. */
+-#define __jhash_mix(a, b, c) \
++#define __rot(x,k) (((x)<<(k)) | ((x)>>(32-(k))))
++
++/* __jhash_mix - mix 3 32-bit values reversibly. */
++#define __jhash_mix(a,b,c) \
++{ \
++  a -= c;  a ^= __rot(c, 4);  c += b; \
++  b -= a;  b ^= __rot(a, 6);  a += c; \
++  c -= b;  c ^= __rot(b, 8);  b += a; \
++  a -= c;  a ^= __rot(c,16);  c += b; \
++  b -= a;  b ^= __rot(a,19);  a += c; \
++  c -= b;  c ^= __rot(b, 4);  b += a; \
++}
++
++/* __jhash_final - final mixing of 3 32-bit values (a,b,c) into c */
++#define __jhash_final(a,b,c) \
+ { \
+-  a -= b; a -= c; a ^= (c>>13); \
+-  b -= c; b -= a; b ^= (a<<8); \
+-  c -= a; c -= b; c ^= (b>>13); \
+-  a -= b; a -= c; a ^= (c>>12);  \
+-  b -= c; b -= a; b ^= (a<<16); \
+-  c -= a; c -= b; c ^= (b>>5); \
+-  a -= b; a -= c; a ^= (c>>3);  \
+-  b -= c; b -= a; b ^= (a<<10); \
+-  c -= a; c -= b; c ^= (b>>15); \
++  c ^= b; c -= __rot(b,14); \
++  a ^= c; a -= __rot(c,11); \
++  b ^= a; b -= __rot(a,25); \
++  c ^= b; c -= __rot(b,16); \
++  a ^= c; a -= __rot(c,4);  \
++  b ^= a; b -= __rot(a,14); \
++  c ^= b; c -= __rot(b,24); \
+ }
+ 
+-/* The golden ration: an arbitrary value */
+-#define JHASH_GOLDEN_RATIO	0x9e3779b9
++/* An arbitrary initial parameter */
++#define JHASH_GOLDEN_RATIO	0xdeadbeef
+ 
+ /* The most generic version, hashes an arbitrary sequence
+  * of bytes.  No alignment or length assumptions are made about
+- * the input key.
++ * the input key. The result depends on endianness.
+  */
+ static inline u32 jhash(const void *key, u32 length, u32 initval)
+ {
+-	u32 a, b, c, len;
++	u32 a,b,c;
+ 	const u8 *k = key;
+ 
+-	len = length;
+-	a = b = JHASH_GOLDEN_RATIO;
+-	c = initval;
+-
+-	while (len >= 12) {
+-		a += (k[0] +((u32)k[1]<<8) +((u32)k[2]<<16) +((u32)k[3]<<24));
+-		b += (k[4] +((u32)k[5]<<8) +((u32)k[6]<<16) +((u32)k[7]<<24));
+-		c += (k[8] +((u32)k[9]<<8) +((u32)k[10]<<16)+((u32)k[11]<<24));
+-
+-		__jhash_mix(a,b,c);
++	/* Set up the internal state */
++	a = b = c = JHASH_GOLDEN_RATIO + length + initval;
+ 
++	/* all but the last block: affect some 32 bits of (a,b,c) */
++	while (length > 12) {
++    		a += (k[0] + ((u32)k[1]<<8) + ((u32)k[2]<<16) + ((u32)k[3]<<24));
++		b += (k[4] + ((u32)k[5]<<8) + ((u32)k[6]<<16) + ((u32)k[7]<<24));
++		c += (k[8] + ((u32)k[9]<<8) + ((u32)k[10]<<16) + ((u32)k[11]<<24));
++		__jhash_mix(a, b, c);
++		length -= 12;
+ 		k += 12;
+-		len -= 12;
+ 	}
+ 
+-	c += length;
+-	switch (len) {
+-	case 11: c += ((u32)k[10]<<24);
+-	case 10: c += ((u32)k[9]<<16);
+-	case 9 : c += ((u32)k[8]<<8);
+-	case 8 : b += ((u32)k[7]<<24);
+-	case 7 : b += ((u32)k[6]<<16);
+-	case 6 : b += ((u32)k[5]<<8);
++	/* last block: affect all 32 bits of (c) */
++	/* all the case statements fall through */
++	switch (length) {
++	case 12: c += (u32)k[11]<<24;
++	case 11: c += (u32)k[10]<<16;
++	case 10: c += (u32)k[9]<<8;
++	case 9 : c += k[8];
++	case 8 : b += (u32)k[7]<<24;
++	case 7 : b += (u32)k[6]<<16;
++	case 6 : b += (u32)k[5]<<8;
+ 	case 5 : b += k[4];
+-	case 4 : a += ((u32)k[3]<<24);
+-	case 3 : a += ((u32)k[2]<<16);
+-	case 2 : a += ((u32)k[1]<<8);
++	case 4 : a += (u32)k[3]<<24;
++	case 3 : a += (u32)k[2]<<16;
++	case 2 : a += (u32)k[1]<<8;
+ 	case 1 : a += k[0];
+-	};
+-
+-	__jhash_mix(a,b,c);
++		__jhash_final(a, b, c);
++	case 0 :
++		break;
++	}
+ 
+ 	return c;
+ }
+@@ -86,58 +101,57 @@ static inline u32 jhash(const void *key,
+  */
+ static inline u32 jhash2(const u32 *k, u32 length, u32 initval)
+ {
+-	u32 a, b, c, len;
++	u32 a, b, c;
+ 
+-	a = b = JHASH_GOLDEN_RATIO;
+-	c = initval;
+-	len = length;
++	/* Set up the internal state */
++	a = b = c = JHASH_GOLDEN_RATIO + (length<<2) + initval;
+ 
+-	while (len >= 3) {
++	/* handle most of the key */
++	while (length > 3) {
+ 		a += k[0];
+ 		b += k[1];
+ 		c += k[2];
+ 		__jhash_mix(a, b, c);
+-		k += 3; len -= 3;
++		length -= 3;
++		k += 3;
+ 	}
+ 
+-	c += length * 4;
+-
+-	switch (len) {
+-	case 2 : b += k[1];
+-	case 1 : a += k[0];
+-	};
+-
+-	__jhash_mix(a,b,c);
++	/* handle the last 3 u32's */
++	/* all the case statements fall through */ 
++	switch (length) {
++	case 3: c += k[2];
++	case 2: b += k[1];
++	case 1: a += k[0];
++		__jhash_final(a, b, c);
++	case 0:     /* case 0: nothing left to add */
++		break;
++	}
+ 
+ 	return c;
+ }
+ 
+-
+ /* A special ultra-optimized versions that knows they are hashing exactly
+  * 3, 2 or 1 word(s).
+- *
+- * NOTE: In partilar the "c += length; __jhash_mix(a,b,c);" normally
+- *       done at the end is not done here.
+  */
+ static inline u32 jhash_3words(u32 a, u32 b, u32 c, u32 initval)
+ {
+-	a += JHASH_GOLDEN_RATIO;
+-	b += JHASH_GOLDEN_RATIO;
+-	c += initval;
++	a += JHASH_GOLDEN_RATIO + initval;
++	b += JHASH_GOLDEN_RATIO + initval;
++	c += JHASH_GOLDEN_RATIO + initval;
+ 
+-	__jhash_mix(a, b, c);
++	__jhash_final(a, b, c);
+ 
+ 	return c;
+ }
+ 
+ static inline u32 jhash_2words(u32 a, u32 b, u32 initval)
+ {
+-	return jhash_3words(a, b, 0, initval);
++	return jhash_3words(0, a, b, initval);
+ }
+ 
+ static inline u32 jhash_1word(u32 a, u32 initval)
+ {
+-	return jhash_3words(a, 0, 0, initval);
++	return jhash_3words(0, 0, a, initval);
+ }
+ 
+ #endif /* _LINUX_JHASH_H */
diff --git a/target/linux/generic/patches-2.6.30/202-mips_mem_functions_performance.patch b/target/linux/generic/patches-2.6.30/202-mips_mem_functions_performance.patch
new file mode 100644
index 0000000000..6ea9ba51ee
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/202-mips_mem_functions_performance.patch
@@ -0,0 +1,83 @@
+--- a/arch/mips/include/asm/string.h
++++ b/arch/mips/include/asm/string.h
+@@ -133,11 +133,44 @@ strncmp(__const__ char *__cs, __const__ 
+ 
+ #define __HAVE_ARCH_MEMSET
+ extern void *memset(void *__s, int __c, size_t __count);
++#define memset(__s, __c, len)					\
++({								\
++	size_t __len = (len);					\
++	void *__ret;						\
++	if (__builtin_constant_p(len) && __len >= 64)		\
++		__ret = memset((__s), (__c), __len);		\
++	else							\
++		__ret = __builtin_memset((__s), (__c), __len);	\
++	__ret;							\
++})
+ 
+ #define __HAVE_ARCH_MEMCPY
+ extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
++#define memcpy(dst, src, len)					\
++({								\
++	size_t __len = (len);					\
++	void *__ret;						\
++	if (__builtin_constant_p(len) && __len >= 64)		\
++		__ret = memcpy((dst), (src), __len);		\
++	else							\
++		__ret = __builtin_memcpy((dst), (src), __len);	\
++	__ret;							\
++})
+ 
+ #define __HAVE_ARCH_MEMMOVE
+ extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
++#define memmove(dst, src, len)					\
++({								\
++	size_t __len = (len);					\
++	void *__ret;						\
++	if (__builtin_constant_p(len) && __len >= 64)		\
++		__ret = memmove((dst), (src), __len);		\
++	else							\
++		__ret = __builtin_memmove((dst), (src), __len);	\
++	__ret;							\
++})
++
++#define __HAVE_ARCH_MEMCMP
++#define memcmp(src1, src2, len) __builtin_memcmp((src1), (src2), (len))
+ 
+ #endif /* _ASM_STRING_H */
+--- a/arch/mips/lib/Makefile
++++ b/arch/mips/lib/Makefile
+@@ -3,7 +3,7 @@
+ #
+ 
+ lib-y	+= csum_partial.o delay.o memcpy.o memcpy-inatomic.o memset.o \
+-	   strlen_user.o strncpy_user.o strnlen_user.o uncached.o
++	   strlen_user.o strncpy_user.o strnlen_user.o uncached.o memcmp.o
+ 
+ obj-y			+= iomap.o
+ obj-$(CONFIG_PCI)	+= iomap-pci.o
+--- /dev/null
++++ b/arch/mips/lib/memcmp.c
+@@ -0,0 +1,22 @@
++/*
++ *  copied from linux/lib/string.c
++ *
++ *  Copyright (C) 1991, 1992  Linus Torvalds
++ */
++
++#include <linux/module.h>
++#include <linux/string.h>
++
++#undef memcmp
++int memcmp(const void *cs, const void *ct, size_t count)
++{
++	const unsigned char *su1, *su2;
++	int res = 0;
++
++	for (su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--)
++		if ((res = *su1 - *su2) != 0)
++			break;
++	return res;
++}
++EXPORT_SYMBOL(memcmp);
++
diff --git a/target/linux/generic/patches-2.6.30/203-slab_maxsize.patch b/target/linux/generic/patches-2.6.30/203-slab_maxsize.patch
new file mode 100644
index 0000000000..25567f8488
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/203-slab_maxsize.patch
@@ -0,0 +1,13 @@
+--- a/include/linux/slab.h
++++ b/include/linux/slab.h
+@@ -115,8 +115,8 @@ int kmem_ptr_validate(struct kmem_cache 
+  * to do various tricks to work around compiler limitations in order to
+  * ensure proper constant folding.
+  */
+-#define KMALLOC_SHIFT_HIGH	((MAX_ORDER + PAGE_SHIFT - 1) <= 25 ? \
+-				(MAX_ORDER + PAGE_SHIFT - 1) : 25)
++#define KMALLOC_SHIFT_HIGH	((MAX_ORDER + PAGE_SHIFT - 1) <= 17 ? \
++				(MAX_ORDER + PAGE_SHIFT - 1) : 17)
+ 
+ #define KMALLOC_MAX_SIZE	(1UL << KMALLOC_SHIFT_HIGH)
+ #define KMALLOC_MAX_ORDER	(KMALLOC_SHIFT_HIGH - PAGE_SHIFT)
diff --git a/target/linux/generic/patches-2.6.30/204-jffs2_eofdetect.patch b/target/linux/generic/patches-2.6.30/204-jffs2_eofdetect.patch
new file mode 100644
index 0000000000..16d3e1f8e8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/204-jffs2_eofdetect.patch
@@ -0,0 +1,132 @@
+--- a/fs/jffs2/build.c
++++ b/fs/jffs2/build.c
+@@ -111,6 +111,17 @@ static int jffs2_build_filesystem(struct
+ 	dbg_fsbuild("scanned flash completely\n");
+ 	jffs2_dbg_dump_block_lists_nolock(c);
+ 
++	if (c->flags & (1 << 7)) {
++		printk("%s(): unlocking the mtd device... ", __func__);
++		if (c->mtd->unlock)
++			c->mtd->unlock(c->mtd, 0, c->mtd->size);
++		printk("done.\n");
++
++		printk("%s(): erasing all blocks after the end marker... ", __func__);
++		jffs2_erase_pending_blocks(c, -1);
++		printk("done.\n");
++	}
++
+ 	dbg_fsbuild("pass 1 starting\n");
+ 	c->flags |= JFFS2_SB_FLAG_BUILDING;
+ 	/* Now scan the directory tree, increasing nlink according to every dirent found. */
+--- a/fs/jffs2/scan.c
++++ b/fs/jffs2/scan.c
+@@ -72,7 +72,7 @@ static int file_dirty(struct jffs2_sb_in
+ 		return ret;
+ 	if ((ret = jffs2_scan_dirty_space(c, jeb, jeb->free_size)))
+ 		return ret;
+-	/* Turned wasted size into dirty, since we apparently 
++	/* Turned wasted size into dirty, since we apparently
+ 	   think it's recoverable now. */
+ 	jeb->dirty_size += jeb->wasted_size;
+ 	c->dirty_size += jeb->wasted_size;
+@@ -144,8 +144,11 @@ int jffs2_scan_medium(struct jffs2_sb_in
+ 		/* reset summary info for next eraseblock scan */
+ 		jffs2_sum_reset_collected(s);
+ 
+-		ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
+-						buf_size, s);
++		if (c->flags & (1 << 7))
++			ret = BLK_STATE_ALLFF;
++		else
++			ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
++							buf_size, s);
+ 
+ 		if (ret < 0)
+ 			goto out;
+@@ -400,7 +403,7 @@ static int jffs2_scan_xref_node(struct j
+ 	if (!ref)
+ 		return -ENOMEM;
+ 
+-	/* BEFORE jffs2_build_xattr_subsystem() called, 
++	/* BEFORE jffs2_build_xattr_subsystem() called,
+ 	 * and AFTER xattr_ref is marked as a dead xref,
+ 	 * ref->xid is used to store 32bit xid, xd is not used
+ 	 * ref->ino is used to store 32bit inode-number, ic is not used
+@@ -473,7 +476,7 @@ static int jffs2_scan_eraseblock (struct
+ 		struct jffs2_sum_marker *sm;
+ 		void *sumptr = NULL;
+ 		uint32_t sumlen;
+-	      
++
+ 		if (!buf_size) {
+ 			/* XIP case. Just look, point at the summary if it's there */
+ 			sm = (void *)buf + c->sector_size - sizeof(*sm);
+@@ -489,9 +492,9 @@ static int jffs2_scan_eraseblock (struct
+ 				buf_len = sizeof(*sm);
+ 
+ 			/* Read as much as we want into the _end_ of the preallocated buffer */
+-			err = jffs2_fill_scan_buf(c, buf + buf_size - buf_len, 
++			err = jffs2_fill_scan_buf(c, buf + buf_size - buf_len,
+ 						  jeb->offset + c->sector_size - buf_len,
+-						  buf_len);				
++						  buf_len);
+ 			if (err)
+ 				return err;
+ 
+@@ -510,9 +513,9 @@ static int jffs2_scan_eraseblock (struct
+ 				}
+ 				if (buf_len < sumlen) {
+ 					/* Need to read more so that the entire summary node is present */
+-					err = jffs2_fill_scan_buf(c, sumptr, 
++					err = jffs2_fill_scan_buf(c, sumptr,
+ 								  jeb->offset + c->sector_size - sumlen,
+-								  sumlen - buf_len);				
++								  sumlen - buf_len);
+ 					if (err)
+ 						return err;
+ 				}
+@@ -525,7 +528,7 @@ static int jffs2_scan_eraseblock (struct
+ 
+ 			if (buf_size && sumlen > buf_size)
+ 				kfree(sumptr);
+-			/* If it returns with a real error, bail. 
++			/* If it returns with a real error, bail.
+ 			   If it returns positive, that's a block classification
+ 			   (i.e. BLK_STATE_xxx) so return that too.
+ 			   If it returns zero, fall through to full scan. */
+@@ -546,6 +549,17 @@ static int jffs2_scan_eraseblock (struct
+ 			return err;
+ 	}
+ 
++	if ((buf[0] == 0xde) &&
++		(buf[1] == 0xad) &&
++		(buf[2] == 0xc0) &&
++		(buf[3] == 0xde)) {
++		/* end of filesystem. erase everything after this point */
++		printk("%s(): End of filesystem marker found at 0x%x\n", __func__, jeb->offset);
++		c->flags |= (1 << 7);
++
++		return BLK_STATE_ALLFF;
++	}
++
+ 	/* We temporarily use 'ofs' as a pointer into the buffer/jeb */
+ 	ofs = 0;
+ 
+@@ -671,7 +685,7 @@ scan_more:
+ 				scan_end = buf_len;
+ 				goto more_empty;
+ 			}
+-			
++
+ 			/* See how much more there is to read in this eraseblock... */
+ 			buf_len = min_t(uint32_t, buf_size, jeb->offset + c->sector_size - ofs);
+ 			if (!buf_len) {
+@@ -907,7 +921,7 @@ scan_more:
+ 
+ 	D1(printk(KERN_DEBUG "Block at 0x%08x: free 0x%08x, dirty 0x%08x, unchecked 0x%08x, used 0x%08x, wasted 0x%08x\n",
+ 		  jeb->offset,jeb->free_size, jeb->dirty_size, jeb->unchecked_size, jeb->used_size, jeb->wasted_size));
+-	
++
+ 	/* mark_node_obsolete can add to wasted !! */
+ 	if (jeb->wasted_size) {
+ 		jeb->dirty_size += jeb->wasted_size;
diff --git a/target/linux/generic/patches-2.6.30/205-skb_padding.patch b/target/linux/generic/patches-2.6.30/205-skb_padding.patch
new file mode 100644
index 0000000000..06b494b91b
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/205-skb_padding.patch
@@ -0,0 +1,56 @@
+--- a/include/linux/skbuff.h
++++ b/include/linux/skbuff.h
+@@ -1369,11 +1369,18 @@ static inline int skb_network_offset(con
+  *
+  * Various parts of the networking layer expect at least 32 bytes of
+  * headroom, you should not reduce this.
++ *
++ * This has been changed to 64 to acommodate for routing between ethernet
++ * and wireless, but only for new allocations
+  */
+ #ifndef NET_SKB_PAD
+ #define NET_SKB_PAD	32
+ #endif
+ 
++#ifndef NET_SKB_PAD_ALLOC
++#define NET_SKB_PAD_ALLOC	64
++#endif
++
+ extern int ___pskb_trim(struct sk_buff *skb, unsigned int len);
+ 
+ static inline void __skb_trim(struct sk_buff *skb, unsigned int len)
+@@ -1463,9 +1470,9 @@ static inline void __skb_queue_purge(str
+ static inline struct sk_buff *__dev_alloc_skb(unsigned int length,
+ 					      gfp_t gfp_mask)
+ {
+-	struct sk_buff *skb = alloc_skb(length + NET_SKB_PAD, gfp_mask);
++	struct sk_buff *skb = alloc_skb(length + NET_SKB_PAD_ALLOC, gfp_mask);
+ 	if (likely(skb))
+-		skb_reserve(skb, NET_SKB_PAD);
++		skb_reserve(skb, NET_SKB_PAD_ALLOC);
+ 	return skb;
+ }
+ 
+@@ -1538,7 +1545,7 @@ static inline int __skb_cow(struct sk_bu
+ 		delta = headroom - skb_headroom(skb);
+ 
+ 	if (delta || cloned)
+-		return pskb_expand_head(skb, ALIGN(delta, NET_SKB_PAD), 0,
++		return pskb_expand_head(skb, ALIGN(delta, NET_SKB_PAD_ALLOC), 0,
+ 					GFP_ATOMIC);
+ 	return 0;
+ }
+--- a/net/core/skbuff.c
++++ b/net/core/skbuff.c
+@@ -327,9 +327,9 @@ struct sk_buff *__netdev_alloc_skb(struc
+ 	int node = dev->dev.parent ? dev_to_node(dev->dev.parent) : -1;
+ 	struct sk_buff *skb;
+ 
+-	skb = __alloc_skb(length + NET_SKB_PAD, gfp_mask, 0, node);
++	skb = __alloc_skb(length + NET_SKB_PAD_ALLOC, gfp_mask, 0, node);
+ 	if (likely(skb)) {
+-		skb_reserve(skb, NET_SKB_PAD);
++		skb_reserve(skb, NET_SKB_PAD_ALLOC);
+ 		skb->dev = dev;
+ 	}
+ 	return skb;
diff --git a/target/linux/generic/patches-2.6.30/207-powerpc_asm_segment_h.patch b/target/linux/generic/patches-2.6.30/207-powerpc_asm_segment_h.patch
new file mode 100644
index 0000000000..1272e82c75
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/207-powerpc_asm_segment_h.patch
@@ -0,0 +1,9 @@
+--- /dev/null
++++ b/include/asm-powerpc/segment.h
+@@ -0,0 +1,6 @@
++#ifndef _ASM_SEGMENT_H
++#define _ASM_SEGMENT_H
++
++/* Only here because we have some old header files that expect it.. */
++
++#endif /* _ASM_SEGMENT_H */
diff --git a/target/linux/generic/patches-2.6.30/209-mini_fo.patch b/target/linux/generic/patches-2.6.30/209-mini_fo.patch
new file mode 100644
index 0000000000..bb6f381a14
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/209-mini_fo.patch
@@ -0,0 +1,7780 @@
+--- a/fs/Kconfig
++++ b/fs/Kconfig
+@@ -168,6 +168,7 @@ source "fs/ubifs/Kconfig"
+ source "fs/cramfs/Kconfig"
+ source "fs/squashfs/Kconfig"
+ source "fs/freevxfs/Kconfig"
++source "fs/mini_fo/Kconfig"
+ source "fs/minix/Kconfig"
+ source "fs/omfs/Kconfig"
+ source "fs/hpfs/Kconfig"
+--- a/fs/Makefile
++++ b/fs/Makefile
+@@ -77,6 +77,7 @@ obj-$(CONFIG_SQUASHFS)		+= squashfs/
+ obj-y				+= ramfs/
+ obj-$(CONFIG_HUGETLBFS)		+= hugetlbfs/
+ obj-$(CONFIG_CODA_FS)		+= coda/
++obj-$(CONFIG_MINI_FO)		+= mini_fo/
+ obj-$(CONFIG_MINIX_FS)		+= minix/
+ obj-$(CONFIG_FAT_FS)		+= fat/
+ obj-$(CONFIG_BFS_FS)		+= bfs/
+--- /dev/null
++++ b/fs/mini_fo/aux.c
+@@ -0,0 +1,577 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++
++/* check if file exists in storage  */
++int exists_in_storage(dentry_t *dentry)
++{
++	check_mini_fo_dentry(dentry);
++	if(dtost(dentry) == MODIFIED || dtost(dentry) == CREATED || dtost(dentry) == DEL_REWRITTEN)
++		return 1;
++	return 0;
++}
++
++/* check if dentry is in an existing state */
++int is_mini_fo_existant(dentry_t *dentry)
++{
++	check_mini_fo_dentry(dentry);
++
++	if(dtost(dentry) == DELETED || dtost(dentry) == NON_EXISTANT)
++		return 0;
++	else
++		return 1;
++}
++
++/*
++ * This function will create a negative storage dentry for
++ * dentry, what is required for many create like options.
++ * It will create the storage structure if necessary.
++ */
++int get_neg_sto_dentry(dentry_t *dentry)
++{
++	int err = 0;
++	unsigned int len;
++	const unsigned char *name;
++
++	if(!dentry ||
++	   !dtopd(dentry) ||
++	   !(dtost(dentry) == UNMODIFIED ||
++	     dtost(dentry) == NON_EXISTANT ||
++	     dtost(dentry) == DELETED)) {
++		printk(KERN_CRIT "mini_fo: get_neg_sto_dentry: invalid dentry passed.\n");
++		err = -1;
++		goto out;
++	}
++	/* Have we got a neg. dentry already? */
++	if(dtohd2(dentry)) {
++		err = 0;
++		goto out;
++	}
++	if(dtost(dentry->d_parent) == UNMODIFIED) {
++		/* build sto struct */
++		err = build_sto_structure(dentry->d_parent->d_parent, dentry->d_parent);
++		if(err ||
++		   dtost(dentry->d_parent) != MODIFIED) {
++			printk(KERN_CRIT "mini_fo: get_neg_sto_dentry: ERROR building sto structure.\n");
++			err = -1;
++			goto out;
++		}
++	}
++
++	len = dentry->d_name.len;
++	name = dentry->d_name.name;
++
++	dtohd2(dentry) =
++		lookup_one_len(name, dtohd2(dentry->d_parent), len);
++
++ out:
++	return err;
++}
++
++int check_mini_fo_dentry(dentry_t *dentry)
++{
++ 	ASSERT(dentry != NULL);
++	ASSERT(dtopd(dentry) != NULL);
++	ASSERT((dtohd(dentry) != NULL) || (dtohd2(dentry) != NULL));
++
++/* 	if(dtost(dentry) == MODIFIED) { */
++/* 		ASSERT(dentry->d_inode != NULL); */
++/* 		ASSERT(dtohd(dentry) != NULL); */
++/* 		ASSERT(dtohd(dentry)->d_inode != NULL); */
++/* 		ASSERT(dtohd2(dentry) != NULL); */
++/* 		ASSERT(dtohd2(dentry)->d_inode != NULL); */
++/* 	} */
++/* 	else if(dtost(dentry) == UNMODIFIED) { */
++/* 		ASSERT(dentry->d_inode != NULL); */
++/* 		ASSERT( */
++/* 	} */
++	return 0;
++}
++
++int check_mini_fo_file(file_t *file)
++{
++	ASSERT(file != NULL);
++	ASSERT(ftopd(file) != NULL);
++	ASSERT(file->f_dentry != NULL);
++
++	/* violent checking, check depending of state and type
++	 *	if(S_ISDIR(file->f_dentry->d_inode->i_mode)) {}
++	 */
++	ASSERT((ftohf(file) != NULL) || (ftohf2(file) != NULL));
++	return 0;
++}
++
++int check_mini_fo_inode(inode_t *inode)
++{
++	ASSERT(inode != NULL);
++	ASSERT(itopd(inode) != NULL);
++	ASSERT((itohi(inode) != NULL) || (itohi2(inode) != NULL));
++	return 0;
++}
++
++/*
++ * will walk a base path as provided by get_mini_fo_bpath and return
++ * the (hopefully ;-) ) positive dentry of the renamed base dir.
++ *
++ * This does some work of path_init.
++ */
++dentry_t *bpath_walk(super_block_t *sb, char *bpath)
++{
++	int err;
++        struct vfsmount *mnt;
++	struct nameidata nd;
++
++	/* be paranoid */
++	if(!bpath || bpath[0] != '/') {
++		printk(KERN_CRIT "mini_fo: bpath_walk: Invalid string.\n");
++		return NULL;
++	}
++	if(!sb || !stopd(sb)) {
++		printk(KERN_CRIT "mini_fo: bpath_walk: Invalid sb.\n");
++		return NULL;
++	}
++
++	/* fix this: how do I reach this lock?
++	 * read_lock(&current->fs->lock); */
++	mnt = mntget(stopd(sb)->hidden_mnt);
++	/* read_unlock(&current->fs->lock); */
++
++	err = vfs_path_lookup(mnt->mnt_root, mnt, bpath+1, 0, &nd);
++
++	/* validate */
++	if (err || !nd.dentry || !nd.dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: bpath_walk: path_walk failed.\n");
++		return NULL;
++	}
++	return nd.dentry;
++}
++
++
++/* returns the full path of the basefile incl. its name */
++int get_mini_fo_bpath(dentry_t *dentry, char **bpath, int *bpath_len)
++{
++	char *buf_walker;
++	int len = 0;
++	dentry_t *sky_walker;
++
++	if(!dentry || !dtohd(dentry)) {
++		printk(KERN_CRIT "mini_fo: get_mini_fo_bpath: invalid dentry passed.\n");
++		return -1;
++	}
++	sky_walker = dtohd(dentry);
++
++	do {
++		len += sky_walker->d_name.len + 1 ; /* 1 for '/' */
++		sky_walker = sky_walker->d_parent;
++	} while(sky_walker != stopd(dentry->d_inode->i_sb)->base_dir_dentry);
++
++	/* 1 to oil the loop */
++	*bpath = (char*)  kmalloc(len + 1, GFP_KERNEL);
++	if(!*bpath) {
++		printk(KERN_CRIT "mini_fo: get_mini_fo_bpath: out of mem.\n");
++		return -1;
++	}
++	buf_walker = *bpath+len; /* put it on last char */
++	*buf_walker = '\n';
++	sky_walker = dtohd(dentry);
++
++	do {
++		buf_walker -= sky_walker->d_name.len;
++		strncpy(buf_walker,
++			sky_walker->d_name.name,
++			sky_walker->d_name.len);
++		*(--buf_walker) = '/';
++		sky_walker = sky_walker->d_parent;
++	} while(sky_walker != stopd(dentry->d_inode->i_sb)->base_dir_dentry);
++
++	/* bpath_len doesn't count newline! */
++	*bpath_len = len;
++ 	return 0;
++}
++
++int mini_fo_cp_cont(dentry_t *tgt_dentry, struct vfsmount *tgt_mnt,
++		    dentry_t *src_dentry, struct vfsmount *src_mnt)
++{
++	void *buf;
++	mm_segment_t old_fs;
++	file_t *tgt_file;
++	file_t *src_file;
++	int bytes, len, tmp, err;
++	err = 0;
++
++	if(!(tgt_dentry->d_inode && src_dentry->d_inode)) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR, neg. dentry passed.\n");
++		err = -EINVAL;
++		goto out;
++	}
++
++	dget(tgt_dentry);
++	dget(src_dentry);
++	mntget(tgt_mnt);
++	mntget(src_mnt);
++
++	/* open file write only */
++	tgt_file = dentry_open(tgt_dentry, tgt_mnt, 0x1);
++	if(!tgt_file || IS_ERR(tgt_file)) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR opening target file.\n");
++		err = PTR_ERR(tgt_file);
++		goto out_err;
++	}
++
++	/* open file read only */
++	src_file = dentry_open(src_dentry, src_mnt, 0x0);
++	if(!src_file || IS_ERR(src_file)) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR opening source file.\n");
++		err = PTR_ERR(src_file);
++
++		/* close target file */
++		fput(tgt_file);
++		goto out_err;
++	}
++
++	/* check if the filesystem(s) support read respective write */
++	if(!src_file->f_op->read || !tgt_file->f_op->write) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR, no fs read or write support.\n");
++		err = -EPERM;
++		goto out_close;
++	}
++
++	/* allocate a page for transfering the data */
++	buf = (void *) __get_free_page(GFP_KERNEL);
++	if(!buf) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR, out of kernel mem.\n");
++		goto out_err;
++	}
++
++	tgt_file->f_pos = 0;
++	src_file->f_pos = 0;
++
++	old_fs = get_fs();
++	set_fs(KERNEL_DS);
++
++	/* Doing this I assume that a read operation will return a full
++	 * buffer while there is still data to read, and a less than
++	 * full buffer when all data has been read.
++	 */
++	bytes = len = PAGE_SIZE;
++	while(bytes == len) {
++		bytes = src_file->f_op->read(src_file, buf, len,
++					     &src_file->f_pos);
++		tmp = tgt_file->f_op->write(tgt_file, buf, bytes,
++					    &tgt_file->f_pos);
++		if(tmp != bytes) {
++			printk(KERN_CRIT "mini_fo_cp_cont: ERROR writing.\n");
++			goto out_close_unset;
++		}
++	}
++
++	free_page((unsigned long) buf);
++	set_fs(old_fs);
++	fput(tgt_file);
++	fput(src_file);
++	goto out;
++
++ out_close_unset:
++	free_page((unsigned long) buf);
++	set_fs(old_fs);
++
++ out_close:
++	fput(tgt_file);
++	fput(src_file);
++
++ out_err:
++	dput(tgt_dentry);
++	dput(src_dentry);
++
++	/* mk: not sure if this need to be done */
++	mntput(tgt_mnt);
++	mntput(src_mnt);
++
++ out:
++	return err;
++}
++
++/* mk:
++ * ndl (no-duplicate list) stuff
++ * This is used in mini_fo_readdir, to save the storage directory contents
++ * and later when reading base, match them against the list in order
++ * to avoid duplicates.
++ */
++
++/* add a file specified by name and len to the ndl
++ * Return values: 0 on success, <0 on failure.
++ */
++int ndl_add_entry(struct readdir_data *rd, const char *name, int len)
++{
++	struct ndl_entry *tmp_entry;
++
++	tmp_entry = (struct ndl_entry *)
++		kmalloc(sizeof(struct ndl_entry), GFP_KERNEL);
++	if(!tmp_entry) {
++                printk(KERN_CRIT "mini_fo: ndl_add_entry: out of mem.\n");
++                return -ENOMEM;
++        }
++        tmp_entry->name = (char*) kmalloc(len, GFP_KERNEL);
++        if(!tmp_entry->name) {
++                printk(KERN_CRIT "mini_fo: ndl_add_entry: out of mem.\n");
++                return -ENOMEM;
++        }
++	strncpy(tmp_entry->name, name, len);
++        tmp_entry->len = len;
++
++        list_add(&tmp_entry->list, &rd->ndl_list);
++        rd->ndl_size++;
++        return 0;
++}
++
++/* delete all list entries and free memory */
++void ndl_put_list(struct readdir_data *rd)
++{
++	struct list_head *tmp;
++	struct ndl_entry *tmp_entry;
++
++	if(rd->ndl_size <= 0)
++		return;
++	while(!list_empty(&rd->ndl_list)) {
++		tmp = rd->ndl_list.next;
++                list_del(tmp);
++                tmp_entry = list_entry(tmp, struct ndl_entry, list);
++		kfree(tmp_entry->name);
++                kfree(tmp_entry);
++        }
++	rd->ndl_size = 0;
++}
++
++/* Check if a file specified by name and len is in the ndl
++ * Return value: 0 if not in list, 1 if file is found in ndl.
++ */
++int ndl_check_entry(struct readdir_data *rd, const char *name, int len)
++{
++	struct list_head *tmp;
++	struct ndl_entry *tmp_entry;
++
++	if(rd->ndl_size <= 0)
++		return 0;
++
++	list_for_each(tmp, &rd->ndl_list) {
++                tmp_entry = list_entry(tmp, struct ndl_entry, list);
++                if(tmp_entry->len != len)
++                        continue;
++                if(!strncmp(tmp_entry->name, name, len))
++                        return 1;
++        }
++        return 0;
++}
++
++/* mk:
++ * Recursive function to create corresponding directorys in the storage fs.
++ * The function will build the storage directorys up to dentry.
++ */
++int build_sto_structure(dentry_t *dir, dentry_t *dentry)
++{
++	int err;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++
++	if(dentry->d_parent != dir) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: invalid parameter or meta data corruption [1].\n");
++		return 1;
++	}
++
++       	if(dtost(dir) != MODIFIED) {
++		err = build_sto_structure(dir->d_parent, dentry->d_parent);
++		if(err)
++			return err;
++	}
++
++	/* ok, coming back again. */
++	check_mini_fo_dentry(dentry);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	if(!hidden_sto_dentry) {
++		/*
++		 * This is the case after creating the first
++		 * hidden_sto_dentry.
++		 * After one negative storage_dentry, all pointers to
++		 * hidden_storage dentries are set to NULL. We need to
++		 * create the negative dentry before we create the storage
++		 * file.
++		 */
++		unsigned int len;
++		const unsigned char *name;
++		len = dtohd(dentry)->d_name.len;
++		name = dtohd(dentry)->d_name.name;
++		hidden_sto_dentry = lookup_one_len(name, dtohd2(dir), len);
++		dtohd2(dentry) = hidden_sto_dentry;
++	}
++
++	/* was:	hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	/* lets be safe */
++	if(dtohd2(dir) != hidden_sto_dir_dentry) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: invalid parameter or meta data corruption [2].\n");
++		return 1;
++	}
++
++	/* check for errors in lock_parent */
++	err = PTR_ERR(hidden_sto_dir_dentry);
++	if(IS_ERR(hidden_sto_dir_dentry)) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: lock_parent failed.\n");
++		return err;
++	}
++
++	err = vfs_mkdir(hidden_sto_dir_dentry->d_inode,
++			hidden_sto_dentry,
++			dir->d_inode->i_mode);
++
++	if(err) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: failed to create storage dir [1].\n");
++		/* was: unlock_dir(dir); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&dir->d_inode->i_mutex);
++#else
++		up(&dir->d_inode->i_sem);
++#endif
++		dput(dir);
++		return err;
++	}
++
++	/* everything ok! */
++	if(!dtohd2(dentry)->d_inode) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: failed to create storage dir [2].\n");
++		/* was: unlock_dir(dir); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&dir->d_inode->i_mutex);
++#else
++		up(&dir->d_inode->i_sem);
++#endif
++		dput(dir);
++		return 1;
++	}
++
++	/* interpose the new inode and set new state */
++	itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++	dtopd(dentry)->state = MODIFIED;
++
++	/* initalize the wol list */
++	itopd(dentry->d_inode)->deleted_list_size = -1;
++	itopd(dentry->d_inode)->renamed_list_size = -1;
++	meta_build_lists(dentry);
++
++	fist_copy_attr_all(dentry->d_inode, itohi2(dentry->d_inode));
++	fist_copy_attr_timesizes(dir->d_inode,
++				 hidden_sto_dir_dentry->d_inode);
++	dir->d_inode->i_nlink++;
++	/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++	return 0;
++}
++
++
++#if 0 /* unused */
++
++/*
++ * Read "len" bytes from "filename" into "buf".
++ * "buf" is in kernel space.
++ */
++int
++mini_fo_read_file(const char *filename, void *buf, int len)
++{
++    file_t *filp;
++    mm_segment_t oldfs;
++    int bytes;
++    /* Chroot? Maybe NULL isn't right here */
++    filp = filp_open(filename, O_RDONLY, 0);
++    if (!filp || IS_ERR(filp)) {
++	printk("mini_fo_read_file err %d\n", (int) PTR_ERR(filp));
++	return -1;  /* or do something else */
++    }
++
++    if (!filp->f_op->read)
++	return -2;  /* file(system) doesn't allow reads */
++
++    /* now read len bytes from offset 0 */
++    filp->f_pos = 0;		/* start offset */
++    oldfs = get_fs();
++    set_fs(KERNEL_DS);
++    bytes = filp->f_op->read(filp, buf, len, &filp->f_pos);
++    set_fs(oldfs);
++
++    /* close the file */
++    fput(filp);
++
++    return bytes;
++}
++
++
++
++/*
++ * Write "len" bytes from "buf" to "filename"
++ * "buf" is in kernel space.
++ */
++int
++mini_fo_write_file(const char *filename, void *buf, int len)
++{
++    file_t *filp;
++    mm_segment_t oldfs;
++    int bytes;
++				/* Chroot? Maybe NULL isn't right here */
++    filp = filp_open(filename, O_RDWR|O_CREAT, 0640);
++    if (!filp || IS_ERR(filp)) {
++	printk("mini_fo_write_file err %d\n", (int) PTR_ERR(filp));
++	return -1;  /* or do something else */
++    }
++
++    if (!filp->f_op->write)
++	return -2;  /* file(system) doesn't allow writes */
++
++    /* now write len bytes from offset 0 */
++    filp->f_pos = 0;		/* start offset */
++    oldfs = get_fs();
++    set_fs(KERNEL_DS);
++    bytes = filp->f_op->write(filp, buf, len, &filp->f_pos);
++    set_fs(oldfs);
++
++    /* close the file */
++    fput(filp);
++
++    return bytes;
++}
++
++#endif /* unused */
++
+--- /dev/null
++++ b/fs/mini_fo/ChangeLog
+@@ -0,0 +1,281 @@
++2006-01-24  Markus Klotzbuecher  <mk@mary.denx.de>
++
++	* Add tons of ugly ifdefs to Ed L. Cashin's mutex patch to
++          retain backwards compatibility.
++
++2006-01-24  Ed L. Cashin <ecashin@coraid.com>
++
++	* Support for the new mutex infrastructure
++	(7892f2f48d165a34b0b8130c8a195dfd807b8cb6)
++
++2005-10-15  Markus Klotzbuecher  <mk@localhost.localdomain>
++
++	* Bugfix for a serious memory leak in mini_fo_follow_link.
++
++2005-09-21  Markus Klotzbuecher  <mk@mary>
++
++	* new release 0.6.1
++
++	* fix of a compiler warning due to changes in 2.6.13
++
++2005-09-21  Klaus Wenninger  <klaus.wenninger@siemens.com>
++
++	* file.c: readdir: fix for a bug that caused directory entries
++          to show up twice when using storage filesystems such as
++          minixfs or pramfs.
++
++2005-06-30  Eric Lammerts <eric@lammerts.org>
++
++	* fix for an oops when overwriting a binary thats beeing
++          executed.
++
++2005-06-09    <mk@mary>
++
++	* Renamed overlay to mini_fo-overlay.
++
++	* Added mini_fo-merge script to allow merging of storage and base
++	after making modifications.
++
++2005-05-22  root  <mk@mary>
++
++	* Added overlay script that allows to easily mount mini_fo ontop
++	of a given base directory
++
++2005-05-10    <mk@mary>
++
++	* inode.c: xattr functions return -EOPNOSUPP instead of
++          -ENOSUPP, what confuses "ls -l"
++
++	* Changed license from LGPL to GPL.
++
++2005-05-08  root  <mk@mary>
++
++	* Makefile: clean it up and added make install and make
++          uninstall.
++
++2005-05-06    <mk@mary>
++
++	* merged devel branch back to main. [v0-6-0-pre3]
++
++	* removed unused files print.c and fist_ioctl. [devel-0-0-18]
++
++	* ioctl: removed fist_ioctl stuff, that is not needed for
++          now.
++
++2005-05-03    <mk@mary>
++
++	* file.c: simplified mini_fo_open and mini_fo_setattr using
++          new state changing functions. [devel-0-0-17]
++
++	* inode.c: Fixed getattr state bug (see below) in 2.4 function
++          mini_fo_inode revalidate.
++
++	* inode.c: found an other bug in mini_fo_getattr. States are not
++	  reliable in this function, as a file can be opened, unlinked and
++	  the getattr function called. This results in a deleted dentry
++	  with an inode. Fix is to ignore states and simply use the inode
++	  available.
++
++2005-04-29    <mk@mary>
++
++	* file.c: Bugfix and cleanup in fasync and fsync. [devel-0-0-16]
++
++	* file.c: do not use mini_fo_lock so the generic version is
++          used (I guess).
++
++	* inode.c: getattr, never call getattr on lower files, as this
++          will cause the inum to change.
++
++	* inode.c: rename_reg_file renamed to rename_nondir, as it
++          doesn't matter as long it't not a dir. Removed all
++          rename_dev_file etc.
++
++	* tagged as devel-0-0-15
++
++	* inode.c: added support for chosing support for extended
++          attrs at compile time by XATTR define in mini_fo.h .
++
++	* inode.c: fixed mini_fo_getattr to use mini_fo inode and not
++          lower again, what avoids inode number changes that confused
++          rm again. This is the proper solution.
++
++2005-04-24    <mk@mary>
++
++	* all files: updated Copyright notive to 2005. [devel-0-0-14]
++
++	* inode.c: fixed mini_fo_getattr to not change the inode
++          number, even if lower files change.
++
++	* super.c: fixed a bug that caused deleted base file to show
++          up suddenly after some time, or after creating a special
++          file. The problem was that after some time or after special
++          file creating sync_sb_inodes is called by the vfs, that
++          called our mini_fo_put_inode. There was (wrongly) called
++          __meta_put_lists, that nuked the lists, although the inode
++          was going to continue its life. Moving __meta_put_lists to
++          mini_fo_clear_inode, where an inode is really destroyed,
++          solved the problem.
++
++
++2005-04-23    <mk@mary>
++
++	* state.c, aux.c: more cleaning up and
++          simplifications. [devel-0-0-13]
++
++	* inode.c: implemented mini_fo_getattr, that was required for
++          2.6 because inode_revalidate has been remove there, and the
++	  old "du" bug returned.
++
++
++2005-04-20    <mk@mary>
++
++	* aux.c: get_neg_sto_dentry(): allow to be called for dentries
++          in state UNMODIFIED, NON_EXISTANT _and_ DELETED.
++
++2005-04-19    <mk@mary>
++
++	* Fixed a bug under 2.6 that caused files deleted via mini_fo
++          not to be deleted properly and therefore the fs filled up
++          untill no memory was left. [devel-0-0-12]
++
++	* Added basic hard link support. This means that creating
++          hardlinks will work, but existing ones will be treated as
++          individual files. [devel-0-0-11]
++
++2005-04-17    <mk@mary>
++
++	* Bugfixes
++
++2005-04-13  root  <mk@mary>
++
++	* Added file state.c for the state transition
++          functions. Doesn't work very well yet, though...
++
++2005-04-12    <mk@mary>
++
++	* Porting to 2.6 started, which is easier than expected, also
++          due to Olivier previous work.
++
++2005-04-08    <mk@mary>
++
++	* Fixed the bug that caused du to return invalid sizes of
++          directory trees. The problem was that
++          mini_fo_inode_revalidate didn't always copy the attributes
++          from the base inode properly.
++
++2005-04-01  Markus Klotzbuecher  <mk@chasey>
++
++	* Merged devel branch back to main trunk and updated the
++          RELEASE notes. This will be 0-6-0-pre1.
++
++2005-03-31  Markus Klotzbuecher  <mk@chasey>
++
++	* Fixed some bugs in rename_reg_file, that only showed up in
++          the kernel compile test. Kernel compiles cleanly ontop of
++          mini_fo, now also make mrproper etc. work. Seems pretty stable.
++
++2005-03-28  Markus Klotzbuecher  <mk@chasey>
++
++	* Many, many directory renaming bugfixes and a lot of other
++          cleanup. Dir renaming seems to work relatively stable.
++
++2005-03-22  Markus Klotzbuecher  <mk@chasey>
++
++	* Finished implementing lightweight directory renaming. Some
++          basic testing indicates it works fine.
++	  Next is to implement testcases for the testsuite and confirm
++          everything is really working ok.
++
++2005-03-18  Markus Klotzbuecher  <mk@chasey>
++
++	* Finished implementing meta.c stuff required for directory
++          renaming.
++
++2005-03-17  Markus Klotzbuecher  <mk@chasey>
++
++	* Fixed all compile warnings + an extremly old bug that
++          somehow crept in while reworking the wol stuff to the META
++          system. Turning on -Werror again... :-)
++
++	* Fixed some bugs in the new rename_reg_file function.
++
++	* Rewrote mini_fo rename and split it into several
++          subfunctions, that handle the different types
++          seperately. Rewrote the regular file function aswell, as it
++          was implemented somewhat inefficient.
++
++2005-03-16  Markus Klotzbuecher  <mk@chasey>
++
++	* Implemented new META subsystem, removed old WOL stuff in favor
++	  if it.
++
++	* After some basic testing everything seems ok...
++
++2005-03-11  Markus Klotzbuecher  <mk@chasey>
++
++	* Renaming a non regular file caused trouble because I always
++	  tried to copy the contents. Now I only do this for regular
++	  files. mini_fo_rename still isn't implemented properly, renaming
++	  of device files, symlinks etc. results in a empty regular file
++	  instead of the proper type.
++
++	* Directory renaming suddenly works! What a surprise! I guess
++          this is because renaming is implemented as making a copy and
++          removing the original. Still this might not work
++          everywhere...
++
++2005-03-09  Markus Klotzbuecher  <mk@chasey>
++
++	* Bugfix, when a mini_fo directory that exists in storage
++  	  (state: MODIFIED, CREATED and DEL_REWRITTEN) is deleted, a
++  	  possibly existing WOL file contained in it needs to be
++  	  deleted too.
++
++	* Starting cleanup: defined state names in order to get rid of
++          the state numbers.
++
++2005-03-08  Markus Klotzbuecher  <mk@chasey>
++
++	* Makefile fix, fist_ioctl was built against wrong sources if ARCH=um
++
++	* Fixed a bug in dentry.c, mini_fo_d_hash. In state 4 =
++          DEL_REWRITTEN the hash was calculated from the base dentry,
++          which was wrong and and caused assertions in
++          __mini_fo_hidden_dentry to fail.
++
++2005-02-21    <mk@mary>
++
++	* Implemented directory deleting (inode.c)
++
++	* main.c: made mini_fo_parse_options a little more robust.
++
++2004-12-22    <mk@mary>
++
++	* Makefile cleanup and uml stuff, removed unneccessary files
++
++	* Created a new and hopefully more informative README
++
++	* CHANGELOG: created a new CHANGELOG and added old entries reversely
++
++
++2004-10-24 Gleb Natapov <gleb@nbase.co.il>
++
++	* Fix: owner and group where not correctly copied from base to
++          storage.
++
++
++2004-10-05 Gleb Natapov <gleb@nbase.co.il>
++
++	* Implementation of fsync, fasync and lock mini_fo functions.
++
++
++2004-09-29 Bob Lee <bob@pantasys.com>
++
++	* Fix of a serious pointer bug
++
++
++2004-09-28 Gleb Natapov <gleb@nbase.co.il>
++
++	* Implementation of mini_fo_mknod and mini_fo_rename, support
++          for device files.
++
+--- /dev/null
++++ b/fs/mini_fo/dentry.c
+@@ -0,0 +1,244 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++
++/*
++ * THIS IS A BOOLEAN FUNCTION: returns 1 if valid, 0 otherwise.
++ */
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_d_revalidate(dentry_t *dentry, struct nameidata *nd)
++#else
++mini_fo_d_revalidate(dentry_t *dentry, int flags)
++#endif
++{
++	int err1 = 1; /* valid = 1, invalid = 0 */
++	int err2 = 1;
++	dentry_t *hidden_dentry;
++	dentry_t *hidden_sto_dentry;
++
++
++	check_mini_fo_dentry(dentry);
++
++	hidden_dentry  = dtohd(dentry);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	if(hidden_dentry &&
++	   hidden_dentry->d_op &&
++	   hidden_dentry->d_op->d_revalidate) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		err1 = hidden_dentry->d_op->d_revalidate(hidden_dentry, nd);
++#else
++		err1 = hidden_dentry->d_op->d_revalidate(hidden_dentry, flags);
++#endif
++	}
++	if(hidden_sto_dentry &&
++	   hidden_sto_dentry->d_op &&
++	   hidden_sto_dentry->d_op->d_revalidate) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		err2 = hidden_sto_dentry->d_op->d_revalidate(hidden_sto_dentry,
++							     nd);
++#else
++		err2 = hidden_sto_dentry->d_op->d_revalidate(hidden_sto_dentry,
++							     flags);
++#endif
++	}
++
++	/* mk: if one of the lower level dentries are valid,
++	 * the mini_fo dentry is too.
++	 */
++	return (err1 || err2);
++}
++
++
++STATIC int
++mini_fo_d_hash(dentry_t *dentry, qstr_t *name)
++{
++	int err = 0;
++	dentry_t *hidden_dentry;
++	dentry_t *hidden_sto_dentry;
++
++	/* hidden_dentry = mini_fo_hidden_dentry(dentry);
++	 * hidden_sto_dentry = mini_fo_hidden_sto_dentry(dentry); */
++
++	/* state 1, 3, 4, 5: build the hash for the storage dentry */
++	if((dtopd(dentry)->state == MODIFIED) ||
++	   (dtopd(dentry)->state == CREATED) ||
++	   (dtopd(dentry)->state == DEL_REWRITTEN) ||
++	   (dtopd(dentry)->state == DELETED)) {
++		hidden_sto_dentry = dtohd2(dentry);
++		if(hidden_sto_dentry &&
++		   hidden_sto_dentry->d_op &&
++		   hidden_sto_dentry->d_op->d_hash) {
++			err = hidden_sto_dentry->d_op->d_hash(hidden_sto_dentry, name);
++		}
++		goto out;
++	}
++	/* state 2: build the hash for the base dentry */
++	if(dtopd(dentry)->state == UNMODIFIED) {
++		hidden_dentry = dtohd(dentry);
++		if(hidden_dentry &&
++		   hidden_dentry->d_op &&
++		   hidden_dentry->d_op->d_hash) {
++			err = hidden_dentry->d_op->d_hash(hidden_dentry, name);
++		}
++		goto out;
++	}
++	/* state 6: build hash for the dentry that exists */
++	if(dtopd(dentry)->state == NON_EXISTANT) {
++		hidden_sto_dentry = dtohd2(dentry);
++		if(hidden_sto_dentry &&
++		   hidden_sto_dentry->d_op &&
++		   hidden_sto_dentry->d_op->d_hash) {
++			err = hidden_sto_dentry->d_op->d_hash(hidden_sto_dentry, name);
++			goto out;
++		}
++		hidden_dentry = dtohd(dentry);
++		if(hidden_dentry &&
++		   hidden_dentry->d_op &&
++		   hidden_dentry->d_op->d_hash) {
++			err = hidden_dentry->d_op->d_hash(hidden_dentry, name);
++			goto out;
++		}
++	}
++
++	printk(KERN_CRIT "mini_fo: d_hash: invalid state detected.\n");
++
++ out:
++	return err;
++}
++
++
++STATIC int
++mini_fo_d_compare(dentry_t *dentry, qstr_t *a, qstr_t *b)
++{
++	int err;
++	dentry_t *hidden_dentry=NULL;
++
++	/* hidden_dentry = mini_fo_hidden_dentry(dentry); */
++	if(dtohd2(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else if(dtohd(dentry))
++		hidden_dentry = dtohd(dentry);
++
++	if (hidden_dentry && hidden_dentry->d_op && hidden_dentry->d_op->d_compare) {
++		err = hidden_dentry->d_op->d_compare(hidden_dentry, a, b);
++	} else {
++		err = ((a->len != b->len) || memcmp(a->name, b->name, b->len));
++	}
++
++	return err;
++}
++
++
++int
++mini_fo_d_delete(dentry_t *dentry)
++{
++	dentry_t *hidden_dentry;
++	dentry_t *hidden_sto_dentry;
++	int err = 0;
++
++	/* this could be a negative dentry, so check first */
++	if (!dtopd(dentry)) {
++		printk(KERN_CRIT "mini_fo_d_delete: negative dentry passed.\n");
++		goto out;
++	}
++	hidden_dentry = dtohd(dentry);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	if(hidden_dentry) {
++		if(hidden_dentry->d_op &&
++		   hidden_dentry->d_op->d_delete) {
++			err = hidden_dentry->d_op->d_delete(hidden_dentry);
++		}
++	}
++	if(hidden_sto_dentry) {
++		if(hidden_sto_dentry->d_op &&
++		   hidden_sto_dentry->d_op->d_delete) {
++			err = hidden_sto_dentry->d_op->d_delete(hidden_sto_dentry);
++		}
++	}
++
++ out:
++	return err;
++}
++
++
++void
++mini_fo_d_release(dentry_t *dentry)
++{
++	dentry_t *hidden_dentry;
++	dentry_t *hidden_sto_dentry;
++
++
++	/* this could be a negative dentry, so check first */
++	if (!dtopd(dentry)) {
++		printk(KERN_CRIT "mini_fo_d_release: no private data.\n");
++		goto out;
++	}
++	hidden_dentry = dtohd(dentry);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	if(hidden_dentry) {
++		/* decrement hidden dentry's counter and free its inode */
++		dput(hidden_dentry);
++	}
++	if(hidden_sto_dentry) {
++                /* decrement hidden dentry's counter and free its inode */
++		dput(hidden_sto_dentry);
++	}
++
++	/* free private data (mini_fo_dentry_info) here */
++	kfree(dtopd(dentry));
++	__dtopd(dentry) = NULL;	/* just to be safe */
++ out:
++	return;
++}
++
++
++/*
++ * we don't really need mini_fo_d_iput, because dentry_iput will call iput() if
++ * mini_fo_d_iput is not defined. We left this implemented for ease of
++ * tracing/debugging.
++ */
++void
++mini_fo_d_iput(dentry_t *dentry, inode_t *inode)
++{
++	iput(inode);
++}
++
++
++struct dentry_operations mini_fo_dops = {
++	d_revalidate:	mini_fo_d_revalidate,
++	d_hash:		mini_fo_d_hash,
++	d_compare:		mini_fo_d_compare,
++	d_release:		mini_fo_d_release,
++	d_delete:		mini_fo_d_delete,
++	d_iput:		mini_fo_d_iput,
++};
+--- /dev/null
++++ b/fs/mini_fo/file.c
+@@ -0,0 +1,713 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++#define ROUND_UP(x) (((x)+sizeof(long)-1) & ~(sizeof(long)-1))
++
++/*******************
++ * File Operations *
++ *******************/
++
++STATIC loff_t
++mini_fo_llseek(file_t *file, loff_t offset, int origin)
++{
++	loff_t err;
++	file_t *hidden_file = NULL;
++
++	if(S_ISDIR(file->f_dentry->d_inode->i_mode)) {
++		/* Check if trying to llseek from a directory */
++		err = -EISDIR;
++		goto out;
++	}
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			hidden_file = ftohf(file);
++		}
++	}
++
++	/* always set hidden position to this one */
++	hidden_file->f_pos = file->f_pos;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	memcpy(&(hidden_file->f_ra),
++	       &(file->f_ra),
++	       sizeof(struct file_ra_state));
++#else
++	if (file->f_reada) { /* update readahead information if needed */
++		hidden_file->f_reada = file->f_reada;
++		hidden_file->f_ramax = file->f_ramax;
++		hidden_file->f_raend = file->f_raend;
++		hidden_file->f_ralen = file->f_ralen;
++		hidden_file->f_rawin = file->f_rawin;
++	}
++#endif
++	if (hidden_file->f_op && hidden_file->f_op->llseek)
++		err = hidden_file->f_op->llseek(hidden_file, offset, origin);
++	else
++		err = generic_file_llseek(hidden_file, offset, origin);
++
++	if (err < 0)
++		goto out;
++
++	if (err != file->f_pos) {
++		file->f_pos = err;
++		// ION maybe this?
++		// 	file->f_pos = hidden_file->f_pos;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++		file->f_reada = 0;
++#endif
++		file->f_version++;
++	}
++
++ out:
++	return err;
++}
++
++
++/* mk: fanout capable */
++STATIC ssize_t
++mini_fo_read(file_t *file, char *buf, size_t count, loff_t *ppos)
++{
++	int err = -EINVAL;
++	file_t *hidden_file = NULL;
++	loff_t pos = *ppos;
++
++	if(S_ISDIR(file->f_dentry->d_inode->i_mode)) {
++		/* Check if trying to read from a directory */
++		/* printk(KERN_CRIT "mini_fo_read: ERROR: trying to read data from a directory.\n"); */
++		err = -EISDIR;
++		goto out;
++	}
++
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			hidden_file = ftohf(file);
++		}
++	}
++
++	if (!hidden_file->f_op || !hidden_file->f_op->read)
++		goto out;
++
++	err = hidden_file->f_op->read(hidden_file, buf, count, &pos);
++	*ppos = pos;
++
++	if (err >= 0) {
++		/* atime should also be updated for reads of size zero or more */
++		fist_copy_attr_atime(file->f_dentry->d_inode,
++				     hidden_file->f_dentry->d_inode);
++	}
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	/*
++	 * MAJOR HACK
++	 * because pread() does not have any way to tell us that it is
++	 * our caller, then we don't know for sure if we have to update
++	 * the file positions.  This hack relies on read() having passed us
++	 * the "real" pointer of its struct file's f_pos field.
++	 */
++	if (ppos == &file->f_pos)
++		hidden_file->f_pos = *ppos = pos;
++	if (hidden_file->f_reada) { /* update readahead information if needed */
++		file->f_reada = hidden_file->f_reada;
++		file->f_ramax = hidden_file->f_ramax;
++		file->f_raend = hidden_file->f_raend;
++		file->f_ralen = hidden_file->f_ralen;
++		file->f_rawin = hidden_file->f_rawin;
++	}
++#else
++	memcpy(&(file->f_ra),&(hidden_file->f_ra),sizeof(struct file_ra_state));
++#endif
++
++ out:
++	return err;
++}
++
++
++/* this mini_fo_write() does not modify data pages! */
++STATIC ssize_t
++mini_fo_write(file_t *file, const char *buf, size_t count, loff_t *ppos)
++{
++	int err = -EINVAL;
++	file_t *hidden_file = NULL;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	loff_t pos = *ppos;
++
++	/* mk: fan out: */
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			/* This is bad! We have no storage file to write to. This
++			 * should never happen because if a file is opened for
++			 * writing, a copy should have been made earlier.
++			 */
++			printk(KERN_CRIT "mini_fo: write : ERROR, no storage file to write.\n");
++			err = -EINVAL;
++			goto out;
++		}
++	}
++
++	inode = file->f_dentry->d_inode;
++	hidden_inode = itohi2(inode);
++	if(!hidden_inode) {
++		printk(KERN_CRIT "mini_fo: write: no sto inode found, not good.\n");
++		goto out;
++	}
++
++	if (!hidden_file->f_op || !hidden_file->f_op->write)
++		goto out;
++
++	/* adjust for append -- seek to the end of the file */
++	if (file->f_flags & O_APPEND)
++		pos = inode->i_size;
++
++	err = hidden_file->f_op->write(hidden_file, buf, count, &pos);
++
++	/*
++	 * copy ctime and mtime from lower layer attributes
++	 * atime is unchanged for both layers
++	 */
++	if (err >= 0)
++		fist_copy_attr_times(inode, hidden_inode);
++
++	*ppos = pos;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	/*
++	 * XXX: MAJOR HACK
++	 *
++	 * because pwrite() does not have any way to tell us that it is
++	 * our caller, then we don't know for sure if we have to update
++	 * the file positions.  This hack relies on write() having passed us
++	 * the "real" pointer of its struct file's f_pos field.
++	 */
++	if (ppos == &file->f_pos)
++		hidden_file->f_pos = *ppos = pos;
++#endif
++	/* update this inode's size */
++	if (pos > inode->i_size)
++		inode->i_size = pos;
++
++ out:
++	return err;
++}
++
++/* Global variable to hold a file_t pointer.
++ * This serves to allow mini_fo_filldir function to know which file is
++ * beeing read, which is required for two reasons:
++ *
++ *   - be able to call wol functions in order to avoid listing deleted
++ *     base files.
++ *   - if we're reading a directory which is in state 1, we need to
++ *     maintain a list (in mini_fo_filldir) of which files allready
++ *     have been copied to userspace,to detect files existing in base
++ *     and storage and not list them twice.
++ */
++filldir_t mini_fo_filldir_orig;
++file_t *mini_fo_filldir_file;
++
++/* mainly copied from fs/readdir.c */
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++mini_fo_filldir(void * __buf, const char * name, int namlen, loff_t offset,
++		  u64 ino, unsigned int d_type)
++#else
++mini_fo_filldir(void * __buf, const char * name, int namlen, loff_t offset,
++		  ino_t ino, unsigned int d_type)
++#endif
++{
++	struct getdents_callback * buf = (struct getdents_callback *) __buf;
++	file_t* file = mini_fo_filldir_file;
++
++	/* In theses states we filter meta files in storage (WOL) */
++	if(file && (dtopd(file->f_dentry)->state == MODIFIED ||
++		    dtopd(file->f_dentry)->state == CREATED ||
++		    dtopd(file->f_dentry)->state == DEL_REWRITTEN)) {
++
++		int tmp = strlen(META_FILENAME);
++		if(tmp  == namlen) {
++			if(!strncmp(name, META_FILENAME, namlen))
++				return 0;
++		}
++	}
++
++	/* check if we are merging the contents of storage and base */
++	if(file && dtopd(file->f_dentry)->state == MODIFIED) {
++		/* check if we are still reading storage contents, if
++		 * yes, we just save the name of the file for duplicate
++		 * checking later. */
++
++		if(!ftopd(file)->rd.sto_done) {
++			/* put file into ndl list */
++			if(ndl_add_entry(&ftopd(file)->rd, name, namlen))
++				printk(KERN_CRIT "mini_fo_filldir: Error adding to ndl.\n");
++		} else {
++			/* check if file has been deleted */
++			if(meta_check_d_entry(file->f_dentry, name, namlen))
++				return 0;
++
++			/* do duplicate checking */
++			if(ndl_check_entry(&ftopd(file)->rd, name, namlen))
++				return 0;
++		}
++	}
++
++	return mini_fo_filldir_orig(buf, name, namlen, offset, ino, d_type);
++}
++
++
++STATIC int
++mini_fo_readdir(file_t *file, void *dirent, filldir_t filldir)
++{
++	int err = 0;/* mk: ??? -ENOTDIR; */
++	file_t *hidden_file = NULL;
++	file_t *hidden_sto_file = NULL;
++	inode_t *inode;
++	struct getdents_callback *buf;
++	int oldcount;
++
++#if defined(FIST_FILTER_NAME) || defined(FIST_FILTER_SCA)
++	struct mini_fo_getdents_callback buf;
++#endif /* FIST_FILTER_NAME || FIST_FILTER_SCA */
++
++	buf = (struct getdents_callback *) dirent;
++	oldcount = buf->count;
++	inode = file->f_dentry->d_inode;
++	mini_fo_filldir_file = file;
++	mini_fo_filldir_orig = filldir;
++
++	ftopd(file)->rd.sto_done = 0;
++	do {
++		if (ftopd(file) != NULL) {
++			if(ftohf2(file)) {
++				hidden_sto_file = ftohf2(file);
++				err = vfs_readdir(hidden_sto_file, mini_fo_filldir, dirent);
++				file->f_pos = hidden_sto_file->f_pos;
++				if (err > 0)
++					fist_copy_attr_atime(inode, hidden_sto_file->f_dentry->d_inode);
++				/* not finshed yet, we'll be called again */
++				if (buf->count != oldcount)
++					break;
++			}
++
++			ftopd(file)->rd.sto_done = 1;
++
++			if(ftohf(file)) {
++				hidden_file = ftohf(file);
++				err = vfs_readdir(hidden_file, mini_fo_filldir, dirent);
++				file->f_pos = hidden_file->f_pos;
++				if (err > 0)
++					fist_copy_attr_atime(inode, hidden_file->f_dentry->d_inode);
++			}
++
++		}
++	} while (0);
++
++	/* mk:
++	 * we need to check if all the directory data has been copied to userspace,
++	 * or if we will be called again by userspace to complete the operation.
++	 */
++	if(buf->count == oldcount) {
++		ndl_put_list(&ftopd(file)->rd);
++	}
++
++	/* unset this, safe */
++	mini_fo_filldir_file = NULL;
++	return err;
++}
++
++
++STATIC unsigned int
++mini_fo_poll(file_t *file, poll_table *wait)
++{
++	unsigned int mask = DEFAULT_POLLMASK;
++	file_t *hidden_file = NULL;
++
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			hidden_file = ftohf(file);
++		}
++	}
++
++	if (!hidden_file->f_op || !hidden_file->f_op->poll)
++		goto out;
++
++	mask = hidden_file->f_op->poll(hidden_file, wait);
++
++ out:
++	return mask;
++}
++
++/* FIST-LITE special version of mmap */
++STATIC int
++mini_fo_mmap(file_t *file, vm_area_t *vma)
++{
++	int err = 0;
++	file_t *hidden_file = NULL;
++
++	/* fanout capability */
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			hidden_file = ftohf(file);
++		}
++	}
++
++	ASSERT(hidden_file != NULL);
++	ASSERT(hidden_file->f_op != NULL);
++	ASSERT(hidden_file->f_op->mmap != NULL);
++
++	vma->vm_file = hidden_file;
++	err = hidden_file->f_op->mmap(hidden_file, vma);
++	get_file(hidden_file); /* make sure it doesn't get freed on us */
++	fput(file);	       /* no need to keep extra ref on ours */
++
++	return err;
++}
++
++
++
++STATIC int
++mini_fo_open(inode_t *inode, file_t *file)
++{
++	int err = 0;
++ 	int hidden_flags;
++	file_t *hidden_file = NULL;
++	dentry_t *hidden_dentry = NULL;
++
++	/* fanout stuff */
++	file_t *hidden_sto_file = NULL;
++	dentry_t *hidden_sto_dentry = NULL;
++
++	__ftopd(file) =
++		kmalloc(sizeof(struct mini_fo_file_info), GFP_KERNEL);
++	if (!ftopd(file)) {
++		err = -ENOMEM;
++		goto out;
++	}
++
++	/* init the readdir_helper structure */
++	INIT_LIST_HEAD(&ftopd(file)->rd.ndl_list);
++	ftopd(file)->rd.ndl_size = 0;
++
++	/* In certain paths this could stay uninitalized and cause trouble */
++	ftohf(file) = NULL;
++	ftohf2(file) = NULL;
++	hidden_flags = file->f_flags;
++
++	/* create storage files? */
++	if(dtost(file->f_dentry) == UNMODIFIED) {
++		if(!IS_WRITE_FLAG(file->f_flags)) {
++			hidden_dentry = dtohd(file->f_dentry);
++			dget(hidden_dentry);
++			/* dentry_open will decrement mnt refcnt if err.
++			 * otherwise fput() will do an mntput() for us upon file close. */
++			mntget(stopd(inode->i_sb)->hidden_mnt);
++			hidden_file = dentry_open(hidden_dentry,
++						  stopd(inode->i_sb)->hidden_mnt,
++						  hidden_flags);
++			if (IS_ERR(hidden_file)) {
++				err = PTR_ERR(hidden_file);
++				dput(hidden_dentry);
++				goto out;
++			}
++			ftohf(file) = hidden_file;	/* link two files */
++			goto out;
++		}
++		else {
++			if(S_ISDIR(file->f_dentry->d_inode->i_mode)) {
++				err = dir_unmod_to_mod(file->f_dentry);
++			} else
++				err = nondir_unmod_to_mod(file->f_dentry, 1);
++
++			if (err) {
++				printk("mini_fo_open: ERROR creating storage file.\n");
++				goto out;
++			}
++		}
++	}
++	hidden_sto_dentry = dtohd2(file->f_dentry);
++	dget(hidden_sto_dentry);
++
++	if(dtopd(file->f_dentry)->state == MODIFIED) {
++		/* Directorys are special, interpose on both lower level files */
++		if(S_ISDIR(itohi(inode)->i_mode)) {
++			/* check for invalid file types of lower level files */
++			if(!(S_ISDIR(itohi(inode)->i_mode) && S_ISDIR(itohi2(inode)->i_mode))) {
++				printk(KERN_CRIT "mini_fo_open: meta data corruption detected.\n");
++				dput(hidden_sto_dentry);
++				err = -EINVAL;
++				goto out;
++			}
++
++			/* lower level directorys are ok, open the base file */
++			hidden_dentry = dtohd(file->f_dentry);
++			dget(hidden_dentry);
++
++			mntget(stopd(inode->i_sb)->hidden_mnt);
++			hidden_file = dentry_open(hidden_dentry,
++						  stopd(inode->i_sb)->hidden_mnt,
++						  hidden_flags);
++			if (IS_ERR(hidden_file)) {
++				err = PTR_ERR(hidden_file);
++				dput(hidden_dentry);
++				dput(hidden_sto_dentry);
++				goto out;
++			}
++			ftohf(file) = hidden_file; /* link the two files */
++		}
++	}
++
++	if(!exists_in_storage(file->f_dentry)) {
++		printk(KERN_CRIT "mini_fo_open: invalid file state detected.\n");
++		err = -EINVAL;
++		dput(hidden_sto_dentry);
++
++		/* If the base file has been opened, we need to close it here */
++		if(ftohf(file)) {
++			if (hidden_file->f_op && hidden_file->f_op->flush)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++				hidden_file->f_op->flush(hidden_file, NULL);
++#else
++				hidden_file->f_op->flush(hidden_file);
++#endif
++			dput(hidden_dentry);
++		}
++		goto out;
++	}
++
++	/* ok, now we can safely open the storage file */
++	mntget(stopd(inode->i_sb)->hidden_mnt2);
++	hidden_sto_file = dentry_open(hidden_sto_dentry,
++				      stopd(inode->i_sb)->hidden_mnt2,
++				      hidden_flags);
++
++	/* dentry_open dputs the dentry if it fails */
++	if (IS_ERR(hidden_sto_file)) {
++		err = PTR_ERR(hidden_sto_file);
++		/* close base file if open */
++		if(ftohf(file)) {
++			if (hidden_file->f_op && hidden_file->f_op->flush)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++				hidden_file->f_op->flush(hidden_file, NULL);
++#else
++				hidden_file->f_op->flush(hidden_file);
++#endif
++			dput(hidden_dentry);
++		}
++		goto out;
++	}
++	ftohf2(file) = hidden_sto_file; /* link storage file */
++
++ out:
++	if (err < 0 && ftopd(file)) {
++		kfree(ftopd(file));
++	}
++	return err;
++}
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++mini_fo_flush(file_t *file, fl_owner_t id)
++#else
++mini_fo_flush(file_t *file)
++#endif
++{
++	int err1 = 0;		/* assume ok (see open.c:close_fp) */
++	int err2 = 0;
++	file_t *hidden_file = NULL;
++
++	check_mini_fo_file(file);
++
++	/* mk: we don't do any state checking here, as its not worth the time.
++	 * Just flush the lower level files if they exist.
++	 */
++	if(ftopd(file) != NULL) {
++		if(ftohf(file) != NULL) {
++			hidden_file = ftohf(file);
++			if (hidden_file->f_op && hidden_file->f_op->flush)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++				err1 = hidden_file->f_op->flush(hidden_file, id);
++#else
++				err1 = hidden_file->f_op->flush(hidden_file);
++#endif
++		}
++		if(ftohf2(file) != NULL) {
++			hidden_file = ftohf2(file);
++			if (hidden_file->f_op && hidden_file->f_op->flush)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++				err2 = hidden_file->f_op->flush(hidden_file, id);
++#else
++				err2 = hidden_file->f_op->flush(hidden_file);
++#endif
++		}
++	}
++	return (err1 | err2);
++}
++
++
++STATIC int
++mini_fo_release(inode_t *inode, file_t *file)
++{
++	int err = 0;
++	file_t *hidden_file = NULL;
++
++	if (ftopd(file) != NULL) {
++		if(ftohf(file)) {
++			hidden_file = ftohf(file);
++			fput(hidden_file);
++		}
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++			fput(hidden_file);
++		}
++		kfree(ftopd(file));
++	}
++	return err;
++}
++
++STATIC int
++mini_fo_fsync(file_t *file, dentry_t *dentry, int datasync)
++{
++	int err1 = 0;
++	int err2 = 0;
++	file_t *hidden_file = NULL;
++	dentry_t *hidden_dentry;
++
++	check_mini_fo_file(file);
++
++	if ((hidden_file = ftohf(file)) != NULL) {
++		hidden_dentry = dtohd(dentry);
++		if (hidden_file->f_op && hidden_file->f_op->fsync) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++			mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++			down(&hidden_dentry->d_inode->i_sem);
++#endif
++			err1 = hidden_file->f_op->fsync(hidden_file, hidden_dentry, datasync);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++			mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++			up(&hidden_dentry->d_inode->i_sem);
++#endif
++		}
++	}
++
++	if ((hidden_file = ftohf2(file)) != NULL) {
++		hidden_dentry = dtohd2(dentry);
++		if (hidden_file->f_op && hidden_file->f_op->fsync) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++			mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++			down(&hidden_dentry->d_inode->i_sem);
++#endif
++			err2 = hidden_file->f_op->fsync(hidden_file, hidden_dentry, datasync);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++			mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++			up(&hidden_dentry->d_inode->i_sem);
++#endif
++		}
++	}
++	else
++		goto err;
++
++err:
++	return (err1 || err2);
++}
++
++
++STATIC int
++mini_fo_fasync(int fd, file_t *file, int flag)
++{
++	int err1 = 0;
++	int err2 = 0;
++
++	file_t *hidden_file = NULL;
++
++	check_mini_fo_file(file);
++
++	if((hidden_file = ftohf(file)) != NULL) {
++		err1 = hidden_file->f_op->fasync(fd, hidden_file, flag);
++	}
++	if((hidden_file = ftohf2(file)) != NULL) {
++		err2 = hidden_file->f_op->fasync(fd, hidden_file, flag);
++	}
++
++	return (err1 || err2);
++}
++
++
++
++struct file_operations mini_fo_dir_fops =
++	{
++		read:	generic_read_dir,
++		write:	mini_fo_write,
++		readdir: mini_fo_readdir,
++		poll:	mini_fo_poll,
++		/* ioctl:	mini_fo_ioctl, */
++		mmap:	mini_fo_mmap,
++		open:	mini_fo_open,
++		flush:	mini_fo_flush,
++		release: mini_fo_release,
++		fsync:	mini_fo_fsync,
++		fasync:	mini_fo_fasync,
++		/* not needed lock:	mini_fo_lock, */
++		/* not needed: readv */
++		/* not needed: writev */
++		/* not implemented: sendpage */
++		/* not implemented: get_unmapped_area */
++	};
++
++struct file_operations mini_fo_main_fops =
++	{
++		llseek:	mini_fo_llseek,
++		read:	mini_fo_read,
++		write:	mini_fo_write,
++		readdir: mini_fo_readdir,
++		poll:	mini_fo_poll,
++		/* ioctl:	mini_fo_ioctl, */
++		mmap:	mini_fo_mmap,
++		open:	mini_fo_open,
++		flush:	mini_fo_flush,
++		release: mini_fo_release,
++		fsync:	mini_fo_fsync,
++		fasync:	mini_fo_fasync,
++		/* not needed: lock:	mini_fo_lock, */
++		/* not needed: readv */
++		/* not needed: writev */
++		/* not implemented: sendpage */
++		/* not implemented: get_unmapped_area */
++	};
+--- /dev/null
++++ b/fs/mini_fo/fist.h
+@@ -0,0 +1,252 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++
++/*
++ *  $Id$
++ */
++
++#ifndef __FIST_H_
++#define __FIST_H_
++
++/*
++ * KERNEL ONLY CODE:
++ */
++#ifdef __KERNEL__
++#include <linux/version.h>
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19)
++#include <linux/autoconf.h>
++#else
++#include <linux/config.h>
++#endif
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++#ifdef CONFIG_MODVERSIONS
++# define MODVERSIONS
++# include <linux/modversions.h>
++#endif /* CONFIG_MODVERSIONS */
++#endif /* KERNEL_VERSION < 2.6.0 */
++#include <linux/sched.h>
++#include <linux/kernel.h>
++#include <linux/mm.h>
++#include <linux/string.h>
++#include <linux/stat.h>
++#include <linux/errno.h>
++#include <linux/wait.h>
++#include <linux/limits.h>
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++#include <linux/locks.h>
++#else
++#include <linux/buffer_head.h>
++#include <linux/pagemap.h>
++#include <linux/namei.h>
++#include <linux/module.h>
++#include <linux/mount.h>
++#include <linux/page-flags.h>
++#include <linux/writeback.h>
++#include <linux/statfs.h>
++#endif
++#include <linux/smp.h>
++#include <linux/smp_lock.h>
++#include <linux/file.h>
++#include <linux/slab.h>
++#include <linux/vmalloc.h>
++#include <linux/poll.h>
++#include <linux/list.h>
++#include <linux/init.h>
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20)
++#include <linux/xattr.h>
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#include <linux/security.h>
++#endif
++
++#include <linux/swap.h>
++
++#include <asm/system.h>
++/* #include <asm/segment.h> */
++#include <asm/mman.h>
++#include <linux/seq_file.h>
++
++/*
++ * MACROS:
++ */
++
++/* those mapped to ATTR_* were copied from linux/fs.h */
++#define FA_MODE		ATTR_MODE
++#define FA_UID		ATTR_UID
++#define FA_GID		ATTR_GID
++#define FA_SIZE		ATTR_SIZE
++#define FA_ATIME	ATTR_ATIME
++#define FA_MTIME	ATTR_MTIME
++#define FA_CTIME	ATTR_CTIME
++#define FA_ATIME_SET	ATTR_ATIME_SET
++#define FA_MTIME_SET	ATTR_MTIME_SET
++#define FA_FORCE	ATTR_FORCE
++#define FA_ATTR_FLAGS	ATTR_ATTR_FLAG
++
++/* must be greater than all other ATTR_* flags! */
++#define FA_NLINK	2048
++#define FA_BLKSIZE	4096
++#define FA_BLOCKS	8192
++#define FA_TIMES	(FA_ATIME|FA_MTIME|FA_CTIME)
++#define FA_ALL		0
++
++/* macros to manage changes between kernels */
++#define INODE_DATA(i)	(&(i)->i_data)
++
++#define MIN(x,y) ((x < y) ? (x) : (y))
++#define MAX(x,y) ((x > y) ? (x) : (y))
++#define MAXPATHLEN PATH_MAX
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,5)
++# define lookup_one_len(a,b,c) lookup_one(a,b)
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,4,5) */
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,8)
++# define generic_file_llseek default_llseek
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,4,8) */
++
++#ifndef SEEK_SET
++# define SEEK_SET 0
++#endif /* not SEEK_SET */
++
++#ifndef SEEK_CUR
++# define SEEK_CUR 1
++#endif /* not SEEK_CUR */
++
++#ifndef SEEK_END
++# define SEEK_END 2
++#endif /* not SEEK_END */
++
++#ifndef DEFAULT_POLLMASK
++# define DEFAULT_POLLMASK (POLLIN | POLLOUT | POLLRDNORM | POLLWRNORM)
++#endif /* not DEFAULT_POLLMASK */
++
++/* XXX: fix this so fistgen generates kfree() code directly */
++#define kfree_s(a,b) kfree(a)
++
++/*
++ * TYPEDEFS:
++ */
++typedef struct dentry dentry_t;
++typedef struct file file_t;
++typedef struct inode inode_t;
++typedef inode_t vnode_t;
++typedef struct page page_t;
++typedef struct qstr qstr_t;
++typedef struct super_block super_block_t;
++typedef super_block_t vfs_t;
++typedef struct vm_area_struct vm_area_t;
++
++
++/*
++ * EXTERNALS:
++ */
++
++#define FPPF(str,page) printk("PPF %s 0x%x/%d: Lck:%d Err:%d Ref:%d Upd:%d Other::%d:%d:%d:%d:\n", \
++		str, \
++		(int) page, \
++		(int) page->index, \
++		(PageLocked(page) ? 1 : 0), \
++		(PageError(page) ? 1 : 0), \
++		(PageReferenced(page) ? 1 : 0), \
++		(Page_Uptodate(page) ? 1 : 0), \
++		(PageDecrAfter(page) ? 1 : 0), \
++		(PageSlab(page) ? 1 : 0), \
++		(PageSwapCache(page) ? 1 : 0), \
++		(PageReserved(page) ? 1 : 0) \
++		)
++#define EZKDBG printk("EZK %s:%d:%s\n",__FILE__,__LINE__,__FUNCTION__)
++#if 0
++# define EZKDBG1 printk("EZK %s:%d\n",__FILE__,__LINE__)
++#else
++# define EZKDBG1
++#endif
++
++extern int fist_get_debug_value(void);
++extern int fist_set_debug_value(int val);
++#if 0 /* mini_fo doesn't need these */
++extern void fist_dprint_internal(int level, char *str,...);
++extern void fist_print_dentry(char *str, const dentry_t *dentry);
++extern void fist_print_inode(char *str, const inode_t *inode);
++extern void fist_print_file(char *str, const file_t *file);
++extern void fist_print_buffer_flags(char *str, struct buffer_head *buffer);
++extern void fist_print_page_flags(char *str, page_t *page);
++extern void fist_print_page_bytes(char *str, page_t *page);
++extern void fist_print_pte_flags(char *str, const page_t *page);
++extern void fist_checkinode(inode_t *inode, char *msg);
++extern void fist_print_sb(char *str, const super_block_t *sb);
++
++/* §$% by mk: special debug functions */
++extern void fist_mk_print_dentry(char *str, const dentry_t *dentry);
++extern void fist_mk_print_inode(char *str, const inode_t *inode);
++
++extern char *add_indent(void);
++extern char *del_indent(void);
++#endif/* mini_fo doesn't need these */
++
++
++#define STATIC
++#define ASSERT(EX)	\
++do {	\
++    if (!(EX)) {	\
++	printk(KERN_CRIT "ASSERTION FAILED: %s at %s:%d (%s)\n", #EX,	\
++	       __FILE__, __LINE__, __FUNCTION__);	\
++	(*((char *)0))=0;	\
++    }	\
++} while (0)
++/* same ASSERT, but tell me who was the caller of the function */
++#define ASSERT2(EX)	\
++do {	\
++    if (!(EX)) {	\
++	printk(KERN_CRIT "ASSERTION FAILED (caller): %s at %s:%d (%s)\n", #EX,	\
++	       file, line, func);	\
++	(*((char *)0))=0;	\
++    }	\
++} while (0)
++
++#if 0 /* mini_fo doesn't need these */
++#define dprintk(format, args...) printk(KERN_DEBUG format, ##args)
++#define fist_dprint(level, str, args...) fist_dprint_internal(level, KERN_DEBUG str, ## args)
++#define print_entry_location() fist_dprint(4, "%sIN:  %s %s:%d\n", add_indent(), __FUNCTION__, __FILE__, __LINE__)
++#define print_exit_location() fist_dprint(4, "%s OUT: %s %s:%d\n", del_indent(), __FUNCTION__, __FILE__, __LINE__)
++#define print_exit_status(status) fist_dprint(4, "%s OUT: %s %s:%d, STATUS: %d\n", del_indent(), __FUNCTION__, __FILE__, __LINE__, status)
++#define print_exit_pointer(status) \
++do { \
++  if (IS_ERR(status)) \
++    fist_dprint(4, "%s OUT: %s %s:%d, RESULT: %ld\n", del_indent(), __FUNCTION__, __FILE__, __LINE__, PTR_ERR(status)); \
++  else \
++    fist_dprint(4, "%s OUT: %s %s:%d, RESULT: 0x%x\n", del_indent(), __FUNCTION__, __FILE__, __LINE__, PTR_ERR(status)); \
++} while (0)
++#endif/* mini_fo doesn't need these */
++
++#endif /* __KERNEL__ */
++
++
++/*
++ * DEFINITIONS FOR USER AND KERNEL CODE:
++ * (Note: ioctl numbers 1--9 are reserved for fistgen, the rest
++ *  are auto-generated automatically based on the user's .fist file.)
++ */
++# define FIST_IOCTL_GET_DEBUG_VALUE	_IOR(0x15, 1, int)
++# define FIST_IOCTL_SET_DEBUG_VALUE	_IOW(0x15, 2, int)
++
++#endif /* not __FIST_H_ */
+--- /dev/null
++++ b/fs/mini_fo/inode.c
+@@ -0,0 +1,1564 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_create(inode_t *dir, dentry_t *dentry, int mode, struct nameidata *nd)
++#else
++mini_fo_create(inode_t *dir, dentry_t *dentry, int mode)
++#endif
++{
++	int err = 0;
++
++	check_mini_fo_dentry(dentry);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	err = create_sto_reg_file(dentry, mode, nd);
++#else
++	err = create_sto_reg_file(dentry, mode);
++#endif
++	check_mini_fo_dentry(dentry);
++	return err;
++}
++
++
++STATIC dentry_t *
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_lookup(inode_t *dir, dentry_t *dentry, struct nameidata* nd)
++#else
++mini_fo_lookup(inode_t *dir, dentry_t *dentry)
++#endif
++{
++	int err = 0;
++	dentry_t *hidden_dir_dentry;
++	dentry_t *hidden_dentry = NULL;
++
++	dentry_t *hidden_sto_dir_dentry;
++	dentry_t *hidden_sto_dentry = NULL;
++
++	/* whiteout flag */
++	int del_flag = 0;
++	char *bpath = NULL;
++
++	const char *name;
++	unsigned int namelen;
++
++	/* Don't allow lookups of META-files */
++	namelen = strlen(META_FILENAME);
++	if(namelen == dentry->d_name.len) {
++		if(!strncmp(dentry->d_name.name, META_FILENAME, namelen)) {
++			err = -ENOENT;
++			goto out;
++		}
++	}
++
++	hidden_dir_dentry = dtohd(dentry->d_parent);
++	hidden_sto_dir_dentry = dtohd2(dentry->d_parent);
++
++	name = dentry->d_name.name;
++	namelen = dentry->d_name.len;
++
++	/* must initialize dentry operations */
++	dentry->d_op = &mini_fo_dops;
++
++	/* setup the del_flag */
++	del_flag = __meta_check_d_entry(dir, name, namelen);
++	bpath = __meta_check_r_entry(dir, name, namelen);
++
++	/* perform the lookups of base and storage files:
++	 *
++	 * This caused some serious trouble, as a lookup_one_len passing
++	 * a negative dentry oopses. Solution is to only do the lookup
++	 * if the dentry is positive, else we set it to NULL
++	 * More trouble, who said a *_dir_dentry can't be NULL?
++	 */
++	if(bpath) {
++		/* Cross-Interposing (C), yeah! */
++		hidden_dentry = bpath_walk(dir->i_sb, bpath);
++		if(!hidden_dentry || !hidden_dentry->d_inode) {
++			printk(KERN_CRIT "mini_fo_lookup: bpath_walk failed.\n");
++			err= -EINVAL;
++			goto out;
++		}
++
++		/* this can be set up safely without fear of spaghetti
++		 * interposing as it is only used for copying times */
++		hidden_dir_dentry = hidden_dentry->d_parent;
++		kfree(bpath);
++	}
++	else if(hidden_dir_dentry && hidden_dir_dentry->d_inode)
++		hidden_dentry =
++			lookup_one_len(name, hidden_dir_dentry, namelen);
++	else
++		hidden_dentry = NULL;
++
++	if(hidden_sto_dir_dentry && hidden_sto_dir_dentry->d_inode)
++		hidden_sto_dentry =
++			lookup_one_len(name, hidden_sto_dir_dentry, namelen);
++	else
++		hidden_sto_dentry =  NULL;
++
++	/* catch error in lookup */
++	if (IS_ERR(hidden_dentry) || IS_ERR(hidden_sto_dentry)) {
++		/* mk: we need to call dput on the dentry, whose
++		 * lookup_one_len operation failed, in order to avoid
++		 * unmount trouble.
++		 */
++		if(IS_ERR(hidden_dentry)) {
++			printk(KERN_CRIT "mini_fo_lookup: ERR from base dentry, lookup failed.\n");
++			err = PTR_ERR(hidden_dentry);
++		} else {
++			dput(hidden_dentry);
++		}
++		if(IS_ERR(hidden_sto_dentry)) {
++			printk(KERN_CRIT "mini_fo_lookup: ERR from storage dentry, lookup failed.\n");
++			err = PTR_ERR(hidden_sto_dentry);
++		} else {
++			dput(hidden_sto_dentry);
++		}
++		goto out;
++	}
++
++	/* allocate dentry private data */
++	__dtopd(dentry) = (struct mini_fo_dentry_info *)
++		kmalloc(sizeof(struct mini_fo_dentry_info), GFP_KERNEL);
++
++	if (!dtopd(dentry)) {
++		err = -ENOMEM;
++		goto out_dput;
++	}
++
++	/* check for different states of the mini_fo file to be looked up. */
++
++	/* state 1, file has been modified */
++	if(hidden_dentry && hidden_sto_dentry &&
++	   hidden_dentry->d_inode && hidden_sto_dentry->d_inode && !del_flag) {
++
++		/* update parent directory's atime */
++		fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode);
++
++		dtopd(dentry)->state = MODIFIED;
++		dtohd(dentry) = hidden_dentry;
++		dtohd2(dentry) = hidden_sto_dentry;
++
++		err = mini_fo_tri_interpose(hidden_dentry,
++					    hidden_sto_dentry,
++					    dentry, dir->i_sb, 1);
++		if (err) {
++			printk(KERN_CRIT "mini_fo_lookup: error interposing (state1).\n");
++			goto out_free;
++		}
++		goto out;
++	}
++	/* state 2, file is unmodified */
++	if(hidden_dentry && hidden_dentry->d_inode && !del_flag) {
++
++		fist_copy_attr_atime(dir, hidden_dir_dentry->d_inode);
++
++		dtopd(dentry)->state = UNMODIFIED;
++		dtohd(dentry) = hidden_dentry;
++		dtohd2(dentry) = hidden_sto_dentry; /* could be negative */
++
++		err = mini_fo_tri_interpose(hidden_dentry,
++					    hidden_sto_dentry,
++					    dentry, dir->i_sb, 1);
++		if (err) {
++			printk(KERN_CRIT "mini_fo_lookup: error interposing (state2).\n");
++			goto out_free;
++		}
++		goto out;
++	}
++	/* state 3, file has been newly created */
++	if(hidden_sto_dentry && hidden_sto_dentry->d_inode && !del_flag) {
++
++		fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode);
++		dtopd(dentry)->state = CREATED;
++		dtohd(dentry) = hidden_dentry; /* could be negative */
++		dtohd2(dentry) = hidden_sto_dentry;
++
++		err = mini_fo_tri_interpose(hidden_dentry,
++					    hidden_sto_dentry,
++					    dentry, dir->i_sb, 1);
++		if (err) {
++			printk(KERN_CRIT "mini_fo_lookup: error interposing (state3).\n");
++			goto out_free;
++		}
++		goto out;
++	}
++
++	/* state 4, file has deleted and created again. */
++	if(hidden_dentry && hidden_sto_dentry &&
++	   hidden_dentry->d_inode &&
++	   hidden_sto_dentry->d_inode && del_flag) {
++
++		fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode);
++		dtopd(dentry)->state = DEL_REWRITTEN;
++		dtohd(dentry) = NULL;
++		dtohd2(dentry) = hidden_sto_dentry;
++
++		err = mini_fo_tri_interpose(NULL,
++					    hidden_sto_dentry,
++					    dentry, dir->i_sb, 1);
++		if (err) {
++			printk(KERN_CRIT "mini_fo_lookup: error interposing (state4).\n");
++			goto out_free;
++		}
++		/* We will never need this dentry again, as the file has been
++		 * deleted from base */
++		dput(hidden_dentry);
++		goto out;
++	}
++	/* state 5, file has been deleted in base */
++	if(hidden_dentry && hidden_sto_dentry &&
++	   hidden_dentry->d_inode &&
++	   !hidden_sto_dentry->d_inode && del_flag) {
++
++		/* check which parents atime we need for updating */
++		if(hidden_sto_dir_dentry->d_inode)
++			fist_copy_attr_atime(dir,
++					     hidden_sto_dir_dentry->d_inode);
++		else
++			fist_copy_attr_atime(dir,
++					     hidden_dir_dentry->d_inode);
++
++		dtopd(dentry)->state = DELETED;
++		dtohd(dentry) = NULL;
++		dtohd2(dentry) = hidden_sto_dentry;
++
++		/* add negative dentry to dcache to speed up lookups */
++		d_add(dentry, NULL);
++		dput(hidden_dentry);
++		goto out;
++	}
++	/* state 6, file does not exist */
++	if(((hidden_dentry && !hidden_dentry->d_inode) ||
++	    (hidden_sto_dentry && !hidden_sto_dentry->d_inode)) && !del_flag)
++		{
++			/* check which parents atime we need for updating */
++			if(hidden_sto_dir_dentry && hidden_sto_dir_dentry->d_inode)
++				fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode);
++			else
++				fist_copy_attr_atime(dir, hidden_dir_dentry->d_inode);
++
++			dtopd(dentry)->state = NON_EXISTANT;
++			dtohd(dentry) = hidden_dentry;
++			dtohd2(dentry) = hidden_sto_dentry;
++			d_add(dentry, NULL);
++			goto out;
++		}
++
++	/* if we get to here, were in an invalid state. bad. */
++	printk(KERN_CRIT "mini_fo_lookup: ERROR, meta data corruption detected.\n");
++
++	/* end state checking */
++ out_free:
++	d_drop(dentry);		/* so that our bad dentry will get destroyed */
++	kfree(dtopd(dentry));
++	__dtopd(dentry) = NULL;	/* be safe */
++
++ out_dput:
++	if(hidden_dentry)
++		dput(hidden_dentry);
++	if(hidden_sto_dentry)
++		dput(hidden_sto_dentry); /* drops usage count and marks for release */
++
++ out:
++	/* initalize wol if file exists and is directory */
++	if(dentry->d_inode) {
++		if(S_ISDIR(dentry->d_inode->i_mode)) {
++			itopd(dentry->d_inode)->deleted_list_size = -1;
++			itopd(dentry->d_inode)->renamed_list_size = -1;
++			meta_build_lists(dentry);
++		}
++	}
++	return ERR_PTR(err);
++}
++
++
++STATIC int
++mini_fo_link(dentry_t *old_dentry, inode_t *dir, dentry_t *new_dentry)
++{
++	int err;
++	dentry_t *hidden_old_dentry;
++	dentry_t *hidden_new_dentry;
++	dentry_t *hidden_dir_dentry;
++
++
++	check_mini_fo_dentry(old_dentry);
++	check_mini_fo_dentry(new_dentry);
++	check_mini_fo_inode(dir);
++
++	/* no links to directorys and existing targets target allowed */
++	if(S_ISDIR(old_dentry->d_inode->i_mode) ||
++	   is_mini_fo_existant(new_dentry)) {
++		err = -EPERM;
++		goto out;
++	}
++
++	/* bring it directly from unmod to del_rew */
++	if(dtost(old_dentry) == UNMODIFIED) {
++		err = nondir_unmod_to_mod(old_dentry, 1);
++		if(err) {
++			err = -EINVAL;
++			goto out;
++		}
++		err = meta_add_d_entry(old_dentry->d_parent,
++				       old_dentry->d_name.name,
++				       old_dentry->d_name.len);
++		if(err) {
++			err = -EINVAL;
++			goto out;
++		}
++		dput(dtohd(old_dentry));
++		dtohd(old_dentry) = NULL;
++		dtost(old_dentry) = DEL_REWRITTEN;
++	}
++
++	err = get_neg_sto_dentry(new_dentry);
++	if(err) {
++		err = -EINVAL;
++		goto out;
++	}
++
++	hidden_old_dentry = dtohd2(old_dentry);
++	hidden_new_dentry = dtohd2(new_dentry);
++
++	dget(hidden_old_dentry);
++	dget(hidden_new_dentry);
++
++	/* was: hidden_dir_dentry = lock_parent(hidden_new_dentry); */
++	hidden_dir_dentry = dget(hidden_new_dentry->d_parent);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = vfs_link(hidden_old_dentry,
++		       hidden_dir_dentry->d_inode,
++		       hidden_new_dentry);
++	if (err || !hidden_new_dentry->d_inode)
++		goto out_lock;
++
++	dtost(new_dentry) = CREATED;
++ 	err = mini_fo_tri_interpose(NULL, hidden_new_dentry, new_dentry, dir->i_sb, 0);
++	if (err)
++		goto out_lock;
++
++	fist_copy_attr_timesizes(dir, hidden_new_dentry->d_inode);
++	/* propagate number of hard-links */
++	old_dentry->d_inode->i_nlink = itohi2(old_dentry->d_inode)->i_nlink;
++
++ out_lock:
++	/* was: unlock_dir(hidden_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_dir_dentry);
++
++	dput(hidden_new_dentry);
++	dput(hidden_old_dentry);
++	if (!new_dentry->d_inode)
++		d_drop(new_dentry);
++
++ out:
++	return err;
++}
++
++
++STATIC int
++mini_fo_unlink(inode_t *dir, dentry_t *dentry)
++{
++	int err = 0;
++
++	dget(dentry);
++	if(dtopd(dentry)->state == MODIFIED) {
++		err = nondir_mod_to_del(dentry);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == UNMODIFIED) {
++		err = nondir_unmod_to_del(dentry);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == CREATED) {
++		err = nondir_creat_to_del(dentry);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == DEL_REWRITTEN) {
++		err = nondir_del_rew_to_del(dentry);
++		goto out;
++	}
++
++	printk(KERN_CRIT "mini_fo_unlink: ERROR, invalid state detected.\n");
++
++ out:
++	fist_copy_attr_times(dir, itohi2(dentry->d_parent->d_inode));
++
++	if(!err) {
++		/* is this causing my pain? d_delete(dentry); */
++		d_drop(dentry);
++	}
++
++	dput(dentry);
++	return err;
++}
++
++
++STATIC int
++mini_fo_symlink(inode_t *dir, dentry_t *dentry, const char *symname)
++{
++	int err=0;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++        umode_t mode;
++#endif
++
++	/* Fail if the symlink file exists */
++	if(!(dtost(dentry) == DELETED ||
++	     dtost(dentry) == NON_EXISTANT)) {
++		err = -EEXIST;
++		goto out;
++	}
++
++	err = get_neg_sto_dentry(dentry);
++	if(err) {
++		err = -EINVAL;
++		goto out;
++	}
++	hidden_sto_dentry = dtohd2(dentry);
++
++	dget(hidden_sto_dentry);
++	/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	mode = S_IALLUGO;
++	err = vfs_symlink(hidden_sto_dir_dentry->d_inode,
++			  hidden_sto_dentry, symname, mode);
++#else
++	err = vfs_symlink(hidden_sto_dir_dentry->d_inode,
++			  hidden_sto_dentry,
++			  symname);
++#endif
++	if (err || !hidden_sto_dentry->d_inode)
++                goto out_lock;
++
++        if(dtost(dentry) == DELETED) {
++                dtost(dentry) = DEL_REWRITTEN;
++                err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0);
++                if(err)
++                        goto out_lock;
++        } else if(dtost(dentry) == NON_EXISTANT) {
++                dtost(dentry) = CREATED;
++                err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0);
++                if(err)
++                        goto out_lock;
++        }
++	fist_copy_attr_timesizes(dir, hidden_sto_dir_dentry->d_inode);
++
++ out_lock:
++        /* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++
++        dput(hidden_sto_dentry);
++        if (!dentry->d_inode)
++                d_drop(dentry);
++ out:
++        return err;
++}
++
++STATIC int
++mini_fo_mkdir(inode_t *dir, dentry_t *dentry, int mode)
++{
++	int err;
++
++	err = create_sto_dir(dentry, mode);
++
++	check_mini_fo_dentry(dentry);
++
++	return err;
++}
++
++
++STATIC int
++mini_fo_rmdir(inode_t *dir, dentry_t *dentry)
++{
++	int err = 0;
++
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++	dentry_t *meta_dentry;
++	inode_t *hidden_sto_dir = NULL;
++
++	check_mini_fo_dentry(dentry);
++	check_mini_fo_inode(dir);
++
++	dget(dentry);
++	if(dtopd(dentry)->state == MODIFIED) {
++		/* XXX: disabled, because it does not bother to check files on
++		 * the original filesystem - just a hack, but better than simply
++		 * removing it without testing */
++		err = -EINVAL;
++		goto out;
++
++		hidden_sto_dir = itohi2(dir);
++		hidden_sto_dentry = dtohd2(dentry);
++
++		/* was:hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++		hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++		/* Delete an old WOL file contained in the storage dir */
++		meta_dentry = lookup_one_len(META_FILENAME,
++					     hidden_sto_dentry,
++					     strlen(META_FILENAME));
++		if(meta_dentry->d_inode) {
++			err = vfs_unlink(hidden_sto_dentry->d_inode, meta_dentry);
++			dput(meta_dentry);
++			if(!err)
++				d_delete(meta_dentry);
++		}
++
++		err = vfs_rmdir(hidden_sto_dir, hidden_sto_dentry);
++		dput(hidden_sto_dentry);
++		if(!err)
++			d_delete(hidden_sto_dentry);
++
++		/* propagate number of hard-links */
++		dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++
++		dput(dtohd(dentry));
++
++		dtohd(dentry) = NULL;
++		dtopd(dentry)->state = DELETED;
++
++		/* carefull with R files */
++		if( __meta_is_r_entry(dir,
++				      dentry->d_name.name,
++				      dentry->d_name.len) == 1) {
++			err = meta_remove_r_entry(dentry->d_parent,
++						  dentry->d_name.name,
++						  dentry->d_name.len);
++			if(err) {
++				printk(KERN_CRIT "mini_fo: rmdir: meta_remove_r_entry failed.\n");
++				goto out;
++			}
++		}
++		else {
++			/* ok, add deleted file to META */
++			meta_add_d_entry(dentry->d_parent,
++					 dentry->d_name.name,
++					 dentry->d_name.len);
++		}
++		/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++		dput(hidden_sto_dir_dentry);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == UNMODIFIED) {
++		/* XXX: simply adding it to the delete list here is fscking dangerous!
++		 * as a temporary hack, i will disable rmdir on unmodified directories
++		 * for now.
++		 */
++		err = -EINVAL;
++		goto out;
++
++		err = get_neg_sto_dentry(dentry);
++		if(err) {
++			err = -EINVAL;
++			goto out;
++		}
++
++		/* dput base dentry, this will relase the inode and free the
++		 * dentry, as we will never need it again. */
++		dput(dtohd(dentry));
++		dtohd(dentry) = NULL;
++		dtopd(dentry)->state = DELETED;
++
++		/* add deleted file to META-file */
++		meta_add_d_entry(dentry->d_parent,
++				 dentry->d_name.name,
++				 dentry->d_name.len);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == CREATED) {
++		hidden_sto_dir = itohi2(dir);
++		hidden_sto_dentry = dtohd2(dentry);
++
++		/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry);*/
++		hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++		/* Delete an old WOL file contained in the storage dir */
++		meta_dentry = lookup_one_len(META_FILENAME,
++					     hidden_sto_dentry,
++					     strlen(META_FILENAME));
++		if(meta_dentry->d_inode) {
++			/* is this necessary? dget(meta_dentry); */
++			err = vfs_unlink(hidden_sto_dentry->d_inode,
++					 meta_dentry);
++			dput(meta_dentry);
++			if(!err)
++				d_delete(meta_dentry);
++		}
++
++		err = vfs_rmdir(hidden_sto_dir, hidden_sto_dentry);
++		dput(hidden_sto_dentry);
++		if(!err)
++			d_delete(hidden_sto_dentry);
++
++		/* propagate number of hard-links */
++		dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++		dtopd(dentry)->state = NON_EXISTANT;
++
++		/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++		dput(hidden_sto_dir_dentry);
++
++		goto out;
++	}
++	else if(dtopd(dentry)->state == DEL_REWRITTEN) {
++		hidden_sto_dir = itohi2(dir);
++		hidden_sto_dentry = dtohd2(dentry);
++
++		/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry);*/
++		hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++		/* Delete an old WOL file contained in the storage dir */
++		meta_dentry = lookup_one_len(META_FILENAME,
++					     hidden_sto_dentry,
++					     strlen(META_FILENAME));
++		if(meta_dentry->d_inode) {
++			/* is this necessary? dget(meta_dentry); */
++			err = vfs_unlink(hidden_sto_dentry->d_inode,
++					 meta_dentry);
++			dput(meta_dentry);
++			if(!err)
++				d_delete(meta_dentry);
++		}
++
++		err = vfs_rmdir(hidden_sto_dir, hidden_sto_dentry);
++		dput(hidden_sto_dentry);
++		if(!err)
++			d_delete(hidden_sto_dentry);
++
++		/* propagate number of hard-links */
++		dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++		dtopd(dentry)->state = DELETED;
++		/* was: unlock_dir(hidden_sto_dir_dentry); */
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++		dput(hidden_sto_dir_dentry);
++		goto out;
++	}
++
++	printk(KERN_CRIT "mini_fo_rmdir: ERROR, invalid state detected.\n");
++
++ out:
++	if(!err) {
++		d_drop(dentry);
++	}
++
++	fist_copy_attr_times(dir, itohi2(dentry->d_parent->d_inode));
++	dput(dentry);
++
++	return err;
++}
++
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_mknod(inode_t *dir, dentry_t *dentry, int mode, dev_t dev)
++#else
++mini_fo_mknod(inode_t *dir, dentry_t *dentry, int mode, int dev)
++#endif
++{
++	int err = 0;
++
++	check_mini_fo_dentry(dentry);
++
++	err = create_sto_nod(dentry, mode, dev);
++	if(err) {
++		printk(KERN_CRIT "mini_fo_mknod: creating sto nod failed.\n");
++		err = -EINVAL;
++	}
++
++	check_mini_fo_dentry(dentry);
++	return err;
++}
++
++
++STATIC int
++mini_fo_rename(inode_t *old_dir, dentry_t *old_dentry,
++	       inode_t *new_dir, dentry_t *new_dentry)
++{
++	/* dispatch */
++	if(S_ISDIR(old_dentry->d_inode->i_mode))
++		return rename_directory(old_dir, old_dentry, new_dir, new_dentry);
++	return rename_nondir(old_dir, old_dentry, new_dir, new_dentry);
++
++}
++
++int rename_directory(inode_t *old_dir, dentry_t *old_dentry,
++		     inode_t *new_dir, dentry_t *new_dentry)
++{
++	int err, bpath_len;
++	char *bpath;
++
++	dentry_t *hidden_old_dentry;
++	dentry_t *hidden_new_dentry;
++	dentry_t *hidden_old_dir_dentry;
++	dentry_t *hidden_new_dir_dentry;
++
++	err = 0;
++	bpath = NULL;
++	bpath_len = 0;
++
++	/* this is a test, chuck out if it works */
++	if(!(dtopd(new_dentry)->state == DELETED ||
++	     dtopd(new_dentry)->state == NON_EXISTANT)) {
++		printk(KERN_CRIT "mini_fo: rename_directory: \
++                                  uh, ah, new_dentry not negative.\n");
++		/* return -1; */
++	}
++
++	/* state = UNMODIFIED */
++	if(dtopd(old_dentry)->state == UNMODIFIED) {
++		err = dir_unmod_to_mod(old_dentry);
++		if (err)
++			goto out;
++	}
++
++	/* state = MODIFIED */
++	if(dtopd(old_dentry)->state == MODIFIED) {
++		bpath = meta_check_r_entry(old_dentry->d_parent,
++					   old_dentry->d_name.name,
++					   old_dentry->d_name.len);
++		if(bpath) {
++			err = meta_remove_r_entry(old_dentry->d_parent,
++						  old_dentry->d_name.name,
++						  old_dentry->d_name.len);
++			if(err) {
++				printk(KERN_CRIT "mini_fo: rename_directory:\
++                                                   meta_remove_r_entry \
++                                                  failed.\n");
++				goto out;
++			}
++			err = meta_add_r_entry(new_dentry->d_parent,
++					       bpath,
++					       strlen(bpath),
++					       new_dentry->d_name.name,
++					       new_dentry->d_name.len);
++			kfree(bpath);
++		}
++		else {/* wol it */
++			err = meta_add_d_entry(old_dentry->d_parent,
++					       old_dentry->d_name.name,
++					       old_dentry->d_name.len);
++			if (err)
++				goto out;
++			/* put it on rename list */
++			err = get_mini_fo_bpath(old_dentry,
++						&bpath,
++						&bpath_len);
++			if (err)
++				goto out;
++			err = meta_add_r_entry(new_dentry->d_parent,
++					       bpath, bpath_len,
++					       new_dentry->d_name.name,
++					       new_dentry->d_name.len);
++			if (err)
++				goto out;
++		}
++		/* no state change, MODIFIED stays MODIFIED */
++	}
++	/* state = CREATED */
++	if(dtopd(old_dentry)->state == CREATED ||
++	   dtopd(old_dentry)->state == DEL_REWRITTEN) {
++		if(dtohd(old_dentry))
++			dput(dtohd(old_dentry));
++
++		if(dtopd(new_dentry)->state == DELETED) {
++			dtopd(old_dentry)->state = DEL_REWRITTEN;
++			dtohd(old_dentry) = NULL;
++		}
++		else if(dtopd(new_dentry)->state == NON_EXISTANT) {
++			dtopd(old_dentry)->state = CREATED;
++			/* steal new dentry's neg. base dentry */
++			dtohd(old_dentry) = dtohd(new_dentry);
++			dtohd(new_dentry) = NULL;
++		}
++	}
++	if(dtopd(new_dentry)->state == UNMODIFIED ||
++	   dtopd(new_dentry)->state == NON_EXISTANT) {
++		err = get_neg_sto_dentry(new_dentry);
++		if(err)
++			goto out;
++	}
++
++	/* now move sto file */
++	hidden_old_dentry = dtohd2(old_dentry);
++	hidden_new_dentry = dtohd2(new_dentry);
++
++	dget(hidden_old_dentry);
++	dget(hidden_new_dentry);
++
++	hidden_old_dir_dentry = dget(hidden_old_dentry->d_parent);
++	hidden_new_dir_dentry = dget(hidden_new_dentry->d_parent);
++	double_lock(hidden_old_dir_dentry, hidden_new_dir_dentry);
++
++	err = vfs_rename(hidden_old_dir_dentry->d_inode, hidden_old_dentry,
++			 hidden_new_dir_dentry->d_inode, hidden_new_dentry);
++	if(err)
++		goto out_lock;
++
++	fist_copy_attr_all(new_dir, hidden_new_dir_dentry->d_inode);
++	if (new_dir != old_dir)
++		fist_copy_attr_all(old_dir,
++				   hidden_old_dir_dentry->d_inode);
++
++ out_lock:
++	/* double_unlock will dput the new/old parent dentries
++	 * whose refcnts were incremented via get_parent above. */
++	double_unlock(hidden_old_dir_dentry, hidden_new_dir_dentry);
++	dput(hidden_new_dentry);
++	dput(hidden_old_dentry);
++
++ out:
++	return err;
++}
++
++int rename_nondir(inode_t *old_dir, dentry_t *old_dentry,
++		  inode_t *new_dir, dentry_t *new_dentry)
++{
++	int err=0;
++
++	check_mini_fo_dentry(old_dentry);
++	check_mini_fo_dentry(new_dentry);
++	check_mini_fo_inode(old_dir);
++	check_mini_fo_inode(new_dir);
++
++	/* state: UNMODIFIED */
++	if(dtost(old_dentry) == UNMODIFIED) {
++		err = nondir_unmod_to_mod(old_dentry, 1);
++		if(err) {
++			err = -EINVAL;
++			goto out;
++		}
++	}
++
++	/* the easy states */
++	if(exists_in_storage(old_dentry)) {
++
++		dentry_t *hidden_old_dentry;
++		dentry_t *hidden_new_dentry;
++		dentry_t *hidden_old_dir_dentry;
++		dentry_t *hidden_new_dir_dentry;
++
++		/* if old file is MODIFIED, add it to the deleted_list */
++		if(dtopd(old_dentry)->state == MODIFIED) {
++			meta_add_d_entry(old_dentry->d_parent,
++					 old_dentry->d_name.name,
++					 old_dentry->d_name.len);
++
++			dput(dtohd(old_dentry));
++		}
++		/* if old file is CREATED, we only release the base dentry */
++		if(dtopd(old_dentry)->state == CREATED) {
++			if(dtohd(old_dentry))
++				dput(dtohd(old_dentry));
++		}
++
++		/* now setup the new states (depends on new_dentry state) */
++		/* new dentry state =  MODIFIED */
++		if(dtopd(new_dentry)->state == MODIFIED) {
++			meta_add_d_entry(new_dentry->d_parent,
++					 new_dentry->d_name.name,
++					 new_dentry->d_name.len);
++
++			/* new dentry will be d_put'ed later by the vfs
++			 * so don't do it here
++			 * dput(dtohd(new_dentry));
++			 */
++			dtohd(old_dentry) = NULL;
++			dtopd(old_dentry)->state = DEL_REWRITTEN;
++		}
++		/* new dentry state =  UNMODIFIED */
++		else if(dtopd(new_dentry)->state == UNMODIFIED) {
++			if(get_neg_sto_dentry(new_dentry))
++				return -EINVAL;
++
++			meta_add_d_entry(new_dentry->d_parent,
++					 new_dentry->d_name.name,
++					 new_dentry->d_name.len);
++
++			/* is this right??? */
++			/*dput(dtohd(new_dentry));*/
++			dtohd(old_dentry) = NULL;
++			dtopd(old_dentry)->state = DEL_REWRITTEN;
++		}
++		/* new dentry state =  CREATED */
++		else if(dtopd(new_dentry)->state == CREATED) {
++			/* we keep the neg. base dentry (if exists) */
++			dtohd(old_dentry) = dtohd(new_dentry);
++			/* ...and set it to Null, or we'll get
++			 * dcache.c:345 if it gets dput twice... */
++			dtohd(new_dentry) = NULL;
++			dtopd(old_dentry)->state = CREATED;
++		}
++		/* new dentry state =  NON_EXISTANT */
++		else if(dtopd(new_dentry)->state == NON_EXISTANT) {
++			if(get_neg_sto_dentry(new_dentry))
++				return -EINVAL;
++
++			/* we keep the neg. base dentry (if exists) */
++			dtohd(old_dentry) = dtohd(new_dentry);
++			/* ...and set it to Null, or we'll get
++			 * Dr. dcache.c:345 if it gets dput twice... */
++			dtohd(new_dentry) = NULL;
++			dtopd(old_dentry)->state = CREATED;
++		}
++		/* new dentry state =  DEL_REWRITTEN or DELETED */
++		else if(dtopd(new_dentry)->state == DEL_REWRITTEN ||
++			dtopd(new_dentry)->state == DELETED) {
++			dtohd(old_dentry) = NULL;
++			dtopd(old_dentry)->state = DEL_REWRITTEN;
++		}
++		else { /* not possible, uhh, ahh */
++			printk(KERN_CRIT
++			       "mini_fo: rename_reg_file: invalid state detected [1].\n");
++			return -1;
++		}
++
++		/* now we definitely have a sto file */
++		hidden_old_dentry = dtohd2(old_dentry);
++		hidden_new_dentry = dtohd2(new_dentry);
++
++		dget(hidden_old_dentry);
++		dget(hidden_new_dentry);
++
++		hidden_old_dir_dentry = dget(hidden_old_dentry->d_parent);
++		hidden_new_dir_dentry = dget(hidden_new_dentry->d_parent);
++		double_lock(hidden_old_dir_dentry, hidden_new_dir_dentry);
++
++		err = vfs_rename(hidden_old_dir_dentry->d_inode,
++				 hidden_old_dentry,
++				 hidden_new_dir_dentry->d_inode,
++				 hidden_new_dentry);
++		if(err)
++			goto out_lock;
++
++		fist_copy_attr_all(new_dir, hidden_new_dir_dentry->d_inode);
++		if (new_dir != old_dir)
++			fist_copy_attr_all(old_dir, hidden_old_dir_dentry->d_inode);
++
++	out_lock:
++		/* double_unlock will dput the new/old parent dentries
++		 * whose refcnts were incremented via get_parent above.
++		 */
++		double_unlock(hidden_old_dir_dentry, hidden_new_dir_dentry);
++		dput(hidden_new_dentry);
++		dput(hidden_old_dentry);
++	out:
++		return err;
++	}
++	else { /* invalid state */
++		printk(KERN_CRIT "mini_fo: rename_reg_file: ERROR: invalid state detected [2].\n");
++		return -1;
++	}
++}
++
++
++STATIC int
++mini_fo_readlink(dentry_t *dentry, char *buf, int bufsiz)
++{
++	int err=0;
++	dentry_t *hidden_dentry = NULL;
++
++	if(dtohd2(dentry) && dtohd2(dentry)->d_inode) {
++		hidden_dentry = dtohd2(dentry);
++	} else if(dtohd(dentry) && dtohd(dentry)->d_inode) {
++		hidden_dentry = dtohd(dentry);
++	} else {
++		goto out;
++	}
++
++	if (!hidden_dentry->d_inode->i_op ||
++	    !hidden_dentry->d_inode->i_op->readlink) {
++		err = -EINVAL;		goto out;
++	}
++
++	err = hidden_dentry->d_inode->i_op->readlink(hidden_dentry,
++						     buf,
++						     bufsiz);
++	if (err > 0)
++		fist_copy_attr_atime(dentry->d_inode, hidden_dentry->d_inode);
++
++ out:
++	return err;
++}
++
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
++static int mini_fo_follow_link(dentry_t *dentry, struct nameidata *nd)
++#else
++static void* mini_fo_follow_link(dentry_t *dentry, struct nameidata *nd)
++#endif
++{
++	char *buf;
++	int len = PAGE_SIZE, err;
++	mm_segment_t old_fs;
++
++	/* in 2.6 this is freed by mini_fo_put_link called by __do_follow_link */
++	buf = kmalloc(len, GFP_KERNEL);
++	if (!buf) {
++		err = -ENOMEM;
++		goto out;
++	}
++
++	/* read the symlink, and then we will follow it */
++	old_fs = get_fs();
++	set_fs(KERNEL_DS);
++	err = dentry->d_inode->i_op->readlink(dentry, buf, len);
++	set_fs(old_fs);
++	if (err < 0) {
++		kfree(buf);
++		buf = NULL;
++		goto out;
++	}
++	buf[err] = 0;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++        nd_set_link(nd, buf);
++        err = 0;
++#else
++	err = vfs_follow_link(nd, buf);
++#endif
++
++ out:
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	kfree(buf);
++#endif
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
++        return err;
++#else
++        return ERR_PTR(err);
++#endif
++}
++
++STATIC
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
++void mini_fo_put_link(struct dentry *dentry, struct nameidata *nd)
++#else
++void mini_fo_put_link(struct dentry *dentry, struct nameidata *nd, void *cookie)
++#endif
++{
++        char *link;
++        link = nd_get_link(nd);
++        kfree(link);
++}
++#endif
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_permission(inode_t *inode, int mask, struct nameidata *nd)
++#else
++mini_fo_permission(inode_t *inode, int mask)
++#endif
++{
++	inode_t *hidden_inode;
++	int mode;
++	int err;
++
++	if(itohi2(inode)) {
++		hidden_inode = itohi2(inode);
++	} else {
++		hidden_inode = itohi(inode);
++	}
++	mode = inode->i_mode;
++
++	/* not really needed, as permission handles everything:
++	 *	err = vfs_permission(inode, mask);
++	 *	if (err)
++	 *		goto out;
++	 */
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	err = permission(hidden_inode, mask, nd);
++#else
++	err = permission(hidden_inode, mask);
++#endif
++
++	/*  out: */
++	return err;
++}
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++STATIC int
++mini_fo_inode_revalidate(dentry_t *dentry)
++{
++	int err = 0;
++	dentry_t *hidden_dentry;
++	inode_t *hidden_inode;
++
++	ASSERT(dentry->d_inode);
++	ASSERT(itopd(dentry->d_inode));
++
++	if(itohi2(dentry->d_inode)) {
++                hidden_dentry = dtohd2(dentry);
++		hidden_inode = hidden_dentry->d_inode;
++	} else if(itohi(dentry->d_inode)) {
++                hidden_dentry = dtohd(dentry);
++		hidden_inode = hidden_dentry->d_inode;
++	} else {
++                printk(KERN_CRIT "mini_fo_inode_revalidate: ERROR, invalid state detected.\n");
++                err = -ENOENT;
++                goto out;
++        }
++	if (hidden_inode && hidden_inode->i_op && hidden_inode->i_op->revalidate){
++		err = hidden_inode->i_op->revalidate(hidden_dentry);
++		if (err)
++			goto out;
++	}
++	fist_copy_attr_all(dentry->d_inode, hidden_inode);
++ out:
++	return err;
++}
++#endif
++
++STATIC int
++mini_fo_setattr(dentry_t *dentry, struct iattr *ia)
++{
++	int err = 0;
++
++	check_mini_fo_dentry(dentry);
++
++	if(!is_mini_fo_existant(dentry)) {
++		printk(KERN_CRIT "mini_fo_setattr: ERROR, invalid state detected [1].\n");
++		goto out;
++	}
++
++	if(dtost(dentry) == UNMODIFIED) {
++		if(!IS_COPY_FLAG(ia->ia_valid))
++			goto out; /* we ignore these changes to base */
++
++		if(S_ISDIR(dentry->d_inode->i_mode)) {
++			err = dir_unmod_to_mod(dentry);
++		} else {
++			/* we copy contents if file is not beeing truncated */
++			if(S_ISREG(dentry->d_inode->i_mode) &&
++			   !(ia->ia_size == 0 && (ia->ia_valid & ATTR_SIZE))) {
++				err = nondir_unmod_to_mod(dentry, 1);
++			} else
++				err = nondir_unmod_to_mod(dentry, 0);
++		}
++		if(err) {
++			err = -EINVAL;
++			printk(KERN_CRIT "mini_fo_setattr: ERROR changing states.\n");
++			goto out;
++		}
++	}
++	if(!exists_in_storage(dentry)) {
++		printk(KERN_CRIT "mini_fo_setattr: ERROR, invalid state detected [2].\n");
++		err = -EINVAL;
++		goto out;
++	}
++	ASSERT(dentry->d_inode);
++	ASSERT(dtohd2(dentry));
++	ASSERT(itopd(dentry->d_inode));
++	ASSERT(itohi2(dentry->d_inode));
++
++	err = notify_change(dtohd2(dentry), ia);
++	fist_copy_attr_all(dentry->d_inode, itohi2(dentry->d_inode));
++ out:
++	return err;
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++STATIC int
++mini_fo_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat)
++{
++	int err = 0;
++        dentry_t *hidden_dentry;
++
++	ASSERT(dentry->d_inode);
++	ASSERT(itopd(dentry->d_inode));
++
++	if(itohi2(dentry->d_inode)) {
++                hidden_dentry = dtohd2(dentry);
++	} else if(itohi(dentry->d_inode)) {
++                hidden_dentry = dtohd(dentry);
++	} else {
++                printk(KERN_CRIT "mini_fo_getattr: ERROR, invalid state detected.\n");
++                err = -ENOENT;
++                goto out;
++        }
++	fist_copy_attr_all(dentry->d_inode, hidden_dentry->d_inode);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	generic_fillattr(dentry->d_inode, stat);
++	if (!stat->blksize) {
++		struct super_block *s = hidden_dentry->d_inode->i_sb;
++		unsigned blocks;
++		blocks = (stat->size+s->s_blocksize-1) >> s->s_blocksize_bits;
++		stat->blocks = (s->s_blocksize / 512) * blocks;
++		stat->blksize = s->s_blocksize;
++	}
++ out:
++        return err;
++}
++#endif
++
++#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20))
++#if 0 /* no xattr_alloc() and xattr_free() */
++/* This is lifted from fs/xattr.c */
++static void *
++xattr_alloc(size_t size, size_t limit)
++{
++	void *ptr;
++
++	if (size > limit)
++		return ERR_PTR(-E2BIG);
++
++	if (!size)	/* size request, no buffer is needed */
++		return NULL;
++	else if (size <= PAGE_SIZE)
++		ptr = kmalloc((unsigned long) size, GFP_KERNEL);
++	else
++		ptr = vmalloc((unsigned long) size);
++	if (!ptr)
++		return ERR_PTR(-ENOMEM);
++	return ptr;
++}
++
++static void
++xattr_free(void *ptr, size_t size)
++{
++	if (!size)	/* size request, no buffer was needed */
++		return;
++	else if (size <= PAGE_SIZE)
++		kfree(ptr);
++	else
++		vfree(ptr);
++}
++#endif /* no xattr_alloc() and xattr_free() */
++
++/* BKL held by caller.
++ * dentry->d_inode->i_sem down
++ */
++STATIC int
++mini_fo_getxattr(struct dentry *dentry, const char *name, void *value, size_t size) {
++	struct dentry *hidden_dentry = NULL;
++	int err = -EOPNOTSUPP;
++	/* Define these anyway so we don't need as much ifdef'ed code. */
++	char *encoded_name = NULL;
++	char *encoded_value = NULL;
++
++	check_mini_fo_dentry(dentry);
++
++	if(exists_in_storage(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else
++		hidden_dentry = dtohd(dentry);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	if (hidden_dentry->d_inode->i_op->getxattr) {
++		encoded_name = (char *)name;
++		encoded_value = (char *)value;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_dentry->d_inode->i_sem);
++#endif
++		/* lock_kernel() already done by caller. */
++		err = hidden_dentry->d_inode->i_op->getxattr(hidden_dentry, encoded_name, encoded_value, size);
++		/* unlock_kernel() will be done by caller. */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_dentry->d_inode->i_sem);
++#endif
++	}
++	return err;
++}
++
++/* BKL held by caller.
++ * dentry->d_inode->i_sem down
++ */
++STATIC int
++#if ((LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,21) \
++     && LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,23)) \
++     || LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
++mini_fo_setxattr(struct dentry *dentry, const char *name,
++		 const void *value, size_t size, int flags)
++#else
++mini_fo_setxattr(struct dentry *dentry, const char *name,
++		 void *value, size_t size, int flags)
++#endif
++
++{
++	struct dentry *hidden_dentry = NULL;
++	int err = -EOPNOTSUPP;
++
++	/* Define these anyway, so we don't have as much ifdef'ed code. */
++	char *encoded_value = NULL;
++	char *encoded_name = NULL;
++
++	check_mini_fo_dentry(dentry);
++
++	if(exists_in_storage(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else
++		hidden_dentry = dtohd(dentry);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	if (hidden_dentry->d_inode->i_op->setxattr) {
++		encoded_name = (char *)name;
++		encoded_value = (char *)value;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_dentry->d_inode->i_sem);
++#endif
++		/* lock_kernel() already done by caller. */
++		err = hidden_dentry->d_inode->i_op->setxattr(hidden_dentry, encoded_name, encoded_value, size, flags);
++		/* unlock_kernel() will be done by caller. */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_dentry->d_inode->i_sem);
++#endif
++	}
++	return err;
++}
++
++/* BKL held by caller.
++ * dentry->d_inode->i_sem down
++ */
++STATIC int
++mini_fo_removexattr(struct dentry *dentry, const char *name) {
++	struct dentry *hidden_dentry = NULL;
++	int err = -EOPNOTSUPP;
++	char *encoded_name;
++
++	check_mini_fo_dentry(dentry);
++
++	if(exists_in_storage(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else
++		hidden_dentry = dtohd(dentry);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	if (hidden_dentry->d_inode->i_op->removexattr) {
++		encoded_name = (char *)name;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_dentry->d_inode->i_sem);
++#endif
++		/* lock_kernel() already done by caller. */
++		err = hidden_dentry->d_inode->i_op->removexattr(hidden_dentry, encoded_name);
++		/* unlock_kernel() will be done by caller. */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_dentry->d_inode->i_sem);
++#endif
++	}
++	return err;
++}
++
++/* BKL held by caller.
++ * dentry->d_inode->i_sem down
++ */
++STATIC int
++mini_fo_listxattr(struct dentry *dentry, char *list, size_t size) {
++	struct dentry *hidden_dentry = NULL;
++	int err = -EOPNOTSUPP;
++	char *encoded_list = NULL;
++
++	check_mini_fo_dentry(dentry);
++
++	if(exists_in_storage(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else
++		hidden_dentry = dtohd(dentry);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	if (hidden_dentry->d_inode->i_op->listxattr) {
++		encoded_list = list;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_dentry->d_inode->i_sem);
++#endif
++		/* lock_kernel() already done by caller. */
++		err = hidden_dentry->d_inode->i_op->listxattr(hidden_dentry, encoded_list, size);
++		/* unlock_kernel() will be done by caller. */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_dentry->d_inode->i_sem);
++#endif
++	}
++	return err;
++}
++# endif /* defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20)) */
++
++struct inode_operations mini_fo_symlink_iops =
++	{
++		readlink:	mini_fo_readlink,
++		follow_link: mini_fo_follow_link,
++		/* mk: permission:	mini_fo_permission, */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++		revalidate:	mini_fo_inode_revalidate,
++#endif
++		setattr:	mini_fo_setattr,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		getattr:	mini_fo_getattr,
++		put_link:       mini_fo_put_link,
++#endif
++
++#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20))
++		setxattr:	mini_fo_setxattr,
++		getxattr:	mini_fo_getxattr,
++		listxattr:	mini_fo_listxattr,
++		removexattr: mini_fo_removexattr
++# endif /* defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20)) */
++	};
++
++struct inode_operations mini_fo_dir_iops =
++	{
++		create:	mini_fo_create,
++		lookup:	mini_fo_lookup,
++		link:	mini_fo_link,
++		unlink:	mini_fo_unlink,
++		symlink:	mini_fo_symlink,
++		mkdir:	mini_fo_mkdir,
++		rmdir:	mini_fo_rmdir,
++		mknod:	mini_fo_mknod,
++		rename:	mini_fo_rename,
++		/* no readlink/follow_link for non-symlinks */
++		// off because we have setattr
++		//    truncate:	mini_fo_truncate,
++		/* mk:permission:	mini_fo_permission, */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++		revalidate:	mini_fo_inode_revalidate,
++#endif
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		getattr:	mini_fo_getattr,
++#endif
++		setattr:	mini_fo_setattr,
++#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20))
++		setxattr:	mini_fo_setxattr,
++		getxattr:	mini_fo_getxattr,
++		listxattr:	mini_fo_listxattr,
++		removexattr: mini_fo_removexattr
++# endif /* XATTR && LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20) */
++	};
++
++struct inode_operations mini_fo_main_iops =
++	{
++		/* permission:	mini_fo_permission, */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++		revalidate:	mini_fo_inode_revalidate,
++#endif
++		setattr:	mini_fo_setattr,
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		getattr:	mini_fo_getattr,
++#endif
++#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20))
++		setxattr:	mini_fo_setxattr,
++		getxattr:	mini_fo_getxattr,
++		listxattr:	mini_fo_listxattr,
++		removexattr:    mini_fo_removexattr
++# endif /* XATTR && LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20) */
++	};
+--- /dev/null
++++ b/fs/mini_fo/main.c
+@@ -0,0 +1,423 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++#include <linux/module.h>
++
++/* This definition must only appear after we include <linux/module.h> */
++#ifndef MODULE_LICENSE
++# define MODULE_LICENSE(bison)
++#endif /* not MODULE_LICENSE */
++
++/*
++ * This is the mini_fo tri interpose function, which extends the
++ * functionality of the regular interpose by interposing a higher
++ * level inode on top of two lower level ones: the base filesystem
++ * inode and the storage filesystem inode.
++ *
++ *  sb we pass is mini_fo's super_block
++ */
++int
++mini_fo_tri_interpose(dentry_t *hidden_dentry,
++		      dentry_t *hidden_sto_dentry,
++		      dentry_t *dentry, super_block_t *sb, int flag)
++{
++	inode_t *hidden_inode = NULL;
++	inode_t *hidden_sto_inode = NULL; /* store corresponding storage inode */
++	int err = 0;
++	inode_t *inode;
++
++	/* Pointer to hidden_sto_inode if exists, else to hidden_inode.
++	 * This is used to copy the attributes of the correct inode. */
++	inode_t *master_inode;
++
++	if(hidden_dentry)
++		hidden_inode = hidden_dentry->d_inode;
++	if(hidden_sto_dentry)
++		hidden_sto_inode = hidden_sto_dentry->d_inode;
++
++	ASSERT(dentry->d_inode == NULL);
++
++	/* mk: One of the inodes associated with the dentrys is likely to
++	 * be NULL, so carefull:
++	 */
++	ASSERT((hidden_inode != NULL) || (hidden_sto_inode != NULL));
++
++	if(hidden_sto_inode)
++		master_inode = hidden_sto_inode;
++	else
++		master_inode = hidden_inode;
++
++	/*
++	 * We allocate our new inode below, by calling iget.
++	 * iget will call our read_inode which will initialize some
++	 * of the new inode's fields
++	 */
++
++	/*
++	 * original: inode = iget(sb, hidden_inode->i_ino);
++	 */
++	inode = iget(sb, iunique(sb, 25));
++	if (!inode) {
++		err = -EACCES;		/* should be impossible??? */
++		goto out;
++	}
++
++	/*
++	 * interpose the inode if not already interposed
++	 *   this is possible if the inode is being reused
++	 * XXX: what happens if we get_empty_inode() but there's another already?
++	 * for now, ASSERT() that this can't happen; fix later.
++	 */
++	if (itohi(inode) != NULL) {
++		printk(KERN_CRIT "mini_fo_tri_interpose: itohi(inode) != NULL.\n");
++	}
++	if (itohi2(inode) != NULL) {
++		printk(KERN_CRIT "mini_fo_tri_interpose: itohi2(inode) != NULL.\n");
++	}
++
++	/* mk: Carefull, igrab can't handle NULL inodes (ok, why should it?), so
++	 * we need to check here:
++	 */
++	if(hidden_inode)
++		itohi(inode) = igrab(hidden_inode);
++	else
++		itohi(inode) = NULL;
++
++	if(hidden_sto_inode)
++		itohi2(inode) = igrab(hidden_sto_inode);
++	else
++		itohi2(inode) = NULL;
++
++
++	/* Use different set of inode ops for symlinks & directories*/
++	if (S_ISLNK(master_inode->i_mode))
++		inode->i_op = &mini_fo_symlink_iops;
++	else if (S_ISDIR(master_inode->i_mode))
++		inode->i_op = &mini_fo_dir_iops;
++
++	/* Use different set of file ops for directories */
++	if (S_ISDIR(master_inode->i_mode))
++		inode->i_fop = &mini_fo_dir_fops;
++
++	/* properly initialize special inodes */
++	if (S_ISBLK(master_inode->i_mode) || S_ISCHR(master_inode->i_mode) ||
++	    S_ISFIFO(master_inode->i_mode) || S_ISSOCK(master_inode->i_mode)) {
++		init_special_inode(inode, master_inode->i_mode, master_inode->i_rdev);
++	}
++
++	/* Fix our inode's address operations to that of the lower inode */
++	if (inode->i_mapping->a_ops != master_inode->i_mapping->a_ops) {
++		inode->i_mapping->a_ops = master_inode->i_mapping->a_ops;
++	}
++
++	/* only (our) lookup wants to do a d_add */
++	if (flag)
++		d_add(dentry, inode);
++	else
++		d_instantiate(dentry, inode);
++
++	ASSERT(dtopd(dentry) != NULL);
++
++	/* all well, copy inode attributes */
++	fist_copy_attr_all(inode, master_inode);
++
++ out:
++	return err;
++}
++
++/* parse mount options "base=" and "sto=" */
++dentry_t *
++mini_fo_parse_options(super_block_t *sb, char *options)
++{
++	dentry_t *hidden_root = ERR_PTR(-EINVAL);
++	dentry_t *hidden_root2 = ERR_PTR(-EINVAL);
++	struct nameidata nd, nd2;
++	char *name, *tmp, *end;
++	int err = 0;
++
++	/* We don't want to go off the end of our arguments later on. */
++	for (end = options; *end; end++);
++
++	while (options < end) {
++		tmp = options;
++		while (*tmp && *tmp != ',')
++			tmp++;
++		*tmp = '\0';
++		if (!strncmp("base=", options, 5)) {
++			name = options + 5;
++			printk(KERN_INFO "mini_fo: using base directory: %s\n", name);
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++			if (path_init(name, LOOKUP_FOLLOW, &nd))
++				err = path_walk(name, &nd);
++#else
++			err = path_lookup(name, LOOKUP_FOLLOW, &nd);
++#endif
++			if (err) {
++				printk(KERN_CRIT "mini_fo: error accessing hidden directory '%s'\n", name);
++				hidden_root = ERR_PTR(err);
++				goto out;
++			}
++			hidden_root = nd.dentry;
++			stopd(sb)->base_dir_dentry = nd.dentry;
++			stopd(sb)->hidden_mnt = nd.mnt;
++
++		} else if(!strncmp("sto=", options, 4)) {
++			/* parse the storage dir */
++			name = options + 4;
++			printk(KERN_INFO "mini_fo: using storage directory: %s\n", name);
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++			if(path_init(name, LOOKUP_FOLLOW, &nd2))
++				err = path_walk(name, &nd2);
++#else
++                        err = path_lookup(name, LOOKUP_FOLLOW, &nd2);
++#endif
++			if(err) {
++				printk(KERN_CRIT "mini_fo: error accessing hidden storage directory '%s'\n", name);
++
++				hidden_root2 = ERR_PTR(err);
++				goto out;
++			}
++			hidden_root2 = nd2.dentry;
++			stopd(sb)->storage_dir_dentry = nd2.dentry;
++			stopd(sb)->hidden_mnt2 = nd2.mnt;
++			stohs2(sb) = hidden_root2->d_sb;
++
++			/* validate storage dir, this is done in
++			 * mini_fo_read_super for the base directory.
++			 */
++			if (IS_ERR(hidden_root2)) {
++				printk(KERN_WARNING "mini_fo_parse_options: storage dentry lookup failed (err = %ld)\n", PTR_ERR(hidden_root2));
++				goto out;
++			}
++			if (!hidden_root2->d_inode) {
++				printk(KERN_WARNING "mini_fo_parse_options: no storage dir to interpose on.\n");
++				goto out;
++			}
++			stohs2(sb) = hidden_root2->d_sb;
++		} else {
++			printk(KERN_WARNING "mini_fo: unrecognized option '%s'\n", options);
++			hidden_root = ERR_PTR(-EINVAL);
++			goto out;
++		}
++		options = tmp + 1;
++	}
++
++ out:
++	if(IS_ERR(hidden_root2))
++		return hidden_root2;
++	return hidden_root;
++}
++
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++static int
++#else
++super_block_t *
++#endif
++mini_fo_read_super(super_block_t *sb, void *raw_data, int silent)
++{
++	dentry_t *hidden_root;
++	int err = 0;
++
++	if (!raw_data) {
++		printk(KERN_WARNING "mini_fo_read_super: missing argument\n");
++		err = -EINVAL;
++		goto out;
++	}
++	/*
++	 * Allocate superblock private data
++	 */
++	__stopd(sb) = kmalloc(sizeof(struct mini_fo_sb_info), GFP_KERNEL);
++	if (!stopd(sb)) {
++		printk(KERN_WARNING "%s: out of memory\n", __FUNCTION__);
++		err = -ENOMEM;
++		goto out;
++	}
++	stohs(sb) = NULL;
++
++	hidden_root = mini_fo_parse_options(sb, raw_data);
++	if (IS_ERR(hidden_root)) {
++		printk(KERN_WARNING "mini_fo_read_super: lookup_dentry failed (err = %ld)\n", PTR_ERR(hidden_root));
++		err = PTR_ERR(hidden_root);
++		goto out_free;
++	}
++	if (!hidden_root->d_inode) {
++		printk(KERN_WARNING "mini_fo_read_super: no directory to interpose on\n");
++		goto out_free;
++	}
++	stohs(sb) = hidden_root->d_sb;
++
++	/*
++	 * Linux 2.4.2-ac3 and beyond has code in
++	 * mm/filemap.c:generic_file_write() that requires sb->s_maxbytes
++	 * to be populated.  If not set, all write()s under that sb will
++	 * return 0.
++	 *
++	 * Linux 2.4.4+ automatically sets s_maxbytes to MAX_NON_LFS;
++	 * the filesystem should override it only if it supports LFS.
++	 */
++	/* non-SCA code is good to go with LFS */
++	sb->s_maxbytes = hidden_root->d_sb->s_maxbytes;
++
++	sb->s_op = &mini_fo_sops;
++	/*
++	 * we can't use d_alloc_root if we want to use
++	 * our own interpose function unchanged,
++	 * so we simply replicate *most* of the code in d_alloc_root here
++	 */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	sb->s_root = d_alloc(NULL, &(const struct qstr) { "/", 1, 0 });
++#else
++	sb->s_root = d_alloc(NULL, &(const struct qstr){hash: 0, name: "/", len : 1});
++#endif
++	if (IS_ERR(sb->s_root)) {
++		printk(KERN_WARNING "mini_fo_read_super: d_alloc failed\n");
++		err = -ENOMEM;
++		goto out_dput;
++	}
++
++	sb->s_root->d_op = &mini_fo_dops;
++	sb->s_root->d_sb = sb;
++	sb->s_root->d_parent = sb->s_root;
++
++	/* link the upper and lower dentries */
++	__dtopd(sb->s_root) = (struct mini_fo_dentry_info *)
++		kmalloc(sizeof(struct mini_fo_dentry_info), GFP_KERNEL);
++	if (!dtopd(sb->s_root)) {
++		err = -ENOMEM;
++		goto out_dput2;
++	}
++	dtopd(sb->s_root)->state = MODIFIED;
++	dtohd(sb->s_root) = hidden_root;
++
++	/* fanout relevant, interpose on storage root dentry too */
++	dtohd2(sb->s_root) = stopd(sb)->storage_dir_dentry;
++
++	/* ...and call tri-interpose to interpose root dir inodes
++	 * if (mini_fo_interpose(hidden_root, sb->s_root, sb, 0))
++	 */
++	if(mini_fo_tri_interpose(hidden_root, dtohd2(sb->s_root), sb->s_root, sb, 0))
++		goto out_dput2;
++
++	/* initalize the wol list */
++	itopd(sb->s_root->d_inode)->deleted_list_size = -1;
++	itopd(sb->s_root->d_inode)->renamed_list_size = -1;
++	meta_build_lists(sb->s_root);
++
++	goto out;
++
++ out_dput2:
++	dput(sb->s_root);
++ out_dput:
++	dput(hidden_root);
++	dput(dtohd2(sb->s_root)); /* release the hidden_sto_dentry too */
++ out_free:
++	kfree(stopd(sb));
++	__stopd(sb) = NULL;
++ out:
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++        return err;
++#else
++        if (err) {
++		return ERR_PTR(err);
++        } else {
++		return sb;
++        }
++#endif
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++static int mini_fo_get_sb(struct file_system_type *fs_type,
++					  int flags, const char *dev_name,
++					  void *raw_data, struct vfsmount *mnt)
++{
++	return get_sb_nodev(fs_type, flags, raw_data, mini_fo_read_super, mnt);
++}
++#else
++static struct super_block *mini_fo_get_sb(struct file_system_type *fs_type,
++					  int flags, const char *dev_name,
++					  void *raw_data)
++{
++	return get_sb_nodev(fs_type, flags, raw_data, mini_fo_read_super);
++}
++#endif
++
++void mini_fo_kill_block_super(struct super_block *sb)
++{
++	generic_shutdown_super(sb);
++	/*
++	 *      XXX: BUG: Halcrow: Things get unstable sometime after this point:
++	 *      lib/rwsem-spinlock.c:127: spin_is_locked on uninitialized
++	 *      fs/fs-writeback.c:402: spin_lock(fs/super.c:a0381828) already
++	 *      locked by fs/fs-writeback.c/402
++	 *
++	 *      Apparently, someone's not releasing a lock on sb_lock...
++	 */
++}
++
++static struct file_system_type mini_fo_fs_type = {
++	.owner          = THIS_MODULE,
++	.name           = "mini_fo",
++	.get_sb         = mini_fo_get_sb,
++	.kill_sb        = mini_fo_kill_block_super,
++	.fs_flags       = 0,
++};
++
++
++#else
++static DECLARE_FSTYPE(mini_fo_fs_type, "mini_fo", mini_fo_read_super, 0);
++#endif
++
++static int __init init_mini_fo_fs(void)
++{
++	printk("Registering mini_fo version $Id$\n");
++	return register_filesystem(&mini_fo_fs_type);
++}
++static void __exit exit_mini_fo_fs(void)
++{
++	printk("Unregistering mini_fo version $Id$\n");
++	unregister_filesystem(&mini_fo_fs_type);
++}
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++EXPORT_NO_SYMBOLS;
++#endif
++
++MODULE_AUTHOR("Erez Zadok <ezk@cs.sunysb.edu>");
++MODULE_DESCRIPTION("FiST-generated mini_fo filesystem");
++MODULE_LICENSE("GPL");
++
++/* MODULE_PARM(fist_debug_var, "i"); */
++/* MODULE_PARM_DESC(fist_debug_var, "Debug level"); */
++
++module_init(init_mini_fo_fs)
++module_exit(exit_mini_fo_fs)
+--- /dev/null
++++ b/fs/mini_fo/Makefile
+@@ -0,0 +1,17 @@
++#
++# Makefile for mini_fo 2.4 and 2.6 Linux kernels
++#
++# Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License
++# as published by the Free Software Foundation; either version
++# 2 of the License, or (at your option) any later version.
++#
++
++obj-$(CONFIG_MINI_FO) := mini_fo.o
++mini_fo-objs   := meta.o dentry.o file.o inode.o main.o super.o state.o aux.o
++
++# dependencies
++${mini_fo-objs}: mini_fo.h fist.h
++
+--- /dev/null
++++ b/fs/mini_fo/meta.c
+@@ -0,0 +1,1000 @@
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif /* HAVE_CONFIG_H */
++#include "fist.h"
++#include "mini_fo.h"
++
++int meta_build_lists(dentry_t *dentry)
++{
++	struct mini_fo_inode_info *inode_info;
++
++	dentry_t *meta_dentry = 0;
++	file_t *meta_file = 0;
++	mm_segment_t old_fs;
++	void *buf;
++
++	int bytes, len;
++	struct vfsmount *meta_mnt;
++	char *entry;
++
++	inode_info = itopd(dentry->d_inode);
++	if(!(inode_info->deleted_list_size == -1 &&
++	     inode_info->renamed_list_size == -1)) {
++		printk(KERN_CRIT "mini_fo: meta_build_lists: \
++                                  Error, list(s) not virgin.\n");
++		return -1;
++	}
++
++	/* init our meta lists */
++	INIT_LIST_HEAD(&inode_info->deleted_list);
++	inode_info->deleted_list_size = 0;
++
++	INIT_LIST_HEAD(&inode_info->renamed_list);
++	inode_info->renamed_list_size = 0;
++
++  	/* might there be a META-file? */
++	if(dtohd2(dentry) && dtohd2(dentry)->d_inode) {
++		meta_dentry = lookup_one_len(META_FILENAME,
++					     dtohd2(dentry),
++					     strlen(META_FILENAME));
++		if(!meta_dentry->d_inode) {
++			dput(meta_dentry);
++			goto out_ok;
++		}
++		/* $%& err, is this correct? */
++		meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++		mntget(meta_mnt);
++
++
++		/* open META-file for reading */
++		meta_file = dentry_open(meta_dentry, meta_mnt, 0x0);
++		if(!meta_file || IS_ERR(meta_file)) {
++			printk(KERN_CRIT "mini_fo: meta_build_lists: \
++                                          ERROR opening META file.\n");
++			goto out_err;
++		}
++
++		/* check if fs supports reading */
++		if(!meta_file->f_op->read) {
++			printk(KERN_CRIT "mini_fo: meta_build_lists: \
++                                          ERROR, fs does not support reading.\n");
++			goto out_err_close;
++		}
++
++		/* allocate a page for transfering the data */
++		buf = (void *) __get_free_page(GFP_KERNEL);
++		if(!buf) {
++			printk(KERN_CRIT "mini_fo: meta_build_lists: \
++                                          ERROR, out of mem.\n");
++			goto out_err_close;
++		}
++		meta_file->f_pos = 0;
++		old_fs = get_fs();
++		set_fs(KERNEL_DS);
++		do {
++			char *c;
++			bytes = meta_file->f_op->read(meta_file, buf, PAGE_SIZE, &meta_file->f_pos);
++			if(bytes == PAGE_SIZE) {
++				/* trim a cut off filename and adjust f_pos to get it next time */
++				for(c = (char*) buf+PAGE_SIZE;
++				    *c != '\n';
++				    c--, bytes--, meta_file->f_pos--);
++			}
++			entry = (char *) buf;
++			while(entry < (char *) buf+bytes) {
++
++				char *old_path;
++				char *dir_name;
++				int old_len, new_len;
++
++				/* len without '\n'*/
++				len = (int) (strchr(entry, '\n') - entry);
++				switch (*entry) {
++				case 'D':
++					/* format: "D filename" */
++					meta_list_add_d_entry(dentry,
++							      entry+2,
++							      len-2);
++					break;
++				case 'R':
++					/* format: "R path/xy/dir newDir" */
++					old_path = entry+2;
++					dir_name = strchr(old_path, ' ') + 1;
++					old_len =  dir_name - old_path - 1;
++					new_len = ((int) entry) + len - ((int ) dir_name);
++					meta_list_add_r_entry(dentry,
++							      old_path,
++							      old_len,
++							      dir_name,
++							      new_len);
++					break;
++				default:
++					/* unknown entry type detected */
++					break;
++				}
++				entry += len+1;
++			}
++
++		} while(meta_file->f_pos < meta_dentry->d_inode->i_size);
++
++		free_page((unsigned long) buf);
++		set_fs(old_fs);
++		fput(meta_file);
++	}
++	goto out_ok;
++
++ out_err_close:
++	fput(meta_file);
++ out_err:
++	mntput(meta_mnt);
++	dput(meta_dentry);
++	return -1;
++ out_ok:
++	return 1; /* check this!!! inode_info->wol_size; */
++}
++
++/* cleanups up all lists and free's the mem by dentry */
++int meta_put_lists(dentry_t *dentry)
++{
++	if(!dentry || !dentry->d_inode) {
++		printk("mini_fo: meta_put_lists: invalid dentry passed.\n");
++		return -1;
++	}
++	return __meta_put_lists(dentry->d_inode);
++}
++
++/* cleanups up all lists and free's the mem by inode */
++int __meta_put_lists(inode_t *inode)
++{
++	int err = 0;
++	if(!inode || !itopd(inode)) {
++		printk("mini_fo: __meta_put_lists: invalid inode passed.\n");
++		return -1;
++	}
++	err = __meta_put_d_list(inode);
++	err |= __meta_put_r_list(inode);
++	return err;
++}
++
++int meta_sync_lists(dentry_t *dentry)
++{
++	int err = 0;
++	if(!dentry || !dentry->d_inode) {
++		printk("mini_fo: meta_sync_lists: \
++                        invalid dentry passed.\n");
++		return -1;
++	}
++	err = meta_sync_d_list(dentry, 0);
++	err |= meta_sync_r_list(dentry, 1);
++	return err;
++}
++
++
++/* remove all D entries from the renamed list and free the mem */
++int __meta_put_d_list(inode_t *inode)
++{
++	struct list_head *tmp;
++        struct deleted_entry *del_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode)) {
++		printk(KERN_CRIT "mini_fo: __meta_put_d_list: \
++                                  invalid inode passed.\n");
++		return -1;
++	}
++	inode_info = itopd(inode);
++
++        /* nuke the DELETED-list */
++        if(inode_info->deleted_list_size <= 0)
++		return 0;
++
++	while(!list_empty(&inode_info->deleted_list)) {
++		tmp = inode_info->deleted_list.next;
++		list_del(tmp);
++		del_entry = list_entry(tmp, struct deleted_entry, list);
++		kfree(del_entry->name);
++		kfree(del_entry);
++	}
++	inode_info->deleted_list_size = 0;
++
++	return 0;
++}
++
++/* remove all R entries from the renamed list and free the mem */
++int __meta_put_r_list(inode_t *inode)
++{
++	struct list_head *tmp;
++	struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode)) {
++		printk(KERN_CRIT "mini_fo: meta_put_r_list: invalid inode.\n");
++		return -1;
++	}
++	inode_info = itopd(inode);
++
++        /* nuke the RENAMED-list */
++        if(inode_info->renamed_list_size <= 0)
++		return 0;
++
++	while(!list_empty(&inode_info->renamed_list)) {
++		tmp = inode_info->renamed_list.next;
++		list_del(tmp);
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		kfree(ren_entry->new_name);
++		kfree(ren_entry->old_name);
++		kfree(ren_entry);
++	}
++	inode_info->renamed_list_size = 0;
++
++	return 0;
++}
++
++int meta_add_d_entry(dentry_t *dentry, const char *name, int len)
++{
++	int err = 0;
++	err = meta_list_add_d_entry(dentry, name, len);
++	err |= meta_write_d_entry(dentry,name,len);
++	return err;
++}
++
++/* add a D entry to the deleted list */
++int meta_list_add_d_entry(dentry_t *dentry, const char *name, int len)
++{
++        struct deleted_entry *del_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_list_add_d_entry: \
++                                  invalid dentry passed.\n");
++		return -1;
++	}
++	inode_info = itopd(dentry->d_inode);
++
++        if(inode_info->deleted_list_size < 0)
++                return -1;
++
++        del_entry = (struct deleted_entry *)
++		kmalloc(sizeof(struct deleted_entry), GFP_KERNEL);
++        del_entry->name = (char*) kmalloc(len, GFP_KERNEL);
++        if(!del_entry || !del_entry->name) {
++                printk(KERN_CRIT "mini_fo: meta_list_add_d_entry: \
++                                  out of mem.\n");
++		kfree(del_entry->name);
++		kfree(del_entry);
++                return -ENOMEM;
++        }
++
++        strncpy(del_entry->name, name, len);
++        del_entry->len = len;
++
++        list_add(&del_entry->list, &inode_info->deleted_list);
++        inode_info->deleted_list_size++;
++        return 0;
++}
++
++int meta_add_r_entry(dentry_t *dentry,
++			  const char *old_name, int old_len,
++			  const char *new_name, int new_len)
++{
++	int err = 0;
++	err = meta_list_add_r_entry(dentry,
++				    old_name, old_len,
++				    new_name, new_len);
++	err |= meta_write_r_entry(dentry,
++				  old_name, old_len,
++				  new_name, new_len);
++	return err;
++}
++
++/* add a R entry to the renamed list */
++int meta_list_add_r_entry(dentry_t *dentry,
++			  const char *old_name, int old_len,
++			  const char *new_name, int new_len)
++{
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_list_add_r_entry: \
++                                  invalid dentry passed.\n");
++		return -1;
++	}
++	inode_info = itopd(dentry->d_inode);
++
++        if(inode_info->renamed_list_size < 0)
++                return -1;
++
++        ren_entry = (struct renamed_entry *)
++		kmalloc(sizeof(struct renamed_entry), GFP_KERNEL);
++        ren_entry->old_name = (char*) kmalloc(old_len, GFP_KERNEL);
++        ren_entry->new_name = (char*) kmalloc(new_len, GFP_KERNEL);
++
++        if(!ren_entry || !ren_entry->old_name || !ren_entry->new_name) {
++                printk(KERN_CRIT "mini_fo: meta_list_add_r_entry: \
++                                  out of mem.\n");
++		kfree(ren_entry->new_name);
++		kfree(ren_entry->old_name);
++		kfree(ren_entry);
++                return -ENOMEM;
++        }
++
++        strncpy(ren_entry->old_name, old_name, old_len);
++        ren_entry->old_len = old_len;
++        strncpy(ren_entry->new_name, new_name, new_len);
++        ren_entry->new_len = new_len;
++
++        list_add(&ren_entry->list, &inode_info->renamed_list);
++        inode_info->renamed_list_size++;
++        return 0;
++}
++
++
++int meta_remove_r_entry(dentry_t *dentry, const char *name, int len)
++{
++	int err = 0;
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT
++		       "mini_fo: meta_remove_r_entry: \
++                        invalid dentry passed.\n");
++		return -1;
++	}
++
++	err = meta_list_remove_r_entry(dentry, name, len);
++	err |= meta_sync_lists(dentry);
++	return err;
++}
++
++int meta_list_remove_r_entry(dentry_t *dentry, const char *name, int len)
++{
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT
++		       "mini_fo: meta_list_remove_r_entry: \
++                        invalid dentry passed.\n");
++		return -1;
++	}
++	return __meta_list_remove_r_entry(dentry->d_inode, name, len);
++}
++
++int __meta_list_remove_r_entry(inode_t *inode, const char *name, int len)
++{
++	struct list_head *tmp;
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode))
++		printk(KERN_CRIT
++		       "mini_fo: __meta_list_remove_r_entry: \
++                        invalid inode passed.\n");
++	inode_info = itopd(inode);
++
++        if(inode_info->renamed_list_size < 0)
++                return -1;
++        if(inode_info->renamed_list_size == 0)
++                return 1;
++
++	list_for_each(tmp, &inode_info->renamed_list) {
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		if(ren_entry->new_len != len)
++			continue;
++
++		if(!strncmp(ren_entry->new_name, name, len)) {
++			list_del(tmp);
++			kfree(ren_entry->new_name);
++			kfree(ren_entry->old_name);
++			kfree(ren_entry);
++			inode_info->renamed_list_size--;
++			return 0;
++		}
++	}
++	return 1;
++}
++
++
++/* append a single D entry to the meta file */
++int meta_write_d_entry(dentry_t *dentry, const char *name, int len)
++{
++	dentry_t *meta_dentry = 0;
++        file_t *meta_file = 0;
++        mm_segment_t old_fs;
++
++        int bytes, err;
++        struct vfsmount *meta_mnt = 0;
++        char *buf;
++
++	err = 0;
++
++	if(itopd(dentry->d_inode)->deleted_list_size < 0) {
++		err = -1;
++		goto out;
++	}
++
++	if(dtopd(dentry)->state == UNMODIFIED) {
++                err = build_sto_structure(dentry->d_parent, dentry);
++                if(err) {
++                        printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                          build_sto_structure failed.\n");
++			goto out;
++                }
++        }
++	meta_dentry = lookup_one_len(META_FILENAME,
++				     dtohd2(dentry), strlen (META_FILENAME));
++
++	/* We need to create a META-file */
++        if(!meta_dentry->d_inode) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry,
++			   S_IRUSR | S_IWUSR,
++			   NULL);
++#else
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry,
++			   S_IRUSR | S_IWUSR);
++#endif
++	}
++        /* open META-file for writing */
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        if(!meta_file || IS_ERR(meta_file)) {
++                printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                  ERROR opening meta file.\n");
++                mntput(meta_mnt); /* $%& is this necessary? */
++                dput(meta_dentry);
++		err = -1;
++                goto out;
++        }
++
++        /* check if fs supports writing */
++        if(!meta_file->f_op->write) {
++                printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                  ERROR, fs does not support writing.\n");
++                goto out_err_close;
++        }
++
++	meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */
++        old_fs = get_fs();
++        set_fs(KERNEL_DS);
++
++	/* size: len for name, 1 for \n and 2 for "D " */
++	buf = (char *) kmalloc(len+3, GFP_KERNEL);
++	if (!buf) {
++		printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                  out of mem.\n");
++		return -ENOMEM;
++	}
++
++	buf[0] = 'D';
++	buf[1] = ' ';
++	strncpy(buf+2, name, len);
++	buf[len+2] = '\n';
++	bytes = meta_file->f_op->write(meta_file, buf, len+3,
++				       &meta_file->f_pos);
++	if(bytes != len+3) {
++		printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                  ERROR writing.\n");
++		err = -1;
++	}
++	kfree(buf);
++	set_fs(old_fs);
++
++ out_err_close:
++	fput(meta_file);
++ out:
++	return err;
++}
++
++/* append a single R entry to the meta file */
++int meta_write_r_entry(dentry_t *dentry,
++		       const char *old_name, int old_len,
++		       const char *new_name, int new_len)
++{
++	dentry_t *meta_dentry = 0;
++        file_t *meta_file = 0;
++        mm_segment_t old_fs;
++
++        int bytes, err, buf_len;
++	struct vfsmount *meta_mnt = 0;
++        char *buf;
++
++
++	err = 0;
++
++	if(itopd(dentry->d_inode)->renamed_list_size < 0) {
++		err = -1;
++		goto out;
++	}
++
++	/* build the storage structure? */
++	if(dtopd(dentry)->state == UNMODIFIED) {
++                err = build_sto_structure(dentry->d_parent, dentry);
++                if(err) {
++                        printk(KERN_CRIT "mini_fo: meta_write_r_entry: \
++                                          build_sto_structure failed.\n");
++			goto out;
++                }
++        }
++	meta_dentry = lookup_one_len(META_FILENAME,
++				     dtohd2(dentry),
++				     strlen (META_FILENAME));
++        if(!meta_dentry->d_inode) {
++                /* We need to create a META-file */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR, NULL);
++#else
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR);
++#endif
++	}
++        /* open META-file for writing */
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        if(!meta_file || IS_ERR(meta_file)) {
++                printk(KERN_CRIT "mini_fo: meta_write_r_entry: \
++                                  ERROR opening meta file.\n");
++                mntput(meta_mnt);
++                dput(meta_dentry);
++		err = -1;
++                goto out;
++        }
++
++        /* check if fs supports writing */
++        if(!meta_file->f_op->write) {
++                printk(KERN_CRIT "mini_fo: meta_write_r_entry: \
++                                  ERROR, fs does not support writing.\n");
++                goto out_err_close;
++        }
++
++	meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */
++        old_fs = get_fs();
++        set_fs(KERNEL_DS);
++
++	/* size: 2 for "R ", old_len+new_len for names, 1 blank+1 \n */
++	buf_len = old_len + new_len + 4;
++	buf = (char *) kmalloc(buf_len, GFP_KERNEL);
++	if (!buf) {
++		printk(KERN_CRIT "mini_fo: meta_write_r_entry: out of mem.\n");
++		return -ENOMEM;
++	}
++
++	buf[0] = 'R';
++	buf[1] = ' ';
++	strncpy(buf + 2, old_name, old_len);
++	buf[old_len + 2] = ' ';
++	strncpy(buf + old_len + 3, new_name, new_len);
++	buf[buf_len -1] = '\n';
++	bytes = meta_file->f_op->write(meta_file, buf, buf_len, &meta_file->f_pos);
++	if(bytes != buf_len) {
++		printk(KERN_CRIT "mini_fo: meta_write_r_entry: ERROR writing.\n");
++		err = -1;
++	}
++
++	kfree(buf);
++	set_fs(old_fs);
++
++ out_err_close:
++	fput(meta_file);
++ out:
++	return err;
++}
++
++/* sync D list to disk, append data if app_flag is 1 */
++/* check the meta_mnt, which seems not to be used (properly)  */
++
++int meta_sync_d_list(dentry_t *dentry, int app_flag)
++{
++	dentry_t *meta_dentry;
++        file_t *meta_file;
++        mm_segment_t old_fs;
++
++        int bytes, err;
++        struct vfsmount *meta_mnt;
++        char *buf;
++
++	struct list_head *tmp;
++        struct deleted_entry *del_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	err = 0;
++	meta_file=0;
++	meta_mnt=0;
++
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                  invalid inode passed.\n");
++		err = -1;
++		goto out;
++	}
++	inode_info = itopd(dentry->d_inode);
++
++        if(inode_info->deleted_list_size < 0) {
++		err = -1;
++		goto out;
++	}
++
++	/* ok, there is something to sync */
++
++	/* build the storage structure? */
++        if(!dtohd2(dentry) && !itohi2(dentry->d_inode)) {
++                err = build_sto_structure(dentry->d_parent, dentry);
++                if(err) {
++                        printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                          build_sto_structure failed.\n");
++			goto out;
++                }
++        }
++	meta_dentry = lookup_one_len(META_FILENAME,
++				     dtohd2(dentry),
++				     strlen(META_FILENAME));
++        if(!meta_dentry->d_inode) {
++                /* We need to create a META-file */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR, NULL);
++#else
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR);
++#endif
++		app_flag = 0;
++	}
++	/* need we truncate the meta file? */
++	if(!app_flag) {
++		struct iattr newattrs;
++                newattrs.ia_size = 0;
++                newattrs.ia_valid = ATTR_SIZE | ATTR_CTIME;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&meta_dentry->d_inode->i_mutex);
++#else
++                down(&meta_dentry->d_inode->i_sem);
++#endif
++                err = notify_change(meta_dentry, &newattrs);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&meta_dentry->d_inode->i_mutex);
++#else
++                up(&meta_dentry->d_inode->i_sem);
++#endif
++
++                if(err || meta_dentry->d_inode->i_size != 0) {
++                        printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                          ERROR truncating meta file.\n");
++                        goto out_err_close;
++		}
++	}
++
++        /* open META-file for writing */
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        if(!meta_file || IS_ERR(meta_file)) {
++                printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                  ERROR opening meta file.\n");
++		/* we don't mntget so we dont't mntput (for now)
++		 * mntput(meta_mnt);
++		 */
++		dput(meta_dentry);
++		err = -1;
++                goto out;
++        }
++
++        /* check if fs supports writing */
++        if(!meta_file->f_op->write) {
++                printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                  ERROR, fs does not support writing.\n");
++                goto out_err_close;
++        }
++
++	meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */
++        old_fs = get_fs();
++        set_fs(KERNEL_DS);
++
++	/* here we go... */
++        list_for_each(tmp, &inode_info->deleted_list) {
++		del_entry = list_entry(tmp, struct deleted_entry, list);
++
++		/* size: len for name, 1 for \n and 2 for "D " */
++		buf = (char *) kmalloc(del_entry->len+3, GFP_KERNEL);
++		if (!buf) {
++			printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                          out of mem.\n");
++			return -ENOMEM;
++		}
++
++		buf[0] = 'D';
++		buf[1] = ' ';
++		strncpy(buf+2, del_entry->name, del_entry->len);
++		buf[del_entry->len+2] = '\n';
++		bytes = meta_file->f_op->write(meta_file, buf,
++					       del_entry->len+3,
++					       &meta_file->f_pos);
++		if(bytes != del_entry->len+3) {
++			printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                          ERROR writing.\n");
++			err |= -1;
++		}
++		kfree(buf);
++	}
++	set_fs(old_fs);
++
++ out_err_close:
++	fput(meta_file);
++ out:
++	return err;
++
++}
++
++int meta_sync_r_list(dentry_t *dentry, int app_flag)
++{
++	dentry_t *meta_dentry;
++        file_t *meta_file;
++        mm_segment_t old_fs;
++
++        int bytes, err, buf_len;
++        struct vfsmount *meta_mnt;
++        char *buf;
++
++	struct list_head *tmp;
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	err = 0;
++	meta_file=0;
++	meta_mnt=0;
++
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                  invalid dentry passed.\n");
++		err = -1;
++		goto out;
++	}
++	inode_info = itopd(dentry->d_inode);
++
++        if(inode_info->deleted_list_size < 0) {
++		err = -1;
++		goto out;
++	}
++
++	/* ok, there is something to sync */
++
++	/* build the storage structure? */
++        if(!dtohd2(dentry) && !itohi2(dentry->d_inode)) {
++                err = build_sto_structure(dentry->d_parent, dentry);
++                if(err) {
++                        printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                          build_sto_structure failed.\n");
++			goto out;
++                }
++        }
++	meta_dentry = lookup_one_len(META_FILENAME,
++				     dtohd2(dentry),
++				     strlen(META_FILENAME));
++        if(!meta_dentry->d_inode) {
++                /* We need to create a META-file */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR, NULL);
++#else
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR);
++#endif
++		app_flag = 0;
++	}
++	/* need we truncate the meta file? */
++	if(!app_flag) {
++		struct iattr newattrs;
++                newattrs.ia_size = 0;
++                newattrs.ia_valid = ATTR_SIZE | ATTR_CTIME;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&meta_dentry->d_inode->i_mutex);
++#else
++                down(&meta_dentry->d_inode->i_sem);
++#endif
++                err = notify_change(meta_dentry, &newattrs);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&meta_dentry->d_inode->i_mutex);
++#else
++                up(&meta_dentry->d_inode->i_sem);
++#endif
++                if(err || meta_dentry->d_inode->i_size != 0) {
++                        printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                          ERROR truncating meta file.\n");
++                        goto out_err_close;
++		}
++	}
++
++        /* open META-file for writing */
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        if(!meta_file || IS_ERR(meta_file)) {
++                printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                  ERROR opening meta file.\n");
++		/* we don't mntget so we dont't mntput (for now)
++		 * mntput(meta_mnt);
++		 */
++		dput(meta_dentry);
++		err = -1;
++                goto out;
++        }
++
++        /* check if fs supports writing */
++        if(!meta_file->f_op->write) {
++                printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                  ERROR, fs does not support writing.\n");
++                goto out_err_close;
++        }
++
++	meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */
++        old_fs = get_fs();
++        set_fs(KERNEL_DS);
++
++	/* here we go... */
++        list_for_each(tmp, &inode_info->renamed_list) {
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		/* size:
++		 * 2 for "R ", old_len+new_len for names, 1 blank+1 \n */
++		buf_len = ren_entry->old_len + ren_entry->new_len + 4;
++		buf = (char *) kmalloc(buf_len, GFP_KERNEL);
++		if (!buf) {
++			printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                          out of mem.\n");
++			return -ENOMEM;
++		}
++		buf[0] = 'R';
++		buf[1] = ' ';
++		strncpy(buf + 2, ren_entry->old_name, ren_entry->old_len);
++		buf[ren_entry->old_len + 2] = ' ';
++		strncpy(buf + ren_entry->old_len + 3,
++			ren_entry->new_name, ren_entry->new_len);
++		buf[buf_len - 1] = '\n';
++		bytes = meta_file->f_op->write(meta_file, buf,
++					       buf_len, &meta_file->f_pos);
++		if(bytes != buf_len) {
++			printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                          ERROR writing.\n");
++			err |= -1;
++		}
++		kfree(buf);
++	}
++	set_fs(old_fs);
++
++ out_err_close:
++	fput(meta_file);
++ out:
++	return err;
++}
++
++int meta_check_d_entry(dentry_t *dentry, const char *name, int len)
++{
++	if(!dentry || !dentry->d_inode)
++		printk(KERN_CRIT "mini_fo: meta_check_d_dentry: \
++                                  invalid dentry passed.\n");
++	return __meta_check_d_entry(dentry->d_inode, name, len);
++}
++
++int __meta_check_d_entry(inode_t *inode, const char *name, int len)
++{
++	struct list_head *tmp;
++        struct deleted_entry *del_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode))
++		printk(KERN_CRIT "mini_fo: __meta_check_d_dentry: \
++                                  invalid inode passed.\n");
++
++        inode_info = itopd(inode);
++
++        if(inode_info->deleted_list_size <= 0)
++                return 0;
++
++        list_for_each(tmp, &inode_info->deleted_list) {
++		del_entry = list_entry(tmp, struct deleted_entry, list);
++		if(del_entry->len != len)
++			continue;
++
++		if(!strncmp(del_entry->name, name, len))
++			return 1;
++	}
++	return 0;
++}
++
++/*
++ * check if file has been renamed and return path to orig. base dir.
++ * Implements no error return values so far, what of course sucks.
++ * String is null terminated.'
++ */
++char* meta_check_r_entry(dentry_t *dentry, const char *name, int len)
++{
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_check_r_dentry: \
++                                  invalid dentry passed.\n");
++		return NULL;
++	}
++	return __meta_check_r_entry(dentry->d_inode, name, len);
++}
++
++char* __meta_check_r_entry(inode_t *inode, const char *name, int len)
++{
++	struct list_head *tmp;
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++	char *old_path;
++
++	if(!inode || !itopd(inode)) {
++		printk(KERN_CRIT "mini_fo: meta_check_r_dentry: \
++                                  invalid inode passed.\n");
++		return NULL;
++	}
++	inode_info = itopd(inode);
++
++        if(inode_info->renamed_list_size <= 0)
++                return NULL;
++
++        list_for_each(tmp, &inode_info->renamed_list) {
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		if(ren_entry->new_len != len)
++			continue;
++
++		if(!strncmp(ren_entry->new_name, name, len)) {
++			old_path = (char *)
++				kmalloc(ren_entry->old_len+1, GFP_KERNEL);
++			strncpy(old_path,
++				ren_entry->old_name,
++				ren_entry->old_len);
++			old_path[ren_entry->old_len]='\0';
++			return old_path;
++		}
++	}
++	return NULL;
++}
++
++/*
++ * This version only checks if entry exists and return:
++ *     1 if exists,
++ *     0 if not,
++ *    -1 if error.
++ */
++int meta_is_r_entry(dentry_t *dentry, const char *name, int len)
++{
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_check_r_dentry [2]: \
++                                  invalid dentry passed.\n");
++		return -1;
++	}
++	return __meta_is_r_entry(dentry->d_inode, name, len);
++}
++
++int __meta_is_r_entry(inode_t *inode, const char *name, int len)
++{
++	struct list_head *tmp;
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode)) {
++		printk(KERN_CRIT "mini_fo: meta_check_r_dentry [2]: \
++                                  invalid inode passed.\n");
++		return -1;
++	}
++	inode_info = itopd(inode);
++
++        if(inode_info->renamed_list_size <= 0)
++                return -1;
++
++        list_for_each(tmp, &inode_info->renamed_list) {
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		if(ren_entry->new_len != len)
++			continue;
++
++		if(!strncmp(ren_entry->new_name, name, len))
++			return 1;
++	}
++	return 0;
++}
++
+--- /dev/null
++++ b/fs/mini_fo/mini_fo.h
+@@ -0,0 +1,510 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifndef __MINI_FO_H_
++#define __MINI_FO_H_
++
++#ifdef __KERNEL__
++
++/* META stuff */
++#define META_FILENAME "META_dAfFgHE39ktF3HD2sr"
++
++/* use xattrs? */
++#define XATTR
++
++/* File attributes that when changed, result in a file beeing copied to storage */
++#define COPY_FLAGS ATTR_MODE | ATTR_UID | ATTR_GID | ATTR_SIZE
++
++/*
++ * mini_fo filestates
++ */
++#define MODIFIED       1
++#define UNMODIFIED     2
++#define CREATED        3
++#define DEL_REWRITTEN  4
++#define DELETED        5
++#define NON_EXISTANT   6
++
++/* fist file systems superblock magic */
++# define MINI_FO_SUPER_MAGIC 0xf15f
++
++/*
++ * STRUCTURES:
++ */
++
++/* mini_fo inode data in memory */
++struct mini_fo_inode_info {
++	inode_t *wii_inode;
++	inode_t *wii_inode2; /* pointer to storage inode */
++
++	/* META-data lists */
++	/* deleted list, ex wol */
++	struct list_head deleted_list;
++	int deleted_list_size;
++
++	/* renamed list */
++	struct list_head renamed_list;
++	int renamed_list_size;
++
++	/* add other lists here ... */
++};
++
++/* mini_fo dentry data in memory */
++struct mini_fo_dentry_info {
++	dentry_t *wdi_dentry;
++	dentry_t *wdi_dentry2; /* pointer to  storage dentry */
++	unsigned int state;  /* state of the mini_fo dentry */
++};
++
++
++/* mini_fo super-block data in memory */
++struct mini_fo_sb_info {
++	super_block_t *wsi_sb, *wsi_sb2; /* mk: might point to the same sb */
++	struct vfsmount *hidden_mnt, *hidden_mnt2;
++	dentry_t *base_dir_dentry;
++	dentry_t *storage_dir_dentry;
++	;
++};
++
++/* readdir_data, readdir helper struct */
++struct readdir_data {
++	struct list_head ndl_list; /* linked list head ptr */
++	int ndl_size; /* list size */
++	int sto_done; /* flag to show that the storage dir entries have
++		       * all been read an now follow base entries */
++};
++
++/* file private data. */
++struct mini_fo_file_info {
++	struct file *wfi_file;
++	struct file *wfi_file2; /* pointer to storage file */
++	struct readdir_data rd;
++};
++
++/* struct ndl_entry */
++struct ndl_entry {
++	struct list_head list;
++	char *name;
++	int len;
++};
++
++/********************************
++ *  META-data structures
++ ********************************/
++
++/* deleted entry */
++struct deleted_entry {
++	struct list_head list;
++	char *name;
++	int len;
++};
++
++/* renamed entry */
++struct renamed_entry {
++	struct list_head list;
++	char *old_name;     /* old directory with full path */
++	int old_len;        /* length of above string */
++	char *new_name;     /* new directory name */
++	int new_len;        /* length of above string */
++};
++
++/* attr_change entry */
++struct attr_change_entry {
++	struct list_head list;
++	char *name;
++	int len;
++};
++
++/* link entry */
++struct link_entry {
++	struct list_head list;
++	int links_moved;
++	int inum_base;
++	int inum_sto;
++	char *weird_name;
++	int weird_name_len;
++};
++
++
++/* Some other stuff required for mini_fo_filldir64, copied from
++ * fs/readdir.c
++ */
++
++#define ROUND_UP64(x) (((x)+sizeof(u64)-1) & ~(sizeof(u64)-1))
++#define NAME_OFFSET(de) ((int) ((de)->d_name - (char *) (de)))
++
++
++struct linux_dirent64 {
++        u64             d_ino;
++        s64             d_off;
++        unsigned short  d_reclen;
++        unsigned char   d_type;
++        char            d_name[0];
++};
++
++
++struct getdents_callback64 {
++        struct linux_dirent64 * current_dir;
++        struct linux_dirent64 * previous;
++        int count;
++        int error;
++};
++
++struct linux_dirent {
++	unsigned long   d_ino;
++	unsigned long   d_off;
++	unsigned short  d_reclen;
++	char            d_name[1];
++};
++
++struct getdents_callback {
++	struct linux_dirent * current_dir;
++	struct linux_dirent * previous;
++	int count;
++	int error;
++};
++
++
++/*
++ * MACROS:
++ */
++
++/* file TO private_data */
++# define ftopd(file) ((struct mini_fo_file_info *)((file)->private_data))
++# define __ftopd(file) ((file)->private_data)
++/* file TO hidden_file */
++# define ftohf(file) ((ftopd(file))->wfi_file)
++# define ftohf2(file) ((ftopd(file))->wfi_file2)
++
++/* inode TO private_data */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++# define itopd(ino) ((struct mini_fo_inode_info *)(ino)->i_private)
++# define __itopd(ino) ((ino)->i_private)
++#else
++# define itopd(ino) ((struct mini_fo_inode_info *)(ino)->u.generic_ip)
++# define __itopd(ino) ((ino)->u.generic_ip)
++#endif
++/* inode TO hidden_inode */
++# define itohi(ino) (itopd(ino)->wii_inode)
++# define itohi2(ino) (itopd(ino)->wii_inode2)
++
++/* superblock TO private_data */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++# define stopd(super) ((struct mini_fo_sb_info *)(super)->s_fs_info)
++# define __stopd(super) ((super)->s_fs_info)
++#else
++# define stopd(super) ((struct mini_fo_sb_info *)(super)->u.generic_sbp)
++# define __stopd(super) ((super)->u.generic_sbp)
++#endif
++
++/* unused? # define vfs2priv stopd */
++/* superblock TO hidden_superblock */
++
++# define stohs(super) (stopd(super)->wsi_sb)
++# define stohs2(super) (stopd(super)->wsi_sb2)
++
++/* dentry TO private_data */
++# define dtopd(dentry) ((struct mini_fo_dentry_info *)(dentry)->d_fsdata)
++# define __dtopd(dentry) ((dentry)->d_fsdata)
++/* dentry TO hidden_dentry */
++# define dtohd(dent) (dtopd(dent)->wdi_dentry)
++# define dtohd2(dent) (dtopd(dent)->wdi_dentry2)
++
++/* dentry to state */
++# define dtost(dent) (dtopd(dent)->state)
++# define sbt(sb) ((sb)->s_type->name)
++
++#define IS_WRITE_FLAG(flag) (flag & (O_RDWR | O_WRONLY | O_APPEND))
++#define IS_COPY_FLAG(flag) (flag & (COPY_FLAGS))
++
++/* macros to simplify non-SCA code */
++#  define MALLOC_PAGE_POINTERS(hidden_pages, num_hidden_pages)
++#  define MALLOC_PAGEDATA_POINTERS(hidden_pages_data, num_hidden_pages)
++#  define FREE_PAGE_POINTERS(hidden_pages, num)
++#  define FREE_PAGEDATA_POINTERS(hidden_pages_data, num)
++#  define FOR_EACH_PAGE
++#  define CURRENT_HIDDEN_PAGE hidden_page
++#  define CURRENT_HIDDEN_PAGEDATA hidden_page_data
++#  define CURRENT_HIDDEN_PAGEINDEX page->index
++
++/*
++ * EXTERNALS:
++ */
++extern struct file_operations mini_fo_main_fops;
++extern struct file_operations mini_fo_dir_fops;
++extern struct inode_operations mini_fo_main_iops;
++extern struct inode_operations mini_fo_dir_iops;
++extern struct inode_operations mini_fo_symlink_iops;
++extern struct super_operations mini_fo_sops;
++extern struct dentry_operations mini_fo_dops;
++extern struct vm_operations_struct mini_fo_shared_vmops;
++extern struct vm_operations_struct mini_fo_private_vmops;
++extern struct address_space_operations mini_fo_aops;
++
++#if 0 /* unused by mini_fo */
++extern int mini_fo_interpose(dentry_t *hidden_dentry, dentry_t *this_dentry, super_block_t *sb, int flag);
++#if defined(FIST_FILTER_DATA) || defined(FIST_FILTER_SCA)
++extern page_t *mini_fo_get1page(file_t *file, int index);
++extern int mini_fo_fill_zeros(file_t *file, page_t *page, unsigned from);
++# endif /* FIST_FILTER_DATA || FIST_FILTER_SCA */
++
++
++#  define mini_fo_hidden_dentry(d) __mini_fo_hidden_dentry(__FILE__,__FUNCTION__,__LINE__,(d))
++#  define mini_fo_hidden_sto_dentry(d) __mini_fo_hidden_sto_dentry(__FILE__,__FUNCTION__,__LINE__,(d))
++
++extern dentry_t *__mini_fo_hidden_dentry(char *file, char *func, int line, dentry_t *this_dentry);
++extern dentry_t *__mini_fo_hidden_sto_dentry(char *file, char *func, int line, dentry_t *this_dentry);
++
++extern int mini_fo_read_file(const char *filename, void *buf, int len);
++extern int mini_fo_write_file(const char *filename, void *buf, int len);
++extern dentry_t *fist_lookup(dentry_t *dir, const char *name, vnode_t **out, uid_t uid, gid_t gid);
++#endif /* unused by mini_fo */
++
++/* state transition functions */
++extern int nondir_unmod_to_mod(dentry_t *dentry, int cp_flag);
++extern int nondir_del_rew_to_del(dentry_t *dentry);
++extern int nondir_creat_to_del(dentry_t *dentry);
++extern int nondir_mod_to_del(dentry_t *dentry);
++extern int nondir_unmod_to_del(dentry_t *dentry);
++
++extern int dir_unmod_to_mod(dentry_t *dentry);
++
++/* rename specials */
++extern int rename_directory(inode_t *old_dir, dentry_t *old_dentry, inode_t *new_dir, dentry_t *new_dentry);
++extern int rename_nondir(inode_t *old_dir, dentry_t *old_dentry, inode_t *new_dir, dentry_t *new_dentry);
++
++/* misc stuff */
++extern int mini_fo_tri_interpose(dentry_t *hidden_dentry,
++				 dentry_t *hidden_sto_dentry,
++				 dentry_t *dentry,
++				 super_block_t *sb, int flag);
++
++extern int mini_fo_cp_cont(dentry_t *tgt_dentry, struct vfsmount *tgt_mnt,
++			   dentry_t *src_dentry, struct vfsmount *src_mnt);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++extern int mini_fo_create(inode_t *dir, dentry_t *dentry, int mode, struct nameidata *nd);
++
++extern int create_sto_nod(dentry_t *dentry, int mode, dev_t dev);
++extern int create_sto_reg_file(dentry_t *dentry, int mode, struct nameidata *nd);
++#else
++extern int mini_fo_create(inode_t *dir, dentry_t *dentry, int mode);
++
++extern int create_sto_nod(dentry_t *dentry, int mode, int dev);
++extern int create_sto_reg_file(dentry_t *dentry, int mode);
++#endif
++
++extern int create_sto_dir(dentry_t *dentry, int mode);
++
++extern int exists_in_storage(dentry_t *dentry);
++extern int is_mini_fo_existant(dentry_t *dentry);
++extern int get_neg_sto_dentry(dentry_t *dentry);
++extern int build_sto_structure(dentry_t *dir, dentry_t *dentry);
++extern int get_mini_fo_bpath(dentry_t *dentry, char **bpath, int *bpath_len);
++extern dentry_t *bpath_walk(super_block_t *sb, char *bpath);
++extern int bpath_put(dentry_t *dentry);
++
++/* check_mini_fo types functions */
++extern int check_mini_fo_dentry(dentry_t *dentry);
++extern int check_mini_fo_file(file_t *file);
++extern int check_mini_fo_inode(inode_t *inode);
++
++/* General meta functions, can be called from outside of meta.c */
++extern int meta_build_lists(dentry_t *dentry);
++extern int meta_put_lists(dentry_t *dentry);
++extern int __meta_put_lists(inode_t *inode);
++
++extern int meta_add_d_entry(dentry_t *dentry, const char *name, int len);
++extern int meta_add_r_entry(dentry_t *dentry,
++			    const char *old_name, int old_len,
++			    const char *new_name, int new_len);
++
++extern int meta_remove_r_entry(dentry_t *dentry, const char *name, int len);
++
++extern int meta_check_d_entry(dentry_t *dentry, const char *name, int len);
++extern int __meta_check_d_entry(inode_t *inode, const char *name, int len);
++
++extern char* meta_check_r_entry(dentry_t *dentry, const char *name, int len);
++extern char* __meta_check_r_entry(inode_t *inode, const char *name, int len);
++extern int meta_is_r_entry(dentry_t *dentry, const char *name, int len);
++extern int __meta_is_r_entry(inode_t *inode, const char *name, int len);
++
++/* Specific meta functions, should be called only inside meta.c */
++extern int __meta_put_d_list(inode_t *inode);
++extern int __meta_put_r_list(inode_t *inode);
++
++extern int meta_list_add_d_entry(dentry_t *dentry,
++				 const char *name, int len);
++extern int meta_list_add_r_entry(dentry_t *dentry,
++				 const char *old_name, int old_len,
++				 const char *new_name, int new_len);
++
++extern int meta_list_remove_r_entry(dentry_t *dentry,
++				    const char *name, int len);
++
++extern int __meta_list_remove_r_entry(inode_t *inode,
++				      const char *name, int len);
++
++extern int meta_write_d_entry(dentry_t *dentry, const char *name, int len);
++extern int meta_write_r_entry(dentry_t *dentry,
++			      const char *old_name, int old_len,
++			      const char *new_name, int new_len);
++
++extern int meta_sync_lists(dentry_t *dentry);
++extern int meta_sync_d_list(dentry_t *dentry, int app_flag);
++extern int meta_sync_r_list(dentry_t *dentry, int app_flag);
++
++/* ndl stuff */
++extern int ndl_add_entry(struct readdir_data *rd, const char *name, int len);
++extern void ndl_put_list(struct readdir_data *rd);
++extern int ndl_check_entry(struct readdir_data *rd,
++			   const char *name, int len);
++
++
++# define copy_inode_size(dst, src) \
++    dst->i_size = src->i_size; \
++    dst->i_blocks = src->i_blocks;
++
++static inline void
++fist_copy_attr_atime(inode_t *dest, const inode_t *src)
++{
++	ASSERT(dest != NULL);
++	ASSERT(src != NULL);
++	dest->i_atime = src->i_atime;
++}
++static inline void
++fist_copy_attr_times(inode_t *dest, const inode_t *src)
++{
++	ASSERT(dest != NULL);
++	ASSERT(src != NULL);
++	dest->i_atime = src->i_atime;
++	dest->i_mtime = src->i_mtime;
++	dest->i_ctime = src->i_ctime;
++}
++static inline void
++fist_copy_attr_timesizes(inode_t *dest, const inode_t *src)
++{
++	ASSERT(dest != NULL);
++	ASSERT(src != NULL);
++	dest->i_atime = src->i_atime;
++	dest->i_mtime = src->i_mtime;
++	dest->i_ctime = src->i_ctime;
++	copy_inode_size(dest, src);
++}
++static inline void
++fist_copy_attr_all(inode_t *dest, const inode_t *src)
++{
++	ASSERT(dest != NULL);
++	ASSERT(src != NULL);
++	dest->i_mode = src->i_mode;
++	dest->i_nlink = src->i_nlink;
++	dest->i_uid = src->i_uid;
++	dest->i_gid = src->i_gid;
++	dest->i_rdev = src->i_rdev;
++	dest->i_atime = src->i_atime;
++	dest->i_mtime = src->i_mtime;
++	dest->i_ctime = src->i_ctime;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)
++	dest->i_blksize = src->i_blksize;
++#endif
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,12)
++	dest->i_blkbits = src->i_blkbits;
++# endif /* linux 2.4.12 and newer */
++	copy_inode_size(dest, src);
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	dest->i_attr_flags = src->i_attr_flags;
++#else
++	dest->i_flags = src->i_flags;
++#endif
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++/* copied from linux/fs.h */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++static inline void double_lock(struct dentry *d1, struct dentry *d2)
++{
++	struct mutex *m1 = &d1->d_inode->i_mutex;
++	struct mutex *m2 = &d2->d_inode->i_mutex;
++	if (m1 != m2) {
++		if ((unsigned long) m1 < (unsigned long) m2) {
++			struct mutex *tmp = m2;
++			m2 = m1; m1 = tmp;
++		}
++		mutex_lock(m1);
++	}
++	mutex_lock(m2);
++}
++
++static inline void double_unlock(struct dentry *d1, struct dentry *d2)
++{
++	struct mutex *m1 = &d1->d_inode->i_mutex;
++	struct mutex *m2 = &d2->d_inode->i_mutex;
++	mutex_unlock(m1);
++	if (m1 != m2)
++		mutex_unlock(m2);
++	dput(d1);
++	dput(d2);
++}
++
++#else
++static inline void double_down(struct semaphore *s1, struct semaphore *s2)
++{
++        if (s1 != s2) {
++                if ((unsigned long) s1 < (unsigned long) s2) {
++                        struct semaphore *tmp = s2;
++                        s2 = s1; s1 = tmp;
++                }
++                down(s1);
++        }
++        down(s2);
++}
++
++static inline void double_up(struct semaphore *s1, struct semaphore *s2)
++{
++        up(s1);
++        if (s1 != s2)
++                up(s2);
++}
++
++static inline void double_lock(struct dentry *d1, struct dentry *d2)
++{
++        double_down(&d1->d_inode->i_sem, &d2->d_inode->i_sem);
++}
++
++static inline void double_unlock(struct dentry *d1, struct dentry *d2)
++{
++        double_up(&d1->d_inode->i_sem,&d2->d_inode->i_sem);
++        dput(d1);
++        dput(d2);
++}
++#endif   /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) */
++#endif  /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) */
++#endif /* __KERNEL__ */
++
++/*
++ * Definitions for user and kernel code
++ */
++
++/* ioctls */
++
++#endif	/* not __MINI_FO_H_ */
+--- /dev/null
++++ b/fs/mini_fo/mini_fo-merge
+@@ -0,0 +1,180 @@
++#!/bin/bash
++#
++# Copyright (C) 2005 Markus Klotzbuecher <mk@creamnet.de>
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License
++# as published by the Free Software Foundation; either version
++# 2 of the License, or (at your option) any later version.
++#
++
++BASE=
++STO=
++HELP=
++DRYRUN=
++VERBOSE=
++TMP="/tmp/"
++META_NAME="META_dAfFgHE39ktF3HD2sr"
++SKIP_DEL_LIST="skip-delete-list.mini_fo-merge"
++
++COMMAND=
++exec_command()
++{
++    if [ x$DRYRUN == "xset" ]; then
++	echo "  would run: $COMMAND"
++    elif ! [ x$DRYRUN == "xset" ]; then
++	if [ x$VERBOSE == "xset" ]; then
++	    echo "  running: $COMMAND"
++	fi
++	eval $COMMAND
++    fi
++}
++
++usage()
++{
++cat <<EOF
++
++USAGE: $0 -b <base dir> -s <storage dir>
++Version 0.1
++
++This script merges the contents of a mini_fo storage file system back
++to the base file system.
++
++!!! Warning: This will modify the base filesystem and can destroy data
++             if used wrongly.
++
++Options:
++     -b <base dir>
++          the directory of the base file system.
++
++     -s <storage dir>
++          the directory of the storage file system.
++
++     -d   dry run, will not change anything and print the commands that
++          would be executed.
++
++     -t   tmp dir for storing temporary file. default: $TMP
++
++     -v   show what operations are performed.
++
++     -h   displays this message.
++
++EOF
++}
++
++# parse parameters
++while getopts hdvt:b:s: OPTS
++  do
++  case $OPTS in
++      h)  HELP="set";;
++      d)  DRYRUN="set";;
++      v)  VERBOSE="set";;
++      b)  BASE="$OPTARG";;
++      s)  STO="$OPTARG";;
++      t)  TMP="$OPTARG";;
++      ?)  usage
++	  exit 1;;
++  esac
++done
++
++if [ "x$HELP" == "xset" ]; then
++    usage
++    exit -1
++fi
++
++if ! [ -d "$BASE" ] || ! [ -d "$STO" ]; then
++    echo -e "$0:\n Error, -s and/or -b argument missing. type $0 -h for help."
++    exit -1;
++fi
++
++# get full paths
++pushd $STO; STO=`pwd`; popd
++pushd $BASE; BASE=`pwd`; popd
++TMP=${TMP%/}
++
++
++cat<<EOF
++###############################################################################
++# mini_fo-merge
++#
++# base dir:       $BASE
++# storage dir:    $STO
++# meta filename:  $META_NAME
++# dry run:        $DRYRUN
++# verbose:        $VERBOSE
++# tmp files:      $TMP
++###############################################################################
++
++EOF
++
++rm $TMP/$SKIP_DEL_LIST
++
++# first process all renamed dirs
++echo "Merging renamed directories..."
++pushd $STO &> /dev/null
++find . -name $META_NAME -type f -print0  | xargs -0 -e grep  -e '^R ' | tr -s ':R' ' ' | while read ENTRY; do
++    echo "entry: $ENTRY"
++    META_FILE=`echo $ENTRY | cut -d ' ' -f 1`
++    OLD_B_DIR=`echo $ENTRY | cut -d ' ' -f 2 | sed -e 's/\///'`
++    NEW_NAME=`echo $ENTRY | cut -d ' ' -f 3`
++    NEW_B_DIR=`echo $META_FILE | sed -e "s/$META_NAME/$NEW_NAME/" | sed -e 's/^\.\///'`
++    echo "META_FILE: $META_FILE"
++    echo "OLD_B_DIR: $OLD_B_DIR"
++    echo "NEW_NAME: $NEW_NAME"
++    echo  "NEW_B_DIR: $NEW_B_DIR"
++
++    pushd $BASE &> /dev/null
++    # remove an existing dir in storage
++    COMMAND="rm -rf $NEW_B_DIR"; exec_command
++    COMMAND="cp -R $OLD_B_DIR $NEW_B_DIR"; exec_command
++    echo ""
++    popd &> /dev/null
++
++    # remember this dir to exclude it from deleting later
++    echo $NEW_B_DIR >> $TMP/$SKIP_DEL_LIST
++done
++
++# delete all whiteouted files from base
++echo -e "\nDeleting whiteout'ed files from base file system..."
++find . -name $META_NAME -type f -print0  | xargs -0 -e grep  -e '^D ' | sed -e 's/:D//' | while read ENTRY; do
++    META_FILE=`echo $ENTRY | cut -d ' ' -f 1`
++    DEL_NAME=`echo $ENTRY | cut -d ' ' -f 2`
++    DEL_FILE=`echo $META_FILE | sed -e "s/$META_NAME/$DEL_NAME/" | sed -e 's/^\.\///'`
++    grep -x $DEL_FILE $TMP/$SKIP_DEL_LIST &> /dev/null
++    if [ $? -ne 0 ]; then
++	pushd $BASE &> /dev/null
++	COMMAND="rm -rf $DEL_FILE"; exec_command
++	popd &> /dev/null
++    else
++	echo "  excluding: $DEL_FILE as in skip-del-list."
++    fi
++done
++
++# create all dirs and update permissions
++echo -e "\nSetting up directory structures in base file system..."
++find . -type d | sed -e 's/^\.\///' | while read DIR; do
++    PERMS=`stat -c %a $DIR`
++    DIR_UID=`stat -c %u $DIR`
++    DIR_GID=`stat -c %g $DIR`
++    pushd $BASE &> /dev/null
++    if ! [ -d $DIR ]; then
++	COMMAND="mkdir -p $DIR"; exec_command
++    fi
++    COMMAND="chmod $PERMS $DIR"; exec_command
++    COMMAND="chown $DIR_UID:$DIR_GID $DIR"; exec_command
++    popd &> /dev/null
++done
++
++# merge all non-directory files
++echo -e "\nMerging all non-directory files...."
++for i in b c p f l s; do
++    find . -type $i | sed -e 's/^\.\///' | grep -v "$META_NAME" | while read FILE; do
++	pushd $BASE #&> /dev/null
++	COMMAND="cp -df $STO/$FILE $BASE/$FILE"; exec_command
++	popd &> /dev/null
++    done
++done
++popd &> /dev/null
++
++#rm $TMP/$SKIP_DEL_LIST
++
++echo "Done!"
+--- /dev/null
++++ b/fs/mini_fo/mini_fo-overlay
+@@ -0,0 +1,130 @@
++#!/bin/bash
++#
++# Copyright (C) 2005 Markus Klotzbuecher <mk@creamnet.de>
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License
++# as published by the Free Software Foundation; either version
++# 2 of the License, or (at your option) any later version.
++#
++
++HELP=
++SUFF=
++MNTP=
++MNT_DIR="/mnt"
++STO=
++STO_DIR="/tmp"
++BASE=
++
++usage()
++{
++cat <<EOF
++
++Usage: $0 [-s suffix] [-d sto_dir_dir] [-m mount point] base_dir
++Version 0.1
++
++This script overlays the given base directory using the mini_fo file
++system. If only the base directory base_dir is given, $0
++will use a storage directory called "sto-<base_dir_name>" in $STO_DIR,
++and mount point "mini_fo-<base_dir_dir>" in $MNT_DIR.
++
++Options:
++     -s <suffix>
++          add given suffix to storage directory and the mount
++          point. This is usefull for overlaying one base directory
++          several times and avoiding conflicts with storage directory
++          names and mount points.
++
++     -d <sto_dir_dir>
++          change the directory in which the storage directory will be
++          created (default is currently "$STO_DIR".
++
++     -m <mount point>
++          use an alternative directory to create the mini_fo
++          mountpoint (default is currently "$MNT_DIR".
++
++     -h   displays this message.
++
++EOF
++exit 1;
++}
++
++while getopts hm:s:d: OPTS
++  do
++  case $OPTS in
++      s)  SUFF="$OPTARG";;
++      d)  STO_DIR="$OPTARG";;
++      m)  MNT_DIR="$OPTARG";;
++      h)  HELP="set";;
++      ?)  usage
++	  exit 1;;
++  esac
++done
++shift $(($OPTIND - 1))
++
++BASE="$1"
++
++if [ "x$HELP" == "xset" ]; then
++    usage
++    exit -1
++fi
++
++# fix suffix
++if [ "x$SUFF" != "x" ]; then
++    SUFF="-$SUFF"
++fi
++
++# kill trailing slashes
++MNT_DIR=${MNT_DIR%/}
++STO_DIR=${STO_DIR%/}
++BASE=${BASE%/}
++
++
++if ! [ -d "$BASE" ]; then
++    echo "invalid base dir $BASE, run $0 -h for help."
++    exit -1
++fi
++
++# check opts
++if ! [ -d "$MNT_DIR" ]; then
++    echo "invalid mount dir $MNT_DIR, run $0 -h for help."
++    exit -1
++fi
++
++if ! [ -d "$STO_DIR" ]; then
++    echo "invalid sto_dir_dir $STO_DIR, run $0 -h for help."
++    exit -1
++fi
++
++MNTP="$MNT_DIR/mini_fo-`basename $BASE`$SUFF"
++STO="$STO_DIR/sto-`basename $BASE`$SUFF"
++
++# create the mount point if it doesn't exist
++mkdir -p $MNTP
++if [ $? -ne 0 ]; then
++    echo "Error, failed to create mount point $MNTP"
++fi
++
++mkdir -p $STO
++if [ $? -ne 0 ]; then
++    echo "Error, failed to create storage dir $STO"
++fi
++
++# check if fs is already mounted
++mount | grep mini_fo | grep $MNTP &> /dev/null
++if [ $? -eq 0 ]; then
++    echo "Error, existing mini_fo mount at $MNTP."
++    exit -1
++fi
++
++mount | grep mini_fo | grep $STO &> /dev/null
++if [ $? -eq 0 ]; then
++    echo "Error, $STO seems to be used already."
++    exit -1
++fi
++
++# mount
++mount -t mini_fo -o base=$BASE,sto=$STO $BASE $MNTP
++
++if [ $? -ne 0 ]; then
++    echo "Error, mounting failed, maybe no permisson to mount?"
++fi
+--- /dev/null
++++ b/fs/mini_fo/mmap.c
+@@ -0,0 +1,637 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif /* HAVE_CONFIG_H */
++
++#include "fist.h"
++#include "mini_fo.h"
++
++
++#ifdef FIST_COUNT_WRITES
++/* for counting writes in the middle vs. regular writes */
++unsigned long count_writes = 0, count_writes_middle = 0;
++#endif /* FIST_COUNT_WRITES */
++
++/* forward declaration of commit write and prepare write */
++STATIC int mini_fo_commit_write(file_t *file, page_t *page, unsigned from, unsigned to);
++STATIC int mini_fo_prepare_write(file_t *file, page_t *page, unsigned from, unsigned to);
++
++
++/*
++ * Function for handling creation of holes when lseek-ing past the
++ * end of the file and then writing some data.
++ */
++int
++mini_fo_fill_zeros(file_t* file, page_t *page, unsigned from)
++{
++	int err = 0;
++	dentry_t *dentry = file->f_dentry;
++	inode_t *inode = dentry->d_inode;
++	page_t *tmp_page;
++	int index;
++
++	print_entry_location();
++
++	for (index = inode->i_size >> PAGE_CACHE_SHIFT; index < page->index; index++) {
++		tmp_page = mini_fo_get1page(file, index);
++		if (IS_ERR(tmp_page)) {
++			err = PTR_ERR(tmp_page);
++			goto out;
++		}
++
++		/*
++		 * zero out rest of the contents of the page between the appropriate
++		 * offsets.
++		 */
++		memset((char*)page_address(tmp_page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, PAGE_CACHE_SIZE - (inode->i_size & ~PAGE_CACHE_MASK));
++
++		if (! (err = mini_fo_prepare_write(file, tmp_page, 0, PAGE_CACHE_SIZE)))
++			err = mini_fo_commit_write(file, tmp_page, 0, PAGE_CACHE_SIZE);
++
++		page_cache_release(tmp_page);
++		if (err < 0)
++			goto out;
++		if (current->need_resched)
++			schedule();
++	}
++
++	/* zero out appropriate parts of last page */
++
++	/*
++	 * if the encoding type is block, then adjust the 'from' (where the
++	 * zeroing will start) offset appropriately
++	 */
++	from = from & (~(FIST_ENCODING_BLOCKSIZE - 1));
++
++	if ((from - (inode->i_size & ~PAGE_CACHE_MASK)) > 0) {
++
++		memset((char*)page_address(page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, from - (inode->i_size & ~PAGE_CACHE_MASK));
++		if (! (err = mini_fo_prepare_write(file, page, 0, PAGE_CACHE_SIZE)))
++			err = mini_fo_commit_write(file, page, 0, PAGE_CACHE_SIZE);
++
++		if (err < 0)
++			goto out;
++		if (current->need_resched)
++			schedule();
++	}
++
++ out:
++	print_exit_status(err);
++	return err;
++}
++
++
++
++STATIC int
++mini_fo_writepage(page_t *page)
++{
++	int err = -EIO;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	page_t *hidden_page;
++	char *kaddr, *hidden_kaddr;
++
++	print_entry_location();
++
++	inode = page->mapping->host;
++	hidden_inode = itohi(inode);
++
++	/*
++	 * writepage is called when shared mmap'ed files need to write
++	 * their pages, while prepare/commit_write are called from the
++	 * non-paged write() interface.  (However, in 2.3 the two interfaces
++	 * share the same cache, while in 2.2 they didn't.)
++	 *
++	 * So we pretty much have to duplicate much of what commit_write does.
++	 */
++
++	/* find lower page (returns a locked page) */
++	hidden_page = grab_cache_page(hidden_inode->i_mapping, page->index);
++	if (!hidden_page)
++		goto out;
++
++	/* get page address, and encode it */
++	kaddr = (char *) kmap(page);
++	hidden_kaddr = (char*) kmap(hidden_page);
++	mini_fo_encode_block(kaddr, hidden_kaddr, PAGE_CACHE_SIZE, inode, inode->i_sb, page->index);
++	/* if encode_block could fail, then return error */
++	kunmap(page);
++	kunmap(hidden_page);
++
++	/* call lower writepage (expects locked page) */
++	err = hidden_inode->i_mapping->a_ops->writepage(hidden_page);
++
++	/*
++	 * update mtime and ctime of lower level file system
++	 * mini_fo' mtime and ctime are updated by generic_file_write
++	 */
++	hidden_inode->i_mtime = hidden_inode->i_ctime = CURRENT_TIME;
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,1)
++	UnlockPage(hidden_page);	/* b/c grab_cache_page locked it */
++# endif /* kernel older than 2.4.1 */
++	page_cache_release(hidden_page); /* b/c grab_cache_page increased refcnt */
++
++	if (err)
++		ClearPageUptodate(page);
++	else
++		SetPageUptodate(page);
++ out:
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,1)
++	UnlockPage(page);
++# endif /* kernel 2.4.1 and newer */
++	print_exit_status(err);
++	return err;
++}
++
++
++/*
++ * get one page from cache or lower f/s, return error otherwise.
++ * returns unlocked, up-to-date page (if ok), with increased refcnt.
++ */
++page_t *
++mini_fo_get1page(file_t *file, int index)
++{
++	page_t *page;
++	dentry_t *dentry;
++	inode_t *inode;
++	struct address_space *mapping;
++	int err;
++
++	print_entry_location();
++
++	dentry = file->f_dentry; /* CPW: Moved below print_entry_location */
++	inode = dentry->d_inode;
++	mapping = inode->i_mapping;
++
++	fist_dprint(8, "%s: read page index %d pid %d\n", __FUNCTION__, index, current->pid);
++	if (index < 0) {
++		printk("%s BUG: index=%d\n", __FUNCTION__, index);
++		page = ERR_PTR(-EIO);
++		goto out;
++	}
++	page = read_cache_page(mapping,
++			       index,
++			       (filler_t *) mapping->a_ops->readpage,
++			       (void *) file);
++	if (IS_ERR(page))
++		goto out;
++	wait_on_page(page);
++	if (!Page_Uptodate(page)) {
++		lock_page(page);
++		err = mapping->a_ops->readpage(file, page);
++		if (err) {
++			page = ERR_PTR(err);
++			goto out;
++		}
++		wait_on_page(page);
++		if (!Page_Uptodate(page)) {
++			page = ERR_PTR(-EIO);
++			goto out;
++		}
++	}
++
++ out:
++	print_exit_pointer(page);
++	return page;
++}
++
++
++/*
++ * get one page from cache or lower f/s, return error otherwise.
++ * similar to get1page, but doesn't guarantee that it will return
++ * an unlocked page.
++ */
++page_t *
++mini_fo_get1page_cached(file_t *file, int index)
++{
++	page_t *page;
++	dentry_t *dentry;
++	inode_t *inode;
++	struct address_space *mapping;
++	int err;
++
++	print_entry_location();
++
++	dentry = file->f_dentry; /* CPW: Moved below print_entry_location */
++	inode = dentry->d_inode;
++	mapping = inode->i_mapping;
++
++	fist_dprint(8, "%s: read page index %d pid %d\n", __FUNCTION__, index, current->pid);
++	if (index < 0) {
++		printk("%s BUG: index=%d\n", __FUNCTION__, index);
++		page = ERR_PTR(-EIO);
++		goto out;
++	}
++	page = read_cache_page(mapping,
++			       index,
++			       (filler_t *) mapping->a_ops->readpage,
++			       (void *) file);
++	if (IS_ERR(page))
++		goto out;
++
++ out:
++	print_exit_pointer(page);
++	return page;
++}
++
++
++/*
++ * readpage is called from generic_page_read and the fault handler.
++ * If your file system uses generic_page_read for the read op, it
++ * must implement readpage.
++ *
++ * Readpage expects a locked page, and must unlock it.
++ */
++STATIC int
++mini_fo_do_readpage(file_t *file, page_t *page)
++{
++	int err = -EIO;
++	dentry_t *dentry;
++	file_t *hidden_file = NULL;
++	dentry_t *hidden_dentry;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	char *page_data;
++	page_t *hidden_page;
++	char *hidden_page_data;
++	int real_size;
++
++	print_entry_location();
++
++	dentry = file->f_dentry; /* CPW: Moved below print_entry_location */
++	if (ftopd(file) != NULL)
++		hidden_file = ftohf(file);
++	hidden_dentry = dtohd(dentry);
++	inode = dentry->d_inode;
++	hidden_inode = itohi(inode);
++
++	fist_dprint(7, "%s: requesting page %d from file %s\n", __FUNCTION__, page->index, dentry->d_name.name);
++
++	MALLOC_PAGE_POINTERS(hidden_pages, num_hidden_pages);
++	MALLOC_PAGEDATA_POINTERS(hidden_pages_data, num_hidden_pages);
++	FOR_EACH_PAGE
++		CURRENT_HIDDEN_PAGE = NULL;
++
++	/* find lower page (returns a locked page) */
++	FOR_EACH_PAGE {
++		fist_dprint(8, "%s: Current page index = %d\n", __FUNCTION__, CURRENT_HIDDEN_PAGEINDEX);
++		CURRENT_HIDDEN_PAGE = read_cache_page(hidden_inode->i_mapping,
++						      CURRENT_HIDDEN_PAGEINDEX,
++						      (filler_t *) hidden_inode->i_mapping->a_ops->readpage,
++						      (void *) hidden_file);
++		if (IS_ERR(CURRENT_HIDDEN_PAGE)) {
++			err = PTR_ERR(CURRENT_HIDDEN_PAGE);
++			CURRENT_HIDDEN_PAGE = NULL;
++			goto out_release;
++		}
++	}
++
++	/*
++	 * wait for the page data to show up
++	 * (signaled by readpage as unlocking the page)
++	 */
++	FOR_EACH_PAGE {
++		wait_on_page(CURRENT_HIDDEN_PAGE);
++		if (!Page_Uptodate(CURRENT_HIDDEN_PAGE)) {
++			/*
++			 * call readpage() again if we returned from wait_on_page with a
++			 * page that's not up-to-date; that can happen when a partial
++			 * page has a few buffers which are ok, but not the whole
++			 * page.
++			 */
++			lock_page(CURRENT_HIDDEN_PAGE);
++			err = hidden_inode->i_mapping->a_ops->readpage(hidden_file,
++								       CURRENT_HIDDEN_PAGE);
++			if (err) {
++				CURRENT_HIDDEN_PAGE = NULL;
++				goto out_release;
++			}
++			wait_on_page(CURRENT_HIDDEN_PAGE);
++			if (!Page_Uptodate(CURRENT_HIDDEN_PAGE)) {
++				err = -EIO;
++				goto out_release;
++			}
++		}
++	}
++
++	/* map pages, get their addresses */
++	page_data = (char *) kmap(page);
++	FOR_EACH_PAGE
++		CURRENT_HIDDEN_PAGEDATA = (char *) kmap(CURRENT_HIDDEN_PAGE);
++
++	/* if decode_block could fail, then return error */
++	err = 0;
++	real_size = hidden_inode->i_size - (page->index << PAGE_CACHE_SHIFT);
++	if (real_size <= 0)
++		memset(page_data, 0, PAGE_CACHE_SIZE);
++	else if (real_size < PAGE_CACHE_SIZE) {
++		mini_fo_decode_block(hidden_page_data, page_data, real_size, inode, inode->i_sb, page->index);
++		memset(page_data + real_size, 0, PAGE_CACHE_SIZE - real_size);
++	} else
++		mini_fo_decode_block(hidden_page_data, page_data, PAGE_CACHE_SIZE, inode, inode->i_sb, page->index);
++
++	FOR_EACH_PAGE
++		kunmap(CURRENT_HIDDEN_PAGE);
++	kunmap(page);
++
++ out_release:
++	FOR_EACH_PAGE
++		if (CURRENT_HIDDEN_PAGE)
++			page_cache_release(CURRENT_HIDDEN_PAGE); /* undo read_cache_page */
++
++	FREE_PAGE_POINTERS(hidden_pages, num_hidden_pages);
++	FREE_PAGEDATA_POINTERS(hidden_pages_data, num_hidden_pages);
++
++ out:
++	if (err == 0)
++		SetPageUptodate(page);
++	else
++		ClearPageUptodate(page);
++
++	print_exit_status(err);
++	return err;
++}
++
++
++STATIC int
++mini_fo_readpage(file_t *file, page_t *page)
++{
++	int err;
++	print_entry_location();
++
++	err = mini_fo_do_readpage(file, page);
++
++	/*
++	 * we have to unlock our page, b/c we _might_ have gotten a locked page.
++	 * but we no longer have to wakeup on our page here, b/c UnlockPage does
++	 * it
++	 */
++	UnlockPage(page);
++
++	print_exit_status(err);
++	return err;
++}
++
++
++STATIC int
++mini_fo_prepare_write(file_t *file, page_t *page, unsigned from, unsigned to)
++{
++	int err = 0;
++
++	print_entry_location();
++
++	/*
++	 * we call kmap(page) only here, and do the kunmap
++	 * and the actual downcalls, including unlockpage and uncache
++	 * in commit_write.
++	 */
++	kmap(page);
++
++	/* fast path for whole page writes */
++	if (from == 0 && to == PAGE_CACHE_SIZE)
++		goto out;
++	/* read the page to "revalidate" our data */
++	/* call the helper function which doesn't unlock the page */
++	if (!Page_Uptodate(page))
++		err = mini_fo_do_readpage(file, page);
++
++ out:
++	print_exit_status(err);
++	return err;
++}
++
++
++
++STATIC int
++mini_fo_commit_write(file_t *file, page_t *page, unsigned from, unsigned to)
++{
++	int err = -ENOMEM;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	page_t *hidden_page;
++	file_t *hidden_file = NULL;
++	loff_t pos;
++	unsigned bytes = to - from;
++	unsigned hidden_from, hidden_to, hidden_bytes;
++
++	print_entry_location();
++
++	inode = page->mapping->host; /* CPW: Moved below print_entry_location */
++	hidden_inode = itohi(inode);
++
++	ASSERT(file != NULL);
++	/*
++	 * here we have a kmapped page, with data from the user copied
++	 * into it.  we need to encode_block it, and then call the lower
++	 * commit_write.  We also need to simulate same behavior of
++	 * generic_file_write, and call prepare_write on the lower f/s first.
++	 */
++#ifdef FIST_COUNT_WRITES
++	count_writes++;
++# endif /* FIST_COUNT_WRITES */
++
++	/* this is append and/or extend -- we can't have holes so fill them in */
++	if (page->index > (hidden_inode->i_size >> PAGE_CACHE_SHIFT)) {
++		page_t *tmp_page;
++		int index;
++		for (index = hidden_inode->i_size >> PAGE_CACHE_SHIFT; index < page->index; index++) {
++			tmp_page = mini_fo_get1page(file, index);
++			if (IS_ERR(tmp_page)) {
++				err = PTR_ERR(tmp_page);
++				goto out;
++			}
++			/* zero out the contents of the page at the appropriate offsets */
++			memset((char*)page_address(tmp_page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, PAGE_CACHE_SIZE - (inode->i_size & ~PAGE_CACHE_MASK));
++			if (!(err = mini_fo_prepare_write(file, tmp_page, 0, PAGE_CACHE_SIZE)))
++				err = mini_fo_commit_write(file, tmp_page, 0, PAGE_CACHE_SIZE);
++			page_cache_release(tmp_page);
++			if (err < 0)
++				goto out;
++			if (current->need_resched)
++				schedule();
++		}
++	}
++
++	if (ftopd(file) != NULL)
++		hidden_file = ftohf(file);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_inode->i_mutex);
++#else
++	down(&hidden_inode->i_sem);
++#endif
++	/* find lower page (returns a locked page) */
++	hidden_page = grab_cache_page(hidden_inode->i_mapping, page->index);
++	if (!hidden_page)
++		goto out;
++
++#if FIST_ENCODING_BLOCKSIZE > 1
++#  error encoding_blocksize greater than 1 is not yet supported
++# endif /* FIST_ENCODING_BLOCKSIZE > 1 */
++
++	hidden_from = from & (~(FIST_ENCODING_BLOCKSIZE - 1));
++	hidden_to = ((to + FIST_ENCODING_BLOCKSIZE - 1) & (~(FIST_ENCODING_BLOCKSIZE - 1)));
++	if ((page->index << PAGE_CACHE_SHIFT) + to > hidden_inode->i_size) {
++
++		/*
++		 * if this call to commit_write had introduced holes and the code
++		 * for handling holes was invoked, then the beginning of this page
++		 * must be zeroed out
++		 * zero out bytes from 'size_of_file%pagesize' to 'from'.
++		 */
++		if ((hidden_from - (inode->i_size & ~PAGE_CACHE_MASK)) > 0)
++			memset((char*)page_address(page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, hidden_from - (inode->i_size & ~PAGE_CACHE_MASK));
++
++	}
++	hidden_bytes = hidden_to - hidden_from;
++
++	/* call lower prepare_write */
++	err = -EINVAL;
++	if (hidden_inode->i_mapping &&
++	    hidden_inode->i_mapping->a_ops &&
++	    hidden_inode->i_mapping->a_ops->prepare_write)
++		err = hidden_inode->i_mapping->a_ops->prepare_write(hidden_file,
++								    hidden_page,
++								    hidden_from,
++								    hidden_to);
++	if (err)
++		/* don't leave locked pages behind, esp. on an ENOSPC */
++		goto out_unlock;
++
++	fist_dprint(8, "%s: encoding %d bytes\n", __FUNCTION__, hidden_bytes);
++	mini_fo_encode_block((char *) page_address(page) + hidden_from, (char*) page_address(hidden_page) + hidden_from, hidden_bytes, inode, inode->i_sb, page->index);
++	/* if encode_block could fail, then goto unlock and return error */
++
++	/* call lower commit_write */
++	err = hidden_inode->i_mapping->a_ops->commit_write(hidden_file,
++							   hidden_page,
++							   hidden_from,
++							   hidden_to);
++
++	if (err < 0)
++		goto out_unlock;
++
++	err = bytes;	/* convert error to no. of bytes */
++
++	inode->i_blocks = hidden_inode->i_blocks;
++	/* we may have to update i_size */
++	pos = (page->index << PAGE_CACHE_SHIFT) + to;
++	if (pos > inode->i_size)
++		inode->i_size = pos;
++
++	/*
++	 * update mtime and ctime of lower level file system
++	 * mini_fo' mtime and ctime are updated by generic_file_write
++	 */
++	hidden_inode->i_mtime = hidden_inode->i_ctime = CURRENT_TIME;
++
++	mark_inode_dirty_sync(inode);
++
++ out_unlock:
++	UnlockPage(hidden_page);
++	page_cache_release(hidden_page);
++	kunmap(page);		/* kmap was done in prepare_write */
++ out:
++	/* we must set our page as up-to-date */
++	if (err < 0)
++		ClearPageUptodate(page);
++	else
++		SetPageUptodate(page);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_inode->i_mutex);
++#else
++	up(&hidden_inode->i_sem);
++#endif
++	print_exit_status(err);
++	return err;			/* assume all is ok */
++}
++
++
++STATIC int
++mini_fo_bmap(struct address_space *mapping, long block)
++{
++	int err = 0;
++	inode_t *inode;
++	inode_t *hidden_inode;
++
++	print_entry_location();
++
++	inode = (inode_t *) mapping->host;
++	hidden_inode = itohi(inode);
++
++	if (hidden_inode->i_mapping->a_ops->bmap)
++		err = hidden_inode->i_mapping->a_ops->bmap(hidden_inode->i_mapping, block);
++	print_exit_location();
++	return err;
++}
++
++
++/*
++ * This function is copied verbatim from mm/filemap.c.
++ * XXX: It should be simply moved to some header file instead -- bug Al about it!
++ */
++static inline int sync_page(struct page *page)
++{
++	struct address_space *mapping = page->mapping;
++
++	if (mapping && mapping->a_ops && mapping->a_ops->sync_page)
++		return mapping->a_ops->sync_page(page);
++	return 0;
++}
++
++
++/*
++ * XXX: we may not need this function if not FIST_FILTER_DATA.
++ * FIXME: for FIST_FILTER_SCA, get all lower pages and sync them each.
++ */
++STATIC int
++mini_fo_sync_page(page_t *page)
++{
++	int err = 0;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	page_t *hidden_page;
++
++	print_entry_location();
++
++	inode = page->mapping->host; /* CPW: Moved below print_entry_location */
++	hidden_inode = itohi(inode);
++
++	/* find lower page (returns a locked page) */
++	hidden_page = grab_cache_page(hidden_inode->i_mapping, page->index);
++	if (!hidden_page)
++		goto out;
++
++	err = sync_page(hidden_page);
++
++	UnlockPage(hidden_page);	/* b/c grab_cache_page locked it */
++	page_cache_release(hidden_page); /* b/c grab_cache_page increased refcnt */
++
++ out:
++	print_exit_status(err);
++	return err;
++}
+--- /dev/null
++++ b/fs/mini_fo/README
+@@ -0,0 +1,163 @@
++README for the mini_fo overlay file system
++=========================================
++
++
++WHAT IS MINI_FO?
++----------------
++
++mini_fo is a virtual kernel file system that can make read-only
++file systems writable. This is done by redirecting modifying operations
++to a writeable location called "storage directory", and leaving the
++original data in the "base directory" untouched. When reading, the
++file system merges the modifed and original data so that only the
++newest versions will appear. This occurs transparently to the user,
++who can access the data like on any other read-write file system.
++
++Base and storage directories may be located on the same or on
++different partitions and may be of different file system types. While
++the storage directory obviously needs to be writable, the base may or
++may not be writable, what doesn't matter as it will no be modified
++anyway.
++
++
++WHAT IS GOOD FOR?
++-----------------
++
++The primary purpose of the mini_fo file system is to allow easy
++software updates to embedded systems, that often store their root
++file system in a read-only flash file system, but there are many
++more as for example sandboxing, or for allowing live-cds to
++permanently store information.
++
++
++BUILDING
++--------
++This should be simple. Adjust the Makefile to point to the correct
++kernel headers you want to build the module for. Then:
++
++    # make
++
++should build "mini_fo.o" for a 2.4 kernel or "mini_fo.ko" for a 2.6
++kernel.
++
++If you are building the module for you current kernel, you can install
++the module (as root):
++
++    # make install
++
++or uninstall with
++
++    # make uninstall
++
++
++USING THE FILE SYSTEM
++--------------------
++
++the general mount syntax is:
++
++   mount -t mini_fo -o base=<base directory>,sto=<storage directory>\
++                            <base directory> <mount point>
++
++Example:
++
++You have mounted a cdrom to /mnt/cdrom and want to modifiy some files
++on it:
++
++load the module (as root)
++
++    # insmod mini_fo.o for a 2.4 kernel or
++
++    # insmod mini_fo.ko for a 2.6 kernel
++
++
++create a storage dir in tmp and a mountpoint for mini_fo:
++
++    # mkdir /tmp/sto
++    # mkdir /mnt/mini_fo
++
++and mount the mini_fo file system:
++
++    # mount -t mini_fo -o base=/mnt/cdrom,sto=/tmp/sto /mnt/cdrom /mnt/mini_fo
++
++
++Now the data stored on the cd can be accessed via the mini_fo
++mountpoint just like any read-write file system, files can be modified
++and deleted, new ones can be created and so on. When done unmount the
++file system:
++
++    # unmount /mnt/mini_fo
++
++Note that if the file system is mounted again using the same storage
++file system, of course it will appear in the modified state again. If
++you remount it using an new empty storage directory, it will be
++unmodified. Therefore by executing:
++
++    # cd /tmp/sto
++    # rm -rf *
++
++you can nuke all the changes you made to the original file system. But
++ remember NEVER do this while the mini_fo file system is mounted!
++
++
++Alternatively you can use the mini_fo-overlay bash script, that
++simplifies managing mini_fo mounts. See TOOLS Section.
++
++
++TOOLS
++-----
++
++mini_fo-merge (experimental):
++
++This is a bash script that will merge changes contained in the storage
++directory back to the base directory. This allows mini_fo to function
++as a cache file system by overlaying a slow (network, ...) file system
++and using a fast (ramdisk, ...) as storage. When done, changes can be
++merged back to the (slow) base with mini_fo-merge. See "mini_fo-merge
++-h" for details.
++
++It can be usefull for merging changes back after a successfull test
++(patches, software updates...)
++
++
++mini_fo-overlay:
++
++This bash script simplifies managing one or more mini_fo mounts. For
++overlaying a directory called "basedir1", you can just call:
++
++    # mini_fo-overlay basedir1
++
++This will mount mini_fo with "basedir1" as base, "/tmp/sto-basedir1/"
++as storage to "/mnt/mini_fo-basedir1/". It has more options though,
++type "mini_fo-overlay -h" for details.
++
++
++DOCUMENTATION, REPORTING BUGS, GETTING HELP
++-------------------------------------------
++
++Please visit the mini_fo project page at:
++
++http://www.denx.de/twiki/bin/view/Know/MiniFOHome
++
++
++WARNINGS
++--------
++
++Never modify the base or the storage directorys while the mini_fo
++file system is mounted, or you might crash you system. Simply accessing
++and reading should not cause any trouble.
++
++Exporting a mini_fo mount point via NFS has not been tested, and may
++or may not work.
++
++Check the RELEASE_NOTES for details on bugs and features.
++
++
++
++Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++
++This program is free software; you can redistribute it and/or
++modify it under the terms of the GNU General Public License
++as published by the Free Software Foundation; either version
++2 of the License, or (at your option) any later version.
++
++
+--- /dev/null
++++ b/fs/mini_fo/RELEASE_NOTES
+@@ -0,0 +1,111 @@
++Release:	mini_fo-0.6.1 (v0-6-1)
++Date:		21.09.2005
++
++
++Changes:
++--------
++v0-6-1:
++
++- bugfixes (see ChangeLog)
++
++- two helper scripts "mini_fo_merge" and "mini_fo_overlay" (see
++  README for details).
++
++v0-6-0:
++
++- Support for 2.4 and 2.6 (see Makefile)
++
++- Partial hard link support (creating works as expected, but already
++  existing links in the base file system will be treated as if they
++  were individual files).
++
++- Various bugfixes and cleanups.
++
++
++v0-6-0-pre1:
++
++- This is mini_fo-0-6-0-pre1! This release is a complete rewrite of
++  many vital mini_fo parts such as the old whiteout list code which
++  has been replaced by the new META subsystem.
++
++- Light weight directory renaming implemented. This means if a
++  directory is renamed via the mini_fo filesystem this will no longer
++  result in a complete copy in storage, instead only one empty
++  directory will be created. All base filed contained in the original
++  directory stay there until modified.
++
++- Special files (creating, renaming, deleting etc.) now working.
++
++- Many bugfixes and cleanup, mini_fo is now a lot more stable.
++
++
++v0-5-10:
++
++- Final release of the 0-5-* versions. Next will be a complete rewrite
++  of many features. This release contains several bugfixes related to
++  directory renaming.
++
++
++v0-5-10-pre6:
++
++- Lots of cleanup and several bugfixes related to directory deleting
++
++- Directory renaming suddenly works, what is most likely due to the
++  fact tha that "mv" is smart: if the classic rename doesn't work it
++  will assume that source and target file are on different fs and will
++  copy the directory and try to remove the source directory. Until
++  directory removing wasn't implemented, it would fail to do this and
++  rollback.
++  So, directory renaming works for now, but it doesn't yet do what you
++  would expect from a overlay fs, so use with care.
++
++
++v0-5-10-pre5:
++
++- implemented directory deleting
++- made parsing of mount options more stable
++- New format of mount options! (See README)
++- I can't reproduce the unknown panic with 2.4.25 anymore, so I'll
++  happily assume it never existed!
++
++
++Implemented features:
++---------------------
++
++- creating hard links (see BUGS on already existing hard links)
++- lightweight directory renaming
++- renaming device files, pipes, sockets, etc.
++- creating, renaming, deleting of special files
++- deleting directorys
++- general directory reading (simple "ls" )
++- creating files in existing directorys
++- creating directorys
++- renaming files.
++- reading and writing files (involves opening)
++- appending to files (creates copy in storage)
++- deleting files
++- llseek works too, what allows editors to work
++- persistency (a deleted file stay deleted over remounts)
++- use of symbolic links
++- creating of device files
++
++
++Not (yet) implemented features:
++-------------------------------
++
++- full hard link support.
++
++
++
++BUGS:
++-----
++
++Hard links in the base file system will be treated as individual
++files, not as links to one inode.
++
++The main problem with hard links isn't allowing to create them, but
++their pure existence. If you modify a base hard link, the changes made
++will only show up on this link, the other link will remain in the
++original state. I hope to fix this someday. Please note that this does
++not effect the special hard links '.' and '..', that are handled
++seperately by the lower fs.
+--- /dev/null
++++ b/fs/mini_fo/state.c
+@@ -0,0 +1,620 @@
++/*
++ * Copyright (C) 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif /* HAVE_CONFIG_H */
++
++#include "fist.h"
++#include "mini_fo.h"
++
++
++/* create the storage file, setup new states */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++int create_sto_reg_file(dentry_t *dentry, int mode, struct nameidata *nd)
++#else
++int create_sto_reg_file(dentry_t *dentry, int mode)
++#endif
++{
++	int err = 0;
++	inode_t *dir;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++
++	if(exists_in_storage(dentry)) {
++		printk(KERN_CRIT "mini_fo: create_sto_file: wrong type or state.\n");
++		err = -EINVAL;
++		goto out;
++	}
++	err = get_neg_sto_dentry(dentry);
++
++	if (err) {
++		printk(KERN_CRIT "mini_fo: create_sto_file: ERROR getting neg. sto dentry.\n");
++		goto out;
++	}
++
++	dir = dentry->d_parent->d_inode;
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* lock parent */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++        down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = PTR_ERR(hidden_sto_dir_dentry);
++        if (IS_ERR(hidden_sto_dir_dentry))
++                goto out;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	err = vfs_create(hidden_sto_dir_dentry->d_inode,
++			 hidden_sto_dentry,
++			 mode, nd);
++#else
++	err = vfs_create(hidden_sto_dir_dentry->d_inode,
++			 hidden_sto_dentry,
++			 mode);
++#endif
++        if(err) {
++		printk(KERN_CRIT "mini_fo: create_sto_file: ERROR creating sto file.\n");
++                goto out_lock;
++	}
++
++	if(!dtohd2(dentry)->d_inode) {
++		printk(KERN_CRIT "mini_fo: create_sto_file: ERROR creating sto file [2].\n");
++                err = -EINVAL;
++                goto out_lock;
++        }
++
++        /* interpose the new inode */
++        if(dtost(dentry) == DELETED) {
++                dtost(dentry) = DEL_REWRITTEN;
++                err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0);
++                if(err)
++                        goto out_lock;
++        }
++        else if(dtost(dentry) == NON_EXISTANT) {
++                dtost(dentry) = CREATED;
++                err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0);
++                if(err)
++                        goto out_lock;
++        }
++        else if(dtost(dentry) == UNMODIFIED) {
++                dtost(dentry) = MODIFIED;
++                /* interpose on new inode */
++                if(itohi2(dentry->d_inode) != NULL) {
++                        printk(KERN_CRIT "mini_fo: create_sto_file: invalid inode detected.\n");
++                        err = -EINVAL;
++                        goto out_lock;
++                }
++                itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++	}
++	fist_copy_attr_timesizes(dentry->d_parent->d_inode,
++				 hidden_sto_dir_dentry->d_inode);
++
++ out_lock:
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++        dput(hidden_sto_dir_dentry);
++ out:
++	return err;
++}
++
++/* create the sto dir, setup states */
++int create_sto_dir(dentry_t *dentry, int mode)
++{
++	int err = 0;
++	inode_t *dir;
++	dentry_t *hidden_sto_dentry;
++        dentry_t *hidden_sto_dir_dentry;
++
++	/* had to take the "!S_ISDIR(mode))" check out, because it failed */
++	if(exists_in_storage(dentry)) {
++                printk(KERN_CRIT "mini_fo: create_sto_dir: wrong type or state.\\
++n");
++                err = -EINVAL;
++                goto out;
++        }
++
++	err = get_neg_sto_dentry(dentry);
++	if(err) {
++		err = -EINVAL;
++		goto out;
++	}
++
++	dir = dentry->d_parent->d_inode;
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = PTR_ERR(hidden_sto_dir_dentry);
++	if (IS_ERR(hidden_sto_dir_dentry))
++		goto out;
++
++	err = vfs_mkdir(hidden_sto_dir_dentry->d_inode,
++			hidden_sto_dentry,
++			mode);
++	if(err) {
++		printk(KERN_CRIT "mini_fo: create_sto_dir: ERROR creating sto dir.\n");
++		goto out_lock;
++	}
++
++	if(!dtohd2(dentry)->d_inode) {
++		printk(KERN_CRIT "mini_fo: create_sto_dir: ERROR creating sto dir [2].\n");
++		err = -EINVAL;
++		goto out_lock;
++	}
++
++	/* interpose the new inode */
++	if(dtost(dentry) == DELETED) {
++		dtost(dentry) = DEL_REWRITTEN;
++		err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0);
++		if(err)
++			goto out_lock;
++	}
++	else if(dtopd(dentry)->state == NON_EXISTANT) {
++		dtopd(dentry)->state = CREATED;
++		err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0);
++		if(err)
++			goto out_lock;
++	}
++	else if(dtopd(dentry)->state == UNMODIFIED) {
++		dtopd(dentry)->state = MODIFIED;
++		/* interpose on new inode */
++		if(itohi2(dentry->d_inode) != NULL) {
++			printk(KERN_CRIT "mini_fo:  create_sto_dir: ERROR, invalid inode detected.\n");
++			err = -EINVAL;
++			goto out_lock;
++		}
++		itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++	}
++
++	fist_copy_attr_timesizes(dir, hidden_sto_dir_dentry->d_inode);
++
++	/* initalize the wol list */
++	itopd(dentry->d_inode)->deleted_list_size = -1;
++	itopd(dentry->d_inode)->renamed_list_size = -1;
++	meta_build_lists(dentry);
++
++
++ out_lock:
++	/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++ out:
++	return err;
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++int create_sto_nod(dentry_t *dentry, int mode, dev_t dev)
++#else
++int create_sto_nod(dentry_t *dentry, int mode, int dev)
++#endif
++{
++	int err = 0;
++	inode_t *dir;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++
++	if(exists_in_storage(dentry)) {
++		err = -EEXIST;
++		goto out;
++	}
++	err = get_neg_sto_dentry(dentry);
++
++	if (err) {
++                printk(KERN_CRIT "mini_fo: create_sto_nod: ERROR getting neg. sto dentry.\n");
++                goto out;
++        }
++
++	dir = dentry->d_parent->d_inode;
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* lock parent */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = PTR_ERR(hidden_sto_dir_dentry);
++	if (IS_ERR(hidden_sto_dir_dentry))
++		goto out;
++
++	err = vfs_mknod(hidden_sto_dir_dentry->d_inode, hidden_sto_dentry, mode, dev);
++	if(err)
++		goto out_lock;
++
++	if(!dtohd2(dentry)->d_inode) {
++		printk(KERN_CRIT "mini_fo: create_sto_nod: creating storage inode failed [1].\n");
++		err = -EINVAL; /* return something indicating failure */
++		goto out_lock;
++	}
++
++	/* interpose the new inode */
++	if(dtost(dentry) == DELETED) {
++		dtost(dentry) = DEL_REWRITTEN;
++		err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0);
++		if(err)
++			goto out_lock;
++	}
++	else if(dtost(dentry) == NON_EXISTANT) {
++		dtost(dentry) = CREATED;
++		err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0);
++		if(err)
++			goto out_lock;
++	}
++	else if(dtost(dentry) == UNMODIFIED) {
++		dtost(dentry) = MODIFIED;
++		/* interpose on new inode */
++		if(itohi2(dentry->d_inode) != NULL) {
++			printk(KERN_CRIT "mini_fo: create_sto_nod: error, invalid inode detected.\n");
++			err = -EINVAL;
++			goto out_lock;
++		}
++		itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++	}
++
++	fist_copy_attr_timesizes(dir, hidden_sto_dir_dentry->d_inode);
++
++ out_lock:
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++ out:
++	return err;
++}
++
++
++/* unimplemented (and possibly not usefull):
++
++   nondir-del_to_del_rew
++   nondir-non_exist_to_creat
++
++   dir-unmod_to_del
++   dir-mod_to_del
++   dir-creat_to_del
++   dir-del_rew_to_del
++   dir-del_to_del_rew
++   dir-non_exist_to_creat
++*/
++
++
++/* bring a file of any type from state UNMODIFIED to MODIFIED */
++int nondir_unmod_to_mod(dentry_t *dentry, int cp_flag)
++{
++	int err = 0;
++	struct vfsmount *tgt_mnt;
++	struct vfsmount *src_mnt;
++	dentry_t *tgt_dentry;
++	dentry_t *src_dentry;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++
++	check_mini_fo_dentry(dentry);
++
++	if((dtost(dentry) != UNMODIFIED) ||
++	   S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++	err = get_neg_sto_dentry(dentry);
++
++	if (err) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                  ERROR getting neg. sto dentry.\n");
++		goto out;
++	}
++
++	/* create sto file */
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* lock parent */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++        down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = PTR_ERR(hidden_sto_dir_dentry);
++        if (IS_ERR(hidden_sto_dir_dentry))
++                goto out;
++
++	/* handle different types of nondirs */
++	if(S_ISCHR(dentry->d_inode->i_mode) ||
++	   S_ISBLK(dentry->d_inode->i_mode)) {
++		err = vfs_mknod(hidden_sto_dir_dentry->d_inode,
++				hidden_sto_dentry,
++				dtohd(dentry)->d_inode->i_mode,
++				dtohd(dentry)->d_inode->i_rdev);
++	}
++
++	else if(S_ISREG(dentry->d_inode->i_mode)) {
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		err = vfs_create(hidden_sto_dir_dentry->d_inode,
++				 hidden_sto_dentry,
++				 dtohd(dentry)->d_inode->i_mode, NULL);
++#else
++		err = vfs_create(hidden_sto_dir_dentry->d_inode,
++				 hidden_sto_dentry,
++				 dtohd(dentry)->d_inode->i_mode);
++#endif
++	}
++        if(err) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                  ERROR creating sto file.\n");
++                goto out_lock;
++	}
++
++	/* interpose on new inode */
++	if(itohi2(dentry->d_inode) != NULL) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                  ERROR, invalid inode detected.\n");
++		err = -EINVAL;
++		goto out_lock;
++	}
++
++	itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++
++        fist_copy_attr_timesizes(dentry->d_parent->d_inode,
++				 hidden_sto_dir_dentry->d_inode);
++	dtost(dentry) = MODIFIED;
++
++	/* copy contents if regular file and cp_flag = 1 */
++	if((cp_flag == 1) && S_ISREG(dentry->d_inode->i_mode)) {
++
++		/* unlock first */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++		dput(hidden_sto_dir_dentry);
++
++		tgt_dentry = dtohd2(dentry);
++		tgt_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++		src_dentry = dtohd(dentry);
++		src_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt;
++
++		err = mini_fo_cp_cont(tgt_dentry, tgt_mnt,
++				      src_dentry, src_mnt);
++		if(err) {
++			printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                          ERROR copying contents.\n");
++		}
++		goto out;
++	}
++
++ out_lock:
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++        dput(hidden_sto_dir_dentry);
++ out:
++	return err;
++}
++
++/* this function is currently identical to nondir_creat_to_del */
++int nondir_del_rew_to_del(dentry_t *dentry)
++{
++	return nondir_creat_to_del(dentry);
++}
++
++int nondir_creat_to_del(dentry_t *dentry)
++{
++	int err = 0;
++
++	inode_t *hidden_sto_dir_inode;
++	dentry_t *hidden_sto_dir_dentry;
++	dentry_t *hidden_sto_dentry;
++
++	check_mini_fo_dentry(dentry);
++
++	/* for now this function serves for both state DEL_REWRITTEN and
++	 * CREATED */
++	if(!(dtost(dentry) == CREATED || (dtost(dentry) == DEL_REWRITTEN)) ||
++	   S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: nondir_mod_to_del/del_rew_to_del: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++
++	hidden_sto_dir_inode = itohi2(dentry->d_parent->d_inode);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry);*/
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	/* avoid destroying the hidden inode if the file is in use */
++	dget(hidden_sto_dentry);
++	err = vfs_unlink(hidden_sto_dir_inode, hidden_sto_dentry);
++	dput(hidden_sto_dentry);
++	if(!err)
++		d_delete(hidden_sto_dentry);
++
++	/* propagate number of hard-links */
++	dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++
++	dtost(dentry) = NON_EXISTANT;
++
++	/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++
++ out:
++	return err;
++}
++
++int nondir_mod_to_del(dentry_t *dentry)
++{
++	int err;
++	dentry_t *hidden_sto_dentry;
++	inode_t *hidden_sto_dir_inode;
++	dentry_t *hidden_sto_dir_dentry;
++
++	check_mini_fo_dentry(dentry);
++
++	if(dtost(dentry) != MODIFIED ||
++	   S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: nondir_mod_to_del: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++
++	hidden_sto_dir_inode = itohi2(dentry->d_parent->d_inode);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* was hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	/* avoid destroying the hidden inode if the file is in use */
++	dget(hidden_sto_dentry);
++	err = vfs_unlink(hidden_sto_dir_inode, hidden_sto_dentry);
++	dput(hidden_sto_dentry);
++	if(!err)
++		d_delete(hidden_sto_dentry);
++
++	/* propagate number of hard-links */
++	dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++
++	/* dput base dentry, this will relase the inode and free the
++	 * dentry, as we will never need it again. */
++	dput(dtohd(dentry));
++	dtohd(dentry) = NULL;
++	dtost(dentry) = DELETED;
++
++	/* add deleted file to META-file */
++	meta_add_d_entry(dentry->d_parent,
++			 dentry->d_name.name,
++			 dentry->d_name.len);
++
++	/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++
++ out:
++	return err;
++}
++
++int nondir_unmod_to_del(dentry_t *dentry)
++{
++	int err = 0;
++
++	check_mini_fo_dentry(dentry);
++
++	if(dtost(dentry) != UNMODIFIED ||
++	   S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_del: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++
++	 /* next we have to get a negative dentry for the storage file */
++	err = get_neg_sto_dentry(dentry);
++
++	if(err)
++		goto out;
++
++	/* add deleted file to META lists */
++	err = meta_add_d_entry(dentry->d_parent,
++			       dentry->d_name.name,
++			       dentry->d_name.len);
++
++	if(err)
++		goto out;
++
++	/* dput base dentry, this will relase the inode and free the
++	 * dentry, as we will never need it again. */
++	dput(dtohd(dentry));
++	dtohd(dentry) = NULL;
++	dtost(dentry) = DELETED;
++
++ out:
++	return err;
++}
++
++/* bring a dir from state UNMODIFIED to MODIFIED */
++int dir_unmod_to_mod(dentry_t *dentry)
++{
++	int err;
++
++	check_mini_fo_dentry(dentry);
++
++	if(dtost(dentry) != UNMODIFIED ||
++	   !S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: dir_unmod_to_mod: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++
++	/* this creates our dir incl. sto. structure */
++	err = build_sto_structure(dentry->d_parent, dentry);
++	if(err) {
++		printk(KERN_CRIT "mini_fo: dir_unmod_to_mod: \
++                                  build_sto_structure failed.\n");
++		goto out;
++	}
++ out:
++	return err;
++}
++
+--- /dev/null
++++ b/fs/mini_fo/super.c
+@@ -0,0 +1,281 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++
++
++STATIC void
++mini_fo_read_inode(inode_t *inode)
++{
++	static struct address_space_operations mini_fo_empty_aops;
++
++	__itopd(inode) = kmalloc(sizeof(struct mini_fo_inode_info), GFP_KERNEL);
++	if (!itopd(inode)) {
++		printk("<0>%s:%s:%d: No kernel memory!\n", __FILE__, __FUNCTION__, __LINE__);
++		ASSERT(NULL);
++	}
++	itohi(inode) = NULL;
++	itohi2(inode) = NULL;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	inode->i_version++;
++#else
++	inode->i_version = ++event;	/* increment inode version */
++#endif
++	inode->i_op = &mini_fo_main_iops;
++	inode->i_fop = &mini_fo_main_fops;
++#if 0
++	/*
++	 * XXX: To export a file system via NFS, it has to have the
++	 * FS_REQUIRES_DEV flag, so turn it on.  But should we inherit it from
++	 * the lower file system, or can we allow our file system to be exported
++	 * even if the lower one cannot be natively exported.
++	 */
++	inode->i_sb->s_type->fs_flags |= FS_REQUIRES_DEV;
++	/*
++	 * OK, the above was a hack, which is now turned off because it may
++	 * cause a panic/oops on some systems.  The correct way to export a
++	 * "nodev" filesystem is via using nfs-utils > 1.0 and the "fsid=" export
++	 * parameter, which requires 2.4.20 or later.
++	 */
++#endif
++	/* I don't think ->a_ops is ever allowed to be NULL */
++	inode->i_mapping->a_ops = &mini_fo_empty_aops;
++}
++
++
++#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
++/*
++ * No need to call write_inode() on the lower inode, as it
++ * will have been marked 'dirty' anyway. But we might need
++ * to write some of our own stuff to disk.
++ */
++STATIC void
++mini_fo_write_inode(inode_t *inode, int sync)
++{
++	print_entry_location();
++	print_exit_location();
++}
++#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++
++
++STATIC void
++mini_fo_put_inode(inode_t *inode)
++{
++	/*
++	 * This is really funky stuff:
++	 * Basically, if i_count == 1, iput will then decrement it and this inode will be destroyed.
++	 * It is currently holding a reference to the hidden inode.
++	 * Therefore, it needs to release that reference by calling iput on the hidden inode.
++	 * iput() _will_ do it for us (by calling our clear_inode), but _only_ if i_nlink == 0.
++	 * The problem is, NFS keeps i_nlink == 1 for silly_rename'd files.
++	 * So we must for our i_nlink to 0 here to trick iput() into calling our clear_inode.
++	 */
++	if (atomic_read(&inode->i_count) == 1)
++		inode->i_nlink = 0;
++}
++
++
++#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
++/*
++ * we now define delete_inode, because there are two VFS paths that may
++ * destroy an inode: one of them calls clear inode before doing everything
++ * else that's needed, and the other is fine.  This way we truncate the inode
++ * size (and its pages) and then clear our own inode, which will do an iput
++ * on our and the lower inode.
++ */
++STATIC void
++mini_fo_delete_inode(inode_t *inode)
++{
++	print_entry_location();
++
++	fist_checkinode(inode, "mini_fo_delete_inode IN");
++	inode->i_size = 0;		/* every f/s seems to do that */
++	clear_inode(inode);
++
++	print_exit_location();
++}
++#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++
++
++/* final actions when unmounting a file system */
++STATIC void
++mini_fo_put_super(super_block_t *sb)
++{
++	if (stopd(sb)) {
++		mntput(stopd(sb)->hidden_mnt);
++		mntput(stopd(sb)->hidden_mnt2);
++
++		/* mk: no! dput(stopd(sb)->base_dir_dentry);
++		   dput(stopd(sb)->storage_dir_dentry); */
++
++		kfree(stopd(sb));
++		__stopd(sb) = NULL;
++	}
++}
++
++
++#ifdef NOT_NEEDED
++/*
++ * This is called in do_umount before put_super.
++ * The superblock lock is not held yet.
++ * We probably do not need to define this or call write_super
++ * on the hidden_sb, because sync_supers() will get to hidden_sb
++ * sooner or later.  But it is also called from file_fsync()...
++ */
++STATIC void
++mini_fo_write_super(super_block_t *sb)
++{
++	return;
++}
++#endif /* NOT_NEEDED */
++
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++mini_fo_statfs(struct dentry *d, struct kstatfs *buf)
++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_statfs(super_block_t *sb, struct kstatfs *buf)
++#else
++mini_fo_statfs(super_block_t *sb, struct statfs *buf)
++#endif
++{
++	int err = 0;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++	struct dentry *hidden_d;
++
++	hidden_d = dtohd(d);
++	err = vfs_statfs(hidden_d, buf);
++#else
++	super_block_t *hidden_sb;
++
++	hidden_sb = stohs(sb);
++	err = vfs_statfs(hidden_sb, buf);
++#endif
++
++	return err;
++}
++
++
++/*
++ * XXX: not implemented.  This is not allowed yet.
++ * Should we call this on the hidden_sb?  Probably not.
++ */
++STATIC int
++mini_fo_remount_fs(super_block_t *sb, int *flags, char *data)
++{
++	//printk(KERN_CRIT "mini_fo_remount_fs: WARNING, this function is umimplemented.\n");
++	return -ENOSYS;
++}
++
++
++/*
++ * Called by iput() when the inode reference count reached zero
++ * and the inode is not hashed anywhere.  Used to clear anything
++ * that needs to be, before the inode is completely destroyed and put
++ * on the inode free list.
++ */
++STATIC void
++mini_fo_clear_inode(inode_t *inode)
++{
++	/*
++	 * Decrement a reference to a hidden_inode, which was incremented
++	 * by our read_inode when it was created initially.
++	 */
++
++	/* release the wol_list */
++	if(S_ISDIR(inode->i_mode)) {
++		__meta_put_lists(inode);
++	}
++
++	/* mk: fan out fun */
++	if(itohi(inode))
++		iput(itohi(inode));
++	if(itohi2(inode))
++		iput(itohi2(inode));
++
++	// XXX: why this assertion fails?
++	// because it doesn't like us
++	// ASSERT((inode->i_state & I_DIRTY) == 0);
++	kfree(itopd(inode));
++	__itopd(inode) = NULL;
++}
++
++
++/*
++ * Called in do_umount() if the MNT_FORCE flag was used and this
++ * function is defined.  See comment in linux/fs/super.c:do_umount().
++ * Used only in nfs, to kill any pending RPC tasks, so that subsequent
++ * code can actually succeed and won't leave tasks that need handling.
++ *
++ * PS. I wonder if this is somehow useful to undo damage that was
++ * left in the kernel after a user level file server (such as amd)
++ * dies.
++ */
++STATIC void
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++mini_fo_umount_begin(struct vfsmount *mnt, int flags)
++{
++	struct vfsmount *hidden_mnt;
++
++	hidden_mnt = stopd(mnt->mnt_sb)->hidden_mnt;
++
++	if (hidden_mnt->mnt_sb->s_op->umount_begin)
++		hidden_mnt->mnt_sb->s_op->umount_begin(hidden_mnt, flags);
++
++}
++#else
++mini_fo_umount_begin(super_block_t *sb)
++{
++	super_block_t *hidden_sb;
++
++	hidden_sb = stohs(sb);
++
++	if (hidden_sb->s_op->umount_begin)
++		hidden_sb->s_op->umount_begin(hidden_sb);
++
++}
++#endif
++
++
++struct super_operations mini_fo_sops =
++{
++	read_inode:		mini_fo_read_inode,
++#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
++	write_inode:	mini_fo_write_inode,
++#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++	put_inode:		mini_fo_put_inode,
++#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
++	delete_inode:	mini_fo_delete_inode,
++#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++	put_super:		mini_fo_put_super,
++	statfs:		mini_fo_statfs,
++	remount_fs:		mini_fo_remount_fs,
++	clear_inode:	mini_fo_clear_inode,
++	umount_begin:	mini_fo_umount_begin,
++};
+--- /dev/null
++++ b/fs/mini_fo/Kconfig
+@@ -0,0 +1,3 @@
++config MINI_FO
++	tristate "Mini fanout overlay filesystem"
++
diff --git a/target/linux/generic/patches-2.6.30/210-mini_fo_2.6.25_fixes.patch b/target/linux/generic/patches-2.6.30/210-mini_fo_2.6.25_fixes.patch
new file mode 100644
index 0000000000..d71e3b6faa
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/210-mini_fo_2.6.25_fixes.patch
@@ -0,0 +1,143 @@
+--- a/fs/mini_fo/main.c
++++ b/fs/mini_fo/main.c
+@@ -79,6 +79,7 @@ mini_fo_tri_interpose(dentry_t *hidden_d
+ 	 * of the new inode's fields
+ 	 */
+ 
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,25)
+ 	/*
+ 	 * original: inode = iget(sb, hidden_inode->i_ino);
+ 	 */
+@@ -87,6 +88,13 @@ mini_fo_tri_interpose(dentry_t *hidden_d
+ 		err = -EACCES;		/* should be impossible??? */
+ 		goto out;
+ 	}
++#else
++	inode = mini_fo_iget(sb, iunique(sb, 25));
++	if (IS_ERR(inode)) {
++		err = PTR_ERR(inode);
++		goto out;
++	}
++#endif
+ 
+ 	/*
+ 	 * interpose the inode if not already interposed
+@@ -184,9 +192,9 @@ mini_fo_parse_options(super_block_t *sb,
+ 				hidden_root = ERR_PTR(err);
+ 				goto out;
+ 			}
+-			hidden_root = nd.dentry;
+-			stopd(sb)->base_dir_dentry = nd.dentry;
+-			stopd(sb)->hidden_mnt = nd.mnt;
++			hidden_root = nd_get_dentry(&nd);
++			stopd(sb)->base_dir_dentry = nd_get_dentry(&nd);
++			stopd(sb)->hidden_mnt = nd_get_mnt(&nd);
+ 
+ 		} else if(!strncmp("sto=", options, 4)) {
+ 			/* parse the storage dir */
+@@ -204,9 +212,9 @@ mini_fo_parse_options(super_block_t *sb,
+ 				hidden_root2 = ERR_PTR(err);
+ 				goto out;
+ 			}
+-			hidden_root2 = nd2.dentry;
+-			stopd(sb)->storage_dir_dentry = nd2.dentry;
+-			stopd(sb)->hidden_mnt2 = nd2.mnt;
++			hidden_root2 = nd_get_dentry(&nd2);
++			stopd(sb)->storage_dir_dentry = nd_get_dentry(&nd2);
++			stopd(sb)->hidden_mnt2 = nd_get_mnt(&nd2);
+ 			stohs2(sb) = hidden_root2->d_sb;
+ 
+ 			/* validate storage dir, this is done in
+--- a/fs/mini_fo/mini_fo.h
++++ b/fs/mini_fo/mini_fo.h
+@@ -302,6 +302,10 @@ extern int mini_fo_tri_interpose(dentry_
+ extern int mini_fo_cp_cont(dentry_t *tgt_dentry, struct vfsmount *tgt_mnt,
+ 			   dentry_t *src_dentry, struct vfsmount *src_mnt);
+ 
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25)
++extern struct inode *mini_fo_iget(struct super_block *sb, unsigned long ino);
++#endif
++
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+ extern int mini_fo_create(inode_t *dir, dentry_t *dentry, int mode, struct nameidata *nd);
+ 
+@@ -501,6 +505,29 @@ static inline void double_unlock(struct 
+ #endif  /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) */
+ #endif /* __KERNEL__ */
+ 
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25)
++static inline dentry_t *nd_get_dentry(struct nameidata *nd)
++{
++	return (nd->path.dentry);
++}
++
++static inline struct vfsmount *nd_get_mnt(struct nameidata *nd)
++{
++	return (nd->path.mnt);
++}
++#else
++static inline dentry_t *nd_get_dentry(struct nameidata *nd)
++{
++	return (nd->dentry);
++}
++
++static inline struct vfsmount *nd_get_mnt(struct nameidata *nd)
++{
++	return (nd->mnt);
++}
++#endif
++
+ /*
+  * Definitions for user and kernel code
+  */
+--- a/fs/mini_fo/super.c
++++ b/fs/mini_fo/super.c
+@@ -262,10 +262,31 @@ mini_fo_umount_begin(super_block_t *sb)
+ }
+ #endif
+ 
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25)
++struct inode *
++mini_fo_iget(struct super_block *sb, unsigned long ino)
++{
++	struct inode *inode;
++
++	inode = iget_locked(sb, ino);
++	if (!inode)
++		return ERR_PTR(-ENOMEM);
++
++	if (!(inode->i_state & I_NEW))
++		return inode;
++
++	mini_fo_read_inode(inode);
++
++	unlock_new_inode(inode);
++	return inode;
++}
++#endif /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25) */
+ 
+ struct super_operations mini_fo_sops =
+ {
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,25)
+ 	read_inode:		mini_fo_read_inode,
++#endif
+ #if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
+ 	write_inode:	mini_fo_write_inode,
+ #endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
+--- a/fs/mini_fo/aux.c
++++ b/fs/mini_fo/aux.c
+@@ -164,11 +164,11 @@ dentry_t *bpath_walk(super_block_t *sb, 
+ 	err = vfs_path_lookup(mnt->mnt_root, mnt, bpath+1, 0, &nd);
+ 
+ 	/* validate */
+-	if (err || !nd.dentry || !nd.dentry->d_inode) {
++	if (err || !nd_get_dentry(&nd) || !nd_get_dentry(&nd)->d_inode) {
+ 		printk(KERN_CRIT "mini_fo: bpath_walk: path_walk failed.\n");
+ 		return NULL;
+ 	}
+-	return nd.dentry;
++	return nd_get_dentry(&nd);
+ }
+ 
+ 
diff --git a/target/linux/generic/patches-2.6.30/211-mini_fo_2.6.25_dentry_open_war.patch b/target/linux/generic/patches-2.6.30/211-mini_fo_2.6.25_dentry_open_war.patch
new file mode 100644
index 0000000000..48a19429b9
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/211-mini_fo_2.6.25_dentry_open_war.patch
@@ -0,0 +1,66 @@
+--- a/fs/mini_fo/meta.c
++++ b/fs/mini_fo/meta.c
+@@ -442,6 +442,11 @@ int meta_write_d_entry(dentry_t *dentry,
+ 			   S_IRUSR | S_IWUSR);
+ #endif
+ 	}
++
++	/* $%& err, is this correct? */
++	meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++	mntget(meta_mnt);
++
+         /* open META-file for writing */
+         meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
+         if(!meta_file || IS_ERR(meta_file)) {
+@@ -535,6 +540,11 @@ int meta_write_r_entry(dentry_t *dentry,
+ 			   meta_dentry, S_IRUSR | S_IWUSR);
+ #endif
+ 	}
++
++	/* $%& err, is this correct? */
++	meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++	mntget(meta_mnt);
++
+         /* open META-file for writing */
+         meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
+         if(!meta_file || IS_ERR(meta_file)) {
+@@ -671,14 +681,16 @@ int meta_sync_d_list(dentry_t *dentry, i
+ 		}
+ 	}
+ 
++	/* $%& err, is this correct? */
++	meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++	mntget(meta_mnt);
++
+         /* open META-file for writing */
+         meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
+                                   ERROR opening meta file.\n");
+-		/* we don't mntget so we dont't mntput (for now)
+-		 * mntput(meta_mnt);
+-		 */
++		mntput(meta_mnt);
+ 		dput(meta_dentry);
+ 		err = -1;
+                 goto out;
+@@ -811,14 +823,16 @@ int meta_sync_r_list(dentry_t *dentry, i
+ 		}
+ 	}
+ 
++	/* $%& err, is this correct? */
++	meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++	mntget(meta_mnt);
++
+         /* open META-file for writing */
+         meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
+                                   ERROR opening meta file.\n");
+-		/* we don't mntget so we dont't mntput (for now)
+-		 * mntput(meta_mnt);
+-		 */
++		mntput(meta_mnt);
+ 		dput(meta_dentry);
+ 		err = -1;
+                 goto out;
diff --git a/target/linux/generic/patches-2.6.30/212-mini_fo_2.6.26_fixes.patch b/target/linux/generic/patches-2.6.30/212-mini_fo_2.6.26_fixes.patch
new file mode 100644
index 0000000000..8bd9ba3244
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/212-mini_fo_2.6.26_fixes.patch
@@ -0,0 +1,37 @@
+--- a/fs/mini_fo/super.c
++++ b/fs/mini_fo/super.c
+@@ -84,6 +84,7 @@ mini_fo_write_inode(inode_t *inode, int 
+ #endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
+ 
+ 
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)
+ STATIC void
+ mini_fo_put_inode(inode_t *inode)
+ {
+@@ -99,6 +100,7 @@ mini_fo_put_inode(inode_t *inode)
+ 	if (atomic_read(&inode->i_count) == 1)
+ 		inode->i_nlink = 0;
+ }
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26) */
+ 
+ 
+ #if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
+@@ -238,7 +240,7 @@ mini_fo_clear_inode(inode_t *inode)
+  * dies.
+  */
+ STATIC void
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26))
+ mini_fo_umount_begin(struct vfsmount *mnt, int flags)
+ {
+ 	struct vfsmount *hidden_mnt;
+@@ -290,7 +292,9 @@ struct super_operations mini_fo_sops =
+ #if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
+ 	write_inode:	mini_fo_write_inode,
+ #endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)
+ 	put_inode:		mini_fo_put_inode,
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26) */
+ #if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
+ 	delete_inode:	mini_fo_delete_inode,
+ #endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
diff --git a/target/linux/generic/patches-2.6.30/213-mini_fo_2.6.27_fixes.patch b/target/linux/generic/patches-2.6.30/213-mini_fo_2.6.27_fixes.patch
new file mode 100644
index 0000000000..f92c18b254
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/213-mini_fo_2.6.27_fixes.patch
@@ -0,0 +1,41 @@
+--- a/fs/mini_fo/inode.c
++++ b/fs/mini_fo/inode.c
+@@ -439,7 +439,7 @@ mini_fo_symlink(inode_t *dir, dentry_t *
+ 	int err=0;
+ 	dentry_t *hidden_sto_dentry;
+ 	dentry_t *hidden_sto_dir_dentry;
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27))
+         umode_t mode;
+ #endif
+ 
+@@ -466,7 +466,7 @@ mini_fo_symlink(inode_t *dir, dentry_t *
+ 	down(&hidden_sto_dir_dentry->d_inode->i_sem);
+ #endif
+ 
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27))
+ 	mode = S_IALLUGO;
+ 	err = vfs_symlink(hidden_sto_dir_dentry->d_inode,
+ 			  hidden_sto_dentry, symname, mode);
+@@ -1128,7 +1128,7 @@ void mini_fo_put_link(struct dentry *den
+ #endif
+ 
+ STATIC int
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27))
+ mini_fo_permission(inode_t *inode, int mask, struct nameidata *nd)
+ #else
+ mini_fo_permission(inode_t *inode, int mask)
+@@ -1150,8 +1150,9 @@ mini_fo_permission(inode_t *inode, int m
+ 	 *	if (err)
+ 	 *		goto out;
+ 	 */
+-
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
++	err = inode_permission(hidden_inode, mask);
++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+ 	err = permission(hidden_inode, mask, nd);
+ #else
+ 	err = permission(hidden_inode, mask);
diff --git a/target/linux/generic/patches-2.6.30/214-mini_fo_2.6.29.patch b/target/linux/generic/patches-2.6.30/214-mini_fo_2.6.29.patch
new file mode 100644
index 0000000000..63d704bf51
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/214-mini_fo_2.6.29.patch
@@ -0,0 +1,96 @@
+--- a/fs/mini_fo/aux.c
++++ b/fs/mini_fo/aux.c
+@@ -236,7 +236,7 @@ int mini_fo_cp_cont(dentry_t *tgt_dentry
+ 	mntget(src_mnt);
+ 
+ 	/* open file write only */
+-	tgt_file = dentry_open(tgt_dentry, tgt_mnt, 0x1);
++	tgt_file = dentry_open(tgt_dentry, tgt_mnt, 0x1, current_cred());
+ 	if(!tgt_file || IS_ERR(tgt_file)) {
+ 		printk(KERN_CRIT "mini_fo_cp_cont: ERROR opening target file.\n");
+ 		err = PTR_ERR(tgt_file);
+@@ -244,7 +244,7 @@ int mini_fo_cp_cont(dentry_t *tgt_dentry
+ 	}
+ 
+ 	/* open file read only */
+-	src_file = dentry_open(src_dentry, src_mnt, 0x0);
++	src_file = dentry_open(src_dentry, src_mnt, 0x0, current_cred());
+ 	if(!src_file || IS_ERR(src_file)) {
+ 		printk(KERN_CRIT "mini_fo_cp_cont: ERROR opening source file.\n");
+ 		err = PTR_ERR(src_file);
+--- a/fs/mini_fo/file.c
++++ b/fs/mini_fo/file.c
+@@ -437,7 +437,7 @@ mini_fo_open(inode_t *inode, file_t *fil
+ 			mntget(stopd(inode->i_sb)->hidden_mnt);
+ 			hidden_file = dentry_open(hidden_dentry,
+ 						  stopd(inode->i_sb)->hidden_mnt,
+-						  hidden_flags);
++						  hidden_flags, file->f_cred);
+ 			if (IS_ERR(hidden_file)) {
+ 				err = PTR_ERR(hidden_file);
+ 				dput(hidden_dentry);
+@@ -479,7 +479,7 @@ mini_fo_open(inode_t *inode, file_t *fil
+ 			mntget(stopd(inode->i_sb)->hidden_mnt);
+ 			hidden_file = dentry_open(hidden_dentry,
+ 						  stopd(inode->i_sb)->hidden_mnt,
+-						  hidden_flags);
++						  hidden_flags, file->f_cred);
+ 			if (IS_ERR(hidden_file)) {
+ 				err = PTR_ERR(hidden_file);
+ 				dput(hidden_dentry);
+@@ -512,7 +512,7 @@ mini_fo_open(inode_t *inode, file_t *fil
+ 	mntget(stopd(inode->i_sb)->hidden_mnt2);
+ 	hidden_sto_file = dentry_open(hidden_sto_dentry,
+ 				      stopd(inode->i_sb)->hidden_mnt2,
+-				      hidden_flags);
++				      hidden_flags, file->f_cred);
+ 
+ 	/* dentry_open dputs the dentry if it fails */
+ 	if (IS_ERR(hidden_sto_file)) {
+--- a/fs/mini_fo/meta.c
++++ b/fs/mini_fo/meta.c
+@@ -56,7 +56,7 @@ int meta_build_lists(dentry_t *dentry)
+ 
+ 
+ 		/* open META-file for reading */
+-		meta_file = dentry_open(meta_dentry, meta_mnt, 0x0);
++		meta_file = dentry_open(meta_dentry, meta_mnt, 0x0, current_cred());
+ 		if(!meta_file || IS_ERR(meta_file)) {
+ 			printk(KERN_CRIT "mini_fo: meta_build_lists: \
+                                           ERROR opening META file.\n");
+@@ -448,7 +448,7 @@ int meta_write_d_entry(dentry_t *dentry,
+ 	mntget(meta_mnt);
+ 
+         /* open META-file for writing */
+-        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1, current_cred());
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
+                                   ERROR opening meta file.\n");
+@@ -546,7 +546,7 @@ int meta_write_r_entry(dentry_t *dentry,
+ 	mntget(meta_mnt);
+ 
+         /* open META-file for writing */
+-        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1, current_cred());
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_write_r_entry: \
+                                   ERROR opening meta file.\n");
+@@ -686,7 +686,7 @@ int meta_sync_d_list(dentry_t *dentry, i
+ 	mntget(meta_mnt);
+ 
+         /* open META-file for writing */
+-        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1, current_cred());
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
+                                   ERROR opening meta file.\n");
+@@ -828,7 +828,7 @@ int meta_sync_r_list(dentry_t *dentry, i
+ 	mntget(meta_mnt);
+ 
+         /* open META-file for writing */
+-        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1, current_cred());
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
+                                   ERROR opening meta file.\n");
diff --git a/target/linux/generic/patches-2.6.30/215-mini_fo_2.6.30.patch b/target/linux/generic/patches-2.6.30/215-mini_fo_2.6.30.patch
new file mode 100644
index 0000000000..2d20920614
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/215-mini_fo_2.6.30.patch
@@ -0,0 +1,157 @@
+--- a/fs/mini_fo/aux.c
++++ b/fs/mini_fo/aux.c
+@@ -86,8 +86,10 @@ int get_neg_sto_dentry(dentry_t *dentry)
+ 	len = dentry->d_name.len;
+ 	name = dentry->d_name.name;
+ 
++	mutex_lock(&dtohd2(dentry->d_parent)->d_inode->i_mutex);
+ 	dtohd2(dentry) =
+ 		lookup_one_len(name, dtohd2(dentry->d_parent), len);
++	mutex_unlock(&dtohd2(dentry->d_parent)->d_inode->i_mutex);
+ 
+  out:
+ 	return err;
+@@ -426,7 +428,9 @@ int build_sto_structure(dentry_t *dir, d
+ 		const unsigned char *name;
+ 		len = dtohd(dentry)->d_name.len;
+ 		name = dtohd(dentry)->d_name.name;
++		mutex_lock(&dtohd2(dir)->d_inode->i_mutex);
+ 		hidden_sto_dentry = lookup_one_len(name, dtohd2(dir), len);
++		mutex_unlock(&dtohd2(dir)->d_inode->i_mutex);
+ 		dtohd2(dentry) = hidden_sto_dentry;
+ 	}
+ 
+--- a/fs/mini_fo/inode.c
++++ b/fs/mini_fo/inode.c
+@@ -113,17 +113,23 @@ mini_fo_lookup(inode_t *dir, dentry_t *d
+ 		hidden_dir_dentry = hidden_dentry->d_parent;
+ 		kfree(bpath);
+ 	}
+-	else if(hidden_dir_dentry && hidden_dir_dentry->d_inode)
++	else if(hidden_dir_dentry && hidden_dir_dentry->d_inode) {
++		mutex_lock(&hidden_dir_dentry->d_inode->i_mutex);
+ 		hidden_dentry =
+ 			lookup_one_len(name, hidden_dir_dentry, namelen);
+-	else
++		mutex_unlock(&hidden_dir_dentry->d_inode->i_mutex);
++	} else {
+ 		hidden_dentry = NULL;
++	}
+ 
+-	if(hidden_sto_dir_dentry && hidden_sto_dir_dentry->d_inode)
++	if(hidden_sto_dir_dentry && hidden_sto_dir_dentry->d_inode) {
++		mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
+ 		hidden_sto_dentry =
+ 			lookup_one_len(name, hidden_sto_dir_dentry, namelen);
+-	else
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++	} else {
+ 		hidden_sto_dentry =  NULL;
++	}
+ 
+ 	/* catch error in lookup */
+ 	if (IS_ERR(hidden_dentry) || IS_ERR(hidden_sto_dentry)) {
+@@ -553,9 +559,11 @@ mini_fo_rmdir(inode_t *dir, dentry_t *de
+ #endif
+ 
+ 		/* Delete an old WOL file contained in the storage dir */
++		mutex_lock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		meta_dentry = lookup_one_len(META_FILENAME,
+ 					     hidden_sto_dentry,
+ 					     strlen(META_FILENAME));
++		mutex_unlock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		if(meta_dentry->d_inode) {
+ 			err = vfs_unlink(hidden_sto_dentry->d_inode, meta_dentry);
+ 			dput(meta_dentry);
+@@ -643,9 +651,11 @@ mini_fo_rmdir(inode_t *dir, dentry_t *de
+ #endif
+ 
+ 		/* Delete an old WOL file contained in the storage dir */
++		mutex_lock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		meta_dentry = lookup_one_len(META_FILENAME,
+ 					     hidden_sto_dentry,
+ 					     strlen(META_FILENAME));
++		mutex_unlock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		if(meta_dentry->d_inode) {
+ 			/* is this necessary? dget(meta_dentry); */
+ 			err = vfs_unlink(hidden_sto_dentry->d_inode,
+@@ -688,9 +698,11 @@ mini_fo_rmdir(inode_t *dir, dentry_t *de
+ #endif
+ 
+ 		/* Delete an old WOL file contained in the storage dir */
++		mutex_lock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		meta_dentry = lookup_one_len(META_FILENAME,
+ 					     hidden_sto_dentry,
+ 					     strlen(META_FILENAME));
++		mutex_unlock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		if(meta_dentry->d_inode) {
+ 			/* is this necessary? dget(meta_dentry); */
+ 			err = vfs_unlink(hidden_sto_dentry->d_inode,
+--- a/fs/mini_fo/meta.c
++++ b/fs/mini_fo/meta.c
+@@ -43,9 +43,11 @@ int meta_build_lists(dentry_t *dentry)
+ 
+   	/* might there be a META-file? */
+ 	if(dtohd2(dentry) && dtohd2(dentry)->d_inode) {
++		mutex_lock(&dtohd2(dentry)->d_inode->i_mutex);
+ 		meta_dentry = lookup_one_len(META_FILENAME,
+ 					     dtohd2(dentry),
+ 					     strlen(META_FILENAME));
++		mutex_unlock(&dtohd2(dentry)->d_inode->i_mutex);
+ 		if(!meta_dentry->d_inode) {
+ 			dput(meta_dentry);
+ 			goto out_ok;
+@@ -426,8 +428,11 @@ int meta_write_d_entry(dentry_t *dentry,
+ 			goto out;
+                 }
+         }
++
++	mutex_lock(&dtohd2(dentry)->d_inode->i_mutex);
+ 	meta_dentry = lookup_one_len(META_FILENAME,
+ 				     dtohd2(dentry), strlen (META_FILENAME));
++	mutex_unlock(&dtohd2(dentry)->d_inode->i_mutex);
+ 
+ 	/* We need to create a META-file */
+         if(!meta_dentry->d_inode) {
+@@ -527,9 +532,13 @@ int meta_write_r_entry(dentry_t *dentry,
+ 			goto out;
+                 }
+         }
++
++	mutex_lock(&dtohd2(dentry)->d_inode->i_mutex);
+ 	meta_dentry = lookup_one_len(META_FILENAME,
+ 				     dtohd2(dentry),
+ 				     strlen (META_FILENAME));
++	mutex_unlock(&dtohd2(dentry)->d_inode->i_mutex);
++
+         if(!meta_dentry->d_inode) {
+                 /* We need to create a META-file */
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+@@ -641,9 +650,13 @@ int meta_sync_d_list(dentry_t *dentry, i
+ 			goto out;
+                 }
+         }
++
++	mutex_lock(&dtohd2(dentry)->d_inode->i_mutex);
+ 	meta_dentry = lookup_one_len(META_FILENAME,
+ 				     dtohd2(dentry),
+ 				     strlen(META_FILENAME));
++	mutex_unlock(&dtohd2(dentry)->d_inode->i_mutex);
++
+         if(!meta_dentry->d_inode) {
+                 /* We need to create a META-file */
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+@@ -784,9 +797,13 @@ int meta_sync_r_list(dentry_t *dentry, i
+ 			goto out;
+                 }
+         }
++
++	mutex_lock(&dtohd2(dentry)->d_inode->i_mutex);
+ 	meta_dentry = lookup_one_len(META_FILENAME,
+ 				     dtohd2(dentry),
+ 				     strlen(META_FILENAME));
++	mutex_unlock(&dtohd2(dentry)->d_inode->i_mutex);
++
+         if(!meta_dentry->d_inode) {
+                 /* We need to create a META-file */
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
diff --git a/target/linux/generic/patches-2.6.30/216-mini_fo_locking.patch b/target/linux/generic/patches-2.6.30/216-mini_fo_locking.patch
new file mode 100644
index 0000000000..4f075920fb
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/216-mini_fo_locking.patch
@@ -0,0 +1,25 @@
+--- a/fs/mini_fo/state.c
++++ b/fs/mini_fo/state.c
+@@ -537,17 +537,17 @@ int nondir_mod_to_del(dentry_t *dentry)
+ 	dtohd(dentry) = NULL;
+ 	dtost(dentry) = DELETED;
+ 
+-	/* add deleted file to META-file */
+-	meta_add_d_entry(dentry->d_parent,
+-			 dentry->d_name.name,
+-			 dentry->d_name.len);
+-
+ 	/* was: unlock_dir(hidden_sto_dir_dentry); */
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
+ 	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
+ #else
+ 	up(&hidden_sto_dir_dentry->d_inode->i_sem);
+ #endif
++	/* add deleted file to META-file */
++	meta_add_d_entry(dentry->d_parent,
++			 dentry->d_name.name,
++			 dentry->d_name.len);
++
+ 	dput(hidden_sto_dir_dentry);
+ 
+  out:
diff --git a/target/linux/generic/patches-2.6.30/219-kobject_uevent.patch b/target/linux/generic/patches-2.6.30/219-kobject_uevent.patch
new file mode 100644
index 0000000000..7e00b224cc
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/219-kobject_uevent.patch
@@ -0,0 +1,42 @@
+--- a/lib/kobject_uevent.c
++++ b/lib/kobject_uevent.c
+@@ -29,7 +29,8 @@ u64 uevent_seqnum;
+ char uevent_helper[UEVENT_HELPER_PATH_LEN] = CONFIG_UEVENT_HELPER_PATH;
+ static DEFINE_SPINLOCK(sequence_lock);
+ #if defined(CONFIG_NET)
+-static struct sock *uevent_sock;
++struct sock *uevent_sock = NULL;
++EXPORT_SYMBOL_GPL(uevent_sock);
+ #endif
+ 
+ /* the strings here must match the enum in include/linux/kobject.h */
+@@ -42,6 +43,18 @@ static const char *kobject_actions[] = {
+ 	[KOBJ_OFFLINE] =	"offline",
+ };
+ 
++u64 uevent_next_seqnum(void)
++{
++	u64 seq;
++
++	spin_lock(&sequence_lock);
++	seq = ++uevent_seqnum;
++	spin_unlock(&sequence_lock);
++
++	return seq;
++}
++EXPORT_SYMBOL_GPL(uevent_next_seqnum);
++
+ /**
+  * kobject_action_type - translate action string to numeric type
+  *
+@@ -201,9 +214,7 @@ int kobject_uevent_env(struct kobject *k
+ 		kobj->state_remove_uevent_sent = 1;
+ 
+ 	/* we will send an event, so request a new sequence number */
+-	spin_lock(&sequence_lock);
+-	seq = ++uevent_seqnum;
+-	spin_unlock(&sequence_lock);
++	seq = uevent_next_seqnum();
+ 	retval = add_uevent_var(env, "SEQNUM=%llu", (unsigned long long)seq);
+ 	if (retval)
+ 		goto exit;
diff --git a/target/linux/generic/patches-2.6.30/220-sound_kconfig.patch b/target/linux/generic/patches-2.6.30/220-sound_kconfig.patch
new file mode 100644
index 0000000000..f374009a65
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/220-sound_kconfig.patch
@@ -0,0 +1,11 @@
+--- a/sound/core/Kconfig
++++ b/sound/core/Kconfig
+@@ -7,7 +7,7 @@ config SND_PCM
+ 	select SND_TIMER
+ 
+ config SND_HWDEP
+-	tristate
++	tristate "Sound hardware support"
+ 
+ config SND_RAWMIDI
+ 	tristate
diff --git a/target/linux/generic/patches-2.6.30/221-binfmt_elf_gcc4.1.patch b/target/linux/generic/patches-2.6.30/221-binfmt_elf_gcc4.1.patch
new file mode 100644
index 0000000000..fa891e0f3d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/221-binfmt_elf_gcc4.1.patch
@@ -0,0 +1,11 @@
+--- a/fs/binfmt_elf.c
++++ b/fs/binfmt_elf.c
+@@ -1193,7 +1193,7 @@ static unsigned long vma_dump_size(struc
+ 	if (FILTER(ELF_HEADERS) &&
+ 	    vma->vm_pgoff == 0 && (vma->vm_flags & VM_READ)) {
+ 		u32 __user *header = (u32 __user *) vma->vm_start;
+-		u32 word;
++		u32 word = 0;
+ 		mm_segment_t fs = get_fs();
+ 		/*
+ 		 * Doing it this way gets the constant folded by GCC.
diff --git a/target/linux/generic/patches-2.6.30/222-partial_eraseblock_write.patch b/target/linux/generic/patches-2.6.30/222-partial_eraseblock_write.patch
new file mode 100644
index 0000000000..dfabeaa9ad
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/222-partial_eraseblock_write.patch
@@ -0,0 +1,146 @@
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -21,6 +21,8 @@
+ #include <linux/root_dev.h>
+ #include <linux/magic.h>
+ 
++#define MTD_ERASE_PARTIAL	0x8000 /* partition only covers parts of an erase block */
++
+ /* Our partition linked list */
+ static LIST_HEAD(mtd_partitions);
+ 
+@@ -228,13 +230,60 @@ static int part_erase(struct mtd_info *m
+ 		return -EROFS;
+ 	if (instr->addr >= mtd->size)
+ 		return -EINVAL;
++
++	instr->partial_start = false;
++	if (mtd->flags & MTD_ERASE_PARTIAL) {
++		size_t readlen = 0;
++		u64 mtd_ofs;
++
++		instr->erase_buf = kmalloc(part->master->erasesize, GFP_ATOMIC);
++		if (!instr->erase_buf)
++			return -ENOMEM;
++
++		mtd_ofs = part->offset + instr->addr;
++		instr->erase_buf_ofs = do_div(mtd_ofs, part->master->erasesize);
++
++		if (instr->erase_buf_ofs > 0) {
++			instr->addr -= instr->erase_buf_ofs;
++			ret = part->master->read(part->master,
++				instr->addr + part->offset,
++				part->master->erasesize,
++				&readlen, instr->erase_buf);
++
++			instr->partial_start = true;
++		} else {
++			mtd_ofs = part->offset + part->mtd.size;
++			instr->erase_buf_ofs = part->master->erasesize -
++				do_div(mtd_ofs, part->master->erasesize);
++
++			if (instr->erase_buf_ofs > 0) {
++				instr->len += instr->erase_buf_ofs;
++				ret = part->master->read(part->master,
++					part->offset + instr->addr +
++					instr->len - part->master->erasesize,
++					part->master->erasesize, &readlen,
++					instr->erase_buf);
++			} else {
++				ret = 0;
++			}
++		}
++		if (ret < 0) {
++			kfree(instr->erase_buf);
++			return ret;
++		}
++
++	}
++
+ 	instr->addr += part->offset;
+ 	ret = part->master->erase(part->master, instr);
+ 	if (ret) {
+ 		if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
+ 			instr->fail_addr -= part->offset;
+ 		instr->addr -= part->offset;
++		if (mtd->flags & MTD_ERASE_PARTIAL)
++			kfree(instr->erase_buf);
+ 	}
++
+ 	return ret;
+ }
+ 
+@@ -242,7 +291,25 @@ void mtd_erase_callback(struct erase_inf
+ {
+ 	if (instr->mtd->erase == part_erase) {
+ 		struct mtd_part *part = PART(instr->mtd);
++		size_t wrlen = 0;
+ 
++		if (instr->mtd->flags & MTD_ERASE_PARTIAL) {
++			if (instr->partial_start) {
++				part->master->write(part->master,
++					instr->addr, instr->erase_buf_ofs,
++					&wrlen, instr->erase_buf);
++				instr->addr += instr->erase_buf_ofs;
++			} else {
++				instr->len -= instr->erase_buf_ofs;
++				part->master->write(part->master,
++					instr->addr + instr->len,
++					instr->erase_buf_ofs, &wrlen,
++					instr->erase_buf +
++					part->master->erasesize -
++					instr->erase_buf_ofs);
++			}
++			kfree(instr->erase_buf);
++		}
+ 		if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
+ 			instr->fail_addr -= part->offset;
+ 		instr->addr -= part->offset;
+@@ -476,18 +543,24 @@ static struct mtd_part *add_one_partitio
+ 	if ((slave->mtd.flags & MTD_WRITEABLE) &&
+ 	    mtd_mod_by_eb(slave->offset, &slave->mtd)) {
+ 		/* Doesn't start on a boundary of major erase size */
+-		/* FIXME: Let it be writable if it is on a boundary of
+-		 * _minor_ erase size though */
+-		slave->mtd.flags &= ~MTD_WRITEABLE;
+-		printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
+-			part->name);
++		slave->mtd.flags |= MTD_ERASE_PARTIAL;
++		if (((u32) slave->mtd.size) > master->erasesize)
++			slave->mtd.flags &= ~MTD_WRITEABLE;
++		else
++			slave->mtd.erasesize = slave->mtd.size;
+ 	}
+ 	if ((slave->mtd.flags & MTD_WRITEABLE) &&
+-	    mtd_mod_by_eb(slave->mtd.size, &slave->mtd)) {
+-		slave->mtd.flags &= ~MTD_WRITEABLE;
+-		printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
+-			part->name);
+-	}
++	    mtd_mod_by_eb(slave->offset + slave->mtd.size, &slave->mtd)) {
++		slave->mtd.flags |= MTD_ERASE_PARTIAL;
++
++		if ((u32) slave->mtd.size > master->erasesize)
++			slave->mtd.flags &= ~MTD_WRITEABLE;
++		else
++			slave->mtd.erasesize = slave->mtd.size;
++	}
++	if ((slave->mtd.flags & (MTD_ERASE_PARTIAL|MTD_WRITEABLE)) == MTD_ERASE_PARTIAL)
++		printk(KERN_WARNING"mtd: partition \"%s\" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only\n",
++				part->name);
+ 
+ 	slave->mtd.ecclayout = master->ecclayout;
+ 	if (master->block_isbad) {
+--- a/include/linux/mtd/mtd.h
++++ b/include/linux/mtd/mtd.h
+@@ -46,6 +46,10 @@ struct erase_info {
+ 	u_long priv;
+ 	u_char state;
+ 	struct erase_info *next;
++
++	u8 *erase_buf;
++	u32 erase_buf_ofs;
++	bool partial_start;
+ };
+ 
+ struct mtd_erase_region_info {
diff --git a/target/linux/generic/patches-2.6.30/240-packet_socket_type.patch b/target/linux/generic/patches-2.6.30/240-packet_socket_type.patch
new file mode 100644
index 0000000000..d86fcf3bc2
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/240-packet_socket_type.patch
@@ -0,0 +1,132 @@
+This patch allows the user to specify desired packet types (outgoing,
+broadcast, unicast, etc.) on packet sockets via setsockopt.
+This can reduce the load in situations where only a limited number
+of packet types are necessary
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+
+--- a/include/linux/if_packet.h
++++ b/include/linux/if_packet.h
+@@ -31,6 +31,8 @@ struct sockaddr_ll
+ /* These ones are invisible by user level */
+ #define PACKET_LOOPBACK		5		/* MC/BRD frame looped back */
+ #define PACKET_FASTROUTE	6		/* Fastrouted frame	*/
++#define PACKET_MASK_ANY		0xffffffff	/* mask for packet type bits */
++
+ 
+ /* Packet socket options */
+ 
+@@ -46,6 +48,7 @@ struct sockaddr_ll
+ #define PACKET_VERSION			10
+ #define PACKET_HDRLEN			11
+ #define PACKET_RESERVE			12
++#define PACKET_RECV_TYPE		13
+ 
+ struct tpacket_stats
+ {
+--- a/net/packet/af_packet.c
++++ b/net/packet/af_packet.c
+@@ -192,6 +192,7 @@ struct packet_sock {
+ 	unsigned int		tp_hdrlen;
+ 	unsigned int		tp_reserve;
+ #endif
++	unsigned int		pkt_type;
+ };
+ 
+ struct packet_skb_cb {
+@@ -282,6 +283,7 @@ static int packet_rcv_spkt(struct sk_buf
+ {
+ 	struct sock *sk;
+ 	struct sockaddr_pkt *spkt;
++	struct packet_sock *po;
+ 
+ 	/*
+ 	 *	When we registered the protocol we saved the socket in the data
+@@ -289,6 +291,7 @@ static int packet_rcv_spkt(struct sk_buf
+ 	 */
+ 
+ 	sk = pt->af_packet_priv;
++	po = pkt_sk(sk);
+ 
+ 	/*
+ 	 *	Yank back the headers [hope the device set this
+@@ -301,7 +304,7 @@ static int packet_rcv_spkt(struct sk_buf
+ 	 *	so that this procedure is noop.
+ 	 */
+ 
+-	if (skb->pkt_type == PACKET_LOOPBACK)
++	if (!(po->pkt_type & (1 << skb->pkt_type)))
+ 		goto out;
+ 
+ 	if (dev_net(dev) != sock_net(sk))
+@@ -486,12 +489,12 @@ static int packet_rcv(struct sk_buff *sk
+ 	int skb_len = skb->len;
+ 	unsigned int snaplen, res;
+ 
+-	if (skb->pkt_type == PACKET_LOOPBACK)
+-		goto drop;
+-
+ 	sk = pt->af_packet_priv;
+ 	po = pkt_sk(sk);
+ 
++	if (!(po->pkt_type & (1 << skb->pkt_type)))
++		goto drop;
++
+ 	if (dev_net(dev) != sock_net(sk))
+ 		goto drop;
+ 
+@@ -608,12 +611,12 @@ static int tpacket_rcv(struct sk_buff *s
+ 	struct timeval tv;
+ 	struct timespec ts;
+ 
+-	if (skb->pkt_type == PACKET_LOOPBACK)
+-		goto drop;
+-
+ 	sk = pt->af_packet_priv;
+ 	po = pkt_sk(sk);
+ 
++	if (!(po->pkt_type & (1 << skb->pkt_type)))
++		goto drop;
++
+ 	if (dev_net(dev) != sock_net(sk))
+ 		goto drop;
+ 
+@@ -1072,6 +1075,7 @@ static int packet_create(struct net *net
+ 	spin_lock_init(&po->bind_lock);
+ 	mutex_init(&po->pg_vec_lock);
+ 	po->prot_hook.func = packet_rcv;
++	po->pkt_type = PACKET_MASK_ANY & ~(1 << PACKET_LOOPBACK);
+ 
+ 	if (sock->type == SOCK_PACKET)
+ 		po->prot_hook.func = packet_rcv_spkt;
+@@ -1412,6 +1416,16 @@ packet_setsockopt(struct socket *sock, i
+ 			ret = packet_mc_drop(sk, &mreq);
+ 		return ret;
+ 	}
++	case PACKET_RECV_TYPE:
++	{
++		unsigned int val;
++		if (optlen != sizeof(val))
++			return -EINVAL;
++		if (copy_from_user(&val, optval, sizeof(val)))
++			return -EFAULT;
++		po->pkt_type = val & ~PACKET_LOOPBACK;
++		return 0;
++	}
+ 
+ #ifdef CONFIG_PACKET_MMAP
+ 	case PACKET_RX_RING:
+@@ -1543,6 +1557,13 @@ static int packet_getsockopt(struct sock
+ 
+ 		data = &val;
+ 		break;
++	case PACKET_RECV_TYPE:
++		if (len > sizeof(unsigned int))
++			len = sizeof(unsigned int);
++		val = po->pkt_type;
++
++		data = &val;
++		break;
+ #ifdef CONFIG_PACKET_MMAP
+ 	case PACKET_VERSION:
+ 		if (len > sizeof(int))
diff --git a/target/linux/generic/patches-2.6.30/250-pppoe_header_pad.patch b/target/linux/generic/patches-2.6.30/250-pppoe_header_pad.patch
new file mode 100644
index 0000000000..042546f317
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/250-pppoe_header_pad.patch
@@ -0,0 +1,20 @@
+--- a/drivers/net/pppoe.c
++++ b/drivers/net/pppoe.c
+@@ -863,7 +863,7 @@ static int pppoe_sendmsg(struct kiocb *i
+ 		goto end;
+ 
+ 
+-	skb = sock_wmalloc(sk, total_len + dev->hard_header_len + 32,
++	skb = sock_wmalloc(sk, total_len + dev->hard_header_len + 32 + NET_SKB_PAD,
+ 			   0, GFP_KERNEL);
+ 	if (!skb) {
+ 		error = -ENOMEM;
+@@ -871,7 +871,7 @@ static int pppoe_sendmsg(struct kiocb *i
+ 	}
+ 
+ 	/* Reserve space for headers. */
+-	skb_reserve(skb, dev->hard_header_len);
++	skb_reserve(skb, dev->hard_header_len + NET_SKB_PAD);
+ 	skb_reset_network_header(skb);
+ 
+ 	skb->dev = dev;
diff --git a/target/linux/generic/patches-2.6.30/251-atm.patch b/target/linux/generic/patches-2.6.30/251-atm.patch
new file mode 100644
index 0000000000..238d6f81c4
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/251-atm.patch
@@ -0,0 +1,12 @@
+--- a/include/linux/atm.h
++++ b/include/linux/atm.h
+@@ -139,6 +139,9 @@ struct atm_trafprm {
+ 	int		min_pcr;	/* minimum PCR in cells per second */
+ 	int		max_cdv;	/* maximum CDV in microseconds */
+ 	int		max_sdu;	/* maximum SDU in bytes */
++	int		scr;		/* sustained rate in cells per second */
++	int		mbs;		/* maximum burst size (MBS) in cells */
++	int		cdv;		/* Cell delay varition */
+         /* extra params for ABR */
+         unsigned int 	icr;         	/* Initial Cell Rate (24-bit) */
+         unsigned int	tbe;		/* Transient Buffer Exposure (24-bit) */ 
diff --git a/target/linux/generic/patches-2.6.30/260-extend_pfifo_fast.patch b/target/linux/generic/patches-2.6.30/260-extend_pfifo_fast.patch
new file mode 100644
index 0000000000..ad9e9badd3
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/260-extend_pfifo_fast.patch
@@ -0,0 +1,144 @@
+--- a/net/sched/sch_generic.c
++++ b/net/sched/sch_generic.c
+@@ -371,16 +371,50 @@ static const u8 prio2band[TC_PRIO_MAX+1]
+ 
+ #define PFIFO_FAST_BANDS 3
+ 
++struct pfifo_fast_sched_data {
++	struct tcf_proto *filter_list;
++	struct sk_buff_head list[PFIFO_FAST_BANDS];
++};
++
+ static inline struct sk_buff_head *prio2list(struct sk_buff *skb,
+ 					     struct Qdisc *qdisc)
+ {
+-	struct sk_buff_head *list = qdisc_priv(qdisc);
++	struct pfifo_fast_sched_data *q = qdisc_priv(qdisc);
++	struct sk_buff_head *list = q->list;
+ 	return list + prio2band[skb->priority & TC_PRIO_MAX];
+ }
+ 
++static int pfifo_fast_filter(struct sk_buff *skb, struct Qdisc* qdisc)
++{
++#ifdef CONFIG_NET_CLS_ACT
++	struct pfifo_fast_sched_data *q = qdisc_priv(qdisc);
++	int result = 0, ret = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN;
++	struct tcf_result res;
++
++	if (q->filter_list != NULL)
++		result = tc_classify(skb, q->filter_list, &res);
++	if (result >= 0) {
++		switch (result) {
++		case TC_ACT_STOLEN:
++		case TC_ACT_QUEUED:
++			ret = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN;
++		case TC_ACT_SHOT:
++			kfree_skb(skb);
++			return ret;
++		}
++	}
++#endif
++	return 0;
++}
++
+ static int pfifo_fast_enqueue(struct sk_buff *skb, struct Qdisc* qdisc)
+ {
+ 	struct sk_buff_head *list = prio2list(skb, qdisc);
++	int ret;
++
++	ret = pfifo_fast_filter(skb, qdisc);
++	if (ret)
++		return ret;
+ 
+ 	if (skb_queue_len(list) < qdisc_dev(qdisc)->tx_queue_len) {
+ 		qdisc->q.qlen++;
+@@ -392,8 +426,9 @@ static int pfifo_fast_enqueue(struct sk_
+ 
+ static struct sk_buff *pfifo_fast_dequeue(struct Qdisc* qdisc)
+ {
++	struct pfifo_fast_sched_data *q = qdisc_priv(qdisc);
++	struct sk_buff_head *list = q->list;
+ 	int prio;
+-	struct sk_buff_head *list = qdisc_priv(qdisc);
+ 
+ 	for (prio = 0; prio < PFIFO_FAST_BANDS; prio++) {
+ 		if (!skb_queue_empty(list + prio)) {
+@@ -420,8 +455,9 @@ static struct sk_buff *pfifo_fast_peek(s
+ 
+ static void pfifo_fast_reset(struct Qdisc* qdisc)
+ {
++	struct pfifo_fast_sched_data *q = qdisc_priv(qdisc);
++	struct sk_buff_head *list = q->list;
+ 	int prio;
+-	struct sk_buff_head *list = qdisc_priv(qdisc);
+ 
+ 	for (prio = 0; prio < PFIFO_FAST_BANDS; prio++)
+ 		__qdisc_reset_queue(qdisc, list + prio);
+@@ -444,8 +480,9 @@ nla_put_failure:
+ 
+ static int pfifo_fast_init(struct Qdisc *qdisc, struct nlattr *opt)
+ {
++	struct pfifo_fast_sched_data *q = qdisc_priv(qdisc);
++	struct sk_buff_head *list = q->list;
+ 	int prio;
+-	struct sk_buff_head *list = qdisc_priv(qdisc);
+ 
+ 	for (prio = 0; prio < PFIFO_FAST_BANDS; prio++)
+ 		skb_queue_head_init(list + prio);
+@@ -453,9 +490,36 @@ static int pfifo_fast_init(struct Qdisc 
+ 	return 0;
+ }
+ 
++static int pfifo_fast_change_class(struct Qdisc *qdisc, u32 classid, u32 parentid,
++			    struct nlattr **tca, unsigned long *arg)
++{
++	return -EOPNOTSUPP;
++}
++
++static unsigned long pfifo_fast_get(struct Qdisc *qdisc, u32 classid)
++{
++	return 0;
++}
++
++static struct tcf_proto **pfifo_fast_find_tcf(struct Qdisc *qdisc, unsigned long cl)
++{
++	struct pfifo_fast_sched_data *q = qdisc_priv(qdisc);
++
++	if (cl)
++		return NULL;
++	return &q->filter_list;
++}
++
++static const struct Qdisc_class_ops pfifo_fast_class_ops = {
++	.get		=	pfifo_fast_get,
++	.change		=	pfifo_fast_change_class,
++	.tcf_chain	=	pfifo_fast_find_tcf,
++};
++
+ static struct Qdisc_ops pfifo_fast_ops __read_mostly = {
+ 	.id		=	"pfifo_fast",
+-	.priv_size	=	PFIFO_FAST_BANDS * sizeof(struct sk_buff_head),
++	.cl_ops		=	&pfifo_fast_class_ops,
++	.priv_size	=	sizeof(struct pfifo_fast_sched_data),
+ 	.enqueue	=	pfifo_fast_enqueue,
+ 	.dequeue	=	pfifo_fast_dequeue,
+ 	.peek		=	pfifo_fast_peek,
+@@ -735,3 +799,18 @@ void dev_shutdown(struct net_device *dev
+ 	shutdown_scheduler_queue(dev, &dev->rx_queue, &noop_qdisc);
+ 	WARN_ON(timer_pending(&dev->watchdog_timer));
+ }
++
++#ifdef CONFIG_NET_SCHED
++static int __init sch_generic_init(void)
++{
++	return register_qdisc(&pfifo_fast_ops);
++}
++
++static void __exit sch_generic_exit(void)
++{
++	unregister_qdisc(&pfifo_fast_ops);
++}
++
++module_init(sch_generic_init)
++module_exit(sch_generic_exit)
++#endif
diff --git a/target/linux/generic/patches-2.6.30/270-sched_bfs.patch b/target/linux/generic/patches-2.6.30/270-sched_bfs.patch
new file mode 100644
index 0000000000..f521b3239c
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/270-sched_bfs.patch
@@ -0,0 +1,6411 @@
+This patch adds support for bfs v230, modified for diff size reduction
+
+--- a/Documentation/sysctl/kernel.txt
++++ b/Documentation/sysctl/kernel.txt
+@@ -27,6 +27,7 @@ show up in /proc/sys/kernel:
+ - domainname
+ - hostname
+ - hotplug
++- iso_cpu
+ - java-appletviewer           [ binfmt_java, obsolete ]
+ - java-interpreter            [ binfmt_java, obsolete ]
+ - kstack_depth_to_print       [ X86 only ]
+@@ -48,6 +49,7 @@ show up in /proc/sys/kernel:
+ - randomize_va_space
+ - real-root-dev               ==> Documentation/initrd.txt
+ - reboot-cmd                  [ SPARC only ]
++- rr_interval
+ - rtsig-max
+ - rtsig-nr
+ - sem
+@@ -170,6 +172,16 @@ Default value is "/sbin/hotplug".
+ 
+ ==============================================================
+ 
++iso_cpu: (BFS only)
++
++This sets the percentage cpu that the unprivileged SCHED_ISO tasks can
++run effectively at realtime priority, averaged over a rolling five
++seconds over the -whole- system, meaning all cpus.
++
++Set to 70 (percent) by default.
++
++==============================================================
++
+ l2cr: (PPC only)
+ 
+ This flag controls the L2 cache of G3 processor boards. If
+@@ -322,6 +334,19 @@ rebooting. ???
+ 
+ ==============================================================
+ 
++rr_interval: (BFS only)
++
++This is the smallest duration that any cpu process scheduling unit
++will run for. Increasing this value can increase throughput of cpu
++bound tasks substantially but at the expense of increased latencies
++overall. This value is in milliseconds and the default value chosen
++depends on the number of cpus available at scheduler initialisation
++with a minimum of 6.
++
++Valid values are from 1-5000.
++
++==============================================================
++
+ rtsig-max & rtsig-nr:
+ 
+ The file rtsig-max can be used to tune the maximum number
+--- a/include/linux/init_task.h
++++ b/include/linux/init_task.h
+@@ -119,9 +119,10 @@ extern struct cred init_cred;
+ 	.usage		= ATOMIC_INIT(2),				\
+ 	.flags		= PF_KTHREAD,					\
+ 	.lock_depth	= -1,						\
+-	.prio		= MAX_PRIO-20,					\
++	.prio		= NORMAL_PRIO,					\
+ 	.static_prio	= MAX_PRIO-20,					\
+-	.normal_prio	= MAX_PRIO-20,					\
++	.normal_prio	= NORMAL_PRIO,					\
++	.deadline	= 0,						\
+ 	.policy		= SCHED_NORMAL,					\
+ 	.cpus_allowed	= CPU_MASK_ALL,					\
+ 	.mm		= NULL,						\
+--- a/include/linux/sched.h
++++ b/include/linux/sched.h
+@@ -36,9 +36,12 @@
+ #define SCHED_FIFO		1
+ #define SCHED_RR		2
+ #define SCHED_BATCH		3
+-/* SCHED_ISO: reserved but not implemented yet */
++#define SCHED_ISO		4
+ #define SCHED_IDLE		5
+ 
++#define SCHED_MAX		(SCHED_IDLE)
++#define SCHED_RANGE(policy)	((policy) <= SCHED_MAX)
++
+ #ifdef __KERNEL__
+ 
+ struct sched_param {
+@@ -1042,10 +1045,13 @@ struct sched_entity {
+ 	struct load_weight	load;		/* for load-balancing */
+ 	struct rb_node		run_node;
+ 	struct list_head	group_node;
++#ifdef CONFIG_SCHED_CFS
+ 	unsigned int		on_rq;
+ 
+ 	u64			exec_start;
++#endif
+ 	u64			sum_exec_runtime;
++#ifdef CONFIG_SCHED_CFS
+ 	u64			vruntime;
+ 	u64			prev_sum_exec_runtime;
+ 
+@@ -1096,6 +1102,7 @@ struct sched_entity {
+ 	/* rq "owned" by this entity/group: */
+ 	struct cfs_rq		*my_q;
+ #endif
++#endif
+ };
+ 
+ struct sched_rt_entity {
+@@ -1123,17 +1130,19 @@ struct task_struct {
+ 
+ 	int lock_depth;		/* BKL lock depth */
+ 
+-#ifdef CONFIG_SMP
+-#ifdef __ARCH_WANT_UNLOCKED_CTXSW
+ 	int oncpu;
+-#endif
+-#endif
+-
+ 	int prio, static_prio, normal_prio;
+ 	unsigned int rt_priority;
+ 	const struct sched_class *sched_class;
+ 	struct sched_entity se;
+ 	struct sched_rt_entity rt;
++	unsigned long deadline;
++#ifdef CONFIG_SCHED_BFS
++	int load_weight;	/* for niceness load balancing purposes */
++	int first_time_slice;
++	unsigned long long timestamp, last_ran;
++	unsigned long utime_pc, stime_pc;
++#endif
+ 
+ #ifdef CONFIG_PREEMPT_NOTIFIERS
+ 	/* list of struct preempt_notifier: */
+@@ -1156,6 +1165,9 @@ struct task_struct {
+ 
+ 	unsigned int policy;
+ 	cpumask_t cpus_allowed;
++#ifdef CONFIG_HOTPLUG_CPU
++	cpumask_t unplugged_mask;
++#endif
+ 
+ #ifdef CONFIG_PREEMPT_RCU
+ 	int rcu_read_lock_nesting;
+@@ -1446,11 +1458,19 @@ struct task_struct {
+  * priority to a value higher than any user task. Note:
+  * MAX_RT_PRIO must not be smaller than MAX_USER_RT_PRIO.
+  */
+-
++#define PRIO_RANGE		(40)
+ #define MAX_USER_RT_PRIO	100
+ #define MAX_RT_PRIO		MAX_USER_RT_PRIO
+-
++#ifdef CONFIG_SCHED_BFS
++#define MAX_PRIO		(MAX_RT_PRIO + PRIO_RANGE)
++#define ISO_PRIO		(MAX_RT_PRIO)
++#define NORMAL_PRIO		(MAX_RT_PRIO + 1)
++#define IDLE_PRIO		(MAX_RT_PRIO + 2)
++#define PRIO_LIMIT		((IDLE_PRIO) + 1)
++#else
+ #define MAX_PRIO		(MAX_RT_PRIO + 40)
++#define NORMAL_PRIO	(MAX_RT_PRIO - 20)
++#endif
+ #define DEFAULT_PRIO		(MAX_RT_PRIO + 20)
+ 
+ static inline int rt_prio(int prio)
+@@ -1734,7 +1754,7 @@ task_sched_runtime(struct task_struct *t
+ extern unsigned long long thread_group_sched_runtime(struct task_struct *task);
+ 
+ /* sched_exec is called by processes performing an exec */
+-#ifdef CONFIG_SMP
++#if defined(CONFIG_SMP) && defined(CONFIG_SCHED_CFS)
+ extern void sched_exec(void);
+ #else
+ #define sched_exec()   {}
+--- a/init/Kconfig
++++ b/init/Kconfig
+@@ -435,9 +435,22 @@ config LOG_BUF_SHIFT
+ config HAVE_UNSTABLE_SCHED_CLOCK
+ 	bool
+ 
++choice
++	prompt "Scheduler"
++	default SCHED_CFS
++
++	config SCHED_CFS
++		bool "CFS"
++
++	config SCHED_BFS
++		bool "BFS"
++
++endchoice
++
+ config GROUP_SCHED
+ 	bool "Group CPU scheduler"
+ 	depends on EXPERIMENTAL
++	depends on SCHED_CFS
+ 	default n
+ 	help
+ 	  This feature lets CPU scheduler recognize task groups and control CPU
+@@ -488,6 +501,7 @@ endchoice
+ 
+ menuconfig CGROUPS
+ 	boolean "Control Group support"
++	depends on SCHED_CFS
+ 	help
+ 	  This option adds support for grouping sets of processes together, for
+ 	  use with process control subsystems such as Cpusets, CFS, memory
+--- a/kernel/Makefile
++++ b/kernel/Makefile
+@@ -2,7 +2,7 @@
+ # Makefile for the linux kernel.
+ #
+ 
+-obj-y     = sched.o fork.o exec_domain.o panic.o printk.o \
++obj-y     = $(if $(CONFIG_SCHED_CFS),sched.o,sched_bfs.o) fork.o exec_domain.o panic.o printk.o \
+ 	    cpu.o exit.o itimer.o time.o softirq.o resource.o \
+ 	    sysctl.o capability.o ptrace.o timer.o user.o \
+ 	    signal.o sys.o kmod.o workqueue.o pid.o \
+@@ -103,6 +103,7 @@ ifneq ($(CONFIG_SCHED_OMIT_FRAME_POINTER
+ # I turn this off for IA-64 only.  Andreas Schwab says it's also needed on m68k
+ # to get a correct value for the wait-channel (WCHAN in ps). --davidm
+ CFLAGS_sched.o := $(PROFILING) -fno-omit-frame-pointer
++CFLAGS_sched_bfs.o := $(PROFILING) -fno-omit-frame-pointer
+ endif
+ 
+ $(obj)/configs.o: $(obj)/config_data.h
+--- a/kernel/kthread.c
++++ b/kernel/kthread.c
+@@ -15,7 +15,11 @@
+ #include <linux/mutex.h>
+ #include <trace/sched.h>
+ 
++#ifdef CONFIG_SCHED_BFS
++#define KTHREAD_NICE_LEVEL (0)
++#else
+ #define KTHREAD_NICE_LEVEL (-5)
++#endif
+ 
+ static DEFINE_SPINLOCK(kthread_create_lock);
+ static LIST_HEAD(kthread_create_list);
+--- /dev/null
++++ b/kernel/sched_bfs.c
+@@ -0,0 +1,6059 @@
++/*
++ *  kernel/sched_bfs.c, was sched.c
++ *
++ *  Kernel scheduler and related syscalls
++ *
++ *  Copyright (C) 1991-2002  Linus Torvalds
++ *
++ *  1996-12-23  Modified by Dave Grothe to fix bugs in semaphores and
++ *		make semaphores SMP safe
++ *  1998-11-19	Implemented schedule_timeout() and related stuff
++ *		by Andrea Arcangeli
++ *  2002-01-04	New ultra-scalable O(1) scheduler by Ingo Molnar:
++ *		hybrid priority-list and round-robin design with
++ *		an array-switch method of distributing timeslices
++ *		and per-CPU runqueues.  Cleanups and useful suggestions
++ *		by Davide Libenzi, preemptible kernel bits by Robert Love.
++ *  2003-09-03	Interactivity tuning by Con Kolivas.
++ *  2004-04-02	Scheduler domains code by Nick Piggin
++ *  2007-04-15  Work begun on replacing all interactivity tuning with a
++ *              fair scheduling design by Con Kolivas.
++ *  2007-05-05  Load balancing (smp-nice) and other improvements
++ *              by Peter Williams
++ *  2007-05-06  Interactivity improvements to CFS by Mike Galbraith
++ *  2007-07-01  Group scheduling enhancements by Srivatsa Vaddagiri
++ *  2007-11-29  RT balancing improvements by Steven Rostedt, Gregory Haskins,
++ *              Thomas Gleixner, Mike Kravetz
++ *  now		Brainfuck deadline scheduling policy by Con Kolivas deletes
++ *              a whole lot of those previous things.
++ */
++
++#include <linux/mm.h>
++#include <linux/module.h>
++#include <linux/nmi.h>
++#include <linux/init.h>
++#include <asm/uaccess.h>
++#include <linux/highmem.h>
++#include <linux/smp_lock.h>
++#include <asm/mmu_context.h>
++#include <linux/interrupt.h>
++#include <linux/capability.h>
++#include <linux/completion.h>
++#include <linux/kernel_stat.h>
++#include <linux/debug_locks.h>
++#include <linux/perf_counter.h>
++#include <linux/security.h>
++#include <linux/notifier.h>
++#include <linux/profile.h>
++#include <linux/freezer.h>
++#include <linux/vmalloc.h>
++#include <linux/blkdev.h>
++#include <linux/delay.h>
++#include <linux/smp.h>
++#include <linux/threads.h>
++#include <linux/timer.h>
++#include <linux/rcupdate.h>
++#include <linux/cpu.h>
++#include <linux/cpuset.h>
++#include <linux/cpumask.h>
++#include <linux/percpu.h>
++#include <linux/kthread.h>
++#include <linux/proc_fs.h>
++#include <linux/seq_file.h>
++#include <linux/syscalls.h>
++#include <linux/times.h>
++#include <linux/tsacct_kern.h>
++#include <linux/kprobes.h>
++#include <linux/delayacct.h>
++#include <linux/reciprocal_div.h>
++#include <linux/log2.h>
++#include <linux/bootmem.h>
++#include <linux/ftrace.h>
++
++#include <asm/tlb.h>
++#include <asm/unistd.h>
++
++#define CREATE_TRACE_POINTS
++#include <trace/events/sched.h>
++
++#define rt_prio(prio)		unlikely((prio) < MAX_RT_PRIO)
++#define rt_task(p)		rt_prio((p)->prio)
++#define rt_queue(rq)		rt_prio((rq)->rq_prio)
++#define batch_task(p)		(unlikely((p)->policy == SCHED_BATCH))
++#define is_rt_policy(policy)	((policy) == SCHED_FIFO || \
++					(policy) == SCHED_RR)
++#define has_rt_policy(p)	unlikely(is_rt_policy((p)->policy))
++#define idleprio_task(p)	unlikely((p)->policy == SCHED_IDLE)
++#define iso_task(p)		unlikely((p)->policy == SCHED_ISO)
++#define iso_queue(rq)		unlikely((rq)->rq_policy == SCHED_ISO)
++#define ISO_PERIOD		((5 * HZ * num_online_cpus()) + 1)
++
++/*
++ * Convert user-nice values [ -20 ... 0 ... 19 ]
++ * to static priority [ MAX_RT_PRIO..MAX_PRIO-1 ],
++ * and back.
++ */
++#define NICE_TO_PRIO(nice)	(MAX_RT_PRIO + (nice) + 20)
++#define PRIO_TO_NICE(prio)	((prio) - MAX_RT_PRIO - 20)
++#define TASK_NICE(p)		PRIO_TO_NICE((p)->static_prio)
++
++/*
++ * 'User priority' is the nice value converted to something we
++ * can work with better when scaling various scheduler parameters,
++ * it's a [ 0 ... 39 ] range.
++ */
++#define USER_PRIO(p)		((p)-MAX_RT_PRIO)
++#define TASK_USER_PRIO(p)	USER_PRIO((p)->static_prio)
++#define MAX_USER_PRIO		(USER_PRIO(MAX_PRIO))
++#define SCHED_PRIO(p)		((p)+MAX_RT_PRIO)
++
++/* Some helpers for converting to/from various scales.*/
++#define JIFFIES_TO_NS(TIME)	((TIME) * (1000000000 / HZ))
++#define MS_TO_NS(TIME)		((TIME) * 1000000)
++#define MS_TO_US(TIME)		((TIME) * 1000)
++
++#ifdef CONFIG_SMP
++/*
++ * Divide a load by a sched group cpu_power : (load / sg->__cpu_power)
++ * Since cpu_power is a 'constant', we can use a reciprocal divide.
++ */
++static inline u32 sg_div_cpu_power(const struct sched_group *sg, u32 load)
++{
++	return reciprocal_divide(load, sg->reciprocal_cpu_power);
++}
++
++/*
++ * Each time a sched group cpu_power is changed,
++ * we must compute its reciprocal value
++ */
++static inline void sg_inc_cpu_power(struct sched_group *sg, u32 val)
++{
++	sg->__cpu_power += val;
++	sg->reciprocal_cpu_power = reciprocal_value(sg->__cpu_power);
++}
++#endif
++
++/*
++ * This is the time all tasks within the same priority round robin.
++ * Value is in ms and set to a minimum of 6ms. Scales with number of cpus.
++ * Tunable via /proc interface.
++ */
++int rr_interval __read_mostly = 6;
++
++/*
++ * sched_iso_cpu - sysctl which determines the cpu percentage SCHED_ISO tasks
++ * are allowed to run five seconds as real time tasks. This is the total over
++ * all online cpus.
++ */
++int sched_iso_cpu __read_mostly = 70;
++
++int prio_ratios[PRIO_RANGE] __read_mostly;
++
++static inline unsigned long timeslice(void)
++{
++	return MS_TO_US(rr_interval);
++}
++
++struct global_rq {
++	spinlock_t lock;
++	unsigned long nr_running;
++	unsigned long nr_uninterruptible;
++	unsigned long long nr_switches;
++	struct list_head queue[PRIO_LIMIT];
++	DECLARE_BITMAP(prio_bitmap, PRIO_LIMIT + 1);
++	unsigned long iso_ticks;
++	unsigned short iso_refractory;
++#ifdef CONFIG_SMP
++	unsigned long qnr; /* queued not running */
++	cpumask_t cpu_idle_map;
++#endif
++};
++
++static struct global_rq grq;
++
++/*
++ * This is the main, per-CPU runqueue data structure.
++ * All this is protected by the global_rq lock.
++ */
++struct rq {
++#ifdef CONFIG_SMP
++#ifdef CONFIG_NO_HZ
++	unsigned char in_nohz_recently;
++#endif
++#endif
++
++	struct task_struct *curr, *idle;
++	struct mm_struct *prev_mm;
++	struct list_head queue; /* Place to store currently running task */
++
++	/* Stored data about rq->curr to work outside grq lock */
++	unsigned long rq_deadline;
++	unsigned int rq_policy;
++	int rq_time_slice;
++	int rq_prio;
++
++	/* Accurate timekeeping data */
++	u64 timekeep_clock;
++	unsigned long user_pc, nice_pc, irq_pc, softirq_pc, system_pc,
++			iowait_pc, idle_pc;
++	atomic_t nr_iowait;
++
++	int cpu;		/* cpu of this runqueue */
++	int online;
++
++#ifdef CONFIG_SMP
++	struct root_domain *rd;
++	struct sched_domain *sd;
++
++	struct list_head migration_queue;
++#endif
++
++	u64 clock;
++#ifdef CONFIG_SCHEDSTATS
++
++	/* latency stats */
++	struct sched_info rq_sched_info;
++	unsigned long long rq_cpu_time;
++	/* could above be rq->cfs_rq.exec_clock + rq->rt_rq.rt_runtime ? */
++
++	/* sys_sched_yield() stats */
++	unsigned int yld_count;
++
++	/* schedule() stats */
++	unsigned int sched_switch;
++	unsigned int sched_count;
++	unsigned int sched_goidle;
++
++	/* try_to_wake_up() stats */
++	unsigned int ttwu_count;
++	unsigned int ttwu_local;
++
++	/* BKL stats */
++	unsigned int bkl_count;
++#endif
++};
++
++static DEFINE_PER_CPU(struct rq, runqueues) ____cacheline_aligned_in_smp;
++static DEFINE_MUTEX(sched_hotcpu_mutex);
++
++#ifdef CONFIG_SMP
++
++/*
++ * We add the notion of a root-domain which will be used to define per-domain
++ * variables. Each exclusive cpuset essentially defines an island domain by
++ * fully partitioning the member cpus from any other cpuset. Whenever a new
++ * exclusive cpuset is created, we also create and attach a new root-domain
++ * object.
++ *
++ */
++struct root_domain {
++	atomic_t refcount;
++	cpumask_var_t span;
++	cpumask_var_t online;
++
++	/*
++	 * The "RT overload" flag: it gets set if a CPU has more than
++	 * one runnable RT task.
++	 */
++	cpumask_var_t rto_mask;
++	atomic_t rto_count;
++#if defined(CONFIG_SCHED_MC) || defined(CONFIG_SCHED_SMT)
++	/*
++	 * Preferred wake up cpu nominated by sched_mc balance that will be
++	 * used when most cpus are idle in the system indicating overall very
++	 * low system utilisation. Triggered at POWERSAVINGS_BALANCE_WAKEUP(2)
++	 */
++	unsigned int sched_mc_preferred_wakeup_cpu;
++#endif
++};
++
++/*
++ * By default the system creates a single root-domain with all cpus as
++ * members (mimicking the global state we have today).
++ */
++static struct root_domain def_root_domain;
++
++#endif
++
++static inline int cpu_of(struct rq *rq)
++{
++#ifdef CONFIG_SMP
++	return rq->cpu;
++#else
++	return 0;
++#endif
++}
++
++/*
++ * The domain tree (rq->sd) is protected by RCU's quiescent state transition.
++ * See detach_destroy_domains: synchronize_sched for details.
++ *
++ * The domain tree of any CPU may only be accessed from within
++ * preempt-disabled sections.
++ */
++#define for_each_domain(cpu, __sd) \
++	for (__sd = rcu_dereference(cpu_rq(cpu)->sd); __sd; __sd = __sd->parent)
++
++#define cpu_rq(cpu)		(&per_cpu(runqueues, (cpu)))
++#define this_rq()		(&__get_cpu_var(runqueues))
++#define task_rq(p)		cpu_rq(task_cpu(p))
++#define cpu_curr(cpu)		(cpu_rq(cpu)->curr)
++
++#include "sched_stats.h"
++
++#ifndef prepare_arch_switch
++# define prepare_arch_switch(next)	do { } while (0)
++#endif
++#ifndef finish_arch_switch
++# define finish_arch_switch(prev)	do { } while (0)
++#endif
++
++inline void update_rq_clock(struct rq *rq)
++{
++	rq->clock = sched_clock_cpu(cpu_of(rq));
++}
++
++static inline int task_running(struct task_struct *p)
++{
++	return (!!p->oncpu);
++}
++
++static inline void grq_lock(void)
++	__acquires(grq.lock)
++{
++	smp_mb();
++	spin_lock(&grq.lock);
++}
++
++static inline void grq_unlock(void)
++	__releases(grq.lock)
++{
++	spin_unlock(&grq.lock);
++}
++
++static inline void grq_lock_irq(void)
++	__acquires(grq.lock)
++{
++	smp_mb();
++	spin_lock_irq(&grq.lock);
++}
++
++static inline void time_lock_grq(struct rq *rq)
++	__acquires(grq.lock)
++{
++	grq_lock();
++	update_rq_clock(rq);
++}
++
++static inline void grq_unlock_irq(void)
++	__releases(grq.lock)
++{
++	spin_unlock_irq(&grq.lock);
++}
++
++static inline void grq_lock_irqsave(unsigned long *flags)
++	__acquires(grq.lock)
++{
++	smp_mb();
++	spin_lock_irqsave(&grq.lock, *flags);
++}
++
++static inline void grq_unlock_irqrestore(unsigned long *flags)
++	__releases(grq.lock)
++{
++	spin_unlock_irqrestore(&grq.lock, *flags);
++}
++
++static inline struct rq
++*task_grq_lock(struct task_struct *p, unsigned long *flags)
++	__acquires(grq.lock)
++{
++	grq_lock_irqsave(flags);
++	return task_rq(p);
++}
++
++static inline struct rq
++*time_task_grq_lock(struct task_struct *p, unsigned long *flags)
++	__acquires(grq.lock)
++{
++	struct rq *rq = task_grq_lock(p, flags);
++	update_rq_clock(rq);
++	return rq;
++}
++
++static inline void task_grq_unlock(unsigned long *flags)
++	__releases(grq.lock)
++{
++	grq_unlock_irqrestore(flags);
++}
++
++/**
++ * runqueue_is_locked
++ *
++ * Returns true if the global runqueue is locked.
++ * This interface allows printk to be called with the runqueue lock
++ * held and know whether or not it is OK to wake up the klogd.
++ */
++int runqueue_is_locked(void)
++{
++	return spin_is_locked(&grq.lock);
++}
++
++void task_rq_unlock_wait(struct task_struct *p)
++	__releases(grq.lock)
++{
++	smp_mb(); /* spin-unlock-wait is not a full memory barrier */
++	spin_unlock_wait(&grq.lock);
++}
++
++static inline void time_grq_lock(struct rq *rq, unsigned long *flags)
++	__acquires(grq.lock)
++{
++	spin_lock_irqsave(&grq.lock, *flags);
++	update_rq_clock(rq);
++}
++
++static inline struct rq *__task_grq_lock(struct task_struct *p)
++	__acquires(grq.lock)
++{
++	grq_lock();
++	return task_rq(p);
++}
++
++static inline void __task_grq_unlock(void)
++	__releases(grq.lock)
++{
++	grq_unlock();
++}
++
++#ifndef __ARCH_WANT_UNLOCKED_CTXSW
++static inline void prepare_lock_switch(struct rq *rq, struct task_struct *next)
++{
++}
++
++static inline void finish_lock_switch(struct rq *rq, struct task_struct *prev)
++{
++#ifdef CONFIG_DEBUG_SPINLOCK
++	/* this is a valid case when another task releases the spinlock */
++	grq.lock.owner = current;
++#endif
++	/*
++	 * If we are tracking spinlock dependencies then we have to
++	 * fix up the runqueue lock - which gets 'carried over' from
++	 * prev into current:
++	 */
++	spin_acquire(&grq.lock.dep_map, 0, 0, _THIS_IP_);
++
++	grq_unlock_irq();
++}
++
++#else /* __ARCH_WANT_UNLOCKED_CTXSW */
++
++static inline void prepare_lock_switch(struct rq *rq, struct task_struct *next)
++{
++#ifdef __ARCH_WANT_INTERRUPTS_ON_CTXSW
++	grq_unlock_irq();
++#else
++	grq_unlock();
++#endif
++}
++
++static inline void finish_lock_switch(struct rq *rq, struct task_struct *prev)
++{
++	smp_wmb();
++#ifndef __ARCH_WANT_INTERRUPTS_ON_CTXSW
++	local_irq_enable();
++#endif
++}
++#endif /* __ARCH_WANT_UNLOCKED_CTXSW */
++
++/*
++ * A task that is queued will be on the grq run list.
++ * A task that is not running or queued will not be on the grq run list.
++ * A task that is currently running will have ->oncpu set and be queued
++ * temporarily in its own rq queue.
++ * A task that is running and no longer queued will be seen only on
++ * context switch exit.
++ */
++
++static inline int task_queued(struct task_struct *p)
++{
++	return (!list_empty(&p->rt.run_list));
++}
++
++static inline int task_queued_only(struct task_struct *p)
++{
++	return (!list_empty(&p->rt.run_list) && !task_running(p));
++}
++
++/*
++ * Removing from the global runqueue. Enter with grq locked.
++ */
++static void dequeue_task(struct task_struct *p)
++{
++	list_del_init(&p->rt.run_list);
++	if (list_empty(grq.queue + p->prio))
++		__clear_bit(p->prio, grq.prio_bitmap);
++}
++
++static inline void reset_first_time_slice(struct task_struct *p)
++{
++	if (unlikely(p->first_time_slice))
++		p->first_time_slice = 0;
++}
++
++static int idleprio_suitable(struct task_struct *p)
++{
++	return (!freezing(p) && !signal_pending(p) &&
++		!(task_contributes_to_load(p)) && !(p->flags & (PF_EXITING)));
++}
++
++static int isoprio_suitable(void)
++{
++	return !grq.iso_refractory;
++}
++
++/*
++ * Adding to the global runqueue. Enter with grq locked.
++ */
++static void enqueue_task(struct task_struct *p)
++{
++	if (!rt_task(p)) {
++		/* Check it hasn't gotten rt from PI */
++		if ((idleprio_task(p) && idleprio_suitable(p)) ||
++		   (iso_task(p) && isoprio_suitable()))
++			p->prio = p->normal_prio;
++		else
++			p->prio = NORMAL_PRIO;
++	}
++	__set_bit(p->prio, grq.prio_bitmap);
++	list_add_tail(&p->rt.run_list, grq.queue + p->prio);
++	sched_info_queued(p);
++}
++
++/* Only idle task does this as a real time task*/
++static inline void enqueue_task_head(struct task_struct *p)
++{
++	__set_bit(p->prio, grq.prio_bitmap);
++	list_add(&p->rt.run_list, grq.queue + p->prio);
++	sched_info_queued(p);
++}
++
++static inline void requeue_task(struct task_struct *p)
++{
++	sched_info_queued(p);
++}
++
++static inline int pratio(struct task_struct *p)
++{
++	return prio_ratios[TASK_USER_PRIO(p)];
++}
++
++/*
++ * task_timeslice - all tasks of all priorities get the exact same timeslice
++ * length. CPU distribution is handled by giving different deadlines to
++ * tasks of different priorities.
++ */
++static inline int task_timeslice(struct task_struct *p)
++{
++	return (rr_interval * pratio(p) / 100);
++}
++
++#ifdef CONFIG_SMP
++static inline void inc_qnr(void)
++{
++	grq.qnr++;
++}
++
++static inline void dec_qnr(void)
++{
++	grq.qnr--;
++}
++
++static inline int queued_notrunning(void)
++{
++	return grq.qnr;
++}
++#else
++static inline void inc_qnr(void)
++{
++}
++
++static inline void dec_qnr(void)
++{
++}
++
++static inline int queued_notrunning(void)
++{
++	return grq.nr_running;
++}
++#endif
++
++/*
++ * activate_idle_task - move idle task to the _front_ of runqueue.
++ */
++static inline void activate_idle_task(struct task_struct *p)
++{
++	enqueue_task_head(p);
++	grq.nr_running++;
++	inc_qnr();
++}
++
++static inline int normal_prio(struct task_struct *p)
++{
++	if (has_rt_policy(p))
++		return MAX_RT_PRIO - 1 - p->rt_priority;
++	if (idleprio_task(p))
++		return IDLE_PRIO;
++	if (iso_task(p))
++		return ISO_PRIO;
++	return NORMAL_PRIO;
++}
++
++/*
++ * Calculate the current priority, i.e. the priority
++ * taken into account by the scheduler. This value might
++ * be boosted by RT tasks as it will be RT if the task got
++ * RT-boosted. If not then it returns p->normal_prio.
++ */
++static int effective_prio(struct task_struct *p)
++{
++	p->normal_prio = normal_prio(p);
++	/*
++	 * If we are RT tasks or we were boosted to RT priority,
++	 * keep the priority unchanged. Otherwise, update priority
++	 * to the normal priority:
++	 */
++	if (!rt_prio(p->prio))
++		return p->normal_prio;
++	return p->prio;
++}
++
++/*
++ * activate_task - move a task to the runqueue. Enter with grq locked. The rq
++ * doesn't really matter but gives us the local clock.
++ */
++static void activate_task(struct task_struct *p, struct rq *rq)
++{
++	u64 now = rq->clock;
++
++	/*
++	 * Sleep time is in units of nanosecs, so shift by 20 to get a
++	 * milliseconds-range estimation of the amount of time that the task
++	 * spent sleeping:
++	 */
++	if (unlikely(prof_on == SLEEP_PROFILING)) {
++		if (p->state == TASK_UNINTERRUPTIBLE)
++			profile_hits(SLEEP_PROFILING, (void *)get_wchan(p),
++				     (now - p->timestamp) >> 20);
++	}
++
++	p->prio = effective_prio(p);
++	p->timestamp = now;
++	if (task_contributes_to_load(p))
++		grq.nr_uninterruptible--;
++	enqueue_task(p);
++	grq.nr_running++;
++	inc_qnr();
++}
++
++/*
++ * deactivate_task - If it's running, it's not on the grq and we can just
++ * decrement the nr_running.
++ */
++static inline void deactivate_task(struct task_struct *p)
++{
++	if (task_contributes_to_load(p))
++		grq.nr_uninterruptible++;
++	grq.nr_running--;
++}
++
++#ifdef CONFIG_SMP
++void set_task_cpu(struct task_struct *p, unsigned int cpu)
++{
++	trace_sched_migrate_task(p, cpu);
++	/*
++	 * After ->cpu is set up to a new value, task_grq_lock(p, ...) can be
++	 * successfuly executed on another CPU. We must ensure that updates of
++	 * per-task data have been completed by this moment.
++	 */
++	smp_wmb();
++	task_thread_info(p)->cpu = cpu;
++}
++#endif
++
++/*
++ * Move a task off the global queue and take it to a cpu for it will
++ * become the running task.
++ */
++static inline void take_task(struct rq *rq, struct task_struct *p)
++{
++	set_task_cpu(p, rq->cpu);
++	dequeue_task(p);
++	list_add(&p->rt.run_list, &rq->queue);
++	dec_qnr();
++}
++
++/*
++ * Returns a descheduling task to the grq runqueue unless it is being
++ * deactivated.
++ */
++static inline void return_task(struct task_struct *p, int deactivate)
++{
++	list_del_init(&p->rt.run_list);
++	if (deactivate)
++		deactivate_task(p);
++	else {
++		inc_qnr();
++		enqueue_task(p);
++	}
++}
++
++/*
++ * resched_task - mark a task 'to be rescheduled now'.
++ *
++ * On UP this means the setting of the need_resched flag, on SMP it
++ * might also involve a cross-CPU call to trigger the scheduler on
++ * the target CPU.
++ */
++#ifdef CONFIG_SMP
++
++#ifndef tsk_is_polling
++#define tsk_is_polling(t) test_tsk_thread_flag(t, TIF_POLLING_NRFLAG)
++#endif
++
++static void resched_task(struct task_struct *p)
++{
++	int cpu;
++
++	assert_spin_locked(&grq.lock);
++
++	if (unlikely(test_tsk_thread_flag(p, TIF_NEED_RESCHED)))
++		return;
++
++	set_tsk_thread_flag(p, TIF_NEED_RESCHED);
++
++	cpu = task_cpu(p);
++	if (cpu == smp_processor_id())
++		return;
++
++	/* NEED_RESCHED must be visible before we test polling */
++	smp_mb();
++	if (!tsk_is_polling(p))
++		smp_send_reschedule(cpu);
++}
++
++#else
++static inline void resched_task(struct task_struct *p)
++{
++	assert_spin_locked(&grq.lock);
++	set_tsk_need_resched(p);
++}
++#endif
++
++/**
++ * task_curr - is this task currently executing on a CPU?
++ * @p: the task in question.
++ */
++inline int task_curr(const struct task_struct *p)
++{
++	return cpu_curr(task_cpu(p)) == p;
++}
++
++#ifdef CONFIG_SMP
++struct migration_req {
++	struct list_head list;
++
++	struct task_struct *task;
++	int dest_cpu;
++
++	struct completion done;
++};
++
++/*
++ * wait_task_context_switch -	wait for a thread to complete at least one
++ *				context switch.
++ *
++ * @p must not be current.
++ */
++void wait_task_context_switch(struct task_struct *p)
++{
++	unsigned long nvcsw, nivcsw, flags;
++	int running;
++	struct rq *rq;
++
++	nvcsw	= p->nvcsw;
++	nivcsw	= p->nivcsw;
++	for (;;) {
++		/*
++		 * The runqueue is assigned before the actual context
++		 * switch. We need to take the runqueue lock.
++		 *
++		 * We could check initially without the lock but it is
++		 * very likely that we need to take the lock in every
++		 * iteration.
++		 */
++		rq = task_grq_lock(p, &flags);
++		running = task_running(p);
++		task_grq_unlock(&flags);
++
++		if (likely(!running))
++			break;
++		/*
++		 * The switch count is incremented before the actual
++		 * context switch. We thus wait for two switches to be
++		 * sure at least one completed.
++		 */
++		if ((p->nvcsw - nvcsw) > 1)
++			break;
++		if ((p->nivcsw - nivcsw) > 1)
++			break;
++
++		cpu_relax();
++	}
++}
++
++/*
++ * wait_task_inactive - wait for a thread to unschedule.
++ *
++ * If @match_state is nonzero, it's the @p->state value just checked and
++ * not expected to change.  If it changes, i.e. @p might have woken up,
++ * then return zero.  When we succeed in waiting for @p to be off its CPU,
++ * we return a positive number (its total switch count).  If a second call
++ * a short while later returns the same number, the caller can be sure that
++ * @p has remained unscheduled the whole time.
++ *
++ * The caller must ensure that the task *will* unschedule sometime soon,
++ * else this function might spin for a *long* time. This function can't
++ * be called with interrupts off, or it may introduce deadlock with
++ * smp_call_function() if an IPI is sent by the same process we are
++ * waiting to become inactive.
++ */
++unsigned long wait_task_inactive(struct task_struct *p, long match_state)
++{
++	unsigned long flags;
++	int running, on_rq;
++	unsigned long ncsw;
++	struct rq *rq;
++
++	for (;;) {
++		/*
++		 * We do the initial early heuristics without holding
++		 * any task-queue locks at all. We'll only try to get
++		 * the runqueue lock when things look like they will
++		 * work out!
++		 */
++		rq = task_rq(p);
++
++		/*
++		 * If the task is actively running on another CPU
++		 * still, just relax and busy-wait without holding
++		 * any locks.
++		 *
++		 * NOTE! Since we don't hold any locks, it's not
++		 * even sure that "rq" stays as the right runqueue!
++		 * But we don't care, since this will
++		 * return false if the runqueue has changed and p
++		 * is actually now running somewhere else!
++		 */
++		while (task_running(p) && p == rq->curr) {
++			if (match_state && unlikely(p->state != match_state))
++				return 0;
++			cpu_relax();
++		}
++
++		/*
++		 * Ok, time to look more closely! We need the grq
++		 * lock now, to be *sure*. If we're wrong, we'll
++		 * just go back and repeat.
++		 */
++		rq = task_grq_lock(p, &flags);
++		trace_sched_wait_task(rq, p);
++		running = task_running(p);
++		on_rq = task_queued(p);
++		ncsw = 0;
++		if (!match_state || p->state == match_state)
++			ncsw = p->nvcsw | LONG_MIN; /* sets MSB */
++		task_grq_unlock(&flags);
++
++		/*
++		 * If it changed from the expected state, bail out now.
++		 */
++		if (unlikely(!ncsw))
++			break;
++
++		/*
++		 * Was it really running after all now that we
++		 * checked with the proper locks actually held?
++		 *
++		 * Oops. Go back and try again..
++		 */
++		if (unlikely(running)) {
++			cpu_relax();
++			continue;
++		}
++
++		/*
++		 * It's not enough that it's not actively running,
++		 * it must be off the runqueue _entirely_, and not
++		 * preempted!
++		 *
++		 * So if it was still runnable (but just not actively
++		 * running right now), it's preempted, and we should
++		 * yield - it could be a while.
++		 */
++		if (unlikely(on_rq)) {
++			schedule_timeout_uninterruptible(1);
++			continue;
++		}
++
++		/*
++		 * Ahh, all good. It wasn't running, and it wasn't
++		 * runnable, which means that it will never become
++		 * running in the future either. We're all done!
++		 */
++		break;
++	}
++
++	return ncsw;
++}
++
++/***
++ * kick_process - kick a running thread to enter/exit the kernel
++ * @p: the to-be-kicked thread
++ *
++ * Cause a process which is running on another CPU to enter
++ * kernel-mode, without any delay. (to get signals handled.)
++ *
++ * NOTE: this function doesnt have to take the runqueue lock,
++ * because all it wants to ensure is that the remote task enters
++ * the kernel. If the IPI races and the task has been migrated
++ * to another CPU then no harm is done and the purpose has been
++ * achieved as well.
++ */
++void kick_process(struct task_struct *p)
++{
++	int cpu;
++
++	preempt_disable();
++	cpu = task_cpu(p);
++	if ((cpu != smp_processor_id()) && task_curr(p))
++		smp_send_reschedule(cpu);
++	preempt_enable();
++}
++EXPORT_SYMBOL_GPL(kick_process);
++#endif
++
++#define rq_idle(rq)	((rq)->rq_prio == PRIO_LIMIT)
++
++/*
++ * RT tasks preempt purely on priority. SCHED_NORMAL tasks preempt on the
++ * basis of earlier deadlines. SCHED_BATCH and SCHED_IDLE don't preempt,
++ * they cooperatively multitask.
++ */
++static inline int task_preempts_curr(struct task_struct *p, struct rq *rq)
++{
++	int preempts = 0;
++
++	if (p->prio < rq->rq_prio)
++		preempts = 1;
++	else if (p->policy == SCHED_NORMAL && (p->prio == rq->rq_prio &&
++		 time_before(p->deadline, rq->rq_deadline)))
++			preempts = 1;
++	return preempts;
++}
++
++/*
++ * Wake up *any* suitable cpu to schedule this task.
++ */
++static void try_preempt(struct task_struct *p)
++{
++	struct rq *highest_prio_rq, *this_rq;
++	unsigned long latest_deadline, cpu;
++	int highest_prio;
++	cpumask_t tmp;
++
++	/* Try the task's previous rq first and as a fallback */
++	this_rq = task_rq(p);
++
++	if (cpu_isset(this_rq->cpu, p->cpus_allowed)) {
++		highest_prio_rq = this_rq;
++		/* If this_rq is idle, use that. */
++		if (rq_idle(this_rq))
++			goto found_rq;
++	} else
++		highest_prio_rq = cpu_rq(any_online_cpu(p->cpus_allowed));
++	latest_deadline = this_rq->rq_deadline;
++	highest_prio = this_rq->rq_prio;
++
++	cpus_and(tmp, cpu_online_map, p->cpus_allowed);
++
++	for_each_cpu_mask(cpu, tmp) {
++		struct rq *rq;
++		int rq_prio;
++
++		rq = cpu_rq(cpu);
++
++		if (rq_idle(rq)) {
++			/* found an idle rq, use that one */
++			highest_prio_rq = rq;
++			goto found_rq;
++		}
++
++		rq_prio = rq->rq_prio;
++		if (rq_prio > highest_prio ||
++			(rq_prio == highest_prio &&
++			time_after(rq->rq_deadline, latest_deadline))) {
++				highest_prio = rq_prio;
++				latest_deadline = rq->rq_deadline;
++				highest_prio_rq = rq;
++		}
++	}
++
++	if (!task_preempts_curr(p, highest_prio_rq))
++		return;
++found_rq:
++	resched_task(highest_prio_rq->curr);
++	return;
++}
++
++/**
++ * task_oncpu_function_call - call a function on the cpu on which a task runs
++ * @p:		the task to evaluate
++ * @func:	the function to be called
++ * @info:	the function call argument
++ *
++ * Calls the function @func when the task is currently running. This might
++ * be on the current CPU, which just calls the function directly
++ */
++void task_oncpu_function_call(struct task_struct *p,
++			      void (*func) (void *info), void *info)
++{
++	int cpu;
++
++	preempt_disable();
++	cpu = task_cpu(p);
++	if (task_curr(p))
++		smp_call_function_single(cpu, func, info, 1);
++	preempt_enable();
++}
++
++#ifdef CONFIG_SMP
++static int suitable_idle_cpus(struct task_struct *p)
++{
++	return (cpus_intersects(p->cpus_allowed, grq.cpu_idle_map));
++}
++#else
++static int suitable_idle_cpus(struct task_struct *p)
++{
++	return 0;
++}
++#endif
++
++/***
++ * try_to_wake_up - wake up a thread
++ * @p: the to-be-woken-up thread
++ * @state: the mask of task states that can be woken
++ * @sync: do a synchronous wakeup?
++ *
++ * Put it on the run-queue if it's not already there. The "current"
++ * thread is always on the run-queue (except when the actual
++ * re-schedule is in progress), and as such you're allowed to do
++ * the simpler "current->state = TASK_RUNNING" to mark yourself
++ * runnable without the overhead of this.
++ *
++ * returns failure only if the task is already active.
++ */
++static int try_to_wake_up(struct task_struct *p, unsigned int state, int sync)
++{
++	unsigned long flags;
++	int success = 0;
++	long old_state;
++	struct rq *rq;
++
++	rq = time_task_grq_lock(p, &flags);
++	old_state = p->state;
++	if (!(old_state & state))
++		goto out_unlock;
++
++	/*
++	 * Note this catches tasks that are running and queued, but returns
++	 * false during the context switch when they're running and no
++	 * longer queued.
++	 */
++	if (task_queued(p))
++		goto out_running;
++
++	activate_task(p, rq);
++	/*
++	 * Sync wakeups (i.e. those types of wakeups where the waker
++	 * has indicated that it will leave the CPU in short order)
++	 * don't trigger a preemption if there are no idle cpus,
++	 * instead waiting for current to deschedule.
++	 */
++	if (!sync || (sync && suitable_idle_cpus(p)))
++		try_preempt(p);
++	success = 1;
++
++out_running:
++	trace_sched_wakeup(rq, p, success);
++	p->state = TASK_RUNNING;
++out_unlock:
++	task_grq_unlock(&flags);
++	return success;
++}
++
++/**
++ * wake_up_process - Wake up a specific process
++ * @p: The process to be woken up.
++ *
++ * Attempt to wake up the nominated process and move it to the set of runnable
++ * processes.  Returns 1 if the process was woken up, 0 if it was already
++ * running.
++ *
++ * It may be assumed that this function implies a write memory barrier before
++ * changing the task state if and only if any tasks are woken up.
++ */
++int wake_up_process(struct task_struct *p)
++{
++	return try_to_wake_up(p, TASK_ALL, 0);
++}
++EXPORT_SYMBOL(wake_up_process);
++
++int wake_up_state(struct task_struct *p, unsigned int state)
++{
++	return try_to_wake_up(p, state, 0);
++}
++
++/*
++ * Perform scheduler related setup for a newly forked process p.
++ * p is forked by current.
++ */
++void sched_fork(struct task_struct *p, int clone_flags)
++{
++	int cpu = get_cpu();
++	struct rq *rq;
++
++#ifdef CONFIG_PREEMPT_NOTIFIERS
++	INIT_HLIST_HEAD(&p->preempt_notifiers);
++#endif
++	/*
++	 * We mark the process as running here, but have not actually
++	 * inserted it onto the runqueue yet. This guarantees that
++	 * nobody will actually run it, and a signal or other external
++	 * event cannot wake it up and insert it on the runqueue either.
++	 */
++	p->state = TASK_RUNNING;
++	set_task_cpu(p, cpu);
++
++	/* Should be reset in fork.c but done here for ease of bfs patching */
++	p->se.sum_exec_runtime = p->stime_pc = p->utime_pc = 0;
++
++	/*
++	 * Make sure we do not leak PI boosting priority to the child:
++	 */
++	p->prio = current->normal_prio;
++
++	INIT_LIST_HEAD(&p->rt.run_list);
++#if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
++	if (unlikely(sched_info_on()))
++		memset(&p->sched_info, 0, sizeof(p->sched_info));
++#endif
++
++	p->oncpu = 0;
++
++#ifdef CONFIG_PREEMPT
++	/* Want to start with kernel preemption disabled. */
++	task_thread_info(p)->preempt_count = 1;
++#endif
++	if (unlikely(p->policy == SCHED_FIFO))
++		goto out;
++	/*
++	 * Share the timeslice between parent and child, thus the
++	 * total amount of pending timeslices in the system doesn't change,
++	 * resulting in more scheduling fairness. If it's negative, it won't
++	 * matter since that's the same as being 0. current's time_slice is
++	 * actually in rq_time_slice when it's running.
++	 */
++	local_irq_disable();
++	rq = task_rq(current);
++	if (likely(rq->rq_time_slice > 0)) {
++		rq->rq_time_slice /= 2;
++		/*
++		 * The remainder of the first timeslice might be recovered by
++		 * the parent if the child exits early enough.
++		 */
++		p->first_time_slice = 1;
++	}
++	p->rt.time_slice = rq->rq_time_slice;
++	local_irq_enable();
++out:
++	put_cpu();
++}
++
++/*
++ * wake_up_new_task - wake up a newly created task for the first time.
++ *
++ * This function will do some initial scheduler statistics housekeeping
++ * that must be done for every newly created context, then puts the task
++ * on the runqueue and wakes it.
++ */
++void wake_up_new_task(struct task_struct *p, unsigned long clone_flags)
++{
++	struct task_struct *parent;
++	unsigned long flags;
++	struct rq *rq;
++
++	rq = time_task_grq_lock(p, &flags); ;
++	parent = p->parent;
++	BUG_ON(p->state != TASK_RUNNING);
++	set_task_cpu(p, task_cpu(parent));
++
++	activate_task(p, rq);
++	trace_sched_wakeup_new(rq, p, 1);
++	if (!(clone_flags & CLONE_VM) && rq->curr == parent &&
++		!suitable_idle_cpus(p)) {
++		/*
++		 * The VM isn't cloned, so we're in a good position to
++		 * do child-runs-first in anticipation of an exec. This
++		 * usually avoids a lot of COW overhead.
++		 */
++			resched_task(parent);
++	} else
++		try_preempt(p);
++	task_grq_unlock(&flags);
++}
++
++/*
++ * Potentially available exiting-child timeslices are
++ * retrieved here - this way the parent does not get
++ * penalized for creating too many threads.
++ *
++ * (this cannot be used to 'generate' timeslices
++ * artificially, because any timeslice recovered here
++ * was given away by the parent in the first place.)
++ */
++void sched_exit(struct task_struct *p)
++{
++	struct task_struct *parent;
++	unsigned long flags;
++	struct rq *rq;
++
++	if (p->first_time_slice) {
++		parent = p->parent;
++		rq = task_grq_lock(parent, &flags);
++		parent->rt.time_slice += p->rt.time_slice;
++		if (unlikely(parent->rt.time_slice > timeslice()))
++			parent->rt.time_slice = timeslice();
++		task_grq_unlock(&flags);
++	}
++}
++
++#ifdef CONFIG_PREEMPT_NOTIFIERS
++
++/**
++ * preempt_notifier_register - tell me when current is being preempted & rescheduled
++ * @notifier: notifier struct to register
++ */
++void preempt_notifier_register(struct preempt_notifier *notifier)
++{
++	hlist_add_head(&notifier->link, &current->preempt_notifiers);
++}
++EXPORT_SYMBOL_GPL(preempt_notifier_register);
++
++/**
++ * preempt_notifier_unregister - no longer interested in preemption notifications
++ * @notifier: notifier struct to unregister
++ *
++ * This is safe to call from within a preemption notifier.
++ */
++void preempt_notifier_unregister(struct preempt_notifier *notifier)
++{
++	hlist_del(&notifier->link);
++}
++EXPORT_SYMBOL_GPL(preempt_notifier_unregister);
++
++static void fire_sched_in_preempt_notifiers(struct task_struct *curr)
++{
++	struct preempt_notifier *notifier;
++	struct hlist_node *node;
++
++	hlist_for_each_entry(notifier, node, &curr->preempt_notifiers, link)
++		notifier->ops->sched_in(notifier, raw_smp_processor_id());
++}
++
++static void
++fire_sched_out_preempt_notifiers(struct task_struct *curr,
++				 struct task_struct *next)
++{
++	struct preempt_notifier *notifier;
++	struct hlist_node *node;
++
++	hlist_for_each_entry(notifier, node, &curr->preempt_notifiers, link)
++		notifier->ops->sched_out(notifier, next);
++}
++
++#else /* !CONFIG_PREEMPT_NOTIFIERS */
++
++static void fire_sched_in_preempt_notifiers(struct task_struct *curr)
++{
++}
++
++static void
++fire_sched_out_preempt_notifiers(struct task_struct *curr,
++				 struct task_struct *next)
++{
++}
++
++#endif /* CONFIG_PREEMPT_NOTIFIERS */
++
++/**
++ * prepare_task_switch - prepare to switch tasks
++ * @rq: the runqueue preparing to switch
++ * @next: the task we are going to switch to.
++ *
++ * This is called with the rq lock held and interrupts off. It must
++ * be paired with a subsequent finish_task_switch after the context
++ * switch.
++ *
++ * prepare_task_switch sets up locking and calls architecture specific
++ * hooks.
++ */
++static inline void
++prepare_task_switch(struct rq *rq, struct task_struct *prev,
++		    struct task_struct *next)
++{
++	fire_sched_out_preempt_notifiers(prev, next);
++	prepare_lock_switch(rq, next);
++	prepare_arch_switch(next);
++}
++
++/**
++ * finish_task_switch - clean up after a task-switch
++ * @rq: runqueue associated with task-switch
++ * @prev: the thread we just switched away from.
++ *
++ * finish_task_switch must be called after the context switch, paired
++ * with a prepare_task_switch call before the context switch.
++ * finish_task_switch will reconcile locking set up by prepare_task_switch,
++ * and do any other architecture-specific cleanup actions.
++ *
++ * Note that we may have delayed dropping an mm in context_switch(). If
++ * so, we finish that here outside of the runqueue lock.  (Doing it
++ * with the lock held can cause deadlocks; see schedule() for
++ * details.)
++ */
++static inline void finish_task_switch(struct rq *rq, struct task_struct *prev)
++	__releases(grq.lock)
++{
++	struct mm_struct *mm = rq->prev_mm;
++	long prev_state;
++
++	rq->prev_mm = NULL;
++
++	/*
++	 * A task struct has one reference for the use as "current".
++	 * If a task dies, then it sets TASK_DEAD in tsk->state and calls
++	 * schedule one last time. The schedule call will never return, and
++	 * the scheduled task must drop that reference.
++	 * The test for TASK_DEAD must occur while the runqueue locks are
++	 * still held, otherwise prev could be scheduled on another cpu, die
++	 * there before we look at prev->state, and then the reference would
++	 * be dropped twice.
++	 *		Manfred Spraul <manfred@colorfullife.com>
++	 */
++	prev_state = prev->state;
++	finish_arch_switch(prev);
++	perf_counter_task_sched_in(current, cpu_of(rq));
++	finish_lock_switch(rq, prev);
++
++	fire_sched_in_preempt_notifiers(current);
++	if (mm)
++		mmdrop(mm);
++	if (unlikely(prev_state == TASK_DEAD)) {
++		/*
++		 * Remove function-return probe instances associated with this
++		 * task and put them back on the free list.
++	 	 */
++		kprobe_flush_task(prev);
++		put_task_struct(prev);
++	}
++}
++
++/**
++ * schedule_tail - first thing a freshly forked thread must call.
++ * @prev: the thread we just switched away from.
++ */
++asmlinkage void schedule_tail(struct task_struct *prev)
++	__releases(grq.lock)
++{
++	struct rq *rq = this_rq();
++
++	finish_task_switch(rq, prev);
++#ifdef __ARCH_WANT_UNLOCKED_CTXSW
++	/* In this case, finish_task_switch does not reenable preemption */
++	preempt_enable();
++#endif
++	if (current->set_child_tid)
++		put_user(current->pid, current->set_child_tid);
++}
++
++/*
++ * context_switch - switch to the new MM and the new
++ * thread's register state.
++ */
++static inline void
++context_switch(struct rq *rq, struct task_struct *prev,
++	       struct task_struct *next)
++{
++	struct mm_struct *mm, *oldmm;
++
++	prepare_task_switch(rq, prev, next);
++	trace_sched_switch(rq, prev, next);
++	mm = next->mm;
++	oldmm = prev->active_mm;
++	/*
++	 * For paravirt, this is coupled with an exit in switch_to to
++	 * combine the page table reload and the switch backend into
++	 * one hypercall.
++	 */
++	arch_enter_lazy_cpu_mode();
++
++	if (unlikely(!mm)) {
++		next->active_mm = oldmm;
++		atomic_inc(&oldmm->mm_count);
++		enter_lazy_tlb(oldmm, next);
++	} else
++		switch_mm(oldmm, mm, next);
++
++	if (unlikely(!prev->mm)) {
++		prev->active_mm = NULL;
++		rq->prev_mm = oldmm;
++	}
++	/*
++	 * Since the runqueue lock will be released by the next
++	 * task (which is an invalid locking op but in the case
++	 * of the scheduler it's an obvious special-case), so we
++	 * do an early lockdep release here:
++	 */
++#ifndef __ARCH_WANT_UNLOCKED_CTXSW
++	spin_release(&grq.lock.dep_map, 1, _THIS_IP_);
++#endif
++
++	/* Here we just switch the register state and the stack. */
++	switch_to(prev, next, prev);
++
++	barrier();
++	/*
++	 * this_rq must be evaluated again because prev may have moved
++	 * CPUs since it called schedule(), thus the 'rq' on its stack
++	 * frame will be invalid.
++	 */
++	finish_task_switch(this_rq(), prev);
++}
++
++/*
++ * nr_running, nr_uninterruptible and nr_context_switches:
++ *
++ * externally visible scheduler statistics: current number of runnable
++ * threads, current number of uninterruptible-sleeping threads, total
++ * number of context switches performed since bootup. All are measured
++ * without grabbing the grq lock but the occasional inaccurate result
++ * doesn't matter so long as it's positive.
++ */
++unsigned long nr_running(void)
++{
++	long nr = grq.nr_running;
++
++	if (unlikely(nr < 0))
++		nr = 0;
++	return (unsigned long)nr;
++}
++
++unsigned long nr_uninterruptible(void)
++{
++	unsigned long nu = grq.nr_uninterruptible;
++
++	if (unlikely(nu < 0))
++		nu = 0;
++	return nu;
++}
++
++unsigned long long nr_context_switches(void)
++{
++	long long ns = grq.nr_switches;
++
++	/* This is of course impossible */
++	if (unlikely(ns < 0))
++		ns = 1;
++	return (long long)ns;
++}
++
++unsigned long nr_iowait(void)
++{
++	unsigned long i, sum = 0;
++
++	for_each_possible_cpu(i)
++		sum += atomic_read(&cpu_rq(i)->nr_iowait);
++
++	return sum;
++}
++
++unsigned long nr_active(void)
++{
++	return nr_running() + nr_uninterruptible();
++}
++
++DEFINE_PER_CPU(struct kernel_stat, kstat);
++
++EXPORT_PER_CPU_SYMBOL(kstat);
++
++/*
++ * On each tick, see what percentage of that tick was attributed to each
++ * component and add the percentage to the _pc values. Once a _pc value has
++ * accumulated one tick's worth, account for that. This means the total
++ * percentage of load components will always be 100 per tick.
++ */
++static void pc_idle_time(struct rq *rq, unsigned long pc)
++{
++	struct cpu_usage_stat *cpustat = &kstat_this_cpu.cpustat;
++	cputime64_t tmp = cputime_to_cputime64(jiffies_to_cputime(1));
++
++	if (atomic_read(&rq->nr_iowait) > 0) {
++		rq->iowait_pc += pc;
++		if (rq->iowait_pc >= 100) {
++			rq->iowait_pc %= 100;
++			cpustat->iowait = cputime64_add(cpustat->iowait, tmp);
++		}
++	} else {
++		rq->idle_pc += pc;
++		if (rq->idle_pc >= 100) {
++			rq->idle_pc %= 100;
++			cpustat->idle = cputime64_add(cpustat->idle, tmp);
++		}
++	}
++}
++
++static void
++pc_system_time(struct rq *rq, struct task_struct *p, int hardirq_offset,
++	       unsigned long pc, unsigned long ns)
++{
++	struct cpu_usage_stat *cpustat = &kstat_this_cpu.cpustat;
++	cputime_t one_jiffy = jiffies_to_cputime(1);
++	cputime_t one_jiffy_scaled = cputime_to_scaled(one_jiffy);
++	cputime64_t tmp = cputime_to_cputime64(one_jiffy);
++
++	p->stime_pc += pc;
++	if (p->stime_pc >= 100) {
++		p->stime_pc -= 100;
++		p->stime = cputime_add(p->stime, one_jiffy);
++		p->stimescaled = cputime_add(p->stimescaled, one_jiffy_scaled);
++		account_group_system_time(p, one_jiffy);
++		acct_update_integrals(p);
++	}
++	p->se.sum_exec_runtime += ns;
++
++	if (hardirq_count() - hardirq_offset)
++		rq->irq_pc += pc;
++	else if (softirq_count()) {
++		rq->softirq_pc += pc;
++		if (rq->softirq_pc >= 100) {
++			rq->softirq_pc %= 100;
++			cpustat->softirq = cputime64_add(cpustat->softirq, tmp);
++		}
++	} else {
++		rq->system_pc += pc;
++		if (rq->system_pc >= 100) {
++			rq->system_pc %= 100;
++			cpustat->system = cputime64_add(cpustat->system, tmp);
++		}
++	}
++}
++
++static void pc_user_time(struct rq *rq, struct task_struct *p,
++			 unsigned long pc, unsigned long ns)
++{
++	struct cpu_usage_stat *cpustat = &kstat_this_cpu.cpustat;
++	cputime_t one_jiffy = jiffies_to_cputime(1);
++	cputime_t one_jiffy_scaled = cputime_to_scaled(one_jiffy);
++	cputime64_t tmp = cputime_to_cputime64(one_jiffy);
++
++	p->utime_pc += pc;
++	if (p->utime_pc >= 100) {
++		p->utime_pc -= 100;
++		p->utime = cputime_add(p->utime, one_jiffy);
++		p->utimescaled = cputime_add(p->utimescaled, one_jiffy_scaled);
++		account_group_user_time(p, one_jiffy);
++		acct_update_integrals(p);
++	}
++	p->se.sum_exec_runtime += ns;
++
++	if (TASK_NICE(p) > 0 || idleprio_task(p)) {
++		rq->nice_pc += pc;
++		if (rq->nice_pc >= 100) {
++			rq->nice_pc %= 100;
++			cpustat->nice = cputime64_add(cpustat->nice, tmp);
++		}
++	} else {
++		rq->user_pc += pc;
++		if (rq->user_pc >= 100) {
++			rq->user_pc %= 100;
++			cpustat->user = cputime64_add(cpustat->user, tmp);
++		}
++	}
++}
++
++/* Convert nanoseconds to percentage of one tick. */
++#define NS_TO_PC(NS)	(NS * 100 / JIFFIES_TO_NS(1))
++
++/*
++ * This is called on clock ticks and on context switches.
++ * Bank in p->se.sum_exec_runtime the ns elapsed since the last tick or switch.
++ * CPU scheduler quota accounting is also performed here in microseconds.
++ * The value returned from sched_clock() occasionally gives bogus values so
++ * some sanity checking is required. Time is supposed to be banked all the
++ * time so default to half a tick to make up for when sched_clock reverts
++ * to just returning jiffies, and for hardware that can't do tsc.
++ */
++static void
++update_cpu_clock(struct rq *rq, struct task_struct *p, int tick)
++{
++	long time_diff = rq->clock - p->last_ran;
++	long account_ns = rq->clock - rq->timekeep_clock;
++	struct task_struct *idle = rq->idle;
++	unsigned long account_pc;
++
++	/*
++	 * There should be less than or equal to one jiffy worth, and not
++	 * negative/overflow. time_diff is only used for internal scheduler
++	 * time_slice accounting.
++	 */
++	if (time_diff <= 0)
++		time_diff = JIFFIES_TO_NS(1) / 2;
++	else if (time_diff > JIFFIES_TO_NS(1))
++		time_diff = JIFFIES_TO_NS(1);
++
++	if (unlikely(account_ns < 0))
++		account_ns = 0;
++
++	account_pc = NS_TO_PC(account_ns);
++
++	if (tick) {
++		int user_tick = user_mode(get_irq_regs());
++
++		/* Accurate tick timekeeping */
++		if (user_tick)
++			pc_user_time(rq, p, account_pc, account_ns);
++		else if (p != idle || (irq_count() != HARDIRQ_OFFSET))
++			pc_system_time(rq, p, HARDIRQ_OFFSET,
++				       account_pc, account_ns);
++		else
++			pc_idle_time(rq, account_pc);
++	} else {
++		/* Accurate subtick timekeeping */
++		if (p == idle)
++			pc_idle_time(rq, account_pc);
++		else
++			pc_user_time(rq, p, account_pc, account_ns);
++	}
++
++	/* time_slice accounting is done in usecs to avoid overflow on 32bit */
++	if (rq->rq_policy != SCHED_FIFO && p != idle)
++		rq->rq_time_slice -= time_diff / 1000;
++	p->last_ran = rq->timekeep_clock = rq->clock;
++}
++
++/*
++ * Return any ns on the sched_clock that have not yet been accounted in
++ * @p in case that task is currently running.
++ *
++ * Called with task_grq_lock() held on @rq.
++ */
++static u64 do_task_delta_exec(struct task_struct *p, struct rq *rq)
++{
++	u64 ns = 0;
++
++	if (p == rq->curr) {
++		update_rq_clock(rq);
++		ns = rq->clock - p->last_ran;
++		if ((s64)ns < 0)
++			ns = 0;
++	}
++
++	return ns;
++}
++
++unsigned long long task_delta_exec(struct task_struct *p)
++{
++	unsigned long flags;
++	struct rq *rq;
++	u64 ns = 0;
++
++	rq = task_grq_lock(p, &flags);
++	ns = do_task_delta_exec(p, rq);
++	task_grq_unlock(&flags);
++
++	return ns;
++}
++
++/*
++ * Return accounted runtime for the task.
++ * In case the task is currently running, return the runtime plus current's
++ * pending runtime that have not been accounted yet.
++ */
++unsigned long long task_sched_runtime(struct task_struct *p)
++{
++	unsigned long flags;
++	struct rq *rq;
++	u64 ns = 0;
++
++	rq = task_grq_lock(p, &flags);
++	ns = p->se.sum_exec_runtime + do_task_delta_exec(p, rq);
++	task_grq_unlock(&flags);
++
++	return ns;
++}
++
++/*
++ * Return sum_exec_runtime for the thread group.
++ * In case the task is currently running, return the sum plus current's
++ * pending runtime that have not been accounted yet.
++ *
++ * Note that the thread group might have other running tasks as well,
++ * so the return value not includes other pending runtime that other
++ * running tasks might have.
++ */
++unsigned long long thread_group_sched_runtime(struct task_struct *p)
++{
++	struct task_cputime totals;
++	unsigned long flags;
++	struct rq *rq;
++	u64 ns;
++
++	rq = task_grq_lock(p, &flags);
++	thread_group_cputime(p, &totals);
++	ns = totals.sum_exec_runtime + do_task_delta_exec(p, rq);
++	task_grq_unlock(&flags);
++
++	return ns;
++}
++
++/* Compatibility crap for removal */
++void account_user_time(struct task_struct *p, cputime_t cputime,
++		       cputime_t cputime_scaled)
++{
++}
++
++void account_idle_time(cputime_t cputime)
++{
++}
++
++/*
++ * Account guest cpu time to a process.
++ * @p: the process that the cpu time gets accounted to
++ * @cputime: the cpu time spent in virtual machine since the last update
++ * @cputime_scaled: cputime scaled by cpu frequency
++ */
++static void account_guest_time(struct task_struct *p, cputime_t cputime,
++			       cputime_t cputime_scaled)
++{
++	cputime64_t tmp;
++	struct cpu_usage_stat *cpustat = &kstat_this_cpu.cpustat;
++
++	tmp = cputime_to_cputime64(cputime);
++
++	/* Add guest time to process. */
++	p->utime = cputime_add(p->utime, cputime);
++	p->utimescaled = cputime_add(p->utimescaled, cputime_scaled);
++	account_group_user_time(p, cputime);
++	p->gtime = cputime_add(p->gtime, cputime);
++
++	/* Add guest time to cpustat. */
++	cpustat->user = cputime64_add(cpustat->user, tmp);
++	cpustat->guest = cputime64_add(cpustat->guest, tmp);
++}
++
++/*
++ * Account system cpu time to a process.
++ * @p: the process that the cpu time gets accounted to
++ * @hardirq_offset: the offset to subtract from hardirq_count()
++ * @cputime: the cpu time spent in kernel space since the last update
++ * @cputime_scaled: cputime scaled by cpu frequency
++ * This is for guest only now.
++ */
++void account_system_time(struct task_struct *p, int hardirq_offset,
++			 cputime_t cputime, cputime_t cputime_scaled)
++{
++
++	if ((p->flags & PF_VCPU) && (irq_count() - hardirq_offset == 0))
++		account_guest_time(p, cputime, cputime_scaled);
++}
++
++/*
++ * Account for involuntary wait time.
++ * @steal: the cpu time spent in involuntary wait
++ */
++void account_steal_time(cputime_t cputime)
++{
++	struct cpu_usage_stat *cpustat = &kstat_this_cpu.cpustat;
++	cputime64_t cputime64 = cputime_to_cputime64(cputime);
++
++	cpustat->steal = cputime64_add(cpustat->steal, cputime64);
++}
++
++/*
++ * Account for idle time.
++ * @cputime: the cpu time spent in idle wait
++ */
++static void account_idle_times(cputime_t cputime)
++{
++	struct cpu_usage_stat *cpustat = &kstat_this_cpu.cpustat;
++	cputime64_t cputime64 = cputime_to_cputime64(cputime);
++	struct rq *rq = this_rq();
++
++	if (atomic_read(&rq->nr_iowait) > 0)
++		cpustat->iowait = cputime64_add(cpustat->iowait, cputime64);
++	else
++		cpustat->idle = cputime64_add(cpustat->idle, cputime64);
++}
++
++#ifndef CONFIG_VIRT_CPU_ACCOUNTING
++
++void account_process_tick(struct task_struct *p, int user_tick)
++{
++}
++
++/*
++ * Account multiple ticks of steal time.
++ * @p: the process from which the cpu time has been stolen
++ * @ticks: number of stolen ticks
++ */
++void account_steal_ticks(unsigned long ticks)
++{
++	account_steal_time(jiffies_to_cputime(ticks));
++}
++
++/*
++ * Account multiple ticks of idle time.
++ * @ticks: number of stolen ticks
++ */
++void account_idle_ticks(unsigned long ticks)
++{
++	account_idle_times(jiffies_to_cputime(ticks));
++}
++#endif
++
++/*
++ * Functions to test for when SCHED_ISO tasks have used their allocated
++ * quota as real time scheduling and convert them back to SCHED_NORMAL.
++ * Where possible, the data is tested lockless, to avoid grabbing grq_lock
++ * because the occasional inaccurate result won't matter. However the
++ * data is only ever modified under lock.
++ */
++static void set_iso_refractory(void)
++{
++	grq_lock();
++	grq.iso_refractory = 1;
++	grq_unlock();
++}
++
++static void clear_iso_refractory(void)
++{
++	grq_lock();
++	grq.iso_refractory = 0;
++	grq_unlock();
++}
++
++/*
++ * Test if SCHED_ISO tasks have run longer than their alloted period as RT
++ * tasks and set the refractory flag if necessary. There is 10% hysteresis
++ * for unsetting the flag.
++ */
++static unsigned int test_ret_isorefractory(struct rq *rq)
++{
++	if (likely(!grq.iso_refractory)) {
++		if (grq.iso_ticks / ISO_PERIOD > sched_iso_cpu)
++			set_iso_refractory();
++	} else {
++		if (grq.iso_ticks / ISO_PERIOD < (sched_iso_cpu * 90 / 100))
++			clear_iso_refractory();
++	}
++	return grq.iso_refractory;
++}
++
++static void iso_tick(void)
++{
++	grq_lock();
++	grq.iso_ticks += 100;
++	grq_unlock();
++}
++
++/* No SCHED_ISO task was running so decrease rq->iso_ticks */
++static inline void no_iso_tick(void)
++{
++	if (grq.iso_ticks) {
++		grq_lock();
++		grq.iso_ticks = grq.iso_ticks * (ISO_PERIOD - 1) / ISO_PERIOD;
++		grq_unlock();
++	}
++}
++
++static int rq_running_iso(struct rq *rq)
++{
++	return rq->rq_prio == ISO_PRIO;
++}
++
++/* This manages tasks that have run out of timeslice during a scheduler_tick */
++static void task_running_tick(struct rq *rq)
++{
++	struct task_struct *p;
++
++	/*
++	 * If a SCHED_ISO task is running we increment the iso_ticks. In
++	 * order to prevent SCHED_ISO tasks from causing starvation in the
++	 * presence of true RT tasks we account those as iso_ticks as well.
++	 */
++	if ((rt_queue(rq) || (iso_queue(rq) && !grq.iso_refractory))) {
++		if (grq.iso_ticks <= (ISO_PERIOD * 100) - 100)
++			iso_tick();
++	} else
++		no_iso_tick();
++
++	if (iso_queue(rq)) {
++		if (unlikely(test_ret_isorefractory(rq))) {
++			if (rq_running_iso(rq)) {
++				/*
++				 * SCHED_ISO task is running as RT and limit
++				 * has been hit. Force it to reschedule as
++				 * SCHED_NORMAL by zeroing its time_slice
++				 */
++				rq->rq_time_slice = 0;
++			}
++		}
++	}
++
++	/* SCHED_FIFO tasks never run out of timeslice. */
++	if (rq_idle(rq) || rq->rq_time_slice > 0 || rq->rq_policy == SCHED_FIFO)
++		return;
++
++	/* p->rt.time_slice <= 0. We only modify task_struct under grq lock */
++	grq_lock();
++	p = rq->curr;
++	if (likely(task_running(p))) {
++		requeue_task(p);
++		set_tsk_need_resched(p);
++	}
++	grq_unlock();
++}
++
++void wake_up_idle_cpu(int cpu);
++
++/*
++ * This function gets called by the timer code, with HZ frequency.
++ * We call it with interrupts disabled. The data modified is all
++ * local to struct rq so we don't need to grab grq lock.
++ */
++void scheduler_tick(void)
++{
++	int cpu = smp_processor_id();
++	struct rq *rq = cpu_rq(cpu);
++
++	sched_clock_tick();
++	update_rq_clock(rq);
++	update_cpu_clock(rq, rq->curr, 1);
++	if (!rq_idle(rq))
++		task_running_tick(rq);
++	else {
++		no_iso_tick();
++		if (unlikely(queued_notrunning()))
++			set_tsk_need_resched(rq->idle);
++	}
++}
++
++notrace unsigned long get_parent_ip(unsigned long addr)
++{
++	if (in_lock_functions(addr)) {
++		addr = CALLER_ADDR2;
++		if (in_lock_functions(addr))
++			addr = CALLER_ADDR3;
++	}
++	return addr;
++}
++
++#if defined(CONFIG_PREEMPT) && (defined(CONFIG_DEBUG_PREEMPT) || \
++				defined(CONFIG_PREEMPT_TRACER))
++void __kprobes add_preempt_count(int val)
++{
++#ifdef CONFIG_DEBUG_PREEMPT
++	/*
++	 * Underflow?
++	 */
++	if (DEBUG_LOCKS_WARN_ON((preempt_count() < 0)))
++		return;
++#endif
++	preempt_count() += val;
++#ifdef CONFIG_DEBUG_PREEMPT
++	/*
++	 * Spinlock count overflowing soon?
++	 */
++	DEBUG_LOCKS_WARN_ON((preempt_count() & PREEMPT_MASK) >=
++				PREEMPT_MASK - 10);
++#endif
++	if (preempt_count() == val)
++		trace_preempt_off(CALLER_ADDR0, get_parent_ip(CALLER_ADDR1));
++}
++EXPORT_SYMBOL(add_preempt_count);
++
++void __kprobes sub_preempt_count(int val)
++{
++#ifdef CONFIG_DEBUG_PREEMPT
++	/*
++	 * Underflow?
++	 */
++	if (DEBUG_LOCKS_WARN_ON(val > preempt_count()))
++		return;
++	/*
++	 * Is the spinlock portion underflowing?
++	 */
++	if (DEBUG_LOCKS_WARN_ON((val < PREEMPT_MASK) &&
++			!(preempt_count() & PREEMPT_MASK)))
++		return;
++#endif
++
++	if (preempt_count() == val)
++		trace_preempt_on(CALLER_ADDR0, get_parent_ip(CALLER_ADDR1));
++	preempt_count() -= val;
++}
++EXPORT_SYMBOL(sub_preempt_count);
++#endif
++
++/*
++ * Deadline is "now" in jiffies + (offset by priority). Setting the deadline
++ * is the key to everything. It distributes cpu fairly amongst tasks of the
++ * same nice value, it proportions cpu according to nice level, it means the
++ * task that last woke up the longest ago has the earliest deadline, thus
++ * ensuring that interactive tasks get low latency on wake up.
++ */
++static inline int prio_deadline_diff(struct task_struct *p)
++{
++	return (pratio(p) * rr_interval * HZ / 1000 / 100) ? : 1;
++}
++
++static inline int longest_deadline(void)
++{
++	return (prio_ratios[39] * rr_interval * HZ / 1000 / 100);
++}
++
++/*
++ * SCHED_IDLE tasks still have a deadline set, but offset by to nice +19.
++ * This allows nice levels to work between IDLEPRIO tasks and gives a
++ * deadline longer than nice +19 for when they're scheduled as SCHED_NORMAL
++ * tasks.
++ */
++static inline void time_slice_expired(struct task_struct *p)
++{
++	reset_first_time_slice(p);
++	p->rt.time_slice = timeslice();
++	p->deadline = jiffies + prio_deadline_diff(p);
++	if (idleprio_task(p))
++		p->deadline += longest_deadline();
++}
++
++static inline void check_deadline(struct task_struct *p)
++{
++	if (p->rt.time_slice <= 0)
++		time_slice_expired(p);
++}
++
++/*
++ * O(n) lookup of all tasks in the global runqueue. The real brainfuck
++ * of lock contention and O(n). It's not really O(n) as only the queued,
++ * but not running tasks are scanned, and is O(n) queued in the worst case
++ * scenario only because the right task can be found before scanning all of
++ * them.
++ * Tasks are selected in this order:
++ * Real time tasks are selected purely by their static priority and in the
++ * order they were queued, so the lowest value idx, and the first queued task
++ * of that priority value is chosen.
++ * If no real time tasks are found, the SCHED_ISO priority is checked, and
++ * all SCHED_ISO tasks have the same priority value, so they're selected by
++ * the earliest deadline value.
++ * If no SCHED_ISO tasks are found, SCHED_NORMAL tasks are selected by the
++ * earliest deadline.
++ * Finally if no SCHED_NORMAL tasks are found, SCHED_IDLEPRIO tasks are
++ * selected by the earliest deadline.
++ */
++static inline struct
++task_struct *earliest_deadline_task(struct rq *rq, struct task_struct *idle)
++{
++	unsigned long dl, earliest_deadline = 0; /* Initialise to silence compiler */
++	struct task_struct *p, *edt;
++	unsigned int cpu = rq->cpu;
++	struct list_head *queue;
++	int idx = 0;
++
++	edt = idle;
++retry:
++	idx = find_next_bit(grq.prio_bitmap, PRIO_LIMIT, idx);
++	if (idx >= PRIO_LIMIT)
++		goto out;
++	queue = &grq.queue[idx];
++	list_for_each_entry(p, queue, rt.run_list) {
++		/* Make sure cpu affinity is ok */
++		if (!cpu_isset(cpu, p->cpus_allowed))
++			continue;
++		if (idx < MAX_RT_PRIO) {
++			/* We found an rt task */
++			edt = p;
++			goto out_take;
++		}
++
++		/*
++		 * No rt task, select the earliest deadline task now.
++		 * On the 1st run the 2nd condition is never used, so
++		 * there is no need to initialise earliest_deadline
++		 * before. Normalise all old deadlines to now.
++		 */
++		if (time_before(p->deadline, jiffies))
++			dl = jiffies;
++		else
++			dl = p->deadline;
++
++		if (edt == idle ||
++		    time_before(dl, earliest_deadline)) {
++			earliest_deadline = dl;
++			edt = p;
++		}
++	}
++	if (edt == idle) {
++		if (++idx < PRIO_LIMIT)
++			goto retry;
++		goto out;
++	}
++out_take:
++	take_task(rq, edt);
++out:
++	return edt;
++}
++
++#ifdef CONFIG_SMP
++static inline void set_cpuidle_map(unsigned long cpu)
++{
++	cpu_set(cpu, grq.cpu_idle_map);
++}
++
++static inline void clear_cpuidle_map(unsigned long cpu)
++{
++	cpu_clear(cpu, grq.cpu_idle_map);
++}
++
++#else /* CONFIG_SMP */
++static inline void set_cpuidle_map(unsigned long cpu)
++{
++}
++
++static inline void clear_cpuidle_map(unsigned long cpu)
++{
++}
++#endif /* !CONFIG_SMP */
++
++/*
++ * Print scheduling while atomic bug:
++ */
++static noinline void __schedule_bug(struct task_struct *prev)
++{
++	struct pt_regs *regs = get_irq_regs();
++
++	printk(KERN_ERR "BUG: scheduling while atomic: %s/%d/0x%08x\n",
++		prev->comm, prev->pid, preempt_count());
++
++	debug_show_held_locks(prev);
++	print_modules();
++	if (irqs_disabled())
++		print_irqtrace_events(prev);
++
++	if (regs)
++		show_regs(regs);
++	else
++		dump_stack();
++}
++
++/*
++ * Various schedule()-time debugging checks and statistics:
++ */
++static inline void schedule_debug(struct task_struct *prev)
++{
++	/*
++	 * Test if we are atomic. Since do_exit() needs to call into
++	 * schedule() atomically, we ignore that path for now.
++	 * Otherwise, whine if we are scheduling when we should not be.
++	 */
++	if (unlikely(in_atomic_preempt_off() && !prev->exit_state))
++		__schedule_bug(prev);
++
++	profile_hit(SCHED_PROFILING, __builtin_return_address(0));
++
++	schedstat_inc(this_rq(), sched_count);
++#ifdef CONFIG_SCHEDSTATS
++	if (unlikely(prev->lock_depth >= 0)) {
++		schedstat_inc(this_rq(), bkl_count);
++		schedstat_inc(prev, sched_info.bkl_count);
++	}
++#endif
++}
++
++/*
++ * schedule() is the main scheduler function.
++ */
++asmlinkage void __sched __schedule(void)
++{
++	struct task_struct *prev, *next, *idle;
++	int deactivate = 0, cpu;
++	long *switch_count;
++	struct rq *rq;
++	u64 now;
++
++	cpu = smp_processor_id();
++	rq = this_rq();
++	rcu_qsctr_inc(cpu);
++	prev = rq->curr;
++	switch_count = &prev->nivcsw;
++
++	release_kernel_lock(prev);
++need_resched_nonpreemptible:
++
++	schedule_debug(prev);
++	idle = rq->idle;
++	/*
++	 * The idle thread is not allowed to schedule!
++	 * Remove this check after it has been exercised a bit.
++	 */
++	if (unlikely(prev == idle) && prev->state != TASK_RUNNING) {
++		printk(KERN_ERR "bad: scheduling from the idle thread!\n");
++		dump_stack();
++	}
++
++	grq_lock_irq();
++	update_rq_clock(rq);
++	now = rq->clock;
++	update_cpu_clock(rq, prev, 0);
++
++	clear_tsk_need_resched(prev);
++
++	if (prev->state && !(preempt_count() & PREEMPT_ACTIVE)) {
++		if (unlikely(signal_pending_state(prev->state, prev)))
++			prev->state = TASK_RUNNING;
++		else
++			deactivate = 1;
++		switch_count = &prev->nvcsw;
++	}
++
++	if (prev != idle) {
++		/* Update all the information stored on struct rq */
++		prev->rt.time_slice = rq->rq_time_slice;
++		prev->deadline = rq->rq_deadline;
++		check_deadline(prev);
++		return_task(prev, deactivate);
++	}
++
++	if (likely(queued_notrunning())) {
++		next = earliest_deadline_task(rq, idle);
++	} else {
++		next = idle;
++		schedstat_inc(rq, sched_goidle);
++	}
++
++	if (next == rq->idle)
++		set_cpuidle_map(cpu);
++	else
++		clear_cpuidle_map(cpu);
++
++	prefetch(next);
++	prefetch_stack(next);
++
++	prev->timestamp = prev->last_ran = now;
++
++	if (likely(prev != next)) {
++		rq->rq_time_slice = next->rt.time_slice;
++		rq->rq_deadline = next->deadline;
++		rq->rq_prio = next->prio;
++
++		sched_info_switch(prev, next);
++		grq.nr_switches++;
++		next->oncpu = 1;
++		prev->oncpu = 0;
++		rq->curr = next;
++		++*switch_count;
++
++		context_switch(rq, prev, next); /* unlocks the rq */
++		/*
++		 * the context switch might have flipped the stack from under
++		 * us, hence refresh the local variables.
++		 */
++		cpu = smp_processor_id();
++		rq = cpu_rq(cpu);
++	} else
++		grq_unlock_irq();
++
++	if (unlikely(reacquire_kernel_lock(current) < 0))
++		goto need_resched_nonpreemptible;
++}
++
++asmlinkage void __sched schedule(void)
++{
++need_resched:
++	preempt_disable();
++	__schedule();
++	preempt_enable_no_resched();
++	if (unlikely(test_thread_flag(TIF_NEED_RESCHED)))
++		goto need_resched;
++}
++EXPORT_SYMBOL(schedule);
++
++#ifdef CONFIG_SMP
++int mutex_spin_on_owner(struct mutex *lock, struct thread_info *owner)
++{
++	return 0;
++}
++#endif
++
++#ifdef CONFIG_PREEMPT
++/*
++ * this is the entry point to schedule() from in-kernel preemption
++ * off of preempt_enable. Kernel preemptions off return from interrupt
++ * occur there and call schedule directly.
++ */
++asmlinkage void __sched preempt_schedule(void)
++{
++	struct thread_info *ti = current_thread_info();
++
++	/*
++	 * If there is a non-zero preempt_count or interrupts are disabled,
++	 * we do not want to preempt the current task. Just return..
++	 */
++	if (likely(ti->preempt_count || irqs_disabled()))
++		return;
++
++	do {
++		add_preempt_count(PREEMPT_ACTIVE);
++		schedule();
++		sub_preempt_count(PREEMPT_ACTIVE);
++
++		/*
++		 * Check again in case we missed a preemption opportunity
++		 * between schedule and now.
++		 */
++		barrier();
++	} while (need_resched());
++}
++EXPORT_SYMBOL(preempt_schedule);
++
++/*
++ * this is the entry point to schedule() from kernel preemption
++ * off of irq context.
++ * Note, that this is called and return with irqs disabled. This will
++ * protect us against recursive calling from irq.
++ */
++asmlinkage void __sched preempt_schedule_irq(void)
++{
++	struct thread_info *ti = current_thread_info();
++
++	/* Catch callers which need to be fixed */
++	BUG_ON(ti->preempt_count || !irqs_disabled());
++
++	do {
++		add_preempt_count(PREEMPT_ACTIVE);
++		local_irq_enable();
++		schedule();
++		local_irq_disable();
++		sub_preempt_count(PREEMPT_ACTIVE);
++
++		/*
++		 * Check again in case we missed a preemption opportunity
++		 * between schedule and now.
++		 */
++		barrier();
++	} while (need_resched());
++}
++
++#endif /* CONFIG_PREEMPT */
++
++int default_wake_function(wait_queue_t *curr, unsigned mode, int sync,
++			  void *key)
++{
++	return try_to_wake_up(curr->private, mode, sync);
++}
++EXPORT_SYMBOL(default_wake_function);
++
++/*
++ * The core wakeup function.  Non-exclusive wakeups (nr_exclusive == 0) just
++ * wake everything up.  If it's an exclusive wakeup (nr_exclusive == small +ve
++ * number) then we wake all the non-exclusive tasks and one exclusive task.
++ *
++ * There are circumstances in which we can try to wake a task which has already
++ * started to run but is not in state TASK_RUNNING.  try_to_wake_up() returns
++ * zero in this (rare) case, and we handle it by continuing to scan the queue.
++ */
++void __wake_up_common(wait_queue_head_t *q, unsigned int mode,
++		      int nr_exclusive, int sync, void *key)
++{
++	struct list_head *tmp, *next;
++
++	list_for_each_safe(tmp, next, &q->task_list) {
++		wait_queue_t *curr = list_entry(tmp, wait_queue_t, task_list);
++		unsigned flags = curr->flags;
++
++		if (curr->func(curr, mode, sync, key) &&
++				(flags & WQ_FLAG_EXCLUSIVE) && !--nr_exclusive)
++			break;
++	}
++}
++
++/**
++ * __wake_up - wake up threads blocked on a waitqueue.
++ * @q: the waitqueue
++ * @mode: which threads
++ * @nr_exclusive: how many wake-one or wake-many threads to wake up
++ * @key: is directly passed to the wakeup function
++ *
++ * It may be assumed that this function implies a write memory barrier before
++ * changing the task state if and only if any tasks are woken up.
++ */
++void __wake_up(wait_queue_head_t *q, unsigned int mode,
++			int nr_exclusive, void *key)
++{
++	unsigned long flags;
++
++	spin_lock_irqsave(&q->lock, flags);
++	__wake_up_common(q, mode, nr_exclusive, 0, key);
++	spin_unlock_irqrestore(&q->lock, flags);
++}
++EXPORT_SYMBOL(__wake_up);
++
++/*
++ * Same as __wake_up but called with the spinlock in wait_queue_head_t held.
++ */
++void __wake_up_locked(wait_queue_head_t *q, unsigned int mode)
++{
++	__wake_up_common(q, mode, 1, 0, NULL);
++}
++
++void __wake_up_locked_key(wait_queue_head_t *q, unsigned int mode, void *key)
++{
++	__wake_up_common(q, mode, 1, 0, key);
++}
++
++/**
++ * __wake_up_sync_key - wake up threads blocked on a waitqueue.
++ * @q: the waitqueue
++ * @mode: which threads
++ * @nr_exclusive: how many wake-one or wake-many threads to wake up
++ * @key: opaque value to be passed to wakeup targets
++ *
++ * The sync wakeup differs that the waker knows that it will schedule
++ * away soon, so while the target thread will be woken up, it will not
++ * be migrated to another CPU - ie. the two threads are 'synchronized'
++ * with each other. This can prevent needless bouncing between CPUs.
++ *
++ * On UP it can prevent extra preemption.
++ *
++ * It may be assumed that this function implies a write memory barrier before
++ * changing the task state if and only if any tasks are woken up.
++ */
++void __wake_up_sync_key(wait_queue_head_t *q, unsigned int mode,
++			int nr_exclusive, void *key)
++{
++	unsigned long flags;
++	int sync = 1;
++
++	if (unlikely(!q))
++		return;
++
++	if (unlikely(!nr_exclusive))
++		sync = 0;
++
++	spin_lock_irqsave(&q->lock, flags);
++	__wake_up_common(q, mode, nr_exclusive, sync, key);
++	spin_unlock_irqrestore(&q->lock, flags);
++}
++EXPORT_SYMBOL_GPL(__wake_up_sync_key);
++
++/**
++ * __wake_up_sync - wake up threads blocked on a waitqueue.
++ * @q: the waitqueue
++ * @mode: which threads
++ * @nr_exclusive: how many wake-one or wake-many threads to wake up
++ *
++ * The sync wakeup differs that the waker knows that it will schedule
++ * away soon, so while the target thread will be woken up, it will not
++ * be migrated to another CPU - ie. the two threads are 'synchronized'
++ * with each other. This can prevent needless bouncing between CPUs.
++ *
++ * On UP it can prevent extra preemption.
++ */
++void __wake_up_sync(wait_queue_head_t *q, unsigned int mode, int nr_exclusive)
++{
++	unsigned long flags;
++	int sync = 1;
++
++	if (unlikely(!q))
++		return;
++
++	if (unlikely(!nr_exclusive))
++		sync = 0;
++
++	spin_lock_irqsave(&q->lock, flags);
++	__wake_up_common(q, mode, nr_exclusive, sync, NULL);
++	spin_unlock_irqrestore(&q->lock, flags);
++}
++EXPORT_SYMBOL_GPL(__wake_up_sync);	/* For internal use only */
++
++/**
++ * complete: - signals a single thread waiting on this completion
++ * @x:  holds the state of this particular completion
++ *
++ * This will wake up a single thread waiting on this completion. Threads will be
++ * awakened in the same order in which they were queued.
++ *
++ * See also complete_all(), wait_for_completion() and related routines.
++ *
++ * It may be assumed that this function implies a write memory barrier before
++ * changing the task state if and only if any tasks are woken up.
++ */
++void complete(struct completion *x)
++{
++	unsigned long flags;
++
++	spin_lock_irqsave(&x->wait.lock, flags);
++	x->done++;
++	__wake_up_common(&x->wait, TASK_NORMAL, 1, 0, NULL);
++	spin_unlock_irqrestore(&x->wait.lock, flags);
++}
++EXPORT_SYMBOL(complete);
++
++/**
++ * complete_all: - signals all threads waiting on this completion
++ * @x:  holds the state of this particular completion
++ *
++ * This will wake up all threads waiting on this particular completion event.
++ *
++ * It may be assumed that this function implies a write memory barrier before
++ * changing the task state if and only if any tasks are woken up.
++ */
++void complete_all(struct completion *x)
++{
++	unsigned long flags;
++
++	spin_lock_irqsave(&x->wait.lock, flags);
++	x->done += UINT_MAX/2;
++	__wake_up_common(&x->wait, TASK_NORMAL, 0, 0, NULL);
++	spin_unlock_irqrestore(&x->wait.lock, flags);
++}
++EXPORT_SYMBOL(complete_all);
++
++static inline long __sched
++do_wait_for_common(struct completion *x, long timeout, int state)
++{
++	if (!x->done) {
++		DECLARE_WAITQUEUE(wait, current);
++
++		wait.flags |= WQ_FLAG_EXCLUSIVE;
++		__add_wait_queue_tail(&x->wait, &wait);
++		do {
++			if (signal_pending_state(state, current)) {
++				timeout = -ERESTARTSYS;
++				break;
++			}
++			__set_current_state(state);
++			spin_unlock_irq(&x->wait.lock);
++			timeout = schedule_timeout(timeout);
++			spin_lock_irq(&x->wait.lock);
++		} while (!x->done && timeout);
++		__remove_wait_queue(&x->wait, &wait);
++		if (!x->done)
++			return timeout;
++	}
++	x->done--;
++	return timeout ?: 1;
++}
++
++static long __sched
++wait_for_common(struct completion *x, long timeout, int state)
++{
++	might_sleep();
++
++	spin_lock_irq(&x->wait.lock);
++	timeout = do_wait_for_common(x, timeout, state);
++	spin_unlock_irq(&x->wait.lock);
++	return timeout;
++}
++
++/**
++ * wait_for_completion: - waits for completion of a task
++ * @x:  holds the state of this particular completion
++ *
++ * This waits to be signaled for completion of a specific task. It is NOT
++ * interruptible and there is no timeout.
++ *
++ * See also similar routines (i.e. wait_for_completion_timeout()) with timeout
++ * and interrupt capability. Also see complete().
++ */
++void __sched wait_for_completion(struct completion *x)
++{
++	wait_for_common(x, MAX_SCHEDULE_TIMEOUT, TASK_UNINTERRUPTIBLE);
++}
++EXPORT_SYMBOL(wait_for_completion);
++
++/**
++ * wait_for_completion_timeout: - waits for completion of a task (w/timeout)
++ * @x:  holds the state of this particular completion
++ * @timeout:  timeout value in jiffies
++ *
++ * This waits for either a completion of a specific task to be signaled or for a
++ * specified timeout to expire. The timeout is in jiffies. It is not
++ * interruptible.
++ */
++unsigned long __sched
++wait_for_completion_timeout(struct completion *x, unsigned long timeout)
++{
++	return wait_for_common(x, timeout, TASK_UNINTERRUPTIBLE);
++}
++EXPORT_SYMBOL(wait_for_completion_timeout);
++
++/**
++ * wait_for_completion_interruptible: - waits for completion of a task (w/intr)
++ * @x:  holds the state of this particular completion
++ *
++ * This waits for completion of a specific task to be signaled. It is
++ * interruptible.
++ */
++int __sched wait_for_completion_interruptible(struct completion *x)
++{
++	long t = wait_for_common(x, MAX_SCHEDULE_TIMEOUT, TASK_INTERRUPTIBLE);
++	if (t == -ERESTARTSYS)
++		return t;
++	return 0;
++}
++EXPORT_SYMBOL(wait_for_completion_interruptible);
++
++/**
++ * wait_for_completion_interruptible_timeout: - waits for completion (w/(to,intr))
++ * @x:  holds the state of this particular completion
++ * @timeout:  timeout value in jiffies
++ *
++ * This waits for either a completion of a specific task to be signaled or for a
++ * specified timeout to expire. It is interruptible. The timeout is in jiffies.
++ */
++unsigned long __sched
++wait_for_completion_interruptible_timeout(struct completion *x,
++					  unsigned long timeout)
++{
++	return wait_for_common(x, timeout, TASK_INTERRUPTIBLE);
++}
++EXPORT_SYMBOL(wait_for_completion_interruptible_timeout);
++
++/**
++ * wait_for_completion_killable: - waits for completion of a task (killable)
++ * @x:  holds the state of this particular completion
++ *
++ * This waits to be signaled for completion of a specific task. It can be
++ * interrupted by a kill signal.
++ */
++int __sched wait_for_completion_killable(struct completion *x)
++{
++	long t = wait_for_common(x, MAX_SCHEDULE_TIMEOUT, TASK_KILLABLE);
++	if (t == -ERESTARTSYS)
++		return t;
++	return 0;
++}
++EXPORT_SYMBOL(wait_for_completion_killable);
++
++/**
++ *	try_wait_for_completion - try to decrement a completion without blocking
++ *	@x:	completion structure
++ *
++ *	Returns: 0 if a decrement cannot be done without blocking
++ *		 1 if a decrement succeeded.
++ *
++ *	If a completion is being used as a counting completion,
++ *	attempt to decrement the counter without blocking. This
++ *	enables us to avoid waiting if the resource the completion
++ *	is protecting is not available.
++ */
++bool try_wait_for_completion(struct completion *x)
++{
++	int ret = 1;
++
++	spin_lock_irq(&x->wait.lock);
++	if (!x->done)
++		ret = 0;
++	else
++		x->done--;
++	spin_unlock_irq(&x->wait.lock);
++	return ret;
++}
++EXPORT_SYMBOL(try_wait_for_completion);
++
++/**
++ *	completion_done - Test to see if a completion has any waiters
++ *	@x:	completion structure
++ *
++ *	Returns: 0 if there are waiters (wait_for_completion() in progress)
++ *		 1 if there are no waiters.
++ *
++ */
++bool completion_done(struct completion *x)
++{
++	int ret = 1;
++
++	spin_lock_irq(&x->wait.lock);
++	if (!x->done)
++		ret = 0;
++	spin_unlock_irq(&x->wait.lock);
++	return ret;
++}
++EXPORT_SYMBOL(completion_done);
++
++static long __sched
++sleep_on_common(wait_queue_head_t *q, int state, long timeout)
++{
++	unsigned long flags;
++	wait_queue_t wait;
++
++	init_waitqueue_entry(&wait, current);
++
++	__set_current_state(state);
++
++	spin_lock_irqsave(&q->lock, flags);
++	__add_wait_queue(q, &wait);
++	spin_unlock(&q->lock);
++	timeout = schedule_timeout(timeout);
++	spin_lock_irq(&q->lock);
++	__remove_wait_queue(q, &wait);
++	spin_unlock_irqrestore(&q->lock, flags);
++
++	return timeout;
++}
++
++void __sched interruptible_sleep_on(wait_queue_head_t *q)
++{
++	sleep_on_common(q, TASK_INTERRUPTIBLE, MAX_SCHEDULE_TIMEOUT);
++}
++EXPORT_SYMBOL(interruptible_sleep_on);
++
++long __sched
++interruptible_sleep_on_timeout(wait_queue_head_t *q, long timeout)
++{
++	return sleep_on_common(q, TASK_INTERRUPTIBLE, timeout);
++}
++EXPORT_SYMBOL(interruptible_sleep_on_timeout);
++
++void __sched sleep_on(wait_queue_head_t *q)
++{
++	sleep_on_common(q, TASK_UNINTERRUPTIBLE, MAX_SCHEDULE_TIMEOUT);
++}
++EXPORT_SYMBOL(sleep_on);
++
++long __sched sleep_on_timeout(wait_queue_head_t *q, long timeout)
++{
++	return sleep_on_common(q, TASK_UNINTERRUPTIBLE, timeout);
++}
++EXPORT_SYMBOL(sleep_on_timeout);
++
++#ifdef CONFIG_RT_MUTEXES
++
++/*
++ * rt_mutex_setprio - set the current priority of a task
++ * @p: task
++ * @prio: prio value (kernel-internal form)
++ *
++ * This function changes the 'effective' priority of a task. It does
++ * not touch ->normal_prio like __setscheduler().
++ *
++ * Used by the rt_mutex code to implement priority inheritance logic.
++ */
++void rt_mutex_setprio(struct task_struct *p, int prio)
++{
++	unsigned long flags;
++	int queued, oldprio;
++	struct rq *rq;
++
++	BUG_ON(prio < 0 || prio > MAX_PRIO);
++
++	rq = time_task_grq_lock(p, &flags);
++
++	oldprio = p->prio;
++	queued = task_queued_only(p);
++	if (queued)
++		dequeue_task(p);
++	p->prio = prio;
++	if (task_running(p) && prio > oldprio)
++		resched_task(p);
++	if (queued) {
++		enqueue_task(p);
++		try_preempt(p);
++	}
++
++	task_grq_unlock(&flags);
++}
++
++#endif
++
++/*
++ * Adjust the deadline for when the priority is to change, before it's
++ * changed.
++ */
++static void adjust_deadline(struct task_struct *p, int new_prio)
++{
++	p->deadline += (prio_ratios[USER_PRIO(new_prio)] - pratio(p)) *
++			rr_interval * HZ / 1000 / 100;
++}
++
++void set_user_nice(struct task_struct *p, long nice)
++{
++	int queued, new_static;
++	unsigned long flags;
++	struct rq *rq;
++
++	if (TASK_NICE(p) == nice || nice < -20 || nice > 19)
++		return;
++	new_static = NICE_TO_PRIO(nice);
++	/*
++	 * We have to be careful, if called from sys_setpriority(),
++	 * the task might be in the middle of scheduling on another CPU.
++	 */
++	rq = time_task_grq_lock(p, &flags);
++	/*
++	 * The RT priorities are set via sched_setscheduler(), but we still
++	 * allow the 'normal' nice value to be set - but as expected
++	 * it wont have any effect on scheduling until the task is
++	 * not SCHED_NORMAL/SCHED_BATCH:
++	 */
++	if (has_rt_policy(p)) {
++		p->static_prio = new_static;
++		goto out_unlock;
++	}
++	queued = task_queued_only(p);
++	/*
++	 * If p is actually running, we don't need to do anything when
++	 * changing the priority because the grq is unaffected.
++	 */
++	if (queued)
++		dequeue_task(p);
++
++	adjust_deadline(p, new_static);
++	p->static_prio = new_static;
++	p->prio = effective_prio(p);
++
++	if (queued) {
++		enqueue_task(p);
++		try_preempt(p);
++	}
++
++	/* Just resched the task, schedule() will know what to do. */
++	if (task_running(p))
++		resched_task(p);
++out_unlock:
++	task_grq_unlock(&flags);
++}
++EXPORT_SYMBOL(set_user_nice);
++
++/*
++ * can_nice - check if a task can reduce its nice value
++ * @p: task
++ * @nice: nice value
++ */
++int can_nice(const struct task_struct *p, const int nice)
++{
++	/* convert nice value [19,-20] to rlimit style value [1,40] */
++	int nice_rlim = 20 - nice;
++
++	return (nice_rlim <= p->signal->rlim[RLIMIT_NICE].rlim_cur ||
++		capable(CAP_SYS_NICE));
++}
++
++#ifdef __ARCH_WANT_SYS_NICE
++
++/*
++ * sys_nice - change the priority of the current process.
++ * @increment: priority increment
++ *
++ * sys_setpriority is a more generic, but much slower function that
++ * does similar things.
++ */
++SYSCALL_DEFINE1(nice, int, increment)
++{
++	long nice, retval;
++
++	/*
++	 * Setpriority might change our priority at the same moment.
++	 * We don't have to worry. Conceptually one call occurs first
++	 * and we have a single winner.
++	 */
++	if (increment < -40)
++		increment = -40;
++	if (increment > 40)
++		increment = 40;
++
++	nice = TASK_NICE(current) + increment;
++	if (nice < -20)
++		nice = -20;
++	if (nice > 19)
++		nice = 19;
++
++	if (increment < 0 && !can_nice(current, nice))
++		return -EPERM;
++
++	retval = security_task_setnice(current, nice);
++	if (retval)
++		return retval;
++
++	set_user_nice(current, nice);
++	return 0;
++}
++
++#endif
++
++/**
++ * task_prio - return the priority value of a given task.
++ * @p: the task in question.
++ *
++ * This is the priority value as seen by users in /proc.
++ * RT tasks are offset by -100. Normal tasks are centered
++ * around 1, value goes from 0 (SCHED_ISO) up to 82 (nice +19
++ * SCHED_IDLE).
++ */
++int task_prio(const struct task_struct *p)
++{
++	int delta, prio = p->prio - MAX_RT_PRIO;
++
++	/* rt tasks and iso tasks */
++	if (prio <= 0)
++		goto out;
++
++	delta = (p->deadline - jiffies) * 40 / longest_deadline();
++	if (delta > 0 && delta <= 80)
++		prio += delta;
++out:
++	return prio;
++}
++
++/**
++ * task_nice - return the nice value of a given task.
++ * @p: the task in question.
++ */
++int task_nice(const struct task_struct *p)
++{
++	return TASK_NICE(p);
++}
++EXPORT_SYMBOL_GPL(task_nice);
++
++/**
++ * idle_cpu - is a given cpu idle currently?
++ * @cpu: the processor in question.
++ */
++int idle_cpu(int cpu)
++{
++	return cpu_curr(cpu) == cpu_rq(cpu)->idle;
++}
++
++/**
++ * idle_task - return the idle task for a given cpu.
++ * @cpu: the processor in question.
++ */
++struct task_struct *idle_task(int cpu)
++{
++	return cpu_rq(cpu)->idle;
++}
++
++/**
++ * find_process_by_pid - find a process with a matching PID value.
++ * @pid: the pid in question.
++ */
++static inline struct task_struct *find_process_by_pid(pid_t pid)
++{
++	return pid ? find_task_by_vpid(pid) : current;
++}
++
++/* Actually do priority change: must hold grq lock. */
++static void __setscheduler(struct task_struct *p, int policy, int prio)
++{
++	BUG_ON(task_queued_only(p));
++
++	p->policy = policy;
++	p->rt_priority = prio;
++	p->normal_prio = normal_prio(p);
++	/* we are holding p->pi_lock already */
++	p->prio = rt_mutex_getprio(p);
++	/*
++	 * Reschedule if running. schedule() will know if it can continue
++	 * running or not.
++	 */
++	if (task_running(p))
++		resched_task(p);
++}
++
++/*
++ * check the target process has a UID that matches the current process's
++ */
++static bool check_same_owner(struct task_struct *p)
++{
++	const struct cred *cred = current_cred(), *pcred;
++	bool match;
++
++	rcu_read_lock();
++	pcred = __task_cred(p);
++	match = (cred->euid == pcred->euid ||
++		 cred->euid == pcred->uid);
++	rcu_read_unlock();
++	return match;
++}
++
++static int __sched_setscheduler(struct task_struct *p, int policy,
++		       struct sched_param *param, bool user)
++{
++	struct sched_param zero_param = { .sched_priority = 0 };
++	int queued, retval, oldprio, oldpolicy = -1;
++	unsigned long flags, rlim_rtprio = 0;
++	struct rq *rq;
++
++	/* may grab non-irq protected spin_locks */
++	BUG_ON(in_interrupt());
++
++	if (is_rt_policy(policy) && !capable(CAP_SYS_NICE)) {
++		unsigned long lflags;
++
++		if (!lock_task_sighand(p, &lflags))
++			return -ESRCH;
++		rlim_rtprio = p->signal->rlim[RLIMIT_RTPRIO].rlim_cur;
++		unlock_task_sighand(p, &lflags);
++		if (rlim_rtprio)
++			goto recheck;
++		/*
++		 * If the caller requested an RT policy without having the
++		 * necessary rights, we downgrade the policy to SCHED_ISO.
++		 * We also set the parameter to zero to pass the checks.
++		 */
++		policy = SCHED_ISO;
++		param = &zero_param;
++	}
++recheck:
++	/* double check policy once rq lock held */
++	if (policy < 0)
++		policy = oldpolicy = p->policy;
++	else if (!SCHED_RANGE(policy))
++		return -EINVAL;
++	/*
++	 * Valid priorities for SCHED_FIFO and SCHED_RR are
++	 * 1..MAX_USER_RT_PRIO-1, valid priority for SCHED_NORMAL and
++	 * SCHED_BATCH is 0.
++	 */
++	if (param->sched_priority < 0 ||
++	    (p->mm && param->sched_priority > MAX_USER_RT_PRIO-1) ||
++	    (!p->mm && param->sched_priority > MAX_RT_PRIO-1))
++		return -EINVAL;
++	if (is_rt_policy(policy) != (param->sched_priority != 0))
++		return -EINVAL;
++
++	/*
++	 * Allow unprivileged RT tasks to decrease priority:
++	 */
++	if (user && !capable(CAP_SYS_NICE)) {
++		if (is_rt_policy(policy)) {
++			/* can't set/change the rt policy */
++			if (policy != p->policy && !rlim_rtprio)
++				return -EPERM;
++
++			/* can't increase priority */
++			if (param->sched_priority > p->rt_priority &&
++			    param->sched_priority > rlim_rtprio)
++				return -EPERM;
++		} else {
++			switch (p->policy) {
++				/*
++				 * Can only downgrade policies but not back to
++				 * SCHED_NORMAL
++				 */
++				case SCHED_ISO:
++					if (policy == SCHED_ISO)
++						goto out;
++					if (policy == SCHED_NORMAL)
++						return -EPERM;
++					break;
++				case SCHED_BATCH:
++					if (policy == SCHED_BATCH)
++						goto out;
++					if (policy != SCHED_IDLE)
++					    	return -EPERM;
++					break;
++				case SCHED_IDLE:
++					if (policy == SCHED_IDLE)
++						goto out;
++					return -EPERM;
++				default:
++					break;
++			}
++		}
++
++		/* can't change other user's priorities */
++		if (!check_same_owner(p))
++			return -EPERM;
++	}
++
++	retval = security_task_setscheduler(p, policy, param);
++	if (retval)
++		return retval;
++	/*
++	 * make sure no PI-waiters arrive (or leave) while we are
++	 * changing the priority of the task:
++	 */
++	spin_lock_irqsave(&p->pi_lock, flags);
++	/*
++	 * To be able to change p->policy safely, the apropriate
++	 * runqueue lock must be held.
++	 */
++	rq = __task_grq_lock(p);
++	/* recheck policy now with rq lock held */
++	if (unlikely(oldpolicy != -1 && oldpolicy != p->policy)) {
++		__task_grq_unlock();
++		spin_unlock_irqrestore(&p->pi_lock, flags);
++		policy = oldpolicy = -1;
++		goto recheck;
++	}
++	update_rq_clock(rq);
++	queued = task_queued_only(p);
++	if (queued)
++		dequeue_task(p);
++	oldprio = p->prio;
++	__setscheduler(p, policy, param->sched_priority);
++	if (queued) {
++		enqueue_task(p);
++		try_preempt(p);
++	}
++	__task_grq_unlock();
++	spin_unlock_irqrestore(&p->pi_lock, flags);
++
++	rt_mutex_adjust_pi(p);
++out:
++	return 0;
++}
++
++/**
++ * sched_setscheduler - change the scheduling policy and/or RT priority of a thread.
++ * @p: the task in question.
++ * @policy: new policy.
++ * @param: structure containing the new RT priority.
++ *
++ * NOTE that the task may be already dead.
++ */
++int sched_setscheduler(struct task_struct *p, int policy,
++		       struct sched_param *param)
++{
++	return __sched_setscheduler(p, policy, param, true);
++}
++
++EXPORT_SYMBOL_GPL(sched_setscheduler);
++
++/**
++ * sched_setscheduler_nocheck - change the scheduling policy and/or RT priority of a thread from kernelspace.
++ * @p: the task in question.
++ * @policy: new policy.
++ * @param: structure containing the new RT priority.
++ *
++ * Just like sched_setscheduler, only don't bother checking if the
++ * current context has permission.  For example, this is needed in
++ * stop_machine(): we create temporary high priority worker threads,
++ * but our caller might not have that capability.
++ */
++int sched_setscheduler_nocheck(struct task_struct *p, int policy,
++			       struct sched_param *param)
++{
++	return __sched_setscheduler(p, policy, param, false);
++}
++
++static int
++do_sched_setscheduler(pid_t pid, int policy, struct sched_param __user *param)
++{
++	struct sched_param lparam;
++	struct task_struct *p;
++	int retval;
++
++	if (!param || pid < 0)
++		return -EINVAL;
++	if (copy_from_user(&lparam, param, sizeof(struct sched_param)))
++		return -EFAULT;
++
++	rcu_read_lock();
++	retval = -ESRCH;
++	p = find_process_by_pid(pid);
++	if (p != NULL)
++		retval = sched_setscheduler(p, policy, &lparam);
++	rcu_read_unlock();
++
++	return retval;
++}
++
++/**
++ * sys_sched_setscheduler - set/change the scheduler policy and RT priority
++ * @pid: the pid in question.
++ * @policy: new policy.
++ * @param: structure containing the new RT priority.
++ */
++asmlinkage long sys_sched_setscheduler(pid_t pid, int policy,
++				       struct sched_param __user *param)
++{
++	/* negative values for policy are not valid */
++	if (policy < 0)
++		return -EINVAL;
++
++	return do_sched_setscheduler(pid, policy, param);
++}
++
++/**
++ * sys_sched_setparam - set/change the RT priority of a thread
++ * @pid: the pid in question.
++ * @param: structure containing the new RT priority.
++ */
++SYSCALL_DEFINE2(sched_setparam, pid_t, pid, struct sched_param __user *, param)
++{
++	return do_sched_setscheduler(pid, -1, param);
++}
++
++/**
++ * sys_sched_getscheduler - get the policy (scheduling class) of a thread
++ * @pid: the pid in question.
++ */
++SYSCALL_DEFINE1(sched_getscheduler, pid_t, pid)
++{
++	struct task_struct *p;
++	int retval = -EINVAL;
++
++	if (pid < 0)
++		goto out_nounlock;
++
++	retval = -ESRCH;
++	read_lock(&tasklist_lock);
++	p = find_process_by_pid(pid);
++	if (p) {
++		retval = security_task_getscheduler(p);
++		if (!retval)
++			retval = p->policy;
++	}
++	read_unlock(&tasklist_lock);
++
++out_nounlock:
++	return retval;
++}
++
++/**
++ * sys_sched_getscheduler - get the RT priority of a thread
++ * @pid: the pid in question.
++ * @param: structure containing the RT priority.
++ */
++SYSCALL_DEFINE2(sched_getparam, pid_t, pid, struct sched_param __user *, param)
++{
++	struct sched_param lp;
++	struct task_struct *p;
++	int retval = -EINVAL;
++
++	if (!param || pid < 0)
++		goto out_nounlock;
++
++	read_lock(&tasklist_lock);
++	p = find_process_by_pid(pid);
++	retval = -ESRCH;
++	if (!p)
++		goto out_unlock;
++
++	retval = security_task_getscheduler(p);
++	if (retval)
++		goto out_unlock;
++
++	lp.sched_priority = p->rt_priority;
++	read_unlock(&tasklist_lock);
++
++	/*
++	 * This one might sleep, we cannot do it with a spinlock held ...
++	 */
++	retval = copy_to_user(param, &lp, sizeof(*param)) ? -EFAULT : 0;
++
++out_nounlock:
++	return retval;
++
++out_unlock:
++	read_unlock(&tasklist_lock);
++	return retval;
++}
++
++long sched_setaffinity(pid_t pid, const struct cpumask *in_mask)
++{
++	cpumask_var_t cpus_allowed, new_mask;
++	struct task_struct *p;
++	int retval;
++
++	get_online_cpus();
++	read_lock(&tasklist_lock);
++
++	p = find_process_by_pid(pid);
++	if (!p) {
++		read_unlock(&tasklist_lock);
++		put_online_cpus();
++		return -ESRCH;
++	}
++
++	/*
++	 * It is not safe to call set_cpus_allowed with the
++	 * tasklist_lock held. We will bump the task_struct's
++	 * usage count and then drop tasklist_lock.
++	 */
++	get_task_struct(p);
++	read_unlock(&tasklist_lock);
++
++	if (!alloc_cpumask_var(&cpus_allowed, GFP_KERNEL)) {
++		retval = -ENOMEM;
++		goto out_put_task;
++	}
++	if (!alloc_cpumask_var(&new_mask, GFP_KERNEL)) {
++		retval = -ENOMEM;
++		goto out_free_cpus_allowed;
++	}
++	retval = -EPERM;
++	if (!check_same_owner(p) && !capable(CAP_SYS_NICE))
++		goto out_unlock;
++
++	retval = security_task_setscheduler(p, 0, NULL);
++	if (retval)
++		goto out_unlock;
++
++	cpuset_cpus_allowed(p, cpus_allowed);
++	cpumask_and(new_mask, in_mask, cpus_allowed);
++again:
++	retval = set_cpus_allowed_ptr(p, new_mask);
++
++	if (!retval) {
++		cpuset_cpus_allowed(p, cpus_allowed);
++		if (!cpumask_subset(new_mask, cpus_allowed)) {
++			/*
++			 * We must have raced with a concurrent cpuset
++			 * update. Just reset the cpus_allowed to the
++			 * cpuset's cpus_allowed
++			 */
++			cpumask_copy(new_mask, cpus_allowed);
++			goto again;
++		}
++	}
++out_unlock:
++	free_cpumask_var(new_mask);
++out_free_cpus_allowed:
++	free_cpumask_var(cpus_allowed);
++out_put_task:
++	put_task_struct(p);
++	put_online_cpus();
++	return retval;
++}
++
++static int get_user_cpu_mask(unsigned long __user *user_mask_ptr, unsigned len,
++			     cpumask_t *new_mask)
++{
++	if (len < sizeof(cpumask_t)) {
++		memset(new_mask, 0, sizeof(cpumask_t));
++	} else if (len > sizeof(cpumask_t)) {
++		len = sizeof(cpumask_t);
++	}
++	return copy_from_user(new_mask, user_mask_ptr, len) ? -EFAULT : 0;
++}
++
++
++/**
++ * sys_sched_setaffinity - set the cpu affinity of a process
++ * @pid: pid of the process
++ * @len: length in bytes of the bitmask pointed to by user_mask_ptr
++ * @user_mask_ptr: user-space pointer to the new cpu mask
++ */
++SYSCALL_DEFINE3(sched_setaffinity, pid_t, pid, unsigned int, len,
++		unsigned long __user *, user_mask_ptr)
++{
++	cpumask_var_t new_mask;
++	int retval;
++
++	if (!alloc_cpumask_var(&new_mask, GFP_KERNEL))
++		return -ENOMEM;
++
++	retval = get_user_cpu_mask(user_mask_ptr, len, new_mask);
++	if (retval == 0)
++		retval = sched_setaffinity(pid, new_mask);
++	free_cpumask_var(new_mask);
++	return retval;
++}
++
++long sched_getaffinity(pid_t pid, cpumask_t *mask)
++{
++	struct task_struct *p;
++	int retval;
++
++	mutex_lock(&sched_hotcpu_mutex);
++	read_lock(&tasklist_lock);
++
++	retval = -ESRCH;
++	p = find_process_by_pid(pid);
++	if (!p)
++		goto out_unlock;
++
++	retval = security_task_getscheduler(p);
++	if (retval)
++		goto out_unlock;
++
++	cpus_and(*mask, p->cpus_allowed, cpu_online_map);
++
++out_unlock:
++	read_unlock(&tasklist_lock);
++	mutex_unlock(&sched_hotcpu_mutex);
++	if (retval)
++		return retval;
++
++	return 0;
++}
++
++/**
++ * sys_sched_getaffinity - get the cpu affinity of a process
++ * @pid: pid of the process
++ * @len: length in bytes of the bitmask pointed to by user_mask_ptr
++ * @user_mask_ptr: user-space pointer to hold the current cpu mask
++ */
++SYSCALL_DEFINE3(sched_getaffinity, pid_t, pid, unsigned int, len,
++		unsigned long __user *, user_mask_ptr)
++{
++	int ret;
++	cpumask_var_t mask;
++
++	if (len < cpumask_size())
++		return -EINVAL;
++
++	if (!alloc_cpumask_var(&mask, GFP_KERNEL))
++		return -ENOMEM;
++
++	ret = sched_getaffinity(pid, mask);
++	if (ret == 0) {
++		if (copy_to_user(user_mask_ptr, mask, cpumask_size()))
++			ret = -EFAULT;
++		else
++			ret = cpumask_size();
++	}
++	free_cpumask_var(mask);
++
++	return ret;
++}
++
++/**
++ * sys_sched_yield - yield the current processor to other threads.
++ *
++ * This function yields the current CPU to other tasks. It does this by
++ * refilling the timeslice, resetting the deadline and scheduling away.
++ */
++SYSCALL_DEFINE0(sched_yield)
++{
++	struct task_struct *p;
++
++	grq_lock_irq();
++	p = current;
++	schedstat_inc(this_rq(), yld_count);
++	update_rq_clock(task_rq(p));
++	time_slice_expired(p);
++	requeue_task(p);
++
++	/*
++	 * Since we are going to call schedule() anyway, there's
++	 * no need to preempt or enable interrupts:
++	 */
++	__release(grq.lock);
++	spin_release(&grq.lock.dep_map, 1, _THIS_IP_);
++	_raw_spin_unlock(&grq.lock);
++	preempt_enable_no_resched();
++
++	schedule();
++
++	return 0;
++}
++
++static inline int should_resched(void)
++{
++	return need_resched() && !(preempt_count() & PREEMPT_ACTIVE);
++}
++
++static void __cond_resched(void)
++{
++#ifdef CONFIG_DEBUG_SPINLOCK_SLEEP
++	__might_sleep(__FILE__, __LINE__);
++#endif
++	/*
++	 * The BKS might be reacquired before we have dropped
++	 * PREEMPT_ACTIVE, which could trigger a second
++	 * cond_resched() call.
++	 */
++	do {
++		add_preempt_count(PREEMPT_ACTIVE);
++		schedule();
++		sub_preempt_count(PREEMPT_ACTIVE);
++	} while (need_resched());
++}
++
++int __sched _cond_resched(void)
++{
++	if (should_resched()) {
++		__cond_resched();
++		return 1;
++	}
++	return 0;
++}
++EXPORT_SYMBOL(_cond_resched);
++
++/*
++ * cond_resched_lock() - if a reschedule is pending, drop the given lock,
++ * call schedule, and on return reacquire the lock.
++ *
++ * This works OK both with and without CONFIG_PREEMPT.  We do strange low-level
++ * operations here to prevent schedule() from being called twice (once via
++ * spin_unlock(), once by hand).
++ */
++int cond_resched_lock(spinlock_t *lock)
++{
++	int resched = should_resched();
++	int ret = 0;
++
++	if (spin_needbreak(lock) || resched) {
++		spin_unlock(lock);
++		if (resched)
++			__cond_resched();
++		else
++			cpu_relax();
++		ret = 1;
++		spin_lock(lock);
++	}
++	return ret;
++}
++EXPORT_SYMBOL(cond_resched_lock);
++
++int __sched cond_resched_softirq(void)
++{
++	BUG_ON(!in_softirq());
++
++	if (should_resched()) {
++		local_bh_enable();
++		__cond_resched();
++		local_bh_disable();
++		return 1;
++	}
++	return 0;
++}
++EXPORT_SYMBOL(cond_resched_softirq);
++
++/**
++ * yield - yield the current processor to other threads.
++ *
++ * This is a shortcut for kernel-space yielding - it marks the
++ * thread runnable and calls sys_sched_yield().
++ */
++void __sched yield(void)
++{
++	set_current_state(TASK_RUNNING);
++	sys_sched_yield();
++}
++EXPORT_SYMBOL(yield);
++
++/*
++ * This task is about to go to sleep on IO.  Increment rq->nr_iowait so
++ * that process accounting knows that this is a task in IO wait state.
++ *
++ * But don't do that if it is a deliberate, throttling IO wait (this task
++ * has set its backing_dev_info: the queue against which it should throttle)
++ */
++void __sched io_schedule(void)
++{
++	struct rq *rq = &__raw_get_cpu_var(runqueues);
++
++	delayacct_blkio_start();
++	atomic_inc(&rq->nr_iowait);
++	schedule();
++	atomic_dec(&rq->nr_iowait);
++	delayacct_blkio_end();
++}
++EXPORT_SYMBOL(io_schedule);
++
++long __sched io_schedule_timeout(long timeout)
++{
++	struct rq *rq = &__raw_get_cpu_var(runqueues);
++	long ret;
++
++	delayacct_blkio_start();
++	atomic_inc(&rq->nr_iowait);
++	ret = schedule_timeout(timeout);
++	atomic_dec(&rq->nr_iowait);
++	delayacct_blkio_end();
++	return ret;
++}
++
++/**
++ * sys_sched_get_priority_max - return maximum RT priority.
++ * @policy: scheduling class.
++ *
++ * this syscall returns the maximum rt_priority that can be used
++ * by a given scheduling class.
++ */
++SYSCALL_DEFINE1(sched_get_priority_max, int, policy)
++{
++	int ret = -EINVAL;
++
++	switch (policy) {
++	case SCHED_FIFO:
++	case SCHED_RR:
++		ret = MAX_USER_RT_PRIO-1;
++		break;
++	case SCHED_NORMAL:
++	case SCHED_BATCH:
++	case SCHED_ISO:
++	case SCHED_IDLE:
++		ret = 0;
++		break;
++	}
++	return ret;
++}
++
++/**
++ * sys_sched_get_priority_min - return minimum RT priority.
++ * @policy: scheduling class.
++ *
++ * this syscall returns the minimum rt_priority that can be used
++ * by a given scheduling class.
++ */
++SYSCALL_DEFINE1(sched_get_priority_min, int, policy)
++{
++	int ret = -EINVAL;
++
++	switch (policy) {
++	case SCHED_FIFO:
++	case SCHED_RR:
++		ret = 1;
++		break;
++	case SCHED_NORMAL:
++	case SCHED_BATCH:
++	case SCHED_ISO:
++	case SCHED_IDLE:
++		ret = 0;
++		break;
++	}
++	return ret;
++}
++
++/**
++ * sys_sched_rr_get_interval - return the default timeslice of a process.
++ * @pid: pid of the process.
++ * @interval: userspace pointer to the timeslice value.
++ *
++ * this syscall writes the default timeslice value of a given process
++ * into the user-space timespec buffer. A value of '0' means infinity.
++ */
++SYSCALL_DEFINE2(sched_rr_get_interval, pid_t, pid,
++		struct timespec __user *, interval)
++{
++	struct task_struct *p;
++	int retval = -EINVAL;
++	struct timespec t;
++
++	if (pid < 0)
++		goto out_nounlock;
++
++	retval = -ESRCH;
++	read_lock(&tasklist_lock);
++	p = find_process_by_pid(pid);
++	if (!p)
++		goto out_unlock;
++
++	retval = security_task_getscheduler(p);
++	if (retval)
++		goto out_unlock;
++
++	t = ns_to_timespec(p->policy == SCHED_FIFO ? 0 :
++			   MS_TO_NS(task_timeslice(p)));
++	read_unlock(&tasklist_lock);
++	retval = copy_to_user(interval, &t, sizeof(t)) ? -EFAULT : 0;
++out_nounlock:
++	return retval;
++out_unlock:
++	read_unlock(&tasklist_lock);
++	return retval;
++}
++
++static const char stat_nam[] = TASK_STATE_TO_CHAR_STR;
++
++void sched_show_task(struct task_struct *p)
++{
++	unsigned long free = 0;
++	unsigned state;
++
++	state = p->state ? __ffs(p->state) + 1 : 0;
++	printk(KERN_INFO "%-13.13s %c", p->comm,
++		state < sizeof(stat_nam) - 1 ? stat_nam[state] : '?');
++#if BITS_PER_LONG == 32
++	if (state == TASK_RUNNING)
++		printk(KERN_CONT " running  ");
++	else
++		printk(KERN_CONT " %08lx ", thread_saved_pc(p));
++#else
++	if (state == TASK_RUNNING)
++		printk(KERN_CONT "  running task    ");
++	else
++		printk(KERN_CONT " %016lx ", thread_saved_pc(p));
++#endif
++#ifdef CONFIG_DEBUG_STACK_USAGE
++	free = stack_not_used(p);
++#endif
++	printk(KERN_CONT "%5lu %5d %6d 0x%08lx\n", free,
++		task_pid_nr(p), task_pid_nr(p->real_parent),
++		(unsigned long)task_thread_info(p)->flags);
++
++	show_stack(p, NULL);
++}
++
++void show_state_filter(unsigned long state_filter)
++{
++	struct task_struct *g, *p;
++
++#if BITS_PER_LONG == 32
++	printk(KERN_INFO
++		"  task                PC stack   pid father\n");
++#else
++	printk(KERN_INFO
++		"  task                        PC stack   pid father\n");
++#endif
++	read_lock(&tasklist_lock);
++	do_each_thread(g, p) {
++		/*
++		 * reset the NMI-timeout, listing all files on a slow
++		 * console might take alot of time:
++		 */
++		touch_nmi_watchdog();
++		if (!state_filter || (p->state & state_filter))
++			sched_show_task(p);
++	} while_each_thread(g, p);
++
++	touch_all_softlockup_watchdogs();
++
++	read_unlock(&tasklist_lock);
++	/*
++	 * Only show locks if all tasks are dumped:
++	 */
++	if (state_filter == -1)
++		debug_show_all_locks();
++}
++
++/**
++ * init_idle - set up an idle thread for a given CPU
++ * @idle: task in question
++ * @cpu: cpu the idle task belongs to
++ *
++ * NOTE: this function does not set the idle thread's NEED_RESCHED
++ * flag, to make booting more robust.
++ */
++void __cpuinit init_idle(struct task_struct *idle, int cpu)
++{
++	struct rq *rq = cpu_rq(cpu);
++	unsigned long flags;
++
++	time_grq_lock(rq, &flags);
++	idle->timestamp = idle->last_ran = rq->clock;
++	idle->state = TASK_RUNNING;
++	/* Setting prio to illegal value shouldn't matter when never queued */
++	idle->prio = rq->rq_prio = PRIO_LIMIT;
++	rq->rq_deadline = idle->deadline;
++	rq->rq_policy = idle->policy;
++	rq->rq_time_slice = idle->rt.time_slice;
++	idle->cpus_allowed = cpumask_of_cpu(cpu);
++	set_task_cpu(idle, cpu);
++	rq->curr = rq->idle = idle;
++	idle->oncpu = 1;
++	set_cpuidle_map(cpu);
++#ifdef CONFIG_HOTPLUG_CPU
++	idle->unplugged_mask = CPU_MASK_NONE;
++#endif
++	grq_unlock_irqrestore(&flags);
++
++	/* Set the preempt count _outside_ the spinlocks! */
++#if defined(CONFIG_PREEMPT) && !defined(CONFIG_PREEMPT_BKL)
++	task_thread_info(idle)->preempt_count = (idle->lock_depth >= 0);
++#else
++	task_thread_info(idle)->preempt_count = 0;
++#endif
++	ftrace_graph_init_task(idle);
++}
++
++/*
++ * In a system that switches off the HZ timer nohz_cpu_mask
++ * indicates which cpus entered this state. This is used
++ * in the rcu update to wait only for active cpus. For system
++ * which do not switch off the HZ timer nohz_cpu_mask should
++ * always be CPU_BITS_NONE.
++ */
++cpumask_var_t nohz_cpu_mask;
++
++#ifdef CONFIG_SMP
++#ifdef CONFIG_NO_HZ
++static struct {
++	atomic_t load_balancer;
++	cpumask_var_t cpu_mask;
++	cpumask_var_t ilb_grp_nohz_mask;
++} nohz ____cacheline_aligned = {
++	.load_balancer = ATOMIC_INIT(-1),
++};
++
++int get_nohz_load_balancer(void)
++{
++	return atomic_read(&nohz.load_balancer);
++}
++
++/*
++ * This routine will try to nominate the ilb (idle load balancing)
++ * owner among the cpus whose ticks are stopped. ilb owner will do the idle
++ * load balancing on behalf of all those cpus. If all the cpus in the system
++ * go into this tickless mode, then there will be no ilb owner (as there is
++ * no need for one) and all the cpus will sleep till the next wakeup event
++ * arrives...
++ *
++ * For the ilb owner, tick is not stopped. And this tick will be used
++ * for idle load balancing. ilb owner will still be part of
++ * nohz.cpu_mask..
++ *
++ * While stopping the tick, this cpu will become the ilb owner if there
++ * is no other owner. And will be the owner till that cpu becomes busy
++ * or if all cpus in the system stop their ticks at which point
++ * there is no need for ilb owner.
++ *
++ * When the ilb owner becomes busy, it nominates another owner, during the
++ * next busy scheduler_tick()
++ */
++int select_nohz_load_balancer(int stop_tick)
++{
++	int cpu = smp_processor_id();
++
++	if (stop_tick) {
++		cpu_rq(cpu)->in_nohz_recently = 1;
++
++		if (!cpu_active(cpu)) {
++			if (atomic_read(&nohz.load_balancer) != cpu)
++				return 0;
++
++			/*
++			 * If we are going offline and still the leader,
++			 * give up!
++			 */
++			if (atomic_cmpxchg(&nohz.load_balancer, cpu, -1) != cpu)
++				BUG();
++
++			return 0;
++		}
++
++		cpumask_set_cpu(cpu, nohz.cpu_mask);
++
++		/* time for ilb owner also to sleep */
++		if (cpumask_weight(nohz.cpu_mask) == num_online_cpus()) {
++			if (atomic_read(&nohz.load_balancer) == cpu)
++				atomic_set(&nohz.load_balancer, -1);
++			return 0;
++		}
++
++		if (atomic_read(&nohz.load_balancer) == -1) {
++			/* make me the ilb owner */
++			if (atomic_cmpxchg(&nohz.load_balancer, -1, cpu) == -1)
++				return 1;
++		} else if (atomic_read(&nohz.load_balancer) == cpu)
++			return 1;
++	} else {
++		if (!cpumask_test_cpu(cpu, nohz.cpu_mask))
++			return 0;
++
++		cpumask_clear_cpu(cpu, nohz.cpu_mask);
++
++		if (atomic_read(&nohz.load_balancer) == cpu)
++			if (atomic_cmpxchg(&nohz.load_balancer, cpu, -1) != cpu)
++				BUG();
++	}
++	return 0;
++}
++
++/*
++ * When add_timer_on() enqueues a timer into the timer wheel of an
++ * idle CPU then this timer might expire before the next timer event
++ * which is scheduled to wake up that CPU. In case of a completely
++ * idle system the next event might even be infinite time into the
++ * future. wake_up_idle_cpu() ensures that the CPU is woken up and
++ * leaves the inner idle loop so the newly added timer is taken into
++ * account when the CPU goes back to idle and evaluates the timer
++ * wheel for the next timer event.
++ */
++void wake_up_idle_cpu(int cpu)
++{
++	struct task_struct *idle;
++	struct rq *rq;
++
++	if (cpu == smp_processor_id())
++		return;
++
++	rq = cpu_rq(cpu);
++	idle = rq->idle;
++
++	/*
++	 * This is safe, as this function is called with the timer
++	 * wheel base lock of (cpu) held. When the CPU is on the way
++	 * to idle and has not yet set rq->curr to idle then it will
++	 * be serialized on the timer wheel base lock and take the new
++	 * timer into account automatically.
++	 */
++	if (unlikely(rq->curr != idle))
++		return;
++
++	/*
++	 * We can set TIF_RESCHED on the idle task of the other CPU
++	 * lockless. The worst case is that the other CPU runs the
++	 * idle task through an additional NOOP schedule()
++	 */
++	set_tsk_need_resched(idle);
++
++	/* NEED_RESCHED must be visible before we test polling */
++	smp_mb();
++	if (!tsk_is_polling(idle))
++		smp_send_reschedule(cpu);
++}
++
++#endif /* CONFIG_NO_HZ */
++
++/*
++ * Change a given task's CPU affinity. Migrate the thread to a
++ * proper CPU and schedule it away if the CPU it's executing on
++ * is removed from the allowed bitmask.
++ *
++ * NOTE: the caller must have a valid reference to the task, the
++ * task must not exit() & deallocate itself prematurely. The
++ * call is not atomic; no spinlocks may be held.
++ */
++int set_cpus_allowed_ptr(struct task_struct *p, const struct cpumask *new_mask)
++{
++	unsigned long flags;
++	int running = 0;
++	int queued = 0;
++	struct rq *rq;
++	int ret = 0;
++
++	rq = task_grq_lock(p, &flags);
++	if (!cpumask_intersects(new_mask, cpu_online_mask)) {
++		ret = -EINVAL;
++		goto out;
++	}
++
++	if (unlikely((p->flags & PF_THREAD_BOUND) && p != current &&
++		     !cpumask_equal(&p->cpus_allowed, new_mask))) {
++		ret = -EINVAL;
++		goto out;
++	}
++
++	queued = task_queued_only(p);
++
++	cpumask_copy(&p->cpus_allowed, new_mask);
++	p->rt.nr_cpus_allowed = cpumask_weight(new_mask);
++
++	/* Can the task run on the task's current CPU? If so, we're done */
++	if (cpumask_test_cpu(task_cpu(p), new_mask))
++		goto out;
++
++	/* Reschedule the task, schedule() will know if it can keep running */
++	if (task_running(p))
++		running = 1;
++	else
++		set_task_cpu(p, cpumask_any_and(cpu_online_mask, new_mask));
++
++out:
++	if (queued)
++		try_preempt(p);
++	task_grq_unlock(&flags);
++
++	/* This might be a flaky way of changing cpus! */
++	if (running)
++		schedule();
++	return ret;
++}
++EXPORT_SYMBOL_GPL(set_cpus_allowed_ptr);
++
++#ifdef CONFIG_HOTPLUG_CPU
++/* Schedules idle task to be the next runnable task on current CPU.
++ * It does so by boosting its priority to highest possible.
++ * Used by CPU offline code.
++ */
++void sched_idle_next(void)
++{
++	int this_cpu = smp_processor_id();
++	struct rq *rq = cpu_rq(this_cpu);
++	struct task_struct *idle = rq->idle;
++	unsigned long flags;
++
++	/* cpu has to be offline */
++	BUG_ON(cpu_online(this_cpu));
++
++	/*
++	 * Strictly not necessary since rest of the CPUs are stopped by now
++	 * and interrupts disabled on the current cpu.
++	 */
++	time_grq_lock(rq, &flags);
++
++	__setscheduler(idle, SCHED_FIFO, MAX_RT_PRIO - 1);
++
++	activate_idle_task(idle);
++	set_tsk_need_resched(rq->curr);
++
++	grq_unlock_irqrestore(&flags);
++}
++
++/*
++ * Ensures that the idle task is using init_mm right before its cpu goes
++ * offline.
++ */
++void idle_task_exit(void)
++{
++	struct mm_struct *mm = current->active_mm;
++
++	BUG_ON(cpu_online(smp_processor_id()));
++
++	if (mm != &init_mm)
++		switch_mm(mm, &init_mm, current);
++	mmdrop(mm);
++}
++
++#endif /* CONFIG_HOTPLUG_CPU */
++
++#if defined(CONFIG_SCHED_DEBUG) && defined(CONFIG_SYSCTL)
++
++static struct ctl_table sd_ctl_dir[] = {
++	{
++		.procname	= "sched_domain",
++		.mode		= 0555,
++	},
++	{0, },
++};
++
++static struct ctl_table sd_ctl_root[] = {
++	{
++		.ctl_name	= CTL_KERN,
++		.procname	= "kernel",
++		.mode		= 0555,
++		.child		= sd_ctl_dir,
++	},
++	{0, },
++};
++
++static struct ctl_table *sd_alloc_ctl_entry(int n)
++{
++	struct ctl_table *entry =
++		kcalloc(n, sizeof(struct ctl_table), GFP_KERNEL);
++
++	return entry;
++}
++
++static void sd_free_ctl_entry(struct ctl_table **tablep)
++{
++	struct ctl_table *entry;
++
++	/*
++	 * In the intermediate directories, both the child directory and
++	 * procname are dynamically allocated and could fail but the mode
++	 * will always be set. In the lowest directory the names are
++	 * static strings and all have proc handlers.
++	 */
++	for (entry = *tablep; entry->mode; entry++) {
++		if (entry->child)
++			sd_free_ctl_entry(&entry->child);
++		if (entry->proc_handler == NULL)
++			kfree(entry->procname);
++	}
++
++	kfree(*tablep);
++	*tablep = NULL;
++}
++
++static void
++set_table_entry(struct ctl_table *entry,
++		const char *procname, void *data, int maxlen,
++		mode_t mode, proc_handler *proc_handler)
++{
++	entry->procname = procname;
++	entry->data = data;
++	entry->maxlen = maxlen;
++	entry->mode = mode;
++	entry->proc_handler = proc_handler;
++}
++
++static struct ctl_table *
++sd_alloc_ctl_domain_table(struct sched_domain *sd)
++{
++	struct ctl_table *table = sd_alloc_ctl_entry(13);
++
++	if (table == NULL)
++		return NULL;
++
++	set_table_entry(&table[0], "min_interval", &sd->min_interval,
++		sizeof(long), 0644, proc_doulongvec_minmax);
++	set_table_entry(&table[1], "max_interval", &sd->max_interval,
++		sizeof(long), 0644, proc_doulongvec_minmax);
++	set_table_entry(&table[2], "busy_idx", &sd->busy_idx,
++		sizeof(int), 0644, proc_dointvec_minmax);
++	set_table_entry(&table[3], "idle_idx", &sd->idle_idx,
++		sizeof(int), 0644, proc_dointvec_minmax);
++	set_table_entry(&table[4], "newidle_idx", &sd->newidle_idx,
++		sizeof(int), 0644, proc_dointvec_minmax);
++	set_table_entry(&table[5], "wake_idx", &sd->wake_idx,
++		sizeof(int), 0644, proc_dointvec_minmax);
++	set_table_entry(&table[6], "forkexec_idx", &sd->forkexec_idx,
++		sizeof(int), 0644, proc_dointvec_minmax);
++	set_table_entry(&table[7], "busy_factor", &sd->busy_factor,
++		sizeof(int), 0644, proc_dointvec_minmax);
++	set_table_entry(&table[8], "imbalance_pct", &sd->imbalance_pct,
++		sizeof(int), 0644, proc_dointvec_minmax);
++	set_table_entry(&table[9], "cache_nice_tries",
++		&sd->cache_nice_tries,
++		sizeof(int), 0644, proc_dointvec_minmax);
++	set_table_entry(&table[10], "flags", &sd->flags,
++		sizeof(int), 0644, proc_dointvec_minmax);
++	set_table_entry(&table[11], "name", sd->name,
++		CORENAME_MAX_SIZE, 0444, proc_dostring);
++	/* &table[12] is terminator */
++
++	return table;
++}
++
++static ctl_table *sd_alloc_ctl_cpu_table(int cpu)
++{
++	struct ctl_table *entry, *table;
++	struct sched_domain *sd;
++	int domain_num = 0, i;
++	char buf[32];
++
++	for_each_domain(cpu, sd)
++		domain_num++;
++	entry = table = sd_alloc_ctl_entry(domain_num + 1);
++	if (table == NULL)
++		return NULL;
++
++	i = 0;
++	for_each_domain(cpu, sd) {
++		snprintf(buf, 32, "domain%d", i);
++		entry->procname = kstrdup(buf, GFP_KERNEL);
++		entry->mode = 0555;
++		entry->child = sd_alloc_ctl_domain_table(sd);
++		entry++;
++		i++;
++	}
++	return table;
++}
++
++static struct ctl_table_header *sd_sysctl_header;
++static void register_sched_domain_sysctl(void)
++{
++	int i, cpu_num = num_online_cpus();
++	struct ctl_table *entry = sd_alloc_ctl_entry(cpu_num + 1);
++	char buf[32];
++
++	WARN_ON(sd_ctl_dir[0].child);
++	sd_ctl_dir[0].child = entry;
++
++	if (entry == NULL)
++		return;
++
++	for_each_online_cpu(i) {
++		snprintf(buf, 32, "cpu%d", i);
++		entry->procname = kstrdup(buf, GFP_KERNEL);
++		entry->mode = 0555;
++		entry->child = sd_alloc_ctl_cpu_table(i);
++		entry++;
++	}
++
++	WARN_ON(sd_sysctl_header);
++	sd_sysctl_header = register_sysctl_table(sd_ctl_root);
++}
++
++/* may be called multiple times per register */
++static void unregister_sched_domain_sysctl(void)
++{
++	if (sd_sysctl_header)
++		unregister_sysctl_table(sd_sysctl_header);
++	sd_sysctl_header = NULL;
++	if (sd_ctl_dir[0].child)
++		sd_free_ctl_entry(&sd_ctl_dir[0].child);
++}
++#else
++static void register_sched_domain_sysctl(void)
++{
++}
++static void unregister_sched_domain_sysctl(void)
++{
++}
++#endif
++
++static void set_rq_online(struct rq *rq)
++{
++	if (!rq->online) {
++		cpumask_set_cpu(rq->cpu, rq->rd->online);
++		rq->online = 1;
++	}
++}
++
++static void set_rq_offline(struct rq *rq)
++{
++	if (rq->online) {
++		cpumask_clear_cpu(rq->cpu, rq->rd->online);
++		rq->online = 0;
++	}
++}
++
++#ifdef CONFIG_HOTPLUG_CPU
++/*
++ * This cpu is going down, so walk over the tasklist and find tasks that can
++ * only run on this cpu and remove their affinity. Store their value in
++ * unplugged_mask so it can be restored once their correct cpu is online. No
++ * need to do anything special since they'll just move on next reschedule if
++ * they're running.
++ */
++static void remove_cpu(unsigned long cpu)
++{
++	struct task_struct *p, *t;
++
++	read_lock(&tasklist_lock);
++
++	do_each_thread(t, p) {
++		cpumask_t cpus_remaining;
++
++		cpus_and(cpus_remaining, p->cpus_allowed, cpu_online_map);
++		cpu_clear(cpu, cpus_remaining);
++		if (cpus_empty(cpus_remaining)) {
++			p->unplugged_mask = p->cpus_allowed;
++			p->cpus_allowed = cpu_possible_map;
++		}
++	} while_each_thread(t, p);
++
++	read_unlock(&tasklist_lock);
++}
++
++/*
++ * This cpu is coming up so add it to the cpus_allowed.
++ */
++static void add_cpu(unsigned long cpu)
++{
++	struct task_struct *p, *t;
++
++	read_lock(&tasklist_lock);
++
++	do_each_thread(t, p) {
++		/* Have we taken all the cpus from the unplugged_mask back */
++		if (cpus_empty(p->unplugged_mask))
++			continue;
++
++		/* Was this cpu in the unplugged_mask mask */
++		if (cpu_isset(cpu, p->unplugged_mask)) {
++			cpu_set(cpu, p->cpus_allowed);
++			if (cpus_subset(p->unplugged_mask, p->cpus_allowed)) {
++				/*
++				 * Have we set more than the unplugged_mask?
++				 * If so, that means we have remnants set from
++				 * the unplug/plug cycle and need to remove
++				 * them. Then clear the unplugged_mask as we've
++				 * set all the cpus back.
++				 */
++				p->cpus_allowed = p->unplugged_mask;
++				cpus_clear(p->unplugged_mask);
++			}
++		}
++	} while_each_thread(t, p);
++
++	read_unlock(&tasklist_lock);
++}
++#else
++static void add_cpu(unsigned long cpu)
++{
++}
++#endif
++
++/*
++ * migration_call - callback that gets triggered when a CPU is added.
++ */
++static int __cpuinit
++migration_call(struct notifier_block *nfb, unsigned long action, void *hcpu)
++{
++	int cpu = (long)hcpu;
++	unsigned long flags;
++	struct rq *rq;
++
++	switch (action) {
++
++	case CPU_UP_PREPARE:
++	case CPU_UP_PREPARE_FROZEN:
++		break;
++
++	case CPU_ONLINE:
++	case CPU_ONLINE_FROZEN:
++		/* Update our root-domain */
++		rq = cpu_rq(cpu);
++		grq_lock_irqsave(&flags);
++		if (rq->rd) {
++			BUG_ON(!cpumask_test_cpu(cpu, rq->rd->span));
++
++			set_rq_online(rq);
++		}
++		add_cpu(cpu);
++		grq_unlock_irqrestore(&flags);
++		break;
++
++#ifdef CONFIG_HOTPLUG_CPU
++	case CPU_UP_CANCELED:
++	case CPU_UP_CANCELED_FROZEN:
++		break;
++
++	case CPU_DEAD:
++	case CPU_DEAD_FROZEN:
++		cpuset_lock(); /* around calls to cpuset_cpus_allowed_lock() */
++		rq = cpu_rq(cpu);
++		/* Idle task back to normal (off runqueue, low prio) */
++		grq_lock_irq();
++		remove_cpu(cpu);
++		deactivate_task(rq->idle);
++		rq->idle->static_prio = MAX_PRIO;
++		__setscheduler(rq->idle, SCHED_NORMAL, 0);
++		rq->idle->prio = PRIO_LIMIT;
++		update_rq_clock(rq);
++		grq_unlock_irq();
++		cpuset_unlock();
++		break;
++
++	case CPU_DYING:
++	case CPU_DYING_FROZEN:
++		rq = cpu_rq(cpu);
++		grq_lock_irqsave(&flags);
++		if (rq->rd) {
++			BUG_ON(!cpumask_test_cpu(cpu, rq->rd->span));
++			set_rq_offline(rq);
++		}
++		grq_unlock_irqrestore(&flags);
++		break;
++#endif
++	}
++	return NOTIFY_OK;
++}
++
++/*
++ * Register at high priority so that task migration (migrate_all_tasks)
++ * happens before everything else.  This has to be lower priority than
++ * the notifier in the perf_counter subsystem, though.
++ */
++static struct notifier_block __cpuinitdata migration_notifier = {
++	.notifier_call = migration_call,
++	.priority = 10
++};
++
++int __init migration_init(void)
++{
++	void *cpu = (void *)(long)smp_processor_id();
++	int err;
++
++	/* Start one for the boot CPU: */
++	err = migration_call(&migration_notifier, CPU_UP_PREPARE, cpu);
++	BUG_ON(err == NOTIFY_BAD);
++	migration_call(&migration_notifier, CPU_ONLINE, cpu);
++	register_cpu_notifier(&migration_notifier);
++
++	return 0;
++}
++early_initcall(migration_init);
++#endif
++
++/*
++ * sched_domains_mutex serializes calls to arch_init_sched_domains,
++ * detach_destroy_domains and partition_sched_domains.
++ */
++static DEFINE_MUTEX(sched_domains_mutex);
++
++#ifdef CONFIG_SMP
++
++#ifdef CONFIG_SCHED_DEBUG
++
++static int sched_domain_debug_one(struct sched_domain *sd, int cpu, int level,
++				  struct cpumask *groupmask)
++{
++	struct sched_group *group = sd->groups;
++	char str[256];
++
++	cpulist_scnprintf(str, sizeof(str), sched_domain_span(sd));
++	cpumask_clear(groupmask);
++
++	printk(KERN_DEBUG "%*s domain %d: ", level, "", level);
++
++	if (!(sd->flags & SD_LOAD_BALANCE)) {
++		printk("does not load-balance\n");
++		if (sd->parent)
++			printk(KERN_ERR "ERROR: !SD_LOAD_BALANCE domain"
++					" has parent");
++		return -1;
++	}
++
++	printk(KERN_CONT "span %s level %s\n", str, sd->name);
++
++	if (!cpumask_test_cpu(cpu, sched_domain_span(sd))) {
++		printk(KERN_ERR "ERROR: domain->span does not contain "
++				"CPU%d\n", cpu);
++	}
++	if (!cpumask_test_cpu(cpu, sched_group_cpus(group))) {
++		printk(KERN_ERR "ERROR: domain->groups does not contain"
++				" CPU%d\n", cpu);
++	}
++
++	printk(KERN_DEBUG "%*s groups:", level + 1, "");
++	do {
++		if (!group) {
++			printk("\n");
++			printk(KERN_ERR "ERROR: group is NULL\n");
++			break;
++		}
++
++		if (!group->__cpu_power) {
++			printk(KERN_CONT "\n");
++			printk(KERN_ERR "ERROR: domain->cpu_power not "
++					"set\n");
++			break;
++		}
++
++		if (!cpumask_weight(sched_group_cpus(group))) {
++			printk(KERN_CONT "\n");
++			printk(KERN_ERR "ERROR: empty group\n");
++			break;
++		}
++
++		if (cpumask_intersects(groupmask, sched_group_cpus(group))) {
++			printk(KERN_CONT "\n");
++			printk(KERN_ERR "ERROR: repeated CPUs\n");
++			break;
++		}
++
++		cpumask_or(groupmask, groupmask, sched_group_cpus(group));
++
++		cpulist_scnprintf(str, sizeof(str), sched_group_cpus(group));
++
++		printk(KERN_CONT " %s", str);
++		if (group->__cpu_power != SCHED_LOAD_SCALE) {
++			printk(KERN_CONT " (__cpu_power = %d)",
++				group->__cpu_power);
++		}
++
++		group = group->next;
++	} while (group != sd->groups);
++	printk(KERN_CONT "\n");
++
++	if (!cpumask_equal(sched_domain_span(sd), groupmask))
++		printk(KERN_ERR "ERROR: groups don't span domain->span\n");
++
++	if (sd->parent &&
++	    !cpumask_subset(groupmask, sched_domain_span(sd->parent)))
++		printk(KERN_ERR "ERROR: parent span is not a superset "
++			"of domain->span\n");
++	return 0;
++}
++
++static void sched_domain_debug(struct sched_domain *sd, int cpu)
++{
++	cpumask_var_t groupmask;
++	int level = 0;
++
++	if (!sd) {
++		printk(KERN_DEBUG "CPU%d attaching NULL sched-domain.\n", cpu);
++		return;
++	}
++
++	printk(KERN_DEBUG "CPU%d attaching sched-domain:\n", cpu);
++
++	if (!alloc_cpumask_var(&groupmask, GFP_KERNEL)) {
++		printk(KERN_DEBUG "Cannot load-balance (out of memory)\n");
++		return;
++	}
++
++	for (;;) {
++		if (sched_domain_debug_one(sd, cpu, level, groupmask))
++			break;
++		level++;
++		sd = sd->parent;
++		if (!sd)
++			break;
++	}
++	free_cpumask_var(groupmask);
++}
++#else /* !CONFIG_SCHED_DEBUG */
++# define sched_domain_debug(sd, cpu) do { } while (0)
++#endif /* CONFIG_SCHED_DEBUG */
++
++static int sd_degenerate(struct sched_domain *sd)
++{
++	if (cpumask_weight(sched_domain_span(sd)) == 1)
++		return 1;
++
++	/* Following flags need at least 2 groups */
++	if (sd->flags & (SD_LOAD_BALANCE |
++			 SD_BALANCE_NEWIDLE |
++			 SD_BALANCE_FORK |
++			 SD_BALANCE_EXEC |
++			 SD_SHARE_CPUPOWER |
++			 SD_SHARE_PKG_RESOURCES)) {
++		if (sd->groups != sd->groups->next)
++			return 0;
++	}
++
++	/* Following flags don't use groups */
++	if (sd->flags & (SD_WAKE_IDLE |
++			 SD_WAKE_AFFINE |
++			 SD_WAKE_BALANCE))
++		return 0;
++
++	return 1;
++}
++
++static int
++sd_parent_degenerate(struct sched_domain *sd, struct sched_domain *parent)
++{
++	unsigned long cflags = sd->flags, pflags = parent->flags;
++
++	if (sd_degenerate(parent))
++		return 1;
++
++	if (!cpumask_equal(sched_domain_span(sd), sched_domain_span(parent)))
++		return 0;
++
++	/* Does parent contain flags not in child? */
++	/* WAKE_BALANCE is a subset of WAKE_AFFINE */
++	if (cflags & SD_WAKE_AFFINE)
++		pflags &= ~SD_WAKE_BALANCE;
++	/* Flags needing groups don't count if only 1 group in parent */
++	if (parent->groups == parent->groups->next) {
++		pflags &= ~(SD_LOAD_BALANCE |
++				SD_BALANCE_NEWIDLE |
++				SD_BALANCE_FORK |
++				SD_BALANCE_EXEC |
++				SD_SHARE_CPUPOWER |
++				SD_SHARE_PKG_RESOURCES);
++		if (nr_node_ids == 1)
++			pflags &= ~SD_SERIALIZE;
++	}
++	if (~cflags & pflags)
++		return 0;
++
++	return 1;
++}
++
++static void free_rootdomain(struct root_domain *rd)
++{
++	free_cpumask_var(rd->rto_mask);
++	free_cpumask_var(rd->online);
++	free_cpumask_var(rd->span);
++	kfree(rd);
++}
++
++static void rq_attach_root(struct rq *rq, struct root_domain *rd)
++{
++	struct root_domain *old_rd = NULL;
++	unsigned long flags;
++
++	grq_lock_irqsave(&flags);
++
++	if (rq->rd) {
++		old_rd = rq->rd;
++
++		if (cpumask_test_cpu(rq->cpu, old_rd->online))
++			set_rq_offline(rq);
++
++		cpumask_clear_cpu(rq->cpu, old_rd->span);
++
++		/*
++		 * If we dont want to free the old_rt yet then
++		 * set old_rd to NULL to skip the freeing later
++		 * in this function:
++		 */
++		if (!atomic_dec_and_test(&old_rd->refcount))
++			old_rd = NULL;
++	}
++
++	atomic_inc(&rd->refcount);
++	rq->rd = rd;
++
++	cpumask_set_cpu(rq->cpu, rd->span);
++	if (cpumask_test_cpu(rq->cpu, cpu_online_mask))
++		set_rq_online(rq);
++
++	grq_unlock_irqrestore(&flags);
++
++	if (old_rd)
++		free_rootdomain(old_rd);
++}
++
++static int init_rootdomain(struct root_domain *rd, bool bootmem)
++{
++	gfp_t gfp = GFP_KERNEL;
++
++	memset(rd, 0, sizeof(*rd));
++
++	if (bootmem)
++		gfp = GFP_NOWAIT;
++
++	if (!alloc_cpumask_var(&rd->span, gfp))
++		goto out;
++	if (!alloc_cpumask_var(&rd->online, gfp))
++		goto free_span;
++	if (!alloc_cpumask_var(&rd->rto_mask, gfp))
++		goto free_online;
++
++	return 0;
++
++free_online:
++	free_cpumask_var(rd->online);
++free_span:
++	free_cpumask_var(rd->span);
++out:
++	return -ENOMEM;
++}
++
++static void init_defrootdomain(void)
++{
++	init_rootdomain(&def_root_domain, true);
++
++	atomic_set(&def_root_domain.refcount, 1);
++}
++
++static struct root_domain *alloc_rootdomain(void)
++{
++	struct root_domain *rd;
++
++	rd = kmalloc(sizeof(*rd), GFP_KERNEL);
++	if (!rd)
++		return NULL;
++
++	if (init_rootdomain(rd, false) != 0) {
++		kfree(rd);
++		return NULL;
++	}
++
++	return rd;
++}
++
++/*
++ * Attach the domain 'sd' to 'cpu' as its base domain. Callers must
++ * hold the hotplug lock.
++ */
++static void
++cpu_attach_domain(struct sched_domain *sd, struct root_domain *rd, int cpu)
++{
++	struct rq *rq = cpu_rq(cpu);
++	struct sched_domain *tmp;
++
++	/* Remove the sched domains which do not contribute to scheduling. */
++	for (tmp = sd; tmp; ) {
++		struct sched_domain *parent = tmp->parent;
++		if (!parent)
++			break;
++
++		if (sd_parent_degenerate(tmp, parent)) {
++			tmp->parent = parent->parent;
++			if (parent->parent)
++				parent->parent->child = tmp;
++		} else
++			tmp = tmp->parent;
++	}
++
++	if (sd && sd_degenerate(sd)) {
++		sd = sd->parent;
++		if (sd)
++			sd->child = NULL;
++	}
++
++	sched_domain_debug(sd, cpu);
++
++	rq_attach_root(rq, rd);
++	rcu_assign_pointer(rq->sd, sd);
++}
++
++/* cpus with isolated domains */
++static cpumask_var_t cpu_isolated_map;
++
++/* Setup the mask of cpus configured for isolated domains */
++static int __init isolated_cpu_setup(char *str)
++{
++	cpulist_parse(str, cpu_isolated_map);
++	return 1;
++}
++
++__setup("isolcpus=", isolated_cpu_setup);
++
++/*
++ * init_sched_build_groups takes the cpumask we wish to span, and a pointer
++ * to a function which identifies what group(along with sched group) a CPU
++ * belongs to. The return value of group_fn must be a >= 0 and < nr_cpu_ids
++ * (due to the fact that we keep track of groups covered with a struct cpumask).
++ *
++ * init_sched_build_groups will build a circular linked list of the groups
++ * covered by the given span, and will set each group's ->cpumask correctly,
++ * and ->cpu_power to 0.
++ */
++static void
++init_sched_build_groups(const struct cpumask *span,
++			const struct cpumask *cpu_map,
++			int (*group_fn)(int cpu, const struct cpumask *cpu_map,
++					struct sched_group **sg,
++					struct cpumask *tmpmask),
++			struct cpumask *covered, struct cpumask *tmpmask)
++{
++	struct sched_group *first = NULL, *last = NULL;
++	int i;
++
++	cpumask_clear(covered);
++
++	for_each_cpu(i, span) {
++		struct sched_group *sg;
++		int group = group_fn(i, cpu_map, &sg, tmpmask);
++		int j;
++
++		if (cpumask_test_cpu(i, covered))
++			continue;
++
++		cpumask_clear(sched_group_cpus(sg));
++		sg->__cpu_power = 0;
++
++		for_each_cpu(j, span) {
++			if (group_fn(j, cpu_map, NULL, tmpmask) != group)
++				continue;
++
++			cpumask_set_cpu(j, covered);
++			cpumask_set_cpu(j, sched_group_cpus(sg));
++		}
++		if (!first)
++			first = sg;
++		if (last)
++			last->next = sg;
++		last = sg;
++	}
++	last->next = first;
++}
++
++#define SD_NODES_PER_DOMAIN 16
++
++#ifdef CONFIG_NUMA
++
++/**
++ * find_next_best_node - find the next node to include in a sched_domain
++ * @node: node whose sched_domain we're building
++ * @used_nodes: nodes already in the sched_domain
++ *
++ * Find the next node to include in a given scheduling domain. Simply
++ * finds the closest node not already in the @used_nodes map.
++ *
++ * Should use nodemask_t.
++ */
++static int find_next_best_node(int node, nodemask_t *used_nodes)
++{
++	int i, n, val, min_val, best_node = 0;
++
++	min_val = INT_MAX;
++
++	for (i = 0; i < nr_node_ids; i++) {
++		/* Start at @node */
++		n = (node + i) % nr_node_ids;
++
++		if (!nr_cpus_node(n))
++			continue;
++
++		/* Skip already used nodes */
++		if (node_isset(n, *used_nodes))
++			continue;
++
++		/* Simple min distance search */
++		val = node_distance(node, n);
++
++		if (val < min_val) {
++			min_val = val;
++			best_node = n;
++		}
++	}
++
++	node_set(best_node, *used_nodes);
++	return best_node;
++}
++
++/**
++ * sched_domain_node_span - get a cpumask for a node's sched_domain
++ * @node: node whose cpumask we're constructing
++ * @span: resulting cpumask
++ *
++ * Given a node, construct a good cpumask for its sched_domain to span. It
++ * should be one that prevents unnecessary balancing, but also spreads tasks
++ * out optimally.
++ */
++static void sched_domain_node_span(int node, struct cpumask *span)
++{
++	nodemask_t used_nodes;
++	int i;
++
++	cpumask_clear(span);
++	nodes_clear(used_nodes);
++
++	cpumask_or(span, span, cpumask_of_node(node));
++	node_set(node, used_nodes);
++
++	for (i = 1; i < SD_NODES_PER_DOMAIN; i++) {
++		int next_node = find_next_best_node(node, &used_nodes);
++
++		cpumask_or(span, span, cpumask_of_node(next_node));
++	}
++}
++#endif /* CONFIG_NUMA */
++
++int sched_smt_power_savings = 0, sched_mc_power_savings = 0;
++
++/*
++ * The cpus mask in sched_group and sched_domain hangs off the end.
++ *
++ * ( See the the comments in include/linux/sched.h:struct sched_group
++ *   and struct sched_domain. )
++ */
++struct static_sched_group {
++	struct sched_group sg;
++	DECLARE_BITMAP(cpus, CONFIG_NR_CPUS);
++};
++
++struct static_sched_domain {
++	struct sched_domain sd;
++	DECLARE_BITMAP(span, CONFIG_NR_CPUS);
++};
++
++/*
++ * SMT sched-domains:
++ */
++#ifdef CONFIG_SCHED_SMT
++static DEFINE_PER_CPU(struct static_sched_domain, cpu_domains);
++static DEFINE_PER_CPU(struct static_sched_group, sched_group_cpus);
++
++static int
++cpu_to_cpu_group(int cpu, const struct cpumask *cpu_map,
++		 struct sched_group **sg, struct cpumask *unused)
++{
++	if (sg)
++		*sg = &per_cpu(sched_group_cpus, cpu).sg;
++	return cpu;
++}
++#endif /* CONFIG_SCHED_SMT */
++
++/*
++ * multi-core sched-domains:
++ */
++#ifdef CONFIG_SCHED_MC
++static DEFINE_PER_CPU(struct static_sched_domain, core_domains);
++static DEFINE_PER_CPU(struct static_sched_group, sched_group_core);
++#endif /* CONFIG_SCHED_MC */
++
++#if defined(CONFIG_SCHED_MC) && defined(CONFIG_SCHED_SMT)
++static int
++cpu_to_core_group(int cpu, const struct cpumask *cpu_map,
++		  struct sched_group **sg, struct cpumask *mask)
++{
++	int group;
++
++	cpumask_and(mask, topology_thread_cpumask(cpu), cpu_map);
++	group = cpumask_first(mask);
++	if (sg)
++		*sg = &per_cpu(sched_group_core, group).sg;
++	return group;
++}
++#elif defined(CONFIG_SCHED_MC)
++static int
++cpu_to_core_group(int cpu, const struct cpumask *cpu_map,
++		  struct sched_group **sg, struct cpumask *unused)
++{
++	if (sg)
++		*sg = &per_cpu(sched_group_core, cpu).sg;
++	return cpu;
++}
++#endif
++
++static DEFINE_PER_CPU(struct static_sched_domain, phys_domains);
++static DEFINE_PER_CPU(struct static_sched_group, sched_group_phys);
++
++static int
++cpu_to_phys_group(int cpu, const struct cpumask *cpu_map,
++		  struct sched_group **sg, struct cpumask *mask)
++{
++	int group;
++#ifdef CONFIG_SCHED_MC
++	cpumask_and(mask, cpu_coregroup_mask(cpu), cpu_map);
++	group = cpumask_first(mask);
++#elif defined(CONFIG_SCHED_SMT)
++	cpumask_and(mask, topology_thread_cpumask(cpu), cpu_map);
++	group = cpumask_first(mask);
++#else
++	group = cpu;
++#endif
++	if (sg)
++		*sg = &per_cpu(sched_group_phys, group).sg;
++	return group;
++}
++
++/**
++ * group_first_cpu - Returns the first cpu in the cpumask of a sched_group.
++ * @group: The group whose first cpu is to be returned.
++ */
++static inline unsigned int group_first_cpu(struct sched_group *group)
++{
++	return cpumask_first(sched_group_cpus(group));
++}
++
++#ifdef CONFIG_NUMA
++/*
++ * The init_sched_build_groups can't handle what we want to do with node
++ * groups, so roll our own. Now each node has its own list of groups which
++ * gets dynamically allocated.
++ */
++static DEFINE_PER_CPU(struct static_sched_domain, node_domains);
++static struct sched_group ***sched_group_nodes_bycpu;
++
++static DEFINE_PER_CPU(struct static_sched_domain, allnodes_domains);
++static DEFINE_PER_CPU(struct static_sched_group, sched_group_allnodes);
++
++static int cpu_to_allnodes_group(int cpu, const struct cpumask *cpu_map,
++				 struct sched_group **sg,
++				 struct cpumask *nodemask)
++{
++	int group;
++
++	cpumask_and(nodemask, cpumask_of_node(cpu_to_node(cpu)), cpu_map);
++	group = cpumask_first(nodemask);
++
++	if (sg)
++		*sg = &per_cpu(sched_group_allnodes, group).sg;
++	return group;
++}
++
++static void init_numa_sched_groups_power(struct sched_group *group_head)
++{
++	struct sched_group *sg = group_head;
++	int j;
++
++	if (!sg)
++		return;
++	do {
++		for_each_cpu(j, sched_group_cpus(sg)) {
++			struct sched_domain *sd;
++
++			sd = &per_cpu(phys_domains, j).sd;
++			if (j != group_first_cpu(sd->groups)) {
++				/*
++				 * Only add "power" once for each
++				 * physical package.
++				 */
++				continue;
++			}
++
++			sg_inc_cpu_power(sg, sd->groups->__cpu_power);
++		}
++		sg = sg->next;
++	} while (sg != group_head);
++}
++#endif /* CONFIG_NUMA */
++
++#ifdef CONFIG_NUMA
++/* Free memory allocated for various sched_group structures */
++static void free_sched_groups(const struct cpumask *cpu_map,
++			      struct cpumask *nodemask)
++{
++	int cpu, i;
++
++	for_each_cpu(cpu, cpu_map) {
++		struct sched_group **sched_group_nodes
++			= sched_group_nodes_bycpu[cpu];
++
++		if (!sched_group_nodes)
++			continue;
++
++		for (i = 0; i < nr_node_ids; i++) {
++			struct sched_group *oldsg, *sg = sched_group_nodes[i];
++
++			cpumask_and(nodemask, cpumask_of_node(i), cpu_map);
++			if (cpumask_empty(nodemask))
++				continue;
++
++			if (sg == NULL)
++				continue;
++			sg = sg->next;
++next_sg:
++			oldsg = sg;
++			sg = sg->next;
++			kfree(oldsg);
++			if (oldsg != sched_group_nodes[i])
++				goto next_sg;
++		}
++		kfree(sched_group_nodes);
++		sched_group_nodes_bycpu[cpu] = NULL;
++	}
++}
++#else /* !CONFIG_NUMA */
++static void free_sched_groups(const struct cpumask *cpu_map,
++			      struct cpumask *nodemask)
++{
++}
++#endif /* CONFIG_NUMA */
++
++/*
++ * Initialize sched groups cpu_power.
++ *
++ * cpu_power indicates the capacity of sched group, which is used while
++ * distributing the load between different sched groups in a sched domain.
++ * Typically cpu_power for all the groups in a sched domain will be same unless
++ * there are asymmetries in the topology. If there are asymmetries, group
++ * having more cpu_power will pickup more load compared to the group having
++ * less cpu_power.
++ *
++ * cpu_power will be a multiple of SCHED_LOAD_SCALE. This multiple represents
++ * the maximum number of tasks a group can handle in the presence of other idle
++ * or lightly loaded groups in the same sched domain.
++ */
++static void init_sched_groups_power(int cpu, struct sched_domain *sd)
++{
++	struct sched_domain *child;
++	struct sched_group *group;
++
++	WARN_ON(!sd || !sd->groups);
++
++	if (cpu != group_first_cpu(sd->groups))
++		return;
++
++	child = sd->child;
++
++	sd->groups->__cpu_power = 0;
++
++	/*
++	 * For perf policy, if the groups in child domain share resources
++	 * (for example cores sharing some portions of the cache hierarchy
++	 * or SMT), then set this domain groups cpu_power such that each group
++	 * can handle only one task, when there are other idle groups in the
++	 * same sched domain.
++	 */
++	if (!child || (!(sd->flags & SD_POWERSAVINGS_BALANCE) &&
++		       (child->flags &
++			(SD_SHARE_CPUPOWER | SD_SHARE_PKG_RESOURCES)))) {
++		sg_inc_cpu_power(sd->groups, SCHED_LOAD_SCALE);
++		return;
++	}
++
++	/*
++	 * add cpu_power of each child group to this groups cpu_power
++	 */
++	group = child->groups;
++	do {
++		sg_inc_cpu_power(sd->groups, group->__cpu_power);
++		group = group->next;
++	} while (group != child->groups);
++}
++
++/*
++ * Initializers for schedule domains
++ * Non-inlined to reduce accumulated stack pressure in build_sched_domains()
++ */
++
++#ifdef CONFIG_SCHED_DEBUG
++# define SD_INIT_NAME(sd, type)		sd->name = #type
++#else
++# define SD_INIT_NAME(sd, type)		do { } while (0)
++#endif
++
++#define	SD_INIT(sd, type)	sd_init_##type(sd)
++
++#define SD_INIT_FUNC(type)	\
++static noinline void sd_init_##type(struct sched_domain *sd)	\
++{								\
++	memset(sd, 0, sizeof(*sd));				\
++	*sd = SD_##type##_INIT;					\
++	sd->level = SD_LV_##type;				\
++	SD_INIT_NAME(sd, type);					\
++}
++
++SD_INIT_FUNC(CPU)
++#ifdef CONFIG_NUMA
++ SD_INIT_FUNC(ALLNODES)
++ SD_INIT_FUNC(NODE)
++#endif
++#ifdef CONFIG_SCHED_SMT
++ SD_INIT_FUNC(SIBLING)
++#endif
++#ifdef CONFIG_SCHED_MC
++ SD_INIT_FUNC(MC)
++#endif
++
++static int default_relax_domain_level = -1;
++
++static int __init setup_relax_domain_level(char *str)
++{
++	unsigned long val;
++
++	val = simple_strtoul(str, NULL, 0);
++	if (val < SD_LV_MAX)
++		default_relax_domain_level = val;
++
++	return 1;
++}
++__setup("relax_domain_level=", setup_relax_domain_level);
++
++static void set_domain_attribute(struct sched_domain *sd,
++				 struct sched_domain_attr *attr)
++{
++	int request;
++
++	if (!attr || attr->relax_domain_level < 0) {
++		if (default_relax_domain_level < 0)
++			return;
++		else
++			request = default_relax_domain_level;
++	} else
++		request = attr->relax_domain_level;
++	if (request < sd->level) {
++		/* turn off idle balance on this domain */
++		sd->flags &= ~(SD_WAKE_IDLE|SD_BALANCE_NEWIDLE);
++	} else {
++		/* turn on idle balance on this domain */
++		sd->flags |= (SD_WAKE_IDLE_FAR|SD_BALANCE_NEWIDLE);
++	}
++}
++
++/*
++ * Build sched domains for a given set of cpus and attach the sched domains
++ * to the individual cpus
++ */
++static int __build_sched_domains(const struct cpumask *cpu_map,
++				 struct sched_domain_attr *attr)
++{
++	int i, err = -ENOMEM;
++	struct root_domain *rd;
++	cpumask_var_t nodemask, this_sibling_map, this_core_map, send_covered,
++		tmpmask;
++#ifdef CONFIG_NUMA
++	cpumask_var_t domainspan, covered, notcovered;
++	struct sched_group **sched_group_nodes = NULL;
++	int sd_allnodes = 0;
++
++	if (!alloc_cpumask_var(&domainspan, GFP_KERNEL))
++		goto out;
++	if (!alloc_cpumask_var(&covered, GFP_KERNEL))
++		goto free_domainspan;
++	if (!alloc_cpumask_var(&notcovered, GFP_KERNEL))
++		goto free_covered;
++#endif
++
++	if (!alloc_cpumask_var(&nodemask, GFP_KERNEL))
++		goto free_notcovered;
++	if (!alloc_cpumask_var(&this_sibling_map, GFP_KERNEL))
++		goto free_nodemask;
++	if (!alloc_cpumask_var(&this_core_map, GFP_KERNEL))
++		goto free_this_sibling_map;
++	if (!alloc_cpumask_var(&send_covered, GFP_KERNEL))
++		goto free_this_core_map;
++	if (!alloc_cpumask_var(&tmpmask, GFP_KERNEL))
++		goto free_send_covered;
++
++#ifdef CONFIG_NUMA
++	/*
++	 * Allocate the per-node list of sched groups
++	 */
++	sched_group_nodes = kcalloc(nr_node_ids, sizeof(struct sched_group *),
++				    GFP_KERNEL);
++	if (!sched_group_nodes) {
++		printk(KERN_WARNING "Can not alloc sched group node list\n");
++		goto free_tmpmask;
++	}
++#endif
++
++	rd = alloc_rootdomain();
++	if (!rd) {
++		printk(KERN_WARNING "Cannot alloc root domain\n");
++		goto free_sched_groups;
++	}
++
++#ifdef CONFIG_NUMA
++	sched_group_nodes_bycpu[cpumask_first(cpu_map)] = sched_group_nodes;
++#endif
++
++	/*
++	 * Set up domains for cpus specified by the cpu_map.
++	 */
++	for_each_cpu(i, cpu_map) {
++		struct sched_domain *sd = NULL, *p;
++
++		cpumask_and(nodemask, cpumask_of_node(cpu_to_node(i)), cpu_map);
++
++#ifdef CONFIG_NUMA
++		if (cpumask_weight(cpu_map) >
++				SD_NODES_PER_DOMAIN*cpumask_weight(nodemask)) {
++			sd = &per_cpu(allnodes_domains, i).sd;
++			SD_INIT(sd, ALLNODES);
++			set_domain_attribute(sd, attr);
++			cpumask_copy(sched_domain_span(sd), cpu_map);
++			cpu_to_allnodes_group(i, cpu_map, &sd->groups, tmpmask);
++			p = sd;
++			sd_allnodes = 1;
++		} else
++			p = NULL;
++
++		sd = &per_cpu(node_domains, i).sd;
++		SD_INIT(sd, NODE);
++		set_domain_attribute(sd, attr);
++		sched_domain_node_span(cpu_to_node(i), sched_domain_span(sd));
++		sd->parent = p;
++		if (p)
++			p->child = sd;
++		cpumask_and(sched_domain_span(sd),
++			    sched_domain_span(sd), cpu_map);
++#endif
++
++		p = sd;
++		sd = &per_cpu(phys_domains, i).sd;
++		SD_INIT(sd, CPU);
++		set_domain_attribute(sd, attr);
++		cpumask_copy(sched_domain_span(sd), nodemask);
++		sd->parent = p;
++		if (p)
++			p->child = sd;
++		cpu_to_phys_group(i, cpu_map, &sd->groups, tmpmask);
++
++#ifdef CONFIG_SCHED_MC
++		p = sd;
++		sd = &per_cpu(core_domains, i).sd;
++		SD_INIT(sd, MC);
++		set_domain_attribute(sd, attr);
++		cpumask_and(sched_domain_span(sd), cpu_map,
++						   cpu_coregroup_mask(i));
++		sd->parent = p;
++		p->child = sd;
++		cpu_to_core_group(i, cpu_map, &sd->groups, tmpmask);
++#endif
++
++#ifdef CONFIG_SCHED_SMT
++		p = sd;
++		sd = &per_cpu(cpu_domains, i).sd;
++		SD_INIT(sd, SIBLING);
++		set_domain_attribute(sd, attr);
++		cpumask_and(sched_domain_span(sd),
++			    topology_thread_cpumask(i), cpu_map);
++		sd->parent = p;
++		p->child = sd;
++		cpu_to_cpu_group(i, cpu_map, &sd->groups, tmpmask);
++#endif
++	}
++
++#ifdef CONFIG_SCHED_SMT
++	/* Set up CPU (sibling) groups */
++	for_each_cpu(i, cpu_map) {
++		cpumask_and(this_sibling_map,
++			    topology_thread_cpumask(i), cpu_map);
++		if (i != cpumask_first(this_sibling_map))
++			continue;
++
++		init_sched_build_groups(this_sibling_map, cpu_map,
++					&cpu_to_cpu_group,
++					send_covered, tmpmask);
++	}
++#endif
++
++#ifdef CONFIG_SCHED_MC
++	/* Set up multi-core groups */
++	for_each_cpu(i, cpu_map) {
++		cpumask_and(this_core_map, cpu_coregroup_mask(i), cpu_map);
++		if (i != cpumask_first(this_core_map))
++			continue;
++
++		init_sched_build_groups(this_core_map, cpu_map,
++					&cpu_to_core_group,
++					send_covered, tmpmask);
++	}
++#endif
++
++	/* Set up physical groups */
++	for (i = 0; i < nr_node_ids; i++) {
++		cpumask_and(nodemask, cpumask_of_node(i), cpu_map);
++		if (cpumask_empty(nodemask))
++			continue;
++
++		init_sched_build_groups(nodemask, cpu_map,
++					&cpu_to_phys_group,
++					send_covered, tmpmask);
++	}
++
++#ifdef CONFIG_NUMA
++	/* Set up node groups */
++	if (sd_allnodes) {
++		init_sched_build_groups(cpu_map, cpu_map,
++					&cpu_to_allnodes_group,
++					send_covered, tmpmask);
++	}
++
++	for (i = 0; i < nr_node_ids; i++) {
++		/* Set up node groups */
++		struct sched_group *sg, *prev;
++		int j;
++
++		cpumask_clear(covered);
++		cpumask_and(nodemask, cpumask_of_node(i), cpu_map);
++		if (cpumask_empty(nodemask)) {
++			sched_group_nodes[i] = NULL;
++			continue;
++		}
++
++		sched_domain_node_span(i, domainspan);
++		cpumask_and(domainspan, domainspan, cpu_map);
++
++		sg = kmalloc_node(sizeof(struct sched_group) + cpumask_size(),
++				  GFP_KERNEL, i);
++		if (!sg) {
++			printk(KERN_WARNING "Can not alloc domain group for "
++				"node %d\n", i);
++			goto error;
++		}
++		sched_group_nodes[i] = sg;
++		for_each_cpu(j, nodemask) {
++			struct sched_domain *sd;
++
++			sd = &per_cpu(node_domains, j).sd;
++			sd->groups = sg;
++		}
++		sg->__cpu_power = 0;
++		cpumask_copy(sched_group_cpus(sg), nodemask);
++		sg->next = sg;
++		cpumask_or(covered, covered, nodemask);
++		prev = sg;
++
++		for (j = 0; j < nr_node_ids; j++) {
++			int n = (i + j) % nr_node_ids;
++
++			cpumask_complement(notcovered, covered);
++			cpumask_and(tmpmask, notcovered, cpu_map);
++			cpumask_and(tmpmask, tmpmask, domainspan);
++			if (cpumask_empty(tmpmask))
++				break;
++
++			cpumask_and(tmpmask, tmpmask, cpumask_of_node(n));
++			if (cpumask_empty(tmpmask))
++				continue;
++
++			sg = kmalloc_node(sizeof(struct sched_group) +
++					  cpumask_size(),
++					  GFP_KERNEL, i);
++			if (!sg) {
++				printk(KERN_WARNING
++				"Can not alloc domain group for node %d\n", j);
++				goto error;
++			}
++			sg->__cpu_power = 0;
++			cpumask_copy(sched_group_cpus(sg), tmpmask);
++			sg->next = prev->next;
++			cpumask_or(covered, covered, tmpmask);
++			prev->next = sg;
++			prev = sg;
++		}
++	}
++#endif
++
++	/* Calculate CPU power for physical packages and nodes */
++#ifdef CONFIG_SCHED_SMT
++	for_each_cpu(i, cpu_map) {
++		struct sched_domain *sd = &per_cpu(cpu_domains, i).sd;
++
++		init_sched_groups_power(i, sd);
++	}
++#endif
++#ifdef CONFIG_SCHED_MC
++	for_each_cpu(i, cpu_map) {
++		struct sched_domain *sd = &per_cpu(core_domains, i).sd;
++
++		init_sched_groups_power(i, sd);
++	}
++#endif
++
++	for_each_cpu(i, cpu_map) {
++		struct sched_domain *sd = &per_cpu(phys_domains, i).sd;
++
++		init_sched_groups_power(i, sd);
++	}
++
++#ifdef CONFIG_NUMA
++	for (i = 0; i < nr_node_ids; i++)
++		init_numa_sched_groups_power(sched_group_nodes[i]);
++
++	if (sd_allnodes) {
++		struct sched_group *sg;
++
++		cpu_to_allnodes_group(cpumask_first(cpu_map), cpu_map, &sg,
++								tmpmask);
++		init_numa_sched_groups_power(sg);
++	}
++#endif
++
++	/* Attach the domains */
++	for_each_cpu(i, cpu_map) {
++		struct sched_domain *sd;
++#ifdef CONFIG_SCHED_SMT
++		sd = &per_cpu(cpu_domains, i).sd;
++#elif defined(CONFIG_SCHED_MC)
++		sd = &per_cpu(core_domains, i).sd;
++#else
++		sd = &per_cpu(phys_domains, i).sd;
++#endif
++		cpu_attach_domain(sd, rd, i);
++	}
++
++	err = 0;
++
++free_tmpmask:
++	free_cpumask_var(tmpmask);
++free_send_covered:
++	free_cpumask_var(send_covered);
++free_this_core_map:
++	free_cpumask_var(this_core_map);
++free_this_sibling_map:
++	free_cpumask_var(this_sibling_map);
++free_nodemask:
++	free_cpumask_var(nodemask);
++free_notcovered:
++#ifdef CONFIG_NUMA
++	free_cpumask_var(notcovered);
++free_covered:
++	free_cpumask_var(covered);
++free_domainspan:
++	free_cpumask_var(domainspan);
++out:
++#endif
++	return err;
++
++free_sched_groups:
++#ifdef CONFIG_NUMA
++	kfree(sched_group_nodes);
++#endif
++	goto free_tmpmask;
++
++#ifdef CONFIG_NUMA
++error:
++	free_sched_groups(cpu_map, tmpmask);
++	free_rootdomain(rd);
++	goto free_tmpmask;
++#endif
++}
++
++static int build_sched_domains(const struct cpumask *cpu_map)
++{
++	return __build_sched_domains(cpu_map, NULL);
++}
++
++static struct cpumask *doms_cur;	/* current sched domains */
++static int ndoms_cur;		/* number of sched domains in 'doms_cur' */
++static struct sched_domain_attr *dattr_cur;
++				/* attribues of custom domains in 'doms_cur' */
++
++/*
++ * Special case: If a kmalloc of a doms_cur partition (array of
++ * cpumask) fails, then fallback to a single sched domain,
++ * as determined by the single cpumask fallback_doms.
++ */
++static cpumask_var_t fallback_doms;
++
++/*
++ * arch_update_cpu_topology lets virtualized architectures update the
++ * cpu core maps. It is supposed to return 1 if the topology changed
++ * or 0 if it stayed the same.
++ */
++int __attribute__((weak)) arch_update_cpu_topology(void)
++{
++	return 0;
++}
++
++/*
++ * Set up scheduler domains and groups. Callers must hold the hotplug lock.
++ * For now this just excludes isolated cpus, but could be used to
++ * exclude other special cases in the future.
++ */
++static int arch_init_sched_domains(const struct cpumask *cpu_map)
++{
++	int err;
++
++	arch_update_cpu_topology();
++	ndoms_cur = 1;
++	doms_cur = kmalloc(cpumask_size(), GFP_KERNEL);
++	if (!doms_cur)
++		doms_cur = fallback_doms;
++	cpumask_andnot(doms_cur, cpu_map, cpu_isolated_map);
++	dattr_cur = NULL;
++	err = build_sched_domains(doms_cur);
++	register_sched_domain_sysctl();
++
++	return err;
++}
++
++static void arch_destroy_sched_domains(const struct cpumask *cpu_map,
++				       struct cpumask *tmpmask)
++{
++	free_sched_groups(cpu_map, tmpmask);
++}
++
++/*
++ * Detach sched domains from a group of cpus specified in cpu_map
++ * These cpus will now be attached to the NULL domain
++ */
++static void detach_destroy_domains(const struct cpumask *cpu_map)
++{
++	/* Save because hotplug lock held. */
++	static DECLARE_BITMAP(tmpmask, CONFIG_NR_CPUS);
++	int i;
++
++	for_each_cpu(i, cpu_map)
++		cpu_attach_domain(NULL, &def_root_domain, i);
++	synchronize_sched();
++	arch_destroy_sched_domains(cpu_map, to_cpumask(tmpmask));
++}
++
++/* handle null as "default" */
++static int dattrs_equal(struct sched_domain_attr *cur, int idx_cur,
++			struct sched_domain_attr *new, int idx_new)
++{
++	struct sched_domain_attr tmp;
++
++	/* fast path */
++	if (!new && !cur)
++		return 1;
++
++	tmp = SD_ATTR_INIT;
++	return !memcmp(cur ? (cur + idx_cur) : &tmp,
++			new ? (new + idx_new) : &tmp,
++			sizeof(struct sched_domain_attr));
++}
++
++/*
++ * Partition sched domains as specified by the 'ndoms_new'
++ * cpumasks in the array doms_new[] of cpumasks. This compares
++ * doms_new[] to the current sched domain partitioning, doms_cur[].
++ * It destroys each deleted domain and builds each new domain.
++ *
++ * 'doms_new' is an array of cpumask's of length 'ndoms_new'.
++ * The masks don't intersect (don't overlap.) We should setup one
++ * sched domain for each mask. CPUs not in any of the cpumasks will
++ * not be load balanced. If the same cpumask appears both in the
++ * current 'doms_cur' domains and in the new 'doms_new', we can leave
++ * it as it is.
++ *
++ * The passed in 'doms_new' should be kmalloc'd. This routine takes
++ * ownership of it and will kfree it when done with it. If the caller
++ * failed the kmalloc call, then it can pass in doms_new == NULL &&
++ * ndoms_new == 1, and partition_sched_domains() will fallback to
++ * the single partition 'fallback_doms', it also forces the domains
++ * to be rebuilt.
++ *
++ * If doms_new == NULL it will be replaced with cpu_online_mask.
++ * ndoms_new == 0 is a special case for destroying existing domains,
++ * and it will not create the default domain.
++ *
++ * Call with hotplug lock held
++ */
++/* FIXME: Change to struct cpumask *doms_new[] */
++void partition_sched_domains(int ndoms_new, struct cpumask *doms_new,
++			     struct sched_domain_attr *dattr_new)
++{
++	int i, j, n;
++	int new_topology;
++
++	mutex_lock(&sched_domains_mutex);
++
++	/* always unregister in case we don't destroy any domains */
++	unregister_sched_domain_sysctl();
++
++	/* Let architecture update cpu core mappings. */
++	new_topology = arch_update_cpu_topology();
++
++	n = doms_new ? ndoms_new : 0;
++
++	/* Destroy deleted domains */
++	for (i = 0; i < ndoms_cur; i++) {
++		for (j = 0; j < n && !new_topology; j++) {
++			if (cpumask_equal(&doms_cur[i], &doms_new[j])
++			    && dattrs_equal(dattr_cur, i, dattr_new, j))
++				goto match1;
++		}
++		/* no match - a current sched domain not in new doms_new[] */
++		detach_destroy_domains(doms_cur + i);
++match1:
++		;
++	}
++
++	if (doms_new == NULL) {
++		ndoms_cur = 0;
++		doms_new = fallback_doms;
++		cpumask_andnot(&doms_new[0], cpu_online_mask, cpu_isolated_map);
++		WARN_ON_ONCE(dattr_new);
++	}
++
++	/* Build new domains */
++	for (i = 0; i < ndoms_new; i++) {
++		for (j = 0; j < ndoms_cur && !new_topology; j++) {
++			if (cpumask_equal(&doms_new[i], &doms_cur[j])
++			    && dattrs_equal(dattr_new, i, dattr_cur, j))
++				goto match2;
++		}
++		/* no match - add a new doms_new */
++		__build_sched_domains(doms_new + i,
++					dattr_new ? dattr_new + i : NULL);
++match2:
++		;
++	}
++
++	/* Remember the new sched domains */
++	if (doms_cur != fallback_doms)
++		kfree(doms_cur);
++	kfree(dattr_cur);	/* kfree(NULL) is safe */
++	doms_cur = doms_new;
++	dattr_cur = dattr_new;
++	ndoms_cur = ndoms_new;
++
++	register_sched_domain_sysctl();
++
++	mutex_unlock(&sched_domains_mutex);
++}
++
++#if defined(CONFIG_SCHED_MC) || defined(CONFIG_SCHED_SMT)
++static void arch_reinit_sched_domains(void)
++{
++	get_online_cpus();
++
++	/* Destroy domains first to force the rebuild */
++	partition_sched_domains(0, NULL, NULL);
++
++	rebuild_sched_domains();
++	put_online_cpus();
++}
++
++static ssize_t sched_power_savings_store(const char *buf, size_t count, int smt)
++{
++	unsigned int level = 0;
++
++	if (sscanf(buf, "%u", &level) != 1)
++		return -EINVAL;
++
++	/*
++	 * level is always be positive so don't check for
++	 * level < POWERSAVINGS_BALANCE_NONE which is 0
++	 * What happens on 0 or 1 byte write,
++	 * need to check for count as well?
++	 */
++
++	if (level >= MAX_POWERSAVINGS_BALANCE_LEVELS)
++		return -EINVAL;
++
++	if (smt)
++		sched_smt_power_savings = level;
++	else
++		sched_mc_power_savings = level;
++
++	arch_reinit_sched_domains();
++
++	return count;
++}
++
++#ifdef CONFIG_SCHED_MC
++static ssize_t sched_mc_power_savings_show(struct sysdev_class *class,
++					   char *page)
++{
++	return sprintf(page, "%u\n", sched_mc_power_savings);
++}
++static ssize_t sched_mc_power_savings_store(struct sysdev_class *class,
++					    const char *buf, size_t count)
++{
++	return sched_power_savings_store(buf, count, 0);
++}
++static SYSDEV_CLASS_ATTR(sched_mc_power_savings, 0644,
++			 sched_mc_power_savings_show,
++			 sched_mc_power_savings_store);
++#endif
++
++#ifdef CONFIG_SCHED_SMT
++static ssize_t sched_smt_power_savings_show(struct sysdev_class *dev,
++					    char *page)
++{
++	return sprintf(page, "%u\n", sched_smt_power_savings);
++}
++static ssize_t sched_smt_power_savings_store(struct sysdev_class *dev,
++					     const char *buf, size_t count)
++{
++	return sched_power_savings_store(buf, count, 1);
++}
++static SYSDEV_CLASS_ATTR(sched_smt_power_savings, 0644,
++		   sched_smt_power_savings_show,
++		   sched_smt_power_savings_store);
++#endif
++
++int __init sched_create_sysfs_power_savings_entries(struct sysdev_class *cls)
++{
++	int err = 0;
++
++#ifdef CONFIG_SCHED_SMT
++	if (smt_capable())
++		err = sysfs_create_file(&cls->kset.kobj,
++					&attr_sched_smt_power_savings.attr);
++#endif
++#ifdef CONFIG_SCHED_MC
++	if (!err && mc_capable())
++		err = sysfs_create_file(&cls->kset.kobj,
++					&attr_sched_mc_power_savings.attr);
++#endif
++	return err;
++}
++#endif /* CONFIG_SCHED_MC || CONFIG_SCHED_SMT */
++
++#ifndef CONFIG_CPUSETS
++/*
++ * Add online and remove offline CPUs from the scheduler domains.
++ * When cpusets are enabled they take over this function.
++ */
++static int update_sched_domains(struct notifier_block *nfb,
++				unsigned long action, void *hcpu)
++{
++	switch (action) {
++	case CPU_ONLINE:
++	case CPU_ONLINE_FROZEN:
++	case CPU_DEAD:
++	case CPU_DEAD_FROZEN:
++		partition_sched_domains(1, NULL, NULL);
++		return NOTIFY_OK;
++
++	default:
++		return NOTIFY_DONE;
++	}
++}
++#endif
++
++static int update_runtime(struct notifier_block *nfb,
++				unsigned long action, void *hcpu)
++{
++	switch (action) {
++	case CPU_DOWN_PREPARE:
++	case CPU_DOWN_PREPARE_FROZEN:
++		return NOTIFY_OK;
++
++	case CPU_DOWN_FAILED:
++	case CPU_DOWN_FAILED_FROZEN:
++	case CPU_ONLINE:
++	case CPU_ONLINE_FROZEN:
++		return NOTIFY_OK;
++
++	default:
++		return NOTIFY_DONE;
++	}
++}
++
++void __init sched_init_smp(void)
++{
++	cpumask_var_t non_isolated_cpus;
++
++	alloc_cpumask_var(&non_isolated_cpus, GFP_KERNEL);
++
++#if defined(CONFIG_NUMA)
++	sched_group_nodes_bycpu = kzalloc(nr_cpu_ids * sizeof(void **),
++								GFP_KERNEL);
++	BUG_ON(sched_group_nodes_bycpu == NULL);
++#endif
++	get_online_cpus();
++	mutex_lock(&sched_domains_mutex);
++	arch_init_sched_domains(cpu_online_mask);
++	cpumask_andnot(non_isolated_cpus, cpu_possible_mask, cpu_isolated_map);
++	if (cpumask_empty(non_isolated_cpus))
++		cpumask_set_cpu(smp_processor_id(), non_isolated_cpus);
++	mutex_unlock(&sched_domains_mutex);
++	put_online_cpus();
++
++#ifndef CONFIG_CPUSETS
++	/* XXX: Theoretical race here - CPU may be hotplugged now */
++	hotcpu_notifier(update_sched_domains, 0);
++#endif
++
++	/* RT runtime code needs to handle some hotplug events */
++	hotcpu_notifier(update_runtime, 0);
++
++	/* Move init over to a non-isolated CPU */
++	if (set_cpus_allowed_ptr(current, non_isolated_cpus) < 0)
++		BUG();
++	free_cpumask_var(non_isolated_cpus);
++
++	alloc_cpumask_var(&fallback_doms, GFP_KERNEL);
++
++	/*
++	 * Assume that every added cpu gives us slightly less overall latency
++	 * allowing us to increase the base rr_interval, but in a non linear
++	 * fashion.
++	 */
++	rr_interval *= 1 + ilog2(num_online_cpus());
++}
++#else
++void __init sched_init_smp(void)
++{
++}
++#endif /* CONFIG_SMP */
++
++unsigned int sysctl_timer_migration = 1;
++
++int in_sched_functions(unsigned long addr)
++{
++	return in_lock_functions(addr) ||
++		(addr >= (unsigned long)__sched_text_start
++		&& addr < (unsigned long)__sched_text_end);
++}
++
++void __init sched_init(void)
++{
++	int i;
++	int highest_cpu = 0;
++
++	prio_ratios[0] = 100;
++	for (i = 1 ; i < PRIO_RANGE ; i++)
++		prio_ratios[i] = prio_ratios[i - 1] * 11 / 10;
++
++#ifdef CONFIG_SMP
++	init_defrootdomain();
++	cpus_clear(grq.cpu_idle_map);
++#endif
++	spin_lock_init(&grq.lock);
++	for_each_possible_cpu(i) {
++		struct rq *rq;
++
++		rq = cpu_rq(i);
++		INIT_LIST_HEAD(&rq->queue);
++		rq->rq_deadline = 0;
++		rq->rq_prio = 0;
++		rq->cpu = i;
++		rq->user_pc = rq->nice_pc = rq->softirq_pc = rq->system_pc =
++			      rq->iowait_pc = rq->idle_pc = 0;
++#ifdef CONFIG_SMP
++		rq->sd = NULL;
++		rq->rd = NULL;
++		rq->online = 0;
++		INIT_LIST_HEAD(&rq->migration_queue);
++		rq_attach_root(rq, &def_root_domain);
++#endif
++		atomic_set(&rq->nr_iowait, 0);
++		highest_cpu = i;
++	}
++	grq.iso_ticks = grq.nr_running = grq.nr_uninterruptible = 0;
++	for (i = 0; i < PRIO_LIMIT; i++)
++		INIT_LIST_HEAD(grq.queue + i);
++	bitmap_zero(grq.prio_bitmap, PRIO_LIMIT);
++	/* delimiter for bitsearch */
++	__set_bit(PRIO_LIMIT, grq.prio_bitmap);
++
++#ifdef CONFIG_SMP
++	nr_cpu_ids = highest_cpu + 1;
++#endif
++
++#ifdef CONFIG_PREEMPT_NOTIFIERS
++	INIT_HLIST_HEAD(&init_task.preempt_notifiers);
++#endif
++
++#ifdef CONFIG_RT_MUTEXES
++	plist_head_init(&init_task.pi_waiters, &init_task.pi_lock);
++#endif
++
++	/*
++	 * The boot idle thread does lazy MMU switching as well:
++	 */
++	atomic_inc(&init_mm.mm_count);
++	enter_lazy_tlb(&init_mm, current);
++
++	/*
++	 * Make us the idle thread. Technically, schedule() should not be
++	 * called from this thread, however somewhere below it might be,
++	 * but because we are the idle thread, we just pick up running again
++	 * when this runqueue becomes "idle".
++	 */
++	init_idle(current, smp_processor_id());
++
++	/* Allocate the nohz_cpu_mask if CONFIG_CPUMASK_OFFSTACK */
++	alloc_cpumask_var(&nohz_cpu_mask, GFP_NOWAIT);
++#ifdef CONFIG_SMP
++#ifdef CONFIG_NO_HZ
++	alloc_cpumask_var(&nohz.cpu_mask, GFP_NOWAIT);
++	alloc_cpumask_var(&nohz.ilb_grp_nohz_mask, GFP_NOWAIT);
++#endif
++	alloc_cpumask_var(&cpu_isolated_map, GFP_NOWAIT);
++#endif /* SMP */
++	perf_counter_init();
++}
++
++#ifdef CONFIG_DEBUG_SPINLOCK_SLEEP
++void __might_sleep(char *file, int line)
++{
++#ifdef in_atomic
++	static unsigned long prev_jiffy;	/* ratelimiting */
++
++	if ((in_atomic() || irqs_disabled()) &&
++	    system_state == SYSTEM_RUNNING && !oops_in_progress) {
++		if (time_before(jiffies, prev_jiffy + HZ) && prev_jiffy)
++			return;
++		prev_jiffy = jiffies;
++		printk(KERN_ERR "BUG: sleeping function called from invalid"
++				" context at %s:%d\n", file, line);
++		printk("in_atomic():%d, irqs_disabled():%d\n",
++			in_atomic(), irqs_disabled());
++		debug_show_held_locks(current);
++		if (irqs_disabled())
++			print_irqtrace_events(current);
++		dump_stack();
++	}
++#endif
++}
++EXPORT_SYMBOL(__might_sleep);
++#endif
++
++#ifdef CONFIG_MAGIC_SYSRQ
++void normalize_rt_tasks(void)
++{
++	struct task_struct *g, *p;
++	unsigned long flags;
++	struct rq *rq;
++	int queued;
++
++	read_lock_irq(&tasklist_lock);
++
++	do_each_thread(g, p) {
++		if (!rt_task(p) && !iso_task(p))
++			continue;
++
++		spin_lock_irqsave(&p->pi_lock, flags);
++		rq = __task_grq_lock(p);
++		update_rq_clock(rq);
++
++		queued = task_queued_only(p);
++		if (queued)
++			dequeue_task(p);
++		__setscheduler(p, SCHED_NORMAL, 0);
++		if (task_running(p))
++			resched_task(p);
++		if (queued) {
++			enqueue_task(p);
++			try_preempt(p);
++		}
++
++		__task_grq_unlock();
++		spin_unlock_irqrestore(&p->pi_lock, flags);
++	} while_each_thread(g, p);
++
++	read_unlock_irq(&tasklist_lock);
++}
++#endif /* CONFIG_MAGIC_SYSRQ */
++
++#ifdef CONFIG_IA64
++/*
++ * These functions are only useful for the IA64 MCA handling.
++ *
++ * They can only be called when the whole system has been
++ * stopped - every CPU needs to be quiescent, and no scheduling
++ * activity can take place. Using them for anything else would
++ * be a serious bug, and as a result, they aren't even visible
++ * under any other configuration.
++ */
++
++/**
++ * curr_task - return the current task for a given cpu.
++ * @cpu: the processor in question.
++ *
++ * ONLY VALID WHEN THE WHOLE SYSTEM IS STOPPED!
++ */
++struct task_struct *curr_task(int cpu)
++{
++	return cpu_curr(cpu);
++}
++
++/**
++ * set_curr_task - set the current task for a given cpu.
++ * @cpu: the processor in question.
++ * @p: the task pointer to set.
++ *
++ * Description: This function must only be used when non-maskable interrupts
++ * are serviced on a separate stack.  It allows the architecture to switch the
++ * notion of the current task on a cpu in a non-blocking manner.  This function
++ * must be called with all CPU's synchronized, and interrupts disabled, the
++ * and caller must save the original value of the current task (see
++ * curr_task() above) and restore that value before reenabling interrupts and
++ * re-starting the system.
++ *
++ * ONLY VALID WHEN THE WHOLE SYSTEM IS STOPPED!
++ */
++void set_curr_task(int cpu, struct task_struct *p)
++{
++	cpu_curr(cpu) = p;
++}
++
++#endif
++
++/*
++ * Use precise platform statistics if available:
++ */
++#ifdef CONFIG_VIRT_CPU_ACCOUNTING
++cputime_t task_utime(struct task_struct *p)
++{
++	return p->utime;
++}
++
++cputime_t task_stime(struct task_struct *p)
++{
++	return p->stime;
++}
++#else
++cputime_t task_utime(struct task_struct *p)
++{
++	clock_t utime = cputime_to_clock_t(p->utime),
++		total = utime + cputime_to_clock_t(p->stime);
++	u64 temp;
++
++	temp = (u64)nsec_to_clock_t(p->se.sum_exec_runtime);
++
++	if (total) {
++		temp *= utime;
++		do_div(temp, total);
++	}
++	utime = (clock_t)temp;
++
++	p->prev_utime = max(p->prev_utime, clock_t_to_cputime(utime));
++	return p->prev_utime;
++}
++
++cputime_t task_stime(struct task_struct *p)
++{
++	clock_t stime;
++
++	stime = nsec_to_clock_t(p->se.sum_exec_runtime) -
++			cputime_to_clock_t(task_utime(p));
++
++	if (stime >= 0)
++		p->prev_stime = max(p->prev_stime, clock_t_to_cputime(stime));
++
++	return p->prev_stime;
++}
++#endif
++
++inline cputime_t task_gtime(struct task_struct *p)
++{
++	return p->gtime;
++}
++
++void __cpuinit init_idle_bootup_task(struct task_struct *idle)
++{}
++
++#ifdef CONFIG_SCHED_DEBUG
++void proc_sched_show_task(struct task_struct *p, struct seq_file *m)
++{}
++
++void proc_sched_set_task(struct task_struct *p)
++{}
++#endif
+--- a/kernel/sysctl.c
++++ b/kernel/sysctl.c
+@@ -83,6 +83,8 @@ extern int percpu_pagelist_fraction;
+ extern int compat_log;
+ extern int latencytop_enabled;
+ extern int sysctl_nr_open_min, sysctl_nr_open_max;
++extern int rr_interval;
++extern int sched_iso_cpu;
+ #ifndef CONFIG_MMU
+ extern int sysctl_nr_trim_pages;
+ #endif
+@@ -100,7 +102,8 @@ static int zero;
+ static int __maybe_unused one = 1;
+ static int __maybe_unused two = 2;
+ static unsigned long one_ul = 1;
+-static int one_hundred = 100;
++static int __read_mostly one_hundred = 100;
++static int __maybe_unused __read_mostly five_thousand = 5000;
+ 
+ /* this is needed for the proc_doulongvec_minmax of vm_dirty_bytes */
+ static unsigned long dirty_bytes_min = 2 * PAGE_SIZE;
+@@ -234,7 +237,7 @@ static struct ctl_table root_table[] = {
+ 	{ .ctl_name = 0 }
+ };
+ 
+-#ifdef CONFIG_SCHED_DEBUG
++#if defined(CONFIG_SCHED_DEBUG) && defined(CONFIG_SCHED_CFS)
+ static int min_sched_granularity_ns = 100000;		/* 100 usecs */
+ static int max_sched_granularity_ns = NSEC_PER_SEC;	/* 1 second */
+ static int min_wakeup_granularity_ns;			/* 0 usecs */
+@@ -242,7 +245,7 @@ static int max_wakeup_granularity_ns = N
+ #endif
+ 
+ static struct ctl_table kern_table[] = {
+-#ifdef CONFIG_SCHED_DEBUG
++#if defined(CONFIG_SCHED_DEBUG) && defined(CONFIG_SCHED_CFS)
+ 	{
+ 		.ctl_name	= CTL_UNNUMBERED,
+ 		.procname	= "sched_min_granularity_ns",
+@@ -327,6 +330,7 @@ static struct ctl_table kern_table[] = {
+ 		.proc_handler	= &proc_dointvec,
+ 	},
+ #endif
++#ifdef CONFIG_SCHED_CFS
+ 	{
+ 		.ctl_name	= CTL_UNNUMBERED,
+ 		.procname	= "sched_rt_period_us",
+@@ -351,6 +355,7 @@ static struct ctl_table kern_table[] = {
+ 		.mode		= 0644,
+ 		.proc_handler	= &proc_dointvec,
+ 	},
++#endif
+ #ifdef CONFIG_PROVE_LOCKING
+ 	{
+ 		.ctl_name	= CTL_UNNUMBERED,
+@@ -756,6 +761,30 @@ static struct ctl_table kern_table[] = {
+ 		.proc_handler	= &proc_dointvec,
+ 	},
+ #endif
++#ifdef CONFIG_SCHED_BFS
++	{
++		.ctl_name	= CTL_UNNUMBERED,
++		.procname	= "rr_interval",
++		.data		= &rr_interval,
++		.maxlen		= sizeof (int),
++		.mode		= 0644,
++		.proc_handler	= &proc_dointvec_minmax,
++		.strategy	= &sysctl_intvec,
++		.extra1		= &one,
++		.extra2		= &five_thousand,
++	},
++	{
++		.ctl_name	= CTL_UNNUMBERED,
++		.procname	= "iso_cpu",
++		.data		= &sched_iso_cpu,
++		.maxlen		= sizeof (int),
++		.mode		= 0644,
++		.proc_handler	= &proc_dointvec_minmax,
++		.strategy	= &sysctl_intvec,
++		.extra1		= &zero,
++		.extra2		= &one_hundred,
++	},
++#endif
+ #if defined(CONFIG_S390) && defined(CONFIG_SMP)
+ 	{
+ 		.ctl_name	= KERN_SPIN_RETRY,
+--- a/kernel/workqueue.c
++++ b/kernel/workqueue.c
+@@ -320,7 +320,9 @@ static int worker_thread(void *__cwq)
+ 	if (cwq->wq->freezeable)
+ 		set_freezable();
+ 
++#ifdef CONFIG_SCHED_CFS
+ 	set_user_nice(current, -5);
++#endif
+ 
+ 	for (;;) {
+ 		prepare_to_wait(&cwq->more_work, &wait, TASK_INTERRUPTIBLE);
+--- /dev/null
++++ b/include/linux/perf_counter.h
+@@ -0,0 +1,2 @@
++#define perf_counter_init() do {} while(0)
++#define perf_counter_task_sched_in(...) do {} while(0)
+--- /dev/null
++++ b/include/trace/events/sched.h
+@@ -0,0 +1 @@
++#include <trace/sched.h>
diff --git a/target/linux/generic/patches-2.6.30/400-ledtrig_morse.patch b/target/linux/generic/patches-2.6.30/400-ledtrig_morse.patch
new file mode 100644
index 0000000000..2754ed6d7e
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/400-ledtrig_morse.patch
@@ -0,0 +1,18 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -295,4 +295,8 @@ config LEDS_TRIGGER_DEFAULT_ON
+ comment "iptables trigger is under Netfilter config (LED target)"
+ 	depends on LEDS_TRIGGERS
+ 
++config LEDS_TRIGGER_MORSE
++	tristate "LED Morse Trigger"
++	depends on LEDS_TRIGGERS
++
+ endif # NEW_LEDS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -38,3 +38,4 @@ obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT)	+= 
+ obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT)	+= ledtrig-backlight.o
+ obj-$(CONFIG_LEDS_TRIGGER_GPIO)		+= ledtrig-gpio.o
+ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
++obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o
diff --git a/target/linux/generic/patches-2.6.30/402-ledtrig_netdev.patch b/target/linux/generic/patches-2.6.30/402-ledtrig_netdev.patch
new file mode 100644
index 0000000000..c41fecfead
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/402-ledtrig_netdev.patch
@@ -0,0 +1,21 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -299,4 +299,11 @@ config LEDS_TRIGGER_MORSE
+ 	tristate "LED Morse Trigger"
+ 	depends on LEDS_TRIGGERS
+ 
++config LEDS_TRIGGER_NETDEV
++	tristate "LED Netdev Trigger"
++	depends on NET && LEDS_TRIGGERS
++	help
++	  This allows LEDs to be controlled by network device activity.
++	  If unsure, say Y.
++
+ endif # NEW_LEDS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -39,3 +39,4 @@ obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT)	+= 
+ obj-$(CONFIG_LEDS_TRIGGER_GPIO)		+= ledtrig-gpio.o
+ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
+ obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o
++obj-$(CONFIG_LEDS_TRIGGER_NETDEV)      += ledtrig-netdev.o
diff --git a/target/linux/generic/patches-2.6.30/410-gpio_buttons.patch b/target/linux/generic/patches-2.6.30/410-gpio_buttons.patch
new file mode 100644
index 0000000000..139d997dfb
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/410-gpio_buttons.patch
@@ -0,0 +1,30 @@
+--- a/drivers/input/misc/Kconfig
++++ b/drivers/input/misc/Kconfig
+@@ -250,4 +250,20 @@ config INPUT_RB532_BUTTON
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called rb532_button.
+ 
++config INPUT_GPIO_BUTTONS
++	tristate "Polled GPIO buttons interface"
++	depends on GENERIC_GPIO
++	select INPUT_POLLDEV
++	help
++	  This driver implements support for buttons connected
++	  to GPIO pins of various CPUs (and some other chips).
++
++	  Say Y here if your device has buttons connected
++	  directly to such GPIO pins.  Your board-specific
++	  setup logic must also provide a platform device,
++	  with configuration data saying which GPIOs are used.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called gpio-buttons.
++
+ endif
+--- a/drivers/input/misc/Makefile
++++ b/drivers/input/misc/Makefile
+@@ -24,3 +24,4 @@ obj-$(CONFIG_INPUT_SPARCSPKR)		+= sparcs
+ obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
+ obj-$(CONFIG_INPUT_WISTRON_BTNS)	+= wistron_btns.o
+ obj-$(CONFIG_INPUT_YEALINK)		+= yealink.o
++obj-$(CONFIG_INPUT_GPIO_BUTTONS)	+= gpio_buttons.o
diff --git a/target/linux/generic/patches-2.6.30/420-gpiodev.patch b/target/linux/generic/patches-2.6.30/420-gpiodev.patch
new file mode 100644
index 0000000000..989e253d7c
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/420-gpiodev.patch
@@ -0,0 +1,26 @@
+--- a/drivers/char/Kconfig
++++ b/drivers/char/Kconfig
+@@ -1016,6 +1016,13 @@ config CS5535_GPIO
+ 
+ 	  If compiled as a module, it will be called cs5535_gpio.
+ 
++config GPIO_DEVICE
++	tristate "GPIO device support"
++	depends on GENERIC_GPIO
++	help
++	  Say Y to enable Linux GPIO device support.  This allows control of
++	  GPIO pins using a character device
++
+ config GPIO_VR41XX
+ 	tristate "NEC VR4100 series General-purpose I/O Unit support"
+ 	depends on CPU_VR41XX
+--- a/drivers/char/Makefile
++++ b/drivers/char/Makefile
+@@ -94,6 +94,7 @@ obj-$(CONFIG_SCx200_GPIO)	+= scx200_gpio
+ obj-$(CONFIG_PC8736x_GPIO)	+= pc8736x_gpio.o
+ obj-$(CONFIG_NSC_GPIO)		+= nsc_gpio.o
+ obj-$(CONFIG_CS5535_GPIO)	+= cs5535_gpio.o
++obj-$(CONFIG_GPIO_DEVICE)	+= gpio_dev.o
+ obj-$(CONFIG_GPIO_VR41XX)	+= vr41xx_giu.o
+ obj-$(CONFIG_GPIO_TB0219)	+= tb0219.o
+ obj-$(CONFIG_TELCLOCK)		+= tlclk.o
diff --git a/target/linux/generic/patches-2.6.30/430-scsi_header_fix.patch b/target/linux/generic/patches-2.6.30/430-scsi_header_fix.patch
new file mode 100644
index 0000000000..575bec92d7
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/430-scsi_header_fix.patch
@@ -0,0 +1,17 @@
+--- a/include/scsi/scsi.h
++++ b/include/scsi/scsi.h
+@@ -142,10 +142,10 @@ struct scsi_cmnd;
+ 
+ /* defined in T10 SCSI Primary Commands-2 (SPC2) */
+ struct scsi_varlen_cdb_hdr {
+-	u8 opcode;        /* opcode always == VARIABLE_LENGTH_CMD */
+-	u8 control;
+-	u8 misc[5];
+-	u8 additional_cdb_length;         /* total cdb length - 8 */
++	__u8 opcode;        /* opcode always == VARIABLE_LENGTH_CMD */
++	__u8 control;
++	__u8 misc[5];
++	__u8 additional_cdb_length;         /* total cdb length - 8 */
+ 	__be16 service_action;
+ 	/* service specific data follows */
+ };
diff --git a/target/linux/generic/patches-2.6.30/510-yaffs_support.patch b/target/linux/generic/patches-2.6.30/510-yaffs_support.patch
new file mode 100644
index 0000000000..63c034a2d0
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/510-yaffs_support.patch
@@ -0,0 +1,17 @@
+--- a/fs/Kconfig
++++ b/fs/Kconfig
+@@ -177,6 +177,7 @@ source "fs/romfs/Kconfig"
+ source "fs/sysv/Kconfig"
+ source "fs/ufs/Kconfig"
+ source "fs/exofs/Kconfig"
++source "fs/yaffs2/Kconfig"
+ 
+ config NILFS2_FS
+ 	tristate "NILFS2 file system support (EXPERIMENTAL)"
+--- a/fs/Makefile
++++ b/fs/Makefile
+@@ -125,3 +125,4 @@ obj-$(CONFIG_OCFS2_FS)		+= ocfs2/
+ obj-$(CONFIG_BTRFS_FS)		+= btrfs/
+ obj-$(CONFIG_GFS2_FS)           += gfs2/
+ obj-$(CONFIG_EXOFS_FS)          += exofs/
++obj-$(CONFIG_YAFFS_FS)		+= yaffs2/
diff --git a/target/linux/generic/patches-2.6.30/511-yaffs-cvs-2009-04-24.patch b/target/linux/generic/patches-2.6.30/511-yaffs-cvs-2009-04-24.patch
new file mode 100644
index 0000000000..5c70e79a05
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/511-yaffs-cvs-2009-04-24.patch
@@ -0,0 +1,12344 @@
+--- a/fs/yaffs2/devextras.h
++++ b/fs/yaffs2/devextras.h
+@@ -14,194 +14,135 @@
+  */
+ 
+ /*
+- * This file is just holds extra declarations used during development.
+- * Most of these are from kernel includes placed here so we can use them in
+- * applications.
++ * This file is just holds extra declarations of macros that would normally
++ * be providesd in the Linux kernel. These macros have been written from
++ * scratch but are functionally equivalent to the Linux ones.
+  *
+  */
+ 
+ #ifndef __EXTRAS_H__
+ #define __EXTRAS_H__
+ 
+-#if defined WIN32
+-#define __inline__ __inline
+-#define new newHack
+-#endif
+-
+-#if !(defined __KERNEL__) || (defined WIN32)
+ 
+-/* User space defines */
++#if !(defined __KERNEL__)
+ 
++/* Definition of types */
+ typedef unsigned char __u8;
+ typedef unsigned short __u16;
+ typedef unsigned __u32;
+ 
++#endif
++
+ /*
+- * Simple doubly linked list implementation.
+- *
+- * Some of the internal functions ("__xxx") are useful when
+- * manipulating whole lists rather than single entries, as
+- * sometimes we already know the next/prev entries and we can
+- * generate better code by using them directly rather than
+- * using the generic single-entry routines.
++ * This is a simple doubly linked list implementation that matches the
++ * way the Linux kernel doubly linked list implementation works.
+  */
+ 
+-#define prefetch(x) 1
+-
+-struct list_head {
+-	struct list_head *next, *prev;
++struct ylist_head {
++	struct ylist_head *next; /* next in chain */
++	struct ylist_head *prev; /* previous in chain */
+ };
+ 
+-#define LIST_HEAD_INIT(name) { &(name), &(name) }
+ 
+-#define LIST_HEAD(name) \
+-	struct list_head name = LIST_HEAD_INIT(name)
++/* Initialise a static list */
++#define YLIST_HEAD(name) \
++struct ylist_head name = { &(name), &(name)}
++
+ 
+-#define INIT_LIST_HEAD(ptr) do { \
+-	(ptr)->next = (ptr); (ptr)->prev = (ptr); \
++
++/* Initialise a list head to an empty list */
++#define YINIT_LIST_HEAD(p) \
++do { \
++	(p)->next = (p);\
++	(p)->prev = (p); \
+ } while (0)
+ 
+-/*
+- * Insert a new entry between two known consecutive entries.
+- *
+- * This is only for internal list manipulation where we know
+- * the prev/next entries already!
+- */
+-static __inline__ void __list_add(struct list_head *new,
+-				  struct list_head *prev,
+-				  struct list_head *next)
+-{
+-	next->prev = new;
+-	new->next = next;
+-	new->prev = prev;
+-	prev->next = new;
+-}
+ 
+-/**
+- * list_add - add a new entry
+- * @new: new entry to be added
+- * @head: list head to add it after
+- *
+- * Insert a new entry after the specified head.
+- * This is good for implementing stacks.
+- */
+-static __inline__ void list_add(struct list_head *new, struct list_head *head)
++/* Add an element to a list */
++static __inline__ void ylist_add(struct ylist_head *newEntry,
++				struct ylist_head *list)
+ {
+-	__list_add(new, head, head->next);
+-}
++	struct ylist_head *listNext = list->next;
++
++	list->next = newEntry;
++	newEntry->prev = list;
++	newEntry->next = listNext;
++	listNext->prev = newEntry;
+ 
+-/**
+- * list_add_tail - add a new entry
+- * @new: new entry to be added
+- * @head: list head to add it before
+- *
+- * Insert a new entry before the specified head.
+- * This is useful for implementing queues.
+- */
+-static __inline__ void list_add_tail(struct list_head *new,
+-				     struct list_head *head)
+-{
+-	__list_add(new, head->prev, head);
+ }
+ 
+-/*
+- * Delete a list entry by making the prev/next entries
+- * point to each other.
+- *
+- * This is only for internal list manipulation where we know
+- * the prev/next entries already!
+- */
+-static __inline__ void __list_del(struct list_head *prev,
+-				  struct list_head *next)
++static __inline__ void ylist_add_tail(struct ylist_head *newEntry,
++				 struct ylist_head *list)
+ {
+-	next->prev = prev;
+-	prev->next = next;
++	struct ylist_head *listPrev = list->prev;
++
++	list->prev = newEntry;
++	newEntry->next = list;
++	newEntry->prev = listPrev;
++	listPrev->next = newEntry;
++
+ }
+ 
+-/**
+- * list_del - deletes entry from list.
+- * @entry: the element to delete from the list.
+- * Note: list_empty on entry does not return true after this, the entry is
+- * in an undefined state.
+- */
+-static __inline__ void list_del(struct list_head *entry)
++
++/* Take an element out of its current list, with or without
++ * reinitialising the links.of the entry*/
++static __inline__ void ylist_del(struct ylist_head *entry)
+ {
+-	__list_del(entry->prev, entry->next);
++	struct ylist_head *listNext = entry->next;
++	struct ylist_head *listPrev = entry->prev;
++
++	listNext->prev = listPrev;
++	listPrev->next = listNext;
++
+ }
+ 
+-/**
+- * list_del_init - deletes entry from list and reinitialize it.
+- * @entry: the element to delete from the list.
+- */
+-static __inline__ void list_del_init(struct list_head *entry)
++static __inline__ void ylist_del_init(struct ylist_head *entry)
+ {
+-	__list_del(entry->prev, entry->next);
+-	INIT_LIST_HEAD(entry);
++	ylist_del(entry);
++	entry->next = entry->prev = entry;
+ }
+ 
+-/**
+- * list_empty - tests whether a list is empty
+- * @head: the list to test.
+- */
+-static __inline__ int list_empty(struct list_head *head)
++
++/* Test if the list is empty */
++static __inline__ int ylist_empty(struct ylist_head *entry)
+ {
+-	return head->next == head;
++	return (entry->next == entry);
+ }
+ 
+-/**
+- * list_splice - join two lists
+- * @list: the new list to add.
+- * @head: the place to add it in the first list.
++
++/* ylist_entry takes a pointer to a list entry and offsets it to that
++ * we can find a pointer to the object it is embedded in.
+  */
+-static __inline__ void list_splice(struct list_head *list,
+-				   struct list_head *head)
+-{
+-	struct list_head *first = list->next;
+ 
+-	if (first != list) {
+-		struct list_head *last = list->prev;
+-		struct list_head *at = head->next;
+-
+-		first->prev = head;
+-		head->next = first;
+-
+-		last->next = at;
+-		at->prev = last;
+-	}
+-}
+ 
+-/**
+- * list_entry - get the struct for this entry
+- * @ptr:	the &struct list_head pointer.
+- * @type:	the type of the struct this is embedded in.
+- * @member:	the name of the list_struct within the struct.
+- */
+-#define list_entry(ptr, type, member) \
+-	((type *)((char *)(ptr)-(unsigned long)(&((type *)0)->member)))
+-
+-/**
+- * list_for_each	-	iterate over a list
+- * @pos:	the &struct list_head to use as a loop counter.
+- * @head:	the head for your list.
+- */
+-#define list_for_each(pos, head) \
+-	for (pos = (head)->next, prefetch(pos->next); pos != (head); \
+-        	pos = pos->next, prefetch(pos->next))
+-
+-/**
+- * list_for_each_safe	-	iterate over a list safe against removal
+- *                              of list entry
+- * @pos:	the &struct list_head to use as a loop counter.
+- * @n:		another &struct list_head to use as temporary storage
+- * @head:	the head for your list.
+- */
+-#define list_for_each_safe(pos, n, head) \
+-	for (pos = (head)->next, n = pos->next; pos != (head); \
+-		pos = n, n = pos->next)
++#define ylist_entry(entry, type, member) \
++	((type *)((char *)(entry)-(unsigned long)(&((type *)NULL)->member)))
+ 
+-/*
+- * File types
++
++/* ylist_for_each and list_for_each_safe  iterate over lists.
++ * ylist_for_each_safe uses temporary storage to make the list delete safe
+  */
++
++#define ylist_for_each(itervar, list) \
++	for (itervar = (list)->next; itervar != (list); itervar = itervar->next)
++
++#define ylist_for_each_safe(itervar, saveVar, list) \
++	for (itervar = (list)->next, saveVar = (list)->next->next; \
++		itervar != (list); itervar = saveVar, saveVar = saveVar->next)
++
++
++#if !(defined __KERNEL__)
++
++
++#ifndef WIN32
++#include <sys/stat.h>
++#endif
++
++
++#ifdef CONFIG_YAFFS_PROVIDE_DEFS
++/* File types */
++
++
+ #define DT_UNKNOWN	0
+ #define DT_FIFO		1
+ #define DT_CHR		2
+@@ -212,6 +153,7 @@ static __inline__ void list_splice(struc
+ #define DT_SOCK		12
+ #define DT_WHT		14
+ 
++
+ #ifndef WIN32
+ #include <sys/stat.h>
+ #endif
+@@ -227,10 +169,6 @@ static __inline__ void list_splice(struc
+ #define ATTR_ATIME	16
+ #define ATTR_MTIME	32
+ #define ATTR_CTIME	64
+-#define ATTR_ATIME_SET	128
+-#define ATTR_MTIME_SET	256
+-#define ATTR_FORCE	512	/* Not a change, but a change it */
+-#define ATTR_ATTR_FLAG	1024
+ 
+ struct iattr {
+ 	unsigned int ia_valid;
+@@ -244,21 +182,15 @@ struct iattr {
+ 	unsigned int ia_attr_flags;
+ };
+ 
+-#define KERN_DEBUG
++#endif
+ 
+ #else
+ 
+-#ifndef WIN32
+ #include <linux/types.h>
+-#include <linux/list.h>
+ #include <linux/fs.h>
+ #include <linux/stat.h>
+-#endif
+ 
+ #endif
+ 
+-#if defined WIN32
+-#undef new
+-#endif
+ 
+ #endif
+--- a/fs/yaffs2/Kconfig
++++ b/fs/yaffs2/Kconfig
+@@ -5,7 +5,7 @@
+ config YAFFS_FS
+ 	tristate "YAFFS2 file system support"
+ 	default n
+-	depends on MTD
++	depends on MTD_BLOCK
+ 	select YAFFS_YAFFS1
+ 	select YAFFS_YAFFS2
+ 	help
+@@ -43,7 +43,8 @@ config YAFFS_9BYTE_TAGS
+ 	  format that you need to continue to support.  New data written
+ 	  also uses the older-style format.  Note: Use of this option
+ 	  generally requires that MTD's oob layout be adjusted to use the
+-	  older-style format.  See notes on tags formats and MTD versions.
++	  older-style format.  See notes on tags formats and MTD versions
++	  in yaffs_mtdif1.c.
+ 
+ 	  If unsure, say N.
+ 
+@@ -109,26 +110,6 @@ config YAFFS_DISABLE_LAZY_LOAD
+ 
+ 	  If unsure, say N.
+ 
+-config YAFFS_CHECKPOINT_RESERVED_BLOCKS
+-	int "Reserved blocks for checkpointing"
+-	depends on YAFFS_YAFFS2
+-	default 10
+-	help
+-          Give the number of Blocks to reserve for checkpointing.
+-	  Checkpointing saves the state at unmount so that mounting is
+-	  much faster as a scan of all the flash to regenerate this state
+-	  is not needed.  These Blocks are reserved per partition, so if
+-	  you have very small partitions the default (10) may be a mess
+-	  for you.  You can set this value to 0, but that does not mean
+-	  checkpointing is disabled at all. There only won't be any
+-	  specially reserved blocks for checkpointing, so if there is
+-	  enough free space on the filesystem, it will be used for
+-	  checkpointing.
+-
+-	  If unsure, leave at default (10), but don't wonder if there are
+-	  always 2MB used on your large page device partition (10 x 2k
+-	  pagesize). When using small partitions or when being very small
+-	  on space, you probably want to set this to zero.
+ 
+ config YAFFS_DISABLE_WIDE_TNODES
+ 	bool "Turn off wide tnodes"
+--- a/fs/yaffs2/Makefile
++++ b/fs/yaffs2/Makefile
+@@ -5,7 +5,6 @@
+ obj-$(CONFIG_YAFFS_FS) += yaffs.o
+ 
+ yaffs-y := yaffs_ecc.o yaffs_fs.o yaffs_guts.o yaffs_checkptrw.o
+-yaffs-y += yaffs_packedtags2.o yaffs_nand.o yaffs_qsort.o
++yaffs-y += yaffs_packedtags1.o yaffs_packedtags2.o yaffs_nand.o yaffs_qsort.o
+ yaffs-y += yaffs_tagscompat.o yaffs_tagsvalidity.o
+-yaffs-y += yaffs_mtdif1.o yaffs_packedtags1.o
+-yaffs-y += yaffs_mtdif.o yaffs_mtdif2.o
++yaffs-y += yaffs_mtdif.o yaffs_mtdif1.o yaffs_mtdif2.o
+--- a/fs/yaffs2/moduleconfig.h
++++ b/fs/yaffs2/moduleconfig.h
+@@ -27,12 +27,12 @@
+ 
+ /* Default: Not selected */
+ /* Meaning: Yaffs does its own ECC, rather than using MTD ECC */
+-//#define CONFIG_YAFFS_DOES_ECC
++/* #define CONFIG_YAFFS_DOES_ECC */
+ 
+ /* Default: Not selected */
+ /* Meaning: ECC byte order is 'wrong'.  Only meaningful if */
+ /*          CONFIG_YAFFS_DOES_ECC is set */
+-//#define CONFIG_YAFFS_ECC_WRONG_ORDER
++/* #define CONFIG_YAFFS_ECC_WRONG_ORDER */
+ 
+ /* Default: Selected */
+ /* Meaning: Disables testing whether chunks are erased before writing to them*/
+@@ -54,11 +54,11 @@ that you need to continue to support.  N
+ older-style format.
+ Note: Use of this option generally requires that MTD's oob layout be
+ adjusted to use the older-style format.  See notes on tags formats and
+-MTD versions.
++MTD versions in yaffs_mtdif1.c.
+ */
+ /* Default: Not selected */
+ /* Meaning: Use older-style on-NAND data format with pageStatus byte */
+-#define CONFIG_YAFFS_9BYTE_TAGS
++/* #define CONFIG_YAFFS_9BYTE_TAGS */
+ 
+ #endif /* YAFFS_OUT_OF_TREE */
+ 
+--- a/fs/yaffs2/yaffs_checkptrw.c
++++ b/fs/yaffs2/yaffs_checkptrw.c
+@@ -12,48 +12,43 @@
+  */
+ 
+ const char *yaffs_checkptrw_c_version =
+-    "$Id: yaffs_checkptrw.c,v 1.14 2007-05-15 20:07:40 charles Exp $";
++	"$Id: yaffs_checkptrw.c,v 1.18 2009-03-06 17:20:49 wookey Exp $";
+ 
+ 
+ #include "yaffs_checkptrw.h"
+-
++#include "yaffs_getblockinfo.h"
+ 
+ static int yaffs_CheckpointSpaceOk(yaffs_Device *dev)
+ {
+-
+ 	int blocksAvailable = dev->nErasedBlocks - dev->nReservedBlocks;
+ 
+ 	T(YAFFS_TRACE_CHECKPOINT,
+ 		(TSTR("checkpt blocks available = %d" TENDSTR),
+ 		blocksAvailable));
+ 
+-
+ 	return (blocksAvailable <= 0) ? 0 : 1;
+ }
+ 
+ 
+ static int yaffs_CheckpointErase(yaffs_Device *dev)
+ {
+-
+ 	int i;
+ 
+-
+-	if(!dev->eraseBlockInNAND)
++	if (!dev->eraseBlockInNAND)
+ 		return 0;
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("checking blocks %d to %d"TENDSTR),
+-		dev->internalStartBlock,dev->internalEndBlock));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("checking blocks %d to %d"TENDSTR),
++		dev->internalStartBlock, dev->internalEndBlock));
+ 
+-	for(i = dev->internalStartBlock; i <= dev->internalEndBlock; i++) {
+-		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,i);
+-		if(bi->blockState == YAFFS_BLOCK_STATE_CHECKPOINT){
+-			T(YAFFS_TRACE_CHECKPOINT,(TSTR("erasing checkpt block %d"TENDSTR),i));
+-			if(dev->eraseBlockInNAND(dev,i- dev->blockOffset /* realign */)){
++	for (i = dev->internalStartBlock; i <= dev->internalEndBlock; i++) {
++		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, i);
++		if (bi->blockState == YAFFS_BLOCK_STATE_CHECKPOINT) {
++			T(YAFFS_TRACE_CHECKPOINT, (TSTR("erasing checkpt block %d"TENDSTR), i));
++			if (dev->eraseBlockInNAND(dev, i - dev->blockOffset /* realign */)) {
+ 				bi->blockState = YAFFS_BLOCK_STATE_EMPTY;
+ 				dev->nErasedBlocks++;
+ 				dev->nFreeChunks += dev->nChunksPerBlock;
+-			}
+-			else {
+-				dev->markNANDBlockBad(dev,i);
++			} else {
++				dev->markNANDBlockBad(dev, i);
+ 				bi->blockState = YAFFS_BLOCK_STATE_DEAD;
+ 			}
+ 		}
+@@ -71,23 +66,23 @@ static void yaffs_CheckpointFindNextEras
+ 	int blocksAvailable = dev->nErasedBlocks - dev->nReservedBlocks;
+ 	T(YAFFS_TRACE_CHECKPOINT,
+ 		(TSTR("allocating checkpt block: erased %d reserved %d avail %d next %d "TENDSTR),
+-		dev->nErasedBlocks,dev->nReservedBlocks,blocksAvailable,dev->checkpointNextBlock));
++		dev->nErasedBlocks, dev->nReservedBlocks, blocksAvailable, dev->checkpointNextBlock));
+ 
+-	if(dev->checkpointNextBlock >= 0 &&
+-	   dev->checkpointNextBlock <= dev->internalEndBlock &&
+-	   blocksAvailable > 0){
+-
+-		for(i = dev->checkpointNextBlock; i <= dev->internalEndBlock; i++){
+-			yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,i);
+-			if(bi->blockState == YAFFS_BLOCK_STATE_EMPTY){
++	if (dev->checkpointNextBlock >= 0 &&
++			dev->checkpointNextBlock <= dev->internalEndBlock &&
++			blocksAvailable > 0) {
++
++		for (i = dev->checkpointNextBlock; i <= dev->internalEndBlock; i++) {
++			yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, i);
++			if (bi->blockState == YAFFS_BLOCK_STATE_EMPTY) {
+ 				dev->checkpointNextBlock = i + 1;
+ 				dev->checkpointCurrentBlock = i;
+-				T(YAFFS_TRACE_CHECKPOINT,(TSTR("allocating checkpt block %d"TENDSTR),i));
++				T(YAFFS_TRACE_CHECKPOINT, (TSTR("allocating checkpt block %d"TENDSTR), i));
+ 				return;
+ 			}
+ 		}
+ 	}
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("out of checkpt blocks"TENDSTR)));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("out of checkpt blocks"TENDSTR)));
+ 
+ 	dev->checkpointNextBlock = -1;
+ 	dev->checkpointCurrentBlock = -1;
+@@ -98,30 +93,31 @@ static void yaffs_CheckpointFindNextChec
+ 	int  i;
+ 	yaffs_ExtendedTags tags;
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("find next checkpt block: start:  blocks %d next %d" TENDSTR),
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("find next checkpt block: start:  blocks %d next %d" TENDSTR),
+ 		dev->blocksInCheckpoint, dev->checkpointNextBlock));
+ 
+-	if(dev->blocksInCheckpoint < dev->checkpointMaxBlocks)
+-		for(i = dev->checkpointNextBlock; i <= dev->internalEndBlock; i++){
++	if (dev->blocksInCheckpoint < dev->checkpointMaxBlocks)
++		for (i = dev->checkpointNextBlock; i <= dev->internalEndBlock; i++) {
+ 			int chunk = i * dev->nChunksPerBlock;
+ 			int realignedChunk = chunk - dev->chunkOffset;
+ 
+-			dev->readChunkWithTagsFromNAND(dev,realignedChunk,NULL,&tags);
+-			T(YAFFS_TRACE_CHECKPOINT,(TSTR("find next checkpt block: search: block %d oid %d seq %d eccr %d" TENDSTR),
+-				i, tags.objectId,tags.sequenceNumber,tags.eccResult));
++			dev->readChunkWithTagsFromNAND(dev, realignedChunk,
++					NULL, &tags);
++			T(YAFFS_TRACE_CHECKPOINT, (TSTR("find next checkpt block: search: block %d oid %d seq %d eccr %d" TENDSTR),
++				i, tags.objectId, tags.sequenceNumber, tags.eccResult));
+ 
+-			if(tags.sequenceNumber == YAFFS_SEQUENCE_CHECKPOINT_DATA){
++			if (tags.sequenceNumber == YAFFS_SEQUENCE_CHECKPOINT_DATA) {
+ 				/* Right kind of block */
+ 				dev->checkpointNextBlock = tags.objectId;
+ 				dev->checkpointCurrentBlock = i;
+ 				dev->checkpointBlockList[dev->blocksInCheckpoint] = i;
+ 				dev->blocksInCheckpoint++;
+-				T(YAFFS_TRACE_CHECKPOINT,(TSTR("found checkpt block %d"TENDSTR),i));
++				T(YAFFS_TRACE_CHECKPOINT, (TSTR("found checkpt block %d"TENDSTR), i));
+ 				return;
+ 			}
+ 		}
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("found no more checkpt blocks"TENDSTR)));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("found no more checkpt blocks"TENDSTR)));
+ 
+ 	dev->checkpointNextBlock = -1;
+ 	dev->checkpointCurrentBlock = -1;
+@@ -133,17 +129,17 @@ int yaffs_CheckpointOpen(yaffs_Device *d
+ 
+ 	/* Got the functions we need? */
+ 	if (!dev->writeChunkWithTagsToNAND ||
+-	    !dev->readChunkWithTagsFromNAND ||
+-	    !dev->eraseBlockInNAND ||
+-	    !dev->markNANDBlockBad)
++			!dev->readChunkWithTagsFromNAND ||
++			!dev->eraseBlockInNAND ||
++			!dev->markNANDBlockBad)
+ 		return 0;
+ 
+-	if(forWriting && !yaffs_CheckpointSpaceOk(dev))
++	if (forWriting && !yaffs_CheckpointSpaceOk(dev))
+ 		return 0;
+ 
+-	if(!dev->checkpointBuffer)
+-		dev->checkpointBuffer = YMALLOC_DMA(dev->nDataBytesPerChunk);
+-	if(!dev->checkpointBuffer)
++	if (!dev->checkpointBuffer)
++		dev->checkpointBuffer = YMALLOC_DMA(dev->totalBytesPerChunk);
++	if (!dev->checkpointBuffer)
+ 		return 0;
+ 
+ 
+@@ -159,12 +155,10 @@ int yaffs_CheckpointOpen(yaffs_Device *d
+ 	dev->checkpointNextBlock = dev->internalStartBlock;
+ 
+ 	/* Erase all the blocks in the checkpoint area */
+-	if(forWriting){
+-		memset(dev->checkpointBuffer,0,dev->nDataBytesPerChunk);
++	if (forWriting) {
++		memset(dev->checkpointBuffer, 0, dev->nDataBytesPerChunk);
+ 		dev->checkpointByteOffset = 0;
+ 		return yaffs_CheckpointErase(dev);
+-
+-
+ 	} else {
+ 		int i;
+ 		/* Set to a value that will kick off a read */
+@@ -174,7 +168,7 @@ int yaffs_CheckpointOpen(yaffs_Device *d
+ 		dev->blocksInCheckpoint = 0;
+ 		dev->checkpointMaxBlocks = (dev->internalEndBlock - dev->internalStartBlock)/16 + 2;
+ 		dev->checkpointBlockList = YMALLOC(sizeof(int) * dev->checkpointMaxBlocks);
+-		for(i = 0; i < dev->checkpointMaxBlocks; i++)
++		for (i = 0; i < dev->checkpointMaxBlocks; i++)
+ 			dev->checkpointBlockList[i] = -1;
+ 	}
+ 
+@@ -191,18 +185,17 @@ int yaffs_GetCheckpointSum(yaffs_Device 
+ 
+ static int yaffs_CheckpointFlushBuffer(yaffs_Device *dev)
+ {
+-
+ 	int chunk;
+ 	int realignedChunk;
+ 
+ 	yaffs_ExtendedTags tags;
+ 
+-	if(dev->checkpointCurrentBlock < 0){
++	if (dev->checkpointCurrentBlock < 0) {
+ 		yaffs_CheckpointFindNextErasedBlock(dev);
+ 		dev->checkpointCurrentChunk = 0;
+ 	}
+ 
+-	if(dev->checkpointCurrentBlock < 0)
++	if (dev->checkpointCurrentBlock < 0)
+ 		return 0;
+ 
+ 	tags.chunkDeleted = 0;
+@@ -210,10 +203,10 @@ static int yaffs_CheckpointFlushBuffer(y
+ 	tags.chunkId = dev->checkpointPageSequence + 1;
+ 	tags.sequenceNumber =  YAFFS_SEQUENCE_CHECKPOINT_DATA;
+ 	tags.byteCount = dev->nDataBytesPerChunk;
+-	if(dev->checkpointCurrentChunk == 0){
++	if (dev->checkpointCurrentChunk == 0) {
+ 		/* First chunk we write for the block? Set block state to
+ 		   checkpoint */
+-		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,dev->checkpointCurrentBlock);
++		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, dev->checkpointCurrentBlock);
+ 		bi->blockState = YAFFS_BLOCK_STATE_CHECKPOINT;
+ 		dev->blocksInCheckpoint++;
+ 	}
+@@ -221,28 +214,29 @@ static int yaffs_CheckpointFlushBuffer(y
+ 	chunk = dev->checkpointCurrentBlock * dev->nChunksPerBlock + dev->checkpointCurrentChunk;
+ 
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("checkpoint wite buffer nand %d(%d:%d) objid %d chId %d" TENDSTR),
+-		chunk, dev->checkpointCurrentBlock, dev->checkpointCurrentChunk,tags.objectId,tags.chunkId));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("checkpoint wite buffer nand %d(%d:%d) objid %d chId %d" TENDSTR),
++		chunk, dev->checkpointCurrentBlock, dev->checkpointCurrentChunk, tags.objectId, tags.chunkId));
+ 
+ 	realignedChunk = chunk - dev->chunkOffset;
+ 
+-	dev->writeChunkWithTagsToNAND(dev,realignedChunk,dev->checkpointBuffer,&tags);
++	dev->writeChunkWithTagsToNAND(dev, realignedChunk,
++			dev->checkpointBuffer, &tags);
+ 	dev->checkpointByteOffset = 0;
+ 	dev->checkpointPageSequence++;
+ 	dev->checkpointCurrentChunk++;
+-	if(dev->checkpointCurrentChunk >= dev->nChunksPerBlock){
++	if (dev->checkpointCurrentChunk >= dev->nChunksPerBlock) {
+ 		dev->checkpointCurrentChunk = 0;
+ 		dev->checkpointCurrentBlock = -1;
+ 	}
+-	memset(dev->checkpointBuffer,0,dev->nDataBytesPerChunk);
++	memset(dev->checkpointBuffer, 0, dev->nDataBytesPerChunk);
+ 
+ 	return 1;
+ }
+ 
+ 
+-int yaffs_CheckpointWrite(yaffs_Device *dev,const void *data, int nBytes)
++int yaffs_CheckpointWrite(yaffs_Device *dev, const void *data, int nBytes)
+ {
+-	int i=0;
++	int i = 0;
+ 	int ok = 1;
+ 
+ 
+@@ -250,17 +244,14 @@ int yaffs_CheckpointWrite(yaffs_Device *
+ 
+ 
+ 
+-	if(!dev->checkpointBuffer)
++	if (!dev->checkpointBuffer)
+ 		return 0;
+ 
+-	if(!dev->checkpointOpenForWrite)
++	if (!dev->checkpointOpenForWrite)
+ 		return -1;
+ 
+-	while(i < nBytes && ok) {
+-
+-
+-
+-		dev->checkpointBuffer[dev->checkpointByteOffset] = *dataBytes ;
++	while (i < nBytes && ok) {
++		dev->checkpointBuffer[dev->checkpointByteOffset] = *dataBytes;
+ 		dev->checkpointSum += *dataBytes;
+ 		dev->checkpointXor ^= *dataBytes;
+ 
+@@ -270,18 +261,17 @@ int yaffs_CheckpointWrite(yaffs_Device *
+ 		dev->checkpointByteCount++;
+ 
+ 
+-		if(dev->checkpointByteOffset < 0 ||
++		if (dev->checkpointByteOffset < 0 ||
+ 		   dev->checkpointByteOffset >= dev->nDataBytesPerChunk)
+ 			ok = yaffs_CheckpointFlushBuffer(dev);
+-
+ 	}
+ 
+-	return 	i;
++	return i;
+ }
+ 
+ int yaffs_CheckpointRead(yaffs_Device *dev, void *data, int nBytes)
+ {
+-	int i=0;
++	int i = 0;
+ 	int ok = 1;
+ 	yaffs_ExtendedTags tags;
+ 
+@@ -291,52 +281,54 @@ int yaffs_CheckpointRead(yaffs_Device *d
+ 
+ 	__u8 *dataBytes = (__u8 *)data;
+ 
+-	if(!dev->checkpointBuffer)
++	if (!dev->checkpointBuffer)
+ 		return 0;
+ 
+-	if(dev->checkpointOpenForWrite)
++	if (dev->checkpointOpenForWrite)
+ 		return -1;
+ 
+-	while(i < nBytes && ok) {
++	while (i < nBytes && ok) {
+ 
+ 
+-		if(dev->checkpointByteOffset < 0 ||
+-		   dev->checkpointByteOffset >= dev->nDataBytesPerChunk) {
++		if (dev->checkpointByteOffset < 0 ||
++			dev->checkpointByteOffset >= dev->nDataBytesPerChunk) {
+ 
+-		   	if(dev->checkpointCurrentBlock < 0){
++			if (dev->checkpointCurrentBlock < 0) {
+ 				yaffs_CheckpointFindNextCheckpointBlock(dev);
+ 				dev->checkpointCurrentChunk = 0;
+ 			}
+ 
+-			if(dev->checkpointCurrentBlock < 0)
++			if (dev->checkpointCurrentBlock < 0)
+ 				ok = 0;
+ 			else {
+-
+-				chunk = dev->checkpointCurrentBlock * dev->nChunksPerBlock +
+-				          dev->checkpointCurrentChunk;
++				chunk = dev->checkpointCurrentBlock *
++					dev->nChunksPerBlock +
++					dev->checkpointCurrentChunk;
+ 
+ 				realignedChunk = chunk - dev->chunkOffset;
+ 
+-	   			/* read in the next chunk */
+-	   			/* printf("read checkpoint page %d\n",dev->checkpointPage); */
+-				dev->readChunkWithTagsFromNAND(dev, realignedChunk,
+-							       dev->checkpointBuffer,
+-							      &tags);
+-
+-				if(tags.chunkId != (dev->checkpointPageSequence + 1) ||
+-				   tags.sequenceNumber != YAFFS_SEQUENCE_CHECKPOINT_DATA)
+-				   ok = 0;
++				/* read in the next chunk */
++				/* printf("read checkpoint page %d\n",dev->checkpointPage); */
++				dev->readChunkWithTagsFromNAND(dev,
++						realignedChunk,
++						dev->checkpointBuffer,
++						&tags);
++
++				if (tags.chunkId != (dev->checkpointPageSequence + 1) ||
++					tags.eccResult > YAFFS_ECC_RESULT_FIXED ||
++					tags.sequenceNumber != YAFFS_SEQUENCE_CHECKPOINT_DATA)
++					ok = 0;
+ 
+ 				dev->checkpointByteOffset = 0;
+ 				dev->checkpointPageSequence++;
+ 				dev->checkpointCurrentChunk++;
+ 
+-				if(dev->checkpointCurrentChunk >= dev->nChunksPerBlock)
++				if (dev->checkpointCurrentChunk >= dev->nChunksPerBlock)
+ 					dev->checkpointCurrentBlock = -1;
+ 			}
+ 		}
+ 
+-		if(ok){
++		if (ok) {
+ 			*dataBytes = dev->checkpointBuffer[dev->checkpointByteOffset];
+ 			dev->checkpointSum += *dataBytes;
+ 			dev->checkpointXor ^= *dataBytes;
+@@ -353,17 +345,17 @@ int yaffs_CheckpointRead(yaffs_Device *d
+ int yaffs_CheckpointClose(yaffs_Device *dev)
+ {
+ 
+-	if(dev->checkpointOpenForWrite){
+-		if(dev->checkpointByteOffset != 0)
++	if (dev->checkpointOpenForWrite) {
++		if (dev->checkpointByteOffset != 0)
+ 			yaffs_CheckpointFlushBuffer(dev);
+ 	} else {
+ 		int i;
+-		for(i = 0; i < dev->blocksInCheckpoint && dev->checkpointBlockList[i] >= 0; i++){
+-			yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,dev->checkpointBlockList[i]);
+-			if(bi->blockState == YAFFS_BLOCK_STATE_EMPTY)
++		for (i = 0; i < dev->blocksInCheckpoint && dev->checkpointBlockList[i] >= 0; i++) {
++			yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, dev->checkpointBlockList[i]);
++			if (bi->blockState == YAFFS_BLOCK_STATE_EMPTY)
+ 				bi->blockState = YAFFS_BLOCK_STATE_CHECKPOINT;
+ 			else {
+-				// Todo this looks odd...
++				/* Todo this looks odd... */
+ 			}
+ 		}
+ 		YFREE(dev->checkpointBlockList);
+@@ -374,27 +366,25 @@ int yaffs_CheckpointClose(yaffs_Device *
+ 	dev->nErasedBlocks -= dev->blocksInCheckpoint;
+ 
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("checkpoint byte count %d" TENDSTR),
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("checkpoint byte count %d" TENDSTR),
+ 			dev->checkpointByteCount));
+ 
+-	if(dev->checkpointBuffer){
++	if (dev->checkpointBuffer) {
+ 		/* free the buffer */
+ 		YFREE(dev->checkpointBuffer);
+ 		dev->checkpointBuffer = NULL;
+ 		return 1;
+-	}
+-	else
++	} else
+ 		return 0;
+-
+ }
+ 
+ int yaffs_CheckpointInvalidateStream(yaffs_Device *dev)
+ {
+ 	/* Erase the first checksum block */
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("checkpoint invalidate"TENDSTR)));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("checkpoint invalidate"TENDSTR)));
+ 
+-	if(!yaffs_CheckpointSpaceOk(dev))
++	if (!yaffs_CheckpointSpaceOk(dev))
+ 		return 0;
+ 
+ 	return yaffs_CheckpointErase(dev);
+--- a/fs/yaffs2/yaffs_checkptrw.h
++++ b/fs/yaffs2/yaffs_checkptrw.h
+@@ -20,9 +20,9 @@
+ 
+ int yaffs_CheckpointOpen(yaffs_Device *dev, int forWriting);
+ 
+-int yaffs_CheckpointWrite(yaffs_Device *dev,const void *data, int nBytes);
++int yaffs_CheckpointWrite(yaffs_Device *dev, const void *data, int nBytes);
+ 
+-int yaffs_CheckpointRead(yaffs_Device *dev,void *data, int nBytes);
++int yaffs_CheckpointRead(yaffs_Device *dev, void *data, int nBytes);
+ 
+ int yaffs_GetCheckpointSum(yaffs_Device *dev, __u32 *sum);
+ 
+--- a/fs/yaffs2/yaffs_ecc.c
++++ b/fs/yaffs2/yaffs_ecc.c
+@@ -29,7 +29,7 @@
+  */
+ 
+ const char *yaffs_ecc_c_version =
+-    "$Id: yaffs_ecc.c,v 1.9 2007-02-14 01:09:06 wookey Exp $";
++	"$Id: yaffs_ecc.c,v 1.11 2009-03-06 17:20:50 wookey Exp $";
+ 
+ #include "yportenv.h"
+ 
+@@ -109,12 +109,10 @@ void yaffs_ECCCalculate(const unsigned c
+ 		b = column_parity_table[*data++];
+ 		col_parity ^= b;
+ 
+-		if (b & 0x01)	// odd number of bits in the byte
+-		{
++		if (b & 0x01) {		/* odd number of bits in the byte */
+ 			line_parity ^= i;
+ 			line_parity_prime ^= ~i;
+ 		}
+-
+ 	}
+ 
+ 	ecc[2] = (~col_parity) | 0x03;
+@@ -158,7 +156,7 @@ void yaffs_ECCCalculate(const unsigned c
+ 	ecc[0] = ~t;
+ 
+ #ifdef CONFIG_YAFFS_ECC_WRONG_ORDER
+-	// Swap the bytes into the wrong order
++	/* Swap the bytes into the wrong order */
+ 	t = ecc[0];
+ 	ecc[0] = ecc[1];
+ 	ecc[1] = t;
+@@ -189,7 +187,7 @@ int yaffs_ECCCorrect(unsigned char *data
+ 		unsigned bit;
+ 
+ #ifdef CONFIG_YAFFS_ECC_WRONG_ORDER
+-		// swap the bytes to correct for the wrong order
++		/* swap the bytes to correct for the wrong order */
+ 		unsigned char t;
+ 
+ 		t = d0;
+@@ -251,7 +249,7 @@ int yaffs_ECCCorrect(unsigned char *data
+  * ECCxxxOther does ECC calcs on arbitrary n bytes of data
+  */
+ void yaffs_ECCCalculateOther(const unsigned char *data, unsigned nBytes,
+-			     yaffs_ECCOther * eccOther)
++				yaffs_ECCOther *eccOther)
+ {
+ 	unsigned int i;
+ 
+@@ -278,8 +276,8 @@ void yaffs_ECCCalculateOther(const unsig
+ }
+ 
+ int yaffs_ECCCorrectOther(unsigned char *data, unsigned nBytes,
+-			  yaffs_ECCOther * read_ecc,
+-			  const yaffs_ECCOther * test_ecc)
++			yaffs_ECCOther *read_ecc,
++			const yaffs_ECCOther *test_ecc)
+ {
+ 	unsigned char cDelta;	/* column parity delta */
+ 	unsigned lDelta;	/* line parity delta */
+@@ -294,8 +292,7 @@ int yaffs_ECCCorrectOther(unsigned char 
+ 		return 0; /* no error */
+ 
+ 	if (lDelta == ~lDeltaPrime &&
+-	    (((cDelta ^ (cDelta >> 1)) & 0x15) == 0x15))
+-	{
++	    (((cDelta ^ (cDelta >> 1)) & 0x15) == 0x15)) {
+ 		/* Single bit (recoverable) error in data */
+ 
+ 		bit = 0;
+@@ -307,7 +304,7 @@ int yaffs_ECCCorrectOther(unsigned char 
+ 		if (cDelta & 0x02)
+ 			bit |= 0x01;
+ 
+-		if(lDelta >= nBytes)
++		if (lDelta >= nBytes)
+ 			return -1;
+ 
+ 		data[lDelta] ^= (1 << bit);
+@@ -316,7 +313,7 @@ int yaffs_ECCCorrectOther(unsigned char 
+ 	}
+ 
+ 	if ((yaffs_CountBits32(lDelta) + yaffs_CountBits32(lDeltaPrime) +
+-	     yaffs_CountBits(cDelta)) == 1) {
++			yaffs_CountBits(cDelta)) == 1) {
+ 		/* Reccoverable error in ecc */
+ 
+ 		*read_ecc = *test_ecc;
+@@ -326,6 +323,4 @@ int yaffs_ECCCorrectOther(unsigned char 
+ 	/* Unrecoverable error */
+ 
+ 	return -1;
+-
+ }
+-
+--- a/fs/yaffs2/yaffs_ecc.h
++++ b/fs/yaffs2/yaffs_ecc.h
+@@ -13,15 +13,15 @@
+  * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+  */
+ 
+- /*
+-  * This code implements the ECC algorithm used in SmartMedia.
+-  *
+-  * The ECC comprises 22 bits of parity information and is stuffed into 3 bytes.
+-  * The two unused bit are set to 1.
+-  * The ECC can correct single bit errors in a 256-byte page of data. Thus, two such ECC
+-  * blocks are used on a 512-byte NAND page.
+-  *
+-  */
++/*
++ * This code implements the ECC algorithm used in SmartMedia.
++ *
++ * The ECC comprises 22 bits of parity information and is stuffed into 3 bytes.
++ * The two unused bit are set to 1.
++ * The ECC can correct single bit errors in a 256-byte page of data. Thus, two such ECC
++ * blocks are used on a 512-byte NAND page.
++ *
++ */
+ 
+ #ifndef __YAFFS_ECC_H__
+ #define __YAFFS_ECC_H__
+@@ -34,11 +34,11 @@ typedef struct {
+ 
+ void yaffs_ECCCalculate(const unsigned char *data, unsigned char *ecc);
+ int yaffs_ECCCorrect(unsigned char *data, unsigned char *read_ecc,
+-		     const unsigned char *test_ecc);
++		const unsigned char *test_ecc);
+ 
+ void yaffs_ECCCalculateOther(const unsigned char *data, unsigned nBytes,
+-			     yaffs_ECCOther * ecc);
++			yaffs_ECCOther *ecc);
+ int yaffs_ECCCorrectOther(unsigned char *data, unsigned nBytes,
+-			  yaffs_ECCOther * read_ecc,
+-			  const yaffs_ECCOther * test_ecc);
++			yaffs_ECCOther *read_ecc,
++			const yaffs_ECCOther *test_ecc);
+ #endif
+--- a/fs/yaffs2/yaffs_fs.c
++++ b/fs/yaffs2/yaffs_fs.c
+@@ -1,7 +1,7 @@
+ /*
+  * YAFFS: Yet Another Flash File System. A NAND-flash specific file system.
+  *
+- * Copyright (C) 2002-2007 Aleph One Ltd.
++ * Copyright (C) 2002-2009 Aleph One Ltd.
+  *   for Toby Churchill Ltd and Brightstar Engineering
+  *
+  * Created by Charles Manning <charles@aleph1.co.uk>
+@@ -32,18 +32,17 @@
+  */
+ 
+ const char *yaffs_fs_c_version =
+-    "$Id: yaffs_fs.c,v 1.63 2007-09-19 20:35:40 imcd Exp $";
++    "$Id: yaffs_fs.c,v 1.79 2009-03-17 01:12:00 wookey Exp $";
+ extern const char *yaffs_guts_c_version;
+ 
+ #include <linux/version.h>
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19))
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 19))
+ #include <linux/config.h>
+ #endif
+ #include <linux/kernel.h>
+ #include <linux/module.h>
+ #include <linux/slab.h>
+ #include <linux/init.h>
+-#include <linux/list.h>
+ #include <linux/fs.h>
+ #include <linux/proc_fs.h>
+ #include <linux/smp_lock.h>
+@@ -53,10 +52,12 @@ extern const char *yaffs_guts_c_version;
+ #include <linux/string.h>
+ #include <linux/ctype.h>
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#include "asm/div64.h"
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 
+ #include <linux/statfs.h>	/* Added NCB 15-8-2003 */
+-#include <asm/statfs.h>
++#include <linux/statfs.h>
+ #define UnlockPage(p) unlock_page(p)
+ #define Page_Uptodate(page)	test_bit(PG_uptodate, &(page)->flags)
+ 
+@@ -69,22 +70,45 @@ extern const char *yaffs_guts_c_version;
+ #define	BDEVNAME_SIZE		0
+ #define	yaffs_devname(sb, buf)	kdevname(sb->s_dev)
+ 
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 5, 0))
+ /* added NCB 26/5/2006 for 2.4.25-vrs2-tcl1 kernel */
+ #define __user
+ #endif
+ 
+ #endif
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 26))
++#define YPROC_ROOT  (&proc_root)
++#else
++#define YPROC_ROOT  NULL
++#endif
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ #define WRITE_SIZE_STR "writesize"
+-#define WRITE_SIZE(mtd) (mtd)->writesize
++#define WRITE_SIZE(mtd) ((mtd)->writesize)
+ #else
+ #define WRITE_SIZE_STR "oobblock"
+-#define WRITE_SIZE(mtd) (mtd)->oobblock
++#define WRITE_SIZE(mtd) ((mtd)->oobblock)
+ #endif
+ 
+-#include <asm/uaccess.h>
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 27))
++#define YAFFS_USE_WRITE_BEGIN_END 1
++#else
++#define YAFFS_USE_WRITE_BEGIN_END 0
++#endif
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 28))
++static uint32_t YCALCBLOCKS(uint64_t partition_size, uint32_t block_size)
++{
++	uint64_t result = partition_size;
++	do_div(result, block_size);
++	return (uint32_t)result;
++}
++#else
++#define YCALCBLOCKS(s, b) ((s)/(b))
++#endif
++
++#include <linux/uaccess.h>
+ 
+ #include "yportenv.h"
+ #include "yaffs_guts.h"
+@@ -96,28 +120,44 @@ extern const char *yaffs_guts_c_version;
+ 
+ unsigned int yaffs_traceMask = YAFFS_TRACE_BAD_BLOCKS;
+ unsigned int yaffs_wr_attempts = YAFFS_WR_ATTEMPTS;
++unsigned int yaffs_auto_checkpoint = 1;
+ 
+ /* Module Parameters */
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+-module_param(yaffs_traceMask,uint,0644);
+-module_param(yaffs_wr_attempts,uint,0644);
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
++module_param(yaffs_traceMask, uint, 0644);
++module_param(yaffs_wr_attempts, uint, 0644);
++module_param(yaffs_auto_checkpoint, uint, 0644);
++#else
++MODULE_PARM(yaffs_traceMask, "i");
++MODULE_PARM(yaffs_wr_attempts, "i");
++MODULE_PARM(yaffs_auto_checkpoint, "i");
++#endif
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 25))
++/* use iget and read_inode */
++#define Y_IGET(sb, inum) iget((sb), (inum))
++static void yaffs_read_inode(struct inode *inode);
++
+ #else
+-MODULE_PARM(yaffs_traceMask,"i");
+-MODULE_PARM(yaffs_wr_attempts,"i");
++/* Call local equivalent */
++#define YAFFS_USE_OWN_IGET
++#define Y_IGET(sb, inum) yaffs_iget((sb), (inum))
++
++static struct inode *yaffs_iget(struct super_block *sb, unsigned long ino);
+ #endif
+ 
+ /*#define T(x) printk x */
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18))
+-#define yaffs_InodeToObjectLV(iptr) (iptr)->i_private
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 18))
++#define yaffs_InodeToObjectLV(iptr) ((iptr)->i_private)
+ #else
+-#define yaffs_InodeToObjectLV(iptr) (iptr)->u.generic_ip
++#define yaffs_InodeToObjectLV(iptr) ((iptr)->u.generic_ip)
+ #endif
+ 
+ #define yaffs_InodeToObject(iptr) ((yaffs_Object *)(yaffs_InodeToObjectLV(iptr)))
+ #define yaffs_DentryToObject(dptr) yaffs_InodeToObject((dptr)->d_inode)
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ #define yaffs_SuperToDevice(sb)	((yaffs_Device *)sb->s_fs_info)
+ #else
+ #define yaffs_SuperToDevice(sb)	((yaffs_Device *)sb->u.generic_sbp)
+@@ -126,47 +166,49 @@ MODULE_PARM(yaffs_wr_attempts,"i");
+ static void yaffs_put_super(struct super_block *sb);
+ 
+ static ssize_t yaffs_file_write(struct file *f, const char *buf, size_t n,
+-				loff_t * pos);
++				loff_t *pos);
++static ssize_t yaffs_hold_space(struct file *f);
++static void yaffs_release_space(struct file *f);
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_file_flush(struct file *file, fl_owner_t id);
+ #else
+ static int yaffs_file_flush(struct file *file);
+ #endif
+ 
+ static int yaffs_sync_object(struct file *file, struct dentry *dentry,
+-			     int datasync);
++				int datasync);
+ 
+ static int yaffs_readdir(struct file *f, void *dirent, filldir_t filldir);
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode,
+ 			struct nameidata *n);
+ static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry,
+-				   struct nameidata *n);
++					struct nameidata *n);
+ #else
+ static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode);
+ static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry);
+ #endif
+ static int yaffs_link(struct dentry *old_dentry, struct inode *dir,
+-		      struct dentry *dentry);
++			struct dentry *dentry);
+ static int yaffs_unlink(struct inode *dir, struct dentry *dentry);
+ static int yaffs_symlink(struct inode *dir, struct dentry *dentry,
+-			 const char *symname);
++			const char *symname);
+ static int yaffs_mkdir(struct inode *dir, struct dentry *dentry, int mode);
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode,
+-		       dev_t dev);
++			dev_t dev);
+ #else
+ static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode,
+-		       int dev);
++			int dev);
+ #endif
+ static int yaffs_rename(struct inode *old_dir, struct dentry *old_dentry,
+ 			struct inode *new_dir, struct dentry *new_dentry);
+ static int yaffs_setattr(struct dentry *dentry, struct iattr *attr);
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_sync_fs(struct super_block *sb, int wait);
+ static void yaffs_write_super(struct super_block *sb);
+ #else
+@@ -174,33 +216,47 @@ static int yaffs_sync_fs(struct super_bl
+ static int yaffs_write_super(struct super_block *sb);
+ #endif
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_statfs(struct dentry *dentry, struct kstatfs *buf);
+-#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_statfs(struct super_block *sb, struct kstatfs *buf);
+ #else
+ static int yaffs_statfs(struct super_block *sb, struct statfs *buf);
+ #endif
+-static void yaffs_read_inode(struct inode *inode);
+ 
++#ifdef YAFFS_HAS_PUT_INODE
+ static void yaffs_put_inode(struct inode *inode);
++#endif
++
+ static void yaffs_delete_inode(struct inode *);
+ static void yaffs_clear_inode(struct inode *);
+ 
+ static int yaffs_readpage(struct file *file, struct page *page);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_writepage(struct page *page, struct writeback_control *wbc);
+ #else
+ static int yaffs_writepage(struct page *page);
+ #endif
++
++
++#if (YAFFS_USE_WRITE_BEGIN_END != 0)
++static int yaffs_write_begin(struct file *filp, struct address_space *mapping,
++				loff_t pos, unsigned len, unsigned flags,
++				struct page **pagep, void **fsdata);
++static int yaffs_write_end(struct file *filp, struct address_space *mapping,
++				loff_t pos, unsigned len, unsigned copied,
++				struct page *pg, void *fsdadata);
++#else
+ static int yaffs_prepare_write(struct file *f, struct page *pg,
+-			       unsigned offset, unsigned to);
++				unsigned offset, unsigned to);
+ static int yaffs_commit_write(struct file *f, struct page *pg, unsigned offset,
+-			      unsigned to);
++				unsigned to);
+ 
+-static int yaffs_readlink(struct dentry *dentry, char __user * buffer,
+-			  int buflen);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
++#endif
++
++static int yaffs_readlink(struct dentry *dentry, char __user *buffer,
++				int buflen);
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 13))
+ static void *yaffs_follow_link(struct dentry *dentry, struct nameidata *nd);
+ #else
+ static int yaffs_follow_link(struct dentry *dentry, struct nameidata *nd);
+@@ -209,12 +265,17 @@ static int yaffs_follow_link(struct dent
+ static struct address_space_operations yaffs_file_address_operations = {
+ 	.readpage = yaffs_readpage,
+ 	.writepage = yaffs_writepage,
++#if (YAFFS_USE_WRITE_BEGIN_END > 0)
++	.write_begin = yaffs_write_begin,
++	.write_end = yaffs_write_end,
++#else
+ 	.prepare_write = yaffs_prepare_write,
+ 	.commit_write = yaffs_commit_write,
++#endif
+ };
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,22))
+-static struct file_operations yaffs_file_operations = {
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 22))
++static const struct file_operations yaffs_file_operations = {
+ 	.read = do_sync_read,
+ 	.write = do_sync_write,
+ 	.aio_read = generic_file_aio_read,
+@@ -224,11 +285,12 @@ static struct file_operations yaffs_file
+ 	.fsync = yaffs_sync_object,
+ 	.splice_read = generic_file_splice_read,
+ 	.splice_write = generic_file_splice_write,
++	.llseek = generic_file_llseek,
+ };
+ 
+-#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18))
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 18))
+ 
+-static struct file_operations yaffs_file_operations = {
++static const struct file_operations yaffs_file_operations = {
+ 	.read = do_sync_read,
+ 	.write = do_sync_write,
+ 	.aio_read = generic_file_aio_read,
+@@ -241,29 +303,29 @@ static struct file_operations yaffs_file
+ 
+ #else
+ 
+-static struct file_operations yaffs_file_operations = {
++static const struct file_operations yaffs_file_operations = {
+ 	.read = generic_file_read,
+ 	.write = generic_file_write,
+ 	.mmap = generic_file_mmap,
+ 	.flush = yaffs_file_flush,
+ 	.fsync = yaffs_sync_object,
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 	.sendfile = generic_file_sendfile,
+ #endif
+ };
+ #endif
+ 
+-static struct inode_operations yaffs_file_inode_operations = {
++static const struct inode_operations yaffs_file_inode_operations = {
+ 	.setattr = yaffs_setattr,
+ };
+ 
+-static struct inode_operations yaffs_symlink_inode_operations = {
++static const struct inode_operations yaffs_symlink_inode_operations = {
+ 	.readlink = yaffs_readlink,
+ 	.follow_link = yaffs_follow_link,
+ 	.setattr = yaffs_setattr,
+ };
+ 
+-static struct inode_operations yaffs_dir_inode_operations = {
++static const struct inode_operations yaffs_dir_inode_operations = {
+ 	.create = yaffs_create,
+ 	.lookup = yaffs_lookup,
+ 	.link = yaffs_link,
+@@ -276,16 +338,21 @@ static struct inode_operations yaffs_dir
+ 	.setattr = yaffs_setattr,
+ };
+ 
+-static struct file_operations yaffs_dir_operations = {
++static const struct file_operations yaffs_dir_operations = {
+ 	.read = generic_read_dir,
+ 	.readdir = yaffs_readdir,
+ 	.fsync = yaffs_sync_object,
+ };
+ 
+-static struct super_operations yaffs_super_ops = {
++static const struct super_operations yaffs_super_ops = {
+ 	.statfs = yaffs_statfs,
++
++#ifndef YAFFS_USE_OWN_IGET
+ 	.read_inode = yaffs_read_inode,
++#endif
++#ifdef YAFFS_HAS_PUT_INODE
+ 	.put_inode = yaffs_put_inode,
++#endif
+ 	.put_super = yaffs_put_super,
+ 	.delete_inode = yaffs_delete_inode,
+ 	.clear_inode = yaffs_clear_inode,
+@@ -293,22 +360,21 @@ static struct super_operations yaffs_sup
+ 	.write_super = yaffs_write_super,
+ };
+ 
+-static void yaffs_GrossLock(yaffs_Device * dev)
++static void yaffs_GrossLock(yaffs_Device *dev)
+ {
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs locking\n"));
+-
++	T(YAFFS_TRACE_OS, ("yaffs locking %p\n", current));
+ 	down(&dev->grossLock);
++	T(YAFFS_TRACE_OS, ("yaffs locked %p\n", current));
+ }
+ 
+-static void yaffs_GrossUnlock(yaffs_Device * dev)
++static void yaffs_GrossUnlock(yaffs_Device *dev)
+ {
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs unlocking\n"));
++	T(YAFFS_TRACE_OS, ("yaffs unlocking %p\n", current));
+ 	up(&dev->grossLock);
+-
+ }
+ 
+-static int yaffs_readlink(struct dentry *dentry, char __user * buffer,
+-			  int buflen)
++static int yaffs_readlink(struct dentry *dentry, char __user *buffer,
++			int buflen)
+ {
+ 	unsigned char *alias;
+ 	int ret;
+@@ -329,7 +395,7 @@ static int yaffs_readlink(struct dentry 
+ 	return ret;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 13))
+ static void *yaffs_follow_link(struct dentry *dentry, struct nameidata *nd)
+ #else
+ static int yaffs_follow_link(struct dentry *dentry, struct nameidata *nd)
+@@ -345,32 +411,31 @@ static int yaffs_follow_link(struct dent
+ 
+ 	yaffs_GrossUnlock(dev);
+ 
+-	if (!alias)
+-        {
++	if (!alias) {
+ 		ret = -ENOMEM;
+ 		goto out;
+-        }
++	}
+ 
+ 	ret = vfs_follow_link(nd, alias);
+ 	kfree(alias);
+ out:
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
+-	return ERR_PTR (ret);
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 13))
++	return ERR_PTR(ret);
+ #else
+ 	return ret;
+ #endif
+ }
+ 
+ struct inode *yaffs_get_inode(struct super_block *sb, int mode, int dev,
+-			      yaffs_Object * obj);
++				yaffs_Object *obj);
+ 
+ /*
+  * Lookup is used to find objects in the fs
+  */
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 
+ static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry,
+-				   struct nameidata *n)
++				struct nameidata *n)
+ #else
+ static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry)
+ #endif
+@@ -383,12 +448,11 @@ static struct dentry *yaffs_lookup(struc
+ 	yaffs_GrossLock(dev);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_lookup for %d:%s\n",
+-	   yaffs_InodeToObject(dir)->objectId, dentry->d_name.name));
++		("yaffs_lookup for %d:%s\n",
++		yaffs_InodeToObject(dir)->objectId, dentry->d_name.name));
+ 
+-	obj =
+-	    yaffs_FindObjectByName(yaffs_InodeToObject(dir),
+-				   dentry->d_name.name);
++	obj = yaffs_FindObjectByName(yaffs_InodeToObject(dir),
++					dentry->d_name.name);
+ 
+ 	obj = yaffs_GetEquivalentObject(obj);	/* in case it was a hardlink */
+ 
+@@ -397,13 +461,13 @@ static struct dentry *yaffs_lookup(struc
+ 
+ 	if (obj) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_lookup found %d\n", obj->objectId));
++			("yaffs_lookup found %d\n", obj->objectId));
+ 
+ 		inode = yaffs_get_inode(dir->i_sb, obj->yst_mode, 0, obj);
+ 
+ 		if (inode) {
+ 			T(YAFFS_TRACE_OS,
+-			  (KERN_DEBUG "yaffs_loookup dentry \n"));
++				("yaffs_loookup dentry \n"));
+ /* #if 0 asserted by NCB for 2.5/6 compatability - falls through to
+  * d_add even if NULL inode */
+ #if 0
+@@ -416,7 +480,7 @@ static struct dentry *yaffs_lookup(struc
+ 		}
+ 
+ 	} else {
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_lookup not found\n"));
++		T(YAFFS_TRACE_OS, ("yaffs_lookup not found\n"));
+ 
+ 	}
+ 
+@@ -425,20 +489,22 @@ static struct dentry *yaffs_lookup(struc
+ 	d_add(dentry, inode);
+ 
+ 	return NULL;
+-	/*      return (ERR_PTR(-EIO)); */
+-
+ }
+ 
++
++#ifdef YAFFS_HAS_PUT_INODE
++
+ /* For now put inode is just for debugging
+  * Put inode is called when the inode **structure** is put.
+  */
+ static void yaffs_put_inode(struct inode *inode)
+ {
+ 	T(YAFFS_TRACE_OS,
+-	  ("yaffs_put_inode: ino %d, count %d\n", (int)inode->i_ino,
+-	   atomic_read(&inode->i_count)));
++		("yaffs_put_inode: ino %d, count %d\n", (int)inode->i_ino,
++		atomic_read(&inode->i_count)));
+ 
+ }
++#endif
+ 
+ /* clear is called to tell the fs to release any per-inode data it holds */
+ static void yaffs_clear_inode(struct inode *inode)
+@@ -449,9 +515,9 @@ static void yaffs_clear_inode(struct ino
+ 	obj = yaffs_InodeToObject(inode);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  ("yaffs_clear_inode: ino %d, count %d %s\n", (int)inode->i_ino,
+-	   atomic_read(&inode->i_count),
+-	   obj ? "object exists" : "null object"));
++		("yaffs_clear_inode: ino %d, count %d %s\n", (int)inode->i_ino,
++		atomic_read(&inode->i_count),
++		obj ? "object exists" : "null object"));
+ 
+ 	if (obj) {
+ 		dev = obj->myDev;
+@@ -486,23 +552,23 @@ static void yaffs_delete_inode(struct in
+ 	yaffs_Device *dev;
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  ("yaffs_delete_inode: ino %d, count %d %s\n", (int)inode->i_ino,
+-	   atomic_read(&inode->i_count),
+-	   obj ? "object exists" : "null object"));
++		("yaffs_delete_inode: ino %d, count %d %s\n", (int)inode->i_ino,
++		atomic_read(&inode->i_count),
++		obj ? "object exists" : "null object"));
+ 
+ 	if (obj) {
+ 		dev = obj->myDev;
+ 		yaffs_GrossLock(dev);
+-		yaffs_DeleteFile(obj);
++		yaffs_DeleteObject(obj);
+ 		yaffs_GrossUnlock(dev);
+ 	}
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
+-        truncate_inode_pages (&inode->i_data, 0);
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 13))
++	truncate_inode_pages(&inode->i_data, 0);
+ #endif
+ 	clear_inode(inode);
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_file_flush(struct file *file, fl_owner_t id)
+ #else
+ static int yaffs_file_flush(struct file *file)
+@@ -513,8 +579,8 @@ static int yaffs_file_flush(struct file 
+ 	yaffs_Device *dev = obj->myDev;
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_file_flush object %d (%s)\n", obj->objectId,
+-	   obj->dirty ? "dirty" : "clean"));
++		("yaffs_file_flush object %d (%s)\n", obj->objectId,
++		obj->dirty ? "dirty" : "clean"));
+ 
+ 	yaffs_GrossLock(dev);
+ 
+@@ -535,15 +601,15 @@ static int yaffs_readpage_nolock(struct 
+ 
+ 	yaffs_Device *dev;
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_readpage at %08x, size %08x\n",
+-			   (unsigned)(pg->index << PAGE_CACHE_SHIFT),
+-			   (unsigned)PAGE_CACHE_SIZE));
++	T(YAFFS_TRACE_OS, ("yaffs_readpage at %08x, size %08x\n",
++			(unsigned)(pg->index << PAGE_CACHE_SHIFT),
++			(unsigned)PAGE_CACHE_SIZE));
+ 
+ 	obj = yaffs_DentryToObject(f->f_dentry);
+ 
+ 	dev = obj->myDev;
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 	BUG_ON(!PageLocked(pg));
+ #else
+ 	if (!PageLocked(pg))
+@@ -555,9 +621,9 @@ static int yaffs_readpage_nolock(struct 
+ 
+ 	yaffs_GrossLock(dev);
+ 
+-	ret =
+-	    yaffs_ReadDataFromFile(obj, pg_buf, pg->index << PAGE_CACHE_SHIFT,
+-				   PAGE_CACHE_SIZE);
++	ret = yaffs_ReadDataFromFile(obj, pg_buf,
++				pg->index << PAGE_CACHE_SHIFT,
++				PAGE_CACHE_SIZE);
+ 
+ 	yaffs_GrossUnlock(dev);
+ 
+@@ -575,7 +641,7 @@ static int yaffs_readpage_nolock(struct 
+ 	flush_dcache_page(pg);
+ 	kunmap(pg);
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_readpage done\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_readpage done\n"));
+ 	return ret;
+ }
+ 
+@@ -593,7 +659,7 @@ static int yaffs_readpage(struct file *f
+ 
+ /* writepage inspired by/stolen from smbfs */
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_writepage(struct page *page, struct writeback_control *wbc)
+ #else
+ static int yaffs_writepage(struct page *page)
+@@ -616,12 +682,11 @@ static int yaffs_writepage(struct page *
+ 
+ 	if (offset > inode->i_size) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG
+-		   "yaffs_writepage at %08x, inode size = %08x!!!\n",
+-		   (unsigned)(page->index << PAGE_CACHE_SHIFT),
+-		   (unsigned)inode->i_size));
++			("yaffs_writepage at %08x, inode size = %08x!!!\n",
++			(unsigned)(page->index << PAGE_CACHE_SHIFT),
++			(unsigned)inode->i_size));
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "                -> don't care!!\n"));
++			("                -> don't care!!\n"));
+ 		unlock_page(page);
+ 		return 0;
+ 	}
+@@ -629,11 +694,10 @@ static int yaffs_writepage(struct page *
+ 	end_index = inode->i_size >> PAGE_CACHE_SHIFT;
+ 
+ 	/* easy case */
+-	if (page->index < end_index) {
++	if (page->index < end_index)
+ 		nBytes = PAGE_CACHE_SIZE;
+-	} else {
++	else
+ 		nBytes = inode->i_size & (PAGE_CACHE_SIZE - 1);
+-	}
+ 
+ 	get_page(page);
+ 
+@@ -643,19 +707,18 @@ static int yaffs_writepage(struct page *
+ 	yaffs_GrossLock(obj->myDev);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_writepage at %08x, size %08x\n",
+-	   (unsigned)(page->index << PAGE_CACHE_SHIFT), nBytes));
++		("yaffs_writepage at %08x, size %08x\n",
++		(unsigned)(page->index << PAGE_CACHE_SHIFT), nBytes));
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "writepag0: obj = %05x, ino = %05x\n",
+-	   (int)obj->variant.fileVariant.fileSize, (int)inode->i_size));
++		("writepag0: obj = %05x, ino = %05x\n",
++		(int)obj->variant.fileVariant.fileSize, (int)inode->i_size));
+ 
+-	nWritten =
+-	    yaffs_WriteDataToFile(obj, buffer, page->index << PAGE_CACHE_SHIFT,
+-				  nBytes, 0);
++	nWritten = yaffs_WriteDataToFile(obj, buffer,
++			page->index << PAGE_CACHE_SHIFT, nBytes, 0);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "writepag1: obj = %05x, ino = %05x\n",
+-	   (int)obj->variant.fileVariant.fileSize, (int)inode->i_size));
++		("writepag1: obj = %05x, ino = %05x\n",
++		(int)obj->variant.fileVariant.fileSize, (int)inode->i_size));
+ 
+ 	yaffs_GrossUnlock(obj->myDev);
+ 
+@@ -667,100 +730,207 @@ static int yaffs_writepage(struct page *
+ 	return (nWritten == nBytes) ? 0 : -ENOSPC;
+ }
+ 
++
++#if (YAFFS_USE_WRITE_BEGIN_END > 0)
++static int yaffs_write_begin(struct file *filp, struct address_space *mapping,
++				loff_t pos, unsigned len, unsigned flags,
++				struct page **pagep, void **fsdata)
++{
++	struct page *pg = NULL;
++	pgoff_t index = pos >> PAGE_CACHE_SHIFT;
++	uint32_t offset = pos & (PAGE_CACHE_SIZE - 1);
++	uint32_t to = offset + len;
++
++	int ret = 0;
++	int space_held = 0;
++
++	T(YAFFS_TRACE_OS, ("start yaffs_write_begin\n"));
++	/* Get a page */
++#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 28)
++	pg = grab_cache_page_write_begin(mapping, index, flags);
++#else
++	pg = __grab_cache_page(mapping, index);
++#endif
++
++	*pagep = pg;
++	if (!pg) {
++		ret =  -ENOMEM;
++		goto out;
++	}
++	/* Get fs space */
++	space_held = yaffs_hold_space(filp);
++
++	if (!space_held) {
++		ret = -ENOSPC;
++		goto out;
++	}
++
++	/* Update page if required */
++
++	if (!Page_Uptodate(pg) && (offset || to < PAGE_CACHE_SIZE))
++		ret = yaffs_readpage_nolock(filp, pg);
++
++	if (ret)
++		goto out;
++
++	/* Happy path return */
++	T(YAFFS_TRACE_OS, ("end yaffs_write_begin - ok\n"));
++
++	return 0;
++
++out:
++	T(YAFFS_TRACE_OS, ("end yaffs_write_begin fail returning %d\n", ret));
++	if (space_held)
++		yaffs_release_space(filp);
++	if (pg) {
++		unlock_page(pg);
++		page_cache_release(pg);
++	}
++	return ret;
++}
++
++#else
++
+ static int yaffs_prepare_write(struct file *f, struct page *pg,
+-			       unsigned offset, unsigned to)
++				unsigned offset, unsigned to)
+ {
++	T(YAFFS_TRACE_OS, ("yaffs_prepair_write\n"));
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_prepair_write\n"));
+ 	if (!Page_Uptodate(pg) && (offset || to < PAGE_CACHE_SIZE))
+ 		return yaffs_readpage_nolock(f, pg);
+-
+ 	return 0;
++}
++#endif
++
++#if (YAFFS_USE_WRITE_BEGIN_END > 0)
++static int yaffs_write_end(struct file *filp, struct address_space *mapping,
++				loff_t pos, unsigned len, unsigned copied,
++				struct page *pg, void *fsdadata)
++{
++	int ret = 0;
++	void *addr, *kva;
++	uint32_t offset_into_page = pos & (PAGE_CACHE_SIZE - 1);
++
++	kva = kmap(pg);
++	addr = kva + offset_into_page;
++
++	T(YAFFS_TRACE_OS,
++		("yaffs_write_end addr %x pos %x nBytes %d\n",
++		(unsigned) addr,
++		(int)pos, copied));
++
++	ret = yaffs_file_write(filp, addr, copied, &pos);
++
++	if (ret != copied) {
++		T(YAFFS_TRACE_OS,
++			("yaffs_write_end not same size ret %d  copied %d\n",
++			ret, copied));
++		SetPageError(pg);
++		ClearPageUptodate(pg);
++	} else {
++		SetPageUptodate(pg);
++	}
++
++	kunmap(pg);
+ 
++	yaffs_release_space(filp);
++	unlock_page(pg);
++	page_cache_release(pg);
++	return ret;
+ }
++#else
+ 
+ static int yaffs_commit_write(struct file *f, struct page *pg, unsigned offset,
+-			      unsigned to)
++				unsigned to)
+ {
++	void *addr, *kva;
+ 
+-	void *addr = page_address(pg) + offset;
+ 	loff_t pos = (((loff_t) pg->index) << PAGE_CACHE_SHIFT) + offset;
+ 	int nBytes = to - offset;
+ 	int nWritten;
+ 
+ 	unsigned spos = pos;
+-	unsigned saddr = (unsigned)addr;
++	unsigned saddr;
++
++	kva = kmap(pg);
++	addr = kva + offset;
++
++	saddr = (unsigned) addr;
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_commit_write addr %x pos %x nBytes %d\n", saddr,
+-	   spos, nBytes));
++		("yaffs_commit_write addr %x pos %x nBytes %d\n",
++		saddr, spos, nBytes));
+ 
+ 	nWritten = yaffs_file_write(f, addr, nBytes, &pos);
+ 
+ 	if (nWritten != nBytes) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG
+-		   "yaffs_commit_write not same size nWritten %d  nBytes %d\n",
+-		   nWritten, nBytes));
++			("yaffs_commit_write not same size nWritten %d  nBytes %d\n",
++			nWritten, nBytes));
+ 		SetPageError(pg);
+ 		ClearPageUptodate(pg);
+ 	} else {
+ 		SetPageUptodate(pg);
+ 	}
+ 
++	kunmap(pg);
++
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_commit_write returning %d\n",
+-	   nWritten == nBytes ? 0 : nWritten));
++		("yaffs_commit_write returning %d\n",
++		nWritten == nBytes ? 0 : nWritten));
+ 
+ 	return nWritten == nBytes ? 0 : nWritten;
+-
+ }
++#endif
++
+ 
+-static void yaffs_FillInodeFromObject(struct inode *inode, yaffs_Object * obj)
++static void yaffs_FillInodeFromObject(struct inode *inode, yaffs_Object *obj)
+ {
+ 	if (inode && obj) {
+ 
+ 
+ 		/* Check mode against the variant type and attempt to repair if broken. */
+- 		__u32 mode = obj->yst_mode;
+- 		switch( obj->variantType ){
+- 		case YAFFS_OBJECT_TYPE_FILE :
+- 		        if( ! S_ISREG(mode) ){
+- 			        obj->yst_mode &= ~S_IFMT;
+- 			        obj->yst_mode |= S_IFREG;
+- 			}
+-
+- 			break;
+- 		case YAFFS_OBJECT_TYPE_SYMLINK :
+- 		        if( ! S_ISLNK(mode) ){
+- 			        obj->yst_mode &= ~S_IFMT;
+- 				obj->yst_mode |= S_IFLNK;
+- 			}
+-
+- 			break;
+- 		case YAFFS_OBJECT_TYPE_DIRECTORY :
+- 		        if( ! S_ISDIR(mode) ){
+- 			        obj->yst_mode &= ~S_IFMT;
+- 			        obj->yst_mode |= S_IFDIR;
+- 			}
+-
+- 			break;
+- 		case YAFFS_OBJECT_TYPE_UNKNOWN :
+- 		case YAFFS_OBJECT_TYPE_HARDLINK :
+- 		case YAFFS_OBJECT_TYPE_SPECIAL :
+- 		default:
+- 		        /* TODO? */
+- 		        break;
+- 		}
++		__u32 mode = obj->yst_mode;
++		switch (obj->variantType) {
++		case YAFFS_OBJECT_TYPE_FILE:
++			if (!S_ISREG(mode)) {
++				obj->yst_mode &= ~S_IFMT;
++				obj->yst_mode |= S_IFREG;
++			}
++
++			break;
++		case YAFFS_OBJECT_TYPE_SYMLINK:
++			if (!S_ISLNK(mode)) {
++				obj->yst_mode &= ~S_IFMT;
++				obj->yst_mode |= S_IFLNK;
++			}
++
++			break;
++		case YAFFS_OBJECT_TYPE_DIRECTORY:
++			if (!S_ISDIR(mode)) {
++				obj->yst_mode &= ~S_IFMT;
++				obj->yst_mode |= S_IFDIR;
++			}
++
++			break;
++		case YAFFS_OBJECT_TYPE_UNKNOWN:
++		case YAFFS_OBJECT_TYPE_HARDLINK:
++		case YAFFS_OBJECT_TYPE_SPECIAL:
++		default:
++			/* TODO? */
++			break;
++		}
++
++		inode->i_flags |= S_NOATIME;
+ 
+ 		inode->i_ino = obj->objectId;
+ 		inode->i_mode = obj->yst_mode;
+ 		inode->i_uid = obj->yst_uid;
+ 		inode->i_gid = obj->yst_gid;
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19))
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 19))
+ 		inode->i_blksize = inode->i_sb->s_blocksize;
+ #endif
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 
+ 		inode->i_rdev = old_decode_dev(obj->yst_rdev);
+ 		inode->i_atime.tv_sec = (time_t) (obj->yst_atime);
+@@ -781,26 +951,25 @@ static void yaffs_FillInodeFromObject(st
+ 		inode->i_nlink = yaffs_GetObjectLinkCount(obj);
+ 
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG
+-		   "yaffs_FillInode mode %x uid %d gid %d size %d count %d\n",
+-		   inode->i_mode, inode->i_uid, inode->i_gid,
+-		   (int)inode->i_size, atomic_read(&inode->i_count)));
++			("yaffs_FillInode mode %x uid %d gid %d size %d count %d\n",
++			inode->i_mode, inode->i_uid, inode->i_gid,
++			(int)inode->i_size, atomic_read(&inode->i_count)));
+ 
+ 		switch (obj->yst_mode & S_IFMT) {
+ 		default:	/* fifo, device or socket */
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 			init_special_inode(inode, obj->yst_mode,
+-					   old_decode_dev(obj->yst_rdev));
++					old_decode_dev(obj->yst_rdev));
+ #else
+ 			init_special_inode(inode, obj->yst_mode,
+-					   (dev_t) (obj->yst_rdev));
++					(dev_t) (obj->yst_rdev));
+ #endif
+ 			break;
+ 		case S_IFREG:	/* file */
+ 			inode->i_op = &yaffs_file_inode_operations;
+ 			inode->i_fop = &yaffs_file_operations;
+ 			inode->i_mapping->a_ops =
+-			    &yaffs_file_address_operations;
++				&yaffs_file_address_operations;
+ 			break;
+ 		case S_IFDIR:	/* directory */
+ 			inode->i_op = &yaffs_dir_inode_operations;
+@@ -817,34 +986,36 @@ static void yaffs_FillInodeFromObject(st
+ 
+ 	} else {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_FileInode invalid parameters\n"));
++			("yaffs_FileInode invalid parameters\n"));
+ 	}
+ 
+ }
+ 
+ struct inode *yaffs_get_inode(struct super_block *sb, int mode, int dev,
+-			      yaffs_Object * obj)
++				yaffs_Object *obj)
+ {
+ 	struct inode *inode;
+ 
+ 	if (!sb) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_get_inode for NULL super_block!!\n"));
++			("yaffs_get_inode for NULL super_block!!\n"));
+ 		return NULL;
+ 
+ 	}
+ 
+ 	if (!obj) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_get_inode for NULL object!!\n"));
++			("yaffs_get_inode for NULL object!!\n"));
+ 		return NULL;
+ 
+ 	}
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_get_inode for object %d\n", obj->objectId));
++		("yaffs_get_inode for object %d\n", obj->objectId));
+ 
+-	inode = iget(sb, obj->objectId);
++	inode = Y_IGET(sb, obj->objectId);
++	if (IS_ERR(inode))
++		return NULL;
+ 
+ 	/* NB Side effect: iget calls back to yaffs_read_inode(). */
+ 	/* iget also increments the inode's i_count */
+@@ -854,7 +1025,7 @@ struct inode *yaffs_get_inode(struct sup
+ }
+ 
+ static ssize_t yaffs_file_write(struct file *f, const char *buf, size_t n,
+-				loff_t * pos)
++				loff_t *pos)
+ {
+ 	yaffs_Object *obj;
+ 	int nWritten, ipos;
+@@ -869,28 +1040,26 @@ static ssize_t yaffs_file_write(struct f
+ 
+ 	inode = f->f_dentry->d_inode;
+ 
+-	if (!S_ISBLK(inode->i_mode) && f->f_flags & O_APPEND) {
++	if (!S_ISBLK(inode->i_mode) && f->f_flags & O_APPEND)
+ 		ipos = inode->i_size;
+-	} else {
++	else
+ 		ipos = *pos;
+-	}
+ 
+-	if (!obj) {
++	if (!obj)
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_file_write: hey obj is null!\n"));
+-	} else {
++			("yaffs_file_write: hey obj is null!\n"));
++	else
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG
+-		   "yaffs_file_write about to write writing %d bytes"
+-		   "to object %d at %d\n",
+-		   n, obj->objectId, ipos));
+-	}
++			("yaffs_file_write about to write writing %zu bytes"
++			"to object %d at %d\n",
++			n, obj->objectId, ipos));
+ 
+ 	nWritten = yaffs_WriteDataToFile(obj, buf, ipos, n, 0);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_file_write writing %d bytes, %d written at %d\n",
+-	   n, nWritten, ipos));
++		("yaffs_file_write writing %zu bytes, %d written at %d\n",
++		n, nWritten, ipos));
++
+ 	if (nWritten > 0) {
+ 		ipos += nWritten;
+ 		*pos = ipos;
+@@ -899,10 +1068,9 @@ static ssize_t yaffs_file_write(struct f
+ 			inode->i_blocks = (ipos + 511) >> 9;
+ 
+ 			T(YAFFS_TRACE_OS,
+-			  (KERN_DEBUG
+-			   "yaffs_file_write size updated to %d bytes, "
+-			   "%d blocks\n",
+-			   ipos, (int)(inode->i_blocks)));
++				("yaffs_file_write size updated to %d bytes, "
++				"%d blocks\n",
++				ipos, (int)(inode->i_blocks)));
+ 		}
+ 
+ 	}
+@@ -910,13 +1078,54 @@ static ssize_t yaffs_file_write(struct f
+ 	return nWritten == 0 ? -ENOSPC : nWritten;
+ }
+ 
++/* Space holding and freeing is done to ensure we have space available for write_begin/end */
++/* For now we just assume few parallel writes and check against a small number. */
++/* Todo: need to do this with a counter to handle parallel reads better */
++
++static ssize_t yaffs_hold_space(struct file *f)
++{
++	yaffs_Object *obj;
++	yaffs_Device *dev;
++
++	int nFreeChunks;
++
++
++	obj = yaffs_DentryToObject(f->f_dentry);
++
++	dev = obj->myDev;
++
++	yaffs_GrossLock(dev);
++
++	nFreeChunks = yaffs_GetNumberOfFreeChunks(dev);
++
++	yaffs_GrossUnlock(dev);
++
++	return (nFreeChunks > 20) ? 1 : 0;
++}
++
++static void yaffs_release_space(struct file *f)
++{
++	yaffs_Object *obj;
++	yaffs_Device *dev;
++
++
++	obj = yaffs_DentryToObject(f->f_dentry);
++
++	dev = obj->myDev;
++
++	yaffs_GrossLock(dev);
++
++
++	yaffs_GrossUnlock(dev);
++}
++
+ static int yaffs_readdir(struct file *f, void *dirent, filldir_t filldir)
+ {
+ 	yaffs_Object *obj;
+ 	yaffs_Device *dev;
+ 	struct inode *inode = f->f_dentry->d_inode;
+ 	unsigned long offset, curoffs;
+-	struct list_head *i;
++	struct ylist_head *i;
+ 	yaffs_Object *l;
+ 
+ 	char name[YAFFS_MAX_NAME_LENGTH + 1];
+@@ -932,24 +1141,20 @@ static int yaffs_readdir(struct file *f,
+ 
+ 	if (offset == 0) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_readdir: entry . ino %d \n",
+-		   (int)inode->i_ino));
+-		if (filldir(dirent, ".", 1, offset, inode->i_ino, DT_DIR)
+-		    < 0) {
++			("yaffs_readdir: entry . ino %d \n",
++			(int)inode->i_ino));
++		if (filldir(dirent, ".", 1, offset, inode->i_ino, DT_DIR) < 0)
+ 			goto out;
+-		}
+ 		offset++;
+ 		f->f_pos++;
+ 	}
+ 	if (offset == 1) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_readdir: entry .. ino %d \n",
+-		   (int)f->f_dentry->d_parent->d_inode->i_ino));
+-		if (filldir
+-		    (dirent, "..", 2, offset,
+-		     f->f_dentry->d_parent->d_inode->i_ino, DT_DIR) < 0) {
++			("yaffs_readdir: entry .. ino %d \n",
++			(int)f->f_dentry->d_parent->d_inode->i_ino));
++		if (filldir(dirent, "..", 2, offset,
++			f->f_dentry->d_parent->d_inode->i_ino, DT_DIR) < 0)
+ 			goto out;
+-		}
+ 		offset++;
+ 		f->f_pos++;
+ 	}
+@@ -965,35 +1170,32 @@ static int yaffs_readdir(struct file *f,
+ 		f->f_version = inode->i_version;
+ 	}
+ 
+-	list_for_each(i, &obj->variant.directoryVariant.children) {
++	ylist_for_each(i, &obj->variant.directoryVariant.children) {
+ 		curoffs++;
+ 		if (curoffs >= offset) {
+-			l = list_entry(i, yaffs_Object, siblings);
++			l = ylist_entry(i, yaffs_Object, siblings);
+ 
+ 			yaffs_GetObjectName(l, name,
+ 					    YAFFS_MAX_NAME_LENGTH + 1);
+ 			T(YAFFS_TRACE_OS,
+-			  (KERN_DEBUG "yaffs_readdir: %s inode %d\n", name,
++			  ("yaffs_readdir: %s inode %d\n", name,
+ 			   yaffs_GetObjectInode(l)));
+ 
+ 			if (filldir(dirent,
+-				    name,
+-				    strlen(name),
+-				    offset,
+-				    yaffs_GetObjectInode(l),
+-				    yaffs_GetObjectType(l))
+-			    < 0) {
++					name,
++					strlen(name),
++					offset,
++					yaffs_GetObjectInode(l),
++					yaffs_GetObjectType(l)) < 0)
+ 				goto up_and_out;
+-			}
+ 
+ 			offset++;
+ 			f->f_pos++;
+ 		}
+ 	}
+ 
+-      up_and_out:
+-      out:
+-
++up_and_out:
++out:
+ 	yaffs_GrossUnlock(dev);
+ 
+ 	return 0;
+@@ -1002,12 +1204,19 @@ static int yaffs_readdir(struct file *f,
+ /*
+  * File creation. Allocate an inode, and we're done..
+  */
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29)
++#define YCRED(x) x
++#else
++#define YCRED(x) (x->cred)
++#endif
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode,
+-		       dev_t rdev)
++			dev_t rdev)
+ #else
+ static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode,
+-		       int rdev)
++			int rdev)
+ #endif
+ {
+ 	struct inode *inode;
+@@ -1018,25 +1227,25 @@ static int yaffs_mknod(struct inode *dir
+ 	yaffs_Object *parent = yaffs_InodeToObject(dir);
+ 
+ 	int error = -ENOSPC;
+-	uid_t uid = current->fsuid;
+-	gid_t gid = (dir->i_mode & S_ISGID) ? dir->i_gid : current->fsgid;
++	uid_t uid = YCRED(current)->fsuid;
++	gid_t gid = (dir->i_mode & S_ISGID) ? dir->i_gid : YCRED(current)->fsgid;
+ 
+-	if((dir->i_mode & S_ISGID) && S_ISDIR(mode))
++	if ((dir->i_mode & S_ISGID) && S_ISDIR(mode))
+ 		mode |= S_ISGID;
+ 
+ 	if (parent) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_mknod: parent object %d type %d\n",
+-		   parent->objectId, parent->variantType));
++			("yaffs_mknod: parent object %d type %d\n",
++			parent->objectId, parent->variantType));
+ 	} else {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_mknod: could not get parent object\n"));
++			("yaffs_mknod: could not get parent object\n"));
+ 		return -EPERM;
+ 	}
+ 
+ 	T(YAFFS_TRACE_OS, ("yaffs_mknod: making oject for %s, "
+-			   "mode %x dev %x\n",
+-			   dentry->d_name.name, mode, rdev));
++			"mode %x dev %x\n",
++			dentry->d_name.name, mode, rdev));
+ 
+ 	dev = parent->myDev;
+ 
+@@ -1045,33 +1254,28 @@ static int yaffs_mknod(struct inode *dir
+ 	switch (mode & S_IFMT) {
+ 	default:
+ 		/* Special (socket, fifo, device...) */
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG
+-				   "yaffs_mknod: making special\n"));
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+-		obj =
+-		    yaffs_MknodSpecial(parent, dentry->d_name.name, mode, uid,
+-				       gid, old_encode_dev(rdev));
+-#else
+-		obj =
+-		    yaffs_MknodSpecial(parent, dentry->d_name.name, mode, uid,
+-				       gid, rdev);
++		T(YAFFS_TRACE_OS, ("yaffs_mknod: making special\n"));
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
++		obj = yaffs_MknodSpecial(parent, dentry->d_name.name, mode, uid,
++				gid, old_encode_dev(rdev));
++#else
++		obj = yaffs_MknodSpecial(parent, dentry->d_name.name, mode, uid,
++				gid, rdev);
+ #endif
+ 		break;
+ 	case S_IFREG:		/* file          */
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_mknod: making file\n"));
+-		obj =
+-		    yaffs_MknodFile(parent, dentry->d_name.name, mode, uid,
+-				    gid);
++		T(YAFFS_TRACE_OS, ("yaffs_mknod: making file\n"));
++		obj = yaffs_MknodFile(parent, dentry->d_name.name, mode, uid,
++				gid);
+ 		break;
+ 	case S_IFDIR:		/* directory */
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_mknod: making directory\n"));
+-		obj =
+-		    yaffs_MknodDirectory(parent, dentry->d_name.name, mode,
+-					 uid, gid);
++			("yaffs_mknod: making directory\n"));
++		obj = yaffs_MknodDirectory(parent, dentry->d_name.name, mode,
++					uid, gid);
+ 		break;
+ 	case S_IFLNK:		/* symlink */
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_mknod: making file\n"));
++		T(YAFFS_TRACE_OS, ("yaffs_mknod: making symlink\n"));
+ 		obj = NULL;	/* Do we ever get here? */
+ 		break;
+ 	}
+@@ -1083,12 +1287,12 @@ static int yaffs_mknod(struct inode *dir
+ 		inode = yaffs_get_inode(dir->i_sb, mode, rdev, obj);
+ 		d_instantiate(dentry, inode);
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_mknod created object %d count = %d\n",
+-		   obj->objectId, atomic_read(&inode->i_count)));
++			("yaffs_mknod created object %d count = %d\n",
++			obj->objectId, atomic_read(&inode->i_count)));
+ 		error = 0;
+ 	} else {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_mknod failed making object\n"));
++			("yaffs_mknod failed making object\n"));
+ 		error = -ENOMEM;
+ 	}
+ 
+@@ -1098,25 +1302,19 @@ static int yaffs_mknod(struct inode *dir
+ static int yaffs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
+ {
+ 	int retVal;
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_mkdir\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_mkdir\n"));
+ 	retVal = yaffs_mknod(dir, dentry, mode | S_IFDIR, 0);
+-#if 0
+-	/* attempt to fix dir bug - didn't work */
+-	if (!retVal) {
+-		dget(dentry);
+-	}
+-#endif
+ 	return retVal;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode,
+ 			struct nameidata *n)
+ #else
+ static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode)
+ #endif
+ {
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_create\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_create\n"));
+ 	return yaffs_mknod(dir, dentry, mode | S_IFREG, 0);
+ }
+ 
+@@ -1127,8 +1325,8 @@ static int yaffs_unlink(struct inode *di
+ 	yaffs_Device *dev;
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_unlink %d:%s\n", (int)(dir->i_ino),
+-	   dentry->d_name.name));
++		("yaffs_unlink %d:%s\n", (int)(dir->i_ino),
++		dentry->d_name.name));
+ 
+ 	dev = yaffs_InodeToObject(dir)->myDev;
+ 
+@@ -1151,82 +1349,74 @@ static int yaffs_unlink(struct inode *di
+  * Create a link...
+  */
+ static int yaffs_link(struct dentry *old_dentry, struct inode *dir,
+-		      struct dentry *dentry)
++			struct dentry *dentry)
+ {
+ 	struct inode *inode = old_dentry->d_inode;
+ 	yaffs_Object *obj = NULL;
+ 	yaffs_Object *link = NULL;
+ 	yaffs_Device *dev;
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_link\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_link\n"));
+ 
+ 	obj = yaffs_InodeToObject(inode);
+ 	dev = obj->myDev;
+ 
+ 	yaffs_GrossLock(dev);
+ 
+-	if (!S_ISDIR(inode->i_mode))	/* Don't link directories */
+-	{
+-		link =
+-		    yaffs_Link(yaffs_InodeToObject(dir), dentry->d_name.name,
+-			       obj);
+-	}
++	if (!S_ISDIR(inode->i_mode))		/* Don't link directories */
++		link = yaffs_Link(yaffs_InodeToObject(dir), dentry->d_name.name,
++			obj);
+ 
+ 	if (link) {
+ 		old_dentry->d_inode->i_nlink = yaffs_GetObjectLinkCount(obj);
+ 		d_instantiate(dentry, old_dentry->d_inode);
+ 		atomic_inc(&old_dentry->d_inode->i_count);
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_link link count %d i_count %d\n",
+-		   old_dentry->d_inode->i_nlink,
+-		   atomic_read(&old_dentry->d_inode->i_count)));
+-
++			("yaffs_link link count %d i_count %d\n",
++			old_dentry->d_inode->i_nlink,
++			atomic_read(&old_dentry->d_inode->i_count)));
+ 	}
+ 
+ 	yaffs_GrossUnlock(dev);
+ 
+-	if (link) {
+-
++	if (link)
+ 		return 0;
+-	}
+ 
+ 	return -EPERM;
+ }
+ 
+ static int yaffs_symlink(struct inode *dir, struct dentry *dentry,
+-			 const char *symname)
++				const char *symname)
+ {
+ 	yaffs_Object *obj;
+ 	yaffs_Device *dev;
+-	uid_t uid = current->fsuid;
+-	gid_t gid = (dir->i_mode & S_ISGID) ? dir->i_gid : current->fsgid;
++	uid_t uid = YCRED(current)->fsuid;
++	gid_t gid = (dir->i_mode & S_ISGID) ? dir->i_gid : YCRED(current)->fsgid;
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_symlink\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_symlink\n"));
+ 
+ 	dev = yaffs_InodeToObject(dir)->myDev;
+ 	yaffs_GrossLock(dev);
+ 	obj = yaffs_MknodSymLink(yaffs_InodeToObject(dir), dentry->d_name.name,
+-				 S_IFLNK | S_IRWXUGO, uid, gid, symname);
++				S_IFLNK | S_IRWXUGO, uid, gid, symname);
+ 	yaffs_GrossUnlock(dev);
+ 
+ 	if (obj) {
+-
+ 		struct inode *inode;
+ 
+ 		inode = yaffs_get_inode(dir->i_sb, obj->yst_mode, 0, obj);
+ 		d_instantiate(dentry, inode);
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG "symlink created OK\n"));
++		T(YAFFS_TRACE_OS, ("symlink created OK\n"));
+ 		return 0;
+ 	} else {
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG "symlink not created\n"));
+-
++		T(YAFFS_TRACE_OS, ("symlink not created\n"));
+ 	}
+ 
+ 	return -ENOMEM;
+ }
+ 
+ static int yaffs_sync_object(struct file *file, struct dentry *dentry,
+-			     int datasync)
++				int datasync)
+ {
+ 
+ 	yaffs_Object *obj;
+@@ -1236,7 +1426,7 @@ static int yaffs_sync_object(struct file
+ 
+ 	dev = obj->myDev;
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_sync_object\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_sync_object\n"));
+ 	yaffs_GrossLock(dev);
+ 	yaffs_FlushFile(obj, 1);
+ 	yaffs_GrossUnlock(dev);
+@@ -1255,41 +1445,36 @@ static int yaffs_rename(struct inode *ol
+ 	int retVal = YAFFS_FAIL;
+ 	yaffs_Object *target;
+ 
+-        T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_rename\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_rename\n"));
+ 	dev = yaffs_InodeToObject(old_dir)->myDev;
+ 
+ 	yaffs_GrossLock(dev);
+ 
+ 	/* Check if the target is an existing directory that is not empty. */
+-	target =
+-	    yaffs_FindObjectByName(yaffs_InodeToObject(new_dir),
+-				   new_dentry->d_name.name);
++	target = yaffs_FindObjectByName(yaffs_InodeToObject(new_dir),
++				new_dentry->d_name.name);
+ 
+ 
+ 
+-	if (target &&
+-	    target->variantType == YAFFS_OBJECT_TYPE_DIRECTORY &&
+-	    !list_empty(&target->variant.directoryVariant.children)) {
++	if (target && target->variantType == YAFFS_OBJECT_TYPE_DIRECTORY &&
++		!ylist_empty(&target->variant.directoryVariant.children)) {
+ 
+-	        T(YAFFS_TRACE_OS, (KERN_DEBUG "target is non-empty dir\n"));
++		T(YAFFS_TRACE_OS, ("target is non-empty dir\n"));
+ 
+ 		retVal = YAFFS_FAIL;
+ 	} else {
+-
+ 		/* Now does unlinking internally using shadowing mechanism */
+-	        T(YAFFS_TRACE_OS, (KERN_DEBUG "calling yaffs_RenameObject\n"));
+-
+-		retVal =
+-		    yaffs_RenameObject(yaffs_InodeToObject(old_dir),
+-				       old_dentry->d_name.name,
+-				       yaffs_InodeToObject(new_dir),
+-				       new_dentry->d_name.name);
++		T(YAFFS_TRACE_OS, ("calling yaffs_RenameObject\n"));
+ 
++		retVal = yaffs_RenameObject(yaffs_InodeToObject(old_dir),
++				old_dentry->d_name.name,
++				yaffs_InodeToObject(new_dir),
++				new_dentry->d_name.name);
+ 	}
+ 	yaffs_GrossUnlock(dev);
+ 
+ 	if (retVal == YAFFS_OK) {
+-		if(target) {
++		if (target) {
+ 			new_dentry->d_inode->i_nlink--;
+ 			mark_inode_dirty(new_dentry->d_inode);
+ 		}
+@@ -1298,7 +1483,6 @@ static int yaffs_rename(struct inode *ol
+ 	} else {
+ 		return -ENOTEMPTY;
+ 	}
+-
+ }
+ 
+ static int yaffs_setattr(struct dentry *dentry, struct iattr *attr)
+@@ -1308,15 +1492,15 @@ static int yaffs_setattr(struct dentry *
+ 	yaffs_Device *dev;
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_setattr of object %d\n",
+-	   yaffs_InodeToObject(inode)->objectId));
+-
+-	if ((error = inode_change_ok(inode, attr)) == 0) {
++		("yaffs_setattr of object %d\n",
++		yaffs_InodeToObject(inode)->objectId));
+ 
++	error = inode_change_ok(inode, attr);
++	if (error == 0) {
+ 		dev = yaffs_InodeToObject(inode)->myDev;
+ 		yaffs_GrossLock(dev);
+ 		if (yaffs_SetAttributes(yaffs_InodeToObject(inode), attr) ==
+-		    YAFFS_OK) {
++				YAFFS_OK) {
+ 			error = 0;
+ 		} else {
+ 			error = -EPERM;
+@@ -1328,12 +1512,12 @@ static int yaffs_setattr(struct dentry *
+ 	return error;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_statfs(struct dentry *dentry, struct kstatfs *buf)
+ {
+ 	yaffs_Device *dev = yaffs_DentryToObject(dentry)->myDev;
+ 	struct super_block *sb = dentry->d_sb;
+-#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_statfs(struct super_block *sb, struct kstatfs *buf)
+ {
+ 	yaffs_Device *dev = yaffs_SuperToDevice(sb);
+@@ -1343,32 +1527,53 @@ static int yaffs_statfs(struct super_blo
+ 	yaffs_Device *dev = yaffs_SuperToDevice(sb);
+ #endif
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_statfs\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_statfs\n"));
+ 
+ 	yaffs_GrossLock(dev);
+ 
+ 	buf->f_type = YAFFS_MAGIC;
+ 	buf->f_bsize = sb->s_blocksize;
+ 	buf->f_namelen = 255;
+-	if (sb->s_blocksize > dev->nDataBytesPerChunk) {
++
++	if (dev->nDataBytesPerChunk & (dev->nDataBytesPerChunk - 1)) {
++		/* Do this if chunk size is not a power of 2 */
++
++		uint64_t bytesInDev;
++		uint64_t bytesFree;
++
++		bytesInDev = ((uint64_t)((dev->endBlock - dev->startBlock + 1))) *
++			((uint64_t)(dev->nChunksPerBlock * dev->nDataBytesPerChunk));
++
++		do_div(bytesInDev, sb->s_blocksize); /* bytesInDev becomes the number of blocks */
++		buf->f_blocks = bytesInDev;
++
++		bytesFree  = ((uint64_t)(yaffs_GetNumberOfFreeChunks(dev))) *
++			((uint64_t)(dev->nDataBytesPerChunk));
++
++		do_div(bytesFree, sb->s_blocksize);
++
++		buf->f_bfree = bytesFree;
++
++	} else if (sb->s_blocksize > dev->nDataBytesPerChunk) {
+ 
+ 		buf->f_blocks =
+-		    (dev->endBlock - dev->startBlock +
+-		     1) * dev->nChunksPerBlock / (sb->s_blocksize /
+-						  dev->nDataBytesPerChunk);
++			(dev->endBlock - dev->startBlock + 1) *
++			dev->nChunksPerBlock /
++			(sb->s_blocksize / dev->nDataBytesPerChunk);
+ 		buf->f_bfree =
+-		    yaffs_GetNumberOfFreeChunks(dev) / (sb->s_blocksize /
+-							dev->nDataBytesPerChunk);
++			yaffs_GetNumberOfFreeChunks(dev) /
++			(sb->s_blocksize / dev->nDataBytesPerChunk);
+ 	} else {
+-
+ 		buf->f_blocks =
+-		    (dev->endBlock - dev->startBlock +
+-		     1) * dev->nChunksPerBlock * (dev->nDataBytesPerChunk /
+-						  sb->s_blocksize);
++			(dev->endBlock - dev->startBlock + 1) *
++			dev->nChunksPerBlock *
++			(dev->nDataBytesPerChunk / sb->s_blocksize);
++
+ 		buf->f_bfree =
+-		    yaffs_GetNumberOfFreeChunks(dev) * (dev->nDataBytesPerChunk /
+-							sb->s_blocksize);
++			yaffs_GetNumberOfFreeChunks(dev) *
++			(dev->nDataBytesPerChunk / sb->s_blocksize);
+ 	}
++
+ 	buf->f_files = 0;
+ 	buf->f_ffree = 0;
+ 	buf->f_bavail = buf->f_bfree;
+@@ -1378,18 +1583,19 @@ static int yaffs_statfs(struct super_blo
+ }
+ 
+ 
+-/**
+ static int yaffs_do_sync_fs(struct super_block *sb)
+ {
+ 
+ 	yaffs_Device *dev = yaffs_SuperToDevice(sb);
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_do_sync_fs\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_do_sync_fs\n"));
+ 
+-	if(sb->s_dirt) {
++	if (sb->s_dirt) {
+ 		yaffs_GrossLock(dev);
+ 
+-		if(dev)
++		if (dev) {
++			yaffs_FlushEntireDeviceCache(dev);
+ 			yaffs_CheckpointSave(dev);
++		}
+ 
+ 		yaffs_GrossUnlock(dev);
+ 
+@@ -1397,35 +1603,73 @@ static int yaffs_do_sync_fs(struct super
+ 	}
+ 	return 0;
+ }
+-**/
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static void yaffs_write_super(struct super_block *sb)
+ #else
+ static int yaffs_write_super(struct super_block *sb)
+ #endif
+ {
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_write_super\n"));
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18))
+-	return 0; /* yaffs_do_sync_fs(sb);*/
++	T(YAFFS_TRACE_OS, ("yaffs_write_super\n"));
++	if (yaffs_auto_checkpoint >= 2)
++		yaffs_do_sync_fs(sb);
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 18))
++	return 0;
+ #endif
+ }
+ 
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_sync_fs(struct super_block *sb, int wait)
+ #else
+ static int yaffs_sync_fs(struct super_block *sb)
+ #endif
+ {
++	T(YAFFS_TRACE_OS, ("yaffs_sync_fs\n"));
++
++	if (yaffs_auto_checkpoint >= 1)
++		yaffs_do_sync_fs(sb);
++
++	return 0;
++}
++
++#ifdef YAFFS_USE_OWN_IGET
++
++static struct inode *yaffs_iget(struct super_block *sb, unsigned long ino)
++{
++	struct inode *inode;
++	yaffs_Object *obj;
++	yaffs_Device *dev = yaffs_SuperToDevice(sb);
++
++	T(YAFFS_TRACE_OS,
++		("yaffs_iget for %lu\n", ino));
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_sync_fs\n"));
++	inode = iget_locked(sb, ino);
++	if (!inode)
++		return ERR_PTR(-ENOMEM);
++	if (!(inode->i_state & I_NEW))
++		return inode;
++
++	/* NB This is called as a side effect of other functions, but
++	 * we had to release the lock to prevent deadlocks, so
++	 * need to lock again.
++	 */
+ 
+-	return 0; /* yaffs_do_sync_fs(sb);*/
++	yaffs_GrossLock(dev);
+ 
++	obj = yaffs_FindObjectByNumber(dev, inode->i_ino);
++
++	yaffs_FillInodeFromObject(inode, obj);
++
++	yaffs_GrossUnlock(dev);
++
++	unlock_new_inode(inode);
++	return inode;
+ }
+ 
++#else
+ 
+ static void yaffs_read_inode(struct inode *inode)
+ {
+@@ -1438,7 +1682,7 @@ static void yaffs_read_inode(struct inod
+ 	yaffs_Device *dev = yaffs_SuperToDevice(inode->i_sb);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_read_inode for %d\n", (int)inode->i_ino));
++		("yaffs_read_inode for %d\n", (int)inode->i_ino));
+ 
+ 	yaffs_GrossLock(dev);
+ 
+@@ -1449,18 +1693,20 @@ static void yaffs_read_inode(struct inod
+ 	yaffs_GrossUnlock(dev);
+ }
+ 
+-static LIST_HEAD(yaffs_dev_list);
++#endif
++
++static YLIST_HEAD(yaffs_dev_list);
+ 
+-#if 0 // not used
++#if 0 /* not used */
+ static int yaffs_remount_fs(struct super_block *sb, int *flags, char *data)
+ {
+ 	yaffs_Device    *dev = yaffs_SuperToDevice(sb);
+ 
+-	if( *flags & MS_RDONLY ) {
++	if (*flags & MS_RDONLY) {
+ 		struct mtd_info *mtd = yaffs_SuperToDevice(sb)->genericDevice;
+ 
+ 		T(YAFFS_TRACE_OS,
+-			(KERN_DEBUG "yaffs_remount_fs: %s: RO\n", dev->name ));
++			("yaffs_remount_fs: %s: RO\n", dev->name));
+ 
+ 		yaffs_GrossLock(dev);
+ 
+@@ -1472,10 +1718,9 @@ static int yaffs_remount_fs(struct super
+ 			mtd->sync(mtd);
+ 
+ 		yaffs_GrossUnlock(dev);
+-	}
+-	else {
++	} else {
+ 		T(YAFFS_TRACE_OS,
+-			(KERN_DEBUG "yaffs_remount_fs: %s: RW\n", dev->name ));
++			("yaffs_remount_fs: %s: RW\n", dev->name));
+ 	}
+ 
+ 	return 0;
+@@ -1486,7 +1731,7 @@ static void yaffs_put_super(struct super
+ {
+ 	yaffs_Device *dev = yaffs_SuperToDevice(sb);
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_put_super\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_put_super\n"));
+ 
+ 	yaffs_GrossLock(dev);
+ 
+@@ -1494,18 +1739,17 @@ static void yaffs_put_super(struct super
+ 
+ 	yaffs_CheckpointSave(dev);
+ 
+-	if (dev->putSuperFunc) {
++	if (dev->putSuperFunc)
+ 		dev->putSuperFunc(sb);
+-	}
+ 
+ 	yaffs_Deinitialise(dev);
+ 
+ 	yaffs_GrossUnlock(dev);
+ 
+ 	/* we assume this is protected by lock_kernel() in mount/umount */
+-	list_del(&dev->devList);
++	ylist_del(&dev->devList);
+ 
+-	if(dev->spareBuffer){
++	if (dev->spareBuffer) {
+ 		YFREE(dev->spareBuffer);
+ 		dev->spareBuffer = NULL;
+ 	}
+@@ -1516,12 +1760,10 @@ static void yaffs_put_super(struct super
+ 
+ static void yaffs_MTDPutSuper(struct super_block *sb)
+ {
+-
+ 	struct mtd_info *mtd = yaffs_SuperToDevice(sb)->genericDevice;
+ 
+-	if (mtd->sync) {
++	if (mtd->sync)
+ 		mtd->sync(mtd);
+-	}
+ 
+ 	put_mtd_device(mtd);
+ }
+@@ -1531,9 +1773,9 @@ static void yaffs_MarkSuperBlockDirty(vo
+ {
+ 	struct super_block *sb = (struct super_block *)vsb;
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_MarkSuperBlockDirty() sb = %p\n",sb));
+-//	if(sb)
+-//		sb->s_dirt = 1;
++	T(YAFFS_TRACE_OS, ("yaffs_MarkSuperBlockDirty() sb = %p\n", sb));
++	if (sb)
++		sb->s_dirt = 1;
+ }
+ 
+ typedef struct {
+@@ -1546,48 +1788,48 @@ typedef struct {
+ #define MAX_OPT_LEN 20
+ static int yaffs_parse_options(yaffs_options *options, const char *options_str)
+ {
+-	char cur_opt[MAX_OPT_LEN+1];
++	char cur_opt[MAX_OPT_LEN + 1];
+ 	int p;
+ 	int error = 0;
+ 
+ 	/* Parse through the options which is a comma seperated list */
+ 
+-	while(options_str && *options_str && !error){
+-		memset(cur_opt,0,MAX_OPT_LEN+1);
++	while (options_str && *options_str && !error) {
++		memset(cur_opt, 0, MAX_OPT_LEN + 1);
+ 		p = 0;
+ 
+-		while(*options_str && *options_str != ','){
+-			if(p < MAX_OPT_LEN){
++		while (*options_str && *options_str != ',') {
++			if (p < MAX_OPT_LEN) {
+ 				cur_opt[p] = *options_str;
+ 				p++;
+ 			}
+ 			options_str++;
+ 		}
+ 
+-		if(!strcmp(cur_opt,"inband-tags"))
++		if (!strcmp(cur_opt, "inband-tags"))
+ 			options->inband_tags = 1;
+-		else if(!strcmp(cur_opt,"no-cache"))
++		else if (!strcmp(cur_opt, "no-cache"))
+ 			options->no_cache = 1;
+-		else if(!strcmp(cur_opt,"no-checkpoint-read"))
++		else if (!strcmp(cur_opt, "no-checkpoint-read"))
+ 			options->skip_checkpoint_read = 1;
+-		else if(!strcmp(cur_opt,"no-checkpoint-write"))
++		else if (!strcmp(cur_opt, "no-checkpoint-write"))
+ 			options->skip_checkpoint_write = 1;
+-		else if(!strcmp(cur_opt,"no-checkpoint")){
++		else if (!strcmp(cur_opt, "no-checkpoint")) {
+ 			options->skip_checkpoint_read = 1;
+ 			options->skip_checkpoint_write = 1;
+ 		} else {
+-			printk(KERN_INFO "yaffs: Bad mount option \"%s\"\n",cur_opt);
++			printk(KERN_INFO "yaffs: Bad mount option \"%s\"\n",
++					cur_opt);
+ 			error = 1;
+ 		}
+-
+ 	}
+ 
+ 	return error;
+ }
+ 
+ static struct super_block *yaffs_internal_read_super(int yaffsVersion,
+-						     struct super_block *sb,
+-						     void *data, int silent)
++						struct super_block *sb,
++						void *data, int silent)
+ {
+ 	int nBlocks;
+ 	struct inode *inode = NULL;
+@@ -1602,6 +1844,7 @@ static struct super_block *yaffs_interna
+ 
+ 	sb->s_magic = YAFFS_MAGIC;
+ 	sb->s_op = &yaffs_super_ops;
++	sb->s_flags |= MS_NOATIME;
+ 
+ 	if (!sb)
+ 		printk(KERN_INFO "yaffs: sb is NULL\n");
+@@ -1614,14 +1857,14 @@ static struct super_block *yaffs_interna
+ 		       sb->s_dev,
+ 		       yaffs_devname(sb, devname_buf));
+ 
+-	if(!data_str)
++	if (!data_str)
+ 		data_str = "";
+ 
+-	printk(KERN_INFO "yaffs: passed flags \"%s\"\n",data_str);
++	printk(KERN_INFO "yaffs: passed flags \"%s\"\n", data_str);
+ 
+-	memset(&options,0,sizeof(options));
++	memset(&options, 0, sizeof(options));
+ 
+-	if(yaffs_parse_options(&options,data_str)){
++	if (yaffs_parse_options(&options, data_str)) {
+ 		/* Option parsing failed */
+ 		return NULL;
+ 	}
+@@ -1645,9 +1888,9 @@ static struct super_block *yaffs_interna
+ 			       yaffs_devname(sb, devname_buf)));
+ 
+ 	/* Check it's an mtd device..... */
+-	if (MAJOR(sb->s_dev) != MTD_BLOCK_MAJOR) {
++	if (MAJOR(sb->s_dev) != MTD_BLOCK_MAJOR)
+ 		return NULL;	/* This isn't an mtd device */
+-	}
++
+ 	/* Get the device */
+ 	mtd = get_mtd_device(NULL, MINOR(sb->s_dev));
+ 	if (!mtd) {
+@@ -1673,29 +1916,23 @@ static struct super_block *yaffs_interna
+ 	T(YAFFS_TRACE_OS, (" %s %d\n", WRITE_SIZE_STR, WRITE_SIZE(mtd)));
+ 	T(YAFFS_TRACE_OS, (" oobsize %d\n", mtd->oobsize));
+ 	T(YAFFS_TRACE_OS, (" erasesize %d\n", mtd->erasesize));
+-	T(YAFFS_TRACE_OS, (" size %d\n", mtd->size));
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29)
++	T(YAFFS_TRACE_OS, (" size %u\n", mtd->size));
++#else
++	T(YAFFS_TRACE_OS, (" size %lld\n", mtd->size));
++#endif
+ 
+ #ifdef CONFIG_YAFFS_AUTO_YAFFS2
+ 
+-	if (yaffsVersion == 1 &&
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-	    mtd->writesize >= 2048) {
+-#else
+-	    mtd->oobblock >= 2048) {
+-#endif
+-	    T(YAFFS_TRACE_ALWAYS,("yaffs: auto selecting yaffs2\n"));
+-	    yaffsVersion = 2;
++	if (yaffsVersion == 1 && WRITE_SIZE(mtd) >= 2048) {
++		T(YAFFS_TRACE_ALWAYS, ("yaffs: auto selecting yaffs2\n"));
++		yaffsVersion = 2;
+ 	}
+ 
+ 	/* Added NCB 26/5/2006 for completeness */
+-	if (yaffsVersion == 2 &&
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-	    mtd->writesize == 512) {
+-#else
+-	    mtd->oobblock == 512) {
+-#endif
+-	    T(YAFFS_TRACE_ALWAYS,("yaffs: auto selecting yaffs1\n"));
+-	    yaffsVersion = 1;
++	if (yaffsVersion == 2 && !options.inband_tags && WRITE_SIZE(mtd) == 512) {
++		T(YAFFS_TRACE_ALWAYS, ("yaffs: auto selecting yaffs1\n"));
++		yaffsVersion = 1;
+ 	}
+ 
+ #endif
+@@ -1707,7 +1944,7 @@ static struct super_block *yaffs_interna
+ 		    !mtd->block_markbad ||
+ 		    !mtd->read ||
+ 		    !mtd->write ||
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ 		    !mtd->read_oob || !mtd->write_oob) {
+ #else
+ 		    !mtd->write_ecc ||
+@@ -1719,12 +1956,9 @@ static struct super_block *yaffs_interna
+ 			return NULL;
+ 		}
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-		if (mtd->writesize < YAFFS_MIN_YAFFS2_CHUNK_SIZE ||
+-#else
+-		if (mtd->oobblock < YAFFS_MIN_YAFFS2_CHUNK_SIZE ||
+-#endif
+-		    mtd->oobsize < YAFFS_MIN_YAFFS2_SPARE_SIZE) {
++		if ((WRITE_SIZE(mtd) < YAFFS_MIN_YAFFS2_CHUNK_SIZE ||
++		    mtd->oobsize < YAFFS_MIN_YAFFS2_SPARE_SIZE) &&
++		    !options.inband_tags) {
+ 			T(YAFFS_TRACE_ALWAYS,
+ 			  ("yaffs: MTD device does not have the "
+ 			   "right page sizes\n"));
+@@ -1735,7 +1969,7 @@ static struct super_block *yaffs_interna
+ 		if (!mtd->erase ||
+ 		    !mtd->read ||
+ 		    !mtd->write ||
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ 		    !mtd->read_oob || !mtd->write_oob) {
+ #else
+ 		    !mtd->write_ecc ||
+@@ -1761,7 +1995,7 @@ static struct super_block *yaffs_interna
+ 	 * Set the yaffs_Device up for mtd
+ 	 */
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 	sb->s_fs_info = dev = kmalloc(sizeof(yaffs_Device), GFP_KERNEL);
+ #else
+ 	sb->u.generic_sbp = dev = kmalloc(sizeof(yaffs_Device), GFP_KERNEL);
+@@ -1780,13 +2014,15 @@ static struct super_block *yaffs_interna
+ 
+ 	/* Set up the memory size parameters.... */
+ 
+-	nBlocks = mtd->size / (YAFFS_CHUNKS_PER_BLOCK * YAFFS_BYTES_PER_CHUNK);
++	nBlocks = YCALCBLOCKS(mtd->size, (YAFFS_CHUNKS_PER_BLOCK * YAFFS_BYTES_PER_CHUNK));
++
+ 	dev->startBlock = 0;
+ 	dev->endBlock = nBlocks - 1;
+ 	dev->nChunksPerBlock = YAFFS_CHUNKS_PER_BLOCK;
+-	dev->nDataBytesPerChunk = YAFFS_BYTES_PER_CHUNK;
++	dev->totalBytesPerChunk = YAFFS_BYTES_PER_CHUNK;
+ 	dev->nReservedBlocks = 5;
+ 	dev->nShortOpCaches = (options.no_cache) ? 0 : 10;
++	dev->inbandTags = options.inband_tags;
+ 
+ 	/* ... and the functions. */
+ 	if (yaffsVersion == 2) {
+@@ -1798,20 +2034,19 @@ static struct super_block *yaffs_interna
+ 		dev->queryNANDBlock = nandmtd2_QueryNANDBlock;
+ 		dev->spareBuffer = YMALLOC(mtd->oobsize);
+ 		dev->isYaffs2 = 1;
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-		dev->nDataBytesPerChunk = mtd->writesize;
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
++		dev->totalBytesPerChunk = mtd->writesize;
+ 		dev->nChunksPerBlock = mtd->erasesize / mtd->writesize;
+ #else
+-		dev->nDataBytesPerChunk = mtd->oobblock;
++		dev->totalBytesPerChunk = mtd->oobblock;
+ 		dev->nChunksPerBlock = mtd->erasesize / mtd->oobblock;
+ #endif
+-		nBlocks = mtd->size / mtd->erasesize;
++		nBlocks = YCALCBLOCKS(mtd->size, mtd->erasesize);
+ 
+-		dev->nCheckpointReservedBlocks = CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS;
+ 		dev->startBlock = 0;
+ 		dev->endBlock = nBlocks - 1;
+ 	} else {
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ 		/* use the MTD interface in yaffs_mtdif1.c */
+ 		dev->writeChunkWithTagsToNAND =
+ 			nandmtd1_WriteChunkWithTagsToNAND;
+@@ -1847,7 +2082,7 @@ static struct super_block *yaffs_interna
+ 	dev->skipCheckpointWrite = options.skip_checkpoint_write;
+ 
+ 	/* we assume this is protected by lock_kernel() in mount/umount */
+-	list_add_tail(&dev->devList, &yaffs_dev_list);
++	ylist_add_tail(&dev->devList, &yaffs_dev_list);
+ 
+ 	init_MUTEX(&dev->grossLock);
+ 
+@@ -1884,20 +2119,23 @@ static struct super_block *yaffs_interna
+ 		return NULL;
+ 	}
+ 	sb->s_root = root;
++	sb->s_dirt = !dev->isCheckpointed;
++	T(YAFFS_TRACE_ALWAYS,
++	  ("yaffs_read_super: isCheckpointed %d\n", dev->isCheckpointed));
+ 
+ 	T(YAFFS_TRACE_OS, ("yaffs_read_super: done\n"));
+ 	return sb;
+ }
+ 
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_internal_read_super_mtd(struct super_block *sb, void *data,
+ 					 int silent)
+ {
+ 	return yaffs_internal_read_super(1, sb, data, silent) ? 0 : -EINVAL;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_read_super(struct file_system_type *fs,
+ 			    int flags, const char *dev_name,
+ 			    void *data, struct vfsmount *mnt)
+@@ -1938,14 +2176,14 @@ static DECLARE_FSTYPE(yaffs_fs_type, "ya
+ 
+ #ifdef CONFIG_YAFFS_YAFFS2
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs2_internal_read_super_mtd(struct super_block *sb, void *data,
+ 					  int silent)
+ {
+ 	return yaffs_internal_read_super(2, sb, data, silent) ? 0 : -EINVAL;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs2_read_super(struct file_system_type *fs,
+ 			int flags, const char *dev_name, void *data,
+ 			struct vfsmount *mnt)
+@@ -1990,12 +2228,12 @@ static char *yaffs_dump_dev(char *buf, y
+ {
+ 	buf += sprintf(buf, "startBlock......... %d\n", dev->startBlock);
+ 	buf += sprintf(buf, "endBlock........... %d\n", dev->endBlock);
++	buf += sprintf(buf, "totalBytesPerChunk. %d\n", dev->totalBytesPerChunk);
+ 	buf += sprintf(buf, "nDataBytesPerChunk. %d\n", dev->nDataBytesPerChunk);
+ 	buf += sprintf(buf, "chunkGroupBits..... %d\n", dev->chunkGroupBits);
+ 	buf += sprintf(buf, "chunkGroupSize..... %d\n", dev->chunkGroupSize);
+ 	buf += sprintf(buf, "nErasedBlocks...... %d\n", dev->nErasedBlocks);
+ 	buf += sprintf(buf, "nReservedBlocks.... %d\n", dev->nReservedBlocks);
+-	buf += sprintf(buf, "nCheckptResBlocks.. %d\n", dev->nCheckpointReservedBlocks);
+ 	buf += sprintf(buf, "blocksInCheckpoint. %d\n", dev->blocksInCheckpoint);
+ 	buf += sprintf(buf, "nTnodesCreated..... %d\n", dev->nTnodesCreated);
+ 	buf += sprintf(buf, "nFreeTnodes........ %d\n", dev->nFreeTnodes);
+@@ -2006,10 +2244,8 @@ static char *yaffs_dump_dev(char *buf, y
+ 	buf += sprintf(buf, "nPageReads......... %d\n", dev->nPageReads);
+ 	buf += sprintf(buf, "nBlockErasures..... %d\n", dev->nBlockErasures);
+ 	buf += sprintf(buf, "nGCCopies.......... %d\n", dev->nGCCopies);
+-	buf +=
+-	    sprintf(buf, "garbageCollections. %d\n", dev->garbageCollections);
+-	buf +=
+-	    sprintf(buf, "passiveGCs......... %d\n",
++	buf += sprintf(buf, "garbageCollections. %d\n", dev->garbageCollections);
++	buf += sprintf(buf, "passiveGCs......... %d\n",
+ 		    dev->passiveGarbageCollections);
+ 	buf += sprintf(buf, "nRetriedWrites..... %d\n", dev->nRetriedWrites);
+ 	buf += sprintf(buf, "nShortOpCaches..... %d\n", dev->nShortOpCaches);
+@@ -2025,6 +2261,7 @@ static char *yaffs_dump_dev(char *buf, y
+ 	    sprintf(buf, "nBackgroudDeletions %d\n", dev->nBackgroundDeletions);
+ 	buf += sprintf(buf, "useNANDECC......... %d\n", dev->useNANDECC);
+ 	buf += sprintf(buf, "isYaffs2........... %d\n", dev->isYaffs2);
++	buf += sprintf(buf, "inbandTags......... %d\n", dev->inbandTags);
+ 
+ 	return buf;
+ }
+@@ -2033,7 +2270,7 @@ static int yaffs_proc_read(char *page,
+ 			   char **start,
+ 			   off_t offset, int count, int *eof, void *data)
+ {
+-	struct list_head *item;
++	struct ylist_head *item;
+ 	char *buf = page;
+ 	int step = offset;
+ 	int n = 0;
+@@ -2057,8 +2294,8 @@ static int yaffs_proc_read(char *page,
+ 	lock_kernel();
+ 
+ 	/* Locate and print the Nth entry.  Order N-squared but N is small. */
+-	list_for_each(item, &yaffs_dev_list) {
+-		yaffs_Device *dev = list_entry(item, yaffs_Device, devList);
++	ylist_for_each(item, &yaffs_dev_list) {
++		yaffs_Device *dev = ylist_entry(item, yaffs_Device, devList);
+ 		if (n < step) {
+ 			n++;
+ 			continue;
+@@ -2119,7 +2356,7 @@ static int yaffs_proc_write(struct file 
+ 	char *end;
+ 	char *mask_name;
+ 	const char *x;
+-	char substring[MAX_MASK_NAME_LENGTH+1];
++	char substring[MAX_MASK_NAME_LENGTH + 1];
+ 	int i;
+ 	int done = 0;
+ 	int add, len = 0;
+@@ -2129,9 +2366,8 @@ static int yaffs_proc_write(struct file 
+ 
+ 	while (!done && (pos < count)) {
+ 		done = 1;
+-		while ((pos < count) && isspace(buf[pos])) {
++		while ((pos < count) && isspace(buf[pos]))
+ 			pos++;
+-		}
+ 
+ 		switch (buf[pos]) {
+ 		case '+':
+@@ -2148,20 +2384,21 @@ static int yaffs_proc_write(struct file 
+ 		mask_name = NULL;
+ 
+ 		mask_bitfield = simple_strtoul(buf + pos, &end, 0);
++
+ 		if (end > buf + pos) {
+ 			mask_name = "numeral";
+ 			len = end - (buf + pos);
+ 			pos += len;
+ 			done = 0;
+ 		} else {
+-			for(x = buf + pos, i = 0;
+-			    (*x == '_' || (*x >='a' && *x <= 'z')) &&
+-			    i <MAX_MASK_NAME_LENGTH; x++, i++, pos++)
+-			    substring[i] = *x;
++			for (x = buf + pos, i = 0;
++			    (*x == '_' || (*x >= 'a' && *x <= 'z')) &&
++			    i < MAX_MASK_NAME_LENGTH; x++, i++, pos++)
++				substring[i] = *x;
+ 			substring[i] = '\0';
+ 
+ 			for (i = 0; mask_flags[i].mask_name != NULL; i++) {
+-				if(strcmp(substring,mask_flags[i].mask_name) == 0){
++				if (strcmp(substring, mask_flags[i].mask_name) == 0) {
+ 					mask_name = mask_flags[i].mask_name;
+ 					mask_bitfield = mask_flags[i].mask_bitfield;
+ 					done = 0;
+@@ -2172,7 +2409,7 @@ static int yaffs_proc_write(struct file 
+ 
+ 		if (mask_name != NULL) {
+ 			done = 0;
+-			switch(add) {
++			switch (add) {
+ 			case '-':
+ 				rg &= ~mask_bitfield;
+ 				break;
+@@ -2191,13 +2428,13 @@ static int yaffs_proc_write(struct file 
+ 
+ 	yaffs_traceMask = rg | YAFFS_TRACE_ALWAYS;
+ 
+-	printk("new trace = 0x%08X\n",yaffs_traceMask);
++	printk(KERN_DEBUG "new trace = 0x%08X\n", yaffs_traceMask);
+ 
+ 	if (rg & YAFFS_TRACE_ALWAYS) {
+ 		for (i = 0; mask_flags[i].mask_name != NULL; i++) {
+ 			char flag;
+ 			flag = ((rg & mask_flags[i].mask_bitfield) == mask_flags[i].mask_bitfield) ? '+' : '-';
+-			printk("%c%s\n", flag, mask_flags[i].mask_name);
++			printk(KERN_DEBUG "%c%s\n", flag, mask_flags[i].mask_name);
+ 		}
+ 	}
+ 
+@@ -2211,12 +2448,8 @@ struct file_system_to_install {
+ };
+ 
+ static struct file_system_to_install fs_to_install[] = {
+-//#ifdef CONFIG_YAFFS_YAFFS1
+ 	{&yaffs_fs_type, 0},
+-//#endif
+-//#ifdef CONFIG_YAFFS_YAFFS2
+ 	{&yaffs2_fs_type, 0},
+-//#endif
+ 	{NULL, 0}
+ };
+ 
+@@ -2231,15 +2464,14 @@ static int __init init_yaffs_fs(void)
+ 	/* Install the proc_fs entry */
+ 	my_proc_entry = create_proc_entry("yaffs",
+ 					       S_IRUGO | S_IFREG,
+-					       &proc_root);
++					       YPROC_ROOT);
+ 
+ 	if (my_proc_entry) {
+ 		my_proc_entry->write_proc = yaffs_proc_write;
+ 		my_proc_entry->read_proc = yaffs_proc_read;
+ 		my_proc_entry->data = NULL;
+-	} else {
++	} else
+ 		return -ENOMEM;
+-	}
+ 
+ 	/* Now add the file system entries */
+ 
+@@ -2247,9 +2479,8 @@ static int __init init_yaffs_fs(void)
+ 
+ 	while (fsinst->fst && !error) {
+ 		error = register_filesystem(fsinst->fst);
+-		if (!error) {
++		if (!error)
+ 			fsinst->installed = 1;
+-		}
+ 		fsinst++;
+ 	}
+ 
+@@ -2277,7 +2508,7 @@ static void __exit exit_yaffs_fs(void)
+ 	T(YAFFS_TRACE_ALWAYS, ("yaffs " __DATE__ " " __TIME__
+ 			       " removing. \n"));
+ 
+-	remove_proc_entry("yaffs", &proc_root);
++	remove_proc_entry("yaffs", YPROC_ROOT);
+ 
+ 	fsinst = fs_to_install;
+ 
+@@ -2288,7 +2519,6 @@ static void __exit exit_yaffs_fs(void)
+ 		}
+ 		fsinst++;
+ 	}
+-
+ }
+ 
+ module_init(init_yaffs_fs)
+--- /dev/null
++++ b/fs/yaffs2/yaffs_getblockinfo.h
+@@ -0,0 +1,34 @@
++/*
++ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
++ *
++ * Copyright (C) 2002-2007 Aleph One Ltd.
++ *   for Toby Churchill Ltd and Brightstar Engineering
++ *
++ * Created by Charles Manning <charles@aleph1.co.uk>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU Lesser General Public License version 2.1 as
++ * published by the Free Software Foundation.
++ *
++ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
++ */
++
++#ifndef __YAFFS_GETBLOCKINFO_H__
++#define __YAFFS_GETBLOCKINFO_H__
++
++#include "yaffs_guts.h"
++
++/* Function to manipulate block info */
++static Y_INLINE yaffs_BlockInfo *yaffs_GetBlockInfo(yaffs_Device * dev, int blk)
++{
++	if (blk < dev->internalStartBlock || blk > dev->internalEndBlock) {
++		T(YAFFS_TRACE_ERROR,
++		  (TSTR
++		   ("**>> yaffs: getBlockInfo block %d is not valid" TENDSTR),
++		   blk));
++		YBUG();
++	}
++	return &dev->blockInfo[blk - dev->internalStartBlock];
++}
++
++#endif
+--- a/fs/yaffs2/yaffs_guts.c
++++ b/fs/yaffs2/yaffs_guts.c
+@@ -12,16 +12,17 @@
+  */
+ 
+ const char *yaffs_guts_c_version =
+-    "$Id: yaffs_guts.c,v 1.49 2007-05-15 20:07:40 charles Exp $";
++    "$Id: yaffs_guts.c,v 1.82 2009-03-09 04:24:17 charles Exp $";
+ 
+ #include "yportenv.h"
+ 
+ #include "yaffsinterface.h"
+ #include "yaffs_guts.h"
+ #include "yaffs_tagsvalidity.h"
++#include "yaffs_getblockinfo.h"
+ 
+ #include "yaffs_tagscompat.h"
+-#ifndef  CONFIG_YAFFS_USE_OWN_SORT
++#ifndef CONFIG_YAFFS_USE_OWN_SORT
+ #include "yaffs_qsort.h"
+ #endif
+ #include "yaffs_nand.h"
+@@ -32,116 +33,116 @@ const char *yaffs_guts_c_version =
+ #include "yaffs_packedtags2.h"
+ 
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-void yfsd_LockYAFFS(BOOL fsLockOnly);
+-void yfsd_UnlockYAFFS(BOOL fsLockOnly);
+-#endif
+-
+ #define YAFFS_PASSIVE_GC_CHUNKS 2
+ 
+ #include "yaffs_ecc.h"
+ 
+ 
+ /* Robustification (if it ever comes about...) */
+-static void yaffs_RetireBlock(yaffs_Device * dev, int blockInNAND);
+-static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND, int erasedOk);
+-static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+-				     const __u8 * data,
+-				     const yaffs_ExtendedTags * tags);
+-static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+-				    const yaffs_ExtendedTags * tags);
++static void yaffs_RetireBlock(yaffs_Device *dev, int blockInNAND);
++static void yaffs_HandleWriteChunkError(yaffs_Device *dev, int chunkInNAND,
++		int erasedOk);
++static void yaffs_HandleWriteChunkOk(yaffs_Device *dev, int chunkInNAND,
++				const __u8 *data,
++				const yaffs_ExtendedTags *tags);
++static void yaffs_HandleUpdateChunk(yaffs_Device *dev, int chunkInNAND,
++				const yaffs_ExtendedTags *tags);
+ 
+ /* Other local prototypes */
+-static int yaffs_UnlinkObject( yaffs_Object *obj);
++static int yaffs_UnlinkObject(yaffs_Object *obj);
+ static int yaffs_ObjectHasCachedWriteData(yaffs_Object *obj);
+ 
+ static void yaffs_HardlinkFixup(yaffs_Device *dev, yaffs_Object *hardList);
+ 
+-static int yaffs_WriteNewChunkWithTagsToNAND(yaffs_Device * dev,
+-					     const __u8 * buffer,
+-					     yaffs_ExtendedTags * tags,
+-					     int useReserve);
+-static int yaffs_PutChunkIntoFile(yaffs_Object * in, int chunkInInode,
+-				  int chunkInNAND, int inScan);
+-
+-static yaffs_Object *yaffs_CreateNewObject(yaffs_Device * dev, int number,
+-					   yaffs_ObjectType type);
+-static void yaffs_AddObjectToDirectory(yaffs_Object * directory,
+-				       yaffs_Object * obj);
+-static int yaffs_UpdateObjectHeader(yaffs_Object * in, const YCHAR * name,
+-				    int force, int isShrink, int shadows);
+-static void yaffs_RemoveObjectFromDirectory(yaffs_Object * obj);
++static int yaffs_WriteNewChunkWithTagsToNAND(yaffs_Device *dev,
++					const __u8 *buffer,
++					yaffs_ExtendedTags *tags,
++					int useReserve);
++static int yaffs_PutChunkIntoFile(yaffs_Object *in, int chunkInInode,
++				int chunkInNAND, int inScan);
++
++static yaffs_Object *yaffs_CreateNewObject(yaffs_Device *dev, int number,
++					yaffs_ObjectType type);
++static void yaffs_AddObjectToDirectory(yaffs_Object *directory,
++				yaffs_Object *obj);
++static int yaffs_UpdateObjectHeader(yaffs_Object *in, const YCHAR *name,
++				int force, int isShrink, int shadows);
++static void yaffs_RemoveObjectFromDirectory(yaffs_Object *obj);
+ static int yaffs_CheckStructures(void);
+-static int yaffs_DeleteWorker(yaffs_Object * in, yaffs_Tnode * tn, __u32 level,
+-			      int chunkOffset, int *limit);
+-static int yaffs_DoGenericObjectDeletion(yaffs_Object * in);
+-
+-static yaffs_BlockInfo *yaffs_GetBlockInfo(yaffs_Device * dev, int blockNo);
+-
+-static __u8 *yaffs_GetTempBuffer(yaffs_Device * dev, int lineNo);
+-static void yaffs_ReleaseTempBuffer(yaffs_Device * dev, __u8 * buffer,
+-				    int lineNo);
++static int yaffs_DeleteWorker(yaffs_Object *in, yaffs_Tnode *tn, __u32 level,
++			int chunkOffset, int *limit);
++static int yaffs_DoGenericObjectDeletion(yaffs_Object *in);
++
++static yaffs_BlockInfo *yaffs_GetBlockInfo(yaffs_Device *dev, int blockNo);
+ 
+-static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev,
+-				  int chunkInNAND);
+ 
+-static int yaffs_UnlinkWorker(yaffs_Object * obj);
+-static void yaffs_DestroyObject(yaffs_Object * obj);
++static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev,
++				int chunkInNAND);
+ 
+-static int yaffs_TagsMatch(const yaffs_ExtendedTags * tags, int objectId,
+-			   int chunkInObject);
++static int yaffs_UnlinkWorker(yaffs_Object *obj);
+ 
+-loff_t yaffs_GetFileSize(yaffs_Object * obj);
++static int yaffs_TagsMatch(const yaffs_ExtendedTags *tags, int objectId,
++			int chunkInObject);
+ 
+-static int yaffs_AllocateChunk(yaffs_Device * dev, int useReserve, yaffs_BlockInfo **blockUsedPtr);
++static int yaffs_AllocateChunk(yaffs_Device *dev, int useReserve,
++				yaffs_BlockInfo **blockUsedPtr);
+ 
+-static void yaffs_VerifyFreeChunks(yaffs_Device * dev);
++static void yaffs_VerifyFreeChunks(yaffs_Device *dev);
+ 
+ static void yaffs_CheckObjectDetailsLoaded(yaffs_Object *in);
+ 
++static void yaffs_VerifyDirectory(yaffs_Object *directory);
+ #ifdef YAFFS_PARANOID
+-static int yaffs_CheckFileSanity(yaffs_Object * in);
++static int yaffs_CheckFileSanity(yaffs_Object *in);
+ #else
+ #define yaffs_CheckFileSanity(in)
+ #endif
+ 
+-static void yaffs_InvalidateWholeChunkCache(yaffs_Object * in);
+-static void yaffs_InvalidateChunkCache(yaffs_Object * object, int chunkId);
++static void yaffs_InvalidateWholeChunkCache(yaffs_Object *in);
++static void yaffs_InvalidateChunkCache(yaffs_Object *object, int chunkId);
+ 
+ static void yaffs_InvalidateCheckpoint(yaffs_Device *dev);
+ 
+-static int yaffs_FindChunkInFile(yaffs_Object * in, int chunkInInode,
+-				 yaffs_ExtendedTags * tags);
++static int yaffs_FindChunkInFile(yaffs_Object *in, int chunkInInode,
++				yaffs_ExtendedTags *tags);
+ 
+-static __u32 yaffs_GetChunkGroupBase(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos);
+-static yaffs_Tnode *yaffs_FindLevel0Tnode(yaffs_Device * dev,
+-					  yaffs_FileStructure * fStruct,
+-					  __u32 chunkId);
++static __u32 yaffs_GetChunkGroupBase(yaffs_Device *dev, yaffs_Tnode *tn,
++		unsigned pos);
++static yaffs_Tnode *yaffs_FindLevel0Tnode(yaffs_Device *dev,
++					yaffs_FileStructure *fStruct,
++					__u32 chunkId);
+ 
+ 
+ /* Function to calculate chunk and offset */
+ 
+-static void yaffs_AddrToChunk(yaffs_Device *dev, loff_t addr, __u32 *chunk, __u32 *offset)
++static void yaffs_AddrToChunk(yaffs_Device *dev, loff_t addr, int *chunkOut,
++		__u32 *offsetOut)
+ {
+-	if(dev->chunkShift){
+-		/* Easy-peasy power of 2 case */
+-		*chunk  = (__u32)(addr >> dev->chunkShift);
+-		*offset = (__u32)(addr & dev->chunkMask);
+-	}
+-	else if(dev->crumbsPerChunk)
+-	{
+-		/* Case where we're using "crumbs" */
+-		*offset = (__u32)(addr & dev->crumbMask);
+-		addr >>= dev->crumbShift;
+-		*chunk = ((__u32)addr)/dev->crumbsPerChunk;
+-		*offset += ((addr - (*chunk * dev->crumbsPerChunk)) << dev->crumbShift);
++	int chunk;
++	__u32 offset;
++
++	chunk  = (__u32)(addr >> dev->chunkShift);
++
++	if (dev->chunkDiv == 1) {
++		/* easy power of 2 case */
++		offset = (__u32)(addr & dev->chunkMask);
++	} else {
++		/* Non power-of-2 case */
++
++		loff_t chunkBase;
++
++		chunk /= dev->chunkDiv;
++
++		chunkBase = ((loff_t)chunk) * dev->nDataBytesPerChunk;
++		offset = (__u32)(addr - chunkBase);
+ 	}
+-	else
+-		YBUG();
++
++	*chunkOut = chunk;
++	*offsetOut = offset;
+ }
+ 
+-/* Function to return the number of shifts for a power of 2 greater than or equal
+- * to the given number
++/* Function to return the number of shifts for a power of 2 greater than or
++ * equal to the given number
+  * Note we don't try to cater for all possible numbers and this does not have to
+  * be hellishly efficient.
+  */
+@@ -153,13 +154,14 @@ static __u32 ShiftsGE(__u32 x)
+ 
+ 	nShifts = extraBits = 0;
+ 
+-	while(x>1){
+-		if(x & 1) extraBits++;
+-		x>>=1;
++	while (x > 1) {
++		if (x & 1)
++			extraBits++;
++		x >>= 1;
+ 		nShifts++;
+ 	}
+ 
+-	if(extraBits)
++	if (extraBits)
+ 		nShifts++;
+ 
+ 	return nShifts;
+@@ -168,16 +170,17 @@ static __u32 ShiftsGE(__u32 x)
+ /* Function to return the number of shifts to get a 1 in bit 0
+  */
+ 
+-static __u32 ShiftDiv(__u32 x)
++static __u32 Shifts(__u32 x)
+ {
+ 	int nShifts;
+ 
+ 	nShifts =  0;
+ 
+-	if(!x) return 0;
++	if (!x)
++		return 0;
+ 
+-	while( !(x&1)){
+-		x>>=1;
++	while (!(x&1)) {
++		x >>= 1;
+ 		nShifts++;
+ 	}
+ 
+@@ -195,21 +198,25 @@ static int yaffs_InitialiseTempBuffers(y
+ 	int i;
+ 	__u8 *buf = (__u8 *)1;
+ 
+-	memset(dev->tempBuffer,0,sizeof(dev->tempBuffer));
++	memset(dev->tempBuffer, 0, sizeof(dev->tempBuffer));
+ 
+ 	for (i = 0; buf && i < YAFFS_N_TEMP_BUFFERS; i++) {
+ 		dev->tempBuffer[i].line = 0;	/* not in use */
+ 		dev->tempBuffer[i].buffer = buf =
+-		    YMALLOC_DMA(dev->nDataBytesPerChunk);
++		    YMALLOC_DMA(dev->totalBytesPerChunk);
+ 	}
+ 
+ 	return buf ? YAFFS_OK : YAFFS_FAIL;
+-
+ }
+ 
+-static __u8 *yaffs_GetTempBuffer(yaffs_Device * dev, int lineNo)
++__u8 *yaffs_GetTempBuffer(yaffs_Device *dev, int lineNo)
+ {
+ 	int i, j;
++
++	dev->tempInUse++;
++	if (dev->tempInUse > dev->maxTemp)
++		dev->maxTemp = dev->tempInUse;
++
+ 	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
+ 		if (dev->tempBuffer[i].line == 0) {
+ 			dev->tempBuffer[i].line = lineNo;
+@@ -227,9 +234,9 @@ static __u8 *yaffs_GetTempBuffer(yaffs_D
+ 	T(YAFFS_TRACE_BUFFERS,
+ 	  (TSTR("Out of temp buffers at line %d, other held by lines:"),
+ 	   lineNo));
+-	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
++	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++)
+ 		T(YAFFS_TRACE_BUFFERS, (TSTR(" %d "), dev->tempBuffer[i].line));
+-	}
++
+ 	T(YAFFS_TRACE_BUFFERS, (TSTR(" " TENDSTR)));
+ 
+ 	/*
+@@ -242,10 +249,13 @@ static __u8 *yaffs_GetTempBuffer(yaffs_D
+ 
+ }
+ 
+-static void yaffs_ReleaseTempBuffer(yaffs_Device * dev, __u8 * buffer,
++void yaffs_ReleaseTempBuffer(yaffs_Device *dev, __u8 *buffer,
+ 				    int lineNo)
+ {
+ 	int i;
++
++	dev->tempInUse--;
++
+ 	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
+ 		if (dev->tempBuffer[i].buffer == buffer) {
+ 			dev->tempBuffer[i].line = 0;
+@@ -267,27 +277,26 @@ static void yaffs_ReleaseTempBuffer(yaff
+ /*
+  * Determine if we have a managed buffer.
+  */
+-int yaffs_IsManagedTempBuffer(yaffs_Device * dev, const __u8 * buffer)
++int yaffs_IsManagedTempBuffer(yaffs_Device *dev, const __u8 *buffer)
+ {
+ 	int i;
++
+ 	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
+ 		if (dev->tempBuffer[i].buffer == buffer)
+ 			return 1;
++	}
+ 
++	for (i = 0; i < dev->nShortOpCaches; i++) {
++		if (dev->srCache[i].data == buffer)
++			return 1;
+ 	}
+ 
+-    for (i = 0; i < dev->nShortOpCaches; i++) {
+-        if( dev->srCache[i].data == buffer )
+-            return 1;
+-
+-    }
+-
+-    if (buffer == dev->checkpointBuffer)
+-      return 1;
+-
+-    T(YAFFS_TRACE_ALWAYS,
+-	  (TSTR("yaffs: unmaged buffer detected.\n" TENDSTR)));
+-    return 0;
++	if (buffer == dev->checkpointBuffer)
++		return 1;
++
++	T(YAFFS_TRACE_ALWAYS,
++		(TSTR("yaffs: unmaged buffer detected.\n" TENDSTR)));
++	return 0;
+ }
+ 
+ 
+@@ -296,62 +305,63 @@ int yaffs_IsManagedTempBuffer(yaffs_Devi
+  * Chunk bitmap manipulations
+  */
+ 
+-static Y_INLINE __u8 *yaffs_BlockBits(yaffs_Device * dev, int blk)
++static Y_INLINE __u8 *yaffs_BlockBits(yaffs_Device *dev, int blk)
+ {
+ 	if (blk < dev->internalStartBlock || blk > dev->internalEndBlock) {
+ 		T(YAFFS_TRACE_ERROR,
+-		  (TSTR("**>> yaffs: BlockBits block %d is not valid" TENDSTR),
+-		   blk));
++			(TSTR("**>> yaffs: BlockBits block %d is not valid" TENDSTR),
++			blk));
+ 		YBUG();
+ 	}
+ 	return dev->chunkBits +
+-	    (dev->chunkBitmapStride * (blk - dev->internalStartBlock));
++		(dev->chunkBitmapStride * (blk - dev->internalStartBlock));
+ }
+ 
+ static Y_INLINE void yaffs_VerifyChunkBitId(yaffs_Device *dev, int blk, int chunk)
+ {
+-	if(blk < dev->internalStartBlock || blk > dev->internalEndBlock ||
+-	   chunk < 0 || chunk >= dev->nChunksPerBlock) {
+-	   T(YAFFS_TRACE_ERROR,
+-	    (TSTR("**>> yaffs: Chunk Id (%d:%d) invalid"TENDSTR),blk,chunk));
+-	    YBUG();
++	if (blk < dev->internalStartBlock || blk > dev->internalEndBlock ||
++			chunk < 0 || chunk >= dev->nChunksPerBlock) {
++		T(YAFFS_TRACE_ERROR,
++		(TSTR("**>> yaffs: Chunk Id (%d:%d) invalid"TENDSTR),
++			blk, chunk));
++		YBUG();
+ 	}
+ }
+ 
+-static Y_INLINE void yaffs_ClearChunkBits(yaffs_Device * dev, int blk)
++static Y_INLINE void yaffs_ClearChunkBits(yaffs_Device *dev, int blk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+ 
+ 	memset(blkBits, 0, dev->chunkBitmapStride);
+ }
+ 
+-static Y_INLINE void yaffs_ClearChunkBit(yaffs_Device * dev, int blk, int chunk)
++static Y_INLINE void yaffs_ClearChunkBit(yaffs_Device *dev, int blk, int chunk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+ 
+-	yaffs_VerifyChunkBitId(dev,blk,chunk);
++	yaffs_VerifyChunkBitId(dev, blk, chunk);
+ 
+ 	blkBits[chunk / 8] &= ~(1 << (chunk & 7));
+ }
+ 
+-static Y_INLINE void yaffs_SetChunkBit(yaffs_Device * dev, int blk, int chunk)
++static Y_INLINE void yaffs_SetChunkBit(yaffs_Device *dev, int blk, int chunk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+ 
+-	yaffs_VerifyChunkBitId(dev,blk,chunk);
++	yaffs_VerifyChunkBitId(dev, blk, chunk);
+ 
+ 	blkBits[chunk / 8] |= (1 << (chunk & 7));
+ }
+ 
+-static Y_INLINE int yaffs_CheckChunkBit(yaffs_Device * dev, int blk, int chunk)
++static Y_INLINE int yaffs_CheckChunkBit(yaffs_Device *dev, int blk, int chunk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+-	yaffs_VerifyChunkBitId(dev,blk,chunk);
++	yaffs_VerifyChunkBitId(dev, blk, chunk);
+ 
+ 	return (blkBits[chunk / 8] & (1 << (chunk & 7))) ? 1 : 0;
+ }
+ 
+-static Y_INLINE int yaffs_StillSomeChunkBits(yaffs_Device * dev, int blk)
++static Y_INLINE int yaffs_StillSomeChunkBits(yaffs_Device *dev, int blk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+ 	int i;
+@@ -363,17 +373,17 @@ static Y_INLINE int yaffs_StillSomeChunk
+ 	return 0;
+ }
+ 
+-static int yaffs_CountChunkBits(yaffs_Device * dev, int blk)
++static int yaffs_CountChunkBits(yaffs_Device *dev, int blk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+ 	int i;
+ 	int n = 0;
+ 	for (i = 0; i < dev->chunkBitmapStride; i++) {
+ 		__u8 x = *blkBits;
+-		while(x){
+-			if(x & 1)
++		while (x) {
++			if (x & 1)
+ 				n++;
+-			x >>=1;
++			x >>= 1;
+ 		}
+ 
+ 		blkBits++;
+@@ -400,7 +410,7 @@ static int yaffs_SkipNANDVerification(ya
+ 	return !(yaffs_traceMask & (YAFFS_TRACE_VERIFY_NAND));
+ }
+ 
+-static const char * blockStateName[] = {
++static const char *blockStateName[] = {
+ "Unknown",
+ "Needs scanning",
+ "Scanning",
+@@ -413,64 +423,65 @@ static const char * blockStateName[] = {
+ "Dead"
+ };
+ 
+-static void yaffs_VerifyBlock(yaffs_Device *dev,yaffs_BlockInfo *bi,int n)
++static void yaffs_VerifyBlock(yaffs_Device *dev, yaffs_BlockInfo *bi, int n)
+ {
+ 	int actuallyUsed;
+ 	int inUse;
+ 
+-	if(yaffs_SkipVerification(dev))
++	if (yaffs_SkipVerification(dev))
+ 		return;
+ 
+ 	/* Report illegal runtime states */
+-	if(bi->blockState <0 || bi->blockState >= YAFFS_NUMBER_OF_BLOCK_STATES)
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has undefined state %d"TENDSTR),n,bi->blockState));
++	if (bi->blockState >= YAFFS_NUMBER_OF_BLOCK_STATES)
++		T(YAFFS_TRACE_VERIFY, (TSTR("Block %d has undefined state %d"TENDSTR), n, bi->blockState));
+ 
+-	switch(bi->blockState){
+-	 case YAFFS_BLOCK_STATE_UNKNOWN:
+-	 case YAFFS_BLOCK_STATE_SCANNING:
+-	 case YAFFS_BLOCK_STATE_NEEDS_SCANNING:
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has bad run-state %s"TENDSTR),
+-		n,blockStateName[bi->blockState]));
++	switch (bi->blockState) {
++	case YAFFS_BLOCK_STATE_UNKNOWN:
++	case YAFFS_BLOCK_STATE_SCANNING:
++	case YAFFS_BLOCK_STATE_NEEDS_SCANNING:
++		T(YAFFS_TRACE_VERIFY, (TSTR("Block %d has bad run-state %s"TENDSTR),
++		n, blockStateName[bi->blockState]));
+ 	}
+ 
+ 	/* Check pages in use and soft deletions are legal */
+ 
+ 	actuallyUsed = bi->pagesInUse - bi->softDeletions;
+ 
+-	if(bi->pagesInUse < 0 || bi->pagesInUse > dev->nChunksPerBlock ||
++	if (bi->pagesInUse < 0 || bi->pagesInUse > dev->nChunksPerBlock ||
+ 	   bi->softDeletions < 0 || bi->softDeletions > dev->nChunksPerBlock ||
+ 	   actuallyUsed < 0 || actuallyUsed > dev->nChunksPerBlock)
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has illegal values pagesInUsed %d softDeletions %d"TENDSTR),
+-		n,bi->pagesInUse,bi->softDeletions));
++		T(YAFFS_TRACE_VERIFY, (TSTR("Block %d has illegal values pagesInUsed %d softDeletions %d"TENDSTR),
++		n, bi->pagesInUse, bi->softDeletions));
+ 
+ 
+ 	/* Check chunk bitmap legal */
+-	inUse = yaffs_CountChunkBits(dev,n);
+-	if(inUse != bi->pagesInUse)
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has inconsistent values pagesInUse %d counted chunk bits %d"TENDSTR),
+-			n,bi->pagesInUse,inUse));
++	inUse = yaffs_CountChunkBits(dev, n);
++	if (inUse != bi->pagesInUse)
++		T(YAFFS_TRACE_VERIFY, (TSTR("Block %d has inconsistent values pagesInUse %d counted chunk bits %d"TENDSTR),
++			n, bi->pagesInUse, inUse));
+ 
+ 	/* Check that the sequence number is valid.
+ 	 * Ten million is legal, but is very unlikely
+ 	 */
+-	if(dev->isYaffs2 &&
++	if (dev->isYaffs2 &&
+ 	   (bi->blockState == YAFFS_BLOCK_STATE_ALLOCATING || bi->blockState == YAFFS_BLOCK_STATE_FULL) &&
+-	   (bi->sequenceNumber < YAFFS_LOWEST_SEQUENCE_NUMBER || bi->sequenceNumber > 10000000 ))
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has suspect sequence number of %d"TENDSTR),
+-		n,bi->sequenceNumber));
+-
++	   (bi->sequenceNumber < YAFFS_LOWEST_SEQUENCE_NUMBER || bi->sequenceNumber > 10000000))
++		T(YAFFS_TRACE_VERIFY, (TSTR("Block %d has suspect sequence number of %d"TENDSTR),
++		n, bi->sequenceNumber));
+ }
+ 
+-static void yaffs_VerifyCollectedBlock(yaffs_Device *dev,yaffs_BlockInfo *bi,int n)
++static void yaffs_VerifyCollectedBlock(yaffs_Device *dev, yaffs_BlockInfo *bi,
++		int n)
+ {
+-	yaffs_VerifyBlock(dev,bi,n);
++	yaffs_VerifyBlock(dev, bi, n);
+ 
+ 	/* After collection the block should be in the erased state */
+-	/* TODO: This will need to change if we do partial gc */
++	/* This will need to change if we do partial gc */
+ 
+-	if(bi->blockState != YAFFS_BLOCK_STATE_EMPTY){
+-		T(YAFFS_TRACE_ERROR,(TSTR("Block %d is in state %d after gc, should be erased"TENDSTR),
+-			n,bi->blockState));
++	if (bi->blockState != YAFFS_BLOCK_STATE_COLLECTING &&
++			bi->blockState != YAFFS_BLOCK_STATE_EMPTY) {
++		T(YAFFS_TRACE_ERROR, (TSTR("Block %d is in state %d after gc, should be erased"TENDSTR),
++			n, bi->blockState));
+ 	}
+ }
+ 
+@@ -480,52 +491,49 @@ static void yaffs_VerifyBlocks(yaffs_Dev
+ 	int nBlocksPerState[YAFFS_NUMBER_OF_BLOCK_STATES];
+ 	int nIllegalBlockStates = 0;
+ 
+-
+-	if(yaffs_SkipVerification(dev))
++	if (yaffs_SkipVerification(dev))
+ 		return;
+ 
+-	memset(nBlocksPerState,0,sizeof(nBlocksPerState));
+-
++	memset(nBlocksPerState, 0, sizeof(nBlocksPerState));
+ 
+-	for(i = dev->internalStartBlock; i <= dev->internalEndBlock; i++){
+-		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,i);
+-		yaffs_VerifyBlock(dev,bi,i);
++	for (i = dev->internalStartBlock; i <= dev->internalEndBlock; i++) {
++		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, i);
++		yaffs_VerifyBlock(dev, bi, i);
+ 
+-		if(bi->blockState >=0 && bi->blockState < YAFFS_NUMBER_OF_BLOCK_STATES)
++		if (bi->blockState < YAFFS_NUMBER_OF_BLOCK_STATES)
+ 			nBlocksPerState[bi->blockState]++;
+ 		else
+ 			nIllegalBlockStates++;
+-
+ 	}
+ 
+-	T(YAFFS_TRACE_VERIFY,(TSTR(""TENDSTR)));
+-	T(YAFFS_TRACE_VERIFY,(TSTR("Block summary"TENDSTR)));
++	T(YAFFS_TRACE_VERIFY, (TSTR(""TENDSTR)));
++	T(YAFFS_TRACE_VERIFY, (TSTR("Block summary"TENDSTR)));
+ 
+-	T(YAFFS_TRACE_VERIFY,(TSTR("%d blocks have illegal states"TENDSTR),nIllegalBlockStates));
+-	if(nBlocksPerState[YAFFS_BLOCK_STATE_ALLOCATING] > 1)
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Too many allocating blocks"TENDSTR)));
++	T(YAFFS_TRACE_VERIFY, (TSTR("%d blocks have illegal states"TENDSTR), nIllegalBlockStates));
++	if (nBlocksPerState[YAFFS_BLOCK_STATE_ALLOCATING] > 1)
++		T(YAFFS_TRACE_VERIFY, (TSTR("Too many allocating blocks"TENDSTR)));
+ 
+-	for(i = 0; i < YAFFS_NUMBER_OF_BLOCK_STATES; i++)
++	for (i = 0; i < YAFFS_NUMBER_OF_BLOCK_STATES; i++)
+ 		T(YAFFS_TRACE_VERIFY,
+ 		  (TSTR("%s %d blocks"TENDSTR),
+-		  blockStateName[i],nBlocksPerState[i]));
++		  blockStateName[i], nBlocksPerState[i]));
+ 
+-	if(dev->blocksInCheckpoint != nBlocksPerState[YAFFS_BLOCK_STATE_CHECKPOINT])
++	if (dev->blocksInCheckpoint != nBlocksPerState[YAFFS_BLOCK_STATE_CHECKPOINT])
+ 		T(YAFFS_TRACE_VERIFY,
+ 		 (TSTR("Checkpoint block count wrong dev %d count %d"TENDSTR),
+ 		 dev->blocksInCheckpoint, nBlocksPerState[YAFFS_BLOCK_STATE_CHECKPOINT]));
+ 
+-	if(dev->nErasedBlocks != nBlocksPerState[YAFFS_BLOCK_STATE_EMPTY])
++	if (dev->nErasedBlocks != nBlocksPerState[YAFFS_BLOCK_STATE_EMPTY])
+ 		T(YAFFS_TRACE_VERIFY,
+ 		 (TSTR("Erased block count wrong dev %d count %d"TENDSTR),
+ 		 dev->nErasedBlocks, nBlocksPerState[YAFFS_BLOCK_STATE_EMPTY]));
+ 
+-	if(nBlocksPerState[YAFFS_BLOCK_STATE_COLLECTING] > 1)
++	if (nBlocksPerState[YAFFS_BLOCK_STATE_COLLECTING] > 1)
+ 		T(YAFFS_TRACE_VERIFY,
+ 		 (TSTR("Too many collecting blocks %d (max is 1)"TENDSTR),
+ 		 nBlocksPerState[YAFFS_BLOCK_STATE_COLLECTING]));
+ 
+-	T(YAFFS_TRACE_VERIFY,(TSTR(""TENDSTR)));
++	T(YAFFS_TRACE_VERIFY, (TSTR(""TENDSTR)));
+ 
+ }
+ 
+@@ -535,26 +543,26 @@ static void yaffs_VerifyBlocks(yaffs_Dev
+  */
+ static void yaffs_VerifyObjectHeader(yaffs_Object *obj, yaffs_ObjectHeader *oh, yaffs_ExtendedTags *tags, int parentCheck)
+ {
+-	if(yaffs_SkipVerification(obj->myDev))
++	if (obj && yaffs_SkipVerification(obj->myDev))
+ 		return;
+ 
+-	if(!(tags && obj && oh)){
+-	 	T(YAFFS_TRACE_VERIFY,
+-		 		(TSTR("Verifying object header tags %x obj %x oh %x"TENDSTR),
+-		 		(__u32)tags,(__u32)obj,(__u32)oh));
++	if (!(tags && obj && oh)) {
++		T(YAFFS_TRACE_VERIFY,
++				(TSTR("Verifying object header tags %x obj %x oh %x"TENDSTR),
++				(__u32)tags, (__u32)obj, (__u32)oh));
+ 		return;
+ 	}
+ 
+-	if(oh->type <= YAFFS_OBJECT_TYPE_UNKNOWN ||
+-	   oh->type > YAFFS_OBJECT_TYPE_MAX)
+-	 	T(YAFFS_TRACE_VERIFY,
+-		 (TSTR("Obj %d header type is illegal value 0x%x"TENDSTR),
+-		 tags->objectId, oh->type));
+-
+-	if(tags->objectId != obj->objectId)
+-	 	T(YAFFS_TRACE_VERIFY,
+-		 (TSTR("Obj %d header mismatch objectId %d"TENDSTR),
+-		 tags->objectId, obj->objectId));
++	if (oh->type <= YAFFS_OBJECT_TYPE_UNKNOWN ||
++			oh->type > YAFFS_OBJECT_TYPE_MAX)
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d header type is illegal value 0x%x"TENDSTR),
++			tags->objectId, oh->type));
++
++	if (tags->objectId != obj->objectId)
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d header mismatch objectId %d"TENDSTR),
++			tags->objectId, obj->objectId));
+ 
+ 
+ 	/*
+@@ -563,46 +571,43 @@ static void yaffs_VerifyObjectHeader(yaf
+ 	 * Tests do not apply to the root object.
+ 	 */
+ 
+-	if(parentCheck && tags->objectId > 1 && !obj->parent)
+-	 	T(YAFFS_TRACE_VERIFY,
+-		 (TSTR("Obj %d header mismatch parentId %d obj->parent is NULL"TENDSTR),
+-	 	 tags->objectId, oh->parentObjectId));
+-
+-
+-	if(parentCheck && obj->parent &&
+-	   oh->parentObjectId != obj->parent->objectId &&
+-	   (oh->parentObjectId != YAFFS_OBJECTID_UNLINKED ||
+-	    obj->parent->objectId != YAFFS_OBJECTID_DELETED))
+-	 	T(YAFFS_TRACE_VERIFY,
+-		 (TSTR("Obj %d header mismatch parentId %d parentObjectId %d"TENDSTR),
+-	 	 tags->objectId, oh->parentObjectId, obj->parent->objectId));
++	if (parentCheck && tags->objectId > 1 && !obj->parent)
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d header mismatch parentId %d obj->parent is NULL"TENDSTR),
++			tags->objectId, oh->parentObjectId));
+ 
++	if (parentCheck && obj->parent &&
++			oh->parentObjectId != obj->parent->objectId &&
++			(oh->parentObjectId != YAFFS_OBJECTID_UNLINKED ||
++			obj->parent->objectId != YAFFS_OBJECTID_DELETED))
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d header mismatch parentId %d parentObjectId %d"TENDSTR),
++			tags->objectId, oh->parentObjectId, obj->parent->objectId));
+ 
+-	if(tags->objectId > 1 && oh->name[0] == 0) /* Null name */
++	if (tags->objectId > 1 && oh->name[0] == 0) /* Null name */
+ 		T(YAFFS_TRACE_VERIFY,
+-		(TSTR("Obj %d header name is NULL"TENDSTR),
+-		 obj->objectId));
++			(TSTR("Obj %d header name is NULL"TENDSTR),
++			obj->objectId));
+ 
+-	if(tags->objectId > 1 && ((__u8)(oh->name[0])) == 0xff) /* Trashed name */
++	if (tags->objectId > 1 && ((__u8)(oh->name[0])) == 0xff) /* Trashed name */
+ 		T(YAFFS_TRACE_VERIFY,
+-		(TSTR("Obj %d header name is 0xFF"TENDSTR),
+-		 obj->objectId));
++			(TSTR("Obj %d header name is 0xFF"TENDSTR),
++			obj->objectId));
+ }
+ 
+ 
+ 
+-static int yaffs_VerifyTnodeWorker(yaffs_Object * obj, yaffs_Tnode * tn,
+-				  	__u32 level, int chunkOffset)
++static int yaffs_VerifyTnodeWorker(yaffs_Object *obj, yaffs_Tnode *tn,
++					__u32 level, int chunkOffset)
+ {
+ 	int i;
+ 	yaffs_Device *dev = obj->myDev;
+ 	int ok = 1;
+-	int nTnodeBytes = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
+ 
+ 	if (tn) {
+ 		if (level > 0) {
+ 
+-			for (i = 0; i < YAFFS_NTNODES_INTERNAL && ok; i++){
++			for (i = 0; i < YAFFS_NTNODES_INTERNAL && ok; i++) {
+ 				if (tn->internal[i]) {
+ 					ok = yaffs_VerifyTnodeWorker(obj,
+ 							tn->internal[i],
+@@ -611,20 +616,19 @@ static int yaffs_VerifyTnodeWorker(yaffs
+ 				}
+ 			}
+ 		} else if (level == 0) {
+-			int i;
+ 			yaffs_ExtendedTags tags;
+ 			__u32 objectId = obj->objectId;
+ 
+ 			chunkOffset <<=  YAFFS_TNODES_LEVEL0_BITS;
+ 
+-			for(i = 0; i < YAFFS_NTNODES_LEVEL0; i++){
+-				__u32 theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
++			for (i = 0; i < YAFFS_NTNODES_LEVEL0; i++) {
++				__u32 theChunk = yaffs_GetChunkGroupBase(dev, tn, i);
+ 
+-				if(theChunk > 0){
++				if (theChunk > 0) {
+ 					/* T(~0,(TSTR("verifying (%d:%d) %d"TENDSTR),tags.objectId,tags.chunkId,theChunk)); */
+-					yaffs_ReadChunkWithTagsFromNAND(dev,theChunk,NULL, &tags);
+-					if(tags.objectId != objectId || tags.chunkId != chunkOffset){
+-						T(~0,(TSTR("Object %d chunkId %d NAND mismatch chunk %d tags (%d:%d)"TENDSTR),
++					yaffs_ReadChunkWithTagsFromNAND(dev, theChunk, NULL, &tags);
++					if (tags.objectId != objectId || tags.chunkId != chunkOffset) {
++						T(~0, (TSTR("Object %d chunkId %d NAND mismatch chunk %d tags (%d:%d)"TENDSTR),
+ 							objectId, chunkOffset, theChunk,
+ 							tags.objectId, tags.chunkId));
+ 					}
+@@ -646,13 +650,15 @@ static void yaffs_VerifyFile(yaffs_Objec
+ 	__u32 lastChunk;
+ 	__u32 x;
+ 	__u32 i;
+-	int ok;
+ 	yaffs_Device *dev;
+ 	yaffs_ExtendedTags tags;
+ 	yaffs_Tnode *tn;
+ 	__u32 objectId;
+ 
+-	if(obj && yaffs_SkipVerification(obj->myDev))
++	if (!obj)
++		return;
++
++	if (yaffs_SkipVerification(obj->myDev))
+ 		return;
+ 
+ 	dev = obj->myDev;
+@@ -662,17 +668,17 @@ static void yaffs_VerifyFile(yaffs_Objec
+ 	lastChunk =  obj->variant.fileVariant.fileSize / dev->nDataBytesPerChunk + 1;
+ 	x = lastChunk >> YAFFS_TNODES_LEVEL0_BITS;
+ 	requiredTallness = 0;
+-	while (x> 0) {
++	while (x > 0) {
+ 		x >>= YAFFS_TNODES_INTERNAL_BITS;
+ 		requiredTallness++;
+ 	}
+ 
+ 	actualTallness = obj->variant.fileVariant.topLevel;
+ 
+-	if(requiredTallness > actualTallness )
++	if (requiredTallness > actualTallness)
+ 		T(YAFFS_TRACE_VERIFY,
+ 		(TSTR("Obj %d had tnode tallness %d, needs to be %d"TENDSTR),
+-		 obj->objectId,actualTallness, requiredTallness));
++		 obj->objectId, actualTallness, requiredTallness));
+ 
+ 
+ 	/* Check that the chunks in the tnode tree are all correct.
+@@ -680,39 +686,31 @@ static void yaffs_VerifyFile(yaffs_Objec
+ 	 * checking the tags for every chunk match.
+ 	 */
+ 
+-	if(yaffs_SkipNANDVerification(dev))
++	if (yaffs_SkipNANDVerification(dev))
+ 		return;
+ 
+-	for(i = 1; i <= lastChunk; i++){
+-		tn = yaffs_FindLevel0Tnode(dev, &obj->variant.fileVariant,i);
++	for (i = 1; i <= lastChunk; i++) {
++		tn = yaffs_FindLevel0Tnode(dev, &obj->variant.fileVariant, i);
+ 
+ 		if (tn) {
+-			__u32 theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
+-			if(theChunk > 0){
++			__u32 theChunk = yaffs_GetChunkGroupBase(dev, tn, i);
++			if (theChunk > 0) {
+ 				/* T(~0,(TSTR("verifying (%d:%d) %d"TENDSTR),objectId,i,theChunk)); */
+-				yaffs_ReadChunkWithTagsFromNAND(dev,theChunk,NULL, &tags);
+-				if(tags.objectId != objectId || tags.chunkId != i){
+-					T(~0,(TSTR("Object %d chunkId %d NAND mismatch chunk %d tags (%d:%d)"TENDSTR),
++				yaffs_ReadChunkWithTagsFromNAND(dev, theChunk, NULL, &tags);
++				if (tags.objectId != objectId || tags.chunkId != i) {
++					T(~0, (TSTR("Object %d chunkId %d NAND mismatch chunk %d tags (%d:%d)"TENDSTR),
+ 						objectId, i, theChunk,
+ 						tags.objectId, tags.chunkId));
+ 				}
+ 			}
+ 		}
+-
+ 	}
+-
+ }
+ 
+-static void yaffs_VerifyDirectory(yaffs_Object *obj)
+-{
+-	if(obj && yaffs_SkipVerification(obj->myDev))
+-		return;
+-
+-}
+ 
+ static void yaffs_VerifyHardLink(yaffs_Object *obj)
+ {
+-	if(obj && yaffs_SkipVerification(obj->myDev))
++	if (obj && yaffs_SkipVerification(obj->myDev))
+ 		return;
+ 
+ 	/* Verify sane equivalent object */
+@@ -720,7 +718,7 @@ static void yaffs_VerifyHardLink(yaffs_O
+ 
+ static void yaffs_VerifySymlink(yaffs_Object *obj)
+ {
+-	if(obj && yaffs_SkipVerification(obj->myDev))
++	if (obj && yaffs_SkipVerification(obj->myDev))
+ 		return;
+ 
+ 	/* Verify symlink string */
+@@ -728,7 +726,7 @@ static void yaffs_VerifySymlink(yaffs_Ob
+ 
+ static void yaffs_VerifySpecial(yaffs_Object *obj)
+ {
+-	if(obj && yaffs_SkipVerification(obj->myDev))
++	if (obj && yaffs_SkipVerification(obj->myDev))
+ 		return;
+ }
+ 
+@@ -740,14 +738,19 @@ static void yaffs_VerifyObject(yaffs_Obj
+ 	__u32 chunkMax;
+ 
+ 	__u32 chunkIdOk;
+-	__u32 chunkIsLive;
++	__u32 chunkInRange;
++	__u32 chunkShouldNotBeDeleted;
++	__u32 chunkValid;
++
++	if (!obj)
++		return;
+ 
+-	if(!obj)
++	if (obj->beingCreated)
+ 		return;
+ 
+ 	dev = obj->myDev;
+ 
+-	if(yaffs_SkipVerification(dev))
++	if (yaffs_SkipVerification(dev))
+ 		return;
+ 
+ 	/* Check sane object header chunk */
+@@ -755,50 +758,54 @@ static void yaffs_VerifyObject(yaffs_Obj
+ 	chunkMin = dev->internalStartBlock * dev->nChunksPerBlock;
+ 	chunkMax = (dev->internalEndBlock+1) * dev->nChunksPerBlock - 1;
+ 
+-	chunkIdOk = (obj->chunkId >= chunkMin && obj->chunkId <= chunkMax);
+-	chunkIsLive = chunkIdOk &&
++	chunkInRange = (((unsigned)(obj->hdrChunk)) >= chunkMin && ((unsigned)(obj->hdrChunk)) <= chunkMax);
++	chunkIdOk = chunkInRange || obj->hdrChunk == 0;
++	chunkValid = chunkInRange &&
+ 			yaffs_CheckChunkBit(dev,
+-					    obj->chunkId / dev->nChunksPerBlock,
+-					    obj->chunkId % dev->nChunksPerBlock);
+-	if(!obj->fake &&
+-	    (!chunkIdOk || !chunkIsLive)) {
+-	   T(YAFFS_TRACE_VERIFY,
+-	   (TSTR("Obj %d has chunkId %d %s %s"TENDSTR),
+-	   obj->objectId,obj->chunkId,
+-	   chunkIdOk ? "" : ",out of range",
+-	   chunkIsLive || !chunkIdOk ? "" : ",marked as deleted"));
++					obj->hdrChunk / dev->nChunksPerBlock,
++					obj->hdrChunk % dev->nChunksPerBlock);
++	chunkShouldNotBeDeleted = chunkInRange && !chunkValid;
++
++	if (!obj->fake &&
++			(!chunkIdOk || chunkShouldNotBeDeleted)) {
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d has chunkId %d %s %s"TENDSTR),
++			obj->objectId, obj->hdrChunk,
++			chunkIdOk ? "" : ",out of range",
++			chunkShouldNotBeDeleted ? ",marked as deleted" : ""));
+ 	}
+ 
+-	if(chunkIdOk && chunkIsLive &&!yaffs_SkipNANDVerification(dev)) {
++	if (chunkValid && !yaffs_SkipNANDVerification(dev)) {
+ 		yaffs_ExtendedTags tags;
+ 		yaffs_ObjectHeader *oh;
+-		__u8 *buffer = yaffs_GetTempBuffer(dev,__LINE__);
++		__u8 *buffer = yaffs_GetTempBuffer(dev, __LINE__);
+ 
+ 		oh = (yaffs_ObjectHeader *)buffer;
+ 
+-		yaffs_ReadChunkWithTagsFromNAND(dev, obj->chunkId,buffer, &tags);
++		yaffs_ReadChunkWithTagsFromNAND(dev, obj->hdrChunk, buffer,
++				&tags);
+ 
+-		yaffs_VerifyObjectHeader(obj,oh,&tags,1);
++		yaffs_VerifyObjectHeader(obj, oh, &tags, 1);
+ 
+-		yaffs_ReleaseTempBuffer(dev,buffer,__LINE__);
++		yaffs_ReleaseTempBuffer(dev, buffer, __LINE__);
+ 	}
+ 
+ 	/* Verify it has a parent */
+-	if(obj && !obj->fake &&
+-	   (!obj->parent || obj->parent->myDev != dev)){
+-	   T(YAFFS_TRACE_VERIFY,
+-	   (TSTR("Obj %d has parent pointer %p which does not look like an object"TENDSTR),
+-	   obj->objectId,obj->parent));
++	if (obj && !obj->fake &&
++			(!obj->parent || obj->parent->myDev != dev)) {
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d has parent pointer %p which does not look like an object"TENDSTR),
++			obj->objectId, obj->parent));
+ 	}
+ 
+ 	/* Verify parent is a directory */
+-	if(obj->parent && obj->parent->variantType != YAFFS_OBJECT_TYPE_DIRECTORY){
+-	   T(YAFFS_TRACE_VERIFY,
+-	   (TSTR("Obj %d's parent is not a directory (type %d)"TENDSTR),
+-	   obj->objectId,obj->parent->variantType));
++	if (obj->parent && obj->parent->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d's parent is not a directory (type %d)"TENDSTR),
++			obj->objectId, obj->parent->variantType));
+ 	}
+ 
+-	switch(obj->variantType){
++	switch (obj->variantType) {
+ 	case YAFFS_OBJECT_TYPE_FILE:
+ 		yaffs_VerifyFile(obj);
+ 		break;
+@@ -818,33 +825,30 @@ static void yaffs_VerifyObject(yaffs_Obj
+ 	default:
+ 		T(YAFFS_TRACE_VERIFY,
+ 		(TSTR("Obj %d has illegaltype %d"TENDSTR),
+-		obj->objectId,obj->variantType));
++		obj->objectId, obj->variantType));
+ 		break;
+ 	}
+-
+-
+ }
+ 
+ static void yaffs_VerifyObjects(yaffs_Device *dev)
+ {
+ 	yaffs_Object *obj;
+ 	int i;
+-	struct list_head *lh;
++	struct ylist_head *lh;
+ 
+-	if(yaffs_SkipVerification(dev))
++	if (yaffs_SkipVerification(dev))
+ 		return;
+ 
+ 	/* Iterate through the objects in each hash entry */
+ 
+-	 for(i = 0; i <  YAFFS_NOBJECT_BUCKETS; i++){
+-	 	list_for_each(lh, &dev->objectBucket[i].list) {
++	for (i = 0; i <  YAFFS_NOBJECT_BUCKETS; i++) {
++		ylist_for_each(lh, &dev->objectBucket[i].list) {
+ 			if (lh) {
+-				obj = list_entry(lh, yaffs_Object, hashLink);
++				obj = ylist_entry(lh, yaffs_Object, hashLink);
+ 				yaffs_VerifyObject(obj);
+ 			}
+ 		}
+-	 }
+-
++	}
+ }
+ 
+ 
+@@ -855,19 +859,20 @@ static void yaffs_VerifyObjects(yaffs_De
+ static Y_INLINE int yaffs_HashFunction(int n)
+ {
+ 	n = abs(n);
+-	return (n % YAFFS_NOBJECT_BUCKETS);
++	return n % YAFFS_NOBJECT_BUCKETS;
+ }
+ 
+ /*
+- * Access functions to useful fake objects
++ * Access functions to useful fake objects.
++ * Note that root might have a presence in NAND if permissions are set.
+  */
+ 
+-yaffs_Object *yaffs_Root(yaffs_Device * dev)
++yaffs_Object *yaffs_Root(yaffs_Device *dev)
+ {
+ 	return dev->rootDir;
+ }
+ 
+-yaffs_Object *yaffs_LostNFound(yaffs_Device * dev)
++yaffs_Object *yaffs_LostNFound(yaffs_Device *dev)
+ {
+ 	return dev->lostNFoundDir;
+ }
+@@ -877,7 +882,7 @@ yaffs_Object *yaffs_LostNFound(yaffs_Dev
+  *  Erased NAND checking functions
+  */
+ 
+-int yaffs_CheckFF(__u8 * buffer, int nBytes)
++int yaffs_CheckFF(__u8 *buffer, int nBytes)
+ {
+ 	/* Horrible, slow implementation */
+ 	while (nBytes--) {
+@@ -889,9 +894,8 @@ int yaffs_CheckFF(__u8 * buffer, int nBy
+ }
+ 
+ static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev,
+-				  int chunkInNAND)
++				int chunkInNAND)
+ {
+-
+ 	int retval = YAFFS_OK;
+ 	__u8 *data = yaffs_GetTempBuffer(dev, __LINE__);
+ 	yaffs_ExtendedTags tags;
+@@ -899,10 +903,9 @@ static int yaffs_CheckChunkErased(struct
+ 
+ 	result = yaffs_ReadChunkWithTagsFromNAND(dev, chunkInNAND, data, &tags);
+ 
+-	if(tags.eccResult > YAFFS_ECC_RESULT_NO_ERROR)
++	if (tags.eccResult > YAFFS_ECC_RESULT_NO_ERROR)
+ 		retval = YAFFS_FAIL;
+ 
+-
+ 	if (!yaffs_CheckFF(data, dev->nDataBytesPerChunk) || tags.chunkUsed) {
+ 		T(YAFFS_TRACE_NANDACCESS,
+ 		  (TSTR("Chunk %d not erased" TENDSTR), chunkInNAND));
+@@ -915,11 +918,10 @@ static int yaffs_CheckChunkErased(struct
+ 
+ }
+ 
+-
+ static int yaffs_WriteNewChunkWithTagsToNAND(struct yaffs_DeviceStruct *dev,
+-					     const __u8 * data,
+-					     yaffs_ExtendedTags * tags,
+-					     int useReserve)
++					const __u8 *data,
++					yaffs_ExtendedTags *tags,
++					int useReserve)
+ {
+ 	int attempts = 0;
+ 	int writeOk = 0;
+@@ -972,7 +974,7 @@ static int yaffs_WriteNewChunkWithTagsTo
+ 			erasedOk = yaffs_CheckChunkErased(dev, chunk);
+ 			if (erasedOk != YAFFS_OK) {
+ 				T(YAFFS_TRACE_ERROR,
+-				(TSTR ("**>> yaffs chunk %d was not erased"
++				(TSTR("**>> yaffs chunk %d was not erased"
+ 				TENDSTR), chunk));
+ 
+ 				/* try another chunk */
+@@ -992,7 +994,11 @@ static int yaffs_WriteNewChunkWithTagsTo
+ 		/* Copy the data into the robustification buffer */
+ 		yaffs_HandleWriteChunkOk(dev, chunk, data, tags);
+ 
+-	} while (writeOk != YAFFS_OK && attempts < yaffs_wr_attempts);
++	} while (writeOk != YAFFS_OK &&
++		(yaffs_wr_attempts <= 0 || attempts <= yaffs_wr_attempts));
++
++	if (!writeOk)
++		chunk = -1;
+ 
+ 	if (attempts > 1) {
+ 		T(YAFFS_TRACE_ERROR,
+@@ -1009,13 +1015,35 @@ static int yaffs_WriteNewChunkWithTagsTo
+  * Block retiring for handling a broken block.
+  */
+ 
+-static void yaffs_RetireBlock(yaffs_Device * dev, int blockInNAND)
++static void yaffs_RetireBlock(yaffs_Device *dev, int blockInNAND)
+ {
+ 	yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, blockInNAND);
+ 
+ 	yaffs_InvalidateCheckpoint(dev);
+ 
+-	yaffs_MarkBlockBad(dev, blockInNAND);
++	if (yaffs_MarkBlockBad(dev, blockInNAND) != YAFFS_OK) {
++		if (yaffs_EraseBlockInNAND(dev, blockInNAND) != YAFFS_OK) {
++			T(YAFFS_TRACE_ALWAYS, (TSTR(
++				"yaffs: Failed to mark bad and erase block %d"
++				TENDSTR), blockInNAND));
++		} else {
++			yaffs_ExtendedTags tags;
++			int chunkId = blockInNAND * dev->nChunksPerBlock;
++
++			__u8 *buffer = yaffs_GetTempBuffer(dev, __LINE__);
++
++			memset(buffer, 0xff, dev->nDataBytesPerChunk);
++			yaffs_InitialiseTags(&tags);
++			tags.sequenceNumber = YAFFS_SEQUENCE_BAD_BLOCK;
++			if (dev->writeChunkWithTagsToNAND(dev, chunkId -
++				dev->chunkOffset, buffer, &tags) != YAFFS_OK)
++				T(YAFFS_TRACE_ALWAYS, (TSTR("yaffs: Failed to "
++					TCONT("write bad block marker to block %d")
++					TENDSTR), blockInNAND));
++
++			yaffs_ReleaseTempBuffer(dev, buffer, __LINE__);
++		}
++	}
+ 
+ 	bi->blockState = YAFFS_BLOCK_STATE_DEAD;
+ 	bi->gcPrioritise = 0;
+@@ -1029,49 +1057,45 @@ static void yaffs_RetireBlock(yaffs_Devi
+  *
+  */
+ 
+-static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+-				     const __u8 * data,
+-				     const yaffs_ExtendedTags * tags)
++static void yaffs_HandleWriteChunkOk(yaffs_Device *dev, int chunkInNAND,
++				const __u8 *data,
++				const yaffs_ExtendedTags *tags)
+ {
+ }
+ 
+-static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+-				    const yaffs_ExtendedTags * tags)
++static void yaffs_HandleUpdateChunk(yaffs_Device *dev, int chunkInNAND,
++				const yaffs_ExtendedTags *tags)
+ {
+ }
+ 
+ void yaffs_HandleChunkError(yaffs_Device *dev, yaffs_BlockInfo *bi)
+ {
+-	if(!bi->gcPrioritise){
++	if (!bi->gcPrioritise) {
+ 		bi->gcPrioritise = 1;
+ 		dev->hasPendingPrioritisedGCs = 1;
+-		bi->chunkErrorStrikes ++;
++		bi->chunkErrorStrikes++;
+ 
+-		if(bi->chunkErrorStrikes > 3){
++		if (bi->chunkErrorStrikes > 3) {
+ 			bi->needsRetiring = 1; /* Too many stikes, so retire this */
+ 			T(YAFFS_TRACE_ALWAYS, (TSTR("yaffs: Block struck out" TENDSTR)));
+ 
+ 		}
+-
+ 	}
+ }
+ 
+-static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND, int erasedOk)
++static void yaffs_HandleWriteChunkError(yaffs_Device *dev, int chunkInNAND,
++		int erasedOk)
+ {
+-
+ 	int blockInNAND = chunkInNAND / dev->nChunksPerBlock;
+ 	yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, blockInNAND);
+ 
+-	yaffs_HandleChunkError(dev,bi);
++	yaffs_HandleChunkError(dev, bi);
+ 
+-
+-	if(erasedOk ) {
++	if (erasedOk) {
+ 		/* Was an actual write failure, so mark the block for retirement  */
+ 		bi->needsRetiring = 1;
+ 		T(YAFFS_TRACE_ERROR | YAFFS_TRACE_BAD_BLOCKS,
+ 		  (TSTR("**>> Block %d needs retiring" TENDSTR), blockInNAND));
+-
+-
+ 	}
+ 
+ 	/* Delete the chunk */
+@@ -1081,12 +1105,12 @@ static void yaffs_HandleWriteChunkError(
+ 
+ /*---------------- Name handling functions ------------*/
+ 
+-static __u16 yaffs_CalcNameSum(const YCHAR * name)
++static __u16 yaffs_CalcNameSum(const YCHAR *name)
+ {
+ 	__u16 sum = 0;
+ 	__u16 i = 1;
+ 
+-	YUCHAR *bname = (YUCHAR *) name;
++	const YUCHAR *bname = (const YUCHAR *) name;
+ 	if (bname) {
+ 		while ((*bname) && (i < (YAFFS_MAX_NAME_LENGTH/2))) {
+ 
+@@ -1102,14 +1126,14 @@ static __u16 yaffs_CalcNameSum(const YCH
+ 	return sum;
+ }
+ 
+-static void yaffs_SetObjectName(yaffs_Object * obj, const YCHAR * name)
++static void yaffs_SetObjectName(yaffs_Object *obj, const YCHAR *name)
+ {
+ #ifdef CONFIG_YAFFS_SHORT_NAMES_IN_RAM
+-	if (name && yaffs_strlen(name) <= YAFFS_SHORT_NAME_LENGTH) {
++	memset(obj->shortName, 0, sizeof(YCHAR) * (YAFFS_SHORT_NAME_LENGTH+1));
++	if (name && yaffs_strlen(name) <= YAFFS_SHORT_NAME_LENGTH)
+ 		yaffs_strcpy(obj->shortName, name);
+-	} else {
++	else
+ 		obj->shortName[0] = _Y('\0');
+-	}
+ #endif
+ 	obj->sum = yaffs_CalcNameSum(name);
+ }
+@@ -1126,7 +1150,7 @@ static void yaffs_SetObjectName(yaffs_Ob
+  * Don't use this function directly
+  */
+ 
+-static int yaffs_CreateTnodes(yaffs_Device * dev, int nTnodes)
++static int yaffs_CreateTnodes(yaffs_Device *dev, int nTnodes)
+ {
+ 	int i;
+ 	int tnodeSize;
+@@ -1143,6 +1167,9 @@ static int yaffs_CreateTnodes(yaffs_Devi
+ 	 * Must be a multiple of 32-bits  */
+ 	tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
+ 
++	if (tnodeSize < sizeof(yaffs_Tnode))
++		tnodeSize = sizeof(yaffs_Tnode);
++
+ 	/* make these things */
+ 
+ 	newTnodes = YMALLOC(nTnodes * tnodeSize);
+@@ -1150,7 +1177,7 @@ static int yaffs_CreateTnodes(yaffs_Devi
+ 
+ 	if (!newTnodes) {
+ 		T(YAFFS_TRACE_ERROR,
+-		  (TSTR("yaffs: Could not allocate Tnodes" TENDSTR)));
++			(TSTR("yaffs: Could not allocate Tnodes" TENDSTR)));
+ 		return YAFFS_FAIL;
+ 	}
+ 
+@@ -1170,7 +1197,7 @@ static int yaffs_CreateTnodes(yaffs_Devi
+ 	dev->freeTnodes = newTnodes;
+ #else
+ 	/* New hookup for wide tnodes */
+-	for(i = 0; i < nTnodes -1; i++) {
++	for (i = 0; i < nTnodes - 1; i++) {
+ 		curr = (yaffs_Tnode *) &mem[i * tnodeSize];
+ 		next = (yaffs_Tnode *) &mem[(i+1) * tnodeSize];
+ 		curr->internal[0] = next;
+@@ -1197,7 +1224,6 @@ static int yaffs_CreateTnodes(yaffs_Devi
+ 		  (TSTR
+ 		   ("yaffs: Could not add tnodes to management list" TENDSTR)));
+ 		   return YAFFS_FAIL;
+-
+ 	} else {
+ 		tnl->tnodes = newTnodes;
+ 		tnl->next = dev->allocatedTnodeList;
+@@ -1211,14 +1237,13 @@ static int yaffs_CreateTnodes(yaffs_Devi
+ 
+ /* GetTnode gets us a clean tnode. Tries to make allocate more if we run out */
+ 
+-static yaffs_Tnode *yaffs_GetTnodeRaw(yaffs_Device * dev)
++static yaffs_Tnode *yaffs_GetTnodeRaw(yaffs_Device *dev)
+ {
+ 	yaffs_Tnode *tn = NULL;
+ 
+ 	/* If there are none left make more */
+-	if (!dev->freeTnodes) {
++	if (!dev->freeTnodes)
+ 		yaffs_CreateTnodes(dev, YAFFS_ALLOCATION_NTNODES);
+-	}
+ 
+ 	if (dev->freeTnodes) {
+ 		tn = dev->freeTnodes;
+@@ -1233,21 +1258,27 @@ static yaffs_Tnode *yaffs_GetTnodeRaw(ya
+ 		dev->nFreeTnodes--;
+ 	}
+ 
++	dev->nCheckpointBlocksRequired = 0; /* force recalculation*/
++
+ 	return tn;
+ }
+ 
+-static yaffs_Tnode *yaffs_GetTnode(yaffs_Device * dev)
++static yaffs_Tnode *yaffs_GetTnode(yaffs_Device *dev)
+ {
+ 	yaffs_Tnode *tn = yaffs_GetTnodeRaw(dev);
++	int tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
+ 
+-	if(tn)
+-		memset(tn, 0, (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8);
++	if (tnodeSize < sizeof(yaffs_Tnode))
++		tnodeSize = sizeof(yaffs_Tnode);
++
++	if (tn)
++		memset(tn, 0, tnodeSize);
+ 
+ 	return tn;
+ }
+ 
+ /* FreeTnode frees up a tnode and puts it back on the free list */
+-static void yaffs_FreeTnode(yaffs_Device * dev, yaffs_Tnode * tn)
++static void yaffs_FreeTnode(yaffs_Device *dev, yaffs_Tnode *tn)
+ {
+ 	if (tn) {
+ #ifdef CONFIG_YAFFS_TNODE_LIST_DEBUG
+@@ -1262,9 +1293,10 @@ static void yaffs_FreeTnode(yaffs_Device
+ 		dev->freeTnodes = tn;
+ 		dev->nFreeTnodes++;
+ 	}
++	dev->nCheckpointBlocksRequired = 0; /* force recalculation*/
+ }
+ 
+-static void yaffs_DeinitialiseTnodes(yaffs_Device * dev)
++static void yaffs_DeinitialiseTnodes(yaffs_Device *dev)
+ {
+ 	/* Free the list of allocated tnodes */
+ 	yaffs_TnodeList *tmp;
+@@ -1282,71 +1314,72 @@ static void yaffs_DeinitialiseTnodes(yaf
+ 	dev->nFreeTnodes = 0;
+ }
+ 
+-static void yaffs_InitialiseTnodes(yaffs_Device * dev)
++static void yaffs_InitialiseTnodes(yaffs_Device *dev)
+ {
+ 	dev->allocatedTnodeList = NULL;
+ 	dev->freeTnodes = NULL;
+ 	dev->nFreeTnodes = 0;
+ 	dev->nTnodesCreated = 0;
+-
+ }
+ 
+ 
+-void yaffs_PutLevel0Tnode(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos, unsigned val)
++void yaffs_PutLevel0Tnode(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos,
++		unsigned val)
+ {
+-  __u32 *map = (__u32 *)tn;
+-  __u32 bitInMap;
+-  __u32 bitInWord;
+-  __u32 wordInMap;
+-  __u32 mask;
++	__u32 *map = (__u32 *)tn;
++	__u32 bitInMap;
++	__u32 bitInWord;
++	__u32 wordInMap;
++	__u32 mask;
+ 
+-  pos &= YAFFS_TNODES_LEVEL0_MASK;
+-  val >>= dev->chunkGroupBits;
++	pos &= YAFFS_TNODES_LEVEL0_MASK;
++	val >>= dev->chunkGroupBits;
+ 
+-  bitInMap = pos * dev->tnodeWidth;
+-  wordInMap = bitInMap /32;
+-  bitInWord = bitInMap & (32 -1);
++	bitInMap = pos * dev->tnodeWidth;
++	wordInMap = bitInMap / 32;
++	bitInWord = bitInMap & (32 - 1);
+ 
+-  mask = dev->tnodeMask << bitInWord;
++	mask = dev->tnodeMask << bitInWord;
+ 
+-  map[wordInMap] &= ~mask;
+-  map[wordInMap] |= (mask & (val << bitInWord));
++	map[wordInMap] &= ~mask;
++	map[wordInMap] |= (mask & (val << bitInWord));
+ 
+-  if(dev->tnodeWidth > (32-bitInWord)) {
+-    bitInWord = (32 - bitInWord);
+-    wordInMap++;;
+-    mask = dev->tnodeMask >> (/*dev->tnodeWidth -*/ bitInWord);
+-    map[wordInMap] &= ~mask;
+-    map[wordInMap] |= (mask & (val >> bitInWord));
+-  }
++	if (dev->tnodeWidth > (32 - bitInWord)) {
++		bitInWord = (32 - bitInWord);
++		wordInMap++;;
++		mask = dev->tnodeMask >> (/*dev->tnodeWidth -*/ bitInWord);
++		map[wordInMap] &= ~mask;
++		map[wordInMap] |= (mask & (val >> bitInWord));
++	}
+ }
+ 
+-static __u32 yaffs_GetChunkGroupBase(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos)
++static __u32 yaffs_GetChunkGroupBase(yaffs_Device *dev, yaffs_Tnode *tn,
++		unsigned pos)
+ {
+-  __u32 *map = (__u32 *)tn;
+-  __u32 bitInMap;
+-  __u32 bitInWord;
+-  __u32 wordInMap;
+-  __u32 val;
++	__u32 *map = (__u32 *)tn;
++	__u32 bitInMap;
++	__u32 bitInWord;
++	__u32 wordInMap;
++	__u32 val;
+ 
+-  pos &= YAFFS_TNODES_LEVEL0_MASK;
++	pos &= YAFFS_TNODES_LEVEL0_MASK;
+ 
+-  bitInMap = pos * dev->tnodeWidth;
+-  wordInMap = bitInMap /32;
+-  bitInWord = bitInMap & (32 -1);
++	bitInMap = pos * dev->tnodeWidth;
++	wordInMap = bitInMap / 32;
++	bitInWord = bitInMap & (32 - 1);
+ 
+-  val = map[wordInMap] >> bitInWord;
++	val = map[wordInMap] >> bitInWord;
+ 
+-  if(dev->tnodeWidth > (32-bitInWord)) {
+-    bitInWord = (32 - bitInWord);
+-    wordInMap++;;
+-    val |= (map[wordInMap] << bitInWord);
+-  }
++	if	(dev->tnodeWidth > (32 - bitInWord)) {
++		bitInWord = (32 - bitInWord);
++		wordInMap++;;
++		val |= (map[wordInMap] << bitInWord);
++	}
+ 
+-  val &= dev->tnodeMask;
+-  val <<= dev->chunkGroupBits;
++	val &= dev->tnodeMask;
++	val <<= dev->chunkGroupBits;
+ 
+-  return val;
++	return val;
+ }
+ 
+ /* ------------------- End of individual tnode manipulation -----------------*/
+@@ -1357,24 +1390,21 @@ static __u32 yaffs_GetChunkGroupBase(yaf
+  */
+ 
+ /* FindLevel0Tnode finds the level 0 tnode, if one exists. */
+-static yaffs_Tnode *yaffs_FindLevel0Tnode(yaffs_Device * dev,
+-					  yaffs_FileStructure * fStruct,
+-					  __u32 chunkId)
++static yaffs_Tnode *yaffs_FindLevel0Tnode(yaffs_Device *dev,
++					yaffs_FileStructure *fStruct,
++					__u32 chunkId)
+ {
+-
+ 	yaffs_Tnode *tn = fStruct->top;
+ 	__u32 i;
+ 	int requiredTallness;
+ 	int level = fStruct->topLevel;
+ 
+ 	/* Check sane level and chunk Id */
+-	if (level < 0 || level > YAFFS_TNODES_MAX_LEVEL) {
++	if (level < 0 || level > YAFFS_TNODES_MAX_LEVEL)
+ 		return NULL;
+-	}
+ 
+-	if (chunkId > YAFFS_MAX_CHUNK_ID) {
++	if (chunkId > YAFFS_MAX_CHUNK_ID)
+ 		return NULL;
+-	}
+ 
+ 	/* First check we're tall enough (ie enough topLevel) */
+ 
+@@ -1385,22 +1415,17 @@ static yaffs_Tnode *yaffs_FindLevel0Tnod
+ 		requiredTallness++;
+ 	}
+ 
+-	if (requiredTallness > fStruct->topLevel) {
+-		/* Not tall enough, so we can't find it, return NULL. */
+-		return NULL;
+-	}
++	if (requiredTallness > fStruct->topLevel)
++		return NULL; /* Not tall enough, so we can't find it */
+ 
+ 	/* Traverse down to level 0 */
+ 	while (level > 0 && tn) {
+-		tn = tn->
+-		    internal[(chunkId >>
+-			       ( YAFFS_TNODES_LEVEL0_BITS +
+-			         (level - 1) *
+-			         YAFFS_TNODES_INTERNAL_BITS)
+-			      ) &
+-			     YAFFS_TNODES_INTERNAL_MASK];
++		tn = tn->internal[(chunkId >>
++			(YAFFS_TNODES_LEVEL0_BITS +
++				(level - 1) *
++				YAFFS_TNODES_INTERNAL_BITS)) &
++			YAFFS_TNODES_INTERNAL_MASK];
+ 		level--;
+-
+ 	}
+ 
+ 	return tn;
+@@ -1417,12 +1442,11 @@ static yaffs_Tnode *yaffs_FindLevel0Tnod
+  *  be plugged into the ttree.
+  */
+ 
+-static yaffs_Tnode *yaffs_AddOrFindLevel0Tnode(yaffs_Device * dev,
+-					       yaffs_FileStructure * fStruct,
+-					       __u32 chunkId,
+-					       yaffs_Tnode *passedTn)
++static yaffs_Tnode *yaffs_AddOrFindLevel0Tnode(yaffs_Device *dev,
++					yaffs_FileStructure *fStruct,
++					__u32 chunkId,
++					yaffs_Tnode *passedTn)
+ {
+-
+ 	int requiredTallness;
+ 	int i;
+ 	int l;
+@@ -1432,13 +1456,11 @@ static yaffs_Tnode *yaffs_AddOrFindLevel
+ 
+ 
+ 	/* Check sane level and page Id */
+-	if (fStruct->topLevel < 0 || fStruct->topLevel > YAFFS_TNODES_MAX_LEVEL) {
++	if (fStruct->topLevel < 0 || fStruct->topLevel > YAFFS_TNODES_MAX_LEVEL)
+ 		return NULL;
+-	}
+ 
+-	if (chunkId > YAFFS_MAX_CHUNK_ID) {
++	if (chunkId > YAFFS_MAX_CHUNK_ID)
+ 		return NULL;
+-	}
+ 
+ 	/* First check we're tall enough (ie enough topLevel) */
+ 
+@@ -1451,7 +1473,7 @@ static yaffs_Tnode *yaffs_AddOrFindLevel
+ 
+ 
+ 	if (requiredTallness > fStruct->topLevel) {
+-		/* Not tall enough,gotta make the tree taller */
++		/* Not tall enough, gotta make the tree taller */
+ 		for (i = fStruct->topLevel; i < requiredTallness; i++) {
+ 
+ 			tn = yaffs_GetTnode(dev);
+@@ -1473,27 +1495,27 @@ static yaffs_Tnode *yaffs_AddOrFindLevel
+ 	l = fStruct->topLevel;
+ 	tn = fStruct->top;
+ 
+-	if(l > 0) {
++	if (l > 0) {
+ 		while (l > 0 && tn) {
+ 			x = (chunkId >>
+-			     ( YAFFS_TNODES_LEVEL0_BITS +
++			     (YAFFS_TNODES_LEVEL0_BITS +
+ 			      (l - 1) * YAFFS_TNODES_INTERNAL_BITS)) &
+ 			    YAFFS_TNODES_INTERNAL_MASK;
+ 
+ 
+-			if((l>1) && !tn->internal[x]){
++			if ((l > 1) && !tn->internal[x]) {
+ 				/* Add missing non-level-zero tnode */
+ 				tn->internal[x] = yaffs_GetTnode(dev);
+ 
+-			} else if(l == 1) {
++			} else if (l == 1) {
+ 				/* Looking from level 1 at level 0 */
+-			 	if (passedTn) {
++				if (passedTn) {
+ 					/* If we already have one, then release it.*/
+-					if(tn->internal[x])
+-						yaffs_FreeTnode(dev,tn->internal[x]);
++					if (tn->internal[x])
++						yaffs_FreeTnode(dev, tn->internal[x]);
+ 					tn->internal[x] = passedTn;
+ 
+-				} else if(!tn->internal[x]) {
++				} else if (!tn->internal[x]) {
+ 					/* Don't have one, none passed in */
+ 					tn->internal[x] = yaffs_GetTnode(dev);
+ 				}
+@@ -1504,31 +1526,29 @@ static yaffs_Tnode *yaffs_AddOrFindLevel
+ 		}
+ 	} else {
+ 		/* top is level 0 */
+-		if(passedTn) {
+-			memcpy(tn,passedTn,(dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8);
+-			yaffs_FreeTnode(dev,passedTn);
++		if (passedTn) {
++			memcpy(tn, passedTn, (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8);
++			yaffs_FreeTnode(dev, passedTn);
+ 		}
+ 	}
+ 
+ 	return tn;
+ }
+ 
+-static int yaffs_FindChunkInGroup(yaffs_Device * dev, int theChunk,
+-				  yaffs_ExtendedTags * tags, int objectId,
+-				  int chunkInInode)
++static int yaffs_FindChunkInGroup(yaffs_Device *dev, int theChunk,
++				yaffs_ExtendedTags *tags, int objectId,
++				int chunkInInode)
+ {
+ 	int j;
+ 
+ 	for (j = 0; theChunk && j < dev->chunkGroupSize; j++) {
+-		if (yaffs_CheckChunkBit
+-		    (dev, theChunk / dev->nChunksPerBlock,
+-		     theChunk % dev->nChunksPerBlock)) {
++		if (yaffs_CheckChunkBit(dev, theChunk / dev->nChunksPerBlock,
++				theChunk % dev->nChunksPerBlock)) {
+ 			yaffs_ReadChunkWithTagsFromNAND(dev, theChunk, NULL,
+ 							tags);
+ 			if (yaffs_TagsMatch(tags, objectId, chunkInInode)) {
+ 				/* found it; */
+ 				return theChunk;
+-
+ 			}
+ 		}
+ 		theChunk++;
+@@ -1543,7 +1563,7 @@ static int yaffs_FindChunkInGroup(yaffs_
+  * Returns 0 if it stopped early due to hitting the limit and the delete is incomplete.
+  */
+ 
+-static int yaffs_DeleteWorker(yaffs_Object * in, yaffs_Tnode * tn, __u32 level,
++static int yaffs_DeleteWorker(yaffs_Object *in, yaffs_Tnode *tn, __u32 level,
+ 			      int chunkOffset, int *limit)
+ {
+ 	int i;
+@@ -1557,7 +1577,6 @@ static int yaffs_DeleteWorker(yaffs_Obje
+ 
+ 	if (tn) {
+ 		if (level > 0) {
+-
+ 			for (i = YAFFS_NTNODES_INTERNAL - 1; allDone && i >= 0;
+ 			     i--) {
+ 				if (tn->internal[i]) {
+@@ -1565,17 +1584,17 @@ static int yaffs_DeleteWorker(yaffs_Obje
+ 						allDone = 0;
+ 					} else {
+ 						allDone =
+-						    yaffs_DeleteWorker(in,
+-								       tn->
+-								       internal
+-								       [i],
+-								       level -
+-								       1,
+-								       (chunkOffset
++							yaffs_DeleteWorker(in,
++								tn->
++								internal
++								[i],
++								level -
++								1,
++								(chunkOffset
+ 									<<
+ 									YAFFS_TNODES_INTERNAL_BITS)
+-								       + i,
+-								       limit);
++								+ i,
++								limit);
+ 					}
+ 					if (allDone) {
+ 						yaffs_FreeTnode(dev,
+@@ -1584,27 +1603,25 @@ static int yaffs_DeleteWorker(yaffs_Obje
+ 						tn->internal[i] = NULL;
+ 					}
+ 				}
+-
+ 			}
+ 			return (allDone) ? 1 : 0;
+ 		} else if (level == 0) {
+ 			int hitLimit = 0;
+ 
+ 			for (i = YAFFS_NTNODES_LEVEL0 - 1; i >= 0 && !hitLimit;
+-			     i--) {
+-			        theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
++					i--) {
++				theChunk = yaffs_GetChunkGroupBase(dev, tn, i);
+ 				if (theChunk) {
+ 
+-					chunkInInode =
+-					    (chunkOffset <<
+-					     YAFFS_TNODES_LEVEL0_BITS) + i;
++					chunkInInode = (chunkOffset <<
++						YAFFS_TNODES_LEVEL0_BITS) + i;
+ 
+ 					foundChunk =
+-					    yaffs_FindChunkInGroup(dev,
+-								   theChunk,
+-								   &tags,
+-								   in->objectId,
+-								   chunkInInode);
++						yaffs_FindChunkInGroup(dev,
++								theChunk,
++								&tags,
++								in->objectId,
++								chunkInInode);
+ 
+ 					if (foundChunk > 0) {
+ 						yaffs_DeleteChunk(dev,
+@@ -1613,14 +1630,13 @@ static int yaffs_DeleteWorker(yaffs_Obje
+ 						in->nDataChunks--;
+ 						if (limit) {
+ 							*limit = *limit - 1;
+-							if (*limit <= 0) {
++							if (*limit <= 0)
+ 								hitLimit = 1;
+-							}
+ 						}
+ 
+ 					}
+ 
+-					yaffs_PutLevel0Tnode(dev,tn,i,0);
++					yaffs_PutLevel0Tnode(dev, tn, i, 0);
+ 				}
+ 
+ 			}
+@@ -1634,9 +1650,8 @@ static int yaffs_DeleteWorker(yaffs_Obje
+ 
+ }
+ 
+-static void yaffs_SoftDeleteChunk(yaffs_Device * dev, int chunk)
++static void yaffs_SoftDeleteChunk(yaffs_Device *dev, int chunk)
+ {
+-
+ 	yaffs_BlockInfo *theBlock;
+ 
+ 	T(YAFFS_TRACE_DELETION, (TSTR("soft delete chunk %d" TENDSTR), chunk));
+@@ -1654,7 +1669,7 @@ static void yaffs_SoftDeleteChunk(yaffs_
+  * Thus, essentially this is the same as DeleteWorker except that the chunks are soft deleted.
+  */
+ 
+-static int yaffs_SoftDeleteWorker(yaffs_Object * in, yaffs_Tnode * tn,
++static int yaffs_SoftDeleteWorker(yaffs_Object *in, yaffs_Tnode *tn,
+ 				  __u32 level, int chunkOffset)
+ {
+ 	int i;
+@@ -1691,14 +1706,14 @@ static int yaffs_SoftDeleteWorker(yaffs_
+ 		} else if (level == 0) {
+ 
+ 			for (i = YAFFS_NTNODES_LEVEL0 - 1; i >= 0; i--) {
+-				theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
++				theChunk = yaffs_GetChunkGroupBase(dev, tn, i);
+ 				if (theChunk) {
+ 					/* Note this does not find the real chunk, only the chunk group.
+ 					 * We make an assumption that a chunk group is not larger than
+ 					 * a block.
+ 					 */
+ 					yaffs_SoftDeleteChunk(dev, theChunk);
+-					yaffs_PutLevel0Tnode(dev,tn,i,0);
++					yaffs_PutLevel0Tnode(dev, tn, i, 0);
+ 				}
+ 
+ 			}
+@@ -1712,7 +1727,7 @@ static int yaffs_SoftDeleteWorker(yaffs_
+ 
+ }
+ 
+-static void yaffs_SoftDeleteFile(yaffs_Object * obj)
++static void yaffs_SoftDeleteFile(yaffs_Object *obj)
+ {
+ 	if (obj->deleted &&
+ 	    obj->variantType == YAFFS_OBJECT_TYPE_FILE && !obj->softDeleted) {
+@@ -1746,8 +1761,8 @@ static void yaffs_SoftDeleteFile(yaffs_O
+  * by a special case.
+  */
+ 
+-static yaffs_Tnode *yaffs_PruneWorker(yaffs_Device * dev, yaffs_Tnode * tn,
+-				      __u32 level, int del0)
++static yaffs_Tnode *yaffs_PruneWorker(yaffs_Device *dev, yaffs_Tnode *tn,
++				__u32 level, int del0)
+ {
+ 	int i;
+ 	int hasData;
+@@ -1763,9 +1778,8 @@ static yaffs_Tnode *yaffs_PruneWorker(ya
+ 						      (i == 0) ? del0 : 1);
+ 			}
+ 
+-			if (tn->internal[i]) {
++			if (tn->internal[i])
+ 				hasData++;
+-			}
+ 		}
+ 
+ 		if (hasData == 0 && del0) {
+@@ -1781,8 +1795,8 @@ static yaffs_Tnode *yaffs_PruneWorker(ya
+ 
+ }
+ 
+-static int yaffs_PruneFileStructure(yaffs_Device * dev,
+-				    yaffs_FileStructure * fStruct)
++static int yaffs_PruneFileStructure(yaffs_Device *dev,
++				yaffs_FileStructure *fStruct)
+ {
+ 	int i;
+ 	int hasData;
+@@ -1805,9 +1819,8 @@ static int yaffs_PruneFileStructure(yaff
+ 
+ 			hasData = 0;
+ 			for (i = 1; i < YAFFS_NTNODES_INTERNAL; i++) {
+-				if (tn->internal[i]) {
++				if (tn->internal[i])
+ 					hasData++;
+-				}
+ 			}
+ 
+ 			if (!hasData) {
+@@ -1828,7 +1841,7 @@ static int yaffs_PruneFileStructure(yaff
+ /* yaffs_CreateFreeObjects creates a bunch more objects and
+  * adds them to the object free list.
+  */
+-static int yaffs_CreateFreeObjects(yaffs_Device * dev, int nObjects)
++static int yaffs_CreateFreeObjects(yaffs_Device *dev, int nObjects)
+ {
+ 	int i;
+ 	yaffs_Object *newObjects;
+@@ -1842,9 +1855,9 @@ static int yaffs_CreateFreeObjects(yaffs
+ 	list = YMALLOC(sizeof(yaffs_ObjectList));
+ 
+ 	if (!newObjects || !list) {
+-		if(newObjects)
++		if (newObjects)
+ 			YFREE(newObjects);
+-		if(list)
++		if (list)
+ 			YFREE(list);
+ 		T(YAFFS_TRACE_ALLOCATE,
+ 		  (TSTR("yaffs: Could not allocate more objects" TENDSTR)));
+@@ -1854,7 +1867,7 @@ static int yaffs_CreateFreeObjects(yaffs
+ 	/* Hook them into the free list */
+ 	for (i = 0; i < nObjects - 1; i++) {
+ 		newObjects[i].siblings.next =
+-		    (struct list_head *)(&newObjects[i + 1]);
++				(struct ylist_head *)(&newObjects[i + 1]);
+ 	}
+ 
+ 	newObjects[nObjects - 1].siblings.next = (void *)dev->freeObjects;
+@@ -1873,85 +1886,109 @@ static int yaffs_CreateFreeObjects(yaffs
+ 
+ 
+ /* AllocateEmptyObject gets us a clean Object. Tries to make allocate more if we run out */
+-static yaffs_Object *yaffs_AllocateEmptyObject(yaffs_Device * dev)
++static yaffs_Object *yaffs_AllocateEmptyObject(yaffs_Device *dev)
+ {
+ 	yaffs_Object *tn = NULL;
+ 
++#ifdef VALGRIND_TEST
++	tn = YMALLOC(sizeof(yaffs_Object));
++#else
+ 	/* If there are none left make more */
+-	if (!dev->freeObjects) {
++	if (!dev->freeObjects)
+ 		yaffs_CreateFreeObjects(dev, YAFFS_ALLOCATION_NOBJECTS);
+-	}
+ 
+ 	if (dev->freeObjects) {
+ 		tn = dev->freeObjects;
+ 		dev->freeObjects =
+-		    (yaffs_Object *) (dev->freeObjects->siblings.next);
++			(yaffs_Object *) (dev->freeObjects->siblings.next);
+ 		dev->nFreeObjects--;
+-
++	}
++#endif
++	if (tn) {
+ 		/* Now sweeten it up... */
+ 
+ 		memset(tn, 0, sizeof(yaffs_Object));
++		tn->beingCreated = 1;
++
+ 		tn->myDev = dev;
+-		tn->chunkId = -1;
++		tn->hdrChunk = 0;
+ 		tn->variantType = YAFFS_OBJECT_TYPE_UNKNOWN;
+-		INIT_LIST_HEAD(&(tn->hardLinks));
+-		INIT_LIST_HEAD(&(tn->hashLink));
+-		INIT_LIST_HEAD(&tn->siblings);
++		YINIT_LIST_HEAD(&(tn->hardLinks));
++		YINIT_LIST_HEAD(&(tn->hashLink));
++		YINIT_LIST_HEAD(&tn->siblings);
++
++
++		/* Now make the directory sane */
++		if (dev->rootDir) {
++			tn->parent = dev->rootDir;
++			ylist_add(&(tn->siblings), &dev->rootDir->variant.directoryVariant.children);
++		}
+ 
+ 		/* Add it to the lost and found directory.
+ 		 * NB Can't put root or lostNFound in lostNFound so
+ 		 * check if lostNFound exists first
+ 		 */
+-		if (dev->lostNFoundDir) {
++		if (dev->lostNFoundDir)
+ 			yaffs_AddObjectToDirectory(dev->lostNFoundDir, tn);
+-		}
++
++		tn->beingCreated = 0;
+ 	}
+ 
++	dev->nCheckpointBlocksRequired = 0; /* force recalculation*/
++
+ 	return tn;
+ }
+ 
+-static yaffs_Object *yaffs_CreateFakeDirectory(yaffs_Device * dev, int number,
++static yaffs_Object *yaffs_CreateFakeDirectory(yaffs_Device *dev, int number,
+ 					       __u32 mode)
+ {
+ 
+ 	yaffs_Object *obj =
+ 	    yaffs_CreateNewObject(dev, number, YAFFS_OBJECT_TYPE_DIRECTORY);
+ 	if (obj) {
+-		obj->fake = 1;		/* it is fake so it has no NAND presence... */
++		obj->fake = 1;		/* it is fake so it might have no NAND presence... */
+ 		obj->renameAllowed = 0;	/* ... and we're not allowed to rename it... */
+ 		obj->unlinkAllowed = 0;	/* ... or unlink it */
+ 		obj->deleted = 0;
+ 		obj->unlinked = 0;
+ 		obj->yst_mode = mode;
+ 		obj->myDev = dev;
+-		obj->chunkId = 0;	/* Not a valid chunk. */
++		obj->hdrChunk = 0;	/* Not a valid chunk. */
+ 	}
+ 
+ 	return obj;
+ 
+ }
+ 
+-static void yaffs_UnhashObject(yaffs_Object * tn)
++static void yaffs_UnhashObject(yaffs_Object *tn)
+ {
+ 	int bucket;
+ 	yaffs_Device *dev = tn->myDev;
+ 
+ 	/* If it is still linked into the bucket list, free from the list */
+-	if (!list_empty(&tn->hashLink)) {
+-		list_del_init(&tn->hashLink);
++	if (!ylist_empty(&tn->hashLink)) {
++		ylist_del_init(&tn->hashLink);
+ 		bucket = yaffs_HashFunction(tn->objectId);
+ 		dev->objectBucket[bucket].count--;
+ 	}
+-
+ }
+ 
+ /*  FreeObject frees up a Object and puts it back on the free list */
+-static void yaffs_FreeObject(yaffs_Object * tn)
++static void yaffs_FreeObject(yaffs_Object *tn)
+ {
+-
+ 	yaffs_Device *dev = tn->myDev;
+ 
+-#ifdef  __KERNEL__
++#ifdef __KERNEL__
++	T(YAFFS_TRACE_OS, (TSTR("FreeObject %p inode %p"TENDSTR), tn, tn->myInode));
++#endif
++
++	if (tn->parent)
++		YBUG();
++	if (!ylist_empty(&tn->siblings))
++		YBUG();
++
++
++#ifdef __KERNEL__
+ 	if (tn->myInode) {
+ 		/* We're still hooked up to a cached inode.
+ 		 * Don't delete now, but mark for later deletion
+@@ -1963,24 +2000,28 @@ static void yaffs_FreeObject(yaffs_Objec
+ 
+ 	yaffs_UnhashObject(tn);
+ 
++#ifdef VALGRIND_TEST
++	YFREE(tn);
++#else
+ 	/* Link into the free list. */
+-	tn->siblings.next = (struct list_head *)(dev->freeObjects);
++	tn->siblings.next = (struct ylist_head *)(dev->freeObjects);
+ 	dev->freeObjects = tn;
+ 	dev->nFreeObjects++;
++#endif
++	dev->nCheckpointBlocksRequired = 0; /* force recalculation*/
+ }
+ 
+ #ifdef __KERNEL__
+ 
+-void yaffs_HandleDeferedFree(yaffs_Object * obj)
++void yaffs_HandleDeferedFree(yaffs_Object *obj)
+ {
+-	if (obj->deferedFree) {
++	if (obj->deferedFree)
+ 		yaffs_FreeObject(obj);
+-	}
+ }
+ 
+ #endif
+ 
+-static void yaffs_DeinitialiseObjects(yaffs_Device * dev)
++static void yaffs_DeinitialiseObjects(yaffs_Device *dev)
+ {
+ 	/* Free the list of allocated Objects */
+ 
+@@ -1998,7 +2039,7 @@ static void yaffs_DeinitialiseObjects(ya
+ 	dev->nFreeObjects = 0;
+ }
+ 
+-static void yaffs_InitialiseObjects(yaffs_Device * dev)
++static void yaffs_InitialiseObjects(yaffs_Device *dev)
+ {
+ 	int i;
+ 
+@@ -2007,15 +2048,14 @@ static void yaffs_InitialiseObjects(yaff
+ 	dev->nFreeObjects = 0;
+ 
+ 	for (i = 0; i < YAFFS_NOBJECT_BUCKETS; i++) {
+-		INIT_LIST_HEAD(&dev->objectBucket[i].list);
++		YINIT_LIST_HEAD(&dev->objectBucket[i].list);
+ 		dev->objectBucket[i].count = 0;
+ 	}
+-
+ }
+ 
+-static int yaffs_FindNiceObjectBucket(yaffs_Device * dev)
++static int yaffs_FindNiceObjectBucket(yaffs_Device *dev)
+ {
+-	static int x = 0;
++	static int x;
+ 	int i;
+ 	int l = 999;
+ 	int lowest = 999999;
+@@ -2049,7 +2089,7 @@ static int yaffs_FindNiceObjectBucket(ya
+ 	return l;
+ }
+ 
+-static int yaffs_CreateNewObjectNumber(yaffs_Device * dev)
++static int yaffs_CreateNewObjectNumber(yaffs_Device *dev)
+ {
+ 	int bucket = yaffs_FindNiceObjectBucket(dev);
+ 
+@@ -2058,7 +2098,7 @@ static int yaffs_CreateNewObjectNumber(y
+ 	 */
+ 
+ 	int found = 0;
+-	struct list_head *i;
++	struct ylist_head *i;
+ 
+ 	__u32 n = (__u32) bucket;
+ 
+@@ -2068,41 +2108,38 @@ static int yaffs_CreateNewObjectNumber(y
+ 		found = 1;
+ 		n += YAFFS_NOBJECT_BUCKETS;
+ 		if (1 || dev->objectBucket[bucket].count > 0) {
+-			list_for_each(i, &dev->objectBucket[bucket].list) {
++			ylist_for_each(i, &dev->objectBucket[bucket].list) {
+ 				/* If there is already one in the list */
+-				if (i
+-				    && list_entry(i, yaffs_Object,
+-						  hashLink)->objectId == n) {
++				if (i && ylist_entry(i, yaffs_Object,
++						hashLink)->objectId == n) {
+ 					found = 0;
+ 				}
+ 			}
+ 		}
+ 	}
+ 
+-
+ 	return n;
+ }
+ 
+-static void yaffs_HashObject(yaffs_Object * in)
++static void yaffs_HashObject(yaffs_Object *in)
+ {
+ 	int bucket = yaffs_HashFunction(in->objectId);
+ 	yaffs_Device *dev = in->myDev;
+ 
+-	list_add(&in->hashLink, &dev->objectBucket[bucket].list);
++	ylist_add(&in->hashLink, &dev->objectBucket[bucket].list);
+ 	dev->objectBucket[bucket].count++;
+-
+ }
+ 
+-yaffs_Object *yaffs_FindObjectByNumber(yaffs_Device * dev, __u32 number)
++yaffs_Object *yaffs_FindObjectByNumber(yaffs_Device *dev, __u32 number)
+ {
+ 	int bucket = yaffs_HashFunction(number);
+-	struct list_head *i;
++	struct ylist_head *i;
+ 	yaffs_Object *in;
+ 
+-	list_for_each(i, &dev->objectBucket[bucket].list) {
++	ylist_for_each(i, &dev->objectBucket[bucket].list) {
+ 		/* Look if it is in the list */
+ 		if (i) {
+-			in = list_entry(i, yaffs_Object, hashLink);
++			in = ylist_entry(i, yaffs_Object, hashLink);
+ 			if (in->objectId == number) {
+ #ifdef __KERNEL__
+ 				/* Don't tell the VFS about this one if it is defered free */
+@@ -2118,31 +2155,27 @@ yaffs_Object *yaffs_FindObjectByNumber(y
+ 	return NULL;
+ }
+ 
+-yaffs_Object *yaffs_CreateNewObject(yaffs_Device * dev, int number,
++yaffs_Object *yaffs_CreateNewObject(yaffs_Device *dev, int number,
+ 				    yaffs_ObjectType type)
+ {
+-
+ 	yaffs_Object *theObject;
+-	yaffs_Tnode *tn;
++	yaffs_Tnode *tn = NULL;
+ 
+-	if (number < 0) {
++	if (number < 0)
+ 		number = yaffs_CreateNewObjectNumber(dev);
+-	}
+ 
+ 	theObject = yaffs_AllocateEmptyObject(dev);
+-	if(!theObject)
++	if (!theObject)
+ 		return NULL;
+ 
+-	if(type == YAFFS_OBJECT_TYPE_FILE){
++	if (type == YAFFS_OBJECT_TYPE_FILE) {
+ 		tn = yaffs_GetTnode(dev);
+-		if(!tn){
++		if (!tn) {
+ 			yaffs_FreeObject(theObject);
+ 			return NULL;
+ 		}
+ 	}
+ 
+-
+-
+ 	if (theObject) {
+ 		theObject->fake = 0;
+ 		theObject->renameAllowed = 1;
+@@ -2171,8 +2204,8 @@ yaffs_Object *yaffs_CreateNewObject(yaff
+ 			theObject->variant.fileVariant.top = tn;
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_DIRECTORY:
+-			INIT_LIST_HEAD(&theObject->variant.directoryVariant.
+-				       children);
++			YINIT_LIST_HEAD(&theObject->variant.directoryVariant.
++					children);
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_SYMLINK:
+ 		case YAFFS_OBJECT_TYPE_HARDLINK:
+@@ -2188,32 +2221,30 @@ yaffs_Object *yaffs_CreateNewObject(yaff
+ 	return theObject;
+ }
+ 
+-static yaffs_Object *yaffs_FindOrCreateObjectByNumber(yaffs_Device * dev,
++static yaffs_Object *yaffs_FindOrCreateObjectByNumber(yaffs_Device *dev,
+ 						      int number,
+ 						      yaffs_ObjectType type)
+ {
+ 	yaffs_Object *theObject = NULL;
+ 
+-	if (number > 0) {
++	if (number > 0)
+ 		theObject = yaffs_FindObjectByNumber(dev, number);
+-	}
+ 
+-	if (!theObject) {
++	if (!theObject)
+ 		theObject = yaffs_CreateNewObject(dev, number, type);
+-	}
+ 
+ 	return theObject;
+ 
+ }
+ 
+ 
+-static YCHAR *yaffs_CloneString(const YCHAR * str)
++static YCHAR *yaffs_CloneString(const YCHAR *str)
+ {
+ 	YCHAR *newStr = NULL;
+ 
+ 	if (str && *str) {
+ 		newStr = YMALLOC((yaffs_strlen(str) + 1) * sizeof(YCHAR));
+-		if(newStr)
++		if (newStr)
+ 			yaffs_strcpy(newStr, str);
+ 	}
+ 
+@@ -2229,29 +2260,31 @@ static YCHAR *yaffs_CloneString(const YC
+  */
+ 
+ static yaffs_Object *yaffs_MknodObject(yaffs_ObjectType type,
+-				       yaffs_Object * parent,
+-				       const YCHAR * name,
++				       yaffs_Object *parent,
++				       const YCHAR *name,
+ 				       __u32 mode,
+ 				       __u32 uid,
+ 				       __u32 gid,
+-				       yaffs_Object * equivalentObject,
+-				       const YCHAR * aliasString, __u32 rdev)
++				       yaffs_Object *equivalentObject,
++				       const YCHAR *aliasString, __u32 rdev)
+ {
+ 	yaffs_Object *in;
+-	YCHAR *str;
++	YCHAR *str = NULL;
+ 
+ 	yaffs_Device *dev = parent->myDev;
+ 
+ 	/* Check if the entry exists. If it does then fail the call since we don't want a dup.*/
+-	if (yaffs_FindObjectByName(parent, name)) {
++	if (yaffs_FindObjectByName(parent, name))
+ 		return NULL;
+-	}
+ 
+ 	in = yaffs_CreateNewObject(dev, -1, type);
+ 
+-	if(type == YAFFS_OBJECT_TYPE_SYMLINK){
++	if (!in)
++		return YAFFS_FAIL;
++
++	if (type == YAFFS_OBJECT_TYPE_SYMLINK) {
+ 		str = yaffs_CloneString(aliasString);
+-		if(!str){
++		if (!str) {
+ 			yaffs_FreeObject(in);
+ 			return NULL;
+ 		}
+@@ -2260,7 +2293,7 @@ static yaffs_Object *yaffs_MknodObject(y
+ 
+ 
+ 	if (in) {
+-		in->chunkId = -1;
++		in->hdrChunk = 0;
+ 		in->valid = 1;
+ 		in->variantType = type;
+ 
+@@ -2293,10 +2326,10 @@ static yaffs_Object *yaffs_MknodObject(y
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_HARDLINK:
+ 			in->variant.hardLinkVariant.equivalentObject =
+-			    equivalentObject;
++				equivalentObject;
+ 			in->variant.hardLinkVariant.equivalentObjectId =
+-			    equivalentObject->objectId;
+-			list_add(&in->hardLinks, &equivalentObject->hardLinks);
++				equivalentObject->objectId;
++			ylist_add(&in->hardLinks, &equivalentObject->hardLinks);
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_FILE:
+ 		case YAFFS_OBJECT_TYPE_DIRECTORY:
+@@ -2308,7 +2341,7 @@ static yaffs_Object *yaffs_MknodObject(y
+ 
+ 		if (yaffs_UpdateObjectHeader(in, name, 0, 0, 0) < 0) {
+ 			/* Could not create the object header, fail the creation */
+-			yaffs_DestroyObject(in);
++			yaffs_DeleteObject(in);
+ 			in = NULL;
+ 		}
+ 
+@@ -2317,38 +2350,38 @@ static yaffs_Object *yaffs_MknodObject(y
+ 	return in;
+ }
+ 
+-yaffs_Object *yaffs_MknodFile(yaffs_Object * parent, const YCHAR * name,
+-			      __u32 mode, __u32 uid, __u32 gid)
++yaffs_Object *yaffs_MknodFile(yaffs_Object *parent, const YCHAR *name,
++			__u32 mode, __u32 uid, __u32 gid)
+ {
+ 	return yaffs_MknodObject(YAFFS_OBJECT_TYPE_FILE, parent, name, mode,
+-				 uid, gid, NULL, NULL, 0);
++				uid, gid, NULL, NULL, 0);
+ }
+ 
+-yaffs_Object *yaffs_MknodDirectory(yaffs_Object * parent, const YCHAR * name,
+-				   __u32 mode, __u32 uid, __u32 gid)
++yaffs_Object *yaffs_MknodDirectory(yaffs_Object *parent, const YCHAR *name,
++				__u32 mode, __u32 uid, __u32 gid)
+ {
+ 	return yaffs_MknodObject(YAFFS_OBJECT_TYPE_DIRECTORY, parent, name,
+ 				 mode, uid, gid, NULL, NULL, 0);
+ }
+ 
+-yaffs_Object *yaffs_MknodSpecial(yaffs_Object * parent, const YCHAR * name,
+-				 __u32 mode, __u32 uid, __u32 gid, __u32 rdev)
++yaffs_Object *yaffs_MknodSpecial(yaffs_Object *parent, const YCHAR *name,
++				__u32 mode, __u32 uid, __u32 gid, __u32 rdev)
+ {
+ 	return yaffs_MknodObject(YAFFS_OBJECT_TYPE_SPECIAL, parent, name, mode,
+ 				 uid, gid, NULL, NULL, rdev);
+ }
+ 
+-yaffs_Object *yaffs_MknodSymLink(yaffs_Object * parent, const YCHAR * name,
+-				 __u32 mode, __u32 uid, __u32 gid,
+-				 const YCHAR * alias)
++yaffs_Object *yaffs_MknodSymLink(yaffs_Object *parent, const YCHAR *name,
++				__u32 mode, __u32 uid, __u32 gid,
++				const YCHAR *alias)
+ {
+ 	return yaffs_MknodObject(YAFFS_OBJECT_TYPE_SYMLINK, parent, name, mode,
+-				 uid, gid, NULL, alias, 0);
++				uid, gid, NULL, alias, 0);
+ }
+ 
+ /* yaffs_Link returns the object id of the equivalent object.*/
+-yaffs_Object *yaffs_Link(yaffs_Object * parent, const YCHAR * name,
+-			 yaffs_Object * equivalentObject)
++yaffs_Object *yaffs_Link(yaffs_Object *parent, const YCHAR *name,
++			yaffs_Object *equivalentObject)
+ {
+ 	/* Get the real object in case we were fed a hard link as an equivalent object */
+ 	equivalentObject = yaffs_GetEquivalentObject(equivalentObject);
+@@ -2363,33 +2396,31 @@ yaffs_Object *yaffs_Link(yaffs_Object * 
+ 
+ }
+ 
+-static int yaffs_ChangeObjectName(yaffs_Object * obj, yaffs_Object * newDir,
+-				  const YCHAR * newName, int force, int shadows)
++static int yaffs_ChangeObjectName(yaffs_Object *obj, yaffs_Object *newDir,
++				const YCHAR *newName, int force, int shadows)
+ {
+ 	int unlinkOp;
+ 	int deleteOp;
+ 
+ 	yaffs_Object *existingTarget;
+ 
+-	if (newDir == NULL) {
++	if (newDir == NULL)
+ 		newDir = obj->parent;	/* use the old directory */
+-	}
+ 
+ 	if (newDir->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 		T(YAFFS_TRACE_ALWAYS,
+ 		  (TSTR
+-		   ("tragendy: yaffs_ChangeObjectName: newDir is not a directory"
++		   ("tragedy: yaffs_ChangeObjectName: newDir is not a directory"
+ 		    TENDSTR)));
+ 		YBUG();
+ 	}
+ 
+ 	/* TODO: Do we need this different handling for YAFFS2 and YAFFS1?? */
+-	if (obj->myDev->isYaffs2) {
++	if (obj->myDev->isYaffs2)
+ 		unlinkOp = (newDir == obj->myDev->unlinkedDir);
+-	} else {
++	else
+ 		unlinkOp = (newDir == obj->myDev->unlinkedDir
+ 			    && obj->variantType == YAFFS_OBJECT_TYPE_FILE);
+-	}
+ 
+ 	deleteOp = (newDir == obj->myDev->deletedDir);
+ 
+@@ -2415,40 +2446,40 @@ static int yaffs_ChangeObjectName(yaffs_
+ 			obj->unlinked = 1;
+ 
+ 		/* If it is a deletion then we mark it as a shrink for gc purposes. */
+-		if (yaffs_UpdateObjectHeader(obj, newName, 0, deleteOp, shadows)>= 0)
++		if (yaffs_UpdateObjectHeader(obj, newName, 0, deleteOp, shadows) >= 0)
+ 			return YAFFS_OK;
+ 	}
+ 
+ 	return YAFFS_FAIL;
+ }
+ 
+-int yaffs_RenameObject(yaffs_Object * oldDir, const YCHAR * oldName,
+-		       yaffs_Object * newDir, const YCHAR * newName)
++int yaffs_RenameObject(yaffs_Object *oldDir, const YCHAR *oldName,
++		yaffs_Object *newDir, const YCHAR *newName)
+ {
+-	yaffs_Object *obj;
+-	yaffs_Object *existingTarget;
++	yaffs_Object *obj = NULL;
++	yaffs_Object *existingTarget = NULL;
+ 	int force = 0;
+ 
++
++	if (!oldDir || oldDir->variantType != YAFFS_OBJECT_TYPE_DIRECTORY)
++		YBUG();
++	if (!newDir || newDir->variantType != YAFFS_OBJECT_TYPE_DIRECTORY)
++		YBUG();
++
+ #ifdef CONFIG_YAFFS_CASE_INSENSITIVE
+ 	/* Special case for case insemsitive systems (eg. WinCE).
+ 	 * While look-up is case insensitive, the name isn't.
+ 	 * Therefore we might want to change x.txt to X.txt
+ 	*/
+-	if (oldDir == newDir && yaffs_strcmp(oldName, newName) == 0) {
++	if (oldDir == newDir && yaffs_strcmp(oldName, newName) == 0)
+ 		force = 1;
+-	}
+ #endif
+ 
++	else if (yaffs_strlen(newName) > YAFFS_MAX_NAME_LENGTH)
++		/* ENAMETOOLONG */
++		return YAFFS_FAIL;
++
+ 	obj = yaffs_FindObjectByName(oldDir, oldName);
+-	/* Check new name to long. */
+-	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK &&
+-	    yaffs_strlen(newName) > YAFFS_MAX_ALIAS_LENGTH)
+-	  /* ENAMETOOLONG */
+-	  return YAFFS_FAIL;
+-	else if (obj->variantType != YAFFS_OBJECT_TYPE_SYMLINK &&
+-		 yaffs_strlen(newName) > YAFFS_MAX_NAME_LENGTH)
+-	  /* ENAMETOOLONG */
+-	  return YAFFS_FAIL;
+ 
+ 	if (obj && obj->renameAllowed) {
+ 
+@@ -2456,8 +2487,8 @@ int yaffs_RenameObject(yaffs_Object * ol
+ 
+ 		existingTarget = yaffs_FindObjectByName(newDir, newName);
+ 		if (existingTarget &&
+-		    existingTarget->variantType == YAFFS_OBJECT_TYPE_DIRECTORY &&
+-		    !list_empty(&existingTarget->variant.directoryVariant.children)) {
++			existingTarget->variantType == YAFFS_OBJECT_TYPE_DIRECTORY &&
++			!ylist_empty(&existingTarget->variant.directoryVariant.children)) {
+ 			/* There is a target that is a non-empty directory, so we fail */
+ 			return YAFFS_FAIL;	/* EEXIST or ENOTEMPTY */
+ 		} else if (existingTarget && existingTarget != obj) {
+@@ -2465,7 +2496,7 @@ int yaffs_RenameObject(yaffs_Object * ol
+ 			 * but only if it isn't the same object
+ 			 */
+ 			yaffs_ChangeObjectName(obj, newDir, newName, force,
+-					       existingTarget->objectId);
++						existingTarget->objectId);
+ 			yaffs_UnlinkObject(existingTarget);
+ 		}
+ 
+@@ -2476,7 +2507,7 @@ int yaffs_RenameObject(yaffs_Object * ol
+ 
+ /*------------------------- Block Management and Page Allocation ----------------*/
+ 
+-static int yaffs_InitialiseBlocks(yaffs_Device * dev)
++static int yaffs_InitialiseBlocks(yaffs_Device *dev)
+ {
+ 	int nBlocks = dev->internalEndBlock - dev->internalStartBlock + 1;
+ 
+@@ -2487,23 +2518,20 @@ static int yaffs_InitialiseBlocks(yaffs_
+ 
+ 	/* If the first allocation strategy fails, thry the alternate one */
+ 	dev->blockInfo = YMALLOC(nBlocks * sizeof(yaffs_BlockInfo));
+-	if(!dev->blockInfo){
++	if (!dev->blockInfo) {
+ 		dev->blockInfo = YMALLOC_ALT(nBlocks * sizeof(yaffs_BlockInfo));
+ 		dev->blockInfoAlt = 1;
+-	}
+-	else
++	} else
+ 		dev->blockInfoAlt = 0;
+ 
+-	if(dev->blockInfo){
+-
++	if (dev->blockInfo) {
+ 		/* Set up dynamic blockinfo stuff. */
+ 		dev->chunkBitmapStride = (dev->nChunksPerBlock + 7) / 8; /* round up bytes */
+ 		dev->chunkBits = YMALLOC(dev->chunkBitmapStride * nBlocks);
+-		if(!dev->chunkBits){
++		if (!dev->chunkBits) {
+ 			dev->chunkBits = YMALLOC_ALT(dev->chunkBitmapStride * nBlocks);
+ 			dev->chunkBitsAlt = 1;
+-		}
+-		else
++		} else
+ 			dev->chunkBitsAlt = 0;
+ 	}
+ 
+@@ -2514,30 +2542,29 @@ static int yaffs_InitialiseBlocks(yaffs_
+ 	}
+ 
+ 	return YAFFS_FAIL;
+-
+ }
+ 
+-static void yaffs_DeinitialiseBlocks(yaffs_Device * dev)
++static void yaffs_DeinitialiseBlocks(yaffs_Device *dev)
+ {
+-	if(dev->blockInfoAlt && dev->blockInfo)
++	if (dev->blockInfoAlt && dev->blockInfo)
+ 		YFREE_ALT(dev->blockInfo);
+-	else if(dev->blockInfo)
++	else if (dev->blockInfo)
+ 		YFREE(dev->blockInfo);
+ 
+ 	dev->blockInfoAlt = 0;
+ 
+ 	dev->blockInfo = NULL;
+ 
+-	if(dev->chunkBitsAlt && dev->chunkBits)
++	if (dev->chunkBitsAlt && dev->chunkBits)
+ 		YFREE_ALT(dev->chunkBits);
+-	else if(dev->chunkBits)
++	else if (dev->chunkBits)
+ 		YFREE(dev->chunkBits);
+ 	dev->chunkBitsAlt = 0;
+ 	dev->chunkBits = NULL;
+ }
+ 
+-static int yaffs_BlockNotDisqualifiedFromGC(yaffs_Device * dev,
+-					    yaffs_BlockInfo * bi)
++static int yaffs_BlockNotDisqualifiedFromGC(yaffs_Device *dev,
++					yaffs_BlockInfo *bi)
+ {
+ 	int i;
+ 	__u32 seq;
+@@ -2556,7 +2583,7 @@ static int yaffs_BlockNotDisqualifiedFro
+ 		seq = dev->sequenceNumber;
+ 
+ 		for (i = dev->internalStartBlock; i <= dev->internalEndBlock;
+-		     i++) {
++				i++) {
+ 			b = yaffs_GetBlockInfo(dev, i);
+ 			if (b->blockState == YAFFS_BLOCK_STATE_FULL &&
+ 			    (b->pagesInUse - b->softDeletions) <
+@@ -2571,38 +2598,36 @@ static int yaffs_BlockNotDisqualifiedFro
+ 	 * discarded pages.
+ 	 */
+ 	return (bi->sequenceNumber <= dev->oldestDirtySequence);
+-
+ }
+ 
+ /* FindDiretiestBlock is used to select the dirtiest block (or close enough)
+  * for garbage collection.
+  */
+ 
+-static int yaffs_FindBlockForGarbageCollection(yaffs_Device * dev,
+-					       int aggressive)
++static int yaffs_FindBlockForGarbageCollection(yaffs_Device *dev,
++					int aggressive)
+ {
+-
+ 	int b = dev->currentDirtyChecker;
+ 
+ 	int i;
+ 	int iterations;
+ 	int dirtiest = -1;
+ 	int pagesInUse = 0;
+-	int prioritised=0;
++	int prioritised = 0;
+ 	yaffs_BlockInfo *bi;
+ 	int pendingPrioritisedExist = 0;
+ 
+ 	/* First let's see if we need to grab a prioritised block */
+-	if(dev->hasPendingPrioritisedGCs){
+-		for(i = dev->internalStartBlock; i < dev->internalEndBlock && !prioritised; i++){
++	if (dev->hasPendingPrioritisedGCs) {
++		for (i = dev->internalStartBlock; i < dev->internalEndBlock && !prioritised; i++) {
+ 
+ 			bi = yaffs_GetBlockInfo(dev, i);
+-			//yaffs_VerifyBlock(dev,bi,i);
++			/* yaffs_VerifyBlock(dev,bi,i); */
+ 
+-			if(bi->gcPrioritise) {
++			if (bi->gcPrioritise) {
+ 				pendingPrioritisedExist = 1;
+-				if(bi->blockState == YAFFS_BLOCK_STATE_FULL &&
+-				   yaffs_BlockNotDisqualifiedFromGC(dev, bi)){
++				if (bi->blockState == YAFFS_BLOCK_STATE_FULL &&
++				   yaffs_BlockNotDisqualifiedFromGC(dev, bi)) {
+ 					pagesInUse = (bi->pagesInUse - bi->softDeletions);
+ 					dirtiest = i;
+ 					prioritised = 1;
+@@ -2611,7 +2636,7 @@ static int yaffs_FindBlockForGarbageColl
+ 			}
+ 		}
+ 
+-		if(!pendingPrioritisedExist) /* None found, so we can clear this */
++		if (!pendingPrioritisedExist) /* None found, so we can clear this */
+ 			dev->hasPendingPrioritisedGCs = 0;
+ 	}
+ 
+@@ -2623,31 +2648,28 @@ static int yaffs_FindBlockForGarbageColl
+ 
+ 	dev->nonAggressiveSkip--;
+ 
+-	if (!aggressive && (dev->nonAggressiveSkip > 0)) {
++	if (!aggressive && (dev->nonAggressiveSkip > 0))
+ 		return -1;
+-	}
+ 
+-	if(!prioritised)
++	if (!prioritised)
+ 		pagesInUse =
+-	    		(aggressive) ? dev->nChunksPerBlock : YAFFS_PASSIVE_GC_CHUNKS + 1;
++			(aggressive) ? dev->nChunksPerBlock : YAFFS_PASSIVE_GC_CHUNKS + 1;
+ 
+-	if (aggressive) {
++	if (aggressive)
+ 		iterations =
+ 		    dev->internalEndBlock - dev->internalStartBlock + 1;
+-	} else {
++	else {
+ 		iterations =
+ 		    dev->internalEndBlock - dev->internalStartBlock + 1;
+ 		iterations = iterations / 16;
+-		if (iterations > 200) {
++		if (iterations > 200)
+ 			iterations = 200;
+-		}
+ 	}
+ 
+ 	for (i = 0; i <= iterations && pagesInUse > 0 && !prioritised; i++) {
+ 		b++;
+-		if (b < dev->internalStartBlock || b > dev->internalEndBlock) {
++		if (b < dev->internalStartBlock || b > dev->internalEndBlock)
+ 			b = dev->internalStartBlock;
+-		}
+ 
+ 		if (b < dev->internalStartBlock || b > dev->internalEndBlock) {
+ 			T(YAFFS_TRACE_ERROR,
+@@ -2657,17 +2679,9 @@ static int yaffs_FindBlockForGarbageColl
+ 
+ 		bi = yaffs_GetBlockInfo(dev, b);
+ 
+-#if 0
+-		if (bi->blockState == YAFFS_BLOCK_STATE_CHECKPOINT) {
+-			dirtiest = b;
+-			pagesInUse = 0;
+-		}
+-		else
+-#endif
+-
+ 		if (bi->blockState == YAFFS_BLOCK_STATE_FULL &&
+-		       (bi->pagesInUse - bi->softDeletions) < pagesInUse &&
+-		        yaffs_BlockNotDisqualifiedFromGC(dev, bi)) {
++			(bi->pagesInUse - bi->softDeletions) < pagesInUse &&
++				yaffs_BlockNotDisqualifiedFromGC(dev, bi)) {
+ 			dirtiest = b;
+ 			pagesInUse = (bi->pagesInUse - bi->softDeletions);
+ 		}
+@@ -2678,19 +2692,18 @@ static int yaffs_FindBlockForGarbageColl
+ 	if (dirtiest > 0) {
+ 		T(YAFFS_TRACE_GC,
+ 		  (TSTR("GC Selected block %d with %d free, prioritised:%d" TENDSTR), dirtiest,
+-		   dev->nChunksPerBlock - pagesInUse,prioritised));
++		   dev->nChunksPerBlock - pagesInUse, prioritised));
+ 	}
+ 
+ 	dev->oldestDirtySequence = 0;
+ 
+-	if (dirtiest > 0) {
++	if (dirtiest > 0)
+ 		dev->nonAggressiveSkip = 4;
+-	}
+ 
+ 	return dirtiest;
+ }
+ 
+-static void yaffs_BlockBecameDirty(yaffs_Device * dev, int blockNo)
++static void yaffs_BlockBecameDirty(yaffs_Device *dev, int blockNo)
+ {
+ 	yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, blockNo);
+ 
+@@ -2752,7 +2765,7 @@ static void yaffs_BlockBecameDirty(yaffs
+ 	}
+ }
+ 
+-static int yaffs_FindBlockForAllocation(yaffs_Device * dev)
++static int yaffs_FindBlockForAllocation(yaffs_Device *dev)
+ {
+ 	int i;
+ 
+@@ -2763,7 +2776,7 @@ static int yaffs_FindBlockForAllocation(
+ 		 * Can't get space to gc
+ 		 */
+ 		T(YAFFS_TRACE_ERROR,
+-		  (TSTR("yaffs tragedy: no more eraased blocks" TENDSTR)));
++		  (TSTR("yaffs tragedy: no more erased blocks" TENDSTR)));
+ 
+ 		return -1;
+ 	}
+@@ -2794,31 +2807,74 @@ static int yaffs_FindBlockForAllocation(
+ 
+ 	T(YAFFS_TRACE_ALWAYS,
+ 	  (TSTR
+-	   ("yaffs tragedy: no more eraased blocks, but there should have been %d"
++	   ("yaffs tragedy: no more erased blocks, but there should have been %d"
+ 	    TENDSTR), dev->nErasedBlocks));
+ 
+ 	return -1;
+ }
+ 
+ 
+-// Check if there's space to allocate...
+-// Thinks.... do we need top make this ths same as yaffs_GetFreeChunks()?
+-static int yaffs_CheckSpaceForAllocation(yaffs_Device * dev)
++
++static int yaffs_CalcCheckpointBlocksRequired(yaffs_Device *dev)
++{
++	if (!dev->nCheckpointBlocksRequired &&
++	   dev->isYaffs2) {
++		/* Not a valid value so recalculate */
++		int nBytes = 0;
++		int nBlocks;
++		int devBlocks = (dev->endBlock - dev->startBlock + 1);
++		int tnodeSize;
++
++		tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
++
++		if (tnodeSize < sizeof(yaffs_Tnode))
++			tnodeSize = sizeof(yaffs_Tnode);
++
++		nBytes += sizeof(yaffs_CheckpointValidity);
++		nBytes += sizeof(yaffs_CheckpointDevice);
++		nBytes += devBlocks * sizeof(yaffs_BlockInfo);
++		nBytes += devBlocks * dev->chunkBitmapStride;
++		nBytes += (sizeof(yaffs_CheckpointObject) + sizeof(__u32)) * (dev->nObjectsCreated - dev->nFreeObjects);
++		nBytes += (tnodeSize + sizeof(__u32)) * (dev->nTnodesCreated - dev->nFreeTnodes);
++		nBytes += sizeof(yaffs_CheckpointValidity);
++		nBytes += sizeof(__u32); /* checksum*/
++
++		/* Round up and add 2 blocks to allow for some bad blocks, so add 3 */
++
++		nBlocks = (nBytes/(dev->nDataBytesPerChunk * dev->nChunksPerBlock)) + 3;
++
++		dev->nCheckpointBlocksRequired = nBlocks;
++	}
++
++	return dev->nCheckpointBlocksRequired;
++}
++
++/*
++ * Check if there's space to allocate...
++ * Thinks.... do we need top make this ths same as yaffs_GetFreeChunks()?
++ */
++static int yaffs_CheckSpaceForAllocation(yaffs_Device *dev)
+ {
+ 	int reservedChunks;
+ 	int reservedBlocks = dev->nReservedBlocks;
+ 	int checkpointBlocks;
+ 
+-	checkpointBlocks =  dev->nCheckpointReservedBlocks - dev->blocksInCheckpoint;
+-	if(checkpointBlocks < 0)
++	if (dev->isYaffs2) {
++		checkpointBlocks =  yaffs_CalcCheckpointBlocksRequired(dev) -
++				    dev->blocksInCheckpoint;
++		if (checkpointBlocks < 0)
++			checkpointBlocks = 0;
++	} else {
+ 		checkpointBlocks = 0;
++	}
+ 
+ 	reservedChunks = ((reservedBlocks + checkpointBlocks) * dev->nChunksPerBlock);
+ 
+ 	return (dev->nFreeChunks > reservedChunks);
+ }
+ 
+-static int yaffs_AllocateChunk(yaffs_Device * dev, int useReserve, yaffs_BlockInfo **blockUsedPtr)
++static int yaffs_AllocateChunk(yaffs_Device *dev, int useReserve,
++		yaffs_BlockInfo **blockUsedPtr)
+ {
+ 	int retVal;
+ 	yaffs_BlockInfo *bi;
+@@ -2835,7 +2891,7 @@ static int yaffs_AllocateChunk(yaffs_Dev
+ 	}
+ 
+ 	if (dev->nErasedBlocks < dev->nReservedBlocks
+-	    && dev->allocationPage == 0) {
++			&& dev->allocationPage == 0) {
+ 		T(YAFFS_TRACE_ALLOCATE, (TSTR("Allocating reserve" TENDSTR)));
+ 	}
+ 
+@@ -2844,10 +2900,10 @@ static int yaffs_AllocateChunk(yaffs_Dev
+ 		bi = yaffs_GetBlockInfo(dev, dev->allocationBlock);
+ 
+ 		retVal = (dev->allocationBlock * dev->nChunksPerBlock) +
+-		    dev->allocationPage;
++			dev->allocationPage;
+ 		bi->pagesInUse++;
+ 		yaffs_SetChunkBit(dev, dev->allocationBlock,
+-				  dev->allocationPage);
++				dev->allocationPage);
+ 
+ 		dev->allocationPage++;
+ 
+@@ -2859,43 +2915,43 @@ static int yaffs_AllocateChunk(yaffs_Dev
+ 			dev->allocationBlock = -1;
+ 		}
+ 
+-		if(blockUsedPtr)
++		if (blockUsedPtr)
+ 			*blockUsedPtr = bi;
+ 
+ 		return retVal;
+ 	}
+ 
+ 	T(YAFFS_TRACE_ERROR,
+-	  (TSTR("!!!!!!!!! Allocator out !!!!!!!!!!!!!!!!!" TENDSTR)));
++			(TSTR("!!!!!!!!! Allocator out !!!!!!!!!!!!!!!!!" TENDSTR)));
+ 
+ 	return -1;
+ }
+ 
+-static int yaffs_GetErasedChunks(yaffs_Device * dev)
++static int yaffs_GetErasedChunks(yaffs_Device *dev)
+ {
+ 	int n;
+ 
+ 	n = dev->nErasedBlocks * dev->nChunksPerBlock;
+ 
+-	if (dev->allocationBlock > 0) {
++	if (dev->allocationBlock > 0)
+ 		n += (dev->nChunksPerBlock - dev->allocationPage);
+-	}
+ 
+ 	return n;
+ 
+ }
+ 
+-static int yaffs_GarbageCollectBlock(yaffs_Device * dev, int block)
++static int yaffs_GarbageCollectBlock(yaffs_Device *dev, int block,
++		int wholeBlock)
+ {
+ 	int oldChunk;
+ 	int newChunk;
+-	int chunkInBlock;
+ 	int markNAND;
+ 	int retVal = YAFFS_OK;
+ 	int cleanups = 0;
+ 	int i;
+ 	int isCheckpointBlock;
+ 	int matchingChunk;
++	int maxCopies;
+ 
+ 	int chunksBefore = yaffs_GetErasedChunks(dev);
+ 	int chunksAfter;
+@@ -2911,8 +2967,11 @@ static int yaffs_GarbageCollectBlock(yaf
+ 	bi->blockState = YAFFS_BLOCK_STATE_COLLECTING;
+ 
+ 	T(YAFFS_TRACE_TRACING,
+-	  (TSTR("Collecting block %d, in use %d, shrink %d, " TENDSTR), block,
+-	   bi->pagesInUse, bi->hasShrinkHeader));
++			(TSTR("Collecting block %d, in use %d, shrink %d, wholeBlock %d" TENDSTR),
++			 block,
++			 bi->pagesInUse,
++			 bi->hasShrinkHeader,
++			 wholeBlock));
+ 
+ 	/*yaffs_VerifyFreeChunks(dev); */
+ 
+@@ -2926,26 +2985,33 @@ static int yaffs_GarbageCollectBlock(yaf
+ 	dev->isDoingGC = 1;
+ 
+ 	if (isCheckpointBlock ||
+-	    !yaffs_StillSomeChunkBits(dev, block)) {
++			!yaffs_StillSomeChunkBits(dev, block)) {
+ 		T(YAFFS_TRACE_TRACING,
+-		  (TSTR
+-		   ("Collecting block %d that has no chunks in use" TENDSTR),
+-		   block));
++				(TSTR
++				 ("Collecting block %d that has no chunks in use" TENDSTR),
++				 block));
+ 		yaffs_BlockBecameDirty(dev, block);
+ 	} else {
+ 
+ 		__u8 *buffer = yaffs_GetTempBuffer(dev, __LINE__);
+ 
+-		yaffs_VerifyBlock(dev,bi,block);
++		yaffs_VerifyBlock(dev, bi, block);
+ 
+-		for (chunkInBlock = 0, oldChunk = block * dev->nChunksPerBlock;
+-		     chunkInBlock < dev->nChunksPerBlock
+-		     && yaffs_StillSomeChunkBits(dev, block);
+-		     chunkInBlock++, oldChunk++) {
+-			if (yaffs_CheckChunkBit(dev, block, chunkInBlock)) {
++		maxCopies = (wholeBlock) ? dev->nChunksPerBlock : 10;
++		oldChunk = block * dev->nChunksPerBlock + dev->gcChunk;
++
++		for (/* init already done */;
++		     retVal == YAFFS_OK &&
++		     dev->gcChunk < dev->nChunksPerBlock &&
++		     (bi->blockState == YAFFS_BLOCK_STATE_COLLECTING) &&
++		     maxCopies > 0;
++		     dev->gcChunk++, oldChunk++) {
++			if (yaffs_CheckChunkBit(dev, block, dev->gcChunk)) {
+ 
+ 				/* This page is in use and might need to be copied off */
+ 
++				maxCopies--;
++
+ 				markNAND = 1;
+ 
+ 				yaffs_InitialiseTags(&tags);
+@@ -2959,22 +3025,22 @@ static int yaffs_GarbageCollectBlock(yaf
+ 
+ 				T(YAFFS_TRACE_GC_DETAIL,
+ 				  (TSTR
+-				   ("Collecting page %d, %d %d %d " TENDSTR),
+-				   chunkInBlock, tags.objectId, tags.chunkId,
++				   ("Collecting chunk in block %d, %d %d %d " TENDSTR),
++				   dev->gcChunk, tags.objectId, tags.chunkId,
+ 				   tags.byteCount));
+ 
+-				if(object && !yaffs_SkipVerification(dev)){
+-					if(tags.chunkId == 0)
+-						matchingChunk = object->chunkId;
+-					else if(object->softDeleted)
++				if (object && !yaffs_SkipVerification(dev)) {
++					if (tags.chunkId == 0)
++						matchingChunk = object->hdrChunk;
++					else if (object->softDeleted)
+ 						matchingChunk = oldChunk; /* Defeat the test */
+ 					else
+-						matchingChunk = yaffs_FindChunkInFile(object,tags.chunkId,NULL);
++						matchingChunk = yaffs_FindChunkInFile(object, tags.chunkId, NULL);
+ 
+-					if(oldChunk != matchingChunk)
++					if (oldChunk != matchingChunk)
+ 						T(YAFFS_TRACE_ERROR,
+ 						  (TSTR("gc: page in gc mismatch: %d %d %d %d"TENDSTR),
+-						  oldChunk,matchingChunk,tags.objectId, tags.chunkId));
++						  oldChunk, matchingChunk, tags.objectId, tags.chunkId));
+ 
+ 				}
+ 
+@@ -2986,9 +3052,11 @@ static int yaffs_GarbageCollectBlock(yaf
+ 					    tags.objectId, tags.chunkId, tags.byteCount));
+ 				}
+ 
+-				if (object && object->deleted
+-				    && tags.chunkId != 0) {
+-					/* Data chunk in a deleted file, throw it away
++				if (object &&
++				    object->deleted &&
++				    object->softDeleted &&
++				    tags.chunkId != 0) {
++					/* Data chunk in a soft deleted file, throw it away
+ 					 * It's a soft deleted data chunk,
+ 					 * No need to copy this, just forget about it and
+ 					 * fix up the object.
+@@ -3003,13 +3071,12 @@ static int yaffs_GarbageCollectBlock(yaf
+ 						cleanups++;
+ 					}
+ 					markNAND = 0;
+-				} else if (0
+-					   /* Todo object && object->deleted && object->nDataChunks == 0 */
+-					   ) {
++				} else if (0) {
++					/* Todo object && object->deleted && object->nDataChunks == 0 */
+ 					/* Deleted object header with no data chunks.
+ 					 * Can be discarded and the file deleted.
+ 					 */
+-					object->chunkId = 0;
++					object->hdrChunk = 0;
+ 					yaffs_FreeTnode(object->myDev,
+ 							object->variant.
+ 							fileVariant.top);
+@@ -3031,17 +3098,14 @@ static int yaffs_GarbageCollectBlock(yaf
+ 						 * We need to nuke the shrinkheader flags first
+ 						 * We no longer want the shrinkHeader flag since its work is done
+ 						 * and if it is left in place it will mess up scanning.
+-						 * Also, clear out any shadowing stuff
+ 						 */
+ 
+ 						yaffs_ObjectHeader *oh;
+ 						oh = (yaffs_ObjectHeader *)buffer;
+ 						oh->isShrink = 0;
+-						oh->shadowsObject = -1;
+-						tags.extraShadows = 0;
+ 						tags.extraIsShrinkHeader = 0;
+ 
+-						yaffs_VerifyObjectHeader(object,oh,&tags,1);
++						yaffs_VerifyObjectHeader(object, oh, &tags, 1);
+ 					}
+ 
+ 					newChunk =
+@@ -3055,7 +3119,7 @@ static int yaffs_GarbageCollectBlock(yaf
+ 
+ 						if (tags.chunkId == 0) {
+ 							/* It's a header */
+-							object->chunkId =  newChunk;
++							object->hdrChunk =  newChunk;
+ 							object->serial =   tags.serialNumber;
+ 						} else {
+ 							/* It's a data chunk */
+@@ -3067,7 +3131,8 @@ static int yaffs_GarbageCollectBlock(yaf
+ 					}
+ 				}
+ 
+-				yaffs_DeleteChunk(dev, oldChunk, markNAND, __LINE__);
++				if (retVal == YAFFS_OK)
++					yaffs_DeleteChunk(dev, oldChunk, markNAND, __LINE__);
+ 
+ 			}
+ 		}
+@@ -3098,18 +3163,25 @@ static int yaffs_GarbageCollectBlock(yaf
+ 
+ 	}
+ 
+-	yaffs_VerifyCollectedBlock(dev,bi,block);
++	yaffs_VerifyCollectedBlock(dev, bi, block);
+ 
+-	if (chunksBefore >= (chunksAfter = yaffs_GetErasedChunks(dev))) {
++	chunksAfter = yaffs_GetErasedChunks(dev);
++	if (chunksBefore >= chunksAfter) {
+ 		T(YAFFS_TRACE_GC,
+ 		  (TSTR
+ 		   ("gc did not increase free chunks before %d after %d"
+ 		    TENDSTR), chunksBefore, chunksAfter));
+ 	}
+ 
++	/* If the gc completed then clear the current gcBlock so that we find another. */
++	if (bi->blockState != YAFFS_BLOCK_STATE_COLLECTING) {
++		dev->gcBlock = -1;
++		dev->gcChunk = 0;
++	}
++
+ 	dev->isDoingGC = 0;
+ 
+-	return YAFFS_OK;
++	return retVal;
+ }
+ 
+ /* New garbage collector
+@@ -3121,7 +3193,7 @@ static int yaffs_GarbageCollectBlock(yaf
+  * The idea is to help clear out space in a more spread-out manner.
+  * Dunno if it really does anything useful.
+  */
+-static int yaffs_CheckGarbageCollection(yaffs_Device * dev)
++static int yaffs_CheckGarbageCollection(yaffs_Device *dev)
+ {
+ 	int block;
+ 	int aggressive;
+@@ -3142,8 +3214,8 @@ static int yaffs_CheckGarbageCollection(
+ 	do {
+ 		maxTries++;
+ 
+-		checkpointBlockAdjust = (dev->nCheckpointReservedBlocks - dev->blocksInCheckpoint);
+-		if(checkpointBlockAdjust < 0)
++		checkpointBlockAdjust = yaffs_CalcCheckpointBlocksRequired(dev) - dev->blocksInCheckpoint;
++		if (checkpointBlockAdjust < 0)
+ 			checkpointBlockAdjust = 0;
+ 
+ 		if (dev->nErasedBlocks < (dev->nReservedBlocks + checkpointBlockAdjust + 2)) {
+@@ -3154,20 +3226,24 @@ static int yaffs_CheckGarbageCollection(
+ 			aggressive = 0;
+ 		}
+ 
+-		block = yaffs_FindBlockForGarbageCollection(dev, aggressive);
++		if (dev->gcBlock <= 0) {
++			dev->gcBlock = yaffs_FindBlockForGarbageCollection(dev, aggressive);
++			dev->gcChunk = 0;
++		}
++
++		block = dev->gcBlock;
+ 
+ 		if (block > 0) {
+ 			dev->garbageCollections++;
+-			if (!aggressive) {
++			if (!aggressive)
+ 				dev->passiveGarbageCollections++;
+-			}
+ 
+ 			T(YAFFS_TRACE_GC,
+ 			  (TSTR
+ 			   ("yaffs: GC erasedBlocks %d aggressive %d" TENDSTR),
+ 			   dev->nErasedBlocks, aggressive));
+ 
+-			gcOk = yaffs_GarbageCollectBlock(dev, block);
++			gcOk = yaffs_GarbageCollectBlock(dev, block, aggressive);
+ 		}
+ 
+ 		if (dev->nErasedBlocks < (dev->nReservedBlocks) && block > 0) {
+@@ -3176,15 +3252,16 @@ static int yaffs_CheckGarbageCollection(
+ 			   ("yaffs: GC !!!no reclaim!!! erasedBlocks %d after try %d block %d"
+ 			    TENDSTR), dev->nErasedBlocks, maxTries, block));
+ 		}
+-	} while ((dev->nErasedBlocks < dev->nReservedBlocks) && (block > 0)
+-		 && (maxTries < 2));
++	} while ((dev->nErasedBlocks < dev->nReservedBlocks) &&
++		 (block > 0) &&
++		 (maxTries < 2));
+ 
+ 	return aggressive ? gcOk : YAFFS_OK;
+ }
+ 
+ /*-------------------------  TAGS --------------------------------*/
+ 
+-static int yaffs_TagsMatch(const yaffs_ExtendedTags * tags, int objectId,
++static int yaffs_TagsMatch(const yaffs_ExtendedTags *tags, int objectId,
+ 			   int chunkInObject)
+ {
+ 	return (tags->chunkId == chunkInObject &&
+@@ -3195,8 +3272,8 @@ static int yaffs_TagsMatch(const yaffs_E
+ 
+ /*-------------------- Data file manipulation -----------------*/
+ 
+-static int yaffs_FindChunkInFile(yaffs_Object * in, int chunkInInode,
+-				 yaffs_ExtendedTags * tags)
++static int yaffs_FindChunkInFile(yaffs_Object *in, int chunkInInode,
++				 yaffs_ExtendedTags *tags)
+ {
+ 	/*Get the Tnode, then get the level 0 offset chunk offset */
+ 	yaffs_Tnode *tn;
+@@ -3214,7 +3291,7 @@ static int yaffs_FindChunkInFile(yaffs_O
+ 	tn = yaffs_FindLevel0Tnode(dev, &in->variant.fileVariant, chunkInInode);
+ 
+ 	if (tn) {
+-		theChunk = yaffs_GetChunkGroupBase(dev,tn,chunkInInode);
++		theChunk = yaffs_GetChunkGroupBase(dev, tn, chunkInInode);
+ 
+ 		retVal =
+ 		    yaffs_FindChunkInGroup(dev, theChunk, tags, in->objectId,
+@@ -3223,8 +3300,8 @@ static int yaffs_FindChunkInFile(yaffs_O
+ 	return retVal;
+ }
+ 
+-static int yaffs_FindAndDeleteChunkInFile(yaffs_Object * in, int chunkInInode,
+-					  yaffs_ExtendedTags * tags)
++static int yaffs_FindAndDeleteChunkInFile(yaffs_Object *in, int chunkInInode,
++					  yaffs_ExtendedTags *tags)
+ {
+ 	/* Get the Tnode, then get the level 0 offset chunk offset */
+ 	yaffs_Tnode *tn;
+@@ -3243,29 +3320,23 @@ static int yaffs_FindAndDeleteChunkInFil
+ 
+ 	if (tn) {
+ 
+-		theChunk = yaffs_GetChunkGroupBase(dev,tn,chunkInInode);
++		theChunk = yaffs_GetChunkGroupBase(dev, tn, chunkInInode);
+ 
+ 		retVal =
+ 		    yaffs_FindChunkInGroup(dev, theChunk, tags, in->objectId,
+ 					   chunkInInode);
+ 
+ 		/* Delete the entry in the filestructure (if found) */
+-		if (retVal != -1) {
+-			yaffs_PutLevel0Tnode(dev,tn,chunkInInode,0);
+-		}
+-	} else {
+-		/*T(("No level 0 found for %d\n", chunkInInode)); */
++		if (retVal != -1)
++			yaffs_PutLevel0Tnode(dev, tn, chunkInInode, 0);
+ 	}
+ 
+-	if (retVal == -1) {
+-		/* T(("Could not find %d to delete\n",chunkInInode)); */
+-	}
+ 	return retVal;
+ }
+ 
+ #ifdef YAFFS_PARANOID
+ 
+-static int yaffs_CheckFileSanity(yaffs_Object * in)
++static int yaffs_CheckFileSanity(yaffs_Object *in)
+ {
+ 	int chunk;
+ 	int nChunks;
+@@ -3278,10 +3349,8 @@ static int yaffs_CheckFileSanity(yaffs_O
+ 	int theChunk;
+ 	int chunkDeleted;
+ 
+-	if (in->variantType != YAFFS_OBJECT_TYPE_FILE) {
+-		/* T(("Object not a file\n")); */
++	if (in->variantType != YAFFS_OBJECT_TYPE_FILE)
+ 		return YAFFS_FAIL;
+-	}
+ 
+ 	objId = in->objectId;
+ 	fSize = in->variant.fileVariant.fileSize;
+@@ -3294,7 +3363,7 @@ static int yaffs_CheckFileSanity(yaffs_O
+ 
+ 		if (tn) {
+ 
+-			theChunk = yaffs_GetChunkGroupBase(dev,tn,chunk);
++			theChunk = yaffs_GetChunkGroupBase(dev, tn, chunk);
+ 
+ 			if (yaffs_CheckChunkBits
+ 			    (dev, theChunk / dev->nChunksPerBlock,
+@@ -3323,7 +3392,7 @@ static int yaffs_CheckFileSanity(yaffs_O
+ 
+ #endif
+ 
+-static int yaffs_PutChunkIntoFile(yaffs_Object * in, int chunkInInode,
++static int yaffs_PutChunkIntoFile(yaffs_Object *in, int chunkInInode,
+ 				  int chunkInNAND, int inScan)
+ {
+ 	/* NB inScan is zero unless scanning.
+@@ -3358,11 +3427,10 @@ static int yaffs_PutChunkIntoFile(yaffs_
+ 					&in->variant.fileVariant,
+ 					chunkInInode,
+ 					NULL);
+-	if (!tn) {
++	if (!tn)
+ 		return YAFFS_FAIL;
+-	}
+ 
+-	existingChunk = yaffs_GetChunkGroupBase(dev,tn,chunkInInode);
++	existingChunk = yaffs_GetChunkGroupBase(dev, tn, chunkInInode);
+ 
+ 	if (inScan != 0) {
+ 		/* If we're scanning then we need to test for duplicates
+@@ -3374,7 +3442,7 @@ static int yaffs_PutChunkIntoFile(yaffs_
+ 		 * Update: For backward scanning we don't need to re-read tags so this is quite cheap.
+ 		 */
+ 
+-		if (existingChunk != 0) {
++		if (existingChunk > 0) {
+ 			/* NB Right now existing chunk will not be real chunkId if the device >= 32MB
+ 			 *    thus we have to do a FindChunkInFile to get the real chunk id.
+ 			 *
+@@ -3411,8 +3479,10 @@ static int yaffs_PutChunkIntoFile(yaffs_
+ 			 * not be loaded during a scan
+ 			 */
+ 
+-			newSerial = newTags.serialNumber;
+-			existingSerial = existingTags.serialNumber;
++			if (inScan > 0) {
++				newSerial = newTags.serialNumber;
++				existingSerial = existingTags.serialNumber;
++			}
+ 
+ 			if ((inScan > 0) &&
+ 			    (in->myDev->isYaffs2 ||
+@@ -3437,24 +3507,23 @@ static int yaffs_PutChunkIntoFile(yaffs_
+ 
+ 	}
+ 
+-	if (existingChunk == 0) {
++	if (existingChunk == 0)
+ 		in->nDataChunks++;
+-	}
+ 
+-	yaffs_PutLevel0Tnode(dev,tn,chunkInInode,chunkInNAND);
++	yaffs_PutLevel0Tnode(dev, tn, chunkInInode, chunkInNAND);
+ 
+ 	return YAFFS_OK;
+ }
+ 
+-static int yaffs_ReadChunkDataFromObject(yaffs_Object * in, int chunkInInode,
+-					 __u8 * buffer)
++static int yaffs_ReadChunkDataFromObject(yaffs_Object *in, int chunkInInode,
++					__u8 *buffer)
+ {
+ 	int chunkInNAND = yaffs_FindChunkInFile(in, chunkInInode, NULL);
+ 
+-	if (chunkInNAND >= 0) {
++	if (chunkInNAND >= 0)
+ 		return yaffs_ReadChunkWithTagsFromNAND(in->myDev, chunkInNAND,
+-						       buffer,NULL);
+-	} else {
++						buffer, NULL);
++	else {
+ 		T(YAFFS_TRACE_NANDACCESS,
+ 		  (TSTR("Chunk %d not found zero instead" TENDSTR),
+ 		   chunkInNAND));
+@@ -3465,7 +3534,7 @@ static int yaffs_ReadChunkDataFromObject
+ 
+ }
+ 
+-void yaffs_DeleteChunk(yaffs_Device * dev, int chunkId, int markNAND, int lyn)
++void yaffs_DeleteChunk(yaffs_Device *dev, int chunkId, int markNAND, int lyn)
+ {
+ 	int block;
+ 	int page;
+@@ -3475,16 +3544,15 @@ void yaffs_DeleteChunk(yaffs_Device * de
+ 	if (chunkId <= 0)
+ 		return;
+ 
+-
+ 	dev->nDeletions++;
+ 	block = chunkId / dev->nChunksPerBlock;
+ 	page = chunkId % dev->nChunksPerBlock;
+ 
+ 
+-	if(!yaffs_CheckChunkBit(dev,block,page))
++	if (!yaffs_CheckChunkBit(dev, block, page))
+ 		T(YAFFS_TRACE_VERIFY,
+-		 	(TSTR("Deleting invalid chunk %d"TENDSTR),
+-		 	 chunkId));
++			(TSTR("Deleting invalid chunk %d"TENDSTR),
++			 chunkId));
+ 
+ 	bi = yaffs_GetBlockInfo(dev, block);
+ 
+@@ -3524,14 +3592,12 @@ void yaffs_DeleteChunk(yaffs_Device * de
+ 			yaffs_BlockBecameDirty(dev, block);
+ 		}
+ 
+-	} else {
+-		/* T(("Bad news deleting chunk %d\n",chunkId)); */
+ 	}
+ 
+ }
+ 
+-static int yaffs_WriteChunkDataToObject(yaffs_Object * in, int chunkInInode,
+-					const __u8 * buffer, int nBytes,
++static int yaffs_WriteChunkDataToObject(yaffs_Object *in, int chunkInInode,
++					const __u8 *buffer, int nBytes,
+ 					int useReserve)
+ {
+ 	/* Find old chunk Need to do this to get serial number
+@@ -3561,6 +3627,12 @@ static int yaffs_WriteChunkDataToObject(
+ 	    (prevChunkId >= 0) ? prevTags.serialNumber + 1 : 1;
+ 	newTags.byteCount = nBytes;
+ 
++	if (nBytes < 1 || nBytes > dev->totalBytesPerChunk) {
++		T(YAFFS_TRACE_ERROR,
++		(TSTR("Writing %d bytes to chunk!!!!!!!!!" TENDSTR), nBytes));
++		YBUG();
++	}
++
+ 	newChunkId =
+ 	    yaffs_WriteNewChunkWithTagsToNAND(dev, buffer, &newTags,
+ 					      useReserve);
+@@ -3568,11 +3640,9 @@ static int yaffs_WriteChunkDataToObject(
+ 	if (newChunkId >= 0) {
+ 		yaffs_PutChunkIntoFile(in, chunkInInode, newChunkId, 0);
+ 
+-		if (prevChunkId >= 0) {
++		if (prevChunkId >= 0)
+ 			yaffs_DeleteChunk(dev, prevChunkId, 1, __LINE__);
+ 
+-		}
+-
+ 		yaffs_CheckFileSanity(in);
+ 	}
+ 	return newChunkId;
+@@ -3582,7 +3652,7 @@ static int yaffs_WriteChunkDataToObject(
+ /* UpdateObjectHeader updates the header on NAND for an object.
+  * If name is not NULL, then that new name is used.
+  */
+-int yaffs_UpdateObjectHeader(yaffs_Object * in, const YCHAR * name, int force,
++int yaffs_UpdateObjectHeader(yaffs_Object *in, const YCHAR *name, int force,
+ 			     int isShrink, int shadows)
+ {
+ 
+@@ -3603,9 +3673,12 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 
+ 	yaffs_ObjectHeader *oh = NULL;
+ 
+-	yaffs_strcpy(oldName,"silly old name");
++	yaffs_strcpy(oldName, _Y("silly old name"));
+ 
+-	if (!in->fake || force) {
++
++	if (!in->fake ||
++		in == dev->rootDir || /* The rootDir should also be saved */
++		force) {
+ 
+ 		yaffs_CheckGarbageCollection(dev);
+ 		yaffs_CheckObjectDetailsLoaded(in);
+@@ -3613,13 +3686,13 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 		buffer = yaffs_GetTempBuffer(in->myDev, __LINE__);
+ 		oh = (yaffs_ObjectHeader *) buffer;
+ 
+-		prevChunkId = in->chunkId;
++		prevChunkId = in->hdrChunk;
+ 
+-		if (prevChunkId >= 0) {
++		if (prevChunkId > 0) {
+ 			result = yaffs_ReadChunkWithTagsFromNAND(dev, prevChunkId,
+ 							buffer, &oldTags);
+ 
+-			yaffs_VerifyObjectHeader(in,oh,&oldTags,0);
++			yaffs_VerifyObjectHeader(in, oh, &oldTags, 0);
+ 
+ 			memcpy(oldName, oh->name, sizeof(oh->name));
+ 		}
+@@ -3628,7 +3701,7 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 
+ 		oh->type = in->variantType;
+ 		oh->yst_mode = in->yst_mode;
+-		oh->shadowsObject = shadows;
++		oh->shadowsObject = oh->inbandShadowsObject = shadows;
+ 
+ #ifdef CONFIG_YAFFS_WINCE
+ 		oh->win_atime[0] = in->win_atime[0];
+@@ -3645,20 +3718,18 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 		oh->yst_ctime = in->yst_ctime;
+ 		oh->yst_rdev = in->yst_rdev;
+ #endif
+-		if (in->parent) {
++		if (in->parent)
+ 			oh->parentObjectId = in->parent->objectId;
+-		} else {
++		else
+ 			oh->parentObjectId = 0;
+-		}
+ 
+ 		if (name && *name) {
+ 			memset(oh->name, 0, sizeof(oh->name));
+ 			yaffs_strncpy(oh->name, name, YAFFS_MAX_NAME_LENGTH);
+-		} else if (prevChunkId>=0) {
++		} else if (prevChunkId >= 0)
+ 			memcpy(oh->name, oldName, sizeof(oh->name));
+-		} else {
++		else
+ 			memset(oh->name, 0, sizeof(oh->name));
+-		}
+ 
+ 		oh->isShrink = isShrink;
+ 
+@@ -3708,7 +3779,7 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 		newTags.extraShadows = (oh->shadowsObject > 0) ? 1 : 0;
+ 		newTags.extraObjectType = in->variantType;
+ 
+-		yaffs_VerifyObjectHeader(in,oh,&newTags,1);
++		yaffs_VerifyObjectHeader(in, oh, &newTags, 1);
+ 
+ 		/* Create new chunk in NAND */
+ 		newChunkId =
+@@ -3717,20 +3788,20 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 
+ 		if (newChunkId >= 0) {
+ 
+-			in->chunkId = newChunkId;
++			in->hdrChunk = newChunkId;
+ 
+ 			if (prevChunkId >= 0) {
+ 				yaffs_DeleteChunk(dev, prevChunkId, 1,
+ 						  __LINE__);
+ 			}
+ 
+-			if(!yaffs_ObjectHasCachedWriteData(in))
++			if (!yaffs_ObjectHasCachedWriteData(in))
+ 				in->dirty = 0;
+ 
+ 			/* If this was a shrink, then mark the block that the chunk lives on */
+ 			if (isShrink) {
+ 				bi = yaffs_GetBlockInfo(in->myDev,
+-							newChunkId /in->myDev->	nChunksPerBlock);
++					newChunkId / in->myDev->nChunksPerBlock);
+ 				bi->hasShrinkHeader = 1;
+ 			}
+ 
+@@ -3766,7 +3837,7 @@ static int yaffs_ObjectHasCachedWriteDat
+ 	yaffs_ChunkCache *cache;
+ 	int nCaches = obj->myDev->nShortOpCaches;
+ 
+-	for(i = 0; i < nCaches; i++){
++	for (i = 0; i < nCaches; i++) {
+ 		cache = &dev->srCache[i];
+ 		if (cache->object == obj &&
+ 		    cache->dirty)
+@@ -3777,7 +3848,7 @@ static int yaffs_ObjectHasCachedWriteDat
+ }
+ 
+ 
+-static void yaffs_FlushFilesChunkCache(yaffs_Object * obj)
++static void yaffs_FlushFilesChunkCache(yaffs_Object *obj)
+ {
+ 	yaffs_Device *dev = obj->myDev;
+ 	int lowest = -99;	/* Stop compiler whining. */
+@@ -3844,16 +3915,16 @@ void yaffs_FlushEntireDeviceCache(yaffs_
+ 	 */
+ 	do {
+ 		obj = NULL;
+-		for( i = 0; i < nCaches && !obj; i++) {
++		for (i = 0; i < nCaches && !obj; i++) {
+ 			if (dev->srCache[i].object &&
+ 			    dev->srCache[i].dirty)
+ 				obj = dev->srCache[i].object;
+ 
+ 		}
+-		if(obj)
++		if (obj)
+ 			yaffs_FlushFilesChunkCache(obj);
+ 
+-	} while(obj);
++	} while (obj);
+ 
+ }
+ 
+@@ -3863,41 +3934,21 @@ void yaffs_FlushEntireDeviceCache(yaffs_
+  * Then look for the least recently used non-dirty one.
+  * Then look for the least recently used dirty one...., flush and look again.
+  */
+-static yaffs_ChunkCache *yaffs_GrabChunkCacheWorker(yaffs_Device * dev)
++static yaffs_ChunkCache *yaffs_GrabChunkCacheWorker(yaffs_Device *dev)
+ {
+ 	int i;
+-	int usage;
+-	int theOne;
+ 
+ 	if (dev->nShortOpCaches > 0) {
+ 		for (i = 0; i < dev->nShortOpCaches; i++) {
+ 			if (!dev->srCache[i].object)
+ 				return &dev->srCache[i];
+ 		}
++	}
+ 
+-		return NULL;
++	return NULL;
++}
+ 
+-		theOne = -1;
+-		usage = 0;	/* just to stop the compiler grizzling */
+-
+-		for (i = 0; i < dev->nShortOpCaches; i++) {
+-			if (!dev->srCache[i].dirty &&
+-			    ((dev->srCache[i].lastUse < usage && theOne >= 0) ||
+-			     theOne < 0)) {
+-				usage = dev->srCache[i].lastUse;
+-				theOne = i;
+-			}
+-		}
+-
+-
+-		return theOne >= 0 ? &dev->srCache[theOne] : NULL;
+-	} else {
+-		return NULL;
+-	}
+-
+-}
+-
+-static yaffs_ChunkCache *yaffs_GrabChunkCache(yaffs_Device * dev)
++static yaffs_ChunkCache *yaffs_GrabChunkCache(yaffs_Device *dev)
+ {
+ 	yaffs_ChunkCache *cache;
+ 	yaffs_Object *theObj;
+@@ -3927,8 +3978,7 @@ static yaffs_ChunkCache *yaffs_GrabChunk
+ 			for (i = 0; i < dev->nShortOpCaches; i++) {
+ 				if (dev->srCache[i].object &&
+ 				    !dev->srCache[i].locked &&
+-				    (dev->srCache[i].lastUse < usage || !cache))
+-				{
++				    (dev->srCache[i].lastUse < usage || !cache)) {
+ 					usage = dev->srCache[i].lastUse;
+ 					theObj = dev->srCache[i].object;
+ 					cache = &dev->srCache[i];
+@@ -3950,7 +4000,7 @@ static yaffs_ChunkCache *yaffs_GrabChunk
+ }
+ 
+ /* Find a cached chunk */
+-static yaffs_ChunkCache *yaffs_FindChunkCache(const yaffs_Object * obj,
++static yaffs_ChunkCache *yaffs_FindChunkCache(const yaffs_Object *obj,
+ 					      int chunkId)
+ {
+ 	yaffs_Device *dev = obj->myDev;
+@@ -3969,7 +4019,7 @@ static yaffs_ChunkCache *yaffs_FindChunk
+ }
+ 
+ /* Mark the chunk for the least recently used algorithym */
+-static void yaffs_UseChunkCache(yaffs_Device * dev, yaffs_ChunkCache * cache,
++static void yaffs_UseChunkCache(yaffs_Device *dev, yaffs_ChunkCache *cache,
+ 				int isAWrite)
+ {
+ 
+@@ -3977,9 +4027,9 @@ static void yaffs_UseChunkCache(yaffs_De
+ 		if (dev->srLastUse < 0 || dev->srLastUse > 100000000) {
+ 			/* Reset the cache usages */
+ 			int i;
+-			for (i = 1; i < dev->nShortOpCaches; i++) {
++			for (i = 1; i < dev->nShortOpCaches; i++)
+ 				dev->srCache[i].lastUse = 0;
+-			}
++
+ 			dev->srLastUse = 0;
+ 		}
+ 
+@@ -3987,9 +4037,8 @@ static void yaffs_UseChunkCache(yaffs_De
+ 
+ 		cache->lastUse = dev->srLastUse;
+ 
+-		if (isAWrite) {
++		if (isAWrite)
+ 			cache->dirty = 1;
+-		}
+ 	}
+ }
+ 
+@@ -3997,21 +4046,20 @@ static void yaffs_UseChunkCache(yaffs_De
+  * Do this when a whole page gets written,
+  * ie the short cache for this page is no longer valid.
+  */
+-static void yaffs_InvalidateChunkCache(yaffs_Object * object, int chunkId)
++static void yaffs_InvalidateChunkCache(yaffs_Object *object, int chunkId)
+ {
+ 	if (object->myDev->nShortOpCaches > 0) {
+ 		yaffs_ChunkCache *cache = yaffs_FindChunkCache(object, chunkId);
+ 
+-		if (cache) {
++		if (cache)
+ 			cache->object = NULL;
+-		}
+ 	}
+ }
+ 
+ /* Invalidate all the cache pages associated with this object
+  * Do this whenever ther file is deleted or resized.
+  */
+-static void yaffs_InvalidateWholeChunkCache(yaffs_Object * in)
++static void yaffs_InvalidateWholeChunkCache(yaffs_Object *in)
+ {
+ 	int i;
+ 	yaffs_Device *dev = in->myDev;
+@@ -4019,9 +4067,8 @@ static void yaffs_InvalidateWholeChunkCa
+ 	if (dev->nShortOpCaches > 0) {
+ 		/* Invalidate it. */
+ 		for (i = 0; i < dev->nShortOpCaches; i++) {
+-			if (dev->srCache[i].object == in) {
++			if (dev->srCache[i].object == in)
+ 				dev->srCache[i].object = NULL;
+-			}
+ 		}
+ 	}
+ }
+@@ -4029,18 +4076,18 @@ static void yaffs_InvalidateWholeChunkCa
+ /*--------------------- Checkpointing --------------------*/
+ 
+ 
+-static int yaffs_WriteCheckpointValidityMarker(yaffs_Device *dev,int head)
++static int yaffs_WriteCheckpointValidityMarker(yaffs_Device *dev, int head)
+ {
+ 	yaffs_CheckpointValidity cp;
+ 
+-	memset(&cp,0,sizeof(cp));
++	memset(&cp, 0, sizeof(cp));
+ 
+ 	cp.structType = sizeof(cp);
+ 	cp.magic = YAFFS_MAGIC;
+ 	cp.version = YAFFS_CHECKPOINT_VERSION;
+ 	cp.head = (head) ? 1 : 0;
+ 
+-	return (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp))?
++	return (yaffs_CheckpointWrite(dev, &cp, sizeof(cp)) == sizeof(cp)) ?
+ 		1 : 0;
+ }
+ 
+@@ -4049,9 +4096,9 @@ static int yaffs_ReadCheckpointValidityM
+ 	yaffs_CheckpointValidity cp;
+ 	int ok;
+ 
+-	ok = (yaffs_CheckpointRead(dev,&cp,sizeof(cp)) == sizeof(cp));
++	ok = (yaffs_CheckpointRead(dev, &cp, sizeof(cp)) == sizeof(cp));
+ 
+-	if(ok)
++	if (ok)
+ 		ok = (cp.structType == sizeof(cp)) &&
+ 		     (cp.magic == YAFFS_MAGIC) &&
+ 		     (cp.version == YAFFS_CHECKPOINT_VERSION) &&
+@@ -4100,21 +4147,21 @@ static int yaffs_WriteCheckpointDevice(y
+ 	int ok;
+ 
+ 	/* Write device runtime values*/
+-	yaffs_DeviceToCheckpointDevice(&cp,dev);
++	yaffs_DeviceToCheckpointDevice(&cp, dev);
+ 	cp.structType = sizeof(cp);
+ 
+-	ok = (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp));
++	ok = (yaffs_CheckpointWrite(dev, &cp, sizeof(cp)) == sizeof(cp));
+ 
+ 	/* Write block info */
+-	if(ok) {
++	if (ok) {
+ 		nBytes = nBlocks * sizeof(yaffs_BlockInfo);
+-		ok = (yaffs_CheckpointWrite(dev,dev->blockInfo,nBytes) == nBytes);
++		ok = (yaffs_CheckpointWrite(dev, dev->blockInfo, nBytes) == nBytes);
+ 	}
+ 
+ 	/* Write chunk bits */
+-	if(ok) {
++	if (ok) {
+ 		nBytes = nBlocks * dev->chunkBitmapStride;
+-		ok = (yaffs_CheckpointWrite(dev,dev->chunkBits,nBytes) == nBytes);
++		ok = (yaffs_CheckpointWrite(dev, dev->chunkBits, nBytes) == nBytes);
+ 	}
+ 	return	 ok ? 1 : 0;
+ 
+@@ -4128,25 +4175,25 @@ static int yaffs_ReadCheckpointDevice(ya
+ 
+ 	int ok;
+ 
+-	ok = (yaffs_CheckpointRead(dev,&cp,sizeof(cp)) == sizeof(cp));
+-	if(!ok)
++	ok = (yaffs_CheckpointRead(dev, &cp, sizeof(cp)) == sizeof(cp));
++	if (!ok)
+ 		return 0;
+ 
+-	if(cp.structType != sizeof(cp))
++	if (cp.structType != sizeof(cp))
+ 		return 0;
+ 
+ 
+-	yaffs_CheckpointDeviceToDevice(dev,&cp);
++	yaffs_CheckpointDeviceToDevice(dev, &cp);
+ 
+ 	nBytes = nBlocks * sizeof(yaffs_BlockInfo);
+ 
+-	ok = (yaffs_CheckpointRead(dev,dev->blockInfo,nBytes) == nBytes);
++	ok = (yaffs_CheckpointRead(dev, dev->blockInfo, nBytes) == nBytes);
+ 
+-	if(!ok)
++	if (!ok)
+ 		return 0;
+ 	nBytes = nBlocks * dev->chunkBitmapStride;
+ 
+-	ok = (yaffs_CheckpointRead(dev,dev->chunkBits,nBytes) == nBytes);
++	ok = (yaffs_CheckpointRead(dev, dev->chunkBits, nBytes) == nBytes);
+ 
+ 	return ok ? 1 : 0;
+ }
+@@ -4157,7 +4204,7 @@ static void yaffs_ObjectToCheckpointObje
+ 
+ 	cp->objectId = obj->objectId;
+ 	cp->parentId = (obj->parent) ? obj->parent->objectId : 0;
+-	cp->chunkId = obj->chunkId;
++	cp->hdrChunk = obj->hdrChunk;
+ 	cp->variantType = obj->variantType;
+ 	cp->deleted = obj->deleted;
+ 	cp->softDeleted = obj->softDeleted;
+@@ -4168,20 +4215,28 @@ static void yaffs_ObjectToCheckpointObje
+ 	cp->serial = obj->serial;
+ 	cp->nDataChunks = obj->nDataChunks;
+ 
+-	if(obj->variantType == YAFFS_OBJECT_TYPE_FILE)
++	if (obj->variantType == YAFFS_OBJECT_TYPE_FILE)
+ 		cp->fileSizeOrEquivalentObjectId = obj->variant.fileVariant.fileSize;
+-	else if(obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK)
++	else if (obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK)
+ 		cp->fileSizeOrEquivalentObjectId = obj->variant.hardLinkVariant.equivalentObjectId;
+ }
+ 
+-static void yaffs_CheckpointObjectToObject( yaffs_Object *obj,yaffs_CheckpointObject *cp)
++static int yaffs_CheckpointObjectToObject(yaffs_Object *obj, yaffs_CheckpointObject *cp)
+ {
+ 
+ 	yaffs_Object *parent;
+ 
++	if (obj->variantType != cp->variantType) {
++		T(YAFFS_TRACE_ERROR, (TSTR("Checkpoint read object %d type %d "
++			TCONT("chunk %d does not match existing object type %d")
++			TENDSTR), cp->objectId, cp->variantType, cp->hdrChunk,
++			obj->variantType));
++		return 0;
++	}
++
+ 	obj->objectId = cp->objectId;
+ 
+-	if(cp->parentId)
++	if (cp->parentId)
+ 		parent = yaffs_FindOrCreateObjectByNumber(
+ 					obj->myDev,
+ 					cp->parentId,
+@@ -4189,10 +4244,19 @@ static void yaffs_CheckpointObjectToObje
+ 	else
+ 		parent = NULL;
+ 
+-	if(parent)
++	if (parent) {
++		if (parent->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
++			T(YAFFS_TRACE_ALWAYS, (TSTR("Checkpoint read object %d parent %d type %d"
++				TCONT(" chunk %d Parent type, %d, not directory")
++				TENDSTR),
++				cp->objectId, cp->parentId, cp->variantType,
++				cp->hdrChunk, parent->variantType));
++			return 0;
++		}
+ 		yaffs_AddObjectToDirectory(parent, obj);
++	}
+ 
+-	obj->chunkId = cp->chunkId;
++	obj->hdrChunk = cp->hdrChunk;
+ 	obj->variantType = cp->variantType;
+ 	obj->deleted = cp->deleted;
+ 	obj->softDeleted = cp->softDeleted;
+@@ -4203,29 +4267,34 @@ static void yaffs_CheckpointObjectToObje
+ 	obj->serial = cp->serial;
+ 	obj->nDataChunks = cp->nDataChunks;
+ 
+-	if(obj->variantType == YAFFS_OBJECT_TYPE_FILE)
++	if (obj->variantType == YAFFS_OBJECT_TYPE_FILE)
+ 		obj->variant.fileVariant.fileSize = cp->fileSizeOrEquivalentObjectId;
+-	else if(obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK)
++	else if (obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK)
+ 		obj->variant.hardLinkVariant.equivalentObjectId = cp->fileSizeOrEquivalentObjectId;
+ 
+-	if(obj->objectId >= YAFFS_NOBJECT_BUCKETS)
++	if (obj->hdrChunk > 0)
+ 		obj->lazyLoaded = 1;
++	return 1;
+ }
+ 
+ 
+ 
+-static int yaffs_CheckpointTnodeWorker(yaffs_Object * in, yaffs_Tnode * tn,
+-				  	__u32 level, int chunkOffset)
++static int yaffs_CheckpointTnodeWorker(yaffs_Object *in, yaffs_Tnode *tn,
++					__u32 level, int chunkOffset)
+ {
+ 	int i;
+ 	yaffs_Device *dev = in->myDev;
+ 	int ok = 1;
+-	int nTnodeBytes = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
++	int tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
++
++	if (tnodeSize < sizeof(yaffs_Tnode))
++		tnodeSize = sizeof(yaffs_Tnode);
++
+ 
+ 	if (tn) {
+ 		if (level > 0) {
+ 
+-			for (i = 0; i < YAFFS_NTNODES_INTERNAL && ok; i++){
++			for (i = 0; i < YAFFS_NTNODES_INTERNAL && ok; i++) {
+ 				if (tn->internal[i]) {
+ 					ok = yaffs_CheckpointTnodeWorker(in,
+ 							tn->internal[i],
+@@ -4235,10 +4304,9 @@ static int yaffs_CheckpointTnodeWorker(y
+ 			}
+ 		} else if (level == 0) {
+ 			__u32 baseOffset = chunkOffset <<  YAFFS_TNODES_LEVEL0_BITS;
+-			/* printf("write tnode at %d\n",baseOffset); */
+-			ok = (yaffs_CheckpointWrite(dev,&baseOffset,sizeof(baseOffset)) == sizeof(baseOffset));
+-			if(ok)
+-				ok = (yaffs_CheckpointWrite(dev,tn,nTnodeBytes) == nTnodeBytes);
++			ok = (yaffs_CheckpointWrite(dev, &baseOffset, sizeof(baseOffset)) == sizeof(baseOffset));
++			if (ok)
++				ok = (yaffs_CheckpointWrite(dev, tn, tnodeSize) == tnodeSize);
+ 		}
+ 	}
+ 
+@@ -4251,13 +4319,13 @@ static int yaffs_WriteCheckpointTnodes(y
+ 	__u32 endMarker = ~0;
+ 	int ok = 1;
+ 
+-	if(obj->variantType == YAFFS_OBJECT_TYPE_FILE){
++	if (obj->variantType == YAFFS_OBJECT_TYPE_FILE) {
+ 		ok = yaffs_CheckpointTnodeWorker(obj,
+ 					    obj->variant.fileVariant.top,
+ 					    obj->variant.fileVariant.topLevel,
+ 					    0);
+-		if(ok)
+-			ok = (yaffs_CheckpointWrite(obj->myDev,&endMarker,sizeof(endMarker)) ==
++		if (ok)
++			ok = (yaffs_CheckpointWrite(obj->myDev, &endMarker, sizeof(endMarker)) ==
+ 				sizeof(endMarker));
+ 	}
+ 
+@@ -4272,38 +4340,38 @@ static int yaffs_ReadCheckpointTnodes(ya
+ 	yaffs_FileStructure *fileStructPtr = &obj->variant.fileVariant;
+ 	yaffs_Tnode *tn;
+ 	int nread = 0;
++	int tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
+ 
+-	ok = (yaffs_CheckpointRead(dev,&baseChunk,sizeof(baseChunk)) == sizeof(baseChunk));
++	if (tnodeSize < sizeof(yaffs_Tnode))
++		tnodeSize = sizeof(yaffs_Tnode);
+ 
+-	while(ok && (~baseChunk)){
++	ok = (yaffs_CheckpointRead(dev, &baseChunk, sizeof(baseChunk)) == sizeof(baseChunk));
++
++	while (ok && (~baseChunk)) {
+ 		nread++;
+ 		/* Read level 0 tnode */
+ 
+ 
+-		/* printf("read  tnode at %d\n",baseChunk); */
+ 		tn = yaffs_GetTnodeRaw(dev);
+-		if(tn)
+-			ok = (yaffs_CheckpointRead(dev,tn,(dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8) ==
+-			      (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8);
++		if (tn)
++			ok = (yaffs_CheckpointRead(dev, tn, tnodeSize) == tnodeSize);
+ 		else
+ 			ok = 0;
+ 
+-		if(tn && ok){
++		if (tn && ok)
+ 			ok = yaffs_AddOrFindLevel0Tnode(dev,
+-					       		fileStructPtr,
+-					       		baseChunk,
+-					       		tn) ? 1 : 0;
++							fileStructPtr,
++							baseChunk,
++							tn) ? 1 : 0;
+ 
+-		}
+-
+-		if(ok)
+-			ok = (yaffs_CheckpointRead(dev,&baseChunk,sizeof(baseChunk)) == sizeof(baseChunk));
++		if (ok)
++			ok = (yaffs_CheckpointRead(dev, &baseChunk, sizeof(baseChunk)) == sizeof(baseChunk));
+ 
+ 	}
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(
++	T(YAFFS_TRACE_CHECKPOINT, (
+ 		TSTR("Checkpoint read tnodes %d records, last %d. ok %d" TENDSTR),
+-		nread,baseChunk,ok));
++		nread, baseChunk, ok));
+ 
+ 	return ok ? 1 : 0;
+ }
+@@ -4315,41 +4383,40 @@ static int yaffs_WriteCheckpointObjects(
+ 	yaffs_CheckpointObject cp;
+ 	int i;
+ 	int ok = 1;
+-	struct list_head *lh;
++	struct ylist_head *lh;
+ 
+ 
+ 	/* Iterate through the objects in each hash entry,
+ 	 * dumping them to the checkpointing stream.
+ 	 */
+ 
+-	 for(i = 0; ok &&  i <  YAFFS_NOBJECT_BUCKETS; i++){
+-	 	list_for_each(lh, &dev->objectBucket[i].list) {
++	for (i = 0; ok &&  i <  YAFFS_NOBJECT_BUCKETS; i++) {
++		ylist_for_each(lh, &dev->objectBucket[i].list) {
+ 			if (lh) {
+-				obj = list_entry(lh, yaffs_Object, hashLink);
++				obj = ylist_entry(lh, yaffs_Object, hashLink);
+ 				if (!obj->deferedFree) {
+-					yaffs_ObjectToCheckpointObject(&cp,obj);
++					yaffs_ObjectToCheckpointObject(&cp, obj);
+ 					cp.structType = sizeof(cp);
+ 
+-					T(YAFFS_TRACE_CHECKPOINT,(
++					T(YAFFS_TRACE_CHECKPOINT, (
+ 						TSTR("Checkpoint write object %d parent %d type %d chunk %d obj addr %x" TENDSTR),
+-						cp.objectId,cp.parentId,cp.variantType,cp.chunkId,(unsigned) obj));
++						cp.objectId, cp.parentId, cp.variantType, cp.hdrChunk, (unsigned) obj));
+ 
+-					ok = (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp));
++					ok = (yaffs_CheckpointWrite(dev, &cp, sizeof(cp)) == sizeof(cp));
+ 
+-					if(ok && obj->variantType == YAFFS_OBJECT_TYPE_FILE){
++					if (ok && obj->variantType == YAFFS_OBJECT_TYPE_FILE)
+ 						ok = yaffs_WriteCheckpointTnodes(obj);
+-					}
+ 				}
+ 			}
+ 		}
+-	 }
++	}
+ 
+-	 /* Dump end of list */
+-	memset(&cp,0xFF,sizeof(yaffs_CheckpointObject));
++	/* Dump end of list */
++	memset(&cp, 0xFF, sizeof(yaffs_CheckpointObject));
+ 	cp.structType = sizeof(cp);
+ 
+-	if(ok)
+-		ok = (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp));
++	if (ok)
++		ok = (yaffs_CheckpointWrite(dev, &cp, sizeof(cp)) == sizeof(cp));
+ 
+ 	return ok ? 1 : 0;
+ }
+@@ -4362,38 +4429,39 @@ static int yaffs_ReadCheckpointObjects(y
+ 	int done = 0;
+ 	yaffs_Object *hardList = NULL;
+ 
+-	while(ok && !done) {
+-		ok = (yaffs_CheckpointRead(dev,&cp,sizeof(cp)) == sizeof(cp));
+-		if(cp.structType != sizeof(cp)) {
+-			T(YAFFS_TRACE_CHECKPOINT,(TSTR("struct size %d instead of %d ok %d"TENDSTR),
+-				cp.structType,sizeof(cp),ok));
++	while (ok && !done) {
++		ok = (yaffs_CheckpointRead(dev, &cp, sizeof(cp)) == sizeof(cp));
++		if (cp.structType != sizeof(cp)) {
++			T(YAFFS_TRACE_CHECKPOINT, (TSTR("struct size %d instead of %d ok %d"TENDSTR),
++				cp.structType, sizeof(cp), ok));
+ 			ok = 0;
+ 		}
+ 
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("Checkpoint read object %d parent %d type %d chunk %d " TENDSTR),
+-			cp.objectId,cp.parentId,cp.variantType,cp.chunkId));
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("Checkpoint read object %d parent %d type %d chunk %d " TENDSTR),
++			cp.objectId, cp.parentId, cp.variantType, cp.hdrChunk));
+ 
+-		if(ok && cp.objectId == ~0)
++		if (ok && cp.objectId == ~0)
+ 			done = 1;
+-		else if(ok){
+-			obj = yaffs_FindOrCreateObjectByNumber(dev,cp.objectId, cp.variantType);
+-			if(obj) {
+-				yaffs_CheckpointObjectToObject(obj,&cp);
+-				if(obj->variantType == YAFFS_OBJECT_TYPE_FILE) {
++		else if (ok) {
++			obj = yaffs_FindOrCreateObjectByNumber(dev, cp.objectId, cp.variantType);
++			if (obj) {
++				ok = yaffs_CheckpointObjectToObject(obj, &cp);
++				if (!ok)
++					break;
++				if (obj->variantType == YAFFS_OBJECT_TYPE_FILE) {
+ 					ok = yaffs_ReadCheckpointTnodes(obj);
+-				} else if(obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) {
++				} else if (obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) {
+ 					obj->hardLinks.next =
+-						    (struct list_head *)
+-						    hardList;
++						(struct ylist_head *) hardList;
+ 					hardList = obj;
+ 				}
+-
+-			}
++			} else
++				ok = 0;
+ 		}
+ 	}
+ 
+-	if(ok)
+-		yaffs_HardlinkFixup(dev,hardList);
++	if (ok)
++		yaffs_HardlinkFixup(dev, hardList);
+ 
+ 	return ok ? 1 : 0;
+ }
+@@ -4403,11 +4471,11 @@ static int yaffs_WriteCheckpointSum(yaff
+ 	__u32 checkpointSum;
+ 	int ok;
+ 
+-	yaffs_GetCheckpointSum(dev,&checkpointSum);
++	yaffs_GetCheckpointSum(dev, &checkpointSum);
+ 
+-	ok = (yaffs_CheckpointWrite(dev,&checkpointSum,sizeof(checkpointSum)) == sizeof(checkpointSum));
++	ok = (yaffs_CheckpointWrite(dev, &checkpointSum, sizeof(checkpointSum)) == sizeof(checkpointSum));
+ 
+-	if(!ok)
++	if (!ok)
+ 		return 0;
+ 
+ 	return 1;
+@@ -4419,14 +4487,14 @@ static int yaffs_ReadCheckpointSum(yaffs
+ 	__u32 checkpointSum1;
+ 	int ok;
+ 
+-	yaffs_GetCheckpointSum(dev,&checkpointSum0);
++	yaffs_GetCheckpointSum(dev, &checkpointSum0);
+ 
+-	ok = (yaffs_CheckpointRead(dev,&checkpointSum1,sizeof(checkpointSum1)) == sizeof(checkpointSum1));
++	ok = (yaffs_CheckpointRead(dev, &checkpointSum1, sizeof(checkpointSum1)) == sizeof(checkpointSum1));
+ 
+-	if(!ok)
++	if (!ok)
+ 		return 0;
+ 
+-	if(checkpointSum0 != checkpointSum1)
++	if (checkpointSum0 != checkpointSum1)
+ 		return 0;
+ 
+ 	return 1;
+@@ -4435,46 +4503,43 @@ static int yaffs_ReadCheckpointSum(yaffs
+ 
+ static int yaffs_WriteCheckpointData(yaffs_Device *dev)
+ {
+-
+ 	int ok = 1;
+ 
+-	if(dev->skipCheckpointWrite || !dev->isYaffs2){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("skipping checkpoint write" TENDSTR)));
++	if (dev->skipCheckpointWrite || !dev->isYaffs2) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("skipping checkpoint write" TENDSTR)));
+ 		ok = 0;
+ 	}
+ 
+-	if(ok)
+-		ok = yaffs_CheckpointOpen(dev,1);
++	if (ok)
++		ok = yaffs_CheckpointOpen(dev, 1);
+ 
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint validity" TENDSTR)));
+-		ok = yaffs_WriteCheckpointValidityMarker(dev,1);
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("write checkpoint validity" TENDSTR)));
++		ok = yaffs_WriteCheckpointValidityMarker(dev, 1);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint device" TENDSTR)));
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("write checkpoint device" TENDSTR)));
+ 		ok = yaffs_WriteCheckpointDevice(dev);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint objects" TENDSTR)));
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("write checkpoint objects" TENDSTR)));
+ 		ok = yaffs_WriteCheckpointObjects(dev);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint validity" TENDSTR)));
+-		ok = yaffs_WriteCheckpointValidityMarker(dev,0);
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("write checkpoint validity" TENDSTR)));
++		ok = yaffs_WriteCheckpointValidityMarker(dev, 0);
+ 	}
+ 
+-	if(ok){
++	if (ok)
+ 		ok = yaffs_WriteCheckpointSum(dev);
+-	}
+-
+ 
+-	if(!yaffs_CheckpointClose(dev))
+-		 ok = 0;
++	if (!yaffs_CheckpointClose(dev))
++		ok = 0;
+ 
+-	if(ok)
+-	    	dev->isCheckpointed = 1;
+-	 else
+-	 	dev->isCheckpointed = 0;
++	if (ok)
++		dev->isCheckpointed = 1;
++	else
++		dev->isCheckpointed = 0;
+ 
+ 	return dev->isCheckpointed;
+ }
+@@ -4483,43 +4548,43 @@ static int yaffs_ReadCheckpointData(yaff
+ {
+ 	int ok = 1;
+ 
+-	if(dev->skipCheckpointRead || !dev->isYaffs2){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("skipping checkpoint read" TENDSTR)));
++	if (dev->skipCheckpointRead || !dev->isYaffs2) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("skipping checkpoint read" TENDSTR)));
+ 		ok = 0;
+ 	}
+ 
+-	if(ok)
+-		ok = yaffs_CheckpointOpen(dev,0); /* open for read */
++	if (ok)
++		ok = yaffs_CheckpointOpen(dev, 0); /* open for read */
+ 
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint validity" TENDSTR)));
+-		ok = yaffs_ReadCheckpointValidityMarker(dev,1);
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("read checkpoint validity" TENDSTR)));
++		ok = yaffs_ReadCheckpointValidityMarker(dev, 1);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint device" TENDSTR)));
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("read checkpoint device" TENDSTR)));
+ 		ok = yaffs_ReadCheckpointDevice(dev);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint objects" TENDSTR)));
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("read checkpoint objects" TENDSTR)));
+ 		ok = yaffs_ReadCheckpointObjects(dev);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint validity" TENDSTR)));
+-		ok = yaffs_ReadCheckpointValidityMarker(dev,0);
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("read checkpoint validity" TENDSTR)));
++		ok = yaffs_ReadCheckpointValidityMarker(dev, 0);
+ 	}
+ 
+-	if(ok){
++	if (ok) {
+ 		ok = yaffs_ReadCheckpointSum(dev);
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint checksum %d" TENDSTR),ok));
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("read checkpoint checksum %d" TENDSTR), ok));
+ 	}
+ 
+-	if(!yaffs_CheckpointClose(dev))
++	if (!yaffs_CheckpointClose(dev))
+ 		ok = 0;
+ 
+-	if(ok)
+-	    	dev->isCheckpointed = 1;
+-	 else
+-	 	dev->isCheckpointed = 0;
++	if (ok)
++		dev->isCheckpointed = 1;
++	else
++		dev->isCheckpointed = 0;
+ 
+ 	return ok ? 1 : 0;
+ 
+@@ -4527,11 +4592,11 @@ static int yaffs_ReadCheckpointData(yaff
+ 
+ static void yaffs_InvalidateCheckpoint(yaffs_Device *dev)
+ {
+-	if(dev->isCheckpointed ||
+-	   dev->blocksInCheckpoint > 0){
++	if (dev->isCheckpointed ||
++			dev->blocksInCheckpoint > 0) {
+ 		dev->isCheckpointed = 0;
+ 		yaffs_CheckpointInvalidateStream(dev);
+-		if(dev->superBlock && dev->markSuperBlockDirty)
++		if (dev->superBlock && dev->markSuperBlockDirty)
+ 			dev->markSuperBlockDirty(dev->superBlock);
+ 	}
+ }
+@@ -4540,18 +4605,18 @@ static void yaffs_InvalidateCheckpoint(y
+ int yaffs_CheckpointSave(yaffs_Device *dev)
+ {
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("save entry: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("save entry: isCheckpointed %d"TENDSTR), dev->isCheckpointed));
+ 
+ 	yaffs_VerifyObjects(dev);
+ 	yaffs_VerifyBlocks(dev);
+ 	yaffs_VerifyFreeChunks(dev);
+ 
+-	if(!dev->isCheckpointed) {
++	if (!dev->isCheckpointed) {
+ 		yaffs_InvalidateCheckpoint(dev);
+ 		yaffs_WriteCheckpointData(dev);
+ 	}
+ 
+-	T(YAFFS_TRACE_ALWAYS,(TSTR("save exit: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
++	T(YAFFS_TRACE_ALWAYS, (TSTR("save exit: isCheckpointed %d"TENDSTR), dev->isCheckpointed));
+ 
+ 	return dev->isCheckpointed;
+ }
+@@ -4559,17 +4624,17 @@ int yaffs_CheckpointSave(yaffs_Device *d
+ int yaffs_CheckpointRestore(yaffs_Device *dev)
+ {
+ 	int retval;
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("restore entry: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("restore entry: isCheckpointed %d"TENDSTR), dev->isCheckpointed));
+ 
+ 	retval = yaffs_ReadCheckpointData(dev);
+ 
+-	if(dev->isCheckpointed){
++	if (dev->isCheckpointed) {
+ 		yaffs_VerifyObjects(dev);
+ 		yaffs_VerifyBlocks(dev);
+ 		yaffs_VerifyFreeChunks(dev);
+ 	}
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("restore exit: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("restore exit: isCheckpointed %d"TENDSTR), dev->isCheckpointed));
+ 
+ 	return retval;
+ }
+@@ -4584,12 +4649,12 @@ int yaffs_CheckpointRestore(yaffs_Device
+  * Curve-balls: the first chunk might also be the last chunk.
+  */
+ 
+-int yaffs_ReadDataFromFile(yaffs_Object * in, __u8 * buffer, loff_t offset,
+-			   int nBytes)
++int yaffs_ReadDataFromFile(yaffs_Object *in, __u8 *buffer, loff_t offset,
++			int nBytes)
+ {
+ 
+ 	int chunk;
+-	int start;
++	__u32 start;
+ 	int nToCopy;
+ 	int n = nBytes;
+ 	int nDone = 0;
+@@ -4600,27 +4665,26 @@ int yaffs_ReadDataFromFile(yaffs_Object 
+ 	dev = in->myDev;
+ 
+ 	while (n > 0) {
+-		//chunk = offset / dev->nDataBytesPerChunk + 1;
+-		//start = offset % dev->nDataBytesPerChunk;
+-		yaffs_AddrToChunk(dev,offset,&chunk,&start);
++		/* chunk = offset / dev->nDataBytesPerChunk + 1; */
++		/* start = offset % dev->nDataBytesPerChunk; */
++		yaffs_AddrToChunk(dev, offset, &chunk, &start);
+ 		chunk++;
+ 
+ 		/* OK now check for the curveball where the start and end are in
+ 		 * the same chunk.
+ 		 */
+-		if ((start + n) < dev->nDataBytesPerChunk) {
++		if ((start + n) < dev->nDataBytesPerChunk)
+ 			nToCopy = n;
+-		} else {
++		else
+ 			nToCopy = dev->nDataBytesPerChunk - start;
+-		}
+ 
+ 		cache = yaffs_FindChunkCache(in, chunk);
+ 
+ 		/* If the chunk is already in the cache or it is less than a whole chunk
+-		 * then use the cache (if there is caching)
++		 * or we're using inband tags then use the cache (if there is caching)
+ 		 * else bypass the cache.
+ 		 */
+-		if (cache || nToCopy != dev->nDataBytesPerChunk) {
++		if (cache || nToCopy != dev->nDataBytesPerChunk || dev->inbandTags) {
+ 			if (dev->nShortOpCaches > 0) {
+ 
+ 				/* If we can't find the data in the cache, then load it up. */
+@@ -4641,14 +4705,9 @@ int yaffs_ReadDataFromFile(yaffs_Object 
+ 
+ 				cache->locked = 1;
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_UnlockYAFFS(TRUE);
+-#endif
++
+ 				memcpy(buffer, &cache->data[start], nToCopy);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_LockYAFFS(TRUE);
+-#endif
+ 				cache->locked = 0;
+ 			} else {
+ 				/* Read into the local buffer then copy..*/
+@@ -4657,41 +4716,19 @@ int yaffs_ReadDataFromFile(yaffs_Object 
+ 				    yaffs_GetTempBuffer(dev, __LINE__);
+ 				yaffs_ReadChunkDataFromObject(in, chunk,
+ 							      localBuffer);
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_UnlockYAFFS(TRUE);
+-#endif
++
+ 				memcpy(buffer, &localBuffer[start], nToCopy);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_LockYAFFS(TRUE);
+-#endif
++
+ 				yaffs_ReleaseTempBuffer(dev, localBuffer,
+ 							__LINE__);
+ 			}
+ 
+ 		} else {
+-#ifdef CONFIG_YAFFS_WINCE
+-			__u8 *localBuffer = yaffs_GetTempBuffer(dev, __LINE__);
+-
+-			/* Under WinCE can't do direct transfer. Need to use a local buffer.
+-			 * This is because we otherwise screw up WinCE's memory mapper
+-			 */
+-			yaffs_ReadChunkDataFromObject(in, chunk, localBuffer);
+-
+-#ifdef CONFIG_YAFFS_WINCE
+-			yfsd_UnlockYAFFS(TRUE);
+-#endif
+-			memcpy(buffer, localBuffer, dev->nDataBytesPerChunk);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-			yfsd_LockYAFFS(TRUE);
+-			yaffs_ReleaseTempBuffer(dev, localBuffer, __LINE__);
+-#endif
+-
+-#else
+ 			/* A full chunk. Read directly into the supplied buffer. */
+ 			yaffs_ReadChunkDataFromObject(in, chunk, buffer);
+-#endif
++
+ 		}
+ 
+ 		n -= nToCopy;
+@@ -4704,28 +4741,37 @@ int yaffs_ReadDataFromFile(yaffs_Object 
+ 	return nDone;
+ }
+ 
+-int yaffs_WriteDataToFile(yaffs_Object * in, const __u8 * buffer, loff_t offset,
+-			  int nBytes, int writeThrough)
++int yaffs_WriteDataToFile(yaffs_Object *in, const __u8 *buffer, loff_t offset,
++			int nBytes, int writeThrough)
+ {
+ 
+ 	int chunk;
+-	int start;
++	__u32 start;
+ 	int nToCopy;
+ 	int n = nBytes;
+ 	int nDone = 0;
+ 	int nToWriteBack;
+ 	int startOfWrite = offset;
+ 	int chunkWritten = 0;
+-	int nBytesRead;
++	__u32 nBytesRead;
++	__u32 chunkStart;
+ 
+ 	yaffs_Device *dev;
+ 
+ 	dev = in->myDev;
+ 
+ 	while (n > 0 && chunkWritten >= 0) {
+-		//chunk = offset / dev->nDataBytesPerChunk + 1;
+-		//start = offset % dev->nDataBytesPerChunk;
+-		yaffs_AddrToChunk(dev,offset,&chunk,&start);
++		/* chunk = offset / dev->nDataBytesPerChunk + 1; */
++		/* start = offset % dev->nDataBytesPerChunk; */
++		yaffs_AddrToChunk(dev, offset, &chunk, &start);
++
++		if (chunk * dev->nDataBytesPerChunk + start != offset ||
++				start >= dev->nDataBytesPerChunk) {
++			T(YAFFS_TRACE_ERROR, (
++			   TSTR("AddrToChunk of offset %d gives chunk %d start %d"
++			   TENDSTR),
++			   (int)offset, chunk, start));
++		}
+ 		chunk++;
+ 
+ 		/* OK now check for the curveball where the start and end are in
+@@ -4740,25 +4786,32 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 			 * we need to write back as much as was there before.
+ 			 */
+ 
+-			nBytesRead =
+-			    in->variant.fileVariant.fileSize -
+-			    ((chunk - 1) * dev->nDataBytesPerChunk);
++			chunkStart = ((chunk - 1) * dev->nDataBytesPerChunk);
++
++			if (chunkStart > in->variant.fileVariant.fileSize)
++				nBytesRead = 0; /* Past end of file */
++			else
++				nBytesRead = in->variant.fileVariant.fileSize - chunkStart;
+ 
+-			if (nBytesRead > dev->nDataBytesPerChunk) {
++			if (nBytesRead > dev->nDataBytesPerChunk)
+ 				nBytesRead = dev->nDataBytesPerChunk;
+-			}
+ 
+ 			nToWriteBack =
+ 			    (nBytesRead >
+ 			     (start + n)) ? nBytesRead : (start + n);
+ 
++			if (nToWriteBack < 0 || nToWriteBack > dev->nDataBytesPerChunk)
++				YBUG();
++
+ 		} else {
+ 			nToCopy = dev->nDataBytesPerChunk - start;
+ 			nToWriteBack = dev->nDataBytesPerChunk;
+ 		}
+ 
+-		if (nToCopy != dev->nDataBytesPerChunk) {
+-			/* An incomplete start or end chunk (or maybe both start and end chunk) */
++		if (nToCopy != dev->nDataBytesPerChunk || dev->inbandTags) {
++			/* An incomplete start or end chunk (or maybe both start and end chunk),
++			 * or we're using inband tags, so we want to use the cache buffers.
++			 */
+ 			if (dev->nShortOpCaches > 0) {
+ 				yaffs_ChunkCache *cache;
+ 				/* If we can't find the data in the cache, then load the cache */
+@@ -4775,10 +4828,9 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 					yaffs_ReadChunkDataFromObject(in, chunk,
+ 								      cache->
+ 								      data);
+-				}
+-				else if(cache &&
+-				        !cache->dirty &&
+-					!yaffs_CheckSpaceForAllocation(in->myDev)){
++				} else if (cache &&
++					!cache->dirty &&
++					!yaffs_CheckSpaceForAllocation(in->myDev)) {
+ 					/* Drop the cache if it was a read cache item and
+ 					 * no space check has been made for it.
+ 					 */
+@@ -4788,16 +4840,12 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 				if (cache) {
+ 					yaffs_UseChunkCache(dev, cache, 1);
+ 					cache->locked = 1;
+-#ifdef CONFIG_YAFFS_WINCE
+-					yfsd_UnlockYAFFS(TRUE);
+-#endif
++
+ 
+ 					memcpy(&cache->data[start], buffer,
+ 					       nToCopy);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-					yfsd_LockYAFFS(TRUE);
+-#endif
++
+ 					cache->locked = 0;
+ 					cache->nBytes = nToWriteBack;
+ 
+@@ -4825,15 +4873,10 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 				yaffs_ReadChunkDataFromObject(in, chunk,
+ 							      localBuffer);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_UnlockYAFFS(TRUE);
+-#endif
++
+ 
+ 				memcpy(&localBuffer[start], buffer, nToCopy);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_LockYAFFS(TRUE);
+-#endif
+ 				chunkWritten =
+ 				    yaffs_WriteChunkDataToObject(in, chunk,
+ 								 localBuffer,
+@@ -4846,31 +4889,15 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 			}
+ 
+ 		} else {
+-
+-#ifdef CONFIG_YAFFS_WINCE
+-			/* Under WinCE can't do direct transfer. Need to use a local buffer.
+-			 * This is because we otherwise screw up WinCE's memory mapper
+-			 */
+-			__u8 *localBuffer = yaffs_GetTempBuffer(dev, __LINE__);
+-#ifdef CONFIG_YAFFS_WINCE
+-			yfsd_UnlockYAFFS(TRUE);
+-#endif
+-			memcpy(localBuffer, buffer, dev->nDataBytesPerChunk);
+-#ifdef CONFIG_YAFFS_WINCE
+-			yfsd_LockYAFFS(TRUE);
+-#endif
+-			chunkWritten =
+-			    yaffs_WriteChunkDataToObject(in, chunk, localBuffer,
+-							 dev->nDataBytesPerChunk,
+-							 0);
+-			yaffs_ReleaseTempBuffer(dev, localBuffer, __LINE__);
+-#else
+ 			/* A full chunk. Write directly from the supplied buffer. */
++
++
++
+ 			chunkWritten =
+ 			    yaffs_WriteChunkDataToObject(in, chunk, buffer,
+ 							 dev->nDataBytesPerChunk,
+ 							 0);
+-#endif
++
+ 			/* Since we've overwritten the cached data, we better invalidate it. */
+ 			yaffs_InvalidateChunkCache(in, chunk);
+ 		}
+@@ -4886,9 +4913,8 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 
+ 	/* Update file object */
+ 
+-	if ((startOfWrite + nDone) > in->variant.fileVariant.fileSize) {
++	if ((startOfWrite + nDone) > in->variant.fileVariant.fileSize)
+ 		in->variant.fileVariant.fileSize = (startOfWrite + nDone);
+-	}
+ 
+ 	in->dirty = 1;
+ 
+@@ -4898,7 +4924,7 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 
+ /* ---------------------- File resizing stuff ------------------ */
+ 
+-static void yaffs_PruneResizedChunks(yaffs_Object * in, int newSize)
++static void yaffs_PruneResizedChunks(yaffs_Object *in, int newSize)
+ {
+ 
+ 	yaffs_Device *dev = in->myDev;
+@@ -4939,11 +4965,11 @@ static void yaffs_PruneResizedChunks(yaf
+ 
+ }
+ 
+-int yaffs_ResizeFile(yaffs_Object * in, loff_t newSize)
++int yaffs_ResizeFile(yaffs_Object *in, loff_t newSize)
+ {
+ 
+ 	int oldFileSize = in->variant.fileVariant.fileSize;
+-	int newSizeOfPartialChunk;
++	__u32 newSizeOfPartialChunk;
+ 	int newFullChunks;
+ 
+ 	yaffs_Device *dev = in->myDev;
+@@ -4955,13 +4981,11 @@ int yaffs_ResizeFile(yaffs_Object * in, 
+ 
+ 	yaffs_CheckGarbageCollection(dev);
+ 
+-	if (in->variantType != YAFFS_OBJECT_TYPE_FILE) {
+-		return yaffs_GetFileSize(in);
+-	}
++	if (in->variantType != YAFFS_OBJECT_TYPE_FILE)
++		return YAFFS_FAIL;
+ 
+-	if (newSize == oldFileSize) {
+-		return oldFileSize;
+-	}
++	if (newSize == oldFileSize)
++		return YAFFS_OK;
+ 
+ 	if (newSize < oldFileSize) {
+ 
+@@ -4994,21 +5018,20 @@ int yaffs_ResizeFile(yaffs_Object * in, 
+ 	}
+ 
+ 
+-
+ 	/* Write a new object header.
+ 	 * show we've shrunk the file, if need be
+ 	 * Do this only if the file is not in the deleted directories.
+ 	 */
+-	if (in->parent->objectId != YAFFS_OBJECTID_UNLINKED &&
+-	    in->parent->objectId != YAFFS_OBJECTID_DELETED) {
++	if (in->parent &&
++	    in->parent->objectId != YAFFS_OBJECTID_UNLINKED &&
++	    in->parent->objectId != YAFFS_OBJECTID_DELETED)
+ 		yaffs_UpdateObjectHeader(in, NULL, 0,
+ 					 (newSize < oldFileSize) ? 1 : 0, 0);
+-	}
+ 
+-	return newSize;
++	return YAFFS_OK;
+ }
+ 
+-loff_t yaffs_GetFileSize(yaffs_Object * obj)
++loff_t yaffs_GetFileSize(yaffs_Object *obj)
+ {
+ 	obj = yaffs_GetEquivalentObject(obj);
+ 
+@@ -5024,7 +5047,7 @@ loff_t yaffs_GetFileSize(yaffs_Object * 
+ 
+ 
+ 
+-int yaffs_FlushFile(yaffs_Object * in, int updateTime)
++int yaffs_FlushFile(yaffs_Object *in, int updateTime)
+ {
+ 	int retVal;
+ 	if (in->dirty) {
+@@ -5039,9 +5062,8 @@ int yaffs_FlushFile(yaffs_Object * in, i
+ #endif
+ 		}
+ 
+-		retVal =
+-		    (yaffs_UpdateObjectHeader(in, NULL, 0, 0, 0) >=
+-		     0) ? YAFFS_OK : YAFFS_FAIL;
++		retVal = (yaffs_UpdateObjectHeader(in, NULL, 0, 0, 0) >=
++			0) ? YAFFS_OK : YAFFS_FAIL;
+ 	} else {
+ 		retVal = YAFFS_OK;
+ 	}
+@@ -5050,7 +5072,7 @@ int yaffs_FlushFile(yaffs_Object * in, i
+ 
+ }
+ 
+-static int yaffs_DoGenericObjectDeletion(yaffs_Object * in)
++static int yaffs_DoGenericObjectDeletion(yaffs_Object *in)
+ {
+ 
+ 	/* First off, invalidate the file's data in the cache, without flushing. */
+@@ -5058,13 +5080,13 @@ static int yaffs_DoGenericObjectDeletion
+ 
+ 	if (in->myDev->isYaffs2 && (in->parent != in->myDev->deletedDir)) {
+ 		/* Move to the unlinked directory so we have a record that it was deleted. */
+-		yaffs_ChangeObjectName(in, in->myDev->deletedDir,"deleted", 0, 0);
++		yaffs_ChangeObjectName(in, in->myDev->deletedDir, _Y("deleted"), 0, 0);
+ 
+ 	}
+ 
+ 	yaffs_RemoveObjectFromDirectory(in);
+-	yaffs_DeleteChunk(in->myDev, in->chunkId, 1, __LINE__);
+-	in->chunkId = -1;
++	yaffs_DeleteChunk(in->myDev, in->hdrChunk, 1, __LINE__);
++	in->hdrChunk = 0;
+ 
+ 	yaffs_FreeObject(in);
+ 	return YAFFS_OK;
+@@ -5075,62 +5097,63 @@ static int yaffs_DoGenericObjectDeletion
+  * and the inode associated with the file.
+  * It does not delete the links associated with the file.
+  */
+-static int yaffs_UnlinkFile(yaffs_Object * in)
++static int yaffs_UnlinkFileIfNeeded(yaffs_Object *in)
+ {
+ 
+ 	int retVal;
+ 	int immediateDeletion = 0;
+ 
+-	if (1) {
+ #ifdef __KERNEL__
+-		if (!in->myInode) {
+-			immediateDeletion = 1;
+-
+-		}
++	if (!in->myInode)
++		immediateDeletion = 1;
+ #else
+-		if (in->inUse <= 0) {
+-			immediateDeletion = 1;
+-
+-		}
++	if (in->inUse <= 0)
++		immediateDeletion = 1;
+ #endif
+-		if (immediateDeletion) {
+-			retVal =
+-			    yaffs_ChangeObjectName(in, in->myDev->deletedDir,
+-						   "deleted", 0, 0);
+-			T(YAFFS_TRACE_TRACING,
+-			  (TSTR("yaffs: immediate deletion of file %d" TENDSTR),
+-			   in->objectId));
+-			in->deleted = 1;
+-			in->myDev->nDeletedFiles++;
+-			if (0 && in->myDev->isYaffs2) {
+-				yaffs_ResizeFile(in, 0);
+-			}
+-			yaffs_SoftDeleteFile(in);
+-		} else {
+-			retVal =
+-			    yaffs_ChangeObjectName(in, in->myDev->unlinkedDir,
+-						   "unlinked", 0, 0);
+-		}
+ 
++	if (immediateDeletion) {
++		retVal =
++		    yaffs_ChangeObjectName(in, in->myDev->deletedDir,
++					   _Y("deleted"), 0, 0);
++		T(YAFFS_TRACE_TRACING,
++		  (TSTR("yaffs: immediate deletion of file %d" TENDSTR),
++		   in->objectId));
++		in->deleted = 1;
++		in->myDev->nDeletedFiles++;
++		if (1 || in->myDev->isYaffs2)
++			yaffs_ResizeFile(in, 0);
++		yaffs_SoftDeleteFile(in);
++	} else {
++		retVal =
++		    yaffs_ChangeObjectName(in, in->myDev->unlinkedDir,
++					   _Y("unlinked"), 0, 0);
+ 	}
++
++
+ 	return retVal;
+ }
+ 
+-int yaffs_DeleteFile(yaffs_Object * in)
++int yaffs_DeleteFile(yaffs_Object *in)
+ {
+ 	int retVal = YAFFS_OK;
++	int deleted = in->deleted;
++
++	yaffs_ResizeFile(in, 0);
+ 
+ 	if (in->nDataChunks > 0) {
+-		/* Use soft deletion if there is data in the file */
+-		if (!in->unlinked) {
+-			retVal = yaffs_UnlinkFile(in);
+-		}
++		/* Use soft deletion if there is data in the file.
++		 * That won't be the case if it has been resized to zero.
++		 */
++		if (!in->unlinked)
++			retVal = yaffs_UnlinkFileIfNeeded(in);
++
+ 		if (retVal == YAFFS_OK && in->unlinked && !in->deleted) {
+ 			in->deleted = 1;
++			deleted = 1;
+ 			in->myDev->nDeletedFiles++;
+ 			yaffs_SoftDeleteFile(in);
+ 		}
+-		return in->deleted ? YAFFS_OK : YAFFS_FAIL;
++		return deleted ? YAFFS_OK : YAFFS_FAIL;
+ 	} else {
+ 		/* The file has no data chunks so we toss it immediately */
+ 		yaffs_FreeTnode(in->myDev, in->variant.fileVariant.top);
+@@ -5141,62 +5164,75 @@ int yaffs_DeleteFile(yaffs_Object * in)
+ 	}
+ }
+ 
+-static int yaffs_DeleteDirectory(yaffs_Object * in)
++static int yaffs_DeleteDirectory(yaffs_Object *in)
+ {
+ 	/* First check that the directory is empty. */
+-	if (list_empty(&in->variant.directoryVariant.children)) {
++	if (ylist_empty(&in->variant.directoryVariant.children))
+ 		return yaffs_DoGenericObjectDeletion(in);
+-	}
+ 
+ 	return YAFFS_FAIL;
+ 
+ }
+ 
+-static int yaffs_DeleteSymLink(yaffs_Object * in)
++static int yaffs_DeleteSymLink(yaffs_Object *in)
+ {
+ 	YFREE(in->variant.symLinkVariant.alias);
+ 
+ 	return yaffs_DoGenericObjectDeletion(in);
+ }
+ 
+-static int yaffs_DeleteHardLink(yaffs_Object * in)
++static int yaffs_DeleteHardLink(yaffs_Object *in)
+ {
+ 	/* remove this hardlink from the list assocaited with the equivalent
+ 	 * object
+ 	 */
+-	list_del(&in->hardLinks);
++	ylist_del_init(&in->hardLinks);
+ 	return yaffs_DoGenericObjectDeletion(in);
+ }
+ 
+-static void yaffs_DestroyObject(yaffs_Object * obj)
++int yaffs_DeleteObject(yaffs_Object *obj)
+ {
++int retVal = -1;
+ 	switch (obj->variantType) {
+ 	case YAFFS_OBJECT_TYPE_FILE:
+-		yaffs_DeleteFile(obj);
++		retVal = yaffs_DeleteFile(obj);
+ 		break;
+ 	case YAFFS_OBJECT_TYPE_DIRECTORY:
+-		yaffs_DeleteDirectory(obj);
++		return yaffs_DeleteDirectory(obj);
+ 		break;
+ 	case YAFFS_OBJECT_TYPE_SYMLINK:
+-		yaffs_DeleteSymLink(obj);
++		retVal = yaffs_DeleteSymLink(obj);
+ 		break;
+ 	case YAFFS_OBJECT_TYPE_HARDLINK:
+-		yaffs_DeleteHardLink(obj);
++		retVal = yaffs_DeleteHardLink(obj);
+ 		break;
+ 	case YAFFS_OBJECT_TYPE_SPECIAL:
+-		yaffs_DoGenericObjectDeletion(obj);
++		retVal = yaffs_DoGenericObjectDeletion(obj);
+ 		break;
+ 	case YAFFS_OBJECT_TYPE_UNKNOWN:
++		retVal = 0;
+ 		break;		/* should not happen. */
+ 	}
++
++	return retVal;
+ }
+ 
+-static int yaffs_UnlinkWorker(yaffs_Object * obj)
++static int yaffs_UnlinkWorker(yaffs_Object *obj)
+ {
+ 
++	int immediateDeletion = 0;
++
++#ifdef __KERNEL__
++	if (!obj->myInode)
++		immediateDeletion = 1;
++#else
++	if (obj->inUse <= 0)
++		immediateDeletion = 1;
++#endif
++
+ 	if (obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) {
+ 		return yaffs_DeleteHardLink(obj);
+-	} else if (!list_empty(&obj->hardLinks)) {
++	} else if (!ylist_empty(&obj->hardLinks)) {
+ 		/* Curve ball: We're unlinking an object that has a hardlink.
+ 		 *
+ 		 * This problem arises because we are not strictly following
+@@ -5215,24 +5251,24 @@ static int yaffs_UnlinkWorker(yaffs_Obje
+ 		int retVal;
+ 		YCHAR name[YAFFS_MAX_NAME_LENGTH + 1];
+ 
+-		hl = list_entry(obj->hardLinks.next, yaffs_Object, hardLinks);
++		hl = ylist_entry(obj->hardLinks.next, yaffs_Object, hardLinks);
+ 
+-		list_del_init(&hl->hardLinks);
+-		list_del_init(&hl->siblings);
++		ylist_del_init(&hl->hardLinks);
++		ylist_del_init(&hl->siblings);
+ 
+ 		yaffs_GetObjectName(hl, name, YAFFS_MAX_NAME_LENGTH + 1);
+ 
+ 		retVal = yaffs_ChangeObjectName(obj, hl->parent, name, 0, 0);
+ 
+-		if (retVal == YAFFS_OK) {
++		if (retVal == YAFFS_OK)
+ 			retVal = yaffs_DoGenericObjectDeletion(hl);
+-		}
++
+ 		return retVal;
+ 
+-	} else {
++	} else if (immediateDeletion) {
+ 		switch (obj->variantType) {
+ 		case YAFFS_OBJECT_TYPE_FILE:
+-			return yaffs_UnlinkFile(obj);
++			return yaffs_DeleteFile(obj);
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_DIRECTORY:
+ 			return yaffs_DeleteDirectory(obj);
+@@ -5248,21 +5284,22 @@ static int yaffs_UnlinkWorker(yaffs_Obje
+ 		default:
+ 			return YAFFS_FAIL;
+ 		}
+-	}
++	} else
++		return yaffs_ChangeObjectName(obj, obj->myDev->unlinkedDir,
++					   _Y("unlinked"), 0, 0);
+ }
+ 
+ 
+-static int yaffs_UnlinkObject( yaffs_Object *obj)
++static int yaffs_UnlinkObject(yaffs_Object *obj)
+ {
+ 
+-	if (obj && obj->unlinkAllowed) {
++	if (obj && obj->unlinkAllowed)
+ 		return yaffs_UnlinkWorker(obj);
+-	}
+ 
+ 	return YAFFS_FAIL;
+ 
+ }
+-int yaffs_Unlink(yaffs_Object * dir, const YCHAR * name)
++int yaffs_Unlink(yaffs_Object *dir, const YCHAR *name)
+ {
+ 	yaffs_Object *obj;
+ 
+@@ -5272,8 +5309,8 @@ int yaffs_Unlink(yaffs_Object * dir, con
+ 
+ /*----------------------- Initialisation Scanning ---------------------- */
+ 
+-static void yaffs_HandleShadowedObject(yaffs_Device * dev, int objId,
+-				       int backwardScanning)
++static void yaffs_HandleShadowedObject(yaffs_Device *dev, int objId,
++				int backwardScanning)
+ {
+ 	yaffs_Object *obj;
+ 
+@@ -5286,9 +5323,8 @@ static void yaffs_HandleShadowedObject(y
+ 		/* Handle YAFFS2 case (backward scanning)
+ 		 * If the shadowed object exists then ignore.
+ 		 */
+-		if (yaffs_FindObjectByNumber(dev, objId)) {
++		if (yaffs_FindObjectByNumber(dev, objId))
+ 			return;
+-		}
+ 	}
+ 
+ 	/* Let's create it (if it does not exist) assuming it is a file so that it can do shrinking etc.
+@@ -5297,6 +5333,8 @@ static void yaffs_HandleShadowedObject(y
+ 	obj =
+ 	    yaffs_FindOrCreateObjectByNumber(dev, objId,
+ 					     YAFFS_OBJECT_TYPE_FILE);
++	if (!obj)
++		return;
+ 	yaffs_AddObjectToDirectory(dev->unlinkedDir, obj);
+ 	obj->variant.fileVariant.shrinkSize = 0;
+ 	obj->valid = 1;		/* So that we don't read any other info for this file */
+@@ -5325,44 +5363,77 @@ static void yaffs_HardlinkFixup(yaffs_De
+ 		if (in) {
+ 			/* Add the hardlink pointers */
+ 			hl->variant.hardLinkVariant.equivalentObject = in;
+-			list_add(&hl->hardLinks, &in->hardLinks);
++			ylist_add(&hl->hardLinks, &in->hardLinks);
+ 		} else {
+ 			/* Todo Need to report/handle this better.
+ 			 * Got a problem... hardlink to a non-existant object
+ 			 */
+ 			hl->variant.hardLinkVariant.equivalentObject = NULL;
+-			INIT_LIST_HEAD(&hl->hardLinks);
++			YINIT_LIST_HEAD(&hl->hardLinks);
+ 
+ 		}
+-
+ 	}
++}
++
++
+ 
++
++
++static int ybicmp(const void *a, const void *b)
++{
++	register int aseq = ((yaffs_BlockIndex *)a)->seq;
++	register int bseq = ((yaffs_BlockIndex *)b)->seq;
++	register int ablock = ((yaffs_BlockIndex *)a)->block;
++	register int bblock = ((yaffs_BlockIndex *)b)->block;
++	if (aseq == bseq)
++		return ablock - bblock;
++	else
++		return aseq - bseq;
+ }
+ 
+ 
++struct yaffs_ShadowFixerStruct {
++	int objectId;
++	int shadowedId;
++	struct yaffs_ShadowFixerStruct *next;
++};
++
+ 
++static void yaffs_StripDeletedObjects(yaffs_Device *dev)
++{
++	/*
++	*  Sort out state of unlinked and deleted objects after scanning.
++	*/
++	struct ylist_head *i;
++	struct ylist_head *n;
++	yaffs_Object *l;
+ 
++	/* Soft delete all the unlinked files */
++	ylist_for_each_safe(i, n,
++		&dev->unlinkedDir->variant.directoryVariant.children) {
++		if (i) {
++			l = ylist_entry(i, yaffs_Object, siblings);
++			yaffs_DeleteObject(l);
++		}
++	}
+ 
+-static int ybicmp(const void *a, const void *b){
+-    register int aseq = ((yaffs_BlockIndex *)a)->seq;
+-    register int bseq = ((yaffs_BlockIndex *)b)->seq;
+-    register int ablock = ((yaffs_BlockIndex *)a)->block;
+-    register int bblock = ((yaffs_BlockIndex *)b)->block;
+-    if( aseq == bseq )
+-        return ablock - bblock;
+-    else
+-        return aseq - bseq;
++	ylist_for_each_safe(i, n,
++		&dev->deletedDir->variant.directoryVariant.children) {
++		if (i) {
++			l = ylist_entry(i, yaffs_Object, siblings);
++			yaffs_DeleteObject(l);
++		}
++	}
+ 
+ }
+ 
+-static int yaffs_Scan(yaffs_Device * dev)
++static int yaffs_Scan(yaffs_Device *dev)
+ {
+ 	yaffs_ExtendedTags tags;
+ 	int blk;
+ 	int blockIterator;
+ 	int startIterator;
+ 	int endIterator;
+-	int nBlocksToScan = 0;
+ 	int result;
+ 
+ 	int chunk;
+@@ -5371,26 +5442,19 @@ static int yaffs_Scan(yaffs_Device * dev
+ 	yaffs_BlockState state;
+ 	yaffs_Object *hardList = NULL;
+ 	yaffs_BlockInfo *bi;
+-	int sequenceNumber;
++	__u32 sequenceNumber;
+ 	yaffs_ObjectHeader *oh;
+ 	yaffs_Object *in;
+ 	yaffs_Object *parent;
+-	int nBlocks = dev->internalEndBlock - dev->internalStartBlock + 1;
+ 
+ 	int alloc_failed = 0;
+ 
++	struct yaffs_ShadowFixerStruct *shadowFixerList = NULL;
++
+ 
+ 	__u8 *chunkData;
+ 
+-	yaffs_BlockIndex *blockIndex = NULL;
+ 
+-	if (dev->isYaffs2) {
+-		T(YAFFS_TRACE_SCAN,
+-		  (TSTR("yaffs_Scan is not for YAFFS2!" TENDSTR)));
+-		return YAFFS_FAIL;
+-	}
+-
+-	//TODO  Throw all the yaffs2 stuuf out of yaffs_Scan since it is only for yaffs1 format.
+ 
+ 	T(YAFFS_TRACE_SCAN,
+ 	  (TSTR("yaffs_Scan starts  intstartblk %d intendblk %d..." TENDSTR),
+@@ -5400,12 +5464,6 @@ static int yaffs_Scan(yaffs_Device * dev
+ 
+ 	dev->sequenceNumber = YAFFS_LOWEST_SEQUENCE_NUMBER;
+ 
+-	if (dev->isYaffs2) {
+-		blockIndex = YMALLOC(nBlocks * sizeof(yaffs_BlockIndex));
+-		if(!blockIndex)
+-			return YAFFS_FAIL;
+-	}
+-
+ 	/* Scan all the blocks to determine their state */
+ 	for (blk = dev->internalStartBlock; blk <= dev->internalEndBlock; blk++) {
+ 		bi = yaffs_GetBlockInfo(dev, blk);
+@@ -5418,6 +5476,9 @@ static int yaffs_Scan(yaffs_Device * dev
+ 		bi->blockState = state;
+ 		bi->sequenceNumber = sequenceNumber;
+ 
++		if (bi->sequenceNumber == YAFFS_SEQUENCE_BAD_BLOCK)
++			bi->blockState = state = YAFFS_BLOCK_STATE_DEAD;
++
+ 		T(YAFFS_TRACE_SCAN_DEBUG,
+ 		  (TSTR("Block scanning block %d state %d seq %d" TENDSTR), blk,
+ 		   state, sequenceNumber));
+@@ -5430,70 +5491,21 @@ static int yaffs_Scan(yaffs_Device * dev
+ 			  (TSTR("Block empty " TENDSTR)));
+ 			dev->nErasedBlocks++;
+ 			dev->nFreeChunks += dev->nChunksPerBlock;
+-		} else if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING) {
+-
+-			/* Determine the highest sequence number */
+-			if (dev->isYaffs2 &&
+-			    sequenceNumber >= YAFFS_LOWEST_SEQUENCE_NUMBER &&
+-			    sequenceNumber < YAFFS_HIGHEST_SEQUENCE_NUMBER) {
+-
+-				blockIndex[nBlocksToScan].seq = sequenceNumber;
+-				blockIndex[nBlocksToScan].block = blk;
+-
+-				nBlocksToScan++;
+-
+-				if (sequenceNumber >= dev->sequenceNumber) {
+-					dev->sequenceNumber = sequenceNumber;
+-				}
+-			} else if (dev->isYaffs2) {
+-				/* TODO: Nasty sequence number! */
+-				T(YAFFS_TRACE_SCAN,
+-				  (TSTR
+-				   ("Block scanning block %d has bad sequence number %d"
+-				    TENDSTR), blk, sequenceNumber));
+-
+-			}
+ 		}
+ 	}
+ 
+-	/* Sort the blocks
+-	 * Dungy old bubble sort for now...
+-	 */
+-	if (dev->isYaffs2) {
+-		yaffs_BlockIndex temp;
+-		int i;
+-		int j;
+-
+-		for (i = 0; i < nBlocksToScan; i++)
+-			for (j = i + 1; j < nBlocksToScan; j++)
+-				if (blockIndex[i].seq > blockIndex[j].seq) {
+-					temp = blockIndex[j];
+-					blockIndex[j] = blockIndex[i];
+-					blockIndex[i] = temp;
+-				}
+-	}
+-
+-	/* Now scan the blocks looking at the data. */
+-	if (dev->isYaffs2) {
+-		startIterator = 0;
+-		endIterator = nBlocksToScan - 1;
+-		T(YAFFS_TRACE_SCAN_DEBUG,
+-		  (TSTR("%d blocks to be scanned" TENDSTR), nBlocksToScan));
+-	} else {
+-		startIterator = dev->internalStartBlock;
+-		endIterator = dev->internalEndBlock;
+-	}
++	startIterator = dev->internalStartBlock;
++	endIterator = dev->internalEndBlock;
+ 
+ 	/* For each block.... */
+ 	for (blockIterator = startIterator; !alloc_failed && blockIterator <= endIterator;
+ 	     blockIterator++) {
+ 
+-		if (dev->isYaffs2) {
+-			/* get the block to scan in the correct order */
+-			blk = blockIndex[blockIterator].block;
+-		} else {
+-			blk = blockIterator;
+-		}
++		YYIELD();
++
++		YYIELD();
++
++		blk = blockIterator;
+ 
+ 		bi = yaffs_GetBlockInfo(dev, blk);
+ 		state = bi->blockState;
+@@ -5511,7 +5523,7 @@ static int yaffs_Scan(yaffs_Device * dev
+ 
+ 			/* Let's have a good look at this chunk... */
+ 
+-			if (!dev->isYaffs2 && tags.chunkDeleted) {
++			if (tags.eccResult == YAFFS_ECC_RESULT_UNFIXED || tags.chunkDeleted) {
+ 				/* YAFFS1 only...
+ 				 * A deleted chunk
+ 				 */
+@@ -5540,18 +5552,6 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					dev->allocationBlockFinder = blk;
+ 					/* Set it to here to encourage the allocator to go forth from here. */
+ 
+-					/* Yaffs2 sanity check:
+-					 * This should be the one with the highest sequence number
+-					 */
+-					if (dev->isYaffs2
+-					    && (dev->sequenceNumber !=
+-						bi->sequenceNumber)) {
+-						T(YAFFS_TRACE_ALWAYS,
+-						  (TSTR
+-						   ("yaffs: Allocation block %d was not highest sequence id:"
+-						    " block seq = %d, dev seq = %d"
+-						    TENDSTR), blk,bi->sequenceNumber,dev->sequenceNumber));
+-					}
+ 				}
+ 
+ 				dev->nFreeChunks += (dev->nChunksPerBlock - c);
+@@ -5570,11 +5570,11 @@ static int yaffs_Scan(yaffs_Device * dev
+ 				 * the same chunkId).
+ 				 */
+ 
+-				if(!in)
++				if (!in)
+ 					alloc_failed = 1;
+ 
+-				if(in){
+-					if(!yaffs_PutChunkIntoFile(in, tags.chunkId, chunk,1))
++				if (in) {
++					if (!yaffs_PutChunkIntoFile(in, tags.chunkId, chunk, 1))
+ 						alloc_failed = 1;
+ 				}
+ 
+@@ -5617,7 +5617,7 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					 * deleted, and worse still it has changed type. Delete the old object.
+ 					 */
+ 
+-					yaffs_DestroyObject(in);
++					yaffs_DeleteObject(in);
+ 
+ 					in = 0;
+ 				}
+@@ -5627,14 +5627,20 @@ static int yaffs_Scan(yaffs_Device * dev
+ 								      objectId,
+ 								      oh->type);
+ 
+-				if(!in)
++				if (!in)
+ 					alloc_failed = 1;
+ 
+ 				if (in && oh->shadowsObject > 0) {
+-					yaffs_HandleShadowedObject(dev,
+-								   oh->
+-								   shadowsObject,
+-								   0);
++
++					struct yaffs_ShadowFixerStruct *fixer;
++					fixer = YMALLOC(sizeof(struct yaffs_ShadowFixerStruct));
++					if (fixer) {
++						fixer->next = shadowFixerList;
++						shadowFixerList = fixer;
++						fixer->objectId = tags.objectId;
++						fixer->shadowedId = oh->shadowsObject;
++					}
++
+ 				}
+ 
+ 				if (in && in->valid) {
+@@ -5643,12 +5649,10 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					unsigned existingSerial = in->serial;
+ 					unsigned newSerial = tags.serialNumber;
+ 
+-					if (dev->isYaffs2 ||
+-					    ((existingSerial + 1) & 3) ==
+-					    newSerial) {
++					if (((existingSerial + 1) & 3) == newSerial) {
+ 						/* Use new one - destroy the exisiting one */
+ 						yaffs_DeleteChunk(dev,
+-								  in->chunkId,
++								  in->hdrChunk,
+ 								  1, __LINE__);
+ 						in->valid = 0;
+ 					} else {
+@@ -5681,7 +5685,8 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					in->yst_ctime = oh->yst_ctime;
+ 					in->yst_rdev = oh->yst_rdev;
+ #endif
+-					in->chunkId = chunk;
++					in->hdrChunk = chunk;
++					in->serial = tags.serialNumber;
+ 
+ 				} else if (in && !in->valid) {
+ 					/* we need to load this info */
+@@ -5705,7 +5710,8 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					in->yst_ctime = oh->yst_ctime;
+ 					in->yst_rdev = oh->yst_rdev;
+ #endif
+-					in->chunkId = chunk;
++					in->hdrChunk = chunk;
++					in->serial = tags.serialNumber;
+ 
+ 					yaffs_SetObjectName(in, oh->name);
+ 					in->dirty = 0;
+@@ -5718,25 +5724,25 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					    yaffs_FindOrCreateObjectByNumber
+ 					    (dev, oh->parentObjectId,
+ 					     YAFFS_OBJECT_TYPE_DIRECTORY);
+-					if (parent->variantType ==
++					if (!parent)
++						alloc_failed = 1;
++					if (parent && parent->variantType ==
+ 					    YAFFS_OBJECT_TYPE_UNKNOWN) {
+ 						/* Set up as a directory */
+ 						parent->variantType =
+-						    YAFFS_OBJECT_TYPE_DIRECTORY;
+-						INIT_LIST_HEAD(&parent->variant.
+-							       directoryVariant.
+-							       children);
+-					} else if (parent->variantType !=
+-						   YAFFS_OBJECT_TYPE_DIRECTORY)
+-					{
++							YAFFS_OBJECT_TYPE_DIRECTORY;
++						YINIT_LIST_HEAD(&parent->variant.
++								directoryVariant.
++								children);
++					} else if (!parent || parent->variantType !=
++						   YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 						/* Hoosterman, another problem....
+ 						 * We're trying to use a non-directory as a directory
+ 						 */
+ 
+ 						T(YAFFS_TRACE_ERROR,
+ 						  (TSTR
+-						   ("yaffs tragedy: attempting to use non-directory as"
+-						    " a directory in scan. Put in lost+found."
++						   ("yaffs tragedy: attempting to use non-directory as a directory in scan. Put in lost+found."
+ 						    TENDSTR)));
+ 						parent = dev->lostNFoundDir;
+ 					}
+@@ -5760,15 +5766,6 @@ static int yaffs_Scan(yaffs_Device * dev
+ 						/* Todo got a problem */
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_FILE:
+-						if (dev->isYaffs2
+-						    && oh->isShrink) {
+-							/* Prune back the shrunken chunks */
+-							yaffs_PruneResizedChunks
+-							    (in, oh->fileSize);
+-							/* Mark the block as having a shrinkHeader */
+-							bi->hasShrinkHeader = 1;
+-						}
+-
+ 						if (dev->useHeaderFileSize)
+ 
+ 							in->variant.fileVariant.
+@@ -5778,11 +5775,11 @@ static int yaffs_Scan(yaffs_Device * dev
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_HARDLINK:
+ 						in->variant.hardLinkVariant.
+-						    equivalentObjectId =
+-						    oh->equivalentObjectId;
++							equivalentObjectId =
++							oh->equivalentObjectId;
+ 						in->hardLinks.next =
+-						    (struct list_head *)
+-						    hardList;
++							(struct ylist_head *)
++							hardList;
+ 						hardList = in;
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_DIRECTORY:
+@@ -5794,15 +5791,17 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					case YAFFS_OBJECT_TYPE_SYMLINK:
+ 						in->variant.symLinkVariant.alias =
+ 						    yaffs_CloneString(oh->alias);
+-						if(!in->variant.symLinkVariant.alias)
++						if (!in->variant.symLinkVariant.alias)
+ 							alloc_failed = 1;
+ 						break;
+ 					}
+ 
++/*
+ 					if (parent == dev->deletedDir) {
+ 						yaffs_DestroyObject(in);
+ 						bi->hasShrinkHeader = 1;
+ 					}
++*/
+ 				}
+ 			}
+ 		}
+@@ -5823,10 +5822,6 @@ static int yaffs_Scan(yaffs_Device * dev
+ 
+ 	}
+ 
+-	if (blockIndex) {
+-		YFREE(blockIndex);
+-	}
+-
+ 
+ 	/* Ok, we've done all the scanning.
+ 	 * Fix up the hard link chains.
+@@ -5834,32 +5829,36 @@ static int yaffs_Scan(yaffs_Device * dev
+ 	 * hardlinks.
+ 	 */
+ 
+-	yaffs_HardlinkFixup(dev,hardList);
++	yaffs_HardlinkFixup(dev, hardList);
+ 
+-	/* Handle the unlinked files. Since they were left in an unlinked state we should
+-	 * just delete them.
+-	 */
++	/* Fix up any shadowed objects */
+ 	{
+-		struct list_head *i;
+-		struct list_head *n;
++		struct yaffs_ShadowFixerStruct *fixer;
++		yaffs_Object *obj;
+ 
+-		yaffs_Object *l;
+-		/* Soft delete all the unlinked files */
+-		list_for_each_safe(i, n,
+-				   &dev->unlinkedDir->variant.directoryVariant.
+-				   children) {
+-			if (i) {
+-				l = list_entry(i, yaffs_Object, siblings);
+-				yaffs_DestroyObject(l);
+-			}
++		while (shadowFixerList) {
++			fixer = shadowFixerList;
++			shadowFixerList = fixer->next;
++			/* Complete the rename transaction by deleting the shadowed object
++			 * then setting the object header to unshadowed.
++			 */
++			obj = yaffs_FindObjectByNumber(dev, fixer->shadowedId);
++			if (obj)
++				yaffs_DeleteObject(obj);
++
++			obj = yaffs_FindObjectByNumber(dev, fixer->objectId);
++
++			if (obj)
++				yaffs_UpdateObjectHeader(obj, NULL, 1, 0, 0);
++
++			YFREE(fixer);
+ 		}
+ 	}
+ 
+ 	yaffs_ReleaseTempBuffer(dev, chunkData, __LINE__);
+ 
+-	if(alloc_failed){
++	if (alloc_failed)
+ 		return YAFFS_FAIL;
+-	}
+ 
+ 	T(YAFFS_TRACE_SCAN, (TSTR("yaffs_Scan ends" TENDSTR)));
+ 
+@@ -5871,25 +5870,27 @@ static void yaffs_CheckObjectDetailsLoad
+ {
+ 	__u8 *chunkData;
+ 	yaffs_ObjectHeader *oh;
+-	yaffs_Device *dev = in->myDev;
++	yaffs_Device *dev;
+ 	yaffs_ExtendedTags tags;
+ 	int result;
+ 	int alloc_failed = 0;
+ 
+-	if(!in)
++	if (!in)
+ 		return;
+ 
++	dev = in->myDev;
++
+ #if 0
+-	T(YAFFS_TRACE_SCAN,(TSTR("details for object %d %s loaded" TENDSTR),
++	T(YAFFS_TRACE_SCAN, (TSTR("details for object %d %s loaded" TENDSTR),
+ 		in->objectId,
+ 		in->lazyLoaded ? "not yet" : "already"));
+ #endif
+ 
+-	if(in->lazyLoaded){
++	if (in->lazyLoaded && in->hdrChunk > 0) {
+ 		in->lazyLoaded = 0;
+ 		chunkData = yaffs_GetTempBuffer(dev, __LINE__);
+ 
+-		result = yaffs_ReadChunkWithTagsFromNAND(dev,in->chunkId,chunkData,&tags);
++		result = yaffs_ReadChunkWithTagsFromNAND(dev, in->hdrChunk, chunkData, &tags);
+ 		oh = (yaffs_ObjectHeader *) chunkData;
+ 
+ 		in->yst_mode = oh->yst_mode;
+@@ -5911,18 +5912,18 @@ static void yaffs_CheckObjectDetailsLoad
+ #endif
+ 		yaffs_SetObjectName(in, oh->name);
+ 
+-		if(in->variantType == YAFFS_OBJECT_TYPE_SYMLINK){
+-			 in->variant.symLinkVariant.alias =
++		if (in->variantType == YAFFS_OBJECT_TYPE_SYMLINK) {
++			in->variant.symLinkVariant.alias =
+ 						    yaffs_CloneString(oh->alias);
+-			if(!in->variant.symLinkVariant.alias)
++			if (!in->variant.symLinkVariant.alias)
+ 				alloc_failed = 1; /* Not returned to caller */
+ 		}
+ 
+-		yaffs_ReleaseTempBuffer(dev,chunkData, __LINE__);
++		yaffs_ReleaseTempBuffer(dev, chunkData, __LINE__);
+ 	}
+ }
+ 
+-static int yaffs_ScanBackwards(yaffs_Device * dev)
++static int yaffs_ScanBackwards(yaffs_Device *dev)
+ {
+ 	yaffs_ExtendedTags tags;
+ 	int blk;
+@@ -5938,7 +5939,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 	yaffs_BlockState state;
+ 	yaffs_Object *hardList = NULL;
+ 	yaffs_BlockInfo *bi;
+-	int sequenceNumber;
++	__u32 sequenceNumber;
+ 	yaffs_ObjectHeader *oh;
+ 	yaffs_Object *in;
+ 	yaffs_Object *parent;
+@@ -5972,12 +5973,12 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 	blockIndex = YMALLOC(nBlocks * sizeof(yaffs_BlockIndex));
+ 
+-	if(!blockIndex) {
++	if (!blockIndex) {
+ 		blockIndex = YMALLOC_ALT(nBlocks * sizeof(yaffs_BlockIndex));
+ 		altBlockIndex = 1;
+ 	}
+ 
+-	if(!blockIndex) {
++	if (!blockIndex) {
+ 		T(YAFFS_TRACE_SCAN,
+ 		  (TSTR("yaffs_Scan() could not allocate block index!" TENDSTR)));
+ 		return YAFFS_FAIL;
+@@ -5999,15 +6000,17 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 		bi->blockState = state;
+ 		bi->sequenceNumber = sequenceNumber;
+ 
+-		if(bi->sequenceNumber == YAFFS_SEQUENCE_CHECKPOINT_DATA)
++		if (bi->sequenceNumber == YAFFS_SEQUENCE_CHECKPOINT_DATA)
+ 			bi->blockState = state = YAFFS_BLOCK_STATE_CHECKPOINT;
++		if (bi->sequenceNumber == YAFFS_SEQUENCE_BAD_BLOCK)
++			bi->blockState = state = YAFFS_BLOCK_STATE_DEAD;
+ 
+ 		T(YAFFS_TRACE_SCAN_DEBUG,
+ 		  (TSTR("Block scanning block %d state %d seq %d" TENDSTR), blk,
+ 		   state, sequenceNumber));
+ 
+ 
+-		if(state == YAFFS_BLOCK_STATE_CHECKPOINT){
++		if (state == YAFFS_BLOCK_STATE_CHECKPOINT) {
+ 			dev->blocksInCheckpoint++;
+ 
+ 		} else if (state == YAFFS_BLOCK_STATE_DEAD) {
+@@ -6021,8 +6024,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 		} else if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING) {
+ 
+ 			/* Determine the highest sequence number */
+-			if (dev->isYaffs2 &&
+-			    sequenceNumber >= YAFFS_LOWEST_SEQUENCE_NUMBER &&
++			if (sequenceNumber >= YAFFS_LOWEST_SEQUENCE_NUMBER &&
+ 			    sequenceNumber < YAFFS_HIGHEST_SEQUENCE_NUMBER) {
+ 
+ 				blockIndex[nBlocksToScan].seq = sequenceNumber;
+@@ -6030,10 +6032,9 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 				nBlocksToScan++;
+ 
+-				if (sequenceNumber >= dev->sequenceNumber) {
++				if (sequenceNumber >= dev->sequenceNumber)
+ 					dev->sequenceNumber = sequenceNumber;
+-				}
+-			} else if (dev->isYaffs2) {
++			} else {
+ 				/* TODO: Nasty sequence number! */
+ 				T(YAFFS_TRACE_SCAN,
+ 				  (TSTR
+@@ -6053,11 +6054,13 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 	/* Sort the blocks */
+ #ifndef CONFIG_YAFFS_USE_OWN_SORT
+-	yaffs_qsort(blockIndex, nBlocksToScan,
+-		sizeof(yaffs_BlockIndex), ybicmp);
++	{
++		/* Use qsort now. */
++		yaffs_qsort(blockIndex, nBlocksToScan, sizeof(yaffs_BlockIndex), ybicmp);
++	}
+ #else
+ 	{
+-	 	/* Dungy old bubble sort... */
++		/* Dungy old bubble sort... */
+ 
+ 		yaffs_BlockIndex temp;
+ 		int i;
+@@ -6075,7 +6078,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 	YYIELD();
+ 
+-    	T(YAFFS_TRACE_SCAN, (TSTR("...done" TENDSTR)));
++	T(YAFFS_TRACE_SCAN, (TSTR("...done" TENDSTR)));
+ 
+ 	/* Now scan the blocks looking at the data. */
+ 	startIterator = 0;
+@@ -6085,10 +6088,10 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 	/* For each block.... backwards */
+ 	for (blockIterator = endIterator; !alloc_failed && blockIterator >= startIterator;
+-	     blockIterator--) {
+-	        /* Cooperative multitasking! This loop can run for so
++			blockIterator--) {
++		/* Cooperative multitasking! This loop can run for so
+ 		   long that watchdog timers expire. */
+-	        YYIELD();
++		YYIELD();
+ 
+ 		/* get the block to scan in the correct order */
+ 		blk = blockIndex[blockIterator].block;
+@@ -6127,10 +6130,8 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 				 * this is the one being allocated from
+ 				 */
+ 
+-				if(foundChunksInBlock)
+-				{
++				if (foundChunksInBlock) {
+ 					/* This is a chunk that was skipped due to failing the erased check */
+-
+ 				} else if (c == 0) {
+ 					/* We're looking at the first chunk in the block so the block is unused */
+ 					state = YAFFS_BLOCK_STATE_EMPTY;
+@@ -6138,7 +6139,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 				} else {
+ 					if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING ||
+ 					    state == YAFFS_BLOCK_STATE_ALLOCATING) {
+-					    	if(dev->sequenceNumber == bi->sequenceNumber) {
++						if (dev->sequenceNumber == bi->sequenceNumber) {
+ 							/* this is the block being allocated from */
+ 
+ 							T(YAFFS_TRACE_SCAN,
+@@ -6150,27 +6151,31 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 							dev->allocationBlock = blk;
+ 							dev->allocationPage = c;
+ 							dev->allocationBlockFinder = blk;
+-						}
+-						else {
++						} else {
+ 							/* This is a partially written block that is not
+ 							 * the current allocation block. This block must have
+ 							 * had a write failure, so set up for retirement.
+ 							 */
+ 
+-							 bi->needsRetiring = 1;
++							 /* bi->needsRetiring = 1; ??? TODO */
+ 							 bi->gcPrioritise = 1;
+ 
+ 							 T(YAFFS_TRACE_ALWAYS,
+-							 (TSTR("Partially written block %d being set for retirement" TENDSTR),
++							 (TSTR("Partially written block %d detected" TENDSTR),
+ 							 blk));
+ 						}
+-
+ 					}
+-
+ 				}
+ 
+ 				dev->nFreeChunks++;
+ 
++			} else if (tags.eccResult == YAFFS_ECC_RESULT_UNFIXED) {
++				T(YAFFS_TRACE_SCAN,
++				  (TSTR(" Unfixed ECC in chunk(%d:%d), chunk ignored"TENDSTR),
++				  blk, c));
++
++				  dev->nFreeChunks++;
++
+ 			} else if (tags.chunkId > 0) {
+ 				/* chunkId > 0 so it is a data chunk... */
+ 				unsigned int endpos;
+@@ -6187,7 +6192,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 								      tags.
+ 								      objectId,
+ 								      YAFFS_OBJECT_TYPE_FILE);
+-				if(!in){
++				if (!in) {
+ 					/* Out of memory */
+ 					alloc_failed = 1;
+ 				}
+@@ -6197,8 +6202,8 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 				    && chunkBase <
+ 				    in->variant.fileVariant.shrinkSize) {
+ 					/* This has not been invalidated by a resize */
+-					if(!yaffs_PutChunkIntoFile(in, tags.chunkId,
+-							       chunk, -1)){
++					if (!yaffs_PutChunkIntoFile(in, tags.chunkId,
++							       chunk, -1)) {
+ 						alloc_failed = 1;
+ 					}
+ 
+@@ -6221,7 +6226,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 						    scannedFileSize;
+ 					}
+ 
+-				} else if(in) {
++				} else if (in) {
+ 					/* This chunk has been invalidated by a resize, so delete */
+ 					yaffs_DeleteChunk(dev, chunk, 1, __LINE__);
+ 
+@@ -6242,6 +6247,8 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 					in = yaffs_FindOrCreateObjectByNumber
+ 					    (dev, tags.objectId,
+ 					     tags.extraObjectType);
++					if (!in)
++						alloc_failed = 1;
+ 				}
+ 
+ 				if (!in ||
+@@ -6251,8 +6258,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 				    tags.extraShadows ||
+ 				    (!in->valid &&
+ 				    (tags.objectId == YAFFS_OBJECTID_ROOT ||
+-				     tags.objectId == YAFFS_OBJECTID_LOSTNFOUND))
+-				    ) {
++				     tags.objectId == YAFFS_OBJECTID_LOSTNFOUND))) {
+ 
+ 					/* If we don't have  valid info then we need to read the chunk
+ 					 * TODO In future we can probably defer reading the chunk and
+@@ -6266,8 +6272,17 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 					oh = (yaffs_ObjectHeader *) chunkData;
+ 
+-					if (!in)
++					if (dev->inbandTags) {
++						/* Fix up the header if they got corrupted by inband tags */
++						oh->shadowsObject = oh->inbandShadowsObject;
++						oh->isShrink = oh->inbandIsShrink;
++					}
++
++					if (!in) {
+ 						in = yaffs_FindOrCreateObjectByNumber(dev, tags.objectId, oh->type);
++						if (!in)
++							alloc_failed = 1;
++					}
+ 
+ 				}
+ 
+@@ -6275,10 +6290,9 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 					/* TODO Hoosterman we have a problem! */
+ 					T(YAFFS_TRACE_ERROR,
+ 					  (TSTR
+-					   ("yaffs tragedy: Could not make object for object  %d  "
+-					    "at chunk %d during scan"
++					   ("yaffs tragedy: Could not make object for object  %d at chunk %d during scan"
+ 					    TENDSTR), tags.objectId, chunk));
+-
++					continue;
+ 				}
+ 
+ 				if (in->valid) {
+@@ -6289,10 +6303,9 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 					if ((in->variantType == YAFFS_OBJECT_TYPE_FILE) &&
+ 					     ((oh &&
+-					       oh-> type == YAFFS_OBJECT_TYPE_FILE)||
++					       oh->type == YAFFS_OBJECT_TYPE_FILE) ||
+ 					      (tags.extraHeaderInfoAvailable  &&
+-					       tags.extraObjectType == YAFFS_OBJECT_TYPE_FILE))
+-					    ) {
++					       tags.extraObjectType == YAFFS_OBJECT_TYPE_FILE))) {
+ 						__u32 thisSize =
+ 						    (oh) ? oh->fileSize : tags.
+ 						    extraFileLength;
+@@ -6300,7 +6313,9 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 						    (oh) ? oh->
+ 						    parentObjectId : tags.
+ 						    extraParentObjectId;
+-						unsigned isShrink =
++
++
++						isShrink =
+ 						    (oh) ? oh->isShrink : tags.
+ 						    extraIsShrinkHeader;
+ 
+@@ -6323,9 +6338,8 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 							    thisSize;
+ 						}
+ 
+-						if (isShrink) {
++						if (isShrink)
+ 							bi->hasShrinkHeader = 1;
+-						}
+ 
+ 					}
+ 					/* Use existing - destroy this one. */
+@@ -6333,6 +6347,17 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 				}
+ 
++				if (!in->valid && in->variantType !=
++				    (oh ? oh->type : tags.extraObjectType))
++					T(YAFFS_TRACE_ERROR, (
++						TSTR("yaffs tragedy: Bad object type, "
++					    TCONT("%d != %d, for object %d at chunk ")
++					    TCONT("%d during scan")
++						TENDSTR), oh ?
++					    oh->type : tags.extraObjectType,
++					    in->variantType, tags.objectId,
++					    chunk));
++
+ 				if (!in->valid &&
+ 				    (tags.objectId == YAFFS_OBJECTID_ROOT ||
+ 				     tags.objectId ==
+@@ -6340,7 +6365,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 					/* We only load some info, don't fiddle with directory structure */
+ 					in->valid = 1;
+ 
+-					if(oh) {
++					if (oh) {
+ 						in->variantType = oh->type;
+ 
+ 						in->yst_mode = oh->yst_mode;
+@@ -6365,15 +6390,15 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 						in->lazyLoaded = 1;
+ 					}
+ 
+-					in->chunkId = chunk;
++					in->hdrChunk = chunk;
+ 
+ 				} else if (!in->valid) {
+ 					/* we need to load this info */
+ 
+ 					in->valid = 1;
+-					in->chunkId = chunk;
++					in->hdrChunk = chunk;
+ 
+-					if(oh) {
++					if (oh) {
+ 						in->variantType = oh->type;
+ 
+ 						in->yst_mode = oh->yst_mode;
+@@ -6403,20 +6428,19 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 						yaffs_SetObjectName(in, oh->name);
+ 						parent =
+ 						    yaffs_FindOrCreateObjectByNumber
+-					    		(dev, oh->parentObjectId,
+-					     		 YAFFS_OBJECT_TYPE_DIRECTORY);
++							(dev, oh->parentObjectId,
++							 YAFFS_OBJECT_TYPE_DIRECTORY);
+ 
+ 						 fileSize = oh->fileSize;
+- 						 isShrink = oh->isShrink;
++						 isShrink = oh->isShrink;
+ 						 equivalentObjectId = oh->equivalentObjectId;
+ 
+-					}
+-					else {
++					} else {
+ 						in->variantType = tags.extraObjectType;
+ 						parent =
+ 						    yaffs_FindOrCreateObjectByNumber
+-					    		(dev, tags.extraParentObjectId,
+-					     		 YAFFS_OBJECT_TYPE_DIRECTORY);
++							(dev, tags.extraParentObjectId,
++							 YAFFS_OBJECT_TYPE_DIRECTORY);
+ 						 fileSize = tags.extraFileLength;
+ 						 isShrink = tags.extraIsShrinkHeader;
+ 						 equivalentObjectId = tags.extraEquivalentObjectId;
+@@ -6425,29 +6449,30 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 					}
+ 					in->dirty = 0;
+ 
++					if (!parent)
++						alloc_failed = 1;
++
+ 					/* directory stuff...
+ 					 * hook up to parent
+ 					 */
+ 
+-					if (parent->variantType ==
++					if (parent && parent->variantType ==
+ 					    YAFFS_OBJECT_TYPE_UNKNOWN) {
+ 						/* Set up as a directory */
+ 						parent->variantType =
+-						    YAFFS_OBJECT_TYPE_DIRECTORY;
+-						INIT_LIST_HEAD(&parent->variant.
+-							       directoryVariant.
+-							       children);
+-					} else if (parent->variantType !=
+-						   YAFFS_OBJECT_TYPE_DIRECTORY)
+-					{
++							YAFFS_OBJECT_TYPE_DIRECTORY;
++						YINIT_LIST_HEAD(&parent->variant.
++							directoryVariant.
++							children);
++					} else if (!parent || parent->variantType !=
++						   YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 						/* Hoosterman, another problem....
+ 						 * We're trying to use a non-directory as a directory
+ 						 */
+ 
+ 						T(YAFFS_TRACE_ERROR,
+ 						  (TSTR
+-						   ("yaffs tragedy: attempting to use non-directory as"
+-						    " a directory in scan. Put in lost+found."
++						   ("yaffs tragedy: attempting to use non-directory as a directory in scan. Put in lost+found."
+ 						    TENDSTR)));
+ 						parent = dev->lostNFoundDir;
+ 					}
+@@ -6494,12 +6519,12 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_HARDLINK:
+-						if(!itsUnlinked) {
+-						  in->variant.hardLinkVariant.equivalentObjectId =
+-						    equivalentObjectId;
+-						  in->hardLinks.next =
+-						    (struct list_head *) hardList;
+-						  hardList = in;
++						if (!itsUnlinked) {
++							in->variant.hardLinkVariant.equivalentObjectId =
++								equivalentObjectId;
++							in->hardLinks.next =
++								(struct ylist_head *) hardList;
++							hardList = in;
+ 						}
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_DIRECTORY:
+@@ -6509,12 +6534,11 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 						/* Do nothing */
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_SYMLINK:
+-						if(oh){
+-						   in->variant.symLinkVariant.alias =
+-						    yaffs_CloneString(oh->
+-								      alias);
+-						   if(!in->variant.symLinkVariant.alias)
+-						   	alloc_failed = 1;
++						if (oh) {
++							in->variant.symLinkVariant.alias =
++								yaffs_CloneString(oh->alias);
++							if (!in->variant.symLinkVariant.alias)
++								alloc_failed = 1;
+ 						}
+ 						break;
+ 					}
+@@ -6551,75 +6575,129 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 	 * We should now have scanned all the objects, now it's time to add these
+ 	 * hardlinks.
+ 	 */
+-	yaffs_HardlinkFixup(dev,hardList);
++	yaffs_HardlinkFixup(dev, hardList);
+ 
+ 
+-	/*
+-	*  Sort out state of unlinked and deleted objects.
+-	*/
+-	{
+-		struct list_head *i;
+-		struct list_head *n;
++	yaffs_ReleaseTempBuffer(dev, chunkData, __LINE__);
+ 
+-		yaffs_Object *l;
++	if (alloc_failed)
++		return YAFFS_FAIL;
+ 
+-		/* Soft delete all the unlinked files */
+-		list_for_each_safe(i, n,
+-				   &dev->unlinkedDir->variant.directoryVariant.
+-				   children) {
+-			if (i) {
+-				l = list_entry(i, yaffs_Object, siblings);
+-				yaffs_DestroyObject(l);
+-			}
+-		}
++	T(YAFFS_TRACE_SCAN, (TSTR("yaffs_ScanBackwards ends" TENDSTR)));
+ 
+-		/* Soft delete all the deletedDir files */
+-		list_for_each_safe(i, n,
+-				   &dev->deletedDir->variant.directoryVariant.
+-				   children) {
+-			if (i) {
+-				l = list_entry(i, yaffs_Object, siblings);
+-				yaffs_DestroyObject(l);
++	return YAFFS_OK;
++}
+ 
+-			}
++/*------------------------------  Directory Functions ----------------------------- */
++
++static void yaffs_VerifyObjectInDirectory(yaffs_Object *obj)
++{
++	struct ylist_head *lh;
++	yaffs_Object *listObj;
++
++	int count = 0;
++
++	if (!obj) {
++		T(YAFFS_TRACE_ALWAYS, (TSTR("No object to verify" TENDSTR)));
++		YBUG();
++		return;
++	}
++
++	if (yaffs_SkipVerification(obj->myDev))
++		return;
++
++	if (!obj->parent) {
++		T(YAFFS_TRACE_ALWAYS, (TSTR("Object does not have parent" TENDSTR)));
++		YBUG();
++		return;
++	}
++
++	if (obj->parent->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
++		T(YAFFS_TRACE_ALWAYS, (TSTR("Parent is not directory" TENDSTR)));
++		YBUG();
++	}
++
++	/* Iterate through the objects in each hash entry */
++
++	ylist_for_each(lh, &obj->parent->variant.directoryVariant.children) {
++		if (lh) {
++			listObj = ylist_entry(lh, yaffs_Object, siblings);
++			yaffs_VerifyObject(listObj);
++			if (obj == listObj)
++				count++;
+ 		}
++	 }
++
++	if (count != 1) {
++		T(YAFFS_TRACE_ALWAYS, (TSTR("Object in directory %d times" TENDSTR), count));
++		YBUG();
+ 	}
++}
+ 
+-	yaffs_ReleaseTempBuffer(dev, chunkData, __LINE__);
++static void yaffs_VerifyDirectory(yaffs_Object *directory)
++{
++	struct ylist_head *lh;
++	yaffs_Object *listObj;
+ 
+-	if(alloc_failed){
+-		return YAFFS_FAIL;
++	if (!directory) {
++		YBUG();
++		return;
+ 	}
+ 
+-	T(YAFFS_TRACE_SCAN, (TSTR("yaffs_ScanBackwards ends" TENDSTR)));
++	if (yaffs_SkipFullVerification(directory->myDev))
++		return;
+ 
+-	return YAFFS_OK;
++	if (directory->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
++		T(YAFFS_TRACE_ALWAYS, (TSTR("Directory has wrong type: %d" TENDSTR), directory->variantType));
++		YBUG();
++	}
++
++	/* Iterate through the objects in each hash entry */
++
++	ylist_for_each(lh, &directory->variant.directoryVariant.children) {
++		if (lh) {
++			listObj = ylist_entry(lh, yaffs_Object, siblings);
++			if (listObj->parent != directory) {
++				T(YAFFS_TRACE_ALWAYS, (TSTR("Object in directory list has wrong parent %p" TENDSTR), listObj->parent));
++				YBUG();
++			}
++			yaffs_VerifyObjectInDirectory(listObj);
++		}
++	}
+ }
+ 
+-/*------------------------------  Directory Functions ----------------------------- */
+ 
+-static void yaffs_RemoveObjectFromDirectory(yaffs_Object * obj)
++static void yaffs_RemoveObjectFromDirectory(yaffs_Object *obj)
+ {
+ 	yaffs_Device *dev = obj->myDev;
++	yaffs_Object *parent;
++
++	yaffs_VerifyObjectInDirectory(obj);
++	parent = obj->parent;
++
++	yaffs_VerifyDirectory(parent);
+ 
+-	if(dev && dev->removeObjectCallback)
++	if (dev && dev->removeObjectCallback)
+ 		dev->removeObjectCallback(obj);
+ 
+-	list_del_init(&obj->siblings);
++
++	ylist_del_init(&obj->siblings);
+ 	obj->parent = NULL;
++
++	yaffs_VerifyDirectory(parent);
+ }
+ 
+ 
+-static void yaffs_AddObjectToDirectory(yaffs_Object * directory,
+-				       yaffs_Object * obj)
++static void yaffs_AddObjectToDirectory(yaffs_Object *directory,
++					yaffs_Object *obj)
+ {
+-
+ 	if (!directory) {
+ 		T(YAFFS_TRACE_ALWAYS,
+ 		  (TSTR
+ 		   ("tragedy: Trying to add an object to a null pointer directory"
+ 		    TENDSTR)));
+ 		YBUG();
++		return;
+ 	}
+ 	if (directory->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 		T(YAFFS_TRACE_ALWAYS,
+@@ -6631,37 +6709,42 @@ static void yaffs_AddObjectToDirectory(y
+ 
+ 	if (obj->siblings.prev == NULL) {
+ 		/* Not initialised */
+-		INIT_LIST_HEAD(&obj->siblings);
+-
+-	} else if (!list_empty(&obj->siblings)) {
+-		/* If it is holed up somewhere else, un hook it */
+-		yaffs_RemoveObjectFromDirectory(obj);
++		YBUG();
+ 	}
++
++
++	yaffs_VerifyDirectory(directory);
++
++	yaffs_RemoveObjectFromDirectory(obj);
++
++
+ 	/* Now add it */
+-	list_add(&obj->siblings, &directory->variant.directoryVariant.children);
++	ylist_add(&obj->siblings, &directory->variant.directoryVariant.children);
+ 	obj->parent = directory;
+ 
+ 	if (directory == obj->myDev->unlinkedDir
+-	    || directory == obj->myDev->deletedDir) {
++			|| directory == obj->myDev->deletedDir) {
+ 		obj->unlinked = 1;
+ 		obj->myDev->nUnlinkedFiles++;
+ 		obj->renameAllowed = 0;
+ 	}
++
++	yaffs_VerifyDirectory(directory);
++	yaffs_VerifyObjectInDirectory(obj);
+ }
+ 
+-yaffs_Object *yaffs_FindObjectByName(yaffs_Object * directory,
+-				     const YCHAR * name)
++yaffs_Object *yaffs_FindObjectByName(yaffs_Object *directory,
++				     const YCHAR *name)
+ {
+ 	int sum;
+ 
+-	struct list_head *i;
++	struct ylist_head *i;
+ 	YCHAR buffer[YAFFS_MAX_NAME_LENGTH + 1];
+ 
+ 	yaffs_Object *l;
+ 
+-	if (!name) {
++	if (!name)
+ 		return NULL;
+-	}
+ 
+ 	if (!directory) {
+ 		T(YAFFS_TRACE_ALWAYS,
+@@ -6669,6 +6752,7 @@ yaffs_Object *yaffs_FindObjectByName(yaf
+ 		   ("tragedy: yaffs_FindObjectByName: null pointer directory"
+ 		    TENDSTR)));
+ 		YBUG();
++		return NULL;
+ 	}
+ 	if (directory->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 		T(YAFFS_TRACE_ALWAYS,
+@@ -6679,28 +6763,27 @@ yaffs_Object *yaffs_FindObjectByName(yaf
+ 
+ 	sum = yaffs_CalcNameSum(name);
+ 
+-	list_for_each(i, &directory->variant.directoryVariant.children) {
++	ylist_for_each(i, &directory->variant.directoryVariant.children) {
+ 		if (i) {
+-			l = list_entry(i, yaffs_Object, siblings);
++			l = ylist_entry(i, yaffs_Object, siblings);
++
++			if (l->parent != directory)
++				YBUG();
+ 
+ 			yaffs_CheckObjectDetailsLoaded(l);
+ 
+ 			/* Special case for lost-n-found */
+ 			if (l->objectId == YAFFS_OBJECTID_LOSTNFOUND) {
+-				if (yaffs_strcmp(name, YAFFS_LOSTNFOUND_NAME) == 0) {
++				if (yaffs_strcmp(name, YAFFS_LOSTNFOUND_NAME) == 0)
+ 					return l;
+-				}
+-			} else if (yaffs_SumCompare(l->sum, sum) || l->chunkId <= 0)
+-			{
+-				/* LostnFound cunk called Objxxx
++			} else if (yaffs_SumCompare(l->sum, sum) || l->hdrChunk <= 0) {
++				/* LostnFound chunk called Objxxx
+ 				 * Do a real check
+ 				 */
+ 				yaffs_GetObjectName(l, buffer,
+ 						    YAFFS_MAX_NAME_LENGTH);
+-				if (yaffs_strncmp(name, buffer,YAFFS_MAX_NAME_LENGTH) == 0) {
++				if (yaffs_strncmp(name, buffer, YAFFS_MAX_NAME_LENGTH) == 0)
+ 					return l;
+-				}
+-
+ 			}
+ 		}
+ 	}
+@@ -6710,10 +6793,10 @@ yaffs_Object *yaffs_FindObjectByName(yaf
+ 
+ 
+ #if 0
+-int yaffs_ApplyToDirectoryChildren(yaffs_Object * theDir,
+-				   int (*fn) (yaffs_Object *))
++int yaffs_ApplyToDirectoryChildren(yaffs_Object *theDir,
++					int (*fn) (yaffs_Object *))
+ {
+-	struct list_head *i;
++	struct ylist_head *i;
+ 	yaffs_Object *l;
+ 
+ 	if (!theDir) {
+@@ -6722,20 +6805,21 @@ int yaffs_ApplyToDirectoryChildren(yaffs
+ 		   ("tragedy: yaffs_FindObjectByName: null pointer directory"
+ 		    TENDSTR)));
+ 		YBUG();
++		return YAFFS_FAIL;
+ 	}
+ 	if (theDir->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 		T(YAFFS_TRACE_ALWAYS,
+ 		  (TSTR
+ 		   ("tragedy: yaffs_FindObjectByName: non-directory" TENDSTR)));
+ 		YBUG();
++		return YAFFS_FAIL;
+ 	}
+ 
+-	list_for_each(i, &theDir->variant.directoryVariant.children) {
++	ylist_for_each(i, &theDir->variant.directoryVariant.children) {
+ 		if (i) {
+-			l = list_entry(i, yaffs_Object, siblings);
+-			if (l && !fn(l)) {
++			l = ylist_entry(i, yaffs_Object, siblings);
++			if (l && !fn(l))
+ 				return YAFFS_FAIL;
+-			}
+ 		}
+ 	}
+ 
+@@ -6748,7 +6832,7 @@ int yaffs_ApplyToDirectoryChildren(yaffs
+  * actual object.
+  */
+ 
+-yaffs_Object *yaffs_GetEquivalentObject(yaffs_Object * obj)
++yaffs_Object *yaffs_GetEquivalentObject(yaffs_Object *obj)
+ {
+ 	if (obj && obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) {
+ 		/* We want the object id of the equivalent object, not this one */
+@@ -6756,10 +6840,9 @@ yaffs_Object *yaffs_GetEquivalentObject(
+ 		yaffs_CheckObjectDetailsLoaded(obj);
+ 	}
+ 	return obj;
+-
+ }
+ 
+-int yaffs_GetObjectName(yaffs_Object * obj, YCHAR * name, int buffSize)
++int yaffs_GetObjectName(yaffs_Object *obj, YCHAR *name, int buffSize)
+ {
+ 	memset(name, 0, buffSize * sizeof(YCHAR));
+ 
+@@ -6767,18 +6850,26 @@ int yaffs_GetObjectName(yaffs_Object * o
+ 
+ 	if (obj->objectId == YAFFS_OBJECTID_LOSTNFOUND) {
+ 		yaffs_strncpy(name, YAFFS_LOSTNFOUND_NAME, buffSize - 1);
+-	} else if (obj->chunkId <= 0) {
++	} else if (obj->hdrChunk <= 0) {
+ 		YCHAR locName[20];
++		YCHAR numString[20];
++		YCHAR *x = &numString[19];
++		unsigned v = obj->objectId;
++		numString[19] = 0;
++		while (v > 0) {
++			x--;
++			*x = '0' + (v % 10);
++			v /= 10;
++		}
+ 		/* make up a name */
+-		yaffs_sprintf(locName, _Y("%s%d"), YAFFS_LOSTNFOUND_PREFIX,
+-			      obj->objectId);
++		yaffs_strcpy(locName, YAFFS_LOSTNFOUND_PREFIX);
++		yaffs_strcat(locName, x);
+ 		yaffs_strncpy(name, locName, buffSize - 1);
+ 
+ 	}
+ #ifdef CONFIG_YAFFS_SHORT_NAMES_IN_RAM
+-	else if (obj->shortName[0]) {
++	else if (obj->shortName[0])
+ 		yaffs_strcpy(name, obj->shortName);
+-	}
+ #endif
+ 	else {
+ 		int result;
+@@ -6788,9 +6879,9 @@ int yaffs_GetObjectName(yaffs_Object * o
+ 
+ 		memset(buffer, 0, obj->myDev->nDataBytesPerChunk);
+ 
+-		if (obj->chunkId >= 0) {
++		if (obj->hdrChunk > 0) {
+ 			result = yaffs_ReadChunkWithTagsFromNAND(obj->myDev,
+-							obj->chunkId, buffer,
++							obj->hdrChunk, buffer,
+ 							NULL);
+ 		}
+ 		yaffs_strncpy(name, oh->name, buffSize - 1);
+@@ -6801,46 +6892,43 @@ int yaffs_GetObjectName(yaffs_Object * o
+ 	return yaffs_strlen(name);
+ }
+ 
+-int yaffs_GetObjectFileLength(yaffs_Object * obj)
++int yaffs_GetObjectFileLength(yaffs_Object *obj)
+ {
+-
+ 	/* Dereference any hard linking */
+ 	obj = yaffs_GetEquivalentObject(obj);
+ 
+-	if (obj->variantType == YAFFS_OBJECT_TYPE_FILE) {
++	if (obj->variantType == YAFFS_OBJECT_TYPE_FILE)
+ 		return obj->variant.fileVariant.fileSize;
+-	}
+-	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK) {
++	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK)
+ 		return yaffs_strlen(obj->variant.symLinkVariant.alias);
+-	} else {
++	else {
+ 		/* Only a directory should drop through to here */
+ 		return obj->myDev->nDataBytesPerChunk;
+ 	}
+ }
+ 
+-int yaffs_GetObjectLinkCount(yaffs_Object * obj)
++int yaffs_GetObjectLinkCount(yaffs_Object *obj)
+ {
+ 	int count = 0;
+-	struct list_head *i;
++	struct ylist_head *i;
+ 
+-	if (!obj->unlinked) {
+-		count++;	/* the object itself */
+-	}
+-	list_for_each(i, &obj->hardLinks) {
+-		count++;	/* add the hard links; */
+-	}
+-	return count;
++	if (!obj->unlinked)
++		count++;		/* the object itself */
++
++	ylist_for_each(i, &obj->hardLinks)
++		count++;		/* add the hard links; */
+ 
++	return count;
+ }
+ 
+-int yaffs_GetObjectInode(yaffs_Object * obj)
++int yaffs_GetObjectInode(yaffs_Object *obj)
+ {
+ 	obj = yaffs_GetEquivalentObject(obj);
+ 
+ 	return obj->objectId;
+ }
+ 
+-unsigned yaffs_GetObjectType(yaffs_Object * obj)
++unsigned yaffs_GetObjectType(yaffs_Object *obj)
+ {
+ 	obj = yaffs_GetEquivalentObject(obj);
+ 
+@@ -6872,19 +6960,18 @@ unsigned yaffs_GetObjectType(yaffs_Objec
+ 	}
+ }
+ 
+-YCHAR *yaffs_GetSymlinkAlias(yaffs_Object * obj)
++YCHAR *yaffs_GetSymlinkAlias(yaffs_Object *obj)
+ {
+ 	obj = yaffs_GetEquivalentObject(obj);
+-	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK) {
++	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK)
+ 		return yaffs_CloneString(obj->variant.symLinkVariant.alias);
+-	} else {
++	else
+ 		return yaffs_CloneString(_Y(""));
+-	}
+ }
+ 
+ #ifndef CONFIG_YAFFS_WINCE
+ 
+-int yaffs_SetAttributes(yaffs_Object * obj, struct iattr *attr)
++int yaffs_SetAttributes(yaffs_Object *obj, struct iattr *attr)
+ {
+ 	unsigned int valid = attr->ia_valid;
+ 
+@@ -6910,7 +6997,7 @@ int yaffs_SetAttributes(yaffs_Object * o
+ 	return YAFFS_OK;
+ 
+ }
+-int yaffs_GetAttributes(yaffs_Object * obj, struct iattr *attr)
++int yaffs_GetAttributes(yaffs_Object *obj, struct iattr *attr)
+ {
+ 	unsigned int valid = 0;
+ 
+@@ -6934,13 +7021,12 @@ int yaffs_GetAttributes(yaffs_Object * o
+ 	attr->ia_valid = valid;
+ 
+ 	return YAFFS_OK;
+-
+ }
+ 
+ #endif
+ 
+ #if 0
+-int yaffs_DumpObject(yaffs_Object * obj)
++int yaffs_DumpObject(yaffs_Object *obj)
+ {
+ 	YCHAR name[257];
+ 
+@@ -6951,7 +7037,7 @@ int yaffs_DumpObject(yaffs_Object * obj)
+ 	   ("Object %d, inode %d \"%s\"\n dirty %d valid %d serial %d sum %d"
+ 	    " chunk %d type %d size %d\n"
+ 	    TENDSTR), obj->objectId, yaffs_GetObjectInode(obj), name,
+-	   obj->dirty, obj->valid, obj->serial, obj->sum, obj->chunkId,
++	   obj->dirty, obj->valid, obj->serial, obj->sum, obj->hdrChunk,
+ 	   yaffs_GetObjectType(obj), yaffs_GetObjectFileLength(obj)));
+ 
+ 	return YAFFS_OK;
+@@ -6960,7 +7046,7 @@ int yaffs_DumpObject(yaffs_Object * obj)
+ 
+ /*---------------------------- Initialisation code -------------------------------------- */
+ 
+-static int yaffs_CheckDevFunctions(const yaffs_Device * dev)
++static int yaffs_CheckDevFunctions(const yaffs_Device *dev)
+ {
+ 
+ 	/* Common functions, gotta have */
+@@ -7011,7 +7097,7 @@ static int yaffs_CreateInitialDirectorie
+ 	    yaffs_CreateFakeDirectory(dev, YAFFS_OBJECTID_LOSTNFOUND,
+ 				      YAFFS_LOSTNFOUND_MODE | S_IFDIR);
+ 
+-	if(dev->lostNFoundDir && dev->rootDir && dev->unlinkedDir && dev->deletedDir){
++	if (dev->lostNFoundDir && dev->rootDir && dev->unlinkedDir && dev->deletedDir) {
+ 		yaffs_AddObjectToDirectory(dev->rootDir, dev->lostNFoundDir);
+ 		return YAFFS_OK;
+ 	}
+@@ -7019,7 +7105,7 @@ static int yaffs_CreateInitialDirectorie
+ 	return YAFFS_FAIL;
+ }
+ 
+-int yaffs_GutsInitialise(yaffs_Device * dev)
++int yaffs_GutsInitialise(yaffs_Device *dev)
+ {
+ 	int init_failed = 0;
+ 	unsigned x;
+@@ -7040,6 +7126,8 @@ int yaffs_GutsInitialise(yaffs_Device * 
+ 	dev->chunkOffset = 0;
+ 	dev->nFreeChunks = 0;
+ 
++	dev->gcBlock = -1;
++
+ 	if (dev->startBlock == 0) {
+ 		dev->internalStartBlock = dev->startBlock + 1;
+ 		dev->internalEndBlock = dev->endBlock + 1;
+@@ -7049,18 +7137,18 @@ int yaffs_GutsInitialise(yaffs_Device * 
+ 
+ 	/* Check geometry parameters. */
+ 
+-	if ((dev->isYaffs2 && dev->nDataBytesPerChunk < 1024) ||
+-	    (!dev->isYaffs2 && dev->nDataBytesPerChunk != 512) ||
++	if ((!dev->inbandTags && dev->isYaffs2 && dev->totalBytesPerChunk < 1024) ||
++	    (!dev->isYaffs2 && dev->totalBytesPerChunk < 512) ||
++	    (dev->inbandTags && !dev->isYaffs2) ||
+ 	     dev->nChunksPerBlock < 2 ||
+ 	     dev->nReservedBlocks < 2 ||
+ 	     dev->internalStartBlock <= 0 ||
+ 	     dev->internalEndBlock <= 0 ||
+-	     dev->internalEndBlock <= (dev->internalStartBlock + dev->nReservedBlocks + 2)	// otherwise it is too small
+-	    ) {
++	     dev->internalEndBlock <= (dev->internalStartBlock + dev->nReservedBlocks + 2)) {	/* otherwise it is too small */
+ 		T(YAFFS_TRACE_ALWAYS,
+ 		  (TSTR
+-		   ("yaffs: NAND geometry problems: chunk size %d, type is yaffs%s "
+-		    TENDSTR), dev->nDataBytesPerChunk, dev->isYaffs2 ? "2" : ""));
++		   ("yaffs: NAND geometry problems: chunk size %d, type is yaffs%s, inbandTags %d "
++		    TENDSTR), dev->totalBytesPerChunk, dev->isYaffs2 ? "2" : "", dev->inbandTags));
+ 		return YAFFS_FAIL;
+ 	}
+ 
+@@ -7070,6 +7158,12 @@ int yaffs_GutsInitialise(yaffs_Device * 
+ 		return YAFFS_FAIL;
+ 	}
+ 
++	/* Sort out space for inband tags, if required */
++	if (dev->inbandTags)
++		dev->nDataBytesPerChunk = dev->totalBytesPerChunk - sizeof(yaffs_PackedTags2TagsPart);
++	else
++		dev->nDataBytesPerChunk = dev->totalBytesPerChunk;
++
+ 	/* Got the right mix of functions? */
+ 	if (!yaffs_CheckDevFunctions(dev)) {
+ 		/* Function missing */
+@@ -7097,31 +7191,18 @@ int yaffs_GutsInitialise(yaffs_Device * 
+ 
+ 	dev->isMounted = 1;
+ 
+-
+-
+ 	/* OK now calculate a few things for the device */
+ 
+ 	/*
+ 	 *  Calculate all the chunk size manipulation numbers:
+ 	 */
+-	 /* Start off assuming it is a power of 2 */
+-	 dev->chunkShift = ShiftDiv(dev->nDataBytesPerChunk);
+-	 dev->chunkMask = (1<<dev->chunkShift) - 1;
+-
+-	 if(dev->nDataBytesPerChunk == (dev->chunkMask + 1)){
+-	 	/* Yes it is a power of 2, disable crumbs */
+-		dev->crumbMask = 0;
+-		dev->crumbShift = 0;
+-		dev->crumbsPerChunk = 0;
+-	 } else {
+-	 	/* Not a power of 2, use crumbs instead */
+-		dev->crumbShift = ShiftDiv(sizeof(yaffs_PackedTags2TagsPart));
+-		dev->crumbMask = (1<<dev->crumbShift)-1;
+-		dev->crumbsPerChunk = dev->nDataBytesPerChunk/(1 << dev->crumbShift);
+-		dev->chunkShift = 0;
+-		dev->chunkMask = 0;
+-	}
+-
++	x = dev->nDataBytesPerChunk;
++	/* We always use dev->chunkShift and dev->chunkDiv */
++	dev->chunkShift = Shifts(x);
++	x >>= dev->chunkShift;
++	dev->chunkDiv = x;
++	/* We only use chunk mask if chunkDiv is 1 */
++	dev->chunkMask = (1<<dev->chunkShift) - 1;
+ 
+ 	/*
+ 	 * Calculate chunkGroupBits.
+@@ -7133,16 +7214,15 @@ int yaffs_GutsInitialise(yaffs_Device * 
+ 	bits = ShiftsGE(x);
+ 
+ 	/* Set up tnode width if wide tnodes are enabled. */
+-	if(!dev->wideTnodesDisabled){
++	if (!dev->wideTnodesDisabled) {
+ 		/* bits must be even so that we end up with 32-bit words */
+-		if(bits & 1)
++		if (bits & 1)
+ 			bits++;
+-		if(bits < 16)
++		if (bits < 16)
+ 			dev->tnodeWidth = 16;
+ 		else
+ 			dev->tnodeWidth = bits;
+-	}
+-	else
++	} else
+ 		dev->tnodeWidth = 16;
+ 
+ 	dev->tnodeMask = (1<<dev->tnodeWidth)-1;
+@@ -7193,7 +7273,7 @@ int yaffs_GutsInitialise(yaffs_Device * 
+ 	dev->hasPendingPrioritisedGCs = 1; /* Assume the worst for now, will get fixed on first GC */
+ 
+ 	/* Initialise temporary buffers and caches. */
+-	if(!yaffs_InitialiseTempBuffers(dev))
++	if (!yaffs_InitialiseTempBuffers(dev))
+ 		init_failed = 1;
+ 
+ 	dev->srCache = NULL;
+@@ -7203,25 +7283,26 @@ int yaffs_GutsInitialise(yaffs_Device * 
+ 	if (!init_failed &&
+ 	    dev->nShortOpCaches > 0) {
+ 		int i;
+-		__u8 *buf;
++		void *buf;
+ 		int srCacheBytes = dev->nShortOpCaches * sizeof(yaffs_ChunkCache);
+ 
+-		if (dev->nShortOpCaches > YAFFS_MAX_SHORT_OP_CACHES) {
++		if (dev->nShortOpCaches > YAFFS_MAX_SHORT_OP_CACHES)
+ 			dev->nShortOpCaches = YAFFS_MAX_SHORT_OP_CACHES;
+-		}
+ 
+-		buf = dev->srCache =  YMALLOC(srCacheBytes);
++		dev->srCache =  YMALLOC(srCacheBytes);
+ 
+-		if(dev->srCache)
+-			memset(dev->srCache,0,srCacheBytes);
++		buf = (__u8 *) dev->srCache;
++
++		if (dev->srCache)
++			memset(dev->srCache, 0, srCacheBytes);
+ 
+ 		for (i = 0; i < dev->nShortOpCaches && buf; i++) {
+ 			dev->srCache[i].object = NULL;
+ 			dev->srCache[i].lastUse = 0;
+ 			dev->srCache[i].dirty = 0;
+-			dev->srCache[i].data = buf = YMALLOC_DMA(dev->nDataBytesPerChunk);
++			dev->srCache[i].data = buf = YMALLOC_DMA(dev->totalBytesPerChunk);
+ 		}
+-		if(!buf)
++		if (!buf)
+ 			init_failed = 1;
+ 
+ 		dev->srLastUse = 0;
+@@ -7229,29 +7310,30 @@ int yaffs_GutsInitialise(yaffs_Device * 
+ 
+ 	dev->cacheHits = 0;
+ 
+-	if(!init_failed){
++	if (!init_failed) {
+ 		dev->gcCleanupList = YMALLOC(dev->nChunksPerBlock * sizeof(__u32));
+-		if(!dev->gcCleanupList)
++		if (!dev->gcCleanupList)
+ 			init_failed = 1;
+ 	}
+ 
+-	if (dev->isYaffs2) {
++	if (dev->isYaffs2)
+ 		dev->useHeaderFileSize = 1;
+-	}
+-	if(!init_failed && !yaffs_InitialiseBlocks(dev))
++
++	if (!init_failed && !yaffs_InitialiseBlocks(dev))
+ 		init_failed = 1;
+ 
+ 	yaffs_InitialiseTnodes(dev);
+ 	yaffs_InitialiseObjects(dev);
+ 
+-	if(!init_failed && !yaffs_CreateInitialDirectories(dev))
++	if (!init_failed && !yaffs_CreateInitialDirectories(dev))
+ 		init_failed = 1;
+ 
+ 
+-	if(!init_failed){
++	if (!init_failed) {
+ 		/* Now scan the flash. */
+ 		if (dev->isYaffs2) {
+-			if(yaffs_CheckpointRestore(dev)) {
++			if (yaffs_CheckpointRestore(dev)) {
++				yaffs_CheckObjectDetailsLoaded(dev->rootDir);
+ 				T(YAFFS_TRACE_ALWAYS,
+ 				  (TSTR("yaffs: restored from checkpoint" TENDSTR)));
+ 			} else {
+@@ -7273,24 +7355,25 @@ int yaffs_GutsInitialise(yaffs_Device * 
+ 				dev->nBackgroundDeletions = 0;
+ 				dev->oldestDirtySequence = 0;
+ 
+-				if(!init_failed && !yaffs_InitialiseBlocks(dev))
++				if (!init_failed && !yaffs_InitialiseBlocks(dev))
+ 					init_failed = 1;
+ 
+ 				yaffs_InitialiseTnodes(dev);
+ 				yaffs_InitialiseObjects(dev);
+ 
+-				if(!init_failed && !yaffs_CreateInitialDirectories(dev))
++				if (!init_failed && !yaffs_CreateInitialDirectories(dev))
+ 					init_failed = 1;
+ 
+-				if(!init_failed && !yaffs_ScanBackwards(dev))
++				if (!init_failed && !yaffs_ScanBackwards(dev))
+ 					init_failed = 1;
+ 			}
+-		}else
+-			if(!yaffs_Scan(dev))
++		} else if (!yaffs_Scan(dev))
+ 				init_failed = 1;
++
++		yaffs_StripDeletedObjects(dev);
+ 	}
+ 
+-	if(init_failed){
++	if (init_failed) {
+ 		/* Clean up the mess */
+ 		T(YAFFS_TRACE_TRACING,
+ 		  (TSTR("yaffs: yaffs_GutsInitialise() aborted.\n" TENDSTR)));
+@@ -7318,7 +7401,7 @@ int yaffs_GutsInitialise(yaffs_Device * 
+ 
+ }
+ 
+-void yaffs_Deinitialise(yaffs_Device * dev)
++void yaffs_Deinitialise(yaffs_Device *dev)
+ {
+ 	if (dev->isMounted) {
+ 		int i;
+@@ -7330,7 +7413,7 @@ void yaffs_Deinitialise(yaffs_Device * d
+ 		    dev->srCache) {
+ 
+ 			for (i = 0; i < dev->nShortOpCaches; i++) {
+-				if(dev->srCache[i].data)
++				if (dev->srCache[i].data)
+ 					YFREE(dev->srCache[i].data);
+ 				dev->srCache[i].data = NULL;
+ 			}
+@@ -7341,16 +7424,17 @@ void yaffs_Deinitialise(yaffs_Device * d
+ 
+ 		YFREE(dev->gcCleanupList);
+ 
+-		for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
++		for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++)
+ 			YFREE(dev->tempBuffer[i].buffer);
+-		}
+ 
+ 		dev->isMounted = 0;
+-	}
+ 
++		if (dev->deinitialiseNAND)
++			dev->deinitialiseNAND(dev);
++	}
+ }
+ 
+-static int yaffs_CountFreeChunks(yaffs_Device * dev)
++static int yaffs_CountFreeChunks(yaffs_Device *dev)
+ {
+ 	int nFree;
+ 	int b;
+@@ -7358,7 +7442,7 @@ static int yaffs_CountFreeChunks(yaffs_D
+ 	yaffs_BlockInfo *blk;
+ 
+ 	for (nFree = 0, b = dev->internalStartBlock; b <= dev->internalEndBlock;
+-	     b++) {
++			b++) {
+ 		blk = yaffs_GetBlockInfo(dev, b);
+ 
+ 		switch (blk->blockState) {
+@@ -7373,19 +7457,19 @@ static int yaffs_CountFreeChunks(yaffs_D
+ 		default:
+ 			break;
+ 		}
+-
+ 	}
+ 
+ 	return nFree;
+ }
+ 
+-int yaffs_GetNumberOfFreeChunks(yaffs_Device * dev)
++int yaffs_GetNumberOfFreeChunks(yaffs_Device *dev)
+ {
+ 	/* This is what we report to the outside world */
+ 
+ 	int nFree;
+ 	int nDirtyCacheChunks;
+ 	int blocksForCheckpoint;
++	int i;
+ 
+ #if 1
+ 	nFree = dev->nFreeChunks;
+@@ -7397,12 +7481,9 @@ int yaffs_GetNumberOfFreeChunks(yaffs_De
+ 
+ 	/* Now count the number of dirty chunks in the cache and subtract those */
+ 
+-	{
+-		int i;
+-		for (nDirtyCacheChunks = 0, i = 0; i < dev->nShortOpCaches; i++) {
+-			if (dev->srCache[i].dirty)
+-				nDirtyCacheChunks++;
+-		}
++	for (nDirtyCacheChunks = 0, i = 0; i < dev->nShortOpCaches; i++) {
++		if (dev->srCache[i].dirty)
++			nDirtyCacheChunks++;
+ 	}
+ 
+ 	nFree -= nDirtyCacheChunks;
+@@ -7410,8 +7491,8 @@ int yaffs_GetNumberOfFreeChunks(yaffs_De
+ 	nFree -= ((dev->nReservedBlocks + 1) * dev->nChunksPerBlock);
+ 
+ 	/* Now we figure out how much to reserve for the checkpoint and report that... */
+-	blocksForCheckpoint = dev->nCheckpointReservedBlocks - dev->blocksInCheckpoint;
+-	if(blocksForCheckpoint < 0)
++	blocksForCheckpoint = yaffs_CalcCheckpointBlocksRequired(dev) - dev->blocksInCheckpoint;
++	if (blocksForCheckpoint < 0)
+ 		blocksForCheckpoint = 0;
+ 
+ 	nFree -= (blocksForCheckpoint * dev->nChunksPerBlock);
+@@ -7425,12 +7506,12 @@ int yaffs_GetNumberOfFreeChunks(yaffs_De
+ 
+ static int yaffs_freeVerificationFailures;
+ 
+-static void yaffs_VerifyFreeChunks(yaffs_Device * dev)
++static void yaffs_VerifyFreeChunks(yaffs_Device *dev)
+ {
+ 	int counted;
+ 	int difference;
+ 
+-	if(yaffs_SkipVerification(dev))
++	if (yaffs_SkipVerification(dev))
+ 		return;
+ 
+ 	counted = yaffs_CountFreeChunks(dev);
+@@ -7447,23 +7528,25 @@ static void yaffs_VerifyFreeChunks(yaffs
+ 
+ /*---------------------------------------- YAFFS test code ----------------------*/
+ 
+-#define yaffs_CheckStruct(structure,syze, name) \
+-           if(sizeof(structure) != syze) \
+-	       { \
+-	         T(YAFFS_TRACE_ALWAYS,(TSTR("%s should be %d but is %d\n" TENDSTR),\
+-		 name,syze,sizeof(structure))); \
+-	         return YAFFS_FAIL; \
+-		}
++#define yaffs_CheckStruct(structure, syze, name) \
++	do { \
++		if (sizeof(structure) != syze) { \
++			T(YAFFS_TRACE_ALWAYS, (TSTR("%s should be %d but is %d\n" TENDSTR),\
++				name, syze, sizeof(structure))); \
++			return YAFFS_FAIL; \
++		} \
++	} while (0)
+ 
+ static int yaffs_CheckStructures(void)
+ {
+-/*      yaffs_CheckStruct(yaffs_Tags,8,"yaffs_Tags") */
+-/*      yaffs_CheckStruct(yaffs_TagsUnion,8,"yaffs_TagsUnion") */
+-/*      yaffs_CheckStruct(yaffs_Spare,16,"yaffs_Spare") */
++/*      yaffs_CheckStruct(yaffs_Tags,8,"yaffs_Tags"); */
++/*      yaffs_CheckStruct(yaffs_TagsUnion,8,"yaffs_TagsUnion"); */
++/*      yaffs_CheckStruct(yaffs_Spare,16,"yaffs_Spare"); */
+ #ifndef CONFIG_YAFFS_TNODE_LIST_DEBUG
+-	yaffs_CheckStruct(yaffs_Tnode, 2 * YAFFS_NTNODES_LEVEL0, "yaffs_Tnode")
++	yaffs_CheckStruct(yaffs_Tnode, 2 * YAFFS_NTNODES_LEVEL0, "yaffs_Tnode");
+ #endif
+-	    yaffs_CheckStruct(yaffs_ObjectHeader, 512, "yaffs_ObjectHeader")
+-
+-	    return YAFFS_OK;
++#ifndef CONFIG_YAFFS_WINCE
++	yaffs_CheckStruct(yaffs_ObjectHeader, 512, "yaffs_ObjectHeader");
++#endif
++	return YAFFS_OK;
+ }
+--- a/fs/yaffs2/yaffs_guts.h
++++ b/fs/yaffs2/yaffs_guts.h
+@@ -90,7 +90,7 @@
+ 
+ #define YAFFS_MAX_SHORT_OP_CACHES	20
+ 
+-#define YAFFS_N_TEMP_BUFFERS		4
++#define YAFFS_N_TEMP_BUFFERS		6
+ 
+ /* We limit the number attempts at sucessfully saving a chunk of data.
+  * Small-page devices have 32 pages per block; large-page devices have 64.
+@@ -108,6 +108,9 @@
+ #define YAFFS_LOWEST_SEQUENCE_NUMBER	0x00001000
+ #define YAFFS_HIGHEST_SEQUENCE_NUMBER	0xEFFFFF00
+ 
++/* Special sequence number for bad block that failed to be marked bad */
++#define YAFFS_SEQUENCE_BAD_BLOCK	0xFFFF0000
++
+ /* ChunkCache is used for short read/write operations.*/
+ typedef struct {
+ 	struct yaffs_ObjectStruct *object;
+@@ -134,11 +137,10 @@ typedef struct {
+ typedef struct {
+ 	unsigned chunkId:20;
+ 	unsigned serialNumber:2;
+-	unsigned byteCount:10;
++	unsigned byteCountLSB:10;
+ 	unsigned objectId:18;
+ 	unsigned ecc:12;
+-	unsigned unusedStuff:2;
+-
++	unsigned byteCountMSB:2;
+ } yaffs_Tags;
+ 
+ typedef union {
+@@ -277,13 +279,13 @@ typedef struct {
+ 
+ 	int softDeletions:10;	/* number of soft deleted pages */
+ 	int pagesInUse:10;	/* number of pages in use */
+-	yaffs_BlockState blockState:4;	/* One of the above block states */
++	unsigned blockState:4;	/* One of the above block states. NB use unsigned because enum is sometimes an int */
+ 	__u32 needsRetiring:1;	/* Data has failed on this block, need to get valid data off */
+-                        	/* and retire the block. */
+-	__u32 skipErasedCheck: 1; /* If this is set we can skip the erased check on this block */
+-	__u32 gcPrioritise: 1; 	/* An ECC check or blank check has failed on this block.
++				/* and retire the block. */
++	__u32 skipErasedCheck:1; /* If this is set we can skip the erased check on this block */
++	__u32 gcPrioritise:1; 	/* An ECC check or blank check has failed on this block.
+ 				   It should be prioritised for GC */
+-        __u32 chunkErrorStrikes:3; /* How many times we've had ecc etc failures on this block and tried to reuse it */
++	__u32 chunkErrorStrikes:3; /* How many times we've had ecc etc failures on this block and tried to reuse it */
+ 
+ #ifdef CONFIG_YAFFS_YAFFS2
+ 	__u32 hasShrinkHeader:1; /* This block has at least one shrink object header */
+@@ -300,11 +302,11 @@ typedef struct {
+ 
+ 	/* Apply to everything  */
+ 	int parentObjectId;
+-	__u16 sum__NoLongerUsed;	/* checksum of name. No longer used */
++	__u16 sum__NoLongerUsed;        /* checksum of name. No longer used */
+ 	YCHAR name[YAFFS_MAX_NAME_LENGTH + 1];
+ 
+-	/* Thes following apply to directories, files, symlinks - not hard links */
+-	__u32 yst_mode;		/* protection */
++	/* The following apply to directories, files, symlinks - not hard links */
++	__u32 yst_mode;         /* protection */
+ 
+ #ifdef CONFIG_YAFFS_WINCE
+ 	__u32 notForWinCE[5];
+@@ -331,11 +333,14 @@ typedef struct {
+ 	__u32 win_ctime[2];
+ 	__u32 win_atime[2];
+ 	__u32 win_mtime[2];
+-	__u32 roomToGrow[4];
+ #else
+-	__u32 roomToGrow[10];
++	__u32 roomToGrow[6];
++
+ #endif
++	__u32 inbandShadowsObject;
++	__u32 inbandIsShrink;
+ 
++	__u32 reservedSpace[2];
+ 	int shadowsObject;	/* This object header shadows the specified object if > 0 */
+ 
+ 	/* isShrink applies to object headers written when we shrink the file (ie resize) */
+@@ -381,7 +386,7 @@ typedef struct {
+ } yaffs_FileStructure;
+ 
+ typedef struct {
+-	struct list_head children;	/* list of child links */
++	struct ylist_head children;     /* list of child links */
+ } yaffs_DirectoryStructure;
+ 
+ typedef struct {
+@@ -418,23 +423,24 @@ struct yaffs_ObjectStruct {
+ 				 * still in the inode cache. Free of object is defered.
+ 				 * until the inode is released.
+ 				 */
++	__u8 beingCreated:1;	/* This object is still being created so skip some checks. */
+ 
+ 	__u8 serial;		/* serial number of chunk in NAND. Cached here */
+ 	__u16 sum;		/* sum of the name to speed searching */
+ 
+-	struct yaffs_DeviceStruct *myDev;	/* The device I'm on */
++	struct yaffs_DeviceStruct *myDev;       /* The device I'm on */
+ 
+-	struct list_head hashLink;	/* list of objects in this hash bucket */
++	struct ylist_head hashLink;     /* list of objects in this hash bucket */
+ 
+-	struct list_head hardLinks;	/* all the equivalent hard linked objects */
++	struct ylist_head hardLinks;    /* all the equivalent hard linked objects */
+ 
+ 	/* directory structure stuff */
+ 	/* also used for linking up the free list */
+ 	struct yaffs_ObjectStruct *parent;
+-	struct list_head siblings;
++	struct ylist_head siblings;
+ 
+ 	/* Where's my object header in NAND? */
+-	int chunkId;
++	int hdrChunk;
+ 
+ 	int nDataChunks;	/* Number of data chunks attached to the file. */
+ 
+@@ -485,7 +491,7 @@ struct yaffs_ObjectList_struct {
+ typedef struct yaffs_ObjectList_struct yaffs_ObjectList;
+ 
+ typedef struct {
+-	struct list_head list;
++	struct ylist_head list;
+ 	int count;
+ } yaffs_ObjectBucket;
+ 
+@@ -495,11 +501,10 @@ typedef struct {
+  */
+ 
+ typedef struct {
+-        int structType;
++	int structType;
+ 	__u32 objectId;
+ 	__u32 parentId;
+-	int chunkId;
+-
++	int hdrChunk;
+ 	yaffs_ObjectType variantType:3;
+ 	__u8 deleted:1;
+ 	__u8 softDeleted:1;
+@@ -511,8 +516,7 @@ typedef struct {
+ 
+ 	int nDataChunks;
+ 	__u32 fileSizeOrEquivalentObjectId;
+-
+-}yaffs_CheckpointObject;
++} yaffs_CheckpointObject;
+ 
+ /*--------------------- Temporary buffers ----------------
+  *
+@@ -528,13 +532,13 @@ typedef struct {
+ /*----------------- Device ---------------------------------*/
+ 
+ struct yaffs_DeviceStruct {
+-	struct list_head devList;
++	struct ylist_head devList;
+ 	const char *name;
+ 
+ 	/* Entry parameters set up way early. Yaffs sets up the rest.*/
+ 	int nDataBytesPerChunk;	/* Should be a power of 2 >= 512 */
+ 	int nChunksPerBlock;	/* does not need to be a power of 2 */
+-	int nBytesPerSpare;	/* spare area size */
++	int spareBytesPerChunk;	/* spare area size */
+ 	int startBlock;		/* Start block we're allowed to use */
+ 	int endBlock;		/* End block we're allowed to use */
+ 	int nReservedBlocks;	/* We want this tuneable so that we can reduce */
+@@ -544,9 +548,7 @@ struct yaffs_DeviceStruct {
+ 	/* Stuff used by the shared space checkpointing mechanism */
+ 	/* If this value is zero, then this mechanism is disabled */
+ 
+-	int nCheckpointReservedBlocks; /* Blocks to reserve for checkpoint data */
+-
+-
++/*	int nCheckpointReservedBlocks; */ /* Blocks to reserve for checkpoint data */
+ 
+ 
+ 	int nShortOpCaches;	/* If <= 0, then short op caching is disabled, else
+@@ -560,30 +562,31 @@ struct yaffs_DeviceStruct {
+ 	void *genericDevice;	/* Pointer to device context
+ 				 * On an mtd this holds the mtd pointer.
+ 				 */
+-        void *superBlock;
++	void *superBlock;
+ 
+ 	/* NAND access functions (Must be set before calling YAFFS)*/
+ 
+-	int (*writeChunkToNAND) (struct yaffs_DeviceStruct * dev,
+-				 int chunkInNAND, const __u8 * data,
+-				 const yaffs_Spare * spare);
+-	int (*readChunkFromNAND) (struct yaffs_DeviceStruct * dev,
+-				  int chunkInNAND, __u8 * data,
+-				  yaffs_Spare * spare);
+-	int (*eraseBlockInNAND) (struct yaffs_DeviceStruct * dev,
+-				 int blockInNAND);
+-	int (*initialiseNAND) (struct yaffs_DeviceStruct * dev);
++	int (*writeChunkToNAND) (struct yaffs_DeviceStruct *dev,
++					int chunkInNAND, const __u8 *data,
++					const yaffs_Spare *spare);
++	int (*readChunkFromNAND) (struct yaffs_DeviceStruct *dev,
++					int chunkInNAND, __u8 *data,
++					yaffs_Spare *spare);
++	int (*eraseBlockInNAND) (struct yaffs_DeviceStruct *dev,
++					int blockInNAND);
++	int (*initialiseNAND) (struct yaffs_DeviceStruct *dev);
++	int (*deinitialiseNAND) (struct yaffs_DeviceStruct *dev);
+ 
+ #ifdef CONFIG_YAFFS_YAFFS2
+-	int (*writeChunkWithTagsToNAND) (struct yaffs_DeviceStruct * dev,
+-					 int chunkInNAND, const __u8 * data,
+-					 const yaffs_ExtendedTags * tags);
+-	int (*readChunkWithTagsFromNAND) (struct yaffs_DeviceStruct * dev,
+-					  int chunkInNAND, __u8 * data,
+-					  yaffs_ExtendedTags * tags);
+-	int (*markNANDBlockBad) (struct yaffs_DeviceStruct * dev, int blockNo);
+-	int (*queryNANDBlock) (struct yaffs_DeviceStruct * dev, int blockNo,
+-			       yaffs_BlockState * state, int *sequenceNumber);
++	int (*writeChunkWithTagsToNAND) (struct yaffs_DeviceStruct *dev,
++					 int chunkInNAND, const __u8 *data,
++					 const yaffs_ExtendedTags *tags);
++	int (*readChunkWithTagsFromNAND) (struct yaffs_DeviceStruct *dev,
++					  int chunkInNAND, __u8 *data,
++					  yaffs_ExtendedTags *tags);
++	int (*markNANDBlockBad) (struct yaffs_DeviceStruct *dev, int blockNo);
++	int (*queryNANDBlock) (struct yaffs_DeviceStruct *dev, int blockNo,
++			       yaffs_BlockState *state, __u32 *sequenceNumber);
+ #endif
+ 
+ 	int isYaffs2;
+@@ -595,10 +598,12 @@ struct yaffs_DeviceStruct {
+ 	void (*removeObjectCallback)(struct yaffs_ObjectStruct *obj);
+ 
+ 	/* Callback to mark the superblock dirsty */
+-	void (*markSuperBlockDirty)(void * superblock);
++	void (*markSuperBlockDirty)(void *superblock);
+ 
+ 	int wideTnodesDisabled; /* Set to disable wide tnodes */
+ 
++	YCHAR *pathDividers;	/* String of legal path dividers */
++
+ 
+ 	/* End of stuff that must be set before initialisation. */
+ 
+@@ -615,16 +620,14 @@ struct yaffs_DeviceStruct {
+ 	__u32 tnodeWidth;
+ 	__u32 tnodeMask;
+ 
+-	/* Stuff to support various file offses to chunk/offset translations */
+-	/* "Crumbs" for nDataBytesPerChunk not being a power of 2 */
+-	__u32 crumbMask;
+-	__u32 crumbShift;
+-	__u32 crumbsPerChunk;
+-
+-	/* Straight shifting for nDataBytesPerChunk being a power of 2 */
+-	__u32 chunkShift;
+-	__u32 chunkMask;
+-
++	/* Stuff for figuring out file offset to chunk conversions */
++	__u32 chunkShift; /* Shift value */
++	__u32 chunkDiv;   /* Divisor after shifting: 1 for power-of-2 sizes */
++	__u32 chunkMask;  /* Mask to use for power-of-2 case */
++
++	/* Stuff to handle inband tags */
++	int inbandTags;
++	__u32 totalBytesPerChunk;
+ 
+ #ifdef __KERNEL__
+ 
+@@ -633,7 +636,7 @@ struct yaffs_DeviceStruct {
+ 	__u8 *spareBuffer;	/* For mtdif2 use. Don't know the size of the buffer
+ 				 * at compile time so we have to allocate it.
+ 				 */
+-	void (*putSuperFunc) (struct super_block * sb);
++	void (*putSuperFunc) (struct super_block *sb);
+ #endif
+ 
+ 	int isMounted;
+@@ -663,6 +666,8 @@ struct yaffs_DeviceStruct {
+ 	__u32 checkpointSum;
+ 	__u32 checkpointXor;
+ 
++	int nCheckpointBlocksRequired; /* Number of blocks needed to store current checkpoint set */
++
+ 	/* Block Info */
+ 	yaffs_BlockInfo *blockInfo;
+ 	__u8 *chunkBits;	/* bitmap of chunks in use */
+@@ -684,11 +689,15 @@ struct yaffs_DeviceStruct {
+ 	yaffs_TnodeList *allocatedTnodeList;
+ 
+ 	int isDoingGC;
++	int gcBlock;
++	int gcChunk;
+ 
+ 	int nObjectsCreated;
+ 	yaffs_Object *freeObjects;
+ 	int nFreeObjects;
+ 
++	int nHardLinks;
++
+ 	yaffs_ObjectList *allocatedObjectList;
+ 
+ 	yaffs_ObjectBucket objectBucket[YAFFS_NOBJECT_BUCKETS];
+@@ -745,8 +754,10 @@ struct yaffs_DeviceStruct {
+ 	int nBackgroundDeletions;	/* Count of background deletions. */
+ 
+ 
++	/* Temporary buffer management */
+ 	yaffs_TempBuffer tempBuffer[YAFFS_N_TEMP_BUFFERS];
+ 	int maxTemp;
++	int tempInUse;
+ 	int unmanagedTempAllocations;
+ 	int unmanagedTempDeallocations;
+ 
+@@ -758,9 +769,9 @@ struct yaffs_DeviceStruct {
+ 
+ typedef struct yaffs_DeviceStruct yaffs_Device;
+ 
+-/* The static layout of bllock usage etc is stored in the super block header */
++/* The static layout of block usage etc is stored in the super block header */
+ typedef struct {
+-        int StructType;
++	int StructType;
+ 	int version;
+ 	int checkpointStartBlock;
+ 	int checkpointEndBlock;
+@@ -773,7 +784,7 @@ typedef struct {
+  * must be preserved over unmount/mount cycles.
+  */
+ typedef struct {
+-        int structType;
++	int structType;
+ 	int nErasedBlocks;
+ 	int allocationBlock;	/* Current block being allocated off */
+ 	__u32 allocationPage;
+@@ -791,57 +802,45 @@ typedef struct {
+ 
+ 
+ typedef struct {
+-    int structType;
+-    __u32 magic;
+-    __u32 version;
+-    __u32 head;
++	int structType;
++	__u32 magic;
++	__u32 version;
++	__u32 head;
+ } yaffs_CheckpointValidity;
+ 
+-/* Function to manipulate block info */
+-static Y_INLINE yaffs_BlockInfo *yaffs_GetBlockInfo(yaffs_Device * dev, int blk)
+-{
+-	if (blk < dev->internalStartBlock || blk > dev->internalEndBlock) {
+-		T(YAFFS_TRACE_ERROR,
+-		  (TSTR
+-		   ("**>> yaffs: getBlockInfo block %d is not valid" TENDSTR),
+-		   blk));
+-		YBUG();
+-	}
+-	return &dev->blockInfo[blk - dev->internalStartBlock];
+-}
+ 
+ /*----------------------- YAFFS Functions -----------------------*/
+ 
+-int yaffs_GutsInitialise(yaffs_Device * dev);
+-void yaffs_Deinitialise(yaffs_Device * dev);
++int yaffs_GutsInitialise(yaffs_Device *dev);
++void yaffs_Deinitialise(yaffs_Device *dev);
+ 
+-int yaffs_GetNumberOfFreeChunks(yaffs_Device * dev);
++int yaffs_GetNumberOfFreeChunks(yaffs_Device *dev);
+ 
+-int yaffs_RenameObject(yaffs_Object * oldDir, const YCHAR * oldName,
+-		       yaffs_Object * newDir, const YCHAR * newName);
++int yaffs_RenameObject(yaffs_Object *oldDir, const YCHAR *oldName,
++		       yaffs_Object *newDir, const YCHAR *newName);
+ 
+-int yaffs_Unlink(yaffs_Object * dir, const YCHAR * name);
+-int yaffs_DeleteFile(yaffs_Object * obj);
++int yaffs_Unlink(yaffs_Object *dir, const YCHAR *name);
++int yaffs_DeleteObject(yaffs_Object *obj);
+ 
+-int yaffs_GetObjectName(yaffs_Object * obj, YCHAR * name, int buffSize);
+-int yaffs_GetObjectFileLength(yaffs_Object * obj);
+-int yaffs_GetObjectInode(yaffs_Object * obj);
+-unsigned yaffs_GetObjectType(yaffs_Object * obj);
+-int yaffs_GetObjectLinkCount(yaffs_Object * obj);
++int yaffs_GetObjectName(yaffs_Object *obj, YCHAR *name, int buffSize);
++int yaffs_GetObjectFileLength(yaffs_Object *obj);
++int yaffs_GetObjectInode(yaffs_Object *obj);
++unsigned yaffs_GetObjectType(yaffs_Object *obj);
++int yaffs_GetObjectLinkCount(yaffs_Object *obj);
+ 
+-int yaffs_SetAttributes(yaffs_Object * obj, struct iattr *attr);
+-int yaffs_GetAttributes(yaffs_Object * obj, struct iattr *attr);
++int yaffs_SetAttributes(yaffs_Object *obj, struct iattr *attr);
++int yaffs_GetAttributes(yaffs_Object *obj, struct iattr *attr);
+ 
+ /* File operations */
+-int yaffs_ReadDataFromFile(yaffs_Object * obj, __u8 * buffer, loff_t offset,
+-			   int nBytes);
+-int yaffs_WriteDataToFile(yaffs_Object * obj, const __u8 * buffer, loff_t offset,
+-			  int nBytes, int writeThrough);
+-int yaffs_ResizeFile(yaffs_Object * obj, loff_t newSize);
+-
+-yaffs_Object *yaffs_MknodFile(yaffs_Object * parent, const YCHAR * name,
+-			      __u32 mode, __u32 uid, __u32 gid);
+-int yaffs_FlushFile(yaffs_Object * obj, int updateTime);
++int yaffs_ReadDataFromFile(yaffs_Object *obj, __u8 *buffer, loff_t offset,
++				int nBytes);
++int yaffs_WriteDataToFile(yaffs_Object *obj, const __u8 *buffer, loff_t offset,
++				int nBytes, int writeThrough);
++int yaffs_ResizeFile(yaffs_Object *obj, loff_t newSize);
++
++yaffs_Object *yaffs_MknodFile(yaffs_Object *parent, const YCHAR *name,
++				__u32 mode, __u32 uid, __u32 gid);
++int yaffs_FlushFile(yaffs_Object *obj, int updateTime);
+ 
+ /* Flushing and checkpointing */
+ void yaffs_FlushEntireDeviceCache(yaffs_Device *dev);
+@@ -850,33 +849,33 @@ int yaffs_CheckpointSave(yaffs_Device *d
+ int yaffs_CheckpointRestore(yaffs_Device *dev);
+ 
+ /* Directory operations */
+-yaffs_Object *yaffs_MknodDirectory(yaffs_Object * parent, const YCHAR * name,
+-				   __u32 mode, __u32 uid, __u32 gid);
+-yaffs_Object *yaffs_FindObjectByName(yaffs_Object * theDir, const YCHAR * name);
+-int yaffs_ApplyToDirectoryChildren(yaffs_Object * theDir,
++yaffs_Object *yaffs_MknodDirectory(yaffs_Object *parent, const YCHAR *name,
++				__u32 mode, __u32 uid, __u32 gid);
++yaffs_Object *yaffs_FindObjectByName(yaffs_Object *theDir, const YCHAR *name);
++int yaffs_ApplyToDirectoryChildren(yaffs_Object *theDir,
+ 				   int (*fn) (yaffs_Object *));
+ 
+-yaffs_Object *yaffs_FindObjectByNumber(yaffs_Device * dev, __u32 number);
++yaffs_Object *yaffs_FindObjectByNumber(yaffs_Device *dev, __u32 number);
+ 
+ /* Link operations */
+-yaffs_Object *yaffs_Link(yaffs_Object * parent, const YCHAR * name,
+-			 yaffs_Object * equivalentObject);
++yaffs_Object *yaffs_Link(yaffs_Object *parent, const YCHAR *name,
++			 yaffs_Object *equivalentObject);
+ 
+-yaffs_Object *yaffs_GetEquivalentObject(yaffs_Object * obj);
++yaffs_Object *yaffs_GetEquivalentObject(yaffs_Object *obj);
+ 
+ /* Symlink operations */
+-yaffs_Object *yaffs_MknodSymLink(yaffs_Object * parent, const YCHAR * name,
++yaffs_Object *yaffs_MknodSymLink(yaffs_Object *parent, const YCHAR *name,
+ 				 __u32 mode, __u32 uid, __u32 gid,
+-				 const YCHAR * alias);
+-YCHAR *yaffs_GetSymlinkAlias(yaffs_Object * obj);
++				 const YCHAR *alias);
++YCHAR *yaffs_GetSymlinkAlias(yaffs_Object *obj);
+ 
+ /* Special inodes (fifos, sockets and devices) */
+-yaffs_Object *yaffs_MknodSpecial(yaffs_Object * parent, const YCHAR * name,
++yaffs_Object *yaffs_MknodSpecial(yaffs_Object *parent, const YCHAR *name,
+ 				 __u32 mode, __u32 uid, __u32 gid, __u32 rdev);
+ 
+ /* Special directories */
+-yaffs_Object *yaffs_Root(yaffs_Device * dev);
+-yaffs_Object *yaffs_LostNFound(yaffs_Device * dev);
++yaffs_Object *yaffs_Root(yaffs_Device *dev);
++yaffs_Object *yaffs_LostNFound(yaffs_Device *dev);
+ 
+ #ifdef CONFIG_YAFFS_WINCE
+ /* CONFIG_YAFFS_WINCE special stuff */
+@@ -885,18 +884,21 @@ void yfsd_WinFileTimeNow(__u32 target[2]
+ 
+ #ifdef __KERNEL__
+ 
+-void yaffs_HandleDeferedFree(yaffs_Object * obj);
++void yaffs_HandleDeferedFree(yaffs_Object *obj);
+ #endif
+ 
+ /* Debug dump  */
+-int yaffs_DumpObject(yaffs_Object * obj);
++int yaffs_DumpObject(yaffs_Object *obj);
+ 
+-void yaffs_GutsTest(yaffs_Device * dev);
++void yaffs_GutsTest(yaffs_Device *dev);
+ 
+ /* A few useful functions */
+-void yaffs_InitialiseTags(yaffs_ExtendedTags * tags);
+-void yaffs_DeleteChunk(yaffs_Device * dev, int chunkId, int markNAND, int lyn);
+-int yaffs_CheckFF(__u8 * buffer, int nBytes);
++void yaffs_InitialiseTags(yaffs_ExtendedTags *tags);
++void yaffs_DeleteChunk(yaffs_Device *dev, int chunkId, int markNAND, int lyn);
++int yaffs_CheckFF(__u8 *buffer, int nBytes);
+ void yaffs_HandleChunkError(yaffs_Device *dev, yaffs_BlockInfo *bi);
+ 
++__u8 *yaffs_GetTempBuffer(yaffs_Device *dev, int lineNo);
++void yaffs_ReleaseTempBuffer(yaffs_Device *dev, __u8 *buffer, int lineNo);
++
+ #endif
+--- a/fs/yaffs2/yaffs_mtdif1.c
++++ b/fs/yaffs2/yaffs_mtdif1.c
+@@ -26,7 +26,7 @@
+ #include "yportenv.h"
+ #include "yaffs_guts.h"
+ #include "yaffs_packedtags1.h"
+-#include "yaffs_tagscompat.h"	// for yaffs_CalcTagsECC
++#include "yaffs_tagscompat.h"	/* for yaffs_CalcTagsECC */
+ 
+ #include "linux/kernel.h"
+ #include "linux/version.h"
+@@ -34,9 +34,9 @@
+ #include "linux/mtd/mtd.h"
+ 
+ /* Don't compile this module if we don't have MTD's mtd_oob_ops interface */
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 
+-const char *yaffs_mtdif1_c_version = "$Id: yaffs_mtdif1.c,v 1.3 2007/05/15 20:16:11 ian Exp $";
++const char *yaffs_mtdif1_c_version = "$Id: yaffs_mtdif1.c,v 1.10 2009-03-09 07:41:10 charles Exp $";
+ 
+ #ifndef CONFIG_YAFFS_9BYTE_TAGS
+ # define YTAG1_SIZE 8
+@@ -89,9 +89,9 @@ static struct nand_ecclayout nand_oob_16
+  * Returns YAFFS_OK or YAFFS_FAIL.
+  */
+ int nandmtd1_WriteChunkWithTagsToNAND(yaffs_Device *dev,
+-	int chunkInNAND, const __u8 * data, const yaffs_ExtendedTags * etags)
++	int chunkInNAND, const __u8 *data, const yaffs_ExtendedTags *etags)
+ {
+-	struct mtd_info * mtd = dev->genericDevice;
++	struct mtd_info *mtd = dev->genericDevice;
+ 	int chunkBytes = dev->nDataBytesPerChunk;
+ 	loff_t addr = ((loff_t)chunkInNAND) * chunkBytes;
+ 	struct mtd_oob_ops ops;
+@@ -146,7 +146,7 @@ int nandmtd1_WriteChunkWithTagsToNAND(ya
+ 
+ /* Return with empty ExtendedTags but add eccResult.
+  */
+-static int rettags(yaffs_ExtendedTags * etags, int eccResult, int retval)
++static int rettags(yaffs_ExtendedTags *etags, int eccResult, int retval)
+ {
+ 	if (etags) {
+ 		memset(etags, 0, sizeof(*etags));
+@@ -169,9 +169,9 @@ static int rettags(yaffs_ExtendedTags * 
+  * Returns YAFFS_OK or YAFFS_FAIL.
+  */
+ int nandmtd1_ReadChunkWithTagsFromNAND(yaffs_Device *dev,
+-	int chunkInNAND, __u8 * data, yaffs_ExtendedTags * etags)
++	int chunkInNAND, __u8 *data, yaffs_ExtendedTags *etags)
+ {
+-	struct mtd_info * mtd = dev->genericDevice;
++	struct mtd_info *mtd = dev->genericDevice;
+ 	int chunkBytes = dev->nDataBytesPerChunk;
+ 	loff_t addr = ((loff_t)chunkInNAND) * chunkBytes;
+ 	int eccres = YAFFS_ECC_RESULT_NO_ERROR;
+@@ -189,7 +189,7 @@ int nandmtd1_ReadChunkWithTagsFromNAND(y
+ 	ops.datbuf = data;
+ 	ops.oobbuf = (__u8 *)&pt1;
+ 
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20))
++#if (MTD_VERSION_CODE < MTD_VERSION(2, 6, 20))
+ 	/* In MTD 2.6.18 to 2.6.19 nand_base.c:nand_do_read_oob() has a bug;
+ 	 * help it out with ops.len = ops.ooblen when ops.datbuf == NULL.
+ 	 */
+@@ -284,11 +284,11 @@ int nandmtd1_ReadChunkWithTagsFromNAND(y
+  */
+ int nandmtd1_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo)
+ {
+-	struct mtd_info * mtd = dev->genericDevice;
++	struct mtd_info *mtd = dev->genericDevice;
+ 	int blocksize = dev->nChunksPerBlock * dev->nDataBytesPerChunk;
+ 	int retval;
+ 
+-	yaffs_trace(YAFFS_TRACE_BAD_BLOCKS, "marking block %d bad", blockNo);
++	yaffs_trace(YAFFS_TRACE_BAD_BLOCKS, "marking block %d bad\n", blockNo);
+ 
+ 	retval = mtd->block_markbad(mtd, (loff_t)blocksize * blockNo);
+ 	return (retval) ? YAFFS_FAIL : YAFFS_OK;
+@@ -298,7 +298,7 @@ int nandmtd1_MarkNANDBlockBad(struct yaf
+  *
+  * Returns YAFFS_OK or YAFFS_FAIL.
+  */
+-static int nandmtd1_TestPrerequists(struct mtd_info * mtd)
++static int nandmtd1_TestPrerequists(struct mtd_info *mtd)
+ {
+ 	/* 2.6.18 has mtd->ecclayout->oobavail */
+ 	/* 2.6.21 has mtd->ecclayout->oobavail and mtd->oobavail */
+@@ -323,10 +323,11 @@ static int nandmtd1_TestPrerequists(stru
+  * Always returns YAFFS_OK.
+  */
+ int nandmtd1_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+-	yaffs_BlockState * pState, int *pSequenceNumber)
++	yaffs_BlockState *pState, __u32 *pSequenceNumber)
+ {
+-	struct mtd_info * mtd = dev->genericDevice;
++	struct mtd_info *mtd = dev->genericDevice;
+ 	int chunkNo = blockNo * dev->nChunksPerBlock;
++	loff_t addr = (loff_t)chunkNo * dev->nDataBytesPerChunk;
+ 	yaffs_ExtendedTags etags;
+ 	int state = YAFFS_BLOCK_STATE_DEAD;
+ 	int seqnum = 0;
+@@ -335,21 +336,22 @@ int nandmtd1_QueryNANDBlock(struct yaffs
+ 	/* We don't yet have a good place to test for MTD config prerequists.
+ 	 * Do it here as we are called during the initial scan.
+ 	 */
+-	if (nandmtd1_TestPrerequists(mtd) != YAFFS_OK) {
++	if (nandmtd1_TestPrerequists(mtd) != YAFFS_OK)
+ 		return YAFFS_FAIL;
+-	}
+ 
+ 	retval = nandmtd1_ReadChunkWithTagsFromNAND(dev, chunkNo, NULL, &etags);
++	etags.blockBad = (mtd->block_isbad)(mtd, addr);
+ 	if (etags.blockBad) {
+ 		yaffs_trace(YAFFS_TRACE_BAD_BLOCKS,
+-			"block %d is marked bad", blockNo);
++			"block %d is marked bad\n", blockNo);
+ 		state = YAFFS_BLOCK_STATE_DEAD;
+-	}
+-	else if (etags.chunkUsed) {
++	} else if (etags.eccResult != YAFFS_ECC_RESULT_NO_ERROR) {
++		/* bad tags, need to look more closely */
++		state = YAFFS_BLOCK_STATE_NEEDS_SCANNING;
++	} else if (etags.chunkUsed) {
+ 		state = YAFFS_BLOCK_STATE_NEEDS_SCANNING;
+ 		seqnum = etags.sequenceNumber;
+-	}
+-	else {
++	} else {
+ 		state = YAFFS_BLOCK_STATE_EMPTY;
+ 	}
+ 
+@@ -360,4 +362,4 @@ int nandmtd1_QueryNANDBlock(struct yaffs
+ 	return YAFFS_OK;
+ }
+ 
+-#endif /*KERNEL_VERSION*/
++#endif /*MTD_VERSION*/
+--- a/fs/yaffs2/yaffs_mtdif1.h
++++ b/fs/yaffs2/yaffs_mtdif1.h
+@@ -14,15 +14,15 @@
+ #ifndef __YAFFS_MTDIF1_H__
+ #define __YAFFS_MTDIF1_H__
+ 
+-int nandmtd1_WriteChunkWithTagsToNAND(yaffs_Device * dev, int chunkInNAND,
+-	const __u8 * data, const yaffs_ExtendedTags * tags);
++int nandmtd1_WriteChunkWithTagsToNAND(yaffs_Device *dev, int chunkInNAND,
++	const __u8 *data, const yaffs_ExtendedTags *tags);
+ 
+-int nandmtd1_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+-	__u8 * data, yaffs_ExtendedTags * tags);
++int nandmtd1_ReadChunkWithTagsFromNAND(yaffs_Device *dev, int chunkInNAND,
++	__u8 *data, yaffs_ExtendedTags *tags);
+ 
+ int nandmtd1_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo);
+ 
+ int nandmtd1_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+-	yaffs_BlockState * state, int *sequenceNumber);
++	yaffs_BlockState *state, __u32 *sequenceNumber);
+ 
+ #endif
+--- a/fs/yaffs2/yaffs_mtdif2.c
++++ b/fs/yaffs2/yaffs_mtdif2.c
+@@ -14,7 +14,7 @@
+ /* mtd interface for YAFFS2 */
+ 
+ const char *yaffs_mtdif2_c_version =
+-    "$Id: yaffs_mtdif2.c,v 1.17 2007-02-14 01:09:06 wookey Exp $";
++	"$Id: yaffs_mtdif2.c,v 1.23 2009-03-06 17:20:53 wookey Exp $";
+ 
+ #include "yportenv.h"
+ 
+@@ -27,19 +27,23 @@ const char *yaffs_mtdif2_c_version =
+ 
+ #include "yaffs_packedtags2.h"
+ 
+-int nandmtd2_WriteChunkWithTagsToNAND(yaffs_Device * dev, int chunkInNAND,
+-				      const __u8 * data,
+-				      const yaffs_ExtendedTags * tags)
++/* NB For use with inband tags....
++ * We assume that the data buffer is of size totalBytersPerChunk so that we can also
++ * use it to load the tags.
++ */
++int nandmtd2_WriteChunkWithTagsToNAND(yaffs_Device *dev, int chunkInNAND,
++				      const __u8 *data,
++				      const yaffs_ExtendedTags *tags)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	struct mtd_oob_ops ops;
+ #else
+ 	size_t dummy;
+ #endif
+ 	int retval = 0;
+ 
+-	loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
++	loff_t addr;
+ 
+ 	yaffs_PackedTags2 pt;
+ 
+@@ -48,46 +52,40 @@ int nandmtd2_WriteChunkWithTagsToNAND(ya
+ 	   ("nandmtd2_WriteChunkWithTagsToNAND chunk %d data %p tags %p"
+ 	    TENDSTR), chunkInNAND, data, tags));
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-	if (tags)
+-		yaffs_PackTags2(&pt, tags);
+-	else
+-		BUG(); /* both tags and data should always be present */
+ 
+-	if (data) {
+-		ops.mode = MTD_OOB_AUTO;
+-		ops.ooblen = sizeof(pt);
+-		ops.len = dev->nDataBytesPerChunk;
+-		ops.ooboffs = 0;
+-		ops.datbuf = (__u8 *)data;
+-		ops.oobbuf = (void *)&pt;
+-		retval = mtd->write_oob(mtd, addr, &ops);
++	addr  = ((loff_t) chunkInNAND) * dev->totalBytesPerChunk;
++
++	/* For yaffs2 writing there must be both data and tags.
++	 * If we're using inband tags, then the tags are stuffed into
++	 * the end of the data buffer.
++	 */
++	if (!data || !tags)
++		BUG();
++	else if (dev->inbandTags) {
++		yaffs_PackedTags2TagsPart *pt2tp;
++		pt2tp = (yaffs_PackedTags2TagsPart *)(data + dev->nDataBytesPerChunk);
++		yaffs_PackTags2TagsPart(pt2tp, tags);
+ 	} else
+-		BUG(); /* both tags and data should always be present */
+-#else
+-	if (tags) {
+ 		yaffs_PackTags2(&pt, tags);
+-	}
+ 
+-	if (data && tags) {
+-		if (dev->useNANDECC)
+-			retval =
+-			    mtd->write_ecc(mtd, addr, dev->nDataBytesPerChunk,
+-					   &dummy, data, (__u8 *) & pt, NULL);
+-		else
+-			retval =
+-			    mtd->write_ecc(mtd, addr, dev->nDataBytesPerChunk,
+-					   &dummy, data, (__u8 *) & pt, NULL);
+-	} else {
+-		if (data)
+-			retval =
+-			    mtd->write(mtd, addr, dev->nDataBytesPerChunk, &dummy,
+-				       data);
+-		if (tags)
+-			retval =
+-			    mtd->write_oob(mtd, addr, mtd->oobsize, &dummy,
+-					   (__u8 *) & pt);
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
++	ops.mode = MTD_OOB_AUTO;
++	ops.ooblen = (dev->inbandTags) ? 0 : sizeof(pt);
++	ops.len = dev->totalBytesPerChunk;
++	ops.ooboffs = 0;
++	ops.datbuf = (__u8 *)data;
++	ops.oobbuf = (dev->inbandTags) ? NULL : (void *)&pt;
++	retval = mtd->write_oob(mtd, addr, &ops);
+ 
++#else
++	if (!dev->inbandTags) {
++		retval =
++		    mtd->write_ecc(mtd, addr, dev->nDataBytesPerChunk,
++				   &dummy, data, (__u8 *) &pt, NULL);
++	} else {
++		retval =
++		    mtd->write(mtd, addr, dev->totalBytesPerChunk, &dummy,
++			       data);
+ 	}
+ #endif
+ 
+@@ -97,17 +95,18 @@ int nandmtd2_WriteChunkWithTagsToNAND(ya
+ 		return YAFFS_FAIL;
+ }
+ 
+-int nandmtd2_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+-				       __u8 * data, yaffs_ExtendedTags * tags)
++int nandmtd2_ReadChunkWithTagsFromNAND(yaffs_Device *dev, int chunkInNAND,
++				       __u8 *data, yaffs_ExtendedTags *tags)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	struct mtd_oob_ops ops;
+ #endif
+ 	size_t dummy;
+ 	int retval = 0;
++	int localData = 0;
+ 
+-	loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
++	loff_t addr = ((loff_t) chunkInNAND) * dev->totalBytesPerChunk;
+ 
+ 	yaffs_PackedTags2 pt;
+ 
+@@ -116,9 +115,20 @@ int nandmtd2_ReadChunkWithTagsFromNAND(y
+ 	   ("nandmtd2_ReadChunkWithTagsFromNAND chunk %d data %p tags %p"
+ 	    TENDSTR), chunkInNAND, data, tags));
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-	if (data && !tags)
+-		retval = mtd->read(mtd, addr, dev->nDataBytesPerChunk,
++	if (dev->inbandTags) {
++
++		if (!data) {
++			localData = 1;
++			data = yaffs_GetTempBuffer(dev, __LINE__);
++		}
++
++
++	}
++
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
++	if (dev->inbandTags || (data && !tags))
++		retval = mtd->read(mtd, addr, dev->totalBytesPerChunk,
+ 				&dummy, data);
+ 	else if (tags) {
+ 		ops.mode = MTD_OOB_AUTO;
+@@ -130,38 +140,42 @@ int nandmtd2_ReadChunkWithTagsFromNAND(y
+ 		retval = mtd->read_oob(mtd, addr, &ops);
+ 	}
+ #else
+-	if (data && tags) {
+-		if (dev->useNANDECC) {
+-			retval =
+-			    mtd->read_ecc(mtd, addr, dev->nDataBytesPerChunk,
+-					  &dummy, data, dev->spareBuffer,
+-					  NULL);
+-		} else {
+-			retval =
+-			    mtd->read_ecc(mtd, addr, dev->nDataBytesPerChunk,
++	if (!dev->inbandTags && data && tags) {
++
++		retval = mtd->read_ecc(mtd, addr, dev->nDataBytesPerChunk,
+ 					  &dummy, data, dev->spareBuffer,
+ 					  NULL);
+-		}
+ 	} else {
+ 		if (data)
+ 			retval =
+ 			    mtd->read(mtd, addr, dev->nDataBytesPerChunk, &dummy,
+ 				      data);
+-		if (tags)
++		if (!dev->inbandTags && tags)
+ 			retval =
+ 			    mtd->read_oob(mtd, addr, mtd->oobsize, &dummy,
+ 					  dev->spareBuffer);
+ 	}
+ #endif
+ 
+-	memcpy(&pt, dev->spareBuffer, sizeof(pt));
+ 
+-	if (tags)
+-		yaffs_UnpackTags2(tags, &pt);
++	if (dev->inbandTags) {
++		if (tags) {
++			yaffs_PackedTags2TagsPart *pt2tp;
++			pt2tp = (yaffs_PackedTags2TagsPart *)&data[dev->nDataBytesPerChunk];
++			yaffs_UnpackTags2TagsPart(tags, pt2tp);
++		}
++	} else {
++		if (tags) {
++			memcpy(&pt, dev->spareBuffer, sizeof(pt));
++			yaffs_UnpackTags2(tags, &pt);
++		}
++	}
+ 
+-	if(tags && retval == -EBADMSG && tags->eccResult == YAFFS_ECC_RESULT_NO_ERROR)
+-		tags->eccResult = YAFFS_ECC_RESULT_UNFIXED;
++	if (localData)
++		yaffs_ReleaseTempBuffer(dev, data, __LINE__);
+ 
++	if (tags && retval == -EBADMSG && tags->eccResult == YAFFS_ECC_RESULT_NO_ERROR)
++		tags->eccResult = YAFFS_ECC_RESULT_UNFIXED;
+ 	if (retval == 0)
+ 		return YAFFS_OK;
+ 	else
+@@ -178,7 +192,7 @@ int nandmtd2_MarkNANDBlockBad(struct yaf
+ 	retval =
+ 	    mtd->block_markbad(mtd,
+ 			       blockNo * dev->nChunksPerBlock *
+-			       dev->nDataBytesPerChunk);
++			       dev->totalBytesPerChunk);
+ 
+ 	if (retval == 0)
+ 		return YAFFS_OK;
+@@ -188,7 +202,7 @@ int nandmtd2_MarkNANDBlockBad(struct yaf
+ }
+ 
+ int nandmtd2_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+-			    yaffs_BlockState * state, int *sequenceNumber)
++			    yaffs_BlockState *state, __u32 *sequenceNumber)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+ 	int retval;
+@@ -198,7 +212,7 @@ int nandmtd2_QueryNANDBlock(struct yaffs
+ 	retval =
+ 	    mtd->block_isbad(mtd,
+ 			     blockNo * dev->nChunksPerBlock *
+-			     dev->nDataBytesPerChunk);
++			     dev->totalBytesPerChunk);
+ 
+ 	if (retval) {
+ 		T(YAFFS_TRACE_MTD, (TSTR("block is bad" TENDSTR)));
+--- a/fs/yaffs2/yaffs_mtdif2.h
++++ b/fs/yaffs2/yaffs_mtdif2.h
+@@ -17,13 +17,13 @@
+ #define __YAFFS_MTDIF2_H__
+ 
+ #include "yaffs_guts.h"
+-int nandmtd2_WriteChunkWithTagsToNAND(yaffs_Device * dev, int chunkInNAND,
+-				      const __u8 * data,
+-				      const yaffs_ExtendedTags * tags);
+-int nandmtd2_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+-				       __u8 * data, yaffs_ExtendedTags * tags);
++int nandmtd2_WriteChunkWithTagsToNAND(yaffs_Device *dev, int chunkInNAND,
++				const __u8 *data,
++				const yaffs_ExtendedTags *tags);
++int nandmtd2_ReadChunkWithTagsFromNAND(yaffs_Device *dev, int chunkInNAND,
++				__u8 *data, yaffs_ExtendedTags *tags);
+ int nandmtd2_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo);
+ int nandmtd2_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+-			    yaffs_BlockState * state, int *sequenceNumber);
++			yaffs_BlockState *state, __u32 *sequenceNumber);
+ 
+ #endif
+--- a/fs/yaffs2/yaffs_mtdif.c
++++ b/fs/yaffs2/yaffs_mtdif.c
+@@ -12,7 +12,7 @@
+  */
+ 
+ const char *yaffs_mtdif_c_version =
+-    "$Id: yaffs_mtdif.c,v 1.19 2007-02-14 01:09:06 wookey Exp $";
++	"$Id: yaffs_mtdif.c,v 1.22 2009-03-06 17:20:51 wookey Exp $";
+ 
+ #include "yportenv.h"
+ 
+@@ -24,7 +24,7 @@ const char *yaffs_mtdif_c_version =
+ #include "linux/time.h"
+ #include "linux/mtd/nand.h"
+ 
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18))
++#if (MTD_VERSION_CODE < MTD_VERSION(2, 6, 18))
+ static struct nand_oobinfo yaffs_oobinfo = {
+ 	.useecc = 1,
+ 	.eccbytes = 6,
+@@ -36,7 +36,7 @@ static struct nand_oobinfo yaffs_noeccin
+ };
+ #endif
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ static inline void translate_spare2oob(const yaffs_Spare *spare, __u8 *oob)
+ {
+ 	oob[0] = spare->tagByte0;
+@@ -45,8 +45,8 @@ static inline void translate_spare2oob(c
+ 	oob[3] = spare->tagByte3;
+ 	oob[4] = spare->tagByte4;
+ 	oob[5] = spare->tagByte5 & 0x3f;
+-	oob[5] |= spare->blockStatus == 'Y' ? 0: 0x80;
+-	oob[5] |= spare->pageStatus == 0 ? 0: 0x40;
++	oob[5] |= spare->blockStatus == 'Y' ? 0 : 0x80;
++	oob[5] |= spare->pageStatus == 0 ? 0 : 0x40;
+ 	oob[6] = spare->tagByte6;
+ 	oob[7] = spare->tagByte7;
+ }
+@@ -71,18 +71,18 @@ static inline void translate_oob2spare(y
+ }
+ #endif
+ 
+-int nandmtd_WriteChunkToNAND(yaffs_Device * dev, int chunkInNAND,
+-			     const __u8 * data, const yaffs_Spare * spare)
++int nandmtd_WriteChunkToNAND(yaffs_Device *dev, int chunkInNAND,
++			     const __u8 *data, const yaffs_Spare *spare)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	struct mtd_oob_ops ops;
+ #endif
+ 	size_t dummy;
+ 	int retval = 0;
+ 
+ 	loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	__u8 spareAsBytes[8]; /* OOB */
+ 
+ 	if (data && !spare)
+@@ -135,18 +135,18 @@ int nandmtd_WriteChunkToNAND(yaffs_Devic
+ 		return YAFFS_FAIL;
+ }
+ 
+-int nandmtd_ReadChunkFromNAND(yaffs_Device * dev, int chunkInNAND, __u8 * data,
+-			      yaffs_Spare * spare)
++int nandmtd_ReadChunkFromNAND(yaffs_Device *dev, int chunkInNAND, __u8 *data,
++			      yaffs_Spare *spare)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	struct mtd_oob_ops ops;
+ #endif
+ 	size_t dummy;
+ 	int retval = 0;
+ 
+ 	loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	__u8 spareAsBytes[8]; /* OOB */
+ 
+ 	if (data && !spare)
+@@ -205,7 +205,7 @@ int nandmtd_ReadChunkFromNAND(yaffs_Devi
+ 		return YAFFS_FAIL;
+ }
+ 
+-int nandmtd_EraseBlockInNAND(yaffs_Device * dev, int blockNumber)
++int nandmtd_EraseBlockInNAND(yaffs_Device *dev, int blockNumber)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+ 	__u32 addr =
+@@ -234,7 +234,7 @@ int nandmtd_EraseBlockInNAND(yaffs_Devic
+ 		return YAFFS_FAIL;
+ }
+ 
+-int nandmtd_InitialiseNAND(yaffs_Device * dev)
++int nandmtd_InitialiseNAND(yaffs_Device *dev)
+ {
+ 	return YAFFS_OK;
+ }
+--- a/fs/yaffs2/yaffs_mtdif.h
++++ b/fs/yaffs2/yaffs_mtdif.h
+@@ -18,10 +18,15 @@
+ 
+ #include "yaffs_guts.h"
+ 
+-int nandmtd_WriteChunkToNAND(yaffs_Device * dev, int chunkInNAND,
+-			     const __u8 * data, const yaffs_Spare * spare);
+-int nandmtd_ReadChunkFromNAND(yaffs_Device * dev, int chunkInNAND, __u8 * data,
+-			      yaffs_Spare * spare);
+-int nandmtd_EraseBlockInNAND(yaffs_Device * dev, int blockNumber);
+-int nandmtd_InitialiseNAND(yaffs_Device * dev);
++#if (MTD_VERSION_CODE < MTD_VERSION(2, 6, 18))
++extern struct nand_oobinfo yaffs_oobinfo;
++extern struct nand_oobinfo yaffs_noeccinfo;
++#endif
++
++int nandmtd_WriteChunkToNAND(yaffs_Device *dev, int chunkInNAND,
++			const __u8 *data, const yaffs_Spare *spare);
++int nandmtd_ReadChunkFromNAND(yaffs_Device *dev, int chunkInNAND, __u8 *data,
++			yaffs_Spare *spare);
++int nandmtd_EraseBlockInNAND(yaffs_Device *dev, int blockNumber);
++int nandmtd_InitialiseNAND(yaffs_Device *dev);
+ #endif
+--- a/fs/yaffs2/yaffs_nand.c
++++ b/fs/yaffs2/yaffs_nand.c
+@@ -12,16 +12,17 @@
+  */
+ 
+ const char *yaffs_nand_c_version =
+-    "$Id: yaffs_nand.c,v 1.7 2007-02-14 01:09:06 wookey Exp $";
++	"$Id: yaffs_nand.c,v 1.10 2009-03-06 17:20:54 wookey Exp $";
+ 
+ #include "yaffs_nand.h"
+ #include "yaffs_tagscompat.h"
+ #include "yaffs_tagsvalidity.h"
+ 
++#include "yaffs_getblockinfo.h"
+ 
+-int yaffs_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+-					   __u8 * buffer,
+-					   yaffs_ExtendedTags * tags)
++int yaffs_ReadChunkWithTagsFromNAND(yaffs_Device *dev, int chunkInNAND,
++					   __u8 *buffer,
++					   yaffs_ExtendedTags *tags)
+ {
+ 	int result;
+ 	yaffs_ExtendedTags localTags;
+@@ -29,7 +30,7 @@ int yaffs_ReadChunkWithTagsFromNAND(yaff
+ 	int realignedChunkInNAND = chunkInNAND - dev->chunkOffset;
+ 
+ 	/* If there are no tags provided, use local tags to get prioritised gc working */
+-	if(!tags)
++	if (!tags)
+ 		tags = &localTags;
+ 
+ 	if (dev->readChunkWithTagsFromNAND)
+@@ -40,20 +41,20 @@ int yaffs_ReadChunkWithTagsFromNAND(yaff
+ 									realignedChunkInNAND,
+ 									buffer,
+ 									tags);
+-	if(tags &&
+-	   tags->eccResult > YAFFS_ECC_RESULT_NO_ERROR){
++	if (tags &&
++	   tags->eccResult > YAFFS_ECC_RESULT_NO_ERROR) {
+ 
+ 		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, chunkInNAND/dev->nChunksPerBlock);
+-                yaffs_HandleChunkError(dev,bi);
++		yaffs_HandleChunkError(dev, bi);
+ 	}
+ 
+ 	return result;
+ }
+ 
+-int yaffs_WriteChunkWithTagsToNAND(yaffs_Device * dev,
++int yaffs_WriteChunkWithTagsToNAND(yaffs_Device *dev,
+ 						   int chunkInNAND,
+-						   const __u8 * buffer,
+-						   yaffs_ExtendedTags * tags)
++						   const __u8 *buffer,
++						   yaffs_ExtendedTags *tags)
+ {
+ 	chunkInNAND -= dev->chunkOffset;
+ 
+@@ -84,7 +85,7 @@ int yaffs_WriteChunkWithTagsToNAND(yaffs
+ 								       tags);
+ }
+ 
+-int yaffs_MarkBlockBad(yaffs_Device * dev, int blockNo)
++int yaffs_MarkBlockBad(yaffs_Device *dev, int blockNo)
+ {
+ 	blockNo -= dev->blockOffset;
+ 
+@@ -95,10 +96,10 @@ int yaffs_MarkBlockBad(yaffs_Device * de
+ 		return yaffs_TagsCompatabilityMarkNANDBlockBad(dev, blockNo);
+ }
+ 
+-int yaffs_QueryInitialBlockState(yaffs_Device * dev,
++int yaffs_QueryInitialBlockState(yaffs_Device *dev,
+ 						 int blockNo,
+-						 yaffs_BlockState * state,
+-						 unsigned *sequenceNumber)
++						 yaffs_BlockState *state,
++						 __u32 *sequenceNumber)
+ {
+ 	blockNo -= dev->blockOffset;
+ 
+--- a/fs/yaffs2/yaffs_nandemul2k.h
++++ b/fs/yaffs2/yaffs_nandemul2k.h
+@@ -21,14 +21,14 @@
+ #include "yaffs_guts.h"
+ 
+ int nandemul2k_WriteChunkWithTagsToNAND(struct yaffs_DeviceStruct *dev,
+-					int chunkInNAND, const __u8 * data,
+-					yaffs_ExtendedTags * tags);
++					int chunkInNAND, const __u8 *data,
++					const yaffs_ExtendedTags *tags);
+ int nandemul2k_ReadChunkWithTagsFromNAND(struct yaffs_DeviceStruct *dev,
+-					 int chunkInNAND, __u8 * data,
+-					 yaffs_ExtendedTags * tags);
++					 int chunkInNAND, __u8 *data,
++					 yaffs_ExtendedTags *tags);
+ int nandemul2k_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo);
+ int nandemul2k_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+-			      yaffs_BlockState * state, int *sequenceNumber);
++			      yaffs_BlockState *state, __u32 *sequenceNumber);
+ int nandemul2k_EraseBlockInNAND(struct yaffs_DeviceStruct *dev,
+ 				int blockInNAND);
+ int nandemul2k_InitialiseNAND(struct yaffs_DeviceStruct *dev);
+--- a/fs/yaffs2/yaffs_nand.h
++++ b/fs/yaffs2/yaffs_nand.h
+@@ -19,21 +19,21 @@
+ 
+ 
+ 
+-int yaffs_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+-					   __u8 * buffer,
+-					   yaffs_ExtendedTags * tags);
+-
+-int yaffs_WriteChunkWithTagsToNAND(yaffs_Device * dev,
+-						   int chunkInNAND,
+-						   const __u8 * buffer,
+-						   yaffs_ExtendedTags * tags);
+-
+-int yaffs_MarkBlockBad(yaffs_Device * dev, int blockNo);
+-
+-int yaffs_QueryInitialBlockState(yaffs_Device * dev,
+-						 int blockNo,
+-						 yaffs_BlockState * state,
+-						 unsigned *sequenceNumber);
++int yaffs_ReadChunkWithTagsFromNAND(yaffs_Device *dev, int chunkInNAND,
++					__u8 *buffer,
++					yaffs_ExtendedTags *tags);
++
++int yaffs_WriteChunkWithTagsToNAND(yaffs_Device *dev,
++						int chunkInNAND,
++						const __u8 *buffer,
++						yaffs_ExtendedTags *tags);
++
++int yaffs_MarkBlockBad(yaffs_Device *dev, int blockNo);
++
++int yaffs_QueryInitialBlockState(yaffs_Device *dev,
++						int blockNo,
++						yaffs_BlockState *state,
++						unsigned *sequenceNumber);
+ 
+ int yaffs_EraseBlockInNAND(struct yaffs_DeviceStruct *dev,
+ 				  int blockInNAND);
+--- a/fs/yaffs2/yaffs_packedtags1.c
++++ b/fs/yaffs2/yaffs_packedtags1.c
+@@ -14,7 +14,7 @@
+ #include "yaffs_packedtags1.h"
+ #include "yportenv.h"
+ 
+-void yaffs_PackTags1(yaffs_PackedTags1 * pt, const yaffs_ExtendedTags * t)
++void yaffs_PackTags1(yaffs_PackedTags1 *pt, const yaffs_ExtendedTags *t)
+ {
+ 	pt->chunkId = t->chunkId;
+ 	pt->serialNumber = t->serialNumber;
+@@ -27,7 +27,7 @@ void yaffs_PackTags1(yaffs_PackedTags1 *
+ 
+ }
+ 
+-void yaffs_UnpackTags1(yaffs_ExtendedTags * t, const yaffs_PackedTags1 * pt)
++void yaffs_UnpackTags1(yaffs_ExtendedTags *t, const yaffs_PackedTags1 *pt)
+ {
+ 	static const __u8 allFF[] =
+ 	    { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+@@ -35,9 +35,8 @@ void yaffs_UnpackTags1(yaffs_ExtendedTag
+ 
+ 	if (memcmp(allFF, pt, sizeof(yaffs_PackedTags1))) {
+ 		t->blockBad = 0;
+-		if (pt->shouldBeFF != 0xFFFFFFFF) {
++		if (pt->shouldBeFF != 0xFFFFFFFF)
+ 			t->blockBad = 1;
+-		}
+ 		t->chunkUsed = 1;
+ 		t->objectId = pt->objectId;
+ 		t->chunkId = pt->chunkId;
+@@ -47,6 +46,5 @@ void yaffs_UnpackTags1(yaffs_ExtendedTag
+ 		t->serialNumber = pt->serialNumber;
+ 	} else {
+ 		memset(t, 0, sizeof(yaffs_ExtendedTags));
+-
+ 	}
+ }
+--- a/fs/yaffs2/yaffs_packedtags1.h
++++ b/fs/yaffs2/yaffs_packedtags1.h
+@@ -32,6 +32,6 @@ typedef struct {
+ 
+ } yaffs_PackedTags1;
+ 
+-void yaffs_PackTags1(yaffs_PackedTags1 * pt, const yaffs_ExtendedTags * t);
+-void yaffs_UnpackTags1(yaffs_ExtendedTags * t, const yaffs_PackedTags1 * pt);
++void yaffs_PackTags1(yaffs_PackedTags1 *pt, const yaffs_ExtendedTags *t);
++void yaffs_UnpackTags1(yaffs_ExtendedTags *t, const yaffs_PackedTags1 *pt);
+ #endif
+--- a/fs/yaffs2/yaffs_packedtags2.c
++++ b/fs/yaffs2/yaffs_packedtags2.c
+@@ -37,60 +37,68 @@
+ #define EXTRA_OBJECT_TYPE_SHIFT (28)
+ #define EXTRA_OBJECT_TYPE_MASK  ((0x0F) << EXTRA_OBJECT_TYPE_SHIFT)
+ 
+-static void yaffs_DumpPackedTags2(const yaffs_PackedTags2 * pt)
++
++static void yaffs_DumpPackedTags2TagsPart(const yaffs_PackedTags2TagsPart *ptt)
+ {
+ 	T(YAFFS_TRACE_MTD,
+ 	  (TSTR("packed tags obj %d chunk %d byte %d seq %d" TENDSTR),
+-	   pt->t.objectId, pt->t.chunkId, pt->t.byteCount,
+-	   pt->t.sequenceNumber));
++	   ptt->objectId, ptt->chunkId, ptt->byteCount,
++	   ptt->sequenceNumber));
++}
++static void yaffs_DumpPackedTags2(const yaffs_PackedTags2 *pt)
++{
++	yaffs_DumpPackedTags2TagsPart(&pt->t);
+ }
+ 
+-static void yaffs_DumpTags2(const yaffs_ExtendedTags * t)
++static void yaffs_DumpTags2(const yaffs_ExtendedTags *t)
+ {
+ 	T(YAFFS_TRACE_MTD,
+ 	  (TSTR
+-	   ("ext.tags eccres %d blkbad %d chused %d obj %d chunk%d byte "
+-	    "%d del %d ser %d seq %d"
++	   ("ext.tags eccres %d blkbad %d chused %d obj %d chunk%d byte %d del %d ser %d seq %d"
+ 	    TENDSTR), t->eccResult, t->blockBad, t->chunkUsed, t->objectId,
+ 	   t->chunkId, t->byteCount, t->chunkDeleted, t->serialNumber,
+ 	   t->sequenceNumber));
+ 
+ }
+ 
+-void yaffs_PackTags2(yaffs_PackedTags2 * pt, const yaffs_ExtendedTags * t)
++void yaffs_PackTags2TagsPart(yaffs_PackedTags2TagsPart *ptt,
++		const yaffs_ExtendedTags *t)
+ {
+-	pt->t.chunkId = t->chunkId;
+-	pt->t.sequenceNumber = t->sequenceNumber;
+-	pt->t.byteCount = t->byteCount;
+-	pt->t.objectId = t->objectId;
++	ptt->chunkId = t->chunkId;
++	ptt->sequenceNumber = t->sequenceNumber;
++	ptt->byteCount = t->byteCount;
++	ptt->objectId = t->objectId;
+ 
+ 	if (t->chunkId == 0 && t->extraHeaderInfoAvailable) {
+ 		/* Store the extra header info instead */
+ 		/* We save the parent object in the chunkId */
+-		pt->t.chunkId = EXTRA_HEADER_INFO_FLAG
++		ptt->chunkId = EXTRA_HEADER_INFO_FLAG
+ 			| t->extraParentObjectId;
+-		if (t->extraIsShrinkHeader) {
+-			pt->t.chunkId |= EXTRA_SHRINK_FLAG;
+-		}
+-		if (t->extraShadows) {
+-			pt->t.chunkId |= EXTRA_SHADOWS_FLAG;
+-		}
++		if (t->extraIsShrinkHeader)
++			ptt->chunkId |= EXTRA_SHRINK_FLAG;
++		if (t->extraShadows)
++			ptt->chunkId |= EXTRA_SHADOWS_FLAG;
+ 
+-		pt->t.objectId &= ~EXTRA_OBJECT_TYPE_MASK;
+-		pt->t.objectId |=
++		ptt->objectId &= ~EXTRA_OBJECT_TYPE_MASK;
++		ptt->objectId |=
+ 		    (t->extraObjectType << EXTRA_OBJECT_TYPE_SHIFT);
+ 
+-		if (t->extraObjectType == YAFFS_OBJECT_TYPE_HARDLINK) {
+-			pt->t.byteCount = t->extraEquivalentObjectId;
+-		} else if (t->extraObjectType == YAFFS_OBJECT_TYPE_FILE) {
+-			pt->t.byteCount = t->extraFileLength;
+-		} else {
+-			pt->t.byteCount = 0;
+-		}
++		if (t->extraObjectType == YAFFS_OBJECT_TYPE_HARDLINK)
++			ptt->byteCount = t->extraEquivalentObjectId;
++		else if (t->extraObjectType == YAFFS_OBJECT_TYPE_FILE)
++			ptt->byteCount = t->extraFileLength;
++		else
++			ptt->byteCount = 0;
+ 	}
+ 
+-	yaffs_DumpPackedTags2(pt);
++	yaffs_DumpPackedTags2TagsPart(ptt);
+ 	yaffs_DumpTags2(t);
++}
++
++
++void yaffs_PackTags2(yaffs_PackedTags2 *pt, const yaffs_ExtendedTags *t)
++{
++	yaffs_PackTags2TagsPart(&pt->t, t);
+ 
+ #ifndef YAFFS_IGNORE_TAGS_ECC
+ 	{
+@@ -101,82 +109,98 @@ void yaffs_PackTags2(yaffs_PackedTags2 *
+ #endif
+ }
+ 
+-void yaffs_UnpackTags2(yaffs_ExtendedTags * t, yaffs_PackedTags2 * pt)
++
++void yaffs_UnpackTags2TagsPart(yaffs_ExtendedTags *t,
++		yaffs_PackedTags2TagsPart *ptt)
+ {
+ 
+ 	memset(t, 0, sizeof(yaffs_ExtendedTags));
+ 
+ 	yaffs_InitialiseTags(t);
+ 
+-	if (pt->t.sequenceNumber != 0xFFFFFFFF) {
+-		/* Page is in use */
+-#ifdef YAFFS_IGNORE_TAGS_ECC
+-		{
+-			t->eccResult = YAFFS_ECC_RESULT_NO_ERROR;
+-		}
+-#else
+-		{
+-			yaffs_ECCOther ecc;
+-			int result;
+-			yaffs_ECCCalculateOther((unsigned char *)&pt->t,
+-						sizeof
+-						(yaffs_PackedTags2TagsPart),
+-						&ecc);
+-			result =
+-			    yaffs_ECCCorrectOther((unsigned char *)&pt->t,
+-						  sizeof
+-						  (yaffs_PackedTags2TagsPart),
+-						  &pt->ecc, &ecc);
+-			switch(result){
+-				case 0:
+-					t->eccResult = YAFFS_ECC_RESULT_NO_ERROR;
+-					break;
+-				case 1:
+-					t->eccResult = YAFFS_ECC_RESULT_FIXED;
+-					break;
+-				case -1:
+-					t->eccResult = YAFFS_ECC_RESULT_UNFIXED;
+-					break;
+-				default:
+-					t->eccResult = YAFFS_ECC_RESULT_UNKNOWN;
+-			}
+-		}
+-#endif
++	if (ptt->sequenceNumber != 0xFFFFFFFF) {
+ 		t->blockBad = 0;
+ 		t->chunkUsed = 1;
+-		t->objectId = pt->t.objectId;
+-		t->chunkId = pt->t.chunkId;
+-		t->byteCount = pt->t.byteCount;
++		t->objectId = ptt->objectId;
++		t->chunkId = ptt->chunkId;
++		t->byteCount = ptt->byteCount;
+ 		t->chunkDeleted = 0;
+ 		t->serialNumber = 0;
+-		t->sequenceNumber = pt->t.sequenceNumber;
++		t->sequenceNumber = ptt->sequenceNumber;
+ 
+ 		/* Do extra header info stuff */
+ 
+-		if (pt->t.chunkId & EXTRA_HEADER_INFO_FLAG) {
++		if (ptt->chunkId & EXTRA_HEADER_INFO_FLAG) {
+ 			t->chunkId = 0;
+ 			t->byteCount = 0;
+ 
+ 			t->extraHeaderInfoAvailable = 1;
+ 			t->extraParentObjectId =
+-			    pt->t.chunkId & (~(ALL_EXTRA_FLAGS));
++			    ptt->chunkId & (~(ALL_EXTRA_FLAGS));
+ 			t->extraIsShrinkHeader =
+-			    (pt->t.chunkId & EXTRA_SHRINK_FLAG) ? 1 : 0;
++			    (ptt->chunkId & EXTRA_SHRINK_FLAG) ? 1 : 0;
+ 			t->extraShadows =
+-			    (pt->t.chunkId & EXTRA_SHADOWS_FLAG) ? 1 : 0;
++			    (ptt->chunkId & EXTRA_SHADOWS_FLAG) ? 1 : 0;
+ 			t->extraObjectType =
+-			    pt->t.objectId >> EXTRA_OBJECT_TYPE_SHIFT;
++			    ptt->objectId >> EXTRA_OBJECT_TYPE_SHIFT;
+ 			t->objectId &= ~EXTRA_OBJECT_TYPE_MASK;
+ 
+-			if (t->extraObjectType == YAFFS_OBJECT_TYPE_HARDLINK) {
+-				t->extraEquivalentObjectId = pt->t.byteCount;
+-			} else {
+-				t->extraFileLength = pt->t.byteCount;
++			if (t->extraObjectType == YAFFS_OBJECT_TYPE_HARDLINK)
++				t->extraEquivalentObjectId = ptt->byteCount;
++			else
++				t->extraFileLength = ptt->byteCount;
++		}
++	}
++
++	yaffs_DumpPackedTags2TagsPart(ptt);
++	yaffs_DumpTags2(t);
++
++}
++
++
++void yaffs_UnpackTags2(yaffs_ExtendedTags *t, yaffs_PackedTags2 *pt)
++{
++
++	yaffs_ECCResult eccResult = YAFFS_ECC_RESULT_NO_ERROR;
++
++	if (pt->t.sequenceNumber != 0xFFFFFFFF) {
++		/* Page is in use */
++#ifndef YAFFS_IGNORE_TAGS_ECC
++		{
++			yaffs_ECCOther ecc;
++			int result;
++			yaffs_ECCCalculateOther((unsigned char *)&pt->t,
++						sizeof
++						(yaffs_PackedTags2TagsPart),
++						&ecc);
++			result =
++			    yaffs_ECCCorrectOther((unsigned char *)&pt->t,
++						  sizeof
++						  (yaffs_PackedTags2TagsPart),
++						  &pt->ecc, &ecc);
++			switch (result) {
++			case 0:
++				eccResult = YAFFS_ECC_RESULT_NO_ERROR;
++				break;
++			case 1:
++				eccResult = YAFFS_ECC_RESULT_FIXED;
++				break;
++			case -1:
++				eccResult = YAFFS_ECC_RESULT_UNFIXED;
++				break;
++			default:
++				eccResult = YAFFS_ECC_RESULT_UNKNOWN;
+ 			}
+ 		}
++#endif
+ 	}
+ 
++	yaffs_UnpackTags2TagsPart(t, &pt->t);
++
++	t->eccResult = eccResult;
++
+ 	yaffs_DumpPackedTags2(pt);
+ 	yaffs_DumpTags2(t);
+ 
+ }
++
+--- a/fs/yaffs2/yaffs_packedtags2.h
++++ b/fs/yaffs2/yaffs_packedtags2.h
+@@ -33,6 +33,11 @@ typedef struct {
+ 	yaffs_ECCOther ecc;
+ } yaffs_PackedTags2;
+ 
+-void yaffs_PackTags2(yaffs_PackedTags2 * pt, const yaffs_ExtendedTags * t);
+-void yaffs_UnpackTags2(yaffs_ExtendedTags * t, yaffs_PackedTags2 * pt);
++/* Full packed tags with ECC, used for oob tags */
++void yaffs_PackTags2(yaffs_PackedTags2 *pt, const yaffs_ExtendedTags *t);
++void yaffs_UnpackTags2(yaffs_ExtendedTags *t, yaffs_PackedTags2 *pt);
++
++/* Only the tags part (no ECC for use with inband tags */
++void yaffs_PackTags2TagsPart(yaffs_PackedTags2TagsPart *pt, const yaffs_ExtendedTags *t);
++void yaffs_UnpackTags2TagsPart(yaffs_ExtendedTags *t, yaffs_PackedTags2TagsPart *pt);
+ #endif
+--- a/fs/yaffs2/yaffs_qsort.c
++++ b/fs/yaffs2/yaffs_qsort.c
+@@ -28,12 +28,12 @@
+  */
+ 
+ #include "yportenv.h"
+-//#include <linux/string.h>
++/* #include <linux/string.h> */
+ 
+ /*
+  * Qsort routine from Bentley & McIlroy's "Engineering a Sort Function".
+  */
+-#define swapcode(TYPE, parmi, parmj, n) { 		\
++#define swapcode(TYPE, parmi, parmj, n) do { 		\
+ 	long i = (n) / sizeof (TYPE); 			\
+ 	register TYPE *pi = (TYPE *) (parmi); 		\
+ 	register TYPE *pj = (TYPE *) (parmj); 		\
+@@ -41,28 +41,29 @@
+ 		register TYPE	t = *pi;		\
+ 		*pi++ = *pj;				\
+ 		*pj++ = t;				\
+-        } while (--i > 0);				\
+-}
++	} while (--i > 0);				\
++} while (0)
+ 
+ #define SWAPINIT(a, es) swaptype = ((char *)a - (char *)0) % sizeof(long) || \
+-	es % sizeof(long) ? 2 : es == sizeof(long)? 0 : 1;
++	es % sizeof(long) ? 2 : es == sizeof(long) ? 0 : 1;
+ 
+ static __inline void
+ swapfunc(char *a, char *b, int n, int swaptype)
+ {
+ 	if (swaptype <= 1)
+-		swapcode(long, a, b, n)
++		swapcode(long, a, b, n);
+ 	else
+-		swapcode(char, a, b, n)
++		swapcode(char, a, b, n);
+ }
+ 
+-#define swap(a, b)					\
++#define yswap(a, b) do {					\
+ 	if (swaptype == 0) {				\
+ 		long t = *(long *)(a);			\
+ 		*(long *)(a) = *(long *)(b);		\
+ 		*(long *)(b) = t;			\
+ 	} else						\
+-		swapfunc(a, b, es, swaptype)
++		swapfunc(a, b, es, swaptype);		\
++} while (0)
+ 
+ #define vecswap(a, b, n) 	if ((n) > 0) swapfunc(a, b, n, swaptype)
+ 
+@@ -70,12 +71,12 @@ static __inline char *
+ med3(char *a, char *b, char *c, int (*cmp)(const void *, const void *))
+ {
+ 	return cmp(a, b) < 0 ?
+-	       (cmp(b, c) < 0 ? b : (cmp(a, c) < 0 ? c : a ))
+-              :(cmp(b, c) > 0 ? b : (cmp(a, c) < 0 ? a : c ));
++		(cmp(b, c) < 0 ? b : (cmp(a, c) < 0 ? c : a))
++		: (cmp(b, c) > 0 ? b : (cmp(a, c) < 0 ? a : c));
+ }
+ 
+ #ifndef min
+-#define min(a,b) (((a) < (b)) ? (a) : (b))
++#define min(a, b) (((a) < (b)) ? (a) : (b))
+ #endif
+ 
+ void
+@@ -92,7 +93,7 @@ loop:	SWAPINIT(a, es);
+ 		for (pm = (char *)a + es; pm < (char *) a + n * es; pm += es)
+ 			for (pl = pm; pl > (char *) a && cmp(pl - es, pl) > 0;
+ 			     pl -= es)
+-				swap(pl, pl - es);
++				yswap(pl, pl - es);
+ 		return;
+ 	}
+ 	pm = (char *)a + (n / 2) * es;
+@@ -107,7 +108,7 @@ loop:	SWAPINIT(a, es);
+ 		}
+ 		pm = med3(pl, pm, pn, cmp);
+ 	}
+-	swap(a, pm);
++	yswap(a, pm);
+ 	pa = pb = (char *)a + es;
+ 
+ 	pc = pd = (char *)a + (n - 1) * es;
+@@ -115,7 +116,7 @@ loop:	SWAPINIT(a, es);
+ 		while (pb <= pc && (r = cmp(pb, a)) <= 0) {
+ 			if (r == 0) {
+ 				swap_cnt = 1;
+-				swap(pa, pb);
++				yswap(pa, pb);
+ 				pa += es;
+ 			}
+ 			pb += es;
+@@ -123,14 +124,14 @@ loop:	SWAPINIT(a, es);
+ 		while (pb <= pc && (r = cmp(pc, a)) >= 0) {
+ 			if (r == 0) {
+ 				swap_cnt = 1;
+-				swap(pc, pd);
++				yswap(pc, pd);
+ 				pd -= es;
+ 			}
+ 			pc -= es;
+ 		}
+ 		if (pb > pc)
+ 			break;
+-		swap(pb, pc);
++		yswap(pb, pc);
+ 		swap_cnt = 1;
+ 		pb += es;
+ 		pc -= es;
+@@ -139,7 +140,7 @@ loop:	SWAPINIT(a, es);
+ 		for (pm = (char *) a + es; pm < (char *) a + n * es; pm += es)
+ 			for (pl = pm; pl > (char *) a && cmp(pl - es, pl) > 0;
+ 			     pl -= es)
+-				swap(pl, pl - es);
++				yswap(pl, pl - es);
+ 		return;
+ 	}
+ 
+@@ -148,9 +149,11 @@ loop:	SWAPINIT(a, es);
+ 	vecswap(a, pb - r, r);
+ 	r = min((long)(pd - pc), (long)(pn - pd - es));
+ 	vecswap(pb, pn - r, r);
+-	if ((r = pb - pa) > es)
++	r = pb - pa;
++	if (r > es)
+ 		yaffs_qsort(a, r / es, es, cmp);
+-	if ((r = pd - pc) > es) {
++	r = pd - pc;
++	if (r > es) {
+ 		/* Iterate rather than recurse to save stack space */
+ 		a = pn - r;
+ 		n = r / es;
+--- a/fs/yaffs2/yaffs_qsort.h
++++ b/fs/yaffs2/yaffs_qsort.h
+@@ -17,7 +17,7 @@
+ #ifndef __YAFFS_QSORT_H__
+ #define __YAFFS_QSORT_H__
+ 
+-extern void yaffs_qsort (void *const base, size_t total_elems, size_t size,
+-                   int (*cmp)(const void *, const void *));
++extern void yaffs_qsort(void *const base, size_t total_elems, size_t size,
++			int (*cmp)(const void *, const void *));
+ 
+ #endif
+--- a/fs/yaffs2/yaffs_tagscompat.c
++++ b/fs/yaffs2/yaffs_tagscompat.c
+@@ -14,16 +14,17 @@
+ #include "yaffs_guts.h"
+ #include "yaffs_tagscompat.h"
+ #include "yaffs_ecc.h"
++#include "yaffs_getblockinfo.h"
+ 
+-static void yaffs_HandleReadDataError(yaffs_Device * dev, int chunkInNAND);
++static void yaffs_HandleReadDataError(yaffs_Device *dev, int chunkInNAND);
+ #ifdef NOTYET
+-static void yaffs_CheckWrittenBlock(yaffs_Device * dev, int chunkInNAND);
+-static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+-				     const __u8 * data,
+-				     const yaffs_Spare * spare);
+-static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+-				    const yaffs_Spare * spare);
+-static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND);
++static void yaffs_CheckWrittenBlock(yaffs_Device *dev, int chunkInNAND);
++static void yaffs_HandleWriteChunkOk(yaffs_Device *dev, int chunkInNAND,
++				     const __u8 *data,
++				     const yaffs_Spare *spare);
++static void yaffs_HandleUpdateChunk(yaffs_Device *dev, int chunkInNAND,
++				    const yaffs_Spare *spare);
++static void yaffs_HandleWriteChunkError(yaffs_Device *dev, int chunkInNAND);
+ #endif
+ 
+ static const char yaffs_countBitsTable[256] = {
+@@ -54,13 +55,13 @@ int yaffs_CountBits(__u8 x)
+ 
+ /********** Tags ECC calculations  *********/
+ 
+-void yaffs_CalcECC(const __u8 * data, yaffs_Spare * spare)
++void yaffs_CalcECC(const __u8 *data, yaffs_Spare *spare)
+ {
+ 	yaffs_ECCCalculate(data, spare->ecc1);
+ 	yaffs_ECCCalculate(&data[256], spare->ecc2);
+ }
+ 
+-void yaffs_CalcTagsECC(yaffs_Tags * tags)
++void yaffs_CalcTagsECC(yaffs_Tags *tags)
+ {
+ 	/* Calculate an ecc */
+ 
+@@ -74,9 +75,8 @@ void yaffs_CalcTagsECC(yaffs_Tags * tags
+ 	for (i = 0; i < 8; i++) {
+ 		for (j = 1; j & 0xff; j <<= 1) {
+ 			bit++;
+-			if (b[i] & j) {
++			if (b[i] & j)
+ 				ecc ^= bit;
+-			}
+ 		}
+ 	}
+ 
+@@ -84,7 +84,7 @@ void yaffs_CalcTagsECC(yaffs_Tags * tags
+ 
+ }
+ 
+-int yaffs_CheckECCOnTags(yaffs_Tags * tags)
++int yaffs_CheckECCOnTags(yaffs_Tags *tags)
+ {
+ 	unsigned ecc = tags->ecc;
+ 
+@@ -115,8 +115,8 @@ int yaffs_CheckECCOnTags(yaffs_Tags * ta
+ 
+ /********** Tags **********/
+ 
+-static void yaffs_LoadTagsIntoSpare(yaffs_Spare * sparePtr,
+-				    yaffs_Tags * tagsPtr)
++static void yaffs_LoadTagsIntoSpare(yaffs_Spare *sparePtr,
++				yaffs_Tags *tagsPtr)
+ {
+ 	yaffs_TagsUnion *tu = (yaffs_TagsUnion *) tagsPtr;
+ 
+@@ -132,8 +132,8 @@ static void yaffs_LoadTagsIntoSpare(yaff
+ 	sparePtr->tagByte7 = tu->asBytes[7];
+ }
+ 
+-static void yaffs_GetTagsFromSpare(yaffs_Device * dev, yaffs_Spare * sparePtr,
+-				   yaffs_Tags * tagsPtr)
++static void yaffs_GetTagsFromSpare(yaffs_Device *dev, yaffs_Spare *sparePtr,
++				yaffs_Tags *tagsPtr)
+ {
+ 	yaffs_TagsUnion *tu = (yaffs_TagsUnion *) tagsPtr;
+ 	int result;
+@@ -148,21 +148,20 @@ static void yaffs_GetTagsFromSpare(yaffs
+ 	tu->asBytes[7] = sparePtr->tagByte7;
+ 
+ 	result = yaffs_CheckECCOnTags(tagsPtr);
+-	if (result > 0) {
++	if (result > 0)
+ 		dev->tagsEccFixed++;
+-	} else if (result < 0) {
++	else if (result < 0)
+ 		dev->tagsEccUnfixed++;
+-	}
+ }
+ 
+-static void yaffs_SpareInitialise(yaffs_Spare * spare)
++static void yaffs_SpareInitialise(yaffs_Spare *spare)
+ {
+ 	memset(spare, 0xFF, sizeof(yaffs_Spare));
+ }
+ 
+ static int yaffs_WriteChunkToNAND(struct yaffs_DeviceStruct *dev,
+-				  int chunkInNAND, const __u8 * data,
+-				  yaffs_Spare * spare)
++				int chunkInNAND, const __u8 *data,
++				yaffs_Spare *spare)
+ {
+ 	if (chunkInNAND < dev->startBlock * dev->nChunksPerBlock) {
+ 		T(YAFFS_TRACE_ERROR,
+@@ -177,9 +176,9 @@ static int yaffs_WriteChunkToNAND(struct
+ 
+ static int yaffs_ReadChunkFromNAND(struct yaffs_DeviceStruct *dev,
+ 				   int chunkInNAND,
+-				   __u8 * data,
+-				   yaffs_Spare * spare,
+-				   yaffs_ECCResult * eccResult,
++				   __u8 *data,
++				   yaffs_Spare *spare,
++				   yaffs_ECCResult *eccResult,
+ 				   int doErrorCorrection)
+ {
+ 	int retVal;
+@@ -252,9 +251,11 @@ static int yaffs_ReadChunkFromNAND(struc
+ 		/* Must allocate enough memory for spare+2*sizeof(int) */
+ 		/* for ecc results from device. */
+ 		struct yaffs_NANDSpare nspare;
+-		retVal =
+-		    dev->readChunkFromNAND(dev, chunkInNAND, data,
+-					   (yaffs_Spare *) & nspare);
++
++		memset(&nspare, 0, sizeof(nspare));
++
++		retVal = dev->readChunkFromNAND(dev, chunkInNAND, data,
++					(yaffs_Spare *) &nspare);
+ 		memcpy(spare, &nspare, sizeof(yaffs_Spare));
+ 		if (data && doErrorCorrection) {
+ 			if (nspare.eccres1 > 0) {
+@@ -302,8 +303,7 @@ static int yaffs_ReadChunkFromNAND(struc
+ static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev,
+ 				  int chunkInNAND)
+ {
+-
+-	static int init = 0;
++	static int init;
+ 	static __u8 cmpbuf[YAFFS_BYTES_PER_CHUNK];
+ 	static __u8 data[YAFFS_BYTES_PER_CHUNK];
+ 	/* Might as well always allocate the larger size for */
+@@ -331,12 +331,12 @@ static int yaffs_CheckChunkErased(struct
+  * Functions for robustisizing
+  */
+ 
+-static void yaffs_HandleReadDataError(yaffs_Device * dev, int chunkInNAND)
++static void yaffs_HandleReadDataError(yaffs_Device *dev, int chunkInNAND)
+ {
+ 	int blockInNAND = chunkInNAND / dev->nChunksPerBlock;
+ 
+ 	/* Mark the block for retirement */
+-	yaffs_GetBlockInfo(dev, blockInNAND)->needsRetiring = 1;
++	yaffs_GetBlockInfo(dev, blockInNAND + dev->blockOffset)->needsRetiring = 1;
+ 	T(YAFFS_TRACE_ERROR | YAFFS_TRACE_BAD_BLOCKS,
+ 	  (TSTR("**>>Block %d marked for retirement" TENDSTR), blockInNAND));
+ 
+@@ -348,22 +348,22 @@ static void yaffs_HandleReadDataError(ya
+ }
+ 
+ #ifdef NOTYET
+-static void yaffs_CheckWrittenBlock(yaffs_Device * dev, int chunkInNAND)
++static void yaffs_CheckWrittenBlock(yaffs_Device *dev, int chunkInNAND)
+ {
+ }
+ 
+-static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+-				     const __u8 * data,
+-				     const yaffs_Spare * spare)
++static void yaffs_HandleWriteChunkOk(yaffs_Device *dev, int chunkInNAND,
++				     const __u8 *data,
++				     const yaffs_Spare *spare)
+ {
+ }
+ 
+-static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+-				    const yaffs_Spare * spare)
++static void yaffs_HandleUpdateChunk(yaffs_Device *dev, int chunkInNAND,
++				    const yaffs_Spare *spare)
+ {
+ }
+ 
+-static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND)
++static void yaffs_HandleWriteChunkError(yaffs_Device *dev, int chunkInNAND)
+ {
+ 	int blockInNAND = chunkInNAND / dev->nChunksPerBlock;
+ 
+@@ -373,8 +373,8 @@ static void yaffs_HandleWriteChunkError(
+ 	yaffs_DeleteChunk(dev, chunkInNAND, 1, __LINE__);
+ }
+ 
+-static int yaffs_VerifyCompare(const __u8 * d0, const __u8 * d1,
+-			       const yaffs_Spare * s0, const yaffs_Spare * s1)
++static int yaffs_VerifyCompare(const __u8 *d0, const __u8 *d1,
++			       const yaffs_Spare *s0, const yaffs_Spare *s1)
+ {
+ 
+ 	if (memcmp(d0, d1, YAFFS_BYTES_PER_CHUNK) != 0 ||
+@@ -398,28 +398,35 @@ static int yaffs_VerifyCompare(const __u
+ }
+ #endif				/* NOTYET */
+ 
+-int yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(yaffs_Device * dev,
+-						    int chunkInNAND,
+-						    const __u8 * data,
+-						    const yaffs_ExtendedTags *
+-						    eTags)
++int yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(yaffs_Device *dev,
++						int chunkInNAND,
++						const __u8 *data,
++						const yaffs_ExtendedTags *eTags)
+ {
+ 	yaffs_Spare spare;
+ 	yaffs_Tags tags;
+ 
+ 	yaffs_SpareInitialise(&spare);
+ 
+-	if (eTags->chunkDeleted) {
++	if (eTags->chunkDeleted)
+ 		spare.pageStatus = 0;
+-	} else {
++	else {
+ 		tags.objectId = eTags->objectId;
+ 		tags.chunkId = eTags->chunkId;
+-		tags.byteCount = eTags->byteCount;
++
++		tags.byteCountLSB = eTags->byteCount & 0x3ff;
++
++		if (dev->nDataBytesPerChunk >= 1024)
++			tags.byteCountMSB = (eTags->byteCount >> 10) & 3;
++		else
++			tags.byteCountMSB = 3;
++
++
+ 		tags.serialNumber = eTags->serialNumber;
+ 
+-		if (!dev->useNANDECC && data) {
++		if (!dev->useNANDECC && data)
+ 			yaffs_CalcECC(data, &spare);
+-		}
++
+ 		yaffs_LoadTagsIntoSpare(&spare, &tags);
+ 
+ 	}
+@@ -427,15 +434,15 @@ int yaffs_TagsCompatabilityWriteChunkWit
+ 	return yaffs_WriteChunkToNAND(dev, chunkInNAND, data, &spare);
+ }
+ 
+-int yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(yaffs_Device * dev,
++int yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(yaffs_Device *dev,
+ 						     int chunkInNAND,
+-						     __u8 * data,
+-						     yaffs_ExtendedTags * eTags)
++						     __u8 *data,
++						     yaffs_ExtendedTags *eTags)
+ {
+ 
+ 	yaffs_Spare spare;
+ 	yaffs_Tags tags;
+-	yaffs_ECCResult eccResult;
++	yaffs_ECCResult eccResult = YAFFS_ECC_RESULT_UNKNOWN;
+ 
+ 	static yaffs_Spare spareFF;
+ 	static int init;
+@@ -466,7 +473,11 @@ int yaffs_TagsCompatabilityReadChunkWith
+ 
+ 				eTags->objectId = tags.objectId;
+ 				eTags->chunkId = tags.chunkId;
+-				eTags->byteCount = tags.byteCount;
++				eTags->byteCount = tags.byteCountLSB;
++
++				if (dev->nDataBytesPerChunk >= 1024)
++					eTags->byteCount |= (((unsigned) tags.byteCountMSB) << 10);
++
+ 				eTags->serialNumber = tags.serialNumber;
+ 			}
+ 		}
+@@ -497,9 +508,9 @@ int yaffs_TagsCompatabilityMarkNANDBlock
+ }
+ 
+ int yaffs_TagsCompatabilityQueryNANDBlock(struct yaffs_DeviceStruct *dev,
+-					  int blockNo, yaffs_BlockState *
+-					  state,
+-					  int *sequenceNumber)
++					  int blockNo,
++					  yaffs_BlockState *state,
++					  __u32 *sequenceNumber)
+ {
+ 
+ 	yaffs_Spare spare0, spare1;
+--- a/fs/yaffs2/yaffs_tagscompat.h
++++ b/fs/yaffs2/yaffs_tagscompat.h
+@@ -17,24 +17,23 @@
+ #define __YAFFS_TAGSCOMPAT_H__
+ 
+ #include "yaffs_guts.h"
+-int yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(yaffs_Device * dev,
+-						    int chunkInNAND,
+-						    const __u8 * data,
+-						    const yaffs_ExtendedTags *
+-						    tags);
+-int yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(yaffs_Device * dev,
+-						     int chunkInNAND,
+-						     __u8 * data,
+-						     yaffs_ExtendedTags *
+-						     tags);
++int yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(yaffs_Device *dev,
++						int chunkInNAND,
++						const __u8 *data,
++						const yaffs_ExtendedTags *tags);
++int yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(yaffs_Device *dev,
++						int chunkInNAND,
++						__u8 *data,
++						yaffs_ExtendedTags *tags);
+ int yaffs_TagsCompatabilityMarkNANDBlockBad(struct yaffs_DeviceStruct *dev,
+ 					    int blockNo);
+ int yaffs_TagsCompatabilityQueryNANDBlock(struct yaffs_DeviceStruct *dev,
+-					  int blockNo, yaffs_BlockState *
+-					  state, int *sequenceNumber);
++					  int blockNo,
++					  yaffs_BlockState *state,
++					  __u32 *sequenceNumber);
+ 
+-void yaffs_CalcTagsECC(yaffs_Tags * tags);
+-int yaffs_CheckECCOnTags(yaffs_Tags * tags);
++void yaffs_CalcTagsECC(yaffs_Tags *tags);
++int yaffs_CheckECCOnTags(yaffs_Tags *tags);
+ int yaffs_CountBits(__u8 byte);
+ 
+ #endif
+--- a/fs/yaffs2/yaffs_tagsvalidity.c
++++ b/fs/yaffs2/yaffs_tagsvalidity.c
+@@ -13,14 +13,14 @@
+ 
+ #include "yaffs_tagsvalidity.h"
+ 
+-void yaffs_InitialiseTags(yaffs_ExtendedTags * tags)
++void yaffs_InitialiseTags(yaffs_ExtendedTags *tags)
+ {
+ 	memset(tags, 0, sizeof(yaffs_ExtendedTags));
+ 	tags->validMarker0 = 0xAAAAAAAA;
+ 	tags->validMarker1 = 0x55555555;
+ }
+ 
+-int yaffs_ValidateTags(yaffs_ExtendedTags * tags)
++int yaffs_ValidateTags(yaffs_ExtendedTags *tags)
+ {
+ 	return (tags->validMarker0 == 0xAAAAAAAA &&
+ 		tags->validMarker1 == 0x55555555);
+--- a/fs/yaffs2/yaffs_tagsvalidity.h
++++ b/fs/yaffs2/yaffs_tagsvalidity.h
+@@ -19,6 +19,6 @@
+ 
+ #include "yaffs_guts.h"
+ 
+-void yaffs_InitialiseTags(yaffs_ExtendedTags * tags);
+-int yaffs_ValidateTags(yaffs_ExtendedTags * tags);
++void yaffs_InitialiseTags(yaffs_ExtendedTags *tags);
++int yaffs_ValidateTags(yaffs_ExtendedTags *tags);
+ #endif
+--- a/fs/yaffs2/yportenv.h
++++ b/fs/yaffs2/yportenv.h
+@@ -17,17 +17,28 @@
+ #ifndef __YPORTENV_H__
+ #define __YPORTENV_H__
+ 
++/*
++ * Define the MTD version in terms of Linux Kernel versions
++ * This allows yaffs to be used independantly of the kernel
++ * as well as with it.
++ */
++
++#define MTD_VERSION(a, b, c) (((a) << 16) + ((b) << 8) + (c))
++
+ #if defined CONFIG_YAFFS_WINCE
+ 
+ #include "ywinceenv.h"
+ 
+-#elif  defined __KERNEL__
++#elif defined __KERNEL__
+ 
+ #include "moduleconfig.h"
+ 
+ /* Linux kernel */
++
+ #include <linux/version.h>
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19))
++#define MTD_VERSION_CODE LINUX_VERSION_CODE
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 19))
+ #include <linux/config.h>
+ #endif
+ #include <linux/kernel.h>
+@@ -40,12 +51,13 @@
+ #define YCHAR char
+ #define YUCHAR unsigned char
+ #define _Y(x)     x
+-#define yaffs_strcpy(a,b)    strcpy(a,b)
+-#define yaffs_strncpy(a,b,c) strncpy(a,b,c)
+-#define yaffs_strncmp(a,b,c) strncmp(a,b,c)
+-#define yaffs_strlen(s)	     strlen(s)
+-#define yaffs_sprintf	     sprintf
+-#define yaffs_toupper(a)     toupper(a)
++#define yaffs_strcat(a, b)     strcat(a, b)
++#define yaffs_strcpy(a, b)     strcpy(a, b)
++#define yaffs_strncpy(a, b, c) strncpy(a, b, c)
++#define yaffs_strncmp(a, b, c) strncmp(a, b, c)
++#define yaffs_strlen(s)	       strlen(s)
++#define yaffs_sprintf	       sprintf
++#define yaffs_toupper(a)       toupper(a)
+ 
+ #define Y_INLINE inline
+ 
+@@ -53,19 +65,19 @@
+ #define YAFFS_LOSTNFOUND_PREFIX		"obj"
+ 
+ /* #define YPRINTF(x) printk x */
+-#define YMALLOC(x) kmalloc(x,GFP_KERNEL)
++#define YMALLOC(x) kmalloc(x, GFP_NOFS)
+ #define YFREE(x)   kfree(x)
+ #define YMALLOC_ALT(x) vmalloc(x)
+ #define YFREE_ALT(x)   vfree(x)
+ #define YMALLOC_DMA(x) YMALLOC(x)
+ 
+-// KR - added for use in scan so processes aren't blocked indefinitely.
++/* KR - added for use in scan so processes aren't blocked indefinitely. */
+ #define YYIELD() schedule()
+ 
+ #define YAFFS_ROOT_MODE			0666
+ #define YAFFS_LOSTNFOUND_MODE		0666
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ #define Y_CURRENT_TIME CURRENT_TIME.tv_sec
+ #define Y_TIME_CONVERT(x) (x).tv_sec
+ #else
+@@ -73,11 +85,12 @@
+ #define Y_TIME_CONVERT(x) (x)
+ #endif
+ 
+-#define yaffs_SumCompare(x,y) ((x) == (y))
+-#define yaffs_strcmp(a,b) strcmp(a,b)
++#define yaffs_SumCompare(x, y) ((x) == (y))
++#define yaffs_strcmp(a, b) strcmp(a, b)
+ 
+ #define TENDSTR "\n"
+ #define TSTR(x) KERN_WARNING x
++#define TCONT(x) x
+ #define TOUT(p) printk p
+ 
+ #define yaffs_trace(mask, fmt, args...) \
+@@ -90,6 +103,8 @@
+ 
+ #elif defined CONFIG_YAFFS_DIRECT
+ 
++#define MTD_VERSION_CODE MTD_VERSION(2, 6, 22)
++
+ /* Direct interface */
+ #include "ydirectenv.h"
+ 
+@@ -111,11 +126,12 @@
+ #define YCHAR char
+ #define YUCHAR unsigned char
+ #define _Y(x)     x
+-#define yaffs_strcpy(a,b)    strcpy(a,b)
+-#define yaffs_strncpy(a,b,c) strncpy(a,b,c)
+-#define yaffs_strlen(s)	     strlen(s)
+-#define yaffs_sprintf	     sprintf
+-#define yaffs_toupper(a)     toupper(a)
++#define yaffs_strcat(a, b)     strcat(a, b)
++#define yaffs_strcpy(a, b)     strcpy(a, b)
++#define yaffs_strncpy(a, b, c) strncpy(a, b, c)
++#define yaffs_strlen(s)	       strlen(s)
++#define yaffs_sprintf	       sprintf
++#define yaffs_toupper(a)       toupper(a)
+ 
+ #define Y_INLINE inline
+ 
+@@ -133,8 +149,8 @@
+ #define YAFFS_ROOT_MODE				0666
+ #define YAFFS_LOSTNFOUND_MODE		0666
+ 
+-#define yaffs_SumCompare(x,y) ((x) == (y))
+-#define yaffs_strcmp(a,b) strcmp(a,b)
++#define yaffs_SumCompare(x, y) ((x) == (y))
++#define yaffs_strcmp(a, b) strcmp(a, b)
+ 
+ #else
+ /* Should have specified a configuration type */
+@@ -178,10 +194,10 @@ extern unsigned int yaffs_wr_attempts;
+ #define YAFFS_TRACE_ALWAYS		0xF0000000
+ 
+ 
+-#define T(mask,p) do{ if((mask) & (yaffs_traceMask | YAFFS_TRACE_ALWAYS)) TOUT(p);} while(0)
++#define T(mask, p) do { if ((mask) & (yaffs_traceMask | YAFFS_TRACE_ALWAYS)) TOUT(p); } while (0)
+ 
+-#ifndef CONFIG_YAFFS_WINCE
+-#define YBUG() T(YAFFS_TRACE_BUG,(TSTR("==>> yaffs bug: " __FILE__ " %d" TENDSTR),__LINE__))
++#ifndef YBUG
++#define YBUG() do {T(YAFFS_TRACE_BUG, (TSTR("==>> yaffs bug: " __FILE__ " %d" TENDSTR), __LINE__)); } while (0)
+ #endif
+ 
+ #endif
diff --git a/target/linux/generic/patches-2.6.30/600-phy_extension.patch b/target/linux/generic/patches-2.6.30/600-phy_extension.patch
new file mode 100644
index 0000000000..72a4fa5232
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/600-phy_extension.patch
@@ -0,0 +1,83 @@
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -299,6 +299,50 @@ int phy_ethtool_gset(struct phy_device *
+ }
+ EXPORT_SYMBOL(phy_ethtool_gset);
+ 
++int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr)
++{
++	u32 cmd;
++	int tmp;
++	struct ethtool_cmd ecmd = { ETHTOOL_GSET };
++	struct ethtool_value edata = { ETHTOOL_GLINK };
++
++	if (get_user(cmd, (u32 *) useraddr))
++		return -EFAULT;
++
++	switch (cmd) {
++	case ETHTOOL_GSET:
++		phy_ethtool_gset(phydev, &ecmd);
++		if (copy_to_user(useraddr, &ecmd, sizeof(ecmd)))
++			return -EFAULT;
++		return 0;
++
++	case ETHTOOL_SSET:
++		if (copy_from_user(&ecmd, useraddr, sizeof(ecmd)))
++			return -EFAULT;
++		return phy_ethtool_sset(phydev, &ecmd);
++
++	case ETHTOOL_NWAY_RST:
++		/* if autoneg is off, it's an error */
++		tmp = phy_read(phydev, MII_BMCR);
++		if (tmp & BMCR_ANENABLE) {
++			tmp |= (BMCR_ANRESTART);
++			phy_write(phydev, MII_BMCR, tmp);
++			return 0;
++		}
++		return -EINVAL;
++
++	case ETHTOOL_GLINK:
++		edata.data = (phy_read(phydev,
++				MII_BMSR) & BMSR_LSTATUS) ? 1 : 0;
++		if (copy_to_user(useraddr, &edata, sizeof(edata)))
++			return -EFAULT;
++		return 0;
++	}
++
++	return -EOPNOTSUPP;
++}
++EXPORT_SYMBOL(phy_ethtool_ioctl);
++
+ /**
+  * phy_mii_ioctl - generic PHY MII ioctl interface
+  * @phydev: the phy_device struct
+@@ -355,8 +399,8 @@ int phy_mii_ioctl(struct phy_device *phy
+ 		}
+ 
+ 		phy_write(phydev, mii_data->reg_num, val);
+-		
+-		if (mii_data->reg_num == MII_BMCR 
++
++		if (mii_data->reg_num == MII_BMCR
+ 				&& val & BMCR_RESET
+ 				&& phydev->drv->config_init) {
+ 			phy_scan_fixups(phydev);
+@@ -471,7 +515,7 @@ static void phy_force_reduction(struct p
+ 	int idx;
+ 
+ 	idx = phy_find_setting(phydev->speed, phydev->duplex);
+-	
++
+ 	idx++;
+ 
+ 	idx = phy_find_valid(idx, phydev->supported);
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -483,6 +483,7 @@ void phy_start_machine(struct phy_device
+ void phy_stop_machine(struct phy_device *phydev);
+ int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
+ int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
++int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr);
+ int phy_mii_ioctl(struct phy_device *phydev,
+ 		struct mii_ioctl_data *mii_data, int cmd);
+ int phy_start_interrupts(struct phy_device *phydev);
diff --git a/target/linux/generic/patches-2.6.30/601-phy-add-aneg-done-function.patch b/target/linux/generic/patches-2.6.30/601-phy-add-aneg-done-function.patch
new file mode 100644
index 0000000000..aac38ff2e7
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/601-phy-add-aneg-done-function.patch
@@ -0,0 +1,45 @@
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -393,9 +393,18 @@ struct phy_driver {
+ 	 */
+ 	int (*config_aneg)(struct phy_device *phydev);
+ 
++	/* Determine if autonegotiation is done */
++	int (*aneg_done)(struct phy_device *phydev);
++
+ 	/* Determines the negotiated speed and duplex */
+ 	int (*read_status)(struct phy_device *phydev);
+ 
++	/* 
++	 * Update the value in phydev->link to reflect the 
++	 * current link value
++	 */
++	int (*update_link)(struct phy_device *phydev);
++
+ 	/* Clears any pending interrupts */
+ 	int (*ack_interrupt)(struct phy_device *phydev);
+ 
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -695,6 +695,9 @@ int genphy_update_link(struct phy_device
+ {
+ 	int status;
+ 
++	if (phydev->drv->update_link)
++		return phydev->drv->update_link(phydev);
++
+ 	/* Do a fake read */
+ 	status = phy_read(phydev, MII_BMSR);
+ 
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -107,6 +107,9 @@ static inline int phy_aneg_done(struct p
+ {
+ 	int retval;
+ 
++	if (phydev->drv->aneg_done)
++		return phydev->drv->aneg_done(phydev);
++
+ 	retval = phy_read(phydev, MII_BMSR);
+ 
+ 	return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE);
diff --git a/target/linux/generic/patches-2.6.30/620-phy_adm6996.patch b/target/linux/generic/patches-2.6.30/620-phy_adm6996.patch
new file mode 100644
index 0000000000..8f61d95c2d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/620-phy_adm6996.patch
@@ -0,0 +1,24 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -82,6 +82,11 @@ config LSI_ET1011C_PHY
+ 	---help---
+ 	  Supports the LSI ET1011C PHY.
+ 
++config ADM6996_PHY
++	tristate "Driver for ADM6996 switches"
++	---help---
++	  Currently supports the ADM6996F switch
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -12,6 +12,7 @@ obj-$(CONFIG_SMSC_PHY)		+= smsc.o
+ obj-$(CONFIG_VITESSE_PHY)	+= vitesse.o
+ obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
+ obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
++obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
diff --git a/target/linux/generic/patches-2.6.30/630-phy_packets.patch b/target/linux/generic/patches-2.6.30/630-phy_packets.patch
new file mode 100644
index 0000000000..ab62b007af
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/630-phy_packets.patch
@@ -0,0 +1,63 @@
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -143,6 +143,18 @@ int phy_scan_fixups(struct phy_device *p
+ }
+ EXPORT_SYMBOL(phy_scan_fixups);
+ 
++static int generic_receive_skb(struct sk_buff *skb)
++{
++	skb->protocol = eth_type_trans(skb, skb->dev);
++	return netif_receive_skb(skb);
++}
++
++static int generic_rx(struct sk_buff *skb)
++{
++	skb->protocol = eth_type_trans(skb, skb->dev);
++	return netif_rx(skb);
++}
++
+ struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
+ {
+ 	struct phy_device *dev;
+@@ -168,6 +180,8 @@ struct phy_device* phy_device_create(str
+ 	dev->bus = bus;
+ 
+ 	dev->state = PHY_DOWN;
++	dev->netif_receive_skb = &generic_receive_skb;
++	dev->netif_rx = &generic_rx;
+ 
+ 	mutex_init(&dev->lock);
+ 
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -325,6 +325,20 @@ struct phy_device {
+ 	void (*adjust_link)(struct net_device *dev);
+ 
+ 	void (*adjust_state)(struct net_device *dev);
++
++	/*
++	 * By default these point to the original functions
++	 * with the same name. adding them to the phy_device
++	 * allows the phy driver to override them for packet
++	 * mangling if the ethernet driver supports it
++	 * This is required to support some really horrible
++	 * switches such as the Marvell 88E6060
++	 */
++	int (*netif_receive_skb)(struct sk_buff *skb);
++	int (*netif_rx)(struct sk_buff *skb);
++
++	/* alignment offset for packets */
++	int pkt_align;
+ };
+ #define to_phy_device(d) container_of(d, struct phy_device, dev)
+ 
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -770,6 +770,7 @@ struct net_device
+ 	void			*ax25_ptr;	/* AX.25 specific data */
+ 	struct wireless_dev	*ieee80211_ptr;	/* IEEE 802.11 specific data,
+ 						   assign before registering */
++	void			*phy_ptr; /* PHY device specific data */
+ 
+ /*
+  * Cache line mostly used on receive path (including eth_type_trans())
diff --git a/target/linux/generic/patches-2.6.30/640-br2684_backport_routed.patch b/target/linux/generic/patches-2.6.30/640-br2684_backport_routed.patch
new file mode 100644
index 0000000000..d925144fa9
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/640-br2684_backport_routed.patch
@@ -0,0 +1,42 @@
+commit 2e302ebfeac04beb5a5d6af1ac583c6a1fb76d1a
+Author: chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
+Date:   Fri Dec 4 11:06:32 2009 +0000
+
+    atm: [br2684] allow routed mode operation again
+    
+    in routed mode, we don't have a hardware address so netdev_ops doesnt
+    need to validate our hardware address via .ndo_validate_addr
+    
+    Reported-by: Manuel Fuentes <mfuentes@agenciaefe.com>
+    Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
+    Signed-off-by: David S. Miller <davem@davemloft.net>
+
+--- a/net/atm/br2684.c
++++ b/net/atm/br2684.c
+@@ -544,6 +544,12 @@ static const struct net_device_ops br268
+ 	.ndo_validate_addr	= eth_validate_addr,
+ };
+ 
++static const struct net_device_ops br2684_netdev_ops_routed = {
++	.ndo_start_xmit 	= br2684_start_xmit,
++	.ndo_set_mac_address	= br2684_mac_addr,
++	.ndo_change_mtu		= eth_change_mtu
++};
++
+ static void br2684_setup(struct net_device *netdev)
+ {
+ 	struct br2684_dev *brdev = BRPRIV(netdev);
+@@ -559,11 +565,10 @@ static void br2684_setup(struct net_devi
+ static void br2684_setup_routed(struct net_device *netdev)
+ {
+ 	struct br2684_dev *brdev = BRPRIV(netdev);
+-	brdev->net_dev = netdev;
+ 
++	brdev->net_dev = netdev;
+ 	netdev->hard_header_len = 0;
+-
+-	netdev->netdev_ops = &br2684_netdev_ops;
++	netdev->netdev_ops = &br2684_netdev_ops_routed;
+ 	netdev->addr_len = 0;
+ 	netdev->mtu = 1500;
+ 	netdev->type = ARPHRD_PPP;
diff --git a/target/linux/generic/patches-2.6.30/650-swconfig.patch b/target/linux/generic/patches-2.6.30/650-swconfig.patch
new file mode 100644
index 0000000000..6825037ce9
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/650-swconfig.patch
@@ -0,0 +1,25 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -13,6 +13,12 @@ menuconfig PHYLIB
+ 
+ if PHYLIB
+ 
++config SWCONFIG
++	tristate "Switch configuration API"
++	---help---
++	  Switch configuration API using netlink. This allows
++	  you to configure the VLAN features of certain switches.
++
+ comment "MII PHY device drivers"
+ 
+ config MARVELL_PHY
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -3,6 +3,7 @@
+ libphy-objs			:= phy.o phy_device.o mdio_bus.o
+ 
+ obj-$(CONFIG_PHYLIB)		+= libphy.o
++obj-$(CONFIG_SWCONFIG)		+= swconfig.o
+ obj-$(CONFIG_MARVELL_PHY)	+= marvell.o
+ obj-$(CONFIG_DAVICOM_PHY)	+= davicom.o
+ obj-$(CONFIG_CICADA_PHY)	+= cicada.o
diff --git a/target/linux/generic/patches-2.6.30/660-phy_mvswitch.patch b/target/linux/generic/patches-2.6.30/660-phy_mvswitch.patch
new file mode 100644
index 0000000000..731f30301f
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/660-phy_mvswitch.patch
@@ -0,0 +1,22 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -93,6 +93,9 @@ config ADM6996_PHY
+ 	---help---
+ 	  Currently supports the ADM6996F switch
+ 
++config MVSWITCH_PHY
++	tristate "Driver for Marvell 88E6060 switches"
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -14,6 +14,7 @@ obj-$(CONFIG_VITESSE_PHY)	+= vitesse.o
+ obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
+ obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
+ obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
++obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
diff --git a/target/linux/generic/patches-2.6.30/670-phy_ip175c.patch b/target/linux/generic/patches-2.6.30/670-phy_ip175c.patch
new file mode 100644
index 0000000000..5d8ba3c622
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/670-phy_ip175c.patch
@@ -0,0 +1,23 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -96,6 +96,10 @@ config ADM6996_PHY
+ config MVSWITCH_PHY
+ 	tristate "Driver for Marvell 88E6060 switches"
+ 
++config IP17XX_PHY
++	tristate "Driver for IC+ IP17xx switches"
++	select SWCONFIG
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -15,6 +15,7 @@ obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
+ obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
+ obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
+ obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
++obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
diff --git a/target/linux/generic/patches-2.6.30/680-phy_ar8216.patch b/target/linux/generic/patches-2.6.30/680-phy_ar8216.patch
new file mode 100644
index 0000000000..d9d3ce7721
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/680-phy_ar8216.patch
@@ -0,0 +1,23 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -100,6 +100,10 @@ config IP175C_PHY
+ 	tristate "Driver for IC+ IP175C/IP178C switches"
+ 	select SWCONFIG
+ 
++config AR8216_PHY
++	tristate "Driver for Atheros AR8216 switches"
++	select SWCONFIG
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -17,6 +17,7 @@ obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
+ obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
+ obj-$(CONFIG_IP175C_PHY)	+= ip175c.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
++obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
diff --git a/target/linux/generic/patches-2.6.30/690-phy_rtl8306.patch b/target/linux/generic/patches-2.6.30/690-phy_rtl8306.patch
new file mode 100644
index 0000000000..bfebbcff51
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/690-phy_rtl8306.patch
@@ -0,0 +1,23 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -104,6 +104,10 @@ config AR8216_PHY
+ 	tristate "Driver for Atheros AR8216 switches"
+ 	select SWCONFIG
+ 
++config RTL8306_PHY
++	tristate "Driver for Realtek RTL8306S switches"
++	select SWCONFIG
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -18,6 +18,7 @@ obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
+ obj-$(CONFIG_IP175C_PHY)	+= ip175c.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
++obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
diff --git a/target/linux/generic/patches-2.6.30/691-phy_rtl8366.patch b/target/linux/generic/patches-2.6.30/691-phy_rtl8366.patch
new file mode 100644
index 0000000000..4ce0520b11
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/691-phy_rtl8366.patch
@@ -0,0 +1,44 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -135,4 +135,29 @@ config MDIO_GPIO
+ 	  To compile this driver as a module, choose M here: the module
+ 	  will be called mdio-gpio.
+ 
++config RTL8366_SMI
++	tristate "Driver for the RTL8366 SMI interface"
++	depends on GENERIC_GPIO
++	---help---
++	  This module implements the SMI interface protocol which is used
++	  by some RTL8366 ethernet switch devices via the generic GPIO API.
++
++if RTL8366_SMI
++
++config RTL8366S_PHY
++	tristate "Driver for the Realtek RTL8366S switch"
++	select SWCONFIG
++
++config RTL8366RB_PHY
++	tristate "Driver for the Realtek RTL8366RB switch"
++	select SWCONFIG
++
++config RTL8366S_PHY_DEBUG_FS
++	bool "RTL8366 switch driver DEBUG_FS support"
++	depends on RTL8366S_PHY || RTL8366RB_PHY
++	depends on DEBUG_FS
++	default n
++
++endif # RTL8366_SMI
++
+ endif # PHYLIB
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -19,6 +19,9 @@ obj-$(CONFIG_IP175C_PHY)	+= ip175c.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
+ obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
++obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o
++obj-$(CONFIG_RTL8366S_PHY)	+= rtl8366s.o
++obj-$(CONFIG_RTL8366RB_PHY)	+= rtl8366rb.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
diff --git a/target/linux/generic/patches-2.6.30/700-rtc7301.patch b/target/linux/generic/patches-2.6.30/700-rtc7301.patch
new file mode 100644
index 0000000000..9d17e5c3a5
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/700-rtc7301.patch
@@ -0,0 +1,250 @@
+--- a/drivers/rtc/Kconfig
++++ b/drivers/rtc/Kconfig
+@@ -526,6 +526,15 @@ config RTC_DRV_PCF50633
+ 	  If you say yes here you get support for the RTC subsystem of the
+ 	  NXP PCF50633 used in embedded systems.
+ 
++config RTC_DRV_RTC7301
++	tristate "Epson RTC-7301 SF/DG"
++	help
++	  If you say Y here you will get support for the
++	  Epson RTC-7301 SF/DG RTC chips.
++
++	  This driver can also be built as a module. If so, the module
++	  will be called rtc-7301.
++
+ comment "on-CPU RTC drivers"
+ 
+ config RTC_DRV_OMAP
+--- a/drivers/rtc/Makefile
++++ b/drivers/rtc/Makefile
+@@ -62,6 +62,7 @@ obj-$(CONFIG_RTC_DRV_R9701)	+= rtc-r9701
+ obj-$(CONFIG_RTC_DRV_RS5C313)	+= rtc-rs5c313.o
+ obj-$(CONFIG_RTC_DRV_RS5C348)	+= rtc-rs5c348.o
+ obj-$(CONFIG_RTC_DRV_RS5C372)	+= rtc-rs5c372.o
++obj-$(CONFIG_RTC_DRV_RTC7301)	+= rtc-rtc7301.o
+ obj-$(CONFIG_RTC_DRV_RX8581)	+= rtc-rx8581.o
+ obj-$(CONFIG_RTC_DRV_S35390A)	+= rtc-s35390a.o
+ obj-$(CONFIG_RTC_DRV_S3C)	+= rtc-s3c.o
+--- /dev/null
++++ b/drivers/rtc/rtc-rtc7301.c
+@@ -0,0 +1,219 @@
++/*
++ * Driver for Epson RTC-7301SF/DG
++ *
++ * Copyright (C) 2009 Jose Vasconcellos
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/rtc.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/delay.h>
++#include <linux/bcd.h>
++
++#define RTC_NAME "rtc7301"
++#define RTC_VERSION "0.1"
++
++/* Epson RTC-7301 register addresses */
++#define RTC7301_SEC		0x00
++#define RTC7301_SEC10		0x01
++#define RTC7301_MIN		0x02
++#define RTC7301_MIN10		0x03
++#define RTC7301_HOUR		0x04
++#define RTC7301_HOUR10		0x05
++#define RTC7301_WEEKDAY		0x06
++#define RTC7301_DAY		0x07
++#define RTC7301_DAY10		0x08
++#define RTC7301_MON		0x09
++#define RTC7301_MON10		0x0A
++#define RTC7301_YEAR		0x0B
++#define RTC7301_YEAR10		0x0C
++#define RTC7301_YEAR100		0x0D
++#define RTC7301_YEAR1000	0x0E
++#define RTC7301_CTRLREG		0x0F
++
++static uint8_t __iomem *rtc7301_base;
++
++#define read_reg(offset) (readb(rtc7301_base + offset) & 0xf)
++#define write_reg(offset, data) writeb(data, rtc7301_base + (offset))
++
++#define rtc7301_isbusy() (read_reg(RTC7301_CTRLREG) & 1)
++
++static void rtc7301_init_settings(void)
++{
++	int i;
++
++	write_reg(RTC7301_CTRLREG, 2);
++	write_reg(RTC7301_YEAR1000, 2);
++	udelay(122);
++
++	/* bank 1 */
++	write_reg(RTC7301_CTRLREG, 6);
++	for (i=0; i<15; i++)
++		write_reg(i, 0);
++
++	/* bank 2 */
++	write_reg(RTC7301_CTRLREG, 14);
++	for (i=0; i<15; i++)
++		write_reg(i, 0);
++	write_reg(RTC7301_CTRLREG, 0);
++}
++
++static int rtc7301_get_datetime(struct device *dev, struct rtc_time *dt)
++{
++	int cnt;
++	uint8_t buf[16];
++
++	cnt = 0;
++	while (rtc7301_isbusy()) {
++		udelay(244);
++		if (cnt++ > 100) {
++			dev_err(dev, "%s: timeout error %x\n", __func__, rtc7301_base[RTC7301_CTRLREG]);
++			return -EIO;
++		}
++	}
++
++	for (cnt=0; cnt<16; cnt++)
++		buf[cnt] = read_reg(cnt);
++
++	if (buf[RTC7301_SEC10] & 8) {
++		dev_err(dev, "%s: RTC not set\n", __func__);
++		return -EINVAL;
++	}
++
++	memset(dt, 0, sizeof(*dt));
++
++	dt->tm_sec =  buf[RTC7301_SEC] + buf[RTC7301_SEC10]*10;
++	dt->tm_min =  buf[RTC7301_MIN] + buf[RTC7301_MIN10]*10;
++	dt->tm_hour = buf[RTC7301_HOUR] + buf[RTC7301_HOUR10]*10;
++
++	dt->tm_mday = buf[RTC7301_DAY] + buf[RTC7301_DAY10]*10;
++	dt->tm_mon =  buf[RTC7301_MON] + buf[RTC7301_MON10]*10 - 1;
++	dt->tm_year = buf[RTC7301_YEAR] + buf[RTC7301_YEAR10]*10 +
++		      buf[RTC7301_YEAR100]*100 +
++		      ((buf[RTC7301_YEAR1000] & 3)*1000) - 1900;
++
++	/* the rtc device may contain illegal values on power up
++	 * according to the data sheet. make sure they are valid.
++	 */
++
++	return rtc_valid_tm(dt);
++}
++
++static int rtc7301_set_datetime(struct device *dev, struct rtc_time *dt)
++{
++	int data;
++
++	data = dt->tm_year + 1900;
++	if (data >= 2100 || data < 1900)
++		return -EINVAL;
++
++	write_reg(RTC7301_CTRLREG, 2);
++       	udelay(122);
++
++	data = bin2bcd(dt->tm_sec);
++	write_reg(RTC7301_SEC, data);
++	write_reg(RTC7301_SEC10, (data >> 4));
++
++	data = bin2bcd(dt->tm_min);
++	write_reg(RTC7301_MIN, data );
++	write_reg(RTC7301_MIN10, (data >> 4));
++
++	data = bin2bcd(dt->tm_hour);
++	write_reg(RTC7301_HOUR, data);
++	write_reg(RTC7301_HOUR10, (data >> 4));
++
++	data = bin2bcd(dt->tm_mday);
++	write_reg(RTC7301_DAY, data);
++	write_reg(RTC7301_DAY10, (data>> 4));
++
++	data = bin2bcd(dt->tm_mon + 1);
++	write_reg(RTC7301_MON, data);
++	write_reg(RTC7301_MON10, (data >> 4));
++
++	data = bin2bcd(dt->tm_year % 100);
++	write_reg(RTC7301_YEAR, data);
++	write_reg(RTC7301_YEAR10, (data >> 4));
++	data = bin2bcd((1900 + dt->tm_year) / 100);
++	write_reg(RTC7301_YEAR100, data);
++
++	data = bin2bcd(dt->tm_wday);
++	write_reg(RTC7301_WEEKDAY, data);
++
++	write_reg(RTC7301_CTRLREG, 0);
++
++	return 0;
++}
++
++static const struct rtc_class_ops rtc7301_rtc_ops = {
++	.read_time	= rtc7301_get_datetime,
++	.set_time	= rtc7301_set_datetime,
++};
++
++static int __devinit rtc7301_probe(struct platform_device *pdev)
++{
++	struct rtc_device *rtc;
++	struct resource *res;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res)
++		return -ENOENT;
++
++	rtc7301_base = ioremap_nocache(res->start, 0x1000 /*res->end - res->start + 1*/);
++	if (!rtc7301_base)
++		return -EINVAL;
++
++	rtc = rtc_device_register(RTC_NAME, &pdev->dev,
++				&rtc7301_rtc_ops, THIS_MODULE);
++	if (IS_ERR(rtc)) {
++		iounmap(rtc7301_base);
++		return PTR_ERR(rtc);
++	}
++
++	platform_set_drvdata(pdev, rtc);
++
++	rtc7301_init_settings();
++	return 0;
++}
++
++static int __devexit rtc7301_remove(struct platform_device *pdev)
++{
++	struct rtc_device *rtc = platform_get_drvdata(pdev);
++
++	if (rtc)
++		rtc_device_unregister(rtc);
++	if (rtc7301_base)
++		iounmap(rtc7301_base);
++	return 0;
++}
++
++static struct platform_driver rtc7301_driver = {
++	.driver = {
++		.name	= RTC_NAME,
++		.owner	= THIS_MODULE,
++	},
++	.probe	= rtc7301_probe,
++	.remove = __devexit_p(rtc7301_remove),
++};
++
++static __init int rtc7301_init(void)
++{
++	return platform_driver_register(&rtc7301_driver);
++}
++module_init(rtc7301_init);
++
++static __exit void rtc7301_exit(void)
++{
++	platform_driver_unregister(&rtc7301_driver);
++}
++module_exit(rtc7301_exit);
++
++MODULE_DESCRIPTION("Epson 7301 RTC driver");
++MODULE_AUTHOR("Jose Vasconcellos <jvasco@verizon.net>");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:" RTC_NAME);
++MODULE_VERSION(RTC_VERSION);
diff --git a/target/linux/generic/patches-2.6.30/750-glamo-headers.patch b/target/linux/generic/patches-2.6.30/750-glamo-headers.patch
new file mode 100644
index 0000000000..79fd131c1d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/750-glamo-headers.patch
@@ -0,0 +1,21 @@
+--- a/include/linux/fb.h
++++ b/include/linux/fb.h
+@@ -124,6 +124,7 @@ struct dentry;
+ #define FB_ACCEL_TRIDENT_BLADE3D 52	/* Trident Blade3D		*/
+ #define FB_ACCEL_TRIDENT_BLADEXP 53	/* Trident BladeXP		*/
+ #define FB_ACCEL_CIRRUS_ALPINE   53	/* Cirrus Logic 543x/544x/5480	*/
++#define FB_ACCEL_GLAMO		50	/* SMedia Glamo                 */
+ #define FB_ACCEL_NEOMAGIC_NM2070 90	/* NeoMagic NM2070              */
+ #define FB_ACCEL_NEOMAGIC_NM2090 91	/* NeoMagic NM2090              */
+ #define FB_ACCEL_NEOMAGIC_NM2093 92	/* NeoMagic NM2093              */
+--- a/include/linux/Kbuild
++++ b/include/linux/Kbuild
+@@ -75,6 +75,8 @@ header-y += genetlink.h
+ header-y += gen_stats.h
+ header-y += gfs2_ondisk.h
+ header-y += gigaset_dev.h
++header-y += glamofb.h
++header-y += glamo-engine.h
+ header-y += hysdn_if.h
+ header-y += i2o-dev.h
+ header-y += i8k.h
diff --git a/target/linux/generic/patches-2.6.30/780-fix-race-in-snd_soc_jack_add_gpios.patch b/target/linux/generic/patches-2.6.30/780-fix-race-in-snd_soc_jack_add_gpios.patch
new file mode 100644
index 0000000000..b7214b9d6d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/780-fix-race-in-snd_soc_jack_add_gpios.patch
@@ -0,0 +1,33 @@
+commit 5ced436d549d911ce610ea47d85f71fae5bbfce4
+Author: Lars-Peter Clausen <lars@metafoo.de>
+Date:   Fri Jul 31 18:26:48 2009 +0200
+
+    ASoC: jack: Fix race in snd_soc_jack_add_gpios
+    
+    The irq can fire as soon as it has been requested, thus all fields accessed
+    from within the irq handler must be initialized prior to requesting the irq.
+    
+    Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
+
+--- a/sound/soc/soc-jack.c
++++ b/sound/soc/soc-jack.c
+@@ -220,6 +220,9 @@ int snd_soc_jack_add_gpios(struct snd_so
+ 		if (ret)
+ 			goto err;
+ 
++		INIT_WORK(&gpios[i].work, gpio_work);
++		gpios[i].jack = jack;
++
+ 		ret = request_irq(gpio_to_irq(gpios[i].gpio),
+ 				gpio_handler,
+ 				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+@@ -227,9 +230,6 @@ int snd_soc_jack_add_gpios(struct snd_so
+ 				&gpios[i]);
+ 		if (ret)
+ 			goto err;
+-
+-		INIT_WORK(&gpios[i].work, gpio_work);
+-		gpios[i].jack = jack;
+ 	}
+ 
+ 	return 0;
diff --git a/target/linux/generic/patches-2.6.30/801-usb_serial_endpoint_size.patch b/target/linux/generic/patches-2.6.30/801-usb_serial_endpoint_size.patch
new file mode 100644
index 0000000000..8eaead9292
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/801-usb_serial_endpoint_size.patch
@@ -0,0 +1,25 @@
+--- a/drivers/usb/serial/usb-serial.c
++++ b/drivers/usb/serial/usb-serial.c
+@@ -60,6 +60,7 @@ static struct usb_driver usb_serial_driv
+    drivers depend on it.
+ */
+ 
++static ushort maxSize = 0;
+ static int debug;
+ /* initially all NULL */
+ static struct usb_serial *serial_table[SERIAL_TTY_MINORS];
+@@ -864,7 +865,7 @@ int usb_serial_probe(struct usb_interfac
+ 			dev_err(&interface->dev, "No free urbs available\n");
+ 			goto probe_error;
+ 		}
+-		buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
++		buffer_size = (endpoint->wMaxPacketSize > maxSize) ? endpoint->wMaxPacketSize : maxSize;
+ 		port->bulk_in_size = buffer_size;
+ 		port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
+ 		port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
+@@ -1309,3 +1310,5 @@ MODULE_LICENSE("GPL");
+ 
+ module_param(debug, bool, S_IRUGO | S_IWUSR);
+ MODULE_PARM_DESC(debug, "Debug enabled or not");
++module_param(maxSize, ushort,0);
++MODULE_PARM_DESC(maxSize,"User specified USB endpoint size");
diff --git a/target/linux/generic/patches-2.6.30/840-unable_to_open_console.patch b/target/linux/generic/patches-2.6.30/840-unable_to_open_console.patch
new file mode 100644
index 0000000000..c9a2774689
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/840-unable_to_open_console.patch
@@ -0,0 +1,11 @@
+--- a/init/main.c
++++ b/init/main.c
+@@ -812,7 +812,7 @@ static noinline int init_post(void)
+ 	numa_default_policy();
+ 
+ 	if (sys_open((const char __user *) "/dev/console", O_RDWR, 0) < 0)
+-		printk(KERN_WARNING "Warning: unable to open an initial console.\n");
++		printk(KERN_WARNING "Please be patient, while OpenWrt loads ...\n");
+ 
+ 	(void) sys_dup(0);
+ 	(void) sys_dup(0);
diff --git a/target/linux/generic/patches-2.6.30/902-darwin_scripts_include.patch b/target/linux/generic/patches-2.6.30/902-darwin_scripts_include.patch
new file mode 100644
index 0000000000..4ff1536773
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/902-darwin_scripts_include.patch
@@ -0,0 +1,102 @@
+--- a/scripts/genksyms/parse.c_shipped
++++ b/scripts/genksyms/parse.c_shipped
+@@ -160,7 +160,9 @@
+ 
+ 
+ #include <assert.h>
++#ifndef __APPLE__
+ #include <malloc.h>
++#endif
+ #include "genksyms.h"
+ 
+ static int is_typedef;
+--- a/scripts/genksyms/parse.y
++++ b/scripts/genksyms/parse.y
+@@ -24,7 +24,9 @@
+ %{
+ 
+ #include <assert.h>
++#ifndef __APPLE__
+ #include <malloc.h>
++#endif
+ #include "genksyms.h"
+ 
+ static int is_typedef;
+--- a/scripts/kallsyms.c
++++ b/scripts/kallsyms.c
+@@ -22,6 +22,35 @@
+ #include <stdlib.h>
+ #include <string.h>
+ #include <ctype.h>
++#ifdef __APPLE__
++/* Darwin has no memmem implementation, this one is ripped of the uClibc-0.9.28 source */
++void *memmem (const void *haystack, size_t haystack_len,
++                          const void *needle,  size_t needle_len)
++{
++  const char *begin;
++  const char *const last_possible
++    = (const char *) haystack + haystack_len - needle_len;
++
++  if (needle_len == 0)
++    /* The first occurrence of the empty string is deemed to occur at
++       the beginning of the string.  */
++    return (void *) haystack;
++
++  /* Sanity check, otherwise the loop might search through the whole
++     memory.  */
++  if (__builtin_expect (haystack_len < needle_len, 0))
++    return NULL;
++
++  for (begin = (const char *) haystack; begin <= last_possible; ++begin)
++    if (begin[0] == ((const char *) needle)[0] &&
++        !memcmp ((const void *) &begin[1],
++                 (const void *) ((const char *) needle + 1),
++                 needle_len - 1))
++      return (void *) begin;
++
++  return NULL;
++}
++#endif
+ 
+ #define KSYM_NAME_LEN		128
+ 
+--- a/scripts/kconfig/Makefile
++++ b/scripts/kconfig/Makefile
+@@ -97,6 +97,9 @@ check-lxdialog  := $(srctree)/$(src)/lxd
+ # we really need to do so. (Do not call gcc as part of make mrproper)
+ HOST_EXTRACFLAGS = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags)
+ HOST_LOADLIBES   = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
++ifeq ($(shell uname -s),Darwin)
++HOST_LOADLIBES  += -lncurses
++endif
+ 
+ HOST_EXTRACFLAGS += -DLOCALE
+ 
+--- a/scripts/mod/mk_elfconfig.c
++++ b/scripts/mod/mk_elfconfig.c
+@@ -1,7 +1,11 @@
+ #include <stdio.h>
+ #include <stdlib.h>
+ #include <string.h>
++#ifndef __APPLE__
+ #include <elf.h>
++#else
++#include "../../../../../tools/sstrip/include/elf.h"
++#endif
+ 
+ int
+ main(int argc, char **argv)
+--- a/scripts/mod/modpost.h
++++ b/scripts/mod/modpost.h
+@@ -7,7 +7,11 @@
+ #include <sys/mman.h>
+ #include <fcntl.h>
+ #include <unistd.h>
++#if !(defined(__APPLE__) || defined(__CYGWIN__))
+ #include <elf.h>
++#else
++#include "../../../../../tools/sstrip/include/elf.h"
++#endif
+ 
+ #include "elfconfig.h"
+ 
diff --git a/target/linux/generic/patches-2.6.30/903-hostap_txpower.patch b/target/linux/generic/patches-2.6.30/903-hostap_txpower.patch
new file mode 100644
index 0000000000..197d0a1e32
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/903-hostap_txpower.patch
@@ -0,0 +1,154 @@
+--- a/drivers/net/wireless/hostap/hostap_ap.c
++++ b/drivers/net/wireless/hostap/hostap_ap.c
+@@ -2335,13 +2335,13 @@ int prism2_ap_get_sta_qual(local_info_t 
+ 		addr[count].sa_family = ARPHRD_ETHER;
+ 		memcpy(addr[count].sa_data, sta->addr, ETH_ALEN);
+ 		if (sta->last_rx_silence == 0)
+-			qual[count].qual = sta->last_rx_signal < 27 ?
+-				0 : (sta->last_rx_signal - 27) * 92 / 127;
++                        qual[count].qual = (sta->last_rx_signal - 156) == 0 ?
++                                0 : (sta->last_rx_signal - 156) * 92 / 64;
+ 		else
+-			qual[count].qual = sta->last_rx_signal -
+-				sta->last_rx_silence - 35;
+-		qual[count].level = HFA384X_LEVEL_TO_dBm(sta->last_rx_signal);
+-		qual[count].noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence);
++                        qual[count].qual = (sta->last_rx_signal -
++                                sta->last_rx_silence) * 92 / 64;
++                qual[count].level = sta->last_rx_signal;
++                qual[count].noise = sta->last_rx_silence;
+ 		qual[count].updated = sta->last_rx_updated;
+ 
+ 		sta->last_rx_updated = IW_QUAL_DBM;
+@@ -2407,13 +2407,13 @@ int prism2_ap_translate_scan(struct net_
+ 		memset(&iwe, 0, sizeof(iwe));
+ 		iwe.cmd = IWEVQUAL;
+ 		if (sta->last_rx_silence == 0)
+-			iwe.u.qual.qual = sta->last_rx_signal < 27 ?
+-				0 : (sta->last_rx_signal - 27) * 92 / 127;
++	                iwe.u.qual.qual = (sta->last_rx_signal -156) == 0 ?
++	                        0 : (sta->last_rx_signal - 156) * 92 / 64;
+ 		else
+-			iwe.u.qual.qual = sta->last_rx_signal -
+-				sta->last_rx_silence - 35;
+-		iwe.u.qual.level = HFA384X_LEVEL_TO_dBm(sta->last_rx_signal);
+-		iwe.u.qual.noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence);
++                        iwe.u.qual.qual = (sta->last_rx_signal -
++                                sta->last_rx_silence) * 92 / 64;
++                iwe.u.qual.level = sta->last_rx_signal;
++                iwe.u.qual.noise = sta->last_rx_silence;
+ 		iwe.u.qual.updated = sta->last_rx_updated;
+ 		iwe.len = IW_EV_QUAL_LEN;
+ 		current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+--- a/drivers/net/wireless/hostap/hostap_config.h
++++ b/drivers/net/wireless/hostap/hostap_config.h
+@@ -45,4 +45,9 @@
+  */
+ /* #define PRISM2_NO_STATION_MODES */
+ 
++/* Enable TX power Setting functions
++ * (min att = -128 , max att =  127)
++ */
++#define RAW_TXPOWER_SETTING
++
+ #endif /* HOSTAP_CONFIG_H */
+--- a/drivers/net/wireless/hostap/hostap.h
++++ b/drivers/net/wireless/hostap/hostap.h
+@@ -90,6 +90,7 @@ extern const struct iw_handler_def hosta
+ extern const struct ethtool_ops prism2_ethtool_ops;
+ 
+ int hostap_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
++int hostap_restore_power(struct net_device *dev);
+ 
+ 
+ #endif /* HOSTAP_H */
+--- a/drivers/net/wireless/hostap/hostap_hw.c
++++ b/drivers/net/wireless/hostap/hostap_hw.c
+@@ -932,6 +932,7 @@ static int hfa384x_set_rid(struct net_de
+ 			prism2_hw_reset(dev);
+ 	}
+ 
++	hostap_restore_power(dev);
+ 	return res;
+ }
+ 
+--- a/drivers/net/wireless/hostap/hostap_info.c
++++ b/drivers/net/wireless/hostap/hostap_info.c
+@@ -431,6 +431,11 @@ static void handle_info_queue_linkstatus
+ 	}
+ 
+ 	/* Get BSSID if we have a valid AP address */
++
++	if ( val == HFA384X_LINKSTATUS_CONNECTED ||
++	     val == HFA384X_LINKSTATUS_DISCONNECTED )
++			hostap_restore_power(local->dev);
++
+ 	if (connected) {
+ 		netif_carrier_on(local->dev);
+ 		netif_carrier_on(local->ddev);
+--- a/drivers/net/wireless/hostap/hostap_ioctl.c
++++ b/drivers/net/wireless/hostap/hostap_ioctl.c
+@@ -1475,23 +1475,20 @@ static int prism2_txpower_hfa386x_to_dBm
+ 		val = 255;
+ 
+ 	tmp = val;
+-	tmp >>= 2;
+ 
+-	return -12 - tmp;
++	return tmp;
+ }
+ 
+ static u16 prism2_txpower_dBm_to_hfa386x(int val)
+ {
+ 	signed char tmp;
+ 
+-	if (val > 20)
+-		return 128;
+-	else if (val < -43)
++	if (val > 127)
+ 		return 127;
++	else if (val < -128)
++		return 128;
+ 
+ 	tmp = val;
+-	tmp = -12 - tmp;
+-	tmp <<= 2;
+ 
+ 	return (unsigned char) tmp;
+ }
+@@ -4055,3 +4052,35 @@ int hostap_ioctl(struct net_device *dev,
+ 
+ 	return ret;
+ }
++
++/* BUG FIX: Restore power setting value when lost due to F/W bug */
++
++int hostap_restore_power(struct net_device *dev)
++{
++        struct hostap_interface *iface = netdev_priv(dev);
++       local_info_t *local = iface->local;
++
++       u16 val;
++       int ret = 0;
++
++       if (local->txpower_type == PRISM2_TXPOWER_OFF) {
++                       val = 0xff; /* use all standby and sleep modes */
++                       ret = local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF,
++                                              HFA386X_CR_A_D_TEST_MODES2,
++                                              &val, NULL);
++       }
++
++#ifdef RAW_TXPOWER_SETTING
++       if (local->txpower_type == PRISM2_TXPOWER_FIXED) {
++               val = HFA384X_TEST_CFG_BIT_ALC;
++               local->func->cmd(dev, HFA384X_CMDCODE_TEST |
++                                (HFA384X_TEST_CFG_BITS << 8), 0, &val, NULL);
++               val = prism2_txpower_dBm_to_hfa386x(local->txpower);
++               ret = (local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF,
++                            HFA386X_CR_MANUAL_TX_POWER, &val, NULL));
++       }
++#endif /* RAW_TXPOWER_SETTING */
++       return (ret ? -EOPNOTSUPP : 0);
++}
++
++EXPORT_SYMBOL(hostap_restore_power);
diff --git a/target/linux/generic/patches-2.6.30/903-stddef_include.patch b/target/linux/generic/patches-2.6.30/903-stddef_include.patch
new file mode 100644
index 0000000000..7fe248d8d3
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/903-stddef_include.patch
@@ -0,0 +1,17 @@
+--- a/include/linux/stddef.h
++++ b/include/linux/stddef.h
+@@ -16,6 +16,7 @@ enum {
+ 	false	= 0,
+ 	true	= 1
+ };
++#endif /* __KERNEL__ */
+ 
+ #undef offsetof
+ #ifdef __compiler_offsetof
+@@ -23,6 +24,5 @@ enum {
+ #else
+ #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
+ #endif
+-#endif /* __KERNEL__ */
+ 
+ #endif
diff --git a/target/linux/generic/patches-2.6.30/905-i386_build.patch b/target/linux/generic/patches-2.6.30/905-i386_build.patch
new file mode 100644
index 0000000000..c701fdaa95
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/905-i386_build.patch
@@ -0,0 +1,10 @@
+--- a/arch/x86/boot/tools/build.c
++++ b/arch/x86/boot/tools/build.c
+@@ -29,7 +29,6 @@
+ #include <stdarg.h>
+ #include <sys/types.h>
+ #include <sys/stat.h>
+-#include <sys/sysmacros.h>
+ #include <unistd.h>
+ #include <fcntl.h>
+ #include <sys/mman.h>
diff --git a/target/linux/generic/patches-2.6.30/910-hostap_tx_queue_len_fix.patch b/target/linux/generic/patches-2.6.30/910-hostap_tx_queue_len_fix.patch
new file mode 100644
index 0000000000..b421662d9c
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/910-hostap_tx_queue_len_fix.patch
@@ -0,0 +1,20 @@
+--- a/drivers/net/wireless/hostap/hostap_main.c
++++ b/drivers/net/wireless/hostap/hostap_main.c
+@@ -875,15 +875,16 @@ void hostap_setup_dev(struct net_device 
+ 
+ 	switch(type) {
+ 	case HOSTAP_INTERFACE_AP:
++		dev->tx_queue_len = 0;	/* use main radio device queue */
+ 		dev->netdev_ops = &hostap_mgmt_netdev_ops;
+ 		dev->type = ARPHRD_IEEE80211;
+ 		dev->header_ops = &hostap_80211_ops;
+ 		break;
+ 	case HOSTAP_INTERFACE_MASTER:
+-		dev->tx_queue_len = 0;	/* use main radio device queue */
+ 		dev->netdev_ops = &hostap_master_ops;
+ 		break;
+ 	default:
++		dev->tx_queue_len = 0;	/* use main radio device queue */
+ 		dev->netdev_ops = &hostap_netdev_ops;
+ 	}
+ 
diff --git a/target/linux/generic/patches-2.6.30/920-01-hotpluggable-spi-gpio.patch b/target/linux/generic/patches-2.6.30/920-01-hotpluggable-spi-gpio.patch
new file mode 100644
index 0000000000..b10bc9a65e
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/920-01-hotpluggable-spi-gpio.patch
@@ -0,0 +1,60 @@
+Fix spi-gpio for hotplug.
+
+--mb
+
+
+
+--- a/drivers/spi/spi_gpio.c
++++ b/drivers/spi/spi_gpio.c
+@@ -218,7 +218,7 @@ static void spi_gpio_cleanup(struct spi_
+ 	spi_bitbang_cleanup(spi);
+ }
+ 
+-static int __init spi_gpio_alloc(unsigned pin, const char *label, bool is_in)
++static int __devinit spi_gpio_alloc(unsigned pin, const char *label, bool is_in)
+ {
+ 	int value;
+ 
+@@ -232,7 +232,7 @@ static int __init spi_gpio_alloc(unsigne
+ 	return value;
+ }
+ 
+-static int __init
++static int __devinit
+ spi_gpio_request(struct spi_gpio_platform_data *pdata, const char *label)
+ {
+ 	int value;
+@@ -261,7 +261,7 @@ done:
+ 	return value;
+ }
+ 
+-static int __init spi_gpio_probe(struct platform_device *pdev)
++static int __devinit spi_gpio_probe(struct platform_device *pdev)
+ {
+ 	int				status;
+ 	struct spi_master		*master;
+@@ -317,7 +317,7 @@ gpio_free:
+ 	return status;
+ }
+ 
+-static int __exit spi_gpio_remove(struct platform_device *pdev)
++static int __devexit spi_gpio_remove(struct platform_device *pdev)
+ {
+ 	struct spi_gpio			*spi_gpio;
+ 	struct spi_gpio_platform_data	*pdata;
+@@ -344,12 +344,13 @@ MODULE_ALIAS("platform:" DRIVER_NAME);
+ static struct platform_driver spi_gpio_driver = {
+ 	.driver.name	= DRIVER_NAME,
+ 	.driver.owner	= THIS_MODULE,
+-	.remove		= __exit_p(spi_gpio_remove),
++	.probe		= spi_gpio_probe,
++	.remove		= __devexit_p(spi_gpio_remove),
+ };
+ 
+ static int __init spi_gpio_init(void)
+ {
+-	return platform_driver_probe(&spi_gpio_driver, spi_gpio_probe);
++	return platform_driver_register(&spi_gpio_driver);
+ }
+ module_init(spi_gpio_init);
+ 
diff --git a/target/linux/generic/patches-2.6.30/920-04-spi-gpio-implement-spi-delay.patch b/target/linux/generic/patches-2.6.30/920-04-spi-gpio-implement-spi-delay.patch
new file mode 100644
index 0000000000..19032881b8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/920-04-spi-gpio-implement-spi-delay.patch
@@ -0,0 +1,58 @@
+Implement the SPI-GPIO delay function for busses that need speed limitation.
+
+--mb
+
+
+
+--- a/drivers/spi/spi_gpio.c
++++ b/drivers/spi/spi_gpio.c
+@@ -21,6 +21,7 @@
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
+ #include <linux/gpio.h>
++#include <linux/delay.h>
+ 
+ #include <linux/spi/spi.h>
+ #include <linux/spi/spi_bitbang.h>
+@@ -69,6 +70,7 @@ struct spi_gpio {
+  *		#define	SPI_MOSI_GPIO	120
+  *		#define	SPI_SCK_GPIO	121
+  *		#define	SPI_N_CHIPSEL	4
++ *		#undef NEED_SPIDELAY
+  *		#include "spi_gpio.c"
+  */
+ 
+@@ -76,6 +78,7 @@ struct spi_gpio {
+ #define DRIVER_NAME	"spi_gpio"
+ 
+ #define GENERIC_BITBANG	/* vs tight inlines */
++#define NEED_SPIDELAY	1
+ 
+ /* all functions referencing these symbols must define pdata */
+ #define SPI_MISO_GPIO	((pdata)->miso)
+@@ -120,12 +123,20 @@ static inline int getmiso(const struct s
+ #undef pdata
+ 
+ /*
+- * NOTE:  this clocks "as fast as we can".  It "should" be a function of the
+- * requested device clock.  Software overhead means we usually have trouble
+- * reaching even one Mbit/sec (except when we can inline bitops), so for now
+- * we'll just assume we never need additional per-bit slowdowns.
++ * NOTE:  to clock "as fast as we can", set spi_device.max_speed_hz
++ * and spi_transfer.speed_hz to 0.
++ * Otherwise this is a function of the requested device clock.
++ * Software overhead means we usually have trouble
++ * reaching even one Mbit/sec (except when we can inline bitops). So on small
++ * embedded devices with fast SPI slaves you usually don't need a delay.
+  */
+-#define spidelay(nsecs)	do {} while (0)
++static inline void spidelay(unsigned nsecs)
++{
++#ifdef NEED_SPIDELAY
++	if (unlikely(nsecs))
++		ndelay(nsecs);
++#endif /* NEED_SPIDELAY */
++}
+ 
+ #define	EXPAND_BITBANG_TXRX
+ #include <linux/spi/spi_bitbang.h>
diff --git a/target/linux/generic/patches-2.6.30/921-gpio_spi_driver.patch b/target/linux/generic/patches-2.6.30/921-gpio_spi_driver.patch
new file mode 100644
index 0000000000..98b764d6f8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/921-gpio_spi_driver.patch
@@ -0,0 +1,366 @@
+THIS CODE IS DEPRECATED.
+
+Please use the new mainline SPI-GPIO driver, as of 2.6.29.
+
+--mb
+
+
+
+--- /dev/null
++++ b/include/linux/spi/spi_gpio_old.h
+@@ -0,0 +1,73 @@
++/*
++ * spi_gpio interface to platform code
++ *
++ * Copyright (c) 2008 Piotr Skamruk
++ * Copyright (c) 2008 Michael Buesch
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef _LINUX_SPI_SPI_GPIO
++#define _LINUX_SPI_SPI_GPIO
++
++#include <linux/types.h>
++#include <linux/spi/spi.h>
++
++
++/**
++ * struct spi_gpio_platform_data - Data definitions for a SPI-GPIO device.
++ *
++ * This structure holds information about a GPIO-based SPI device.
++ *
++ * @pin_clk: The GPIO pin number of the CLOCK pin.
++ *
++ * @pin_miso: The GPIO pin number of the MISO pin.
++ *
++ * @pin_mosi: The GPIO pin number of the MOSI pin.
++ *
++ * @pin_cs: The GPIO pin number of the CHIPSELECT pin.
++ *
++ * @cs_activelow: If true, the chip is selected when the CS line is low.
++ *
++ * @no_spi_delay: If true, no delay is done in the lowlevel bitbanging.
++ *                Note that doing no delay is not standards compliant,
++ *                but it might be needed to speed up transfers on some
++ *                slow embedded machines.
++ *
++ * @boardinfo_setup: This callback is called after the
++ *                   SPI master device was registered, but before the
++ *                   device is registered.
++ * @boardinfo_setup_data: Data argument passed to boardinfo_setup().
++ */
++struct spi_gpio_platform_data {
++	unsigned int pin_clk;
++	unsigned int pin_miso;
++	unsigned int pin_mosi;
++	unsigned int pin_cs;
++	bool cs_activelow;
++	bool no_spi_delay;
++	int (*boardinfo_setup)(struct spi_board_info *bi,
++			       struct spi_master *master,
++			       void *data);
++	void *boardinfo_setup_data;
++};
++
++/**
++ * SPI_GPIO_PLATDEV_NAME - The platform device name string.
++ *
++ * The name string that has to be used for platform_device_alloc
++ * when allocating a spi-gpio device.
++ */
++#define SPI_GPIO_PLATDEV_NAME	"spi-gpio"
++
++/**
++ * spi_gpio_next_id - Get another platform device ID number.
++ *
++ * This returns the next platform device ID number that has to be used
++ * for platform_device_alloc. The ID is opaque and should not be used for
++ * anything else.
++ */
++int spi_gpio_next_id(void);
++
++#endif /* _LINUX_SPI_SPI_GPIO */
+--- /dev/null
++++ b/drivers/spi/spi_gpio_old.c
+@@ -0,0 +1,251 @@
++/*
++ * Bitbanging SPI bus driver using GPIO API
++ *
++ * Copyright (c) 2008 Piotr Skamruk
++ * Copyright (c) 2008 Michael Buesch
++ *
++ * based on spi_s3c2410_gpio.c
++ *   Copyright (c) 2006 Ben Dooks
++ *   Copyright (c) 2006 Simtec Electronics
++ * and on i2c-gpio.c
++ *   Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/spinlock.h>
++#include <linux/workqueue.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_bitbang.h>
++#include <linux/spi/spi_gpio_old.h>
++#include <linux/gpio.h>
++#include <asm/atomic.h>
++
++
++struct spi_gpio {
++	struct spi_bitbang bitbang;
++	struct spi_gpio_platform_data *info;
++	struct platform_device *pdev;
++	struct spi_board_info bi;
++};
++
++
++static inline struct spi_gpio *spidev_to_sg(struct spi_device *dev)
++{
++	return dev->controller_data;
++}
++
++static inline void setsck(struct spi_device *dev, int val)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++	gpio_set_value(sp->info->pin_clk, val ? 1 : 0);
++}
++
++static inline void setmosi(struct spi_device *dev, int val)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++	gpio_set_value(sp->info->pin_mosi, val ? 1 : 0);
++}
++
++static inline u32 getmiso(struct spi_device *dev)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++	return gpio_get_value(sp->info->pin_miso) ? 1 : 0;
++}
++
++static inline void do_spidelay(struct spi_device *dev, unsigned nsecs)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++
++	if (!sp->info->no_spi_delay)
++		ndelay(nsecs);
++}
++
++#define spidelay(nsecs) do {					\
++	/* Steal the spi_device pointer from our caller.	\
++	 * The bitbang-API should probably get fixed here... */	\
++	do_spidelay(spi, nsecs);				\
++  } while (0)
++
++#define EXPAND_BITBANG_TXRX
++#include <linux/spi/spi_bitbang.h>
++
++static u32 spi_gpio_txrx_mode0(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
++}
++
++static u32 spi_gpio_txrx_mode1(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
++}
++
++static u32 spi_gpio_txrx_mode2(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
++}
++
++static u32 spi_gpio_txrx_mode3(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
++}
++
++static void spi_gpio_chipselect(struct spi_device *dev, int on)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++
++	if (sp->info->cs_activelow)
++		on = !on;
++	gpio_set_value(sp->info->pin_cs, on ? 1 : 0);
++}
++
++static int spi_gpio_probe(struct platform_device *pdev)
++{
++	struct spi_master *master;
++	struct spi_gpio_platform_data *pdata;
++	struct spi_gpio *sp;
++	struct spi_device *spidev;
++	int err;
++
++	pdata = pdev->dev.platform_data;
++	if (!pdata)
++		return -ENXIO;
++
++	err = -ENOMEM;
++	master = spi_alloc_master(&pdev->dev, sizeof(struct spi_gpio));
++	if (!master)
++		goto err_alloc_master;
++
++	sp = spi_master_get_devdata(master);
++	platform_set_drvdata(pdev, sp);
++	sp->info = pdata;
++
++	err = gpio_request(pdata->pin_clk, "spi_clock");
++	if (err)
++		goto err_request_clk;
++	err = gpio_request(pdata->pin_mosi, "spi_mosi");
++	if (err)
++		goto err_request_mosi;
++	err = gpio_request(pdata->pin_miso, "spi_miso");
++	if (err)
++		goto err_request_miso;
++	err = gpio_request(pdata->pin_cs, "spi_cs");
++	if (err)
++		goto err_request_cs;
++
++	sp->bitbang.master = spi_master_get(master);
++	sp->bitbang.master->bus_num = -1;
++	sp->bitbang.master->num_chipselect = 1;
++	sp->bitbang.chipselect = spi_gpio_chipselect;
++	sp->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_mode0;
++	sp->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_mode1;
++	sp->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_mode2;
++	sp->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_mode3;
++
++	gpio_direction_output(pdata->pin_clk, 0);
++	gpio_direction_output(pdata->pin_mosi, 0);
++	gpio_direction_output(pdata->pin_cs,
++			      pdata->cs_activelow ? 1 : 0);
++	gpio_direction_input(pdata->pin_miso);
++
++	err = spi_bitbang_start(&sp->bitbang);
++	if (err)
++		goto err_no_bitbang;
++	err = pdata->boardinfo_setup(&sp->bi, master,
++				     pdata->boardinfo_setup_data);
++	if (err)
++		goto err_bi_setup;
++	sp->bi.controller_data = sp;
++	spidev = spi_new_device(master, &sp->bi);
++	if (!spidev)
++		goto err_new_dev;
++
++	return 0;
++
++err_new_dev:
++err_bi_setup:
++	spi_bitbang_stop(&sp->bitbang);
++err_no_bitbang:
++	spi_master_put(sp->bitbang.master);
++	gpio_free(pdata->pin_cs);
++err_request_cs:
++	gpio_free(pdata->pin_miso);
++err_request_miso:
++	gpio_free(pdata->pin_mosi);
++err_request_mosi:
++	gpio_free(pdata->pin_clk);
++err_request_clk:
++	kfree(master);
++
++err_alloc_master:
++	return err;
++}
++
++static int __devexit spi_gpio_remove(struct platform_device *pdev)
++{
++	struct spi_gpio *sp;
++	struct spi_gpio_platform_data *pdata;
++
++	pdata = pdev->dev.platform_data;
++	sp = platform_get_drvdata(pdev);
++
++	gpio_free(pdata->pin_clk);
++	gpio_free(pdata->pin_mosi);
++	gpio_free(pdata->pin_miso);
++	gpio_free(pdata->pin_cs);
++	spi_bitbang_stop(&sp->bitbang);
++	spi_master_put(sp->bitbang.master);
++
++	return 0;
++}
++
++static struct platform_driver spi_gpio_driver = {
++	.driver		= {
++		.name	= SPI_GPIO_PLATDEV_NAME,
++		.owner	= THIS_MODULE,
++	},
++	.probe		= spi_gpio_probe,
++	.remove		= __devexit_p(spi_gpio_remove),
++};
++
++int spi_gpio_next_id(void)
++{
++	static atomic_t counter = ATOMIC_INIT(-1);
++
++	return atomic_inc_return(&counter);
++}
++EXPORT_SYMBOL(spi_gpio_next_id);
++
++static int __init spi_gpio_init(void)
++{
++	int err;
++
++	err = platform_driver_register(&spi_gpio_driver);
++	if (err)
++		printk(KERN_ERR "spi-gpio: register failed: %d\n", err);
++
++	return err;
++}
++module_init(spi_gpio_init);
++
++static void __exit spi_gpio_exit(void)
++{
++	platform_driver_unregister(&spi_gpio_driver);
++}
++module_exit(spi_gpio_exit);
++
++MODULE_AUTHOR("Piot Skamruk <piotr.skamruk at gmail.com>");
++MODULE_AUTHOR("Michael Buesch");
++MODULE_DESCRIPTION("Platform independent GPIO bitbanging SPI driver");
++MODULE_LICENSE("GPL v2");
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -116,6 +116,15 @@ config SPI_GPIO
+ 	  GPIO operations, you should be able to leverage that for better
+ 	  speed with a custom version of this driver; see the source code.
+ 
++config SPI_GPIO_OLD
++	tristate "Old GPIO API based bitbanging SPI controller (DEPRECATED)"
++	depends on SPI_MASTER && GENERIC_GPIO
++	select SPI_BITBANG
++	help
++	  This code is deprecated. Please use the new mainline SPI-GPIO driver.
++
++	  If unsure, say N.
++
+ config SPI_IMX
+ 	tristate "Freescale iMX SPI controller"
+ 	depends on ARCH_IMX && EXPERIMENTAL
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -17,6 +17,7 @@ obj-$(CONFIG_SPI_BITBANG)		+= spi_bitban
+ obj-$(CONFIG_SPI_AU1550)		+= au1550_spi.o
+ obj-$(CONFIG_SPI_BUTTERFLY)		+= spi_butterfly.o
+ obj-$(CONFIG_SPI_GPIO)			+= spi_gpio.o
++obj-$(CONFIG_SPI_GPIO_OLD)		+= spi_gpio_old.o
+ obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
+ obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
+ obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
diff --git a/target/linux/generic/patches-2.6.30/922-gpiommc.patch b/target/linux/generic/patches-2.6.30/922-gpiommc.patch
new file mode 100644
index 0000000000..c0a2159d86
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/922-gpiommc.patch
@@ -0,0 +1,838 @@
+--- /dev/null
++++ b/drivers/mmc/host/gpiommc.c
+@@ -0,0 +1,608 @@
++/*
++ * Driver an MMC/SD card on a bitbanging GPIO SPI bus.
++ * This module hooks up the mmc_spi and spi_gpio modules and also
++ * provides a configfs interface.
++ *
++ * Copyright 2008 Michael Buesch <mb@bu3sch.de>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include <linux/mmc/gpiommc.h>
++#include <linux/platform_device.h>
++#include <linux/list.h>
++#include <linux/mutex.h>
++#include <linux/spi/spi_gpio_old.h>
++#include <linux/configfs.h>
++#include <linux/gpio.h>
++#include <asm/atomic.h>
++
++
++#define PFX				"gpio-mmc: "
++
++
++struct gpiommc_device {
++	struct platform_device *pdev;
++	struct platform_device *spi_pdev;
++	struct spi_board_info boardinfo;
++};
++
++
++MODULE_DESCRIPTION("GPIO based MMC driver");
++MODULE_AUTHOR("Michael Buesch");
++MODULE_LICENSE("GPL");
++
++
++static int gpiommc_boardinfo_setup(struct spi_board_info *bi,
++				   struct spi_master *master,
++				   void *data)
++{
++	struct gpiommc_device *d = data;
++	struct gpiommc_platform_data *pdata = d->pdev->dev.platform_data;
++
++	/* Bind the SPI master to the MMC-SPI host driver. */
++	strlcpy(bi->modalias, "mmc_spi", sizeof(bi->modalias));
++
++	bi->max_speed_hz = pdata->max_bus_speed;
++	bi->bus_num = master->bus_num;
++	bi->mode = pdata->mode;
++
++	return 0;
++}
++
++static int gpiommc_probe(struct platform_device *pdev)
++{
++	struct gpiommc_platform_data *mmc_pdata = pdev->dev.platform_data;
++	struct spi_gpio_platform_data spi_pdata;
++	struct gpiommc_device *d;
++	int err;
++
++	err = -ENXIO;
++	if (!mmc_pdata)
++		goto error;
++
++#ifdef CONFIG_MMC_SPI_MODULE
++	err = request_module("mmc_spi");
++	if (err) {
++		printk(KERN_WARNING PFX
++		       "Failed to request mmc_spi module.\n");
++	}
++#endif /* CONFIG_MMC_SPI_MODULE */
++
++	/* Allocate the GPIO-MMC device */
++	err = -ENOMEM;
++	d = kzalloc(sizeof(*d), GFP_KERNEL);
++	if (!d)
++		goto error;
++	d->pdev = pdev;
++
++	/* Create the SPI-GPIO device */
++	d->spi_pdev = platform_device_alloc(SPI_GPIO_PLATDEV_NAME,
++					    spi_gpio_next_id());
++	if (!d->spi_pdev)
++		goto err_free_d;
++
++	memset(&spi_pdata, 0, sizeof(spi_pdata));
++	spi_pdata.pin_clk = mmc_pdata->pins.gpio_clk;
++	spi_pdata.pin_miso = mmc_pdata->pins.gpio_do;
++	spi_pdata.pin_mosi = mmc_pdata->pins.gpio_di;
++	spi_pdata.pin_cs = mmc_pdata->pins.gpio_cs;
++	spi_pdata.cs_activelow = mmc_pdata->pins.cs_activelow;
++	spi_pdata.no_spi_delay = mmc_pdata->no_spi_delay;
++	spi_pdata.boardinfo_setup = gpiommc_boardinfo_setup;
++	spi_pdata.boardinfo_setup_data = d;
++
++	err = platform_device_add_data(d->spi_pdev, &spi_pdata,
++				       sizeof(spi_pdata));
++	if (err)
++		goto err_free_pdev;
++	err = platform_device_add(d->spi_pdev);
++	if (err)
++		goto err_free_pdata;
++	platform_set_drvdata(pdev, d);
++
++	printk(KERN_INFO PFX "MMC-Card \"%s\" "
++	       "attached to GPIO pins di=%u, do=%u, clk=%u, cs=%u\n",
++	       mmc_pdata->name, mmc_pdata->pins.gpio_di,
++	       mmc_pdata->pins.gpio_do,
++	       mmc_pdata->pins.gpio_clk,
++	       mmc_pdata->pins.gpio_cs);
++
++	return 0;
++
++err_free_pdata:
++	kfree(d->spi_pdev->dev.platform_data);
++	d->spi_pdev->dev.platform_data = NULL;
++err_free_pdev:
++	platform_device_put(d->spi_pdev);
++err_free_d:
++	kfree(d);
++error:
++	return err;
++}
++
++static int gpiommc_remove(struct platform_device *pdev)
++{
++	struct gpiommc_device *d = platform_get_drvdata(pdev);
++	struct gpiommc_platform_data *pdata = d->pdev->dev.platform_data;
++
++	platform_device_unregister(d->spi_pdev);
++	printk(KERN_INFO PFX "GPIO based MMC-Card \"%s\" removed\n",
++	       pdata->name);
++	platform_device_put(d->spi_pdev);
++
++	return 0;
++}
++
++#ifdef CONFIG_GPIOMMC_CONFIGFS
++
++/* A device that was created through configfs */
++struct gpiommc_configfs_device {
++	struct config_item item;
++	/* The platform device, after registration. */
++	struct platform_device *pdev;
++	/* The configuration */
++	struct gpiommc_platform_data pdata;
++};
++
++#define GPIO_INVALID	-1
++
++static inline bool gpiommc_is_registered(struct gpiommc_configfs_device *dev)
++{
++	return (dev->pdev != NULL);
++}
++
++static inline struct gpiommc_configfs_device *ci_to_gpiommc(struct config_item *item)
++{
++	return item ? container_of(item, struct gpiommc_configfs_device, item) : NULL;
++}
++
++static struct configfs_attribute gpiommc_attr_DI = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_data_in",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_DO = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_data_out",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_CLK = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_clock",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_CS = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_chipselect",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_CS_activelow = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_chipselect_activelow",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_spimode = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "spi_mode",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_spidelay = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "spi_delay",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_max_bus_speed = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "max_bus_speed",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_register = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "register",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute *gpiommc_config_attrs[] = {
++	&gpiommc_attr_DI,
++	&gpiommc_attr_DO,
++	&gpiommc_attr_CLK,
++	&gpiommc_attr_CS,
++	&gpiommc_attr_CS_activelow,
++	&gpiommc_attr_spimode,
++	&gpiommc_attr_spidelay,
++	&gpiommc_attr_max_bus_speed,
++	&gpiommc_attr_register,
++	NULL,
++};
++
++static ssize_t gpiommc_config_attr_show(struct config_item *item,
++					struct configfs_attribute *attr,
++					char *page)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++	ssize_t count = 0;
++	unsigned int gpio;
++	int err = 0;
++
++	if (attr == &gpiommc_attr_DI) {
++		gpio = dev->pdata.pins.gpio_di;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_DO) {
++		gpio = dev->pdata.pins.gpio_do;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CLK) {
++		gpio = dev->pdata.pins.gpio_clk;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS) {
++		gpio = dev->pdata.pins.gpio_cs;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS_activelow) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 dev->pdata.pins.cs_activelow);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spimode) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 dev->pdata.mode);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spidelay) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 !dev->pdata.no_spi_delay);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_max_bus_speed) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 dev->pdata.max_bus_speed);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_register) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 gpiommc_is_registered(dev));
++		goto out;
++	}
++	WARN_ON(1);
++	err = -ENOSYS;
++out:
++	return err ? err : count;
++}
++
++static int gpiommc_do_register(struct gpiommc_configfs_device *dev,
++			       const char *name)
++{
++	int err;
++
++	if (gpiommc_is_registered(dev))
++		return 0;
++
++	if (!gpio_is_valid(dev->pdata.pins.gpio_di) ||
++	    !gpio_is_valid(dev->pdata.pins.gpio_do) ||
++	    !gpio_is_valid(dev->pdata.pins.gpio_clk) ||
++	    !gpio_is_valid(dev->pdata.pins.gpio_cs)) {
++		printk(KERN_ERR PFX
++		       "configfs: Invalid GPIO pin number(s)\n");
++		return -EINVAL;
++	}
++
++	strlcpy(dev->pdata.name, name,
++		sizeof(dev->pdata.name));
++
++	dev->pdev = platform_device_alloc(GPIOMMC_PLATDEV_NAME,
++					  gpiommc_next_id());
++	if (!dev->pdev)
++		return -ENOMEM;
++	err = platform_device_add_data(dev->pdev, &dev->pdata,
++				       sizeof(dev->pdata));
++	if (err) {
++		platform_device_put(dev->pdev);
++		return err;
++	}
++	err = platform_device_add(dev->pdev);
++	if (err) {
++		platform_device_put(dev->pdev);
++		return err;
++	}
++
++	return 0;
++}
++
++static void gpiommc_do_unregister(struct gpiommc_configfs_device *dev)
++{
++	if (!gpiommc_is_registered(dev))
++		return;
++
++	platform_device_unregister(dev->pdev);
++	dev->pdev = NULL;
++}
++
++static ssize_t gpiommc_config_attr_store(struct config_item *item,
++					 struct configfs_attribute *attr,
++					 const char *page, size_t count)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++	int err = -EINVAL;
++	unsigned long data;
++
++	if (attr == &gpiommc_attr_register) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data == 1)
++			err = gpiommc_do_register(dev, item->ci_name);
++		if (data == 0) {
++			gpiommc_do_unregister(dev);
++			err = 0;
++		}
++		goto out;
++	}
++
++	if (gpiommc_is_registered(dev)) {
++		/* The rest of the config parameters can only be set
++		 * as long as the device is not registered, yet. */
++		err = -EBUSY;
++		goto out;
++	}
++
++	if (attr == &gpiommc_attr_DI) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_di = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_DO) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_do = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CLK) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_clk = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_cs = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS_activelow) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data != 0 && data != 1)
++			goto out;
++		dev->pdata.pins.cs_activelow = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spimode) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		switch (data) {
++		case 0:
++			dev->pdata.mode = SPI_MODE_0;
++			break;
++		case 1:
++			dev->pdata.mode = SPI_MODE_1;
++			break;
++		case 2:
++			dev->pdata.mode = SPI_MODE_2;
++			break;
++		case 3:
++			dev->pdata.mode = SPI_MODE_3;
++			break;
++		default:
++			goto out;
++		}
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spidelay) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data != 0 && data != 1)
++			goto out;
++		dev->pdata.no_spi_delay = !data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_max_bus_speed) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data > UINT_MAX)
++			goto out;
++		dev->pdata.max_bus_speed = data;
++		err = 0;
++		goto out;
++	}
++	WARN_ON(1);
++	err = -ENOSYS;
++out:
++	return err ? err : count;
++}
++
++static void gpiommc_config_item_release(struct config_item *item)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++
++	kfree(dev);
++}
++
++static struct configfs_item_operations gpiommc_config_item_ops = {
++	.release		= gpiommc_config_item_release,
++	.show_attribute		= gpiommc_config_attr_show,
++	.store_attribute	= gpiommc_config_attr_store,
++};
++
++static struct config_item_type gpiommc_dev_ci_type = {
++	.ct_item_ops	= &gpiommc_config_item_ops,
++	.ct_attrs	= gpiommc_config_attrs,
++	.ct_owner	= THIS_MODULE,
++};
++
++static struct config_item *gpiommc_make_item(struct config_group *group,
++					     const char *name)
++{
++	struct gpiommc_configfs_device *dev;
++
++	if (strlen(name) > GPIOMMC_MAX_NAMELEN) {
++		printk(KERN_ERR PFX "configfs: device name too long\n");
++		return NULL;
++	}
++
++	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
++	if (!dev)
++		return NULL;
++
++	config_item_init_type_name(&dev->item, name,
++				   &gpiommc_dev_ci_type);
++
++	/* Assign default configuration */
++	dev->pdata.pins.gpio_di = GPIO_INVALID;
++	dev->pdata.pins.gpio_do = GPIO_INVALID;
++	dev->pdata.pins.gpio_clk = GPIO_INVALID;
++	dev->pdata.pins.gpio_cs = GPIO_INVALID;
++	dev->pdata.pins.cs_activelow = 1;
++	dev->pdata.mode = SPI_MODE_0;
++	dev->pdata.no_spi_delay = 0;
++	dev->pdata.max_bus_speed = 5000000; /* 5 MHz */
++
++	return &(dev->item);
++}
++
++static void gpiommc_drop_item(struct config_group *group,
++			      struct config_item *item)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++
++	gpiommc_do_unregister(dev);
++	kfree(dev);
++}
++
++static struct configfs_group_operations gpiommc_ct_group_ops = {
++	.make_item	= gpiommc_make_item,
++	.drop_item	= gpiommc_drop_item,
++};
++
++static struct config_item_type gpiommc_ci_type = {
++	.ct_group_ops	= &gpiommc_ct_group_ops,
++	.ct_owner	= THIS_MODULE,
++};
++
++static struct configfs_subsystem gpiommc_subsys = {
++	.su_group = {
++		.cg_item = {
++			.ci_namebuf = GPIOMMC_PLATDEV_NAME,
++			.ci_type = &gpiommc_ci_type,
++		},
++	},
++	.su_mutex = __MUTEX_INITIALIZER(gpiommc_subsys.su_mutex),
++};
++
++#endif /* CONFIG_GPIOMMC_CONFIGFS */
++
++static struct platform_driver gpiommc_plat_driver = {
++	.probe	= gpiommc_probe,
++	.remove	= gpiommc_remove,
++	.driver	= {
++		.name	= GPIOMMC_PLATDEV_NAME,
++		.owner	= THIS_MODULE,
++	},
++};
++
++int gpiommc_next_id(void)
++{
++	static atomic_t counter = ATOMIC_INIT(-1);
++
++	return atomic_inc_return(&counter);
++}
++EXPORT_SYMBOL(gpiommc_next_id);
++
++static int __init gpiommc_modinit(void)
++{
++	int err;
++
++	err = platform_driver_register(&gpiommc_plat_driver);
++	if (err)
++		return err;
++
++#ifdef CONFIG_GPIOMMC_CONFIGFS
++	config_group_init(&gpiommc_subsys.su_group);
++	err = configfs_register_subsystem(&gpiommc_subsys);
++	if (err) {
++		platform_driver_unregister(&gpiommc_plat_driver);
++		return err;
++	}
++#endif /* CONFIG_GPIOMMC_CONFIGFS */
++
++	return 0;
++}
++module_init(gpiommc_modinit);
++
++static void __exit gpiommc_modexit(void)
++{
++#ifdef CONFIG_GPIOMMC_CONFIGFS
++	configfs_unregister_subsystem(&gpiommc_subsys);
++#endif
++	platform_driver_unregister(&gpiommc_plat_driver);
++}
++module_exit(gpiommc_modexit);
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -241,3 +241,28 @@ config MMC_TMIO
+ 	help
+ 	  This provides support for the SD/MMC cell found in TC6393XB,
+ 	  T7L66XB and also ipaq ASIC3
++
++config GPIOMMC
++	tristate "MMC/SD over GPIO-based SPI"
++	depends on MMC && MMC_SPI && SPI_GPIO_OLD
++	help
++	  This driver hooks up the mmc_spi and spi_gpio modules so that
++	  MMC/SD cards can be used on a GPIO based bus by bitbanging
++	  the SPI protocol in software.
++
++	  This driver provides a configfs interface to dynamically create
++	  and destroy GPIO-based MMC/SD card devices. It also provides
++	  a platform device interface API.
++	  See Documentation/gpiommc.txt for details.
++
++	  The module will be called gpiommc.
++
++	  If unsure, say N.
++
++config GPIOMMC_CONFIGFS
++	bool
++	depends on GPIOMMC && CONFIGFS_FS
++	default y
++	help
++	  This option automatically enables configfs support for gpiommc
++	  if configfs is available.
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -29,4 +29,5 @@ endif
+ obj-$(CONFIG_MMC_S3C)   	+= s3cmci.o
+ obj-$(CONFIG_MMC_SDRICOH_CS)	+= sdricoh_cs.o
+ obj-$(CONFIG_MMC_TMIO)		+= tmio_mmc.o
++obj-$(CONFIG_GPIOMMC)		+= gpiommc.o
+ 
+--- /dev/null
++++ b/include/linux/mmc/gpiommc.h
+@@ -0,0 +1,71 @@
++/*
++ * Device driver for MMC/SD cards driven over a GPIO bus.
++ *
++ * Copyright (c) 2008 Michael Buesch
++ *
++ * Licensed under the GNU/GPL version 2.
++ */
++#ifndef LINUX_GPIOMMC_H_
++#define LINUX_GPIOMMC_H_
++
++#include <linux/types.h>
++
++
++#define GPIOMMC_MAX_NAMELEN		15
++#define GPIOMMC_MAX_NAMELEN_STR		__stringify(GPIOMMC_MAX_NAMELEN)
++
++/**
++ * struct gpiommc_pins - Hardware pin assignments
++ *
++ * @gpio_di: The GPIO number of the DATA IN pin
++ * @gpio_do: The GPIO number of the DATA OUT pin
++ * @gpio_clk: The GPIO number of the CLOCK pin
++ * @gpio_cs: The GPIO number of the CHIPSELECT pin
++ * @cs_activelow: If true, the chip is considered selected if @gpio_cs is low.
++ */
++struct gpiommc_pins {
++	unsigned int gpio_di;
++	unsigned int gpio_do;
++	unsigned int gpio_clk;
++	unsigned int gpio_cs;
++	bool cs_activelow;
++};
++
++/**
++ * struct gpiommc_platform_data - Platform data for a MMC-over-SPI-GPIO device.
++ *
++ * @name: The unique name string of the device.
++ * @pins: The hardware pin assignments.
++ * @mode: The hardware mode. This is either SPI_MODE_0,
++ *        SPI_MODE_1, SPI_MODE_2 or SPI_MODE_3. See the SPI documentation.
++ * @no_spi_delay: Do not use delays in the lowlevel SPI bitbanging code.
++ *                This is not standards compliant, but may be required for some
++ *                embedded machines to gain reasonable speed.
++ * @max_bus_speed: The maximum speed of the SPI bus, in Hertz.
++ */
++struct gpiommc_platform_data {
++	char name[GPIOMMC_MAX_NAMELEN + 1];
++	struct gpiommc_pins pins;
++	u8 mode;
++	bool no_spi_delay;
++	unsigned int max_bus_speed;
++};
++
++/**
++ * GPIOMMC_PLATDEV_NAME - The platform device name string.
++ *
++ * The name string that has to be used for platform_device_alloc
++ * when allocating a gpiommc device.
++ */
++#define GPIOMMC_PLATDEV_NAME	"gpiommc"
++
++/**
++ * gpiommc_next_id - Get another platform device ID number.
++ *
++ * This returns the next platform device ID number that has to be used
++ * for platform_device_alloc. The ID is opaque and should not be used for
++ * anything else.
++ */
++int gpiommc_next_id(void);
++
++#endif /* LINUX_GPIOMMC_H_ */
+--- /dev/null
++++ b/Documentation/gpiommc.txt
+@@ -0,0 +1,97 @@
++GPIOMMC - Driver for an MMC/SD card on a bitbanging GPIO SPI bus
++================================================================
++
++The gpiommc module hooks up the mmc_spi and spi_gpio modules for running an
++MMC or SD card on GPIO pins.
++
++Two interfaces for registering a new MMC/SD card device are provided:
++A static platform-device based mechanism and a dynamic configfs based interface.
++
++
++Registering devices via platform-device
++=======================================
++
++The platform-device interface is used for registering MMC/SD devices that are
++part of the hardware platform. This is most useful only for embedded machines
++with MMC/SD devices statically connected to the platform GPIO bus.
++
++The data structures are declared in <linux/mmc/gpiommc.h>.
++
++To register a new device, define an instance of struct gpiommc_platform_data.
++This structure holds any information about how the device is hooked up to the
++GPIO pins and what hardware modes the device supports. See the docbook-style
++documentation in the header file for more information on the struct fields.
++
++Then allocate a new instance of a platform device by doing:
++
++	pdev = platform_device_alloc(GPIOMMC_PLATDEV_NAME, gpiommc_next_id());
++
++This will allocate the platform device data structures and hook it up to the
++gpiommc driver.
++Then add the gpiommc_platform_data to the platform device.
++
++	err = platform_device_add_data(pdev, pdata, sizeof(struct gpiommc_platform_data));
++
++You may free the local instance of struct gpiommc_platform_data now. (So the
++struct may be allocated on the stack, too).
++Now simply register the platform device.
++
++	err = platform_device_add(pdev);
++
++Done. The gpiommc probe routine will be invoked now and you should see a kernel
++log message for the added device.
++
++
++Registering devices via configfs
++================================
++
++MMC/SD cards connected via GPIO often are a pretty dynamic thing, as for example
++selfmade hacks for soldering an MMC/SD card to standard GPIO pins on embedded
++hardware are a common situation.
++So we provide a dynamic interface to conveniently handle adding and removing
++devices from userspace, without the need to recompile the kernel.
++
++The "gpiommc" subdirectory at the configfs mountpoint is used for handling
++the dynamic configuration.
++
++To create a new device, it must first be allocated with mkdir.
++The following command will allocate a device named "my_mmc":
++	mkdir /config/gpiommc/my_mmc
++
++There are several configuration files available in the new
++/config/gpiommc/my_mmc/ directory:
++
++gpio_data_in			= The SPI data-IN GPIO pin number.
++gpio_data_out			= The SPI data-OUT GPIO pin number.
++gpio_clock			= The SPI Clock GPIO pin number.
++gpio_chipselect			= The SPI Chipselect GPIO pin number.
++gpio_chipselect_activelow	= Boolean. If 0, Chipselect is active-HIGH.
++				  If 1, Chipselect is active-LOW.
++spi_mode			= The SPI data mode. Can be 0-3.
++spi_delay			= Enable all delays in the lowlevel bitbanging.
++max_bus_speed			= The maximum SPI bus speed. In Hertz.
++
++register			= Not a configuration parameter.
++				  Used to register the configured card
++				  with the kernel.
++
++The device must first get configured and then registered by writing "1" to
++the "register" file.
++The configuration parameters "gpio_data_in", "gpio_data_out", "gpio_clock"
++and "gpio_chipselect" are essential and _must_ be configured before writing
++"1" to the "register" file. The registration will fail, otherwise.
++
++The default values for the other parameters are:
++gpio_chipselect_activelow	= 1		(CS active-LOW)
++spi_mode			= 0		(SPI_MODE_0)
++spi_delay			= 1		(enabled)
++max_bus_speed			= 5000000	(5 Mhz)
++
++Configuration values can not be changed after registration. To unregister
++the device, write a "0" to the "register" file. The configuration can be
++changed again after unregistering.
++
++To completely remove the device, simply rmdir the directory
++(/config/gpiommc/my_mmc in this example).
++There's no need to first unregister the device before removing it. That will
++be done automatically.
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -2504,6 +2504,11 @@ T:	git git://git.kernel.org/pub/scm/linu
+ S:	Maintained
+ F:	drivers/media/video/gspca/
+ 
++GPIOMMC DRIVER
++P:	Michael Buesch
++M:	mb@bu3sch.de
++S:	Maintained
++
+ HARDWARE MONITORING
+ L:	lm-sensors@lm-sensors.org
+ W:	http://www.lm-sensors.org/
diff --git a/target/linux/generic/patches-2.6.30/923-gpiommc-configfs-locking.patch b/target/linux/generic/patches-2.6.30/923-gpiommc-configfs-locking.patch
new file mode 100644
index 0000000000..2e4e820b2b
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/923-gpiommc-configfs-locking.patch
@@ -0,0 +1,58 @@
+The gpiommc configfs context structure needs locking, as configfs
+does not lock access between files.
+
+--- a/drivers/mmc/host/gpiommc.c
++++ b/drivers/mmc/host/gpiommc.c
+@@ -143,6 +143,8 @@ struct gpiommc_configfs_device {
+ 	struct platform_device *pdev;
+ 	/* The configuration */
+ 	struct gpiommc_platform_data pdata;
++	/* Mutex to protect this structure */
++	struct mutex mutex;
+ };
+ 
+ #define GPIO_INVALID	-1
+@@ -233,6 +235,8 @@ static ssize_t gpiommc_config_attr_show(
+ 	unsigned int gpio;
+ 	int err = 0;
+ 
++	mutex_lock(&dev->mutex);
++
+ 	if (attr == &gpiommc_attr_DI) {
+ 		gpio = dev->pdata.pins.gpio_di;
+ 		if (gpio == GPIO_INVALID)
+@@ -293,6 +297,8 @@ static ssize_t gpiommc_config_attr_show(
+ 	WARN_ON(1);
+ 	err = -ENOSYS;
+ out:
++	mutex_unlock(&dev->mutex);
++
+ 	return err ? err : count;
+ }
+ 
+@@ -352,6 +358,8 @@ static ssize_t gpiommc_config_attr_store
+ 	int err = -EINVAL;
+ 	unsigned long data;
+ 
++	mutex_lock(&dev->mutex);
++
+ 	if (attr == &gpiommc_attr_register) {
+ 		err = strict_strtoul(page, 10, &data);
+ 		if (err)
+@@ -477,6 +485,8 @@ static ssize_t gpiommc_config_attr_store
+ 	WARN_ON(1);
+ 	err = -ENOSYS;
+ out:
++	mutex_unlock(&dev->mutex);
++
+ 	return err ? err : count;
+ }
+ 
+@@ -513,6 +523,7 @@ static struct config_item *gpiommc_make_
+ 	if (!dev)
+ 		return NULL;
+ 
++	mutex_init(&dev->mutex);
+ 	config_item_init_type_name(&dev->item, name,
+ 				   &gpiommc_dev_ci_type);
+ 
diff --git a/target/linux/generic/patches-2.6.30/924-cs5535_gpio.patch b/target/linux/generic/patches-2.6.30/924-cs5535_gpio.patch
new file mode 100644
index 0000000000..453affe583
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/924-cs5535_gpio.patch
@@ -0,0 +1,102 @@
+--- a/drivers/char/cs5535_gpio.c
++++ b/drivers/char/cs5535_gpio.c
+@@ -15,6 +15,7 @@
+ #include <linux/kernel.h>
+ #include <linux/init.h>
+ #include <linux/cdev.h>
++#include <linux/device.h>
+ #include <linux/ioport.h>
+ #include <linux/pci.h>
+ #include <linux/smp_lock.h>
+@@ -48,6 +49,7 @@ static struct pci_device_id divil_pci[] 
+ MODULE_DEVICE_TABLE(pci, divil_pci);
+ 
+ static struct cdev cs5535_gpio_cdev;
++static struct class *cs5535_gpio_class;
+ 
+ /* reserve 32 entries even though some aren't usable */
+ #define CS5535_GPIO_COUNT	32
+@@ -66,9 +68,14 @@ static struct gpio_regmap rm[] =
+ 	{ 0x30, 0x00, '1', '0' },	/* GPIOx_READ_BACK / GPIOx_OUT_VAL */
+ 	{ 0x20, 0x20, 'I', 'i' },	/* GPIOx_IN_EN */
+ 	{ 0x04, 0x04, 'O', 'o' },	/* GPIOx_OUT_EN */
++	{ 0x10, 0x10, 'A', 'a' },	/* GPIOx_OUT_AUX1_SEL */
++	{ 0x14, 0x14, 'B', 'b' },	/* GPIOx_OUT_AUX2_SEL */
+ 	{ 0x08, 0x08, 't', 'T' },	/* GPIOx_OUT_OD_EN */
+ 	{ 0x18, 0x18, 'P', 'p' },	/* GPIOx_OUT_PU_EN */
+ 	{ 0x1c, 0x1c, 'D', 'd' },	/* GPIOx_OUT_PD_EN */
++	{ 0x24, 0x24, 'N', 'n' },	/* GPIOx_IN_INV_EN */
++	{ 0x0c, 0x0c, 'X', 'x' },	/* GPIOx_OUT_INV_EN */
++	{ 0x00, 0x00, 'H', 'L' },	/* GPIOx_OUT_VAL */
+ };
+ 
+ 
+@@ -177,7 +184,7 @@ static int __init cs5535_gpio_init(void)
+ {
+ 	dev_t	dev_id;
+ 	u32	low, hi;
+-	int	retval;
++	int	retval, i;
+ 
+ 	if (pci_dev_present(divil_pci) == 0) {
+ 		printk(KERN_WARNING NAME ": DIVIL not found\n");
+@@ -232,23 +239,54 @@ static int __init cs5535_gpio_init(void)
+ 		major = MAJOR(dev_id);
+ 	}
+ 
+-	if (retval) {
+-		release_region(gpio_base, CS5535_GPIO_SIZE);
+-		return -1;
+-	}
++	if (retval)
++		goto error;
+ 
+ 	printk(KERN_DEBUG NAME ": base=%#x mask=%#lx major=%d\n",
+ 	       gpio_base, mask, major);
+ 
+ 	cdev_init(&cs5535_gpio_cdev, &cs5535_gpio_fops);
+-	cdev_add(&cs5535_gpio_cdev, dev_id, CS5535_GPIO_COUNT);
++	retval = cdev_add(&cs5535_gpio_cdev, dev_id, CS5535_GPIO_COUNT);
++	if (retval) {
++		kobject_put(&cs5535_gpio_cdev.kobj);
++		goto error_region;
++	}
++
++	cs5535_gpio_class = class_create(THIS_MODULE, "cs5535_gpio");
++	if (IS_ERR(cs5535_gpio_class)) {
++		printk(KERN_ERR "Error creating cs5535_gpio class\n");
++		cdev_del(&cs5535_gpio_cdev);
++		retval = PTR_ERR(cs5535_gpio_class);
++		goto error_region;
++	}
++
++	for (i = 0; i < CS5535_GPIO_COUNT; i++) {
++		if (mask & (1<<i)) {
++			device_create(cs5535_gpio_class, NULL, MKDEV(major, i), NULL, "cs5535_gpio%d", i);
++		}
++	}
+ 
+ 	return 0;
++
++error_region:
++	unregister_chrdev_region(dev_id, CS5535_GPIO_COUNT);
++error:
++	release_region(gpio_base, CS5535_GPIO_SIZE);
++	return retval;
+ }
+ 
+ static void __exit cs5535_gpio_cleanup(void)
+ {
+ 	dev_t dev_id = MKDEV(major, 0);
++	int i;
++
++	for (i = 0; i < CS5535_GPIO_COUNT; i++) {
++		if (mask & (1<<i)) {
++			device_destroy(cs5535_gpio_class, MKDEV(major, i));
++		}
++	}
++
++	class_destroy(cs5535_gpio_class);
+ 
+ 	cdev_del(&cs5535_gpio_cdev);
+ 	unregister_chrdev_region(dev_id, CS5535_GPIO_COUNT);
diff --git a/target/linux/generic/patches-2.6.30/925-modify-i2c-gpio-initcall-level.patch b/target/linux/generic/patches-2.6.30/925-modify-i2c-gpio-initcall-level.patch
new file mode 100644
index 0000000000..1708e33d01
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/925-modify-i2c-gpio-initcall-level.patch
@@ -0,0 +1,11 @@
+--- a/drivers/i2c/busses/i2c-gpio.c
++++ b/drivers/i2c/busses/i2c-gpio.c
+@@ -210,7 +210,7 @@ static int __init i2c_gpio_init(void)
+ 
+ 	return ret;
+ }
+-module_init(i2c_gpio_init);
++subsys_initcall(i2c_gpio_init);
+ 
+ static void __exit i2c_gpio_exit(void)
+ {
diff --git a/target/linux/generic/patches-2.6.30/940-wireless_mesh_header.patch b/target/linux/generic/patches-2.6.30/940-wireless_mesh_header.patch
new file mode 100644
index 0000000000..202f998dde
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/940-wireless_mesh_header.patch
@@ -0,0 +1,22 @@
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -99,7 +99,7 @@ struct wireless_dev;
+  */
+ 
+ #if defined(CONFIG_WLAN_80211) || defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
+-# if defined(CONFIG_MAC80211_MESH)
++# if 1 || defined(CONFIG_MAC80211_MESH)
+ #  define LL_MAX_HEADER 128
+ # else
+ #  define LL_MAX_HEADER 96
+--- a/include/linux/skbuff.h
++++ b/include/linux/skbuff.h
+@@ -387,7 +387,7 @@ struct sk_buff {
+ #ifdef CONFIG_IPV6_NDISC_NODETYPE
+ 	__u8			ndisc_nodetype:2;
+ #endif
+-#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE)
++#if 1
+ 	__u8			do_not_encrypt:1;
+ 	__u8			requeue:1;
+ #endif
diff --git a/target/linux/generic/patches-2.6.30/941-ssb_update.patch b/target/linux/generic/patches-2.6.30/941-ssb_update.patch
new file mode 100644
index 0000000000..391fbba876
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/941-ssb_update.patch
@@ -0,0 +1,1680 @@
+--- a/drivers/ssb/driver_chipcommon_pmu.c
++++ b/drivers/ssb/driver_chipcommon_pmu.c
+@@ -28,6 +28,21 @@ static void ssb_chipco_pll_write(struct 
+ 	chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value);
+ }
+ 
++static void ssb_chipco_regctl_maskset(struct ssb_chipcommon *cc,
++				   u32 offset, u32 mask, u32 set)
++{
++	u32 value;
++
++	chipco_read32(cc, SSB_CHIPCO_REGCTL_ADDR);
++	chipco_write32(cc, SSB_CHIPCO_REGCTL_ADDR, offset);
++	chipco_read32(cc, SSB_CHIPCO_REGCTL_ADDR);
++	value = chipco_read32(cc, SSB_CHIPCO_REGCTL_DATA);
++	value &= mask;
++	value |= set;
++	chipco_write32(cc, SSB_CHIPCO_REGCTL_DATA, value);
++	chipco_read32(cc, SSB_CHIPCO_REGCTL_DATA);
++}
++
+ struct pmu0_plltab_entry {
+ 	u16 freq;	/* Crystal frequency in kHz.*/
+ 	u8 xf;		/* Crystal frequency value for PMU control */
+@@ -317,6 +332,12 @@ static void ssb_pmu_pll_init(struct ssb_
+ 	case 0x5354:
+ 		ssb_pmu0_pllinit_r0(cc, crystalfreq);
+ 		break;
++	case 0x4322:
++		if (cc->pmu.rev == 2) {
++			chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, 0x0000000A);
++			chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, 0x380005C0);
++		}
++		break;
+ 	default:
+ 		ssb_printk(KERN_ERR PFX
+ 			   "ERROR: PLL init unknown for device %04X\n",
+@@ -402,6 +423,7 @@ static void ssb_pmu_resources_init(struc
+ 
+ 	switch (bus->chip_id) {
+ 	case 0x4312:
++	case 0x4322:
+ 		/* We keep the default settings:
+ 		 * min_msk = 0xCBB
+ 		 * max_msk = 0x7FFFF
+@@ -506,3 +528,82 @@ void ssb_pmu_init(struct ssb_chipcommon 
+ 	ssb_pmu_pll_init(cc);
+ 	ssb_pmu_resources_init(cc);
+ }
++
++void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
++			     enum ssb_pmu_ldo_volt_id id, u32 voltage)
++{
++	struct ssb_bus *bus = cc->dev->bus;
++	u32 addr, shift, mask;
++
++	switch (bus->chip_id) {
++	case 0x4328:
++	case 0x5354:
++		switch (id) {
++		case LDO_VOLT1:
++			addr = 2;
++			shift = 25;
++			mask = 0xF;
++			break;
++		case LDO_VOLT2:
++			addr = 3;
++			shift = 1;
++			mask = 0xF;
++			break;
++		case LDO_VOLT3:
++			addr = 3;
++			shift = 9;
++			mask = 0xF;
++			break;
++		case LDO_PAREF:
++			addr = 3;
++			shift = 17;
++			mask = 0x3F;
++			break;
++		default:
++			SSB_WARN_ON(1);
++			return;
++		}
++		break;
++	case 0x4312:
++		if (SSB_WARN_ON(id != LDO_PAREF))
++			return;
++		addr = 0;
++		shift = 21;
++		mask = 0x3F;
++		break;
++	default:
++		return;
++	}
++
++	ssb_chipco_regctl_maskset(cc, addr, ~(mask << shift),
++				  (voltage & mask) << shift);
++}
++
++void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on)
++{
++	struct ssb_bus *bus = cc->dev->bus;
++	int ldo;
++
++	switch (bus->chip_id) {
++	case 0x4312:
++		ldo = SSB_PMURES_4312_PA_REF_LDO;
++		break;
++	case 0x4328:
++		ldo = SSB_PMURES_4328_PA_REF_LDO;
++		break;
++	case 0x5354:
++		ldo = SSB_PMURES_5354_PA_REF_LDO;
++		break;
++	default:
++		return;
++	}
++
++	if (on)
++		chipco_set32(cc, SSB_CHIPCO_PMU_MINRES_MSK, 1 << ldo);
++	else
++		chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, ~(1 << ldo));
++	chipco_read32(cc, SSB_CHIPCO_PMU_MINRES_MSK); //SPEC FIXME found via mmiotrace - dummy read?
++}
++
++EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage);
++EXPORT_SYMBOL(ssb_pmu_set_ldo_paref);
+--- a/drivers/ssb/main.c
++++ b/drivers/ssb/main.c
+@@ -120,6 +120,19 @@ static void ssb_device_put(struct ssb_de
+ 		put_device(dev->dev);
+ }
+ 
++static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv)
++{
++	if (drv)
++		get_driver(&drv->drv);
++	return drv;
++}
++
++static inline void ssb_driver_put(struct ssb_driver *drv)
++{
++	if (drv)
++		put_driver(&drv->drv);
++}
++
+ static int ssb_device_resume(struct device *dev)
+ {
+ 	struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
+@@ -190,90 +203,81 @@ int ssb_bus_suspend(struct ssb_bus *bus)
+ EXPORT_SYMBOL(ssb_bus_suspend);
+ 
+ #ifdef CONFIG_SSB_SPROM
+-int ssb_devices_freeze(struct ssb_bus *bus)
++/** ssb_devices_freeze - Freeze all devices on the bus.
++ *
++ * After freezing no device driver will be handling a device
++ * on this bus anymore. ssb_devices_thaw() must be called after
++ * a successful freeze to reactivate the devices.
++ *
++ * @bus: The bus.
++ * @ctx: Context structure. Pass this to ssb_devices_thaw().
++ */
++int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx)
+ {
+-	struct ssb_device *dev;
+-	struct ssb_driver *drv;
+-	int err = 0;
+-	int i;
+-	pm_message_t state = PMSG_FREEZE;
++	struct ssb_device *sdev;
++	struct ssb_driver *sdrv;
++	unsigned int i;
++
++	memset(ctx, 0, sizeof(*ctx));
++	ctx->bus = bus;
++	SSB_WARN_ON(bus->nr_devices > ARRAY_SIZE(ctx->device_frozen));
+ 
+-	/* First check that we are capable to freeze all devices. */
+ 	for (i = 0; i < bus->nr_devices; i++) {
+-		dev = &(bus->devices[i]);
+-		if (!dev->dev ||
+-		    !dev->dev->driver ||
+-		    !device_is_registered(dev->dev))
+-			continue;
+-		drv = drv_to_ssb_drv(dev->dev->driver);
+-		if (!drv)
++		sdev = ssb_device_get(&bus->devices[i]);
++
++		if (!sdev->dev || !sdev->dev->driver ||
++		    !device_is_registered(sdev->dev)) {
++			ssb_device_put(sdev);
+ 			continue;
+-		if (!drv->suspend) {
+-			/* Nope, can't suspend this one. */
+-			return -EOPNOTSUPP;
+ 		}
+-	}
+-	/* Now suspend all devices */
+-	for (i = 0; i < bus->nr_devices; i++) {
+-		dev = &(bus->devices[i]);
+-		if (!dev->dev ||
+-		    !dev->dev->driver ||
+-		    !device_is_registered(dev->dev))
+-			continue;
+-		drv = drv_to_ssb_drv(dev->dev->driver);
+-		if (!drv)
++		sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver));
++		if (!sdrv || SSB_WARN_ON(!sdrv->remove)) {
++			ssb_device_put(sdev);
+ 			continue;
+-		err = drv->suspend(dev, state);
+-		if (err) {
+-			ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n",
+-				   dev_name(dev->dev));
+-			goto err_unwind;
+ 		}
++		sdrv->remove(sdev);
++		ctx->device_frozen[i] = 1;
+ 	}
+ 
+ 	return 0;
+-err_unwind:
+-	for (i--; i >= 0; i--) {
+-		dev = &(bus->devices[i]);
+-		if (!dev->dev ||
+-		    !dev->dev->driver ||
+-		    !device_is_registered(dev->dev))
+-			continue;
+-		drv = drv_to_ssb_drv(dev->dev->driver);
+-		if (!drv)
+-			continue;
+-		if (drv->resume)
+-			drv->resume(dev);
+-	}
+-	return err;
+ }
+ 
+-int ssb_devices_thaw(struct ssb_bus *bus)
++/** ssb_devices_thaw - Unfreeze all devices on the bus.
++ *
++ * This will re-attach the device drivers and re-init the devices.
++ *
++ * @ctx: The context structure from ssb_devices_freeze()
++ */
++int ssb_devices_thaw(struct ssb_freeze_context *ctx)
+ {
+-	struct ssb_device *dev;
+-	struct ssb_driver *drv;
+-	int err;
+-	int i;
++	struct ssb_bus *bus = ctx->bus;
++	struct ssb_device *sdev;
++	struct ssb_driver *sdrv;
++	unsigned int i;
++	int err, result = 0;
+ 
+ 	for (i = 0; i < bus->nr_devices; i++) {
+-		dev = &(bus->devices[i]);
+-		if (!dev->dev ||
+-		    !dev->dev->driver ||
+-		    !device_is_registered(dev->dev))
++		if (!ctx->device_frozen[i])
+ 			continue;
+-		drv = drv_to_ssb_drv(dev->dev->driver);
+-		if (!drv)
++		sdev = &bus->devices[i];
++
++		if (SSB_WARN_ON(!sdev->dev || !sdev->dev->driver))
+ 			continue;
+-		if (SSB_WARN_ON(!drv->resume))
++		sdrv = drv_to_ssb_drv(sdev->dev->driver);
++		if (SSB_WARN_ON(!sdrv || !sdrv->probe))
+ 			continue;
+-		err = drv->resume(dev);
++
++		err = sdrv->probe(sdev, &sdev->id);
+ 		if (err) {
+ 			ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
+-				   dev_name(dev->dev));
++				   dev_name(sdev->dev));
++			result = err;
+ 		}
++		ssb_driver_put(sdrv);
++		ssb_device_put(sdev);
+ 	}
+ 
+-	return 0;
++	return result;
+ }
+ #endif /* CONFIG_SSB_SPROM */
+ 
+@@ -472,6 +476,8 @@ static int ssb_devices_register(struct s
+ 		case SSB_BUSTYPE_SSB:
+ 			dev->dma_mask = &dev->coherent_dma_mask;
+ 			break;
++		default:
++			break;
+ 		}
+ 
+ 		sdev->dev = dev;
+@@ -1358,8 +1364,10 @@ static int __init ssb_modinit(void)
+ 	ssb_buses_lock();
+ 	err = ssb_attach_queued_buses();
+ 	ssb_buses_unlock();
+-	if (err)
++	if (err) {
+ 		bus_unregister(&ssb_bustype);
++		goto out;
++	}
+ 
+ 	err = b43_pci_ssb_bridge_init();
+ 	if (err) {
+@@ -1375,7 +1383,7 @@ static int __init ssb_modinit(void)
+ 		/* don't fail SSB init because of this */
+ 		err = 0;
+ 	}
+-
++out:
+ 	return err;
+ }
+ /* ssb must be initialized after PCI but before the ssb drivers.
+--- a/drivers/ssb/pci.c
++++ b/drivers/ssb/pci.c
+@@ -167,10 +167,16 @@ err_pci:
+ }
+ 
+ /* Get the word-offset for a SSB_SPROM_XXX define. */
+-#define SPOFF(offset)	(((offset) - SSB_SPROM_BASE) / sizeof(u16))
++#define SPOFF(offset)	((offset) / sizeof(u16))
+ /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
+-#define SPEX(_outvar, _offset, _mask, _shift)	\
++#define SPEX16(_outvar, _offset, _mask, _shift)	\
+ 	out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
++#define SPEX32(_outvar, _offset, _mask, _shift)	\
++	out->_outvar = ((((u32)in[SPOFF((_offset)+2)] << 16 | \
++			   in[SPOFF(_offset)]) & (_mask)) >> (_shift))
++#define SPEX(_outvar, _offset, _mask, _shift) \
++	SPEX16(_outvar, _offset, _mask, _shift)
++
+ 
+ static inline u8 ssb_crc8(u8 crc, u8 data)
+ {
+@@ -247,7 +253,7 @@ static int sprom_do_read(struct ssb_bus 
+ 	int i;
+ 
+ 	for (i = 0; i < bus->sprom_size; i++)
+-		sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2));
++		sprom[i] = ioread16(bus->mmio + bus->sprom_offset + (i * 2));
+ 
+ 	return 0;
+ }
+@@ -278,7 +284,7 @@ static int sprom_do_write(struct ssb_bus
+ 			ssb_printk("75%%");
+ 		else if (i % 2)
+ 			ssb_printk(".");
+-		writew(sprom[i], bus->mmio + SSB_SPROM_BASE + (i * 2));
++		writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
+ 		mmiowb();
+ 		msleep(20);
+ 	}
+@@ -474,12 +480,14 @@ static void sprom_extract_r8(struct ssb_
+ 
+ 	/* extract the MAC address */
+ 	for (i = 0; i < 3; i++) {
+-		v = in[SPOFF(SSB_SPROM1_IL0MAC) + i];
++		v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
+ 		*(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+ 	}
+ 	SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0);
+ 	SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
+ 	SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0);
++	SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0);
++	SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, 0xFFFF, 0);
+ 	SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A,
+ 	     SSB_SPROM8_ANTAVAIL_A_SHIFT);
+ 	SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG,
+@@ -490,12 +498,55 @@ static void sprom_extract_r8(struct ssb_
+ 	SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0);
+ 	SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A,
+ 	     SSB_SPROM8_ITSSI_A_SHIFT);
++	SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0);
++	SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK,
++	     SSB_SPROM8_MAXP_AL_SHIFT);
+ 	SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0);
+ 	SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1,
+ 	     SSB_SPROM8_GPIOA_P1_SHIFT);
+ 	SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0);
+ 	SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3,
+ 	     SSB_SPROM8_GPIOB_P3_SHIFT);
++	SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0);
++	SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G,
++	     SSB_SPROM8_TRI5G_SHIFT);
++	SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0);
++	SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH,
++	     SSB_SPROM8_TRI5GH_SHIFT);
++	SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, 0);
++	SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G,
++	     SSB_SPROM8_RXPO5G_SHIFT);
++	SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0);
++	SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G,
++	     SSB_SPROM8_RSSISMC2G_SHIFT);
++	SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G,
++	     SSB_SPROM8_RSSISAV2G_SHIFT);
++	SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G,
++	     SSB_SPROM8_BXA2G_SHIFT);
++	SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0);
++	SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G,
++	     SSB_SPROM8_RSSISMC5G_SHIFT);
++	SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G,
++	     SSB_SPROM8_RSSISAV5G_SHIFT);
++	SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G,
++	     SSB_SPROM8_BXA5G_SHIFT);
++	SPEX(pa0b0, SSB_SPROM8_PA0B0, 0xFFFF, 0);
++	SPEX(pa0b1, SSB_SPROM8_PA0B1, 0xFFFF, 0);
++	SPEX(pa0b2, SSB_SPROM8_PA0B2, 0xFFFF, 0);
++	SPEX(pa1b0, SSB_SPROM8_PA1B0, 0xFFFF, 0);
++	SPEX(pa1b1, SSB_SPROM8_PA1B1, 0xFFFF, 0);
++	SPEX(pa1b2, SSB_SPROM8_PA1B2, 0xFFFF, 0);
++	SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, 0xFFFF, 0);
++	SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, 0xFFFF, 0);
++	SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, 0xFFFF, 0);
++	SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, 0xFFFF, 0);
++	SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, 0xFFFF, 0);
++	SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, 0xFFFF, 0);
++	SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, 0xFFFF, 0);
++	SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, 0xFFFFFFFF, 0);
++	SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, 0xFFFFFFFF, 0);
++	SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, 0xFFFFFFFF, 0);
++	SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
+ 
+ 	/* Extract the antenna gain values. */
+ 	SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01,
+@@ -549,6 +600,7 @@ static int sprom_extract(struct ssb_bus 
+ 			ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
+ 				   "  revision %d detected. Will extract"
+ 				   " v1\n", out->revision);
++			out->revision = 1;
+ 			sprom_extract_r123(out, in);
+ 		}
+ 	}
+@@ -568,6 +620,14 @@ static int ssb_pci_sprom_get(struct ssb_
+ 	int err = -ENOMEM;
+ 	u16 *buf;
+ 
++	if (!ssb_is_sprom_available(bus)) {
++		ssb_printk(KERN_ERR PFX "No SPROM available!\n");
++		return -ENODEV;
++	}
++
++	bus->sprom_offset = (bus->chipco.dev->id.revision < 31) ?
++		SSB_SPROM_BASE1 : SSB_SPROM_BASE31;
++
+ 	buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
+ 	if (!buf)
+ 		goto out;
+--- a/drivers/ssb/pcmcia.c
++++ b/drivers/ssb/pcmcia.c
+@@ -583,7 +583,7 @@ static int ssb_pcmcia_sprom_write_all(st
+ 			ssb_printk(".");
+ 		err = ssb_pcmcia_sprom_write(bus, i, sprom[i]);
+ 		if (err) {
+-			ssb_printk("\n" KERN_NOTICE PFX
++			ssb_printk(KERN_NOTICE PFX
+ 				   "Failed to write to SPROM.\n");
+ 			failed = 1;
+ 			break;
+@@ -591,7 +591,7 @@ static int ssb_pcmcia_sprom_write_all(st
+ 	}
+ 	err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS);
+ 	if (err) {
+-		ssb_printk("\n" KERN_NOTICE PFX
++		ssb_printk(KERN_NOTICE PFX
+ 			   "Could not disable SPROM write access.\n");
+ 		failed = 1;
+ 	}
+@@ -617,134 +617,140 @@ static int ssb_pcmcia_sprom_check_crc(co
+ 	}						\
+   } while (0)
+ 
+-int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
+-			      struct ssb_init_invariants *iv)
++static int ssb_pcmcia_get_mac(struct pcmcia_device *p_dev,
++			tuple_t *tuple,
++			void *priv)
+ {
+-	tuple_t tuple;
+-	int res;
+-	unsigned char buf[32];
++	struct ssb_sprom *sprom = priv;
++
++	if (tuple->TupleData[0] != CISTPL_FUNCE_LAN_NODE_ID)
++		return -EINVAL;
++	if (tuple->TupleDataLen != ETH_ALEN + 2)
++		return -EINVAL;
++	if (tuple->TupleData[1] != ETH_ALEN)
++		return -EINVAL;
++	memcpy(sprom->il0mac, &tuple->TupleData[2], ETH_ALEN);
++	return 0;
++};
++
++static int ssb_pcmcia_do_get_invariants(struct pcmcia_device *p_dev,
++					tuple_t *tuple,
++					void *priv)
++{
++	struct ssb_init_invariants *iv = priv;
+ 	struct ssb_sprom *sprom = &iv->sprom;
+ 	struct ssb_boardinfo *bi = &iv->boardinfo;
+ 	const char *error_description;
+ 
++	GOTO_ERROR_ON(tuple->TupleDataLen < 1, "VEN tpl < 1");
++	switch (tuple->TupleData[0]) {
++	case SSB_PCMCIA_CIS_ID:
++		GOTO_ERROR_ON((tuple->TupleDataLen != 5) &&
++			      (tuple->TupleDataLen != 7),
++			      "id tpl size");
++		bi->vendor = tuple->TupleData[1] |
++			((u16)tuple->TupleData[2] << 8);
++		break;
++	case SSB_PCMCIA_CIS_BOARDREV:
++		GOTO_ERROR_ON(tuple->TupleDataLen != 2,
++			"boardrev tpl size");
++		sprom->board_rev = tuple->TupleData[1];
++		break;
++	case SSB_PCMCIA_CIS_PA:
++		GOTO_ERROR_ON((tuple->TupleDataLen != 9) &&
++			(tuple->TupleDataLen != 10),
++			"pa tpl size");
++		sprom->pa0b0 = tuple->TupleData[1] |
++			((u16)tuple->TupleData[2] << 8);
++		sprom->pa0b1 = tuple->TupleData[3] |
++			((u16)tuple->TupleData[4] << 8);
++		sprom->pa0b2 = tuple->TupleData[5] |
++			((u16)tuple->TupleData[6] << 8);
++		sprom->itssi_a = tuple->TupleData[7];
++		sprom->itssi_bg = tuple->TupleData[7];
++		sprom->maxpwr_a = tuple->TupleData[8];
++		sprom->maxpwr_bg = tuple->TupleData[8];
++		break;
++	case SSB_PCMCIA_CIS_OEMNAME:
++		/* We ignore this. */
++		break;
++	case SSB_PCMCIA_CIS_CCODE:
++		GOTO_ERROR_ON(tuple->TupleDataLen != 2,
++			"ccode tpl size");
++		sprom->country_code = tuple->TupleData[1];
++		break;
++	case SSB_PCMCIA_CIS_ANTENNA:
++		GOTO_ERROR_ON(tuple->TupleDataLen != 2,
++			"ant tpl size");
++		sprom->ant_available_a = tuple->TupleData[1];
++		sprom->ant_available_bg = tuple->TupleData[1];
++		break;
++	case SSB_PCMCIA_CIS_ANTGAIN:
++		GOTO_ERROR_ON(tuple->TupleDataLen != 2,
++			"antg tpl size");
++		sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1];
++		sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1];
++		sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1];
++		sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1];
++		sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1];
++		sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1];
++		sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1];
++		sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1];
++		break;
++	case SSB_PCMCIA_CIS_BFLAGS:
++		GOTO_ERROR_ON((tuple->TupleDataLen != 3) &&
++			(tuple->TupleDataLen != 5),
++			"bfl tpl size");
++		sprom->boardflags_lo = tuple->TupleData[1] |
++			((u16)tuple->TupleData[2] << 8);
++		break;
++	case SSB_PCMCIA_CIS_LEDS:
++		GOTO_ERROR_ON(tuple->TupleDataLen != 5,
++			"leds tpl size");
++		sprom->gpio0 = tuple->TupleData[1];
++		sprom->gpio1 = tuple->TupleData[2];
++		sprom->gpio2 = tuple->TupleData[3];
++		sprom->gpio3 = tuple->TupleData[4];
++		break;
++	}
++	return -ENOSPC; /* continue with next entry */
++
++error:
++	ssb_printk(KERN_ERR PFX
++		   "PCMCIA: Failed to fetch device invariants: %s\n",
++		   error_description);
++	return -ENODEV;
++}
++
++
++int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
++			      struct ssb_init_invariants *iv)
++{
++	struct ssb_sprom *sprom = &iv->sprom;
++	int res;
++
+ 	memset(sprom, 0xFF, sizeof(*sprom));
+ 	sprom->revision = 1;
+ 	sprom->boardflags_lo = 0;
+ 	sprom->boardflags_hi = 0;
+ 
+ 	/* First fetch the MAC address. */
+-	memset(&tuple, 0, sizeof(tuple));
+-	tuple.DesiredTuple = CISTPL_FUNCE;
+-	tuple.TupleData = buf;
+-	tuple.TupleDataMax = sizeof(buf);
+-	res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple);
+-	GOTO_ERROR_ON(res != 0, "MAC first tpl");
+-	res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
+-	GOTO_ERROR_ON(res != 0, "MAC first tpl data");
+-	while (1) {
+-		GOTO_ERROR_ON(tuple.TupleDataLen < 1, "MAC tpl < 1");
+-		if (tuple.TupleData[0] == CISTPL_FUNCE_LAN_NODE_ID)
+-			break;
+-		res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple);
+-		GOTO_ERROR_ON(res != 0, "MAC next tpl");
+-		res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
+-		GOTO_ERROR_ON(res != 0, "MAC next tpl data");
++	res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE,
++				ssb_pcmcia_get_mac, sprom);
++	if (res != 0) {
++		ssb_printk(KERN_ERR PFX
++			"PCMCIA: Failed to fetch MAC address\n");
++		return -ENODEV;
+ 	}
+-	GOTO_ERROR_ON(tuple.TupleDataLen != ETH_ALEN + 2, "MAC tpl size");
+-	memcpy(sprom->il0mac, &tuple.TupleData[2], ETH_ALEN);
+ 
+ 	/* Fetch the vendor specific tuples. */
+-	memset(&tuple, 0, sizeof(tuple));
+-	tuple.DesiredTuple = SSB_PCMCIA_CIS;
+-	tuple.TupleData = buf;
+-	tuple.TupleDataMax = sizeof(buf);
+-	res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple);
+-	GOTO_ERROR_ON(res != 0, "VEN first tpl");
+-	res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
+-	GOTO_ERROR_ON(res != 0, "VEN first tpl data");
+-	while (1) {
+-		GOTO_ERROR_ON(tuple.TupleDataLen < 1, "VEN tpl < 1");
+-		switch (tuple.TupleData[0]) {
+-		case SSB_PCMCIA_CIS_ID:
+-			GOTO_ERROR_ON((tuple.TupleDataLen != 5) &&
+-				      (tuple.TupleDataLen != 7),
+-				      "id tpl size");
+-			bi->vendor = tuple.TupleData[1] |
+-			       ((u16)tuple.TupleData[2] << 8);
+-			break;
+-		case SSB_PCMCIA_CIS_BOARDREV:
+-			GOTO_ERROR_ON(tuple.TupleDataLen != 2,
+-				      "boardrev tpl size");
+-			sprom->board_rev = tuple.TupleData[1];
+-			break;
+-		case SSB_PCMCIA_CIS_PA:
+-			GOTO_ERROR_ON(tuple.TupleDataLen != 9,
+-				      "pa tpl size");
+-			sprom->pa0b0 = tuple.TupleData[1] |
+-				 ((u16)tuple.TupleData[2] << 8);
+-			sprom->pa0b1 = tuple.TupleData[3] |
+-				 ((u16)tuple.TupleData[4] << 8);
+-			sprom->pa0b2 = tuple.TupleData[5] |
+-				 ((u16)tuple.TupleData[6] << 8);
+-			sprom->itssi_a = tuple.TupleData[7];
+-			sprom->itssi_bg = tuple.TupleData[7];
+-			sprom->maxpwr_a = tuple.TupleData[8];
+-			sprom->maxpwr_bg = tuple.TupleData[8];
+-			break;
+-		case SSB_PCMCIA_CIS_OEMNAME:
+-			/* We ignore this. */
+-			break;
+-		case SSB_PCMCIA_CIS_CCODE:
+-			GOTO_ERROR_ON(tuple.TupleDataLen != 2,
+-				      "ccode tpl size");
+-			sprom->country_code = tuple.TupleData[1];
+-			break;
+-		case SSB_PCMCIA_CIS_ANTENNA:
+-			GOTO_ERROR_ON(tuple.TupleDataLen != 2,
+-				      "ant tpl size");
+-			sprom->ant_available_a = tuple.TupleData[1];
+-			sprom->ant_available_bg = tuple.TupleData[1];
+-			break;
+-		case SSB_PCMCIA_CIS_ANTGAIN:
+-			GOTO_ERROR_ON(tuple.TupleDataLen != 2,
+-				      "antg tpl size");
+-			sprom->antenna_gain.ghz24.a0 = tuple.TupleData[1];
+-			sprom->antenna_gain.ghz24.a1 = tuple.TupleData[1];
+-			sprom->antenna_gain.ghz24.a2 = tuple.TupleData[1];
+-			sprom->antenna_gain.ghz24.a3 = tuple.TupleData[1];
+-			sprom->antenna_gain.ghz5.a0 = tuple.TupleData[1];
+-			sprom->antenna_gain.ghz5.a1 = tuple.TupleData[1];
+-			sprom->antenna_gain.ghz5.a2 = tuple.TupleData[1];
+-			sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1];
+-			break;
+-		case SSB_PCMCIA_CIS_BFLAGS:
+-			GOTO_ERROR_ON(tuple.TupleDataLen != 3,
+-				      "bfl tpl size");
+-			sprom->boardflags_lo = tuple.TupleData[1] |
+-					 ((u16)tuple.TupleData[2] << 8);
+-			break;
+-		case SSB_PCMCIA_CIS_LEDS:
+-			GOTO_ERROR_ON(tuple.TupleDataLen != 5,
+-				      "leds tpl size");
+-			sprom->gpio0 = tuple.TupleData[1];
+-			sprom->gpio1 = tuple.TupleData[2];
+-			sprom->gpio2 = tuple.TupleData[3];
+-			sprom->gpio3 = tuple.TupleData[4];
+-			break;
+-		}
+-		res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple);
+-		if (res == -ENOSPC)
+-			break;
+-		GOTO_ERROR_ON(res != 0, "VEN next tpl");
+-		res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
+-		GOTO_ERROR_ON(res != 0, "VEN next tpl data");
+-	}
++	res = pcmcia_loop_tuple(bus->host_pcmcia, SSB_PCMCIA_CIS,
++				ssb_pcmcia_do_get_invariants, sprom);
++	if ((res == 0) || (res == -ENOSPC))
++		return 0;
+ 
+-	return 0;
+-error:
+ 	ssb_printk(KERN_ERR PFX
+-		   "PCMCIA: Failed to fetch device invariants: %s\n",
+-		   error_description);
++			"PCMCIA: Failed to fetch device invariants\n");
+ 	return -ENODEV;
+ }
+ 
+--- a/include/linux/ssb/ssb.h
++++ b/include/linux/ssb/ssb.h
+@@ -27,24 +27,54 @@ struct ssb_sprom {
+ 	u8 et1mdcport;		/* MDIO for enet1 */
+ 	u8 board_rev;		/* Board revision number from SPROM. */
+ 	u8 country_code;	/* Country Code */
+-	u8 ant_available_a;	/* A-PHY antenna available bits (up to 4) */
+-	u8 ant_available_bg;	/* B/G-PHY antenna available bits (up to 4) */
++	u8 ant_available_a;	/* 2GHz antenna available bits (up to 4) */
++	u8 ant_available_bg;	/* 5GHz antenna available bits (up to 4) */
+ 	u16 pa0b0;
+ 	u16 pa0b1;
+ 	u16 pa0b2;
+ 	u16 pa1b0;
+ 	u16 pa1b1;
+ 	u16 pa1b2;
++	u16 pa1lob0;
++	u16 pa1lob1;
++	u16 pa1lob2;
++	u16 pa1hib0;
++	u16 pa1hib1;
++	u16 pa1hib2;
+ 	u8 gpio0;		/* GPIO pin 0 */
+ 	u8 gpio1;		/* GPIO pin 1 */
+ 	u8 gpio2;		/* GPIO pin 2 */
+ 	u8 gpio3;		/* GPIO pin 3 */
+-	u16 maxpwr_a;		/* A-PHY Amplifier Max Power (in dBm Q5.2) */
+-	u16 maxpwr_bg;		/* B/G-PHY Amplifier Max Power (in dBm Q5.2) */
++	u16 maxpwr_bg;		/* 2.4GHz Amplifier Max Power (in dBm Q5.2) */
++	u16 maxpwr_al;		/* 5.2GHz Amplifier Max Power (in dBm Q5.2) */
++	u16 maxpwr_a;		/* 5.3GHz Amplifier Max Power (in dBm Q5.2) */
++	u16 maxpwr_ah;		/* 5.8GHz Amplifier Max Power (in dBm Q5.2) */
+ 	u8 itssi_a;		/* Idle TSSI Target for A-PHY */
+ 	u8 itssi_bg;		/* Idle TSSI Target for B/G-PHY */
+-	u16 boardflags_lo;	/* Boardflags (low 16 bits) */
+-	u16 boardflags_hi;	/* Boardflags (high 16 bits) */
++	u8 tri2g;		/* 2.4GHz TX isolation */
++	u8 tri5gl;		/* 5.2GHz TX isolation */
++	u8 tri5g;		/* 5.3GHz TX isolation */
++	u8 tri5gh;		/* 5.8GHz TX isolation */
++	u8 rxpo2g;		/* 2GHz RX power offset */
++	u8 rxpo5g;		/* 5GHz RX power offset */
++	u8 rssisav2g;		/* 2GHz RSSI params */
++	u8 rssismc2g;
++	u8 rssismf2g;
++	u8 bxa2g;		/* 2GHz BX arch */
++	u8 rssisav5g;		/* 5GHz RSSI params */
++	u8 rssismc5g;
++	u8 rssismf5g;
++	u8 bxa5g;		/* 5GHz BX arch */
++	u16 cck2gpo;		/* CCK power offset */
++	u32 ofdm2gpo;		/* 2.4GHz OFDM power offset */
++	u32 ofdm5glpo;		/* 5.2GHz OFDM power offset */
++	u32 ofdm5gpo;		/* 5.3GHz OFDM power offset */
++	u32 ofdm5ghpo;		/* 5.8GHz OFDM power offset */
++	u16 boardflags_lo;	/* Board flags (bits 0-15) */
++	u16 boardflags_hi;	/* Board flags (bits 16-31) */
++	u16 boardflags2_lo;	/* Board flags (bits 32-47) */
++	u16 boardflags2_hi;	/* Board flags (bits 48-63) */
++	/* TODO store board flags in a single u64 */
+ 
+ 	/* Antenna gain values for up to 4 antennas
+ 	 * on each band. Values in dBm/4 (Q5.2). Negative gain means the
+@@ -58,7 +88,7 @@ struct ssb_sprom {
+ 		} ghz5;		/* 5GHz band */
+ 	} antenna_gain;
+ 
+-	/* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */
++	/* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
+ };
+ 
+ /* Information about the PCB the circuitry is soldered on. */
+@@ -208,6 +238,7 @@ enum ssb_bustype {
+ 	SSB_BUSTYPE_SSB,	/* This SSB bus is the system bus */
+ 	SSB_BUSTYPE_PCI,	/* SSB is connected to PCI bus */
+ 	SSB_BUSTYPE_PCMCIA,	/* SSB is connected to PCMCIA bus */
++	SSB_BUSTYPE_SDIO,	/* SSB is connected to SDIO bus */
+ };
+ 
+ /* board_vendor */
+@@ -238,20 +269,33 @@ struct ssb_bus {
+ 
+ 	const struct ssb_bus_ops *ops;
+ 
+-	/* The core in the basic address register window. (PCI bus only) */
++	/* The core currently mapped into the MMIO window.
++	 * Not valid on all host-buses. So don't use outside of SSB. */
+ 	struct ssb_device *mapped_device;
+-	/* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
+-	u8 mapped_pcmcia_seg;
++	union {
++		/* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
++		u8 mapped_pcmcia_seg;
++		/* Current SSB base address window for SDIO. */
++		u32 sdio_sbaddr;
++	};
+ 	/* Lock for core and segment switching.
+ 	 * On PCMCIA-host busses this is used to protect the whole MMIO access. */
+ 	spinlock_t bar_lock;
+ 
+-	/* The bus this backplane is running on. */
++	/* The host-bus this backplane is running on. */
+ 	enum ssb_bustype bustype;
+-	/* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */
+-	struct pci_dev *host_pci;
+-	/* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
+-	struct pcmcia_device *host_pcmcia;
++	/* Pointers to the host-bus. Check bustype before using any of these pointers. */
++	union {
++		/* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */
++		struct pci_dev *host_pci;
++		/* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
++		struct pcmcia_device *host_pcmcia;
++		/* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */
++		struct sdio_func *host_sdio;
++	};
++
++	/* See enum ssb_quirks */
++	unsigned int quirks;
+ 
+ #ifdef CONFIG_SSB_SPROM
+ 	/* Mutex to protect the SPROM writing. */
+@@ -261,6 +305,7 @@ struct ssb_bus {
+ 	/* ID information about the Chip. */
+ 	u16 chip_id;
+ 	u16 chip_rev;
++	u16 sprom_offset;
+ 	u16 sprom_size;		/* number of words in sprom */
+ 	u8 chip_package;
+ 
+@@ -306,6 +351,11 @@ struct ssb_bus {
+ #endif /* DEBUG */
+ };
+ 
++enum ssb_quirks {
++	/* SDIO connected card requires performing a read after writing a 32-bit value */
++	SSB_QUIRK_SDIO_READ_AFTER_WRITE32	= (1 << 0),
++};
++
+ /* The initialization-invariants. */
+ struct ssb_init_invariants {
+ 	/* Versioning information about the PCB. */
+@@ -336,9 +386,18 @@ extern int ssb_bus_pcmciabus_register(st
+ 				      struct pcmcia_device *pcmcia_dev,
+ 				      unsigned long baseaddr);
+ #endif /* CONFIG_SSB_PCMCIAHOST */
++#ifdef CONFIG_SSB_SDIOHOST
++extern int ssb_bus_sdiobus_register(struct ssb_bus *bus,
++				    struct sdio_func *sdio_func,
++				    unsigned int quirks);
++#endif /* CONFIG_SSB_SDIOHOST */
++
+ 
+ extern void ssb_bus_unregister(struct ssb_bus *bus);
+ 
++/* Does the device have an SPROM? */
++extern bool ssb_is_sprom_available(struct ssb_bus *bus);
++
+ /* Set a fallback SPROM.
+  * See kdoc at the function definition for complete documentation. */
+ extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
+--- a/include/linux/ssb/ssb_driver_chipcommon.h
++++ b/include/linux/ssb/ssb_driver_chipcommon.h
+@@ -53,6 +53,7 @@
+ #define  SSB_CHIPCO_CAP_64BIT		0x08000000	/* 64-bit Backplane */
+ #define  SSB_CHIPCO_CAP_PMU		0x10000000	/* PMU available (rev >= 20) */
+ #define  SSB_CHIPCO_CAP_ECI		0x20000000	/* ECI available (rev >= 20) */
++#define  SSB_CHIPCO_CAP_SPROM		0x40000000	/* SPROM present */
+ #define SSB_CHIPCO_CORECTL		0x0008
+ #define  SSB_CHIPCO_CORECTL_UARTCLK0	0x00000001	/* Drive UART with internal clock */
+ #define	 SSB_CHIPCO_CORECTL_SE		0x00000002	/* sync clk out enable (corerev >= 3) */
+@@ -385,6 +386,7 @@
+ 
+ 
+ /** Chip specific Chip-Status register contents. */
++#define SSB_CHIPCO_CHST_4322_SPROM_EXISTS	0x00000040 /* SPROM present */
+ #define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL	0x00000003
+ #define SSB_CHIPCO_CHST_4325_DEFCIS_SEL		0 /* OTP is powered up, use def. CIS, no SPROM */
+ #define SSB_CHIPCO_CHST_4325_SPROM_SEL		1 /* OTP is powered up, SPROM is present */
+@@ -398,6 +400,18 @@
+ #define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT	4
+ #define SSB_CHIPCO_CHST_4325_PMUTOP_2B 		0x00000200 /* 1 for 2b, 0 for to 2a */
+ 
++/** Macros to determine SPROM presence based on Chip-Status register. */
++#define SSB_CHIPCO_CHST_4312_SPROM_PRESENT(status) \
++	((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
++		SSB_CHIPCO_CHST_4325_OTP_SEL)
++#define SSB_CHIPCO_CHST_4322_SPROM_PRESENT(status) \
++	(status & SSB_CHIPCO_CHST_4322_SPROM_EXISTS)
++#define SSB_CHIPCO_CHST_4325_SPROM_PRESENT(status) \
++	(((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
++		SSB_CHIPCO_CHST_4325_DEFCIS_SEL) && \
++	 ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
++		SSB_CHIPCO_CHST_4325_OTP_SEL))
++
+ 
+ 
+ /** Clockcontrol masks and values **/
+@@ -564,6 +578,7 @@ struct ssb_chipcommon_pmu {
+ struct ssb_chipcommon {
+ 	struct ssb_device *dev;
+ 	u32 capabilities;
++	u32 status;
+ 	/* Fast Powerup Delay constant */
+ 	u16 fast_pwrup_delay;
+ 	struct ssb_chipcommon_pmu pmu;
+@@ -629,5 +644,15 @@ extern int ssb_chipco_serial_init(struct
+ /* PMU support */
+ extern void ssb_pmu_init(struct ssb_chipcommon *cc);
+ 
++enum ssb_pmu_ldo_volt_id {
++	LDO_PAREF = 0,
++	LDO_VOLT1,
++	LDO_VOLT2,
++	LDO_VOLT3,
++};
++
++void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
++			     enum ssb_pmu_ldo_volt_id id, u32 voltage);
++void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on);
+ 
+ #endif /* LINUX_SSB_CHIPCO_H_ */
+--- a/include/linux/ssb/ssb_regs.h
++++ b/include/linux/ssb/ssb_regs.h
+@@ -162,7 +162,7 @@
+ 
+ /* SPROM shadow area. If not otherwise noted, fields are
+  * two bytes wide. Note that the SPROM can _only_ be read
+- * in two-byte quantinies.
++ * in two-byte quantities.
+  */
+ #define SSB_SPROMSIZE_WORDS		64
+ #define SSB_SPROMSIZE_BYTES		(SSB_SPROMSIZE_WORDS * sizeof(u16))
+@@ -170,26 +170,27 @@
+ #define SSB_SPROMSIZE_WORDS_R4		220
+ #define SSB_SPROMSIZE_BYTES_R123	(SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
+ #define SSB_SPROMSIZE_BYTES_R4		(SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
+-#define SSB_SPROM_BASE			0x1000
+-#define SSB_SPROM_REVISION		0x107E
++#define SSB_SPROM_BASE1			0x1000
++#define SSB_SPROM_BASE31		0x0800
++#define SSB_SPROM_REVISION		0x007E
+ #define  SSB_SPROM_REVISION_REV		0x00FF	/* SPROM Revision number */
+ #define  SSB_SPROM_REVISION_CRC		0xFF00	/* SPROM CRC8 value */
+ #define  SSB_SPROM_REVISION_CRC_SHIFT	8
+ 
+ /* SPROM Revision 1 */
+-#define SSB_SPROM1_SPID			0x1004	/* Subsystem Product ID for PCI */
+-#define SSB_SPROM1_SVID			0x1006	/* Subsystem Vendor ID for PCI */
+-#define SSB_SPROM1_PID			0x1008	/* Product ID for PCI */
+-#define SSB_SPROM1_IL0MAC		0x1048	/* 6 bytes MAC address for 802.11b/g */
+-#define SSB_SPROM1_ET0MAC		0x104E	/* 6 bytes MAC address for Ethernet */
+-#define SSB_SPROM1_ET1MAC		0x1054	/* 6 bytes MAC address for 802.11a */
+-#define SSB_SPROM1_ETHPHY		0x105A	/* Ethernet PHY settings */
++#define SSB_SPROM1_SPID			0x0004	/* Subsystem Product ID for PCI */
++#define SSB_SPROM1_SVID			0x0006	/* Subsystem Vendor ID for PCI */
++#define SSB_SPROM1_PID			0x0008	/* Product ID for PCI */
++#define SSB_SPROM1_IL0MAC		0x0048	/* 6 bytes MAC address for 802.11b/g */
++#define SSB_SPROM1_ET0MAC		0x004E	/* 6 bytes MAC address for Ethernet */
++#define SSB_SPROM1_ET1MAC		0x0054	/* 6 bytes MAC address for 802.11a */
++#define SSB_SPROM1_ETHPHY		0x005A	/* Ethernet PHY settings */
+ #define  SSB_SPROM1_ETHPHY_ET0A		0x001F	/* MII Address for enet0 */
+ #define  SSB_SPROM1_ETHPHY_ET1A		0x03E0	/* MII Address for enet1 */
+ #define  SSB_SPROM1_ETHPHY_ET1A_SHIFT	5
+ #define  SSB_SPROM1_ETHPHY_ET0M		(1<<14)	/* MDIO for enet0 */
+ #define  SSB_SPROM1_ETHPHY_ET1M		(1<<15)	/* MDIO for enet1 */
+-#define SSB_SPROM1_BINF			0x105C	/* Board info */
++#define SSB_SPROM1_BINF			0x005C	/* Board info */
+ #define  SSB_SPROM1_BINF_BREV		0x00FF	/* Board Revision */
+ #define  SSB_SPROM1_BINF_CCODE		0x0F00	/* Country Code */
+ #define  SSB_SPROM1_BINF_CCODE_SHIFT	8
+@@ -197,63 +198,63 @@
+ #define  SSB_SPROM1_BINF_ANTBG_SHIFT	12
+ #define  SSB_SPROM1_BINF_ANTA		0xC000	/* Available A-PHY antennas */
+ #define  SSB_SPROM1_BINF_ANTA_SHIFT	14
+-#define SSB_SPROM1_PA0B0		0x105E
+-#define SSB_SPROM1_PA0B1		0x1060
+-#define SSB_SPROM1_PA0B2		0x1062
+-#define SSB_SPROM1_GPIOA		0x1064	/* General Purpose IO pins 0 and 1 */
++#define SSB_SPROM1_PA0B0		0x005E
++#define SSB_SPROM1_PA0B1		0x0060
++#define SSB_SPROM1_PA0B2		0x0062
++#define SSB_SPROM1_GPIOA		0x0064	/* General Purpose IO pins 0 and 1 */
+ #define  SSB_SPROM1_GPIOA_P0		0x00FF	/* Pin 0 */
+ #define  SSB_SPROM1_GPIOA_P1		0xFF00	/* Pin 1 */
+ #define  SSB_SPROM1_GPIOA_P1_SHIFT	8
+-#define SSB_SPROM1_GPIOB		0x1066	/* General Purpuse IO pins 2 and 3 */
++#define SSB_SPROM1_GPIOB		0x0066	/* General Purpuse IO pins 2 and 3 */
+ #define  SSB_SPROM1_GPIOB_P2		0x00FF	/* Pin 2 */
+ #define  SSB_SPROM1_GPIOB_P3		0xFF00	/* Pin 3 */
+ #define  SSB_SPROM1_GPIOB_P3_SHIFT	8
+-#define SSB_SPROM1_MAXPWR		0x1068	/* Power Amplifier Max Power */
++#define SSB_SPROM1_MAXPWR		0x0068	/* Power Amplifier Max Power */
+ #define  SSB_SPROM1_MAXPWR_BG		0x00FF	/* B-PHY and G-PHY (in dBm Q5.2) */
+ #define  SSB_SPROM1_MAXPWR_A		0xFF00	/* A-PHY (in dBm Q5.2) */
+ #define  SSB_SPROM1_MAXPWR_A_SHIFT	8
+-#define SSB_SPROM1_PA1B0		0x106A
+-#define SSB_SPROM1_PA1B1		0x106C
+-#define SSB_SPROM1_PA1B2		0x106E
+-#define SSB_SPROM1_ITSSI		0x1070	/* Idle TSSI Target */
++#define SSB_SPROM1_PA1B0		0x006A
++#define SSB_SPROM1_PA1B1		0x006C
++#define SSB_SPROM1_PA1B2		0x006E
++#define SSB_SPROM1_ITSSI		0x0070	/* Idle TSSI Target */
+ #define  SSB_SPROM1_ITSSI_BG		0x00FF	/* B-PHY and G-PHY*/
+ #define  SSB_SPROM1_ITSSI_A		0xFF00	/* A-PHY */
+ #define  SSB_SPROM1_ITSSI_A_SHIFT	8
+-#define SSB_SPROM1_BFLLO		0x1072	/* Boardflags (low 16 bits) */
+-#define SSB_SPROM1_AGAIN		0x1074	/* Antenna Gain (in dBm Q5.2) */
++#define SSB_SPROM1_BFLLO		0x0072	/* Boardflags (low 16 bits) */
++#define SSB_SPROM1_AGAIN		0x0074	/* Antenna Gain (in dBm Q5.2) */
+ #define  SSB_SPROM1_AGAIN_BG		0x00FF	/* B-PHY and G-PHY */
+ #define  SSB_SPROM1_AGAIN_BG_SHIFT	0
+ #define  SSB_SPROM1_AGAIN_A		0xFF00	/* A-PHY */
+ #define  SSB_SPROM1_AGAIN_A_SHIFT	8
+ 
+ /* SPROM Revision 2 (inherits from rev 1) */
+-#define SSB_SPROM2_BFLHI		0x1038	/* Boardflags (high 16 bits) */
+-#define SSB_SPROM2_MAXP_A		0x103A	/* A-PHY Max Power */
++#define SSB_SPROM2_BFLHI		0x0038	/* Boardflags (high 16 bits) */
++#define SSB_SPROM2_MAXP_A		0x003A	/* A-PHY Max Power */
+ #define  SSB_SPROM2_MAXP_A_HI		0x00FF	/* Max Power High */
+ #define  SSB_SPROM2_MAXP_A_LO		0xFF00	/* Max Power Low */
+ #define  SSB_SPROM2_MAXP_A_LO_SHIFT	8
+-#define SSB_SPROM2_PA1LOB0		0x103C	/* A-PHY PowerAmplifier Low Settings */
+-#define SSB_SPROM2_PA1LOB1		0x103E	/* A-PHY PowerAmplifier Low Settings */
+-#define SSB_SPROM2_PA1LOB2		0x1040	/* A-PHY PowerAmplifier Low Settings */
+-#define SSB_SPROM2_PA1HIB0		0x1042	/* A-PHY PowerAmplifier High Settings */
+-#define SSB_SPROM2_PA1HIB1		0x1044	/* A-PHY PowerAmplifier High Settings */
+-#define SSB_SPROM2_PA1HIB2		0x1046	/* A-PHY PowerAmplifier High Settings */
+-#define SSB_SPROM2_OPO			0x1078	/* OFDM Power Offset from CCK Level */
++#define SSB_SPROM2_PA1LOB0		0x003C	/* A-PHY PowerAmplifier Low Settings */
++#define SSB_SPROM2_PA1LOB1		0x003E	/* A-PHY PowerAmplifier Low Settings */
++#define SSB_SPROM2_PA1LOB2		0x0040	/* A-PHY PowerAmplifier Low Settings */
++#define SSB_SPROM2_PA1HIB0		0x0042	/* A-PHY PowerAmplifier High Settings */
++#define SSB_SPROM2_PA1HIB1		0x0044	/* A-PHY PowerAmplifier High Settings */
++#define SSB_SPROM2_PA1HIB2		0x0046	/* A-PHY PowerAmplifier High Settings */
++#define SSB_SPROM2_OPO			0x0078	/* OFDM Power Offset from CCK Level */
+ #define  SSB_SPROM2_OPO_VALUE		0x00FF
+ #define  SSB_SPROM2_OPO_UNUSED		0xFF00
+-#define SSB_SPROM2_CCODE		0x107C	/* Two char Country Code */
++#define SSB_SPROM2_CCODE		0x007C	/* Two char Country Code */
+ 
+ /* SPROM Revision 3 (inherits most data from rev 2) */
+-#define SSB_SPROM3_IL0MAC		0x104A	/* 6 bytes MAC address for 802.11b/g */
+-#define SSB_SPROM3_OFDMAPO		0x102C	/* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
+-#define SSB_SPROM3_OFDMALPO		0x1030	/* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
+-#define SSB_SPROM3_OFDMAHPO		0x1034	/* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
+-#define SSB_SPROM3_GPIOLDC		0x1042	/* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
++#define SSB_SPROM3_OFDMAPO		0x002C	/* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
++#define SSB_SPROM3_OFDMALPO		0x0030	/* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
++#define SSB_SPROM3_OFDMAHPO		0x0034	/* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
++#define SSB_SPROM3_GPIOLDC		0x0042	/* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
+ #define  SSB_SPROM3_GPIOLDC_OFF		0x0000FF00	/* Off Count */
+ #define  SSB_SPROM3_GPIOLDC_OFF_SHIFT	8
+ #define  SSB_SPROM3_GPIOLDC_ON		0x00FF0000	/* On Count */
+ #define  SSB_SPROM3_GPIOLDC_ON_SHIFT	16
+-#define SSB_SPROM3_CCKPO		0x1078	/* CCK Power Offset */
++#define SSB_SPROM3_IL0MAC		0x004A	/* 6 bytes MAC address for 802.11b/g */
++#define SSB_SPROM3_CCKPO		0x0078	/* CCK Power Offset */
+ #define  SSB_SPROM3_CCKPO_1M		0x000F	/* 1M Rate PO */
+ #define  SSB_SPROM3_CCKPO_2M		0x00F0	/* 2M Rate PO */
+ #define  SSB_SPROM3_CCKPO_2M_SHIFT	4
+@@ -264,104 +265,156 @@
+ #define  SSB_SPROM3_OFDMGPO		0x107A	/* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
+ 
+ /* SPROM Revision 4 */
+-#define SSB_SPROM4_IL0MAC		0x104C	/* 6 byte MAC address for a/b/g/n */
+-#define SSB_SPROM4_ETHPHY		0x105A	/* Ethernet PHY settings ?? */
++#define SSB_SPROM4_BFLLO		0x0044	/* Boardflags (low 16 bits) */
++#define SSB_SPROM4_BFLHI		0x0046  /* Board Flags Hi */
++#define SSB_SPROM4_IL0MAC		0x004C	/* 6 byte MAC address for a/b/g/n */
++#define SSB_SPROM4_CCODE		0x0052	/* Country Code (2 bytes) */
++#define SSB_SPROM4_GPIOA		0x0056	/* Gen. Purpose IO # 0 and 1 */
++#define  SSB_SPROM4_GPIOA_P0		0x00FF	/* Pin 0 */
++#define  SSB_SPROM4_GPIOA_P1		0xFF00	/* Pin 1 */
++#define  SSB_SPROM4_GPIOA_P1_SHIFT	8
++#define SSB_SPROM4_GPIOB		0x0058	/* Gen. Purpose IO # 2 and 3 */
++#define  SSB_SPROM4_GPIOB_P2		0x00FF	/* Pin 2 */
++#define  SSB_SPROM4_GPIOB_P3		0xFF00	/* Pin 3 */
++#define  SSB_SPROM4_GPIOB_P3_SHIFT	8
++#define SSB_SPROM4_ETHPHY		0x005A	/* Ethernet PHY settings ?? */
+ #define  SSB_SPROM4_ETHPHY_ET0A		0x001F	/* MII Address for enet0 */
+ #define  SSB_SPROM4_ETHPHY_ET1A		0x03E0	/* MII Address for enet1 */
+ #define  SSB_SPROM4_ETHPHY_ET1A_SHIFT	5
+ #define  SSB_SPROM4_ETHPHY_ET0M		(1<<14)	/* MDIO for enet0 */
+ #define  SSB_SPROM4_ETHPHY_ET1M		(1<<15)	/* MDIO for enet1 */
+-#define SSB_SPROM4_CCODE		0x1052	/* Country Code (2 bytes) */
+-#define SSB_SPROM4_ANTAVAIL		0x105D  /* Antenna available bitfields */
+-#define SSB_SPROM4_ANTAVAIL_A		0x00FF	/* A-PHY bitfield */
+-#define SSB_SPROM4_ANTAVAIL_A_SHIFT	0
+-#define SSB_SPROM4_ANTAVAIL_BG		0xFF00	/* B-PHY and G-PHY bitfield */
+-#define SSB_SPROM4_ANTAVAIL_BG_SHIFT	8
+-#define SSB_SPROM4_BFLLO		0x1044	/* Boardflags (low 16 bits) */
+-#define SSB_SPROM4_AGAIN01		0x105E	/* Antenna Gain (in dBm Q5.2) */
++#define SSB_SPROM4_ANTAVAIL		0x005D  /* Antenna available bitfields */
++#define  SSB_SPROM4_ANTAVAIL_A		0x00FF	/* A-PHY bitfield */
++#define  SSB_SPROM4_ANTAVAIL_A_SHIFT	0
++#define  SSB_SPROM4_ANTAVAIL_BG		0xFF00	/* B-PHY and G-PHY bitfield */
++#define  SSB_SPROM4_ANTAVAIL_BG_SHIFT	8
++#define SSB_SPROM4_AGAIN01		0x005E	/* Antenna Gain (in dBm Q5.2) */
+ #define  SSB_SPROM4_AGAIN0		0x00FF	/* Antenna 0 */
+ #define  SSB_SPROM4_AGAIN0_SHIFT	0
+ #define  SSB_SPROM4_AGAIN1		0xFF00	/* Antenna 1 */
+ #define  SSB_SPROM4_AGAIN1_SHIFT	8
+-#define SSB_SPROM4_AGAIN23		0x1060
++#define SSB_SPROM4_AGAIN23		0x0060
+ #define  SSB_SPROM4_AGAIN2		0x00FF	/* Antenna 2 */
+ #define  SSB_SPROM4_AGAIN2_SHIFT	0
+ #define  SSB_SPROM4_AGAIN3		0xFF00	/* Antenna 3 */
+ #define  SSB_SPROM4_AGAIN3_SHIFT	8
+-#define SSB_SPROM4_BFLHI		0x1046  /* Board Flags Hi */
+-#define SSB_SPROM4_MAXP_BG		0x1080  /* Max Power BG in path 1 */
++#define SSB_SPROM4_MAXP_BG		0x0080  /* Max Power BG in path 1 */
+ #define  SSB_SPROM4_MAXP_BG_MASK	0x00FF  /* Mask for Max Power BG */
+ #define  SSB_SPROM4_ITSSI_BG		0xFF00	/* Mask for path 1 itssi_bg */
+ #define  SSB_SPROM4_ITSSI_BG_SHIFT	8
+-#define SSB_SPROM4_MAXP_A		0x108A  /* Max Power A in path 1 */
++#define SSB_SPROM4_MAXP_A		0x008A  /* Max Power A in path 1 */
+ #define  SSB_SPROM4_MAXP_A_MASK		0x00FF  /* Mask for Max Power A */
+ #define  SSB_SPROM4_ITSSI_A		0xFF00	/* Mask for path 1 itssi_a */
+ #define  SSB_SPROM4_ITSSI_A_SHIFT	8
+-#define SSB_SPROM4_GPIOA		0x1056	/* Gen. Purpose IO # 0 and 1 */
+-#define  SSB_SPROM4_GPIOA_P0		0x00FF	/* Pin 0 */
+-#define  SSB_SPROM4_GPIOA_P1		0xFF00	/* Pin 1 */
+-#define  SSB_SPROM4_GPIOA_P1_SHIFT	8
+-#define SSB_SPROM4_GPIOB		0x1058	/* Gen. Purpose IO # 2 and 3 */
+-#define  SSB_SPROM4_GPIOB_P2		0x00FF	/* Pin 2 */
+-#define  SSB_SPROM4_GPIOB_P3		0xFF00	/* Pin 3 */
+-#define  SSB_SPROM4_GPIOB_P3_SHIFT	8
+-#define SSB_SPROM4_PA0B0		0x1082	/* The paXbY locations are */
+-#define SSB_SPROM4_PA0B1		0x1084	/*   only guesses */
+-#define SSB_SPROM4_PA0B2		0x1086
+-#define SSB_SPROM4_PA1B0		0x108E
+-#define SSB_SPROM4_PA1B1		0x1090
+-#define SSB_SPROM4_PA1B2		0x1092
++#define SSB_SPROM4_PA0B0		0x0082	/* The paXbY locations are */
++#define SSB_SPROM4_PA0B1		0x0084	/*   only guesses */
++#define SSB_SPROM4_PA0B2		0x0086
++#define SSB_SPROM4_PA1B0		0x008E
++#define SSB_SPROM4_PA1B1		0x0090
++#define SSB_SPROM4_PA1B2		0x0092
+ 
+ /* SPROM Revision 5 (inherits most data from rev 4) */
+-#define SSB_SPROM5_BFLLO		0x104A	/* Boardflags (low 16 bits) */
+-#define SSB_SPROM5_BFLHI		0x104C  /* Board Flags Hi */
+-#define SSB_SPROM5_IL0MAC		0x1052	/* 6 byte MAC address for a/b/g/n */
+-#define SSB_SPROM5_CCODE		0x1044	/* Country Code (2 bytes) */
+-#define SSB_SPROM5_GPIOA		0x1076	/* Gen. Purpose IO # 0 and 1 */
++#define SSB_SPROM5_CCODE		0x0044	/* Country Code (2 bytes) */
++#define SSB_SPROM5_BFLLO		0x004A	/* Boardflags (low 16 bits) */
++#define SSB_SPROM5_BFLHI		0x004C  /* Board Flags Hi */
++#define SSB_SPROM5_IL0MAC		0x0052	/* 6 byte MAC address for a/b/g/n */
++#define SSB_SPROM5_GPIOA		0x0076	/* Gen. Purpose IO # 0 and 1 */
+ #define  SSB_SPROM5_GPIOA_P0		0x00FF	/* Pin 0 */
+ #define  SSB_SPROM5_GPIOA_P1		0xFF00	/* Pin 1 */
+ #define  SSB_SPROM5_GPIOA_P1_SHIFT	8
+-#define SSB_SPROM5_GPIOB		0x1078	/* Gen. Purpose IO # 2 and 3 */
++#define SSB_SPROM5_GPIOB		0x0078	/* Gen. Purpose IO # 2 and 3 */
+ #define  SSB_SPROM5_GPIOB_P2		0x00FF	/* Pin 2 */
+ #define  SSB_SPROM5_GPIOB_P3		0xFF00	/* Pin 3 */
+ #define  SSB_SPROM5_GPIOB_P3_SHIFT	8
+ 
+ /* SPROM Revision 8 */
+-#define SSB_SPROM8_BFLLO		0x1084	/* Boardflags (low 16 bits) */
+-#define SSB_SPROM8_BFLHI		0x1086	/* Boardflags Hi */
+-#define SSB_SPROM8_IL0MAC		0x108C	/* 6 byte MAC address */
+-#define SSB_SPROM8_CCODE		0x1092	/* 2 byte country code */
+-#define SSB_SPROM8_ANTAVAIL		0x109C  /* Antenna available bitfields*/
+-#define SSB_SPROM8_ANTAVAIL_A		0xFF00	/* A-PHY bitfield */
+-#define SSB_SPROM8_ANTAVAIL_A_SHIFT	8
+-#define SSB_SPROM8_ANTAVAIL_BG		0x00FF	/* B-PHY and G-PHY bitfield */
+-#define SSB_SPROM8_ANTAVAIL_BG_SHIFT	0
+-#define SSB_SPROM8_AGAIN01		0x109E	/* Antenna Gain (in dBm Q5.2) */
++#define SSB_SPROM8_BOARDREV		0x0082	/* Board revision */
++#define SSB_SPROM8_BFLLO		0x0084	/* Board flags (bits 0-15) */
++#define SSB_SPROM8_BFLHI		0x0086	/* Board flags (bits 16-31) */
++#define SSB_SPROM8_BFL2LO		0x0088	/* Board flags (bits 32-47) */
++#define SSB_SPROM8_BFL2HI		0x008A	/* Board flags (bits 48-63) */
++#define SSB_SPROM8_IL0MAC		0x008C	/* 6 byte MAC address */
++#define SSB_SPROM8_CCODE		0x0092	/* 2 byte country code */
++#define SSB_SPROM8_GPIOA		0x0096	/*Gen. Purpose IO # 0 and 1 */
++#define  SSB_SPROM8_GPIOA_P0		0x00FF	/* Pin 0 */
++#define  SSB_SPROM8_GPIOA_P1		0xFF00	/* Pin 1 */
++#define  SSB_SPROM8_GPIOA_P1_SHIFT	8
++#define SSB_SPROM8_GPIOB		0x0098	/* Gen. Purpose IO # 2 and 3 */
++#define  SSB_SPROM8_GPIOB_P2		0x00FF	/* Pin 2 */
++#define  SSB_SPROM8_GPIOB_P3		0xFF00	/* Pin 3 */
++#define  SSB_SPROM8_GPIOB_P3_SHIFT	8
++#define SSB_SPROM8_ANTAVAIL		0x009C  /* Antenna available bitfields*/
++#define  SSB_SPROM8_ANTAVAIL_A		0xFF00	/* A-PHY bitfield */
++#define  SSB_SPROM8_ANTAVAIL_A_SHIFT	8
++#define  SSB_SPROM8_ANTAVAIL_BG		0x00FF	/* B-PHY and G-PHY bitfield */
++#define  SSB_SPROM8_ANTAVAIL_BG_SHIFT	0
++#define SSB_SPROM8_AGAIN01		0x009E	/* Antenna Gain (in dBm Q5.2) */
+ #define  SSB_SPROM8_AGAIN0		0x00FF	/* Antenna 0 */
+ #define  SSB_SPROM8_AGAIN0_SHIFT	0
+ #define  SSB_SPROM8_AGAIN1		0xFF00	/* Antenna 1 */
+ #define  SSB_SPROM8_AGAIN1_SHIFT	8
+-#define SSB_SPROM8_AGAIN23		0x10A0
++#define SSB_SPROM8_AGAIN23		0x00A0
+ #define  SSB_SPROM8_AGAIN2		0x00FF	/* Antenna 2 */
+ #define  SSB_SPROM8_AGAIN2_SHIFT	0
+ #define  SSB_SPROM8_AGAIN3		0xFF00	/* Antenna 3 */
+ #define  SSB_SPROM8_AGAIN3_SHIFT	8
+-#define SSB_SPROM8_GPIOA		0x1096	/*Gen. Purpose IO # 0 and 1 */
+-#define  SSB_SPROM8_GPIOA_P0		0x00FF	/* Pin 0 */
+-#define  SSB_SPROM8_GPIOA_P1		0xFF00	/* Pin 1 */
+-#define  SSB_SPROM8_GPIOA_P1_SHIFT	8
+-#define SSB_SPROM8_GPIOB		0x1098	/* Gen. Purpose IO # 2 and 3 */
+-#define  SSB_SPROM8_GPIOB_P2		0x00FF	/* Pin 2 */
+-#define  SSB_SPROM8_GPIOB_P3		0xFF00	/* Pin 3 */
+-#define  SSB_SPROM8_GPIOB_P3_SHIFT	8
+-#define SSB_SPROM8_MAXP_BG		0x10C0  /* Max Power BG in path 1 */
+-#define  SSB_SPROM8_MAXP_BG_MASK	0x00FF  /* Mask for Max Power BG */
++#define SSB_SPROM8_RSSIPARM2G		0x00A4	/* RSSI params for 2GHz */
++#define  SSB_SPROM8_RSSISMF2G		0x000F
++#define  SSB_SPROM8_RSSISMC2G		0x00F0
++#define  SSB_SPROM8_RSSISMC2G_SHIFT	4
++#define  SSB_SPROM8_RSSISAV2G		0x0700
++#define  SSB_SPROM8_RSSISAV2G_SHIFT	8
++#define  SSB_SPROM8_BXA2G		0x1800
++#define  SSB_SPROM8_BXA2G_SHIFT		11
++#define SSB_SPROM8_RSSIPARM5G		0x00A6	/* RSSI params for 5GHz */
++#define  SSB_SPROM8_RSSISMF5G		0x000F
++#define  SSB_SPROM8_RSSISMC5G		0x00F0
++#define  SSB_SPROM8_RSSISMC5G_SHIFT	4
++#define  SSB_SPROM8_RSSISAV5G		0x0700
++#define  SSB_SPROM8_RSSISAV5G_SHIFT	8
++#define  SSB_SPROM8_BXA5G		0x1800
++#define  SSB_SPROM8_BXA5G_SHIFT		11
++#define SSB_SPROM8_TRI25G		0x00A8	/* TX isolation 2.4&5.3GHz */
++#define  SSB_SPROM8_TRI2G		0x00FF	/* TX isolation 2.4GHz */
++#define  SSB_SPROM8_TRI5G		0xFF00	/* TX isolation 5.3GHz */
++#define  SSB_SPROM8_TRI5G_SHIFT		8
++#define SSB_SPROM8_TRI5GHL		0x00AA	/* TX isolation 5.2/5.8GHz */
++#define  SSB_SPROM8_TRI5GL		0x00FF	/* TX isolation 5.2GHz */
++#define  SSB_SPROM8_TRI5GH		0xFF00	/* TX isolation 5.8GHz */
++#define  SSB_SPROM8_TRI5GH_SHIFT	8
++#define SSB_SPROM8_RXPO			0x00AC  /* RX power offsets */
++#define  SSB_SPROM8_RXPO2G		0x00FF	/* 2GHz RX power offset */
++#define  SSB_SPROM8_RXPO5G		0xFF00	/* 5GHz RX power offset */
++#define  SSB_SPROM8_RXPO5G_SHIFT	8
++#define SSB_SPROM8_MAXP_BG		0x00C0  /* Max Power 2GHz in path 1 */
++#define  SSB_SPROM8_MAXP_BG_MASK	0x00FF  /* Mask for Max Power 2GHz */
+ #define  SSB_SPROM8_ITSSI_BG		0xFF00	/* Mask for path 1 itssi_bg */
+ #define  SSB_SPROM8_ITSSI_BG_SHIFT	8
+-#define SSB_SPROM8_MAXP_A		0x10C8  /* Max Power A in path 1 */
+-#define  SSB_SPROM8_MAXP_A_MASK		0x00FF  /* Mask for Max Power A */
++#define SSB_SPROM8_PA0B0		0x00C2	/* 2GHz power amp settings */
++#define SSB_SPROM8_PA0B1		0x00C4
++#define SSB_SPROM8_PA0B2		0x00C6
++#define SSB_SPROM8_MAXP_A		0x00C8  /* Max Power 5.3GHz */
++#define  SSB_SPROM8_MAXP_A_MASK		0x00FF  /* Mask for Max Power 5.3GHz */
+ #define  SSB_SPROM8_ITSSI_A		0xFF00	/* Mask for path 1 itssi_a */
+ #define  SSB_SPROM8_ITSSI_A_SHIFT	8
++#define SSB_SPROM8_MAXP_AHL		0x00CA  /* Max Power 5.2/5.8GHz */
++#define  SSB_SPROM8_MAXP_AH_MASK	0x00FF  /* Mask for Max Power 5.8GHz */
++#define  SSB_SPROM8_MAXP_AL_MASK	0xFF00  /* Mask for Max Power 5.2GHz */
++#define  SSB_SPROM8_MAXP_AL_SHIFT	8
++#define SSB_SPROM8_PA1B0		0x00CC	/* 5.3GHz power amp settings */
++#define SSB_SPROM8_PA1B1		0x00CE
++#define SSB_SPROM8_PA1B2		0x00D0
++#define SSB_SPROM8_PA1LOB0		0x00D2	/* 5.2GHz power amp settings */
++#define SSB_SPROM8_PA1LOB1		0x00D4
++#define SSB_SPROM8_PA1LOB2		0x00D6
++#define SSB_SPROM8_PA1HIB0		0x00D8	/* 5.8GHz power amp settings */
++#define SSB_SPROM8_PA1HIB1		0x00DA
++#define SSB_SPROM8_PA1HIB2		0x00DC
++#define SSB_SPROM8_CCK2GPO		0x0140	/* CCK power offset */
++#define SSB_SPROM8_OFDM2GPO		0x0142	/* 2.4GHz OFDM power offset */
++#define SSB_SPROM8_OFDM5GPO		0x0146	/* 5.3GHz OFDM power offset */
++#define SSB_SPROM8_OFDM5GLPO		0x014A	/* 5.2GHz OFDM power offset */
++#define SSB_SPROM8_OFDM5GHPO		0x014E	/* 5.8GHz OFDM power offset */
+ 
+ /* Values for SSB_SPROM1_BINF_CCODE */
+ enum {
+--- a/drivers/ssb/scan.c
++++ b/drivers/ssb/scan.c
+@@ -162,6 +162,8 @@ static u8 chipid_to_nrcores(u16 chipid)
+ static u32 scan_read32(struct ssb_bus *bus, u8 current_coreidx,
+ 		       u16 offset)
+ {
++	u32 lo, hi;
++
+ 	switch (bus->bustype) {
+ 	case SSB_BUSTYPE_SSB:
+ 		offset += current_coreidx * SSB_CORE_SIZE;
+@@ -174,6 +176,10 @@ static u32 scan_read32(struct ssb_bus *b
+ 			offset -= 0x800;
+ 		} else
+ 			ssb_pcmcia_switch_segment(bus, 0);
++		lo = readw(bus->mmio + offset);
++		hi = readw(bus->mmio + offset + 2);
++		return lo | (hi << 16);
++	default:
+ 		break;
+ 	}
+ 	return readl(bus->mmio + offset);
+@@ -188,6 +194,8 @@ static int scan_switchcore(struct ssb_bu
+ 		return ssb_pci_switch_coreidx(bus, coreidx);
+ 	case SSB_BUSTYPE_PCMCIA:
+ 		return ssb_pcmcia_switch_coreidx(bus, coreidx);
++	default:
++		break;
+ 	}
+ 	return 0;
+ }
+@@ -206,6 +214,8 @@ void ssb_iounmap(struct ssb_bus *bus)
+ 		SSB_BUG_ON(1); /* Can't reach this code. */
+ #endif
+ 		break;
++	default:
++		break;
+ 	}
+ 	bus->mmio = NULL;
+ 	bus->mapped_device = NULL;
+@@ -230,6 +240,8 @@ static void __iomem *ssb_ioremap(struct 
+ 		SSB_BUG_ON(1); /* Can't reach this code. */
+ #endif
+ 		break;
++	default:
++		break;
+ 	}
+ 
+ 	return mmio;
+@@ -339,7 +351,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ 		dev->bus = bus;
+ 		dev->ops = bus->ops;
+ 
+-		ssb_dprintk(KERN_INFO PFX
++		printk(KERN_DEBUG PFX
+ 			    "Core %d found: %s "
+ 			    "(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n",
+ 			    i, ssb_core_name(dev->id.coreid),
+--- a/drivers/ssb/driver_chipcommon.c
++++ b/drivers/ssb/driver_chipcommon.c
+@@ -233,6 +233,8 @@ void ssb_chipcommon_init(struct ssb_chip
+ {
+ 	if (!cc->dev)
+ 		return; /* We don't have a ChipCommon */
++	if (cc->dev->id.revision >= 11)
++		cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
+ 	ssb_pmu_init(cc);
+ 	chipco_powercontrol_init(cc);
+ 	ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
+@@ -370,6 +372,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c
+ {
+ 	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
+ }
++EXPORT_SYMBOL(ssb_chipco_gpio_control);
+ 
+ u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
+ {
+--- a/drivers/ssb/driver_mipscore.c
++++ b/drivers/ssb/driver_mipscore.c
+@@ -49,29 +49,54 @@ static const u32 ipsflag_irq_shift[] = {
+ 
+ static inline u32 ssb_irqflag(struct ssb_device *dev)
+ {
+-	return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG;
++	u32 tpsflag = ssb_read32(dev, SSB_TPSFLAG);
++	if (tpsflag)
++		return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG;
++	else
++		/* not irq supported */
++		return 0x3f;
++}
++
++static struct ssb_device *find_device(struct ssb_device *rdev, int irqflag)
++{
++	struct ssb_bus *bus = rdev->bus;
++	int i;
++	for (i = 0; i < bus->nr_devices; i++) {
++		struct ssb_device *dev;
++		dev = &(bus->devices[i]);
++		if (ssb_irqflag(dev) == irqflag)
++			return dev;
++	}
++	return NULL;
+ }
+ 
+ /* Get the MIPS IRQ assignment for a specified device.
+  * If unassigned, 0 is returned.
++ * If disabled, 5 is returned.
++ * If not supported, 6 is returned.
+  */
+ unsigned int ssb_mips_irq(struct ssb_device *dev)
+ {
+ 	struct ssb_bus *bus = dev->bus;
++	struct ssb_device *mdev = bus->mipscore.dev;
+ 	u32 irqflag;
+ 	u32 ipsflag;
+ 	u32 tmp;
+ 	unsigned int irq;
+ 
+ 	irqflag = ssb_irqflag(dev);
++	if (irqflag == 0x3f)
++		return 6;
+ 	ipsflag = ssb_read32(bus->mipscore.dev, SSB_IPSFLAG);
+ 	for (irq = 1; irq <= 4; irq++) {
+ 		tmp = ((ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq]);
+ 		if (tmp == irqflag)
+ 			break;
+ 	}
+-	if (irq	== 5)
+-		irq = 0;
++	if (irq	== 5) {
++		if ((1 << irqflag) & ssb_read32(mdev, SSB_INTVEC))
++			irq = 0;
++	}
+ 
+ 	return irq;
+ }
+@@ -97,25 +122,56 @@ static void set_irq(struct ssb_device *d
+ 	struct ssb_device *mdev = bus->mipscore.dev;
+ 	u32 irqflag = ssb_irqflag(dev);
+ 
++	BUG_ON(oldirq == 6);
++
+ 	dev->irq = irq + 2;
+ 
+-	ssb_dprintk(KERN_INFO PFX
+-		    "set_irq: core 0x%04x, irq %d => %d\n",
+-		    dev->id.coreid, oldirq, irq);
+ 	/* clear the old irq */
+ 	if (oldirq == 0)
+ 		ssb_write32(mdev, SSB_INTVEC, (~(1 << irqflag) & ssb_read32(mdev, SSB_INTVEC)));
+-	else
++	else if (oldirq != 5)
+ 		clear_irq(bus, oldirq);
+ 
+ 	/* assign the new one */
+ 	if (irq == 0) {
+ 		ssb_write32(mdev, SSB_INTVEC, ((1 << irqflag) | ssb_read32(mdev, SSB_INTVEC)));
+ 	} else {
++		u32 ipsflag = ssb_read32(mdev, SSB_IPSFLAG);
++		if ((ipsflag & ipsflag_irq_mask[irq]) != ipsflag_irq_mask[irq]) {
++			u32 oldipsflag = (ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq];
++			struct ssb_device *olddev = find_device(dev, oldipsflag);
++			if (olddev)
++				set_irq(olddev, 0);
++		}
+ 		irqflag <<= ipsflag_irq_shift[irq];
+-		irqflag |= (ssb_read32(mdev, SSB_IPSFLAG) & ~ipsflag_irq_mask[irq]);
++		irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]);
+ 		ssb_write32(mdev, SSB_IPSFLAG, irqflag);
+ 	}
++	ssb_dprintk(KERN_INFO PFX
++		    "set_irq: core 0x%04x, irq %d => %d\n",
++		    dev->id.coreid, oldirq+2, irq+2);
++}
++
++static void print_irq(struct ssb_device *dev, unsigned int irq)
++{
++	int i;
++	static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
++	ssb_dprintk(KERN_INFO PFX
++		"core 0x%04x, irq :", dev->id.coreid);
++	for (i = 0; i <= 6; i++) {
++		ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" ");
++	}
++	ssb_dprintk("\n");
++}
++
++static void dump_irq(struct ssb_bus *bus)
++{
++	int i;
++	for (i = 0; i < bus->nr_devices; i++) {
++		struct ssb_device *dev;
++		dev = &(bus->devices[i]);
++		print_irq(dev, ssb_mips_irq(dev));
++	}
+ }
+ 
+ static void ssb_mips_serial_init(struct ssb_mipscore *mcore)
+@@ -197,17 +253,23 @@ void ssb_mipscore_init(struct ssb_mipsco
+ 
+ 	/* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */
+ 	for (irq = 2, i = 0; i < bus->nr_devices; i++) {
++		int mips_irq;
+ 		dev = &(bus->devices[i]);
+-		dev->irq = ssb_mips_irq(dev) + 2;
++		mips_irq = ssb_mips_irq(dev);
++		if (mips_irq > 4)
++			dev->irq = 0;
++		else
++			dev->irq = mips_irq + 2;
++		if (dev->irq > 5)
++			continue;
+ 		switch (dev->id.coreid) {
+ 		case SSB_DEV_USB11_HOST:
+ 			/* shouldn't need a separate irq line for non-4710, most of them have a proper
+ 			 * external usb controller on the pci */
+ 			if ((bus->chip_id == 0x4710) && (irq <= 4)) {
+ 				set_irq(dev, irq++);
+-				break;
+ 			}
+-			/* fallthrough */
++			break;
+ 		case SSB_DEV_PCI:
+ 		case SSB_DEV_ETHERNET:
+ 		case SSB_DEV_ETHERNET_GBIT:
+@@ -218,8 +280,14 @@ void ssb_mipscore_init(struct ssb_mipsco
+ 				set_irq(dev, irq++);
+ 				break;
+ 			}
++			/* fallthrough */
++		case SSB_DEV_EXTIF:
++			set_irq(dev, 0);
++			break;
+ 		}
+ 	}
++	ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n");
++	dump_irq(bus);
+ 
+ 	ssb_mips_serial_init(mcore);
+ 	ssb_mips_flash_detect(mcore);
+--- a/drivers/ssb/sprom.c
++++ b/drivers/ssb/sprom.c
+@@ -13,6 +13,9 @@
+ 
+ #include "ssb_private.h"
+ 
++#include <linux/ctype.h>
++#include <linux/slab.h>
++
+ 
+ static const struct ssb_sprom *fallback_sprom;
+ 
+@@ -33,17 +36,27 @@ static int sprom2hex(const u16 *sprom, c
+ static int hex2sprom(u16 *sprom, const char *dump, size_t len,
+ 		     size_t sprom_size_words)
+ {
+-	char tmp[5] = { 0 };
+-	int cnt = 0;
++	char c, tmp[5] = { 0 };
++	int err, cnt = 0;
+ 	unsigned long parsed;
+ 
+-	if (len < sprom_size_words * 2)
++	/* Strip whitespace at the end. */
++	while (len) {
++		c = dump[len - 1];
++		if (!isspace(c) && c != '\0')
++			break;
++		len--;
++	}
++	/* Length must match exactly. */
++	if (len != sprom_size_words * 4)
+ 		return -EINVAL;
+ 
+ 	while (cnt < sprom_size_words) {
+ 		memcpy(tmp, dump, 4);
+ 		dump += 4;
+-		parsed = simple_strtoul(tmp, NULL, 16);
++		err = strict_strtoul(tmp, 16, &parsed);
++		if (err)
++			return err;
+ 		sprom[cnt++] = swab16((u16)parsed);
+ 	}
+ 
+@@ -90,6 +103,7 @@ ssize_t ssb_attr_sprom_store(struct ssb_
+ 	u16 *sprom;
+ 	int res = 0, err = -ENOMEM;
+ 	size_t sprom_size_words = bus->sprom_size;
++	struct ssb_freeze_context freeze;
+ 
+ 	sprom = kcalloc(bus->sprom_size, sizeof(u16), GFP_KERNEL);
+ 	if (!sprom)
+@@ -111,18 +125,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_
+ 	err = -ERESTARTSYS;
+ 	if (mutex_lock_interruptible(&bus->sprom_mutex))
+ 		goto out_kfree;
+-	err = ssb_devices_freeze(bus);
+-	if (err == -EOPNOTSUPP) {
+-		ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze devices. "
+-			   "No suspend support. Is CONFIG_PM enabled?\n");
+-		goto out_unlock;
+-	}
++	err = ssb_devices_freeze(bus, &freeze);
+ 	if (err) {
+ 		ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n");
+ 		goto out_unlock;
+ 	}
+ 	res = sprom_write(bus, sprom);
+-	err = ssb_devices_thaw(bus);
++	err = ssb_devices_thaw(&freeze);
+ 	if (err)
+ 		ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n");
+ out_unlock:
+@@ -167,3 +176,17 @@ const struct ssb_sprom *ssb_get_fallback
+ {
+ 	return fallback_sprom;
+ }
++
++/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
++bool ssb_is_sprom_available(struct ssb_bus *bus)
++{
++	/* status register only exists on chipcomon rev >= 11 and we need check
++	   for >= 31 only */
++	/* this routine differs from specs as we do not access SPROM directly
++	   on PCMCIA */
++	if (bus->bustype == SSB_BUSTYPE_PCI &&
++	    bus->chipco.dev->id.revision >= 31)
++		return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM;
++
++	return true;
++}
+--- a/drivers/ssb/ssb_private.h
++++ b/drivers/ssb/ssb_private.h
+@@ -136,19 +136,27 @@ extern const struct ssb_sprom *ssb_get_f
+ 
+ /* core.c */
+ extern u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m);
+-extern int ssb_devices_freeze(struct ssb_bus *bus);
+-extern int ssb_devices_thaw(struct ssb_bus *bus);
+ extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev);
+ int ssb_for_each_bus_call(unsigned long data,
+ 			  int (*func)(struct ssb_bus *bus, unsigned long data));
+ extern struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev);
+ 
++struct ssb_freeze_context {
++	/* Pointer to the bus */
++	struct ssb_bus *bus;
++	/* Boolean list to indicate whether a device is frozen on this bus. */
++	bool device_frozen[SSB_MAX_NR_CORES];
++};
++extern int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx);
++extern int ssb_devices_thaw(struct ssb_freeze_context *ctx);
++
++
+ 
+ /* b43_pci_bridge.c */
+ #ifdef CONFIG_SSB_B43_PCI_BRIDGE
+ extern int __init b43_pci_ssb_bridge_init(void);
+ extern void __exit b43_pci_ssb_bridge_exit(void);
+-#else /* CONFIG_SSB_B43_PCI_BRIDGR */
++#else /* CONFIG_SSB_B43_PCI_BRIDGE */
+ static inline int b43_pci_ssb_bridge_init(void)
+ {
+ 	return 0;
+@@ -156,6 +164,6 @@ static inline int b43_pci_ssb_bridge_ini
+ static inline void b43_pci_ssb_bridge_exit(void)
+ {
+ }
+-#endif /* CONFIG_SSB_PCIHOST */
++#endif /* CONFIG_SSB_B43_PCI_BRIDGE */
+ 
+ #endif /* LINUX_SSB_PRIVATE_H_ */
diff --git a/target/linux/generic/patches-2.6.30/942-ssb_add_dma_dev.patch b/target/linux/generic/patches-2.6.30/942-ssb_add_dma_dev.patch
new file mode 100644
index 0000000000..6b57e876cf
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/942-ssb_add_dma_dev.patch
@@ -0,0 +1,29 @@
+--- a/drivers/ssb/main.c
++++ b/drivers/ssb/main.c
+@@ -465,6 +465,7 @@ static int ssb_devices_register(struct s
+ #ifdef CONFIG_SSB_PCIHOST
+ 			sdev->irq = bus->host_pci->irq;
+ 			dev->parent = &bus->host_pci->dev;
++			sdev->dma_dev = dev->parent;
+ #endif
+ 			break;
+ 		case SSB_BUSTYPE_PCMCIA:
+@@ -475,6 +476,7 @@ static int ssb_devices_register(struct s
+ 			break;
+ 		case SSB_BUSTYPE_SSB:
+ 			dev->dma_mask = &dev->coherent_dma_mask;
++			sdev->dma_dev = dev;
+ 			break;
+ 		default:
+ 			break;
+--- a/include/linux/ssb/ssb.h
++++ b/include/linux/ssb/ssb.h
+@@ -167,7 +167,7 @@ struct ssb_device {
+ 	 * is an optimization. */
+ 	const struct ssb_bus_ops *ops;
+ 
+-	struct device *dev;
++	struct device *dev, *dma_dev;
+ 
+ 	struct ssb_bus *bus;
+ 	struct ssb_device_id id;
diff --git a/target/linux/generic/patches-2.6.30/951-revert_gcc4_4_fixes.patch b/target/linux/generic/patches-2.6.30/951-revert_gcc4_4_fixes.patch
new file mode 100644
index 0000000000..26265ab323
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/951-revert_gcc4_4_fixes.patch
@@ -0,0 +1,524 @@
+--- a/arch/powerpc/boot/crtsavres.S
++++ /dev/null
+@@ -1,233 +0,0 @@
+-/*
+- * Special support for eabi and SVR4
+- *
+- *   Copyright (C) 1995, 1996, 1998, 2000, 2001 Free Software Foundation, Inc.
+- *   Copyright 2008 Freescale Semiconductor, Inc.
+- *   Written By Michael Meissner
+- *
+- * Based on gcc/config/rs6000/crtsavres.asm from gcc
+- *
+- * This file is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License as published by the
+- * Free Software Foundation; either version 2, or (at your option) any
+- * later version.
+- *
+- * In addition to the permissions in the GNU General Public License, the
+- * Free Software Foundation gives you unlimited permission to link the
+- * compiled version of this file with other programs, and to distribute
+- * those programs without any restriction coming from the use of this
+- * file.  (The General Public License restrictions do apply in other
+- * respects; for example, they cover modification of the file, and
+- * distribution when not linked into another program.)
+- *
+- * This file is distributed in the hope that it will be useful, but
+- * WITHOUT ANY WARRANTY; without even the implied warranty of
+- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+- * General Public License for more details.
+- *
+- * You should have received a copy of the GNU General Public License
+- * along with this program; see the file COPYING.  If not, write to
+- * the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+- * Boston, MA 02110-1301, USA.
+- *
+- *    As a special exception, if you link this library with files
+- *    compiled with GCC to produce an executable, this does not cause
+- *    the resulting executable to be covered by the GNU General Public License.
+- *    This exception does not however invalidate any other reasons why
+- *    the executable file might be covered by the GNU General Public License.
+- */
+-
+-	.file	"crtsavres.S"
+-	.section ".text"
+-
+-/* On PowerPC64 Linux, these functions are provided by the linker.  */
+-#ifndef __powerpc64__
+-
+-#define _GLOBAL(name) \
+-	.type name,@function; \
+-	.globl name; \
+-name:
+-
+-/* Routines for saving integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer save area.  */
+-
+-_GLOBAL(_savegpr_14)
+-_GLOBAL(_save32gpr_14)
+-	stw	14,-72(11)	/* save gp registers */
+-_GLOBAL(_savegpr_15)
+-_GLOBAL(_save32gpr_15)
+-	stw	15,-68(11)
+-_GLOBAL(_savegpr_16)
+-_GLOBAL(_save32gpr_16)
+-	stw	16,-64(11)
+-_GLOBAL(_savegpr_17)
+-_GLOBAL(_save32gpr_17)
+-	stw	17,-60(11)
+-_GLOBAL(_savegpr_18)
+-_GLOBAL(_save32gpr_18)
+-	stw	18,-56(11)
+-_GLOBAL(_savegpr_19)
+-_GLOBAL(_save32gpr_19)
+-	stw	19,-52(11)
+-_GLOBAL(_savegpr_20)
+-_GLOBAL(_save32gpr_20)
+-	stw	20,-48(11)
+-_GLOBAL(_savegpr_21)
+-_GLOBAL(_save32gpr_21)
+-	stw	21,-44(11)
+-_GLOBAL(_savegpr_22)
+-_GLOBAL(_save32gpr_22)
+-	stw	22,-40(11)
+-_GLOBAL(_savegpr_23)
+-_GLOBAL(_save32gpr_23)
+-	stw	23,-36(11)
+-_GLOBAL(_savegpr_24)
+-_GLOBAL(_save32gpr_24)
+-	stw	24,-32(11)
+-_GLOBAL(_savegpr_25)
+-_GLOBAL(_save32gpr_25)
+-	stw	25,-28(11)
+-_GLOBAL(_savegpr_26)
+-_GLOBAL(_save32gpr_26)
+-	stw	26,-24(11)
+-_GLOBAL(_savegpr_27)
+-_GLOBAL(_save32gpr_27)
+-	stw	27,-20(11)
+-_GLOBAL(_savegpr_28)
+-_GLOBAL(_save32gpr_28)
+-	stw	28,-16(11)
+-_GLOBAL(_savegpr_29)
+-_GLOBAL(_save32gpr_29)
+-	stw	29,-12(11)
+-_GLOBAL(_savegpr_30)
+-_GLOBAL(_save32gpr_30)
+-	stw	30,-8(11)
+-_GLOBAL(_savegpr_31)
+-_GLOBAL(_save32gpr_31)
+-	stw	31,-4(11)
+-	blr
+-
+-/* Routines for restoring integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer restore area.  */
+-
+-_GLOBAL(_restgpr_14)
+-_GLOBAL(_rest32gpr_14)
+-	lwz	14,-72(11)	/* restore gp registers */
+-_GLOBAL(_restgpr_15)
+-_GLOBAL(_rest32gpr_15)
+-	lwz	15,-68(11)
+-_GLOBAL(_restgpr_16)
+-_GLOBAL(_rest32gpr_16)
+-	lwz	16,-64(11)
+-_GLOBAL(_restgpr_17)
+-_GLOBAL(_rest32gpr_17)
+-	lwz	17,-60(11)
+-_GLOBAL(_restgpr_18)
+-_GLOBAL(_rest32gpr_18)
+-	lwz	18,-56(11)
+-_GLOBAL(_restgpr_19)
+-_GLOBAL(_rest32gpr_19)
+-	lwz	19,-52(11)
+-_GLOBAL(_restgpr_20)
+-_GLOBAL(_rest32gpr_20)
+-	lwz	20,-48(11)
+-_GLOBAL(_restgpr_21)
+-_GLOBAL(_rest32gpr_21)
+-	lwz	21,-44(11)
+-_GLOBAL(_restgpr_22)
+-_GLOBAL(_rest32gpr_22)
+-	lwz	22,-40(11)
+-_GLOBAL(_restgpr_23)
+-_GLOBAL(_rest32gpr_23)
+-	lwz	23,-36(11)
+-_GLOBAL(_restgpr_24)
+-_GLOBAL(_rest32gpr_24)
+-	lwz	24,-32(11)
+-_GLOBAL(_restgpr_25)
+-_GLOBAL(_rest32gpr_25)
+-	lwz	25,-28(11)
+-_GLOBAL(_restgpr_26)
+-_GLOBAL(_rest32gpr_26)
+-	lwz	26,-24(11)
+-_GLOBAL(_restgpr_27)
+-_GLOBAL(_rest32gpr_27)
+-	lwz	27,-20(11)
+-_GLOBAL(_restgpr_28)
+-_GLOBAL(_rest32gpr_28)
+-	lwz	28,-16(11)
+-_GLOBAL(_restgpr_29)
+-_GLOBAL(_rest32gpr_29)
+-	lwz	29,-12(11)
+-_GLOBAL(_restgpr_30)
+-_GLOBAL(_rest32gpr_30)
+-	lwz	30,-8(11)
+-_GLOBAL(_restgpr_31)
+-_GLOBAL(_rest32gpr_31)
+-	lwz	31,-4(11)
+-	blr
+-
+-/* Routines for restoring integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer restore area.  */
+-
+-_GLOBAL(_restgpr_14_x)
+-_GLOBAL(_rest32gpr_14_x)
+-	lwz	14,-72(11)	/* restore gp registers */
+-_GLOBAL(_restgpr_15_x)
+-_GLOBAL(_rest32gpr_15_x)
+-	lwz	15,-68(11)
+-_GLOBAL(_restgpr_16_x)
+-_GLOBAL(_rest32gpr_16_x)
+-	lwz	16,-64(11)
+-_GLOBAL(_restgpr_17_x)
+-_GLOBAL(_rest32gpr_17_x)
+-	lwz	17,-60(11)
+-_GLOBAL(_restgpr_18_x)
+-_GLOBAL(_rest32gpr_18_x)
+-	lwz	18,-56(11)
+-_GLOBAL(_restgpr_19_x)
+-_GLOBAL(_rest32gpr_19_x)
+-	lwz	19,-52(11)
+-_GLOBAL(_restgpr_20_x)
+-_GLOBAL(_rest32gpr_20_x)
+-	lwz	20,-48(11)
+-_GLOBAL(_restgpr_21_x)
+-_GLOBAL(_rest32gpr_21_x)
+-	lwz	21,-44(11)
+-_GLOBAL(_restgpr_22_x)
+-_GLOBAL(_rest32gpr_22_x)
+-	lwz	22,-40(11)
+-_GLOBAL(_restgpr_23_x)
+-_GLOBAL(_rest32gpr_23_x)
+-	lwz	23,-36(11)
+-_GLOBAL(_restgpr_24_x)
+-_GLOBAL(_rest32gpr_24_x)
+-	lwz	24,-32(11)
+-_GLOBAL(_restgpr_25_x)
+-_GLOBAL(_rest32gpr_25_x)
+-	lwz	25,-28(11)
+-_GLOBAL(_restgpr_26_x)
+-_GLOBAL(_rest32gpr_26_x)
+-	lwz	26,-24(11)
+-_GLOBAL(_restgpr_27_x)
+-_GLOBAL(_rest32gpr_27_x)
+-	lwz	27,-20(11)
+-_GLOBAL(_restgpr_28_x)
+-_GLOBAL(_rest32gpr_28_x)
+-	lwz	28,-16(11)
+-_GLOBAL(_restgpr_29_x)
+-_GLOBAL(_rest32gpr_29_x)
+-	lwz	29,-12(11)
+-_GLOBAL(_restgpr_30_x)
+-_GLOBAL(_rest32gpr_30_x)
+-	lwz	30,-8(11)
+-_GLOBAL(_restgpr_31_x)
+-_GLOBAL(_rest32gpr_31_x)
+-	lwz	0,4(11)
+-	lwz	31,-4(11)
+-	mtlr	0
+-	mr	1,11
+-	blr
+-#endif
+--- a/arch/powerpc/boot/Makefile
++++ b/arch/powerpc/boot/Makefile
+@@ -59,7 +59,7 @@ libfdtheader := fdt.h libfdt.h libfdt_in
+ $(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o): \
+ 	$(addprefix $(obj)/,$(libfdtheader))
+ 
+-src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
++src-wlib := string.S crt0.S stdio.c main.c \
+ 		$(libfdt) libfdt-wrapper.c \
+ 		ns16550.c serial.c simple_alloc.c div64.S util.S \
+ 		gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
+--- a/arch/powerpc/kernel/prom_init_check.sh
++++ b/arch/powerpc/kernel/prom_init_check.sh
+@@ -48,20 +48,6 @@ do
+ 		fi
+ 	done
+ 
+-	# ignore register save/restore funcitons
+-	if [ "${UNDEF:0:9}" = "_restgpr_" ]; then
+-		OK=1
+-	fi
+-	if [ "${UNDEF:0:11}" = "_rest32gpr_" ]; then
+-		OK=1
+-	fi
+-	if [ "${UNDEF:0:9}" = "_savegpr_" ]; then
+-		OK=1
+-	fi
+-	if [ "${UNDEF:0:11}" = "_save32gpr_" ]; then
+-		OK=1
+-	fi
+-
+ 	if [ $OK -eq 0 ]; then
+ 		ERROR=1
+ 		echo "Error: External symbol '$UNDEF' referenced" \
+--- a/arch/powerpc/lib/crtsavres.S
++++ /dev/null
+@@ -1,229 +0,0 @@
+-/*
+- * Special support for eabi and SVR4
+- *
+- *   Copyright (C) 1995, 1996, 1998, 2000, 2001 Free Software Foundation, Inc.
+- *   Copyright 2008 Freescale Semiconductor, Inc.
+- *   Written By Michael Meissner
+- *
+- * Based on gcc/config/rs6000/crtsavres.asm from gcc
+- *
+- * This file is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License as published by the
+- * Free Software Foundation; either version 2, or (at your option) any
+- * later version.
+- *
+- * In addition to the permissions in the GNU General Public License, the
+- * Free Software Foundation gives you unlimited permission to link the
+- * compiled version of this file with other programs, and to distribute
+- * those programs without any restriction coming from the use of this
+- * file.  (The General Public License restrictions do apply in other
+- * respects; for example, they cover modification of the file, and
+- * distribution when not linked into another program.)
+- *
+- * This file is distributed in the hope that it will be useful, but
+- * WITHOUT ANY WARRANTY; without even the implied warranty of
+- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+- * General Public License for more details.
+- *
+- * You should have received a copy of the GNU General Public License
+- * along with this program; see the file COPYING.  If not, write to
+- * the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+- * Boston, MA 02110-1301, USA.
+- *
+- *    As a special exception, if you link this library with files
+- *    compiled with GCC to produce an executable, this does not cause
+- *    the resulting executable to be covered by the GNU General Public License.
+- *    This exception does not however invalidate any other reasons why
+- *    the executable file might be covered by the GNU General Public License.
+- */
+-
+-#include <asm/ppc_asm.h>
+-
+-	.file	"crtsavres.S"
+-	.section ".text"
+-
+-#ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+-
+-/* Routines for saving integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer save area.  */
+-
+-_GLOBAL(_savegpr_14)
+-_GLOBAL(_save32gpr_14)
+-	stw	14,-72(11)	/* save gp registers */
+-_GLOBAL(_savegpr_15)
+-_GLOBAL(_save32gpr_15)
+-	stw	15,-68(11)
+-_GLOBAL(_savegpr_16)
+-_GLOBAL(_save32gpr_16)
+-	stw	16,-64(11)
+-_GLOBAL(_savegpr_17)
+-_GLOBAL(_save32gpr_17)
+-	stw	17,-60(11)
+-_GLOBAL(_savegpr_18)
+-_GLOBAL(_save32gpr_18)
+-	stw	18,-56(11)
+-_GLOBAL(_savegpr_19)
+-_GLOBAL(_save32gpr_19)
+-	stw	19,-52(11)
+-_GLOBAL(_savegpr_20)
+-_GLOBAL(_save32gpr_20)
+-	stw	20,-48(11)
+-_GLOBAL(_savegpr_21)
+-_GLOBAL(_save32gpr_21)
+-	stw	21,-44(11)
+-_GLOBAL(_savegpr_22)
+-_GLOBAL(_save32gpr_22)
+-	stw	22,-40(11)
+-_GLOBAL(_savegpr_23)
+-_GLOBAL(_save32gpr_23)
+-	stw	23,-36(11)
+-_GLOBAL(_savegpr_24)
+-_GLOBAL(_save32gpr_24)
+-	stw	24,-32(11)
+-_GLOBAL(_savegpr_25)
+-_GLOBAL(_save32gpr_25)
+-	stw	25,-28(11)
+-_GLOBAL(_savegpr_26)
+-_GLOBAL(_save32gpr_26)
+-	stw	26,-24(11)
+-_GLOBAL(_savegpr_27)
+-_GLOBAL(_save32gpr_27)
+-	stw	27,-20(11)
+-_GLOBAL(_savegpr_28)
+-_GLOBAL(_save32gpr_28)
+-	stw	28,-16(11)
+-_GLOBAL(_savegpr_29)
+-_GLOBAL(_save32gpr_29)
+-	stw	29,-12(11)
+-_GLOBAL(_savegpr_30)
+-_GLOBAL(_save32gpr_30)
+-	stw	30,-8(11)
+-_GLOBAL(_savegpr_31)
+-_GLOBAL(_save32gpr_31)
+-	stw	31,-4(11)
+-	blr
+-
+-/* Routines for restoring integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer restore area.  */
+-
+-_GLOBAL(_restgpr_14)
+-_GLOBAL(_rest32gpr_14)
+-	lwz	14,-72(11)	/* restore gp registers */
+-_GLOBAL(_restgpr_15)
+-_GLOBAL(_rest32gpr_15)
+-	lwz	15,-68(11)
+-_GLOBAL(_restgpr_16)
+-_GLOBAL(_rest32gpr_16)
+-	lwz	16,-64(11)
+-_GLOBAL(_restgpr_17)
+-_GLOBAL(_rest32gpr_17)
+-	lwz	17,-60(11)
+-_GLOBAL(_restgpr_18)
+-_GLOBAL(_rest32gpr_18)
+-	lwz	18,-56(11)
+-_GLOBAL(_restgpr_19)
+-_GLOBAL(_rest32gpr_19)
+-	lwz	19,-52(11)
+-_GLOBAL(_restgpr_20)
+-_GLOBAL(_rest32gpr_20)
+-	lwz	20,-48(11)
+-_GLOBAL(_restgpr_21)
+-_GLOBAL(_rest32gpr_21)
+-	lwz	21,-44(11)
+-_GLOBAL(_restgpr_22)
+-_GLOBAL(_rest32gpr_22)
+-	lwz	22,-40(11)
+-_GLOBAL(_restgpr_23)
+-_GLOBAL(_rest32gpr_23)
+-	lwz	23,-36(11)
+-_GLOBAL(_restgpr_24)
+-_GLOBAL(_rest32gpr_24)
+-	lwz	24,-32(11)
+-_GLOBAL(_restgpr_25)
+-_GLOBAL(_rest32gpr_25)
+-	lwz	25,-28(11)
+-_GLOBAL(_restgpr_26)
+-_GLOBAL(_rest32gpr_26)
+-	lwz	26,-24(11)
+-_GLOBAL(_restgpr_27)
+-_GLOBAL(_rest32gpr_27)
+-	lwz	27,-20(11)
+-_GLOBAL(_restgpr_28)
+-_GLOBAL(_rest32gpr_28)
+-	lwz	28,-16(11)
+-_GLOBAL(_restgpr_29)
+-_GLOBAL(_rest32gpr_29)
+-	lwz	29,-12(11)
+-_GLOBAL(_restgpr_30)
+-_GLOBAL(_rest32gpr_30)
+-	lwz	30,-8(11)
+-_GLOBAL(_restgpr_31)
+-_GLOBAL(_rest32gpr_31)
+-	lwz	31,-4(11)
+-	blr
+-
+-/* Routines for restoring integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer restore area.  */
+-
+-_GLOBAL(_restgpr_14_x)
+-_GLOBAL(_rest32gpr_14_x)
+-	lwz	14,-72(11)	/* restore gp registers */
+-_GLOBAL(_restgpr_15_x)
+-_GLOBAL(_rest32gpr_15_x)
+-	lwz	15,-68(11)
+-_GLOBAL(_restgpr_16_x)
+-_GLOBAL(_rest32gpr_16_x)
+-	lwz	16,-64(11)
+-_GLOBAL(_restgpr_17_x)
+-_GLOBAL(_rest32gpr_17_x)
+-	lwz	17,-60(11)
+-_GLOBAL(_restgpr_18_x)
+-_GLOBAL(_rest32gpr_18_x)
+-	lwz	18,-56(11)
+-_GLOBAL(_restgpr_19_x)
+-_GLOBAL(_rest32gpr_19_x)
+-	lwz	19,-52(11)
+-_GLOBAL(_restgpr_20_x)
+-_GLOBAL(_rest32gpr_20_x)
+-	lwz	20,-48(11)
+-_GLOBAL(_restgpr_21_x)
+-_GLOBAL(_rest32gpr_21_x)
+-	lwz	21,-44(11)
+-_GLOBAL(_restgpr_22_x)
+-_GLOBAL(_rest32gpr_22_x)
+-	lwz	22,-40(11)
+-_GLOBAL(_restgpr_23_x)
+-_GLOBAL(_rest32gpr_23_x)
+-	lwz	23,-36(11)
+-_GLOBAL(_restgpr_24_x)
+-_GLOBAL(_rest32gpr_24_x)
+-	lwz	24,-32(11)
+-_GLOBAL(_restgpr_25_x)
+-_GLOBAL(_rest32gpr_25_x)
+-	lwz	25,-28(11)
+-_GLOBAL(_restgpr_26_x)
+-_GLOBAL(_rest32gpr_26_x)
+-	lwz	26,-24(11)
+-_GLOBAL(_restgpr_27_x)
+-_GLOBAL(_rest32gpr_27_x)
+-	lwz	27,-20(11)
+-_GLOBAL(_restgpr_28_x)
+-_GLOBAL(_rest32gpr_28_x)
+-	lwz	28,-16(11)
+-_GLOBAL(_restgpr_29_x)
+-_GLOBAL(_rest32gpr_29_x)
+-	lwz	29,-12(11)
+-_GLOBAL(_restgpr_30_x)
+-_GLOBAL(_rest32gpr_30_x)
+-	lwz	30,-8(11)
+-_GLOBAL(_restgpr_31_x)
+-_GLOBAL(_rest32gpr_31_x)
+-	lwz	0,4(11)
+-	lwz	31,-4(11)
+-	mtlr	0
+-	mr	1,11
+-	blr
+-#endif
+--- a/arch/powerpc/lib/Makefile
++++ b/arch/powerpc/lib/Makefile
+@@ -11,7 +11,7 @@ CFLAGS_REMOVE_feature-fixups.o = -pg
+ 
+ obj-y			:= string.o alloc.o \
+ 			   checksum_$(CONFIG_WORD_SIZE).o
+-obj-$(CONFIG_PPC32)	+= div64.o copy_32.o crtsavres.o
++obj-$(CONFIG_PPC32)	+= div64.o copy_32.o
+ obj-$(CONFIG_HAS_IOMEM)	+= devres.o
+ 
+ obj-$(CONFIG_PPC64)	+= copypage_64.o copyuser_64.o \
+--- a/arch/powerpc/Makefile
++++ b/arch/powerpc/Makefile
+@@ -92,8 +92,6 @@ endif
+ else
+ 	KBUILD_CFLAGS += $(call cc-option,-mtune=power4)
+ endif
+-else
+-LDFLAGS_MODULE	+= arch/powerpc/lib/crtsavres.o
+ endif
+ 
+ ifeq ($(CONFIG_TUNE_CELL),y)
diff --git a/target/linux/generic/patches-2.6.30/960-arm_lzma_loader.patch b/target/linux/generic/patches-2.6.30/960-arm_lzma_loader.patch
new file mode 100644
index 0000000000..f159898ba8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/960-arm_lzma_loader.patch
@@ -0,0 +1,710 @@
+--- a/arch/arm/boot/compressed/Makefile
++++ b/arch/arm/boot/compressed/Makefile
+@@ -63,7 +63,7 @@ endif
+ 
+ SEDFLAGS	= s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
+ 
+-targets       := vmlinux vmlinux.lds piggy.gz piggy.o font.o font.c \
++targets       := vmlinux vmlinux.lds piggy.lzma piggy.o font.o font.c \
+ 		 head.o misc.o $(OBJS)
+ 
+ ifeq ($(CONFIG_FUNCTION_TRACER),y)
+@@ -96,10 +96,10 @@ $(obj)/vmlinux: $(obj)/vmlinux.lds $(obj
+ 	$(call if_changed,ld)
+ 	@:
+ 
+-$(obj)/piggy.gz: $(obj)/../Image FORCE
+-	$(call if_changed,gzip)
++$(obj)/piggy.lzma: $(obj)/../Image FORCE
++	$(call if_changed,lzma)
+ 
+-$(obj)/piggy.o:  $(obj)/piggy.gz FORCE
++$(obj)/piggy.o:  $(obj)/piggy.lzma FORCE
+ 
+ CFLAGS_font.o := -Dstatic=
+ 
+--- a/arch/arm/boot/compressed/misc.c
++++ b/arch/arm/boot/compressed/misc.c
+@@ -186,36 +186,10 @@ static inline __ptr_t memcpy(__ptr_t __d
+ 	return __dest;
+ }
+ 
+-/*
+- * gzip delarations
+- */
+-#define OF(args)  args
+-#define STATIC static
+-
+-typedef unsigned char  uch;
+-typedef unsigned short ush;
+-typedef unsigned long  ulg;
+-
+-#define WSIZE 0x8000		/* Window size must be at least 32k, */
++#define WSIZE 0x20000		/* Window size must be at least 128k, */
+ 				/* and a power of two */
+ 
+-static uch *inbuf;		/* input buffer */
+-static uch window[WSIZE];	/* Sliding window buffer */
+-
+-static unsigned insize;		/* valid bytes in inbuf */
+-static unsigned inptr;		/* index of next byte to be processed in inbuf */
+-static unsigned outcnt;		/* bytes in output buffer */
+-
+-/* gzip flag byte */
+-#define ASCII_FLAG   0x01 /* bit 0 set: file probably ascii text */
+-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
+-#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
+-#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
+-#define COMMENT      0x10 /* bit 4 set: file comment present */
+-#define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
+-#define RESERVED     0xC0 /* bit 6,7:   reserved */
+-
+-#define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf())
++static u8 window[WSIZE];	/* Sliding window buffer */
+ 
+ /* Diagnostic functions */
+ #ifdef DEBUG
+@@ -234,24 +208,21 @@ static unsigned outcnt;		/* bytes in out
+ #  define Tracecv(c,x)
+ #endif
+ 
+-static int  fill_inbuf(void);
+-static void flush_window(void);
+ static void error(char *m);
+ 
+ extern char input_data[];
+ extern char input_data_end[];
+ 
+-static uch *output_data;
+-static ulg output_ptr;
+-static ulg bytes_out;
++static unsigned long output_ptr;
++static unsigned long bytes_out;
+ 
+ static void error(char *m);
+ 
+ static void putstr(const char *);
+ 
+ extern int end;
+-static ulg free_mem_ptr;
+-static ulg free_mem_end_ptr;
++static unsigned long free_mem_ptr;
++static unsigned long free_mem_end_ptr;
+ 
+ #ifdef STANDALONE_DEBUG
+ #define NO_INFLATE_MALLOC
+@@ -259,50 +230,10 @@ static ulg free_mem_end_ptr;
+ 
+ #define ARCH_HAS_DECOMP_WDOG
+ 
+-#include "../../../../lib/inflate.c"
+-
+-/* ===========================================================================
+- * Fill the input buffer. This is called only when the buffer is empty
+- * and at least one byte is really needed.
+- */
+-int fill_inbuf(void)
+-{
+-	if (insize != 0)
+-		error("ran out of input data");
+-
+-	inbuf = input_data;
+-	insize = &input_data_end[0] - &input_data[0];
+-
+-	inptr = 1;
+-	return inbuf[0];
+-}
+-
+-/* ===========================================================================
+- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
+- * (Used for the decompressed data only.)
+- */
+-void flush_window(void)
+-{
+-	ulg c = crc;
+-	unsigned n;
+-	uch *in, *out, ch;
+-
+-	in = window;
+-	out = &output_data[output_ptr];
+-	for (n = 0; n < outcnt; n++) {
+-		ch = *out++ = *in++;
+-		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+-	}
+-	crc = c;
+-	bytes_out += (ulg)outcnt;
+-	output_ptr += (ulg)outcnt;
+-	outcnt = 0;
+-	putstr(".");
+-}
+-
+ #ifndef arch_error
+ #define arch_error(x)
+ #endif
++#include "unlzma.c"
+ 
+ static void error(char *x)
+ {
+@@ -317,20 +248,16 @@ static void error(char *x)
+ 
+ #ifndef STANDALONE_DEBUG
+ 
+-ulg
+-decompress_kernel(ulg output_start, ulg free_mem_ptr_p, ulg free_mem_ptr_end_p,
++unsigned long
++decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p, unsigned long free_mem_ptr_end_p,
+ 		  int arch_id)
+ {
+-	output_data		= (uch *)output_start;	/* Points to kernel start */
+-	free_mem_ptr		= free_mem_ptr_p;
+-	free_mem_end_ptr	= free_mem_ptr_end_p;
+ 	__machine_arch_type	= arch_id;
+ 
+ 	arch_decomp_setup();
+ 
+-	makecrc();
+ 	putstr("Uncompressing Linux...");
+-	gunzip();
++	output_ptr += unlzma((u8 *) output_start, input_data, window);
+ 	putstr(" done, booting the kernel.\n");
+ 	return output_ptr;
+ }
+@@ -340,11 +267,8 @@ char output_buffer[1500*1024];
+ 
+ int main()
+ {
+-	output_data = output_buffer;
+-
+-	makecrc();
+ 	putstr("Uncompressing Linux...");
+-	gunzip();
++	unlzma((u8 *) output_buffer, input_data, window);
+ 	putstr("done.\n");
+ 	return 0;
+ }
+--- a/arch/arm/boot/compressed/piggy.S
++++ b/arch/arm/boot/compressed/piggy.S
+@@ -1,6 +1,6 @@
+ 	.section .piggydata,#alloc
+ 	.globl	input_data
+ input_data:
+-	.incbin	"arch/arm/boot/compressed/piggy.gz"
++	.incbin	"arch/arm/boot/compressed/piggy.lzma"
+ 	.globl	input_data_end
+ input_data_end:
+--- /dev/null
++++ b/arch/arm/boot/compressed/unlzma.c
+@@ -0,0 +1,429 @@
++/*
++ * Copyright (c) 2009  Felix Fietkau <nbd@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2,
++ * or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * uncompress.c
++ */
++
++#include <linux/types.h>
++#include <asm/byteorder.h>
++#include "unlzma.h"
++
++struct unlzma_ctx {
++	const u8 *next_in;
++	u8 *next_out;
++	u8 *outbuf;
++
++	/* reader state */
++	u32 code;
++	u32 range;
++	u32 bound;
++
++	/* writer state */
++	u8 previous_byte;
++	ssize_t pos;
++
++	/* cstate */
++	int state;
++	u32 rep0, rep1, rep2, rep3;
++
++	void *workspace;
++} ctx;
++
++static int inbs = 0;
++static inline u8
++rc_read(void)
++{
++#if 0
++	if (unlikely(++inbs > 16 * 1024)) {
++		putstr(".");
++		inbs = 0;
++	}
++#endif
++	return *(ctx.next_in++);
++}
++
++
++static inline void
++rc_get_code(void)
++{
++	ctx.code = (ctx.code << 8) | rc_read();
++}
++
++static inline void
++rc_normalize(void)
++{
++	if (ctx.range < (1 << RC_TOP_BITS)) {
++		ctx.range <<= 8;
++		rc_get_code();
++	}
++}
++
++static inline int
++rc_is_bit_0(u16 *p)
++{
++	rc_normalize();
++	ctx.bound = *p * (ctx.range >> RC_MODEL_TOTAL_BITS);
++	return ctx.code < ctx.bound;
++}
++
++static inline void
++rc_update_bit_0(u16 *p)
++{
++	ctx.range = ctx.bound;
++	*p += ((1 << RC_MODEL_TOTAL_BITS) - *p) >> RC_MOVE_BITS;
++}
++
++static inline void
++rc_update_bit_1(u16 *p)
++{
++	ctx.range -= ctx.bound;
++	ctx.code -= ctx.bound;
++	*p -= *p >> RC_MOVE_BITS;
++}
++
++static inline bool
++rc_get_bit(u16 *p, int *symbol)
++{
++	if (rc_is_bit_0(p)) {
++		rc_update_bit_0(p);
++		*symbol *= 2;
++		return 0;
++	} else {
++		rc_update_bit_1(p);
++		*symbol = *symbol * 2 + 1;
++		return 1;
++	}
++}
++
++static inline int
++rc_direct_bit(void)
++{
++	rc_normalize();
++	ctx.range >>= 1;
++	if (ctx.code >= ctx.range) {
++		ctx.code -= ctx.range;
++		return 1;
++	}
++	return 0;
++}
++
++static inline void
++rc_bit_tree_decode(u16 *p, int num_levels, int *symbol)
++{
++	int i = num_levels;
++
++	*symbol = 1;
++	while (i--)
++		rc_get_bit(p + *symbol, symbol);
++	*symbol -= 1 << num_levels;
++}
++
++static inline u8
++peek_old_byte(u32 offs)
++{
++	u32 pos = ctx.pos - offs;
++	return ctx.outbuf[pos];
++}
++
++static inline void
++write_byte(u8 byte)
++{
++	ctx.previous_byte = byte;
++	*(ctx.next_out++) = byte;
++	ctx.pos++;
++}
++
++
++static inline void
++copy_byte(u32 offs)
++{
++	write_byte(peek_old_byte(offs));
++}
++
++static inline void
++copy_bytes(u32 rep0, int len)
++{
++	do {
++		copy_byte(rep0);
++		len--;
++	} while (len != 0);
++}
++
++static inline void
++process_bit0(u16 *p, int pos_state, u16 *prob,
++             int lc, u32 literal_pos_mask)
++{
++	int mi = 1;
++	rc_update_bit_0(prob);
++	prob = (p + LZMA_LITERAL +
++		(LZMA_LIT_SIZE
++		 * (((ctx.pos & literal_pos_mask) << lc)
++		    + (ctx.previous_byte >> (8 - lc))))
++		);
++
++	if (ctx.state >= LZMA_NUM_LIT_STATES) {
++		int match_byte = peek_old_byte(ctx.rep0);
++		do {
++			u16 bit;
++			u16 *prob_lit;
++
++			match_byte <<= 1;
++			bit = match_byte & 0x100;
++			prob_lit = prob + 0x100 + bit + mi;
++			if (rc_get_bit(prob_lit, &mi) != !!bit)
++				break;
++		} while (mi < 0x100);
++	}
++	while (mi < 0x100) {
++		u16 *prob_lit = prob + mi;
++		rc_get_bit(prob_lit, &mi);
++	}
++	write_byte(mi);
++	if (ctx.state < 4)
++		ctx.state = 0;
++	else if (ctx.state < 10)
++		ctx.state -= 3;
++	else
++		ctx.state -= 6;
++}
++
++static inline void
++process_bit1(u16 *p, int pos_state, u16 *prob)
++{
++	int offset;
++	u16 *prob_len;
++	int num_bits;
++	int len;
++
++	rc_update_bit_1(prob);
++	prob = p + LZMA_IS_REP + ctx.state;
++	if (rc_is_bit_0(prob)) {
++		rc_update_bit_0(prob);
++		ctx.rep3 = ctx.rep2;
++		ctx.rep2 = ctx.rep1;
++		ctx.rep1 = ctx.rep0;
++		ctx.state = ctx.state < LZMA_NUM_LIT_STATES ? 0 : 3;
++		prob = p + LZMA_LEN_CODER;
++	} else {
++		rc_update_bit_1(prob);
++		prob = p + LZMA_IS_REP_G0 + ctx.state;
++		if (rc_is_bit_0(prob)) {
++			rc_update_bit_0(prob);
++			prob = (p + LZMA_IS_REP_0_LONG
++				+ (ctx.state <<
++				   LZMA_NUM_POS_BITS_MAX) +
++				pos_state);
++			if (rc_is_bit_0(prob)) {
++				rc_update_bit_0(prob);
++
++				ctx.state = ctx.state < LZMA_NUM_LIT_STATES ?
++					9 : 11;
++				copy_byte(ctx.rep0);
++				return;
++			} else {
++				rc_update_bit_1(prob);
++			}
++		} else {
++			u32 distance;
++
++			rc_update_bit_1(prob);
++			prob = p + LZMA_IS_REP_G1 + ctx.state;
++			if (rc_is_bit_0(prob)) {
++				rc_update_bit_0(prob);
++				distance = ctx.rep1;
++			} else {
++				rc_update_bit_1(prob);
++				prob = p + LZMA_IS_REP_G2 + ctx.state;
++				if (rc_is_bit_0(prob)) {
++					rc_update_bit_0(prob);
++					distance = ctx.rep2;
++				} else {
++					rc_update_bit_1(prob);
++					distance = ctx.rep3;
++					ctx.rep3 = ctx.rep2;
++				}
++				ctx.rep2 = ctx.rep1;
++			}
++			ctx.rep1 = ctx.rep0;
++			ctx.rep0 = distance;
++		}
++		ctx.state = ctx.state < LZMA_NUM_LIT_STATES ? 8 : 11;
++		prob = p + LZMA_REP_LEN_CODER;
++	}
++
++	prob_len = prob + LZMA_LEN_CHOICE;
++	if (rc_is_bit_0(prob_len)) {
++		rc_update_bit_0(prob_len);
++		prob_len = (prob + LZMA_LEN_LOW
++			    + (pos_state <<
++			       LZMA_LEN_NUM_LOW_BITS));
++		offset = 0;
++		num_bits = LZMA_LEN_NUM_LOW_BITS;
++	} else {
++		rc_update_bit_1(prob_len);
++		prob_len = prob + LZMA_LEN_CHOICE_2;
++		if (rc_is_bit_0(prob_len)) {
++			rc_update_bit_0(prob_len);
++			prob_len = (prob + LZMA_LEN_MID
++				    + (pos_state <<
++				       LZMA_LEN_NUM_MID_BITS));
++			offset = 1 << LZMA_LEN_NUM_LOW_BITS;
++			num_bits = LZMA_LEN_NUM_MID_BITS;
++		} else {
++			rc_update_bit_1(prob_len);
++			prob_len = prob + LZMA_LEN_HIGH;
++			offset = ((1 << LZMA_LEN_NUM_LOW_BITS)
++				  + (1 << LZMA_LEN_NUM_MID_BITS));
++			num_bits = LZMA_LEN_NUM_HIGH_BITS;
++		}
++	}
++
++	rc_bit_tree_decode(prob_len, num_bits, &len);
++	len += offset;
++
++	if (ctx.state < 4) {
++		int pos_slot;
++
++		ctx.state += LZMA_NUM_LIT_STATES;
++		prob =
++			p + LZMA_POS_SLOT +
++			((len <
++			  LZMA_NUM_LEN_TO_POS_STATES ? len :
++			  LZMA_NUM_LEN_TO_POS_STATES - 1)
++			 << LZMA_NUM_POS_SLOT_BITS);
++		rc_bit_tree_decode(prob,
++				   LZMA_NUM_POS_SLOT_BITS,
++				   &pos_slot);
++		if (pos_slot >= LZMA_START_POS_MODEL_INDEX) {
++			int i, mi;
++			num_bits = (pos_slot >> 1) - 1;
++			ctx.rep0 = 2 | (pos_slot & 1);
++			if (pos_slot < LZMA_END_POS_MODEL_INDEX) {
++				ctx.rep0 <<= num_bits;
++				prob = p + LZMA_SPEC_POS +
++					ctx.rep0 - pos_slot - 1;
++			} else {
++				num_bits -= LZMA_NUM_ALIGN_BITS;
++				while (num_bits--)
++					ctx.rep0 = (ctx.rep0 << 1) |
++						rc_direct_bit();
++				prob = p + LZMA_ALIGN;
++				ctx.rep0 <<= LZMA_NUM_ALIGN_BITS;
++				num_bits = LZMA_NUM_ALIGN_BITS;
++			}
++			i = 1;
++			mi = 1;
++			while (num_bits--) {
++				if (rc_get_bit(prob + mi, &mi))
++					ctx.rep0 |= i;
++				i <<= 1;
++			}
++		} else
++			ctx.rep0 = pos_slot;
++		if (++(ctx.rep0) == 0)
++			return;
++	}
++
++	len += LZMA_MATCH_MIN_LEN;
++
++	copy_bytes(ctx.rep0, len);
++}
++
++
++static int
++do_unlzma(void)
++{
++	u8 hdr_buf[sizeof(struct lzma_header)];
++	struct lzma_header *header = (struct lzma_header *)hdr_buf;
++	u32 pos_state_mask;
++	u32 literal_pos_mask;
++	int lc, pb, lp;
++	int num_probs;
++	int i, mi;
++	u16 *p;
++
++	for (i = 0; i < sizeof(struct lzma_header); i++) {
++		hdr_buf[i] = rc_read();
++	}
++
++	ctx.pos = 0;
++	ctx.state = 0;
++	ctx.rep0 = ctx.rep1 = ctx.rep2 = ctx.rep3 = 1;
++
++	ctx.previous_byte = 0;
++	ctx.code = 0;
++	ctx.range = 0xFFFFFFFF;
++
++	if (header->pos >= (9 * 5 * 5))
++		return -1;
++
++	mi = 0;
++	lc = header->pos;
++	while (lc >= 9) {
++		mi++;
++		lc -= 9;
++	}
++	pb = 0;
++	lp = mi;
++	while (lp >= 5) {
++		pb++;
++		lp -= 5;
++	}
++	pos_state_mask = (1 << pb) - 1;
++	literal_pos_mask = (1 << lp) - 1;
++
++	p = (u16 *) ctx.workspace;
++	if (!p)
++		return -1;
++
++	num_probs = LZMA_LITERAL + (LZMA_LIT_SIZE << (lc + lp));
++	for (i = 0; i < num_probs; i++)
++		p[i] = (1 << RC_MODEL_TOTAL_BITS) >> 1;
++
++	for (i = 0; i < 5; i++)
++		rc_get_code();
++
++	while (1) {
++		int pos_state =	ctx.pos & pos_state_mask;
++		u16 *prob = p + LZMA_IS_MATCH +
++			(ctx.state << LZMA_NUM_POS_BITS_MAX) + pos_state;
++		if (rc_is_bit_0(prob))
++			process_bit0(p, pos_state, prob,
++				     lc, literal_pos_mask);
++		else {
++			process_bit1(p, pos_state, prob);
++			if (ctx.rep0 == 0)
++				break;
++		}
++	}
++
++	return ctx.pos;
++}
++
++
++static int unlzma(unsigned char *dest, const unsigned char *src, unsigned char *workspace)
++{
++	memset(&ctx, 0, sizeof(ctx));
++	ctx.outbuf = dest;
++	ctx.next_in = src;
++	ctx.next_out = dest;
++	ctx.workspace = workspace;
++
++	return do_unlzma();
++}
++
++
+--- /dev/null
++++ b/arch/arm/boot/compressed/unlzma.h
+@@ -0,0 +1,81 @@
++/* LZMA uncompresion module for pcomp
++ * Copyright (C) 2009  Felix Fietkau <nbd@openwrt.org>
++ *
++ * Based on:
++ *  Initial Linux kernel adaptation
++ *  Copyright (C) 2006  Alain < alain@knaff.lu >
++ *
++ *  Based on small lzma deflate implementation/Small range coder
++ *  implementation for lzma.
++ *  Copyright (C) 2006  Aurelien Jacobs < aurel@gnuage.org >
++ *
++ *  Based on LzmaDecode.c from the LZMA SDK 4.22 (http://www.7-zip.org/)
++ *  Copyright (C) 1999-2005  Igor Pavlov
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++#ifndef __UNLZMA_H
++#define __UNLZMA_H
++
++struct lzma_header {
++	__u8 pos;
++	__le32 dict_size;
++	__le64 uncompr_size;
++} __attribute__ ((packed));
++
++
++#define RC_TOP_BITS 24
++#define RC_MOVE_BITS 5
++#define RC_MODEL_TOTAL_BITS 11
++
++#define LZMA_BASE_SIZE 1846
++#define LZMA_LIT_SIZE 768
++
++#define LZMA_NUM_POS_BITS_MAX 4
++
++#define LZMA_LEN_NUM_LOW_BITS 3
++#define LZMA_LEN_NUM_MID_BITS 3
++#define LZMA_LEN_NUM_HIGH_BITS 8
++
++#define LZMA_LEN_CHOICE 0
++#define LZMA_LEN_CHOICE_2 (LZMA_LEN_CHOICE + 1)
++#define LZMA_LEN_LOW (LZMA_LEN_CHOICE_2 + 1)
++#define LZMA_LEN_MID (LZMA_LEN_LOW \
++		      + (1 << (LZMA_NUM_POS_BITS_MAX + LZMA_LEN_NUM_LOW_BITS)))
++#define LZMA_LEN_HIGH (LZMA_LEN_MID \
++		       +(1 << (LZMA_NUM_POS_BITS_MAX + LZMA_LEN_NUM_MID_BITS)))
++#define LZMA_NUM_LEN_PROBS (LZMA_LEN_HIGH + (1 << LZMA_LEN_NUM_HIGH_BITS))
++
++#define LZMA_NUM_STATES 12
++#define LZMA_NUM_LIT_STATES 7
++
++#define LZMA_START_POS_MODEL_INDEX 4
++#define LZMA_END_POS_MODEL_INDEX 14
++#define LZMA_NUM_FULL_DISTANCES (1 << (LZMA_END_POS_MODEL_INDEX >> 1))
++
++#define LZMA_NUM_POS_SLOT_BITS 6
++#define LZMA_NUM_LEN_TO_POS_STATES 4
++
++#define LZMA_NUM_ALIGN_BITS 4
++
++#define LZMA_MATCH_MIN_LEN 2
++
++#define LZMA_IS_MATCH 0
++#define LZMA_IS_REP (LZMA_IS_MATCH + (LZMA_NUM_STATES << LZMA_NUM_POS_BITS_MAX))
++#define LZMA_IS_REP_G0 (LZMA_IS_REP + LZMA_NUM_STATES)
++#define LZMA_IS_REP_G1 (LZMA_IS_REP_G0 + LZMA_NUM_STATES)
++#define LZMA_IS_REP_G2 (LZMA_IS_REP_G1 + LZMA_NUM_STATES)
++#define LZMA_IS_REP_0_LONG (LZMA_IS_REP_G2 + LZMA_NUM_STATES)
++#define LZMA_POS_SLOT (LZMA_IS_REP_0_LONG \
++		       + (LZMA_NUM_STATES << LZMA_NUM_POS_BITS_MAX))
++#define LZMA_SPEC_POS (LZMA_POS_SLOT \
++		       +(LZMA_NUM_LEN_TO_POS_STATES << LZMA_NUM_POS_SLOT_BITS))
++#define LZMA_ALIGN (LZMA_SPEC_POS \
++		    + LZMA_NUM_FULL_DISTANCES - LZMA_END_POS_MODEL_INDEX)
++#define LZMA_LEN_CODER (LZMA_ALIGN + (1 << LZMA_NUM_ALIGN_BITS))
++#define LZMA_REP_LEN_CODER (LZMA_LEN_CODER + LZMA_NUM_LEN_PROBS)
++#define LZMA_LITERAL (LZMA_REP_LEN_CODER + LZMA_NUM_LEN_PROBS)
++
++#endif
diff --git a/target/linux/generic/patches-2.6.30/965-arm_restore_sigmask_v2.patch b/target/linux/generic/patches-2.6.30/965-arm_restore_sigmask_v2.patch
new file mode 100644
index 0000000000..30acd0316b
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/965-arm_restore_sigmask_v2.patch
@@ -0,0 +1,354 @@
+From: Mikael Pettersson <mikpe@it.uu.se>
+Date: Sat, 15 Aug 2009 11:58:11 +0000 (+0100)
+Subject: ARM: 5677/1: ARM support for TIF_RESTORE_SIGMASK/pselect6/ppoll/epoll_pwait
+X-Git-Tag: next-20090817~86^2~1^6
+X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fnext%2Flinux-next.git;a=commitdiff_plain;h=369842658a36bcea28ecb643ba4bdb53919330dd
+
+ARM: 5677/1: ARM support for TIF_RESTORE_SIGMASK/pselect6/ppoll/epoll_pwait
+
+This patch adds support for TIF_RESTORE_SIGMASK to ARM's
+signal handling, which allows to hook up the pselect6, ppoll,
+and epoll_pwait syscalls on ARM.
+
+Tested here with eabi userspace and a test program with a
+deliberate race between a child's exit and the parent's
+sigprocmask/select sequence. Using sys_pselect6() instead
+of sigprocmask/select reliably prevents the race.
+
+The other arch's support for TIF_RESTORE_SIGMASK has evolved
+over time:
+
+In 2.6.16:
+- add TIF_RESTORE_SIGMASK which parallels TIF_SIGPENDING
+- test both when checking for pending signal [changed later]
+- reimplement sys_sigsuspend() to use current->saved_sigmask,
+  TIF_RESTORE_SIGMASK [changed later], and -ERESTARTNOHAND;
+  ditto for sys_rt_sigsuspend(), but drop private code and
+  use common code via __ARCH_WANT_SYS_RT_SIGSUSPEND;
+- there are now no "extra" calls to do_signal() so its oldset
+  parameter is always &current->blocked so need not be passed,
+  also its return value is changed to void
+- change handle_signal() to return 0/-errno
+- change do_signal() to honor TIF_RESTORE_SIGMASK:
+  + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK
+    is set
+  + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK
+  + if no signal was delivered and TIF_RESTORE_SIGMASK is set then
+    clear it and restore the sigmask
+- hook up sys_pselect6() and sys_ppoll()
+
+In 2.6.19:
+- hook up sys_epoll_pwait()
+
+In 2.6.26:
+- allow archs to override how TIF_RESTORE_SIGMASK is implemented;
+  default set_restore_sigmask() sets both TIF_RESTORE_SIGMASK and
+  TIF_SIGPENDING; archs need now just test TIF_SIGPENDING again
+  when checking for pending signal work; some archs now implement
+  TIF_RESTORE_SIGMASK as a secondary/non-atomic thread flag bit
+- call set_restore_sigmask() in sys_sigsuspend() instead of setting
+  TIF_RESTORE_SIGMASK
+
+In 2.6.29-rc:
+- kill sys_pselect7() which no arch wanted
+
+So for 2.6.31-rc6/ARM this patch does the following:
+- Add TIF_RESTORE_SIGMASK. Use the generic set_restore_sigmask()
+  which sets both TIF_SIGPENDING and TIF_RESTORE_SIGMASK, so
+  TIF_RESTORE_SIGMASK need not claim one of the scarce low thread
+  flags, and existing TIF_SIGPENDING and _TIF_WORK_MASK tests need
+  not be extended for TIF_RESTORE_SIGMASK.
+- sys_sigsuspend() is reimplemented to use current->saved_sigmask
+  and set_restore_sigmask(), making it identical to most other archs
+- The private code for sys_rt_sigsuspend() is removed, instead
+  generic code supplies it via __ARCH_WANT_SYS_RT_SIGSUSPEND.
+- sys_sigsuspend() and sys_rt_sigsuspend() no longer need a pt_regs
+  parameter, so their assembly code wrappers are removed.
+- handle_signal() is changed to return 0 on success or -errno.
+- The oldset parameter to do_signal() is now redundant and removed,
+  and the return value is now also redundant and changed to void.
+- do_signal() is changed to honor TIF_RESTORE_SIGMASK:
+  + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK
+    is set
+  + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK
+  + if no signal was delivered and TIF_RESTORE_SIGMASK is set then
+    clear it and restore the sigmask
+- Hook up sys_pselect6, sys_ppoll, and sys_epoll_pwait.
+
+Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
+Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
+---
+
+--- a/arch/arm/include/asm/thread_info.h
++++ b/arch/arm/include/asm/thread_info.h
+@@ -140,6 +140,7 @@ extern void vfp_sync_state(struct thread
+ #define TIF_USING_IWMMXT	17
+ #define TIF_MEMDIE		18
+ #define TIF_FREEZE		19
++#define TIF_RESTORE_SIGMASK	20
+ 
+ #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
+ #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+@@ -147,6 +148,7 @@ extern void vfp_sync_state(struct thread
+ #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
+ #define _TIF_USING_IWMMXT	(1 << TIF_USING_IWMMXT)
+ #define _TIF_FREEZE		(1 << TIF_FREEZE)
++#define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
+ 
+ /*
+  * Change these and you break ASM code in entry-common.S
+--- a/arch/arm/include/asm/unistd.h
++++ b/arch/arm/include/asm/unistd.h
+@@ -360,8 +360,8 @@
+ #define __NR_readlinkat			(__NR_SYSCALL_BASE+332)
+ #define __NR_fchmodat			(__NR_SYSCALL_BASE+333)
+ #define __NR_faccessat			(__NR_SYSCALL_BASE+334)
+-					/* 335 for pselect6 */
+-					/* 336 for ppoll */
++#define __NR_pselect6			(__NR_SYSCALL_BASE+335)
++#define __NR_ppoll			(__NR_SYSCALL_BASE+336)
+ #define __NR_unshare			(__NR_SYSCALL_BASE+337)
+ #define __NR_set_robust_list		(__NR_SYSCALL_BASE+338)
+ #define __NR_get_robust_list		(__NR_SYSCALL_BASE+339)
+@@ -372,7 +372,7 @@
+ #define __NR_vmsplice			(__NR_SYSCALL_BASE+343)
+ #define __NR_move_pages			(__NR_SYSCALL_BASE+344)
+ #define __NR_getcpu			(__NR_SYSCALL_BASE+345)
+-					/* 346 for epoll_pwait */
++#define __NR_epoll_pwait		(__NR_SYSCALL_BASE+346)
+ #define __NR_kexec_load			(__NR_SYSCALL_BASE+347)
+ #define __NR_utimensat			(__NR_SYSCALL_BASE+348)
+ #define __NR_signalfd			(__NR_SYSCALL_BASE+349)
+@@ -430,6 +430,7 @@
+ #define __ARCH_WANT_SYS_SIGPENDING
+ #define __ARCH_WANT_SYS_SIGPROCMASK
+ #define __ARCH_WANT_SYS_RT_SIGACTION
++#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+ 
+ #if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
+ #define __ARCH_WANT_SYS_TIME
+--- a/arch/arm/kernel/calls.S
++++ b/arch/arm/kernel/calls.S
+@@ -81,7 +81,7 @@
+ 		CALL(sys_ni_syscall)		/* was sys_ssetmask */
+ /* 70 */	CALL(sys_setreuid16)
+ 		CALL(sys_setregid16)
+-		CALL(sys_sigsuspend_wrapper)
++		CALL(sys_sigsuspend)
+ 		CALL(sys_sigpending)
+ 		CALL(sys_sethostname)
+ /* 75 */	CALL(sys_setrlimit)
+@@ -188,7 +188,7 @@
+ 		CALL(sys_rt_sigpending)
+ 		CALL(sys_rt_sigtimedwait)
+ 		CALL(sys_rt_sigqueueinfo)
+-		CALL(sys_rt_sigsuspend_wrapper)
++		CALL(sys_rt_sigsuspend)
+ /* 180 */	CALL(ABI(sys_pread64, sys_oabi_pread64))
+ 		CALL(ABI(sys_pwrite64, sys_oabi_pwrite64))
+ 		CALL(sys_chown16)
+@@ -344,8 +344,8 @@
+ 		CALL(sys_readlinkat)
+ 		CALL(sys_fchmodat)
+ 		CALL(sys_faccessat)
+-/* 335 */	CALL(sys_ni_syscall)		/* eventually pselect6 */
+-		CALL(sys_ni_syscall)		/* eventually ppoll */
++/* 335 */	CALL(sys_pselect6)
++		CALL(sys_ppoll)
+ 		CALL(sys_unshare)
+ 		CALL(sys_set_robust_list)
+ 		CALL(sys_get_robust_list)
+@@ -355,7 +355,7 @@
+ 		CALL(sys_vmsplice)
+ 		CALL(sys_move_pages)
+ /* 345 */	CALL(sys_getcpu)
+-		CALL(sys_ni_syscall)		/* eventually epoll_pwait */
++		CALL(sys_epoll_pwait)
+ 		CALL(sys_kexec_load)
+ 		CALL(sys_utimensat)
+ 		CALL(sys_signalfd)
+--- a/arch/arm/kernel/entry-common.S
++++ b/arch/arm/kernel/entry-common.S
+@@ -370,16 +370,6 @@ sys_clone_wrapper:
+ 		b	sys_clone
+ ENDPROC(sys_clone_wrapper)
+ 
+-sys_sigsuspend_wrapper:
+-		add	r3, sp, #S_OFF
+-		b	sys_sigsuspend
+-ENDPROC(sys_sigsuspend_wrapper)
+-
+-sys_rt_sigsuspend_wrapper:
+-		add	r2, sp, #S_OFF
+-		b	sys_rt_sigsuspend
+-ENDPROC(sys_rt_sigsuspend_wrapper)
+-
+ sys_sigreturn_wrapper:
+ 		add	r0, sp, #S_OFF
+ 		b	sys_sigreturn
+--- a/arch/arm/kernel/signal.c
++++ b/arch/arm/kernel/signal.c
+@@ -47,57 +47,22 @@ const unsigned long sigreturn_codes[7] =
+ 	MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN,
+ };
+ 
+-static int do_signal(sigset_t *oldset, struct pt_regs * regs, int syscall);
+-
+ /*
+  * atomically swap in the new signal mask, and wait for a signal.
+  */
+-asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask, struct pt_regs *regs)
++asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask)
+ {
+-	sigset_t saveset;
+-
+ 	mask &= _BLOCKABLE;
+ 	spin_lock_irq(&current->sighand->siglock);
+-	saveset = current->blocked;
++	current->saved_sigmask = current->blocked;
+ 	siginitset(&current->blocked, mask);
+ 	recalc_sigpending();
+ 	spin_unlock_irq(&current->sighand->siglock);
+-	regs->ARM_r0 = -EINTR;
+-
+-	while (1) {
+-		current->state = TASK_INTERRUPTIBLE;
+-		schedule();
+-		if (do_signal(&saveset, regs, 0))
+-			return regs->ARM_r0;
+-	}
+-}
+-
+-asmlinkage int
+-sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, struct pt_regs *regs)
+-{
+-	sigset_t saveset, newset;
+-
+-	/* XXX: Don't preclude handling different sized sigset_t's. */
+-	if (sigsetsize != sizeof(sigset_t))
+-		return -EINVAL;
+-
+-	if (copy_from_user(&newset, unewset, sizeof(newset)))
+-		return -EFAULT;
+-	sigdelsetmask(&newset, ~_BLOCKABLE);
+-
+-	spin_lock_irq(&current->sighand->siglock);
+-	saveset = current->blocked;
+-	current->blocked = newset;
+-	recalc_sigpending();
+-	spin_unlock_irq(&current->sighand->siglock);
+-	regs->ARM_r0 = -EINTR;
+ 
+-	while (1) {
+-		current->state = TASK_INTERRUPTIBLE;
+-		schedule();
+-		if (do_signal(&saveset, regs, 0))
+-			return regs->ARM_r0;
+-	}
++	current->state = TASK_INTERRUPTIBLE;
++	schedule();
++	set_restore_sigmask();
++	return -ERESTARTNOHAND;
+ }
+ 
+ asmlinkage int 
+@@ -541,7 +506,7 @@ static inline void restart_syscall(struc
+ /*
+  * OK, we're invoking a handler
+  */	
+-static void
++static int
+ handle_signal(unsigned long sig, struct k_sigaction *ka,
+ 	      siginfo_t *info, sigset_t *oldset,
+ 	      struct pt_regs * regs, int syscall)
+@@ -592,7 +557,7 @@ handle_signal(unsigned long sig, struct 
+ 
+ 	if (ret != 0) {
+ 		force_sigsegv(sig, tsk);
+-		return;
++		return ret;
+ 	}
+ 
+ 	/*
+@@ -606,6 +571,7 @@ handle_signal(unsigned long sig, struct 
+ 	recalc_sigpending();
+ 	spin_unlock_irq(&tsk->sighand->siglock);
+ 
++	return 0;
+ }
+ 
+ /*
+@@ -617,11 +583,12 @@ handle_signal(unsigned long sig, struct 
+  * the kernel can handle, and then we build all the user-level signal handling
+  * stack-frames in one go after that.
+  */
+-static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
++static void do_signal(struct pt_regs *regs, int syscall)
+ {
+ 	struct k_sigaction ka;
+ 	siginfo_t info;
+ 	int signr;
++	sigset_t *oldset;
+ 
+ 	/*
+ 	 * We want the common case to go fast, which
+@@ -630,18 +597,32 @@ static int do_signal(sigset_t *oldset, s
+ 	 * if so.
+ 	 */
+ 	if (!user_mode(regs))
+-		return 0;
++		return;
+ 
+ 	if (try_to_freeze())
+ 		goto no_signal;
+ 
+ 	single_step_clear(current);
+ 
++	if (test_thread_flag(TIF_RESTORE_SIGMASK))
++		oldset = &current->saved_sigmask;
++	else
++		oldset = &current->blocked;
++
+ 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+ 	if (signr > 0) {
+-		handle_signal(signr, &ka, &info, oldset, regs, syscall);
++		if (handle_signal(signr, &ka, &info, oldset, regs, syscall) == 0) {
++			/*
++			 * A signal was successfully delivered; the saved
++			 * sigmask will have been stored in the signal frame,
++			 * and will be restored by sigreturn, so we can simply
++			 * clear the TIF_RESTORE_SIGMASK flag.
++			 */
++			if (test_thread_flag(TIF_RESTORE_SIGMASK))
++				clear_thread_flag(TIF_RESTORE_SIGMASK);
++		}
+ 		single_step_set(current);
+-		return 1;
++		return;
+ 	}
+ 
+  no_signal:
+@@ -693,14 +674,21 @@ static int do_signal(sigset_t *oldset, s
+ 		    regs->ARM_r0 == -ERESTARTNOINTR) {
+ 			restart_syscall(regs);
+ 		}
++
++		/* If there's no signal to deliver, we just put the saved sigmask
++		 * back.
++		 */
++		if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
++			clear_thread_flag(TIF_RESTORE_SIGMASK);
++			sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
++		}
+ 	}
+ 	single_step_set(current);
+-	return 0;
+ }
+ 
+ asmlinkage void
+ do_notify_resume(struct pt_regs *regs, unsigned int thread_flags, int syscall)
+ {
+ 	if (thread_flags & _TIF_SIGPENDING)
+-		do_signal(&current->blocked, regs, syscall);
++		do_signal(regs, syscall);
+ }
diff --git a/target/linux/generic/patches-2.6.30/970-ocf_kbuild_integration.patch b/target/linux/generic/patches-2.6.30/970-ocf_kbuild_integration.patch
new file mode 100644
index 0000000000..02fd8855bb
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/970-ocf_kbuild_integration.patch
@@ -0,0 +1,20 @@
+--- a/crypto/Kconfig
++++ b/crypto/Kconfig
+@@ -781,3 +781,6 @@ config CRYPTO_ANSI_CPRNG
+ source "drivers/crypto/Kconfig"
+ 
+ endif	# if CRYPTO
++
++source "crypto/ocf/Kconfig"
++
+--- a/crypto/Makefile
++++ b/crypto/Makefile
+@@ -84,6 +84,8 @@ obj-$(CONFIG_CRYPTO_RNG2) += krng.o
+ obj-$(CONFIG_CRYPTO_ANSI_CPRNG) += ansi_cprng.o
+ obj-$(CONFIG_CRYPTO_TEST) += tcrypt.o
+ 
++obj-$(CONFIG_OCF_OCF) += ocf/
++
+ #
+ # generic algorithms and the async_tx api
+ #
diff --git a/target/linux/generic/patches-2.6.30/971-ocf_20100325.patch b/target/linux/generic/patches-2.6.30/971-ocf_20100325.patch
new file mode 100644
index 0000000000..ff23af8a0b
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/971-ocf_20100325.patch
@@ -0,0 +1,168 @@
+Index: linux-2.6.30.10/drivers/char/random.c
+===================================================================
+--- linux-2.6.30.10.orig/drivers/char/random.c	2009-12-04 07:00:07.000000000 +0100
++++ linux-2.6.30.10/drivers/char/random.c	2010-05-15 15:44:19.000000000 +0200
+@@ -129,6 +129,9 @@
+  *                                unsigned int value);
+  * 	void add_interrupt_randomness(int irq);
+  *
++ *      void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
++ *      int random_input_wait(void);
++ *
+  * add_input_randomness() uses the input layer interrupt timing, as well as
+  * the event type information from the hardware.
+  *
+@@ -140,6 +143,13 @@
+  * a better measure, since the timing of the disk interrupts are more
+  * unpredictable.
+  *
++ * random_input_words() just provides a raw block of entropy to the input
++ * pool, such as from a hardware entropy generator.
++ *
++ * random_input_wait() suspends the caller until such time as the
++ * entropy pool falls below the write threshold, and returns a count of how
++ * much entropy (in bits) is needed to sustain the pool.
++ *
+  * All of these routines try to estimate how many bits of randomness a
+  * particular randomness source.  They do this by keeping track of the
+  * first and second order deltas of the event timings.
+@@ -712,6 +722,61 @@
+ }
+ #endif
+ 
++/*
++ * random_input_words - add bulk entropy to pool
++ *
++ * @buf: buffer to add
++ * @wordcount: number of __u32 words to add
++ * @ent_count: total amount of entropy (in bits) to credit
++ *
++ * this provides bulk input of entropy to the input pool
++ *
++ */
++void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
++{
++	mix_pool_bytes(&input_pool, buf, wordcount*4);
++
++	credit_entropy_bits(&input_pool, ent_count);
++
++	DEBUG_ENT("crediting %d bits => %d\n",
++		  ent_count, input_pool.entropy_count);
++	/*
++	 * Wake up waiting processes if we have enough
++	 * entropy.
++	 */
++	if (input_pool.entropy_count >= random_read_wakeup_thresh)
++		wake_up_interruptible(&random_read_wait);
++}
++EXPORT_SYMBOL(random_input_words);
++
++/*
++ * random_input_wait - wait until random needs entropy
++ *
++ * this function sleeps until the /dev/random subsystem actually
++ * needs more entropy, and then return the amount of entropy
++ * that it would be nice to have added to the system.
++ */
++int random_input_wait(void)
++{
++	int count;
++
++	wait_event_interruptible(random_write_wait, 
++			 input_pool.entropy_count < random_write_wakeup_thresh);
++
++	count = random_write_wakeup_thresh - input_pool.entropy_count;
++
++        /* likely we got woken up due to a signal */
++	if (count <= 0) count = random_read_wakeup_thresh; 
++
++	DEBUG_ENT("requesting %d bits from input_wait()er %d<%d\n",
++		  count,
++		  input_pool.entropy_count, random_write_wakeup_thresh);
++
++	return count;
++}
++EXPORT_SYMBOL(random_input_wait);
++
++
+ #define EXTRACT_SIZE 10
+ 
+ /*********************************************************************
+Index: linux-2.6.30.10/fs/fcntl.c
+===================================================================
+--- linux-2.6.30.10.orig/fs/fcntl.c	2009-12-04 07:00:07.000000000 +0100
++++ linux-2.6.30.10/fs/fcntl.c	2010-05-15 15:44:19.000000000 +0200
+@@ -142,6 +142,7 @@
+ 	}
+ 	return ret;
+ }
++EXPORT_SYMBOL(sys_dup);
+ 
+ #define SETFL_MASK (O_APPEND | O_NONBLOCK | O_NDELAY | O_DIRECT | O_NOATIME)
+ 
+Index: linux-2.6.30.10/include/linux/miscdevice.h
+===================================================================
+--- linux-2.6.30.10.orig/include/linux/miscdevice.h	2009-12-04 07:00:07.000000000 +0100
++++ linux-2.6.30.10/include/linux/miscdevice.h	2010-05-15 15:44:19.000000000 +0200
+@@ -12,6 +12,7 @@
+ #define APOLLO_MOUSE_MINOR	7
+ #define PC110PAD_MINOR		9
+ /*#define ADB_MOUSE_MINOR	10	FIXME OBSOLETE */
++#define CRYPTODEV_MINOR		70	/* /dev/crypto */
+ #define WATCHDOG_MINOR		130	/* Watchdog timer     */
+ #define TEMP_MINOR		131	/* Temperature Sensor */
+ #define RTC_MINOR		135
+Index: linux-2.6.30.10/include/linux/random.h
+===================================================================
+--- linux-2.6.30.10.orig/include/linux/random.h	2009-12-04 07:00:07.000000000 +0100
++++ linux-2.6.30.10/include/linux/random.h	2010-05-15 15:44:19.000000000 +0200
+@@ -9,6 +9,7 @@
+ 
+ #include <linux/types.h>
+ #include <linux/ioctl.h>
++#include <linux/types.h> /* for __u32 in user space */
+ #include <linux/irqnr.h>
+ 
+ /* ioctl()'s for the random number generator */
+@@ -34,6 +35,30 @@
+ /* Clear the entropy pool and associated counters.  (Superuser only.) */
+ #define RNDCLEARPOOL	_IO( 'R', 0x06 )
+ 
++#ifdef CONFIG_FIPS_RNG
++
++/* Size of seed value - equal to AES blocksize */
++#define AES_BLOCK_SIZE_BYTES	16
++#define SEED_SIZE_BYTES			AES_BLOCK_SIZE_BYTES
++/* Size of AES key */
++#define KEY_SIZE_BYTES		16
++
++/* ioctl() structure used by FIPS 140-2 Tests */
++struct rand_fips_test {
++	unsigned char key[KEY_SIZE_BYTES];			/* Input */
++	unsigned char datetime[SEED_SIZE_BYTES];	/* Input */
++	unsigned char seed[SEED_SIZE_BYTES];		/* Input */
++	unsigned char result[SEED_SIZE_BYTES];		/* Output */
++};
++
++/* FIPS 140-2 RNG Variable Seed Test. (Superuser only.) */
++#define RNDFIPSVST	_IOWR('R', 0x10, struct rand_fips_test)
++
++/* FIPS 140-2 RNG Monte Carlo Test. (Superuser only.) */
++#define RNDFIPSMCT	_IOWR('R', 0x11, struct rand_fips_test)
++
++#endif /* #ifdef CONFIG_FIPS_RNG */
++
+ struct rand_pool_info {
+ 	int	entropy_count;
+ 	int	buf_size;
+@@ -50,6 +75,10 @@
+ 				 unsigned int value);
+ extern void add_interrupt_randomness(int irq);
+ 
++extern void random_input_words(__u32 *buf, size_t wordcount, int ent_count);
++extern int random_input_wait(void);
++#define HAS_RANDOM_INPUT_WAIT 1
++
+ extern void get_random_bytes(void *buf, int nbytes);
+ void generate_random_uuid(unsigned char uuid_out[16]);
+ 
diff --git a/target/linux/generic/patches-2.6.30/974-ssb_b43_default_on.patch b/target/linux/generic/patches-2.6.30/974-ssb_b43_default_on.patch
new file mode 100644
index 0000000000..3176dcb4d8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/974-ssb_b43_default_on.patch
@@ -0,0 +1,19 @@
+--- a/drivers/ssb/Kconfig
++++ b/drivers/ssb/Kconfig
+@@ -29,6 +29,7 @@ config SSB_SPROM
+ config SSB_BLOCKIO
+ 	bool
+ 	depends on SSB
++	default y
+ 
+ config SSB_PCIHOST_POSSIBLE
+ 	bool
+@@ -49,7 +50,7 @@ config SSB_PCIHOST
+ config SSB_B43_PCI_BRIDGE
+ 	bool
+ 	depends on SSB_PCIHOST
+-	default n
++	default y
+ 
+ config SSB_PCMCIAHOST_POSSIBLE
+ 	bool
diff --git a/target/linux/generic/patches-2.6.30/975-hifn795x-byteswap.patch b/target/linux/generic/patches-2.6.30/975-hifn795x-byteswap.patch
new file mode 100644
index 0000000000..3a37c951ec
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/975-hifn795x-byteswap.patch
@@ -0,0 +1,17 @@
+--- a/drivers/crypto/hifn_795x.c
++++ b/drivers/crypto/hifn_795x.c
+@@ -682,12 +682,12 @@ static inline u32 hifn_read_1(struct hif
+ 
+ static inline void hifn_write_0(struct hifn_device *dev, u32 reg, u32 val)
+ {
+-	writel((__force u32)cpu_to_le32(val), dev->bar[0] + reg);
++	writel(val, dev->bar[0] + reg);
+ }
+ 
+ static inline void hifn_write_1(struct hifn_device *dev, u32 reg, u32 val)
+ {
+-	writel((__force u32)cpu_to_le32(val), dev->bar[1] + reg);
++	writel(val, dev->bar[1] + reg);
+ }
+ 
+ static void hifn_wait_puc(struct hifn_device *dev)
diff --git a/target/linux/generic/patches-2.6.30/977-textsearch_kconfig_hacks.patch b/target/linux/generic/patches-2.6.30/977-textsearch_kconfig_hacks.patch
new file mode 100644
index 0000000000..655ebae645
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/977-textsearch_kconfig_hacks.patch
@@ -0,0 +1,23 @@
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -145,16 +145,16 @@ config REED_SOLOMON_DEC16
+ # Textsearch support is select'ed if needed
+ #
+ config TEXTSEARCH
+-	boolean
++	boolean	"Textsearch support"
+ 
+ config TEXTSEARCH_KMP
+-	tristate
++	tristate "Textsearch KMP"
+ 
+ config TEXTSEARCH_BM
+-	tristate
++	tristate "Textsearch BM"
+ 
+ config TEXTSEARCH_FSM
+-	tristate
++	tristate "Textsearch FSM"
+ 
+ config HAS_IOMEM
+ 	boolean
diff --git a/target/linux/generic/patches-2.6.30/978-lib80211_kconfig_hacks.patch b/target/linux/generic/patches-2.6.30/978-lib80211_kconfig_hacks.patch
new file mode 100644
index 0000000000..53813a45f6
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/978-lib80211_kconfig_hacks.patch
@@ -0,0 +1,19 @@
+--- a/net/wireless/Kconfig
++++ b/net/wireless/Kconfig
+@@ -63,13 +63,13 @@ config LIB80211
+ 	  you want this built into your kernel.
+ 
+ config LIB80211_CRYPT_WEP
+-	tristate
++	tristate "LIB80211_CRYPT_WEP"
+ 
+ config LIB80211_CRYPT_CCMP
+-	tristate
++	tristate "LIB80211_CRYPT_CCMP"
+ 
+ config LIB80211_CRYPT_TKIP
+-	tristate
++	tristate "LIB80211_CRYPT_TKIP"
+ 
+ config LIB80211_DEBUG
+ 	bool "lib80211 debugging messages"
diff --git a/target/linux/generic/patches-2.6.30/979-crypto_add_kconfig_prompts.patch b/target/linux/generic/patches-2.6.30/979-crypto_add_kconfig_prompts.patch
new file mode 100644
index 0000000000..03ad2a8590
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/979-crypto_add_kconfig_prompts.patch
@@ -0,0 +1,47 @@
+--- a/crypto/Kconfig
++++ b/crypto/Kconfig
+@@ -30,7 +30,7 @@ config CRYPTO_FIPS
+ 	  this is.
+ 
+ config CRYPTO_ALGAPI
+-	tristate
++	tristate "ALGAPI"
+ 	select CRYPTO_ALGAPI2
+ 	help
+ 	  This option provides the API for cryptographic algorithms.
+@@ -39,7 +39,7 @@ config CRYPTO_ALGAPI2
+ 	tristate
+ 
+ config CRYPTO_AEAD
+-	tristate
++	tristate "AEAD"
+ 	select CRYPTO_AEAD2
+ 	select CRYPTO_ALGAPI
+ 
+@@ -48,7 +48,7 @@ config CRYPTO_AEAD2
+ 	select CRYPTO_ALGAPI2
+ 
+ config CRYPTO_BLKCIPHER
+-	tristate
++	tristate "BLKCIPHER"
+ 	select CRYPTO_BLKCIPHER2
+ 	select CRYPTO_ALGAPI
+ 
+@@ -59,7 +59,7 @@ config CRYPTO_BLKCIPHER2
+ 	select CRYPTO_WORKQUEUE
+ 
+ config CRYPTO_HASH
+-	tristate
++	tristate "HASH"
+ 	select CRYPTO_HASH2
+ 	select CRYPTO_ALGAPI
+ 
+@@ -68,7 +68,7 @@ config CRYPTO_HASH2
+ 	select CRYPTO_ALGAPI2
+ 
+ config CRYPTO_RNG
+-	tristate
++	tristate "RNG"
+ 	select CRYPTO_RNG2
+ 	select CRYPTO_ALGAPI
+ 
diff --git a/target/linux/generic/patches-2.6.30/980-vm_exports.patch b/target/linux/generic/patches-2.6.30/980-vm_exports.patch
new file mode 100644
index 0000000000..eaf89da3f5
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/980-vm_exports.patch
@@ -0,0 +1,136 @@
+--- a/mm/shmem.c
++++ b/mm/shmem.c
+@@ -2606,6 +2606,16 @@ int shmem_unuse(swp_entry_t entry, struc
+ 
+ /* common code */
+ 
++void shmem_set_file(struct vm_area_struct *vma, struct file *file)
++{
++	ima_shm_check(file);
++	if (vma->vm_file)
++		fput(vma->vm_file);
++	vma->vm_file = file;
++	vma->vm_ops = &shmem_vm_ops;
++}
++EXPORT_SYMBOL_GPL(shmem_set_file);
++
+ /**
+  * shmem_file_setup - get an unlinked file living in tmpfs
+  * @name: name for dentry (to be seen in /proc/<pid>/maps
+@@ -2684,11 +2694,7 @@ int shmem_zero_setup(struct vm_area_stru
+ 	if (IS_ERR(file))
+ 		return PTR_ERR(file);
+ 
+-	ima_shm_check(file);
+-	if (vma->vm_file)
+-		fput(vma->vm_file);
+-	vma->vm_file = file;
+-	vma->vm_ops = &shmem_vm_ops;
++	shmem_set_file(vma, file);
+ 	return 0;
+ }
+ 
+--- a/fs/file.c
++++ b/fs/file.c
+@@ -270,6 +270,7 @@ int expand_files(struct files_struct *fi
+ 	/* All good, so we try */
+ 	return expand_fdtable(files, nr);
+ }
++EXPORT_SYMBOL_GPL(expand_files);
+ 
+ static int count_open_files(struct fdtable *fdt)
+ {
+--- a/kernel/exit.c
++++ b/kernel/exit.c
+@@ -508,6 +508,7 @@ struct files_struct *get_files_struct(st
+ 
+ 	return files;
+ }
++EXPORT_SYMBOL_GPL(get_files_struct);
+ 
+ void put_files_struct(struct files_struct *files)
+ {
+@@ -527,6 +528,7 @@ void put_files_struct(struct files_struc
+ 		free_fdtable(fdt);
+ 	}
+ }
++EXPORT_SYMBOL_GPL(put_files_struct);
+ 
+ void reset_files_struct(struct files_struct *files)
+ {
+--- a/kernel/fork.c
++++ b/kernel/fork.c
+@@ -160,6 +160,7 @@ void __put_task_struct(struct task_struc
+ 	if (!profile_handoff_task(tsk))
+ 		free_task(tsk);
+ }
++EXPORT_SYMBOL_GPL(__put_task_struct);
+ 
+ /*
+  * macro override instead of weak attribute alias, to workaround
+--- a/kernel/sched.c
++++ b/kernel/sched.c
+@@ -5666,6 +5666,7 @@ int can_nice(const struct task_struct *p
+ 	return (nice_rlim <= p->signal->rlim[RLIMIT_NICE].rlim_cur ||
+ 		capable(CAP_SYS_NICE));
+ }
++EXPORT_SYMBOL_GPL(can_nice);
+ 
+ #ifdef __ARCH_WANT_SYS_NICE
+ 
+--- a/mm/memory.c
++++ b/mm/memory.c
+@@ -1063,6 +1063,7 @@ unsigned long zap_page_range(struct vm_a
+ 		tlb_finish_mmu(tlb, address, end);
+ 	return end;
+ }
++EXPORT_SYMBOL_GPL(zap_page_range);
+ 
+ /**
+  * zap_vma_ptes - remove ptes mapping the vma
+@@ -2438,6 +2439,7 @@ int vmtruncate_range(struct inode *inode
+ 
+ 	return 0;
+ }
++EXPORT_SYMBOL_GPL(vmtruncate_range);
+ 
+ /*
+  * We enter with non-exclusive mmap_sem (to exclude vma changes,
+--- a/mm/vmalloc.c
++++ b/mm/vmalloc.c
+@@ -1101,6 +1101,7 @@ void unmap_kernel_range(unsigned long ad
+ 	vunmap_page_range(addr, end);
+ 	flush_tlb_kernel_range(addr, end);
+ }
++EXPORT_SYMBOL_GPL(unmap_kernel_range);
+ 
+ int map_vm_area(struct vm_struct *area, pgprot_t prot, struct page ***pages)
+ {
+@@ -1214,6 +1215,7 @@ struct vm_struct *get_vm_area(unsigned l
+ 	return __get_vm_area_node(size, flags, VMALLOC_START, VMALLOC_END,
+ 				-1, GFP_KERNEL, __builtin_return_address(0));
+ }
++EXPORT_SYMBOL_GPL(get_vm_area);
+ 
+ struct vm_struct *get_vm_area_caller(unsigned long size, unsigned long flags,
+ 				void *caller)
+--- a/include/linux/mm.h
++++ b/include/linux/mm.h
+@@ -726,6 +726,7 @@ static inline int shmem_lock(struct file
+ #endif
+ struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags);
+ 
++void shmem_set_file(struct vm_area_struct *vma, struct file *file);
+ int shmem_zero_setup(struct vm_area_struct *);
+ 
+ #ifndef CONFIG_MMU
+--- a/kernel/signal.c
++++ b/kernel/signal.c
+@@ -1053,6 +1053,7 @@ struct sighand_struct *lock_task_sighand
+ 
+ 	return sighand;
+ }
++EXPORT_SYMBOL(lock_task_sighand);
+ 
+ /*
+  * send signal info to all the members of a group
diff --git a/target/linux/generic/patches-2.6.30/985-cris-headers.patch b/target/linux/generic/patches-2.6.30/985-cris-headers.patch
new file mode 100644
index 0000000000..73ede933ba
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/985-cris-headers.patch
@@ -0,0 +1,27 @@
+--- a/arch/cris/include/arch-v10/arch/Kbuild
++++ b/arch/cris/include/arch-v10/arch/Kbuild
+@@ -1,3 +1,5 @@
++header-y += elf.h
++header-y += ptrace.h
+ header-y += user.h
+ header-y += svinto.h
+ header-y += sv_addr_ag.h
+--- a/arch/cris/include/asm/Kbuild
++++ b/arch/cris/include/asm/Kbuild
+@@ -1,11 +1,14 @@
+ include include/asm-generic/Kbuild.asm
+ 
+-header-y += arch-v10/
+-header-y += arch-v32/
++header-y += ../arch-v10/arch/
++header-y += ../arch-v32/arch/
+ 
++header-y += elf.h
+ header-y += ethernet.h
++header-y += page.h
+ header-y += rtc.h
+ header-y += sync_serial.h
++header-y += user.h
+ 
+ unifdef-y += etraxgpio.h
+ unifdef-y += rs485.h
diff --git a/target/linux/generic/patches-2.6.30/990-fix_feroceon_vfp_handling.patch b/target/linux/generic/patches-2.6.30/990-fix_feroceon_vfp_handling.patch
new file mode 100644
index 0000000000..0ee18f02b1
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/990-fix_feroceon_vfp_handling.patch
@@ -0,0 +1,70 @@
+From: Catalin Marinas <catalin.marinas@arm.com>
+Date: Sat, 30 May 2009 13:00:18 +0000 (+0100)
+Subject: Fix the VFP handling on the Feroceon CPU
+X-Git-Url: http://www.linux-arm.org/git?p=linux-2.6.git;a=commitdiff_plain;h=85d6943af50537d3aec58b967ffbd3fec88453e9;hp=26584853a44c58f3d6ac7360d697a2ddcd1a3efa
+
+Fix the VFP handling on the Feroceon CPU
+
+This CPU generates synchronous VFP exceptions in a non-standard way -
+the FPEXC.EX bit set but without the FPSCR.IXE bit being set like in the
+VFP subarchitecture 1 or just the FPEXC.DEX bit like in VFP
+subarchitecture 2. The main problem is that the faulty instruction
+(which needs to be emulated in software) will be restarted several times
+(normally until a context switch disables the VFP). This patch ensures
+that the VFP exception is treated as synchronous.
+
+Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
+Cc: Nicolas Pitre <nico@cam.org>
+---
+
+--- a/arch/arm/vfp/vfphw.S
++++ b/arch/arm/vfp/vfphw.S
+@@ -100,6 +100,7 @@ ENTRY(vfp_support_entry)
+ 	beq	no_old_VFP_process
+ 	VFPFSTMIA r4, r5		@ save the working registers
+ 	VFPFMRX	r5, FPSCR		@ current status
++#ifndef CONFIG_CPU_FEROCEON
+ 	tst	r1, #FPEXC_EX		@ is there additional state to save?
+ 	beq	1f
+ 	VFPFMRX	r6, FPINST		@ FPINST (only if FPEXC.EX is set)
+@@ -107,6 +108,7 @@ ENTRY(vfp_support_entry)
+ 	beq	1f
+ 	VFPFMRX	r8, FPINST2		@ FPINST2 if needed (and present)
+ 1:
++#endif
+ 	stmia	r4, {r1, r5, r6, r8}	@ save FPEXC, FPSCR, FPINST, FPINST2
+ 					@ and point r4 at the word at the
+ 					@ start of the register dump
+@@ -119,6 +121,7 @@ no_old_VFP_process:
+ 	VFPFLDMIA r10, r5		@ reload the working registers while
+ 					@ FPEXC is in a safe state
+ 	ldmia	r10, {r1, r5, r6, r8}	@ load FPEXC, FPSCR, FPINST, FPINST2
++#ifndef CONFIG_CPU_FEROCEON
+ 	tst	r1, #FPEXC_EX		@ is there additional state to restore?
+ 	beq	1f
+ 	VFPFMXR	FPINST, r6		@ restore FPINST (only if FPEXC.EX is set)
+@@ -126,6 +129,7 @@ no_old_VFP_process:
+ 	beq	1f
+ 	VFPFMXR	FPINST2, r8		@ FPINST2 if needed (and present)
+ 1:
++#endif
+ 	VFPFMXR	FPSCR, r5		@ restore status
+ 
+ check_for_exception:
+--- a/arch/arm/vfp/vfpmodule.c
++++ b/arch/arm/vfp/vfpmodule.c
+@@ -253,12 +253,14 @@ void VFP_bounce(u32 trigger, u32 fpexc, 
+ 	}
+ 
+ 	if (fpexc & FPEXC_EX) {
++#ifndef CONFIG_CPU_FEROCEON
+ 		/*
+ 		 * Asynchronous exception. The instruction is read from FPINST
+ 		 * and the interrupted instruction has to be restarted.
+ 		 */
+ 		trigger = fmrx(FPINST);
+ 		regs->ARM_pc -= 4;
++#endif
+ 	} else if (!(fpexc & FPEXC_DEX)) {
+ 		/*
+ 		 * Illegal combination of bits. It can be caused by an
diff --git a/target/linux/generic/patches-2.6.30/991-ppc4xx_optimization.patch b/target/linux/generic/patches-2.6.30/991-ppc4xx_optimization.patch
new file mode 100644
index 0000000000..39d5fb0d00
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/991-ppc4xx_optimization.patch
@@ -0,0 +1,30 @@
+Upstream doesn't optimize the kernel and bootwrappers for ppc44x because
+they still want to support gcc 3.3 -- well, we don't.
+
+--- a/arch/powerpc/Makefile
++++ b/arch/powerpc/Makefile
+@@ -123,7 +123,8 @@ ifeq ($(CONFIG_FUNCTION_TRACER),y)
+ KBUILD_CFLAGS		+= -mno-sched-epilog
+ endif
+ 
+-cpu-as-$(CONFIG_4xx)		+= -Wa,-m405
++cpu-as-$(CONFIG_40x)		+= -Wa,-m405
++cpu-as-$(CONFIG_44x)		+= -Wa,-m440
+ cpu-as-$(CONFIG_6xx)		+= -Wa,-maltivec
+ cpu-as-$(CONFIG_POWER4)		+= -Wa,-maltivec
+ cpu-as-$(CONFIG_E500)		+= -Wa,-me500
+--- a/arch/powerpc/boot/Makefile
++++ b/arch/powerpc/boot/Makefile
+@@ -38,9 +38,9 @@ BOOTCFLAGS	+= -I$(obj) -I$(srctree)/$(ob
+ DTS_FLAGS	?= -p 1024
+ 
+ $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
+-$(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
+-$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
+-$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
++$(obj)/ebony.o: BOOTCFLAGS += -mcpu=440
++$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=440
++$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440
+ $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
+ $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
+ $(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
diff --git a/target/linux/generic/patches-2.6.30/998-openwrt_lzma_options.patch b/target/linux/generic/patches-2.6.30/998-openwrt_lzma_options.patch
new file mode 100644
index 0000000000..b9c9b78683
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/998-openwrt_lzma_options.patch
@@ -0,0 +1,51 @@
+--- a/scripts/Makefile.lib
++++ b/scripts/Makefile.lib
+@@ -204,4 +204,4 @@ cmd_bzip2 = (bzip2 -9 < $< && $(size_app
+ # ---------------------------------------------------------------------------
+ 
+ quiet_cmd_lzma = LZMA    $@
+-cmd_lzma = (lzma -9 -c $< && $(size_append) $<) >$@ || (rm -f $@ ; false)
++cmd_lzma = lzma e $< $@ -lc1 -lp2 -pb2 -eos
+--- a/scripts/gen_initramfs_list.sh
++++ b/scripts/gen_initramfs_list.sh
+@@ -225,7 +225,7 @@ cpio_list=
+ output="/dev/stdout"
+ output_file=""
+ is_cpio_compressed=
+-compr="gzip -9 -f"
++compr="gzip -9 -f -"
+ 
+ arg="$1"
+ case "$arg" in
+@@ -239,9 +239,9 @@ case "$arg" in
+ 		output_file="$1"
+ 		cpio_list="$(mktemp ${TMPDIR:-/tmp}/cpiolist.XXXXXX)"
+ 		output=${cpio_list}
+-		echo "$output_file" | grep -q "\.gz$" && compr="gzip -9 -f"
+-		echo "$output_file" | grep -q "\.bz2$" && compr="bzip2 -9 -f"
+-		echo "$output_file" | grep -q "\.lzma$" && compr="lzma -9 -f"
++		echo "$output_file" | grep -q "\.gz$" && compr="gzip -9 -f -"
++		echo "$output_file" | grep -q "\.bz2$" && compr="bzip2 -9 -f -"
++		echo "$output_file" | grep -q "\.lzma$" && compr="lzma e -d20 -lc1 -lp2 -pb2 -si -so"
+ 		echo "$output_file" | grep -q "\.cpio$" && compr="cat"
+ 		shift
+ 		;;
+@@ -292,7 +292,7 @@ if [ ! -z ${output_file} ]; then
+ 	if [ "${is_cpio_compressed}" = "compressed" ]; then
+ 		cat ${cpio_tfile} > ${output_file}
+ 	else
+-		(cat ${cpio_tfile} | ${compr}  - > ${output_file}) \
++		(cat ${cpio_tfile} | ${compr} > ${output_file}) \
+ 		|| (rm -f ${output_file} ; false)
+ 	fi
+ 	[ -z ${cpio_file} ] && rm ${cpio_tfile}
+--- a/lib/decompress.c
++++ b/lib/decompress.c
+@@ -32,6 +32,7 @@ static const struct compress_format {
+ 	{ {037, 0236}, "gzip", gunzip },
+ 	{ {0x42, 0x5a}, "bzip2", bunzip2 },
+ 	{ {0x5d, 0x00}, "lzma", unlzma },
++	{ {0x6d, 0x00}, "lzma-openwrt", unlzma },
+ 	{ {0, 0}, NULL, NULL }
+ };
+ 
diff --git a/target/linux/generic/patches-2.6.30/999-use_preinit_as_init.patch b/target/linux/generic/patches-2.6.30/999-use_preinit_as_init.patch
new file mode 100644
index 0000000000..0a52a87e83
--- /dev/null
+++ b/target/linux/generic/patches-2.6.30/999-use_preinit_as_init.patch
@@ -0,0 +1,14 @@
+--- a/init/main.c
++++ b/init/main.c
+@@ -836,10 +836,7 @@ static noinline int init_post(void)
+ 		printk(KERN_WARNING "Failed to execute %s.  Attempting "
+ 					"defaults...\n", execute_command);
+ 	}
+-	run_init_process("/sbin/init");
+-	run_init_process("/etc/init");
+-	run_init_process("/bin/init");
+-	run_init_process("/bin/sh");
++	run_init_process("/etc/preinit");
+ 
+ 	panic("No init found.  Try passing init= option to kernel.");
+ }
diff --git a/target/linux/generic/patches-2.6.31/001-squashfs_move_zlib_decomp.patch b/target/linux/generic/patches-2.6.31/001-squashfs_move_zlib_decomp.patch
new file mode 100644
index 0000000000..94096791f1
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/001-squashfs_move_zlib_decomp.patch
@@ -0,0 +1,244 @@
+From 6c4419d997d4431bb62e73475cd6b084e83efbd1 Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Tue, 22 Sep 2009 19:25:24 +0100
+Subject: [PATCH] Squashfs: move zlib decompression wrapper code into a separate file
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/Makefile       |    2 +-
+ fs/squashfs/block.c        |   74 ++----------------------------
+ fs/squashfs/squashfs.h     |    4 ++
+ fs/squashfs/zlib_wrapper.c |  109 ++++++++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 118 insertions(+), 71 deletions(-)
+ create mode 100644 fs/squashfs/zlib_wrapper.c
+
+--- a/fs/squashfs/Makefile
++++ b/fs/squashfs/Makefile
+@@ -4,4 +4,4 @@
+ 
+ obj-$(CONFIG_SQUASHFS) += squashfs.o
+ squashfs-y += block.o cache.o dir.o export.o file.o fragment.o id.o inode.o
+-squashfs-y += namei.o super.o symlink.o
++squashfs-y += namei.o super.o symlink.o zlib_wrapper.o
+--- a/fs/squashfs/block.c
++++ b/fs/squashfs/block.c
+@@ -29,7 +29,6 @@
+ #include <linux/fs.h>
+ #include <linux/vfs.h>
+ #include <linux/slab.h>
+-#include <linux/mutex.h>
+ #include <linux/string.h>
+ #include <linux/buffer_head.h>
+ #include <linux/zlib.h>
+@@ -153,72 +152,10 @@ int squashfs_read_data(struct super_bloc
+ 	}
+ 
+ 	if (compressed) {
+-		int zlib_err = 0, zlib_init = 0;
+-
+-		/*
+-		 * Uncompress block.
+-		 */
+-
+-		mutex_lock(&msblk->read_data_mutex);
+-
+-		msblk->stream.avail_out = 0;
+-		msblk->stream.avail_in = 0;
+-
+-		bytes = length;
+-		do {
+-			if (msblk->stream.avail_in == 0 && k < b) {
+-				avail = min(bytes, msblk->devblksize - offset);
+-				bytes -= avail;
+-				wait_on_buffer(bh[k]);
+-				if (!buffer_uptodate(bh[k]))
+-					goto release_mutex;
+-
+-				if (avail == 0) {
+-					offset = 0;
+-					put_bh(bh[k++]);
+-					continue;
+-				}
+-
+-				msblk->stream.next_in = bh[k]->b_data + offset;
+-				msblk->stream.avail_in = avail;
+-				offset = 0;
+-			}
+-
+-			if (msblk->stream.avail_out == 0 && page < pages) {
+-				msblk->stream.next_out = buffer[page++];
+-				msblk->stream.avail_out = PAGE_CACHE_SIZE;
+-			}
+-
+-			if (!zlib_init) {
+-				zlib_err = zlib_inflateInit(&msblk->stream);
+-				if (zlib_err != Z_OK) {
+-					ERROR("zlib_inflateInit returned"
+-						" unexpected result 0x%x,"
+-						" srclength %d\n", zlib_err,
+-						srclength);
+-					goto release_mutex;
+-				}
+-				zlib_init = 1;
+-			}
+-
+-			zlib_err = zlib_inflate(&msblk->stream, Z_SYNC_FLUSH);
+-
+-			if (msblk->stream.avail_in == 0 && k < b)
+-				put_bh(bh[k++]);
+-		} while (zlib_err == Z_OK);
+-
+-		if (zlib_err != Z_STREAM_END) {
+-			ERROR("zlib_inflate error, data probably corrupt\n");
+-			goto release_mutex;
+-		}
+-
+-		zlib_err = zlib_inflateEnd(&msblk->stream);
+-		if (zlib_err != Z_OK) {
+-			ERROR("zlib_inflate error, data probably corrupt\n");
+-			goto release_mutex;
+-		}
+-		length = msblk->stream.total_out;
+-		mutex_unlock(&msblk->read_data_mutex);
++		length = zlib_uncompress(msblk, buffer, bh, b, offset, length,
++			srclength, pages);
++		if (length < 0)
++			goto read_failure;
+ 	} else {
+ 		/*
+ 		 * Block is uncompressed.
+@@ -255,9 +192,6 @@ int squashfs_read_data(struct super_bloc
+ 	kfree(bh);
+ 	return length;
+ 
+-release_mutex:
+-	mutex_unlock(&msblk->read_data_mutex);
+-
+ block_release:
+ 	for (; k < b; k++)
+ 		put_bh(bh[k]);
+--- a/fs/squashfs/squashfs.h
++++ b/fs/squashfs/squashfs.h
+@@ -70,6 +70,10 @@ extern struct inode *squashfs_iget(struc
+ 				unsigned int);
+ extern int squashfs_read_inode(struct inode *, long long);
+ 
++/* zlib_wrapper.c */
++extern int zlib_uncompress(struct squashfs_sb_info *, void **,
++				struct buffer_head **, int, int, int, int, int);
++
+ /*
+  * Inodes and files operations
+  */
+--- /dev/null
++++ b/fs/squashfs/zlib_wrapper.c
+@@ -0,0 +1,109 @@
++/*
++ * Squashfs - a compressed read only filesystem for Linux
++ *
++ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
++ * Phillip Lougher <phillip@lougher.demon.co.uk>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2,
++ * or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++ *
++ * zlib_wrapper.c
++ */
++
++
++#include <linux/mutex.h>
++#include <linux/buffer_head.h>
++#include <linux/zlib.h>
++
++#include "squashfs_fs.h"
++#include "squashfs_fs_sb.h"
++#include "squashfs_fs_i.h"
++#include "squashfs.h"
++
++int zlib_uncompress(struct squashfs_sb_info *msblk, void **buffer,
++	struct buffer_head **bh, int b, int offset, int length, int srclength,
++	int pages)
++{
++	int zlib_err = 0, zlib_init = 0;
++	int avail, bytes, k = 0, page = 0;
++
++	mutex_lock(&msblk->read_data_mutex);
++
++	msblk->stream.avail_out = 0;
++	msblk->stream.avail_in = 0;
++
++	bytes = length;
++	do {
++		if (msblk->stream.avail_in == 0 && k < b) {
++			avail = min(bytes, msblk->devblksize - offset);
++			bytes -= avail;
++			wait_on_buffer(bh[k]);
++			if (!buffer_uptodate(bh[k]))
++				goto release_mutex;
++
++			if (avail == 0) {
++				offset = 0;
++				put_bh(bh[k++]);
++				continue;
++			}
++
++			msblk->stream.next_in = bh[k]->b_data + offset;
++			msblk->stream.avail_in = avail;
++			offset = 0;
++		}
++
++		if (msblk->stream.avail_out == 0 && page < pages) {
++			msblk->stream.next_out = buffer[page++];
++			msblk->stream.avail_out = PAGE_CACHE_SIZE;
++		}
++
++		if (!zlib_init) {
++			zlib_err = zlib_inflateInit(&msblk->stream);
++			if (zlib_err != Z_OK) {
++				ERROR("zlib_inflateInit returned unexpected "
++					"result 0x%x, srclength %d\n",
++					zlib_err, srclength);
++				goto release_mutex;
++			}
++			zlib_init = 1;
++		}
++
++		zlib_err = zlib_inflate(&msblk->stream, Z_SYNC_FLUSH);
++
++		if (msblk->stream.avail_in == 0 && k < b)
++			put_bh(bh[k++]);
++	} while (zlib_err == Z_OK);
++
++	if (zlib_err != Z_STREAM_END) {
++		ERROR("zlib_inflate error, data probably corrupt\n");
++		goto release_mutex;
++	}
++
++	zlib_err = zlib_inflateEnd(&msblk->stream);
++	if (zlib_err != Z_OK) {
++		ERROR("zlib_inflate error, data probably corrupt\n");
++		goto release_mutex;
++	}
++
++	mutex_unlock(&msblk->read_data_mutex);
++	return msblk->stream.total_out;
++
++release_mutex:
++	mutex_unlock(&msblk->read_data_mutex);
++
++	for (; k < b; k++)
++		put_bh(bh[k]);
++
++	return -EIO;
++}
diff --git a/target/linux/generic/patches-2.6.31/002-squashfs_factor_out_remaining_zlib.patch b/target/linux/generic/patches-2.6.31/002-squashfs_factor_out_remaining_zlib.patch
new file mode 100644
index 0000000000..eacbb97aef
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/002-squashfs_factor_out_remaining_zlib.patch
@@ -0,0 +1,317 @@
+From 37c44e85fd49676ec15ccaeea065662c1fbcda7d Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Wed, 23 Sep 2009 19:04:49 +0100
+Subject: [PATCH] Squashfs: Factor out remaining zlib dependencies into separate wrapper file
+
+Move zlib buffer init/destroy code into separate wrapper file.  Also
+make zlib z_stream field a void * removing the need to include zlib.h
+for most files.
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/block.c          |    1 -
+ fs/squashfs/cache.c          |    1 -
+ fs/squashfs/dir.c            |    1 -
+ fs/squashfs/export.c         |    1 -
+ fs/squashfs/file.c           |    1 -
+ fs/squashfs/fragment.c       |    1 -
+ fs/squashfs/id.c             |    1 -
+ fs/squashfs/inode.c          |    1 -
+ fs/squashfs/namei.c          |    1 -
+ fs/squashfs/squashfs.h       |    2 +
+ fs/squashfs/squashfs_fs_sb.h |    2 +-
+ fs/squashfs/super.c          |   14 +++------
+ fs/squashfs/symlink.c        |    1 -
+ fs/squashfs/zlib_wrapper.c   |   56 ++++++++++++++++++++++++++++++++---------
+ 14 files changed, 51 insertions(+), 33 deletions(-)
+
+--- a/fs/squashfs/block.c
++++ b/fs/squashfs/block.c
+@@ -31,7 +31,6 @@
+ #include <linux/slab.h>
+ #include <linux/string.h>
+ #include <linux/buffer_head.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/cache.c
++++ b/fs/squashfs/cache.c
+@@ -51,7 +51,6 @@
+ #include <linux/sched.h>
+ #include <linux/spinlock.h>
+ #include <linux/wait.h>
+-#include <linux/zlib.h>
+ #include <linux/pagemap.h>
+ 
+ #include "squashfs_fs.h"
+--- a/fs/squashfs/dir.c
++++ b/fs/squashfs/dir.c
+@@ -30,7 +30,6 @@
+ #include <linux/fs.h>
+ #include <linux/vfs.h>
+ #include <linux/slab.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/export.c
++++ b/fs/squashfs/export.c
+@@ -39,7 +39,6 @@
+ #include <linux/vfs.h>
+ #include <linux/dcache.h>
+ #include <linux/exportfs.h>
+-#include <linux/zlib.h>
+ #include <linux/slab.h>
+ 
+ #include "squashfs_fs.h"
+--- a/fs/squashfs/file.c
++++ b/fs/squashfs/file.c
+@@ -47,7 +47,6 @@
+ #include <linux/string.h>
+ #include <linux/pagemap.h>
+ #include <linux/mutex.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/fragment.c
++++ b/fs/squashfs/fragment.c
+@@ -36,7 +36,6 @@
+ #include <linux/fs.h>
+ #include <linux/vfs.h>
+ #include <linux/slab.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/id.c
++++ b/fs/squashfs/id.c
+@@ -34,7 +34,6 @@
+ #include <linux/fs.h>
+ #include <linux/vfs.h>
+ #include <linux/slab.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/inode.c
++++ b/fs/squashfs/inode.c
+@@ -40,7 +40,6 @@
+ 
+ #include <linux/fs.h>
+ #include <linux/vfs.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/namei.c
++++ b/fs/squashfs/namei.c
+@@ -57,7 +57,6 @@
+ #include <linux/slab.h>
+ #include <linux/string.h>
+ #include <linux/dcache.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/squashfs.h
++++ b/fs/squashfs/squashfs.h
+@@ -71,6 +71,8 @@ extern struct inode *squashfs_iget(struc
+ extern int squashfs_read_inode(struct inode *, long long);
+ 
+ /* zlib_wrapper.c */
++extern void *zlib_init(void);
++extern void zlib_free(void *);
+ extern int zlib_uncompress(struct squashfs_sb_info *, void **,
+ 				struct buffer_head **, int, int, int, int, int);
+ 
+--- a/fs/squashfs/squashfs_fs_sb.h
++++ b/fs/squashfs/squashfs_fs_sb.h
+@@ -64,7 +64,7 @@ struct squashfs_sb_info {
+ 	struct mutex		read_data_mutex;
+ 	struct mutex		meta_index_mutex;
+ 	struct meta_index	*meta_index;
+-	z_stream		stream;
++	void			*stream;
+ 	__le64			*inode_lookup_table;
+ 	u64			inode_table;
+ 	u64			directory_table;
+--- a/fs/squashfs/super.c
++++ b/fs/squashfs/super.c
+@@ -35,7 +35,6 @@
+ #include <linux/pagemap.h>
+ #include <linux/init.h>
+ #include <linux/module.h>
+-#include <linux/zlib.h>
+ #include <linux/magic.h>
+ 
+ #include "squashfs_fs.h"
+@@ -87,12 +86,9 @@ static int squashfs_fill_super(struct su
+ 	}
+ 	msblk = sb->s_fs_info;
+ 
+-	msblk->stream.workspace = kmalloc(zlib_inflate_workspacesize(),
+-		GFP_KERNEL);
+-	if (msblk->stream.workspace == NULL) {
+-		ERROR("Failed to allocate zlib workspace\n");
++	msblk->stream = zlib_init();
++	if (msblk->stream == NULL)
+ 		goto failure;
+-	}
+ 
+ 	sblk = kzalloc(sizeof(*sblk), GFP_KERNEL);
+ 	if (sblk == NULL) {
+@@ -292,17 +288,17 @@ failed_mount:
+ 	squashfs_cache_delete(msblk->block_cache);
+ 	squashfs_cache_delete(msblk->fragment_cache);
+ 	squashfs_cache_delete(msblk->read_page);
++	zlib_free(msblk->stream);
+ 	kfree(msblk->inode_lookup_table);
+ 	kfree(msblk->fragment_index);
+ 	kfree(msblk->id_table);
+-	kfree(msblk->stream.workspace);
+ 	kfree(sb->s_fs_info);
+ 	sb->s_fs_info = NULL;
+ 	kfree(sblk);
+ 	return err;
+ 
+ failure:
+-	kfree(msblk->stream.workspace);
++	zlib_free(msblk->stream);
+ 	kfree(sb->s_fs_info);
+ 	sb->s_fs_info = NULL;
+ 	return -ENOMEM;
+@@ -346,10 +342,10 @@ static void squashfs_put_super(struct su
+ 		squashfs_cache_delete(sbi->block_cache);
+ 		squashfs_cache_delete(sbi->fragment_cache);
+ 		squashfs_cache_delete(sbi->read_page);
++		zlib_free(sbi->stream);
+ 		kfree(sbi->id_table);
+ 		kfree(sbi->fragment_index);
+ 		kfree(sbi->meta_index);
+-		kfree(sbi->stream.workspace);
+ 		kfree(sb->s_fs_info);
+ 		sb->s_fs_info = NULL;
+ 	}
+--- a/fs/squashfs/symlink.c
++++ b/fs/squashfs/symlink.c
+@@ -36,7 +36,6 @@
+ #include <linux/slab.h>
+ #include <linux/string.h>
+ #include <linux/pagemap.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/zlib_wrapper.c
++++ b/fs/squashfs/zlib_wrapper.c
+@@ -31,21 +31,51 @@
+ #include "squashfs_fs_i.h"
+ #include "squashfs.h"
+ 
++void *zlib_init()
++{
++	z_stream *stream = kmalloc(sizeof(z_stream), GFP_KERNEL);
++	if (stream == NULL)
++		goto failed;
++	stream->workspace = kmalloc(zlib_inflate_workspacesize(),
++		GFP_KERNEL);
++	if (stream->workspace == NULL)
++		goto failed;
++
++	return stream;
++
++failed:
++	ERROR("Failed to allocate zlib workspace\n");
++	kfree(stream);
++	return NULL;
++}
++
++
++void zlib_free(void *strm)
++{
++	z_stream *stream = strm;
++
++	if (stream)
++		kfree(stream->workspace);
++	kfree(stream);
++}
++
++
+ int zlib_uncompress(struct squashfs_sb_info *msblk, void **buffer,
+ 	struct buffer_head **bh, int b, int offset, int length, int srclength,
+ 	int pages)
+ {
+ 	int zlib_err = 0, zlib_init = 0;
+ 	int avail, bytes, k = 0, page = 0;
++	z_stream *stream = msblk->stream;
+ 
+ 	mutex_lock(&msblk->read_data_mutex);
+ 
+-	msblk->stream.avail_out = 0;
+-	msblk->stream.avail_in = 0;
++	stream->avail_out = 0;
++	stream->avail_in = 0;
+ 
+ 	bytes = length;
+ 	do {
+-		if (msblk->stream.avail_in == 0 && k < b) {
++		if (stream->avail_in == 0 && k < b) {
+ 			avail = min(bytes, msblk->devblksize - offset);
+ 			bytes -= avail;
+ 			wait_on_buffer(bh[k]);
+@@ -58,18 +88,18 @@ int zlib_uncompress(struct squashfs_sb_i
+ 				continue;
+ 			}
+ 
+-			msblk->stream.next_in = bh[k]->b_data + offset;
+-			msblk->stream.avail_in = avail;
++			stream->next_in = bh[k]->b_data + offset;
++			stream->avail_in = avail;
+ 			offset = 0;
+ 		}
+ 
+-		if (msblk->stream.avail_out == 0 && page < pages) {
+-			msblk->stream.next_out = buffer[page++];
+-			msblk->stream.avail_out = PAGE_CACHE_SIZE;
++		if (stream->avail_out == 0 && page < pages) {
++			stream->next_out = buffer[page++];
++			stream->avail_out = PAGE_CACHE_SIZE;
+ 		}
+ 
+ 		if (!zlib_init) {
+-			zlib_err = zlib_inflateInit(&msblk->stream);
++			zlib_err = zlib_inflateInit(stream);
+ 			if (zlib_err != Z_OK) {
+ 				ERROR("zlib_inflateInit returned unexpected "
+ 					"result 0x%x, srclength %d\n",
+@@ -79,9 +109,9 @@ int zlib_uncompress(struct squashfs_sb_i
+ 			zlib_init = 1;
+ 		}
+ 
+-		zlib_err = zlib_inflate(&msblk->stream, Z_SYNC_FLUSH);
++		zlib_err = zlib_inflate(stream, Z_SYNC_FLUSH);
+ 
+-		if (msblk->stream.avail_in == 0 && k < b)
++		if (stream->avail_in == 0 && k < b)
+ 			put_bh(bh[k++]);
+ 	} while (zlib_err == Z_OK);
+ 
+@@ -90,14 +120,14 @@ int zlib_uncompress(struct squashfs_sb_i
+ 		goto release_mutex;
+ 	}
+ 
+-	zlib_err = zlib_inflateEnd(&msblk->stream);
++	zlib_err = zlib_inflateEnd(stream);
+ 	if (zlib_err != Z_OK) {
+ 		ERROR("zlib_inflate error, data probably corrupt\n");
+ 		goto release_mutex;
+ 	}
+ 
+ 	mutex_unlock(&msblk->read_data_mutex);
+-	return msblk->stream.total_out;
++	return stream->total_out;
+ 
+ release_mutex:
+ 	mutex_unlock(&msblk->read_data_mutex);
diff --git a/target/linux/generic/patches-2.6.31/003-squashfs_add_decompressor_framework.patch b/target/linux/generic/patches-2.6.31/003-squashfs_add_decompressor_framework.patch
new file mode 100644
index 0000000000..cbfbf53690
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/003-squashfs_add_decompressor_framework.patch
@@ -0,0 +1,426 @@
+From 327fbf47a419befc6bff74f3ca42d2b6f0841903 Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Tue, 6 Oct 2009 04:04:15 +0100
+Subject: [PATCH] Squashfs: add a decompressor framework
+
+This adds a decompressor framework which allows multiple compression
+algorithms to be cleanly supported.
+
+Also update zlib wrapper and other code to use the new framework.
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/Makefile         |    2 +-
+ fs/squashfs/block.c          |    6 ++--
+ fs/squashfs/decompressor.c   |   58 ++++++++++++++++++++++++++++++++++++++++++
+ fs/squashfs/decompressor.h   |   55 +++++++++++++++++++++++++++++++++++++++
+ fs/squashfs/squashfs.h       |   14 +++++-----
+ fs/squashfs/squashfs_fs_sb.h |   41 +++++++++++++++--------------
+ fs/squashfs/super.c          |   45 ++++++++++++++++++-------------
+ fs/squashfs/zlib_wrapper.c   |   17 ++++++++++--
+ 8 files changed, 185 insertions(+), 53 deletions(-)
+ create mode 100644 fs/squashfs/decompressor.c
+ create mode 100644 fs/squashfs/decompressor.h
+
+--- a/fs/squashfs/Makefile
++++ b/fs/squashfs/Makefile
+@@ -4,4 +4,4 @@
+ 
+ obj-$(CONFIG_SQUASHFS) += squashfs.o
+ squashfs-y += block.o cache.o dir.o export.o file.o fragment.o id.o inode.o
+-squashfs-y += namei.o super.o symlink.o zlib_wrapper.o
++squashfs-y += namei.o super.o symlink.o zlib_wrapper.o decompressor.o
+--- a/fs/squashfs/block.c
++++ b/fs/squashfs/block.c
+@@ -36,7 +36,7 @@
+ #include "squashfs_fs_sb.h"
+ #include "squashfs_fs_i.h"
+ #include "squashfs.h"
+-
++#include "decompressor.h"
+ /*
+  * Read the metadata block length, this is stored in the first two
+  * bytes of the metadata block.
+@@ -151,8 +151,8 @@ int squashfs_read_data(struct super_bloc
+ 	}
+ 
+ 	if (compressed) {
+-		length = zlib_uncompress(msblk, buffer, bh, b, offset, length,
+-			srclength, pages);
++		length = squashfs_decompress(msblk, buffer, bh, b, offset,
++			length, srclength, pages);
+ 		if (length < 0)
+ 			goto read_failure;
+ 	} else {
+--- /dev/null
++++ b/fs/squashfs/decompressor.c
+@@ -0,0 +1,58 @@
++/*
++ * Squashfs - a compressed read only filesystem for Linux
++ *
++ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
++ * Phillip Lougher <phillip@lougher.demon.co.uk>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2,
++ * or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++ *
++ * decompressor.c
++ */
++
++#include <linux/types.h>
++#include <linux/mutex.h>
++#include <linux/buffer_head.h>
++
++#include "squashfs_fs.h"
++#include "squashfs_fs_sb.h"
++#include "squashfs_fs_i.h"
++#include "decompressor.h"
++#include "squashfs.h"
++
++/*
++ * This file (and decompressor.h) implements a decompressor framework for
++ * Squashfs, allowing multiple decompressors to be easily supported
++ */
++
++static const struct squashfs_decompressor squashfs_unknown_comp_ops = {
++	NULL, NULL, NULL, 0, "unknown", 0
++};
++
++static const struct squashfs_decompressor *decompressor[] = {
++	&squashfs_zlib_comp_ops,
++	&squashfs_unknown_comp_ops
++};
++
++
++const struct squashfs_decompressor *squashfs_lookup_decompressor(int id)
++{
++	int i;
++
++	for (i = 0; decompressor[i]->id; i++)
++		if (id == decompressor[i]->id)
++			break;
++
++	return decompressor[i];
++}
+--- /dev/null
++++ b/fs/squashfs/decompressor.h
+@@ -0,0 +1,55 @@
++#ifndef DECOMPRESSOR_H
++#define DECOMPRESSOR_H
++/*
++ * Squashfs - a compressed read only filesystem for Linux
++ *
++ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
++ * Phillip Lougher <phillip@lougher.demon.co.uk>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2,
++ * or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++ *
++ * decompressor.h
++ */
++
++struct squashfs_decompressor {
++	void	*(*init)(void);
++	void	(*free)(void *);
++	int	(*decompress)(struct squashfs_sb_info *, void **,
++		struct buffer_head **, int, int, int, int, int);
++	int	id;
++	char	*name;
++	int	supported;
++};
++
++static inline void *squashfs_decompressor_init(struct squashfs_sb_info *msblk)
++{
++	return msblk->decompressor->init();
++}
++
++static inline void squashfs_decompressor_free(struct squashfs_sb_info *msblk,
++	void *s)
++{
++	if (msblk->decompressor)
++		msblk->decompressor->free(s);
++}
++
++static inline int squashfs_decompress(struct squashfs_sb_info *msblk,
++	void **buffer, struct buffer_head **bh, int b, int offset, int length,
++	int srclength, int pages)
++{
++	return msblk->decompressor->decompress(msblk, buffer, bh, b, offset,
++		length, srclength, pages);
++}
++#endif
+--- a/fs/squashfs/squashfs.h
++++ b/fs/squashfs/squashfs.h
+@@ -51,6 +51,9 @@ extern struct squashfs_cache_entry *squa
+ 				u64, int);
+ extern int squashfs_read_table(struct super_block *, void *, u64, int);
+ 
++/* decompressor.c */
++extern const struct squashfs_decompressor *squashfs_lookup_decompressor(int);
++
+ /* export.c */
+ extern __le64 *squashfs_read_inode_lookup_table(struct super_block *, u64,
+ 				unsigned int);
+@@ -70,14 +73,8 @@ extern struct inode *squashfs_iget(struc
+ 				unsigned int);
+ extern int squashfs_read_inode(struct inode *, long long);
+ 
+-/* zlib_wrapper.c */
+-extern void *zlib_init(void);
+-extern void zlib_free(void *);
+-extern int zlib_uncompress(struct squashfs_sb_info *, void **,
+-				struct buffer_head **, int, int, int, int, int);
+-
+ /*
+- * Inodes and files operations
++ * Inodes, files and decompressor operations
+  */
+ 
+ /* dir.c */
+@@ -94,3 +91,6 @@ extern const struct inode_operations squ
+ 
+ /* symlink.c */
+ extern const struct address_space_operations squashfs_symlink_aops;
++
++/* zlib_wrapper.c */
++extern const struct squashfs_decompressor squashfs_zlib_comp_ops;
+--- a/fs/squashfs/squashfs_fs_sb.h
++++ b/fs/squashfs/squashfs_fs_sb.h
+@@ -52,25 +52,26 @@ struct squashfs_cache_entry {
+ };
+ 
+ struct squashfs_sb_info {
+-	int			devblksize;
+-	int			devblksize_log2;
+-	struct squashfs_cache	*block_cache;
+-	struct squashfs_cache	*fragment_cache;
+-	struct squashfs_cache	*read_page;
+-	int			next_meta_index;
+-	__le64			*id_table;
+-	__le64			*fragment_index;
+-	unsigned int		*fragment_index_2;
+-	struct mutex		read_data_mutex;
+-	struct mutex		meta_index_mutex;
+-	struct meta_index	*meta_index;
+-	void			*stream;
+-	__le64			*inode_lookup_table;
+-	u64			inode_table;
+-	u64			directory_table;
+-	unsigned int		block_size;
+-	unsigned short		block_log;
+-	long long		bytes_used;
+-	unsigned int		inodes;
++	const struct squashfs_decompressor	*decompressor;
++	int					devblksize;
++	int					devblksize_log2;
++	struct squashfs_cache			*block_cache;
++	struct squashfs_cache			*fragment_cache;
++	struct squashfs_cache			*read_page;
++	int					next_meta_index;
++	__le64					*id_table;
++	__le64					*fragment_index;
++	unsigned int				*fragment_index_2;
++	struct mutex				read_data_mutex;
++	struct mutex				meta_index_mutex;
++	struct meta_index			*meta_index;
++	void					*stream;
++	__le64					*inode_lookup_table;
++	u64					inode_table;
++	u64					directory_table;
++	unsigned int				block_size;
++	unsigned short				block_log;
++	long long				bytes_used;
++	unsigned int				inodes;
+ };
+ #endif
+--- a/fs/squashfs/super.c
++++ b/fs/squashfs/super.c
+@@ -41,27 +41,35 @@
+ #include "squashfs_fs_sb.h"
+ #include "squashfs_fs_i.h"
+ #include "squashfs.h"
++#include "decompressor.h"
+ 
+ static struct file_system_type squashfs_fs_type;
+ static struct super_operations squashfs_super_ops;
+ 
+-static int supported_squashfs_filesystem(short major, short minor, short comp)
++static const struct squashfs_decompressor *supported_squashfs_filesystem(short
++	major, short minor, short id)
+ {
++	const struct squashfs_decompressor *decompressor;
++
+ 	if (major < SQUASHFS_MAJOR) {
+ 		ERROR("Major/Minor mismatch, older Squashfs %d.%d "
+ 			"filesystems are unsupported\n", major, minor);
+-		return -EINVAL;
++		return NULL;
+ 	} else if (major > SQUASHFS_MAJOR || minor > SQUASHFS_MINOR) {
+ 		ERROR("Major/Minor mismatch, trying to mount newer "
+ 			"%d.%d filesystem\n", major, minor);
+ 		ERROR("Please update your kernel\n");
+-		return -EINVAL;
++		return NULL;
+ 	}
+ 
+-	if (comp != ZLIB_COMPRESSION)
+-		return -EINVAL;
++	decompressor = squashfs_lookup_decompressor(id);
++	if (!decompressor->supported) {
++		ERROR("Filesystem uses \"%s\" compression. This is not "
++			"supported\n", decompressor->name);
++		return NULL;
++	}
+ 
+-	return 0;
++	return decompressor;
+ }
+ 
+ 
+@@ -86,10 +94,6 @@ static int squashfs_fill_super(struct su
+ 	}
+ 	msblk = sb->s_fs_info;
+ 
+-	msblk->stream = zlib_init();
+-	if (msblk->stream == NULL)
+-		goto failure;
+-
+ 	sblk = kzalloc(sizeof(*sblk), GFP_KERNEL);
+ 	if (sblk == NULL) {
+ 		ERROR("Failed to allocate squashfs_super_block\n");
+@@ -116,25 +120,25 @@ static int squashfs_fill_super(struct su
+ 		goto failed_mount;
+ 	}
+ 
++	err = -EINVAL;
++
+ 	/* Check it is a SQUASHFS superblock */
+ 	sb->s_magic = le32_to_cpu(sblk->s_magic);
+ 	if (sb->s_magic != SQUASHFS_MAGIC) {
+ 		if (!silent)
+ 			ERROR("Can't find a SQUASHFS superblock on %s\n",
+ 						bdevname(sb->s_bdev, b));
+-		err = -EINVAL;
+ 		goto failed_mount;
+ 	}
+ 
+-	/* Check the MAJOR & MINOR versions and compression type */
+-	err = supported_squashfs_filesystem(le16_to_cpu(sblk->s_major),
++	/* Check the MAJOR & MINOR versions and lookup compression type */
++	msblk->decompressor = supported_squashfs_filesystem(
++			le16_to_cpu(sblk->s_major),
+ 			le16_to_cpu(sblk->s_minor),
+ 			le16_to_cpu(sblk->compression));
+-	if (err < 0)
++	if (msblk->decompressor == NULL)
+ 		goto failed_mount;
+ 
+-	err = -EINVAL;
+-
+ 	/*
+ 	 * Check if there's xattrs in the filesystem.  These are not
+ 	 * supported in this version, so warn that they will be ignored.
+@@ -201,6 +205,10 @@ static int squashfs_fill_super(struct su
+ 
+ 	err = -ENOMEM;
+ 
++	msblk->stream = squashfs_decompressor_init(msblk);
++	if (msblk->stream == NULL)
++		goto failed_mount;
++
+ 	msblk->block_cache = squashfs_cache_init("metadata",
+ 			SQUASHFS_CACHED_BLKS, SQUASHFS_METADATA_SIZE);
+ 	if (msblk->block_cache == NULL)
+@@ -288,7 +296,7 @@ failed_mount:
+ 	squashfs_cache_delete(msblk->block_cache);
+ 	squashfs_cache_delete(msblk->fragment_cache);
+ 	squashfs_cache_delete(msblk->read_page);
+-	zlib_free(msblk->stream);
++	squashfs_decompressor_free(msblk, msblk->stream);
+ 	kfree(msblk->inode_lookup_table);
+ 	kfree(msblk->fragment_index);
+ 	kfree(msblk->id_table);
+@@ -298,7 +306,6 @@ failed_mount:
+ 	return err;
+ 
+ failure:
+-	zlib_free(msblk->stream);
+ 	kfree(sb->s_fs_info);
+ 	sb->s_fs_info = NULL;
+ 	return -ENOMEM;
+@@ -342,7 +349,7 @@ static void squashfs_put_super(struct su
+ 		squashfs_cache_delete(sbi->block_cache);
+ 		squashfs_cache_delete(sbi->fragment_cache);
+ 		squashfs_cache_delete(sbi->read_page);
+-		zlib_free(sbi->stream);
++		squashfs_decompressor_free(sbi, sbi->stream);
+ 		kfree(sbi->id_table);
+ 		kfree(sbi->fragment_index);
+ 		kfree(sbi->meta_index);
+--- a/fs/squashfs/zlib_wrapper.c
++++ b/fs/squashfs/zlib_wrapper.c
+@@ -30,8 +30,9 @@
+ #include "squashfs_fs_sb.h"
+ #include "squashfs_fs_i.h"
+ #include "squashfs.h"
++#include "decompressor.h"
+ 
+-void *zlib_init()
++static void *zlib_init(void)
+ {
+ 	z_stream *stream = kmalloc(sizeof(z_stream), GFP_KERNEL);
+ 	if (stream == NULL)
+@@ -50,7 +51,7 @@ failed:
+ }
+ 
+ 
+-void zlib_free(void *strm)
++static void zlib_free(void *strm)
+ {
+ 	z_stream *stream = strm;
+ 
+@@ -60,7 +61,7 @@ void zlib_free(void *strm)
+ }
+ 
+ 
+-int zlib_uncompress(struct squashfs_sb_info *msblk, void **buffer,
++static int zlib_uncompress(struct squashfs_sb_info *msblk, void **buffer,
+ 	struct buffer_head **bh, int b, int offset, int length, int srclength,
+ 	int pages)
+ {
+@@ -137,3 +138,13 @@ release_mutex:
+ 
+ 	return -EIO;
+ }
++
++const struct squashfs_decompressor squashfs_zlib_comp_ops = {
++	.init = zlib_init,
++	.free = zlib_free,
++	.decompress = zlib_uncompress,
++	.id = ZLIB_COMPRESSION,
++	.name = "zlib",
++	.supported = 1
++};
++
diff --git a/target/linux/generic/patches-2.6.31/004-squashfs_add_decompressor_lzma_lzo.patch b/target/linux/generic/patches-2.6.31/004-squashfs_add_decompressor_lzma_lzo.patch
new file mode 100644
index 0000000000..a378c00058
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/004-squashfs_add_decompressor_lzma_lzo.patch
@@ -0,0 +1,54 @@
+From 1885ca0a1973944684f252094a703b7c80dfc974 Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Wed, 14 Oct 2009 03:58:11 +0100
+Subject: [PATCH] Squashfs: add decompressor entries for lzma and lzo
+
+Add knowledge of lzma/lzo compression formats to the decompressor
+framework.  For now these are added as unsupported.  Without
+these entries lzma/lzo compressed filesystems will be flagged as
+having unknown compression which is undesirable.
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/decompressor.c |   10 ++++++++++
+ fs/squashfs/squashfs_fs.h  |    4 +++-
+ 2 files changed, 13 insertions(+), 1 deletions(-)
+
+--- a/fs/squashfs/decompressor.c
++++ b/fs/squashfs/decompressor.c
+@@ -36,12 +36,22 @@
+  * Squashfs, allowing multiple decompressors to be easily supported
+  */
+ 
++static const struct squashfs_decompressor squashfs_lzma_unsupported_comp_ops = {
++	NULL, NULL, NULL, LZMA_COMPRESSION, "lzma", 0
++};
++
++static const struct squashfs_decompressor squashfs_lzo_unsupported_comp_ops = {
++	NULL, NULL, NULL, LZO_COMPRESSION, "lzo", 0
++};
++
+ static const struct squashfs_decompressor squashfs_unknown_comp_ops = {
+ 	NULL, NULL, NULL, 0, "unknown", 0
+ };
+ 
+ static const struct squashfs_decompressor *decompressor[] = {
+ 	&squashfs_zlib_comp_ops,
++	&squashfs_lzma_unsupported_comp_ops,
++	&squashfs_lzo_unsupported_comp_ops,
+ 	&squashfs_unknown_comp_ops
+ };
+ 
+--- a/fs/squashfs/squashfs_fs.h
++++ b/fs/squashfs/squashfs_fs.h
+@@ -211,7 +211,9 @@ struct meta_index {
+ /*
+  * definitions for structures on disk
+  */
+-#define ZLIB_COMPRESSION	 1
++#define ZLIB_COMPRESSION	1
++#define LZMA_COMPRESSION	2
++#define LZO_COMPRESSION		3
+ 
+ struct squashfs_super_block {
+ 	__le32			s_magic;
diff --git a/target/linux/generic/patches-2.6.31/005-squashfs_extra_parameter.patch b/target/linux/generic/patches-2.6.31/005-squashfs_extra_parameter.patch
new file mode 100644
index 0000000000..0991681346
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/005-squashfs_extra_parameter.patch
@@ -0,0 +1,42 @@
+From 5f393ede3ddb5dd4cc2a9f243182fac45f1ce10b Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Wed, 14 Oct 2009 04:07:54 +0100
+Subject: [PATCH] Squashfs: add an extra parameter to the decompressor init function
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/decompressor.h |    4 ++--
+ fs/squashfs/zlib_wrapper.c |    2 +-
+ 2 files changed, 3 insertions(+), 3 deletions(-)
+
+--- a/fs/squashfs/decompressor.h
++++ b/fs/squashfs/decompressor.h
+@@ -24,7 +24,7 @@
+  */
+ 
+ struct squashfs_decompressor {
+-	void	*(*init)(void);
++	void	*(*init)(struct squashfs_sb_info *);
+ 	void	(*free)(void *);
+ 	int	(*decompress)(struct squashfs_sb_info *, void **,
+ 		struct buffer_head **, int, int, int, int, int);
+@@ -35,7 +35,7 @@ struct squashfs_decompressor {
+ 
+ static inline void *squashfs_decompressor_init(struct squashfs_sb_info *msblk)
+ {
+-	return msblk->decompressor->init();
++	return msblk->decompressor->init(msblk);
+ }
+ 
+ static inline void squashfs_decompressor_free(struct squashfs_sb_info *msblk,
+--- a/fs/squashfs/zlib_wrapper.c
++++ b/fs/squashfs/zlib_wrapper.c
+@@ -32,7 +32,7 @@
+ #include "squashfs.h"
+ #include "decompressor.h"
+ 
+-static void *zlib_init(void)
++static void *zlib_init(struct squashfs_sb_info *dummy)
+ {
+ 	z_stream *stream = kmalloc(sizeof(z_stream), GFP_KERNEL);
+ 	if (stream == NULL)
diff --git a/target/linux/generic/patches-2.6.31/006-squashfs_add_lzma.patch b/target/linux/generic/patches-2.6.31/006-squashfs_add_lzma.patch
new file mode 100644
index 0000000000..9fd57970f2
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/006-squashfs_add_lzma.patch
@@ -0,0 +1,216 @@
+From f49e1efdd179d54e814ff2a8e8f469496583062c Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Tue, 20 Oct 2009 10:54:36 +0100
+Subject: [PATCH] Squashfs: add LZMA compression
+
+Add support for LZMA compressed filesystems.  This is an initial
+implementation.
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/Kconfig        |    5 ++
+ fs/squashfs/Makefile       |    1 +
+ fs/squashfs/decompressor.c |    4 +
+ fs/squashfs/lzma_wrapper.c |  151 ++++++++++++++++++++++++++++++++++++++++++++
+ fs/squashfs/squashfs.h     |    3 +
+ 5 files changed, 164 insertions(+), 0 deletions(-)
+ create mode 100644 fs/squashfs/lzma_wrapper.c
+
+--- a/fs/squashfs/Kconfig
++++ b/fs/squashfs/Kconfig
+@@ -26,6 +26,11 @@ config SQUASHFS
+ 
+ 	  If unsure, say N.
+ 
++config SQUASHFS_LZMA
++	bool "Include support for LZMA compressed file systems"
++	depends on SQUASHFS
++	select DECOMPRESS_LZMA
++
+ config SQUASHFS_EMBEDDED
+ 
+ 	bool "Additional option for memory-constrained systems" 
+--- a/fs/squashfs/Makefile
++++ b/fs/squashfs/Makefile
+@@ -5,3 +5,4 @@
+ obj-$(CONFIG_SQUASHFS) += squashfs.o
+ squashfs-y += block.o cache.o dir.o export.o file.o fragment.o id.o inode.o
+ squashfs-y += namei.o super.o symlink.o zlib_wrapper.o decompressor.o
++squashfs-$(CONFIG_SQUASHFS_LZMA) += lzma_wrapper.o
+--- a/fs/squashfs/decompressor.c
++++ b/fs/squashfs/decompressor.c
+@@ -50,7 +50,11 @@ static const struct squashfs_decompresso
+ 
+ static const struct squashfs_decompressor *decompressor[] = {
+ 	&squashfs_zlib_comp_ops,
++#ifdef CONFIG_SQUASHFS_LZMA
++	&squashfs_lzma_comp_ops,
++#else
+ 	&squashfs_lzma_unsupported_comp_ops,
++#endif
+ 	&squashfs_lzo_unsupported_comp_ops,
+ 	&squashfs_unknown_comp_ops
+ };
+--- /dev/null
++++ b/fs/squashfs/lzma_wrapper.c
+@@ -0,0 +1,151 @@
++/*
++ * Squashfs - a compressed read only filesystem for Linux
++ *
++ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
++ * Phillip Lougher <phillip@lougher.demon.co.uk>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2,
++ * or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++ *
++ * lzma_wrapper.c
++ */
++
++#include <asm/unaligned.h>
++#include <linux/buffer_head.h>
++#include <linux/mutex.h>
++#include <linux/vmalloc.h>
++#include <linux/decompress/unlzma.h>
++
++#include "squashfs_fs.h"
++#include "squashfs_fs_sb.h"
++#include "squashfs_fs_i.h"
++#include "squashfs.h"
++#include "decompressor.h"
++
++struct squashfs_lzma {
++	void	*input;
++	void	*output;
++};
++
++/* decompress_unlzma.c is currently non re-entrant... */
++DEFINE_MUTEX(lzma_mutex);
++
++/* decompress_unlzma.c doesn't provide any context in its callbacks... */
++static int lzma_error;
++
++static void error(char *m)
++{
++	ERROR("unlzma error: %s\n", m);
++	lzma_error = 1;
++}
++
++	
++static void *lzma_init(struct squashfs_sb_info *msblk)
++{
++	struct squashfs_lzma *stream = kzalloc(sizeof(*stream), GFP_KERNEL);
++	if (stream == NULL)
++		goto failed;
++	stream->input = vmalloc(msblk->block_size);
++	if (stream->input == NULL)
++		goto failed;
++	stream->output = vmalloc(msblk->block_size);
++	if (stream->output == NULL)
++		goto failed2;
++
++	return stream;
++
++failed2:
++	vfree(stream->input);
++failed:
++	ERROR("failed to allocate lzma workspace\n");
++	kfree(stream);
++	return NULL;
++}
++
++
++static void lzma_free(void *strm)
++{
++	struct squashfs_lzma *stream = strm;
++
++	if (stream) {
++		vfree(stream->input);
++		vfree(stream->output);
++	}
++	kfree(stream);
++}
++
++
++static int lzma_uncompress(struct squashfs_sb_info *msblk, void **buffer,
++	struct buffer_head **bh, int b, int offset, int length, int srclength,
++	int pages)
++{
++	struct squashfs_lzma *stream = msblk->stream;
++	void *buff = stream->input;
++	int avail, i, bytes = length, res;
++
++	mutex_lock(&lzma_mutex);
++
++	for (i = 0; i < b; i++) {
++		wait_on_buffer(bh[i]);
++		if (!buffer_uptodate(bh[i]))
++			goto block_release;
++
++		avail = min(bytes, msblk->devblksize - offset);
++		memcpy(buff, bh[i]->b_data + offset, avail);
++		buff += avail;
++		bytes -= avail;
++		offset = 0;
++		put_bh(bh[i]);
++	}
++
++	lzma_error = 0;
++	res = unlzma(stream->input, length, NULL, NULL, stream->output, NULL,
++							error);
++	if (res || lzma_error)
++		goto failed;
++
++	/* uncompressed size is stored in the LZMA header (5 byte offset) */
++	res = bytes = get_unaligned_le32(stream->input + 5);
++	for (i = 0, buff = stream->output; bytes && i < pages; i++) {
++		avail = min_t(int, bytes, PAGE_CACHE_SIZE);
++		memcpy(buffer[i], buff, avail);
++		buff += avail;
++		bytes -= avail;
++	}
++	if (bytes)
++		goto failed;
++
++	mutex_unlock(&lzma_mutex);
++	return res;
++
++block_release:
++	for (; i < b; i++)
++		put_bh(bh[i]);
++
++failed:
++	mutex_unlock(&lzma_mutex);
++
++	ERROR("lzma decompression failed, data probably corrupt\n");
++	return -EIO;
++}
++
++const struct squashfs_decompressor squashfs_lzma_comp_ops = {
++	.init = lzma_init,
++	.free = lzma_free,
++	.decompress = lzma_uncompress,
++	.id = LZMA_COMPRESSION,
++	.name = "lzma",
++	.supported = 1
++};
++
+--- a/fs/squashfs/squashfs.h
++++ b/fs/squashfs/squashfs.h
+@@ -94,3 +94,6 @@ extern const struct address_space_operat
+ 
+ /* zlib_wrapper.c */
+ extern const struct squashfs_decompressor squashfs_zlib_comp_ops;
++
++/* lzma wrapper.c */
++extern const struct squashfs_decompressor squashfs_lzma_comp_ops;
diff --git a/target/linux/generic/patches-2.6.31/007-squashfs_make_lzma_available.patch b/target/linux/generic/patches-2.6.31/007-squashfs_make_lzma_available.patch
new file mode 100644
index 0000000000..aa6c110129
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/007-squashfs_make_lzma_available.patch
@@ -0,0 +1,165 @@
+From fdf23ed283bc6ef5c25076ce2065f892120ff556 Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Thu, 22 Oct 2009 04:57:38 +0100
+Subject: [PATCH] Squashfs: Make unlzma available to non initramfs/initrd code
+
+Add a config option DECOMPRESS_LZMA_NEEDED which allows subsystems to
+specify they need the unlzma code.  Normally decompress_unlzma.c is
+compiled with __init and unlzma is not exported to modules.
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/Kconfig                   |    1 +
+ include/linux/decompress/bunzip2_mm.h |   12 ++++++++++++
+ include/linux/decompress/inflate_mm.h |   12 ++++++++++++
+ include/linux/decompress/mm.h         |    3 ---
+ include/linux/decompress/unlzma_mm.h  |   20 ++++++++++++++++++++
+ lib/Kconfig                           |    3 +++
+ lib/decompress_bunzip2.c              |    1 +
+ lib/decompress_inflate.c              |    1 +
+ lib/decompress_unlzma.c               |    5 ++++-
+ 9 files changed, 54 insertions(+), 4 deletions(-)
+ create mode 100644 include/linux/decompress/bunzip2_mm.h
+ create mode 100644 include/linux/decompress/inflate_mm.h
+ create mode 100644 include/linux/decompress/unlzma_mm.h
+
+--- a/fs/squashfs/Kconfig
++++ b/fs/squashfs/Kconfig
+@@ -30,6 +30,7 @@ config SQUASHFS_LZMA
+ 	bool "Include support for LZMA compressed file systems"
+ 	depends on SQUASHFS
+ 	select DECOMPRESS_LZMA
++	select DECOMPRESS_LZMA_NEEDED
+ 
+ config SQUASHFS_EMBEDDED
+ 
+--- /dev/null
++++ b/include/linux/decompress/bunzip2_mm.h
+@@ -0,0 +1,12 @@
++#ifndef BUNZIP2_MM_H
++#define BUNZIP2_MM_H
++
++#ifdef STATIC
++/* Code active when included from pre-boot environment: */
++#define INIT
++#else
++/* Compile for initramfs/initrd code only */
++#define INIT __init
++#endif
++
++#endif
+--- /dev/null
++++ b/include/linux/decompress/inflate_mm.h
+@@ -0,0 +1,12 @@
++#ifndef INFLATE_MM_H
++#define INFLATE_MM_H
++
++#ifdef STATIC
++/* Code active when included from pre-boot environment: */
++#define INIT
++#else
++/* Compile for initramfs/initrd code only */
++#define INIT __init
++#endif
++
++#endif
+--- a/include/linux/decompress/mm.h
++++ b/include/linux/decompress/mm.h
+@@ -53,8 +53,6 @@ static void free(void *where)
+ 
+ #define set_error_fn(x)
+ 
+-#define INIT
+-
+ #else /* STATIC */
+ 
+ /* Code active when compiled standalone for use when loading ramdisk: */
+@@ -77,7 +75,6 @@ static void free(void *where)
+ static void(*error)(char *m);
+ #define set_error_fn(x) error = x;
+ 
+-#define INIT __init
+ #define STATIC
+ 
+ #include <linux/init.h>
+--- /dev/null
++++ b/include/linux/decompress/unlzma_mm.h
+@@ -0,0 +1,20 @@
++#ifndef UNLZMA_MM_H
++#define UNLZMA_MM_H
++
++#ifdef STATIC
++
++/* Code active when included from pre-boot environment: */
++#define INIT
++
++#elif defined(CONFIG_DECOMPRESS_LZMA_NEEDED)
++
++/* Make it available to non initramfs/initrd code */
++#define INIT
++#include <linux/module.h>
++#else
++
++/* Compile for initramfs/initrd code only */
++#define INIT __init
++#endif
++
++#endif
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -117,6 +117,9 @@ config DECOMPRESS_BZIP2
+ config DECOMPRESS_LZMA
+ 	tristate
+ 
++config DECOMPRESS_LZMA_NEEDED
++	 boolean
++
+ #
+ # Generic allocator support is selected if needed
+ #
+--- a/lib/decompress_bunzip2.c
++++ b/lib/decompress_bunzip2.c
+@@ -52,6 +52,7 @@
+ #include <linux/slab.h>
+ #endif /* STATIC */
+ 
++#include <linux/decompress/bunzip2_mm.h>
+ #include <linux/decompress/mm.h>
+ 
+ #ifndef INT_MAX
+--- a/lib/decompress_inflate.c
++++ b/lib/decompress_inflate.c
+@@ -23,6 +23,7 @@
+ 
+ #endif /* STATIC */
+ 
++#include <linux/decompress/inflate_mm.h>
+ #include <linux/decompress/mm.h>
+ 
+ #define GZIP_IOBUF_SIZE (16*1024)
+--- a/lib/decompress_unlzma.c
++++ b/lib/decompress_unlzma.c
+@@ -36,6 +36,7 @@
+ #include <linux/slab.h>
+ #endif /* STATIC */
+ 
++#include <linux/decompress/unlzma_mm.h>
+ #include <linux/decompress/mm.h>
+ 
+ #define	MIN(a, b) (((a) < (b)) ? (a) : (b))
+@@ -523,7 +524,7 @@ static inline void INIT process_bit1(str
+ 
+ 
+ 
+-STATIC inline int INIT unlzma(unsigned char *buf, int in_len,
++STATIC int INIT unlzma(unsigned char *buf, int in_len,
+ 			      int(*fill)(void*, unsigned int),
+ 			      int(*flush)(void*, unsigned int),
+ 			      unsigned char *output,
+@@ -656,4 +657,6 @@ STATIC int INIT decompress(unsigned char
+ {
+ 	return unlzma(buf, in_len - 4, fill, flush, output, posp, error_fn);
+ }
++#elif defined(CONFIG_DECOMPRESS_LZMA_NEEDED)
++EXPORT_SYMBOL(unlzma);
+ #endif
diff --git a/target/linux/generic/patches-2.6.31/011-mips_boot.patch b/target/linux/generic/patches-2.6.31/011-mips_boot.patch
new file mode 100644
index 0000000000..c2a043acde
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/011-mips_boot.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
+@@ -121,6 +121,8 @@
+ #endif
+ 	.endm
+ 
++	j kernel_entry
++	nop
+ #ifndef CONFIG_NO_EXCEPT_FILL
+ 	/*
+ 	 * Reserved space for exception handlers.
diff --git a/target/linux/generic/patches-2.6.31/012-extra_optimization.patch b/target/linux/generic/patches-2.6.31/012-extra_optimization.patch
new file mode 100644
index 0000000000..e0ba51598e
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/012-extra_optimization.patch
@@ -0,0 +1,21 @@
+--- a/Makefile
++++ b/Makefile
+@@ -521,7 +521,7 @@ all: vmlinux
+ ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+ KBUILD_CFLAGS	+= -Os
+ else
+-KBUILD_CFLAGS	+= -O2
++KBUILD_CFLAGS	+= -O2 -fno-reorder-blocks -fno-tree-ch
+ endif
+ 
+ include $(srctree)/arch/$(SRCARCH)/Makefile
+@@ -559,6 +559,9 @@ endif
+ NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
+ CHECKFLAGS     += $(NOSTDINC_FLAGS)
+ 
++# improve gcc optimization
++CFLAGS += $(call cc-option,-funit-at-a-time,)
++
+ # warn about C99 declaration after statement
+ KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
+ 
diff --git a/target/linux/generic/patches-2.6.31/013-gcc4_inline_fix.patch b/target/linux/generic/patches-2.6.31/013-gcc4_inline_fix.patch
new file mode 100644
index 0000000000..642f11b21f
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/013-gcc4_inline_fix.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/include/asm/system.h
++++ b/arch/mips/include/asm/system.h
+@@ -187,7 +187,7 @@ extern __u64 __xchg_u64_unsupported_on_3
+    if something tries to do an invalid xchg().  */
+ extern void __xchg_called_with_bad_pointer(void);
+ 
+-static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
++static __always_inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+ {
+ 	switch (size) {
+ 	case 4:
diff --git a/target/linux/generic/patches-2.6.31/014-samsung_flash b/target/linux/generic/patches-2.6.31/014-samsung_flash
new file mode 100644
index 0000000000..e2a456915c
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/014-samsung_flash
@@ -0,0 +1,36 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -51,6 +51,7 @@
+ #define SST49LF040B	        0x0050
+ #define SST49LF008A		0x005a
+ #define AT49BV6416		0x00d6
++#define MANUFACTURER_SAMSUNG	0x00ec
+ 
+ static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
+@@ -375,12 +376,19 @@ struct mtd_info *cfi_cmdset_0002(struct
+ 
+ 		if (extp->MajorVersion != '1' ||
+ 		    (extp->MinorVersion < '0' || extp->MinorVersion > '4')) {
+-			printk(KERN_ERR "  Unknown Amd/Fujitsu Extended Query "
+-			       "version %c.%c.\n",  extp->MajorVersion,
+-			       extp->MinorVersion);
+-			kfree(extp);
+-			kfree(mtd);
+-			return NULL;
++		        if (cfi->mfr == MANUFACTURER_SAMSUNG &&
++			    (extp->MajorVersion == '3' && extp->MinorVersion == '3')) {
++			    printk(KERN_NOTICE "  Newer Samsung flash detected, "
++			           "should be compatibile with Amd/Fujitsu.\n");
++		        }
++		        else {
++			    printk(KERN_ERR "  Unknown Amd/Fujitsu Extended Query "
++			           "version %c.%c.\n",  extp->MajorVersion,
++			           extp->MinorVersion);
++			    kfree(extp);
++			    kfree(mtd);
++			    return NULL;
++		        }
+ 		}
+ 
+ 		/* Install our own private info structure */
diff --git a/target/linux/generic/patches-2.6.31/020-mips_multi_machine_support.patch b/target/linux/generic/patches-2.6.31/020-mips_multi_machine_support.patch
new file mode 100644
index 0000000000..8f4cf575d0
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/020-mips_multi_machine_support.patch
@@ -0,0 +1,173 @@
+--- /dev/null
++++ b/arch/mips/include/asm/mips_machine.h
+@@ -0,0 +1,47 @@
++/*
++ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ */
++
++#ifndef __ASM_MIPS_MACHINE_H
++#define __ASM_MIPS_MACHINE_H
++
++#include <linux/init.h>
++#include <linux/list.h>
++
++struct mips_machine {
++	unsigned long		mach_type;
++	void			(*mach_setup)(void);
++	char			*mach_name;
++	struct list_head	list;
++};
++
++void mips_machine_register(struct mips_machine *) __init;
++void mips_machine_setup(unsigned long machtype) __init;
++void mips_machine_set_name(char *name) __init;
++
++extern char *mips_machine_name;
++
++#define MIPS_MACHINE(_type, _name, _setup) 			\
++static char machine_name_##_type[] __initdata = _name;		\
++static struct mips_machine machine_##_type __initdata =		\
++{								\
++	.mach_type	= _type,				\
++	.mach_name	= machine_name_##_type,			\
++	.mach_setup	= _setup,				\
++};								\
++								\
++static int __init register_machine_##_type(void)		\
++{								\
++	mips_machine_register(&machine_##_type);		\
++	return 0;						\
++}								\
++								\
++pure_initcall(register_machine_##_type)
++
++#endif /* __ASM_MIPS_MACHINE_H */
++
+--- /dev/null
++++ b/arch/mips/kernel/mips_machine.c
+@@ -0,0 +1,74 @@
++/*
++ *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ */
++#include <linux/mm.h>
++
++#include <asm/mips_machine.h>
++#include <asm/bootinfo.h>
++
++static struct list_head mips_machines __initdata =
++		LIST_HEAD_INIT(mips_machines);
++
++char *mips_machine_name = "Unknown";
++
++static struct mips_machine * __init mips_machine_find(unsigned long machtype)
++{
++	struct list_head *this;
++
++	list_for_each(this, &mips_machines) {
++		struct mips_machine *mach;
++
++		mach = list_entry(this, struct mips_machine, list);
++		if (mach->mach_type == machtype)
++			return mach;
++	}
++
++	return NULL;
++}
++
++void __init mips_machine_register(struct mips_machine *mach)
++{
++	list_add_tail(&mach->list, &mips_machines);
++}
++
++void __init mips_machine_set_name(char *name)
++{
++	unsigned int len;
++	char *p;
++
++	if (name == NULL)
++		return;
++
++	len = strlen(name);
++	p = kmalloc(len + 1, GFP_KERNEL);
++	if (p) {
++		strncpy(p, name, len);
++		p[len] = '\0';
++		mips_machine_name = p;
++	} else {
++		printk(KERN_WARNING "MIPS: no memory for machine_name\n");
++	}
++}
++
++void __init mips_machine_setup(unsigned long machtype)
++{
++	struct mips_machine *mach;
++
++	mach = mips_machine_find(machtype);
++	if (!mach) {
++		printk(KERN_ALERT "MIPS: no machine registered for "
++			"machtype %lu\n", machtype);
++		return;
++	}
++
++	mips_machine_set_name(mach->mach_name);
++	printk(KERN_INFO "MIPS: machine is %s\n", mips_machine_name);
++
++	if (mach->mach_setup)
++		mach->mach_setup();
++}
+--- a/arch/mips/kernel/Makefile
++++ b/arch/mips/kernel/Makefile
+@@ -87,6 +87,7 @@ obj-$(CONFIG_GPIO_TXX9)		+= gpio_txx9.o
+ 
+ obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
+ obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
++obj-$(CONFIG_MIPS_MACHINE)	+= mips_machine.o
+ 
+ CFLAGS_cpu-bugs64.o	= $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
+ 
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -837,6 +837,9 @@ config MIPS_DISABLE_OBSOLETE_IDE
+ config SYNC_R4K
+ 	bool
+ 
++config MIPS_MACHINE
++	def_bool n
++
+ config NO_IOPORT
+ 	def_bool n
+ 
+--- a/arch/mips/kernel/proc.c
++++ b/arch/mips/kernel/proc.c
+@@ -12,6 +12,7 @@
+ #include <asm/cpu-features.h>
+ #include <asm/mipsregs.h>
+ #include <asm/processor.h>
++#include <asm/mips_machine.h>
+ 
+ unsigned int vced_count, vcei_count;
+ 
+@@ -31,8 +32,12 @@ static int show_cpuinfo(struct seq_file
+ 	/*
+ 	 * For the first processor also print the system type
+ 	 */
+-	if (n == 0)
++	if (n == 0) {
+ 		seq_printf(m, "system type\t\t: %s\n", get_system_type());
++#ifdef CONFIG_MIPS_MACHINE
++		seq_printf(m, "machine\t\t\t: %s\n", mips_machine_name);
++#endif
++	}
+ 
+ 	seq_printf(m, "processor\t\t: %ld\n", n);
+ 	sprintf(fmt, "cpu model\t\t: %%s V%%d.%%d%s\n",
diff --git a/target/linux/generic/patches-2.6.31/021-mips_image_cmdline_hack.patch b/target/linux/generic/patches-2.6.31/021-mips_image_cmdline_hack.patch
new file mode 100644
index 0000000000..026a84b6a4
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/021-mips_image_cmdline_hack.patch
@@ -0,0 +1,28 @@
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -840,6 +840,10 @@ config SYNC_R4K
+ config MIPS_MACHINE
+ 	def_bool n
+ 
++config IMAGE_CMDLINE_HACK
++	bool "OpenWrt specific image command line hack"
++	default n
++
+ config NO_IOPORT
+ 	def_bool n
+ 
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
+@@ -143,6 +143,12 @@ FEXPORT(__kernel_entry)
+ 	j	kernel_entry
+ #endif
+ 
++#ifdef CONFIG_IMAGE_CMDLINE_HACK
++	.ascii	"CMDLINE:"
++EXPORT(__image_cmdline)
++	.fill	0x400
++#endif /* CONFIG_IMAGE_CMDLINE_HACK */
++
+ 	__REF
+ 
+ NESTED(kernel_entry, 16, sp)			# kernel entry point
diff --git a/target/linux/generic/patches-2.6.31/022-mips_use_generic_thread_info_allocator.patch b/target/linux/generic/patches-2.6.31/022-mips_use_generic_thread_info_allocator.patch
new file mode 100644
index 0000000000..737e51bd20
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/022-mips_use_generic_thread_info_allocator.patch
@@ -0,0 +1,18 @@
+--- a/arch/mips/include/asm/thread_info.h
++++ b/arch/mips/include/asm/thread_info.h
+@@ -83,6 +83,7 @@ register struct thread_info *__current_t
+ #define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER)
+ #define THREAD_MASK (THREAD_SIZE - 1UL)
+ 
++#if 0
+ #define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+ 
+ #ifdef CONFIG_DEBUG_STACK_USAGE
+@@ -99,6 +100,7 @@ register struct thread_info *__current_t
+ #endif
+ 
+ #define free_thread_info(info) kfree(info)
++#endif
+ 
+ #endif /* !__ASSEMBLY__ */
+ 
diff --git a/target/linux/generic/patches-2.6.31/023-mips-fix-kexec.patch b/target/linux/generic/patches-2.6.31/023-mips-fix-kexec.patch
new file mode 100644
index 0000000000..e6928dde91
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/023-mips-fix-kexec.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/kernel/machine_kexec.c
++++ b/arch/mips/kernel/machine_kexec.c
+@@ -52,7 +52,7 @@ machine_kexec(struct kimage *image)
+ 	reboot_code_buffer =
+ 	  (unsigned long)page_address(image->control_code_page);
+ 
+-	kexec_start_address = image->start;
++	kexec_start_address = (unsigned long) phys_to_virt(image->start);
+ 	kexec_indirection_page =
+ 		(unsigned long) phys_to_virt(image->head & PAGE_MASK);
+ 
diff --git a/target/linux/generic/patches-2.6.31/025-mips_disable_fpu.patch b/target/linux/generic/patches-2.6.31/025-mips_disable_fpu.patch
new file mode 100644
index 0000000000..37d64a95de
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/025-mips_disable_fpu.patch
@@ -0,0 +1,155 @@
+MIPS: allow disabling the kernel FPU emulator
+
+This patch allows turning off the in-kernel Algorithmics
+FPU emulator support, which allows one to save a couple of
+precious blocks on an embedded system.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+--
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -825,6 +825,17 @@ config I8259
+ config MIPS_BONITO64
+ 	bool
+ 
++config MIPS_FPU_EMU
++	bool "Enable FPU emulation"
++	default y
++	help
++	   This option allows building a kernel with or without the Algorithmics
++	   FPU emulator enabled. Turning off this option results in a kernel which
++	   does not catch floating operations exceptions. Make sure that your toolchain
++	   is configured to enable software floating point emulation in that case.
++		
++	   If unsure say Y here.
++
+ config MIPS_MSC
+ 	bool
+ 
+--- a/arch/mips/math-emu/Makefile
++++ b/arch/mips/math-emu/Makefile
+@@ -2,12 +2,14 @@
+ # Makefile for the Linux/MIPS kernel FPU emulation.
+ #
+ 
+-obj-y	:= cp1emu.o ieee754m.o ieee754d.o ieee754dp.o ieee754sp.o ieee754.o \
++obj-y	:=	kernel_linkage.o dsemul.o cp1emu.o
++
++obj-$(CONFIG_MIPS_FPU_EMU)	+= ieee754m.o ieee754d.o ieee754dp.o ieee754sp.o ieee754.o \
+ 	   ieee754xcpt.o dp_frexp.o dp_modf.o dp_div.o dp_mul.o dp_sub.o \
+ 	   dp_add.o dp_fsp.o dp_cmp.o dp_logb.o dp_scalb.o dp_simple.o \
+ 	   dp_tint.o dp_fint.o dp_tlong.o dp_flong.o sp_frexp.o sp_modf.o \
+ 	   sp_div.o sp_mul.o sp_sub.o sp_add.o sp_fdp.o sp_cmp.o sp_logb.o \
+ 	   sp_scalb.o sp_simple.o sp_tint.o sp_fint.o sp_tlong.o sp_flong.o \
+-	   dp_sqrt.o sp_sqrt.o kernel_linkage.o dsemul.o
++	   dp_sqrt.o sp_sqrt.o
+ 
+ EXTRA_CFLAGS += -Werror
+--- a/arch/mips/math-emu/cp1emu.c
++++ b/arch/mips/math-emu/cp1emu.c
+@@ -56,6 +56,12 @@
+ #endif
+ #define __mips 4
+ 
++/* Further private data for which no space exists in mips_fpu_struct */
++
++struct mips_fpu_emulator_stats fpuemustats;
++
++#ifdef CONFIG_MIPS_FPU_EMU
++
+ /* Function which emulates a floating point instruction. */
+ 
+ static int fpu_emu(struct pt_regs *, struct mips_fpu_struct *,
+@@ -66,10 +72,6 @@ static int fpux_emu(struct pt_regs *,
+ 	struct mips_fpu_struct *, mips_instruction);
+ #endif
+ 
+-/* Further private data for which no space exists in mips_fpu_struct */
+-
+-struct mips_fpu_emulator_stats fpuemustats;
+-
+ /* Control registers */
+ 
+ #define FPCREG_RID	0	/* $0  = revision id */
+@@ -1273,6 +1275,13 @@ int fpu_emulator_cop1Handler(struct pt_r
+ 
+ 	return sig;
+ }
++#else
++int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
++        int has_fpu)
++{
++	return 0;
++}
++#endif /* CONFIG_MIPS_FPU_EMU */
+ 
+ #ifdef CONFIG_DEBUG_FS
+ extern struct dentry *mips_debugfs_dir;
+--- a/arch/mips/math-emu/dsemul.c
++++ b/arch/mips/math-emu/dsemul.c
+@@ -109,6 +109,7 @@ int mips_dsemul(struct pt_regs *regs, mi
+ 	return SIGILL;		/* force out of emulation loop */
+ }
+ 
++#ifdef CONFIG_MIPS_FPU_EMU
+ int do_dsemulret(struct pt_regs *xcp)
+ {
+ 	struct emuframe __user *fr;
+@@ -165,3 +166,9 @@ int do_dsemulret(struct pt_regs *xcp)
+ 
+ 	return 1;
+ }
++#else
++int do_dsemulret(struct pt_regs *xcp)
++{
++	return 0;
++}
++#endif /* CONFIG_MIPS_FPU_EMU */
+--- a/arch/mips/math-emu/kernel_linkage.c
++++ b/arch/mips/math-emu/kernel_linkage.c
+@@ -29,6 +29,7 @@
+ 
+ #define SIGNALLING_NAN 0x7ff800007ff80000LL
+ 
++#ifdef CONFIG_MIPS_FPU_EMU
+ void fpu_emulator_init_fpu(void)
+ {
+ 	static int first = 1;
+@@ -112,4 +113,36 @@ int fpu_emulator_restore_context32(struc
+ 
+ 	return err;
+ }
+-#endif
++#endif	/* CONFIG_64BIT */
++#else
++
++void fpu_emulator_init_fpu(void)
++{
++	printk(KERN_INFO "FPU emulator disabled, make sure your toolchain"
++		"was compiled with software floating point support (soft-float)\n");
++	return;
++}
++
++int fpu_emulator_save_context(struct sigcontext __user *sc)
++{
++	return 0;
++}
++
++int fpu_emulator_restore_context(struct sigcontext __user *sc)
++{
++	return 0;
++}
++
++int fpu_emulator_save_context32(struct sigcontext32 __user *sc)
++{
++	return 0;
++}
++
++int fpu_emulator_restore_context32(struct sigcontext32 __user *sc)
++{
++	return 0;
++}
++
++#ifdef CONFIG_64BIT
++#endif	/* CONFIG_64BIT */
++#endif /* CONFIG_MIPS_FPU_EMU */
diff --git a/target/linux/generic/patches-2.6.31/027-mips_module_reloc.patch b/target/linux/generic/patches-2.6.31/027-mips_module_reloc.patch
new file mode 100644
index 0000000000..c0dc64e269
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/027-mips_module_reloc.patch
@@ -0,0 +1,368 @@
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -83,7 +83,7 @@ all-$(CONFIG_BOOT_ELF64)	:= $(vmlinux-64
+ cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe
+ cflags-y			+= -msoft-float
+ LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
+-MODFLAGS			+= -mlong-calls
++MODFLAGS			+= -mno-long-calls
+ 
+ cflags-y += -ffreestanding
+ 
+--- a/arch/mips/include/asm/module.h
++++ b/arch/mips/include/asm/module.h
+@@ -9,6 +9,11 @@ struct mod_arch_specific {
+ 	struct list_head dbe_list;
+ 	const struct exception_table_entry *dbe_start;
+ 	const struct exception_table_entry *dbe_end;
++
++	void *phys_plt_tbl;
++	void *virt_plt_tbl;
++	unsigned int phys_plt_offset;
++	unsigned int virt_plt_offset;
+ };
+ 
+ typedef uint8_t Elf64_Byte;		/* Type for a 8-bit quantity.  */
+--- a/arch/mips/kernel/module.c
++++ b/arch/mips/kernel/module.c
+@@ -43,6 +43,117 @@ static struct mips_hi16 *mips_hi16_list;
+ static LIST_HEAD(dbe_list);
+ static DEFINE_SPINLOCK(dbe_lock);
+ 
++/*
++ * Get the potential max trampolines size required of the init and
++ * non-init sections. Only used if we cannot find enough contiguous
++ * physically mapped memory to put the module into.
++ */
++static unsigned int
++get_plt_size(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
++             const char *secstrings, unsigned int symindex, bool is_init)
++{
++	unsigned long ret = 0;
++	unsigned int i, j;
++	Elf_Sym *syms;
++
++	/* Everything marked ALLOC (this includes the exported symbols) */
++	for (i = 1; i < hdr->e_shnum; ++i) {
++		unsigned int info = sechdrs[i].sh_info;
++
++		if (sechdrs[i].sh_type != SHT_REL
++		    && sechdrs[i].sh_type != SHT_RELA)
++			continue;
++
++		/* Not a valid relocation section? */
++		if (info >= hdr->e_shnum)
++			continue;
++
++		/* Don't bother with non-allocated sections */
++		if (!(sechdrs[info].sh_flags & SHF_ALLOC))
++			continue;
++
++		/* If it's called *.init*, and we're not init, we're
++                   not interested */
++		if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0)
++		    != is_init)
++			continue;
++
++		syms = (Elf_Sym *) sechdrs[symindex].sh_addr;
++		if (sechdrs[i].sh_type == SHT_REL) {
++			Elf_Mips_Rel *rel = (void *) sechdrs[i].sh_addr;
++			unsigned int size = sechdrs[i].sh_size / sizeof(*rel);
++
++			for (j = 0; j < size; ++j) {
++				Elf_Sym *sym;
++
++				if (ELF_MIPS_R_TYPE(rel[j]) != R_MIPS_26)
++					continue;
++
++				sym = syms + ELF_MIPS_R_SYM(rel[j]);
++				if (!is_init && sym->st_shndx != SHN_UNDEF)
++					continue;
++
++				ret += 4 * sizeof(int);
++			}
++		} else {
++			Elf_Mips_Rela *rela = (void *) sechdrs[i].sh_addr;
++			unsigned int size = sechdrs[i].sh_size / sizeof(*rela);
++
++			for (j = 0; j < size; ++j) {
++				Elf_Sym *sym;
++
++				if (ELF_MIPS_R_TYPE(rela[j]) != R_MIPS_26)
++					continue;
++
++				sym = syms + ELF_MIPS_R_SYM(rela[j]);
++				if (!is_init && sym->st_shndx != SHN_UNDEF)
++					continue;
++
++				ret += 4 * sizeof(int);
++			}
++		}
++	}
++
++	return ret;
++}
++
++#ifndef MODULE_START
++static void *alloc_phys(unsigned long size)
++{
++	unsigned order;
++	struct page *page;
++	struct page *p;
++
++	size = PAGE_ALIGN(size);
++	order = get_order(size);
++
++	page = alloc_pages(GFP_KERNEL | __GFP_NORETRY | __GFP_NOWARN |
++			__GFP_THISNODE, order);
++	if (!page)
++		return NULL;
++
++	split_page(page, order);
++
++	for (p = page + (size >> PAGE_SHIFT); p < page + (1 << order); ++p)
++		__free_page(p);
++
++	return page_address(page);
++}
++#endif
++
++static void free_phys(void *ptr, unsigned long size)
++{
++	struct page *page;
++	struct page *end;
++
++	page = virt_to_page(ptr);
++	end = page + (PAGE_ALIGN(size) >> PAGE_SHIFT);
++
++	for (; page < end; ++page)
++		__free_page(page);
++}
++
++
+ void *module_alloc(unsigned long size)
+ {
+ #ifdef MODULE_START
+@@ -58,21 +169,99 @@ void *module_alloc(unsigned long size)
+ 
+ 	return __vmalloc_area(area, GFP_KERNEL, PAGE_KERNEL);
+ #else
++	void *ptr;
++
+ 	if (size == 0)
+ 		return NULL;
+-	return vmalloc(size);
++
++	ptr = alloc_phys(size);
++
++	/* If we failed to allocate physically contiguous memory,
++	 * fall back to regular vmalloc. The module loader code will
++	 * create jump tables to handle long jumps */
++	if (!ptr)
++		return vmalloc(size);
++
++	return ptr;
++#endif
++}
++
++static inline bool is_phys_addr(void *ptr)
++{
++#ifdef CONFIG_64BIT
++	return (KSEGX((unsigned long)ptr) == CKSEG0);
++#else
++	return (KSEGX(ptr) == KSEG0);
+ #endif
+ }
+ 
+ /* Free memory returned from module_alloc */
+ void module_free(struct module *mod, void *module_region)
+ {
+-	vfree(module_region);
++	if (is_phys_addr(module_region)) {
++		if (mod->module_init == module_region)
++			free_phys(module_region, mod->init_size);
++		else if (mod->module_core == module_region)
++			free_phys(module_region, mod->core_size);
++		else
++			BUG();
++	} else {
++		vfree(module_region);
++	}
++}
++
++static void *__module_alloc(int size, bool phys)
++{
++	void *ptr;
++
++	if (phys)
++		ptr = kmalloc(size, GFP_KERNEL);
++	else
++		ptr = vmalloc(size);
++	return ptr;
++}
++
++static void __module_free(void *ptr)
++{
++	if (is_phys_addr(ptr))
++		kfree(ptr);
++	else
++		vfree(ptr);
+ }
+ 
+ int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
+ 			      char *secstrings, struct module *mod)
+ {
++	unsigned int symindex = 0;
++	unsigned int core_size, init_size;
++	int i;
++
++	for (i = 1; i < hdr->e_shnum; i++)
++		if (sechdrs[i].sh_type == SHT_SYMTAB)
++			symindex = i;
++
++	core_size = get_plt_size(hdr, sechdrs, secstrings, symindex, false);
++	init_size = get_plt_size(hdr, sechdrs, secstrings, symindex, true);
++
++	mod->arch.phys_plt_offset = 0;
++	mod->arch.virt_plt_offset = 0;
++	mod->arch.phys_plt_tbl = NULL;
++	mod->arch.virt_plt_tbl = NULL;
++
++	if ((core_size + init_size) == 0)
++		return 0;
++
++	mod->arch.phys_plt_tbl = __module_alloc(core_size + init_size, 1);
++	if (!mod->arch.phys_plt_tbl)
++		return -ENOMEM;
++
++	mod->arch.virt_plt_tbl = __module_alloc(core_size + init_size, 0);
++	if (!mod->arch.virt_plt_tbl) {
++		__module_free(mod->arch.phys_plt_tbl);
++		mod->arch.phys_plt_tbl = NULL;
++		return -ENOMEM;
++	}
++
+ 	return 0;
+ }
+ 
+@@ -95,28 +284,36 @@ static int apply_r_mips_32_rela(struct m
+ 	return 0;
+ }
+ 
+-static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
++static Elf_Addr add_plt_entry_to(unsigned *plt_offset,
++				 void *start, Elf_Addr v)
+ {
+-	if (v % 4) {
+-		pr_err("module %s: dangerous R_MIPS_26 REL relocation\n",
+-		       me->name);
+-		return -ENOEXEC;
+-	}
++	unsigned *tramp = start + *plt_offset;
++	*plt_offset += 4 * sizeof(int);
+ 
+-	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+-		printk(KERN_ERR
+-		       "module %s: relocation overflow\n",
+-		       me->name);
+-		return -ENOEXEC;
+-	}
++	/* adjust carry for addiu */
++	if (v & 0x00008000)
++		v += 0x10000;
+ 
+-	*location = (*location & ~0x03ffffff) |
+-	            ((*location + (v >> 2)) & 0x03ffffff);
++	tramp[0] = 0x3c190000 | (v >> 16);      /* lui t9, hi16 */
++	tramp[1] = 0x27390000 | (v & 0xffff);   /* addiu t9, t9, lo16 */
++	tramp[2] = 0x03200008;                  /* jr t9 */
++	tramp[3] = 0x00000000;                  /* nop */
+ 
+-	return 0;
++	return (Elf_Addr) tramp;
+ }
+ 
+-static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v)
++static Elf_Addr add_plt_entry(struct module *me, void *location, Elf_Addr v)
++{
++	if (is_phys_addr(location))
++		return add_plt_entry_to(&me->arch.phys_plt_offset,
++				me->arch.phys_plt_tbl, v);
++	else
++		return add_plt_entry_to(&me->arch.virt_plt_offset,
++				me->arch.virt_plt_tbl, v);
++
++}
++
++static int set_r_mips_26(struct module *me, u32 *location, u32 ofs, Elf_Addr v)
+ {
+ 	if (v % 4) {
+ 		pr_err("module %s: dangerous R_MIPS_26 RELArelocation\n",
+@@ -125,17 +322,31 @@ static int apply_r_mips_26_rela(struct m
+ 	}
+ 
+ 	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+-		printk(KERN_ERR
++	    v = add_plt_entry(me, location, v + (ofs << 2));
++		if (!v) {
++			printk(KERN_ERR
+ 		       "module %s: relocation overflow\n",
+ 		       me->name);
+-		return -ENOEXEC;
++			return -ENOEXEC;
++		}
++		ofs = 0;
+ 	}
+ 
+-	*location = (*location & ~0x03ffffff) | ((v >> 2) & 0x03ffffff);
++	*location = (*location & ~0x03ffffff) | ((ofs + (v >> 2)) & 0x03ffffff);
+ 
+ 	return 0;
+ }
+ 
++static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
++{
++	return set_r_mips_26(me, location, *location & 0x03ffffff, v);
++}
++
++static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v)
++{
++	return set_r_mips_26(me, location, 0, v);
++}
++
+ static int apply_r_mips_hi16_rel(struct module *me, u32 *location, Elf_Addr v)
+ {
+ 	struct mips_hi16 *n;
+@@ -400,11 +611,32 @@ int module_finalize(const Elf_Ehdr *hdr,
+ 		list_add(&me->arch.dbe_list, &dbe_list);
+ 		spin_unlock_irq(&dbe_lock);
+ 	}
++
++	/* Get rid of the fixup trampoline if we're running the module
++	 * from physically mapped address space */
++	if (me->arch.phys_plt_offset == 0) {
++		__module_free(me->arch.phys_plt_tbl);
++		me->arch.phys_plt_tbl = NULL;
++	}
++	if (me->arch.virt_plt_offset == 0) {
++		__module_free(me->arch.virt_plt_tbl);
++		me->arch.virt_plt_tbl = NULL;
++	}
++
+ 	return 0;
+ }
+ 
+ void module_arch_cleanup(struct module *mod)
+ {
++	if (mod->arch.phys_plt_tbl) {
++		__module_free(mod->arch.phys_plt_tbl);
++		mod->arch.phys_plt_tbl = NULL;
++	}
++	if (mod->arch.virt_plt_tbl) {
++		__module_free(mod->arch.virt_plt_tbl);
++		mod->arch.virt_plt_tbl = NULL;
++	}
++
+ 	spin_lock_irq(&dbe_lock);
+ 	list_del(&mod->arch.dbe_list);
+ 	spin_unlock_irq(&dbe_lock);
diff --git a/target/linux/generic/patches-2.6.31/028-module_exports.patch b/target/linux/generic/patches-2.6.31/028-module_exports.patch
new file mode 100644
index 0000000000..3d73a0212f
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/028-module_exports.patch
@@ -0,0 +1,201 @@
+--- a/include/asm-generic/vmlinux.lds.h
++++ b/include/asm-generic/vmlinux.lds.h
+@@ -55,6 +55,27 @@
+ #define LOAD_OFFSET 0
+ #endif
+ 
++#ifndef SYMTAB_KEEP_STR
++#define SYMTAB_KEEP_STR *(__ksymtab_strings.*)
++#define SYMTAB_DISCARD_STR
++#else
++#define SYMTAB_DISCARD_STR *(__ksymtab_strings.*)
++#endif
++
++#ifndef SYMTAB_KEEP
++#define SYMTAB_KEEP *(__ksymtab.*)
++#define SYMTAB_DISCARD
++#else
++#define SYMTAB_DISCARD *(__ksymtab.*)
++#endif
++
++#ifndef SYMTAB_KEEP_GPL
++#define SYMTAB_KEEP_GPL *(__ksymtab_gpl.*)
++#define SYMTAB_DISCARD_GPL
++#else
++#define SYMTAB_DISCARD_GPL *(__ksymtab_gpl.*)
++#endif
++
+ #ifndef VMLINUX_SYMBOL
+ #define VMLINUX_SYMBOL(_sym_) _sym_
+ #endif
+@@ -256,35 +277,35 @@
+ 	/* Kernel symbol table: Normal symbols */			\
+ 	__ksymtab         : AT(ADDR(__ksymtab) - LOAD_OFFSET) {		\
+ 		VMLINUX_SYMBOL(__start___ksymtab) = .;			\
+-		*(__ksymtab)						\
++		SYMTAB_KEEP						\
+ 		VMLINUX_SYMBOL(__stop___ksymtab) = .;			\
+ 	}								\
+ 									\
+ 	/* Kernel symbol table: GPL-only symbols */			\
+ 	__ksymtab_gpl     : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) {	\
+ 		VMLINUX_SYMBOL(__start___ksymtab_gpl) = .;		\
+-		*(__ksymtab_gpl)					\
++		SYMTAB_KEEP_GPL						\
+ 		VMLINUX_SYMBOL(__stop___ksymtab_gpl) = .;		\
+ 	}								\
+ 									\
+ 	/* Kernel symbol table: Normal unused symbols */		\
+ 	__ksymtab_unused  : AT(ADDR(__ksymtab_unused) - LOAD_OFFSET) {	\
+ 		VMLINUX_SYMBOL(__start___ksymtab_unused) = .;		\
+-		*(__ksymtab_unused)					\
++		*(__ksymtab_unused.*)					\
+ 		VMLINUX_SYMBOL(__stop___ksymtab_unused) = .;		\
+ 	}								\
+ 									\
+ 	/* Kernel symbol table: GPL-only unused symbols */		\
+ 	__ksymtab_unused_gpl : AT(ADDR(__ksymtab_unused_gpl) - LOAD_OFFSET) { \
+ 		VMLINUX_SYMBOL(__start___ksymtab_unused_gpl) = .;	\
+-		*(__ksymtab_unused_gpl)					\
++		*(__ksymtab_unused_gpl.*)				\
+ 		VMLINUX_SYMBOL(__stop___ksymtab_unused_gpl) = .;	\
+ 	}								\
+ 									\
+ 	/* Kernel symbol table: GPL-future-only symbols */		\
+ 	__ksymtab_gpl_future : AT(ADDR(__ksymtab_gpl_future) - LOAD_OFFSET) { \
+ 		VMLINUX_SYMBOL(__start___ksymtab_gpl_future) = .;	\
+-		*(__ksymtab_gpl_future)					\
++		*(__ksymtab_gpl_future.*)				\
+ 		VMLINUX_SYMBOL(__stop___ksymtab_gpl_future) = .;	\
+ 	}								\
+ 									\
+@@ -325,7 +346,13 @@
+ 									\
+ 	/* Kernel symbol table: strings */				\
+         __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) {	\
+-		*(__ksymtab_strings)					\
++		SYMTAB_KEEP_STR						\
++	}								\
++									\
++	/DISCARD/ : {							\
++		SYMTAB_DISCARD						\
++		SYMTAB_DISCARD_GPL					\
++		SYMTAB_DISCARD_STR					\
+ 	}								\
+ 									\
+ 	/* __*init sections */						\
+--- a/include/linux/module.h
++++ b/include/linux/module.h
+@@ -188,16 +188,24 @@ void *__symbol_get_gpl(const char *symbo
+ #define __CRC_SYMBOL(sym, sec)
+ #endif
+ 
++#ifdef MODULE
++#define __EXPORT_SUFFIX(sym)
++#else
++#define __EXPORT_SUFFIX(sym) "." #sym
++#endif
++
+ /* For every exported symbol, place a struct in the __ksymtab section */
+ #define __EXPORT_SYMBOL(sym, sec)				\
+ 	extern typeof(sym) sym;					\
+ 	__CRC_SYMBOL(sym, sec)					\
+ 	static const char __kstrtab_##sym[]			\
+-	__attribute__((section("__ksymtab_strings"), aligned(1))) \
++	__attribute__((section("__ksymtab_strings"		\
++	  __EXPORT_SUFFIX(sym)), aligned(1)))			\
+ 	= MODULE_SYMBOL_PREFIX #sym;                    	\
+ 	static const struct kernel_symbol __ksymtab_##sym	\
+ 	__used							\
+-	__attribute__((section("__ksymtab" sec), unused))	\
++	__attribute__((section("__ksymtab" sec			\
++	  __EXPORT_SUFFIX(sym)), unused))			\
+ 	= { (unsigned long)&sym, __kstrtab_##sym }
+ 
+ #define EXPORT_SYMBOL(sym)					\
+--- a/arch/arm/kernel/vmlinux.lds.S
++++ b/arch/arm/kernel/vmlinux.lds.S
+@@ -79,26 +79,6 @@ SECTIONS
+ #endif
+ 	}
+ 
+-	/DISCARD/ : {			/* Exit code and data		*/
+-		EXIT_TEXT
+-		EXIT_DATA
+-		*(.exitcall.exit)
+-		*(.ARM.exidx.exit.text)
+-		*(.ARM.extab.exit.text)
+-#ifndef CONFIG_HOTPLUG_CPU
+-		*(.ARM.exidx.cpuexit.text)
+-		*(.ARM.extab.cpuexit.text)
+-#endif
+-#ifndef CONFIG_HOTPLUG
+-		*(.ARM.exidx.devexit.text)
+-		*(.ARM.extab.devexit.text)
+-#endif
+-#ifndef CONFIG_MMU
+-		*(.fixup)
+-		*(__ex_table)
+-#endif
+-	}
+-
+ 	.text : {			/* Real text segment		*/
+ 		_text = .;		/* Text and read-only data	*/
+ 			__exception_text_start = .;
+@@ -205,6 +185,28 @@ SECTIONS
+ 		__bss_stop = .;
+ 		_end = .;
+ 	}
++
++	/DISCARD/ : {			/* Exit code and data		*/
++		EXIT_TEXT
++		EXIT_DATA
++		*(.discard)
++		*(.exitcall.exit)
++		*(.ARM.exidx.exit.text)
++		*(.ARM.extab.exit.text)
++#ifndef CONFIG_HOTPLUG_CPU
++		*(.ARM.exidx.cpuexit.text)
++		*(.ARM.extab.cpuexit.text)
++#endif
++#ifndef CONFIG_HOTPLUG
++		*(.ARM.exidx.devexit.text)
++		*(.ARM.extab.devexit.text)
++#endif
++#ifndef CONFIG_MMU
++		*(.fixup)
++		*(__ex_table)
++#endif
++	}
++
+ 					/* Stabs debugging sections.	*/
+ 	.stab 0 : { *(.stab) }
+ 	.stabstr 0 : { *(.stabstr) }
+--- a/arch/powerpc/kernel/vmlinux.lds.S
++++ b/arch/powerpc/kernel/vmlinux.lds.S
+@@ -37,12 +37,6 @@ jiffies = jiffies_64 + 4;
+ #endif
+ SECTIONS
+ {
+-	/* Sections to be discarded. */
+-	/DISCARD/ : {
+-	*(.exitcall.exit)
+-	EXIT_DATA
+-	}
+-
+ 	. = KERNELBASE;
+ 
+ /*
+@@ -295,6 +289,12 @@ SECTIONS
+ 		__bss_stop = .;
+ 	}
+ 
++	/* Sections to be discarded. */
++	/DISCARD/ : {
++	*(.exitcall.exit)
++	EXIT_DATA
++	}
++
+ 	. = ALIGN(PAGE_SIZE);
+ 	_end = . ;
+ 	PROVIDE32 (end = .);
diff --git a/target/linux/generic/patches-2.6.31/029-arm_module_unresolved_weak_sym.patch b/target/linux/generic/patches-2.6.31/029-arm_module_unresolved_weak_sym.patch
new file mode 100644
index 0000000000..42d2dbd202
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/029-arm_module_unresolved_weak_sym.patch
@@ -0,0 +1,13 @@
+--- a/arch/arm/kernel/module.c
++++ b/arch/arm/kernel/module.c
+@@ -120,6 +120,10 @@ apply_relocate(Elf32_Shdr *sechdrs, cons
+ 			return -ENOEXEC;
+ 		}
+ 
++		if ((IS_ERR_VALUE(sym->st_value) || !sym->st_value) &&
++		    ELF_ST_BIND(sym->st_info) == STB_WEAK)
++			continue;
++
+ 		loc = dstsec->sh_addr + rel->r_offset;
+ 
+ 		switch (ELF32_R_TYPE(rel->r_info)) {
diff --git a/target/linux/generic/patches-2.6.31/030-pci_disable_common_quirks.patch b/target/linux/generic/patches-2.6.31/030-pci_disable_common_quirks.patch
new file mode 100644
index 0000000000..c99ff1d495
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/030-pci_disable_common_quirks.patch
@@ -0,0 +1,43 @@
+--- a/drivers/pci/Kconfig
++++ b/drivers/pci/Kconfig
+@@ -51,6 +51,12 @@ config PCI_STUB
+ 
+ 	  When in doubt, say N.
+ 
++config PCI_DISABLE_COMMON_QUIRKS
++	bool "PCI disable common quirks"
++	depends on PCI
++	help
++	  If you don't know what to do here, say N.
++
+ config HT_IRQ
+ 	bool "Interrupts on hypertransport devices"
+ 	default y
+--- a/drivers/pci/quirks.c
++++ b/drivers/pci/quirks.c
+@@ -98,6 +98,7 @@ static void __devinit quirk_resource_ali
+ }
+ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_resource_alignment);
+ 
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
+ /* The Mellanox Tavor device gives false positive parity errors
+  * Mark this device with a broken_parity_status, to allow
+  * PCI scanning code to "skip" this now blacklisted device.
+@@ -1867,7 +1868,9 @@ static void __devinit fixup_rev1_53c810(
+ 	}
+ }
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
++#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
+ 
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
+ /* Enable 1k I/O space granularity on the Intel P64H2 */
+ static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
+ {
+@@ -2498,6 +2501,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x150d, quirk_i82576_sriov);
+ 
+ #endif	/* CONFIG_PCI_IOV */
++#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
+ 
+ static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
+ 			  struct pci_fixup *end)
diff --git a/target/linux/generic/patches-2.6.31/031-ppc_gcc_build_fix.patch b/target/linux/generic/patches-2.6.31/031-ppc_gcc_build_fix.patch
new file mode 100644
index 0000000000..3151eee26e
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/031-ppc_gcc_build_fix.patch
@@ -0,0 +1,226 @@
+GCC 4.4.x looks to be adding support for generating out-of-line register
+saves/restores based on:
+
+http://gcc.gnu.org/ml/gcc-patches/2008-04/msg01678.html
+
+This breaks the kernel build as we'd have to link with libgcc to get the
+implementation of the register save/restores.
+
+To workaround this issue, we just stole the save/restore code from gcc
+and simplified it down for our needs (integer only).  We only do this if
+PPC32 as gcc makes believe the linker on ppc64 will deal with this and
+only if CONFIG_CC_OPTIMIZE_FOR_SIZE is set (thus -Os).
+
+Signed-off-by: Kumar Gala <[EMAIL PROTECTED]>
+---
+
+If someone using cutting edge toolchains for ppc64 could test and make
+sure if we enable CONFIG_CC_OPTIMIZE_FOR_SIZE things work that would be
+nice.
+
+- k
+
+ arch/powerpc/kernel/misc_32.S   |   77 +++++++++++++++++++++++++++
+ arch/powerpc/kernel/ppc_ksyms.c |  111 +++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 188 insertions(+), 0 deletions(-)
+
+--- a/arch/powerpc/kernel/misc_32.S
++++ b/arch/powerpc/kernel/misc_32.S
+@@ -813,3 +813,80 @@ relocate_new_kernel_end:
+ relocate_new_kernel_size:
+ 	.long relocate_new_kernel_end - relocate_new_kernel
+ #endif
++
++#if defined(CONFIG_PPC32) && defined(CONFIG_CC_OPTIMIZE_FOR_SIZE)
++/* Routines for saving integer registers, called by the compiler.  */
++/* Called with r11 pointing to the stack header word of the caller of the */
++/* function, just beyond the end of the integer save area.  */
++
++_GLOBAL(_savegpr_14)   stw     14,-72(11)      /* save gp registers */
++_GLOBAL(_savegpr_15)   stw     15,-68(11)
++_GLOBAL(_savegpr_16)   stw     16,-64(11)
++_GLOBAL(_savegpr_17)   stw     17,-60(11)
++_GLOBAL(_savegpr_18)   stw     18,-56(11)
++_GLOBAL(_savegpr_19)   stw     19,-52(11)
++_GLOBAL(_savegpr_20)   stw     20,-48(11)
++_GLOBAL(_savegpr_21)   stw     21,-44(11)
++_GLOBAL(_savegpr_22)   stw     22,-40(11)
++_GLOBAL(_savegpr_23)   stw     23,-36(11)
++_GLOBAL(_savegpr_24)   stw     24,-32(11)
++_GLOBAL(_savegpr_25)   stw     25,-28(11)
++_GLOBAL(_savegpr_26)   stw     26,-24(11)
++_GLOBAL(_savegpr_27)   stw     27,-20(11)
++_GLOBAL(_savegpr_28)   stw     28,-16(11)
++_GLOBAL(_savegpr_29)   stw     29,-12(11)
++_GLOBAL(_savegpr_30)   stw     30,-8(11)
++_GLOBAL(_savegpr_31)   stw     31,-4(11)
++                       blr
++
++/* Routines for restoring integer registers, called by the compiler.  */
++/* Called with r11 pointing to the stack header word of the caller of the */
++/* function, just beyond the end of the integer restore area.  */
++
++_GLOBAL(_restgpr_14)   lwz     14,-72(11)      /* restore gp registers */
++_GLOBAL(_restgpr_15)   lwz     15,-68(11)
++_GLOBAL(_restgpr_16)   lwz     16,-64(11)
++_GLOBAL(_restgpr_17)   lwz     17,-60(11)
++_GLOBAL(_restgpr_18)   lwz     18,-56(11)
++_GLOBAL(_restgpr_19)   lwz     19,-52(11)
++_GLOBAL(_restgpr_20)   lwz     20,-48(11)
++_GLOBAL(_restgpr_21)   lwz     21,-44(11)
++_GLOBAL(_restgpr_22)   lwz     22,-40(11)
++_GLOBAL(_restgpr_23)   lwz     23,-36(11)
++_GLOBAL(_restgpr_24)   lwz     24,-32(11)
++_GLOBAL(_restgpr_25)   lwz     25,-28(11)
++_GLOBAL(_restgpr_26)   lwz     26,-24(11)
++_GLOBAL(_restgpr_27)   lwz     27,-20(11)
++_GLOBAL(_restgpr_28)   lwz     28,-16(11)
++_GLOBAL(_restgpr_29)   lwz     29,-12(11)
++_GLOBAL(_restgpr_30)   lwz     30,-8(11)
++_GLOBAL(_restgpr_31)   lwz     31,-4(11)
++                       blr
++
++/* Routines for restoring integer registers, called by the compiler.  */
++/* Called with r11 pointing to the stack header word of the caller of the */
++/* function, just beyond the end of the integer restore area.  */
++
++_GLOBAL(_restgpr_14_x) lwz     14,-72(11)      /* restore gp registers */
++_GLOBAL(_restgpr_15_x) lwz     15,-68(11)
++_GLOBAL(_restgpr_16_x) lwz     16,-64(11)
++_GLOBAL(_restgpr_17_x) lwz     17,-60(11)
++_GLOBAL(_restgpr_18_x) lwz     18,-56(11)
++_GLOBAL(_restgpr_19_x) lwz     19,-52(11)
++_GLOBAL(_restgpr_20_x) lwz     20,-48(11)
++_GLOBAL(_restgpr_21_x) lwz     21,-44(11)
++_GLOBAL(_restgpr_22_x) lwz     22,-40(11)
++_GLOBAL(_restgpr_23_x) lwz     23,-36(11)
++_GLOBAL(_restgpr_24_x) lwz     24,-32(11)
++_GLOBAL(_restgpr_25_x) lwz     25,-28(11)
++_GLOBAL(_restgpr_26_x) lwz     26,-24(11)
++_GLOBAL(_restgpr_27_x) lwz     27,-20(11)
++_GLOBAL(_restgpr_28_x) lwz     28,-16(11)
++_GLOBAL(_restgpr_29_x) lwz     29,-12(11)
++_GLOBAL(_restgpr_30_x) lwz     30,-8(11)
++_GLOBAL(_restgpr_31_x) lwz     0,4(11)
++                       lwz     31,-4(11)
++                       mtlr    0
++                       mr      1,11
++                       blr
++#endif
+--- a/arch/powerpc/kernel/ppc_ksyms.c
++++ b/arch/powerpc/kernel/ppc_ksyms.c
+@@ -188,3 +188,114 @@ EXPORT_SYMBOL(__mtdcr);
+ EXPORT_SYMBOL(__mfdcr);
+ #endif
+ EXPORT_SYMBOL(empty_zero_page);
++
++#if defined(CONFIG_PPC32) && defined(CONFIG_CC_OPTIMIZE_FOR_SIZE)
++void _savegpr_14(void);
++void _savegpr_15(void);
++void _savegpr_16(void);
++void _savegpr_17(void);
++void _savegpr_18(void);
++void _savegpr_19(void);
++void _savegpr_20(void);
++void _savegpr_21(void);
++void _savegpr_22(void);
++void _savegpr_23(void);
++void _savegpr_24(void);
++void _savegpr_25(void);
++void _savegpr_26(void);
++void _savegpr_27(void);
++void _savegpr_28(void);
++void _savegpr_29(void);
++void _savegpr_30(void);
++void _savegpr_31(void);
++void _restgpr_14(void);
++void _restgpr_15(void);
++void _restgpr_16(void);
++void _restgpr_17(void);
++void _restgpr_18(void);
++void _restgpr_19(void);
++void _restgpr_20(void);
++void _restgpr_21(void);
++void _restgpr_22(void);
++void _restgpr_23(void);
++void _restgpr_24(void);
++void _restgpr_25(void);
++void _restgpr_26(void);
++void _restgpr_27(void);
++void _restgpr_28(void);
++void _restgpr_29(void);
++void _restgpr_30(void);
++void _restgpr_31(void);
++void _restgpr_14_x(void);
++void _restgpr_15_x(void);
++void _restgpr_16_x(void);
++void _restgpr_17_x(void);
++void _restgpr_18_x(void);
++void _restgpr_19_x(void);
++void _restgpr_20_x(void);
++void _restgpr_21_x(void);
++void _restgpr_22_x(void);
++void _restgpr_23_x(void);
++void _restgpr_24_x(void);
++void _restgpr_25_x(void);
++void _restgpr_26_x(void);
++void _restgpr_27_x(void);
++void _restgpr_28_x(void);
++void _restgpr_29_x(void);
++void _restgpr_30_x(void);
++void _restgpr_31_x(void);
++EXPORT_SYMBOL(_savegpr_14);
++EXPORT_SYMBOL(_savegpr_15);
++EXPORT_SYMBOL(_savegpr_16);
++EXPORT_SYMBOL(_savegpr_17);
++EXPORT_SYMBOL(_savegpr_18);
++EXPORT_SYMBOL(_savegpr_19);
++EXPORT_SYMBOL(_savegpr_20);
++EXPORT_SYMBOL(_savegpr_21);
++EXPORT_SYMBOL(_savegpr_22);
++EXPORT_SYMBOL(_savegpr_23);
++EXPORT_SYMBOL(_savegpr_24);
++EXPORT_SYMBOL(_savegpr_25);
++EXPORT_SYMBOL(_savegpr_26);
++EXPORT_SYMBOL(_savegpr_27);
++EXPORT_SYMBOL(_savegpr_28);
++EXPORT_SYMBOL(_savegpr_29);
++EXPORT_SYMBOL(_savegpr_30);
++EXPORT_SYMBOL(_savegpr_31);
++EXPORT_SYMBOL(_restgpr_14);
++EXPORT_SYMBOL(_restgpr_15);
++EXPORT_SYMBOL(_restgpr_16);
++EXPORT_SYMBOL(_restgpr_17);
++EXPORT_SYMBOL(_restgpr_18);
++EXPORT_SYMBOL(_restgpr_19);
++EXPORT_SYMBOL(_restgpr_20);
++EXPORT_SYMBOL(_restgpr_21);
++EXPORT_SYMBOL(_restgpr_22);
++EXPORT_SYMBOL(_restgpr_23);
++EXPORT_SYMBOL(_restgpr_24);
++EXPORT_SYMBOL(_restgpr_25);
++EXPORT_SYMBOL(_restgpr_26);
++EXPORT_SYMBOL(_restgpr_27);
++EXPORT_SYMBOL(_restgpr_28);
++EXPORT_SYMBOL(_restgpr_29);
++EXPORT_SYMBOL(_restgpr_30);
++EXPORT_SYMBOL(_restgpr_31);
++EXPORT_SYMBOL(_restgpr_14_x);
++EXPORT_SYMBOL(_restgpr_15_x);
++EXPORT_SYMBOL(_restgpr_16_x);
++EXPORT_SYMBOL(_restgpr_17_x);
++EXPORT_SYMBOL(_restgpr_18_x);
++EXPORT_SYMBOL(_restgpr_19_x);
++EXPORT_SYMBOL(_restgpr_20_x);
++EXPORT_SYMBOL(_restgpr_21_x);
++EXPORT_SYMBOL(_restgpr_22_x);
++EXPORT_SYMBOL(_restgpr_23_x);
++EXPORT_SYMBOL(_restgpr_24_x);
++EXPORT_SYMBOL(_restgpr_25_x);
++EXPORT_SYMBOL(_restgpr_26_x);
++EXPORT_SYMBOL(_restgpr_27_x);
++EXPORT_SYMBOL(_restgpr_28_x);
++EXPORT_SYMBOL(_restgpr_29_x);
++EXPORT_SYMBOL(_restgpr_30_x);
++EXPORT_SYMBOL(_restgpr_31_x);
++#endif /* CONFIG_PPC32 && CONFIG_CC_OPTIMIZE_FOR_SIZE */
diff --git a/target/linux/generic/patches-2.6.31/032-mips_vmlinux_lds.patch b/target/linux/generic/patches-2.6.31/032-mips_vmlinux_lds.patch
new file mode 100644
index 0000000000..807a9444f4
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/032-mips_vmlinux_lds.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/kernel/Makefile
++++ b/arch/mips/kernel/Makefile
+@@ -4,6 +4,8 @@
+ 
+ CPPFLAGS_vmlinux.lds := $(KBUILD_CFLAGS)
+ 
++CPPFLAGS_vmlinux.lds := $(KBUILD_CFLAGS) $(EXTRA_LDSFLAGS)
++
+ extra-y		:= head.o init_task.o vmlinux.lds
+ 
+ obj-y		+= cpu-probe.o branch.o entry.o genex.o irq.o process.o \
diff --git a/target/linux/generic/patches-2.6.31/049-byteshift_h_fix_usage_for_compressed_kernels.patch b/target/linux/generic/patches-2.6.31/049-byteshift_h_fix_usage_for_compressed_kernels.patch
new file mode 100644
index 0000000000..5cd81070e1
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/049-byteshift_h_fix_usage_for_compressed_kernels.patch
@@ -0,0 +1,72 @@
+From 2fa4341074cd02fb39aa23410740764948755635 Mon Sep 17 00:00:00 2001
+From: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+Date: Wed, 23 Sep 2009 15:57:38 -0700
+Subject: [PATCH] include/linux/unaligned/{l,b}e_byteshift.h: fix usage for compressed kernels
+
+When unaligned accesses are required for uncompressing a kernel (such as
+for LZO decompression on ARM in a patch that follows), including
+<linux/kernel.h> causes issues as it brings in a lot of things that are
+not available in the decompression environment.
+
+linux/kernel.h brings at least:
+extern int console_printk[];
+extern const char hex_asc[];
+which causes errors at link-time as they are not available when
+compiling the pre-boot environement. There are also a few others:
+
+  arch/arm/boot/compressed/misc.o: In function `valid_user_regs':
+   arch/arm/include/asm/ptrace.h:158: undefined reference to `elf_hwcap'
+  arch/arm/boot/compressed/misc.o: In function `console_silent':
+   include/linux/kernel.h:292: undefined reference to `console_printk'
+  arch/arm/boot/compressed/misc.o: In function `console_verbose':
+   include/linux/kernel.h:297: undefined reference to `console_printk'
+  arch/arm/boot/compressed/misc.o: In function `pack_hex_byte':
+   include/linux/kernel.h:360: undefined reference to `hex_asc'
+  arch/arm/boot/compressed/misc.o: In function `hweight_long':
+   include/linux/bitops.h:45: undefined reference to `hweight32'
+  arch/arm/boot/compressed/misc.o: In function `__cmpxchg_local_generic':
+   include/asm-generic/cmpxchg-local.h:21: undefined reference to `wrong_size_cmpxchg'
+   include/asm-generic/cmpxchg-local.h:42: undefined reference to `wrong_size_cmpxchg'
+  arch/arm/boot/compressed/misc.o: In function `__xchg':
+   arch/arm/include/asm/system.h:309: undefined reference to `__bad_xchg'
+
+However, those files apparently use nothing from <linux/kernel.h>, all
+they need is the declaration of types such as u32 or u64, so
+<linux/types.h> should be enough
+
+Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+Cc: Sam Ravnborg <sam@ravnborg.org>
+Cc: Russell King <rmk@arm.linux.org.uk>
+Cc: Ingo Molnar <mingo@elte.hu>
+Cc: Thomas Gleixner <tglx@linutronix.de>
+Cc: "H. Peter Anvin" <hpa@zytor.com>
+Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
+Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
+Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
+---
+ include/linux/unaligned/be_byteshift.h |    2 +-
+ include/linux/unaligned/le_byteshift.h |    2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+--- a/include/linux/unaligned/be_byteshift.h
++++ b/include/linux/unaligned/be_byteshift.h
+@@ -1,7 +1,7 @@
+ #ifndef _LINUX_UNALIGNED_BE_BYTESHIFT_H
+ #define _LINUX_UNALIGNED_BE_BYTESHIFT_H
+ 
+-#include <linux/kernel.h>
++#include <linux/types.h>
+ 
+ static inline u16 __get_unaligned_be16(const u8 *p)
+ {
+--- a/include/linux/unaligned/le_byteshift.h
++++ b/include/linux/unaligned/le_byteshift.h
+@@ -1,7 +1,7 @@
+ #ifndef _LINUX_UNALIGNED_LE_BYTESHIFT_H
+ #define _LINUX_UNALIGNED_LE_BYTESHIFT_H
+ 
+-#include <linux/kernel.h>
++#include <linux/types.h>
+ 
+ static inline u16 __get_unaligned_le16(const u8 *p)
+ {
diff --git a/target/linux/generic/patches-2.6.31/050-lzo_compressed_kernels.patch b/target/linux/generic/patches-2.6.31/050-lzo_compressed_kernels.patch
new file mode 100644
index 0000000000..733d1756f6
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/050-lzo_compressed_kernels.patch
@@ -0,0 +1,309 @@
+--- /dev/null
++++ b/include/linux/decompress/unlzo.h
+@@ -0,0 +1,10 @@
++#ifndef DECOMPRESS_UNLZO_H
++#define DECOMPRESS_UNLZO_H
++
++int unlzo(unsigned char *inbuf, int len,
++	int(*fill)(void*, unsigned int),
++	int(*flush)(void*, unsigned int),
++	unsigned char *output,
++	int *pos,
++	void(*error)(char *x));
++#endif
+--- a/init/Kconfig
++++ b/init/Kconfig
+@@ -115,10 +115,13 @@ config HAVE_KERNEL_BZIP2
+ config HAVE_KERNEL_LZMA
+ 	bool
+ 
++config HAVE_KERNEL_LZO
++	bool
++
+ choice
+ 	prompt "Kernel compression mode"
+ 	default KERNEL_GZIP
+-	depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA
++	depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA || HAVE_KERNEL_LZO
+ 	help
+ 	  The linux kernel is a kind of self-extracting executable.
+ 	  Several compression algorithms are available, which differ
+@@ -141,9 +144,8 @@ config KERNEL_GZIP
+ 	bool "Gzip"
+ 	depends on HAVE_KERNEL_GZIP
+ 	help
+-	  The old and tried gzip compression. Its compression ratio is
+-	  the poorest among the 3 choices; however its speed (both
+-	  compression and decompression) is the fastest.
++	  The old and tried gzip compression. It provides a good balance
++	  between compression ratio and decompression speed.
+ 
+ config KERNEL_BZIP2
+ 	bool "Bzip2"
+@@ -164,6 +166,14 @@ config KERNEL_LZMA
+ 	  two. Compression is slowest.	The kernel size is about 33%
+ 	  smaller with LZMA in comparison to gzip.
+ 
++config KERNEL_LZO
++	bool "LZO"
++	depends on HAVE_KERNEL_LZO
++	help
++	  Its compression ratio is the poorest among the 4. The kernel
++	  size is about about 10% bigger than gzip; however its speed
++	  (both compression and decompression) is the fastest.
++
+ endchoice
+ 
+ config SWAP
+--- /dev/null
++++ b/lib/decompress_unlzo.c
+@@ -0,0 +1,208 @@
++/*
++ * LZO decompressor for the Linux kernel. Code borrowed from the lzo
++ * implementation by Markus Franz Xaver Johannes Oberhumer.
++ *
++ * Linux kernel adaptation:
++ * Copyright (C) 2009
++ * Albin Tonnerre, Free Electrons <albin.tonnerre@free-electrons.com>
++ *
++ * Original code:
++ * Copyright (C) 1996-2005 Markus Franz Xaver Johannes Oberhumer
++ * All Rights Reserved.
++ *
++ * lzop and the LZO library are free software; you can redistribute them
++ * and/or modify them under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; see the file COPYING.
++ * If not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * Markus F.X.J. Oberhumer
++ * <markus@oberhumer.com>
++ * http://www.oberhumer.com/opensource/lzop/
++ */
++
++#ifdef STATIC
++#include "lzo/lzo1x_decompress.c"
++#else
++#include <linux/slab.h>
++#include <linux/decompress/unlzo.h>
++#endif
++
++#include <linux/types.h>
++#include <linux/lzo.h>
++#include <linux/decompress/mm.h>
++
++#include <linux/compiler.h>
++#include <asm/unaligned.h>
++
++static const unsigned char lzop_magic[] =
++	{ 0x89, 0x4c, 0x5a, 0x4f, 0x00, 0x0d, 0x0a, 0x1a, 0x0a };
++
++#define LZO_BLOCK_SIZE        (256*1024l)
++#define HEADER_HAS_FILTER      0x00000800L
++
++STATIC inline int INIT parse_header(u8 *input, u8 *skip)
++{
++	int l;
++	u8 *parse = input;
++	u8 level = 0;
++	u16 version;
++
++	/* read magic: 9 first bits */
++	for (l = 0; l < 9; l++) {
++		if (*parse++ != lzop_magic[l])
++			return 0;
++	}
++	/* get version (2bytes), skip library version (2),
++	 * 'need to be extracted' version (2) and
++	 * method (1) */
++	version = get_unaligned_be16(parse);
++	parse += 7;
++	if (version >= 0x0940)
++		level = *parse++;
++	if (get_unaligned_be32(parse) & HEADER_HAS_FILTER)
++		parse += 8; /* flags + filter info */
++	else
++		parse += 4; /* flags */
++
++	/* skip mode and mtime_low */
++	parse += 8;
++	if (version >= 0x0940)
++		parse += 4;	/* skip mtime_high */
++
++	l = *parse++;
++	/* don't care about the file name, and skip checksum */
++	parse += l + 4;
++
++	*skip = parse - input;
++	return 1;
++}
++
++STATIC inline int INIT unlzo(u8 *input, int in_len,
++				int (*fill) (void *, unsigned int),
++				int (*flush) (void *, unsigned int),
++				u8 *output, int *posp,
++				void (*error_fn) (char *x))
++{
++	u8 skip = 0, r = 0;
++	u32 src_len, dst_len;
++	size_t tmp;
++	u8 *in_buf, *in_buf_save, *out_buf;
++	int obytes_processed = 0;
++
++	set_error_fn(error_fn);
++
++	if (output)
++		out_buf = output;
++	else if (!flush) {
++		error("NULL output pointer and no flush function provided");
++		goto exit;
++	} else {
++		out_buf = malloc(LZO_BLOCK_SIZE);
++		if (!out_buf) {
++			error("Could not allocate output buffer");
++			goto exit;
++		}
++	}
++
++	if (input && fill) {
++		error("Both input pointer and fill function provided, don't know what to do");
++		goto exit_1;
++	} else if (input)
++		in_buf = input;
++	else if (!fill || !posp) {
++		error("NULL input pointer and missing position pointer or fill function");
++		goto exit_1;
++	} else {
++		in_buf = malloc(lzo1x_worst_compress(LZO_BLOCK_SIZE));
++		if (!in_buf) {
++			error("Could not allocate input buffer");
++			goto exit_1;
++		}
++	}
++	in_buf_save = in_buf;
++
++	if (posp)
++		*posp = 0;
++
++	if (fill)
++		fill(in_buf, lzo1x_worst_compress(LZO_BLOCK_SIZE));
++
++	if (!parse_header(input, &skip)) {
++		error("invalid header");
++		goto exit_2;
++	}
++	in_buf += skip;
++
++	if (posp)
++		*posp = skip;
++
++	for (;;) {
++		/* read uncompressed block size */
++		dst_len = get_unaligned_be32(in_buf);
++		in_buf += 4;
++
++		/* exit if last block */
++		if (dst_len == 0) {
++			if (posp)
++				*posp += 4;
++			break;
++		}
++
++		if (dst_len > LZO_BLOCK_SIZE) {
++			error("dest len longer than block size");
++			goto exit_2;
++		}
++
++		/* read compressed block size, and skip block checksum info */
++		src_len = get_unaligned_be32(in_buf);
++		in_buf += 8;
++
++		if (src_len <= 0 || src_len > dst_len) {
++			error("file corrupted");
++			goto exit_2;
++		}
++
++		/* decompress */
++		tmp = dst_len;
++		r = lzo1x_decompress_safe((u8 *) in_buf, src_len, out_buf, &tmp);
++
++		if (r != LZO_E_OK || dst_len != tmp) {
++			error("Compressed data violation");
++			goto exit_2;
++		}
++
++		obytes_processed += dst_len;
++		if (flush)
++			flush(out_buf, dst_len);
++		if (output)
++			out_buf += dst_len;
++		if (posp)
++			*posp += src_len + 12;
++		if (fill) {
++			in_buf = in_buf_save;
++			fill(in_buf, lzo1x_worst_compress(LZO_BLOCK_SIZE));
++		} else
++			in_buf += src_len;
++	}
++
++exit_2:
++	if (!input)
++		free(in_buf);
++exit_1:
++	if (!output)
++		free(out_buf);
++exit:
++	return obytes_processed;
++}
++
++#define decompress unlzo
+--- a/lib/lzo/lzo1x_decompress.c
++++ b/lib/lzo/lzo1x_decompress.c
+@@ -11,11 +11,13 @@
+  *  Richard Purdie <rpurdie@openedhand.com>
+  */
+ 
++#ifndef STATIC
+ #include <linux/module.h>
+ #include <linux/kernel.h>
+-#include <linux/lzo.h>
+-#include <asm/byteorder.h>
++#endif
++
+ #include <asm/unaligned.h>
++#include <linux/lzo.h>
+ #include "lzodefs.h"
+ 
+ #define HAVE_IP(x, ip_end, ip) ((size_t)(ip_end - ip) < (x))
+@@ -244,9 +246,10 @@ lookbehind_overrun:
+ 	*out_len = op - out;
+ 	return LZO_E_LOOKBEHIND_OVERRUN;
+ }
+-
++#ifndef STATIC
+ EXPORT_SYMBOL_GPL(lzo1x_decompress_safe);
+ 
+ MODULE_LICENSE("GPL");
+ MODULE_DESCRIPTION("LZO1X Decompressor");
+ 
++#endif
+--- a/scripts/Makefile.lib
++++ b/scripts/Makefile.lib
+@@ -230,3 +230,8 @@ quiet_cmd_lzma = LZMA    $@
+ cmd_lzma = (cat $(filter-out FORCE,$^) | \
+ 	lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ 	(rm -f $@ ; false)
++
++quiet_cmd_lzo = LZO    $@
++cmd_lzo = (cat $(filter-out FORCE,$^) | \
++	lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
++	(rm -f $@ ; false)
diff --git a/target/linux/generic/patches-2.6.31/051-lzo_compressed_kernel_for_arm.patch b/target/linux/generic/patches-2.6.31/051-lzo_compressed_kernel_for_arm.patch
new file mode 100644
index 0000000000..49512bb41d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/051-lzo_compressed_kernel_for_arm.patch
@@ -0,0 +1,283 @@
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -18,6 +18,8 @@ config ARM
+ 	select HAVE_KRETPROBES if (HAVE_KPROBES)
+ 	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
+ 	select HAVE_GENERIC_DMA_COHERENT
++	select HAVE_KERNEL_GZIP
++	select HAVE_KERNEL_LZO
+ 	help
+ 	  The ARM series is a line of low-power-consumption RISC chip designs
+ 	  licensed by ARM Ltd and targeted at embedded applications and
+--- a/arch/arm/boot/compressed/Makefile
++++ b/arch/arm/boot/compressed/Makefile
+@@ -63,8 +63,12 @@ endif
+ 
+ SEDFLAGS	= s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
+ 
+-targets       := vmlinux vmlinux.lds piggy.gz piggy.o font.o font.c \
+-		 head.o misc.o $(OBJS)
++suffix_$(CONFIG_KERNEL_GZIP) = gzip
++suffix_$(CONFIG_KERNEL_LZO)  = lzo
++
++targets       := vmlinux vmlinux.lds \
++		 piggy.$(suffix_y) piggy.$(suffix_y).o \
++		 font.o font.c head.o misc.o $(OBJS)
+ 
+ ifeq ($(CONFIG_FUNCTION_TRACER),y)
+ ORIG_CFLAGS := $(KBUILD_CFLAGS)
+@@ -87,22 +91,31 @@ endif
+ ifneq ($(PARAMS_PHYS),)
+ LDFLAGS_vmlinux += --defsym params_phys=$(PARAMS_PHYS)
+ endif
+-LDFLAGS_vmlinux += -p --no-undefined -X \
+-	$(shell $(CC) $(KBUILD_CFLAGS) --print-libgcc-file-name) -T
++# ?
++LDFLAGS_vmlinux += -p
++# Report unresolved symbol references
++LDFLAGS_vmlinux += --no-undefined
++# Delete all temporary local symbols
++LDFLAGS_vmlinux += -X
++# Next argument is a linker script
++LDFLAGS_vmlinux += -T
++
++# For __aeabi_uidivmod
++lib1funcs = $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.o
+ 
+ # Don't allow any static data in misc.o, which
+ # would otherwise mess up our GOT table
+ CFLAGS_misc.o := -Dstatic=
+ 
+-$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.o \
+-	 	$(addprefix $(obj)/, $(OBJS)) FORCE
++$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
++	 	$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) FORCE
+ 	$(call if_changed,ld)
+ 	@:
+ 
+-$(obj)/piggy.gz: $(obj)/../Image FORCE
+-	$(call if_changed,gzip)
++$(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE
++	$(call if_changed,$(suffix_y))
+ 
+-$(obj)/piggy.o:  $(obj)/piggy.gz FORCE
++$(obj)/piggy.$(suffix_y).o:  $(obj)/piggy.$(suffix_y) FORCE
+ 
+ CFLAGS_font.o := -Dstatic=
+ 
+--- a/arch/arm/boot/compressed/misc.c
++++ b/arch/arm/boot/compressed/misc.c
+@@ -18,10 +18,15 @@
+ 
+ unsigned int __machine_arch_type;
+ 
++#define _LINUX_STRING_H_
++
+ #include <linux/compiler.h>	/* for inline */
+ #include <linux/types.h>	/* for size_t */
+ #include <linux/stddef.h>	/* for NULL */
+ #include <asm/string.h>
++#include <linux/linkage.h>
++
++#include <asm/unaligned.h>
+ 
+ #ifdef STANDALONE_DEBUG
+ #define putstr printf
+@@ -188,34 +193,8 @@ static inline __ptr_t memcpy(__ptr_t __d
+ /*
+  * gzip delarations
+  */
+-#define OF(args)  args
+ #define STATIC static
+ 
+-typedef unsigned char  uch;
+-typedef unsigned short ush;
+-typedef unsigned long  ulg;
+-
+-#define WSIZE 0x8000		/* Window size must be at least 32k, */
+-				/* and a power of two */
+-
+-static uch *inbuf;		/* input buffer */
+-static uch window[WSIZE];	/* Sliding window buffer */
+-
+-static unsigned insize;		/* valid bytes in inbuf */
+-static unsigned inptr;		/* index of next byte to be processed in inbuf */
+-static unsigned outcnt;		/* bytes in output buffer */
+-
+-/* gzip flag byte */
+-#define ASCII_FLAG   0x01 /* bit 0 set: file probably ascii text */
+-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
+-#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
+-#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
+-#define COMMENT      0x10 /* bit 4 set: file comment present */
+-#define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
+-#define RESERVED     0xC0 /* bit 6,7:   reserved */
+-
+-#define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf())
+-
+ /* Diagnostic functions */
+ #ifdef DEBUG
+ #  define Assert(cond,msg) {if(!(cond)) error(msg);}
+@@ -233,24 +212,20 @@ static unsigned outcnt;		/* bytes in out
+ #  define Tracecv(c,x)
+ #endif
+ 
+-static int  fill_inbuf(void);
+-static void flush_window(void);
+ static void error(char *m);
+ 
+ extern char input_data[];
+ extern char input_data_end[];
+ 
+-static uch *output_data;
+-static ulg output_ptr;
+-static ulg bytes_out;
++static unsigned char *output_data;
++static unsigned long output_ptr;
+ 
+ static void error(char *m);
+ 
+ static void putstr(const char *);
+ 
+-extern int end;
+-static ulg free_mem_ptr;
+-static ulg free_mem_end_ptr;
++static unsigned long free_mem_ptr;
++static unsigned long free_mem_end_ptr;
+ 
+ #ifdef STANDALONE_DEBUG
+ #define NO_INFLATE_MALLOC
+@@ -258,46 +233,13 @@ static ulg free_mem_end_ptr;
+ 
+ #define ARCH_HAS_DECOMP_WDOG
+ 
+-#include "../../../../lib/inflate.c"
+-
+-/* ===========================================================================
+- * Fill the input buffer. This is called only when the buffer is empty
+- * and at least one byte is really needed.
+- */
+-int fill_inbuf(void)
+-{
+-	if (insize != 0)
+-		error("ran out of input data");
+-
+-	inbuf = input_data;
+-	insize = &input_data_end[0] - &input_data[0];
+-
+-	inptr = 1;
+-	return inbuf[0];
+-}
++#ifdef CONFIG_KERNEL_GZIP
++#include "../../../../lib/decompress_inflate.c"
++#endif
+ 
+-/* ===========================================================================
+- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
+- * (Used for the decompressed data only.)
+- */
+-void flush_window(void)
+-{
+-	ulg c = crc;
+-	unsigned n;
+-	uch *in, *out, ch;
+-
+-	in = window;
+-	out = &output_data[output_ptr];
+-	for (n = 0; n < outcnt; n++) {
+-		ch = *out++ = *in++;
+-		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+-	}
+-	crc = c;
+-	bytes_out += (ulg)outcnt;
+-	output_ptr += (ulg)outcnt;
+-	outcnt = 0;
+-	putstr(".");
+-}
++#ifdef CONFIG_KERNEL_LZO
++#include "../../../../lib/decompress_unlzo.c"
++#endif
+ 
+ #ifndef arch_error
+ #define arch_error(x)
+@@ -314,22 +256,33 @@ static void error(char *x)
+ 	while(1);	/* Halt */
+ }
+ 
++asmlinkage void __div0(void)
++{
++	error("Attempting division by 0!");
++}
++
+ #ifndef STANDALONE_DEBUG
+ 
+-ulg
+-decompress_kernel(ulg output_start, ulg free_mem_ptr_p, ulg free_mem_ptr_end_p,
+-		  int arch_id)
++unsigned long
++decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
++		unsigned long free_mem_ptr_end_p,
++		int arch_id)
+ {
+-	output_data		= (uch *)output_start;	/* Points to kernel start */
++	unsigned char *tmp;
++
++	output_data		= (unsigned char *)output_start;
+ 	free_mem_ptr		= free_mem_ptr_p;
+ 	free_mem_end_ptr	= free_mem_ptr_end_p;
+ 	__machine_arch_type	= arch_id;
+ 
+ 	arch_decomp_setup();
+ 
+-	makecrc();
++	tmp = (unsigned char *) (((unsigned long)input_data_end) - 4);
++	output_ptr = get_unaligned_le32(tmp);
++
+ 	putstr("Uncompressing Linux...");
+-	gunzip();
++	decompress(input_data, input_data_end - input_data,
++			NULL, NULL, output_data, NULL, error);
+ 	putstr(" done, booting the kernel.\n");
+ 	return output_ptr;
+ }
+@@ -341,11 +294,10 @@ int main()
+ {
+ 	output_data = output_buffer;
+ 
+-	makecrc();
+ 	putstr("Uncompressing Linux...");
+-	gunzip();
++	decompress(input_data, input_data_end - input_data,
++			NULL, NULL, output_data, NULL, error);
+ 	putstr("done.\n");
+ 	return 0;
+ }
+ #endif
+-	
+--- a/arch/arm/boot/compressed/piggy.S
++++ /dev/null
+@@ -1,6 +0,0 @@
+-	.section .piggydata,#alloc
+-	.globl	input_data
+-input_data:
+-	.incbin	"arch/arm/boot/compressed/piggy.gz"
+-	.globl	input_data_end
+-input_data_end:
+--- /dev/null
++++ b/arch/arm/boot/compressed/piggy.gzip.S
+@@ -0,0 +1,6 @@
++	.section .piggydata,#alloc
++	.globl	input_data
++input_data:
++	.incbin	"arch/arm/boot/compressed/piggy.gzip"
++	.globl	input_data_end
++input_data_end:
+--- /dev/null
++++ b/arch/arm/boot/compressed/piggy.lzo.S
+@@ -0,0 +1,6 @@
++	.section .piggydata,#alloc
++	.globl	input_data
++input_data:
++	.incbin	"arch/arm/boot/compressed/piggy.lzo"
++	.globl	input_data_end
++input_data_end:
diff --git a/target/linux/generic/patches-2.6.31/052-lzo_compressed_kernel_for_x86.patch b/target/linux/generic/patches-2.6.31/052-lzo_compressed_kernel_for_x86.patch
new file mode 100644
index 0000000000..ea7d2400ba
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/052-lzo_compressed_kernel_for_x86.patch
@@ -0,0 +1,48 @@
+--- a/arch/x86/Kconfig
++++ b/arch/x86/Kconfig
+@@ -49,6 +49,7 @@ config X86
+ 	select HAVE_KERNEL_GZIP
+ 	select HAVE_KERNEL_BZIP2
+ 	select HAVE_KERNEL_LZMA
++	select HAVE_KERNEL_LZO
+ 	select HAVE_ARCH_KMEMCHECK
+ 
+ config OUTPUT_FORMAT
+--- a/arch/x86/boot/compressed/Makefile
++++ b/arch/x86/boot/compressed/Makefile
+@@ -4,7 +4,7 @@
+ # create a compressed vmlinux image from the original vmlinux
+ #
+ 
+-targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma head_$(BITS).o misc.o piggy.o
++targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.lzo head_$(BITS).o misc.o piggy.o
+ 
+ KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
+ KBUILD_CFLAGS += -fno-strict-aliasing -fPIC
+@@ -48,10 +48,13 @@ $(obj)/vmlinux.bin.bz2: $(vmlinux.bin.al
+ 	$(call if_changed,bzip2)
+ $(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE
+ 	$(call if_changed,lzma)
++$(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y) FORCE
++	$(call if_changed,lzo)
+ 
+ suffix-$(CONFIG_KERNEL_GZIP)	:= gz
+ suffix-$(CONFIG_KERNEL_BZIP2)	:= bz2
+ suffix-$(CONFIG_KERNEL_LZMA)	:= lzma
++suffix-$(CONFIG_KERNEL_LZO) 	:= lzo
+ 
+ quiet_cmd_mkpiggy = MKPIGGY $@
+       cmd_mkpiggy = $(obj)/mkpiggy $< > $@ || ( rm -f $@ ; false )
+--- a/arch/x86/boot/compressed/misc.c
++++ b/arch/x86/boot/compressed/misc.c
+@@ -162,6 +162,10 @@ static int lines, cols;
+ #include "../../../../lib/decompress_unlzma.c"
+ #endif
+ 
++#ifdef CONFIG_KERNEL_LZO
++#include "../../../../lib/decompress_unlzo.c"
++#endif
++
+ static void scroll(void)
+ {
+ 	int i;
diff --git a/target/linux/generic/patches-2.6.31/053-lzo_compression_for_initramfs.patch b/target/linux/generic/patches-2.6.31/053-lzo_compression_for_initramfs.patch
new file mode 100644
index 0000000000..c05c3833d0
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/053-lzo_compression_for_initramfs.patch
@@ -0,0 +1,106 @@
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -120,6 +120,10 @@ config DECOMPRESS_LZMA
+ config DECOMPRESS_LZMA_NEEDED
+ 	 boolean
+ 
++config DECOMPRESS_LZO
++	select LZO_DECOMPRESS
++	tristate
++
+ #
+ # Generic allocator support is selected if needed
+ #
+--- a/lib/Makefile
++++ b/lib/Makefile
+@@ -69,6 +69,7 @@ obj-$(CONFIG_LZO_DECOMPRESS) += lzo/
+ lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
+ lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
+ lib-$(CONFIG_DECOMPRESS_LZMA) += decompress_unlzma.o
++lib-$(CONFIG_DECOMPRESS_LZO) += decompress_unlzo.o
+ 
+ obj-$(CONFIG_TEXTSEARCH) += textsearch.o
+ obj-$(CONFIG_TEXTSEARCH_KMP) += ts_kmp.o
+--- a/lib/decompress.c
++++ b/lib/decompress.c
+@@ -9,6 +9,7 @@
+ #include <linux/decompress/bunzip2.h>
+ #include <linux/decompress/unlzma.h>
+ #include <linux/decompress/inflate.h>
++#include <linux/decompress/unlzo.h>
+ 
+ #include <linux/types.h>
+ #include <linux/string.h>
+@@ -22,6 +23,9 @@
+ #ifndef CONFIG_DECOMPRESS_LZMA
+ # define unlzma NULL
+ #endif
++#ifndef CONFIG_DECOMPRESS_LZO
++# define unlzo NULL
++#endif
+ 
+ static const struct compress_format {
+ 	unsigned char magic[2];
+@@ -32,6 +36,7 @@ static const struct compress_format {
+ 	{ {037, 0236}, "gzip", gunzip },
+ 	{ {0x42, 0x5a}, "bzip2", bunzip2 },
+ 	{ {0x5d, 0x00}, "lzma", unlzma },
++	{ {0x89, 0x4c}, "lzo", unlzo },
+ 	{ {0, 0}, NULL, NULL }
+ };
+ 
+--- a/usr/Kconfig
++++ b/usr/Kconfig
+@@ -72,6 +72,15 @@ config RD_LZMA
+ 	  Support loading of a LZMA encoded initial ramdisk or cpio buffer
+ 	  If unsure, say N.
+ 
++config RD_LZO
++	bool "Support initial ramdisks compressed using LZO" if EMBEDDED
++	default !EMBEDDED
++	depends on BLK_DEV_INITRD && HAVE_KERNEL_LZO
++	select DECOMPRESS_LZO
++	help
++	  Support loading of a LZO encoded initial ramdisk or cpio buffer
++	  If unsure, say N.
++
+ choice
+ 	prompt "Built-in initramfs compression mode" if INITRAMFS_SOURCE!=""
+ 	help
+@@ -108,16 +117,15 @@ config INITRAMFS_COMPRESSION_GZIP
+ 	bool "Gzip"
+ 	depends on RD_GZIP
+ 	help
+-	  The old and tried gzip compression. Its compression ratio is
+-	  the poorest among the 3 choices; however its speed (both
+-	  compression and decompression) is the fastest.
++	  The old and tried gzip compression. It provides a good balance
++	  between compression ratio and decompression speed.
+ 
+ config INITRAMFS_COMPRESSION_BZIP2
+ 	bool "Bzip2"
+ 	depends on RD_BZIP2
+ 	help
+ 	  Its compression ratio and speed is intermediate.
+-	  Decompression speed is slowest among the three.  The initramfs
++	  Decompression speed is slowest among the four.  The initramfs
+ 	  size is about 10% smaller with bzip2, in comparison to gzip.
+ 	  Bzip2 uses a large amount of memory. For modern kernels you
+ 	  will need at least 8MB RAM or more for booting.
+@@ -128,7 +136,15 @@ config INITRAMFS_COMPRESSION_LZMA
+ 	help
+ 	  The most recent compression algorithm.
+ 	  Its ratio is best, decompression speed is between the other
+-	  two. Compression is slowest.	The initramfs size is about 33%
++	  three. Compression is slowest. The initramfs size is about 33%
+ 	  smaller with LZMA in comparison to gzip.
+ 
++config INITRAMFS_COMPRESSION_LZO
++	bool "LZO"
++	depends on RD_LZO
++	help
++	  Its compression ratio is the poorest among the four. The kernel
++	  size is about about 10% bigger than gzip; however its speed
++	  (both compression and decompression) is the fastest.
++
+ endchoice
diff --git a/target/linux/generic/patches-2.6.31/055-lzma_arm_kernel.patch b/target/linux/generic/patches-2.6.31/055-lzma_arm_kernel.patch
new file mode 100644
index 0000000000..a0111bd554
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/055-lzma_arm_kernel.patch
@@ -0,0 +1,57 @@
+From d0f226a0f104c7d1da1d215b8013359273e39e18 Mon Sep 17 00:00:00 2001
+From: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+Date: Fri, 16 Oct 2009 16:17:22 +0200
+Subject: [PATCH] Add LZMA decompression on ARM
+
+
+Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+---
+ arch/arm/Kconfig                      |    1 +
+ arch/arm/boot/compressed/Makefile     |    1 +
+ arch/arm/boot/compressed/misc.c       |    4 ++++
+ arch/arm/boot/compressed/piggy.lzma.S |    6 ++++++
+ 4 files changed, 12 insertions(+), 0 deletions(-)
+ create mode 100644 arch/arm/boot/compressed/piggy.lzma.S
+
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -20,6 +20,7 @@ config ARM
+ 	select HAVE_GENERIC_DMA_COHERENT
+ 	select HAVE_KERNEL_GZIP
+ 	select HAVE_KERNEL_LZO
++	select HAVE_KERNEL_LZMA
+ 	help
+ 	  The ARM series is a line of low-power-consumption RISC chip designs
+ 	  licensed by ARM Ltd and targeted at embedded applications and
+--- a/arch/arm/boot/compressed/Makefile
++++ b/arch/arm/boot/compressed/Makefile
+@@ -65,6 +65,7 @@ SEDFLAGS	= s/TEXT_START/$(ZTEXTADDR)/;s/
+ 
+ suffix_$(CONFIG_KERNEL_GZIP) = gzip
+ suffix_$(CONFIG_KERNEL_LZO)  = lzo
++suffix_$(CONFIG_KERNEL_LZMA)  = lzma
+ 
+ targets       := vmlinux vmlinux.lds \
+ 		 piggy.$(suffix_y) piggy.$(suffix_y).o \
+--- a/arch/arm/boot/compressed/misc.c
++++ b/arch/arm/boot/compressed/misc.c
+@@ -237,6 +237,10 @@ static unsigned long free_mem_end_ptr;
+ #include "../../../../lib/decompress_inflate.c"
+ #endif
+ 
++#ifdef CONFIG_KERNEL_LZMA
++#include "../../../../lib/decompress_unlzma.c"
++#endif
++
+ #ifdef CONFIG_KERNEL_LZO
+ #include "../../../../lib/decompress_unlzo.c"
+ #endif
+--- /dev/null
++++ b/arch/arm/boot/compressed/piggy.lzma.S
+@@ -0,0 +1,6 @@
++	.section .piggydata,#alloc
++	.globl	input_data
++input_data:
++	.incbin	"arch/arm/boot/compressed/piggy.lzma"
++	.globl	input_data_end
++input_data_end:
diff --git a/target/linux/generic/patches-2.6.31/060-block2mtd_init.patch b/target/linux/generic/patches-2.6.31/060-block2mtd_init.patch
new file mode 100644
index 0000000000..50df4aae0f
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/060-block2mtd_init.patch
@@ -0,0 +1,110 @@
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -14,6 +14,7 @@
+ #include <linux/list.h>
+ #include <linux/init.h>
+ #include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
+ #include <linux/buffer_head.h>
+ #include <linux/mutex.h>
+ #include <linux/mount.h>
+@@ -232,10 +233,11 @@ static void block2mtd_free_device(struct
+ 
+ 
+ /* FIXME: ensure that mtd->size % erase_size == 0 */
+-static struct block2mtd_dev *add_device(char *devname, int erase_size)
++static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname)
+ {
+ 	struct block_device *bdev;
+ 	struct block2mtd_dev *dev;
++	struct mtd_partition *part;
+ 	char *name;
+ 
+ 	if (!devname)
+@@ -273,17 +275,17 @@ static struct block2mtd_dev *add_device(
+ 
+ 	mutex_init(&dev->write_mutex);
+ 
+-	/* Setup the MTD structure */
+-	/* make the name contain the block device in */
+-	name = kmalloc(sizeof("block2mtd: ") + strlen(devname) + 1,
+-			GFP_KERNEL);
++	if (!mtdname)
++		mtdname = devname;
++
++	name = kmalloc(strlen(mtdname) + 1, GFP_KERNEL);
+ 	if (!name)
+ 		goto devinit_err;
+ 
+-	sprintf(name, "block2mtd: %s", devname);
++	strcpy(name, mtdname);
+ 	dev->mtd.name = name;
+ 
+-	dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK;
++	dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK & ~(erase_size - 1);
+ 	dev->mtd.erasesize = erase_size;
+ 	dev->mtd.writesize = 1;
+ 	dev->mtd.type = MTD_RAM;
+@@ -296,14 +298,17 @@ static struct block2mtd_dev *add_device(
+ 	dev->mtd.priv = dev;
+ 	dev->mtd.owner = THIS_MODULE;
+ 
+-	if (add_mtd_device(&dev->mtd)) {
++	part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
++	part->name = dev->mtd.name;
++	part->offset = 0;
++	part->size = dev->mtd.size;
++	if (add_mtd_partitions(&dev->mtd, part, 1)) {
+ 		/* Device didnt get added, so free the entry */
+ 		goto devinit_err;
+ 	}
+ 	list_add(&dev->list, &blkmtd_device_list);
+ 	INFO("mtd%d: [%s] erase_size = %dKiB [%d]", dev->mtd.index,
+-			dev->mtd.name + strlen("block2mtd: "),
+-			dev->mtd.erasesize >> 10, dev->mtd.erasesize);
++			mtdname, dev->mtd.erasesize >> 10, dev->mtd.erasesize);
+ 	return dev;
+ 
+ devinit_err:
+@@ -376,9 +381,9 @@ static char block2mtd_paramline[80 + 12]
+ 
+ static int block2mtd_setup2(const char *val)
+ {
+-	char buf[80 + 12]; /* 80 for device, 12 for erase size */
++	char buf[80 + 12 + 80]; /* 80 for device, 12 for erase size, 80 for name */
+ 	char *str = buf;
+-	char *token[2];
++	char *token[3];
+ 	char *name;
+ 	size_t erase_size = PAGE_SIZE;
+ 	int i, ret;
+@@ -389,7 +394,7 @@ static int block2mtd_setup2(const char *
+ 	strcpy(str, val);
+ 	kill_final_newline(str);
+ 
+-	for (i = 0; i < 2; i++)
++	for (i = 0; i < 3; i++)
+ 		token[i] = strsep(&str, ",");
+ 
+ 	if (str)
+@@ -408,8 +413,10 @@ static int block2mtd_setup2(const char *
+ 			parse_err("illegal erase size");
+ 		}
+ 	}
++	if (token[2] && (strlen(token[2]) + 1 > 80))
++		parse_err("mtd device name too long");
+ 
+-	add_device(name, erase_size);
++	add_device(name, erase_size, token[2]);
+ 
+ 	return 0;
+ }
+@@ -443,7 +450,7 @@ static int block2mtd_setup(const char *v
+ 
+ 
+ module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);
+-MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>]\"");
++MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>]]\"");
+ 
+ static int __init block2mtd_init(void)
+ {
diff --git a/target/linux/generic/patches-2.6.31/065-rootfs_split.patch b/target/linux/generic/patches-2.6.31/065-rootfs_split.patch
new file mode 100644
index 0000000000..7956baf9b3
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/065-rootfs_split.patch
@@ -0,0 +1,625 @@
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -53,6 +53,16 @@ config MTD_TESTS
+ 	  should normally be compiled as kernel modules. The modules perform
+ 	  various checks and verifications when loaded.
+ 
++config MTD_ROOTFS_ROOT_DEV
++	bool "Automatically set 'rootfs' partition to be root filesystem"
++	depends on MTD_PARTITIONS
++	default y
++
++config MTD_ROOTFS_SPLIT
++	bool "Automatically split 'rootfs' partition for squashfs"
++	depends on MTD_PARTITIONS
++	default y
++
+ config MTD_REDBOOT_PARTS
+ 	tristate "RedBoot partition table parsing"
+ 	depends on MTD_PARTITIONS
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -18,6 +18,8 @@
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+ #include <linux/mtd/compatmac.h>
++#include <linux/root_dev.h>
++#include <linux/magic.h>
+ 
+ /* Our partition linked list */
+ static LIST_HEAD(mtd_partitions);
+@@ -35,7 +37,7 @@ struct mtd_part {
+  * the pointer to that structure with this macro.
+  */
+ #define PART(x)  ((struct mtd_part *)(x))
+-
++#define IS_PART(mtd) (mtd->read == part_read)
+ 
+ /*
+  * MTD methods which simply translate the effective address and pass through
+@@ -502,6 +504,150 @@ out_register:
+ 	return slave;
+ }
+ 
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++#define ROOTFS_SPLIT_NAME "rootfs_data"
++#define ROOTFS_REMOVED_NAME "<removed>"
++
++struct squashfs_super_block {
++	__le32 s_magic;
++	__le32 pad0[9];
++	__le64 bytes_used;
++};
++
++
++static int split_squashfs(struct mtd_info *master, int offset, int *split_offset)
++{
++	struct squashfs_super_block sb;
++	int len, ret;
++
++	ret = master->read(master, offset, sizeof(sb), &len, (void *) &sb);
++	if (ret || (len != sizeof(sb))) {
++		printk(KERN_ALERT "split_squashfs: error occured while reading "
++			"from \"%s\"\n", master->name);
++		return -EINVAL;
++	}
++
++	if (SQUASHFS_MAGIC != le32_to_cpu(sb.s_magic) ) {
++		printk(KERN_ALERT "split_squashfs: no squashfs found in \"%s\"\n",
++			master->name);
++		*split_offset = 0;
++		return 0;
++	}
++
++	if (le64_to_cpu((sb.bytes_used)) <= 0) {
++		printk(KERN_ALERT "split_squashfs: squashfs is empty in \"%s\"\n",
++			master->name);
++		*split_offset = 0;
++		return 0;
++	}
++
++	len = (u32) le64_to_cpu(sb.bytes_used);
++	len += (offset & 0x000fffff);
++	len +=  (master->erasesize - 1);
++	len &= ~(master->erasesize - 1);
++	len -= (offset & 0x000fffff);
++	*split_offset = offset + len;
++
++	return 0;
++}
++
++static int split_rootfs_data(struct mtd_info *master, struct mtd_info *rpart, const struct mtd_partition *part)
++{
++	struct mtd_partition *dpart;
++	struct mtd_part *slave = NULL;
++	int split_offset = 0;
++	int ret;
++
++	ret = split_squashfs(master, part->offset, &split_offset);
++	if (ret)
++		return ret;
++
++	if (split_offset <= 0)
++		return 0;
++
++	dpart = kmalloc(sizeof(*part)+sizeof(ROOTFS_SPLIT_NAME)+1, GFP_KERNEL);
++	if (dpart == NULL) {
++		printk(KERN_INFO "split_squashfs: no memory for partition \"%s\"\n",
++			ROOTFS_SPLIT_NAME);
++		return -ENOMEM;
++	}
++
++	memcpy(dpart, part, sizeof(*part));
++	dpart->name = (unsigned char *)&dpart[1];
++	strcpy(dpart->name, ROOTFS_SPLIT_NAME);
++
++	dpart->size -= split_offset - dpart->offset;
++	dpart->offset = split_offset;
++
++	if (dpart == NULL)
++		return 1;
++
++	printk(KERN_INFO "mtd: partition \"%s\" created automatically, ofs=%llX, len=%llX \n",
++		ROOTFS_SPLIT_NAME, dpart->offset, dpart->size);
++
++	slave = add_one_partition(master, dpart, 0, split_offset);
++	if (!slave) {
++		kfree(dpart);
++		return -ENOMEM;
++	}
++	rpart->split = &slave->mtd;
++
++	return 0;
++}
++
++static int refresh_rootfs_split(struct mtd_info *mtd)
++{
++	struct mtd_partition tpart;
++	struct mtd_part *part;
++	char *name;
++	//int index = 0;
++	int offset, size;
++	int ret;
++
++	part = PART(mtd);
++
++	/* check for the new squashfs offset first */
++	ret = split_squashfs(part->master, part->offset, &offset);
++	if (ret)
++		return ret;
++
++	if ((offset > 0) && !mtd->split) {
++		printk(KERN_INFO "%s: creating new split partition for \"%s\"\n", __func__, mtd->name);
++		/* if we don't have a rootfs split partition, create a new one */
++		tpart.name = (char *) mtd->name;
++		tpart.size = mtd->size;
++		tpart.offset = part->offset;
++
++		return split_rootfs_data(part->master, &part->mtd, &tpart);
++	} else if ((offset > 0) && mtd->split) {
++		/* update the offsets of the existing partition */
++		size = mtd->size + part->offset - offset;
++
++		part = PART(mtd->split);
++		part->offset = offset;
++		part->mtd.size = size;
++		printk(KERN_INFO "%s: %s partition \"" ROOTFS_SPLIT_NAME "\", offset: 0x%06x (0x%06x)\n",
++			__func__, (!strcmp(part->mtd.name, ROOTFS_SPLIT_NAME) ? "updating" : "creating"),
++			(u32) part->offset, (u32) part->mtd.size);
++		name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
++		strcpy(name, ROOTFS_SPLIT_NAME);
++		part->mtd.name = name;
++	} else if ((offset <= 0) && mtd->split) {
++		printk(KERN_INFO "%s: removing partition \"%s\"\n", __func__, mtd->split->name);
++
++		/* mark existing partition as removed */
++		part = PART(mtd->split);
++		name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
++		strcpy(name, ROOTFS_REMOVED_NAME);
++		part->mtd.name = name;
++		part->offset = 0;
++		part->mtd.size = 0;
++	}
++
++	return 0;
++}
++#endif /* CONFIG_MTD_ROOTFS_SPLIT */
++
+ /*
+  * This function, given a master MTD object and a partition table, creates
+  * and registers slave MTD objects which are bound to the master according to
+@@ -517,7 +663,7 @@ int add_mtd_partitions(struct mtd_info *
+ {
+ 	struct mtd_part *slave;
+ 	uint64_t cur_offset = 0;
+-	int i;
++	int i, ret;
+ 
+ 	printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
+ 
+@@ -525,6 +671,21 @@ int add_mtd_partitions(struct mtd_info *
+ 		slave = add_one_partition(master, parts + i, i, cur_offset);
+ 		if (!slave)
+ 			return -ENOMEM;
++
++		if (!strcmp(parts[i].name, "rootfs")) {
++#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
++			if (ROOT_DEV == 0) {
++				printk(KERN_NOTICE "mtd: partition \"rootfs\" "
++					"set to be root filesystem\n");
++				ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, slave->mtd.index);
++			}
++#endif
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++			ret = split_rootfs_data(master, &slave->mtd, &parts[i]);
++			/* if (ret == 0)
++				j++; */
++#endif
++		}
+ 		cur_offset = slave->offset + slave->mtd.size;
+ 	}
+ 
+@@ -532,6 +693,32 @@ int add_mtd_partitions(struct mtd_info *
+ }
+ EXPORT_SYMBOL(add_mtd_partitions);
+ 
++int refresh_mtd_partitions(struct mtd_info *mtd)
++{
++	int ret = 0;
++
++	if (IS_PART(mtd)) {
++		struct mtd_part *part;
++		struct mtd_info *master;
++
++		part = PART(mtd);
++		master = part->master;
++		if (master->refresh_device)
++			ret = master->refresh_device(master);
++	}
++
++	if (!ret && mtd->refresh_device)
++		ret = mtd->refresh_device(mtd);
++
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++	if (!ret && IS_PART(mtd) && !strcmp(mtd->name, "rootfs"))
++		refresh_rootfs_split(mtd);
++#endif
++
++	return 0;
++}
++EXPORT_SYMBOL_GPL(refresh_mtd_partitions);
++
+ static DEFINE_SPINLOCK(part_parser_lock);
+ static LIST_HEAD(part_parsers);
+ 
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -29,6 +29,8 @@ struct block2mtd_dev {
+ 	struct block_device *blkdev;
+ 	struct mtd_info mtd;
+ 	struct mutex write_mutex;
++	rwlock_t bdev_mutex;
++	char devname[0];
+ };
+ 
+ 
+@@ -81,6 +83,12 @@ static int block2mtd_erase(struct mtd_in
+ 	size_t len = instr->len;
+ 	int err;
+ 
++	read_lock(&dev->bdev_mutex);
++	if (!dev->blkdev) {
++		err = -EINVAL;
++		goto done;
++	}
++
+ 	instr->state = MTD_ERASING;
+ 	mutex_lock(&dev->write_mutex);
+ 	err = _block2mtd_erase(dev, from, len);
+@@ -93,6 +101,10 @@ static int block2mtd_erase(struct mtd_in
+ 
+ 	instr->state = MTD_ERASE_DONE;
+ 	mtd_erase_callback(instr);
++
++done:
++	read_unlock(&dev->bdev_mutex);
++
+ 	return err;
+ }
+ 
+@@ -104,10 +116,14 @@ static int block2mtd_read(struct mtd_inf
+ 	struct page *page;
+ 	int index = from >> PAGE_SHIFT;
+ 	int offset = from & (PAGE_SIZE-1);
+-	int cpylen;
++	int cpylen, err = 0;
++
++	read_lock(&dev->bdev_mutex);
++	if (!dev->blkdev || (from > mtd->size)) {
++		err = -EINVAL;
++		goto done;
++	}
+ 
+-	if (from > mtd->size)
+-		return -EINVAL;
+ 	if (from + len > mtd->size)
+ 		len = mtd->size - from;
+ 
+@@ -122,10 +138,14 @@ static int block2mtd_read(struct mtd_inf
+ 		len = len - cpylen;
+ 
+ 		page = page_read(dev->blkdev->bd_inode->i_mapping, index);
+-		if (!page)
+-			return -ENOMEM;
+-		if (IS_ERR(page))
+-			return PTR_ERR(page);
++		if (!page) {
++			err = -ENOMEM;
++			goto done;
++		}
++		if (IS_ERR(page)) {
++			err = PTR_ERR(page);
++			goto done;
++		}
+ 
+ 		memcpy(buf, page_address(page) + offset, cpylen);
+ 		page_cache_release(page);
+@@ -136,7 +156,10 @@ static int block2mtd_read(struct mtd_inf
+ 		offset = 0;
+ 		index++;
+ 	}
+-	return 0;
++
++done:
++	read_unlock(&dev->bdev_mutex);
++	return err;
+ }
+ 
+ 
+@@ -188,12 +211,22 @@ static int block2mtd_write(struct mtd_in
+ 		size_t *retlen, const u_char *buf)
+ {
+ 	struct block2mtd_dev *dev = mtd->priv;
+-	int err;
++	int err = 0;
++
++	read_lock(&dev->bdev_mutex);
++	if (!dev->blkdev) {
++		err = -EINVAL;
++		goto done;
++	}
+ 
+ 	if (!len)
+-		return 0;
+-	if (to >= mtd->size)
+-		return -ENOSPC;
++		goto done;
++
++	if (to >= mtd->size) {
++		err = -ENOSPC;
++		goto done;
++	}
++
+ 	if (to + len > mtd->size)
+ 		len = mtd->size - to;
+ 
+@@ -202,6 +235,9 @@ static int block2mtd_write(struct mtd_in
+ 	mutex_unlock(&dev->write_mutex);
+ 	if (err > 0)
+ 		err = 0;
++
++done:
++	read_unlock(&dev->bdev_mutex);
+ 	return err;
+ }
+ 
+@@ -210,52 +246,29 @@ static int block2mtd_write(struct mtd_in
+ static void block2mtd_sync(struct mtd_info *mtd)
+ {
+ 	struct block2mtd_dev *dev = mtd->priv;
+-	sync_blockdev(dev->blkdev);
+-	return;
+-}
+-
+-
+-static void block2mtd_free_device(struct block2mtd_dev *dev)
+-{
+-	if (!dev)
+-		return;
+-
+-	kfree(dev->mtd.name);
+ 
+-	if (dev->blkdev) {
+-		invalidate_mapping_pages(dev->blkdev->bd_inode->i_mapping,
+-					0, -1);
+-		close_bdev_exclusive(dev->blkdev, FMODE_READ|FMODE_WRITE);
+-	}
++	read_lock(&dev->bdev_mutex);
++	if (dev->blkdev)
++		sync_blockdev(dev->blkdev);
++	read_unlock(&dev->bdev_mutex);
+ 
+-	kfree(dev);
++	return;
+ }
+ 
+ 
+-/* FIXME: ensure that mtd->size % erase_size == 0 */
+-static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname)
++static int _open_bdev(struct block2mtd_dev *dev)
+ {
+ 	struct block_device *bdev;
+-	struct block2mtd_dev *dev;
+-	struct mtd_partition *part;
+-	char *name;
+-
+-	if (!devname)
+-		return NULL;
+-
+-	dev = kzalloc(sizeof(struct block2mtd_dev), GFP_KERNEL);
+-	if (!dev)
+-		return NULL;
+ 
+ 	/* Get a handle on the device */
+-	bdev = open_bdev_exclusive(devname, FMODE_READ|FMODE_WRITE, NULL);
++	bdev = open_bdev_exclusive(dev->devname, FMODE_READ|FMODE_WRITE, NULL);
+ #ifndef MODULE
+ 	if (IS_ERR(bdev)) {
+ 
+ 		/* We might not have rootfs mounted at this point. Try
+ 		   to resolve the device name by other means. */
+ 
+-		dev_t devt = name_to_dev_t(devname);
++		dev_t devt = name_to_dev_t(dev->devname);
+ 		if (devt) {
+ 			bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);
+ 		}
+@@ -263,17 +276,98 @@ static struct block2mtd_dev *add_device(
+ #endif
+ 
+ 	if (IS_ERR(bdev)) {
+-		ERROR("error: cannot open device %s", devname);
+-		goto devinit_err;
++		ERROR("error: cannot open device %s", dev->devname);
++		return 1;
+ 	}
+ 	dev->blkdev = bdev;
+ 
+ 	if (MAJOR(bdev->bd_dev) == MTD_BLOCK_MAJOR) {
+ 		ERROR("attempting to use an MTD device as a block device");
+-		goto devinit_err;
++		return 1;
+ 	}
+ 
++	return 0;
++}
++
++static void _close_bdev(struct block2mtd_dev *dev)
++{
++	struct block_device *bdev;
++
++	if (!dev->blkdev)
++		return;
++
++	bdev = dev->blkdev;
++	invalidate_mapping_pages(dev->blkdev->bd_inode->i_mapping, 0, -1);
++	close_bdev_exclusive(dev->blkdev, FMODE_READ|FMODE_WRITE);
++	dev->blkdev = NULL;
++}
++
++static void block2mtd_free_device(struct block2mtd_dev *dev)
++{
++	if (!dev)
++		return;
++
++	kfree(dev->mtd.name);
++	_close_bdev(dev);
++	kfree(dev);
++}
++
++
++static int block2mtd_refresh(struct mtd_info *mtd)
++{
++	struct block2mtd_dev *dev = mtd->priv;
++	struct block_device *bdev;
++	dev_t devt;
++	int err = 0;
++
++	/* no other mtd function can run at this point */
++	write_lock(&dev->bdev_mutex);
++
++	/* get the device number for the whole disk */
++	devt = MKDEV(MAJOR(dev->blkdev->bd_dev), 0);
++
++	/* close the old block device */
++	_close_bdev(dev);
++
++	/* open the whole disk, issue a partition rescan, then */
++	bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);
++	if (!bdev || !bdev->bd_disk)
++		err = -EINVAL;
++#ifndef CONFIG_MTD_BLOCK2MTD_MODULE
++	else
++		err = rescan_partitions(bdev->bd_disk, bdev);
++#endif
++	if (bdev)
++		close_bdev_exclusive(bdev, FMODE_READ|FMODE_WRITE);
++
++	/* try to open the partition block device again */
++	_open_bdev(dev);
++	write_unlock(&dev->bdev_mutex);
++
++	return err;
++}
++
++/* FIXME: ensure that mtd->size % erase_size == 0 */
++static struct block2mtd_dev *add_device(char *devname, int erase_size, char *mtdname)
++{
++	struct block2mtd_dev *dev;
++	struct mtd_partition *part;
++	char *name;
++
++	if (!devname)
++		return NULL;
++
++	dev = kzalloc(sizeof(struct block2mtd_dev) + strlen(devname) + 1, GFP_KERNEL);
++	if (!dev)
++		return NULL;
++
++	strcpy(dev->devname, devname);
++
++	if (_open_bdev(dev))
++		goto devinit_err;
++
+ 	mutex_init(&dev->write_mutex);
++	rwlock_init(&dev->bdev_mutex);
+ 
+ 	if (!mtdname)
+ 		mtdname = devname;
+@@ -297,6 +391,7 @@ static struct block2mtd_dev *add_device(
+ 	dev->mtd.read = block2mtd_read;
+ 	dev->mtd.priv = dev;
+ 	dev->mtd.owner = THIS_MODULE;
++	dev->mtd.refresh_device = block2mtd_refresh;
+ 
+ 	part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
+ 	part->name = dev->mtd.name;
+--- a/drivers/mtd/mtdchar.c
++++ b/drivers/mtd/mtdchar.c
+@@ -18,6 +18,7 @@
+ 
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/compatmac.h>
++#include <linux/mtd/partitions.h>
+ 
+ #include <asm/uaccess.h>
+ 
+@@ -814,6 +815,13 @@ static int mtd_ioctl(struct inode *inode
+ 		file->f_pos = 0;
+ 		break;
+ 	}
++#ifdef CONFIG_MTD_PARTITIONS
++	case MTDREFRESH:
++	{
++		ret = refresh_mtd_partitions(mtd);
++		break;
++	}
++#endif
+ 
+ 	default:
+ 		ret = -ENOTTY;
+--- a/include/linux/mtd/mtd.h
++++ b/include/linux/mtd/mtd.h
+@@ -101,6 +101,7 @@ struct mtd_oob_ops {
+ 	uint8_t		*oobbuf;
+ };
+ 
++struct mtd_info;
+ struct mtd_info {
+ 	u_char type;
+ 	uint32_t flags;
+@@ -241,6 +242,9 @@ struct mtd_info {
+ 	struct device dev;
+ 	int usecount;
+ 
++	int (*refresh_device)(struct mtd_info *mtd);
++	struct mtd_info *split;
++
+ 	/* If the driver is something smart, like UBI, it may need to maintain
+ 	 * its own reference counting. The below functions are only for driver.
+ 	 * The driver may register its callbacks. These callbacks are not
+--- a/include/linux/mtd/partitions.h
++++ b/include/linux/mtd/partitions.h
+@@ -34,12 +34,14 @@
+  * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK).
+  */
+ 
++struct mtd_partition;
+ struct mtd_partition {
+ 	char *name;			/* identifier string */
+ 	uint64_t size;			/* partition size */
+ 	uint64_t offset;		/* offset within the master MTD space */
+ 	uint32_t mask_flags;		/* master MTD flags to mask out for this partition */
+ 	struct nand_ecclayout *ecclayout;	/* out of band layout for this partition (NAND only)*/
++	int (*refresh_partition)(struct mtd_info *);
+ };
+ 
+ #define MTDPART_OFS_NXTBLK	(-2)
+@@ -51,6 +53,7 @@ struct mtd_info;
+ 
+ int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
+ int del_mtd_partitions(struct mtd_info *);
++int refresh_mtd_partitions(struct mtd_info *);
+ 
+ /*
+  * Functions dealing with the various ways of partitioning the space
+--- a/include/mtd/mtd-abi.h
++++ b/include/mtd/mtd-abi.h
+@@ -110,6 +110,7 @@ struct otp_info {
+ #define MEMERASE64		_IOW('M', 20, struct erase_info_user64)
+ #define MEMWRITEOOB64		_IOWR('M', 21, struct mtd_oob_buf64)
+ #define MEMREADOOB64		_IOWR('M', 22, struct mtd_oob_buf64)
++#define MTDREFRESH		_IO('M', 23)
+ 
+ /*
+  * Obsolete legacy interface. Keep it in order not to break userspace
diff --git a/target/linux/generic/patches-2.6.31/066-block2mtd_probe.patch b/target/linux/generic/patches-2.6.31/066-block2mtd_probe.patch
new file mode 100644
index 0000000000..b2b1a347f4
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/066-block2mtd_probe.patch
@@ -0,0 +1,10 @@
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -268,6 +268,7 @@ static int _open_bdev(struct block2mtd_d
+ 		/* We might not have rootfs mounted at this point. Try
+ 		   to resolve the device name by other means. */
+ 
++		wait_for_device_probe();
+ 		dev_t devt = name_to_dev_t(dev->devname);
+ 		if (devt) {
+ 			bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);
diff --git a/target/linux/generic/patches-2.6.31/070-redboot_space.patch b/target/linux/generic/patches-2.6.31/070-redboot_space.patch
new file mode 100644
index 0000000000..6ace83c01a
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/070-redboot_space.patch
@@ -0,0 +1,30 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -249,14 +249,21 @@ static int parse_redboot_partitions(stru
+ #endif
+ 		names += strlen(names)+1;
+ 
+-#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+ 		if(fl->next && fl->img->flash_base + fl->img->size + master->erasesize <= fl->next->img->flash_base) {
+-			i++;
+-			parts[i].offset = parts[i-1].size + parts[i-1].offset;
+-			parts[i].size = fl->next->img->flash_base - parts[i].offset;
+-			parts[i].name = nullname;
+-		}
++			if (!strcmp(parts[i].name, "rootfs")) {
++				parts[i].size = fl->next->img->flash_base;
++				parts[i].size &= ~(master->erasesize - 1);
++				parts[i].size -= parts[i].offset;
++#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
++				nrparts--;
++			} else {
++				i++;
++				parts[i].offset = parts[i-1].size + parts[i-1].offset;
++				parts[i].size = fl->next->img->flash_base - parts[i].offset;
++				parts[i].name = nullname;
+ #endif
++			}
++		}
+ 		tmp_fl = fl;
+ 		fl = fl->next;
+ 		kfree(tmp_fl);
diff --git a/target/linux/generic/patches-2.6.31/071-redboot_boardconfig.patch b/target/linux/generic/patches-2.6.31/071-redboot_boardconfig.patch
new file mode 100644
index 0000000000..f9bc4fe36b
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/071-redboot_boardconfig.patch
@@ -0,0 +1,60 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -11,6 +11,8 @@
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+ 
++#define BOARD_CONFIG_PART		"boardconfig"
++
+ struct fis_image_desc {
+     unsigned char name[16];      // Null terminated name
+     uint32_t	  flash_base;    // Address within FLASH of image
+@@ -41,6 +43,7 @@ static int parse_redboot_partitions(stru
+                              struct mtd_partition **pparts,
+                              unsigned long fis_origin)
+ {
++	unsigned long max_offset = 0;
+ 	int nrparts = 0;
+ 	struct fis_image_desc *buf;
+ 	struct mtd_partition *parts;
+@@ -209,14 +212,14 @@ static int parse_redboot_partitions(stru
+ 		}
+ 	}
+ #endif
+-	parts = kzalloc(sizeof(*parts)*nrparts + nulllen + namelen, GFP_KERNEL);
++	parts = kzalloc(sizeof(*parts) * (nrparts + 1) + nulllen + namelen + sizeof(BOARD_CONFIG_PART), GFP_KERNEL);
+ 
+ 	if (!parts) {
+ 		ret = -ENOMEM;
+ 		goto out;
+ 	}
+ 
+-	nullname = (char *)&parts[nrparts];
++	nullname = (char *)&parts[nrparts + 1];
+ #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+ 	if (nulllen > 0) {
+ 		strcpy(nullname, nullstring);
+@@ -235,6 +238,8 @@ static int parse_redboot_partitions(stru
+ 	}
+ #endif
+ 	for ( ; i<nrparts; i++) {
++		if(max_offset < buf[i].flash_base + buf[i].size)
++			max_offset = buf[i].flash_base + buf[i].size;
+ 		parts[i].size = fl->img->size;
+ 		parts[i].offset = fl->img->flash_base;
+ 		parts[i].name = names;
+@@ -268,6 +273,14 @@ static int parse_redboot_partitions(stru
+ 		fl = fl->next;
+ 		kfree(tmp_fl);
+ 	}
++	if(master->size - max_offset >= master->erasesize)
++	{
++		parts[nrparts].size = master->size - max_offset;
++		parts[nrparts].offset = max_offset;
++		parts[nrparts].name = names;
++		strcpy(names, BOARD_CONFIG_PART);
++		nrparts++;
++	}
+ 	ret = nrparts;
+ 	*pparts = parts;
+  out:
diff --git a/target/linux/generic/patches-2.6.31/080-mtd_plat_nand_chip_fixup.patch b/target/linux/generic/patches-2.6.31/080-mtd_plat_nand_chip_fixup.patch
new file mode 100644
index 0000000000..2566151ef9
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/080-mtd_plat_nand_chip_fixup.patch
@@ -0,0 +1,32 @@
+--- a/include/linux/mtd/nand.h
++++ b/include/linux/mtd/nand.h
+@@ -575,6 +575,7 @@ struct platform_nand_chip {
+ 	int			chip_delay;
+ 	unsigned int		options;
+ 	const char		**part_probe_types;
++	int			(*chip_fixup)(struct mtd_info *mtd);
+ 	void			(*set_parts)(uint64_t size,
+ 					struct platform_nand_chip *chip);
+ 	void			*priv;
+--- a/drivers/mtd/nand/plat_nand.c
++++ b/drivers/mtd/nand/plat_nand.c
+@@ -80,7 +80,18 @@ static int __devinit plat_nand_probe(str
+ 	}
+ 
+ 	/* Scan to find existance of the device */
+-	if (nand_scan(&data->mtd, 1)) {
++	if (nand_scan_ident(&data->mtd, 1)) {
++		res = -ENXIO;
++		goto out;
++	}
++
++	if (pdata->chip.chip_fixup) {
++		res = pdata->chip.chip_fixup(&data->mtd);
++		if (res)
++			goto out;
++	}
++
++	if (nand_scan_tail(&data->mtd)) {
+ 		res = -ENXIO;
+ 		goto out;
+ 	}
diff --git a/target/linux/generic/patches-2.6.31/081-mtd_myloader_partition_parser.patch b/target/linux/generic/patches-2.6.31/081-mtd_myloader_partition_parser.patch
new file mode 100644
index 0000000000..61b822ee88
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/081-mtd_myloader_partition_parser.patch
@@ -0,0 +1,35 @@
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -181,6 +181,22 @@ config MTD_AR7_PARTS
+ 	---help---
+ 	  TI AR7 partitioning support
+ 
++config MTD_MYLOADER_PARTS
++	tristate "MyLoader partition parsing"
++	depends on MTD_PARTITIONS && (ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX)
++	---help---
++	  MyLoader is a bootloader which allows the user to define partitions
++	  in flash devices, by putting a table in the second erase block
++	  on the device, similar to a partition table. This table gives the 
++	  offsets and lengths of the user defined partitions.
++
++	  If you need code which can detect and parse these tables, and
++	  register MTD 'partitions' corresponding to each image detected,
++	  enable this option.
++
++	  You will still need the parsing functions to be called by the driver
++	  for your particular device. It won't happen automatically.
++
+ comment "User Modules And Translation Layers"
+ 
+ config MTD_CHAR
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdli
+ obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
+ obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
+ obj-$(CONFIG_MTD_OF_PARTS)      += ofpart.o
++obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+ 
+ # 'Users' - code which presents functionality to userspace.
+ obj-$(CONFIG_MTD_CHAR)		+= mtdchar.o
diff --git a/target/linux/generic/patches-2.6.31/082-mtd_info_move_forward_decl.patch b/target/linux/generic/patches-2.6.31/082-mtd_info_move_forward_decl.patch
new file mode 100644
index 0000000000..13f0a217d4
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/082-mtd_info_move_forward_decl.patch
@@ -0,0 +1,18 @@
+--- a/include/linux/mtd/partitions.h
++++ b/include/linux/mtd/partitions.h
+@@ -33,6 +33,7 @@
+  * Note: writeable partitions require their size and offset be
+  * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK).
+  */
++struct mtd_info;
+ 
+ struct mtd_partition;
+ struct mtd_partition {
+@@ -49,7 +50,6 @@ struct mtd_partition {
+ #define MTDPART_SIZ_FULL	(0)
+ 
+ 
+-struct mtd_info;
+ 
+ int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
+ int del_mtd_partitions(struct mtd_info *);
diff --git a/target/linux/generic/patches-2.6.31/090-mtd_fix_nand_correct_data_return_code.patch b/target/linux/generic/patches-2.6.31/090-mtd_fix_nand_correct_data_return_code.patch
new file mode 100644
index 0000000000..be2c7d7323
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/090-mtd_fix_nand_correct_data_return_code.patch
@@ -0,0 +1,12 @@
+--- a/drivers/mtd/nand/nand_ecc.c
++++ b/drivers/mtd/nand/nand_ecc.c
+@@ -492,8 +492,7 @@ int nand_correct_data(struct mtd_info *m
+ 	if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1)
+ 		return 1;	/* error in ecc data; no action needed */
+ 
+-	printk(KERN_ERR "uncorrectable error : ");
+-	return -1;
++	return -EBADMSG;
+ }
+ EXPORT_SYMBOL(nand_correct_data);
+ 
diff --git a/target/linux/generic/patches-2.6.31/100-netfilter_layer7_2.21.patch b/target/linux/generic/patches-2.6.31/100-netfilter_layer7_2.21.patch
new file mode 100644
index 0000000000..5e4032a82a
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/100-netfilter_layer7_2.21.patch
@@ -0,0 +1,2132 @@
+--- /dev/null
++++ b/include/linux/netfilter/xt_layer7.h
+@@ -0,0 +1,13 @@
++#ifndef _XT_LAYER7_H
++#define _XT_LAYER7_H
++
++#define MAX_PATTERN_LEN 8192
++#define MAX_PROTOCOL_LEN 256
++
++struct xt_layer7_info {
++    char protocol[MAX_PROTOCOL_LEN];
++    char pattern[MAX_PATTERN_LEN];
++    u_int8_t invert;
++};
++
++#endif /* _XT_LAYER7_H */
+--- a/include/net/netfilter/nf_conntrack.h
++++ b/include/net/netfilter/nf_conntrack.h
+@@ -116,6 +116,22 @@ struct nf_conn {
+ 	u_int32_t secmark;
+ #endif
+ 
++#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || \
++    defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++	struct {
++		/*
++		 * e.g. "http". NULL before decision. "unknown" after decision
++		 * if no match.
++		 */
++		char *app_proto;
++		/*
++		 * application layer data so far. NULL after match decision.
++		 */
++		char *app_data;
++		unsigned int app_data_len;
++	} layer7;
++#endif
++
+ 	/* Storage reserved for other modules: */
+ 	union nf_conntrack_proto proto;
+ 
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -858,6 +858,27 @@ config NETFILTER_XT_MATCH_STATE
+ 
+ 	  To compile it as a module, choose M here.  If unsure, say N.
+ 
++config NETFILTER_XT_MATCH_LAYER7
++	tristate '"layer7" match support'
++	depends on NETFILTER_XTABLES
++	depends on EXPERIMENTAL && (IP_NF_CONNTRACK || NF_CONNTRACK)
++       depends on NF_CT_ACCT
++	help
++	  Say Y if you want to be able to classify connections (and their
++	  packets) based on regular expression matching of their application
++	  layer data.   This is one way to classify applications such as
++	  peer-to-peer filesharing systems that do not always use the same
++	  port.
++
++	  To compile it as a module, choose M here.  If unsure, say N.
++
++config NETFILTER_XT_MATCH_LAYER7_DEBUG
++        bool 'Layer 7 debugging output'
++        depends on NETFILTER_XT_MATCH_LAYER7
++        help
++          Say Y to get lots of debugging output.
++
++
+ config NETFILTER_XT_MATCH_STATISTIC
+ 	tristate '"statistic" match support'
+ 	depends on NETFILTER_ADVANCED
+--- a/net/netfilter/Makefile
++++ b/net/netfilter/Makefile
+@@ -89,6 +89,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_RECENT)
+ obj-$(CONFIG_NETFILTER_XT_MATCH_SCTP) += xt_sctp.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_SOCKET) += xt_socket.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STATE) += xt_state.o
++obj-$(CONFIG_NETFILTER_XT_MATCH_LAYER7) += xt_layer7.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STATISTIC) += xt_statistic.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STRING) += xt_string.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_TCPMSS) += xt_tcpmss.o
+--- a/net/netfilter/nf_conntrack_core.c
++++ b/net/netfilter/nf_conntrack_core.c
+@@ -200,6 +200,14 @@ destroy_conntrack(struct nf_conntrack *n
+ 	 * too. */
+ 	nf_ct_remove_expectations(ct);
+ 
++	#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++	if(ct->layer7.app_proto)
++		kfree(ct->layer7.app_proto);
++	if(ct->layer7.app_data)
++	kfree(ct->layer7.app_data);
++	#endif
++
++
+ 	/* We overload first tuple to link into unconfirmed list. */
+ 	if (!nf_ct_is_confirmed(ct)) {
+ 		BUG_ON(hlist_nulls_unhashed(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode));
+--- a/net/netfilter/nf_conntrack_standalone.c
++++ b/net/netfilter/nf_conntrack_standalone.c
+@@ -171,6 +171,12 @@ static int ct_seq_show(struct seq_file *
+ 		goto release;
+ #endif
+ 
++#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++	if(ct->layer7.app_proto &&
++           seq_printf(s, "l7proto=%s ", ct->layer7.app_proto))
++		return -ENOSPC;
++#endif
++
+ 	if (seq_printf(s, "use=%u\n", atomic_read(&ct->ct_general.use)))
+ 		goto release;
+ 
+--- /dev/null
++++ b/net/netfilter/regexp/regexp.c
+@@ -0,0 +1,1197 @@
++/*
++ * regcomp and regexec -- regsub and regerror are elsewhere
++ * @(#)regexp.c	1.3 of 18 April 87
++ *
++ *	Copyright (c) 1986 by University of Toronto.
++ *	Written by Henry Spencer.  Not derived from licensed software.
++ *
++ *	Permission is granted to anyone to use this software for any
++ *	purpose on any computer system, and to redistribute it freely,
++ *	subject to the following restrictions:
++ *
++ *	1. The author is not responsible for the consequences of use of
++ *		this software, no matter how awful, even if they arise
++ *		from defects in it.
++ *
++ *	2. The origin of this software must not be misrepresented, either
++ *		by explicit claim or by omission.
++ *
++ *	3. Altered versions must be plainly marked as such, and must not
++ *		be misrepresented as being the original software.
++ *
++ * Beware that some of this code is subtly aware of the way operator
++ * precedence is structured in regular expressions.  Serious changes in
++ * regular-expression syntax might require a total rethink.
++ *
++ * This code was modified by Ethan Sommer to work within the kernel
++ * (it now uses kmalloc etc..)
++ *
++ * Modified slightly by Matthew Strait to use more modern C.
++ */
++
++#include "regexp.h"
++#include "regmagic.h"
++
++/* added by ethan and matt.  Lets it work in both kernel and user space.
++(So iptables can use it, for instance.)  Yea, it goes both ways... */
++#if __KERNEL__
++  #define malloc(foo) kmalloc(foo,GFP_ATOMIC)
++#else
++  #define printk(format,args...) printf(format,##args)
++#endif
++
++void regerror(char * s)
++{
++        printk("<3>Regexp: %s\n", s);
++        /* NOTREACHED */
++}
++
++/*
++ * The "internal use only" fields in regexp.h are present to pass info from
++ * compile to execute that permits the execute phase to run lots faster on
++ * simple cases.  They are:
++ *
++ * regstart	char that must begin a match; '\0' if none obvious
++ * reganch	is the match anchored (at beginning-of-line only)?
++ * regmust	string (pointer into program) that match must include, or NULL
++ * regmlen	length of regmust string
++ *
++ * Regstart and reganch permit very fast decisions on suitable starting points
++ * for a match, cutting down the work a lot.  Regmust permits fast rejection
++ * of lines that cannot possibly match.  The regmust tests are costly enough
++ * that regcomp() supplies a regmust only if the r.e. contains something
++ * potentially expensive (at present, the only such thing detected is * or +
++ * at the start of the r.e., which can involve a lot of backup).  Regmlen is
++ * supplied because the test in regexec() needs it and regcomp() is computing
++ * it anyway.
++ */
++
++/*
++ * Structure for regexp "program".  This is essentially a linear encoding
++ * of a nondeterministic finite-state machine (aka syntax charts or
++ * "railroad normal form" in parsing technology).  Each node is an opcode
++ * plus a "next" pointer, possibly plus an operand.  "Next" pointers of
++ * all nodes except BRANCH implement concatenation; a "next" pointer with
++ * a BRANCH on both ends of it is connecting two alternatives.  (Here we
++ * have one of the subtle syntax dependencies:  an individual BRANCH (as
++ * opposed to a collection of them) is never concatenated with anything
++ * because of operator precedence.)  The operand of some types of node is
++ * a literal string; for others, it is a node leading into a sub-FSM.  In
++ * particular, the operand of a BRANCH node is the first node of the branch.
++ * (NB this is *not* a tree structure:  the tail of the branch connects
++ * to the thing following the set of BRANCHes.)  The opcodes are:
++ */
++
++/* definition	number	opnd?	meaning */
++#define	END	0	/* no	End of program. */
++#define	BOL	1	/* no	Match "" at beginning of line. */
++#define	EOL	2	/* no	Match "" at end of line. */
++#define	ANY	3	/* no	Match any one character. */
++#define	ANYOF	4	/* str	Match any character in this string. */
++#define	ANYBUT	5	/* str	Match any character not in this string. */
++#define	BRANCH	6	/* node	Match this alternative, or the next... */
++#define	BACK	7	/* no	Match "", "next" ptr points backward. */
++#define	EXACTLY	8	/* str	Match this string. */
++#define	NOTHING	9	/* no	Match empty string. */
++#define	STAR	10	/* node	Match this (simple) thing 0 or more times. */
++#define	PLUS	11	/* node	Match this (simple) thing 1 or more times. */
++#define	OPEN	20	/* no	Mark this point in input as start of #n. */
++			/*	OPEN+1 is number 1, etc. */
++#define	CLOSE	30	/* no	Analogous to OPEN. */
++
++/*
++ * Opcode notes:
++ *
++ * BRANCH	The set of branches constituting a single choice are hooked
++ *		together with their "next" pointers, since precedence prevents
++ *		anything being concatenated to any individual branch.  The
++ *		"next" pointer of the last BRANCH in a choice points to the
++ *		thing following the whole choice.  This is also where the
++ *		final "next" pointer of each individual branch points; each
++ *		branch starts with the operand node of a BRANCH node.
++ *
++ * BACK		Normal "next" pointers all implicitly point forward; BACK
++ *		exists to make loop structures possible.
++ *
++ * STAR,PLUS	'?', and complex '*' and '+', are implemented as circular
++ *		BRANCH structures using BACK.  Simple cases (one character
++ *		per match) are implemented with STAR and PLUS for speed
++ *		and to minimize recursive plunges.
++ *
++ * OPEN,CLOSE	...are numbered at compile time.
++ */
++
++/*
++ * A node is one char of opcode followed by two chars of "next" pointer.
++ * "Next" pointers are stored as two 8-bit pieces, high order first.  The
++ * value is a positive offset from the opcode of the node containing it.
++ * An operand, if any, simply follows the node.  (Note that much of the
++ * code generation knows about this implicit relationship.)
++ *
++ * Using two bytes for the "next" pointer is vast overkill for most things,
++ * but allows patterns to get big without disasters.
++ */
++#define	OP(p)	(*(p))
++#define	NEXT(p)	(((*((p)+1)&0377)<<8) + (*((p)+2)&0377))
++#define	OPERAND(p)	((p) + 3)
++
++/*
++ * See regmagic.h for one further detail of program structure.
++ */
++
++
++/*
++ * Utility definitions.
++ */
++#ifndef CHARBITS
++#define	UCHARAT(p)	((int)*(unsigned char *)(p))
++#else
++#define	UCHARAT(p)	((int)*(p)&CHARBITS)
++#endif
++
++#define	FAIL(m)	{ regerror(m); return(NULL); }
++#define	ISMULT(c)	((c) == '*' || (c) == '+' || (c) == '?')
++#define	META	"^$.[()|?+*\\"
++
++/*
++ * Flags to be passed up and down.
++ */
++#define	HASWIDTH	01	/* Known never to match null string. */
++#define	SIMPLE		02	/* Simple enough to be STAR/PLUS operand. */
++#define	SPSTART		04	/* Starts with * or +. */
++#define	WORST		0	/* Worst case. */
++
++/*
++ * Global work variables for regcomp().
++ */
++struct match_globals {
++char *reginput;		/* String-input pointer. */
++char *regbol;		/* Beginning of input, for ^ check. */
++char **regstartp;	/* Pointer to startp array. */
++char **regendp;		/* Ditto for endp. */
++char *regparse;		/* Input-scan pointer. */
++int regnpar;		/* () count. */
++char regdummy;
++char *regcode;		/* Code-emit pointer; &regdummy = don't. */
++long regsize;		/* Code size. */
++};
++
++/*
++ * Forward declarations for regcomp()'s friends.
++ */
++#ifndef STATIC
++#define	STATIC	static
++#endif
++STATIC char *reg(struct match_globals *g, int paren,int *flagp);
++STATIC char *regbranch(struct match_globals *g, int *flagp);
++STATIC char *regpiece(struct match_globals *g, int *flagp);
++STATIC char *regatom(struct match_globals *g, int *flagp);
++STATIC char *regnode(struct match_globals *g, char op);
++STATIC char *regnext(struct match_globals *g, char *p);
++STATIC void regc(struct match_globals *g, char b);
++STATIC void reginsert(struct match_globals *g, char op, char *opnd);
++STATIC void regtail(struct match_globals *g, char *p, char *val);
++STATIC void regoptail(struct match_globals *g, char *p, char *val);
++
++
++__kernel_size_t my_strcspn(const char *s1,const char *s2)
++{
++        char *scan1;
++        char *scan2;
++        int count;
++
++        count = 0;
++        for (scan1 = (char *)s1; *scan1 != '\0'; scan1++) {
++                for (scan2 = (char *)s2; *scan2 != '\0';)       /* ++ moved down. */
++                        if (*scan1 == *scan2++)
++                                return(count);
++                count++;
++        }
++        return(count);
++}
++
++/*
++ - regcomp - compile a regular expression into internal code
++ *
++ * We can't allocate space until we know how big the compiled form will be,
++ * but we can't compile it (and thus know how big it is) until we've got a
++ * place to put the code.  So we cheat:  we compile it twice, once with code
++ * generation turned off and size counting turned on, and once "for real".
++ * This also means that we don't allocate space until we are sure that the
++ * thing really will compile successfully, and we never have to move the
++ * code and thus invalidate pointers into it.  (Note that it has to be in
++ * one piece because free() must be able to free it all.)
++ *
++ * Beware that the optimization-preparation code in here knows about some
++ * of the structure of the compiled regexp.
++ */
++regexp *
++regcomp(char *exp,int *patternsize)
++{
++	register regexp *r;
++	register char *scan;
++	register char *longest;
++	register int len;
++	int flags;
++	struct match_globals g;
++	
++	/* commented out by ethan
++	   extern char *malloc();
++	*/
++
++	if (exp == NULL)
++		FAIL("NULL argument");
++
++	/* First pass: determine size, legality. */
++	g.regparse = exp;
++	g.regnpar = 1;
++	g.regsize = 0L;
++	g.regcode = &g.regdummy;
++	regc(&g, MAGIC);
++	if (reg(&g, 0, &flags) == NULL)
++		return(NULL);
++
++	/* Small enough for pointer-storage convention? */
++	if (g.regsize >= 32767L)		/* Probably could be 65535L. */
++		FAIL("regexp too big");
++
++	/* Allocate space. */
++	*patternsize=sizeof(regexp) + (unsigned)g.regsize;
++	r = (regexp *)malloc(sizeof(regexp) + (unsigned)g.regsize);
++	if (r == NULL)
++		FAIL("out of space");
++
++	/* Second pass: emit code. */
++	g.regparse = exp;
++	g.regnpar = 1;
++	g.regcode = r->program;
++	regc(&g, MAGIC);
++	if (reg(&g, 0, &flags) == NULL)
++		return(NULL);
++
++	/* Dig out information for optimizations. */
++	r->regstart = '\0';	/* Worst-case defaults. */
++	r->reganch = 0;
++	r->regmust = NULL;
++	r->regmlen = 0;
++	scan = r->program+1;			/* First BRANCH. */
++	if (OP(regnext(&g, scan)) == END) {		/* Only one top-level choice. */
++		scan = OPERAND(scan);
++
++		/* Starting-point info. */
++		if (OP(scan) == EXACTLY)
++			r->regstart = *OPERAND(scan);
++		else if (OP(scan) == BOL)
++			r->reganch++;
++
++		/*
++		 * If there's something expensive in the r.e., find the
++		 * longest literal string that must appear and make it the
++		 * regmust.  Resolve ties in favor of later strings, since
++		 * the regstart check works with the beginning of the r.e.
++		 * and avoiding duplication strengthens checking.  Not a
++		 * strong reason, but sufficient in the absence of others.
++		 */
++		if (flags&SPSTART) {
++			longest = NULL;
++			len = 0;
++			for (; scan != NULL; scan = regnext(&g, scan))
++				if (OP(scan) == EXACTLY && strlen(OPERAND(scan)) >= len) {
++					longest = OPERAND(scan);
++					len = strlen(OPERAND(scan));
++				}
++			r->regmust = longest;
++			r->regmlen = len;
++		}
++	}
++
++	return(r);
++}
++
++/*
++ - reg - regular expression, i.e. main body or parenthesized thing
++ *
++ * Caller must absorb opening parenthesis.
++ *
++ * Combining parenthesis handling with the base level of regular expression
++ * is a trifle forced, but the need to tie the tails of the branches to what
++ * follows makes it hard to avoid.
++ */
++static char *
++reg(struct match_globals *g, int paren, int *flagp /* Parenthesized? */ )
++{
++	register char *ret;
++	register char *br;
++	register char *ender;
++	register int parno = 0; /* 0 makes gcc happy */
++	int flags;
++
++	*flagp = HASWIDTH;	/* Tentatively. */
++
++	/* Make an OPEN node, if parenthesized. */
++	if (paren) {
++		if (g->regnpar >= NSUBEXP)
++			FAIL("too many ()");
++		parno = g->regnpar;
++		g->regnpar++;
++		ret = regnode(g, OPEN+parno);
++	} else
++		ret = NULL;
++
++	/* Pick up the branches, linking them together. */
++	br = regbranch(g, &flags);
++	if (br == NULL)
++		return(NULL);
++	if (ret != NULL)
++		regtail(g, ret, br);	/* OPEN -> first. */
++	else
++		ret = br;
++	if (!(flags&HASWIDTH))
++		*flagp &= ~HASWIDTH;
++	*flagp |= flags&SPSTART;
++	while (*g->regparse == '|') {
++		g->regparse++;
++		br = regbranch(g, &flags);
++		if (br == NULL)
++			return(NULL);
++		regtail(g, ret, br);	/* BRANCH -> BRANCH. */
++		if (!(flags&HASWIDTH))
++			*flagp &= ~HASWIDTH;
++		*flagp |= flags&SPSTART;
++	}
++
++	/* Make a closing node, and hook it on the end. */
++	ender = regnode(g, (paren) ? CLOSE+parno : END);	
++	regtail(g, ret, ender);
++
++	/* Hook the tails of the branches to the closing node. */
++	for (br = ret; br != NULL; br = regnext(g, br))
++		regoptail(g, br, ender);
++
++	/* Check for proper termination. */
++	if (paren && *g->regparse++ != ')') {
++		FAIL("unmatched ()");
++	} else if (!paren && *g->regparse != '\0') {
++		if (*g->regparse == ')') {
++			FAIL("unmatched ()");
++		} else
++			FAIL("junk on end");	/* "Can't happen". */
++		/* NOTREACHED */
++	}
++
++	return(ret);
++}
++
++/*
++ - regbranch - one alternative of an | operator
++ *
++ * Implements the concatenation operator.
++ */
++static char *
++regbranch(struct match_globals *g, int *flagp)
++{
++	register char *ret;
++	register char *chain;
++	register char *latest;
++	int flags;
++
++	*flagp = WORST;		/* Tentatively. */
++
++	ret = regnode(g, BRANCH);
++	chain = NULL;
++	while (*g->regparse != '\0' && *g->regparse != '|' && *g->regparse != ')') {
++		latest = regpiece(g, &flags);
++		if (latest == NULL)
++			return(NULL);
++		*flagp |= flags&HASWIDTH;
++		if (chain == NULL)	/* First piece. */
++			*flagp |= flags&SPSTART;
++		else
++			regtail(g, chain, latest);
++		chain = latest;
++	}
++	if (chain == NULL)	/* Loop ran zero times. */
++		(void) regnode(g, NOTHING);
++
++	return(ret);
++}
++
++/*
++ - regpiece - something followed by possible [*+?]
++ *
++ * Note that the branching code sequences used for ? and the general cases
++ * of * and + are somewhat optimized:  they use the same NOTHING node as
++ * both the endmarker for their branch list and the body of the last branch.
++ * It might seem that this node could be dispensed with entirely, but the
++ * endmarker role is not redundant.
++ */
++static char *
++regpiece(struct match_globals *g, int *flagp)
++{
++	register char *ret;
++	register char op;
++	register char *next;
++	int flags;
++
++	ret = regatom(g, &flags);
++	if (ret == NULL)
++		return(NULL);
++
++	op = *g->regparse;
++	if (!ISMULT(op)) {
++		*flagp = flags;
++		return(ret);
++	}
++
++	if (!(flags&HASWIDTH) && op != '?')
++		FAIL("*+ operand could be empty");
++	*flagp = (op != '+') ? (WORST|SPSTART) : (WORST|HASWIDTH);
++
++	if (op == '*' && (flags&SIMPLE))
++		reginsert(g, STAR, ret);
++	else if (op == '*') {
++		/* Emit x* as (x&|), where & means "self". */
++		reginsert(g, BRANCH, ret);			/* Either x */
++		regoptail(g, ret, regnode(g, BACK));		/* and loop */
++		regoptail(g, ret, ret);			/* back */
++		regtail(g, ret, regnode(g, BRANCH));		/* or */
++		regtail(g, ret, regnode(g, NOTHING));		/* null. */
++	} else if (op == '+' && (flags&SIMPLE))
++		reginsert(g, PLUS, ret);
++	else if (op == '+') {
++		/* Emit x+ as x(&|), where & means "self". */
++		next = regnode(g, BRANCH);			/* Either */
++		regtail(g, ret, next);
++		regtail(g, regnode(g, BACK), ret);		/* loop back */
++		regtail(g, next, regnode(g, BRANCH));		/* or */
++		regtail(g, ret, regnode(g, NOTHING));		/* null. */
++	} else if (op == '?') {
++		/* Emit x? as (x|) */
++		reginsert(g, BRANCH, ret);			/* Either x */
++		regtail(g, ret, regnode(g, BRANCH));		/* or */
++		next = regnode(g, NOTHING);		/* null. */
++		regtail(g, ret, next);
++		regoptail(g, ret, next);
++	}
++	g->regparse++;
++	if (ISMULT(*g->regparse))
++		FAIL("nested *?+");
++
++	return(ret);
++}
++
++/*
++ - regatom - the lowest level
++ *
++ * Optimization:  gobbles an entire sequence of ordinary characters so that
++ * it can turn them into a single node, which is smaller to store and
++ * faster to run.  Backslashed characters are exceptions, each becoming a
++ * separate node; the code is simpler that way and it's not worth fixing.
++ */
++static char *
++regatom(struct match_globals *g, int *flagp)
++{
++	register char *ret;
++	int flags;
++
++	*flagp = WORST;		/* Tentatively. */
++
++	switch (*g->regparse++) {
++	case '^':
++		ret = regnode(g, BOL);
++		break;
++	case '$':
++		ret = regnode(g, EOL);
++		break;
++	case '.':
++		ret = regnode(g, ANY);
++		*flagp |= HASWIDTH|SIMPLE;
++		break;
++	case '[': {
++			register int class;
++			register int classend;
++
++			if (*g->regparse == '^') {	/* Complement of range. */
++				ret = regnode(g, ANYBUT);
++				g->regparse++;
++			} else
++				ret = regnode(g, ANYOF);
++			if (*g->regparse == ']' || *g->regparse == '-')
++				regc(g, *g->regparse++);
++			while (*g->regparse != '\0' && *g->regparse != ']') {
++				if (*g->regparse == '-') {
++					g->regparse++;
++					if (*g->regparse == ']' || *g->regparse == '\0')
++						regc(g, '-');
++					else {
++						class = UCHARAT(g->regparse-2)+1;
++						classend = UCHARAT(g->regparse);
++						if (class > classend+1)
++							FAIL("invalid [] range");
++						for (; class <= classend; class++)
++							regc(g, class);
++						g->regparse++;
++					}
++				} else
++					regc(g, *g->regparse++);
++			}
++			regc(g, '\0');
++			if (*g->regparse != ']')
++				FAIL("unmatched []");
++			g->regparse++;
++			*flagp |= HASWIDTH|SIMPLE;
++		}
++		break;
++	case '(':
++		ret = reg(g, 1, &flags);
++		if (ret == NULL)
++			return(NULL);
++		*flagp |= flags&(HASWIDTH|SPSTART);
++		break;
++	case '\0':
++	case '|':
++	case ')':
++		FAIL("internal urp");	/* Supposed to be caught earlier. */
++		break;
++	case '?':
++	case '+':
++	case '*':
++		FAIL("?+* follows nothing");
++		break;
++	case '\\':
++		if (*g->regparse == '\0')
++			FAIL("trailing \\");
++		ret = regnode(g, EXACTLY);
++		regc(g, *g->regparse++);
++		regc(g, '\0');
++		*flagp |= HASWIDTH|SIMPLE;
++		break;
++	default: {
++			register int len;
++			register char ender;
++
++			g->regparse--;
++			len = my_strcspn((const char *)g->regparse, (const char *)META);
++			if (len <= 0)
++				FAIL("internal disaster");
++			ender = *(g->regparse+len);
++			if (len > 1 && ISMULT(ender))
++				len--;		/* Back off clear of ?+* operand. */
++			*flagp |= HASWIDTH;
++			if (len == 1)
++				*flagp |= SIMPLE;
++			ret = regnode(g, EXACTLY);
++			while (len > 0) {
++				regc(g, *g->regparse++);
++				len--;
++			}
++			regc(g, '\0');
++		}
++		break;
++	}
++
++	return(ret);
++}
++
++/*
++ - regnode - emit a node
++ */
++static char *			/* Location. */
++regnode(struct match_globals *g, char op)
++{
++	register char *ret;
++	register char *ptr;
++
++	ret = g->regcode;
++	if (ret == &g->regdummy) {
++		g->regsize += 3;
++		return(ret);
++	}
++
++	ptr = ret;
++	*ptr++ = op;
++	*ptr++ = '\0';		/* Null "next" pointer. */
++	*ptr++ = '\0';
++	g->regcode = ptr;
++
++	return(ret);
++}
++
++/*
++ - regc - emit (if appropriate) a byte of code
++ */
++static void
++regc(struct match_globals *g, char b)
++{
++	if (g->regcode != &g->regdummy)
++		*g->regcode++ = b;
++	else
++		g->regsize++;
++}
++
++/*
++ - reginsert - insert an operator in front of already-emitted operand
++ *
++ * Means relocating the operand.
++ */
++static void
++reginsert(struct match_globals *g, char op, char* opnd)
++{
++	register char *src;
++	register char *dst;
++	register char *place;
++
++	if (g->regcode == &g->regdummy) {
++		g->regsize += 3;
++		return;
++	}
++
++	src = g->regcode;
++	g->regcode += 3;
++	dst = g->regcode;
++	while (src > opnd)
++		*--dst = *--src;
++
++	place = opnd;		/* Op node, where operand used to be. */
++	*place++ = op;
++	*place++ = '\0';
++	*place++ = '\0';
++}
++
++/*
++ - regtail - set the next-pointer at the end of a node chain
++ */
++static void
++regtail(struct match_globals *g, char *p, char *val)
++{
++	register char *scan;
++	register char *temp;
++	register int offset;
++
++	if (p == &g->regdummy)
++		return;
++
++	/* Find last node. */
++	scan = p;
++	for (;;) {
++		temp = regnext(g, scan);
++		if (temp == NULL)
++			break;
++		scan = temp;
++	}
++
++	if (OP(scan) == BACK)
++		offset = scan - val;
++	else
++		offset = val - scan;
++	*(scan+1) = (offset>>8)&0377;
++	*(scan+2) = offset&0377;
++}
++
++/*
++ - regoptail - regtail on operand of first argument; nop if operandless
++ */
++static void
++regoptail(struct match_globals *g, char *p, char *val)
++{
++	/* "Operandless" and "op != BRANCH" are synonymous in practice. */
++	if (p == NULL || p == &g->regdummy || OP(p) != BRANCH)
++		return;
++	regtail(g, OPERAND(p), val);
++}
++
++/*
++ * regexec and friends
++ */
++
++
++/*
++ * Forwards.
++ */
++STATIC int regtry(struct match_globals *g, regexp *prog, char *string);
++STATIC int regmatch(struct match_globals *g, char *prog);
++STATIC int regrepeat(struct match_globals *g, char *p);
++
++#ifdef DEBUG
++int regnarrate = 0;
++void regdump();
++STATIC char *regprop(char *op);
++#endif
++
++/*
++ - regexec - match a regexp against a string
++ */
++int
++regexec(regexp *prog, char *string)
++{
++	register char *s;
++	struct match_globals g;
++
++	/* Be paranoid... */
++	if (prog == NULL || string == NULL) {
++		printk("<3>Regexp: NULL parameter\n");
++		return(0);
++	}
++
++	/* Check validity of program. */
++	if (UCHARAT(prog->program) != MAGIC) {
++		printk("<3>Regexp: corrupted program\n");
++		return(0);
++	}
++
++	/* If there is a "must appear" string, look for it. */
++	if (prog->regmust != NULL) {
++		s = string;
++		while ((s = strchr(s, prog->regmust[0])) != NULL) {
++			if (strncmp(s, prog->regmust, prog->regmlen) == 0)
++				break;	/* Found it. */
++			s++;
++		}
++		if (s == NULL)	/* Not present. */
++			return(0);
++	}
++
++	/* Mark beginning of line for ^ . */
++	g.regbol = string;
++
++	/* Simplest case:  anchored match need be tried only once. */
++	if (prog->reganch)
++		return(regtry(&g, prog, string));
++
++	/* Messy cases:  unanchored match. */
++	s = string;
++	if (prog->regstart != '\0')
++		/* We know what char it must start with. */
++		while ((s = strchr(s, prog->regstart)) != NULL) {
++			if (regtry(&g, prog, s))
++				return(1);
++			s++;
++		}
++	else
++		/* We don't -- general case. */
++		do {
++			if (regtry(&g, prog, s))
++				return(1);
++		} while (*s++ != '\0');
++
++	/* Failure. */
++	return(0);
++}
++
++/*
++ - regtry - try match at specific point
++ */
++static int			/* 0 failure, 1 success */
++regtry(struct match_globals *g, regexp *prog, char *string)
++{
++	register int i;
++	register char **sp;
++	register char **ep;
++
++	g->reginput = string;
++	g->regstartp = prog->startp;
++	g->regendp = prog->endp;
++
++	sp = prog->startp;
++	ep = prog->endp;
++	for (i = NSUBEXP; i > 0; i--) {
++		*sp++ = NULL;
++		*ep++ = NULL;
++	}
++	if (regmatch(g, prog->program + 1)) {
++		prog->startp[0] = string;
++		prog->endp[0] = g->reginput;
++		return(1);
++	} else
++		return(0);
++}
++
++/*
++ - regmatch - main matching routine
++ *
++ * Conceptually the strategy is simple:  check to see whether the current
++ * node matches, call self recursively to see whether the rest matches,
++ * and then act accordingly.  In practice we make some effort to avoid
++ * recursion, in particular by going through "ordinary" nodes (that don't
++ * need to know whether the rest of the match failed) by a loop instead of
++ * by recursion.
++ */
++static int			/* 0 failure, 1 success */
++regmatch(struct match_globals *g, char *prog)
++{
++	register char *scan = prog; /* Current node. */
++	char *next;		    /* Next node. */
++
++#ifdef DEBUG
++	if (scan != NULL && regnarrate)
++		fprintf(stderr, "%s(\n", regprop(scan));
++#endif
++	while (scan != NULL) {
++#ifdef DEBUG
++		if (regnarrate)
++			fprintf(stderr, "%s...\n", regprop(scan));
++#endif
++		next = regnext(g, scan);
++
++		switch (OP(scan)) {
++		case BOL:
++			if (g->reginput != g->regbol)
++				return(0);
++			break;
++		case EOL:
++			if (*g->reginput != '\0')
++				return(0);
++			break;
++		case ANY:
++			if (*g->reginput == '\0')
++				return(0);
++			g->reginput++;
++			break;
++		case EXACTLY: {
++				register int len;
++				register char *opnd;
++
++				opnd = OPERAND(scan);
++				/* Inline the first character, for speed. */
++				if (*opnd != *g->reginput)
++					return(0);
++				len = strlen(opnd);
++				if (len > 1 && strncmp(opnd, g->reginput, len) != 0)
++					return(0);
++				g->reginput += len;
++			}
++			break;
++		case ANYOF:
++			if (*g->reginput == '\0' || strchr(OPERAND(scan), *g->reginput) == NULL)
++				return(0);
++			g->reginput++;
++			break;
++		case ANYBUT:
++			if (*g->reginput == '\0' || strchr(OPERAND(scan), *g->reginput) != NULL)
++				return(0);
++			g->reginput++;
++			break;
++		case NOTHING:
++		case BACK:
++			break;
++		case OPEN+1:
++		case OPEN+2:
++		case OPEN+3:
++		case OPEN+4:
++		case OPEN+5:
++		case OPEN+6:
++		case OPEN+7:
++		case OPEN+8:
++		case OPEN+9: {
++				register int no;
++				register char *save;
++
++				no = OP(scan) - OPEN;
++				save = g->reginput;
++
++				if (regmatch(g, next)) {
++					/*
++					 * Don't set startp if some later
++					 * invocation of the same parentheses
++					 * already has.
++					 */
++					if (g->regstartp[no] == NULL)
++						g->regstartp[no] = save;
++					return(1);
++				} else
++					return(0);
++			}
++			break;
++		case CLOSE+1:
++		case CLOSE+2:
++		case CLOSE+3:
++		case CLOSE+4:
++		case CLOSE+5:
++		case CLOSE+6:
++		case CLOSE+7:
++		case CLOSE+8:
++		case CLOSE+9:
++			{
++				register int no;
++				register char *save;
++
++				no = OP(scan) - CLOSE;
++				save = g->reginput;
++
++				if (regmatch(g, next)) {
++					/*
++					 * Don't set endp if some later
++					 * invocation of the same parentheses
++					 * already has.
++					 */
++					if (g->regendp[no] == NULL)
++						g->regendp[no] = save;
++					return(1);
++				} else
++					return(0);
++			}
++			break;
++		case BRANCH: {
++				register char *save;
++
++				if (OP(next) != BRANCH)		/* No choice. */
++					next = OPERAND(scan);	/* Avoid recursion. */
++				else {
++					do {
++						save = g->reginput;
++						if (regmatch(g, OPERAND(scan)))
++							return(1);
++						g->reginput = save;
++						scan = regnext(g, scan);
++					} while (scan != NULL && OP(scan) == BRANCH);
++					return(0);
++					/* NOTREACHED */
++				}
++			}
++			break;
++		case STAR:
++		case PLUS: {
++				register char nextch;
++				register int no;
++				register char *save;
++				register int min;
++
++				/*
++				 * Lookahead to avoid useless match attempts
++				 * when we know what character comes next.
++				 */
++				nextch = '\0';
++				if (OP(next) == EXACTLY)
++					nextch = *OPERAND(next);
++				min = (OP(scan) == STAR) ? 0 : 1;
++				save = g->reginput;
++				no = regrepeat(g, OPERAND(scan));
++				while (no >= min) {
++					/* If it could work, try it. */
++					if (nextch == '\0' || *g->reginput == nextch)
++						if (regmatch(g, next))
++							return(1);
++					/* Couldn't or didn't -- back up. */
++					no--;
++					g->reginput = save + no;
++				}
++				return(0);
++			}
++			break;
++		case END:
++			return(1);	/* Success! */
++			break;
++		default:
++			printk("<3>Regexp: memory corruption\n");
++			return(0);
++			break;
++		}
++
++		scan = next;
++	}
++
++	/*
++	 * We get here only if there's trouble -- normally "case END" is
++	 * the terminating point.
++	 */
++	printk("<3>Regexp: corrupted pointers\n");
++	return(0);
++}
++
++/*
++ - regrepeat - repeatedly match something simple, report how many
++ */
++static int
++regrepeat(struct match_globals *g, char *p)
++{
++	register int count = 0;
++	register char *scan;
++	register char *opnd;
++
++	scan = g->reginput;
++	opnd = OPERAND(p);
++	switch (OP(p)) {
++	case ANY:
++		count = strlen(scan);
++		scan += count;
++		break;
++	case EXACTLY:
++		while (*opnd == *scan) {
++			count++;
++			scan++;
++		}
++		break;
++	case ANYOF:
++		while (*scan != '\0' && strchr(opnd, *scan) != NULL) {
++			count++;
++			scan++;
++		}
++		break;
++	case ANYBUT:
++		while (*scan != '\0' && strchr(opnd, *scan) == NULL) {
++			count++;
++			scan++;
++		}
++		break;
++	default:		/* Oh dear.  Called inappropriately. */
++		printk("<3>Regexp: internal foulup\n");
++		count = 0;	/* Best compromise. */
++		break;
++	}
++	g->reginput = scan;
++
++	return(count);
++}
++
++/*
++ - regnext - dig the "next" pointer out of a node
++ */
++static char*
++regnext(struct match_globals *g, char *p)
++{
++	register int offset;
++
++	if (p == &g->regdummy)
++		return(NULL);
++
++	offset = NEXT(p);
++	if (offset == 0)
++		return(NULL);
++
++	if (OP(p) == BACK)
++		return(p-offset);
++	else
++		return(p+offset);
++}
++
++#ifdef DEBUG
++
++STATIC char *regprop();
++
++/*
++ - regdump - dump a regexp onto stdout in vaguely comprehensible form
++ */
++void
++regdump(regexp *r)
++{
++	register char *s;
++	register char op = EXACTLY;	/* Arbitrary non-END op. */
++	register char *next;
++	/* extern char *strchr(); */
++
++
++	s = r->program + 1;
++	while (op != END) {	/* While that wasn't END last time... */
++		op = OP(s);
++		printf("%2d%s", s-r->program, regprop(s));	/* Where, what. */
++		next = regnext(s);
++		if (next == NULL)		/* Next ptr. */
++			printf("(0)");
++		else
++			printf("(%d)", (s-r->program)+(next-s));
++		s += 3;
++		if (op == ANYOF || op == ANYBUT || op == EXACTLY) {
++			/* Literal string, where present. */
++			while (*s != '\0') {
++				putchar(*s);
++				s++;
++			}
++			s++;
++		}
++		putchar('\n');
++	}
++
++	/* Header fields of interest. */
++	if (r->regstart != '\0')
++		printf("start `%c' ", r->regstart);
++	if (r->reganch)
++		printf("anchored ");
++	if (r->regmust != NULL)
++		printf("must have \"%s\"", r->regmust);
++	printf("\n");
++}
++
++/*
++ - regprop - printable representation of opcode
++ */
++static char *
++regprop(char *op)
++{
++#define BUFLEN 50
++	register char *p;
++	static char buf[BUFLEN];
++
++	strcpy(buf, ":");
++
++	switch (OP(op)) {
++	case BOL:
++		p = "BOL";
++		break;
++	case EOL:
++		p = "EOL";
++		break;
++	case ANY:
++		p = "ANY";
++		break;
++	case ANYOF:
++		p = "ANYOF";
++		break;
++	case ANYBUT:
++		p = "ANYBUT";
++		break;
++	case BRANCH:
++		p = "BRANCH";
++		break;
++	case EXACTLY:
++		p = "EXACTLY";
++		break;
++	case NOTHING:
++		p = "NOTHING";
++		break;
++	case BACK:
++		p = "BACK";
++		break;
++	case END:
++		p = "END";
++		break;
++	case OPEN+1:
++	case OPEN+2:
++	case OPEN+3:
++	case OPEN+4:
++	case OPEN+5:
++	case OPEN+6:
++	case OPEN+7:
++	case OPEN+8:
++	case OPEN+9:
++		snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "OPEN%d", OP(op)-OPEN);
++		p = NULL;
++		break;
++	case CLOSE+1:
++	case CLOSE+2:
++	case CLOSE+3:
++	case CLOSE+4:
++	case CLOSE+5:
++	case CLOSE+6:
++	case CLOSE+7:
++	case CLOSE+8:
++	case CLOSE+9:
++		snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "CLOSE%d", OP(op)-CLOSE);
++		p = NULL;
++		break;
++	case STAR:
++		p = "STAR";
++		break;
++	case PLUS:
++		p = "PLUS";
++		break;
++	default:
++		printk("<3>Regexp: corrupted opcode\n");
++		break;
++	}
++	if (p != NULL)
++		strncat(buf, p, BUFLEN-strlen(buf));
++	return(buf);
++}
++#endif
++
++
+--- /dev/null
++++ b/net/netfilter/regexp/regexp.h
+@@ -0,0 +1,41 @@
++/*
++ * Definitions etc. for regexp(3) routines.
++ *
++ * Caveat:  this is V8 regexp(3) [actually, a reimplementation thereof],
++ * not the System V one.
++ */
++
++#ifndef REGEXP_H
++#define REGEXP_H
++
++
++/*
++http://www.opensource.apple.com/darwinsource/10.3/expect-1/expect/expect.h ,
++which contains a version of this library, says:
++
++ *
++ * NSUBEXP must be at least 10, and no greater than 117 or the parser
++ * will not work properly.
++ *
++
++However, it looks rather like this library is limited to 10.  If you think
++otherwise, let us know.
++*/
++
++#define NSUBEXP  10
++typedef struct regexp {
++	char *startp[NSUBEXP];
++	char *endp[NSUBEXP];
++	char regstart;		/* Internal use only. */
++	char reganch;		/* Internal use only. */
++	char *regmust;		/* Internal use only. */
++	int regmlen;		/* Internal use only. */
++	char program[1];	/* Unwarranted chumminess with compiler. */
++} regexp;
++
++regexp * regcomp(char *exp, int *patternsize);
++int regexec(regexp *prog, char *string);
++void regsub(regexp *prog, char *source, char *dest);
++void regerror(char *s);
++
++#endif
+--- /dev/null
++++ b/net/netfilter/regexp/regmagic.h
+@@ -0,0 +1,5 @@
++/*
++ * The first byte of the regexp internal "program" is actually this magic
++ * number; the start node begins in the second byte.
++ */
++#define	MAGIC	0234
+--- /dev/null
++++ b/net/netfilter/regexp/regsub.c
+@@ -0,0 +1,95 @@
++/*
++ * regsub
++ * @(#)regsub.c	1.3 of 2 April 86
++ *
++ *	Copyright (c) 1986 by University of Toronto.
++ *	Written by Henry Spencer.  Not derived from licensed software.
++ *
++ *	Permission is granted to anyone to use this software for any
++ *	purpose on any computer system, and to redistribute it freely,
++ *	subject to the following restrictions:
++ *
++ *	1. The author is not responsible for the consequences of use of
++ *		this software, no matter how awful, even if they arise
++ *		from defects in it.
++ *
++ *	2. The origin of this software must not be misrepresented, either
++ *		by explicit claim or by omission.
++ *
++ *	3. Altered versions must be plainly marked as such, and must not
++ *		be misrepresented as being the original software.
++ *
++ *
++ * This code was modified by Ethan Sommer to work within the kernel
++ * (it now uses kmalloc etc..)
++ *
++ */
++#include "regexp.h"
++#include "regmagic.h"
++#include <linux/string.h>
++
++
++#ifndef CHARBITS
++#define	UCHARAT(p)	((int)*(unsigned char *)(p))
++#else
++#define	UCHARAT(p)	((int)*(p)&CHARBITS)
++#endif
++
++#if 0
++//void regerror(char * s)
++//{
++//        printk("regexp(3): %s", s);
++//        /* NOTREACHED */
++//}
++#endif
++
++/*
++ - regsub - perform substitutions after a regexp match
++ */
++void
++regsub(regexp * prog, char * source, char * dest)
++{
++	register char *src;
++	register char *dst;
++	register char c;
++	register int no;
++	register int len;
++	
++	/* Not necessary and gcc doesn't like it -MLS */
++	/*extern char *strncpy();*/
++
++	if (prog == NULL || source == NULL || dest == NULL) {
++		regerror("NULL parm to regsub");
++		return;
++	}
++	if (UCHARAT(prog->program) != MAGIC) {
++		regerror("damaged regexp fed to regsub");
++		return;
++	}
++
++	src = source;
++	dst = dest;
++	while ((c = *src++) != '\0') {
++		if (c == '&')
++			no = 0;
++		else if (c == '\\' && '0' <= *src && *src <= '9')
++			no = *src++ - '0';
++		else
++			no = -1;
++
++		if (no < 0) {	/* Ordinary character. */
++			if (c == '\\' && (*src == '\\' || *src == '&'))
++				c = *src++;
++			*dst++ = c;
++		} else if (prog->startp[no] != NULL && prog->endp[no] != NULL) {
++			len = prog->endp[no] - prog->startp[no];
++			(void) strncpy(dst, prog->startp[no], len);
++			dst += len;
++			if (len != 0 && *(dst-1) == '\0') {	/* strncpy hit NUL. */
++				regerror("damaged match string");
++				return;
++			}
++		}
++	}
++	*dst++ = '\0';
++}
+--- /dev/null
++++ b/net/netfilter/xt_layer7.c
+@@ -0,0 +1,666 @@
++/*
++  Kernel module to match application layer (OSI layer 7) data in connections.
++
++  http://l7-filter.sf.net
++
++  (C) 2003-2009 Matthew Strait and Ethan Sommer.
++
++  This program is free software; you can redistribute it and/or
++  modify it under the terms of the GNU General Public License
++  as published by the Free Software Foundation; either version
++  2 of the License, or (at your option) any later version.
++  http://www.gnu.org/licenses/gpl.txt
++
++  Based on ipt_string.c (C) 2000 Emmanuel Roger <winfield@freegates.be>,
++  xt_helper.c (C) 2002 Harald Welte and cls_layer7.c (C) 2003 Matthew Strait,
++  Ethan Sommer, Justin Levandoski.
++*/
++
++#include <linux/spinlock.h>
++#include <linux/version.h>
++#include <net/ip.h>
++#include <net/tcp.h>
++#include <linux/module.h>
++#include <linux/skbuff.h>
++#include <linux/netfilter.h>
++#include <net/netfilter/nf_conntrack.h>
++#include <net/netfilter/nf_conntrack_core.h>
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)
++#include <net/netfilter/nf_conntrack_extend.h>
++#include <net/netfilter/nf_conntrack_acct.h>
++#endif
++#include <linux/netfilter/x_tables.h>
++#include <linux/netfilter/xt_layer7.h>
++#include <linux/ctype.h>
++#include <linux/proc_fs.h>
++
++#include "regexp/regexp.c"
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Matthew Strait <quadong@users.sf.net>, Ethan Sommer <sommere@users.sf.net>");
++MODULE_DESCRIPTION("iptables application layer match module");
++MODULE_ALIAS("ipt_layer7");
++MODULE_VERSION("2.21");
++
++static int maxdatalen = 2048; // this is the default
++module_param(maxdatalen, int, 0444);
++MODULE_PARM_DESC(maxdatalen, "maximum bytes of data looked at by l7-filter");
++#ifdef CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG
++	#define DPRINTK(format,args...) printk(format,##args)
++#else
++	#define DPRINTK(format,args...)
++#endif
++
++/* Number of packets whose data we look at.
++This can be modified through /proc/net/layer7_numpackets */
++static int num_packets = 10;
++
++static struct pattern_cache {
++	char * regex_string;
++	regexp * pattern;
++	struct pattern_cache * next;
++} * first_pattern_cache = NULL;
++
++DEFINE_SPINLOCK(l7_lock);
++
++static int total_acct_packets(struct nf_conn *ct)
++{
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 26)
++	BUG_ON(ct == NULL);
++	return (ct->counters[IP_CT_DIR_ORIGINAL].packets + ct->counters[IP_CT_DIR_REPLY].packets);
++#else
++	struct nf_conn_counter *acct;
++
++	BUG_ON(ct == NULL);
++	acct = nf_conn_acct_find(ct);
++	if (!acct)
++		return 0;
++	return (acct[IP_CT_DIR_ORIGINAL].packets + acct[IP_CT_DIR_REPLY].packets);
++#endif
++}
++
++#ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG
++/* Converts an unfriendly string into a friendly one by
++replacing unprintables with periods and all whitespace with " ". */
++static char * friendly_print(unsigned char * s)
++{
++	char * f = kmalloc(strlen(s) + 1, GFP_ATOMIC);
++	int i;
++
++	if(!f) {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory in "
++					"friendly_print, bailing.\n");
++		return NULL;
++	}
++
++	for(i = 0; i < strlen(s); i++){
++		if(isprint(s[i]) && s[i] < 128)	f[i] = s[i];
++		else if(isspace(s[i]))		f[i] = ' ';
++		else 				f[i] = '.';
++	}
++	f[i] = '\0';
++	return f;
++}
++
++static char dec2hex(int i)
++{
++	switch (i) {
++		case 0 ... 9:
++			return (i + '0');
++			break;
++		case 10 ... 15:
++			return (i - 10 + 'a');
++			break;
++		default:
++			if (net_ratelimit())
++				printk("layer7: Problem in dec2hex\n");
++			return '\0';
++	}
++}
++
++static char * hex_print(unsigned char * s)
++{
++	char * g = kmalloc(strlen(s)*3 + 1, GFP_ATOMIC);
++	int i;
++
++	if(!g) {
++	       if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory in hex_print, "
++					"bailing.\n");
++	       return NULL;
++	}
++
++	for(i = 0; i < strlen(s); i++) {
++		g[i*3    ] = dec2hex(s[i]/16);
++		g[i*3 + 1] = dec2hex(s[i]%16);
++		g[i*3 + 2] = ' ';
++	}
++	g[i*3] = '\0';
++
++	return g;
++}
++#endif // DEBUG
++
++/* Use instead of regcomp.  As we expect to be seeing the same regexps over and
++over again, it make sense to cache the results. */
++static regexp * compile_and_cache(const char * regex_string, 
++                                  const char * protocol)
++{
++	struct pattern_cache * node               = first_pattern_cache;
++	struct pattern_cache * last_pattern_cache = first_pattern_cache;
++	struct pattern_cache * tmp;
++	unsigned int len;
++
++	while (node != NULL) {
++		if (!strcmp(node->regex_string, regex_string))
++		return node->pattern;
++
++		last_pattern_cache = node;/* points at the last non-NULL node */
++		node = node->next;
++	}
++
++	/* If we reach the end of the list, then we have not yet cached
++	   the pattern for this regex. Let's do that now.
++	   Be paranoid about running out of memory to avoid list corruption. */
++	tmp = kmalloc(sizeof(struct pattern_cache), GFP_ATOMIC);
++
++	if(!tmp) {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory in "
++					"compile_and_cache, bailing.\n");
++		return NULL;
++	}
++
++	tmp->regex_string  = kmalloc(strlen(regex_string) + 1, GFP_ATOMIC);
++	tmp->pattern       = kmalloc(sizeof(struct regexp),    GFP_ATOMIC);
++	tmp->next = NULL;
++
++	if(!tmp->regex_string || !tmp->pattern) {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory in "
++					"compile_and_cache, bailing.\n");
++		kfree(tmp->regex_string);
++		kfree(tmp->pattern);
++		kfree(tmp);
++		return NULL;
++	}
++
++	/* Ok.  The new node is all ready now. */
++	node = tmp;
++
++	if(first_pattern_cache == NULL) /* list is empty */
++		first_pattern_cache = node; /* make node the beginning */
++	else
++		last_pattern_cache->next = node; /* attach node to the end */
++
++	/* copy the string and compile the regex */
++	len = strlen(regex_string);
++	DPRINTK("About to compile this: \"%s\"\n", regex_string);
++	node->pattern = regcomp((char *)regex_string, &len);
++	if ( !node->pattern ) {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: Error compiling regexp "
++					"\"%s\" (%s)\n", 
++					regex_string, protocol);
++		/* pattern is now cached as NULL, so we won't try again. */
++	}
++
++	strcpy(node->regex_string, regex_string);
++	return node->pattern;
++}
++
++static int can_handle(const struct sk_buff *skb)
++{
++	if(!ip_hdr(skb)) /* not IP */
++		return 0;
++	if(ip_hdr(skb)->protocol != IPPROTO_TCP &&
++	   ip_hdr(skb)->protocol != IPPROTO_UDP &&
++	   ip_hdr(skb)->protocol != IPPROTO_ICMP)
++		return 0;
++	return 1;
++}
++
++/* Returns offset the into the skb->data that the application data starts */
++static int app_data_offset(const struct sk_buff *skb)
++{
++	/* In case we are ported somewhere (ebtables?) where ip_hdr(skb)
++	isn't set, this can be gotten from 4*(skb->data[0] & 0x0f) as well. */
++	int ip_hl = 4*ip_hdr(skb)->ihl;
++
++	if( ip_hdr(skb)->protocol == IPPROTO_TCP ) {
++		/* 12 == offset into TCP header for the header length field.
++		Can't get this with skb->h.th->doff because the tcphdr
++		struct doesn't get set when routing (this is confirmed to be
++		true in Netfilter as well as QoS.) */
++		int tcp_hl = 4*(skb->data[ip_hl + 12] >> 4);
++
++		return ip_hl + tcp_hl;
++	} else if( ip_hdr(skb)->protocol == IPPROTO_UDP  ) {
++		return ip_hl + 8; /* UDP header is always 8 bytes */
++	} else if( ip_hdr(skb)->protocol == IPPROTO_ICMP ) {
++		return ip_hl + 8; /* ICMP header is 8 bytes */
++	} else {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: tried to handle unknown "
++					"protocol!\n");
++		return ip_hl + 8; /* something reasonable */
++	}
++}
++
++/* handles whether there's a match when we aren't appending data anymore */
++static int match_no_append(struct nf_conn * conntrack, 
++                           struct nf_conn * master_conntrack, 
++                           enum ip_conntrack_info ctinfo,
++                           enum ip_conntrack_info master_ctinfo,
++                           const struct xt_layer7_info * info)
++{
++	/* If we're in here, throw the app data away */
++	if(master_conntrack->layer7.app_data != NULL) {
++
++	#ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG
++		if(!master_conntrack->layer7.app_proto) {
++			char * f = 
++			  friendly_print(master_conntrack->layer7.app_data);
++			char * g = 
++			  hex_print(master_conntrack->layer7.app_data);
++			DPRINTK("\nl7-filter gave up after %d bytes "
++				"(%d packets):\n%s\n",
++				strlen(f), total_acct_packets(master_conntrack), f);
++			kfree(f);
++			DPRINTK("In hex: %s\n", g);
++			kfree(g);
++		}
++	#endif
++
++		kfree(master_conntrack->layer7.app_data);
++		master_conntrack->layer7.app_data = NULL; /* don't free again */
++	}
++
++	if(master_conntrack->layer7.app_proto){
++		/* Here child connections set their .app_proto (for /proc) */
++		if(!conntrack->layer7.app_proto) {
++			conntrack->layer7.app_proto = 
++			  kmalloc(strlen(master_conntrack->layer7.app_proto)+1, 
++			    GFP_ATOMIC);
++			if(!conntrack->layer7.app_proto){
++				if (net_ratelimit())
++					printk(KERN_ERR "layer7: out of memory "
++							"in match_no_append, "
++							"bailing.\n");
++				return 1;
++			}
++			strcpy(conntrack->layer7.app_proto, 
++				master_conntrack->layer7.app_proto);
++		}
++
++		return (!strcmp(master_conntrack->layer7.app_proto, 
++				info->protocol));
++	}
++	else {
++		/* If not classified, set to "unknown" to distinguish from
++		connections that are still being tested. */
++		master_conntrack->layer7.app_proto = 
++			kmalloc(strlen("unknown")+1, GFP_ATOMIC);
++		if(!master_conntrack->layer7.app_proto){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: out of memory in "
++						"match_no_append, bailing.\n");
++			return 1;
++		}
++		strcpy(master_conntrack->layer7.app_proto, "unknown");
++		return 0;
++	}
++}
++
++/* add the new app data to the conntrack.  Return number of bytes added. */
++static int add_data(struct nf_conn * master_conntrack,
++                    char * app_data, int appdatalen)
++{
++	int length = 0, i;
++	int oldlength = master_conntrack->layer7.app_data_len;
++
++	/* This is a fix for a race condition by Deti Fliegl. However, I'm not 
++	   clear on whether the race condition exists or whether this really 
++	   fixes it.  I might just be being dense... Anyway, if it's not really 
++	   a fix, all it does is waste a very small amount of time. */
++	if(!master_conntrack->layer7.app_data) return 0;
++
++	/* Strip nulls. Make everything lower case (our regex lib doesn't
++	do case insensitivity).  Add it to the end of the current data. */
++	for(i = 0; i < maxdatalen-oldlength-1 &&
++		   i < appdatalen; i++) {
++		if(app_data[i] != '\0') {
++			/* the kernel version of tolower mungs 'upper ascii' */
++			master_conntrack->layer7.app_data[length+oldlength] =
++				isascii(app_data[i])? 
++					tolower(app_data[i]) : app_data[i];
++			length++;
++		}
++	}
++
++	master_conntrack->layer7.app_data[length+oldlength] = '\0';
++	master_conntrack->layer7.app_data_len = length + oldlength;
++
++	return length;
++}
++
++/* taken from drivers/video/modedb.c */
++static int my_atoi(const char *s)
++{
++	int val = 0;
++
++	for (;; s++) {
++		switch (*s) {
++			case '0'...'9':
++			val = 10*val+(*s-'0');
++			break;
++		default:
++			return val;
++		}
++	}
++}
++
++/* write out num_packets to userland. */
++static int layer7_read_proc(char* page, char ** start, off_t off, int count,
++                            int* eof, void * data)
++{
++	if(num_packets > 99 && net_ratelimit())
++		printk(KERN_ERR "layer7: NOT REACHED. num_packets too big\n");
++
++	page[0] = num_packets/10 + '0';
++	page[1] = num_packets%10 + '0';
++	page[2] = '\n';
++	page[3] = '\0';
++
++	*eof=1;
++
++	return 3;
++}
++
++/* Read in num_packets from userland */
++static int layer7_write_proc(struct file* file, const char* buffer,
++                             unsigned long count, void *data)
++{
++	char * foo = kmalloc(count, GFP_ATOMIC);
++
++	if(!foo){
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory, bailing. "
++					"num_packets unchanged.\n");
++		return count;
++	}
++
++	if(copy_from_user(foo, buffer, count)) {
++		return -EFAULT;
++	}
++
++
++	num_packets = my_atoi(foo);
++	kfree (foo);
++
++	/* This has an arbitrary limit to make the math easier. I'm lazy.
++	But anyway, 99 is a LOT! If you want more, you're doing it wrong! */
++	if(num_packets > 99) {
++		printk(KERN_WARNING "layer7: num_packets can't be > 99.\n");
++		num_packets = 99;
++	} else if(num_packets < 1) {
++		printk(KERN_WARNING "layer7: num_packets can't be < 1.\n");
++		num_packets = 1;
++	}
++
++	return count;
++}
++
++static bool
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++match(const struct sk_buff *skbin, const struct xt_match_param *par)
++#else
++match(const struct sk_buff *skbin,
++      const struct net_device *in,
++      const struct net_device *out,
++      const struct xt_match *match,
++      const void *matchinfo,
++      int offset,
++      unsigned int protoff,
++      bool *hotdrop)
++#endif
++{
++	/* sidestep const without getting a compiler warning... */
++	struct sk_buff * skb = (struct sk_buff *)skbin; 
++
++	const struct xt_layer7_info * info = 
++	#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++		par->matchinfo;
++	#else
++		matchinfo;
++	#endif
++
++	enum ip_conntrack_info master_ctinfo, ctinfo;
++	struct nf_conn *master_conntrack, *conntrack;
++	unsigned char * app_data;
++	unsigned int pattern_result, appdatalen;
++	regexp * comppattern;
++
++	/* Be paranoid/incompetent - lock the entire match function. */
++	spin_lock_bh(&l7_lock);
++
++	if(!can_handle(skb)){
++		DPRINTK("layer7: This is some protocol I can't handle.\n");
++		spin_unlock_bh(&l7_lock);
++		return info->invert;
++	}
++
++	/* Treat parent & all its children together as one connection, except
++	for the purpose of setting conntrack->layer7.app_proto in the actual
++	connection. This makes /proc/net/ip_conntrack more satisfying. */
++	if(!(conntrack = nf_ct_get(skb, &ctinfo)) ||
++	   !(master_conntrack=nf_ct_get(skb,&master_ctinfo))){
++		DPRINTK("layer7: couldn't get conntrack.\n");
++		spin_unlock_bh(&l7_lock);
++		return info->invert;
++	}
++
++	/* Try to get a master conntrack (and its master etc) for FTP, etc. */
++	while (master_ct(master_conntrack) != NULL)
++		master_conntrack = master_ct(master_conntrack);
++
++	/* if we've classified it or seen too many packets */
++	if(total_acct_packets(master_conntrack) > num_packets ||
++	   master_conntrack->layer7.app_proto) {
++
++		pattern_result = match_no_append(conntrack, master_conntrack, 
++						 ctinfo, master_ctinfo, info);
++
++		/* skb->cb[0] == seen. Don't do things twice if there are 
++		multiple l7 rules. I'm not sure that using cb for this purpose 
++		is correct, even though it says "put your private variables 
++		there". But it doesn't look like it is being used for anything
++		else in the skbs that make it here. */
++		skb->cb[0] = 1; /* marking it seen here's probably irrelevant */
++
++		spin_unlock_bh(&l7_lock);
++		return (pattern_result ^ info->invert);
++	}
++
++	if(skb_is_nonlinear(skb)){
++		if(skb_linearize(skb) != 0){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: failed to linearize "
++						"packet, bailing.\n");
++			spin_unlock_bh(&l7_lock);
++			return info->invert;
++		}
++	}
++
++	/* now that the skb is linearized, it's safe to set these. */
++	app_data = skb->data + app_data_offset(skb);
++	appdatalen = skb_tail_pointer(skb) - app_data;
++
++	/* the return value gets checked later, when we're ready to use it */
++	comppattern = compile_and_cache(info->pattern, info->protocol);
++
++	/* On the first packet of a connection, allocate space for app data */
++	if(total_acct_packets(master_conntrack) == 1 && !skb->cb[0] && 
++	   !master_conntrack->layer7.app_data){
++		master_conntrack->layer7.app_data = 
++			kmalloc(maxdatalen, GFP_ATOMIC);
++		if(!master_conntrack->layer7.app_data){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: out of memory in "
++						"match, bailing.\n");
++			spin_unlock_bh(&l7_lock);
++			return info->invert;
++		}
++
++		master_conntrack->layer7.app_data[0] = '\0';
++	}
++
++	/* Can be here, but unallocated, if numpackets is increased near
++	the beginning of a connection */
++	if(master_conntrack->layer7.app_data == NULL){
++		spin_unlock_bh(&l7_lock);
++		return info->invert; /* unmatched */
++	}
++
++	if(!skb->cb[0]){
++		int newbytes;
++		newbytes = add_data(master_conntrack, app_data, appdatalen);
++
++		if(newbytes == 0) { /* didn't add any data */
++			skb->cb[0] = 1;
++			/* Didn't match before, not going to match now */
++			spin_unlock_bh(&l7_lock);
++			return info->invert;
++		}
++	}
++
++	/* If looking for "unknown", then never match.  "Unknown" means that
++	we've given up; we're still trying with these packets. */
++	if(!strcmp(info->protocol, "unknown")) {
++		pattern_result = 0;
++	/* If looking for "unset", then always match. "Unset" means that we
++	haven't yet classified the connection. */
++	} else if(!strcmp(info->protocol, "unset")) {
++		pattern_result = 2;
++		DPRINTK("layer7: matched unset: not yet classified "
++			"(%d/%d packets)\n",
++                        total_acct_packets(master_conntrack), num_packets);
++	/* If the regexp failed to compile, don't bother running it */
++	} else if(comppattern && 
++		  regexec(comppattern, master_conntrack->layer7.app_data)){
++		DPRINTK("layer7: matched %s\n", info->protocol);
++		pattern_result = 1;
++	} else pattern_result = 0;
++
++	if(pattern_result == 1) {
++		master_conntrack->layer7.app_proto = 
++			kmalloc(strlen(info->protocol)+1, GFP_ATOMIC);
++		if(!master_conntrack->layer7.app_proto){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: out of memory in "
++						"match, bailing.\n");
++			spin_unlock_bh(&l7_lock);
++			return (pattern_result ^ info->invert);
++		}
++		strcpy(master_conntrack->layer7.app_proto, info->protocol);
++	} else if(pattern_result > 1) { /* cleanup from "unset" */
++		pattern_result = 1;
++	}
++
++	/* mark the packet seen */
++	skb->cb[0] = 1;
++
++	spin_unlock_bh(&l7_lock);
++	return (pattern_result ^ info->invert);
++}
++
++// load nf_conntrack_ipv4
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++static bool check(const struct xt_mtchk_param *par)
++{
++        if (nf_ct_l3proto_try_module_get(par->match->family) < 0) {
++                printk(KERN_WARNING "can't load conntrack support for "
++                                    "proto=%d\n", par->match->family);
++#else
++static bool check(const char *tablename, const void *inf,
++		 const struct xt_match *match, void *matchinfo,
++		 unsigned int hook_mask)
++{
++        if (nf_ct_l3proto_try_module_get(match->family) < 0) {
++                printk(KERN_WARNING "can't load conntrack support for "
++                                    "proto=%d\n", match->family);
++#endif
++                return 0;
++        }
++	return 1;
++}
++
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++	static void destroy(const struct xt_mtdtor_param *par)
++	{
++		nf_ct_l3proto_module_put(par->match->family);
++	}
++#else
++	static void destroy(const struct xt_match *match, void *matchinfo)
++	{
++		nf_ct_l3proto_module_put(match->family);
++	}
++#endif
++
++static struct xt_match xt_layer7_match[] __read_mostly = {
++{
++	.name		= "layer7",
++	.family		= AF_INET,
++	.checkentry	= check,
++	.match		= match,
++	.destroy	= destroy,
++	.matchsize	= sizeof(struct xt_layer7_info),
++	.me		= THIS_MODULE
++}
++};
++
++static void layer7_cleanup_proc(void)
++{
++	remove_proc_entry("layer7_numpackets", init_net.proc_net);
++}
++
++/* register the proc file */
++static void layer7_init_proc(void)
++{
++	struct proc_dir_entry* entry;
++	entry = create_proc_entry("layer7_numpackets", 0644, init_net.proc_net);
++	entry->read_proc = layer7_read_proc;
++	entry->write_proc = layer7_write_proc;
++}
++
++static int __init xt_layer7_init(void)
++{
++	need_conntrack();
++
++	layer7_init_proc();
++	if(maxdatalen < 1) {
++		printk(KERN_WARNING "layer7: maxdatalen can't be < 1, "
++			"using 1\n");
++		maxdatalen = 1;
++	}
++	/* This is not a hard limit.  It's just here to prevent people from
++	bringing their slow machines to a grinding halt. */
++	else if(maxdatalen > 65536) {
++		printk(KERN_WARNING "layer7: maxdatalen can't be > 65536, "
++			"using 65536\n");
++		maxdatalen = 65536;
++	}
++	return xt_register_matches(xt_layer7_match,
++				   ARRAY_SIZE(xt_layer7_match));
++}
++
++static void __exit xt_layer7_fini(void)
++{
++	layer7_cleanup_proc();
++	xt_unregister_matches(xt_layer7_match, ARRAY_SIZE(xt_layer7_match));
++}
++
++module_init(xt_layer7_init);
++module_exit(xt_layer7_fini);
diff --git a/target/linux/generic/patches-2.6.31/101-netfilter_layer7_pktmatch.patch b/target/linux/generic/patches-2.6.31/101-netfilter_layer7_pktmatch.patch
new file mode 100644
index 0000000000..f65e301fd1
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/101-netfilter_layer7_pktmatch.patch
@@ -0,0 +1,108 @@
+--- a/include/linux/netfilter/xt_layer7.h
++++ b/include/linux/netfilter/xt_layer7.h
+@@ -8,6 +8,7 @@ struct xt_layer7_info {
+     char protocol[MAX_PROTOCOL_LEN];
+     char pattern[MAX_PATTERN_LEN];
+     u_int8_t invert;
++    u_int8_t pkt;
+ };
+ 
+ #endif /* _XT_LAYER7_H */
+--- a/net/netfilter/xt_layer7.c
++++ b/net/netfilter/xt_layer7.c
+@@ -314,33 +314,35 @@ static int match_no_append(struct nf_con
+ }
+ 
+ /* add the new app data to the conntrack.  Return number of bytes added. */
+-static int add_data(struct nf_conn * master_conntrack,
+-                    char * app_data, int appdatalen)
++static int add_datastr(char *target, int offset, char *app_data, int len)
+ {
+ 	int length = 0, i;
+-	int oldlength = master_conntrack->layer7.app_data_len;
+-
+-	/* This is a fix for a race condition by Deti Fliegl. However, I'm not 
+-	   clear on whether the race condition exists or whether this really 
+-	   fixes it.  I might just be being dense... Anyway, if it's not really 
+-	   a fix, all it does is waste a very small amount of time. */
+-	if(!master_conntrack->layer7.app_data) return 0;
++	if (!target) return 0;
+ 
+ 	/* Strip nulls. Make everything lower case (our regex lib doesn't
+ 	do case insensitivity).  Add it to the end of the current data. */
+-	for(i = 0; i < maxdatalen-oldlength-1 &&
+-		   i < appdatalen; i++) {
++ 	for(i = 0; i < maxdatalen-offset-1 && i < len; i++) {
+ 		if(app_data[i] != '\0') {
+ 			/* the kernel version of tolower mungs 'upper ascii' */
+-			master_conntrack->layer7.app_data[length+oldlength] =
++			target[length+offset] =
+ 				isascii(app_data[i])? 
+ 					tolower(app_data[i]) : app_data[i];
+ 			length++;
+ 		}
+ 	}
++	target[length+offset] = '\0';
++
++	return length;
++}
++
++/* add the new app data to the conntrack.  Return number of bytes added. */
++static int add_data(struct nf_conn * master_conntrack,
++                    char * app_data, int appdatalen)
++{
++	int length;
+ 
+-	master_conntrack->layer7.app_data[length+oldlength] = '\0';
+-	master_conntrack->layer7.app_data_len = length + oldlength;
++	length = add_datastr(master_conntrack->layer7.app_data, master_conntrack->layer7.app_data_len, app_data, appdatalen);
++	master_conntrack->layer7.app_data_len += length;
+ 
+ 	return length;
+ }
+@@ -438,7 +440,7 @@ match(const struct sk_buff *skbin,
+ 
+ 	enum ip_conntrack_info master_ctinfo, ctinfo;
+ 	struct nf_conn *master_conntrack, *conntrack;
+-	unsigned char * app_data;
++	unsigned char *app_data, *tmp_data;
+ 	unsigned int pattern_result, appdatalen;
+ 	regexp * comppattern;
+ 
+@@ -466,8 +468,8 @@ match(const struct sk_buff *skbin,
+ 		master_conntrack = master_ct(master_conntrack);
+ 
+ 	/* if we've classified it or seen too many packets */
+-	if(total_acct_packets(master_conntrack) > num_packets ||
+-	   master_conntrack->layer7.app_proto) {
++	if(!info->pkt && (total_acct_packets(master_conntrack) > num_packets ||
++	   master_conntrack->layer7.app_proto)) {
+ 
+ 		pattern_result = match_no_append(conntrack, master_conntrack, 
+ 						 ctinfo, master_ctinfo, info);
+@@ -500,6 +502,25 @@ match(const struct sk_buff *skbin,
+ 	/* the return value gets checked later, when we're ready to use it */
+ 	comppattern = compile_and_cache(info->pattern, info->protocol);
+ 
++	if (info->pkt) {
++		tmp_data = kmalloc(maxdatalen, GFP_ATOMIC);
++		if(!tmp_data){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: out of memory in match, bailing.\n");
++			return info->invert;
++		}
++
++		tmp_data[0] = '\0';
++		add_datastr(tmp_data, 0, app_data, appdatalen);
++		pattern_result = ((comppattern && regexec(comppattern, tmp_data)) ? 1 : 0);
++
++		kfree(tmp_data);
++		tmp_data = NULL;
++		spin_unlock_bh(&l7_lock);
++
++		return (pattern_result ^ info->invert);
++	}
++
+ 	/* On the first packet of a connection, allocate space for app data */
+ 	if(total_acct_packets(master_conntrack) == 1 && !skb->cb[0] && 
+ 	   !master_conntrack->layer7.app_data){
diff --git a/target/linux/generic/patches-2.6.31/110-netfilter_match_speedup.patch b/target/linux/generic/patches-2.6.31/110-netfilter_match_speedup.patch
new file mode 100644
index 0000000000..bcc1878c9e
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/110-netfilter_match_speedup.patch
@@ -0,0 +1,144 @@
+--- a/include/linux/netfilter_ipv4/ip_tables.h
++++ b/include/linux/netfilter_ipv4/ip_tables.h
+@@ -62,6 +62,7 @@ struct ipt_ip {
+ #define IPT_F_FRAG		0x01	/* Set if rule is a fragment rule */
+ #define IPT_F_GOTO		0x02	/* Set if jump is a goto */
+ #define IPT_F_MASK		0x03	/* All possible flag bits mask. */
++#define IPT_F_NO_DEF_MATCH	0x80	/* Internal: no default match rules present */
+ 
+ /* Values for "inv" field in struct ipt_ip. */
+ #define IPT_INV_VIA_IN		0x01	/* Invert the sense of IN IFACE. */
+--- a/net/ipv4/netfilter/ip_tables.c
++++ b/net/ipv4/netfilter/ip_tables.c
+@@ -87,6 +87,9 @@ ip_packet_match(const struct iphdr *ip,
+ 
+ #define FWINV(bool, invflg) ((bool) ^ !!(ipinfo->invflags & (invflg)))
+ 
++	if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
++		return true;
++
+ 	if (FWINV((ip->saddr&ipinfo->smsk.s_addr) != ipinfo->src.s_addr,
+ 		  IPT_INV_SRCIP)
+ 	    || FWINV((ip->daddr&ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr,
+@@ -137,13 +140,35 @@ ip_packet_match(const struct iphdr *ip,
+ 		return false;
+ 	}
+ 
++#undef FWINV
+ 	return true;
+ }
+ 
+ static bool
+-ip_checkentry(const struct ipt_ip *ip)
++ip_checkentry(struct ipt_ip *ip)
+ {
+-	if (ip->flags & ~IPT_F_MASK) {
++#define FWINV(bool, invflg) ((bool) || (ip->invflags & (invflg)))
++
++	if (FWINV(ip->smsk.s_addr, IPT_INV_SRCIP) ||
++		FWINV(ip->dmsk.s_addr, IPT_INV_DSTIP))
++		goto has_match_rules;
++
++	if (FWINV(!!((const unsigned long *)ip->iniface_mask)[0],
++		IPT_INV_VIA_IN) ||
++	    FWINV(!!((const unsigned long *)ip->outiface_mask)[0],
++		IPT_INV_VIA_OUT))
++		goto has_match_rules;
++
++	if (FWINV(ip->proto, IPT_INV_PROTO))
++		goto has_match_rules;
++
++	if (FWINV(ip->flags&IPT_F_FRAG, IPT_INV_FRAG))
++		goto has_match_rules;
++
++	ip->flags |= IPT_F_NO_DEF_MATCH;
++
++has_match_rules:
++	if (ip->flags & ~(IPT_F_MASK|IPT_F_NO_DEF_MATCH)) {
+ 		duprintf("Unknown flag bits set: %08X\n",
+ 			 ip->flags & ~IPT_F_MASK);
+ 		return false;
+@@ -153,6 +178,8 @@ ip_checkentry(const struct ipt_ip *ip)
+ 			 ip->invflags & ~IPT_INV_MASK);
+ 		return false;
+ 	}
++
++#undef FWINV
+ 	return true;
+ }
+ 
+@@ -200,7 +227,6 @@ unconditional(const struct ipt_ip *ip)
+ 			return 0;
+ 
+ 	return 1;
+-#undef FWINV
+ }
+ 
+ #if defined(CONFIG_NETFILTER_XT_TARGET_TRACE) || \
+@@ -326,8 +352,28 @@ ipt_do_table(struct sk_buff *skb,
+ 	struct xt_match_param mtpar;
+ 	struct xt_target_param tgpar;
+ 
+-	/* Initialization */
+ 	ip = ip_hdr(skb);
++
++	IP_NF_ASSERT(table->valid_hooks & (1 << hook));
++	xt_info_rdlock_bh();
++	private = table->private;
++	table_base = private->entries[smp_processor_id()];
++	e = get_entry(table_base, private->hook_entry[hook]);
++
++	if (e->target_offset <= sizeof(struct ipt_entry) &&
++		(e->ip.flags & IPT_F_NO_DEF_MATCH)) {
++			struct ipt_entry_target *t = ipt_get_target(e);
++			if (!t->u.kernel.target->target) {
++				int v = ((struct ipt_standard_target *)t)->verdict;
++				if ((v < 0) && (v != IPT_RETURN)) {
++					ADD_COUNTER(e->counters, ntohs(ip->tot_len), 1);
++					xt_info_rdunlock_bh();
++					return (unsigned)(-v) - 1;
++				}
++			}
++	}
++
++	/* Initialization */
+ 	datalen = skb->len - ip->ihl * 4;
+ 	indev = in ? in->name : nulldevname;
+ 	outdev = out ? out->name : nulldevname;
+@@ -345,13 +391,6 @@ ipt_do_table(struct sk_buff *skb,
+ 	mtpar.family  = tgpar.family = NFPROTO_IPV4;
+ 	mtpar.hooknum = tgpar.hooknum = hook;
+ 
+-	IP_NF_ASSERT(table->valid_hooks & (1 << hook));
+-	xt_info_rdlock_bh();
+-	private = table->private;
+-	table_base = private->entries[smp_processor_id()];
+-
+-	e = get_entry(table_base, private->hook_entry[hook]);
+-
+ 	/* For return from builtin chain */
+ 	back = get_entry(table_base, private->underflow[hook]);
+ 
+@@ -978,6 +1017,7 @@ copy_entries_to_user(unsigned int total_
+ 		unsigned int i;
+ 		const struct ipt_entry_match *m;
+ 		const struct ipt_entry_target *t;
++		u8 flags;
+ 
+ 		e = (struct ipt_entry *)(loc_cpu_entry + off);
+ 		if (copy_to_user(userptr + off
+@@ -987,6 +1027,14 @@ copy_entries_to_user(unsigned int total_
+ 			ret = -EFAULT;
+ 			goto free_counters;
+ 		}
++
++		flags = e->ip.flags & ~IPT_F_NO_DEF_MATCH;
++		if (copy_to_user(userptr + off
++				 + offsetof(struct ipt_entry, ip.flags),
++				 &flags, sizeof(flags)) != 0) {
++			ret = -EFAULT;
++			goto free_counters;
++		}
+ 
+ 		for (i = sizeof(struct ipt_entry);
+ 		     i < e->target_offset;
diff --git a/target/linux/generic/patches-2.6.31/150-netfilter_imq.patch b/target/linux/generic/patches-2.6.31/150-netfilter_imq.patch
new file mode 100644
index 0000000000..ffe80b33b4
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/150-netfilter_imq.patch
@@ -0,0 +1,1260 @@
+--- /dev/null
++++ b/drivers/net/imq.c
+@@ -0,0 +1,571 @@
++/*
++ *             Pseudo-driver for the intermediate queue device.
++ *
++ *             This program is free software; you can redistribute it and/or
++ *             modify it under the terms of the GNU General Public License
++ *             as published by the Free Software Foundation; either version
++ *             2 of the License, or (at your option) any later version.
++ *
++ * Authors:    Patrick McHardy, <kaber@trash.net>
++ *
++ *            The first version was written by Martin Devera, <devik@cdi.cz>
++ *
++ * Credits:    Jan Rafaj <imq2t@cedric.vabo.cz>
++ *              - Update patch to 2.4.21
++ *             Sebastian Strollo <sstrollo@nortelnetworks.com>
++ *              - Fix "Dead-loop on netdevice imq"-issue
++ *             Marcel Sebek <sebek64@post.cz>
++ *              - Update to 2.6.2-rc1
++ *
++ *	       After some time of inactivity there is a group taking care
++ *	       of IMQ again: http://www.linuximq.net
++ *
++ *
++ *	       2004/06/30 - New version of IMQ patch to kernels <=2.6.7
++ *             including the following changes:
++ *
++ *	       - Correction of ipv6 support "+"s issue (Hasso Tepper)
++ *	       - Correction of imq_init_devs() issue that resulted in
++ *	       kernel OOPS unloading IMQ as module (Norbert Buchmuller)
++ *	       - Addition of functionality to choose number of IMQ devices
++ *	       during kernel config (Andre Correa)
++ *	       - Addition of functionality to choose how IMQ hooks on
++ *	       PRE and POSTROUTING (after or before NAT) (Andre Correa)
++ *	       - Cosmetic corrections (Norbert Buchmuller) (Andre Correa)
++ *
++ *
++ *             2005/12/16 - IMQ versions between 2.6.7 and 2.6.13 were
++ *             released with almost no problems. 2.6.14-x was released
++ *             with some important changes: nfcache was removed; After
++ *             some weeks of trouble we figured out that some IMQ fields
++ *             in skb were missing in skbuff.c - skb_clone and copy_skb_header.
++ *             These functions are correctly patched by this new patch version.
++ *
++ *             Thanks for all who helped to figure out all the problems with
++ *             2.6.14.x: Patrick McHardy, Rune Kock, VeNoMouS, Max CtRiX,
++ *             Kevin Shanahan, Richard Lucassen, Valery Dachev (hopefully
++ *             I didn't forget anybody). I apologize again for my lack of time.
++ *
++ *
++ *             2008/06/17 - 2.6.25 - Changed imq.c to use qdisc_run() instead
++ *             of qdisc_restart() and moved qdisc_run() to tasklet to avoid
++ *             recursive locking. New initialization routines to fix 'rmmod' not
++ *             working anymore. Used code from ifb.c. (Jussi Kivilinna)
++ *
++ *             2008/08/06 - 2.6.26 - (JK)
++ *              - Replaced tasklet with 'netif_schedule()'.
++ *              - Cleaned up and added comments for imq_nf_queue().
++ *
++ *             2009/04/12
++ *              - Add skb_save_cb/skb_restore_cb helper functions for backuping
++ *                control buffer. This is needed because qdisc-layer on kernels
++ *                2.6.27 and newer overwrite control buffer. (Jussi Kivilinna)
++ *              - Add better locking for IMQ device. Hopefully this will solve
++ *                SMP issues. (Jussi Kivilinna)
++ *              - Port to 2.6.27
++ *              - Port to 2.6.28
++ *              - Port to 2.6.29 + fix rmmod not working
++ *
++ *             2009/04/20 - (Jussi Kivilinna)
++ *              - Use netdevice feature flags to avoid extra packet handling
++ *                by core networking layer and possibly increase performance.
++ *
++ *	       Also, many thanks to pablo Sebastian Greco for making the initial
++ *	       patch and to those who helped the testing.
++ *
++ *             More info at: http://www.linuximq.net/ (Andre Correa)
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/moduleparam.h>
++#include <linux/list.h>
++#include <linux/skbuff.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/rtnetlink.h>
++#include <linux/if_arp.h>
++#include <linux/netfilter.h>
++#include <linux/netfilter_ipv4.h>
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++	#include <linux/netfilter_ipv6.h>
++#endif
++#include <linux/imq.h>
++#include <net/pkt_sched.h>
++#include <net/netfilter/nf_queue.h>
++
++static nf_hookfn imq_nf_hook;
++
++static struct nf_hook_ops imq_ingress_ipv4 = {
++	.hook		= imq_nf_hook,
++	.owner		= THIS_MODULE,
++	.pf		= PF_INET,
++	.hooknum	= NF_INET_PRE_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++	.priority	= NF_IP_PRI_MANGLE + 1
++#else
++	.priority	= NF_IP_PRI_NAT_DST + 1
++#endif
++};
++
++static struct nf_hook_ops imq_egress_ipv4 = {
++	.hook		= imq_nf_hook,
++	.owner		= THIS_MODULE,
++	.pf		= PF_INET,
++	.hooknum	= NF_INET_POST_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_AA) || defined(CONFIG_IMQ_BEHAVIOR_BA)
++	.priority	= NF_IP_PRI_LAST
++#else
++	.priority	= NF_IP_PRI_NAT_SRC - 1
++#endif
++};
++
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++static struct nf_hook_ops imq_ingress_ipv6 = {
++	.hook		= imq_nf_hook,
++	.owner		= THIS_MODULE,
++	.pf		= PF_INET6,
++	.hooknum	= NF_INET_PRE_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++	.priority	= NF_IP6_PRI_MANGLE + 1
++#else
++	.priority	= NF_IP6_PRI_NAT_DST + 1
++#endif
++};
++
++static struct nf_hook_ops imq_egress_ipv6 = {
++	.hook		= imq_nf_hook,
++	.owner		= THIS_MODULE,
++	.pf		= PF_INET6,
++	.hooknum	= NF_INET_POST_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_AA) || defined(CONFIG_IMQ_BEHAVIOR_BA)
++	.priority	= NF_IP6_PRI_LAST
++#else
++	.priority	= NF_IP6_PRI_NAT_SRC - 1
++#endif
++};
++#endif
++
++#if defined(CONFIG_IMQ_NUM_DEVS)
++static unsigned int numdevs = CONFIG_IMQ_NUM_DEVS;
++#else
++static unsigned int numdevs = IMQ_MAX_DEVS;
++#endif
++
++static DEFINE_SPINLOCK(imq_nf_queue_lock);
++
++static struct net_device *imq_devs_cache[IMQ_MAX_DEVS];
++
++
++static struct net_device_stats *imq_get_stats(struct net_device *dev)
++{
++	return &dev->stats;
++}
++
++/* called for packets kfree'd in qdiscs at places other than enqueue */
++static void imq_skb_destructor(struct sk_buff *skb)
++{
++	struct nf_queue_entry *entry = skb->nf_queue_entry;
++
++	if (entry) {
++		nf_queue_entry_release_refs(entry);
++		kfree(entry);
++	}
++
++	skb_restore_cb(skb); /* kfree backup */
++}
++
++static void imq_nf_reinject(struct nf_queue_entry *entry, unsigned int verdict)
++{
++	int status;
++
++	if (!entry->next_outfn) {
++		spin_lock_bh(&imq_nf_queue_lock);
++		nf_reinject(entry, verdict);
++		spin_unlock_bh(&imq_nf_queue_lock);
++		return;
++	}
++
++	rcu_read_lock();
++	local_bh_disable();
++	status = entry->next_outfn(entry, entry->next_queuenum);
++	local_bh_enable();
++	if (status < 0) {
++		nf_queue_entry_release_refs(entry);
++		kfree_skb(entry->skb);
++		kfree(entry);
++	}
++
++	rcu_read_unlock();
++}
++
++static int imq_dev_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++	dev->stats.tx_bytes += skb->len;
++	dev->stats.tx_packets++;
++
++	skb->imq_flags = 0;
++	skb->destructor = NULL;
++
++	skb_restore_cb(skb); /* restore skb->cb */
++
++	dev->trans_start = jiffies;
++	imq_nf_reinject(skb->nf_queue_entry, NF_ACCEPT);
++	return 0;
++}
++
++static int imq_nf_queue(struct nf_queue_entry *entry, unsigned queue_num)
++{
++	struct net_device *dev;
++	struct sk_buff *skb_orig, *skb, *skb_shared;
++	struct Qdisc *q;
++	struct netdev_queue *txq;
++	int users, index;
++	int retval = -EINVAL;
++
++	index = entry->skb->imq_flags & IMQ_F_IFMASK;
++	if (unlikely(index > numdevs - 1)) {
++		if (net_ratelimit())
++			printk(KERN_WARNING
++			       "IMQ: invalid device specified, highest is %u\n",
++			       numdevs - 1);
++		retval = -EINVAL;
++		goto out;
++	}
++
++	/* check for imq device by index from cache */
++	dev = imq_devs_cache[index];
++	if (unlikely(!dev)) {
++		char buf[8];
++
++		/* get device by name and cache result */
++		snprintf(buf, sizeof(buf), "imq%d", index);
++		dev = dev_get_by_name(&init_net, buf);
++		if (!dev) {
++			/* not found ?!*/
++			BUG();
++			retval = -ENODEV;
++			goto out;
++		}
++
++		imq_devs_cache[index] = dev;
++		dev_put(dev);
++	}
++
++	if (unlikely(!(dev->flags & IFF_UP))) {
++		entry->skb->imq_flags = 0;
++		imq_nf_reinject(entry, NF_ACCEPT);
++		retval = 0;
++		goto out;
++	}
++	dev->last_rx = jiffies;
++
++	skb = entry->skb;
++	skb_orig = NULL;
++
++	/* skb has owner? => make clone */
++	if (unlikely(skb->destructor)) {
++		skb_orig = skb;
++		skb = skb_clone(skb, GFP_ATOMIC);
++		if (!skb) {
++			retval = -ENOMEM;
++			goto out;
++		}
++		entry->skb = skb;
++	}
++
++	skb->nf_queue_entry = entry;
++
++	dev->stats.rx_bytes += skb->len;
++	dev->stats.rx_packets++;
++
++	txq = dev_pick_tx(dev, skb);
++
++	q = rcu_dereference(txq->qdisc);
++	if (unlikely(!q->enqueue))
++		goto packet_not_eaten_by_imq_dev;
++
++	spin_lock_bh(qdisc_lock(q));
++
++	users = atomic_read(&skb->users);
++
++	skb_shared = skb_get(skb); /* increase reference count by one */
++	skb_save_cb(skb_shared); /* backup skb->cb, as qdisc layer will
++					overwrite it */
++	qdisc_enqueue_root(skb_shared, q); /* might kfree_skb */
++
++	if (likely(atomic_read(&skb_shared->users) == users + 1)) {
++		kfree_skb(skb_shared); /* decrease reference count by one */
++
++		skb->destructor = &imq_skb_destructor;
++
++		/* cloned? */
++		if (skb_orig)
++			kfree_skb(skb_orig); /* free original */
++
++		spin_unlock_bh(qdisc_lock(q));
++
++		/* schedule qdisc dequeue */
++		__netif_schedule(q);
++
++		retval = 0;
++		goto out;
++	} else {
++		skb_restore_cb(skb_shared); /* restore skb->cb */
++		/* qdisc dropped packet and decreased skb reference count of
++		 * skb, so we don't really want to and try refree as that would
++		 * actually destroy the skb. */
++		spin_unlock_bh(qdisc_lock(q));
++		goto packet_not_eaten_by_imq_dev;
++	}
++
++packet_not_eaten_by_imq_dev:
++	/* cloned? restore original */
++	if (skb_orig) {
++		kfree_skb(skb);
++		entry->skb = skb_orig;
++	}
++	retval = -1;
++out:
++	return retval;
++}
++
++static struct nf_queue_handler nfqh = {
++	.name  = "imq",
++	.outfn = imq_nf_queue,
++};
++
++static unsigned int imq_nf_hook(unsigned int hook, struct sk_buff *pskb,
++				const struct net_device *indev,
++				const struct net_device *outdev,
++				int (*okfn)(struct sk_buff *))
++{
++	if (pskb->imq_flags & IMQ_F_ENQUEUE)
++		return NF_QUEUE;
++
++	return NF_ACCEPT;
++}
++
++static int imq_close(struct net_device *dev)
++{
++	netif_stop_queue(dev);
++	return 0;
++}
++
++static int imq_open(struct net_device *dev)
++{
++	netif_start_queue(dev);
++	return 0;
++}
++
++static const struct net_device_ops imq_netdev_ops = {
++	.ndo_open		= imq_open,
++	.ndo_stop		= imq_close,
++	.ndo_start_xmit		= imq_dev_xmit,
++	.ndo_get_stats		= imq_get_stats,
++};
++
++static void imq_setup(struct net_device *dev)
++{
++	dev->netdev_ops		= &imq_netdev_ops;
++	dev->type               = ARPHRD_VOID;
++	dev->mtu                = 16000;
++	dev->tx_queue_len       = 11000;
++	dev->flags              = IFF_NOARP;
++	dev->features           = NETIF_F_SG | NETIF_F_FRAGLIST |
++				  NETIF_F_GSO | NETIF_F_HW_CSUM |
++				  NETIF_F_HIGHDMA;
++}
++
++static int imq_validate(struct nlattr *tb[], struct nlattr *data[])
++{
++	int ret = 0;
++
++	if (tb[IFLA_ADDRESS]) {
++		if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN) {
++			ret = -EINVAL;
++			goto end;
++		}
++		if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS]))) {
++			ret = -EADDRNOTAVAIL;
++			goto end;
++		}
++	}
++	return 0;
++end:
++	printk(KERN_WARNING "IMQ: imq_validate failed (%d)\n", ret);
++	return ret;
++}
++
++static struct rtnl_link_ops imq_link_ops __read_mostly = {
++	.kind		= "imq",
++	.priv_size	= 0,
++	.setup		= imq_setup,
++	.validate	= imq_validate,
++};
++
++static int __init imq_init_hooks(void)
++{
++	int err;
++
++	nf_register_queue_imq_handler(&nfqh);
++
++	err = nf_register_hook(&imq_ingress_ipv4);
++	if (err)
++		goto err1;
++
++	err = nf_register_hook(&imq_egress_ipv4);
++	if (err)
++		goto err2;
++
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++	err = nf_register_hook(&imq_ingress_ipv6);
++	if (err)
++		goto err3;
++
++	err = nf_register_hook(&imq_egress_ipv6);
++	if (err)
++		goto err4;
++#endif
++
++	return 0;
++
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++err4:
++	nf_unregister_hook(&imq_ingress_ipv6);
++err3:
++	nf_unregister_hook(&imq_egress_ipv4);
++#endif
++err2:
++	nf_unregister_hook(&imq_ingress_ipv4);
++err1:
++	nf_unregister_queue_imq_handler();
++	return err;
++}
++
++static int __init imq_init_one(int index)
++{
++	struct net_device *dev;
++	int ret;
++
++	dev = alloc_netdev(0, "imq%d", imq_setup);
++	if (!dev)
++		return -ENOMEM;
++
++	ret = dev_alloc_name(dev, dev->name);
++	if (ret < 0)
++		goto fail;
++
++	dev->rtnl_link_ops = &imq_link_ops;
++	ret = register_netdevice(dev);
++	if (ret < 0)
++		goto fail;
++
++	return 0;
++fail:
++	free_netdev(dev);
++	return ret;
++}
++
++static int __init imq_init_devs(void)
++{
++	int err, i;
++
++	if (numdevs < 1 || numdevs > IMQ_MAX_DEVS) {
++		printk(KERN_ERR "IMQ: numdevs has to be betweed 1 and %u\n",
++		       IMQ_MAX_DEVS);
++		return -EINVAL;
++	}
++
++	rtnl_lock();
++	err = __rtnl_link_register(&imq_link_ops);
++
++	for (i = 0; i < numdevs && !err; i++)
++		err = imq_init_one(i);
++
++	if (err) {
++		__rtnl_link_unregister(&imq_link_ops);
++		memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
++	}
++	rtnl_unlock();
++
++	return err;
++}
++
++static int __init imq_init_module(void)
++{
++	int err;
++
++#if defined(CONFIG_IMQ_NUM_DEVS)
++	BUILD_BUG_ON(CONFIG_IMQ_NUM_DEVS > 16);
++	BUILD_BUG_ON(CONFIG_IMQ_NUM_DEVS < 2);
++	BUILD_BUG_ON(CONFIG_IMQ_NUM_DEVS - 1 > IMQ_F_IFMASK);
++#endif
++
++	err = imq_init_devs();
++	if (err) {
++		printk(KERN_ERR "IMQ: Error trying imq_init_devs(net)\n");
++		return err;
++	}
++
++	err = imq_init_hooks();
++	if (err) {
++		printk(KERN_ERR "IMQ: Error trying imq_init_hooks()\n");
++		rtnl_link_unregister(&imq_link_ops);
++		memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
++		return err;
++	}
++
++	printk(KERN_INFO "IMQ driver loaded successfully.\n");
++
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++	printk(KERN_INFO "\tHooking IMQ before NAT on PREROUTING.\n");
++#else
++	printk(KERN_INFO "\tHooking IMQ after NAT on PREROUTING.\n");
++#endif
++#if defined(CONFIG_IMQ_BEHAVIOR_AB) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++	printk(KERN_INFO "\tHooking IMQ before NAT on POSTROUTING.\n");
++#else
++	printk(KERN_INFO "\tHooking IMQ after NAT on POSTROUTING.\n");
++#endif
++
++	return 0;
++}
++
++static void __exit imq_unhook(void)
++{
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++	nf_unregister_hook(&imq_ingress_ipv6);
++	nf_unregister_hook(&imq_egress_ipv6);
++#endif
++	nf_unregister_hook(&imq_ingress_ipv4);
++	nf_unregister_hook(&imq_egress_ipv4);
++
++	nf_unregister_queue_imq_handler();
++}
++
++static void __exit imq_cleanup_devs(void)
++{
++	rtnl_link_unregister(&imq_link_ops);
++	memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
++}
++
++static void __exit imq_exit_module(void)
++{
++	imq_unhook();
++	imq_cleanup_devs();
++	printk(KERN_INFO "IMQ driver unloaded successfully.\n");
++}
++
++module_init(imq_init_module);
++module_exit(imq_exit_module);
++
++module_param(numdevs, int, 0);
++MODULE_PARM_DESC(numdevs, "number of IMQ devices (how many imq* devices will "
++			"be created)");
++MODULE_AUTHOR("http://www.linuximq.net");
++MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See "
++			"http://www.linuximq.net/ for more information.");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS_RTNL_LINK("imq");
++
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -109,6 +109,129 @@ config EQUALIZER
+ 	  To compile this driver as a module, choose M here: the module
+ 	  will be called eql.  If unsure, say N.
+ 
++config IMQ
++	tristate "IMQ (intermediate queueing device) support"
++	depends on NETDEVICES && NETFILTER
++	---help---
++	  The IMQ device(s) is used as placeholder for QoS queueing
++	  disciplines. Every packet entering/leaving the IP stack can be
++	  directed through the IMQ device where it's enqueued/dequeued to the
++	  attached qdisc. This allows you to treat network devices as classes
++	  and distribute bandwidth among them. Iptables is used to specify
++	  through which IMQ device, if any, packets travel.
++
++	  More information at: http://www.linuximq.net/
++
++	  To compile this driver as a module, choose M here: the module
++	  will be called imq.  If unsure, say N.
++
++choice
++	prompt "IMQ behavior (PRE/POSTROUTING)"
++	depends on IMQ
++	default IMQ_BEHAVIOR_AB
++	help
++
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		IMQ can work in any of the following ways:
++
++		    PREROUTING   |      POSTROUTING
++		-----------------|-------------------
++		#1  After NAT    |      After NAT
++		#2  After NAT    |      Before NAT
++		#3  Before NAT   |      After NAT
++		#4  Before NAT   |      Before NAT
++
++		The default behavior is to hook before NAT on PREROUTING
++		and after NAT on POSTROUTING (#3).
++
++		This settings are specially usefull when trying to use IMQ
++		to shape NATed clients.
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_AA
++	bool "IMQ AA"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   After NAT
++		POSTROUTING:  After NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_AB
++	bool "IMQ AB"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   After NAT
++		POSTROUTING:  Before NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_BA
++	bool "IMQ BA"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   Before NAT
++		POSTROUTING:  After NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_BB
++	bool "IMQ BB"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   Before NAT
++		POSTROUTING:  Before NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++endchoice
++
++config IMQ_NUM_DEVS
++
++	int "Number of IMQ devices"
++	range 2 16
++	depends on IMQ
++	default "16"
++	help
++
++		This settings defines how many IMQ devices will be
++		created.
++
++		The default value is 16.
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
+ config TUN
+ 	tristate "Universal TUN/TAP device driver support"
+ 	select CRC32
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -160,6 +160,7 @@ obj-$(CONFIG_SLHC) += slhc.o
+ obj-$(CONFIG_XEN_NETDEV_FRONTEND) += xen-netfront.o
+ 
+ obj-$(CONFIG_DUMMY) += dummy.o
++obj-$(CONFIG_IMQ) += imq.o
+ obj-$(CONFIG_IFB) += ifb.o
+ obj-$(CONFIG_MACVLAN) += macvlan.o
+ obj-$(CONFIG_DE600) += de600.o
+--- /dev/null
++++ b/include/linux/imq.h
+@@ -0,0 +1,13 @@
++#ifndef _IMQ_H
++#define _IMQ_H
++
++/* IFMASK (16 device indexes, 0 to 15) and flag(s) fit in 5 bits */
++#define IMQ_F_BITS	5
++
++#define IMQ_F_IFMASK	0x0f
++#define IMQ_F_ENQUEUE	0x10
++
++#define IMQ_MAX_DEVS	(IMQ_F_IFMASK + 1)
++
++#endif /* _IMQ_H */
++
+--- /dev/null
++++ b/include/linux/netfilter_ipv4/ipt_IMQ.h
+@@ -0,0 +1,10 @@
++#ifndef _IPT_IMQ_H
++#define _IPT_IMQ_H
++
++/* Backwards compatibility for old userspace */
++#include <linux/netfilter/xt_IMQ.h>
++
++#define ipt_imq_info xt_imq_info
++
++#endif /* _IPT_IMQ_H */
++
+--- /dev/null
++++ b/include/linux/netfilter_ipv6/ip6t_IMQ.h
+@@ -0,0 +1,10 @@
++#ifndef _IP6T_IMQ_H
++#define _IP6T_IMQ_H
++
++/* Backwards compatibility for old userspace */
++#include <linux/netfilter/xt_IMQ.h>
++
++#define ip6t_imq_info xt_imq_info
++
++#endif /* _IP6T_IMQ_H */
++
+--- a/include/linux/skbuff.h
++++ b/include/linux/skbuff.h
+@@ -29,6 +29,9 @@
+ #include <linux/rcupdate.h>
+ #include <linux/dmaengine.h>
+ #include <linux/hrtimer.h>
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++#include <linux/imq.h>
++#endif
+ 
+ /* Don't change this without changing skb_csum_unnecessary! */
+ #define CHECKSUM_NONE 0
+@@ -331,6 +334,9 @@ struct sk_buff {
+ 	 * first. This is owned by whoever has the skb queued ATM.
+ 	 */
+ 	char			cb[48];
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	void			*cb_next;
++#endif
+ 
+ 	unsigned int		len,
+ 				data_len;
+@@ -363,6 +369,9 @@ struct sk_buff {
+ 	struct nf_conntrack	*nfct;
+ 	struct sk_buff		*nfct_reasm;
+ #endif
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	struct nf_queue_entry	*nf_queue_entry;
++#endif
+ #ifdef CONFIG_BRIDGE_NETFILTER
+ 	struct nf_bridge_info	*nf_bridge;
+ #endif
+@@ -386,6 +395,9 @@ struct sk_buff {
+ 	kmemcheck_bitfield_end(flags2);
+ 
+ 	/* 0/13/14 bit hole */
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	__u8			imq_flags:IMQ_F_BITS;
++#endif
+ 
+ #ifdef CONFIG_NET_DMA
+ 	dma_cookie_t		dma_cookie;
+@@ -441,6 +453,12 @@ static inline struct rtable *skb_rtable(
+ 	return (struct rtable *)skb_dst(skb);
+ }
+ 
++
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++extern int skb_save_cb(struct sk_buff *skb);
++extern int skb_restore_cb(struct sk_buff *skb);
++#endif
++
+ extern void kfree_skb(struct sk_buff *skb);
+ extern void consume_skb(struct sk_buff *skb);
+ extern void	       __kfree_skb(struct sk_buff *skb);
+@@ -1976,6 +1994,10 @@ static inline void __nf_copy(struct sk_b
+ 	dst->nfct_reasm = src->nfct_reasm;
+ 	nf_conntrack_get_reasm(src->nfct_reasm);
+ #endif
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	dst->imq_flags = src->imq_flags;
++	dst->nf_queue_entry = src->nf_queue_entry;
++#endif
+ #ifdef CONFIG_BRIDGE_NETFILTER
+ 	dst->nf_bridge  = src->nf_bridge;
+ 	nf_bridge_get(src->nf_bridge);
+--- a/net/core/dev.c
++++ b/net/core/dev.c
+@@ -96,6 +96,9 @@
+ #include <net/net_namespace.h>
+ #include <net/sock.h>
+ #include <linux/rtnetlink.h>
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++#include <linux/imq.h>
++#endif
+ #include <linux/proc_fs.h>
+ #include <linux/seq_file.h>
+ #include <linux/stat.h>
+@@ -1687,7 +1690,11 @@ int dev_hard_start_xmit(struct sk_buff *
+ 	int rc;
+ 
+ 	if (likely(!skb->next)) {
+-		if (!list_empty(&ptype_all))
++		if (!list_empty(&ptype_all)
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++		    && !(skb->imq_flags & IMQ_F_ENQUEUE)
++#endif
++		    )
+ 			dev_queue_xmit_nit(skb, dev);
+ 
+ 		if (netif_needs_gso(dev, skb)) {
+@@ -1772,8 +1779,7 @@ u16 skb_tx_hash(const struct net_device
+ }
+ EXPORT_SYMBOL(skb_tx_hash);
+ 
+-static struct netdev_queue *dev_pick_tx(struct net_device *dev,
+-					struct sk_buff *skb)
++struct netdev_queue *dev_pick_tx(struct net_device *dev, struct sk_buff *skb)
+ {
+ 	const struct net_device_ops *ops = dev->netdev_ops;
+ 	u16 queue_index = 0;
+@@ -1786,6 +1792,7 @@ static struct netdev_queue *dev_pick_tx(
+ 	skb_set_queue_mapping(skb, queue_index);
+ 	return netdev_get_tx_queue(dev, queue_index);
+ }
++EXPORT_SYMBOL(dev_pick_tx);
+ 
+ /**
+  *	dev_queue_xmit - transmit a buffer
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -1102,6 +1102,7 @@ extern int		dev_alloc_name(struct net_de
+ extern int		dev_open(struct net_device *dev);
+ extern int		dev_close(struct net_device *dev);
+ extern void		dev_disable_lro(struct net_device *dev);
++extern struct netdev_queue *dev_pick_tx(struct net_device *dev, struct sk_buff *skb);
+ extern int		dev_queue_xmit(struct sk_buff *skb);
+ extern int		register_netdevice(struct net_device *dev);
+ extern void		unregister_netdevice(struct net_device *dev);
+--- /dev/null
++++ b/include/linux/netfilter/xt_IMQ.h
+@@ -0,0 +1,9 @@
++#ifndef _XT_IMQ_H
++#define _XT_IMQ_H
++
++struct xt_imq_info {
++	unsigned int todev;     /* target imq device */
++};
++
++#endif /* _XT_IMQ_H */
++
+--- a/include/net/netfilter/nf_queue.h
++++ b/include/net/netfilter/nf_queue.h
+@@ -13,6 +13,12 @@ struct nf_queue_entry {
+ 	struct net_device	*indev;
+ 	struct net_device	*outdev;
+ 	int			(*okfn)(struct sk_buff *);
++
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	int			(*next_outfn)(struct nf_queue_entry *entry,
++					      unsigned int queuenum);
++	unsigned int		next_queuenum;
++#endif
+ };
+ 
+ #define nf_queue_entry_reroute(x) ((void *)x + sizeof(struct nf_queue_entry))
+@@ -30,5 +36,11 @@ extern int nf_unregister_queue_handler(u
+ 				       const struct nf_queue_handler *qh);
+ extern void nf_unregister_queue_handlers(const struct nf_queue_handler *qh);
+ extern void nf_reinject(struct nf_queue_entry *entry, unsigned int verdict);
++extern void nf_queue_entry_release_refs(struct nf_queue_entry *entry);
++
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++extern void nf_register_queue_imq_handler(const struct nf_queue_handler *qh);
++extern void nf_unregister_queue_imq_handler(void);
++#endif
+ 
+ #endif /* _NF_QUEUE_H */
+--- a/net/core/skbuff.c
++++ b/net/core/skbuff.c
+@@ -72,6 +72,9 @@
+ 
+ static struct kmem_cache *skbuff_head_cache __read_mostly;
+ static struct kmem_cache *skbuff_fclone_cache __read_mostly;
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++static struct kmem_cache *skbuff_cb_store_cache __read_mostly;
++#endif
+ 
+ static void sock_pipe_buf_release(struct pipe_inode_info *pipe,
+ 				  struct pipe_buffer *buf)
+@@ -91,6 +94,80 @@ static int sock_pipe_buf_steal(struct pi
+ 	return 1;
+ }
+ 
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++/* Control buffer save/restore for IMQ devices */
++struct skb_cb_table {
++	void			*cb_next;
++	atomic_t		refcnt;
++	char      		cb[48];
++};
++
++static DEFINE_SPINLOCK(skb_cb_store_lock);
++
++int skb_save_cb(struct sk_buff *skb)
++{
++	struct skb_cb_table *next;
++
++	next = kmem_cache_alloc(skbuff_cb_store_cache, GFP_ATOMIC);
++	if (!next)
++		return -ENOMEM;
++
++	BUILD_BUG_ON(sizeof(skb->cb) != sizeof(next->cb));
++
++	memcpy(next->cb, skb->cb, sizeof(skb->cb));
++	next->cb_next = skb->cb_next;
++
++	atomic_set(&next->refcnt, 1);
++
++	skb->cb_next = next;
++	return 0;
++}
++EXPORT_SYMBOL(skb_save_cb);
++
++int skb_restore_cb(struct sk_buff *skb)
++{
++	struct skb_cb_table *next;
++
++	if (!skb->cb_next)
++		return 0;
++
++	next = skb->cb_next;
++
++	BUILD_BUG_ON(sizeof(skb->cb) != sizeof(next->cb));
++
++	memcpy(skb->cb, next->cb, sizeof(skb->cb));
++	skb->cb_next = next->cb_next;
++
++	spin_lock(&skb_cb_store_lock);
++
++	if (atomic_dec_and_test(&next->refcnt)) {
++		kmem_cache_free(skbuff_cb_store_cache, next);
++	}
++
++	spin_unlock(&skb_cb_store_lock);
++
++	return 0;
++}
++EXPORT_SYMBOL(skb_restore_cb);
++
++static void skb_copy_stored_cb(struct sk_buff *new, struct sk_buff *old)
++{
++	struct skb_cb_table *next;
++
++	if (!old->cb_next) {
++		new->cb_next = 0;
++		return;
++	}
++
++	spin_lock(&skb_cb_store_lock);
++
++	next = old->cb_next;
++	atomic_inc(&next->refcnt);
++	new->cb_next = next;
++
++	spin_unlock(&skb_cb_store_lock);
++}
++#endif
+ 
+ /* Pipe buffer operations for a socket. */
+ static struct pipe_buf_operations sock_pipe_buf_ops = {
+@@ -398,6 +475,15 @@ static void skb_release_head_state(struc
+ 		WARN_ON(in_irq());
+ 		skb->destructor(skb);
+ 	}
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	/* This should not happen. When it does, avoid memleak by restoring
++	the chain of cb-backups. */
++	while(skb->cb_next != NULL) {
++		printk(KERN_WARNING "kfree_skb: skb->cb_next: %08x\n",
++			skb->cb_next);
++		skb_restore_cb(skb);
++	}
++#endif
+ #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
+ 	nf_conntrack_put(skb->nfct);
+ 	nf_conntrack_put_reasm(skb->nfct_reasm);
+@@ -535,6 +621,9 @@ static void __copy_skb_header(struct sk_
+ 	new->sp			= secpath_get(old->sp);
+ #endif
+ 	memcpy(new->cb, old->cb, sizeof(old->cb));
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++   skb_copy_stored_cb(new, old);
++#endif
+ 	new->csum		= old->csum;
+ 	new->local_df		= old->local_df;
+ 	new->pkt_type		= old->pkt_type;
+@@ -2779,6 +2868,13 @@ void __init skb_init(void)
+ 						0,
+ 						SLAB_HWCACHE_ALIGN|SLAB_PANIC,
+ 						NULL);
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	skbuff_cb_store_cache = kmem_cache_create("skbuff_cb_store_cache",
++						  sizeof(struct skb_cb_table),
++						  0,
++						  SLAB_HWCACHE_ALIGN|SLAB_PANIC,
++						  NULL);
++#endif
+ }
+ 
+ /**
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -396,6 +396,18 @@ config NETFILTER_XT_TARGET_LED
+ 	  For more information on the LEDs available on your system, see
+ 	  Documentation/leds-class.txt
+ 
++config NETFILTER_XT_TARGET_IMQ
++        tristate '"IMQ" target support'
++	depends on NETFILTER_XTABLES
++	depends on IP_NF_MANGLE || IP6_NF_MANGLE
++	select IMQ
++	default m if NETFILTER_ADVANCED=n
++        help
++          This option adds a `IMQ' target which is used to specify if and
++          to which imq device packets should get enqueued/dequeued.
++
++          To compile it as a module, choose M here.  If unsure, say N.
++
+ config NETFILTER_XT_TARGET_MARK
+ 	tristate '"MARK" target support'
+ 	default m if NETFILTER_ADVANCED=n
+--- a/net/netfilter/Makefile
++++ b/net/netfilter/Makefile
+@@ -46,6 +46,7 @@ obj-$(CONFIG_NETFILTER_XT_TARGET_CONNMAR
+ obj-$(CONFIG_NETFILTER_XT_TARGET_CONNSECMARK) += xt_CONNSECMARK.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_DSCP) += xt_DSCP.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_HL) += xt_HL.o
++obj-$(CONFIG_NETFILTER_XT_TARGET_IMQ) += xt_IMQ.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_LED) += xt_LED.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_MARK) += xt_MARK.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_NFLOG) += xt_NFLOG.o
+--- a/net/netfilter/nf_queue.c
++++ b/net/netfilter/nf_queue.c
+@@ -20,6 +20,26 @@ static const struct nf_queue_handler *qu
+ 
+ static DEFINE_MUTEX(queue_handler_mutex);
+ 
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++static const struct nf_queue_handler *queue_imq_handler;
++
++void nf_register_queue_imq_handler(const struct nf_queue_handler *qh)
++{
++	mutex_lock(&queue_handler_mutex);
++	rcu_assign_pointer(queue_imq_handler, qh);
++	mutex_unlock(&queue_handler_mutex);
++}
++EXPORT_SYMBOL(nf_register_queue_imq_handler);
++
++void nf_unregister_queue_imq_handler(void)
++{
++	mutex_lock(&queue_handler_mutex);
++	rcu_assign_pointer(queue_imq_handler, NULL);
++	mutex_unlock(&queue_handler_mutex);
++}
++EXPORT_SYMBOL(nf_unregister_queue_imq_handler);
++#endif
++
+ /* return EBUSY when somebody else is registered, return EEXIST if the
+  * same handler is registered, return 0 in case of success. */
+ int nf_register_queue_handler(u_int8_t pf, const struct nf_queue_handler *qh)
+@@ -80,7 +100,7 @@ void nf_unregister_queue_handlers(const
+ }
+ EXPORT_SYMBOL_GPL(nf_unregister_queue_handlers);
+ 
+-static void nf_queue_entry_release_refs(struct nf_queue_entry *entry)
++void nf_queue_entry_release_refs(struct nf_queue_entry *entry)
+ {
+ 	/* Release those devices we held, or Alexey will kill me. */
+ 	if (entry->indev)
+@@ -100,6 +120,7 @@ static void nf_queue_entry_release_refs(
+ 	/* Drop reference to owner of hook which queued us. */
+ 	module_put(entry->elem->owner);
+ }
++EXPORT_SYMBOL_GPL(nf_queue_entry_release_refs);
+ 
+ /*
+  * Any packet that leaves via this function must come back
+@@ -121,12 +142,26 @@ static int __nf_queue(struct sk_buff *sk
+ #endif
+ 	const struct nf_afinfo *afinfo;
+ 	const struct nf_queue_handler *qh;
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	const struct nf_queue_handler *qih = NULL;
++#endif
+ 
+ 	/* QUEUE == DROP if noone is waiting, to be safe. */
+ 	rcu_read_lock();
+ 
+ 	qh = rcu_dereference(queue_handler[pf]);
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++	if (pf == PF_INET || pf == PF_INET6)
++#else
++	if (pf == PF_INET)
++#endif
++		qih = rcu_dereference(queue_imq_handler);
++
++	if (!qh && !qih)
++#else /* !IMQ */
+ 	if (!qh)
++#endif
+ 		goto err_unlock;
+ 
+ 	afinfo = nf_get_afinfo(pf);
+@@ -145,6 +180,10 @@ static int __nf_queue(struct sk_buff *sk
+ 		.indev	= indev,
+ 		.outdev	= outdev,
+ 		.okfn	= okfn,
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++		.next_outfn = qh ? qh->outfn : NULL,
++		.next_queuenum = queuenum,
++#endif
+ 	};
+ 
+ 	/* If it's going away, ignore hook. */
+@@ -170,8 +209,19 @@ static int __nf_queue(struct sk_buff *sk
+ 	}
+ #endif
+ 	afinfo->saveroute(skb, entry);
++
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	if (qih) {
++		status = qih->outfn(entry, queuenum);
++		goto imq_skip_queue;
++	}
++#endif
++
+ 	status = qh->outfn(entry, queuenum);
+ 
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++imq_skip_queue:
++#endif
+ 	rcu_read_unlock();
+ 
+ 	if (status < 0) {
+--- /dev/null
++++ b/net/netfilter/xt_IMQ.c
+@@ -0,0 +1,73 @@
++/*
++ * This target marks packets to be enqueued to an imq device
++ */
++#include <linux/module.h>
++#include <linux/skbuff.h>
++#include <linux/netfilter/x_tables.h>
++#include <linux/netfilter/xt_IMQ.h>
++#include <linux/imq.h>
++
++static unsigned int imq_target(struct sk_buff *pskb,
++				const struct xt_target_param *par)
++{
++	const struct xt_imq_info *mr = par->targinfo;
++
++	pskb->imq_flags = (mr->todev & IMQ_F_IFMASK) | IMQ_F_ENQUEUE;
++
++	return XT_CONTINUE;
++}
++
++static bool imq_checkentry(const struct xt_tgchk_param *par)
++{
++	struct xt_imq_info *mr = par->targinfo;
++
++	if (mr->todev > IMQ_MAX_DEVS - 1) {
++		printk(KERN_WARNING
++		       "IMQ: invalid device specified, highest is %u\n",
++		       IMQ_MAX_DEVS - 1);
++		return 0;
++	}
++
++	return 1;
++}
++
++static struct xt_target xt_imq_reg[] __read_mostly = {
++	{
++		.name           = "IMQ",
++		.family		= AF_INET,
++		.checkentry     = imq_checkentry,
++		.target         = imq_target,
++		.targetsize	= sizeof(struct xt_imq_info),
++		.table		= "mangle",
++		.me             = THIS_MODULE
++	},
++	{
++		.name           = "IMQ",
++		.family		= AF_INET6,
++		.checkentry     = imq_checkentry,
++		.target         = imq_target,
++		.targetsize	= sizeof(struct xt_imq_info),
++		.table		= "mangle",
++		.me             = THIS_MODULE
++	},
++};
++
++static int __init imq_init(void)
++{
++	return xt_register_targets(xt_imq_reg, ARRAY_SIZE(xt_imq_reg));
++}
++
++static void __exit imq_fini(void)
++{
++	xt_unregister_targets(xt_imq_reg, ARRAY_SIZE(xt_imq_reg));
++}
++
++module_init(imq_init);
++module_exit(imq_fini);
++
++MODULE_AUTHOR("http://www.linuximq.net");
++MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See http://www.linuximq.net/ for more information.");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("ipt_IMQ");
++MODULE_ALIAS("ip6t_IMQ");
++
diff --git a/target/linux/generic/patches-2.6.31/180-netfilter_depends.patch b/target/linux/generic/patches-2.6.31/180-netfilter_depends.patch
new file mode 100644
index 0000000000..fc00d159c3
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/180-netfilter_depends.patch
@@ -0,0 +1,18 @@
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -160,7 +160,6 @@ config NF_CONNTRACK_FTP
+ 
+ config NF_CONNTRACK_H323
+ 	tristate "H.323 protocol support"
+-	depends on (IPV6 || IPV6=n)
+ 	depends on NETFILTER_ADVANCED
+ 	help
+ 	  H.323 is a VoIP signalling protocol from ITU-T. As one of the most
+@@ -505,7 +504,6 @@ config NETFILTER_XT_TARGET_SECMARK
+ 
+ config NETFILTER_XT_TARGET_TCPMSS
+ 	tristate '"TCPMSS" target support'
+-	depends on (IPV6 || IPV6=n)
+ 	default m if NETFILTER_ADVANCED=n
+ 	---help---
+ 	  This option adds a `TCPMSS' target, which allows you to alter the
diff --git a/target/linux/generic/patches-2.6.31/190-netfilter_rtsp.patch b/target/linux/generic/patches-2.6.31/190-netfilter_rtsp.patch
new file mode 100644
index 0000000000..29e82084ca
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/190-netfilter_rtsp.patch
@@ -0,0 +1,1366 @@
+--- /dev/null
++++ b/include/linux/netfilter/nf_conntrack_rtsp.h
+@@ -0,0 +1,63 @@
++/*
++ * RTSP extension for IP connection tracking.
++ * (C) 2003 by Tom Marshall <tmarshall at real.com>
++ * based on ip_conntrack_irc.h
++ *
++ *      This program is free software; you can redistribute it and/or
++ *      modify it under the terms of the GNU General Public License
++ *      as published by the Free Software Foundation; either version
++ *      2 of the License, or (at your option) any later version.
++ */
++#ifndef _IP_CONNTRACK_RTSP_H
++#define _IP_CONNTRACK_RTSP_H
++
++//#define IP_NF_RTSP_DEBUG 1
++#define IP_NF_RTSP_VERSION "0.6.21"
++
++#ifdef __KERNEL__
++/* port block types */
++typedef enum {
++    pb_single,  /* client_port=x */
++    pb_range,   /* client_port=x-y */
++    pb_discon   /* client_port=x/y (rtspbis) */
++} portblock_t;
++
++/* We record seq number and length of rtsp headers here, all in host order. */
++
++/*
++ * This structure is per expected connection.  It is a member of struct
++ * ip_conntrack_expect.  The TCP SEQ for the conntrack expect is stored
++ * there and we are expected to only store the length of the data which
++ * needs replaced.  If a packet contains multiple RTSP messages, we create
++ * one expected connection per message.
++ *
++ * We use these variables to mark the entire header block.  This may seem
++ * like overkill, but the nature of RTSP requires it.  A header may appear
++ * multiple times in a message.  We must treat two Transport headers the
++ * same as one Transport header with two entries.
++ */
++struct ip_ct_rtsp_expect
++{
++    u_int32_t   len;        /* length of header block */
++    portblock_t pbtype;     /* Type of port block that was requested */
++    u_int16_t   loport;     /* Port that was requested, low or first */
++    u_int16_t   hiport;     /* Port that was requested, high or second */
++#if 0
++    uint        method;     /* RTSP method */
++    uint        cseq;       /* CSeq from request */
++#endif
++};
++
++extern unsigned int (*nf_nat_rtsp_hook)(struct sk_buff *skb,
++				 enum ip_conntrack_info ctinfo,
++				 unsigned int matchoff, unsigned int matchlen,
++				 struct ip_ct_rtsp_expect *prtspexp,
++				 struct nf_conntrack_expect *exp);
++
++extern void (*nf_nat_rtsp_hook_expectfn)(struct nf_conn *ct, struct nf_conntrack_expect *exp);
++
++#define RTSP_PORT   554
++
++#endif /* __KERNEL__ */
++
++#endif /* _IP_CONNTRACK_RTSP_H */
+--- /dev/null
++++ b/include/linux/netfilter_helpers.h
+@@ -0,0 +1,133 @@
++/*
++ * Helpers for netfiler modules.  This file provides implementations for basic
++ * functions such as strncasecmp(), etc.
++ *
++ * gcc will warn for defined but unused functions, so we only include the
++ * functions requested.  The following macros are used:
++ *   NF_NEED_STRNCASECMP        nf_strncasecmp()
++ *   NF_NEED_STRTOU16           nf_strtou16()
++ *   NF_NEED_STRTOU32           nf_strtou32()
++ */
++#ifndef _NETFILTER_HELPERS_H
++#define _NETFILTER_HELPERS_H
++
++/* Only include these functions for kernel code. */
++#ifdef __KERNEL__
++
++#include <linux/ctype.h>
++#define iseol(c) ( (c) == '\r' || (c) == '\n' )
++
++/*
++ * The standard strncasecmp()
++ */
++#ifdef NF_NEED_STRNCASECMP
++static int
++nf_strncasecmp(const char* s1, const char* s2, u_int32_t len)
++{
++    if (s1 == NULL || s2 == NULL)
++    {
++        if (s1 == NULL && s2 == NULL)
++        {
++            return 0;
++        }
++        return (s1 == NULL) ? -1 : 1;
++    }
++    while (len > 0 && tolower(*s1) == tolower(*s2))
++    {
++        len--;
++        s1++;
++        s2++;
++    }
++    return ( (len == 0) ? 0 : (tolower(*s1) - tolower(*s2)) );
++}
++#endif /* NF_NEED_STRNCASECMP */
++
++/*
++ * Parse a string containing a 16-bit unsigned integer.
++ * Returns the number of chars used, or zero if no number is found.
++ */
++#ifdef NF_NEED_STRTOU16
++static int
++nf_strtou16(const char* pbuf, u_int16_t* pval)
++{
++    int n = 0;
++
++    *pval = 0;
++    while (isdigit(pbuf[n]))
++    {
++        *pval = (*pval * 10) + (pbuf[n] - '0');
++        n++;
++    }
++
++    return n;
++}
++#endif /* NF_NEED_STRTOU16 */
++
++/*
++ * Parse a string containing a 32-bit unsigned integer.
++ * Returns the number of chars used, or zero if no number is found.
++ */
++#ifdef NF_NEED_STRTOU32
++static int
++nf_strtou32(const char* pbuf, u_int32_t* pval)
++{
++    int n = 0;
++
++    *pval = 0;
++    while (pbuf[n] >= '0' && pbuf[n] <= '9')
++    {
++        *pval = (*pval * 10) + (pbuf[n] - '0');
++        n++;
++    }
++
++    return n;
++}
++#endif /* NF_NEED_STRTOU32 */
++
++/*
++ * Given a buffer and length, advance to the next line and mark the current
++ * line.
++ */
++#ifdef NF_NEED_NEXTLINE
++static int
++nf_nextline(char* p, uint len, uint* poff, uint* plineoff, uint* plinelen)
++{
++    uint    off = *poff;
++    uint    physlen = 0;
++
++    if (off >= len)
++    {
++        return 0;
++    }
++
++    while (p[off] != '\n')
++    {
++        if (len-off <= 1)
++        {
++            return 0;
++        }
++
++        physlen++;
++        off++;
++    }
++
++    /* if we saw a crlf, physlen needs adjusted */
++    if (physlen > 0 && p[off] == '\n' && p[off-1] == '\r')
++    {
++        physlen--;
++    }
++
++    /* advance past the newline */
++    off++;
++
++    *plineoff = *poff;
++    *plinelen = physlen;
++    *poff = off;
++
++    return 1;
++}
++#endif /* NF_NEED_NEXTLINE */
++
++#endif /* __KERNEL__ */
++
++#endif /* _NETFILTER_HELPERS_H */
+--- /dev/null
++++ b/include/linux/netfilter_mime.h
+@@ -0,0 +1,89 @@
++/*
++ * MIME functions for netfilter modules.  This file provides implementations
++ * for basic MIME parsing.  MIME headers are used in many protocols, such as
++ * HTTP, RTSP, SIP, etc.
++ *
++ * gcc will warn for defined but unused functions, so we only include the
++ * functions requested.  The following macros are used:
++ *   NF_NEED_MIME_NEXTLINE      nf_mime_nextline()
++ */
++#ifndef _NETFILTER_MIME_H
++#define _NETFILTER_MIME_H
++
++/* Only include these functions for kernel code. */
++#ifdef __KERNEL__
++
++#include <linux/ctype.h>
++
++/*
++ * Given a buffer and length, advance to the next line and mark the current
++ * line.  If the current line is empty, *plinelen will be set to zero.  If
++ * not, it will be set to the actual line length (including CRLF).
++ *
++ * 'line' in this context means logical line (includes LWS continuations).
++ * Returns 1 on success, 0 on failure.
++ */
++#ifdef NF_NEED_MIME_NEXTLINE
++static int
++nf_mime_nextline(char* p, uint len, uint* poff, uint* plineoff, uint* plinelen)
++{
++    uint    off = *poff;
++    uint    physlen = 0;
++    int     is_first_line = 1;
++
++    if (off >= len)
++    {
++        return 0;
++    }
++
++    do
++    {
++        while (p[off] != '\n')
++        {
++            if (len-off <= 1)
++            {
++                return 0;
++            }
++
++            physlen++;
++            off++;
++        }
++
++        /* if we saw a crlf, physlen needs adjusted */
++        if (physlen > 0 && p[off] == '\n' && p[off-1] == '\r')
++        {
++            physlen--;
++        }
++
++        /* advance past the newline */
++        off++;
++
++        /* check for an empty line */
++        if (physlen == 0)
++        {
++            break;
++        }
++
++        /* check for colon on the first physical line */
++        if (is_first_line)
++        {
++            is_first_line = 0;
++            if (memchr(p+(*poff), ':', physlen) == NULL)
++            {
++                return 0;
++            }
++        }
++    }
++    while (p[off] == ' ' || p[off] == '\t');
++
++    *plineoff = *poff;
++    *plinelen = (physlen == 0) ? 0 : (off - *poff);
++    *poff = off;
++
++    return 1;
++}
++#endif /* NF_NEED_MIME_NEXTLINE */
++
++#endif /* __KERNEL__ */
++
++#endif /* _NETFILTER_MIME_H */
+--- a/net/ipv4/netfilter/Makefile
++++ b/net/ipv4/netfilter/Makefile
+@@ -26,6 +26,7 @@ obj-$(CONFIG_NF_NAT_AMANDA) += nf_nat_am
+ obj-$(CONFIG_NF_NAT_FTP) += nf_nat_ftp.o
+ obj-$(CONFIG_NF_NAT_H323) += nf_nat_h323.o
+ obj-$(CONFIG_NF_NAT_IRC) += nf_nat_irc.o
++obj-$(CONFIG_NF_NAT_RTSP) += nf_nat_rtsp.o
+ obj-$(CONFIG_NF_NAT_PPTP) += nf_nat_pptp.o
+ obj-$(CONFIG_NF_NAT_SIP) += nf_nat_sip.o
+ obj-$(CONFIG_NF_NAT_SNMP_BASIC) += nf_nat_snmp_basic.o
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -267,6 +267,16 @@ config NF_CONNTRACK_TFTP
+ 
+ 	  To compile it as a module, choose M here.  If unsure, say N.
+ 
++config NF_CONNTRACK_RTSP
++	tristate "RTSP protocol support"
++	depends on NF_CONNTRACK
++	help
++		Support the RTSP protocol.  This allows UDP transports to be setup
++		properly, including RTP and RDT.
++
++		If you want to compile it as a module, say 'M' here and read
++		Documentation/modules.txt.  If unsure, say 'Y'.
++
+ config NF_CT_NETLINK
+ 	tristate 'Connection tracking netlink interface'
+ 	select NETFILTER_NETLINK
+--- a/net/netfilter/Makefile
++++ b/net/netfilter/Makefile
+@@ -33,6 +33,7 @@ obj-$(CONFIG_NF_CONNTRACK_PPTP) += nf_co
+ obj-$(CONFIG_NF_CONNTRACK_SANE) += nf_conntrack_sane.o
+ obj-$(CONFIG_NF_CONNTRACK_SIP) += nf_conntrack_sip.o
+ obj-$(CONFIG_NF_CONNTRACK_TFTP) += nf_conntrack_tftp.o
++obj-$(CONFIG_NF_CONNTRACK_RTSP) += nf_conntrack_rtsp.o
+ 
+ # transparent proxy support
+ obj-$(CONFIG_NETFILTER_TPROXY) += nf_tproxy_core.o
+--- a/net/ipv4/netfilter/Kconfig
++++ b/net/ipv4/netfilter/Kconfig
+@@ -257,6 +257,11 @@ config NF_NAT_IRC
+ 	depends on NF_CONNTRACK && NF_NAT
+ 	default NF_NAT && NF_CONNTRACK_IRC
+ 
++config NF_NAT_RTSP
++	tristate
++ 	depends on IP_NF_IPTABLES && NF_CONNTRACK && NF_NAT
++ 	default NF_NAT && NF_CONNTRACK_RTSP
++
+ config NF_NAT_TFTP
+ 	tristate
+ 	depends on NF_CONNTRACK && NF_NAT
+--- /dev/null
++++ b/net/netfilter/nf_conntrack_rtsp.c
+@@ -0,0 +1,517 @@
++/*
++ * RTSP extension for IP connection tracking
++ * (C) 2003 by Tom Marshall <tmarshall at real.com>
++ * based on ip_conntrack_irc.c
++ *
++ *      This program is free software; you can redistribute it and/or
++ *      modify it under the terms of the GNU General Public License
++ *      as published by the Free Software Foundation; either version
++ *      2 of the License, or (at your option) any later version.
++ *
++ * Module load syntax:
++ *   insmod nf_conntrack_rtsp.o ports=port1,port2,...port<MAX_PORTS>
++ *                              max_outstanding=n setup_timeout=secs
++ *
++ * If no ports are specified, the default will be port 554.
++ *
++ * With max_outstanding you can define the maximum number of not yet
++ * answered SETUP requests per RTSP session (default 8).
++ * With setup_timeout you can specify how long the system waits for
++ * an expected data channel (default 300 seconds).
++ *
++ * 2005-02-13: Harald Welte <laforge at netfilter.org>
++ * 	- port to 2.6
++ * 	- update to recent post-2.6.11 api changes
++ * 2006-09-14: Steven Van Acker <deepstar at singularity.be>
++ *      - removed calls to NAT code from conntrack helper: NAT no longer needed to use rtsp-conntrack
++ * 2007-04-18: Michael Guntsche <mike at it-loops.com>
++ * 			- Port to new NF API
++ */
++
++#include <linux/module.h>
++#include <linux/netfilter.h>
++#include <linux/ip.h>
++#include <linux/inet.h>
++#include <net/tcp.h>
++
++#include <net/netfilter/nf_conntrack.h>
++#include <net/netfilter/nf_conntrack_expect.h>
++#include <net/netfilter/nf_conntrack_helper.h>
++#include <linux/netfilter/nf_conntrack_rtsp.h>
++
++#define NF_NEED_STRNCASECMP
++#define NF_NEED_STRTOU16
++#define NF_NEED_STRTOU32
++#define NF_NEED_NEXTLINE
++#include <linux/netfilter_helpers.h>
++#define NF_NEED_MIME_NEXTLINE
++#include <linux/netfilter_mime.h>
++
++#include <linux/ctype.h>
++#define MAX_SIMUL_SETUP 8 /* XXX: use max_outstanding */
++#define INFOP(fmt, args...) printk(KERN_INFO "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
++#if 0
++#define DEBUGP(fmt, args...) printk(KERN_DEBUG "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
++#else
++#define DEBUGP(fmt, args...)
++#endif
++
++#define MAX_PORTS 8
++static int ports[MAX_PORTS];
++static int num_ports = 0;
++static int max_outstanding = 8;
++static unsigned int setup_timeout = 300;
++
++MODULE_AUTHOR("Tom Marshall <tmarshall at real.com>");
++MODULE_DESCRIPTION("RTSP connection tracking module");
++MODULE_LICENSE("GPL");
++module_param_array(ports, int, &num_ports, 0400);
++MODULE_PARM_DESC(ports, "port numbers of RTSP servers");
++module_param(max_outstanding, int, 0400);
++MODULE_PARM_DESC(max_outstanding, "max number of outstanding SETUP requests per RTSP session");
++module_param(setup_timeout, int, 0400);
++MODULE_PARM_DESC(setup_timeout, "timeout on for unestablished data channels");
++
++static char *rtsp_buffer;
++static DEFINE_SPINLOCK(rtsp_buffer_lock);
++
++unsigned int (*nf_nat_rtsp_hook)(struct sk_buff *skb,
++				 enum ip_conntrack_info ctinfo,
++				 unsigned int matchoff, unsigned int matchlen,struct ip_ct_rtsp_expect* prtspexp,
++				 struct nf_conntrack_expect *exp);
++void (*nf_nat_rtsp_hook_expectfn)(struct nf_conn *ct, struct nf_conntrack_expect *exp);
++
++EXPORT_SYMBOL_GPL(nf_nat_rtsp_hook);
++
++/*
++ * Max mappings we will allow for one RTSP connection (for RTP, the number
++ * of allocated ports is twice this value).  Note that SMIL burns a lot of
++ * ports so keep this reasonably high.  If this is too low, you will see a
++ * lot of "no free client map entries" messages.
++ */
++#define MAX_PORT_MAPS 16
++
++/*** default port list was here in the masq code: 554, 3030, 4040 ***/
++
++#define SKIP_WSPACE(ptr,len,off) while(off < len && isspace(*(ptr+off))) { off++; }
++
++/*
++ * Parse an RTSP packet.
++ *
++ * Returns zero if parsing failed.
++ *
++ * Parameters:
++ *  IN      ptcp        tcp data pointer
++ *  IN      tcplen      tcp data len
++ *  IN/OUT  ptcpoff     points to current tcp offset
++ *  OUT     phdrsoff    set to offset of rtsp headers
++ *  OUT     phdrslen    set to length of rtsp headers
++ *  OUT     pcseqoff    set to offset of CSeq header
++ *  OUT     pcseqlen    set to length of CSeq header
++ */
++static int
++rtsp_parse_message(char* ptcp, uint tcplen, uint* ptcpoff,
++                   uint* phdrsoff, uint* phdrslen,
++                   uint* pcseqoff, uint* pcseqlen,
++                   uint* transoff, uint* translen)
++{
++	uint    entitylen = 0;
++	uint    lineoff;
++	uint    linelen;
++
++	if (!nf_nextline(ptcp, tcplen, ptcpoff, &lineoff, &linelen))
++		return 0;
++
++	*phdrsoff = *ptcpoff;
++	while (nf_mime_nextline(ptcp, tcplen, ptcpoff, &lineoff, &linelen)) {
++		if (linelen == 0) {
++			if (entitylen > 0)
++				*ptcpoff += min(entitylen, tcplen - *ptcpoff);
++			break;
++		}
++		if (lineoff+linelen > tcplen) {
++			INFOP("!! overrun !!\n");
++			break;
++		}
++
++		if (nf_strncasecmp(ptcp+lineoff, "CSeq:", 5) == 0) {
++			*pcseqoff = lineoff;
++			*pcseqlen = linelen;
++		}
++
++		if (nf_strncasecmp(ptcp+lineoff, "Transport:", 10) == 0) {
++			*transoff = lineoff;
++			*translen = linelen;
++		}
++
++		if (nf_strncasecmp(ptcp+lineoff, "Content-Length:", 15) == 0) {
++			uint off = lineoff+15;
++			SKIP_WSPACE(ptcp+lineoff, linelen, off);
++			nf_strtou32(ptcp+off, &entitylen);
++		}
++	}
++	*phdrslen = (*ptcpoff) - (*phdrsoff);
++
++	return 1;
++}
++
++/*
++ * Find lo/hi client ports (if any) in transport header
++ * In:
++ *   ptcp, tcplen = packet
++ *   tranoff, tranlen = buffer to search
++ *
++ * Out:
++ *   pport_lo, pport_hi = lo/hi ports (host endian)
++ *
++ * Returns nonzero if any client ports found
++ *
++ * Note: it is valid (and expected) for the client to request multiple
++ * transports, so we need to parse the entire line.
++ */
++static int
++rtsp_parse_transport(char* ptran, uint tranlen,
++                     struct ip_ct_rtsp_expect* prtspexp)
++{
++	int     rc = 0;
++	uint    off = 0;
++
++	if (tranlen < 10 || !iseol(ptran[tranlen-1]) ||
++	    nf_strncasecmp(ptran, "Transport:", 10) != 0) {
++		INFOP("sanity check failed\n");
++		return 0;
++	}
++
++	DEBUGP("tran='%.*s'\n", (int)tranlen, ptran);
++	off += 10;
++	SKIP_WSPACE(ptran, tranlen, off);
++
++	/* Transport: tran;field;field=val,tran;field;field=val,... */
++	while (off < tranlen) {
++		const char* pparamend;
++		uint        nextparamoff;
++
++		pparamend = memchr(ptran+off, ',', tranlen-off);
++		pparamend = (pparamend == NULL) ? ptran+tranlen : pparamend+1;
++		nextparamoff = pparamend-ptran;
++
++		while (off < nextparamoff) {
++			const char* pfieldend;
++			uint        nextfieldoff;
++
++			pfieldend = memchr(ptran+off, ';', nextparamoff-off);
++			nextfieldoff = (pfieldend == NULL) ? nextparamoff : pfieldend-ptran+1;
++
++			if (strncmp(ptran+off, "client_port=", 12) == 0) {
++				u_int16_t   port;
++				uint        numlen;
++
++				off += 12;
++				numlen = nf_strtou16(ptran+off, &port);
++				off += numlen;
++				if (prtspexp->loport != 0 && prtspexp->loport != port)
++					DEBUGP("multiple ports found, port %hu ignored\n", port);
++				else {
++					DEBUGP("lo port found : %hu\n", port);
++					prtspexp->loport = prtspexp->hiport = port;
++					if (ptran[off] == '-') {
++						off++;
++						numlen = nf_strtou16(ptran+off, &port);
++						off += numlen;
++						prtspexp->pbtype = pb_range;
++						prtspexp->hiport = port;
++
++						// If we have a range, assume rtp:
++						// loport must be even, hiport must be loport+1
++						if ((prtspexp->loport & 0x0001) != 0 ||
++						    prtspexp->hiport != prtspexp->loport+1) {
++							DEBUGP("incorrect range: %hu-%hu, correcting\n",
++							       prtspexp->loport, prtspexp->hiport);
++							prtspexp->loport &= 0xfffe;
++							prtspexp->hiport = prtspexp->loport+1;
++						}
++					} else if (ptran[off] == '/') {
++						off++;
++						numlen = nf_strtou16(ptran+off, &port);
++						off += numlen;
++						prtspexp->pbtype = pb_discon;
++						prtspexp->hiport = port;
++					}
++					rc = 1;
++				}
++			}
++
++			/*
++			 * Note we don't look for the destination parameter here.
++			 * If we are using NAT, the NAT module will handle it.  If not,
++			 * and the client is sending packets elsewhere, the expectation
++			 * will quietly time out.
++			 */
++
++			off = nextfieldoff;
++		}
++
++		off = nextparamoff;
++	}
++
++	return rc;
++}
++
++void expected(struct nf_conn *ct, struct nf_conntrack_expect *exp)
++{
++    if(nf_nat_rtsp_hook_expectfn) {
++        nf_nat_rtsp_hook_expectfn(ct,exp);
++    }
++}
++
++/*** conntrack functions ***/
++
++/* outbound packet: client->server */
++
++static inline int
++help_out(struct sk_buff *skb, unsigned char *rb_ptr, unsigned int datalen,
++                struct nf_conn *ct, enum ip_conntrack_info ctinfo)
++{
++	struct ip_ct_rtsp_expect expinfo;
++
++	int dir = CTINFO2DIR(ctinfo);   /* = IP_CT_DIR_ORIGINAL */
++	//struct  tcphdr* tcph = (void*)iph + iph->ihl * 4;
++	//uint    tcplen = pktlen - iph->ihl * 4;
++	char*   pdata = rb_ptr;
++	//uint    datalen = tcplen - tcph->doff * 4;
++	uint    dataoff = 0;
++	int ret = NF_ACCEPT;
++
++	struct nf_conntrack_expect *exp;
++
++	__be16 be_loport;
++
++	memset(&expinfo, 0, sizeof(expinfo));
++
++	while (dataoff < datalen) {
++		uint    cmdoff = dataoff;
++		uint    hdrsoff = 0;
++		uint    hdrslen = 0;
++		uint    cseqoff = 0;
++		uint    cseqlen = 0;
++		uint    transoff = 0;
++		uint    translen = 0;
++		uint    off;
++
++		if (!rtsp_parse_message(pdata, datalen, &dataoff,
++					&hdrsoff, &hdrslen,
++					&cseqoff, &cseqlen,
++					&transoff, &translen))
++			break;      /* not a valid message */
++
++		if (strncmp(pdata+cmdoff, "SETUP ", 6) != 0)
++			continue;   /* not a SETUP message */
++		DEBUGP("found a setup message\n");
++
++		off = 0;
++		if(translen) {
++			rtsp_parse_transport(pdata+transoff, translen, &expinfo);
++		}
++
++		if (expinfo.loport == 0) {
++			DEBUGP("no udp transports found\n");
++			continue;   /* no udp transports found */
++		}
++
++		DEBUGP("udp transport found, ports=(%d,%hu,%hu)\n",
++		       (int)expinfo.pbtype, expinfo.loport, expinfo.hiport);
++
++		exp = nf_ct_expect_alloc(ct);
++		if (!exp) {
++			ret = NF_DROP;
++			goto out;
++		}
++
++		be_loport = htons(expinfo.loport);
++
++		nf_ct_expect_init(exp, NF_CT_EXPECT_CLASS_DEFAULT,
++			ct->tuplehash[!dir].tuple.src.l3num,
++			&ct->tuplehash[!dir].tuple.src.u3, &ct->tuplehash[!dir].tuple.dst.u3,
++			IPPROTO_UDP, NULL, &be_loport);
++
++		exp->master = ct;
++
++		exp->expectfn = expected;
++		exp->flags = 0;
++
++		if (expinfo.pbtype == pb_range) {
++			DEBUGP("Changing expectation mask to handle multiple ports\n");
++			exp->mask.src.u.udp.port  = 0xfffe;
++		}
++
++		DEBUGP("expect_related %u.%u.%u.%u:%u-%u.%u.%u.%u:%u\n",
++		       NIPQUAD(exp->tuple.src.u3.ip),
++		       ntohs(exp->tuple.src.u.udp.port),
++		       NIPQUAD(exp->tuple.dst.u3.ip),
++		       ntohs(exp->tuple.dst.u.udp.port));
++
++		if (nf_nat_rtsp_hook)
++			/* pass the request off to the nat helper */
++			ret = nf_nat_rtsp_hook(skb, ctinfo, hdrsoff, hdrslen, &expinfo, exp);
++		else if (nf_ct_expect_related(exp) != 0) {
++			INFOP("nf_ct_expect_related failed\n");
++			ret  = NF_DROP;
++		}
++		nf_ct_expect_put(exp);
++		goto out;
++	}
++out:
++
++	return ret;
++}
++
++
++static inline int
++help_in(struct sk_buff *skb, size_t pktlen,
++ struct nf_conn* ct, enum ip_conntrack_info ctinfo)
++{
++ return NF_ACCEPT;
++}
++
++static int help(struct sk_buff *skb, unsigned int protoff,
++		struct nf_conn *ct, enum ip_conntrack_info ctinfo)
++{
++	struct tcphdr _tcph, *th;
++	unsigned int dataoff, datalen;
++	char *rb_ptr;
++	int ret = NF_DROP;
++
++	/* Until there's been traffic both ways, don't look in packets. */
++	if (ctinfo != IP_CT_ESTABLISHED &&
++	    ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY) {
++		DEBUGP("conntrackinfo = %u\n", ctinfo);
++		return NF_ACCEPT;
++	}
++
++	/* Not whole TCP header? */
++	th = skb_header_pointer(skb, protoff, sizeof(_tcph), &_tcph);
++
++	if (!th)
++		return NF_ACCEPT;
++
++	/* No data ? */
++	dataoff = protoff + th->doff*4;
++	datalen = skb->len - dataoff;
++	if (dataoff >= skb->len)
++		return NF_ACCEPT;
++
++	spin_lock_bh(&rtsp_buffer_lock);
++	rb_ptr = skb_header_pointer(skb, dataoff,
++				    skb->len - dataoff, rtsp_buffer);
++	BUG_ON(rb_ptr == NULL);
++
++#if 0
++	/* Checksum invalid?  Ignore. */
++	/* FIXME: Source route IP option packets --RR */
++	if (tcp_v4_check(tcph, tcplen, iph->saddr, iph->daddr,
++			 csum_partial((char*)tcph, tcplen, 0)))
++	{
++		DEBUGP("bad csum: %p %u %u.%u.%u.%u %u.%u.%u.%u\n",
++		       tcph, tcplen, NIPQUAD(iph->saddr), NIPQUAD(iph->daddr));
++		return NF_ACCEPT;
++	}
++#endif
++
++	switch (CTINFO2DIR(ctinfo)) {
++	case IP_CT_DIR_ORIGINAL:
++		ret = help_out(skb, rb_ptr, datalen, ct, ctinfo);
++		break;
++	case IP_CT_DIR_REPLY:
++		DEBUGP("IP_CT_DIR_REPLY\n");
++		/* inbound packet: server->client */
++		ret = NF_ACCEPT;
++		break;
++	}
++
++	spin_unlock_bh(&rtsp_buffer_lock);
++
++	return ret;
++}
++
++static struct nf_conntrack_helper rtsp_helpers[MAX_PORTS];
++static char rtsp_names[MAX_PORTS][10];
++static struct nf_conntrack_expect_policy rtsp_expect_policy;
++
++/* This function is intentionally _NOT_ defined as __exit */
++static void
++fini(void)
++{
++	int i;
++	for (i = 0; i < num_ports; i++) {
++		DEBUGP("unregistering port %d\n", ports[i]);
++		nf_conntrack_helper_unregister(&rtsp_helpers[i]);
++	}
++	kfree(rtsp_buffer);
++}
++
++static int __init
++init(void)
++{
++	int i, ret;
++	struct nf_conntrack_helper *hlpr;
++	char *tmpname;
++
++	printk("nf_conntrack_rtsp v" IP_NF_RTSP_VERSION " loading\n");
++
++	if (max_outstanding < 1) {
++		printk("nf_conntrack_rtsp: max_outstanding must be a positive integer\n");
++		return -EBUSY;
++	}
++	if (setup_timeout < 0) {
++		printk("nf_conntrack_rtsp: setup_timeout must be a positive integer\n");
++		return -EBUSY;
++	}
++
++	rtsp_expect_policy.max_expected = max_outstanding;
++	rtsp_expect_policy.timeout = setup_timeout;
++
++	rtsp_buffer = kmalloc(65536, GFP_KERNEL);
++	if (!rtsp_buffer)
++		return -ENOMEM;
++
++	/* If no port given, default to standard rtsp port */
++	if (ports[0] == 0) {
++		ports[0] = RTSP_PORT;
++	}
++
++	for (i = 0; (i < MAX_PORTS) && ports[i]; i++) {
++		hlpr = &rtsp_helpers[i];
++		memset(hlpr, 0, sizeof(struct nf_conntrack_helper));
++		hlpr->tuple.src.u.tcp.port = htons(ports[i]);
++		hlpr->tuple.dst.protonum = IPPROTO_TCP;
++		hlpr->expect_policy = &rtsp_expect_policy;
++		hlpr->me = THIS_MODULE;
++		hlpr->help = help;
++
++		tmpname = &rtsp_names[i][0];
++		if (ports[i] == RTSP_PORT) {
++			sprintf(tmpname, "rtsp");
++		} else {
++			sprintf(tmpname, "rtsp-%d", i);
++		}
++		hlpr->name = tmpname;
++
++		DEBUGP("port #%d: %d\n", i, ports[i]);
++
++		ret = nf_conntrack_helper_register(hlpr);
++
++		if (ret) {
++			printk("nf_conntrack_rtsp: ERROR registering port %d\n", ports[i]);
++			fini();
++			return -EBUSY;
++		}
++		num_ports++;
++	}
++	return 0;
++}
++
++module_init(init);
++module_exit(fini);
++
++EXPORT_SYMBOL(nf_nat_rtsp_hook_expectfn);
++
+--- /dev/null
++++ b/net/ipv4/netfilter/nf_nat_rtsp.c
+@@ -0,0 +1,496 @@
++/*
++ * RTSP extension for TCP NAT alteration
++ * (C) 2003 by Tom Marshall <tmarshall at real.com>
++ * based on ip_nat_irc.c
++ *
++ *      This program is free software; you can redistribute it and/or
++ *      modify it under the terms of the GNU General Public License
++ *      as published by the Free Software Foundation; either version
++ *      2 of the License, or (at your option) any later version.
++ *
++ * Module load syntax:
++ *      insmod nf_nat_rtsp.o ports=port1,port2,...port<MAX_PORTS>
++ *                           stunaddr=<address>
++ *                           destaction=[auto|strip|none]
++ *
++ * If no ports are specified, the default will be port 554 only.
++ *
++ * stunaddr specifies the address used to detect that a client is using STUN.
++ * If this address is seen in the destination parameter, it is assumed that
++ * the client has already punched a UDP hole in the firewall, so we don't
++ * mangle the client_port.  If none is specified, it is autodetected.  It
++ * only needs to be set if you have multiple levels of NAT.  It should be
++ * set to the external address that the STUN clients detect.  Note that in
++ * this case, it will not be possible for clients to use UDP with servers
++ * between the NATs.
++ *
++ * If no destaction is specified, auto is used.
++ *   destaction=auto:  strip destination parameter if it is not stunaddr.
++ *   destaction=strip: always strip destination parameter (not recommended).
++ *   destaction=none:  do not touch destination parameter (not recommended).
++ */
++
++#include <linux/module.h>
++#include <net/tcp.h>
++#include <net/netfilter/nf_nat_helper.h>
++#include <net/netfilter/nf_nat_rule.h>
++#include <linux/netfilter/nf_conntrack_rtsp.h>
++#include <net/netfilter/nf_conntrack_expect.h>
++
++#include <linux/inet.h>
++#include <linux/ctype.h>
++#define NF_NEED_STRNCASECMP
++#define NF_NEED_STRTOU16
++#include <linux/netfilter_helpers.h>
++#define NF_NEED_MIME_NEXTLINE
++#include <linux/netfilter_mime.h>
++
++#define INFOP(fmt, args...) printk(KERN_INFO "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
++#if 0
++#define DEBUGP(fmt, args...) printk(KERN_DEBUG "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
++#else
++#define DEBUGP(fmt, args...)
++#endif
++
++#define MAX_PORTS       8
++#define DSTACT_AUTO     0
++#define DSTACT_STRIP    1
++#define DSTACT_NONE     2
++
++static char*    stunaddr = NULL;
++static char*    destaction = NULL;
++
++static u_int32_t extip = 0;
++static int       dstact = 0;
++
++MODULE_AUTHOR("Tom Marshall <tmarshall at real.com>");
++MODULE_DESCRIPTION("RTSP network address translation module");
++MODULE_LICENSE("GPL");
++module_param(stunaddr, charp, 0644);
++MODULE_PARM_DESC(stunaddr, "Address for detecting STUN");
++module_param(destaction, charp, 0644);
++MODULE_PARM_DESC(destaction, "Action for destination parameter (auto/strip/none)");
++
++#define SKIP_WSPACE(ptr,len,off) while(off < len && isspace(*(ptr+off))) { off++; }
++
++/*** helper functions ***/
++
++static void
++get_skb_tcpdata(struct sk_buff* skb, char** pptcpdata, uint* ptcpdatalen)
++{
++    struct iphdr*   iph  = ip_hdr(skb);
++    struct tcphdr*  tcph = (void *)iph + ip_hdrlen(skb);
++
++    *pptcpdata = (char*)tcph +  tcph->doff*4;
++    *ptcpdatalen = ((char*)skb_transport_header(skb) + skb->len) - *pptcpdata;
++}
++
++/*** nat functions ***/
++
++/*
++ * Mangle the "Transport:" header:
++ *   - Replace all occurences of "client_port=<spec>"
++ *   - Handle destination parameter
++ *
++ * In:
++ *   ct, ctinfo = conntrack context
++ *   skb        = packet
++ *   tranoff    = Transport header offset from TCP data
++ *   tranlen    = Transport header length (incl. CRLF)
++ *   rport_lo   = replacement low  port (host endian)
++ *   rport_hi   = replacement high port (host endian)
++ *
++ * Returns packet size difference.
++ *
++ * Assumes that a complete transport header is present, ending with CR or LF
++ */
++static int
++rtsp_mangle_tran(enum ip_conntrack_info ctinfo,
++                 struct nf_conntrack_expect* exp,
++								 struct ip_ct_rtsp_expect* prtspexp,
++                 struct sk_buff* skb, uint tranoff, uint tranlen)
++{
++    char*       ptcp;
++    uint        tcplen;
++    char*       ptran;
++    char        rbuf1[16];      /* Replacement buffer (one port) */
++    uint        rbuf1len;       /* Replacement len (one port) */
++    char        rbufa[16];      /* Replacement buffer (all ports) */
++    uint        rbufalen;       /* Replacement len (all ports) */
++    u_int32_t   newip;
++    u_int16_t   loport, hiport;
++    uint        off = 0;
++    uint        diff;           /* Number of bytes we removed */
++
++    struct nf_conn *ct = exp->master;
++    struct nf_conntrack_tuple *t;
++
++    char    szextaddr[15+1];
++    uint    extaddrlen;
++    int     is_stun;
++
++    get_skb_tcpdata(skb, &ptcp, &tcplen);
++    ptran = ptcp+tranoff;
++
++    if (tranoff+tranlen > tcplen || tcplen-tranoff < tranlen ||
++        tranlen < 10 || !iseol(ptran[tranlen-1]) ||
++        nf_strncasecmp(ptran, "Transport:", 10) != 0)
++    {
++        INFOP("sanity check failed\n");
++        return 0;
++    }
++    off += 10;
++    SKIP_WSPACE(ptcp+tranoff, tranlen, off);
++
++    newip = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip;
++    t = &exp->tuple;
++    t->dst.u3.ip = newip;
++
++    extaddrlen = extip ? sprintf(szextaddr, "%u.%u.%u.%u", NIPQUAD(extip))
++                       : sprintf(szextaddr, "%u.%u.%u.%u", NIPQUAD(newip));
++    DEBUGP("stunaddr=%s (%s)\n", szextaddr, (extip?"forced":"auto"));
++
++    rbuf1len = rbufalen = 0;
++    switch (prtspexp->pbtype)
++    {
++    case pb_single:
++        for (loport = prtspexp->loport; loport != 0; loport++) /* XXX: improper wrap? */
++        {
++            t->dst.u.udp.port = htons(loport);
++            if (nf_ct_expect_related(exp) == 0)
++            {
++                DEBUGP("using port %hu\n", loport);
++                break;
++            }
++        }
++        if (loport != 0)
++        {
++            rbuf1len = sprintf(rbuf1, "%hu", loport);
++            rbufalen = sprintf(rbufa, "%hu", loport);
++        }
++        break;
++    case pb_range:
++        for (loport = prtspexp->loport; loport != 0; loport += 2) /* XXX: improper wrap? */
++        {
++            t->dst.u.udp.port = htons(loport);
++            if (nf_ct_expect_related(exp) == 0)
++            {
++                hiport = loport + ~exp->mask.src.u.udp.port;
++                DEBUGP("using ports %hu-%hu\n", loport, hiport);
++                break;
++            }
++        }
++        if (loport != 0)
++        {
++            rbuf1len = sprintf(rbuf1, "%hu", loport);
++            rbufalen = sprintf(rbufa, "%hu-%hu", loport, loport+1);
++        }
++        break;
++    case pb_discon:
++        for (loport = prtspexp->loport; loport != 0; loport++) /* XXX: improper wrap? */
++        {
++            t->dst.u.udp.port = htons(loport);
++            if (nf_ct_expect_related(exp) == 0)
++            {
++                DEBUGP("using port %hu (1 of 2)\n", loport);
++                break;
++            }
++        }
++        for (hiport = prtspexp->hiport; hiport != 0; hiport++) /* XXX: improper wrap? */
++        {
++            t->dst.u.udp.port = htons(hiport);
++            if (nf_ct_expect_related(exp) == 0)
++            {
++                DEBUGP("using port %hu (2 of 2)\n", hiport);
++                break;
++            }
++        }
++        if (loport != 0 && hiport != 0)
++        {
++            rbuf1len = sprintf(rbuf1, "%hu", loport);
++            if (hiport == loport+1)
++            {
++                rbufalen = sprintf(rbufa, "%hu-%hu", loport, hiport);
++            }
++            else
++            {
++                rbufalen = sprintf(rbufa, "%hu/%hu", loport, hiport);
++            }
++        }
++        break;
++    }
++
++    if (rbuf1len == 0)
++    {
++        return 0;   /* cannot get replacement port(s) */
++    }
++
++    /* Transport: tran;field;field=val,tran;field;field=val,... */
++    while (off < tranlen)
++    {
++        uint        saveoff;
++        const char* pparamend;
++        uint        nextparamoff;
++
++        pparamend = memchr(ptran+off, ',', tranlen-off);
++        pparamend = (pparamend == NULL) ? ptran+tranlen : pparamend+1;
++        nextparamoff = pparamend-ptcp;
++
++        /*
++         * We pass over each param twice.  On the first pass, we look for a
++         * destination= field.  It is handled by the security policy.  If it
++         * is present, allowed, and equal to our external address, we assume
++         * that STUN is being used and we leave the client_port= field alone.
++         */
++        is_stun = 0;
++        saveoff = off;
++        while (off < nextparamoff)
++        {
++            const char* pfieldend;
++            uint        nextfieldoff;
++
++            pfieldend = memchr(ptran+off, ';', nextparamoff-off);
++            nextfieldoff = (pfieldend == NULL) ? nextparamoff : pfieldend-ptran+1;
++
++            if (dstact != DSTACT_NONE && strncmp(ptran+off, "destination=", 12) == 0)
++            {
++                if (strncmp(ptran+off+12, szextaddr, extaddrlen) == 0)
++                {
++                    is_stun = 1;
++                }
++                if (dstact == DSTACT_STRIP || (dstact == DSTACT_AUTO && !is_stun))
++                {
++                    diff = nextfieldoff-off;
++                    if (!nf_nat_mangle_tcp_packet(skb, ct, ctinfo,
++                                                         off, diff, NULL, 0))
++                    {
++                        /* mangle failed, all we can do is bail */
++			nf_ct_unexpect_related(exp);
++                        return 0;
++                    }
++                    get_skb_tcpdata(skb, &ptcp, &tcplen);
++                    ptran = ptcp+tranoff;
++                    tranlen -= diff;
++                    nextparamoff -= diff;
++                    nextfieldoff -= diff;
++                }
++            }
++
++            off = nextfieldoff;
++        }
++        if (is_stun)
++        {
++            continue;
++        }
++        off = saveoff;
++        while (off < nextparamoff)
++        {
++            const char* pfieldend;
++            uint        nextfieldoff;
++
++            pfieldend = memchr(ptran+off, ';', nextparamoff-off);
++            nextfieldoff = (pfieldend == NULL) ? nextparamoff : pfieldend-ptran+1;
++
++            if (strncmp(ptran+off, "client_port=", 12) == 0)
++            {
++                u_int16_t   port;
++                uint        numlen;
++                uint        origoff;
++                uint        origlen;
++                char*       rbuf    = rbuf1;
++                uint        rbuflen = rbuf1len;
++
++                off += 12;
++                origoff = (ptran-ptcp)+off;
++                origlen = 0;
++                numlen = nf_strtou16(ptran+off, &port);
++                off += numlen;
++                origlen += numlen;
++                if (port != prtspexp->loport)
++                {
++                    DEBUGP("multiple ports found, port %hu ignored\n", port);
++                }
++                else
++                {
++                    if (ptran[off] == '-' || ptran[off] == '/')
++                    {
++                        off++;
++                        origlen++;
++                        numlen = nf_strtou16(ptran+off, &port);
++                        off += numlen;
++                        origlen += numlen;
++                        rbuf = rbufa;
++                        rbuflen = rbufalen;
++                    }
++
++                    /*
++                     * note we cannot just memcpy() if the sizes are the same.
++                     * the mangle function does skb resizing, checks for a
++                     * cloned skb, and updates the checksums.
++                     *
++                     * parameter 4 below is offset from start of tcp data.
++                     */
++                    diff = origlen-rbuflen;
++                    if (!nf_nat_mangle_tcp_packet(skb, ct, ctinfo,
++                                              origoff, origlen, rbuf, rbuflen))
++                    {
++                        /* mangle failed, all we can do is bail */
++			nf_ct_unexpect_related(exp);
++                        return 0;
++                    }
++                    get_skb_tcpdata(skb, &ptcp, &tcplen);
++                    ptran = ptcp+tranoff;
++                    tranlen -= diff;
++                    nextparamoff -= diff;
++                    nextfieldoff -= diff;
++                }
++            }
++
++            off = nextfieldoff;
++        }
++
++        off = nextparamoff;
++    }
++
++    return 1;
++}
++
++static uint
++help_out(struct sk_buff *skb, enum ip_conntrack_info ctinfo,
++	 unsigned int matchoff, unsigned int matchlen, struct ip_ct_rtsp_expect* prtspexp,
++	 struct nf_conntrack_expect* exp)
++{
++    char*   ptcp;
++    uint    tcplen;
++    uint    hdrsoff;
++    uint    hdrslen;
++    uint    lineoff;
++    uint    linelen;
++    uint    off;
++
++    //struct iphdr* iph = (struct iphdr*)skb->nh.iph;
++    //struct tcphdr* tcph = (struct tcphdr*)((void*)iph + iph->ihl*4);
++
++    get_skb_tcpdata(skb, &ptcp, &tcplen);
++    hdrsoff = matchoff;//exp->seq - ntohl(tcph->seq);
++    hdrslen = matchlen;
++    off = hdrsoff;
++    DEBUGP("NAT rtsp help_out\n");
++
++    while (nf_mime_nextline(ptcp, hdrsoff+hdrslen, &off, &lineoff, &linelen))
++    {
++        if (linelen == 0)
++        {
++            break;
++        }
++        if (off > hdrsoff+hdrslen)
++        {
++            INFOP("!! overrun !!");
++            break;
++        }
++        DEBUGP("hdr: len=%u, %.*s", linelen, (int)linelen, ptcp+lineoff);
++
++        if (nf_strncasecmp(ptcp+lineoff, "Transport:", 10) == 0)
++        {
++            uint oldtcplen = tcplen;
++	    DEBUGP("hdr: Transport\n");
++            if (!rtsp_mangle_tran(ctinfo, exp, prtspexp, skb, lineoff, linelen))
++            {
++		DEBUGP("hdr: Transport mangle failed");
++                break;
++            }
++            get_skb_tcpdata(skb, &ptcp, &tcplen);
++            hdrslen -= (oldtcplen-tcplen);
++            off -= (oldtcplen-tcplen);
++            lineoff -= (oldtcplen-tcplen);
++            linelen -= (oldtcplen-tcplen);
++            DEBUGP("rep: len=%u, %.*s", linelen, (int)linelen, ptcp+lineoff);
++        }
++    }
++
++    return NF_ACCEPT;
++}
++
++static unsigned int
++help(struct sk_buff *skb, enum ip_conntrack_info ctinfo,
++     unsigned int matchoff, unsigned int matchlen, struct ip_ct_rtsp_expect* prtspexp,
++     struct nf_conntrack_expect* exp)
++{
++    int dir = CTINFO2DIR(ctinfo);
++    int rc = NF_ACCEPT;
++
++    switch (dir)
++    {
++    case IP_CT_DIR_ORIGINAL:
++        rc = help_out(skb, ctinfo, matchoff, matchlen, prtspexp, exp);
++        break;
++    case IP_CT_DIR_REPLY:
++	DEBUGP("unmangle ! %u\n", ctinfo);
++    	/* XXX: unmangle */
++	rc = NF_ACCEPT;
++        break;
++    }
++    //UNLOCK_BH(&ip_rtsp_lock);
++
++    return rc;
++}
++
++static void expected(struct nf_conn* ct, struct nf_conntrack_expect *exp)
++{
++    struct nf_nat_multi_range_compat mr;
++    u_int32_t newdstip, newsrcip, newip;
++
++    struct nf_conn *master = ct->master;
++
++    newdstip = master->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
++    newsrcip = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
++    //FIXME (how to port that ?)
++    //code from 2.4 : newip = (HOOK2MANIP(hooknum) == IP_NAT_MANIP_SRC) ? newsrcip : newdstip;
++    newip = newdstip;
++
++    DEBUGP("newsrcip=%u.%u.%u.%u, newdstip=%u.%u.%u.%u, newip=%u.%u.%u.%u\n",
++           NIPQUAD(newsrcip), NIPQUAD(newdstip), NIPQUAD(newip));
++
++    mr.rangesize = 1;
++    // We don't want to manip the per-protocol, just the IPs.
++    mr.range[0].flags = IP_NAT_RANGE_MAP_IPS;
++    mr.range[0].min_ip = mr.range[0].max_ip = newip;
++
++    nf_nat_setup_info(ct, &mr.range[0], IP_NAT_MANIP_DST);
++}
++
++
++static void __exit fini(void)
++{
++	nf_nat_rtsp_hook = NULL;
++        nf_nat_rtsp_hook_expectfn = NULL;
++	synchronize_net();
++}
++
++static int __init init(void)
++{
++	printk("nf_nat_rtsp v" IP_NF_RTSP_VERSION " loading\n");
++
++	BUG_ON(nf_nat_rtsp_hook);
++	nf_nat_rtsp_hook = help;
++        nf_nat_rtsp_hook_expectfn = &expected;
++
++	if (stunaddr != NULL)
++		extip = in_aton(stunaddr);
++
++	if (destaction != NULL) {
++	        if (strcmp(destaction, "auto") == 0)
++			dstact = DSTACT_AUTO;
++
++		if (strcmp(destaction, "strip") == 0)
++			dstact = DSTACT_STRIP;
++
++		if (strcmp(destaction, "none") == 0)
++			dstact = DSTACT_NONE;
++	}
++
++	return 0;
++}
++
++module_init(init);
++module_exit(fini);
diff --git a/target/linux/generic/patches-2.6.31/200-sched_esfq.patch b/target/linux/generic/patches-2.6.31/200-sched_esfq.patch
new file mode 100644
index 0000000000..f3636e6521
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/200-sched_esfq.patch
@@ -0,0 +1,795 @@
+--- a/include/linux/pkt_sched.h
++++ b/include/linux/pkt_sched.h
+@@ -182,8 +182,37 @@ struct tc_sfq_xstats
+  *
+  *	The only reason for this is efficiency, it is possible
+  *	to change these parameters in compile time.
++ *
++ *	If you need to play with these values, use esfq instead.
+  */
+ 
++/* ESFQ section */
++
++enum
++{
++        /* traditional */
++	TCA_SFQ_HASH_CLASSIC,
++	TCA_SFQ_HASH_DST,
++	TCA_SFQ_HASH_SRC,
++	TCA_SFQ_HASH_FWMARK,
++	/* conntrack */
++	TCA_SFQ_HASH_CTORIGDST,
++	TCA_SFQ_HASH_CTORIGSRC,
++	TCA_SFQ_HASH_CTREPLDST,
++	TCA_SFQ_HASH_CTREPLSRC,
++	TCA_SFQ_HASH_CTNATCHG,
++};
++
++struct tc_esfq_qopt
++{
++	unsigned	quantum;	/* Bytes per round allocated to flow */
++	int		perturb_period;	/* Period of hash perturbation */
++	__u32		limit;		/* Maximal packets in queue */
++	unsigned	divisor;	/* Hash divisor  */
++	unsigned	flows;		/* Maximal number of flows  */
++	unsigned	hash_kind;	/* Hash function to use for flow identification */
++};
++
+ /* RED section */
+ 
+ enum
+--- a/net/sched/Kconfig
++++ b/net/sched/Kconfig
+@@ -137,6 +137,37 @@ config NET_SCH_SFQ
+ 	  To compile this code as a module, choose M here: the
+ 	  module will be called sch_sfq.
+ 
++config NET_SCH_ESFQ
++	tristate "Enhanced Stochastic Fairness Queueing (ESFQ)"
++	---help---
++	  Say Y here if you want to use the Enhanced Stochastic Fairness
++	  Queueing (ESFQ) packet scheduling algorithm for some of your network
++	  devices or as a leaf discipline for a classful qdisc such as HTB or
++	  CBQ (see the top of <file:net/sched/sch_esfq.c> for details and
++	  references to the SFQ algorithm).
++
++	  This is an enchanced SFQ version which allows you to control some
++	  hardcoded values in the SFQ scheduler.
++
++	  ESFQ also adds control of the hash function used to identify packet
++	  flows. The original SFQ discipline hashes by connection; ESFQ add
++	  several other hashing methods, such as by src IP or by dst IP, which
++	  can be more fair to users in some networking situations.
++
++	  To compile this code as a module, choose M here: the
++	  module will be called sch_esfq.
++
++config NET_SCH_ESFQ_NFCT
++	bool "Connection Tracking Hash Types"
++	depends on NET_SCH_ESFQ && NF_CONNTRACK
++	---help---
++	  Say Y here to enable support for hashing based on netfilter connection
++	  tracking information. This is useful for a router that is also using
++	  NAT to connect privately-addressed hosts to the Internet. If you want
++	  to provide fair distribution of upstream bandwidth, ESFQ must use
++	  connection tracking information, since all outgoing packets will share
++	  the same source address.
++
+ config NET_SCH_TEQL
+ 	tristate "True Link Equalizer (TEQL)"
+ 	---help---
+--- a/net/sched/Makefile
++++ b/net/sched/Makefile
+@@ -24,6 +24,7 @@ obj-$(CONFIG_NET_SCH_GRED)	+= sch_gred.o
+ obj-$(CONFIG_NET_SCH_INGRESS)	+= sch_ingress.o 
+ obj-$(CONFIG_NET_SCH_DSMARK)	+= sch_dsmark.o
+ obj-$(CONFIG_NET_SCH_SFQ)	+= sch_sfq.o
++obj-$(CONFIG_NET_SCH_ESFQ)	+= sch_esfq.o
+ obj-$(CONFIG_NET_SCH_TBF)	+= sch_tbf.o
+ obj-$(CONFIG_NET_SCH_TEQL)	+= sch_teql.o
+ obj-$(CONFIG_NET_SCH_PRIO)	+= sch_prio.o
+--- /dev/null
++++ b/net/sched/sch_esfq.c
+@@ -0,0 +1,702 @@
++/*
++ * net/sched/sch_esfq.c	Extended Stochastic Fairness Queueing discipline.
++ *
++ *		This program is free software; you can redistribute it and/or
++ *		modify it under the terms of the GNU General Public License
++ *		as published by the Free Software Foundation; either version
++ *		2 of the License, or (at your option) any later version.
++ *
++ * Authors:	Alexey Kuznetsov, <kuznet@ms2.inr.ac.ru>
++ *
++ * Changes:	Alexander Atanasov, <alex@ssi.bg>
++ *		Added dynamic depth,limit,divisor,hash_kind options.
++ *		Added dst and src hashes.
++ *
++ * 		Alexander Clouter, <alex@digriz.org.uk>
++ *		Ported ESFQ to Linux 2.6.
++ *
++ * 		Corey Hickey, <bugfood-c@fatooh.org>
++ *		Maintenance of the Linux 2.6 port.
++ *		Added fwmark hash (thanks to Robert Kurjata).
++ *		Added usage of jhash.
++ *		Added conntrack support.
++ *		Added ctnatchg hash (thanks to Ben Pfountz).
++ */
++
++#include <linux/module.h>
++#include <asm/uaccess.h>
++#include <asm/system.h>
++#include <linux/bitops.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/jiffies.h>
++#include <linux/string.h>
++#include <linux/mm.h>
++#include <linux/socket.h>
++#include <linux/sockios.h>
++#include <linux/in.h>
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/if_ether.h>
++#include <linux/inet.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/notifier.h>
++#include <linux/init.h>
++#include <net/ip.h>
++#include <net/netlink.h>
++#include <linux/ipv6.h>
++#include <net/route.h>
++#include <linux/skbuff.h>
++#include <net/sock.h>
++#include <net/pkt_sched.h>
++#include <linux/jhash.h>
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++#include <net/netfilter/nf_conntrack.h>
++#endif
++
++/*	Stochastic Fairness Queuing algorithm.
++	For more comments look at sch_sfq.c.
++	The difference is that you can change limit, depth,
++	hash table size and choose alternate hash types.
++
++	classic:	same as in sch_sfq.c
++	dst:		destination IP address
++	src:		source IP address
++	fwmark:		netfilter mark value
++	ctorigdst:	original destination IP address
++	ctorigsrc:	original source IP address
++	ctrepldst:	reply destination IP address
++	ctreplsrc:	reply source IP
++
++*/
++
++#define ESFQ_HEAD 0
++#define ESFQ_TAIL 1
++
++/* This type should contain at least SFQ_DEPTH*2 values */
++typedef unsigned int esfq_index;
++
++struct esfq_head
++{
++	esfq_index	next;
++	esfq_index	prev;
++};
++
++struct esfq_sched_data
++{
++/* Parameters */
++	int		perturb_period;
++	unsigned	quantum;	/* Allotment per round: MUST BE >= MTU */
++	int		limit;
++	unsigned	depth;
++	unsigned	hash_divisor;
++	unsigned	hash_kind;
++/* Variables */
++	struct timer_list perturb_timer;
++	int		perturbation;
++	esfq_index	tail;		/* Index of current slot in round */
++	esfq_index	max_depth;	/* Maximal depth */
++
++	esfq_index	*ht;			/* Hash table */
++	esfq_index	*next;			/* Active slots link */
++	short		*allot;			/* Current allotment per slot */
++	unsigned short	*hash;			/* Hash value indexed by slots */
++	struct sk_buff_head	*qs;		/* Slot queue */
++	struct esfq_head	*dep;		/* Linked list of slots, indexed by depth */
++};
++
++/* This contains the info we will hash. */
++struct esfq_packet_info
++{
++	u32	proto;		/* protocol or port */
++	u32	src;		/* source from packet header */
++	u32	dst;		/* destination from packet header */
++	u32	ctorigsrc;	/* original source from conntrack */
++	u32	ctorigdst;	/* original destination from conntrack */
++	u32	ctreplsrc;	/* reply source from conntrack */
++	u32	ctrepldst;	/* reply destination from conntrack */
++	u32	mark;		/* netfilter mark (fwmark) */
++};
++
++static __inline__ unsigned esfq_jhash_1word(struct esfq_sched_data *q,u32 a)
++{
++	return jhash_1word(a, q->perturbation) & (q->hash_divisor-1);
++}
++
++static __inline__ unsigned esfq_jhash_2words(struct esfq_sched_data *q, u32 a, u32 b)
++{
++	return jhash_2words(a, b, q->perturbation) & (q->hash_divisor-1);
++}
++
++static __inline__ unsigned esfq_jhash_3words(struct esfq_sched_data *q, u32 a, u32 b, u32 c)
++{
++	return jhash_3words(a, b, c, q->perturbation) & (q->hash_divisor-1);
++}
++
++static unsigned esfq_hash(struct esfq_sched_data *q, struct sk_buff *skb)
++{
++	struct esfq_packet_info info;
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++	enum ip_conntrack_info ctinfo;
++	struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
++#endif
++
++	switch (skb->protocol) {
++	case __constant_htons(ETH_P_IP):
++	{
++		struct iphdr *iph = ip_hdr(skb);
++		info.dst = iph->daddr;
++		info.src = iph->saddr;
++		if (!(iph->frag_off&htons(IP_MF|IP_OFFSET)) &&
++		    (iph->protocol == IPPROTO_TCP ||
++		     iph->protocol == IPPROTO_UDP ||
++		     iph->protocol == IPPROTO_SCTP ||
++		     iph->protocol == IPPROTO_DCCP ||
++		     iph->protocol == IPPROTO_ESP))
++			info.proto = *(((u32*)iph) + iph->ihl);
++		else
++			info.proto = iph->protocol;
++		break;
++	}
++	case __constant_htons(ETH_P_IPV6):
++	{
++		struct ipv6hdr *iph = ipv6_hdr(skb);
++		/* Hash ipv6 addresses into a u32. This isn't ideal,
++		 * but the code is simple. */
++		info.dst = jhash2(iph->daddr.s6_addr32, 4, q->perturbation);
++		info.src = jhash2(iph->saddr.s6_addr32, 4, q->perturbation);
++		if (iph->nexthdr == IPPROTO_TCP ||
++		    iph->nexthdr == IPPROTO_UDP ||
++		    iph->nexthdr == IPPROTO_SCTP ||
++		    iph->nexthdr == IPPROTO_DCCP ||
++		    iph->nexthdr == IPPROTO_ESP)
++			info.proto = *(u32*)&iph[1];
++		else
++			info.proto = iph->nexthdr;
++		break;
++	}
++	default:
++		info.dst   = (u32)(unsigned long)skb_dst(skb);
++		info.src   = (u32)(unsigned long)skb->sk;
++		info.proto = skb->protocol;
++	}
++
++	info.mark = skb->mark;
++
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++	/* defaults if there is no conntrack info */
++	info.ctorigsrc = info.src;
++	info.ctorigdst = info.dst;
++	info.ctreplsrc = info.dst;
++	info.ctrepldst = info.src;
++	/* collect conntrack info */
++	if (ct && ct != &nf_conntrack_untracked) {
++		if (skb->protocol == __constant_htons(ETH_P_IP)) {
++			info.ctorigsrc = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
++			info.ctorigdst = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3.ip;
++			info.ctreplsrc = ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3.ip;
++			info.ctrepldst = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip;
++		}
++		else if (skb->protocol == __constant_htons(ETH_P_IPV6)) {
++			/* Again, hash ipv6 addresses into a single u32. */
++			info.ctorigsrc = jhash2(ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip6, 4, q->perturbation);
++			info.ctorigdst = jhash2(ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3.ip6, 4, q->perturbation);
++			info.ctreplsrc = jhash2(ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3.ip6, 4, q->perturbation);
++			info.ctrepldst = jhash2(ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip6, 4, q->perturbation);
++		}
++
++	}
++#endif
++
++	switch(q->hash_kind) {
++	case TCA_SFQ_HASH_CLASSIC:
++		return esfq_jhash_3words(q, info.dst, info.src, info.proto);
++	case TCA_SFQ_HASH_DST:
++		return esfq_jhash_1word(q, info.dst);
++	case TCA_SFQ_HASH_SRC:
++		return esfq_jhash_1word(q, info.src);
++	case TCA_SFQ_HASH_FWMARK:
++		return esfq_jhash_1word(q, info.mark);
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++	case TCA_SFQ_HASH_CTORIGDST:
++		return esfq_jhash_1word(q, info.ctorigdst);
++	case TCA_SFQ_HASH_CTORIGSRC:
++		return esfq_jhash_1word(q, info.ctorigsrc);
++	case TCA_SFQ_HASH_CTREPLDST:
++		return esfq_jhash_1word(q, info.ctrepldst);
++	case TCA_SFQ_HASH_CTREPLSRC:
++		return esfq_jhash_1word(q, info.ctreplsrc);
++	case TCA_SFQ_HASH_CTNATCHG:
++	{
++		if (info.ctorigdst == info.ctreplsrc)
++			return esfq_jhash_1word(q, info.ctorigsrc);
++		return esfq_jhash_1word(q, info.ctreplsrc);
++	}
++#endif
++	default:
++		if (net_ratelimit())
++			printk(KERN_WARNING "ESFQ: Unknown hash method. Falling back to classic.\n");
++	}
++	return esfq_jhash_3words(q, info.dst, info.src, info.proto);
++}
++
++static inline void esfq_link(struct esfq_sched_data *q, esfq_index x)
++{
++	esfq_index p, n;
++	int d = q->qs[x].qlen + q->depth;
++
++	p = d;
++	n = q->dep[d].next;
++	q->dep[x].next = n;
++	q->dep[x].prev = p;
++	q->dep[p].next = q->dep[n].prev = x;
++}
++
++static inline void esfq_dec(struct esfq_sched_data *q, esfq_index x)
++{
++	esfq_index p, n;
++
++	n = q->dep[x].next;
++	p = q->dep[x].prev;
++	q->dep[p].next = n;
++	q->dep[n].prev = p;
++
++	if (n == p && q->max_depth == q->qs[x].qlen + 1)
++		q->max_depth--;
++
++	esfq_link(q, x);
++}
++
++static inline void esfq_inc(struct esfq_sched_data *q, esfq_index x)
++{
++	esfq_index p, n;
++	int d;
++
++	n = q->dep[x].next;
++	p = q->dep[x].prev;
++	q->dep[p].next = n;
++	q->dep[n].prev = p;
++	d = q->qs[x].qlen;
++	if (q->max_depth < d)
++		q->max_depth = d;
++
++	esfq_link(q, x);
++}
++
++static unsigned int esfq_drop(struct Qdisc *sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_index d = q->max_depth;
++	struct sk_buff *skb;
++	unsigned int len;
++
++	/* Queue is full! Find the longest slot and
++	   drop a packet from it */
++
++	if (d > 1) {
++		esfq_index x = q->dep[d+q->depth].next;
++		skb = q->qs[x].prev;
++		len = skb->len;
++		__skb_unlink(skb, &q->qs[x]);
++		kfree_skb(skb);
++		esfq_dec(q, x);
++		sch->q.qlen--;
++		sch->qstats.drops++;
++		sch->qstats.backlog -= len;
++		return len;
++	}
++
++	if (d == 1) {
++		/* It is difficult to believe, but ALL THE SLOTS HAVE LENGTH 1. */
++		d = q->next[q->tail];
++		q->next[q->tail] = q->next[d];
++		q->allot[q->next[d]] += q->quantum;
++		skb = q->qs[d].prev;
++		len = skb->len;
++		__skb_unlink(skb, &q->qs[d]);
++		kfree_skb(skb);
++		esfq_dec(q, d);
++		sch->q.qlen--;
++		q->ht[q->hash[d]] = q->depth;
++		sch->qstats.drops++;
++		sch->qstats.backlog -= len;
++		return len;
++	}
++
++	return 0;
++}
++
++static void esfq_q_enqueue(struct sk_buff *skb, struct esfq_sched_data *q, unsigned int end)
++{
++	unsigned hash = esfq_hash(q, skb);
++	unsigned depth = q->depth;
++	esfq_index x;
++
++	x = q->ht[hash];
++	if (x == depth) {
++		q->ht[hash] = x = q->dep[depth].next;
++		q->hash[x] = hash;
++	}
++
++	if (end == ESFQ_TAIL)
++		__skb_queue_tail(&q->qs[x], skb);
++	else
++		__skb_queue_head(&q->qs[x], skb);
++
++	esfq_inc(q, x);
++	if (q->qs[x].qlen == 1) {		/* The flow is new */
++		if (q->tail == depth) {	/* It is the first flow */
++			q->tail = x;
++			q->next[x] = x;
++			q->allot[x] = q->quantum;
++		} else {
++			q->next[x] = q->next[q->tail];
++			q->next[q->tail] = x;
++			q->tail = x;
++		}
++	}
++}
++
++static int esfq_enqueue(struct sk_buff *skb, struct Qdisc* sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_q_enqueue(skb, q, ESFQ_TAIL);
++	sch->qstats.backlog += skb->len;
++	if (++sch->q.qlen < q->limit-1) {
++		sch->bstats.bytes += skb->len;
++		sch->bstats.packets++;
++		return 0;
++	}
++
++	sch->qstats.drops++;
++	esfq_drop(sch);
++	return NET_XMIT_CN;
++}
++
++static struct sk_buff *esfq_peek(struct Qdisc* sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_index a;
++
++	/* No active slots */
++	if (q->tail == q->depth)
++		return NULL;
++
++	a = q->next[q->tail];
++	return skb_peek(&q->qs[a]);
++}
++
++static struct sk_buff *esfq_q_dequeue(struct esfq_sched_data *q)
++{
++	struct sk_buff *skb;
++	unsigned depth = q->depth;
++	esfq_index a, old_a;
++
++	/* No active slots */
++	if (q->tail == depth)
++		return NULL;
++
++	a = old_a = q->next[q->tail];
++
++	/* Grab packet */
++	skb = __skb_dequeue(&q->qs[a]);
++	esfq_dec(q, a);
++
++	/* Is the slot empty? */
++	if (q->qs[a].qlen == 0) {
++		q->ht[q->hash[a]] = depth;
++		a = q->next[a];
++		if (a == old_a) {
++			q->tail = depth;
++			return skb;
++		}
++		q->next[q->tail] = a;
++		q->allot[a] += q->quantum;
++	} else if ((q->allot[a] -= skb->len) <= 0) {
++		q->tail = a;
++		a = q->next[a];
++		q->allot[a] += q->quantum;
++	}
++
++	return skb;
++}
++
++static struct sk_buff *esfq_dequeue(struct Qdisc* sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	struct sk_buff *skb;
++
++	skb = esfq_q_dequeue(q);
++	if (skb == NULL)
++		return NULL;
++	sch->q.qlen--;
++	sch->qstats.backlog -= skb->len;
++	return skb;
++}
++
++static void esfq_q_destroy(struct esfq_sched_data *q)
++{
++	del_timer(&q->perturb_timer);
++	if(q->ht)
++		kfree(q->ht);
++	if(q->dep)
++		kfree(q->dep);
++	if(q->next)
++		kfree(q->next);
++	if(q->allot)
++		kfree(q->allot);
++	if(q->hash)
++		kfree(q->hash);
++	if(q->qs)
++		kfree(q->qs);
++}
++
++static void esfq_destroy(struct Qdisc *sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_q_destroy(q);
++}
++
++
++static void esfq_reset(struct Qdisc* sch)
++{
++	struct sk_buff *skb;
++
++	while ((skb = esfq_dequeue(sch)) != NULL)
++		kfree_skb(skb);
++}
++
++static void esfq_perturbation(unsigned long arg)
++{
++	struct Qdisc *sch = (struct Qdisc*)arg;
++	struct esfq_sched_data *q = qdisc_priv(sch);
++
++	q->perturbation = net_random()&0x1F;
++
++	if (q->perturb_period) {
++		q->perturb_timer.expires = jiffies + q->perturb_period;
++		add_timer(&q->perturb_timer);
++	}
++}
++
++static unsigned int esfq_check_hash(unsigned int kind)
++{
++	switch (kind) {
++	case TCA_SFQ_HASH_CTORIGDST:
++	case TCA_SFQ_HASH_CTORIGSRC:
++	case TCA_SFQ_HASH_CTREPLDST:
++	case TCA_SFQ_HASH_CTREPLSRC:
++	case TCA_SFQ_HASH_CTNATCHG:
++#ifndef CONFIG_NET_SCH_ESFQ_NFCT
++	{
++		if (net_ratelimit())
++			printk(KERN_WARNING "ESFQ: Conntrack hash types disabled in kernel config. Falling back to classic.\n");
++		return TCA_SFQ_HASH_CLASSIC;
++	}
++#endif
++	case TCA_SFQ_HASH_CLASSIC:
++	case TCA_SFQ_HASH_DST:
++	case TCA_SFQ_HASH_SRC:
++	case TCA_SFQ_HASH_FWMARK:
++		return kind;
++	default:
++	{
++		if (net_ratelimit())
++			printk(KERN_WARNING "ESFQ: Unknown hash type. Falling back to classic.\n");
++		return TCA_SFQ_HASH_CLASSIC;
++	}
++	}
++}
++
++static int esfq_q_init(struct esfq_sched_data *q, struct nlattr *opt)
++{
++	struct tc_esfq_qopt *ctl = nla_data(opt);
++	esfq_index p = ~0U/2;
++	int i;
++
++	if (opt && opt->nla_len < nla_attr_size(sizeof(*ctl)))
++		return -EINVAL;
++
++	q->perturbation = 0;
++	q->hash_kind = TCA_SFQ_HASH_CLASSIC;
++	q->max_depth = 0;
++	if (opt == NULL) {
++		q->perturb_period = 0;
++		q->hash_divisor = 1024;
++		q->tail = q->limit = q->depth = 128;
++
++	} else {
++		struct tc_esfq_qopt *ctl = nla_data(opt);
++		if (ctl->quantum)
++			q->quantum = ctl->quantum;
++		q->perturb_period = ctl->perturb_period*HZ;
++		q->hash_divisor = ctl->divisor ? : 1024;
++		q->tail = q->limit = q->depth = ctl->flows ? : 128;
++
++		if ( q->depth > p - 1 )
++			return -EINVAL;
++
++		if (ctl->limit)
++			q->limit = min_t(u32, ctl->limit, q->depth);
++
++		if (ctl->hash_kind) {
++			q->hash_kind = esfq_check_hash(ctl->hash_kind);
++		}
++	}
++
++	q->ht = kmalloc(q->hash_divisor*sizeof(esfq_index), GFP_KERNEL);
++	if (!q->ht)
++		goto err_case;
++	q->dep = kmalloc((1+q->depth*2)*sizeof(struct esfq_head), GFP_KERNEL);
++	if (!q->dep)
++		goto err_case;
++	q->next = kmalloc(q->depth*sizeof(esfq_index), GFP_KERNEL);
++	if (!q->next)
++		goto err_case;
++	q->allot = kmalloc(q->depth*sizeof(short), GFP_KERNEL);
++	if (!q->allot)
++		goto err_case;
++	q->hash = kmalloc(q->depth*sizeof(unsigned short), GFP_KERNEL);
++	if (!q->hash)
++		goto err_case;
++	q->qs = kmalloc(q->depth*sizeof(struct sk_buff_head), GFP_KERNEL);
++	if (!q->qs)
++		goto err_case;
++
++	for (i=0; i< q->hash_divisor; i++)
++		q->ht[i] = q->depth;
++	for (i=0; i<q->depth; i++) {
++		skb_queue_head_init(&q->qs[i]);
++		q->dep[i+q->depth].next = i+q->depth;
++		q->dep[i+q->depth].prev = i+q->depth;
++	}
++
++	for (i=0; i<q->depth; i++)
++		esfq_link(q, i);
++	return 0;
++err_case:
++	esfq_q_destroy(q);
++	return -ENOBUFS;
++}
++
++static int esfq_init(struct Qdisc *sch, struct nlattr *opt)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	int err;
++
++	q->quantum = psched_mtu(qdisc_dev(sch)); /* default */
++	if ((err = esfq_q_init(q, opt)))
++		return err;
++
++	init_timer(&q->perturb_timer);
++	q->perturb_timer.data = (unsigned long)sch;
++	q->perturb_timer.function = esfq_perturbation;
++	if (q->perturb_period) {
++		q->perturb_timer.expires = jiffies + q->perturb_period;
++		add_timer(&q->perturb_timer);
++	}
++
++	return 0;
++}
++
++static int esfq_change(struct Qdisc *sch, struct nlattr *opt)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	struct esfq_sched_data new;
++	struct sk_buff *skb;
++	int err;
++
++	/* set up new queue */
++	memset(&new, 0, sizeof(struct esfq_sched_data));
++	new.quantum = psched_mtu(qdisc_dev(sch)); /* default */
++	if ((err = esfq_q_init(&new, opt)))
++		return err;
++
++	/* copy all packets from the old queue to the new queue */
++	sch_tree_lock(sch);
++	while ((skb = esfq_q_dequeue(q)) != NULL)
++		esfq_q_enqueue(skb, &new, ESFQ_TAIL);
++
++	/* clean up the old queue */
++	esfq_q_destroy(q);
++
++	/* copy elements of the new queue into the old queue */
++	q->perturb_period = new.perturb_period;
++	q->quantum        = new.quantum;
++	q->limit          = new.limit;
++	q->depth          = new.depth;
++	q->hash_divisor   = new.hash_divisor;
++	q->hash_kind      = new.hash_kind;
++	q->tail           = new.tail;
++	q->max_depth      = new.max_depth;
++	q->ht    = new.ht;
++	q->dep   = new.dep;
++	q->next  = new.next;
++	q->allot = new.allot;
++	q->hash  = new.hash;
++	q->qs    = new.qs;
++
++	/* finish up */
++	if (q->perturb_period) {
++		q->perturb_timer.expires = jiffies + q->perturb_period;
++		add_timer(&q->perturb_timer);
++	} else {
++		q->perturbation = 0;
++	}
++	sch_tree_unlock(sch);
++	return 0;
++}
++
++static int esfq_dump(struct Qdisc *sch, struct sk_buff *skb)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	unsigned char *b = skb_tail_pointer(skb);
++	struct tc_esfq_qopt opt;
++
++	opt.quantum = q->quantum;
++	opt.perturb_period = q->perturb_period/HZ;
++
++	opt.limit = q->limit;
++	opt.divisor = q->hash_divisor;
++	opt.flows = q->depth;
++	opt.hash_kind = q->hash_kind;
++
++	NLA_PUT(skb, TCA_OPTIONS, sizeof(opt), &opt);
++
++	return skb->len;
++
++nla_put_failure:
++	nlmsg_trim(skb, b);
++	return -1;
++}
++
++static struct Qdisc_ops esfq_qdisc_ops =
++{
++	.next		=	NULL,
++	.cl_ops		=	NULL,
++	.id		=	"esfq",
++	.priv_size	=	sizeof(struct esfq_sched_data),
++	.enqueue	=	esfq_enqueue,
++	.dequeue	=	esfq_dequeue,
++	.peek		=	esfq_peek,
++	.drop		=	esfq_drop,
++	.init		=	esfq_init,
++	.reset		=	esfq_reset,
++	.destroy	=	esfq_destroy,
++	.change		=	esfq_change,
++	.dump		=	esfq_dump,
++	.owner		=	THIS_MODULE,
++};
++
++static int __init esfq_module_init(void)
++{
++	return register_qdisc(&esfq_qdisc_ops);
++}
++static void __exit esfq_module_exit(void)
++{
++	unregister_qdisc(&esfq_qdisc_ops);
++}
++module_init(esfq_module_init)
++module_exit(esfq_module_exit)
++MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/patches-2.6.31/201-jhash3.patch b/target/linux/generic/patches-2.6.31/201-jhash3.patch
new file mode 100644
index 0000000000..0218fa19c5
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/201-jhash3.patch
@@ -0,0 +1,227 @@
+--- a/include/linux/jhash.h
++++ b/include/linux/jhash.h
+@@ -3,80 +3,95 @@
+ 
+ /* jhash.h: Jenkins hash support.
+  *
+- * Copyright (C) 1996 Bob Jenkins (bob_jenkins@burtleburtle.net)
++ * Copyright (C) 2006. Bob Jenkins (bob_jenkins@burtleburtle.net)
+  *
+  * http://burtleburtle.net/bob/hash/
+  *
+  * These are the credits from Bob's sources:
+  *
+- * lookup2.c, by Bob Jenkins, December 1996, Public Domain.
+- * hash(), hash2(), hash3, and mix() are externally useful functions.
+- * Routines to test the hash are included if SELF_TEST is defined.
+- * You can use this free for any purpose.  It has no warranty.
++ * lookup3.c, by Bob Jenkins, May 2006, Public Domain.
+  *
+- * Copyright (C) 2003 David S. Miller (davem@redhat.com)
++ * These are functions for producing 32-bit hashes for hash table lookup.
++ * hashword(), hashlittle(), hashlittle2(), hashbig(), mix(), and final() 
++ * are externally useful functions.  Routines to test the hash are included 
++ * if SELF_TEST is defined.  You can use this free for any purpose.  It's in
++ * the public domain.  It has no warranty.
++ *
++ * Copyright (C) 2009 Jozsef Kadlecsik (kadlec@blackhole.kfki.hu)
+  *
+  * I've modified Bob's hash to be useful in the Linux kernel, and
+- * any bugs present are surely my fault.  -DaveM
++ * any bugs present are my fault.  Jozsef
+  */
+ 
+-/* NOTE: Arguments are modified. */
+-#define __jhash_mix(a, b, c) \
++#define __rot(x,k) (((x)<<(k)) | ((x)>>(32-(k))))
++
++/* __jhash_mix - mix 3 32-bit values reversibly. */
++#define __jhash_mix(a,b,c) \
++{ \
++  a -= c;  a ^= __rot(c, 4);  c += b; \
++  b -= a;  b ^= __rot(a, 6);  a += c; \
++  c -= b;  c ^= __rot(b, 8);  b += a; \
++  a -= c;  a ^= __rot(c,16);  c += b; \
++  b -= a;  b ^= __rot(a,19);  a += c; \
++  c -= b;  c ^= __rot(b, 4);  b += a; \
++}
++
++/* __jhash_final - final mixing of 3 32-bit values (a,b,c) into c */
++#define __jhash_final(a,b,c) \
+ { \
+-  a -= b; a -= c; a ^= (c>>13); \
+-  b -= c; b -= a; b ^= (a<<8); \
+-  c -= a; c -= b; c ^= (b>>13); \
+-  a -= b; a -= c; a ^= (c>>12);  \
+-  b -= c; b -= a; b ^= (a<<16); \
+-  c -= a; c -= b; c ^= (b>>5); \
+-  a -= b; a -= c; a ^= (c>>3);  \
+-  b -= c; b -= a; b ^= (a<<10); \
+-  c -= a; c -= b; c ^= (b>>15); \
++  c ^= b; c -= __rot(b,14); \
++  a ^= c; a -= __rot(c,11); \
++  b ^= a; b -= __rot(a,25); \
++  c ^= b; c -= __rot(b,16); \
++  a ^= c; a -= __rot(c,4);  \
++  b ^= a; b -= __rot(a,14); \
++  c ^= b; c -= __rot(b,24); \
+ }
+ 
+-/* The golden ration: an arbitrary value */
+-#define JHASH_GOLDEN_RATIO	0x9e3779b9
++/* An arbitrary initial parameter */
++#define JHASH_GOLDEN_RATIO	0xdeadbeef
+ 
+ /* The most generic version, hashes an arbitrary sequence
+  * of bytes.  No alignment or length assumptions are made about
+- * the input key.
++ * the input key. The result depends on endianness.
+  */
+ static inline u32 jhash(const void *key, u32 length, u32 initval)
+ {
+-	u32 a, b, c, len;
++	u32 a,b,c;
+ 	const u8 *k = key;
+ 
+-	len = length;
+-	a = b = JHASH_GOLDEN_RATIO;
+-	c = initval;
+-
+-	while (len >= 12) {
+-		a += (k[0] +((u32)k[1]<<8) +((u32)k[2]<<16) +((u32)k[3]<<24));
+-		b += (k[4] +((u32)k[5]<<8) +((u32)k[6]<<16) +((u32)k[7]<<24));
+-		c += (k[8] +((u32)k[9]<<8) +((u32)k[10]<<16)+((u32)k[11]<<24));
+-
+-		__jhash_mix(a,b,c);
++	/* Set up the internal state */
++	a = b = c = JHASH_GOLDEN_RATIO + length + initval;
+ 
++	/* all but the last block: affect some 32 bits of (a,b,c) */
++	while (length > 12) {
++    		a += (k[0] + ((u32)k[1]<<8) + ((u32)k[2]<<16) + ((u32)k[3]<<24));
++		b += (k[4] + ((u32)k[5]<<8) + ((u32)k[6]<<16) + ((u32)k[7]<<24));
++		c += (k[8] + ((u32)k[9]<<8) + ((u32)k[10]<<16) + ((u32)k[11]<<24));
++		__jhash_mix(a, b, c);
++		length -= 12;
+ 		k += 12;
+-		len -= 12;
+ 	}
+ 
+-	c += length;
+-	switch (len) {
+-	case 11: c += ((u32)k[10]<<24);
+-	case 10: c += ((u32)k[9]<<16);
+-	case 9 : c += ((u32)k[8]<<8);
+-	case 8 : b += ((u32)k[7]<<24);
+-	case 7 : b += ((u32)k[6]<<16);
+-	case 6 : b += ((u32)k[5]<<8);
++	/* last block: affect all 32 bits of (c) */
++	/* all the case statements fall through */
++	switch (length) {
++	case 12: c += (u32)k[11]<<24;
++	case 11: c += (u32)k[10]<<16;
++	case 10: c += (u32)k[9]<<8;
++	case 9 : c += k[8];
++	case 8 : b += (u32)k[7]<<24;
++	case 7 : b += (u32)k[6]<<16;
++	case 6 : b += (u32)k[5]<<8;
+ 	case 5 : b += k[4];
+-	case 4 : a += ((u32)k[3]<<24);
+-	case 3 : a += ((u32)k[2]<<16);
+-	case 2 : a += ((u32)k[1]<<8);
++	case 4 : a += (u32)k[3]<<24;
++	case 3 : a += (u32)k[2]<<16;
++	case 2 : a += (u32)k[1]<<8;
+ 	case 1 : a += k[0];
+-	};
+-
+-	__jhash_mix(a,b,c);
++		__jhash_final(a, b, c);
++	case 0 :
++		break;
++	}
+ 
+ 	return c;
+ }
+@@ -86,58 +101,57 @@ static inline u32 jhash(const void *key,
+  */
+ static inline u32 jhash2(const u32 *k, u32 length, u32 initval)
+ {
+-	u32 a, b, c, len;
++	u32 a, b, c;
+ 
+-	a = b = JHASH_GOLDEN_RATIO;
+-	c = initval;
+-	len = length;
++	/* Set up the internal state */
++	a = b = c = JHASH_GOLDEN_RATIO + (length<<2) + initval;
+ 
+-	while (len >= 3) {
++	/* handle most of the key */
++	while (length > 3) {
+ 		a += k[0];
+ 		b += k[1];
+ 		c += k[2];
+ 		__jhash_mix(a, b, c);
+-		k += 3; len -= 3;
++		length -= 3;
++		k += 3;
+ 	}
+ 
+-	c += length * 4;
+-
+-	switch (len) {
+-	case 2 : b += k[1];
+-	case 1 : a += k[0];
+-	};
+-
+-	__jhash_mix(a,b,c);
++	/* handle the last 3 u32's */
++	/* all the case statements fall through */ 
++	switch (length) {
++	case 3: c += k[2];
++	case 2: b += k[1];
++	case 1: a += k[0];
++		__jhash_final(a, b, c);
++	case 0:     /* case 0: nothing left to add */
++		break;
++	}
+ 
+ 	return c;
+ }
+ 
+-
+ /* A special ultra-optimized versions that knows they are hashing exactly
+  * 3, 2 or 1 word(s).
+- *
+- * NOTE: In partilar the "c += length; __jhash_mix(a,b,c);" normally
+- *       done at the end is not done here.
+  */
+ static inline u32 jhash_3words(u32 a, u32 b, u32 c, u32 initval)
+ {
+-	a += JHASH_GOLDEN_RATIO;
+-	b += JHASH_GOLDEN_RATIO;
+-	c += initval;
++	a += JHASH_GOLDEN_RATIO + initval;
++	b += JHASH_GOLDEN_RATIO + initval;
++	c += JHASH_GOLDEN_RATIO + initval;
+ 
+-	__jhash_mix(a, b, c);
++	__jhash_final(a, b, c);
+ 
+ 	return c;
+ }
+ 
+ static inline u32 jhash_2words(u32 a, u32 b, u32 initval)
+ {
+-	return jhash_3words(a, b, 0, initval);
++	return jhash_3words(0, a, b, initval);
+ }
+ 
+ static inline u32 jhash_1word(u32 a, u32 initval)
+ {
+-	return jhash_3words(a, 0, 0, initval);
++	return jhash_3words(0, 0, a, initval);
+ }
+ 
+ #endif /* _LINUX_JHASH_H */
diff --git a/target/linux/generic/patches-2.6.31/202-mips_mem_functions_performance.patch b/target/linux/generic/patches-2.6.31/202-mips_mem_functions_performance.patch
new file mode 100644
index 0000000000..e4324717b4
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/202-mips_mem_functions_performance.patch
@@ -0,0 +1,83 @@
+--- a/arch/mips/include/asm/string.h
++++ b/arch/mips/include/asm/string.h
+@@ -133,11 +133,44 @@ strncmp(__const__ char *__cs, __const__
+ 
+ #define __HAVE_ARCH_MEMSET
+ extern void *memset(void *__s, int __c, size_t __count);
++#define memset(__s, __c, len)					\
++({								\
++	size_t __len = (len);					\
++	void *__ret;						\
++	if (__builtin_constant_p(len) && __len >= 64)		\
++		__ret = memset((__s), (__c), __len);		\
++	else							\
++		__ret = __builtin_memset((__s), (__c), __len);	\
++	__ret;							\
++})
+ 
+ #define __HAVE_ARCH_MEMCPY
+ extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
++#define memcpy(dst, src, len)					\
++({								\
++	size_t __len = (len);					\
++	void *__ret;						\
++	if (__builtin_constant_p(len) && __len >= 64)		\
++		__ret = memcpy((dst), (src), __len);		\
++	else							\
++		__ret = __builtin_memcpy((dst), (src), __len);	\
++	__ret;							\
++})
+ 
+ #define __HAVE_ARCH_MEMMOVE
+ extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
++#define memmove(dst, src, len)					\
++({								\
++	size_t __len = (len);					\
++	void *__ret;						\
++	if (__builtin_constant_p(len) && __len >= 64)		\
++		__ret = memmove((dst), (src), __len);		\
++	else							\
++		__ret = __builtin_memmove((dst), (src), __len);	\
++	__ret;							\
++})
++
++#define __HAVE_ARCH_MEMCMP
++#define memcmp(src1, src2, len) __builtin_memcmp((src1), (src2), (len))
+ 
+ #endif /* _ASM_STRING_H */
+--- a/arch/mips/lib/Makefile
++++ b/arch/mips/lib/Makefile
+@@ -3,7 +3,7 @@
+ #
+ 
+ lib-y	+= csum_partial.o delay.o memcpy.o memcpy-inatomic.o memset.o \
+-	   strlen_user.o strncpy_user.o strnlen_user.o uncached.o
++	   strlen_user.o strncpy_user.o strnlen_user.o uncached.o memcmp.o
+ 
+ obj-y			+= iomap.o
+ obj-$(CONFIG_PCI)	+= iomap-pci.o
+--- /dev/null
++++ b/arch/mips/lib/memcmp.c
+@@ -0,0 +1,22 @@
++/*
++ *  copied from linux/lib/string.c
++ *
++ *  Copyright (C) 1991, 1992  Linus Torvalds
++ */
++
++#include <linux/module.h>
++#include <linux/string.h>
++
++#undef memcmp
++int memcmp(const void *cs, const void *ct, size_t count)
++{
++	const unsigned char *su1, *su2;
++	int res = 0;
++
++	for (su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--)
++		if ((res = *su1 - *su2) != 0)
++			break;
++	return res;
++}
++EXPORT_SYMBOL(memcmp);
++
diff --git a/target/linux/generic/patches-2.6.31/203-slab_maxsize.patch b/target/linux/generic/patches-2.6.31/203-slab_maxsize.patch
new file mode 100644
index 0000000000..5bbf9f5f0e
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/203-slab_maxsize.patch
@@ -0,0 +1,13 @@
+--- a/include/linux/slab.h
++++ b/include/linux/slab.h
+@@ -124,8 +124,8 @@ int kmem_ptr_validate(struct kmem_cache
+  * to do various tricks to work around compiler limitations in order to
+  * ensure proper constant folding.
+  */
+-#define KMALLOC_SHIFT_HIGH	((MAX_ORDER + PAGE_SHIFT - 1) <= 25 ? \
+-				(MAX_ORDER + PAGE_SHIFT - 1) : 25)
++#define KMALLOC_SHIFT_HIGH	((MAX_ORDER + PAGE_SHIFT - 1) <= 17 ? \
++				(MAX_ORDER + PAGE_SHIFT - 1) : 17)
+ 
+ #define KMALLOC_MAX_SIZE	(1UL << KMALLOC_SHIFT_HIGH)
+ #define KMALLOC_MAX_ORDER	(KMALLOC_SHIFT_HIGH - PAGE_SHIFT)
diff --git a/target/linux/generic/patches-2.6.31/204-jffs2_eofdetect.patch b/target/linux/generic/patches-2.6.31/204-jffs2_eofdetect.patch
new file mode 100644
index 0000000000..16d3e1f8e8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/204-jffs2_eofdetect.patch
@@ -0,0 +1,132 @@
+--- a/fs/jffs2/build.c
++++ b/fs/jffs2/build.c
+@@ -111,6 +111,17 @@ static int jffs2_build_filesystem(struct
+ 	dbg_fsbuild("scanned flash completely\n");
+ 	jffs2_dbg_dump_block_lists_nolock(c);
+ 
++	if (c->flags & (1 << 7)) {
++		printk("%s(): unlocking the mtd device... ", __func__);
++		if (c->mtd->unlock)
++			c->mtd->unlock(c->mtd, 0, c->mtd->size);
++		printk("done.\n");
++
++		printk("%s(): erasing all blocks after the end marker... ", __func__);
++		jffs2_erase_pending_blocks(c, -1);
++		printk("done.\n");
++	}
++
+ 	dbg_fsbuild("pass 1 starting\n");
+ 	c->flags |= JFFS2_SB_FLAG_BUILDING;
+ 	/* Now scan the directory tree, increasing nlink according to every dirent found. */
+--- a/fs/jffs2/scan.c
++++ b/fs/jffs2/scan.c
+@@ -72,7 +72,7 @@ static int file_dirty(struct jffs2_sb_in
+ 		return ret;
+ 	if ((ret = jffs2_scan_dirty_space(c, jeb, jeb->free_size)))
+ 		return ret;
+-	/* Turned wasted size into dirty, since we apparently 
++	/* Turned wasted size into dirty, since we apparently
+ 	   think it's recoverable now. */
+ 	jeb->dirty_size += jeb->wasted_size;
+ 	c->dirty_size += jeb->wasted_size;
+@@ -144,8 +144,11 @@ int jffs2_scan_medium(struct jffs2_sb_in
+ 		/* reset summary info for next eraseblock scan */
+ 		jffs2_sum_reset_collected(s);
+ 
+-		ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
+-						buf_size, s);
++		if (c->flags & (1 << 7))
++			ret = BLK_STATE_ALLFF;
++		else
++			ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
++							buf_size, s);
+ 
+ 		if (ret < 0)
+ 			goto out;
+@@ -400,7 +403,7 @@ static int jffs2_scan_xref_node(struct j
+ 	if (!ref)
+ 		return -ENOMEM;
+ 
+-	/* BEFORE jffs2_build_xattr_subsystem() called, 
++	/* BEFORE jffs2_build_xattr_subsystem() called,
+ 	 * and AFTER xattr_ref is marked as a dead xref,
+ 	 * ref->xid is used to store 32bit xid, xd is not used
+ 	 * ref->ino is used to store 32bit inode-number, ic is not used
+@@ -473,7 +476,7 @@ static int jffs2_scan_eraseblock (struct
+ 		struct jffs2_sum_marker *sm;
+ 		void *sumptr = NULL;
+ 		uint32_t sumlen;
+-	      
++
+ 		if (!buf_size) {
+ 			/* XIP case. Just look, point at the summary if it's there */
+ 			sm = (void *)buf + c->sector_size - sizeof(*sm);
+@@ -489,9 +492,9 @@ static int jffs2_scan_eraseblock (struct
+ 				buf_len = sizeof(*sm);
+ 
+ 			/* Read as much as we want into the _end_ of the preallocated buffer */
+-			err = jffs2_fill_scan_buf(c, buf + buf_size - buf_len, 
++			err = jffs2_fill_scan_buf(c, buf + buf_size - buf_len,
+ 						  jeb->offset + c->sector_size - buf_len,
+-						  buf_len);				
++						  buf_len);
+ 			if (err)
+ 				return err;
+ 
+@@ -510,9 +513,9 @@ static int jffs2_scan_eraseblock (struct
+ 				}
+ 				if (buf_len < sumlen) {
+ 					/* Need to read more so that the entire summary node is present */
+-					err = jffs2_fill_scan_buf(c, sumptr, 
++					err = jffs2_fill_scan_buf(c, sumptr,
+ 								  jeb->offset + c->sector_size - sumlen,
+-								  sumlen - buf_len);				
++								  sumlen - buf_len);
+ 					if (err)
+ 						return err;
+ 				}
+@@ -525,7 +528,7 @@ static int jffs2_scan_eraseblock (struct
+ 
+ 			if (buf_size && sumlen > buf_size)
+ 				kfree(sumptr);
+-			/* If it returns with a real error, bail. 
++			/* If it returns with a real error, bail.
+ 			   If it returns positive, that's a block classification
+ 			   (i.e. BLK_STATE_xxx) so return that too.
+ 			   If it returns zero, fall through to full scan. */
+@@ -546,6 +549,17 @@ static int jffs2_scan_eraseblock (struct
+ 			return err;
+ 	}
+ 
++	if ((buf[0] == 0xde) &&
++		(buf[1] == 0xad) &&
++		(buf[2] == 0xc0) &&
++		(buf[3] == 0xde)) {
++		/* end of filesystem. erase everything after this point */
++		printk("%s(): End of filesystem marker found at 0x%x\n", __func__, jeb->offset);
++		c->flags |= (1 << 7);
++
++		return BLK_STATE_ALLFF;
++	}
++
+ 	/* We temporarily use 'ofs' as a pointer into the buffer/jeb */
+ 	ofs = 0;
+ 
+@@ -671,7 +685,7 @@ scan_more:
+ 				scan_end = buf_len;
+ 				goto more_empty;
+ 			}
+-			
++
+ 			/* See how much more there is to read in this eraseblock... */
+ 			buf_len = min_t(uint32_t, buf_size, jeb->offset + c->sector_size - ofs);
+ 			if (!buf_len) {
+@@ -907,7 +921,7 @@ scan_more:
+ 
+ 	D1(printk(KERN_DEBUG "Block at 0x%08x: free 0x%08x, dirty 0x%08x, unchecked 0x%08x, used 0x%08x, wasted 0x%08x\n",
+ 		  jeb->offset,jeb->free_size, jeb->dirty_size, jeb->unchecked_size, jeb->used_size, jeb->wasted_size));
+-	
++
+ 	/* mark_node_obsolete can add to wasted !! */
+ 	if (jeb->wasted_size) {
+ 		jeb->dirty_size += jeb->wasted_size;
diff --git a/target/linux/generic/patches-2.6.31/205-skb_padding.patch b/target/linux/generic/patches-2.6.31/205-skb_padding.patch
new file mode 100644
index 0000000000..80c7e704e8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/205-skb_padding.patch
@@ -0,0 +1,56 @@
+--- a/include/linux/skbuff.h
++++ b/include/linux/skbuff.h
+@@ -1387,11 +1387,18 @@ static inline int skb_network_offset(con
+  *
+  * Various parts of the networking layer expect at least 32 bytes of
+  * headroom, you should not reduce this.
++ *
++ * This has been changed to 64 to acommodate for routing between ethernet
++ * and wireless, but only for new allocations
+  */
+ #ifndef NET_SKB_PAD
+ #define NET_SKB_PAD	32
+ #endif
+ 
++#ifndef NET_SKB_PAD_ALLOC
++#define NET_SKB_PAD_ALLOC	64
++#endif
++
+ extern int ___pskb_trim(struct sk_buff *skb, unsigned int len);
+ 
+ static inline void __skb_trim(struct sk_buff *skb, unsigned int len)
+@@ -1481,9 +1488,9 @@ static inline void __skb_queue_purge(str
+ static inline struct sk_buff *__dev_alloc_skb(unsigned int length,
+ 					      gfp_t gfp_mask)
+ {
+-	struct sk_buff *skb = alloc_skb(length + NET_SKB_PAD, gfp_mask);
++	struct sk_buff *skb = alloc_skb(length + NET_SKB_PAD_ALLOC, gfp_mask);
+ 	if (likely(skb))
+-		skb_reserve(skb, NET_SKB_PAD);
++		skb_reserve(skb, NET_SKB_PAD_ALLOC);
+ 	return skb;
+ }
+ 
+@@ -1556,7 +1563,7 @@ static inline int __skb_cow(struct sk_bu
+ 		delta = headroom - skb_headroom(skb);
+ 
+ 	if (delta || cloned)
+-		return pskb_expand_head(skb, ALIGN(delta, NET_SKB_PAD), 0,
++		return pskb_expand_head(skb, ALIGN(delta, NET_SKB_PAD_ALLOC), 0,
+ 					GFP_ATOMIC);
+ 	return 0;
+ }
+--- a/net/core/skbuff.c
++++ b/net/core/skbuff.c
+@@ -336,9 +336,9 @@ struct sk_buff *__netdev_alloc_skb(struc
+ 	int node = dev->dev.parent ? dev_to_node(dev->dev.parent) : -1;
+ 	struct sk_buff *skb;
+ 
+-	skb = __alloc_skb(length + NET_SKB_PAD, gfp_mask, 0, node);
++	skb = __alloc_skb(length + NET_SKB_PAD_ALLOC, gfp_mask, 0, node);
+ 	if (likely(skb)) {
+-		skb_reserve(skb, NET_SKB_PAD);
++		skb_reserve(skb, NET_SKB_PAD_ALLOC);
+ 		skb->dev = dev;
+ 	}
+ 	return skb;
diff --git a/target/linux/generic/patches-2.6.31/207-powerpc_asm_segment_h.patch b/target/linux/generic/patches-2.6.31/207-powerpc_asm_segment_h.patch
new file mode 100644
index 0000000000..1272e82c75
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/207-powerpc_asm_segment_h.patch
@@ -0,0 +1,9 @@
+--- /dev/null
++++ b/include/asm-powerpc/segment.h
+@@ -0,0 +1,6 @@
++#ifndef _ASM_SEGMENT_H
++#define _ASM_SEGMENT_H
++
++/* Only here because we have some old header files that expect it.. */
++
++#endif /* _ASM_SEGMENT_H */
diff --git a/target/linux/generic/patches-2.6.31/209-mini_fo.patch b/target/linux/generic/patches-2.6.31/209-mini_fo.patch
new file mode 100644
index 0000000000..e3ce162ad7
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/209-mini_fo.patch
@@ -0,0 +1,7780 @@
+--- a/fs/Kconfig
++++ b/fs/Kconfig
+@@ -178,6 +178,7 @@ source "fs/ubifs/Kconfig"
+ source "fs/cramfs/Kconfig"
+ source "fs/squashfs/Kconfig"
+ source "fs/freevxfs/Kconfig"
++source "fs/mini_fo/Kconfig"
+ source "fs/minix/Kconfig"
+ source "fs/omfs/Kconfig"
+ source "fs/hpfs/Kconfig"
+--- a/fs/Makefile
++++ b/fs/Makefile
+@@ -77,6 +77,7 @@ obj-$(CONFIG_SQUASHFS)		+= squashfs/
+ obj-y				+= ramfs/
+ obj-$(CONFIG_HUGETLBFS)		+= hugetlbfs/
+ obj-$(CONFIG_CODA_FS)		+= coda/
++obj-$(CONFIG_MINI_FO)		+= mini_fo/
+ obj-$(CONFIG_MINIX_FS)		+= minix/
+ obj-$(CONFIG_FAT_FS)		+= fat/
+ obj-$(CONFIG_BFS_FS)		+= bfs/
+--- /dev/null
++++ b/fs/mini_fo/aux.c
+@@ -0,0 +1,577 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++
++/* check if file exists in storage  */
++int exists_in_storage(dentry_t *dentry)
++{
++	check_mini_fo_dentry(dentry);
++	if(dtost(dentry) == MODIFIED || dtost(dentry) == CREATED || dtost(dentry) == DEL_REWRITTEN)
++		return 1;
++	return 0;
++}
++
++/* check if dentry is in an existing state */
++int is_mini_fo_existant(dentry_t *dentry)
++{
++	check_mini_fo_dentry(dentry);
++
++	if(dtost(dentry) == DELETED || dtost(dentry) == NON_EXISTANT)
++		return 0;
++	else
++		return 1;
++}
++
++/*
++ * This function will create a negative storage dentry for
++ * dentry, what is required for many create like options.
++ * It will create the storage structure if necessary.
++ */
++int get_neg_sto_dentry(dentry_t *dentry)
++{
++	int err = 0;
++	unsigned int len;
++	const unsigned char *name;
++
++	if(!dentry ||
++	   !dtopd(dentry) ||
++	   !(dtost(dentry) == UNMODIFIED ||
++	     dtost(dentry) == NON_EXISTANT ||
++	     dtost(dentry) == DELETED)) {
++		printk(KERN_CRIT "mini_fo: get_neg_sto_dentry: invalid dentry passed.\n");
++		err = -1;
++		goto out;
++	}
++	/* Have we got a neg. dentry already? */
++	if(dtohd2(dentry)) {
++		err = 0;
++		goto out;
++	}
++	if(dtost(dentry->d_parent) == UNMODIFIED) {
++		/* build sto struct */
++		err = build_sto_structure(dentry->d_parent->d_parent, dentry->d_parent);
++		if(err ||
++		   dtost(dentry->d_parent) != MODIFIED) {
++			printk(KERN_CRIT "mini_fo: get_neg_sto_dentry: ERROR building sto structure.\n");
++			err = -1;
++			goto out;
++		}
++	}
++
++	len = dentry->d_name.len;
++	name = dentry->d_name.name;
++
++	dtohd2(dentry) =
++		lookup_one_len(name, dtohd2(dentry->d_parent), len);
++
++ out:
++	return err;
++}
++
++int check_mini_fo_dentry(dentry_t *dentry)
++{
++ 	ASSERT(dentry != NULL);
++	ASSERT(dtopd(dentry) != NULL);
++	ASSERT((dtohd(dentry) != NULL) || (dtohd2(dentry) != NULL));
++
++/* 	if(dtost(dentry) == MODIFIED) { */
++/* 		ASSERT(dentry->d_inode != NULL); */
++/* 		ASSERT(dtohd(dentry) != NULL); */
++/* 		ASSERT(dtohd(dentry)->d_inode != NULL); */
++/* 		ASSERT(dtohd2(dentry) != NULL); */
++/* 		ASSERT(dtohd2(dentry)->d_inode != NULL); */
++/* 	} */
++/* 	else if(dtost(dentry) == UNMODIFIED) { */
++/* 		ASSERT(dentry->d_inode != NULL); */
++/* 		ASSERT( */
++/* 	} */
++	return 0;
++}
++
++int check_mini_fo_file(file_t *file)
++{
++	ASSERT(file != NULL);
++	ASSERT(ftopd(file) != NULL);
++	ASSERT(file->f_dentry != NULL);
++
++	/* violent checking, check depending of state and type
++	 *	if(S_ISDIR(file->f_dentry->d_inode->i_mode)) {}
++	 */
++	ASSERT((ftohf(file) != NULL) || (ftohf2(file) != NULL));
++	return 0;
++}
++
++int check_mini_fo_inode(inode_t *inode)
++{
++	ASSERT(inode != NULL);
++	ASSERT(itopd(inode) != NULL);
++	ASSERT((itohi(inode) != NULL) || (itohi2(inode) != NULL));
++	return 0;
++}
++
++/*
++ * will walk a base path as provided by get_mini_fo_bpath and return
++ * the (hopefully ;-) ) positive dentry of the renamed base dir.
++ *
++ * This does some work of path_init.
++ */
++dentry_t *bpath_walk(super_block_t *sb, char *bpath)
++{
++	int err;
++        struct vfsmount *mnt;
++	struct nameidata nd;
++
++	/* be paranoid */
++	if(!bpath || bpath[0] != '/') {
++		printk(KERN_CRIT "mini_fo: bpath_walk: Invalid string.\n");
++		return NULL;
++	}
++	if(!sb || !stopd(sb)) {
++		printk(KERN_CRIT "mini_fo: bpath_walk: Invalid sb.\n");
++		return NULL;
++	}
++
++	/* fix this: how do I reach this lock?
++	 * read_lock(&current->fs->lock); */
++	mnt = mntget(stopd(sb)->hidden_mnt);
++	/* read_unlock(&current->fs->lock); */
++
++	err = vfs_path_lookup(mnt->mnt_root, mnt, bpath+1, 0, &nd);
++
++	/* validate */
++	if (err || !nd.dentry || !nd.dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: bpath_walk: path_walk failed.\n");
++		return NULL;
++	}
++	return nd.dentry;
++}
++
++
++/* returns the full path of the basefile incl. its name */
++int get_mini_fo_bpath(dentry_t *dentry, char **bpath, int *bpath_len)
++{
++	char *buf_walker;
++	int len = 0;
++	dentry_t *sky_walker;
++
++	if(!dentry || !dtohd(dentry)) {
++		printk(KERN_CRIT "mini_fo: get_mini_fo_bpath: invalid dentry passed.\n");
++		return -1;
++	}
++	sky_walker = dtohd(dentry);
++
++	do {
++		len += sky_walker->d_name.len + 1 ; /* 1 for '/' */
++		sky_walker = sky_walker->d_parent;
++	} while(sky_walker != stopd(dentry->d_inode->i_sb)->base_dir_dentry);
++
++	/* 1 to oil the loop */
++	*bpath = (char*)  kmalloc(len + 1, GFP_KERNEL);
++	if(!*bpath) {
++		printk(KERN_CRIT "mini_fo: get_mini_fo_bpath: out of mem.\n");
++		return -1;
++	}
++	buf_walker = *bpath+len; /* put it on last char */
++	*buf_walker = '\n';
++	sky_walker = dtohd(dentry);
++
++	do {
++		buf_walker -= sky_walker->d_name.len;
++		strncpy(buf_walker,
++			sky_walker->d_name.name,
++			sky_walker->d_name.len);
++		*(--buf_walker) = '/';
++		sky_walker = sky_walker->d_parent;
++	} while(sky_walker != stopd(dentry->d_inode->i_sb)->base_dir_dentry);
++
++	/* bpath_len doesn't count newline! */
++	*bpath_len = len;
++ 	return 0;
++}
++
++int mini_fo_cp_cont(dentry_t *tgt_dentry, struct vfsmount *tgt_mnt,
++		    dentry_t *src_dentry, struct vfsmount *src_mnt)
++{
++	void *buf;
++	mm_segment_t old_fs;
++	file_t *tgt_file;
++	file_t *src_file;
++	int bytes, len, tmp, err;
++	err = 0;
++
++	if(!(tgt_dentry->d_inode && src_dentry->d_inode)) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR, neg. dentry passed.\n");
++		err = -EINVAL;
++		goto out;
++	}
++
++	dget(tgt_dentry);
++	dget(src_dentry);
++	mntget(tgt_mnt);
++	mntget(src_mnt);
++
++	/* open file write only */
++	tgt_file = dentry_open(tgt_dentry, tgt_mnt, 0x1);
++	if(!tgt_file || IS_ERR(tgt_file)) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR opening target file.\n");
++		err = PTR_ERR(tgt_file);
++		goto out_err;
++	}
++
++	/* open file read only */
++	src_file = dentry_open(src_dentry, src_mnt, 0x0);
++	if(!src_file || IS_ERR(src_file)) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR opening source file.\n");
++		err = PTR_ERR(src_file);
++
++		/* close target file */
++		fput(tgt_file);
++		goto out_err;
++	}
++
++	/* check if the filesystem(s) support read respective write */
++	if(!src_file->f_op->read || !tgt_file->f_op->write) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR, no fs read or write support.\n");
++		err = -EPERM;
++		goto out_close;
++	}
++
++	/* allocate a page for transfering the data */
++	buf = (void *) __get_free_page(GFP_KERNEL);
++	if(!buf) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR, out of kernel mem.\n");
++		goto out_err;
++	}
++
++	tgt_file->f_pos = 0;
++	src_file->f_pos = 0;
++
++	old_fs = get_fs();
++	set_fs(KERNEL_DS);
++
++	/* Doing this I assume that a read operation will return a full
++	 * buffer while there is still data to read, and a less than
++	 * full buffer when all data has been read.
++	 */
++	bytes = len = PAGE_SIZE;
++	while(bytes == len) {
++		bytes = src_file->f_op->read(src_file, buf, len,
++					     &src_file->f_pos);
++		tmp = tgt_file->f_op->write(tgt_file, buf, bytes,
++					    &tgt_file->f_pos);
++		if(tmp != bytes) {
++			printk(KERN_CRIT "mini_fo_cp_cont: ERROR writing.\n");
++			goto out_close_unset;
++		}
++	}
++
++	free_page((unsigned long) buf);
++	set_fs(old_fs);
++	fput(tgt_file);
++	fput(src_file);
++	goto out;
++
++ out_close_unset:
++	free_page((unsigned long) buf);
++	set_fs(old_fs);
++
++ out_close:
++	fput(tgt_file);
++	fput(src_file);
++
++ out_err:
++	dput(tgt_dentry);
++	dput(src_dentry);
++
++	/* mk: not sure if this need to be done */
++	mntput(tgt_mnt);
++	mntput(src_mnt);
++
++ out:
++	return err;
++}
++
++/* mk:
++ * ndl (no-duplicate list) stuff
++ * This is used in mini_fo_readdir, to save the storage directory contents
++ * and later when reading base, match them against the list in order
++ * to avoid duplicates.
++ */
++
++/* add a file specified by name and len to the ndl
++ * Return values: 0 on success, <0 on failure.
++ */
++int ndl_add_entry(struct readdir_data *rd, const char *name, int len)
++{
++	struct ndl_entry *tmp_entry;
++
++	tmp_entry = (struct ndl_entry *)
++		kmalloc(sizeof(struct ndl_entry), GFP_KERNEL);
++	if(!tmp_entry) {
++                printk(KERN_CRIT "mini_fo: ndl_add_entry: out of mem.\n");
++                return -ENOMEM;
++        }
++        tmp_entry->name = (char*) kmalloc(len, GFP_KERNEL);
++        if(!tmp_entry->name) {
++                printk(KERN_CRIT "mini_fo: ndl_add_entry: out of mem.\n");
++                return -ENOMEM;
++        }
++	strncpy(tmp_entry->name, name, len);
++        tmp_entry->len = len;
++
++        list_add(&tmp_entry->list, &rd->ndl_list);
++        rd->ndl_size++;
++        return 0;
++}
++
++/* delete all list entries and free memory */
++void ndl_put_list(struct readdir_data *rd)
++{
++	struct list_head *tmp;
++	struct ndl_entry *tmp_entry;
++
++	if(rd->ndl_size <= 0)
++		return;
++	while(!list_empty(&rd->ndl_list)) {
++		tmp = rd->ndl_list.next;
++                list_del(tmp);
++                tmp_entry = list_entry(tmp, struct ndl_entry, list);
++		kfree(tmp_entry->name);
++                kfree(tmp_entry);
++        }
++	rd->ndl_size = 0;
++}
++
++/* Check if a file specified by name and len is in the ndl
++ * Return value: 0 if not in list, 1 if file is found in ndl.
++ */
++int ndl_check_entry(struct readdir_data *rd, const char *name, int len)
++{
++	struct list_head *tmp;
++	struct ndl_entry *tmp_entry;
++
++	if(rd->ndl_size <= 0)
++		return 0;
++
++	list_for_each(tmp, &rd->ndl_list) {
++                tmp_entry = list_entry(tmp, struct ndl_entry, list);
++                if(tmp_entry->len != len)
++                        continue;
++                if(!strncmp(tmp_entry->name, name, len))
++                        return 1;
++        }
++        return 0;
++}
++
++/* mk:
++ * Recursive function to create corresponding directorys in the storage fs.
++ * The function will build the storage directorys up to dentry.
++ */
++int build_sto_structure(dentry_t *dir, dentry_t *dentry)
++{
++	int err;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++
++	if(dentry->d_parent != dir) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: invalid parameter or meta data corruption [1].\n");
++		return 1;
++	}
++
++       	if(dtost(dir) != MODIFIED) {
++		err = build_sto_structure(dir->d_parent, dentry->d_parent);
++		if(err)
++			return err;
++	}
++
++	/* ok, coming back again. */
++	check_mini_fo_dentry(dentry);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	if(!hidden_sto_dentry) {
++		/*
++		 * This is the case after creating the first
++		 * hidden_sto_dentry.
++		 * After one negative storage_dentry, all pointers to
++		 * hidden_storage dentries are set to NULL. We need to
++		 * create the negative dentry before we create the storage
++		 * file.
++		 */
++		unsigned int len;
++		const unsigned char *name;
++		len = dtohd(dentry)->d_name.len;
++		name = dtohd(dentry)->d_name.name;
++		hidden_sto_dentry = lookup_one_len(name, dtohd2(dir), len);
++		dtohd2(dentry) = hidden_sto_dentry;
++	}
++
++	/* was:	hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	/* lets be safe */
++	if(dtohd2(dir) != hidden_sto_dir_dentry) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: invalid parameter or meta data corruption [2].\n");
++		return 1;
++	}
++
++	/* check for errors in lock_parent */
++	err = PTR_ERR(hidden_sto_dir_dentry);
++	if(IS_ERR(hidden_sto_dir_dentry)) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: lock_parent failed.\n");
++		return err;
++	}
++
++	err = vfs_mkdir(hidden_sto_dir_dentry->d_inode,
++			hidden_sto_dentry,
++			dir->d_inode->i_mode);
++
++	if(err) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: failed to create storage dir [1].\n");
++		/* was: unlock_dir(dir); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&dir->d_inode->i_mutex);
++#else
++		up(&dir->d_inode->i_sem);
++#endif
++		dput(dir);
++		return err;
++	}
++
++	/* everything ok! */
++	if(!dtohd2(dentry)->d_inode) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: failed to create storage dir [2].\n");
++		/* was: unlock_dir(dir); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&dir->d_inode->i_mutex);
++#else
++		up(&dir->d_inode->i_sem);
++#endif
++		dput(dir);
++		return 1;
++	}
++
++	/* interpose the new inode and set new state */
++	itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++	dtopd(dentry)->state = MODIFIED;
++
++	/* initalize the wol list */
++	itopd(dentry->d_inode)->deleted_list_size = -1;
++	itopd(dentry->d_inode)->renamed_list_size = -1;
++	meta_build_lists(dentry);
++
++	fist_copy_attr_all(dentry->d_inode, itohi2(dentry->d_inode));
++	fist_copy_attr_timesizes(dir->d_inode,
++				 hidden_sto_dir_dentry->d_inode);
++	dir->d_inode->i_nlink++;
++	/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++	return 0;
++}
++
++
++#if 0 /* unused */
++
++/*
++ * Read "len" bytes from "filename" into "buf".
++ * "buf" is in kernel space.
++ */
++int
++mini_fo_read_file(const char *filename, void *buf, int len)
++{
++    file_t *filp;
++    mm_segment_t oldfs;
++    int bytes;
++    /* Chroot? Maybe NULL isn't right here */
++    filp = filp_open(filename, O_RDONLY, 0);
++    if (!filp || IS_ERR(filp)) {
++	printk("mini_fo_read_file err %d\n", (int) PTR_ERR(filp));
++	return -1;  /* or do something else */
++    }
++
++    if (!filp->f_op->read)
++	return -2;  /* file(system) doesn't allow reads */
++
++    /* now read len bytes from offset 0 */
++    filp->f_pos = 0;		/* start offset */
++    oldfs = get_fs();
++    set_fs(KERNEL_DS);
++    bytes = filp->f_op->read(filp, buf, len, &filp->f_pos);
++    set_fs(oldfs);
++
++    /* close the file */
++    fput(filp);
++
++    return bytes;
++}
++
++
++
++/*
++ * Write "len" bytes from "buf" to "filename"
++ * "buf" is in kernel space.
++ */
++int
++mini_fo_write_file(const char *filename, void *buf, int len)
++{
++    file_t *filp;
++    mm_segment_t oldfs;
++    int bytes;
++				/* Chroot? Maybe NULL isn't right here */
++    filp = filp_open(filename, O_RDWR|O_CREAT, 0640);
++    if (!filp || IS_ERR(filp)) {
++	printk("mini_fo_write_file err %d\n", (int) PTR_ERR(filp));
++	return -1;  /* or do something else */
++    }
++
++    if (!filp->f_op->write)
++	return -2;  /* file(system) doesn't allow writes */
++
++    /* now write len bytes from offset 0 */
++    filp->f_pos = 0;		/* start offset */
++    oldfs = get_fs();
++    set_fs(KERNEL_DS);
++    bytes = filp->f_op->write(filp, buf, len, &filp->f_pos);
++    set_fs(oldfs);
++
++    /* close the file */
++    fput(filp);
++
++    return bytes;
++}
++
++#endif /* unused */
++
+--- /dev/null
++++ b/fs/mini_fo/ChangeLog
+@@ -0,0 +1,281 @@
++2006-01-24  Markus Klotzbuecher  <mk@mary.denx.de>
++
++	* Add tons of ugly ifdefs to Ed L. Cashin's mutex patch to
++          retain backwards compatibility.
++
++2006-01-24  Ed L. Cashin <ecashin@coraid.com>
++
++	* Support for the new mutex infrastructure
++	(7892f2f48d165a34b0b8130c8a195dfd807b8cb6)
++
++2005-10-15  Markus Klotzbuecher  <mk@localhost.localdomain>
++
++	* Bugfix for a serious memory leak in mini_fo_follow_link.
++
++2005-09-21  Markus Klotzbuecher  <mk@mary>
++
++	* new release 0.6.1
++
++	* fix of a compiler warning due to changes in 2.6.13
++
++2005-09-21  Klaus Wenninger  <klaus.wenninger@siemens.com>
++
++	* file.c: readdir: fix for a bug that caused directory entries
++          to show up twice when using storage filesystems such as
++          minixfs or pramfs.
++
++2005-06-30  Eric Lammerts <eric@lammerts.org>
++
++	* fix for an oops when overwriting a binary thats beeing
++          executed.
++
++2005-06-09    <mk@mary>
++
++	* Renamed overlay to mini_fo-overlay.
++
++	* Added mini_fo-merge script to allow merging of storage and base
++	after making modifications.
++
++2005-05-22  root  <mk@mary>
++
++	* Added overlay script that allows to easily mount mini_fo ontop
++	of a given base directory
++
++2005-05-10    <mk@mary>
++
++	* inode.c: xattr functions return -EOPNOSUPP instead of
++          -ENOSUPP, what confuses "ls -l"
++
++	* Changed license from LGPL to GPL.
++
++2005-05-08  root  <mk@mary>
++
++	* Makefile: clean it up and added make install and make
++          uninstall.
++
++2005-05-06    <mk@mary>
++
++	* merged devel branch back to main. [v0-6-0-pre3]
++
++	* removed unused files print.c and fist_ioctl. [devel-0-0-18]
++
++	* ioctl: removed fist_ioctl stuff, that is not needed for
++          now.
++
++2005-05-03    <mk@mary>
++
++	* file.c: simplified mini_fo_open and mini_fo_setattr using
++          new state changing functions. [devel-0-0-17]
++
++	* inode.c: Fixed getattr state bug (see below) in 2.4 function
++          mini_fo_inode revalidate.
++
++	* inode.c: found an other bug in mini_fo_getattr. States are not
++	  reliable in this function, as a file can be opened, unlinked and
++	  the getattr function called. This results in a deleted dentry
++	  with an inode. Fix is to ignore states and simply use the inode
++	  available.
++
++2005-04-29    <mk@mary>
++
++	* file.c: Bugfix and cleanup in fasync and fsync. [devel-0-0-16]
++
++	* file.c: do not use mini_fo_lock so the generic version is
++          used (I guess).
++
++	* inode.c: getattr, never call getattr on lower files, as this
++          will cause the inum to change.
++
++	* inode.c: rename_reg_file renamed to rename_nondir, as it
++          doesn't matter as long it't not a dir. Removed all
++          rename_dev_file etc.
++
++	* tagged as devel-0-0-15
++
++	* inode.c: added support for chosing support for extended
++          attrs at compile time by XATTR define in mini_fo.h .
++
++	* inode.c: fixed mini_fo_getattr to use mini_fo inode and not
++          lower again, what avoids inode number changes that confused
++          rm again. This is the proper solution.
++
++2005-04-24    <mk@mary>
++
++	* all files: updated Copyright notive to 2005. [devel-0-0-14]
++
++	* inode.c: fixed mini_fo_getattr to not change the inode
++          number, even if lower files change.
++
++	* super.c: fixed a bug that caused deleted base file to show
++          up suddenly after some time, or after creating a special
++          file. The problem was that after some time or after special
++          file creating sync_sb_inodes is called by the vfs, that
++          called our mini_fo_put_inode. There was (wrongly) called
++          __meta_put_lists, that nuked the lists, although the inode
++          was going to continue its life. Moving __meta_put_lists to
++          mini_fo_clear_inode, where an inode is really destroyed,
++          solved the problem.
++
++
++2005-04-23    <mk@mary>
++
++	* state.c, aux.c: more cleaning up and
++          simplifications. [devel-0-0-13]
++
++	* inode.c: implemented mini_fo_getattr, that was required for
++          2.6 because inode_revalidate has been remove there, and the
++	  old "du" bug returned.
++
++
++2005-04-20    <mk@mary>
++
++	* aux.c: get_neg_sto_dentry(): allow to be called for dentries
++          in state UNMODIFIED, NON_EXISTANT _and_ DELETED.
++
++2005-04-19    <mk@mary>
++
++	* Fixed a bug under 2.6 that caused files deleted via mini_fo
++          not to be deleted properly and therefore the fs filled up
++          untill no memory was left. [devel-0-0-12]
++
++	* Added basic hard link support. This means that creating
++          hardlinks will work, but existing ones will be treated as
++          individual files. [devel-0-0-11]
++
++2005-04-17    <mk@mary>
++
++	* Bugfixes
++
++2005-04-13  root  <mk@mary>
++
++	* Added file state.c for the state transition
++          functions. Doesn't work very well yet, though...
++
++2005-04-12    <mk@mary>
++
++	* Porting to 2.6 started, which is easier than expected, also
++          due to Olivier previous work.
++
++2005-04-08    <mk@mary>
++
++	* Fixed the bug that caused du to return invalid sizes of
++          directory trees. The problem was that
++          mini_fo_inode_revalidate didn't always copy the attributes
++          from the base inode properly.
++
++2005-04-01  Markus Klotzbuecher  <mk@chasey>
++
++	* Merged devel branch back to main trunk and updated the
++          RELEASE notes. This will be 0-6-0-pre1.
++
++2005-03-31  Markus Klotzbuecher  <mk@chasey>
++
++	* Fixed some bugs in rename_reg_file, that only showed up in
++          the kernel compile test. Kernel compiles cleanly ontop of
++          mini_fo, now also make mrproper etc. work. Seems pretty stable.
++
++2005-03-28  Markus Klotzbuecher  <mk@chasey>
++
++	* Many, many directory renaming bugfixes and a lot of other
++          cleanup. Dir renaming seems to work relatively stable.
++
++2005-03-22  Markus Klotzbuecher  <mk@chasey>
++
++	* Finished implementing lightweight directory renaming. Some
++          basic testing indicates it works fine.
++	  Next is to implement testcases for the testsuite and confirm
++          everything is really working ok.
++
++2005-03-18  Markus Klotzbuecher  <mk@chasey>
++
++	* Finished implementing meta.c stuff required for directory
++          renaming.
++
++2005-03-17  Markus Klotzbuecher  <mk@chasey>
++
++	* Fixed all compile warnings + an extremly old bug that
++          somehow crept in while reworking the wol stuff to the META
++          system. Turning on -Werror again... :-)
++
++	* Fixed some bugs in the new rename_reg_file function.
++
++	* Rewrote mini_fo rename and split it into several
++          subfunctions, that handle the different types
++          seperately. Rewrote the regular file function aswell, as it
++          was implemented somewhat inefficient.
++
++2005-03-16  Markus Klotzbuecher  <mk@chasey>
++
++	* Implemented new META subsystem, removed old WOL stuff in favor
++	  if it.
++
++	* After some basic testing everything seems ok...
++
++2005-03-11  Markus Klotzbuecher  <mk@chasey>
++
++	* Renaming a non regular file caused trouble because I always
++	  tried to copy the contents. Now I only do this for regular
++	  files. mini_fo_rename still isn't implemented properly, renaming
++	  of device files, symlinks etc. results in a empty regular file
++	  instead of the proper type.
++
++	* Directory renaming suddenly works! What a surprise! I guess
++          this is because renaming is implemented as making a copy and
++          removing the original. Still this might not work
++          everywhere...
++
++2005-03-09  Markus Klotzbuecher  <mk@chasey>
++
++	* Bugfix, when a mini_fo directory that exists in storage
++  	  (state: MODIFIED, CREATED and DEL_REWRITTEN) is deleted, a
++  	  possibly existing WOL file contained in it needs to be
++  	  deleted too.
++
++	* Starting cleanup: defined state names in order to get rid of
++          the state numbers.
++
++2005-03-08  Markus Klotzbuecher  <mk@chasey>
++
++	* Makefile fix, fist_ioctl was built against wrong sources if ARCH=um
++
++	* Fixed a bug in dentry.c, mini_fo_d_hash. In state 4 =
++          DEL_REWRITTEN the hash was calculated from the base dentry,
++          which was wrong and and caused assertions in
++          __mini_fo_hidden_dentry to fail.
++
++2005-02-21    <mk@mary>
++
++	* Implemented directory deleting (inode.c)
++
++	* main.c: made mini_fo_parse_options a little more robust.
++
++2004-12-22    <mk@mary>
++
++	* Makefile cleanup and uml stuff, removed unneccessary files
++
++	* Created a new and hopefully more informative README
++
++	* CHANGELOG: created a new CHANGELOG and added old entries reversely
++
++
++2004-10-24 Gleb Natapov <gleb@nbase.co.il>
++
++	* Fix: owner and group where not correctly copied from base to
++          storage.
++
++
++2004-10-05 Gleb Natapov <gleb@nbase.co.il>
++
++	* Implementation of fsync, fasync and lock mini_fo functions.
++
++
++2004-09-29 Bob Lee <bob@pantasys.com>
++
++	* Fix of a serious pointer bug
++
++
++2004-09-28 Gleb Natapov <gleb@nbase.co.il>
++
++	* Implementation of mini_fo_mknod and mini_fo_rename, support
++          for device files.
++
+--- /dev/null
++++ b/fs/mini_fo/dentry.c
+@@ -0,0 +1,244 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++
++/*
++ * THIS IS A BOOLEAN FUNCTION: returns 1 if valid, 0 otherwise.
++ */
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_d_revalidate(dentry_t *dentry, struct nameidata *nd)
++#else
++mini_fo_d_revalidate(dentry_t *dentry, int flags)
++#endif
++{
++	int err1 = 1; /* valid = 1, invalid = 0 */
++	int err2 = 1;
++	dentry_t *hidden_dentry;
++	dentry_t *hidden_sto_dentry;
++
++
++	check_mini_fo_dentry(dentry);
++
++	hidden_dentry  = dtohd(dentry);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	if(hidden_dentry &&
++	   hidden_dentry->d_op &&
++	   hidden_dentry->d_op->d_revalidate) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		err1 = hidden_dentry->d_op->d_revalidate(hidden_dentry, nd);
++#else
++		err1 = hidden_dentry->d_op->d_revalidate(hidden_dentry, flags);
++#endif
++	}
++	if(hidden_sto_dentry &&
++	   hidden_sto_dentry->d_op &&
++	   hidden_sto_dentry->d_op->d_revalidate) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		err2 = hidden_sto_dentry->d_op->d_revalidate(hidden_sto_dentry,
++							     nd);
++#else
++		err2 = hidden_sto_dentry->d_op->d_revalidate(hidden_sto_dentry,
++							     flags);
++#endif
++	}
++
++	/* mk: if one of the lower level dentries are valid,
++	 * the mini_fo dentry is too.
++	 */
++	return (err1 || err2);
++}
++
++
++STATIC int
++mini_fo_d_hash(dentry_t *dentry, qstr_t *name)
++{
++	int err = 0;
++	dentry_t *hidden_dentry;
++	dentry_t *hidden_sto_dentry;
++
++	/* hidden_dentry = mini_fo_hidden_dentry(dentry);
++	 * hidden_sto_dentry = mini_fo_hidden_sto_dentry(dentry); */
++
++	/* state 1, 3, 4, 5: build the hash for the storage dentry */
++	if((dtopd(dentry)->state == MODIFIED) ||
++	   (dtopd(dentry)->state == CREATED) ||
++	   (dtopd(dentry)->state == DEL_REWRITTEN) ||
++	   (dtopd(dentry)->state == DELETED)) {
++		hidden_sto_dentry = dtohd2(dentry);
++		if(hidden_sto_dentry &&
++		   hidden_sto_dentry->d_op &&
++		   hidden_sto_dentry->d_op->d_hash) {
++			err = hidden_sto_dentry->d_op->d_hash(hidden_sto_dentry, name);
++		}
++		goto out;
++	}
++	/* state 2: build the hash for the base dentry */
++	if(dtopd(dentry)->state == UNMODIFIED) {
++		hidden_dentry = dtohd(dentry);
++		if(hidden_dentry &&
++		   hidden_dentry->d_op &&
++		   hidden_dentry->d_op->d_hash) {
++			err = hidden_dentry->d_op->d_hash(hidden_dentry, name);
++		}
++		goto out;
++	}
++	/* state 6: build hash for the dentry that exists */
++	if(dtopd(dentry)->state == NON_EXISTANT) {
++		hidden_sto_dentry = dtohd2(dentry);
++		if(hidden_sto_dentry &&
++		   hidden_sto_dentry->d_op &&
++		   hidden_sto_dentry->d_op->d_hash) {
++			err = hidden_sto_dentry->d_op->d_hash(hidden_sto_dentry, name);
++			goto out;
++		}
++		hidden_dentry = dtohd(dentry);
++		if(hidden_dentry &&
++		   hidden_dentry->d_op &&
++		   hidden_dentry->d_op->d_hash) {
++			err = hidden_dentry->d_op->d_hash(hidden_dentry, name);
++			goto out;
++		}
++	}
++
++	printk(KERN_CRIT "mini_fo: d_hash: invalid state detected.\n");
++
++ out:
++	return err;
++}
++
++
++STATIC int
++mini_fo_d_compare(dentry_t *dentry, qstr_t *a, qstr_t *b)
++{
++	int err;
++	dentry_t *hidden_dentry=NULL;
++
++	/* hidden_dentry = mini_fo_hidden_dentry(dentry); */
++	if(dtohd2(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else if(dtohd(dentry))
++		hidden_dentry = dtohd(dentry);
++
++	if (hidden_dentry && hidden_dentry->d_op && hidden_dentry->d_op->d_compare) {
++		err = hidden_dentry->d_op->d_compare(hidden_dentry, a, b);
++	} else {
++		err = ((a->len != b->len) || memcmp(a->name, b->name, b->len));
++	}
++
++	return err;
++}
++
++
++int
++mini_fo_d_delete(dentry_t *dentry)
++{
++	dentry_t *hidden_dentry;
++	dentry_t *hidden_sto_dentry;
++	int err = 0;
++
++	/* this could be a negative dentry, so check first */
++	if (!dtopd(dentry)) {
++		printk(KERN_CRIT "mini_fo_d_delete: negative dentry passed.\n");
++		goto out;
++	}
++	hidden_dentry = dtohd(dentry);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	if(hidden_dentry) {
++		if(hidden_dentry->d_op &&
++		   hidden_dentry->d_op->d_delete) {
++			err = hidden_dentry->d_op->d_delete(hidden_dentry);
++		}
++	}
++	if(hidden_sto_dentry) {
++		if(hidden_sto_dentry->d_op &&
++		   hidden_sto_dentry->d_op->d_delete) {
++			err = hidden_sto_dentry->d_op->d_delete(hidden_sto_dentry);
++		}
++	}
++
++ out:
++	return err;
++}
++
++
++void
++mini_fo_d_release(dentry_t *dentry)
++{
++	dentry_t *hidden_dentry;
++	dentry_t *hidden_sto_dentry;
++
++
++	/* this could be a negative dentry, so check first */
++	if (!dtopd(dentry)) {
++		printk(KERN_CRIT "mini_fo_d_release: no private data.\n");
++		goto out;
++	}
++	hidden_dentry = dtohd(dentry);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	if(hidden_dentry) {
++		/* decrement hidden dentry's counter and free its inode */
++		dput(hidden_dentry);
++	}
++	if(hidden_sto_dentry) {
++                /* decrement hidden dentry's counter and free its inode */
++		dput(hidden_sto_dentry);
++	}
++
++	/* free private data (mini_fo_dentry_info) here */
++	kfree(dtopd(dentry));
++	__dtopd(dentry) = NULL;	/* just to be safe */
++ out:
++	return;
++}
++
++
++/*
++ * we don't really need mini_fo_d_iput, because dentry_iput will call iput() if
++ * mini_fo_d_iput is not defined. We left this implemented for ease of
++ * tracing/debugging.
++ */
++void
++mini_fo_d_iput(dentry_t *dentry, inode_t *inode)
++{
++	iput(inode);
++}
++
++
++struct dentry_operations mini_fo_dops = {
++	d_revalidate:	mini_fo_d_revalidate,
++	d_hash:		mini_fo_d_hash,
++	d_compare:		mini_fo_d_compare,
++	d_release:		mini_fo_d_release,
++	d_delete:		mini_fo_d_delete,
++	d_iput:		mini_fo_d_iput,
++};
+--- /dev/null
++++ b/fs/mini_fo/file.c
+@@ -0,0 +1,713 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++#define ROUND_UP(x) (((x)+sizeof(long)-1) & ~(sizeof(long)-1))
++
++/*******************
++ * File Operations *
++ *******************/
++
++STATIC loff_t
++mini_fo_llseek(file_t *file, loff_t offset, int origin)
++{
++	loff_t err;
++	file_t *hidden_file = NULL;
++
++	if(S_ISDIR(file->f_dentry->d_inode->i_mode)) {
++		/* Check if trying to llseek from a directory */
++		err = -EISDIR;
++		goto out;
++	}
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			hidden_file = ftohf(file);
++		}
++	}
++
++	/* always set hidden position to this one */
++	hidden_file->f_pos = file->f_pos;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	memcpy(&(hidden_file->f_ra),
++	       &(file->f_ra),
++	       sizeof(struct file_ra_state));
++#else
++	if (file->f_reada) { /* update readahead information if needed */
++		hidden_file->f_reada = file->f_reada;
++		hidden_file->f_ramax = file->f_ramax;
++		hidden_file->f_raend = file->f_raend;
++		hidden_file->f_ralen = file->f_ralen;
++		hidden_file->f_rawin = file->f_rawin;
++	}
++#endif
++	if (hidden_file->f_op && hidden_file->f_op->llseek)
++		err = hidden_file->f_op->llseek(hidden_file, offset, origin);
++	else
++		err = generic_file_llseek(hidden_file, offset, origin);
++
++	if (err < 0)
++		goto out;
++
++	if (err != file->f_pos) {
++		file->f_pos = err;
++		// ION maybe this?
++		// 	file->f_pos = hidden_file->f_pos;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++		file->f_reada = 0;
++#endif
++		file->f_version++;
++	}
++
++ out:
++	return err;
++}
++
++
++/* mk: fanout capable */
++STATIC ssize_t
++mini_fo_read(file_t *file, char *buf, size_t count, loff_t *ppos)
++{
++	int err = -EINVAL;
++	file_t *hidden_file = NULL;
++	loff_t pos = *ppos;
++
++	if(S_ISDIR(file->f_dentry->d_inode->i_mode)) {
++		/* Check if trying to read from a directory */
++		/* printk(KERN_CRIT "mini_fo_read: ERROR: trying to read data from a directory.\n"); */
++		err = -EISDIR;
++		goto out;
++	}
++
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			hidden_file = ftohf(file);
++		}
++	}
++
++	if (!hidden_file->f_op || !hidden_file->f_op->read)
++		goto out;
++
++	err = hidden_file->f_op->read(hidden_file, buf, count, &pos);
++	*ppos = pos;
++
++	if (err >= 0) {
++		/* atime should also be updated for reads of size zero or more */
++		fist_copy_attr_atime(file->f_dentry->d_inode,
++				     hidden_file->f_dentry->d_inode);
++	}
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	/*
++	 * MAJOR HACK
++	 * because pread() does not have any way to tell us that it is
++	 * our caller, then we don't know for sure if we have to update
++	 * the file positions.  This hack relies on read() having passed us
++	 * the "real" pointer of its struct file's f_pos field.
++	 */
++	if (ppos == &file->f_pos)
++		hidden_file->f_pos = *ppos = pos;
++	if (hidden_file->f_reada) { /* update readahead information if needed */
++		file->f_reada = hidden_file->f_reada;
++		file->f_ramax = hidden_file->f_ramax;
++		file->f_raend = hidden_file->f_raend;
++		file->f_ralen = hidden_file->f_ralen;
++		file->f_rawin = hidden_file->f_rawin;
++	}
++#else
++	memcpy(&(file->f_ra),&(hidden_file->f_ra),sizeof(struct file_ra_state));
++#endif
++
++ out:
++	return err;
++}
++
++
++/* this mini_fo_write() does not modify data pages! */
++STATIC ssize_t
++mini_fo_write(file_t *file, const char *buf, size_t count, loff_t *ppos)
++{
++	int err = -EINVAL;
++	file_t *hidden_file = NULL;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	loff_t pos = *ppos;
++
++	/* mk: fan out: */
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			/* This is bad! We have no storage file to write to. This
++			 * should never happen because if a file is opened for
++			 * writing, a copy should have been made earlier.
++			 */
++			printk(KERN_CRIT "mini_fo: write : ERROR, no storage file to write.\n");
++			err = -EINVAL;
++			goto out;
++		}
++	}
++
++	inode = file->f_dentry->d_inode;
++	hidden_inode = itohi2(inode);
++	if(!hidden_inode) {
++		printk(KERN_CRIT "mini_fo: write: no sto inode found, not good.\n");
++		goto out;
++	}
++
++	if (!hidden_file->f_op || !hidden_file->f_op->write)
++		goto out;
++
++	/* adjust for append -- seek to the end of the file */
++	if (file->f_flags & O_APPEND)
++		pos = inode->i_size;
++
++	err = hidden_file->f_op->write(hidden_file, buf, count, &pos);
++
++	/*
++	 * copy ctime and mtime from lower layer attributes
++	 * atime is unchanged for both layers
++	 */
++	if (err >= 0)
++		fist_copy_attr_times(inode, hidden_inode);
++
++	*ppos = pos;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	/*
++	 * XXX: MAJOR HACK
++	 *
++	 * because pwrite() does not have any way to tell us that it is
++	 * our caller, then we don't know for sure if we have to update
++	 * the file positions.  This hack relies on write() having passed us
++	 * the "real" pointer of its struct file's f_pos field.
++	 */
++	if (ppos == &file->f_pos)
++		hidden_file->f_pos = *ppos = pos;
++#endif
++	/* update this inode's size */
++	if (pos > inode->i_size)
++		inode->i_size = pos;
++
++ out:
++	return err;
++}
++
++/* Global variable to hold a file_t pointer.
++ * This serves to allow mini_fo_filldir function to know which file is
++ * beeing read, which is required for two reasons:
++ *
++ *   - be able to call wol functions in order to avoid listing deleted
++ *     base files.
++ *   - if we're reading a directory which is in state 1, we need to
++ *     maintain a list (in mini_fo_filldir) of which files allready
++ *     have been copied to userspace,to detect files existing in base
++ *     and storage and not list them twice.
++ */
++filldir_t mini_fo_filldir_orig;
++file_t *mini_fo_filldir_file;
++
++/* mainly copied from fs/readdir.c */
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++mini_fo_filldir(void * __buf, const char * name, int namlen, loff_t offset,
++		  u64 ino, unsigned int d_type)
++#else
++mini_fo_filldir(void * __buf, const char * name, int namlen, loff_t offset,
++		  ino_t ino, unsigned int d_type)
++#endif
++{
++	struct getdents_callback * buf = (struct getdents_callback *) __buf;
++	file_t* file = mini_fo_filldir_file;
++
++	/* In theses states we filter meta files in storage (WOL) */
++	if(file && (dtopd(file->f_dentry)->state == MODIFIED ||
++		    dtopd(file->f_dentry)->state == CREATED ||
++		    dtopd(file->f_dentry)->state == DEL_REWRITTEN)) {
++
++		int tmp = strlen(META_FILENAME);
++		if(tmp  == namlen) {
++			if(!strncmp(name, META_FILENAME, namlen))
++				return 0;
++		}
++	}
++
++	/* check if we are merging the contents of storage and base */
++	if(file && dtopd(file->f_dentry)->state == MODIFIED) {
++		/* check if we are still reading storage contents, if
++		 * yes, we just save the name of the file for duplicate
++		 * checking later. */
++
++		if(!ftopd(file)->rd.sto_done) {
++			/* put file into ndl list */
++			if(ndl_add_entry(&ftopd(file)->rd, name, namlen))
++				printk(KERN_CRIT "mini_fo_filldir: Error adding to ndl.\n");
++		} else {
++			/* check if file has been deleted */
++			if(meta_check_d_entry(file->f_dentry, name, namlen))
++				return 0;
++
++			/* do duplicate checking */
++			if(ndl_check_entry(&ftopd(file)->rd, name, namlen))
++				return 0;
++		}
++	}
++
++	return mini_fo_filldir_orig(buf, name, namlen, offset, ino, d_type);
++}
++
++
++STATIC int
++mini_fo_readdir(file_t *file, void *dirent, filldir_t filldir)
++{
++	int err = 0;/* mk: ??? -ENOTDIR; */
++	file_t *hidden_file = NULL;
++	file_t *hidden_sto_file = NULL;
++	inode_t *inode;
++	struct getdents_callback *buf;
++	int oldcount;
++
++#if defined(FIST_FILTER_NAME) || defined(FIST_FILTER_SCA)
++	struct mini_fo_getdents_callback buf;
++#endif /* FIST_FILTER_NAME || FIST_FILTER_SCA */
++
++	buf = (struct getdents_callback *) dirent;
++	oldcount = buf->count;
++	inode = file->f_dentry->d_inode;
++	mini_fo_filldir_file = file;
++	mini_fo_filldir_orig = filldir;
++
++	ftopd(file)->rd.sto_done = 0;
++	do {
++		if (ftopd(file) != NULL) {
++			if(ftohf2(file)) {
++				hidden_sto_file = ftohf2(file);
++				err = vfs_readdir(hidden_sto_file, mini_fo_filldir, dirent);
++				file->f_pos = hidden_sto_file->f_pos;
++				if (err > 0)
++					fist_copy_attr_atime(inode, hidden_sto_file->f_dentry->d_inode);
++				/* not finshed yet, we'll be called again */
++				if (buf->count != oldcount)
++					break;
++			}
++
++			ftopd(file)->rd.sto_done = 1;
++
++			if(ftohf(file)) {
++				hidden_file = ftohf(file);
++				err = vfs_readdir(hidden_file, mini_fo_filldir, dirent);
++				file->f_pos = hidden_file->f_pos;
++				if (err > 0)
++					fist_copy_attr_atime(inode, hidden_file->f_dentry->d_inode);
++			}
++
++		}
++	} while (0);
++
++	/* mk:
++	 * we need to check if all the directory data has been copied to userspace,
++	 * or if we will be called again by userspace to complete the operation.
++	 */
++	if(buf->count == oldcount) {
++		ndl_put_list(&ftopd(file)->rd);
++	}
++
++	/* unset this, safe */
++	mini_fo_filldir_file = NULL;
++	return err;
++}
++
++
++STATIC unsigned int
++mini_fo_poll(file_t *file, poll_table *wait)
++{
++	unsigned int mask = DEFAULT_POLLMASK;
++	file_t *hidden_file = NULL;
++
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			hidden_file = ftohf(file);
++		}
++	}
++
++	if (!hidden_file->f_op || !hidden_file->f_op->poll)
++		goto out;
++
++	mask = hidden_file->f_op->poll(hidden_file, wait);
++
++ out:
++	return mask;
++}
++
++/* FIST-LITE special version of mmap */
++STATIC int
++mini_fo_mmap(file_t *file, vm_area_t *vma)
++{
++	int err = 0;
++	file_t *hidden_file = NULL;
++
++	/* fanout capability */
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			hidden_file = ftohf(file);
++		}
++	}
++
++	ASSERT(hidden_file != NULL);
++	ASSERT(hidden_file->f_op != NULL);
++	ASSERT(hidden_file->f_op->mmap != NULL);
++
++	vma->vm_file = hidden_file;
++	err = hidden_file->f_op->mmap(hidden_file, vma);
++	get_file(hidden_file); /* make sure it doesn't get freed on us */
++	fput(file);	       /* no need to keep extra ref on ours */
++
++	return err;
++}
++
++
++
++STATIC int
++mini_fo_open(inode_t *inode, file_t *file)
++{
++	int err = 0;
++ 	int hidden_flags;
++	file_t *hidden_file = NULL;
++	dentry_t *hidden_dentry = NULL;
++
++	/* fanout stuff */
++	file_t *hidden_sto_file = NULL;
++	dentry_t *hidden_sto_dentry = NULL;
++
++	__ftopd(file) =
++		kmalloc(sizeof(struct mini_fo_file_info), GFP_KERNEL);
++	if (!ftopd(file)) {
++		err = -ENOMEM;
++		goto out;
++	}
++
++	/* init the readdir_helper structure */
++	INIT_LIST_HEAD(&ftopd(file)->rd.ndl_list);
++	ftopd(file)->rd.ndl_size = 0;
++
++	/* In certain paths this could stay uninitalized and cause trouble */
++	ftohf(file) = NULL;
++	ftohf2(file) = NULL;
++	hidden_flags = file->f_flags;
++
++	/* create storage files? */
++	if(dtost(file->f_dentry) == UNMODIFIED) {
++		if(!IS_WRITE_FLAG(file->f_flags)) {
++			hidden_dentry = dtohd(file->f_dentry);
++			dget(hidden_dentry);
++			/* dentry_open will decrement mnt refcnt if err.
++			 * otherwise fput() will do an mntput() for us upon file close. */
++			mntget(stopd(inode->i_sb)->hidden_mnt);
++			hidden_file = dentry_open(hidden_dentry,
++						  stopd(inode->i_sb)->hidden_mnt,
++						  hidden_flags);
++			if (IS_ERR(hidden_file)) {
++				err = PTR_ERR(hidden_file);
++				dput(hidden_dentry);
++				goto out;
++			}
++			ftohf(file) = hidden_file;	/* link two files */
++			goto out;
++		}
++		else {
++			if(S_ISDIR(file->f_dentry->d_inode->i_mode)) {
++				err = dir_unmod_to_mod(file->f_dentry);
++			} else
++				err = nondir_unmod_to_mod(file->f_dentry, 1);
++
++			if (err) {
++				printk("mini_fo_open: ERROR creating storage file.\n");
++				goto out;
++			}
++		}
++	}
++	hidden_sto_dentry = dtohd2(file->f_dentry);
++	dget(hidden_sto_dentry);
++
++	if(dtopd(file->f_dentry)->state == MODIFIED) {
++		/* Directorys are special, interpose on both lower level files */
++		if(S_ISDIR(itohi(inode)->i_mode)) {
++			/* check for invalid file types of lower level files */
++			if(!(S_ISDIR(itohi(inode)->i_mode) && S_ISDIR(itohi2(inode)->i_mode))) {
++				printk(KERN_CRIT "mini_fo_open: meta data corruption detected.\n");
++				dput(hidden_sto_dentry);
++				err = -EINVAL;
++				goto out;
++			}
++
++			/* lower level directorys are ok, open the base file */
++			hidden_dentry = dtohd(file->f_dentry);
++			dget(hidden_dentry);
++
++			mntget(stopd(inode->i_sb)->hidden_mnt);
++			hidden_file = dentry_open(hidden_dentry,
++						  stopd(inode->i_sb)->hidden_mnt,
++						  hidden_flags);
++			if (IS_ERR(hidden_file)) {
++				err = PTR_ERR(hidden_file);
++				dput(hidden_dentry);
++				dput(hidden_sto_dentry);
++				goto out;
++			}
++			ftohf(file) = hidden_file; /* link the two files */
++		}
++	}
++
++	if(!exists_in_storage(file->f_dentry)) {
++		printk(KERN_CRIT "mini_fo_open: invalid file state detected.\n");
++		err = -EINVAL;
++		dput(hidden_sto_dentry);
++
++		/* If the base file has been opened, we need to close it here */
++		if(ftohf(file)) {
++			if (hidden_file->f_op && hidden_file->f_op->flush)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++				hidden_file->f_op->flush(hidden_file, NULL);
++#else
++				hidden_file->f_op->flush(hidden_file);
++#endif
++			dput(hidden_dentry);
++		}
++		goto out;
++	}
++
++	/* ok, now we can safely open the storage file */
++	mntget(stopd(inode->i_sb)->hidden_mnt2);
++	hidden_sto_file = dentry_open(hidden_sto_dentry,
++				      stopd(inode->i_sb)->hidden_mnt2,
++				      hidden_flags);
++
++	/* dentry_open dputs the dentry if it fails */
++	if (IS_ERR(hidden_sto_file)) {
++		err = PTR_ERR(hidden_sto_file);
++		/* close base file if open */
++		if(ftohf(file)) {
++			if (hidden_file->f_op && hidden_file->f_op->flush)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++				hidden_file->f_op->flush(hidden_file, NULL);
++#else
++				hidden_file->f_op->flush(hidden_file);
++#endif
++			dput(hidden_dentry);
++		}
++		goto out;
++	}
++	ftohf2(file) = hidden_sto_file; /* link storage file */
++
++ out:
++	if (err < 0 && ftopd(file)) {
++		kfree(ftopd(file));
++	}
++	return err;
++}
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++mini_fo_flush(file_t *file, fl_owner_t id)
++#else
++mini_fo_flush(file_t *file)
++#endif
++{
++	int err1 = 0;		/* assume ok (see open.c:close_fp) */
++	int err2 = 0;
++	file_t *hidden_file = NULL;
++
++	check_mini_fo_file(file);
++
++	/* mk: we don't do any state checking here, as its not worth the time.
++	 * Just flush the lower level files if they exist.
++	 */
++	if(ftopd(file) != NULL) {
++		if(ftohf(file) != NULL) {
++			hidden_file = ftohf(file);
++			if (hidden_file->f_op && hidden_file->f_op->flush)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++				err1 = hidden_file->f_op->flush(hidden_file, id);
++#else
++				err1 = hidden_file->f_op->flush(hidden_file);
++#endif
++		}
++		if(ftohf2(file) != NULL) {
++			hidden_file = ftohf2(file);
++			if (hidden_file->f_op && hidden_file->f_op->flush)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++				err2 = hidden_file->f_op->flush(hidden_file, id);
++#else
++				err2 = hidden_file->f_op->flush(hidden_file);
++#endif
++		}
++	}
++	return (err1 | err2);
++}
++
++
++STATIC int
++mini_fo_release(inode_t *inode, file_t *file)
++{
++	int err = 0;
++	file_t *hidden_file = NULL;
++
++	if (ftopd(file) != NULL) {
++		if(ftohf(file)) {
++			hidden_file = ftohf(file);
++			fput(hidden_file);
++		}
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++			fput(hidden_file);
++		}
++		kfree(ftopd(file));
++	}
++	return err;
++}
++
++STATIC int
++mini_fo_fsync(file_t *file, dentry_t *dentry, int datasync)
++{
++	int err1 = 0;
++	int err2 = 0;
++	file_t *hidden_file = NULL;
++	dentry_t *hidden_dentry;
++
++	check_mini_fo_file(file);
++
++	if ((hidden_file = ftohf(file)) != NULL) {
++		hidden_dentry = dtohd(dentry);
++		if (hidden_file->f_op && hidden_file->f_op->fsync) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++			mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++			down(&hidden_dentry->d_inode->i_sem);
++#endif
++			err1 = hidden_file->f_op->fsync(hidden_file, hidden_dentry, datasync);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++			mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++			up(&hidden_dentry->d_inode->i_sem);
++#endif
++		}
++	}
++
++	if ((hidden_file = ftohf2(file)) != NULL) {
++		hidden_dentry = dtohd2(dentry);
++		if (hidden_file->f_op && hidden_file->f_op->fsync) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++			mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++			down(&hidden_dentry->d_inode->i_sem);
++#endif
++			err2 = hidden_file->f_op->fsync(hidden_file, hidden_dentry, datasync);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++			mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++			up(&hidden_dentry->d_inode->i_sem);
++#endif
++		}
++	}
++	else
++		goto err;
++
++err:
++	return (err1 || err2);
++}
++
++
++STATIC int
++mini_fo_fasync(int fd, file_t *file, int flag)
++{
++	int err1 = 0;
++	int err2 = 0;
++
++	file_t *hidden_file = NULL;
++
++	check_mini_fo_file(file);
++
++	if((hidden_file = ftohf(file)) != NULL) {
++		err1 = hidden_file->f_op->fasync(fd, hidden_file, flag);
++	}
++	if((hidden_file = ftohf2(file)) != NULL) {
++		err2 = hidden_file->f_op->fasync(fd, hidden_file, flag);
++	}
++
++	return (err1 || err2);
++}
++
++
++
++struct file_operations mini_fo_dir_fops =
++	{
++		read:	generic_read_dir,
++		write:	mini_fo_write,
++		readdir: mini_fo_readdir,
++		poll:	mini_fo_poll,
++		/* ioctl:	mini_fo_ioctl, */
++		mmap:	mini_fo_mmap,
++		open:	mini_fo_open,
++		flush:	mini_fo_flush,
++		release: mini_fo_release,
++		fsync:	mini_fo_fsync,
++		fasync:	mini_fo_fasync,
++		/* not needed lock:	mini_fo_lock, */
++		/* not needed: readv */
++		/* not needed: writev */
++		/* not implemented: sendpage */
++		/* not implemented: get_unmapped_area */
++	};
++
++struct file_operations mini_fo_main_fops =
++	{
++		llseek:	mini_fo_llseek,
++		read:	mini_fo_read,
++		write:	mini_fo_write,
++		readdir: mini_fo_readdir,
++		poll:	mini_fo_poll,
++		/* ioctl:	mini_fo_ioctl, */
++		mmap:	mini_fo_mmap,
++		open:	mini_fo_open,
++		flush:	mini_fo_flush,
++		release: mini_fo_release,
++		fsync:	mini_fo_fsync,
++		fasync:	mini_fo_fasync,
++		/* not needed: lock:	mini_fo_lock, */
++		/* not needed: readv */
++		/* not needed: writev */
++		/* not implemented: sendpage */
++		/* not implemented: get_unmapped_area */
++	};
+--- /dev/null
++++ b/fs/mini_fo/fist.h
+@@ -0,0 +1,252 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++
++/*
++ *  $Id$
++ */
++
++#ifndef __FIST_H_
++#define __FIST_H_
++
++/*
++ * KERNEL ONLY CODE:
++ */
++#ifdef __KERNEL__
++#include <linux/version.h>
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19)
++#include <linux/autoconf.h>
++#else
++#include <linux/config.h>
++#endif
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++#ifdef CONFIG_MODVERSIONS
++# define MODVERSIONS
++# include <linux/modversions.h>
++#endif /* CONFIG_MODVERSIONS */
++#endif /* KERNEL_VERSION < 2.6.0 */
++#include <linux/sched.h>
++#include <linux/kernel.h>
++#include <linux/mm.h>
++#include <linux/string.h>
++#include <linux/stat.h>
++#include <linux/errno.h>
++#include <linux/wait.h>
++#include <linux/limits.h>
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++#include <linux/locks.h>
++#else
++#include <linux/buffer_head.h>
++#include <linux/pagemap.h>
++#include <linux/namei.h>
++#include <linux/module.h>
++#include <linux/mount.h>
++#include <linux/page-flags.h>
++#include <linux/writeback.h>
++#include <linux/statfs.h>
++#endif
++#include <linux/smp.h>
++#include <linux/smp_lock.h>
++#include <linux/file.h>
++#include <linux/slab.h>
++#include <linux/vmalloc.h>
++#include <linux/poll.h>
++#include <linux/list.h>
++#include <linux/init.h>
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20)
++#include <linux/xattr.h>
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#include <linux/security.h>
++#endif
++
++#include <linux/swap.h>
++
++#include <asm/system.h>
++/* #include <asm/segment.h> */
++#include <asm/mman.h>
++#include <linux/seq_file.h>
++
++/*
++ * MACROS:
++ */
++
++/* those mapped to ATTR_* were copied from linux/fs.h */
++#define FA_MODE		ATTR_MODE
++#define FA_UID		ATTR_UID
++#define FA_GID		ATTR_GID
++#define FA_SIZE		ATTR_SIZE
++#define FA_ATIME	ATTR_ATIME
++#define FA_MTIME	ATTR_MTIME
++#define FA_CTIME	ATTR_CTIME
++#define FA_ATIME_SET	ATTR_ATIME_SET
++#define FA_MTIME_SET	ATTR_MTIME_SET
++#define FA_FORCE	ATTR_FORCE
++#define FA_ATTR_FLAGS	ATTR_ATTR_FLAG
++
++/* must be greater than all other ATTR_* flags! */
++#define FA_NLINK	2048
++#define FA_BLKSIZE	4096
++#define FA_BLOCKS	8192
++#define FA_TIMES	(FA_ATIME|FA_MTIME|FA_CTIME)
++#define FA_ALL		0
++
++/* macros to manage changes between kernels */
++#define INODE_DATA(i)	(&(i)->i_data)
++
++#define MIN(x,y) ((x < y) ? (x) : (y))
++#define MAX(x,y) ((x > y) ? (x) : (y))
++#define MAXPATHLEN PATH_MAX
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,5)
++# define lookup_one_len(a,b,c) lookup_one(a,b)
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,4,5) */
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,8)
++# define generic_file_llseek default_llseek
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,4,8) */
++
++#ifndef SEEK_SET
++# define SEEK_SET 0
++#endif /* not SEEK_SET */
++
++#ifndef SEEK_CUR
++# define SEEK_CUR 1
++#endif /* not SEEK_CUR */
++
++#ifndef SEEK_END
++# define SEEK_END 2
++#endif /* not SEEK_END */
++
++#ifndef DEFAULT_POLLMASK
++# define DEFAULT_POLLMASK (POLLIN | POLLOUT | POLLRDNORM | POLLWRNORM)
++#endif /* not DEFAULT_POLLMASK */
++
++/* XXX: fix this so fistgen generates kfree() code directly */
++#define kfree_s(a,b) kfree(a)
++
++/*
++ * TYPEDEFS:
++ */
++typedef struct dentry dentry_t;
++typedef struct file file_t;
++typedef struct inode inode_t;
++typedef inode_t vnode_t;
++typedef struct page page_t;
++typedef struct qstr qstr_t;
++typedef struct super_block super_block_t;
++typedef super_block_t vfs_t;
++typedef struct vm_area_struct vm_area_t;
++
++
++/*
++ * EXTERNALS:
++ */
++
++#define FPPF(str,page) printk("PPF %s 0x%x/%d: Lck:%d Err:%d Ref:%d Upd:%d Other::%d:%d:%d:%d:\n", \
++		str, \
++		(int) page, \
++		(int) page->index, \
++		(PageLocked(page) ? 1 : 0), \
++		(PageError(page) ? 1 : 0), \
++		(PageReferenced(page) ? 1 : 0), \
++		(Page_Uptodate(page) ? 1 : 0), \
++		(PageDecrAfter(page) ? 1 : 0), \
++		(PageSlab(page) ? 1 : 0), \
++		(PageSwapCache(page) ? 1 : 0), \
++		(PageReserved(page) ? 1 : 0) \
++		)
++#define EZKDBG printk("EZK %s:%d:%s\n",__FILE__,__LINE__,__FUNCTION__)
++#if 0
++# define EZKDBG1 printk("EZK %s:%d\n",__FILE__,__LINE__)
++#else
++# define EZKDBG1
++#endif
++
++extern int fist_get_debug_value(void);
++extern int fist_set_debug_value(int val);
++#if 0 /* mini_fo doesn't need these */
++extern void fist_dprint_internal(int level, char *str,...);
++extern void fist_print_dentry(char *str, const dentry_t *dentry);
++extern void fist_print_inode(char *str, const inode_t *inode);
++extern void fist_print_file(char *str, const file_t *file);
++extern void fist_print_buffer_flags(char *str, struct buffer_head *buffer);
++extern void fist_print_page_flags(char *str, page_t *page);
++extern void fist_print_page_bytes(char *str, page_t *page);
++extern void fist_print_pte_flags(char *str, const page_t *page);
++extern void fist_checkinode(inode_t *inode, char *msg);
++extern void fist_print_sb(char *str, const super_block_t *sb);
++
++/* §$% by mk: special debug functions */
++extern void fist_mk_print_dentry(char *str, const dentry_t *dentry);
++extern void fist_mk_print_inode(char *str, const inode_t *inode);
++
++extern char *add_indent(void);
++extern char *del_indent(void);
++#endif/* mini_fo doesn't need these */
++
++
++#define STATIC
++#define ASSERT(EX)	\
++do {	\
++    if (!(EX)) {	\
++	printk(KERN_CRIT "ASSERTION FAILED: %s at %s:%d (%s)\n", #EX,	\
++	       __FILE__, __LINE__, __FUNCTION__);	\
++	(*((char *)0))=0;	\
++    }	\
++} while (0)
++/* same ASSERT, but tell me who was the caller of the function */
++#define ASSERT2(EX)	\
++do {	\
++    if (!(EX)) {	\
++	printk(KERN_CRIT "ASSERTION FAILED (caller): %s at %s:%d (%s)\n", #EX,	\
++	       file, line, func);	\
++	(*((char *)0))=0;	\
++    }	\
++} while (0)
++
++#if 0 /* mini_fo doesn't need these */
++#define dprintk(format, args...) printk(KERN_DEBUG format, ##args)
++#define fist_dprint(level, str, args...) fist_dprint_internal(level, KERN_DEBUG str, ## args)
++#define print_entry_location() fist_dprint(4, "%sIN:  %s %s:%d\n", add_indent(), __FUNCTION__, __FILE__, __LINE__)
++#define print_exit_location() fist_dprint(4, "%s OUT: %s %s:%d\n", del_indent(), __FUNCTION__, __FILE__, __LINE__)
++#define print_exit_status(status) fist_dprint(4, "%s OUT: %s %s:%d, STATUS: %d\n", del_indent(), __FUNCTION__, __FILE__, __LINE__, status)
++#define print_exit_pointer(status) \
++do { \
++  if (IS_ERR(status)) \
++    fist_dprint(4, "%s OUT: %s %s:%d, RESULT: %ld\n", del_indent(), __FUNCTION__, __FILE__, __LINE__, PTR_ERR(status)); \
++  else \
++    fist_dprint(4, "%s OUT: %s %s:%d, RESULT: 0x%x\n", del_indent(), __FUNCTION__, __FILE__, __LINE__, PTR_ERR(status)); \
++} while (0)
++#endif/* mini_fo doesn't need these */
++
++#endif /* __KERNEL__ */
++
++
++/*
++ * DEFINITIONS FOR USER AND KERNEL CODE:
++ * (Note: ioctl numbers 1--9 are reserved for fistgen, the rest
++ *  are auto-generated automatically based on the user's .fist file.)
++ */
++# define FIST_IOCTL_GET_DEBUG_VALUE	_IOR(0x15, 1, int)
++# define FIST_IOCTL_SET_DEBUG_VALUE	_IOW(0x15, 2, int)
++
++#endif /* not __FIST_H_ */
+--- /dev/null
++++ b/fs/mini_fo/inode.c
+@@ -0,0 +1,1564 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_create(inode_t *dir, dentry_t *dentry, int mode, struct nameidata *nd)
++#else
++mini_fo_create(inode_t *dir, dentry_t *dentry, int mode)
++#endif
++{
++	int err = 0;
++
++	check_mini_fo_dentry(dentry);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	err = create_sto_reg_file(dentry, mode, nd);
++#else
++	err = create_sto_reg_file(dentry, mode);
++#endif
++	check_mini_fo_dentry(dentry);
++	return err;
++}
++
++
++STATIC dentry_t *
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_lookup(inode_t *dir, dentry_t *dentry, struct nameidata* nd)
++#else
++mini_fo_lookup(inode_t *dir, dentry_t *dentry)
++#endif
++{
++	int err = 0;
++	dentry_t *hidden_dir_dentry;
++	dentry_t *hidden_dentry = NULL;
++
++	dentry_t *hidden_sto_dir_dentry;
++	dentry_t *hidden_sto_dentry = NULL;
++
++	/* whiteout flag */
++	int del_flag = 0;
++	char *bpath = NULL;
++
++	const char *name;
++	unsigned int namelen;
++
++	/* Don't allow lookups of META-files */
++	namelen = strlen(META_FILENAME);
++	if(namelen == dentry->d_name.len) {
++		if(!strncmp(dentry->d_name.name, META_FILENAME, namelen)) {
++			err = -ENOENT;
++			goto out;
++		}
++	}
++
++	hidden_dir_dentry = dtohd(dentry->d_parent);
++	hidden_sto_dir_dentry = dtohd2(dentry->d_parent);
++
++	name = dentry->d_name.name;
++	namelen = dentry->d_name.len;
++
++	/* must initialize dentry operations */
++	dentry->d_op = &mini_fo_dops;
++
++	/* setup the del_flag */
++	del_flag = __meta_check_d_entry(dir, name, namelen);
++	bpath = __meta_check_r_entry(dir, name, namelen);
++
++	/* perform the lookups of base and storage files:
++	 *
++	 * This caused some serious trouble, as a lookup_one_len passing
++	 * a negative dentry oopses. Solution is to only do the lookup
++	 * if the dentry is positive, else we set it to NULL
++	 * More trouble, who said a *_dir_dentry can't be NULL?
++	 */
++	if(bpath) {
++		/* Cross-Interposing (C), yeah! */
++		hidden_dentry = bpath_walk(dir->i_sb, bpath);
++		if(!hidden_dentry || !hidden_dentry->d_inode) {
++			printk(KERN_CRIT "mini_fo_lookup: bpath_walk failed.\n");
++			err= -EINVAL;
++			goto out;
++		}
++
++		/* this can be set up safely without fear of spaghetti
++		 * interposing as it is only used for copying times */
++		hidden_dir_dentry = hidden_dentry->d_parent;
++		kfree(bpath);
++	}
++	else if(hidden_dir_dentry && hidden_dir_dentry->d_inode)
++		hidden_dentry =
++			lookup_one_len(name, hidden_dir_dentry, namelen);
++	else
++		hidden_dentry = NULL;
++
++	if(hidden_sto_dir_dentry && hidden_sto_dir_dentry->d_inode)
++		hidden_sto_dentry =
++			lookup_one_len(name, hidden_sto_dir_dentry, namelen);
++	else
++		hidden_sto_dentry =  NULL;
++
++	/* catch error in lookup */
++	if (IS_ERR(hidden_dentry) || IS_ERR(hidden_sto_dentry)) {
++		/* mk: we need to call dput on the dentry, whose
++		 * lookup_one_len operation failed, in order to avoid
++		 * unmount trouble.
++		 */
++		if(IS_ERR(hidden_dentry)) {
++			printk(KERN_CRIT "mini_fo_lookup: ERR from base dentry, lookup failed.\n");
++			err = PTR_ERR(hidden_dentry);
++		} else {
++			dput(hidden_dentry);
++		}
++		if(IS_ERR(hidden_sto_dentry)) {
++			printk(KERN_CRIT "mini_fo_lookup: ERR from storage dentry, lookup failed.\n");
++			err = PTR_ERR(hidden_sto_dentry);
++		} else {
++			dput(hidden_sto_dentry);
++		}
++		goto out;
++	}
++
++	/* allocate dentry private data */
++	__dtopd(dentry) = (struct mini_fo_dentry_info *)
++		kmalloc(sizeof(struct mini_fo_dentry_info), GFP_KERNEL);
++
++	if (!dtopd(dentry)) {
++		err = -ENOMEM;
++		goto out_dput;
++	}
++
++	/* check for different states of the mini_fo file to be looked up. */
++
++	/* state 1, file has been modified */
++	if(hidden_dentry && hidden_sto_dentry &&
++	   hidden_dentry->d_inode && hidden_sto_dentry->d_inode && !del_flag) {
++
++		/* update parent directory's atime */
++		fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode);
++
++		dtopd(dentry)->state = MODIFIED;
++		dtohd(dentry) = hidden_dentry;
++		dtohd2(dentry) = hidden_sto_dentry;
++
++		err = mini_fo_tri_interpose(hidden_dentry,
++					    hidden_sto_dentry,
++					    dentry, dir->i_sb, 1);
++		if (err) {
++			printk(KERN_CRIT "mini_fo_lookup: error interposing (state1).\n");
++			goto out_free;
++		}
++		goto out;
++	}
++	/* state 2, file is unmodified */
++	if(hidden_dentry && hidden_dentry->d_inode && !del_flag) {
++
++		fist_copy_attr_atime(dir, hidden_dir_dentry->d_inode);
++
++		dtopd(dentry)->state = UNMODIFIED;
++		dtohd(dentry) = hidden_dentry;
++		dtohd2(dentry) = hidden_sto_dentry; /* could be negative */
++
++		err = mini_fo_tri_interpose(hidden_dentry,
++					    hidden_sto_dentry,
++					    dentry, dir->i_sb, 1);
++		if (err) {
++			printk(KERN_CRIT "mini_fo_lookup: error interposing (state2).\n");
++			goto out_free;
++		}
++		goto out;
++	}
++	/* state 3, file has been newly created */
++	if(hidden_sto_dentry && hidden_sto_dentry->d_inode && !del_flag) {
++
++		fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode);
++		dtopd(dentry)->state = CREATED;
++		dtohd(dentry) = hidden_dentry; /* could be negative */
++		dtohd2(dentry) = hidden_sto_dentry;
++
++		err = mini_fo_tri_interpose(hidden_dentry,
++					    hidden_sto_dentry,
++					    dentry, dir->i_sb, 1);
++		if (err) {
++			printk(KERN_CRIT "mini_fo_lookup: error interposing (state3).\n");
++			goto out_free;
++		}
++		goto out;
++	}
++
++	/* state 4, file has deleted and created again. */
++	if(hidden_dentry && hidden_sto_dentry &&
++	   hidden_dentry->d_inode &&
++	   hidden_sto_dentry->d_inode && del_flag) {
++
++		fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode);
++		dtopd(dentry)->state = DEL_REWRITTEN;
++		dtohd(dentry) = NULL;
++		dtohd2(dentry) = hidden_sto_dentry;
++
++		err = mini_fo_tri_interpose(NULL,
++					    hidden_sto_dentry,
++					    dentry, dir->i_sb, 1);
++		if (err) {
++			printk(KERN_CRIT "mini_fo_lookup: error interposing (state4).\n");
++			goto out_free;
++		}
++		/* We will never need this dentry again, as the file has been
++		 * deleted from base */
++		dput(hidden_dentry);
++		goto out;
++	}
++	/* state 5, file has been deleted in base */
++	if(hidden_dentry && hidden_sto_dentry &&
++	   hidden_dentry->d_inode &&
++	   !hidden_sto_dentry->d_inode && del_flag) {
++
++		/* check which parents atime we need for updating */
++		if(hidden_sto_dir_dentry->d_inode)
++			fist_copy_attr_atime(dir,
++					     hidden_sto_dir_dentry->d_inode);
++		else
++			fist_copy_attr_atime(dir,
++					     hidden_dir_dentry->d_inode);
++
++		dtopd(dentry)->state = DELETED;
++		dtohd(dentry) = NULL;
++		dtohd2(dentry) = hidden_sto_dentry;
++
++		/* add negative dentry to dcache to speed up lookups */
++		d_add(dentry, NULL);
++		dput(hidden_dentry);
++		goto out;
++	}
++	/* state 6, file does not exist */
++	if(((hidden_dentry && !hidden_dentry->d_inode) ||
++	    (hidden_sto_dentry && !hidden_sto_dentry->d_inode)) && !del_flag)
++		{
++			/* check which parents atime we need for updating */
++			if(hidden_sto_dir_dentry && hidden_sto_dir_dentry->d_inode)
++				fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode);
++			else
++				fist_copy_attr_atime(dir, hidden_dir_dentry->d_inode);
++
++			dtopd(dentry)->state = NON_EXISTANT;
++			dtohd(dentry) = hidden_dentry;
++			dtohd2(dentry) = hidden_sto_dentry;
++			d_add(dentry, NULL);
++			goto out;
++		}
++
++	/* if we get to here, were in an invalid state. bad. */
++	printk(KERN_CRIT "mini_fo_lookup: ERROR, meta data corruption detected.\n");
++
++	/* end state checking */
++ out_free:
++	d_drop(dentry);		/* so that our bad dentry will get destroyed */
++	kfree(dtopd(dentry));
++	__dtopd(dentry) = NULL;	/* be safe */
++
++ out_dput:
++	if(hidden_dentry)
++		dput(hidden_dentry);
++	if(hidden_sto_dentry)
++		dput(hidden_sto_dentry); /* drops usage count and marks for release */
++
++ out:
++	/* initalize wol if file exists and is directory */
++	if(dentry->d_inode) {
++		if(S_ISDIR(dentry->d_inode->i_mode)) {
++			itopd(dentry->d_inode)->deleted_list_size = -1;
++			itopd(dentry->d_inode)->renamed_list_size = -1;
++			meta_build_lists(dentry);
++		}
++	}
++	return ERR_PTR(err);
++}
++
++
++STATIC int
++mini_fo_link(dentry_t *old_dentry, inode_t *dir, dentry_t *new_dentry)
++{
++	int err;
++	dentry_t *hidden_old_dentry;
++	dentry_t *hidden_new_dentry;
++	dentry_t *hidden_dir_dentry;
++
++
++	check_mini_fo_dentry(old_dentry);
++	check_mini_fo_dentry(new_dentry);
++	check_mini_fo_inode(dir);
++
++	/* no links to directorys and existing targets target allowed */
++	if(S_ISDIR(old_dentry->d_inode->i_mode) ||
++	   is_mini_fo_existant(new_dentry)) {
++		err = -EPERM;
++		goto out;
++	}
++
++	/* bring it directly from unmod to del_rew */
++	if(dtost(old_dentry) == UNMODIFIED) {
++		err = nondir_unmod_to_mod(old_dentry, 1);
++		if(err) {
++			err = -EINVAL;
++			goto out;
++		}
++		err = meta_add_d_entry(old_dentry->d_parent,
++				       old_dentry->d_name.name,
++				       old_dentry->d_name.len);
++		if(err) {
++			err = -EINVAL;
++			goto out;
++		}
++		dput(dtohd(old_dentry));
++		dtohd(old_dentry) = NULL;
++		dtost(old_dentry) = DEL_REWRITTEN;
++	}
++
++	err = get_neg_sto_dentry(new_dentry);
++	if(err) {
++		err = -EINVAL;
++		goto out;
++	}
++
++	hidden_old_dentry = dtohd2(old_dentry);
++	hidden_new_dentry = dtohd2(new_dentry);
++
++	dget(hidden_old_dentry);
++	dget(hidden_new_dentry);
++
++	/* was: hidden_dir_dentry = lock_parent(hidden_new_dentry); */
++	hidden_dir_dentry = dget(hidden_new_dentry->d_parent);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = vfs_link(hidden_old_dentry,
++		       hidden_dir_dentry->d_inode,
++		       hidden_new_dentry);
++	if (err || !hidden_new_dentry->d_inode)
++		goto out_lock;
++
++	dtost(new_dentry) = CREATED;
++ 	err = mini_fo_tri_interpose(NULL, hidden_new_dentry, new_dentry, dir->i_sb, 0);
++	if (err)
++		goto out_lock;
++
++	fist_copy_attr_timesizes(dir, hidden_new_dentry->d_inode);
++	/* propagate number of hard-links */
++	old_dentry->d_inode->i_nlink = itohi2(old_dentry->d_inode)->i_nlink;
++
++ out_lock:
++	/* was: unlock_dir(hidden_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_dir_dentry);
++
++	dput(hidden_new_dentry);
++	dput(hidden_old_dentry);
++	if (!new_dentry->d_inode)
++		d_drop(new_dentry);
++
++ out:
++	return err;
++}
++
++
++STATIC int
++mini_fo_unlink(inode_t *dir, dentry_t *dentry)
++{
++	int err = 0;
++
++	dget(dentry);
++	if(dtopd(dentry)->state == MODIFIED) {
++		err = nondir_mod_to_del(dentry);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == UNMODIFIED) {
++		err = nondir_unmod_to_del(dentry);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == CREATED) {
++		err = nondir_creat_to_del(dentry);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == DEL_REWRITTEN) {
++		err = nondir_del_rew_to_del(dentry);
++		goto out;
++	}
++
++	printk(KERN_CRIT "mini_fo_unlink: ERROR, invalid state detected.\n");
++
++ out:
++	fist_copy_attr_times(dir, itohi2(dentry->d_parent->d_inode));
++
++	if(!err) {
++		/* is this causing my pain? d_delete(dentry); */
++		d_drop(dentry);
++	}
++
++	dput(dentry);
++	return err;
++}
++
++
++STATIC int
++mini_fo_symlink(inode_t *dir, dentry_t *dentry, const char *symname)
++{
++	int err=0;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++        umode_t mode;
++#endif
++
++	/* Fail if the symlink file exists */
++	if(!(dtost(dentry) == DELETED ||
++	     dtost(dentry) == NON_EXISTANT)) {
++		err = -EEXIST;
++		goto out;
++	}
++
++	err = get_neg_sto_dentry(dentry);
++	if(err) {
++		err = -EINVAL;
++		goto out;
++	}
++	hidden_sto_dentry = dtohd2(dentry);
++
++	dget(hidden_sto_dentry);
++	/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	mode = S_IALLUGO;
++	err = vfs_symlink(hidden_sto_dir_dentry->d_inode,
++			  hidden_sto_dentry, symname, mode);
++#else
++	err = vfs_symlink(hidden_sto_dir_dentry->d_inode,
++			  hidden_sto_dentry,
++			  symname);
++#endif
++	if (err || !hidden_sto_dentry->d_inode)
++                goto out_lock;
++
++        if(dtost(dentry) == DELETED) {
++                dtost(dentry) = DEL_REWRITTEN;
++                err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0);
++                if(err)
++                        goto out_lock;
++        } else if(dtost(dentry) == NON_EXISTANT) {
++                dtost(dentry) = CREATED;
++                err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0);
++                if(err)
++                        goto out_lock;
++        }
++	fist_copy_attr_timesizes(dir, hidden_sto_dir_dentry->d_inode);
++
++ out_lock:
++        /* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++
++        dput(hidden_sto_dentry);
++        if (!dentry->d_inode)
++                d_drop(dentry);
++ out:
++        return err;
++}
++
++STATIC int
++mini_fo_mkdir(inode_t *dir, dentry_t *dentry, int mode)
++{
++	int err;
++
++	err = create_sto_dir(dentry, mode);
++
++	check_mini_fo_dentry(dentry);
++
++	return err;
++}
++
++
++STATIC int
++mini_fo_rmdir(inode_t *dir, dentry_t *dentry)
++{
++	int err = 0;
++
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++	dentry_t *meta_dentry;
++	inode_t *hidden_sto_dir = NULL;
++
++	check_mini_fo_dentry(dentry);
++	check_mini_fo_inode(dir);
++
++	dget(dentry);
++	if(dtopd(dentry)->state == MODIFIED) {
++		/* XXX: disabled, because it does not bother to check files on
++		 * the original filesystem - just a hack, but better than simply
++		 * removing it without testing */
++		err = -EINVAL;
++		goto out;
++
++		hidden_sto_dir = itohi2(dir);
++		hidden_sto_dentry = dtohd2(dentry);
++
++		/* was:hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++		hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++		/* Delete an old WOL file contained in the storage dir */
++		meta_dentry = lookup_one_len(META_FILENAME,
++					     hidden_sto_dentry,
++					     strlen(META_FILENAME));
++		if(meta_dentry->d_inode) {
++			err = vfs_unlink(hidden_sto_dentry->d_inode, meta_dentry);
++			dput(meta_dentry);
++			if(!err)
++				d_delete(meta_dentry);
++		}
++
++		err = vfs_rmdir(hidden_sto_dir, hidden_sto_dentry);
++		dput(hidden_sto_dentry);
++		if(!err)
++			d_delete(hidden_sto_dentry);
++
++		/* propagate number of hard-links */
++		dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++
++		dput(dtohd(dentry));
++
++		dtohd(dentry) = NULL;
++		dtopd(dentry)->state = DELETED;
++
++		/* carefull with R files */
++		if( __meta_is_r_entry(dir,
++				      dentry->d_name.name,
++				      dentry->d_name.len) == 1) {
++			err = meta_remove_r_entry(dentry->d_parent,
++						  dentry->d_name.name,
++						  dentry->d_name.len);
++			if(err) {
++				printk(KERN_CRIT "mini_fo: rmdir: meta_remove_r_entry failed.\n");
++				goto out;
++			}
++		}
++		else {
++			/* ok, add deleted file to META */
++			meta_add_d_entry(dentry->d_parent,
++					 dentry->d_name.name,
++					 dentry->d_name.len);
++		}
++		/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++		dput(hidden_sto_dir_dentry);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == UNMODIFIED) {
++		/* XXX: simply adding it to the delete list here is fscking dangerous!
++		 * as a temporary hack, i will disable rmdir on unmodified directories
++		 * for now.
++		 */
++		err = -EINVAL;
++		goto out;
++
++		err = get_neg_sto_dentry(dentry);
++		if(err) {
++			err = -EINVAL;
++			goto out;
++		}
++
++		/* dput base dentry, this will relase the inode and free the
++		 * dentry, as we will never need it again. */
++		dput(dtohd(dentry));
++		dtohd(dentry) = NULL;
++		dtopd(dentry)->state = DELETED;
++
++		/* add deleted file to META-file */
++		meta_add_d_entry(dentry->d_parent,
++				 dentry->d_name.name,
++				 dentry->d_name.len);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == CREATED) {
++		hidden_sto_dir = itohi2(dir);
++		hidden_sto_dentry = dtohd2(dentry);
++
++		/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry);*/
++		hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++		/* Delete an old WOL file contained in the storage dir */
++		meta_dentry = lookup_one_len(META_FILENAME,
++					     hidden_sto_dentry,
++					     strlen(META_FILENAME));
++		if(meta_dentry->d_inode) {
++			/* is this necessary? dget(meta_dentry); */
++			err = vfs_unlink(hidden_sto_dentry->d_inode,
++					 meta_dentry);
++			dput(meta_dentry);
++			if(!err)
++				d_delete(meta_dentry);
++		}
++
++		err = vfs_rmdir(hidden_sto_dir, hidden_sto_dentry);
++		dput(hidden_sto_dentry);
++		if(!err)
++			d_delete(hidden_sto_dentry);
++
++		/* propagate number of hard-links */
++		dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++		dtopd(dentry)->state = NON_EXISTANT;
++
++		/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++		dput(hidden_sto_dir_dentry);
++
++		goto out;
++	}
++	else if(dtopd(dentry)->state == DEL_REWRITTEN) {
++		hidden_sto_dir = itohi2(dir);
++		hidden_sto_dentry = dtohd2(dentry);
++
++		/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry);*/
++		hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++		/* Delete an old WOL file contained in the storage dir */
++		meta_dentry = lookup_one_len(META_FILENAME,
++					     hidden_sto_dentry,
++					     strlen(META_FILENAME));
++		if(meta_dentry->d_inode) {
++			/* is this necessary? dget(meta_dentry); */
++			err = vfs_unlink(hidden_sto_dentry->d_inode,
++					 meta_dentry);
++			dput(meta_dentry);
++			if(!err)
++				d_delete(meta_dentry);
++		}
++
++		err = vfs_rmdir(hidden_sto_dir, hidden_sto_dentry);
++		dput(hidden_sto_dentry);
++		if(!err)
++			d_delete(hidden_sto_dentry);
++
++		/* propagate number of hard-links */
++		dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++		dtopd(dentry)->state = DELETED;
++		/* was: unlock_dir(hidden_sto_dir_dentry); */
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++		dput(hidden_sto_dir_dentry);
++		goto out;
++	}
++
++	printk(KERN_CRIT "mini_fo_rmdir: ERROR, invalid state detected.\n");
++
++ out:
++	if(!err) {
++		d_drop(dentry);
++	}
++
++	fist_copy_attr_times(dir, itohi2(dentry->d_parent->d_inode));
++	dput(dentry);
++
++	return err;
++}
++
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_mknod(inode_t *dir, dentry_t *dentry, int mode, dev_t dev)
++#else
++mini_fo_mknod(inode_t *dir, dentry_t *dentry, int mode, int dev)
++#endif
++{
++	int err = 0;
++
++	check_mini_fo_dentry(dentry);
++
++	err = create_sto_nod(dentry, mode, dev);
++	if(err) {
++		printk(KERN_CRIT "mini_fo_mknod: creating sto nod failed.\n");
++		err = -EINVAL;
++	}
++
++	check_mini_fo_dentry(dentry);
++	return err;
++}
++
++
++STATIC int
++mini_fo_rename(inode_t *old_dir, dentry_t *old_dentry,
++	       inode_t *new_dir, dentry_t *new_dentry)
++{
++	/* dispatch */
++	if(S_ISDIR(old_dentry->d_inode->i_mode))
++		return rename_directory(old_dir, old_dentry, new_dir, new_dentry);
++	return rename_nondir(old_dir, old_dentry, new_dir, new_dentry);
++
++}
++
++int rename_directory(inode_t *old_dir, dentry_t *old_dentry,
++		     inode_t *new_dir, dentry_t *new_dentry)
++{
++	int err, bpath_len;
++	char *bpath;
++
++	dentry_t *hidden_old_dentry;
++	dentry_t *hidden_new_dentry;
++	dentry_t *hidden_old_dir_dentry;
++	dentry_t *hidden_new_dir_dentry;
++
++	err = 0;
++	bpath = NULL;
++	bpath_len = 0;
++
++	/* this is a test, chuck out if it works */
++	if(!(dtopd(new_dentry)->state == DELETED ||
++	     dtopd(new_dentry)->state == NON_EXISTANT)) {
++		printk(KERN_CRIT "mini_fo: rename_directory: \
++                                  uh, ah, new_dentry not negative.\n");
++		/* return -1; */
++	}
++
++	/* state = UNMODIFIED */
++	if(dtopd(old_dentry)->state == UNMODIFIED) {
++		err = dir_unmod_to_mod(old_dentry);
++		if (err)
++			goto out;
++	}
++
++	/* state = MODIFIED */
++	if(dtopd(old_dentry)->state == MODIFIED) {
++		bpath = meta_check_r_entry(old_dentry->d_parent,
++					   old_dentry->d_name.name,
++					   old_dentry->d_name.len);
++		if(bpath) {
++			err = meta_remove_r_entry(old_dentry->d_parent,
++						  old_dentry->d_name.name,
++						  old_dentry->d_name.len);
++			if(err) {
++				printk(KERN_CRIT "mini_fo: rename_directory:\
++                                                   meta_remove_r_entry \
++                                                  failed.\n");
++				goto out;
++			}
++			err = meta_add_r_entry(new_dentry->d_parent,
++					       bpath,
++					       strlen(bpath),
++					       new_dentry->d_name.name,
++					       new_dentry->d_name.len);
++			kfree(bpath);
++		}
++		else {/* wol it */
++			err = meta_add_d_entry(old_dentry->d_parent,
++					       old_dentry->d_name.name,
++					       old_dentry->d_name.len);
++			if (err)
++				goto out;
++			/* put it on rename list */
++			err = get_mini_fo_bpath(old_dentry,
++						&bpath,
++						&bpath_len);
++			if (err)
++				goto out;
++			err = meta_add_r_entry(new_dentry->d_parent,
++					       bpath, bpath_len,
++					       new_dentry->d_name.name,
++					       new_dentry->d_name.len);
++			if (err)
++				goto out;
++		}
++		/* no state change, MODIFIED stays MODIFIED */
++	}
++	/* state = CREATED */
++	if(dtopd(old_dentry)->state == CREATED ||
++	   dtopd(old_dentry)->state == DEL_REWRITTEN) {
++		if(dtohd(old_dentry))
++			dput(dtohd(old_dentry));
++
++		if(dtopd(new_dentry)->state == DELETED) {
++			dtopd(old_dentry)->state = DEL_REWRITTEN;
++			dtohd(old_dentry) = NULL;
++		}
++		else if(dtopd(new_dentry)->state == NON_EXISTANT) {
++			dtopd(old_dentry)->state = CREATED;
++			/* steal new dentry's neg. base dentry */
++			dtohd(old_dentry) = dtohd(new_dentry);
++			dtohd(new_dentry) = NULL;
++		}
++	}
++	if(dtopd(new_dentry)->state == UNMODIFIED ||
++	   dtopd(new_dentry)->state == NON_EXISTANT) {
++		err = get_neg_sto_dentry(new_dentry);
++		if(err)
++			goto out;
++	}
++
++	/* now move sto file */
++	hidden_old_dentry = dtohd2(old_dentry);
++	hidden_new_dentry = dtohd2(new_dentry);
++
++	dget(hidden_old_dentry);
++	dget(hidden_new_dentry);
++
++	hidden_old_dir_dentry = dget(hidden_old_dentry->d_parent);
++	hidden_new_dir_dentry = dget(hidden_new_dentry->d_parent);
++	double_lock(hidden_old_dir_dentry, hidden_new_dir_dentry);
++
++	err = vfs_rename(hidden_old_dir_dentry->d_inode, hidden_old_dentry,
++			 hidden_new_dir_dentry->d_inode, hidden_new_dentry);
++	if(err)
++		goto out_lock;
++
++	fist_copy_attr_all(new_dir, hidden_new_dir_dentry->d_inode);
++	if (new_dir != old_dir)
++		fist_copy_attr_all(old_dir,
++				   hidden_old_dir_dentry->d_inode);
++
++ out_lock:
++	/* double_unlock will dput the new/old parent dentries
++	 * whose refcnts were incremented via get_parent above. */
++	double_unlock(hidden_old_dir_dentry, hidden_new_dir_dentry);
++	dput(hidden_new_dentry);
++	dput(hidden_old_dentry);
++
++ out:
++	return err;
++}
++
++int rename_nondir(inode_t *old_dir, dentry_t *old_dentry,
++		  inode_t *new_dir, dentry_t *new_dentry)
++{
++	int err=0;
++
++	check_mini_fo_dentry(old_dentry);
++	check_mini_fo_dentry(new_dentry);
++	check_mini_fo_inode(old_dir);
++	check_mini_fo_inode(new_dir);
++
++	/* state: UNMODIFIED */
++	if(dtost(old_dentry) == UNMODIFIED) {
++		err = nondir_unmod_to_mod(old_dentry, 1);
++		if(err) {
++			err = -EINVAL;
++			goto out;
++		}
++	}
++
++	/* the easy states */
++	if(exists_in_storage(old_dentry)) {
++
++		dentry_t *hidden_old_dentry;
++		dentry_t *hidden_new_dentry;
++		dentry_t *hidden_old_dir_dentry;
++		dentry_t *hidden_new_dir_dentry;
++
++		/* if old file is MODIFIED, add it to the deleted_list */
++		if(dtopd(old_dentry)->state == MODIFIED) {
++			meta_add_d_entry(old_dentry->d_parent,
++					 old_dentry->d_name.name,
++					 old_dentry->d_name.len);
++
++			dput(dtohd(old_dentry));
++		}
++		/* if old file is CREATED, we only release the base dentry */
++		if(dtopd(old_dentry)->state == CREATED) {
++			if(dtohd(old_dentry))
++				dput(dtohd(old_dentry));
++		}
++
++		/* now setup the new states (depends on new_dentry state) */
++		/* new dentry state =  MODIFIED */
++		if(dtopd(new_dentry)->state == MODIFIED) {
++			meta_add_d_entry(new_dentry->d_parent,
++					 new_dentry->d_name.name,
++					 new_dentry->d_name.len);
++
++			/* new dentry will be d_put'ed later by the vfs
++			 * so don't do it here
++			 * dput(dtohd(new_dentry));
++			 */
++			dtohd(old_dentry) = NULL;
++			dtopd(old_dentry)->state = DEL_REWRITTEN;
++		}
++		/* new dentry state =  UNMODIFIED */
++		else if(dtopd(new_dentry)->state == UNMODIFIED) {
++			if(get_neg_sto_dentry(new_dentry))
++				return -EINVAL;
++
++			meta_add_d_entry(new_dentry->d_parent,
++					 new_dentry->d_name.name,
++					 new_dentry->d_name.len);
++
++			/* is this right??? */
++			/*dput(dtohd(new_dentry));*/
++			dtohd(old_dentry) = NULL;
++			dtopd(old_dentry)->state = DEL_REWRITTEN;
++		}
++		/* new dentry state =  CREATED */
++		else if(dtopd(new_dentry)->state == CREATED) {
++			/* we keep the neg. base dentry (if exists) */
++			dtohd(old_dentry) = dtohd(new_dentry);
++			/* ...and set it to Null, or we'll get
++			 * dcache.c:345 if it gets dput twice... */
++			dtohd(new_dentry) = NULL;
++			dtopd(old_dentry)->state = CREATED;
++		}
++		/* new dentry state =  NON_EXISTANT */
++		else if(dtopd(new_dentry)->state == NON_EXISTANT) {
++			if(get_neg_sto_dentry(new_dentry))
++				return -EINVAL;
++
++			/* we keep the neg. base dentry (if exists) */
++			dtohd(old_dentry) = dtohd(new_dentry);
++			/* ...and set it to Null, or we'll get
++			 * Dr. dcache.c:345 if it gets dput twice... */
++			dtohd(new_dentry) = NULL;
++			dtopd(old_dentry)->state = CREATED;
++		}
++		/* new dentry state =  DEL_REWRITTEN or DELETED */
++		else if(dtopd(new_dentry)->state == DEL_REWRITTEN ||
++			dtopd(new_dentry)->state == DELETED) {
++			dtohd(old_dentry) = NULL;
++			dtopd(old_dentry)->state = DEL_REWRITTEN;
++		}
++		else { /* not possible, uhh, ahh */
++			printk(KERN_CRIT
++			       "mini_fo: rename_reg_file: invalid state detected [1].\n");
++			return -1;
++		}
++
++		/* now we definitely have a sto file */
++		hidden_old_dentry = dtohd2(old_dentry);
++		hidden_new_dentry = dtohd2(new_dentry);
++
++		dget(hidden_old_dentry);
++		dget(hidden_new_dentry);
++
++		hidden_old_dir_dentry = dget(hidden_old_dentry->d_parent);
++		hidden_new_dir_dentry = dget(hidden_new_dentry->d_parent);
++		double_lock(hidden_old_dir_dentry, hidden_new_dir_dentry);
++
++		err = vfs_rename(hidden_old_dir_dentry->d_inode,
++				 hidden_old_dentry,
++				 hidden_new_dir_dentry->d_inode,
++				 hidden_new_dentry);
++		if(err)
++			goto out_lock;
++
++		fist_copy_attr_all(new_dir, hidden_new_dir_dentry->d_inode);
++		if (new_dir != old_dir)
++			fist_copy_attr_all(old_dir, hidden_old_dir_dentry->d_inode);
++
++	out_lock:
++		/* double_unlock will dput the new/old parent dentries
++		 * whose refcnts were incremented via get_parent above.
++		 */
++		double_unlock(hidden_old_dir_dentry, hidden_new_dir_dentry);
++		dput(hidden_new_dentry);
++		dput(hidden_old_dentry);
++	out:
++		return err;
++	}
++	else { /* invalid state */
++		printk(KERN_CRIT "mini_fo: rename_reg_file: ERROR: invalid state detected [2].\n");
++		return -1;
++	}
++}
++
++
++STATIC int
++mini_fo_readlink(dentry_t *dentry, char *buf, int bufsiz)
++{
++	int err=0;
++	dentry_t *hidden_dentry = NULL;
++
++	if(dtohd2(dentry) && dtohd2(dentry)->d_inode) {
++		hidden_dentry = dtohd2(dentry);
++	} else if(dtohd(dentry) && dtohd(dentry)->d_inode) {
++		hidden_dentry = dtohd(dentry);
++	} else {
++		goto out;
++	}
++
++	if (!hidden_dentry->d_inode->i_op ||
++	    !hidden_dentry->d_inode->i_op->readlink) {
++		err = -EINVAL;		goto out;
++	}
++
++	err = hidden_dentry->d_inode->i_op->readlink(hidden_dentry,
++						     buf,
++						     bufsiz);
++	if (err > 0)
++		fist_copy_attr_atime(dentry->d_inode, hidden_dentry->d_inode);
++
++ out:
++	return err;
++}
++
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
++static int mini_fo_follow_link(dentry_t *dentry, struct nameidata *nd)
++#else
++static void* mini_fo_follow_link(dentry_t *dentry, struct nameidata *nd)
++#endif
++{
++	char *buf;
++	int len = PAGE_SIZE, err;
++	mm_segment_t old_fs;
++
++	/* in 2.6 this is freed by mini_fo_put_link called by __do_follow_link */
++	buf = kmalloc(len, GFP_KERNEL);
++	if (!buf) {
++		err = -ENOMEM;
++		goto out;
++	}
++
++	/* read the symlink, and then we will follow it */
++	old_fs = get_fs();
++	set_fs(KERNEL_DS);
++	err = dentry->d_inode->i_op->readlink(dentry, buf, len);
++	set_fs(old_fs);
++	if (err < 0) {
++		kfree(buf);
++		buf = NULL;
++		goto out;
++	}
++	buf[err] = 0;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++        nd_set_link(nd, buf);
++        err = 0;
++#else
++	err = vfs_follow_link(nd, buf);
++#endif
++
++ out:
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	kfree(buf);
++#endif
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
++        return err;
++#else
++        return ERR_PTR(err);
++#endif
++}
++
++STATIC
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
++void mini_fo_put_link(struct dentry *dentry, struct nameidata *nd)
++#else
++void mini_fo_put_link(struct dentry *dentry, struct nameidata *nd, void *cookie)
++#endif
++{
++        char *link;
++        link = nd_get_link(nd);
++        kfree(link);
++}
++#endif
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_permission(inode_t *inode, int mask, struct nameidata *nd)
++#else
++mini_fo_permission(inode_t *inode, int mask)
++#endif
++{
++	inode_t *hidden_inode;
++	int mode;
++	int err;
++
++	if(itohi2(inode)) {
++		hidden_inode = itohi2(inode);
++	} else {
++		hidden_inode = itohi(inode);
++	}
++	mode = inode->i_mode;
++
++	/* not really needed, as permission handles everything:
++	 *	err = vfs_permission(inode, mask);
++	 *	if (err)
++	 *		goto out;
++	 */
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	err = permission(hidden_inode, mask, nd);
++#else
++	err = permission(hidden_inode, mask);
++#endif
++
++	/*  out: */
++	return err;
++}
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++STATIC int
++mini_fo_inode_revalidate(dentry_t *dentry)
++{
++	int err = 0;
++	dentry_t *hidden_dentry;
++	inode_t *hidden_inode;
++
++	ASSERT(dentry->d_inode);
++	ASSERT(itopd(dentry->d_inode));
++
++	if(itohi2(dentry->d_inode)) {
++                hidden_dentry = dtohd2(dentry);
++		hidden_inode = hidden_dentry->d_inode;
++	} else if(itohi(dentry->d_inode)) {
++                hidden_dentry = dtohd(dentry);
++		hidden_inode = hidden_dentry->d_inode;
++	} else {
++                printk(KERN_CRIT "mini_fo_inode_revalidate: ERROR, invalid state detected.\n");
++                err = -ENOENT;
++                goto out;
++        }
++	if (hidden_inode && hidden_inode->i_op && hidden_inode->i_op->revalidate){
++		err = hidden_inode->i_op->revalidate(hidden_dentry);
++		if (err)
++			goto out;
++	}
++	fist_copy_attr_all(dentry->d_inode, hidden_inode);
++ out:
++	return err;
++}
++#endif
++
++STATIC int
++mini_fo_setattr(dentry_t *dentry, struct iattr *ia)
++{
++	int err = 0;
++
++	check_mini_fo_dentry(dentry);
++
++	if(!is_mini_fo_existant(dentry)) {
++		printk(KERN_CRIT "mini_fo_setattr: ERROR, invalid state detected [1].\n");
++		goto out;
++	}
++
++	if(dtost(dentry) == UNMODIFIED) {
++		if(!IS_COPY_FLAG(ia->ia_valid))
++			goto out; /* we ignore these changes to base */
++
++		if(S_ISDIR(dentry->d_inode->i_mode)) {
++			err = dir_unmod_to_mod(dentry);
++		} else {
++			/* we copy contents if file is not beeing truncated */
++			if(S_ISREG(dentry->d_inode->i_mode) &&
++			   !(ia->ia_size == 0 && (ia->ia_valid & ATTR_SIZE))) {
++				err = nondir_unmod_to_mod(dentry, 1);
++			} else
++				err = nondir_unmod_to_mod(dentry, 0);
++		}
++		if(err) {
++			err = -EINVAL;
++			printk(KERN_CRIT "mini_fo_setattr: ERROR changing states.\n");
++			goto out;
++		}
++	}
++	if(!exists_in_storage(dentry)) {
++		printk(KERN_CRIT "mini_fo_setattr: ERROR, invalid state detected [2].\n");
++		err = -EINVAL;
++		goto out;
++	}
++	ASSERT(dentry->d_inode);
++	ASSERT(dtohd2(dentry));
++	ASSERT(itopd(dentry->d_inode));
++	ASSERT(itohi2(dentry->d_inode));
++
++	err = notify_change(dtohd2(dentry), ia);
++	fist_copy_attr_all(dentry->d_inode, itohi2(dentry->d_inode));
++ out:
++	return err;
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++STATIC int
++mini_fo_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat)
++{
++	int err = 0;
++        dentry_t *hidden_dentry;
++
++	ASSERT(dentry->d_inode);
++	ASSERT(itopd(dentry->d_inode));
++
++	if(itohi2(dentry->d_inode)) {
++                hidden_dentry = dtohd2(dentry);
++	} else if(itohi(dentry->d_inode)) {
++                hidden_dentry = dtohd(dentry);
++	} else {
++                printk(KERN_CRIT "mini_fo_getattr: ERROR, invalid state detected.\n");
++                err = -ENOENT;
++                goto out;
++        }
++	fist_copy_attr_all(dentry->d_inode, hidden_dentry->d_inode);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	generic_fillattr(dentry->d_inode, stat);
++	if (!stat->blksize) {
++		struct super_block *s = hidden_dentry->d_inode->i_sb;
++		unsigned blocks;
++		blocks = (stat->size+s->s_blocksize-1) >> s->s_blocksize_bits;
++		stat->blocks = (s->s_blocksize / 512) * blocks;
++		stat->blksize = s->s_blocksize;
++	}
++ out:
++        return err;
++}
++#endif
++
++#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20))
++#if 0 /* no xattr_alloc() and xattr_free() */
++/* This is lifted from fs/xattr.c */
++static void *
++xattr_alloc(size_t size, size_t limit)
++{
++	void *ptr;
++
++	if (size > limit)
++		return ERR_PTR(-E2BIG);
++
++	if (!size)	/* size request, no buffer is needed */
++		return NULL;
++	else if (size <= PAGE_SIZE)
++		ptr = kmalloc((unsigned long) size, GFP_KERNEL);
++	else
++		ptr = vmalloc((unsigned long) size);
++	if (!ptr)
++		return ERR_PTR(-ENOMEM);
++	return ptr;
++}
++
++static void
++xattr_free(void *ptr, size_t size)
++{
++	if (!size)	/* size request, no buffer was needed */
++		return;
++	else if (size <= PAGE_SIZE)
++		kfree(ptr);
++	else
++		vfree(ptr);
++}
++#endif /* no xattr_alloc() and xattr_free() */
++
++/* BKL held by caller.
++ * dentry->d_inode->i_sem down
++ */
++STATIC int
++mini_fo_getxattr(struct dentry *dentry, const char *name, void *value, size_t size) {
++	struct dentry *hidden_dentry = NULL;
++	int err = -EOPNOTSUPP;
++	/* Define these anyway so we don't need as much ifdef'ed code. */
++	char *encoded_name = NULL;
++	char *encoded_value = NULL;
++
++	check_mini_fo_dentry(dentry);
++
++	if(exists_in_storage(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else
++		hidden_dentry = dtohd(dentry);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	if (hidden_dentry->d_inode->i_op->getxattr) {
++		encoded_name = (char *)name;
++		encoded_value = (char *)value;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_dentry->d_inode->i_sem);
++#endif
++		/* lock_kernel() already done by caller. */
++		err = hidden_dentry->d_inode->i_op->getxattr(hidden_dentry, encoded_name, encoded_value, size);
++		/* unlock_kernel() will be done by caller. */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_dentry->d_inode->i_sem);
++#endif
++	}
++	return err;
++}
++
++/* BKL held by caller.
++ * dentry->d_inode->i_sem down
++ */
++STATIC int
++#if ((LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,21) \
++     && LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,23)) \
++     || LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
++mini_fo_setxattr(struct dentry *dentry, const char *name,
++		 const void *value, size_t size, int flags)
++#else
++mini_fo_setxattr(struct dentry *dentry, const char *name,
++		 void *value, size_t size, int flags)
++#endif
++
++{
++	struct dentry *hidden_dentry = NULL;
++	int err = -EOPNOTSUPP;
++
++	/* Define these anyway, so we don't have as much ifdef'ed code. */
++	char *encoded_value = NULL;
++	char *encoded_name = NULL;
++
++	check_mini_fo_dentry(dentry);
++
++	if(exists_in_storage(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else
++		hidden_dentry = dtohd(dentry);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	if (hidden_dentry->d_inode->i_op->setxattr) {
++		encoded_name = (char *)name;
++		encoded_value = (char *)value;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_dentry->d_inode->i_sem);
++#endif
++		/* lock_kernel() already done by caller. */
++		err = hidden_dentry->d_inode->i_op->setxattr(hidden_dentry, encoded_name, encoded_value, size, flags);
++		/* unlock_kernel() will be done by caller. */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_dentry->d_inode->i_sem);
++#endif
++	}
++	return err;
++}
++
++/* BKL held by caller.
++ * dentry->d_inode->i_sem down
++ */
++STATIC int
++mini_fo_removexattr(struct dentry *dentry, const char *name) {
++	struct dentry *hidden_dentry = NULL;
++	int err = -EOPNOTSUPP;
++	char *encoded_name;
++
++	check_mini_fo_dentry(dentry);
++
++	if(exists_in_storage(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else
++		hidden_dentry = dtohd(dentry);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	if (hidden_dentry->d_inode->i_op->removexattr) {
++		encoded_name = (char *)name;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_dentry->d_inode->i_sem);
++#endif
++		/* lock_kernel() already done by caller. */
++		err = hidden_dentry->d_inode->i_op->removexattr(hidden_dentry, encoded_name);
++		/* unlock_kernel() will be done by caller. */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_dentry->d_inode->i_sem);
++#endif
++	}
++	return err;
++}
++
++/* BKL held by caller.
++ * dentry->d_inode->i_sem down
++ */
++STATIC int
++mini_fo_listxattr(struct dentry *dentry, char *list, size_t size) {
++	struct dentry *hidden_dentry = NULL;
++	int err = -EOPNOTSUPP;
++	char *encoded_list = NULL;
++
++	check_mini_fo_dentry(dentry);
++
++	if(exists_in_storage(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else
++		hidden_dentry = dtohd(dentry);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	if (hidden_dentry->d_inode->i_op->listxattr) {
++		encoded_list = list;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_dentry->d_inode->i_sem);
++#endif
++		/* lock_kernel() already done by caller. */
++		err = hidden_dentry->d_inode->i_op->listxattr(hidden_dentry, encoded_list, size);
++		/* unlock_kernel() will be done by caller. */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_dentry->d_inode->i_sem);
++#endif
++	}
++	return err;
++}
++# endif /* defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20)) */
++
++struct inode_operations mini_fo_symlink_iops =
++	{
++		readlink:	mini_fo_readlink,
++		follow_link: mini_fo_follow_link,
++		/* mk: permission:	mini_fo_permission, */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++		revalidate:	mini_fo_inode_revalidate,
++#endif
++		setattr:	mini_fo_setattr,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		getattr:	mini_fo_getattr,
++		put_link:       mini_fo_put_link,
++#endif
++
++#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20))
++		setxattr:	mini_fo_setxattr,
++		getxattr:	mini_fo_getxattr,
++		listxattr:	mini_fo_listxattr,
++		removexattr: mini_fo_removexattr
++# endif /* defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20)) */
++	};
++
++struct inode_operations mini_fo_dir_iops =
++	{
++		create:	mini_fo_create,
++		lookup:	mini_fo_lookup,
++		link:	mini_fo_link,
++		unlink:	mini_fo_unlink,
++		symlink:	mini_fo_symlink,
++		mkdir:	mini_fo_mkdir,
++		rmdir:	mini_fo_rmdir,
++		mknod:	mini_fo_mknod,
++		rename:	mini_fo_rename,
++		/* no readlink/follow_link for non-symlinks */
++		// off because we have setattr
++		//    truncate:	mini_fo_truncate,
++		/* mk:permission:	mini_fo_permission, */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++		revalidate:	mini_fo_inode_revalidate,
++#endif
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		getattr:	mini_fo_getattr,
++#endif
++		setattr:	mini_fo_setattr,
++#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20))
++		setxattr:	mini_fo_setxattr,
++		getxattr:	mini_fo_getxattr,
++		listxattr:	mini_fo_listxattr,
++		removexattr: mini_fo_removexattr
++# endif /* XATTR && LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20) */
++	};
++
++struct inode_operations mini_fo_main_iops =
++	{
++		/* permission:	mini_fo_permission, */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++		revalidate:	mini_fo_inode_revalidate,
++#endif
++		setattr:	mini_fo_setattr,
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		getattr:	mini_fo_getattr,
++#endif
++#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20))
++		setxattr:	mini_fo_setxattr,
++		getxattr:	mini_fo_getxattr,
++		listxattr:	mini_fo_listxattr,
++		removexattr:    mini_fo_removexattr
++# endif /* XATTR && LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20) */
++	};
+--- /dev/null
++++ b/fs/mini_fo/main.c
+@@ -0,0 +1,423 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++#include <linux/module.h>
++
++/* This definition must only appear after we include <linux/module.h> */
++#ifndef MODULE_LICENSE
++# define MODULE_LICENSE(bison)
++#endif /* not MODULE_LICENSE */
++
++/*
++ * This is the mini_fo tri interpose function, which extends the
++ * functionality of the regular interpose by interposing a higher
++ * level inode on top of two lower level ones: the base filesystem
++ * inode and the storage filesystem inode.
++ *
++ *  sb we pass is mini_fo's super_block
++ */
++int
++mini_fo_tri_interpose(dentry_t *hidden_dentry,
++		      dentry_t *hidden_sto_dentry,
++		      dentry_t *dentry, super_block_t *sb, int flag)
++{
++	inode_t *hidden_inode = NULL;
++	inode_t *hidden_sto_inode = NULL; /* store corresponding storage inode */
++	int err = 0;
++	inode_t *inode;
++
++	/* Pointer to hidden_sto_inode if exists, else to hidden_inode.
++	 * This is used to copy the attributes of the correct inode. */
++	inode_t *master_inode;
++
++	if(hidden_dentry)
++		hidden_inode = hidden_dentry->d_inode;
++	if(hidden_sto_dentry)
++		hidden_sto_inode = hidden_sto_dentry->d_inode;
++
++	ASSERT(dentry->d_inode == NULL);
++
++	/* mk: One of the inodes associated with the dentrys is likely to
++	 * be NULL, so carefull:
++	 */
++	ASSERT((hidden_inode != NULL) || (hidden_sto_inode != NULL));
++
++	if(hidden_sto_inode)
++		master_inode = hidden_sto_inode;
++	else
++		master_inode = hidden_inode;
++
++	/*
++	 * We allocate our new inode below, by calling iget.
++	 * iget will call our read_inode which will initialize some
++	 * of the new inode's fields
++	 */
++
++	/*
++	 * original: inode = iget(sb, hidden_inode->i_ino);
++	 */
++	inode = iget(sb, iunique(sb, 25));
++	if (!inode) {
++		err = -EACCES;		/* should be impossible??? */
++		goto out;
++	}
++
++	/*
++	 * interpose the inode if not already interposed
++	 *   this is possible if the inode is being reused
++	 * XXX: what happens if we get_empty_inode() but there's another already?
++	 * for now, ASSERT() that this can't happen; fix later.
++	 */
++	if (itohi(inode) != NULL) {
++		printk(KERN_CRIT "mini_fo_tri_interpose: itohi(inode) != NULL.\n");
++	}
++	if (itohi2(inode) != NULL) {
++		printk(KERN_CRIT "mini_fo_tri_interpose: itohi2(inode) != NULL.\n");
++	}
++
++	/* mk: Carefull, igrab can't handle NULL inodes (ok, why should it?), so
++	 * we need to check here:
++	 */
++	if(hidden_inode)
++		itohi(inode) = igrab(hidden_inode);
++	else
++		itohi(inode) = NULL;
++
++	if(hidden_sto_inode)
++		itohi2(inode) = igrab(hidden_sto_inode);
++	else
++		itohi2(inode) = NULL;
++
++
++	/* Use different set of inode ops for symlinks & directories*/
++	if (S_ISLNK(master_inode->i_mode))
++		inode->i_op = &mini_fo_symlink_iops;
++	else if (S_ISDIR(master_inode->i_mode))
++		inode->i_op = &mini_fo_dir_iops;
++
++	/* Use different set of file ops for directories */
++	if (S_ISDIR(master_inode->i_mode))
++		inode->i_fop = &mini_fo_dir_fops;
++
++	/* properly initialize special inodes */
++	if (S_ISBLK(master_inode->i_mode) || S_ISCHR(master_inode->i_mode) ||
++	    S_ISFIFO(master_inode->i_mode) || S_ISSOCK(master_inode->i_mode)) {
++		init_special_inode(inode, master_inode->i_mode, master_inode->i_rdev);
++	}
++
++	/* Fix our inode's address operations to that of the lower inode */
++	if (inode->i_mapping->a_ops != master_inode->i_mapping->a_ops) {
++		inode->i_mapping->a_ops = master_inode->i_mapping->a_ops;
++	}
++
++	/* only (our) lookup wants to do a d_add */
++	if (flag)
++		d_add(dentry, inode);
++	else
++		d_instantiate(dentry, inode);
++
++	ASSERT(dtopd(dentry) != NULL);
++
++	/* all well, copy inode attributes */
++	fist_copy_attr_all(inode, master_inode);
++
++ out:
++	return err;
++}
++
++/* parse mount options "base=" and "sto=" */
++dentry_t *
++mini_fo_parse_options(super_block_t *sb, char *options)
++{
++	dentry_t *hidden_root = ERR_PTR(-EINVAL);
++	dentry_t *hidden_root2 = ERR_PTR(-EINVAL);
++	struct nameidata nd, nd2;
++	char *name, *tmp, *end;
++	int err = 0;
++
++	/* We don't want to go off the end of our arguments later on. */
++	for (end = options; *end; end++);
++
++	while (options < end) {
++		tmp = options;
++		while (*tmp && *tmp != ',')
++			tmp++;
++		*tmp = '\0';
++		if (!strncmp("base=", options, 5)) {
++			name = options + 5;
++			printk(KERN_INFO "mini_fo: using base directory: %s\n", name);
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++			if (path_init(name, LOOKUP_FOLLOW, &nd))
++				err = path_walk(name, &nd);
++#else
++			err = path_lookup(name, LOOKUP_FOLLOW, &nd);
++#endif
++			if (err) {
++				printk(KERN_CRIT "mini_fo: error accessing hidden directory '%s'\n", name);
++				hidden_root = ERR_PTR(err);
++				goto out;
++			}
++			hidden_root = nd.dentry;
++			stopd(sb)->base_dir_dentry = nd.dentry;
++			stopd(sb)->hidden_mnt = nd.mnt;
++
++		} else if(!strncmp("sto=", options, 4)) {
++			/* parse the storage dir */
++			name = options + 4;
++			printk(KERN_INFO "mini_fo: using storage directory: %s\n", name);
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++			if(path_init(name, LOOKUP_FOLLOW, &nd2))
++				err = path_walk(name, &nd2);
++#else
++                        err = path_lookup(name, LOOKUP_FOLLOW, &nd2);
++#endif
++			if(err) {
++				printk(KERN_CRIT "mini_fo: error accessing hidden storage directory '%s'\n", name);
++
++				hidden_root2 = ERR_PTR(err);
++				goto out;
++			}
++			hidden_root2 = nd2.dentry;
++			stopd(sb)->storage_dir_dentry = nd2.dentry;
++			stopd(sb)->hidden_mnt2 = nd2.mnt;
++			stohs2(sb) = hidden_root2->d_sb;
++
++			/* validate storage dir, this is done in
++			 * mini_fo_read_super for the base directory.
++			 */
++			if (IS_ERR(hidden_root2)) {
++				printk(KERN_WARNING "mini_fo_parse_options: storage dentry lookup failed (err = %ld)\n", PTR_ERR(hidden_root2));
++				goto out;
++			}
++			if (!hidden_root2->d_inode) {
++				printk(KERN_WARNING "mini_fo_parse_options: no storage dir to interpose on.\n");
++				goto out;
++			}
++			stohs2(sb) = hidden_root2->d_sb;
++		} else {
++			printk(KERN_WARNING "mini_fo: unrecognized option '%s'\n", options);
++			hidden_root = ERR_PTR(-EINVAL);
++			goto out;
++		}
++		options = tmp + 1;
++	}
++
++ out:
++	if(IS_ERR(hidden_root2))
++		return hidden_root2;
++	return hidden_root;
++}
++
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++static int
++#else
++super_block_t *
++#endif
++mini_fo_read_super(super_block_t *sb, void *raw_data, int silent)
++{
++	dentry_t *hidden_root;
++	int err = 0;
++
++	if (!raw_data) {
++		printk(KERN_WARNING "mini_fo_read_super: missing argument\n");
++		err = -EINVAL;
++		goto out;
++	}
++	/*
++	 * Allocate superblock private data
++	 */
++	__stopd(sb) = kmalloc(sizeof(struct mini_fo_sb_info), GFP_KERNEL);
++	if (!stopd(sb)) {
++		printk(KERN_WARNING "%s: out of memory\n", __FUNCTION__);
++		err = -ENOMEM;
++		goto out;
++	}
++	stohs(sb) = NULL;
++
++	hidden_root = mini_fo_parse_options(sb, raw_data);
++	if (IS_ERR(hidden_root)) {
++		printk(KERN_WARNING "mini_fo_read_super: lookup_dentry failed (err = %ld)\n", PTR_ERR(hidden_root));
++		err = PTR_ERR(hidden_root);
++		goto out_free;
++	}
++	if (!hidden_root->d_inode) {
++		printk(KERN_WARNING "mini_fo_read_super: no directory to interpose on\n");
++		goto out_free;
++	}
++	stohs(sb) = hidden_root->d_sb;
++
++	/*
++	 * Linux 2.4.2-ac3 and beyond has code in
++	 * mm/filemap.c:generic_file_write() that requires sb->s_maxbytes
++	 * to be populated.  If not set, all write()s under that sb will
++	 * return 0.
++	 *
++	 * Linux 2.4.4+ automatically sets s_maxbytes to MAX_NON_LFS;
++	 * the filesystem should override it only if it supports LFS.
++	 */
++	/* non-SCA code is good to go with LFS */
++	sb->s_maxbytes = hidden_root->d_sb->s_maxbytes;
++
++	sb->s_op = &mini_fo_sops;
++	/*
++	 * we can't use d_alloc_root if we want to use
++	 * our own interpose function unchanged,
++	 * so we simply replicate *most* of the code in d_alloc_root here
++	 */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	sb->s_root = d_alloc(NULL, &(const struct qstr) { "/", 1, 0 });
++#else
++	sb->s_root = d_alloc(NULL, &(const struct qstr){hash: 0, name: "/", len : 1});
++#endif
++	if (IS_ERR(sb->s_root)) {
++		printk(KERN_WARNING "mini_fo_read_super: d_alloc failed\n");
++		err = -ENOMEM;
++		goto out_dput;
++	}
++
++	sb->s_root->d_op = &mini_fo_dops;
++	sb->s_root->d_sb = sb;
++	sb->s_root->d_parent = sb->s_root;
++
++	/* link the upper and lower dentries */
++	__dtopd(sb->s_root) = (struct mini_fo_dentry_info *)
++		kmalloc(sizeof(struct mini_fo_dentry_info), GFP_KERNEL);
++	if (!dtopd(sb->s_root)) {
++		err = -ENOMEM;
++		goto out_dput2;
++	}
++	dtopd(sb->s_root)->state = MODIFIED;
++	dtohd(sb->s_root) = hidden_root;
++
++	/* fanout relevant, interpose on storage root dentry too */
++	dtohd2(sb->s_root) = stopd(sb)->storage_dir_dentry;
++
++	/* ...and call tri-interpose to interpose root dir inodes
++	 * if (mini_fo_interpose(hidden_root, sb->s_root, sb, 0))
++	 */
++	if(mini_fo_tri_interpose(hidden_root, dtohd2(sb->s_root), sb->s_root, sb, 0))
++		goto out_dput2;
++
++	/* initalize the wol list */
++	itopd(sb->s_root->d_inode)->deleted_list_size = -1;
++	itopd(sb->s_root->d_inode)->renamed_list_size = -1;
++	meta_build_lists(sb->s_root);
++
++	goto out;
++
++ out_dput2:
++	dput(sb->s_root);
++ out_dput:
++	dput(hidden_root);
++	dput(dtohd2(sb->s_root)); /* release the hidden_sto_dentry too */
++ out_free:
++	kfree(stopd(sb));
++	__stopd(sb) = NULL;
++ out:
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++        return err;
++#else
++        if (err) {
++		return ERR_PTR(err);
++        } else {
++		return sb;
++        }
++#endif
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++static int mini_fo_get_sb(struct file_system_type *fs_type,
++					  int flags, const char *dev_name,
++					  void *raw_data, struct vfsmount *mnt)
++{
++	return get_sb_nodev(fs_type, flags, raw_data, mini_fo_read_super, mnt);
++}
++#else
++static struct super_block *mini_fo_get_sb(struct file_system_type *fs_type,
++					  int flags, const char *dev_name,
++					  void *raw_data)
++{
++	return get_sb_nodev(fs_type, flags, raw_data, mini_fo_read_super);
++}
++#endif
++
++void mini_fo_kill_block_super(struct super_block *sb)
++{
++	generic_shutdown_super(sb);
++	/*
++	 *      XXX: BUG: Halcrow: Things get unstable sometime after this point:
++	 *      lib/rwsem-spinlock.c:127: spin_is_locked on uninitialized
++	 *      fs/fs-writeback.c:402: spin_lock(fs/super.c:a0381828) already
++	 *      locked by fs/fs-writeback.c/402
++	 *
++	 *      Apparently, someone's not releasing a lock on sb_lock...
++	 */
++}
++
++static struct file_system_type mini_fo_fs_type = {
++	.owner          = THIS_MODULE,
++	.name           = "mini_fo",
++	.get_sb         = mini_fo_get_sb,
++	.kill_sb        = mini_fo_kill_block_super,
++	.fs_flags       = 0,
++};
++
++
++#else
++static DECLARE_FSTYPE(mini_fo_fs_type, "mini_fo", mini_fo_read_super, 0);
++#endif
++
++static int __init init_mini_fo_fs(void)
++{
++	printk("Registering mini_fo version $Id$\n");
++	return register_filesystem(&mini_fo_fs_type);
++}
++static void __exit exit_mini_fo_fs(void)
++{
++	printk("Unregistering mini_fo version $Id$\n");
++	unregister_filesystem(&mini_fo_fs_type);
++}
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++EXPORT_NO_SYMBOLS;
++#endif
++
++MODULE_AUTHOR("Erez Zadok <ezk@cs.sunysb.edu>");
++MODULE_DESCRIPTION("FiST-generated mini_fo filesystem");
++MODULE_LICENSE("GPL");
++
++/* MODULE_PARM(fist_debug_var, "i"); */
++/* MODULE_PARM_DESC(fist_debug_var, "Debug level"); */
++
++module_init(init_mini_fo_fs)
++module_exit(exit_mini_fo_fs)
+--- /dev/null
++++ b/fs/mini_fo/Makefile
+@@ -0,0 +1,17 @@
++#
++# Makefile for mini_fo 2.4 and 2.6 Linux kernels
++#
++# Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License
++# as published by the Free Software Foundation; either version
++# 2 of the License, or (at your option) any later version.
++#
++
++obj-$(CONFIG_MINI_FO) := mini_fo.o
++mini_fo-objs   := meta.o dentry.o file.o inode.o main.o super.o state.o aux.o
++
++# dependencies
++${mini_fo-objs}: mini_fo.h fist.h
++
+--- /dev/null
++++ b/fs/mini_fo/meta.c
+@@ -0,0 +1,1000 @@
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif /* HAVE_CONFIG_H */
++#include "fist.h"
++#include "mini_fo.h"
++
++int meta_build_lists(dentry_t *dentry)
++{
++	struct mini_fo_inode_info *inode_info;
++
++	dentry_t *meta_dentry = 0;
++	file_t *meta_file = 0;
++	mm_segment_t old_fs;
++	void *buf;
++
++	int bytes, len;
++	struct vfsmount *meta_mnt;
++	char *entry;
++
++	inode_info = itopd(dentry->d_inode);
++	if(!(inode_info->deleted_list_size == -1 &&
++	     inode_info->renamed_list_size == -1)) {
++		printk(KERN_CRIT "mini_fo: meta_build_lists: \
++                                  Error, list(s) not virgin.\n");
++		return -1;
++	}
++
++	/* init our meta lists */
++	INIT_LIST_HEAD(&inode_info->deleted_list);
++	inode_info->deleted_list_size = 0;
++
++	INIT_LIST_HEAD(&inode_info->renamed_list);
++	inode_info->renamed_list_size = 0;
++
++  	/* might there be a META-file? */
++	if(dtohd2(dentry) && dtohd2(dentry)->d_inode) {
++		meta_dentry = lookup_one_len(META_FILENAME,
++					     dtohd2(dentry),
++					     strlen(META_FILENAME));
++		if(!meta_dentry->d_inode) {
++			dput(meta_dentry);
++			goto out_ok;
++		}
++		/* $%& err, is this correct? */
++		meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++		mntget(meta_mnt);
++
++
++		/* open META-file for reading */
++		meta_file = dentry_open(meta_dentry, meta_mnt, 0x0);
++		if(!meta_file || IS_ERR(meta_file)) {
++			printk(KERN_CRIT "mini_fo: meta_build_lists: \
++                                          ERROR opening META file.\n");
++			goto out_err;
++		}
++
++		/* check if fs supports reading */
++		if(!meta_file->f_op->read) {
++			printk(KERN_CRIT "mini_fo: meta_build_lists: \
++                                          ERROR, fs does not support reading.\n");
++			goto out_err_close;
++		}
++
++		/* allocate a page for transfering the data */
++		buf = (void *) __get_free_page(GFP_KERNEL);
++		if(!buf) {
++			printk(KERN_CRIT "mini_fo: meta_build_lists: \
++                                          ERROR, out of mem.\n");
++			goto out_err_close;
++		}
++		meta_file->f_pos = 0;
++		old_fs = get_fs();
++		set_fs(KERNEL_DS);
++		do {
++			char *c;
++			bytes = meta_file->f_op->read(meta_file, buf, PAGE_SIZE, &meta_file->f_pos);
++			if(bytes == PAGE_SIZE) {
++				/* trim a cut off filename and adjust f_pos to get it next time */
++				for(c = (char*) buf+PAGE_SIZE;
++				    *c != '\n';
++				    c--, bytes--, meta_file->f_pos--);
++			}
++			entry = (char *) buf;
++			while(entry < (char *) buf+bytes) {
++
++				char *old_path;
++				char *dir_name;
++				int old_len, new_len;
++
++				/* len without '\n'*/
++				len = (int) (strchr(entry, '\n') - entry);
++				switch (*entry) {
++				case 'D':
++					/* format: "D filename" */
++					meta_list_add_d_entry(dentry,
++							      entry+2,
++							      len-2);
++					break;
++				case 'R':
++					/* format: "R path/xy/dir newDir" */
++					old_path = entry+2;
++					dir_name = strchr(old_path, ' ') + 1;
++					old_len =  dir_name - old_path - 1;
++					new_len = ((int) entry) + len - ((int ) dir_name);
++					meta_list_add_r_entry(dentry,
++							      old_path,
++							      old_len,
++							      dir_name,
++							      new_len);
++					break;
++				default:
++					/* unknown entry type detected */
++					break;
++				}
++				entry += len+1;
++			}
++
++		} while(meta_file->f_pos < meta_dentry->d_inode->i_size);
++
++		free_page((unsigned long) buf);
++		set_fs(old_fs);
++		fput(meta_file);
++	}
++	goto out_ok;
++
++ out_err_close:
++	fput(meta_file);
++ out_err:
++	mntput(meta_mnt);
++	dput(meta_dentry);
++	return -1;
++ out_ok:
++	return 1; /* check this!!! inode_info->wol_size; */
++}
++
++/* cleanups up all lists and free's the mem by dentry */
++int meta_put_lists(dentry_t *dentry)
++{
++	if(!dentry || !dentry->d_inode) {
++		printk("mini_fo: meta_put_lists: invalid dentry passed.\n");
++		return -1;
++	}
++	return __meta_put_lists(dentry->d_inode);
++}
++
++/* cleanups up all lists and free's the mem by inode */
++int __meta_put_lists(inode_t *inode)
++{
++	int err = 0;
++	if(!inode || !itopd(inode)) {
++		printk("mini_fo: __meta_put_lists: invalid inode passed.\n");
++		return -1;
++	}
++	err = __meta_put_d_list(inode);
++	err |= __meta_put_r_list(inode);
++	return err;
++}
++
++int meta_sync_lists(dentry_t *dentry)
++{
++	int err = 0;
++	if(!dentry || !dentry->d_inode) {
++		printk("mini_fo: meta_sync_lists: \
++                        invalid dentry passed.\n");
++		return -1;
++	}
++	err = meta_sync_d_list(dentry, 0);
++	err |= meta_sync_r_list(dentry, 1);
++	return err;
++}
++
++
++/* remove all D entries from the renamed list and free the mem */
++int __meta_put_d_list(inode_t *inode)
++{
++	struct list_head *tmp;
++        struct deleted_entry *del_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode)) {
++		printk(KERN_CRIT "mini_fo: __meta_put_d_list: \
++                                  invalid inode passed.\n");
++		return -1;
++	}
++	inode_info = itopd(inode);
++
++        /* nuke the DELETED-list */
++        if(inode_info->deleted_list_size <= 0)
++		return 0;
++
++	while(!list_empty(&inode_info->deleted_list)) {
++		tmp = inode_info->deleted_list.next;
++		list_del(tmp);
++		del_entry = list_entry(tmp, struct deleted_entry, list);
++		kfree(del_entry->name);
++		kfree(del_entry);
++	}
++	inode_info->deleted_list_size = 0;
++
++	return 0;
++}
++
++/* remove all R entries from the renamed list and free the mem */
++int __meta_put_r_list(inode_t *inode)
++{
++	struct list_head *tmp;
++	struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode)) {
++		printk(KERN_CRIT "mini_fo: meta_put_r_list: invalid inode.\n");
++		return -1;
++	}
++	inode_info = itopd(inode);
++
++        /* nuke the RENAMED-list */
++        if(inode_info->renamed_list_size <= 0)
++		return 0;
++
++	while(!list_empty(&inode_info->renamed_list)) {
++		tmp = inode_info->renamed_list.next;
++		list_del(tmp);
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		kfree(ren_entry->new_name);
++		kfree(ren_entry->old_name);
++		kfree(ren_entry);
++	}
++	inode_info->renamed_list_size = 0;
++
++	return 0;
++}
++
++int meta_add_d_entry(dentry_t *dentry, const char *name, int len)
++{
++	int err = 0;
++	err = meta_list_add_d_entry(dentry, name, len);
++	err |= meta_write_d_entry(dentry,name,len);
++	return err;
++}
++
++/* add a D entry to the deleted list */
++int meta_list_add_d_entry(dentry_t *dentry, const char *name, int len)
++{
++        struct deleted_entry *del_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_list_add_d_entry: \
++                                  invalid dentry passed.\n");
++		return -1;
++	}
++	inode_info = itopd(dentry->d_inode);
++
++        if(inode_info->deleted_list_size < 0)
++                return -1;
++
++        del_entry = (struct deleted_entry *)
++		kmalloc(sizeof(struct deleted_entry), GFP_KERNEL);
++        del_entry->name = (char*) kmalloc(len, GFP_KERNEL);
++        if(!del_entry || !del_entry->name) {
++                printk(KERN_CRIT "mini_fo: meta_list_add_d_entry: \
++                                  out of mem.\n");
++		kfree(del_entry->name);
++		kfree(del_entry);
++                return -ENOMEM;
++        }
++
++        strncpy(del_entry->name, name, len);
++        del_entry->len = len;
++
++        list_add(&del_entry->list, &inode_info->deleted_list);
++        inode_info->deleted_list_size++;
++        return 0;
++}
++
++int meta_add_r_entry(dentry_t *dentry,
++			  const char *old_name, int old_len,
++			  const char *new_name, int new_len)
++{
++	int err = 0;
++	err = meta_list_add_r_entry(dentry,
++				    old_name, old_len,
++				    new_name, new_len);
++	err |= meta_write_r_entry(dentry,
++				  old_name, old_len,
++				  new_name, new_len);
++	return err;
++}
++
++/* add a R entry to the renamed list */
++int meta_list_add_r_entry(dentry_t *dentry,
++			  const char *old_name, int old_len,
++			  const char *new_name, int new_len)
++{
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_list_add_r_entry: \
++                                  invalid dentry passed.\n");
++		return -1;
++	}
++	inode_info = itopd(dentry->d_inode);
++
++        if(inode_info->renamed_list_size < 0)
++                return -1;
++
++        ren_entry = (struct renamed_entry *)
++		kmalloc(sizeof(struct renamed_entry), GFP_KERNEL);
++        ren_entry->old_name = (char*) kmalloc(old_len, GFP_KERNEL);
++        ren_entry->new_name = (char*) kmalloc(new_len, GFP_KERNEL);
++
++        if(!ren_entry || !ren_entry->old_name || !ren_entry->new_name) {
++                printk(KERN_CRIT "mini_fo: meta_list_add_r_entry: \
++                                  out of mem.\n");
++		kfree(ren_entry->new_name);
++		kfree(ren_entry->old_name);
++		kfree(ren_entry);
++                return -ENOMEM;
++        }
++
++        strncpy(ren_entry->old_name, old_name, old_len);
++        ren_entry->old_len = old_len;
++        strncpy(ren_entry->new_name, new_name, new_len);
++        ren_entry->new_len = new_len;
++
++        list_add(&ren_entry->list, &inode_info->renamed_list);
++        inode_info->renamed_list_size++;
++        return 0;
++}
++
++
++int meta_remove_r_entry(dentry_t *dentry, const char *name, int len)
++{
++	int err = 0;
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT
++		       "mini_fo: meta_remove_r_entry: \
++                        invalid dentry passed.\n");
++		return -1;
++	}
++
++	err = meta_list_remove_r_entry(dentry, name, len);
++	err |= meta_sync_lists(dentry);
++	return err;
++}
++
++int meta_list_remove_r_entry(dentry_t *dentry, const char *name, int len)
++{
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT
++		       "mini_fo: meta_list_remove_r_entry: \
++                        invalid dentry passed.\n");
++		return -1;
++	}
++	return __meta_list_remove_r_entry(dentry->d_inode, name, len);
++}
++
++int __meta_list_remove_r_entry(inode_t *inode, const char *name, int len)
++{
++	struct list_head *tmp;
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode))
++		printk(KERN_CRIT
++		       "mini_fo: __meta_list_remove_r_entry: \
++                        invalid inode passed.\n");
++	inode_info = itopd(inode);
++
++        if(inode_info->renamed_list_size < 0)
++                return -1;
++        if(inode_info->renamed_list_size == 0)
++                return 1;
++
++	list_for_each(tmp, &inode_info->renamed_list) {
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		if(ren_entry->new_len != len)
++			continue;
++
++		if(!strncmp(ren_entry->new_name, name, len)) {
++			list_del(tmp);
++			kfree(ren_entry->new_name);
++			kfree(ren_entry->old_name);
++			kfree(ren_entry);
++			inode_info->renamed_list_size--;
++			return 0;
++		}
++	}
++	return 1;
++}
++
++
++/* append a single D entry to the meta file */
++int meta_write_d_entry(dentry_t *dentry, const char *name, int len)
++{
++	dentry_t *meta_dentry = 0;
++        file_t *meta_file = 0;
++        mm_segment_t old_fs;
++
++        int bytes, err;
++        struct vfsmount *meta_mnt = 0;
++        char *buf;
++
++	err = 0;
++
++	if(itopd(dentry->d_inode)->deleted_list_size < 0) {
++		err = -1;
++		goto out;
++	}
++
++	if(dtopd(dentry)->state == UNMODIFIED) {
++                err = build_sto_structure(dentry->d_parent, dentry);
++                if(err) {
++                        printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                          build_sto_structure failed.\n");
++			goto out;
++                }
++        }
++	meta_dentry = lookup_one_len(META_FILENAME,
++				     dtohd2(dentry), strlen (META_FILENAME));
++
++	/* We need to create a META-file */
++        if(!meta_dentry->d_inode) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry,
++			   S_IRUSR | S_IWUSR,
++			   NULL);
++#else
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry,
++			   S_IRUSR | S_IWUSR);
++#endif
++	}
++        /* open META-file for writing */
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        if(!meta_file || IS_ERR(meta_file)) {
++                printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                  ERROR opening meta file.\n");
++                mntput(meta_mnt); /* $%& is this necessary? */
++                dput(meta_dentry);
++		err = -1;
++                goto out;
++        }
++
++        /* check if fs supports writing */
++        if(!meta_file->f_op->write) {
++                printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                  ERROR, fs does not support writing.\n");
++                goto out_err_close;
++        }
++
++	meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */
++        old_fs = get_fs();
++        set_fs(KERNEL_DS);
++
++	/* size: len for name, 1 for \n and 2 for "D " */
++	buf = (char *) kmalloc(len+3, GFP_KERNEL);
++	if (!buf) {
++		printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                  out of mem.\n");
++		return -ENOMEM;
++	}
++
++	buf[0] = 'D';
++	buf[1] = ' ';
++	strncpy(buf+2, name, len);
++	buf[len+2] = '\n';
++	bytes = meta_file->f_op->write(meta_file, buf, len+3,
++				       &meta_file->f_pos);
++	if(bytes != len+3) {
++		printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                  ERROR writing.\n");
++		err = -1;
++	}
++	kfree(buf);
++	set_fs(old_fs);
++
++ out_err_close:
++	fput(meta_file);
++ out:
++	return err;
++}
++
++/* append a single R entry to the meta file */
++int meta_write_r_entry(dentry_t *dentry,
++		       const char *old_name, int old_len,
++		       const char *new_name, int new_len)
++{
++	dentry_t *meta_dentry = 0;
++        file_t *meta_file = 0;
++        mm_segment_t old_fs;
++
++        int bytes, err, buf_len;
++	struct vfsmount *meta_mnt = 0;
++        char *buf;
++
++
++	err = 0;
++
++	if(itopd(dentry->d_inode)->renamed_list_size < 0) {
++		err = -1;
++		goto out;
++	}
++
++	/* build the storage structure? */
++	if(dtopd(dentry)->state == UNMODIFIED) {
++                err = build_sto_structure(dentry->d_parent, dentry);
++                if(err) {
++                        printk(KERN_CRIT "mini_fo: meta_write_r_entry: \
++                                          build_sto_structure failed.\n");
++			goto out;
++                }
++        }
++	meta_dentry = lookup_one_len(META_FILENAME,
++				     dtohd2(dentry),
++				     strlen (META_FILENAME));
++        if(!meta_dentry->d_inode) {
++                /* We need to create a META-file */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR, NULL);
++#else
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR);
++#endif
++	}
++        /* open META-file for writing */
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        if(!meta_file || IS_ERR(meta_file)) {
++                printk(KERN_CRIT "mini_fo: meta_write_r_entry: \
++                                  ERROR opening meta file.\n");
++                mntput(meta_mnt);
++                dput(meta_dentry);
++		err = -1;
++                goto out;
++        }
++
++        /* check if fs supports writing */
++        if(!meta_file->f_op->write) {
++                printk(KERN_CRIT "mini_fo: meta_write_r_entry: \
++                                  ERROR, fs does not support writing.\n");
++                goto out_err_close;
++        }
++
++	meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */
++        old_fs = get_fs();
++        set_fs(KERNEL_DS);
++
++	/* size: 2 for "R ", old_len+new_len for names, 1 blank+1 \n */
++	buf_len = old_len + new_len + 4;
++	buf = (char *) kmalloc(buf_len, GFP_KERNEL);
++	if (!buf) {
++		printk(KERN_CRIT "mini_fo: meta_write_r_entry: out of mem.\n");
++		return -ENOMEM;
++	}
++
++	buf[0] = 'R';
++	buf[1] = ' ';
++	strncpy(buf + 2, old_name, old_len);
++	buf[old_len + 2] = ' ';
++	strncpy(buf + old_len + 3, new_name, new_len);
++	buf[buf_len -1] = '\n';
++	bytes = meta_file->f_op->write(meta_file, buf, buf_len, &meta_file->f_pos);
++	if(bytes != buf_len) {
++		printk(KERN_CRIT "mini_fo: meta_write_r_entry: ERROR writing.\n");
++		err = -1;
++	}
++
++	kfree(buf);
++	set_fs(old_fs);
++
++ out_err_close:
++	fput(meta_file);
++ out:
++	return err;
++}
++
++/* sync D list to disk, append data if app_flag is 1 */
++/* check the meta_mnt, which seems not to be used (properly)  */
++
++int meta_sync_d_list(dentry_t *dentry, int app_flag)
++{
++	dentry_t *meta_dentry;
++        file_t *meta_file;
++        mm_segment_t old_fs;
++
++        int bytes, err;
++        struct vfsmount *meta_mnt;
++        char *buf;
++
++	struct list_head *tmp;
++        struct deleted_entry *del_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	err = 0;
++	meta_file=0;
++	meta_mnt=0;
++
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                  invalid inode passed.\n");
++		err = -1;
++		goto out;
++	}
++	inode_info = itopd(dentry->d_inode);
++
++        if(inode_info->deleted_list_size < 0) {
++		err = -1;
++		goto out;
++	}
++
++	/* ok, there is something to sync */
++
++	/* build the storage structure? */
++        if(!dtohd2(dentry) && !itohi2(dentry->d_inode)) {
++                err = build_sto_structure(dentry->d_parent, dentry);
++                if(err) {
++                        printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                          build_sto_structure failed.\n");
++			goto out;
++                }
++        }
++	meta_dentry = lookup_one_len(META_FILENAME,
++				     dtohd2(dentry),
++				     strlen(META_FILENAME));
++        if(!meta_dentry->d_inode) {
++                /* We need to create a META-file */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR, NULL);
++#else
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR);
++#endif
++		app_flag = 0;
++	}
++	/* need we truncate the meta file? */
++	if(!app_flag) {
++		struct iattr newattrs;
++                newattrs.ia_size = 0;
++                newattrs.ia_valid = ATTR_SIZE | ATTR_CTIME;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&meta_dentry->d_inode->i_mutex);
++#else
++                down(&meta_dentry->d_inode->i_sem);
++#endif
++                err = notify_change(meta_dentry, &newattrs);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&meta_dentry->d_inode->i_mutex);
++#else
++                up(&meta_dentry->d_inode->i_sem);
++#endif
++
++                if(err || meta_dentry->d_inode->i_size != 0) {
++                        printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                          ERROR truncating meta file.\n");
++                        goto out_err_close;
++		}
++	}
++
++        /* open META-file for writing */
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        if(!meta_file || IS_ERR(meta_file)) {
++                printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                  ERROR opening meta file.\n");
++		/* we don't mntget so we dont't mntput (for now)
++		 * mntput(meta_mnt);
++		 */
++		dput(meta_dentry);
++		err = -1;
++                goto out;
++        }
++
++        /* check if fs supports writing */
++        if(!meta_file->f_op->write) {
++                printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                  ERROR, fs does not support writing.\n");
++                goto out_err_close;
++        }
++
++	meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */
++        old_fs = get_fs();
++        set_fs(KERNEL_DS);
++
++	/* here we go... */
++        list_for_each(tmp, &inode_info->deleted_list) {
++		del_entry = list_entry(tmp, struct deleted_entry, list);
++
++		/* size: len for name, 1 for \n and 2 for "D " */
++		buf = (char *) kmalloc(del_entry->len+3, GFP_KERNEL);
++		if (!buf) {
++			printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                          out of mem.\n");
++			return -ENOMEM;
++		}
++
++		buf[0] = 'D';
++		buf[1] = ' ';
++		strncpy(buf+2, del_entry->name, del_entry->len);
++		buf[del_entry->len+2] = '\n';
++		bytes = meta_file->f_op->write(meta_file, buf,
++					       del_entry->len+3,
++					       &meta_file->f_pos);
++		if(bytes != del_entry->len+3) {
++			printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                          ERROR writing.\n");
++			err |= -1;
++		}
++		kfree(buf);
++	}
++	set_fs(old_fs);
++
++ out_err_close:
++	fput(meta_file);
++ out:
++	return err;
++
++}
++
++int meta_sync_r_list(dentry_t *dentry, int app_flag)
++{
++	dentry_t *meta_dentry;
++        file_t *meta_file;
++        mm_segment_t old_fs;
++
++        int bytes, err, buf_len;
++        struct vfsmount *meta_mnt;
++        char *buf;
++
++	struct list_head *tmp;
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	err = 0;
++	meta_file=0;
++	meta_mnt=0;
++
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                  invalid dentry passed.\n");
++		err = -1;
++		goto out;
++	}
++	inode_info = itopd(dentry->d_inode);
++
++        if(inode_info->deleted_list_size < 0) {
++		err = -1;
++		goto out;
++	}
++
++	/* ok, there is something to sync */
++
++	/* build the storage structure? */
++        if(!dtohd2(dentry) && !itohi2(dentry->d_inode)) {
++                err = build_sto_structure(dentry->d_parent, dentry);
++                if(err) {
++                        printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                          build_sto_structure failed.\n");
++			goto out;
++                }
++        }
++	meta_dentry = lookup_one_len(META_FILENAME,
++				     dtohd2(dentry),
++				     strlen(META_FILENAME));
++        if(!meta_dentry->d_inode) {
++                /* We need to create a META-file */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR, NULL);
++#else
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR);
++#endif
++		app_flag = 0;
++	}
++	/* need we truncate the meta file? */
++	if(!app_flag) {
++		struct iattr newattrs;
++                newattrs.ia_size = 0;
++                newattrs.ia_valid = ATTR_SIZE | ATTR_CTIME;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&meta_dentry->d_inode->i_mutex);
++#else
++                down(&meta_dentry->d_inode->i_sem);
++#endif
++                err = notify_change(meta_dentry, &newattrs);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&meta_dentry->d_inode->i_mutex);
++#else
++                up(&meta_dentry->d_inode->i_sem);
++#endif
++                if(err || meta_dentry->d_inode->i_size != 0) {
++                        printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                          ERROR truncating meta file.\n");
++                        goto out_err_close;
++		}
++	}
++
++        /* open META-file for writing */
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        if(!meta_file || IS_ERR(meta_file)) {
++                printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                  ERROR opening meta file.\n");
++		/* we don't mntget so we dont't mntput (for now)
++		 * mntput(meta_mnt);
++		 */
++		dput(meta_dentry);
++		err = -1;
++                goto out;
++        }
++
++        /* check if fs supports writing */
++        if(!meta_file->f_op->write) {
++                printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                  ERROR, fs does not support writing.\n");
++                goto out_err_close;
++        }
++
++	meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */
++        old_fs = get_fs();
++        set_fs(KERNEL_DS);
++
++	/* here we go... */
++        list_for_each(tmp, &inode_info->renamed_list) {
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		/* size:
++		 * 2 for "R ", old_len+new_len for names, 1 blank+1 \n */
++		buf_len = ren_entry->old_len + ren_entry->new_len + 4;
++		buf = (char *) kmalloc(buf_len, GFP_KERNEL);
++		if (!buf) {
++			printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                          out of mem.\n");
++			return -ENOMEM;
++		}
++		buf[0] = 'R';
++		buf[1] = ' ';
++		strncpy(buf + 2, ren_entry->old_name, ren_entry->old_len);
++		buf[ren_entry->old_len + 2] = ' ';
++		strncpy(buf + ren_entry->old_len + 3,
++			ren_entry->new_name, ren_entry->new_len);
++		buf[buf_len - 1] = '\n';
++		bytes = meta_file->f_op->write(meta_file, buf,
++					       buf_len, &meta_file->f_pos);
++		if(bytes != buf_len) {
++			printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                          ERROR writing.\n");
++			err |= -1;
++		}
++		kfree(buf);
++	}
++	set_fs(old_fs);
++
++ out_err_close:
++	fput(meta_file);
++ out:
++	return err;
++}
++
++int meta_check_d_entry(dentry_t *dentry, const char *name, int len)
++{
++	if(!dentry || !dentry->d_inode)
++		printk(KERN_CRIT "mini_fo: meta_check_d_dentry: \
++                                  invalid dentry passed.\n");
++	return __meta_check_d_entry(dentry->d_inode, name, len);
++}
++
++int __meta_check_d_entry(inode_t *inode, const char *name, int len)
++{
++	struct list_head *tmp;
++        struct deleted_entry *del_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode))
++		printk(KERN_CRIT "mini_fo: __meta_check_d_dentry: \
++                                  invalid inode passed.\n");
++
++        inode_info = itopd(inode);
++
++        if(inode_info->deleted_list_size <= 0)
++                return 0;
++
++        list_for_each(tmp, &inode_info->deleted_list) {
++		del_entry = list_entry(tmp, struct deleted_entry, list);
++		if(del_entry->len != len)
++			continue;
++
++		if(!strncmp(del_entry->name, name, len))
++			return 1;
++	}
++	return 0;
++}
++
++/*
++ * check if file has been renamed and return path to orig. base dir.
++ * Implements no error return values so far, what of course sucks.
++ * String is null terminated.'
++ */
++char* meta_check_r_entry(dentry_t *dentry, const char *name, int len)
++{
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_check_r_dentry: \
++                                  invalid dentry passed.\n");
++		return NULL;
++	}
++	return __meta_check_r_entry(dentry->d_inode, name, len);
++}
++
++char* __meta_check_r_entry(inode_t *inode, const char *name, int len)
++{
++	struct list_head *tmp;
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++	char *old_path;
++
++	if(!inode || !itopd(inode)) {
++		printk(KERN_CRIT "mini_fo: meta_check_r_dentry: \
++                                  invalid inode passed.\n");
++		return NULL;
++	}
++	inode_info = itopd(inode);
++
++        if(inode_info->renamed_list_size <= 0)
++                return NULL;
++
++        list_for_each(tmp, &inode_info->renamed_list) {
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		if(ren_entry->new_len != len)
++			continue;
++
++		if(!strncmp(ren_entry->new_name, name, len)) {
++			old_path = (char *)
++				kmalloc(ren_entry->old_len+1, GFP_KERNEL);
++			strncpy(old_path,
++				ren_entry->old_name,
++				ren_entry->old_len);
++			old_path[ren_entry->old_len]='\0';
++			return old_path;
++		}
++	}
++	return NULL;
++}
++
++/*
++ * This version only checks if entry exists and return:
++ *     1 if exists,
++ *     0 if not,
++ *    -1 if error.
++ */
++int meta_is_r_entry(dentry_t *dentry, const char *name, int len)
++{
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_check_r_dentry [2]: \
++                                  invalid dentry passed.\n");
++		return -1;
++	}
++	return __meta_is_r_entry(dentry->d_inode, name, len);
++}
++
++int __meta_is_r_entry(inode_t *inode, const char *name, int len)
++{
++	struct list_head *tmp;
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode)) {
++		printk(KERN_CRIT "mini_fo: meta_check_r_dentry [2]: \
++                                  invalid inode passed.\n");
++		return -1;
++	}
++	inode_info = itopd(inode);
++
++        if(inode_info->renamed_list_size <= 0)
++                return -1;
++
++        list_for_each(tmp, &inode_info->renamed_list) {
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		if(ren_entry->new_len != len)
++			continue;
++
++		if(!strncmp(ren_entry->new_name, name, len))
++			return 1;
++	}
++	return 0;
++}
++
+--- /dev/null
++++ b/fs/mini_fo/mini_fo.h
+@@ -0,0 +1,510 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifndef __MINI_FO_H_
++#define __MINI_FO_H_
++
++#ifdef __KERNEL__
++
++/* META stuff */
++#define META_FILENAME "META_dAfFgHE39ktF3HD2sr"
++
++/* use xattrs? */
++#define XATTR
++
++/* File attributes that when changed, result in a file beeing copied to storage */
++#define COPY_FLAGS ATTR_MODE | ATTR_UID | ATTR_GID | ATTR_SIZE
++
++/*
++ * mini_fo filestates
++ */
++#define MODIFIED       1
++#define UNMODIFIED     2
++#define CREATED        3
++#define DEL_REWRITTEN  4
++#define DELETED        5
++#define NON_EXISTANT   6
++
++/* fist file systems superblock magic */
++# define MINI_FO_SUPER_MAGIC 0xf15f
++
++/*
++ * STRUCTURES:
++ */
++
++/* mini_fo inode data in memory */
++struct mini_fo_inode_info {
++	inode_t *wii_inode;
++	inode_t *wii_inode2; /* pointer to storage inode */
++
++	/* META-data lists */
++	/* deleted list, ex wol */
++	struct list_head deleted_list;
++	int deleted_list_size;
++
++	/* renamed list */
++	struct list_head renamed_list;
++	int renamed_list_size;
++
++	/* add other lists here ... */
++};
++
++/* mini_fo dentry data in memory */
++struct mini_fo_dentry_info {
++	dentry_t *wdi_dentry;
++	dentry_t *wdi_dentry2; /* pointer to  storage dentry */
++	unsigned int state;  /* state of the mini_fo dentry */
++};
++
++
++/* mini_fo super-block data in memory */
++struct mini_fo_sb_info {
++	super_block_t *wsi_sb, *wsi_sb2; /* mk: might point to the same sb */
++	struct vfsmount *hidden_mnt, *hidden_mnt2;
++	dentry_t *base_dir_dentry;
++	dentry_t *storage_dir_dentry;
++	;
++};
++
++/* readdir_data, readdir helper struct */
++struct readdir_data {
++	struct list_head ndl_list; /* linked list head ptr */
++	int ndl_size; /* list size */
++	int sto_done; /* flag to show that the storage dir entries have
++		       * all been read an now follow base entries */
++};
++
++/* file private data. */
++struct mini_fo_file_info {
++	struct file *wfi_file;
++	struct file *wfi_file2; /* pointer to storage file */
++	struct readdir_data rd;
++};
++
++/* struct ndl_entry */
++struct ndl_entry {
++	struct list_head list;
++	char *name;
++	int len;
++};
++
++/********************************
++ *  META-data structures
++ ********************************/
++
++/* deleted entry */
++struct deleted_entry {
++	struct list_head list;
++	char *name;
++	int len;
++};
++
++/* renamed entry */
++struct renamed_entry {
++	struct list_head list;
++	char *old_name;     /* old directory with full path */
++	int old_len;        /* length of above string */
++	char *new_name;     /* new directory name */
++	int new_len;        /* length of above string */
++};
++
++/* attr_change entry */
++struct attr_change_entry {
++	struct list_head list;
++	char *name;
++	int len;
++};
++
++/* link entry */
++struct link_entry {
++	struct list_head list;
++	int links_moved;
++	int inum_base;
++	int inum_sto;
++	char *weird_name;
++	int weird_name_len;
++};
++
++
++/* Some other stuff required for mini_fo_filldir64, copied from
++ * fs/readdir.c
++ */
++
++#define ROUND_UP64(x) (((x)+sizeof(u64)-1) & ~(sizeof(u64)-1))
++#define NAME_OFFSET(de) ((int) ((de)->d_name - (char *) (de)))
++
++
++struct linux_dirent64 {
++        u64             d_ino;
++        s64             d_off;
++        unsigned short  d_reclen;
++        unsigned char   d_type;
++        char            d_name[0];
++};
++
++
++struct getdents_callback64 {
++        struct linux_dirent64 * current_dir;
++        struct linux_dirent64 * previous;
++        int count;
++        int error;
++};
++
++struct linux_dirent {
++	unsigned long   d_ino;
++	unsigned long   d_off;
++	unsigned short  d_reclen;
++	char            d_name[1];
++};
++
++struct getdents_callback {
++	struct linux_dirent * current_dir;
++	struct linux_dirent * previous;
++	int count;
++	int error;
++};
++
++
++/*
++ * MACROS:
++ */
++
++/* file TO private_data */
++# define ftopd(file) ((struct mini_fo_file_info *)((file)->private_data))
++# define __ftopd(file) ((file)->private_data)
++/* file TO hidden_file */
++# define ftohf(file) ((ftopd(file))->wfi_file)
++# define ftohf2(file) ((ftopd(file))->wfi_file2)
++
++/* inode TO private_data */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++# define itopd(ino) ((struct mini_fo_inode_info *)(ino)->i_private)
++# define __itopd(ino) ((ino)->i_private)
++#else
++# define itopd(ino) ((struct mini_fo_inode_info *)(ino)->u.generic_ip)
++# define __itopd(ino) ((ino)->u.generic_ip)
++#endif
++/* inode TO hidden_inode */
++# define itohi(ino) (itopd(ino)->wii_inode)
++# define itohi2(ino) (itopd(ino)->wii_inode2)
++
++/* superblock TO private_data */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++# define stopd(super) ((struct mini_fo_sb_info *)(super)->s_fs_info)
++# define __stopd(super) ((super)->s_fs_info)
++#else
++# define stopd(super) ((struct mini_fo_sb_info *)(super)->u.generic_sbp)
++# define __stopd(super) ((super)->u.generic_sbp)
++#endif
++
++/* unused? # define vfs2priv stopd */
++/* superblock TO hidden_superblock */
++
++# define stohs(super) (stopd(super)->wsi_sb)
++# define stohs2(super) (stopd(super)->wsi_sb2)
++
++/* dentry TO private_data */
++# define dtopd(dentry) ((struct mini_fo_dentry_info *)(dentry)->d_fsdata)
++# define __dtopd(dentry) ((dentry)->d_fsdata)
++/* dentry TO hidden_dentry */
++# define dtohd(dent) (dtopd(dent)->wdi_dentry)
++# define dtohd2(dent) (dtopd(dent)->wdi_dentry2)
++
++/* dentry to state */
++# define dtost(dent) (dtopd(dent)->state)
++# define sbt(sb) ((sb)->s_type->name)
++
++#define IS_WRITE_FLAG(flag) (flag & (O_RDWR | O_WRONLY | O_APPEND))
++#define IS_COPY_FLAG(flag) (flag & (COPY_FLAGS))
++
++/* macros to simplify non-SCA code */
++#  define MALLOC_PAGE_POINTERS(hidden_pages, num_hidden_pages)
++#  define MALLOC_PAGEDATA_POINTERS(hidden_pages_data, num_hidden_pages)
++#  define FREE_PAGE_POINTERS(hidden_pages, num)
++#  define FREE_PAGEDATA_POINTERS(hidden_pages_data, num)
++#  define FOR_EACH_PAGE
++#  define CURRENT_HIDDEN_PAGE hidden_page
++#  define CURRENT_HIDDEN_PAGEDATA hidden_page_data
++#  define CURRENT_HIDDEN_PAGEINDEX page->index
++
++/*
++ * EXTERNALS:
++ */
++extern struct file_operations mini_fo_main_fops;
++extern struct file_operations mini_fo_dir_fops;
++extern struct inode_operations mini_fo_main_iops;
++extern struct inode_operations mini_fo_dir_iops;
++extern struct inode_operations mini_fo_symlink_iops;
++extern struct super_operations mini_fo_sops;
++extern struct dentry_operations mini_fo_dops;
++extern struct vm_operations_struct mini_fo_shared_vmops;
++extern struct vm_operations_struct mini_fo_private_vmops;
++extern struct address_space_operations mini_fo_aops;
++
++#if 0 /* unused by mini_fo */
++extern int mini_fo_interpose(dentry_t *hidden_dentry, dentry_t *this_dentry, super_block_t *sb, int flag);
++#if defined(FIST_FILTER_DATA) || defined(FIST_FILTER_SCA)
++extern page_t *mini_fo_get1page(file_t *file, int index);
++extern int mini_fo_fill_zeros(file_t *file, page_t *page, unsigned from);
++# endif /* FIST_FILTER_DATA || FIST_FILTER_SCA */
++
++
++#  define mini_fo_hidden_dentry(d) __mini_fo_hidden_dentry(__FILE__,__FUNCTION__,__LINE__,(d))
++#  define mini_fo_hidden_sto_dentry(d) __mini_fo_hidden_sto_dentry(__FILE__,__FUNCTION__,__LINE__,(d))
++
++extern dentry_t *__mini_fo_hidden_dentry(char *file, char *func, int line, dentry_t *this_dentry);
++extern dentry_t *__mini_fo_hidden_sto_dentry(char *file, char *func, int line, dentry_t *this_dentry);
++
++extern int mini_fo_read_file(const char *filename, void *buf, int len);
++extern int mini_fo_write_file(const char *filename, void *buf, int len);
++extern dentry_t *fist_lookup(dentry_t *dir, const char *name, vnode_t **out, uid_t uid, gid_t gid);
++#endif /* unused by mini_fo */
++
++/* state transition functions */
++extern int nondir_unmod_to_mod(dentry_t *dentry, int cp_flag);
++extern int nondir_del_rew_to_del(dentry_t *dentry);
++extern int nondir_creat_to_del(dentry_t *dentry);
++extern int nondir_mod_to_del(dentry_t *dentry);
++extern int nondir_unmod_to_del(dentry_t *dentry);
++
++extern int dir_unmod_to_mod(dentry_t *dentry);
++
++/* rename specials */
++extern int rename_directory(inode_t *old_dir, dentry_t *old_dentry, inode_t *new_dir, dentry_t *new_dentry);
++extern int rename_nondir(inode_t *old_dir, dentry_t *old_dentry, inode_t *new_dir, dentry_t *new_dentry);
++
++/* misc stuff */
++extern int mini_fo_tri_interpose(dentry_t *hidden_dentry,
++				 dentry_t *hidden_sto_dentry,
++				 dentry_t *dentry,
++				 super_block_t *sb, int flag);
++
++extern int mini_fo_cp_cont(dentry_t *tgt_dentry, struct vfsmount *tgt_mnt,
++			   dentry_t *src_dentry, struct vfsmount *src_mnt);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++extern int mini_fo_create(inode_t *dir, dentry_t *dentry, int mode, struct nameidata *nd);
++
++extern int create_sto_nod(dentry_t *dentry, int mode, dev_t dev);
++extern int create_sto_reg_file(dentry_t *dentry, int mode, struct nameidata *nd);
++#else
++extern int mini_fo_create(inode_t *dir, dentry_t *dentry, int mode);
++
++extern int create_sto_nod(dentry_t *dentry, int mode, int dev);
++extern int create_sto_reg_file(dentry_t *dentry, int mode);
++#endif
++
++extern int create_sto_dir(dentry_t *dentry, int mode);
++
++extern int exists_in_storage(dentry_t *dentry);
++extern int is_mini_fo_existant(dentry_t *dentry);
++extern int get_neg_sto_dentry(dentry_t *dentry);
++extern int build_sto_structure(dentry_t *dir, dentry_t *dentry);
++extern int get_mini_fo_bpath(dentry_t *dentry, char **bpath, int *bpath_len);
++extern dentry_t *bpath_walk(super_block_t *sb, char *bpath);
++extern int bpath_put(dentry_t *dentry);
++
++/* check_mini_fo types functions */
++extern int check_mini_fo_dentry(dentry_t *dentry);
++extern int check_mini_fo_file(file_t *file);
++extern int check_mini_fo_inode(inode_t *inode);
++
++/* General meta functions, can be called from outside of meta.c */
++extern int meta_build_lists(dentry_t *dentry);
++extern int meta_put_lists(dentry_t *dentry);
++extern int __meta_put_lists(inode_t *inode);
++
++extern int meta_add_d_entry(dentry_t *dentry, const char *name, int len);
++extern int meta_add_r_entry(dentry_t *dentry,
++			    const char *old_name, int old_len,
++			    const char *new_name, int new_len);
++
++extern int meta_remove_r_entry(dentry_t *dentry, const char *name, int len);
++
++extern int meta_check_d_entry(dentry_t *dentry, const char *name, int len);
++extern int __meta_check_d_entry(inode_t *inode, const char *name, int len);
++
++extern char* meta_check_r_entry(dentry_t *dentry, const char *name, int len);
++extern char* __meta_check_r_entry(inode_t *inode, const char *name, int len);
++extern int meta_is_r_entry(dentry_t *dentry, const char *name, int len);
++extern int __meta_is_r_entry(inode_t *inode, const char *name, int len);
++
++/* Specific meta functions, should be called only inside meta.c */
++extern int __meta_put_d_list(inode_t *inode);
++extern int __meta_put_r_list(inode_t *inode);
++
++extern int meta_list_add_d_entry(dentry_t *dentry,
++				 const char *name, int len);
++extern int meta_list_add_r_entry(dentry_t *dentry,
++				 const char *old_name, int old_len,
++				 const char *new_name, int new_len);
++
++extern int meta_list_remove_r_entry(dentry_t *dentry,
++				    const char *name, int len);
++
++extern int __meta_list_remove_r_entry(inode_t *inode,
++				      const char *name, int len);
++
++extern int meta_write_d_entry(dentry_t *dentry, const char *name, int len);
++extern int meta_write_r_entry(dentry_t *dentry,
++			      const char *old_name, int old_len,
++			      const char *new_name, int new_len);
++
++extern int meta_sync_lists(dentry_t *dentry);
++extern int meta_sync_d_list(dentry_t *dentry, int app_flag);
++extern int meta_sync_r_list(dentry_t *dentry, int app_flag);
++
++/* ndl stuff */
++extern int ndl_add_entry(struct readdir_data *rd, const char *name, int len);
++extern void ndl_put_list(struct readdir_data *rd);
++extern int ndl_check_entry(struct readdir_data *rd,
++			   const char *name, int len);
++
++
++# define copy_inode_size(dst, src) \
++    dst->i_size = src->i_size; \
++    dst->i_blocks = src->i_blocks;
++
++static inline void
++fist_copy_attr_atime(inode_t *dest, const inode_t *src)
++{
++	ASSERT(dest != NULL);
++	ASSERT(src != NULL);
++	dest->i_atime = src->i_atime;
++}
++static inline void
++fist_copy_attr_times(inode_t *dest, const inode_t *src)
++{
++	ASSERT(dest != NULL);
++	ASSERT(src != NULL);
++	dest->i_atime = src->i_atime;
++	dest->i_mtime = src->i_mtime;
++	dest->i_ctime = src->i_ctime;
++}
++static inline void
++fist_copy_attr_timesizes(inode_t *dest, const inode_t *src)
++{
++	ASSERT(dest != NULL);
++	ASSERT(src != NULL);
++	dest->i_atime = src->i_atime;
++	dest->i_mtime = src->i_mtime;
++	dest->i_ctime = src->i_ctime;
++	copy_inode_size(dest, src);
++}
++static inline void
++fist_copy_attr_all(inode_t *dest, const inode_t *src)
++{
++	ASSERT(dest != NULL);
++	ASSERT(src != NULL);
++	dest->i_mode = src->i_mode;
++	dest->i_nlink = src->i_nlink;
++	dest->i_uid = src->i_uid;
++	dest->i_gid = src->i_gid;
++	dest->i_rdev = src->i_rdev;
++	dest->i_atime = src->i_atime;
++	dest->i_mtime = src->i_mtime;
++	dest->i_ctime = src->i_ctime;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)
++	dest->i_blksize = src->i_blksize;
++#endif
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,12)
++	dest->i_blkbits = src->i_blkbits;
++# endif /* linux 2.4.12 and newer */
++	copy_inode_size(dest, src);
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	dest->i_attr_flags = src->i_attr_flags;
++#else
++	dest->i_flags = src->i_flags;
++#endif
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++/* copied from linux/fs.h */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++static inline void double_lock(struct dentry *d1, struct dentry *d2)
++{
++	struct mutex *m1 = &d1->d_inode->i_mutex;
++	struct mutex *m2 = &d2->d_inode->i_mutex;
++	if (m1 != m2) {
++		if ((unsigned long) m1 < (unsigned long) m2) {
++			struct mutex *tmp = m2;
++			m2 = m1; m1 = tmp;
++		}
++		mutex_lock(m1);
++	}
++	mutex_lock(m2);
++}
++
++static inline void double_unlock(struct dentry *d1, struct dentry *d2)
++{
++	struct mutex *m1 = &d1->d_inode->i_mutex;
++	struct mutex *m2 = &d2->d_inode->i_mutex;
++	mutex_unlock(m1);
++	if (m1 != m2)
++		mutex_unlock(m2);
++	dput(d1);
++	dput(d2);
++}
++
++#else
++static inline void double_down(struct semaphore *s1, struct semaphore *s2)
++{
++        if (s1 != s2) {
++                if ((unsigned long) s1 < (unsigned long) s2) {
++                        struct semaphore *tmp = s2;
++                        s2 = s1; s1 = tmp;
++                }
++                down(s1);
++        }
++        down(s2);
++}
++
++static inline void double_up(struct semaphore *s1, struct semaphore *s2)
++{
++        up(s1);
++        if (s1 != s2)
++                up(s2);
++}
++
++static inline void double_lock(struct dentry *d1, struct dentry *d2)
++{
++        double_down(&d1->d_inode->i_sem, &d2->d_inode->i_sem);
++}
++
++static inline void double_unlock(struct dentry *d1, struct dentry *d2)
++{
++        double_up(&d1->d_inode->i_sem,&d2->d_inode->i_sem);
++        dput(d1);
++        dput(d2);
++}
++#endif   /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) */
++#endif  /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) */
++#endif /* __KERNEL__ */
++
++/*
++ * Definitions for user and kernel code
++ */
++
++/* ioctls */
++
++#endif	/* not __MINI_FO_H_ */
+--- /dev/null
++++ b/fs/mini_fo/mini_fo-merge
+@@ -0,0 +1,180 @@
++#!/bin/bash
++#
++# Copyright (C) 2005 Markus Klotzbuecher <mk@creamnet.de>
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License
++# as published by the Free Software Foundation; either version
++# 2 of the License, or (at your option) any later version.
++#
++
++BASE=
++STO=
++HELP=
++DRYRUN=
++VERBOSE=
++TMP="/tmp/"
++META_NAME="META_dAfFgHE39ktF3HD2sr"
++SKIP_DEL_LIST="skip-delete-list.mini_fo-merge"
++
++COMMAND=
++exec_command()
++{
++    if [ x$DRYRUN == "xset" ]; then
++	echo "  would run: $COMMAND"
++    elif ! [ x$DRYRUN == "xset" ]; then
++	if [ x$VERBOSE == "xset" ]; then
++	    echo "  running: $COMMAND"
++	fi
++	eval $COMMAND
++    fi
++}
++
++usage()
++{
++cat <<EOF
++
++USAGE: $0 -b <base dir> -s <storage dir>
++Version 0.1
++
++This script merges the contents of a mini_fo storage file system back
++to the base file system.
++
++!!! Warning: This will modify the base filesystem and can destroy data
++             if used wrongly.
++
++Options:
++     -b <base dir>
++          the directory of the base file system.
++
++     -s <storage dir>
++          the directory of the storage file system.
++
++     -d   dry run, will not change anything and print the commands that
++          would be executed.
++
++     -t   tmp dir for storing temporary file. default: $TMP
++
++     -v   show what operations are performed.
++
++     -h   displays this message.
++
++EOF
++}
++
++# parse parameters
++while getopts hdvt:b:s: OPTS
++  do
++  case $OPTS in
++      h)  HELP="set";;
++      d)  DRYRUN="set";;
++      v)  VERBOSE="set";;
++      b)  BASE="$OPTARG";;
++      s)  STO="$OPTARG";;
++      t)  TMP="$OPTARG";;
++      ?)  usage
++	  exit 1;;
++  esac
++done
++
++if [ "x$HELP" == "xset" ]; then
++    usage
++    exit -1
++fi
++
++if ! [ -d "$BASE" ] || ! [ -d "$STO" ]; then
++    echo -e "$0:\n Error, -s and/or -b argument missing. type $0 -h for help."
++    exit -1;
++fi
++
++# get full paths
++pushd $STO; STO=`pwd`; popd
++pushd $BASE; BASE=`pwd`; popd
++TMP=${TMP%/}
++
++
++cat<<EOF
++###############################################################################
++# mini_fo-merge
++#
++# base dir:       $BASE
++# storage dir:    $STO
++# meta filename:  $META_NAME
++# dry run:        $DRYRUN
++# verbose:        $VERBOSE
++# tmp files:      $TMP
++###############################################################################
++
++EOF
++
++rm $TMP/$SKIP_DEL_LIST
++
++# first process all renamed dirs
++echo "Merging renamed directories..."
++pushd $STO &> /dev/null
++find . -name $META_NAME -type f -print0  | xargs -0 -e grep  -e '^R ' | tr -s ':R' ' ' | while read ENTRY; do
++    echo "entry: $ENTRY"
++    META_FILE=`echo $ENTRY | cut -d ' ' -f 1`
++    OLD_B_DIR=`echo $ENTRY | cut -d ' ' -f 2 | sed -e 's/\///'`
++    NEW_NAME=`echo $ENTRY | cut -d ' ' -f 3`
++    NEW_B_DIR=`echo $META_FILE | sed -e "s/$META_NAME/$NEW_NAME/" | sed -e 's/^\.\///'`
++    echo "META_FILE: $META_FILE"
++    echo "OLD_B_DIR: $OLD_B_DIR"
++    echo "NEW_NAME: $NEW_NAME"
++    echo  "NEW_B_DIR: $NEW_B_DIR"
++
++    pushd $BASE &> /dev/null
++    # remove an existing dir in storage
++    COMMAND="rm -rf $NEW_B_DIR"; exec_command
++    COMMAND="cp -R $OLD_B_DIR $NEW_B_DIR"; exec_command
++    echo ""
++    popd &> /dev/null
++
++    # remember this dir to exclude it from deleting later
++    echo $NEW_B_DIR >> $TMP/$SKIP_DEL_LIST
++done
++
++# delete all whiteouted files from base
++echo -e "\nDeleting whiteout'ed files from base file system..."
++find . -name $META_NAME -type f -print0  | xargs -0 -e grep  -e '^D ' | sed -e 's/:D//' | while read ENTRY; do
++    META_FILE=`echo $ENTRY | cut -d ' ' -f 1`
++    DEL_NAME=`echo $ENTRY | cut -d ' ' -f 2`
++    DEL_FILE=`echo $META_FILE | sed -e "s/$META_NAME/$DEL_NAME/" | sed -e 's/^\.\///'`
++    grep -x $DEL_FILE $TMP/$SKIP_DEL_LIST &> /dev/null
++    if [ $? -ne 0 ]; then
++	pushd $BASE &> /dev/null
++	COMMAND="rm -rf $DEL_FILE"; exec_command
++	popd &> /dev/null
++    else
++	echo "  excluding: $DEL_FILE as in skip-del-list."
++    fi
++done
++
++# create all dirs and update permissions
++echo -e "\nSetting up directory structures in base file system..."
++find . -type d | sed -e 's/^\.\///' | while read DIR; do
++    PERMS=`stat -c %a $DIR`
++    DIR_UID=`stat -c %u $DIR`
++    DIR_GID=`stat -c %g $DIR`
++    pushd $BASE &> /dev/null
++    if ! [ -d $DIR ]; then
++	COMMAND="mkdir -p $DIR"; exec_command
++    fi
++    COMMAND="chmod $PERMS $DIR"; exec_command
++    COMMAND="chown $DIR_UID:$DIR_GID $DIR"; exec_command
++    popd &> /dev/null
++done
++
++# merge all non-directory files
++echo -e "\nMerging all non-directory files...."
++for i in b c p f l s; do
++    find . -type $i | sed -e 's/^\.\///' | grep -v "$META_NAME" | while read FILE; do
++	pushd $BASE #&> /dev/null
++	COMMAND="cp -df $STO/$FILE $BASE/$FILE"; exec_command
++	popd &> /dev/null
++    done
++done
++popd &> /dev/null
++
++#rm $TMP/$SKIP_DEL_LIST
++
++echo "Done!"
+--- /dev/null
++++ b/fs/mini_fo/mini_fo-overlay
+@@ -0,0 +1,130 @@
++#!/bin/bash
++#
++# Copyright (C) 2005 Markus Klotzbuecher <mk@creamnet.de>
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License
++# as published by the Free Software Foundation; either version
++# 2 of the License, or (at your option) any later version.
++#
++
++HELP=
++SUFF=
++MNTP=
++MNT_DIR="/mnt"
++STO=
++STO_DIR="/tmp"
++BASE=
++
++usage()
++{
++cat <<EOF
++
++Usage: $0 [-s suffix] [-d sto_dir_dir] [-m mount point] base_dir
++Version 0.1
++
++This script overlays the given base directory using the mini_fo file
++system. If only the base directory base_dir is given, $0
++will use a storage directory called "sto-<base_dir_name>" in $STO_DIR,
++and mount point "mini_fo-<base_dir_dir>" in $MNT_DIR.
++
++Options:
++     -s <suffix>
++          add given suffix to storage directory and the mount
++          point. This is usefull for overlaying one base directory
++          several times and avoiding conflicts with storage directory
++          names and mount points.
++
++     -d <sto_dir_dir>
++          change the directory in which the storage directory will be
++          created (default is currently "$STO_DIR".
++
++     -m <mount point>
++          use an alternative directory to create the mini_fo
++          mountpoint (default is currently "$MNT_DIR".
++
++     -h   displays this message.
++
++EOF
++exit 1;
++}
++
++while getopts hm:s:d: OPTS
++  do
++  case $OPTS in
++      s)  SUFF="$OPTARG";;
++      d)  STO_DIR="$OPTARG";;
++      m)  MNT_DIR="$OPTARG";;
++      h)  HELP="set";;
++      ?)  usage
++	  exit 1;;
++  esac
++done
++shift $(($OPTIND - 1))
++
++BASE="$1"
++
++if [ "x$HELP" == "xset" ]; then
++    usage
++    exit -1
++fi
++
++# fix suffix
++if [ "x$SUFF" != "x" ]; then
++    SUFF="-$SUFF"
++fi
++
++# kill trailing slashes
++MNT_DIR=${MNT_DIR%/}
++STO_DIR=${STO_DIR%/}
++BASE=${BASE%/}
++
++
++if ! [ -d "$BASE" ]; then
++    echo "invalid base dir $BASE, run $0 -h for help."
++    exit -1
++fi
++
++# check opts
++if ! [ -d "$MNT_DIR" ]; then
++    echo "invalid mount dir $MNT_DIR, run $0 -h for help."
++    exit -1
++fi
++
++if ! [ -d "$STO_DIR" ]; then
++    echo "invalid sto_dir_dir $STO_DIR, run $0 -h for help."
++    exit -1
++fi
++
++MNTP="$MNT_DIR/mini_fo-`basename $BASE`$SUFF"
++STO="$STO_DIR/sto-`basename $BASE`$SUFF"
++
++# create the mount point if it doesn't exist
++mkdir -p $MNTP
++if [ $? -ne 0 ]; then
++    echo "Error, failed to create mount point $MNTP"
++fi
++
++mkdir -p $STO
++if [ $? -ne 0 ]; then
++    echo "Error, failed to create storage dir $STO"
++fi
++
++# check if fs is already mounted
++mount | grep mini_fo | grep $MNTP &> /dev/null
++if [ $? -eq 0 ]; then
++    echo "Error, existing mini_fo mount at $MNTP."
++    exit -1
++fi
++
++mount | grep mini_fo | grep $STO &> /dev/null
++if [ $? -eq 0 ]; then
++    echo "Error, $STO seems to be used already."
++    exit -1
++fi
++
++# mount
++mount -t mini_fo -o base=$BASE,sto=$STO $BASE $MNTP
++
++if [ $? -ne 0 ]; then
++    echo "Error, mounting failed, maybe no permisson to mount?"
++fi
+--- /dev/null
++++ b/fs/mini_fo/mmap.c
+@@ -0,0 +1,637 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif /* HAVE_CONFIG_H */
++
++#include "fist.h"
++#include "mini_fo.h"
++
++
++#ifdef FIST_COUNT_WRITES
++/* for counting writes in the middle vs. regular writes */
++unsigned long count_writes = 0, count_writes_middle = 0;
++#endif /* FIST_COUNT_WRITES */
++
++/* forward declaration of commit write and prepare write */
++STATIC int mini_fo_commit_write(file_t *file, page_t *page, unsigned from, unsigned to);
++STATIC int mini_fo_prepare_write(file_t *file, page_t *page, unsigned from, unsigned to);
++
++
++/*
++ * Function for handling creation of holes when lseek-ing past the
++ * end of the file and then writing some data.
++ */
++int
++mini_fo_fill_zeros(file_t* file, page_t *page, unsigned from)
++{
++	int err = 0;
++	dentry_t *dentry = file->f_dentry;
++	inode_t *inode = dentry->d_inode;
++	page_t *tmp_page;
++	int index;
++
++	print_entry_location();
++
++	for (index = inode->i_size >> PAGE_CACHE_SHIFT; index < page->index; index++) {
++		tmp_page = mini_fo_get1page(file, index);
++		if (IS_ERR(tmp_page)) {
++			err = PTR_ERR(tmp_page);
++			goto out;
++		}
++
++		/*
++		 * zero out rest of the contents of the page between the appropriate
++		 * offsets.
++		 */
++		memset((char*)page_address(tmp_page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, PAGE_CACHE_SIZE - (inode->i_size & ~PAGE_CACHE_MASK));
++
++		if (! (err = mini_fo_prepare_write(file, tmp_page, 0, PAGE_CACHE_SIZE)))
++			err = mini_fo_commit_write(file, tmp_page, 0, PAGE_CACHE_SIZE);
++
++		page_cache_release(tmp_page);
++		if (err < 0)
++			goto out;
++		if (current->need_resched)
++			schedule();
++	}
++
++	/* zero out appropriate parts of last page */
++
++	/*
++	 * if the encoding type is block, then adjust the 'from' (where the
++	 * zeroing will start) offset appropriately
++	 */
++	from = from & (~(FIST_ENCODING_BLOCKSIZE - 1));
++
++	if ((from - (inode->i_size & ~PAGE_CACHE_MASK)) > 0) {
++
++		memset((char*)page_address(page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, from - (inode->i_size & ~PAGE_CACHE_MASK));
++		if (! (err = mini_fo_prepare_write(file, page, 0, PAGE_CACHE_SIZE)))
++			err = mini_fo_commit_write(file, page, 0, PAGE_CACHE_SIZE);
++
++		if (err < 0)
++			goto out;
++		if (current->need_resched)
++			schedule();
++	}
++
++ out:
++	print_exit_status(err);
++	return err;
++}
++
++
++
++STATIC int
++mini_fo_writepage(page_t *page)
++{
++	int err = -EIO;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	page_t *hidden_page;
++	char *kaddr, *hidden_kaddr;
++
++	print_entry_location();
++
++	inode = page->mapping->host;
++	hidden_inode = itohi(inode);
++
++	/*
++	 * writepage is called when shared mmap'ed files need to write
++	 * their pages, while prepare/commit_write are called from the
++	 * non-paged write() interface.  (However, in 2.3 the two interfaces
++	 * share the same cache, while in 2.2 they didn't.)
++	 *
++	 * So we pretty much have to duplicate much of what commit_write does.
++	 */
++
++	/* find lower page (returns a locked page) */
++	hidden_page = grab_cache_page(hidden_inode->i_mapping, page->index);
++	if (!hidden_page)
++		goto out;
++
++	/* get page address, and encode it */
++	kaddr = (char *) kmap(page);
++	hidden_kaddr = (char*) kmap(hidden_page);
++	mini_fo_encode_block(kaddr, hidden_kaddr, PAGE_CACHE_SIZE, inode, inode->i_sb, page->index);
++	/* if encode_block could fail, then return error */
++	kunmap(page);
++	kunmap(hidden_page);
++
++	/* call lower writepage (expects locked page) */
++	err = hidden_inode->i_mapping->a_ops->writepage(hidden_page);
++
++	/*
++	 * update mtime and ctime of lower level file system
++	 * mini_fo' mtime and ctime are updated by generic_file_write
++	 */
++	hidden_inode->i_mtime = hidden_inode->i_ctime = CURRENT_TIME;
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,1)
++	UnlockPage(hidden_page);	/* b/c grab_cache_page locked it */
++# endif /* kernel older than 2.4.1 */
++	page_cache_release(hidden_page); /* b/c grab_cache_page increased refcnt */
++
++	if (err)
++		ClearPageUptodate(page);
++	else
++		SetPageUptodate(page);
++ out:
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,1)
++	UnlockPage(page);
++# endif /* kernel 2.4.1 and newer */
++	print_exit_status(err);
++	return err;
++}
++
++
++/*
++ * get one page from cache or lower f/s, return error otherwise.
++ * returns unlocked, up-to-date page (if ok), with increased refcnt.
++ */
++page_t *
++mini_fo_get1page(file_t *file, int index)
++{
++	page_t *page;
++	dentry_t *dentry;
++	inode_t *inode;
++	struct address_space *mapping;
++	int err;
++
++	print_entry_location();
++
++	dentry = file->f_dentry; /* CPW: Moved below print_entry_location */
++	inode = dentry->d_inode;
++	mapping = inode->i_mapping;
++
++	fist_dprint(8, "%s: read page index %d pid %d\n", __FUNCTION__, index, current->pid);
++	if (index < 0) {
++		printk("%s BUG: index=%d\n", __FUNCTION__, index);
++		page = ERR_PTR(-EIO);
++		goto out;
++	}
++	page = read_cache_page(mapping,
++			       index,
++			       (filler_t *) mapping->a_ops->readpage,
++			       (void *) file);
++	if (IS_ERR(page))
++		goto out;
++	wait_on_page(page);
++	if (!Page_Uptodate(page)) {
++		lock_page(page);
++		err = mapping->a_ops->readpage(file, page);
++		if (err) {
++			page = ERR_PTR(err);
++			goto out;
++		}
++		wait_on_page(page);
++		if (!Page_Uptodate(page)) {
++			page = ERR_PTR(-EIO);
++			goto out;
++		}
++	}
++
++ out:
++	print_exit_pointer(page);
++	return page;
++}
++
++
++/*
++ * get one page from cache or lower f/s, return error otherwise.
++ * similar to get1page, but doesn't guarantee that it will return
++ * an unlocked page.
++ */
++page_t *
++mini_fo_get1page_cached(file_t *file, int index)
++{
++	page_t *page;
++	dentry_t *dentry;
++	inode_t *inode;
++	struct address_space *mapping;
++	int err;
++
++	print_entry_location();
++
++	dentry = file->f_dentry; /* CPW: Moved below print_entry_location */
++	inode = dentry->d_inode;
++	mapping = inode->i_mapping;
++
++	fist_dprint(8, "%s: read page index %d pid %d\n", __FUNCTION__, index, current->pid);
++	if (index < 0) {
++		printk("%s BUG: index=%d\n", __FUNCTION__, index);
++		page = ERR_PTR(-EIO);
++		goto out;
++	}
++	page = read_cache_page(mapping,
++			       index,
++			       (filler_t *) mapping->a_ops->readpage,
++			       (void *) file);
++	if (IS_ERR(page))
++		goto out;
++
++ out:
++	print_exit_pointer(page);
++	return page;
++}
++
++
++/*
++ * readpage is called from generic_page_read and the fault handler.
++ * If your file system uses generic_page_read for the read op, it
++ * must implement readpage.
++ *
++ * Readpage expects a locked page, and must unlock it.
++ */
++STATIC int
++mini_fo_do_readpage(file_t *file, page_t *page)
++{
++	int err = -EIO;
++	dentry_t *dentry;
++	file_t *hidden_file = NULL;
++	dentry_t *hidden_dentry;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	char *page_data;
++	page_t *hidden_page;
++	char *hidden_page_data;
++	int real_size;
++
++	print_entry_location();
++
++	dentry = file->f_dentry; /* CPW: Moved below print_entry_location */
++	if (ftopd(file) != NULL)
++		hidden_file = ftohf(file);
++	hidden_dentry = dtohd(dentry);
++	inode = dentry->d_inode;
++	hidden_inode = itohi(inode);
++
++	fist_dprint(7, "%s: requesting page %d from file %s\n", __FUNCTION__, page->index, dentry->d_name.name);
++
++	MALLOC_PAGE_POINTERS(hidden_pages, num_hidden_pages);
++	MALLOC_PAGEDATA_POINTERS(hidden_pages_data, num_hidden_pages);
++	FOR_EACH_PAGE
++		CURRENT_HIDDEN_PAGE = NULL;
++
++	/* find lower page (returns a locked page) */
++	FOR_EACH_PAGE {
++		fist_dprint(8, "%s: Current page index = %d\n", __FUNCTION__, CURRENT_HIDDEN_PAGEINDEX);
++		CURRENT_HIDDEN_PAGE = read_cache_page(hidden_inode->i_mapping,
++						      CURRENT_HIDDEN_PAGEINDEX,
++						      (filler_t *) hidden_inode->i_mapping->a_ops->readpage,
++						      (void *) hidden_file);
++		if (IS_ERR(CURRENT_HIDDEN_PAGE)) {
++			err = PTR_ERR(CURRENT_HIDDEN_PAGE);
++			CURRENT_HIDDEN_PAGE = NULL;
++			goto out_release;
++		}
++	}
++
++	/*
++	 * wait for the page data to show up
++	 * (signaled by readpage as unlocking the page)
++	 */
++	FOR_EACH_PAGE {
++		wait_on_page(CURRENT_HIDDEN_PAGE);
++		if (!Page_Uptodate(CURRENT_HIDDEN_PAGE)) {
++			/*
++			 * call readpage() again if we returned from wait_on_page with a
++			 * page that's not up-to-date; that can happen when a partial
++			 * page has a few buffers which are ok, but not the whole
++			 * page.
++			 */
++			lock_page(CURRENT_HIDDEN_PAGE);
++			err = hidden_inode->i_mapping->a_ops->readpage(hidden_file,
++								       CURRENT_HIDDEN_PAGE);
++			if (err) {
++				CURRENT_HIDDEN_PAGE = NULL;
++				goto out_release;
++			}
++			wait_on_page(CURRENT_HIDDEN_PAGE);
++			if (!Page_Uptodate(CURRENT_HIDDEN_PAGE)) {
++				err = -EIO;
++				goto out_release;
++			}
++		}
++	}
++
++	/* map pages, get their addresses */
++	page_data = (char *) kmap(page);
++	FOR_EACH_PAGE
++		CURRENT_HIDDEN_PAGEDATA = (char *) kmap(CURRENT_HIDDEN_PAGE);
++
++	/* if decode_block could fail, then return error */
++	err = 0;
++	real_size = hidden_inode->i_size - (page->index << PAGE_CACHE_SHIFT);
++	if (real_size <= 0)
++		memset(page_data, 0, PAGE_CACHE_SIZE);
++	else if (real_size < PAGE_CACHE_SIZE) {
++		mini_fo_decode_block(hidden_page_data, page_data, real_size, inode, inode->i_sb, page->index);
++		memset(page_data + real_size, 0, PAGE_CACHE_SIZE - real_size);
++	} else
++		mini_fo_decode_block(hidden_page_data, page_data, PAGE_CACHE_SIZE, inode, inode->i_sb, page->index);
++
++	FOR_EACH_PAGE
++		kunmap(CURRENT_HIDDEN_PAGE);
++	kunmap(page);
++
++ out_release:
++	FOR_EACH_PAGE
++		if (CURRENT_HIDDEN_PAGE)
++			page_cache_release(CURRENT_HIDDEN_PAGE); /* undo read_cache_page */
++
++	FREE_PAGE_POINTERS(hidden_pages, num_hidden_pages);
++	FREE_PAGEDATA_POINTERS(hidden_pages_data, num_hidden_pages);
++
++ out:
++	if (err == 0)
++		SetPageUptodate(page);
++	else
++		ClearPageUptodate(page);
++
++	print_exit_status(err);
++	return err;
++}
++
++
++STATIC int
++mini_fo_readpage(file_t *file, page_t *page)
++{
++	int err;
++	print_entry_location();
++
++	err = mini_fo_do_readpage(file, page);
++
++	/*
++	 * we have to unlock our page, b/c we _might_ have gotten a locked page.
++	 * but we no longer have to wakeup on our page here, b/c UnlockPage does
++	 * it
++	 */
++	UnlockPage(page);
++
++	print_exit_status(err);
++	return err;
++}
++
++
++STATIC int
++mini_fo_prepare_write(file_t *file, page_t *page, unsigned from, unsigned to)
++{
++	int err = 0;
++
++	print_entry_location();
++
++	/*
++	 * we call kmap(page) only here, and do the kunmap
++	 * and the actual downcalls, including unlockpage and uncache
++	 * in commit_write.
++	 */
++	kmap(page);
++
++	/* fast path for whole page writes */
++	if (from == 0 && to == PAGE_CACHE_SIZE)
++		goto out;
++	/* read the page to "revalidate" our data */
++	/* call the helper function which doesn't unlock the page */
++	if (!Page_Uptodate(page))
++		err = mini_fo_do_readpage(file, page);
++
++ out:
++	print_exit_status(err);
++	return err;
++}
++
++
++
++STATIC int
++mini_fo_commit_write(file_t *file, page_t *page, unsigned from, unsigned to)
++{
++	int err = -ENOMEM;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	page_t *hidden_page;
++	file_t *hidden_file = NULL;
++	loff_t pos;
++	unsigned bytes = to - from;
++	unsigned hidden_from, hidden_to, hidden_bytes;
++
++	print_entry_location();
++
++	inode = page->mapping->host; /* CPW: Moved below print_entry_location */
++	hidden_inode = itohi(inode);
++
++	ASSERT(file != NULL);
++	/*
++	 * here we have a kmapped page, with data from the user copied
++	 * into it.  we need to encode_block it, and then call the lower
++	 * commit_write.  We also need to simulate same behavior of
++	 * generic_file_write, and call prepare_write on the lower f/s first.
++	 */
++#ifdef FIST_COUNT_WRITES
++	count_writes++;
++# endif /* FIST_COUNT_WRITES */
++
++	/* this is append and/or extend -- we can't have holes so fill them in */
++	if (page->index > (hidden_inode->i_size >> PAGE_CACHE_SHIFT)) {
++		page_t *tmp_page;
++		int index;
++		for (index = hidden_inode->i_size >> PAGE_CACHE_SHIFT; index < page->index; index++) {
++			tmp_page = mini_fo_get1page(file, index);
++			if (IS_ERR(tmp_page)) {
++				err = PTR_ERR(tmp_page);
++				goto out;
++			}
++			/* zero out the contents of the page at the appropriate offsets */
++			memset((char*)page_address(tmp_page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, PAGE_CACHE_SIZE - (inode->i_size & ~PAGE_CACHE_MASK));
++			if (!(err = mini_fo_prepare_write(file, tmp_page, 0, PAGE_CACHE_SIZE)))
++				err = mini_fo_commit_write(file, tmp_page, 0, PAGE_CACHE_SIZE);
++			page_cache_release(tmp_page);
++			if (err < 0)
++				goto out;
++			if (current->need_resched)
++				schedule();
++		}
++	}
++
++	if (ftopd(file) != NULL)
++		hidden_file = ftohf(file);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_inode->i_mutex);
++#else
++	down(&hidden_inode->i_sem);
++#endif
++	/* find lower page (returns a locked page) */
++	hidden_page = grab_cache_page(hidden_inode->i_mapping, page->index);
++	if (!hidden_page)
++		goto out;
++
++#if FIST_ENCODING_BLOCKSIZE > 1
++#  error encoding_blocksize greater than 1 is not yet supported
++# endif /* FIST_ENCODING_BLOCKSIZE > 1 */
++
++	hidden_from = from & (~(FIST_ENCODING_BLOCKSIZE - 1));
++	hidden_to = ((to + FIST_ENCODING_BLOCKSIZE - 1) & (~(FIST_ENCODING_BLOCKSIZE - 1)));
++	if ((page->index << PAGE_CACHE_SHIFT) + to > hidden_inode->i_size) {
++
++		/*
++		 * if this call to commit_write had introduced holes and the code
++		 * for handling holes was invoked, then the beginning of this page
++		 * must be zeroed out
++		 * zero out bytes from 'size_of_file%pagesize' to 'from'.
++		 */
++		if ((hidden_from - (inode->i_size & ~PAGE_CACHE_MASK)) > 0)
++			memset((char*)page_address(page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, hidden_from - (inode->i_size & ~PAGE_CACHE_MASK));
++
++	}
++	hidden_bytes = hidden_to - hidden_from;
++
++	/* call lower prepare_write */
++	err = -EINVAL;
++	if (hidden_inode->i_mapping &&
++	    hidden_inode->i_mapping->a_ops &&
++	    hidden_inode->i_mapping->a_ops->prepare_write)
++		err = hidden_inode->i_mapping->a_ops->prepare_write(hidden_file,
++								    hidden_page,
++								    hidden_from,
++								    hidden_to);
++	if (err)
++		/* don't leave locked pages behind, esp. on an ENOSPC */
++		goto out_unlock;
++
++	fist_dprint(8, "%s: encoding %d bytes\n", __FUNCTION__, hidden_bytes);
++	mini_fo_encode_block((char *) page_address(page) + hidden_from, (char*) page_address(hidden_page) + hidden_from, hidden_bytes, inode, inode->i_sb, page->index);
++	/* if encode_block could fail, then goto unlock and return error */
++
++	/* call lower commit_write */
++	err = hidden_inode->i_mapping->a_ops->commit_write(hidden_file,
++							   hidden_page,
++							   hidden_from,
++							   hidden_to);
++
++	if (err < 0)
++		goto out_unlock;
++
++	err = bytes;	/* convert error to no. of bytes */
++
++	inode->i_blocks = hidden_inode->i_blocks;
++	/* we may have to update i_size */
++	pos = (page->index << PAGE_CACHE_SHIFT) + to;
++	if (pos > inode->i_size)
++		inode->i_size = pos;
++
++	/*
++	 * update mtime and ctime of lower level file system
++	 * mini_fo' mtime and ctime are updated by generic_file_write
++	 */
++	hidden_inode->i_mtime = hidden_inode->i_ctime = CURRENT_TIME;
++
++	mark_inode_dirty_sync(inode);
++
++ out_unlock:
++	UnlockPage(hidden_page);
++	page_cache_release(hidden_page);
++	kunmap(page);		/* kmap was done in prepare_write */
++ out:
++	/* we must set our page as up-to-date */
++	if (err < 0)
++		ClearPageUptodate(page);
++	else
++		SetPageUptodate(page);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_inode->i_mutex);
++#else
++	up(&hidden_inode->i_sem);
++#endif
++	print_exit_status(err);
++	return err;			/* assume all is ok */
++}
++
++
++STATIC int
++mini_fo_bmap(struct address_space *mapping, long block)
++{
++	int err = 0;
++	inode_t *inode;
++	inode_t *hidden_inode;
++
++	print_entry_location();
++
++	inode = (inode_t *) mapping->host;
++	hidden_inode = itohi(inode);
++
++	if (hidden_inode->i_mapping->a_ops->bmap)
++		err = hidden_inode->i_mapping->a_ops->bmap(hidden_inode->i_mapping, block);
++	print_exit_location();
++	return err;
++}
++
++
++/*
++ * This function is copied verbatim from mm/filemap.c.
++ * XXX: It should be simply moved to some header file instead -- bug Al about it!
++ */
++static inline int sync_page(struct page *page)
++{
++	struct address_space *mapping = page->mapping;
++
++	if (mapping && mapping->a_ops && mapping->a_ops->sync_page)
++		return mapping->a_ops->sync_page(page);
++	return 0;
++}
++
++
++/*
++ * XXX: we may not need this function if not FIST_FILTER_DATA.
++ * FIXME: for FIST_FILTER_SCA, get all lower pages and sync them each.
++ */
++STATIC int
++mini_fo_sync_page(page_t *page)
++{
++	int err = 0;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	page_t *hidden_page;
++
++	print_entry_location();
++
++	inode = page->mapping->host; /* CPW: Moved below print_entry_location */
++	hidden_inode = itohi(inode);
++
++	/* find lower page (returns a locked page) */
++	hidden_page = grab_cache_page(hidden_inode->i_mapping, page->index);
++	if (!hidden_page)
++		goto out;
++
++	err = sync_page(hidden_page);
++
++	UnlockPage(hidden_page);	/* b/c grab_cache_page locked it */
++	page_cache_release(hidden_page); /* b/c grab_cache_page increased refcnt */
++
++ out:
++	print_exit_status(err);
++	return err;
++}
+--- /dev/null
++++ b/fs/mini_fo/README
+@@ -0,0 +1,163 @@
++README for the mini_fo overlay file system
++=========================================
++
++
++WHAT IS MINI_FO?
++----------------
++
++mini_fo is a virtual kernel file system that can make read-only
++file systems writable. This is done by redirecting modifying operations
++to a writeable location called "storage directory", and leaving the
++original data in the "base directory" untouched. When reading, the
++file system merges the modifed and original data so that only the
++newest versions will appear. This occurs transparently to the user,
++who can access the data like on any other read-write file system.
++
++Base and storage directories may be located on the same or on
++different partitions and may be of different file system types. While
++the storage directory obviously needs to be writable, the base may or
++may not be writable, what doesn't matter as it will no be modified
++anyway.
++
++
++WHAT IS GOOD FOR?
++-----------------
++
++The primary purpose of the mini_fo file system is to allow easy
++software updates to embedded systems, that often store their root
++file system in a read-only flash file system, but there are many
++more as for example sandboxing, or for allowing live-cds to
++permanently store information.
++
++
++BUILDING
++--------
++This should be simple. Adjust the Makefile to point to the correct
++kernel headers you want to build the module for. Then:
++
++    # make
++
++should build "mini_fo.o" for a 2.4 kernel or "mini_fo.ko" for a 2.6
++kernel.
++
++If you are building the module for you current kernel, you can install
++the module (as root):
++
++    # make install
++
++or uninstall with
++
++    # make uninstall
++
++
++USING THE FILE SYSTEM
++--------------------
++
++the general mount syntax is:
++
++   mount -t mini_fo -o base=<base directory>,sto=<storage directory>\
++                            <base directory> <mount point>
++
++Example:
++
++You have mounted a cdrom to /mnt/cdrom and want to modifiy some files
++on it:
++
++load the module (as root)
++
++    # insmod mini_fo.o for a 2.4 kernel or
++
++    # insmod mini_fo.ko for a 2.6 kernel
++
++
++create a storage dir in tmp and a mountpoint for mini_fo:
++
++    # mkdir /tmp/sto
++    # mkdir /mnt/mini_fo
++
++and mount the mini_fo file system:
++
++    # mount -t mini_fo -o base=/mnt/cdrom,sto=/tmp/sto /mnt/cdrom /mnt/mini_fo
++
++
++Now the data stored on the cd can be accessed via the mini_fo
++mountpoint just like any read-write file system, files can be modified
++and deleted, new ones can be created and so on. When done unmount the
++file system:
++
++    # unmount /mnt/mini_fo
++
++Note that if the file system is mounted again using the same storage
++file system, of course it will appear in the modified state again. If
++you remount it using an new empty storage directory, it will be
++unmodified. Therefore by executing:
++
++    # cd /tmp/sto
++    # rm -rf *
++
++you can nuke all the changes you made to the original file system. But
++ remember NEVER do this while the mini_fo file system is mounted!
++
++
++Alternatively you can use the mini_fo-overlay bash script, that
++simplifies managing mini_fo mounts. See TOOLS Section.
++
++
++TOOLS
++-----
++
++mini_fo-merge (experimental):
++
++This is a bash script that will merge changes contained in the storage
++directory back to the base directory. This allows mini_fo to function
++as a cache file system by overlaying a slow (network, ...) file system
++and using a fast (ramdisk, ...) as storage. When done, changes can be
++merged back to the (slow) base with mini_fo-merge. See "mini_fo-merge
++-h" for details.
++
++It can be usefull for merging changes back after a successfull test
++(patches, software updates...)
++
++
++mini_fo-overlay:
++
++This bash script simplifies managing one or more mini_fo mounts. For
++overlaying a directory called "basedir1", you can just call:
++
++    # mini_fo-overlay basedir1
++
++This will mount mini_fo with "basedir1" as base, "/tmp/sto-basedir1/"
++as storage to "/mnt/mini_fo-basedir1/". It has more options though,
++type "mini_fo-overlay -h" for details.
++
++
++DOCUMENTATION, REPORTING BUGS, GETTING HELP
++-------------------------------------------
++
++Please visit the mini_fo project page at:
++
++http://www.denx.de/twiki/bin/view/Know/MiniFOHome
++
++
++WARNINGS
++--------
++
++Never modify the base or the storage directorys while the mini_fo
++file system is mounted, or you might crash you system. Simply accessing
++and reading should not cause any trouble.
++
++Exporting a mini_fo mount point via NFS has not been tested, and may
++or may not work.
++
++Check the RELEASE_NOTES for details on bugs and features.
++
++
++
++Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++
++This program is free software; you can redistribute it and/or
++modify it under the terms of the GNU General Public License
++as published by the Free Software Foundation; either version
++2 of the License, or (at your option) any later version.
++
++
+--- /dev/null
++++ b/fs/mini_fo/RELEASE_NOTES
+@@ -0,0 +1,111 @@
++Release:	mini_fo-0.6.1 (v0-6-1)
++Date:		21.09.2005
++
++
++Changes:
++--------
++v0-6-1:
++
++- bugfixes (see ChangeLog)
++
++- two helper scripts "mini_fo_merge" and "mini_fo_overlay" (see
++  README for details).
++
++v0-6-0:
++
++- Support for 2.4 and 2.6 (see Makefile)
++
++- Partial hard link support (creating works as expected, but already
++  existing links in the base file system will be treated as if they
++  were individual files).
++
++- Various bugfixes and cleanups.
++
++
++v0-6-0-pre1:
++
++- This is mini_fo-0-6-0-pre1! This release is a complete rewrite of
++  many vital mini_fo parts such as the old whiteout list code which
++  has been replaced by the new META subsystem.
++
++- Light weight directory renaming implemented. This means if a
++  directory is renamed via the mini_fo filesystem this will no longer
++  result in a complete copy in storage, instead only one empty
++  directory will be created. All base filed contained in the original
++  directory stay there until modified.
++
++- Special files (creating, renaming, deleting etc.) now working.
++
++- Many bugfixes and cleanup, mini_fo is now a lot more stable.
++
++
++v0-5-10:
++
++- Final release of the 0-5-* versions. Next will be a complete rewrite
++  of many features. This release contains several bugfixes related to
++  directory renaming.
++
++
++v0-5-10-pre6:
++
++- Lots of cleanup and several bugfixes related to directory deleting
++
++- Directory renaming suddenly works, what is most likely due to the
++  fact tha that "mv" is smart: if the classic rename doesn't work it
++  will assume that source and target file are on different fs and will
++  copy the directory and try to remove the source directory. Until
++  directory removing wasn't implemented, it would fail to do this and
++  rollback.
++  So, directory renaming works for now, but it doesn't yet do what you
++  would expect from a overlay fs, so use with care.
++
++
++v0-5-10-pre5:
++
++- implemented directory deleting
++- made parsing of mount options more stable
++- New format of mount options! (See README)
++- I can't reproduce the unknown panic with 2.4.25 anymore, so I'll
++  happily assume it never existed!
++
++
++Implemented features:
++---------------------
++
++- creating hard links (see BUGS on already existing hard links)
++- lightweight directory renaming
++- renaming device files, pipes, sockets, etc.
++- creating, renaming, deleting of special files
++- deleting directorys
++- general directory reading (simple "ls" )
++- creating files in existing directorys
++- creating directorys
++- renaming files.
++- reading and writing files (involves opening)
++- appending to files (creates copy in storage)
++- deleting files
++- llseek works too, what allows editors to work
++- persistency (a deleted file stay deleted over remounts)
++- use of symbolic links
++- creating of device files
++
++
++Not (yet) implemented features:
++-------------------------------
++
++- full hard link support.
++
++
++
++BUGS:
++-----
++
++Hard links in the base file system will be treated as individual
++files, not as links to one inode.
++
++The main problem with hard links isn't allowing to create them, but
++their pure existence. If you modify a base hard link, the changes made
++will only show up on this link, the other link will remain in the
++original state. I hope to fix this someday. Please note that this does
++not effect the special hard links '.' and '..', that are handled
++seperately by the lower fs.
+--- /dev/null
++++ b/fs/mini_fo/state.c
+@@ -0,0 +1,620 @@
++/*
++ * Copyright (C) 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif /* HAVE_CONFIG_H */
++
++#include "fist.h"
++#include "mini_fo.h"
++
++
++/* create the storage file, setup new states */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++int create_sto_reg_file(dentry_t *dentry, int mode, struct nameidata *nd)
++#else
++int create_sto_reg_file(dentry_t *dentry, int mode)
++#endif
++{
++	int err = 0;
++	inode_t *dir;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++
++	if(exists_in_storage(dentry)) {
++		printk(KERN_CRIT "mini_fo: create_sto_file: wrong type or state.\n");
++		err = -EINVAL;
++		goto out;
++	}
++	err = get_neg_sto_dentry(dentry);
++
++	if (err) {
++		printk(KERN_CRIT "mini_fo: create_sto_file: ERROR getting neg. sto dentry.\n");
++		goto out;
++	}
++
++	dir = dentry->d_parent->d_inode;
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* lock parent */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++        down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = PTR_ERR(hidden_sto_dir_dentry);
++        if (IS_ERR(hidden_sto_dir_dentry))
++                goto out;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	err = vfs_create(hidden_sto_dir_dentry->d_inode,
++			 hidden_sto_dentry,
++			 mode, nd);
++#else
++	err = vfs_create(hidden_sto_dir_dentry->d_inode,
++			 hidden_sto_dentry,
++			 mode);
++#endif
++        if(err) {
++		printk(KERN_CRIT "mini_fo: create_sto_file: ERROR creating sto file.\n");
++                goto out_lock;
++	}
++
++	if(!dtohd2(dentry)->d_inode) {
++		printk(KERN_CRIT "mini_fo: create_sto_file: ERROR creating sto file [2].\n");
++                err = -EINVAL;
++                goto out_lock;
++        }
++
++        /* interpose the new inode */
++        if(dtost(dentry) == DELETED) {
++                dtost(dentry) = DEL_REWRITTEN;
++                err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0);
++                if(err)
++                        goto out_lock;
++        }
++        else if(dtost(dentry) == NON_EXISTANT) {
++                dtost(dentry) = CREATED;
++                err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0);
++                if(err)
++                        goto out_lock;
++        }
++        else if(dtost(dentry) == UNMODIFIED) {
++                dtost(dentry) = MODIFIED;
++                /* interpose on new inode */
++                if(itohi2(dentry->d_inode) != NULL) {
++                        printk(KERN_CRIT "mini_fo: create_sto_file: invalid inode detected.\n");
++                        err = -EINVAL;
++                        goto out_lock;
++                }
++                itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++	}
++	fist_copy_attr_timesizes(dentry->d_parent->d_inode,
++				 hidden_sto_dir_dentry->d_inode);
++
++ out_lock:
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++        dput(hidden_sto_dir_dentry);
++ out:
++	return err;
++}
++
++/* create the sto dir, setup states */
++int create_sto_dir(dentry_t *dentry, int mode)
++{
++	int err = 0;
++	inode_t *dir;
++	dentry_t *hidden_sto_dentry;
++        dentry_t *hidden_sto_dir_dentry;
++
++	/* had to take the "!S_ISDIR(mode))" check out, because it failed */
++	if(exists_in_storage(dentry)) {
++                printk(KERN_CRIT "mini_fo: create_sto_dir: wrong type or state.\\
++n");
++                err = -EINVAL;
++                goto out;
++        }
++
++	err = get_neg_sto_dentry(dentry);
++	if(err) {
++		err = -EINVAL;
++		goto out;
++	}
++
++	dir = dentry->d_parent->d_inode;
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = PTR_ERR(hidden_sto_dir_dentry);
++	if (IS_ERR(hidden_sto_dir_dentry))
++		goto out;
++
++	err = vfs_mkdir(hidden_sto_dir_dentry->d_inode,
++			hidden_sto_dentry,
++			mode);
++	if(err) {
++		printk(KERN_CRIT "mini_fo: create_sto_dir: ERROR creating sto dir.\n");
++		goto out_lock;
++	}
++
++	if(!dtohd2(dentry)->d_inode) {
++		printk(KERN_CRIT "mini_fo: create_sto_dir: ERROR creating sto dir [2].\n");
++		err = -EINVAL;
++		goto out_lock;
++	}
++
++	/* interpose the new inode */
++	if(dtost(dentry) == DELETED) {
++		dtost(dentry) = DEL_REWRITTEN;
++		err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0);
++		if(err)
++			goto out_lock;
++	}
++	else if(dtopd(dentry)->state == NON_EXISTANT) {
++		dtopd(dentry)->state = CREATED;
++		err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0);
++		if(err)
++			goto out_lock;
++	}
++	else if(dtopd(dentry)->state == UNMODIFIED) {
++		dtopd(dentry)->state = MODIFIED;
++		/* interpose on new inode */
++		if(itohi2(dentry->d_inode) != NULL) {
++			printk(KERN_CRIT "mini_fo:  create_sto_dir: ERROR, invalid inode detected.\n");
++			err = -EINVAL;
++			goto out_lock;
++		}
++		itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++	}
++
++	fist_copy_attr_timesizes(dir, hidden_sto_dir_dentry->d_inode);
++
++	/* initalize the wol list */
++	itopd(dentry->d_inode)->deleted_list_size = -1;
++	itopd(dentry->d_inode)->renamed_list_size = -1;
++	meta_build_lists(dentry);
++
++
++ out_lock:
++	/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++ out:
++	return err;
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++int create_sto_nod(dentry_t *dentry, int mode, dev_t dev)
++#else
++int create_sto_nod(dentry_t *dentry, int mode, int dev)
++#endif
++{
++	int err = 0;
++	inode_t *dir;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++
++	if(exists_in_storage(dentry)) {
++		err = -EEXIST;
++		goto out;
++	}
++	err = get_neg_sto_dentry(dentry);
++
++	if (err) {
++                printk(KERN_CRIT "mini_fo: create_sto_nod: ERROR getting neg. sto dentry.\n");
++                goto out;
++        }
++
++	dir = dentry->d_parent->d_inode;
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* lock parent */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = PTR_ERR(hidden_sto_dir_dentry);
++	if (IS_ERR(hidden_sto_dir_dentry))
++		goto out;
++
++	err = vfs_mknod(hidden_sto_dir_dentry->d_inode, hidden_sto_dentry, mode, dev);
++	if(err)
++		goto out_lock;
++
++	if(!dtohd2(dentry)->d_inode) {
++		printk(KERN_CRIT "mini_fo: create_sto_nod: creating storage inode failed [1].\n");
++		err = -EINVAL; /* return something indicating failure */
++		goto out_lock;
++	}
++
++	/* interpose the new inode */
++	if(dtost(dentry) == DELETED) {
++		dtost(dentry) = DEL_REWRITTEN;
++		err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0);
++		if(err)
++			goto out_lock;
++	}
++	else if(dtost(dentry) == NON_EXISTANT) {
++		dtost(dentry) = CREATED;
++		err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0);
++		if(err)
++			goto out_lock;
++	}
++	else if(dtost(dentry) == UNMODIFIED) {
++		dtost(dentry) = MODIFIED;
++		/* interpose on new inode */
++		if(itohi2(dentry->d_inode) != NULL) {
++			printk(KERN_CRIT "mini_fo: create_sto_nod: error, invalid inode detected.\n");
++			err = -EINVAL;
++			goto out_lock;
++		}
++		itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++	}
++
++	fist_copy_attr_timesizes(dir, hidden_sto_dir_dentry->d_inode);
++
++ out_lock:
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++ out:
++	return err;
++}
++
++
++/* unimplemented (and possibly not usefull):
++
++   nondir-del_to_del_rew
++   nondir-non_exist_to_creat
++
++   dir-unmod_to_del
++   dir-mod_to_del
++   dir-creat_to_del
++   dir-del_rew_to_del
++   dir-del_to_del_rew
++   dir-non_exist_to_creat
++*/
++
++
++/* bring a file of any type from state UNMODIFIED to MODIFIED */
++int nondir_unmod_to_mod(dentry_t *dentry, int cp_flag)
++{
++	int err = 0;
++	struct vfsmount *tgt_mnt;
++	struct vfsmount *src_mnt;
++	dentry_t *tgt_dentry;
++	dentry_t *src_dentry;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++
++	check_mini_fo_dentry(dentry);
++
++	if((dtost(dentry) != UNMODIFIED) ||
++	   S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++	err = get_neg_sto_dentry(dentry);
++
++	if (err) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                  ERROR getting neg. sto dentry.\n");
++		goto out;
++	}
++
++	/* create sto file */
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* lock parent */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++        down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = PTR_ERR(hidden_sto_dir_dentry);
++        if (IS_ERR(hidden_sto_dir_dentry))
++                goto out;
++
++	/* handle different types of nondirs */
++	if(S_ISCHR(dentry->d_inode->i_mode) ||
++	   S_ISBLK(dentry->d_inode->i_mode)) {
++		err = vfs_mknod(hidden_sto_dir_dentry->d_inode,
++				hidden_sto_dentry,
++				dtohd(dentry)->d_inode->i_mode,
++				dtohd(dentry)->d_inode->i_rdev);
++	}
++
++	else if(S_ISREG(dentry->d_inode->i_mode)) {
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		err = vfs_create(hidden_sto_dir_dentry->d_inode,
++				 hidden_sto_dentry,
++				 dtohd(dentry)->d_inode->i_mode, NULL);
++#else
++		err = vfs_create(hidden_sto_dir_dentry->d_inode,
++				 hidden_sto_dentry,
++				 dtohd(dentry)->d_inode->i_mode);
++#endif
++	}
++        if(err) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                  ERROR creating sto file.\n");
++                goto out_lock;
++	}
++
++	/* interpose on new inode */
++	if(itohi2(dentry->d_inode) != NULL) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                  ERROR, invalid inode detected.\n");
++		err = -EINVAL;
++		goto out_lock;
++	}
++
++	itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++
++        fist_copy_attr_timesizes(dentry->d_parent->d_inode,
++				 hidden_sto_dir_dentry->d_inode);
++	dtost(dentry) = MODIFIED;
++
++	/* copy contents if regular file and cp_flag = 1 */
++	if((cp_flag == 1) && S_ISREG(dentry->d_inode->i_mode)) {
++
++		/* unlock first */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++		dput(hidden_sto_dir_dentry);
++
++		tgt_dentry = dtohd2(dentry);
++		tgt_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++		src_dentry = dtohd(dentry);
++		src_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt;
++
++		err = mini_fo_cp_cont(tgt_dentry, tgt_mnt,
++				      src_dentry, src_mnt);
++		if(err) {
++			printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                          ERROR copying contents.\n");
++		}
++		goto out;
++	}
++
++ out_lock:
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++        dput(hidden_sto_dir_dentry);
++ out:
++	return err;
++}
++
++/* this function is currently identical to nondir_creat_to_del */
++int nondir_del_rew_to_del(dentry_t *dentry)
++{
++	return nondir_creat_to_del(dentry);
++}
++
++int nondir_creat_to_del(dentry_t *dentry)
++{
++	int err = 0;
++
++	inode_t *hidden_sto_dir_inode;
++	dentry_t *hidden_sto_dir_dentry;
++	dentry_t *hidden_sto_dentry;
++
++	check_mini_fo_dentry(dentry);
++
++	/* for now this function serves for both state DEL_REWRITTEN and
++	 * CREATED */
++	if(!(dtost(dentry) == CREATED || (dtost(dentry) == DEL_REWRITTEN)) ||
++	   S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: nondir_mod_to_del/del_rew_to_del: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++
++	hidden_sto_dir_inode = itohi2(dentry->d_parent->d_inode);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry);*/
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	/* avoid destroying the hidden inode if the file is in use */
++	dget(hidden_sto_dentry);
++	err = vfs_unlink(hidden_sto_dir_inode, hidden_sto_dentry);
++	dput(hidden_sto_dentry);
++	if(!err)
++		d_delete(hidden_sto_dentry);
++
++	/* propagate number of hard-links */
++	dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++
++	dtost(dentry) = NON_EXISTANT;
++
++	/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++
++ out:
++	return err;
++}
++
++int nondir_mod_to_del(dentry_t *dentry)
++{
++	int err;
++	dentry_t *hidden_sto_dentry;
++	inode_t *hidden_sto_dir_inode;
++	dentry_t *hidden_sto_dir_dentry;
++
++	check_mini_fo_dentry(dentry);
++
++	if(dtost(dentry) != MODIFIED ||
++	   S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: nondir_mod_to_del: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++
++	hidden_sto_dir_inode = itohi2(dentry->d_parent->d_inode);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* was hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	/* avoid destroying the hidden inode if the file is in use */
++	dget(hidden_sto_dentry);
++	err = vfs_unlink(hidden_sto_dir_inode, hidden_sto_dentry);
++	dput(hidden_sto_dentry);
++	if(!err)
++		d_delete(hidden_sto_dentry);
++
++	/* propagate number of hard-links */
++	dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++
++	/* dput base dentry, this will relase the inode and free the
++	 * dentry, as we will never need it again. */
++	dput(dtohd(dentry));
++	dtohd(dentry) = NULL;
++	dtost(dentry) = DELETED;
++
++	/* add deleted file to META-file */
++	meta_add_d_entry(dentry->d_parent,
++			 dentry->d_name.name,
++			 dentry->d_name.len);
++
++	/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++
++ out:
++	return err;
++}
++
++int nondir_unmod_to_del(dentry_t *dentry)
++{
++	int err = 0;
++
++	check_mini_fo_dentry(dentry);
++
++	if(dtost(dentry) != UNMODIFIED ||
++	   S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_del: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++
++	 /* next we have to get a negative dentry for the storage file */
++	err = get_neg_sto_dentry(dentry);
++
++	if(err)
++		goto out;
++
++	/* add deleted file to META lists */
++	err = meta_add_d_entry(dentry->d_parent,
++			       dentry->d_name.name,
++			       dentry->d_name.len);
++
++	if(err)
++		goto out;
++
++	/* dput base dentry, this will relase the inode and free the
++	 * dentry, as we will never need it again. */
++	dput(dtohd(dentry));
++	dtohd(dentry) = NULL;
++	dtost(dentry) = DELETED;
++
++ out:
++	return err;
++}
++
++/* bring a dir from state UNMODIFIED to MODIFIED */
++int dir_unmod_to_mod(dentry_t *dentry)
++{
++	int err;
++
++	check_mini_fo_dentry(dentry);
++
++	if(dtost(dentry) != UNMODIFIED ||
++	   !S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: dir_unmod_to_mod: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++
++	/* this creates our dir incl. sto. structure */
++	err = build_sto_structure(dentry->d_parent, dentry);
++	if(err) {
++		printk(KERN_CRIT "mini_fo: dir_unmod_to_mod: \
++                                  build_sto_structure failed.\n");
++		goto out;
++	}
++ out:
++	return err;
++}
++
+--- /dev/null
++++ b/fs/mini_fo/super.c
+@@ -0,0 +1,281 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++
++
++STATIC void
++mini_fo_read_inode(inode_t *inode)
++{
++	static struct address_space_operations mini_fo_empty_aops;
++
++	__itopd(inode) = kmalloc(sizeof(struct mini_fo_inode_info), GFP_KERNEL);
++	if (!itopd(inode)) {
++		printk("<0>%s:%s:%d: No kernel memory!\n", __FILE__, __FUNCTION__, __LINE__);
++		ASSERT(NULL);
++	}
++	itohi(inode) = NULL;
++	itohi2(inode) = NULL;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	inode->i_version++;
++#else
++	inode->i_version = ++event;	/* increment inode version */
++#endif
++	inode->i_op = &mini_fo_main_iops;
++	inode->i_fop = &mini_fo_main_fops;
++#if 0
++	/*
++	 * XXX: To export a file system via NFS, it has to have the
++	 * FS_REQUIRES_DEV flag, so turn it on.  But should we inherit it from
++	 * the lower file system, or can we allow our file system to be exported
++	 * even if the lower one cannot be natively exported.
++	 */
++	inode->i_sb->s_type->fs_flags |= FS_REQUIRES_DEV;
++	/*
++	 * OK, the above was a hack, which is now turned off because it may
++	 * cause a panic/oops on some systems.  The correct way to export a
++	 * "nodev" filesystem is via using nfs-utils > 1.0 and the "fsid=" export
++	 * parameter, which requires 2.4.20 or later.
++	 */
++#endif
++	/* I don't think ->a_ops is ever allowed to be NULL */
++	inode->i_mapping->a_ops = &mini_fo_empty_aops;
++}
++
++
++#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
++/*
++ * No need to call write_inode() on the lower inode, as it
++ * will have been marked 'dirty' anyway. But we might need
++ * to write some of our own stuff to disk.
++ */
++STATIC void
++mini_fo_write_inode(inode_t *inode, int sync)
++{
++	print_entry_location();
++	print_exit_location();
++}
++#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++
++
++STATIC void
++mini_fo_put_inode(inode_t *inode)
++{
++	/*
++	 * This is really funky stuff:
++	 * Basically, if i_count == 1, iput will then decrement it and this inode will be destroyed.
++	 * It is currently holding a reference to the hidden inode.
++	 * Therefore, it needs to release that reference by calling iput on the hidden inode.
++	 * iput() _will_ do it for us (by calling our clear_inode), but _only_ if i_nlink == 0.
++	 * The problem is, NFS keeps i_nlink == 1 for silly_rename'd files.
++	 * So we must for our i_nlink to 0 here to trick iput() into calling our clear_inode.
++	 */
++	if (atomic_read(&inode->i_count) == 1)
++		inode->i_nlink = 0;
++}
++
++
++#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
++/*
++ * we now define delete_inode, because there are two VFS paths that may
++ * destroy an inode: one of them calls clear inode before doing everything
++ * else that's needed, and the other is fine.  This way we truncate the inode
++ * size (and its pages) and then clear our own inode, which will do an iput
++ * on our and the lower inode.
++ */
++STATIC void
++mini_fo_delete_inode(inode_t *inode)
++{
++	print_entry_location();
++
++	fist_checkinode(inode, "mini_fo_delete_inode IN");
++	inode->i_size = 0;		/* every f/s seems to do that */
++	clear_inode(inode);
++
++	print_exit_location();
++}
++#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++
++
++/* final actions when unmounting a file system */
++STATIC void
++mini_fo_put_super(super_block_t *sb)
++{
++	if (stopd(sb)) {
++		mntput(stopd(sb)->hidden_mnt);
++		mntput(stopd(sb)->hidden_mnt2);
++
++		/* mk: no! dput(stopd(sb)->base_dir_dentry);
++		   dput(stopd(sb)->storage_dir_dentry); */
++
++		kfree(stopd(sb));
++		__stopd(sb) = NULL;
++	}
++}
++
++
++#ifdef NOT_NEEDED
++/*
++ * This is called in do_umount before put_super.
++ * The superblock lock is not held yet.
++ * We probably do not need to define this or call write_super
++ * on the hidden_sb, because sync_supers() will get to hidden_sb
++ * sooner or later.  But it is also called from file_fsync()...
++ */
++STATIC void
++mini_fo_write_super(super_block_t *sb)
++{
++	return;
++}
++#endif /* NOT_NEEDED */
++
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++mini_fo_statfs(struct dentry *d, struct kstatfs *buf)
++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_statfs(super_block_t *sb, struct kstatfs *buf)
++#else
++mini_fo_statfs(super_block_t *sb, struct statfs *buf)
++#endif
++{
++	int err = 0;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++	struct dentry *hidden_d;
++
++	hidden_d = dtohd(d);
++	err = vfs_statfs(hidden_d, buf);
++#else
++	super_block_t *hidden_sb;
++
++	hidden_sb = stohs(sb);
++	err = vfs_statfs(hidden_sb, buf);
++#endif
++
++	return err;
++}
++
++
++/*
++ * XXX: not implemented.  This is not allowed yet.
++ * Should we call this on the hidden_sb?  Probably not.
++ */
++STATIC int
++mini_fo_remount_fs(super_block_t *sb, int *flags, char *data)
++{
++	//printk(KERN_CRIT "mini_fo_remount_fs: WARNING, this function is umimplemented.\n");
++	return -ENOSYS;
++}
++
++
++/*
++ * Called by iput() when the inode reference count reached zero
++ * and the inode is not hashed anywhere.  Used to clear anything
++ * that needs to be, before the inode is completely destroyed and put
++ * on the inode free list.
++ */
++STATIC void
++mini_fo_clear_inode(inode_t *inode)
++{
++	/*
++	 * Decrement a reference to a hidden_inode, which was incremented
++	 * by our read_inode when it was created initially.
++	 */
++
++	/* release the wol_list */
++	if(S_ISDIR(inode->i_mode)) {
++		__meta_put_lists(inode);
++	}
++
++	/* mk: fan out fun */
++	if(itohi(inode))
++		iput(itohi(inode));
++	if(itohi2(inode))
++		iput(itohi2(inode));
++
++	// XXX: why this assertion fails?
++	// because it doesn't like us
++	// ASSERT((inode->i_state & I_DIRTY) == 0);
++	kfree(itopd(inode));
++	__itopd(inode) = NULL;
++}
++
++
++/*
++ * Called in do_umount() if the MNT_FORCE flag was used and this
++ * function is defined.  See comment in linux/fs/super.c:do_umount().
++ * Used only in nfs, to kill any pending RPC tasks, so that subsequent
++ * code can actually succeed and won't leave tasks that need handling.
++ *
++ * PS. I wonder if this is somehow useful to undo damage that was
++ * left in the kernel after a user level file server (such as amd)
++ * dies.
++ */
++STATIC void
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++mini_fo_umount_begin(struct vfsmount *mnt, int flags)
++{
++	struct vfsmount *hidden_mnt;
++
++	hidden_mnt = stopd(mnt->mnt_sb)->hidden_mnt;
++
++	if (hidden_mnt->mnt_sb->s_op->umount_begin)
++		hidden_mnt->mnt_sb->s_op->umount_begin(hidden_mnt, flags);
++
++}
++#else
++mini_fo_umount_begin(super_block_t *sb)
++{
++	super_block_t *hidden_sb;
++
++	hidden_sb = stohs(sb);
++
++	if (hidden_sb->s_op->umount_begin)
++		hidden_sb->s_op->umount_begin(hidden_sb);
++
++}
++#endif
++
++
++struct super_operations mini_fo_sops =
++{
++	read_inode:		mini_fo_read_inode,
++#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
++	write_inode:	mini_fo_write_inode,
++#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++	put_inode:		mini_fo_put_inode,
++#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
++	delete_inode:	mini_fo_delete_inode,
++#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++	put_super:		mini_fo_put_super,
++	statfs:		mini_fo_statfs,
++	remount_fs:		mini_fo_remount_fs,
++	clear_inode:	mini_fo_clear_inode,
++	umount_begin:	mini_fo_umount_begin,
++};
+--- /dev/null
++++ b/fs/mini_fo/Kconfig
+@@ -0,0 +1,3 @@
++config MINI_FO
++	tristate "Mini fanout overlay filesystem"
++
diff --git a/target/linux/generic/patches-2.6.31/210-mini_fo_2.6.25_fixes.patch b/target/linux/generic/patches-2.6.31/210-mini_fo_2.6.25_fixes.patch
new file mode 100644
index 0000000000..b64630d500
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/210-mini_fo_2.6.25_fixes.patch
@@ -0,0 +1,143 @@
+--- a/fs/mini_fo/main.c
++++ b/fs/mini_fo/main.c
+@@ -79,6 +79,7 @@ mini_fo_tri_interpose(dentry_t *hidden_d
+ 	 * of the new inode's fields
+ 	 */
+ 
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,25)
+ 	/*
+ 	 * original: inode = iget(sb, hidden_inode->i_ino);
+ 	 */
+@@ -87,6 +88,13 @@ mini_fo_tri_interpose(dentry_t *hidden_d
+ 		err = -EACCES;		/* should be impossible??? */
+ 		goto out;
+ 	}
++#else
++	inode = mini_fo_iget(sb, iunique(sb, 25));
++	if (IS_ERR(inode)) {
++		err = PTR_ERR(inode);
++		goto out;
++	}
++#endif
+ 
+ 	/*
+ 	 * interpose the inode if not already interposed
+@@ -184,9 +192,9 @@ mini_fo_parse_options(super_block_t *sb,
+ 				hidden_root = ERR_PTR(err);
+ 				goto out;
+ 			}
+-			hidden_root = nd.dentry;
+-			stopd(sb)->base_dir_dentry = nd.dentry;
+-			stopd(sb)->hidden_mnt = nd.mnt;
++			hidden_root = nd_get_dentry(&nd);
++			stopd(sb)->base_dir_dentry = nd_get_dentry(&nd);
++			stopd(sb)->hidden_mnt = nd_get_mnt(&nd);
+ 
+ 		} else if(!strncmp("sto=", options, 4)) {
+ 			/* parse the storage dir */
+@@ -204,9 +212,9 @@ mini_fo_parse_options(super_block_t *sb,
+ 				hidden_root2 = ERR_PTR(err);
+ 				goto out;
+ 			}
+-			hidden_root2 = nd2.dentry;
+-			stopd(sb)->storage_dir_dentry = nd2.dentry;
+-			stopd(sb)->hidden_mnt2 = nd2.mnt;
++			hidden_root2 = nd_get_dentry(&nd2);
++			stopd(sb)->storage_dir_dentry = nd_get_dentry(&nd2);
++			stopd(sb)->hidden_mnt2 = nd_get_mnt(&nd2);
+ 			stohs2(sb) = hidden_root2->d_sb;
+ 
+ 			/* validate storage dir, this is done in
+--- a/fs/mini_fo/mini_fo.h
++++ b/fs/mini_fo/mini_fo.h
+@@ -302,6 +302,10 @@ extern int mini_fo_tri_interpose(dentry_
+ extern int mini_fo_cp_cont(dentry_t *tgt_dentry, struct vfsmount *tgt_mnt,
+ 			   dentry_t *src_dentry, struct vfsmount *src_mnt);
+ 
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25)
++extern struct inode *mini_fo_iget(struct super_block *sb, unsigned long ino);
++#endif
++
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+ extern int mini_fo_create(inode_t *dir, dentry_t *dentry, int mode, struct nameidata *nd);
+ 
+@@ -501,6 +505,29 @@ static inline void double_unlock(struct
+ #endif  /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) */
+ #endif /* __KERNEL__ */
+ 
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25)
++static inline dentry_t *nd_get_dentry(struct nameidata *nd)
++{
++	return (nd->path.dentry);
++}
++
++static inline struct vfsmount *nd_get_mnt(struct nameidata *nd)
++{
++	return (nd->path.mnt);
++}
++#else
++static inline dentry_t *nd_get_dentry(struct nameidata *nd)
++{
++	return (nd->dentry);
++}
++
++static inline struct vfsmount *nd_get_mnt(struct nameidata *nd)
++{
++	return (nd->mnt);
++}
++#endif
++
+ /*
+  * Definitions for user and kernel code
+  */
+--- a/fs/mini_fo/super.c
++++ b/fs/mini_fo/super.c
+@@ -262,10 +262,31 @@ mini_fo_umount_begin(super_block_t *sb)
+ }
+ #endif
+ 
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25)
++struct inode *
++mini_fo_iget(struct super_block *sb, unsigned long ino)
++{
++	struct inode *inode;
++
++	inode = iget_locked(sb, ino);
++	if (!inode)
++		return ERR_PTR(-ENOMEM);
++
++	if (!(inode->i_state & I_NEW))
++		return inode;
++
++	mini_fo_read_inode(inode);
++
++	unlock_new_inode(inode);
++	return inode;
++}
++#endif /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25) */
+ 
+ struct super_operations mini_fo_sops =
+ {
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,25)
+ 	read_inode:		mini_fo_read_inode,
++#endif
+ #if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
+ 	write_inode:	mini_fo_write_inode,
+ #endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
+--- a/fs/mini_fo/aux.c
++++ b/fs/mini_fo/aux.c
+@@ -164,11 +164,11 @@ dentry_t *bpath_walk(super_block_t *sb,
+ 	err = vfs_path_lookup(mnt->mnt_root, mnt, bpath+1, 0, &nd);
+ 
+ 	/* validate */
+-	if (err || !nd.dentry || !nd.dentry->d_inode) {
++	if (err || !nd_get_dentry(&nd) || !nd_get_dentry(&nd)->d_inode) {
+ 		printk(KERN_CRIT "mini_fo: bpath_walk: path_walk failed.\n");
+ 		return NULL;
+ 	}
+-	return nd.dentry;
++	return nd_get_dentry(&nd);
+ }
+ 
+ 
diff --git a/target/linux/generic/patches-2.6.31/211-mini_fo_2.6.25_dentry_open_war.patch b/target/linux/generic/patches-2.6.31/211-mini_fo_2.6.25_dentry_open_war.patch
new file mode 100644
index 0000000000..48a19429b9
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/211-mini_fo_2.6.25_dentry_open_war.patch
@@ -0,0 +1,66 @@
+--- a/fs/mini_fo/meta.c
++++ b/fs/mini_fo/meta.c
+@@ -442,6 +442,11 @@ int meta_write_d_entry(dentry_t *dentry,
+ 			   S_IRUSR | S_IWUSR);
+ #endif
+ 	}
++
++	/* $%& err, is this correct? */
++	meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++	mntget(meta_mnt);
++
+         /* open META-file for writing */
+         meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
+         if(!meta_file || IS_ERR(meta_file)) {
+@@ -535,6 +540,11 @@ int meta_write_r_entry(dentry_t *dentry,
+ 			   meta_dentry, S_IRUSR | S_IWUSR);
+ #endif
+ 	}
++
++	/* $%& err, is this correct? */
++	meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++	mntget(meta_mnt);
++
+         /* open META-file for writing */
+         meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
+         if(!meta_file || IS_ERR(meta_file)) {
+@@ -671,14 +681,16 @@ int meta_sync_d_list(dentry_t *dentry, i
+ 		}
+ 	}
+ 
++	/* $%& err, is this correct? */
++	meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++	mntget(meta_mnt);
++
+         /* open META-file for writing */
+         meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
+                                   ERROR opening meta file.\n");
+-		/* we don't mntget so we dont't mntput (for now)
+-		 * mntput(meta_mnt);
+-		 */
++		mntput(meta_mnt);
+ 		dput(meta_dentry);
+ 		err = -1;
+                 goto out;
+@@ -811,14 +823,16 @@ int meta_sync_r_list(dentry_t *dentry, i
+ 		}
+ 	}
+ 
++	/* $%& err, is this correct? */
++	meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++	mntget(meta_mnt);
++
+         /* open META-file for writing */
+         meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
+                                   ERROR opening meta file.\n");
+-		/* we don't mntget so we dont't mntput (for now)
+-		 * mntput(meta_mnt);
+-		 */
++		mntput(meta_mnt);
+ 		dput(meta_dentry);
+ 		err = -1;
+                 goto out;
diff --git a/target/linux/generic/patches-2.6.31/212-mini_fo_2.6.26_fixes.patch b/target/linux/generic/patches-2.6.31/212-mini_fo_2.6.26_fixes.patch
new file mode 100644
index 0000000000..b5fa64e6a1
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/212-mini_fo_2.6.26_fixes.patch
@@ -0,0 +1,37 @@
+--- a/fs/mini_fo/super.c
++++ b/fs/mini_fo/super.c
+@@ -84,6 +84,7 @@ mini_fo_write_inode(inode_t *inode, int
+ #endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
+ 
+ 
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)
+ STATIC void
+ mini_fo_put_inode(inode_t *inode)
+ {
+@@ -99,6 +100,7 @@ mini_fo_put_inode(inode_t *inode)
+ 	if (atomic_read(&inode->i_count) == 1)
+ 		inode->i_nlink = 0;
+ }
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26) */
+ 
+ 
+ #if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
+@@ -238,7 +240,7 @@ mini_fo_clear_inode(inode_t *inode)
+  * dies.
+  */
+ STATIC void
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26))
+ mini_fo_umount_begin(struct vfsmount *mnt, int flags)
+ {
+ 	struct vfsmount *hidden_mnt;
+@@ -290,7 +292,9 @@ struct super_operations mini_fo_sops =
+ #if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
+ 	write_inode:	mini_fo_write_inode,
+ #endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)
+ 	put_inode:		mini_fo_put_inode,
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26) */
+ #if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
+ 	delete_inode:	mini_fo_delete_inode,
+ #endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
diff --git a/target/linux/generic/patches-2.6.31/213-mini_fo_2.6.27_fixes.patch b/target/linux/generic/patches-2.6.31/213-mini_fo_2.6.27_fixes.patch
new file mode 100644
index 0000000000..f92c18b254
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/213-mini_fo_2.6.27_fixes.patch
@@ -0,0 +1,41 @@
+--- a/fs/mini_fo/inode.c
++++ b/fs/mini_fo/inode.c
+@@ -439,7 +439,7 @@ mini_fo_symlink(inode_t *dir, dentry_t *
+ 	int err=0;
+ 	dentry_t *hidden_sto_dentry;
+ 	dentry_t *hidden_sto_dir_dentry;
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27))
+         umode_t mode;
+ #endif
+ 
+@@ -466,7 +466,7 @@ mini_fo_symlink(inode_t *dir, dentry_t *
+ 	down(&hidden_sto_dir_dentry->d_inode->i_sem);
+ #endif
+ 
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27))
+ 	mode = S_IALLUGO;
+ 	err = vfs_symlink(hidden_sto_dir_dentry->d_inode,
+ 			  hidden_sto_dentry, symname, mode);
+@@ -1128,7 +1128,7 @@ void mini_fo_put_link(struct dentry *den
+ #endif
+ 
+ STATIC int
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27))
+ mini_fo_permission(inode_t *inode, int mask, struct nameidata *nd)
+ #else
+ mini_fo_permission(inode_t *inode, int mask)
+@@ -1150,8 +1150,9 @@ mini_fo_permission(inode_t *inode, int m
+ 	 *	if (err)
+ 	 *		goto out;
+ 	 */
+-
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
++	err = inode_permission(hidden_inode, mask);
++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+ 	err = permission(hidden_inode, mask, nd);
+ #else
+ 	err = permission(hidden_inode, mask);
diff --git a/target/linux/generic/patches-2.6.31/214-mini_fo_2.6.29.patch b/target/linux/generic/patches-2.6.31/214-mini_fo_2.6.29.patch
new file mode 100644
index 0000000000..63d704bf51
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/214-mini_fo_2.6.29.patch
@@ -0,0 +1,96 @@
+--- a/fs/mini_fo/aux.c
++++ b/fs/mini_fo/aux.c
+@@ -236,7 +236,7 @@ int mini_fo_cp_cont(dentry_t *tgt_dentry
+ 	mntget(src_mnt);
+ 
+ 	/* open file write only */
+-	tgt_file = dentry_open(tgt_dentry, tgt_mnt, 0x1);
++	tgt_file = dentry_open(tgt_dentry, tgt_mnt, 0x1, current_cred());
+ 	if(!tgt_file || IS_ERR(tgt_file)) {
+ 		printk(KERN_CRIT "mini_fo_cp_cont: ERROR opening target file.\n");
+ 		err = PTR_ERR(tgt_file);
+@@ -244,7 +244,7 @@ int mini_fo_cp_cont(dentry_t *tgt_dentry
+ 	}
+ 
+ 	/* open file read only */
+-	src_file = dentry_open(src_dentry, src_mnt, 0x0);
++	src_file = dentry_open(src_dentry, src_mnt, 0x0, current_cred());
+ 	if(!src_file || IS_ERR(src_file)) {
+ 		printk(KERN_CRIT "mini_fo_cp_cont: ERROR opening source file.\n");
+ 		err = PTR_ERR(src_file);
+--- a/fs/mini_fo/file.c
++++ b/fs/mini_fo/file.c
+@@ -437,7 +437,7 @@ mini_fo_open(inode_t *inode, file_t *fil
+ 			mntget(stopd(inode->i_sb)->hidden_mnt);
+ 			hidden_file = dentry_open(hidden_dentry,
+ 						  stopd(inode->i_sb)->hidden_mnt,
+-						  hidden_flags);
++						  hidden_flags, file->f_cred);
+ 			if (IS_ERR(hidden_file)) {
+ 				err = PTR_ERR(hidden_file);
+ 				dput(hidden_dentry);
+@@ -479,7 +479,7 @@ mini_fo_open(inode_t *inode, file_t *fil
+ 			mntget(stopd(inode->i_sb)->hidden_mnt);
+ 			hidden_file = dentry_open(hidden_dentry,
+ 						  stopd(inode->i_sb)->hidden_mnt,
+-						  hidden_flags);
++						  hidden_flags, file->f_cred);
+ 			if (IS_ERR(hidden_file)) {
+ 				err = PTR_ERR(hidden_file);
+ 				dput(hidden_dentry);
+@@ -512,7 +512,7 @@ mini_fo_open(inode_t *inode, file_t *fil
+ 	mntget(stopd(inode->i_sb)->hidden_mnt2);
+ 	hidden_sto_file = dentry_open(hidden_sto_dentry,
+ 				      stopd(inode->i_sb)->hidden_mnt2,
+-				      hidden_flags);
++				      hidden_flags, file->f_cred);
+ 
+ 	/* dentry_open dputs the dentry if it fails */
+ 	if (IS_ERR(hidden_sto_file)) {
+--- a/fs/mini_fo/meta.c
++++ b/fs/mini_fo/meta.c
+@@ -56,7 +56,7 @@ int meta_build_lists(dentry_t *dentry)
+ 
+ 
+ 		/* open META-file for reading */
+-		meta_file = dentry_open(meta_dentry, meta_mnt, 0x0);
++		meta_file = dentry_open(meta_dentry, meta_mnt, 0x0, current_cred());
+ 		if(!meta_file || IS_ERR(meta_file)) {
+ 			printk(KERN_CRIT "mini_fo: meta_build_lists: \
+                                           ERROR opening META file.\n");
+@@ -448,7 +448,7 @@ int meta_write_d_entry(dentry_t *dentry,
+ 	mntget(meta_mnt);
+ 
+         /* open META-file for writing */
+-        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1, current_cred());
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
+                                   ERROR opening meta file.\n");
+@@ -546,7 +546,7 @@ int meta_write_r_entry(dentry_t *dentry,
+ 	mntget(meta_mnt);
+ 
+         /* open META-file for writing */
+-        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1, current_cred());
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_write_r_entry: \
+                                   ERROR opening meta file.\n");
+@@ -686,7 +686,7 @@ int meta_sync_d_list(dentry_t *dentry, i
+ 	mntget(meta_mnt);
+ 
+         /* open META-file for writing */
+-        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1, current_cred());
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
+                                   ERROR opening meta file.\n");
+@@ -828,7 +828,7 @@ int meta_sync_r_list(dentry_t *dentry, i
+ 	mntget(meta_mnt);
+ 
+         /* open META-file for writing */
+-        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1, current_cred());
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
+                                   ERROR opening meta file.\n");
diff --git a/target/linux/generic/patches-2.6.31/215-mini_fo_2.6.30.patch b/target/linux/generic/patches-2.6.31/215-mini_fo_2.6.30.patch
new file mode 100644
index 0000000000..2d20920614
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/215-mini_fo_2.6.30.patch
@@ -0,0 +1,157 @@
+--- a/fs/mini_fo/aux.c
++++ b/fs/mini_fo/aux.c
+@@ -86,8 +86,10 @@ int get_neg_sto_dentry(dentry_t *dentry)
+ 	len = dentry->d_name.len;
+ 	name = dentry->d_name.name;
+ 
++	mutex_lock(&dtohd2(dentry->d_parent)->d_inode->i_mutex);
+ 	dtohd2(dentry) =
+ 		lookup_one_len(name, dtohd2(dentry->d_parent), len);
++	mutex_unlock(&dtohd2(dentry->d_parent)->d_inode->i_mutex);
+ 
+  out:
+ 	return err;
+@@ -426,7 +428,9 @@ int build_sto_structure(dentry_t *dir, d
+ 		const unsigned char *name;
+ 		len = dtohd(dentry)->d_name.len;
+ 		name = dtohd(dentry)->d_name.name;
++		mutex_lock(&dtohd2(dir)->d_inode->i_mutex);
+ 		hidden_sto_dentry = lookup_one_len(name, dtohd2(dir), len);
++		mutex_unlock(&dtohd2(dir)->d_inode->i_mutex);
+ 		dtohd2(dentry) = hidden_sto_dentry;
+ 	}
+ 
+--- a/fs/mini_fo/inode.c
++++ b/fs/mini_fo/inode.c
+@@ -113,17 +113,23 @@ mini_fo_lookup(inode_t *dir, dentry_t *d
+ 		hidden_dir_dentry = hidden_dentry->d_parent;
+ 		kfree(bpath);
+ 	}
+-	else if(hidden_dir_dentry && hidden_dir_dentry->d_inode)
++	else if(hidden_dir_dentry && hidden_dir_dentry->d_inode) {
++		mutex_lock(&hidden_dir_dentry->d_inode->i_mutex);
+ 		hidden_dentry =
+ 			lookup_one_len(name, hidden_dir_dentry, namelen);
+-	else
++		mutex_unlock(&hidden_dir_dentry->d_inode->i_mutex);
++	} else {
+ 		hidden_dentry = NULL;
++	}
+ 
+-	if(hidden_sto_dir_dentry && hidden_sto_dir_dentry->d_inode)
++	if(hidden_sto_dir_dentry && hidden_sto_dir_dentry->d_inode) {
++		mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
+ 		hidden_sto_dentry =
+ 			lookup_one_len(name, hidden_sto_dir_dentry, namelen);
+-	else
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++	} else {
+ 		hidden_sto_dentry =  NULL;
++	}
+ 
+ 	/* catch error in lookup */
+ 	if (IS_ERR(hidden_dentry) || IS_ERR(hidden_sto_dentry)) {
+@@ -553,9 +559,11 @@ mini_fo_rmdir(inode_t *dir, dentry_t *de
+ #endif
+ 
+ 		/* Delete an old WOL file contained in the storage dir */
++		mutex_lock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		meta_dentry = lookup_one_len(META_FILENAME,
+ 					     hidden_sto_dentry,
+ 					     strlen(META_FILENAME));
++		mutex_unlock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		if(meta_dentry->d_inode) {
+ 			err = vfs_unlink(hidden_sto_dentry->d_inode, meta_dentry);
+ 			dput(meta_dentry);
+@@ -643,9 +651,11 @@ mini_fo_rmdir(inode_t *dir, dentry_t *de
+ #endif
+ 
+ 		/* Delete an old WOL file contained in the storage dir */
++		mutex_lock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		meta_dentry = lookup_one_len(META_FILENAME,
+ 					     hidden_sto_dentry,
+ 					     strlen(META_FILENAME));
++		mutex_unlock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		if(meta_dentry->d_inode) {
+ 			/* is this necessary? dget(meta_dentry); */
+ 			err = vfs_unlink(hidden_sto_dentry->d_inode,
+@@ -688,9 +698,11 @@ mini_fo_rmdir(inode_t *dir, dentry_t *de
+ #endif
+ 
+ 		/* Delete an old WOL file contained in the storage dir */
++		mutex_lock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		meta_dentry = lookup_one_len(META_FILENAME,
+ 					     hidden_sto_dentry,
+ 					     strlen(META_FILENAME));
++		mutex_unlock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		if(meta_dentry->d_inode) {
+ 			/* is this necessary? dget(meta_dentry); */
+ 			err = vfs_unlink(hidden_sto_dentry->d_inode,
+--- a/fs/mini_fo/meta.c
++++ b/fs/mini_fo/meta.c
+@@ -43,9 +43,11 @@ int meta_build_lists(dentry_t *dentry)
+ 
+   	/* might there be a META-file? */
+ 	if(dtohd2(dentry) && dtohd2(dentry)->d_inode) {
++		mutex_lock(&dtohd2(dentry)->d_inode->i_mutex);
+ 		meta_dentry = lookup_one_len(META_FILENAME,
+ 					     dtohd2(dentry),
+ 					     strlen(META_FILENAME));
++		mutex_unlock(&dtohd2(dentry)->d_inode->i_mutex);
+ 		if(!meta_dentry->d_inode) {
+ 			dput(meta_dentry);
+ 			goto out_ok;
+@@ -426,8 +428,11 @@ int meta_write_d_entry(dentry_t *dentry,
+ 			goto out;
+                 }
+         }
++
++	mutex_lock(&dtohd2(dentry)->d_inode->i_mutex);
+ 	meta_dentry = lookup_one_len(META_FILENAME,
+ 				     dtohd2(dentry), strlen (META_FILENAME));
++	mutex_unlock(&dtohd2(dentry)->d_inode->i_mutex);
+ 
+ 	/* We need to create a META-file */
+         if(!meta_dentry->d_inode) {
+@@ -527,9 +532,13 @@ int meta_write_r_entry(dentry_t *dentry,
+ 			goto out;
+                 }
+         }
++
++	mutex_lock(&dtohd2(dentry)->d_inode->i_mutex);
+ 	meta_dentry = lookup_one_len(META_FILENAME,
+ 				     dtohd2(dentry),
+ 				     strlen (META_FILENAME));
++	mutex_unlock(&dtohd2(dentry)->d_inode->i_mutex);
++
+         if(!meta_dentry->d_inode) {
+                 /* We need to create a META-file */
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+@@ -641,9 +650,13 @@ int meta_sync_d_list(dentry_t *dentry, i
+ 			goto out;
+                 }
+         }
++
++	mutex_lock(&dtohd2(dentry)->d_inode->i_mutex);
+ 	meta_dentry = lookup_one_len(META_FILENAME,
+ 				     dtohd2(dentry),
+ 				     strlen(META_FILENAME));
++	mutex_unlock(&dtohd2(dentry)->d_inode->i_mutex);
++
+         if(!meta_dentry->d_inode) {
+                 /* We need to create a META-file */
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+@@ -784,9 +797,13 @@ int meta_sync_r_list(dentry_t *dentry, i
+ 			goto out;
+                 }
+         }
++
++	mutex_lock(&dtohd2(dentry)->d_inode->i_mutex);
+ 	meta_dentry = lookup_one_len(META_FILENAME,
+ 				     dtohd2(dentry),
+ 				     strlen(META_FILENAME));
++	mutex_unlock(&dtohd2(dentry)->d_inode->i_mutex);
++
+         if(!meta_dentry->d_inode) {
+                 /* We need to create a META-file */
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
diff --git a/target/linux/generic/patches-2.6.31/216-mini_fo_locking.patch b/target/linux/generic/patches-2.6.31/216-mini_fo_locking.patch
new file mode 100644
index 0000000000..4f075920fb
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/216-mini_fo_locking.patch
@@ -0,0 +1,25 @@
+--- a/fs/mini_fo/state.c
++++ b/fs/mini_fo/state.c
+@@ -537,17 +537,17 @@ int nondir_mod_to_del(dentry_t *dentry)
+ 	dtohd(dentry) = NULL;
+ 	dtost(dentry) = DELETED;
+ 
+-	/* add deleted file to META-file */
+-	meta_add_d_entry(dentry->d_parent,
+-			 dentry->d_name.name,
+-			 dentry->d_name.len);
+-
+ 	/* was: unlock_dir(hidden_sto_dir_dentry); */
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
+ 	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
+ #else
+ 	up(&hidden_sto_dir_dentry->d_inode->i_sem);
+ #endif
++	/* add deleted file to META-file */
++	meta_add_d_entry(dentry->d_parent,
++			 dentry->d_name.name,
++			 dentry->d_name.len);
++
+ 	dput(hidden_sto_dir_dentry);
+ 
+  out:
diff --git a/target/linux/generic/patches-2.6.31/219-kobject_uevent.patch b/target/linux/generic/patches-2.6.31/219-kobject_uevent.patch
new file mode 100644
index 0000000000..7e00b224cc
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/219-kobject_uevent.patch
@@ -0,0 +1,42 @@
+--- a/lib/kobject_uevent.c
++++ b/lib/kobject_uevent.c
+@@ -29,7 +29,8 @@ u64 uevent_seqnum;
+ char uevent_helper[UEVENT_HELPER_PATH_LEN] = CONFIG_UEVENT_HELPER_PATH;
+ static DEFINE_SPINLOCK(sequence_lock);
+ #if defined(CONFIG_NET)
+-static struct sock *uevent_sock;
++struct sock *uevent_sock = NULL;
++EXPORT_SYMBOL_GPL(uevent_sock);
+ #endif
+ 
+ /* the strings here must match the enum in include/linux/kobject.h */
+@@ -42,6 +43,18 @@ static const char *kobject_actions[] = {
+ 	[KOBJ_OFFLINE] =	"offline",
+ };
+ 
++u64 uevent_next_seqnum(void)
++{
++	u64 seq;
++
++	spin_lock(&sequence_lock);
++	seq = ++uevent_seqnum;
++	spin_unlock(&sequence_lock);
++
++	return seq;
++}
++EXPORT_SYMBOL_GPL(uevent_next_seqnum);
++
+ /**
+  * kobject_action_type - translate action string to numeric type
+  *
+@@ -201,9 +214,7 @@ int kobject_uevent_env(struct kobject *k
+ 		kobj->state_remove_uevent_sent = 1;
+ 
+ 	/* we will send an event, so request a new sequence number */
+-	spin_lock(&sequence_lock);
+-	seq = ++uevent_seqnum;
+-	spin_unlock(&sequence_lock);
++	seq = uevent_next_seqnum();
+ 	retval = add_uevent_var(env, "SEQNUM=%llu", (unsigned long long)seq);
+ 	if (retval)
+ 		goto exit;
diff --git a/target/linux/generic/patches-2.6.31/220-sound_kconfig.patch b/target/linux/generic/patches-2.6.31/220-sound_kconfig.patch
new file mode 100644
index 0000000000..f374009a65
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/220-sound_kconfig.patch
@@ -0,0 +1,11 @@
+--- a/sound/core/Kconfig
++++ b/sound/core/Kconfig
+@@ -7,7 +7,7 @@ config SND_PCM
+ 	select SND_TIMER
+ 
+ config SND_HWDEP
+-	tristate
++	tristate "Sound hardware support"
+ 
+ config SND_RAWMIDI
+ 	tristate
diff --git a/target/linux/generic/patches-2.6.31/221-binfmt_elf_gcc4.1.patch b/target/linux/generic/patches-2.6.31/221-binfmt_elf_gcc4.1.patch
new file mode 100644
index 0000000000..fa891e0f3d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/221-binfmt_elf_gcc4.1.patch
@@ -0,0 +1,11 @@
+--- a/fs/binfmt_elf.c
++++ b/fs/binfmt_elf.c
+@@ -1193,7 +1193,7 @@ static unsigned long vma_dump_size(struc
+ 	if (FILTER(ELF_HEADERS) &&
+ 	    vma->vm_pgoff == 0 && (vma->vm_flags & VM_READ)) {
+ 		u32 __user *header = (u32 __user *) vma->vm_start;
+-		u32 word;
++		u32 word = 0;
+ 		mm_segment_t fs = get_fs();
+ 		/*
+ 		 * Doing it this way gets the constant folded by GCC.
diff --git a/target/linux/generic/patches-2.6.31/222-partial_eraseblock_write.patch b/target/linux/generic/patches-2.6.31/222-partial_eraseblock_write.patch
new file mode 100644
index 0000000000..d3234f004b
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/222-partial_eraseblock_write.patch
@@ -0,0 +1,146 @@
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -21,6 +21,8 @@
+ #include <linux/root_dev.h>
+ #include <linux/magic.h>
+ 
++#define MTD_ERASE_PARTIAL	0x8000 /* partition only covers parts of an erase block */
++
+ /* Our partition linked list */
+ static LIST_HEAD(mtd_partitions);
+ 
+@@ -226,13 +228,60 @@ static int part_erase(struct mtd_info *m
+ 		return -EROFS;
+ 	if (instr->addr >= mtd->size)
+ 		return -EINVAL;
++
++	instr->partial_start = false;
++	if (mtd->flags & MTD_ERASE_PARTIAL) {
++		size_t readlen = 0;
++		u64 mtd_ofs;
++
++		instr->erase_buf = kmalloc(part->master->erasesize, GFP_ATOMIC);
++		if (!instr->erase_buf)
++			return -ENOMEM;
++
++		mtd_ofs = part->offset + instr->addr;
++		instr->erase_buf_ofs = do_div(mtd_ofs, part->master->erasesize);
++
++		if (instr->erase_buf_ofs > 0) {
++			instr->addr -= instr->erase_buf_ofs;
++			ret = part->master->read(part->master,
++				instr->addr + part->offset,
++				part->master->erasesize,
++				&readlen, instr->erase_buf);
++
++			instr->partial_start = true;
++		} else {
++			mtd_ofs = part->offset + part->mtd.size;
++			instr->erase_buf_ofs = part->master->erasesize -
++				do_div(mtd_ofs, part->master->erasesize);
++
++			if (instr->erase_buf_ofs > 0) {
++				instr->len += instr->erase_buf_ofs;
++				ret = part->master->read(part->master,
++					part->offset + instr->addr +
++					instr->len - part->master->erasesize,
++					part->master->erasesize, &readlen,
++					instr->erase_buf);
++			} else {
++				ret = 0;
++			}
++		}
++		if (ret < 0) {
++			kfree(instr->erase_buf);
++			return ret;
++		}
++
++	}
++
+ 	instr->addr += part->offset;
+ 	ret = part->master->erase(part->master, instr);
+ 	if (ret) {
+ 		if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
+ 			instr->fail_addr -= part->offset;
+ 		instr->addr -= part->offset;
++		if (mtd->flags & MTD_ERASE_PARTIAL)
++			kfree(instr->erase_buf);
+ 	}
++
+ 	return ret;
+ }
+ 
+@@ -240,7 +289,25 @@ void mtd_erase_callback(struct erase_inf
+ {
+ 	if (instr->mtd->erase == part_erase) {
+ 		struct mtd_part *part = PART(instr->mtd);
++		size_t wrlen = 0;
+ 
++		if (instr->mtd->flags & MTD_ERASE_PARTIAL) {
++			if (instr->partial_start) {
++				part->master->write(part->master,
++					instr->addr, instr->erase_buf_ofs,
++					&wrlen, instr->erase_buf);
++				instr->addr += instr->erase_buf_ofs;
++			} else {
++				instr->len -= instr->erase_buf_ofs;
++				part->master->write(part->master,
++					instr->addr + instr->len,
++					instr->erase_buf_ofs, &wrlen,
++					instr->erase_buf +
++					part->master->erasesize -
++					instr->erase_buf_ofs);
++			}
++			kfree(instr->erase_buf);
++		}
+ 		if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
+ 			instr->fail_addr -= part->offset;
+ 		instr->addr -= part->offset;
+@@ -472,18 +539,24 @@ static struct mtd_part *add_one_partitio
+ 	if ((slave->mtd.flags & MTD_WRITEABLE) &&
+ 	    mtd_mod_by_eb(slave->offset, &slave->mtd)) {
+ 		/* Doesn't start on a boundary of major erase size */
+-		/* FIXME: Let it be writable if it is on a boundary of
+-		 * _minor_ erase size though */
+-		slave->mtd.flags &= ~MTD_WRITEABLE;
+-		printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
+-			part->name);
++		slave->mtd.flags |= MTD_ERASE_PARTIAL;
++		if (((u32) slave->mtd.size) > master->erasesize)
++			slave->mtd.flags &= ~MTD_WRITEABLE;
++		else
++			slave->mtd.erasesize = slave->mtd.size;
+ 	}
+ 	if ((slave->mtd.flags & MTD_WRITEABLE) &&
+-	    mtd_mod_by_eb(slave->mtd.size, &slave->mtd)) {
+-		slave->mtd.flags &= ~MTD_WRITEABLE;
+-		printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
+-			part->name);
+-	}
++	    mtd_mod_by_eb(slave->offset + slave->mtd.size, &slave->mtd)) {
++		slave->mtd.flags |= MTD_ERASE_PARTIAL;
++
++		if ((u32) slave->mtd.size > master->erasesize)
++			slave->mtd.flags &= ~MTD_WRITEABLE;
++		else
++			slave->mtd.erasesize = slave->mtd.size;
++	}
++	if ((slave->mtd.flags & (MTD_ERASE_PARTIAL|MTD_WRITEABLE)) == MTD_ERASE_PARTIAL)
++		printk(KERN_WARNING"mtd: partition \"%s\" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only\n",
++				part->name);
+ 
+ 	slave->mtd.ecclayout = master->ecclayout;
+ 	if (master->block_isbad) {
+--- a/include/linux/mtd/mtd.h
++++ b/include/linux/mtd/mtd.h
+@@ -46,6 +46,10 @@ struct erase_info {
+ 	u_long priv;
+ 	u_char state;
+ 	struct erase_info *next;
++
++	u8 *erase_buf;
++	u32 erase_buf_ofs;
++	bool partial_start;
+ };
+ 
+ struct mtd_erase_region_info {
diff --git a/target/linux/generic/patches-2.6.31/240-packet_socket_type.patch b/target/linux/generic/patches-2.6.31/240-packet_socket_type.patch
new file mode 100644
index 0000000000..92553de0f4
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/240-packet_socket_type.patch
@@ -0,0 +1,132 @@
+This patch allows the user to specify desired packet types (outgoing,
+broadcast, unicast, etc.) on packet sockets via setsockopt.
+This can reduce the load in situations where only a limited number
+of packet types are necessary
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+
+--- a/include/linux/if_packet.h
++++ b/include/linux/if_packet.h
+@@ -31,6 +31,8 @@ struct sockaddr_ll
+ /* These ones are invisible by user level */
+ #define PACKET_LOOPBACK		5		/* MC/BRD frame looped back */
+ #define PACKET_FASTROUTE	6		/* Fastrouted frame	*/
++#define PACKET_MASK_ANY		0xffffffff	/* mask for packet type bits */
++
+ 
+ /* Packet socket options */
+ 
+@@ -48,6 +50,7 @@ struct sockaddr_ll
+ #define PACKET_RESERVE			12
+ #define PACKET_TX_RING			13
+ #define PACKET_LOSS			14
++#define PACKET_RECV_TYPE		15
+ 
+ struct tpacket_stats
+ {
+--- a/net/packet/af_packet.c
++++ b/net/packet/af_packet.c
+@@ -206,6 +206,7 @@ struct packet_sock {
+ 	unsigned int		tp_reserve;
+ 	unsigned int		tp_loss:1;
+ #endif
++	unsigned int		pkt_type;
+ };
+ 
+ struct packet_skb_cb {
+@@ -343,6 +344,7 @@ static int packet_rcv_spkt(struct sk_buf
+ {
+ 	struct sock *sk;
+ 	struct sockaddr_pkt *spkt;
++	struct packet_sock *po;
+ 
+ 	/*
+ 	 *	When we registered the protocol we saved the socket in the data
+@@ -350,6 +352,7 @@ static int packet_rcv_spkt(struct sk_buf
+ 	 */
+ 
+ 	sk = pt->af_packet_priv;
++	po = pkt_sk(sk);
+ 
+ 	/*
+ 	 *	Yank back the headers [hope the device set this
+@@ -362,7 +365,7 @@ static int packet_rcv_spkt(struct sk_buf
+ 	 *	so that this procedure is noop.
+ 	 */
+ 
+-	if (skb->pkt_type == PACKET_LOOPBACK)
++	if (!(po->pkt_type & (1 << skb->pkt_type)))
+ 		goto out;
+ 
+ 	if (dev_net(dev) != sock_net(sk))
+@@ -546,12 +549,12 @@ static int packet_rcv(struct sk_buff *sk
+ 	int skb_len = skb->len;
+ 	unsigned int snaplen, res;
+ 
+-	if (skb->pkt_type == PACKET_LOOPBACK)
+-		goto drop;
+-
+ 	sk = pt->af_packet_priv;
+ 	po = pkt_sk(sk);
+ 
++	if (!(po->pkt_type & (1 << skb->pkt_type)))
++		goto drop;
++
+ 	if (dev_net(dev) != sock_net(sk))
+ 		goto drop;
+ 
+@@ -667,12 +670,12 @@ static int tpacket_rcv(struct sk_buff *s
+ 	struct timeval tv;
+ 	struct timespec ts;
+ 
+-	if (skb->pkt_type == PACKET_LOOPBACK)
+-		goto drop;
+-
+ 	sk = pt->af_packet_priv;
+ 	po = pkt_sk(sk);
+ 
++	if (!(po->pkt_type & (1 << skb->pkt_type)))
++		goto drop;
++
+ 	if (dev_net(dev) != sock_net(sk))
+ 		goto drop;
+ 
+@@ -1387,6 +1390,7 @@ static int packet_create(struct net *net
+ 	spin_lock_init(&po->bind_lock);
+ 	mutex_init(&po->pg_vec_lock);
+ 	po->prot_hook.func = packet_rcv;
++	po->pkt_type = PACKET_MASK_ANY & ~(1 << PACKET_LOOPBACK);
+ 
+ 	if (sock->type == SOCK_PACKET)
+ 		po->prot_hook.func = packet_rcv_spkt;
+@@ -1733,6 +1737,16 @@ packet_setsockopt(struct socket *sock, i
+ 			ret = packet_mc_drop(sk, &mreq);
+ 		return ret;
+ 	}
++	case PACKET_RECV_TYPE:
++	{
++		unsigned int val;
++		if (optlen != sizeof(val))
++			return -EINVAL;
++		if (copy_from_user(&val, optval, sizeof(val)))
++			return -EFAULT;
++		po->pkt_type = val & ~PACKET_LOOPBACK;
++		return 0;
++	}
+ 
+ #ifdef CONFIG_PACKET_MMAP
+ 	case PACKET_RX_RING:
+@@ -1878,6 +1892,13 @@ static int packet_getsockopt(struct sock
+ 
+ 		data = &val;
+ 		break;
++	case PACKET_RECV_TYPE:
++		if (len > sizeof(unsigned int))
++			len = sizeof(unsigned int);
++		val = po->pkt_type;
++
++		data = &val;
++		break;
+ #ifdef CONFIG_PACKET_MMAP
+ 	case PACKET_VERSION:
+ 		if (len > sizeof(int))
diff --git a/target/linux/generic/patches-2.6.31/250-pppoe_header_pad.patch b/target/linux/generic/patches-2.6.31/250-pppoe_header_pad.patch
new file mode 100644
index 0000000000..042546f317
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/250-pppoe_header_pad.patch
@@ -0,0 +1,20 @@
+--- a/drivers/net/pppoe.c
++++ b/drivers/net/pppoe.c
+@@ -863,7 +863,7 @@ static int pppoe_sendmsg(struct kiocb *i
+ 		goto end;
+ 
+ 
+-	skb = sock_wmalloc(sk, total_len + dev->hard_header_len + 32,
++	skb = sock_wmalloc(sk, total_len + dev->hard_header_len + 32 + NET_SKB_PAD,
+ 			   0, GFP_KERNEL);
+ 	if (!skb) {
+ 		error = -ENOMEM;
+@@ -871,7 +871,7 @@ static int pppoe_sendmsg(struct kiocb *i
+ 	}
+ 
+ 	/* Reserve space for headers. */
+-	skb_reserve(skb, dev->hard_header_len);
++	skb_reserve(skb, dev->hard_header_len + NET_SKB_PAD);
+ 	skb_reset_network_header(skb);
+ 
+ 	skb->dev = dev;
diff --git a/target/linux/generic/patches-2.6.31/260-extend_pfifo_fast.patch b/target/linux/generic/patches-2.6.31/260-extend_pfifo_fast.patch
new file mode 100644
index 0000000000..08c7eaa525
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/260-extend_pfifo_fast.patch
@@ -0,0 +1,144 @@
+--- a/net/sched/sch_generic.c
++++ b/net/sched/sch_generic.c
+@@ -391,16 +391,50 @@ static const u8 prio2band[TC_PRIO_MAX+1]
+ 
+ #define PFIFO_FAST_BANDS 3
+ 
++struct pfifo_fast_sched_data {
++	struct tcf_proto *filter_list;
++	struct sk_buff_head list[PFIFO_FAST_BANDS];
++};
++
+ static inline struct sk_buff_head *prio2list(struct sk_buff *skb,
+ 					     struct Qdisc *qdisc)
+ {
+-	struct sk_buff_head *list = qdisc_priv(qdisc);
++	struct pfifo_fast_sched_data *q = qdisc_priv(qdisc);
++	struct sk_buff_head *list = q->list;
+ 	return list + prio2band[skb->priority & TC_PRIO_MAX];
+ }
+ 
++static int pfifo_fast_filter(struct sk_buff *skb, struct Qdisc* qdisc)
++{
++#ifdef CONFIG_NET_CLS_ACT
++	struct pfifo_fast_sched_data *q = qdisc_priv(qdisc);
++	int result = 0, ret = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN;
++	struct tcf_result res;
++
++	if (q->filter_list != NULL)
++		result = tc_classify(skb, q->filter_list, &res);
++	if (result >= 0) {
++		switch (result) {
++		case TC_ACT_STOLEN:
++		case TC_ACT_QUEUED:
++			ret = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN;
++		case TC_ACT_SHOT:
++			kfree_skb(skb);
++			return ret;
++		}
++	}
++#endif
++	return 0;
++}
++
+ static int pfifo_fast_enqueue(struct sk_buff *skb, struct Qdisc* qdisc)
+ {
+ 	struct sk_buff_head *list = prio2list(skb, qdisc);
++	int ret;
++
++	ret = pfifo_fast_filter(skb, qdisc);
++	if (ret)
++		return ret;
+ 
+ 	if (skb_queue_len(list) < qdisc_dev(qdisc)->tx_queue_len) {
+ 		qdisc->q.qlen++;
+@@ -412,8 +446,9 @@ static int pfifo_fast_enqueue(struct sk_
+ 
+ static struct sk_buff *pfifo_fast_dequeue(struct Qdisc* qdisc)
+ {
++	struct pfifo_fast_sched_data *q = qdisc_priv(qdisc);
++	struct sk_buff_head *list = q->list;
+ 	int prio;
+-	struct sk_buff_head *list = qdisc_priv(qdisc);
+ 
+ 	for (prio = 0; prio < PFIFO_FAST_BANDS; prio++) {
+ 		if (!skb_queue_empty(list + prio)) {
+@@ -440,8 +475,9 @@ static struct sk_buff *pfifo_fast_peek(s
+ 
+ static void pfifo_fast_reset(struct Qdisc* qdisc)
+ {
++	struct pfifo_fast_sched_data *q = qdisc_priv(qdisc);
++	struct sk_buff_head *list = q->list;
+ 	int prio;
+-	struct sk_buff_head *list = qdisc_priv(qdisc);
+ 
+ 	for (prio = 0; prio < PFIFO_FAST_BANDS; prio++)
+ 		__qdisc_reset_queue(qdisc, list + prio);
+@@ -464,8 +500,9 @@ nla_put_failure:
+ 
+ static int pfifo_fast_init(struct Qdisc *qdisc, struct nlattr *opt)
+ {
++	struct pfifo_fast_sched_data *q = qdisc_priv(qdisc);
++	struct sk_buff_head *list = q->list;
+ 	int prio;
+-	struct sk_buff_head *list = qdisc_priv(qdisc);
+ 
+ 	for (prio = 0; prio < PFIFO_FAST_BANDS; prio++)
+ 		skb_queue_head_init(list + prio);
+@@ -473,9 +510,36 @@ static int pfifo_fast_init(struct Qdisc
+ 	return 0;
+ }
+ 
++static int pfifo_fast_change_class(struct Qdisc *qdisc, u32 classid, u32 parentid,
++			    struct nlattr **tca, unsigned long *arg)
++{
++	return -EOPNOTSUPP;
++}
++
++static unsigned long pfifo_fast_get(struct Qdisc *qdisc, u32 classid)
++{
++	return 0;
++}
++
++static struct tcf_proto **pfifo_fast_find_tcf(struct Qdisc *qdisc, unsigned long cl)
++{
++	struct pfifo_fast_sched_data *q = qdisc_priv(qdisc);
++
++	if (cl)
++		return NULL;
++	return &q->filter_list;
++}
++
++static const struct Qdisc_class_ops pfifo_fast_class_ops = {
++	.get		=	pfifo_fast_get,
++	.change		=	pfifo_fast_change_class,
++	.tcf_chain	=	pfifo_fast_find_tcf,
++};
++
+ static struct Qdisc_ops pfifo_fast_ops __read_mostly = {
+ 	.id		=	"pfifo_fast",
+-	.priv_size	=	PFIFO_FAST_BANDS * sizeof(struct sk_buff_head),
++	.cl_ops		=	&pfifo_fast_class_ops,
++	.priv_size	=	sizeof(struct pfifo_fast_sched_data),
+ 	.enqueue	=	pfifo_fast_enqueue,
+ 	.dequeue	=	pfifo_fast_dequeue,
+ 	.peek		=	pfifo_fast_peek,
+@@ -757,3 +821,18 @@ void dev_shutdown(struct net_device *dev
+ 	shutdown_scheduler_queue(dev, &dev->rx_queue, &noop_qdisc);
+ 	WARN_ON(timer_pending(&dev->watchdog_timer));
+ }
++
++#ifdef CONFIG_NET_SCHED
++static int __init sch_generic_init(void)
++{
++	return register_qdisc(&pfifo_fast_ops);
++}
++
++static void __exit sch_generic_exit(void)
++{
++	unregister_qdisc(&pfifo_fast_ops);
++}
++
++module_init(sch_generic_init)
++module_exit(sch_generic_exit)
++#endif
diff --git a/target/linux/generic/patches-2.6.31/270-sched_bfs.patch b/target/linux/generic/patches-2.6.31/270-sched_bfs.patch
new file mode 100644
index 0000000000..9f30674ef7
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/270-sched_bfs.patch
@@ -0,0 +1,6448 @@
+This patch adds support for bfs v230, modified for diff size reduction
+
+--- a/Documentation/sysctl/kernel.txt
++++ b/Documentation/sysctl/kernel.txt
+@@ -27,6 +27,7 @@ show up in /proc/sys/kernel:
+ - domainname
+ - hostname
+ - hotplug
++- iso_cpu
+ - java-appletviewer           [ binfmt_java, obsolete ]
+ - java-interpreter            [ binfmt_java, obsolete ]
+ - kstack_depth_to_print       [ X86 only ]
+@@ -49,6 +50,7 @@ show up in /proc/sys/kernel:
+ - randomize_va_space
+ - real-root-dev               ==> Documentation/initrd.txt
+ - reboot-cmd                  [ SPARC only ]
++- rr_interval
+ - rtsig-max
+ - rtsig-nr
+ - sem
+@@ -171,6 +173,16 @@ Default value is "/sbin/hotplug".
+ 
+ ==============================================================
+ 
++iso_cpu: (BFS only)
++
++This sets the percentage cpu that the unprivileged SCHED_ISO tasks can
++run effectively at realtime priority, averaged over a rolling five
++seconds over the -whole- system, meaning all cpus.
++
++Set to 70 (percent) by default.
++
++==============================================================
++
+ l2cr: (PPC only)
+ 
+ This flag controls the L2 cache of G3 processor boards. If
+@@ -333,6 +345,19 @@ rebooting. ???
+ 
+ ==============================================================
+ 
++rr_interval: (BFS only)
++
++This is the smallest duration that any cpu process scheduling unit
++will run for. Increasing this value can increase throughput of cpu
++bound tasks substantially but at the expense of increased latencies
++overall. This value is in milliseconds and the default value chosen
++depends on the number of cpus available at scheduler initialisation
++with a minimum of 6.
++
++Valid values are from 1-5000.
++
++==============================================================
++
+ rtsig-max & rtsig-nr:
+ 
+ The file rtsig-max can be used to tune the maximum number
+--- a/include/linux/init_task.h
++++ b/include/linux/init_task.h
+@@ -116,9 +116,10 @@ extern struct cred init_cred;
+ 	.usage		= ATOMIC_INIT(2),				\
+ 	.flags		= PF_KTHREAD,					\
+ 	.lock_depth	= -1,						\
+-	.prio		= MAX_PRIO-20,					\
++	.prio		= NORMAL_PRIO,					\
+ 	.static_prio	= MAX_PRIO-20,					\
+-	.normal_prio	= MAX_PRIO-20,					\
++	.normal_prio	= NORMAL_PRIO,					\
++	.deadline	= 0,						\
+ 	.policy		= SCHED_NORMAL,					\
+ 	.cpus_allowed	= CPU_MASK_ALL,					\
+ 	.mm		= NULL,						\
+--- a/include/linux/sched.h
++++ b/include/linux/sched.h
+@@ -36,9 +36,12 @@
+ #define SCHED_FIFO		1
+ #define SCHED_RR		2
+ #define SCHED_BATCH		3
+-/* SCHED_ISO: reserved but not implemented yet */
++#define SCHED_ISO		4
+ #define SCHED_IDLE		5
+ 
++#define SCHED_MAX		(SCHED_IDLE)
++#define SCHED_RANGE(policy)	((policy) <= SCHED_MAX)
++
+ #ifdef __KERNEL__
+ 
+ struct sched_param {
+@@ -1090,10 +1093,13 @@ struct sched_entity {
+ 	struct load_weight	load;		/* for load-balancing */
+ 	struct rb_node		run_node;
+ 	struct list_head	group_node;
++#ifdef CONFIG_SCHED_CFS
+ 	unsigned int		on_rq;
+ 
+ 	u64			exec_start;
++#endif
+ 	u64			sum_exec_runtime;
++#ifdef CONFIG_SCHED_CFS
+ 	u64			vruntime;
+ 	u64			prev_sum_exec_runtime;
+ 
+@@ -1145,6 +1151,7 @@ struct sched_entity {
+ 	/* rq "owned" by this entity/group: */
+ 	struct cfs_rq		*my_q;
+ #endif
++#endif
+ };
+ 
+ struct sched_rt_entity {
+@@ -1172,17 +1179,19 @@ struct task_struct {
+ 
+ 	int lock_depth;		/* BKL lock depth */
+ 
+-#ifdef CONFIG_SMP
+-#ifdef __ARCH_WANT_UNLOCKED_CTXSW
+ 	int oncpu;
+-#endif
+-#endif
+-
+ 	int prio, static_prio, normal_prio;
+ 	unsigned int rt_priority;
+ 	const struct sched_class *sched_class;
+ 	struct sched_entity se;
+ 	struct sched_rt_entity rt;
++	unsigned long deadline;
++#ifdef CONFIG_SCHED_BFS
++	int load_weight;	/* for niceness load balancing purposes */
++	int first_time_slice;
++	unsigned long long timestamp, last_ran;
++	unsigned long utime_pc, stime_pc;
++#endif
+ 
+ #ifdef CONFIG_PREEMPT_NOTIFIERS
+ 	/* list of struct preempt_notifier: */
+@@ -1205,6 +1214,9 @@ struct task_struct {
+ 
+ 	unsigned int policy;
+ 	cpumask_t cpus_allowed;
++#ifdef CONFIG_HOTPLUG_CPU
++	cpumask_t unplugged_mask;
++#endif
+ 
+ #ifdef CONFIG_PREEMPT_RCU
+ 	int rcu_read_lock_nesting;
+@@ -1497,11 +1509,19 @@ struct task_struct {
+  * priority to a value higher than any user task. Note:
+  * MAX_RT_PRIO must not be smaller than MAX_USER_RT_PRIO.
+  */
+-
++#define PRIO_RANGE		(40)
+ #define MAX_USER_RT_PRIO	100
+ #define MAX_RT_PRIO		MAX_USER_RT_PRIO
+-
++#ifdef CONFIG_SCHED_BFS
++#define MAX_PRIO		(MAX_RT_PRIO + PRIO_RANGE)
++#define ISO_PRIO		(MAX_RT_PRIO)
++#define NORMAL_PRIO		(MAX_RT_PRIO + 1)
++#define IDLE_PRIO		(MAX_RT_PRIO + 2)
++#define PRIO_LIMIT		((IDLE_PRIO) + 1)
++#else
+ #define MAX_PRIO		(MAX_RT_PRIO + 40)
++#define NORMAL_PRIO	(MAX_RT_PRIO - 20)
++#endif
+ #define DEFAULT_PRIO		(MAX_RT_PRIO + 20)
+ 
+ static inline int rt_prio(int prio)
+@@ -1785,7 +1805,7 @@ task_sched_runtime(struct task_struct *t
+ extern unsigned long long thread_group_sched_runtime(struct task_struct *task);
+ 
+ /* sched_exec is called by processes performing an exec */
+-#ifdef CONFIG_SMP
++#if defined(CONFIG_SMP) && defined(CONFIG_SCHED_CFS)
+ extern void sched_exec(void);
+ #else
+ #define sched_exec()   {}
+--- a/init/Kconfig
++++ b/init/Kconfig
+@@ -451,9 +451,22 @@ config LOG_BUF_SHIFT
+ config HAVE_UNSTABLE_SCHED_CLOCK
+ 	bool
+ 
++choice
++	prompt "Scheduler"
++	default SCHED_CFS
++
++	config SCHED_CFS
++		bool "CFS"
++
++	config SCHED_BFS
++		bool "BFS"
++
++endchoice
++
+ config GROUP_SCHED
+ 	bool "Group CPU scheduler"
+ 	depends on EXPERIMENTAL
++	depends on SCHED_CFS
+ 	default n
+ 	help
+ 	  This feature lets CPU scheduler recognize task groups and control CPU
+@@ -504,6 +517,7 @@ endchoice
+ 
+ menuconfig CGROUPS
+ 	boolean "Control Group support"
++	depends on SCHED_CFS
+ 	help
+ 	  This option adds support for grouping sets of processes together, for
+ 	  use with process control subsystems such as Cpusets, CFS, memory
+--- a/kernel/Makefile
++++ b/kernel/Makefile
+@@ -2,7 +2,7 @@
+ # Makefile for the linux kernel.
+ #
+ 
+-obj-y     = sched.o fork.o exec_domain.o panic.o printk.o \
++obj-y     = $(if $(CONFIG_SCHED_CFS),sched.o,sched_bfs.o) fork.o exec_domain.o panic.o printk.o \
+ 	    cpu.o exit.o itimer.o time.o softirq.o resource.o \
+ 	    sysctl.o capability.o ptrace.o timer.o user.o \
+ 	    signal.o sys.o kmod.o workqueue.o pid.o \
+@@ -108,6 +108,7 @@ ifneq ($(CONFIG_SCHED_OMIT_FRAME_POINTER
+ # I turn this off for IA-64 only.  Andreas Schwab says it's also needed on m68k
+ # to get a correct value for the wait-channel (WCHAN in ps). --davidm
+ CFLAGS_sched.o := $(PROFILING) -fno-omit-frame-pointer
++CFLAGS_sched_bfs.o := $(PROFILING) -fno-omit-frame-pointer
+ endif
+ 
+ $(obj)/configs.o: $(obj)/config_data.h
+--- a/kernel/kthread.c
++++ b/kernel/kthread.c
+@@ -16,7 +16,11 @@
+ #include <linux/mutex.h>
+ #include <trace/events/sched.h>
+ 
++#ifdef CONFIG_SCHED_BFS
++#define KTHREAD_NICE_LEVEL (0)
++#else
+ #define KTHREAD_NICE_LEVEL (-5)
++#endif
+ 
+ static DEFINE_SPINLOCK(kthread_create_lock);
+ static LIST_HEAD(kthread_create_list);
+--- /dev/null
++++ b/kernel/sched_bfs.c
+@@ -0,0 +1,6105 @@
++/*
++ *  kernel/sched_bfs.c, was sched.c
++ *
++ *  Kernel scheduler and related syscalls
++ *
++ *  Copyright (C) 1991-2002  Linus Torvalds
++ *
++ *  1996-12-23  Modified by Dave Grothe to fix bugs in semaphores and
++ *		make semaphores SMP safe
++ *  1998-11-19	Implemented schedule_timeout() and related stuff
++ *		by Andrea Arcangeli
++ *  2002-01-04	New ultra-scalable O(1) scheduler by Ingo Molnar:
++ *		hybrid priority-list and round-robin design with
++ *		an array-switch method of distributing timeslices
++ *		and per-CPU runqueues.  Cleanups and useful suggestions
++ *		by Davide Libenzi, preemptible kernel bits by Robert Love.
++ *  2003-09-03	Interactivity tuning by Con Kolivas.
++ *  2004-04-02	Scheduler domains code by Nick Piggin
++ *  2007-04-15  Work begun on replacing all interactivity tuning with a
++ *              fair scheduling design by Con Kolivas.
++ *  2007-05-05  Load balancing (smp-nice) and other improvements
++ *              by Peter Williams
++ *  2007-05-06  Interactivity improvements to CFS by Mike Galbraith
++ *  2007-07-01  Group scheduling enhancements by Srivatsa Vaddagiri
++ *  2007-11-29  RT balancing improvements by Steven Rostedt, Gregory Haskins,
++ *              Thomas Gleixner, Mike Kravetz
++ *  now		Brainfuck deadline scheduling policy by Con Kolivas deletes
++ *              a whole lot of those previous things.
++ */
++
++#include <linux/mm.h>
++#include <linux/module.h>
++#include <linux/nmi.h>
++#include <linux/init.h>
++#include <asm/uaccess.h>
++#include <linux/highmem.h>
++#include <linux/smp_lock.h>
++#include <asm/mmu_context.h>
++#include <linux/interrupt.h>
++#include <linux/capability.h>
++#include <linux/completion.h>
++#include <linux/kernel_stat.h>
++#include <linux/debug_locks.h>
++#include <linux/perf_counter.h>
++#include <linux/security.h>
++#include <linux/notifier.h>
++#include <linux/profile.h>
++#include <linux/freezer.h>
++#include <linux/vmalloc.h>
++#include <linux/blkdev.h>
++#include <linux/delay.h>
++#include <linux/smp.h>
++#include <linux/threads.h>
++#include <linux/timer.h>
++#include <linux/rcupdate.h>
++#include <linux/cpu.h>
++#include <linux/cpuset.h>
++#include <linux/cpumask.h>
++#include <linux/percpu.h>
++#include <linux/kthread.h>
++#include <linux/proc_fs.h>
++#include <linux/seq_file.h>
++#include <linux/syscalls.h>
++#include <linux/times.h>
++#include <linux/tsacct_kern.h>
++#include <linux/kprobes.h>
++#include <linux/delayacct.h>
++#include <linux/reciprocal_div.h>
++#include <linux/log2.h>
++#include <linux/bootmem.h>
++#include <linux/ftrace.h>
++
++#include <asm/tlb.h>
++#include <asm/unistd.h>
++
++#define CREATE_TRACE_POINTS
++#include <trace/events/sched.h>
++
++#define rt_prio(prio)		unlikely((prio) < MAX_RT_PRIO)
++#define rt_task(p)		rt_prio((p)->prio)
++#define rt_queue(rq)		rt_prio((rq)->rq_prio)
++#define batch_task(p)		(unlikely((p)->policy == SCHED_BATCH))
++#define is_rt_policy(policy)	((policy) == SCHED_FIFO || \
++					(policy) == SCHED_RR)
++#define has_rt_policy(p)	unlikely(is_rt_policy((p)->policy))
++#define idleprio_task(p)	unlikely((p)->policy == SCHED_IDLE)
++#define iso_task(p)		unlikely((p)->policy == SCHED_ISO)
++#define iso_queue(rq)		unlikely((rq)->rq_policy == SCHED_ISO)
++#define ISO_PERIOD		((5 * HZ * num_online_cpus()) + 1)
++
++/*
++ * Convert user-nice values [ -20 ... 0 ... 19 ]
++ * to static priority [ MAX_RT_PRIO..MAX_PRIO-1 ],
++ * and back.
++ */
++#define NICE_TO_PRIO(nice)	(MAX_RT_PRIO + (nice) + 20)
++#define PRIO_TO_NICE(prio)	((prio) - MAX_RT_PRIO - 20)
++#define TASK_NICE(p)		PRIO_TO_NICE((p)->static_prio)
++
++/*
++ * 'User priority' is the nice value converted to something we
++ * can work with better when scaling various scheduler parameters,
++ * it's a [ 0 ... 39 ] range.
++ */
++#define USER_PRIO(p)		((p)-MAX_RT_PRIO)
++#define TASK_USER_PRIO(p)	USER_PRIO((p)->static_prio)
++#define MAX_USER_PRIO		(USER_PRIO(MAX_PRIO))
++#define SCHED_PRIO(p)		((p)+MAX_RT_PRIO)
++
++/* Some helpers for converting to/from various scales.*/
++#define JIFFIES_TO_NS(TIME)	((TIME) * (1000000000 / HZ))
++#define MS_TO_NS(TIME)		((TIME) * 1000000)
++#define MS_TO_US(TIME)		((TIME) * 1000)
++
++#ifdef CONFIG_SMP
++/*
++ * Divide a load by a sched group cpu_power : (load / sg->__cpu_power)
++ * Since cpu_power is a 'constant', we can use a reciprocal divide.
++ */
++static inline u32 sg_div_cpu_power(const struct sched_group *sg, u32 load)
++{
++	return reciprocal_divide(load, sg->reciprocal_cpu_power);
++}
++
++/*
++ * Each time a sched group cpu_power is changed,
++ * we must compute its reciprocal value
++ */
++static inline void sg_inc_cpu_power(struct sched_group *sg, u32 val)
++{
++	sg->__cpu_power += val;
++	sg->reciprocal_cpu_power = reciprocal_value(sg->__cpu_power);
++}
++#endif
++
++/*
++ * This is the time all tasks within the same priority round robin.
++ * Value is in ms and set to a minimum of 6ms. Scales with number of cpus.
++ * Tunable via /proc interface.
++ */
++int rr_interval __read_mostly = 6;
++
++/*
++ * sched_iso_cpu - sysctl which determines the cpu percentage SCHED_ISO tasks
++ * are allowed to run five seconds as real time tasks. This is the total over
++ * all online cpus.
++ */
++int sched_iso_cpu __read_mostly = 70;
++
++int prio_ratios[PRIO_RANGE] __read_mostly;
++
++static inline unsigned long timeslice(void)
++{
++	return MS_TO_US(rr_interval);
++}
++
++struct global_rq {
++	spinlock_t lock;
++	unsigned long nr_running;
++	unsigned long nr_uninterruptible;
++	unsigned long long nr_switches;
++	struct list_head queue[PRIO_LIMIT];
++	DECLARE_BITMAP(prio_bitmap, PRIO_LIMIT + 1);
++	unsigned long iso_ticks;
++	unsigned short iso_refractory;
++#ifdef CONFIG_SMP
++	unsigned long qnr; /* queued not running */
++	cpumask_t cpu_idle_map;
++#endif
++};
++
++static struct global_rq grq;
++
++/*
++ * This is the main, per-CPU runqueue data structure.
++ * All this is protected by the global_rq lock.
++ */
++struct rq {
++#ifdef CONFIG_SMP
++#ifdef CONFIG_NO_HZ
++	unsigned char in_nohz_recently;
++#endif
++#endif
++
++	struct task_struct *curr, *idle;
++	struct mm_struct *prev_mm;
++	struct list_head queue; /* Place to store currently running task */
++
++	/* Stored data about rq->curr to work outside grq lock */
++	unsigned long rq_deadline;
++	unsigned int rq_policy;
++	int rq_time_slice;
++	int rq_prio;
++
++	/* Accurate timekeeping data */
++	u64 timekeep_clock;
++	unsigned long user_pc, nice_pc, irq_pc, softirq_pc, system_pc,
++			iowait_pc, idle_pc;
++	atomic_t nr_iowait;
++
++	int cpu;		/* cpu of this runqueue */
++	int online;
++
++#ifdef CONFIG_SMP
++	struct root_domain *rd;
++	struct sched_domain *sd;
++
++	struct list_head migration_queue;
++#endif
++
++	u64 clock;
++#ifdef CONFIG_SCHEDSTATS
++
++	/* latency stats */
++	struct sched_info rq_sched_info;
++	unsigned long long rq_cpu_time;
++	/* could above be rq->cfs_rq.exec_clock + rq->rt_rq.rt_runtime ? */
++
++	/* sys_sched_yield() stats */
++	unsigned int yld_count;
++
++	/* schedule() stats */
++	unsigned int sched_switch;
++	unsigned int sched_count;
++	unsigned int sched_goidle;
++
++	/* try_to_wake_up() stats */
++	unsigned int ttwu_count;
++	unsigned int ttwu_local;
++
++	/* BKL stats */
++	unsigned int bkl_count;
++#endif
++};
++
++static DEFINE_PER_CPU(struct rq, runqueues) ____cacheline_aligned_in_smp;
++static DEFINE_MUTEX(sched_hotcpu_mutex);
++
++#ifdef CONFIG_SMP
++
++/*
++ * We add the notion of a root-domain which will be used to define per-domain
++ * variables. Each exclusive cpuset essentially defines an island domain by
++ * fully partitioning the member cpus from any other cpuset. Whenever a new
++ * exclusive cpuset is created, we also create and attach a new root-domain
++ * object.
++ *
++ */
++struct root_domain {
++	atomic_t refcount;
++	cpumask_var_t span;
++	cpumask_var_t online;
++
++	/*
++	 * The "RT overload" flag: it gets set if a CPU has more than
++	 * one runnable RT task.
++	 */
++	cpumask_var_t rto_mask;
++	atomic_t rto_count;
++#if defined(CONFIG_SCHED_MC) || defined(CONFIG_SCHED_SMT)
++	/*
++	 * Preferred wake up cpu nominated by sched_mc balance that will be
++	 * used when most cpus are idle in the system indicating overall very
++	 * low system utilisation. Triggered at POWERSAVINGS_BALANCE_WAKEUP(2)
++	 */
++	unsigned int sched_mc_preferred_wakeup_cpu;
++#endif
++};
++
++/*
++ * By default the system creates a single root-domain with all cpus as
++ * members (mimicking the global state we have today).
++ */
++static struct root_domain def_root_domain;
++
++#endif
++
++static inline int cpu_of(struct rq *rq)
++{
++#ifdef CONFIG_SMP
++	return rq->cpu;
++#else
++	return 0;
++#endif
++}
++
++/*
++ * The domain tree (rq->sd) is protected by RCU's quiescent state transition.
++ * See detach_destroy_domains: synchronize_sched for details.
++ *
++ * The domain tree of any CPU may only be accessed from within
++ * preempt-disabled sections.
++ */
++#define for_each_domain(cpu, __sd) \
++	for (__sd = rcu_dereference(cpu_rq(cpu)->sd); __sd; __sd = __sd->parent)
++
++#define cpu_rq(cpu)		(&per_cpu(runqueues, (cpu)))
++#define this_rq()		(&__get_cpu_var(runqueues))
++#define task_rq(p)		cpu_rq(task_cpu(p))
++#define cpu_curr(cpu)		(cpu_rq(cpu)->curr)
++
++#include "sched_stats.h"
++
++#ifndef prepare_arch_switch
++# define prepare_arch_switch(next)	do { } while (0)
++#endif
++#ifndef finish_arch_switch
++# define finish_arch_switch(prev)	do { } while (0)
++#endif
++
++inline void update_rq_clock(struct rq *rq)
++{
++	rq->clock = sched_clock_cpu(cpu_of(rq));
++}
++
++static inline int task_running(struct task_struct *p)
++{
++	return (!!p->oncpu);
++}
++
++static inline void grq_lock(void)
++	__acquires(grq.lock)
++{
++	smp_mb();
++	spin_lock(&grq.lock);
++}
++
++static inline void grq_unlock(void)
++	__releases(grq.lock)
++{
++	spin_unlock(&grq.lock);
++}
++
++static inline void grq_lock_irq(void)
++	__acquires(grq.lock)
++{
++	smp_mb();
++	spin_lock_irq(&grq.lock);
++}
++
++static inline void time_lock_grq(struct rq *rq)
++	__acquires(grq.lock)
++{
++	grq_lock();
++	update_rq_clock(rq);
++}
++
++static inline void grq_unlock_irq(void)
++	__releases(grq.lock)
++{
++	spin_unlock_irq(&grq.lock);
++}
++
++static inline void grq_lock_irqsave(unsigned long *flags)
++	__acquires(grq.lock)
++{
++	smp_mb();
++	spin_lock_irqsave(&grq.lock, *flags);
++}
++
++static inline void grq_unlock_irqrestore(unsigned long *flags)
++	__releases(grq.lock)
++{
++	spin_unlock_irqrestore(&grq.lock, *flags);
++}
++
++static inline struct rq
++*task_grq_lock(struct task_struct *p, unsigned long *flags)
++	__acquires(grq.lock)
++{
++	grq_lock_irqsave(flags);
++	return task_rq(p);
++}
++
++static inline struct rq
++*time_task_grq_lock(struct task_struct *p, unsigned long *flags)
++	__acquires(grq.lock)
++{
++	struct rq *rq = task_grq_lock(p, flags);
++	update_rq_clock(rq);
++	return rq;
++}
++
++static inline void task_grq_unlock(unsigned long *flags)
++	__releases(grq.lock)
++{
++	grq_unlock_irqrestore(flags);
++}
++
++/**
++ * runqueue_is_locked
++ *
++ * Returns true if the global runqueue is locked.
++ * This interface allows printk to be called with the runqueue lock
++ * held and know whether or not it is OK to wake up the klogd.
++ */
++int runqueue_is_locked(void)
++{
++	return spin_is_locked(&grq.lock);
++}
++
++void task_rq_unlock_wait(struct task_struct *p)
++	__releases(grq.lock)
++{
++	smp_mb(); /* spin-unlock-wait is not a full memory barrier */
++	spin_unlock_wait(&grq.lock);
++}
++
++static inline void time_grq_lock(struct rq *rq, unsigned long *flags)
++	__acquires(grq.lock)
++{
++	spin_lock_irqsave(&grq.lock, *flags);
++	update_rq_clock(rq);
++}
++
++static inline struct rq *__task_grq_lock(struct task_struct *p)
++	__acquires(grq.lock)
++{
++	grq_lock();
++	return task_rq(p);
++}
++
++static inline void __task_grq_unlock(void)
++	__releases(grq.lock)
++{
++	grq_unlock();
++}
++
++#ifndef __ARCH_WANT_UNLOCKED_CTXSW
++static inline void prepare_lock_switch(struct rq *rq, struct task_struct *next)
++{
++}
++
++static inline void finish_lock_switch(struct rq *rq, struct task_struct *prev)
++{
++#ifdef CONFIG_DEBUG_SPINLOCK
++	/* this is a valid case when another task releases the spinlock */
++	grq.lock.owner = current;
++#endif
++	/*
++	 * If we are tracking spinlock dependencies then we have to
++	 * fix up the runqueue lock - which gets 'carried over' from
++	 * prev into current:
++	 */
++	spin_acquire(&grq.lock.dep_map, 0, 0, _THIS_IP_);
++
++	grq_unlock_irq();
++}
++
++#else /* __ARCH_WANT_UNLOCKED_CTXSW */
++
++static inline void prepare_lock_switch(struct rq *rq, struct task_struct *next)
++{
++#ifdef __ARCH_WANT_INTERRUPTS_ON_CTXSW
++	grq_unlock_irq();
++#else
++	grq_unlock();
++#endif
++}
++
++static inline void finish_lock_switch(struct rq *rq, struct task_struct *prev)
++{
++	smp_wmb();
++#ifndef __ARCH_WANT_INTERRUPTS_ON_CTXSW
++	local_irq_enable();
++#endif
++}
++#endif /* __ARCH_WANT_UNLOCKED_CTXSW */
++
++/*
++ * A task that is queued will be on the grq run list.
++ * A task that is not running or queued will not be on the grq run list.
++ * A task that is currently running will have ->oncpu set and be queued
++ * temporarily in its own rq queue.
++ * A task that is running and no longer queued will be seen only on
++ * context switch exit.
++ */
++
++static inline int task_queued(struct task_struct *p)
++{
++	return (!list_empty(&p->rt.run_list));
++}
++
++static inline int task_queued_only(struct task_struct *p)
++{
++	return (!list_empty(&p->rt.run_list) && !task_running(p));
++}
++
++/*
++ * Removing from the global runqueue. Enter with grq locked.
++ */
++static void dequeue_task(struct task_struct *p)
++{
++	list_del_init(&p->rt.run_list);
++	if (list_empty(grq.queue + p->prio))
++		__clear_bit(p->prio, grq.prio_bitmap);
++}
++
++static inline void reset_first_time_slice(struct task_struct *p)
++{
++	if (unlikely(p->first_time_slice))
++		p->first_time_slice = 0;
++}
++
++static int idleprio_suitable(struct task_struct *p)
++{
++	return (!freezing(p) && !signal_pending(p) &&
++		!(task_contributes_to_load(p)) && !(p->flags & (PF_EXITING)));
++}
++
++static int isoprio_suitable(void)
++{
++	return !grq.iso_refractory;
++}
++
++/*
++ * Adding to the global runqueue. Enter with grq locked.
++ */
++static void enqueue_task(struct task_struct *p)
++{
++	if (!rt_task(p)) {
++		/* Check it hasn't gotten rt from PI */
++		if ((idleprio_task(p) && idleprio_suitable(p)) ||
++		   (iso_task(p) && isoprio_suitable()))
++			p->prio = p->normal_prio;
++		else
++			p->prio = NORMAL_PRIO;
++	}
++	__set_bit(p->prio, grq.prio_bitmap);
++	list_add_tail(&p->rt.run_list, grq.queue + p->prio);
++	sched_info_queued(p);
++}
++
++/* Only idle task does this as a real time task*/
++static inline void enqueue_task_head(struct task_struct *p)
++{
++	__set_bit(p->prio, grq.prio_bitmap);
++	list_add(&p->rt.run_list, grq.queue + p->prio);
++	sched_info_queued(p);
++}
++
++static inline void requeue_task(struct task_struct *p)
++{
++	sched_info_queued(p);
++}
++
++static inline int pratio(struct task_struct *p)
++{
++	return prio_ratios[TASK_USER_PRIO(p)];
++}
++
++/*
++ * task_timeslice - all tasks of all priorities get the exact same timeslice
++ * length. CPU distribution is handled by giving different deadlines to
++ * tasks of different priorities.
++ */
++static inline int task_timeslice(struct task_struct *p)
++{
++	return (rr_interval * pratio(p) / 100);
++}
++
++#ifdef CONFIG_SMP
++static inline void inc_qnr(void)
++{
++	grq.qnr++;
++}
++
++static inline void dec_qnr(void)
++{
++	grq.qnr--;
++}
++
++static inline int queued_notrunning(void)
++{
++	return grq.qnr;
++}
++#else
++static inline void inc_qnr(void)
++{
++}
++
++static inline void dec_qnr(void)
++{
++}
++
++static inline int queued_notrunning(void)
++{
++	return grq.nr_running;
++}
++#endif
++
++/*
++ * activate_idle_task - move idle task to the _front_ of runqueue.
++ */
++static inline void activate_idle_task(struct task_struct *p)
++{
++	enqueue_task_head(p);
++	grq.nr_running++;
++	inc_qnr();
++}
++
++static inline int normal_prio(struct task_struct *p)
++{
++	if (has_rt_policy(p))
++		return MAX_RT_PRIO - 1 - p->rt_priority;
++	if (idleprio_task(p))
++		return IDLE_PRIO;
++	if (iso_task(p))
++		return ISO_PRIO;
++	return NORMAL_PRIO;
++}
++
++/*
++ * Calculate the current priority, i.e. the priority
++ * taken into account by the scheduler. This value might
++ * be boosted by RT tasks as it will be RT if the task got
++ * RT-boosted. If not then it returns p->normal_prio.
++ */
++static int effective_prio(struct task_struct *p)
++{
++	p->normal_prio = normal_prio(p);
++	/*
++	 * If we are RT tasks or we were boosted to RT priority,
++	 * keep the priority unchanged. Otherwise, update priority
++	 * to the normal priority:
++	 */
++	if (!rt_prio(p->prio))
++		return p->normal_prio;
++	return p->prio;
++}
++
++/*
++ * activate_task - move a task to the runqueue. Enter with grq locked. The rq
++ * doesn't really matter but gives us the local clock.
++ */
++static void activate_task(struct task_struct *p, struct rq *rq)
++{
++	u64 now = rq->clock;
++
++	/*
++	 * Sleep time is in units of nanosecs, so shift by 20 to get a
++	 * milliseconds-range estimation of the amount of time that the task
++	 * spent sleeping:
++	 */
++	if (unlikely(prof_on == SLEEP_PROFILING)) {
++		if (p->state == TASK_UNINTERRUPTIBLE)
++			profile_hits(SLEEP_PROFILING, (void *)get_wchan(p),
++				     (now - p->timestamp) >> 20);
++	}
++
++	p->prio = effective_prio(p);
++	p->timestamp = now;
++	if (task_contributes_to_load(p))
++		grq.nr_uninterruptible--;
++	enqueue_task(p);
++	grq.nr_running++;
++	inc_qnr();
++}
++
++/*
++ * deactivate_task - If it's running, it's not on the grq and we can just
++ * decrement the nr_running.
++ */
++static inline void deactivate_task(struct task_struct *p)
++{
++	if (task_contributes_to_load(p))
++		grq.nr_uninterruptible++;
++	grq.nr_running--;
++}
++
++#ifdef CONFIG_SMP
++void set_task_cpu(struct task_struct *p, unsigned int cpu)
++{
++	trace_sched_migrate_task(p, cpu);
++	/*
++	 * After ->cpu is set up to a new value, task_grq_lock(p, ...) can be
++	 * successfuly executed on another CPU. We must ensure that updates of
++	 * per-task data have been completed by this moment.
++	 */
++	smp_wmb();
++	task_thread_info(p)->cpu = cpu;
++}
++#endif
++
++/*
++ * Move a task off the global queue and take it to a cpu for it will
++ * become the running task.
++ */
++static inline void take_task(struct rq *rq, struct task_struct *p)
++{
++	set_task_cpu(p, rq->cpu);
++	dequeue_task(p);
++	list_add(&p->rt.run_list, &rq->queue);
++	dec_qnr();
++}
++
++/*
++ * Returns a descheduling task to the grq runqueue unless it is being
++ * deactivated.
++ */
++static inline void return_task(struct task_struct *p, int deactivate)
++{
++	list_del_init(&p->rt.run_list);
++	if (deactivate)
++		deactivate_task(p);
++	else {
++		inc_qnr();
++		enqueue_task(p);
++	}
++}
++
++/*
++ * resched_task - mark a task 'to be rescheduled now'.
++ *
++ * On UP this means the setting of the need_resched flag, on SMP it
++ * might also involve a cross-CPU call to trigger the scheduler on
++ * the target CPU.
++ */
++#ifdef CONFIG_SMP
++
++#ifndef tsk_is_polling
++#define tsk_is_polling(t) test_tsk_thread_flag(t, TIF_POLLING_NRFLAG)
++#endif
++
++static void resched_task(struct task_struct *p)
++{
++	int cpu;
++
++	assert_spin_locked(&grq.lock);
++
++	if (unlikely(test_tsk_thread_flag(p, TIF_NEED_RESCHED)))
++		return;
++
++	set_tsk_thread_flag(p, TIF_NEED_RESCHED);
++
++	cpu = task_cpu(p);
++	if (cpu == smp_processor_id())
++		return;
++
++	/* NEED_RESCHED must be visible before we test polling */
++	smp_mb();
++	if (!tsk_is_polling(p))
++		smp_send_reschedule(cpu);
++}
++
++#else
++static inline void resched_task(struct task_struct *p)
++{
++	assert_spin_locked(&grq.lock);
++	set_tsk_need_resched(p);
++}
++#endif
++
++/**
++ * task_curr - is this task currently executing on a CPU?
++ * @p: the task in question.
++ */
++inline int task_curr(const struct task_struct *p)
++{
++	return cpu_curr(task_cpu(p)) == p;
++}
++
++#ifdef CONFIG_SMP
++struct migration_req {
++	struct list_head list;
++
++	struct task_struct *task;
++	int dest_cpu;
++
++	struct completion done;
++};
++
++/*
++ * wait_task_context_switch -	wait for a thread to complete at least one
++ *				context switch.
++ *
++ * @p must not be current.
++ */
++void wait_task_context_switch(struct task_struct *p)
++{
++	unsigned long nvcsw, nivcsw, flags;
++	int running;
++	struct rq *rq;
++
++	nvcsw	= p->nvcsw;
++	nivcsw	= p->nivcsw;
++	for (;;) {
++		/*
++		 * The runqueue is assigned before the actual context
++		 * switch. We need to take the runqueue lock.
++		 *
++		 * We could check initially without the lock but it is
++		 * very likely that we need to take the lock in every
++		 * iteration.
++		 */
++		rq = task_grq_lock(p, &flags);
++		running = task_running(p);
++		task_grq_unlock(&flags);
++
++		if (likely(!running))
++			break;
++		/*
++		 * The switch count is incremented before the actual
++		 * context switch. We thus wait for two switches to be
++		 * sure at least one completed.
++		 */
++		if ((p->nvcsw - nvcsw) > 1)
++			break;
++		if ((p->nivcsw - nivcsw) > 1)
++			break;
++
++		cpu_relax();
++	}
++}
++
++/*
++ * wait_task_inactive - wait for a thread to unschedule.
++ *
++ * If @match_state is nonzero, it's the @p->state value just checked and
++ * not expected to change.  If it changes, i.e. @p might have woken up,
++ * then return zero.  When we succeed in waiting for @p to be off its CPU,
++ * we return a positive number (its total switch count).  If a second call
++ * a short while later returns the same number, the caller can be sure that
++ * @p has remained unscheduled the whole time.
++ *
++ * The caller must ensure that the task *will* unschedule sometime soon,
++ * else this function might spin for a *long* time. This function can't
++ * be called with interrupts off, or it may introduce deadlock with
++ * smp_call_function() if an IPI is sent by the same process we are
++ * waiting to become inactive.
++ */
++unsigned long wait_task_inactive(struct task_struct *p, long match_state)
++{
++	unsigned long flags;
++	int running, on_rq;
++	unsigned long ncsw;
++	struct rq *rq;
++
++	for (;;) {
++		/*
++		 * We do the initial early heuristics without holding
++		 * any task-queue locks at all. We'll only try to get
++		 * the runqueue lock when things look like they will
++		 * work out!
++		 */
++		rq = task_rq(p);
++
++		/*
++		 * If the task is actively running on another CPU
++		 * still, just relax and busy-wait without holding
++		 * any locks.
++		 *
++		 * NOTE! Since we don't hold any locks, it's not
++		 * even sure that "rq" stays as the right runqueue!
++		 * But we don't care, since this will
++		 * return false if the runqueue has changed and p
++		 * is actually now running somewhere else!
++		 */
++		while (task_running(p) && p == rq->curr) {
++			if (match_state && unlikely(p->state != match_state))
++				return 0;
++			cpu_relax();
++		}
++
++		/*
++		 * Ok, time to look more closely! We need the grq
++		 * lock now, to be *sure*. If we're wrong, we'll
++		 * just go back and repeat.
++		 */
++		rq = task_grq_lock(p, &flags);
++		trace_sched_wait_task(rq, p);
++		running = task_running(p);
++		on_rq = task_queued(p);
++		ncsw = 0;
++		if (!match_state || p->state == match_state)
++			ncsw = p->nvcsw | LONG_MIN; /* sets MSB */
++		task_grq_unlock(&flags);
++
++		/*
++		 * If it changed from the expected state, bail out now.
++		 */
++		if (unlikely(!ncsw))
++			break;
++
++		/*
++		 * Was it really running after all now that we
++		 * checked with the proper locks actually held?
++		 *
++		 * Oops. Go back and try again..
++		 */
++		if (unlikely(running)) {
++			cpu_relax();
++			continue;
++		}
++
++		/*
++		 * It's not enough that it's not actively running,
++		 * it must be off the runqueue _entirely_, and not
++		 * preempted!
++		 *
++		 * So if it was still runnable (but just not actively
++		 * running right now), it's preempted, and we should
++		 * yield - it could be a while.
++		 */
++		if (unlikely(on_rq)) {
++			schedule_timeout_uninterruptible(1);
++			continue;
++		}
++
++		/*
++		 * Ahh, all good. It wasn't running, and it wasn't
++		 * runnable, which means that it will never become
++		 * running in the future either. We're all done!
++		 */
++		break;
++	}
++
++	return ncsw;
++}
++
++/***
++ * kick_process - kick a running thread to enter/exit the kernel
++ * @p: the to-be-kicked thread
++ *
++ * Cause a process which is running on another CPU to enter
++ * kernel-mode, without any delay. (to get signals handled.)
++ *
++ * NOTE: this function doesnt have to take the runqueue lock,
++ * because all it wants to ensure is that the remote task enters
++ * the kernel. If the IPI races and the task has been migrated
++ * to another CPU then no harm is done and the purpose has been
++ * achieved as well.
++ */
++void kick_process(struct task_struct *p)
++{
++	int cpu;
++
++	preempt_disable();
++	cpu = task_cpu(p);
++	if ((cpu != smp_processor_id()) && task_curr(p))
++		smp_send_reschedule(cpu);
++	preempt_enable();
++}
++EXPORT_SYMBOL_GPL(kick_process);
++#endif
++
++#define rq_idle(rq)	((rq)->rq_prio == PRIO_LIMIT)
++
++/*
++ * RT tasks preempt purely on priority. SCHED_NORMAL tasks preempt on the
++ * basis of earlier deadlines. SCHED_BATCH and SCHED_IDLE don't preempt,
++ * they cooperatively multitask.
++ */
++static inline int task_preempts_curr(struct task_struct *p, struct rq *rq)
++{
++	int preempts = 0;
++
++	if (p->prio < rq->rq_prio)
++		preempts = 1;
++	else if (p->policy == SCHED_NORMAL && (p->prio == rq->rq_prio &&
++		 time_before(p->deadline, rq->rq_deadline)))
++			preempts = 1;
++	return preempts;
++}
++
++/*
++ * Wake up *any* suitable cpu to schedule this task.
++ */
++static void try_preempt(struct task_struct *p)
++{
++	struct rq *highest_prio_rq, *this_rq;
++	unsigned long latest_deadline, cpu;
++	int highest_prio;
++	cpumask_t tmp;
++
++	/* Try the task's previous rq first and as a fallback */
++	this_rq = task_rq(p);
++
++	if (cpu_isset(this_rq->cpu, p->cpus_allowed)) {
++		highest_prio_rq = this_rq;
++		/* If this_rq is idle, use that. */
++		if (rq_idle(this_rq))
++			goto found_rq;
++	} else
++		highest_prio_rq = cpu_rq(any_online_cpu(p->cpus_allowed));
++	latest_deadline = this_rq->rq_deadline;
++	highest_prio = this_rq->rq_prio;
++
++	cpus_and(tmp, cpu_online_map, p->cpus_allowed);
++
++	for_each_cpu_mask(cpu, tmp) {
++		struct rq *rq;
++		int rq_prio;
++
++		rq = cpu_rq(cpu);
++
++		if (rq_idle(rq)) {
++			/* found an idle rq, use that one */
++			highest_prio_rq = rq;
++			goto found_rq;
++		}
++
++		rq_prio = rq->rq_prio;
++		if (rq_prio > highest_prio ||
++			(rq_prio == highest_prio &&
++			time_after(rq->rq_deadline, latest_deadline))) {
++				highest_prio = rq_prio;
++				latest_deadline = rq->rq_deadline;
++				highest_prio_rq = rq;
++		}
++	}
++
++	if (!task_preempts_curr(p, highest_prio_rq))
++		return;
++found_rq:
++	resched_task(highest_prio_rq->curr);
++	return;
++}
++
++/**
++ * task_oncpu_function_call - call a function on the cpu on which a task runs
++ * @p:		the task to evaluate
++ * @func:	the function to be called
++ * @info:	the function call argument
++ *
++ * Calls the function @func when the task is currently running. This might
++ * be on the current CPU, which just calls the function directly
++ */
++void task_oncpu_function_call(struct task_struct *p,
++			      void (*func) (void *info), void *info)
++{
++	int cpu;
++
++	preempt_disable();
++	cpu = task_cpu(p);
++	if (task_curr(p))
++		smp_call_function_single(cpu, func, info, 1);
++	preempt_enable();
++}
++
++#ifdef CONFIG_SMP
++static int suitable_idle_cpus(struct task_struct *p)
++{
++	return (cpus_intersects(p->cpus_allowed, grq.cpu_idle_map));
++}
++#else
++static int suitable_idle_cpus(struct task_struct *p)
++{
++	return 0;
++}
++#endif
++
++/***
++ * try_to_wake_up - wake up a thread
++ * @p: the to-be-woken-up thread
++ * @state: the mask of task states that can be woken
++ * @sync: do a synchronous wakeup?
++ *
++ * Put it on the run-queue if it's not already there. The "current"
++ * thread is always on the run-queue (except when the actual
++ * re-schedule is in progress), and as such you're allowed to do
++ * the simpler "current->state = TASK_RUNNING" to mark yourself
++ * runnable without the overhead of this.
++ *
++ * returns failure only if the task is already active.
++ */
++static int try_to_wake_up(struct task_struct *p, unsigned int state, int sync)
++{
++	unsigned long flags;
++	int success = 0;
++	long old_state;
++	struct rq *rq;
++
++	rq = time_task_grq_lock(p, &flags);
++	old_state = p->state;
++	if (!(old_state & state))
++		goto out_unlock;
++
++	/*
++	 * Note this catches tasks that are running and queued, but returns
++	 * false during the context switch when they're running and no
++	 * longer queued.
++	 */
++	if (task_queued(p))
++		goto out_running;
++
++	activate_task(p, rq);
++	/*
++	 * Sync wakeups (i.e. those types of wakeups where the waker
++	 * has indicated that it will leave the CPU in short order)
++	 * don't trigger a preemption if there are no idle cpus,
++	 * instead waiting for current to deschedule.
++	 */
++	if (!sync || (sync && suitable_idle_cpus(p)))
++		try_preempt(p);
++	success = 1;
++
++out_running:
++	trace_sched_wakeup(rq, p, success);
++	p->state = TASK_RUNNING;
++out_unlock:
++	task_grq_unlock(&flags);
++	return success;
++}
++
++/**
++ * wake_up_process - Wake up a specific process
++ * @p: The process to be woken up.
++ *
++ * Attempt to wake up the nominated process and move it to the set of runnable
++ * processes.  Returns 1 if the process was woken up, 0 if it was already
++ * running.
++ *
++ * It may be assumed that this function implies a write memory barrier before
++ * changing the task state if and only if any tasks are woken up.
++ */
++int wake_up_process(struct task_struct *p)
++{
++	return try_to_wake_up(p, TASK_ALL, 0);
++}
++EXPORT_SYMBOL(wake_up_process);
++
++int wake_up_state(struct task_struct *p, unsigned int state)
++{
++	return try_to_wake_up(p, state, 0);
++}
++
++/*
++ * Perform scheduler related setup for a newly forked process p.
++ * p is forked by current.
++ */
++void sched_fork(struct task_struct *p, int clone_flags)
++{
++	int cpu = get_cpu();
++	struct rq *rq;
++
++#ifdef CONFIG_PREEMPT_NOTIFIERS
++	INIT_HLIST_HEAD(&p->preempt_notifiers);
++#endif
++	/*
++	 * We mark the process as running here, but have not actually
++	 * inserted it onto the runqueue yet. This guarantees that
++	 * nobody will actually run it, and a signal or other external
++	 * event cannot wake it up and insert it on the runqueue either.
++	 */
++	p->state = TASK_RUNNING;
++	set_task_cpu(p, cpu);
++
++	/* Should be reset in fork.c but done here for ease of bfs patching */
++	p->se.sum_exec_runtime = p->stime_pc = p->utime_pc = 0;
++
++	/*
++	 * Make sure we do not leak PI boosting priority to the child:
++	 */
++	p->prio = current->normal_prio;
++
++	INIT_LIST_HEAD(&p->rt.run_list);
++#if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
++	if (unlikely(sched_info_on()))
++		memset(&p->sched_info, 0, sizeof(p->sched_info));
++#endif
++
++	p->oncpu = 0;
++
++#ifdef CONFIG_PREEMPT
++	/* Want to start with kernel preemption disabled. */
++	task_thread_info(p)->preempt_count = 1;
++#endif
++	if (unlikely(p->policy == SCHED_FIFO))
++		goto out;
++	/*
++	 * Share the timeslice between parent and child, thus the
++	 * total amount of pending timeslices in the system doesn't change,
++	 * resulting in more scheduling fairness. If it's negative, it won't
++	 * matter since that's the same as being 0. current's time_slice is
++	 * actually in rq_time_slice when it's running.
++	 */
++	local_irq_disable();
++	rq = task_rq(current);
++	if (likely(rq->rq_time_slice > 0)) {
++		rq->rq_time_slice /= 2;
++		/*
++		 * The remainder of the first timeslice might be recovered by
++		 * the parent if the child exits early enough.
++		 */
++		p->first_time_slice = 1;
++	}
++	p->rt.time_slice = rq->rq_time_slice;
++	local_irq_enable();
++out:
++	put_cpu();
++}
++
++/*
++ * wake_up_new_task - wake up a newly created task for the first time.
++ *
++ * This function will do some initial scheduler statistics housekeeping
++ * that must be done for every newly created context, then puts the task
++ * on the runqueue and wakes it.
++ */
++void wake_up_new_task(struct task_struct *p, unsigned long clone_flags)
++{
++	struct task_struct *parent;
++	unsigned long flags;
++	struct rq *rq;
++
++	rq = time_task_grq_lock(p, &flags); ;
++	parent = p->parent;
++	BUG_ON(p->state != TASK_RUNNING);
++	set_task_cpu(p, task_cpu(parent));
++
++	activate_task(p, rq);
++	trace_sched_wakeup_new(rq, p, 1);
++	if (!(clone_flags & CLONE_VM) && rq->curr == parent &&
++		!suitable_idle_cpus(p)) {
++		/*
++		 * The VM isn't cloned, so we're in a good position to
++		 * do child-runs-first in anticipation of an exec. This
++		 * usually avoids a lot of COW overhead.
++		 */
++			resched_task(parent);
++	} else
++		try_preempt(p);
++	task_grq_unlock(&flags);
++}
++
++/*
++ * Potentially available exiting-child timeslices are
++ * retrieved here - this way the parent does not get
++ * penalized for creating too many threads.
++ *
++ * (this cannot be used to 'generate' timeslices
++ * artificially, because any timeslice recovered here
++ * was given away by the parent in the first place.)
++ */
++void sched_exit(struct task_struct *p)
++{
++	struct task_struct *parent;
++	unsigned long flags;
++	struct rq *rq;
++
++	if (p->first_time_slice) {
++		parent = p->parent;
++		rq = task_grq_lock(parent, &flags);
++		parent->rt.time_slice += p->rt.time_slice;
++		if (unlikely(parent->rt.time_slice > timeslice()))
++			parent->rt.time_slice = timeslice();
++		task_grq_unlock(&flags);
++	}
++}
++
++#ifdef CONFIG_PREEMPT_NOTIFIERS
++
++/**
++ * preempt_notifier_register - tell me when current is being preempted & rescheduled
++ * @notifier: notifier struct to register
++ */
++void preempt_notifier_register(struct preempt_notifier *notifier)
++{
++	hlist_add_head(&notifier->link, &current->preempt_notifiers);
++}
++EXPORT_SYMBOL_GPL(preempt_notifier_register);
++
++/**
++ * preempt_notifier_unregister - no longer interested in preemption notifications
++ * @notifier: notifier struct to unregister
++ *
++ * This is safe to call from within a preemption notifier.
++ */
++void preempt_notifier_unregister(struct preempt_notifier *notifier)
++{
++	hlist_del(&notifier->link);
++}
++EXPORT_SYMBOL_GPL(preempt_notifier_unregister);
++
++static void fire_sched_in_preempt_notifiers(struct task_struct *curr)
++{
++	struct preempt_notifier *notifier;
++	struct hlist_node *node;
++
++	hlist_for_each_entry(notifier, node, &curr->preempt_notifiers, link)
++		notifier->ops->sched_in(notifier, raw_smp_processor_id());
++}
++
++static void
++fire_sched_out_preempt_notifiers(struct task_struct *curr,
++				 struct task_struct *next)
++{
++	struct preempt_notifier *notifier;
++	struct hlist_node *node;
++
++	hlist_for_each_entry(notifier, node, &curr->preempt_notifiers, link)
++		notifier->ops->sched_out(notifier, next);
++}
++
++#else /* !CONFIG_PREEMPT_NOTIFIERS */
++
++static void fire_sched_in_preempt_notifiers(struct task_struct *curr)
++{
++}
++
++static void
++fire_sched_out_preempt_notifiers(struct task_struct *curr,
++				 struct task_struct *next)
++{
++}
++
++#endif /* CONFIG_PREEMPT_NOTIFIERS */
++
++/**
++ * prepare_task_switch - prepare to switch tasks
++ * @rq: the runqueue preparing to switch
++ * @next: the task we are going to switch to.
++ *
++ * This is called with the rq lock held and interrupts off. It must
++ * be paired with a subsequent finish_task_switch after the context
++ * switch.
++ *
++ * prepare_task_switch sets up locking and calls architecture specific
++ * hooks.
++ */
++static inline void
++prepare_task_switch(struct rq *rq, struct task_struct *prev,
++		    struct task_struct *next)
++{
++	fire_sched_out_preempt_notifiers(prev, next);
++	prepare_lock_switch(rq, next);
++	prepare_arch_switch(next);
++}
++
++/**
++ * finish_task_switch - clean up after a task-switch
++ * @rq: runqueue associated with task-switch
++ * @prev: the thread we just switched away from.
++ *
++ * finish_task_switch must be called after the context switch, paired
++ * with a prepare_task_switch call before the context switch.
++ * finish_task_switch will reconcile locking set up by prepare_task_switch,
++ * and do any other architecture-specific cleanup actions.
++ *
++ * Note that we may have delayed dropping an mm in context_switch(). If
++ * so, we finish that here outside of the runqueue lock.  (Doing it
++ * with the lock held can cause deadlocks; see schedule() for
++ * details.)
++ */
++static inline void finish_task_switch(struct rq *rq, struct task_struct *prev)
++	__releases(grq.lock)
++{
++	struct mm_struct *mm = rq->prev_mm;
++	long prev_state;
++
++	rq->prev_mm = NULL;
++
++	/*
++	 * A task struct has one reference for the use as "current".
++	 * If a task dies, then it sets TASK_DEAD in tsk->state and calls
++	 * schedule one last time. The schedule call will never return, and
++	 * the scheduled task must drop that reference.
++	 * The test for TASK_DEAD must occur while the runqueue locks are
++	 * still held, otherwise prev could be scheduled on another cpu, die
++	 * there before we look at prev->state, and then the reference would
++	 * be dropped twice.
++	 *		Manfred Spraul <manfred@colorfullife.com>
++	 */
++	prev_state = prev->state;
++	finish_arch_switch(prev);
++	perf_counter_task_sched_in(current, cpu_of(rq));
++	finish_lock_switch(rq, prev);
++
++	fire_sched_in_preempt_notifiers(current);
++	if (mm)
++		mmdrop(mm);
++	if (unlikely(prev_state == TASK_DEAD)) {
++		/*
++		 * Remove function-return probe instances associated with this
++		 * task and put them back on the free list.
++	 	 */
++		kprobe_flush_task(prev);
++		put_task_struct(prev);
++	}
++}
++
++/**
++ * schedule_tail - first thing a freshly forked thread must call.
++ * @prev: the thread we just switched away from.
++ */
++asmlinkage void schedule_tail(struct task_struct *prev)
++	__releases(grq.lock)
++{
++	struct rq *rq = this_rq();
++
++	finish_task_switch(rq, prev);
++#ifdef __ARCH_WANT_UNLOCKED_CTXSW
++	/* In this case, finish_task_switch does not reenable preemption */
++	preempt_enable();
++#endif
++	if (current->set_child_tid)
++		put_user(current->pid, current->set_child_tid);
++}
++
++/*
++ * context_switch - switch to the new MM and the new
++ * thread's register state.
++ */
++static inline void
++context_switch(struct rq *rq, struct task_struct *prev,
++	       struct task_struct *next)
++{
++	struct mm_struct *mm, *oldmm;
++
++	prepare_task_switch(rq, prev, next);
++	trace_sched_switch(rq, prev, next);
++	mm = next->mm;
++	oldmm = prev->active_mm;
++	/*
++	 * For paravirt, this is coupled with an exit in switch_to to
++	 * combine the page table reload and the switch backend into
++	 * one hypercall.
++	 */
++	arch_start_context_switch(prev);
++
++	if (unlikely(!mm)) {
++		next->active_mm = oldmm;
++		atomic_inc(&oldmm->mm_count);
++		enter_lazy_tlb(oldmm, next);
++	} else
++		switch_mm(oldmm, mm, next);
++
++	if (unlikely(!prev->mm)) {
++		prev->active_mm = NULL;
++		rq->prev_mm = oldmm;
++	}
++	/*
++	 * Since the runqueue lock will be released by the next
++	 * task (which is an invalid locking op but in the case
++	 * of the scheduler it's an obvious special-case), so we
++	 * do an early lockdep release here:
++	 */
++#ifndef __ARCH_WANT_UNLOCKED_CTXSW
++	spin_release(&grq.lock.dep_map, 1, _THIS_IP_);
++#endif
++
++	/* Here we just switch the register state and the stack. */
++	switch_to(prev, next, prev);
++
++	barrier();
++	/*
++	 * this_rq must be evaluated again because prev may have moved
++	 * CPUs since it called schedule(), thus the 'rq' on its stack
++	 * frame will be invalid.
++	 */
++	finish_task_switch(this_rq(), prev);
++}
++
++/*
++ * nr_running, nr_uninterruptible and nr_context_switches:
++ *
++ * externally visible scheduler statistics: current number of runnable
++ * threads, current number of uninterruptible-sleeping threads, total
++ * number of context switches performed since bootup. All are measured
++ * without grabbing the grq lock but the occasional inaccurate result
++ * doesn't matter so long as it's positive.
++ */
++unsigned long nr_running(void)
++{
++	long nr = grq.nr_running;
++
++	if (unlikely(nr < 0))
++		nr = 0;
++	return (unsigned long)nr;
++}
++
++unsigned long nr_uninterruptible(void)
++{
++	unsigned long nu = grq.nr_uninterruptible;
++
++	if (unlikely(nu < 0))
++		nu = 0;
++	return nu;
++}
++
++unsigned long long nr_context_switches(void)
++{
++	long long ns = grq.nr_switches;
++
++	/* This is of course impossible */
++	if (unlikely(ns < 0))
++		ns = 1;
++	return (long long)ns;
++}
++
++unsigned long nr_iowait(void)
++{
++	unsigned long i, sum = 0;
++
++	for_each_possible_cpu(i)
++		sum += atomic_read(&cpu_rq(i)->nr_iowait);
++
++	return sum;
++}
++
++unsigned long nr_active(void)
++{
++	return nr_running() + nr_uninterruptible();
++}
++
++/* Variables and functions for calc_load */
++static unsigned long calc_load_update;
++unsigned long avenrun[3];
++EXPORT_SYMBOL(avenrun);
++
++/**
++ * get_avenrun - get the load average array
++ * @loads:	pointer to dest load array
++ * @offset:	offset to add
++ * @shift:	shift count to shift the result left
++ *
++ * These values are estimates at best, so no need for locking.
++ */
++void get_avenrun(unsigned long *loads, unsigned long offset, int shift)
++{
++	loads[0] = (avenrun[0] + offset) << shift;
++	loads[1] = (avenrun[1] + offset) << shift;
++	loads[2] = (avenrun[2] + offset) << shift;
++}
++
++static unsigned long
++calc_load(unsigned long load, unsigned long exp, unsigned long active)
++{
++	load *= exp;
++	load += active * (FIXED_1 - exp);
++	return load >> FSHIFT;
++}
++
++/*
++ * calc_load - update the avenrun load estimates every LOAD_FREQ seconds.
++ */
++void calc_global_load(void)
++{
++	long active;
++
++	if (time_before(jiffies, calc_load_update))
++		return;
++	active = nr_active() * FIXED_1;
++
++	avenrun[0] = calc_load(avenrun[0], EXP_1, active);
++	avenrun[1] = calc_load(avenrun[1], EXP_5, active);
++	avenrun[2] = calc_load(avenrun[2], EXP_15, active);
++
++	calc_load_update = jiffies + LOAD_FREQ;
++}
++
++DEFINE_PER_CPU(struct kernel_stat, kstat);
++
++EXPORT_PER_CPU_SYMBOL(kstat);
++
++/*
++ * On each tick, see what percentage of that tick was attributed to each
++ * component and add the percentage to the _pc values. Once a _pc value has
++ * accumulated one tick's worth, account for that. This means the total
++ * percentage of load components will always be 100 per tick.
++ */
++static void pc_idle_time(struct rq *rq, unsigned long pc)
++{
++	struct cpu_usage_stat *cpustat = &kstat_this_cpu.cpustat;
++	cputime64_t tmp = cputime_to_cputime64(jiffies_to_cputime(1));
++
++	if (atomic_read(&rq->nr_iowait) > 0) {
++		rq->iowait_pc += pc;
++		if (rq->iowait_pc >= 100) {
++			rq->iowait_pc %= 100;
++			cpustat->iowait = cputime64_add(cpustat->iowait, tmp);
++		}
++	} else {
++		rq->idle_pc += pc;
++		if (rq->idle_pc >= 100) {
++			rq->idle_pc %= 100;
++			cpustat->idle = cputime64_add(cpustat->idle, tmp);
++		}
++	}
++}
++
++static void
++pc_system_time(struct rq *rq, struct task_struct *p, int hardirq_offset,
++	       unsigned long pc, unsigned long ns)
++{
++	struct cpu_usage_stat *cpustat = &kstat_this_cpu.cpustat;
++	cputime_t one_jiffy = jiffies_to_cputime(1);
++	cputime_t one_jiffy_scaled = cputime_to_scaled(one_jiffy);
++	cputime64_t tmp = cputime_to_cputime64(one_jiffy);
++
++	p->stime_pc += pc;
++	if (p->stime_pc >= 100) {
++		p->stime_pc -= 100;
++		p->stime = cputime_add(p->stime, one_jiffy);
++		p->stimescaled = cputime_add(p->stimescaled, one_jiffy_scaled);
++		account_group_system_time(p, one_jiffy);
++		acct_update_integrals(p);
++	}
++	p->se.sum_exec_runtime += ns;
++
++	if (hardirq_count() - hardirq_offset)
++		rq->irq_pc += pc;
++	else if (softirq_count()) {
++		rq->softirq_pc += pc;
++		if (rq->softirq_pc >= 100) {
++			rq->softirq_pc %= 100;
++			cpustat->softirq = cputime64_add(cpustat->softirq, tmp);
++		}
++	} else {
++		rq->system_pc += pc;
++		if (rq->system_pc >= 100) {
++			rq->system_pc %= 100;
++			cpustat->system = cputime64_add(cpustat->system, tmp);
++		}
++	}
++}
++
++static void pc_user_time(struct rq *rq, struct task_struct *p,
++			 unsigned long pc, unsigned long ns)
++{
++	struct cpu_usage_stat *cpustat = &kstat_this_cpu.cpustat;
++	cputime_t one_jiffy = jiffies_to_cputime(1);
++	cputime_t one_jiffy_scaled = cputime_to_scaled(one_jiffy);
++	cputime64_t tmp = cputime_to_cputime64(one_jiffy);
++
++	p->utime_pc += pc;
++	if (p->utime_pc >= 100) {
++		p->utime_pc -= 100;
++		p->utime = cputime_add(p->utime, one_jiffy);
++		p->utimescaled = cputime_add(p->utimescaled, one_jiffy_scaled);
++		account_group_user_time(p, one_jiffy);
++		acct_update_integrals(p);
++	}
++	p->se.sum_exec_runtime += ns;
++
++	if (TASK_NICE(p) > 0 || idleprio_task(p)) {
++		rq->nice_pc += pc;
++		if (rq->nice_pc >= 100) {
++			rq->nice_pc %= 100;
++			cpustat->nice = cputime64_add(cpustat->nice, tmp);
++		}
++	} else {
++		rq->user_pc += pc;
++		if (rq->user_pc >= 100) {
++			rq->user_pc %= 100;
++			cpustat->user = cputime64_add(cpustat->user, tmp);
++		}
++	}
++}
++
++/* Convert nanoseconds to percentage of one tick. */
++#define NS_TO_PC(NS)	(NS * 100 / JIFFIES_TO_NS(1))
++
++/*
++ * This is called on clock ticks and on context switches.
++ * Bank in p->se.sum_exec_runtime the ns elapsed since the last tick or switch.
++ * CPU scheduler quota accounting is also performed here in microseconds.
++ * The value returned from sched_clock() occasionally gives bogus values so
++ * some sanity checking is required. Time is supposed to be banked all the
++ * time so default to half a tick to make up for when sched_clock reverts
++ * to just returning jiffies, and for hardware that can't do tsc.
++ */
++static void
++update_cpu_clock(struct rq *rq, struct task_struct *p, int tick)
++{
++	long time_diff = rq->clock - p->last_ran;
++	long account_ns = rq->clock - rq->timekeep_clock;
++	struct task_struct *idle = rq->idle;
++	unsigned long account_pc;
++
++	/*
++	 * There should be less than or equal to one jiffy worth, and not
++	 * negative/overflow. time_diff is only used for internal scheduler
++	 * time_slice accounting.
++	 */
++	if (time_diff <= 0)
++		time_diff = JIFFIES_TO_NS(1) / 2;
++	else if (time_diff > JIFFIES_TO_NS(1))
++		time_diff = JIFFIES_TO_NS(1);
++
++	if (unlikely(account_ns < 0))
++		account_ns = 0;
++
++	account_pc = NS_TO_PC(account_ns);
++
++	if (tick) {
++		int user_tick = user_mode(get_irq_regs());
++
++		/* Accurate tick timekeeping */
++		if (user_tick)
++			pc_user_time(rq, p, account_pc, account_ns);
++		else if (p != idle || (irq_count() != HARDIRQ_OFFSET))
++			pc_system_time(rq, p, HARDIRQ_OFFSET,
++				       account_pc, account_ns);
++		else
++			pc_idle_time(rq, account_pc);
++	} else {
++		/* Accurate subtick timekeeping */
++		if (p == idle)
++			pc_idle_time(rq, account_pc);
++		else
++			pc_user_time(rq, p, account_pc, account_ns);
++	}
++
++	/* time_slice accounting is done in usecs to avoid overflow on 32bit */
++	if (rq->rq_policy != SCHED_FIFO && p != idle)
++		rq->rq_time_slice -= time_diff / 1000;
++	p->last_ran = rq->timekeep_clock = rq->clock;
++}
++
++/*
++ * Return any ns on the sched_clock that have not yet been accounted in
++ * @p in case that task is currently running.
++ *
++ * Called with task_grq_lock() held on @rq.
++ */
++static u64 do_task_delta_exec(struct task_struct *p, struct rq *rq)
++{
++	u64 ns = 0;
++
++	if (p == rq->curr) {
++		update_rq_clock(rq);
++		ns = rq->clock - p->last_ran;
++		if ((s64)ns < 0)
++			ns = 0;
++	}
++
++	return ns;
++}
++
++unsigned long long task_delta_exec(struct task_struct *p)
++{
++	unsigned long flags;
++	struct rq *rq;
++	u64 ns = 0;
++
++	rq = task_grq_lock(p, &flags);
++	ns = do_task_delta_exec(p, rq);
++	task_grq_unlock(&flags);
++
++	return ns;
++}
++
++/*
++ * Return accounted runtime for the task.
++ * In case the task is currently running, return the runtime plus current's
++ * pending runtime that have not been accounted yet.
++ */
++unsigned long long task_sched_runtime(struct task_struct *p)
++{
++	unsigned long flags;
++	struct rq *rq;
++	u64 ns = 0;
++
++	rq = task_grq_lock(p, &flags);
++	ns = p->se.sum_exec_runtime + do_task_delta_exec(p, rq);
++	task_grq_unlock(&flags);
++
++	return ns;
++}
++
++/*
++ * Return sum_exec_runtime for the thread group.
++ * In case the task is currently running, return the sum plus current's
++ * pending runtime that have not been accounted yet.
++ *
++ * Note that the thread group might have other running tasks as well,
++ * so the return value not includes other pending runtime that other
++ * running tasks might have.
++ */
++unsigned long long thread_group_sched_runtime(struct task_struct *p)
++{
++	struct task_cputime totals;
++	unsigned long flags;
++	struct rq *rq;
++	u64 ns;
++
++	rq = task_grq_lock(p, &flags);
++	thread_group_cputime(p, &totals);
++	ns = totals.sum_exec_runtime + do_task_delta_exec(p, rq);
++	task_grq_unlock(&flags);
++
++	return ns;
++}
++
++/* Compatibility crap for removal */
++void account_user_time(struct task_struct *p, cputime_t cputime,
++		       cputime_t cputime_scaled)
++{
++}
++
++void account_idle_time(cputime_t cputime)
++{
++}
++
++/*
++ * Account guest cpu time to a process.
++ * @p: the process that the cpu time gets accounted to
++ * @cputime: the cpu time spent in virtual machine since the last update
++ * @cputime_scaled: cputime scaled by cpu frequency
++ */
++static void account_guest_time(struct task_struct *p, cputime_t cputime,
++			       cputime_t cputime_scaled)
++{
++	cputime64_t tmp;
++	struct cpu_usage_stat *cpustat = &kstat_this_cpu.cpustat;
++
++	tmp = cputime_to_cputime64(cputime);
++
++	/* Add guest time to process. */
++	p->utime = cputime_add(p->utime, cputime);
++	p->utimescaled = cputime_add(p->utimescaled, cputime_scaled);
++	account_group_user_time(p, cputime);
++	p->gtime = cputime_add(p->gtime, cputime);
++
++	/* Add guest time to cpustat. */
++	cpustat->user = cputime64_add(cpustat->user, tmp);
++	cpustat->guest = cputime64_add(cpustat->guest, tmp);
++}
++
++/*
++ * Account system cpu time to a process.
++ * @p: the process that the cpu time gets accounted to
++ * @hardirq_offset: the offset to subtract from hardirq_count()
++ * @cputime: the cpu time spent in kernel space since the last update
++ * @cputime_scaled: cputime scaled by cpu frequency
++ * This is for guest only now.
++ */
++void account_system_time(struct task_struct *p, int hardirq_offset,
++			 cputime_t cputime, cputime_t cputime_scaled)
++{
++
++	if ((p->flags & PF_VCPU) && (irq_count() - hardirq_offset == 0))
++		account_guest_time(p, cputime, cputime_scaled);
++}
++
++/*
++ * Account for involuntary wait time.
++ * @steal: the cpu time spent in involuntary wait
++ */
++void account_steal_time(cputime_t cputime)
++{
++	struct cpu_usage_stat *cpustat = &kstat_this_cpu.cpustat;
++	cputime64_t cputime64 = cputime_to_cputime64(cputime);
++
++	cpustat->steal = cputime64_add(cpustat->steal, cputime64);
++}
++
++/*
++ * Account for idle time.
++ * @cputime: the cpu time spent in idle wait
++ */
++static void account_idle_times(cputime_t cputime)
++{
++	struct cpu_usage_stat *cpustat = &kstat_this_cpu.cpustat;
++	cputime64_t cputime64 = cputime_to_cputime64(cputime);
++	struct rq *rq = this_rq();
++
++	if (atomic_read(&rq->nr_iowait) > 0)
++		cpustat->iowait = cputime64_add(cpustat->iowait, cputime64);
++	else
++		cpustat->idle = cputime64_add(cpustat->idle, cputime64);
++}
++
++#ifndef CONFIG_VIRT_CPU_ACCOUNTING
++
++void account_process_tick(struct task_struct *p, int user_tick)
++{
++}
++
++/*
++ * Account multiple ticks of steal time.
++ * @p: the process from which the cpu time has been stolen
++ * @ticks: number of stolen ticks
++ */
++void account_steal_ticks(unsigned long ticks)
++{
++	account_steal_time(jiffies_to_cputime(ticks));
++}
++
++/*
++ * Account multiple ticks of idle time.
++ * @ticks: number of stolen ticks
++ */
++void account_idle_ticks(unsigned long ticks)
++{
++	account_idle_times(jiffies_to_cputime(ticks));
++}
++#endif
++
++/*
++ * Functions to test for when SCHED_ISO tasks have used their allocated
++ * quota as real time scheduling and convert them back to SCHED_NORMAL.
++ * Where possible, the data is tested lockless, to avoid grabbing grq_lock
++ * because the occasional inaccurate result won't matter. However the
++ * data is only ever modified under lock.
++ */
++static void set_iso_refractory(void)
++{
++	grq_lock();
++	grq.iso_refractory = 1;
++	grq_unlock();
++}
++
++static void clear_iso_refractory(void)
++{
++	grq_lock();
++	grq.iso_refractory = 0;
++	grq_unlock();
++}
++
++/*
++ * Test if SCHED_ISO tasks have run longer than their alloted period as RT
++ * tasks and set the refractory flag if necessary. There is 10% hysteresis
++ * for unsetting the flag.
++ */
++static unsigned int test_ret_isorefractory(struct rq *rq)
++{
++	if (likely(!grq.iso_refractory)) {
++		if (grq.iso_ticks / ISO_PERIOD > sched_iso_cpu)
++			set_iso_refractory();
++	} else {
++		if (grq.iso_ticks / ISO_PERIOD < (sched_iso_cpu * 90 / 100))
++			clear_iso_refractory();
++	}
++	return grq.iso_refractory;
++}
++
++static void iso_tick(void)
++{
++	grq_lock();
++	grq.iso_ticks += 100;
++	grq_unlock();
++}
++
++/* No SCHED_ISO task was running so decrease rq->iso_ticks */
++static inline void no_iso_tick(void)
++{
++	if (grq.iso_ticks) {
++		grq_lock();
++		grq.iso_ticks = grq.iso_ticks * (ISO_PERIOD - 1) / ISO_PERIOD;
++		grq_unlock();
++	}
++}
++
++static int rq_running_iso(struct rq *rq)
++{
++	return rq->rq_prio == ISO_PRIO;
++}
++
++/* This manages tasks that have run out of timeslice during a scheduler_tick */
++static void task_running_tick(struct rq *rq)
++{
++	struct task_struct *p;
++
++	/*
++	 * If a SCHED_ISO task is running we increment the iso_ticks. In
++	 * order to prevent SCHED_ISO tasks from causing starvation in the
++	 * presence of true RT tasks we account those as iso_ticks as well.
++	 */
++	if ((rt_queue(rq) || (iso_queue(rq) && !grq.iso_refractory))) {
++		if (grq.iso_ticks <= (ISO_PERIOD * 100) - 100)
++			iso_tick();
++	} else
++		no_iso_tick();
++
++	if (iso_queue(rq)) {
++		if (unlikely(test_ret_isorefractory(rq))) {
++			if (rq_running_iso(rq)) {
++				/*
++				 * SCHED_ISO task is running as RT and limit
++				 * has been hit. Force it to reschedule as
++				 * SCHED_NORMAL by zeroing its time_slice
++				 */
++				rq->rq_time_slice = 0;
++			}
++		}
++	}
++
++	/* SCHED_FIFO tasks never run out of timeslice. */
++	if (rq_idle(rq) || rq->rq_time_slice > 0 || rq->rq_policy == SCHED_FIFO)
++		return;
++
++	/* p->rt.time_slice <= 0. We only modify task_struct under grq lock */
++	grq_lock();
++	p = rq->curr;
++	if (likely(task_running(p))) {
++		requeue_task(p);
++		set_tsk_need_resched(p);
++	}
++	grq_unlock();
++}
++
++void wake_up_idle_cpu(int cpu);
++
++/*
++ * This function gets called by the timer code, with HZ frequency.
++ * We call it with interrupts disabled. The data modified is all
++ * local to struct rq so we don't need to grab grq lock.
++ */
++void scheduler_tick(void)
++{
++	int cpu = smp_processor_id();
++	struct rq *rq = cpu_rq(cpu);
++
++	sched_clock_tick();
++	update_rq_clock(rq);
++	update_cpu_clock(rq, rq->curr, 1);
++	if (!rq_idle(rq))
++		task_running_tick(rq);
++	else {
++		no_iso_tick();
++		if (unlikely(queued_notrunning()))
++			set_tsk_need_resched(rq->idle);
++	}
++}
++
++notrace unsigned long get_parent_ip(unsigned long addr)
++{
++	if (in_lock_functions(addr)) {
++		addr = CALLER_ADDR2;
++		if (in_lock_functions(addr))
++			addr = CALLER_ADDR3;
++	}
++	return addr;
++}
++
++#if defined(CONFIG_PREEMPT) && (defined(CONFIG_DEBUG_PREEMPT) || \
++				defined(CONFIG_PREEMPT_TRACER))
++void __kprobes add_preempt_count(int val)
++{
++#ifdef CONFIG_DEBUG_PREEMPT
++	/*
++	 * Underflow?
++	 */
++	if (DEBUG_LOCKS_WARN_ON((preempt_count() < 0)))
++		return;
++#endif
++	preempt_count() += val;
++#ifdef CONFIG_DEBUG_PREEMPT
++	/*
++	 * Spinlock count overflowing soon?
++	 */
++	DEBUG_LOCKS_WARN_ON((preempt_count() & PREEMPT_MASK) >=
++				PREEMPT_MASK - 10);
++#endif
++	if (preempt_count() == val)
++		trace_preempt_off(CALLER_ADDR0, get_parent_ip(CALLER_ADDR1));
++}
++EXPORT_SYMBOL(add_preempt_count);
++
++void __kprobes sub_preempt_count(int val)
++{
++#ifdef CONFIG_DEBUG_PREEMPT
++	/*
++	 * Underflow?
++	 */
++	if (DEBUG_LOCKS_WARN_ON(val > preempt_count()))
++		return;
++	/*
++	 * Is the spinlock portion underflowing?
++	 */
++	if (DEBUG_LOCKS_WARN_ON((val < PREEMPT_MASK) &&
++			!(preempt_count() & PREEMPT_MASK)))
++		return;
++#endif
++
++	if (preempt_count() == val)
++		trace_preempt_on(CALLER_ADDR0, get_parent_ip(CALLER_ADDR1));
++	preempt_count() -= val;
++}
++EXPORT_SYMBOL(sub_preempt_count);
++#endif
++
++/*
++ * Deadline is "now" in jiffies + (offset by priority). Setting the deadline
++ * is the key to everything. It distributes cpu fairly amongst tasks of the
++ * same nice value, it proportions cpu according to nice level, it means the
++ * task that last woke up the longest ago has the earliest deadline, thus
++ * ensuring that interactive tasks get low latency on wake up.
++ */
++static inline int prio_deadline_diff(struct task_struct *p)
++{
++	return (pratio(p) * rr_interval * HZ / 1000 / 100) ? : 1;
++}
++
++static inline int longest_deadline(void)
++{
++	return (prio_ratios[39] * rr_interval * HZ / 1000 / 100);
++}
++
++/*
++ * SCHED_IDLE tasks still have a deadline set, but offset by to nice +19.
++ * This allows nice levels to work between IDLEPRIO tasks and gives a
++ * deadline longer than nice +19 for when they're scheduled as SCHED_NORMAL
++ * tasks.
++ */
++static inline void time_slice_expired(struct task_struct *p)
++{
++	reset_first_time_slice(p);
++	p->rt.time_slice = timeslice();
++	p->deadline = jiffies + prio_deadline_diff(p);
++	if (idleprio_task(p))
++		p->deadline += longest_deadline();
++}
++
++static inline void check_deadline(struct task_struct *p)
++{
++	if (p->rt.time_slice <= 0)
++		time_slice_expired(p);
++}
++
++/*
++ * O(n) lookup of all tasks in the global runqueue. The real brainfuck
++ * of lock contention and O(n). It's not really O(n) as only the queued,
++ * but not running tasks are scanned, and is O(n) queued in the worst case
++ * scenario only because the right task can be found before scanning all of
++ * them.
++ * Tasks are selected in this order:
++ * Real time tasks are selected purely by their static priority and in the
++ * order they were queued, so the lowest value idx, and the first queued task
++ * of that priority value is chosen.
++ * If no real time tasks are found, the SCHED_ISO priority is checked, and
++ * all SCHED_ISO tasks have the same priority value, so they're selected by
++ * the earliest deadline value.
++ * If no SCHED_ISO tasks are found, SCHED_NORMAL tasks are selected by the
++ * earliest deadline.
++ * Finally if no SCHED_NORMAL tasks are found, SCHED_IDLEPRIO tasks are
++ * selected by the earliest deadline.
++ */
++static inline struct
++task_struct *earliest_deadline_task(struct rq *rq, struct task_struct *idle)
++{
++	unsigned long dl, earliest_deadline = 0; /* Initialise to silence compiler */
++	struct task_struct *p, *edt;
++	unsigned int cpu = rq->cpu;
++	struct list_head *queue;
++	int idx = 0;
++
++	edt = idle;
++retry:
++	idx = find_next_bit(grq.prio_bitmap, PRIO_LIMIT, idx);
++	if (idx >= PRIO_LIMIT)
++		goto out;
++	queue = &grq.queue[idx];
++	list_for_each_entry(p, queue, rt.run_list) {
++		/* Make sure cpu affinity is ok */
++		if (!cpu_isset(cpu, p->cpus_allowed))
++			continue;
++		if (idx < MAX_RT_PRIO) {
++			/* We found an rt task */
++			edt = p;
++			goto out_take;
++		}
++
++		/*
++		 * No rt task, select the earliest deadline task now.
++		 * On the 1st run the 2nd condition is never used, so
++		 * there is no need to initialise earliest_deadline
++		 * before. Normalise all old deadlines to now.
++		 */
++		if (time_before(p->deadline, jiffies))
++			dl = jiffies;
++		else
++			dl = p->deadline;
++
++		if (edt == idle ||
++		    time_before(dl, earliest_deadline)) {
++			earliest_deadline = dl;
++			edt = p;
++		}
++	}
++	if (edt == idle) {
++		if (++idx < PRIO_LIMIT)
++			goto retry;
++		goto out;
++	}
++out_take:
++	take_task(rq, edt);
++out:
++	return edt;
++}
++
++#ifdef CONFIG_SMP
++static inline void set_cpuidle_map(unsigned long cpu)
++{
++	cpu_set(cpu, grq.cpu_idle_map);
++}
++
++static inline void clear_cpuidle_map(unsigned long cpu)
++{
++	cpu_clear(cpu, grq.cpu_idle_map);
++}
++
++#else /* CONFIG_SMP */
++static inline void set_cpuidle_map(unsigned long cpu)
++{
++}
++
++static inline void clear_cpuidle_map(unsigned long cpu)
++{
++}
++#endif /* !CONFIG_SMP */
++
++/*
++ * Print scheduling while atomic bug:
++ */
++static noinline void __schedule_bug(struct task_struct *prev)
++{
++	struct pt_regs *regs = get_irq_regs();
++
++	printk(KERN_ERR "BUG: scheduling while atomic: %s/%d/0x%08x\n",
++		prev->comm, prev->pid, preempt_count());
++
++	debug_show_held_locks(prev);
++	print_modules();
++	if (irqs_disabled())
++		print_irqtrace_events(prev);
++
++	if (regs)
++		show_regs(regs);
++	else
++		dump_stack();
++}
++
++/*
++ * Various schedule()-time debugging checks and statistics:
++ */
++static inline void schedule_debug(struct task_struct *prev)
++{
++	/*
++	 * Test if we are atomic. Since do_exit() needs to call into
++	 * schedule() atomically, we ignore that path for now.
++	 * Otherwise, whine if we are scheduling when we should not be.
++	 */
++	if (unlikely(in_atomic_preempt_off() && !prev->exit_state))
++		__schedule_bug(prev);
++
++	profile_hit(SCHED_PROFILING, __builtin_return_address(0));
++
++	schedstat_inc(this_rq(), sched_count);
++#ifdef CONFIG_SCHEDSTATS
++	if (unlikely(prev->lock_depth >= 0)) {
++		schedstat_inc(this_rq(), bkl_count);
++		schedstat_inc(prev, sched_info.bkl_count);
++	}
++#endif
++}
++
++/*
++ * schedule() is the main scheduler function.
++ */
++asmlinkage void __sched __schedule(void)
++{
++	struct task_struct *prev, *next, *idle;
++	int deactivate = 0, cpu;
++	long *switch_count;
++	struct rq *rq;
++	u64 now;
++
++	cpu = smp_processor_id();
++	rq = this_rq();
++	rcu_qsctr_inc(cpu);
++	prev = rq->curr;
++	switch_count = &prev->nivcsw;
++
++	release_kernel_lock(prev);
++need_resched_nonpreemptible:
++
++	schedule_debug(prev);
++	idle = rq->idle;
++	/*
++	 * The idle thread is not allowed to schedule!
++	 * Remove this check after it has been exercised a bit.
++	 */
++	if (unlikely(prev == idle) && prev->state != TASK_RUNNING) {
++		printk(KERN_ERR "bad: scheduling from the idle thread!\n");
++		dump_stack();
++	}
++
++	grq_lock_irq();
++	update_rq_clock(rq);
++	now = rq->clock;
++	update_cpu_clock(rq, prev, 0);
++
++	clear_tsk_need_resched(prev);
++
++	if (prev->state && !(preempt_count() & PREEMPT_ACTIVE)) {
++		if (unlikely(signal_pending_state(prev->state, prev)))
++			prev->state = TASK_RUNNING;
++		else
++			deactivate = 1;
++		switch_count = &prev->nvcsw;
++	}
++
++	if (prev != idle) {
++		/* Update all the information stored on struct rq */
++		prev->rt.time_slice = rq->rq_time_slice;
++		prev->deadline = rq->rq_deadline;
++		check_deadline(prev);
++		return_task(prev, deactivate);
++	}
++
++	if (likely(queued_notrunning())) {
++		next = earliest_deadline_task(rq, idle);
++	} else {
++		next = idle;
++		schedstat_inc(rq, sched_goidle);
++	}
++
++	if (next == rq->idle)
++		set_cpuidle_map(cpu);
++	else
++		clear_cpuidle_map(cpu);
++
++	prefetch(next);
++	prefetch_stack(next);
++
++	prev->timestamp = prev->last_ran = now;
++
++	if (likely(prev != next)) {
++		rq->rq_time_slice = next->rt.time_slice;
++		rq->rq_deadline = next->deadline;
++		rq->rq_prio = next->prio;
++
++		sched_info_switch(prev, next);
++		grq.nr_switches++;
++		next->oncpu = 1;
++		prev->oncpu = 0;
++		rq->curr = next;
++		++*switch_count;
++
++		context_switch(rq, prev, next); /* unlocks the rq */
++		/*
++		 * the context switch might have flipped the stack from under
++		 * us, hence refresh the local variables.
++		 */
++		cpu = smp_processor_id();
++		rq = cpu_rq(cpu);
++	} else
++		grq_unlock_irq();
++
++	if (unlikely(reacquire_kernel_lock(current) < 0))
++		goto need_resched_nonpreemptible;
++}
++
++asmlinkage void __sched schedule(void)
++{
++need_resched:
++	preempt_disable();
++	__schedule();
++	preempt_enable_no_resched();
++	if (unlikely(test_thread_flag(TIF_NEED_RESCHED)))
++		goto need_resched;
++}
++EXPORT_SYMBOL(schedule);
++
++#ifdef CONFIG_SMP
++int mutex_spin_on_owner(struct mutex *lock, struct thread_info *owner)
++{
++	return 0;
++}
++#endif
++
++#ifdef CONFIG_PREEMPT
++/*
++ * this is the entry point to schedule() from in-kernel preemption
++ * off of preempt_enable. Kernel preemptions off return from interrupt
++ * occur there and call schedule directly.
++ */
++asmlinkage void __sched preempt_schedule(void)
++{
++	struct thread_info *ti = current_thread_info();
++
++	/*
++	 * If there is a non-zero preempt_count or interrupts are disabled,
++	 * we do not want to preempt the current task. Just return..
++	 */
++	if (likely(ti->preempt_count || irqs_disabled()))
++		return;
++
++	do {
++		add_preempt_count(PREEMPT_ACTIVE);
++		schedule();
++		sub_preempt_count(PREEMPT_ACTIVE);
++
++		/*
++		 * Check again in case we missed a preemption opportunity
++		 * between schedule and now.
++		 */
++		barrier();
++	} while (need_resched());
++}
++EXPORT_SYMBOL(preempt_schedule);
++
++/*
++ * this is the entry point to schedule() from kernel preemption
++ * off of irq context.
++ * Note, that this is called and return with irqs disabled. This will
++ * protect us against recursive calling from irq.
++ */
++asmlinkage void __sched preempt_schedule_irq(void)
++{
++	struct thread_info *ti = current_thread_info();
++
++	/* Catch callers which need to be fixed */
++	BUG_ON(ti->preempt_count || !irqs_disabled());
++
++	do {
++		add_preempt_count(PREEMPT_ACTIVE);
++		local_irq_enable();
++		schedule();
++		local_irq_disable();
++		sub_preempt_count(PREEMPT_ACTIVE);
++
++		/*
++		 * Check again in case we missed a preemption opportunity
++		 * between schedule and now.
++		 */
++		barrier();
++	} while (need_resched());
++}
++
++#endif /* CONFIG_PREEMPT */
++
++int default_wake_function(wait_queue_t *curr, unsigned mode, int sync,
++			  void *key)
++{
++	return try_to_wake_up(curr->private, mode, sync);
++}
++EXPORT_SYMBOL(default_wake_function);
++
++/*
++ * The core wakeup function.  Non-exclusive wakeups (nr_exclusive == 0) just
++ * wake everything up.  If it's an exclusive wakeup (nr_exclusive == small +ve
++ * number) then we wake all the non-exclusive tasks and one exclusive task.
++ *
++ * There are circumstances in which we can try to wake a task which has already
++ * started to run but is not in state TASK_RUNNING.  try_to_wake_up() returns
++ * zero in this (rare) case, and we handle it by continuing to scan the queue.
++ */
++void __wake_up_common(wait_queue_head_t *q, unsigned int mode,
++		      int nr_exclusive, int sync, void *key)
++{
++	struct list_head *tmp, *next;
++
++	list_for_each_safe(tmp, next, &q->task_list) {
++		wait_queue_t *curr = list_entry(tmp, wait_queue_t, task_list);
++		unsigned flags = curr->flags;
++
++		if (curr->func(curr, mode, sync, key) &&
++				(flags & WQ_FLAG_EXCLUSIVE) && !--nr_exclusive)
++			break;
++	}
++}
++
++/**
++ * __wake_up - wake up threads blocked on a waitqueue.
++ * @q: the waitqueue
++ * @mode: which threads
++ * @nr_exclusive: how many wake-one or wake-many threads to wake up
++ * @key: is directly passed to the wakeup function
++ *
++ * It may be assumed that this function implies a write memory barrier before
++ * changing the task state if and only if any tasks are woken up.
++ */
++void __wake_up(wait_queue_head_t *q, unsigned int mode,
++			int nr_exclusive, void *key)
++{
++	unsigned long flags;
++
++	spin_lock_irqsave(&q->lock, flags);
++	__wake_up_common(q, mode, nr_exclusive, 0, key);
++	spin_unlock_irqrestore(&q->lock, flags);
++}
++EXPORT_SYMBOL(__wake_up);
++
++/*
++ * Same as __wake_up but called with the spinlock in wait_queue_head_t held.
++ */
++void __wake_up_locked(wait_queue_head_t *q, unsigned int mode)
++{
++	__wake_up_common(q, mode, 1, 0, NULL);
++}
++
++void __wake_up_locked_key(wait_queue_head_t *q, unsigned int mode, void *key)
++{
++	__wake_up_common(q, mode, 1, 0, key);
++}
++
++/**
++ * __wake_up_sync_key - wake up threads blocked on a waitqueue.
++ * @q: the waitqueue
++ * @mode: which threads
++ * @nr_exclusive: how many wake-one or wake-many threads to wake up
++ * @key: opaque value to be passed to wakeup targets
++ *
++ * The sync wakeup differs that the waker knows that it will schedule
++ * away soon, so while the target thread will be woken up, it will not
++ * be migrated to another CPU - ie. the two threads are 'synchronized'
++ * with each other. This can prevent needless bouncing between CPUs.
++ *
++ * On UP it can prevent extra preemption.
++ *
++ * It may be assumed that this function implies a write memory barrier before
++ * changing the task state if and only if any tasks are woken up.
++ */
++void __wake_up_sync_key(wait_queue_head_t *q, unsigned int mode,
++			int nr_exclusive, void *key)
++{
++	unsigned long flags;
++	int sync = 1;
++
++	if (unlikely(!q))
++		return;
++
++	if (unlikely(!nr_exclusive))
++		sync = 0;
++
++	spin_lock_irqsave(&q->lock, flags);
++	__wake_up_common(q, mode, nr_exclusive, sync, key);
++	spin_unlock_irqrestore(&q->lock, flags);
++}
++EXPORT_SYMBOL_GPL(__wake_up_sync_key);
++
++/**
++ * __wake_up_sync - wake up threads blocked on a waitqueue.
++ * @q: the waitqueue
++ * @mode: which threads
++ * @nr_exclusive: how many wake-one or wake-many threads to wake up
++ *
++ * The sync wakeup differs that the waker knows that it will schedule
++ * away soon, so while the target thread will be woken up, it will not
++ * be migrated to another CPU - ie. the two threads are 'synchronized'
++ * with each other. This can prevent needless bouncing between CPUs.
++ *
++ * On UP it can prevent extra preemption.
++ */
++void __wake_up_sync(wait_queue_head_t *q, unsigned int mode, int nr_exclusive)
++{
++	unsigned long flags;
++	int sync = 1;
++
++	if (unlikely(!q))
++		return;
++
++	if (unlikely(!nr_exclusive))
++		sync = 0;
++
++	spin_lock_irqsave(&q->lock, flags);
++	__wake_up_common(q, mode, nr_exclusive, sync, NULL);
++	spin_unlock_irqrestore(&q->lock, flags);
++}
++EXPORT_SYMBOL_GPL(__wake_up_sync);	/* For internal use only */
++
++/**
++ * complete: - signals a single thread waiting on this completion
++ * @x:  holds the state of this particular completion
++ *
++ * This will wake up a single thread waiting on this completion. Threads will be
++ * awakened in the same order in which they were queued.
++ *
++ * See also complete_all(), wait_for_completion() and related routines.
++ *
++ * It may be assumed that this function implies a write memory barrier before
++ * changing the task state if and only if any tasks are woken up.
++ */
++void complete(struct completion *x)
++{
++	unsigned long flags;
++
++	spin_lock_irqsave(&x->wait.lock, flags);
++	x->done++;
++	__wake_up_common(&x->wait, TASK_NORMAL, 1, 0, NULL);
++	spin_unlock_irqrestore(&x->wait.lock, flags);
++}
++EXPORT_SYMBOL(complete);
++
++/**
++ * complete_all: - signals all threads waiting on this completion
++ * @x:  holds the state of this particular completion
++ *
++ * This will wake up all threads waiting on this particular completion event.
++ *
++ * It may be assumed that this function implies a write memory barrier before
++ * changing the task state if and only if any tasks are woken up.
++ */
++void complete_all(struct completion *x)
++{
++	unsigned long flags;
++
++	spin_lock_irqsave(&x->wait.lock, flags);
++	x->done += UINT_MAX/2;
++	__wake_up_common(&x->wait, TASK_NORMAL, 0, 0, NULL);
++	spin_unlock_irqrestore(&x->wait.lock, flags);
++}
++EXPORT_SYMBOL(complete_all);
++
++static inline long __sched
++do_wait_for_common(struct completion *x, long timeout, int state)
++{
++	if (!x->done) {
++		DECLARE_WAITQUEUE(wait, current);
++
++		wait.flags |= WQ_FLAG_EXCLUSIVE;
++		__add_wait_queue_tail(&x->wait, &wait);
++		do {
++			if (signal_pending_state(state, current)) {
++				timeout = -ERESTARTSYS;
++				break;
++			}
++			__set_current_state(state);
++			spin_unlock_irq(&x->wait.lock);
++			timeout = schedule_timeout(timeout);
++			spin_lock_irq(&x->wait.lock);
++		} while (!x->done && timeout);
++		__remove_wait_queue(&x->wait, &wait);
++		if (!x->done)
++			return timeout;
++	}
++	x->done--;
++	return timeout ?: 1;
++}
++
++static long __sched
++wait_for_common(struct completion *x, long timeout, int state)
++{
++	might_sleep();
++
++	spin_lock_irq(&x->wait.lock);
++	timeout = do_wait_for_common(x, timeout, state);
++	spin_unlock_irq(&x->wait.lock);
++	return timeout;
++}
++
++/**
++ * wait_for_completion: - waits for completion of a task
++ * @x:  holds the state of this particular completion
++ *
++ * This waits to be signaled for completion of a specific task. It is NOT
++ * interruptible and there is no timeout.
++ *
++ * See also similar routines (i.e. wait_for_completion_timeout()) with timeout
++ * and interrupt capability. Also see complete().
++ */
++void __sched wait_for_completion(struct completion *x)
++{
++	wait_for_common(x, MAX_SCHEDULE_TIMEOUT, TASK_UNINTERRUPTIBLE);
++}
++EXPORT_SYMBOL(wait_for_completion);
++
++/**
++ * wait_for_completion_timeout: - waits for completion of a task (w/timeout)
++ * @x:  holds the state of this particular completion
++ * @timeout:  timeout value in jiffies
++ *
++ * This waits for either a completion of a specific task to be signaled or for a
++ * specified timeout to expire. The timeout is in jiffies. It is not
++ * interruptible.
++ */
++unsigned long __sched
++wait_for_completion_timeout(struct completion *x, unsigned long timeout)
++{
++	return wait_for_common(x, timeout, TASK_UNINTERRUPTIBLE);
++}
++EXPORT_SYMBOL(wait_for_completion_timeout);
++
++/**
++ * wait_for_completion_interruptible: - waits for completion of a task (w/intr)
++ * @x:  holds the state of this particular completion
++ *
++ * This waits for completion of a specific task to be signaled. It is
++ * interruptible.
++ */
++int __sched wait_for_completion_interruptible(struct completion *x)
++{
++	long t = wait_for_common(x, MAX_SCHEDULE_TIMEOUT, TASK_INTERRUPTIBLE);
++	if (t == -ERESTARTSYS)
++		return t;
++	return 0;
++}
++EXPORT_SYMBOL(wait_for_completion_interruptible);
++
++/**
++ * wait_for_completion_interruptible_timeout: - waits for completion (w/(to,intr))
++ * @x:  holds the state of this particular completion
++ * @timeout:  timeout value in jiffies
++ *
++ * This waits for either a completion of a specific task to be signaled or for a
++ * specified timeout to expire. It is interruptible. The timeout is in jiffies.
++ */
++unsigned long __sched
++wait_for_completion_interruptible_timeout(struct completion *x,
++					  unsigned long timeout)
++{
++	return wait_for_common(x, timeout, TASK_INTERRUPTIBLE);
++}
++EXPORT_SYMBOL(wait_for_completion_interruptible_timeout);
++
++/**
++ * wait_for_completion_killable: - waits for completion of a task (killable)
++ * @x:  holds the state of this particular completion
++ *
++ * This waits to be signaled for completion of a specific task. It can be
++ * interrupted by a kill signal.
++ */
++int __sched wait_for_completion_killable(struct completion *x)
++{
++	long t = wait_for_common(x, MAX_SCHEDULE_TIMEOUT, TASK_KILLABLE);
++	if (t == -ERESTARTSYS)
++		return t;
++	return 0;
++}
++EXPORT_SYMBOL(wait_for_completion_killable);
++
++/**
++ *	try_wait_for_completion - try to decrement a completion without blocking
++ *	@x:	completion structure
++ *
++ *	Returns: 0 if a decrement cannot be done without blocking
++ *		 1 if a decrement succeeded.
++ *
++ *	If a completion is being used as a counting completion,
++ *	attempt to decrement the counter without blocking. This
++ *	enables us to avoid waiting if the resource the completion
++ *	is protecting is not available.
++ */
++bool try_wait_for_completion(struct completion *x)
++{
++	int ret = 1;
++
++	spin_lock_irq(&x->wait.lock);
++	if (!x->done)
++		ret = 0;
++	else
++		x->done--;
++	spin_unlock_irq(&x->wait.lock);
++	return ret;
++}
++EXPORT_SYMBOL(try_wait_for_completion);
++
++/**
++ *	completion_done - Test to see if a completion has any waiters
++ *	@x:	completion structure
++ *
++ *	Returns: 0 if there are waiters (wait_for_completion() in progress)
++ *		 1 if there are no waiters.
++ *
++ */
++bool completion_done(struct completion *x)
++{
++	int ret = 1;
++
++	spin_lock_irq(&x->wait.lock);
++	if (!x->done)
++		ret = 0;
++	spin_unlock_irq(&x->wait.lock);
++	return ret;
++}
++EXPORT_SYMBOL(completion_done);
++
++static long __sched
++sleep_on_common(wait_queue_head_t *q, int state, long timeout)
++{
++	unsigned long flags;
++	wait_queue_t wait;
++
++	init_waitqueue_entry(&wait, current);
++
++	__set_current_state(state);
++
++	spin_lock_irqsave(&q->lock, flags);
++	__add_wait_queue(q, &wait);
++	spin_unlock(&q->lock);
++	timeout = schedule_timeout(timeout);
++	spin_lock_irq(&q->lock);
++	__remove_wait_queue(q, &wait);
++	spin_unlock_irqrestore(&q->lock, flags);
++
++	return timeout;
++}
++
++void __sched interruptible_sleep_on(wait_queue_head_t *q)
++{
++	sleep_on_common(q, TASK_INTERRUPTIBLE, MAX_SCHEDULE_TIMEOUT);
++}
++EXPORT_SYMBOL(interruptible_sleep_on);
++
++long __sched
++interruptible_sleep_on_timeout(wait_queue_head_t *q, long timeout)
++{
++	return sleep_on_common(q, TASK_INTERRUPTIBLE, timeout);
++}
++EXPORT_SYMBOL(interruptible_sleep_on_timeout);
++
++void __sched sleep_on(wait_queue_head_t *q)
++{
++	sleep_on_common(q, TASK_UNINTERRUPTIBLE, MAX_SCHEDULE_TIMEOUT);
++}
++EXPORT_SYMBOL(sleep_on);
++
++long __sched sleep_on_timeout(wait_queue_head_t *q, long timeout)
++{
++	return sleep_on_common(q, TASK_UNINTERRUPTIBLE, timeout);
++}
++EXPORT_SYMBOL(sleep_on_timeout);
++
++#ifdef CONFIG_RT_MUTEXES
++
++/*
++ * rt_mutex_setprio - set the current priority of a task
++ * @p: task
++ * @prio: prio value (kernel-internal form)
++ *
++ * This function changes the 'effective' priority of a task. It does
++ * not touch ->normal_prio like __setscheduler().
++ *
++ * Used by the rt_mutex code to implement priority inheritance logic.
++ */
++void rt_mutex_setprio(struct task_struct *p, int prio)
++{
++	unsigned long flags;
++	int queued, oldprio;
++	struct rq *rq;
++
++	BUG_ON(prio < 0 || prio > MAX_PRIO);
++
++	rq = time_task_grq_lock(p, &flags);
++
++	oldprio = p->prio;
++	queued = task_queued_only(p);
++	if (queued)
++		dequeue_task(p);
++	p->prio = prio;
++	if (task_running(p) && prio > oldprio)
++		resched_task(p);
++	if (queued) {
++		enqueue_task(p);
++		try_preempt(p);
++	}
++
++	task_grq_unlock(&flags);
++}
++
++#endif
++
++/*
++ * Adjust the deadline for when the priority is to change, before it's
++ * changed.
++ */
++static void adjust_deadline(struct task_struct *p, int new_prio)
++{
++	p->deadline += (prio_ratios[USER_PRIO(new_prio)] - pratio(p)) *
++			rr_interval * HZ / 1000 / 100;
++}
++
++void set_user_nice(struct task_struct *p, long nice)
++{
++	int queued, new_static;
++	unsigned long flags;
++	struct rq *rq;
++
++	if (TASK_NICE(p) == nice || nice < -20 || nice > 19)
++		return;
++	new_static = NICE_TO_PRIO(nice);
++	/*
++	 * We have to be careful, if called from sys_setpriority(),
++	 * the task might be in the middle of scheduling on another CPU.
++	 */
++	rq = time_task_grq_lock(p, &flags);
++	/*
++	 * The RT priorities are set via sched_setscheduler(), but we still
++	 * allow the 'normal' nice value to be set - but as expected
++	 * it wont have any effect on scheduling until the task is
++	 * not SCHED_NORMAL/SCHED_BATCH:
++	 */
++	if (has_rt_policy(p)) {
++		p->static_prio = new_static;
++		goto out_unlock;
++	}
++	queued = task_queued_only(p);
++	/*
++	 * If p is actually running, we don't need to do anything when
++	 * changing the priority because the grq is unaffected.
++	 */
++	if (queued)
++		dequeue_task(p);
++
++	adjust_deadline(p, new_static);
++	p->static_prio = new_static;
++	p->prio = effective_prio(p);
++
++	if (queued) {
++		enqueue_task(p);
++		try_preempt(p);
++	}
++
++	/* Just resched the task, schedule() will know what to do. */
++	if (task_running(p))
++		resched_task(p);
++out_unlock:
++	task_grq_unlock(&flags);
++}
++EXPORT_SYMBOL(set_user_nice);
++
++/*
++ * can_nice - check if a task can reduce its nice value
++ * @p: task
++ * @nice: nice value
++ */
++int can_nice(const struct task_struct *p, const int nice)
++{
++	/* convert nice value [19,-20] to rlimit style value [1,40] */
++	int nice_rlim = 20 - nice;
++
++	return (nice_rlim <= p->signal->rlim[RLIMIT_NICE].rlim_cur ||
++		capable(CAP_SYS_NICE));
++}
++
++#ifdef __ARCH_WANT_SYS_NICE
++
++/*
++ * sys_nice - change the priority of the current process.
++ * @increment: priority increment
++ *
++ * sys_setpriority is a more generic, but much slower function that
++ * does similar things.
++ */
++SYSCALL_DEFINE1(nice, int, increment)
++{
++	long nice, retval;
++
++	/*
++	 * Setpriority might change our priority at the same moment.
++	 * We don't have to worry. Conceptually one call occurs first
++	 * and we have a single winner.
++	 */
++	if (increment < -40)
++		increment = -40;
++	if (increment > 40)
++		increment = 40;
++
++	nice = TASK_NICE(current) + increment;
++	if (nice < -20)
++		nice = -20;
++	if (nice > 19)
++		nice = 19;
++
++	if (increment < 0 && !can_nice(current, nice))
++		return -EPERM;
++
++	retval = security_task_setnice(current, nice);
++	if (retval)
++		return retval;
++
++	set_user_nice(current, nice);
++	return 0;
++}
++
++#endif
++
++/**
++ * task_prio - return the priority value of a given task.
++ * @p: the task in question.
++ *
++ * This is the priority value as seen by users in /proc.
++ * RT tasks are offset by -100. Normal tasks are centered
++ * around 1, value goes from 0 (SCHED_ISO) up to 82 (nice +19
++ * SCHED_IDLE).
++ */
++int task_prio(const struct task_struct *p)
++{
++	int delta, prio = p->prio - MAX_RT_PRIO;
++
++	/* rt tasks and iso tasks */
++	if (prio <= 0)
++		goto out;
++
++	delta = (p->deadline - jiffies) * 40 / longest_deadline();
++	if (delta > 0 && delta <= 80)
++		prio += delta;
++out:
++	return prio;
++}
++
++/**
++ * task_nice - return the nice value of a given task.
++ * @p: the task in question.
++ */
++int task_nice(const struct task_struct *p)
++{
++	return TASK_NICE(p);
++}
++EXPORT_SYMBOL_GPL(task_nice);
++
++/**
++ * idle_cpu - is a given cpu idle currently?
++ * @cpu: the processor in question.
++ */
++int idle_cpu(int cpu)
++{
++	return cpu_curr(cpu) == cpu_rq(cpu)->idle;
++}
++
++/**
++ * idle_task - return the idle task for a given cpu.
++ * @cpu: the processor in question.
++ */
++struct task_struct *idle_task(int cpu)
++{
++	return cpu_rq(cpu)->idle;
++}
++
++/**
++ * find_process_by_pid - find a process with a matching PID value.
++ * @pid: the pid in question.
++ */
++static inline struct task_struct *find_process_by_pid(pid_t pid)
++{
++	return pid ? find_task_by_vpid(pid) : current;
++}
++
++/* Actually do priority change: must hold grq lock. */
++static void __setscheduler(struct task_struct *p, int policy, int prio)
++{
++	BUG_ON(task_queued_only(p));
++
++	p->policy = policy;
++	p->rt_priority = prio;
++	p->normal_prio = normal_prio(p);
++	/* we are holding p->pi_lock already */
++	p->prio = rt_mutex_getprio(p);
++	/*
++	 * Reschedule if running. schedule() will know if it can continue
++	 * running or not.
++	 */
++	if (task_running(p))
++		resched_task(p);
++}
++
++/*
++ * check the target process has a UID that matches the current process's
++ */
++static bool check_same_owner(struct task_struct *p)
++{
++	const struct cred *cred = current_cred(), *pcred;
++	bool match;
++
++	rcu_read_lock();
++	pcred = __task_cred(p);
++	match = (cred->euid == pcred->euid ||
++		 cred->euid == pcred->uid);
++	rcu_read_unlock();
++	return match;
++}
++
++static int __sched_setscheduler(struct task_struct *p, int policy,
++		       struct sched_param *param, bool user)
++{
++	struct sched_param zero_param = { .sched_priority = 0 };
++	int queued, retval, oldprio, oldpolicy = -1;
++	unsigned long flags, rlim_rtprio = 0;
++	struct rq *rq;
++
++	/* may grab non-irq protected spin_locks */
++	BUG_ON(in_interrupt());
++
++	if (is_rt_policy(policy) && !capable(CAP_SYS_NICE)) {
++		unsigned long lflags;
++
++		if (!lock_task_sighand(p, &lflags))
++			return -ESRCH;
++		rlim_rtprio = p->signal->rlim[RLIMIT_RTPRIO].rlim_cur;
++		unlock_task_sighand(p, &lflags);
++		if (rlim_rtprio)
++			goto recheck;
++		/*
++		 * If the caller requested an RT policy without having the
++		 * necessary rights, we downgrade the policy to SCHED_ISO.
++		 * We also set the parameter to zero to pass the checks.
++		 */
++		policy = SCHED_ISO;
++		param = &zero_param;
++	}
++recheck:
++	/* double check policy once rq lock held */
++	if (policy < 0)
++		policy = oldpolicy = p->policy;
++	else if (!SCHED_RANGE(policy))
++		return -EINVAL;
++	/*
++	 * Valid priorities for SCHED_FIFO and SCHED_RR are
++	 * 1..MAX_USER_RT_PRIO-1, valid priority for SCHED_NORMAL and
++	 * SCHED_BATCH is 0.
++	 */
++	if (param->sched_priority < 0 ||
++	    (p->mm && param->sched_priority > MAX_USER_RT_PRIO-1) ||
++	    (!p->mm && param->sched_priority > MAX_RT_PRIO-1))
++		return -EINVAL;
++	if (is_rt_policy(policy) != (param->sched_priority != 0))
++		return -EINVAL;
++
++	/*
++	 * Allow unprivileged RT tasks to decrease priority:
++	 */
++	if (user && !capable(CAP_SYS_NICE)) {
++		if (is_rt_policy(policy)) {
++			/* can't set/change the rt policy */
++			if (policy != p->policy && !rlim_rtprio)
++				return -EPERM;
++
++			/* can't increase priority */
++			if (param->sched_priority > p->rt_priority &&
++			    param->sched_priority > rlim_rtprio)
++				return -EPERM;
++		} else {
++			switch (p->policy) {
++				/*
++				 * Can only downgrade policies but not back to
++				 * SCHED_NORMAL
++				 */
++				case SCHED_ISO:
++					if (policy == SCHED_ISO)
++						goto out;
++					if (policy == SCHED_NORMAL)
++						return -EPERM;
++					break;
++				case SCHED_BATCH:
++					if (policy == SCHED_BATCH)
++						goto out;
++					if (policy != SCHED_IDLE)
++					    	return -EPERM;
++					break;
++				case SCHED_IDLE:
++					if (policy == SCHED_IDLE)
++						goto out;
++					return -EPERM;
++				default:
++					break;
++			}
++		}
++
++		/* can't change other user's priorities */
++		if (!check_same_owner(p))
++			return -EPERM;
++	}
++
++	retval = security_task_setscheduler(p, policy, param);
++	if (retval)
++		return retval;
++	/*
++	 * make sure no PI-waiters arrive (or leave) while we are
++	 * changing the priority of the task:
++	 */
++	spin_lock_irqsave(&p->pi_lock, flags);
++	/*
++	 * To be able to change p->policy safely, the apropriate
++	 * runqueue lock must be held.
++	 */
++	rq = __task_grq_lock(p);
++	/* recheck policy now with rq lock held */
++	if (unlikely(oldpolicy != -1 && oldpolicy != p->policy)) {
++		__task_grq_unlock();
++		spin_unlock_irqrestore(&p->pi_lock, flags);
++		policy = oldpolicy = -1;
++		goto recheck;
++	}
++	update_rq_clock(rq);
++	queued = task_queued_only(p);
++	if (queued)
++		dequeue_task(p);
++	oldprio = p->prio;
++	__setscheduler(p, policy, param->sched_priority);
++	if (queued) {
++		enqueue_task(p);
++		try_preempt(p);
++	}
++	__task_grq_unlock();
++	spin_unlock_irqrestore(&p->pi_lock, flags);
++
++	rt_mutex_adjust_pi(p);
++out:
++	return 0;
++}
++
++/**
++ * sched_setscheduler - change the scheduling policy and/or RT priority of a thread.
++ * @p: the task in question.
++ * @policy: new policy.
++ * @param: structure containing the new RT priority.
++ *
++ * NOTE that the task may be already dead.
++ */
++int sched_setscheduler(struct task_struct *p, int policy,
++		       struct sched_param *param)
++{
++	return __sched_setscheduler(p, policy, param, true);
++}
++
++EXPORT_SYMBOL_GPL(sched_setscheduler);
++
++/**
++ * sched_setscheduler_nocheck - change the scheduling policy and/or RT priority of a thread from kernelspace.
++ * @p: the task in question.
++ * @policy: new policy.
++ * @param: structure containing the new RT priority.
++ *
++ * Just like sched_setscheduler, only don't bother checking if the
++ * current context has permission.  For example, this is needed in
++ * stop_machine(): we create temporary high priority worker threads,
++ * but our caller might not have that capability.
++ */
++int sched_setscheduler_nocheck(struct task_struct *p, int policy,
++			       struct sched_param *param)
++{
++	return __sched_setscheduler(p, policy, param, false);
++}
++
++static int
++do_sched_setscheduler(pid_t pid, int policy, struct sched_param __user *param)
++{
++	struct sched_param lparam;
++	struct task_struct *p;
++	int retval;
++
++	if (!param || pid < 0)
++		return -EINVAL;
++	if (copy_from_user(&lparam, param, sizeof(struct sched_param)))
++		return -EFAULT;
++
++	rcu_read_lock();
++	retval = -ESRCH;
++	p = find_process_by_pid(pid);
++	if (p != NULL)
++		retval = sched_setscheduler(p, policy, &lparam);
++	rcu_read_unlock();
++
++	return retval;
++}
++
++/**
++ * sys_sched_setscheduler - set/change the scheduler policy and RT priority
++ * @pid: the pid in question.
++ * @policy: new policy.
++ * @param: structure containing the new RT priority.
++ */
++asmlinkage long sys_sched_setscheduler(pid_t pid, int policy,
++				       struct sched_param __user *param)
++{
++	/* negative values for policy are not valid */
++	if (policy < 0)
++		return -EINVAL;
++
++	return do_sched_setscheduler(pid, policy, param);
++}
++
++/**
++ * sys_sched_setparam - set/change the RT priority of a thread
++ * @pid: the pid in question.
++ * @param: structure containing the new RT priority.
++ */
++SYSCALL_DEFINE2(sched_setparam, pid_t, pid, struct sched_param __user *, param)
++{
++	return do_sched_setscheduler(pid, -1, param);
++}
++
++/**
++ * sys_sched_getscheduler - get the policy (scheduling class) of a thread
++ * @pid: the pid in question.
++ */
++SYSCALL_DEFINE1(sched_getscheduler, pid_t, pid)
++{
++	struct task_struct *p;
++	int retval = -EINVAL;
++
++	if (pid < 0)
++		goto out_nounlock;
++
++	retval = -ESRCH;
++	read_lock(&tasklist_lock);
++	p = find_process_by_pid(pid);
++	if (p) {
++		retval = security_task_getscheduler(p);
++		if (!retval)
++			retval = p->policy;
++	}
++	read_unlock(&tasklist_lock);
++
++out_nounlock:
++	return retval;
++}
++
++/**
++ * sys_sched_getscheduler - get the RT priority of a thread
++ * @pid: the pid in question.
++ * @param: structure containing the RT priority.
++ */
++SYSCALL_DEFINE2(sched_getparam, pid_t, pid, struct sched_param __user *, param)
++{
++	struct sched_param lp;
++	struct task_struct *p;
++	int retval = -EINVAL;
++
++	if (!param || pid < 0)
++		goto out_nounlock;
++
++	read_lock(&tasklist_lock);
++	p = find_process_by_pid(pid);
++	retval = -ESRCH;
++	if (!p)
++		goto out_unlock;
++
++	retval = security_task_getscheduler(p);
++	if (retval)
++		goto out_unlock;
++
++	lp.sched_priority = p->rt_priority;
++	read_unlock(&tasklist_lock);
++
++	/*
++	 * This one might sleep, we cannot do it with a spinlock held ...
++	 */
++	retval = copy_to_user(param, &lp, sizeof(*param)) ? -EFAULT : 0;
++
++out_nounlock:
++	return retval;
++
++out_unlock:
++	read_unlock(&tasklist_lock);
++	return retval;
++}
++
++long sched_setaffinity(pid_t pid, const struct cpumask *in_mask)
++{
++	cpumask_var_t cpus_allowed, new_mask;
++	struct task_struct *p;
++	int retval;
++
++	get_online_cpus();
++	read_lock(&tasklist_lock);
++
++	p = find_process_by_pid(pid);
++	if (!p) {
++		read_unlock(&tasklist_lock);
++		put_online_cpus();
++		return -ESRCH;
++	}
++
++	/*
++	 * It is not safe to call set_cpus_allowed with the
++	 * tasklist_lock held. We will bump the task_struct's
++	 * usage count and then drop tasklist_lock.
++	 */
++	get_task_struct(p);
++	read_unlock(&tasklist_lock);
++
++	if (!alloc_cpumask_var(&cpus_allowed, GFP_KERNEL)) {
++		retval = -ENOMEM;
++		goto out_put_task;
++	}
++	if (!alloc_cpumask_var(&new_mask, GFP_KERNEL)) {
++		retval = -ENOMEM;
++		goto out_free_cpus_allowed;
++	}
++	retval = -EPERM;
++	if (!check_same_owner(p) && !capable(CAP_SYS_NICE))
++		goto out_unlock;
++
++	retval = security_task_setscheduler(p, 0, NULL);
++	if (retval)
++		goto out_unlock;
++
++	cpuset_cpus_allowed(p, cpus_allowed);
++	cpumask_and(new_mask, in_mask, cpus_allowed);
++again:
++	retval = set_cpus_allowed_ptr(p, new_mask);
++
++	if (!retval) {
++		cpuset_cpus_allowed(p, cpus_allowed);
++		if (!cpumask_subset(new_mask, cpus_allowed)) {
++			/*
++			 * We must have raced with a concurrent cpuset
++			 * update. Just reset the cpus_allowed to the
++			 * cpuset's cpus_allowed
++			 */
++			cpumask_copy(new_mask, cpus_allowed);
++			goto again;
++		}
++	}
++out_unlock:
++	free_cpumask_var(new_mask);
++out_free_cpus_allowed:
++	free_cpumask_var(cpus_allowed);
++out_put_task:
++	put_task_struct(p);
++	put_online_cpus();
++	return retval;
++}
++
++static int get_user_cpu_mask(unsigned long __user *user_mask_ptr, unsigned len,
++			     cpumask_t *new_mask)
++{
++	if (len < sizeof(cpumask_t)) {
++		memset(new_mask, 0, sizeof(cpumask_t));
++	} else if (len > sizeof(cpumask_t)) {
++		len = sizeof(cpumask_t);
++	}
++	return copy_from_user(new_mask, user_mask_ptr, len) ? -EFAULT : 0;
++}
++
++
++/**
++ * sys_sched_setaffinity - set the cpu affinity of a process
++ * @pid: pid of the process
++ * @len: length in bytes of the bitmask pointed to by user_mask_ptr
++ * @user_mask_ptr: user-space pointer to the new cpu mask
++ */
++SYSCALL_DEFINE3(sched_setaffinity, pid_t, pid, unsigned int, len,
++		unsigned long __user *, user_mask_ptr)
++{
++	cpumask_var_t new_mask;
++	int retval;
++
++	if (!alloc_cpumask_var(&new_mask, GFP_KERNEL))
++		return -ENOMEM;
++
++	retval = get_user_cpu_mask(user_mask_ptr, len, new_mask);
++	if (retval == 0)
++		retval = sched_setaffinity(pid, new_mask);
++	free_cpumask_var(new_mask);
++	return retval;
++}
++
++long sched_getaffinity(pid_t pid, cpumask_t *mask)
++{
++	struct task_struct *p;
++	int retval;
++
++	mutex_lock(&sched_hotcpu_mutex);
++	read_lock(&tasklist_lock);
++
++	retval = -ESRCH;
++	p = find_process_by_pid(pid);
++	if (!p)
++		goto out_unlock;
++
++	retval = security_task_getscheduler(p);
++	if (retval)
++		goto out_unlock;
++
++	cpus_and(*mask, p->cpus_allowed, cpu_online_map);
++
++out_unlock:
++	read_unlock(&tasklist_lock);
++	mutex_unlock(&sched_hotcpu_mutex);
++	if (retval)
++		return retval;
++
++	return 0;
++}
++
++/**
++ * sys_sched_getaffinity - get the cpu affinity of a process
++ * @pid: pid of the process
++ * @len: length in bytes of the bitmask pointed to by user_mask_ptr
++ * @user_mask_ptr: user-space pointer to hold the current cpu mask
++ */
++SYSCALL_DEFINE3(sched_getaffinity, pid_t, pid, unsigned int, len,
++		unsigned long __user *, user_mask_ptr)
++{
++	int ret;
++	cpumask_var_t mask;
++
++	if (len < cpumask_size())
++		return -EINVAL;
++
++	if (!alloc_cpumask_var(&mask, GFP_KERNEL))
++		return -ENOMEM;
++
++	ret = sched_getaffinity(pid, mask);
++	if (ret == 0) {
++		if (copy_to_user(user_mask_ptr, mask, cpumask_size()))
++			ret = -EFAULT;
++		else
++			ret = cpumask_size();
++	}
++	free_cpumask_var(mask);
++
++	return ret;
++}
++
++/**
++ * sys_sched_yield - yield the current processor to other threads.
++ *
++ * This function yields the current CPU to other tasks. It does this by
++ * refilling the timeslice, resetting the deadline and scheduling away.
++ */
++SYSCALL_DEFINE0(sched_yield)
++{
++	struct task_struct *p;
++
++	grq_lock_irq();
++	p = current;
++	schedstat_inc(this_rq(), yld_count);
++	update_rq_clock(task_rq(p));
++	time_slice_expired(p);
++	requeue_task(p);
++
++	/*
++	 * Since we are going to call schedule() anyway, there's
++	 * no need to preempt or enable interrupts:
++	 */
++	__release(grq.lock);
++	spin_release(&grq.lock.dep_map, 1, _THIS_IP_);
++	_raw_spin_unlock(&grq.lock);
++	preempt_enable_no_resched();
++
++	schedule();
++
++	return 0;
++}
++
++static inline int should_resched(void)
++{
++	return need_resched() && !(preempt_count() & PREEMPT_ACTIVE);
++}
++
++static void __cond_resched(void)
++{
++#ifdef CONFIG_DEBUG_SPINLOCK_SLEEP
++	__might_sleep(__FILE__, __LINE__);
++#endif
++	/*
++	 * The BKS might be reacquired before we have dropped
++	 * PREEMPT_ACTIVE, which could trigger a second
++	 * cond_resched() call.
++	 */
++	do {
++		add_preempt_count(PREEMPT_ACTIVE);
++		schedule();
++		sub_preempt_count(PREEMPT_ACTIVE);
++	} while (need_resched());
++}
++
++int __sched _cond_resched(void)
++{
++	if (should_resched()) {
++		__cond_resched();
++		return 1;
++	}
++	return 0;
++}
++EXPORT_SYMBOL(_cond_resched);
++
++/*
++ * cond_resched_lock() - if a reschedule is pending, drop the given lock,
++ * call schedule, and on return reacquire the lock.
++ *
++ * This works OK both with and without CONFIG_PREEMPT.  We do strange low-level
++ * operations here to prevent schedule() from being called twice (once via
++ * spin_unlock(), once by hand).
++ */
++int cond_resched_lock(spinlock_t *lock)
++{
++	int resched = should_resched();
++	int ret = 0;
++
++	if (spin_needbreak(lock) || resched) {
++		spin_unlock(lock);
++		if (resched)
++			__cond_resched();
++		else
++			cpu_relax();
++		ret = 1;
++		spin_lock(lock);
++	}
++	return ret;
++}
++EXPORT_SYMBOL(cond_resched_lock);
++
++int __sched cond_resched_softirq(void)
++{
++	BUG_ON(!in_softirq());
++
++	if (should_resched()) {
++		local_bh_enable();
++		__cond_resched();
++		local_bh_disable();
++		return 1;
++	}
++	return 0;
++}
++EXPORT_SYMBOL(cond_resched_softirq);
++
++/**
++ * yield - yield the current processor to other threads.
++ *
++ * This is a shortcut for kernel-space yielding - it marks the
++ * thread runnable and calls sys_sched_yield().
++ */
++void __sched yield(void)
++{
++	set_current_state(TASK_RUNNING);
++	sys_sched_yield();
++}
++EXPORT_SYMBOL(yield);
++
++/*
++ * This task is about to go to sleep on IO.  Increment rq->nr_iowait so
++ * that process accounting knows that this is a task in IO wait state.
++ *
++ * But don't do that if it is a deliberate, throttling IO wait (this task
++ * has set its backing_dev_info: the queue against which it should throttle)
++ */
++void __sched io_schedule(void)
++{
++	struct rq *rq = &__raw_get_cpu_var(runqueues);
++
++	delayacct_blkio_start();
++	atomic_inc(&rq->nr_iowait);
++	schedule();
++	atomic_dec(&rq->nr_iowait);
++	delayacct_blkio_end();
++}
++EXPORT_SYMBOL(io_schedule);
++
++long __sched io_schedule_timeout(long timeout)
++{
++	struct rq *rq = &__raw_get_cpu_var(runqueues);
++	long ret;
++
++	delayacct_blkio_start();
++	atomic_inc(&rq->nr_iowait);
++	ret = schedule_timeout(timeout);
++	atomic_dec(&rq->nr_iowait);
++	delayacct_blkio_end();
++	return ret;
++}
++
++/**
++ * sys_sched_get_priority_max - return maximum RT priority.
++ * @policy: scheduling class.
++ *
++ * this syscall returns the maximum rt_priority that can be used
++ * by a given scheduling class.
++ */
++SYSCALL_DEFINE1(sched_get_priority_max, int, policy)
++{
++	int ret = -EINVAL;
++
++	switch (policy) {
++	case SCHED_FIFO:
++	case SCHED_RR:
++		ret = MAX_USER_RT_PRIO-1;
++		break;
++	case SCHED_NORMAL:
++	case SCHED_BATCH:
++	case SCHED_ISO:
++	case SCHED_IDLE:
++		ret = 0;
++		break;
++	}
++	return ret;
++}
++
++/**
++ * sys_sched_get_priority_min - return minimum RT priority.
++ * @policy: scheduling class.
++ *
++ * this syscall returns the minimum rt_priority that can be used
++ * by a given scheduling class.
++ */
++SYSCALL_DEFINE1(sched_get_priority_min, int, policy)
++{
++	int ret = -EINVAL;
++
++	switch (policy) {
++	case SCHED_FIFO:
++	case SCHED_RR:
++		ret = 1;
++		break;
++	case SCHED_NORMAL:
++	case SCHED_BATCH:
++	case SCHED_ISO:
++	case SCHED_IDLE:
++		ret = 0;
++		break;
++	}
++	return ret;
++}
++
++/**
++ * sys_sched_rr_get_interval - return the default timeslice of a process.
++ * @pid: pid of the process.
++ * @interval: userspace pointer to the timeslice value.
++ *
++ * this syscall writes the default timeslice value of a given process
++ * into the user-space timespec buffer. A value of '0' means infinity.
++ */
++SYSCALL_DEFINE2(sched_rr_get_interval, pid_t, pid,
++		struct timespec __user *, interval)
++{
++	struct task_struct *p;
++	int retval = -EINVAL;
++	struct timespec t;
++
++	if (pid < 0)
++		goto out_nounlock;
++
++	retval = -ESRCH;
++	read_lock(&tasklist_lock);
++	p = find_process_by_pid(pid);
++	if (!p)
++		goto out_unlock;
++
++	retval = security_task_getscheduler(p);
++	if (retval)
++		goto out_unlock;
++
++	t = ns_to_timespec(p->policy == SCHED_FIFO ? 0 :
++			   MS_TO_NS(task_timeslice(p)));
++	read_unlock(&tasklist_lock);
++	retval = copy_to_user(interval, &t, sizeof(t)) ? -EFAULT : 0;
++out_nounlock:
++	return retval;
++out_unlock:
++	read_unlock(&tasklist_lock);
++	return retval;
++}
++
++static const char stat_nam[] = TASK_STATE_TO_CHAR_STR;
++
++void sched_show_task(struct task_struct *p)
++{
++	unsigned long free = 0;
++	unsigned state;
++
++	state = p->state ? __ffs(p->state) + 1 : 0;
++	printk(KERN_INFO "%-13.13s %c", p->comm,
++		state < sizeof(stat_nam) - 1 ? stat_nam[state] : '?');
++#if BITS_PER_LONG == 32
++	if (state == TASK_RUNNING)
++		printk(KERN_CONT " running  ");
++	else
++		printk(KERN_CONT " %08lx ", thread_saved_pc(p));
++#else
++	if (state == TASK_RUNNING)
++		printk(KERN_CONT "  running task    ");
++	else
++		printk(KERN_CONT " %016lx ", thread_saved_pc(p));
++#endif
++#ifdef CONFIG_DEBUG_STACK_USAGE
++	free = stack_not_used(p);
++#endif
++	printk(KERN_CONT "%5lu %5d %6d 0x%08lx\n", free,
++		task_pid_nr(p), task_pid_nr(p->real_parent),
++		(unsigned long)task_thread_info(p)->flags);
++
++	show_stack(p, NULL);
++}
++
++void show_state_filter(unsigned long state_filter)
++{
++	struct task_struct *g, *p;
++
++#if BITS_PER_LONG == 32
++	printk(KERN_INFO
++		"  task                PC stack   pid father\n");
++#else
++	printk(KERN_INFO
++		"  task                        PC stack   pid father\n");
++#endif
++	read_lock(&tasklist_lock);
++	do_each_thread(g, p) {
++		/*
++		 * reset the NMI-timeout, listing all files on a slow
++		 * console might take alot of time:
++		 */
++		touch_nmi_watchdog();
++		if (!state_filter || (p->state & state_filter))
++			sched_show_task(p);
++	} while_each_thread(g, p);
++
++	touch_all_softlockup_watchdogs();
++
++	read_unlock(&tasklist_lock);
++	/*
++	 * Only show locks if all tasks are dumped:
++	 */
++	if (state_filter == -1)
++		debug_show_all_locks();
++}
++
++/**
++ * init_idle - set up an idle thread for a given CPU
++ * @idle: task in question
++ * @cpu: cpu the idle task belongs to
++ *
++ * NOTE: this function does not set the idle thread's NEED_RESCHED
++ * flag, to make booting more robust.
++ */
++void __cpuinit init_idle(struct task_struct *idle, int cpu)
++{
++	struct rq *rq = cpu_rq(cpu);
++	unsigned long flags;
++
++	time_grq_lock(rq, &flags);
++	idle->timestamp = idle->last_ran = rq->clock;
++	idle->state = TASK_RUNNING;
++	/* Setting prio to illegal value shouldn't matter when never queued */
++	idle->prio = rq->rq_prio = PRIO_LIMIT;
++	rq->rq_deadline = idle->deadline;
++	rq->rq_policy = idle->policy;
++	rq->rq_time_slice = idle->rt.time_slice;
++	idle->cpus_allowed = cpumask_of_cpu(cpu);
++	set_task_cpu(idle, cpu);
++	rq->curr = rq->idle = idle;
++	idle->oncpu = 1;
++	set_cpuidle_map(cpu);
++#ifdef CONFIG_HOTPLUG_CPU
++	idle->unplugged_mask = CPU_MASK_NONE;
++#endif
++	grq_unlock_irqrestore(&flags);
++
++	/* Set the preempt count _outside_ the spinlocks! */
++#if defined(CONFIG_PREEMPT) && !defined(CONFIG_PREEMPT_BKL)
++	task_thread_info(idle)->preempt_count = (idle->lock_depth >= 0);
++#else
++	task_thread_info(idle)->preempt_count = 0;
++#endif
++	ftrace_graph_init_task(idle);
++}
++
++/*
++ * In a system that switches off the HZ timer nohz_cpu_mask
++ * indicates which cpus entered this state. This is used
++ * in the rcu update to wait only for active cpus. For system
++ * which do not switch off the HZ timer nohz_cpu_mask should
++ * always be CPU_BITS_NONE.
++ */
++cpumask_var_t nohz_cpu_mask;
++
++#ifdef CONFIG_SMP
++#ifdef CONFIG_NO_HZ
++static struct {
++	atomic_t load_balancer;
++	cpumask_var_t cpu_mask;
++	cpumask_var_t ilb_grp_nohz_mask;
++} nohz ____cacheline_aligned = {
++	.load_balancer = ATOMIC_INIT(-1),
++};
++
++int get_nohz_load_balancer(void)
++{
++	return atomic_read(&nohz.load_balancer);
++}
++
++/*
++ * This routine will try to nominate the ilb (idle load balancing)
++ * owner among the cpus whose ticks are stopped. ilb owner will do the idle
++ * load balancing on behalf of all those cpus. If all the cpus in the system
++ * go into this tickless mode, then there will be no ilb owner (as there is
++ * no need for one) and all the cpus will sleep till the next wakeup event
++ * arrives...
++ *
++ * For the ilb owner, tick is not stopped. And this tick will be used
++ * for idle load balancing. ilb owner will still be part of
++ * nohz.cpu_mask..
++ *
++ * While stopping the tick, this cpu will become the ilb owner if there
++ * is no other owner. And will be the owner till that cpu becomes busy
++ * or if all cpus in the system stop their ticks at which point
++ * there is no need for ilb owner.
++ *
++ * When the ilb owner becomes busy, it nominates another owner, during the
++ * next busy scheduler_tick()
++ */
++int select_nohz_load_balancer(int stop_tick)
++{
++	int cpu = smp_processor_id();
++
++	if (stop_tick) {
++		cpu_rq(cpu)->in_nohz_recently = 1;
++
++		if (!cpu_active(cpu)) {
++			if (atomic_read(&nohz.load_balancer) != cpu)
++				return 0;
++
++			/*
++			 * If we are going offline and still the leader,
++			 * give up!
++			 */
++			if (atomic_cmpxchg(&nohz.load_balancer, cpu, -1) != cpu)
++				BUG();
++
++			return 0;
++		}
++
++		cpumask_set_cpu(cpu, nohz.cpu_mask);
++
++		/* time for ilb owner also to sleep */
++		if (cpumask_weight(nohz.cpu_mask) == num_online_cpus()) {
++			if (atomic_read(&nohz.load_balancer) == cpu)
++				atomic_set(&nohz.load_balancer, -1);
++			return 0;
++		}
++
++		if (atomic_read(&nohz.load_balancer) == -1) {
++			/* make me the ilb owner */
++			if (atomic_cmpxchg(&nohz.load_balancer, -1, cpu) == -1)
++				return 1;
++		} else if (atomic_read(&nohz.load_balancer) == cpu)
++			return 1;
++	} else {
++		if (!cpumask_test_cpu(cpu, nohz.cpu_mask))
++			return 0;
++
++		cpumask_clear_cpu(cpu, nohz.cpu_mask);
++
++		if (atomic_read(&nohz.load_balancer) == cpu)
++			if (atomic_cmpxchg(&nohz.load_balancer, cpu, -1) != cpu)
++				BUG();
++	}
++	return 0;
++}
++
++/*
++ * When add_timer_on() enqueues a timer into the timer wheel of an
++ * idle CPU then this timer might expire before the next timer event
++ * which is scheduled to wake up that CPU. In case of a completely
++ * idle system the next event might even be infinite time into the
++ * future. wake_up_idle_cpu() ensures that the CPU is woken up and
++ * leaves the inner idle loop so the newly added timer is taken into
++ * account when the CPU goes back to idle and evaluates the timer
++ * wheel for the next timer event.
++ */
++void wake_up_idle_cpu(int cpu)
++{
++	struct task_struct *idle;
++	struct rq *rq;
++
++	if (cpu == smp_processor_id())
++		return;
++
++	rq = cpu_rq(cpu);
++	idle = rq->idle;
++
++	/*
++	 * This is safe, as this function is called with the timer
++	 * wheel base lock of (cpu) held. When the CPU is on the way
++	 * to idle and has not yet set rq->curr to idle then it will
++	 * be serialized on the timer wheel base lock and take the new
++	 * timer into account automatically.
++	 */
++	if (unlikely(rq->curr != idle))
++		return;
++
++	/*
++	 * We can set TIF_RESCHED on the idle task of the other CPU
++	 * lockless. The worst case is that the other CPU runs the
++	 * idle task through an additional NOOP schedule()
++	 */
++	set_tsk_need_resched(idle);
++
++	/* NEED_RESCHED must be visible before we test polling */
++	smp_mb();
++	if (!tsk_is_polling(idle))
++		smp_send_reschedule(cpu);
++}
++
++#endif /* CONFIG_NO_HZ */
++
++/*
++ * Change a given task's CPU affinity. Migrate the thread to a
++ * proper CPU and schedule it away if the CPU it's executing on
++ * is removed from the allowed bitmask.
++ *
++ * NOTE: the caller must have a valid reference to the task, the
++ * task must not exit() & deallocate itself prematurely. The
++ * call is not atomic; no spinlocks may be held.
++ */
++int set_cpus_allowed_ptr(struct task_struct *p, const struct cpumask *new_mask)
++{
++	unsigned long flags;
++	int running = 0;
++	int queued = 0;
++	struct rq *rq;
++	int ret = 0;
++
++	rq = task_grq_lock(p, &flags);
++	if (!cpumask_intersects(new_mask, cpu_online_mask)) {
++		ret = -EINVAL;
++		goto out;
++	}
++
++	if (unlikely((p->flags & PF_THREAD_BOUND) && p != current &&
++		     !cpumask_equal(&p->cpus_allowed, new_mask))) {
++		ret = -EINVAL;
++		goto out;
++	}
++
++	queued = task_queued_only(p);
++
++	cpumask_copy(&p->cpus_allowed, new_mask);
++	p->rt.nr_cpus_allowed = cpumask_weight(new_mask);
++
++	/* Can the task run on the task's current CPU? If so, we're done */
++	if (cpumask_test_cpu(task_cpu(p), new_mask))
++		goto out;
++
++	/* Reschedule the task, schedule() will know if it can keep running */
++	if (task_running(p))
++		running = 1;
++	else
++		set_task_cpu(p, cpumask_any_and(cpu_online_mask, new_mask));
++
++out:
++	if (queued)
++		try_preempt(p);
++	task_grq_unlock(&flags);
++
++	/* This might be a flaky way of changing cpus! */
++	if (running)
++		schedule();
++	return ret;
++}
++EXPORT_SYMBOL_GPL(set_cpus_allowed_ptr);
++
++#ifdef CONFIG_HOTPLUG_CPU
++/* Schedules idle task to be the next runnable task on current CPU.
++ * It does so by boosting its priority to highest possible.
++ * Used by CPU offline code.
++ */
++void sched_idle_next(void)
++{
++	int this_cpu = smp_processor_id();
++	struct rq *rq = cpu_rq(this_cpu);
++	struct task_struct *idle = rq->idle;
++	unsigned long flags;
++
++	/* cpu has to be offline */
++	BUG_ON(cpu_online(this_cpu));
++
++	/*
++	 * Strictly not necessary since rest of the CPUs are stopped by now
++	 * and interrupts disabled on the current cpu.
++	 */
++	time_grq_lock(rq, &flags);
++
++	__setscheduler(idle, SCHED_FIFO, MAX_RT_PRIO - 1);
++
++	activate_idle_task(idle);
++	set_tsk_need_resched(rq->curr);
++
++	grq_unlock_irqrestore(&flags);
++}
++
++/*
++ * Ensures that the idle task is using init_mm right before its cpu goes
++ * offline.
++ */
++void idle_task_exit(void)
++{
++	struct mm_struct *mm = current->active_mm;
++
++	BUG_ON(cpu_online(smp_processor_id()));
++
++	if (mm != &init_mm)
++		switch_mm(mm, &init_mm, current);
++	mmdrop(mm);
++}
++
++#endif /* CONFIG_HOTPLUG_CPU */
++
++#if defined(CONFIG_SCHED_DEBUG) && defined(CONFIG_SYSCTL)
++
++static struct ctl_table sd_ctl_dir[] = {
++	{
++		.procname	= "sched_domain",
++		.mode		= 0555,
++	},
++	{0, },
++};
++
++static struct ctl_table sd_ctl_root[] = {
++	{
++		.ctl_name	= CTL_KERN,
++		.procname	= "kernel",
++		.mode		= 0555,
++		.child		= sd_ctl_dir,
++	},
++	{0, },
++};
++
++static struct ctl_table *sd_alloc_ctl_entry(int n)
++{
++	struct ctl_table *entry =
++		kcalloc(n, sizeof(struct ctl_table), GFP_KERNEL);
++
++	return entry;
++}
++
++static void sd_free_ctl_entry(struct ctl_table **tablep)
++{
++	struct ctl_table *entry;
++
++	/*
++	 * In the intermediate directories, both the child directory and
++	 * procname are dynamically allocated and could fail but the mode
++	 * will always be set. In the lowest directory the names are
++	 * static strings and all have proc handlers.
++	 */
++	for (entry = *tablep; entry->mode; entry++) {
++		if (entry->child)
++			sd_free_ctl_entry(&entry->child);
++		if (entry->proc_handler == NULL)
++			kfree(entry->procname);
++	}
++
++	kfree(*tablep);
++	*tablep = NULL;
++}
++
++static void
++set_table_entry(struct ctl_table *entry,
++		const char *procname, void *data, int maxlen,
++		mode_t mode, proc_handler *proc_handler)
++{
++	entry->procname = procname;
++	entry->data = data;
++	entry->maxlen = maxlen;
++	entry->mode = mode;
++	entry->proc_handler = proc_handler;
++}
++
++static struct ctl_table *
++sd_alloc_ctl_domain_table(struct sched_domain *sd)
++{
++	struct ctl_table *table = sd_alloc_ctl_entry(13);
++
++	if (table == NULL)
++		return NULL;
++
++	set_table_entry(&table[0], "min_interval", &sd->min_interval,
++		sizeof(long), 0644, proc_doulongvec_minmax);
++	set_table_entry(&table[1], "max_interval", &sd->max_interval,
++		sizeof(long), 0644, proc_doulongvec_minmax);
++	set_table_entry(&table[2], "busy_idx", &sd->busy_idx,
++		sizeof(int), 0644, proc_dointvec_minmax);
++	set_table_entry(&table[3], "idle_idx", &sd->idle_idx,
++		sizeof(int), 0644, proc_dointvec_minmax);
++	set_table_entry(&table[4], "newidle_idx", &sd->newidle_idx,
++		sizeof(int), 0644, proc_dointvec_minmax);
++	set_table_entry(&table[5], "wake_idx", &sd->wake_idx,
++		sizeof(int), 0644, proc_dointvec_minmax);
++	set_table_entry(&table[6], "forkexec_idx", &sd->forkexec_idx,
++		sizeof(int), 0644, proc_dointvec_minmax);
++	set_table_entry(&table[7], "busy_factor", &sd->busy_factor,
++		sizeof(int), 0644, proc_dointvec_minmax);
++	set_table_entry(&table[8], "imbalance_pct", &sd->imbalance_pct,
++		sizeof(int), 0644, proc_dointvec_minmax);
++	set_table_entry(&table[9], "cache_nice_tries",
++		&sd->cache_nice_tries,
++		sizeof(int), 0644, proc_dointvec_minmax);
++	set_table_entry(&table[10], "flags", &sd->flags,
++		sizeof(int), 0644, proc_dointvec_minmax);
++	set_table_entry(&table[11], "name", sd->name,
++		CORENAME_MAX_SIZE, 0444, proc_dostring);
++	/* &table[12] is terminator */
++
++	return table;
++}
++
++static ctl_table *sd_alloc_ctl_cpu_table(int cpu)
++{
++	struct ctl_table *entry, *table;
++	struct sched_domain *sd;
++	int domain_num = 0, i;
++	char buf[32];
++
++	for_each_domain(cpu, sd)
++		domain_num++;
++	entry = table = sd_alloc_ctl_entry(domain_num + 1);
++	if (table == NULL)
++		return NULL;
++
++	i = 0;
++	for_each_domain(cpu, sd) {
++		snprintf(buf, 32, "domain%d", i);
++		entry->procname = kstrdup(buf, GFP_KERNEL);
++		entry->mode = 0555;
++		entry->child = sd_alloc_ctl_domain_table(sd);
++		entry++;
++		i++;
++	}
++	return table;
++}
++
++static struct ctl_table_header *sd_sysctl_header;
++static void register_sched_domain_sysctl(void)
++{
++	int i, cpu_num = num_online_cpus();
++	struct ctl_table *entry = sd_alloc_ctl_entry(cpu_num + 1);
++	char buf[32];
++
++	WARN_ON(sd_ctl_dir[0].child);
++	sd_ctl_dir[0].child = entry;
++
++	if (entry == NULL)
++		return;
++
++	for_each_online_cpu(i) {
++		snprintf(buf, 32, "cpu%d", i);
++		entry->procname = kstrdup(buf, GFP_KERNEL);
++		entry->mode = 0555;
++		entry->child = sd_alloc_ctl_cpu_table(i);
++		entry++;
++	}
++
++	WARN_ON(sd_sysctl_header);
++	sd_sysctl_header = register_sysctl_table(sd_ctl_root);
++}
++
++/* may be called multiple times per register */
++static void unregister_sched_domain_sysctl(void)
++{
++	if (sd_sysctl_header)
++		unregister_sysctl_table(sd_sysctl_header);
++	sd_sysctl_header = NULL;
++	if (sd_ctl_dir[0].child)
++		sd_free_ctl_entry(&sd_ctl_dir[0].child);
++}
++#else
++static void register_sched_domain_sysctl(void)
++{
++}
++static void unregister_sched_domain_sysctl(void)
++{
++}
++#endif
++
++static void set_rq_online(struct rq *rq)
++{
++	if (!rq->online) {
++		cpumask_set_cpu(rq->cpu, rq->rd->online);
++		rq->online = 1;
++	}
++}
++
++static void set_rq_offline(struct rq *rq)
++{
++	if (rq->online) {
++		cpumask_clear_cpu(rq->cpu, rq->rd->online);
++		rq->online = 0;
++	}
++}
++
++#ifdef CONFIG_HOTPLUG_CPU
++/*
++ * This cpu is going down, so walk over the tasklist and find tasks that can
++ * only run on this cpu and remove their affinity. Store their value in
++ * unplugged_mask so it can be restored once their correct cpu is online. No
++ * need to do anything special since they'll just move on next reschedule if
++ * they're running.
++ */
++static void remove_cpu(unsigned long cpu)
++{
++	struct task_struct *p, *t;
++
++	read_lock(&tasklist_lock);
++
++	do_each_thread(t, p) {
++		cpumask_t cpus_remaining;
++
++		cpus_and(cpus_remaining, p->cpus_allowed, cpu_online_map);
++		cpu_clear(cpu, cpus_remaining);
++		if (cpus_empty(cpus_remaining)) {
++			p->unplugged_mask = p->cpus_allowed;
++			p->cpus_allowed = cpu_possible_map;
++		}
++	} while_each_thread(t, p);
++
++	read_unlock(&tasklist_lock);
++}
++
++/*
++ * This cpu is coming up so add it to the cpus_allowed.
++ */
++static void add_cpu(unsigned long cpu)
++{
++	struct task_struct *p, *t;
++
++	read_lock(&tasklist_lock);
++
++	do_each_thread(t, p) {
++		/* Have we taken all the cpus from the unplugged_mask back */
++		if (cpus_empty(p->unplugged_mask))
++			continue;
++
++		/* Was this cpu in the unplugged_mask mask */
++		if (cpu_isset(cpu, p->unplugged_mask)) {
++			cpu_set(cpu, p->cpus_allowed);
++			if (cpus_subset(p->unplugged_mask, p->cpus_allowed)) {
++				/*
++				 * Have we set more than the unplugged_mask?
++				 * If so, that means we have remnants set from
++				 * the unplug/plug cycle and need to remove
++				 * them. Then clear the unplugged_mask as we've
++				 * set all the cpus back.
++				 */
++				p->cpus_allowed = p->unplugged_mask;
++				cpus_clear(p->unplugged_mask);
++			}
++		}
++	} while_each_thread(t, p);
++
++	read_unlock(&tasklist_lock);
++}
++#else
++static void add_cpu(unsigned long cpu)
++{
++}
++#endif
++
++/*
++ * migration_call - callback that gets triggered when a CPU is added.
++ */
++static int __cpuinit
++migration_call(struct notifier_block *nfb, unsigned long action, void *hcpu)
++{
++	int cpu = (long)hcpu;
++	unsigned long flags;
++	struct rq *rq;
++
++	switch (action) {
++
++	case CPU_UP_PREPARE:
++	case CPU_UP_PREPARE_FROZEN:
++		break;
++
++	case CPU_ONLINE:
++	case CPU_ONLINE_FROZEN:
++		/* Update our root-domain */
++		rq = cpu_rq(cpu);
++		grq_lock_irqsave(&flags);
++		if (rq->rd) {
++			BUG_ON(!cpumask_test_cpu(cpu, rq->rd->span));
++
++			set_rq_online(rq);
++		}
++		add_cpu(cpu);
++		grq_unlock_irqrestore(&flags);
++		break;
++
++#ifdef CONFIG_HOTPLUG_CPU
++	case CPU_UP_CANCELED:
++	case CPU_UP_CANCELED_FROZEN:
++		break;
++
++	case CPU_DEAD:
++	case CPU_DEAD_FROZEN:
++		cpuset_lock(); /* around calls to cpuset_cpus_allowed_lock() */
++		rq = cpu_rq(cpu);
++		/* Idle task back to normal (off runqueue, low prio) */
++		grq_lock_irq();
++		remove_cpu(cpu);
++		deactivate_task(rq->idle);
++		rq->idle->static_prio = MAX_PRIO;
++		__setscheduler(rq->idle, SCHED_NORMAL, 0);
++		rq->idle->prio = PRIO_LIMIT;
++		update_rq_clock(rq);
++		grq_unlock_irq();
++		cpuset_unlock();
++		break;
++
++	case CPU_DYING:
++	case CPU_DYING_FROZEN:
++		rq = cpu_rq(cpu);
++		grq_lock_irqsave(&flags);
++		if (rq->rd) {
++			BUG_ON(!cpumask_test_cpu(cpu, rq->rd->span));
++			set_rq_offline(rq);
++		}
++		grq_unlock_irqrestore(&flags);
++		break;
++#endif
++	}
++	return NOTIFY_OK;
++}
++
++/*
++ * Register at high priority so that task migration (migrate_all_tasks)
++ * happens before everything else.  This has to be lower priority than
++ * the notifier in the perf_counter subsystem, though.
++ */
++static struct notifier_block __cpuinitdata migration_notifier = {
++	.notifier_call = migration_call,
++	.priority = 10
++};
++
++int __init migration_init(void)
++{
++	void *cpu = (void *)(long)smp_processor_id();
++	int err;
++
++	/* Start one for the boot CPU: */
++	err = migration_call(&migration_notifier, CPU_UP_PREPARE, cpu);
++	BUG_ON(err == NOTIFY_BAD);
++	migration_call(&migration_notifier, CPU_ONLINE, cpu);
++	register_cpu_notifier(&migration_notifier);
++
++	return 0;
++}
++early_initcall(migration_init);
++#endif
++
++/*
++ * sched_domains_mutex serializes calls to arch_init_sched_domains,
++ * detach_destroy_domains and partition_sched_domains.
++ */
++static DEFINE_MUTEX(sched_domains_mutex);
++
++#ifdef CONFIG_SMP
++
++#ifdef CONFIG_SCHED_DEBUG
++
++static int sched_domain_debug_one(struct sched_domain *sd, int cpu, int level,
++				  struct cpumask *groupmask)
++{
++	struct sched_group *group = sd->groups;
++	char str[256];
++
++	cpulist_scnprintf(str, sizeof(str), sched_domain_span(sd));
++	cpumask_clear(groupmask);
++
++	printk(KERN_DEBUG "%*s domain %d: ", level, "", level);
++
++	if (!(sd->flags & SD_LOAD_BALANCE)) {
++		printk("does not load-balance\n");
++		if (sd->parent)
++			printk(KERN_ERR "ERROR: !SD_LOAD_BALANCE domain"
++					" has parent");
++		return -1;
++	}
++
++	printk(KERN_CONT "span %s level %s\n", str, sd->name);
++
++	if (!cpumask_test_cpu(cpu, sched_domain_span(sd))) {
++		printk(KERN_ERR "ERROR: domain->span does not contain "
++				"CPU%d\n", cpu);
++	}
++	if (!cpumask_test_cpu(cpu, sched_group_cpus(group))) {
++		printk(KERN_ERR "ERROR: domain->groups does not contain"
++				" CPU%d\n", cpu);
++	}
++
++	printk(KERN_DEBUG "%*s groups:", level + 1, "");
++	do {
++		if (!group) {
++			printk("\n");
++			printk(KERN_ERR "ERROR: group is NULL\n");
++			break;
++		}
++
++		if (!group->__cpu_power) {
++			printk(KERN_CONT "\n");
++			printk(KERN_ERR "ERROR: domain->cpu_power not "
++					"set\n");
++			break;
++		}
++
++		if (!cpumask_weight(sched_group_cpus(group))) {
++			printk(KERN_CONT "\n");
++			printk(KERN_ERR "ERROR: empty group\n");
++			break;
++		}
++
++		if (cpumask_intersects(groupmask, sched_group_cpus(group))) {
++			printk(KERN_CONT "\n");
++			printk(KERN_ERR "ERROR: repeated CPUs\n");
++			break;
++		}
++
++		cpumask_or(groupmask, groupmask, sched_group_cpus(group));
++
++		cpulist_scnprintf(str, sizeof(str), sched_group_cpus(group));
++
++		printk(KERN_CONT " %s", str);
++		if (group->__cpu_power != SCHED_LOAD_SCALE) {
++			printk(KERN_CONT " (__cpu_power = %d)",
++				group->__cpu_power);
++		}
++
++		group = group->next;
++	} while (group != sd->groups);
++	printk(KERN_CONT "\n");
++
++	if (!cpumask_equal(sched_domain_span(sd), groupmask))
++		printk(KERN_ERR "ERROR: groups don't span domain->span\n");
++
++	if (sd->parent &&
++	    !cpumask_subset(groupmask, sched_domain_span(sd->parent)))
++		printk(KERN_ERR "ERROR: parent span is not a superset "
++			"of domain->span\n");
++	return 0;
++}
++
++static void sched_domain_debug(struct sched_domain *sd, int cpu)
++{
++	cpumask_var_t groupmask;
++	int level = 0;
++
++	if (!sd) {
++		printk(KERN_DEBUG "CPU%d attaching NULL sched-domain.\n", cpu);
++		return;
++	}
++
++	printk(KERN_DEBUG "CPU%d attaching sched-domain:\n", cpu);
++
++	if (!alloc_cpumask_var(&groupmask, GFP_KERNEL)) {
++		printk(KERN_DEBUG "Cannot load-balance (out of memory)\n");
++		return;
++	}
++
++	for (;;) {
++		if (sched_domain_debug_one(sd, cpu, level, groupmask))
++			break;
++		level++;
++		sd = sd->parent;
++		if (!sd)
++			break;
++	}
++	free_cpumask_var(groupmask);
++}
++#else /* !CONFIG_SCHED_DEBUG */
++# define sched_domain_debug(sd, cpu) do { } while (0)
++#endif /* CONFIG_SCHED_DEBUG */
++
++static int sd_degenerate(struct sched_domain *sd)
++{
++	if (cpumask_weight(sched_domain_span(sd)) == 1)
++		return 1;
++
++	/* Following flags need at least 2 groups */
++	if (sd->flags & (SD_LOAD_BALANCE |
++			 SD_BALANCE_NEWIDLE |
++			 SD_BALANCE_FORK |
++			 SD_BALANCE_EXEC |
++			 SD_SHARE_CPUPOWER |
++			 SD_SHARE_PKG_RESOURCES)) {
++		if (sd->groups != sd->groups->next)
++			return 0;
++	}
++
++	/* Following flags don't use groups */
++	if (sd->flags & (SD_WAKE_IDLE |
++			 SD_WAKE_AFFINE |
++			 SD_WAKE_BALANCE))
++		return 0;
++
++	return 1;
++}
++
++static int
++sd_parent_degenerate(struct sched_domain *sd, struct sched_domain *parent)
++{
++	unsigned long cflags = sd->flags, pflags = parent->flags;
++
++	if (sd_degenerate(parent))
++		return 1;
++
++	if (!cpumask_equal(sched_domain_span(sd), sched_domain_span(parent)))
++		return 0;
++
++	/* Does parent contain flags not in child? */
++	/* WAKE_BALANCE is a subset of WAKE_AFFINE */
++	if (cflags & SD_WAKE_AFFINE)
++		pflags &= ~SD_WAKE_BALANCE;
++	/* Flags needing groups don't count if only 1 group in parent */
++	if (parent->groups == parent->groups->next) {
++		pflags &= ~(SD_LOAD_BALANCE |
++				SD_BALANCE_NEWIDLE |
++				SD_BALANCE_FORK |
++				SD_BALANCE_EXEC |
++				SD_SHARE_CPUPOWER |
++				SD_SHARE_PKG_RESOURCES);
++		if (nr_node_ids == 1)
++			pflags &= ~SD_SERIALIZE;
++	}
++	if (~cflags & pflags)
++		return 0;
++
++	return 1;
++}
++
++static void free_rootdomain(struct root_domain *rd)
++{
++	free_cpumask_var(rd->rto_mask);
++	free_cpumask_var(rd->online);
++	free_cpumask_var(rd->span);
++	kfree(rd);
++}
++
++static void rq_attach_root(struct rq *rq, struct root_domain *rd)
++{
++	struct root_domain *old_rd = NULL;
++	unsigned long flags;
++
++	grq_lock_irqsave(&flags);
++
++	if (rq->rd) {
++		old_rd = rq->rd;
++
++		if (cpumask_test_cpu(rq->cpu, old_rd->online))
++			set_rq_offline(rq);
++
++		cpumask_clear_cpu(rq->cpu, old_rd->span);
++
++		/*
++		 * If we dont want to free the old_rt yet then
++		 * set old_rd to NULL to skip the freeing later
++		 * in this function:
++		 */
++		if (!atomic_dec_and_test(&old_rd->refcount))
++			old_rd = NULL;
++	}
++
++	atomic_inc(&rd->refcount);
++	rq->rd = rd;
++
++	cpumask_set_cpu(rq->cpu, rd->span);
++	if (cpumask_test_cpu(rq->cpu, cpu_online_mask))
++		set_rq_online(rq);
++
++	grq_unlock_irqrestore(&flags);
++
++	if (old_rd)
++		free_rootdomain(old_rd);
++}
++
++static int init_rootdomain(struct root_domain *rd, bool bootmem)
++{
++	gfp_t gfp = GFP_KERNEL;
++
++	memset(rd, 0, sizeof(*rd));
++
++	if (bootmem)
++		gfp = GFP_NOWAIT;
++
++	if (!alloc_cpumask_var(&rd->span, gfp))
++		goto out;
++	if (!alloc_cpumask_var(&rd->online, gfp))
++		goto free_span;
++	if (!alloc_cpumask_var(&rd->rto_mask, gfp))
++		goto free_online;
++
++	return 0;
++
++free_online:
++	free_cpumask_var(rd->online);
++free_span:
++	free_cpumask_var(rd->span);
++out:
++	return -ENOMEM;
++}
++
++static void init_defrootdomain(void)
++{
++	init_rootdomain(&def_root_domain, true);
++
++	atomic_set(&def_root_domain.refcount, 1);
++}
++
++static struct root_domain *alloc_rootdomain(void)
++{
++	struct root_domain *rd;
++
++	rd = kmalloc(sizeof(*rd), GFP_KERNEL);
++	if (!rd)
++		return NULL;
++
++	if (init_rootdomain(rd, false) != 0) {
++		kfree(rd);
++		return NULL;
++	}
++
++	return rd;
++}
++
++/*
++ * Attach the domain 'sd' to 'cpu' as its base domain. Callers must
++ * hold the hotplug lock.
++ */
++static void
++cpu_attach_domain(struct sched_domain *sd, struct root_domain *rd, int cpu)
++{
++	struct rq *rq = cpu_rq(cpu);
++	struct sched_domain *tmp;
++
++	/* Remove the sched domains which do not contribute to scheduling. */
++	for (tmp = sd; tmp; ) {
++		struct sched_domain *parent = tmp->parent;
++		if (!parent)
++			break;
++
++		if (sd_parent_degenerate(tmp, parent)) {
++			tmp->parent = parent->parent;
++			if (parent->parent)
++				parent->parent->child = tmp;
++		} else
++			tmp = tmp->parent;
++	}
++
++	if (sd && sd_degenerate(sd)) {
++		sd = sd->parent;
++		if (sd)
++			sd->child = NULL;
++	}
++
++	sched_domain_debug(sd, cpu);
++
++	rq_attach_root(rq, rd);
++	rcu_assign_pointer(rq->sd, sd);
++}
++
++/* cpus with isolated domains */
++static cpumask_var_t cpu_isolated_map;
++
++/* Setup the mask of cpus configured for isolated domains */
++static int __init isolated_cpu_setup(char *str)
++{
++	cpulist_parse(str, cpu_isolated_map);
++	return 1;
++}
++
++__setup("isolcpus=", isolated_cpu_setup);
++
++/*
++ * init_sched_build_groups takes the cpumask we wish to span, and a pointer
++ * to a function which identifies what group(along with sched group) a CPU
++ * belongs to. The return value of group_fn must be a >= 0 and < nr_cpu_ids
++ * (due to the fact that we keep track of groups covered with a struct cpumask).
++ *
++ * init_sched_build_groups will build a circular linked list of the groups
++ * covered by the given span, and will set each group's ->cpumask correctly,
++ * and ->cpu_power to 0.
++ */
++static void
++init_sched_build_groups(const struct cpumask *span,
++			const struct cpumask *cpu_map,
++			int (*group_fn)(int cpu, const struct cpumask *cpu_map,
++					struct sched_group **sg,
++					struct cpumask *tmpmask),
++			struct cpumask *covered, struct cpumask *tmpmask)
++{
++	struct sched_group *first = NULL, *last = NULL;
++	int i;
++
++	cpumask_clear(covered);
++
++	for_each_cpu(i, span) {
++		struct sched_group *sg;
++		int group = group_fn(i, cpu_map, &sg, tmpmask);
++		int j;
++
++		if (cpumask_test_cpu(i, covered))
++			continue;
++
++		cpumask_clear(sched_group_cpus(sg));
++		sg->__cpu_power = 0;
++
++		for_each_cpu(j, span) {
++			if (group_fn(j, cpu_map, NULL, tmpmask) != group)
++				continue;
++
++			cpumask_set_cpu(j, covered);
++			cpumask_set_cpu(j, sched_group_cpus(sg));
++		}
++		if (!first)
++			first = sg;
++		if (last)
++			last->next = sg;
++		last = sg;
++	}
++	last->next = first;
++}
++
++#define SD_NODES_PER_DOMAIN 16
++
++#ifdef CONFIG_NUMA
++
++/**
++ * find_next_best_node - find the next node to include in a sched_domain
++ * @node: node whose sched_domain we're building
++ * @used_nodes: nodes already in the sched_domain
++ *
++ * Find the next node to include in a given scheduling domain. Simply
++ * finds the closest node not already in the @used_nodes map.
++ *
++ * Should use nodemask_t.
++ */
++static int find_next_best_node(int node, nodemask_t *used_nodes)
++{
++	int i, n, val, min_val, best_node = 0;
++
++	min_val = INT_MAX;
++
++	for (i = 0; i < nr_node_ids; i++) {
++		/* Start at @node */
++		n = (node + i) % nr_node_ids;
++
++		if (!nr_cpus_node(n))
++			continue;
++
++		/* Skip already used nodes */
++		if (node_isset(n, *used_nodes))
++			continue;
++
++		/* Simple min distance search */
++		val = node_distance(node, n);
++
++		if (val < min_val) {
++			min_val = val;
++			best_node = n;
++		}
++	}
++
++	node_set(best_node, *used_nodes);
++	return best_node;
++}
++
++/**
++ * sched_domain_node_span - get a cpumask for a node's sched_domain
++ * @node: node whose cpumask we're constructing
++ * @span: resulting cpumask
++ *
++ * Given a node, construct a good cpumask for its sched_domain to span. It
++ * should be one that prevents unnecessary balancing, but also spreads tasks
++ * out optimally.
++ */
++static void sched_domain_node_span(int node, struct cpumask *span)
++{
++	nodemask_t used_nodes;
++	int i;
++
++	cpumask_clear(span);
++	nodes_clear(used_nodes);
++
++	cpumask_or(span, span, cpumask_of_node(node));
++	node_set(node, used_nodes);
++
++	for (i = 1; i < SD_NODES_PER_DOMAIN; i++) {
++		int next_node = find_next_best_node(node, &used_nodes);
++
++		cpumask_or(span, span, cpumask_of_node(next_node));
++	}
++}
++#endif /* CONFIG_NUMA */
++
++int sched_smt_power_savings = 0, sched_mc_power_savings = 0;
++
++/*
++ * The cpus mask in sched_group and sched_domain hangs off the end.
++ *
++ * ( See the the comments in include/linux/sched.h:struct sched_group
++ *   and struct sched_domain. )
++ */
++struct static_sched_group {
++	struct sched_group sg;
++	DECLARE_BITMAP(cpus, CONFIG_NR_CPUS);
++};
++
++struct static_sched_domain {
++	struct sched_domain sd;
++	DECLARE_BITMAP(span, CONFIG_NR_CPUS);
++};
++
++/*
++ * SMT sched-domains:
++ */
++#ifdef CONFIG_SCHED_SMT
++static DEFINE_PER_CPU(struct static_sched_domain, cpu_domains);
++static DEFINE_PER_CPU(struct static_sched_group, sched_group_cpus);
++
++static int
++cpu_to_cpu_group(int cpu, const struct cpumask *cpu_map,
++		 struct sched_group **sg, struct cpumask *unused)
++{
++	if (sg)
++		*sg = &per_cpu(sched_group_cpus, cpu).sg;
++	return cpu;
++}
++#endif /* CONFIG_SCHED_SMT */
++
++/*
++ * multi-core sched-domains:
++ */
++#ifdef CONFIG_SCHED_MC
++static DEFINE_PER_CPU(struct static_sched_domain, core_domains);
++static DEFINE_PER_CPU(struct static_sched_group, sched_group_core);
++#endif /* CONFIG_SCHED_MC */
++
++#if defined(CONFIG_SCHED_MC) && defined(CONFIG_SCHED_SMT)
++static int
++cpu_to_core_group(int cpu, const struct cpumask *cpu_map,
++		  struct sched_group **sg, struct cpumask *mask)
++{
++	int group;
++
++	cpumask_and(mask, topology_thread_cpumask(cpu), cpu_map);
++	group = cpumask_first(mask);
++	if (sg)
++		*sg = &per_cpu(sched_group_core, group).sg;
++	return group;
++}
++#elif defined(CONFIG_SCHED_MC)
++static int
++cpu_to_core_group(int cpu, const struct cpumask *cpu_map,
++		  struct sched_group **sg, struct cpumask *unused)
++{
++	if (sg)
++		*sg = &per_cpu(sched_group_core, cpu).sg;
++	return cpu;
++}
++#endif
++
++static DEFINE_PER_CPU(struct static_sched_domain, phys_domains);
++static DEFINE_PER_CPU(struct static_sched_group, sched_group_phys);
++
++static int
++cpu_to_phys_group(int cpu, const struct cpumask *cpu_map,
++		  struct sched_group **sg, struct cpumask *mask)
++{
++	int group;
++#ifdef CONFIG_SCHED_MC
++	cpumask_and(mask, cpu_coregroup_mask(cpu), cpu_map);
++	group = cpumask_first(mask);
++#elif defined(CONFIG_SCHED_SMT)
++	cpumask_and(mask, topology_thread_cpumask(cpu), cpu_map);
++	group = cpumask_first(mask);
++#else
++	group = cpu;
++#endif
++	if (sg)
++		*sg = &per_cpu(sched_group_phys, group).sg;
++	return group;
++}
++
++/**
++ * group_first_cpu - Returns the first cpu in the cpumask of a sched_group.
++ * @group: The group whose first cpu is to be returned.
++ */
++static inline unsigned int group_first_cpu(struct sched_group *group)
++{
++	return cpumask_first(sched_group_cpus(group));
++}
++
++#ifdef CONFIG_NUMA
++/*
++ * The init_sched_build_groups can't handle what we want to do with node
++ * groups, so roll our own. Now each node has its own list of groups which
++ * gets dynamically allocated.
++ */
++static DEFINE_PER_CPU(struct static_sched_domain, node_domains);
++static struct sched_group ***sched_group_nodes_bycpu;
++
++static DEFINE_PER_CPU(struct static_sched_domain, allnodes_domains);
++static DEFINE_PER_CPU(struct static_sched_group, sched_group_allnodes);
++
++static int cpu_to_allnodes_group(int cpu, const struct cpumask *cpu_map,
++				 struct sched_group **sg,
++				 struct cpumask *nodemask)
++{
++	int group;
++
++	cpumask_and(nodemask, cpumask_of_node(cpu_to_node(cpu)), cpu_map);
++	group = cpumask_first(nodemask);
++
++	if (sg)
++		*sg = &per_cpu(sched_group_allnodes, group).sg;
++	return group;
++}
++
++static void init_numa_sched_groups_power(struct sched_group *group_head)
++{
++	struct sched_group *sg = group_head;
++	int j;
++
++	if (!sg)
++		return;
++	do {
++		for_each_cpu(j, sched_group_cpus(sg)) {
++			struct sched_domain *sd;
++
++			sd = &per_cpu(phys_domains, j).sd;
++			if (j != group_first_cpu(sd->groups)) {
++				/*
++				 * Only add "power" once for each
++				 * physical package.
++				 */
++				continue;
++			}
++
++			sg_inc_cpu_power(sg, sd->groups->__cpu_power);
++		}
++		sg = sg->next;
++	} while (sg != group_head);
++}
++#endif /* CONFIG_NUMA */
++
++#ifdef CONFIG_NUMA
++/* Free memory allocated for various sched_group structures */
++static void free_sched_groups(const struct cpumask *cpu_map,
++			      struct cpumask *nodemask)
++{
++	int cpu, i;
++
++	for_each_cpu(cpu, cpu_map) {
++		struct sched_group **sched_group_nodes
++			= sched_group_nodes_bycpu[cpu];
++
++		if (!sched_group_nodes)
++			continue;
++
++		for (i = 0; i < nr_node_ids; i++) {
++			struct sched_group *oldsg, *sg = sched_group_nodes[i];
++
++			cpumask_and(nodemask, cpumask_of_node(i), cpu_map);
++			if (cpumask_empty(nodemask))
++				continue;
++
++			if (sg == NULL)
++				continue;
++			sg = sg->next;
++next_sg:
++			oldsg = sg;
++			sg = sg->next;
++			kfree(oldsg);
++			if (oldsg != sched_group_nodes[i])
++				goto next_sg;
++		}
++		kfree(sched_group_nodes);
++		sched_group_nodes_bycpu[cpu] = NULL;
++	}
++}
++#else /* !CONFIG_NUMA */
++static void free_sched_groups(const struct cpumask *cpu_map,
++			      struct cpumask *nodemask)
++{
++}
++#endif /* CONFIG_NUMA */
++
++/*
++ * Initialize sched groups cpu_power.
++ *
++ * cpu_power indicates the capacity of sched group, which is used while
++ * distributing the load between different sched groups in a sched domain.
++ * Typically cpu_power for all the groups in a sched domain will be same unless
++ * there are asymmetries in the topology. If there are asymmetries, group
++ * having more cpu_power will pickup more load compared to the group having
++ * less cpu_power.
++ *
++ * cpu_power will be a multiple of SCHED_LOAD_SCALE. This multiple represents
++ * the maximum number of tasks a group can handle in the presence of other idle
++ * or lightly loaded groups in the same sched domain.
++ */
++static void init_sched_groups_power(int cpu, struct sched_domain *sd)
++{
++	struct sched_domain *child;
++	struct sched_group *group;
++
++	WARN_ON(!sd || !sd->groups);
++
++	if (cpu != group_first_cpu(sd->groups))
++		return;
++
++	child = sd->child;
++
++	sd->groups->__cpu_power = 0;
++
++	/*
++	 * For perf policy, if the groups in child domain share resources
++	 * (for example cores sharing some portions of the cache hierarchy
++	 * or SMT), then set this domain groups cpu_power such that each group
++	 * can handle only one task, when there are other idle groups in the
++	 * same sched domain.
++	 */
++	if (!child || (!(sd->flags & SD_POWERSAVINGS_BALANCE) &&
++		       (child->flags &
++			(SD_SHARE_CPUPOWER | SD_SHARE_PKG_RESOURCES)))) {
++		sg_inc_cpu_power(sd->groups, SCHED_LOAD_SCALE);
++		return;
++	}
++
++	/*
++	 * add cpu_power of each child group to this groups cpu_power
++	 */
++	group = child->groups;
++	do {
++		sg_inc_cpu_power(sd->groups, group->__cpu_power);
++		group = group->next;
++	} while (group != child->groups);
++}
++
++/*
++ * Initializers for schedule domains
++ * Non-inlined to reduce accumulated stack pressure in build_sched_domains()
++ */
++
++#ifdef CONFIG_SCHED_DEBUG
++# define SD_INIT_NAME(sd, type)		sd->name = #type
++#else
++# define SD_INIT_NAME(sd, type)		do { } while (0)
++#endif
++
++#define	SD_INIT(sd, type)	sd_init_##type(sd)
++
++#define SD_INIT_FUNC(type)	\
++static noinline void sd_init_##type(struct sched_domain *sd)	\
++{								\
++	memset(sd, 0, sizeof(*sd));				\
++	*sd = SD_##type##_INIT;					\
++	sd->level = SD_LV_##type;				\
++	SD_INIT_NAME(sd, type);					\
++}
++
++SD_INIT_FUNC(CPU)
++#ifdef CONFIG_NUMA
++ SD_INIT_FUNC(ALLNODES)
++ SD_INIT_FUNC(NODE)
++#endif
++#ifdef CONFIG_SCHED_SMT
++ SD_INIT_FUNC(SIBLING)
++#endif
++#ifdef CONFIG_SCHED_MC
++ SD_INIT_FUNC(MC)
++#endif
++
++static int default_relax_domain_level = -1;
++
++static int __init setup_relax_domain_level(char *str)
++{
++	unsigned long val;
++
++	val = simple_strtoul(str, NULL, 0);
++	if (val < SD_LV_MAX)
++		default_relax_domain_level = val;
++
++	return 1;
++}
++__setup("relax_domain_level=", setup_relax_domain_level);
++
++static void set_domain_attribute(struct sched_domain *sd,
++				 struct sched_domain_attr *attr)
++{
++	int request;
++
++	if (!attr || attr->relax_domain_level < 0) {
++		if (default_relax_domain_level < 0)
++			return;
++		else
++			request = default_relax_domain_level;
++	} else
++		request = attr->relax_domain_level;
++	if (request < sd->level) {
++		/* turn off idle balance on this domain */
++		sd->flags &= ~(SD_WAKE_IDLE|SD_BALANCE_NEWIDLE);
++	} else {
++		/* turn on idle balance on this domain */
++		sd->flags |= (SD_WAKE_IDLE_FAR|SD_BALANCE_NEWIDLE);
++	}
++}
++
++/*
++ * Build sched domains for a given set of cpus and attach the sched domains
++ * to the individual cpus
++ */
++static int __build_sched_domains(const struct cpumask *cpu_map,
++				 struct sched_domain_attr *attr)
++{
++	int i, err = -ENOMEM;
++	struct root_domain *rd;
++	cpumask_var_t nodemask, this_sibling_map, this_core_map, send_covered,
++		tmpmask;
++#ifdef CONFIG_NUMA
++	cpumask_var_t domainspan, covered, notcovered;
++	struct sched_group **sched_group_nodes = NULL;
++	int sd_allnodes = 0;
++
++	if (!alloc_cpumask_var(&domainspan, GFP_KERNEL))
++		goto out;
++	if (!alloc_cpumask_var(&covered, GFP_KERNEL))
++		goto free_domainspan;
++	if (!alloc_cpumask_var(&notcovered, GFP_KERNEL))
++		goto free_covered;
++#endif
++
++	if (!alloc_cpumask_var(&nodemask, GFP_KERNEL))
++		goto free_notcovered;
++	if (!alloc_cpumask_var(&this_sibling_map, GFP_KERNEL))
++		goto free_nodemask;
++	if (!alloc_cpumask_var(&this_core_map, GFP_KERNEL))
++		goto free_this_sibling_map;
++	if (!alloc_cpumask_var(&send_covered, GFP_KERNEL))
++		goto free_this_core_map;
++	if (!alloc_cpumask_var(&tmpmask, GFP_KERNEL))
++		goto free_send_covered;
++
++#ifdef CONFIG_NUMA
++	/*
++	 * Allocate the per-node list of sched groups
++	 */
++	sched_group_nodes = kcalloc(nr_node_ids, sizeof(struct sched_group *),
++				    GFP_KERNEL);
++	if (!sched_group_nodes) {
++		printk(KERN_WARNING "Can not alloc sched group node list\n");
++		goto free_tmpmask;
++	}
++#endif
++
++	rd = alloc_rootdomain();
++	if (!rd) {
++		printk(KERN_WARNING "Cannot alloc root domain\n");
++		goto free_sched_groups;
++	}
++
++#ifdef CONFIG_NUMA
++	sched_group_nodes_bycpu[cpumask_first(cpu_map)] = sched_group_nodes;
++#endif
++
++	/*
++	 * Set up domains for cpus specified by the cpu_map.
++	 */
++	for_each_cpu(i, cpu_map) {
++		struct sched_domain *sd = NULL, *p;
++
++		cpumask_and(nodemask, cpumask_of_node(cpu_to_node(i)), cpu_map);
++
++#ifdef CONFIG_NUMA
++		if (cpumask_weight(cpu_map) >
++				SD_NODES_PER_DOMAIN*cpumask_weight(nodemask)) {
++			sd = &per_cpu(allnodes_domains, i).sd;
++			SD_INIT(sd, ALLNODES);
++			set_domain_attribute(sd, attr);
++			cpumask_copy(sched_domain_span(sd), cpu_map);
++			cpu_to_allnodes_group(i, cpu_map, &sd->groups, tmpmask);
++			p = sd;
++			sd_allnodes = 1;
++		} else
++			p = NULL;
++
++		sd = &per_cpu(node_domains, i).sd;
++		SD_INIT(sd, NODE);
++		set_domain_attribute(sd, attr);
++		sched_domain_node_span(cpu_to_node(i), sched_domain_span(sd));
++		sd->parent = p;
++		if (p)
++			p->child = sd;
++		cpumask_and(sched_domain_span(sd),
++			    sched_domain_span(sd), cpu_map);
++#endif
++
++		p = sd;
++		sd = &per_cpu(phys_domains, i).sd;
++		SD_INIT(sd, CPU);
++		set_domain_attribute(sd, attr);
++		cpumask_copy(sched_domain_span(sd), nodemask);
++		sd->parent = p;
++		if (p)
++			p->child = sd;
++		cpu_to_phys_group(i, cpu_map, &sd->groups, tmpmask);
++
++#ifdef CONFIG_SCHED_MC
++		p = sd;
++		sd = &per_cpu(core_domains, i).sd;
++		SD_INIT(sd, MC);
++		set_domain_attribute(sd, attr);
++		cpumask_and(sched_domain_span(sd), cpu_map,
++						   cpu_coregroup_mask(i));
++		sd->parent = p;
++		p->child = sd;
++		cpu_to_core_group(i, cpu_map, &sd->groups, tmpmask);
++#endif
++
++#ifdef CONFIG_SCHED_SMT
++		p = sd;
++		sd = &per_cpu(cpu_domains, i).sd;
++		SD_INIT(sd, SIBLING);
++		set_domain_attribute(sd, attr);
++		cpumask_and(sched_domain_span(sd),
++			    topology_thread_cpumask(i), cpu_map);
++		sd->parent = p;
++		p->child = sd;
++		cpu_to_cpu_group(i, cpu_map, &sd->groups, tmpmask);
++#endif
++	}
++
++#ifdef CONFIG_SCHED_SMT
++	/* Set up CPU (sibling) groups */
++	for_each_cpu(i, cpu_map) {
++		cpumask_and(this_sibling_map,
++			    topology_thread_cpumask(i), cpu_map);
++		if (i != cpumask_first(this_sibling_map))
++			continue;
++
++		init_sched_build_groups(this_sibling_map, cpu_map,
++					&cpu_to_cpu_group,
++					send_covered, tmpmask);
++	}
++#endif
++
++#ifdef CONFIG_SCHED_MC
++	/* Set up multi-core groups */
++	for_each_cpu(i, cpu_map) {
++		cpumask_and(this_core_map, cpu_coregroup_mask(i), cpu_map);
++		if (i != cpumask_first(this_core_map))
++			continue;
++
++		init_sched_build_groups(this_core_map, cpu_map,
++					&cpu_to_core_group,
++					send_covered, tmpmask);
++	}
++#endif
++
++	/* Set up physical groups */
++	for (i = 0; i < nr_node_ids; i++) {
++		cpumask_and(nodemask, cpumask_of_node(i), cpu_map);
++		if (cpumask_empty(nodemask))
++			continue;
++
++		init_sched_build_groups(nodemask, cpu_map,
++					&cpu_to_phys_group,
++					send_covered, tmpmask);
++	}
++
++#ifdef CONFIG_NUMA
++	/* Set up node groups */
++	if (sd_allnodes) {
++		init_sched_build_groups(cpu_map, cpu_map,
++					&cpu_to_allnodes_group,
++					send_covered, tmpmask);
++	}
++
++	for (i = 0; i < nr_node_ids; i++) {
++		/* Set up node groups */
++		struct sched_group *sg, *prev;
++		int j;
++
++		cpumask_clear(covered);
++		cpumask_and(nodemask, cpumask_of_node(i), cpu_map);
++		if (cpumask_empty(nodemask)) {
++			sched_group_nodes[i] = NULL;
++			continue;
++		}
++
++		sched_domain_node_span(i, domainspan);
++		cpumask_and(domainspan, domainspan, cpu_map);
++
++		sg = kmalloc_node(sizeof(struct sched_group) + cpumask_size(),
++				  GFP_KERNEL, i);
++		if (!sg) {
++			printk(KERN_WARNING "Can not alloc domain group for "
++				"node %d\n", i);
++			goto error;
++		}
++		sched_group_nodes[i] = sg;
++		for_each_cpu(j, nodemask) {
++			struct sched_domain *sd;
++
++			sd = &per_cpu(node_domains, j).sd;
++			sd->groups = sg;
++		}
++		sg->__cpu_power = 0;
++		cpumask_copy(sched_group_cpus(sg), nodemask);
++		sg->next = sg;
++		cpumask_or(covered, covered, nodemask);
++		prev = sg;
++
++		for (j = 0; j < nr_node_ids; j++) {
++			int n = (i + j) % nr_node_ids;
++
++			cpumask_complement(notcovered, covered);
++			cpumask_and(tmpmask, notcovered, cpu_map);
++			cpumask_and(tmpmask, tmpmask, domainspan);
++			if (cpumask_empty(tmpmask))
++				break;
++
++			cpumask_and(tmpmask, tmpmask, cpumask_of_node(n));
++			if (cpumask_empty(tmpmask))
++				continue;
++
++			sg = kmalloc_node(sizeof(struct sched_group) +
++					  cpumask_size(),
++					  GFP_KERNEL, i);
++			if (!sg) {
++				printk(KERN_WARNING
++				"Can not alloc domain group for node %d\n", j);
++				goto error;
++			}
++			sg->__cpu_power = 0;
++			cpumask_copy(sched_group_cpus(sg), tmpmask);
++			sg->next = prev->next;
++			cpumask_or(covered, covered, tmpmask);
++			prev->next = sg;
++			prev = sg;
++		}
++	}
++#endif
++
++	/* Calculate CPU power for physical packages and nodes */
++#ifdef CONFIG_SCHED_SMT
++	for_each_cpu(i, cpu_map) {
++		struct sched_domain *sd = &per_cpu(cpu_domains, i).sd;
++
++		init_sched_groups_power(i, sd);
++	}
++#endif
++#ifdef CONFIG_SCHED_MC
++	for_each_cpu(i, cpu_map) {
++		struct sched_domain *sd = &per_cpu(core_domains, i).sd;
++
++		init_sched_groups_power(i, sd);
++	}
++#endif
++
++	for_each_cpu(i, cpu_map) {
++		struct sched_domain *sd = &per_cpu(phys_domains, i).sd;
++
++		init_sched_groups_power(i, sd);
++	}
++
++#ifdef CONFIG_NUMA
++	for (i = 0; i < nr_node_ids; i++)
++		init_numa_sched_groups_power(sched_group_nodes[i]);
++
++	if (sd_allnodes) {
++		struct sched_group *sg;
++
++		cpu_to_allnodes_group(cpumask_first(cpu_map), cpu_map, &sg,
++								tmpmask);
++		init_numa_sched_groups_power(sg);
++	}
++#endif
++
++	/* Attach the domains */
++	for_each_cpu(i, cpu_map) {
++		struct sched_domain *sd;
++#ifdef CONFIG_SCHED_SMT
++		sd = &per_cpu(cpu_domains, i).sd;
++#elif defined(CONFIG_SCHED_MC)
++		sd = &per_cpu(core_domains, i).sd;
++#else
++		sd = &per_cpu(phys_domains, i).sd;
++#endif
++		cpu_attach_domain(sd, rd, i);
++	}
++
++	err = 0;
++
++free_tmpmask:
++	free_cpumask_var(tmpmask);
++free_send_covered:
++	free_cpumask_var(send_covered);
++free_this_core_map:
++	free_cpumask_var(this_core_map);
++free_this_sibling_map:
++	free_cpumask_var(this_sibling_map);
++free_nodemask:
++	free_cpumask_var(nodemask);
++free_notcovered:
++#ifdef CONFIG_NUMA
++	free_cpumask_var(notcovered);
++free_covered:
++	free_cpumask_var(covered);
++free_domainspan:
++	free_cpumask_var(domainspan);
++out:
++#endif
++	return err;
++
++free_sched_groups:
++#ifdef CONFIG_NUMA
++	kfree(sched_group_nodes);
++#endif
++	goto free_tmpmask;
++
++#ifdef CONFIG_NUMA
++error:
++	free_sched_groups(cpu_map, tmpmask);
++	free_rootdomain(rd);
++	goto free_tmpmask;
++#endif
++}
++
++static int build_sched_domains(const struct cpumask *cpu_map)
++{
++	return __build_sched_domains(cpu_map, NULL);
++}
++
++static struct cpumask *doms_cur;	/* current sched domains */
++static int ndoms_cur;		/* number of sched domains in 'doms_cur' */
++static struct sched_domain_attr *dattr_cur;
++				/* attribues of custom domains in 'doms_cur' */
++
++/*
++ * Special case: If a kmalloc of a doms_cur partition (array of
++ * cpumask) fails, then fallback to a single sched domain,
++ * as determined by the single cpumask fallback_doms.
++ */
++static cpumask_var_t fallback_doms;
++
++/*
++ * arch_update_cpu_topology lets virtualized architectures update the
++ * cpu core maps. It is supposed to return 1 if the topology changed
++ * or 0 if it stayed the same.
++ */
++int __attribute__((weak)) arch_update_cpu_topology(void)
++{
++	return 0;
++}
++
++/*
++ * Set up scheduler domains and groups. Callers must hold the hotplug lock.
++ * For now this just excludes isolated cpus, but could be used to
++ * exclude other special cases in the future.
++ */
++static int arch_init_sched_domains(const struct cpumask *cpu_map)
++{
++	int err;
++
++	arch_update_cpu_topology();
++	ndoms_cur = 1;
++	doms_cur = kmalloc(cpumask_size(), GFP_KERNEL);
++	if (!doms_cur)
++		doms_cur = fallback_doms;
++	cpumask_andnot(doms_cur, cpu_map, cpu_isolated_map);
++	dattr_cur = NULL;
++	err = build_sched_domains(doms_cur);
++	register_sched_domain_sysctl();
++
++	return err;
++}
++
++static void arch_destroy_sched_domains(const struct cpumask *cpu_map,
++				       struct cpumask *tmpmask)
++{
++	free_sched_groups(cpu_map, tmpmask);
++}
++
++/*
++ * Detach sched domains from a group of cpus specified in cpu_map
++ * These cpus will now be attached to the NULL domain
++ */
++static void detach_destroy_domains(const struct cpumask *cpu_map)
++{
++	/* Save because hotplug lock held. */
++	static DECLARE_BITMAP(tmpmask, CONFIG_NR_CPUS);
++	int i;
++
++	for_each_cpu(i, cpu_map)
++		cpu_attach_domain(NULL, &def_root_domain, i);
++	synchronize_sched();
++	arch_destroy_sched_domains(cpu_map, to_cpumask(tmpmask));
++}
++
++/* handle null as "default" */
++static int dattrs_equal(struct sched_domain_attr *cur, int idx_cur,
++			struct sched_domain_attr *new, int idx_new)
++{
++	struct sched_domain_attr tmp;
++
++	/* fast path */
++	if (!new && !cur)
++		return 1;
++
++	tmp = SD_ATTR_INIT;
++	return !memcmp(cur ? (cur + idx_cur) : &tmp,
++			new ? (new + idx_new) : &tmp,
++			sizeof(struct sched_domain_attr));
++}
++
++/*
++ * Partition sched domains as specified by the 'ndoms_new'
++ * cpumasks in the array doms_new[] of cpumasks. This compares
++ * doms_new[] to the current sched domain partitioning, doms_cur[].
++ * It destroys each deleted domain and builds each new domain.
++ *
++ * 'doms_new' is an array of cpumask's of length 'ndoms_new'.
++ * The masks don't intersect (don't overlap.) We should setup one
++ * sched domain for each mask. CPUs not in any of the cpumasks will
++ * not be load balanced. If the same cpumask appears both in the
++ * current 'doms_cur' domains and in the new 'doms_new', we can leave
++ * it as it is.
++ *
++ * The passed in 'doms_new' should be kmalloc'd. This routine takes
++ * ownership of it and will kfree it when done with it. If the caller
++ * failed the kmalloc call, then it can pass in doms_new == NULL &&
++ * ndoms_new == 1, and partition_sched_domains() will fallback to
++ * the single partition 'fallback_doms', it also forces the domains
++ * to be rebuilt.
++ *
++ * If doms_new == NULL it will be replaced with cpu_online_mask.
++ * ndoms_new == 0 is a special case for destroying existing domains,
++ * and it will not create the default domain.
++ *
++ * Call with hotplug lock held
++ */
++/* FIXME: Change to struct cpumask *doms_new[] */
++void partition_sched_domains(int ndoms_new, struct cpumask *doms_new,
++			     struct sched_domain_attr *dattr_new)
++{
++	int i, j, n;
++	int new_topology;
++
++	mutex_lock(&sched_domains_mutex);
++
++	/* always unregister in case we don't destroy any domains */
++	unregister_sched_domain_sysctl();
++
++	/* Let architecture update cpu core mappings. */
++	new_topology = arch_update_cpu_topology();
++
++	n = doms_new ? ndoms_new : 0;
++
++	/* Destroy deleted domains */
++	for (i = 0; i < ndoms_cur; i++) {
++		for (j = 0; j < n && !new_topology; j++) {
++			if (cpumask_equal(&doms_cur[i], &doms_new[j])
++			    && dattrs_equal(dattr_cur, i, dattr_new, j))
++				goto match1;
++		}
++		/* no match - a current sched domain not in new doms_new[] */
++		detach_destroy_domains(doms_cur + i);
++match1:
++		;
++	}
++
++	if (doms_new == NULL) {
++		ndoms_cur = 0;
++		doms_new = fallback_doms;
++		cpumask_andnot(&doms_new[0], cpu_online_mask, cpu_isolated_map);
++		WARN_ON_ONCE(dattr_new);
++	}
++
++	/* Build new domains */
++	for (i = 0; i < ndoms_new; i++) {
++		for (j = 0; j < ndoms_cur && !new_topology; j++) {
++			if (cpumask_equal(&doms_new[i], &doms_cur[j])
++			    && dattrs_equal(dattr_new, i, dattr_cur, j))
++				goto match2;
++		}
++		/* no match - add a new doms_new */
++		__build_sched_domains(doms_new + i,
++					dattr_new ? dattr_new + i : NULL);
++match2:
++		;
++	}
++
++	/* Remember the new sched domains */
++	if (doms_cur != fallback_doms)
++		kfree(doms_cur);
++	kfree(dattr_cur);	/* kfree(NULL) is safe */
++	doms_cur = doms_new;
++	dattr_cur = dattr_new;
++	ndoms_cur = ndoms_new;
++
++	register_sched_domain_sysctl();
++
++	mutex_unlock(&sched_domains_mutex);
++}
++
++#if defined(CONFIG_SCHED_MC) || defined(CONFIG_SCHED_SMT)
++static void arch_reinit_sched_domains(void)
++{
++	get_online_cpus();
++
++	/* Destroy domains first to force the rebuild */
++	partition_sched_domains(0, NULL, NULL);
++
++	rebuild_sched_domains();
++	put_online_cpus();
++}
++
++static ssize_t sched_power_savings_store(const char *buf, size_t count, int smt)
++{
++	unsigned int level = 0;
++
++	if (sscanf(buf, "%u", &level) != 1)
++		return -EINVAL;
++
++	/*
++	 * level is always be positive so don't check for
++	 * level < POWERSAVINGS_BALANCE_NONE which is 0
++	 * What happens on 0 or 1 byte write,
++	 * need to check for count as well?
++	 */
++
++	if (level >= MAX_POWERSAVINGS_BALANCE_LEVELS)
++		return -EINVAL;
++
++	if (smt)
++		sched_smt_power_savings = level;
++	else
++		sched_mc_power_savings = level;
++
++	arch_reinit_sched_domains();
++
++	return count;
++}
++
++#ifdef CONFIG_SCHED_MC
++static ssize_t sched_mc_power_savings_show(struct sysdev_class *class,
++					   char *page)
++{
++	return sprintf(page, "%u\n", sched_mc_power_savings);
++}
++static ssize_t sched_mc_power_savings_store(struct sysdev_class *class,
++					    const char *buf, size_t count)
++{
++	return sched_power_savings_store(buf, count, 0);
++}
++static SYSDEV_CLASS_ATTR(sched_mc_power_savings, 0644,
++			 sched_mc_power_savings_show,
++			 sched_mc_power_savings_store);
++#endif
++
++#ifdef CONFIG_SCHED_SMT
++static ssize_t sched_smt_power_savings_show(struct sysdev_class *dev,
++					    char *page)
++{
++	return sprintf(page, "%u\n", sched_smt_power_savings);
++}
++static ssize_t sched_smt_power_savings_store(struct sysdev_class *dev,
++					     const char *buf, size_t count)
++{
++	return sched_power_savings_store(buf, count, 1);
++}
++static SYSDEV_CLASS_ATTR(sched_smt_power_savings, 0644,
++		   sched_smt_power_savings_show,
++		   sched_smt_power_savings_store);
++#endif
++
++int __init sched_create_sysfs_power_savings_entries(struct sysdev_class *cls)
++{
++	int err = 0;
++
++#ifdef CONFIG_SCHED_SMT
++	if (smt_capable())
++		err = sysfs_create_file(&cls->kset.kobj,
++					&attr_sched_smt_power_savings.attr);
++#endif
++#ifdef CONFIG_SCHED_MC
++	if (!err && mc_capable())
++		err = sysfs_create_file(&cls->kset.kobj,
++					&attr_sched_mc_power_savings.attr);
++#endif
++	return err;
++}
++#endif /* CONFIG_SCHED_MC || CONFIG_SCHED_SMT */
++
++#ifndef CONFIG_CPUSETS
++/*
++ * Add online and remove offline CPUs from the scheduler domains.
++ * When cpusets are enabled they take over this function.
++ */
++static int update_sched_domains(struct notifier_block *nfb,
++				unsigned long action, void *hcpu)
++{
++	switch (action) {
++	case CPU_ONLINE:
++	case CPU_ONLINE_FROZEN:
++	case CPU_DEAD:
++	case CPU_DEAD_FROZEN:
++		partition_sched_domains(1, NULL, NULL);
++		return NOTIFY_OK;
++
++	default:
++		return NOTIFY_DONE;
++	}
++}
++#endif
++
++static int update_runtime(struct notifier_block *nfb,
++				unsigned long action, void *hcpu)
++{
++	switch (action) {
++	case CPU_DOWN_PREPARE:
++	case CPU_DOWN_PREPARE_FROZEN:
++		return NOTIFY_OK;
++
++	case CPU_DOWN_FAILED:
++	case CPU_DOWN_FAILED_FROZEN:
++	case CPU_ONLINE:
++	case CPU_ONLINE_FROZEN:
++		return NOTIFY_OK;
++
++	default:
++		return NOTIFY_DONE;
++	}
++}
++
++void __init sched_init_smp(void)
++{
++	cpumask_var_t non_isolated_cpus;
++
++	alloc_cpumask_var(&non_isolated_cpus, GFP_KERNEL);
++
++#if defined(CONFIG_NUMA)
++	sched_group_nodes_bycpu = kzalloc(nr_cpu_ids * sizeof(void **),
++								GFP_KERNEL);
++	BUG_ON(sched_group_nodes_bycpu == NULL);
++#endif
++	get_online_cpus();
++	mutex_lock(&sched_domains_mutex);
++	arch_init_sched_domains(cpu_online_mask);
++	cpumask_andnot(non_isolated_cpus, cpu_possible_mask, cpu_isolated_map);
++	if (cpumask_empty(non_isolated_cpus))
++		cpumask_set_cpu(smp_processor_id(), non_isolated_cpus);
++	mutex_unlock(&sched_domains_mutex);
++	put_online_cpus();
++
++#ifndef CONFIG_CPUSETS
++	/* XXX: Theoretical race here - CPU may be hotplugged now */
++	hotcpu_notifier(update_sched_domains, 0);
++#endif
++
++	/* RT runtime code needs to handle some hotplug events */
++	hotcpu_notifier(update_runtime, 0);
++
++	/* Move init over to a non-isolated CPU */
++	if (set_cpus_allowed_ptr(current, non_isolated_cpus) < 0)
++		BUG();
++	free_cpumask_var(non_isolated_cpus);
++
++	alloc_cpumask_var(&fallback_doms, GFP_KERNEL);
++
++	/*
++	 * Assume that every added cpu gives us slightly less overall latency
++	 * allowing us to increase the base rr_interval, but in a non linear
++	 * fashion.
++	 */
++	rr_interval *= 1 + ilog2(num_online_cpus());
++}
++#else
++void __init sched_init_smp(void)
++{
++}
++#endif /* CONFIG_SMP */
++
++unsigned int sysctl_timer_migration = 1;
++
++int in_sched_functions(unsigned long addr)
++{
++	return in_lock_functions(addr) ||
++		(addr >= (unsigned long)__sched_text_start
++		&& addr < (unsigned long)__sched_text_end);
++}
++
++void __init sched_init(void)
++{
++	int i;
++	int highest_cpu = 0;
++
++	prio_ratios[0] = 100;
++	for (i = 1 ; i < PRIO_RANGE ; i++)
++		prio_ratios[i] = prio_ratios[i - 1] * 11 / 10;
++
++#ifdef CONFIG_SMP
++	init_defrootdomain();
++	cpus_clear(grq.cpu_idle_map);
++#endif
++	spin_lock_init(&grq.lock);
++	for_each_possible_cpu(i) {
++		struct rq *rq;
++
++		rq = cpu_rq(i);
++		INIT_LIST_HEAD(&rq->queue);
++		rq->rq_deadline = 0;
++		rq->rq_prio = 0;
++		rq->cpu = i;
++		rq->user_pc = rq->nice_pc = rq->softirq_pc = rq->system_pc =
++			      rq->iowait_pc = rq->idle_pc = 0;
++#ifdef CONFIG_SMP
++		rq->sd = NULL;
++		rq->rd = NULL;
++		rq->online = 0;
++		INIT_LIST_HEAD(&rq->migration_queue);
++		rq_attach_root(rq, &def_root_domain);
++#endif
++		atomic_set(&rq->nr_iowait, 0);
++		highest_cpu = i;
++	}
++	grq.iso_ticks = grq.nr_running = grq.nr_uninterruptible = 0;
++	for (i = 0; i < PRIO_LIMIT; i++)
++		INIT_LIST_HEAD(grq.queue + i);
++	bitmap_zero(grq.prio_bitmap, PRIO_LIMIT);
++	/* delimiter for bitsearch */
++	__set_bit(PRIO_LIMIT, grq.prio_bitmap);
++
++#ifdef CONFIG_SMP
++	nr_cpu_ids = highest_cpu + 1;
++#endif
++
++#ifdef CONFIG_PREEMPT_NOTIFIERS
++	INIT_HLIST_HEAD(&init_task.preempt_notifiers);
++#endif
++
++#ifdef CONFIG_RT_MUTEXES
++	plist_head_init(&init_task.pi_waiters, &init_task.pi_lock);
++#endif
++
++	/*
++	 * The boot idle thread does lazy MMU switching as well:
++	 */
++	atomic_inc(&init_mm.mm_count);
++	enter_lazy_tlb(&init_mm, current);
++
++	/*
++	 * Make us the idle thread. Technically, schedule() should not be
++	 * called from this thread, however somewhere below it might be,
++	 * but because we are the idle thread, we just pick up running again
++	 * when this runqueue becomes "idle".
++	 */
++	init_idle(current, smp_processor_id());
++
++	/* Allocate the nohz_cpu_mask if CONFIG_CPUMASK_OFFSTACK */
++	alloc_cpumask_var(&nohz_cpu_mask, GFP_NOWAIT);
++#ifdef CONFIG_SMP
++#ifdef CONFIG_NO_HZ
++	alloc_cpumask_var(&nohz.cpu_mask, GFP_NOWAIT);
++	alloc_cpumask_var(&nohz.ilb_grp_nohz_mask, GFP_NOWAIT);
++#endif
++	alloc_cpumask_var(&cpu_isolated_map, GFP_NOWAIT);
++#endif /* SMP */
++	perf_counter_init();
++}
++
++#ifdef CONFIG_DEBUG_SPINLOCK_SLEEP
++void __might_sleep(char *file, int line)
++{
++#ifdef in_atomic
++	static unsigned long prev_jiffy;	/* ratelimiting */
++
++	if ((in_atomic() || irqs_disabled()) &&
++	    system_state == SYSTEM_RUNNING && !oops_in_progress) {
++		if (time_before(jiffies, prev_jiffy + HZ) && prev_jiffy)
++			return;
++		prev_jiffy = jiffies;
++		printk(KERN_ERR "BUG: sleeping function called from invalid"
++				" context at %s:%d\n", file, line);
++		printk("in_atomic():%d, irqs_disabled():%d\n",
++			in_atomic(), irqs_disabled());
++		debug_show_held_locks(current);
++		if (irqs_disabled())
++			print_irqtrace_events(current);
++		dump_stack();
++	}
++#endif
++}
++EXPORT_SYMBOL(__might_sleep);
++#endif
++
++#ifdef CONFIG_MAGIC_SYSRQ
++void normalize_rt_tasks(void)
++{
++	struct task_struct *g, *p;
++	unsigned long flags;
++	struct rq *rq;
++	int queued;
++
++	read_lock_irq(&tasklist_lock);
++
++	do_each_thread(g, p) {
++		if (!rt_task(p) && !iso_task(p))
++			continue;
++
++		spin_lock_irqsave(&p->pi_lock, flags);
++		rq = __task_grq_lock(p);
++		update_rq_clock(rq);
++
++		queued = task_queued_only(p);
++		if (queued)
++			dequeue_task(p);
++		__setscheduler(p, SCHED_NORMAL, 0);
++		if (task_running(p))
++			resched_task(p);
++		if (queued) {
++			enqueue_task(p);
++			try_preempt(p);
++		}
++
++		__task_grq_unlock();
++		spin_unlock_irqrestore(&p->pi_lock, flags);
++	} while_each_thread(g, p);
++
++	read_unlock_irq(&tasklist_lock);
++}
++#endif /* CONFIG_MAGIC_SYSRQ */
++
++#ifdef CONFIG_IA64
++/*
++ * These functions are only useful for the IA64 MCA handling.
++ *
++ * They can only be called when the whole system has been
++ * stopped - every CPU needs to be quiescent, and no scheduling
++ * activity can take place. Using them for anything else would
++ * be a serious bug, and as a result, they aren't even visible
++ * under any other configuration.
++ */
++
++/**
++ * curr_task - return the current task for a given cpu.
++ * @cpu: the processor in question.
++ *
++ * ONLY VALID WHEN THE WHOLE SYSTEM IS STOPPED!
++ */
++struct task_struct *curr_task(int cpu)
++{
++	return cpu_curr(cpu);
++}
++
++/**
++ * set_curr_task - set the current task for a given cpu.
++ * @cpu: the processor in question.
++ * @p: the task pointer to set.
++ *
++ * Description: This function must only be used when non-maskable interrupts
++ * are serviced on a separate stack.  It allows the architecture to switch the
++ * notion of the current task on a cpu in a non-blocking manner.  This function
++ * must be called with all CPU's synchronized, and interrupts disabled, the
++ * and caller must save the original value of the current task (see
++ * curr_task() above) and restore that value before reenabling interrupts and
++ * re-starting the system.
++ *
++ * ONLY VALID WHEN THE WHOLE SYSTEM IS STOPPED!
++ */
++void set_curr_task(int cpu, struct task_struct *p)
++{
++	cpu_curr(cpu) = p;
++}
++
++#endif
++
++/*
++ * Use precise platform statistics if available:
++ */
++#ifdef CONFIG_VIRT_CPU_ACCOUNTING
++cputime_t task_utime(struct task_struct *p)
++{
++	return p->utime;
++}
++
++cputime_t task_stime(struct task_struct *p)
++{
++	return p->stime;
++}
++#else
++cputime_t task_utime(struct task_struct *p)
++{
++	clock_t utime = cputime_to_clock_t(p->utime),
++		total = utime + cputime_to_clock_t(p->stime);
++	u64 temp;
++
++	temp = (u64)nsec_to_clock_t(p->se.sum_exec_runtime);
++
++	if (total) {
++		temp *= utime;
++		do_div(temp, total);
++	}
++	utime = (clock_t)temp;
++
++	p->prev_utime = max(p->prev_utime, clock_t_to_cputime(utime));
++	return p->prev_utime;
++}
++
++cputime_t task_stime(struct task_struct *p)
++{
++	clock_t stime;
++
++	stime = nsec_to_clock_t(p->se.sum_exec_runtime) -
++			cputime_to_clock_t(task_utime(p));
++
++	if (stime >= 0)
++		p->prev_stime = max(p->prev_stime, clock_t_to_cputime(stime));
++
++	return p->prev_stime;
++}
++#endif
++
++inline cputime_t task_gtime(struct task_struct *p)
++{
++	return p->gtime;
++}
++
++void __cpuinit init_idle_bootup_task(struct task_struct *idle)
++{}
++
++#ifdef CONFIG_SCHED_DEBUG
++void proc_sched_show_task(struct task_struct *p, struct seq_file *m)
++{}
++
++void proc_sched_set_task(struct task_struct *p)
++{}
++#endif
+--- a/kernel/sysctl.c
++++ b/kernel/sysctl.c
+@@ -86,6 +86,8 @@ extern int percpu_pagelist_fraction;
+ extern int compat_log;
+ extern int latencytop_enabled;
+ extern int sysctl_nr_open_min, sysctl_nr_open_max;
++extern int rr_interval;
++extern int sched_iso_cpu;
+ #ifndef CONFIG_MMU
+ extern int sysctl_nr_trim_pages;
+ #endif
+@@ -103,7 +105,8 @@ static int zero;
+ static int __maybe_unused one = 1;
+ static int __maybe_unused two = 2;
+ static unsigned long one_ul = 1;
+-static int one_hundred = 100;
++static int __read_mostly one_hundred = 100;
++static int __maybe_unused __read_mostly five_thousand = 5000;
+ 
+ /* this is needed for the proc_doulongvec_minmax of vm_dirty_bytes */
+ static unsigned long dirty_bytes_min = 2 * PAGE_SIZE;
+@@ -238,7 +241,7 @@ static struct ctl_table root_table[] = {
+ 	{ .ctl_name = 0 }
+ };
+ 
+-#ifdef CONFIG_SCHED_DEBUG
++#if defined(CONFIG_SCHED_DEBUG) && defined(CONFIG_SCHED_CFS)
+ static int min_sched_granularity_ns = 100000;		/* 100 usecs */
+ static int max_sched_granularity_ns = NSEC_PER_SEC;	/* 1 second */
+ static int min_wakeup_granularity_ns;			/* 0 usecs */
+@@ -246,7 +249,7 @@ static int max_wakeup_granularity_ns = N
+ #endif
+ 
+ static struct ctl_table kern_table[] = {
+-#ifdef CONFIG_SCHED_DEBUG
++#if defined(CONFIG_SCHED_DEBUG) && defined(CONFIG_SCHED_CFS)
+ 	{
+ 		.ctl_name	= CTL_UNNUMBERED,
+ 		.procname	= "sched_min_granularity_ns",
+@@ -342,6 +345,7 @@ static struct ctl_table kern_table[] = {
+ 		.extra2		= &one,
+ 	},
+ #endif
++#ifdef CONFIG_SCHED_CFS
+ 	{
+ 		.ctl_name	= CTL_UNNUMBERED,
+ 		.procname	= "sched_rt_period_us",
+@@ -366,6 +370,7 @@ static struct ctl_table kern_table[] = {
+ 		.mode		= 0644,
+ 		.proc_handler	= &proc_dointvec,
+ 	},
++#endif
+ #ifdef CONFIG_PROVE_LOCKING
+ 	{
+ 		.ctl_name	= CTL_UNNUMBERED,
+@@ -798,6 +803,30 @@ static struct ctl_table kern_table[] = {
+ 		.proc_handler	= &proc_dointvec,
+ 	},
+ #endif
++#ifdef CONFIG_SCHED_BFS
++	{
++		.ctl_name	= CTL_UNNUMBERED,
++		.procname	= "rr_interval",
++		.data		= &rr_interval,
++		.maxlen		= sizeof (int),
++		.mode		= 0644,
++		.proc_handler	= &proc_dointvec_minmax,
++		.strategy	= &sysctl_intvec,
++		.extra1		= &one,
++		.extra2		= &five_thousand,
++	},
++	{
++		.ctl_name	= CTL_UNNUMBERED,
++		.procname	= "iso_cpu",
++		.data		= &sched_iso_cpu,
++		.maxlen		= sizeof (int),
++		.mode		= 0644,
++		.proc_handler	= &proc_dointvec_minmax,
++		.strategy	= &sysctl_intvec,
++		.extra1		= &zero,
++		.extra2		= &one_hundred,
++	},
++#endif
+ #if defined(CONFIG_S390) && defined(CONFIG_SMP)
+ 	{
+ 		.ctl_name	= KERN_SPIN_RETRY,
+--- a/kernel/workqueue.c
++++ b/kernel/workqueue.c
+@@ -317,7 +317,9 @@ static int worker_thread(void *__cwq)
+ 	if (cwq->wq->freezeable)
+ 		set_freezable();
+ 
++#ifdef CONFIG_SCHED_CFS
+ 	set_user_nice(current, -5);
++#endif
+ 
+ 	for (;;) {
+ 		prepare_to_wait(&cwq->more_work, &wait, TASK_INTERRUPTIBLE);
diff --git a/target/linux/generic/patches-2.6.31/400-ledtrig_morse.patch b/target/linux/generic/patches-2.6.31/400-ledtrig_morse.patch
new file mode 100644
index 0000000000..9e3ddec03b
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/400-ledtrig_morse.patch
@@ -0,0 +1,18 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -297,4 +297,8 @@ config LEDS_TRIGGER_DEFAULT_ON
+ comment "iptables trigger is under Netfilter config (LED target)"
+ 	depends on LEDS_TRIGGERS
+ 
++config LEDS_TRIGGER_MORSE
++	tristate "LED Morse Trigger"
++	depends on LEDS_TRIGGERS
++
+ endif # NEW_LEDS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -39,3 +39,4 @@ obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT)	+=
+ obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT)	+= ledtrig-backlight.o
+ obj-$(CONFIG_LEDS_TRIGGER_GPIO)		+= ledtrig-gpio.o
+ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
++obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o
diff --git a/target/linux/generic/patches-2.6.31/402-ledtrig_netdev.patch b/target/linux/generic/patches-2.6.31/402-ledtrig_netdev.patch
new file mode 100644
index 0000000000..9f307004d2
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/402-ledtrig_netdev.patch
@@ -0,0 +1,21 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -301,4 +301,11 @@ config LEDS_TRIGGER_MORSE
+ 	tristate "LED Morse Trigger"
+ 	depends on LEDS_TRIGGERS
+ 
++config LEDS_TRIGGER_NETDEV
++	tristate "LED Netdev Trigger"
++	depends on NET && LEDS_TRIGGERS
++	help
++	  This allows LEDs to be controlled by network device activity.
++	  If unsure, say Y.
++
+ endif # NEW_LEDS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -40,3 +40,4 @@ obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT)	+=
+ obj-$(CONFIG_LEDS_TRIGGER_GPIO)		+= ledtrig-gpio.o
+ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
+ obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o
++obj-$(CONFIG_LEDS_TRIGGER_NETDEV)      += ledtrig-netdev.o
diff --git a/target/linux/generic/patches-2.6.31/410-gpio_buttons.patch b/target/linux/generic/patches-2.6.31/410-gpio_buttons.patch
new file mode 100644
index 0000000000..688f6fe10f
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/410-gpio_buttons.patch
@@ -0,0 +1,31 @@
+--- a/drivers/input/misc/Kconfig
++++ b/drivers/input/misc/Kconfig
+@@ -269,4 +269,21 @@ config INPUT_DM355EVM
+ 
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called dm355evm_keys.
++
++config INPUT_GPIO_BUTTONS
++	tristate "Polled GPIO buttons interface"
++	depends on GENERIC_GPIO
++	select INPUT_POLLDEV
++	help
++	  This driver implements support for buttons connected
++	  to GPIO pins of various CPUs (and some other chips).
++
++	  Say Y here if your device has buttons connected
++	  directly to such GPIO pins.  Your board-specific
++	  setup logic must also provide a platform device,
++	  with configuration data saying which GPIOs are used.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called gpio-buttons.
++
+ endif
+--- a/drivers/input/misc/Makefile
++++ b/drivers/input/misc/Makefile
+@@ -26,3 +26,4 @@ obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON)	+=
+ obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
+ obj-$(CONFIG_INPUT_WISTRON_BTNS)	+= wistron_btns.o
+ obj-$(CONFIG_INPUT_YEALINK)		+= yealink.o
++obj-$(CONFIG_INPUT_GPIO_BUTTONS)	+= gpio_buttons.o
diff --git a/target/linux/generic/patches-2.6.31/420-gpiodev.patch b/target/linux/generic/patches-2.6.31/420-gpiodev.patch
new file mode 100644
index 0000000000..5a364d69ad
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/420-gpiodev.patch
@@ -0,0 +1,27 @@
+--- a/drivers/char/Kconfig
++++ b/drivers/char/Kconfig
+@@ -1029,6 +1029,14 @@ config CS5535_GPIO
+ 
+ 	  If compiled as a module, it will be called cs5535_gpio.
+ 
++config GPIO_DEVICE
++	tristate "GPIO device support"
++	depends on GENERIC_GPIO
++	help
++	  Say Y to enable Linux GPIO device support.  This allows control of
++	  GPIO pins using a character device
++
++
+ config RAW_DRIVER
+ 	tristate "RAW driver (/dev/raw/rawN)"
+ 	depends on BLOCK
+--- a/drivers/char/Makefile
++++ b/drivers/char/Makefile
+@@ -95,6 +95,7 @@ obj-$(CONFIG_SCx200_GPIO)	+= scx200_gpio
+ obj-$(CONFIG_PC8736x_GPIO)	+= pc8736x_gpio.o
+ obj-$(CONFIG_NSC_GPIO)		+= nsc_gpio.o
+ obj-$(CONFIG_CS5535_GPIO)	+= cs5535_gpio.o
++obj-$(CONFIG_GPIO_DEVICE)	+= gpio_dev.o
+ obj-$(CONFIG_GPIO_TB0219)	+= tb0219.o
+ obj-$(CONFIG_TELCLOCK)		+= tlclk.o
+ 
diff --git a/target/linux/generic/patches-2.6.31/430-scsi_header_fix.patch b/target/linux/generic/patches-2.6.31/430-scsi_header_fix.patch
new file mode 100644
index 0000000000..575bec92d7
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/430-scsi_header_fix.patch
@@ -0,0 +1,17 @@
+--- a/include/scsi/scsi.h
++++ b/include/scsi/scsi.h
+@@ -142,10 +142,10 @@ struct scsi_cmnd;
+ 
+ /* defined in T10 SCSI Primary Commands-2 (SPC2) */
+ struct scsi_varlen_cdb_hdr {
+-	u8 opcode;        /* opcode always == VARIABLE_LENGTH_CMD */
+-	u8 control;
+-	u8 misc[5];
+-	u8 additional_cdb_length;         /* total cdb length - 8 */
++	__u8 opcode;        /* opcode always == VARIABLE_LENGTH_CMD */
++	__u8 control;
++	__u8 misc[5];
++	__u8 additional_cdb_length;         /* total cdb length - 8 */
+ 	__be16 service_action;
+ 	/* service specific data follows */
+ };
diff --git a/target/linux/generic/patches-2.6.31/510-yaffs_support.patch b/target/linux/generic/patches-2.6.31/510-yaffs_support.patch
new file mode 100644
index 0000000000..08a1efc29c
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/510-yaffs_support.patch
@@ -0,0 +1,17 @@
+--- a/fs/Kconfig
++++ b/fs/Kconfig
+@@ -188,6 +188,7 @@ source "fs/sysv/Kconfig"
+ source "fs/ufs/Kconfig"
+ source "fs/exofs/Kconfig"
+ source "fs/nilfs2/Kconfig"
++source "fs/yaffs2/Kconfig"
+ 
+ endif # MISC_FILESYSTEMS
+ 
+--- a/fs/Makefile
++++ b/fs/Makefile
+@@ -125,3 +125,4 @@ obj-$(CONFIG_OCFS2_FS)		+= ocfs2/
+ obj-$(CONFIG_BTRFS_FS)		+= btrfs/
+ obj-$(CONFIG_GFS2_FS)           += gfs2/
+ obj-$(CONFIG_EXOFS_FS)          += exofs/
++obj-$(CONFIG_YAFFS_FS)		+= yaffs2/
diff --git a/target/linux/generic/patches-2.6.31/511-yaffs-cvs-2009-04-24.patch b/target/linux/generic/patches-2.6.31/511-yaffs-cvs-2009-04-24.patch
new file mode 100644
index 0000000000..c334b17d08
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/511-yaffs-cvs-2009-04-24.patch
@@ -0,0 +1,12344 @@
+--- a/fs/yaffs2/devextras.h
++++ b/fs/yaffs2/devextras.h
+@@ -14,194 +14,135 @@
+  */
+ 
+ /*
+- * This file is just holds extra declarations used during development.
+- * Most of these are from kernel includes placed here so we can use them in
+- * applications.
++ * This file is just holds extra declarations of macros that would normally
++ * be providesd in the Linux kernel. These macros have been written from
++ * scratch but are functionally equivalent to the Linux ones.
+  *
+  */
+ 
+ #ifndef __EXTRAS_H__
+ #define __EXTRAS_H__
+ 
+-#if defined WIN32
+-#define __inline__ __inline
+-#define new newHack
+-#endif
+-
+-#if !(defined __KERNEL__) || (defined WIN32)
+ 
+-/* User space defines */
++#if !(defined __KERNEL__)
+ 
++/* Definition of types */
+ typedef unsigned char __u8;
+ typedef unsigned short __u16;
+ typedef unsigned __u32;
+ 
++#endif
++
+ /*
+- * Simple doubly linked list implementation.
+- *
+- * Some of the internal functions ("__xxx") are useful when
+- * manipulating whole lists rather than single entries, as
+- * sometimes we already know the next/prev entries and we can
+- * generate better code by using them directly rather than
+- * using the generic single-entry routines.
++ * This is a simple doubly linked list implementation that matches the
++ * way the Linux kernel doubly linked list implementation works.
+  */
+ 
+-#define prefetch(x) 1
+-
+-struct list_head {
+-	struct list_head *next, *prev;
++struct ylist_head {
++	struct ylist_head *next; /* next in chain */
++	struct ylist_head *prev; /* previous in chain */
+ };
+ 
+-#define LIST_HEAD_INIT(name) { &(name), &(name) }
+ 
+-#define LIST_HEAD(name) \
+-	struct list_head name = LIST_HEAD_INIT(name)
++/* Initialise a static list */
++#define YLIST_HEAD(name) \
++struct ylist_head name = { &(name), &(name)}
++
+ 
+-#define INIT_LIST_HEAD(ptr) do { \
+-	(ptr)->next = (ptr); (ptr)->prev = (ptr); \
++
++/* Initialise a list head to an empty list */
++#define YINIT_LIST_HEAD(p) \
++do { \
++	(p)->next = (p);\
++	(p)->prev = (p); \
+ } while (0)
+ 
+-/*
+- * Insert a new entry between two known consecutive entries.
+- *
+- * This is only for internal list manipulation where we know
+- * the prev/next entries already!
+- */
+-static __inline__ void __list_add(struct list_head *new,
+-				  struct list_head *prev,
+-				  struct list_head *next)
+-{
+-	next->prev = new;
+-	new->next = next;
+-	new->prev = prev;
+-	prev->next = new;
+-}
+ 
+-/**
+- * list_add - add a new entry
+- * @new: new entry to be added
+- * @head: list head to add it after
+- *
+- * Insert a new entry after the specified head.
+- * This is good for implementing stacks.
+- */
+-static __inline__ void list_add(struct list_head *new, struct list_head *head)
++/* Add an element to a list */
++static __inline__ void ylist_add(struct ylist_head *newEntry,
++				struct ylist_head *list)
+ {
+-	__list_add(new, head, head->next);
+-}
++	struct ylist_head *listNext = list->next;
++
++	list->next = newEntry;
++	newEntry->prev = list;
++	newEntry->next = listNext;
++	listNext->prev = newEntry;
+ 
+-/**
+- * list_add_tail - add a new entry
+- * @new: new entry to be added
+- * @head: list head to add it before
+- *
+- * Insert a new entry before the specified head.
+- * This is useful for implementing queues.
+- */
+-static __inline__ void list_add_tail(struct list_head *new,
+-				     struct list_head *head)
+-{
+-	__list_add(new, head->prev, head);
+ }
+ 
+-/*
+- * Delete a list entry by making the prev/next entries
+- * point to each other.
+- *
+- * This is only for internal list manipulation where we know
+- * the prev/next entries already!
+- */
+-static __inline__ void __list_del(struct list_head *prev,
+-				  struct list_head *next)
++static __inline__ void ylist_add_tail(struct ylist_head *newEntry,
++				 struct ylist_head *list)
+ {
+-	next->prev = prev;
+-	prev->next = next;
++	struct ylist_head *listPrev = list->prev;
++
++	list->prev = newEntry;
++	newEntry->next = list;
++	newEntry->prev = listPrev;
++	listPrev->next = newEntry;
++
+ }
+ 
+-/**
+- * list_del - deletes entry from list.
+- * @entry: the element to delete from the list.
+- * Note: list_empty on entry does not return true after this, the entry is
+- * in an undefined state.
+- */
+-static __inline__ void list_del(struct list_head *entry)
++
++/* Take an element out of its current list, with or without
++ * reinitialising the links.of the entry*/
++static __inline__ void ylist_del(struct ylist_head *entry)
+ {
+-	__list_del(entry->prev, entry->next);
++	struct ylist_head *listNext = entry->next;
++	struct ylist_head *listPrev = entry->prev;
++
++	listNext->prev = listPrev;
++	listPrev->next = listNext;
++
+ }
+ 
+-/**
+- * list_del_init - deletes entry from list and reinitialize it.
+- * @entry: the element to delete from the list.
+- */
+-static __inline__ void list_del_init(struct list_head *entry)
++static __inline__ void ylist_del_init(struct ylist_head *entry)
+ {
+-	__list_del(entry->prev, entry->next);
+-	INIT_LIST_HEAD(entry);
++	ylist_del(entry);
++	entry->next = entry->prev = entry;
+ }
+ 
+-/**
+- * list_empty - tests whether a list is empty
+- * @head: the list to test.
+- */
+-static __inline__ int list_empty(struct list_head *head)
++
++/* Test if the list is empty */
++static __inline__ int ylist_empty(struct ylist_head *entry)
+ {
+-	return head->next == head;
++	return (entry->next == entry);
+ }
+ 
+-/**
+- * list_splice - join two lists
+- * @list: the new list to add.
+- * @head: the place to add it in the first list.
++
++/* ylist_entry takes a pointer to a list entry and offsets it to that
++ * we can find a pointer to the object it is embedded in.
+  */
+-static __inline__ void list_splice(struct list_head *list,
+-				   struct list_head *head)
+-{
+-	struct list_head *first = list->next;
+ 
+-	if (first != list) {
+-		struct list_head *last = list->prev;
+-		struct list_head *at = head->next;
+-
+-		first->prev = head;
+-		head->next = first;
+-
+-		last->next = at;
+-		at->prev = last;
+-	}
+-}
+ 
+-/**
+- * list_entry - get the struct for this entry
+- * @ptr:	the &struct list_head pointer.
+- * @type:	the type of the struct this is embedded in.
+- * @member:	the name of the list_struct within the struct.
+- */
+-#define list_entry(ptr, type, member) \
+-	((type *)((char *)(ptr)-(unsigned long)(&((type *)0)->member)))
+-
+-/**
+- * list_for_each	-	iterate over a list
+- * @pos:	the &struct list_head to use as a loop counter.
+- * @head:	the head for your list.
+- */
+-#define list_for_each(pos, head) \
+-	for (pos = (head)->next, prefetch(pos->next); pos != (head); \
+-        	pos = pos->next, prefetch(pos->next))
+-
+-/**
+- * list_for_each_safe	-	iterate over a list safe against removal
+- *                              of list entry
+- * @pos:	the &struct list_head to use as a loop counter.
+- * @n:		another &struct list_head to use as temporary storage
+- * @head:	the head for your list.
+- */
+-#define list_for_each_safe(pos, n, head) \
+-	for (pos = (head)->next, n = pos->next; pos != (head); \
+-		pos = n, n = pos->next)
++#define ylist_entry(entry, type, member) \
++	((type *)((char *)(entry)-(unsigned long)(&((type *)NULL)->member)))
+ 
+-/*
+- * File types
++
++/* ylist_for_each and list_for_each_safe  iterate over lists.
++ * ylist_for_each_safe uses temporary storage to make the list delete safe
+  */
++
++#define ylist_for_each(itervar, list) \
++	for (itervar = (list)->next; itervar != (list); itervar = itervar->next)
++
++#define ylist_for_each_safe(itervar, saveVar, list) \
++	for (itervar = (list)->next, saveVar = (list)->next->next; \
++		itervar != (list); itervar = saveVar, saveVar = saveVar->next)
++
++
++#if !(defined __KERNEL__)
++
++
++#ifndef WIN32
++#include <sys/stat.h>
++#endif
++
++
++#ifdef CONFIG_YAFFS_PROVIDE_DEFS
++/* File types */
++
++
+ #define DT_UNKNOWN	0
+ #define DT_FIFO		1
+ #define DT_CHR		2
+@@ -212,6 +153,7 @@ static __inline__ void list_splice(struc
+ #define DT_SOCK		12
+ #define DT_WHT		14
+ 
++
+ #ifndef WIN32
+ #include <sys/stat.h>
+ #endif
+@@ -227,10 +169,6 @@ static __inline__ void list_splice(struc
+ #define ATTR_ATIME	16
+ #define ATTR_MTIME	32
+ #define ATTR_CTIME	64
+-#define ATTR_ATIME_SET	128
+-#define ATTR_MTIME_SET	256
+-#define ATTR_FORCE	512	/* Not a change, but a change it */
+-#define ATTR_ATTR_FLAG	1024
+ 
+ struct iattr {
+ 	unsigned int ia_valid;
+@@ -244,21 +182,15 @@ struct iattr {
+ 	unsigned int ia_attr_flags;
+ };
+ 
+-#define KERN_DEBUG
++#endif
+ 
+ #else
+ 
+-#ifndef WIN32
+ #include <linux/types.h>
+-#include <linux/list.h>
+ #include <linux/fs.h>
+ #include <linux/stat.h>
+-#endif
+ 
+ #endif
+ 
+-#if defined WIN32
+-#undef new
+-#endif
+ 
+ #endif
+--- a/fs/yaffs2/Kconfig
++++ b/fs/yaffs2/Kconfig
+@@ -5,7 +5,7 @@
+ config YAFFS_FS
+ 	tristate "YAFFS2 file system support"
+ 	default n
+-	depends on MTD
++	depends on MTD_BLOCK
+ 	select YAFFS_YAFFS1
+ 	select YAFFS_YAFFS2
+ 	help
+@@ -43,7 +43,8 @@ config YAFFS_9BYTE_TAGS
+ 	  format that you need to continue to support.  New data written
+ 	  also uses the older-style format.  Note: Use of this option
+ 	  generally requires that MTD's oob layout be adjusted to use the
+-	  older-style format.  See notes on tags formats and MTD versions.
++	  older-style format.  See notes on tags formats and MTD versions
++	  in yaffs_mtdif1.c.
+ 
+ 	  If unsure, say N.
+ 
+@@ -109,26 +110,6 @@ config YAFFS_DISABLE_LAZY_LOAD
+ 
+ 	  If unsure, say N.
+ 
+-config YAFFS_CHECKPOINT_RESERVED_BLOCKS
+-	int "Reserved blocks for checkpointing"
+-	depends on YAFFS_YAFFS2
+-	default 10
+-	help
+-          Give the number of Blocks to reserve for checkpointing.
+-	  Checkpointing saves the state at unmount so that mounting is
+-	  much faster as a scan of all the flash to regenerate this state
+-	  is not needed.  These Blocks are reserved per partition, so if
+-	  you have very small partitions the default (10) may be a mess
+-	  for you.  You can set this value to 0, but that does not mean
+-	  checkpointing is disabled at all. There only won't be any
+-	  specially reserved blocks for checkpointing, so if there is
+-	  enough free space on the filesystem, it will be used for
+-	  checkpointing.
+-
+-	  If unsure, leave at default (10), but don't wonder if there are
+-	  always 2MB used on your large page device partition (10 x 2k
+-	  pagesize). When using small partitions or when being very small
+-	  on space, you probably want to set this to zero.
+ 
+ config YAFFS_DISABLE_WIDE_TNODES
+ 	bool "Turn off wide tnodes"
+--- a/fs/yaffs2/Makefile
++++ b/fs/yaffs2/Makefile
+@@ -5,7 +5,6 @@
+ obj-$(CONFIG_YAFFS_FS) += yaffs.o
+ 
+ yaffs-y := yaffs_ecc.o yaffs_fs.o yaffs_guts.o yaffs_checkptrw.o
+-yaffs-y += yaffs_packedtags2.o yaffs_nand.o yaffs_qsort.o
++yaffs-y += yaffs_packedtags1.o yaffs_packedtags2.o yaffs_nand.o yaffs_qsort.o
+ yaffs-y += yaffs_tagscompat.o yaffs_tagsvalidity.o
+-yaffs-y += yaffs_mtdif1.o yaffs_packedtags1.o
+-yaffs-y += yaffs_mtdif.o yaffs_mtdif2.o
++yaffs-y += yaffs_mtdif.o yaffs_mtdif1.o yaffs_mtdif2.o
+--- a/fs/yaffs2/moduleconfig.h
++++ b/fs/yaffs2/moduleconfig.h
+@@ -27,12 +27,12 @@
+ 
+ /* Default: Not selected */
+ /* Meaning: Yaffs does its own ECC, rather than using MTD ECC */
+-//#define CONFIG_YAFFS_DOES_ECC
++/* #define CONFIG_YAFFS_DOES_ECC */
+ 
+ /* Default: Not selected */
+ /* Meaning: ECC byte order is 'wrong'.  Only meaningful if */
+ /*          CONFIG_YAFFS_DOES_ECC is set */
+-//#define CONFIG_YAFFS_ECC_WRONG_ORDER
++/* #define CONFIG_YAFFS_ECC_WRONG_ORDER */
+ 
+ /* Default: Selected */
+ /* Meaning: Disables testing whether chunks are erased before writing to them*/
+@@ -54,11 +54,11 @@ that you need to continue to support.  N
+ older-style format.
+ Note: Use of this option generally requires that MTD's oob layout be
+ adjusted to use the older-style format.  See notes on tags formats and
+-MTD versions.
++MTD versions in yaffs_mtdif1.c.
+ */
+ /* Default: Not selected */
+ /* Meaning: Use older-style on-NAND data format with pageStatus byte */
+-#define CONFIG_YAFFS_9BYTE_TAGS
++/* #define CONFIG_YAFFS_9BYTE_TAGS */
+ 
+ #endif /* YAFFS_OUT_OF_TREE */
+ 
+--- a/fs/yaffs2/yaffs_checkptrw.c
++++ b/fs/yaffs2/yaffs_checkptrw.c
+@@ -12,48 +12,43 @@
+  */
+ 
+ const char *yaffs_checkptrw_c_version =
+-    "$Id: yaffs_checkptrw.c,v 1.14 2007-05-15 20:07:40 charles Exp $";
++	"$Id: yaffs_checkptrw.c,v 1.18 2009-03-06 17:20:49 wookey Exp $";
+ 
+ 
+ #include "yaffs_checkptrw.h"
+-
++#include "yaffs_getblockinfo.h"
+ 
+ static int yaffs_CheckpointSpaceOk(yaffs_Device *dev)
+ {
+-
+ 	int blocksAvailable = dev->nErasedBlocks - dev->nReservedBlocks;
+ 
+ 	T(YAFFS_TRACE_CHECKPOINT,
+ 		(TSTR("checkpt blocks available = %d" TENDSTR),
+ 		blocksAvailable));
+ 
+-
+ 	return (blocksAvailable <= 0) ? 0 : 1;
+ }
+ 
+ 
+ static int yaffs_CheckpointErase(yaffs_Device *dev)
+ {
+-
+ 	int i;
+ 
+-
+-	if(!dev->eraseBlockInNAND)
++	if (!dev->eraseBlockInNAND)
+ 		return 0;
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("checking blocks %d to %d"TENDSTR),
+-		dev->internalStartBlock,dev->internalEndBlock));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("checking blocks %d to %d"TENDSTR),
++		dev->internalStartBlock, dev->internalEndBlock));
+ 
+-	for(i = dev->internalStartBlock; i <= dev->internalEndBlock; i++) {
+-		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,i);
+-		if(bi->blockState == YAFFS_BLOCK_STATE_CHECKPOINT){
+-			T(YAFFS_TRACE_CHECKPOINT,(TSTR("erasing checkpt block %d"TENDSTR),i));
+-			if(dev->eraseBlockInNAND(dev,i- dev->blockOffset /* realign */)){
++	for (i = dev->internalStartBlock; i <= dev->internalEndBlock; i++) {
++		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, i);
++		if (bi->blockState == YAFFS_BLOCK_STATE_CHECKPOINT) {
++			T(YAFFS_TRACE_CHECKPOINT, (TSTR("erasing checkpt block %d"TENDSTR), i));
++			if (dev->eraseBlockInNAND(dev, i - dev->blockOffset /* realign */)) {
+ 				bi->blockState = YAFFS_BLOCK_STATE_EMPTY;
+ 				dev->nErasedBlocks++;
+ 				dev->nFreeChunks += dev->nChunksPerBlock;
+-			}
+-			else {
+-				dev->markNANDBlockBad(dev,i);
++			} else {
++				dev->markNANDBlockBad(dev, i);
+ 				bi->blockState = YAFFS_BLOCK_STATE_DEAD;
+ 			}
+ 		}
+@@ -71,23 +66,23 @@ static void yaffs_CheckpointFindNextEras
+ 	int blocksAvailable = dev->nErasedBlocks - dev->nReservedBlocks;
+ 	T(YAFFS_TRACE_CHECKPOINT,
+ 		(TSTR("allocating checkpt block: erased %d reserved %d avail %d next %d "TENDSTR),
+-		dev->nErasedBlocks,dev->nReservedBlocks,blocksAvailable,dev->checkpointNextBlock));
++		dev->nErasedBlocks, dev->nReservedBlocks, blocksAvailable, dev->checkpointNextBlock));
+ 
+-	if(dev->checkpointNextBlock >= 0 &&
+-	   dev->checkpointNextBlock <= dev->internalEndBlock &&
+-	   blocksAvailable > 0){
+-
+-		for(i = dev->checkpointNextBlock; i <= dev->internalEndBlock; i++){
+-			yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,i);
+-			if(bi->blockState == YAFFS_BLOCK_STATE_EMPTY){
++	if (dev->checkpointNextBlock >= 0 &&
++			dev->checkpointNextBlock <= dev->internalEndBlock &&
++			blocksAvailable > 0) {
++
++		for (i = dev->checkpointNextBlock; i <= dev->internalEndBlock; i++) {
++			yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, i);
++			if (bi->blockState == YAFFS_BLOCK_STATE_EMPTY) {
+ 				dev->checkpointNextBlock = i + 1;
+ 				dev->checkpointCurrentBlock = i;
+-				T(YAFFS_TRACE_CHECKPOINT,(TSTR("allocating checkpt block %d"TENDSTR),i));
++				T(YAFFS_TRACE_CHECKPOINT, (TSTR("allocating checkpt block %d"TENDSTR), i));
+ 				return;
+ 			}
+ 		}
+ 	}
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("out of checkpt blocks"TENDSTR)));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("out of checkpt blocks"TENDSTR)));
+ 
+ 	dev->checkpointNextBlock = -1;
+ 	dev->checkpointCurrentBlock = -1;
+@@ -98,30 +93,31 @@ static void yaffs_CheckpointFindNextChec
+ 	int  i;
+ 	yaffs_ExtendedTags tags;
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("find next checkpt block: start:  blocks %d next %d" TENDSTR),
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("find next checkpt block: start:  blocks %d next %d" TENDSTR),
+ 		dev->blocksInCheckpoint, dev->checkpointNextBlock));
+ 
+-	if(dev->blocksInCheckpoint < dev->checkpointMaxBlocks)
+-		for(i = dev->checkpointNextBlock; i <= dev->internalEndBlock; i++){
++	if (dev->blocksInCheckpoint < dev->checkpointMaxBlocks)
++		for (i = dev->checkpointNextBlock; i <= dev->internalEndBlock; i++) {
+ 			int chunk = i * dev->nChunksPerBlock;
+ 			int realignedChunk = chunk - dev->chunkOffset;
+ 
+-			dev->readChunkWithTagsFromNAND(dev,realignedChunk,NULL,&tags);
+-			T(YAFFS_TRACE_CHECKPOINT,(TSTR("find next checkpt block: search: block %d oid %d seq %d eccr %d" TENDSTR),
+-				i, tags.objectId,tags.sequenceNumber,tags.eccResult));
++			dev->readChunkWithTagsFromNAND(dev, realignedChunk,
++					NULL, &tags);
++			T(YAFFS_TRACE_CHECKPOINT, (TSTR("find next checkpt block: search: block %d oid %d seq %d eccr %d" TENDSTR),
++				i, tags.objectId, tags.sequenceNumber, tags.eccResult));
+ 
+-			if(tags.sequenceNumber == YAFFS_SEQUENCE_CHECKPOINT_DATA){
++			if (tags.sequenceNumber == YAFFS_SEQUENCE_CHECKPOINT_DATA) {
+ 				/* Right kind of block */
+ 				dev->checkpointNextBlock = tags.objectId;
+ 				dev->checkpointCurrentBlock = i;
+ 				dev->checkpointBlockList[dev->blocksInCheckpoint] = i;
+ 				dev->blocksInCheckpoint++;
+-				T(YAFFS_TRACE_CHECKPOINT,(TSTR("found checkpt block %d"TENDSTR),i));
++				T(YAFFS_TRACE_CHECKPOINT, (TSTR("found checkpt block %d"TENDSTR), i));
+ 				return;
+ 			}
+ 		}
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("found no more checkpt blocks"TENDSTR)));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("found no more checkpt blocks"TENDSTR)));
+ 
+ 	dev->checkpointNextBlock = -1;
+ 	dev->checkpointCurrentBlock = -1;
+@@ -133,17 +129,17 @@ int yaffs_CheckpointOpen(yaffs_Device *d
+ 
+ 	/* Got the functions we need? */
+ 	if (!dev->writeChunkWithTagsToNAND ||
+-	    !dev->readChunkWithTagsFromNAND ||
+-	    !dev->eraseBlockInNAND ||
+-	    !dev->markNANDBlockBad)
++			!dev->readChunkWithTagsFromNAND ||
++			!dev->eraseBlockInNAND ||
++			!dev->markNANDBlockBad)
+ 		return 0;
+ 
+-	if(forWriting && !yaffs_CheckpointSpaceOk(dev))
++	if (forWriting && !yaffs_CheckpointSpaceOk(dev))
+ 		return 0;
+ 
+-	if(!dev->checkpointBuffer)
+-		dev->checkpointBuffer = YMALLOC_DMA(dev->nDataBytesPerChunk);
+-	if(!dev->checkpointBuffer)
++	if (!dev->checkpointBuffer)
++		dev->checkpointBuffer = YMALLOC_DMA(dev->totalBytesPerChunk);
++	if (!dev->checkpointBuffer)
+ 		return 0;
+ 
+ 
+@@ -159,12 +155,10 @@ int yaffs_CheckpointOpen(yaffs_Device *d
+ 	dev->checkpointNextBlock = dev->internalStartBlock;
+ 
+ 	/* Erase all the blocks in the checkpoint area */
+-	if(forWriting){
+-		memset(dev->checkpointBuffer,0,dev->nDataBytesPerChunk);
++	if (forWriting) {
++		memset(dev->checkpointBuffer, 0, dev->nDataBytesPerChunk);
+ 		dev->checkpointByteOffset = 0;
+ 		return yaffs_CheckpointErase(dev);
+-
+-
+ 	} else {
+ 		int i;
+ 		/* Set to a value that will kick off a read */
+@@ -174,7 +168,7 @@ int yaffs_CheckpointOpen(yaffs_Device *d
+ 		dev->blocksInCheckpoint = 0;
+ 		dev->checkpointMaxBlocks = (dev->internalEndBlock - dev->internalStartBlock)/16 + 2;
+ 		dev->checkpointBlockList = YMALLOC(sizeof(int) * dev->checkpointMaxBlocks);
+-		for(i = 0; i < dev->checkpointMaxBlocks; i++)
++		for (i = 0; i < dev->checkpointMaxBlocks; i++)
+ 			dev->checkpointBlockList[i] = -1;
+ 	}
+ 
+@@ -191,18 +185,17 @@ int yaffs_GetCheckpointSum(yaffs_Device
+ 
+ static int yaffs_CheckpointFlushBuffer(yaffs_Device *dev)
+ {
+-
+ 	int chunk;
+ 	int realignedChunk;
+ 
+ 	yaffs_ExtendedTags tags;
+ 
+-	if(dev->checkpointCurrentBlock < 0){
++	if (dev->checkpointCurrentBlock < 0) {
+ 		yaffs_CheckpointFindNextErasedBlock(dev);
+ 		dev->checkpointCurrentChunk = 0;
+ 	}
+ 
+-	if(dev->checkpointCurrentBlock < 0)
++	if (dev->checkpointCurrentBlock < 0)
+ 		return 0;
+ 
+ 	tags.chunkDeleted = 0;
+@@ -210,10 +203,10 @@ static int yaffs_CheckpointFlushBuffer(y
+ 	tags.chunkId = dev->checkpointPageSequence + 1;
+ 	tags.sequenceNumber =  YAFFS_SEQUENCE_CHECKPOINT_DATA;
+ 	tags.byteCount = dev->nDataBytesPerChunk;
+-	if(dev->checkpointCurrentChunk == 0){
++	if (dev->checkpointCurrentChunk == 0) {
+ 		/* First chunk we write for the block? Set block state to
+ 		   checkpoint */
+-		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,dev->checkpointCurrentBlock);
++		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, dev->checkpointCurrentBlock);
+ 		bi->blockState = YAFFS_BLOCK_STATE_CHECKPOINT;
+ 		dev->blocksInCheckpoint++;
+ 	}
+@@ -221,28 +214,29 @@ static int yaffs_CheckpointFlushBuffer(y
+ 	chunk = dev->checkpointCurrentBlock * dev->nChunksPerBlock + dev->checkpointCurrentChunk;
+ 
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("checkpoint wite buffer nand %d(%d:%d) objid %d chId %d" TENDSTR),
+-		chunk, dev->checkpointCurrentBlock, dev->checkpointCurrentChunk,tags.objectId,tags.chunkId));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("checkpoint wite buffer nand %d(%d:%d) objid %d chId %d" TENDSTR),
++		chunk, dev->checkpointCurrentBlock, dev->checkpointCurrentChunk, tags.objectId, tags.chunkId));
+ 
+ 	realignedChunk = chunk - dev->chunkOffset;
+ 
+-	dev->writeChunkWithTagsToNAND(dev,realignedChunk,dev->checkpointBuffer,&tags);
++	dev->writeChunkWithTagsToNAND(dev, realignedChunk,
++			dev->checkpointBuffer, &tags);
+ 	dev->checkpointByteOffset = 0;
+ 	dev->checkpointPageSequence++;
+ 	dev->checkpointCurrentChunk++;
+-	if(dev->checkpointCurrentChunk >= dev->nChunksPerBlock){
++	if (dev->checkpointCurrentChunk >= dev->nChunksPerBlock) {
+ 		dev->checkpointCurrentChunk = 0;
+ 		dev->checkpointCurrentBlock = -1;
+ 	}
+-	memset(dev->checkpointBuffer,0,dev->nDataBytesPerChunk);
++	memset(dev->checkpointBuffer, 0, dev->nDataBytesPerChunk);
+ 
+ 	return 1;
+ }
+ 
+ 
+-int yaffs_CheckpointWrite(yaffs_Device *dev,const void *data, int nBytes)
++int yaffs_CheckpointWrite(yaffs_Device *dev, const void *data, int nBytes)
+ {
+-	int i=0;
++	int i = 0;
+ 	int ok = 1;
+ 
+ 
+@@ -250,17 +244,14 @@ int yaffs_CheckpointWrite(yaffs_Device *
+ 
+ 
+ 
+-	if(!dev->checkpointBuffer)
++	if (!dev->checkpointBuffer)
+ 		return 0;
+ 
+-	if(!dev->checkpointOpenForWrite)
++	if (!dev->checkpointOpenForWrite)
+ 		return -1;
+ 
+-	while(i < nBytes && ok) {
+-
+-
+-
+-		dev->checkpointBuffer[dev->checkpointByteOffset] = *dataBytes ;
++	while (i < nBytes && ok) {
++		dev->checkpointBuffer[dev->checkpointByteOffset] = *dataBytes;
+ 		dev->checkpointSum += *dataBytes;
+ 		dev->checkpointXor ^= *dataBytes;
+ 
+@@ -270,18 +261,17 @@ int yaffs_CheckpointWrite(yaffs_Device *
+ 		dev->checkpointByteCount++;
+ 
+ 
+-		if(dev->checkpointByteOffset < 0 ||
++		if (dev->checkpointByteOffset < 0 ||
+ 		   dev->checkpointByteOffset >= dev->nDataBytesPerChunk)
+ 			ok = yaffs_CheckpointFlushBuffer(dev);
+-
+ 	}
+ 
+-	return 	i;
++	return i;
+ }
+ 
+ int yaffs_CheckpointRead(yaffs_Device *dev, void *data, int nBytes)
+ {
+-	int i=0;
++	int i = 0;
+ 	int ok = 1;
+ 	yaffs_ExtendedTags tags;
+ 
+@@ -291,52 +281,54 @@ int yaffs_CheckpointRead(yaffs_Device *d
+ 
+ 	__u8 *dataBytes = (__u8 *)data;
+ 
+-	if(!dev->checkpointBuffer)
++	if (!dev->checkpointBuffer)
+ 		return 0;
+ 
+-	if(dev->checkpointOpenForWrite)
++	if (dev->checkpointOpenForWrite)
+ 		return -1;
+ 
+-	while(i < nBytes && ok) {
++	while (i < nBytes && ok) {
+ 
+ 
+-		if(dev->checkpointByteOffset < 0 ||
+-		   dev->checkpointByteOffset >= dev->nDataBytesPerChunk) {
++		if (dev->checkpointByteOffset < 0 ||
++			dev->checkpointByteOffset >= dev->nDataBytesPerChunk) {
+ 
+-		   	if(dev->checkpointCurrentBlock < 0){
++			if (dev->checkpointCurrentBlock < 0) {
+ 				yaffs_CheckpointFindNextCheckpointBlock(dev);
+ 				dev->checkpointCurrentChunk = 0;
+ 			}
+ 
+-			if(dev->checkpointCurrentBlock < 0)
++			if (dev->checkpointCurrentBlock < 0)
+ 				ok = 0;
+ 			else {
+-
+-				chunk = dev->checkpointCurrentBlock * dev->nChunksPerBlock +
+-				          dev->checkpointCurrentChunk;
++				chunk = dev->checkpointCurrentBlock *
++					dev->nChunksPerBlock +
++					dev->checkpointCurrentChunk;
+ 
+ 				realignedChunk = chunk - dev->chunkOffset;
+ 
+-	   			/* read in the next chunk */
+-	   			/* printf("read checkpoint page %d\n",dev->checkpointPage); */
+-				dev->readChunkWithTagsFromNAND(dev, realignedChunk,
+-							       dev->checkpointBuffer,
+-							      &tags);
+-
+-				if(tags.chunkId != (dev->checkpointPageSequence + 1) ||
+-				   tags.sequenceNumber != YAFFS_SEQUENCE_CHECKPOINT_DATA)
+-				   ok = 0;
++				/* read in the next chunk */
++				/* printf("read checkpoint page %d\n",dev->checkpointPage); */
++				dev->readChunkWithTagsFromNAND(dev,
++						realignedChunk,
++						dev->checkpointBuffer,
++						&tags);
++
++				if (tags.chunkId != (dev->checkpointPageSequence + 1) ||
++					tags.eccResult > YAFFS_ECC_RESULT_FIXED ||
++					tags.sequenceNumber != YAFFS_SEQUENCE_CHECKPOINT_DATA)
++					ok = 0;
+ 
+ 				dev->checkpointByteOffset = 0;
+ 				dev->checkpointPageSequence++;
+ 				dev->checkpointCurrentChunk++;
+ 
+-				if(dev->checkpointCurrentChunk >= dev->nChunksPerBlock)
++				if (dev->checkpointCurrentChunk >= dev->nChunksPerBlock)
+ 					dev->checkpointCurrentBlock = -1;
+ 			}
+ 		}
+ 
+-		if(ok){
++		if (ok) {
+ 			*dataBytes = dev->checkpointBuffer[dev->checkpointByteOffset];
+ 			dev->checkpointSum += *dataBytes;
+ 			dev->checkpointXor ^= *dataBytes;
+@@ -353,17 +345,17 @@ int yaffs_CheckpointRead(yaffs_Device *d
+ int yaffs_CheckpointClose(yaffs_Device *dev)
+ {
+ 
+-	if(dev->checkpointOpenForWrite){
+-		if(dev->checkpointByteOffset != 0)
++	if (dev->checkpointOpenForWrite) {
++		if (dev->checkpointByteOffset != 0)
+ 			yaffs_CheckpointFlushBuffer(dev);
+ 	} else {
+ 		int i;
+-		for(i = 0; i < dev->blocksInCheckpoint && dev->checkpointBlockList[i] >= 0; i++){
+-			yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,dev->checkpointBlockList[i]);
+-			if(bi->blockState == YAFFS_BLOCK_STATE_EMPTY)
++		for (i = 0; i < dev->blocksInCheckpoint && dev->checkpointBlockList[i] >= 0; i++) {
++			yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, dev->checkpointBlockList[i]);
++			if (bi->blockState == YAFFS_BLOCK_STATE_EMPTY)
+ 				bi->blockState = YAFFS_BLOCK_STATE_CHECKPOINT;
+ 			else {
+-				// Todo this looks odd...
++				/* Todo this looks odd... */
+ 			}
+ 		}
+ 		YFREE(dev->checkpointBlockList);
+@@ -374,27 +366,25 @@ int yaffs_CheckpointClose(yaffs_Device *
+ 	dev->nErasedBlocks -= dev->blocksInCheckpoint;
+ 
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("checkpoint byte count %d" TENDSTR),
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("checkpoint byte count %d" TENDSTR),
+ 			dev->checkpointByteCount));
+ 
+-	if(dev->checkpointBuffer){
++	if (dev->checkpointBuffer) {
+ 		/* free the buffer */
+ 		YFREE(dev->checkpointBuffer);
+ 		dev->checkpointBuffer = NULL;
+ 		return 1;
+-	}
+-	else
++	} else
+ 		return 0;
+-
+ }
+ 
+ int yaffs_CheckpointInvalidateStream(yaffs_Device *dev)
+ {
+ 	/* Erase the first checksum block */
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("checkpoint invalidate"TENDSTR)));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("checkpoint invalidate"TENDSTR)));
+ 
+-	if(!yaffs_CheckpointSpaceOk(dev))
++	if (!yaffs_CheckpointSpaceOk(dev))
+ 		return 0;
+ 
+ 	return yaffs_CheckpointErase(dev);
+--- a/fs/yaffs2/yaffs_checkptrw.h
++++ b/fs/yaffs2/yaffs_checkptrw.h
+@@ -20,9 +20,9 @@
+ 
+ int yaffs_CheckpointOpen(yaffs_Device *dev, int forWriting);
+ 
+-int yaffs_CheckpointWrite(yaffs_Device *dev,const void *data, int nBytes);
++int yaffs_CheckpointWrite(yaffs_Device *dev, const void *data, int nBytes);
+ 
+-int yaffs_CheckpointRead(yaffs_Device *dev,void *data, int nBytes);
++int yaffs_CheckpointRead(yaffs_Device *dev, void *data, int nBytes);
+ 
+ int yaffs_GetCheckpointSum(yaffs_Device *dev, __u32 *sum);
+ 
+--- a/fs/yaffs2/yaffs_ecc.c
++++ b/fs/yaffs2/yaffs_ecc.c
+@@ -29,7 +29,7 @@
+  */
+ 
+ const char *yaffs_ecc_c_version =
+-    "$Id: yaffs_ecc.c,v 1.9 2007-02-14 01:09:06 wookey Exp $";
++	"$Id: yaffs_ecc.c,v 1.11 2009-03-06 17:20:50 wookey Exp $";
+ 
+ #include "yportenv.h"
+ 
+@@ -109,12 +109,10 @@ void yaffs_ECCCalculate(const unsigned c
+ 		b = column_parity_table[*data++];
+ 		col_parity ^= b;
+ 
+-		if (b & 0x01)	// odd number of bits in the byte
+-		{
++		if (b & 0x01) {		/* odd number of bits in the byte */
+ 			line_parity ^= i;
+ 			line_parity_prime ^= ~i;
+ 		}
+-
+ 	}
+ 
+ 	ecc[2] = (~col_parity) | 0x03;
+@@ -158,7 +156,7 @@ void yaffs_ECCCalculate(const unsigned c
+ 	ecc[0] = ~t;
+ 
+ #ifdef CONFIG_YAFFS_ECC_WRONG_ORDER
+-	// Swap the bytes into the wrong order
++	/* Swap the bytes into the wrong order */
+ 	t = ecc[0];
+ 	ecc[0] = ecc[1];
+ 	ecc[1] = t;
+@@ -189,7 +187,7 @@ int yaffs_ECCCorrect(unsigned char *data
+ 		unsigned bit;
+ 
+ #ifdef CONFIG_YAFFS_ECC_WRONG_ORDER
+-		// swap the bytes to correct for the wrong order
++		/* swap the bytes to correct for the wrong order */
+ 		unsigned char t;
+ 
+ 		t = d0;
+@@ -251,7 +249,7 @@ int yaffs_ECCCorrect(unsigned char *data
+  * ECCxxxOther does ECC calcs on arbitrary n bytes of data
+  */
+ void yaffs_ECCCalculateOther(const unsigned char *data, unsigned nBytes,
+-			     yaffs_ECCOther * eccOther)
++				yaffs_ECCOther *eccOther)
+ {
+ 	unsigned int i;
+ 
+@@ -278,8 +276,8 @@ void yaffs_ECCCalculateOther(const unsig
+ }
+ 
+ int yaffs_ECCCorrectOther(unsigned char *data, unsigned nBytes,
+-			  yaffs_ECCOther * read_ecc,
+-			  const yaffs_ECCOther * test_ecc)
++			yaffs_ECCOther *read_ecc,
++			const yaffs_ECCOther *test_ecc)
+ {
+ 	unsigned char cDelta;	/* column parity delta */
+ 	unsigned lDelta;	/* line parity delta */
+@@ -294,8 +292,7 @@ int yaffs_ECCCorrectOther(unsigned char
+ 		return 0; /* no error */
+ 
+ 	if (lDelta == ~lDeltaPrime &&
+-	    (((cDelta ^ (cDelta >> 1)) & 0x15) == 0x15))
+-	{
++	    (((cDelta ^ (cDelta >> 1)) & 0x15) == 0x15)) {
+ 		/* Single bit (recoverable) error in data */
+ 
+ 		bit = 0;
+@@ -307,7 +304,7 @@ int yaffs_ECCCorrectOther(unsigned char
+ 		if (cDelta & 0x02)
+ 			bit |= 0x01;
+ 
+-		if(lDelta >= nBytes)
++		if (lDelta >= nBytes)
+ 			return -1;
+ 
+ 		data[lDelta] ^= (1 << bit);
+@@ -316,7 +313,7 @@ int yaffs_ECCCorrectOther(unsigned char
+ 	}
+ 
+ 	if ((yaffs_CountBits32(lDelta) + yaffs_CountBits32(lDeltaPrime) +
+-	     yaffs_CountBits(cDelta)) == 1) {
++			yaffs_CountBits(cDelta)) == 1) {
+ 		/* Reccoverable error in ecc */
+ 
+ 		*read_ecc = *test_ecc;
+@@ -326,6 +323,4 @@ int yaffs_ECCCorrectOther(unsigned char
+ 	/* Unrecoverable error */
+ 
+ 	return -1;
+-
+ }
+-
+--- a/fs/yaffs2/yaffs_ecc.h
++++ b/fs/yaffs2/yaffs_ecc.h
+@@ -13,15 +13,15 @@
+  * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+  */
+ 
+- /*
+-  * This code implements the ECC algorithm used in SmartMedia.
+-  *
+-  * The ECC comprises 22 bits of parity information and is stuffed into 3 bytes.
+-  * The two unused bit are set to 1.
+-  * The ECC can correct single bit errors in a 256-byte page of data. Thus, two such ECC
+-  * blocks are used on a 512-byte NAND page.
+-  *
+-  */
++/*
++ * This code implements the ECC algorithm used in SmartMedia.
++ *
++ * The ECC comprises 22 bits of parity information and is stuffed into 3 bytes.
++ * The two unused bit are set to 1.
++ * The ECC can correct single bit errors in a 256-byte page of data. Thus, two such ECC
++ * blocks are used on a 512-byte NAND page.
++ *
++ */
+ 
+ #ifndef __YAFFS_ECC_H__
+ #define __YAFFS_ECC_H__
+@@ -34,11 +34,11 @@ typedef struct {
+ 
+ void yaffs_ECCCalculate(const unsigned char *data, unsigned char *ecc);
+ int yaffs_ECCCorrect(unsigned char *data, unsigned char *read_ecc,
+-		     const unsigned char *test_ecc);
++		const unsigned char *test_ecc);
+ 
+ void yaffs_ECCCalculateOther(const unsigned char *data, unsigned nBytes,
+-			     yaffs_ECCOther * ecc);
++			yaffs_ECCOther *ecc);
+ int yaffs_ECCCorrectOther(unsigned char *data, unsigned nBytes,
+-			  yaffs_ECCOther * read_ecc,
+-			  const yaffs_ECCOther * test_ecc);
++			yaffs_ECCOther *read_ecc,
++			const yaffs_ECCOther *test_ecc);
+ #endif
+--- a/fs/yaffs2/yaffs_fs.c
++++ b/fs/yaffs2/yaffs_fs.c
+@@ -1,7 +1,7 @@
+ /*
+  * YAFFS: Yet Another Flash File System. A NAND-flash specific file system.
+  *
+- * Copyright (C) 2002-2007 Aleph One Ltd.
++ * Copyright (C) 2002-2009 Aleph One Ltd.
+  *   for Toby Churchill Ltd and Brightstar Engineering
+  *
+  * Created by Charles Manning <charles@aleph1.co.uk>
+@@ -32,18 +32,17 @@
+  */
+ 
+ const char *yaffs_fs_c_version =
+-    "$Id: yaffs_fs.c,v 1.63 2007-09-19 20:35:40 imcd Exp $";
++    "$Id: yaffs_fs.c,v 1.79 2009-03-17 01:12:00 wookey Exp $";
+ extern const char *yaffs_guts_c_version;
+ 
+ #include <linux/version.h>
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19))
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 19))
+ #include <linux/config.h>
+ #endif
+ #include <linux/kernel.h>
+ #include <linux/module.h>
+ #include <linux/slab.h>
+ #include <linux/init.h>
+-#include <linux/list.h>
+ #include <linux/fs.h>
+ #include <linux/proc_fs.h>
+ #include <linux/smp_lock.h>
+@@ -53,10 +52,12 @@ extern const char *yaffs_guts_c_version;
+ #include <linux/string.h>
+ #include <linux/ctype.h>
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#include "asm/div64.h"
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 
+ #include <linux/statfs.h>	/* Added NCB 15-8-2003 */
+-#include <asm/statfs.h>
++#include <linux/statfs.h>
+ #define UnlockPage(p) unlock_page(p)
+ #define Page_Uptodate(page)	test_bit(PG_uptodate, &(page)->flags)
+ 
+@@ -69,22 +70,45 @@ extern const char *yaffs_guts_c_version;
+ #define	BDEVNAME_SIZE		0
+ #define	yaffs_devname(sb, buf)	kdevname(sb->s_dev)
+ 
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 5, 0))
+ /* added NCB 26/5/2006 for 2.4.25-vrs2-tcl1 kernel */
+ #define __user
+ #endif
+ 
+ #endif
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 26))
++#define YPROC_ROOT  (&proc_root)
++#else
++#define YPROC_ROOT  NULL
++#endif
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ #define WRITE_SIZE_STR "writesize"
+-#define WRITE_SIZE(mtd) (mtd)->writesize
++#define WRITE_SIZE(mtd) ((mtd)->writesize)
+ #else
+ #define WRITE_SIZE_STR "oobblock"
+-#define WRITE_SIZE(mtd) (mtd)->oobblock
++#define WRITE_SIZE(mtd) ((mtd)->oobblock)
+ #endif
+ 
+-#include <asm/uaccess.h>
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 27))
++#define YAFFS_USE_WRITE_BEGIN_END 1
++#else
++#define YAFFS_USE_WRITE_BEGIN_END 0
++#endif
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 28))
++static uint32_t YCALCBLOCKS(uint64_t partition_size, uint32_t block_size)
++{
++	uint64_t result = partition_size;
++	do_div(result, block_size);
++	return (uint32_t)result;
++}
++#else
++#define YCALCBLOCKS(s, b) ((s)/(b))
++#endif
++
++#include <linux/uaccess.h>
+ 
+ #include "yportenv.h"
+ #include "yaffs_guts.h"
+@@ -96,28 +120,44 @@ extern const char *yaffs_guts_c_version;
+ 
+ unsigned int yaffs_traceMask = YAFFS_TRACE_BAD_BLOCKS;
+ unsigned int yaffs_wr_attempts = YAFFS_WR_ATTEMPTS;
++unsigned int yaffs_auto_checkpoint = 1;
+ 
+ /* Module Parameters */
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+-module_param(yaffs_traceMask,uint,0644);
+-module_param(yaffs_wr_attempts,uint,0644);
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
++module_param(yaffs_traceMask, uint, 0644);
++module_param(yaffs_wr_attempts, uint, 0644);
++module_param(yaffs_auto_checkpoint, uint, 0644);
++#else
++MODULE_PARM(yaffs_traceMask, "i");
++MODULE_PARM(yaffs_wr_attempts, "i");
++MODULE_PARM(yaffs_auto_checkpoint, "i");
++#endif
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 25))
++/* use iget and read_inode */
++#define Y_IGET(sb, inum) iget((sb), (inum))
++static void yaffs_read_inode(struct inode *inode);
++
+ #else
+-MODULE_PARM(yaffs_traceMask,"i");
+-MODULE_PARM(yaffs_wr_attempts,"i");
++/* Call local equivalent */
++#define YAFFS_USE_OWN_IGET
++#define Y_IGET(sb, inum) yaffs_iget((sb), (inum))
++
++static struct inode *yaffs_iget(struct super_block *sb, unsigned long ino);
+ #endif
+ 
+ /*#define T(x) printk x */
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18))
+-#define yaffs_InodeToObjectLV(iptr) (iptr)->i_private
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 18))
++#define yaffs_InodeToObjectLV(iptr) ((iptr)->i_private)
+ #else
+-#define yaffs_InodeToObjectLV(iptr) (iptr)->u.generic_ip
++#define yaffs_InodeToObjectLV(iptr) ((iptr)->u.generic_ip)
+ #endif
+ 
+ #define yaffs_InodeToObject(iptr) ((yaffs_Object *)(yaffs_InodeToObjectLV(iptr)))
+ #define yaffs_DentryToObject(dptr) yaffs_InodeToObject((dptr)->d_inode)
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ #define yaffs_SuperToDevice(sb)	((yaffs_Device *)sb->s_fs_info)
+ #else
+ #define yaffs_SuperToDevice(sb)	((yaffs_Device *)sb->u.generic_sbp)
+@@ -126,47 +166,49 @@ MODULE_PARM(yaffs_wr_attempts,"i");
+ static void yaffs_put_super(struct super_block *sb);
+ 
+ static ssize_t yaffs_file_write(struct file *f, const char *buf, size_t n,
+-				loff_t * pos);
++				loff_t *pos);
++static ssize_t yaffs_hold_space(struct file *f);
++static void yaffs_release_space(struct file *f);
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_file_flush(struct file *file, fl_owner_t id);
+ #else
+ static int yaffs_file_flush(struct file *file);
+ #endif
+ 
+ static int yaffs_sync_object(struct file *file, struct dentry *dentry,
+-			     int datasync);
++				int datasync);
+ 
+ static int yaffs_readdir(struct file *f, void *dirent, filldir_t filldir);
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode,
+ 			struct nameidata *n);
+ static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry,
+-				   struct nameidata *n);
++					struct nameidata *n);
+ #else
+ static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode);
+ static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry);
+ #endif
+ static int yaffs_link(struct dentry *old_dentry, struct inode *dir,
+-		      struct dentry *dentry);
++			struct dentry *dentry);
+ static int yaffs_unlink(struct inode *dir, struct dentry *dentry);
+ static int yaffs_symlink(struct inode *dir, struct dentry *dentry,
+-			 const char *symname);
++			const char *symname);
+ static int yaffs_mkdir(struct inode *dir, struct dentry *dentry, int mode);
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode,
+-		       dev_t dev);
++			dev_t dev);
+ #else
+ static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode,
+-		       int dev);
++			int dev);
+ #endif
+ static int yaffs_rename(struct inode *old_dir, struct dentry *old_dentry,
+ 			struct inode *new_dir, struct dentry *new_dentry);
+ static int yaffs_setattr(struct dentry *dentry, struct iattr *attr);
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_sync_fs(struct super_block *sb, int wait);
+ static void yaffs_write_super(struct super_block *sb);
+ #else
+@@ -174,33 +216,47 @@ static int yaffs_sync_fs(struct super_bl
+ static int yaffs_write_super(struct super_block *sb);
+ #endif
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_statfs(struct dentry *dentry, struct kstatfs *buf);
+-#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_statfs(struct super_block *sb, struct kstatfs *buf);
+ #else
+ static int yaffs_statfs(struct super_block *sb, struct statfs *buf);
+ #endif
+-static void yaffs_read_inode(struct inode *inode);
+ 
++#ifdef YAFFS_HAS_PUT_INODE
+ static void yaffs_put_inode(struct inode *inode);
++#endif
++
+ static void yaffs_delete_inode(struct inode *);
+ static void yaffs_clear_inode(struct inode *);
+ 
+ static int yaffs_readpage(struct file *file, struct page *page);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_writepage(struct page *page, struct writeback_control *wbc);
+ #else
+ static int yaffs_writepage(struct page *page);
+ #endif
++
++
++#if (YAFFS_USE_WRITE_BEGIN_END != 0)
++static int yaffs_write_begin(struct file *filp, struct address_space *mapping,
++				loff_t pos, unsigned len, unsigned flags,
++				struct page **pagep, void **fsdata);
++static int yaffs_write_end(struct file *filp, struct address_space *mapping,
++				loff_t pos, unsigned len, unsigned copied,
++				struct page *pg, void *fsdadata);
++#else
+ static int yaffs_prepare_write(struct file *f, struct page *pg,
+-			       unsigned offset, unsigned to);
++				unsigned offset, unsigned to);
+ static int yaffs_commit_write(struct file *f, struct page *pg, unsigned offset,
+-			      unsigned to);
++				unsigned to);
+ 
+-static int yaffs_readlink(struct dentry *dentry, char __user * buffer,
+-			  int buflen);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
++#endif
++
++static int yaffs_readlink(struct dentry *dentry, char __user *buffer,
++				int buflen);
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 13))
+ static void *yaffs_follow_link(struct dentry *dentry, struct nameidata *nd);
+ #else
+ static int yaffs_follow_link(struct dentry *dentry, struct nameidata *nd);
+@@ -209,12 +265,17 @@ static int yaffs_follow_link(struct dent
+ static struct address_space_operations yaffs_file_address_operations = {
+ 	.readpage = yaffs_readpage,
+ 	.writepage = yaffs_writepage,
++#if (YAFFS_USE_WRITE_BEGIN_END > 0)
++	.write_begin = yaffs_write_begin,
++	.write_end = yaffs_write_end,
++#else
+ 	.prepare_write = yaffs_prepare_write,
+ 	.commit_write = yaffs_commit_write,
++#endif
+ };
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,22))
+-static struct file_operations yaffs_file_operations = {
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 22))
++static const struct file_operations yaffs_file_operations = {
+ 	.read = do_sync_read,
+ 	.write = do_sync_write,
+ 	.aio_read = generic_file_aio_read,
+@@ -224,11 +285,12 @@ static struct file_operations yaffs_file
+ 	.fsync = yaffs_sync_object,
+ 	.splice_read = generic_file_splice_read,
+ 	.splice_write = generic_file_splice_write,
++	.llseek = generic_file_llseek,
+ };
+ 
+-#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18))
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 18))
+ 
+-static struct file_operations yaffs_file_operations = {
++static const struct file_operations yaffs_file_operations = {
+ 	.read = do_sync_read,
+ 	.write = do_sync_write,
+ 	.aio_read = generic_file_aio_read,
+@@ -241,29 +303,29 @@ static struct file_operations yaffs_file
+ 
+ #else
+ 
+-static struct file_operations yaffs_file_operations = {
++static const struct file_operations yaffs_file_operations = {
+ 	.read = generic_file_read,
+ 	.write = generic_file_write,
+ 	.mmap = generic_file_mmap,
+ 	.flush = yaffs_file_flush,
+ 	.fsync = yaffs_sync_object,
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 	.sendfile = generic_file_sendfile,
+ #endif
+ };
+ #endif
+ 
+-static struct inode_operations yaffs_file_inode_operations = {
++static const struct inode_operations yaffs_file_inode_operations = {
+ 	.setattr = yaffs_setattr,
+ };
+ 
+-static struct inode_operations yaffs_symlink_inode_operations = {
++static const struct inode_operations yaffs_symlink_inode_operations = {
+ 	.readlink = yaffs_readlink,
+ 	.follow_link = yaffs_follow_link,
+ 	.setattr = yaffs_setattr,
+ };
+ 
+-static struct inode_operations yaffs_dir_inode_operations = {
++static const struct inode_operations yaffs_dir_inode_operations = {
+ 	.create = yaffs_create,
+ 	.lookup = yaffs_lookup,
+ 	.link = yaffs_link,
+@@ -276,16 +338,21 @@ static struct inode_operations yaffs_dir
+ 	.setattr = yaffs_setattr,
+ };
+ 
+-static struct file_operations yaffs_dir_operations = {
++static const struct file_operations yaffs_dir_operations = {
+ 	.read = generic_read_dir,
+ 	.readdir = yaffs_readdir,
+ 	.fsync = yaffs_sync_object,
+ };
+ 
+-static struct super_operations yaffs_super_ops = {
++static const struct super_operations yaffs_super_ops = {
+ 	.statfs = yaffs_statfs,
++
++#ifndef YAFFS_USE_OWN_IGET
+ 	.read_inode = yaffs_read_inode,
++#endif
++#ifdef YAFFS_HAS_PUT_INODE
+ 	.put_inode = yaffs_put_inode,
++#endif
+ 	.put_super = yaffs_put_super,
+ 	.delete_inode = yaffs_delete_inode,
+ 	.clear_inode = yaffs_clear_inode,
+@@ -293,22 +360,21 @@ static struct super_operations yaffs_sup
+ 	.write_super = yaffs_write_super,
+ };
+ 
+-static void yaffs_GrossLock(yaffs_Device * dev)
++static void yaffs_GrossLock(yaffs_Device *dev)
+ {
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs locking\n"));
+-
++	T(YAFFS_TRACE_OS, ("yaffs locking %p\n", current));
+ 	down(&dev->grossLock);
++	T(YAFFS_TRACE_OS, ("yaffs locked %p\n", current));
+ }
+ 
+-static void yaffs_GrossUnlock(yaffs_Device * dev)
++static void yaffs_GrossUnlock(yaffs_Device *dev)
+ {
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs unlocking\n"));
++	T(YAFFS_TRACE_OS, ("yaffs unlocking %p\n", current));
+ 	up(&dev->grossLock);
+-
+ }
+ 
+-static int yaffs_readlink(struct dentry *dentry, char __user * buffer,
+-			  int buflen)
++static int yaffs_readlink(struct dentry *dentry, char __user *buffer,
++			int buflen)
+ {
+ 	unsigned char *alias;
+ 	int ret;
+@@ -329,7 +395,7 @@ static int yaffs_readlink(struct dentry
+ 	return ret;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 13))
+ static void *yaffs_follow_link(struct dentry *dentry, struct nameidata *nd)
+ #else
+ static int yaffs_follow_link(struct dentry *dentry, struct nameidata *nd)
+@@ -345,32 +411,31 @@ static int yaffs_follow_link(struct dent
+ 
+ 	yaffs_GrossUnlock(dev);
+ 
+-	if (!alias)
+-        {
++	if (!alias) {
+ 		ret = -ENOMEM;
+ 		goto out;
+-        }
++	}
+ 
+ 	ret = vfs_follow_link(nd, alias);
+ 	kfree(alias);
+ out:
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
+-	return ERR_PTR (ret);
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 13))
++	return ERR_PTR(ret);
+ #else
+ 	return ret;
+ #endif
+ }
+ 
+ struct inode *yaffs_get_inode(struct super_block *sb, int mode, int dev,
+-			      yaffs_Object * obj);
++				yaffs_Object *obj);
+ 
+ /*
+  * Lookup is used to find objects in the fs
+  */
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 
+ static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry,
+-				   struct nameidata *n)
++				struct nameidata *n)
+ #else
+ static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry)
+ #endif
+@@ -383,12 +448,11 @@ static struct dentry *yaffs_lookup(struc
+ 	yaffs_GrossLock(dev);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_lookup for %d:%s\n",
+-	   yaffs_InodeToObject(dir)->objectId, dentry->d_name.name));
++		("yaffs_lookup for %d:%s\n",
++		yaffs_InodeToObject(dir)->objectId, dentry->d_name.name));
+ 
+-	obj =
+-	    yaffs_FindObjectByName(yaffs_InodeToObject(dir),
+-				   dentry->d_name.name);
++	obj = yaffs_FindObjectByName(yaffs_InodeToObject(dir),
++					dentry->d_name.name);
+ 
+ 	obj = yaffs_GetEquivalentObject(obj);	/* in case it was a hardlink */
+ 
+@@ -397,13 +461,13 @@ static struct dentry *yaffs_lookup(struc
+ 
+ 	if (obj) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_lookup found %d\n", obj->objectId));
++			("yaffs_lookup found %d\n", obj->objectId));
+ 
+ 		inode = yaffs_get_inode(dir->i_sb, obj->yst_mode, 0, obj);
+ 
+ 		if (inode) {
+ 			T(YAFFS_TRACE_OS,
+-			  (KERN_DEBUG "yaffs_loookup dentry \n"));
++				("yaffs_loookup dentry \n"));
+ /* #if 0 asserted by NCB for 2.5/6 compatability - falls through to
+  * d_add even if NULL inode */
+ #if 0
+@@ -416,7 +480,7 @@ static struct dentry *yaffs_lookup(struc
+ 		}
+ 
+ 	} else {
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_lookup not found\n"));
++		T(YAFFS_TRACE_OS, ("yaffs_lookup not found\n"));
+ 
+ 	}
+ 
+@@ -425,20 +489,22 @@ static struct dentry *yaffs_lookup(struc
+ 	d_add(dentry, inode);
+ 
+ 	return NULL;
+-	/*      return (ERR_PTR(-EIO)); */
+-
+ }
+ 
++
++#ifdef YAFFS_HAS_PUT_INODE
++
+ /* For now put inode is just for debugging
+  * Put inode is called when the inode **structure** is put.
+  */
+ static void yaffs_put_inode(struct inode *inode)
+ {
+ 	T(YAFFS_TRACE_OS,
+-	  ("yaffs_put_inode: ino %d, count %d\n", (int)inode->i_ino,
+-	   atomic_read(&inode->i_count)));
++		("yaffs_put_inode: ino %d, count %d\n", (int)inode->i_ino,
++		atomic_read(&inode->i_count)));
+ 
+ }
++#endif
+ 
+ /* clear is called to tell the fs to release any per-inode data it holds */
+ static void yaffs_clear_inode(struct inode *inode)
+@@ -449,9 +515,9 @@ static void yaffs_clear_inode(struct ino
+ 	obj = yaffs_InodeToObject(inode);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  ("yaffs_clear_inode: ino %d, count %d %s\n", (int)inode->i_ino,
+-	   atomic_read(&inode->i_count),
+-	   obj ? "object exists" : "null object"));
++		("yaffs_clear_inode: ino %d, count %d %s\n", (int)inode->i_ino,
++		atomic_read(&inode->i_count),
++		obj ? "object exists" : "null object"));
+ 
+ 	if (obj) {
+ 		dev = obj->myDev;
+@@ -486,23 +552,23 @@ static void yaffs_delete_inode(struct in
+ 	yaffs_Device *dev;
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  ("yaffs_delete_inode: ino %d, count %d %s\n", (int)inode->i_ino,
+-	   atomic_read(&inode->i_count),
+-	   obj ? "object exists" : "null object"));
++		("yaffs_delete_inode: ino %d, count %d %s\n", (int)inode->i_ino,
++		atomic_read(&inode->i_count),
++		obj ? "object exists" : "null object"));
+ 
+ 	if (obj) {
+ 		dev = obj->myDev;
+ 		yaffs_GrossLock(dev);
+-		yaffs_DeleteFile(obj);
++		yaffs_DeleteObject(obj);
+ 		yaffs_GrossUnlock(dev);
+ 	}
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
+-        truncate_inode_pages (&inode->i_data, 0);
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 13))
++	truncate_inode_pages(&inode->i_data, 0);
+ #endif
+ 	clear_inode(inode);
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_file_flush(struct file *file, fl_owner_t id)
+ #else
+ static int yaffs_file_flush(struct file *file)
+@@ -513,8 +579,8 @@ static int yaffs_file_flush(struct file
+ 	yaffs_Device *dev = obj->myDev;
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_file_flush object %d (%s)\n", obj->objectId,
+-	   obj->dirty ? "dirty" : "clean"));
++		("yaffs_file_flush object %d (%s)\n", obj->objectId,
++		obj->dirty ? "dirty" : "clean"));
+ 
+ 	yaffs_GrossLock(dev);
+ 
+@@ -535,15 +601,15 @@ static int yaffs_readpage_nolock(struct
+ 
+ 	yaffs_Device *dev;
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_readpage at %08x, size %08x\n",
+-			   (unsigned)(pg->index << PAGE_CACHE_SHIFT),
+-			   (unsigned)PAGE_CACHE_SIZE));
++	T(YAFFS_TRACE_OS, ("yaffs_readpage at %08x, size %08x\n",
++			(unsigned)(pg->index << PAGE_CACHE_SHIFT),
++			(unsigned)PAGE_CACHE_SIZE));
+ 
+ 	obj = yaffs_DentryToObject(f->f_dentry);
+ 
+ 	dev = obj->myDev;
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 	BUG_ON(!PageLocked(pg));
+ #else
+ 	if (!PageLocked(pg))
+@@ -555,9 +621,9 @@ static int yaffs_readpage_nolock(struct
+ 
+ 	yaffs_GrossLock(dev);
+ 
+-	ret =
+-	    yaffs_ReadDataFromFile(obj, pg_buf, pg->index << PAGE_CACHE_SHIFT,
+-				   PAGE_CACHE_SIZE);
++	ret = yaffs_ReadDataFromFile(obj, pg_buf,
++				pg->index << PAGE_CACHE_SHIFT,
++				PAGE_CACHE_SIZE);
+ 
+ 	yaffs_GrossUnlock(dev);
+ 
+@@ -575,7 +641,7 @@ static int yaffs_readpage_nolock(struct
+ 	flush_dcache_page(pg);
+ 	kunmap(pg);
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_readpage done\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_readpage done\n"));
+ 	return ret;
+ }
+ 
+@@ -593,7 +659,7 @@ static int yaffs_readpage(struct file *f
+ 
+ /* writepage inspired by/stolen from smbfs */
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_writepage(struct page *page, struct writeback_control *wbc)
+ #else
+ static int yaffs_writepage(struct page *page)
+@@ -616,12 +682,11 @@ static int yaffs_writepage(struct page *
+ 
+ 	if (offset > inode->i_size) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG
+-		   "yaffs_writepage at %08x, inode size = %08x!!!\n",
+-		   (unsigned)(page->index << PAGE_CACHE_SHIFT),
+-		   (unsigned)inode->i_size));
++			("yaffs_writepage at %08x, inode size = %08x!!!\n",
++			(unsigned)(page->index << PAGE_CACHE_SHIFT),
++			(unsigned)inode->i_size));
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "                -> don't care!!\n"));
++			("                -> don't care!!\n"));
+ 		unlock_page(page);
+ 		return 0;
+ 	}
+@@ -629,11 +694,10 @@ static int yaffs_writepage(struct page *
+ 	end_index = inode->i_size >> PAGE_CACHE_SHIFT;
+ 
+ 	/* easy case */
+-	if (page->index < end_index) {
++	if (page->index < end_index)
+ 		nBytes = PAGE_CACHE_SIZE;
+-	} else {
++	else
+ 		nBytes = inode->i_size & (PAGE_CACHE_SIZE - 1);
+-	}
+ 
+ 	get_page(page);
+ 
+@@ -643,19 +707,18 @@ static int yaffs_writepage(struct page *
+ 	yaffs_GrossLock(obj->myDev);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_writepage at %08x, size %08x\n",
+-	   (unsigned)(page->index << PAGE_CACHE_SHIFT), nBytes));
++		("yaffs_writepage at %08x, size %08x\n",
++		(unsigned)(page->index << PAGE_CACHE_SHIFT), nBytes));
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "writepag0: obj = %05x, ino = %05x\n",
+-	   (int)obj->variant.fileVariant.fileSize, (int)inode->i_size));
++		("writepag0: obj = %05x, ino = %05x\n",
++		(int)obj->variant.fileVariant.fileSize, (int)inode->i_size));
+ 
+-	nWritten =
+-	    yaffs_WriteDataToFile(obj, buffer, page->index << PAGE_CACHE_SHIFT,
+-				  nBytes, 0);
++	nWritten = yaffs_WriteDataToFile(obj, buffer,
++			page->index << PAGE_CACHE_SHIFT, nBytes, 0);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "writepag1: obj = %05x, ino = %05x\n",
+-	   (int)obj->variant.fileVariant.fileSize, (int)inode->i_size));
++		("writepag1: obj = %05x, ino = %05x\n",
++		(int)obj->variant.fileVariant.fileSize, (int)inode->i_size));
+ 
+ 	yaffs_GrossUnlock(obj->myDev);
+ 
+@@ -667,100 +730,207 @@ static int yaffs_writepage(struct page *
+ 	return (nWritten == nBytes) ? 0 : -ENOSPC;
+ }
+ 
++
++#if (YAFFS_USE_WRITE_BEGIN_END > 0)
++static int yaffs_write_begin(struct file *filp, struct address_space *mapping,
++				loff_t pos, unsigned len, unsigned flags,
++				struct page **pagep, void **fsdata)
++{
++	struct page *pg = NULL;
++	pgoff_t index = pos >> PAGE_CACHE_SHIFT;
++	uint32_t offset = pos & (PAGE_CACHE_SIZE - 1);
++	uint32_t to = offset + len;
++
++	int ret = 0;
++	int space_held = 0;
++
++	T(YAFFS_TRACE_OS, ("start yaffs_write_begin\n"));
++	/* Get a page */
++#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 28)
++	pg = grab_cache_page_write_begin(mapping, index, flags);
++#else
++	pg = __grab_cache_page(mapping, index);
++#endif
++
++	*pagep = pg;
++	if (!pg) {
++		ret =  -ENOMEM;
++		goto out;
++	}
++	/* Get fs space */
++	space_held = yaffs_hold_space(filp);
++
++	if (!space_held) {
++		ret = -ENOSPC;
++		goto out;
++	}
++
++	/* Update page if required */
++
++	if (!Page_Uptodate(pg) && (offset || to < PAGE_CACHE_SIZE))
++		ret = yaffs_readpage_nolock(filp, pg);
++
++	if (ret)
++		goto out;
++
++	/* Happy path return */
++	T(YAFFS_TRACE_OS, ("end yaffs_write_begin - ok\n"));
++
++	return 0;
++
++out:
++	T(YAFFS_TRACE_OS, ("end yaffs_write_begin fail returning %d\n", ret));
++	if (space_held)
++		yaffs_release_space(filp);
++	if (pg) {
++		unlock_page(pg);
++		page_cache_release(pg);
++	}
++	return ret;
++}
++
++#else
++
+ static int yaffs_prepare_write(struct file *f, struct page *pg,
+-			       unsigned offset, unsigned to)
++				unsigned offset, unsigned to)
+ {
++	T(YAFFS_TRACE_OS, ("yaffs_prepair_write\n"));
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_prepair_write\n"));
+ 	if (!Page_Uptodate(pg) && (offset || to < PAGE_CACHE_SIZE))
+ 		return yaffs_readpage_nolock(f, pg);
+-
+ 	return 0;
++}
++#endif
++
++#if (YAFFS_USE_WRITE_BEGIN_END > 0)
++static int yaffs_write_end(struct file *filp, struct address_space *mapping,
++				loff_t pos, unsigned len, unsigned copied,
++				struct page *pg, void *fsdadata)
++{
++	int ret = 0;
++	void *addr, *kva;
++	uint32_t offset_into_page = pos & (PAGE_CACHE_SIZE - 1);
++
++	kva = kmap(pg);
++	addr = kva + offset_into_page;
++
++	T(YAFFS_TRACE_OS,
++		("yaffs_write_end addr %x pos %x nBytes %d\n",
++		(unsigned) addr,
++		(int)pos, copied));
++
++	ret = yaffs_file_write(filp, addr, copied, &pos);
++
++	if (ret != copied) {
++		T(YAFFS_TRACE_OS,
++			("yaffs_write_end not same size ret %d  copied %d\n",
++			ret, copied));
++		SetPageError(pg);
++		ClearPageUptodate(pg);
++	} else {
++		SetPageUptodate(pg);
++	}
++
++	kunmap(pg);
+ 
++	yaffs_release_space(filp);
++	unlock_page(pg);
++	page_cache_release(pg);
++	return ret;
+ }
++#else
+ 
+ static int yaffs_commit_write(struct file *f, struct page *pg, unsigned offset,
+-			      unsigned to)
++				unsigned to)
+ {
++	void *addr, *kva;
+ 
+-	void *addr = page_address(pg) + offset;
+ 	loff_t pos = (((loff_t) pg->index) << PAGE_CACHE_SHIFT) + offset;
+ 	int nBytes = to - offset;
+ 	int nWritten;
+ 
+ 	unsigned spos = pos;
+-	unsigned saddr = (unsigned)addr;
++	unsigned saddr;
++
++	kva = kmap(pg);
++	addr = kva + offset;
++
++	saddr = (unsigned) addr;
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_commit_write addr %x pos %x nBytes %d\n", saddr,
+-	   spos, nBytes));
++		("yaffs_commit_write addr %x pos %x nBytes %d\n",
++		saddr, spos, nBytes));
+ 
+ 	nWritten = yaffs_file_write(f, addr, nBytes, &pos);
+ 
+ 	if (nWritten != nBytes) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG
+-		   "yaffs_commit_write not same size nWritten %d  nBytes %d\n",
+-		   nWritten, nBytes));
++			("yaffs_commit_write not same size nWritten %d  nBytes %d\n",
++			nWritten, nBytes));
+ 		SetPageError(pg);
+ 		ClearPageUptodate(pg);
+ 	} else {
+ 		SetPageUptodate(pg);
+ 	}
+ 
++	kunmap(pg);
++
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_commit_write returning %d\n",
+-	   nWritten == nBytes ? 0 : nWritten));
++		("yaffs_commit_write returning %d\n",
++		nWritten == nBytes ? 0 : nWritten));
+ 
+ 	return nWritten == nBytes ? 0 : nWritten;
+-
+ }
++#endif
++
+ 
+-static void yaffs_FillInodeFromObject(struct inode *inode, yaffs_Object * obj)
++static void yaffs_FillInodeFromObject(struct inode *inode, yaffs_Object *obj)
+ {
+ 	if (inode && obj) {
+ 
+ 
+ 		/* Check mode against the variant type and attempt to repair if broken. */
+- 		__u32 mode = obj->yst_mode;
+- 		switch( obj->variantType ){
+- 		case YAFFS_OBJECT_TYPE_FILE :
+- 		        if( ! S_ISREG(mode) ){
+- 			        obj->yst_mode &= ~S_IFMT;
+- 			        obj->yst_mode |= S_IFREG;
+- 			}
+-
+- 			break;
+- 		case YAFFS_OBJECT_TYPE_SYMLINK :
+- 		        if( ! S_ISLNK(mode) ){
+- 			        obj->yst_mode &= ~S_IFMT;
+- 				obj->yst_mode |= S_IFLNK;
+- 			}
+-
+- 			break;
+- 		case YAFFS_OBJECT_TYPE_DIRECTORY :
+- 		        if( ! S_ISDIR(mode) ){
+- 			        obj->yst_mode &= ~S_IFMT;
+- 			        obj->yst_mode |= S_IFDIR;
+- 			}
+-
+- 			break;
+- 		case YAFFS_OBJECT_TYPE_UNKNOWN :
+- 		case YAFFS_OBJECT_TYPE_HARDLINK :
+- 		case YAFFS_OBJECT_TYPE_SPECIAL :
+- 		default:
+- 		        /* TODO? */
+- 		        break;
+- 		}
++		__u32 mode = obj->yst_mode;
++		switch (obj->variantType) {
++		case YAFFS_OBJECT_TYPE_FILE:
++			if (!S_ISREG(mode)) {
++				obj->yst_mode &= ~S_IFMT;
++				obj->yst_mode |= S_IFREG;
++			}
++
++			break;
++		case YAFFS_OBJECT_TYPE_SYMLINK:
++			if (!S_ISLNK(mode)) {
++				obj->yst_mode &= ~S_IFMT;
++				obj->yst_mode |= S_IFLNK;
++			}
++
++			break;
++		case YAFFS_OBJECT_TYPE_DIRECTORY:
++			if (!S_ISDIR(mode)) {
++				obj->yst_mode &= ~S_IFMT;
++				obj->yst_mode |= S_IFDIR;
++			}
++
++			break;
++		case YAFFS_OBJECT_TYPE_UNKNOWN:
++		case YAFFS_OBJECT_TYPE_HARDLINK:
++		case YAFFS_OBJECT_TYPE_SPECIAL:
++		default:
++			/* TODO? */
++			break;
++		}
++
++		inode->i_flags |= S_NOATIME;
+ 
+ 		inode->i_ino = obj->objectId;
+ 		inode->i_mode = obj->yst_mode;
+ 		inode->i_uid = obj->yst_uid;
+ 		inode->i_gid = obj->yst_gid;
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19))
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 19))
+ 		inode->i_blksize = inode->i_sb->s_blocksize;
+ #endif
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 
+ 		inode->i_rdev = old_decode_dev(obj->yst_rdev);
+ 		inode->i_atime.tv_sec = (time_t) (obj->yst_atime);
+@@ -781,26 +951,25 @@ static void yaffs_FillInodeFromObject(st
+ 		inode->i_nlink = yaffs_GetObjectLinkCount(obj);
+ 
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG
+-		   "yaffs_FillInode mode %x uid %d gid %d size %d count %d\n",
+-		   inode->i_mode, inode->i_uid, inode->i_gid,
+-		   (int)inode->i_size, atomic_read(&inode->i_count)));
++			("yaffs_FillInode mode %x uid %d gid %d size %d count %d\n",
++			inode->i_mode, inode->i_uid, inode->i_gid,
++			(int)inode->i_size, atomic_read(&inode->i_count)));
+ 
+ 		switch (obj->yst_mode & S_IFMT) {
+ 		default:	/* fifo, device or socket */
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 			init_special_inode(inode, obj->yst_mode,
+-					   old_decode_dev(obj->yst_rdev));
++					old_decode_dev(obj->yst_rdev));
+ #else
+ 			init_special_inode(inode, obj->yst_mode,
+-					   (dev_t) (obj->yst_rdev));
++					(dev_t) (obj->yst_rdev));
+ #endif
+ 			break;
+ 		case S_IFREG:	/* file */
+ 			inode->i_op = &yaffs_file_inode_operations;
+ 			inode->i_fop = &yaffs_file_operations;
+ 			inode->i_mapping->a_ops =
+-			    &yaffs_file_address_operations;
++				&yaffs_file_address_operations;
+ 			break;
+ 		case S_IFDIR:	/* directory */
+ 			inode->i_op = &yaffs_dir_inode_operations;
+@@ -817,34 +986,36 @@ static void yaffs_FillInodeFromObject(st
+ 
+ 	} else {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_FileInode invalid parameters\n"));
++			("yaffs_FileInode invalid parameters\n"));
+ 	}
+ 
+ }
+ 
+ struct inode *yaffs_get_inode(struct super_block *sb, int mode, int dev,
+-			      yaffs_Object * obj)
++				yaffs_Object *obj)
+ {
+ 	struct inode *inode;
+ 
+ 	if (!sb) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_get_inode for NULL super_block!!\n"));
++			("yaffs_get_inode for NULL super_block!!\n"));
+ 		return NULL;
+ 
+ 	}
+ 
+ 	if (!obj) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_get_inode for NULL object!!\n"));
++			("yaffs_get_inode for NULL object!!\n"));
+ 		return NULL;
+ 
+ 	}
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_get_inode for object %d\n", obj->objectId));
++		("yaffs_get_inode for object %d\n", obj->objectId));
+ 
+-	inode = iget(sb, obj->objectId);
++	inode = Y_IGET(sb, obj->objectId);
++	if (IS_ERR(inode))
++		return NULL;
+ 
+ 	/* NB Side effect: iget calls back to yaffs_read_inode(). */
+ 	/* iget also increments the inode's i_count */
+@@ -854,7 +1025,7 @@ struct inode *yaffs_get_inode(struct sup
+ }
+ 
+ static ssize_t yaffs_file_write(struct file *f, const char *buf, size_t n,
+-				loff_t * pos)
++				loff_t *pos)
+ {
+ 	yaffs_Object *obj;
+ 	int nWritten, ipos;
+@@ -869,28 +1040,26 @@ static ssize_t yaffs_file_write(struct f
+ 
+ 	inode = f->f_dentry->d_inode;
+ 
+-	if (!S_ISBLK(inode->i_mode) && f->f_flags & O_APPEND) {
++	if (!S_ISBLK(inode->i_mode) && f->f_flags & O_APPEND)
+ 		ipos = inode->i_size;
+-	} else {
++	else
+ 		ipos = *pos;
+-	}
+ 
+-	if (!obj) {
++	if (!obj)
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_file_write: hey obj is null!\n"));
+-	} else {
++			("yaffs_file_write: hey obj is null!\n"));
++	else
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG
+-		   "yaffs_file_write about to write writing %d bytes"
+-		   "to object %d at %d\n",
+-		   n, obj->objectId, ipos));
+-	}
++			("yaffs_file_write about to write writing %zu bytes"
++			"to object %d at %d\n",
++			n, obj->objectId, ipos));
+ 
+ 	nWritten = yaffs_WriteDataToFile(obj, buf, ipos, n, 0);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_file_write writing %d bytes, %d written at %d\n",
+-	   n, nWritten, ipos));
++		("yaffs_file_write writing %zu bytes, %d written at %d\n",
++		n, nWritten, ipos));
++
+ 	if (nWritten > 0) {
+ 		ipos += nWritten;
+ 		*pos = ipos;
+@@ -899,10 +1068,9 @@ static ssize_t yaffs_file_write(struct f
+ 			inode->i_blocks = (ipos + 511) >> 9;
+ 
+ 			T(YAFFS_TRACE_OS,
+-			  (KERN_DEBUG
+-			   "yaffs_file_write size updated to %d bytes, "
+-			   "%d blocks\n",
+-			   ipos, (int)(inode->i_blocks)));
++				("yaffs_file_write size updated to %d bytes, "
++				"%d blocks\n",
++				ipos, (int)(inode->i_blocks)));
+ 		}
+ 
+ 	}
+@@ -910,13 +1078,54 @@ static ssize_t yaffs_file_write(struct f
+ 	return nWritten == 0 ? -ENOSPC : nWritten;
+ }
+ 
++/* Space holding and freeing is done to ensure we have space available for write_begin/end */
++/* For now we just assume few parallel writes and check against a small number. */
++/* Todo: need to do this with a counter to handle parallel reads better */
++
++static ssize_t yaffs_hold_space(struct file *f)
++{
++	yaffs_Object *obj;
++	yaffs_Device *dev;
++
++	int nFreeChunks;
++
++
++	obj = yaffs_DentryToObject(f->f_dentry);
++
++	dev = obj->myDev;
++
++	yaffs_GrossLock(dev);
++
++	nFreeChunks = yaffs_GetNumberOfFreeChunks(dev);
++
++	yaffs_GrossUnlock(dev);
++
++	return (nFreeChunks > 20) ? 1 : 0;
++}
++
++static void yaffs_release_space(struct file *f)
++{
++	yaffs_Object *obj;
++	yaffs_Device *dev;
++
++
++	obj = yaffs_DentryToObject(f->f_dentry);
++
++	dev = obj->myDev;
++
++	yaffs_GrossLock(dev);
++
++
++	yaffs_GrossUnlock(dev);
++}
++
+ static int yaffs_readdir(struct file *f, void *dirent, filldir_t filldir)
+ {
+ 	yaffs_Object *obj;
+ 	yaffs_Device *dev;
+ 	struct inode *inode = f->f_dentry->d_inode;
+ 	unsigned long offset, curoffs;
+-	struct list_head *i;
++	struct ylist_head *i;
+ 	yaffs_Object *l;
+ 
+ 	char name[YAFFS_MAX_NAME_LENGTH + 1];
+@@ -932,24 +1141,20 @@ static int yaffs_readdir(struct file *f,
+ 
+ 	if (offset == 0) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_readdir: entry . ino %d \n",
+-		   (int)inode->i_ino));
+-		if (filldir(dirent, ".", 1, offset, inode->i_ino, DT_DIR)
+-		    < 0) {
++			("yaffs_readdir: entry . ino %d \n",
++			(int)inode->i_ino));
++		if (filldir(dirent, ".", 1, offset, inode->i_ino, DT_DIR) < 0)
+ 			goto out;
+-		}
+ 		offset++;
+ 		f->f_pos++;
+ 	}
+ 	if (offset == 1) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_readdir: entry .. ino %d \n",
+-		   (int)f->f_dentry->d_parent->d_inode->i_ino));
+-		if (filldir
+-		    (dirent, "..", 2, offset,
+-		     f->f_dentry->d_parent->d_inode->i_ino, DT_DIR) < 0) {
++			("yaffs_readdir: entry .. ino %d \n",
++			(int)f->f_dentry->d_parent->d_inode->i_ino));
++		if (filldir(dirent, "..", 2, offset,
++			f->f_dentry->d_parent->d_inode->i_ino, DT_DIR) < 0)
+ 			goto out;
+-		}
+ 		offset++;
+ 		f->f_pos++;
+ 	}
+@@ -965,35 +1170,32 @@ static int yaffs_readdir(struct file *f,
+ 		f->f_version = inode->i_version;
+ 	}
+ 
+-	list_for_each(i, &obj->variant.directoryVariant.children) {
++	ylist_for_each(i, &obj->variant.directoryVariant.children) {
+ 		curoffs++;
+ 		if (curoffs >= offset) {
+-			l = list_entry(i, yaffs_Object, siblings);
++			l = ylist_entry(i, yaffs_Object, siblings);
+ 
+ 			yaffs_GetObjectName(l, name,
+ 					    YAFFS_MAX_NAME_LENGTH + 1);
+ 			T(YAFFS_TRACE_OS,
+-			  (KERN_DEBUG "yaffs_readdir: %s inode %d\n", name,
++			  ("yaffs_readdir: %s inode %d\n", name,
+ 			   yaffs_GetObjectInode(l)));
+ 
+ 			if (filldir(dirent,
+-				    name,
+-				    strlen(name),
+-				    offset,
+-				    yaffs_GetObjectInode(l),
+-				    yaffs_GetObjectType(l))
+-			    < 0) {
++					name,
++					strlen(name),
++					offset,
++					yaffs_GetObjectInode(l),
++					yaffs_GetObjectType(l)) < 0)
+ 				goto up_and_out;
+-			}
+ 
+ 			offset++;
+ 			f->f_pos++;
+ 		}
+ 	}
+ 
+-      up_and_out:
+-      out:
+-
++up_and_out:
++out:
+ 	yaffs_GrossUnlock(dev);
+ 
+ 	return 0;
+@@ -1002,12 +1204,19 @@ static int yaffs_readdir(struct file *f,
+ /*
+  * File creation. Allocate an inode, and we're done..
+  */
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29)
++#define YCRED(x) x
++#else
++#define YCRED(x) (x->cred)
++#endif
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode,
+-		       dev_t rdev)
++			dev_t rdev)
+ #else
+ static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode,
+-		       int rdev)
++			int rdev)
+ #endif
+ {
+ 	struct inode *inode;
+@@ -1018,25 +1227,25 @@ static int yaffs_mknod(struct inode *dir
+ 	yaffs_Object *parent = yaffs_InodeToObject(dir);
+ 
+ 	int error = -ENOSPC;
+-	uid_t uid = current->fsuid;
+-	gid_t gid = (dir->i_mode & S_ISGID) ? dir->i_gid : current->fsgid;
++	uid_t uid = YCRED(current)->fsuid;
++	gid_t gid = (dir->i_mode & S_ISGID) ? dir->i_gid : YCRED(current)->fsgid;
+ 
+-	if((dir->i_mode & S_ISGID) && S_ISDIR(mode))
++	if ((dir->i_mode & S_ISGID) && S_ISDIR(mode))
+ 		mode |= S_ISGID;
+ 
+ 	if (parent) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_mknod: parent object %d type %d\n",
+-		   parent->objectId, parent->variantType));
++			("yaffs_mknod: parent object %d type %d\n",
++			parent->objectId, parent->variantType));
+ 	} else {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_mknod: could not get parent object\n"));
++			("yaffs_mknod: could not get parent object\n"));
+ 		return -EPERM;
+ 	}
+ 
+ 	T(YAFFS_TRACE_OS, ("yaffs_mknod: making oject for %s, "
+-			   "mode %x dev %x\n",
+-			   dentry->d_name.name, mode, rdev));
++			"mode %x dev %x\n",
++			dentry->d_name.name, mode, rdev));
+ 
+ 	dev = parent->myDev;
+ 
+@@ -1045,33 +1254,28 @@ static int yaffs_mknod(struct inode *dir
+ 	switch (mode & S_IFMT) {
+ 	default:
+ 		/* Special (socket, fifo, device...) */
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG
+-				   "yaffs_mknod: making special\n"));
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+-		obj =
+-		    yaffs_MknodSpecial(parent, dentry->d_name.name, mode, uid,
+-				       gid, old_encode_dev(rdev));
+-#else
+-		obj =
+-		    yaffs_MknodSpecial(parent, dentry->d_name.name, mode, uid,
+-				       gid, rdev);
++		T(YAFFS_TRACE_OS, ("yaffs_mknod: making special\n"));
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
++		obj = yaffs_MknodSpecial(parent, dentry->d_name.name, mode, uid,
++				gid, old_encode_dev(rdev));
++#else
++		obj = yaffs_MknodSpecial(parent, dentry->d_name.name, mode, uid,
++				gid, rdev);
+ #endif
+ 		break;
+ 	case S_IFREG:		/* file          */
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_mknod: making file\n"));
+-		obj =
+-		    yaffs_MknodFile(parent, dentry->d_name.name, mode, uid,
+-				    gid);
++		T(YAFFS_TRACE_OS, ("yaffs_mknod: making file\n"));
++		obj = yaffs_MknodFile(parent, dentry->d_name.name, mode, uid,
++				gid);
+ 		break;
+ 	case S_IFDIR:		/* directory */
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_mknod: making directory\n"));
+-		obj =
+-		    yaffs_MknodDirectory(parent, dentry->d_name.name, mode,
+-					 uid, gid);
++			("yaffs_mknod: making directory\n"));
++		obj = yaffs_MknodDirectory(parent, dentry->d_name.name, mode,
++					uid, gid);
+ 		break;
+ 	case S_IFLNK:		/* symlink */
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_mknod: making file\n"));
++		T(YAFFS_TRACE_OS, ("yaffs_mknod: making symlink\n"));
+ 		obj = NULL;	/* Do we ever get here? */
+ 		break;
+ 	}
+@@ -1083,12 +1287,12 @@ static int yaffs_mknod(struct inode *dir
+ 		inode = yaffs_get_inode(dir->i_sb, mode, rdev, obj);
+ 		d_instantiate(dentry, inode);
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_mknod created object %d count = %d\n",
+-		   obj->objectId, atomic_read(&inode->i_count)));
++			("yaffs_mknod created object %d count = %d\n",
++			obj->objectId, atomic_read(&inode->i_count)));
+ 		error = 0;
+ 	} else {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_mknod failed making object\n"));
++			("yaffs_mknod failed making object\n"));
+ 		error = -ENOMEM;
+ 	}
+ 
+@@ -1098,25 +1302,19 @@ static int yaffs_mknod(struct inode *dir
+ static int yaffs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
+ {
+ 	int retVal;
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_mkdir\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_mkdir\n"));
+ 	retVal = yaffs_mknod(dir, dentry, mode | S_IFDIR, 0);
+-#if 0
+-	/* attempt to fix dir bug - didn't work */
+-	if (!retVal) {
+-		dget(dentry);
+-	}
+-#endif
+ 	return retVal;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode,
+ 			struct nameidata *n)
+ #else
+ static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode)
+ #endif
+ {
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_create\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_create\n"));
+ 	return yaffs_mknod(dir, dentry, mode | S_IFREG, 0);
+ }
+ 
+@@ -1127,8 +1325,8 @@ static int yaffs_unlink(struct inode *di
+ 	yaffs_Device *dev;
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_unlink %d:%s\n", (int)(dir->i_ino),
+-	   dentry->d_name.name));
++		("yaffs_unlink %d:%s\n", (int)(dir->i_ino),
++		dentry->d_name.name));
+ 
+ 	dev = yaffs_InodeToObject(dir)->myDev;
+ 
+@@ -1151,82 +1349,74 @@ static int yaffs_unlink(struct inode *di
+  * Create a link...
+  */
+ static int yaffs_link(struct dentry *old_dentry, struct inode *dir,
+-		      struct dentry *dentry)
++			struct dentry *dentry)
+ {
+ 	struct inode *inode = old_dentry->d_inode;
+ 	yaffs_Object *obj = NULL;
+ 	yaffs_Object *link = NULL;
+ 	yaffs_Device *dev;
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_link\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_link\n"));
+ 
+ 	obj = yaffs_InodeToObject(inode);
+ 	dev = obj->myDev;
+ 
+ 	yaffs_GrossLock(dev);
+ 
+-	if (!S_ISDIR(inode->i_mode))	/* Don't link directories */
+-	{
+-		link =
+-		    yaffs_Link(yaffs_InodeToObject(dir), dentry->d_name.name,
+-			       obj);
+-	}
++	if (!S_ISDIR(inode->i_mode))		/* Don't link directories */
++		link = yaffs_Link(yaffs_InodeToObject(dir), dentry->d_name.name,
++			obj);
+ 
+ 	if (link) {
+ 		old_dentry->d_inode->i_nlink = yaffs_GetObjectLinkCount(obj);
+ 		d_instantiate(dentry, old_dentry->d_inode);
+ 		atomic_inc(&old_dentry->d_inode->i_count);
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_link link count %d i_count %d\n",
+-		   old_dentry->d_inode->i_nlink,
+-		   atomic_read(&old_dentry->d_inode->i_count)));
+-
++			("yaffs_link link count %d i_count %d\n",
++			old_dentry->d_inode->i_nlink,
++			atomic_read(&old_dentry->d_inode->i_count)));
+ 	}
+ 
+ 	yaffs_GrossUnlock(dev);
+ 
+-	if (link) {
+-
++	if (link)
+ 		return 0;
+-	}
+ 
+ 	return -EPERM;
+ }
+ 
+ static int yaffs_symlink(struct inode *dir, struct dentry *dentry,
+-			 const char *symname)
++				const char *symname)
+ {
+ 	yaffs_Object *obj;
+ 	yaffs_Device *dev;
+-	uid_t uid = current->fsuid;
+-	gid_t gid = (dir->i_mode & S_ISGID) ? dir->i_gid : current->fsgid;
++	uid_t uid = YCRED(current)->fsuid;
++	gid_t gid = (dir->i_mode & S_ISGID) ? dir->i_gid : YCRED(current)->fsgid;
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_symlink\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_symlink\n"));
+ 
+ 	dev = yaffs_InodeToObject(dir)->myDev;
+ 	yaffs_GrossLock(dev);
+ 	obj = yaffs_MknodSymLink(yaffs_InodeToObject(dir), dentry->d_name.name,
+-				 S_IFLNK | S_IRWXUGO, uid, gid, symname);
++				S_IFLNK | S_IRWXUGO, uid, gid, symname);
+ 	yaffs_GrossUnlock(dev);
+ 
+ 	if (obj) {
+-
+ 		struct inode *inode;
+ 
+ 		inode = yaffs_get_inode(dir->i_sb, obj->yst_mode, 0, obj);
+ 		d_instantiate(dentry, inode);
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG "symlink created OK\n"));
++		T(YAFFS_TRACE_OS, ("symlink created OK\n"));
+ 		return 0;
+ 	} else {
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG "symlink not created\n"));
+-
++		T(YAFFS_TRACE_OS, ("symlink not created\n"));
+ 	}
+ 
+ 	return -ENOMEM;
+ }
+ 
+ static int yaffs_sync_object(struct file *file, struct dentry *dentry,
+-			     int datasync)
++				int datasync)
+ {
+ 
+ 	yaffs_Object *obj;
+@@ -1236,7 +1426,7 @@ static int yaffs_sync_object(struct file
+ 
+ 	dev = obj->myDev;
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_sync_object\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_sync_object\n"));
+ 	yaffs_GrossLock(dev);
+ 	yaffs_FlushFile(obj, 1);
+ 	yaffs_GrossUnlock(dev);
+@@ -1255,41 +1445,36 @@ static int yaffs_rename(struct inode *ol
+ 	int retVal = YAFFS_FAIL;
+ 	yaffs_Object *target;
+ 
+-        T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_rename\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_rename\n"));
+ 	dev = yaffs_InodeToObject(old_dir)->myDev;
+ 
+ 	yaffs_GrossLock(dev);
+ 
+ 	/* Check if the target is an existing directory that is not empty. */
+-	target =
+-	    yaffs_FindObjectByName(yaffs_InodeToObject(new_dir),
+-				   new_dentry->d_name.name);
++	target = yaffs_FindObjectByName(yaffs_InodeToObject(new_dir),
++				new_dentry->d_name.name);
+ 
+ 
+ 
+-	if (target &&
+-	    target->variantType == YAFFS_OBJECT_TYPE_DIRECTORY &&
+-	    !list_empty(&target->variant.directoryVariant.children)) {
++	if (target && target->variantType == YAFFS_OBJECT_TYPE_DIRECTORY &&
++		!ylist_empty(&target->variant.directoryVariant.children)) {
+ 
+-	        T(YAFFS_TRACE_OS, (KERN_DEBUG "target is non-empty dir\n"));
++		T(YAFFS_TRACE_OS, ("target is non-empty dir\n"));
+ 
+ 		retVal = YAFFS_FAIL;
+ 	} else {
+-
+ 		/* Now does unlinking internally using shadowing mechanism */
+-	        T(YAFFS_TRACE_OS, (KERN_DEBUG "calling yaffs_RenameObject\n"));
+-
+-		retVal =
+-		    yaffs_RenameObject(yaffs_InodeToObject(old_dir),
+-				       old_dentry->d_name.name,
+-				       yaffs_InodeToObject(new_dir),
+-				       new_dentry->d_name.name);
++		T(YAFFS_TRACE_OS, ("calling yaffs_RenameObject\n"));
+ 
++		retVal = yaffs_RenameObject(yaffs_InodeToObject(old_dir),
++				old_dentry->d_name.name,
++				yaffs_InodeToObject(new_dir),
++				new_dentry->d_name.name);
+ 	}
+ 	yaffs_GrossUnlock(dev);
+ 
+ 	if (retVal == YAFFS_OK) {
+-		if(target) {
++		if (target) {
+ 			new_dentry->d_inode->i_nlink--;
+ 			mark_inode_dirty(new_dentry->d_inode);
+ 		}
+@@ -1298,7 +1483,6 @@ static int yaffs_rename(struct inode *ol
+ 	} else {
+ 		return -ENOTEMPTY;
+ 	}
+-
+ }
+ 
+ static int yaffs_setattr(struct dentry *dentry, struct iattr *attr)
+@@ -1308,15 +1492,15 @@ static int yaffs_setattr(struct dentry *
+ 	yaffs_Device *dev;
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_setattr of object %d\n",
+-	   yaffs_InodeToObject(inode)->objectId));
+-
+-	if ((error = inode_change_ok(inode, attr)) == 0) {
++		("yaffs_setattr of object %d\n",
++		yaffs_InodeToObject(inode)->objectId));
+ 
++	error = inode_change_ok(inode, attr);
++	if (error == 0) {
+ 		dev = yaffs_InodeToObject(inode)->myDev;
+ 		yaffs_GrossLock(dev);
+ 		if (yaffs_SetAttributes(yaffs_InodeToObject(inode), attr) ==
+-		    YAFFS_OK) {
++				YAFFS_OK) {
+ 			error = 0;
+ 		} else {
+ 			error = -EPERM;
+@@ -1328,12 +1512,12 @@ static int yaffs_setattr(struct dentry *
+ 	return error;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_statfs(struct dentry *dentry, struct kstatfs *buf)
+ {
+ 	yaffs_Device *dev = yaffs_DentryToObject(dentry)->myDev;
+ 	struct super_block *sb = dentry->d_sb;
+-#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_statfs(struct super_block *sb, struct kstatfs *buf)
+ {
+ 	yaffs_Device *dev = yaffs_SuperToDevice(sb);
+@@ -1343,32 +1527,53 @@ static int yaffs_statfs(struct super_blo
+ 	yaffs_Device *dev = yaffs_SuperToDevice(sb);
+ #endif
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_statfs\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_statfs\n"));
+ 
+ 	yaffs_GrossLock(dev);
+ 
+ 	buf->f_type = YAFFS_MAGIC;
+ 	buf->f_bsize = sb->s_blocksize;
+ 	buf->f_namelen = 255;
+-	if (sb->s_blocksize > dev->nDataBytesPerChunk) {
++
++	if (dev->nDataBytesPerChunk & (dev->nDataBytesPerChunk - 1)) {
++		/* Do this if chunk size is not a power of 2 */
++
++		uint64_t bytesInDev;
++		uint64_t bytesFree;
++
++		bytesInDev = ((uint64_t)((dev->endBlock - dev->startBlock + 1))) *
++			((uint64_t)(dev->nChunksPerBlock * dev->nDataBytesPerChunk));
++
++		do_div(bytesInDev, sb->s_blocksize); /* bytesInDev becomes the number of blocks */
++		buf->f_blocks = bytesInDev;
++
++		bytesFree  = ((uint64_t)(yaffs_GetNumberOfFreeChunks(dev))) *
++			((uint64_t)(dev->nDataBytesPerChunk));
++
++		do_div(bytesFree, sb->s_blocksize);
++
++		buf->f_bfree = bytesFree;
++
++	} else if (sb->s_blocksize > dev->nDataBytesPerChunk) {
+ 
+ 		buf->f_blocks =
+-		    (dev->endBlock - dev->startBlock +
+-		     1) * dev->nChunksPerBlock / (sb->s_blocksize /
+-						  dev->nDataBytesPerChunk);
++			(dev->endBlock - dev->startBlock + 1) *
++			dev->nChunksPerBlock /
++			(sb->s_blocksize / dev->nDataBytesPerChunk);
+ 		buf->f_bfree =
+-		    yaffs_GetNumberOfFreeChunks(dev) / (sb->s_blocksize /
+-							dev->nDataBytesPerChunk);
++			yaffs_GetNumberOfFreeChunks(dev) /
++			(sb->s_blocksize / dev->nDataBytesPerChunk);
+ 	} else {
+-
+ 		buf->f_blocks =
+-		    (dev->endBlock - dev->startBlock +
+-		     1) * dev->nChunksPerBlock * (dev->nDataBytesPerChunk /
+-						  sb->s_blocksize);
++			(dev->endBlock - dev->startBlock + 1) *
++			dev->nChunksPerBlock *
++			(dev->nDataBytesPerChunk / sb->s_blocksize);
++
+ 		buf->f_bfree =
+-		    yaffs_GetNumberOfFreeChunks(dev) * (dev->nDataBytesPerChunk /
+-							sb->s_blocksize);
++			yaffs_GetNumberOfFreeChunks(dev) *
++			(dev->nDataBytesPerChunk / sb->s_blocksize);
+ 	}
++
+ 	buf->f_files = 0;
+ 	buf->f_ffree = 0;
+ 	buf->f_bavail = buf->f_bfree;
+@@ -1378,18 +1583,19 @@ static int yaffs_statfs(struct super_blo
+ }
+ 
+ 
+-/**
+ static int yaffs_do_sync_fs(struct super_block *sb)
+ {
+ 
+ 	yaffs_Device *dev = yaffs_SuperToDevice(sb);
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_do_sync_fs\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_do_sync_fs\n"));
+ 
+-	if(sb->s_dirt) {
++	if (sb->s_dirt) {
+ 		yaffs_GrossLock(dev);
+ 
+-		if(dev)
++		if (dev) {
++			yaffs_FlushEntireDeviceCache(dev);
+ 			yaffs_CheckpointSave(dev);
++		}
+ 
+ 		yaffs_GrossUnlock(dev);
+ 
+@@ -1397,35 +1603,73 @@ static int yaffs_do_sync_fs(struct super
+ 	}
+ 	return 0;
+ }
+-**/
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static void yaffs_write_super(struct super_block *sb)
+ #else
+ static int yaffs_write_super(struct super_block *sb)
+ #endif
+ {
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_write_super\n"));
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18))
+-	return 0; /* yaffs_do_sync_fs(sb);*/
++	T(YAFFS_TRACE_OS, ("yaffs_write_super\n"));
++	if (yaffs_auto_checkpoint >= 2)
++		yaffs_do_sync_fs(sb);
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 18))
++	return 0;
+ #endif
+ }
+ 
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_sync_fs(struct super_block *sb, int wait)
+ #else
+ static int yaffs_sync_fs(struct super_block *sb)
+ #endif
+ {
++	T(YAFFS_TRACE_OS, ("yaffs_sync_fs\n"));
++
++	if (yaffs_auto_checkpoint >= 1)
++		yaffs_do_sync_fs(sb);
++
++	return 0;
++}
++
++#ifdef YAFFS_USE_OWN_IGET
++
++static struct inode *yaffs_iget(struct super_block *sb, unsigned long ino)
++{
++	struct inode *inode;
++	yaffs_Object *obj;
++	yaffs_Device *dev = yaffs_SuperToDevice(sb);
++
++	T(YAFFS_TRACE_OS,
++		("yaffs_iget for %lu\n", ino));
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_sync_fs\n"));
++	inode = iget_locked(sb, ino);
++	if (!inode)
++		return ERR_PTR(-ENOMEM);
++	if (!(inode->i_state & I_NEW))
++		return inode;
++
++	/* NB This is called as a side effect of other functions, but
++	 * we had to release the lock to prevent deadlocks, so
++	 * need to lock again.
++	 */
+ 
+-	return 0; /* yaffs_do_sync_fs(sb);*/
++	yaffs_GrossLock(dev);
+ 
++	obj = yaffs_FindObjectByNumber(dev, inode->i_ino);
++
++	yaffs_FillInodeFromObject(inode, obj);
++
++	yaffs_GrossUnlock(dev);
++
++	unlock_new_inode(inode);
++	return inode;
+ }
+ 
++#else
+ 
+ static void yaffs_read_inode(struct inode *inode)
+ {
+@@ -1438,7 +1682,7 @@ static void yaffs_read_inode(struct inod
+ 	yaffs_Device *dev = yaffs_SuperToDevice(inode->i_sb);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_read_inode for %d\n", (int)inode->i_ino));
++		("yaffs_read_inode for %d\n", (int)inode->i_ino));
+ 
+ 	yaffs_GrossLock(dev);
+ 
+@@ -1449,18 +1693,20 @@ static void yaffs_read_inode(struct inod
+ 	yaffs_GrossUnlock(dev);
+ }
+ 
+-static LIST_HEAD(yaffs_dev_list);
++#endif
++
++static YLIST_HEAD(yaffs_dev_list);
+ 
+-#if 0 // not used
++#if 0 /* not used */
+ static int yaffs_remount_fs(struct super_block *sb, int *flags, char *data)
+ {
+ 	yaffs_Device    *dev = yaffs_SuperToDevice(sb);
+ 
+-	if( *flags & MS_RDONLY ) {
++	if (*flags & MS_RDONLY) {
+ 		struct mtd_info *mtd = yaffs_SuperToDevice(sb)->genericDevice;
+ 
+ 		T(YAFFS_TRACE_OS,
+-			(KERN_DEBUG "yaffs_remount_fs: %s: RO\n", dev->name ));
++			("yaffs_remount_fs: %s: RO\n", dev->name));
+ 
+ 		yaffs_GrossLock(dev);
+ 
+@@ -1472,10 +1718,9 @@ static int yaffs_remount_fs(struct super
+ 			mtd->sync(mtd);
+ 
+ 		yaffs_GrossUnlock(dev);
+-	}
+-	else {
++	} else {
+ 		T(YAFFS_TRACE_OS,
+-			(KERN_DEBUG "yaffs_remount_fs: %s: RW\n", dev->name ));
++			("yaffs_remount_fs: %s: RW\n", dev->name));
+ 	}
+ 
+ 	return 0;
+@@ -1486,7 +1731,7 @@ static void yaffs_put_super(struct super
+ {
+ 	yaffs_Device *dev = yaffs_SuperToDevice(sb);
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_put_super\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_put_super\n"));
+ 
+ 	yaffs_GrossLock(dev);
+ 
+@@ -1494,18 +1739,17 @@ static void yaffs_put_super(struct super
+ 
+ 	yaffs_CheckpointSave(dev);
+ 
+-	if (dev->putSuperFunc) {
++	if (dev->putSuperFunc)
+ 		dev->putSuperFunc(sb);
+-	}
+ 
+ 	yaffs_Deinitialise(dev);
+ 
+ 	yaffs_GrossUnlock(dev);
+ 
+ 	/* we assume this is protected by lock_kernel() in mount/umount */
+-	list_del(&dev->devList);
++	ylist_del(&dev->devList);
+ 
+-	if(dev->spareBuffer){
++	if (dev->spareBuffer) {
+ 		YFREE(dev->spareBuffer);
+ 		dev->spareBuffer = NULL;
+ 	}
+@@ -1516,12 +1760,10 @@ static void yaffs_put_super(struct super
+ 
+ static void yaffs_MTDPutSuper(struct super_block *sb)
+ {
+-
+ 	struct mtd_info *mtd = yaffs_SuperToDevice(sb)->genericDevice;
+ 
+-	if (mtd->sync) {
++	if (mtd->sync)
+ 		mtd->sync(mtd);
+-	}
+ 
+ 	put_mtd_device(mtd);
+ }
+@@ -1531,9 +1773,9 @@ static void yaffs_MarkSuperBlockDirty(vo
+ {
+ 	struct super_block *sb = (struct super_block *)vsb;
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_MarkSuperBlockDirty() sb = %p\n",sb));
+-//	if(sb)
+-//		sb->s_dirt = 1;
++	T(YAFFS_TRACE_OS, ("yaffs_MarkSuperBlockDirty() sb = %p\n", sb));
++	if (sb)
++		sb->s_dirt = 1;
+ }
+ 
+ typedef struct {
+@@ -1546,48 +1788,48 @@ typedef struct {
+ #define MAX_OPT_LEN 20
+ static int yaffs_parse_options(yaffs_options *options, const char *options_str)
+ {
+-	char cur_opt[MAX_OPT_LEN+1];
++	char cur_opt[MAX_OPT_LEN + 1];
+ 	int p;
+ 	int error = 0;
+ 
+ 	/* Parse through the options which is a comma seperated list */
+ 
+-	while(options_str && *options_str && !error){
+-		memset(cur_opt,0,MAX_OPT_LEN+1);
++	while (options_str && *options_str && !error) {
++		memset(cur_opt, 0, MAX_OPT_LEN + 1);
+ 		p = 0;
+ 
+-		while(*options_str && *options_str != ','){
+-			if(p < MAX_OPT_LEN){
++		while (*options_str && *options_str != ',') {
++			if (p < MAX_OPT_LEN) {
+ 				cur_opt[p] = *options_str;
+ 				p++;
+ 			}
+ 			options_str++;
+ 		}
+ 
+-		if(!strcmp(cur_opt,"inband-tags"))
++		if (!strcmp(cur_opt, "inband-tags"))
+ 			options->inband_tags = 1;
+-		else if(!strcmp(cur_opt,"no-cache"))
++		else if (!strcmp(cur_opt, "no-cache"))
+ 			options->no_cache = 1;
+-		else if(!strcmp(cur_opt,"no-checkpoint-read"))
++		else if (!strcmp(cur_opt, "no-checkpoint-read"))
+ 			options->skip_checkpoint_read = 1;
+-		else if(!strcmp(cur_opt,"no-checkpoint-write"))
++		else if (!strcmp(cur_opt, "no-checkpoint-write"))
+ 			options->skip_checkpoint_write = 1;
+-		else if(!strcmp(cur_opt,"no-checkpoint")){
++		else if (!strcmp(cur_opt, "no-checkpoint")) {
+ 			options->skip_checkpoint_read = 1;
+ 			options->skip_checkpoint_write = 1;
+ 		} else {
+-			printk(KERN_INFO "yaffs: Bad mount option \"%s\"\n",cur_opt);
++			printk(KERN_INFO "yaffs: Bad mount option \"%s\"\n",
++					cur_opt);
+ 			error = 1;
+ 		}
+-
+ 	}
+ 
+ 	return error;
+ }
+ 
+ static struct super_block *yaffs_internal_read_super(int yaffsVersion,
+-						     struct super_block *sb,
+-						     void *data, int silent)
++						struct super_block *sb,
++						void *data, int silent)
+ {
+ 	int nBlocks;
+ 	struct inode *inode = NULL;
+@@ -1602,6 +1844,7 @@ static struct super_block *yaffs_interna
+ 
+ 	sb->s_magic = YAFFS_MAGIC;
+ 	sb->s_op = &yaffs_super_ops;
++	sb->s_flags |= MS_NOATIME;
+ 
+ 	if (!sb)
+ 		printk(KERN_INFO "yaffs: sb is NULL\n");
+@@ -1614,14 +1857,14 @@ static struct super_block *yaffs_interna
+ 		       sb->s_dev,
+ 		       yaffs_devname(sb, devname_buf));
+ 
+-	if(!data_str)
++	if (!data_str)
+ 		data_str = "";
+ 
+-	printk(KERN_INFO "yaffs: passed flags \"%s\"\n",data_str);
++	printk(KERN_INFO "yaffs: passed flags \"%s\"\n", data_str);
+ 
+-	memset(&options,0,sizeof(options));
++	memset(&options, 0, sizeof(options));
+ 
+-	if(yaffs_parse_options(&options,data_str)){
++	if (yaffs_parse_options(&options, data_str)) {
+ 		/* Option parsing failed */
+ 		return NULL;
+ 	}
+@@ -1645,9 +1888,9 @@ static struct super_block *yaffs_interna
+ 			       yaffs_devname(sb, devname_buf)));
+ 
+ 	/* Check it's an mtd device..... */
+-	if (MAJOR(sb->s_dev) != MTD_BLOCK_MAJOR) {
++	if (MAJOR(sb->s_dev) != MTD_BLOCK_MAJOR)
+ 		return NULL;	/* This isn't an mtd device */
+-	}
++
+ 	/* Get the device */
+ 	mtd = get_mtd_device(NULL, MINOR(sb->s_dev));
+ 	if (!mtd) {
+@@ -1673,29 +1916,23 @@ static struct super_block *yaffs_interna
+ 	T(YAFFS_TRACE_OS, (" %s %d\n", WRITE_SIZE_STR, WRITE_SIZE(mtd)));
+ 	T(YAFFS_TRACE_OS, (" oobsize %d\n", mtd->oobsize));
+ 	T(YAFFS_TRACE_OS, (" erasesize %d\n", mtd->erasesize));
+-	T(YAFFS_TRACE_OS, (" size %d\n", mtd->size));
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29)
++	T(YAFFS_TRACE_OS, (" size %u\n", mtd->size));
++#else
++	T(YAFFS_TRACE_OS, (" size %lld\n", mtd->size));
++#endif
+ 
+ #ifdef CONFIG_YAFFS_AUTO_YAFFS2
+ 
+-	if (yaffsVersion == 1 &&
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-	    mtd->writesize >= 2048) {
+-#else
+-	    mtd->oobblock >= 2048) {
+-#endif
+-	    T(YAFFS_TRACE_ALWAYS,("yaffs: auto selecting yaffs2\n"));
+-	    yaffsVersion = 2;
++	if (yaffsVersion == 1 && WRITE_SIZE(mtd) >= 2048) {
++		T(YAFFS_TRACE_ALWAYS, ("yaffs: auto selecting yaffs2\n"));
++		yaffsVersion = 2;
+ 	}
+ 
+ 	/* Added NCB 26/5/2006 for completeness */
+-	if (yaffsVersion == 2 &&
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-	    mtd->writesize == 512) {
+-#else
+-	    mtd->oobblock == 512) {
+-#endif
+-	    T(YAFFS_TRACE_ALWAYS,("yaffs: auto selecting yaffs1\n"));
+-	    yaffsVersion = 1;
++	if (yaffsVersion == 2 && !options.inband_tags && WRITE_SIZE(mtd) == 512) {
++		T(YAFFS_TRACE_ALWAYS, ("yaffs: auto selecting yaffs1\n"));
++		yaffsVersion = 1;
+ 	}
+ 
+ #endif
+@@ -1707,7 +1944,7 @@ static struct super_block *yaffs_interna
+ 		    !mtd->block_markbad ||
+ 		    !mtd->read ||
+ 		    !mtd->write ||
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ 		    !mtd->read_oob || !mtd->write_oob) {
+ #else
+ 		    !mtd->write_ecc ||
+@@ -1719,12 +1956,9 @@ static struct super_block *yaffs_interna
+ 			return NULL;
+ 		}
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-		if (mtd->writesize < YAFFS_MIN_YAFFS2_CHUNK_SIZE ||
+-#else
+-		if (mtd->oobblock < YAFFS_MIN_YAFFS2_CHUNK_SIZE ||
+-#endif
+-		    mtd->oobsize < YAFFS_MIN_YAFFS2_SPARE_SIZE) {
++		if ((WRITE_SIZE(mtd) < YAFFS_MIN_YAFFS2_CHUNK_SIZE ||
++		    mtd->oobsize < YAFFS_MIN_YAFFS2_SPARE_SIZE) &&
++		    !options.inband_tags) {
+ 			T(YAFFS_TRACE_ALWAYS,
+ 			  ("yaffs: MTD device does not have the "
+ 			   "right page sizes\n"));
+@@ -1735,7 +1969,7 @@ static struct super_block *yaffs_interna
+ 		if (!mtd->erase ||
+ 		    !mtd->read ||
+ 		    !mtd->write ||
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ 		    !mtd->read_oob || !mtd->write_oob) {
+ #else
+ 		    !mtd->write_ecc ||
+@@ -1761,7 +1995,7 @@ static struct super_block *yaffs_interna
+ 	 * Set the yaffs_Device up for mtd
+ 	 */
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 	sb->s_fs_info = dev = kmalloc(sizeof(yaffs_Device), GFP_KERNEL);
+ #else
+ 	sb->u.generic_sbp = dev = kmalloc(sizeof(yaffs_Device), GFP_KERNEL);
+@@ -1780,13 +2014,15 @@ static struct super_block *yaffs_interna
+ 
+ 	/* Set up the memory size parameters.... */
+ 
+-	nBlocks = mtd->size / (YAFFS_CHUNKS_PER_BLOCK * YAFFS_BYTES_PER_CHUNK);
++	nBlocks = YCALCBLOCKS(mtd->size, (YAFFS_CHUNKS_PER_BLOCK * YAFFS_BYTES_PER_CHUNK));
++
+ 	dev->startBlock = 0;
+ 	dev->endBlock = nBlocks - 1;
+ 	dev->nChunksPerBlock = YAFFS_CHUNKS_PER_BLOCK;
+-	dev->nDataBytesPerChunk = YAFFS_BYTES_PER_CHUNK;
++	dev->totalBytesPerChunk = YAFFS_BYTES_PER_CHUNK;
+ 	dev->nReservedBlocks = 5;
+ 	dev->nShortOpCaches = (options.no_cache) ? 0 : 10;
++	dev->inbandTags = options.inband_tags;
+ 
+ 	/* ... and the functions. */
+ 	if (yaffsVersion == 2) {
+@@ -1798,20 +2034,19 @@ static struct super_block *yaffs_interna
+ 		dev->queryNANDBlock = nandmtd2_QueryNANDBlock;
+ 		dev->spareBuffer = YMALLOC(mtd->oobsize);
+ 		dev->isYaffs2 = 1;
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-		dev->nDataBytesPerChunk = mtd->writesize;
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
++		dev->totalBytesPerChunk = mtd->writesize;
+ 		dev->nChunksPerBlock = mtd->erasesize / mtd->writesize;
+ #else
+-		dev->nDataBytesPerChunk = mtd->oobblock;
++		dev->totalBytesPerChunk = mtd->oobblock;
+ 		dev->nChunksPerBlock = mtd->erasesize / mtd->oobblock;
+ #endif
+-		nBlocks = mtd->size / mtd->erasesize;
++		nBlocks = YCALCBLOCKS(mtd->size, mtd->erasesize);
+ 
+-		dev->nCheckpointReservedBlocks = CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS;
+ 		dev->startBlock = 0;
+ 		dev->endBlock = nBlocks - 1;
+ 	} else {
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ 		/* use the MTD interface in yaffs_mtdif1.c */
+ 		dev->writeChunkWithTagsToNAND =
+ 			nandmtd1_WriteChunkWithTagsToNAND;
+@@ -1847,7 +2082,7 @@ static struct super_block *yaffs_interna
+ 	dev->skipCheckpointWrite = options.skip_checkpoint_write;
+ 
+ 	/* we assume this is protected by lock_kernel() in mount/umount */
+-	list_add_tail(&dev->devList, &yaffs_dev_list);
++	ylist_add_tail(&dev->devList, &yaffs_dev_list);
+ 
+ 	init_MUTEX(&dev->grossLock);
+ 
+@@ -1884,20 +2119,23 @@ static struct super_block *yaffs_interna
+ 		return NULL;
+ 	}
+ 	sb->s_root = root;
++	sb->s_dirt = !dev->isCheckpointed;
++	T(YAFFS_TRACE_ALWAYS,
++	  ("yaffs_read_super: isCheckpointed %d\n", dev->isCheckpointed));
+ 
+ 	T(YAFFS_TRACE_OS, ("yaffs_read_super: done\n"));
+ 	return sb;
+ }
+ 
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_internal_read_super_mtd(struct super_block *sb, void *data,
+ 					 int silent)
+ {
+ 	return yaffs_internal_read_super(1, sb, data, silent) ? 0 : -EINVAL;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_read_super(struct file_system_type *fs,
+ 			    int flags, const char *dev_name,
+ 			    void *data, struct vfsmount *mnt)
+@@ -1938,14 +2176,14 @@ static DECLARE_FSTYPE(yaffs_fs_type, "ya
+ 
+ #ifdef CONFIG_YAFFS_YAFFS2
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs2_internal_read_super_mtd(struct super_block *sb, void *data,
+ 					  int silent)
+ {
+ 	return yaffs_internal_read_super(2, sb, data, silent) ? 0 : -EINVAL;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs2_read_super(struct file_system_type *fs,
+ 			int flags, const char *dev_name, void *data,
+ 			struct vfsmount *mnt)
+@@ -1990,12 +2228,12 @@ static char *yaffs_dump_dev(char *buf, y
+ {
+ 	buf += sprintf(buf, "startBlock......... %d\n", dev->startBlock);
+ 	buf += sprintf(buf, "endBlock........... %d\n", dev->endBlock);
++	buf += sprintf(buf, "totalBytesPerChunk. %d\n", dev->totalBytesPerChunk);
+ 	buf += sprintf(buf, "nDataBytesPerChunk. %d\n", dev->nDataBytesPerChunk);
+ 	buf += sprintf(buf, "chunkGroupBits..... %d\n", dev->chunkGroupBits);
+ 	buf += sprintf(buf, "chunkGroupSize..... %d\n", dev->chunkGroupSize);
+ 	buf += sprintf(buf, "nErasedBlocks...... %d\n", dev->nErasedBlocks);
+ 	buf += sprintf(buf, "nReservedBlocks.... %d\n", dev->nReservedBlocks);
+-	buf += sprintf(buf, "nCheckptResBlocks.. %d\n", dev->nCheckpointReservedBlocks);
+ 	buf += sprintf(buf, "blocksInCheckpoint. %d\n", dev->blocksInCheckpoint);
+ 	buf += sprintf(buf, "nTnodesCreated..... %d\n", dev->nTnodesCreated);
+ 	buf += sprintf(buf, "nFreeTnodes........ %d\n", dev->nFreeTnodes);
+@@ -2006,10 +2244,8 @@ static char *yaffs_dump_dev(char *buf, y
+ 	buf += sprintf(buf, "nPageReads......... %d\n", dev->nPageReads);
+ 	buf += sprintf(buf, "nBlockErasures..... %d\n", dev->nBlockErasures);
+ 	buf += sprintf(buf, "nGCCopies.......... %d\n", dev->nGCCopies);
+-	buf +=
+-	    sprintf(buf, "garbageCollections. %d\n", dev->garbageCollections);
+-	buf +=
+-	    sprintf(buf, "passiveGCs......... %d\n",
++	buf += sprintf(buf, "garbageCollections. %d\n", dev->garbageCollections);
++	buf += sprintf(buf, "passiveGCs......... %d\n",
+ 		    dev->passiveGarbageCollections);
+ 	buf += sprintf(buf, "nRetriedWrites..... %d\n", dev->nRetriedWrites);
+ 	buf += sprintf(buf, "nShortOpCaches..... %d\n", dev->nShortOpCaches);
+@@ -2025,6 +2261,7 @@ static char *yaffs_dump_dev(char *buf, y
+ 	    sprintf(buf, "nBackgroudDeletions %d\n", dev->nBackgroundDeletions);
+ 	buf += sprintf(buf, "useNANDECC......... %d\n", dev->useNANDECC);
+ 	buf += sprintf(buf, "isYaffs2........... %d\n", dev->isYaffs2);
++	buf += sprintf(buf, "inbandTags......... %d\n", dev->inbandTags);
+ 
+ 	return buf;
+ }
+@@ -2033,7 +2270,7 @@ static int yaffs_proc_read(char *page,
+ 			   char **start,
+ 			   off_t offset, int count, int *eof, void *data)
+ {
+-	struct list_head *item;
++	struct ylist_head *item;
+ 	char *buf = page;
+ 	int step = offset;
+ 	int n = 0;
+@@ -2057,8 +2294,8 @@ static int yaffs_proc_read(char *page,
+ 	lock_kernel();
+ 
+ 	/* Locate and print the Nth entry.  Order N-squared but N is small. */
+-	list_for_each(item, &yaffs_dev_list) {
+-		yaffs_Device *dev = list_entry(item, yaffs_Device, devList);
++	ylist_for_each(item, &yaffs_dev_list) {
++		yaffs_Device *dev = ylist_entry(item, yaffs_Device, devList);
+ 		if (n < step) {
+ 			n++;
+ 			continue;
+@@ -2119,7 +2356,7 @@ static int yaffs_proc_write(struct file
+ 	char *end;
+ 	char *mask_name;
+ 	const char *x;
+-	char substring[MAX_MASK_NAME_LENGTH+1];
++	char substring[MAX_MASK_NAME_LENGTH + 1];
+ 	int i;
+ 	int done = 0;
+ 	int add, len = 0;
+@@ -2129,9 +2366,8 @@ static int yaffs_proc_write(struct file
+ 
+ 	while (!done && (pos < count)) {
+ 		done = 1;
+-		while ((pos < count) && isspace(buf[pos])) {
++		while ((pos < count) && isspace(buf[pos]))
+ 			pos++;
+-		}
+ 
+ 		switch (buf[pos]) {
+ 		case '+':
+@@ -2148,20 +2384,21 @@ static int yaffs_proc_write(struct file
+ 		mask_name = NULL;
+ 
+ 		mask_bitfield = simple_strtoul(buf + pos, &end, 0);
++
+ 		if (end > buf + pos) {
+ 			mask_name = "numeral";
+ 			len = end - (buf + pos);
+ 			pos += len;
+ 			done = 0;
+ 		} else {
+-			for(x = buf + pos, i = 0;
+-			    (*x == '_' || (*x >='a' && *x <= 'z')) &&
+-			    i <MAX_MASK_NAME_LENGTH; x++, i++, pos++)
+-			    substring[i] = *x;
++			for (x = buf + pos, i = 0;
++			    (*x == '_' || (*x >= 'a' && *x <= 'z')) &&
++			    i < MAX_MASK_NAME_LENGTH; x++, i++, pos++)
++				substring[i] = *x;
+ 			substring[i] = '\0';
+ 
+ 			for (i = 0; mask_flags[i].mask_name != NULL; i++) {
+-				if(strcmp(substring,mask_flags[i].mask_name) == 0){
++				if (strcmp(substring, mask_flags[i].mask_name) == 0) {
+ 					mask_name = mask_flags[i].mask_name;
+ 					mask_bitfield = mask_flags[i].mask_bitfield;
+ 					done = 0;
+@@ -2172,7 +2409,7 @@ static int yaffs_proc_write(struct file
+ 
+ 		if (mask_name != NULL) {
+ 			done = 0;
+-			switch(add) {
++			switch (add) {
+ 			case '-':
+ 				rg &= ~mask_bitfield;
+ 				break;
+@@ -2191,13 +2428,13 @@ static int yaffs_proc_write(struct file
+ 
+ 	yaffs_traceMask = rg | YAFFS_TRACE_ALWAYS;
+ 
+-	printk("new trace = 0x%08X\n",yaffs_traceMask);
++	printk(KERN_DEBUG "new trace = 0x%08X\n", yaffs_traceMask);
+ 
+ 	if (rg & YAFFS_TRACE_ALWAYS) {
+ 		for (i = 0; mask_flags[i].mask_name != NULL; i++) {
+ 			char flag;
+ 			flag = ((rg & mask_flags[i].mask_bitfield) == mask_flags[i].mask_bitfield) ? '+' : '-';
+-			printk("%c%s\n", flag, mask_flags[i].mask_name);
++			printk(KERN_DEBUG "%c%s\n", flag, mask_flags[i].mask_name);
+ 		}
+ 	}
+ 
+@@ -2211,12 +2448,8 @@ struct file_system_to_install {
+ };
+ 
+ static struct file_system_to_install fs_to_install[] = {
+-//#ifdef CONFIG_YAFFS_YAFFS1
+ 	{&yaffs_fs_type, 0},
+-//#endif
+-//#ifdef CONFIG_YAFFS_YAFFS2
+ 	{&yaffs2_fs_type, 0},
+-//#endif
+ 	{NULL, 0}
+ };
+ 
+@@ -2231,15 +2464,14 @@ static int __init init_yaffs_fs(void)
+ 	/* Install the proc_fs entry */
+ 	my_proc_entry = create_proc_entry("yaffs",
+ 					       S_IRUGO | S_IFREG,
+-					       &proc_root);
++					       YPROC_ROOT);
+ 
+ 	if (my_proc_entry) {
+ 		my_proc_entry->write_proc = yaffs_proc_write;
+ 		my_proc_entry->read_proc = yaffs_proc_read;
+ 		my_proc_entry->data = NULL;
+-	} else {
++	} else
+ 		return -ENOMEM;
+-	}
+ 
+ 	/* Now add the file system entries */
+ 
+@@ -2247,9 +2479,8 @@ static int __init init_yaffs_fs(void)
+ 
+ 	while (fsinst->fst && !error) {
+ 		error = register_filesystem(fsinst->fst);
+-		if (!error) {
++		if (!error)
+ 			fsinst->installed = 1;
+-		}
+ 		fsinst++;
+ 	}
+ 
+@@ -2277,7 +2508,7 @@ static void __exit exit_yaffs_fs(void)
+ 	T(YAFFS_TRACE_ALWAYS, ("yaffs " __DATE__ " " __TIME__
+ 			       " removing. \n"));
+ 
+-	remove_proc_entry("yaffs", &proc_root);
++	remove_proc_entry("yaffs", YPROC_ROOT);
+ 
+ 	fsinst = fs_to_install;
+ 
+@@ -2288,7 +2519,6 @@ static void __exit exit_yaffs_fs(void)
+ 		}
+ 		fsinst++;
+ 	}
+-
+ }
+ 
+ module_init(init_yaffs_fs)
+--- /dev/null
++++ b/fs/yaffs2/yaffs_getblockinfo.h
+@@ -0,0 +1,34 @@
++/*
++ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
++ *
++ * Copyright (C) 2002-2007 Aleph One Ltd.
++ *   for Toby Churchill Ltd and Brightstar Engineering
++ *
++ * Created by Charles Manning <charles@aleph1.co.uk>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU Lesser General Public License version 2.1 as
++ * published by the Free Software Foundation.
++ *
++ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
++ */
++
++#ifndef __YAFFS_GETBLOCKINFO_H__
++#define __YAFFS_GETBLOCKINFO_H__
++
++#include "yaffs_guts.h"
++
++/* Function to manipulate block info */
++static Y_INLINE yaffs_BlockInfo *yaffs_GetBlockInfo(yaffs_Device * dev, int blk)
++{
++	if (blk < dev->internalStartBlock || blk > dev->internalEndBlock) {
++		T(YAFFS_TRACE_ERROR,
++		  (TSTR
++		   ("**>> yaffs: getBlockInfo block %d is not valid" TENDSTR),
++		   blk));
++		YBUG();
++	}
++	return &dev->blockInfo[blk - dev->internalStartBlock];
++}
++
++#endif
+--- a/fs/yaffs2/yaffs_guts.c
++++ b/fs/yaffs2/yaffs_guts.c
+@@ -12,16 +12,17 @@
+  */
+ 
+ const char *yaffs_guts_c_version =
+-    "$Id: yaffs_guts.c,v 1.49 2007-05-15 20:07:40 charles Exp $";
++    "$Id: yaffs_guts.c,v 1.82 2009-03-09 04:24:17 charles Exp $";
+ 
+ #include "yportenv.h"
+ 
+ #include "yaffsinterface.h"
+ #include "yaffs_guts.h"
+ #include "yaffs_tagsvalidity.h"
++#include "yaffs_getblockinfo.h"
+ 
+ #include "yaffs_tagscompat.h"
+-#ifndef  CONFIG_YAFFS_USE_OWN_SORT
++#ifndef CONFIG_YAFFS_USE_OWN_SORT
+ #include "yaffs_qsort.h"
+ #endif
+ #include "yaffs_nand.h"
+@@ -32,116 +33,116 @@ const char *yaffs_guts_c_version =
+ #include "yaffs_packedtags2.h"
+ 
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-void yfsd_LockYAFFS(BOOL fsLockOnly);
+-void yfsd_UnlockYAFFS(BOOL fsLockOnly);
+-#endif
+-
+ #define YAFFS_PASSIVE_GC_CHUNKS 2
+ 
+ #include "yaffs_ecc.h"
+ 
+ 
+ /* Robustification (if it ever comes about...) */
+-static void yaffs_RetireBlock(yaffs_Device * dev, int blockInNAND);
+-static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND, int erasedOk);
+-static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+-				     const __u8 * data,
+-				     const yaffs_ExtendedTags * tags);
+-static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+-				    const yaffs_ExtendedTags * tags);
++static void yaffs_RetireBlock(yaffs_Device *dev, int blockInNAND);
++static void yaffs_HandleWriteChunkError(yaffs_Device *dev, int chunkInNAND,
++		int erasedOk);
++static void yaffs_HandleWriteChunkOk(yaffs_Device *dev, int chunkInNAND,
++				const __u8 *data,
++				const yaffs_ExtendedTags *tags);
++static void yaffs_HandleUpdateChunk(yaffs_Device *dev, int chunkInNAND,
++				const yaffs_ExtendedTags *tags);
+ 
+ /* Other local prototypes */
+-static int yaffs_UnlinkObject( yaffs_Object *obj);
++static int yaffs_UnlinkObject(yaffs_Object *obj);
+ static int yaffs_ObjectHasCachedWriteData(yaffs_Object *obj);
+ 
+ static void yaffs_HardlinkFixup(yaffs_Device *dev, yaffs_Object *hardList);
+ 
+-static int yaffs_WriteNewChunkWithTagsToNAND(yaffs_Device * dev,
+-					     const __u8 * buffer,
+-					     yaffs_ExtendedTags * tags,
+-					     int useReserve);
+-static int yaffs_PutChunkIntoFile(yaffs_Object * in, int chunkInInode,
+-				  int chunkInNAND, int inScan);
+-
+-static yaffs_Object *yaffs_CreateNewObject(yaffs_Device * dev, int number,
+-					   yaffs_ObjectType type);
+-static void yaffs_AddObjectToDirectory(yaffs_Object * directory,
+-				       yaffs_Object * obj);
+-static int yaffs_UpdateObjectHeader(yaffs_Object * in, const YCHAR * name,
+-				    int force, int isShrink, int shadows);
+-static void yaffs_RemoveObjectFromDirectory(yaffs_Object * obj);
++static int yaffs_WriteNewChunkWithTagsToNAND(yaffs_Device *dev,
++					const __u8 *buffer,
++					yaffs_ExtendedTags *tags,
++					int useReserve);
++static int yaffs_PutChunkIntoFile(yaffs_Object *in, int chunkInInode,
++				int chunkInNAND, int inScan);
++
++static yaffs_Object *yaffs_CreateNewObject(yaffs_Device *dev, int number,
++					yaffs_ObjectType type);
++static void yaffs_AddObjectToDirectory(yaffs_Object *directory,
++				yaffs_Object *obj);
++static int yaffs_UpdateObjectHeader(yaffs_Object *in, const YCHAR *name,
++				int force, int isShrink, int shadows);
++static void yaffs_RemoveObjectFromDirectory(yaffs_Object *obj);
+ static int yaffs_CheckStructures(void);
+-static int yaffs_DeleteWorker(yaffs_Object * in, yaffs_Tnode * tn, __u32 level,
+-			      int chunkOffset, int *limit);
+-static int yaffs_DoGenericObjectDeletion(yaffs_Object * in);
+-
+-static yaffs_BlockInfo *yaffs_GetBlockInfo(yaffs_Device * dev, int blockNo);
+-
+-static __u8 *yaffs_GetTempBuffer(yaffs_Device * dev, int lineNo);
+-static void yaffs_ReleaseTempBuffer(yaffs_Device * dev, __u8 * buffer,
+-				    int lineNo);
++static int yaffs_DeleteWorker(yaffs_Object *in, yaffs_Tnode *tn, __u32 level,
++			int chunkOffset, int *limit);
++static int yaffs_DoGenericObjectDeletion(yaffs_Object *in);
++
++static yaffs_BlockInfo *yaffs_GetBlockInfo(yaffs_Device *dev, int blockNo);
+ 
+-static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev,
+-				  int chunkInNAND);
+ 
+-static int yaffs_UnlinkWorker(yaffs_Object * obj);
+-static void yaffs_DestroyObject(yaffs_Object * obj);
++static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev,
++				int chunkInNAND);
+ 
+-static int yaffs_TagsMatch(const yaffs_ExtendedTags * tags, int objectId,
+-			   int chunkInObject);
++static int yaffs_UnlinkWorker(yaffs_Object *obj);
+ 
+-loff_t yaffs_GetFileSize(yaffs_Object * obj);
++static int yaffs_TagsMatch(const yaffs_ExtendedTags *tags, int objectId,
++			int chunkInObject);
+ 
+-static int yaffs_AllocateChunk(yaffs_Device * dev, int useReserve, yaffs_BlockInfo **blockUsedPtr);
++static int yaffs_AllocateChunk(yaffs_Device *dev, int useReserve,
++				yaffs_BlockInfo **blockUsedPtr);
+ 
+-static void yaffs_VerifyFreeChunks(yaffs_Device * dev);
++static void yaffs_VerifyFreeChunks(yaffs_Device *dev);
+ 
+ static void yaffs_CheckObjectDetailsLoaded(yaffs_Object *in);
+ 
++static void yaffs_VerifyDirectory(yaffs_Object *directory);
+ #ifdef YAFFS_PARANOID
+-static int yaffs_CheckFileSanity(yaffs_Object * in);
++static int yaffs_CheckFileSanity(yaffs_Object *in);
+ #else
+ #define yaffs_CheckFileSanity(in)
+ #endif
+ 
+-static void yaffs_InvalidateWholeChunkCache(yaffs_Object * in);
+-static void yaffs_InvalidateChunkCache(yaffs_Object * object, int chunkId);
++static void yaffs_InvalidateWholeChunkCache(yaffs_Object *in);
++static void yaffs_InvalidateChunkCache(yaffs_Object *object, int chunkId);
+ 
+ static void yaffs_InvalidateCheckpoint(yaffs_Device *dev);
+ 
+-static int yaffs_FindChunkInFile(yaffs_Object * in, int chunkInInode,
+-				 yaffs_ExtendedTags * tags);
++static int yaffs_FindChunkInFile(yaffs_Object *in, int chunkInInode,
++				yaffs_ExtendedTags *tags);
+ 
+-static __u32 yaffs_GetChunkGroupBase(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos);
+-static yaffs_Tnode *yaffs_FindLevel0Tnode(yaffs_Device * dev,
+-					  yaffs_FileStructure * fStruct,
+-					  __u32 chunkId);
++static __u32 yaffs_GetChunkGroupBase(yaffs_Device *dev, yaffs_Tnode *tn,
++		unsigned pos);
++static yaffs_Tnode *yaffs_FindLevel0Tnode(yaffs_Device *dev,
++					yaffs_FileStructure *fStruct,
++					__u32 chunkId);
+ 
+ 
+ /* Function to calculate chunk and offset */
+ 
+-static void yaffs_AddrToChunk(yaffs_Device *dev, loff_t addr, __u32 *chunk, __u32 *offset)
++static void yaffs_AddrToChunk(yaffs_Device *dev, loff_t addr, int *chunkOut,
++		__u32 *offsetOut)
+ {
+-	if(dev->chunkShift){
+-		/* Easy-peasy power of 2 case */
+-		*chunk  = (__u32)(addr >> dev->chunkShift);
+-		*offset = (__u32)(addr & dev->chunkMask);
+-	}
+-	else if(dev->crumbsPerChunk)
+-	{
+-		/* Case where we're using "crumbs" */
+-		*offset = (__u32)(addr & dev->crumbMask);
+-		addr >>= dev->crumbShift;
+-		*chunk = ((__u32)addr)/dev->crumbsPerChunk;
+-		*offset += ((addr - (*chunk * dev->crumbsPerChunk)) << dev->crumbShift);
++	int chunk;
++	__u32 offset;
++
++	chunk  = (__u32)(addr >> dev->chunkShift);
++
++	if (dev->chunkDiv == 1) {
++		/* easy power of 2 case */
++		offset = (__u32)(addr & dev->chunkMask);
++	} else {
++		/* Non power-of-2 case */
++
++		loff_t chunkBase;
++
++		chunk /= dev->chunkDiv;
++
++		chunkBase = ((loff_t)chunk) * dev->nDataBytesPerChunk;
++		offset = (__u32)(addr - chunkBase);
+ 	}
+-	else
+-		YBUG();
++
++	*chunkOut = chunk;
++	*offsetOut = offset;
+ }
+ 
+-/* Function to return the number of shifts for a power of 2 greater than or equal
+- * to the given number
++/* Function to return the number of shifts for a power of 2 greater than or
++ * equal to the given number
+  * Note we don't try to cater for all possible numbers and this does not have to
+  * be hellishly efficient.
+  */
+@@ -153,13 +154,14 @@ static __u32 ShiftsGE(__u32 x)
+ 
+ 	nShifts = extraBits = 0;
+ 
+-	while(x>1){
+-		if(x & 1) extraBits++;
+-		x>>=1;
++	while (x > 1) {
++		if (x & 1)
++			extraBits++;
++		x >>= 1;
+ 		nShifts++;
+ 	}
+ 
+-	if(extraBits)
++	if (extraBits)
+ 		nShifts++;
+ 
+ 	return nShifts;
+@@ -168,16 +170,17 @@ static __u32 ShiftsGE(__u32 x)
+ /* Function to return the number of shifts to get a 1 in bit 0
+  */
+ 
+-static __u32 ShiftDiv(__u32 x)
++static __u32 Shifts(__u32 x)
+ {
+ 	int nShifts;
+ 
+ 	nShifts =  0;
+ 
+-	if(!x) return 0;
++	if (!x)
++		return 0;
+ 
+-	while( !(x&1)){
+-		x>>=1;
++	while (!(x&1)) {
++		x >>= 1;
+ 		nShifts++;
+ 	}
+ 
+@@ -195,21 +198,25 @@ static int yaffs_InitialiseTempBuffers(y
+ 	int i;
+ 	__u8 *buf = (__u8 *)1;
+ 
+-	memset(dev->tempBuffer,0,sizeof(dev->tempBuffer));
++	memset(dev->tempBuffer, 0, sizeof(dev->tempBuffer));
+ 
+ 	for (i = 0; buf && i < YAFFS_N_TEMP_BUFFERS; i++) {
+ 		dev->tempBuffer[i].line = 0;	/* not in use */
+ 		dev->tempBuffer[i].buffer = buf =
+-		    YMALLOC_DMA(dev->nDataBytesPerChunk);
++		    YMALLOC_DMA(dev->totalBytesPerChunk);
+ 	}
+ 
+ 	return buf ? YAFFS_OK : YAFFS_FAIL;
+-
+ }
+ 
+-static __u8 *yaffs_GetTempBuffer(yaffs_Device * dev, int lineNo)
++__u8 *yaffs_GetTempBuffer(yaffs_Device *dev, int lineNo)
+ {
+ 	int i, j;
++
++	dev->tempInUse++;
++	if (dev->tempInUse > dev->maxTemp)
++		dev->maxTemp = dev->tempInUse;
++
+ 	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
+ 		if (dev->tempBuffer[i].line == 0) {
+ 			dev->tempBuffer[i].line = lineNo;
+@@ -227,9 +234,9 @@ static __u8 *yaffs_GetTempBuffer(yaffs_D
+ 	T(YAFFS_TRACE_BUFFERS,
+ 	  (TSTR("Out of temp buffers at line %d, other held by lines:"),
+ 	   lineNo));
+-	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
++	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++)
+ 		T(YAFFS_TRACE_BUFFERS, (TSTR(" %d "), dev->tempBuffer[i].line));
+-	}
++
+ 	T(YAFFS_TRACE_BUFFERS, (TSTR(" " TENDSTR)));
+ 
+ 	/*
+@@ -242,10 +249,13 @@ static __u8 *yaffs_GetTempBuffer(yaffs_D
+ 
+ }
+ 
+-static void yaffs_ReleaseTempBuffer(yaffs_Device * dev, __u8 * buffer,
++void yaffs_ReleaseTempBuffer(yaffs_Device *dev, __u8 *buffer,
+ 				    int lineNo)
+ {
+ 	int i;
++
++	dev->tempInUse--;
++
+ 	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
+ 		if (dev->tempBuffer[i].buffer == buffer) {
+ 			dev->tempBuffer[i].line = 0;
+@@ -267,27 +277,26 @@ static void yaffs_ReleaseTempBuffer(yaff
+ /*
+  * Determine if we have a managed buffer.
+  */
+-int yaffs_IsManagedTempBuffer(yaffs_Device * dev, const __u8 * buffer)
++int yaffs_IsManagedTempBuffer(yaffs_Device *dev, const __u8 *buffer)
+ {
+ 	int i;
++
+ 	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
+ 		if (dev->tempBuffer[i].buffer == buffer)
+ 			return 1;
++	}
+ 
++	for (i = 0; i < dev->nShortOpCaches; i++) {
++		if (dev->srCache[i].data == buffer)
++			return 1;
+ 	}
+ 
+-    for (i = 0; i < dev->nShortOpCaches; i++) {
+-        if( dev->srCache[i].data == buffer )
+-            return 1;
+-
+-    }
+-
+-    if (buffer == dev->checkpointBuffer)
+-      return 1;
+-
+-    T(YAFFS_TRACE_ALWAYS,
+-	  (TSTR("yaffs: unmaged buffer detected.\n" TENDSTR)));
+-    return 0;
++	if (buffer == dev->checkpointBuffer)
++		return 1;
++
++	T(YAFFS_TRACE_ALWAYS,
++		(TSTR("yaffs: unmaged buffer detected.\n" TENDSTR)));
++	return 0;
+ }
+ 
+ 
+@@ -296,62 +305,63 @@ int yaffs_IsManagedTempBuffer(yaffs_Devi
+  * Chunk bitmap manipulations
+  */
+ 
+-static Y_INLINE __u8 *yaffs_BlockBits(yaffs_Device * dev, int blk)
++static Y_INLINE __u8 *yaffs_BlockBits(yaffs_Device *dev, int blk)
+ {
+ 	if (blk < dev->internalStartBlock || blk > dev->internalEndBlock) {
+ 		T(YAFFS_TRACE_ERROR,
+-		  (TSTR("**>> yaffs: BlockBits block %d is not valid" TENDSTR),
+-		   blk));
++			(TSTR("**>> yaffs: BlockBits block %d is not valid" TENDSTR),
++			blk));
+ 		YBUG();
+ 	}
+ 	return dev->chunkBits +
+-	    (dev->chunkBitmapStride * (blk - dev->internalStartBlock));
++		(dev->chunkBitmapStride * (blk - dev->internalStartBlock));
+ }
+ 
+ static Y_INLINE void yaffs_VerifyChunkBitId(yaffs_Device *dev, int blk, int chunk)
+ {
+-	if(blk < dev->internalStartBlock || blk > dev->internalEndBlock ||
+-	   chunk < 0 || chunk >= dev->nChunksPerBlock) {
+-	   T(YAFFS_TRACE_ERROR,
+-	    (TSTR("**>> yaffs: Chunk Id (%d:%d) invalid"TENDSTR),blk,chunk));
+-	    YBUG();
++	if (blk < dev->internalStartBlock || blk > dev->internalEndBlock ||
++			chunk < 0 || chunk >= dev->nChunksPerBlock) {
++		T(YAFFS_TRACE_ERROR,
++		(TSTR("**>> yaffs: Chunk Id (%d:%d) invalid"TENDSTR),
++			blk, chunk));
++		YBUG();
+ 	}
+ }
+ 
+-static Y_INLINE void yaffs_ClearChunkBits(yaffs_Device * dev, int blk)
++static Y_INLINE void yaffs_ClearChunkBits(yaffs_Device *dev, int blk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+ 
+ 	memset(blkBits, 0, dev->chunkBitmapStride);
+ }
+ 
+-static Y_INLINE void yaffs_ClearChunkBit(yaffs_Device * dev, int blk, int chunk)
++static Y_INLINE void yaffs_ClearChunkBit(yaffs_Device *dev, int blk, int chunk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+ 
+-	yaffs_VerifyChunkBitId(dev,blk,chunk);
++	yaffs_VerifyChunkBitId(dev, blk, chunk);
+ 
+ 	blkBits[chunk / 8] &= ~(1 << (chunk & 7));
+ }
+ 
+-static Y_INLINE void yaffs_SetChunkBit(yaffs_Device * dev, int blk, int chunk)
++static Y_INLINE void yaffs_SetChunkBit(yaffs_Device *dev, int blk, int chunk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+ 
+-	yaffs_VerifyChunkBitId(dev,blk,chunk);
++	yaffs_VerifyChunkBitId(dev, blk, chunk);
+ 
+ 	blkBits[chunk / 8] |= (1 << (chunk & 7));
+ }
+ 
+-static Y_INLINE int yaffs_CheckChunkBit(yaffs_Device * dev, int blk, int chunk)
++static Y_INLINE int yaffs_CheckChunkBit(yaffs_Device *dev, int blk, int chunk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+-	yaffs_VerifyChunkBitId(dev,blk,chunk);
++	yaffs_VerifyChunkBitId(dev, blk, chunk);
+ 
+ 	return (blkBits[chunk / 8] & (1 << (chunk & 7))) ? 1 : 0;
+ }
+ 
+-static Y_INLINE int yaffs_StillSomeChunkBits(yaffs_Device * dev, int blk)
++static Y_INLINE int yaffs_StillSomeChunkBits(yaffs_Device *dev, int blk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+ 	int i;
+@@ -363,17 +373,17 @@ static Y_INLINE int yaffs_StillSomeChunk
+ 	return 0;
+ }
+ 
+-static int yaffs_CountChunkBits(yaffs_Device * dev, int blk)
++static int yaffs_CountChunkBits(yaffs_Device *dev, int blk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+ 	int i;
+ 	int n = 0;
+ 	for (i = 0; i < dev->chunkBitmapStride; i++) {
+ 		__u8 x = *blkBits;
+-		while(x){
+-			if(x & 1)
++		while (x) {
++			if (x & 1)
+ 				n++;
+-			x >>=1;
++			x >>= 1;
+ 		}
+ 
+ 		blkBits++;
+@@ -400,7 +410,7 @@ static int yaffs_SkipNANDVerification(ya
+ 	return !(yaffs_traceMask & (YAFFS_TRACE_VERIFY_NAND));
+ }
+ 
+-static const char * blockStateName[] = {
++static const char *blockStateName[] = {
+ "Unknown",
+ "Needs scanning",
+ "Scanning",
+@@ -413,64 +423,65 @@ static const char * blockStateName[] = {
+ "Dead"
+ };
+ 
+-static void yaffs_VerifyBlock(yaffs_Device *dev,yaffs_BlockInfo *bi,int n)
++static void yaffs_VerifyBlock(yaffs_Device *dev, yaffs_BlockInfo *bi, int n)
+ {
+ 	int actuallyUsed;
+ 	int inUse;
+ 
+-	if(yaffs_SkipVerification(dev))
++	if (yaffs_SkipVerification(dev))
+ 		return;
+ 
+ 	/* Report illegal runtime states */
+-	if(bi->blockState <0 || bi->blockState >= YAFFS_NUMBER_OF_BLOCK_STATES)
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has undefined state %d"TENDSTR),n,bi->blockState));
++	if (bi->blockState >= YAFFS_NUMBER_OF_BLOCK_STATES)
++		T(YAFFS_TRACE_VERIFY, (TSTR("Block %d has undefined state %d"TENDSTR), n, bi->blockState));
+ 
+-	switch(bi->blockState){
+-	 case YAFFS_BLOCK_STATE_UNKNOWN:
+-	 case YAFFS_BLOCK_STATE_SCANNING:
+-	 case YAFFS_BLOCK_STATE_NEEDS_SCANNING:
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has bad run-state %s"TENDSTR),
+-		n,blockStateName[bi->blockState]));
++	switch (bi->blockState) {
++	case YAFFS_BLOCK_STATE_UNKNOWN:
++	case YAFFS_BLOCK_STATE_SCANNING:
++	case YAFFS_BLOCK_STATE_NEEDS_SCANNING:
++		T(YAFFS_TRACE_VERIFY, (TSTR("Block %d has bad run-state %s"TENDSTR),
++		n, blockStateName[bi->blockState]));
+ 	}
+ 
+ 	/* Check pages in use and soft deletions are legal */
+ 
+ 	actuallyUsed = bi->pagesInUse - bi->softDeletions;
+ 
+-	if(bi->pagesInUse < 0 || bi->pagesInUse > dev->nChunksPerBlock ||
++	if (bi->pagesInUse < 0 || bi->pagesInUse > dev->nChunksPerBlock ||
+ 	   bi->softDeletions < 0 || bi->softDeletions > dev->nChunksPerBlock ||
+ 	   actuallyUsed < 0 || actuallyUsed > dev->nChunksPerBlock)
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has illegal values pagesInUsed %d softDeletions %d"TENDSTR),
+-		n,bi->pagesInUse,bi->softDeletions));
++		T(YAFFS_TRACE_VERIFY, (TSTR("Block %d has illegal values pagesInUsed %d softDeletions %d"TENDSTR),
++		n, bi->pagesInUse, bi->softDeletions));
+ 
+ 
+ 	/* Check chunk bitmap legal */
+-	inUse = yaffs_CountChunkBits(dev,n);
+-	if(inUse != bi->pagesInUse)
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has inconsistent values pagesInUse %d counted chunk bits %d"TENDSTR),
+-			n,bi->pagesInUse,inUse));
++	inUse = yaffs_CountChunkBits(dev, n);
++	if (inUse != bi->pagesInUse)
++		T(YAFFS_TRACE_VERIFY, (TSTR("Block %d has inconsistent values pagesInUse %d counted chunk bits %d"TENDSTR),
++			n, bi->pagesInUse, inUse));
+ 
+ 	/* Check that the sequence number is valid.
+ 	 * Ten million is legal, but is very unlikely
+ 	 */
+-	if(dev->isYaffs2 &&
++	if (dev->isYaffs2 &&
+ 	   (bi->blockState == YAFFS_BLOCK_STATE_ALLOCATING || bi->blockState == YAFFS_BLOCK_STATE_FULL) &&
+-	   (bi->sequenceNumber < YAFFS_LOWEST_SEQUENCE_NUMBER || bi->sequenceNumber > 10000000 ))
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has suspect sequence number of %d"TENDSTR),
+-		n,bi->sequenceNumber));
+-
++	   (bi->sequenceNumber < YAFFS_LOWEST_SEQUENCE_NUMBER || bi->sequenceNumber > 10000000))
++		T(YAFFS_TRACE_VERIFY, (TSTR("Block %d has suspect sequence number of %d"TENDSTR),
++		n, bi->sequenceNumber));
+ }
+ 
+-static void yaffs_VerifyCollectedBlock(yaffs_Device *dev,yaffs_BlockInfo *bi,int n)
++static void yaffs_VerifyCollectedBlock(yaffs_Device *dev, yaffs_BlockInfo *bi,
++		int n)
+ {
+-	yaffs_VerifyBlock(dev,bi,n);
++	yaffs_VerifyBlock(dev, bi, n);
+ 
+ 	/* After collection the block should be in the erased state */
+-	/* TODO: This will need to change if we do partial gc */
++	/* This will need to change if we do partial gc */
+ 
+-	if(bi->blockState != YAFFS_BLOCK_STATE_EMPTY){
+-		T(YAFFS_TRACE_ERROR,(TSTR("Block %d is in state %d after gc, should be erased"TENDSTR),
+-			n,bi->blockState));
++	if (bi->blockState != YAFFS_BLOCK_STATE_COLLECTING &&
++			bi->blockState != YAFFS_BLOCK_STATE_EMPTY) {
++		T(YAFFS_TRACE_ERROR, (TSTR("Block %d is in state %d after gc, should be erased"TENDSTR),
++			n, bi->blockState));
+ 	}
+ }
+ 
+@@ -480,52 +491,49 @@ static void yaffs_VerifyBlocks(yaffs_Dev
+ 	int nBlocksPerState[YAFFS_NUMBER_OF_BLOCK_STATES];
+ 	int nIllegalBlockStates = 0;
+ 
+-
+-	if(yaffs_SkipVerification(dev))
++	if (yaffs_SkipVerification(dev))
+ 		return;
+ 
+-	memset(nBlocksPerState,0,sizeof(nBlocksPerState));
+-
++	memset(nBlocksPerState, 0, sizeof(nBlocksPerState));
+ 
+-	for(i = dev->internalStartBlock; i <= dev->internalEndBlock; i++){
+-		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,i);
+-		yaffs_VerifyBlock(dev,bi,i);
++	for (i = dev->internalStartBlock; i <= dev->internalEndBlock; i++) {
++		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, i);
++		yaffs_VerifyBlock(dev, bi, i);
+ 
+-		if(bi->blockState >=0 && bi->blockState < YAFFS_NUMBER_OF_BLOCK_STATES)
++		if (bi->blockState < YAFFS_NUMBER_OF_BLOCK_STATES)
+ 			nBlocksPerState[bi->blockState]++;
+ 		else
+ 			nIllegalBlockStates++;
+-
+ 	}
+ 
+-	T(YAFFS_TRACE_VERIFY,(TSTR(""TENDSTR)));
+-	T(YAFFS_TRACE_VERIFY,(TSTR("Block summary"TENDSTR)));
++	T(YAFFS_TRACE_VERIFY, (TSTR(""TENDSTR)));
++	T(YAFFS_TRACE_VERIFY, (TSTR("Block summary"TENDSTR)));
+ 
+-	T(YAFFS_TRACE_VERIFY,(TSTR("%d blocks have illegal states"TENDSTR),nIllegalBlockStates));
+-	if(nBlocksPerState[YAFFS_BLOCK_STATE_ALLOCATING] > 1)
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Too many allocating blocks"TENDSTR)));
++	T(YAFFS_TRACE_VERIFY, (TSTR("%d blocks have illegal states"TENDSTR), nIllegalBlockStates));
++	if (nBlocksPerState[YAFFS_BLOCK_STATE_ALLOCATING] > 1)
++		T(YAFFS_TRACE_VERIFY, (TSTR("Too many allocating blocks"TENDSTR)));
+ 
+-	for(i = 0; i < YAFFS_NUMBER_OF_BLOCK_STATES; i++)
++	for (i = 0; i < YAFFS_NUMBER_OF_BLOCK_STATES; i++)
+ 		T(YAFFS_TRACE_VERIFY,
+ 		  (TSTR("%s %d blocks"TENDSTR),
+-		  blockStateName[i],nBlocksPerState[i]));
++		  blockStateName[i], nBlocksPerState[i]));
+ 
+-	if(dev->blocksInCheckpoint != nBlocksPerState[YAFFS_BLOCK_STATE_CHECKPOINT])
++	if (dev->blocksInCheckpoint != nBlocksPerState[YAFFS_BLOCK_STATE_CHECKPOINT])
+ 		T(YAFFS_TRACE_VERIFY,
+ 		 (TSTR("Checkpoint block count wrong dev %d count %d"TENDSTR),
+ 		 dev->blocksInCheckpoint, nBlocksPerState[YAFFS_BLOCK_STATE_CHECKPOINT]));
+ 
+-	if(dev->nErasedBlocks != nBlocksPerState[YAFFS_BLOCK_STATE_EMPTY])
++	if (dev->nErasedBlocks != nBlocksPerState[YAFFS_BLOCK_STATE_EMPTY])
+ 		T(YAFFS_TRACE_VERIFY,
+ 		 (TSTR("Erased block count wrong dev %d count %d"TENDSTR),
+ 		 dev->nErasedBlocks, nBlocksPerState[YAFFS_BLOCK_STATE_EMPTY]));
+ 
+-	if(nBlocksPerState[YAFFS_BLOCK_STATE_COLLECTING] > 1)
++	if (nBlocksPerState[YAFFS_BLOCK_STATE_COLLECTING] > 1)
+ 		T(YAFFS_TRACE_VERIFY,
+ 		 (TSTR("Too many collecting blocks %d (max is 1)"TENDSTR),
+ 		 nBlocksPerState[YAFFS_BLOCK_STATE_COLLECTING]));
+ 
+-	T(YAFFS_TRACE_VERIFY,(TSTR(""TENDSTR)));
++	T(YAFFS_TRACE_VERIFY, (TSTR(""TENDSTR)));
+ 
+ }
+ 
+@@ -535,26 +543,26 @@ static void yaffs_VerifyBlocks(yaffs_Dev
+  */
+ static void yaffs_VerifyObjectHeader(yaffs_Object *obj, yaffs_ObjectHeader *oh, yaffs_ExtendedTags *tags, int parentCheck)
+ {
+-	if(yaffs_SkipVerification(obj->myDev))
++	if (obj && yaffs_SkipVerification(obj->myDev))
+ 		return;
+ 
+-	if(!(tags && obj && oh)){
+-	 	T(YAFFS_TRACE_VERIFY,
+-		 		(TSTR("Verifying object header tags %x obj %x oh %x"TENDSTR),
+-		 		(__u32)tags,(__u32)obj,(__u32)oh));
++	if (!(tags && obj && oh)) {
++		T(YAFFS_TRACE_VERIFY,
++				(TSTR("Verifying object header tags %x obj %x oh %x"TENDSTR),
++				(__u32)tags, (__u32)obj, (__u32)oh));
+ 		return;
+ 	}
+ 
+-	if(oh->type <= YAFFS_OBJECT_TYPE_UNKNOWN ||
+-	   oh->type > YAFFS_OBJECT_TYPE_MAX)
+-	 	T(YAFFS_TRACE_VERIFY,
+-		 (TSTR("Obj %d header type is illegal value 0x%x"TENDSTR),
+-		 tags->objectId, oh->type));
+-
+-	if(tags->objectId != obj->objectId)
+-	 	T(YAFFS_TRACE_VERIFY,
+-		 (TSTR("Obj %d header mismatch objectId %d"TENDSTR),
+-		 tags->objectId, obj->objectId));
++	if (oh->type <= YAFFS_OBJECT_TYPE_UNKNOWN ||
++			oh->type > YAFFS_OBJECT_TYPE_MAX)
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d header type is illegal value 0x%x"TENDSTR),
++			tags->objectId, oh->type));
++
++	if (tags->objectId != obj->objectId)
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d header mismatch objectId %d"TENDSTR),
++			tags->objectId, obj->objectId));
+ 
+ 
+ 	/*
+@@ -563,46 +571,43 @@ static void yaffs_VerifyObjectHeader(yaf
+ 	 * Tests do not apply to the root object.
+ 	 */
+ 
+-	if(parentCheck && tags->objectId > 1 && !obj->parent)
+-	 	T(YAFFS_TRACE_VERIFY,
+-		 (TSTR("Obj %d header mismatch parentId %d obj->parent is NULL"TENDSTR),
+-	 	 tags->objectId, oh->parentObjectId));
+-
+-
+-	if(parentCheck && obj->parent &&
+-	   oh->parentObjectId != obj->parent->objectId &&
+-	   (oh->parentObjectId != YAFFS_OBJECTID_UNLINKED ||
+-	    obj->parent->objectId != YAFFS_OBJECTID_DELETED))
+-	 	T(YAFFS_TRACE_VERIFY,
+-		 (TSTR("Obj %d header mismatch parentId %d parentObjectId %d"TENDSTR),
+-	 	 tags->objectId, oh->parentObjectId, obj->parent->objectId));
++	if (parentCheck && tags->objectId > 1 && !obj->parent)
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d header mismatch parentId %d obj->parent is NULL"TENDSTR),
++			tags->objectId, oh->parentObjectId));
+ 
++	if (parentCheck && obj->parent &&
++			oh->parentObjectId != obj->parent->objectId &&
++			(oh->parentObjectId != YAFFS_OBJECTID_UNLINKED ||
++			obj->parent->objectId != YAFFS_OBJECTID_DELETED))
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d header mismatch parentId %d parentObjectId %d"TENDSTR),
++			tags->objectId, oh->parentObjectId, obj->parent->objectId));
+ 
+-	if(tags->objectId > 1 && oh->name[0] == 0) /* Null name */
++	if (tags->objectId > 1 && oh->name[0] == 0) /* Null name */
+ 		T(YAFFS_TRACE_VERIFY,
+-		(TSTR("Obj %d header name is NULL"TENDSTR),
+-		 obj->objectId));
++			(TSTR("Obj %d header name is NULL"TENDSTR),
++			obj->objectId));
+ 
+-	if(tags->objectId > 1 && ((__u8)(oh->name[0])) == 0xff) /* Trashed name */
++	if (tags->objectId > 1 && ((__u8)(oh->name[0])) == 0xff) /* Trashed name */
+ 		T(YAFFS_TRACE_VERIFY,
+-		(TSTR("Obj %d header name is 0xFF"TENDSTR),
+-		 obj->objectId));
++			(TSTR("Obj %d header name is 0xFF"TENDSTR),
++			obj->objectId));
+ }
+ 
+ 
+ 
+-static int yaffs_VerifyTnodeWorker(yaffs_Object * obj, yaffs_Tnode * tn,
+-				  	__u32 level, int chunkOffset)
++static int yaffs_VerifyTnodeWorker(yaffs_Object *obj, yaffs_Tnode *tn,
++					__u32 level, int chunkOffset)
+ {
+ 	int i;
+ 	yaffs_Device *dev = obj->myDev;
+ 	int ok = 1;
+-	int nTnodeBytes = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
+ 
+ 	if (tn) {
+ 		if (level > 0) {
+ 
+-			for (i = 0; i < YAFFS_NTNODES_INTERNAL && ok; i++){
++			for (i = 0; i < YAFFS_NTNODES_INTERNAL && ok; i++) {
+ 				if (tn->internal[i]) {
+ 					ok = yaffs_VerifyTnodeWorker(obj,
+ 							tn->internal[i],
+@@ -611,20 +616,19 @@ static int yaffs_VerifyTnodeWorker(yaffs
+ 				}
+ 			}
+ 		} else if (level == 0) {
+-			int i;
+ 			yaffs_ExtendedTags tags;
+ 			__u32 objectId = obj->objectId;
+ 
+ 			chunkOffset <<=  YAFFS_TNODES_LEVEL0_BITS;
+ 
+-			for(i = 0; i < YAFFS_NTNODES_LEVEL0; i++){
+-				__u32 theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
++			for (i = 0; i < YAFFS_NTNODES_LEVEL0; i++) {
++				__u32 theChunk = yaffs_GetChunkGroupBase(dev, tn, i);
+ 
+-				if(theChunk > 0){
++				if (theChunk > 0) {
+ 					/* T(~0,(TSTR("verifying (%d:%d) %d"TENDSTR),tags.objectId,tags.chunkId,theChunk)); */
+-					yaffs_ReadChunkWithTagsFromNAND(dev,theChunk,NULL, &tags);
+-					if(tags.objectId != objectId || tags.chunkId != chunkOffset){
+-						T(~0,(TSTR("Object %d chunkId %d NAND mismatch chunk %d tags (%d:%d)"TENDSTR),
++					yaffs_ReadChunkWithTagsFromNAND(dev, theChunk, NULL, &tags);
++					if (tags.objectId != objectId || tags.chunkId != chunkOffset) {
++						T(~0, (TSTR("Object %d chunkId %d NAND mismatch chunk %d tags (%d:%d)"TENDSTR),
+ 							objectId, chunkOffset, theChunk,
+ 							tags.objectId, tags.chunkId));
+ 					}
+@@ -646,13 +650,15 @@ static void yaffs_VerifyFile(yaffs_Objec
+ 	__u32 lastChunk;
+ 	__u32 x;
+ 	__u32 i;
+-	int ok;
+ 	yaffs_Device *dev;
+ 	yaffs_ExtendedTags tags;
+ 	yaffs_Tnode *tn;
+ 	__u32 objectId;
+ 
+-	if(obj && yaffs_SkipVerification(obj->myDev))
++	if (!obj)
++		return;
++
++	if (yaffs_SkipVerification(obj->myDev))
+ 		return;
+ 
+ 	dev = obj->myDev;
+@@ -662,17 +668,17 @@ static void yaffs_VerifyFile(yaffs_Objec
+ 	lastChunk =  obj->variant.fileVariant.fileSize / dev->nDataBytesPerChunk + 1;
+ 	x = lastChunk >> YAFFS_TNODES_LEVEL0_BITS;
+ 	requiredTallness = 0;
+-	while (x> 0) {
++	while (x > 0) {
+ 		x >>= YAFFS_TNODES_INTERNAL_BITS;
+ 		requiredTallness++;
+ 	}
+ 
+ 	actualTallness = obj->variant.fileVariant.topLevel;
+ 
+-	if(requiredTallness > actualTallness )
++	if (requiredTallness > actualTallness)
+ 		T(YAFFS_TRACE_VERIFY,
+ 		(TSTR("Obj %d had tnode tallness %d, needs to be %d"TENDSTR),
+-		 obj->objectId,actualTallness, requiredTallness));
++		 obj->objectId, actualTallness, requiredTallness));
+ 
+ 
+ 	/* Check that the chunks in the tnode tree are all correct.
+@@ -680,39 +686,31 @@ static void yaffs_VerifyFile(yaffs_Objec
+ 	 * checking the tags for every chunk match.
+ 	 */
+ 
+-	if(yaffs_SkipNANDVerification(dev))
++	if (yaffs_SkipNANDVerification(dev))
+ 		return;
+ 
+-	for(i = 1; i <= lastChunk; i++){
+-		tn = yaffs_FindLevel0Tnode(dev, &obj->variant.fileVariant,i);
++	for (i = 1; i <= lastChunk; i++) {
++		tn = yaffs_FindLevel0Tnode(dev, &obj->variant.fileVariant, i);
+ 
+ 		if (tn) {
+-			__u32 theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
+-			if(theChunk > 0){
++			__u32 theChunk = yaffs_GetChunkGroupBase(dev, tn, i);
++			if (theChunk > 0) {
+ 				/* T(~0,(TSTR("verifying (%d:%d) %d"TENDSTR),objectId,i,theChunk)); */
+-				yaffs_ReadChunkWithTagsFromNAND(dev,theChunk,NULL, &tags);
+-				if(tags.objectId != objectId || tags.chunkId != i){
+-					T(~0,(TSTR("Object %d chunkId %d NAND mismatch chunk %d tags (%d:%d)"TENDSTR),
++				yaffs_ReadChunkWithTagsFromNAND(dev, theChunk, NULL, &tags);
++				if (tags.objectId != objectId || tags.chunkId != i) {
++					T(~0, (TSTR("Object %d chunkId %d NAND mismatch chunk %d tags (%d:%d)"TENDSTR),
+ 						objectId, i, theChunk,
+ 						tags.objectId, tags.chunkId));
+ 				}
+ 			}
+ 		}
+-
+ 	}
+-
+ }
+ 
+-static void yaffs_VerifyDirectory(yaffs_Object *obj)
+-{
+-	if(obj && yaffs_SkipVerification(obj->myDev))
+-		return;
+-
+-}
+ 
+ static void yaffs_VerifyHardLink(yaffs_Object *obj)
+ {
+-	if(obj && yaffs_SkipVerification(obj->myDev))
++	if (obj && yaffs_SkipVerification(obj->myDev))
+ 		return;
+ 
+ 	/* Verify sane equivalent object */
+@@ -720,7 +718,7 @@ static void yaffs_VerifyHardLink(yaffs_O
+ 
+ static void yaffs_VerifySymlink(yaffs_Object *obj)
+ {
+-	if(obj && yaffs_SkipVerification(obj->myDev))
++	if (obj && yaffs_SkipVerification(obj->myDev))
+ 		return;
+ 
+ 	/* Verify symlink string */
+@@ -728,7 +726,7 @@ static void yaffs_VerifySymlink(yaffs_Ob
+ 
+ static void yaffs_VerifySpecial(yaffs_Object *obj)
+ {
+-	if(obj && yaffs_SkipVerification(obj->myDev))
++	if (obj && yaffs_SkipVerification(obj->myDev))
+ 		return;
+ }
+ 
+@@ -740,14 +738,19 @@ static void yaffs_VerifyObject(yaffs_Obj
+ 	__u32 chunkMax;
+ 
+ 	__u32 chunkIdOk;
+-	__u32 chunkIsLive;
++	__u32 chunkInRange;
++	__u32 chunkShouldNotBeDeleted;
++	__u32 chunkValid;
++
++	if (!obj)
++		return;
+ 
+-	if(!obj)
++	if (obj->beingCreated)
+ 		return;
+ 
+ 	dev = obj->myDev;
+ 
+-	if(yaffs_SkipVerification(dev))
++	if (yaffs_SkipVerification(dev))
+ 		return;
+ 
+ 	/* Check sane object header chunk */
+@@ -755,50 +758,54 @@ static void yaffs_VerifyObject(yaffs_Obj
+ 	chunkMin = dev->internalStartBlock * dev->nChunksPerBlock;
+ 	chunkMax = (dev->internalEndBlock+1) * dev->nChunksPerBlock - 1;
+ 
+-	chunkIdOk = (obj->chunkId >= chunkMin && obj->chunkId <= chunkMax);
+-	chunkIsLive = chunkIdOk &&
++	chunkInRange = (((unsigned)(obj->hdrChunk)) >= chunkMin && ((unsigned)(obj->hdrChunk)) <= chunkMax);
++	chunkIdOk = chunkInRange || obj->hdrChunk == 0;
++	chunkValid = chunkInRange &&
+ 			yaffs_CheckChunkBit(dev,
+-					    obj->chunkId / dev->nChunksPerBlock,
+-					    obj->chunkId % dev->nChunksPerBlock);
+-	if(!obj->fake &&
+-	    (!chunkIdOk || !chunkIsLive)) {
+-	   T(YAFFS_TRACE_VERIFY,
+-	   (TSTR("Obj %d has chunkId %d %s %s"TENDSTR),
+-	   obj->objectId,obj->chunkId,
+-	   chunkIdOk ? "" : ",out of range",
+-	   chunkIsLive || !chunkIdOk ? "" : ",marked as deleted"));
++					obj->hdrChunk / dev->nChunksPerBlock,
++					obj->hdrChunk % dev->nChunksPerBlock);
++	chunkShouldNotBeDeleted = chunkInRange && !chunkValid;
++
++	if (!obj->fake &&
++			(!chunkIdOk || chunkShouldNotBeDeleted)) {
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d has chunkId %d %s %s"TENDSTR),
++			obj->objectId, obj->hdrChunk,
++			chunkIdOk ? "" : ",out of range",
++			chunkShouldNotBeDeleted ? ",marked as deleted" : ""));
+ 	}
+ 
+-	if(chunkIdOk && chunkIsLive &&!yaffs_SkipNANDVerification(dev)) {
++	if (chunkValid && !yaffs_SkipNANDVerification(dev)) {
+ 		yaffs_ExtendedTags tags;
+ 		yaffs_ObjectHeader *oh;
+-		__u8 *buffer = yaffs_GetTempBuffer(dev,__LINE__);
++		__u8 *buffer = yaffs_GetTempBuffer(dev, __LINE__);
+ 
+ 		oh = (yaffs_ObjectHeader *)buffer;
+ 
+-		yaffs_ReadChunkWithTagsFromNAND(dev, obj->chunkId,buffer, &tags);
++		yaffs_ReadChunkWithTagsFromNAND(dev, obj->hdrChunk, buffer,
++				&tags);
+ 
+-		yaffs_VerifyObjectHeader(obj,oh,&tags,1);
++		yaffs_VerifyObjectHeader(obj, oh, &tags, 1);
+ 
+-		yaffs_ReleaseTempBuffer(dev,buffer,__LINE__);
++		yaffs_ReleaseTempBuffer(dev, buffer, __LINE__);
+ 	}
+ 
+ 	/* Verify it has a parent */
+-	if(obj && !obj->fake &&
+-	   (!obj->parent || obj->parent->myDev != dev)){
+-	   T(YAFFS_TRACE_VERIFY,
+-	   (TSTR("Obj %d has parent pointer %p which does not look like an object"TENDSTR),
+-	   obj->objectId,obj->parent));
++	if (obj && !obj->fake &&
++			(!obj->parent || obj->parent->myDev != dev)) {
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d has parent pointer %p which does not look like an object"TENDSTR),
++			obj->objectId, obj->parent));
+ 	}
+ 
+ 	/* Verify parent is a directory */
+-	if(obj->parent && obj->parent->variantType != YAFFS_OBJECT_TYPE_DIRECTORY){
+-	   T(YAFFS_TRACE_VERIFY,
+-	   (TSTR("Obj %d's parent is not a directory (type %d)"TENDSTR),
+-	   obj->objectId,obj->parent->variantType));
++	if (obj->parent && obj->parent->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d's parent is not a directory (type %d)"TENDSTR),
++			obj->objectId, obj->parent->variantType));
+ 	}
+ 
+-	switch(obj->variantType){
++	switch (obj->variantType) {
+ 	case YAFFS_OBJECT_TYPE_FILE:
+ 		yaffs_VerifyFile(obj);
+ 		break;
+@@ -818,33 +825,30 @@ static void yaffs_VerifyObject(yaffs_Obj
+ 	default:
+ 		T(YAFFS_TRACE_VERIFY,
+ 		(TSTR("Obj %d has illegaltype %d"TENDSTR),
+-		obj->objectId,obj->variantType));
++		obj->objectId, obj->variantType));
+ 		break;
+ 	}
+-
+-
+ }
+ 
+ static void yaffs_VerifyObjects(yaffs_Device *dev)
+ {
+ 	yaffs_Object *obj;
+ 	int i;
+-	struct list_head *lh;
++	struct ylist_head *lh;
+ 
+-	if(yaffs_SkipVerification(dev))
++	if (yaffs_SkipVerification(dev))
+ 		return;
+ 
+ 	/* Iterate through the objects in each hash entry */
+ 
+-	 for(i = 0; i <  YAFFS_NOBJECT_BUCKETS; i++){
+-	 	list_for_each(lh, &dev->objectBucket[i].list) {
++	for (i = 0; i <  YAFFS_NOBJECT_BUCKETS; i++) {
++		ylist_for_each(lh, &dev->objectBucket[i].list) {
+ 			if (lh) {
+-				obj = list_entry(lh, yaffs_Object, hashLink);
++				obj = ylist_entry(lh, yaffs_Object, hashLink);
+ 				yaffs_VerifyObject(obj);
+ 			}
+ 		}
+-	 }
+-
++	}
+ }
+ 
+ 
+@@ -855,19 +859,20 @@ static void yaffs_VerifyObjects(yaffs_De
+ static Y_INLINE int yaffs_HashFunction(int n)
+ {
+ 	n = abs(n);
+-	return (n % YAFFS_NOBJECT_BUCKETS);
++	return n % YAFFS_NOBJECT_BUCKETS;
+ }
+ 
+ /*
+- * Access functions to useful fake objects
++ * Access functions to useful fake objects.
++ * Note that root might have a presence in NAND if permissions are set.
+  */
+ 
+-yaffs_Object *yaffs_Root(yaffs_Device * dev)
++yaffs_Object *yaffs_Root(yaffs_Device *dev)
+ {
+ 	return dev->rootDir;
+ }
+ 
+-yaffs_Object *yaffs_LostNFound(yaffs_Device * dev)
++yaffs_Object *yaffs_LostNFound(yaffs_Device *dev)
+ {
+ 	return dev->lostNFoundDir;
+ }
+@@ -877,7 +882,7 @@ yaffs_Object *yaffs_LostNFound(yaffs_Dev
+  *  Erased NAND checking functions
+  */
+ 
+-int yaffs_CheckFF(__u8 * buffer, int nBytes)
++int yaffs_CheckFF(__u8 *buffer, int nBytes)
+ {
+ 	/* Horrible, slow implementation */
+ 	while (nBytes--) {
+@@ -889,9 +894,8 @@ int yaffs_CheckFF(__u8 * buffer, int nBy
+ }
+ 
+ static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev,
+-				  int chunkInNAND)
++				int chunkInNAND)
+ {
+-
+ 	int retval = YAFFS_OK;
+ 	__u8 *data = yaffs_GetTempBuffer(dev, __LINE__);
+ 	yaffs_ExtendedTags tags;
+@@ -899,10 +903,9 @@ static int yaffs_CheckChunkErased(struct
+ 
+ 	result = yaffs_ReadChunkWithTagsFromNAND(dev, chunkInNAND, data, &tags);
+ 
+-	if(tags.eccResult > YAFFS_ECC_RESULT_NO_ERROR)
++	if (tags.eccResult > YAFFS_ECC_RESULT_NO_ERROR)
+ 		retval = YAFFS_FAIL;
+ 
+-
+ 	if (!yaffs_CheckFF(data, dev->nDataBytesPerChunk) || tags.chunkUsed) {
+ 		T(YAFFS_TRACE_NANDACCESS,
+ 		  (TSTR("Chunk %d not erased" TENDSTR), chunkInNAND));
+@@ -915,11 +918,10 @@ static int yaffs_CheckChunkErased(struct
+ 
+ }
+ 
+-
+ static int yaffs_WriteNewChunkWithTagsToNAND(struct yaffs_DeviceStruct *dev,
+-					     const __u8 * data,
+-					     yaffs_ExtendedTags * tags,
+-					     int useReserve)
++					const __u8 *data,
++					yaffs_ExtendedTags *tags,
++					int useReserve)
+ {
+ 	int attempts = 0;
+ 	int writeOk = 0;
+@@ -972,7 +974,7 @@ static int yaffs_WriteNewChunkWithTagsTo
+ 			erasedOk = yaffs_CheckChunkErased(dev, chunk);
+ 			if (erasedOk != YAFFS_OK) {
+ 				T(YAFFS_TRACE_ERROR,
+-				(TSTR ("**>> yaffs chunk %d was not erased"
++				(TSTR("**>> yaffs chunk %d was not erased"
+ 				TENDSTR), chunk));
+ 
+ 				/* try another chunk */
+@@ -992,7 +994,11 @@ static int yaffs_WriteNewChunkWithTagsTo
+ 		/* Copy the data into the robustification buffer */
+ 		yaffs_HandleWriteChunkOk(dev, chunk, data, tags);
+ 
+-	} while (writeOk != YAFFS_OK && attempts < yaffs_wr_attempts);
++	} while (writeOk != YAFFS_OK &&
++		(yaffs_wr_attempts <= 0 || attempts <= yaffs_wr_attempts));
++
++	if (!writeOk)
++		chunk = -1;
+ 
+ 	if (attempts > 1) {
+ 		T(YAFFS_TRACE_ERROR,
+@@ -1009,13 +1015,35 @@ static int yaffs_WriteNewChunkWithTagsTo
+  * Block retiring for handling a broken block.
+  */
+ 
+-static void yaffs_RetireBlock(yaffs_Device * dev, int blockInNAND)
++static void yaffs_RetireBlock(yaffs_Device *dev, int blockInNAND)
+ {
+ 	yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, blockInNAND);
+ 
+ 	yaffs_InvalidateCheckpoint(dev);
+ 
+-	yaffs_MarkBlockBad(dev, blockInNAND);
++	if (yaffs_MarkBlockBad(dev, blockInNAND) != YAFFS_OK) {
++		if (yaffs_EraseBlockInNAND(dev, blockInNAND) != YAFFS_OK) {
++			T(YAFFS_TRACE_ALWAYS, (TSTR(
++				"yaffs: Failed to mark bad and erase block %d"
++				TENDSTR), blockInNAND));
++		} else {
++			yaffs_ExtendedTags tags;
++			int chunkId = blockInNAND * dev->nChunksPerBlock;
++
++			__u8 *buffer = yaffs_GetTempBuffer(dev, __LINE__);
++
++			memset(buffer, 0xff, dev->nDataBytesPerChunk);
++			yaffs_InitialiseTags(&tags);
++			tags.sequenceNumber = YAFFS_SEQUENCE_BAD_BLOCK;
++			if (dev->writeChunkWithTagsToNAND(dev, chunkId -
++				dev->chunkOffset, buffer, &tags) != YAFFS_OK)
++				T(YAFFS_TRACE_ALWAYS, (TSTR("yaffs: Failed to "
++					TCONT("write bad block marker to block %d")
++					TENDSTR), blockInNAND));
++
++			yaffs_ReleaseTempBuffer(dev, buffer, __LINE__);
++		}
++	}
+ 
+ 	bi->blockState = YAFFS_BLOCK_STATE_DEAD;
+ 	bi->gcPrioritise = 0;
+@@ -1029,49 +1057,45 @@ static void yaffs_RetireBlock(yaffs_Devi
+  *
+  */
+ 
+-static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+-				     const __u8 * data,
+-				     const yaffs_ExtendedTags * tags)
++static void yaffs_HandleWriteChunkOk(yaffs_Device *dev, int chunkInNAND,
++				const __u8 *data,
++				const yaffs_ExtendedTags *tags)
+ {
+ }
+ 
+-static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+-				    const yaffs_ExtendedTags * tags)
++static void yaffs_HandleUpdateChunk(yaffs_Device *dev, int chunkInNAND,
++				const yaffs_ExtendedTags *tags)
+ {
+ }
+ 
+ void yaffs_HandleChunkError(yaffs_Device *dev, yaffs_BlockInfo *bi)
+ {
+-	if(!bi->gcPrioritise){
++	if (!bi->gcPrioritise) {
+ 		bi->gcPrioritise = 1;
+ 		dev->hasPendingPrioritisedGCs = 1;
+-		bi->chunkErrorStrikes ++;
++		bi->chunkErrorStrikes++;
+ 
+-		if(bi->chunkErrorStrikes > 3){
++		if (bi->chunkErrorStrikes > 3) {
+ 			bi->needsRetiring = 1; /* Too many stikes, so retire this */
+ 			T(YAFFS_TRACE_ALWAYS, (TSTR("yaffs: Block struck out" TENDSTR)));
+ 
+ 		}
+-
+ 	}
+ }
+ 
+-static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND, int erasedOk)
++static void yaffs_HandleWriteChunkError(yaffs_Device *dev, int chunkInNAND,
++		int erasedOk)
+ {
+-
+ 	int blockInNAND = chunkInNAND / dev->nChunksPerBlock;
+ 	yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, blockInNAND);
+ 
+-	yaffs_HandleChunkError(dev,bi);
++	yaffs_HandleChunkError(dev, bi);
+ 
+-
+-	if(erasedOk ) {
++	if (erasedOk) {
+ 		/* Was an actual write failure, so mark the block for retirement  */
+ 		bi->needsRetiring = 1;
+ 		T(YAFFS_TRACE_ERROR | YAFFS_TRACE_BAD_BLOCKS,
+ 		  (TSTR("**>> Block %d needs retiring" TENDSTR), blockInNAND));
+-
+-
+ 	}
+ 
+ 	/* Delete the chunk */
+@@ -1081,12 +1105,12 @@ static void yaffs_HandleWriteChunkError(
+ 
+ /*---------------- Name handling functions ------------*/
+ 
+-static __u16 yaffs_CalcNameSum(const YCHAR * name)
++static __u16 yaffs_CalcNameSum(const YCHAR *name)
+ {
+ 	__u16 sum = 0;
+ 	__u16 i = 1;
+ 
+-	YUCHAR *bname = (YUCHAR *) name;
++	const YUCHAR *bname = (const YUCHAR *) name;
+ 	if (bname) {
+ 		while ((*bname) && (i < (YAFFS_MAX_NAME_LENGTH/2))) {
+ 
+@@ -1102,14 +1126,14 @@ static __u16 yaffs_CalcNameSum(const YCH
+ 	return sum;
+ }
+ 
+-static void yaffs_SetObjectName(yaffs_Object * obj, const YCHAR * name)
++static void yaffs_SetObjectName(yaffs_Object *obj, const YCHAR *name)
+ {
+ #ifdef CONFIG_YAFFS_SHORT_NAMES_IN_RAM
+-	if (name && yaffs_strlen(name) <= YAFFS_SHORT_NAME_LENGTH) {
++	memset(obj->shortName, 0, sizeof(YCHAR) * (YAFFS_SHORT_NAME_LENGTH+1));
++	if (name && yaffs_strlen(name) <= YAFFS_SHORT_NAME_LENGTH)
+ 		yaffs_strcpy(obj->shortName, name);
+-	} else {
++	else
+ 		obj->shortName[0] = _Y('\0');
+-	}
+ #endif
+ 	obj->sum = yaffs_CalcNameSum(name);
+ }
+@@ -1126,7 +1150,7 @@ static void yaffs_SetObjectName(yaffs_Ob
+  * Don't use this function directly
+  */
+ 
+-static int yaffs_CreateTnodes(yaffs_Device * dev, int nTnodes)
++static int yaffs_CreateTnodes(yaffs_Device *dev, int nTnodes)
+ {
+ 	int i;
+ 	int tnodeSize;
+@@ -1143,6 +1167,9 @@ static int yaffs_CreateTnodes(yaffs_Devi
+ 	 * Must be a multiple of 32-bits  */
+ 	tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
+ 
++	if (tnodeSize < sizeof(yaffs_Tnode))
++		tnodeSize = sizeof(yaffs_Tnode);
++
+ 	/* make these things */
+ 
+ 	newTnodes = YMALLOC(nTnodes * tnodeSize);
+@@ -1150,7 +1177,7 @@ static int yaffs_CreateTnodes(yaffs_Devi
+ 
+ 	if (!newTnodes) {
+ 		T(YAFFS_TRACE_ERROR,
+-		  (TSTR("yaffs: Could not allocate Tnodes" TENDSTR)));
++			(TSTR("yaffs: Could not allocate Tnodes" TENDSTR)));
+ 		return YAFFS_FAIL;
+ 	}
+ 
+@@ -1170,7 +1197,7 @@ static int yaffs_CreateTnodes(yaffs_Devi
+ 	dev->freeTnodes = newTnodes;
+ #else
+ 	/* New hookup for wide tnodes */
+-	for(i = 0; i < nTnodes -1; i++) {
++	for (i = 0; i < nTnodes - 1; i++) {
+ 		curr = (yaffs_Tnode *) &mem[i * tnodeSize];
+ 		next = (yaffs_Tnode *) &mem[(i+1) * tnodeSize];
+ 		curr->internal[0] = next;
+@@ -1197,7 +1224,6 @@ static int yaffs_CreateTnodes(yaffs_Devi
+ 		  (TSTR
+ 		   ("yaffs: Could not add tnodes to management list" TENDSTR)));
+ 		   return YAFFS_FAIL;
+-
+ 	} else {
+ 		tnl->tnodes = newTnodes;
+ 		tnl->next = dev->allocatedTnodeList;
+@@ -1211,14 +1237,13 @@ static int yaffs_CreateTnodes(yaffs_Devi
+ 
+ /* GetTnode gets us a clean tnode. Tries to make allocate more if we run out */
+ 
+-static yaffs_Tnode *yaffs_GetTnodeRaw(yaffs_Device * dev)
++static yaffs_Tnode *yaffs_GetTnodeRaw(yaffs_Device *dev)
+ {
+ 	yaffs_Tnode *tn = NULL;
+ 
+ 	/* If there are none left make more */
+-	if (!dev->freeTnodes) {
++	if (!dev->freeTnodes)
+ 		yaffs_CreateTnodes(dev, YAFFS_ALLOCATION_NTNODES);
+-	}
+ 
+ 	if (dev->freeTnodes) {
+ 		tn = dev->freeTnodes;
+@@ -1233,21 +1258,27 @@ static yaffs_Tnode *yaffs_GetTnodeRaw(ya
+ 		dev->nFreeTnodes--;
+ 	}
+ 
++	dev->nCheckpointBlocksRequired = 0; /* force recalculation*/
++
+ 	return tn;
+ }
+ 
+-static yaffs_Tnode *yaffs_GetTnode(yaffs_Device * dev)
++static yaffs_Tnode *yaffs_GetTnode(yaffs_Device *dev)
+ {
+ 	yaffs_Tnode *tn = yaffs_GetTnodeRaw(dev);
++	int tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
+ 
+-	if(tn)
+-		memset(tn, 0, (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8);
++	if (tnodeSize < sizeof(yaffs_Tnode))
++		tnodeSize = sizeof(yaffs_Tnode);
++
++	if (tn)
++		memset(tn, 0, tnodeSize);
+ 
+ 	return tn;
+ }
+ 
+ /* FreeTnode frees up a tnode and puts it back on the free list */
+-static void yaffs_FreeTnode(yaffs_Device * dev, yaffs_Tnode * tn)
++static void yaffs_FreeTnode(yaffs_Device *dev, yaffs_Tnode *tn)
+ {
+ 	if (tn) {
+ #ifdef CONFIG_YAFFS_TNODE_LIST_DEBUG
+@@ -1262,9 +1293,10 @@ static void yaffs_FreeTnode(yaffs_Device
+ 		dev->freeTnodes = tn;
+ 		dev->nFreeTnodes++;
+ 	}
++	dev->nCheckpointBlocksRequired = 0; /* force recalculation*/
+ }
+ 
+-static void yaffs_DeinitialiseTnodes(yaffs_Device * dev)
++static void yaffs_DeinitialiseTnodes(yaffs_Device *dev)
+ {
+ 	/* Free the list of allocated tnodes */
+ 	yaffs_TnodeList *tmp;
+@@ -1282,71 +1314,72 @@ static void yaffs_DeinitialiseTnodes(yaf
+ 	dev->nFreeTnodes = 0;
+ }
+ 
+-static void yaffs_InitialiseTnodes(yaffs_Device * dev)
++static void yaffs_InitialiseTnodes(yaffs_Device *dev)
+ {
+ 	dev->allocatedTnodeList = NULL;
+ 	dev->freeTnodes = NULL;
+ 	dev->nFreeTnodes = 0;
+ 	dev->nTnodesCreated = 0;
+-
+ }
+ 
+ 
+-void yaffs_PutLevel0Tnode(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos, unsigned val)
++void yaffs_PutLevel0Tnode(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos,
++		unsigned val)
+ {
+-  __u32 *map = (__u32 *)tn;
+-  __u32 bitInMap;
+-  __u32 bitInWord;
+-  __u32 wordInMap;
+-  __u32 mask;
++	__u32 *map = (__u32 *)tn;
++	__u32 bitInMap;
++	__u32 bitInWord;
++	__u32 wordInMap;
++	__u32 mask;
+ 
+-  pos &= YAFFS_TNODES_LEVEL0_MASK;
+-  val >>= dev->chunkGroupBits;
++	pos &= YAFFS_TNODES_LEVEL0_MASK;
++	val >>= dev->chunkGroupBits;
+ 
+-  bitInMap = pos * dev->tnodeWidth;
+-  wordInMap = bitInMap /32;
+-  bitInWord = bitInMap & (32 -1);
++	bitInMap = pos * dev->tnodeWidth;
++	wordInMap = bitInMap / 32;
++	bitInWord = bitInMap & (32 - 1);
+ 
+-  mask = dev->tnodeMask << bitInWord;
++	mask = dev->tnodeMask << bitInWord;
+ 
+-  map[wordInMap] &= ~mask;
+-  map[wordInMap] |= (mask & (val << bitInWord));
++	map[wordInMap] &= ~mask;
++	map[wordInMap] |= (mask & (val << bitInWord));
+ 
+-  if(dev->tnodeWidth > (32-bitInWord)) {
+-    bitInWord = (32 - bitInWord);
+-    wordInMap++;;
+-    mask = dev->tnodeMask >> (/*dev->tnodeWidth -*/ bitInWord);
+-    map[wordInMap] &= ~mask;
+-    map[wordInMap] |= (mask & (val >> bitInWord));
+-  }
++	if (dev->tnodeWidth > (32 - bitInWord)) {
++		bitInWord = (32 - bitInWord);
++		wordInMap++;;
++		mask = dev->tnodeMask >> (/*dev->tnodeWidth -*/ bitInWord);
++		map[wordInMap] &= ~mask;
++		map[wordInMap] |= (mask & (val >> bitInWord));
++	}
+ }
+ 
+-static __u32 yaffs_GetChunkGroupBase(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos)
++static __u32 yaffs_GetChunkGroupBase(yaffs_Device *dev, yaffs_Tnode *tn,
++		unsigned pos)
+ {
+-  __u32 *map = (__u32 *)tn;
+-  __u32 bitInMap;
+-  __u32 bitInWord;
+-  __u32 wordInMap;
+-  __u32 val;
++	__u32 *map = (__u32 *)tn;
++	__u32 bitInMap;
++	__u32 bitInWord;
++	__u32 wordInMap;
++	__u32 val;
+ 
+-  pos &= YAFFS_TNODES_LEVEL0_MASK;
++	pos &= YAFFS_TNODES_LEVEL0_MASK;
+ 
+-  bitInMap = pos * dev->tnodeWidth;
+-  wordInMap = bitInMap /32;
+-  bitInWord = bitInMap & (32 -1);
++	bitInMap = pos * dev->tnodeWidth;
++	wordInMap = bitInMap / 32;
++	bitInWord = bitInMap & (32 - 1);
+ 
+-  val = map[wordInMap] >> bitInWord;
++	val = map[wordInMap] >> bitInWord;
+ 
+-  if(dev->tnodeWidth > (32-bitInWord)) {
+-    bitInWord = (32 - bitInWord);
+-    wordInMap++;;
+-    val |= (map[wordInMap] << bitInWord);
+-  }
++	if	(dev->tnodeWidth > (32 - bitInWord)) {
++		bitInWord = (32 - bitInWord);
++		wordInMap++;;
++		val |= (map[wordInMap] << bitInWord);
++	}
+ 
+-  val &= dev->tnodeMask;
+-  val <<= dev->chunkGroupBits;
++	val &= dev->tnodeMask;
++	val <<= dev->chunkGroupBits;
+ 
+-  return val;
++	return val;
+ }
+ 
+ /* ------------------- End of individual tnode manipulation -----------------*/
+@@ -1357,24 +1390,21 @@ static __u32 yaffs_GetChunkGroupBase(yaf
+  */
+ 
+ /* FindLevel0Tnode finds the level 0 tnode, if one exists. */
+-static yaffs_Tnode *yaffs_FindLevel0Tnode(yaffs_Device * dev,
+-					  yaffs_FileStructure * fStruct,
+-					  __u32 chunkId)
++static yaffs_Tnode *yaffs_FindLevel0Tnode(yaffs_Device *dev,
++					yaffs_FileStructure *fStruct,
++					__u32 chunkId)
+ {
+-
+ 	yaffs_Tnode *tn = fStruct->top;
+ 	__u32 i;
+ 	int requiredTallness;
+ 	int level = fStruct->topLevel;
+ 
+ 	/* Check sane level and chunk Id */
+-	if (level < 0 || level > YAFFS_TNODES_MAX_LEVEL) {
++	if (level < 0 || level > YAFFS_TNODES_MAX_LEVEL)
+ 		return NULL;
+-	}
+ 
+-	if (chunkId > YAFFS_MAX_CHUNK_ID) {
++	if (chunkId > YAFFS_MAX_CHUNK_ID)
+ 		return NULL;
+-	}
+ 
+ 	/* First check we're tall enough (ie enough topLevel) */
+ 
+@@ -1385,22 +1415,17 @@ static yaffs_Tnode *yaffs_FindLevel0Tnod
+ 		requiredTallness++;
+ 	}
+ 
+-	if (requiredTallness > fStruct->topLevel) {
+-		/* Not tall enough, so we can't find it, return NULL. */
+-		return NULL;
+-	}
++	if (requiredTallness > fStruct->topLevel)
++		return NULL; /* Not tall enough, so we can't find it */
+ 
+ 	/* Traverse down to level 0 */
+ 	while (level > 0 && tn) {
+-		tn = tn->
+-		    internal[(chunkId >>
+-			       ( YAFFS_TNODES_LEVEL0_BITS +
+-			         (level - 1) *
+-			         YAFFS_TNODES_INTERNAL_BITS)
+-			      ) &
+-			     YAFFS_TNODES_INTERNAL_MASK];
++		tn = tn->internal[(chunkId >>
++			(YAFFS_TNODES_LEVEL0_BITS +
++				(level - 1) *
++				YAFFS_TNODES_INTERNAL_BITS)) &
++			YAFFS_TNODES_INTERNAL_MASK];
+ 		level--;
+-
+ 	}
+ 
+ 	return tn;
+@@ -1417,12 +1442,11 @@ static yaffs_Tnode *yaffs_FindLevel0Tnod
+  *  be plugged into the ttree.
+  */
+ 
+-static yaffs_Tnode *yaffs_AddOrFindLevel0Tnode(yaffs_Device * dev,
+-					       yaffs_FileStructure * fStruct,
+-					       __u32 chunkId,
+-					       yaffs_Tnode *passedTn)
++static yaffs_Tnode *yaffs_AddOrFindLevel0Tnode(yaffs_Device *dev,
++					yaffs_FileStructure *fStruct,
++					__u32 chunkId,
++					yaffs_Tnode *passedTn)
+ {
+-
+ 	int requiredTallness;
+ 	int i;
+ 	int l;
+@@ -1432,13 +1456,11 @@ static yaffs_Tnode *yaffs_AddOrFindLevel
+ 
+ 
+ 	/* Check sane level and page Id */
+-	if (fStruct->topLevel < 0 || fStruct->topLevel > YAFFS_TNODES_MAX_LEVEL) {
++	if (fStruct->topLevel < 0 || fStruct->topLevel > YAFFS_TNODES_MAX_LEVEL)
+ 		return NULL;
+-	}
+ 
+-	if (chunkId > YAFFS_MAX_CHUNK_ID) {
++	if (chunkId > YAFFS_MAX_CHUNK_ID)
+ 		return NULL;
+-	}
+ 
+ 	/* First check we're tall enough (ie enough topLevel) */
+ 
+@@ -1451,7 +1473,7 @@ static yaffs_Tnode *yaffs_AddOrFindLevel
+ 
+ 
+ 	if (requiredTallness > fStruct->topLevel) {
+-		/* Not tall enough,gotta make the tree taller */
++		/* Not tall enough, gotta make the tree taller */
+ 		for (i = fStruct->topLevel; i < requiredTallness; i++) {
+ 
+ 			tn = yaffs_GetTnode(dev);
+@@ -1473,27 +1495,27 @@ static yaffs_Tnode *yaffs_AddOrFindLevel
+ 	l = fStruct->topLevel;
+ 	tn = fStruct->top;
+ 
+-	if(l > 0) {
++	if (l > 0) {
+ 		while (l > 0 && tn) {
+ 			x = (chunkId >>
+-			     ( YAFFS_TNODES_LEVEL0_BITS +
++			     (YAFFS_TNODES_LEVEL0_BITS +
+ 			      (l - 1) * YAFFS_TNODES_INTERNAL_BITS)) &
+ 			    YAFFS_TNODES_INTERNAL_MASK;
+ 
+ 
+-			if((l>1) && !tn->internal[x]){
++			if ((l > 1) && !tn->internal[x]) {
+ 				/* Add missing non-level-zero tnode */
+ 				tn->internal[x] = yaffs_GetTnode(dev);
+ 
+-			} else if(l == 1) {
++			} else if (l == 1) {
+ 				/* Looking from level 1 at level 0 */
+-			 	if (passedTn) {
++				if (passedTn) {
+ 					/* If we already have one, then release it.*/
+-					if(tn->internal[x])
+-						yaffs_FreeTnode(dev,tn->internal[x]);
++					if (tn->internal[x])
++						yaffs_FreeTnode(dev, tn->internal[x]);
+ 					tn->internal[x] = passedTn;
+ 
+-				} else if(!tn->internal[x]) {
++				} else if (!tn->internal[x]) {
+ 					/* Don't have one, none passed in */
+ 					tn->internal[x] = yaffs_GetTnode(dev);
+ 				}
+@@ -1504,31 +1526,29 @@ static yaffs_Tnode *yaffs_AddOrFindLevel
+ 		}
+ 	} else {
+ 		/* top is level 0 */
+-		if(passedTn) {
+-			memcpy(tn,passedTn,(dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8);
+-			yaffs_FreeTnode(dev,passedTn);
++		if (passedTn) {
++			memcpy(tn, passedTn, (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8);
++			yaffs_FreeTnode(dev, passedTn);
+ 		}
+ 	}
+ 
+ 	return tn;
+ }
+ 
+-static int yaffs_FindChunkInGroup(yaffs_Device * dev, int theChunk,
+-				  yaffs_ExtendedTags * tags, int objectId,
+-				  int chunkInInode)
++static int yaffs_FindChunkInGroup(yaffs_Device *dev, int theChunk,
++				yaffs_ExtendedTags *tags, int objectId,
++				int chunkInInode)
+ {
+ 	int j;
+ 
+ 	for (j = 0; theChunk && j < dev->chunkGroupSize; j++) {
+-		if (yaffs_CheckChunkBit
+-		    (dev, theChunk / dev->nChunksPerBlock,
+-		     theChunk % dev->nChunksPerBlock)) {
++		if (yaffs_CheckChunkBit(dev, theChunk / dev->nChunksPerBlock,
++				theChunk % dev->nChunksPerBlock)) {
+ 			yaffs_ReadChunkWithTagsFromNAND(dev, theChunk, NULL,
+ 							tags);
+ 			if (yaffs_TagsMatch(tags, objectId, chunkInInode)) {
+ 				/* found it; */
+ 				return theChunk;
+-
+ 			}
+ 		}
+ 		theChunk++;
+@@ -1543,7 +1563,7 @@ static int yaffs_FindChunkInGroup(yaffs_
+  * Returns 0 if it stopped early due to hitting the limit and the delete is incomplete.
+  */
+ 
+-static int yaffs_DeleteWorker(yaffs_Object * in, yaffs_Tnode * tn, __u32 level,
++static int yaffs_DeleteWorker(yaffs_Object *in, yaffs_Tnode *tn, __u32 level,
+ 			      int chunkOffset, int *limit)
+ {
+ 	int i;
+@@ -1557,7 +1577,6 @@ static int yaffs_DeleteWorker(yaffs_Obje
+ 
+ 	if (tn) {
+ 		if (level > 0) {
+-
+ 			for (i = YAFFS_NTNODES_INTERNAL - 1; allDone && i >= 0;
+ 			     i--) {
+ 				if (tn->internal[i]) {
+@@ -1565,17 +1584,17 @@ static int yaffs_DeleteWorker(yaffs_Obje
+ 						allDone = 0;
+ 					} else {
+ 						allDone =
+-						    yaffs_DeleteWorker(in,
+-								       tn->
+-								       internal
+-								       [i],
+-								       level -
+-								       1,
+-								       (chunkOffset
++							yaffs_DeleteWorker(in,
++								tn->
++								internal
++								[i],
++								level -
++								1,
++								(chunkOffset
+ 									<<
+ 									YAFFS_TNODES_INTERNAL_BITS)
+-								       + i,
+-								       limit);
++								+ i,
++								limit);
+ 					}
+ 					if (allDone) {
+ 						yaffs_FreeTnode(dev,
+@@ -1584,27 +1603,25 @@ static int yaffs_DeleteWorker(yaffs_Obje
+ 						tn->internal[i] = NULL;
+ 					}
+ 				}
+-
+ 			}
+ 			return (allDone) ? 1 : 0;
+ 		} else if (level == 0) {
+ 			int hitLimit = 0;
+ 
+ 			for (i = YAFFS_NTNODES_LEVEL0 - 1; i >= 0 && !hitLimit;
+-			     i--) {
+-			        theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
++					i--) {
++				theChunk = yaffs_GetChunkGroupBase(dev, tn, i);
+ 				if (theChunk) {
+ 
+-					chunkInInode =
+-					    (chunkOffset <<
+-					     YAFFS_TNODES_LEVEL0_BITS) + i;
++					chunkInInode = (chunkOffset <<
++						YAFFS_TNODES_LEVEL0_BITS) + i;
+ 
+ 					foundChunk =
+-					    yaffs_FindChunkInGroup(dev,
+-								   theChunk,
+-								   &tags,
+-								   in->objectId,
+-								   chunkInInode);
++						yaffs_FindChunkInGroup(dev,
++								theChunk,
++								&tags,
++								in->objectId,
++								chunkInInode);
+ 
+ 					if (foundChunk > 0) {
+ 						yaffs_DeleteChunk(dev,
+@@ -1613,14 +1630,13 @@ static int yaffs_DeleteWorker(yaffs_Obje
+ 						in->nDataChunks--;
+ 						if (limit) {
+ 							*limit = *limit - 1;
+-							if (*limit <= 0) {
++							if (*limit <= 0)
+ 								hitLimit = 1;
+-							}
+ 						}
+ 
+ 					}
+ 
+-					yaffs_PutLevel0Tnode(dev,tn,i,0);
++					yaffs_PutLevel0Tnode(dev, tn, i, 0);
+ 				}
+ 
+ 			}
+@@ -1634,9 +1650,8 @@ static int yaffs_DeleteWorker(yaffs_Obje
+ 
+ }
+ 
+-static void yaffs_SoftDeleteChunk(yaffs_Device * dev, int chunk)
++static void yaffs_SoftDeleteChunk(yaffs_Device *dev, int chunk)
+ {
+-
+ 	yaffs_BlockInfo *theBlock;
+ 
+ 	T(YAFFS_TRACE_DELETION, (TSTR("soft delete chunk %d" TENDSTR), chunk));
+@@ -1654,7 +1669,7 @@ static void yaffs_SoftDeleteChunk(yaffs_
+  * Thus, essentially this is the same as DeleteWorker except that the chunks are soft deleted.
+  */
+ 
+-static int yaffs_SoftDeleteWorker(yaffs_Object * in, yaffs_Tnode * tn,
++static int yaffs_SoftDeleteWorker(yaffs_Object *in, yaffs_Tnode *tn,
+ 				  __u32 level, int chunkOffset)
+ {
+ 	int i;
+@@ -1691,14 +1706,14 @@ static int yaffs_SoftDeleteWorker(yaffs_
+ 		} else if (level == 0) {
+ 
+ 			for (i = YAFFS_NTNODES_LEVEL0 - 1; i >= 0; i--) {
+-				theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
++				theChunk = yaffs_GetChunkGroupBase(dev, tn, i);
+ 				if (theChunk) {
+ 					/* Note this does not find the real chunk, only the chunk group.
+ 					 * We make an assumption that a chunk group is not larger than
+ 					 * a block.
+ 					 */
+ 					yaffs_SoftDeleteChunk(dev, theChunk);
+-					yaffs_PutLevel0Tnode(dev,tn,i,0);
++					yaffs_PutLevel0Tnode(dev, tn, i, 0);
+ 				}
+ 
+ 			}
+@@ -1712,7 +1727,7 @@ static int yaffs_SoftDeleteWorker(yaffs_
+ 
+ }
+ 
+-static void yaffs_SoftDeleteFile(yaffs_Object * obj)
++static void yaffs_SoftDeleteFile(yaffs_Object *obj)
+ {
+ 	if (obj->deleted &&
+ 	    obj->variantType == YAFFS_OBJECT_TYPE_FILE && !obj->softDeleted) {
+@@ -1746,8 +1761,8 @@ static void yaffs_SoftDeleteFile(yaffs_O
+  * by a special case.
+  */
+ 
+-static yaffs_Tnode *yaffs_PruneWorker(yaffs_Device * dev, yaffs_Tnode * tn,
+-				      __u32 level, int del0)
++static yaffs_Tnode *yaffs_PruneWorker(yaffs_Device *dev, yaffs_Tnode *tn,
++				__u32 level, int del0)
+ {
+ 	int i;
+ 	int hasData;
+@@ -1763,9 +1778,8 @@ static yaffs_Tnode *yaffs_PruneWorker(ya
+ 						      (i == 0) ? del0 : 1);
+ 			}
+ 
+-			if (tn->internal[i]) {
++			if (tn->internal[i])
+ 				hasData++;
+-			}
+ 		}
+ 
+ 		if (hasData == 0 && del0) {
+@@ -1781,8 +1795,8 @@ static yaffs_Tnode *yaffs_PruneWorker(ya
+ 
+ }
+ 
+-static int yaffs_PruneFileStructure(yaffs_Device * dev,
+-				    yaffs_FileStructure * fStruct)
++static int yaffs_PruneFileStructure(yaffs_Device *dev,
++				yaffs_FileStructure *fStruct)
+ {
+ 	int i;
+ 	int hasData;
+@@ -1805,9 +1819,8 @@ static int yaffs_PruneFileStructure(yaff
+ 
+ 			hasData = 0;
+ 			for (i = 1; i < YAFFS_NTNODES_INTERNAL; i++) {
+-				if (tn->internal[i]) {
++				if (tn->internal[i])
+ 					hasData++;
+-				}
+ 			}
+ 
+ 			if (!hasData) {
+@@ -1828,7 +1841,7 @@ static int yaffs_PruneFileStructure(yaff
+ /* yaffs_CreateFreeObjects creates a bunch more objects and
+  * adds them to the object free list.
+  */
+-static int yaffs_CreateFreeObjects(yaffs_Device * dev, int nObjects)
++static int yaffs_CreateFreeObjects(yaffs_Device *dev, int nObjects)
+ {
+ 	int i;
+ 	yaffs_Object *newObjects;
+@@ -1842,9 +1855,9 @@ static int yaffs_CreateFreeObjects(yaffs
+ 	list = YMALLOC(sizeof(yaffs_ObjectList));
+ 
+ 	if (!newObjects || !list) {
+-		if(newObjects)
++		if (newObjects)
+ 			YFREE(newObjects);
+-		if(list)
++		if (list)
+ 			YFREE(list);
+ 		T(YAFFS_TRACE_ALLOCATE,
+ 		  (TSTR("yaffs: Could not allocate more objects" TENDSTR)));
+@@ -1854,7 +1867,7 @@ static int yaffs_CreateFreeObjects(yaffs
+ 	/* Hook them into the free list */
+ 	for (i = 0; i < nObjects - 1; i++) {
+ 		newObjects[i].siblings.next =
+-		    (struct list_head *)(&newObjects[i + 1]);
++				(struct ylist_head *)(&newObjects[i + 1]);
+ 	}
+ 
+ 	newObjects[nObjects - 1].siblings.next = (void *)dev->freeObjects;
+@@ -1873,85 +1886,109 @@ static int yaffs_CreateFreeObjects(yaffs
+ 
+ 
+ /* AllocateEmptyObject gets us a clean Object. Tries to make allocate more if we run out */
+-static yaffs_Object *yaffs_AllocateEmptyObject(yaffs_Device * dev)
++static yaffs_Object *yaffs_AllocateEmptyObject(yaffs_Device *dev)
+ {
+ 	yaffs_Object *tn = NULL;
+ 
++#ifdef VALGRIND_TEST
++	tn = YMALLOC(sizeof(yaffs_Object));
++#else
+ 	/* If there are none left make more */
+-	if (!dev->freeObjects) {
++	if (!dev->freeObjects)
+ 		yaffs_CreateFreeObjects(dev, YAFFS_ALLOCATION_NOBJECTS);
+-	}
+ 
+ 	if (dev->freeObjects) {
+ 		tn = dev->freeObjects;
+ 		dev->freeObjects =
+-		    (yaffs_Object *) (dev->freeObjects->siblings.next);
++			(yaffs_Object *) (dev->freeObjects->siblings.next);
+ 		dev->nFreeObjects--;
+-
++	}
++#endif
++	if (tn) {
+ 		/* Now sweeten it up... */
+ 
+ 		memset(tn, 0, sizeof(yaffs_Object));
++		tn->beingCreated = 1;
++
+ 		tn->myDev = dev;
+-		tn->chunkId = -1;
++		tn->hdrChunk = 0;
+ 		tn->variantType = YAFFS_OBJECT_TYPE_UNKNOWN;
+-		INIT_LIST_HEAD(&(tn->hardLinks));
+-		INIT_LIST_HEAD(&(tn->hashLink));
+-		INIT_LIST_HEAD(&tn->siblings);
++		YINIT_LIST_HEAD(&(tn->hardLinks));
++		YINIT_LIST_HEAD(&(tn->hashLink));
++		YINIT_LIST_HEAD(&tn->siblings);
++
++
++		/* Now make the directory sane */
++		if (dev->rootDir) {
++			tn->parent = dev->rootDir;
++			ylist_add(&(tn->siblings), &dev->rootDir->variant.directoryVariant.children);
++		}
+ 
+ 		/* Add it to the lost and found directory.
+ 		 * NB Can't put root or lostNFound in lostNFound so
+ 		 * check if lostNFound exists first
+ 		 */
+-		if (dev->lostNFoundDir) {
++		if (dev->lostNFoundDir)
+ 			yaffs_AddObjectToDirectory(dev->lostNFoundDir, tn);
+-		}
++
++		tn->beingCreated = 0;
+ 	}
+ 
++	dev->nCheckpointBlocksRequired = 0; /* force recalculation*/
++
+ 	return tn;
+ }
+ 
+-static yaffs_Object *yaffs_CreateFakeDirectory(yaffs_Device * dev, int number,
++static yaffs_Object *yaffs_CreateFakeDirectory(yaffs_Device *dev, int number,
+ 					       __u32 mode)
+ {
+ 
+ 	yaffs_Object *obj =
+ 	    yaffs_CreateNewObject(dev, number, YAFFS_OBJECT_TYPE_DIRECTORY);
+ 	if (obj) {
+-		obj->fake = 1;		/* it is fake so it has no NAND presence... */
++		obj->fake = 1;		/* it is fake so it might have no NAND presence... */
+ 		obj->renameAllowed = 0;	/* ... and we're not allowed to rename it... */
+ 		obj->unlinkAllowed = 0;	/* ... or unlink it */
+ 		obj->deleted = 0;
+ 		obj->unlinked = 0;
+ 		obj->yst_mode = mode;
+ 		obj->myDev = dev;
+-		obj->chunkId = 0;	/* Not a valid chunk. */
++		obj->hdrChunk = 0;	/* Not a valid chunk. */
+ 	}
+ 
+ 	return obj;
+ 
+ }
+ 
+-static void yaffs_UnhashObject(yaffs_Object * tn)
++static void yaffs_UnhashObject(yaffs_Object *tn)
+ {
+ 	int bucket;
+ 	yaffs_Device *dev = tn->myDev;
+ 
+ 	/* If it is still linked into the bucket list, free from the list */
+-	if (!list_empty(&tn->hashLink)) {
+-		list_del_init(&tn->hashLink);
++	if (!ylist_empty(&tn->hashLink)) {
++		ylist_del_init(&tn->hashLink);
+ 		bucket = yaffs_HashFunction(tn->objectId);
+ 		dev->objectBucket[bucket].count--;
+ 	}
+-
+ }
+ 
+ /*  FreeObject frees up a Object and puts it back on the free list */
+-static void yaffs_FreeObject(yaffs_Object * tn)
++static void yaffs_FreeObject(yaffs_Object *tn)
+ {
+-
+ 	yaffs_Device *dev = tn->myDev;
+ 
+-#ifdef  __KERNEL__
++#ifdef __KERNEL__
++	T(YAFFS_TRACE_OS, (TSTR("FreeObject %p inode %p"TENDSTR), tn, tn->myInode));
++#endif
++
++	if (tn->parent)
++		YBUG();
++	if (!ylist_empty(&tn->siblings))
++		YBUG();
++
++
++#ifdef __KERNEL__
+ 	if (tn->myInode) {
+ 		/* We're still hooked up to a cached inode.
+ 		 * Don't delete now, but mark for later deletion
+@@ -1963,24 +2000,28 @@ static void yaffs_FreeObject(yaffs_Objec
+ 
+ 	yaffs_UnhashObject(tn);
+ 
++#ifdef VALGRIND_TEST
++	YFREE(tn);
++#else
+ 	/* Link into the free list. */
+-	tn->siblings.next = (struct list_head *)(dev->freeObjects);
++	tn->siblings.next = (struct ylist_head *)(dev->freeObjects);
+ 	dev->freeObjects = tn;
+ 	dev->nFreeObjects++;
++#endif
++	dev->nCheckpointBlocksRequired = 0; /* force recalculation*/
+ }
+ 
+ #ifdef __KERNEL__
+ 
+-void yaffs_HandleDeferedFree(yaffs_Object * obj)
++void yaffs_HandleDeferedFree(yaffs_Object *obj)
+ {
+-	if (obj->deferedFree) {
++	if (obj->deferedFree)
+ 		yaffs_FreeObject(obj);
+-	}
+ }
+ 
+ #endif
+ 
+-static void yaffs_DeinitialiseObjects(yaffs_Device * dev)
++static void yaffs_DeinitialiseObjects(yaffs_Device *dev)
+ {
+ 	/* Free the list of allocated Objects */
+ 
+@@ -1998,7 +2039,7 @@ static void yaffs_DeinitialiseObjects(ya
+ 	dev->nFreeObjects = 0;
+ }
+ 
+-static void yaffs_InitialiseObjects(yaffs_Device * dev)
++static void yaffs_InitialiseObjects(yaffs_Device *dev)
+ {
+ 	int i;
+ 
+@@ -2007,15 +2048,14 @@ static void yaffs_InitialiseObjects(yaff
+ 	dev->nFreeObjects = 0;
+ 
+ 	for (i = 0; i < YAFFS_NOBJECT_BUCKETS; i++) {
+-		INIT_LIST_HEAD(&dev->objectBucket[i].list);
++		YINIT_LIST_HEAD(&dev->objectBucket[i].list);
+ 		dev->objectBucket[i].count = 0;
+ 	}
+-
+ }
+ 
+-static int yaffs_FindNiceObjectBucket(yaffs_Device * dev)
++static int yaffs_FindNiceObjectBucket(yaffs_Device *dev)
+ {
+-	static int x = 0;
++	static int x;
+ 	int i;
+ 	int l = 999;
+ 	int lowest = 999999;
+@@ -2049,7 +2089,7 @@ static int yaffs_FindNiceObjectBucket(ya
+ 	return l;
+ }
+ 
+-static int yaffs_CreateNewObjectNumber(yaffs_Device * dev)
++static int yaffs_CreateNewObjectNumber(yaffs_Device *dev)
+ {
+ 	int bucket = yaffs_FindNiceObjectBucket(dev);
+ 
+@@ -2058,7 +2098,7 @@ static int yaffs_CreateNewObjectNumber(y
+ 	 */
+ 
+ 	int found = 0;
+-	struct list_head *i;
++	struct ylist_head *i;
+ 
+ 	__u32 n = (__u32) bucket;
+ 
+@@ -2068,41 +2108,38 @@ static int yaffs_CreateNewObjectNumber(y
+ 		found = 1;
+ 		n += YAFFS_NOBJECT_BUCKETS;
+ 		if (1 || dev->objectBucket[bucket].count > 0) {
+-			list_for_each(i, &dev->objectBucket[bucket].list) {
++			ylist_for_each(i, &dev->objectBucket[bucket].list) {
+ 				/* If there is already one in the list */
+-				if (i
+-				    && list_entry(i, yaffs_Object,
+-						  hashLink)->objectId == n) {
++				if (i && ylist_entry(i, yaffs_Object,
++						hashLink)->objectId == n) {
+ 					found = 0;
+ 				}
+ 			}
+ 		}
+ 	}
+ 
+-
+ 	return n;
+ }
+ 
+-static void yaffs_HashObject(yaffs_Object * in)
++static void yaffs_HashObject(yaffs_Object *in)
+ {
+ 	int bucket = yaffs_HashFunction(in->objectId);
+ 	yaffs_Device *dev = in->myDev;
+ 
+-	list_add(&in->hashLink, &dev->objectBucket[bucket].list);
++	ylist_add(&in->hashLink, &dev->objectBucket[bucket].list);
+ 	dev->objectBucket[bucket].count++;
+-
+ }
+ 
+-yaffs_Object *yaffs_FindObjectByNumber(yaffs_Device * dev, __u32 number)
++yaffs_Object *yaffs_FindObjectByNumber(yaffs_Device *dev, __u32 number)
+ {
+ 	int bucket = yaffs_HashFunction(number);
+-	struct list_head *i;
++	struct ylist_head *i;
+ 	yaffs_Object *in;
+ 
+-	list_for_each(i, &dev->objectBucket[bucket].list) {
++	ylist_for_each(i, &dev->objectBucket[bucket].list) {
+ 		/* Look if it is in the list */
+ 		if (i) {
+-			in = list_entry(i, yaffs_Object, hashLink);
++			in = ylist_entry(i, yaffs_Object, hashLink);
+ 			if (in->objectId == number) {
+ #ifdef __KERNEL__
+ 				/* Don't tell the VFS about this one if it is defered free */
+@@ -2118,31 +2155,27 @@ yaffs_Object *yaffs_FindObjectByNumber(y
+ 	return NULL;
+ }
+ 
+-yaffs_Object *yaffs_CreateNewObject(yaffs_Device * dev, int number,
++yaffs_Object *yaffs_CreateNewObject(yaffs_Device *dev, int number,
+ 				    yaffs_ObjectType type)
+ {
+-
+ 	yaffs_Object *theObject;
+-	yaffs_Tnode *tn;
++	yaffs_Tnode *tn = NULL;
+ 
+-	if (number < 0) {
++	if (number < 0)
+ 		number = yaffs_CreateNewObjectNumber(dev);
+-	}
+ 
+ 	theObject = yaffs_AllocateEmptyObject(dev);
+-	if(!theObject)
++	if (!theObject)
+ 		return NULL;
+ 
+-	if(type == YAFFS_OBJECT_TYPE_FILE){
++	if (type == YAFFS_OBJECT_TYPE_FILE) {
+ 		tn = yaffs_GetTnode(dev);
+-		if(!tn){
++		if (!tn) {
+ 			yaffs_FreeObject(theObject);
+ 			return NULL;
+ 		}
+ 	}
+ 
+-
+-
+ 	if (theObject) {
+ 		theObject->fake = 0;
+ 		theObject->renameAllowed = 1;
+@@ -2171,8 +2204,8 @@ yaffs_Object *yaffs_CreateNewObject(yaff
+ 			theObject->variant.fileVariant.top = tn;
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_DIRECTORY:
+-			INIT_LIST_HEAD(&theObject->variant.directoryVariant.
+-				       children);
++			YINIT_LIST_HEAD(&theObject->variant.directoryVariant.
++					children);
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_SYMLINK:
+ 		case YAFFS_OBJECT_TYPE_HARDLINK:
+@@ -2188,32 +2221,30 @@ yaffs_Object *yaffs_CreateNewObject(yaff
+ 	return theObject;
+ }
+ 
+-static yaffs_Object *yaffs_FindOrCreateObjectByNumber(yaffs_Device * dev,
++static yaffs_Object *yaffs_FindOrCreateObjectByNumber(yaffs_Device *dev,
+ 						      int number,
+ 						      yaffs_ObjectType type)
+ {
+ 	yaffs_Object *theObject = NULL;
+ 
+-	if (number > 0) {
++	if (number > 0)
+ 		theObject = yaffs_FindObjectByNumber(dev, number);
+-	}
+ 
+-	if (!theObject) {
++	if (!theObject)
+ 		theObject = yaffs_CreateNewObject(dev, number, type);
+-	}
+ 
+ 	return theObject;
+ 
+ }
+ 
+ 
+-static YCHAR *yaffs_CloneString(const YCHAR * str)
++static YCHAR *yaffs_CloneString(const YCHAR *str)
+ {
+ 	YCHAR *newStr = NULL;
+ 
+ 	if (str && *str) {
+ 		newStr = YMALLOC((yaffs_strlen(str) + 1) * sizeof(YCHAR));
+-		if(newStr)
++		if (newStr)
+ 			yaffs_strcpy(newStr, str);
+ 	}
+ 
+@@ -2229,29 +2260,31 @@ static YCHAR *yaffs_CloneString(const YC
+  */
+ 
+ static yaffs_Object *yaffs_MknodObject(yaffs_ObjectType type,
+-				       yaffs_Object * parent,
+-				       const YCHAR * name,
++				       yaffs_Object *parent,
++				       const YCHAR *name,
+ 				       __u32 mode,
+ 				       __u32 uid,
+ 				       __u32 gid,
+-				       yaffs_Object * equivalentObject,
+-				       const YCHAR * aliasString, __u32 rdev)
++				       yaffs_Object *equivalentObject,
++				       const YCHAR *aliasString, __u32 rdev)
+ {
+ 	yaffs_Object *in;
+-	YCHAR *str;
++	YCHAR *str = NULL;
+ 
+ 	yaffs_Device *dev = parent->myDev;
+ 
+ 	/* Check if the entry exists. If it does then fail the call since we don't want a dup.*/
+-	if (yaffs_FindObjectByName(parent, name)) {
++	if (yaffs_FindObjectByName(parent, name))
+ 		return NULL;
+-	}
+ 
+ 	in = yaffs_CreateNewObject(dev, -1, type);
+ 
+-	if(type == YAFFS_OBJECT_TYPE_SYMLINK){
++	if (!in)
++		return YAFFS_FAIL;
++
++	if (type == YAFFS_OBJECT_TYPE_SYMLINK) {
+ 		str = yaffs_CloneString(aliasString);
+-		if(!str){
++		if (!str) {
+ 			yaffs_FreeObject(in);
+ 			return NULL;
+ 		}
+@@ -2260,7 +2293,7 @@ static yaffs_Object *yaffs_MknodObject(y
+ 
+ 
+ 	if (in) {
+-		in->chunkId = -1;
++		in->hdrChunk = 0;
+ 		in->valid = 1;
+ 		in->variantType = type;
+ 
+@@ -2293,10 +2326,10 @@ static yaffs_Object *yaffs_MknodObject(y
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_HARDLINK:
+ 			in->variant.hardLinkVariant.equivalentObject =
+-			    equivalentObject;
++				equivalentObject;
+ 			in->variant.hardLinkVariant.equivalentObjectId =
+-			    equivalentObject->objectId;
+-			list_add(&in->hardLinks, &equivalentObject->hardLinks);
++				equivalentObject->objectId;
++			ylist_add(&in->hardLinks, &equivalentObject->hardLinks);
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_FILE:
+ 		case YAFFS_OBJECT_TYPE_DIRECTORY:
+@@ -2308,7 +2341,7 @@ static yaffs_Object *yaffs_MknodObject(y
+ 
+ 		if (yaffs_UpdateObjectHeader(in, name, 0, 0, 0) < 0) {
+ 			/* Could not create the object header, fail the creation */
+-			yaffs_DestroyObject(in);
++			yaffs_DeleteObject(in);
+ 			in = NULL;
+ 		}
+ 
+@@ -2317,38 +2350,38 @@ static yaffs_Object *yaffs_MknodObject(y
+ 	return in;
+ }
+ 
+-yaffs_Object *yaffs_MknodFile(yaffs_Object * parent, const YCHAR * name,
+-			      __u32 mode, __u32 uid, __u32 gid)
++yaffs_Object *yaffs_MknodFile(yaffs_Object *parent, const YCHAR *name,
++			__u32 mode, __u32 uid, __u32 gid)
+ {
+ 	return yaffs_MknodObject(YAFFS_OBJECT_TYPE_FILE, parent, name, mode,
+-				 uid, gid, NULL, NULL, 0);
++				uid, gid, NULL, NULL, 0);
+ }
+ 
+-yaffs_Object *yaffs_MknodDirectory(yaffs_Object * parent, const YCHAR * name,
+-				   __u32 mode, __u32 uid, __u32 gid)
++yaffs_Object *yaffs_MknodDirectory(yaffs_Object *parent, const YCHAR *name,
++				__u32 mode, __u32 uid, __u32 gid)
+ {
+ 	return yaffs_MknodObject(YAFFS_OBJECT_TYPE_DIRECTORY, parent, name,
+ 				 mode, uid, gid, NULL, NULL, 0);
+ }
+ 
+-yaffs_Object *yaffs_MknodSpecial(yaffs_Object * parent, const YCHAR * name,
+-				 __u32 mode, __u32 uid, __u32 gid, __u32 rdev)
++yaffs_Object *yaffs_MknodSpecial(yaffs_Object *parent, const YCHAR *name,
++				__u32 mode, __u32 uid, __u32 gid, __u32 rdev)
+ {
+ 	return yaffs_MknodObject(YAFFS_OBJECT_TYPE_SPECIAL, parent, name, mode,
+ 				 uid, gid, NULL, NULL, rdev);
+ }
+ 
+-yaffs_Object *yaffs_MknodSymLink(yaffs_Object * parent, const YCHAR * name,
+-				 __u32 mode, __u32 uid, __u32 gid,
+-				 const YCHAR * alias)
++yaffs_Object *yaffs_MknodSymLink(yaffs_Object *parent, const YCHAR *name,
++				__u32 mode, __u32 uid, __u32 gid,
++				const YCHAR *alias)
+ {
+ 	return yaffs_MknodObject(YAFFS_OBJECT_TYPE_SYMLINK, parent, name, mode,
+-				 uid, gid, NULL, alias, 0);
++				uid, gid, NULL, alias, 0);
+ }
+ 
+ /* yaffs_Link returns the object id of the equivalent object.*/
+-yaffs_Object *yaffs_Link(yaffs_Object * parent, const YCHAR * name,
+-			 yaffs_Object * equivalentObject)
++yaffs_Object *yaffs_Link(yaffs_Object *parent, const YCHAR *name,
++			yaffs_Object *equivalentObject)
+ {
+ 	/* Get the real object in case we were fed a hard link as an equivalent object */
+ 	equivalentObject = yaffs_GetEquivalentObject(equivalentObject);
+@@ -2363,33 +2396,31 @@ yaffs_Object *yaffs_Link(yaffs_Object *
+ 
+ }
+ 
+-static int yaffs_ChangeObjectName(yaffs_Object * obj, yaffs_Object * newDir,
+-				  const YCHAR * newName, int force, int shadows)
++static int yaffs_ChangeObjectName(yaffs_Object *obj, yaffs_Object *newDir,
++				const YCHAR *newName, int force, int shadows)
+ {
+ 	int unlinkOp;
+ 	int deleteOp;
+ 
+ 	yaffs_Object *existingTarget;
+ 
+-	if (newDir == NULL) {
++	if (newDir == NULL)
+ 		newDir = obj->parent;	/* use the old directory */
+-	}
+ 
+ 	if (newDir->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 		T(YAFFS_TRACE_ALWAYS,
+ 		  (TSTR
+-		   ("tragendy: yaffs_ChangeObjectName: newDir is not a directory"
++		   ("tragedy: yaffs_ChangeObjectName: newDir is not a directory"
+ 		    TENDSTR)));
+ 		YBUG();
+ 	}
+ 
+ 	/* TODO: Do we need this different handling for YAFFS2 and YAFFS1?? */
+-	if (obj->myDev->isYaffs2) {
++	if (obj->myDev->isYaffs2)
+ 		unlinkOp = (newDir == obj->myDev->unlinkedDir);
+-	} else {
++	else
+ 		unlinkOp = (newDir == obj->myDev->unlinkedDir
+ 			    && obj->variantType == YAFFS_OBJECT_TYPE_FILE);
+-	}
+ 
+ 	deleteOp = (newDir == obj->myDev->deletedDir);
+ 
+@@ -2415,40 +2446,40 @@ static int yaffs_ChangeObjectName(yaffs_
+ 			obj->unlinked = 1;
+ 
+ 		/* If it is a deletion then we mark it as a shrink for gc purposes. */
+-		if (yaffs_UpdateObjectHeader(obj, newName, 0, deleteOp, shadows)>= 0)
++		if (yaffs_UpdateObjectHeader(obj, newName, 0, deleteOp, shadows) >= 0)
+ 			return YAFFS_OK;
+ 	}
+ 
+ 	return YAFFS_FAIL;
+ }
+ 
+-int yaffs_RenameObject(yaffs_Object * oldDir, const YCHAR * oldName,
+-		       yaffs_Object * newDir, const YCHAR * newName)
++int yaffs_RenameObject(yaffs_Object *oldDir, const YCHAR *oldName,
++		yaffs_Object *newDir, const YCHAR *newName)
+ {
+-	yaffs_Object *obj;
+-	yaffs_Object *existingTarget;
++	yaffs_Object *obj = NULL;
++	yaffs_Object *existingTarget = NULL;
+ 	int force = 0;
+ 
++
++	if (!oldDir || oldDir->variantType != YAFFS_OBJECT_TYPE_DIRECTORY)
++		YBUG();
++	if (!newDir || newDir->variantType != YAFFS_OBJECT_TYPE_DIRECTORY)
++		YBUG();
++
+ #ifdef CONFIG_YAFFS_CASE_INSENSITIVE
+ 	/* Special case for case insemsitive systems (eg. WinCE).
+ 	 * While look-up is case insensitive, the name isn't.
+ 	 * Therefore we might want to change x.txt to X.txt
+ 	*/
+-	if (oldDir == newDir && yaffs_strcmp(oldName, newName) == 0) {
++	if (oldDir == newDir && yaffs_strcmp(oldName, newName) == 0)
+ 		force = 1;
+-	}
+ #endif
+ 
++	else if (yaffs_strlen(newName) > YAFFS_MAX_NAME_LENGTH)
++		/* ENAMETOOLONG */
++		return YAFFS_FAIL;
++
+ 	obj = yaffs_FindObjectByName(oldDir, oldName);
+-	/* Check new name to long. */
+-	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK &&
+-	    yaffs_strlen(newName) > YAFFS_MAX_ALIAS_LENGTH)
+-	  /* ENAMETOOLONG */
+-	  return YAFFS_FAIL;
+-	else if (obj->variantType != YAFFS_OBJECT_TYPE_SYMLINK &&
+-		 yaffs_strlen(newName) > YAFFS_MAX_NAME_LENGTH)
+-	  /* ENAMETOOLONG */
+-	  return YAFFS_FAIL;
+ 
+ 	if (obj && obj->renameAllowed) {
+ 
+@@ -2456,8 +2487,8 @@ int yaffs_RenameObject(yaffs_Object * ol
+ 
+ 		existingTarget = yaffs_FindObjectByName(newDir, newName);
+ 		if (existingTarget &&
+-		    existingTarget->variantType == YAFFS_OBJECT_TYPE_DIRECTORY &&
+-		    !list_empty(&existingTarget->variant.directoryVariant.children)) {
++			existingTarget->variantType == YAFFS_OBJECT_TYPE_DIRECTORY &&
++			!ylist_empty(&existingTarget->variant.directoryVariant.children)) {
+ 			/* There is a target that is a non-empty directory, so we fail */
+ 			return YAFFS_FAIL;	/* EEXIST or ENOTEMPTY */
+ 		} else if (existingTarget && existingTarget != obj) {
+@@ -2465,7 +2496,7 @@ int yaffs_RenameObject(yaffs_Object * ol
+ 			 * but only if it isn't the same object
+ 			 */
+ 			yaffs_ChangeObjectName(obj, newDir, newName, force,
+-					       existingTarget->objectId);
++						existingTarget->objectId);
+ 			yaffs_UnlinkObject(existingTarget);
+ 		}
+ 
+@@ -2476,7 +2507,7 @@ int yaffs_RenameObject(yaffs_Object * ol
+ 
+ /*------------------------- Block Management and Page Allocation ----------------*/
+ 
+-static int yaffs_InitialiseBlocks(yaffs_Device * dev)
++static int yaffs_InitialiseBlocks(yaffs_Device *dev)
+ {
+ 	int nBlocks = dev->internalEndBlock - dev->internalStartBlock + 1;
+ 
+@@ -2487,23 +2518,20 @@ static int yaffs_InitialiseBlocks(yaffs_
+ 
+ 	/* If the first allocation strategy fails, thry the alternate one */
+ 	dev->blockInfo = YMALLOC(nBlocks * sizeof(yaffs_BlockInfo));
+-	if(!dev->blockInfo){
++	if (!dev->blockInfo) {
+ 		dev->blockInfo = YMALLOC_ALT(nBlocks * sizeof(yaffs_BlockInfo));
+ 		dev->blockInfoAlt = 1;
+-	}
+-	else
++	} else
+ 		dev->blockInfoAlt = 0;
+ 
+-	if(dev->blockInfo){
+-
++	if (dev->blockInfo) {
+ 		/* Set up dynamic blockinfo stuff. */
+ 		dev->chunkBitmapStride = (dev->nChunksPerBlock + 7) / 8; /* round up bytes */
+ 		dev->chunkBits = YMALLOC(dev->chunkBitmapStride * nBlocks);
+-		if(!dev->chunkBits){
++		if (!dev->chunkBits) {
+ 			dev->chunkBits = YMALLOC_ALT(dev->chunkBitmapStride * nBlocks);
+ 			dev->chunkBitsAlt = 1;
+-		}
+-		else
++		} else
+ 			dev->chunkBitsAlt = 0;
+ 	}
+ 
+@@ -2514,30 +2542,29 @@ static int yaffs_InitialiseBlocks(yaffs_
+ 	}
+ 
+ 	return YAFFS_FAIL;
+-
+ }
+ 
+-static void yaffs_DeinitialiseBlocks(yaffs_Device * dev)
++static void yaffs_DeinitialiseBlocks(yaffs_Device *dev)
+ {
+-	if(dev->blockInfoAlt && dev->blockInfo)
++	if (dev->blockInfoAlt && dev->blockInfo)
+ 		YFREE_ALT(dev->blockInfo);
+-	else if(dev->blockInfo)
++	else if (dev->blockInfo)
+ 		YFREE(dev->blockInfo);
+ 
+ 	dev->blockInfoAlt = 0;
+ 
+ 	dev->blockInfo = NULL;
+ 
+-	if(dev->chunkBitsAlt && dev->chunkBits)
++	if (dev->chunkBitsAlt && dev->chunkBits)
+ 		YFREE_ALT(dev->chunkBits);
+-	else if(dev->chunkBits)
++	else if (dev->chunkBits)
+ 		YFREE(dev->chunkBits);
+ 	dev->chunkBitsAlt = 0;
+ 	dev->chunkBits = NULL;
+ }
+ 
+-static int yaffs_BlockNotDisqualifiedFromGC(yaffs_Device * dev,
+-					    yaffs_BlockInfo * bi)
++static int yaffs_BlockNotDisqualifiedFromGC(yaffs_Device *dev,
++					yaffs_BlockInfo *bi)
+ {
+ 	int i;
+ 	__u32 seq;
+@@ -2556,7 +2583,7 @@ static int yaffs_BlockNotDisqualifiedFro
+ 		seq = dev->sequenceNumber;
+ 
+ 		for (i = dev->internalStartBlock; i <= dev->internalEndBlock;
+-		     i++) {
++				i++) {
+ 			b = yaffs_GetBlockInfo(dev, i);
+ 			if (b->blockState == YAFFS_BLOCK_STATE_FULL &&
+ 			    (b->pagesInUse - b->softDeletions) <
+@@ -2571,38 +2598,36 @@ static int yaffs_BlockNotDisqualifiedFro
+ 	 * discarded pages.
+ 	 */
+ 	return (bi->sequenceNumber <= dev->oldestDirtySequence);
+-
+ }
+ 
+ /* FindDiretiestBlock is used to select the dirtiest block (or close enough)
+  * for garbage collection.
+  */
+ 
+-static int yaffs_FindBlockForGarbageCollection(yaffs_Device * dev,
+-					       int aggressive)
++static int yaffs_FindBlockForGarbageCollection(yaffs_Device *dev,
++					int aggressive)
+ {
+-
+ 	int b = dev->currentDirtyChecker;
+ 
+ 	int i;
+ 	int iterations;
+ 	int dirtiest = -1;
+ 	int pagesInUse = 0;
+-	int prioritised=0;
++	int prioritised = 0;
+ 	yaffs_BlockInfo *bi;
+ 	int pendingPrioritisedExist = 0;
+ 
+ 	/* First let's see if we need to grab a prioritised block */
+-	if(dev->hasPendingPrioritisedGCs){
+-		for(i = dev->internalStartBlock; i < dev->internalEndBlock && !prioritised; i++){
++	if (dev->hasPendingPrioritisedGCs) {
++		for (i = dev->internalStartBlock; i < dev->internalEndBlock && !prioritised; i++) {
+ 
+ 			bi = yaffs_GetBlockInfo(dev, i);
+-			//yaffs_VerifyBlock(dev,bi,i);
++			/* yaffs_VerifyBlock(dev,bi,i); */
+ 
+-			if(bi->gcPrioritise) {
++			if (bi->gcPrioritise) {
+ 				pendingPrioritisedExist = 1;
+-				if(bi->blockState == YAFFS_BLOCK_STATE_FULL &&
+-				   yaffs_BlockNotDisqualifiedFromGC(dev, bi)){
++				if (bi->blockState == YAFFS_BLOCK_STATE_FULL &&
++				   yaffs_BlockNotDisqualifiedFromGC(dev, bi)) {
+ 					pagesInUse = (bi->pagesInUse - bi->softDeletions);
+ 					dirtiest = i;
+ 					prioritised = 1;
+@@ -2611,7 +2636,7 @@ static int yaffs_FindBlockForGarbageColl
+ 			}
+ 		}
+ 
+-		if(!pendingPrioritisedExist) /* None found, so we can clear this */
++		if (!pendingPrioritisedExist) /* None found, so we can clear this */
+ 			dev->hasPendingPrioritisedGCs = 0;
+ 	}
+ 
+@@ -2623,31 +2648,28 @@ static int yaffs_FindBlockForGarbageColl
+ 
+ 	dev->nonAggressiveSkip--;
+ 
+-	if (!aggressive && (dev->nonAggressiveSkip > 0)) {
++	if (!aggressive && (dev->nonAggressiveSkip > 0))
+ 		return -1;
+-	}
+ 
+-	if(!prioritised)
++	if (!prioritised)
+ 		pagesInUse =
+-	    		(aggressive) ? dev->nChunksPerBlock : YAFFS_PASSIVE_GC_CHUNKS + 1;
++			(aggressive) ? dev->nChunksPerBlock : YAFFS_PASSIVE_GC_CHUNKS + 1;
+ 
+-	if (aggressive) {
++	if (aggressive)
+ 		iterations =
+ 		    dev->internalEndBlock - dev->internalStartBlock + 1;
+-	} else {
++	else {
+ 		iterations =
+ 		    dev->internalEndBlock - dev->internalStartBlock + 1;
+ 		iterations = iterations / 16;
+-		if (iterations > 200) {
++		if (iterations > 200)
+ 			iterations = 200;
+-		}
+ 	}
+ 
+ 	for (i = 0; i <= iterations && pagesInUse > 0 && !prioritised; i++) {
+ 		b++;
+-		if (b < dev->internalStartBlock || b > dev->internalEndBlock) {
++		if (b < dev->internalStartBlock || b > dev->internalEndBlock)
+ 			b = dev->internalStartBlock;
+-		}
+ 
+ 		if (b < dev->internalStartBlock || b > dev->internalEndBlock) {
+ 			T(YAFFS_TRACE_ERROR,
+@@ -2657,17 +2679,9 @@ static int yaffs_FindBlockForGarbageColl
+ 
+ 		bi = yaffs_GetBlockInfo(dev, b);
+ 
+-#if 0
+-		if (bi->blockState == YAFFS_BLOCK_STATE_CHECKPOINT) {
+-			dirtiest = b;
+-			pagesInUse = 0;
+-		}
+-		else
+-#endif
+-
+ 		if (bi->blockState == YAFFS_BLOCK_STATE_FULL &&
+-		       (bi->pagesInUse - bi->softDeletions) < pagesInUse &&
+-		        yaffs_BlockNotDisqualifiedFromGC(dev, bi)) {
++			(bi->pagesInUse - bi->softDeletions) < pagesInUse &&
++				yaffs_BlockNotDisqualifiedFromGC(dev, bi)) {
+ 			dirtiest = b;
+ 			pagesInUse = (bi->pagesInUse - bi->softDeletions);
+ 		}
+@@ -2678,19 +2692,18 @@ static int yaffs_FindBlockForGarbageColl
+ 	if (dirtiest > 0) {
+ 		T(YAFFS_TRACE_GC,
+ 		  (TSTR("GC Selected block %d with %d free, prioritised:%d" TENDSTR), dirtiest,
+-		   dev->nChunksPerBlock - pagesInUse,prioritised));
++		   dev->nChunksPerBlock - pagesInUse, prioritised));
+ 	}
+ 
+ 	dev->oldestDirtySequence = 0;
+ 
+-	if (dirtiest > 0) {
++	if (dirtiest > 0)
+ 		dev->nonAggressiveSkip = 4;
+-	}
+ 
+ 	return dirtiest;
+ }
+ 
+-static void yaffs_BlockBecameDirty(yaffs_Device * dev, int blockNo)
++static void yaffs_BlockBecameDirty(yaffs_Device *dev, int blockNo)
+ {
+ 	yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, blockNo);
+ 
+@@ -2752,7 +2765,7 @@ static void yaffs_BlockBecameDirty(yaffs
+ 	}
+ }
+ 
+-static int yaffs_FindBlockForAllocation(yaffs_Device * dev)
++static int yaffs_FindBlockForAllocation(yaffs_Device *dev)
+ {
+ 	int i;
+ 
+@@ -2763,7 +2776,7 @@ static int yaffs_FindBlockForAllocation(
+ 		 * Can't get space to gc
+ 		 */
+ 		T(YAFFS_TRACE_ERROR,
+-		  (TSTR("yaffs tragedy: no more eraased blocks" TENDSTR)));
++		  (TSTR("yaffs tragedy: no more erased blocks" TENDSTR)));
+ 
+ 		return -1;
+ 	}
+@@ -2794,31 +2807,74 @@ static int yaffs_FindBlockForAllocation(
+ 
+ 	T(YAFFS_TRACE_ALWAYS,
+ 	  (TSTR
+-	   ("yaffs tragedy: no more eraased blocks, but there should have been %d"
++	   ("yaffs tragedy: no more erased blocks, but there should have been %d"
+ 	    TENDSTR), dev->nErasedBlocks));
+ 
+ 	return -1;
+ }
+ 
+ 
+-// Check if there's space to allocate...
+-// Thinks.... do we need top make this ths same as yaffs_GetFreeChunks()?
+-static int yaffs_CheckSpaceForAllocation(yaffs_Device * dev)
++
++static int yaffs_CalcCheckpointBlocksRequired(yaffs_Device *dev)
++{
++	if (!dev->nCheckpointBlocksRequired &&
++	   dev->isYaffs2) {
++		/* Not a valid value so recalculate */
++		int nBytes = 0;
++		int nBlocks;
++		int devBlocks = (dev->endBlock - dev->startBlock + 1);
++		int tnodeSize;
++
++		tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
++
++		if (tnodeSize < sizeof(yaffs_Tnode))
++			tnodeSize = sizeof(yaffs_Tnode);
++
++		nBytes += sizeof(yaffs_CheckpointValidity);
++		nBytes += sizeof(yaffs_CheckpointDevice);
++		nBytes += devBlocks * sizeof(yaffs_BlockInfo);
++		nBytes += devBlocks * dev->chunkBitmapStride;
++		nBytes += (sizeof(yaffs_CheckpointObject) + sizeof(__u32)) * (dev->nObjectsCreated - dev->nFreeObjects);
++		nBytes += (tnodeSize + sizeof(__u32)) * (dev->nTnodesCreated - dev->nFreeTnodes);
++		nBytes += sizeof(yaffs_CheckpointValidity);
++		nBytes += sizeof(__u32); /* checksum*/
++
++		/* Round up and add 2 blocks to allow for some bad blocks, so add 3 */
++
++		nBlocks = (nBytes/(dev->nDataBytesPerChunk * dev->nChunksPerBlock)) + 3;
++
++		dev->nCheckpointBlocksRequired = nBlocks;
++	}
++
++	return dev->nCheckpointBlocksRequired;
++}
++
++/*
++ * Check if there's space to allocate...
++ * Thinks.... do we need top make this ths same as yaffs_GetFreeChunks()?
++ */
++static int yaffs_CheckSpaceForAllocation(yaffs_Device *dev)
+ {
+ 	int reservedChunks;
+ 	int reservedBlocks = dev->nReservedBlocks;
+ 	int checkpointBlocks;
+ 
+-	checkpointBlocks =  dev->nCheckpointReservedBlocks - dev->blocksInCheckpoint;
+-	if(checkpointBlocks < 0)
++	if (dev->isYaffs2) {
++		checkpointBlocks =  yaffs_CalcCheckpointBlocksRequired(dev) -
++				    dev->blocksInCheckpoint;
++		if (checkpointBlocks < 0)
++			checkpointBlocks = 0;
++	} else {
+ 		checkpointBlocks = 0;
++	}
+ 
+ 	reservedChunks = ((reservedBlocks + checkpointBlocks) * dev->nChunksPerBlock);
+ 
+ 	return (dev->nFreeChunks > reservedChunks);
+ }
+ 
+-static int yaffs_AllocateChunk(yaffs_Device * dev, int useReserve, yaffs_BlockInfo **blockUsedPtr)
++static int yaffs_AllocateChunk(yaffs_Device *dev, int useReserve,
++		yaffs_BlockInfo **blockUsedPtr)
+ {
+ 	int retVal;
+ 	yaffs_BlockInfo *bi;
+@@ -2835,7 +2891,7 @@ static int yaffs_AllocateChunk(yaffs_Dev
+ 	}
+ 
+ 	if (dev->nErasedBlocks < dev->nReservedBlocks
+-	    && dev->allocationPage == 0) {
++			&& dev->allocationPage == 0) {
+ 		T(YAFFS_TRACE_ALLOCATE, (TSTR("Allocating reserve" TENDSTR)));
+ 	}
+ 
+@@ -2844,10 +2900,10 @@ static int yaffs_AllocateChunk(yaffs_Dev
+ 		bi = yaffs_GetBlockInfo(dev, dev->allocationBlock);
+ 
+ 		retVal = (dev->allocationBlock * dev->nChunksPerBlock) +
+-		    dev->allocationPage;
++			dev->allocationPage;
+ 		bi->pagesInUse++;
+ 		yaffs_SetChunkBit(dev, dev->allocationBlock,
+-				  dev->allocationPage);
++				dev->allocationPage);
+ 
+ 		dev->allocationPage++;
+ 
+@@ -2859,43 +2915,43 @@ static int yaffs_AllocateChunk(yaffs_Dev
+ 			dev->allocationBlock = -1;
+ 		}
+ 
+-		if(blockUsedPtr)
++		if (blockUsedPtr)
+ 			*blockUsedPtr = bi;
+ 
+ 		return retVal;
+ 	}
+ 
+ 	T(YAFFS_TRACE_ERROR,
+-	  (TSTR("!!!!!!!!! Allocator out !!!!!!!!!!!!!!!!!" TENDSTR)));
++			(TSTR("!!!!!!!!! Allocator out !!!!!!!!!!!!!!!!!" TENDSTR)));
+ 
+ 	return -1;
+ }
+ 
+-static int yaffs_GetErasedChunks(yaffs_Device * dev)
++static int yaffs_GetErasedChunks(yaffs_Device *dev)
+ {
+ 	int n;
+ 
+ 	n = dev->nErasedBlocks * dev->nChunksPerBlock;
+ 
+-	if (dev->allocationBlock > 0) {
++	if (dev->allocationBlock > 0)
+ 		n += (dev->nChunksPerBlock - dev->allocationPage);
+-	}
+ 
+ 	return n;
+ 
+ }
+ 
+-static int yaffs_GarbageCollectBlock(yaffs_Device * dev, int block)
++static int yaffs_GarbageCollectBlock(yaffs_Device *dev, int block,
++		int wholeBlock)
+ {
+ 	int oldChunk;
+ 	int newChunk;
+-	int chunkInBlock;
+ 	int markNAND;
+ 	int retVal = YAFFS_OK;
+ 	int cleanups = 0;
+ 	int i;
+ 	int isCheckpointBlock;
+ 	int matchingChunk;
++	int maxCopies;
+ 
+ 	int chunksBefore = yaffs_GetErasedChunks(dev);
+ 	int chunksAfter;
+@@ -2911,8 +2967,11 @@ static int yaffs_GarbageCollectBlock(yaf
+ 	bi->blockState = YAFFS_BLOCK_STATE_COLLECTING;
+ 
+ 	T(YAFFS_TRACE_TRACING,
+-	  (TSTR("Collecting block %d, in use %d, shrink %d, " TENDSTR), block,
+-	   bi->pagesInUse, bi->hasShrinkHeader));
++			(TSTR("Collecting block %d, in use %d, shrink %d, wholeBlock %d" TENDSTR),
++			 block,
++			 bi->pagesInUse,
++			 bi->hasShrinkHeader,
++			 wholeBlock));
+ 
+ 	/*yaffs_VerifyFreeChunks(dev); */
+ 
+@@ -2926,26 +2985,33 @@ static int yaffs_GarbageCollectBlock(yaf
+ 	dev->isDoingGC = 1;
+ 
+ 	if (isCheckpointBlock ||
+-	    !yaffs_StillSomeChunkBits(dev, block)) {
++			!yaffs_StillSomeChunkBits(dev, block)) {
+ 		T(YAFFS_TRACE_TRACING,
+-		  (TSTR
+-		   ("Collecting block %d that has no chunks in use" TENDSTR),
+-		   block));
++				(TSTR
++				 ("Collecting block %d that has no chunks in use" TENDSTR),
++				 block));
+ 		yaffs_BlockBecameDirty(dev, block);
+ 	} else {
+ 
+ 		__u8 *buffer = yaffs_GetTempBuffer(dev, __LINE__);
+ 
+-		yaffs_VerifyBlock(dev,bi,block);
++		yaffs_VerifyBlock(dev, bi, block);
+ 
+-		for (chunkInBlock = 0, oldChunk = block * dev->nChunksPerBlock;
+-		     chunkInBlock < dev->nChunksPerBlock
+-		     && yaffs_StillSomeChunkBits(dev, block);
+-		     chunkInBlock++, oldChunk++) {
+-			if (yaffs_CheckChunkBit(dev, block, chunkInBlock)) {
++		maxCopies = (wholeBlock) ? dev->nChunksPerBlock : 10;
++		oldChunk = block * dev->nChunksPerBlock + dev->gcChunk;
++
++		for (/* init already done */;
++		     retVal == YAFFS_OK &&
++		     dev->gcChunk < dev->nChunksPerBlock &&
++		     (bi->blockState == YAFFS_BLOCK_STATE_COLLECTING) &&
++		     maxCopies > 0;
++		     dev->gcChunk++, oldChunk++) {
++			if (yaffs_CheckChunkBit(dev, block, dev->gcChunk)) {
+ 
+ 				/* This page is in use and might need to be copied off */
+ 
++				maxCopies--;
++
+ 				markNAND = 1;
+ 
+ 				yaffs_InitialiseTags(&tags);
+@@ -2959,22 +3025,22 @@ static int yaffs_GarbageCollectBlock(yaf
+ 
+ 				T(YAFFS_TRACE_GC_DETAIL,
+ 				  (TSTR
+-				   ("Collecting page %d, %d %d %d " TENDSTR),
+-				   chunkInBlock, tags.objectId, tags.chunkId,
++				   ("Collecting chunk in block %d, %d %d %d " TENDSTR),
++				   dev->gcChunk, tags.objectId, tags.chunkId,
+ 				   tags.byteCount));
+ 
+-				if(object && !yaffs_SkipVerification(dev)){
+-					if(tags.chunkId == 0)
+-						matchingChunk = object->chunkId;
+-					else if(object->softDeleted)
++				if (object && !yaffs_SkipVerification(dev)) {
++					if (tags.chunkId == 0)
++						matchingChunk = object->hdrChunk;
++					else if (object->softDeleted)
+ 						matchingChunk = oldChunk; /* Defeat the test */
+ 					else
+-						matchingChunk = yaffs_FindChunkInFile(object,tags.chunkId,NULL);
++						matchingChunk = yaffs_FindChunkInFile(object, tags.chunkId, NULL);
+ 
+-					if(oldChunk != matchingChunk)
++					if (oldChunk != matchingChunk)
+ 						T(YAFFS_TRACE_ERROR,
+ 						  (TSTR("gc: page in gc mismatch: %d %d %d %d"TENDSTR),
+-						  oldChunk,matchingChunk,tags.objectId, tags.chunkId));
++						  oldChunk, matchingChunk, tags.objectId, tags.chunkId));
+ 
+ 				}
+ 
+@@ -2986,9 +3052,11 @@ static int yaffs_GarbageCollectBlock(yaf
+ 					    tags.objectId, tags.chunkId, tags.byteCount));
+ 				}
+ 
+-				if (object && object->deleted
+-				    && tags.chunkId != 0) {
+-					/* Data chunk in a deleted file, throw it away
++				if (object &&
++				    object->deleted &&
++				    object->softDeleted &&
++				    tags.chunkId != 0) {
++					/* Data chunk in a soft deleted file, throw it away
+ 					 * It's a soft deleted data chunk,
+ 					 * No need to copy this, just forget about it and
+ 					 * fix up the object.
+@@ -3003,13 +3071,12 @@ static int yaffs_GarbageCollectBlock(yaf
+ 						cleanups++;
+ 					}
+ 					markNAND = 0;
+-				} else if (0
+-					   /* Todo object && object->deleted && object->nDataChunks == 0 */
+-					   ) {
++				} else if (0) {
++					/* Todo object && object->deleted && object->nDataChunks == 0 */
+ 					/* Deleted object header with no data chunks.
+ 					 * Can be discarded and the file deleted.
+ 					 */
+-					object->chunkId = 0;
++					object->hdrChunk = 0;
+ 					yaffs_FreeTnode(object->myDev,
+ 							object->variant.
+ 							fileVariant.top);
+@@ -3031,17 +3098,14 @@ static int yaffs_GarbageCollectBlock(yaf
+ 						 * We need to nuke the shrinkheader flags first
+ 						 * We no longer want the shrinkHeader flag since its work is done
+ 						 * and if it is left in place it will mess up scanning.
+-						 * Also, clear out any shadowing stuff
+ 						 */
+ 
+ 						yaffs_ObjectHeader *oh;
+ 						oh = (yaffs_ObjectHeader *)buffer;
+ 						oh->isShrink = 0;
+-						oh->shadowsObject = -1;
+-						tags.extraShadows = 0;
+ 						tags.extraIsShrinkHeader = 0;
+ 
+-						yaffs_VerifyObjectHeader(object,oh,&tags,1);
++						yaffs_VerifyObjectHeader(object, oh, &tags, 1);
+ 					}
+ 
+ 					newChunk =
+@@ -3055,7 +3119,7 @@ static int yaffs_GarbageCollectBlock(yaf
+ 
+ 						if (tags.chunkId == 0) {
+ 							/* It's a header */
+-							object->chunkId =  newChunk;
++							object->hdrChunk =  newChunk;
+ 							object->serial =   tags.serialNumber;
+ 						} else {
+ 							/* It's a data chunk */
+@@ -3067,7 +3131,8 @@ static int yaffs_GarbageCollectBlock(yaf
+ 					}
+ 				}
+ 
+-				yaffs_DeleteChunk(dev, oldChunk, markNAND, __LINE__);
++				if (retVal == YAFFS_OK)
++					yaffs_DeleteChunk(dev, oldChunk, markNAND, __LINE__);
+ 
+ 			}
+ 		}
+@@ -3098,18 +3163,25 @@ static int yaffs_GarbageCollectBlock(yaf
+ 
+ 	}
+ 
+-	yaffs_VerifyCollectedBlock(dev,bi,block);
++	yaffs_VerifyCollectedBlock(dev, bi, block);
+ 
+-	if (chunksBefore >= (chunksAfter = yaffs_GetErasedChunks(dev))) {
++	chunksAfter = yaffs_GetErasedChunks(dev);
++	if (chunksBefore >= chunksAfter) {
+ 		T(YAFFS_TRACE_GC,
+ 		  (TSTR
+ 		   ("gc did not increase free chunks before %d after %d"
+ 		    TENDSTR), chunksBefore, chunksAfter));
+ 	}
+ 
++	/* If the gc completed then clear the current gcBlock so that we find another. */
++	if (bi->blockState != YAFFS_BLOCK_STATE_COLLECTING) {
++		dev->gcBlock = -1;
++		dev->gcChunk = 0;
++	}
++
+ 	dev->isDoingGC = 0;
+ 
+-	return YAFFS_OK;
++	return retVal;
+ }
+ 
+ /* New garbage collector
+@@ -3121,7 +3193,7 @@ static int yaffs_GarbageCollectBlock(yaf
+  * The idea is to help clear out space in a more spread-out manner.
+  * Dunno if it really does anything useful.
+  */
+-static int yaffs_CheckGarbageCollection(yaffs_Device * dev)
++static int yaffs_CheckGarbageCollection(yaffs_Device *dev)
+ {
+ 	int block;
+ 	int aggressive;
+@@ -3142,8 +3214,8 @@ static int yaffs_CheckGarbageCollection(
+ 	do {
+ 		maxTries++;
+ 
+-		checkpointBlockAdjust = (dev->nCheckpointReservedBlocks - dev->blocksInCheckpoint);
+-		if(checkpointBlockAdjust < 0)
++		checkpointBlockAdjust = yaffs_CalcCheckpointBlocksRequired(dev) - dev->blocksInCheckpoint;
++		if (checkpointBlockAdjust < 0)
+ 			checkpointBlockAdjust = 0;
+ 
+ 		if (dev->nErasedBlocks < (dev->nReservedBlocks + checkpointBlockAdjust + 2)) {
+@@ -3154,20 +3226,24 @@ static int yaffs_CheckGarbageCollection(
+ 			aggressive = 0;
+ 		}
+ 
+-		block = yaffs_FindBlockForGarbageCollection(dev, aggressive);
++		if (dev->gcBlock <= 0) {
++			dev->gcBlock = yaffs_FindBlockForGarbageCollection(dev, aggressive);
++			dev->gcChunk = 0;
++		}
++
++		block = dev->gcBlock;
+ 
+ 		if (block > 0) {
+ 			dev->garbageCollections++;
+-			if (!aggressive) {
++			if (!aggressive)
+ 				dev->passiveGarbageCollections++;
+-			}
+ 
+ 			T(YAFFS_TRACE_GC,
+ 			  (TSTR
+ 			   ("yaffs: GC erasedBlocks %d aggressive %d" TENDSTR),
+ 			   dev->nErasedBlocks, aggressive));
+ 
+-			gcOk = yaffs_GarbageCollectBlock(dev, block);
++			gcOk = yaffs_GarbageCollectBlock(dev, block, aggressive);
+ 		}
+ 
+ 		if (dev->nErasedBlocks < (dev->nReservedBlocks) && block > 0) {
+@@ -3176,15 +3252,16 @@ static int yaffs_CheckGarbageCollection(
+ 			   ("yaffs: GC !!!no reclaim!!! erasedBlocks %d after try %d block %d"
+ 			    TENDSTR), dev->nErasedBlocks, maxTries, block));
+ 		}
+-	} while ((dev->nErasedBlocks < dev->nReservedBlocks) && (block > 0)
+-		 && (maxTries < 2));
++	} while ((dev->nErasedBlocks < dev->nReservedBlocks) &&
++		 (block > 0) &&
++		 (maxTries < 2));
+ 
+ 	return aggressive ? gcOk : YAFFS_OK;
+ }
+ 
+ /*-------------------------  TAGS --------------------------------*/
+ 
+-static int yaffs_TagsMatch(const yaffs_ExtendedTags * tags, int objectId,
++static int yaffs_TagsMatch(const yaffs_ExtendedTags *tags, int objectId,
+ 			   int chunkInObject)
+ {
+ 	return (tags->chunkId == chunkInObject &&
+@@ -3195,8 +3272,8 @@ static int yaffs_TagsMatch(const yaffs_E
+ 
+ /*-------------------- Data file manipulation -----------------*/
+ 
+-static int yaffs_FindChunkInFile(yaffs_Object * in, int chunkInInode,
+-				 yaffs_ExtendedTags * tags)
++static int yaffs_FindChunkInFile(yaffs_Object *in, int chunkInInode,
++				 yaffs_ExtendedTags *tags)
+ {
+ 	/*Get the Tnode, then get the level 0 offset chunk offset */
+ 	yaffs_Tnode *tn;
+@@ -3214,7 +3291,7 @@ static int yaffs_FindChunkInFile(yaffs_O
+ 	tn = yaffs_FindLevel0Tnode(dev, &in->variant.fileVariant, chunkInInode);
+ 
+ 	if (tn) {
+-		theChunk = yaffs_GetChunkGroupBase(dev,tn,chunkInInode);
++		theChunk = yaffs_GetChunkGroupBase(dev, tn, chunkInInode);
+ 
+ 		retVal =
+ 		    yaffs_FindChunkInGroup(dev, theChunk, tags, in->objectId,
+@@ -3223,8 +3300,8 @@ static int yaffs_FindChunkInFile(yaffs_O
+ 	return retVal;
+ }
+ 
+-static int yaffs_FindAndDeleteChunkInFile(yaffs_Object * in, int chunkInInode,
+-					  yaffs_ExtendedTags * tags)
++static int yaffs_FindAndDeleteChunkInFile(yaffs_Object *in, int chunkInInode,
++					  yaffs_ExtendedTags *tags)
+ {
+ 	/* Get the Tnode, then get the level 0 offset chunk offset */
+ 	yaffs_Tnode *tn;
+@@ -3243,29 +3320,23 @@ static int yaffs_FindAndDeleteChunkInFil
+ 
+ 	if (tn) {
+ 
+-		theChunk = yaffs_GetChunkGroupBase(dev,tn,chunkInInode);
++		theChunk = yaffs_GetChunkGroupBase(dev, tn, chunkInInode);
+ 
+ 		retVal =
+ 		    yaffs_FindChunkInGroup(dev, theChunk, tags, in->objectId,
+ 					   chunkInInode);
+ 
+ 		/* Delete the entry in the filestructure (if found) */
+-		if (retVal != -1) {
+-			yaffs_PutLevel0Tnode(dev,tn,chunkInInode,0);
+-		}
+-	} else {
+-		/*T(("No level 0 found for %d\n", chunkInInode)); */
++		if (retVal != -1)
++			yaffs_PutLevel0Tnode(dev, tn, chunkInInode, 0);
+ 	}
+ 
+-	if (retVal == -1) {
+-		/* T(("Could not find %d to delete\n",chunkInInode)); */
+-	}
+ 	return retVal;
+ }
+ 
+ #ifdef YAFFS_PARANOID
+ 
+-static int yaffs_CheckFileSanity(yaffs_Object * in)
++static int yaffs_CheckFileSanity(yaffs_Object *in)
+ {
+ 	int chunk;
+ 	int nChunks;
+@@ -3278,10 +3349,8 @@ static int yaffs_CheckFileSanity(yaffs_O
+ 	int theChunk;
+ 	int chunkDeleted;
+ 
+-	if (in->variantType != YAFFS_OBJECT_TYPE_FILE) {
+-		/* T(("Object not a file\n")); */
++	if (in->variantType != YAFFS_OBJECT_TYPE_FILE)
+ 		return YAFFS_FAIL;
+-	}
+ 
+ 	objId = in->objectId;
+ 	fSize = in->variant.fileVariant.fileSize;
+@@ -3294,7 +3363,7 @@ static int yaffs_CheckFileSanity(yaffs_O
+ 
+ 		if (tn) {
+ 
+-			theChunk = yaffs_GetChunkGroupBase(dev,tn,chunk);
++			theChunk = yaffs_GetChunkGroupBase(dev, tn, chunk);
+ 
+ 			if (yaffs_CheckChunkBits
+ 			    (dev, theChunk / dev->nChunksPerBlock,
+@@ -3323,7 +3392,7 @@ static int yaffs_CheckFileSanity(yaffs_O
+ 
+ #endif
+ 
+-static int yaffs_PutChunkIntoFile(yaffs_Object * in, int chunkInInode,
++static int yaffs_PutChunkIntoFile(yaffs_Object *in, int chunkInInode,
+ 				  int chunkInNAND, int inScan)
+ {
+ 	/* NB inScan is zero unless scanning.
+@@ -3358,11 +3427,10 @@ static int yaffs_PutChunkIntoFile(yaffs_
+ 					&in->variant.fileVariant,
+ 					chunkInInode,
+ 					NULL);
+-	if (!tn) {
++	if (!tn)
+ 		return YAFFS_FAIL;
+-	}
+ 
+-	existingChunk = yaffs_GetChunkGroupBase(dev,tn,chunkInInode);
++	existingChunk = yaffs_GetChunkGroupBase(dev, tn, chunkInInode);
+ 
+ 	if (inScan != 0) {
+ 		/* If we're scanning then we need to test for duplicates
+@@ -3374,7 +3442,7 @@ static int yaffs_PutChunkIntoFile(yaffs_
+ 		 * Update: For backward scanning we don't need to re-read tags so this is quite cheap.
+ 		 */
+ 
+-		if (existingChunk != 0) {
++		if (existingChunk > 0) {
+ 			/* NB Right now existing chunk will not be real chunkId if the device >= 32MB
+ 			 *    thus we have to do a FindChunkInFile to get the real chunk id.
+ 			 *
+@@ -3411,8 +3479,10 @@ static int yaffs_PutChunkIntoFile(yaffs_
+ 			 * not be loaded during a scan
+ 			 */
+ 
+-			newSerial = newTags.serialNumber;
+-			existingSerial = existingTags.serialNumber;
++			if (inScan > 0) {
++				newSerial = newTags.serialNumber;
++				existingSerial = existingTags.serialNumber;
++			}
+ 
+ 			if ((inScan > 0) &&
+ 			    (in->myDev->isYaffs2 ||
+@@ -3437,24 +3507,23 @@ static int yaffs_PutChunkIntoFile(yaffs_
+ 
+ 	}
+ 
+-	if (existingChunk == 0) {
++	if (existingChunk == 0)
+ 		in->nDataChunks++;
+-	}
+ 
+-	yaffs_PutLevel0Tnode(dev,tn,chunkInInode,chunkInNAND);
++	yaffs_PutLevel0Tnode(dev, tn, chunkInInode, chunkInNAND);
+ 
+ 	return YAFFS_OK;
+ }
+ 
+-static int yaffs_ReadChunkDataFromObject(yaffs_Object * in, int chunkInInode,
+-					 __u8 * buffer)
++static int yaffs_ReadChunkDataFromObject(yaffs_Object *in, int chunkInInode,
++					__u8 *buffer)
+ {
+ 	int chunkInNAND = yaffs_FindChunkInFile(in, chunkInInode, NULL);
+ 
+-	if (chunkInNAND >= 0) {
++	if (chunkInNAND >= 0)
+ 		return yaffs_ReadChunkWithTagsFromNAND(in->myDev, chunkInNAND,
+-						       buffer,NULL);
+-	} else {
++						buffer, NULL);
++	else {
+ 		T(YAFFS_TRACE_NANDACCESS,
+ 		  (TSTR("Chunk %d not found zero instead" TENDSTR),
+ 		   chunkInNAND));
+@@ -3465,7 +3534,7 @@ static int yaffs_ReadChunkDataFromObject
+ 
+ }
+ 
+-void yaffs_DeleteChunk(yaffs_Device * dev, int chunkId, int markNAND, int lyn)
++void yaffs_DeleteChunk(yaffs_Device *dev, int chunkId, int markNAND, int lyn)
+ {
+ 	int block;
+ 	int page;
+@@ -3475,16 +3544,15 @@ void yaffs_DeleteChunk(yaffs_Device * de
+ 	if (chunkId <= 0)
+ 		return;
+ 
+-
+ 	dev->nDeletions++;
+ 	block = chunkId / dev->nChunksPerBlock;
+ 	page = chunkId % dev->nChunksPerBlock;
+ 
+ 
+-	if(!yaffs_CheckChunkBit(dev,block,page))
++	if (!yaffs_CheckChunkBit(dev, block, page))
+ 		T(YAFFS_TRACE_VERIFY,
+-		 	(TSTR("Deleting invalid chunk %d"TENDSTR),
+-		 	 chunkId));
++			(TSTR("Deleting invalid chunk %d"TENDSTR),
++			 chunkId));
+ 
+ 	bi = yaffs_GetBlockInfo(dev, block);
+ 
+@@ -3524,14 +3592,12 @@ void yaffs_DeleteChunk(yaffs_Device * de
+ 			yaffs_BlockBecameDirty(dev, block);
+ 		}
+ 
+-	} else {
+-		/* T(("Bad news deleting chunk %d\n",chunkId)); */
+ 	}
+ 
+ }
+ 
+-static int yaffs_WriteChunkDataToObject(yaffs_Object * in, int chunkInInode,
+-					const __u8 * buffer, int nBytes,
++static int yaffs_WriteChunkDataToObject(yaffs_Object *in, int chunkInInode,
++					const __u8 *buffer, int nBytes,
+ 					int useReserve)
+ {
+ 	/* Find old chunk Need to do this to get serial number
+@@ -3561,6 +3627,12 @@ static int yaffs_WriteChunkDataToObject(
+ 	    (prevChunkId >= 0) ? prevTags.serialNumber + 1 : 1;
+ 	newTags.byteCount = nBytes;
+ 
++	if (nBytes < 1 || nBytes > dev->totalBytesPerChunk) {
++		T(YAFFS_TRACE_ERROR,
++		(TSTR("Writing %d bytes to chunk!!!!!!!!!" TENDSTR), nBytes));
++		YBUG();
++	}
++
+ 	newChunkId =
+ 	    yaffs_WriteNewChunkWithTagsToNAND(dev, buffer, &newTags,
+ 					      useReserve);
+@@ -3568,11 +3640,9 @@ static int yaffs_WriteChunkDataToObject(
+ 	if (newChunkId >= 0) {
+ 		yaffs_PutChunkIntoFile(in, chunkInInode, newChunkId, 0);
+ 
+-		if (prevChunkId >= 0) {
++		if (prevChunkId >= 0)
+ 			yaffs_DeleteChunk(dev, prevChunkId, 1, __LINE__);
+ 
+-		}
+-
+ 		yaffs_CheckFileSanity(in);
+ 	}
+ 	return newChunkId;
+@@ -3582,7 +3652,7 @@ static int yaffs_WriteChunkDataToObject(
+ /* UpdateObjectHeader updates the header on NAND for an object.
+  * If name is not NULL, then that new name is used.
+  */
+-int yaffs_UpdateObjectHeader(yaffs_Object * in, const YCHAR * name, int force,
++int yaffs_UpdateObjectHeader(yaffs_Object *in, const YCHAR *name, int force,
+ 			     int isShrink, int shadows)
+ {
+ 
+@@ -3603,9 +3673,12 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 
+ 	yaffs_ObjectHeader *oh = NULL;
+ 
+-	yaffs_strcpy(oldName,"silly old name");
++	yaffs_strcpy(oldName, _Y("silly old name"));
+ 
+-	if (!in->fake || force) {
++
++	if (!in->fake ||
++		in == dev->rootDir || /* The rootDir should also be saved */
++		force) {
+ 
+ 		yaffs_CheckGarbageCollection(dev);
+ 		yaffs_CheckObjectDetailsLoaded(in);
+@@ -3613,13 +3686,13 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 		buffer = yaffs_GetTempBuffer(in->myDev, __LINE__);
+ 		oh = (yaffs_ObjectHeader *) buffer;
+ 
+-		prevChunkId = in->chunkId;
++		prevChunkId = in->hdrChunk;
+ 
+-		if (prevChunkId >= 0) {
++		if (prevChunkId > 0) {
+ 			result = yaffs_ReadChunkWithTagsFromNAND(dev, prevChunkId,
+ 							buffer, &oldTags);
+ 
+-			yaffs_VerifyObjectHeader(in,oh,&oldTags,0);
++			yaffs_VerifyObjectHeader(in, oh, &oldTags, 0);
+ 
+ 			memcpy(oldName, oh->name, sizeof(oh->name));
+ 		}
+@@ -3628,7 +3701,7 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 
+ 		oh->type = in->variantType;
+ 		oh->yst_mode = in->yst_mode;
+-		oh->shadowsObject = shadows;
++		oh->shadowsObject = oh->inbandShadowsObject = shadows;
+ 
+ #ifdef CONFIG_YAFFS_WINCE
+ 		oh->win_atime[0] = in->win_atime[0];
+@@ -3645,20 +3718,18 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 		oh->yst_ctime = in->yst_ctime;
+ 		oh->yst_rdev = in->yst_rdev;
+ #endif
+-		if (in->parent) {
++		if (in->parent)
+ 			oh->parentObjectId = in->parent->objectId;
+-		} else {
++		else
+ 			oh->parentObjectId = 0;
+-		}
+ 
+ 		if (name && *name) {
+ 			memset(oh->name, 0, sizeof(oh->name));
+ 			yaffs_strncpy(oh->name, name, YAFFS_MAX_NAME_LENGTH);
+-		} else if (prevChunkId>=0) {
++		} else if (prevChunkId >= 0)
+ 			memcpy(oh->name, oldName, sizeof(oh->name));
+-		} else {
++		else
+ 			memset(oh->name, 0, sizeof(oh->name));
+-		}
+ 
+ 		oh->isShrink = isShrink;
+ 
+@@ -3708,7 +3779,7 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 		newTags.extraShadows = (oh->shadowsObject > 0) ? 1 : 0;
+ 		newTags.extraObjectType = in->variantType;
+ 
+-		yaffs_VerifyObjectHeader(in,oh,&newTags,1);
++		yaffs_VerifyObjectHeader(in, oh, &newTags, 1);
+ 
+ 		/* Create new chunk in NAND */
+ 		newChunkId =
+@@ -3717,20 +3788,20 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 
+ 		if (newChunkId >= 0) {
+ 
+-			in->chunkId = newChunkId;
++			in->hdrChunk = newChunkId;
+ 
+ 			if (prevChunkId >= 0) {
+ 				yaffs_DeleteChunk(dev, prevChunkId, 1,
+ 						  __LINE__);
+ 			}
+ 
+-			if(!yaffs_ObjectHasCachedWriteData(in))
++			if (!yaffs_ObjectHasCachedWriteData(in))
+ 				in->dirty = 0;
+ 
+ 			/* If this was a shrink, then mark the block that the chunk lives on */
+ 			if (isShrink) {
+ 				bi = yaffs_GetBlockInfo(in->myDev,
+-							newChunkId /in->myDev->	nChunksPerBlock);
++					newChunkId / in->myDev->nChunksPerBlock);
+ 				bi->hasShrinkHeader = 1;
+ 			}
+ 
+@@ -3766,7 +3837,7 @@ static int yaffs_ObjectHasCachedWriteDat
+ 	yaffs_ChunkCache *cache;
+ 	int nCaches = obj->myDev->nShortOpCaches;
+ 
+-	for(i = 0; i < nCaches; i++){
++	for (i = 0; i < nCaches; i++) {
+ 		cache = &dev->srCache[i];
+ 		if (cache->object == obj &&
+ 		    cache->dirty)
+@@ -3777,7 +3848,7 @@ static int yaffs_ObjectHasCachedWriteDat
+ }
+ 
+ 
+-static void yaffs_FlushFilesChunkCache(yaffs_Object * obj)
++static void yaffs_FlushFilesChunkCache(yaffs_Object *obj)
+ {
+ 	yaffs_Device *dev = obj->myDev;
+ 	int lowest = -99;	/* Stop compiler whining. */
+@@ -3844,16 +3915,16 @@ void yaffs_FlushEntireDeviceCache(yaffs_
+ 	 */
+ 	do {
+ 		obj = NULL;
+-		for( i = 0; i < nCaches && !obj; i++) {
++		for (i = 0; i < nCaches && !obj; i++) {
+ 			if (dev->srCache[i].object &&
+ 			    dev->srCache[i].dirty)
+ 				obj = dev->srCache[i].object;
+ 
+ 		}
+-		if(obj)
++		if (obj)
+ 			yaffs_FlushFilesChunkCache(obj);
+ 
+-	} while(obj);
++	} while (obj);
+ 
+ }
+ 
+@@ -3863,41 +3934,21 @@ void yaffs_FlushEntireDeviceCache(yaffs_
+  * Then look for the least recently used non-dirty one.
+  * Then look for the least recently used dirty one...., flush and look again.
+  */
+-static yaffs_ChunkCache *yaffs_GrabChunkCacheWorker(yaffs_Device * dev)
++static yaffs_ChunkCache *yaffs_GrabChunkCacheWorker(yaffs_Device *dev)
+ {
+ 	int i;
+-	int usage;
+-	int theOne;
+ 
+ 	if (dev->nShortOpCaches > 0) {
+ 		for (i = 0; i < dev->nShortOpCaches; i++) {
+ 			if (!dev->srCache[i].object)
+ 				return &dev->srCache[i];
+ 		}
++	}
+ 
+-		return NULL;
++	return NULL;
++}
+ 
+-		theOne = -1;
+-		usage = 0;	/* just to stop the compiler grizzling */
+-
+-		for (i = 0; i < dev->nShortOpCaches; i++) {
+-			if (!dev->srCache[i].dirty &&
+-			    ((dev->srCache[i].lastUse < usage && theOne >= 0) ||
+-			     theOne < 0)) {
+-				usage = dev->srCache[i].lastUse;
+-				theOne = i;
+-			}
+-		}
+-
+-
+-		return theOne >= 0 ? &dev->srCache[theOne] : NULL;
+-	} else {
+-		return NULL;
+-	}
+-
+-}
+-
+-static yaffs_ChunkCache *yaffs_GrabChunkCache(yaffs_Device * dev)
++static yaffs_ChunkCache *yaffs_GrabChunkCache(yaffs_Device *dev)
+ {
+ 	yaffs_ChunkCache *cache;
+ 	yaffs_Object *theObj;
+@@ -3927,8 +3978,7 @@ static yaffs_ChunkCache *yaffs_GrabChunk
+ 			for (i = 0; i < dev->nShortOpCaches; i++) {
+ 				if (dev->srCache[i].object &&
+ 				    !dev->srCache[i].locked &&
+-				    (dev->srCache[i].lastUse < usage || !cache))
+-				{
++				    (dev->srCache[i].lastUse < usage || !cache)) {
+ 					usage = dev->srCache[i].lastUse;
+ 					theObj = dev->srCache[i].object;
+ 					cache = &dev->srCache[i];
+@@ -3950,7 +4000,7 @@ static yaffs_ChunkCache *yaffs_GrabChunk
+ }
+ 
+ /* Find a cached chunk */
+-static yaffs_ChunkCache *yaffs_FindChunkCache(const yaffs_Object * obj,
++static yaffs_ChunkCache *yaffs_FindChunkCache(const yaffs_Object *obj,
+ 					      int chunkId)
+ {
+ 	yaffs_Device *dev = obj->myDev;
+@@ -3969,7 +4019,7 @@ static yaffs_ChunkCache *yaffs_FindChunk
+ }
+ 
+ /* Mark the chunk for the least recently used algorithym */
+-static void yaffs_UseChunkCache(yaffs_Device * dev, yaffs_ChunkCache * cache,
++static void yaffs_UseChunkCache(yaffs_Device *dev, yaffs_ChunkCache *cache,
+ 				int isAWrite)
+ {
+ 
+@@ -3977,9 +4027,9 @@ static void yaffs_UseChunkCache(yaffs_De
+ 		if (dev->srLastUse < 0 || dev->srLastUse > 100000000) {
+ 			/* Reset the cache usages */
+ 			int i;
+-			for (i = 1; i < dev->nShortOpCaches; i++) {
++			for (i = 1; i < dev->nShortOpCaches; i++)
+ 				dev->srCache[i].lastUse = 0;
+-			}
++
+ 			dev->srLastUse = 0;
+ 		}
+ 
+@@ -3987,9 +4037,8 @@ static void yaffs_UseChunkCache(yaffs_De
+ 
+ 		cache->lastUse = dev->srLastUse;
+ 
+-		if (isAWrite) {
++		if (isAWrite)
+ 			cache->dirty = 1;
+-		}
+ 	}
+ }
+ 
+@@ -3997,21 +4046,20 @@ static void yaffs_UseChunkCache(yaffs_De
+  * Do this when a whole page gets written,
+  * ie the short cache for this page is no longer valid.
+  */
+-static void yaffs_InvalidateChunkCache(yaffs_Object * object, int chunkId)
++static void yaffs_InvalidateChunkCache(yaffs_Object *object, int chunkId)
+ {
+ 	if (object->myDev->nShortOpCaches > 0) {
+ 		yaffs_ChunkCache *cache = yaffs_FindChunkCache(object, chunkId);
+ 
+-		if (cache) {
++		if (cache)
+ 			cache->object = NULL;
+-		}
+ 	}
+ }
+ 
+ /* Invalidate all the cache pages associated with this object
+  * Do this whenever ther file is deleted or resized.
+  */
+-static void yaffs_InvalidateWholeChunkCache(yaffs_Object * in)
++static void yaffs_InvalidateWholeChunkCache(yaffs_Object *in)
+ {
+ 	int i;
+ 	yaffs_Device *dev = in->myDev;
+@@ -4019,9 +4067,8 @@ static void yaffs_InvalidateWholeChunkCa
+ 	if (dev->nShortOpCaches > 0) {
+ 		/* Invalidate it. */
+ 		for (i = 0; i < dev->nShortOpCaches; i++) {
+-			if (dev->srCache[i].object == in) {
++			if (dev->srCache[i].object == in)
+ 				dev->srCache[i].object = NULL;
+-			}
+ 		}
+ 	}
+ }
+@@ -4029,18 +4076,18 @@ static void yaffs_InvalidateWholeChunkCa
+ /*--------------------- Checkpointing --------------------*/
+ 
+ 
+-static int yaffs_WriteCheckpointValidityMarker(yaffs_Device *dev,int head)
++static int yaffs_WriteCheckpointValidityMarker(yaffs_Device *dev, int head)
+ {
+ 	yaffs_CheckpointValidity cp;
+ 
+-	memset(&cp,0,sizeof(cp));
++	memset(&cp, 0, sizeof(cp));
+ 
+ 	cp.structType = sizeof(cp);
+ 	cp.magic = YAFFS_MAGIC;
+ 	cp.version = YAFFS_CHECKPOINT_VERSION;
+ 	cp.head = (head) ? 1 : 0;
+ 
+-	return (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp))?
++	return (yaffs_CheckpointWrite(dev, &cp, sizeof(cp)) == sizeof(cp)) ?
+ 		1 : 0;
+ }
+ 
+@@ -4049,9 +4096,9 @@ static int yaffs_ReadCheckpointValidityM
+ 	yaffs_CheckpointValidity cp;
+ 	int ok;
+ 
+-	ok = (yaffs_CheckpointRead(dev,&cp,sizeof(cp)) == sizeof(cp));
++	ok = (yaffs_CheckpointRead(dev, &cp, sizeof(cp)) == sizeof(cp));
+ 
+-	if(ok)
++	if (ok)
+ 		ok = (cp.structType == sizeof(cp)) &&
+ 		     (cp.magic == YAFFS_MAGIC) &&
+ 		     (cp.version == YAFFS_CHECKPOINT_VERSION) &&
+@@ -4100,21 +4147,21 @@ static int yaffs_WriteCheckpointDevice(y
+ 	int ok;
+ 
+ 	/* Write device runtime values*/
+-	yaffs_DeviceToCheckpointDevice(&cp,dev);
++	yaffs_DeviceToCheckpointDevice(&cp, dev);
+ 	cp.structType = sizeof(cp);
+ 
+-	ok = (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp));
++	ok = (yaffs_CheckpointWrite(dev, &cp, sizeof(cp)) == sizeof(cp));
+ 
+ 	/* Write block info */
+-	if(ok) {
++	if (ok) {
+ 		nBytes = nBlocks * sizeof(yaffs_BlockInfo);
+-		ok = (yaffs_CheckpointWrite(dev,dev->blockInfo,nBytes) == nBytes);
++		ok = (yaffs_CheckpointWrite(dev, dev->blockInfo, nBytes) == nBytes);
+ 	}
+ 
+ 	/* Write chunk bits */
+-	if(ok) {
++	if (ok) {
+ 		nBytes = nBlocks * dev->chunkBitmapStride;
+-		ok = (yaffs_CheckpointWrite(dev,dev->chunkBits,nBytes) == nBytes);
++		ok = (yaffs_CheckpointWrite(dev, dev->chunkBits, nBytes) == nBytes);
+ 	}
+ 	return	 ok ? 1 : 0;
+ 
+@@ -4128,25 +4175,25 @@ static int yaffs_ReadCheckpointDevice(ya
+ 
+ 	int ok;
+ 
+-	ok = (yaffs_CheckpointRead(dev,&cp,sizeof(cp)) == sizeof(cp));
+-	if(!ok)
++	ok = (yaffs_CheckpointRead(dev, &cp, sizeof(cp)) == sizeof(cp));
++	if (!ok)
+ 		return 0;
+ 
+-	if(cp.structType != sizeof(cp))
++	if (cp.structType != sizeof(cp))
+ 		return 0;
+ 
+ 
+-	yaffs_CheckpointDeviceToDevice(dev,&cp);
++	yaffs_CheckpointDeviceToDevice(dev, &cp);
+ 
+ 	nBytes = nBlocks * sizeof(yaffs_BlockInfo);
+ 
+-	ok = (yaffs_CheckpointRead(dev,dev->blockInfo,nBytes) == nBytes);
++	ok = (yaffs_CheckpointRead(dev, dev->blockInfo, nBytes) == nBytes);
+ 
+-	if(!ok)
++	if (!ok)
+ 		return 0;
+ 	nBytes = nBlocks * dev->chunkBitmapStride;
+ 
+-	ok = (yaffs_CheckpointRead(dev,dev->chunkBits,nBytes) == nBytes);
++	ok = (yaffs_CheckpointRead(dev, dev->chunkBits, nBytes) == nBytes);
+ 
+ 	return ok ? 1 : 0;
+ }
+@@ -4157,7 +4204,7 @@ static void yaffs_ObjectToCheckpointObje
+ 
+ 	cp->objectId = obj->objectId;
+ 	cp->parentId = (obj->parent) ? obj->parent->objectId : 0;
+-	cp->chunkId = obj->chunkId;
++	cp->hdrChunk = obj->hdrChunk;
+ 	cp->variantType = obj->variantType;
+ 	cp->deleted = obj->deleted;
+ 	cp->softDeleted = obj->softDeleted;
+@@ -4168,20 +4215,28 @@ static void yaffs_ObjectToCheckpointObje
+ 	cp->serial = obj->serial;
+ 	cp->nDataChunks = obj->nDataChunks;
+ 
+-	if(obj->variantType == YAFFS_OBJECT_TYPE_FILE)
++	if (obj->variantType == YAFFS_OBJECT_TYPE_FILE)
+ 		cp->fileSizeOrEquivalentObjectId = obj->variant.fileVariant.fileSize;
+-	else if(obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK)
++	else if (obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK)
+ 		cp->fileSizeOrEquivalentObjectId = obj->variant.hardLinkVariant.equivalentObjectId;
+ }
+ 
+-static void yaffs_CheckpointObjectToObject( yaffs_Object *obj,yaffs_CheckpointObject *cp)
++static int yaffs_CheckpointObjectToObject(yaffs_Object *obj, yaffs_CheckpointObject *cp)
+ {
+ 
+ 	yaffs_Object *parent;
+ 
++	if (obj->variantType != cp->variantType) {
++		T(YAFFS_TRACE_ERROR, (TSTR("Checkpoint read object %d type %d "
++			TCONT("chunk %d does not match existing object type %d")
++			TENDSTR), cp->objectId, cp->variantType, cp->hdrChunk,
++			obj->variantType));
++		return 0;
++	}
++
+ 	obj->objectId = cp->objectId;
+ 
+-	if(cp->parentId)
++	if (cp->parentId)
+ 		parent = yaffs_FindOrCreateObjectByNumber(
+ 					obj->myDev,
+ 					cp->parentId,
+@@ -4189,10 +4244,19 @@ static void yaffs_CheckpointObjectToObje
+ 	else
+ 		parent = NULL;
+ 
+-	if(parent)
++	if (parent) {
++		if (parent->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
++			T(YAFFS_TRACE_ALWAYS, (TSTR("Checkpoint read object %d parent %d type %d"
++				TCONT(" chunk %d Parent type, %d, not directory")
++				TENDSTR),
++				cp->objectId, cp->parentId, cp->variantType,
++				cp->hdrChunk, parent->variantType));
++			return 0;
++		}
+ 		yaffs_AddObjectToDirectory(parent, obj);
++	}
+ 
+-	obj->chunkId = cp->chunkId;
++	obj->hdrChunk = cp->hdrChunk;
+ 	obj->variantType = cp->variantType;
+ 	obj->deleted = cp->deleted;
+ 	obj->softDeleted = cp->softDeleted;
+@@ -4203,29 +4267,34 @@ static void yaffs_CheckpointObjectToObje
+ 	obj->serial = cp->serial;
+ 	obj->nDataChunks = cp->nDataChunks;
+ 
+-	if(obj->variantType == YAFFS_OBJECT_TYPE_FILE)
++	if (obj->variantType == YAFFS_OBJECT_TYPE_FILE)
+ 		obj->variant.fileVariant.fileSize = cp->fileSizeOrEquivalentObjectId;
+-	else if(obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK)
++	else if (obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK)
+ 		obj->variant.hardLinkVariant.equivalentObjectId = cp->fileSizeOrEquivalentObjectId;
+ 
+-	if(obj->objectId >= YAFFS_NOBJECT_BUCKETS)
++	if (obj->hdrChunk > 0)
+ 		obj->lazyLoaded = 1;
++	return 1;
+ }
+ 
+ 
+ 
+-static int yaffs_CheckpointTnodeWorker(yaffs_Object * in, yaffs_Tnode * tn,
+-				  	__u32 level, int chunkOffset)
++static int yaffs_CheckpointTnodeWorker(yaffs_Object *in, yaffs_Tnode *tn,
++					__u32 level, int chunkOffset)
+ {
+ 	int i;
+ 	yaffs_Device *dev = in->myDev;
+ 	int ok = 1;
+-	int nTnodeBytes = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
++	int tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
++
++	if (tnodeSize < sizeof(yaffs_Tnode))
++		tnodeSize = sizeof(yaffs_Tnode);
++
+ 
+ 	if (tn) {
+ 		if (level > 0) {
+ 
+-			for (i = 0; i < YAFFS_NTNODES_INTERNAL && ok; i++){
++			for (i = 0; i < YAFFS_NTNODES_INTERNAL && ok; i++) {
+ 				if (tn->internal[i]) {
+ 					ok = yaffs_CheckpointTnodeWorker(in,
+ 							tn->internal[i],
+@@ -4235,10 +4304,9 @@ static int yaffs_CheckpointTnodeWorker(y
+ 			}
+ 		} else if (level == 0) {
+ 			__u32 baseOffset = chunkOffset <<  YAFFS_TNODES_LEVEL0_BITS;
+-			/* printf("write tnode at %d\n",baseOffset); */
+-			ok = (yaffs_CheckpointWrite(dev,&baseOffset,sizeof(baseOffset)) == sizeof(baseOffset));
+-			if(ok)
+-				ok = (yaffs_CheckpointWrite(dev,tn,nTnodeBytes) == nTnodeBytes);
++			ok = (yaffs_CheckpointWrite(dev, &baseOffset, sizeof(baseOffset)) == sizeof(baseOffset));
++			if (ok)
++				ok = (yaffs_CheckpointWrite(dev, tn, tnodeSize) == tnodeSize);
+ 		}
+ 	}
+ 
+@@ -4251,13 +4319,13 @@ static int yaffs_WriteCheckpointTnodes(y
+ 	__u32 endMarker = ~0;
+ 	int ok = 1;
+ 
+-	if(obj->variantType == YAFFS_OBJECT_TYPE_FILE){
++	if (obj->variantType == YAFFS_OBJECT_TYPE_FILE) {
+ 		ok = yaffs_CheckpointTnodeWorker(obj,
+ 					    obj->variant.fileVariant.top,
+ 					    obj->variant.fileVariant.topLevel,
+ 					    0);
+-		if(ok)
+-			ok = (yaffs_CheckpointWrite(obj->myDev,&endMarker,sizeof(endMarker)) ==
++		if (ok)
++			ok = (yaffs_CheckpointWrite(obj->myDev, &endMarker, sizeof(endMarker)) ==
+ 				sizeof(endMarker));
+ 	}
+ 
+@@ -4272,38 +4340,38 @@ static int yaffs_ReadCheckpointTnodes(ya
+ 	yaffs_FileStructure *fileStructPtr = &obj->variant.fileVariant;
+ 	yaffs_Tnode *tn;
+ 	int nread = 0;
++	int tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
+ 
+-	ok = (yaffs_CheckpointRead(dev,&baseChunk,sizeof(baseChunk)) == sizeof(baseChunk));
++	if (tnodeSize < sizeof(yaffs_Tnode))
++		tnodeSize = sizeof(yaffs_Tnode);
+ 
+-	while(ok && (~baseChunk)){
++	ok = (yaffs_CheckpointRead(dev, &baseChunk, sizeof(baseChunk)) == sizeof(baseChunk));
++
++	while (ok && (~baseChunk)) {
+ 		nread++;
+ 		/* Read level 0 tnode */
+ 
+ 
+-		/* printf("read  tnode at %d\n",baseChunk); */
+ 		tn = yaffs_GetTnodeRaw(dev);
+-		if(tn)
+-			ok = (yaffs_CheckpointRead(dev,tn,(dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8) ==
+-			      (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8);
++		if (tn)
++			ok = (yaffs_CheckpointRead(dev, tn, tnodeSize) == tnodeSize);
+ 		else
+ 			ok = 0;
+ 
+-		if(tn && ok){
++		if (tn && ok)
+ 			ok = yaffs_AddOrFindLevel0Tnode(dev,
+-					       		fileStructPtr,
+-					       		baseChunk,
+-					       		tn) ? 1 : 0;
++							fileStructPtr,
++							baseChunk,
++							tn) ? 1 : 0;
+ 
+-		}
+-
+-		if(ok)
+-			ok = (yaffs_CheckpointRead(dev,&baseChunk,sizeof(baseChunk)) == sizeof(baseChunk));
++		if (ok)
++			ok = (yaffs_CheckpointRead(dev, &baseChunk, sizeof(baseChunk)) == sizeof(baseChunk));
+ 
+ 	}
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(
++	T(YAFFS_TRACE_CHECKPOINT, (
+ 		TSTR("Checkpoint read tnodes %d records, last %d. ok %d" TENDSTR),
+-		nread,baseChunk,ok));
++		nread, baseChunk, ok));
+ 
+ 	return ok ? 1 : 0;
+ }
+@@ -4315,41 +4383,40 @@ static int yaffs_WriteCheckpointObjects(
+ 	yaffs_CheckpointObject cp;
+ 	int i;
+ 	int ok = 1;
+-	struct list_head *lh;
++	struct ylist_head *lh;
+ 
+ 
+ 	/* Iterate through the objects in each hash entry,
+ 	 * dumping them to the checkpointing stream.
+ 	 */
+ 
+-	 for(i = 0; ok &&  i <  YAFFS_NOBJECT_BUCKETS; i++){
+-	 	list_for_each(lh, &dev->objectBucket[i].list) {
++	for (i = 0; ok &&  i <  YAFFS_NOBJECT_BUCKETS; i++) {
++		ylist_for_each(lh, &dev->objectBucket[i].list) {
+ 			if (lh) {
+-				obj = list_entry(lh, yaffs_Object, hashLink);
++				obj = ylist_entry(lh, yaffs_Object, hashLink);
+ 				if (!obj->deferedFree) {
+-					yaffs_ObjectToCheckpointObject(&cp,obj);
++					yaffs_ObjectToCheckpointObject(&cp, obj);
+ 					cp.structType = sizeof(cp);
+ 
+-					T(YAFFS_TRACE_CHECKPOINT,(
++					T(YAFFS_TRACE_CHECKPOINT, (
+ 						TSTR("Checkpoint write object %d parent %d type %d chunk %d obj addr %x" TENDSTR),
+-						cp.objectId,cp.parentId,cp.variantType,cp.chunkId,(unsigned) obj));
++						cp.objectId, cp.parentId, cp.variantType, cp.hdrChunk, (unsigned) obj));
+ 
+-					ok = (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp));
++					ok = (yaffs_CheckpointWrite(dev, &cp, sizeof(cp)) == sizeof(cp));
+ 
+-					if(ok && obj->variantType == YAFFS_OBJECT_TYPE_FILE){
++					if (ok && obj->variantType == YAFFS_OBJECT_TYPE_FILE)
+ 						ok = yaffs_WriteCheckpointTnodes(obj);
+-					}
+ 				}
+ 			}
+ 		}
+-	 }
++	}
+ 
+-	 /* Dump end of list */
+-	memset(&cp,0xFF,sizeof(yaffs_CheckpointObject));
++	/* Dump end of list */
++	memset(&cp, 0xFF, sizeof(yaffs_CheckpointObject));
+ 	cp.structType = sizeof(cp);
+ 
+-	if(ok)
+-		ok = (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp));
++	if (ok)
++		ok = (yaffs_CheckpointWrite(dev, &cp, sizeof(cp)) == sizeof(cp));
+ 
+ 	return ok ? 1 : 0;
+ }
+@@ -4362,38 +4429,39 @@ static int yaffs_ReadCheckpointObjects(y
+ 	int done = 0;
+ 	yaffs_Object *hardList = NULL;
+ 
+-	while(ok && !done) {
+-		ok = (yaffs_CheckpointRead(dev,&cp,sizeof(cp)) == sizeof(cp));
+-		if(cp.structType != sizeof(cp)) {
+-			T(YAFFS_TRACE_CHECKPOINT,(TSTR("struct size %d instead of %d ok %d"TENDSTR),
+-				cp.structType,sizeof(cp),ok));
++	while (ok && !done) {
++		ok = (yaffs_CheckpointRead(dev, &cp, sizeof(cp)) == sizeof(cp));
++		if (cp.structType != sizeof(cp)) {
++			T(YAFFS_TRACE_CHECKPOINT, (TSTR("struct size %d instead of %d ok %d"TENDSTR),
++				cp.structType, sizeof(cp), ok));
+ 			ok = 0;
+ 		}
+ 
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("Checkpoint read object %d parent %d type %d chunk %d " TENDSTR),
+-			cp.objectId,cp.parentId,cp.variantType,cp.chunkId));
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("Checkpoint read object %d parent %d type %d chunk %d " TENDSTR),
++			cp.objectId, cp.parentId, cp.variantType, cp.hdrChunk));
+ 
+-		if(ok && cp.objectId == ~0)
++		if (ok && cp.objectId == ~0)
+ 			done = 1;
+-		else if(ok){
+-			obj = yaffs_FindOrCreateObjectByNumber(dev,cp.objectId, cp.variantType);
+-			if(obj) {
+-				yaffs_CheckpointObjectToObject(obj,&cp);
+-				if(obj->variantType == YAFFS_OBJECT_TYPE_FILE) {
++		else if (ok) {
++			obj = yaffs_FindOrCreateObjectByNumber(dev, cp.objectId, cp.variantType);
++			if (obj) {
++				ok = yaffs_CheckpointObjectToObject(obj, &cp);
++				if (!ok)
++					break;
++				if (obj->variantType == YAFFS_OBJECT_TYPE_FILE) {
+ 					ok = yaffs_ReadCheckpointTnodes(obj);
+-				} else if(obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) {
++				} else if (obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) {
+ 					obj->hardLinks.next =
+-						    (struct list_head *)
+-						    hardList;
++						(struct ylist_head *) hardList;
+ 					hardList = obj;
+ 				}
+-
+-			}
++			} else
++				ok = 0;
+ 		}
+ 	}
+ 
+-	if(ok)
+-		yaffs_HardlinkFixup(dev,hardList);
++	if (ok)
++		yaffs_HardlinkFixup(dev, hardList);
+ 
+ 	return ok ? 1 : 0;
+ }
+@@ -4403,11 +4471,11 @@ static int yaffs_WriteCheckpointSum(yaff
+ 	__u32 checkpointSum;
+ 	int ok;
+ 
+-	yaffs_GetCheckpointSum(dev,&checkpointSum);
++	yaffs_GetCheckpointSum(dev, &checkpointSum);
+ 
+-	ok = (yaffs_CheckpointWrite(dev,&checkpointSum,sizeof(checkpointSum)) == sizeof(checkpointSum));
++	ok = (yaffs_CheckpointWrite(dev, &checkpointSum, sizeof(checkpointSum)) == sizeof(checkpointSum));
+ 
+-	if(!ok)
++	if (!ok)
+ 		return 0;
+ 
+ 	return 1;
+@@ -4419,14 +4487,14 @@ static int yaffs_ReadCheckpointSum(yaffs
+ 	__u32 checkpointSum1;
+ 	int ok;
+ 
+-	yaffs_GetCheckpointSum(dev,&checkpointSum0);
++	yaffs_GetCheckpointSum(dev, &checkpointSum0);
+ 
+-	ok = (yaffs_CheckpointRead(dev,&checkpointSum1,sizeof(checkpointSum1)) == sizeof(checkpointSum1));
++	ok = (yaffs_CheckpointRead(dev, &checkpointSum1, sizeof(checkpointSum1)) == sizeof(checkpointSum1));
+ 
+-	if(!ok)
++	if (!ok)
+ 		return 0;
+ 
+-	if(checkpointSum0 != checkpointSum1)
++	if (checkpointSum0 != checkpointSum1)
+ 		return 0;
+ 
+ 	return 1;
+@@ -4435,46 +4503,43 @@ static int yaffs_ReadCheckpointSum(yaffs
+ 
+ static int yaffs_WriteCheckpointData(yaffs_Device *dev)
+ {
+-
+ 	int ok = 1;
+ 
+-	if(dev->skipCheckpointWrite || !dev->isYaffs2){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("skipping checkpoint write" TENDSTR)));
++	if (dev->skipCheckpointWrite || !dev->isYaffs2) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("skipping checkpoint write" TENDSTR)));
+ 		ok = 0;
+ 	}
+ 
+-	if(ok)
+-		ok = yaffs_CheckpointOpen(dev,1);
++	if (ok)
++		ok = yaffs_CheckpointOpen(dev, 1);
+ 
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint validity" TENDSTR)));
+-		ok = yaffs_WriteCheckpointValidityMarker(dev,1);
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("write checkpoint validity" TENDSTR)));
++		ok = yaffs_WriteCheckpointValidityMarker(dev, 1);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint device" TENDSTR)));
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("write checkpoint device" TENDSTR)));
+ 		ok = yaffs_WriteCheckpointDevice(dev);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint objects" TENDSTR)));
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("write checkpoint objects" TENDSTR)));
+ 		ok = yaffs_WriteCheckpointObjects(dev);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint validity" TENDSTR)));
+-		ok = yaffs_WriteCheckpointValidityMarker(dev,0);
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("write checkpoint validity" TENDSTR)));
++		ok = yaffs_WriteCheckpointValidityMarker(dev, 0);
+ 	}
+ 
+-	if(ok){
++	if (ok)
+ 		ok = yaffs_WriteCheckpointSum(dev);
+-	}
+-
+ 
+-	if(!yaffs_CheckpointClose(dev))
+-		 ok = 0;
++	if (!yaffs_CheckpointClose(dev))
++		ok = 0;
+ 
+-	if(ok)
+-	    	dev->isCheckpointed = 1;
+-	 else
+-	 	dev->isCheckpointed = 0;
++	if (ok)
++		dev->isCheckpointed = 1;
++	else
++		dev->isCheckpointed = 0;
+ 
+ 	return dev->isCheckpointed;
+ }
+@@ -4483,43 +4548,43 @@ static int yaffs_ReadCheckpointData(yaff
+ {
+ 	int ok = 1;
+ 
+-	if(dev->skipCheckpointRead || !dev->isYaffs2){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("skipping checkpoint read" TENDSTR)));
++	if (dev->skipCheckpointRead || !dev->isYaffs2) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("skipping checkpoint read" TENDSTR)));
+ 		ok = 0;
+ 	}
+ 
+-	if(ok)
+-		ok = yaffs_CheckpointOpen(dev,0); /* open for read */
++	if (ok)
++		ok = yaffs_CheckpointOpen(dev, 0); /* open for read */
+ 
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint validity" TENDSTR)));
+-		ok = yaffs_ReadCheckpointValidityMarker(dev,1);
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("read checkpoint validity" TENDSTR)));
++		ok = yaffs_ReadCheckpointValidityMarker(dev, 1);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint device" TENDSTR)));
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("read checkpoint device" TENDSTR)));
+ 		ok = yaffs_ReadCheckpointDevice(dev);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint objects" TENDSTR)));
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("read checkpoint objects" TENDSTR)));
+ 		ok = yaffs_ReadCheckpointObjects(dev);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint validity" TENDSTR)));
+-		ok = yaffs_ReadCheckpointValidityMarker(dev,0);
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("read checkpoint validity" TENDSTR)));
++		ok = yaffs_ReadCheckpointValidityMarker(dev, 0);
+ 	}
+ 
+-	if(ok){
++	if (ok) {
+ 		ok = yaffs_ReadCheckpointSum(dev);
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint checksum %d" TENDSTR),ok));
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("read checkpoint checksum %d" TENDSTR), ok));
+ 	}
+ 
+-	if(!yaffs_CheckpointClose(dev))
++	if (!yaffs_CheckpointClose(dev))
+ 		ok = 0;
+ 
+-	if(ok)
+-	    	dev->isCheckpointed = 1;
+-	 else
+-	 	dev->isCheckpointed = 0;
++	if (ok)
++		dev->isCheckpointed = 1;
++	else
++		dev->isCheckpointed = 0;
+ 
+ 	return ok ? 1 : 0;
+ 
+@@ -4527,11 +4592,11 @@ static int yaffs_ReadCheckpointData(yaff
+ 
+ static void yaffs_InvalidateCheckpoint(yaffs_Device *dev)
+ {
+-	if(dev->isCheckpointed ||
+-	   dev->blocksInCheckpoint > 0){
++	if (dev->isCheckpointed ||
++			dev->blocksInCheckpoint > 0) {
+ 		dev->isCheckpointed = 0;
+ 		yaffs_CheckpointInvalidateStream(dev);
+-		if(dev->superBlock && dev->markSuperBlockDirty)
++		if (dev->superBlock && dev->markSuperBlockDirty)
+ 			dev->markSuperBlockDirty(dev->superBlock);
+ 	}
+ }
+@@ -4540,18 +4605,18 @@ static void yaffs_InvalidateCheckpoint(y
+ int yaffs_CheckpointSave(yaffs_Device *dev)
+ {
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("save entry: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("save entry: isCheckpointed %d"TENDSTR), dev->isCheckpointed));
+ 
+ 	yaffs_VerifyObjects(dev);
+ 	yaffs_VerifyBlocks(dev);
+ 	yaffs_VerifyFreeChunks(dev);
+ 
+-	if(!dev->isCheckpointed) {
++	if (!dev->isCheckpointed) {
+ 		yaffs_InvalidateCheckpoint(dev);
+ 		yaffs_WriteCheckpointData(dev);
+ 	}
+ 
+-	T(YAFFS_TRACE_ALWAYS,(TSTR("save exit: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
++	T(YAFFS_TRACE_ALWAYS, (TSTR("save exit: isCheckpointed %d"TENDSTR), dev->isCheckpointed));
+ 
+ 	return dev->isCheckpointed;
+ }
+@@ -4559,17 +4624,17 @@ int yaffs_CheckpointSave(yaffs_Device *d
+ int yaffs_CheckpointRestore(yaffs_Device *dev)
+ {
+ 	int retval;
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("restore entry: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("restore entry: isCheckpointed %d"TENDSTR), dev->isCheckpointed));
+ 
+ 	retval = yaffs_ReadCheckpointData(dev);
+ 
+-	if(dev->isCheckpointed){
++	if (dev->isCheckpointed) {
+ 		yaffs_VerifyObjects(dev);
+ 		yaffs_VerifyBlocks(dev);
+ 		yaffs_VerifyFreeChunks(dev);
+ 	}
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("restore exit: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("restore exit: isCheckpointed %d"TENDSTR), dev->isCheckpointed));
+ 
+ 	return retval;
+ }
+@@ -4584,12 +4649,12 @@ int yaffs_CheckpointRestore(yaffs_Device
+  * Curve-balls: the first chunk might also be the last chunk.
+  */
+ 
+-int yaffs_ReadDataFromFile(yaffs_Object * in, __u8 * buffer, loff_t offset,
+-			   int nBytes)
++int yaffs_ReadDataFromFile(yaffs_Object *in, __u8 *buffer, loff_t offset,
++			int nBytes)
+ {
+ 
+ 	int chunk;
+-	int start;
++	__u32 start;
+ 	int nToCopy;
+ 	int n = nBytes;
+ 	int nDone = 0;
+@@ -4600,27 +4665,26 @@ int yaffs_ReadDataFromFile(yaffs_Object
+ 	dev = in->myDev;
+ 
+ 	while (n > 0) {
+-		//chunk = offset / dev->nDataBytesPerChunk + 1;
+-		//start = offset % dev->nDataBytesPerChunk;
+-		yaffs_AddrToChunk(dev,offset,&chunk,&start);
++		/* chunk = offset / dev->nDataBytesPerChunk + 1; */
++		/* start = offset % dev->nDataBytesPerChunk; */
++		yaffs_AddrToChunk(dev, offset, &chunk, &start);
+ 		chunk++;
+ 
+ 		/* OK now check for the curveball where the start and end are in
+ 		 * the same chunk.
+ 		 */
+-		if ((start + n) < dev->nDataBytesPerChunk) {
++		if ((start + n) < dev->nDataBytesPerChunk)
+ 			nToCopy = n;
+-		} else {
++		else
+ 			nToCopy = dev->nDataBytesPerChunk - start;
+-		}
+ 
+ 		cache = yaffs_FindChunkCache(in, chunk);
+ 
+ 		/* If the chunk is already in the cache or it is less than a whole chunk
+-		 * then use the cache (if there is caching)
++		 * or we're using inband tags then use the cache (if there is caching)
+ 		 * else bypass the cache.
+ 		 */
+-		if (cache || nToCopy != dev->nDataBytesPerChunk) {
++		if (cache || nToCopy != dev->nDataBytesPerChunk || dev->inbandTags) {
+ 			if (dev->nShortOpCaches > 0) {
+ 
+ 				/* If we can't find the data in the cache, then load it up. */
+@@ -4641,14 +4705,9 @@ int yaffs_ReadDataFromFile(yaffs_Object
+ 
+ 				cache->locked = 1;
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_UnlockYAFFS(TRUE);
+-#endif
++
+ 				memcpy(buffer, &cache->data[start], nToCopy);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_LockYAFFS(TRUE);
+-#endif
+ 				cache->locked = 0;
+ 			} else {
+ 				/* Read into the local buffer then copy..*/
+@@ -4657,41 +4716,19 @@ int yaffs_ReadDataFromFile(yaffs_Object
+ 				    yaffs_GetTempBuffer(dev, __LINE__);
+ 				yaffs_ReadChunkDataFromObject(in, chunk,
+ 							      localBuffer);
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_UnlockYAFFS(TRUE);
+-#endif
++
+ 				memcpy(buffer, &localBuffer[start], nToCopy);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_LockYAFFS(TRUE);
+-#endif
++
+ 				yaffs_ReleaseTempBuffer(dev, localBuffer,
+ 							__LINE__);
+ 			}
+ 
+ 		} else {
+-#ifdef CONFIG_YAFFS_WINCE
+-			__u8 *localBuffer = yaffs_GetTempBuffer(dev, __LINE__);
+-
+-			/* Under WinCE can't do direct transfer. Need to use a local buffer.
+-			 * This is because we otherwise screw up WinCE's memory mapper
+-			 */
+-			yaffs_ReadChunkDataFromObject(in, chunk, localBuffer);
+-
+-#ifdef CONFIG_YAFFS_WINCE
+-			yfsd_UnlockYAFFS(TRUE);
+-#endif
+-			memcpy(buffer, localBuffer, dev->nDataBytesPerChunk);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-			yfsd_LockYAFFS(TRUE);
+-			yaffs_ReleaseTempBuffer(dev, localBuffer, __LINE__);
+-#endif
+-
+-#else
+ 			/* A full chunk. Read directly into the supplied buffer. */
+ 			yaffs_ReadChunkDataFromObject(in, chunk, buffer);
+-#endif
++
+ 		}
+ 
+ 		n -= nToCopy;
+@@ -4704,28 +4741,37 @@ int yaffs_ReadDataFromFile(yaffs_Object
+ 	return nDone;
+ }
+ 
+-int yaffs_WriteDataToFile(yaffs_Object * in, const __u8 * buffer, loff_t offset,
+-			  int nBytes, int writeThrough)
++int yaffs_WriteDataToFile(yaffs_Object *in, const __u8 *buffer, loff_t offset,
++			int nBytes, int writeThrough)
+ {
+ 
+ 	int chunk;
+-	int start;
++	__u32 start;
+ 	int nToCopy;
+ 	int n = nBytes;
+ 	int nDone = 0;
+ 	int nToWriteBack;
+ 	int startOfWrite = offset;
+ 	int chunkWritten = 0;
+-	int nBytesRead;
++	__u32 nBytesRead;
++	__u32 chunkStart;
+ 
+ 	yaffs_Device *dev;
+ 
+ 	dev = in->myDev;
+ 
+ 	while (n > 0 && chunkWritten >= 0) {
+-		//chunk = offset / dev->nDataBytesPerChunk + 1;
+-		//start = offset % dev->nDataBytesPerChunk;
+-		yaffs_AddrToChunk(dev,offset,&chunk,&start);
++		/* chunk = offset / dev->nDataBytesPerChunk + 1; */
++		/* start = offset % dev->nDataBytesPerChunk; */
++		yaffs_AddrToChunk(dev, offset, &chunk, &start);
++
++		if (chunk * dev->nDataBytesPerChunk + start != offset ||
++				start >= dev->nDataBytesPerChunk) {
++			T(YAFFS_TRACE_ERROR, (
++			   TSTR("AddrToChunk of offset %d gives chunk %d start %d"
++			   TENDSTR),
++			   (int)offset, chunk, start));
++		}
+ 		chunk++;
+ 
+ 		/* OK now check for the curveball where the start and end are in
+@@ -4740,25 +4786,32 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 			 * we need to write back as much as was there before.
+ 			 */
+ 
+-			nBytesRead =
+-			    in->variant.fileVariant.fileSize -
+-			    ((chunk - 1) * dev->nDataBytesPerChunk);
++			chunkStart = ((chunk - 1) * dev->nDataBytesPerChunk);
++
++			if (chunkStart > in->variant.fileVariant.fileSize)
++				nBytesRead = 0; /* Past end of file */
++			else
++				nBytesRead = in->variant.fileVariant.fileSize - chunkStart;
+ 
+-			if (nBytesRead > dev->nDataBytesPerChunk) {
++			if (nBytesRead > dev->nDataBytesPerChunk)
+ 				nBytesRead = dev->nDataBytesPerChunk;
+-			}
+ 
+ 			nToWriteBack =
+ 			    (nBytesRead >
+ 			     (start + n)) ? nBytesRead : (start + n);
+ 
++			if (nToWriteBack < 0 || nToWriteBack > dev->nDataBytesPerChunk)
++				YBUG();
++
+ 		} else {
+ 			nToCopy = dev->nDataBytesPerChunk - start;
+ 			nToWriteBack = dev->nDataBytesPerChunk;
+ 		}
+ 
+-		if (nToCopy != dev->nDataBytesPerChunk) {
+-			/* An incomplete start or end chunk (or maybe both start and end chunk) */
++		if (nToCopy != dev->nDataBytesPerChunk || dev->inbandTags) {
++			/* An incomplete start or end chunk (or maybe both start and end chunk),
++			 * or we're using inband tags, so we want to use the cache buffers.
++			 */
+ 			if (dev->nShortOpCaches > 0) {
+ 				yaffs_ChunkCache *cache;
+ 				/* If we can't find the data in the cache, then load the cache */
+@@ -4775,10 +4828,9 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 					yaffs_ReadChunkDataFromObject(in, chunk,
+ 								      cache->
+ 								      data);
+-				}
+-				else if(cache &&
+-				        !cache->dirty &&
+-					!yaffs_CheckSpaceForAllocation(in->myDev)){
++				} else if (cache &&
++					!cache->dirty &&
++					!yaffs_CheckSpaceForAllocation(in->myDev)) {
+ 					/* Drop the cache if it was a read cache item and
+ 					 * no space check has been made for it.
+ 					 */
+@@ -4788,16 +4840,12 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 				if (cache) {
+ 					yaffs_UseChunkCache(dev, cache, 1);
+ 					cache->locked = 1;
+-#ifdef CONFIG_YAFFS_WINCE
+-					yfsd_UnlockYAFFS(TRUE);
+-#endif
++
+ 
+ 					memcpy(&cache->data[start], buffer,
+ 					       nToCopy);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-					yfsd_LockYAFFS(TRUE);
+-#endif
++
+ 					cache->locked = 0;
+ 					cache->nBytes = nToWriteBack;
+ 
+@@ -4825,15 +4873,10 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 				yaffs_ReadChunkDataFromObject(in, chunk,
+ 							      localBuffer);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_UnlockYAFFS(TRUE);
+-#endif
++
+ 
+ 				memcpy(&localBuffer[start], buffer, nToCopy);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_LockYAFFS(TRUE);
+-#endif
+ 				chunkWritten =
+ 				    yaffs_WriteChunkDataToObject(in, chunk,
+ 								 localBuffer,
+@@ -4846,31 +4889,15 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 			}
+ 
+ 		} else {
+-
+-#ifdef CONFIG_YAFFS_WINCE
+-			/* Under WinCE can't do direct transfer. Need to use a local buffer.
+-			 * This is because we otherwise screw up WinCE's memory mapper
+-			 */
+-			__u8 *localBuffer = yaffs_GetTempBuffer(dev, __LINE__);
+-#ifdef CONFIG_YAFFS_WINCE
+-			yfsd_UnlockYAFFS(TRUE);
+-#endif
+-			memcpy(localBuffer, buffer, dev->nDataBytesPerChunk);
+-#ifdef CONFIG_YAFFS_WINCE
+-			yfsd_LockYAFFS(TRUE);
+-#endif
+-			chunkWritten =
+-			    yaffs_WriteChunkDataToObject(in, chunk, localBuffer,
+-							 dev->nDataBytesPerChunk,
+-							 0);
+-			yaffs_ReleaseTempBuffer(dev, localBuffer, __LINE__);
+-#else
+ 			/* A full chunk. Write directly from the supplied buffer. */
++
++
++
+ 			chunkWritten =
+ 			    yaffs_WriteChunkDataToObject(in, chunk, buffer,
+ 							 dev->nDataBytesPerChunk,
+ 							 0);
+-#endif
++
+ 			/* Since we've overwritten the cached data, we better invalidate it. */
+ 			yaffs_InvalidateChunkCache(in, chunk);
+ 		}
+@@ -4886,9 +4913,8 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 
+ 	/* Update file object */
+ 
+-	if ((startOfWrite + nDone) > in->variant.fileVariant.fileSize) {
++	if ((startOfWrite + nDone) > in->variant.fileVariant.fileSize)
+ 		in->variant.fileVariant.fileSize = (startOfWrite + nDone);
+-	}
+ 
+ 	in->dirty = 1;
+ 
+@@ -4898,7 +4924,7 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 
+ /* ---------------------- File resizing stuff ------------------ */
+ 
+-static void yaffs_PruneResizedChunks(yaffs_Object * in, int newSize)
++static void yaffs_PruneResizedChunks(yaffs_Object *in, int newSize)
+ {
+ 
+ 	yaffs_Device *dev = in->myDev;
+@@ -4939,11 +4965,11 @@ static void yaffs_PruneResizedChunks(yaf
+ 
+ }
+ 
+-int yaffs_ResizeFile(yaffs_Object * in, loff_t newSize)
++int yaffs_ResizeFile(yaffs_Object *in, loff_t newSize)
+ {
+ 
+ 	int oldFileSize = in->variant.fileVariant.fileSize;
+-	int newSizeOfPartialChunk;
++	__u32 newSizeOfPartialChunk;
+ 	int newFullChunks;
+ 
+ 	yaffs_Device *dev = in->myDev;
+@@ -4955,13 +4981,11 @@ int yaffs_ResizeFile(yaffs_Object * in,
+ 
+ 	yaffs_CheckGarbageCollection(dev);
+ 
+-	if (in->variantType != YAFFS_OBJECT_TYPE_FILE) {
+-		return yaffs_GetFileSize(in);
+-	}
++	if (in->variantType != YAFFS_OBJECT_TYPE_FILE)
++		return YAFFS_FAIL;
+ 
+-	if (newSize == oldFileSize) {
+-		return oldFileSize;
+-	}
++	if (newSize == oldFileSize)
++		return YAFFS_OK;
+ 
+ 	if (newSize < oldFileSize) {
+ 
+@@ -4994,21 +5018,20 @@ int yaffs_ResizeFile(yaffs_Object * in,
+ 	}
+ 
+ 
+-
+ 	/* Write a new object header.
+ 	 * show we've shrunk the file, if need be
+ 	 * Do this only if the file is not in the deleted directories.
+ 	 */
+-	if (in->parent->objectId != YAFFS_OBJECTID_UNLINKED &&
+-	    in->parent->objectId != YAFFS_OBJECTID_DELETED) {
++	if (in->parent &&
++	    in->parent->objectId != YAFFS_OBJECTID_UNLINKED &&
++	    in->parent->objectId != YAFFS_OBJECTID_DELETED)
+ 		yaffs_UpdateObjectHeader(in, NULL, 0,
+ 					 (newSize < oldFileSize) ? 1 : 0, 0);
+-	}
+ 
+-	return newSize;
++	return YAFFS_OK;
+ }
+ 
+-loff_t yaffs_GetFileSize(yaffs_Object * obj)
++loff_t yaffs_GetFileSize(yaffs_Object *obj)
+ {
+ 	obj = yaffs_GetEquivalentObject(obj);
+ 
+@@ -5024,7 +5047,7 @@ loff_t yaffs_GetFileSize(yaffs_Object *
+ 
+ 
+ 
+-int yaffs_FlushFile(yaffs_Object * in, int updateTime)
++int yaffs_FlushFile(yaffs_Object *in, int updateTime)
+ {
+ 	int retVal;
+ 	if (in->dirty) {
+@@ -5039,9 +5062,8 @@ int yaffs_FlushFile(yaffs_Object * in, i
+ #endif
+ 		}
+ 
+-		retVal =
+-		    (yaffs_UpdateObjectHeader(in, NULL, 0, 0, 0) >=
+-		     0) ? YAFFS_OK : YAFFS_FAIL;
++		retVal = (yaffs_UpdateObjectHeader(in, NULL, 0, 0, 0) >=
++			0) ? YAFFS_OK : YAFFS_FAIL;
+ 	} else {
+ 		retVal = YAFFS_OK;
+ 	}
+@@ -5050,7 +5072,7 @@ int yaffs_FlushFile(yaffs_Object * in, i
+ 
+ }
+ 
+-static int yaffs_DoGenericObjectDeletion(yaffs_Object * in)
++static int yaffs_DoGenericObjectDeletion(yaffs_Object *in)
+ {
+ 
+ 	/* First off, invalidate the file's data in the cache, without flushing. */
+@@ -5058,13 +5080,13 @@ static int yaffs_DoGenericObjectDeletion
+ 
+ 	if (in->myDev->isYaffs2 && (in->parent != in->myDev->deletedDir)) {
+ 		/* Move to the unlinked directory so we have a record that it was deleted. */
+-		yaffs_ChangeObjectName(in, in->myDev->deletedDir,"deleted", 0, 0);
++		yaffs_ChangeObjectName(in, in->myDev->deletedDir, _Y("deleted"), 0, 0);
+ 
+ 	}
+ 
+ 	yaffs_RemoveObjectFromDirectory(in);
+-	yaffs_DeleteChunk(in->myDev, in->chunkId, 1, __LINE__);
+-	in->chunkId = -1;
++	yaffs_DeleteChunk(in->myDev, in->hdrChunk, 1, __LINE__);
++	in->hdrChunk = 0;
+ 
+ 	yaffs_FreeObject(in);
+ 	return YAFFS_OK;
+@@ -5075,62 +5097,63 @@ static int yaffs_DoGenericObjectDeletion
+  * and the inode associated with the file.
+  * It does not delete the links associated with the file.
+  */
+-static int yaffs_UnlinkFile(yaffs_Object * in)
++static int yaffs_UnlinkFileIfNeeded(yaffs_Object *in)
+ {
+ 
+ 	int retVal;
+ 	int immediateDeletion = 0;
+ 
+-	if (1) {
+ #ifdef __KERNEL__
+-		if (!in->myInode) {
+-			immediateDeletion = 1;
+-
+-		}
++	if (!in->myInode)
++		immediateDeletion = 1;
+ #else
+-		if (in->inUse <= 0) {
+-			immediateDeletion = 1;
+-
+-		}
++	if (in->inUse <= 0)
++		immediateDeletion = 1;
+ #endif
+-		if (immediateDeletion) {
+-			retVal =
+-			    yaffs_ChangeObjectName(in, in->myDev->deletedDir,
+-						   "deleted", 0, 0);
+-			T(YAFFS_TRACE_TRACING,
+-			  (TSTR("yaffs: immediate deletion of file %d" TENDSTR),
+-			   in->objectId));
+-			in->deleted = 1;
+-			in->myDev->nDeletedFiles++;
+-			if (0 && in->myDev->isYaffs2) {
+-				yaffs_ResizeFile(in, 0);
+-			}
+-			yaffs_SoftDeleteFile(in);
+-		} else {
+-			retVal =
+-			    yaffs_ChangeObjectName(in, in->myDev->unlinkedDir,
+-						   "unlinked", 0, 0);
+-		}
+ 
++	if (immediateDeletion) {
++		retVal =
++		    yaffs_ChangeObjectName(in, in->myDev->deletedDir,
++					   _Y("deleted"), 0, 0);
++		T(YAFFS_TRACE_TRACING,
++		  (TSTR("yaffs: immediate deletion of file %d" TENDSTR),
++		   in->objectId));
++		in->deleted = 1;
++		in->myDev->nDeletedFiles++;
++		if (1 || in->myDev->isYaffs2)
++			yaffs_ResizeFile(in, 0);
++		yaffs_SoftDeleteFile(in);
++	} else {
++		retVal =
++		    yaffs_ChangeObjectName(in, in->myDev->unlinkedDir,
++					   _Y("unlinked"), 0, 0);
+ 	}
++
++
+ 	return retVal;
+ }
+ 
+-int yaffs_DeleteFile(yaffs_Object * in)
++int yaffs_DeleteFile(yaffs_Object *in)
+ {
+ 	int retVal = YAFFS_OK;
++	int deleted = in->deleted;
++
++	yaffs_ResizeFile(in, 0);
+ 
+ 	if (in->nDataChunks > 0) {
+-		/* Use soft deletion if there is data in the file */
+-		if (!in->unlinked) {
+-			retVal = yaffs_UnlinkFile(in);
+-		}
++		/* Use soft deletion if there is data in the file.
++		 * That won't be the case if it has been resized to zero.
++		 */
++		if (!in->unlinked)
++			retVal = yaffs_UnlinkFileIfNeeded(in);
++
+ 		if (retVal == YAFFS_OK && in->unlinked && !in->deleted) {
+ 			in->deleted = 1;
++			deleted = 1;
+ 			in->myDev->nDeletedFiles++;
+ 			yaffs_SoftDeleteFile(in);
+ 		}
+-		return in->deleted ? YAFFS_OK : YAFFS_FAIL;
++		return deleted ? YAFFS_OK : YAFFS_FAIL;
+ 	} else {
+ 		/* The file has no data chunks so we toss it immediately */
+ 		yaffs_FreeTnode(in->myDev, in->variant.fileVariant.top);
+@@ -5141,62 +5164,75 @@ int yaffs_DeleteFile(yaffs_Object * in)
+ 	}
+ }
+ 
+-static int yaffs_DeleteDirectory(yaffs_Object * in)
++static int yaffs_DeleteDirectory(yaffs_Object *in)
+ {
+ 	/* First check that the directory is empty. */
+-	if (list_empty(&in->variant.directoryVariant.children)) {
++	if (ylist_empty(&in->variant.directoryVariant.children))
+ 		return yaffs_DoGenericObjectDeletion(in);
+-	}
+ 
+ 	return YAFFS_FAIL;
+ 
+ }
+ 
+-static int yaffs_DeleteSymLink(yaffs_Object * in)
++static int yaffs_DeleteSymLink(yaffs_Object *in)
+ {
+ 	YFREE(in->variant.symLinkVariant.alias);
+ 
+ 	return yaffs_DoGenericObjectDeletion(in);
+ }
+ 
+-static int yaffs_DeleteHardLink(yaffs_Object * in)
++static int yaffs_DeleteHardLink(yaffs_Object *in)
+ {
+ 	/* remove this hardlink from the list assocaited with the equivalent
+ 	 * object
+ 	 */
+-	list_del(&in->hardLinks);
++	ylist_del_init(&in->hardLinks);
+ 	return yaffs_DoGenericObjectDeletion(in);
+ }
+ 
+-static void yaffs_DestroyObject(yaffs_Object * obj)
++int yaffs_DeleteObject(yaffs_Object *obj)
+ {
++int retVal = -1;
+ 	switch (obj->variantType) {
+ 	case YAFFS_OBJECT_TYPE_FILE:
+-		yaffs_DeleteFile(obj);
++		retVal = yaffs_DeleteFile(obj);
+ 		break;
+ 	case YAFFS_OBJECT_TYPE_DIRECTORY:
+-		yaffs_DeleteDirectory(obj);
++		return yaffs_DeleteDirectory(obj);
+ 		break;
+ 	case YAFFS_OBJECT_TYPE_SYMLINK:
+-		yaffs_DeleteSymLink(obj);
++		retVal = yaffs_DeleteSymLink(obj);
+ 		break;
+ 	case YAFFS_OBJECT_TYPE_HARDLINK:
+-		yaffs_DeleteHardLink(obj);
++		retVal = yaffs_DeleteHardLink(obj);
+ 		break;
+ 	case YAFFS_OBJECT_TYPE_SPECIAL:
+-		yaffs_DoGenericObjectDeletion(obj);
++		retVal = yaffs_DoGenericObjectDeletion(obj);
+ 		break;
+ 	case YAFFS_OBJECT_TYPE_UNKNOWN:
++		retVal = 0;
+ 		break;		/* should not happen. */
+ 	}
++
++	return retVal;
+ }
+ 
+-static int yaffs_UnlinkWorker(yaffs_Object * obj)
++static int yaffs_UnlinkWorker(yaffs_Object *obj)
+ {
+ 
++	int immediateDeletion = 0;
++
++#ifdef __KERNEL__
++	if (!obj->myInode)
++		immediateDeletion = 1;
++#else
++	if (obj->inUse <= 0)
++		immediateDeletion = 1;
++#endif
++
+ 	if (obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) {
+ 		return yaffs_DeleteHardLink(obj);
+-	} else if (!list_empty(&obj->hardLinks)) {
++	} else if (!ylist_empty(&obj->hardLinks)) {
+ 		/* Curve ball: We're unlinking an object that has a hardlink.
+ 		 *
+ 		 * This problem arises because we are not strictly following
+@@ -5215,24 +5251,24 @@ static int yaffs_UnlinkWorker(yaffs_Obje
+ 		int retVal;
+ 		YCHAR name[YAFFS_MAX_NAME_LENGTH + 1];
+ 
+-		hl = list_entry(obj->hardLinks.next, yaffs_Object, hardLinks);
++		hl = ylist_entry(obj->hardLinks.next, yaffs_Object, hardLinks);
+ 
+-		list_del_init(&hl->hardLinks);
+-		list_del_init(&hl->siblings);
++		ylist_del_init(&hl->hardLinks);
++		ylist_del_init(&hl->siblings);
+ 
+ 		yaffs_GetObjectName(hl, name, YAFFS_MAX_NAME_LENGTH + 1);
+ 
+ 		retVal = yaffs_ChangeObjectName(obj, hl->parent, name, 0, 0);
+ 
+-		if (retVal == YAFFS_OK) {
++		if (retVal == YAFFS_OK)
+ 			retVal = yaffs_DoGenericObjectDeletion(hl);
+-		}
++
+ 		return retVal;
+ 
+-	} else {
++	} else if (immediateDeletion) {
+ 		switch (obj->variantType) {
+ 		case YAFFS_OBJECT_TYPE_FILE:
+-			return yaffs_UnlinkFile(obj);
++			return yaffs_DeleteFile(obj);
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_DIRECTORY:
+ 			return yaffs_DeleteDirectory(obj);
+@@ -5248,21 +5284,22 @@ static int yaffs_UnlinkWorker(yaffs_Obje
+ 		default:
+ 			return YAFFS_FAIL;
+ 		}
+-	}
++	} else
++		return yaffs_ChangeObjectName(obj, obj->myDev->unlinkedDir,
++					   _Y("unlinked"), 0, 0);
+ }
+ 
+ 
+-static int yaffs_UnlinkObject( yaffs_Object *obj)
++static int yaffs_UnlinkObject(yaffs_Object *obj)
+ {
+ 
+-	if (obj && obj->unlinkAllowed) {
++	if (obj && obj->unlinkAllowed)
+ 		return yaffs_UnlinkWorker(obj);
+-	}
+ 
+ 	return YAFFS_FAIL;
+ 
+ }
+-int yaffs_Unlink(yaffs_Object * dir, const YCHAR * name)
++int yaffs_Unlink(yaffs_Object *dir, const YCHAR *name)
+ {
+ 	yaffs_Object *obj;
+ 
+@@ -5272,8 +5309,8 @@ int yaffs_Unlink(yaffs_Object * dir, con
+ 
+ /*----------------------- Initialisation Scanning ---------------------- */
+ 
+-static void yaffs_HandleShadowedObject(yaffs_Device * dev, int objId,
+-				       int backwardScanning)
++static void yaffs_HandleShadowedObject(yaffs_Device *dev, int objId,
++				int backwardScanning)
+ {
+ 	yaffs_Object *obj;
+ 
+@@ -5286,9 +5323,8 @@ static void yaffs_HandleShadowedObject(y
+ 		/* Handle YAFFS2 case (backward scanning)
+ 		 * If the shadowed object exists then ignore.
+ 		 */
+-		if (yaffs_FindObjectByNumber(dev, objId)) {
++		if (yaffs_FindObjectByNumber(dev, objId))
+ 			return;
+-		}
+ 	}
+ 
+ 	/* Let's create it (if it does not exist) assuming it is a file so that it can do shrinking etc.
+@@ -5297,6 +5333,8 @@ static void yaffs_HandleShadowedObject(y
+ 	obj =
+ 	    yaffs_FindOrCreateObjectByNumber(dev, objId,
+ 					     YAFFS_OBJECT_TYPE_FILE);
++	if (!obj)
++		return;
+ 	yaffs_AddObjectToDirectory(dev->unlinkedDir, obj);
+ 	obj->variant.fileVariant.shrinkSize = 0;
+ 	obj->valid = 1;		/* So that we don't read any other info for this file */
+@@ -5325,44 +5363,77 @@ static void yaffs_HardlinkFixup(yaffs_De
+ 		if (in) {
+ 			/* Add the hardlink pointers */
+ 			hl->variant.hardLinkVariant.equivalentObject = in;
+-			list_add(&hl->hardLinks, &in->hardLinks);
++			ylist_add(&hl->hardLinks, &in->hardLinks);
+ 		} else {
+ 			/* Todo Need to report/handle this better.
+ 			 * Got a problem... hardlink to a non-existant object
+ 			 */
+ 			hl->variant.hardLinkVariant.equivalentObject = NULL;
+-			INIT_LIST_HEAD(&hl->hardLinks);
++			YINIT_LIST_HEAD(&hl->hardLinks);
+ 
+ 		}
+-
+ 	}
++}
++
++
+ 
++
++
++static int ybicmp(const void *a, const void *b)
++{
++	register int aseq = ((yaffs_BlockIndex *)a)->seq;
++	register int bseq = ((yaffs_BlockIndex *)b)->seq;
++	register int ablock = ((yaffs_BlockIndex *)a)->block;
++	register int bblock = ((yaffs_BlockIndex *)b)->block;
++	if (aseq == bseq)
++		return ablock - bblock;
++	else
++		return aseq - bseq;
+ }
+ 
+ 
++struct yaffs_ShadowFixerStruct {
++	int objectId;
++	int shadowedId;
++	struct yaffs_ShadowFixerStruct *next;
++};
++
+ 
++static void yaffs_StripDeletedObjects(yaffs_Device *dev)
++{
++	/*
++	*  Sort out state of unlinked and deleted objects after scanning.
++	*/
++	struct ylist_head *i;
++	struct ylist_head *n;
++	yaffs_Object *l;
+ 
++	/* Soft delete all the unlinked files */
++	ylist_for_each_safe(i, n,
++		&dev->unlinkedDir->variant.directoryVariant.children) {
++		if (i) {
++			l = ylist_entry(i, yaffs_Object, siblings);
++			yaffs_DeleteObject(l);
++		}
++	}
+ 
+-static int ybicmp(const void *a, const void *b){
+-    register int aseq = ((yaffs_BlockIndex *)a)->seq;
+-    register int bseq = ((yaffs_BlockIndex *)b)->seq;
+-    register int ablock = ((yaffs_BlockIndex *)a)->block;
+-    register int bblock = ((yaffs_BlockIndex *)b)->block;
+-    if( aseq == bseq )
+-        return ablock - bblock;
+-    else
+-        return aseq - bseq;
++	ylist_for_each_safe(i, n,
++		&dev->deletedDir->variant.directoryVariant.children) {
++		if (i) {
++			l = ylist_entry(i, yaffs_Object, siblings);
++			yaffs_DeleteObject(l);
++		}
++	}
+ 
+ }
+ 
+-static int yaffs_Scan(yaffs_Device * dev)
++static int yaffs_Scan(yaffs_Device *dev)
+ {
+ 	yaffs_ExtendedTags tags;
+ 	int blk;
+ 	int blockIterator;
+ 	int startIterator;
+ 	int endIterator;
+-	int nBlocksToScan = 0;
+ 	int result;
+ 
+ 	int chunk;
+@@ -5371,26 +5442,19 @@ static int yaffs_Scan(yaffs_Device * dev
+ 	yaffs_BlockState state;
+ 	yaffs_Object *hardList = NULL;
+ 	yaffs_BlockInfo *bi;
+-	int sequenceNumber;
++	__u32 sequenceNumber;
+ 	yaffs_ObjectHeader *oh;
+ 	yaffs_Object *in;
+ 	yaffs_Object *parent;
+-	int nBlocks = dev->internalEndBlock - dev->internalStartBlock + 1;
+ 
+ 	int alloc_failed = 0;
+ 
++	struct yaffs_ShadowFixerStruct *shadowFixerList = NULL;
++
+ 
+ 	__u8 *chunkData;
+ 
+-	yaffs_BlockIndex *blockIndex = NULL;
+ 
+-	if (dev->isYaffs2) {
+-		T(YAFFS_TRACE_SCAN,
+-		  (TSTR("yaffs_Scan is not for YAFFS2!" TENDSTR)));
+-		return YAFFS_FAIL;
+-	}
+-
+-	//TODO  Throw all the yaffs2 stuuf out of yaffs_Scan since it is only for yaffs1 format.
+ 
+ 	T(YAFFS_TRACE_SCAN,
+ 	  (TSTR("yaffs_Scan starts  intstartblk %d intendblk %d..." TENDSTR),
+@@ -5400,12 +5464,6 @@ static int yaffs_Scan(yaffs_Device * dev
+ 
+ 	dev->sequenceNumber = YAFFS_LOWEST_SEQUENCE_NUMBER;
+ 
+-	if (dev->isYaffs2) {
+-		blockIndex = YMALLOC(nBlocks * sizeof(yaffs_BlockIndex));
+-		if(!blockIndex)
+-			return YAFFS_FAIL;
+-	}
+-
+ 	/* Scan all the blocks to determine their state */
+ 	for (blk = dev->internalStartBlock; blk <= dev->internalEndBlock; blk++) {
+ 		bi = yaffs_GetBlockInfo(dev, blk);
+@@ -5418,6 +5476,9 @@ static int yaffs_Scan(yaffs_Device * dev
+ 		bi->blockState = state;
+ 		bi->sequenceNumber = sequenceNumber;
+ 
++		if (bi->sequenceNumber == YAFFS_SEQUENCE_BAD_BLOCK)
++			bi->blockState = state = YAFFS_BLOCK_STATE_DEAD;
++
+ 		T(YAFFS_TRACE_SCAN_DEBUG,
+ 		  (TSTR("Block scanning block %d state %d seq %d" TENDSTR), blk,
+ 		   state, sequenceNumber));
+@@ -5430,70 +5491,21 @@ static int yaffs_Scan(yaffs_Device * dev
+ 			  (TSTR("Block empty " TENDSTR)));
+ 			dev->nErasedBlocks++;
+ 			dev->nFreeChunks += dev->nChunksPerBlock;
+-		} else if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING) {
+-
+-			/* Determine the highest sequence number */
+-			if (dev->isYaffs2 &&
+-			    sequenceNumber >= YAFFS_LOWEST_SEQUENCE_NUMBER &&
+-			    sequenceNumber < YAFFS_HIGHEST_SEQUENCE_NUMBER) {
+-
+-				blockIndex[nBlocksToScan].seq = sequenceNumber;
+-				blockIndex[nBlocksToScan].block = blk;
+-
+-				nBlocksToScan++;
+-
+-				if (sequenceNumber >= dev->sequenceNumber) {
+-					dev->sequenceNumber = sequenceNumber;
+-				}
+-			} else if (dev->isYaffs2) {
+-				/* TODO: Nasty sequence number! */
+-				T(YAFFS_TRACE_SCAN,
+-				  (TSTR
+-				   ("Block scanning block %d has bad sequence number %d"
+-				    TENDSTR), blk, sequenceNumber));
+-
+-			}
+ 		}
+ 	}
+ 
+-	/* Sort the blocks
+-	 * Dungy old bubble sort for now...
+-	 */
+-	if (dev->isYaffs2) {
+-		yaffs_BlockIndex temp;
+-		int i;
+-		int j;
+-
+-		for (i = 0; i < nBlocksToScan; i++)
+-			for (j = i + 1; j < nBlocksToScan; j++)
+-				if (blockIndex[i].seq > blockIndex[j].seq) {
+-					temp = blockIndex[j];
+-					blockIndex[j] = blockIndex[i];
+-					blockIndex[i] = temp;
+-				}
+-	}
+-
+-	/* Now scan the blocks looking at the data. */
+-	if (dev->isYaffs2) {
+-		startIterator = 0;
+-		endIterator = nBlocksToScan - 1;
+-		T(YAFFS_TRACE_SCAN_DEBUG,
+-		  (TSTR("%d blocks to be scanned" TENDSTR), nBlocksToScan));
+-	} else {
+-		startIterator = dev->internalStartBlock;
+-		endIterator = dev->internalEndBlock;
+-	}
++	startIterator = dev->internalStartBlock;
++	endIterator = dev->internalEndBlock;
+ 
+ 	/* For each block.... */
+ 	for (blockIterator = startIterator; !alloc_failed && blockIterator <= endIterator;
+ 	     blockIterator++) {
+ 
+-		if (dev->isYaffs2) {
+-			/* get the block to scan in the correct order */
+-			blk = blockIndex[blockIterator].block;
+-		} else {
+-			blk = blockIterator;
+-		}
++		YYIELD();
++
++		YYIELD();
++
++		blk = blockIterator;
+ 
+ 		bi = yaffs_GetBlockInfo(dev, blk);
+ 		state = bi->blockState;
+@@ -5511,7 +5523,7 @@ static int yaffs_Scan(yaffs_Device * dev
+ 
+ 			/* Let's have a good look at this chunk... */
+ 
+-			if (!dev->isYaffs2 && tags.chunkDeleted) {
++			if (tags.eccResult == YAFFS_ECC_RESULT_UNFIXED || tags.chunkDeleted) {
+ 				/* YAFFS1 only...
+ 				 * A deleted chunk
+ 				 */
+@@ -5540,18 +5552,6 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					dev->allocationBlockFinder = blk;
+ 					/* Set it to here to encourage the allocator to go forth from here. */
+ 
+-					/* Yaffs2 sanity check:
+-					 * This should be the one with the highest sequence number
+-					 */
+-					if (dev->isYaffs2
+-					    && (dev->sequenceNumber !=
+-						bi->sequenceNumber)) {
+-						T(YAFFS_TRACE_ALWAYS,
+-						  (TSTR
+-						   ("yaffs: Allocation block %d was not highest sequence id:"
+-						    " block seq = %d, dev seq = %d"
+-						    TENDSTR), blk,bi->sequenceNumber,dev->sequenceNumber));
+-					}
+ 				}
+ 
+ 				dev->nFreeChunks += (dev->nChunksPerBlock - c);
+@@ -5570,11 +5570,11 @@ static int yaffs_Scan(yaffs_Device * dev
+ 				 * the same chunkId).
+ 				 */
+ 
+-				if(!in)
++				if (!in)
+ 					alloc_failed = 1;
+ 
+-				if(in){
+-					if(!yaffs_PutChunkIntoFile(in, tags.chunkId, chunk,1))
++				if (in) {
++					if (!yaffs_PutChunkIntoFile(in, tags.chunkId, chunk, 1))
+ 						alloc_failed = 1;
+ 				}
+ 
+@@ -5617,7 +5617,7 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					 * deleted, and worse still it has changed type. Delete the old object.
+ 					 */
+ 
+-					yaffs_DestroyObject(in);
++					yaffs_DeleteObject(in);
+ 
+ 					in = 0;
+ 				}
+@@ -5627,14 +5627,20 @@ static int yaffs_Scan(yaffs_Device * dev
+ 								      objectId,
+ 								      oh->type);
+ 
+-				if(!in)
++				if (!in)
+ 					alloc_failed = 1;
+ 
+ 				if (in && oh->shadowsObject > 0) {
+-					yaffs_HandleShadowedObject(dev,
+-								   oh->
+-								   shadowsObject,
+-								   0);
++
++					struct yaffs_ShadowFixerStruct *fixer;
++					fixer = YMALLOC(sizeof(struct yaffs_ShadowFixerStruct));
++					if (fixer) {
++						fixer->next = shadowFixerList;
++						shadowFixerList = fixer;
++						fixer->objectId = tags.objectId;
++						fixer->shadowedId = oh->shadowsObject;
++					}
++
+ 				}
+ 
+ 				if (in && in->valid) {
+@@ -5643,12 +5649,10 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					unsigned existingSerial = in->serial;
+ 					unsigned newSerial = tags.serialNumber;
+ 
+-					if (dev->isYaffs2 ||
+-					    ((existingSerial + 1) & 3) ==
+-					    newSerial) {
++					if (((existingSerial + 1) & 3) == newSerial) {
+ 						/* Use new one - destroy the exisiting one */
+ 						yaffs_DeleteChunk(dev,
+-								  in->chunkId,
++								  in->hdrChunk,
+ 								  1, __LINE__);
+ 						in->valid = 0;
+ 					} else {
+@@ -5681,7 +5685,8 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					in->yst_ctime = oh->yst_ctime;
+ 					in->yst_rdev = oh->yst_rdev;
+ #endif
+-					in->chunkId = chunk;
++					in->hdrChunk = chunk;
++					in->serial = tags.serialNumber;
+ 
+ 				} else if (in && !in->valid) {
+ 					/* we need to load this info */
+@@ -5705,7 +5710,8 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					in->yst_ctime = oh->yst_ctime;
+ 					in->yst_rdev = oh->yst_rdev;
+ #endif
+-					in->chunkId = chunk;
++					in->hdrChunk = chunk;
++					in->serial = tags.serialNumber;
+ 
+ 					yaffs_SetObjectName(in, oh->name);
+ 					in->dirty = 0;
+@@ -5718,25 +5724,25 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					    yaffs_FindOrCreateObjectByNumber
+ 					    (dev, oh->parentObjectId,
+ 					     YAFFS_OBJECT_TYPE_DIRECTORY);
+-					if (parent->variantType ==
++					if (!parent)
++						alloc_failed = 1;
++					if (parent && parent->variantType ==
+ 					    YAFFS_OBJECT_TYPE_UNKNOWN) {
+ 						/* Set up as a directory */
+ 						parent->variantType =
+-						    YAFFS_OBJECT_TYPE_DIRECTORY;
+-						INIT_LIST_HEAD(&parent->variant.
+-							       directoryVariant.
+-							       children);
+-					} else if (parent->variantType !=
+-						   YAFFS_OBJECT_TYPE_DIRECTORY)
+-					{
++							YAFFS_OBJECT_TYPE_DIRECTORY;
++						YINIT_LIST_HEAD(&parent->variant.
++								directoryVariant.
++								children);
++					} else if (!parent || parent->variantType !=
++						   YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 						/* Hoosterman, another problem....
+ 						 * We're trying to use a non-directory as a directory
+ 						 */
+ 
+ 						T(YAFFS_TRACE_ERROR,
+ 						  (TSTR
+-						   ("yaffs tragedy: attempting to use non-directory as"
+-						    " a directory in scan. Put in lost+found."
++						   ("yaffs tragedy: attempting to use non-directory as a directory in scan. Put in lost+found."
+ 						    TENDSTR)));
+ 						parent = dev->lostNFoundDir;
+ 					}
+@@ -5760,15 +5766,6 @@ static int yaffs_Scan(yaffs_Device * dev
+ 						/* Todo got a problem */
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_FILE:
+-						if (dev->isYaffs2
+-						    && oh->isShrink) {
+-							/* Prune back the shrunken chunks */
+-							yaffs_PruneResizedChunks
+-							    (in, oh->fileSize);
+-							/* Mark the block as having a shrinkHeader */
+-							bi->hasShrinkHeader = 1;
+-						}
+-
+ 						if (dev->useHeaderFileSize)
+ 
+ 							in->variant.fileVariant.
+@@ -5778,11 +5775,11 @@ static int yaffs_Scan(yaffs_Device * dev
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_HARDLINK:
+ 						in->variant.hardLinkVariant.
+-						    equivalentObjectId =
+-						    oh->equivalentObjectId;
++							equivalentObjectId =
++							oh->equivalentObjectId;
+ 						in->hardLinks.next =
+-						    (struct list_head *)
+-						    hardList;
++							(struct ylist_head *)
++							hardList;
+ 						hardList = in;
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_DIRECTORY:
+@@ -5794,15 +5791,17 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					case YAFFS_OBJECT_TYPE_SYMLINK:
+ 						in->variant.symLinkVariant.alias =
+ 						    yaffs_CloneString(oh->alias);
+-						if(!in->variant.symLinkVariant.alias)
++						if (!in->variant.symLinkVariant.alias)
+ 							alloc_failed = 1;
+ 						break;
+ 					}
+ 
++/*
+ 					if (parent == dev->deletedDir) {
+ 						yaffs_DestroyObject(in);
+ 						bi->hasShrinkHeader = 1;
+ 					}
++*/
+ 				}
+ 			}
+ 		}
+@@ -5823,10 +5822,6 @@ static int yaffs_Scan(yaffs_Device * dev
+ 
+ 	}
+ 
+-	if (blockIndex) {
+-		YFREE(blockIndex);
+-	}
+-
+ 
+ 	/* Ok, we've done all the scanning.
+ 	 * Fix up the hard link chains.
+@@ -5834,32 +5829,36 @@ static int yaffs_Scan(yaffs_Device * dev
+ 	 * hardlinks.
+ 	 */
+ 
+-	yaffs_HardlinkFixup(dev,hardList);
++	yaffs_HardlinkFixup(dev, hardList);
+ 
+-	/* Handle the unlinked files. Since they were left in an unlinked state we should
+-	 * just delete them.
+-	 */
++	/* Fix up any shadowed objects */
+ 	{
+-		struct list_head *i;
+-		struct list_head *n;
++		struct yaffs_ShadowFixerStruct *fixer;
++		yaffs_Object *obj;
+ 
+-		yaffs_Object *l;
+-		/* Soft delete all the unlinked files */
+-		list_for_each_safe(i, n,
+-				   &dev->unlinkedDir->variant.directoryVariant.
+-				   children) {
+-			if (i) {
+-				l = list_entry(i, yaffs_Object, siblings);
+-				yaffs_DestroyObject(l);
+-			}
++		while (shadowFixerList) {
++			fixer = shadowFixerList;
++			shadowFixerList = fixer->next;
++			/* Complete the rename transaction by deleting the shadowed object
++			 * then setting the object header to unshadowed.
++			 */
++			obj = yaffs_FindObjectByNumber(dev, fixer->shadowedId);
++			if (obj)
++				yaffs_DeleteObject(obj);
++
++			obj = yaffs_FindObjectByNumber(dev, fixer->objectId);
++
++			if (obj)
++				yaffs_UpdateObjectHeader(obj, NULL, 1, 0, 0);
++
++			YFREE(fixer);
+ 		}
+ 	}
+ 
+ 	yaffs_ReleaseTempBuffer(dev, chunkData, __LINE__);
+ 
+-	if(alloc_failed){
++	if (alloc_failed)
+ 		return YAFFS_FAIL;
+-	}
+ 
+ 	T(YAFFS_TRACE_SCAN, (TSTR("yaffs_Scan ends" TENDSTR)));
+ 
+@@ -5871,25 +5870,27 @@ static void yaffs_CheckObjectDetailsLoad
+ {
+ 	__u8 *chunkData;
+ 	yaffs_ObjectHeader *oh;
+-	yaffs_Device *dev = in->myDev;
++	yaffs_Device *dev;
+ 	yaffs_ExtendedTags tags;
+ 	int result;
+ 	int alloc_failed = 0;
+ 
+-	if(!in)
++	if (!in)
+ 		return;
+ 
++	dev = in->myDev;
++
+ #if 0
+-	T(YAFFS_TRACE_SCAN,(TSTR("details for object %d %s loaded" TENDSTR),
++	T(YAFFS_TRACE_SCAN, (TSTR("details for object %d %s loaded" TENDSTR),
+ 		in->objectId,
+ 		in->lazyLoaded ? "not yet" : "already"));
+ #endif
+ 
+-	if(in->lazyLoaded){
++	if (in->lazyLoaded && in->hdrChunk > 0) {
+ 		in->lazyLoaded = 0;
+ 		chunkData = yaffs_GetTempBuffer(dev, __LINE__);
+ 
+-		result = yaffs_ReadChunkWithTagsFromNAND(dev,in->chunkId,chunkData,&tags);
++		result = yaffs_ReadChunkWithTagsFromNAND(dev, in->hdrChunk, chunkData, &tags);
+ 		oh = (yaffs_ObjectHeader *) chunkData;
+ 
+ 		in->yst_mode = oh->yst_mode;
+@@ -5911,18 +5912,18 @@ static void yaffs_CheckObjectDetailsLoad
+ #endif
+ 		yaffs_SetObjectName(in, oh->name);
+ 
+-		if(in->variantType == YAFFS_OBJECT_TYPE_SYMLINK){
+-			 in->variant.symLinkVariant.alias =
++		if (in->variantType == YAFFS_OBJECT_TYPE_SYMLINK) {
++			in->variant.symLinkVariant.alias =
+ 						    yaffs_CloneString(oh->alias);
+-			if(!in->variant.symLinkVariant.alias)
++			if (!in->variant.symLinkVariant.alias)
+ 				alloc_failed = 1; /* Not returned to caller */
+ 		}
+ 
+-		yaffs_ReleaseTempBuffer(dev,chunkData, __LINE__);
++		yaffs_ReleaseTempBuffer(dev, chunkData, __LINE__);
+ 	}
+ }
+ 
+-static int yaffs_ScanBackwards(yaffs_Device * dev)
++static int yaffs_ScanBackwards(yaffs_Device *dev)
+ {
+ 	yaffs_ExtendedTags tags;
+ 	int blk;
+@@ -5938,7 +5939,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 	yaffs_BlockState state;
+ 	yaffs_Object *hardList = NULL;
+ 	yaffs_BlockInfo *bi;
+-	int sequenceNumber;
++	__u32 sequenceNumber;
+ 	yaffs_ObjectHeader *oh;
+ 	yaffs_Object *in;
+ 	yaffs_Object *parent;
+@@ -5972,12 +5973,12 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 	blockIndex = YMALLOC(nBlocks * sizeof(yaffs_BlockIndex));
+ 
+-	if(!blockIndex) {
++	if (!blockIndex) {
+ 		blockIndex = YMALLOC_ALT(nBlocks * sizeof(yaffs_BlockIndex));
+ 		altBlockIndex = 1;
+ 	}
+ 
+-	if(!blockIndex) {
++	if (!blockIndex) {
+ 		T(YAFFS_TRACE_SCAN,
+ 		  (TSTR("yaffs_Scan() could not allocate block index!" TENDSTR)));
+ 		return YAFFS_FAIL;
+@@ -5999,15 +6000,17 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 		bi->blockState = state;
+ 		bi->sequenceNumber = sequenceNumber;
+ 
+-		if(bi->sequenceNumber == YAFFS_SEQUENCE_CHECKPOINT_DATA)
++		if (bi->sequenceNumber == YAFFS_SEQUENCE_CHECKPOINT_DATA)
+ 			bi->blockState = state = YAFFS_BLOCK_STATE_CHECKPOINT;
++		if (bi->sequenceNumber == YAFFS_SEQUENCE_BAD_BLOCK)
++			bi->blockState = state = YAFFS_BLOCK_STATE_DEAD;
+ 
+ 		T(YAFFS_TRACE_SCAN_DEBUG,
+ 		  (TSTR("Block scanning block %d state %d seq %d" TENDSTR), blk,
+ 		   state, sequenceNumber));
+ 
+ 
+-		if(state == YAFFS_BLOCK_STATE_CHECKPOINT){
++		if (state == YAFFS_BLOCK_STATE_CHECKPOINT) {
+ 			dev->blocksInCheckpoint++;
+ 
+ 		} else if (state == YAFFS_BLOCK_STATE_DEAD) {
+@@ -6021,8 +6024,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 		} else if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING) {
+ 
+ 			/* Determine the highest sequence number */
+-			if (dev->isYaffs2 &&
+-			    sequenceNumber >= YAFFS_LOWEST_SEQUENCE_NUMBER &&
++			if (sequenceNumber >= YAFFS_LOWEST_SEQUENCE_NUMBER &&
+ 			    sequenceNumber < YAFFS_HIGHEST_SEQUENCE_NUMBER) {
+ 
+ 				blockIndex[nBlocksToScan].seq = sequenceNumber;
+@@ -6030,10 +6032,9 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 				nBlocksToScan++;
+ 
+-				if (sequenceNumber >= dev->sequenceNumber) {
++				if (sequenceNumber >= dev->sequenceNumber)
+ 					dev->sequenceNumber = sequenceNumber;
+-				}
+-			} else if (dev->isYaffs2) {
++			} else {
+ 				/* TODO: Nasty sequence number! */
+ 				T(YAFFS_TRACE_SCAN,
+ 				  (TSTR
+@@ -6053,11 +6054,13 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 	/* Sort the blocks */
+ #ifndef CONFIG_YAFFS_USE_OWN_SORT
+-	yaffs_qsort(blockIndex, nBlocksToScan,
+-		sizeof(yaffs_BlockIndex), ybicmp);
++	{
++		/* Use qsort now. */
++		yaffs_qsort(blockIndex, nBlocksToScan, sizeof(yaffs_BlockIndex), ybicmp);
++	}
+ #else
+ 	{
+-	 	/* Dungy old bubble sort... */
++		/* Dungy old bubble sort... */
+ 
+ 		yaffs_BlockIndex temp;
+ 		int i;
+@@ -6075,7 +6078,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 	YYIELD();
+ 
+-    	T(YAFFS_TRACE_SCAN, (TSTR("...done" TENDSTR)));
++	T(YAFFS_TRACE_SCAN, (TSTR("...done" TENDSTR)));
+ 
+ 	/* Now scan the blocks looking at the data. */
+ 	startIterator = 0;
+@@ -6085,10 +6088,10 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 	/* For each block.... backwards */
+ 	for (blockIterator = endIterator; !alloc_failed && blockIterator >= startIterator;
+-	     blockIterator--) {
+-	        /* Cooperative multitasking! This loop can run for so
++			blockIterator--) {
++		/* Cooperative multitasking! This loop can run for so
+ 		   long that watchdog timers expire. */
+-	        YYIELD();
++		YYIELD();
+ 
+ 		/* get the block to scan in the correct order */
+ 		blk = blockIndex[blockIterator].block;
+@@ -6127,10 +6130,8 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 				 * this is the one being allocated from
+ 				 */
+ 
+-				if(foundChunksInBlock)
+-				{
++				if (foundChunksInBlock) {
+ 					/* This is a chunk that was skipped due to failing the erased check */
+-
+ 				} else if (c == 0) {
+ 					/* We're looking at the first chunk in the block so the block is unused */
+ 					state = YAFFS_BLOCK_STATE_EMPTY;
+@@ -6138,7 +6139,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 				} else {
+ 					if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING ||
+ 					    state == YAFFS_BLOCK_STATE_ALLOCATING) {
+-					    	if(dev->sequenceNumber == bi->sequenceNumber) {
++						if (dev->sequenceNumber == bi->sequenceNumber) {
+ 							/* this is the block being allocated from */
+ 
+ 							T(YAFFS_TRACE_SCAN,
+@@ -6150,27 +6151,31 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 							dev->allocationBlock = blk;
+ 							dev->allocationPage = c;
+ 							dev->allocationBlockFinder = blk;
+-						}
+-						else {
++						} else {
+ 							/* This is a partially written block that is not
+ 							 * the current allocation block. This block must have
+ 							 * had a write failure, so set up for retirement.
+ 							 */
+ 
+-							 bi->needsRetiring = 1;
++							 /* bi->needsRetiring = 1; ??? TODO */
+ 							 bi->gcPrioritise = 1;
+ 
+ 							 T(YAFFS_TRACE_ALWAYS,
+-							 (TSTR("Partially written block %d being set for retirement" TENDSTR),
++							 (TSTR("Partially written block %d detected" TENDSTR),
+ 							 blk));
+ 						}
+-
+ 					}
+-
+ 				}
+ 
+ 				dev->nFreeChunks++;
+ 
++			} else if (tags.eccResult == YAFFS_ECC_RESULT_UNFIXED) {
++				T(YAFFS_TRACE_SCAN,
++				  (TSTR(" Unfixed ECC in chunk(%d:%d), chunk ignored"TENDSTR),
++				  blk, c));
++
++				  dev->nFreeChunks++;
++
+ 			} else if (tags.chunkId > 0) {
+ 				/* chunkId > 0 so it is a data chunk... */
+ 				unsigned int endpos;
+@@ -6187,7 +6192,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 								      tags.
+ 								      objectId,
+ 								      YAFFS_OBJECT_TYPE_FILE);
+-				if(!in){
++				if (!in) {
+ 					/* Out of memory */
+ 					alloc_failed = 1;
+ 				}
+@@ -6197,8 +6202,8 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 				    && chunkBase <
+ 				    in->variant.fileVariant.shrinkSize) {
+ 					/* This has not been invalidated by a resize */
+-					if(!yaffs_PutChunkIntoFile(in, tags.chunkId,
+-							       chunk, -1)){
++					if (!yaffs_PutChunkIntoFile(in, tags.chunkId,
++							       chunk, -1)) {
+ 						alloc_failed = 1;
+ 					}
+ 
+@@ -6221,7 +6226,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 						    scannedFileSize;
+ 					}
+ 
+-				} else if(in) {
++				} else if (in) {
+ 					/* This chunk has been invalidated by a resize, so delete */
+ 					yaffs_DeleteChunk(dev, chunk, 1, __LINE__);
+ 
+@@ -6242,6 +6247,8 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 					in = yaffs_FindOrCreateObjectByNumber
+ 					    (dev, tags.objectId,
+ 					     tags.extraObjectType);
++					if (!in)
++						alloc_failed = 1;
+ 				}
+ 
+ 				if (!in ||
+@@ -6251,8 +6258,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 				    tags.extraShadows ||
+ 				    (!in->valid &&
+ 				    (tags.objectId == YAFFS_OBJECTID_ROOT ||
+-				     tags.objectId == YAFFS_OBJECTID_LOSTNFOUND))
+-				    ) {
++				     tags.objectId == YAFFS_OBJECTID_LOSTNFOUND))) {
+ 
+ 					/* If we don't have  valid info then we need to read the chunk
+ 					 * TODO In future we can probably defer reading the chunk and
+@@ -6266,8 +6272,17 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 					oh = (yaffs_ObjectHeader *) chunkData;
+ 
+-					if (!in)
++					if (dev->inbandTags) {
++						/* Fix up the header if they got corrupted by inband tags */
++						oh->shadowsObject = oh->inbandShadowsObject;
++						oh->isShrink = oh->inbandIsShrink;
++					}
++
++					if (!in) {
+ 						in = yaffs_FindOrCreateObjectByNumber(dev, tags.objectId, oh->type);
++						if (!in)
++							alloc_failed = 1;
++					}
+ 
+ 				}
+ 
+@@ -6275,10 +6290,9 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 					/* TODO Hoosterman we have a problem! */
+ 					T(YAFFS_TRACE_ERROR,
+ 					  (TSTR
+-					   ("yaffs tragedy: Could not make object for object  %d  "
+-					    "at chunk %d during scan"
++					   ("yaffs tragedy: Could not make object for object  %d at chunk %d during scan"
+ 					    TENDSTR), tags.objectId, chunk));
+-
++					continue;
+ 				}
+ 
+ 				if (in->valid) {
+@@ -6289,10 +6303,9 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 					if ((in->variantType == YAFFS_OBJECT_TYPE_FILE) &&
+ 					     ((oh &&
+-					       oh-> type == YAFFS_OBJECT_TYPE_FILE)||
++					       oh->type == YAFFS_OBJECT_TYPE_FILE) ||
+ 					      (tags.extraHeaderInfoAvailable  &&
+-					       tags.extraObjectType == YAFFS_OBJECT_TYPE_FILE))
+-					    ) {
++					       tags.extraObjectType == YAFFS_OBJECT_TYPE_FILE))) {
+ 						__u32 thisSize =
+ 						    (oh) ? oh->fileSize : tags.
+ 						    extraFileLength;
+@@ -6300,7 +6313,9 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 						    (oh) ? oh->
+ 						    parentObjectId : tags.
+ 						    extraParentObjectId;
+-						unsigned isShrink =
++
++
++						isShrink =
+ 						    (oh) ? oh->isShrink : tags.
+ 						    extraIsShrinkHeader;
+ 
+@@ -6323,9 +6338,8 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 							    thisSize;
+ 						}
+ 
+-						if (isShrink) {
++						if (isShrink)
+ 							bi->hasShrinkHeader = 1;
+-						}
+ 
+ 					}
+ 					/* Use existing - destroy this one. */
+@@ -6333,6 +6347,17 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 				}
+ 
++				if (!in->valid && in->variantType !=
++				    (oh ? oh->type : tags.extraObjectType))
++					T(YAFFS_TRACE_ERROR, (
++						TSTR("yaffs tragedy: Bad object type, "
++					    TCONT("%d != %d, for object %d at chunk ")
++					    TCONT("%d during scan")
++						TENDSTR), oh ?
++					    oh->type : tags.extraObjectType,
++					    in->variantType, tags.objectId,
++					    chunk));
++
+ 				if (!in->valid &&
+ 				    (tags.objectId == YAFFS_OBJECTID_ROOT ||
+ 				     tags.objectId ==
+@@ -6340,7 +6365,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 					/* We only load some info, don't fiddle with directory structure */
+ 					in->valid = 1;
+ 
+-					if(oh) {
++					if (oh) {
+ 						in->variantType = oh->type;
+ 
+ 						in->yst_mode = oh->yst_mode;
+@@ -6365,15 +6390,15 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 						in->lazyLoaded = 1;
+ 					}
+ 
+-					in->chunkId = chunk;
++					in->hdrChunk = chunk;
+ 
+ 				} else if (!in->valid) {
+ 					/* we need to load this info */
+ 
+ 					in->valid = 1;
+-					in->chunkId = chunk;
++					in->hdrChunk = chunk;
+ 
+-					if(oh) {
++					if (oh) {
+ 						in->variantType = oh->type;
+ 
+ 						in->yst_mode = oh->yst_mode;
+@@ -6403,20 +6428,19 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 						yaffs_SetObjectName(in, oh->name);
+ 						parent =
+ 						    yaffs_FindOrCreateObjectByNumber
+-					    		(dev, oh->parentObjectId,
+-					     		 YAFFS_OBJECT_TYPE_DIRECTORY);
++							(dev, oh->parentObjectId,
++							 YAFFS_OBJECT_TYPE_DIRECTORY);
+ 
+ 						 fileSize = oh->fileSize;
+- 						 isShrink = oh->isShrink;
++						 isShrink = oh->isShrink;
+ 						 equivalentObjectId = oh->equivalentObjectId;
+ 
+-					}
+-					else {
++					} else {
+ 						in->variantType = tags.extraObjectType;
+ 						parent =
+ 						    yaffs_FindOrCreateObjectByNumber
+-					    		(dev, tags.extraParentObjectId,
+-					     		 YAFFS_OBJECT_TYPE_DIRECTORY);
++							(dev, tags.extraParentObjectId,
++							 YAFFS_OBJECT_TYPE_DIRECTORY);
+ 						 fileSize = tags.extraFileLength;
+ 						 isShrink = tags.extraIsShrinkHeader;
+ 						 equivalentObjectId = tags.extraEquivalentObjectId;
+@@ -6425,29 +6449,30 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 					}
+ 					in->dirty = 0;
+ 
++					if (!parent)
++						alloc_failed = 1;
++
+ 					/* directory stuff...
+ 					 * hook up to parent
+ 					 */
+ 
+-					if (parent->variantType ==
++					if (parent && parent->variantType ==
+ 					    YAFFS_OBJECT_TYPE_UNKNOWN) {
+ 						/* Set up as a directory */
+ 						parent->variantType =
+-						    YAFFS_OBJECT_TYPE_DIRECTORY;
+-						INIT_LIST_HEAD(&parent->variant.
+-							       directoryVariant.
+-							       children);
+-					} else if (parent->variantType !=
+-						   YAFFS_OBJECT_TYPE_DIRECTORY)
+-					{
++							YAFFS_OBJECT_TYPE_DIRECTORY;
++						YINIT_LIST_HEAD(&parent->variant.
++							directoryVariant.
++							children);
++					} else if (!parent || parent->variantType !=
++						   YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 						/* Hoosterman, another problem....
+ 						 * We're trying to use a non-directory as a directory
+ 						 */
+ 
+ 						T(YAFFS_TRACE_ERROR,
+ 						  (TSTR
+-						   ("yaffs tragedy: attempting to use non-directory as"
+-						    " a directory in scan. Put in lost+found."
++						   ("yaffs tragedy: attempting to use non-directory as a directory in scan. Put in lost+found."
+ 						    TENDSTR)));
+ 						parent = dev->lostNFoundDir;
+ 					}
+@@ -6494,12 +6519,12 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_HARDLINK:
+-						if(!itsUnlinked) {
+-						  in->variant.hardLinkVariant.equivalentObjectId =
+-						    equivalentObjectId;
+-						  in->hardLinks.next =
+-						    (struct list_head *) hardList;
+-						  hardList = in;
++						if (!itsUnlinked) {
++							in->variant.hardLinkVariant.equivalentObjectId =
++								equivalentObjectId;
++							in->hardLinks.next =
++								(struct ylist_head *) hardList;
++							hardList = in;
+ 						}
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_DIRECTORY:
+@@ -6509,12 +6534,11 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 						/* Do nothing */
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_SYMLINK:
+-						if(oh){
+-						   in->variant.symLinkVariant.alias =
+-						    yaffs_CloneString(oh->
+-								      alias);
+-						   if(!in->variant.symLinkVariant.alias)
+-						   	alloc_failed = 1;
++						if (oh) {
++							in->variant.symLinkVariant.alias =
++								yaffs_CloneString(oh->alias);
++							if (!in->variant.symLinkVariant.alias)
++								alloc_failed = 1;
+ 						}
+ 						break;
+ 					}
+@@ -6551,75 +6575,129 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 	 * We should now have scanned all the objects, now it's time to add these
+ 	 * hardlinks.
+ 	 */
+-	yaffs_HardlinkFixup(dev,hardList);
++	yaffs_HardlinkFixup(dev, hardList);
+ 
+ 
+-	/*
+-	*  Sort out state of unlinked and deleted objects.
+-	*/
+-	{
+-		struct list_head *i;
+-		struct list_head *n;
++	yaffs_ReleaseTempBuffer(dev, chunkData, __LINE__);
+ 
+-		yaffs_Object *l;
++	if (alloc_failed)
++		return YAFFS_FAIL;
+ 
+-		/* Soft delete all the unlinked files */
+-		list_for_each_safe(i, n,
+-				   &dev->unlinkedDir->variant.directoryVariant.
+-				   children) {
+-			if (i) {
+-				l = list_entry(i, yaffs_Object, siblings);
+-				yaffs_DestroyObject(l);
+-			}
+-		}
++	T(YAFFS_TRACE_SCAN, (TSTR("yaffs_ScanBackwards ends" TENDSTR)));
+ 
+-		/* Soft delete all the deletedDir files */
+-		list_for_each_safe(i, n,
+-				   &dev->deletedDir->variant.directoryVariant.
+-				   children) {
+-			if (i) {
+-				l = list_entry(i, yaffs_Object, siblings);
+-				yaffs_DestroyObject(l);
++	return YAFFS_OK;
++}
+ 
+-			}
++/*------------------------------  Directory Functions ----------------------------- */
++
++static void yaffs_VerifyObjectInDirectory(yaffs_Object *obj)
++{
++	struct ylist_head *lh;
++	yaffs_Object *listObj;
++
++	int count = 0;
++
++	if (!obj) {
++		T(YAFFS_TRACE_ALWAYS, (TSTR("No object to verify" TENDSTR)));
++		YBUG();
++		return;
++	}
++
++	if (yaffs_SkipVerification(obj->myDev))
++		return;
++
++	if (!obj->parent) {
++		T(YAFFS_TRACE_ALWAYS, (TSTR("Object does not have parent" TENDSTR)));
++		YBUG();
++		return;
++	}
++
++	if (obj->parent->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
++		T(YAFFS_TRACE_ALWAYS, (TSTR("Parent is not directory" TENDSTR)));
++		YBUG();
++	}
++
++	/* Iterate through the objects in each hash entry */
++
++	ylist_for_each(lh, &obj->parent->variant.directoryVariant.children) {
++		if (lh) {
++			listObj = ylist_entry(lh, yaffs_Object, siblings);
++			yaffs_VerifyObject(listObj);
++			if (obj == listObj)
++				count++;
+ 		}
++	 }
++
++	if (count != 1) {
++		T(YAFFS_TRACE_ALWAYS, (TSTR("Object in directory %d times" TENDSTR), count));
++		YBUG();
+ 	}
++}
+ 
+-	yaffs_ReleaseTempBuffer(dev, chunkData, __LINE__);
++static void yaffs_VerifyDirectory(yaffs_Object *directory)
++{
++	struct ylist_head *lh;
++	yaffs_Object *listObj;
+ 
+-	if(alloc_failed){
+-		return YAFFS_FAIL;
++	if (!directory) {
++		YBUG();
++		return;
+ 	}
+ 
+-	T(YAFFS_TRACE_SCAN, (TSTR("yaffs_ScanBackwards ends" TENDSTR)));
++	if (yaffs_SkipFullVerification(directory->myDev))
++		return;
+ 
+-	return YAFFS_OK;
++	if (directory->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
++		T(YAFFS_TRACE_ALWAYS, (TSTR("Directory has wrong type: %d" TENDSTR), directory->variantType));
++		YBUG();
++	}
++
++	/* Iterate through the objects in each hash entry */
++
++	ylist_for_each(lh, &directory->variant.directoryVariant.children) {
++		if (lh) {
++			listObj = ylist_entry(lh, yaffs_Object, siblings);
++			if (listObj->parent != directory) {
++				T(YAFFS_TRACE_ALWAYS, (TSTR("Object in directory list has wrong parent %p" TENDSTR), listObj->parent));
++				YBUG();
++			}
++			yaffs_VerifyObjectInDirectory(listObj);
++		}
++	}
+ }
+ 
+-/*------------------------------  Directory Functions ----------------------------- */
+ 
+-static void yaffs_RemoveObjectFromDirectory(yaffs_Object * obj)
++static void yaffs_RemoveObjectFromDirectory(yaffs_Object *obj)
+ {
+ 	yaffs_Device *dev = obj->myDev;
++	yaffs_Object *parent;
++
++	yaffs_VerifyObjectInDirectory(obj);
++	parent = obj->parent;
++
++	yaffs_VerifyDirectory(parent);
+ 
+-	if(dev && dev->removeObjectCallback)
++	if (dev && dev->removeObjectCallback)
+ 		dev->removeObjectCallback(obj);
+ 
+-	list_del_init(&obj->siblings);
++
++	ylist_del_init(&obj->siblings);
+ 	obj->parent = NULL;
++
++	yaffs_VerifyDirectory(parent);
+ }
+ 
+ 
+-static void yaffs_AddObjectToDirectory(yaffs_Object * directory,
+-				       yaffs_Object * obj)
++static void yaffs_AddObjectToDirectory(yaffs_Object *directory,
++					yaffs_Object *obj)
+ {
+-
+ 	if (!directory) {
+ 		T(YAFFS_TRACE_ALWAYS,
+ 		  (TSTR
+ 		   ("tragedy: Trying to add an object to a null pointer directory"
+ 		    TENDSTR)));
+ 		YBUG();
++		return;
+ 	}
+ 	if (directory->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 		T(YAFFS_TRACE_ALWAYS,
+@@ -6631,37 +6709,42 @@ static void yaffs_AddObjectToDirectory(y
+ 
+ 	if (obj->siblings.prev == NULL) {
+ 		/* Not initialised */
+-		INIT_LIST_HEAD(&obj->siblings);
+-
+-	} else if (!list_empty(&obj->siblings)) {
+-		/* If it is holed up somewhere else, un hook it */
+-		yaffs_RemoveObjectFromDirectory(obj);
++		YBUG();
+ 	}
++
++
++	yaffs_VerifyDirectory(directory);
++
++	yaffs_RemoveObjectFromDirectory(obj);
++
++
+ 	/* Now add it */
+-	list_add(&obj->siblings, &directory->variant.directoryVariant.children);
++	ylist_add(&obj->siblings, &directory->variant.directoryVariant.children);
+ 	obj->parent = directory;
+ 
+ 	if (directory == obj->myDev->unlinkedDir
+-	    || directory == obj->myDev->deletedDir) {
++			|| directory == obj->myDev->deletedDir) {
+ 		obj->unlinked = 1;
+ 		obj->myDev->nUnlinkedFiles++;
+ 		obj->renameAllowed = 0;
+ 	}
++
++	yaffs_VerifyDirectory(directory);
++	yaffs_VerifyObjectInDirectory(obj);
+ }
+ 
+-yaffs_Object *yaffs_FindObjectByName(yaffs_Object * directory,
+-				     const YCHAR * name)
++yaffs_Object *yaffs_FindObjectByName(yaffs_Object *directory,
++				     const YCHAR *name)
+ {
+ 	int sum;
+ 
+-	struct list_head *i;
++	struct ylist_head *i;
+ 	YCHAR buffer[YAFFS_MAX_NAME_LENGTH + 1];
+ 
+ 	yaffs_Object *l;
+ 
+-	if (!name) {
++	if (!name)
+ 		return NULL;
+-	}
+ 
+ 	if (!directory) {
+ 		T(YAFFS_TRACE_ALWAYS,
+@@ -6669,6 +6752,7 @@ yaffs_Object *yaffs_FindObjectByName(yaf
+ 		   ("tragedy: yaffs_FindObjectByName: null pointer directory"
+ 		    TENDSTR)));
+ 		YBUG();
++		return NULL;
+ 	}
+ 	if (directory->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 		T(YAFFS_TRACE_ALWAYS,
+@@ -6679,28 +6763,27 @@ yaffs_Object *yaffs_FindObjectByName(yaf
+ 
+ 	sum = yaffs_CalcNameSum(name);
+ 
+-	list_for_each(i, &directory->variant.directoryVariant.children) {
++	ylist_for_each(i, &directory->variant.directoryVariant.children) {
+ 		if (i) {
+-			l = list_entry(i, yaffs_Object, siblings);
++			l = ylist_entry(i, yaffs_Object, siblings);
++
++			if (l->parent != directory)
++				YBUG();
+ 
+ 			yaffs_CheckObjectDetailsLoaded(l);
+ 
+ 			/* Special case for lost-n-found */
+ 			if (l->objectId == YAFFS_OBJECTID_LOSTNFOUND) {
+-				if (yaffs_strcmp(name, YAFFS_LOSTNFOUND_NAME) == 0) {
++				if (yaffs_strcmp(name, YAFFS_LOSTNFOUND_NAME) == 0)
+ 					return l;
+-				}
+-			} else if (yaffs_SumCompare(l->sum, sum) || l->chunkId <= 0)
+-			{
+-				/* LostnFound cunk called Objxxx
++			} else if (yaffs_SumCompare(l->sum, sum) || l->hdrChunk <= 0) {
++				/* LostnFound chunk called Objxxx
+ 				 * Do a real check
+ 				 */
+ 				yaffs_GetObjectName(l, buffer,
+ 						    YAFFS_MAX_NAME_LENGTH);
+-				if (yaffs_strncmp(name, buffer,YAFFS_MAX_NAME_LENGTH) == 0) {
++				if (yaffs_strncmp(name, buffer, YAFFS_MAX_NAME_LENGTH) == 0)
+ 					return l;
+-				}
+-
+ 			}
+ 		}
+ 	}
+@@ -6710,10 +6793,10 @@ yaffs_Object *yaffs_FindObjectByName(yaf
+ 
+ 
+ #if 0
+-int yaffs_ApplyToDirectoryChildren(yaffs_Object * theDir,
+-				   int (*fn) (yaffs_Object *))
++int yaffs_ApplyToDirectoryChildren(yaffs_Object *theDir,
++					int (*fn) (yaffs_Object *))
+ {
+-	struct list_head *i;
++	struct ylist_head *i;
+ 	yaffs_Object *l;
+ 
+ 	if (!theDir) {
+@@ -6722,20 +6805,21 @@ int yaffs_ApplyToDirectoryChildren(yaffs
+ 		   ("tragedy: yaffs_FindObjectByName: null pointer directory"
+ 		    TENDSTR)));
+ 		YBUG();
++		return YAFFS_FAIL;
+ 	}
+ 	if (theDir->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 		T(YAFFS_TRACE_ALWAYS,
+ 		  (TSTR
+ 		   ("tragedy: yaffs_FindObjectByName: non-directory" TENDSTR)));
+ 		YBUG();
++		return YAFFS_FAIL;
+ 	}
+ 
+-	list_for_each(i, &theDir->variant.directoryVariant.children) {
++	ylist_for_each(i, &theDir->variant.directoryVariant.children) {
+ 		if (i) {
+-			l = list_entry(i, yaffs_Object, siblings);
+-			if (l && !fn(l)) {
++			l = ylist_entry(i, yaffs_Object, siblings);
++			if (l && !fn(l))
+ 				return YAFFS_FAIL;
+-			}
+ 		}
+ 	}
+ 
+@@ -6748,7 +6832,7 @@ int yaffs_ApplyToDirectoryChildren(yaffs
+  * actual object.
+  */
+ 
+-yaffs_Object *yaffs_GetEquivalentObject(yaffs_Object * obj)
++yaffs_Object *yaffs_GetEquivalentObject(yaffs_Object *obj)
+ {
+ 	if (obj && obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) {
+ 		/* We want the object id of the equivalent object, not this one */
+@@ -6756,10 +6840,9 @@ yaffs_Object *yaffs_GetEquivalentObject(
+ 		yaffs_CheckObjectDetailsLoaded(obj);
+ 	}
+ 	return obj;
+-
+ }
+ 
+-int yaffs_GetObjectName(yaffs_Object * obj, YCHAR * name, int buffSize)
++int yaffs_GetObjectName(yaffs_Object *obj, YCHAR *name, int buffSize)
+ {
+ 	memset(name, 0, buffSize * sizeof(YCHAR));
+ 
+@@ -6767,18 +6850,26 @@ int yaffs_GetObjectName(yaffs_Object * o
+ 
+ 	if (obj->objectId == YAFFS_OBJECTID_LOSTNFOUND) {
+ 		yaffs_strncpy(name, YAFFS_LOSTNFOUND_NAME, buffSize - 1);
+-	} else if (obj->chunkId <= 0) {
++	} else if (obj->hdrChunk <= 0) {
+ 		YCHAR locName[20];
++		YCHAR numString[20];
++		YCHAR *x = &numString[19];
++		unsigned v = obj->objectId;
++		numString[19] = 0;
++		while (v > 0) {
++			x--;
++			*x = '0' + (v % 10);
++			v /= 10;
++		}
+ 		/* make up a name */
+-		yaffs_sprintf(locName, _Y("%s%d"), YAFFS_LOSTNFOUND_PREFIX,
+-			      obj->objectId);
++		yaffs_strcpy(locName, YAFFS_LOSTNFOUND_PREFIX);
++		yaffs_strcat(locName, x);
+ 		yaffs_strncpy(name, locName, buffSize - 1);
+ 
+ 	}
+ #ifdef CONFIG_YAFFS_SHORT_NAMES_IN_RAM
+-	else if (obj->shortName[0]) {
++	else if (obj->shortName[0])
+ 		yaffs_strcpy(name, obj->shortName);
+-	}
+ #endif
+ 	else {
+ 		int result;
+@@ -6788,9 +6879,9 @@ int yaffs_GetObjectName(yaffs_Object * o
+ 
+ 		memset(buffer, 0, obj->myDev->nDataBytesPerChunk);
+ 
+-		if (obj->chunkId >= 0) {
++		if (obj->hdrChunk > 0) {
+ 			result = yaffs_ReadChunkWithTagsFromNAND(obj->myDev,
+-							obj->chunkId, buffer,
++							obj->hdrChunk, buffer,
+ 							NULL);
+ 		}
+ 		yaffs_strncpy(name, oh->name, buffSize - 1);
+@@ -6801,46 +6892,43 @@ int yaffs_GetObjectName(yaffs_Object * o
+ 	return yaffs_strlen(name);
+ }
+ 
+-int yaffs_GetObjectFileLength(yaffs_Object * obj)
++int yaffs_GetObjectFileLength(yaffs_Object *obj)
+ {
+-
+ 	/* Dereference any hard linking */
+ 	obj = yaffs_GetEquivalentObject(obj);
+ 
+-	if (obj->variantType == YAFFS_OBJECT_TYPE_FILE) {
++	if (obj->variantType == YAFFS_OBJECT_TYPE_FILE)
+ 		return obj->variant.fileVariant.fileSize;
+-	}
+-	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK) {
++	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK)
+ 		return yaffs_strlen(obj->variant.symLinkVariant.alias);
+-	} else {
++	else {
+ 		/* Only a directory should drop through to here */
+ 		return obj->myDev->nDataBytesPerChunk;
+ 	}
+ }
+ 
+-int yaffs_GetObjectLinkCount(yaffs_Object * obj)
++int yaffs_GetObjectLinkCount(yaffs_Object *obj)
+ {
+ 	int count = 0;
+-	struct list_head *i;
++	struct ylist_head *i;
+ 
+-	if (!obj->unlinked) {
+-		count++;	/* the object itself */
+-	}
+-	list_for_each(i, &obj->hardLinks) {
+-		count++;	/* add the hard links; */
+-	}
+-	return count;
++	if (!obj->unlinked)
++		count++;		/* the object itself */
++
++	ylist_for_each(i, &obj->hardLinks)
++		count++;		/* add the hard links; */
+ 
++	return count;
+ }
+ 
+-int yaffs_GetObjectInode(yaffs_Object * obj)
++int yaffs_GetObjectInode(yaffs_Object *obj)
+ {
+ 	obj = yaffs_GetEquivalentObject(obj);
+ 
+ 	return obj->objectId;
+ }
+ 
+-unsigned yaffs_GetObjectType(yaffs_Object * obj)
++unsigned yaffs_GetObjectType(yaffs_Object *obj)
+ {
+ 	obj = yaffs_GetEquivalentObject(obj);
+ 
+@@ -6872,19 +6960,18 @@ unsigned yaffs_GetObjectType(yaffs_Objec
+ 	}
+ }
+ 
+-YCHAR *yaffs_GetSymlinkAlias(yaffs_Object * obj)
++YCHAR *yaffs_GetSymlinkAlias(yaffs_Object *obj)
+ {
+ 	obj = yaffs_GetEquivalentObject(obj);
+-	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK) {
++	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK)
+ 		return yaffs_CloneString(obj->variant.symLinkVariant.alias);
+-	} else {
++	else
+ 		return yaffs_CloneString(_Y(""));
+-	}
+ }
+ 
+ #ifndef CONFIG_YAFFS_WINCE
+ 
+-int yaffs_SetAttributes(yaffs_Object * obj, struct iattr *attr)
++int yaffs_SetAttributes(yaffs_Object *obj, struct iattr *attr)
+ {
+ 	unsigned int valid = attr->ia_valid;
+ 
+@@ -6910,7 +6997,7 @@ int yaffs_SetAttributes(yaffs_Object * o
+ 	return YAFFS_OK;
+ 
+ }
+-int yaffs_GetAttributes(yaffs_Object * obj, struct iattr *attr)
++int yaffs_GetAttributes(yaffs_Object *obj, struct iattr *attr)
+ {
+ 	unsigned int valid = 0;
+ 
+@@ -6934,13 +7021,12 @@ int yaffs_GetAttributes(yaffs_Object * o
+ 	attr->ia_valid = valid;
+ 
+ 	return YAFFS_OK;
+-
+ }
+ 
+ #endif
+ 
+ #if 0
+-int yaffs_DumpObject(yaffs_Object * obj)
++int yaffs_DumpObject(yaffs_Object *obj)
+ {
+ 	YCHAR name[257];
+ 
+@@ -6951,7 +7037,7 @@ int yaffs_DumpObject(yaffs_Object * obj)
+ 	   ("Object %d, inode %d \"%s\"\n dirty %d valid %d serial %d sum %d"
+ 	    " chunk %d type %d size %d\n"
+ 	    TENDSTR), obj->objectId, yaffs_GetObjectInode(obj), name,
+-	   obj->dirty, obj->valid, obj->serial, obj->sum, obj->chunkId,
++	   obj->dirty, obj->valid, obj->serial, obj->sum, obj->hdrChunk,
+ 	   yaffs_GetObjectType(obj), yaffs_GetObjectFileLength(obj)));
+ 
+ 	return YAFFS_OK;
+@@ -6960,7 +7046,7 @@ int yaffs_DumpObject(yaffs_Object * obj)
+ 
+ /*---------------------------- Initialisation code -------------------------------------- */
+ 
+-static int yaffs_CheckDevFunctions(const yaffs_Device * dev)
++static int yaffs_CheckDevFunctions(const yaffs_Device *dev)
+ {
+ 
+ 	/* Common functions, gotta have */
+@@ -7011,7 +7097,7 @@ static int yaffs_CreateInitialDirectorie
+ 	    yaffs_CreateFakeDirectory(dev, YAFFS_OBJECTID_LOSTNFOUND,
+ 				      YAFFS_LOSTNFOUND_MODE | S_IFDIR);
+ 
+-	if(dev->lostNFoundDir && dev->rootDir && dev->unlinkedDir && dev->deletedDir){
++	if (dev->lostNFoundDir && dev->rootDir && dev->unlinkedDir && dev->deletedDir) {
+ 		yaffs_AddObjectToDirectory(dev->rootDir, dev->lostNFoundDir);
+ 		return YAFFS_OK;
+ 	}
+@@ -7019,7 +7105,7 @@ static int yaffs_CreateInitialDirectorie
+ 	return YAFFS_FAIL;
+ }
+ 
+-int yaffs_GutsInitialise(yaffs_Device * dev)
++int yaffs_GutsInitialise(yaffs_Device *dev)
+ {
+ 	int init_failed = 0;
+ 	unsigned x;
+@@ -7040,6 +7126,8 @@ int yaffs_GutsInitialise(yaffs_Device *
+ 	dev->chunkOffset = 0;
+ 	dev->nFreeChunks = 0;
+ 
++	dev->gcBlock = -1;
++
+ 	if (dev->startBlock == 0) {
+ 		dev->internalStartBlock = dev->startBlock + 1;
+ 		dev->internalEndBlock = dev->endBlock + 1;
+@@ -7049,18 +7137,18 @@ int yaffs_GutsInitialise(yaffs_Device *
+ 
+ 	/* Check geometry parameters. */
+ 
+-	if ((dev->isYaffs2 && dev->nDataBytesPerChunk < 1024) ||
+-	    (!dev->isYaffs2 && dev->nDataBytesPerChunk != 512) ||
++	if ((!dev->inbandTags && dev->isYaffs2 && dev->totalBytesPerChunk < 1024) ||
++	    (!dev->isYaffs2 && dev->totalBytesPerChunk < 512) ||
++	    (dev->inbandTags && !dev->isYaffs2) ||
+ 	     dev->nChunksPerBlock < 2 ||
+ 	     dev->nReservedBlocks < 2 ||
+ 	     dev->internalStartBlock <= 0 ||
+ 	     dev->internalEndBlock <= 0 ||
+-	     dev->internalEndBlock <= (dev->internalStartBlock + dev->nReservedBlocks + 2)	// otherwise it is too small
+-	    ) {
++	     dev->internalEndBlock <= (dev->internalStartBlock + dev->nReservedBlocks + 2)) {	/* otherwise it is too small */
+ 		T(YAFFS_TRACE_ALWAYS,
+ 		  (TSTR
+-		   ("yaffs: NAND geometry problems: chunk size %d, type is yaffs%s "
+-		    TENDSTR), dev->nDataBytesPerChunk, dev->isYaffs2 ? "2" : ""));
++		   ("yaffs: NAND geometry problems: chunk size %d, type is yaffs%s, inbandTags %d "
++		    TENDSTR), dev->totalBytesPerChunk, dev->isYaffs2 ? "2" : "", dev->inbandTags));
+ 		return YAFFS_FAIL;
+ 	}
+ 
+@@ -7070,6 +7158,12 @@ int yaffs_GutsInitialise(yaffs_Device *
+ 		return YAFFS_FAIL;
+ 	}
+ 
++	/* Sort out space for inband tags, if required */
++	if (dev->inbandTags)
++		dev->nDataBytesPerChunk = dev->totalBytesPerChunk - sizeof(yaffs_PackedTags2TagsPart);
++	else
++		dev->nDataBytesPerChunk = dev->totalBytesPerChunk;
++
+ 	/* Got the right mix of functions? */
+ 	if (!yaffs_CheckDevFunctions(dev)) {
+ 		/* Function missing */
+@@ -7097,31 +7191,18 @@ int yaffs_GutsInitialise(yaffs_Device *
+ 
+ 	dev->isMounted = 1;
+ 
+-
+-
+ 	/* OK now calculate a few things for the device */
+ 
+ 	/*
+ 	 *  Calculate all the chunk size manipulation numbers:
+ 	 */
+-	 /* Start off assuming it is a power of 2 */
+-	 dev->chunkShift = ShiftDiv(dev->nDataBytesPerChunk);
+-	 dev->chunkMask = (1<<dev->chunkShift) - 1;
+-
+-	 if(dev->nDataBytesPerChunk == (dev->chunkMask + 1)){
+-	 	/* Yes it is a power of 2, disable crumbs */
+-		dev->crumbMask = 0;
+-		dev->crumbShift = 0;
+-		dev->crumbsPerChunk = 0;
+-	 } else {
+-	 	/* Not a power of 2, use crumbs instead */
+-		dev->crumbShift = ShiftDiv(sizeof(yaffs_PackedTags2TagsPart));
+-		dev->crumbMask = (1<<dev->crumbShift)-1;
+-		dev->crumbsPerChunk = dev->nDataBytesPerChunk/(1 << dev->crumbShift);
+-		dev->chunkShift = 0;
+-		dev->chunkMask = 0;
+-	}
+-
++	x = dev->nDataBytesPerChunk;
++	/* We always use dev->chunkShift and dev->chunkDiv */
++	dev->chunkShift = Shifts(x);
++	x >>= dev->chunkShift;
++	dev->chunkDiv = x;
++	/* We only use chunk mask if chunkDiv is 1 */
++	dev->chunkMask = (1<<dev->chunkShift) - 1;
+ 
+ 	/*
+ 	 * Calculate chunkGroupBits.
+@@ -7133,16 +7214,15 @@ int yaffs_GutsInitialise(yaffs_Device *
+ 	bits = ShiftsGE(x);
+ 
+ 	/* Set up tnode width if wide tnodes are enabled. */
+-	if(!dev->wideTnodesDisabled){
++	if (!dev->wideTnodesDisabled) {
+ 		/* bits must be even so that we end up with 32-bit words */
+-		if(bits & 1)
++		if (bits & 1)
+ 			bits++;
+-		if(bits < 16)
++		if (bits < 16)
+ 			dev->tnodeWidth = 16;
+ 		else
+ 			dev->tnodeWidth = bits;
+-	}
+-	else
++	} else
+ 		dev->tnodeWidth = 16;
+ 
+ 	dev->tnodeMask = (1<<dev->tnodeWidth)-1;
+@@ -7193,7 +7273,7 @@ int yaffs_GutsInitialise(yaffs_Device *
+ 	dev->hasPendingPrioritisedGCs = 1; /* Assume the worst for now, will get fixed on first GC */
+ 
+ 	/* Initialise temporary buffers and caches. */
+-	if(!yaffs_InitialiseTempBuffers(dev))
++	if (!yaffs_InitialiseTempBuffers(dev))
+ 		init_failed = 1;
+ 
+ 	dev->srCache = NULL;
+@@ -7203,25 +7283,26 @@ int yaffs_GutsInitialise(yaffs_Device *
+ 	if (!init_failed &&
+ 	    dev->nShortOpCaches > 0) {
+ 		int i;
+-		__u8 *buf;
++		void *buf;
+ 		int srCacheBytes = dev->nShortOpCaches * sizeof(yaffs_ChunkCache);
+ 
+-		if (dev->nShortOpCaches > YAFFS_MAX_SHORT_OP_CACHES) {
++		if (dev->nShortOpCaches > YAFFS_MAX_SHORT_OP_CACHES)
+ 			dev->nShortOpCaches = YAFFS_MAX_SHORT_OP_CACHES;
+-		}
+ 
+-		buf = dev->srCache =  YMALLOC(srCacheBytes);
++		dev->srCache =  YMALLOC(srCacheBytes);
+ 
+-		if(dev->srCache)
+-			memset(dev->srCache,0,srCacheBytes);
++		buf = (__u8 *) dev->srCache;
++
++		if (dev->srCache)
++			memset(dev->srCache, 0, srCacheBytes);
+ 
+ 		for (i = 0; i < dev->nShortOpCaches && buf; i++) {
+ 			dev->srCache[i].object = NULL;
+ 			dev->srCache[i].lastUse = 0;
+ 			dev->srCache[i].dirty = 0;
+-			dev->srCache[i].data = buf = YMALLOC_DMA(dev->nDataBytesPerChunk);
++			dev->srCache[i].data = buf = YMALLOC_DMA(dev->totalBytesPerChunk);
+ 		}
+-		if(!buf)
++		if (!buf)
+ 			init_failed = 1;
+ 
+ 		dev->srLastUse = 0;
+@@ -7229,29 +7310,30 @@ int yaffs_GutsInitialise(yaffs_Device *
+ 
+ 	dev->cacheHits = 0;
+ 
+-	if(!init_failed){
++	if (!init_failed) {
+ 		dev->gcCleanupList = YMALLOC(dev->nChunksPerBlock * sizeof(__u32));
+-		if(!dev->gcCleanupList)
++		if (!dev->gcCleanupList)
+ 			init_failed = 1;
+ 	}
+ 
+-	if (dev->isYaffs2) {
++	if (dev->isYaffs2)
+ 		dev->useHeaderFileSize = 1;
+-	}
+-	if(!init_failed && !yaffs_InitialiseBlocks(dev))
++
++	if (!init_failed && !yaffs_InitialiseBlocks(dev))
+ 		init_failed = 1;
+ 
+ 	yaffs_InitialiseTnodes(dev);
+ 	yaffs_InitialiseObjects(dev);
+ 
+-	if(!init_failed && !yaffs_CreateInitialDirectories(dev))
++	if (!init_failed && !yaffs_CreateInitialDirectories(dev))
+ 		init_failed = 1;
+ 
+ 
+-	if(!init_failed){
++	if (!init_failed) {
+ 		/* Now scan the flash. */
+ 		if (dev->isYaffs2) {
+-			if(yaffs_CheckpointRestore(dev)) {
++			if (yaffs_CheckpointRestore(dev)) {
++				yaffs_CheckObjectDetailsLoaded(dev->rootDir);
+ 				T(YAFFS_TRACE_ALWAYS,
+ 				  (TSTR("yaffs: restored from checkpoint" TENDSTR)));
+ 			} else {
+@@ -7273,24 +7355,25 @@ int yaffs_GutsInitialise(yaffs_Device *
+ 				dev->nBackgroundDeletions = 0;
+ 				dev->oldestDirtySequence = 0;
+ 
+-				if(!init_failed && !yaffs_InitialiseBlocks(dev))
++				if (!init_failed && !yaffs_InitialiseBlocks(dev))
+ 					init_failed = 1;
+ 
+ 				yaffs_InitialiseTnodes(dev);
+ 				yaffs_InitialiseObjects(dev);
+ 
+-				if(!init_failed && !yaffs_CreateInitialDirectories(dev))
++				if (!init_failed && !yaffs_CreateInitialDirectories(dev))
+ 					init_failed = 1;
+ 
+-				if(!init_failed && !yaffs_ScanBackwards(dev))
++				if (!init_failed && !yaffs_ScanBackwards(dev))
+ 					init_failed = 1;
+ 			}
+-		}else
+-			if(!yaffs_Scan(dev))
++		} else if (!yaffs_Scan(dev))
+ 				init_failed = 1;
++
++		yaffs_StripDeletedObjects(dev);
+ 	}
+ 
+-	if(init_failed){
++	if (init_failed) {
+ 		/* Clean up the mess */
+ 		T(YAFFS_TRACE_TRACING,
+ 		  (TSTR("yaffs: yaffs_GutsInitialise() aborted.\n" TENDSTR)));
+@@ -7318,7 +7401,7 @@ int yaffs_GutsInitialise(yaffs_Device *
+ 
+ }
+ 
+-void yaffs_Deinitialise(yaffs_Device * dev)
++void yaffs_Deinitialise(yaffs_Device *dev)
+ {
+ 	if (dev->isMounted) {
+ 		int i;
+@@ -7330,7 +7413,7 @@ void yaffs_Deinitialise(yaffs_Device * d
+ 		    dev->srCache) {
+ 
+ 			for (i = 0; i < dev->nShortOpCaches; i++) {
+-				if(dev->srCache[i].data)
++				if (dev->srCache[i].data)
+ 					YFREE(dev->srCache[i].data);
+ 				dev->srCache[i].data = NULL;
+ 			}
+@@ -7341,16 +7424,17 @@ void yaffs_Deinitialise(yaffs_Device * d
+ 
+ 		YFREE(dev->gcCleanupList);
+ 
+-		for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
++		for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++)
+ 			YFREE(dev->tempBuffer[i].buffer);
+-		}
+ 
+ 		dev->isMounted = 0;
+-	}
+ 
++		if (dev->deinitialiseNAND)
++			dev->deinitialiseNAND(dev);
++	}
+ }
+ 
+-static int yaffs_CountFreeChunks(yaffs_Device * dev)
++static int yaffs_CountFreeChunks(yaffs_Device *dev)
+ {
+ 	int nFree;
+ 	int b;
+@@ -7358,7 +7442,7 @@ static int yaffs_CountFreeChunks(yaffs_D
+ 	yaffs_BlockInfo *blk;
+ 
+ 	for (nFree = 0, b = dev->internalStartBlock; b <= dev->internalEndBlock;
+-	     b++) {
++			b++) {
+ 		blk = yaffs_GetBlockInfo(dev, b);
+ 
+ 		switch (blk->blockState) {
+@@ -7373,19 +7457,19 @@ static int yaffs_CountFreeChunks(yaffs_D
+ 		default:
+ 			break;
+ 		}
+-
+ 	}
+ 
+ 	return nFree;
+ }
+ 
+-int yaffs_GetNumberOfFreeChunks(yaffs_Device * dev)
++int yaffs_GetNumberOfFreeChunks(yaffs_Device *dev)
+ {
+ 	/* This is what we report to the outside world */
+ 
+ 	int nFree;
+ 	int nDirtyCacheChunks;
+ 	int blocksForCheckpoint;
++	int i;
+ 
+ #if 1
+ 	nFree = dev->nFreeChunks;
+@@ -7397,12 +7481,9 @@ int yaffs_GetNumberOfFreeChunks(yaffs_De
+ 
+ 	/* Now count the number of dirty chunks in the cache and subtract those */
+ 
+-	{
+-		int i;
+-		for (nDirtyCacheChunks = 0, i = 0; i < dev->nShortOpCaches; i++) {
+-			if (dev->srCache[i].dirty)
+-				nDirtyCacheChunks++;
+-		}
++	for (nDirtyCacheChunks = 0, i = 0; i < dev->nShortOpCaches; i++) {
++		if (dev->srCache[i].dirty)
++			nDirtyCacheChunks++;
+ 	}
+ 
+ 	nFree -= nDirtyCacheChunks;
+@@ -7410,8 +7491,8 @@ int yaffs_GetNumberOfFreeChunks(yaffs_De
+ 	nFree -= ((dev->nReservedBlocks + 1) * dev->nChunksPerBlock);
+ 
+ 	/* Now we figure out how much to reserve for the checkpoint and report that... */
+-	blocksForCheckpoint = dev->nCheckpointReservedBlocks - dev->blocksInCheckpoint;
+-	if(blocksForCheckpoint < 0)
++	blocksForCheckpoint = yaffs_CalcCheckpointBlocksRequired(dev) - dev->blocksInCheckpoint;
++	if (blocksForCheckpoint < 0)
+ 		blocksForCheckpoint = 0;
+ 
+ 	nFree -= (blocksForCheckpoint * dev->nChunksPerBlock);
+@@ -7425,12 +7506,12 @@ int yaffs_GetNumberOfFreeChunks(yaffs_De
+ 
+ static int yaffs_freeVerificationFailures;
+ 
+-static void yaffs_VerifyFreeChunks(yaffs_Device * dev)
++static void yaffs_VerifyFreeChunks(yaffs_Device *dev)
+ {
+ 	int counted;
+ 	int difference;
+ 
+-	if(yaffs_SkipVerification(dev))
++	if (yaffs_SkipVerification(dev))
+ 		return;
+ 
+ 	counted = yaffs_CountFreeChunks(dev);
+@@ -7447,23 +7528,25 @@ static void yaffs_VerifyFreeChunks(yaffs
+ 
+ /*---------------------------------------- YAFFS test code ----------------------*/
+ 
+-#define yaffs_CheckStruct(structure,syze, name) \
+-           if(sizeof(structure) != syze) \
+-	       { \
+-	         T(YAFFS_TRACE_ALWAYS,(TSTR("%s should be %d but is %d\n" TENDSTR),\
+-		 name,syze,sizeof(structure))); \
+-	         return YAFFS_FAIL; \
+-		}
++#define yaffs_CheckStruct(structure, syze, name) \
++	do { \
++		if (sizeof(structure) != syze) { \
++			T(YAFFS_TRACE_ALWAYS, (TSTR("%s should be %d but is %d\n" TENDSTR),\
++				name, syze, sizeof(structure))); \
++			return YAFFS_FAIL; \
++		} \
++	} while (0)
+ 
+ static int yaffs_CheckStructures(void)
+ {
+-/*      yaffs_CheckStruct(yaffs_Tags,8,"yaffs_Tags") */
+-/*      yaffs_CheckStruct(yaffs_TagsUnion,8,"yaffs_TagsUnion") */
+-/*      yaffs_CheckStruct(yaffs_Spare,16,"yaffs_Spare") */
++/*      yaffs_CheckStruct(yaffs_Tags,8,"yaffs_Tags"); */
++/*      yaffs_CheckStruct(yaffs_TagsUnion,8,"yaffs_TagsUnion"); */
++/*      yaffs_CheckStruct(yaffs_Spare,16,"yaffs_Spare"); */
+ #ifndef CONFIG_YAFFS_TNODE_LIST_DEBUG
+-	yaffs_CheckStruct(yaffs_Tnode, 2 * YAFFS_NTNODES_LEVEL0, "yaffs_Tnode")
++	yaffs_CheckStruct(yaffs_Tnode, 2 * YAFFS_NTNODES_LEVEL0, "yaffs_Tnode");
+ #endif
+-	    yaffs_CheckStruct(yaffs_ObjectHeader, 512, "yaffs_ObjectHeader")
+-
+-	    return YAFFS_OK;
++#ifndef CONFIG_YAFFS_WINCE
++	yaffs_CheckStruct(yaffs_ObjectHeader, 512, "yaffs_ObjectHeader");
++#endif
++	return YAFFS_OK;
+ }
+--- a/fs/yaffs2/yaffs_guts.h
++++ b/fs/yaffs2/yaffs_guts.h
+@@ -90,7 +90,7 @@
+ 
+ #define YAFFS_MAX_SHORT_OP_CACHES	20
+ 
+-#define YAFFS_N_TEMP_BUFFERS		4
++#define YAFFS_N_TEMP_BUFFERS		6
+ 
+ /* We limit the number attempts at sucessfully saving a chunk of data.
+  * Small-page devices have 32 pages per block; large-page devices have 64.
+@@ -108,6 +108,9 @@
+ #define YAFFS_LOWEST_SEQUENCE_NUMBER	0x00001000
+ #define YAFFS_HIGHEST_SEQUENCE_NUMBER	0xEFFFFF00
+ 
++/* Special sequence number for bad block that failed to be marked bad */
++#define YAFFS_SEQUENCE_BAD_BLOCK	0xFFFF0000
++
+ /* ChunkCache is used for short read/write operations.*/
+ typedef struct {
+ 	struct yaffs_ObjectStruct *object;
+@@ -134,11 +137,10 @@ typedef struct {
+ typedef struct {
+ 	unsigned chunkId:20;
+ 	unsigned serialNumber:2;
+-	unsigned byteCount:10;
++	unsigned byteCountLSB:10;
+ 	unsigned objectId:18;
+ 	unsigned ecc:12;
+-	unsigned unusedStuff:2;
+-
++	unsigned byteCountMSB:2;
+ } yaffs_Tags;
+ 
+ typedef union {
+@@ -277,13 +279,13 @@ typedef struct {
+ 
+ 	int softDeletions:10;	/* number of soft deleted pages */
+ 	int pagesInUse:10;	/* number of pages in use */
+-	yaffs_BlockState blockState:4;	/* One of the above block states */
++	unsigned blockState:4;	/* One of the above block states. NB use unsigned because enum is sometimes an int */
+ 	__u32 needsRetiring:1;	/* Data has failed on this block, need to get valid data off */
+-                        	/* and retire the block. */
+-	__u32 skipErasedCheck: 1; /* If this is set we can skip the erased check on this block */
+-	__u32 gcPrioritise: 1; 	/* An ECC check or blank check has failed on this block.
++				/* and retire the block. */
++	__u32 skipErasedCheck:1; /* If this is set we can skip the erased check on this block */
++	__u32 gcPrioritise:1; 	/* An ECC check or blank check has failed on this block.
+ 				   It should be prioritised for GC */
+-        __u32 chunkErrorStrikes:3; /* How many times we've had ecc etc failures on this block and tried to reuse it */
++	__u32 chunkErrorStrikes:3; /* How many times we've had ecc etc failures on this block and tried to reuse it */
+ 
+ #ifdef CONFIG_YAFFS_YAFFS2
+ 	__u32 hasShrinkHeader:1; /* This block has at least one shrink object header */
+@@ -300,11 +302,11 @@ typedef struct {
+ 
+ 	/* Apply to everything  */
+ 	int parentObjectId;
+-	__u16 sum__NoLongerUsed;	/* checksum of name. No longer used */
++	__u16 sum__NoLongerUsed;        /* checksum of name. No longer used */
+ 	YCHAR name[YAFFS_MAX_NAME_LENGTH + 1];
+ 
+-	/* Thes following apply to directories, files, symlinks - not hard links */
+-	__u32 yst_mode;		/* protection */
++	/* The following apply to directories, files, symlinks - not hard links */
++	__u32 yst_mode;         /* protection */
+ 
+ #ifdef CONFIG_YAFFS_WINCE
+ 	__u32 notForWinCE[5];
+@@ -331,11 +333,14 @@ typedef struct {
+ 	__u32 win_ctime[2];
+ 	__u32 win_atime[2];
+ 	__u32 win_mtime[2];
+-	__u32 roomToGrow[4];
+ #else
+-	__u32 roomToGrow[10];
++	__u32 roomToGrow[6];
++
+ #endif
++	__u32 inbandShadowsObject;
++	__u32 inbandIsShrink;
+ 
++	__u32 reservedSpace[2];
+ 	int shadowsObject;	/* This object header shadows the specified object if > 0 */
+ 
+ 	/* isShrink applies to object headers written when we shrink the file (ie resize) */
+@@ -381,7 +386,7 @@ typedef struct {
+ } yaffs_FileStructure;
+ 
+ typedef struct {
+-	struct list_head children;	/* list of child links */
++	struct ylist_head children;     /* list of child links */
+ } yaffs_DirectoryStructure;
+ 
+ typedef struct {
+@@ -418,23 +423,24 @@ struct yaffs_ObjectStruct {
+ 				 * still in the inode cache. Free of object is defered.
+ 				 * until the inode is released.
+ 				 */
++	__u8 beingCreated:1;	/* This object is still being created so skip some checks. */
+ 
+ 	__u8 serial;		/* serial number of chunk in NAND. Cached here */
+ 	__u16 sum;		/* sum of the name to speed searching */
+ 
+-	struct yaffs_DeviceStruct *myDev;	/* The device I'm on */
++	struct yaffs_DeviceStruct *myDev;       /* The device I'm on */
+ 
+-	struct list_head hashLink;	/* list of objects in this hash bucket */
++	struct ylist_head hashLink;     /* list of objects in this hash bucket */
+ 
+-	struct list_head hardLinks;	/* all the equivalent hard linked objects */
++	struct ylist_head hardLinks;    /* all the equivalent hard linked objects */
+ 
+ 	/* directory structure stuff */
+ 	/* also used for linking up the free list */
+ 	struct yaffs_ObjectStruct *parent;
+-	struct list_head siblings;
++	struct ylist_head siblings;
+ 
+ 	/* Where's my object header in NAND? */
+-	int chunkId;
++	int hdrChunk;
+ 
+ 	int nDataChunks;	/* Number of data chunks attached to the file. */
+ 
+@@ -485,7 +491,7 @@ struct yaffs_ObjectList_struct {
+ typedef struct yaffs_ObjectList_struct yaffs_ObjectList;
+ 
+ typedef struct {
+-	struct list_head list;
++	struct ylist_head list;
+ 	int count;
+ } yaffs_ObjectBucket;
+ 
+@@ -495,11 +501,10 @@ typedef struct {
+  */
+ 
+ typedef struct {
+-        int structType;
++	int structType;
+ 	__u32 objectId;
+ 	__u32 parentId;
+-	int chunkId;
+-
++	int hdrChunk;
+ 	yaffs_ObjectType variantType:3;
+ 	__u8 deleted:1;
+ 	__u8 softDeleted:1;
+@@ -511,8 +516,7 @@ typedef struct {
+ 
+ 	int nDataChunks;
+ 	__u32 fileSizeOrEquivalentObjectId;
+-
+-}yaffs_CheckpointObject;
++} yaffs_CheckpointObject;
+ 
+ /*--------------------- Temporary buffers ----------------
+  *
+@@ -528,13 +532,13 @@ typedef struct {
+ /*----------------- Device ---------------------------------*/
+ 
+ struct yaffs_DeviceStruct {
+-	struct list_head devList;
++	struct ylist_head devList;
+ 	const char *name;
+ 
+ 	/* Entry parameters set up way early. Yaffs sets up the rest.*/
+ 	int nDataBytesPerChunk;	/* Should be a power of 2 >= 512 */
+ 	int nChunksPerBlock;	/* does not need to be a power of 2 */
+-	int nBytesPerSpare;	/* spare area size */
++	int spareBytesPerChunk;	/* spare area size */
+ 	int startBlock;		/* Start block we're allowed to use */
+ 	int endBlock;		/* End block we're allowed to use */
+ 	int nReservedBlocks;	/* We want this tuneable so that we can reduce */
+@@ -544,9 +548,7 @@ struct yaffs_DeviceStruct {
+ 	/* Stuff used by the shared space checkpointing mechanism */
+ 	/* If this value is zero, then this mechanism is disabled */
+ 
+-	int nCheckpointReservedBlocks; /* Blocks to reserve for checkpoint data */
+-
+-
++/*	int nCheckpointReservedBlocks; */ /* Blocks to reserve for checkpoint data */
+ 
+ 
+ 	int nShortOpCaches;	/* If <= 0, then short op caching is disabled, else
+@@ -560,30 +562,31 @@ struct yaffs_DeviceStruct {
+ 	void *genericDevice;	/* Pointer to device context
+ 				 * On an mtd this holds the mtd pointer.
+ 				 */
+-        void *superBlock;
++	void *superBlock;
+ 
+ 	/* NAND access functions (Must be set before calling YAFFS)*/
+ 
+-	int (*writeChunkToNAND) (struct yaffs_DeviceStruct * dev,
+-				 int chunkInNAND, const __u8 * data,
+-				 const yaffs_Spare * spare);
+-	int (*readChunkFromNAND) (struct yaffs_DeviceStruct * dev,
+-				  int chunkInNAND, __u8 * data,
+-				  yaffs_Spare * spare);
+-	int (*eraseBlockInNAND) (struct yaffs_DeviceStruct * dev,
+-				 int blockInNAND);
+-	int (*initialiseNAND) (struct yaffs_DeviceStruct * dev);
++	int (*writeChunkToNAND) (struct yaffs_DeviceStruct *dev,
++					int chunkInNAND, const __u8 *data,
++					const yaffs_Spare *spare);
++	int (*readChunkFromNAND) (struct yaffs_DeviceStruct *dev,
++					int chunkInNAND, __u8 *data,
++					yaffs_Spare *spare);
++	int (*eraseBlockInNAND) (struct yaffs_DeviceStruct *dev,
++					int blockInNAND);
++	int (*initialiseNAND) (struct yaffs_DeviceStruct *dev);
++	int (*deinitialiseNAND) (struct yaffs_DeviceStruct *dev);
+ 
+ #ifdef CONFIG_YAFFS_YAFFS2
+-	int (*writeChunkWithTagsToNAND) (struct yaffs_DeviceStruct * dev,
+-					 int chunkInNAND, const __u8 * data,
+-					 const yaffs_ExtendedTags * tags);
+-	int (*readChunkWithTagsFromNAND) (struct yaffs_DeviceStruct * dev,
+-					  int chunkInNAND, __u8 * data,
+-					  yaffs_ExtendedTags * tags);
+-	int (*markNANDBlockBad) (struct yaffs_DeviceStruct * dev, int blockNo);
+-	int (*queryNANDBlock) (struct yaffs_DeviceStruct * dev, int blockNo,
+-			       yaffs_BlockState * state, int *sequenceNumber);
++	int (*writeChunkWithTagsToNAND) (struct yaffs_DeviceStruct *dev,
++					 int chunkInNAND, const __u8 *data,
++					 const yaffs_ExtendedTags *tags);
++	int (*readChunkWithTagsFromNAND) (struct yaffs_DeviceStruct *dev,
++					  int chunkInNAND, __u8 *data,
++					  yaffs_ExtendedTags *tags);
++	int (*markNANDBlockBad) (struct yaffs_DeviceStruct *dev, int blockNo);
++	int (*queryNANDBlock) (struct yaffs_DeviceStruct *dev, int blockNo,
++			       yaffs_BlockState *state, __u32 *sequenceNumber);
+ #endif
+ 
+ 	int isYaffs2;
+@@ -595,10 +598,12 @@ struct yaffs_DeviceStruct {
+ 	void (*removeObjectCallback)(struct yaffs_ObjectStruct *obj);
+ 
+ 	/* Callback to mark the superblock dirsty */
+-	void (*markSuperBlockDirty)(void * superblock);
++	void (*markSuperBlockDirty)(void *superblock);
+ 
+ 	int wideTnodesDisabled; /* Set to disable wide tnodes */
+ 
++	YCHAR *pathDividers;	/* String of legal path dividers */
++
+ 
+ 	/* End of stuff that must be set before initialisation. */
+ 
+@@ -615,16 +620,14 @@ struct yaffs_DeviceStruct {
+ 	__u32 tnodeWidth;
+ 	__u32 tnodeMask;
+ 
+-	/* Stuff to support various file offses to chunk/offset translations */
+-	/* "Crumbs" for nDataBytesPerChunk not being a power of 2 */
+-	__u32 crumbMask;
+-	__u32 crumbShift;
+-	__u32 crumbsPerChunk;
+-
+-	/* Straight shifting for nDataBytesPerChunk being a power of 2 */
+-	__u32 chunkShift;
+-	__u32 chunkMask;
+-
++	/* Stuff for figuring out file offset to chunk conversions */
++	__u32 chunkShift; /* Shift value */
++	__u32 chunkDiv;   /* Divisor after shifting: 1 for power-of-2 sizes */
++	__u32 chunkMask;  /* Mask to use for power-of-2 case */
++
++	/* Stuff to handle inband tags */
++	int inbandTags;
++	__u32 totalBytesPerChunk;
+ 
+ #ifdef __KERNEL__
+ 
+@@ -633,7 +636,7 @@ struct yaffs_DeviceStruct {
+ 	__u8 *spareBuffer;	/* For mtdif2 use. Don't know the size of the buffer
+ 				 * at compile time so we have to allocate it.
+ 				 */
+-	void (*putSuperFunc) (struct super_block * sb);
++	void (*putSuperFunc) (struct super_block *sb);
+ #endif
+ 
+ 	int isMounted;
+@@ -663,6 +666,8 @@ struct yaffs_DeviceStruct {
+ 	__u32 checkpointSum;
+ 	__u32 checkpointXor;
+ 
++	int nCheckpointBlocksRequired; /* Number of blocks needed to store current checkpoint set */
++
+ 	/* Block Info */
+ 	yaffs_BlockInfo *blockInfo;
+ 	__u8 *chunkBits;	/* bitmap of chunks in use */
+@@ -684,11 +689,15 @@ struct yaffs_DeviceStruct {
+ 	yaffs_TnodeList *allocatedTnodeList;
+ 
+ 	int isDoingGC;
++	int gcBlock;
++	int gcChunk;
+ 
+ 	int nObjectsCreated;
+ 	yaffs_Object *freeObjects;
+ 	int nFreeObjects;
+ 
++	int nHardLinks;
++
+ 	yaffs_ObjectList *allocatedObjectList;
+ 
+ 	yaffs_ObjectBucket objectBucket[YAFFS_NOBJECT_BUCKETS];
+@@ -745,8 +754,10 @@ struct yaffs_DeviceStruct {
+ 	int nBackgroundDeletions;	/* Count of background deletions. */
+ 
+ 
++	/* Temporary buffer management */
+ 	yaffs_TempBuffer tempBuffer[YAFFS_N_TEMP_BUFFERS];
+ 	int maxTemp;
++	int tempInUse;
+ 	int unmanagedTempAllocations;
+ 	int unmanagedTempDeallocations;
+ 
+@@ -758,9 +769,9 @@ struct yaffs_DeviceStruct {
+ 
+ typedef struct yaffs_DeviceStruct yaffs_Device;
+ 
+-/* The static layout of bllock usage etc is stored in the super block header */
++/* The static layout of block usage etc is stored in the super block header */
+ typedef struct {
+-        int StructType;
++	int StructType;
+ 	int version;
+ 	int checkpointStartBlock;
+ 	int checkpointEndBlock;
+@@ -773,7 +784,7 @@ typedef struct {
+  * must be preserved over unmount/mount cycles.
+  */
+ typedef struct {
+-        int structType;
++	int structType;
+ 	int nErasedBlocks;
+ 	int allocationBlock;	/* Current block being allocated off */
+ 	__u32 allocationPage;
+@@ -791,57 +802,45 @@ typedef struct {
+ 
+ 
+ typedef struct {
+-    int structType;
+-    __u32 magic;
+-    __u32 version;
+-    __u32 head;
++	int structType;
++	__u32 magic;
++	__u32 version;
++	__u32 head;
+ } yaffs_CheckpointValidity;
+ 
+-/* Function to manipulate block info */
+-static Y_INLINE yaffs_BlockInfo *yaffs_GetBlockInfo(yaffs_Device * dev, int blk)
+-{
+-	if (blk < dev->internalStartBlock || blk > dev->internalEndBlock) {
+-		T(YAFFS_TRACE_ERROR,
+-		  (TSTR
+-		   ("**>> yaffs: getBlockInfo block %d is not valid" TENDSTR),
+-		   blk));
+-		YBUG();
+-	}
+-	return &dev->blockInfo[blk - dev->internalStartBlock];
+-}
+ 
+ /*----------------------- YAFFS Functions -----------------------*/
+ 
+-int yaffs_GutsInitialise(yaffs_Device * dev);
+-void yaffs_Deinitialise(yaffs_Device * dev);
++int yaffs_GutsInitialise(yaffs_Device *dev);
++void yaffs_Deinitialise(yaffs_Device *dev);
+ 
+-int yaffs_GetNumberOfFreeChunks(yaffs_Device * dev);
++int yaffs_GetNumberOfFreeChunks(yaffs_Device *dev);
+ 
+-int yaffs_RenameObject(yaffs_Object * oldDir, const YCHAR * oldName,
+-		       yaffs_Object * newDir, const YCHAR * newName);
++int yaffs_RenameObject(yaffs_Object *oldDir, const YCHAR *oldName,
++		       yaffs_Object *newDir, const YCHAR *newName);
+ 
+-int yaffs_Unlink(yaffs_Object * dir, const YCHAR * name);
+-int yaffs_DeleteFile(yaffs_Object * obj);
++int yaffs_Unlink(yaffs_Object *dir, const YCHAR *name);
++int yaffs_DeleteObject(yaffs_Object *obj);
+ 
+-int yaffs_GetObjectName(yaffs_Object * obj, YCHAR * name, int buffSize);
+-int yaffs_GetObjectFileLength(yaffs_Object * obj);
+-int yaffs_GetObjectInode(yaffs_Object * obj);
+-unsigned yaffs_GetObjectType(yaffs_Object * obj);
+-int yaffs_GetObjectLinkCount(yaffs_Object * obj);
++int yaffs_GetObjectName(yaffs_Object *obj, YCHAR *name, int buffSize);
++int yaffs_GetObjectFileLength(yaffs_Object *obj);
++int yaffs_GetObjectInode(yaffs_Object *obj);
++unsigned yaffs_GetObjectType(yaffs_Object *obj);
++int yaffs_GetObjectLinkCount(yaffs_Object *obj);
+ 
+-int yaffs_SetAttributes(yaffs_Object * obj, struct iattr *attr);
+-int yaffs_GetAttributes(yaffs_Object * obj, struct iattr *attr);
++int yaffs_SetAttributes(yaffs_Object *obj, struct iattr *attr);
++int yaffs_GetAttributes(yaffs_Object *obj, struct iattr *attr);
+ 
+ /* File operations */
+-int yaffs_ReadDataFromFile(yaffs_Object * obj, __u8 * buffer, loff_t offset,
+-			   int nBytes);
+-int yaffs_WriteDataToFile(yaffs_Object * obj, const __u8 * buffer, loff_t offset,
+-			  int nBytes, int writeThrough);
+-int yaffs_ResizeFile(yaffs_Object * obj, loff_t newSize);
+-
+-yaffs_Object *yaffs_MknodFile(yaffs_Object * parent, const YCHAR * name,
+-			      __u32 mode, __u32 uid, __u32 gid);
+-int yaffs_FlushFile(yaffs_Object * obj, int updateTime);
++int yaffs_ReadDataFromFile(yaffs_Object *obj, __u8 *buffer, loff_t offset,
++				int nBytes);
++int yaffs_WriteDataToFile(yaffs_Object *obj, const __u8 *buffer, loff_t offset,
++				int nBytes, int writeThrough);
++int yaffs_ResizeFile(yaffs_Object *obj, loff_t newSize);
++
++yaffs_Object *yaffs_MknodFile(yaffs_Object *parent, const YCHAR *name,
++				__u32 mode, __u32 uid, __u32 gid);
++int yaffs_FlushFile(yaffs_Object *obj, int updateTime);
+ 
+ /* Flushing and checkpointing */
+ void yaffs_FlushEntireDeviceCache(yaffs_Device *dev);
+@@ -850,33 +849,33 @@ int yaffs_CheckpointSave(yaffs_Device *d
+ int yaffs_CheckpointRestore(yaffs_Device *dev);
+ 
+ /* Directory operations */
+-yaffs_Object *yaffs_MknodDirectory(yaffs_Object * parent, const YCHAR * name,
+-				   __u32 mode, __u32 uid, __u32 gid);
+-yaffs_Object *yaffs_FindObjectByName(yaffs_Object * theDir, const YCHAR * name);
+-int yaffs_ApplyToDirectoryChildren(yaffs_Object * theDir,
++yaffs_Object *yaffs_MknodDirectory(yaffs_Object *parent, const YCHAR *name,
++				__u32 mode, __u32 uid, __u32 gid);
++yaffs_Object *yaffs_FindObjectByName(yaffs_Object *theDir, const YCHAR *name);
++int yaffs_ApplyToDirectoryChildren(yaffs_Object *theDir,
+ 				   int (*fn) (yaffs_Object *));
+ 
+-yaffs_Object *yaffs_FindObjectByNumber(yaffs_Device * dev, __u32 number);
++yaffs_Object *yaffs_FindObjectByNumber(yaffs_Device *dev, __u32 number);
+ 
+ /* Link operations */
+-yaffs_Object *yaffs_Link(yaffs_Object * parent, const YCHAR * name,
+-			 yaffs_Object * equivalentObject);
++yaffs_Object *yaffs_Link(yaffs_Object *parent, const YCHAR *name,
++			 yaffs_Object *equivalentObject);
+ 
+-yaffs_Object *yaffs_GetEquivalentObject(yaffs_Object * obj);
++yaffs_Object *yaffs_GetEquivalentObject(yaffs_Object *obj);
+ 
+ /* Symlink operations */
+-yaffs_Object *yaffs_MknodSymLink(yaffs_Object * parent, const YCHAR * name,
++yaffs_Object *yaffs_MknodSymLink(yaffs_Object *parent, const YCHAR *name,
+ 				 __u32 mode, __u32 uid, __u32 gid,
+-				 const YCHAR * alias);
+-YCHAR *yaffs_GetSymlinkAlias(yaffs_Object * obj);
++				 const YCHAR *alias);
++YCHAR *yaffs_GetSymlinkAlias(yaffs_Object *obj);
+ 
+ /* Special inodes (fifos, sockets and devices) */
+-yaffs_Object *yaffs_MknodSpecial(yaffs_Object * parent, const YCHAR * name,
++yaffs_Object *yaffs_MknodSpecial(yaffs_Object *parent, const YCHAR *name,
+ 				 __u32 mode, __u32 uid, __u32 gid, __u32 rdev);
+ 
+ /* Special directories */
+-yaffs_Object *yaffs_Root(yaffs_Device * dev);
+-yaffs_Object *yaffs_LostNFound(yaffs_Device * dev);
++yaffs_Object *yaffs_Root(yaffs_Device *dev);
++yaffs_Object *yaffs_LostNFound(yaffs_Device *dev);
+ 
+ #ifdef CONFIG_YAFFS_WINCE
+ /* CONFIG_YAFFS_WINCE special stuff */
+@@ -885,18 +884,21 @@ void yfsd_WinFileTimeNow(__u32 target[2]
+ 
+ #ifdef __KERNEL__
+ 
+-void yaffs_HandleDeferedFree(yaffs_Object * obj);
++void yaffs_HandleDeferedFree(yaffs_Object *obj);
+ #endif
+ 
+ /* Debug dump  */
+-int yaffs_DumpObject(yaffs_Object * obj);
++int yaffs_DumpObject(yaffs_Object *obj);
+ 
+-void yaffs_GutsTest(yaffs_Device * dev);
++void yaffs_GutsTest(yaffs_Device *dev);
+ 
+ /* A few useful functions */
+-void yaffs_InitialiseTags(yaffs_ExtendedTags * tags);
+-void yaffs_DeleteChunk(yaffs_Device * dev, int chunkId, int markNAND, int lyn);
+-int yaffs_CheckFF(__u8 * buffer, int nBytes);
++void yaffs_InitialiseTags(yaffs_ExtendedTags *tags);
++void yaffs_DeleteChunk(yaffs_Device *dev, int chunkId, int markNAND, int lyn);
++int yaffs_CheckFF(__u8 *buffer, int nBytes);
+ void yaffs_HandleChunkError(yaffs_Device *dev, yaffs_BlockInfo *bi);
+ 
++__u8 *yaffs_GetTempBuffer(yaffs_Device *dev, int lineNo);
++void yaffs_ReleaseTempBuffer(yaffs_Device *dev, __u8 *buffer, int lineNo);
++
+ #endif
+--- a/fs/yaffs2/yaffs_mtdif1.c
++++ b/fs/yaffs2/yaffs_mtdif1.c
+@@ -26,7 +26,7 @@
+ #include "yportenv.h"
+ #include "yaffs_guts.h"
+ #include "yaffs_packedtags1.h"
+-#include "yaffs_tagscompat.h"	// for yaffs_CalcTagsECC
++#include "yaffs_tagscompat.h"	/* for yaffs_CalcTagsECC */
+ 
+ #include "linux/kernel.h"
+ #include "linux/version.h"
+@@ -34,9 +34,9 @@
+ #include "linux/mtd/mtd.h"
+ 
+ /* Don't compile this module if we don't have MTD's mtd_oob_ops interface */
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 
+-const char *yaffs_mtdif1_c_version = "$Id: yaffs_mtdif1.c,v 1.3 2007/05/15 20:16:11 ian Exp $";
++const char *yaffs_mtdif1_c_version = "$Id: yaffs_mtdif1.c,v 1.10 2009-03-09 07:41:10 charles Exp $";
+ 
+ #ifndef CONFIG_YAFFS_9BYTE_TAGS
+ # define YTAG1_SIZE 8
+@@ -89,9 +89,9 @@ static struct nand_ecclayout nand_oob_16
+  * Returns YAFFS_OK or YAFFS_FAIL.
+  */
+ int nandmtd1_WriteChunkWithTagsToNAND(yaffs_Device *dev,
+-	int chunkInNAND, const __u8 * data, const yaffs_ExtendedTags * etags)
++	int chunkInNAND, const __u8 *data, const yaffs_ExtendedTags *etags)
+ {
+-	struct mtd_info * mtd = dev->genericDevice;
++	struct mtd_info *mtd = dev->genericDevice;
+ 	int chunkBytes = dev->nDataBytesPerChunk;
+ 	loff_t addr = ((loff_t)chunkInNAND) * chunkBytes;
+ 	struct mtd_oob_ops ops;
+@@ -146,7 +146,7 @@ int nandmtd1_WriteChunkWithTagsToNAND(ya
+ 
+ /* Return with empty ExtendedTags but add eccResult.
+  */
+-static int rettags(yaffs_ExtendedTags * etags, int eccResult, int retval)
++static int rettags(yaffs_ExtendedTags *etags, int eccResult, int retval)
+ {
+ 	if (etags) {
+ 		memset(etags, 0, sizeof(*etags));
+@@ -169,9 +169,9 @@ static int rettags(yaffs_ExtendedTags *
+  * Returns YAFFS_OK or YAFFS_FAIL.
+  */
+ int nandmtd1_ReadChunkWithTagsFromNAND(yaffs_Device *dev,
+-	int chunkInNAND, __u8 * data, yaffs_ExtendedTags * etags)
++	int chunkInNAND, __u8 *data, yaffs_ExtendedTags *etags)
+ {
+-	struct mtd_info * mtd = dev->genericDevice;
++	struct mtd_info *mtd = dev->genericDevice;
+ 	int chunkBytes = dev->nDataBytesPerChunk;
+ 	loff_t addr = ((loff_t)chunkInNAND) * chunkBytes;
+ 	int eccres = YAFFS_ECC_RESULT_NO_ERROR;
+@@ -189,7 +189,7 @@ int nandmtd1_ReadChunkWithTagsFromNAND(y
+ 	ops.datbuf = data;
+ 	ops.oobbuf = (__u8 *)&pt1;
+ 
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20))
++#if (MTD_VERSION_CODE < MTD_VERSION(2, 6, 20))
+ 	/* In MTD 2.6.18 to 2.6.19 nand_base.c:nand_do_read_oob() has a bug;
+ 	 * help it out with ops.len = ops.ooblen when ops.datbuf == NULL.
+ 	 */
+@@ -284,11 +284,11 @@ int nandmtd1_ReadChunkWithTagsFromNAND(y
+  */
+ int nandmtd1_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo)
+ {
+-	struct mtd_info * mtd = dev->genericDevice;
++	struct mtd_info *mtd = dev->genericDevice;
+ 	int blocksize = dev->nChunksPerBlock * dev->nDataBytesPerChunk;
+ 	int retval;
+ 
+-	yaffs_trace(YAFFS_TRACE_BAD_BLOCKS, "marking block %d bad", blockNo);
++	yaffs_trace(YAFFS_TRACE_BAD_BLOCKS, "marking block %d bad\n", blockNo);
+ 
+ 	retval = mtd->block_markbad(mtd, (loff_t)blocksize * blockNo);
+ 	return (retval) ? YAFFS_FAIL : YAFFS_OK;
+@@ -298,7 +298,7 @@ int nandmtd1_MarkNANDBlockBad(struct yaf
+  *
+  * Returns YAFFS_OK or YAFFS_FAIL.
+  */
+-static int nandmtd1_TestPrerequists(struct mtd_info * mtd)
++static int nandmtd1_TestPrerequists(struct mtd_info *mtd)
+ {
+ 	/* 2.6.18 has mtd->ecclayout->oobavail */
+ 	/* 2.6.21 has mtd->ecclayout->oobavail and mtd->oobavail */
+@@ -323,10 +323,11 @@ static int nandmtd1_TestPrerequists(stru
+  * Always returns YAFFS_OK.
+  */
+ int nandmtd1_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+-	yaffs_BlockState * pState, int *pSequenceNumber)
++	yaffs_BlockState *pState, __u32 *pSequenceNumber)
+ {
+-	struct mtd_info * mtd = dev->genericDevice;
++	struct mtd_info *mtd = dev->genericDevice;
+ 	int chunkNo = blockNo * dev->nChunksPerBlock;
++	loff_t addr = (loff_t)chunkNo * dev->nDataBytesPerChunk;
+ 	yaffs_ExtendedTags etags;
+ 	int state = YAFFS_BLOCK_STATE_DEAD;
+ 	int seqnum = 0;
+@@ -335,21 +336,22 @@ int nandmtd1_QueryNANDBlock(struct yaffs
+ 	/* We don't yet have a good place to test for MTD config prerequists.
+ 	 * Do it here as we are called during the initial scan.
+ 	 */
+-	if (nandmtd1_TestPrerequists(mtd) != YAFFS_OK) {
++	if (nandmtd1_TestPrerequists(mtd) != YAFFS_OK)
+ 		return YAFFS_FAIL;
+-	}
+ 
+ 	retval = nandmtd1_ReadChunkWithTagsFromNAND(dev, chunkNo, NULL, &etags);
++	etags.blockBad = (mtd->block_isbad)(mtd, addr);
+ 	if (etags.blockBad) {
+ 		yaffs_trace(YAFFS_TRACE_BAD_BLOCKS,
+-			"block %d is marked bad", blockNo);
++			"block %d is marked bad\n", blockNo);
+ 		state = YAFFS_BLOCK_STATE_DEAD;
+-	}
+-	else if (etags.chunkUsed) {
++	} else if (etags.eccResult != YAFFS_ECC_RESULT_NO_ERROR) {
++		/* bad tags, need to look more closely */
++		state = YAFFS_BLOCK_STATE_NEEDS_SCANNING;
++	} else if (etags.chunkUsed) {
+ 		state = YAFFS_BLOCK_STATE_NEEDS_SCANNING;
+ 		seqnum = etags.sequenceNumber;
+-	}
+-	else {
++	} else {
+ 		state = YAFFS_BLOCK_STATE_EMPTY;
+ 	}
+ 
+@@ -360,4 +362,4 @@ int nandmtd1_QueryNANDBlock(struct yaffs
+ 	return YAFFS_OK;
+ }
+ 
+-#endif /*KERNEL_VERSION*/
++#endif /*MTD_VERSION*/
+--- a/fs/yaffs2/yaffs_mtdif1.h
++++ b/fs/yaffs2/yaffs_mtdif1.h
+@@ -14,15 +14,15 @@
+ #ifndef __YAFFS_MTDIF1_H__
+ #define __YAFFS_MTDIF1_H__
+ 
+-int nandmtd1_WriteChunkWithTagsToNAND(yaffs_Device * dev, int chunkInNAND,
+-	const __u8 * data, const yaffs_ExtendedTags * tags);
++int nandmtd1_WriteChunkWithTagsToNAND(yaffs_Device *dev, int chunkInNAND,
++	const __u8 *data, const yaffs_ExtendedTags *tags);
+ 
+-int nandmtd1_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+-	__u8 * data, yaffs_ExtendedTags * tags);
++int nandmtd1_ReadChunkWithTagsFromNAND(yaffs_Device *dev, int chunkInNAND,
++	__u8 *data, yaffs_ExtendedTags *tags);
+ 
+ int nandmtd1_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo);
+ 
+ int nandmtd1_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+-	yaffs_BlockState * state, int *sequenceNumber);
++	yaffs_BlockState *state, __u32 *sequenceNumber);
+ 
+ #endif
+--- a/fs/yaffs2/yaffs_mtdif2.c
++++ b/fs/yaffs2/yaffs_mtdif2.c
+@@ -14,7 +14,7 @@
+ /* mtd interface for YAFFS2 */
+ 
+ const char *yaffs_mtdif2_c_version =
+-    "$Id: yaffs_mtdif2.c,v 1.17 2007-02-14 01:09:06 wookey Exp $";
++	"$Id: yaffs_mtdif2.c,v 1.23 2009-03-06 17:20:53 wookey Exp $";
+ 
+ #include "yportenv.h"
+ 
+@@ -27,19 +27,23 @@ const char *yaffs_mtdif2_c_version =
+ 
+ #include "yaffs_packedtags2.h"
+ 
+-int nandmtd2_WriteChunkWithTagsToNAND(yaffs_Device * dev, int chunkInNAND,
+-				      const __u8 * data,
+-				      const yaffs_ExtendedTags * tags)
++/* NB For use with inband tags....
++ * We assume that the data buffer is of size totalBytersPerChunk so that we can also
++ * use it to load the tags.
++ */
++int nandmtd2_WriteChunkWithTagsToNAND(yaffs_Device *dev, int chunkInNAND,
++				      const __u8 *data,
++				      const yaffs_ExtendedTags *tags)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	struct mtd_oob_ops ops;
+ #else
+ 	size_t dummy;
+ #endif
+ 	int retval = 0;
+ 
+-	loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
++	loff_t addr;
+ 
+ 	yaffs_PackedTags2 pt;
+ 
+@@ -48,46 +52,40 @@ int nandmtd2_WriteChunkWithTagsToNAND(ya
+ 	   ("nandmtd2_WriteChunkWithTagsToNAND chunk %d data %p tags %p"
+ 	    TENDSTR), chunkInNAND, data, tags));
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-	if (tags)
+-		yaffs_PackTags2(&pt, tags);
+-	else
+-		BUG(); /* both tags and data should always be present */
+ 
+-	if (data) {
+-		ops.mode = MTD_OOB_AUTO;
+-		ops.ooblen = sizeof(pt);
+-		ops.len = dev->nDataBytesPerChunk;
+-		ops.ooboffs = 0;
+-		ops.datbuf = (__u8 *)data;
+-		ops.oobbuf = (void *)&pt;
+-		retval = mtd->write_oob(mtd, addr, &ops);
++	addr  = ((loff_t) chunkInNAND) * dev->totalBytesPerChunk;
++
++	/* For yaffs2 writing there must be both data and tags.
++	 * If we're using inband tags, then the tags are stuffed into
++	 * the end of the data buffer.
++	 */
++	if (!data || !tags)
++		BUG();
++	else if (dev->inbandTags) {
++		yaffs_PackedTags2TagsPart *pt2tp;
++		pt2tp = (yaffs_PackedTags2TagsPart *)(data + dev->nDataBytesPerChunk);
++		yaffs_PackTags2TagsPart(pt2tp, tags);
+ 	} else
+-		BUG(); /* both tags and data should always be present */
+-#else
+-	if (tags) {
+ 		yaffs_PackTags2(&pt, tags);
+-	}
+ 
+-	if (data && tags) {
+-		if (dev->useNANDECC)
+-			retval =
+-			    mtd->write_ecc(mtd, addr, dev->nDataBytesPerChunk,
+-					   &dummy, data, (__u8 *) & pt, NULL);
+-		else
+-			retval =
+-			    mtd->write_ecc(mtd, addr, dev->nDataBytesPerChunk,
+-					   &dummy, data, (__u8 *) & pt, NULL);
+-	} else {
+-		if (data)
+-			retval =
+-			    mtd->write(mtd, addr, dev->nDataBytesPerChunk, &dummy,
+-				       data);
+-		if (tags)
+-			retval =
+-			    mtd->write_oob(mtd, addr, mtd->oobsize, &dummy,
+-					   (__u8 *) & pt);
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
++	ops.mode = MTD_OOB_AUTO;
++	ops.ooblen = (dev->inbandTags) ? 0 : sizeof(pt);
++	ops.len = dev->totalBytesPerChunk;
++	ops.ooboffs = 0;
++	ops.datbuf = (__u8 *)data;
++	ops.oobbuf = (dev->inbandTags) ? NULL : (void *)&pt;
++	retval = mtd->write_oob(mtd, addr, &ops);
+ 
++#else
++	if (!dev->inbandTags) {
++		retval =
++		    mtd->write_ecc(mtd, addr, dev->nDataBytesPerChunk,
++				   &dummy, data, (__u8 *) &pt, NULL);
++	} else {
++		retval =
++		    mtd->write(mtd, addr, dev->totalBytesPerChunk, &dummy,
++			       data);
+ 	}
+ #endif
+ 
+@@ -97,17 +95,18 @@ int nandmtd2_WriteChunkWithTagsToNAND(ya
+ 		return YAFFS_FAIL;
+ }
+ 
+-int nandmtd2_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+-				       __u8 * data, yaffs_ExtendedTags * tags)
++int nandmtd2_ReadChunkWithTagsFromNAND(yaffs_Device *dev, int chunkInNAND,
++				       __u8 *data, yaffs_ExtendedTags *tags)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	struct mtd_oob_ops ops;
+ #endif
+ 	size_t dummy;
+ 	int retval = 0;
++	int localData = 0;
+ 
+-	loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
++	loff_t addr = ((loff_t) chunkInNAND) * dev->totalBytesPerChunk;
+ 
+ 	yaffs_PackedTags2 pt;
+ 
+@@ -116,9 +115,20 @@ int nandmtd2_ReadChunkWithTagsFromNAND(y
+ 	   ("nandmtd2_ReadChunkWithTagsFromNAND chunk %d data %p tags %p"
+ 	    TENDSTR), chunkInNAND, data, tags));
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-	if (data && !tags)
+-		retval = mtd->read(mtd, addr, dev->nDataBytesPerChunk,
++	if (dev->inbandTags) {
++
++		if (!data) {
++			localData = 1;
++			data = yaffs_GetTempBuffer(dev, __LINE__);
++		}
++
++
++	}
++
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
++	if (dev->inbandTags || (data && !tags))
++		retval = mtd->read(mtd, addr, dev->totalBytesPerChunk,
+ 				&dummy, data);
+ 	else if (tags) {
+ 		ops.mode = MTD_OOB_AUTO;
+@@ -130,38 +140,42 @@ int nandmtd2_ReadChunkWithTagsFromNAND(y
+ 		retval = mtd->read_oob(mtd, addr, &ops);
+ 	}
+ #else
+-	if (data && tags) {
+-		if (dev->useNANDECC) {
+-			retval =
+-			    mtd->read_ecc(mtd, addr, dev->nDataBytesPerChunk,
+-					  &dummy, data, dev->spareBuffer,
+-					  NULL);
+-		} else {
+-			retval =
+-			    mtd->read_ecc(mtd, addr, dev->nDataBytesPerChunk,
++	if (!dev->inbandTags && data && tags) {
++
++		retval = mtd->read_ecc(mtd, addr, dev->nDataBytesPerChunk,
+ 					  &dummy, data, dev->spareBuffer,
+ 					  NULL);
+-		}
+ 	} else {
+ 		if (data)
+ 			retval =
+ 			    mtd->read(mtd, addr, dev->nDataBytesPerChunk, &dummy,
+ 				      data);
+-		if (tags)
++		if (!dev->inbandTags && tags)
+ 			retval =
+ 			    mtd->read_oob(mtd, addr, mtd->oobsize, &dummy,
+ 					  dev->spareBuffer);
+ 	}
+ #endif
+ 
+-	memcpy(&pt, dev->spareBuffer, sizeof(pt));
+ 
+-	if (tags)
+-		yaffs_UnpackTags2(tags, &pt);
++	if (dev->inbandTags) {
++		if (tags) {
++			yaffs_PackedTags2TagsPart *pt2tp;
++			pt2tp = (yaffs_PackedTags2TagsPart *)&data[dev->nDataBytesPerChunk];
++			yaffs_UnpackTags2TagsPart(tags, pt2tp);
++		}
++	} else {
++		if (tags) {
++			memcpy(&pt, dev->spareBuffer, sizeof(pt));
++			yaffs_UnpackTags2(tags, &pt);
++		}
++	}
++
++	if (localData)
++		yaffs_ReleaseTempBuffer(dev, data, __LINE__);
+ 
+-	if(tags && retval == -EBADMSG && tags->eccResult == YAFFS_ECC_RESULT_NO_ERROR)
++	if (tags && retval == -EBADMSG && tags->eccResult == YAFFS_ECC_RESULT_NO_ERROR)
+ 		tags->eccResult = YAFFS_ECC_RESULT_UNFIXED;
+-
+ 	if (retval == 0)
+ 		return YAFFS_OK;
+ 	else
+@@ -178,7 +192,7 @@ int nandmtd2_MarkNANDBlockBad(struct yaf
+ 	retval =
+ 	    mtd->block_markbad(mtd,
+ 			       blockNo * dev->nChunksPerBlock *
+-			       dev->nDataBytesPerChunk);
++			       dev->totalBytesPerChunk);
+ 
+ 	if (retval == 0)
+ 		return YAFFS_OK;
+@@ -188,7 +202,7 @@ int nandmtd2_MarkNANDBlockBad(struct yaf
+ }
+ 
+ int nandmtd2_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+-			    yaffs_BlockState * state, int *sequenceNumber)
++			    yaffs_BlockState *state, __u32 *sequenceNumber)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+ 	int retval;
+@@ -198,7 +212,7 @@ int nandmtd2_QueryNANDBlock(struct yaffs
+ 	retval =
+ 	    mtd->block_isbad(mtd,
+ 			     blockNo * dev->nChunksPerBlock *
+-			     dev->nDataBytesPerChunk);
++			     dev->totalBytesPerChunk);
+ 
+ 	if (retval) {
+ 		T(YAFFS_TRACE_MTD, (TSTR("block is bad" TENDSTR)));
+--- a/fs/yaffs2/yaffs_mtdif2.h
++++ b/fs/yaffs2/yaffs_mtdif2.h
+@@ -17,13 +17,13 @@
+ #define __YAFFS_MTDIF2_H__
+ 
+ #include "yaffs_guts.h"
+-int nandmtd2_WriteChunkWithTagsToNAND(yaffs_Device * dev, int chunkInNAND,
+-				      const __u8 * data,
+-				      const yaffs_ExtendedTags * tags);
+-int nandmtd2_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+-				       __u8 * data, yaffs_ExtendedTags * tags);
++int nandmtd2_WriteChunkWithTagsToNAND(yaffs_Device *dev, int chunkInNAND,
++				const __u8 *data,
++				const yaffs_ExtendedTags *tags);
++int nandmtd2_ReadChunkWithTagsFromNAND(yaffs_Device *dev, int chunkInNAND,
++				__u8 *data, yaffs_ExtendedTags *tags);
+ int nandmtd2_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo);
+ int nandmtd2_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+-			    yaffs_BlockState * state, int *sequenceNumber);
++			yaffs_BlockState *state, __u32 *sequenceNumber);
+ 
+ #endif
+--- a/fs/yaffs2/yaffs_mtdif.c
++++ b/fs/yaffs2/yaffs_mtdif.c
+@@ -12,7 +12,7 @@
+  */
+ 
+ const char *yaffs_mtdif_c_version =
+-    "$Id: yaffs_mtdif.c,v 1.19 2007-02-14 01:09:06 wookey Exp $";
++	"$Id: yaffs_mtdif.c,v 1.22 2009-03-06 17:20:51 wookey Exp $";
+ 
+ #include "yportenv.h"
+ 
+@@ -24,7 +24,7 @@ const char *yaffs_mtdif_c_version =
+ #include "linux/time.h"
+ #include "linux/mtd/nand.h"
+ 
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18))
++#if (MTD_VERSION_CODE < MTD_VERSION(2, 6, 18))
+ static struct nand_oobinfo yaffs_oobinfo = {
+ 	.useecc = 1,
+ 	.eccbytes = 6,
+@@ -36,7 +36,7 @@ static struct nand_oobinfo yaffs_noeccin
+ };
+ #endif
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ static inline void translate_spare2oob(const yaffs_Spare *spare, __u8 *oob)
+ {
+ 	oob[0] = spare->tagByte0;
+@@ -45,8 +45,8 @@ static inline void translate_spare2oob(c
+ 	oob[3] = spare->tagByte3;
+ 	oob[4] = spare->tagByte4;
+ 	oob[5] = spare->tagByte5 & 0x3f;
+-	oob[5] |= spare->blockStatus == 'Y' ? 0: 0x80;
+-	oob[5] |= spare->pageStatus == 0 ? 0: 0x40;
++	oob[5] |= spare->blockStatus == 'Y' ? 0 : 0x80;
++	oob[5] |= spare->pageStatus == 0 ? 0 : 0x40;
+ 	oob[6] = spare->tagByte6;
+ 	oob[7] = spare->tagByte7;
+ }
+@@ -71,18 +71,18 @@ static inline void translate_oob2spare(y
+ }
+ #endif
+ 
+-int nandmtd_WriteChunkToNAND(yaffs_Device * dev, int chunkInNAND,
+-			     const __u8 * data, const yaffs_Spare * spare)
++int nandmtd_WriteChunkToNAND(yaffs_Device *dev, int chunkInNAND,
++			     const __u8 *data, const yaffs_Spare *spare)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	struct mtd_oob_ops ops;
+ #endif
+ 	size_t dummy;
+ 	int retval = 0;
+ 
+ 	loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	__u8 spareAsBytes[8]; /* OOB */
+ 
+ 	if (data && !spare)
+@@ -135,18 +135,18 @@ int nandmtd_WriteChunkToNAND(yaffs_Devic
+ 		return YAFFS_FAIL;
+ }
+ 
+-int nandmtd_ReadChunkFromNAND(yaffs_Device * dev, int chunkInNAND, __u8 * data,
+-			      yaffs_Spare * spare)
++int nandmtd_ReadChunkFromNAND(yaffs_Device *dev, int chunkInNAND, __u8 *data,
++			      yaffs_Spare *spare)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	struct mtd_oob_ops ops;
+ #endif
+ 	size_t dummy;
+ 	int retval = 0;
+ 
+ 	loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	__u8 spareAsBytes[8]; /* OOB */
+ 
+ 	if (data && !spare)
+@@ -205,7 +205,7 @@ int nandmtd_ReadChunkFromNAND(yaffs_Devi
+ 		return YAFFS_FAIL;
+ }
+ 
+-int nandmtd_EraseBlockInNAND(yaffs_Device * dev, int blockNumber)
++int nandmtd_EraseBlockInNAND(yaffs_Device *dev, int blockNumber)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+ 	__u32 addr =
+@@ -234,7 +234,7 @@ int nandmtd_EraseBlockInNAND(yaffs_Devic
+ 		return YAFFS_FAIL;
+ }
+ 
+-int nandmtd_InitialiseNAND(yaffs_Device * dev)
++int nandmtd_InitialiseNAND(yaffs_Device *dev)
+ {
+ 	return YAFFS_OK;
+ }
+--- a/fs/yaffs2/yaffs_mtdif.h
++++ b/fs/yaffs2/yaffs_mtdif.h
+@@ -18,10 +18,15 @@
+ 
+ #include "yaffs_guts.h"
+ 
+-int nandmtd_WriteChunkToNAND(yaffs_Device * dev, int chunkInNAND,
+-			     const __u8 * data, const yaffs_Spare * spare);
+-int nandmtd_ReadChunkFromNAND(yaffs_Device * dev, int chunkInNAND, __u8 * data,
+-			      yaffs_Spare * spare);
+-int nandmtd_EraseBlockInNAND(yaffs_Device * dev, int blockNumber);
+-int nandmtd_InitialiseNAND(yaffs_Device * dev);
++#if (MTD_VERSION_CODE < MTD_VERSION(2, 6, 18))
++extern struct nand_oobinfo yaffs_oobinfo;
++extern struct nand_oobinfo yaffs_noeccinfo;
++#endif
++
++int nandmtd_WriteChunkToNAND(yaffs_Device *dev, int chunkInNAND,
++			const __u8 *data, const yaffs_Spare *spare);
++int nandmtd_ReadChunkFromNAND(yaffs_Device *dev, int chunkInNAND, __u8 *data,
++			yaffs_Spare *spare);
++int nandmtd_EraseBlockInNAND(yaffs_Device *dev, int blockNumber);
++int nandmtd_InitialiseNAND(yaffs_Device *dev);
+ #endif
+--- a/fs/yaffs2/yaffs_nand.c
++++ b/fs/yaffs2/yaffs_nand.c
+@@ -12,16 +12,17 @@
+  */
+ 
+ const char *yaffs_nand_c_version =
+-    "$Id: yaffs_nand.c,v 1.7 2007-02-14 01:09:06 wookey Exp $";
++	"$Id: yaffs_nand.c,v 1.10 2009-03-06 17:20:54 wookey Exp $";
+ 
+ #include "yaffs_nand.h"
+ #include "yaffs_tagscompat.h"
+ #include "yaffs_tagsvalidity.h"
+ 
++#include "yaffs_getblockinfo.h"
+ 
+-int yaffs_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+-					   __u8 * buffer,
+-					   yaffs_ExtendedTags * tags)
++int yaffs_ReadChunkWithTagsFromNAND(yaffs_Device *dev, int chunkInNAND,
++					   __u8 *buffer,
++					   yaffs_ExtendedTags *tags)
+ {
+ 	int result;
+ 	yaffs_ExtendedTags localTags;
+@@ -29,7 +30,7 @@ int yaffs_ReadChunkWithTagsFromNAND(yaff
+ 	int realignedChunkInNAND = chunkInNAND - dev->chunkOffset;
+ 
+ 	/* If there are no tags provided, use local tags to get prioritised gc working */
+-	if(!tags)
++	if (!tags)
+ 		tags = &localTags;
+ 
+ 	if (dev->readChunkWithTagsFromNAND)
+@@ -40,20 +41,20 @@ int yaffs_ReadChunkWithTagsFromNAND(yaff
+ 									realignedChunkInNAND,
+ 									buffer,
+ 									tags);
+-	if(tags &&
+-	   tags->eccResult > YAFFS_ECC_RESULT_NO_ERROR){
++	if (tags &&
++	   tags->eccResult > YAFFS_ECC_RESULT_NO_ERROR) {
+ 
+ 		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, chunkInNAND/dev->nChunksPerBlock);
+-                yaffs_HandleChunkError(dev,bi);
++		yaffs_HandleChunkError(dev, bi);
+ 	}
+ 
+ 	return result;
+ }
+ 
+-int yaffs_WriteChunkWithTagsToNAND(yaffs_Device * dev,
++int yaffs_WriteChunkWithTagsToNAND(yaffs_Device *dev,
+ 						   int chunkInNAND,
+-						   const __u8 * buffer,
+-						   yaffs_ExtendedTags * tags)
++						   const __u8 *buffer,
++						   yaffs_ExtendedTags *tags)
+ {
+ 	chunkInNAND -= dev->chunkOffset;
+ 
+@@ -84,7 +85,7 @@ int yaffs_WriteChunkWithTagsToNAND(yaffs
+ 								       tags);
+ }
+ 
+-int yaffs_MarkBlockBad(yaffs_Device * dev, int blockNo)
++int yaffs_MarkBlockBad(yaffs_Device *dev, int blockNo)
+ {
+ 	blockNo -= dev->blockOffset;
+ 
+@@ -95,10 +96,10 @@ int yaffs_MarkBlockBad(yaffs_Device * de
+ 		return yaffs_TagsCompatabilityMarkNANDBlockBad(dev, blockNo);
+ }
+ 
+-int yaffs_QueryInitialBlockState(yaffs_Device * dev,
++int yaffs_QueryInitialBlockState(yaffs_Device *dev,
+ 						 int blockNo,
+-						 yaffs_BlockState * state,
+-						 unsigned *sequenceNumber)
++						 yaffs_BlockState *state,
++						 __u32 *sequenceNumber)
+ {
+ 	blockNo -= dev->blockOffset;
+ 
+--- a/fs/yaffs2/yaffs_nandemul2k.h
++++ b/fs/yaffs2/yaffs_nandemul2k.h
+@@ -21,14 +21,14 @@
+ #include "yaffs_guts.h"
+ 
+ int nandemul2k_WriteChunkWithTagsToNAND(struct yaffs_DeviceStruct *dev,
+-					int chunkInNAND, const __u8 * data,
+-					yaffs_ExtendedTags * tags);
++					int chunkInNAND, const __u8 *data,
++					const yaffs_ExtendedTags *tags);
+ int nandemul2k_ReadChunkWithTagsFromNAND(struct yaffs_DeviceStruct *dev,
+-					 int chunkInNAND, __u8 * data,
+-					 yaffs_ExtendedTags * tags);
++					 int chunkInNAND, __u8 *data,
++					 yaffs_ExtendedTags *tags);
+ int nandemul2k_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo);
+ int nandemul2k_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+-			      yaffs_BlockState * state, int *sequenceNumber);
++			      yaffs_BlockState *state, __u32 *sequenceNumber);
+ int nandemul2k_EraseBlockInNAND(struct yaffs_DeviceStruct *dev,
+ 				int blockInNAND);
+ int nandemul2k_InitialiseNAND(struct yaffs_DeviceStruct *dev);
+--- a/fs/yaffs2/yaffs_nand.h
++++ b/fs/yaffs2/yaffs_nand.h
+@@ -19,21 +19,21 @@
+ 
+ 
+ 
+-int yaffs_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+-					   __u8 * buffer,
+-					   yaffs_ExtendedTags * tags);
+-
+-int yaffs_WriteChunkWithTagsToNAND(yaffs_Device * dev,
+-						   int chunkInNAND,
+-						   const __u8 * buffer,
+-						   yaffs_ExtendedTags * tags);
+-
+-int yaffs_MarkBlockBad(yaffs_Device * dev, int blockNo);
+-
+-int yaffs_QueryInitialBlockState(yaffs_Device * dev,
+-						 int blockNo,
+-						 yaffs_BlockState * state,
+-						 unsigned *sequenceNumber);
++int yaffs_ReadChunkWithTagsFromNAND(yaffs_Device *dev, int chunkInNAND,
++					__u8 *buffer,
++					yaffs_ExtendedTags *tags);
++
++int yaffs_WriteChunkWithTagsToNAND(yaffs_Device *dev,
++						int chunkInNAND,
++						const __u8 *buffer,
++						yaffs_ExtendedTags *tags);
++
++int yaffs_MarkBlockBad(yaffs_Device *dev, int blockNo);
++
++int yaffs_QueryInitialBlockState(yaffs_Device *dev,
++						int blockNo,
++						yaffs_BlockState *state,
++						unsigned *sequenceNumber);
+ 
+ int yaffs_EraseBlockInNAND(struct yaffs_DeviceStruct *dev,
+ 				  int blockInNAND);
+--- a/fs/yaffs2/yaffs_packedtags1.c
++++ b/fs/yaffs2/yaffs_packedtags1.c
+@@ -14,7 +14,7 @@
+ #include "yaffs_packedtags1.h"
+ #include "yportenv.h"
+ 
+-void yaffs_PackTags1(yaffs_PackedTags1 * pt, const yaffs_ExtendedTags * t)
++void yaffs_PackTags1(yaffs_PackedTags1 *pt, const yaffs_ExtendedTags *t)
+ {
+ 	pt->chunkId = t->chunkId;
+ 	pt->serialNumber = t->serialNumber;
+@@ -27,7 +27,7 @@ void yaffs_PackTags1(yaffs_PackedTags1 *
+ 
+ }
+ 
+-void yaffs_UnpackTags1(yaffs_ExtendedTags * t, const yaffs_PackedTags1 * pt)
++void yaffs_UnpackTags1(yaffs_ExtendedTags *t, const yaffs_PackedTags1 *pt)
+ {
+ 	static const __u8 allFF[] =
+ 	    { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+@@ -35,9 +35,8 @@ void yaffs_UnpackTags1(yaffs_ExtendedTag
+ 
+ 	if (memcmp(allFF, pt, sizeof(yaffs_PackedTags1))) {
+ 		t->blockBad = 0;
+-		if (pt->shouldBeFF != 0xFFFFFFFF) {
++		if (pt->shouldBeFF != 0xFFFFFFFF)
+ 			t->blockBad = 1;
+-		}
+ 		t->chunkUsed = 1;
+ 		t->objectId = pt->objectId;
+ 		t->chunkId = pt->chunkId;
+@@ -47,6 +46,5 @@ void yaffs_UnpackTags1(yaffs_ExtendedTag
+ 		t->serialNumber = pt->serialNumber;
+ 	} else {
+ 		memset(t, 0, sizeof(yaffs_ExtendedTags));
+-
+ 	}
+ }
+--- a/fs/yaffs2/yaffs_packedtags1.h
++++ b/fs/yaffs2/yaffs_packedtags1.h
+@@ -32,6 +32,6 @@ typedef struct {
+ 
+ } yaffs_PackedTags1;
+ 
+-void yaffs_PackTags1(yaffs_PackedTags1 * pt, const yaffs_ExtendedTags * t);
+-void yaffs_UnpackTags1(yaffs_ExtendedTags * t, const yaffs_PackedTags1 * pt);
++void yaffs_PackTags1(yaffs_PackedTags1 *pt, const yaffs_ExtendedTags *t);
++void yaffs_UnpackTags1(yaffs_ExtendedTags *t, const yaffs_PackedTags1 *pt);
+ #endif
+--- a/fs/yaffs2/yaffs_packedtags2.c
++++ b/fs/yaffs2/yaffs_packedtags2.c
+@@ -37,60 +37,68 @@
+ #define EXTRA_OBJECT_TYPE_SHIFT (28)
+ #define EXTRA_OBJECT_TYPE_MASK  ((0x0F) << EXTRA_OBJECT_TYPE_SHIFT)
+ 
+-static void yaffs_DumpPackedTags2(const yaffs_PackedTags2 * pt)
++
++static void yaffs_DumpPackedTags2TagsPart(const yaffs_PackedTags2TagsPart *ptt)
+ {
+ 	T(YAFFS_TRACE_MTD,
+ 	  (TSTR("packed tags obj %d chunk %d byte %d seq %d" TENDSTR),
+-	   pt->t.objectId, pt->t.chunkId, pt->t.byteCount,
+-	   pt->t.sequenceNumber));
++	   ptt->objectId, ptt->chunkId, ptt->byteCount,
++	   ptt->sequenceNumber));
++}
++static void yaffs_DumpPackedTags2(const yaffs_PackedTags2 *pt)
++{
++	yaffs_DumpPackedTags2TagsPart(&pt->t);
+ }
+ 
+-static void yaffs_DumpTags2(const yaffs_ExtendedTags * t)
++static void yaffs_DumpTags2(const yaffs_ExtendedTags *t)
+ {
+ 	T(YAFFS_TRACE_MTD,
+ 	  (TSTR
+-	   ("ext.tags eccres %d blkbad %d chused %d obj %d chunk%d byte "
+-	    "%d del %d ser %d seq %d"
++	   ("ext.tags eccres %d blkbad %d chused %d obj %d chunk%d byte %d del %d ser %d seq %d"
+ 	    TENDSTR), t->eccResult, t->blockBad, t->chunkUsed, t->objectId,
+ 	   t->chunkId, t->byteCount, t->chunkDeleted, t->serialNumber,
+ 	   t->sequenceNumber));
+ 
+ }
+ 
+-void yaffs_PackTags2(yaffs_PackedTags2 * pt, const yaffs_ExtendedTags * t)
++void yaffs_PackTags2TagsPart(yaffs_PackedTags2TagsPart *ptt,
++		const yaffs_ExtendedTags *t)
+ {
+-	pt->t.chunkId = t->chunkId;
+-	pt->t.sequenceNumber = t->sequenceNumber;
+-	pt->t.byteCount = t->byteCount;
+-	pt->t.objectId = t->objectId;
++	ptt->chunkId = t->chunkId;
++	ptt->sequenceNumber = t->sequenceNumber;
++	ptt->byteCount = t->byteCount;
++	ptt->objectId = t->objectId;
+ 
+ 	if (t->chunkId == 0 && t->extraHeaderInfoAvailable) {
+ 		/* Store the extra header info instead */
+ 		/* We save the parent object in the chunkId */
+-		pt->t.chunkId = EXTRA_HEADER_INFO_FLAG
++		ptt->chunkId = EXTRA_HEADER_INFO_FLAG
+ 			| t->extraParentObjectId;
+-		if (t->extraIsShrinkHeader) {
+-			pt->t.chunkId |= EXTRA_SHRINK_FLAG;
+-		}
+-		if (t->extraShadows) {
+-			pt->t.chunkId |= EXTRA_SHADOWS_FLAG;
+-		}
++		if (t->extraIsShrinkHeader)
++			ptt->chunkId |= EXTRA_SHRINK_FLAG;
++		if (t->extraShadows)
++			ptt->chunkId |= EXTRA_SHADOWS_FLAG;
+ 
+-		pt->t.objectId &= ~EXTRA_OBJECT_TYPE_MASK;
+-		pt->t.objectId |=
++		ptt->objectId &= ~EXTRA_OBJECT_TYPE_MASK;
++		ptt->objectId |=
+ 		    (t->extraObjectType << EXTRA_OBJECT_TYPE_SHIFT);
+ 
+-		if (t->extraObjectType == YAFFS_OBJECT_TYPE_HARDLINK) {
+-			pt->t.byteCount = t->extraEquivalentObjectId;
+-		} else if (t->extraObjectType == YAFFS_OBJECT_TYPE_FILE) {
+-			pt->t.byteCount = t->extraFileLength;
+-		} else {
+-			pt->t.byteCount = 0;
+-		}
++		if (t->extraObjectType == YAFFS_OBJECT_TYPE_HARDLINK)
++			ptt->byteCount = t->extraEquivalentObjectId;
++		else if (t->extraObjectType == YAFFS_OBJECT_TYPE_FILE)
++			ptt->byteCount = t->extraFileLength;
++		else
++			ptt->byteCount = 0;
+ 	}
+ 
+-	yaffs_DumpPackedTags2(pt);
++	yaffs_DumpPackedTags2TagsPart(ptt);
+ 	yaffs_DumpTags2(t);
++}
++
++
++void yaffs_PackTags2(yaffs_PackedTags2 *pt, const yaffs_ExtendedTags *t)
++{
++	yaffs_PackTags2TagsPart(&pt->t, t);
+ 
+ #ifndef YAFFS_IGNORE_TAGS_ECC
+ 	{
+@@ -101,82 +109,98 @@ void yaffs_PackTags2(yaffs_PackedTags2 *
+ #endif
+ }
+ 
+-void yaffs_UnpackTags2(yaffs_ExtendedTags * t, yaffs_PackedTags2 * pt)
++
++void yaffs_UnpackTags2TagsPart(yaffs_ExtendedTags *t,
++		yaffs_PackedTags2TagsPart *ptt)
+ {
+ 
+ 	memset(t, 0, sizeof(yaffs_ExtendedTags));
+ 
+ 	yaffs_InitialiseTags(t);
+ 
+-	if (pt->t.sequenceNumber != 0xFFFFFFFF) {
+-		/* Page is in use */
+-#ifdef YAFFS_IGNORE_TAGS_ECC
+-		{
+-			t->eccResult = YAFFS_ECC_RESULT_NO_ERROR;
+-		}
+-#else
+-		{
+-			yaffs_ECCOther ecc;
+-			int result;
+-			yaffs_ECCCalculateOther((unsigned char *)&pt->t,
+-						sizeof
+-						(yaffs_PackedTags2TagsPart),
+-						&ecc);
+-			result =
+-			    yaffs_ECCCorrectOther((unsigned char *)&pt->t,
+-						  sizeof
+-						  (yaffs_PackedTags2TagsPart),
+-						  &pt->ecc, &ecc);
+-			switch(result){
+-				case 0:
+-					t->eccResult = YAFFS_ECC_RESULT_NO_ERROR;
+-					break;
+-				case 1:
+-					t->eccResult = YAFFS_ECC_RESULT_FIXED;
+-					break;
+-				case -1:
+-					t->eccResult = YAFFS_ECC_RESULT_UNFIXED;
+-					break;
+-				default:
+-					t->eccResult = YAFFS_ECC_RESULT_UNKNOWN;
+-			}
+-		}
+-#endif
++	if (ptt->sequenceNumber != 0xFFFFFFFF) {
+ 		t->blockBad = 0;
+ 		t->chunkUsed = 1;
+-		t->objectId = pt->t.objectId;
+-		t->chunkId = pt->t.chunkId;
+-		t->byteCount = pt->t.byteCount;
++		t->objectId = ptt->objectId;
++		t->chunkId = ptt->chunkId;
++		t->byteCount = ptt->byteCount;
+ 		t->chunkDeleted = 0;
+ 		t->serialNumber = 0;
+-		t->sequenceNumber = pt->t.sequenceNumber;
++		t->sequenceNumber = ptt->sequenceNumber;
+ 
+ 		/* Do extra header info stuff */
+ 
+-		if (pt->t.chunkId & EXTRA_HEADER_INFO_FLAG) {
++		if (ptt->chunkId & EXTRA_HEADER_INFO_FLAG) {
+ 			t->chunkId = 0;
+ 			t->byteCount = 0;
+ 
+ 			t->extraHeaderInfoAvailable = 1;
+ 			t->extraParentObjectId =
+-			    pt->t.chunkId & (~(ALL_EXTRA_FLAGS));
++			    ptt->chunkId & (~(ALL_EXTRA_FLAGS));
+ 			t->extraIsShrinkHeader =
+-			    (pt->t.chunkId & EXTRA_SHRINK_FLAG) ? 1 : 0;
++			    (ptt->chunkId & EXTRA_SHRINK_FLAG) ? 1 : 0;
+ 			t->extraShadows =
+-			    (pt->t.chunkId & EXTRA_SHADOWS_FLAG) ? 1 : 0;
++			    (ptt->chunkId & EXTRA_SHADOWS_FLAG) ? 1 : 0;
+ 			t->extraObjectType =
+-			    pt->t.objectId >> EXTRA_OBJECT_TYPE_SHIFT;
++			    ptt->objectId >> EXTRA_OBJECT_TYPE_SHIFT;
+ 			t->objectId &= ~EXTRA_OBJECT_TYPE_MASK;
+ 
+-			if (t->extraObjectType == YAFFS_OBJECT_TYPE_HARDLINK) {
+-				t->extraEquivalentObjectId = pt->t.byteCount;
+-			} else {
+-				t->extraFileLength = pt->t.byteCount;
++			if (t->extraObjectType == YAFFS_OBJECT_TYPE_HARDLINK)
++				t->extraEquivalentObjectId = ptt->byteCount;
++			else
++				t->extraFileLength = ptt->byteCount;
++		}
++	}
++
++	yaffs_DumpPackedTags2TagsPart(ptt);
++	yaffs_DumpTags2(t);
++
++}
++
++
++void yaffs_UnpackTags2(yaffs_ExtendedTags *t, yaffs_PackedTags2 *pt)
++{
++
++	yaffs_ECCResult eccResult = YAFFS_ECC_RESULT_NO_ERROR;
++
++	if (pt->t.sequenceNumber != 0xFFFFFFFF) {
++		/* Page is in use */
++#ifndef YAFFS_IGNORE_TAGS_ECC
++		{
++			yaffs_ECCOther ecc;
++			int result;
++			yaffs_ECCCalculateOther((unsigned char *)&pt->t,
++						sizeof
++						(yaffs_PackedTags2TagsPart),
++						&ecc);
++			result =
++			    yaffs_ECCCorrectOther((unsigned char *)&pt->t,
++						  sizeof
++						  (yaffs_PackedTags2TagsPart),
++						  &pt->ecc, &ecc);
++			switch (result) {
++			case 0:
++				eccResult = YAFFS_ECC_RESULT_NO_ERROR;
++				break;
++			case 1:
++				eccResult = YAFFS_ECC_RESULT_FIXED;
++				break;
++			case -1:
++				eccResult = YAFFS_ECC_RESULT_UNFIXED;
++				break;
++			default:
++				eccResult = YAFFS_ECC_RESULT_UNKNOWN;
+ 			}
+ 		}
++#endif
+ 	}
+ 
++	yaffs_UnpackTags2TagsPart(t, &pt->t);
++
++	t->eccResult = eccResult;
++
+ 	yaffs_DumpPackedTags2(pt);
+ 	yaffs_DumpTags2(t);
+ 
+ }
++
+--- a/fs/yaffs2/yaffs_packedtags2.h
++++ b/fs/yaffs2/yaffs_packedtags2.h
+@@ -33,6 +33,11 @@ typedef struct {
+ 	yaffs_ECCOther ecc;
+ } yaffs_PackedTags2;
+ 
+-void yaffs_PackTags2(yaffs_PackedTags2 * pt, const yaffs_ExtendedTags * t);
+-void yaffs_UnpackTags2(yaffs_ExtendedTags * t, yaffs_PackedTags2 * pt);
++/* Full packed tags with ECC, used for oob tags */
++void yaffs_PackTags2(yaffs_PackedTags2 *pt, const yaffs_ExtendedTags *t);
++void yaffs_UnpackTags2(yaffs_ExtendedTags *t, yaffs_PackedTags2 *pt);
++
++/* Only the tags part (no ECC for use with inband tags */
++void yaffs_PackTags2TagsPart(yaffs_PackedTags2TagsPart *pt, const yaffs_ExtendedTags *t);
++void yaffs_UnpackTags2TagsPart(yaffs_ExtendedTags *t, yaffs_PackedTags2TagsPart *pt);
+ #endif
+--- a/fs/yaffs2/yaffs_qsort.c
++++ b/fs/yaffs2/yaffs_qsort.c
+@@ -28,12 +28,12 @@
+  */
+ 
+ #include "yportenv.h"
+-//#include <linux/string.h>
++/* #include <linux/string.h> */
+ 
+ /*
+  * Qsort routine from Bentley & McIlroy's "Engineering a Sort Function".
+  */
+-#define swapcode(TYPE, parmi, parmj, n) { 		\
++#define swapcode(TYPE, parmi, parmj, n) do { 		\
+ 	long i = (n) / sizeof (TYPE); 			\
+ 	register TYPE *pi = (TYPE *) (parmi); 		\
+ 	register TYPE *pj = (TYPE *) (parmj); 		\
+@@ -41,28 +41,29 @@
+ 		register TYPE	t = *pi;		\
+ 		*pi++ = *pj;				\
+ 		*pj++ = t;				\
+-        } while (--i > 0);				\
+-}
++	} while (--i > 0);				\
++} while (0)
+ 
+ #define SWAPINIT(a, es) swaptype = ((char *)a - (char *)0) % sizeof(long) || \
+-	es % sizeof(long) ? 2 : es == sizeof(long)? 0 : 1;
++	es % sizeof(long) ? 2 : es == sizeof(long) ? 0 : 1;
+ 
+ static __inline void
+ swapfunc(char *a, char *b, int n, int swaptype)
+ {
+ 	if (swaptype <= 1)
+-		swapcode(long, a, b, n)
++		swapcode(long, a, b, n);
+ 	else
+-		swapcode(char, a, b, n)
++		swapcode(char, a, b, n);
+ }
+ 
+-#define swap(a, b)					\
++#define yswap(a, b) do {					\
+ 	if (swaptype == 0) {				\
+ 		long t = *(long *)(a);			\
+ 		*(long *)(a) = *(long *)(b);		\
+ 		*(long *)(b) = t;			\
+ 	} else						\
+-		swapfunc(a, b, es, swaptype)
++		swapfunc(a, b, es, swaptype);		\
++} while (0)
+ 
+ #define vecswap(a, b, n) 	if ((n) > 0) swapfunc(a, b, n, swaptype)
+ 
+@@ -70,12 +71,12 @@ static __inline char *
+ med3(char *a, char *b, char *c, int (*cmp)(const void *, const void *))
+ {
+ 	return cmp(a, b) < 0 ?
+-	       (cmp(b, c) < 0 ? b : (cmp(a, c) < 0 ? c : a ))
+-              :(cmp(b, c) > 0 ? b : (cmp(a, c) < 0 ? a : c ));
++		(cmp(b, c) < 0 ? b : (cmp(a, c) < 0 ? c : a))
++		: (cmp(b, c) > 0 ? b : (cmp(a, c) < 0 ? a : c));
+ }
+ 
+ #ifndef min
+-#define min(a,b) (((a) < (b)) ? (a) : (b))
++#define min(a, b) (((a) < (b)) ? (a) : (b))
+ #endif
+ 
+ void
+@@ -92,7 +93,7 @@ loop:	SWAPINIT(a, es);
+ 		for (pm = (char *)a + es; pm < (char *) a + n * es; pm += es)
+ 			for (pl = pm; pl > (char *) a && cmp(pl - es, pl) > 0;
+ 			     pl -= es)
+-				swap(pl, pl - es);
++				yswap(pl, pl - es);
+ 		return;
+ 	}
+ 	pm = (char *)a + (n / 2) * es;
+@@ -107,7 +108,7 @@ loop:	SWAPINIT(a, es);
+ 		}
+ 		pm = med3(pl, pm, pn, cmp);
+ 	}
+-	swap(a, pm);
++	yswap(a, pm);
+ 	pa = pb = (char *)a + es;
+ 
+ 	pc = pd = (char *)a + (n - 1) * es;
+@@ -115,7 +116,7 @@ loop:	SWAPINIT(a, es);
+ 		while (pb <= pc && (r = cmp(pb, a)) <= 0) {
+ 			if (r == 0) {
+ 				swap_cnt = 1;
+-				swap(pa, pb);
++				yswap(pa, pb);
+ 				pa += es;
+ 			}
+ 			pb += es;
+@@ -123,14 +124,14 @@ loop:	SWAPINIT(a, es);
+ 		while (pb <= pc && (r = cmp(pc, a)) >= 0) {
+ 			if (r == 0) {
+ 				swap_cnt = 1;
+-				swap(pc, pd);
++				yswap(pc, pd);
+ 				pd -= es;
+ 			}
+ 			pc -= es;
+ 		}
+ 		if (pb > pc)
+ 			break;
+-		swap(pb, pc);
++		yswap(pb, pc);
+ 		swap_cnt = 1;
+ 		pb += es;
+ 		pc -= es;
+@@ -139,7 +140,7 @@ loop:	SWAPINIT(a, es);
+ 		for (pm = (char *) a + es; pm < (char *) a + n * es; pm += es)
+ 			for (pl = pm; pl > (char *) a && cmp(pl - es, pl) > 0;
+ 			     pl -= es)
+-				swap(pl, pl - es);
++				yswap(pl, pl - es);
+ 		return;
+ 	}
+ 
+@@ -148,9 +149,11 @@ loop:	SWAPINIT(a, es);
+ 	vecswap(a, pb - r, r);
+ 	r = min((long)(pd - pc), (long)(pn - pd - es));
+ 	vecswap(pb, pn - r, r);
+-	if ((r = pb - pa) > es)
++	r = pb - pa;
++	if (r > es)
+ 		yaffs_qsort(a, r / es, es, cmp);
+-	if ((r = pd - pc) > es) {
++	r = pd - pc;
++	if (r > es) {
+ 		/* Iterate rather than recurse to save stack space */
+ 		a = pn - r;
+ 		n = r / es;
+--- a/fs/yaffs2/yaffs_qsort.h
++++ b/fs/yaffs2/yaffs_qsort.h
+@@ -17,7 +17,7 @@
+ #ifndef __YAFFS_QSORT_H__
+ #define __YAFFS_QSORT_H__
+ 
+-extern void yaffs_qsort (void *const base, size_t total_elems, size_t size,
+-                   int (*cmp)(const void *, const void *));
++extern void yaffs_qsort(void *const base, size_t total_elems, size_t size,
++			int (*cmp)(const void *, const void *));
+ 
+ #endif
+--- a/fs/yaffs2/yaffs_tagscompat.c
++++ b/fs/yaffs2/yaffs_tagscompat.c
+@@ -14,16 +14,17 @@
+ #include "yaffs_guts.h"
+ #include "yaffs_tagscompat.h"
+ #include "yaffs_ecc.h"
++#include "yaffs_getblockinfo.h"
+ 
+-static void yaffs_HandleReadDataError(yaffs_Device * dev, int chunkInNAND);
++static void yaffs_HandleReadDataError(yaffs_Device *dev, int chunkInNAND);
+ #ifdef NOTYET
+-static void yaffs_CheckWrittenBlock(yaffs_Device * dev, int chunkInNAND);
+-static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+-				     const __u8 * data,
+-				     const yaffs_Spare * spare);
+-static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+-				    const yaffs_Spare * spare);
+-static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND);
++static void yaffs_CheckWrittenBlock(yaffs_Device *dev, int chunkInNAND);
++static void yaffs_HandleWriteChunkOk(yaffs_Device *dev, int chunkInNAND,
++				     const __u8 *data,
++				     const yaffs_Spare *spare);
++static void yaffs_HandleUpdateChunk(yaffs_Device *dev, int chunkInNAND,
++				    const yaffs_Spare *spare);
++static void yaffs_HandleWriteChunkError(yaffs_Device *dev, int chunkInNAND);
+ #endif
+ 
+ static const char yaffs_countBitsTable[256] = {
+@@ -54,13 +55,13 @@ int yaffs_CountBits(__u8 x)
+ 
+ /********** Tags ECC calculations  *********/
+ 
+-void yaffs_CalcECC(const __u8 * data, yaffs_Spare * spare)
++void yaffs_CalcECC(const __u8 *data, yaffs_Spare *spare)
+ {
+ 	yaffs_ECCCalculate(data, spare->ecc1);
+ 	yaffs_ECCCalculate(&data[256], spare->ecc2);
+ }
+ 
+-void yaffs_CalcTagsECC(yaffs_Tags * tags)
++void yaffs_CalcTagsECC(yaffs_Tags *tags)
+ {
+ 	/* Calculate an ecc */
+ 
+@@ -74,9 +75,8 @@ void yaffs_CalcTagsECC(yaffs_Tags * tags
+ 	for (i = 0; i < 8; i++) {
+ 		for (j = 1; j & 0xff; j <<= 1) {
+ 			bit++;
+-			if (b[i] & j) {
++			if (b[i] & j)
+ 				ecc ^= bit;
+-			}
+ 		}
+ 	}
+ 
+@@ -84,7 +84,7 @@ void yaffs_CalcTagsECC(yaffs_Tags * tags
+ 
+ }
+ 
+-int yaffs_CheckECCOnTags(yaffs_Tags * tags)
++int yaffs_CheckECCOnTags(yaffs_Tags *tags)
+ {
+ 	unsigned ecc = tags->ecc;
+ 
+@@ -115,8 +115,8 @@ int yaffs_CheckECCOnTags(yaffs_Tags * ta
+ 
+ /********** Tags **********/
+ 
+-static void yaffs_LoadTagsIntoSpare(yaffs_Spare * sparePtr,
+-				    yaffs_Tags * tagsPtr)
++static void yaffs_LoadTagsIntoSpare(yaffs_Spare *sparePtr,
++				yaffs_Tags *tagsPtr)
+ {
+ 	yaffs_TagsUnion *tu = (yaffs_TagsUnion *) tagsPtr;
+ 
+@@ -132,8 +132,8 @@ static void yaffs_LoadTagsIntoSpare(yaff
+ 	sparePtr->tagByte7 = tu->asBytes[7];
+ }
+ 
+-static void yaffs_GetTagsFromSpare(yaffs_Device * dev, yaffs_Spare * sparePtr,
+-				   yaffs_Tags * tagsPtr)
++static void yaffs_GetTagsFromSpare(yaffs_Device *dev, yaffs_Spare *sparePtr,
++				yaffs_Tags *tagsPtr)
+ {
+ 	yaffs_TagsUnion *tu = (yaffs_TagsUnion *) tagsPtr;
+ 	int result;
+@@ -148,21 +148,20 @@ static void yaffs_GetTagsFromSpare(yaffs
+ 	tu->asBytes[7] = sparePtr->tagByte7;
+ 
+ 	result = yaffs_CheckECCOnTags(tagsPtr);
+-	if (result > 0) {
++	if (result > 0)
+ 		dev->tagsEccFixed++;
+-	} else if (result < 0) {
++	else if (result < 0)
+ 		dev->tagsEccUnfixed++;
+-	}
+ }
+ 
+-static void yaffs_SpareInitialise(yaffs_Spare * spare)
++static void yaffs_SpareInitialise(yaffs_Spare *spare)
+ {
+ 	memset(spare, 0xFF, sizeof(yaffs_Spare));
+ }
+ 
+ static int yaffs_WriteChunkToNAND(struct yaffs_DeviceStruct *dev,
+-				  int chunkInNAND, const __u8 * data,
+-				  yaffs_Spare * spare)
++				int chunkInNAND, const __u8 *data,
++				yaffs_Spare *spare)
+ {
+ 	if (chunkInNAND < dev->startBlock * dev->nChunksPerBlock) {
+ 		T(YAFFS_TRACE_ERROR,
+@@ -177,9 +176,9 @@ static int yaffs_WriteChunkToNAND(struct
+ 
+ static int yaffs_ReadChunkFromNAND(struct yaffs_DeviceStruct *dev,
+ 				   int chunkInNAND,
+-				   __u8 * data,
+-				   yaffs_Spare * spare,
+-				   yaffs_ECCResult * eccResult,
++				   __u8 *data,
++				   yaffs_Spare *spare,
++				   yaffs_ECCResult *eccResult,
+ 				   int doErrorCorrection)
+ {
+ 	int retVal;
+@@ -252,9 +251,11 @@ static int yaffs_ReadChunkFromNAND(struc
+ 		/* Must allocate enough memory for spare+2*sizeof(int) */
+ 		/* for ecc results from device. */
+ 		struct yaffs_NANDSpare nspare;
+-		retVal =
+-		    dev->readChunkFromNAND(dev, chunkInNAND, data,
+-					   (yaffs_Spare *) & nspare);
++
++		memset(&nspare, 0, sizeof(nspare));
++
++		retVal = dev->readChunkFromNAND(dev, chunkInNAND, data,
++					(yaffs_Spare *) &nspare);
+ 		memcpy(spare, &nspare, sizeof(yaffs_Spare));
+ 		if (data && doErrorCorrection) {
+ 			if (nspare.eccres1 > 0) {
+@@ -302,8 +303,7 @@ static int yaffs_ReadChunkFromNAND(struc
+ static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev,
+ 				  int chunkInNAND)
+ {
+-
+-	static int init = 0;
++	static int init;
+ 	static __u8 cmpbuf[YAFFS_BYTES_PER_CHUNK];
+ 	static __u8 data[YAFFS_BYTES_PER_CHUNK];
+ 	/* Might as well always allocate the larger size for */
+@@ -331,12 +331,12 @@ static int yaffs_CheckChunkErased(struct
+  * Functions for robustisizing
+  */
+ 
+-static void yaffs_HandleReadDataError(yaffs_Device * dev, int chunkInNAND)
++static void yaffs_HandleReadDataError(yaffs_Device *dev, int chunkInNAND)
+ {
+ 	int blockInNAND = chunkInNAND / dev->nChunksPerBlock;
+ 
+ 	/* Mark the block for retirement */
+-	yaffs_GetBlockInfo(dev, blockInNAND)->needsRetiring = 1;
++	yaffs_GetBlockInfo(dev, blockInNAND + dev->blockOffset)->needsRetiring = 1;
+ 	T(YAFFS_TRACE_ERROR | YAFFS_TRACE_BAD_BLOCKS,
+ 	  (TSTR("**>>Block %d marked for retirement" TENDSTR), blockInNAND));
+ 
+@@ -348,22 +348,22 @@ static void yaffs_HandleReadDataError(ya
+ }
+ 
+ #ifdef NOTYET
+-static void yaffs_CheckWrittenBlock(yaffs_Device * dev, int chunkInNAND)
++static void yaffs_CheckWrittenBlock(yaffs_Device *dev, int chunkInNAND)
+ {
+ }
+ 
+-static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+-				     const __u8 * data,
+-				     const yaffs_Spare * spare)
++static void yaffs_HandleWriteChunkOk(yaffs_Device *dev, int chunkInNAND,
++				     const __u8 *data,
++				     const yaffs_Spare *spare)
+ {
+ }
+ 
+-static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+-				    const yaffs_Spare * spare)
++static void yaffs_HandleUpdateChunk(yaffs_Device *dev, int chunkInNAND,
++				    const yaffs_Spare *spare)
+ {
+ }
+ 
+-static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND)
++static void yaffs_HandleWriteChunkError(yaffs_Device *dev, int chunkInNAND)
+ {
+ 	int blockInNAND = chunkInNAND / dev->nChunksPerBlock;
+ 
+@@ -373,8 +373,8 @@ static void yaffs_HandleWriteChunkError(
+ 	yaffs_DeleteChunk(dev, chunkInNAND, 1, __LINE__);
+ }
+ 
+-static int yaffs_VerifyCompare(const __u8 * d0, const __u8 * d1,
+-			       const yaffs_Spare * s0, const yaffs_Spare * s1)
++static int yaffs_VerifyCompare(const __u8 *d0, const __u8 *d1,
++			       const yaffs_Spare *s0, const yaffs_Spare *s1)
+ {
+ 
+ 	if (memcmp(d0, d1, YAFFS_BYTES_PER_CHUNK) != 0 ||
+@@ -398,28 +398,35 @@ static int yaffs_VerifyCompare(const __u
+ }
+ #endif				/* NOTYET */
+ 
+-int yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(yaffs_Device * dev,
+-						    int chunkInNAND,
+-						    const __u8 * data,
+-						    const yaffs_ExtendedTags *
+-						    eTags)
++int yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(yaffs_Device *dev,
++						int chunkInNAND,
++						const __u8 *data,
++						const yaffs_ExtendedTags *eTags)
+ {
+ 	yaffs_Spare spare;
+ 	yaffs_Tags tags;
+ 
+ 	yaffs_SpareInitialise(&spare);
+ 
+-	if (eTags->chunkDeleted) {
++	if (eTags->chunkDeleted)
+ 		spare.pageStatus = 0;
+-	} else {
++	else {
+ 		tags.objectId = eTags->objectId;
+ 		tags.chunkId = eTags->chunkId;
+-		tags.byteCount = eTags->byteCount;
++
++		tags.byteCountLSB = eTags->byteCount & 0x3ff;
++
++		if (dev->nDataBytesPerChunk >= 1024)
++			tags.byteCountMSB = (eTags->byteCount >> 10) & 3;
++		else
++			tags.byteCountMSB = 3;
++
++
+ 		tags.serialNumber = eTags->serialNumber;
+ 
+-		if (!dev->useNANDECC && data) {
++		if (!dev->useNANDECC && data)
+ 			yaffs_CalcECC(data, &spare);
+-		}
++
+ 		yaffs_LoadTagsIntoSpare(&spare, &tags);
+ 
+ 	}
+@@ -427,15 +434,15 @@ int yaffs_TagsCompatabilityWriteChunkWit
+ 	return yaffs_WriteChunkToNAND(dev, chunkInNAND, data, &spare);
+ }
+ 
+-int yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(yaffs_Device * dev,
++int yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(yaffs_Device *dev,
+ 						     int chunkInNAND,
+-						     __u8 * data,
+-						     yaffs_ExtendedTags * eTags)
++						     __u8 *data,
++						     yaffs_ExtendedTags *eTags)
+ {
+ 
+ 	yaffs_Spare spare;
+ 	yaffs_Tags tags;
+-	yaffs_ECCResult eccResult;
++	yaffs_ECCResult eccResult = YAFFS_ECC_RESULT_UNKNOWN;
+ 
+ 	static yaffs_Spare spareFF;
+ 	static int init;
+@@ -466,7 +473,11 @@ int yaffs_TagsCompatabilityReadChunkWith
+ 
+ 				eTags->objectId = tags.objectId;
+ 				eTags->chunkId = tags.chunkId;
+-				eTags->byteCount = tags.byteCount;
++				eTags->byteCount = tags.byteCountLSB;
++
++				if (dev->nDataBytesPerChunk >= 1024)
++					eTags->byteCount |= (((unsigned) tags.byteCountMSB) << 10);
++
+ 				eTags->serialNumber = tags.serialNumber;
+ 			}
+ 		}
+@@ -497,9 +508,9 @@ int yaffs_TagsCompatabilityMarkNANDBlock
+ }
+ 
+ int yaffs_TagsCompatabilityQueryNANDBlock(struct yaffs_DeviceStruct *dev,
+-					  int blockNo, yaffs_BlockState *
+-					  state,
+-					  int *sequenceNumber)
++					  int blockNo,
++					  yaffs_BlockState *state,
++					  __u32 *sequenceNumber)
+ {
+ 
+ 	yaffs_Spare spare0, spare1;
+--- a/fs/yaffs2/yaffs_tagscompat.h
++++ b/fs/yaffs2/yaffs_tagscompat.h
+@@ -17,24 +17,23 @@
+ #define __YAFFS_TAGSCOMPAT_H__
+ 
+ #include "yaffs_guts.h"
+-int yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(yaffs_Device * dev,
+-						    int chunkInNAND,
+-						    const __u8 * data,
+-						    const yaffs_ExtendedTags *
+-						    tags);
+-int yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(yaffs_Device * dev,
+-						     int chunkInNAND,
+-						     __u8 * data,
+-						     yaffs_ExtendedTags *
+-						     tags);
++int yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(yaffs_Device *dev,
++						int chunkInNAND,
++						const __u8 *data,
++						const yaffs_ExtendedTags *tags);
++int yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(yaffs_Device *dev,
++						int chunkInNAND,
++						__u8 *data,
++						yaffs_ExtendedTags *tags);
+ int yaffs_TagsCompatabilityMarkNANDBlockBad(struct yaffs_DeviceStruct *dev,
+ 					    int blockNo);
+ int yaffs_TagsCompatabilityQueryNANDBlock(struct yaffs_DeviceStruct *dev,
+-					  int blockNo, yaffs_BlockState *
+-					  state, int *sequenceNumber);
++					  int blockNo,
++					  yaffs_BlockState *state,
++					  __u32 *sequenceNumber);
+ 
+-void yaffs_CalcTagsECC(yaffs_Tags * tags);
+-int yaffs_CheckECCOnTags(yaffs_Tags * tags);
++void yaffs_CalcTagsECC(yaffs_Tags *tags);
++int yaffs_CheckECCOnTags(yaffs_Tags *tags);
+ int yaffs_CountBits(__u8 byte);
+ 
+ #endif
+--- a/fs/yaffs2/yaffs_tagsvalidity.c
++++ b/fs/yaffs2/yaffs_tagsvalidity.c
+@@ -13,14 +13,14 @@
+ 
+ #include "yaffs_tagsvalidity.h"
+ 
+-void yaffs_InitialiseTags(yaffs_ExtendedTags * tags)
++void yaffs_InitialiseTags(yaffs_ExtendedTags *tags)
+ {
+ 	memset(tags, 0, sizeof(yaffs_ExtendedTags));
+ 	tags->validMarker0 = 0xAAAAAAAA;
+ 	tags->validMarker1 = 0x55555555;
+ }
+ 
+-int yaffs_ValidateTags(yaffs_ExtendedTags * tags)
++int yaffs_ValidateTags(yaffs_ExtendedTags *tags)
+ {
+ 	return (tags->validMarker0 == 0xAAAAAAAA &&
+ 		tags->validMarker1 == 0x55555555);
+--- a/fs/yaffs2/yaffs_tagsvalidity.h
++++ b/fs/yaffs2/yaffs_tagsvalidity.h
+@@ -19,6 +19,6 @@
+ 
+ #include "yaffs_guts.h"
+ 
+-void yaffs_InitialiseTags(yaffs_ExtendedTags * tags);
+-int yaffs_ValidateTags(yaffs_ExtendedTags * tags);
++void yaffs_InitialiseTags(yaffs_ExtendedTags *tags);
++int yaffs_ValidateTags(yaffs_ExtendedTags *tags);
+ #endif
+--- a/fs/yaffs2/yportenv.h
++++ b/fs/yaffs2/yportenv.h
+@@ -17,17 +17,28 @@
+ #ifndef __YPORTENV_H__
+ #define __YPORTENV_H__
+ 
++/*
++ * Define the MTD version in terms of Linux Kernel versions
++ * This allows yaffs to be used independantly of the kernel
++ * as well as with it.
++ */
++
++#define MTD_VERSION(a, b, c) (((a) << 16) + ((b) << 8) + (c))
++
+ #if defined CONFIG_YAFFS_WINCE
+ 
+ #include "ywinceenv.h"
+ 
+-#elif  defined __KERNEL__
++#elif defined __KERNEL__
+ 
+ #include "moduleconfig.h"
+ 
+ /* Linux kernel */
++
+ #include <linux/version.h>
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19))
++#define MTD_VERSION_CODE LINUX_VERSION_CODE
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 19))
+ #include <linux/config.h>
+ #endif
+ #include <linux/kernel.h>
+@@ -40,12 +51,13 @@
+ #define YCHAR char
+ #define YUCHAR unsigned char
+ #define _Y(x)     x
+-#define yaffs_strcpy(a,b)    strcpy(a,b)
+-#define yaffs_strncpy(a,b,c) strncpy(a,b,c)
+-#define yaffs_strncmp(a,b,c) strncmp(a,b,c)
+-#define yaffs_strlen(s)	     strlen(s)
+-#define yaffs_sprintf	     sprintf
+-#define yaffs_toupper(a)     toupper(a)
++#define yaffs_strcat(a, b)     strcat(a, b)
++#define yaffs_strcpy(a, b)     strcpy(a, b)
++#define yaffs_strncpy(a, b, c) strncpy(a, b, c)
++#define yaffs_strncmp(a, b, c) strncmp(a, b, c)
++#define yaffs_strlen(s)	       strlen(s)
++#define yaffs_sprintf	       sprintf
++#define yaffs_toupper(a)       toupper(a)
+ 
+ #define Y_INLINE inline
+ 
+@@ -53,19 +65,19 @@
+ #define YAFFS_LOSTNFOUND_PREFIX		"obj"
+ 
+ /* #define YPRINTF(x) printk x */
+-#define YMALLOC(x) kmalloc(x,GFP_KERNEL)
++#define YMALLOC(x) kmalloc(x, GFP_NOFS)
+ #define YFREE(x)   kfree(x)
+ #define YMALLOC_ALT(x) vmalloc(x)
+ #define YFREE_ALT(x)   vfree(x)
+ #define YMALLOC_DMA(x) YMALLOC(x)
+ 
+-// KR - added for use in scan so processes aren't blocked indefinitely.
++/* KR - added for use in scan so processes aren't blocked indefinitely. */
+ #define YYIELD() schedule()
+ 
+ #define YAFFS_ROOT_MODE			0666
+ #define YAFFS_LOSTNFOUND_MODE		0666
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ #define Y_CURRENT_TIME CURRENT_TIME.tv_sec
+ #define Y_TIME_CONVERT(x) (x).tv_sec
+ #else
+@@ -73,11 +85,12 @@
+ #define Y_TIME_CONVERT(x) (x)
+ #endif
+ 
+-#define yaffs_SumCompare(x,y) ((x) == (y))
+-#define yaffs_strcmp(a,b) strcmp(a,b)
++#define yaffs_SumCompare(x, y) ((x) == (y))
++#define yaffs_strcmp(a, b) strcmp(a, b)
+ 
+ #define TENDSTR "\n"
+ #define TSTR(x) KERN_WARNING x
++#define TCONT(x) x
+ #define TOUT(p) printk p
+ 
+ #define yaffs_trace(mask, fmt, args...) \
+@@ -90,6 +103,8 @@
+ 
+ #elif defined CONFIG_YAFFS_DIRECT
+ 
++#define MTD_VERSION_CODE MTD_VERSION(2, 6, 22)
++
+ /* Direct interface */
+ #include "ydirectenv.h"
+ 
+@@ -111,11 +126,12 @@
+ #define YCHAR char
+ #define YUCHAR unsigned char
+ #define _Y(x)     x
+-#define yaffs_strcpy(a,b)    strcpy(a,b)
+-#define yaffs_strncpy(a,b,c) strncpy(a,b,c)
+-#define yaffs_strlen(s)	     strlen(s)
+-#define yaffs_sprintf	     sprintf
+-#define yaffs_toupper(a)     toupper(a)
++#define yaffs_strcat(a, b)     strcat(a, b)
++#define yaffs_strcpy(a, b)     strcpy(a, b)
++#define yaffs_strncpy(a, b, c) strncpy(a, b, c)
++#define yaffs_strlen(s)	       strlen(s)
++#define yaffs_sprintf	       sprintf
++#define yaffs_toupper(a)       toupper(a)
+ 
+ #define Y_INLINE inline
+ 
+@@ -133,8 +149,8 @@
+ #define YAFFS_ROOT_MODE				0666
+ #define YAFFS_LOSTNFOUND_MODE		0666
+ 
+-#define yaffs_SumCompare(x,y) ((x) == (y))
+-#define yaffs_strcmp(a,b) strcmp(a,b)
++#define yaffs_SumCompare(x, y) ((x) == (y))
++#define yaffs_strcmp(a, b) strcmp(a, b)
+ 
+ #else
+ /* Should have specified a configuration type */
+@@ -178,10 +194,10 @@ extern unsigned int yaffs_wr_attempts;
+ #define YAFFS_TRACE_ALWAYS		0xF0000000
+ 
+ 
+-#define T(mask,p) do{ if((mask) & (yaffs_traceMask | YAFFS_TRACE_ALWAYS)) TOUT(p);} while(0)
++#define T(mask, p) do { if ((mask) & (yaffs_traceMask | YAFFS_TRACE_ALWAYS)) TOUT(p); } while (0)
+ 
+-#ifndef CONFIG_YAFFS_WINCE
+-#define YBUG() T(YAFFS_TRACE_BUG,(TSTR("==>> yaffs bug: " __FILE__ " %d" TENDSTR),__LINE__))
++#ifndef YBUG
++#define YBUG() do {T(YAFFS_TRACE_BUG, (TSTR("==>> yaffs bug: " __FILE__ " %d" TENDSTR), __LINE__)); } while (0)
+ #endif
+ 
+ #endif
diff --git a/target/linux/generic/patches-2.6.31/600-phy_extension.patch b/target/linux/generic/patches-2.6.31/600-phy_extension.patch
new file mode 100644
index 0000000000..473812895e
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/600-phy_extension.patch
@@ -0,0 +1,83 @@
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -299,6 +299,50 @@ int phy_ethtool_gset(struct phy_device *
+ }
+ EXPORT_SYMBOL(phy_ethtool_gset);
+ 
++int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr)
++{
++	u32 cmd;
++	int tmp;
++	struct ethtool_cmd ecmd = { ETHTOOL_GSET };
++	struct ethtool_value edata = { ETHTOOL_GLINK };
++
++	if (get_user(cmd, (u32 *) useraddr))
++		return -EFAULT;
++
++	switch (cmd) {
++	case ETHTOOL_GSET:
++		phy_ethtool_gset(phydev, &ecmd);
++		if (copy_to_user(useraddr, &ecmd, sizeof(ecmd)))
++			return -EFAULT;
++		return 0;
++
++	case ETHTOOL_SSET:
++		if (copy_from_user(&ecmd, useraddr, sizeof(ecmd)))
++			return -EFAULT;
++		return phy_ethtool_sset(phydev, &ecmd);
++
++	case ETHTOOL_NWAY_RST:
++		/* if autoneg is off, it's an error */
++		tmp = phy_read(phydev, MII_BMCR);
++		if (tmp & BMCR_ANENABLE) {
++			tmp |= (BMCR_ANRESTART);
++			phy_write(phydev, MII_BMCR, tmp);
++			return 0;
++		}
++		return -EINVAL;
++
++	case ETHTOOL_GLINK:
++		edata.data = (phy_read(phydev,
++				MII_BMSR) & BMSR_LSTATUS) ? 1 : 0;
++		if (copy_to_user(useraddr, &edata, sizeof(edata)))
++			return -EFAULT;
++		return 0;
++	}
++
++	return -EOPNOTSUPP;
++}
++EXPORT_SYMBOL(phy_ethtool_ioctl);
++
+ /**
+  * phy_mii_ioctl - generic PHY MII ioctl interface
+  * @phydev: the phy_device struct
+@@ -355,8 +399,8 @@ int phy_mii_ioctl(struct phy_device *phy
+ 		}
+ 
+ 		phy_write(phydev, mii_data->reg_num, val);
+-		
+-		if (mii_data->reg_num == MII_BMCR 
++
++		if (mii_data->reg_num == MII_BMCR
+ 				&& val & BMCR_RESET
+ 				&& phydev->drv->config_init) {
+ 			phy_scan_fixups(phydev);
+@@ -471,7 +515,7 @@ static void phy_force_reduction(struct p
+ 	int idx;
+ 
+ 	idx = phy_find_setting(phydev->speed, phydev->duplex);
+-	
++
+ 	idx++;
+ 
+ 	idx = phy_find_valid(idx, phydev->supported);
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -489,6 +489,7 @@ void phy_start_machine(struct phy_device
+ void phy_stop_machine(struct phy_device *phydev);
+ int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
+ int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
++int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr);
+ int phy_mii_ioctl(struct phy_device *phydev,
+ 		struct mii_ioctl_data *mii_data, int cmd);
+ int phy_start_interrupts(struct phy_device *phydev);
diff --git a/target/linux/generic/patches-2.6.31/601-phy-add-aneg-done-function.patch b/target/linux/generic/patches-2.6.31/601-phy-add-aneg-done-function.patch
new file mode 100644
index 0000000000..aac38ff2e7
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/601-phy-add-aneg-done-function.patch
@@ -0,0 +1,45 @@
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -393,9 +393,18 @@ struct phy_driver {
+ 	 */
+ 	int (*config_aneg)(struct phy_device *phydev);
+ 
++	/* Determine if autonegotiation is done */
++	int (*aneg_done)(struct phy_device *phydev);
++
+ 	/* Determines the negotiated speed and duplex */
+ 	int (*read_status)(struct phy_device *phydev);
+ 
++	/* 
++	 * Update the value in phydev->link to reflect the 
++	 * current link value
++	 */
++	int (*update_link)(struct phy_device *phydev);
++
+ 	/* Clears any pending interrupts */
+ 	int (*ack_interrupt)(struct phy_device *phydev);
+ 
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -695,6 +695,9 @@ int genphy_update_link(struct phy_device
+ {
+ 	int status;
+ 
++	if (phydev->drv->update_link)
++		return phydev->drv->update_link(phydev);
++
+ 	/* Do a fake read */
+ 	status = phy_read(phydev, MII_BMSR);
+ 
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -107,6 +107,9 @@ static inline int phy_aneg_done(struct p
+ {
+ 	int retval;
+ 
++	if (phydev->drv->aneg_done)
++		return phydev->drv->aneg_done(phydev);
++
+ 	retval = phy_read(phydev, MII_BMSR);
+ 
+ 	return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE);
diff --git a/target/linux/generic/patches-2.6.31/620-phy_adm6996.patch b/target/linux/generic/patches-2.6.31/620-phy_adm6996.patch
new file mode 100644
index 0000000000..8f61d95c2d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/620-phy_adm6996.patch
@@ -0,0 +1,24 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -82,6 +82,11 @@ config LSI_ET1011C_PHY
+ 	---help---
+ 	  Supports the LSI ET1011C PHY.
+ 
++config ADM6996_PHY
++	tristate "Driver for ADM6996 switches"
++	---help---
++	  Currently supports the ADM6996F switch
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -12,6 +12,7 @@ obj-$(CONFIG_SMSC_PHY)		+= smsc.o
+ obj-$(CONFIG_VITESSE_PHY)	+= vitesse.o
+ obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
+ obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
++obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
diff --git a/target/linux/generic/patches-2.6.31/630-phy_packets.patch b/target/linux/generic/patches-2.6.31/630-phy_packets.patch
new file mode 100644
index 0000000000..82f67bcee5
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/630-phy_packets.patch
@@ -0,0 +1,63 @@
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -146,6 +146,18 @@ int phy_scan_fixups(struct phy_device *p
+ }
+ EXPORT_SYMBOL(phy_scan_fixups);
+ 
++static int generic_receive_skb(struct sk_buff *skb)
++{
++	skb->protocol = eth_type_trans(skb, skb->dev);
++	return netif_receive_skb(skb);
++}
++
++static int generic_rx(struct sk_buff *skb)
++{
++	skb->protocol = eth_type_trans(skb, skb->dev);
++	return netif_rx(skb);
++}
++
+ struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
+ {
+ 	struct phy_device *dev;
+@@ -175,6 +187,8 @@ struct phy_device* phy_device_create(str
+ 	dev_set_name(&dev->dev, PHY_ID_FMT, bus->id, addr);
+ 
+ 	dev->state = PHY_DOWN;
++	dev->netif_receive_skb = &generic_receive_skb;
++	dev->netif_rx = &generic_rx;
+ 
+ 	mutex_init(&dev->lock);
+ 
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -325,6 +325,20 @@ struct phy_device {
+ 	void (*adjust_link)(struct net_device *dev);
+ 
+ 	void (*adjust_state)(struct net_device *dev);
++
++	/*
++	 * By default these point to the original functions
++	 * with the same name. adding them to the phy_device
++	 * allows the phy driver to override them for packet
++	 * mangling if the ethernet driver supports it
++	 * This is required to support some really horrible
++	 * switches such as the Marvell 88E6060
++	 */
++	int (*netif_receive_skb)(struct sk_buff *skb);
++	int (*netif_rx)(struct sk_buff *skb);
++
++	/* alignment offset for packets */
++	int pkt_align;
+ };
+ #define to_phy_device(d) container_of(d, struct phy_device, dev)
+ 
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -804,6 +804,7 @@ struct net_device
+ 	void			*ax25_ptr;	/* AX.25 specific data */
+ 	struct wireless_dev	*ieee80211_ptr;	/* IEEE 802.11 specific data,
+ 						   assign before registering */
++	void			*phy_ptr; /* PHY device specific data */
+ 
+ /*
+  * Cache line mostly used on receive path (including eth_type_trans())
diff --git a/target/linux/generic/patches-2.6.31/640-br2684_backport_routed.patch b/target/linux/generic/patches-2.6.31/640-br2684_backport_routed.patch
new file mode 100644
index 0000000000..1623e7f9b5
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/640-br2684_backport_routed.patch
@@ -0,0 +1,42 @@
+commit 2e302ebfeac04beb5a5d6af1ac583c6a1fb76d1a
+Author: chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
+Date:   Fri Dec 4 11:06:32 2009 +0000
+
+    atm: [br2684] allow routed mode operation again
+    
+    in routed mode, we don't have a hardware address so netdev_ops doesnt
+    need to validate our hardware address via .ndo_validate_addr
+    
+    Reported-by: Manuel Fuentes <mfuentes@agenciaefe.com>
+    Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
+    Signed-off-by: David S. Miller <davem@davemloft.net>
+
+--- a/net/atm/br2684.c
++++ b/net/atm/br2684.c
+@@ -536,6 +536,12 @@ static const struct net_device_ops br268
+ 	.ndo_validate_addr	= eth_validate_addr,
+ };
+ 
++static const struct net_device_ops br2684_netdev_ops_routed = {
++	.ndo_start_xmit 	= br2684_start_xmit,
++	.ndo_set_mac_address	= br2684_mac_addr,
++	.ndo_change_mtu		= eth_change_mtu
++};
++
+ static void br2684_setup(struct net_device *netdev)
+ {
+ 	struct br2684_dev *brdev = BRPRIV(netdev);
+@@ -551,11 +557,10 @@ static void br2684_setup(struct net_devi
+ static void br2684_setup_routed(struct net_device *netdev)
+ {
+ 	struct br2684_dev *brdev = BRPRIV(netdev);
+-	brdev->net_dev = netdev;
+ 
++	brdev->net_dev = netdev;
+ 	netdev->hard_header_len = 0;
+-
+-	netdev->netdev_ops = &br2684_netdev_ops;
++	netdev->netdev_ops = &br2684_netdev_ops_routed;
+ 	netdev->addr_len = 0;
+ 	netdev->mtu = 1500;
+ 	netdev->type = ARPHRD_PPP;
diff --git a/target/linux/generic/patches-2.6.31/650-swconfig.patch b/target/linux/generic/patches-2.6.31/650-swconfig.patch
new file mode 100644
index 0000000000..6825037ce9
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/650-swconfig.patch
@@ -0,0 +1,25 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -13,6 +13,12 @@ menuconfig PHYLIB
+ 
+ if PHYLIB
+ 
++config SWCONFIG
++	tristate "Switch configuration API"
++	---help---
++	  Switch configuration API using netlink. This allows
++	  you to configure the VLAN features of certain switches.
++
+ comment "MII PHY device drivers"
+ 
+ config MARVELL_PHY
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -3,6 +3,7 @@
+ libphy-objs			:= phy.o phy_device.o mdio_bus.o
+ 
+ obj-$(CONFIG_PHYLIB)		+= libphy.o
++obj-$(CONFIG_SWCONFIG)		+= swconfig.o
+ obj-$(CONFIG_MARVELL_PHY)	+= marvell.o
+ obj-$(CONFIG_DAVICOM_PHY)	+= davicom.o
+ obj-$(CONFIG_CICADA_PHY)	+= cicada.o
diff --git a/target/linux/generic/patches-2.6.31/660-phy_mvswitch.patch b/target/linux/generic/patches-2.6.31/660-phy_mvswitch.patch
new file mode 100644
index 0000000000..731f30301f
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/660-phy_mvswitch.patch
@@ -0,0 +1,22 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -93,6 +93,9 @@ config ADM6996_PHY
+ 	---help---
+ 	  Currently supports the ADM6996F switch
+ 
++config MVSWITCH_PHY
++	tristate "Driver for Marvell 88E6060 switches"
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -14,6 +14,7 @@ obj-$(CONFIG_VITESSE_PHY)	+= vitesse.o
+ obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
+ obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
+ obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
++obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
diff --git a/target/linux/generic/patches-2.6.31/670-phy_ip175c.patch b/target/linux/generic/patches-2.6.31/670-phy_ip175c.patch
new file mode 100644
index 0000000000..5d8ba3c622
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/670-phy_ip175c.patch
@@ -0,0 +1,23 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -96,6 +96,10 @@ config ADM6996_PHY
+ config MVSWITCH_PHY
+ 	tristate "Driver for Marvell 88E6060 switches"
+ 
++config IP17XX_PHY
++	tristate "Driver for IC+ IP17xx switches"
++	select SWCONFIG
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -15,6 +15,7 @@ obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
+ obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
+ obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
+ obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
++obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
diff --git a/target/linux/generic/patches-2.6.31/680-phy_ar8216.patch b/target/linux/generic/patches-2.6.31/680-phy_ar8216.patch
new file mode 100644
index 0000000000..d9d3ce7721
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/680-phy_ar8216.patch
@@ -0,0 +1,23 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -100,6 +100,10 @@ config IP175C_PHY
+ 	tristate "Driver for IC+ IP175C/IP178C switches"
+ 	select SWCONFIG
+ 
++config AR8216_PHY
++	tristate "Driver for Atheros AR8216 switches"
++	select SWCONFIG
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -17,6 +17,7 @@ obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
+ obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
+ obj-$(CONFIG_IP175C_PHY)	+= ip175c.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
++obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
diff --git a/target/linux/generic/patches-2.6.31/690-phy_rtl8306.patch b/target/linux/generic/patches-2.6.31/690-phy_rtl8306.patch
new file mode 100644
index 0000000000..bfebbcff51
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/690-phy_rtl8306.patch
@@ -0,0 +1,23 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -104,6 +104,10 @@ config AR8216_PHY
+ 	tristate "Driver for Atheros AR8216 switches"
+ 	select SWCONFIG
+ 
++config RTL8306_PHY
++	tristate "Driver for Realtek RTL8306S switches"
++	select SWCONFIG
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -18,6 +18,7 @@ obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
+ obj-$(CONFIG_IP175C_PHY)	+= ip175c.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
++obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
diff --git a/target/linux/generic/patches-2.6.31/691-phy_rtl8366.patch b/target/linux/generic/patches-2.6.31/691-phy_rtl8366.patch
new file mode 100644
index 0000000000..4ce0520b11
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/691-phy_rtl8366.patch
@@ -0,0 +1,44 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -135,4 +135,29 @@ config MDIO_GPIO
+ 	  To compile this driver as a module, choose M here: the module
+ 	  will be called mdio-gpio.
+ 
++config RTL8366_SMI
++	tristate "Driver for the RTL8366 SMI interface"
++	depends on GENERIC_GPIO
++	---help---
++	  This module implements the SMI interface protocol which is used
++	  by some RTL8366 ethernet switch devices via the generic GPIO API.
++
++if RTL8366_SMI
++
++config RTL8366S_PHY
++	tristate "Driver for the Realtek RTL8366S switch"
++	select SWCONFIG
++
++config RTL8366RB_PHY
++	tristate "Driver for the Realtek RTL8366RB switch"
++	select SWCONFIG
++
++config RTL8366S_PHY_DEBUG_FS
++	bool "RTL8366 switch driver DEBUG_FS support"
++	depends on RTL8366S_PHY || RTL8366RB_PHY
++	depends on DEBUG_FS
++	default n
++
++endif # RTL8366_SMI
++
+ endif # PHYLIB
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -19,6 +19,9 @@ obj-$(CONFIG_IP175C_PHY)	+= ip175c.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
+ obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
++obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o
++obj-$(CONFIG_RTL8366S_PHY)	+= rtl8366s.o
++obj-$(CONFIG_RTL8366RB_PHY)	+= rtl8366rb.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
diff --git a/target/linux/generic/patches-2.6.31/700-rtc7301.patch b/target/linux/generic/patches-2.6.31/700-rtc7301.patch
new file mode 100644
index 0000000000..6e66654400
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/700-rtc7301.patch
@@ -0,0 +1,250 @@
+--- a/drivers/rtc/Kconfig
++++ b/drivers/rtc/Kconfig
+@@ -535,6 +535,15 @@ config RTC_DRV_PCF50633
+ 	  If you say yes here you get support for the RTC subsystem of the
+ 	  NXP PCF50633 used in embedded systems.
+ 
++config RTC_DRV_RTC7301
++	tristate "Epson RTC-7301 SF/DG"
++	help
++	  If you say Y here you will get support for the
++	  Epson RTC-7301 SF/DG RTC chips.
++
++	  This driver can also be built as a module. If so, the module
++	  will be called rtc-7301.
++
+ comment "on-CPU RTC drivers"
+ 
+ config RTC_DRV_OMAP
+--- a/drivers/rtc/Makefile
++++ b/drivers/rtc/Makefile
+@@ -62,6 +62,7 @@ obj-$(CONFIG_RTC_DRV_R9701)	+= rtc-r9701
+ obj-$(CONFIG_RTC_DRV_RS5C313)	+= rtc-rs5c313.o
+ obj-$(CONFIG_RTC_DRV_RS5C348)	+= rtc-rs5c348.o
+ obj-$(CONFIG_RTC_DRV_RS5C372)	+= rtc-rs5c372.o
++obj-$(CONFIG_RTC_DRV_RTC7301)	+= rtc-rtc7301.o
+ obj-$(CONFIG_RTC_DRV_RX8025)	+= rtc-rx8025.o
+ obj-$(CONFIG_RTC_DRV_RX8581)	+= rtc-rx8581.o
+ obj-$(CONFIG_RTC_DRV_S35390A)	+= rtc-s35390a.o
+--- /dev/null
++++ b/drivers/rtc/rtc-rtc7301.c
+@@ -0,0 +1,219 @@
++/*
++ * Driver for Epson RTC-7301SF/DG
++ *
++ * Copyright (C) 2009 Jose Vasconcellos
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/rtc.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/delay.h>
++#include <linux/bcd.h>
++
++#define RTC_NAME "rtc7301"
++#define RTC_VERSION "0.1"
++
++/* Epson RTC-7301 register addresses */
++#define RTC7301_SEC		0x00
++#define RTC7301_SEC10		0x01
++#define RTC7301_MIN		0x02
++#define RTC7301_MIN10		0x03
++#define RTC7301_HOUR		0x04
++#define RTC7301_HOUR10		0x05
++#define RTC7301_WEEKDAY		0x06
++#define RTC7301_DAY		0x07
++#define RTC7301_DAY10		0x08
++#define RTC7301_MON		0x09
++#define RTC7301_MON10		0x0A
++#define RTC7301_YEAR		0x0B
++#define RTC7301_YEAR10		0x0C
++#define RTC7301_YEAR100		0x0D
++#define RTC7301_YEAR1000	0x0E
++#define RTC7301_CTRLREG		0x0F
++
++static uint8_t __iomem *rtc7301_base;
++
++#define read_reg(offset) (readb(rtc7301_base + offset) & 0xf)
++#define write_reg(offset, data) writeb(data, rtc7301_base + (offset))
++
++#define rtc7301_isbusy() (read_reg(RTC7301_CTRLREG) & 1)
++
++static void rtc7301_init_settings(void)
++{
++	int i;
++
++	write_reg(RTC7301_CTRLREG, 2);
++	write_reg(RTC7301_YEAR1000, 2);
++	udelay(122);
++
++	/* bank 1 */
++	write_reg(RTC7301_CTRLREG, 6);
++	for (i=0; i<15; i++)
++		write_reg(i, 0);
++
++	/* bank 2 */
++	write_reg(RTC7301_CTRLREG, 14);
++	for (i=0; i<15; i++)
++		write_reg(i, 0);
++	write_reg(RTC7301_CTRLREG, 0);
++}
++
++static int rtc7301_get_datetime(struct device *dev, struct rtc_time *dt)
++{
++	int cnt;
++	uint8_t buf[16];
++
++	cnt = 0;
++	while (rtc7301_isbusy()) {
++		udelay(244);
++		if (cnt++ > 100) {
++			dev_err(dev, "%s: timeout error %x\n", __func__, rtc7301_base[RTC7301_CTRLREG]);
++			return -EIO;
++		}
++	}
++
++	for (cnt=0; cnt<16; cnt++)
++		buf[cnt] = read_reg(cnt);
++
++	if (buf[RTC7301_SEC10] & 8) {
++		dev_err(dev, "%s: RTC not set\n", __func__);
++		return -EINVAL;
++	}
++
++	memset(dt, 0, sizeof(*dt));
++
++	dt->tm_sec =  buf[RTC7301_SEC] + buf[RTC7301_SEC10]*10;
++	dt->tm_min =  buf[RTC7301_MIN] + buf[RTC7301_MIN10]*10;
++	dt->tm_hour = buf[RTC7301_HOUR] + buf[RTC7301_HOUR10]*10;
++
++	dt->tm_mday = buf[RTC7301_DAY] + buf[RTC7301_DAY10]*10;
++	dt->tm_mon =  buf[RTC7301_MON] + buf[RTC7301_MON10]*10 - 1;
++	dt->tm_year = buf[RTC7301_YEAR] + buf[RTC7301_YEAR10]*10 +
++		      buf[RTC7301_YEAR100]*100 +
++		      ((buf[RTC7301_YEAR1000] & 3)*1000) - 1900;
++
++	/* the rtc device may contain illegal values on power up
++	 * according to the data sheet. make sure they are valid.
++	 */
++
++	return rtc_valid_tm(dt);
++}
++
++static int rtc7301_set_datetime(struct device *dev, struct rtc_time *dt)
++{
++	int data;
++
++	data = dt->tm_year + 1900;
++	if (data >= 2100 || data < 1900)
++		return -EINVAL;
++
++	write_reg(RTC7301_CTRLREG, 2);
++       	udelay(122);
++
++	data = bin2bcd(dt->tm_sec);
++	write_reg(RTC7301_SEC, data);
++	write_reg(RTC7301_SEC10, (data >> 4));
++
++	data = bin2bcd(dt->tm_min);
++	write_reg(RTC7301_MIN, data );
++	write_reg(RTC7301_MIN10, (data >> 4));
++
++	data = bin2bcd(dt->tm_hour);
++	write_reg(RTC7301_HOUR, data);
++	write_reg(RTC7301_HOUR10, (data >> 4));
++
++	data = bin2bcd(dt->tm_mday);
++	write_reg(RTC7301_DAY, data);
++	write_reg(RTC7301_DAY10, (data>> 4));
++
++	data = bin2bcd(dt->tm_mon + 1);
++	write_reg(RTC7301_MON, data);
++	write_reg(RTC7301_MON10, (data >> 4));
++
++	data = bin2bcd(dt->tm_year % 100);
++	write_reg(RTC7301_YEAR, data);
++	write_reg(RTC7301_YEAR10, (data >> 4));
++	data = bin2bcd((1900 + dt->tm_year) / 100);
++	write_reg(RTC7301_YEAR100, data);
++
++	data = bin2bcd(dt->tm_wday);
++	write_reg(RTC7301_WEEKDAY, data);
++
++	write_reg(RTC7301_CTRLREG, 0);
++
++	return 0;
++}
++
++static const struct rtc_class_ops rtc7301_rtc_ops = {
++	.read_time	= rtc7301_get_datetime,
++	.set_time	= rtc7301_set_datetime,
++};
++
++static int __devinit rtc7301_probe(struct platform_device *pdev)
++{
++	struct rtc_device *rtc;
++	struct resource *res;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res)
++		return -ENOENT;
++
++	rtc7301_base = ioremap_nocache(res->start, 0x1000 /*res->end - res->start + 1*/);
++	if (!rtc7301_base)
++		return -EINVAL;
++
++	rtc = rtc_device_register(RTC_NAME, &pdev->dev,
++				&rtc7301_rtc_ops, THIS_MODULE);
++	if (IS_ERR(rtc)) {
++		iounmap(rtc7301_base);
++		return PTR_ERR(rtc);
++	}
++
++	platform_set_drvdata(pdev, rtc);
++
++	rtc7301_init_settings();
++	return 0;
++}
++
++static int __devexit rtc7301_remove(struct platform_device *pdev)
++{
++	struct rtc_device *rtc = platform_get_drvdata(pdev);
++
++	if (rtc)
++		rtc_device_unregister(rtc);
++	if (rtc7301_base)
++		iounmap(rtc7301_base);
++	return 0;
++}
++
++static struct platform_driver rtc7301_driver = {
++	.driver = {
++		.name	= RTC_NAME,
++		.owner	= THIS_MODULE,
++	},
++	.probe	= rtc7301_probe,
++	.remove = __devexit_p(rtc7301_remove),
++};
++
++static __init int rtc7301_init(void)
++{
++	return platform_driver_register(&rtc7301_driver);
++}
++module_init(rtc7301_init);
++
++static __exit void rtc7301_exit(void)
++{
++	platform_driver_unregister(&rtc7301_driver);
++}
++module_exit(rtc7301_exit);
++
++MODULE_DESCRIPTION("Epson 7301 RTC driver");
++MODULE_AUTHOR("Jose Vasconcellos <jvasco@verizon.net>");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:" RTC_NAME);
++MODULE_VERSION(RTC_VERSION);
diff --git a/target/linux/generic/patches-2.6.31/750-glamo-headers.patch b/target/linux/generic/patches-2.6.31/750-glamo-headers.patch
new file mode 100644
index 0000000000..419d98a424
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/750-glamo-headers.patch
@@ -0,0 +1,21 @@
+--- a/include/linux/fb.h
++++ b/include/linux/fb.h
+@@ -124,6 +124,7 @@ struct dentry;
+ #define FB_ACCEL_TRIDENT_BLADE3D 52	/* Trident Blade3D		*/
+ #define FB_ACCEL_TRIDENT_BLADEXP 53	/* Trident BladeXP		*/
+ #define FB_ACCEL_CIRRUS_ALPINE   53	/* Cirrus Logic 543x/544x/5480	*/
++#define FB_ACCEL_GLAMO		50	/* SMedia Glamo                 */
+ #define FB_ACCEL_NEOMAGIC_NM2070 90	/* NeoMagic NM2070              */
+ #define FB_ACCEL_NEOMAGIC_NM2090 91	/* NeoMagic NM2090              */
+ #define FB_ACCEL_NEOMAGIC_NM2093 92	/* NeoMagic NM2093              */
+--- a/include/linux/Kbuild
++++ b/include/linux/Kbuild
+@@ -76,6 +76,8 @@ header-y += genetlink.h
+ header-y += gen_stats.h
+ header-y += gfs2_ondisk.h
+ header-y += gigaset_dev.h
++header-y += glamofb.h
++header-y += glamo-engine.h
+ header-y += hysdn_if.h
+ header-y += i2o-dev.h
+ header-y += i8k.h
diff --git a/target/linux/generic/patches-2.6.31/780-fix-race-in-snd_soc_jack_add_gpios.patch b/target/linux/generic/patches-2.6.31/780-fix-race-in-snd_soc_jack_add_gpios.patch
new file mode 100644
index 0000000000..b7214b9d6d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/780-fix-race-in-snd_soc_jack_add_gpios.patch
@@ -0,0 +1,33 @@
+commit 5ced436d549d911ce610ea47d85f71fae5bbfce4
+Author: Lars-Peter Clausen <lars@metafoo.de>
+Date:   Fri Jul 31 18:26:48 2009 +0200
+
+    ASoC: jack: Fix race in snd_soc_jack_add_gpios
+    
+    The irq can fire as soon as it has been requested, thus all fields accessed
+    from within the irq handler must be initialized prior to requesting the irq.
+    
+    Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
+
+--- a/sound/soc/soc-jack.c
++++ b/sound/soc/soc-jack.c
+@@ -220,6 +220,9 @@ int snd_soc_jack_add_gpios(struct snd_so
+ 		if (ret)
+ 			goto err;
+ 
++		INIT_WORK(&gpios[i].work, gpio_work);
++		gpios[i].jack = jack;
++
+ 		ret = request_irq(gpio_to_irq(gpios[i].gpio),
+ 				gpio_handler,
+ 				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+@@ -227,9 +230,6 @@ int snd_soc_jack_add_gpios(struct snd_so
+ 				&gpios[i]);
+ 		if (ret)
+ 			goto err;
+-
+-		INIT_WORK(&gpios[i].work, gpio_work);
+-		gpios[i].jack = jack;
+ 	}
+ 
+ 	return 0;
diff --git a/target/linux/generic/patches-2.6.31/801-usb_serial_endpoint_size.patch b/target/linux/generic/patches-2.6.31/801-usb_serial_endpoint_size.patch
new file mode 100644
index 0000000000..41b3848f4d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/801-usb_serial_endpoint_size.patch
@@ -0,0 +1,25 @@
+--- a/drivers/usb/serial/usb-serial.c
++++ b/drivers/usb/serial/usb-serial.c
+@@ -60,6 +60,7 @@ static struct usb_driver usb_serial_driv
+    drivers depend on it.
+ */
+ 
++static ushort maxSize = 0;
+ static int debug;
+ /* initially all NULL */
+ static struct usb_serial *serial_table[SERIAL_TTY_MINORS];
+@@ -947,7 +948,7 @@ int usb_serial_probe(struct usb_interfac
+ 			dev_err(&interface->dev, "No free urbs available\n");
+ 			goto probe_error;
+ 		}
+-		buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
++		buffer_size = (endpoint->wMaxPacketSize > maxSize) ? endpoint->wMaxPacketSize : maxSize;
+ 		port->bulk_in_size = buffer_size;
+ 		port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
+ 		port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
+@@ -1381,3 +1382,5 @@ MODULE_LICENSE("GPL");
+ 
+ module_param(debug, bool, S_IRUGO | S_IWUSR);
+ MODULE_PARM_DESC(debug, "Debug enabled or not");
++module_param(maxSize, ushort,0);
++MODULE_PARM_DESC(maxSize,"User specified USB endpoint size");
diff --git a/target/linux/generic/patches-2.6.31/840-unable_to_open_console.patch b/target/linux/generic/patches-2.6.31/840-unable_to_open_console.patch
new file mode 100644
index 0000000000..b90a247a8e
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/840-unable_to_open_console.patch
@@ -0,0 +1,11 @@
+--- a/init/main.c
++++ b/init/main.c
+@@ -839,7 +839,7 @@ static noinline int init_post(void)
+ 	numa_default_policy();
+ 
+ 	if (sys_open((const char __user *) "/dev/console", O_RDWR, 0) < 0)
+-		printk(KERN_WARNING "Warning: unable to open an initial console.\n");
++		printk(KERN_WARNING "Please be patient, while OpenWrt loads ...\n");
+ 
+ 	(void) sys_dup(0);
+ 	(void) sys_dup(0);
diff --git a/target/linux/generic/patches-2.6.31/902-darwin_scripts_include.patch b/target/linux/generic/patches-2.6.31/902-darwin_scripts_include.patch
new file mode 100644
index 0000000000..fc64c17d52
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/902-darwin_scripts_include.patch
@@ -0,0 +1,102 @@
+--- a/scripts/genksyms/parse.c_shipped
++++ b/scripts/genksyms/parse.c_shipped
+@@ -160,7 +160,9 @@
+ 
+ 
+ #include <assert.h>
++#ifndef __APPLE__
+ #include <malloc.h>
++#endif
+ #include "genksyms.h"
+ 
+ static int is_typedef;
+--- a/scripts/genksyms/parse.y
++++ b/scripts/genksyms/parse.y
+@@ -24,7 +24,9 @@
+ %{
+ 
+ #include <assert.h>
++#ifndef __APPLE__
+ #include <malloc.h>
++#endif
+ #include "genksyms.h"
+ 
+ static int is_typedef;
+--- a/scripts/kallsyms.c
++++ b/scripts/kallsyms.c
+@@ -22,6 +22,35 @@
+ #include <stdlib.h>
+ #include <string.h>
+ #include <ctype.h>
++#ifdef __APPLE__
++/* Darwin has no memmem implementation, this one is ripped of the uClibc-0.9.28 source */
++void *memmem (const void *haystack, size_t haystack_len,
++                          const void *needle,  size_t needle_len)
++{
++  const char *begin;
++  const char *const last_possible
++    = (const char *) haystack + haystack_len - needle_len;
++
++  if (needle_len == 0)
++    /* The first occurrence of the empty string is deemed to occur at
++       the beginning of the string.  */
++    return (void *) haystack;
++
++  /* Sanity check, otherwise the loop might search through the whole
++     memory.  */
++  if (__builtin_expect (haystack_len < needle_len, 0))
++    return NULL;
++
++  for (begin = (const char *) haystack; begin <= last_possible; ++begin)
++    if (begin[0] == ((const char *) needle)[0] &&
++        !memcmp ((const void *) &begin[1],
++                 (const void *) ((const char *) needle + 1),
++                 needle_len - 1))
++      return (void *) begin;
++
++  return NULL;
++}
++#endif
+ 
+ #ifndef ARRAY_SIZE
+ #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof(arr[0]))
+--- a/scripts/kconfig/Makefile
++++ b/scripts/kconfig/Makefile
+@@ -97,6 +97,9 @@ check-lxdialog  := $(srctree)/$(src)/lxd
+ # we really need to do so. (Do not call gcc as part of make mrproper)
+ HOST_EXTRACFLAGS = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags)
+ HOST_LOADLIBES   = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
++ifeq ($(shell uname -s),Darwin)
++HOST_LOADLIBES  += -lncurses
++endif
+ 
+ HOST_EXTRACFLAGS += -DLOCALE
+ 
+--- a/scripts/mod/mk_elfconfig.c
++++ b/scripts/mod/mk_elfconfig.c
+@@ -1,7 +1,11 @@
+ #include <stdio.h>
+ #include <stdlib.h>
+ #include <string.h>
++#ifndef __APPLE__
+ #include <elf.h>
++#else
++#include "../../../../../tools/sstrip/include/elf.h"
++#endif
+ 
+ int
+ main(int argc, char **argv)
+--- a/scripts/mod/modpost.h
++++ b/scripts/mod/modpost.h
+@@ -7,7 +7,11 @@
+ #include <sys/mman.h>
+ #include <fcntl.h>
+ #include <unistd.h>
++#if !(defined(__APPLE__) || defined(__CYGWIN__))
+ #include <elf.h>
++#else
++#include "../../../../../tools/sstrip/include/elf.h"
++#endif
+ 
+ #include "elfconfig.h"
+ 
diff --git a/target/linux/generic/patches-2.6.31/903-hostap_txpower.patch b/target/linux/generic/patches-2.6.31/903-hostap_txpower.patch
new file mode 100644
index 0000000000..e220b0b36e
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/903-hostap_txpower.patch
@@ -0,0 +1,154 @@
+--- a/drivers/net/wireless/hostap/hostap_ap.c
++++ b/drivers/net/wireless/hostap/hostap_ap.c
+@@ -2335,13 +2335,13 @@ int prism2_ap_get_sta_qual(local_info_t
+ 		addr[count].sa_family = ARPHRD_ETHER;
+ 		memcpy(addr[count].sa_data, sta->addr, ETH_ALEN);
+ 		if (sta->last_rx_silence == 0)
+-			qual[count].qual = sta->last_rx_signal < 27 ?
+-				0 : (sta->last_rx_signal - 27) * 92 / 127;
++                        qual[count].qual = (sta->last_rx_signal - 156) == 0 ?
++                                0 : (sta->last_rx_signal - 156) * 92 / 64;
+ 		else
+-			qual[count].qual = sta->last_rx_signal -
+-				sta->last_rx_silence - 35;
+-		qual[count].level = HFA384X_LEVEL_TO_dBm(sta->last_rx_signal);
+-		qual[count].noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence);
++                        qual[count].qual = (sta->last_rx_signal -
++                                sta->last_rx_silence) * 92 / 64;
++                qual[count].level = sta->last_rx_signal;
++                qual[count].noise = sta->last_rx_silence;
+ 		qual[count].updated = sta->last_rx_updated;
+ 
+ 		sta->last_rx_updated = IW_QUAL_DBM;
+@@ -2407,13 +2407,13 @@ int prism2_ap_translate_scan(struct net_
+ 		memset(&iwe, 0, sizeof(iwe));
+ 		iwe.cmd = IWEVQUAL;
+ 		if (sta->last_rx_silence == 0)
+-			iwe.u.qual.qual = sta->last_rx_signal < 27 ?
+-				0 : (sta->last_rx_signal - 27) * 92 / 127;
++	                iwe.u.qual.qual = (sta->last_rx_signal -156) == 0 ?
++	                        0 : (sta->last_rx_signal - 156) * 92 / 64;
+ 		else
+-			iwe.u.qual.qual = sta->last_rx_signal -
+-				sta->last_rx_silence - 35;
+-		iwe.u.qual.level = HFA384X_LEVEL_TO_dBm(sta->last_rx_signal);
+-		iwe.u.qual.noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence);
++                        iwe.u.qual.qual = (sta->last_rx_signal -
++                                sta->last_rx_silence) * 92 / 64;
++                iwe.u.qual.level = sta->last_rx_signal;
++                iwe.u.qual.noise = sta->last_rx_silence;
+ 		iwe.u.qual.updated = sta->last_rx_updated;
+ 		iwe.len = IW_EV_QUAL_LEN;
+ 		current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+--- a/drivers/net/wireless/hostap/hostap_config.h
++++ b/drivers/net/wireless/hostap/hostap_config.h
+@@ -45,4 +45,9 @@
+  */
+ /* #define PRISM2_NO_STATION_MODES */
+ 
++/* Enable TX power Setting functions
++ * (min att = -128 , max att =  127)
++ */
++#define RAW_TXPOWER_SETTING
++
+ #endif /* HOSTAP_CONFIG_H */
+--- a/drivers/net/wireless/hostap/hostap.h
++++ b/drivers/net/wireless/hostap/hostap.h
+@@ -90,6 +90,7 @@ extern const struct iw_handler_def hosta
+ extern const struct ethtool_ops prism2_ethtool_ops;
+ 
+ int hostap_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
++int hostap_restore_power(struct net_device *dev);
+ 
+ 
+ #endif /* HOSTAP_H */
+--- a/drivers/net/wireless/hostap/hostap_hw.c
++++ b/drivers/net/wireless/hostap/hostap_hw.c
+@@ -932,6 +932,7 @@ static int hfa384x_set_rid(struct net_de
+ 			prism2_hw_reset(dev);
+ 	}
+ 
++	hostap_restore_power(dev);
+ 	return res;
+ }
+ 
+--- a/drivers/net/wireless/hostap/hostap_info.c
++++ b/drivers/net/wireless/hostap/hostap_info.c
+@@ -431,6 +431,11 @@ static void handle_info_queue_linkstatus
+ 	}
+ 
+ 	/* Get BSSID if we have a valid AP address */
++
++	if ( val == HFA384X_LINKSTATUS_CONNECTED ||
++	     val == HFA384X_LINKSTATUS_DISCONNECTED )
++			hostap_restore_power(local->dev);
++
+ 	if (connected) {
+ 		netif_carrier_on(local->dev);
+ 		netif_carrier_on(local->ddev);
+--- a/drivers/net/wireless/hostap/hostap_ioctl.c
++++ b/drivers/net/wireless/hostap/hostap_ioctl.c
+@@ -1475,23 +1475,20 @@ static int prism2_txpower_hfa386x_to_dBm
+ 		val = 255;
+ 
+ 	tmp = val;
+-	tmp >>= 2;
+ 
+-	return -12 - tmp;
++	return tmp;
+ }
+ 
+ static u16 prism2_txpower_dBm_to_hfa386x(int val)
+ {
+ 	signed char tmp;
+ 
+-	if (val > 20)
+-		return 128;
+-	else if (val < -43)
++	if (val > 127)
+ 		return 127;
++	else if (val < -128)
++		return 128;
+ 
+ 	tmp = val;
+-	tmp = -12 - tmp;
+-	tmp <<= 2;
+ 
+ 	return (unsigned char) tmp;
+ }
+@@ -4055,3 +4052,35 @@ int hostap_ioctl(struct net_device *dev,
+ 
+ 	return ret;
+ }
++
++/* BUG FIX: Restore power setting value when lost due to F/W bug */
++
++int hostap_restore_power(struct net_device *dev)
++{
++        struct hostap_interface *iface = netdev_priv(dev);
++       local_info_t *local = iface->local;
++
++       u16 val;
++       int ret = 0;
++
++       if (local->txpower_type == PRISM2_TXPOWER_OFF) {
++                       val = 0xff; /* use all standby and sleep modes */
++                       ret = local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF,
++                                              HFA386X_CR_A_D_TEST_MODES2,
++                                              &val, NULL);
++       }
++
++#ifdef RAW_TXPOWER_SETTING
++       if (local->txpower_type == PRISM2_TXPOWER_FIXED) {
++               val = HFA384X_TEST_CFG_BIT_ALC;
++               local->func->cmd(dev, HFA384X_CMDCODE_TEST |
++                                (HFA384X_TEST_CFG_BITS << 8), 0, &val, NULL);
++               val = prism2_txpower_dBm_to_hfa386x(local->txpower);
++               ret = (local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF,
++                            HFA386X_CR_MANUAL_TX_POWER, &val, NULL));
++       }
++#endif /* RAW_TXPOWER_SETTING */
++       return (ret ? -EOPNOTSUPP : 0);
++}
++
++EXPORT_SYMBOL(hostap_restore_power);
diff --git a/target/linux/generic/patches-2.6.31/903-stddef_include.patch b/target/linux/generic/patches-2.6.31/903-stddef_include.patch
new file mode 100644
index 0000000000..7fe248d8d3
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/903-stddef_include.patch
@@ -0,0 +1,17 @@
+--- a/include/linux/stddef.h
++++ b/include/linux/stddef.h
+@@ -16,6 +16,7 @@ enum {
+ 	false	= 0,
+ 	true	= 1
+ };
++#endif /* __KERNEL__ */
+ 
+ #undef offsetof
+ #ifdef __compiler_offsetof
+@@ -23,6 +24,5 @@ enum {
+ #else
+ #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
+ #endif
+-#endif /* __KERNEL__ */
+ 
+ #endif
diff --git a/target/linux/generic/patches-2.6.31/905-i386_build.patch b/target/linux/generic/patches-2.6.31/905-i386_build.patch
new file mode 100644
index 0000000000..c701fdaa95
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/905-i386_build.patch
@@ -0,0 +1,10 @@
+--- a/arch/x86/boot/tools/build.c
++++ b/arch/x86/boot/tools/build.c
+@@ -29,7 +29,6 @@
+ #include <stdarg.h>
+ #include <sys/types.h>
+ #include <sys/stat.h>
+-#include <sys/sysmacros.h>
+ #include <unistd.h>
+ #include <fcntl.h>
+ #include <sys/mman.h>
diff --git a/target/linux/generic/patches-2.6.31/920-01-hotpluggable-spi-gpio.patch b/target/linux/generic/patches-2.6.31/920-01-hotpluggable-spi-gpio.patch
new file mode 100644
index 0000000000..b10bc9a65e
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/920-01-hotpluggable-spi-gpio.patch
@@ -0,0 +1,60 @@
+Fix spi-gpio for hotplug.
+
+--mb
+
+
+
+--- a/drivers/spi/spi_gpio.c
++++ b/drivers/spi/spi_gpio.c
+@@ -218,7 +218,7 @@ static void spi_gpio_cleanup(struct spi_
+ 	spi_bitbang_cleanup(spi);
+ }
+ 
+-static int __init spi_gpio_alloc(unsigned pin, const char *label, bool is_in)
++static int __devinit spi_gpio_alloc(unsigned pin, const char *label, bool is_in)
+ {
+ 	int value;
+ 
+@@ -232,7 +232,7 @@ static int __init spi_gpio_alloc(unsigne
+ 	return value;
+ }
+ 
+-static int __init
++static int __devinit
+ spi_gpio_request(struct spi_gpio_platform_data *pdata, const char *label)
+ {
+ 	int value;
+@@ -261,7 +261,7 @@ done:
+ 	return value;
+ }
+ 
+-static int __init spi_gpio_probe(struct platform_device *pdev)
++static int __devinit spi_gpio_probe(struct platform_device *pdev)
+ {
+ 	int				status;
+ 	struct spi_master		*master;
+@@ -317,7 +317,7 @@ gpio_free:
+ 	return status;
+ }
+ 
+-static int __exit spi_gpio_remove(struct platform_device *pdev)
++static int __devexit spi_gpio_remove(struct platform_device *pdev)
+ {
+ 	struct spi_gpio			*spi_gpio;
+ 	struct spi_gpio_platform_data	*pdata;
+@@ -344,12 +344,13 @@ MODULE_ALIAS("platform:" DRIVER_NAME);
+ static struct platform_driver spi_gpio_driver = {
+ 	.driver.name	= DRIVER_NAME,
+ 	.driver.owner	= THIS_MODULE,
+-	.remove		= __exit_p(spi_gpio_remove),
++	.probe		= spi_gpio_probe,
++	.remove		= __devexit_p(spi_gpio_remove),
+ };
+ 
+ static int __init spi_gpio_init(void)
+ {
+-	return platform_driver_probe(&spi_gpio_driver, spi_gpio_probe);
++	return platform_driver_register(&spi_gpio_driver);
+ }
+ module_init(spi_gpio_init);
+ 
diff --git a/target/linux/generic/patches-2.6.31/920-04-spi-gpio-implement-spi-delay.patch b/target/linux/generic/patches-2.6.31/920-04-spi-gpio-implement-spi-delay.patch
new file mode 100644
index 0000000000..19032881b8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/920-04-spi-gpio-implement-spi-delay.patch
@@ -0,0 +1,58 @@
+Implement the SPI-GPIO delay function for busses that need speed limitation.
+
+--mb
+
+
+
+--- a/drivers/spi/spi_gpio.c
++++ b/drivers/spi/spi_gpio.c
+@@ -21,6 +21,7 @@
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
+ #include <linux/gpio.h>
++#include <linux/delay.h>
+ 
+ #include <linux/spi/spi.h>
+ #include <linux/spi/spi_bitbang.h>
+@@ -69,6 +70,7 @@ struct spi_gpio {
+  *		#define	SPI_MOSI_GPIO	120
+  *		#define	SPI_SCK_GPIO	121
+  *		#define	SPI_N_CHIPSEL	4
++ *		#undef NEED_SPIDELAY
+  *		#include "spi_gpio.c"
+  */
+ 
+@@ -76,6 +78,7 @@ struct spi_gpio {
+ #define DRIVER_NAME	"spi_gpio"
+ 
+ #define GENERIC_BITBANG	/* vs tight inlines */
++#define NEED_SPIDELAY	1
+ 
+ /* all functions referencing these symbols must define pdata */
+ #define SPI_MISO_GPIO	((pdata)->miso)
+@@ -120,12 +123,20 @@ static inline int getmiso(const struct s
+ #undef pdata
+ 
+ /*
+- * NOTE:  this clocks "as fast as we can".  It "should" be a function of the
+- * requested device clock.  Software overhead means we usually have trouble
+- * reaching even one Mbit/sec (except when we can inline bitops), so for now
+- * we'll just assume we never need additional per-bit slowdowns.
++ * NOTE:  to clock "as fast as we can", set spi_device.max_speed_hz
++ * and spi_transfer.speed_hz to 0.
++ * Otherwise this is a function of the requested device clock.
++ * Software overhead means we usually have trouble
++ * reaching even one Mbit/sec (except when we can inline bitops). So on small
++ * embedded devices with fast SPI slaves you usually don't need a delay.
+  */
+-#define spidelay(nsecs)	do {} while (0)
++static inline void spidelay(unsigned nsecs)
++{
++#ifdef NEED_SPIDELAY
++	if (unlikely(nsecs))
++		ndelay(nsecs);
++#endif /* NEED_SPIDELAY */
++}
+ 
+ #define	EXPAND_BITBANG_TXRX
+ #include <linux/spi/spi_bitbang.h>
diff --git a/target/linux/generic/patches-2.6.31/921-gpio_spi_driver.patch b/target/linux/generic/patches-2.6.31/921-gpio_spi_driver.patch
new file mode 100644
index 0000000000..90e40e7054
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/921-gpio_spi_driver.patch
@@ -0,0 +1,366 @@
+THIS CODE IS DEPRECATED.
+
+Please use the new mainline SPI-GPIO driver, as of 2.6.29.
+
+--mb
+
+
+
+--- /dev/null
++++ b/include/linux/spi/spi_gpio_old.h
+@@ -0,0 +1,73 @@
++/*
++ * spi_gpio interface to platform code
++ *
++ * Copyright (c) 2008 Piotr Skamruk
++ * Copyright (c) 2008 Michael Buesch
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef _LINUX_SPI_SPI_GPIO
++#define _LINUX_SPI_SPI_GPIO
++
++#include <linux/types.h>
++#include <linux/spi/spi.h>
++
++
++/**
++ * struct spi_gpio_platform_data - Data definitions for a SPI-GPIO device.
++ *
++ * This structure holds information about a GPIO-based SPI device.
++ *
++ * @pin_clk: The GPIO pin number of the CLOCK pin.
++ *
++ * @pin_miso: The GPIO pin number of the MISO pin.
++ *
++ * @pin_mosi: The GPIO pin number of the MOSI pin.
++ *
++ * @pin_cs: The GPIO pin number of the CHIPSELECT pin.
++ *
++ * @cs_activelow: If true, the chip is selected when the CS line is low.
++ *
++ * @no_spi_delay: If true, no delay is done in the lowlevel bitbanging.
++ *                Note that doing no delay is not standards compliant,
++ *                but it might be needed to speed up transfers on some
++ *                slow embedded machines.
++ *
++ * @boardinfo_setup: This callback is called after the
++ *                   SPI master device was registered, but before the
++ *                   device is registered.
++ * @boardinfo_setup_data: Data argument passed to boardinfo_setup().
++ */
++struct spi_gpio_platform_data {
++	unsigned int pin_clk;
++	unsigned int pin_miso;
++	unsigned int pin_mosi;
++	unsigned int pin_cs;
++	bool cs_activelow;
++	bool no_spi_delay;
++	int (*boardinfo_setup)(struct spi_board_info *bi,
++			       struct spi_master *master,
++			       void *data);
++	void *boardinfo_setup_data;
++};
++
++/**
++ * SPI_GPIO_PLATDEV_NAME - The platform device name string.
++ *
++ * The name string that has to be used for platform_device_alloc
++ * when allocating a spi-gpio device.
++ */
++#define SPI_GPIO_PLATDEV_NAME	"spi-gpio"
++
++/**
++ * spi_gpio_next_id - Get another platform device ID number.
++ *
++ * This returns the next platform device ID number that has to be used
++ * for platform_device_alloc. The ID is opaque and should not be used for
++ * anything else.
++ */
++int spi_gpio_next_id(void);
++
++#endif /* _LINUX_SPI_SPI_GPIO */
+--- /dev/null
++++ b/drivers/spi/spi_gpio_old.c
+@@ -0,0 +1,251 @@
++/*
++ * Bitbanging SPI bus driver using GPIO API
++ *
++ * Copyright (c) 2008 Piotr Skamruk
++ * Copyright (c) 2008 Michael Buesch
++ *
++ * based on spi_s3c2410_gpio.c
++ *   Copyright (c) 2006 Ben Dooks
++ *   Copyright (c) 2006 Simtec Electronics
++ * and on i2c-gpio.c
++ *   Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/spinlock.h>
++#include <linux/workqueue.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_bitbang.h>
++#include <linux/spi/spi_gpio_old.h>
++#include <linux/gpio.h>
++#include <asm/atomic.h>
++
++
++struct spi_gpio {
++	struct spi_bitbang bitbang;
++	struct spi_gpio_platform_data *info;
++	struct platform_device *pdev;
++	struct spi_board_info bi;
++};
++
++
++static inline struct spi_gpio *spidev_to_sg(struct spi_device *dev)
++{
++	return dev->controller_data;
++}
++
++static inline void setsck(struct spi_device *dev, int val)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++	gpio_set_value(sp->info->pin_clk, val ? 1 : 0);
++}
++
++static inline void setmosi(struct spi_device *dev, int val)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++	gpio_set_value(sp->info->pin_mosi, val ? 1 : 0);
++}
++
++static inline u32 getmiso(struct spi_device *dev)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++	return gpio_get_value(sp->info->pin_miso) ? 1 : 0;
++}
++
++static inline void do_spidelay(struct spi_device *dev, unsigned nsecs)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++
++	if (!sp->info->no_spi_delay)
++		ndelay(nsecs);
++}
++
++#define spidelay(nsecs) do {					\
++	/* Steal the spi_device pointer from our caller.	\
++	 * The bitbang-API should probably get fixed here... */	\
++	do_spidelay(spi, nsecs);				\
++  } while (0)
++
++#define EXPAND_BITBANG_TXRX
++#include <linux/spi/spi_bitbang.h>
++
++static u32 spi_gpio_txrx_mode0(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
++}
++
++static u32 spi_gpio_txrx_mode1(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
++}
++
++static u32 spi_gpio_txrx_mode2(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
++}
++
++static u32 spi_gpio_txrx_mode3(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
++}
++
++static void spi_gpio_chipselect(struct spi_device *dev, int on)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++
++	if (sp->info->cs_activelow)
++		on = !on;
++	gpio_set_value(sp->info->pin_cs, on ? 1 : 0);
++}
++
++static int spi_gpio_probe(struct platform_device *pdev)
++{
++	struct spi_master *master;
++	struct spi_gpio_platform_data *pdata;
++	struct spi_gpio *sp;
++	struct spi_device *spidev;
++	int err;
++
++	pdata = pdev->dev.platform_data;
++	if (!pdata)
++		return -ENXIO;
++
++	err = -ENOMEM;
++	master = spi_alloc_master(&pdev->dev, sizeof(struct spi_gpio));
++	if (!master)
++		goto err_alloc_master;
++
++	sp = spi_master_get_devdata(master);
++	platform_set_drvdata(pdev, sp);
++	sp->info = pdata;
++
++	err = gpio_request(pdata->pin_clk, "spi_clock");
++	if (err)
++		goto err_request_clk;
++	err = gpio_request(pdata->pin_mosi, "spi_mosi");
++	if (err)
++		goto err_request_mosi;
++	err = gpio_request(pdata->pin_miso, "spi_miso");
++	if (err)
++		goto err_request_miso;
++	err = gpio_request(pdata->pin_cs, "spi_cs");
++	if (err)
++		goto err_request_cs;
++
++	sp->bitbang.master = spi_master_get(master);
++	sp->bitbang.master->bus_num = -1;
++	sp->bitbang.master->num_chipselect = 1;
++	sp->bitbang.chipselect = spi_gpio_chipselect;
++	sp->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_mode0;
++	sp->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_mode1;
++	sp->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_mode2;
++	sp->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_mode3;
++
++	gpio_direction_output(pdata->pin_clk, 0);
++	gpio_direction_output(pdata->pin_mosi, 0);
++	gpio_direction_output(pdata->pin_cs,
++			      pdata->cs_activelow ? 1 : 0);
++	gpio_direction_input(pdata->pin_miso);
++
++	err = spi_bitbang_start(&sp->bitbang);
++	if (err)
++		goto err_no_bitbang;
++	err = pdata->boardinfo_setup(&sp->bi, master,
++				     pdata->boardinfo_setup_data);
++	if (err)
++		goto err_bi_setup;
++	sp->bi.controller_data = sp;
++	spidev = spi_new_device(master, &sp->bi);
++	if (!spidev)
++		goto err_new_dev;
++
++	return 0;
++
++err_new_dev:
++err_bi_setup:
++	spi_bitbang_stop(&sp->bitbang);
++err_no_bitbang:
++	spi_master_put(sp->bitbang.master);
++	gpio_free(pdata->pin_cs);
++err_request_cs:
++	gpio_free(pdata->pin_miso);
++err_request_miso:
++	gpio_free(pdata->pin_mosi);
++err_request_mosi:
++	gpio_free(pdata->pin_clk);
++err_request_clk:
++	kfree(master);
++
++err_alloc_master:
++	return err;
++}
++
++static int __devexit spi_gpio_remove(struct platform_device *pdev)
++{
++	struct spi_gpio *sp;
++	struct spi_gpio_platform_data *pdata;
++
++	pdata = pdev->dev.platform_data;
++	sp = platform_get_drvdata(pdev);
++
++	gpio_free(pdata->pin_clk);
++	gpio_free(pdata->pin_mosi);
++	gpio_free(pdata->pin_miso);
++	gpio_free(pdata->pin_cs);
++	spi_bitbang_stop(&sp->bitbang);
++	spi_master_put(sp->bitbang.master);
++
++	return 0;
++}
++
++static struct platform_driver spi_gpio_driver = {
++	.driver		= {
++		.name	= SPI_GPIO_PLATDEV_NAME,
++		.owner	= THIS_MODULE,
++	},
++	.probe		= spi_gpio_probe,
++	.remove		= __devexit_p(spi_gpio_remove),
++};
++
++int spi_gpio_next_id(void)
++{
++	static atomic_t counter = ATOMIC_INIT(-1);
++
++	return atomic_inc_return(&counter);
++}
++EXPORT_SYMBOL(spi_gpio_next_id);
++
++static int __init spi_gpio_init(void)
++{
++	int err;
++
++	err = platform_driver_register(&spi_gpio_driver);
++	if (err)
++		printk(KERN_ERR "spi-gpio: register failed: %d\n", err);
++
++	return err;
++}
++module_init(spi_gpio_init);
++
++static void __exit spi_gpio_exit(void)
++{
++	platform_driver_unregister(&spi_gpio_driver);
++}
++module_exit(spi_gpio_exit);
++
++MODULE_AUTHOR("Piot Skamruk <piotr.skamruk at gmail.com>");
++MODULE_AUTHOR("Michael Buesch");
++MODULE_DESCRIPTION("Platform independent GPIO bitbanging SPI driver");
++MODULE_LICENSE("GPL v2");
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -116,6 +116,15 @@ config SPI_GPIO
+ 	  GPIO operations, you should be able to leverage that for better
+ 	  speed with a custom version of this driver; see the source code.
+ 
++config SPI_GPIO_OLD
++	tristate "Old GPIO API based bitbanging SPI controller (DEPRECATED)"
++	depends on SPI_MASTER && GENERIC_GPIO
++	select SPI_BITBANG
++	help
++	  This code is deprecated. Please use the new mainline SPI-GPIO driver.
++
++	  If unsure, say N.
++
+ config SPI_IMX
+ 	tristate "Freescale iMX SPI controller"
+ 	depends on ARCH_MX1 && EXPERIMENTAL
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -17,6 +17,7 @@ obj-$(CONFIG_SPI_BITBANG)		+= spi_bitban
+ obj-$(CONFIG_SPI_AU1550)		+= au1550_spi.o
+ obj-$(CONFIG_SPI_BUTTERFLY)		+= spi_butterfly.o
+ obj-$(CONFIG_SPI_GPIO)			+= spi_gpio.o
++obj-$(CONFIG_SPI_GPIO_OLD)		+= spi_gpio_old.o
+ obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
+ obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
+ obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
diff --git a/target/linux/generic/patches-2.6.31/922-gpiommc.patch b/target/linux/generic/patches-2.6.31/922-gpiommc.patch
new file mode 100644
index 0000000000..10d09624d4
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/922-gpiommc.patch
@@ -0,0 +1,843 @@
+--- /dev/null
++++ b/drivers/mmc/host/gpiommc.c
+@@ -0,0 +1,608 @@
++/*
++ * Driver an MMC/SD card on a bitbanging GPIO SPI bus.
++ * This module hooks up the mmc_spi and spi_gpio modules and also
++ * provides a configfs interface.
++ *
++ * Copyright 2008 Michael Buesch <mb@bu3sch.de>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include <linux/mmc/gpiommc.h>
++#include <linux/platform_device.h>
++#include <linux/list.h>
++#include <linux/mutex.h>
++#include <linux/spi/spi_gpio_old.h>
++#include <linux/configfs.h>
++#include <linux/gpio.h>
++#include <asm/atomic.h>
++
++
++#define PFX				"gpio-mmc: "
++
++
++struct gpiommc_device {
++	struct platform_device *pdev;
++	struct platform_device *spi_pdev;
++	struct spi_board_info boardinfo;
++};
++
++
++MODULE_DESCRIPTION("GPIO based MMC driver");
++MODULE_AUTHOR("Michael Buesch");
++MODULE_LICENSE("GPL");
++
++
++static int gpiommc_boardinfo_setup(struct spi_board_info *bi,
++				   struct spi_master *master,
++				   void *data)
++{
++	struct gpiommc_device *d = data;
++	struct gpiommc_platform_data *pdata = d->pdev->dev.platform_data;
++
++	/* Bind the SPI master to the MMC-SPI host driver. */
++	strlcpy(bi->modalias, "mmc_spi", sizeof(bi->modalias));
++
++	bi->max_speed_hz = pdata->max_bus_speed;
++	bi->bus_num = master->bus_num;
++	bi->mode = pdata->mode;
++
++	return 0;
++}
++
++static int gpiommc_probe(struct platform_device *pdev)
++{
++	struct gpiommc_platform_data *mmc_pdata = pdev->dev.platform_data;
++	struct spi_gpio_platform_data spi_pdata;
++	struct gpiommc_device *d;
++	int err;
++
++	err = -ENXIO;
++	if (!mmc_pdata)
++		goto error;
++
++#ifdef CONFIG_MMC_SPI_MODULE
++	err = request_module("mmc_spi");
++	if (err) {
++		printk(KERN_WARNING PFX
++		       "Failed to request mmc_spi module.\n");
++	}
++#endif /* CONFIG_MMC_SPI_MODULE */
++
++	/* Allocate the GPIO-MMC device */
++	err = -ENOMEM;
++	d = kzalloc(sizeof(*d), GFP_KERNEL);
++	if (!d)
++		goto error;
++	d->pdev = pdev;
++
++	/* Create the SPI-GPIO device */
++	d->spi_pdev = platform_device_alloc(SPI_GPIO_PLATDEV_NAME,
++					    spi_gpio_next_id());
++	if (!d->spi_pdev)
++		goto err_free_d;
++
++	memset(&spi_pdata, 0, sizeof(spi_pdata));
++	spi_pdata.pin_clk = mmc_pdata->pins.gpio_clk;
++	spi_pdata.pin_miso = mmc_pdata->pins.gpio_do;
++	spi_pdata.pin_mosi = mmc_pdata->pins.gpio_di;
++	spi_pdata.pin_cs = mmc_pdata->pins.gpio_cs;
++	spi_pdata.cs_activelow = mmc_pdata->pins.cs_activelow;
++	spi_pdata.no_spi_delay = mmc_pdata->no_spi_delay;
++	spi_pdata.boardinfo_setup = gpiommc_boardinfo_setup;
++	spi_pdata.boardinfo_setup_data = d;
++
++	err = platform_device_add_data(d->spi_pdev, &spi_pdata,
++				       sizeof(spi_pdata));
++	if (err)
++		goto err_free_pdev;
++	err = platform_device_add(d->spi_pdev);
++	if (err)
++		goto err_free_pdata;
++	platform_set_drvdata(pdev, d);
++
++	printk(KERN_INFO PFX "MMC-Card \"%s\" "
++	       "attached to GPIO pins di=%u, do=%u, clk=%u, cs=%u\n",
++	       mmc_pdata->name, mmc_pdata->pins.gpio_di,
++	       mmc_pdata->pins.gpio_do,
++	       mmc_pdata->pins.gpio_clk,
++	       mmc_pdata->pins.gpio_cs);
++
++	return 0;
++
++err_free_pdata:
++	kfree(d->spi_pdev->dev.platform_data);
++	d->spi_pdev->dev.platform_data = NULL;
++err_free_pdev:
++	platform_device_put(d->spi_pdev);
++err_free_d:
++	kfree(d);
++error:
++	return err;
++}
++
++static int gpiommc_remove(struct platform_device *pdev)
++{
++	struct gpiommc_device *d = platform_get_drvdata(pdev);
++	struct gpiommc_platform_data *pdata = d->pdev->dev.platform_data;
++
++	platform_device_unregister(d->spi_pdev);
++	printk(KERN_INFO PFX "GPIO based MMC-Card \"%s\" removed\n",
++	       pdata->name);
++	platform_device_put(d->spi_pdev);
++
++	return 0;
++}
++
++#ifdef CONFIG_GPIOMMC_CONFIGFS
++
++/* A device that was created through configfs */
++struct gpiommc_configfs_device {
++	struct config_item item;
++	/* The platform device, after registration. */
++	struct platform_device *pdev;
++	/* The configuration */
++	struct gpiommc_platform_data pdata;
++};
++
++#define GPIO_INVALID	-1
++
++static inline bool gpiommc_is_registered(struct gpiommc_configfs_device *dev)
++{
++	return (dev->pdev != NULL);
++}
++
++static inline struct gpiommc_configfs_device *ci_to_gpiommc(struct config_item *item)
++{
++	return item ? container_of(item, struct gpiommc_configfs_device, item) : NULL;
++}
++
++static struct configfs_attribute gpiommc_attr_DI = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_data_in",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_DO = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_data_out",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_CLK = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_clock",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_CS = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_chipselect",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_CS_activelow = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_chipselect_activelow",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_spimode = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "spi_mode",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_spidelay = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "spi_delay",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_max_bus_speed = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "max_bus_speed",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_register = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "register",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute *gpiommc_config_attrs[] = {
++	&gpiommc_attr_DI,
++	&gpiommc_attr_DO,
++	&gpiommc_attr_CLK,
++	&gpiommc_attr_CS,
++	&gpiommc_attr_CS_activelow,
++	&gpiommc_attr_spimode,
++	&gpiommc_attr_spidelay,
++	&gpiommc_attr_max_bus_speed,
++	&gpiommc_attr_register,
++	NULL,
++};
++
++static ssize_t gpiommc_config_attr_show(struct config_item *item,
++					struct configfs_attribute *attr,
++					char *page)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++	ssize_t count = 0;
++	unsigned int gpio;
++	int err = 0;
++
++	if (attr == &gpiommc_attr_DI) {
++		gpio = dev->pdata.pins.gpio_di;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_DO) {
++		gpio = dev->pdata.pins.gpio_do;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CLK) {
++		gpio = dev->pdata.pins.gpio_clk;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS) {
++		gpio = dev->pdata.pins.gpio_cs;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS_activelow) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 dev->pdata.pins.cs_activelow);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spimode) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 dev->pdata.mode);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spidelay) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 !dev->pdata.no_spi_delay);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_max_bus_speed) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 dev->pdata.max_bus_speed);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_register) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 gpiommc_is_registered(dev));
++		goto out;
++	}
++	WARN_ON(1);
++	err = -ENOSYS;
++out:
++	return err ? err : count;
++}
++
++static int gpiommc_do_register(struct gpiommc_configfs_device *dev,
++			       const char *name)
++{
++	int err;
++
++	if (gpiommc_is_registered(dev))
++		return 0;
++
++	if (!gpio_is_valid(dev->pdata.pins.gpio_di) ||
++	    !gpio_is_valid(dev->pdata.pins.gpio_do) ||
++	    !gpio_is_valid(dev->pdata.pins.gpio_clk) ||
++	    !gpio_is_valid(dev->pdata.pins.gpio_cs)) {
++		printk(KERN_ERR PFX
++		       "configfs: Invalid GPIO pin number(s)\n");
++		return -EINVAL;
++	}
++
++	strlcpy(dev->pdata.name, name,
++		sizeof(dev->pdata.name));
++
++	dev->pdev = platform_device_alloc(GPIOMMC_PLATDEV_NAME,
++					  gpiommc_next_id());
++	if (!dev->pdev)
++		return -ENOMEM;
++	err = platform_device_add_data(dev->pdev, &dev->pdata,
++				       sizeof(dev->pdata));
++	if (err) {
++		platform_device_put(dev->pdev);
++		return err;
++	}
++	err = platform_device_add(dev->pdev);
++	if (err) {
++		platform_device_put(dev->pdev);
++		return err;
++	}
++
++	return 0;
++}
++
++static void gpiommc_do_unregister(struct gpiommc_configfs_device *dev)
++{
++	if (!gpiommc_is_registered(dev))
++		return;
++
++	platform_device_unregister(dev->pdev);
++	dev->pdev = NULL;
++}
++
++static ssize_t gpiommc_config_attr_store(struct config_item *item,
++					 struct configfs_attribute *attr,
++					 const char *page, size_t count)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++	int err = -EINVAL;
++	unsigned long data;
++
++	if (attr == &gpiommc_attr_register) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data == 1)
++			err = gpiommc_do_register(dev, item->ci_name);
++		if (data == 0) {
++			gpiommc_do_unregister(dev);
++			err = 0;
++		}
++		goto out;
++	}
++
++	if (gpiommc_is_registered(dev)) {
++		/* The rest of the config parameters can only be set
++		 * as long as the device is not registered, yet. */
++		err = -EBUSY;
++		goto out;
++	}
++
++	if (attr == &gpiommc_attr_DI) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_di = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_DO) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_do = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CLK) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_clk = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_cs = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS_activelow) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data != 0 && data != 1)
++			goto out;
++		dev->pdata.pins.cs_activelow = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spimode) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		switch (data) {
++		case 0:
++			dev->pdata.mode = SPI_MODE_0;
++			break;
++		case 1:
++			dev->pdata.mode = SPI_MODE_1;
++			break;
++		case 2:
++			dev->pdata.mode = SPI_MODE_2;
++			break;
++		case 3:
++			dev->pdata.mode = SPI_MODE_3;
++			break;
++		default:
++			goto out;
++		}
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spidelay) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data != 0 && data != 1)
++			goto out;
++		dev->pdata.no_spi_delay = !data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_max_bus_speed) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data > UINT_MAX)
++			goto out;
++		dev->pdata.max_bus_speed = data;
++		err = 0;
++		goto out;
++	}
++	WARN_ON(1);
++	err = -ENOSYS;
++out:
++	return err ? err : count;
++}
++
++static void gpiommc_config_item_release(struct config_item *item)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++
++	kfree(dev);
++}
++
++static struct configfs_item_operations gpiommc_config_item_ops = {
++	.release		= gpiommc_config_item_release,
++	.show_attribute		= gpiommc_config_attr_show,
++	.store_attribute	= gpiommc_config_attr_store,
++};
++
++static struct config_item_type gpiommc_dev_ci_type = {
++	.ct_item_ops	= &gpiommc_config_item_ops,
++	.ct_attrs	= gpiommc_config_attrs,
++	.ct_owner	= THIS_MODULE,
++};
++
++static struct config_item *gpiommc_make_item(struct config_group *group,
++					     const char *name)
++{
++	struct gpiommc_configfs_device *dev;
++
++	if (strlen(name) > GPIOMMC_MAX_NAMELEN) {
++		printk(KERN_ERR PFX "configfs: device name too long\n");
++		return NULL;
++	}
++
++	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
++	if (!dev)
++		return NULL;
++
++	config_item_init_type_name(&dev->item, name,
++				   &gpiommc_dev_ci_type);
++
++	/* Assign default configuration */
++	dev->pdata.pins.gpio_di = GPIO_INVALID;
++	dev->pdata.pins.gpio_do = GPIO_INVALID;
++	dev->pdata.pins.gpio_clk = GPIO_INVALID;
++	dev->pdata.pins.gpio_cs = GPIO_INVALID;
++	dev->pdata.pins.cs_activelow = 1;
++	dev->pdata.mode = SPI_MODE_0;
++	dev->pdata.no_spi_delay = 0;
++	dev->pdata.max_bus_speed = 5000000; /* 5 MHz */
++
++	return &(dev->item);
++}
++
++static void gpiommc_drop_item(struct config_group *group,
++			      struct config_item *item)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++
++	gpiommc_do_unregister(dev);
++	kfree(dev);
++}
++
++static struct configfs_group_operations gpiommc_ct_group_ops = {
++	.make_item	= gpiommc_make_item,
++	.drop_item	= gpiommc_drop_item,
++};
++
++static struct config_item_type gpiommc_ci_type = {
++	.ct_group_ops	= &gpiommc_ct_group_ops,
++	.ct_owner	= THIS_MODULE,
++};
++
++static struct configfs_subsystem gpiommc_subsys = {
++	.su_group = {
++		.cg_item = {
++			.ci_namebuf = GPIOMMC_PLATDEV_NAME,
++			.ci_type = &gpiommc_ci_type,
++		},
++	},
++	.su_mutex = __MUTEX_INITIALIZER(gpiommc_subsys.su_mutex),
++};
++
++#endif /* CONFIG_GPIOMMC_CONFIGFS */
++
++static struct platform_driver gpiommc_plat_driver = {
++	.probe	= gpiommc_probe,
++	.remove	= gpiommc_remove,
++	.driver	= {
++		.name	= GPIOMMC_PLATDEV_NAME,
++		.owner	= THIS_MODULE,
++	},
++};
++
++int gpiommc_next_id(void)
++{
++	static atomic_t counter = ATOMIC_INIT(-1);
++
++	return atomic_inc_return(&counter);
++}
++EXPORT_SYMBOL(gpiommc_next_id);
++
++static int __init gpiommc_modinit(void)
++{
++	int err;
++
++	err = platform_driver_register(&gpiommc_plat_driver);
++	if (err)
++		return err;
++
++#ifdef CONFIG_GPIOMMC_CONFIGFS
++	config_group_init(&gpiommc_subsys.su_group);
++	err = configfs_register_subsystem(&gpiommc_subsys);
++	if (err) {
++		platform_driver_unregister(&gpiommc_plat_driver);
++		return err;
++	}
++#endif /* CONFIG_GPIOMMC_CONFIGFS */
++
++	return 0;
++}
++module_init(gpiommc_modinit);
++
++static void __exit gpiommc_modexit(void)
++{
++#ifdef CONFIG_GPIOMMC_CONFIGFS
++	configfs_unregister_subsystem(&gpiommc_subsys);
++#endif
++	platform_driver_unregister(&gpiommc_plat_driver);
++}
++module_exit(gpiommc_modexit);
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -278,6 +278,31 @@ config MMC_TMIO
+ 	  This provides support for the SD/MMC cell found in TC6393XB,
+ 	  T7L66XB and also HTC ASIC3
+ 
++config GPIOMMC
++	tristate "MMC/SD over GPIO-based SPI"
++	depends on MMC && MMC_SPI && SPI_GPIO_OLD
++	help
++	  This driver hooks up the mmc_spi and spi_gpio modules so that
++	  MMC/SD cards can be used on a GPIO based bus by bitbanging
++	  the SPI protocol in software.
++
++	  This driver provides a configfs interface to dynamically create
++	  and destroy GPIO-based MMC/SD card devices. It also provides
++	  a platform device interface API.
++	  See Documentation/gpiommc.txt for details.
++
++	  The module will be called gpiommc.
++
++	  If unsure, say N.
++
++config GPIOMMC_CONFIGFS
++	bool
++	depends on GPIOMMC && CONFIGFS_FS
++	default y
++	help
++	  This option automatically enables configfs support for gpiommc
++	  if configfs is available.
++
+ config MMC_CB710
+ 	tristate "ENE CB710 MMC/SD Interface support"
+ 	depends on PCI
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -33,6 +33,7 @@ obj-$(CONFIG_MMC_SDRICOH_CS)	+= sdricoh_
+ obj-$(CONFIG_MMC_TMIO)		+= tmio_mmc.o
+ obj-$(CONFIG_MMC_CB710)	+= cb710-mmc.o
+ obj-$(CONFIG_MMC_VIA_SDMMC)	+= via-sdmmc.o
++obj-$(CONFIG_GPIOMMC)		+= gpiommc.o
+ 
+ ifeq ($(CONFIG_CB710_DEBUG),y)
+ 	CFLAGS-cb710-mmc	+= -DDEBUG
+--- /dev/null
++++ b/include/linux/mmc/gpiommc.h
+@@ -0,0 +1,71 @@
++/*
++ * Device driver for MMC/SD cards driven over a GPIO bus.
++ *
++ * Copyright (c) 2008 Michael Buesch
++ *
++ * Licensed under the GNU/GPL version 2.
++ */
++#ifndef LINUX_GPIOMMC_H_
++#define LINUX_GPIOMMC_H_
++
++#include <linux/types.h>
++
++
++#define GPIOMMC_MAX_NAMELEN		15
++#define GPIOMMC_MAX_NAMELEN_STR		__stringify(GPIOMMC_MAX_NAMELEN)
++
++/**
++ * struct gpiommc_pins - Hardware pin assignments
++ *
++ * @gpio_di: The GPIO number of the DATA IN pin
++ * @gpio_do: The GPIO number of the DATA OUT pin
++ * @gpio_clk: The GPIO number of the CLOCK pin
++ * @gpio_cs: The GPIO number of the CHIPSELECT pin
++ * @cs_activelow: If true, the chip is considered selected if @gpio_cs is low.
++ */
++struct gpiommc_pins {
++	unsigned int gpio_di;
++	unsigned int gpio_do;
++	unsigned int gpio_clk;
++	unsigned int gpio_cs;
++	bool cs_activelow;
++};
++
++/**
++ * struct gpiommc_platform_data - Platform data for a MMC-over-SPI-GPIO device.
++ *
++ * @name: The unique name string of the device.
++ * @pins: The hardware pin assignments.
++ * @mode: The hardware mode. This is either SPI_MODE_0,
++ *        SPI_MODE_1, SPI_MODE_2 or SPI_MODE_3. See the SPI documentation.
++ * @no_spi_delay: Do not use delays in the lowlevel SPI bitbanging code.
++ *                This is not standards compliant, but may be required for some
++ *                embedded machines to gain reasonable speed.
++ * @max_bus_speed: The maximum speed of the SPI bus, in Hertz.
++ */
++struct gpiommc_platform_data {
++	char name[GPIOMMC_MAX_NAMELEN + 1];
++	struct gpiommc_pins pins;
++	u8 mode;
++	bool no_spi_delay;
++	unsigned int max_bus_speed;
++};
++
++/**
++ * GPIOMMC_PLATDEV_NAME - The platform device name string.
++ *
++ * The name string that has to be used for platform_device_alloc
++ * when allocating a gpiommc device.
++ */
++#define GPIOMMC_PLATDEV_NAME	"gpiommc"
++
++/**
++ * gpiommc_next_id - Get another platform device ID number.
++ *
++ * This returns the next platform device ID number that has to be used
++ * for platform_device_alloc. The ID is opaque and should not be used for
++ * anything else.
++ */
++int gpiommc_next_id(void);
++
++#endif /* LINUX_GPIOMMC_H_ */
+--- /dev/null
++++ b/Documentation/gpiommc.txt
+@@ -0,0 +1,97 @@
++GPIOMMC - Driver for an MMC/SD card on a bitbanging GPIO SPI bus
++================================================================
++
++The gpiommc module hooks up the mmc_spi and spi_gpio modules for running an
++MMC or SD card on GPIO pins.
++
++Two interfaces for registering a new MMC/SD card device are provided:
++A static platform-device based mechanism and a dynamic configfs based interface.
++
++
++Registering devices via platform-device
++=======================================
++
++The platform-device interface is used for registering MMC/SD devices that are
++part of the hardware platform. This is most useful only for embedded machines
++with MMC/SD devices statically connected to the platform GPIO bus.
++
++The data structures are declared in <linux/mmc/gpiommc.h>.
++
++To register a new device, define an instance of struct gpiommc_platform_data.
++This structure holds any information about how the device is hooked up to the
++GPIO pins and what hardware modes the device supports. See the docbook-style
++documentation in the header file for more information on the struct fields.
++
++Then allocate a new instance of a platform device by doing:
++
++	pdev = platform_device_alloc(GPIOMMC_PLATDEV_NAME, gpiommc_next_id());
++
++This will allocate the platform device data structures and hook it up to the
++gpiommc driver.
++Then add the gpiommc_platform_data to the platform device.
++
++	err = platform_device_add_data(pdev, pdata, sizeof(struct gpiommc_platform_data));
++
++You may free the local instance of struct gpiommc_platform_data now. (So the
++struct may be allocated on the stack, too).
++Now simply register the platform device.
++
++	err = platform_device_add(pdev);
++
++Done. The gpiommc probe routine will be invoked now and you should see a kernel
++log message for the added device.
++
++
++Registering devices via configfs
++================================
++
++MMC/SD cards connected via GPIO often are a pretty dynamic thing, as for example
++selfmade hacks for soldering an MMC/SD card to standard GPIO pins on embedded
++hardware are a common situation.
++So we provide a dynamic interface to conveniently handle adding and removing
++devices from userspace, without the need to recompile the kernel.
++
++The "gpiommc" subdirectory at the configfs mountpoint is used for handling
++the dynamic configuration.
++
++To create a new device, it must first be allocated with mkdir.
++The following command will allocate a device named "my_mmc":
++	mkdir /config/gpiommc/my_mmc
++
++There are several configuration files available in the new
++/config/gpiommc/my_mmc/ directory:
++
++gpio_data_in			= The SPI data-IN GPIO pin number.
++gpio_data_out			= The SPI data-OUT GPIO pin number.
++gpio_clock			= The SPI Clock GPIO pin number.
++gpio_chipselect			= The SPI Chipselect GPIO pin number.
++gpio_chipselect_activelow	= Boolean. If 0, Chipselect is active-HIGH.
++				  If 1, Chipselect is active-LOW.
++spi_mode			= The SPI data mode. Can be 0-3.
++spi_delay			= Enable all delays in the lowlevel bitbanging.
++max_bus_speed			= The maximum SPI bus speed. In Hertz.
++
++register			= Not a configuration parameter.
++				  Used to register the configured card
++				  with the kernel.
++
++The device must first get configured and then registered by writing "1" to
++the "register" file.
++The configuration parameters "gpio_data_in", "gpio_data_out", "gpio_clock"
++and "gpio_chipselect" are essential and _must_ be configured before writing
++"1" to the "register" file. The registration will fail, otherwise.
++
++The default values for the other parameters are:
++gpio_chipselect_activelow	= 1		(CS active-LOW)
++spi_mode			= 0		(SPI_MODE_0)
++spi_delay			= 1		(enabled)
++max_bus_speed			= 5000000	(5 Mhz)
++
++Configuration values can not be changed after registration. To unregister
++the device, write a "0" to the "register" file. The configuration can be
++changed again after unregistering.
++
++To completely remove the device, simply rmdir the directory
++(/config/gpiommc/my_mmc in this example).
++There's no need to first unregister the device before removing it. That will
++be done automatically.
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -2266,6 +2266,11 @@ T:	git git://git.kernel.org/pub/scm/linu
+ S:	Maintained
+ F:	drivers/media/video/gspca/
+ 
++GPIOMMC DRIVER
++P:	Michael Buesch
++M:	mb@bu3sch.de
++S:	Maintained
++
+ HARDWARE MONITORING
+ L:	lm-sensors@lm-sensors.org
+ W:	http://www.lm-sensors.org/
diff --git a/target/linux/generic/patches-2.6.31/923-gpiommc-configfs-locking.patch b/target/linux/generic/patches-2.6.31/923-gpiommc-configfs-locking.patch
new file mode 100644
index 0000000000..2e4e820b2b
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/923-gpiommc-configfs-locking.patch
@@ -0,0 +1,58 @@
+The gpiommc configfs context structure needs locking, as configfs
+does not lock access between files.
+
+--- a/drivers/mmc/host/gpiommc.c
++++ b/drivers/mmc/host/gpiommc.c
+@@ -143,6 +143,8 @@ struct gpiommc_configfs_device {
+ 	struct platform_device *pdev;
+ 	/* The configuration */
+ 	struct gpiommc_platform_data pdata;
++	/* Mutex to protect this structure */
++	struct mutex mutex;
+ };
+ 
+ #define GPIO_INVALID	-1
+@@ -233,6 +235,8 @@ static ssize_t gpiommc_config_attr_show(
+ 	unsigned int gpio;
+ 	int err = 0;
+ 
++	mutex_lock(&dev->mutex);
++
+ 	if (attr == &gpiommc_attr_DI) {
+ 		gpio = dev->pdata.pins.gpio_di;
+ 		if (gpio == GPIO_INVALID)
+@@ -293,6 +297,8 @@ static ssize_t gpiommc_config_attr_show(
+ 	WARN_ON(1);
+ 	err = -ENOSYS;
+ out:
++	mutex_unlock(&dev->mutex);
++
+ 	return err ? err : count;
+ }
+ 
+@@ -352,6 +358,8 @@ static ssize_t gpiommc_config_attr_store
+ 	int err = -EINVAL;
+ 	unsigned long data;
+ 
++	mutex_lock(&dev->mutex);
++
+ 	if (attr == &gpiommc_attr_register) {
+ 		err = strict_strtoul(page, 10, &data);
+ 		if (err)
+@@ -477,6 +485,8 @@ static ssize_t gpiommc_config_attr_store
+ 	WARN_ON(1);
+ 	err = -ENOSYS;
+ out:
++	mutex_unlock(&dev->mutex);
++
+ 	return err ? err : count;
+ }
+ 
+@@ -513,6 +523,7 @@ static struct config_item *gpiommc_make_
+ 	if (!dev)
+ 		return NULL;
+ 
++	mutex_init(&dev->mutex);
+ 	config_item_init_type_name(&dev->item, name,
+ 				   &gpiommc_dev_ci_type);
+ 
diff --git a/target/linux/generic/patches-2.6.31/924-cs5535_gpio.patch b/target/linux/generic/patches-2.6.31/924-cs5535_gpio.patch
new file mode 100644
index 0000000000..a36ea49933
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/924-cs5535_gpio.patch
@@ -0,0 +1,102 @@
+--- a/drivers/char/cs5535_gpio.c
++++ b/drivers/char/cs5535_gpio.c
+@@ -15,6 +15,7 @@
+ #include <linux/kernel.h>
+ #include <linux/init.h>
+ #include <linux/cdev.h>
++#include <linux/device.h>
+ #include <linux/ioport.h>
+ #include <linux/pci.h>
+ #include <linux/smp_lock.h>
+@@ -48,6 +49,7 @@ static struct pci_device_id divil_pci[]
+ MODULE_DEVICE_TABLE(pci, divil_pci);
+ 
+ static struct cdev cs5535_gpio_cdev;
++static struct class *cs5535_gpio_class;
+ 
+ /* reserve 32 entries even though some aren't usable */
+ #define CS5535_GPIO_COUNT	32
+@@ -66,9 +68,14 @@ static struct gpio_regmap rm[] =
+ 	{ 0x30, 0x00, '1', '0' },	/* GPIOx_READ_BACK / GPIOx_OUT_VAL */
+ 	{ 0x20, 0x20, 'I', 'i' },	/* GPIOx_IN_EN */
+ 	{ 0x04, 0x04, 'O', 'o' },	/* GPIOx_OUT_EN */
++	{ 0x10, 0x10, 'A', 'a' },	/* GPIOx_OUT_AUX1_SEL */
++	{ 0x14, 0x14, 'B', 'b' },	/* GPIOx_OUT_AUX2_SEL */
+ 	{ 0x08, 0x08, 't', 'T' },	/* GPIOx_OUT_OD_EN */
+ 	{ 0x18, 0x18, 'P', 'p' },	/* GPIOx_OUT_PU_EN */
+ 	{ 0x1c, 0x1c, 'D', 'd' },	/* GPIOx_OUT_PD_EN */
++	{ 0x24, 0x24, 'N', 'n' },	/* GPIOx_IN_INV_EN */
++	{ 0x0c, 0x0c, 'X', 'x' },	/* GPIOx_OUT_INV_EN */
++	{ 0x00, 0x00, 'H', 'L' },	/* GPIOx_OUT_VAL */
+ };
+ 
+ 
+@@ -177,7 +184,7 @@ static int __init cs5535_gpio_init(void)
+ {
+ 	dev_t	dev_id;
+ 	u32	low, hi;
+-	int	retval;
++	int	retval, i;
+ 
+ 	if (pci_dev_present(divil_pci) == 0) {
+ 		printk(KERN_WARNING NAME ": DIVIL not found\n");
+@@ -232,23 +239,54 @@ static int __init cs5535_gpio_init(void)
+ 		major = MAJOR(dev_id);
+ 	}
+ 
+-	if (retval) {
+-		release_region(gpio_base, CS5535_GPIO_SIZE);
+-		return -1;
+-	}
++	if (retval)
++		goto error;
+ 
+ 	printk(KERN_DEBUG NAME ": base=%#x mask=%#lx major=%d\n",
+ 	       gpio_base, mask, major);
+ 
+ 	cdev_init(&cs5535_gpio_cdev, &cs5535_gpio_fops);
+-	cdev_add(&cs5535_gpio_cdev, dev_id, CS5535_GPIO_COUNT);
++	retval = cdev_add(&cs5535_gpio_cdev, dev_id, CS5535_GPIO_COUNT);
++	if (retval) {
++		kobject_put(&cs5535_gpio_cdev.kobj);
++		goto error_region;
++	}
++
++	cs5535_gpio_class = class_create(THIS_MODULE, "cs5535_gpio");
++	if (IS_ERR(cs5535_gpio_class)) {
++		printk(KERN_ERR "Error creating cs5535_gpio class\n");
++		cdev_del(&cs5535_gpio_cdev);
++		retval = PTR_ERR(cs5535_gpio_class);
++		goto error_region;
++	}
++
++	for (i = 0; i < CS5535_GPIO_COUNT; i++) {
++		if (mask & (1<<i)) {
++			device_create(cs5535_gpio_class, NULL, MKDEV(major, i), NULL, "cs5535_gpio%d", i);
++		}
++	}
+ 
+ 	return 0;
++
++error_region:
++	unregister_chrdev_region(dev_id, CS5535_GPIO_COUNT);
++error:
++	release_region(gpio_base, CS5535_GPIO_SIZE);
++	return retval;
+ }
+ 
+ static void __exit cs5535_gpio_cleanup(void)
+ {
+ 	dev_t dev_id = MKDEV(major, 0);
++	int i;
++
++	for (i = 0; i < CS5535_GPIO_COUNT; i++) {
++		if (mask & (1<<i)) {
++			device_destroy(cs5535_gpio_class, MKDEV(major, i));
++		}
++	}
++
++	class_destroy(cs5535_gpio_class);
+ 
+ 	cdev_del(&cs5535_gpio_cdev);
+ 	unregister_chrdev_region(dev_id, CS5535_GPIO_COUNT);
diff --git a/target/linux/generic/patches-2.6.31/925-modify-i2c-gpio-initcall-level.patch b/target/linux/generic/patches-2.6.31/925-modify-i2c-gpio-initcall-level.patch
new file mode 100644
index 0000000000..1708e33d01
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/925-modify-i2c-gpio-initcall-level.patch
@@ -0,0 +1,11 @@
+--- a/drivers/i2c/busses/i2c-gpio.c
++++ b/drivers/i2c/busses/i2c-gpio.c
+@@ -210,7 +210,7 @@ static int __init i2c_gpio_init(void)
+ 
+ 	return ret;
+ }
+-module_init(i2c_gpio_init);
++subsys_initcall(i2c_gpio_init);
+ 
+ static void __exit i2c_gpio_exit(void)
+ {
diff --git a/target/linux/generic/patches-2.6.31/940-wireless_mesh_header.patch b/target/linux/generic/patches-2.6.31/940-wireless_mesh_header.patch
new file mode 100644
index 0000000000..73e49a0ff3
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/940-wireless_mesh_header.patch
@@ -0,0 +1,22 @@
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -100,7 +100,7 @@ struct wireless_dev;
+  */
+ 
+ #if defined(CONFIG_WLAN_80211) || defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
+-# if defined(CONFIG_MAC80211_MESH)
++# if 1 || defined(CONFIG_MAC80211_MESH)
+ #  define LL_MAX_HEADER 128
+ # else
+ #  define LL_MAX_HEADER 96
+--- a/include/linux/skbuff.h
++++ b/include/linux/skbuff.h
+@@ -389,7 +389,7 @@ struct sk_buff {
+ #ifdef CONFIG_IPV6_NDISC_NODETYPE
+ 	__u8			ndisc_nodetype:2;
+ #endif
+-#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE)
++#if 1
+ 	__u8			do_not_encrypt:1;
+ #endif
+ 	kmemcheck_bitfield_end(flags2);
diff --git a/target/linux/generic/patches-2.6.31/941-ssb_update.patch b/target/linux/generic/patches-2.6.31/941-ssb_update.patch
new file mode 100644
index 0000000000..b8c8c0674c
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/941-ssb_update.patch
@@ -0,0 +1,505 @@
+--- a/drivers/ssb/driver_chipcommon_pmu.c
++++ b/drivers/ssb/driver_chipcommon_pmu.c
+@@ -28,6 +28,21 @@ static void ssb_chipco_pll_write(struct
+ 	chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value);
+ }
+ 
++static void ssb_chipco_regctl_maskset(struct ssb_chipcommon *cc,
++				   u32 offset, u32 mask, u32 set)
++{
++	u32 value;
++
++	chipco_read32(cc, SSB_CHIPCO_REGCTL_ADDR);
++	chipco_write32(cc, SSB_CHIPCO_REGCTL_ADDR, offset);
++	chipco_read32(cc, SSB_CHIPCO_REGCTL_ADDR);
++	value = chipco_read32(cc, SSB_CHIPCO_REGCTL_DATA);
++	value &= mask;
++	value |= set;
++	chipco_write32(cc, SSB_CHIPCO_REGCTL_DATA, value);
++	chipco_read32(cc, SSB_CHIPCO_REGCTL_DATA);
++}
++
+ struct pmu0_plltab_entry {
+ 	u16 freq;	/* Crystal frequency in kHz.*/
+ 	u8 xf;		/* Crystal frequency value for PMU control */
+@@ -506,3 +521,82 @@ void ssb_pmu_init(struct ssb_chipcommon
+ 	ssb_pmu_pll_init(cc);
+ 	ssb_pmu_resources_init(cc);
+ }
++
++void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
++			     enum ssb_pmu_ldo_volt_id id, u32 voltage)
++{
++	struct ssb_bus *bus = cc->dev->bus;
++	u32 addr, shift, mask;
++
++	switch (bus->chip_id) {
++	case 0x4328:
++	case 0x5354:
++		switch (id) {
++		case LDO_VOLT1:
++			addr = 2;
++			shift = 25;
++			mask = 0xF;
++			break;
++		case LDO_VOLT2:
++			addr = 3;
++			shift = 1;
++			mask = 0xF;
++			break;
++		case LDO_VOLT3:
++			addr = 3;
++			shift = 9;
++			mask = 0xF;
++			break;
++		case LDO_PAREF:
++			addr = 3;
++			shift = 17;
++			mask = 0x3F;
++			break;
++		default:
++			SSB_WARN_ON(1);
++			return;
++		}
++		break;
++	case 0x4312:
++		if (SSB_WARN_ON(id != LDO_PAREF))
++			return;
++		addr = 0;
++		shift = 21;
++		mask = 0x3F;
++		break;
++	default:
++		return;
++	}
++
++	ssb_chipco_regctl_maskset(cc, addr, ~(mask << shift),
++				  (voltage & mask) << shift);
++}
++
++void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on)
++{
++	struct ssb_bus *bus = cc->dev->bus;
++	int ldo;
++
++	switch (bus->chip_id) {
++	case 0x4312:
++		ldo = SSB_PMURES_4312_PA_REF_LDO;
++		break;
++	case 0x4328:
++		ldo = SSB_PMURES_4328_PA_REF_LDO;
++		break;
++	case 0x5354:
++		ldo = SSB_PMURES_5354_PA_REF_LDO;
++		break;
++	default:
++		return;
++	}
++
++	if (on)
++		chipco_set32(cc, SSB_CHIPCO_PMU_MINRES_MSK, 1 << ldo);
++	else
++		chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, ~(1 << ldo));
++	chipco_read32(cc, SSB_CHIPCO_PMU_MINRES_MSK); //SPEC FIXME found via mmiotrace - dummy read?
++}
++
++EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage);
++EXPORT_SYMBOL(ssb_pmu_set_ldo_paref);
+--- a/drivers/ssb/main.c
++++ b/drivers/ssb/main.c
+@@ -469,6 +469,8 @@ static int ssb_devices_register(struct s
+ 			dev->parent = &bus->host_pcmcia->dev;
+ #endif
+ 			break;
++		case SSB_BUSTYPE_SDIO:
++			break;
+ 		case SSB_BUSTYPE_SSB:
+ 			dev->dma_mask = &dev->coherent_dma_mask;
+ 			break;
+@@ -1358,8 +1360,10 @@ static int __init ssb_modinit(void)
+ 	ssb_buses_lock();
+ 	err = ssb_attach_queued_buses();
+ 	ssb_buses_unlock();
+-	if (err)
++	if (err) {
+ 		bus_unregister(&ssb_bustype);
++		goto out;
++	}
+ 
+ 	err = b43_pci_ssb_bridge_init();
+ 	if (err) {
+@@ -1375,7 +1379,7 @@ static int __init ssb_modinit(void)
+ 		/* don't fail SSB init because of this */
+ 		err = 0;
+ 	}
+-
++out:
+ 	return err;
+ }
+ /* ssb must be initialized after PCI but before the ssb drivers.
+--- a/drivers/ssb/pci.c
++++ b/drivers/ssb/pci.c
+@@ -169,8 +169,14 @@ err_pci:
+ /* Get the word-offset for a SSB_SPROM_XXX define. */
+ #define SPOFF(offset)	(((offset) - SSB_SPROM_BASE) / sizeof(u16))
+ /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
+-#define SPEX(_outvar, _offset, _mask, _shift)	\
++#define SPEX16(_outvar, _offset, _mask, _shift)	\
+ 	out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
++#define SPEX32(_outvar, _offset, _mask, _shift)	\
++	out->_outvar = ((((u32)in[SPOFF((_offset)+2)] << 16 | \
++			   in[SPOFF(_offset)]) & (_mask)) >> (_shift))
++#define SPEX(_outvar, _offset, _mask, _shift) \
++	SPEX16(_outvar, _offset, _mask, _shift)
++
+ 
+ static inline u8 ssb_crc8(u8 crc, u8 data)
+ {
+@@ -474,12 +480,14 @@ static void sprom_extract_r8(struct ssb_
+ 
+ 	/* extract the MAC address */
+ 	for (i = 0; i < 3; i++) {
+-		v = in[SPOFF(SSB_SPROM1_IL0MAC) + i];
++		v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
+ 		*(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+ 	}
+ 	SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0);
+ 	SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
+ 	SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0);
++	SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0);
++	SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, 0xFFFF, 0);
+ 	SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A,
+ 	     SSB_SPROM8_ANTAVAIL_A_SHIFT);
+ 	SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG,
+@@ -490,12 +498,55 @@ static void sprom_extract_r8(struct ssb_
+ 	SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0);
+ 	SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A,
+ 	     SSB_SPROM8_ITSSI_A_SHIFT);
++	SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0);
++	SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK,
++	     SSB_SPROM8_MAXP_AL_SHIFT);
+ 	SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0);
+ 	SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1,
+ 	     SSB_SPROM8_GPIOA_P1_SHIFT);
+ 	SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0);
+ 	SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3,
+ 	     SSB_SPROM8_GPIOB_P3_SHIFT);
++	SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0);
++	SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G,
++	     SSB_SPROM8_TRI5G_SHIFT);
++	SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0);
++	SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH,
++	     SSB_SPROM8_TRI5GH_SHIFT);
++	SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, 0);
++	SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G,
++	     SSB_SPROM8_RXPO5G_SHIFT);
++	SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0);
++	SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G,
++	     SSB_SPROM8_RSSISMC2G_SHIFT);
++	SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G,
++	     SSB_SPROM8_RSSISAV2G_SHIFT);
++	SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G,
++	     SSB_SPROM8_BXA2G_SHIFT);
++	SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0);
++	SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G,
++	     SSB_SPROM8_RSSISMC5G_SHIFT);
++	SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G,
++	     SSB_SPROM8_RSSISAV5G_SHIFT);
++	SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G,
++	     SSB_SPROM8_BXA5G_SHIFT);
++	SPEX(pa0b0, SSB_SPROM8_PA0B0, 0xFFFF, 0);
++	SPEX(pa0b1, SSB_SPROM8_PA0B1, 0xFFFF, 0);
++	SPEX(pa0b2, SSB_SPROM8_PA0B2, 0xFFFF, 0);
++	SPEX(pa1b0, SSB_SPROM8_PA1B0, 0xFFFF, 0);
++	SPEX(pa1b1, SSB_SPROM8_PA1B1, 0xFFFF, 0);
++	SPEX(pa1b2, SSB_SPROM8_PA1B2, 0xFFFF, 0);
++	SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, 0xFFFF, 0);
++	SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, 0xFFFF, 0);
++	SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, 0xFFFF, 0);
++	SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, 0xFFFF, 0);
++	SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, 0xFFFF, 0);
++	SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, 0xFFFF, 0);
++	SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, 0xFFFF, 0);
++	SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, 0xFFFFFFFF, 0);
++	SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, 0xFFFFFFFF, 0);
++	SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, 0xFFFFFFFF, 0);
++	SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
+ 
+ 	/* Extract the antenna gain values. */
+ 	SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01,
+@@ -549,6 +600,7 @@ static int sprom_extract(struct ssb_bus
+ 			ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
+ 				   "  revision %d detected. Will extract"
+ 				   " v1\n", out->revision);
++			out->revision = 1;
+ 			sprom_extract_r123(out, in);
+ 		}
+ 	}
+--- a/drivers/ssb/scan.c
++++ b/drivers/ssb/scan.c
+@@ -175,6 +175,8 @@ static u32 scan_read32(struct ssb_bus *b
+ 		} else
+ 			ssb_pcmcia_switch_segment(bus, 0);
+ 		break;
++	case SSB_BUSTYPE_SDIO:
++		break;
+ 	}
+ 	return readl(bus->mmio + offset);
+ }
+@@ -188,6 +190,8 @@ static int scan_switchcore(struct ssb_bu
+ 		return ssb_pci_switch_coreidx(bus, coreidx);
+ 	case SSB_BUSTYPE_PCMCIA:
+ 		return ssb_pcmcia_switch_coreidx(bus, coreidx);
++	case SSB_BUSTYPE_SDIO:
++		break;
+ 	}
+ 	return 0;
+ }
+@@ -206,6 +210,8 @@ void ssb_iounmap(struct ssb_bus *bus)
+ 		SSB_BUG_ON(1); /* Can't reach this code. */
+ #endif
+ 		break;
++	case SSB_BUSTYPE_SDIO:
++		break;
+ 	}
+ 	bus->mmio = NULL;
+ 	bus->mapped_device = NULL;
+@@ -230,6 +236,8 @@ static void __iomem *ssb_ioremap(struct
+ 		SSB_BUG_ON(1); /* Can't reach this code. */
+ #endif
+ 		break;
++	case SSB_BUSTYPE_SDIO:
++		break;
+ 	}
+ 
+ 	return mmio;
+--- a/include/linux/ssb/ssb.h
++++ b/include/linux/ssb/ssb.h
+@@ -27,24 +27,54 @@ struct ssb_sprom {
+ 	u8 et1mdcport;		/* MDIO for enet1 */
+ 	u8 board_rev;		/* Board revision number from SPROM. */
+ 	u8 country_code;	/* Country Code */
+-	u8 ant_available_a;	/* A-PHY antenna available bits (up to 4) */
+-	u8 ant_available_bg;	/* B/G-PHY antenna available bits (up to 4) */
++	u8 ant_available_a;	/* 2GHz antenna available bits (up to 4) */
++	u8 ant_available_bg;	/* 5GHz antenna available bits (up to 4) */
+ 	u16 pa0b0;
+ 	u16 pa0b1;
+ 	u16 pa0b2;
+ 	u16 pa1b0;
+ 	u16 pa1b1;
+ 	u16 pa1b2;
++	u16 pa1lob0;
++	u16 pa1lob1;
++	u16 pa1lob2;
++	u16 pa1hib0;
++	u16 pa1hib1;
++	u16 pa1hib2;
+ 	u8 gpio0;		/* GPIO pin 0 */
+ 	u8 gpio1;		/* GPIO pin 1 */
+ 	u8 gpio2;		/* GPIO pin 2 */
+ 	u8 gpio3;		/* GPIO pin 3 */
+-	u16 maxpwr_a;		/* A-PHY Amplifier Max Power (in dBm Q5.2) */
+-	u16 maxpwr_bg;		/* B/G-PHY Amplifier Max Power (in dBm Q5.2) */
++	u16 maxpwr_bg;		/* 2.4GHz Amplifier Max Power (in dBm Q5.2) */
++	u16 maxpwr_al;		/* 5.2GHz Amplifier Max Power (in dBm Q5.2) */
++	u16 maxpwr_a;		/* 5.3GHz Amplifier Max Power (in dBm Q5.2) */
++	u16 maxpwr_ah;		/* 5.8GHz Amplifier Max Power (in dBm Q5.2) */
+ 	u8 itssi_a;		/* Idle TSSI Target for A-PHY */
+ 	u8 itssi_bg;		/* Idle TSSI Target for B/G-PHY */
+-	u16 boardflags_lo;	/* Boardflags (low 16 bits) */
+-	u16 boardflags_hi;	/* Boardflags (high 16 bits) */
++	u8 tri2g;		/* 2.4GHz TX isolation */
++	u8 tri5gl;		/* 5.2GHz TX isolation */
++	u8 tri5g;		/* 5.3GHz TX isolation */
++	u8 tri5gh;		/* 5.8GHz TX isolation */
++	u8 rxpo2g;		/* 2GHz RX power offset */
++	u8 rxpo5g;		/* 5GHz RX power offset */
++	u8 rssisav2g;		/* 2GHz RSSI params */
++	u8 rssismc2g;
++	u8 rssismf2g;
++	u8 bxa2g;		/* 2GHz BX arch */
++	u8 rssisav5g;		/* 5GHz RSSI params */
++	u8 rssismc5g;
++	u8 rssismf5g;
++	u8 bxa5g;		/* 5GHz BX arch */
++	u16 cck2gpo;		/* CCK power offset */
++	u32 ofdm2gpo;		/* 2.4GHz OFDM power offset */
++	u32 ofdm5glpo;		/* 5.2GHz OFDM power offset */
++	u32 ofdm5gpo;		/* 5.3GHz OFDM power offset */
++	u32 ofdm5ghpo;		/* 5.8GHz OFDM power offset */
++	u16 boardflags_lo;	/* Board flags (bits 0-15) */
++	u16 boardflags_hi;	/* Board flags (bits 16-31) */
++	u16 boardflags2_lo;	/* Board flags (bits 32-47) */
++	u16 boardflags2_hi;	/* Board flags (bits 48-63) */
++	/* TODO store board flags in a single u64 */
+ 
+ 	/* Antenna gain values for up to 4 antennas
+ 	 * on each band. Values in dBm/4 (Q5.2). Negative gain means the
+@@ -58,7 +88,7 @@ struct ssb_sprom {
+ 		} ghz5;		/* 5GHz band */
+ 	} antenna_gain;
+ 
+-	/* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */
++	/* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
+ };
+ 
+ /* Information about the PCB the circuitry is soldered on. */
+@@ -208,6 +238,7 @@ enum ssb_bustype {
+ 	SSB_BUSTYPE_SSB,	/* This SSB bus is the system bus */
+ 	SSB_BUSTYPE_PCI,	/* SSB is connected to PCI bus */
+ 	SSB_BUSTYPE_PCMCIA,	/* SSB is connected to PCMCIA bus */
++	SSB_BUSTYPE_SDIO,	/* SSB is connected to SDIO bus */
+ };
+ 
+ /* board_vendor */
+@@ -240,8 +271,12 @@ struct ssb_bus {
+ 
+ 	/* The core in the basic address register window. (PCI bus only) */
+ 	struct ssb_device *mapped_device;
+-	/* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
+-	u8 mapped_pcmcia_seg;
++	union {
++		/* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
++		u8 mapped_pcmcia_seg;
++		/* Current SSB base address window for SDIO. */
++		u32 sdio_sbaddr;
++	};
+ 	/* Lock for core and segment switching.
+ 	 * On PCMCIA-host busses this is used to protect the whole MMIO access. */
+ 	spinlock_t bar_lock;
+@@ -252,6 +287,11 @@ struct ssb_bus {
+ 	struct pci_dev *host_pci;
+ 	/* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
+ 	struct pcmcia_device *host_pcmcia;
++	/* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */
++	struct sdio_func *host_sdio;
++
++	/* See enum ssb_quirks */
++	unsigned int quirks;
+ 
+ #ifdef CONFIG_SSB_SPROM
+ 	/* Mutex to protect the SPROM writing. */
+@@ -306,6 +346,11 @@ struct ssb_bus {
+ #endif /* DEBUG */
+ };
+ 
++enum ssb_quirks {
++	/* SDIO connected card requires performing a read after writing a 32-bit value */
++	SSB_QUIRK_SDIO_READ_AFTER_WRITE32	= (1 << 0),
++};
++
+ /* The initialization-invariants. */
+ struct ssb_init_invariants {
+ 	/* Versioning information about the PCB. */
+--- a/include/linux/ssb/ssb_driver_chipcommon.h
++++ b/include/linux/ssb/ssb_driver_chipcommon.h
+@@ -629,5 +629,15 @@ extern int ssb_chipco_serial_init(struct
+ /* PMU support */
+ extern void ssb_pmu_init(struct ssb_chipcommon *cc);
+ 
++enum ssb_pmu_ldo_volt_id {
++	LDO_PAREF = 0,
++	LDO_VOLT1,
++	LDO_VOLT2,
++	LDO_VOLT3,
++};
++
++void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
++			     enum ssb_pmu_ldo_volt_id id, u32 voltage);
++void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on);
+ 
+ #endif /* LINUX_SSB_CHIPCO_H_ */
+--- a/include/linux/ssb/ssb_regs.h
++++ b/include/linux/ssb/ssb_regs.h
+@@ -162,7 +162,7 @@
+ 
+ /* SPROM shadow area. If not otherwise noted, fields are
+  * two bytes wide. Note that the SPROM can _only_ be read
+- * in two-byte quantinies.
++ * in two-byte quantities.
+  */
+ #define SSB_SPROMSIZE_WORDS		64
+ #define SSB_SPROMSIZE_BYTES		(SSB_SPROMSIZE_WORDS * sizeof(u16))
+@@ -327,8 +327,11 @@
+ #define  SSB_SPROM5_GPIOB_P3_SHIFT	8
+ 
+ /* SPROM Revision 8 */
+-#define SSB_SPROM8_BFLLO		0x1084	/* Boardflags (low 16 bits) */
+-#define SSB_SPROM8_BFLHI		0x1086	/* Boardflags Hi */
++#define SSB_SPROM8_BOARDREV		0x1082	/* Board revision */
++#define SSB_SPROM8_BFLLO		0x1084	/* Board flags (bits 0-15) */
++#define SSB_SPROM8_BFLHI		0x1086	/* Board flags (bits 16-31) */
++#define SSB_SPROM8_BFL2LO		0x1088	/* Board flags (bits 32-47) */
++#define SSB_SPROM8_BFL2HI		0x108A	/* Board flags (bits 48-63) */
+ #define SSB_SPROM8_IL0MAC		0x108C	/* 6 byte MAC address */
+ #define SSB_SPROM8_CCODE		0x1092	/* 2 byte country code */
+ #define SSB_SPROM8_ANTAVAIL		0x109C  /* Antenna available bitfields*/
+@@ -354,14 +357,63 @@
+ #define  SSB_SPROM8_GPIOB_P2		0x00FF	/* Pin 2 */
+ #define  SSB_SPROM8_GPIOB_P3		0xFF00	/* Pin 3 */
+ #define  SSB_SPROM8_GPIOB_P3_SHIFT	8
+-#define SSB_SPROM8_MAXP_BG		0x10C0  /* Max Power BG in path 1 */
+-#define  SSB_SPROM8_MAXP_BG_MASK	0x00FF  /* Mask for Max Power BG */
++#define SSB_SPROM8_RSSIPARM2G		0x10A4	/* RSSI params for 2GHz */
++#define  SSB_SPROM8_RSSISMF2G		0x000F
++#define  SSB_SPROM8_RSSISMC2G		0x00F0
++#define  SSB_SPROM8_RSSISMC2G_SHIFT	4
++#define  SSB_SPROM8_RSSISAV2G		0x0700
++#define  SSB_SPROM8_RSSISAV2G_SHIFT	8
++#define  SSB_SPROM8_BXA2G		0x1800
++#define  SSB_SPROM8_BXA2G_SHIFT		11
++#define SSB_SPROM8_RSSIPARM5G		0x10A6	/* RSSI params for 5GHz */
++#define  SSB_SPROM8_RSSISMF5G		0x000F
++#define  SSB_SPROM8_RSSISMC5G		0x00F0
++#define  SSB_SPROM8_RSSISMC5G_SHIFT	4
++#define  SSB_SPROM8_RSSISAV5G		0x0700
++#define  SSB_SPROM8_RSSISAV5G_SHIFT	8
++#define  SSB_SPROM8_BXA5G		0x1800
++#define  SSB_SPROM8_BXA5G_SHIFT		11
++#define SSB_SPROM8_TRI25G		0x10A8	/* TX isolation 2.4&5.3GHz */
++#define  SSB_SPROM8_TRI2G		0x00FF	/* TX isolation 2.4GHz */
++#define  SSB_SPROM8_TRI5G		0xFF00	/* TX isolation 5.3GHz */
++#define  SSB_SPROM8_TRI5G_SHIFT		8
++#define SSB_SPROM8_TRI5GHL		0x10AA	/* TX isolation 5.2/5.8GHz */
++#define  SSB_SPROM8_TRI5GL		0x00FF	/* TX isolation 5.2GHz */
++#define  SSB_SPROM8_TRI5GH		0xFF00	/* TX isolation 5.8GHz */
++#define  SSB_SPROM8_TRI5GH_SHIFT	8
++#define SSB_SPROM8_RXPO			0x10AC  /* RX power offsets */
++#define  SSB_SPROM8_RXPO2G		0x00FF	/* 2GHz RX power offset */
++#define  SSB_SPROM8_RXPO5G		0xFF00	/* 5GHz RX power offset */
++#define  SSB_SPROM8_RXPO5G_SHIFT	8
++#define SSB_SPROM8_MAXP_BG		0x10C0  /* Max Power 2GHz in path 1 */
++#define  SSB_SPROM8_MAXP_BG_MASK	0x00FF  /* Mask for Max Power 2GHz */
+ #define  SSB_SPROM8_ITSSI_BG		0xFF00	/* Mask for path 1 itssi_bg */
+ #define  SSB_SPROM8_ITSSI_BG_SHIFT	8
+-#define SSB_SPROM8_MAXP_A		0x10C8  /* Max Power A in path 1 */
+-#define  SSB_SPROM8_MAXP_A_MASK		0x00FF  /* Mask for Max Power A */
++#define SSB_SPROM8_PA0B0		0x10C2	/* 2GHz power amp settings */
++#define SSB_SPROM8_PA0B1		0x10C4
++#define SSB_SPROM8_PA0B2		0x10C6
++#define SSB_SPROM8_MAXP_A		0x10C8  /* Max Power 5.3GHz */
++#define  SSB_SPROM8_MAXP_A_MASK		0x00FF  /* Mask for Max Power 5.3GHz */
+ #define  SSB_SPROM8_ITSSI_A		0xFF00	/* Mask for path 1 itssi_a */
+ #define  SSB_SPROM8_ITSSI_A_SHIFT	8
++#define SSB_SPROM8_MAXP_AHL		0x10CA  /* Max Power 5.2/5.8GHz */
++#define  SSB_SPROM8_MAXP_AH_MASK	0x00FF  /* Mask for Max Power 5.8GHz */
++#define  SSB_SPROM8_MAXP_AL_MASK	0xFF00  /* Mask for Max Power 5.2GHz */
++#define  SSB_SPROM8_MAXP_AL_SHIFT	8
++#define SSB_SPROM8_PA1B0		0x10CC	/* 5.3GHz power amp settings */
++#define SSB_SPROM8_PA1B1		0x10CE
++#define SSB_SPROM8_PA1B2		0x10D0
++#define SSB_SPROM8_PA1LOB0		0x10D2	/* 5.2GHz power amp settings */
++#define SSB_SPROM8_PA1LOB1		0x10D4
++#define SSB_SPROM8_PA1LOB2		0x10D6
++#define SSB_SPROM8_PA1HIB0		0x10D8	/* 5.8GHz power amp settings */
++#define SSB_SPROM8_PA1HIB1		0x10DA
++#define SSB_SPROM8_PA1HIB2		0x10DC
++#define SSB_SPROM8_CCK2GPO		0x1140	/* CCK power offset */
++#define SSB_SPROM8_OFDM2GPO		0x1142	/* 2.4GHz OFDM power offset */
++#define SSB_SPROM8_OFDM5GPO		0x1146	/* 5.3GHz OFDM power offset */
++#define SSB_SPROM8_OFDM5GLPO		0x114A	/* 5.2GHz OFDM power offset */
++#define SSB_SPROM8_OFDM5GHPO		0x114E	/* 5.8GHz OFDM power offset */
+ 
+ /* Values for SSB_SPROM1_BINF_CCODE */
+ enum {
diff --git a/target/linux/generic/patches-2.6.31/951-revert_gcc4_4_fixes.patch b/target/linux/generic/patches-2.6.31/951-revert_gcc4_4_fixes.patch
new file mode 100644
index 0000000000..1bf19cc764
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/951-revert_gcc4_4_fixes.patch
@@ -0,0 +1,524 @@
+--- a/arch/powerpc/boot/crtsavres.S
++++ /dev/null
+@@ -1,233 +0,0 @@
+-/*
+- * Special support for eabi and SVR4
+- *
+- *   Copyright (C) 1995, 1996, 1998, 2000, 2001 Free Software Foundation, Inc.
+- *   Copyright 2008 Freescale Semiconductor, Inc.
+- *   Written By Michael Meissner
+- *
+- * Based on gcc/config/rs6000/crtsavres.asm from gcc
+- *
+- * This file is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License as published by the
+- * Free Software Foundation; either version 2, or (at your option) any
+- * later version.
+- *
+- * In addition to the permissions in the GNU General Public License, the
+- * Free Software Foundation gives you unlimited permission to link the
+- * compiled version of this file with other programs, and to distribute
+- * those programs without any restriction coming from the use of this
+- * file.  (The General Public License restrictions do apply in other
+- * respects; for example, they cover modification of the file, and
+- * distribution when not linked into another program.)
+- *
+- * This file is distributed in the hope that it will be useful, but
+- * WITHOUT ANY WARRANTY; without even the implied warranty of
+- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+- * General Public License for more details.
+- *
+- * You should have received a copy of the GNU General Public License
+- * along with this program; see the file COPYING.  If not, write to
+- * the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+- * Boston, MA 02110-1301, USA.
+- *
+- *    As a special exception, if you link this library with files
+- *    compiled with GCC to produce an executable, this does not cause
+- *    the resulting executable to be covered by the GNU General Public License.
+- *    This exception does not however invalidate any other reasons why
+- *    the executable file might be covered by the GNU General Public License.
+- */
+-
+-	.file	"crtsavres.S"
+-	.section ".text"
+-
+-/* On PowerPC64 Linux, these functions are provided by the linker.  */
+-#ifndef __powerpc64__
+-
+-#define _GLOBAL(name) \
+-	.type name,@function; \
+-	.globl name; \
+-name:
+-
+-/* Routines for saving integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer save area.  */
+-
+-_GLOBAL(_savegpr_14)
+-_GLOBAL(_save32gpr_14)
+-	stw	14,-72(11)	/* save gp registers */
+-_GLOBAL(_savegpr_15)
+-_GLOBAL(_save32gpr_15)
+-	stw	15,-68(11)
+-_GLOBAL(_savegpr_16)
+-_GLOBAL(_save32gpr_16)
+-	stw	16,-64(11)
+-_GLOBAL(_savegpr_17)
+-_GLOBAL(_save32gpr_17)
+-	stw	17,-60(11)
+-_GLOBAL(_savegpr_18)
+-_GLOBAL(_save32gpr_18)
+-	stw	18,-56(11)
+-_GLOBAL(_savegpr_19)
+-_GLOBAL(_save32gpr_19)
+-	stw	19,-52(11)
+-_GLOBAL(_savegpr_20)
+-_GLOBAL(_save32gpr_20)
+-	stw	20,-48(11)
+-_GLOBAL(_savegpr_21)
+-_GLOBAL(_save32gpr_21)
+-	stw	21,-44(11)
+-_GLOBAL(_savegpr_22)
+-_GLOBAL(_save32gpr_22)
+-	stw	22,-40(11)
+-_GLOBAL(_savegpr_23)
+-_GLOBAL(_save32gpr_23)
+-	stw	23,-36(11)
+-_GLOBAL(_savegpr_24)
+-_GLOBAL(_save32gpr_24)
+-	stw	24,-32(11)
+-_GLOBAL(_savegpr_25)
+-_GLOBAL(_save32gpr_25)
+-	stw	25,-28(11)
+-_GLOBAL(_savegpr_26)
+-_GLOBAL(_save32gpr_26)
+-	stw	26,-24(11)
+-_GLOBAL(_savegpr_27)
+-_GLOBAL(_save32gpr_27)
+-	stw	27,-20(11)
+-_GLOBAL(_savegpr_28)
+-_GLOBAL(_save32gpr_28)
+-	stw	28,-16(11)
+-_GLOBAL(_savegpr_29)
+-_GLOBAL(_save32gpr_29)
+-	stw	29,-12(11)
+-_GLOBAL(_savegpr_30)
+-_GLOBAL(_save32gpr_30)
+-	stw	30,-8(11)
+-_GLOBAL(_savegpr_31)
+-_GLOBAL(_save32gpr_31)
+-	stw	31,-4(11)
+-	blr
+-
+-/* Routines for restoring integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer restore area.  */
+-
+-_GLOBAL(_restgpr_14)
+-_GLOBAL(_rest32gpr_14)
+-	lwz	14,-72(11)	/* restore gp registers */
+-_GLOBAL(_restgpr_15)
+-_GLOBAL(_rest32gpr_15)
+-	lwz	15,-68(11)
+-_GLOBAL(_restgpr_16)
+-_GLOBAL(_rest32gpr_16)
+-	lwz	16,-64(11)
+-_GLOBAL(_restgpr_17)
+-_GLOBAL(_rest32gpr_17)
+-	lwz	17,-60(11)
+-_GLOBAL(_restgpr_18)
+-_GLOBAL(_rest32gpr_18)
+-	lwz	18,-56(11)
+-_GLOBAL(_restgpr_19)
+-_GLOBAL(_rest32gpr_19)
+-	lwz	19,-52(11)
+-_GLOBAL(_restgpr_20)
+-_GLOBAL(_rest32gpr_20)
+-	lwz	20,-48(11)
+-_GLOBAL(_restgpr_21)
+-_GLOBAL(_rest32gpr_21)
+-	lwz	21,-44(11)
+-_GLOBAL(_restgpr_22)
+-_GLOBAL(_rest32gpr_22)
+-	lwz	22,-40(11)
+-_GLOBAL(_restgpr_23)
+-_GLOBAL(_rest32gpr_23)
+-	lwz	23,-36(11)
+-_GLOBAL(_restgpr_24)
+-_GLOBAL(_rest32gpr_24)
+-	lwz	24,-32(11)
+-_GLOBAL(_restgpr_25)
+-_GLOBAL(_rest32gpr_25)
+-	lwz	25,-28(11)
+-_GLOBAL(_restgpr_26)
+-_GLOBAL(_rest32gpr_26)
+-	lwz	26,-24(11)
+-_GLOBAL(_restgpr_27)
+-_GLOBAL(_rest32gpr_27)
+-	lwz	27,-20(11)
+-_GLOBAL(_restgpr_28)
+-_GLOBAL(_rest32gpr_28)
+-	lwz	28,-16(11)
+-_GLOBAL(_restgpr_29)
+-_GLOBAL(_rest32gpr_29)
+-	lwz	29,-12(11)
+-_GLOBAL(_restgpr_30)
+-_GLOBAL(_rest32gpr_30)
+-	lwz	30,-8(11)
+-_GLOBAL(_restgpr_31)
+-_GLOBAL(_rest32gpr_31)
+-	lwz	31,-4(11)
+-	blr
+-
+-/* Routines for restoring integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer restore area.  */
+-
+-_GLOBAL(_restgpr_14_x)
+-_GLOBAL(_rest32gpr_14_x)
+-	lwz	14,-72(11)	/* restore gp registers */
+-_GLOBAL(_restgpr_15_x)
+-_GLOBAL(_rest32gpr_15_x)
+-	lwz	15,-68(11)
+-_GLOBAL(_restgpr_16_x)
+-_GLOBAL(_rest32gpr_16_x)
+-	lwz	16,-64(11)
+-_GLOBAL(_restgpr_17_x)
+-_GLOBAL(_rest32gpr_17_x)
+-	lwz	17,-60(11)
+-_GLOBAL(_restgpr_18_x)
+-_GLOBAL(_rest32gpr_18_x)
+-	lwz	18,-56(11)
+-_GLOBAL(_restgpr_19_x)
+-_GLOBAL(_rest32gpr_19_x)
+-	lwz	19,-52(11)
+-_GLOBAL(_restgpr_20_x)
+-_GLOBAL(_rest32gpr_20_x)
+-	lwz	20,-48(11)
+-_GLOBAL(_restgpr_21_x)
+-_GLOBAL(_rest32gpr_21_x)
+-	lwz	21,-44(11)
+-_GLOBAL(_restgpr_22_x)
+-_GLOBAL(_rest32gpr_22_x)
+-	lwz	22,-40(11)
+-_GLOBAL(_restgpr_23_x)
+-_GLOBAL(_rest32gpr_23_x)
+-	lwz	23,-36(11)
+-_GLOBAL(_restgpr_24_x)
+-_GLOBAL(_rest32gpr_24_x)
+-	lwz	24,-32(11)
+-_GLOBAL(_restgpr_25_x)
+-_GLOBAL(_rest32gpr_25_x)
+-	lwz	25,-28(11)
+-_GLOBAL(_restgpr_26_x)
+-_GLOBAL(_rest32gpr_26_x)
+-	lwz	26,-24(11)
+-_GLOBAL(_restgpr_27_x)
+-_GLOBAL(_rest32gpr_27_x)
+-	lwz	27,-20(11)
+-_GLOBAL(_restgpr_28_x)
+-_GLOBAL(_rest32gpr_28_x)
+-	lwz	28,-16(11)
+-_GLOBAL(_restgpr_29_x)
+-_GLOBAL(_rest32gpr_29_x)
+-	lwz	29,-12(11)
+-_GLOBAL(_restgpr_30_x)
+-_GLOBAL(_rest32gpr_30_x)
+-	lwz	30,-8(11)
+-_GLOBAL(_restgpr_31_x)
+-_GLOBAL(_rest32gpr_31_x)
+-	lwz	0,4(11)
+-	lwz	31,-4(11)
+-	mtlr	0
+-	mr	1,11
+-	blr
+-#endif
+--- a/arch/powerpc/boot/Makefile
++++ b/arch/powerpc/boot/Makefile
+@@ -59,7 +59,7 @@ libfdtheader := fdt.h libfdt.h libfdt_in
+ $(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o): \
+ 	$(addprefix $(obj)/,$(libfdtheader))
+ 
+-src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
++src-wlib := string.S crt0.S stdio.c main.c \
+ 		$(libfdt) libfdt-wrapper.c \
+ 		ns16550.c serial.c simple_alloc.c div64.S util.S \
+ 		gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
+--- a/arch/powerpc/kernel/prom_init_check.sh
++++ b/arch/powerpc/kernel/prom_init_check.sh
+@@ -48,20 +48,6 @@ do
+ 		fi
+ 	done
+ 
+-	# ignore register save/restore funcitons
+-	if [ "${UNDEF:0:9}" = "_restgpr_" ]; then
+-		OK=1
+-	fi
+-	if [ "${UNDEF:0:11}" = "_rest32gpr_" ]; then
+-		OK=1
+-	fi
+-	if [ "${UNDEF:0:9}" = "_savegpr_" ]; then
+-		OK=1
+-	fi
+-	if [ "${UNDEF:0:11}" = "_save32gpr_" ]; then
+-		OK=1
+-	fi
+-
+ 	if [ $OK -eq 0 ]; then
+ 		ERROR=1
+ 		echo "Error: External symbol '$UNDEF' referenced" \
+--- a/arch/powerpc/lib/crtsavres.S
++++ /dev/null
+@@ -1,229 +0,0 @@
+-/*
+- * Special support for eabi and SVR4
+- *
+- *   Copyright (C) 1995, 1996, 1998, 2000, 2001 Free Software Foundation, Inc.
+- *   Copyright 2008 Freescale Semiconductor, Inc.
+- *   Written By Michael Meissner
+- *
+- * Based on gcc/config/rs6000/crtsavres.asm from gcc
+- *
+- * This file is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License as published by the
+- * Free Software Foundation; either version 2, or (at your option) any
+- * later version.
+- *
+- * In addition to the permissions in the GNU General Public License, the
+- * Free Software Foundation gives you unlimited permission to link the
+- * compiled version of this file with other programs, and to distribute
+- * those programs without any restriction coming from the use of this
+- * file.  (The General Public License restrictions do apply in other
+- * respects; for example, they cover modification of the file, and
+- * distribution when not linked into another program.)
+- *
+- * This file is distributed in the hope that it will be useful, but
+- * WITHOUT ANY WARRANTY; without even the implied warranty of
+- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+- * General Public License for more details.
+- *
+- * You should have received a copy of the GNU General Public License
+- * along with this program; see the file COPYING.  If not, write to
+- * the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+- * Boston, MA 02110-1301, USA.
+- *
+- *    As a special exception, if you link this library with files
+- *    compiled with GCC to produce an executable, this does not cause
+- *    the resulting executable to be covered by the GNU General Public License.
+- *    This exception does not however invalidate any other reasons why
+- *    the executable file might be covered by the GNU General Public License.
+- */
+-
+-#include <asm/ppc_asm.h>
+-
+-	.file	"crtsavres.S"
+-	.section ".text"
+-
+-#ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+-
+-/* Routines for saving integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer save area.  */
+-
+-_GLOBAL(_savegpr_14)
+-_GLOBAL(_save32gpr_14)
+-	stw	14,-72(11)	/* save gp registers */
+-_GLOBAL(_savegpr_15)
+-_GLOBAL(_save32gpr_15)
+-	stw	15,-68(11)
+-_GLOBAL(_savegpr_16)
+-_GLOBAL(_save32gpr_16)
+-	stw	16,-64(11)
+-_GLOBAL(_savegpr_17)
+-_GLOBAL(_save32gpr_17)
+-	stw	17,-60(11)
+-_GLOBAL(_savegpr_18)
+-_GLOBAL(_save32gpr_18)
+-	stw	18,-56(11)
+-_GLOBAL(_savegpr_19)
+-_GLOBAL(_save32gpr_19)
+-	stw	19,-52(11)
+-_GLOBAL(_savegpr_20)
+-_GLOBAL(_save32gpr_20)
+-	stw	20,-48(11)
+-_GLOBAL(_savegpr_21)
+-_GLOBAL(_save32gpr_21)
+-	stw	21,-44(11)
+-_GLOBAL(_savegpr_22)
+-_GLOBAL(_save32gpr_22)
+-	stw	22,-40(11)
+-_GLOBAL(_savegpr_23)
+-_GLOBAL(_save32gpr_23)
+-	stw	23,-36(11)
+-_GLOBAL(_savegpr_24)
+-_GLOBAL(_save32gpr_24)
+-	stw	24,-32(11)
+-_GLOBAL(_savegpr_25)
+-_GLOBAL(_save32gpr_25)
+-	stw	25,-28(11)
+-_GLOBAL(_savegpr_26)
+-_GLOBAL(_save32gpr_26)
+-	stw	26,-24(11)
+-_GLOBAL(_savegpr_27)
+-_GLOBAL(_save32gpr_27)
+-	stw	27,-20(11)
+-_GLOBAL(_savegpr_28)
+-_GLOBAL(_save32gpr_28)
+-	stw	28,-16(11)
+-_GLOBAL(_savegpr_29)
+-_GLOBAL(_save32gpr_29)
+-	stw	29,-12(11)
+-_GLOBAL(_savegpr_30)
+-_GLOBAL(_save32gpr_30)
+-	stw	30,-8(11)
+-_GLOBAL(_savegpr_31)
+-_GLOBAL(_save32gpr_31)
+-	stw	31,-4(11)
+-	blr
+-
+-/* Routines for restoring integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer restore area.  */
+-
+-_GLOBAL(_restgpr_14)
+-_GLOBAL(_rest32gpr_14)
+-	lwz	14,-72(11)	/* restore gp registers */
+-_GLOBAL(_restgpr_15)
+-_GLOBAL(_rest32gpr_15)
+-	lwz	15,-68(11)
+-_GLOBAL(_restgpr_16)
+-_GLOBAL(_rest32gpr_16)
+-	lwz	16,-64(11)
+-_GLOBAL(_restgpr_17)
+-_GLOBAL(_rest32gpr_17)
+-	lwz	17,-60(11)
+-_GLOBAL(_restgpr_18)
+-_GLOBAL(_rest32gpr_18)
+-	lwz	18,-56(11)
+-_GLOBAL(_restgpr_19)
+-_GLOBAL(_rest32gpr_19)
+-	lwz	19,-52(11)
+-_GLOBAL(_restgpr_20)
+-_GLOBAL(_rest32gpr_20)
+-	lwz	20,-48(11)
+-_GLOBAL(_restgpr_21)
+-_GLOBAL(_rest32gpr_21)
+-	lwz	21,-44(11)
+-_GLOBAL(_restgpr_22)
+-_GLOBAL(_rest32gpr_22)
+-	lwz	22,-40(11)
+-_GLOBAL(_restgpr_23)
+-_GLOBAL(_rest32gpr_23)
+-	lwz	23,-36(11)
+-_GLOBAL(_restgpr_24)
+-_GLOBAL(_rest32gpr_24)
+-	lwz	24,-32(11)
+-_GLOBAL(_restgpr_25)
+-_GLOBAL(_rest32gpr_25)
+-	lwz	25,-28(11)
+-_GLOBAL(_restgpr_26)
+-_GLOBAL(_rest32gpr_26)
+-	lwz	26,-24(11)
+-_GLOBAL(_restgpr_27)
+-_GLOBAL(_rest32gpr_27)
+-	lwz	27,-20(11)
+-_GLOBAL(_restgpr_28)
+-_GLOBAL(_rest32gpr_28)
+-	lwz	28,-16(11)
+-_GLOBAL(_restgpr_29)
+-_GLOBAL(_rest32gpr_29)
+-	lwz	29,-12(11)
+-_GLOBAL(_restgpr_30)
+-_GLOBAL(_rest32gpr_30)
+-	lwz	30,-8(11)
+-_GLOBAL(_restgpr_31)
+-_GLOBAL(_rest32gpr_31)
+-	lwz	31,-4(11)
+-	blr
+-
+-/* Routines for restoring integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer restore area.  */
+-
+-_GLOBAL(_restgpr_14_x)
+-_GLOBAL(_rest32gpr_14_x)
+-	lwz	14,-72(11)	/* restore gp registers */
+-_GLOBAL(_restgpr_15_x)
+-_GLOBAL(_rest32gpr_15_x)
+-	lwz	15,-68(11)
+-_GLOBAL(_restgpr_16_x)
+-_GLOBAL(_rest32gpr_16_x)
+-	lwz	16,-64(11)
+-_GLOBAL(_restgpr_17_x)
+-_GLOBAL(_rest32gpr_17_x)
+-	lwz	17,-60(11)
+-_GLOBAL(_restgpr_18_x)
+-_GLOBAL(_rest32gpr_18_x)
+-	lwz	18,-56(11)
+-_GLOBAL(_restgpr_19_x)
+-_GLOBAL(_rest32gpr_19_x)
+-	lwz	19,-52(11)
+-_GLOBAL(_restgpr_20_x)
+-_GLOBAL(_rest32gpr_20_x)
+-	lwz	20,-48(11)
+-_GLOBAL(_restgpr_21_x)
+-_GLOBAL(_rest32gpr_21_x)
+-	lwz	21,-44(11)
+-_GLOBAL(_restgpr_22_x)
+-_GLOBAL(_rest32gpr_22_x)
+-	lwz	22,-40(11)
+-_GLOBAL(_restgpr_23_x)
+-_GLOBAL(_rest32gpr_23_x)
+-	lwz	23,-36(11)
+-_GLOBAL(_restgpr_24_x)
+-_GLOBAL(_rest32gpr_24_x)
+-	lwz	24,-32(11)
+-_GLOBAL(_restgpr_25_x)
+-_GLOBAL(_rest32gpr_25_x)
+-	lwz	25,-28(11)
+-_GLOBAL(_restgpr_26_x)
+-_GLOBAL(_rest32gpr_26_x)
+-	lwz	26,-24(11)
+-_GLOBAL(_restgpr_27_x)
+-_GLOBAL(_rest32gpr_27_x)
+-	lwz	27,-20(11)
+-_GLOBAL(_restgpr_28_x)
+-_GLOBAL(_rest32gpr_28_x)
+-	lwz	28,-16(11)
+-_GLOBAL(_restgpr_29_x)
+-_GLOBAL(_rest32gpr_29_x)
+-	lwz	29,-12(11)
+-_GLOBAL(_restgpr_30_x)
+-_GLOBAL(_rest32gpr_30_x)
+-	lwz	30,-8(11)
+-_GLOBAL(_restgpr_31_x)
+-_GLOBAL(_rest32gpr_31_x)
+-	lwz	0,4(11)
+-	lwz	31,-4(11)
+-	mtlr	0
+-	mr	1,11
+-	blr
+-#endif
+--- a/arch/powerpc/lib/Makefile
++++ b/arch/powerpc/lib/Makefile
+@@ -13,7 +13,7 @@ CFLAGS_REMOVE_feature-fixups.o = -pg
+ 
+ obj-y			:= string.o alloc.o \
+ 			   checksum_$(CONFIG_WORD_SIZE).o
+-obj-$(CONFIG_PPC32)	+= div64.o copy_32.o crtsavres.o
++obj-$(CONFIG_PPC32)	+= div64.o copy_32.o
+ obj-$(CONFIG_HAS_IOMEM)	+= devres.o
+ 
+ obj-$(CONFIG_PPC64)	+= copypage_64.o copyuser_64.o \
+--- a/arch/powerpc/Makefile
++++ b/arch/powerpc/Makefile
+@@ -92,8 +92,6 @@ endif
+ else
+ 	KBUILD_CFLAGS += $(call cc-option,-mtune=power4)
+ endif
+-else
+-LDFLAGS_MODULE	+= arch/powerpc/lib/crtsavres.o
+ endif
+ 
+ ifeq ($(CONFIG_TUNE_CELL),y)
diff --git a/target/linux/generic/patches-2.6.31/970-ocf_kbuild_integration.patch b/target/linux/generic/patches-2.6.31/970-ocf_kbuild_integration.patch
new file mode 100644
index 0000000000..61897eb4a6
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/970-ocf_kbuild_integration.patch
@@ -0,0 +1,20 @@
+--- a/crypto/Kconfig
++++ b/crypto/Kconfig
+@@ -791,3 +791,6 @@ config CRYPTO_ANSI_CPRNG
+ source "drivers/crypto/Kconfig"
+ 
+ endif	# if CRYPTO
++
++source "crypto/ocf/Kconfig"
++
+--- a/crypto/Makefile
++++ b/crypto/Makefile
+@@ -84,6 +84,8 @@ obj-$(CONFIG_CRYPTO_RNG2) += krng.o
+ obj-$(CONFIG_CRYPTO_ANSI_CPRNG) += ansi_cprng.o
+ obj-$(CONFIG_CRYPTO_TEST) += tcrypt.o
+ 
++obj-$(CONFIG_OCF_OCF) += ocf/
++
+ #
+ # generic algorithms and the async_tx api
+ #
diff --git a/target/linux/generic/patches-2.6.31/971-ocf_20100325.patch b/target/linux/generic/patches-2.6.31/971-ocf_20100325.patch
new file mode 100644
index 0000000000..46dd71fe9e
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/971-ocf_20100325.patch
@@ -0,0 +1,170 @@
+--- a/drivers/char/random.c
++++ b/drivers/char/random.c
+@@ -129,6 +129,9 @@
+  *                                unsigned int value);
+  * 	void add_interrupt_randomness(int irq);
+  *
++ *      void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
++ *      int random_input_wait(void);
++ *
+  * add_input_randomness() uses the input layer interrupt timing, as well as
+  * the event type information from the hardware.
+  *
+@@ -140,6 +143,13 @@
+  * a better measure, since the timing of the disk interrupts are more
+  * unpredictable.
+  *
++ * random_input_words() just provides a raw block of entropy to the input
++ * pool, such as from a hardware entropy generator.
++ *
++ * random_input_wait() suspends the caller until such time as the
++ * entropy pool falls below the write threshold, and returns a count of how
++ * much entropy (in bits) is needed to sustain the pool.
++ *
+  * All of these routines try to estimate how many bits of randomness a
+  * particular randomness source.  They do this by keeping track of the
+  * first and second order deltas of the event timings.
+@@ -712,6 +722,61 @@ void add_disk_randomness(struct gendisk 
+ }
+ #endif
+ 
++/*
++ * random_input_words - add bulk entropy to pool
++ *
++ * @buf: buffer to add
++ * @wordcount: number of __u32 words to add
++ * @ent_count: total amount of entropy (in bits) to credit
++ *
++ * this provides bulk input of entropy to the input pool
++ *
++ */
++void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
++{
++	mix_pool_bytes(&input_pool, buf, wordcount*4);
++
++	credit_entropy_bits(&input_pool, ent_count);
++
++	DEBUG_ENT("crediting %d bits => %d\n",
++		  ent_count, input_pool.entropy_count);
++	/*
++	 * Wake up waiting processes if we have enough
++	 * entropy.
++	 */
++	if (input_pool.entropy_count >= random_read_wakeup_thresh)
++		wake_up_interruptible(&random_read_wait);
++}
++EXPORT_SYMBOL(random_input_words);
++
++/*
++ * random_input_wait - wait until random needs entropy
++ *
++ * this function sleeps until the /dev/random subsystem actually
++ * needs more entropy, and then return the amount of entropy
++ * that it would be nice to have added to the system.
++ */
++int random_input_wait(void)
++{
++	int count;
++
++	wait_event_interruptible(random_write_wait, 
++			 input_pool.entropy_count < random_write_wakeup_thresh);
++
++	count = random_write_wakeup_thresh - input_pool.entropy_count;
++
++        /* likely we got woken up due to a signal */
++	if (count <= 0) count = random_read_wakeup_thresh; 
++
++	DEBUG_ENT("requesting %d bits from input_wait()er %d<%d\n",
++		  count,
++		  input_pool.entropy_count, random_write_wakeup_thresh);
++
++	return count;
++}
++EXPORT_SYMBOL(random_input_wait);
++
++
+ #define EXTRACT_SIZE 10
+ 
+ /*********************************************************************
+--- a/fs/fcntl.c
++++ b/fs/fcntl.c
+@@ -141,6 +141,7 @@ SYSCALL_DEFINE1(dup, unsigned int, filde
+ 	}
+ 	return ret;
+ }
++EXPORT_SYMBOL(sys_dup);
+ 
+ #define SETFL_MASK (O_APPEND | O_NONBLOCK | O_NDELAY | O_DIRECT | O_NOATIME)
+ 
+--- a/include/linux/miscdevice.h
++++ b/include/linux/miscdevice.h
+@@ -12,6 +12,7 @@
+ #define APOLLO_MOUSE_MINOR	7
+ #define PC110PAD_MINOR		9
+ /*#define ADB_MOUSE_MINOR	10	FIXME OBSOLETE */
++#define CRYPTODEV_MINOR		70	/* /dev/crypto */
+ #define WATCHDOG_MINOR		130	/* Watchdog timer     */
+ #define TEMP_MINOR		131	/* Temperature Sensor */
+ #define RTC_MINOR		135
+--- a/include/linux/random.h
++++ b/include/linux/random.h
+@@ -9,6 +9,7 @@
+ 
+ #include <linux/types.h>
+ #include <linux/ioctl.h>
++#include <linux/types.h> /* for __u32 in user space */
+ #include <linux/irqnr.h>
+ 
+ /* ioctl()'s for the random number generator */
+@@ -34,6 +35,30 @@
+ /* Clear the entropy pool and associated counters.  (Superuser only.) */
+ #define RNDCLEARPOOL	_IO( 'R', 0x06 )
+ 
++#ifdef CONFIG_FIPS_RNG
++
++/* Size of seed value - equal to AES blocksize */
++#define AES_BLOCK_SIZE_BYTES	16
++#define SEED_SIZE_BYTES			AES_BLOCK_SIZE_BYTES
++/* Size of AES key */
++#define KEY_SIZE_BYTES		16
++
++/* ioctl() structure used by FIPS 140-2 Tests */
++struct rand_fips_test {
++	unsigned char key[KEY_SIZE_BYTES];			/* Input */
++	unsigned char datetime[SEED_SIZE_BYTES];	/* Input */
++	unsigned char seed[SEED_SIZE_BYTES];		/* Input */
++	unsigned char result[SEED_SIZE_BYTES];		/* Output */
++};
++
++/* FIPS 140-2 RNG Variable Seed Test. (Superuser only.) */
++#define RNDFIPSVST	_IOWR('R', 0x10, struct rand_fips_test)
++
++/* FIPS 140-2 RNG Monte Carlo Test. (Superuser only.) */
++#define RNDFIPSMCT	_IOWR('R', 0x11, struct rand_fips_test)
++
++#endif /* #ifdef CONFIG_FIPS_RNG */
++
+ struct rand_pool_info {
+ 	int	entropy_count;
+ 	int	buf_size;
+@@ -50,6 +75,10 @@ extern void add_input_randomness(unsigne
+ 				 unsigned int value);
+ extern void add_interrupt_randomness(int irq);
+ 
++extern void random_input_words(__u32 *buf, size_t wordcount, int ent_count);
++extern int random_input_wait(void);
++#define HAS_RANDOM_INPUT_WAIT 1
++
+ extern void get_random_bytes(void *buf, int nbytes);
+ void generate_random_uuid(unsigned char uuid_out[16]);
+ 
+--- a/kernel/pid.c
++++ b/kernel/pid.c
+@@ -387,6 +387,7 @@ struct task_struct *find_task_by_vpid(pi
+ {
+ 	return find_task_by_pid_ns(vnr, current->nsproxy->pid_ns);
+ }
++EXPORT_SYMBOL(find_task_by_vpid);
+ 
+ struct pid *get_task_pid(struct task_struct *task, enum pid_type type)
+ {
diff --git a/target/linux/generic/patches-2.6.31/974-ssb_b43_default_on.patch b/target/linux/generic/patches-2.6.31/974-ssb_b43_default_on.patch
new file mode 100644
index 0000000000..3176dcb4d8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/974-ssb_b43_default_on.patch
@@ -0,0 +1,19 @@
+--- a/drivers/ssb/Kconfig
++++ b/drivers/ssb/Kconfig
+@@ -29,6 +29,7 @@ config SSB_SPROM
+ config SSB_BLOCKIO
+ 	bool
+ 	depends on SSB
++	default y
+ 
+ config SSB_PCIHOST_POSSIBLE
+ 	bool
+@@ -49,7 +50,7 @@ config SSB_PCIHOST
+ config SSB_B43_PCI_BRIDGE
+ 	bool
+ 	depends on SSB_PCIHOST
+-	default n
++	default y
+ 
+ config SSB_PCMCIAHOST_POSSIBLE
+ 	bool
diff --git a/target/linux/generic/patches-2.6.31/975-hifn795x-byteswap.patch b/target/linux/generic/patches-2.6.31/975-hifn795x-byteswap.patch
new file mode 100644
index 0000000000..3a37c951ec
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/975-hifn795x-byteswap.patch
@@ -0,0 +1,17 @@
+--- a/drivers/crypto/hifn_795x.c
++++ b/drivers/crypto/hifn_795x.c
+@@ -682,12 +682,12 @@ static inline u32 hifn_read_1(struct hif
+ 
+ static inline void hifn_write_0(struct hifn_device *dev, u32 reg, u32 val)
+ {
+-	writel((__force u32)cpu_to_le32(val), dev->bar[0] + reg);
++	writel(val, dev->bar[0] + reg);
+ }
+ 
+ static inline void hifn_write_1(struct hifn_device *dev, u32 reg, u32 val)
+ {
+-	writel((__force u32)cpu_to_le32(val), dev->bar[1] + reg);
++	writel(val, dev->bar[1] + reg);
+ }
+ 
+ static void hifn_wait_puc(struct hifn_device *dev)
diff --git a/target/linux/generic/patches-2.6.31/977-textsearch_kconfig_hacks.patch b/target/linux/generic/patches-2.6.31/977-textsearch_kconfig_hacks.patch
new file mode 100644
index 0000000000..94d6b91d8a
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/977-textsearch_kconfig_hacks.patch
@@ -0,0 +1,23 @@
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -152,16 +152,16 @@ config REED_SOLOMON_DEC16
+ # Textsearch support is select'ed if needed
+ #
+ config TEXTSEARCH
+-	boolean
++	boolean	"Textsearch support"
+ 
+ config TEXTSEARCH_KMP
+-	tristate
++	tristate "Textsearch KMP"
+ 
+ config TEXTSEARCH_BM
+-	tristate
++	tristate "Textsearch BM"
+ 
+ config TEXTSEARCH_FSM
+-	tristate
++	tristate "Textsearch FSM"
+ 
+ config HAS_IOMEM
+ 	boolean
diff --git a/target/linux/generic/patches-2.6.31/978-lib80211_kconfig_hacks.patch b/target/linux/generic/patches-2.6.31/978-lib80211_kconfig_hacks.patch
new file mode 100644
index 0000000000..696ad55602
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/978-lib80211_kconfig_hacks.patch
@@ -0,0 +1,19 @@
+--- a/net/wireless/Kconfig
++++ b/net/wireless/Kconfig
+@@ -72,13 +72,13 @@ config LIB80211
+ 	  you want this built into your kernel.
+ 
+ config LIB80211_CRYPT_WEP
+-	tristate
++	tristate "LIB80211_CRYPT_WEP"
+ 
+ config LIB80211_CRYPT_CCMP
+-	tristate
++	tristate "LIB80211_CRYPT_CCMP"
+ 
+ config LIB80211_CRYPT_TKIP
+-	tristate
++	tristate "LIB80211_CRYPT_TKIP"
+ 
+ config LIB80211_DEBUG
+ 	bool "lib80211 debugging messages"
diff --git a/target/linux/generic/patches-2.6.31/979-crypto_add_kconfig_prompts.patch b/target/linux/generic/patches-2.6.31/979-crypto_add_kconfig_prompts.patch
new file mode 100644
index 0000000000..03ad2a8590
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/979-crypto_add_kconfig_prompts.patch
@@ -0,0 +1,47 @@
+--- a/crypto/Kconfig
++++ b/crypto/Kconfig
+@@ -30,7 +30,7 @@ config CRYPTO_FIPS
+ 	  this is.
+ 
+ config CRYPTO_ALGAPI
+-	tristate
++	tristate "ALGAPI"
+ 	select CRYPTO_ALGAPI2
+ 	help
+ 	  This option provides the API for cryptographic algorithms.
+@@ -39,7 +39,7 @@ config CRYPTO_ALGAPI2
+ 	tristate
+ 
+ config CRYPTO_AEAD
+-	tristate
++	tristate "AEAD"
+ 	select CRYPTO_AEAD2
+ 	select CRYPTO_ALGAPI
+ 
+@@ -48,7 +48,7 @@ config CRYPTO_AEAD2
+ 	select CRYPTO_ALGAPI2
+ 
+ config CRYPTO_BLKCIPHER
+-	tristate
++	tristate "BLKCIPHER"
+ 	select CRYPTO_BLKCIPHER2
+ 	select CRYPTO_ALGAPI
+ 
+@@ -59,7 +59,7 @@ config CRYPTO_BLKCIPHER2
+ 	select CRYPTO_WORKQUEUE
+ 
+ config CRYPTO_HASH
+-	tristate
++	tristate "HASH"
+ 	select CRYPTO_HASH2
+ 	select CRYPTO_ALGAPI
+ 
+@@ -68,7 +68,7 @@ config CRYPTO_HASH2
+ 	select CRYPTO_ALGAPI2
+ 
+ config CRYPTO_RNG
+-	tristate
++	tristate "RNG"
+ 	select CRYPTO_RNG2
+ 	select CRYPTO_ALGAPI
+ 
diff --git a/target/linux/generic/patches-2.6.31/980-vm_exports.patch b/target/linux/generic/patches-2.6.31/980-vm_exports.patch
new file mode 100644
index 0000000000..3f1848b9e2
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/980-vm_exports.patch
@@ -0,0 +1,135 @@
+--- a/mm/shmem.c
++++ b/mm/shmem.c
+@@ -2602,6 +2602,16 @@ int shmem_unuse(swp_entry_t entry, struc
+ 
+ /* common code */
+ 
++void shmem_set_file(struct vm_area_struct *vma, struct file *file)
++{
++	ima_counts_get(file);
++	if (vma->vm_file)
++		fput(vma->vm_file);
++	vma->vm_file = file;
++	vma->vm_ops = &shmem_vm_ops;
++}
++EXPORT_SYMBOL_GPL(shmem_set_file);
++
+ /**
+  * shmem_file_setup - get an unlinked file living in tmpfs
+  * @name: name for dentry (to be seen in /proc/<pid>/maps
+@@ -2681,10 +2691,7 @@ int shmem_zero_setup(struct vm_area_stru
+ 	if (IS_ERR(file))
+ 		return PTR_ERR(file);
+ 
+-	if (vma->vm_file)
+-		fput(vma->vm_file);
+-	vma->vm_file = file;
+-	vma->vm_ops = &shmem_vm_ops;
++	shmem_set_file(vma, file);
+ 	return 0;
+ }
+ 
+--- a/fs/file.c
++++ b/fs/file.c
+@@ -270,6 +270,7 @@ int expand_files(struct files_struct *fi
+ 	/* All good, so we try */
+ 	return expand_fdtable(files, nr);
+ }
++EXPORT_SYMBOL_GPL(expand_files);
+ 
+ static int count_open_files(struct fdtable *fdt)
+ {
+--- a/kernel/exit.c
++++ b/kernel/exit.c
+@@ -507,6 +507,7 @@ struct files_struct *get_files_struct(st
+ 
+ 	return files;
+ }
++EXPORT_SYMBOL_GPL(get_files_struct);
+ 
+ void put_files_struct(struct files_struct *files)
+ {
+@@ -526,6 +527,7 @@ void put_files_struct(struct files_struc
+ 		free_fdtable(fdt);
+ 	}
+ }
++EXPORT_SYMBOL_GPL(put_files_struct);
+ 
+ void reset_files_struct(struct files_struct *files)
+ {
+--- a/kernel/fork.c
++++ b/kernel/fork.c
+@@ -159,6 +159,7 @@ void __put_task_struct(struct task_struc
+ 	if (!profile_handoff_task(tsk))
+ 		free_task(tsk);
+ }
++EXPORT_SYMBOL_GPL(__put_task_struct);
+ 
+ /*
+  * macro override instead of weak attribute alias, to workaround
+--- a/kernel/sched.c
++++ b/kernel/sched.c
+@@ -5981,6 +5981,7 @@ int can_nice(const struct task_struct *p
+ 	return (nice_rlim <= p->signal->rlim[RLIMIT_NICE].rlim_cur ||
+ 		capable(CAP_SYS_NICE));
+ }
++EXPORT_SYMBOL_GPL(can_nice);
+ 
+ #ifdef __ARCH_WANT_SYS_NICE
+ 
+--- a/mm/memory.c
++++ b/mm/memory.c
+@@ -1064,6 +1064,7 @@ unsigned long zap_page_range(struct vm_a
+ 		tlb_finish_mmu(tlb, address, end);
+ 	return end;
+ }
++EXPORT_SYMBOL_GPL(zap_page_range);
+ 
+ /**
+  * zap_vma_ptes - remove ptes mapping the vma
+@@ -2490,6 +2491,7 @@ int vmtruncate_range(struct inode *inode
+ 
+ 	return 0;
+ }
++EXPORT_SYMBOL_GPL(vmtruncate_range);
+ 
+ /*
+  * We enter with non-exclusive mmap_sem (to exclude vma changes,
+--- a/mm/vmalloc.c
++++ b/mm/vmalloc.c
+@@ -1101,6 +1101,7 @@ void unmap_kernel_range(unsigned long ad
+ 	vunmap_page_range(addr, end);
+ 	flush_tlb_kernel_range(addr, end);
+ }
++EXPORT_SYMBOL_GPL(unmap_kernel_range);
+ 
+ int map_vm_area(struct vm_struct *area, pgprot_t prot, struct page ***pages)
+ {
+@@ -1214,6 +1215,7 @@ struct vm_struct *get_vm_area(unsigned l
+ 	return __get_vm_area_node(size, flags, VMALLOC_START, VMALLOC_END,
+ 				-1, GFP_KERNEL, __builtin_return_address(0));
+ }
++EXPORT_SYMBOL_GPL(get_vm_area);
+ 
+ struct vm_struct *get_vm_area_caller(unsigned long size, unsigned long flags,
+ 				void *caller)
+--- a/include/linux/mm.h
++++ b/include/linux/mm.h
+@@ -711,6 +711,7 @@ static inline int shmem_lock(struct file
+ #endif
+ struct file *shmem_file_setup(const char *name, loff_t size, unsigned long flags);
+ 
++void shmem_set_file(struct vm_area_struct *vma, struct file *file);
+ int shmem_zero_setup(struct vm_area_struct *);
+ 
+ #ifndef CONFIG_MMU
+--- a/kernel/signal.c
++++ b/kernel/signal.c
+@@ -1062,6 +1062,7 @@ struct sighand_struct *lock_task_sighand
+ 
+ 	return sighand;
+ }
++EXPORT_SYMBOL(lock_task_sighand);
+ 
+ /*
+  * send signal info to all the members of a group
diff --git a/target/linux/generic/patches-2.6.31/985-cris-headers.patch b/target/linux/generic/patches-2.6.31/985-cris-headers.patch
new file mode 100644
index 0000000000..73ede933ba
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/985-cris-headers.patch
@@ -0,0 +1,27 @@
+--- a/arch/cris/include/arch-v10/arch/Kbuild
++++ b/arch/cris/include/arch-v10/arch/Kbuild
+@@ -1,3 +1,5 @@
++header-y += elf.h
++header-y += ptrace.h
+ header-y += user.h
+ header-y += svinto.h
+ header-y += sv_addr_ag.h
+--- a/arch/cris/include/asm/Kbuild
++++ b/arch/cris/include/asm/Kbuild
+@@ -1,11 +1,14 @@
+ include include/asm-generic/Kbuild.asm
+ 
+-header-y += arch-v10/
+-header-y += arch-v32/
++header-y += ../arch-v10/arch/
++header-y += ../arch-v32/arch/
+ 
++header-y += elf.h
+ header-y += ethernet.h
++header-y += page.h
+ header-y += rtc.h
+ header-y += sync_serial.h
++header-y += user.h
+ 
+ unifdef-y += etraxgpio.h
+ unifdef-y += rs485.h
diff --git a/target/linux/generic/patches-2.6.31/991-ppc4xx_optimization.patch b/target/linux/generic/patches-2.6.31/991-ppc4xx_optimization.patch
new file mode 100644
index 0000000000..39d5fb0d00
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/991-ppc4xx_optimization.patch
@@ -0,0 +1,30 @@
+Upstream doesn't optimize the kernel and bootwrappers for ppc44x because
+they still want to support gcc 3.3 -- well, we don't.
+
+--- a/arch/powerpc/Makefile
++++ b/arch/powerpc/Makefile
+@@ -123,7 +123,8 @@ ifeq ($(CONFIG_FUNCTION_TRACER),y)
+ KBUILD_CFLAGS		+= -mno-sched-epilog
+ endif
+ 
+-cpu-as-$(CONFIG_4xx)		+= -Wa,-m405
++cpu-as-$(CONFIG_40x)		+= -Wa,-m405
++cpu-as-$(CONFIG_44x)		+= -Wa,-m440
+ cpu-as-$(CONFIG_6xx)		+= -Wa,-maltivec
+ cpu-as-$(CONFIG_POWER4)		+= -Wa,-maltivec
+ cpu-as-$(CONFIG_E500)		+= -Wa,-me500
+--- a/arch/powerpc/boot/Makefile
++++ b/arch/powerpc/boot/Makefile
+@@ -38,9 +38,9 @@ BOOTCFLAGS	+= -I$(obj) -I$(srctree)/$(ob
+ DTS_FLAGS	?= -p 1024
+ 
+ $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
+-$(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
+-$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
+-$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
++$(obj)/ebony.o: BOOTCFLAGS += -mcpu=440
++$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=440
++$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440
+ $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
+ $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
+ $(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
diff --git a/target/linux/generic/patches-2.6.31/998-openwrt_lzma_options.patch b/target/linux/generic/patches-2.6.31/998-openwrt_lzma_options.patch
new file mode 100644
index 0000000000..2a38c0bc79
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/998-openwrt_lzma_options.patch
@@ -0,0 +1,44 @@
+--- a/scripts/Makefile.lib
++++ b/scripts/Makefile.lib
+@@ -228,7 +228,7 @@ cmd_bzip2 = (cat $(filter-out FORCE,$^)
+ 
+ quiet_cmd_lzma = LZMA    $@
+ cmd_lzma = (cat $(filter-out FORCE,$^) | \
+-	lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
++	lzma e -lc1 -lp2 -pb2 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ 	(rm -f $@ ; false)
+ 
+ quiet_cmd_lzo = LZO    $@
+--- a/scripts/gen_initramfs_list.sh
++++ b/scripts/gen_initramfs_list.sh
+@@ -225,7 +225,7 @@ cpio_list=
+ output="/dev/stdout"
+ output_file=""
+ is_cpio_compressed=
+-compr="gzip -9 -f"
++compr="gzip -9 -f -"
+ 
+ arg="$1"
+ case "$arg" in
+@@ -239,9 +239,9 @@ case "$arg" in
+ 		output_file="$1"
+ 		cpio_list="$(mktemp ${TMPDIR:-/tmp}/cpiolist.XXXXXX)"
+ 		output=${cpio_list}
+-		echo "$output_file" | grep -q "\.gz$" && compr="gzip -9 -f"
+-		echo "$output_file" | grep -q "\.bz2$" && compr="bzip2 -9 -f"
+-		echo "$output_file" | grep -q "\.lzma$" && compr="lzma -9 -f"
++		echo "$output_file" | grep -q "\.gz$" && compr="gzip -9 -f -"
++		echo "$output_file" | grep -q "\.bz2$" && compr="bzip2 -9 -f -"
++		echo "$output_file" | grep -q "\.lzma$" && compr="lzma e -lc1 -lp2 -pb2 -eos -si -so"
+ 		echo "$output_file" | grep -q "\.cpio$" && compr="cat"
+ 		shift
+ 		;;
+@@ -292,7 +292,7 @@ if [ ! -z ${output_file} ]; then
+ 	if [ "${is_cpio_compressed}" = "compressed" ]; then
+ 		cat ${cpio_tfile} > ${output_file}
+ 	else
+-		(cat ${cpio_tfile} | ${compr}  - > ${output_file}) \
++		(cat ${cpio_tfile} | ${compr} > ${output_file}) \
+ 		|| (rm -f ${output_file} ; false)
+ 	fi
+ 	[ -z ${cpio_file} ] && rm ${cpio_tfile}
diff --git a/target/linux/generic/patches-2.6.31/999-use_preinit_as_init.patch b/target/linux/generic/patches-2.6.31/999-use_preinit_as_init.patch
new file mode 100644
index 0000000000..c85113ddd7
--- /dev/null
+++ b/target/linux/generic/patches-2.6.31/999-use_preinit_as_init.patch
@@ -0,0 +1,14 @@
+--- a/init/main.c
++++ b/init/main.c
+@@ -863,10 +863,7 @@ static noinline int init_post(void)
+ 		printk(KERN_WARNING "Failed to execute %s.  Attempting "
+ 					"defaults...\n", execute_command);
+ 	}
+-	run_init_process("/sbin/init");
+-	run_init_process("/etc/init");
+-	run_init_process("/bin/init");
+-	run_init_process("/bin/sh");
++	run_init_process("/etc/preinit");
+ 
+ 	panic("No init found.  Try passing init= option to kernel.");
+ }
diff --git a/target/linux/generic/patches-2.6.32/001-squashfs_move_zlib_decomp.patch b/target/linux/generic/patches-2.6.32/001-squashfs_move_zlib_decomp.patch
new file mode 100644
index 0000000000..94096791f1
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/001-squashfs_move_zlib_decomp.patch
@@ -0,0 +1,244 @@
+From 6c4419d997d4431bb62e73475cd6b084e83efbd1 Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Tue, 22 Sep 2009 19:25:24 +0100
+Subject: [PATCH] Squashfs: move zlib decompression wrapper code into a separate file
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/Makefile       |    2 +-
+ fs/squashfs/block.c        |   74 ++----------------------------
+ fs/squashfs/squashfs.h     |    4 ++
+ fs/squashfs/zlib_wrapper.c |  109 ++++++++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 118 insertions(+), 71 deletions(-)
+ create mode 100644 fs/squashfs/zlib_wrapper.c
+
+--- a/fs/squashfs/Makefile
++++ b/fs/squashfs/Makefile
+@@ -4,4 +4,4 @@
+ 
+ obj-$(CONFIG_SQUASHFS) += squashfs.o
+ squashfs-y += block.o cache.o dir.o export.o file.o fragment.o id.o inode.o
+-squashfs-y += namei.o super.o symlink.o
++squashfs-y += namei.o super.o symlink.o zlib_wrapper.o
+--- a/fs/squashfs/block.c
++++ b/fs/squashfs/block.c
+@@ -29,7 +29,6 @@
+ #include <linux/fs.h>
+ #include <linux/vfs.h>
+ #include <linux/slab.h>
+-#include <linux/mutex.h>
+ #include <linux/string.h>
+ #include <linux/buffer_head.h>
+ #include <linux/zlib.h>
+@@ -153,72 +152,10 @@ int squashfs_read_data(struct super_bloc
+ 	}
+ 
+ 	if (compressed) {
+-		int zlib_err = 0, zlib_init = 0;
+-
+-		/*
+-		 * Uncompress block.
+-		 */
+-
+-		mutex_lock(&msblk->read_data_mutex);
+-
+-		msblk->stream.avail_out = 0;
+-		msblk->stream.avail_in = 0;
+-
+-		bytes = length;
+-		do {
+-			if (msblk->stream.avail_in == 0 && k < b) {
+-				avail = min(bytes, msblk->devblksize - offset);
+-				bytes -= avail;
+-				wait_on_buffer(bh[k]);
+-				if (!buffer_uptodate(bh[k]))
+-					goto release_mutex;
+-
+-				if (avail == 0) {
+-					offset = 0;
+-					put_bh(bh[k++]);
+-					continue;
+-				}
+-
+-				msblk->stream.next_in = bh[k]->b_data + offset;
+-				msblk->stream.avail_in = avail;
+-				offset = 0;
+-			}
+-
+-			if (msblk->stream.avail_out == 0 && page < pages) {
+-				msblk->stream.next_out = buffer[page++];
+-				msblk->stream.avail_out = PAGE_CACHE_SIZE;
+-			}
+-
+-			if (!zlib_init) {
+-				zlib_err = zlib_inflateInit(&msblk->stream);
+-				if (zlib_err != Z_OK) {
+-					ERROR("zlib_inflateInit returned"
+-						" unexpected result 0x%x,"
+-						" srclength %d\n", zlib_err,
+-						srclength);
+-					goto release_mutex;
+-				}
+-				zlib_init = 1;
+-			}
+-
+-			zlib_err = zlib_inflate(&msblk->stream, Z_SYNC_FLUSH);
+-
+-			if (msblk->stream.avail_in == 0 && k < b)
+-				put_bh(bh[k++]);
+-		} while (zlib_err == Z_OK);
+-
+-		if (zlib_err != Z_STREAM_END) {
+-			ERROR("zlib_inflate error, data probably corrupt\n");
+-			goto release_mutex;
+-		}
+-
+-		zlib_err = zlib_inflateEnd(&msblk->stream);
+-		if (zlib_err != Z_OK) {
+-			ERROR("zlib_inflate error, data probably corrupt\n");
+-			goto release_mutex;
+-		}
+-		length = msblk->stream.total_out;
+-		mutex_unlock(&msblk->read_data_mutex);
++		length = zlib_uncompress(msblk, buffer, bh, b, offset, length,
++			srclength, pages);
++		if (length < 0)
++			goto read_failure;
+ 	} else {
+ 		/*
+ 		 * Block is uncompressed.
+@@ -255,9 +192,6 @@ int squashfs_read_data(struct super_bloc
+ 	kfree(bh);
+ 	return length;
+ 
+-release_mutex:
+-	mutex_unlock(&msblk->read_data_mutex);
+-
+ block_release:
+ 	for (; k < b; k++)
+ 		put_bh(bh[k]);
+--- a/fs/squashfs/squashfs.h
++++ b/fs/squashfs/squashfs.h
+@@ -70,6 +70,10 @@ extern struct inode *squashfs_iget(struc
+ 				unsigned int);
+ extern int squashfs_read_inode(struct inode *, long long);
+ 
++/* zlib_wrapper.c */
++extern int zlib_uncompress(struct squashfs_sb_info *, void **,
++				struct buffer_head **, int, int, int, int, int);
++
+ /*
+  * Inodes and files operations
+  */
+--- /dev/null
++++ b/fs/squashfs/zlib_wrapper.c
+@@ -0,0 +1,109 @@
++/*
++ * Squashfs - a compressed read only filesystem for Linux
++ *
++ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
++ * Phillip Lougher <phillip@lougher.demon.co.uk>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2,
++ * or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++ *
++ * zlib_wrapper.c
++ */
++
++
++#include <linux/mutex.h>
++#include <linux/buffer_head.h>
++#include <linux/zlib.h>
++
++#include "squashfs_fs.h"
++#include "squashfs_fs_sb.h"
++#include "squashfs_fs_i.h"
++#include "squashfs.h"
++
++int zlib_uncompress(struct squashfs_sb_info *msblk, void **buffer,
++	struct buffer_head **bh, int b, int offset, int length, int srclength,
++	int pages)
++{
++	int zlib_err = 0, zlib_init = 0;
++	int avail, bytes, k = 0, page = 0;
++
++	mutex_lock(&msblk->read_data_mutex);
++
++	msblk->stream.avail_out = 0;
++	msblk->stream.avail_in = 0;
++
++	bytes = length;
++	do {
++		if (msblk->stream.avail_in == 0 && k < b) {
++			avail = min(bytes, msblk->devblksize - offset);
++			bytes -= avail;
++			wait_on_buffer(bh[k]);
++			if (!buffer_uptodate(bh[k]))
++				goto release_mutex;
++
++			if (avail == 0) {
++				offset = 0;
++				put_bh(bh[k++]);
++				continue;
++			}
++
++			msblk->stream.next_in = bh[k]->b_data + offset;
++			msblk->stream.avail_in = avail;
++			offset = 0;
++		}
++
++		if (msblk->stream.avail_out == 0 && page < pages) {
++			msblk->stream.next_out = buffer[page++];
++			msblk->stream.avail_out = PAGE_CACHE_SIZE;
++		}
++
++		if (!zlib_init) {
++			zlib_err = zlib_inflateInit(&msblk->stream);
++			if (zlib_err != Z_OK) {
++				ERROR("zlib_inflateInit returned unexpected "
++					"result 0x%x, srclength %d\n",
++					zlib_err, srclength);
++				goto release_mutex;
++			}
++			zlib_init = 1;
++		}
++
++		zlib_err = zlib_inflate(&msblk->stream, Z_SYNC_FLUSH);
++
++		if (msblk->stream.avail_in == 0 && k < b)
++			put_bh(bh[k++]);
++	} while (zlib_err == Z_OK);
++
++	if (zlib_err != Z_STREAM_END) {
++		ERROR("zlib_inflate error, data probably corrupt\n");
++		goto release_mutex;
++	}
++
++	zlib_err = zlib_inflateEnd(&msblk->stream);
++	if (zlib_err != Z_OK) {
++		ERROR("zlib_inflate error, data probably corrupt\n");
++		goto release_mutex;
++	}
++
++	mutex_unlock(&msblk->read_data_mutex);
++	return msblk->stream.total_out;
++
++release_mutex:
++	mutex_unlock(&msblk->read_data_mutex);
++
++	for (; k < b; k++)
++		put_bh(bh[k]);
++
++	return -EIO;
++}
diff --git a/target/linux/generic/patches-2.6.32/002-squashfs_factor_out_remaining_zlib.patch b/target/linux/generic/patches-2.6.32/002-squashfs_factor_out_remaining_zlib.patch
new file mode 100644
index 0000000000..eacbb97aef
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/002-squashfs_factor_out_remaining_zlib.patch
@@ -0,0 +1,317 @@
+From 37c44e85fd49676ec15ccaeea065662c1fbcda7d Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Wed, 23 Sep 2009 19:04:49 +0100
+Subject: [PATCH] Squashfs: Factor out remaining zlib dependencies into separate wrapper file
+
+Move zlib buffer init/destroy code into separate wrapper file.  Also
+make zlib z_stream field a void * removing the need to include zlib.h
+for most files.
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/block.c          |    1 -
+ fs/squashfs/cache.c          |    1 -
+ fs/squashfs/dir.c            |    1 -
+ fs/squashfs/export.c         |    1 -
+ fs/squashfs/file.c           |    1 -
+ fs/squashfs/fragment.c       |    1 -
+ fs/squashfs/id.c             |    1 -
+ fs/squashfs/inode.c          |    1 -
+ fs/squashfs/namei.c          |    1 -
+ fs/squashfs/squashfs.h       |    2 +
+ fs/squashfs/squashfs_fs_sb.h |    2 +-
+ fs/squashfs/super.c          |   14 +++------
+ fs/squashfs/symlink.c        |    1 -
+ fs/squashfs/zlib_wrapper.c   |   56 ++++++++++++++++++++++++++++++++---------
+ 14 files changed, 51 insertions(+), 33 deletions(-)
+
+--- a/fs/squashfs/block.c
++++ b/fs/squashfs/block.c
+@@ -31,7 +31,6 @@
+ #include <linux/slab.h>
+ #include <linux/string.h>
+ #include <linux/buffer_head.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/cache.c
++++ b/fs/squashfs/cache.c
+@@ -51,7 +51,6 @@
+ #include <linux/sched.h>
+ #include <linux/spinlock.h>
+ #include <linux/wait.h>
+-#include <linux/zlib.h>
+ #include <linux/pagemap.h>
+ 
+ #include "squashfs_fs.h"
+--- a/fs/squashfs/dir.c
++++ b/fs/squashfs/dir.c
+@@ -30,7 +30,6 @@
+ #include <linux/fs.h>
+ #include <linux/vfs.h>
+ #include <linux/slab.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/export.c
++++ b/fs/squashfs/export.c
+@@ -39,7 +39,6 @@
+ #include <linux/vfs.h>
+ #include <linux/dcache.h>
+ #include <linux/exportfs.h>
+-#include <linux/zlib.h>
+ #include <linux/slab.h>
+ 
+ #include "squashfs_fs.h"
+--- a/fs/squashfs/file.c
++++ b/fs/squashfs/file.c
+@@ -47,7 +47,6 @@
+ #include <linux/string.h>
+ #include <linux/pagemap.h>
+ #include <linux/mutex.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/fragment.c
++++ b/fs/squashfs/fragment.c
+@@ -36,7 +36,6 @@
+ #include <linux/fs.h>
+ #include <linux/vfs.h>
+ #include <linux/slab.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/id.c
++++ b/fs/squashfs/id.c
+@@ -34,7 +34,6 @@
+ #include <linux/fs.h>
+ #include <linux/vfs.h>
+ #include <linux/slab.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/inode.c
++++ b/fs/squashfs/inode.c
+@@ -40,7 +40,6 @@
+ 
+ #include <linux/fs.h>
+ #include <linux/vfs.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/namei.c
++++ b/fs/squashfs/namei.c
+@@ -57,7 +57,6 @@
+ #include <linux/slab.h>
+ #include <linux/string.h>
+ #include <linux/dcache.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/squashfs.h
++++ b/fs/squashfs/squashfs.h
+@@ -71,6 +71,8 @@ extern struct inode *squashfs_iget(struc
+ extern int squashfs_read_inode(struct inode *, long long);
+ 
+ /* zlib_wrapper.c */
++extern void *zlib_init(void);
++extern void zlib_free(void *);
+ extern int zlib_uncompress(struct squashfs_sb_info *, void **,
+ 				struct buffer_head **, int, int, int, int, int);
+ 
+--- a/fs/squashfs/squashfs_fs_sb.h
++++ b/fs/squashfs/squashfs_fs_sb.h
+@@ -64,7 +64,7 @@ struct squashfs_sb_info {
+ 	struct mutex		read_data_mutex;
+ 	struct mutex		meta_index_mutex;
+ 	struct meta_index	*meta_index;
+-	z_stream		stream;
++	void			*stream;
+ 	__le64			*inode_lookup_table;
+ 	u64			inode_table;
+ 	u64			directory_table;
+--- a/fs/squashfs/super.c
++++ b/fs/squashfs/super.c
+@@ -35,7 +35,6 @@
+ #include <linux/pagemap.h>
+ #include <linux/init.h>
+ #include <linux/module.h>
+-#include <linux/zlib.h>
+ #include <linux/magic.h>
+ 
+ #include "squashfs_fs.h"
+@@ -87,12 +86,9 @@ static int squashfs_fill_super(struct su
+ 	}
+ 	msblk = sb->s_fs_info;
+ 
+-	msblk->stream.workspace = kmalloc(zlib_inflate_workspacesize(),
+-		GFP_KERNEL);
+-	if (msblk->stream.workspace == NULL) {
+-		ERROR("Failed to allocate zlib workspace\n");
++	msblk->stream = zlib_init();
++	if (msblk->stream == NULL)
+ 		goto failure;
+-	}
+ 
+ 	sblk = kzalloc(sizeof(*sblk), GFP_KERNEL);
+ 	if (sblk == NULL) {
+@@ -292,17 +288,17 @@ failed_mount:
+ 	squashfs_cache_delete(msblk->block_cache);
+ 	squashfs_cache_delete(msblk->fragment_cache);
+ 	squashfs_cache_delete(msblk->read_page);
++	zlib_free(msblk->stream);
+ 	kfree(msblk->inode_lookup_table);
+ 	kfree(msblk->fragment_index);
+ 	kfree(msblk->id_table);
+-	kfree(msblk->stream.workspace);
+ 	kfree(sb->s_fs_info);
+ 	sb->s_fs_info = NULL;
+ 	kfree(sblk);
+ 	return err;
+ 
+ failure:
+-	kfree(msblk->stream.workspace);
++	zlib_free(msblk->stream);
+ 	kfree(sb->s_fs_info);
+ 	sb->s_fs_info = NULL;
+ 	return -ENOMEM;
+@@ -346,10 +342,10 @@ static void squashfs_put_super(struct su
+ 		squashfs_cache_delete(sbi->block_cache);
+ 		squashfs_cache_delete(sbi->fragment_cache);
+ 		squashfs_cache_delete(sbi->read_page);
++		zlib_free(sbi->stream);
+ 		kfree(sbi->id_table);
+ 		kfree(sbi->fragment_index);
+ 		kfree(sbi->meta_index);
+-		kfree(sbi->stream.workspace);
+ 		kfree(sb->s_fs_info);
+ 		sb->s_fs_info = NULL;
+ 	}
+--- a/fs/squashfs/symlink.c
++++ b/fs/squashfs/symlink.c
+@@ -36,7 +36,6 @@
+ #include <linux/slab.h>
+ #include <linux/string.h>
+ #include <linux/pagemap.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/zlib_wrapper.c
++++ b/fs/squashfs/zlib_wrapper.c
+@@ -31,21 +31,51 @@
+ #include "squashfs_fs_i.h"
+ #include "squashfs.h"
+ 
++void *zlib_init()
++{
++	z_stream *stream = kmalloc(sizeof(z_stream), GFP_KERNEL);
++	if (stream == NULL)
++		goto failed;
++	stream->workspace = kmalloc(zlib_inflate_workspacesize(),
++		GFP_KERNEL);
++	if (stream->workspace == NULL)
++		goto failed;
++
++	return stream;
++
++failed:
++	ERROR("Failed to allocate zlib workspace\n");
++	kfree(stream);
++	return NULL;
++}
++
++
++void zlib_free(void *strm)
++{
++	z_stream *stream = strm;
++
++	if (stream)
++		kfree(stream->workspace);
++	kfree(stream);
++}
++
++
+ int zlib_uncompress(struct squashfs_sb_info *msblk, void **buffer,
+ 	struct buffer_head **bh, int b, int offset, int length, int srclength,
+ 	int pages)
+ {
+ 	int zlib_err = 0, zlib_init = 0;
+ 	int avail, bytes, k = 0, page = 0;
++	z_stream *stream = msblk->stream;
+ 
+ 	mutex_lock(&msblk->read_data_mutex);
+ 
+-	msblk->stream.avail_out = 0;
+-	msblk->stream.avail_in = 0;
++	stream->avail_out = 0;
++	stream->avail_in = 0;
+ 
+ 	bytes = length;
+ 	do {
+-		if (msblk->stream.avail_in == 0 && k < b) {
++		if (stream->avail_in == 0 && k < b) {
+ 			avail = min(bytes, msblk->devblksize - offset);
+ 			bytes -= avail;
+ 			wait_on_buffer(bh[k]);
+@@ -58,18 +88,18 @@ int zlib_uncompress(struct squashfs_sb_i
+ 				continue;
+ 			}
+ 
+-			msblk->stream.next_in = bh[k]->b_data + offset;
+-			msblk->stream.avail_in = avail;
++			stream->next_in = bh[k]->b_data + offset;
++			stream->avail_in = avail;
+ 			offset = 0;
+ 		}
+ 
+-		if (msblk->stream.avail_out == 0 && page < pages) {
+-			msblk->stream.next_out = buffer[page++];
+-			msblk->stream.avail_out = PAGE_CACHE_SIZE;
++		if (stream->avail_out == 0 && page < pages) {
++			stream->next_out = buffer[page++];
++			stream->avail_out = PAGE_CACHE_SIZE;
+ 		}
+ 
+ 		if (!zlib_init) {
+-			zlib_err = zlib_inflateInit(&msblk->stream);
++			zlib_err = zlib_inflateInit(stream);
+ 			if (zlib_err != Z_OK) {
+ 				ERROR("zlib_inflateInit returned unexpected "
+ 					"result 0x%x, srclength %d\n",
+@@ -79,9 +109,9 @@ int zlib_uncompress(struct squashfs_sb_i
+ 			zlib_init = 1;
+ 		}
+ 
+-		zlib_err = zlib_inflate(&msblk->stream, Z_SYNC_FLUSH);
++		zlib_err = zlib_inflate(stream, Z_SYNC_FLUSH);
+ 
+-		if (msblk->stream.avail_in == 0 && k < b)
++		if (stream->avail_in == 0 && k < b)
+ 			put_bh(bh[k++]);
+ 	} while (zlib_err == Z_OK);
+ 
+@@ -90,14 +120,14 @@ int zlib_uncompress(struct squashfs_sb_i
+ 		goto release_mutex;
+ 	}
+ 
+-	zlib_err = zlib_inflateEnd(&msblk->stream);
++	zlib_err = zlib_inflateEnd(stream);
+ 	if (zlib_err != Z_OK) {
+ 		ERROR("zlib_inflate error, data probably corrupt\n");
+ 		goto release_mutex;
+ 	}
+ 
+ 	mutex_unlock(&msblk->read_data_mutex);
+-	return msblk->stream.total_out;
++	return stream->total_out;
+ 
+ release_mutex:
+ 	mutex_unlock(&msblk->read_data_mutex);
diff --git a/target/linux/generic/patches-2.6.32/003-squashfs_add_decompressor_framework.patch b/target/linux/generic/patches-2.6.32/003-squashfs_add_decompressor_framework.patch
new file mode 100644
index 0000000000..fdf0d407a1
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/003-squashfs_add_decompressor_framework.patch
@@ -0,0 +1,426 @@
+From 327fbf47a419befc6bff74f3ca42d2b6f0841903 Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Tue, 6 Oct 2009 04:04:15 +0100
+Subject: [PATCH] Squashfs: add a decompressor framework
+
+This adds a decompressor framework which allows multiple compression
+algorithms to be cleanly supported.
+
+Also update zlib wrapper and other code to use the new framework.
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/Makefile         |    2 +-
+ fs/squashfs/block.c          |    6 ++--
+ fs/squashfs/decompressor.c   |   58 ++++++++++++++++++++++++++++++++++++++++++
+ fs/squashfs/decompressor.h   |   55 +++++++++++++++++++++++++++++++++++++++
+ fs/squashfs/squashfs.h       |   14 +++++-----
+ fs/squashfs/squashfs_fs_sb.h |   41 +++++++++++++++--------------
+ fs/squashfs/super.c          |   45 ++++++++++++++++++-------------
+ fs/squashfs/zlib_wrapper.c   |   17 ++++++++++--
+ 8 files changed, 185 insertions(+), 53 deletions(-)
+ create mode 100644 fs/squashfs/decompressor.c
+ create mode 100644 fs/squashfs/decompressor.h
+
+--- a/fs/squashfs/Makefile
++++ b/fs/squashfs/Makefile
+@@ -4,4 +4,4 @@
+ 
+ obj-$(CONFIG_SQUASHFS) += squashfs.o
+ squashfs-y += block.o cache.o dir.o export.o file.o fragment.o id.o inode.o
+-squashfs-y += namei.o super.o symlink.o zlib_wrapper.o
++squashfs-y += namei.o super.o symlink.o zlib_wrapper.o decompressor.o
+--- a/fs/squashfs/block.c
++++ b/fs/squashfs/block.c
+@@ -36,7 +36,7 @@
+ #include "squashfs_fs_sb.h"
+ #include "squashfs_fs_i.h"
+ #include "squashfs.h"
+-
++#include "decompressor.h"
+ /*
+  * Read the metadata block length, this is stored in the first two
+  * bytes of the metadata block.
+@@ -151,8 +151,8 @@ int squashfs_read_data(struct super_bloc
+ 	}
+ 
+ 	if (compressed) {
+-		length = zlib_uncompress(msblk, buffer, bh, b, offset, length,
+-			srclength, pages);
++		length = squashfs_decompress(msblk, buffer, bh, b, offset,
++			length, srclength, pages);
+ 		if (length < 0)
+ 			goto read_failure;
+ 	} else {
+--- /dev/null
++++ b/fs/squashfs/decompressor.c
+@@ -0,0 +1,58 @@
++/*
++ * Squashfs - a compressed read only filesystem for Linux
++ *
++ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
++ * Phillip Lougher <phillip@lougher.demon.co.uk>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2,
++ * or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++ *
++ * decompressor.c
++ */
++
++#include <linux/types.h>
++#include <linux/mutex.h>
++#include <linux/buffer_head.h>
++
++#include "squashfs_fs.h"
++#include "squashfs_fs_sb.h"
++#include "squashfs_fs_i.h"
++#include "decompressor.h"
++#include "squashfs.h"
++
++/*
++ * This file (and decompressor.h) implements a decompressor framework for
++ * Squashfs, allowing multiple decompressors to be easily supported
++ */
++
++static const struct squashfs_decompressor squashfs_unknown_comp_ops = {
++	NULL, NULL, NULL, 0, "unknown", 0
++};
++
++static const struct squashfs_decompressor *decompressor[] = {
++	&squashfs_zlib_comp_ops,
++	&squashfs_unknown_comp_ops
++};
++
++
++const struct squashfs_decompressor *squashfs_lookup_decompressor(int id)
++{
++	int i;
++
++	for (i = 0; decompressor[i]->id; i++)
++		if (id == decompressor[i]->id)
++			break;
++
++	return decompressor[i];
++}
+--- /dev/null
++++ b/fs/squashfs/decompressor.h
+@@ -0,0 +1,55 @@
++#ifndef DECOMPRESSOR_H
++#define DECOMPRESSOR_H
++/*
++ * Squashfs - a compressed read only filesystem for Linux
++ *
++ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
++ * Phillip Lougher <phillip@lougher.demon.co.uk>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2,
++ * or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++ *
++ * decompressor.h
++ */
++
++struct squashfs_decompressor {
++	void	*(*init)(void);
++	void	(*free)(void *);
++	int	(*decompress)(struct squashfs_sb_info *, void **,
++		struct buffer_head **, int, int, int, int, int);
++	int	id;
++	char	*name;
++	int	supported;
++};
++
++static inline void *squashfs_decompressor_init(struct squashfs_sb_info *msblk)
++{
++	return msblk->decompressor->init();
++}
++
++static inline void squashfs_decompressor_free(struct squashfs_sb_info *msblk,
++	void *s)
++{
++	if (msblk->decompressor)
++		msblk->decompressor->free(s);
++}
++
++static inline int squashfs_decompress(struct squashfs_sb_info *msblk,
++	void **buffer, struct buffer_head **bh, int b, int offset, int length,
++	int srclength, int pages)
++{
++	return msblk->decompressor->decompress(msblk, buffer, bh, b, offset,
++		length, srclength, pages);
++}
++#endif
+--- a/fs/squashfs/squashfs.h
++++ b/fs/squashfs/squashfs.h
+@@ -51,6 +51,9 @@ extern struct squashfs_cache_entry *squa
+ 				u64, int);
+ extern int squashfs_read_table(struct super_block *, void *, u64, int);
+ 
++/* decompressor.c */
++extern const struct squashfs_decompressor *squashfs_lookup_decompressor(int);
++
+ /* export.c */
+ extern __le64 *squashfs_read_inode_lookup_table(struct super_block *, u64,
+ 				unsigned int);
+@@ -70,14 +73,8 @@ extern struct inode *squashfs_iget(struc
+ 				unsigned int);
+ extern int squashfs_read_inode(struct inode *, long long);
+ 
+-/* zlib_wrapper.c */
+-extern void *zlib_init(void);
+-extern void zlib_free(void *);
+-extern int zlib_uncompress(struct squashfs_sb_info *, void **,
+-				struct buffer_head **, int, int, int, int, int);
+-
+ /*
+- * Inodes and files operations
++ * Inodes, files and decompressor operations
+  */
+ 
+ /* dir.c */
+@@ -94,3 +91,6 @@ extern const struct inode_operations squ
+ 
+ /* symlink.c */
+ extern const struct address_space_operations squashfs_symlink_aops;
++
++/* zlib_wrapper.c */
++extern const struct squashfs_decompressor squashfs_zlib_comp_ops;
+--- a/fs/squashfs/squashfs_fs_sb.h
++++ b/fs/squashfs/squashfs_fs_sb.h
+@@ -52,25 +52,26 @@ struct squashfs_cache_entry {
+ };
+ 
+ struct squashfs_sb_info {
+-	int			devblksize;
+-	int			devblksize_log2;
+-	struct squashfs_cache	*block_cache;
+-	struct squashfs_cache	*fragment_cache;
+-	struct squashfs_cache	*read_page;
+-	int			next_meta_index;
+-	__le64			*id_table;
+-	__le64			*fragment_index;
+-	unsigned int		*fragment_index_2;
+-	struct mutex		read_data_mutex;
+-	struct mutex		meta_index_mutex;
+-	struct meta_index	*meta_index;
+-	void			*stream;
+-	__le64			*inode_lookup_table;
+-	u64			inode_table;
+-	u64			directory_table;
+-	unsigned int		block_size;
+-	unsigned short		block_log;
+-	long long		bytes_used;
+-	unsigned int		inodes;
++	const struct squashfs_decompressor	*decompressor;
++	int					devblksize;
++	int					devblksize_log2;
++	struct squashfs_cache			*block_cache;
++	struct squashfs_cache			*fragment_cache;
++	struct squashfs_cache			*read_page;
++	int					next_meta_index;
++	__le64					*id_table;
++	__le64					*fragment_index;
++	unsigned int				*fragment_index_2;
++	struct mutex				read_data_mutex;
++	struct mutex				meta_index_mutex;
++	struct meta_index			*meta_index;
++	void					*stream;
++	__le64					*inode_lookup_table;
++	u64					inode_table;
++	u64					directory_table;
++	unsigned int				block_size;
++	unsigned short				block_log;
++	long long				bytes_used;
++	unsigned int				inodes;
+ };
+ #endif
+--- a/fs/squashfs/super.c
++++ b/fs/squashfs/super.c
+@@ -41,27 +41,35 @@
+ #include "squashfs_fs_sb.h"
+ #include "squashfs_fs_i.h"
+ #include "squashfs.h"
++#include "decompressor.h"
+ 
+ static struct file_system_type squashfs_fs_type;
+ static const struct super_operations squashfs_super_ops;
+ 
+-static int supported_squashfs_filesystem(short major, short minor, short comp)
++static const struct squashfs_decompressor *supported_squashfs_filesystem(short
++	major, short minor, short id)
+ {
++	const struct squashfs_decompressor *decompressor;
++
+ 	if (major < SQUASHFS_MAJOR) {
+ 		ERROR("Major/Minor mismatch, older Squashfs %d.%d "
+ 			"filesystems are unsupported\n", major, minor);
+-		return -EINVAL;
++		return NULL;
+ 	} else if (major > SQUASHFS_MAJOR || minor > SQUASHFS_MINOR) {
+ 		ERROR("Major/Minor mismatch, trying to mount newer "
+ 			"%d.%d filesystem\n", major, minor);
+ 		ERROR("Please update your kernel\n");
+-		return -EINVAL;
++		return NULL;
+ 	}
+ 
+-	if (comp != ZLIB_COMPRESSION)
+-		return -EINVAL;
++	decompressor = squashfs_lookup_decompressor(id);
++	if (!decompressor->supported) {
++		ERROR("Filesystem uses \"%s\" compression. This is not "
++			"supported\n", decompressor->name);
++		return NULL;
++	}
+ 
+-	return 0;
++	return decompressor;
+ }
+ 
+ 
+@@ -86,10 +94,6 @@ static int squashfs_fill_super(struct su
+ 	}
+ 	msblk = sb->s_fs_info;
+ 
+-	msblk->stream = zlib_init();
+-	if (msblk->stream == NULL)
+-		goto failure;
+-
+ 	sblk = kzalloc(sizeof(*sblk), GFP_KERNEL);
+ 	if (sblk == NULL) {
+ 		ERROR("Failed to allocate squashfs_super_block\n");
+@@ -116,25 +120,25 @@ static int squashfs_fill_super(struct su
+ 		goto failed_mount;
+ 	}
+ 
++	err = -EINVAL;
++
+ 	/* Check it is a SQUASHFS superblock */
+ 	sb->s_magic = le32_to_cpu(sblk->s_magic);
+ 	if (sb->s_magic != SQUASHFS_MAGIC) {
+ 		if (!silent)
+ 			ERROR("Can't find a SQUASHFS superblock on %s\n",
+ 						bdevname(sb->s_bdev, b));
+-		err = -EINVAL;
+ 		goto failed_mount;
+ 	}
+ 
+-	/* Check the MAJOR & MINOR versions and compression type */
+-	err = supported_squashfs_filesystem(le16_to_cpu(sblk->s_major),
++	/* Check the MAJOR & MINOR versions and lookup compression type */
++	msblk->decompressor = supported_squashfs_filesystem(
++			le16_to_cpu(sblk->s_major),
+ 			le16_to_cpu(sblk->s_minor),
+ 			le16_to_cpu(sblk->compression));
+-	if (err < 0)
++	if (msblk->decompressor == NULL)
+ 		goto failed_mount;
+ 
+-	err = -EINVAL;
+-
+ 	/*
+ 	 * Check if there's xattrs in the filesystem.  These are not
+ 	 * supported in this version, so warn that they will be ignored.
+@@ -201,6 +205,10 @@ static int squashfs_fill_super(struct su
+ 
+ 	err = -ENOMEM;
+ 
++	msblk->stream = squashfs_decompressor_init(msblk);
++	if (msblk->stream == NULL)
++		goto failed_mount;
++
+ 	msblk->block_cache = squashfs_cache_init("metadata",
+ 			SQUASHFS_CACHED_BLKS, SQUASHFS_METADATA_SIZE);
+ 	if (msblk->block_cache == NULL)
+@@ -288,7 +296,7 @@ failed_mount:
+ 	squashfs_cache_delete(msblk->block_cache);
+ 	squashfs_cache_delete(msblk->fragment_cache);
+ 	squashfs_cache_delete(msblk->read_page);
+-	zlib_free(msblk->stream);
++	squashfs_decompressor_free(msblk, msblk->stream);
+ 	kfree(msblk->inode_lookup_table);
+ 	kfree(msblk->fragment_index);
+ 	kfree(msblk->id_table);
+@@ -298,7 +306,6 @@ failed_mount:
+ 	return err;
+ 
+ failure:
+-	zlib_free(msblk->stream);
+ 	kfree(sb->s_fs_info);
+ 	sb->s_fs_info = NULL;
+ 	return -ENOMEM;
+@@ -342,7 +349,7 @@ static void squashfs_put_super(struct su
+ 		squashfs_cache_delete(sbi->block_cache);
+ 		squashfs_cache_delete(sbi->fragment_cache);
+ 		squashfs_cache_delete(sbi->read_page);
+-		zlib_free(sbi->stream);
++		squashfs_decompressor_free(sbi, sbi->stream);
+ 		kfree(sbi->id_table);
+ 		kfree(sbi->fragment_index);
+ 		kfree(sbi->meta_index);
+--- a/fs/squashfs/zlib_wrapper.c
++++ b/fs/squashfs/zlib_wrapper.c
+@@ -30,8 +30,9 @@
+ #include "squashfs_fs_sb.h"
+ #include "squashfs_fs_i.h"
+ #include "squashfs.h"
++#include "decompressor.h"
+ 
+-void *zlib_init()
++static void *zlib_init(void)
+ {
+ 	z_stream *stream = kmalloc(sizeof(z_stream), GFP_KERNEL);
+ 	if (stream == NULL)
+@@ -50,7 +51,7 @@ failed:
+ }
+ 
+ 
+-void zlib_free(void *strm)
++static void zlib_free(void *strm)
+ {
+ 	z_stream *stream = strm;
+ 
+@@ -60,7 +61,7 @@ void zlib_free(void *strm)
+ }
+ 
+ 
+-int zlib_uncompress(struct squashfs_sb_info *msblk, void **buffer,
++static int zlib_uncompress(struct squashfs_sb_info *msblk, void **buffer,
+ 	struct buffer_head **bh, int b, int offset, int length, int srclength,
+ 	int pages)
+ {
+@@ -137,3 +138,13 @@ release_mutex:
+ 
+ 	return -EIO;
+ }
++
++const struct squashfs_decompressor squashfs_zlib_comp_ops = {
++	.init = zlib_init,
++	.free = zlib_free,
++	.decompress = zlib_uncompress,
++	.id = ZLIB_COMPRESSION,
++	.name = "zlib",
++	.supported = 1
++};
++
diff --git a/target/linux/generic/patches-2.6.32/004-squashfs_add_decompressor_lzma_lzo.patch b/target/linux/generic/patches-2.6.32/004-squashfs_add_decompressor_lzma_lzo.patch
new file mode 100644
index 0000000000..a378c00058
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/004-squashfs_add_decompressor_lzma_lzo.patch
@@ -0,0 +1,54 @@
+From 1885ca0a1973944684f252094a703b7c80dfc974 Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Wed, 14 Oct 2009 03:58:11 +0100
+Subject: [PATCH] Squashfs: add decompressor entries for lzma and lzo
+
+Add knowledge of lzma/lzo compression formats to the decompressor
+framework.  For now these are added as unsupported.  Without
+these entries lzma/lzo compressed filesystems will be flagged as
+having unknown compression which is undesirable.
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/decompressor.c |   10 ++++++++++
+ fs/squashfs/squashfs_fs.h  |    4 +++-
+ 2 files changed, 13 insertions(+), 1 deletions(-)
+
+--- a/fs/squashfs/decompressor.c
++++ b/fs/squashfs/decompressor.c
+@@ -36,12 +36,22 @@
+  * Squashfs, allowing multiple decompressors to be easily supported
+  */
+ 
++static const struct squashfs_decompressor squashfs_lzma_unsupported_comp_ops = {
++	NULL, NULL, NULL, LZMA_COMPRESSION, "lzma", 0
++};
++
++static const struct squashfs_decompressor squashfs_lzo_unsupported_comp_ops = {
++	NULL, NULL, NULL, LZO_COMPRESSION, "lzo", 0
++};
++
+ static const struct squashfs_decompressor squashfs_unknown_comp_ops = {
+ 	NULL, NULL, NULL, 0, "unknown", 0
+ };
+ 
+ static const struct squashfs_decompressor *decompressor[] = {
+ 	&squashfs_zlib_comp_ops,
++	&squashfs_lzma_unsupported_comp_ops,
++	&squashfs_lzo_unsupported_comp_ops,
+ 	&squashfs_unknown_comp_ops
+ };
+ 
+--- a/fs/squashfs/squashfs_fs.h
++++ b/fs/squashfs/squashfs_fs.h
+@@ -211,7 +211,9 @@ struct meta_index {
+ /*
+  * definitions for structures on disk
+  */
+-#define ZLIB_COMPRESSION	 1
++#define ZLIB_COMPRESSION	1
++#define LZMA_COMPRESSION	2
++#define LZO_COMPRESSION		3
+ 
+ struct squashfs_super_block {
+ 	__le32			s_magic;
diff --git a/target/linux/generic/patches-2.6.32/005-squashfs_extra_parameter.patch b/target/linux/generic/patches-2.6.32/005-squashfs_extra_parameter.patch
new file mode 100644
index 0000000000..0991681346
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/005-squashfs_extra_parameter.patch
@@ -0,0 +1,42 @@
+From 5f393ede3ddb5dd4cc2a9f243182fac45f1ce10b Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Wed, 14 Oct 2009 04:07:54 +0100
+Subject: [PATCH] Squashfs: add an extra parameter to the decompressor init function
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/decompressor.h |    4 ++--
+ fs/squashfs/zlib_wrapper.c |    2 +-
+ 2 files changed, 3 insertions(+), 3 deletions(-)
+
+--- a/fs/squashfs/decompressor.h
++++ b/fs/squashfs/decompressor.h
+@@ -24,7 +24,7 @@
+  */
+ 
+ struct squashfs_decompressor {
+-	void	*(*init)(void);
++	void	*(*init)(struct squashfs_sb_info *);
+ 	void	(*free)(void *);
+ 	int	(*decompress)(struct squashfs_sb_info *, void **,
+ 		struct buffer_head **, int, int, int, int, int);
+@@ -35,7 +35,7 @@ struct squashfs_decompressor {
+ 
+ static inline void *squashfs_decompressor_init(struct squashfs_sb_info *msblk)
+ {
+-	return msblk->decompressor->init();
++	return msblk->decompressor->init(msblk);
+ }
+ 
+ static inline void squashfs_decompressor_free(struct squashfs_sb_info *msblk,
+--- a/fs/squashfs/zlib_wrapper.c
++++ b/fs/squashfs/zlib_wrapper.c
+@@ -32,7 +32,7 @@
+ #include "squashfs.h"
+ #include "decompressor.h"
+ 
+-static void *zlib_init(void)
++static void *zlib_init(struct squashfs_sb_info *dummy)
+ {
+ 	z_stream *stream = kmalloc(sizeof(z_stream), GFP_KERNEL);
+ 	if (stream == NULL)
diff --git a/target/linux/generic/patches-2.6.32/006-squashfs_add_lzma.patch b/target/linux/generic/patches-2.6.32/006-squashfs_add_lzma.patch
new file mode 100644
index 0000000000..9fd57970f2
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/006-squashfs_add_lzma.patch
@@ -0,0 +1,216 @@
+From f49e1efdd179d54e814ff2a8e8f469496583062c Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Tue, 20 Oct 2009 10:54:36 +0100
+Subject: [PATCH] Squashfs: add LZMA compression
+
+Add support for LZMA compressed filesystems.  This is an initial
+implementation.
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/Kconfig        |    5 ++
+ fs/squashfs/Makefile       |    1 +
+ fs/squashfs/decompressor.c |    4 +
+ fs/squashfs/lzma_wrapper.c |  151 ++++++++++++++++++++++++++++++++++++++++++++
+ fs/squashfs/squashfs.h     |    3 +
+ 5 files changed, 164 insertions(+), 0 deletions(-)
+ create mode 100644 fs/squashfs/lzma_wrapper.c
+
+--- a/fs/squashfs/Kconfig
++++ b/fs/squashfs/Kconfig
+@@ -26,6 +26,11 @@ config SQUASHFS
+ 
+ 	  If unsure, say N.
+ 
++config SQUASHFS_LZMA
++	bool "Include support for LZMA compressed file systems"
++	depends on SQUASHFS
++	select DECOMPRESS_LZMA
++
+ config SQUASHFS_EMBEDDED
+ 
+ 	bool "Additional option for memory-constrained systems" 
+--- a/fs/squashfs/Makefile
++++ b/fs/squashfs/Makefile
+@@ -5,3 +5,4 @@
+ obj-$(CONFIG_SQUASHFS) += squashfs.o
+ squashfs-y += block.o cache.o dir.o export.o file.o fragment.o id.o inode.o
+ squashfs-y += namei.o super.o symlink.o zlib_wrapper.o decompressor.o
++squashfs-$(CONFIG_SQUASHFS_LZMA) += lzma_wrapper.o
+--- a/fs/squashfs/decompressor.c
++++ b/fs/squashfs/decompressor.c
+@@ -50,7 +50,11 @@ static const struct squashfs_decompresso
+ 
+ static const struct squashfs_decompressor *decompressor[] = {
+ 	&squashfs_zlib_comp_ops,
++#ifdef CONFIG_SQUASHFS_LZMA
++	&squashfs_lzma_comp_ops,
++#else
+ 	&squashfs_lzma_unsupported_comp_ops,
++#endif
+ 	&squashfs_lzo_unsupported_comp_ops,
+ 	&squashfs_unknown_comp_ops
+ };
+--- /dev/null
++++ b/fs/squashfs/lzma_wrapper.c
+@@ -0,0 +1,151 @@
++/*
++ * Squashfs - a compressed read only filesystem for Linux
++ *
++ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
++ * Phillip Lougher <phillip@lougher.demon.co.uk>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2,
++ * or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++ *
++ * lzma_wrapper.c
++ */
++
++#include <asm/unaligned.h>
++#include <linux/buffer_head.h>
++#include <linux/mutex.h>
++#include <linux/vmalloc.h>
++#include <linux/decompress/unlzma.h>
++
++#include "squashfs_fs.h"
++#include "squashfs_fs_sb.h"
++#include "squashfs_fs_i.h"
++#include "squashfs.h"
++#include "decompressor.h"
++
++struct squashfs_lzma {
++	void	*input;
++	void	*output;
++};
++
++/* decompress_unlzma.c is currently non re-entrant... */
++DEFINE_MUTEX(lzma_mutex);
++
++/* decompress_unlzma.c doesn't provide any context in its callbacks... */
++static int lzma_error;
++
++static void error(char *m)
++{
++	ERROR("unlzma error: %s\n", m);
++	lzma_error = 1;
++}
++
++	
++static void *lzma_init(struct squashfs_sb_info *msblk)
++{
++	struct squashfs_lzma *stream = kzalloc(sizeof(*stream), GFP_KERNEL);
++	if (stream == NULL)
++		goto failed;
++	stream->input = vmalloc(msblk->block_size);
++	if (stream->input == NULL)
++		goto failed;
++	stream->output = vmalloc(msblk->block_size);
++	if (stream->output == NULL)
++		goto failed2;
++
++	return stream;
++
++failed2:
++	vfree(stream->input);
++failed:
++	ERROR("failed to allocate lzma workspace\n");
++	kfree(stream);
++	return NULL;
++}
++
++
++static void lzma_free(void *strm)
++{
++	struct squashfs_lzma *stream = strm;
++
++	if (stream) {
++		vfree(stream->input);
++		vfree(stream->output);
++	}
++	kfree(stream);
++}
++
++
++static int lzma_uncompress(struct squashfs_sb_info *msblk, void **buffer,
++	struct buffer_head **bh, int b, int offset, int length, int srclength,
++	int pages)
++{
++	struct squashfs_lzma *stream = msblk->stream;
++	void *buff = stream->input;
++	int avail, i, bytes = length, res;
++
++	mutex_lock(&lzma_mutex);
++
++	for (i = 0; i < b; i++) {
++		wait_on_buffer(bh[i]);
++		if (!buffer_uptodate(bh[i]))
++			goto block_release;
++
++		avail = min(bytes, msblk->devblksize - offset);
++		memcpy(buff, bh[i]->b_data + offset, avail);
++		buff += avail;
++		bytes -= avail;
++		offset = 0;
++		put_bh(bh[i]);
++	}
++
++	lzma_error = 0;
++	res = unlzma(stream->input, length, NULL, NULL, stream->output, NULL,
++							error);
++	if (res || lzma_error)
++		goto failed;
++
++	/* uncompressed size is stored in the LZMA header (5 byte offset) */
++	res = bytes = get_unaligned_le32(stream->input + 5);
++	for (i = 0, buff = stream->output; bytes && i < pages; i++) {
++		avail = min_t(int, bytes, PAGE_CACHE_SIZE);
++		memcpy(buffer[i], buff, avail);
++		buff += avail;
++		bytes -= avail;
++	}
++	if (bytes)
++		goto failed;
++
++	mutex_unlock(&lzma_mutex);
++	return res;
++
++block_release:
++	for (; i < b; i++)
++		put_bh(bh[i]);
++
++failed:
++	mutex_unlock(&lzma_mutex);
++
++	ERROR("lzma decompression failed, data probably corrupt\n");
++	return -EIO;
++}
++
++const struct squashfs_decompressor squashfs_lzma_comp_ops = {
++	.init = lzma_init,
++	.free = lzma_free,
++	.decompress = lzma_uncompress,
++	.id = LZMA_COMPRESSION,
++	.name = "lzma",
++	.supported = 1
++};
++
+--- a/fs/squashfs/squashfs.h
++++ b/fs/squashfs/squashfs.h
+@@ -94,3 +94,6 @@ extern const struct address_space_operat
+ 
+ /* zlib_wrapper.c */
+ extern const struct squashfs_decompressor squashfs_zlib_comp_ops;
++
++/* lzma wrapper.c */
++extern const struct squashfs_decompressor squashfs_lzma_comp_ops;
diff --git a/target/linux/generic/patches-2.6.32/007-squashfs_make_lzma_available.patch b/target/linux/generic/patches-2.6.32/007-squashfs_make_lzma_available.patch
new file mode 100644
index 0000000000..7402471624
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/007-squashfs_make_lzma_available.patch
@@ -0,0 +1,165 @@
+From fdf23ed283bc6ef5c25076ce2065f892120ff556 Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Thu, 22 Oct 2009 04:57:38 +0100
+Subject: [PATCH] Squashfs: Make unlzma available to non initramfs/initrd code
+
+Add a config option DECOMPRESS_LZMA_NEEDED which allows subsystems to
+specify they need the unlzma code.  Normally decompress_unlzma.c is
+compiled with __init and unlzma is not exported to modules.
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/Kconfig                   |    1 +
+ include/linux/decompress/bunzip2_mm.h |   12 ++++++++++++
+ include/linux/decompress/inflate_mm.h |   12 ++++++++++++
+ include/linux/decompress/mm.h         |    3 ---
+ include/linux/decompress/unlzma_mm.h  |   20 ++++++++++++++++++++
+ lib/Kconfig                           |    3 +++
+ lib/decompress_bunzip2.c              |    1 +
+ lib/decompress_inflate.c              |    1 +
+ lib/decompress_unlzma.c               |    5 ++++-
+ 9 files changed, 54 insertions(+), 4 deletions(-)
+ create mode 100644 include/linux/decompress/bunzip2_mm.h
+ create mode 100644 include/linux/decompress/inflate_mm.h
+ create mode 100644 include/linux/decompress/unlzma_mm.h
+
+--- a/fs/squashfs/Kconfig
++++ b/fs/squashfs/Kconfig
+@@ -30,6 +30,7 @@ config SQUASHFS_LZMA
+ 	bool "Include support for LZMA compressed file systems"
+ 	depends on SQUASHFS
+ 	select DECOMPRESS_LZMA
++	select DECOMPRESS_LZMA_NEEDED
+ 
+ config SQUASHFS_EMBEDDED
+ 
+--- /dev/null
++++ b/include/linux/decompress/bunzip2_mm.h
+@@ -0,0 +1,12 @@
++#ifndef BUNZIP2_MM_H
++#define BUNZIP2_MM_H
++
++#ifdef STATIC
++/* Code active when included from pre-boot environment: */
++#define INIT
++#else
++/* Compile for initramfs/initrd code only */
++#define INIT __init
++#endif
++
++#endif
+--- /dev/null
++++ b/include/linux/decompress/inflate_mm.h
+@@ -0,0 +1,12 @@
++#ifndef INFLATE_MM_H
++#define INFLATE_MM_H
++
++#ifdef STATIC
++/* Code active when included from pre-boot environment: */
++#define INIT
++#else
++/* Compile for initramfs/initrd code only */
++#define INIT __init
++#endif
++
++#endif
+--- a/include/linux/decompress/mm.h
++++ b/include/linux/decompress/mm.h
+@@ -63,8 +63,6 @@ static void free(void *where)
+ 
+ #define set_error_fn(x)
+ 
+-#define INIT
+-
+ #else /* STATIC */
+ 
+ /* Code active when compiled standalone for use when loading ramdisk: */
+@@ -87,7 +85,6 @@ static void free(void *where)
+ static void(*error)(char *m);
+ #define set_error_fn(x) error = x;
+ 
+-#define INIT __init
+ #define STATIC
+ 
+ #include <linux/init.h>
+--- /dev/null
++++ b/include/linux/decompress/unlzma_mm.h
+@@ -0,0 +1,20 @@
++#ifndef UNLZMA_MM_H
++#define UNLZMA_MM_H
++
++#ifdef STATIC
++
++/* Code active when included from pre-boot environment: */
++#define INIT
++
++#elif defined(CONFIG_DECOMPRESS_LZMA_NEEDED)
++
++/* Make it available to non initramfs/initrd code */
++#define INIT
++#include <linux/module.h>
++#else
++
++/* Compile for initramfs/initrd code only */
++#define INIT __init
++#endif
++
++#endif
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -117,6 +117,9 @@ config DECOMPRESS_BZIP2
+ config DECOMPRESS_LZMA
+ 	tristate
+ 
++config DECOMPRESS_LZMA_NEEDED
++	 boolean
++
+ #
+ # Generic allocator support is selected if needed
+ #
+--- a/lib/decompress_bunzip2.c
++++ b/lib/decompress_bunzip2.c
+@@ -52,6 +52,7 @@
+ #include <linux/slab.h>
+ #endif /* STATIC */
+ 
++#include <linux/decompress/bunzip2_mm.h>
+ #include <linux/decompress/mm.h>
+ 
+ #ifndef INT_MAX
+--- a/lib/decompress_inflate.c
++++ b/lib/decompress_inflate.c
+@@ -23,6 +23,7 @@
+ 
+ #endif /* STATIC */
+ 
++#include <linux/decompress/inflate_mm.h>
+ #include <linux/decompress/mm.h>
+ 
+ #define GZIP_IOBUF_SIZE (16*1024)
+--- a/lib/decompress_unlzma.c
++++ b/lib/decompress_unlzma.c
+@@ -36,6 +36,7 @@
+ #include <linux/slab.h>
+ #endif /* STATIC */
+ 
++#include <linux/decompress/unlzma_mm.h>
+ #include <linux/decompress/mm.h>
+ 
+ #define	MIN(a, b) (((a) < (b)) ? (a) : (b))
+@@ -531,7 +532,7 @@ static inline void INIT process_bit1(str
+ 
+ 
+ 
+-STATIC inline int INIT unlzma(unsigned char *buf, int in_len,
++STATIC int INIT unlzma(unsigned char *buf, int in_len,
+ 			      int(*fill)(void*, unsigned int),
+ 			      int(*flush)(void*, unsigned int),
+ 			      unsigned char *output,
+@@ -664,4 +665,6 @@ STATIC int INIT decompress(unsigned char
+ {
+ 	return unlzma(buf, in_len - 4, fill, flush, output, posp, error_fn);
+ }
++#elif defined(CONFIG_DECOMPRESS_LZMA_NEEDED)
++EXPORT_SYMBOL(unlzma);
+ #endif
diff --git a/target/linux/generic/patches-2.6.32/011-mips_boot.patch b/target/linux/generic/patches-2.6.32/011-mips_boot.patch
new file mode 100644
index 0000000000..c2a043acde
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/011-mips_boot.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
+@@ -121,6 +121,8 @@
+ #endif
+ 	.endm
+ 
++	j kernel_entry
++	nop
+ #ifndef CONFIG_NO_EXCEPT_FILL
+ 	/*
+ 	 * Reserved space for exception handlers.
diff --git a/target/linux/generic/patches-2.6.32/012-extra_optimization.patch b/target/linux/generic/patches-2.6.32/012-extra_optimization.patch
new file mode 100644
index 0000000000..77eb10377c
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/012-extra_optimization.patch
@@ -0,0 +1,21 @@
+--- a/Makefile
++++ b/Makefile
+@@ -523,7 +523,7 @@ all: vmlinux
+ ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+ KBUILD_CFLAGS	+= -Os
+ else
+-KBUILD_CFLAGS	+= -O2
++KBUILD_CFLAGS	+= -O2 -fno-reorder-blocks -fno-tree-ch
+ endif
+ 
+ include $(srctree)/arch/$(SRCARCH)/Makefile
+@@ -561,6 +561,9 @@ endif
+ NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
+ CHECKFLAGS     += $(NOSTDINC_FLAGS)
+ 
++# improve gcc optimization
++CFLAGS += $(call cc-option,-funit-at-a-time,)
++
+ # warn about C99 declaration after statement
+ KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
+ 
diff --git a/target/linux/generic/patches-2.6.32/013-gcc4_inline_fix.patch b/target/linux/generic/patches-2.6.32/013-gcc4_inline_fix.patch
new file mode 100644
index 0000000000..77ab405439
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/013-gcc4_inline_fix.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/include/asm/system.h
++++ b/arch/mips/include/asm/system.h
+@@ -194,7 +194,7 @@ extern __u64 __xchg_u64_unsupported_on_3
+ #define __xchg_u64 __xchg_u64_unsupported_on_32bit_kernels
+ #endif
+ 
+-static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
++static __always_inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+ {
+ 	switch (size) {
+ 	case 4:
diff --git a/target/linux/generic/patches-2.6.32/014-samsung_flash.patch b/target/linux/generic/patches-2.6.32/014-samsung_flash.patch
new file mode 100644
index 0000000000..7010d367b8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/014-samsung_flash.patch
@@ -0,0 +1,50 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -325,6 +325,8 @@ static struct cfi_fixup fixup_table[] = 
+ static void cfi_fixup_major_minor(struct cfi_private *cfi,
+ 				  struct cfi_pri_amdstd *extp)
+ {
++	// manufacturers defined in include/linux/mtd/cfi.h
++
+ 	if (cfi->mfr == CFI_MFR_SAMSUNG && cfi->id == 0x257e &&
+ 	    extp->MajorVersion == '0')
+ 		extp->MajorVersion = '1';
+@@ -355,6 +357,9 @@ struct mtd_info *cfi_cmdset_0002(struct 
+ 	mtd->name    = map->name;
+ 	mtd->writesize = 1;
+ 
++	printk(" CFI mfr 0x%08x\n", cfi->mfr);	// TODO: Is there a more general place to print this info?
++	printk(" CFI id  0x%08x\n", cfi->id);
++
+ 	if (cfi->cfi_mode==CFI_MODE_CFI){
+ 		unsigned char bootloc;
+ 		/*
+@@ -373,16 +378,24 @@ struct mtd_info *cfi_cmdset_0002(struct 
+ 
+ 		cfi_fixup_major_minor(cfi, extp);
+ 
+-		if (extp->MajorVersion != '1' ||
+-		    (extp->MinorVersion < '0' || extp->MinorVersion > '4')) {
++		// valid primary extension versions are: 1.0, 1.1, 1.2, 1.3
++		// see: http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_r20.pdf, page 19 and on
++		//      http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_100_20011201.pdf
++		if (extp->MajorVersion < '1' ||
++		    extp->MajorVersion > '1' ||
++		    (extp->MajorVersion == '1' && ( extp->MinorVersion < '0' || extp->MinorVersion > '3'))) {
+ 			printk(KERN_ERR "  Unknown Amd/Fujitsu Extended Query "
+-			       "version %c.%c.\n",  extp->MajorVersion,
+-			       extp->MinorVersion);
++			       "version %c.%c (0x%02x/0x%02x).\n",
++			       extp->MajorVersion, extp->MinorVersion,
++			       extp->MajorVersion, extp->MinorVersion);
+ 			kfree(extp);
+ 			kfree(mtd);
+ 			return NULL;
+ 		}
+ 
++		printk("  Amd/Fujitsu Extended Query version %c.%c.\n",
++		       extp->MajorVersion, extp->MinorVersion);
++
+ 		/* Install our own private info structure */
+ 		cfi->cmdset_priv = extp;
+ 
diff --git a/target/linux/generic/patches-2.6.32/020-mips_multi_machine_support.patch b/target/linux/generic/patches-2.6.32/020-mips_multi_machine_support.patch
new file mode 100644
index 0000000000..d73b2d1523
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/020-mips_multi_machine_support.patch
@@ -0,0 +1,208 @@
+--- /dev/null
++++ b/arch/mips/include/asm/mips_machine.h
+@@ -0,0 +1,54 @@
++/*
++ *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ */
++
++#ifndef __ASM_MIPS_MACHINE_H
++#define __ASM_MIPS_MACHINE_H
++
++#include <linux/init.h>
++#include <linux/list.h>
++
++#include <asm/bootinfo.h>
++
++struct mips_machine {
++	unsigned long		mach_type;
++	const char		*mach_id;
++	const char		*mach_name;
++	void			(*mach_setup)(void);
++};
++
++#define MIPS_MACHINE(_type, _id, _name, _setup) 		\
++static const char machine_name_##_type[] __initconst		\
++			__aligned(1) = _name;			\
++static const char machine_id_##_type[] __initconst		\
++			__aligned(1) = _id;			\
++static struct mips_machine machine_##_type			\
++		__used __section(.mips.machines.init) =		\
++{								\
++	.mach_type	= _type,				\
++	.mach_id	= machine_id_##_type,			\
++	.mach_name	= machine_name_##_type,			\
++	.mach_setup	= _setup,				\
++};
++
++extern long __mips_machines_start;
++extern long __mips_machines_end;
++
++#ifdef CONFIG_MIPS_MACHINE
++int  mips_machtype_setup(char *id) __init;
++void mips_machine_setup(void) __init;
++void mips_set_machine_name(const char *name) __init;
++char *mips_get_machine_name(void);
++#else
++static inline int mips_machtype_setup(char *id) { return 1; }
++static inline void mips_machine_setup(void) { }
++static inline void mips_set_machine_name(const char *name) { }
++static inline char *mips_get_machine_name(void) { return NULL; }
++#endif /* CONFIG_MIPS_MACHINE */
++
++#endif /* __ASM_MIPS_MACHINE_H */
+--- /dev/null
++++ b/arch/mips/kernel/mips_machine.c
+@@ -0,0 +1,86 @@
++/*
++ *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ */
++#include <linux/mm.h>
++#include <linux/string.h>
++#include <linux/slab.h>
++
++#include <asm/mips_machine.h>
++
++static struct mips_machine *mips_machine __initdata;
++static char *mips_machine_name = "Unknown";
++
++#define for_each_machine(mach) \
++	for ((mach) = (struct mips_machine *)&__mips_machines_start; \
++	     (mach) && \
++	     (unsigned long)(mach) < (unsigned long)&__mips_machines_end; \
++	     (mach)++)
++
++__init void mips_set_machine_name(const char *name)
++{
++	char *p;
++
++	if (name == NULL)
++		return;
++
++	p = kstrdup(name, GFP_KERNEL);
++	if (!p)
++		pr_err("MIPS: no memory for machine_name\n");
++
++	mips_machine_name = p;
++}
++
++char *mips_get_machine_name(void)
++{
++	return mips_machine_name;
++}
++
++__init int mips_machtype_setup(char *id)
++{
++	struct mips_machine *mach;
++
++	for_each_machine(mach) {
++		if (mach->mach_id == NULL)
++			continue;
++
++		if (strcmp(mach->mach_id, id) == 0) {
++			mips_machtype = mach->mach_type;
++			return 0;
++		}
++	}
++
++	pr_err("MIPS: no machine found for id '%s', supported machines:\n", id);
++	pr_err("%-24s : %s\n", "id", "name");
++	for_each_machine(mach)
++		pr_err("%-24s : %s\n", mach->mach_id, mach->mach_name);
++
++	return 1;
++}
++
++__setup("machtype=", mips_machtype_setup);
++
++__init void mips_machine_setup(void)
++{
++	struct mips_machine *mach;
++
++	for_each_machine(mach) {
++		if (mips_machtype == mach->mach_type) {
++			mips_machine = mach;
++			break;
++		}
++	}
++
++	if (!mips_machine)
++		return;
++
++	mips_set_machine_name(mips_machine->mach_name);
++	pr_info("MIPS: machine is %s\n", mips_machine_name);
++
++	if (mips_machine->mach_setup)
++		mips_machine->mach_setup();
++}
+--- a/arch/mips/kernel/Makefile
++++ b/arch/mips/kernel/Makefile
+@@ -87,6 +87,7 @@ obj-$(CONFIG_GPIO_TXX9)		+= gpio_txx9.o
+ 
+ obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
+ obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
++obj-$(CONFIG_MIPS_MACHINE)	+= mips_machine.o
+ 
+ CFLAGS_cpu-bugs64.o	= $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
+ 
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -854,6 +854,9 @@ config MIPS_DISABLE_OBSOLETE_IDE
+ config SYNC_R4K
+ 	bool
+ 
++config MIPS_MACHINE
++	def_bool n
++
+ config NO_IOPORT
+ 	def_bool n
+ 
+--- a/arch/mips/kernel/proc.c
++++ b/arch/mips/kernel/proc.c
+@@ -12,6 +12,7 @@
+ #include <asm/cpu-features.h>
+ #include <asm/mipsregs.h>
+ #include <asm/processor.h>
++#include <asm/mips_machine.h>
+ 
+ unsigned int vced_count, vcei_count;
+ 
+@@ -31,8 +32,12 @@ static int show_cpuinfo(struct seq_file 
+ 	/*
+ 	 * For the first processor also print the system type
+ 	 */
+-	if (n == 0)
++	if (n == 0) {
+ 		seq_printf(m, "system type\t\t: %s\n", get_system_type());
++		if (mips_get_machine_name())
++			seq_printf(m, "machine\t\t\t: %s\n",
++				   mips_get_machine_name());
++	}
+ 
+ 	seq_printf(m, "processor\t\t: %ld\n", n);
+ 	sprintf(fmt, "cpu model\t\t: %%s V%%d.%%d%s\n",
+--- a/arch/mips/kernel/vmlinux.lds.S
++++ b/arch/mips/kernel/vmlinux.lds.S
+@@ -97,6 +97,13 @@ SECTIONS
+ 	INIT_TEXT_SECTION(PAGE_SIZE)
+ 	INIT_DATA_SECTION(16)
+ 
++	. = ALIGN(4);
++	.mips.machines.init : AT(ADDR(.mips.machines.init) - LOAD_OFFSET) {
++		__mips_machines_start = .;
++		*(.mips.machines.init)
++		__mips_machines_end = .;
++	}
++
+ 	/* .exit.text is discarded at runtime, not link time, to deal with
+ 	 * references from .rodata
+ 	 */
diff --git a/target/linux/generic/patches-2.6.32/021-mips_image_cmdline_hack.patch b/target/linux/generic/patches-2.6.32/021-mips_image_cmdline_hack.patch
new file mode 100644
index 0000000000..8b9cfe32cd
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/021-mips_image_cmdline_hack.patch
@@ -0,0 +1,28 @@
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -857,6 +857,10 @@ config SYNC_R4K
+ config MIPS_MACHINE
+ 	def_bool n
+ 
++config IMAGE_CMDLINE_HACK
++	bool "OpenWrt specific image command line hack"
++	default n
++
+ config NO_IOPORT
+ 	def_bool n
+ 
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
+@@ -143,6 +143,12 @@ FEXPORT(__kernel_entry)
+ 	j	kernel_entry
+ #endif
+ 
++#ifdef CONFIG_IMAGE_CMDLINE_HACK
++	.ascii	"CMDLINE:"
++EXPORT(__image_cmdline)
++	.fill	0x400
++#endif /* CONFIG_IMAGE_CMDLINE_HACK */
++
+ 	__REF
+ 
+ NESTED(kernel_entry, 16, sp)			# kernel entry point
diff --git a/target/linux/generic/patches-2.6.32/022-mips_use_generic_thread_info_allocator.patch b/target/linux/generic/patches-2.6.32/022-mips_use_generic_thread_info_allocator.patch
new file mode 100644
index 0000000000..786afd1dc6
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/022-mips_use_generic_thread_info_allocator.patch
@@ -0,0 +1,18 @@
+--- a/arch/mips/include/asm/thread_info.h
++++ b/arch/mips/include/asm/thread_info.h
+@@ -83,6 +83,7 @@ register struct thread_info *__current_t
+ #define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER)
+ #define THREAD_MASK (THREAD_SIZE - 1UL)
+ 
++#if 0
+ #define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+ 
+ #ifdef CONFIG_DEBUG_STACK_USAGE
+@@ -92,6 +93,7 @@ register struct thread_info *__current_t
+ #endif
+ 
+ #define free_thread_info(info) kfree(info)
++#endif
+ 
+ #endif /* !__ASSEMBLY__ */
+ 
diff --git a/target/linux/generic/patches-2.6.32/023-mips-fix-kexec.patch b/target/linux/generic/patches-2.6.32/023-mips-fix-kexec.patch
new file mode 100644
index 0000000000..e6928dde91
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/023-mips-fix-kexec.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/kernel/machine_kexec.c
++++ b/arch/mips/kernel/machine_kexec.c
+@@ -52,7 +52,7 @@ machine_kexec(struct kimage *image)
+ 	reboot_code_buffer =
+ 	  (unsigned long)page_address(image->control_code_page);
+ 
+-	kexec_start_address = image->start;
++	kexec_start_address = (unsigned long) phys_to_virt(image->start);
+ 	kexec_indirection_page =
+ 		(unsigned long) phys_to_virt(image->head & PAGE_MASK);
+ 
diff --git a/target/linux/generic/patches-2.6.32/025-mips_disable_fpu.patch b/target/linux/generic/patches-2.6.32/025-mips_disable_fpu.patch
new file mode 100644
index 0000000000..e1e9f73699
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/025-mips_disable_fpu.patch
@@ -0,0 +1,155 @@
+MIPS: allow disabling the kernel FPU emulator
+
+This patch allows turning off the in-kernel Algorithmics
+FPU emulator support, which allows one to save a couple of
+precious blocks on an embedded system.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+--
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -842,6 +842,17 @@ config I8259
+ config MIPS_BONITO64
+ 	bool
+ 
++config MIPS_FPU_EMU
++	bool "Enable FPU emulation"
++	default y
++	help
++	   This option allows building a kernel with or without the Algorithmics
++	   FPU emulator enabled. Turning off this option results in a kernel which
++	   does not catch floating operations exceptions. Make sure that your toolchain
++	   is configured to enable software floating point emulation in that case.
++		
++	   If unsure say Y here.
++
+ config MIPS_MSC
+ 	bool
+ 
+--- a/arch/mips/math-emu/Makefile
++++ b/arch/mips/math-emu/Makefile
+@@ -2,12 +2,14 @@
+ # Makefile for the Linux/MIPS kernel FPU emulation.
+ #
+ 
+-obj-y	:= cp1emu.o ieee754m.o ieee754d.o ieee754dp.o ieee754sp.o ieee754.o \
++obj-y	:=	kernel_linkage.o dsemul.o cp1emu.o
++
++obj-$(CONFIG_MIPS_FPU_EMU)	+= ieee754m.o ieee754d.o ieee754dp.o ieee754sp.o ieee754.o \
+ 	   ieee754xcpt.o dp_frexp.o dp_modf.o dp_div.o dp_mul.o dp_sub.o \
+ 	   dp_add.o dp_fsp.o dp_cmp.o dp_logb.o dp_scalb.o dp_simple.o \
+ 	   dp_tint.o dp_fint.o dp_tlong.o dp_flong.o sp_frexp.o sp_modf.o \
+ 	   sp_div.o sp_mul.o sp_sub.o sp_add.o sp_fdp.o sp_cmp.o sp_logb.o \
+ 	   sp_scalb.o sp_simple.o sp_tint.o sp_fint.o sp_tlong.o sp_flong.o \
+-	   dp_sqrt.o sp_sqrt.o kernel_linkage.o dsemul.o
++	   dp_sqrt.o sp_sqrt.o
+ 
+ EXTRA_CFLAGS += -Werror
+--- a/arch/mips/math-emu/cp1emu.c
++++ b/arch/mips/math-emu/cp1emu.c
+@@ -56,6 +56,12 @@
+ #endif
+ #define __mips 4
+ 
++/* Further private data for which no space exists in mips_fpu_struct */
++
++struct mips_fpu_emulator_stats fpuemustats;
++
++#ifdef CONFIG_MIPS_FPU_EMU
++
+ /* Function which emulates a floating point instruction. */
+ 
+ static int fpu_emu(struct pt_regs *, struct mips_fpu_struct *,
+@@ -66,10 +72,6 @@ static int fpux_emu(struct pt_regs *,
+ 	struct mips_fpu_struct *, mips_instruction);
+ #endif
+ 
+-/* Further private data for which no space exists in mips_fpu_struct */
+-
+-struct mips_fpu_emulator_stats fpuemustats;
+-
+ /* Control registers */
+ 
+ #define FPCREG_RID	0	/* $0  = revision id */
+@@ -1274,6 +1276,13 @@ int fpu_emulator_cop1Handler(struct pt_r
+ 
+ 	return sig;
+ }
++#else
++int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
++        int has_fpu)
++{
++	return 0;
++}
++#endif /* CONFIG_MIPS_FPU_EMU */
+ 
+ #ifdef CONFIG_DEBUG_FS
+ extern struct dentry *mips_debugfs_dir;
+--- a/arch/mips/math-emu/dsemul.c
++++ b/arch/mips/math-emu/dsemul.c
+@@ -109,6 +109,7 @@ int mips_dsemul(struct pt_regs *regs, mi
+ 	return SIGILL;		/* force out of emulation loop */
+ }
+ 
++#ifdef CONFIG_MIPS_FPU_EMU
+ int do_dsemulret(struct pt_regs *xcp)
+ {
+ 	struct emuframe __user *fr;
+@@ -165,3 +166,9 @@ int do_dsemulret(struct pt_regs *xcp)
+ 
+ 	return 1;
+ }
++#else
++int do_dsemulret(struct pt_regs *xcp)
++{
++	return 0;
++}
++#endif /* CONFIG_MIPS_FPU_EMU */
+--- a/arch/mips/math-emu/kernel_linkage.c
++++ b/arch/mips/math-emu/kernel_linkage.c
+@@ -29,6 +29,7 @@
+ 
+ #define SIGNALLING_NAN 0x7ff800007ff80000LL
+ 
++#ifdef CONFIG_MIPS_FPU_EMU
+ void fpu_emulator_init_fpu(void)
+ {
+ 	static int first = 1;
+@@ -112,4 +113,36 @@ int fpu_emulator_restore_context32(struc
+ 
+ 	return err;
+ }
+-#endif
++#endif	/* CONFIG_64BIT */
++#else
++
++void fpu_emulator_init_fpu(void)
++{
++	printk(KERN_INFO "FPU emulator disabled, make sure your toolchain"
++		"was compiled with software floating point support (soft-float)\n");
++	return;
++}
++
++int fpu_emulator_save_context(struct sigcontext __user *sc)
++{
++	return 0;
++}
++
++int fpu_emulator_restore_context(struct sigcontext __user *sc)
++{
++	return 0;
++}
++
++int fpu_emulator_save_context32(struct sigcontext32 __user *sc)
++{
++	return 0;
++}
++
++int fpu_emulator_restore_context32(struct sigcontext32 __user *sc)
++{
++	return 0;
++}
++
++#ifdef CONFIG_64BIT
++#endif	/* CONFIG_64BIT */
++#endif /* CONFIG_MIPS_FPU_EMU */
diff --git a/target/linux/generic/patches-2.6.32/027-mips_module_reloc.patch b/target/linux/generic/patches-2.6.32/027-mips_module_reloc.patch
new file mode 100644
index 0000000000..c0dc64e269
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/027-mips_module_reloc.patch
@@ -0,0 +1,368 @@
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -83,7 +83,7 @@ all-$(CONFIG_BOOT_ELF64)	:= $(vmlinux-64
+ cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe
+ cflags-y			+= -msoft-float
+ LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
+-MODFLAGS			+= -mlong-calls
++MODFLAGS			+= -mno-long-calls
+ 
+ cflags-y += -ffreestanding
+ 
+--- a/arch/mips/include/asm/module.h
++++ b/arch/mips/include/asm/module.h
+@@ -9,6 +9,11 @@ struct mod_arch_specific {
+ 	struct list_head dbe_list;
+ 	const struct exception_table_entry *dbe_start;
+ 	const struct exception_table_entry *dbe_end;
++
++	void *phys_plt_tbl;
++	void *virt_plt_tbl;
++	unsigned int phys_plt_offset;
++	unsigned int virt_plt_offset;
+ };
+ 
+ typedef uint8_t Elf64_Byte;		/* Type for a 8-bit quantity.  */
+--- a/arch/mips/kernel/module.c
++++ b/arch/mips/kernel/module.c
+@@ -43,6 +43,117 @@ static struct mips_hi16 *mips_hi16_list;
+ static LIST_HEAD(dbe_list);
+ static DEFINE_SPINLOCK(dbe_lock);
+ 
++/*
++ * Get the potential max trampolines size required of the init and
++ * non-init sections. Only used if we cannot find enough contiguous
++ * physically mapped memory to put the module into.
++ */
++static unsigned int
++get_plt_size(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
++             const char *secstrings, unsigned int symindex, bool is_init)
++{
++	unsigned long ret = 0;
++	unsigned int i, j;
++	Elf_Sym *syms;
++
++	/* Everything marked ALLOC (this includes the exported symbols) */
++	for (i = 1; i < hdr->e_shnum; ++i) {
++		unsigned int info = sechdrs[i].sh_info;
++
++		if (sechdrs[i].sh_type != SHT_REL
++		    && sechdrs[i].sh_type != SHT_RELA)
++			continue;
++
++		/* Not a valid relocation section? */
++		if (info >= hdr->e_shnum)
++			continue;
++
++		/* Don't bother with non-allocated sections */
++		if (!(sechdrs[info].sh_flags & SHF_ALLOC))
++			continue;
++
++		/* If it's called *.init*, and we're not init, we're
++                   not interested */
++		if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0)
++		    != is_init)
++			continue;
++
++		syms = (Elf_Sym *) sechdrs[symindex].sh_addr;
++		if (sechdrs[i].sh_type == SHT_REL) {
++			Elf_Mips_Rel *rel = (void *) sechdrs[i].sh_addr;
++			unsigned int size = sechdrs[i].sh_size / sizeof(*rel);
++
++			for (j = 0; j < size; ++j) {
++				Elf_Sym *sym;
++
++				if (ELF_MIPS_R_TYPE(rel[j]) != R_MIPS_26)
++					continue;
++
++				sym = syms + ELF_MIPS_R_SYM(rel[j]);
++				if (!is_init && sym->st_shndx != SHN_UNDEF)
++					continue;
++
++				ret += 4 * sizeof(int);
++			}
++		} else {
++			Elf_Mips_Rela *rela = (void *) sechdrs[i].sh_addr;
++			unsigned int size = sechdrs[i].sh_size / sizeof(*rela);
++
++			for (j = 0; j < size; ++j) {
++				Elf_Sym *sym;
++
++				if (ELF_MIPS_R_TYPE(rela[j]) != R_MIPS_26)
++					continue;
++
++				sym = syms + ELF_MIPS_R_SYM(rela[j]);
++				if (!is_init && sym->st_shndx != SHN_UNDEF)
++					continue;
++
++				ret += 4 * sizeof(int);
++			}
++		}
++	}
++
++	return ret;
++}
++
++#ifndef MODULE_START
++static void *alloc_phys(unsigned long size)
++{
++	unsigned order;
++	struct page *page;
++	struct page *p;
++
++	size = PAGE_ALIGN(size);
++	order = get_order(size);
++
++	page = alloc_pages(GFP_KERNEL | __GFP_NORETRY | __GFP_NOWARN |
++			__GFP_THISNODE, order);
++	if (!page)
++		return NULL;
++
++	split_page(page, order);
++
++	for (p = page + (size >> PAGE_SHIFT); p < page + (1 << order); ++p)
++		__free_page(p);
++
++	return page_address(page);
++}
++#endif
++
++static void free_phys(void *ptr, unsigned long size)
++{
++	struct page *page;
++	struct page *end;
++
++	page = virt_to_page(ptr);
++	end = page + (PAGE_ALIGN(size) >> PAGE_SHIFT);
++
++	for (; page < end; ++page)
++		__free_page(page);
++}
++
++
+ void *module_alloc(unsigned long size)
+ {
+ #ifdef MODULE_START
+@@ -58,21 +169,99 @@ void *module_alloc(unsigned long size)
+ 
+ 	return __vmalloc_area(area, GFP_KERNEL, PAGE_KERNEL);
+ #else
++	void *ptr;
++
+ 	if (size == 0)
+ 		return NULL;
+-	return vmalloc(size);
++
++	ptr = alloc_phys(size);
++
++	/* If we failed to allocate physically contiguous memory,
++	 * fall back to regular vmalloc. The module loader code will
++	 * create jump tables to handle long jumps */
++	if (!ptr)
++		return vmalloc(size);
++
++	return ptr;
++#endif
++}
++
++static inline bool is_phys_addr(void *ptr)
++{
++#ifdef CONFIG_64BIT
++	return (KSEGX((unsigned long)ptr) == CKSEG0);
++#else
++	return (KSEGX(ptr) == KSEG0);
+ #endif
+ }
+ 
+ /* Free memory returned from module_alloc */
+ void module_free(struct module *mod, void *module_region)
+ {
+-	vfree(module_region);
++	if (is_phys_addr(module_region)) {
++		if (mod->module_init == module_region)
++			free_phys(module_region, mod->init_size);
++		else if (mod->module_core == module_region)
++			free_phys(module_region, mod->core_size);
++		else
++			BUG();
++	} else {
++		vfree(module_region);
++	}
++}
++
++static void *__module_alloc(int size, bool phys)
++{
++	void *ptr;
++
++	if (phys)
++		ptr = kmalloc(size, GFP_KERNEL);
++	else
++		ptr = vmalloc(size);
++	return ptr;
++}
++
++static void __module_free(void *ptr)
++{
++	if (is_phys_addr(ptr))
++		kfree(ptr);
++	else
++		vfree(ptr);
+ }
+ 
+ int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
+ 			      char *secstrings, struct module *mod)
+ {
++	unsigned int symindex = 0;
++	unsigned int core_size, init_size;
++	int i;
++
++	for (i = 1; i < hdr->e_shnum; i++)
++		if (sechdrs[i].sh_type == SHT_SYMTAB)
++			symindex = i;
++
++	core_size = get_plt_size(hdr, sechdrs, secstrings, symindex, false);
++	init_size = get_plt_size(hdr, sechdrs, secstrings, symindex, true);
++
++	mod->arch.phys_plt_offset = 0;
++	mod->arch.virt_plt_offset = 0;
++	mod->arch.phys_plt_tbl = NULL;
++	mod->arch.virt_plt_tbl = NULL;
++
++	if ((core_size + init_size) == 0)
++		return 0;
++
++	mod->arch.phys_plt_tbl = __module_alloc(core_size + init_size, 1);
++	if (!mod->arch.phys_plt_tbl)
++		return -ENOMEM;
++
++	mod->arch.virt_plt_tbl = __module_alloc(core_size + init_size, 0);
++	if (!mod->arch.virt_plt_tbl) {
++		__module_free(mod->arch.phys_plt_tbl);
++		mod->arch.phys_plt_tbl = NULL;
++		return -ENOMEM;
++	}
++
+ 	return 0;
+ }
+ 
+@@ -95,28 +284,36 @@ static int apply_r_mips_32_rela(struct m
+ 	return 0;
+ }
+ 
+-static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
++static Elf_Addr add_plt_entry_to(unsigned *plt_offset,
++				 void *start, Elf_Addr v)
+ {
+-	if (v % 4) {
+-		pr_err("module %s: dangerous R_MIPS_26 REL relocation\n",
+-		       me->name);
+-		return -ENOEXEC;
+-	}
++	unsigned *tramp = start + *plt_offset;
++	*plt_offset += 4 * sizeof(int);
+ 
+-	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+-		printk(KERN_ERR
+-		       "module %s: relocation overflow\n",
+-		       me->name);
+-		return -ENOEXEC;
+-	}
++	/* adjust carry for addiu */
++	if (v & 0x00008000)
++		v += 0x10000;
+ 
+-	*location = (*location & ~0x03ffffff) |
+-	            ((*location + (v >> 2)) & 0x03ffffff);
++	tramp[0] = 0x3c190000 | (v >> 16);      /* lui t9, hi16 */
++	tramp[1] = 0x27390000 | (v & 0xffff);   /* addiu t9, t9, lo16 */
++	tramp[2] = 0x03200008;                  /* jr t9 */
++	tramp[3] = 0x00000000;                  /* nop */
+ 
+-	return 0;
++	return (Elf_Addr) tramp;
+ }
+ 
+-static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v)
++static Elf_Addr add_plt_entry(struct module *me, void *location, Elf_Addr v)
++{
++	if (is_phys_addr(location))
++		return add_plt_entry_to(&me->arch.phys_plt_offset,
++				me->arch.phys_plt_tbl, v);
++	else
++		return add_plt_entry_to(&me->arch.virt_plt_offset,
++				me->arch.virt_plt_tbl, v);
++
++}
++
++static int set_r_mips_26(struct module *me, u32 *location, u32 ofs, Elf_Addr v)
+ {
+ 	if (v % 4) {
+ 		pr_err("module %s: dangerous R_MIPS_26 RELArelocation\n",
+@@ -125,17 +322,31 @@ static int apply_r_mips_26_rela(struct m
+ 	}
+ 
+ 	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+-		printk(KERN_ERR
++	    v = add_plt_entry(me, location, v + (ofs << 2));
++		if (!v) {
++			printk(KERN_ERR
+ 		       "module %s: relocation overflow\n",
+ 		       me->name);
+-		return -ENOEXEC;
++			return -ENOEXEC;
++		}
++		ofs = 0;
+ 	}
+ 
+-	*location = (*location & ~0x03ffffff) | ((v >> 2) & 0x03ffffff);
++	*location = (*location & ~0x03ffffff) | ((ofs + (v >> 2)) & 0x03ffffff);
+ 
+ 	return 0;
+ }
+ 
++static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
++{
++	return set_r_mips_26(me, location, *location & 0x03ffffff, v);
++}
++
++static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v)
++{
++	return set_r_mips_26(me, location, 0, v);
++}
++
+ static int apply_r_mips_hi16_rel(struct module *me, u32 *location, Elf_Addr v)
+ {
+ 	struct mips_hi16 *n;
+@@ -400,11 +611,32 @@ int module_finalize(const Elf_Ehdr *hdr,
+ 		list_add(&me->arch.dbe_list, &dbe_list);
+ 		spin_unlock_irq(&dbe_lock);
+ 	}
++
++	/* Get rid of the fixup trampoline if we're running the module
++	 * from physically mapped address space */
++	if (me->arch.phys_plt_offset == 0) {
++		__module_free(me->arch.phys_plt_tbl);
++		me->arch.phys_plt_tbl = NULL;
++	}
++	if (me->arch.virt_plt_offset == 0) {
++		__module_free(me->arch.virt_plt_tbl);
++		me->arch.virt_plt_tbl = NULL;
++	}
++
+ 	return 0;
+ }
+ 
+ void module_arch_cleanup(struct module *mod)
+ {
++	if (mod->arch.phys_plt_tbl) {
++		__module_free(mod->arch.phys_plt_tbl);
++		mod->arch.phys_plt_tbl = NULL;
++	}
++	if (mod->arch.virt_plt_tbl) {
++		__module_free(mod->arch.virt_plt_tbl);
++		mod->arch.virt_plt_tbl = NULL;
++	}
++
+ 	spin_lock_irq(&dbe_lock);
+ 	list_del(&mod->arch.dbe_list);
+ 	spin_unlock_irq(&dbe_lock);
diff --git a/target/linux/generic/patches-2.6.32/028-module_exports.patch b/target/linux/generic/patches-2.6.32/028-module_exports.patch
new file mode 100644
index 0000000000..5d86333c73
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/028-module_exports.patch
@@ -0,0 +1,119 @@
+--- a/include/asm-generic/vmlinux.lds.h
++++ b/include/asm-generic/vmlinux.lds.h
+@@ -52,6 +52,27 @@
+ #define LOAD_OFFSET 0
+ #endif
+ 
++#ifndef SYMTAB_KEEP_STR
++#define SYMTAB_KEEP_STR *(__ksymtab_strings.*)
++#define SYMTAB_DISCARD_STR
++#else
++#define SYMTAB_DISCARD_STR *(__ksymtab_strings.*)
++#endif
++
++#ifndef SYMTAB_KEEP
++#define SYMTAB_KEEP *(__ksymtab.*)
++#define SYMTAB_DISCARD
++#else
++#define SYMTAB_DISCARD *(__ksymtab.*)
++#endif
++
++#ifndef SYMTAB_KEEP_GPL
++#define SYMTAB_KEEP_GPL *(__ksymtab_gpl.*)
++#define SYMTAB_DISCARD_GPL
++#else
++#define SYMTAB_DISCARD_GPL *(__ksymtab_gpl.*)
++#endif
++
+ #ifndef VMLINUX_SYMBOL
+ #define VMLINUX_SYMBOL(_sym_) _sym_
+ #endif
+@@ -254,35 +275,35 @@
+ 	/* Kernel symbol table: Normal symbols */			\
+ 	__ksymtab         : AT(ADDR(__ksymtab) - LOAD_OFFSET) {		\
+ 		VMLINUX_SYMBOL(__start___ksymtab) = .;			\
+-		*(__ksymtab)						\
++		SYMTAB_KEEP						\
+ 		VMLINUX_SYMBOL(__stop___ksymtab) = .;			\
+ 	}								\
+ 									\
+ 	/* Kernel symbol table: GPL-only symbols */			\
+ 	__ksymtab_gpl     : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) {	\
+ 		VMLINUX_SYMBOL(__start___ksymtab_gpl) = .;		\
+-		*(__ksymtab_gpl)					\
++		SYMTAB_KEEP_GPL						\
+ 		VMLINUX_SYMBOL(__stop___ksymtab_gpl) = .;		\
+ 	}								\
+ 									\
+ 	/* Kernel symbol table: Normal unused symbols */		\
+ 	__ksymtab_unused  : AT(ADDR(__ksymtab_unused) - LOAD_OFFSET) {	\
+ 		VMLINUX_SYMBOL(__start___ksymtab_unused) = .;		\
+-		*(__ksymtab_unused)					\
++		*(__ksymtab_unused.*)					\
+ 		VMLINUX_SYMBOL(__stop___ksymtab_unused) = .;		\
+ 	}								\
+ 									\
+ 	/* Kernel symbol table: GPL-only unused symbols */		\
+ 	__ksymtab_unused_gpl : AT(ADDR(__ksymtab_unused_gpl) - LOAD_OFFSET) { \
+ 		VMLINUX_SYMBOL(__start___ksymtab_unused_gpl) = .;	\
+-		*(__ksymtab_unused_gpl)					\
++		*(__ksymtab_unused_gpl.*)				\
+ 		VMLINUX_SYMBOL(__stop___ksymtab_unused_gpl) = .;	\
+ 	}								\
+ 									\
+ 	/* Kernel symbol table: GPL-future-only symbols */		\
+ 	__ksymtab_gpl_future : AT(ADDR(__ksymtab_gpl_future) - LOAD_OFFSET) { \
+ 		VMLINUX_SYMBOL(__start___ksymtab_gpl_future) = .;	\
+-		*(__ksymtab_gpl_future)					\
++		*(__ksymtab_gpl_future.*)				\
+ 		VMLINUX_SYMBOL(__stop___ksymtab_gpl_future) = .;	\
+ 	}								\
+ 									\
+@@ -323,7 +344,7 @@
+ 									\
+ 	/* Kernel symbol table: strings */				\
+         __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) {	\
+-		*(__ksymtab_strings)					\
++		SYMTAB_KEEP_STR						\
+ 	}								\
+ 									\
+ 	/* __*init sections */						\
+@@ -638,6 +659,9 @@
+ 	EXIT_TEXT							\
+ 	EXIT_DATA							\
+ 	EXIT_CALL							\
++	SYMTAB_DISCARD							\
++	SYMTAB_DISCARD_GPL						\
++	SYMTAB_DISCARD_STR						\
+ 	*(.discard)							\
+ 	}
+ 
+--- a/include/linux/module.h
++++ b/include/linux/module.h
+@@ -192,16 +192,24 @@ void *__symbol_get_gpl(const char *symbo
+ #define __CRC_SYMBOL(sym, sec)
+ #endif
+ 
++#ifdef MODULE
++#define __EXPORT_SUFFIX(sym)
++#else
++#define __EXPORT_SUFFIX(sym) "." #sym
++#endif
++
+ /* For every exported symbol, place a struct in the __ksymtab section */
+ #define __EXPORT_SYMBOL(sym, sec)				\
+ 	extern typeof(sym) sym;					\
+ 	__CRC_SYMBOL(sym, sec)					\
+ 	static const char __kstrtab_##sym[]			\
+-	__attribute__((section("__ksymtab_strings"), aligned(1))) \
++	__attribute__((section("__ksymtab_strings"		\
++	  __EXPORT_SUFFIX(sym)), aligned(1)))			\
+ 	= MODULE_SYMBOL_PREFIX #sym;                    	\
+ 	static const struct kernel_symbol __ksymtab_##sym	\
+ 	__used							\
+-	__attribute__((section("__ksymtab" sec), unused))	\
++	__attribute__((section("__ksymtab" sec			\
++	  __EXPORT_SUFFIX(sym)), unused))			\
+ 	= { (unsigned long)&sym, __kstrtab_##sym }
+ 
+ #define EXPORT_SYMBOL(sym)					\
diff --git a/target/linux/generic/patches-2.6.32/029-arm_module_unresolved_weak_sym.patch b/target/linux/generic/patches-2.6.32/029-arm_module_unresolved_weak_sym.patch
new file mode 100644
index 0000000000..8a3b2e23cb
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/029-arm_module_unresolved_weak_sym.patch
@@ -0,0 +1,13 @@
+--- a/arch/arm/kernel/module.c
++++ b/arch/arm/kernel/module.c
+@@ -121,6 +121,10 @@ apply_relocate(Elf32_Shdr *sechdrs, cons
+ 			return -ENOEXEC;
+ 		}
+ 
++		if ((IS_ERR_VALUE(sym->st_value) || !sym->st_value) &&
++		    ELF_ST_BIND(sym->st_info) == STB_WEAK)
++			continue;
++
+ 		loc = dstsec->sh_addr + rel->r_offset;
+ 
+ 		switch (ELF32_R_TYPE(rel->r_info)) {
diff --git a/target/linux/generic/patches-2.6.32/030-pci_disable_common_quirks.patch b/target/linux/generic/patches-2.6.32/030-pci_disable_common_quirks.patch
new file mode 100644
index 0000000000..cd08ea14f7
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/030-pci_disable_common_quirks.patch
@@ -0,0 +1,43 @@
+--- a/drivers/pci/Kconfig
++++ b/drivers/pci/Kconfig
+@@ -51,6 +51,12 @@ config PCI_STUB
+ 
+ 	  When in doubt, say N.
+ 
++config PCI_DISABLE_COMMON_QUIRKS
++	bool "PCI disable common quirks"
++	depends on PCI
++	help
++	  If you don't know what to do here, say N.
++
+ config HT_IRQ
+ 	bool "Interrupts on hypertransport devices"
+ 	default y
+--- a/drivers/pci/quirks.c
++++ b/drivers/pci/quirks.c
+@@ -96,6 +96,7 @@ static void __devinit quirk_resource_ali
+ }
+ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_resource_alignment);
+ 
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
+ /* The Mellanox Tavor device gives false positive parity errors
+  * Mark this device with a broken_parity_status, to allow
+  * PCI scanning code to "skip" this now blacklisted device.
+@@ -1884,7 +1885,9 @@ static void __devinit fixup_rev1_53c810(
+ 	}
+ }
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
++#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
+ 
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
+ /* Enable 1k I/O space granularity on the Intel P64H2 */
+ static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
+ {
+@@ -2516,6 +2519,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1518, quirk_i82576_sriov);
+ 
+ #endif	/* CONFIG_PCI_IOV */
++#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
+ 
+ static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
+ 			  struct pci_fixup *end)
diff --git a/target/linux/generic/patches-2.6.32/031-ppc_gcc_build_fix.patch b/target/linux/generic/patches-2.6.32/031-ppc_gcc_build_fix.patch
new file mode 100644
index 0000000000..6945ebf4c9
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/031-ppc_gcc_build_fix.patch
@@ -0,0 +1,226 @@
+GCC 4.4.x looks to be adding support for generating out-of-line register
+saves/restores based on:
+
+http://gcc.gnu.org/ml/gcc-patches/2008-04/msg01678.html
+
+This breaks the kernel build as we'd have to link with libgcc to get the
+implementation of the register save/restores.
+
+To workaround this issue, we just stole the save/restore code from gcc
+and simplified it down for our needs (integer only).  We only do this if
+PPC32 as gcc makes believe the linker on ppc64 will deal with this and
+only if CONFIG_CC_OPTIMIZE_FOR_SIZE is set (thus -Os).
+
+Signed-off-by: Kumar Gala <[EMAIL PROTECTED]>
+---
+
+If someone using cutting edge toolchains for ppc64 could test and make
+sure if we enable CONFIG_CC_OPTIMIZE_FOR_SIZE things work that would be
+nice.
+
+- k
+
+ arch/powerpc/kernel/misc_32.S   |   77 +++++++++++++++++++++++++++
+ arch/powerpc/kernel/ppc_ksyms.c |  111 +++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 188 insertions(+), 0 deletions(-)
+
+--- a/arch/powerpc/kernel/misc_32.S
++++ b/arch/powerpc/kernel/misc_32.S
+@@ -820,3 +820,80 @@ relocate_new_kernel_end:
+ relocate_new_kernel_size:
+ 	.long relocate_new_kernel_end - relocate_new_kernel
+ #endif
++
++#if defined(CONFIG_PPC32) && defined(CONFIG_CC_OPTIMIZE_FOR_SIZE)
++/* Routines for saving integer registers, called by the compiler.  */
++/* Called with r11 pointing to the stack header word of the caller of the */
++/* function, just beyond the end of the integer save area.  */
++
++_GLOBAL(_savegpr_14)   stw     14,-72(11)      /* save gp registers */
++_GLOBAL(_savegpr_15)   stw     15,-68(11)
++_GLOBAL(_savegpr_16)   stw     16,-64(11)
++_GLOBAL(_savegpr_17)   stw     17,-60(11)
++_GLOBAL(_savegpr_18)   stw     18,-56(11)
++_GLOBAL(_savegpr_19)   stw     19,-52(11)
++_GLOBAL(_savegpr_20)   stw     20,-48(11)
++_GLOBAL(_savegpr_21)   stw     21,-44(11)
++_GLOBAL(_savegpr_22)   stw     22,-40(11)
++_GLOBAL(_savegpr_23)   stw     23,-36(11)
++_GLOBAL(_savegpr_24)   stw     24,-32(11)
++_GLOBAL(_savegpr_25)   stw     25,-28(11)
++_GLOBAL(_savegpr_26)   stw     26,-24(11)
++_GLOBAL(_savegpr_27)   stw     27,-20(11)
++_GLOBAL(_savegpr_28)   stw     28,-16(11)
++_GLOBAL(_savegpr_29)   stw     29,-12(11)
++_GLOBAL(_savegpr_30)   stw     30,-8(11)
++_GLOBAL(_savegpr_31)   stw     31,-4(11)
++                       blr
++
++/* Routines for restoring integer registers, called by the compiler.  */
++/* Called with r11 pointing to the stack header word of the caller of the */
++/* function, just beyond the end of the integer restore area.  */
++
++_GLOBAL(_restgpr_14)   lwz     14,-72(11)      /* restore gp registers */
++_GLOBAL(_restgpr_15)   lwz     15,-68(11)
++_GLOBAL(_restgpr_16)   lwz     16,-64(11)
++_GLOBAL(_restgpr_17)   lwz     17,-60(11)
++_GLOBAL(_restgpr_18)   lwz     18,-56(11)
++_GLOBAL(_restgpr_19)   lwz     19,-52(11)
++_GLOBAL(_restgpr_20)   lwz     20,-48(11)
++_GLOBAL(_restgpr_21)   lwz     21,-44(11)
++_GLOBAL(_restgpr_22)   lwz     22,-40(11)
++_GLOBAL(_restgpr_23)   lwz     23,-36(11)
++_GLOBAL(_restgpr_24)   lwz     24,-32(11)
++_GLOBAL(_restgpr_25)   lwz     25,-28(11)
++_GLOBAL(_restgpr_26)   lwz     26,-24(11)
++_GLOBAL(_restgpr_27)   lwz     27,-20(11)
++_GLOBAL(_restgpr_28)   lwz     28,-16(11)
++_GLOBAL(_restgpr_29)   lwz     29,-12(11)
++_GLOBAL(_restgpr_30)   lwz     30,-8(11)
++_GLOBAL(_restgpr_31)   lwz     31,-4(11)
++                       blr
++
++/* Routines for restoring integer registers, called by the compiler.  */
++/* Called with r11 pointing to the stack header word of the caller of the */
++/* function, just beyond the end of the integer restore area.  */
++
++_GLOBAL(_restgpr_14_x) lwz     14,-72(11)      /* restore gp registers */
++_GLOBAL(_restgpr_15_x) lwz     15,-68(11)
++_GLOBAL(_restgpr_16_x) lwz     16,-64(11)
++_GLOBAL(_restgpr_17_x) lwz     17,-60(11)
++_GLOBAL(_restgpr_18_x) lwz     18,-56(11)
++_GLOBAL(_restgpr_19_x) lwz     19,-52(11)
++_GLOBAL(_restgpr_20_x) lwz     20,-48(11)
++_GLOBAL(_restgpr_21_x) lwz     21,-44(11)
++_GLOBAL(_restgpr_22_x) lwz     22,-40(11)
++_GLOBAL(_restgpr_23_x) lwz     23,-36(11)
++_GLOBAL(_restgpr_24_x) lwz     24,-32(11)
++_GLOBAL(_restgpr_25_x) lwz     25,-28(11)
++_GLOBAL(_restgpr_26_x) lwz     26,-24(11)
++_GLOBAL(_restgpr_27_x) lwz     27,-20(11)
++_GLOBAL(_restgpr_28_x) lwz     28,-16(11)
++_GLOBAL(_restgpr_29_x) lwz     29,-12(11)
++_GLOBAL(_restgpr_30_x) lwz     30,-8(11)
++_GLOBAL(_restgpr_31_x) lwz     0,4(11)
++                       lwz     31,-4(11)
++                       mtlr    0
++                       mr      1,11
++                       blr
++#endif
+--- a/arch/powerpc/kernel/ppc_ksyms.c
++++ b/arch/powerpc/kernel/ppc_ksyms.c
+@@ -188,3 +188,114 @@ EXPORT_SYMBOL(__mtdcr);
+ EXPORT_SYMBOL(__mfdcr);
+ #endif
+ EXPORT_SYMBOL(empty_zero_page);
++
++#if defined(CONFIG_PPC32) && defined(CONFIG_CC_OPTIMIZE_FOR_SIZE)
++void _savegpr_14(void);
++void _savegpr_15(void);
++void _savegpr_16(void);
++void _savegpr_17(void);
++void _savegpr_18(void);
++void _savegpr_19(void);
++void _savegpr_20(void);
++void _savegpr_21(void);
++void _savegpr_22(void);
++void _savegpr_23(void);
++void _savegpr_24(void);
++void _savegpr_25(void);
++void _savegpr_26(void);
++void _savegpr_27(void);
++void _savegpr_28(void);
++void _savegpr_29(void);
++void _savegpr_30(void);
++void _savegpr_31(void);
++void _restgpr_14(void);
++void _restgpr_15(void);
++void _restgpr_16(void);
++void _restgpr_17(void);
++void _restgpr_18(void);
++void _restgpr_19(void);
++void _restgpr_20(void);
++void _restgpr_21(void);
++void _restgpr_22(void);
++void _restgpr_23(void);
++void _restgpr_24(void);
++void _restgpr_25(void);
++void _restgpr_26(void);
++void _restgpr_27(void);
++void _restgpr_28(void);
++void _restgpr_29(void);
++void _restgpr_30(void);
++void _restgpr_31(void);
++void _restgpr_14_x(void);
++void _restgpr_15_x(void);
++void _restgpr_16_x(void);
++void _restgpr_17_x(void);
++void _restgpr_18_x(void);
++void _restgpr_19_x(void);
++void _restgpr_20_x(void);
++void _restgpr_21_x(void);
++void _restgpr_22_x(void);
++void _restgpr_23_x(void);
++void _restgpr_24_x(void);
++void _restgpr_25_x(void);
++void _restgpr_26_x(void);
++void _restgpr_27_x(void);
++void _restgpr_28_x(void);
++void _restgpr_29_x(void);
++void _restgpr_30_x(void);
++void _restgpr_31_x(void);
++EXPORT_SYMBOL(_savegpr_14);
++EXPORT_SYMBOL(_savegpr_15);
++EXPORT_SYMBOL(_savegpr_16);
++EXPORT_SYMBOL(_savegpr_17);
++EXPORT_SYMBOL(_savegpr_18);
++EXPORT_SYMBOL(_savegpr_19);
++EXPORT_SYMBOL(_savegpr_20);
++EXPORT_SYMBOL(_savegpr_21);
++EXPORT_SYMBOL(_savegpr_22);
++EXPORT_SYMBOL(_savegpr_23);
++EXPORT_SYMBOL(_savegpr_24);
++EXPORT_SYMBOL(_savegpr_25);
++EXPORT_SYMBOL(_savegpr_26);
++EXPORT_SYMBOL(_savegpr_27);
++EXPORT_SYMBOL(_savegpr_28);
++EXPORT_SYMBOL(_savegpr_29);
++EXPORT_SYMBOL(_savegpr_30);
++EXPORT_SYMBOL(_savegpr_31);
++EXPORT_SYMBOL(_restgpr_14);
++EXPORT_SYMBOL(_restgpr_15);
++EXPORT_SYMBOL(_restgpr_16);
++EXPORT_SYMBOL(_restgpr_17);
++EXPORT_SYMBOL(_restgpr_18);
++EXPORT_SYMBOL(_restgpr_19);
++EXPORT_SYMBOL(_restgpr_20);
++EXPORT_SYMBOL(_restgpr_21);
++EXPORT_SYMBOL(_restgpr_22);
++EXPORT_SYMBOL(_restgpr_23);
++EXPORT_SYMBOL(_restgpr_24);
++EXPORT_SYMBOL(_restgpr_25);
++EXPORT_SYMBOL(_restgpr_26);
++EXPORT_SYMBOL(_restgpr_27);
++EXPORT_SYMBOL(_restgpr_28);
++EXPORT_SYMBOL(_restgpr_29);
++EXPORT_SYMBOL(_restgpr_30);
++EXPORT_SYMBOL(_restgpr_31);
++EXPORT_SYMBOL(_restgpr_14_x);
++EXPORT_SYMBOL(_restgpr_15_x);
++EXPORT_SYMBOL(_restgpr_16_x);
++EXPORT_SYMBOL(_restgpr_17_x);
++EXPORT_SYMBOL(_restgpr_18_x);
++EXPORT_SYMBOL(_restgpr_19_x);
++EXPORT_SYMBOL(_restgpr_20_x);
++EXPORT_SYMBOL(_restgpr_21_x);
++EXPORT_SYMBOL(_restgpr_22_x);
++EXPORT_SYMBOL(_restgpr_23_x);
++EXPORT_SYMBOL(_restgpr_24_x);
++EXPORT_SYMBOL(_restgpr_25_x);
++EXPORT_SYMBOL(_restgpr_26_x);
++EXPORT_SYMBOL(_restgpr_27_x);
++EXPORT_SYMBOL(_restgpr_28_x);
++EXPORT_SYMBOL(_restgpr_29_x);
++EXPORT_SYMBOL(_restgpr_30_x);
++EXPORT_SYMBOL(_restgpr_31_x);
++#endif /* CONFIG_PPC32 && CONFIG_CC_OPTIMIZE_FOR_SIZE */
diff --git a/target/linux/generic/patches-2.6.32/050-lzo_compressed_kernels.patch b/target/linux/generic/patches-2.6.32/050-lzo_compressed_kernels.patch
new file mode 100644
index 0000000000..733d1756f6
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/050-lzo_compressed_kernels.patch
@@ -0,0 +1,309 @@
+--- /dev/null
++++ b/include/linux/decompress/unlzo.h
+@@ -0,0 +1,10 @@
++#ifndef DECOMPRESS_UNLZO_H
++#define DECOMPRESS_UNLZO_H
++
++int unlzo(unsigned char *inbuf, int len,
++	int(*fill)(void*, unsigned int),
++	int(*flush)(void*, unsigned int),
++	unsigned char *output,
++	int *pos,
++	void(*error)(char *x));
++#endif
+--- a/init/Kconfig
++++ b/init/Kconfig
+@@ -115,10 +115,13 @@ config HAVE_KERNEL_BZIP2
+ config HAVE_KERNEL_LZMA
+ 	bool
+ 
++config HAVE_KERNEL_LZO
++	bool
++
+ choice
+ 	prompt "Kernel compression mode"
+ 	default KERNEL_GZIP
+-	depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA
++	depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA || HAVE_KERNEL_LZO
+ 	help
+ 	  The linux kernel is a kind of self-extracting executable.
+ 	  Several compression algorithms are available, which differ
+@@ -141,9 +144,8 @@ config KERNEL_GZIP
+ 	bool "Gzip"
+ 	depends on HAVE_KERNEL_GZIP
+ 	help
+-	  The old and tried gzip compression. Its compression ratio is
+-	  the poorest among the 3 choices; however its speed (both
+-	  compression and decompression) is the fastest.
++	  The old and tried gzip compression. It provides a good balance
++	  between compression ratio and decompression speed.
+ 
+ config KERNEL_BZIP2
+ 	bool "Bzip2"
+@@ -164,6 +166,14 @@ config KERNEL_LZMA
+ 	  two. Compression is slowest.	The kernel size is about 33%
+ 	  smaller with LZMA in comparison to gzip.
+ 
++config KERNEL_LZO
++	bool "LZO"
++	depends on HAVE_KERNEL_LZO
++	help
++	  Its compression ratio is the poorest among the 4. The kernel
++	  size is about about 10% bigger than gzip; however its speed
++	  (both compression and decompression) is the fastest.
++
+ endchoice
+ 
+ config SWAP
+--- /dev/null
++++ b/lib/decompress_unlzo.c
+@@ -0,0 +1,208 @@
++/*
++ * LZO decompressor for the Linux kernel. Code borrowed from the lzo
++ * implementation by Markus Franz Xaver Johannes Oberhumer.
++ *
++ * Linux kernel adaptation:
++ * Copyright (C) 2009
++ * Albin Tonnerre, Free Electrons <albin.tonnerre@free-electrons.com>
++ *
++ * Original code:
++ * Copyright (C) 1996-2005 Markus Franz Xaver Johannes Oberhumer
++ * All Rights Reserved.
++ *
++ * lzop and the LZO library are free software; you can redistribute them
++ * and/or modify them under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; see the file COPYING.
++ * If not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * Markus F.X.J. Oberhumer
++ * <markus@oberhumer.com>
++ * http://www.oberhumer.com/opensource/lzop/
++ */
++
++#ifdef STATIC
++#include "lzo/lzo1x_decompress.c"
++#else
++#include <linux/slab.h>
++#include <linux/decompress/unlzo.h>
++#endif
++
++#include <linux/types.h>
++#include <linux/lzo.h>
++#include <linux/decompress/mm.h>
++
++#include <linux/compiler.h>
++#include <asm/unaligned.h>
++
++static const unsigned char lzop_magic[] =
++	{ 0x89, 0x4c, 0x5a, 0x4f, 0x00, 0x0d, 0x0a, 0x1a, 0x0a };
++
++#define LZO_BLOCK_SIZE        (256*1024l)
++#define HEADER_HAS_FILTER      0x00000800L
++
++STATIC inline int INIT parse_header(u8 *input, u8 *skip)
++{
++	int l;
++	u8 *parse = input;
++	u8 level = 0;
++	u16 version;
++
++	/* read magic: 9 first bits */
++	for (l = 0; l < 9; l++) {
++		if (*parse++ != lzop_magic[l])
++			return 0;
++	}
++	/* get version (2bytes), skip library version (2),
++	 * 'need to be extracted' version (2) and
++	 * method (1) */
++	version = get_unaligned_be16(parse);
++	parse += 7;
++	if (version >= 0x0940)
++		level = *parse++;
++	if (get_unaligned_be32(parse) & HEADER_HAS_FILTER)
++		parse += 8; /* flags + filter info */
++	else
++		parse += 4; /* flags */
++
++	/* skip mode and mtime_low */
++	parse += 8;
++	if (version >= 0x0940)
++		parse += 4;	/* skip mtime_high */
++
++	l = *parse++;
++	/* don't care about the file name, and skip checksum */
++	parse += l + 4;
++
++	*skip = parse - input;
++	return 1;
++}
++
++STATIC inline int INIT unlzo(u8 *input, int in_len,
++				int (*fill) (void *, unsigned int),
++				int (*flush) (void *, unsigned int),
++				u8 *output, int *posp,
++				void (*error_fn) (char *x))
++{
++	u8 skip = 0, r = 0;
++	u32 src_len, dst_len;
++	size_t tmp;
++	u8 *in_buf, *in_buf_save, *out_buf;
++	int obytes_processed = 0;
++
++	set_error_fn(error_fn);
++
++	if (output)
++		out_buf = output;
++	else if (!flush) {
++		error("NULL output pointer and no flush function provided");
++		goto exit;
++	} else {
++		out_buf = malloc(LZO_BLOCK_SIZE);
++		if (!out_buf) {
++			error("Could not allocate output buffer");
++			goto exit;
++		}
++	}
++
++	if (input && fill) {
++		error("Both input pointer and fill function provided, don't know what to do");
++		goto exit_1;
++	} else if (input)
++		in_buf = input;
++	else if (!fill || !posp) {
++		error("NULL input pointer and missing position pointer or fill function");
++		goto exit_1;
++	} else {
++		in_buf = malloc(lzo1x_worst_compress(LZO_BLOCK_SIZE));
++		if (!in_buf) {
++			error("Could not allocate input buffer");
++			goto exit_1;
++		}
++	}
++	in_buf_save = in_buf;
++
++	if (posp)
++		*posp = 0;
++
++	if (fill)
++		fill(in_buf, lzo1x_worst_compress(LZO_BLOCK_SIZE));
++
++	if (!parse_header(input, &skip)) {
++		error("invalid header");
++		goto exit_2;
++	}
++	in_buf += skip;
++
++	if (posp)
++		*posp = skip;
++
++	for (;;) {
++		/* read uncompressed block size */
++		dst_len = get_unaligned_be32(in_buf);
++		in_buf += 4;
++
++		/* exit if last block */
++		if (dst_len == 0) {
++			if (posp)
++				*posp += 4;
++			break;
++		}
++
++		if (dst_len > LZO_BLOCK_SIZE) {
++			error("dest len longer than block size");
++			goto exit_2;
++		}
++
++		/* read compressed block size, and skip block checksum info */
++		src_len = get_unaligned_be32(in_buf);
++		in_buf += 8;
++
++		if (src_len <= 0 || src_len > dst_len) {
++			error("file corrupted");
++			goto exit_2;
++		}
++
++		/* decompress */
++		tmp = dst_len;
++		r = lzo1x_decompress_safe((u8 *) in_buf, src_len, out_buf, &tmp);
++
++		if (r != LZO_E_OK || dst_len != tmp) {
++			error("Compressed data violation");
++			goto exit_2;
++		}
++
++		obytes_processed += dst_len;
++		if (flush)
++			flush(out_buf, dst_len);
++		if (output)
++			out_buf += dst_len;
++		if (posp)
++			*posp += src_len + 12;
++		if (fill) {
++			in_buf = in_buf_save;
++			fill(in_buf, lzo1x_worst_compress(LZO_BLOCK_SIZE));
++		} else
++			in_buf += src_len;
++	}
++
++exit_2:
++	if (!input)
++		free(in_buf);
++exit_1:
++	if (!output)
++		free(out_buf);
++exit:
++	return obytes_processed;
++}
++
++#define decompress unlzo
+--- a/lib/lzo/lzo1x_decompress.c
++++ b/lib/lzo/lzo1x_decompress.c
+@@ -11,11 +11,13 @@
+  *  Richard Purdie <rpurdie@openedhand.com>
+  */
+ 
++#ifndef STATIC
+ #include <linux/module.h>
+ #include <linux/kernel.h>
+-#include <linux/lzo.h>
+-#include <asm/byteorder.h>
++#endif
++
+ #include <asm/unaligned.h>
++#include <linux/lzo.h>
+ #include "lzodefs.h"
+ 
+ #define HAVE_IP(x, ip_end, ip) ((size_t)(ip_end - ip) < (x))
+@@ -244,9 +246,10 @@ lookbehind_overrun:
+ 	*out_len = op - out;
+ 	return LZO_E_LOOKBEHIND_OVERRUN;
+ }
+-
++#ifndef STATIC
+ EXPORT_SYMBOL_GPL(lzo1x_decompress_safe);
+ 
+ MODULE_LICENSE("GPL");
+ MODULE_DESCRIPTION("LZO1X Decompressor");
+ 
++#endif
+--- a/scripts/Makefile.lib
++++ b/scripts/Makefile.lib
+@@ -230,3 +230,8 @@ quiet_cmd_lzma = LZMA    $@
+ cmd_lzma = (cat $(filter-out FORCE,$^) | \
+ 	lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ 	(rm -f $@ ; false)
++
++quiet_cmd_lzo = LZO    $@
++cmd_lzo = (cat $(filter-out FORCE,$^) | \
++	lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
++	(rm -f $@ ; false)
diff --git a/target/linux/generic/patches-2.6.32/051-lzo_compressed_kernel_for_arm.patch b/target/linux/generic/patches-2.6.32/051-lzo_compressed_kernel_for_arm.patch
new file mode 100644
index 0000000000..49512bb41d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/051-lzo_compressed_kernel_for_arm.patch
@@ -0,0 +1,283 @@
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -18,6 +18,8 @@ config ARM
+ 	select HAVE_KRETPROBES if (HAVE_KPROBES)
+ 	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
+ 	select HAVE_GENERIC_DMA_COHERENT
++	select HAVE_KERNEL_GZIP
++	select HAVE_KERNEL_LZO
+ 	help
+ 	  The ARM series is a line of low-power-consumption RISC chip designs
+ 	  licensed by ARM Ltd and targeted at embedded applications and
+--- a/arch/arm/boot/compressed/Makefile
++++ b/arch/arm/boot/compressed/Makefile
+@@ -63,8 +63,12 @@ endif
+ 
+ SEDFLAGS	= s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
+ 
+-targets       := vmlinux vmlinux.lds piggy.gz piggy.o font.o font.c \
+-		 head.o misc.o $(OBJS)
++suffix_$(CONFIG_KERNEL_GZIP) = gzip
++suffix_$(CONFIG_KERNEL_LZO)  = lzo
++
++targets       := vmlinux vmlinux.lds \
++		 piggy.$(suffix_y) piggy.$(suffix_y).o \
++		 font.o font.c head.o misc.o $(OBJS)
+ 
+ ifeq ($(CONFIG_FUNCTION_TRACER),y)
+ ORIG_CFLAGS := $(KBUILD_CFLAGS)
+@@ -87,22 +91,31 @@ endif
+ ifneq ($(PARAMS_PHYS),)
+ LDFLAGS_vmlinux += --defsym params_phys=$(PARAMS_PHYS)
+ endif
+-LDFLAGS_vmlinux += -p --no-undefined -X \
+-	$(shell $(CC) $(KBUILD_CFLAGS) --print-libgcc-file-name) -T
++# ?
++LDFLAGS_vmlinux += -p
++# Report unresolved symbol references
++LDFLAGS_vmlinux += --no-undefined
++# Delete all temporary local symbols
++LDFLAGS_vmlinux += -X
++# Next argument is a linker script
++LDFLAGS_vmlinux += -T
++
++# For __aeabi_uidivmod
++lib1funcs = $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.o
+ 
+ # Don't allow any static data in misc.o, which
+ # would otherwise mess up our GOT table
+ CFLAGS_misc.o := -Dstatic=
+ 
+-$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.o \
+-	 	$(addprefix $(obj)/, $(OBJS)) FORCE
++$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
++	 	$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) FORCE
+ 	$(call if_changed,ld)
+ 	@:
+ 
+-$(obj)/piggy.gz: $(obj)/../Image FORCE
+-	$(call if_changed,gzip)
++$(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE
++	$(call if_changed,$(suffix_y))
+ 
+-$(obj)/piggy.o:  $(obj)/piggy.gz FORCE
++$(obj)/piggy.$(suffix_y).o:  $(obj)/piggy.$(suffix_y) FORCE
+ 
+ CFLAGS_font.o := -Dstatic=
+ 
+--- a/arch/arm/boot/compressed/misc.c
++++ b/arch/arm/boot/compressed/misc.c
+@@ -18,10 +18,15 @@
+ 
+ unsigned int __machine_arch_type;
+ 
++#define _LINUX_STRING_H_
++
+ #include <linux/compiler.h>	/* for inline */
+ #include <linux/types.h>	/* for size_t */
+ #include <linux/stddef.h>	/* for NULL */
+ #include <asm/string.h>
++#include <linux/linkage.h>
++
++#include <asm/unaligned.h>
+ 
+ #ifdef STANDALONE_DEBUG
+ #define putstr printf
+@@ -188,34 +193,8 @@ static inline __ptr_t memcpy(__ptr_t __d
+ /*
+  * gzip delarations
+  */
+-#define OF(args)  args
+ #define STATIC static
+ 
+-typedef unsigned char  uch;
+-typedef unsigned short ush;
+-typedef unsigned long  ulg;
+-
+-#define WSIZE 0x8000		/* Window size must be at least 32k, */
+-				/* and a power of two */
+-
+-static uch *inbuf;		/* input buffer */
+-static uch window[WSIZE];	/* Sliding window buffer */
+-
+-static unsigned insize;		/* valid bytes in inbuf */
+-static unsigned inptr;		/* index of next byte to be processed in inbuf */
+-static unsigned outcnt;		/* bytes in output buffer */
+-
+-/* gzip flag byte */
+-#define ASCII_FLAG   0x01 /* bit 0 set: file probably ascii text */
+-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
+-#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
+-#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
+-#define COMMENT      0x10 /* bit 4 set: file comment present */
+-#define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
+-#define RESERVED     0xC0 /* bit 6,7:   reserved */
+-
+-#define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf())
+-
+ /* Diagnostic functions */
+ #ifdef DEBUG
+ #  define Assert(cond,msg) {if(!(cond)) error(msg);}
+@@ -233,24 +212,20 @@ static unsigned outcnt;		/* bytes in out
+ #  define Tracecv(c,x)
+ #endif
+ 
+-static int  fill_inbuf(void);
+-static void flush_window(void);
+ static void error(char *m);
+ 
+ extern char input_data[];
+ extern char input_data_end[];
+ 
+-static uch *output_data;
+-static ulg output_ptr;
+-static ulg bytes_out;
++static unsigned char *output_data;
++static unsigned long output_ptr;
+ 
+ static void error(char *m);
+ 
+ static void putstr(const char *);
+ 
+-extern int end;
+-static ulg free_mem_ptr;
+-static ulg free_mem_end_ptr;
++static unsigned long free_mem_ptr;
++static unsigned long free_mem_end_ptr;
+ 
+ #ifdef STANDALONE_DEBUG
+ #define NO_INFLATE_MALLOC
+@@ -258,46 +233,13 @@ static ulg free_mem_end_ptr;
+ 
+ #define ARCH_HAS_DECOMP_WDOG
+ 
+-#include "../../../../lib/inflate.c"
+-
+-/* ===========================================================================
+- * Fill the input buffer. This is called only when the buffer is empty
+- * and at least one byte is really needed.
+- */
+-int fill_inbuf(void)
+-{
+-	if (insize != 0)
+-		error("ran out of input data");
+-
+-	inbuf = input_data;
+-	insize = &input_data_end[0] - &input_data[0];
+-
+-	inptr = 1;
+-	return inbuf[0];
+-}
++#ifdef CONFIG_KERNEL_GZIP
++#include "../../../../lib/decompress_inflate.c"
++#endif
+ 
+-/* ===========================================================================
+- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
+- * (Used for the decompressed data only.)
+- */
+-void flush_window(void)
+-{
+-	ulg c = crc;
+-	unsigned n;
+-	uch *in, *out, ch;
+-
+-	in = window;
+-	out = &output_data[output_ptr];
+-	for (n = 0; n < outcnt; n++) {
+-		ch = *out++ = *in++;
+-		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+-	}
+-	crc = c;
+-	bytes_out += (ulg)outcnt;
+-	output_ptr += (ulg)outcnt;
+-	outcnt = 0;
+-	putstr(".");
+-}
++#ifdef CONFIG_KERNEL_LZO
++#include "../../../../lib/decompress_unlzo.c"
++#endif
+ 
+ #ifndef arch_error
+ #define arch_error(x)
+@@ -314,22 +256,33 @@ static void error(char *x)
+ 	while(1);	/* Halt */
+ }
+ 
++asmlinkage void __div0(void)
++{
++	error("Attempting division by 0!");
++}
++
+ #ifndef STANDALONE_DEBUG
+ 
+-ulg
+-decompress_kernel(ulg output_start, ulg free_mem_ptr_p, ulg free_mem_ptr_end_p,
+-		  int arch_id)
++unsigned long
++decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
++		unsigned long free_mem_ptr_end_p,
++		int arch_id)
+ {
+-	output_data		= (uch *)output_start;	/* Points to kernel start */
++	unsigned char *tmp;
++
++	output_data		= (unsigned char *)output_start;
+ 	free_mem_ptr		= free_mem_ptr_p;
+ 	free_mem_end_ptr	= free_mem_ptr_end_p;
+ 	__machine_arch_type	= arch_id;
+ 
+ 	arch_decomp_setup();
+ 
+-	makecrc();
++	tmp = (unsigned char *) (((unsigned long)input_data_end) - 4);
++	output_ptr = get_unaligned_le32(tmp);
++
+ 	putstr("Uncompressing Linux...");
+-	gunzip();
++	decompress(input_data, input_data_end - input_data,
++			NULL, NULL, output_data, NULL, error);
+ 	putstr(" done, booting the kernel.\n");
+ 	return output_ptr;
+ }
+@@ -341,11 +294,10 @@ int main()
+ {
+ 	output_data = output_buffer;
+ 
+-	makecrc();
+ 	putstr("Uncompressing Linux...");
+-	gunzip();
++	decompress(input_data, input_data_end - input_data,
++			NULL, NULL, output_data, NULL, error);
+ 	putstr("done.\n");
+ 	return 0;
+ }
+ #endif
+-	
+--- a/arch/arm/boot/compressed/piggy.S
++++ /dev/null
+@@ -1,6 +0,0 @@
+-	.section .piggydata,#alloc
+-	.globl	input_data
+-input_data:
+-	.incbin	"arch/arm/boot/compressed/piggy.gz"
+-	.globl	input_data_end
+-input_data_end:
+--- /dev/null
++++ b/arch/arm/boot/compressed/piggy.gzip.S
+@@ -0,0 +1,6 @@
++	.section .piggydata,#alloc
++	.globl	input_data
++input_data:
++	.incbin	"arch/arm/boot/compressed/piggy.gzip"
++	.globl	input_data_end
++input_data_end:
+--- /dev/null
++++ b/arch/arm/boot/compressed/piggy.lzo.S
+@@ -0,0 +1,6 @@
++	.section .piggydata,#alloc
++	.globl	input_data
++input_data:
++	.incbin	"arch/arm/boot/compressed/piggy.lzo"
++	.globl	input_data_end
++input_data_end:
diff --git a/target/linux/generic/patches-2.6.32/052-lzo_compressed_kernel_for_x86.patch b/target/linux/generic/patches-2.6.32/052-lzo_compressed_kernel_for_x86.patch
new file mode 100644
index 0000000000..ea7d2400ba
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/052-lzo_compressed_kernel_for_x86.patch
@@ -0,0 +1,48 @@
+--- a/arch/x86/Kconfig
++++ b/arch/x86/Kconfig
+@@ -49,6 +49,7 @@ config X86
+ 	select HAVE_KERNEL_GZIP
+ 	select HAVE_KERNEL_BZIP2
+ 	select HAVE_KERNEL_LZMA
++	select HAVE_KERNEL_LZO
+ 	select HAVE_ARCH_KMEMCHECK
+ 
+ config OUTPUT_FORMAT
+--- a/arch/x86/boot/compressed/Makefile
++++ b/arch/x86/boot/compressed/Makefile
+@@ -4,7 +4,7 @@
+ # create a compressed vmlinux image from the original vmlinux
+ #
+ 
+-targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma head_$(BITS).o misc.o piggy.o
++targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.lzo head_$(BITS).o misc.o piggy.o
+ 
+ KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
+ KBUILD_CFLAGS += -fno-strict-aliasing -fPIC
+@@ -48,10 +48,13 @@ $(obj)/vmlinux.bin.bz2: $(vmlinux.bin.al
+ 	$(call if_changed,bzip2)
+ $(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE
+ 	$(call if_changed,lzma)
++$(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y) FORCE
++	$(call if_changed,lzo)
+ 
+ suffix-$(CONFIG_KERNEL_GZIP)	:= gz
+ suffix-$(CONFIG_KERNEL_BZIP2)	:= bz2
+ suffix-$(CONFIG_KERNEL_LZMA)	:= lzma
++suffix-$(CONFIG_KERNEL_LZO) 	:= lzo
+ 
+ quiet_cmd_mkpiggy = MKPIGGY $@
+       cmd_mkpiggy = $(obj)/mkpiggy $< > $@ || ( rm -f $@ ; false )
+--- a/arch/x86/boot/compressed/misc.c
++++ b/arch/x86/boot/compressed/misc.c
+@@ -162,6 +162,10 @@ static int lines, cols;
+ #include "../../../../lib/decompress_unlzma.c"
+ #endif
+ 
++#ifdef CONFIG_KERNEL_LZO
++#include "../../../../lib/decompress_unlzo.c"
++#endif
++
+ static void scroll(void)
+ {
+ 	int i;
diff --git a/target/linux/generic/patches-2.6.32/053-lzo_compression_for_initramfs.patch b/target/linux/generic/patches-2.6.32/053-lzo_compression_for_initramfs.patch
new file mode 100644
index 0000000000..c05c3833d0
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/053-lzo_compression_for_initramfs.patch
@@ -0,0 +1,106 @@
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -120,6 +120,10 @@ config DECOMPRESS_LZMA
+ config DECOMPRESS_LZMA_NEEDED
+ 	 boolean
+ 
++config DECOMPRESS_LZO
++	select LZO_DECOMPRESS
++	tristate
++
+ #
+ # Generic allocator support is selected if needed
+ #
+--- a/lib/Makefile
++++ b/lib/Makefile
+@@ -69,6 +69,7 @@ obj-$(CONFIG_LZO_DECOMPRESS) += lzo/
+ lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
+ lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
+ lib-$(CONFIG_DECOMPRESS_LZMA) += decompress_unlzma.o
++lib-$(CONFIG_DECOMPRESS_LZO) += decompress_unlzo.o
+ 
+ obj-$(CONFIG_TEXTSEARCH) += textsearch.o
+ obj-$(CONFIG_TEXTSEARCH_KMP) += ts_kmp.o
+--- a/lib/decompress.c
++++ b/lib/decompress.c
+@@ -9,6 +9,7 @@
+ #include <linux/decompress/bunzip2.h>
+ #include <linux/decompress/unlzma.h>
+ #include <linux/decompress/inflate.h>
++#include <linux/decompress/unlzo.h>
+ 
+ #include <linux/types.h>
+ #include <linux/string.h>
+@@ -22,6 +23,9 @@
+ #ifndef CONFIG_DECOMPRESS_LZMA
+ # define unlzma NULL
+ #endif
++#ifndef CONFIG_DECOMPRESS_LZO
++# define unlzo NULL
++#endif
+ 
+ static const struct compress_format {
+ 	unsigned char magic[2];
+@@ -32,6 +36,7 @@ static const struct compress_format {
+ 	{ {037, 0236}, "gzip", gunzip },
+ 	{ {0x42, 0x5a}, "bzip2", bunzip2 },
+ 	{ {0x5d, 0x00}, "lzma", unlzma },
++	{ {0x89, 0x4c}, "lzo", unlzo },
+ 	{ {0, 0}, NULL, NULL }
+ };
+ 
+--- a/usr/Kconfig
++++ b/usr/Kconfig
+@@ -72,6 +72,15 @@ config RD_LZMA
+ 	  Support loading of a LZMA encoded initial ramdisk or cpio buffer
+ 	  If unsure, say N.
+ 
++config RD_LZO
++	bool "Support initial ramdisks compressed using LZO" if EMBEDDED
++	default !EMBEDDED
++	depends on BLK_DEV_INITRD && HAVE_KERNEL_LZO
++	select DECOMPRESS_LZO
++	help
++	  Support loading of a LZO encoded initial ramdisk or cpio buffer
++	  If unsure, say N.
++
+ choice
+ 	prompt "Built-in initramfs compression mode" if INITRAMFS_SOURCE!=""
+ 	help
+@@ -108,16 +117,15 @@ config INITRAMFS_COMPRESSION_GZIP
+ 	bool "Gzip"
+ 	depends on RD_GZIP
+ 	help
+-	  The old and tried gzip compression. Its compression ratio is
+-	  the poorest among the 3 choices; however its speed (both
+-	  compression and decompression) is the fastest.
++	  The old and tried gzip compression. It provides a good balance
++	  between compression ratio and decompression speed.
+ 
+ config INITRAMFS_COMPRESSION_BZIP2
+ 	bool "Bzip2"
+ 	depends on RD_BZIP2
+ 	help
+ 	  Its compression ratio and speed is intermediate.
+-	  Decompression speed is slowest among the three.  The initramfs
++	  Decompression speed is slowest among the four.  The initramfs
+ 	  size is about 10% smaller with bzip2, in comparison to gzip.
+ 	  Bzip2 uses a large amount of memory. For modern kernels you
+ 	  will need at least 8MB RAM or more for booting.
+@@ -128,7 +136,15 @@ config INITRAMFS_COMPRESSION_LZMA
+ 	help
+ 	  The most recent compression algorithm.
+ 	  Its ratio is best, decompression speed is between the other
+-	  two. Compression is slowest.	The initramfs size is about 33%
++	  three. Compression is slowest. The initramfs size is about 33%
+ 	  smaller with LZMA in comparison to gzip.
+ 
++config INITRAMFS_COMPRESSION_LZO
++	bool "LZO"
++	depends on RD_LZO
++	help
++	  Its compression ratio is the poorest among the four. The kernel
++	  size is about about 10% bigger than gzip; however its speed
++	  (both compression and decompression) is the fastest.
++
+ endchoice
diff --git a/target/linux/generic/patches-2.6.32/055-lzma_arm_kernel.patch b/target/linux/generic/patches-2.6.32/055-lzma_arm_kernel.patch
new file mode 100644
index 0000000000..a0111bd554
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/055-lzma_arm_kernel.patch
@@ -0,0 +1,57 @@
+From d0f226a0f104c7d1da1d215b8013359273e39e18 Mon Sep 17 00:00:00 2001
+From: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+Date: Fri, 16 Oct 2009 16:17:22 +0200
+Subject: [PATCH] Add LZMA decompression on ARM
+
+
+Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+---
+ arch/arm/Kconfig                      |    1 +
+ arch/arm/boot/compressed/Makefile     |    1 +
+ arch/arm/boot/compressed/misc.c       |    4 ++++
+ arch/arm/boot/compressed/piggy.lzma.S |    6 ++++++
+ 4 files changed, 12 insertions(+), 0 deletions(-)
+ create mode 100644 arch/arm/boot/compressed/piggy.lzma.S
+
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -20,6 +20,7 @@ config ARM
+ 	select HAVE_GENERIC_DMA_COHERENT
+ 	select HAVE_KERNEL_GZIP
+ 	select HAVE_KERNEL_LZO
++	select HAVE_KERNEL_LZMA
+ 	help
+ 	  The ARM series is a line of low-power-consumption RISC chip designs
+ 	  licensed by ARM Ltd and targeted at embedded applications and
+--- a/arch/arm/boot/compressed/Makefile
++++ b/arch/arm/boot/compressed/Makefile
+@@ -65,6 +65,7 @@ SEDFLAGS	= s/TEXT_START/$(ZTEXTADDR)/;s/
+ 
+ suffix_$(CONFIG_KERNEL_GZIP) = gzip
+ suffix_$(CONFIG_KERNEL_LZO)  = lzo
++suffix_$(CONFIG_KERNEL_LZMA)  = lzma
+ 
+ targets       := vmlinux vmlinux.lds \
+ 		 piggy.$(suffix_y) piggy.$(suffix_y).o \
+--- a/arch/arm/boot/compressed/misc.c
++++ b/arch/arm/boot/compressed/misc.c
+@@ -237,6 +237,10 @@ static unsigned long free_mem_end_ptr;
+ #include "../../../../lib/decompress_inflate.c"
+ #endif
+ 
++#ifdef CONFIG_KERNEL_LZMA
++#include "../../../../lib/decompress_unlzma.c"
++#endif
++
+ #ifdef CONFIG_KERNEL_LZO
+ #include "../../../../lib/decompress_unlzo.c"
+ #endif
+--- /dev/null
++++ b/arch/arm/boot/compressed/piggy.lzma.S
+@@ -0,0 +1,6 @@
++	.section .piggydata,#alloc
++	.globl	input_data
++input_data:
++	.incbin	"arch/arm/boot/compressed/piggy.lzma"
++	.globl	input_data_end
++input_data_end:
diff --git a/target/linux/generic/patches-2.6.32/057-arm_fix_uncompress_code.patch b/target/linux/generic/patches-2.6.32/057-arm_fix_uncompress_code.patch
new file mode 100644
index 0000000000..d11d11ba05
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/057-arm_fix_uncompress_code.patch
@@ -0,0 +1,63 @@
+From b53e9b5ebd5c6e718f54bcacd4e97b71533ca681 Mon Sep 17 00:00:00 2001
+From: Tony Lindgren <tony@atomide.com>
+Date: Thu, 14 Jan 2010 20:36:55 +0100
+Subject: [PATCH] ARM: 5882/1: ARM: Fix uncompress code compile for different defines of flush(void)
+
+Because of the include of the decompress_inflate.c file from
+boot/compress/misc.c, there are different flush() defines:
+
+In file included from arch/arm/boot/compressed/misc.c:249:
+arch/arm/boot/compressed/../../../../lib/decompress_inflate.c:138:29: error: macro "flush" passed 2 arguments, but takes just 0
+
+Fix this by removing the define of flush() in misc.c for
+CONFIG_DEBUG_ICEDCC as it's already defined in mach/uncompress.h,
+and that is being included unconditionally.
+
+Also use a static inline function instead of define
+for mach-mxc and mach-gemini to avoid similar bug
+for those platforms.
+
+Signed-off-by: Tony Lindgren <tony@atomide.com>
+Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
+---
+ arch/arm/boot/compressed/misc.c                |    1 -
+ arch/arm/mach-gemini/include/mach/uncompress.h |    4 +++-
+ arch/arm/plat-mxc/include/mach/uncompress.h    |    4 +++-
+ 3 files changed, 6 insertions(+), 3 deletions(-)
+
+--- a/arch/arm/boot/compressed/misc.c
++++ b/arch/arm/boot/compressed/misc.c
+@@ -88,7 +88,6 @@ static void icedcc_putc(int ch)
+ #endif
+ 
+ #define putc(ch)	icedcc_putc(ch)
+-#define flush()	do { } while (0)
+ #endif
+ 
+ static void putstr(const char *ptr)
+--- a/arch/arm/mach-gemini/include/mach/uncompress.h
++++ b/arch/arm/mach-gemini/include/mach/uncompress.h
+@@ -30,7 +30,9 @@ static inline void putc(char c)
+ 	UART[UART_TX] = c;
+ }
+ 
+-#define flush() do { } while (0)
++static inline void flush(void)
++{
++}
+ 
+ /*
+  * nothing to do
+--- a/arch/arm/plat-mxc/include/mach/uncompress.h
++++ b/arch/arm/plat-mxc/include/mach/uncompress.h
+@@ -60,7 +60,9 @@ static void putc(int ch)
+ 	UART(TXR) = ch;
+ }
+ 
+-#define flush() do { } while (0)
++static inline void flush(void)
++{
++}
+ 
+ #define MX1_UART1_BASE_ADDR	0x00206000
+ #define MX25_UART1_BASE_ADDR	0x43f90000
diff --git a/target/linux/generic/patches-2.6.32/060-block2mtd_init.patch b/target/linux/generic/patches-2.6.32/060-block2mtd_init.patch
new file mode 100644
index 0000000000..3a47c85bb9
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/060-block2mtd_init.patch
@@ -0,0 +1,120 @@
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -14,6 +14,7 @@
+ #include <linux/list.h>
+ #include <linux/init.h>
+ #include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
+ #include <linux/buffer_head.h>
+ #include <linux/mutex.h>
+ #include <linux/mount.h>
+@@ -232,10 +233,11 @@ static void block2mtd_free_device(struct
+ 
+ 
+ /* FIXME: ensure that mtd->size % erase_size == 0 */
+-static struct block2mtd_dev *add_device(char *devname, int erase_size)
++static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname)
+ {
+ 	struct block_device *bdev;
+ 	struct block2mtd_dev *dev;
++	struct mtd_partition *part;
+ 	char *name;
+ 
+ 	if (!devname)
+@@ -273,17 +275,17 @@ static struct block2mtd_dev *add_device(
+ 
+ 	mutex_init(&dev->write_mutex);
+ 
+-	/* Setup the MTD structure */
+-	/* make the name contain the block device in */
+-	name = kmalloc(sizeof("block2mtd: ") + strlen(devname) + 1,
+-			GFP_KERNEL);
++	if (!mtdname)
++		mtdname = devname;
++
++	name = kmalloc(strlen(mtdname) + 1, GFP_KERNEL);
+ 	if (!name)
+ 		goto devinit_err;
+ 
+-	sprintf(name, "block2mtd: %s", devname);
++	strcpy(name, mtdname);
+ 	dev->mtd.name = name;
+ 
+-	dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK;
++	dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK & ~(erase_size - 1);
+ 	dev->mtd.erasesize = erase_size;
+ 	dev->mtd.writesize = 1;
+ 	dev->mtd.type = MTD_RAM;
+@@ -296,14 +298,17 @@ static struct block2mtd_dev *add_device(
+ 	dev->mtd.priv = dev;
+ 	dev->mtd.owner = THIS_MODULE;
+ 
+-	if (add_mtd_device(&dev->mtd)) {
++	part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
++	part->name = dev->mtd.name;
++	part->offset = 0;
++	part->size = dev->mtd.size;
++	if (add_mtd_partitions(&dev->mtd, part, 1)) {
+ 		/* Device didnt get added, so free the entry */
+ 		goto devinit_err;
+ 	}
+ 	list_add(&dev->list, &blkmtd_device_list);
+ 	INFO("mtd%d: [%s] erase_size = %dKiB [%d]", dev->mtd.index,
+-			dev->mtd.name + strlen("block2mtd: "),
+-			dev->mtd.erasesize >> 10, dev->mtd.erasesize);
++			mtdname, dev->mtd.erasesize >> 10, dev->mtd.erasesize);
+ 	return dev;
+ 
+ devinit_err:
+@@ -376,9 +381,9 @@ static char block2mtd_paramline[80 + 12]
+ 
+ static int block2mtd_setup2(const char *val)
+ {
+-	char buf[80 + 12]; /* 80 for device, 12 for erase size */
++	char buf[80 + 12 + 80]; /* 80 for device, 12 for erase size, 80 for name */
+ 	char *str = buf;
+-	char *token[2];
++	char *token[3];
+ 	char *name;
+ 	size_t erase_size = PAGE_SIZE;
+ 	int i, ret;
+@@ -389,7 +394,7 @@ static int block2mtd_setup2(const char *
+ 	strcpy(str, val);
+ 	kill_final_newline(str);
+ 
+-	for (i = 0; i < 2; i++)
++	for (i = 0; i < 3; i++)
+ 		token[i] = strsep(&str, ",");
+ 
+ 	if (str)
+@@ -408,8 +413,10 @@ static int block2mtd_setup2(const char *
+ 			parse_err("illegal erase size");
+ 		}
+ 	}
++	if (token[2] && (strlen(token[2]) + 1 > 80))
++		parse_err("mtd device name too long");
+ 
+-	add_device(name, erase_size);
++	add_device(name, erase_size, token[2]);
+ 
+ 	return 0;
+ }
+@@ -443,7 +450,7 @@ static int block2mtd_setup(const char *v
+ 
+ 
+ module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);
+-MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>]\"");
++MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>]]\"");
+ 
+ static int __init block2mtd_init(void)
+ {
+--- a/fs/partitions/check.c
++++ b/fs/partitions/check.c
+@@ -625,6 +625,7 @@ try_scan:
+ 	kfree(state);
+ 	return 0;
+ }
++EXPORT_SYMBOL(rescan_partitions);
+ 
+ unsigned char *read_dev_sector(struct block_device *bdev, sector_t n, Sector *p)
+ {
diff --git a/target/linux/generic/patches-2.6.32/065-rootfs_split.patch b/target/linux/generic/patches-2.6.32/065-rootfs_split.patch
new file mode 100644
index 0000000000..22b3f5e900
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/065-rootfs_split.patch
@@ -0,0 +1,625 @@
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -53,6 +53,16 @@ config MTD_PARTITIONS
+ 	  devices. Partitioning on NFTL 'devices' is a different - that's the
+ 	  'normal' form of partitioning used on a block device.
+ 
++config MTD_ROOTFS_ROOT_DEV
++	bool "Automatically set 'rootfs' partition to be root filesystem"
++	depends on MTD_PARTITIONS
++	default y
++
++config MTD_ROOTFS_SPLIT
++	bool "Automatically split 'rootfs' partition for squashfs"
++	depends on MTD_PARTITIONS
++	default y
++
+ config MTD_REDBOOT_PARTS
+ 	tristate "RedBoot partition table parsing"
+ 	depends on MTD_PARTITIONS
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -18,6 +18,8 @@
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+ #include <linux/mtd/compatmac.h>
++#include <linux/root_dev.h>
++#include <linux/magic.h>
+ 
+ /* Our partition linked list */
+ static LIST_HEAD(mtd_partitions);
+@@ -35,7 +37,7 @@ struct mtd_part {
+  * the pointer to that structure with this macro.
+  */
+ #define PART(x)  ((struct mtd_part *)(x))
+-
++#define IS_PART(mtd) (mtd->read == part_read)
+ 
+ /*
+  * MTD methods which simply translate the effective address and pass through
+@@ -503,6 +505,150 @@ out_register:
+ 	return slave;
+ }
+ 
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++#define ROOTFS_SPLIT_NAME "rootfs_data"
++#define ROOTFS_REMOVED_NAME "<removed>"
++
++struct squashfs_super_block {
++	__le32 s_magic;
++	__le32 pad0[9];
++	__le64 bytes_used;
++};
++
++
++static int split_squashfs(struct mtd_info *master, int offset, int *split_offset)
++{
++	struct squashfs_super_block sb;
++	int len, ret;
++
++	ret = master->read(master, offset, sizeof(sb), &len, (void *) &sb);
++	if (ret || (len != sizeof(sb))) {
++		printk(KERN_ALERT "split_squashfs: error occured while reading "
++			"from \"%s\"\n", master->name);
++		return -EINVAL;
++	}
++
++	if (SQUASHFS_MAGIC != le32_to_cpu(sb.s_magic) ) {
++		printk(KERN_ALERT "split_squashfs: no squashfs found in \"%s\"\n",
++			master->name);
++		*split_offset = 0;
++		return 0;
++	}
++
++	if (le64_to_cpu((sb.bytes_used)) <= 0) {
++		printk(KERN_ALERT "split_squashfs: squashfs is empty in \"%s\"\n",
++			master->name);
++		*split_offset = 0;
++		return 0;
++	}
++
++	len = (u32) le64_to_cpu(sb.bytes_used);
++	len += (offset & 0x000fffff);
++	len +=  (master->erasesize - 1);
++	len &= ~(master->erasesize - 1);
++	len -= (offset & 0x000fffff);
++	*split_offset = offset + len;
++
++	return 0;
++}
++
++static int split_rootfs_data(struct mtd_info *master, struct mtd_info *rpart, const struct mtd_partition *part)
++{
++	struct mtd_partition *dpart;
++	struct mtd_part *slave = NULL;
++	int split_offset = 0;
++	int ret;
++
++	ret = split_squashfs(master, part->offset, &split_offset);
++	if (ret)
++		return ret;
++
++	if (split_offset <= 0)
++		return 0;
++
++	dpart = kmalloc(sizeof(*part)+sizeof(ROOTFS_SPLIT_NAME)+1, GFP_KERNEL);
++	if (dpart == NULL) {
++		printk(KERN_INFO "split_squashfs: no memory for partition \"%s\"\n",
++			ROOTFS_SPLIT_NAME);
++		return -ENOMEM;
++	}
++
++	memcpy(dpart, part, sizeof(*part));
++	dpart->name = (unsigned char *)&dpart[1];
++	strcpy(dpart->name, ROOTFS_SPLIT_NAME);
++
++	dpart->size -= split_offset - dpart->offset;
++	dpart->offset = split_offset;
++
++	if (dpart == NULL)
++		return 1;
++
++	printk(KERN_INFO "mtd: partition \"%s\" created automatically, ofs=%llX, len=%llX \n",
++		ROOTFS_SPLIT_NAME, dpart->offset, dpart->size);
++
++	slave = add_one_partition(master, dpart, 0, split_offset);
++	if (!slave) {
++		kfree(dpart);
++		return -ENOMEM;
++	}
++	rpart->split = &slave->mtd;
++
++	return 0;
++}
++
++static int refresh_rootfs_split(struct mtd_info *mtd)
++{
++	struct mtd_partition tpart;
++	struct mtd_part *part;
++	char *name;
++	//int index = 0;
++	int offset, size;
++	int ret;
++
++	part = PART(mtd);
++
++	/* check for the new squashfs offset first */
++	ret = split_squashfs(part->master, part->offset, &offset);
++	if (ret)
++		return ret;
++
++	if ((offset > 0) && !mtd->split) {
++		printk(KERN_INFO "%s: creating new split partition for \"%s\"\n", __func__, mtd->name);
++		/* if we don't have a rootfs split partition, create a new one */
++		tpart.name = (char *) mtd->name;
++		tpart.size = mtd->size;
++		tpart.offset = part->offset;
++
++		return split_rootfs_data(part->master, &part->mtd, &tpart);
++	} else if ((offset > 0) && mtd->split) {
++		/* update the offsets of the existing partition */
++		size = mtd->size + part->offset - offset;
++
++		part = PART(mtd->split);
++		part->offset = offset;
++		part->mtd.size = size;
++		printk(KERN_INFO "%s: %s partition \"" ROOTFS_SPLIT_NAME "\", offset: 0x%06x (0x%06x)\n",
++			__func__, (!strcmp(part->mtd.name, ROOTFS_SPLIT_NAME) ? "updating" : "creating"),
++			(u32) part->offset, (u32) part->mtd.size);
++		name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
++		strcpy(name, ROOTFS_SPLIT_NAME);
++		part->mtd.name = name;
++	} else if ((offset <= 0) && mtd->split) {
++		printk(KERN_INFO "%s: removing partition \"%s\"\n", __func__, mtd->split->name);
++
++		/* mark existing partition as removed */
++		part = PART(mtd->split);
++		name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
++		strcpy(name, ROOTFS_REMOVED_NAME);
++		part->mtd.name = name;
++		part->offset = 0;
++		part->mtd.size = 0;
++	}
++
++	return 0;
++}
++#endif /* CONFIG_MTD_ROOTFS_SPLIT */
++
+ /*
+  * This function, given a master MTD object and a partition table, creates
+  * and registers slave MTD objects which are bound to the master according to
+@@ -518,7 +664,7 @@ int add_mtd_partitions(struct mtd_info *
+ {
+ 	struct mtd_part *slave;
+ 	uint64_t cur_offset = 0;
+-	int i;
++	int i, ret;
+ 
+ 	printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
+ 
+@@ -526,6 +672,21 @@ int add_mtd_partitions(struct mtd_info *
+ 		slave = add_one_partition(master, parts + i, i, cur_offset);
+ 		if (!slave)
+ 			return -ENOMEM;
++
++		if (!strcmp(parts[i].name, "rootfs")) {
++#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
++			if (ROOT_DEV == 0) {
++				printk(KERN_NOTICE "mtd: partition \"rootfs\" "
++					"set to be root filesystem\n");
++				ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, slave->mtd.index);
++			}
++#endif
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++			ret = split_rootfs_data(master, &slave->mtd, &parts[i]);
++			/* if (ret == 0)
++				j++; */
++#endif
++		}
+ 		cur_offset = slave->offset + slave->mtd.size;
+ 	}
+ 
+@@ -533,6 +694,32 @@ int add_mtd_partitions(struct mtd_info *
+ }
+ EXPORT_SYMBOL(add_mtd_partitions);
+ 
++int refresh_mtd_partitions(struct mtd_info *mtd)
++{
++	int ret = 0;
++
++	if (IS_PART(mtd)) {
++		struct mtd_part *part;
++		struct mtd_info *master;
++
++		part = PART(mtd);
++		master = part->master;
++		if (master->refresh_device)
++			ret = master->refresh_device(master);
++	}
++
++	if (!ret && mtd->refresh_device)
++		ret = mtd->refresh_device(mtd);
++
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++	if (!ret && IS_PART(mtd) && !strcmp(mtd->name, "rootfs"))
++		refresh_rootfs_split(mtd);
++#endif
++
++	return 0;
++}
++EXPORT_SYMBOL_GPL(refresh_mtd_partitions);
++
+ static DEFINE_SPINLOCK(part_parser_lock);
+ static LIST_HEAD(part_parsers);
+ 
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -29,6 +29,8 @@ struct block2mtd_dev {
+ 	struct block_device *blkdev;
+ 	struct mtd_info mtd;
+ 	struct mutex write_mutex;
++	rwlock_t bdev_mutex;
++	char devname[0];
+ };
+ 
+ 
+@@ -81,6 +83,12 @@ static int block2mtd_erase(struct mtd_in
+ 	size_t len = instr->len;
+ 	int err;
+ 
++	read_lock(&dev->bdev_mutex);
++	if (!dev->blkdev) {
++		err = -EINVAL;
++		goto done;
++	}
++
+ 	instr->state = MTD_ERASING;
+ 	mutex_lock(&dev->write_mutex);
+ 	err = _block2mtd_erase(dev, from, len);
+@@ -93,6 +101,10 @@ static int block2mtd_erase(struct mtd_in
+ 
+ 	instr->state = MTD_ERASE_DONE;
+ 	mtd_erase_callback(instr);
++
++done:
++	read_unlock(&dev->bdev_mutex);
++
+ 	return err;
+ }
+ 
+@@ -104,10 +116,14 @@ static int block2mtd_read(struct mtd_inf
+ 	struct page *page;
+ 	int index = from >> PAGE_SHIFT;
+ 	int offset = from & (PAGE_SIZE-1);
+-	int cpylen;
++	int cpylen, err = 0;
++
++	read_lock(&dev->bdev_mutex);
++	if (!dev->blkdev || (from > mtd->size)) {
++		err = -EINVAL;
++		goto done;
++	}
+ 
+-	if (from > mtd->size)
+-		return -EINVAL;
+ 	if (from + len > mtd->size)
+ 		len = mtd->size - from;
+ 
+@@ -122,10 +138,14 @@ static int block2mtd_read(struct mtd_inf
+ 		len = len - cpylen;
+ 
+ 		page = page_read(dev->blkdev->bd_inode->i_mapping, index);
+-		if (!page)
+-			return -ENOMEM;
+-		if (IS_ERR(page))
+-			return PTR_ERR(page);
++		if (!page) {
++			err = -ENOMEM;
++			goto done;
++		}
++		if (IS_ERR(page)) {
++			err = PTR_ERR(page);
++			goto done;
++		}
+ 
+ 		memcpy(buf, page_address(page) + offset, cpylen);
+ 		page_cache_release(page);
+@@ -136,7 +156,10 @@ static int block2mtd_read(struct mtd_inf
+ 		offset = 0;
+ 		index++;
+ 	}
+-	return 0;
++
++done:
++	read_unlock(&dev->bdev_mutex);
++	return err;
+ }
+ 
+ 
+@@ -188,12 +211,22 @@ static int block2mtd_write(struct mtd_in
+ 		size_t *retlen, const u_char *buf)
+ {
+ 	struct block2mtd_dev *dev = mtd->priv;
+-	int err;
++	int err = 0;
++
++	read_lock(&dev->bdev_mutex);
++	if (!dev->blkdev) {
++		err = -EINVAL;
++		goto done;
++	}
+ 
+ 	if (!len)
+-		return 0;
+-	if (to >= mtd->size)
+-		return -ENOSPC;
++		goto done;
++
++	if (to >= mtd->size) {
++		err = -ENOSPC;
++		goto done;
++	}
++
+ 	if (to + len > mtd->size)
+ 		len = mtd->size - to;
+ 
+@@ -202,6 +235,9 @@ static int block2mtd_write(struct mtd_in
+ 	mutex_unlock(&dev->write_mutex);
+ 	if (err > 0)
+ 		err = 0;
++
++done:
++	read_unlock(&dev->bdev_mutex);
+ 	return err;
+ }
+ 
+@@ -210,52 +246,29 @@ static int block2mtd_write(struct mtd_in
+ static void block2mtd_sync(struct mtd_info *mtd)
+ {
+ 	struct block2mtd_dev *dev = mtd->priv;
+-	sync_blockdev(dev->blkdev);
+-	return;
+-}
+-
+-
+-static void block2mtd_free_device(struct block2mtd_dev *dev)
+-{
+-	if (!dev)
+-		return;
+-
+-	kfree(dev->mtd.name);
+ 
+-	if (dev->blkdev) {
+-		invalidate_mapping_pages(dev->blkdev->bd_inode->i_mapping,
+-					0, -1);
+-		close_bdev_exclusive(dev->blkdev, FMODE_READ|FMODE_WRITE);
+-	}
++	read_lock(&dev->bdev_mutex);
++	if (dev->blkdev)
++		sync_blockdev(dev->blkdev);
++	read_unlock(&dev->bdev_mutex);
+ 
+-	kfree(dev);
++	return;
+ }
+ 
+ 
+-/* FIXME: ensure that mtd->size % erase_size == 0 */
+-static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname)
++static int _open_bdev(struct block2mtd_dev *dev)
+ {
+ 	struct block_device *bdev;
+-	struct block2mtd_dev *dev;
+-	struct mtd_partition *part;
+-	char *name;
+-
+-	if (!devname)
+-		return NULL;
+-
+-	dev = kzalloc(sizeof(struct block2mtd_dev), GFP_KERNEL);
+-	if (!dev)
+-		return NULL;
+ 
+ 	/* Get a handle on the device */
+-	bdev = open_bdev_exclusive(devname, FMODE_READ|FMODE_WRITE, NULL);
++	bdev = open_bdev_exclusive(dev->devname, FMODE_READ|FMODE_WRITE, NULL);
+ #ifndef MODULE
+ 	if (IS_ERR(bdev)) {
+ 
+ 		/* We might not have rootfs mounted at this point. Try
+ 		   to resolve the device name by other means. */
+ 
+-		dev_t devt = name_to_dev_t(devname);
++		dev_t devt = name_to_dev_t(dev->devname);
+ 		if (devt) {
+ 			bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);
+ 		}
+@@ -263,17 +276,98 @@ static struct block2mtd_dev *add_device(
+ #endif
+ 
+ 	if (IS_ERR(bdev)) {
+-		ERROR("error: cannot open device %s", devname);
+-		goto devinit_err;
++		ERROR("error: cannot open device %s", dev->devname);
++		return 1;
+ 	}
+ 	dev->blkdev = bdev;
+ 
+ 	if (MAJOR(bdev->bd_dev) == MTD_BLOCK_MAJOR) {
+ 		ERROR("attempting to use an MTD device as a block device");
+-		goto devinit_err;
++		return 1;
+ 	}
+ 
++	return 0;
++}
++
++static void _close_bdev(struct block2mtd_dev *dev)
++{
++	struct block_device *bdev;
++
++	if (!dev->blkdev)
++		return;
++
++	bdev = dev->blkdev;
++	invalidate_mapping_pages(dev->blkdev->bd_inode->i_mapping, 0, -1);
++	close_bdev_exclusive(dev->blkdev, FMODE_READ|FMODE_WRITE);
++	dev->blkdev = NULL;
++}
++
++static void block2mtd_free_device(struct block2mtd_dev *dev)
++{
++	if (!dev)
++		return;
++
++	kfree(dev->mtd.name);
++	_close_bdev(dev);
++	kfree(dev);
++}
++
++
++static int block2mtd_refresh(struct mtd_info *mtd)
++{
++	struct block2mtd_dev *dev = mtd->priv;
++	struct block_device *bdev;
++	dev_t devt;
++	int err = 0;
++
++	/* no other mtd function can run at this point */
++	write_lock(&dev->bdev_mutex);
++
++	/* get the device number for the whole disk */
++	devt = MKDEV(MAJOR(dev->blkdev->bd_dev), 0);
++
++	/* close the old block device */
++	_close_bdev(dev);
++
++	/* open the whole disk, issue a partition rescan, then */
++	bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);
++	if (!bdev || !bdev->bd_disk)
++		err = -EINVAL;
++#ifndef CONFIG_MTD_BLOCK2MTD_MODULE
++	else
++		err = rescan_partitions(bdev->bd_disk, bdev);
++#endif
++	if (bdev)
++		close_bdev_exclusive(bdev, FMODE_READ|FMODE_WRITE);
++
++	/* try to open the partition block device again */
++	_open_bdev(dev);
++	write_unlock(&dev->bdev_mutex);
++
++	return err;
++}
++
++/* FIXME: ensure that mtd->size % erase_size == 0 */
++static struct block2mtd_dev *add_device(char *devname, int erase_size, char *mtdname)
++{
++	struct block2mtd_dev *dev;
++	struct mtd_partition *part;
++	char *name;
++
++	if (!devname)
++		return NULL;
++
++	dev = kzalloc(sizeof(struct block2mtd_dev) + strlen(devname) + 1, GFP_KERNEL);
++	if (!dev)
++		return NULL;
++
++	strcpy(dev->devname, devname);
++
++	if (_open_bdev(dev))
++		goto devinit_err;
++
+ 	mutex_init(&dev->write_mutex);
++	rwlock_init(&dev->bdev_mutex);
+ 
+ 	if (!mtdname)
+ 		mtdname = devname;
+@@ -297,6 +391,7 @@ static struct block2mtd_dev *add_device(
+ 	dev->mtd.read = block2mtd_read;
+ 	dev->mtd.priv = dev;
+ 	dev->mtd.owner = THIS_MODULE;
++	dev->mtd.refresh_device = block2mtd_refresh;
+ 
+ 	part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
+ 	part->name = dev->mtd.name;
+--- a/drivers/mtd/mtdchar.c
++++ b/drivers/mtd/mtdchar.c
+@@ -18,6 +18,7 @@
+ 
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/compatmac.h>
++#include <linux/mtd/partitions.h>
+ 
+ #include <asm/uaccess.h>
+ 
+@@ -814,6 +815,13 @@ static int mtd_ioctl(struct inode *inode
+ 		file->f_pos = 0;
+ 		break;
+ 	}
++#ifdef CONFIG_MTD_PARTITIONS
++	case MTDREFRESH:
++	{
++		ret = refresh_mtd_partitions(mtd);
++		break;
++	}
++#endif
+ 
+ 	default:
+ 		ret = -ENOTTY;
+--- a/include/linux/mtd/mtd.h
++++ b/include/linux/mtd/mtd.h
+@@ -101,6 +101,7 @@ struct mtd_oob_ops {
+ 	uint8_t		*oobbuf;
+ };
+ 
++struct mtd_info;
+ struct mtd_info {
+ 	u_char type;
+ 	uint32_t flags;
+@@ -241,6 +242,9 @@ struct mtd_info {
+ 	struct device dev;
+ 	int usecount;
+ 
++	int (*refresh_device)(struct mtd_info *mtd);
++	struct mtd_info *split;
++
+ 	/* If the driver is something smart, like UBI, it may need to maintain
+ 	 * its own reference counting. The below functions are only for driver.
+ 	 * The driver may register its callbacks. These callbacks are not
+--- a/include/linux/mtd/partitions.h
++++ b/include/linux/mtd/partitions.h
+@@ -34,12 +34,14 @@
+  * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK).
+  */
+ 
++struct mtd_partition;
+ struct mtd_partition {
+ 	char *name;			/* identifier string */
+ 	uint64_t size;			/* partition size */
+ 	uint64_t offset;		/* offset within the master MTD space */
+ 	uint32_t mask_flags;		/* master MTD flags to mask out for this partition */
+ 	struct nand_ecclayout *ecclayout;	/* out of band layout for this partition (NAND only)*/
++	int (*refresh_partition)(struct mtd_info *);
+ };
+ 
+ #define MTDPART_OFS_NXTBLK	(-2)
+@@ -51,6 +53,7 @@ struct mtd_info;
+ 
+ int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
+ int del_mtd_partitions(struct mtd_info *);
++int refresh_mtd_partitions(struct mtd_info *);
+ 
+ /*
+  * Functions dealing with the various ways of partitioning the space
+--- a/include/mtd/mtd-abi.h
++++ b/include/mtd/mtd-abi.h
+@@ -110,6 +110,7 @@ struct otp_info {
+ #define MEMERASE64		_IOW('M', 20, struct erase_info_user64)
+ #define MEMWRITEOOB64		_IOWR('M', 21, struct mtd_oob_buf64)
+ #define MEMREADOOB64		_IOWR('M', 22, struct mtd_oob_buf64)
++#define MTDREFRESH		_IO('M', 23)
+ 
+ /*
+  * Obsolete legacy interface. Keep it in order not to break userspace
diff --git a/target/linux/generic/patches-2.6.32/066-block2mtd_probe.patch b/target/linux/generic/patches-2.6.32/066-block2mtd_probe.patch
new file mode 100644
index 0000000000..b2b1a347f4
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/066-block2mtd_probe.patch
@@ -0,0 +1,10 @@
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -268,6 +268,7 @@ static int _open_bdev(struct block2mtd_d
+ 		/* We might not have rootfs mounted at this point. Try
+ 		   to resolve the device name by other means. */
+ 
++		wait_for_device_probe();
+ 		dev_t devt = name_to_dev_t(dev->devname);
+ 		if (devt) {
+ 			bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);
diff --git a/target/linux/generic/patches-2.6.32/070-redboot_space.patch b/target/linux/generic/patches-2.6.32/070-redboot_space.patch
new file mode 100644
index 0000000000..6ace83c01a
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/070-redboot_space.patch
@@ -0,0 +1,30 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -249,14 +249,21 @@ static int parse_redboot_partitions(stru
+ #endif
+ 		names += strlen(names)+1;
+ 
+-#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+ 		if(fl->next && fl->img->flash_base + fl->img->size + master->erasesize <= fl->next->img->flash_base) {
+-			i++;
+-			parts[i].offset = parts[i-1].size + parts[i-1].offset;
+-			parts[i].size = fl->next->img->flash_base - parts[i].offset;
+-			parts[i].name = nullname;
+-		}
++			if (!strcmp(parts[i].name, "rootfs")) {
++				parts[i].size = fl->next->img->flash_base;
++				parts[i].size &= ~(master->erasesize - 1);
++				parts[i].size -= parts[i].offset;
++#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
++				nrparts--;
++			} else {
++				i++;
++				parts[i].offset = parts[i-1].size + parts[i-1].offset;
++				parts[i].size = fl->next->img->flash_base - parts[i].offset;
++				parts[i].name = nullname;
+ #endif
++			}
++		}
+ 		tmp_fl = fl;
+ 		fl = fl->next;
+ 		kfree(tmp_fl);
diff --git a/target/linux/generic/patches-2.6.32/071-redboot_boardconfig.patch b/target/linux/generic/patches-2.6.32/071-redboot_boardconfig.patch
new file mode 100644
index 0000000000..f9bc4fe36b
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/071-redboot_boardconfig.patch
@@ -0,0 +1,60 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -11,6 +11,8 @@
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+ 
++#define BOARD_CONFIG_PART		"boardconfig"
++
+ struct fis_image_desc {
+     unsigned char name[16];      // Null terminated name
+     uint32_t	  flash_base;    // Address within FLASH of image
+@@ -41,6 +43,7 @@ static int parse_redboot_partitions(stru
+                              struct mtd_partition **pparts,
+                              unsigned long fis_origin)
+ {
++	unsigned long max_offset = 0;
+ 	int nrparts = 0;
+ 	struct fis_image_desc *buf;
+ 	struct mtd_partition *parts;
+@@ -209,14 +212,14 @@ static int parse_redboot_partitions(stru
+ 		}
+ 	}
+ #endif
+-	parts = kzalloc(sizeof(*parts)*nrparts + nulllen + namelen, GFP_KERNEL);
++	parts = kzalloc(sizeof(*parts) * (nrparts + 1) + nulllen + namelen + sizeof(BOARD_CONFIG_PART), GFP_KERNEL);
+ 
+ 	if (!parts) {
+ 		ret = -ENOMEM;
+ 		goto out;
+ 	}
+ 
+-	nullname = (char *)&parts[nrparts];
++	nullname = (char *)&parts[nrparts + 1];
+ #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+ 	if (nulllen > 0) {
+ 		strcpy(nullname, nullstring);
+@@ -235,6 +238,8 @@ static int parse_redboot_partitions(stru
+ 	}
+ #endif
+ 	for ( ; i<nrparts; i++) {
++		if(max_offset < buf[i].flash_base + buf[i].size)
++			max_offset = buf[i].flash_base + buf[i].size;
+ 		parts[i].size = fl->img->size;
+ 		parts[i].offset = fl->img->flash_base;
+ 		parts[i].name = names;
+@@ -268,6 +273,14 @@ static int parse_redboot_partitions(stru
+ 		fl = fl->next;
+ 		kfree(tmp_fl);
+ 	}
++	if(master->size - max_offset >= master->erasesize)
++	{
++		parts[nrparts].size = master->size - max_offset;
++		parts[nrparts].offset = max_offset;
++		parts[nrparts].name = names;
++		strcpy(names, BOARD_CONFIG_PART);
++		nrparts++;
++	}
+ 	ret = nrparts;
+ 	*pparts = parts;
+  out:
diff --git a/target/linux/generic/patches-2.6.32/080-mtd_plat_nand_chip_fixup.patch b/target/linux/generic/patches-2.6.32/080-mtd_plat_nand_chip_fixup.patch
new file mode 100644
index 0000000000..3897c33c23
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/080-mtd_plat_nand_chip_fixup.patch
@@ -0,0 +1,32 @@
+--- a/include/linux/mtd/nand.h
++++ b/include/linux/mtd/nand.h
+@@ -576,6 +576,7 @@ struct platform_nand_chip {
+ 	int			chip_delay;
+ 	unsigned int		options;
+ 	const char		**part_probe_types;
++	int			(*chip_fixup)(struct mtd_info *mtd);
+ 	void			(*set_parts)(uint64_t size,
+ 					struct platform_nand_chip *chip);
+ 	void			*priv;
+--- a/drivers/mtd/nand/plat_nand.c
++++ b/drivers/mtd/nand/plat_nand.c
+@@ -80,7 +80,18 @@ static int __devinit plat_nand_probe(str
+ 	}
+ 
+ 	/* Scan to find existance of the device */
+-	if (nand_scan(&data->mtd, 1)) {
++	if (nand_scan_ident(&data->mtd, 1)) {
++		res = -ENXIO;
++		goto out;
++	}
++
++	if (pdata->chip.chip_fixup) {
++		res = pdata->chip.chip_fixup(&data->mtd);
++		if (res)
++			goto out;
++	}
++
++	if (nand_scan_tail(&data->mtd)) {
+ 		res = -ENXIO;
+ 		goto out;
+ 	}
diff --git a/target/linux/generic/patches-2.6.32/081-mtd_myloader_partition_parser.patch b/target/linux/generic/patches-2.6.32/081-mtd_myloader_partition_parser.patch
new file mode 100644
index 0000000000..61b822ee88
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/081-mtd_myloader_partition_parser.patch
@@ -0,0 +1,35 @@
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -181,6 +181,22 @@ config MTD_AR7_PARTS
+ 	---help---
+ 	  TI AR7 partitioning support
+ 
++config MTD_MYLOADER_PARTS
++	tristate "MyLoader partition parsing"
++	depends on MTD_PARTITIONS && (ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX)
++	---help---
++	  MyLoader is a bootloader which allows the user to define partitions
++	  in flash devices, by putting a table in the second erase block
++	  on the device, similar to a partition table. This table gives the 
++	  offsets and lengths of the user defined partitions.
++
++	  If you need code which can detect and parse these tables, and
++	  register MTD 'partitions' corresponding to each image detected,
++	  enable this option.
++
++	  You will still need the parsing functions to be called by the driver
++	  for your particular device. It won't happen automatically.
++
+ comment "User Modules And Translation Layers"
+ 
+ config MTD_CHAR
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdli
+ obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
+ obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
+ obj-$(CONFIG_MTD_OF_PARTS)      += ofpart.o
++obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+ 
+ # 'Users' - code which presents functionality to userspace.
+ obj-$(CONFIG_MTD_CHAR)		+= mtdchar.o
diff --git a/target/linux/generic/patches-2.6.32/082-mtd_info_move_forward_decl.patch b/target/linux/generic/patches-2.6.32/082-mtd_info_move_forward_decl.patch
new file mode 100644
index 0000000000..13f0a217d4
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/082-mtd_info_move_forward_decl.patch
@@ -0,0 +1,18 @@
+--- a/include/linux/mtd/partitions.h
++++ b/include/linux/mtd/partitions.h
+@@ -33,6 +33,7 @@
+  * Note: writeable partitions require their size and offset be
+  * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK).
+  */
++struct mtd_info;
+ 
+ struct mtd_partition;
+ struct mtd_partition {
+@@ -49,7 +50,6 @@ struct mtd_partition {
+ #define MTDPART_SIZ_FULL	(0)
+ 
+ 
+-struct mtd_info;
+ 
+ int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
+ int del_mtd_partitions(struct mtd_info *);
diff --git a/target/linux/generic/patches-2.6.32/083-mtd_fix_nand_correct_data_return_code.patch b/target/linux/generic/patches-2.6.32/083-mtd_fix_nand_correct_data_return_code.patch
new file mode 100644
index 0000000000..97148d07d0
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/083-mtd_fix_nand_correct_data_return_code.patch
@@ -0,0 +1,12 @@
+--- a/drivers/mtd/nand/nand_ecc.c
++++ b/drivers/mtd/nand/nand_ecc.c
+@@ -492,8 +492,7 @@ int __nand_correct_data(unsigned char *b
+ 	if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1)
+ 		return 1;	/* error in ecc data; no action needed */
+ 
+-	printk(KERN_ERR "uncorrectable error : ");
+-	return -1;
++	return -EBADMSG;
+ }
+ EXPORT_SYMBOL(__nand_correct_data);
+ 
diff --git a/target/linux/generic/patches-2.6.32/084-mtd_m25p80_add_pm25lv_flash_support.patch b/target/linux/generic/patches-2.6.32/084-mtd_m25p80_add_pm25lv_flash_support.patch
new file mode 100644
index 0000000000..30c5cc9529
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/084-mtd_m25p80_add_pm25lv_flash_support.patch
@@ -0,0 +1,13 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -626,6 +626,10 @@ static struct flash_info __devinitdata m
+ 	{ "mx25l12805d", 0xc22018, 0, 64 * 1024, 256, },
+ 	{ "mx25l12855e", 0xc22618, 0, 64 * 1024, 256, },
+ 
++	/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
++	{ "pm25lv512",         0, 32 * 1024, 2, SECT_4K },
++	{ "pm25lv010",         0, 32 * 1024, 4, SECT_4K },
++
+ 	/* Spansion -- single (large) sector size only, at least
+ 	 * for the chips listed here (without boot sectors).
+ 	 */
diff --git a/target/linux/generic/patches-2.6.32/085-mtd_m25p80_add_en25pxx_support.patch b/target/linux/generic/patches-2.6.32/085-mtd_m25p80_add_en25pxx_support.patch
new file mode 100644
index 0000000000..d3bd1dd5ef
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/085-mtd_m25p80_add_en25pxx_support.patch
@@ -0,0 +1,13 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -626,6 +626,10 @@ static struct flash_info __devinitdata m
+ 	{ "mx25l12805d", 0xc22018, 0, 64 * 1024, 256, },
+ 	{ "mx25l12855e", 0xc22618, 0, 64 * 1024, 256, },
+ 
++	/* EON -- en25pxx */
++	{ "en25p32", 0x1c2016, 0, 64 * 1024,  64, },
++	{ "en25p64", 0x1c2017, 0, 64 * 1024, 128, },
++
+ 	/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
+ 	{ "pm25lv512",         0, 32 * 1024, 2, SECT_4K },
+ 	{ "pm25lv010",         0, 32 * 1024, 4, SECT_4K },
diff --git a/target/linux/generic/patches-2.6.32/086-mtd_m25p80_add_xxxs33b_support.patch b/target/linux/generic/patches-2.6.32/086-mtd_m25p80_add_xxxs33b_support.patch
new file mode 100644
index 0000000000..0c7c227ed8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/086-mtd_m25p80_add_xxxs33b_support.patch
@@ -0,0 +1,29 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -630,6 +630,11 @@ static struct flash_info __devinitdata m
+ 	{ "en25p32", 0x1c2016, 0, 64 * 1024,  64, },
+ 	{ "en25p64", 0x1c2017, 0, 64 * 1024, 128, },
+ 
++	/* Numonyx -- xxxs33b */
++	{ "160s33b",  0x898911, 0, 64 * 1024,  64, },
++	{ "320s33b",  0x898912, 0, 64 * 1024, 128, },
++	{ "640s33b",  0x898913, 0, 64 * 1024, 256, },
++
+ 	/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
+ 	{ "pm25lv512",         0, 32 * 1024, 2, SECT_4K },
+ 	{ "pm25lv010",         0, 32 * 1024, 4, SECT_4K },
+@@ -784,11 +789,12 @@ static int __devinit m25p_probe(struct s
+ 	dev_set_drvdata(&spi->dev, flash);
+ 
+ 	/*
+-	 * Atmel serial flash tend to power up
++	 * Atmel and Intel/Numonyx serial flash tend to power up
+ 	 * with the software protection bits set
+ 	 */
+ 
+-	if (info->jedec_id >> 16 == 0x1f) {
++	if (info->jedec_id >> 16 == 0x1f ||
++	    info->jedec_id >> 16 == 0x89) {
+ 		write_enable(flash);
+ 		write_sr(flash, 0);
+ 	}
diff --git a/target/linux/generic/patches-2.6.32/087-mtd-m25p80-add-w25q32-chip-support.patch b/target/linux/generic/patches-2.6.32/087-mtd-m25p80-add-w25q32-chip-support.patch
new file mode 100644
index 0000000000..5f44c1d696
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/087-mtd-m25p80-add-w25q32-chip-support.patch
@@ -0,0 +1,10 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -687,6 +687,7 @@ static struct flash_info __devinitdata m
+ 	{ "w25x80", 0xef3014, 0, 64 * 1024, 16, SECT_4K, },
+ 	{ "w25x16", 0xef3015, 0, 64 * 1024, 32, SECT_4K, },
+ 	{ "w25x32", 0xef3016, 0, 64 * 1024, 64, SECT_4K, },
++	{ "w25q32", 0xef4016, 0, 64 * 1024, 64, SECT_4K, },
+ 	{ "w25x64", 0xef3017, 0, 64 * 1024, 128, SECT_4K, },
+ };
+ 
diff --git a/target/linux/generic/patches-2.6.32/088-winbond_cmdset.patch b/target/linux/generic/patches-2.6.32/088-winbond_cmdset.patch
new file mode 100644
index 0000000000..d5889ce62d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/088-winbond_cmdset.patch
@@ -0,0 +1,10 @@
+--- a/drivers/mtd/chips/gen_probe.c
++++ b/drivers/mtd/chips/gen_probe.c
+@@ -249,6 +249,7 @@ static struct mtd_info *check_cmd_set(st
+ #endif
+ #ifdef CONFIG_MTD_CFI_AMDSTD
+ 	case 0x0002:
++	case 0x0006:
+ 		return cfi_cmdset_0002(map, primary);
+ #endif
+ #ifdef CONFIG_MTD_CFI_STAA
diff --git a/target/linux/generic/patches-2.6.32/089-mtd-samsung-flash.patch b/target/linux/generic/patches-2.6.32/089-mtd-samsung-flash.patch
new file mode 100644
index 0000000000..46923358b3
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/089-mtd-samsung-flash.patch
@@ -0,0 +1,37 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -327,9 +327,32 @@ static void cfi_fixup_major_minor(struct
+ {
+ 	// manufacturers defined in include/linux/mtd/cfi.h
+ 
+-	if (cfi->mfr == CFI_MFR_SAMSUNG && cfi->id == 0x257e &&
+-	    extp->MajorVersion == '0')
++	if (cfi->mfr == CFI_MFR_SAMSUNG &&
++	    extp->MajorVersion == '0') {
++		printk("  Fixed Samsung's Amd/Fujitsu Extended Query version from %c.%c",
++		       extp->MajorVersion, extp->MinorVersion);
++
+ 		extp->MajorVersion = '1';
++		extp->MinorVersion = '0';
++
++		printk(" to %c.%c.\n",
++		       extp->MajorVersion, extp->MinorVersion);
++	}
++
++	if (cfi->mfr == CFI_MFR_SAMSUNG &&
++	    extp->MajorVersion == '3' && extp->MinorVersion == '3') {
++		printk(KERN_NOTICE "  Newer Samsung flash detected, "
++		       "should be compatibile with Amd/Fujitsu.\n");
++
++		printk("  Fixed Samsung's Amd/Fujitsu Extended Query version from %c.%c",
++		       extp->MajorVersion, extp->MinorVersion);
++
++		extp->MajorVersion = '1';	// set to 1.3 (last defined version)
++		extp->MinorVersion = '3';
++
++		printk(" to %c.%c.\n",
++		       extp->MajorVersion, extp->MinorVersion);
++	}
+ }
+ 
+ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)
diff --git a/target/linux/generic/patches-2.6.32/100-netfilter_layer7_2.21.patch b/target/linux/generic/patches-2.6.32/100-netfilter_layer7_2.21.patch
new file mode 100644
index 0000000000..be7d97fe12
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/100-netfilter_layer7_2.21.patch
@@ -0,0 +1,2132 @@
+--- /dev/null
++++ b/include/linux/netfilter/xt_layer7.h
+@@ -0,0 +1,13 @@
++#ifndef _XT_LAYER7_H
++#define _XT_LAYER7_H
++
++#define MAX_PATTERN_LEN 8192
++#define MAX_PROTOCOL_LEN 256
++
++struct xt_layer7_info {
++    char protocol[MAX_PROTOCOL_LEN];
++    char pattern[MAX_PATTERN_LEN];
++    u_int8_t invert;
++};
++
++#endif /* _XT_LAYER7_H */
+--- a/include/net/netfilter/nf_conntrack.h
++++ b/include/net/netfilter/nf_conntrack.h
+@@ -116,6 +116,22 @@ struct nf_conn {
+ 	u_int32_t secmark;
+ #endif
+ 
++#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || \
++    defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++	struct {
++		/*
++		 * e.g. "http". NULL before decision. "unknown" after decision
++		 * if no match.
++		 */
++		char *app_proto;
++		/*
++		 * application layer data so far. NULL after match decision.
++		 */
++		char *app_data;
++		unsigned int app_data_len;
++	} layer7;
++#endif
++
+ 	/* Storage reserved for other modules: */
+ 	union nf_conntrack_proto proto;
+ 
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -858,6 +858,27 @@ config NETFILTER_XT_MATCH_STATE
+ 
+ 	  To compile it as a module, choose M here.  If unsure, say N.
+ 
++config NETFILTER_XT_MATCH_LAYER7
++	tristate '"layer7" match support'
++	depends on NETFILTER_XTABLES
++	depends on EXPERIMENTAL && (IP_NF_CONNTRACK || NF_CONNTRACK)
++       depends on NF_CT_ACCT
++	help
++	  Say Y if you want to be able to classify connections (and their
++	  packets) based on regular expression matching of their application
++	  layer data.   This is one way to classify applications such as
++	  peer-to-peer filesharing systems that do not always use the same
++	  port.
++
++	  To compile it as a module, choose M here.  If unsure, say N.
++
++config NETFILTER_XT_MATCH_LAYER7_DEBUG
++        bool 'Layer 7 debugging output'
++        depends on NETFILTER_XT_MATCH_LAYER7
++        help
++          Say Y to get lots of debugging output.
++
++
+ config NETFILTER_XT_MATCH_STATISTIC
+ 	tristate '"statistic" match support'
+ 	depends on NETFILTER_ADVANCED
+--- a/net/netfilter/Makefile
++++ b/net/netfilter/Makefile
+@@ -89,6 +89,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_RECENT) 
+ obj-$(CONFIG_NETFILTER_XT_MATCH_SCTP) += xt_sctp.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_SOCKET) += xt_socket.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STATE) += xt_state.o
++obj-$(CONFIG_NETFILTER_XT_MATCH_LAYER7) += xt_layer7.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STATISTIC) += xt_statistic.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STRING) += xt_string.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_TCPMSS) += xt_tcpmss.o
+--- a/net/netfilter/nf_conntrack_core.c
++++ b/net/netfilter/nf_conntrack_core.c
+@@ -201,6 +201,14 @@ destroy_conntrack(struct nf_conntrack *n
+ 	 * too. */
+ 	nf_ct_remove_expectations(ct);
+ 
++	#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++	if(ct->layer7.app_proto)
++		kfree(ct->layer7.app_proto);
++	if(ct->layer7.app_data)
++	kfree(ct->layer7.app_data);
++	#endif
++
++
+ 	/* We overload first tuple to link into unconfirmed list. */
+ 	if (!nf_ct_is_confirmed(ct)) {
+ 		BUG_ON(hlist_nulls_unhashed(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode));
+--- a/net/netfilter/nf_conntrack_standalone.c
++++ b/net/netfilter/nf_conntrack_standalone.c
+@@ -171,6 +171,12 @@ static int ct_seq_show(struct seq_file *
+ 		goto release;
+ #endif
+ 
++#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++	if(ct->layer7.app_proto &&
++           seq_printf(s, "l7proto=%s ", ct->layer7.app_proto))
++		return -ENOSPC;
++#endif
++
+ 	if (seq_printf(s, "use=%u\n", atomic_read(&ct->ct_general.use)))
+ 		goto release;
+ 
+--- /dev/null
++++ b/net/netfilter/regexp/regexp.c
+@@ -0,0 +1,1197 @@
++/*
++ * regcomp and regexec -- regsub and regerror are elsewhere
++ * @(#)regexp.c	1.3 of 18 April 87
++ *
++ *	Copyright (c) 1986 by University of Toronto.
++ *	Written by Henry Spencer.  Not derived from licensed software.
++ *
++ *	Permission is granted to anyone to use this software for any
++ *	purpose on any computer system, and to redistribute it freely,
++ *	subject to the following restrictions:
++ *
++ *	1. The author is not responsible for the consequences of use of
++ *		this software, no matter how awful, even if they arise
++ *		from defects in it.
++ *
++ *	2. The origin of this software must not be misrepresented, either
++ *		by explicit claim or by omission.
++ *
++ *	3. Altered versions must be plainly marked as such, and must not
++ *		be misrepresented as being the original software.
++ *
++ * Beware that some of this code is subtly aware of the way operator
++ * precedence is structured in regular expressions.  Serious changes in
++ * regular-expression syntax might require a total rethink.
++ *
++ * This code was modified by Ethan Sommer to work within the kernel
++ * (it now uses kmalloc etc..)
++ *
++ * Modified slightly by Matthew Strait to use more modern C.
++ */
++
++#include "regexp.h"
++#include "regmagic.h"
++
++/* added by ethan and matt.  Lets it work in both kernel and user space.
++(So iptables can use it, for instance.)  Yea, it goes both ways... */
++#if __KERNEL__
++  #define malloc(foo) kmalloc(foo,GFP_ATOMIC)
++#else
++  #define printk(format,args...) printf(format,##args)
++#endif
++
++void regerror(char * s)
++{
++        printk("<3>Regexp: %s\n", s);
++        /* NOTREACHED */
++}
++
++/*
++ * The "internal use only" fields in regexp.h are present to pass info from
++ * compile to execute that permits the execute phase to run lots faster on
++ * simple cases.  They are:
++ *
++ * regstart	char that must begin a match; '\0' if none obvious
++ * reganch	is the match anchored (at beginning-of-line only)?
++ * regmust	string (pointer into program) that match must include, or NULL
++ * regmlen	length of regmust string
++ *
++ * Regstart and reganch permit very fast decisions on suitable starting points
++ * for a match, cutting down the work a lot.  Regmust permits fast rejection
++ * of lines that cannot possibly match.  The regmust tests are costly enough
++ * that regcomp() supplies a regmust only if the r.e. contains something
++ * potentially expensive (at present, the only such thing detected is * or +
++ * at the start of the r.e., which can involve a lot of backup).  Regmlen is
++ * supplied because the test in regexec() needs it and regcomp() is computing
++ * it anyway.
++ */
++
++/*
++ * Structure for regexp "program".  This is essentially a linear encoding
++ * of a nondeterministic finite-state machine (aka syntax charts or
++ * "railroad normal form" in parsing technology).  Each node is an opcode
++ * plus a "next" pointer, possibly plus an operand.  "Next" pointers of
++ * all nodes except BRANCH implement concatenation; a "next" pointer with
++ * a BRANCH on both ends of it is connecting two alternatives.  (Here we
++ * have one of the subtle syntax dependencies:  an individual BRANCH (as
++ * opposed to a collection of them) is never concatenated with anything
++ * because of operator precedence.)  The operand of some types of node is
++ * a literal string; for others, it is a node leading into a sub-FSM.  In
++ * particular, the operand of a BRANCH node is the first node of the branch.
++ * (NB this is *not* a tree structure:  the tail of the branch connects
++ * to the thing following the set of BRANCHes.)  The opcodes are:
++ */
++
++/* definition	number	opnd?	meaning */
++#define	END	0	/* no	End of program. */
++#define	BOL	1	/* no	Match "" at beginning of line. */
++#define	EOL	2	/* no	Match "" at end of line. */
++#define	ANY	3	/* no	Match any one character. */
++#define	ANYOF	4	/* str	Match any character in this string. */
++#define	ANYBUT	5	/* str	Match any character not in this string. */
++#define	BRANCH	6	/* node	Match this alternative, or the next... */
++#define	BACK	7	/* no	Match "", "next" ptr points backward. */
++#define	EXACTLY	8	/* str	Match this string. */
++#define	NOTHING	9	/* no	Match empty string. */
++#define	STAR	10	/* node	Match this (simple) thing 0 or more times. */
++#define	PLUS	11	/* node	Match this (simple) thing 1 or more times. */
++#define	OPEN	20	/* no	Mark this point in input as start of #n. */
++			/*	OPEN+1 is number 1, etc. */
++#define	CLOSE	30	/* no	Analogous to OPEN. */
++
++/*
++ * Opcode notes:
++ *
++ * BRANCH	The set of branches constituting a single choice are hooked
++ *		together with their "next" pointers, since precedence prevents
++ *		anything being concatenated to any individual branch.  The
++ *		"next" pointer of the last BRANCH in a choice points to the
++ *		thing following the whole choice.  This is also where the
++ *		final "next" pointer of each individual branch points; each
++ *		branch starts with the operand node of a BRANCH node.
++ *
++ * BACK		Normal "next" pointers all implicitly point forward; BACK
++ *		exists to make loop structures possible.
++ *
++ * STAR,PLUS	'?', and complex '*' and '+', are implemented as circular
++ *		BRANCH structures using BACK.  Simple cases (one character
++ *		per match) are implemented with STAR and PLUS for speed
++ *		and to minimize recursive plunges.
++ *
++ * OPEN,CLOSE	...are numbered at compile time.
++ */
++
++/*
++ * A node is one char of opcode followed by two chars of "next" pointer.
++ * "Next" pointers are stored as two 8-bit pieces, high order first.  The
++ * value is a positive offset from the opcode of the node containing it.
++ * An operand, if any, simply follows the node.  (Note that much of the
++ * code generation knows about this implicit relationship.)
++ *
++ * Using two bytes for the "next" pointer is vast overkill for most things,
++ * but allows patterns to get big without disasters.
++ */
++#define	OP(p)	(*(p))
++#define	NEXT(p)	(((*((p)+1)&0377)<<8) + (*((p)+2)&0377))
++#define	OPERAND(p)	((p) + 3)
++
++/*
++ * See regmagic.h for one further detail of program structure.
++ */
++
++
++/*
++ * Utility definitions.
++ */
++#ifndef CHARBITS
++#define	UCHARAT(p)	((int)*(unsigned char *)(p))
++#else
++#define	UCHARAT(p)	((int)*(p)&CHARBITS)
++#endif
++
++#define	FAIL(m)	{ regerror(m); return(NULL); }
++#define	ISMULT(c)	((c) == '*' || (c) == '+' || (c) == '?')
++#define	META	"^$.[()|?+*\\"
++
++/*
++ * Flags to be passed up and down.
++ */
++#define	HASWIDTH	01	/* Known never to match null string. */
++#define	SIMPLE		02	/* Simple enough to be STAR/PLUS operand. */
++#define	SPSTART		04	/* Starts with * or +. */
++#define	WORST		0	/* Worst case. */
++
++/*
++ * Global work variables for regcomp().
++ */
++struct match_globals {
++char *reginput;		/* String-input pointer. */
++char *regbol;		/* Beginning of input, for ^ check. */
++char **regstartp;	/* Pointer to startp array. */
++char **regendp;		/* Ditto for endp. */
++char *regparse;		/* Input-scan pointer. */
++int regnpar;		/* () count. */
++char regdummy;
++char *regcode;		/* Code-emit pointer; &regdummy = don't. */
++long regsize;		/* Code size. */
++};
++
++/*
++ * Forward declarations for regcomp()'s friends.
++ */
++#ifndef STATIC
++#define	STATIC	static
++#endif
++STATIC char *reg(struct match_globals *g, int paren,int *flagp);
++STATIC char *regbranch(struct match_globals *g, int *flagp);
++STATIC char *regpiece(struct match_globals *g, int *flagp);
++STATIC char *regatom(struct match_globals *g, int *flagp);
++STATIC char *regnode(struct match_globals *g, char op);
++STATIC char *regnext(struct match_globals *g, char *p);
++STATIC void regc(struct match_globals *g, char b);
++STATIC void reginsert(struct match_globals *g, char op, char *opnd);
++STATIC void regtail(struct match_globals *g, char *p, char *val);
++STATIC void regoptail(struct match_globals *g, char *p, char *val);
++
++
++__kernel_size_t my_strcspn(const char *s1,const char *s2)
++{
++        char *scan1;
++        char *scan2;
++        int count;
++
++        count = 0;
++        for (scan1 = (char *)s1; *scan1 != '\0'; scan1++) {
++                for (scan2 = (char *)s2; *scan2 != '\0';)       /* ++ moved down. */
++                        if (*scan1 == *scan2++)
++                                return(count);
++                count++;
++        }
++        return(count);
++}
++
++/*
++ - regcomp - compile a regular expression into internal code
++ *
++ * We can't allocate space until we know how big the compiled form will be,
++ * but we can't compile it (and thus know how big it is) until we've got a
++ * place to put the code.  So we cheat:  we compile it twice, once with code
++ * generation turned off and size counting turned on, and once "for real".
++ * This also means that we don't allocate space until we are sure that the
++ * thing really will compile successfully, and we never have to move the
++ * code and thus invalidate pointers into it.  (Note that it has to be in
++ * one piece because free() must be able to free it all.)
++ *
++ * Beware that the optimization-preparation code in here knows about some
++ * of the structure of the compiled regexp.
++ */
++regexp *
++regcomp(char *exp,int *patternsize)
++{
++	register regexp *r;
++	register char *scan;
++	register char *longest;
++	register int len;
++	int flags;
++	struct match_globals g;
++	
++	/* commented out by ethan
++	   extern char *malloc();
++	*/
++
++	if (exp == NULL)
++		FAIL("NULL argument");
++
++	/* First pass: determine size, legality. */
++	g.regparse = exp;
++	g.regnpar = 1;
++	g.regsize = 0L;
++	g.regcode = &g.regdummy;
++	regc(&g, MAGIC);
++	if (reg(&g, 0, &flags) == NULL)
++		return(NULL);
++
++	/* Small enough for pointer-storage convention? */
++	if (g.regsize >= 32767L)		/* Probably could be 65535L. */
++		FAIL("regexp too big");
++
++	/* Allocate space. */
++	*patternsize=sizeof(regexp) + (unsigned)g.regsize;
++	r = (regexp *)malloc(sizeof(regexp) + (unsigned)g.regsize);
++	if (r == NULL)
++		FAIL("out of space");
++
++	/* Second pass: emit code. */
++	g.regparse = exp;
++	g.regnpar = 1;
++	g.regcode = r->program;
++	regc(&g, MAGIC);
++	if (reg(&g, 0, &flags) == NULL)
++		return(NULL);
++
++	/* Dig out information for optimizations. */
++	r->regstart = '\0';	/* Worst-case defaults. */
++	r->reganch = 0;
++	r->regmust = NULL;
++	r->regmlen = 0;
++	scan = r->program+1;			/* First BRANCH. */
++	if (OP(regnext(&g, scan)) == END) {		/* Only one top-level choice. */
++		scan = OPERAND(scan);
++
++		/* Starting-point info. */
++		if (OP(scan) == EXACTLY)
++			r->regstart = *OPERAND(scan);
++		else if (OP(scan) == BOL)
++			r->reganch++;
++
++		/*
++		 * If there's something expensive in the r.e., find the
++		 * longest literal string that must appear and make it the
++		 * regmust.  Resolve ties in favor of later strings, since
++		 * the regstart check works with the beginning of the r.e.
++		 * and avoiding duplication strengthens checking.  Not a
++		 * strong reason, but sufficient in the absence of others.
++		 */
++		if (flags&SPSTART) {
++			longest = NULL;
++			len = 0;
++			for (; scan != NULL; scan = regnext(&g, scan))
++				if (OP(scan) == EXACTLY && strlen(OPERAND(scan)) >= len) {
++					longest = OPERAND(scan);
++					len = strlen(OPERAND(scan));
++				}
++			r->regmust = longest;
++			r->regmlen = len;
++		}
++	}
++
++	return(r);
++}
++
++/*
++ - reg - regular expression, i.e. main body or parenthesized thing
++ *
++ * Caller must absorb opening parenthesis.
++ *
++ * Combining parenthesis handling with the base level of regular expression
++ * is a trifle forced, but the need to tie the tails of the branches to what
++ * follows makes it hard to avoid.
++ */
++static char *
++reg(struct match_globals *g, int paren, int *flagp /* Parenthesized? */ )
++{
++	register char *ret;
++	register char *br;
++	register char *ender;
++	register int parno = 0; /* 0 makes gcc happy */
++	int flags;
++
++	*flagp = HASWIDTH;	/* Tentatively. */
++
++	/* Make an OPEN node, if parenthesized. */
++	if (paren) {
++		if (g->regnpar >= NSUBEXP)
++			FAIL("too many ()");
++		parno = g->regnpar;
++		g->regnpar++;
++		ret = regnode(g, OPEN+parno);
++	} else
++		ret = NULL;
++
++	/* Pick up the branches, linking them together. */
++	br = regbranch(g, &flags);
++	if (br == NULL)
++		return(NULL);
++	if (ret != NULL)
++		regtail(g, ret, br);	/* OPEN -> first. */
++	else
++		ret = br;
++	if (!(flags&HASWIDTH))
++		*flagp &= ~HASWIDTH;
++	*flagp |= flags&SPSTART;
++	while (*g->regparse == '|') {
++		g->regparse++;
++		br = regbranch(g, &flags);
++		if (br == NULL)
++			return(NULL);
++		regtail(g, ret, br);	/* BRANCH -> BRANCH. */
++		if (!(flags&HASWIDTH))
++			*flagp &= ~HASWIDTH;
++		*flagp |= flags&SPSTART;
++	}
++
++	/* Make a closing node, and hook it on the end. */
++	ender = regnode(g, (paren) ? CLOSE+parno : END);	
++	regtail(g, ret, ender);
++
++	/* Hook the tails of the branches to the closing node. */
++	for (br = ret; br != NULL; br = regnext(g, br))
++		regoptail(g, br, ender);
++
++	/* Check for proper termination. */
++	if (paren && *g->regparse++ != ')') {
++		FAIL("unmatched ()");
++	} else if (!paren && *g->regparse != '\0') {
++		if (*g->regparse == ')') {
++			FAIL("unmatched ()");
++		} else
++			FAIL("junk on end");	/* "Can't happen". */
++		/* NOTREACHED */
++	}
++
++	return(ret);
++}
++
++/*
++ - regbranch - one alternative of an | operator
++ *
++ * Implements the concatenation operator.
++ */
++static char *
++regbranch(struct match_globals *g, int *flagp)
++{
++	register char *ret;
++	register char *chain;
++	register char *latest;
++	int flags;
++
++	*flagp = WORST;		/* Tentatively. */
++
++	ret = regnode(g, BRANCH);
++	chain = NULL;
++	while (*g->regparse != '\0' && *g->regparse != '|' && *g->regparse != ')') {
++		latest = regpiece(g, &flags);
++		if (latest == NULL)
++			return(NULL);
++		*flagp |= flags&HASWIDTH;
++		if (chain == NULL)	/* First piece. */
++			*flagp |= flags&SPSTART;
++		else
++			regtail(g, chain, latest);
++		chain = latest;
++	}
++	if (chain == NULL)	/* Loop ran zero times. */
++		(void) regnode(g, NOTHING);
++
++	return(ret);
++}
++
++/*
++ - regpiece - something followed by possible [*+?]
++ *
++ * Note that the branching code sequences used for ? and the general cases
++ * of * and + are somewhat optimized:  they use the same NOTHING node as
++ * both the endmarker for their branch list and the body of the last branch.
++ * It might seem that this node could be dispensed with entirely, but the
++ * endmarker role is not redundant.
++ */
++static char *
++regpiece(struct match_globals *g, int *flagp)
++{
++	register char *ret;
++	register char op;
++	register char *next;
++	int flags;
++
++	ret = regatom(g, &flags);
++	if (ret == NULL)
++		return(NULL);
++
++	op = *g->regparse;
++	if (!ISMULT(op)) {
++		*flagp = flags;
++		return(ret);
++	}
++
++	if (!(flags&HASWIDTH) && op != '?')
++		FAIL("*+ operand could be empty");
++	*flagp = (op != '+') ? (WORST|SPSTART) : (WORST|HASWIDTH);
++
++	if (op == '*' && (flags&SIMPLE))
++		reginsert(g, STAR, ret);
++	else if (op == '*') {
++		/* Emit x* as (x&|), where & means "self". */
++		reginsert(g, BRANCH, ret);			/* Either x */
++		regoptail(g, ret, regnode(g, BACK));		/* and loop */
++		regoptail(g, ret, ret);			/* back */
++		regtail(g, ret, regnode(g, BRANCH));		/* or */
++		regtail(g, ret, regnode(g, NOTHING));		/* null. */
++	} else if (op == '+' && (flags&SIMPLE))
++		reginsert(g, PLUS, ret);
++	else if (op == '+') {
++		/* Emit x+ as x(&|), where & means "self". */
++		next = regnode(g, BRANCH);			/* Either */
++		regtail(g, ret, next);
++		regtail(g, regnode(g, BACK), ret);		/* loop back */
++		regtail(g, next, regnode(g, BRANCH));		/* or */
++		regtail(g, ret, regnode(g, NOTHING));		/* null. */
++	} else if (op == '?') {
++		/* Emit x? as (x|) */
++		reginsert(g, BRANCH, ret);			/* Either x */
++		regtail(g, ret, regnode(g, BRANCH));		/* or */
++		next = regnode(g, NOTHING);		/* null. */
++		regtail(g, ret, next);
++		regoptail(g, ret, next);
++	}
++	g->regparse++;
++	if (ISMULT(*g->regparse))
++		FAIL("nested *?+");
++
++	return(ret);
++}
++
++/*
++ - regatom - the lowest level
++ *
++ * Optimization:  gobbles an entire sequence of ordinary characters so that
++ * it can turn them into a single node, which is smaller to store and
++ * faster to run.  Backslashed characters are exceptions, each becoming a
++ * separate node; the code is simpler that way and it's not worth fixing.
++ */
++static char *
++regatom(struct match_globals *g, int *flagp)
++{
++	register char *ret;
++	int flags;
++
++	*flagp = WORST;		/* Tentatively. */
++
++	switch (*g->regparse++) {
++	case '^':
++		ret = regnode(g, BOL);
++		break;
++	case '$':
++		ret = regnode(g, EOL);
++		break;
++	case '.':
++		ret = regnode(g, ANY);
++		*flagp |= HASWIDTH|SIMPLE;
++		break;
++	case '[': {
++			register int class;
++			register int classend;
++
++			if (*g->regparse == '^') {	/* Complement of range. */
++				ret = regnode(g, ANYBUT);
++				g->regparse++;
++			} else
++				ret = regnode(g, ANYOF);
++			if (*g->regparse == ']' || *g->regparse == '-')
++				regc(g, *g->regparse++);
++			while (*g->regparse != '\0' && *g->regparse != ']') {
++				if (*g->regparse == '-') {
++					g->regparse++;
++					if (*g->regparse == ']' || *g->regparse == '\0')
++						regc(g, '-');
++					else {
++						class = UCHARAT(g->regparse-2)+1;
++						classend = UCHARAT(g->regparse);
++						if (class > classend+1)
++							FAIL("invalid [] range");
++						for (; class <= classend; class++)
++							regc(g, class);
++						g->regparse++;
++					}
++				} else
++					regc(g, *g->regparse++);
++			}
++			regc(g, '\0');
++			if (*g->regparse != ']')
++				FAIL("unmatched []");
++			g->regparse++;
++			*flagp |= HASWIDTH|SIMPLE;
++		}
++		break;
++	case '(':
++		ret = reg(g, 1, &flags);
++		if (ret == NULL)
++			return(NULL);
++		*flagp |= flags&(HASWIDTH|SPSTART);
++		break;
++	case '\0':
++	case '|':
++	case ')':
++		FAIL("internal urp");	/* Supposed to be caught earlier. */
++		break;
++	case '?':
++	case '+':
++	case '*':
++		FAIL("?+* follows nothing");
++		break;
++	case '\\':
++		if (*g->regparse == '\0')
++			FAIL("trailing \\");
++		ret = regnode(g, EXACTLY);
++		regc(g, *g->regparse++);
++		regc(g, '\0');
++		*flagp |= HASWIDTH|SIMPLE;
++		break;
++	default: {
++			register int len;
++			register char ender;
++
++			g->regparse--;
++			len = my_strcspn((const char *)g->regparse, (const char *)META);
++			if (len <= 0)
++				FAIL("internal disaster");
++			ender = *(g->regparse+len);
++			if (len > 1 && ISMULT(ender))
++				len--;		/* Back off clear of ?+* operand. */
++			*flagp |= HASWIDTH;
++			if (len == 1)
++				*flagp |= SIMPLE;
++			ret = regnode(g, EXACTLY);
++			while (len > 0) {
++				regc(g, *g->regparse++);
++				len--;
++			}
++			regc(g, '\0');
++		}
++		break;
++	}
++
++	return(ret);
++}
++
++/*
++ - regnode - emit a node
++ */
++static char *			/* Location. */
++regnode(struct match_globals *g, char op)
++{
++	register char *ret;
++	register char *ptr;
++
++	ret = g->regcode;
++	if (ret == &g->regdummy) {
++		g->regsize += 3;
++		return(ret);
++	}
++
++	ptr = ret;
++	*ptr++ = op;
++	*ptr++ = '\0';		/* Null "next" pointer. */
++	*ptr++ = '\0';
++	g->regcode = ptr;
++
++	return(ret);
++}
++
++/*
++ - regc - emit (if appropriate) a byte of code
++ */
++static void
++regc(struct match_globals *g, char b)
++{
++	if (g->regcode != &g->regdummy)
++		*g->regcode++ = b;
++	else
++		g->regsize++;
++}
++
++/*
++ - reginsert - insert an operator in front of already-emitted operand
++ *
++ * Means relocating the operand.
++ */
++static void
++reginsert(struct match_globals *g, char op, char* opnd)
++{
++	register char *src;
++	register char *dst;
++	register char *place;
++
++	if (g->regcode == &g->regdummy) {
++		g->regsize += 3;
++		return;
++	}
++
++	src = g->regcode;
++	g->regcode += 3;
++	dst = g->regcode;
++	while (src > opnd)
++		*--dst = *--src;
++
++	place = opnd;		/* Op node, where operand used to be. */
++	*place++ = op;
++	*place++ = '\0';
++	*place++ = '\0';
++}
++
++/*
++ - regtail - set the next-pointer at the end of a node chain
++ */
++static void
++regtail(struct match_globals *g, char *p, char *val)
++{
++	register char *scan;
++	register char *temp;
++	register int offset;
++
++	if (p == &g->regdummy)
++		return;
++
++	/* Find last node. */
++	scan = p;
++	for (;;) {
++		temp = regnext(g, scan);
++		if (temp == NULL)
++			break;
++		scan = temp;
++	}
++
++	if (OP(scan) == BACK)
++		offset = scan - val;
++	else
++		offset = val - scan;
++	*(scan+1) = (offset>>8)&0377;
++	*(scan+2) = offset&0377;
++}
++
++/*
++ - regoptail - regtail on operand of first argument; nop if operandless
++ */
++static void
++regoptail(struct match_globals *g, char *p, char *val)
++{
++	/* "Operandless" and "op != BRANCH" are synonymous in practice. */
++	if (p == NULL || p == &g->regdummy || OP(p) != BRANCH)
++		return;
++	regtail(g, OPERAND(p), val);
++}
++
++/*
++ * regexec and friends
++ */
++
++
++/*
++ * Forwards.
++ */
++STATIC int regtry(struct match_globals *g, regexp *prog, char *string);
++STATIC int regmatch(struct match_globals *g, char *prog);
++STATIC int regrepeat(struct match_globals *g, char *p);
++
++#ifdef DEBUG
++int regnarrate = 0;
++void regdump();
++STATIC char *regprop(char *op);
++#endif
++
++/*
++ - regexec - match a regexp against a string
++ */
++int
++regexec(regexp *prog, char *string)
++{
++	register char *s;
++	struct match_globals g;
++
++	/* Be paranoid... */
++	if (prog == NULL || string == NULL) {
++		printk("<3>Regexp: NULL parameter\n");
++		return(0);
++	}
++
++	/* Check validity of program. */
++	if (UCHARAT(prog->program) != MAGIC) {
++		printk("<3>Regexp: corrupted program\n");
++		return(0);
++	}
++
++	/* If there is a "must appear" string, look for it. */
++	if (prog->regmust != NULL) {
++		s = string;
++		while ((s = strchr(s, prog->regmust[0])) != NULL) {
++			if (strncmp(s, prog->regmust, prog->regmlen) == 0)
++				break;	/* Found it. */
++			s++;
++		}
++		if (s == NULL)	/* Not present. */
++			return(0);
++	}
++
++	/* Mark beginning of line for ^ . */
++	g.regbol = string;
++
++	/* Simplest case:  anchored match need be tried only once. */
++	if (prog->reganch)
++		return(regtry(&g, prog, string));
++
++	/* Messy cases:  unanchored match. */
++	s = string;
++	if (prog->regstart != '\0')
++		/* We know what char it must start with. */
++		while ((s = strchr(s, prog->regstart)) != NULL) {
++			if (regtry(&g, prog, s))
++				return(1);
++			s++;
++		}
++	else
++		/* We don't -- general case. */
++		do {
++			if (regtry(&g, prog, s))
++				return(1);
++		} while (*s++ != '\0');
++
++	/* Failure. */
++	return(0);
++}
++
++/*
++ - regtry - try match at specific point
++ */
++static int			/* 0 failure, 1 success */
++regtry(struct match_globals *g, regexp *prog, char *string)
++{
++	register int i;
++	register char **sp;
++	register char **ep;
++
++	g->reginput = string;
++	g->regstartp = prog->startp;
++	g->regendp = prog->endp;
++
++	sp = prog->startp;
++	ep = prog->endp;
++	for (i = NSUBEXP; i > 0; i--) {
++		*sp++ = NULL;
++		*ep++ = NULL;
++	}
++	if (regmatch(g, prog->program + 1)) {
++		prog->startp[0] = string;
++		prog->endp[0] = g->reginput;
++		return(1);
++	} else
++		return(0);
++}
++
++/*
++ - regmatch - main matching routine
++ *
++ * Conceptually the strategy is simple:  check to see whether the current
++ * node matches, call self recursively to see whether the rest matches,
++ * and then act accordingly.  In practice we make some effort to avoid
++ * recursion, in particular by going through "ordinary" nodes (that don't
++ * need to know whether the rest of the match failed) by a loop instead of
++ * by recursion.
++ */
++static int			/* 0 failure, 1 success */
++regmatch(struct match_globals *g, char *prog)
++{
++	register char *scan = prog; /* Current node. */
++	char *next;		    /* Next node. */
++
++#ifdef DEBUG
++	if (scan != NULL && regnarrate)
++		fprintf(stderr, "%s(\n", regprop(scan));
++#endif
++	while (scan != NULL) {
++#ifdef DEBUG
++		if (regnarrate)
++			fprintf(stderr, "%s...\n", regprop(scan));
++#endif
++		next = regnext(g, scan);
++
++		switch (OP(scan)) {
++		case BOL:
++			if (g->reginput != g->regbol)
++				return(0);
++			break;
++		case EOL:
++			if (*g->reginput != '\0')
++				return(0);
++			break;
++		case ANY:
++			if (*g->reginput == '\0')
++				return(0);
++			g->reginput++;
++			break;
++		case EXACTLY: {
++				register int len;
++				register char *opnd;
++
++				opnd = OPERAND(scan);
++				/* Inline the first character, for speed. */
++				if (*opnd != *g->reginput)
++					return(0);
++				len = strlen(opnd);
++				if (len > 1 && strncmp(opnd, g->reginput, len) != 0)
++					return(0);
++				g->reginput += len;
++			}
++			break;
++		case ANYOF:
++			if (*g->reginput == '\0' || strchr(OPERAND(scan), *g->reginput) == NULL)
++				return(0);
++			g->reginput++;
++			break;
++		case ANYBUT:
++			if (*g->reginput == '\0' || strchr(OPERAND(scan), *g->reginput) != NULL)
++				return(0);
++			g->reginput++;
++			break;
++		case NOTHING:
++		case BACK:
++			break;
++		case OPEN+1:
++		case OPEN+2:
++		case OPEN+3:
++		case OPEN+4:
++		case OPEN+5:
++		case OPEN+6:
++		case OPEN+7:
++		case OPEN+8:
++		case OPEN+9: {
++				register int no;
++				register char *save;
++
++				no = OP(scan) - OPEN;
++				save = g->reginput;
++
++				if (regmatch(g, next)) {
++					/*
++					 * Don't set startp if some later
++					 * invocation of the same parentheses
++					 * already has.
++					 */
++					if (g->regstartp[no] == NULL)
++						g->regstartp[no] = save;
++					return(1);
++				} else
++					return(0);
++			}
++			break;
++		case CLOSE+1:
++		case CLOSE+2:
++		case CLOSE+3:
++		case CLOSE+4:
++		case CLOSE+5:
++		case CLOSE+6:
++		case CLOSE+7:
++		case CLOSE+8:
++		case CLOSE+9:
++			{
++				register int no;
++				register char *save;
++
++				no = OP(scan) - CLOSE;
++				save = g->reginput;
++
++				if (regmatch(g, next)) {
++					/*
++					 * Don't set endp if some later
++					 * invocation of the same parentheses
++					 * already has.
++					 */
++					if (g->regendp[no] == NULL)
++						g->regendp[no] = save;
++					return(1);
++				} else
++					return(0);
++			}
++			break;
++		case BRANCH: {
++				register char *save;
++
++				if (OP(next) != BRANCH)		/* No choice. */
++					next = OPERAND(scan);	/* Avoid recursion. */
++				else {
++					do {
++						save = g->reginput;
++						if (regmatch(g, OPERAND(scan)))
++							return(1);
++						g->reginput = save;
++						scan = regnext(g, scan);
++					} while (scan != NULL && OP(scan) == BRANCH);
++					return(0);
++					/* NOTREACHED */
++				}
++			}
++			break;
++		case STAR:
++		case PLUS: {
++				register char nextch;
++				register int no;
++				register char *save;
++				register int min;
++
++				/*
++				 * Lookahead to avoid useless match attempts
++				 * when we know what character comes next.
++				 */
++				nextch = '\0';
++				if (OP(next) == EXACTLY)
++					nextch = *OPERAND(next);
++				min = (OP(scan) == STAR) ? 0 : 1;
++				save = g->reginput;
++				no = regrepeat(g, OPERAND(scan));
++				while (no >= min) {
++					/* If it could work, try it. */
++					if (nextch == '\0' || *g->reginput == nextch)
++						if (regmatch(g, next))
++							return(1);
++					/* Couldn't or didn't -- back up. */
++					no--;
++					g->reginput = save + no;
++				}
++				return(0);
++			}
++			break;
++		case END:
++			return(1);	/* Success! */
++			break;
++		default:
++			printk("<3>Regexp: memory corruption\n");
++			return(0);
++			break;
++		}
++
++		scan = next;
++	}
++
++	/*
++	 * We get here only if there's trouble -- normally "case END" is
++	 * the terminating point.
++	 */
++	printk("<3>Regexp: corrupted pointers\n");
++	return(0);
++}
++
++/*
++ - regrepeat - repeatedly match something simple, report how many
++ */
++static int
++regrepeat(struct match_globals *g, char *p)
++{
++	register int count = 0;
++	register char *scan;
++	register char *opnd;
++
++	scan = g->reginput;
++	opnd = OPERAND(p);
++	switch (OP(p)) {
++	case ANY:
++		count = strlen(scan);
++		scan += count;
++		break;
++	case EXACTLY:
++		while (*opnd == *scan) {
++			count++;
++			scan++;
++		}
++		break;
++	case ANYOF:
++		while (*scan != '\0' && strchr(opnd, *scan) != NULL) {
++			count++;
++			scan++;
++		}
++		break;
++	case ANYBUT:
++		while (*scan != '\0' && strchr(opnd, *scan) == NULL) {
++			count++;
++			scan++;
++		}
++		break;
++	default:		/* Oh dear.  Called inappropriately. */
++		printk("<3>Regexp: internal foulup\n");
++		count = 0;	/* Best compromise. */
++		break;
++	}
++	g->reginput = scan;
++
++	return(count);
++}
++
++/*
++ - regnext - dig the "next" pointer out of a node
++ */
++static char*
++regnext(struct match_globals *g, char *p)
++{
++	register int offset;
++
++	if (p == &g->regdummy)
++		return(NULL);
++
++	offset = NEXT(p);
++	if (offset == 0)
++		return(NULL);
++
++	if (OP(p) == BACK)
++		return(p-offset);
++	else
++		return(p+offset);
++}
++
++#ifdef DEBUG
++
++STATIC char *regprop();
++
++/*
++ - regdump - dump a regexp onto stdout in vaguely comprehensible form
++ */
++void
++regdump(regexp *r)
++{
++	register char *s;
++	register char op = EXACTLY;	/* Arbitrary non-END op. */
++	register char *next;
++	/* extern char *strchr(); */
++
++
++	s = r->program + 1;
++	while (op != END) {	/* While that wasn't END last time... */
++		op = OP(s);
++		printf("%2d%s", s-r->program, regprop(s));	/* Where, what. */
++		next = regnext(s);
++		if (next == NULL)		/* Next ptr. */
++			printf("(0)");
++		else
++			printf("(%d)", (s-r->program)+(next-s));
++		s += 3;
++		if (op == ANYOF || op == ANYBUT || op == EXACTLY) {
++			/* Literal string, where present. */
++			while (*s != '\0') {
++				putchar(*s);
++				s++;
++			}
++			s++;
++		}
++		putchar('\n');
++	}
++
++	/* Header fields of interest. */
++	if (r->regstart != '\0')
++		printf("start `%c' ", r->regstart);
++	if (r->reganch)
++		printf("anchored ");
++	if (r->regmust != NULL)
++		printf("must have \"%s\"", r->regmust);
++	printf("\n");
++}
++
++/*
++ - regprop - printable representation of opcode
++ */
++static char *
++regprop(char *op)
++{
++#define BUFLEN 50
++	register char *p;
++	static char buf[BUFLEN];
++
++	strcpy(buf, ":");
++
++	switch (OP(op)) {
++	case BOL:
++		p = "BOL";
++		break;
++	case EOL:
++		p = "EOL";
++		break;
++	case ANY:
++		p = "ANY";
++		break;
++	case ANYOF:
++		p = "ANYOF";
++		break;
++	case ANYBUT:
++		p = "ANYBUT";
++		break;
++	case BRANCH:
++		p = "BRANCH";
++		break;
++	case EXACTLY:
++		p = "EXACTLY";
++		break;
++	case NOTHING:
++		p = "NOTHING";
++		break;
++	case BACK:
++		p = "BACK";
++		break;
++	case END:
++		p = "END";
++		break;
++	case OPEN+1:
++	case OPEN+2:
++	case OPEN+3:
++	case OPEN+4:
++	case OPEN+5:
++	case OPEN+6:
++	case OPEN+7:
++	case OPEN+8:
++	case OPEN+9:
++		snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "OPEN%d", OP(op)-OPEN);
++		p = NULL;
++		break;
++	case CLOSE+1:
++	case CLOSE+2:
++	case CLOSE+3:
++	case CLOSE+4:
++	case CLOSE+5:
++	case CLOSE+6:
++	case CLOSE+7:
++	case CLOSE+8:
++	case CLOSE+9:
++		snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "CLOSE%d", OP(op)-CLOSE);
++		p = NULL;
++		break;
++	case STAR:
++		p = "STAR";
++		break;
++	case PLUS:
++		p = "PLUS";
++		break;
++	default:
++		printk("<3>Regexp: corrupted opcode\n");
++		break;
++	}
++	if (p != NULL)
++		strncat(buf, p, BUFLEN-strlen(buf));
++	return(buf);
++}
++#endif
++
++
+--- /dev/null
++++ b/net/netfilter/regexp/regexp.h
+@@ -0,0 +1,41 @@
++/*
++ * Definitions etc. for regexp(3) routines.
++ *
++ * Caveat:  this is V8 regexp(3) [actually, a reimplementation thereof],
++ * not the System V one.
++ */
++
++#ifndef REGEXP_H
++#define REGEXP_H
++
++
++/*
++http://www.opensource.apple.com/darwinsource/10.3/expect-1/expect/expect.h ,
++which contains a version of this library, says:
++
++ *
++ * NSUBEXP must be at least 10, and no greater than 117 or the parser
++ * will not work properly.
++ *
++
++However, it looks rather like this library is limited to 10.  If you think
++otherwise, let us know.
++*/
++
++#define NSUBEXP  10
++typedef struct regexp {
++	char *startp[NSUBEXP];
++	char *endp[NSUBEXP];
++	char regstart;		/* Internal use only. */
++	char reganch;		/* Internal use only. */
++	char *regmust;		/* Internal use only. */
++	int regmlen;		/* Internal use only. */
++	char program[1];	/* Unwarranted chumminess with compiler. */
++} regexp;
++
++regexp * regcomp(char *exp, int *patternsize);
++int regexec(regexp *prog, char *string);
++void regsub(regexp *prog, char *source, char *dest);
++void regerror(char *s);
++
++#endif
+--- /dev/null
++++ b/net/netfilter/regexp/regmagic.h
+@@ -0,0 +1,5 @@
++/*
++ * The first byte of the regexp internal "program" is actually this magic
++ * number; the start node begins in the second byte.
++ */
++#define	MAGIC	0234
+--- /dev/null
++++ b/net/netfilter/regexp/regsub.c
+@@ -0,0 +1,95 @@
++/*
++ * regsub
++ * @(#)regsub.c	1.3 of 2 April 86
++ *
++ *	Copyright (c) 1986 by University of Toronto.
++ *	Written by Henry Spencer.  Not derived from licensed software.
++ *
++ *	Permission is granted to anyone to use this software for any
++ *	purpose on any computer system, and to redistribute it freely,
++ *	subject to the following restrictions:
++ *
++ *	1. The author is not responsible for the consequences of use of
++ *		this software, no matter how awful, even if they arise
++ *		from defects in it.
++ *
++ *	2. The origin of this software must not be misrepresented, either
++ *		by explicit claim or by omission.
++ *
++ *	3. Altered versions must be plainly marked as such, and must not
++ *		be misrepresented as being the original software.
++ *
++ *
++ * This code was modified by Ethan Sommer to work within the kernel
++ * (it now uses kmalloc etc..)
++ *
++ */
++#include "regexp.h"
++#include "regmagic.h"
++#include <linux/string.h>
++
++
++#ifndef CHARBITS
++#define	UCHARAT(p)	((int)*(unsigned char *)(p))
++#else
++#define	UCHARAT(p)	((int)*(p)&CHARBITS)
++#endif
++
++#if 0
++//void regerror(char * s)
++//{
++//        printk("regexp(3): %s", s);
++//        /* NOTREACHED */
++//}
++#endif
++
++/*
++ - regsub - perform substitutions after a regexp match
++ */
++void
++regsub(regexp * prog, char * source, char * dest)
++{
++	register char *src;
++	register char *dst;
++	register char c;
++	register int no;
++	register int len;
++	
++	/* Not necessary and gcc doesn't like it -MLS */
++	/*extern char *strncpy();*/
++
++	if (prog == NULL || source == NULL || dest == NULL) {
++		regerror("NULL parm to regsub");
++		return;
++	}
++	if (UCHARAT(prog->program) != MAGIC) {
++		regerror("damaged regexp fed to regsub");
++		return;
++	}
++
++	src = source;
++	dst = dest;
++	while ((c = *src++) != '\0') {
++		if (c == '&')
++			no = 0;
++		else if (c == '\\' && '0' <= *src && *src <= '9')
++			no = *src++ - '0';
++		else
++			no = -1;
++
++		if (no < 0) {	/* Ordinary character. */
++			if (c == '\\' && (*src == '\\' || *src == '&'))
++				c = *src++;
++			*dst++ = c;
++		} else if (prog->startp[no] != NULL && prog->endp[no] != NULL) {
++			len = prog->endp[no] - prog->startp[no];
++			(void) strncpy(dst, prog->startp[no], len);
++			dst += len;
++			if (len != 0 && *(dst-1) == '\0') {	/* strncpy hit NUL. */
++				regerror("damaged match string");
++				return;
++			}
++		}
++	}
++	*dst++ = '\0';
++}
+--- /dev/null
++++ b/net/netfilter/xt_layer7.c
+@@ -0,0 +1,666 @@
++/*
++  Kernel module to match application layer (OSI layer 7) data in connections.
++
++  http://l7-filter.sf.net
++
++  (C) 2003-2009 Matthew Strait and Ethan Sommer.
++
++  This program is free software; you can redistribute it and/or
++  modify it under the terms of the GNU General Public License
++  as published by the Free Software Foundation; either version
++  2 of the License, or (at your option) any later version.
++  http://www.gnu.org/licenses/gpl.txt
++
++  Based on ipt_string.c (C) 2000 Emmanuel Roger <winfield@freegates.be>,
++  xt_helper.c (C) 2002 Harald Welte and cls_layer7.c (C) 2003 Matthew Strait,
++  Ethan Sommer, Justin Levandoski.
++*/
++
++#include <linux/spinlock.h>
++#include <linux/version.h>
++#include <net/ip.h>
++#include <net/tcp.h>
++#include <linux/module.h>
++#include <linux/skbuff.h>
++#include <linux/netfilter.h>
++#include <net/netfilter/nf_conntrack.h>
++#include <net/netfilter/nf_conntrack_core.h>
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)
++#include <net/netfilter/nf_conntrack_extend.h>
++#include <net/netfilter/nf_conntrack_acct.h>
++#endif
++#include <linux/netfilter/x_tables.h>
++#include <linux/netfilter/xt_layer7.h>
++#include <linux/ctype.h>
++#include <linux/proc_fs.h>
++
++#include "regexp/regexp.c"
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Matthew Strait <quadong@users.sf.net>, Ethan Sommer <sommere@users.sf.net>");
++MODULE_DESCRIPTION("iptables application layer match module");
++MODULE_ALIAS("ipt_layer7");
++MODULE_VERSION("2.21");
++
++static int maxdatalen = 2048; // this is the default
++module_param(maxdatalen, int, 0444);
++MODULE_PARM_DESC(maxdatalen, "maximum bytes of data looked at by l7-filter");
++#ifdef CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG
++	#define DPRINTK(format,args...) printk(format,##args)
++#else
++	#define DPRINTK(format,args...)
++#endif
++
++/* Number of packets whose data we look at.
++This can be modified through /proc/net/layer7_numpackets */
++static int num_packets = 10;
++
++static struct pattern_cache {
++	char * regex_string;
++	regexp * pattern;
++	struct pattern_cache * next;
++} * first_pattern_cache = NULL;
++
++DEFINE_SPINLOCK(l7_lock);
++
++static int total_acct_packets(struct nf_conn *ct)
++{
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 26)
++	BUG_ON(ct == NULL);
++	return (ct->counters[IP_CT_DIR_ORIGINAL].packets + ct->counters[IP_CT_DIR_REPLY].packets);
++#else
++	struct nf_conn_counter *acct;
++
++	BUG_ON(ct == NULL);
++	acct = nf_conn_acct_find(ct);
++	if (!acct)
++		return 0;
++	return (acct[IP_CT_DIR_ORIGINAL].packets + acct[IP_CT_DIR_REPLY].packets);
++#endif
++}
++
++#ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG
++/* Converts an unfriendly string into a friendly one by
++replacing unprintables with periods and all whitespace with " ". */
++static char * friendly_print(unsigned char * s)
++{
++	char * f = kmalloc(strlen(s) + 1, GFP_ATOMIC);
++	int i;
++
++	if(!f) {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory in "
++					"friendly_print, bailing.\n");
++		return NULL;
++	}
++
++	for(i = 0; i < strlen(s); i++){
++		if(isprint(s[i]) && s[i] < 128)	f[i] = s[i];
++		else if(isspace(s[i]))		f[i] = ' ';
++		else 				f[i] = '.';
++	}
++	f[i] = '\0';
++	return f;
++}
++
++static char dec2hex(int i)
++{
++	switch (i) {
++		case 0 ... 9:
++			return (i + '0');
++			break;
++		case 10 ... 15:
++			return (i - 10 + 'a');
++			break;
++		default:
++			if (net_ratelimit())
++				printk("layer7: Problem in dec2hex\n");
++			return '\0';
++	}
++}
++
++static char * hex_print(unsigned char * s)
++{
++	char * g = kmalloc(strlen(s)*3 + 1, GFP_ATOMIC);
++	int i;
++
++	if(!g) {
++	       if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory in hex_print, "
++					"bailing.\n");
++	       return NULL;
++	}
++
++	for(i = 0; i < strlen(s); i++) {
++		g[i*3    ] = dec2hex(s[i]/16);
++		g[i*3 + 1] = dec2hex(s[i]%16);
++		g[i*3 + 2] = ' ';
++	}
++	g[i*3] = '\0';
++
++	return g;
++}
++#endif // DEBUG
++
++/* Use instead of regcomp.  As we expect to be seeing the same regexps over and
++over again, it make sense to cache the results. */
++static regexp * compile_and_cache(const char * regex_string, 
++                                  const char * protocol)
++{
++	struct pattern_cache * node               = first_pattern_cache;
++	struct pattern_cache * last_pattern_cache = first_pattern_cache;
++	struct pattern_cache * tmp;
++	unsigned int len;
++
++	while (node != NULL) {
++		if (!strcmp(node->regex_string, regex_string))
++		return node->pattern;
++
++		last_pattern_cache = node;/* points at the last non-NULL node */
++		node = node->next;
++	}
++
++	/* If we reach the end of the list, then we have not yet cached
++	   the pattern for this regex. Let's do that now.
++	   Be paranoid about running out of memory to avoid list corruption. */
++	tmp = kmalloc(sizeof(struct pattern_cache), GFP_ATOMIC);
++
++	if(!tmp) {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory in "
++					"compile_and_cache, bailing.\n");
++		return NULL;
++	}
++
++	tmp->regex_string  = kmalloc(strlen(regex_string) + 1, GFP_ATOMIC);
++	tmp->pattern       = kmalloc(sizeof(struct regexp),    GFP_ATOMIC);
++	tmp->next = NULL;
++
++	if(!tmp->regex_string || !tmp->pattern) {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory in "
++					"compile_and_cache, bailing.\n");
++		kfree(tmp->regex_string);
++		kfree(tmp->pattern);
++		kfree(tmp);
++		return NULL;
++	}
++
++	/* Ok.  The new node is all ready now. */
++	node = tmp;
++
++	if(first_pattern_cache == NULL) /* list is empty */
++		first_pattern_cache = node; /* make node the beginning */
++	else
++		last_pattern_cache->next = node; /* attach node to the end */
++
++	/* copy the string and compile the regex */
++	len = strlen(regex_string);
++	DPRINTK("About to compile this: \"%s\"\n", regex_string);
++	node->pattern = regcomp((char *)regex_string, &len);
++	if ( !node->pattern ) {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: Error compiling regexp "
++					"\"%s\" (%s)\n", 
++					regex_string, protocol);
++		/* pattern is now cached as NULL, so we won't try again. */
++	}
++
++	strcpy(node->regex_string, regex_string);
++	return node->pattern;
++}
++
++static int can_handle(const struct sk_buff *skb)
++{
++	if(!ip_hdr(skb)) /* not IP */
++		return 0;
++	if(ip_hdr(skb)->protocol != IPPROTO_TCP &&
++	   ip_hdr(skb)->protocol != IPPROTO_UDP &&
++	   ip_hdr(skb)->protocol != IPPROTO_ICMP)
++		return 0;
++	return 1;
++}
++
++/* Returns offset the into the skb->data that the application data starts */
++static int app_data_offset(const struct sk_buff *skb)
++{
++	/* In case we are ported somewhere (ebtables?) where ip_hdr(skb)
++	isn't set, this can be gotten from 4*(skb->data[0] & 0x0f) as well. */
++	int ip_hl = 4*ip_hdr(skb)->ihl;
++
++	if( ip_hdr(skb)->protocol == IPPROTO_TCP ) {
++		/* 12 == offset into TCP header for the header length field.
++		Can't get this with skb->h.th->doff because the tcphdr
++		struct doesn't get set when routing (this is confirmed to be
++		true in Netfilter as well as QoS.) */
++		int tcp_hl = 4*(skb->data[ip_hl + 12] >> 4);
++
++		return ip_hl + tcp_hl;
++	} else if( ip_hdr(skb)->protocol == IPPROTO_UDP  ) {
++		return ip_hl + 8; /* UDP header is always 8 bytes */
++	} else if( ip_hdr(skb)->protocol == IPPROTO_ICMP ) {
++		return ip_hl + 8; /* ICMP header is 8 bytes */
++	} else {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: tried to handle unknown "
++					"protocol!\n");
++		return ip_hl + 8; /* something reasonable */
++	}
++}
++
++/* handles whether there's a match when we aren't appending data anymore */
++static int match_no_append(struct nf_conn * conntrack, 
++                           struct nf_conn * master_conntrack, 
++                           enum ip_conntrack_info ctinfo,
++                           enum ip_conntrack_info master_ctinfo,
++                           const struct xt_layer7_info * info)
++{
++	/* If we're in here, throw the app data away */
++	if(master_conntrack->layer7.app_data != NULL) {
++
++	#ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG
++		if(!master_conntrack->layer7.app_proto) {
++			char * f = 
++			  friendly_print(master_conntrack->layer7.app_data);
++			char * g = 
++			  hex_print(master_conntrack->layer7.app_data);
++			DPRINTK("\nl7-filter gave up after %d bytes "
++				"(%d packets):\n%s\n",
++				strlen(f), total_acct_packets(master_conntrack), f);
++			kfree(f);
++			DPRINTK("In hex: %s\n", g);
++			kfree(g);
++		}
++	#endif
++
++		kfree(master_conntrack->layer7.app_data);
++		master_conntrack->layer7.app_data = NULL; /* don't free again */
++	}
++
++	if(master_conntrack->layer7.app_proto){
++		/* Here child connections set their .app_proto (for /proc) */
++		if(!conntrack->layer7.app_proto) {
++			conntrack->layer7.app_proto = 
++			  kmalloc(strlen(master_conntrack->layer7.app_proto)+1, 
++			    GFP_ATOMIC);
++			if(!conntrack->layer7.app_proto){
++				if (net_ratelimit())
++					printk(KERN_ERR "layer7: out of memory "
++							"in match_no_append, "
++							"bailing.\n");
++				return 1;
++			}
++			strcpy(conntrack->layer7.app_proto, 
++				master_conntrack->layer7.app_proto);
++		}
++
++		return (!strcmp(master_conntrack->layer7.app_proto, 
++				info->protocol));
++	}
++	else {
++		/* If not classified, set to "unknown" to distinguish from
++		connections that are still being tested. */
++		master_conntrack->layer7.app_proto = 
++			kmalloc(strlen("unknown")+1, GFP_ATOMIC);
++		if(!master_conntrack->layer7.app_proto){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: out of memory in "
++						"match_no_append, bailing.\n");
++			return 1;
++		}
++		strcpy(master_conntrack->layer7.app_proto, "unknown");
++		return 0;
++	}
++}
++
++/* add the new app data to the conntrack.  Return number of bytes added. */
++static int add_data(struct nf_conn * master_conntrack,
++                    char * app_data, int appdatalen)
++{
++	int length = 0, i;
++	int oldlength = master_conntrack->layer7.app_data_len;
++
++	/* This is a fix for a race condition by Deti Fliegl. However, I'm not 
++	   clear on whether the race condition exists or whether this really 
++	   fixes it.  I might just be being dense... Anyway, if it's not really 
++	   a fix, all it does is waste a very small amount of time. */
++	if(!master_conntrack->layer7.app_data) return 0;
++
++	/* Strip nulls. Make everything lower case (our regex lib doesn't
++	do case insensitivity).  Add it to the end of the current data. */
++	for(i = 0; i < maxdatalen-oldlength-1 &&
++		   i < appdatalen; i++) {
++		if(app_data[i] != '\0') {
++			/* the kernel version of tolower mungs 'upper ascii' */
++			master_conntrack->layer7.app_data[length+oldlength] =
++				isascii(app_data[i])? 
++					tolower(app_data[i]) : app_data[i];
++			length++;
++		}
++	}
++
++	master_conntrack->layer7.app_data[length+oldlength] = '\0';
++	master_conntrack->layer7.app_data_len = length + oldlength;
++
++	return length;
++}
++
++/* taken from drivers/video/modedb.c */
++static int my_atoi(const char *s)
++{
++	int val = 0;
++
++	for (;; s++) {
++		switch (*s) {
++			case '0'...'9':
++			val = 10*val+(*s-'0');
++			break;
++		default:
++			return val;
++		}
++	}
++}
++
++/* write out num_packets to userland. */
++static int layer7_read_proc(char* page, char ** start, off_t off, int count,
++                            int* eof, void * data)
++{
++	if(num_packets > 99 && net_ratelimit())
++		printk(KERN_ERR "layer7: NOT REACHED. num_packets too big\n");
++
++	page[0] = num_packets/10 + '0';
++	page[1] = num_packets%10 + '0';
++	page[2] = '\n';
++	page[3] = '\0';
++
++	*eof=1;
++
++	return 3;
++}
++
++/* Read in num_packets from userland */
++static int layer7_write_proc(struct file* file, const char* buffer,
++                             unsigned long count, void *data)
++{
++	char * foo = kmalloc(count, GFP_ATOMIC);
++
++	if(!foo){
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory, bailing. "
++					"num_packets unchanged.\n");
++		return count;
++	}
++
++	if(copy_from_user(foo, buffer, count)) {
++		return -EFAULT;
++	}
++
++
++	num_packets = my_atoi(foo);
++	kfree (foo);
++
++	/* This has an arbitrary limit to make the math easier. I'm lazy.
++	But anyway, 99 is a LOT! If you want more, you're doing it wrong! */
++	if(num_packets > 99) {
++		printk(KERN_WARNING "layer7: num_packets can't be > 99.\n");
++		num_packets = 99;
++	} else if(num_packets < 1) {
++		printk(KERN_WARNING "layer7: num_packets can't be < 1.\n");
++		num_packets = 1;
++	}
++
++	return count;
++}
++
++static bool
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++match(const struct sk_buff *skbin, const struct xt_match_param *par)
++#else
++match(const struct sk_buff *skbin,
++      const struct net_device *in,
++      const struct net_device *out,
++      const struct xt_match *match,
++      const void *matchinfo,
++      int offset,
++      unsigned int protoff,
++      bool *hotdrop)
++#endif
++{
++	/* sidestep const without getting a compiler warning... */
++	struct sk_buff * skb = (struct sk_buff *)skbin; 
++
++	const struct xt_layer7_info * info = 
++	#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++		par->matchinfo;
++	#else
++		matchinfo;
++	#endif
++
++	enum ip_conntrack_info master_ctinfo, ctinfo;
++	struct nf_conn *master_conntrack, *conntrack;
++	unsigned char * app_data;
++	unsigned int pattern_result, appdatalen;
++	regexp * comppattern;
++
++	/* Be paranoid/incompetent - lock the entire match function. */
++	spin_lock_bh(&l7_lock);
++
++	if(!can_handle(skb)){
++		DPRINTK("layer7: This is some protocol I can't handle.\n");
++		spin_unlock_bh(&l7_lock);
++		return info->invert;
++	}
++
++	/* Treat parent & all its children together as one connection, except
++	for the purpose of setting conntrack->layer7.app_proto in the actual
++	connection. This makes /proc/net/ip_conntrack more satisfying. */
++	if(!(conntrack = nf_ct_get(skb, &ctinfo)) ||
++	   !(master_conntrack=nf_ct_get(skb,&master_ctinfo))){
++		DPRINTK("layer7: couldn't get conntrack.\n");
++		spin_unlock_bh(&l7_lock);
++		return info->invert;
++	}
++
++	/* Try to get a master conntrack (and its master etc) for FTP, etc. */
++	while (master_ct(master_conntrack) != NULL)
++		master_conntrack = master_ct(master_conntrack);
++
++	/* if we've classified it or seen too many packets */
++	if(total_acct_packets(master_conntrack) > num_packets ||
++	   master_conntrack->layer7.app_proto) {
++
++		pattern_result = match_no_append(conntrack, master_conntrack, 
++						 ctinfo, master_ctinfo, info);
++
++		/* skb->cb[0] == seen. Don't do things twice if there are 
++		multiple l7 rules. I'm not sure that using cb for this purpose 
++		is correct, even though it says "put your private variables 
++		there". But it doesn't look like it is being used for anything
++		else in the skbs that make it here. */
++		skb->cb[0] = 1; /* marking it seen here's probably irrelevant */
++
++		spin_unlock_bh(&l7_lock);
++		return (pattern_result ^ info->invert);
++	}
++
++	if(skb_is_nonlinear(skb)){
++		if(skb_linearize(skb) != 0){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: failed to linearize "
++						"packet, bailing.\n");
++			spin_unlock_bh(&l7_lock);
++			return info->invert;
++		}
++	}
++
++	/* now that the skb is linearized, it's safe to set these. */
++	app_data = skb->data + app_data_offset(skb);
++	appdatalen = skb_tail_pointer(skb) - app_data;
++
++	/* the return value gets checked later, when we're ready to use it */
++	comppattern = compile_and_cache(info->pattern, info->protocol);
++
++	/* On the first packet of a connection, allocate space for app data */
++	if(total_acct_packets(master_conntrack) == 1 && !skb->cb[0] && 
++	   !master_conntrack->layer7.app_data){
++		master_conntrack->layer7.app_data = 
++			kmalloc(maxdatalen, GFP_ATOMIC);
++		if(!master_conntrack->layer7.app_data){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: out of memory in "
++						"match, bailing.\n");
++			spin_unlock_bh(&l7_lock);
++			return info->invert;
++		}
++
++		master_conntrack->layer7.app_data[0] = '\0';
++	}
++
++	/* Can be here, but unallocated, if numpackets is increased near
++	the beginning of a connection */
++	if(master_conntrack->layer7.app_data == NULL){
++		spin_unlock_bh(&l7_lock);
++		return info->invert; /* unmatched */
++	}
++
++	if(!skb->cb[0]){
++		int newbytes;
++		newbytes = add_data(master_conntrack, app_data, appdatalen);
++
++		if(newbytes == 0) { /* didn't add any data */
++			skb->cb[0] = 1;
++			/* Didn't match before, not going to match now */
++			spin_unlock_bh(&l7_lock);
++			return info->invert;
++		}
++	}
++
++	/* If looking for "unknown", then never match.  "Unknown" means that
++	we've given up; we're still trying with these packets. */
++	if(!strcmp(info->protocol, "unknown")) {
++		pattern_result = 0;
++	/* If looking for "unset", then always match. "Unset" means that we
++	haven't yet classified the connection. */
++	} else if(!strcmp(info->protocol, "unset")) {
++		pattern_result = 2;
++		DPRINTK("layer7: matched unset: not yet classified "
++			"(%d/%d packets)\n",
++                        total_acct_packets(master_conntrack), num_packets);
++	/* If the regexp failed to compile, don't bother running it */
++	} else if(comppattern && 
++		  regexec(comppattern, master_conntrack->layer7.app_data)){
++		DPRINTK("layer7: matched %s\n", info->protocol);
++		pattern_result = 1;
++	} else pattern_result = 0;
++
++	if(pattern_result == 1) {
++		master_conntrack->layer7.app_proto = 
++			kmalloc(strlen(info->protocol)+1, GFP_ATOMIC);
++		if(!master_conntrack->layer7.app_proto){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: out of memory in "
++						"match, bailing.\n");
++			spin_unlock_bh(&l7_lock);
++			return (pattern_result ^ info->invert);
++		}
++		strcpy(master_conntrack->layer7.app_proto, info->protocol);
++	} else if(pattern_result > 1) { /* cleanup from "unset" */
++		pattern_result = 1;
++	}
++
++	/* mark the packet seen */
++	skb->cb[0] = 1;
++
++	spin_unlock_bh(&l7_lock);
++	return (pattern_result ^ info->invert);
++}
++
++// load nf_conntrack_ipv4
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++static bool check(const struct xt_mtchk_param *par)
++{
++        if (nf_ct_l3proto_try_module_get(par->match->family) < 0) {
++                printk(KERN_WARNING "can't load conntrack support for "
++                                    "proto=%d\n", par->match->family);
++#else
++static bool check(const char *tablename, const void *inf,
++		 const struct xt_match *match, void *matchinfo,
++		 unsigned int hook_mask)
++{
++        if (nf_ct_l3proto_try_module_get(match->family) < 0) {
++                printk(KERN_WARNING "can't load conntrack support for "
++                                    "proto=%d\n", match->family);
++#endif
++                return 0;
++        }
++	return 1;
++}
++
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++	static void destroy(const struct xt_mtdtor_param *par)
++	{
++		nf_ct_l3proto_module_put(par->match->family);
++	}
++#else
++	static void destroy(const struct xt_match *match, void *matchinfo)
++	{
++		nf_ct_l3proto_module_put(match->family);
++	}
++#endif
++
++static struct xt_match xt_layer7_match[] __read_mostly = {
++{
++	.name		= "layer7",
++	.family		= AF_INET,
++	.checkentry	= check,
++	.match		= match,
++	.destroy	= destroy,
++	.matchsize	= sizeof(struct xt_layer7_info),
++	.me		= THIS_MODULE
++}
++};
++
++static void layer7_cleanup_proc(void)
++{
++	remove_proc_entry("layer7_numpackets", init_net.proc_net);
++}
++
++/* register the proc file */
++static void layer7_init_proc(void)
++{
++	struct proc_dir_entry* entry;
++	entry = create_proc_entry("layer7_numpackets", 0644, init_net.proc_net);
++	entry->read_proc = layer7_read_proc;
++	entry->write_proc = layer7_write_proc;
++}
++
++static int __init xt_layer7_init(void)
++{
++	need_conntrack();
++
++	layer7_init_proc();
++	if(maxdatalen < 1) {
++		printk(KERN_WARNING "layer7: maxdatalen can't be < 1, "
++			"using 1\n");
++		maxdatalen = 1;
++	}
++	/* This is not a hard limit.  It's just here to prevent people from
++	bringing their slow machines to a grinding halt. */
++	else if(maxdatalen > 65536) {
++		printk(KERN_WARNING "layer7: maxdatalen can't be > 65536, "
++			"using 65536\n");
++		maxdatalen = 65536;
++	}
++	return xt_register_matches(xt_layer7_match,
++				   ARRAY_SIZE(xt_layer7_match));
++}
++
++static void __exit xt_layer7_fini(void)
++{
++	layer7_cleanup_proc();
++	xt_unregister_matches(xt_layer7_match, ARRAY_SIZE(xt_layer7_match));
++}
++
++module_init(xt_layer7_init);
++module_exit(xt_layer7_fini);
diff --git a/target/linux/generic/patches-2.6.32/101-netfilter_layer7_pktmatch.patch b/target/linux/generic/patches-2.6.32/101-netfilter_layer7_pktmatch.patch
new file mode 100644
index 0000000000..f65e301fd1
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/101-netfilter_layer7_pktmatch.patch
@@ -0,0 +1,108 @@
+--- a/include/linux/netfilter/xt_layer7.h
++++ b/include/linux/netfilter/xt_layer7.h
+@@ -8,6 +8,7 @@ struct xt_layer7_info {
+     char protocol[MAX_PROTOCOL_LEN];
+     char pattern[MAX_PATTERN_LEN];
+     u_int8_t invert;
++    u_int8_t pkt;
+ };
+ 
+ #endif /* _XT_LAYER7_H */
+--- a/net/netfilter/xt_layer7.c
++++ b/net/netfilter/xt_layer7.c
+@@ -314,33 +314,35 @@ static int match_no_append(struct nf_con
+ }
+ 
+ /* add the new app data to the conntrack.  Return number of bytes added. */
+-static int add_data(struct nf_conn * master_conntrack,
+-                    char * app_data, int appdatalen)
++static int add_datastr(char *target, int offset, char *app_data, int len)
+ {
+ 	int length = 0, i;
+-	int oldlength = master_conntrack->layer7.app_data_len;
+-
+-	/* This is a fix for a race condition by Deti Fliegl. However, I'm not 
+-	   clear on whether the race condition exists or whether this really 
+-	   fixes it.  I might just be being dense... Anyway, if it's not really 
+-	   a fix, all it does is waste a very small amount of time. */
+-	if(!master_conntrack->layer7.app_data) return 0;
++	if (!target) return 0;
+ 
+ 	/* Strip nulls. Make everything lower case (our regex lib doesn't
+ 	do case insensitivity).  Add it to the end of the current data. */
+-	for(i = 0; i < maxdatalen-oldlength-1 &&
+-		   i < appdatalen; i++) {
++ 	for(i = 0; i < maxdatalen-offset-1 && i < len; i++) {
+ 		if(app_data[i] != '\0') {
+ 			/* the kernel version of tolower mungs 'upper ascii' */
+-			master_conntrack->layer7.app_data[length+oldlength] =
++			target[length+offset] =
+ 				isascii(app_data[i])? 
+ 					tolower(app_data[i]) : app_data[i];
+ 			length++;
+ 		}
+ 	}
++	target[length+offset] = '\0';
++
++	return length;
++}
++
++/* add the new app data to the conntrack.  Return number of bytes added. */
++static int add_data(struct nf_conn * master_conntrack,
++                    char * app_data, int appdatalen)
++{
++	int length;
+ 
+-	master_conntrack->layer7.app_data[length+oldlength] = '\0';
+-	master_conntrack->layer7.app_data_len = length + oldlength;
++	length = add_datastr(master_conntrack->layer7.app_data, master_conntrack->layer7.app_data_len, app_data, appdatalen);
++	master_conntrack->layer7.app_data_len += length;
+ 
+ 	return length;
+ }
+@@ -438,7 +440,7 @@ match(const struct sk_buff *skbin,
+ 
+ 	enum ip_conntrack_info master_ctinfo, ctinfo;
+ 	struct nf_conn *master_conntrack, *conntrack;
+-	unsigned char * app_data;
++	unsigned char *app_data, *tmp_data;
+ 	unsigned int pattern_result, appdatalen;
+ 	regexp * comppattern;
+ 
+@@ -466,8 +468,8 @@ match(const struct sk_buff *skbin,
+ 		master_conntrack = master_ct(master_conntrack);
+ 
+ 	/* if we've classified it or seen too many packets */
+-	if(total_acct_packets(master_conntrack) > num_packets ||
+-	   master_conntrack->layer7.app_proto) {
++	if(!info->pkt && (total_acct_packets(master_conntrack) > num_packets ||
++	   master_conntrack->layer7.app_proto)) {
+ 
+ 		pattern_result = match_no_append(conntrack, master_conntrack, 
+ 						 ctinfo, master_ctinfo, info);
+@@ -500,6 +502,25 @@ match(const struct sk_buff *skbin,
+ 	/* the return value gets checked later, when we're ready to use it */
+ 	comppattern = compile_and_cache(info->pattern, info->protocol);
+ 
++	if (info->pkt) {
++		tmp_data = kmalloc(maxdatalen, GFP_ATOMIC);
++		if(!tmp_data){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: out of memory in match, bailing.\n");
++			return info->invert;
++		}
++
++		tmp_data[0] = '\0';
++		add_datastr(tmp_data, 0, app_data, appdatalen);
++		pattern_result = ((comppattern && regexec(comppattern, tmp_data)) ? 1 : 0);
++
++		kfree(tmp_data);
++		tmp_data = NULL;
++		spin_unlock_bh(&l7_lock);
++
++		return (pattern_result ^ info->invert);
++	}
++
+ 	/* On the first packet of a connection, allocate space for app data */
+ 	if(total_acct_packets(master_conntrack) == 1 && !skb->cb[0] && 
+ 	   !master_conntrack->layer7.app_data){
diff --git a/target/linux/generic/patches-2.6.32/110-netfilter_match_speedup.patch b/target/linux/generic/patches-2.6.32/110-netfilter_match_speedup.patch
new file mode 100644
index 0000000000..a9eb1089f5
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/110-netfilter_match_speedup.patch
@@ -0,0 +1,144 @@
+--- a/include/linux/netfilter_ipv4/ip_tables.h
++++ b/include/linux/netfilter_ipv4/ip_tables.h
+@@ -62,6 +62,7 @@ struct ipt_ip {
+ #define IPT_F_FRAG		0x01	/* Set if rule is a fragment rule */
+ #define IPT_F_GOTO		0x02	/* Set if jump is a goto */
+ #define IPT_F_MASK		0x03	/* All possible flag bits mask. */
++#define IPT_F_NO_DEF_MATCH	0x80	/* Internal: no default match rules present */
+ 
+ /* Values for "inv" field in struct ipt_ip. */
+ #define IPT_INV_VIA_IN		0x01	/* Invert the sense of IN IFACE. */
+--- a/net/ipv4/netfilter/ip_tables.c
++++ b/net/ipv4/netfilter/ip_tables.c
+@@ -88,6 +88,9 @@ ip_packet_match(const struct iphdr *ip,
+ 
+ #define FWINV(bool, invflg) ((bool) ^ !!(ipinfo->invflags & (invflg)))
+ 
++	if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
++		return true;
++
+ 	if (FWINV((ip->saddr&ipinfo->smsk.s_addr) != ipinfo->src.s_addr,
+ 		  IPT_INV_SRCIP)
+ 	    || FWINV((ip->daddr&ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr,
+@@ -138,13 +141,35 @@ ip_packet_match(const struct iphdr *ip,
+ 		return false;
+ 	}
+ 
++#undef FWINV
+ 	return true;
+ }
+ 
+ static bool
+-ip_checkentry(const struct ipt_ip *ip)
++ip_checkentry(struct ipt_ip *ip)
+ {
+-	if (ip->flags & ~IPT_F_MASK) {
++#define FWINV(bool, invflg) ((bool) || (ip->invflags & (invflg)))
++
++	if (FWINV(ip->smsk.s_addr, IPT_INV_SRCIP) ||
++		FWINV(ip->dmsk.s_addr, IPT_INV_DSTIP))
++		goto has_match_rules;
++
++	if (FWINV(!!((const unsigned long *)ip->iniface_mask)[0],
++		IPT_INV_VIA_IN) ||
++	    FWINV(!!((const unsigned long *)ip->outiface_mask)[0],
++		IPT_INV_VIA_OUT))
++		goto has_match_rules;
++
++	if (FWINV(ip->proto, IPT_INV_PROTO))
++		goto has_match_rules;
++
++	if (FWINV(ip->flags&IPT_F_FRAG, IPT_INV_FRAG))
++		goto has_match_rules;
++
++	ip->flags |= IPT_F_NO_DEF_MATCH;
++
++has_match_rules:
++	if (ip->flags & ~(IPT_F_MASK|IPT_F_NO_DEF_MATCH)) {
+ 		duprintf("Unknown flag bits set: %08X\n",
+ 			 ip->flags & ~IPT_F_MASK);
+ 		return false;
+@@ -154,6 +179,8 @@ ip_checkentry(const struct ipt_ip *ip)
+ 			 ip->invflags & ~IPT_INV_MASK);
+ 		return false;
+ 	}
++
++#undef FWINV
+ 	return true;
+ }
+ 
+@@ -196,7 +223,6 @@ static inline bool unconditional(const s
+ 	static const struct ipt_ip uncond;
+ 
+ 	return memcmp(ip, &uncond, sizeof(uncond)) == 0;
+-#undef FWINV
+ }
+ 
+ #if defined(CONFIG_NETFILTER_XT_TARGET_TRACE) || \
+@@ -321,8 +347,28 @@ ipt_do_table(struct sk_buff *skb,
+ 	struct xt_match_param mtpar;
+ 	struct xt_target_param tgpar;
+ 
+-	/* Initialization */
+ 	ip = ip_hdr(skb);
++
++	IP_NF_ASSERT(table->valid_hooks & (1 << hook));
++	xt_info_rdlock_bh();
++	private = table->private;
++	table_base = private->entries[smp_processor_id()];
++	e = get_entry(table_base, private->hook_entry[hook]);
++
++	if (e->target_offset <= sizeof(struct ipt_entry) &&
++		(e->ip.flags & IPT_F_NO_DEF_MATCH)) {
++			struct ipt_entry_target *t = ipt_get_target(e);
++			if (!t->u.kernel.target->target) {
++				int v = ((struct ipt_standard_target *)t)->verdict;
++				if ((v < 0) && (v != IPT_RETURN)) {
++					ADD_COUNTER(e->counters, ntohs(ip->tot_len), 1);
++					xt_info_rdunlock_bh();
++					return (unsigned)(-v) - 1;
++				}
++			}
++	}
++
++	/* Initialization */
+ 	indev = in ? in->name : nulldevname;
+ 	outdev = out ? out->name : nulldevname;
+ 	/* We handle fragments by dealing with the first fragment as
+@@ -339,13 +385,6 @@ ipt_do_table(struct sk_buff *skb,
+ 	mtpar.family  = tgpar.family = NFPROTO_IPV4;
+ 	mtpar.hooknum = tgpar.hooknum = hook;
+ 
+-	IP_NF_ASSERT(table->valid_hooks & (1 << hook));
+-	xt_info_rdlock_bh();
+-	private = table->private;
+-	table_base = private->entries[smp_processor_id()];
+-
+-	e = get_entry(table_base, private->hook_entry[hook]);
+-
+ 	/* For return from builtin chain */
+ 	back = get_entry(table_base, private->underflow[hook]);
+ 
+@@ -992,6 +1031,7 @@ copy_entries_to_user(unsigned int total_
+ 		unsigned int i;
+ 		const struct ipt_entry_match *m;
+ 		const struct ipt_entry_target *t;
++		u8 flags;
+ 
+ 		e = (struct ipt_entry *)(loc_cpu_entry + off);
+ 		if (copy_to_user(userptr + off
+@@ -1002,6 +1042,14 @@ copy_entries_to_user(unsigned int total_
+ 			goto free_counters;
+ 		}
+ 
++		flags = e->ip.flags & ~IPT_F_NO_DEF_MATCH;
++		if (copy_to_user(userptr + off
++				 + offsetof(struct ipt_entry, ip.flags),
++				 &flags, sizeof(flags)) != 0) {
++			ret = -EFAULT;
++			goto free_counters;
++		}
++
+ 		for (i = sizeof(struct ipt_entry);
+ 		     i < e->target_offset;
+ 		     i += m->u.match_size) {
diff --git a/target/linux/generic/patches-2.6.32/150-netfilter_imq.patch b/target/linux/generic/patches-2.6.32/150-netfilter_imq.patch
new file mode 100644
index 0000000000..9540ce0dde
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/150-netfilter_imq.patch
@@ -0,0 +1,1336 @@
+--- /dev/null
++++ b/drivers/net/imq.c
+@@ -0,0 +1,632 @@
++/*
++ *             Pseudo-driver for the intermediate queue device.
++ *
++ *             This program is free software; you can redistribute it and/or
++ *             modify it under the terms of the GNU General Public License
++ *             as published by the Free Software Foundation; either version
++ *             2 of the License, or (at your option) any later version.
++ *
++ * Authors:    Patrick McHardy, <kaber@trash.net>
++ *
++ *            The first version was written by Martin Devera, <devik@cdi.cz>
++ *
++ * Credits:    Jan Rafaj <imq2t@cedric.vabo.cz>
++ *              - Update patch to 2.4.21
++ *             Sebastian Strollo <sstrollo@nortelnetworks.com>
++ *              - Fix "Dead-loop on netdevice imq"-issue
++ *             Marcel Sebek <sebek64@post.cz>
++ *              - Update to 2.6.2-rc1
++ *
++ *	       After some time of inactivity there is a group taking care
++ *	       of IMQ again: http://www.linuximq.net
++ *
++ *
++ *	       2004/06/30 - New version of IMQ patch to kernels <=2.6.7
++ *             including the following changes:
++ *
++ *	       - Correction of ipv6 support "+"s issue (Hasso Tepper)
++ *	       - Correction of imq_init_devs() issue that resulted in
++ *	       kernel OOPS unloading IMQ as module (Norbert Buchmuller)
++ *	       - Addition of functionality to choose number of IMQ devices
++ *	       during kernel config (Andre Correa)
++ *	       - Addition of functionality to choose how IMQ hooks on
++ *	       PRE and POSTROUTING (after or before NAT) (Andre Correa)
++ *	       - Cosmetic corrections (Norbert Buchmuller) (Andre Correa)
++ *
++ *
++ *             2005/12/16 - IMQ versions between 2.6.7 and 2.6.13 were
++ *             released with almost no problems. 2.6.14-x was released
++ *             with some important changes: nfcache was removed; After
++ *             some weeks of trouble we figured out that some IMQ fields
++ *             in skb were missing in skbuff.c - skb_clone and copy_skb_header.
++ *             These functions are correctly patched by this new patch version.
++ *
++ *             Thanks for all who helped to figure out all the problems with
++ *             2.6.14.x: Patrick McHardy, Rune Kock, VeNoMouS, Max CtRiX,
++ *             Kevin Shanahan, Richard Lucassen, Valery Dachev (hopefully
++ *             I didn't forget anybody). I apologize again for my lack of time.
++ *
++ *
++ *             2008/06/17 - 2.6.25 - Changed imq.c to use qdisc_run() instead 
++ *             of qdisc_restart() and moved qdisc_run() to tasklet to avoid
++ *             recursive locking. New initialization routines to fix 'rmmod' not
++ *             working anymore. Used code from ifb.c. (Jussi Kivilinna)
++ *
++ *             2008/08/06 - 2.6.26 - (JK)
++ *              - Replaced tasklet with 'netif_schedule()'.
++ *              - Cleaned up and added comments for imq_nf_queue().
++ *
++ *             2009/04/12
++ *              - Add skb_save_cb/skb_restore_cb helper functions for backuping
++ *                control buffer. This is needed because qdisc-layer on kernels
++ *                2.6.27 and newer overwrite control buffer. (Jussi Kivilinna)
++ *              - Add better locking for IMQ device. Hopefully this will solve
++ *                SMP issues. (Jussi Kivilinna)
++ *              - Port to 2.6.27
++ *              - Port to 2.6.28
++ *              - Port to 2.6.29 + fix rmmod not working
++ *
++ *             2009/04/20 - (Jussi Kivilinna)
++ *              - Use netdevice feature flags to avoid extra packet handling
++ *                by core networking layer and possibly increase performance.
++ *
++ *             2009/09/26 - (Jussi Kivilinna)
++ *              - Add imq_nf_reinject_lockless to fix deadlock with
++ *                imq_nf_queue/imq_nf_reinject.
++ *
++ *             2009/12/08 - (Jussi Kivilinna)
++ *              - Port to 2.6.32
++ *              - Add check for skb->nf_queue_entry==NULL in imq_dev_xmit()
++ *              - Also add better error checking for skb->nf_queue_entry usage
++ *
++ *	       Also, many thanks to pablo Sebastian Greco for making the initial
++ *	       patch and to those who helped the testing.
++ *
++ *             More info at: http://www.linuximq.net/ (Andre Correa)
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/moduleparam.h>
++#include <linux/list.h>
++#include <linux/skbuff.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/rtnetlink.h>
++#include <linux/if_arp.h>
++#include <linux/netfilter.h>
++#include <linux/netfilter_ipv4.h>
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++	#include <linux/netfilter_ipv6.h>
++#endif
++#include <linux/imq.h>
++#include <net/pkt_sched.h>
++#include <net/netfilter/nf_queue.h>
++
++static nf_hookfn imq_nf_hook;
++
++static struct nf_hook_ops imq_ingress_ipv4 = {
++	.hook		= imq_nf_hook,
++	.owner		= THIS_MODULE,
++	.pf		= PF_INET,
++	.hooknum	= NF_INET_PRE_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++	.priority	= NF_IP_PRI_MANGLE + 1
++#else
++	.priority	= NF_IP_PRI_NAT_DST + 1
++#endif
++};
++
++static struct nf_hook_ops imq_egress_ipv4 = {
++	.hook		= imq_nf_hook,
++	.owner		= THIS_MODULE,
++	.pf		= PF_INET,
++	.hooknum	= NF_INET_POST_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_AA) || defined(CONFIG_IMQ_BEHAVIOR_BA)
++	.priority	= NF_IP_PRI_LAST
++#else
++	.priority	= NF_IP_PRI_NAT_SRC - 1
++#endif
++};
++
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++static struct nf_hook_ops imq_ingress_ipv6 = {
++	.hook		= imq_nf_hook,
++	.owner		= THIS_MODULE,
++	.pf		= PF_INET6,
++	.hooknum	= NF_INET_PRE_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++	.priority	= NF_IP6_PRI_MANGLE + 1
++#else
++	.priority	= NF_IP6_PRI_NAT_DST + 1
++#endif
++};
++
++static struct nf_hook_ops imq_egress_ipv6 = {
++	.hook		= imq_nf_hook,
++	.owner		= THIS_MODULE,
++	.pf		= PF_INET6,
++	.hooknum	= NF_INET_POST_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_AA) || defined(CONFIG_IMQ_BEHAVIOR_BA)
++	.priority	= NF_IP6_PRI_LAST
++#else
++	.priority	= NF_IP6_PRI_NAT_SRC - 1
++#endif
++};
++#endif
++
++#if defined(CONFIG_IMQ_NUM_DEVS)
++static unsigned int numdevs = CONFIG_IMQ_NUM_DEVS;
++#else
++static unsigned int numdevs = IMQ_MAX_DEVS;
++#endif
++
++static DEFINE_SPINLOCK(imq_nf_queue_lock);
++
++static struct net_device *imq_devs_cache[IMQ_MAX_DEVS];
++
++
++static struct net_device_stats *imq_get_stats(struct net_device *dev)
++{
++	return &dev->stats;
++}
++
++/* called for packets kfree'd in qdiscs at places other than enqueue */
++static void imq_skb_destructor(struct sk_buff *skb)
++{
++	struct nf_queue_entry *entry = skb->nf_queue_entry;
++
++	skb->nf_queue_entry = NULL;
++
++	if (entry) {
++		nf_queue_entry_release_refs(entry);
++		kfree(entry);
++	}
++
++	skb_restore_cb(skb); /* kfree backup */
++}
++
++/* locking not needed when called from imq_nf_queue */
++static void imq_nf_reinject_lockless(struct nf_queue_entry *entry,
++						unsigned int verdict)
++{
++	int status;
++
++	if (!entry->next_outfn) {
++		nf_reinject(entry, verdict);
++		return;
++	}
++
++	status = entry->next_outfn(entry, entry->next_queuenum);
++	if (status < 0) {
++		nf_queue_entry_release_refs(entry);
++		kfree_skb(entry->skb);
++		kfree(entry);
++	}
++}
++
++static void imq_nf_reinject(struct nf_queue_entry *entry, unsigned int verdict)
++{
++	int status;
++
++	if (!entry->next_outfn) {
++		spin_lock_bh(&imq_nf_queue_lock);
++		nf_reinject(entry, verdict);
++		spin_unlock_bh(&imq_nf_queue_lock);
++		return;
++	}
++
++	rcu_read_lock();
++	local_bh_disable();
++	status = entry->next_outfn(entry, entry->next_queuenum);
++	local_bh_enable();
++	if (status < 0) {
++		nf_queue_entry_release_refs(entry);
++		kfree_skb(entry->skb);
++		kfree(entry);
++	}
++
++	rcu_read_unlock();
++}
++
++static netdev_tx_t imq_dev_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++	struct nf_queue_entry *entry = skb->nf_queue_entry;
++
++	skb->nf_queue_entry = NULL;
++	dev->trans_start = jiffies;
++
++	dev->stats.tx_bytes += skb->len;
++	dev->stats.tx_packets++;
++
++	if (entry == NULL) {
++		/* We don't know what is going on here.. packet is queued for
++		 * imq device, but (probably) not by us.
++		 *
++		 * If this packet was not send here by imq_nf_queue(), then
++		 * skb_save_cb() was not used and skb_free() should not show:
++		 *   WARNING: IMQ: kfree_skb: skb->cb_next:..
++		 * and/or
++		 *   WARNING: IMQ: kfree_skb: skb->nf_queue_entry...
++		 *
++		 * However if this message is shown, then IMQ is somehow broken
++		 * and you should report this to linuximq.net.
++		 */
++
++		/* imq_dev_xmit is black hole that eats all packets, report that
++		 * we eat this packet happily and increase dropped counters.
++		 */
++
++		dev->stats.tx_dropped++;
++		dev_kfree_skb(skb);
++
++		return NETDEV_TX_OK;
++	}
++
++	skb_restore_cb(skb); /* restore skb->cb */
++
++	skb->imq_flags = 0;
++	skb->destructor = NULL;
++
++	imq_nf_reinject(entry, NF_ACCEPT);
++
++	return NETDEV_TX_OK;
++}
++
++static int imq_nf_queue(struct nf_queue_entry *entry, unsigned queue_num)
++{
++	struct net_device *dev;
++	struct sk_buff *skb_orig, *skb, *skb_shared;
++	struct Qdisc *q;
++	struct netdev_queue *txq;
++	int users, index;
++	int retval = -EINVAL;
++
++	index = entry->skb->imq_flags & IMQ_F_IFMASK;
++	if (unlikely(index > numdevs - 1)) {
++		if (net_ratelimit())
++			printk(KERN_WARNING
++			       "IMQ: invalid device specified, highest is %u\n",
++			       numdevs - 1);
++		retval = -EINVAL;
++		goto out;
++	}
++
++	/* check for imq device by index from cache */
++	dev = imq_devs_cache[index];
++	if (unlikely(!dev)) {
++		char buf[8];
++
++		/* get device by name and cache result */
++		snprintf(buf, sizeof(buf), "imq%d", index);
++		dev = dev_get_by_name(&init_net, buf);
++		if (!dev) {
++			/* not found ?!*/
++			BUG();
++			retval = -ENODEV;
++			goto out;
++		}
++
++		imq_devs_cache[index] = dev;
++		dev_put(dev);
++	}
++
++	if (unlikely(!(dev->flags & IFF_UP))) {
++		entry->skb->imq_flags = 0;
++		imq_nf_reinject_lockless(entry, NF_ACCEPT);
++		retval = 0;
++		goto out;
++	}
++	dev->last_rx = jiffies;
++
++	skb = entry->skb;
++	skb_orig = NULL;
++
++	/* skb has owner? => make clone */
++	if (unlikely(skb->destructor)) {
++		skb_orig = skb;
++		skb = skb_clone(skb, GFP_ATOMIC);
++		if (!skb) {
++			retval = -ENOMEM;
++			goto out;
++		}
++		entry->skb = skb;
++	}
++
++	skb->nf_queue_entry = entry;
++
++	dev->stats.rx_bytes += skb->len;
++	dev->stats.rx_packets++;
++
++	txq = dev_pick_tx(dev, skb);
++
++	q = rcu_dereference(txq->qdisc);
++	if (unlikely(!q->enqueue))
++		goto packet_not_eaten_by_imq_dev;
++
++	spin_lock_bh(qdisc_lock(q));
++
++	users = atomic_read(&skb->users);
++
++	skb_shared = skb_get(skb); /* increase reference count by one */
++	skb_save_cb(skb_shared); /* backup skb->cb, as qdisc layer will
++					overwrite it */
++	qdisc_enqueue_root(skb_shared, q); /* might kfree_skb */
++
++	if (likely(atomic_read(&skb_shared->users) == users + 1)) {
++		kfree_skb(skb_shared); /* decrease reference count by one */
++
++		skb->destructor = &imq_skb_destructor;
++
++		/* cloned? */
++		if (skb_orig)
++			kfree_skb(skb_orig); /* free original */
++
++		spin_unlock_bh(qdisc_lock(q));
++
++		/* schedule qdisc dequeue */
++		__netif_schedule(q);
++
++		retval = 0;
++		goto out;
++	} else {
++		skb_restore_cb(skb_shared); /* restore skb->cb */
++		skb->nf_queue_entry = NULL;
++		/* qdisc dropped packet and decreased skb reference count of
++		 * skb, so we don't really want to and try refree as that would
++		 * actually destroy the skb. */
++		spin_unlock_bh(qdisc_lock(q));
++		goto packet_not_eaten_by_imq_dev;
++	}
++
++packet_not_eaten_by_imq_dev:
++	/* cloned? restore original */
++	if (skb_orig) {
++		kfree_skb(skb);
++		entry->skb = skb_orig;
++	}
++	retval = -1;
++out:
++	return retval;
++}
++
++static struct nf_queue_handler nfqh = {
++	.name  = "imq",
++	.outfn = imq_nf_queue,
++};
++
++static unsigned int imq_nf_hook(unsigned int hook, struct sk_buff *pskb,
++				const struct net_device *indev,
++				const struct net_device *outdev,
++				int (*okfn)(struct sk_buff *))
++{
++	if (pskb->imq_flags & IMQ_F_ENQUEUE)
++		return NF_QUEUE;
++
++	return NF_ACCEPT;
++}
++
++static int imq_close(struct net_device *dev)
++{
++	netif_stop_queue(dev);
++	return 0;
++}
++
++static int imq_open(struct net_device *dev)
++{
++	netif_start_queue(dev);
++	return 0;
++}
++
++static const struct net_device_ops imq_netdev_ops = {
++	.ndo_open		= imq_open,
++	.ndo_stop		= imq_close,
++	.ndo_start_xmit		= imq_dev_xmit,
++	.ndo_get_stats		= imq_get_stats,
++};
++
++static void imq_setup(struct net_device *dev)
++{
++	dev->netdev_ops		= &imq_netdev_ops;
++	dev->type               = ARPHRD_VOID;
++	dev->mtu                = 16000;
++	dev->tx_queue_len       = 11000;
++	dev->flags              = IFF_NOARP;
++	dev->features           = NETIF_F_SG | NETIF_F_FRAGLIST |
++				  NETIF_F_GSO | NETIF_F_HW_CSUM |
++				  NETIF_F_HIGHDMA;
++	dev->priv_flags		&= ~IFF_XMIT_DST_RELEASE;
++}
++
++static int imq_validate(struct nlattr *tb[], struct nlattr *data[])
++{
++	int ret = 0;
++
++	if (tb[IFLA_ADDRESS]) {
++		if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN) {
++			ret = -EINVAL;
++			goto end;
++		}
++		if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS]))) {
++			ret = -EADDRNOTAVAIL;
++			goto end;
++		}
++	}
++	return 0;
++end:
++	printk(KERN_WARNING "IMQ: imq_validate failed (%d)\n", ret);
++	return ret;
++}
++
++static struct rtnl_link_ops imq_link_ops __read_mostly = {
++	.kind		= "imq",
++	.priv_size	= 0,
++	.setup		= imq_setup,
++	.validate	= imq_validate,
++};
++
++static int __init imq_init_hooks(void)
++{
++	int err;
++
++	nf_register_queue_imq_handler(&nfqh);
++
++	err = nf_register_hook(&imq_ingress_ipv4);
++	if (err)
++		goto err1;
++
++	err = nf_register_hook(&imq_egress_ipv4);
++	if (err)
++		goto err2;
++
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++	err = nf_register_hook(&imq_ingress_ipv6);
++	if (err)
++		goto err3;
++
++	err = nf_register_hook(&imq_egress_ipv6);
++	if (err)
++		goto err4;
++#endif
++
++	return 0;
++
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++err4:
++	nf_unregister_hook(&imq_ingress_ipv6);
++err3:
++	nf_unregister_hook(&imq_egress_ipv4);
++#endif
++err2:
++	nf_unregister_hook(&imq_ingress_ipv4);
++err1:
++	nf_unregister_queue_imq_handler();
++	return err;
++}
++
++static int __init imq_init_one(int index)
++{
++	struct net_device *dev;
++	int ret;
++
++	dev = alloc_netdev(0, "imq%d", imq_setup);
++	if (!dev)
++		return -ENOMEM;
++
++	ret = dev_alloc_name(dev, dev->name);
++	if (ret < 0)
++		goto fail;
++
++	dev->rtnl_link_ops = &imq_link_ops;
++	ret = register_netdevice(dev);
++	if (ret < 0)
++		goto fail;
++
++	return 0;
++fail:
++	free_netdev(dev);
++	return ret;
++}
++
++static int __init imq_init_devs(void)
++{
++	int err, i;
++
++	if (numdevs < 1 || numdevs > IMQ_MAX_DEVS) {
++		printk(KERN_ERR "IMQ: numdevs has to be betweed 1 and %u\n",
++		       IMQ_MAX_DEVS);
++		return -EINVAL;
++	}
++
++	rtnl_lock();
++	err = __rtnl_link_register(&imq_link_ops);
++
++	for (i = 0; i < numdevs && !err; i++)
++		err = imq_init_one(i);
++
++	if (err) {
++		__rtnl_link_unregister(&imq_link_ops);
++		memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
++	}
++	rtnl_unlock();
++
++	return err;
++}
++
++static int __init imq_init_module(void)
++{
++	int err;
++
++#if defined(CONFIG_IMQ_NUM_DEVS)
++	BUILD_BUG_ON(CONFIG_IMQ_NUM_DEVS > 16);
++	BUILD_BUG_ON(CONFIG_IMQ_NUM_DEVS < 2);
++	BUILD_BUG_ON(CONFIG_IMQ_NUM_DEVS - 1 > IMQ_F_IFMASK);
++#endif
++
++	err = imq_init_devs();
++	if (err) {
++		printk(KERN_ERR "IMQ: Error trying imq_init_devs(net)\n");
++		return err;
++	}
++
++	err = imq_init_hooks();
++	if (err) {
++		printk(KERN_ERR "IMQ: Error trying imq_init_hooks()\n");
++		rtnl_link_unregister(&imq_link_ops);
++		memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
++		return err;
++	}
++
++	printk(KERN_INFO "IMQ driver loaded successfully.\n");
++
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++	printk(KERN_INFO "\tHooking IMQ before NAT on PREROUTING.\n");
++#else
++	printk(KERN_INFO "\tHooking IMQ after NAT on PREROUTING.\n");
++#endif
++#if defined(CONFIG_IMQ_BEHAVIOR_AB) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++	printk(KERN_INFO "\tHooking IMQ before NAT on POSTROUTING.\n");
++#else
++	printk(KERN_INFO "\tHooking IMQ after NAT on POSTROUTING.\n");
++#endif
++
++	return 0;
++}
++
++static void __exit imq_unhook(void)
++{
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++	nf_unregister_hook(&imq_ingress_ipv6);
++	nf_unregister_hook(&imq_egress_ipv6);
++#endif
++	nf_unregister_hook(&imq_ingress_ipv4);
++	nf_unregister_hook(&imq_egress_ipv4);
++
++	nf_unregister_queue_imq_handler();
++}
++
++static void __exit imq_cleanup_devs(void)
++{
++	rtnl_link_unregister(&imq_link_ops);
++	memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
++}
++
++static void __exit imq_exit_module(void)
++{
++	imq_unhook();
++	imq_cleanup_devs();
++	printk(KERN_INFO "IMQ driver unloaded successfully.\n");
++}
++
++module_init(imq_init_module);
++module_exit(imq_exit_module);
++
++module_param(numdevs, int, 0);
++MODULE_PARM_DESC(numdevs, "number of IMQ devices (how many imq* devices will "
++			"be created)");
++MODULE_AUTHOR("http://www.linuximq.net");
++MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See "
++			"http://www.linuximq.net/ for more information.");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS_RTNL_LINK("imq");
++
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -109,6 +109,129 @@ config EQUALIZER
+ 	  To compile this driver as a module, choose M here: the module
+ 	  will be called eql.  If unsure, say N.
+ 
++config IMQ
++	tristate "IMQ (intermediate queueing device) support"
++	depends on NETDEVICES && NETFILTER
++	---help---
++	  The IMQ device(s) is used as placeholder for QoS queueing
++	  disciplines. Every packet entering/leaving the IP stack can be
++	  directed through the IMQ device where it's enqueued/dequeued to the
++	  attached qdisc. This allows you to treat network devices as classes
++	  and distribute bandwidth among them. Iptables is used to specify
++	  through which IMQ device, if any, packets travel.
++
++	  More information at: http://www.linuximq.net/
++
++	  To compile this driver as a module, choose M here: the module
++	  will be called imq.  If unsure, say N.
++
++choice
++	prompt "IMQ behavior (PRE/POSTROUTING)"
++	depends on IMQ
++	default IMQ_BEHAVIOR_AB
++	help
++
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		IMQ can work in any of the following ways:
++
++		    PREROUTING   |      POSTROUTING
++		-----------------|-------------------
++		#1  After NAT    |      After NAT
++		#2  After NAT    |      Before NAT
++		#3  Before NAT   |      After NAT
++		#4  Before NAT   |      Before NAT
++
++		The default behavior is to hook before NAT on PREROUTING
++		and after NAT on POSTROUTING (#3).
++
++		This settings are specially usefull when trying to use IMQ
++		to shape NATed clients.
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_AA
++	bool "IMQ AA"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   After NAT
++		POSTROUTING:  After NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_AB
++	bool "IMQ AB"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   After NAT
++		POSTROUTING:  Before NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_BA
++	bool "IMQ BA"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   Before NAT
++		POSTROUTING:  After NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_BB
++	bool "IMQ BB"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   Before NAT
++		POSTROUTING:  Before NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++endchoice
++
++config IMQ_NUM_DEVS
++
++	int "Number of IMQ devices"
++	range 2 16
++	depends on IMQ
++	default "16"
++	help
++
++		This settings defines how many IMQ devices will be
++		created.
++
++		The default value is 16.
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
+ config TUN
+ 	tristate "Universal TUN/TAP device driver support"
+ 	select CRC32
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -165,6 +165,7 @@ obj-$(CONFIG_SLHC) += slhc.o
+ obj-$(CONFIG_XEN_NETDEV_FRONTEND) += xen-netfront.o
+ 
+ obj-$(CONFIG_DUMMY) += dummy.o
++obj-$(CONFIG_IMQ) += imq.o
+ obj-$(CONFIG_IFB) += ifb.o
+ obj-$(CONFIG_MACVLAN) += macvlan.o
+ obj-$(CONFIG_DE600) += de600.o
+--- /dev/null
++++ b/include/linux/imq.h
+@@ -0,0 +1,13 @@
++#ifndef _IMQ_H
++#define _IMQ_H
++
++/* IFMASK (16 device indexes, 0 to 15) and flag(s) fit in 5 bits */
++#define IMQ_F_BITS	5
++
++#define IMQ_F_IFMASK	0x0f
++#define IMQ_F_ENQUEUE	0x10
++
++#define IMQ_MAX_DEVS	(IMQ_F_IFMASK + 1)
++
++#endif /* _IMQ_H */
++
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -1114,6 +1114,7 @@ extern int		dev_alloc_name(struct net_de
+ extern int		dev_open(struct net_device *dev);
+ extern int		dev_close(struct net_device *dev);
+ extern void		dev_disable_lro(struct net_device *dev);
++extern struct netdev_queue *dev_pick_tx(struct net_device *dev, struct sk_buff *skb);
+ extern int		dev_queue_xmit(struct sk_buff *skb);
+ extern int		register_netdevice(struct net_device *dev);
+ extern void		unregister_netdevice(struct net_device *dev);
+--- /dev/null
++++ b/include/linux/netfilter/xt_IMQ.h
+@@ -0,0 +1,9 @@
++#ifndef _XT_IMQ_H
++#define _XT_IMQ_H
++
++struct xt_imq_info {
++	unsigned int todev;     /* target imq device */
++};
++
++#endif /* _XT_IMQ_H */
++
+--- /dev/null
++++ b/include/linux/netfilter_ipv4/ipt_IMQ.h
+@@ -0,0 +1,10 @@
++#ifndef _IPT_IMQ_H
++#define _IPT_IMQ_H
++
++/* Backwards compatibility for old userspace */
++#include <linux/netfilter/xt_IMQ.h>
++
++#define ipt_imq_info xt_imq_info
++
++#endif /* _IPT_IMQ_H */
++
+--- /dev/null
++++ b/include/linux/netfilter_ipv6/ip6t_IMQ.h
+@@ -0,0 +1,10 @@
++#ifndef _IP6T_IMQ_H
++#define _IP6T_IMQ_H
++
++/* Backwards compatibility for old userspace */
++#include <linux/netfilter/xt_IMQ.h>
++
++#define ip6t_imq_info xt_imq_info
++
++#endif /* _IP6T_IMQ_H */
++
+--- a/include/linux/skbuff.h
++++ b/include/linux/skbuff.h
+@@ -29,6 +29,9 @@
+ #include <linux/rcupdate.h>
+ #include <linux/dmaengine.h>
+ #include <linux/hrtimer.h>
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++#include <linux/imq.h>
++#endif
+ 
+ /* Don't change this without changing skb_csum_unnecessary! */
+ #define CHECKSUM_NONE 0
+@@ -330,6 +333,9 @@ struct sk_buff {
+ 	 * first. This is owned by whoever has the skb queued ATM.
+ 	 */
+ 	char			cb[48];
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	void			*cb_next;
++#endif
+ 
+ 	unsigned int		len,
+ 				data_len;
+@@ -362,6 +368,9 @@ struct sk_buff {
+ 	struct nf_conntrack	*nfct;
+ 	struct sk_buff		*nfct_reasm;
+ #endif
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	struct nf_queue_entry	*nf_queue_entry;
++#endif
+ #ifdef CONFIG_BRIDGE_NETFILTER
+ 	struct nf_bridge_info	*nf_bridge;
+ #endif
+@@ -383,6 +392,10 @@ struct sk_buff {
+ 
+ 	/* 0/14 bit hole */
+ 
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	__u8			imq_flags:IMQ_F_BITS;
++#endif
++
+ #ifdef CONFIG_NET_DMA
+ 	dma_cookie_t		dma_cookie;
+ #endif
+@@ -437,6 +450,12 @@ static inline struct rtable *skb_rtable(
+ 	return (struct rtable *)skb_dst(skb);
+ }
+ 
++
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++extern int skb_save_cb(struct sk_buff *skb);
++extern int skb_restore_cb(struct sk_buff *skb);
++#endif
++
+ extern void kfree_skb(struct sk_buff *skb);
+ extern void consume_skb(struct sk_buff *skb);
+ extern void	       __kfree_skb(struct sk_buff *skb);
+@@ -1972,6 +1991,10 @@ static inline void __nf_copy(struct sk_b
+ 	dst->nfct_reasm = src->nfct_reasm;
+ 	nf_conntrack_get_reasm(src->nfct_reasm);
+ #endif
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	dst->imq_flags = src->imq_flags;
++	dst->nf_queue_entry = src->nf_queue_entry;
++#endif
+ #ifdef CONFIG_BRIDGE_NETFILTER
+ 	dst->nf_bridge  = src->nf_bridge;
+ 	nf_bridge_get(src->nf_bridge);
+--- a/include/net/netfilter/nf_queue.h
++++ b/include/net/netfilter/nf_queue.h
+@@ -13,6 +13,12 @@ struct nf_queue_entry {
+ 	struct net_device	*indev;
+ 	struct net_device	*outdev;
+ 	int			(*okfn)(struct sk_buff *);
++
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	int			(*next_outfn)(struct nf_queue_entry *entry,
++					      unsigned int queuenum);
++	unsigned int		next_queuenum;
++#endif
+ };
+ 
+ #define nf_queue_entry_reroute(x) ((void *)x + sizeof(struct nf_queue_entry))
+@@ -30,5 +36,11 @@ extern int nf_unregister_queue_handler(u
+ 				       const struct nf_queue_handler *qh);
+ extern void nf_unregister_queue_handlers(const struct nf_queue_handler *qh);
+ extern void nf_reinject(struct nf_queue_entry *entry, unsigned int verdict);
++extern void nf_queue_entry_release_refs(struct nf_queue_entry *entry);
++
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++extern void nf_register_queue_imq_handler(const struct nf_queue_handler *qh);
++extern void nf_unregister_queue_imq_handler(void);
++#endif
+ 
+ #endif /* _NF_QUEUE_H */
+--- a/net/core/dev.c
++++ b/net/core/dev.c
+@@ -96,6 +96,9 @@
+ #include <net/net_namespace.h>
+ #include <net/sock.h>
+ #include <linux/rtnetlink.h>
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++#include <linux/imq.h>
++#endif
+ #include <linux/proc_fs.h>
+ #include <linux/seq_file.h>
+ #include <linux/stat.h>
+@@ -1704,7 +1707,11 @@ int dev_hard_start_xmit(struct sk_buff *
+ 	int rc;
+ 
+ 	if (likely(!skb->next)) {
+-		if (!list_empty(&ptype_all))
++		if (!list_empty(&ptype_all)
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++		    && !(skb->imq_flags & IMQ_F_ENQUEUE)
++#endif
++		    )
+ 			dev_queue_xmit_nit(skb, dev);
+ 
+ 		if (netif_needs_gso(dev, skb)) {
+@@ -1789,8 +1796,7 @@ u16 skb_tx_hash(const struct net_device 
+ }
+ EXPORT_SYMBOL(skb_tx_hash);
+ 
+-static struct netdev_queue *dev_pick_tx(struct net_device *dev,
+-					struct sk_buff *skb)
++struct netdev_queue *dev_pick_tx(struct net_device *dev, struct sk_buff *skb)
+ {
+ 	const struct net_device_ops *ops = dev->netdev_ops;
+ 	u16 queue_index = 0;
+@@ -1803,6 +1809,7 @@ static struct netdev_queue *dev_pick_tx(
+ 	skb_set_queue_mapping(skb, queue_index);
+ 	return netdev_get_tx_queue(dev, queue_index);
+ }
++EXPORT_SYMBOL(dev_pick_tx);
+ 
+ static inline int __dev_xmit_skb(struct sk_buff *skb, struct Qdisc *q,
+ 				 struct net_device *dev,
+--- a/net/core/skbuff.c
++++ b/net/core/skbuff.c
+@@ -72,6 +72,9 @@
+ 
+ static struct kmem_cache *skbuff_head_cache __read_mostly;
+ static struct kmem_cache *skbuff_fclone_cache __read_mostly;
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++static struct kmem_cache *skbuff_cb_store_cache __read_mostly;
++#endif
+ 
+ static void sock_pipe_buf_release(struct pipe_inode_info *pipe,
+ 				  struct pipe_buffer *buf)
+@@ -91,6 +94,83 @@ static int sock_pipe_buf_steal(struct pi
+ 	return 1;
+ }
+ 
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++/* Control buffer save/restore for IMQ devices */
++struct skb_cb_table {
++	void			*cb_next;
++	atomic_t		refcnt;
++	char      		cb[48];
++};
++
++static DEFINE_SPINLOCK(skb_cb_store_lock);
++
++int skb_save_cb(struct sk_buff *skb)
++{
++	struct skb_cb_table *next;
++
++	next = kmem_cache_alloc(skbuff_cb_store_cache, GFP_ATOMIC);
++	if (!next)
++		return -ENOMEM;
++
++	BUILD_BUG_ON(sizeof(skb->cb) != sizeof(next->cb));
++
++	memcpy(next->cb, skb->cb, sizeof(skb->cb));
++	next->cb_next = skb->cb_next;
++
++	atomic_set(&next->refcnt, 1);
++
++	skb->cb_next = next;
++	return 0;
++}
++EXPORT_SYMBOL(skb_save_cb);
++
++int skb_restore_cb(struct sk_buff *skb)
++{
++	struct skb_cb_table *next;
++
++	if (!skb->cb_next)
++		return 0;
++
++	next = skb->cb_next;
++
++	BUILD_BUG_ON(sizeof(skb->cb) != sizeof(next->cb));
++
++	memcpy(skb->cb, next->cb, sizeof(skb->cb));
++	skb->cb_next = next->cb_next;
++
++	spin_lock(&skb_cb_store_lock);
++
++	if (atomic_dec_and_test(&next->refcnt)) {
++		kmem_cache_free(skbuff_cb_store_cache, next);
++	}
++
++	spin_unlock(&skb_cb_store_lock);
++
++	return 0;
++}
++EXPORT_SYMBOL(skb_restore_cb);
++
++static void skb_copy_stored_cb(struct sk_buff *new, const struct sk_buff *__old)
++{
++	struct skb_cb_table *next;
++	struct sk_buff *old;
++
++	if (!__old->cb_next) {
++		new->cb_next = NULL;
++		return;
++	}
++
++	spin_lock(&skb_cb_store_lock);
++
++	old = (struct sk_buff *)__old;
++
++	next = old->cb_next;
++	atomic_inc(&next->refcnt);
++	new->cb_next = next;
++
++	spin_unlock(&skb_cb_store_lock);
++}
++#endif
+ 
+ /* Pipe buffer operations for a socket. */
+ static struct pipe_buf_operations sock_pipe_buf_ops = {
+@@ -398,6 +478,26 @@ static void skb_release_head_state(struc
+ 		WARN_ON(in_irq());
+ 		skb->destructor(skb);
+ 	}
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	/* This should not happen. When it does, avoid memleak by restoring
++	the chain of cb-backups. */
++	while(skb->cb_next != NULL) {
++		if (net_ratelimit())
++			printk(KERN_WARNING "IMQ: kfree_skb: skb->cb_next: "
++				"%08x\n", (unsigned int)skb->cb_next);
++
++		skb_restore_cb(skb);
++	}
++	/* This should not happen either, nf_queue_entry is nullified in
++	 * imq_dev_xmit(). If we have non-NULL nf_queue_entry then we are
++	 * leaking entry pointers, maybe memory. We don't know if this is
++	 * pointer to already freed memory, or should this be freed.
++	 * If this happens we need to add refcounting, etc for nf_queue_entry.
++	 */
++	if (skb->nf_queue_entry && net_ratelimit())
++		printk(KERN_WARNING
++				"IMQ: kfree_skb: skb->nf_queue_entry != NULL");
++#endif
+ #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
+ 	nf_conntrack_put(skb->nfct);
+ 	nf_conntrack_put_reasm(skb->nfct_reasm);
+@@ -535,6 +635,9 @@ static void __copy_skb_header(struct sk_
+ 	new->sp			= secpath_get(old->sp);
+ #endif
+ 	memcpy(new->cb, old->cb, sizeof(old->cb));
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	skb_copy_stored_cb(new, old);
++#endif
+ 	new->csum		= old->csum;
+ 	new->local_df		= old->local_df;
+ 	new->pkt_type		= old->pkt_type;
+@@ -2776,6 +2879,13 @@ void __init skb_init(void)
+ 						0,
+ 						SLAB_HWCACHE_ALIGN|SLAB_PANIC,
+ 						NULL);
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	skbuff_cb_store_cache = kmem_cache_create("skbuff_cb_store_cache",
++						  sizeof(struct skb_cb_table),
++						  0,
++						  SLAB_HWCACHE_ALIGN|SLAB_PANIC,
++						  NULL);
++#endif
+ }
+ 
+ /**
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -396,6 +396,18 @@ config NETFILTER_XT_TARGET_LED
+ 	  For more information on the LEDs available on your system, see
+ 	  Documentation/leds-class.txt
+ 
++config NETFILTER_XT_TARGET_IMQ
++        tristate '"IMQ" target support'
++	depends on NETFILTER_XTABLES
++	depends on IP_NF_MANGLE || IP6_NF_MANGLE
++	select IMQ
++	default m if NETFILTER_ADVANCED=n
++        help
++          This option adds a `IMQ' target which is used to specify if and
++          to which imq device packets should get enqueued/dequeued.
++
++          To compile it as a module, choose M here.  If unsure, say N.
++
+ config NETFILTER_XT_TARGET_MARK
+ 	tristate '"MARK" target support'
+ 	default m if NETFILTER_ADVANCED=n
+--- a/net/netfilter/Makefile
++++ b/net/netfilter/Makefile
+@@ -46,6 +46,7 @@ obj-$(CONFIG_NETFILTER_XT_TARGET_CONNMAR
+ obj-$(CONFIG_NETFILTER_XT_TARGET_CONNSECMARK) += xt_CONNSECMARK.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_DSCP) += xt_DSCP.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_HL) += xt_HL.o
++obj-$(CONFIG_NETFILTER_XT_TARGET_IMQ) += xt_IMQ.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_LED) += xt_LED.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_MARK) += xt_MARK.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_NFLOG) += xt_NFLOG.o
+--- a/net/netfilter/nf_queue.c
++++ b/net/netfilter/nf_queue.c
+@@ -20,6 +20,26 @@ static const struct nf_queue_handler *qu
+ 
+ static DEFINE_MUTEX(queue_handler_mutex);
+ 
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++static const struct nf_queue_handler *queue_imq_handler;
++
++void nf_register_queue_imq_handler(const struct nf_queue_handler *qh)
++{
++	mutex_lock(&queue_handler_mutex);
++	rcu_assign_pointer(queue_imq_handler, qh);
++	mutex_unlock(&queue_handler_mutex);
++}
++EXPORT_SYMBOL(nf_register_queue_imq_handler);
++
++void nf_unregister_queue_imq_handler(void)
++{
++	mutex_lock(&queue_handler_mutex);
++	rcu_assign_pointer(queue_imq_handler, NULL);
++	mutex_unlock(&queue_handler_mutex);
++}
++EXPORT_SYMBOL(nf_unregister_queue_imq_handler);
++#endif
++
+ /* return EBUSY when somebody else is registered, return EEXIST if the
+  * same handler is registered, return 0 in case of success. */
+ int nf_register_queue_handler(u_int8_t pf, const struct nf_queue_handler *qh)
+@@ -80,7 +100,7 @@ void nf_unregister_queue_handlers(const 
+ }
+ EXPORT_SYMBOL_GPL(nf_unregister_queue_handlers);
+ 
+-static void nf_queue_entry_release_refs(struct nf_queue_entry *entry)
++void nf_queue_entry_release_refs(struct nf_queue_entry *entry)
+ {
+ 	/* Release those devices we held, or Alexey will kill me. */
+ 	if (entry->indev)
+@@ -100,6 +120,7 @@ static void nf_queue_entry_release_refs(
+ 	/* Drop reference to owner of hook which queued us. */
+ 	module_put(entry->elem->owner);
+ }
++EXPORT_SYMBOL_GPL(nf_queue_entry_release_refs);
+ 
+ /*
+  * Any packet that leaves via this function must come back
+@@ -121,12 +142,26 @@ static int __nf_queue(struct sk_buff *sk
+ #endif
+ 	const struct nf_afinfo *afinfo;
+ 	const struct nf_queue_handler *qh;
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	const struct nf_queue_handler *qih = NULL;
++#endif
+ 
+ 	/* QUEUE == DROP if noone is waiting, to be safe. */
+ 	rcu_read_lock();
+ 
+ 	qh = rcu_dereference(queue_handler[pf]);
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++	if (pf == PF_INET || pf == PF_INET6)
++#else
++	if (pf == PF_INET)
++#endif
++		qih = rcu_dereference(queue_imq_handler);
++
++	if (!qh && !qih)
++#else /* !IMQ */
+ 	if (!qh)
++#endif
+ 		goto err_unlock;
+ 
+ 	afinfo = nf_get_afinfo(pf);
+@@ -145,6 +180,10 @@ static int __nf_queue(struct sk_buff *sk
+ 		.indev	= indev,
+ 		.outdev	= outdev,
+ 		.okfn	= okfn,
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++		.next_outfn = qh ? qh->outfn : NULL,
++		.next_queuenum = queuenum,
++#endif
+ 	};
+ 
+ 	/* If it's going away, ignore hook. */
+@@ -170,8 +209,19 @@ static int __nf_queue(struct sk_buff *sk
+ 	}
+ #endif
+ 	afinfo->saveroute(skb, entry);
++
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	if (qih) {
++		status = qih->outfn(entry, queuenum);
++		goto imq_skip_queue;
++	}
++#endif
++
+ 	status = qh->outfn(entry, queuenum);
+ 
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++imq_skip_queue:
++#endif
+ 	rcu_read_unlock();
+ 
+ 	if (status < 0) {
+--- /dev/null
++++ b/net/netfilter/xt_IMQ.c
+@@ -0,0 +1,73 @@
++/*
++ * This target marks packets to be enqueued to an imq device
++ */
++#include <linux/module.h>
++#include <linux/skbuff.h>
++#include <linux/netfilter/x_tables.h>
++#include <linux/netfilter/xt_IMQ.h>
++#include <linux/imq.h>
++
++static unsigned int imq_target(struct sk_buff *pskb,
++				const struct xt_target_param *par)
++{
++	const struct xt_imq_info *mr = par->targinfo;
++
++	pskb->imq_flags = (mr->todev & IMQ_F_IFMASK) | IMQ_F_ENQUEUE;
++
++	return XT_CONTINUE;
++}
++
++static bool imq_checkentry(const struct xt_tgchk_param *par)
++{
++	struct xt_imq_info *mr = par->targinfo;
++
++	if (mr->todev > IMQ_MAX_DEVS - 1) {
++		printk(KERN_WARNING
++		       "IMQ: invalid device specified, highest is %u\n",
++		       IMQ_MAX_DEVS - 1);
++		return 0;
++	}
++
++	return 1;
++}
++
++static struct xt_target xt_imq_reg[] __read_mostly = {
++	{
++		.name           = "IMQ",
++		.family		= AF_INET,
++		.checkentry     = imq_checkentry,
++		.target         = imq_target,
++		.targetsize	= sizeof(struct xt_imq_info),
++		.table		= "mangle",
++		.me             = THIS_MODULE
++	},
++	{
++		.name           = "IMQ",
++		.family		= AF_INET6,
++		.checkentry     = imq_checkentry,
++		.target         = imq_target,
++		.targetsize	= sizeof(struct xt_imq_info),
++		.table		= "mangle",
++		.me             = THIS_MODULE
++	},
++};
++
++static int __init imq_init(void)
++{
++	return xt_register_targets(xt_imq_reg, ARRAY_SIZE(xt_imq_reg));
++}
++
++static void __exit imq_fini(void)
++{
++	xt_unregister_targets(xt_imq_reg, ARRAY_SIZE(xt_imq_reg));
++}
++
++module_init(imq_init);
++module_exit(imq_fini);
++
++MODULE_AUTHOR("http://www.linuximq.net");
++MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See http://www.linuximq.net/ for more information.");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("ipt_IMQ");
++MODULE_ALIAS("ip6t_IMQ");
++
diff --git a/target/linux/generic/patches-2.6.32/180-netfilter_depends.patch b/target/linux/generic/patches-2.6.32/180-netfilter_depends.patch
new file mode 100644
index 0000000000..fc00d159c3
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/180-netfilter_depends.patch
@@ -0,0 +1,18 @@
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -160,7 +160,6 @@ config NF_CONNTRACK_FTP
+ 
+ config NF_CONNTRACK_H323
+ 	tristate "H.323 protocol support"
+-	depends on (IPV6 || IPV6=n)
+ 	depends on NETFILTER_ADVANCED
+ 	help
+ 	  H.323 is a VoIP signalling protocol from ITU-T. As one of the most
+@@ -505,7 +504,6 @@ config NETFILTER_XT_TARGET_SECMARK
+ 
+ config NETFILTER_XT_TARGET_TCPMSS
+ 	tristate '"TCPMSS" target support'
+-	depends on (IPV6 || IPV6=n)
+ 	default m if NETFILTER_ADVANCED=n
+ 	---help---
+ 	  This option adds a `TCPMSS' target, which allows you to alter the
diff --git a/target/linux/generic/patches-2.6.32/190-netfilter_rtsp.patch b/target/linux/generic/patches-2.6.32/190-netfilter_rtsp.patch
new file mode 100644
index 0000000000..29e82084ca
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/190-netfilter_rtsp.patch
@@ -0,0 +1,1366 @@
+--- /dev/null
++++ b/include/linux/netfilter/nf_conntrack_rtsp.h
+@@ -0,0 +1,63 @@
++/*
++ * RTSP extension for IP connection tracking.
++ * (C) 2003 by Tom Marshall <tmarshall at real.com>
++ * based on ip_conntrack_irc.h
++ *
++ *      This program is free software; you can redistribute it and/or
++ *      modify it under the terms of the GNU General Public License
++ *      as published by the Free Software Foundation; either version
++ *      2 of the License, or (at your option) any later version.
++ */
++#ifndef _IP_CONNTRACK_RTSP_H
++#define _IP_CONNTRACK_RTSP_H
++
++//#define IP_NF_RTSP_DEBUG 1
++#define IP_NF_RTSP_VERSION "0.6.21"
++
++#ifdef __KERNEL__
++/* port block types */
++typedef enum {
++    pb_single,  /* client_port=x */
++    pb_range,   /* client_port=x-y */
++    pb_discon   /* client_port=x/y (rtspbis) */
++} portblock_t;
++
++/* We record seq number and length of rtsp headers here, all in host order. */
++
++/*
++ * This structure is per expected connection.  It is a member of struct
++ * ip_conntrack_expect.  The TCP SEQ for the conntrack expect is stored
++ * there and we are expected to only store the length of the data which
++ * needs replaced.  If a packet contains multiple RTSP messages, we create
++ * one expected connection per message.
++ *
++ * We use these variables to mark the entire header block.  This may seem
++ * like overkill, but the nature of RTSP requires it.  A header may appear
++ * multiple times in a message.  We must treat two Transport headers the
++ * same as one Transport header with two entries.
++ */
++struct ip_ct_rtsp_expect
++{
++    u_int32_t   len;        /* length of header block */
++    portblock_t pbtype;     /* Type of port block that was requested */
++    u_int16_t   loport;     /* Port that was requested, low or first */
++    u_int16_t   hiport;     /* Port that was requested, high or second */
++#if 0
++    uint        method;     /* RTSP method */
++    uint        cseq;       /* CSeq from request */
++#endif
++};
++
++extern unsigned int (*nf_nat_rtsp_hook)(struct sk_buff *skb,
++				 enum ip_conntrack_info ctinfo,
++				 unsigned int matchoff, unsigned int matchlen,
++				 struct ip_ct_rtsp_expect *prtspexp,
++				 struct nf_conntrack_expect *exp);
++
++extern void (*nf_nat_rtsp_hook_expectfn)(struct nf_conn *ct, struct nf_conntrack_expect *exp);
++
++#define RTSP_PORT   554
++
++#endif /* __KERNEL__ */
++
++#endif /* _IP_CONNTRACK_RTSP_H */
+--- /dev/null
++++ b/include/linux/netfilter_helpers.h
+@@ -0,0 +1,133 @@
++/*
++ * Helpers for netfiler modules.  This file provides implementations for basic
++ * functions such as strncasecmp(), etc.
++ *
++ * gcc will warn for defined but unused functions, so we only include the
++ * functions requested.  The following macros are used:
++ *   NF_NEED_STRNCASECMP        nf_strncasecmp()
++ *   NF_NEED_STRTOU16           nf_strtou16()
++ *   NF_NEED_STRTOU32           nf_strtou32()
++ */
++#ifndef _NETFILTER_HELPERS_H
++#define _NETFILTER_HELPERS_H
++
++/* Only include these functions for kernel code. */
++#ifdef __KERNEL__
++
++#include <linux/ctype.h>
++#define iseol(c) ( (c) == '\r' || (c) == '\n' )
++
++/*
++ * The standard strncasecmp()
++ */
++#ifdef NF_NEED_STRNCASECMP
++static int
++nf_strncasecmp(const char* s1, const char* s2, u_int32_t len)
++{
++    if (s1 == NULL || s2 == NULL)
++    {
++        if (s1 == NULL && s2 == NULL)
++        {
++            return 0;
++        }
++        return (s1 == NULL) ? -1 : 1;
++    }
++    while (len > 0 && tolower(*s1) == tolower(*s2))
++    {
++        len--;
++        s1++;
++        s2++;
++    }
++    return ( (len == 0) ? 0 : (tolower(*s1) - tolower(*s2)) );
++}
++#endif /* NF_NEED_STRNCASECMP */
++
++/*
++ * Parse a string containing a 16-bit unsigned integer.
++ * Returns the number of chars used, or zero if no number is found.
++ */
++#ifdef NF_NEED_STRTOU16
++static int
++nf_strtou16(const char* pbuf, u_int16_t* pval)
++{
++    int n = 0;
++
++    *pval = 0;
++    while (isdigit(pbuf[n]))
++    {
++        *pval = (*pval * 10) + (pbuf[n] - '0');
++        n++;
++    }
++
++    return n;
++}
++#endif /* NF_NEED_STRTOU16 */
++
++/*
++ * Parse a string containing a 32-bit unsigned integer.
++ * Returns the number of chars used, or zero if no number is found.
++ */
++#ifdef NF_NEED_STRTOU32
++static int
++nf_strtou32(const char* pbuf, u_int32_t* pval)
++{
++    int n = 0;
++
++    *pval = 0;
++    while (pbuf[n] >= '0' && pbuf[n] <= '9')
++    {
++        *pval = (*pval * 10) + (pbuf[n] - '0');
++        n++;
++    }
++
++    return n;
++}
++#endif /* NF_NEED_STRTOU32 */
++
++/*
++ * Given a buffer and length, advance to the next line and mark the current
++ * line.
++ */
++#ifdef NF_NEED_NEXTLINE
++static int
++nf_nextline(char* p, uint len, uint* poff, uint* plineoff, uint* plinelen)
++{
++    uint    off = *poff;
++    uint    physlen = 0;
++
++    if (off >= len)
++    {
++        return 0;
++    }
++
++    while (p[off] != '\n')
++    {
++        if (len-off <= 1)
++        {
++            return 0;
++        }
++
++        physlen++;
++        off++;
++    }
++
++    /* if we saw a crlf, physlen needs adjusted */
++    if (physlen > 0 && p[off] == '\n' && p[off-1] == '\r')
++    {
++        physlen--;
++    }
++
++    /* advance past the newline */
++    off++;
++
++    *plineoff = *poff;
++    *plinelen = physlen;
++    *poff = off;
++
++    return 1;
++}
++#endif /* NF_NEED_NEXTLINE */
++
++#endif /* __KERNEL__ */
++
++#endif /* _NETFILTER_HELPERS_H */
+--- /dev/null
++++ b/include/linux/netfilter_mime.h
+@@ -0,0 +1,89 @@
++/*
++ * MIME functions for netfilter modules.  This file provides implementations
++ * for basic MIME parsing.  MIME headers are used in many protocols, such as
++ * HTTP, RTSP, SIP, etc.
++ *
++ * gcc will warn for defined but unused functions, so we only include the
++ * functions requested.  The following macros are used:
++ *   NF_NEED_MIME_NEXTLINE      nf_mime_nextline()
++ */
++#ifndef _NETFILTER_MIME_H
++#define _NETFILTER_MIME_H
++
++/* Only include these functions for kernel code. */
++#ifdef __KERNEL__
++
++#include <linux/ctype.h>
++
++/*
++ * Given a buffer and length, advance to the next line and mark the current
++ * line.  If the current line is empty, *plinelen will be set to zero.  If
++ * not, it will be set to the actual line length (including CRLF).
++ *
++ * 'line' in this context means logical line (includes LWS continuations).
++ * Returns 1 on success, 0 on failure.
++ */
++#ifdef NF_NEED_MIME_NEXTLINE
++static int
++nf_mime_nextline(char* p, uint len, uint* poff, uint* plineoff, uint* plinelen)
++{
++    uint    off = *poff;
++    uint    physlen = 0;
++    int     is_first_line = 1;
++
++    if (off >= len)
++    {
++        return 0;
++    }
++
++    do
++    {
++        while (p[off] != '\n')
++        {
++            if (len-off <= 1)
++            {
++                return 0;
++            }
++
++            physlen++;
++            off++;
++        }
++
++        /* if we saw a crlf, physlen needs adjusted */
++        if (physlen > 0 && p[off] == '\n' && p[off-1] == '\r')
++        {
++            physlen--;
++        }
++
++        /* advance past the newline */
++        off++;
++
++        /* check for an empty line */
++        if (physlen == 0)
++        {
++            break;
++        }
++
++        /* check for colon on the first physical line */
++        if (is_first_line)
++        {
++            is_first_line = 0;
++            if (memchr(p+(*poff), ':', physlen) == NULL)
++            {
++                return 0;
++            }
++        }
++    }
++    while (p[off] == ' ' || p[off] == '\t');
++
++    *plineoff = *poff;
++    *plinelen = (physlen == 0) ? 0 : (off - *poff);
++    *poff = off;
++
++    return 1;
++}
++#endif /* NF_NEED_MIME_NEXTLINE */
++
++#endif /* __KERNEL__ */
++
++#endif /* _NETFILTER_MIME_H */
+--- a/net/ipv4/netfilter/Makefile
++++ b/net/ipv4/netfilter/Makefile
+@@ -26,6 +26,7 @@ obj-$(CONFIG_NF_NAT_AMANDA) += nf_nat_am
+ obj-$(CONFIG_NF_NAT_FTP) += nf_nat_ftp.o
+ obj-$(CONFIG_NF_NAT_H323) += nf_nat_h323.o
+ obj-$(CONFIG_NF_NAT_IRC) += nf_nat_irc.o
++obj-$(CONFIG_NF_NAT_RTSP) += nf_nat_rtsp.o
+ obj-$(CONFIG_NF_NAT_PPTP) += nf_nat_pptp.o
+ obj-$(CONFIG_NF_NAT_SIP) += nf_nat_sip.o
+ obj-$(CONFIG_NF_NAT_SNMP_BASIC) += nf_nat_snmp_basic.o
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -267,6 +267,16 @@ config NF_CONNTRACK_TFTP
+ 
+ 	  To compile it as a module, choose M here.  If unsure, say N.
+ 
++config NF_CONNTRACK_RTSP
++	tristate "RTSP protocol support"
++	depends on NF_CONNTRACK
++	help
++		Support the RTSP protocol.  This allows UDP transports to be setup
++		properly, including RTP and RDT.
++
++		If you want to compile it as a module, say 'M' here and read
++		Documentation/modules.txt.  If unsure, say 'Y'.
++
+ config NF_CT_NETLINK
+ 	tristate 'Connection tracking netlink interface'
+ 	select NETFILTER_NETLINK
+--- a/net/netfilter/Makefile
++++ b/net/netfilter/Makefile
+@@ -33,6 +33,7 @@ obj-$(CONFIG_NF_CONNTRACK_PPTP) += nf_co
+ obj-$(CONFIG_NF_CONNTRACK_SANE) += nf_conntrack_sane.o
+ obj-$(CONFIG_NF_CONNTRACK_SIP) += nf_conntrack_sip.o
+ obj-$(CONFIG_NF_CONNTRACK_TFTP) += nf_conntrack_tftp.o
++obj-$(CONFIG_NF_CONNTRACK_RTSP) += nf_conntrack_rtsp.o
+ 
+ # transparent proxy support
+ obj-$(CONFIG_NETFILTER_TPROXY) += nf_tproxy_core.o
+--- a/net/ipv4/netfilter/Kconfig
++++ b/net/ipv4/netfilter/Kconfig
+@@ -257,6 +257,11 @@ config NF_NAT_IRC
+ 	depends on NF_CONNTRACK && NF_NAT
+ 	default NF_NAT && NF_CONNTRACK_IRC
+ 
++config NF_NAT_RTSP
++	tristate
++ 	depends on IP_NF_IPTABLES && NF_CONNTRACK && NF_NAT
++ 	default NF_NAT && NF_CONNTRACK_RTSP
++
+ config NF_NAT_TFTP
+ 	tristate
+ 	depends on NF_CONNTRACK && NF_NAT
+--- /dev/null
++++ b/net/netfilter/nf_conntrack_rtsp.c
+@@ -0,0 +1,517 @@
++/*
++ * RTSP extension for IP connection tracking
++ * (C) 2003 by Tom Marshall <tmarshall at real.com>
++ * based on ip_conntrack_irc.c
++ *
++ *      This program is free software; you can redistribute it and/or
++ *      modify it under the terms of the GNU General Public License
++ *      as published by the Free Software Foundation; either version
++ *      2 of the License, or (at your option) any later version.
++ *
++ * Module load syntax:
++ *   insmod nf_conntrack_rtsp.o ports=port1,port2,...port<MAX_PORTS>
++ *                              max_outstanding=n setup_timeout=secs
++ *
++ * If no ports are specified, the default will be port 554.
++ *
++ * With max_outstanding you can define the maximum number of not yet
++ * answered SETUP requests per RTSP session (default 8).
++ * With setup_timeout you can specify how long the system waits for
++ * an expected data channel (default 300 seconds).
++ *
++ * 2005-02-13: Harald Welte <laforge at netfilter.org>
++ * 	- port to 2.6
++ * 	- update to recent post-2.6.11 api changes
++ * 2006-09-14: Steven Van Acker <deepstar at singularity.be>
++ *      - removed calls to NAT code from conntrack helper: NAT no longer needed to use rtsp-conntrack
++ * 2007-04-18: Michael Guntsche <mike at it-loops.com>
++ * 			- Port to new NF API
++ */
++
++#include <linux/module.h>
++#include <linux/netfilter.h>
++#include <linux/ip.h>
++#include <linux/inet.h>
++#include <net/tcp.h>
++
++#include <net/netfilter/nf_conntrack.h>
++#include <net/netfilter/nf_conntrack_expect.h>
++#include <net/netfilter/nf_conntrack_helper.h>
++#include <linux/netfilter/nf_conntrack_rtsp.h>
++
++#define NF_NEED_STRNCASECMP
++#define NF_NEED_STRTOU16
++#define NF_NEED_STRTOU32
++#define NF_NEED_NEXTLINE
++#include <linux/netfilter_helpers.h>
++#define NF_NEED_MIME_NEXTLINE
++#include <linux/netfilter_mime.h>
++
++#include <linux/ctype.h>
++#define MAX_SIMUL_SETUP 8 /* XXX: use max_outstanding */
++#define INFOP(fmt, args...) printk(KERN_INFO "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
++#if 0
++#define DEBUGP(fmt, args...) printk(KERN_DEBUG "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
++#else
++#define DEBUGP(fmt, args...)
++#endif
++
++#define MAX_PORTS 8
++static int ports[MAX_PORTS];
++static int num_ports = 0;
++static int max_outstanding = 8;
++static unsigned int setup_timeout = 300;
++
++MODULE_AUTHOR("Tom Marshall <tmarshall at real.com>");
++MODULE_DESCRIPTION("RTSP connection tracking module");
++MODULE_LICENSE("GPL");
++module_param_array(ports, int, &num_ports, 0400);
++MODULE_PARM_DESC(ports, "port numbers of RTSP servers");
++module_param(max_outstanding, int, 0400);
++MODULE_PARM_DESC(max_outstanding, "max number of outstanding SETUP requests per RTSP session");
++module_param(setup_timeout, int, 0400);
++MODULE_PARM_DESC(setup_timeout, "timeout on for unestablished data channels");
++
++static char *rtsp_buffer;
++static DEFINE_SPINLOCK(rtsp_buffer_lock);
++
++unsigned int (*nf_nat_rtsp_hook)(struct sk_buff *skb,
++				 enum ip_conntrack_info ctinfo,
++				 unsigned int matchoff, unsigned int matchlen,struct ip_ct_rtsp_expect* prtspexp,
++				 struct nf_conntrack_expect *exp);
++void (*nf_nat_rtsp_hook_expectfn)(struct nf_conn *ct, struct nf_conntrack_expect *exp);
++
++EXPORT_SYMBOL_GPL(nf_nat_rtsp_hook);
++
++/*
++ * Max mappings we will allow for one RTSP connection (for RTP, the number
++ * of allocated ports is twice this value).  Note that SMIL burns a lot of
++ * ports so keep this reasonably high.  If this is too low, you will see a
++ * lot of "no free client map entries" messages.
++ */
++#define MAX_PORT_MAPS 16
++
++/*** default port list was here in the masq code: 554, 3030, 4040 ***/
++
++#define SKIP_WSPACE(ptr,len,off) while(off < len && isspace(*(ptr+off))) { off++; }
++
++/*
++ * Parse an RTSP packet.
++ *
++ * Returns zero if parsing failed.
++ *
++ * Parameters:
++ *  IN      ptcp        tcp data pointer
++ *  IN      tcplen      tcp data len
++ *  IN/OUT  ptcpoff     points to current tcp offset
++ *  OUT     phdrsoff    set to offset of rtsp headers
++ *  OUT     phdrslen    set to length of rtsp headers
++ *  OUT     pcseqoff    set to offset of CSeq header
++ *  OUT     pcseqlen    set to length of CSeq header
++ */
++static int
++rtsp_parse_message(char* ptcp, uint tcplen, uint* ptcpoff,
++                   uint* phdrsoff, uint* phdrslen,
++                   uint* pcseqoff, uint* pcseqlen,
++                   uint* transoff, uint* translen)
++{
++	uint    entitylen = 0;
++	uint    lineoff;
++	uint    linelen;
++
++	if (!nf_nextline(ptcp, tcplen, ptcpoff, &lineoff, &linelen))
++		return 0;
++
++	*phdrsoff = *ptcpoff;
++	while (nf_mime_nextline(ptcp, tcplen, ptcpoff, &lineoff, &linelen)) {
++		if (linelen == 0) {
++			if (entitylen > 0)
++				*ptcpoff += min(entitylen, tcplen - *ptcpoff);
++			break;
++		}
++		if (lineoff+linelen > tcplen) {
++			INFOP("!! overrun !!\n");
++			break;
++		}
++
++		if (nf_strncasecmp(ptcp+lineoff, "CSeq:", 5) == 0) {
++			*pcseqoff = lineoff;
++			*pcseqlen = linelen;
++		}
++
++		if (nf_strncasecmp(ptcp+lineoff, "Transport:", 10) == 0) {
++			*transoff = lineoff;
++			*translen = linelen;
++		}
++
++		if (nf_strncasecmp(ptcp+lineoff, "Content-Length:", 15) == 0) {
++			uint off = lineoff+15;
++			SKIP_WSPACE(ptcp+lineoff, linelen, off);
++			nf_strtou32(ptcp+off, &entitylen);
++		}
++	}
++	*phdrslen = (*ptcpoff) - (*phdrsoff);
++
++	return 1;
++}
++
++/*
++ * Find lo/hi client ports (if any) in transport header
++ * In:
++ *   ptcp, tcplen = packet
++ *   tranoff, tranlen = buffer to search
++ *
++ * Out:
++ *   pport_lo, pport_hi = lo/hi ports (host endian)
++ *
++ * Returns nonzero if any client ports found
++ *
++ * Note: it is valid (and expected) for the client to request multiple
++ * transports, so we need to parse the entire line.
++ */
++static int
++rtsp_parse_transport(char* ptran, uint tranlen,
++                     struct ip_ct_rtsp_expect* prtspexp)
++{
++	int     rc = 0;
++	uint    off = 0;
++
++	if (tranlen < 10 || !iseol(ptran[tranlen-1]) ||
++	    nf_strncasecmp(ptran, "Transport:", 10) != 0) {
++		INFOP("sanity check failed\n");
++		return 0;
++	}
++
++	DEBUGP("tran='%.*s'\n", (int)tranlen, ptran);
++	off += 10;
++	SKIP_WSPACE(ptran, tranlen, off);
++
++	/* Transport: tran;field;field=val,tran;field;field=val,... */
++	while (off < tranlen) {
++		const char* pparamend;
++		uint        nextparamoff;
++
++		pparamend = memchr(ptran+off, ',', tranlen-off);
++		pparamend = (pparamend == NULL) ? ptran+tranlen : pparamend+1;
++		nextparamoff = pparamend-ptran;
++
++		while (off < nextparamoff) {
++			const char* pfieldend;
++			uint        nextfieldoff;
++
++			pfieldend = memchr(ptran+off, ';', nextparamoff-off);
++			nextfieldoff = (pfieldend == NULL) ? nextparamoff : pfieldend-ptran+1;
++
++			if (strncmp(ptran+off, "client_port=", 12) == 0) {
++				u_int16_t   port;
++				uint        numlen;
++
++				off += 12;
++				numlen = nf_strtou16(ptran+off, &port);
++				off += numlen;
++				if (prtspexp->loport != 0 && prtspexp->loport != port)
++					DEBUGP("multiple ports found, port %hu ignored\n", port);
++				else {
++					DEBUGP("lo port found : %hu\n", port);
++					prtspexp->loport = prtspexp->hiport = port;
++					if (ptran[off] == '-') {
++						off++;
++						numlen = nf_strtou16(ptran+off, &port);
++						off += numlen;
++						prtspexp->pbtype = pb_range;
++						prtspexp->hiport = port;
++
++						// If we have a range, assume rtp:
++						// loport must be even, hiport must be loport+1
++						if ((prtspexp->loport & 0x0001) != 0 ||
++						    prtspexp->hiport != prtspexp->loport+1) {
++							DEBUGP("incorrect range: %hu-%hu, correcting\n",
++							       prtspexp->loport, prtspexp->hiport);
++							prtspexp->loport &= 0xfffe;
++							prtspexp->hiport = prtspexp->loport+1;
++						}
++					} else if (ptran[off] == '/') {
++						off++;
++						numlen = nf_strtou16(ptran+off, &port);
++						off += numlen;
++						prtspexp->pbtype = pb_discon;
++						prtspexp->hiport = port;
++					}
++					rc = 1;
++				}
++			}
++
++			/*
++			 * Note we don't look for the destination parameter here.
++			 * If we are using NAT, the NAT module will handle it.  If not,
++			 * and the client is sending packets elsewhere, the expectation
++			 * will quietly time out.
++			 */
++
++			off = nextfieldoff;
++		}
++
++		off = nextparamoff;
++	}
++
++	return rc;
++}
++
++void expected(struct nf_conn *ct, struct nf_conntrack_expect *exp)
++{
++    if(nf_nat_rtsp_hook_expectfn) {
++        nf_nat_rtsp_hook_expectfn(ct,exp);
++    }
++}
++
++/*** conntrack functions ***/
++
++/* outbound packet: client->server */
++
++static inline int
++help_out(struct sk_buff *skb, unsigned char *rb_ptr, unsigned int datalen,
++                struct nf_conn *ct, enum ip_conntrack_info ctinfo)
++{
++	struct ip_ct_rtsp_expect expinfo;
++
++	int dir = CTINFO2DIR(ctinfo);   /* = IP_CT_DIR_ORIGINAL */
++	//struct  tcphdr* tcph = (void*)iph + iph->ihl * 4;
++	//uint    tcplen = pktlen - iph->ihl * 4;
++	char*   pdata = rb_ptr;
++	//uint    datalen = tcplen - tcph->doff * 4;
++	uint    dataoff = 0;
++	int ret = NF_ACCEPT;
++
++	struct nf_conntrack_expect *exp;
++
++	__be16 be_loport;
++
++	memset(&expinfo, 0, sizeof(expinfo));
++
++	while (dataoff < datalen) {
++		uint    cmdoff = dataoff;
++		uint    hdrsoff = 0;
++		uint    hdrslen = 0;
++		uint    cseqoff = 0;
++		uint    cseqlen = 0;
++		uint    transoff = 0;
++		uint    translen = 0;
++		uint    off;
++
++		if (!rtsp_parse_message(pdata, datalen, &dataoff,
++					&hdrsoff, &hdrslen,
++					&cseqoff, &cseqlen,
++					&transoff, &translen))
++			break;      /* not a valid message */
++
++		if (strncmp(pdata+cmdoff, "SETUP ", 6) != 0)
++			continue;   /* not a SETUP message */
++		DEBUGP("found a setup message\n");
++
++		off = 0;
++		if(translen) {
++			rtsp_parse_transport(pdata+transoff, translen, &expinfo);
++		}
++
++		if (expinfo.loport == 0) {
++			DEBUGP("no udp transports found\n");
++			continue;   /* no udp transports found */
++		}
++
++		DEBUGP("udp transport found, ports=(%d,%hu,%hu)\n",
++		       (int)expinfo.pbtype, expinfo.loport, expinfo.hiport);
++
++		exp = nf_ct_expect_alloc(ct);
++		if (!exp) {
++			ret = NF_DROP;
++			goto out;
++		}
++
++		be_loport = htons(expinfo.loport);
++
++		nf_ct_expect_init(exp, NF_CT_EXPECT_CLASS_DEFAULT,
++			ct->tuplehash[!dir].tuple.src.l3num,
++			&ct->tuplehash[!dir].tuple.src.u3, &ct->tuplehash[!dir].tuple.dst.u3,
++			IPPROTO_UDP, NULL, &be_loport);
++
++		exp->master = ct;
++
++		exp->expectfn = expected;
++		exp->flags = 0;
++
++		if (expinfo.pbtype == pb_range) {
++			DEBUGP("Changing expectation mask to handle multiple ports\n");
++			exp->mask.src.u.udp.port  = 0xfffe;
++		}
++
++		DEBUGP("expect_related %u.%u.%u.%u:%u-%u.%u.%u.%u:%u\n",
++		       NIPQUAD(exp->tuple.src.u3.ip),
++		       ntohs(exp->tuple.src.u.udp.port),
++		       NIPQUAD(exp->tuple.dst.u3.ip),
++		       ntohs(exp->tuple.dst.u.udp.port));
++
++		if (nf_nat_rtsp_hook)
++			/* pass the request off to the nat helper */
++			ret = nf_nat_rtsp_hook(skb, ctinfo, hdrsoff, hdrslen, &expinfo, exp);
++		else if (nf_ct_expect_related(exp) != 0) {
++			INFOP("nf_ct_expect_related failed\n");
++			ret  = NF_DROP;
++		}
++		nf_ct_expect_put(exp);
++		goto out;
++	}
++out:
++
++	return ret;
++}
++
++
++static inline int
++help_in(struct sk_buff *skb, size_t pktlen,
++ struct nf_conn* ct, enum ip_conntrack_info ctinfo)
++{
++ return NF_ACCEPT;
++}
++
++static int help(struct sk_buff *skb, unsigned int protoff,
++		struct nf_conn *ct, enum ip_conntrack_info ctinfo)
++{
++	struct tcphdr _tcph, *th;
++	unsigned int dataoff, datalen;
++	char *rb_ptr;
++	int ret = NF_DROP;
++
++	/* Until there's been traffic both ways, don't look in packets. */
++	if (ctinfo != IP_CT_ESTABLISHED &&
++	    ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY) {
++		DEBUGP("conntrackinfo = %u\n", ctinfo);
++		return NF_ACCEPT;
++	}
++
++	/* Not whole TCP header? */
++	th = skb_header_pointer(skb, protoff, sizeof(_tcph), &_tcph);
++
++	if (!th)
++		return NF_ACCEPT;
++
++	/* No data ? */
++	dataoff = protoff + th->doff*4;
++	datalen = skb->len - dataoff;
++	if (dataoff >= skb->len)
++		return NF_ACCEPT;
++
++	spin_lock_bh(&rtsp_buffer_lock);
++	rb_ptr = skb_header_pointer(skb, dataoff,
++				    skb->len - dataoff, rtsp_buffer);
++	BUG_ON(rb_ptr == NULL);
++
++#if 0
++	/* Checksum invalid?  Ignore. */
++	/* FIXME: Source route IP option packets --RR */
++	if (tcp_v4_check(tcph, tcplen, iph->saddr, iph->daddr,
++			 csum_partial((char*)tcph, tcplen, 0)))
++	{
++		DEBUGP("bad csum: %p %u %u.%u.%u.%u %u.%u.%u.%u\n",
++		       tcph, tcplen, NIPQUAD(iph->saddr), NIPQUAD(iph->daddr));
++		return NF_ACCEPT;
++	}
++#endif
++
++	switch (CTINFO2DIR(ctinfo)) {
++	case IP_CT_DIR_ORIGINAL:
++		ret = help_out(skb, rb_ptr, datalen, ct, ctinfo);
++		break;
++	case IP_CT_DIR_REPLY:
++		DEBUGP("IP_CT_DIR_REPLY\n");
++		/* inbound packet: server->client */
++		ret = NF_ACCEPT;
++		break;
++	}
++
++	spin_unlock_bh(&rtsp_buffer_lock);
++
++	return ret;
++}
++
++static struct nf_conntrack_helper rtsp_helpers[MAX_PORTS];
++static char rtsp_names[MAX_PORTS][10];
++static struct nf_conntrack_expect_policy rtsp_expect_policy;
++
++/* This function is intentionally _NOT_ defined as __exit */
++static void
++fini(void)
++{
++	int i;
++	for (i = 0; i < num_ports; i++) {
++		DEBUGP("unregistering port %d\n", ports[i]);
++		nf_conntrack_helper_unregister(&rtsp_helpers[i]);
++	}
++	kfree(rtsp_buffer);
++}
++
++static int __init
++init(void)
++{
++	int i, ret;
++	struct nf_conntrack_helper *hlpr;
++	char *tmpname;
++
++	printk("nf_conntrack_rtsp v" IP_NF_RTSP_VERSION " loading\n");
++
++	if (max_outstanding < 1) {
++		printk("nf_conntrack_rtsp: max_outstanding must be a positive integer\n");
++		return -EBUSY;
++	}
++	if (setup_timeout < 0) {
++		printk("nf_conntrack_rtsp: setup_timeout must be a positive integer\n");
++		return -EBUSY;
++	}
++
++	rtsp_expect_policy.max_expected = max_outstanding;
++	rtsp_expect_policy.timeout = setup_timeout;
++
++	rtsp_buffer = kmalloc(65536, GFP_KERNEL);
++	if (!rtsp_buffer)
++		return -ENOMEM;
++
++	/* If no port given, default to standard rtsp port */
++	if (ports[0] == 0) {
++		ports[0] = RTSP_PORT;
++	}
++
++	for (i = 0; (i < MAX_PORTS) && ports[i]; i++) {
++		hlpr = &rtsp_helpers[i];
++		memset(hlpr, 0, sizeof(struct nf_conntrack_helper));
++		hlpr->tuple.src.u.tcp.port = htons(ports[i]);
++		hlpr->tuple.dst.protonum = IPPROTO_TCP;
++		hlpr->expect_policy = &rtsp_expect_policy;
++		hlpr->me = THIS_MODULE;
++		hlpr->help = help;
++
++		tmpname = &rtsp_names[i][0];
++		if (ports[i] == RTSP_PORT) {
++			sprintf(tmpname, "rtsp");
++		} else {
++			sprintf(tmpname, "rtsp-%d", i);
++		}
++		hlpr->name = tmpname;
++
++		DEBUGP("port #%d: %d\n", i, ports[i]);
++
++		ret = nf_conntrack_helper_register(hlpr);
++
++		if (ret) {
++			printk("nf_conntrack_rtsp: ERROR registering port %d\n", ports[i]);
++			fini();
++			return -EBUSY;
++		}
++		num_ports++;
++	}
++	return 0;
++}
++
++module_init(init);
++module_exit(fini);
++
++EXPORT_SYMBOL(nf_nat_rtsp_hook_expectfn);
++
+--- /dev/null
++++ b/net/ipv4/netfilter/nf_nat_rtsp.c
+@@ -0,0 +1,496 @@
++/*
++ * RTSP extension for TCP NAT alteration
++ * (C) 2003 by Tom Marshall <tmarshall at real.com>
++ * based on ip_nat_irc.c
++ *
++ *      This program is free software; you can redistribute it and/or
++ *      modify it under the terms of the GNU General Public License
++ *      as published by the Free Software Foundation; either version
++ *      2 of the License, or (at your option) any later version.
++ *
++ * Module load syntax:
++ *      insmod nf_nat_rtsp.o ports=port1,port2,...port<MAX_PORTS>
++ *                           stunaddr=<address>
++ *                           destaction=[auto|strip|none]
++ *
++ * If no ports are specified, the default will be port 554 only.
++ *
++ * stunaddr specifies the address used to detect that a client is using STUN.
++ * If this address is seen in the destination parameter, it is assumed that
++ * the client has already punched a UDP hole in the firewall, so we don't
++ * mangle the client_port.  If none is specified, it is autodetected.  It
++ * only needs to be set if you have multiple levels of NAT.  It should be
++ * set to the external address that the STUN clients detect.  Note that in
++ * this case, it will not be possible for clients to use UDP with servers
++ * between the NATs.
++ *
++ * If no destaction is specified, auto is used.
++ *   destaction=auto:  strip destination parameter if it is not stunaddr.
++ *   destaction=strip: always strip destination parameter (not recommended).
++ *   destaction=none:  do not touch destination parameter (not recommended).
++ */
++
++#include <linux/module.h>
++#include <net/tcp.h>
++#include <net/netfilter/nf_nat_helper.h>
++#include <net/netfilter/nf_nat_rule.h>
++#include <linux/netfilter/nf_conntrack_rtsp.h>
++#include <net/netfilter/nf_conntrack_expect.h>
++
++#include <linux/inet.h>
++#include <linux/ctype.h>
++#define NF_NEED_STRNCASECMP
++#define NF_NEED_STRTOU16
++#include <linux/netfilter_helpers.h>
++#define NF_NEED_MIME_NEXTLINE
++#include <linux/netfilter_mime.h>
++
++#define INFOP(fmt, args...) printk(KERN_INFO "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
++#if 0
++#define DEBUGP(fmt, args...) printk(KERN_DEBUG "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
++#else
++#define DEBUGP(fmt, args...)
++#endif
++
++#define MAX_PORTS       8
++#define DSTACT_AUTO     0
++#define DSTACT_STRIP    1
++#define DSTACT_NONE     2
++
++static char*    stunaddr = NULL;
++static char*    destaction = NULL;
++
++static u_int32_t extip = 0;
++static int       dstact = 0;
++
++MODULE_AUTHOR("Tom Marshall <tmarshall at real.com>");
++MODULE_DESCRIPTION("RTSP network address translation module");
++MODULE_LICENSE("GPL");
++module_param(stunaddr, charp, 0644);
++MODULE_PARM_DESC(stunaddr, "Address for detecting STUN");
++module_param(destaction, charp, 0644);
++MODULE_PARM_DESC(destaction, "Action for destination parameter (auto/strip/none)");
++
++#define SKIP_WSPACE(ptr,len,off) while(off < len && isspace(*(ptr+off))) { off++; }
++
++/*** helper functions ***/
++
++static void
++get_skb_tcpdata(struct sk_buff* skb, char** pptcpdata, uint* ptcpdatalen)
++{
++    struct iphdr*   iph  = ip_hdr(skb);
++    struct tcphdr*  tcph = (void *)iph + ip_hdrlen(skb);
++
++    *pptcpdata = (char*)tcph +  tcph->doff*4;
++    *ptcpdatalen = ((char*)skb_transport_header(skb) + skb->len) - *pptcpdata;
++}
++
++/*** nat functions ***/
++
++/*
++ * Mangle the "Transport:" header:
++ *   - Replace all occurences of "client_port=<spec>"
++ *   - Handle destination parameter
++ *
++ * In:
++ *   ct, ctinfo = conntrack context
++ *   skb        = packet
++ *   tranoff    = Transport header offset from TCP data
++ *   tranlen    = Transport header length (incl. CRLF)
++ *   rport_lo   = replacement low  port (host endian)
++ *   rport_hi   = replacement high port (host endian)
++ *
++ * Returns packet size difference.
++ *
++ * Assumes that a complete transport header is present, ending with CR or LF
++ */
++static int
++rtsp_mangle_tran(enum ip_conntrack_info ctinfo,
++                 struct nf_conntrack_expect* exp,
++								 struct ip_ct_rtsp_expect* prtspexp,
++                 struct sk_buff* skb, uint tranoff, uint tranlen)
++{
++    char*       ptcp;
++    uint        tcplen;
++    char*       ptran;
++    char        rbuf1[16];      /* Replacement buffer (one port) */
++    uint        rbuf1len;       /* Replacement len (one port) */
++    char        rbufa[16];      /* Replacement buffer (all ports) */
++    uint        rbufalen;       /* Replacement len (all ports) */
++    u_int32_t   newip;
++    u_int16_t   loport, hiport;
++    uint        off = 0;
++    uint        diff;           /* Number of bytes we removed */
++
++    struct nf_conn *ct = exp->master;
++    struct nf_conntrack_tuple *t;
++
++    char    szextaddr[15+1];
++    uint    extaddrlen;
++    int     is_stun;
++
++    get_skb_tcpdata(skb, &ptcp, &tcplen);
++    ptran = ptcp+tranoff;
++
++    if (tranoff+tranlen > tcplen || tcplen-tranoff < tranlen ||
++        tranlen < 10 || !iseol(ptran[tranlen-1]) ||
++        nf_strncasecmp(ptran, "Transport:", 10) != 0)
++    {
++        INFOP("sanity check failed\n");
++        return 0;
++    }
++    off += 10;
++    SKIP_WSPACE(ptcp+tranoff, tranlen, off);
++
++    newip = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip;
++    t = &exp->tuple;
++    t->dst.u3.ip = newip;
++
++    extaddrlen = extip ? sprintf(szextaddr, "%u.%u.%u.%u", NIPQUAD(extip))
++                       : sprintf(szextaddr, "%u.%u.%u.%u", NIPQUAD(newip));
++    DEBUGP("stunaddr=%s (%s)\n", szextaddr, (extip?"forced":"auto"));
++
++    rbuf1len = rbufalen = 0;
++    switch (prtspexp->pbtype)
++    {
++    case pb_single:
++        for (loport = prtspexp->loport; loport != 0; loport++) /* XXX: improper wrap? */
++        {
++            t->dst.u.udp.port = htons(loport);
++            if (nf_ct_expect_related(exp) == 0)
++            {
++                DEBUGP("using port %hu\n", loport);
++                break;
++            }
++        }
++        if (loport != 0)
++        {
++            rbuf1len = sprintf(rbuf1, "%hu", loport);
++            rbufalen = sprintf(rbufa, "%hu", loport);
++        }
++        break;
++    case pb_range:
++        for (loport = prtspexp->loport; loport != 0; loport += 2) /* XXX: improper wrap? */
++        {
++            t->dst.u.udp.port = htons(loport);
++            if (nf_ct_expect_related(exp) == 0)
++            {
++                hiport = loport + ~exp->mask.src.u.udp.port;
++                DEBUGP("using ports %hu-%hu\n", loport, hiport);
++                break;
++            }
++        }
++        if (loport != 0)
++        {
++            rbuf1len = sprintf(rbuf1, "%hu", loport);
++            rbufalen = sprintf(rbufa, "%hu-%hu", loport, loport+1);
++        }
++        break;
++    case pb_discon:
++        for (loport = prtspexp->loport; loport != 0; loport++) /* XXX: improper wrap? */
++        {
++            t->dst.u.udp.port = htons(loport);
++            if (nf_ct_expect_related(exp) == 0)
++            {
++                DEBUGP("using port %hu (1 of 2)\n", loport);
++                break;
++            }
++        }
++        for (hiport = prtspexp->hiport; hiport != 0; hiport++) /* XXX: improper wrap? */
++        {
++            t->dst.u.udp.port = htons(hiport);
++            if (nf_ct_expect_related(exp) == 0)
++            {
++                DEBUGP("using port %hu (2 of 2)\n", hiport);
++                break;
++            }
++        }
++        if (loport != 0 && hiport != 0)
++        {
++            rbuf1len = sprintf(rbuf1, "%hu", loport);
++            if (hiport == loport+1)
++            {
++                rbufalen = sprintf(rbufa, "%hu-%hu", loport, hiport);
++            }
++            else
++            {
++                rbufalen = sprintf(rbufa, "%hu/%hu", loport, hiport);
++            }
++        }
++        break;
++    }
++
++    if (rbuf1len == 0)
++    {
++        return 0;   /* cannot get replacement port(s) */
++    }
++
++    /* Transport: tran;field;field=val,tran;field;field=val,... */
++    while (off < tranlen)
++    {
++        uint        saveoff;
++        const char* pparamend;
++        uint        nextparamoff;
++
++        pparamend = memchr(ptran+off, ',', tranlen-off);
++        pparamend = (pparamend == NULL) ? ptran+tranlen : pparamend+1;
++        nextparamoff = pparamend-ptcp;
++
++        /*
++         * We pass over each param twice.  On the first pass, we look for a
++         * destination= field.  It is handled by the security policy.  If it
++         * is present, allowed, and equal to our external address, we assume
++         * that STUN is being used and we leave the client_port= field alone.
++         */
++        is_stun = 0;
++        saveoff = off;
++        while (off < nextparamoff)
++        {
++            const char* pfieldend;
++            uint        nextfieldoff;
++
++            pfieldend = memchr(ptran+off, ';', nextparamoff-off);
++            nextfieldoff = (pfieldend == NULL) ? nextparamoff : pfieldend-ptran+1;
++
++            if (dstact != DSTACT_NONE && strncmp(ptran+off, "destination=", 12) == 0)
++            {
++                if (strncmp(ptran+off+12, szextaddr, extaddrlen) == 0)
++                {
++                    is_stun = 1;
++                }
++                if (dstact == DSTACT_STRIP || (dstact == DSTACT_AUTO && !is_stun))
++                {
++                    diff = nextfieldoff-off;
++                    if (!nf_nat_mangle_tcp_packet(skb, ct, ctinfo,
++                                                         off, diff, NULL, 0))
++                    {
++                        /* mangle failed, all we can do is bail */
++			nf_ct_unexpect_related(exp);
++                        return 0;
++                    }
++                    get_skb_tcpdata(skb, &ptcp, &tcplen);
++                    ptran = ptcp+tranoff;
++                    tranlen -= diff;
++                    nextparamoff -= diff;
++                    nextfieldoff -= diff;
++                }
++            }
++
++            off = nextfieldoff;
++        }
++        if (is_stun)
++        {
++            continue;
++        }
++        off = saveoff;
++        while (off < nextparamoff)
++        {
++            const char* pfieldend;
++            uint        nextfieldoff;
++
++            pfieldend = memchr(ptran+off, ';', nextparamoff-off);
++            nextfieldoff = (pfieldend == NULL) ? nextparamoff : pfieldend-ptran+1;
++
++            if (strncmp(ptran+off, "client_port=", 12) == 0)
++            {
++                u_int16_t   port;
++                uint        numlen;
++                uint        origoff;
++                uint        origlen;
++                char*       rbuf    = rbuf1;
++                uint        rbuflen = rbuf1len;
++
++                off += 12;
++                origoff = (ptran-ptcp)+off;
++                origlen = 0;
++                numlen = nf_strtou16(ptran+off, &port);
++                off += numlen;
++                origlen += numlen;
++                if (port != prtspexp->loport)
++                {
++                    DEBUGP("multiple ports found, port %hu ignored\n", port);
++                }
++                else
++                {
++                    if (ptran[off] == '-' || ptran[off] == '/')
++                    {
++                        off++;
++                        origlen++;
++                        numlen = nf_strtou16(ptran+off, &port);
++                        off += numlen;
++                        origlen += numlen;
++                        rbuf = rbufa;
++                        rbuflen = rbufalen;
++                    }
++
++                    /*
++                     * note we cannot just memcpy() if the sizes are the same.
++                     * the mangle function does skb resizing, checks for a
++                     * cloned skb, and updates the checksums.
++                     *
++                     * parameter 4 below is offset from start of tcp data.
++                     */
++                    diff = origlen-rbuflen;
++                    if (!nf_nat_mangle_tcp_packet(skb, ct, ctinfo,
++                                              origoff, origlen, rbuf, rbuflen))
++                    {
++                        /* mangle failed, all we can do is bail */
++			nf_ct_unexpect_related(exp);
++                        return 0;
++                    }
++                    get_skb_tcpdata(skb, &ptcp, &tcplen);
++                    ptran = ptcp+tranoff;
++                    tranlen -= diff;
++                    nextparamoff -= diff;
++                    nextfieldoff -= diff;
++                }
++            }
++
++            off = nextfieldoff;
++        }
++
++        off = nextparamoff;
++    }
++
++    return 1;
++}
++
++static uint
++help_out(struct sk_buff *skb, enum ip_conntrack_info ctinfo,
++	 unsigned int matchoff, unsigned int matchlen, struct ip_ct_rtsp_expect* prtspexp,
++	 struct nf_conntrack_expect* exp)
++{
++    char*   ptcp;
++    uint    tcplen;
++    uint    hdrsoff;
++    uint    hdrslen;
++    uint    lineoff;
++    uint    linelen;
++    uint    off;
++
++    //struct iphdr* iph = (struct iphdr*)skb->nh.iph;
++    //struct tcphdr* tcph = (struct tcphdr*)((void*)iph + iph->ihl*4);
++
++    get_skb_tcpdata(skb, &ptcp, &tcplen);
++    hdrsoff = matchoff;//exp->seq - ntohl(tcph->seq);
++    hdrslen = matchlen;
++    off = hdrsoff;
++    DEBUGP("NAT rtsp help_out\n");
++
++    while (nf_mime_nextline(ptcp, hdrsoff+hdrslen, &off, &lineoff, &linelen))
++    {
++        if (linelen == 0)
++        {
++            break;
++        }
++        if (off > hdrsoff+hdrslen)
++        {
++            INFOP("!! overrun !!");
++            break;
++        }
++        DEBUGP("hdr: len=%u, %.*s", linelen, (int)linelen, ptcp+lineoff);
++
++        if (nf_strncasecmp(ptcp+lineoff, "Transport:", 10) == 0)
++        {
++            uint oldtcplen = tcplen;
++	    DEBUGP("hdr: Transport\n");
++            if (!rtsp_mangle_tran(ctinfo, exp, prtspexp, skb, lineoff, linelen))
++            {
++		DEBUGP("hdr: Transport mangle failed");
++                break;
++            }
++            get_skb_tcpdata(skb, &ptcp, &tcplen);
++            hdrslen -= (oldtcplen-tcplen);
++            off -= (oldtcplen-tcplen);
++            lineoff -= (oldtcplen-tcplen);
++            linelen -= (oldtcplen-tcplen);
++            DEBUGP("rep: len=%u, %.*s", linelen, (int)linelen, ptcp+lineoff);
++        }
++    }
++
++    return NF_ACCEPT;
++}
++
++static unsigned int
++help(struct sk_buff *skb, enum ip_conntrack_info ctinfo,
++     unsigned int matchoff, unsigned int matchlen, struct ip_ct_rtsp_expect* prtspexp,
++     struct nf_conntrack_expect* exp)
++{
++    int dir = CTINFO2DIR(ctinfo);
++    int rc = NF_ACCEPT;
++
++    switch (dir)
++    {
++    case IP_CT_DIR_ORIGINAL:
++        rc = help_out(skb, ctinfo, matchoff, matchlen, prtspexp, exp);
++        break;
++    case IP_CT_DIR_REPLY:
++	DEBUGP("unmangle ! %u\n", ctinfo);
++    	/* XXX: unmangle */
++	rc = NF_ACCEPT;
++        break;
++    }
++    //UNLOCK_BH(&ip_rtsp_lock);
++
++    return rc;
++}
++
++static void expected(struct nf_conn* ct, struct nf_conntrack_expect *exp)
++{
++    struct nf_nat_multi_range_compat mr;
++    u_int32_t newdstip, newsrcip, newip;
++
++    struct nf_conn *master = ct->master;
++
++    newdstip = master->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
++    newsrcip = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
++    //FIXME (how to port that ?)
++    //code from 2.4 : newip = (HOOK2MANIP(hooknum) == IP_NAT_MANIP_SRC) ? newsrcip : newdstip;
++    newip = newdstip;
++
++    DEBUGP("newsrcip=%u.%u.%u.%u, newdstip=%u.%u.%u.%u, newip=%u.%u.%u.%u\n",
++           NIPQUAD(newsrcip), NIPQUAD(newdstip), NIPQUAD(newip));
++
++    mr.rangesize = 1;
++    // We don't want to manip the per-protocol, just the IPs.
++    mr.range[0].flags = IP_NAT_RANGE_MAP_IPS;
++    mr.range[0].min_ip = mr.range[0].max_ip = newip;
++
++    nf_nat_setup_info(ct, &mr.range[0], IP_NAT_MANIP_DST);
++}
++
++
++static void __exit fini(void)
++{
++	nf_nat_rtsp_hook = NULL;
++        nf_nat_rtsp_hook_expectfn = NULL;
++	synchronize_net();
++}
++
++static int __init init(void)
++{
++	printk("nf_nat_rtsp v" IP_NF_RTSP_VERSION " loading\n");
++
++	BUG_ON(nf_nat_rtsp_hook);
++	nf_nat_rtsp_hook = help;
++        nf_nat_rtsp_hook_expectfn = &expected;
++
++	if (stunaddr != NULL)
++		extip = in_aton(stunaddr);
++
++	if (destaction != NULL) {
++	        if (strcmp(destaction, "auto") == 0)
++			dstact = DSTACT_AUTO;
++
++		if (strcmp(destaction, "strip") == 0)
++			dstact = DSTACT_STRIP;
++
++		if (strcmp(destaction, "none") == 0)
++			dstact = DSTACT_NONE;
++	}
++
++	return 0;
++}
++
++module_init(init);
++module_exit(fini);
diff --git a/target/linux/generic/patches-2.6.32/200-sched_esfq.patch b/target/linux/generic/patches-2.6.32/200-sched_esfq.patch
new file mode 100644
index 0000000000..f3636e6521
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/200-sched_esfq.patch
@@ -0,0 +1,795 @@
+--- a/include/linux/pkt_sched.h
++++ b/include/linux/pkt_sched.h
+@@ -182,8 +182,37 @@ struct tc_sfq_xstats
+  *
+  *	The only reason for this is efficiency, it is possible
+  *	to change these parameters in compile time.
++ *
++ *	If you need to play with these values, use esfq instead.
+  */
+ 
++/* ESFQ section */
++
++enum
++{
++        /* traditional */
++	TCA_SFQ_HASH_CLASSIC,
++	TCA_SFQ_HASH_DST,
++	TCA_SFQ_HASH_SRC,
++	TCA_SFQ_HASH_FWMARK,
++	/* conntrack */
++	TCA_SFQ_HASH_CTORIGDST,
++	TCA_SFQ_HASH_CTORIGSRC,
++	TCA_SFQ_HASH_CTREPLDST,
++	TCA_SFQ_HASH_CTREPLSRC,
++	TCA_SFQ_HASH_CTNATCHG,
++};
++
++struct tc_esfq_qopt
++{
++	unsigned	quantum;	/* Bytes per round allocated to flow */
++	int		perturb_period;	/* Period of hash perturbation */
++	__u32		limit;		/* Maximal packets in queue */
++	unsigned	divisor;	/* Hash divisor  */
++	unsigned	flows;		/* Maximal number of flows  */
++	unsigned	hash_kind;	/* Hash function to use for flow identification */
++};
++
+ /* RED section */
+ 
+ enum
+--- a/net/sched/Kconfig
++++ b/net/sched/Kconfig
+@@ -137,6 +137,37 @@ config NET_SCH_SFQ
+ 	  To compile this code as a module, choose M here: the
+ 	  module will be called sch_sfq.
+ 
++config NET_SCH_ESFQ
++	tristate "Enhanced Stochastic Fairness Queueing (ESFQ)"
++	---help---
++	  Say Y here if you want to use the Enhanced Stochastic Fairness
++	  Queueing (ESFQ) packet scheduling algorithm for some of your network
++	  devices or as a leaf discipline for a classful qdisc such as HTB or
++	  CBQ (see the top of <file:net/sched/sch_esfq.c> for details and
++	  references to the SFQ algorithm).
++
++	  This is an enchanced SFQ version which allows you to control some
++	  hardcoded values in the SFQ scheduler.
++
++	  ESFQ also adds control of the hash function used to identify packet
++	  flows. The original SFQ discipline hashes by connection; ESFQ add
++	  several other hashing methods, such as by src IP or by dst IP, which
++	  can be more fair to users in some networking situations.
++
++	  To compile this code as a module, choose M here: the
++	  module will be called sch_esfq.
++
++config NET_SCH_ESFQ_NFCT
++	bool "Connection Tracking Hash Types"
++	depends on NET_SCH_ESFQ && NF_CONNTRACK
++	---help---
++	  Say Y here to enable support for hashing based on netfilter connection
++	  tracking information. This is useful for a router that is also using
++	  NAT to connect privately-addressed hosts to the Internet. If you want
++	  to provide fair distribution of upstream bandwidth, ESFQ must use
++	  connection tracking information, since all outgoing packets will share
++	  the same source address.
++
+ config NET_SCH_TEQL
+ 	tristate "True Link Equalizer (TEQL)"
+ 	---help---
+--- a/net/sched/Makefile
++++ b/net/sched/Makefile
+@@ -24,6 +24,7 @@ obj-$(CONFIG_NET_SCH_GRED)	+= sch_gred.o
+ obj-$(CONFIG_NET_SCH_INGRESS)	+= sch_ingress.o 
+ obj-$(CONFIG_NET_SCH_DSMARK)	+= sch_dsmark.o
+ obj-$(CONFIG_NET_SCH_SFQ)	+= sch_sfq.o
++obj-$(CONFIG_NET_SCH_ESFQ)	+= sch_esfq.o
+ obj-$(CONFIG_NET_SCH_TBF)	+= sch_tbf.o
+ obj-$(CONFIG_NET_SCH_TEQL)	+= sch_teql.o
+ obj-$(CONFIG_NET_SCH_PRIO)	+= sch_prio.o
+--- /dev/null
++++ b/net/sched/sch_esfq.c
+@@ -0,0 +1,702 @@
++/*
++ * net/sched/sch_esfq.c	Extended Stochastic Fairness Queueing discipline.
++ *
++ *		This program is free software; you can redistribute it and/or
++ *		modify it under the terms of the GNU General Public License
++ *		as published by the Free Software Foundation; either version
++ *		2 of the License, or (at your option) any later version.
++ *
++ * Authors:	Alexey Kuznetsov, <kuznet@ms2.inr.ac.ru>
++ *
++ * Changes:	Alexander Atanasov, <alex@ssi.bg>
++ *		Added dynamic depth,limit,divisor,hash_kind options.
++ *		Added dst and src hashes.
++ *
++ * 		Alexander Clouter, <alex@digriz.org.uk>
++ *		Ported ESFQ to Linux 2.6.
++ *
++ * 		Corey Hickey, <bugfood-c@fatooh.org>
++ *		Maintenance of the Linux 2.6 port.
++ *		Added fwmark hash (thanks to Robert Kurjata).
++ *		Added usage of jhash.
++ *		Added conntrack support.
++ *		Added ctnatchg hash (thanks to Ben Pfountz).
++ */
++
++#include <linux/module.h>
++#include <asm/uaccess.h>
++#include <asm/system.h>
++#include <linux/bitops.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/jiffies.h>
++#include <linux/string.h>
++#include <linux/mm.h>
++#include <linux/socket.h>
++#include <linux/sockios.h>
++#include <linux/in.h>
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/if_ether.h>
++#include <linux/inet.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/notifier.h>
++#include <linux/init.h>
++#include <net/ip.h>
++#include <net/netlink.h>
++#include <linux/ipv6.h>
++#include <net/route.h>
++#include <linux/skbuff.h>
++#include <net/sock.h>
++#include <net/pkt_sched.h>
++#include <linux/jhash.h>
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++#include <net/netfilter/nf_conntrack.h>
++#endif
++
++/*	Stochastic Fairness Queuing algorithm.
++	For more comments look at sch_sfq.c.
++	The difference is that you can change limit, depth,
++	hash table size and choose alternate hash types.
++
++	classic:	same as in sch_sfq.c
++	dst:		destination IP address
++	src:		source IP address
++	fwmark:		netfilter mark value
++	ctorigdst:	original destination IP address
++	ctorigsrc:	original source IP address
++	ctrepldst:	reply destination IP address
++	ctreplsrc:	reply source IP
++
++*/
++
++#define ESFQ_HEAD 0
++#define ESFQ_TAIL 1
++
++/* This type should contain at least SFQ_DEPTH*2 values */
++typedef unsigned int esfq_index;
++
++struct esfq_head
++{
++	esfq_index	next;
++	esfq_index	prev;
++};
++
++struct esfq_sched_data
++{
++/* Parameters */
++	int		perturb_period;
++	unsigned	quantum;	/* Allotment per round: MUST BE >= MTU */
++	int		limit;
++	unsigned	depth;
++	unsigned	hash_divisor;
++	unsigned	hash_kind;
++/* Variables */
++	struct timer_list perturb_timer;
++	int		perturbation;
++	esfq_index	tail;		/* Index of current slot in round */
++	esfq_index	max_depth;	/* Maximal depth */
++
++	esfq_index	*ht;			/* Hash table */
++	esfq_index	*next;			/* Active slots link */
++	short		*allot;			/* Current allotment per slot */
++	unsigned short	*hash;			/* Hash value indexed by slots */
++	struct sk_buff_head	*qs;		/* Slot queue */
++	struct esfq_head	*dep;		/* Linked list of slots, indexed by depth */
++};
++
++/* This contains the info we will hash. */
++struct esfq_packet_info
++{
++	u32	proto;		/* protocol or port */
++	u32	src;		/* source from packet header */
++	u32	dst;		/* destination from packet header */
++	u32	ctorigsrc;	/* original source from conntrack */
++	u32	ctorigdst;	/* original destination from conntrack */
++	u32	ctreplsrc;	/* reply source from conntrack */
++	u32	ctrepldst;	/* reply destination from conntrack */
++	u32	mark;		/* netfilter mark (fwmark) */
++};
++
++static __inline__ unsigned esfq_jhash_1word(struct esfq_sched_data *q,u32 a)
++{
++	return jhash_1word(a, q->perturbation) & (q->hash_divisor-1);
++}
++
++static __inline__ unsigned esfq_jhash_2words(struct esfq_sched_data *q, u32 a, u32 b)
++{
++	return jhash_2words(a, b, q->perturbation) & (q->hash_divisor-1);
++}
++
++static __inline__ unsigned esfq_jhash_3words(struct esfq_sched_data *q, u32 a, u32 b, u32 c)
++{
++	return jhash_3words(a, b, c, q->perturbation) & (q->hash_divisor-1);
++}
++
++static unsigned esfq_hash(struct esfq_sched_data *q, struct sk_buff *skb)
++{
++	struct esfq_packet_info info;
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++	enum ip_conntrack_info ctinfo;
++	struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
++#endif
++
++	switch (skb->protocol) {
++	case __constant_htons(ETH_P_IP):
++	{
++		struct iphdr *iph = ip_hdr(skb);
++		info.dst = iph->daddr;
++		info.src = iph->saddr;
++		if (!(iph->frag_off&htons(IP_MF|IP_OFFSET)) &&
++		    (iph->protocol == IPPROTO_TCP ||
++		     iph->protocol == IPPROTO_UDP ||
++		     iph->protocol == IPPROTO_SCTP ||
++		     iph->protocol == IPPROTO_DCCP ||
++		     iph->protocol == IPPROTO_ESP))
++			info.proto = *(((u32*)iph) + iph->ihl);
++		else
++			info.proto = iph->protocol;
++		break;
++	}
++	case __constant_htons(ETH_P_IPV6):
++	{
++		struct ipv6hdr *iph = ipv6_hdr(skb);
++		/* Hash ipv6 addresses into a u32. This isn't ideal,
++		 * but the code is simple. */
++		info.dst = jhash2(iph->daddr.s6_addr32, 4, q->perturbation);
++		info.src = jhash2(iph->saddr.s6_addr32, 4, q->perturbation);
++		if (iph->nexthdr == IPPROTO_TCP ||
++		    iph->nexthdr == IPPROTO_UDP ||
++		    iph->nexthdr == IPPROTO_SCTP ||
++		    iph->nexthdr == IPPROTO_DCCP ||
++		    iph->nexthdr == IPPROTO_ESP)
++			info.proto = *(u32*)&iph[1];
++		else
++			info.proto = iph->nexthdr;
++		break;
++	}
++	default:
++		info.dst   = (u32)(unsigned long)skb_dst(skb);
++		info.src   = (u32)(unsigned long)skb->sk;
++		info.proto = skb->protocol;
++	}
++
++	info.mark = skb->mark;
++
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++	/* defaults if there is no conntrack info */
++	info.ctorigsrc = info.src;
++	info.ctorigdst = info.dst;
++	info.ctreplsrc = info.dst;
++	info.ctrepldst = info.src;
++	/* collect conntrack info */
++	if (ct && ct != &nf_conntrack_untracked) {
++		if (skb->protocol == __constant_htons(ETH_P_IP)) {
++			info.ctorigsrc = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
++			info.ctorigdst = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3.ip;
++			info.ctreplsrc = ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3.ip;
++			info.ctrepldst = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip;
++		}
++		else if (skb->protocol == __constant_htons(ETH_P_IPV6)) {
++			/* Again, hash ipv6 addresses into a single u32. */
++			info.ctorigsrc = jhash2(ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip6, 4, q->perturbation);
++			info.ctorigdst = jhash2(ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3.ip6, 4, q->perturbation);
++			info.ctreplsrc = jhash2(ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3.ip6, 4, q->perturbation);
++			info.ctrepldst = jhash2(ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip6, 4, q->perturbation);
++		}
++
++	}
++#endif
++
++	switch(q->hash_kind) {
++	case TCA_SFQ_HASH_CLASSIC:
++		return esfq_jhash_3words(q, info.dst, info.src, info.proto);
++	case TCA_SFQ_HASH_DST:
++		return esfq_jhash_1word(q, info.dst);
++	case TCA_SFQ_HASH_SRC:
++		return esfq_jhash_1word(q, info.src);
++	case TCA_SFQ_HASH_FWMARK:
++		return esfq_jhash_1word(q, info.mark);
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++	case TCA_SFQ_HASH_CTORIGDST:
++		return esfq_jhash_1word(q, info.ctorigdst);
++	case TCA_SFQ_HASH_CTORIGSRC:
++		return esfq_jhash_1word(q, info.ctorigsrc);
++	case TCA_SFQ_HASH_CTREPLDST:
++		return esfq_jhash_1word(q, info.ctrepldst);
++	case TCA_SFQ_HASH_CTREPLSRC:
++		return esfq_jhash_1word(q, info.ctreplsrc);
++	case TCA_SFQ_HASH_CTNATCHG:
++	{
++		if (info.ctorigdst == info.ctreplsrc)
++			return esfq_jhash_1word(q, info.ctorigsrc);
++		return esfq_jhash_1word(q, info.ctreplsrc);
++	}
++#endif
++	default:
++		if (net_ratelimit())
++			printk(KERN_WARNING "ESFQ: Unknown hash method. Falling back to classic.\n");
++	}
++	return esfq_jhash_3words(q, info.dst, info.src, info.proto);
++}
++
++static inline void esfq_link(struct esfq_sched_data *q, esfq_index x)
++{
++	esfq_index p, n;
++	int d = q->qs[x].qlen + q->depth;
++
++	p = d;
++	n = q->dep[d].next;
++	q->dep[x].next = n;
++	q->dep[x].prev = p;
++	q->dep[p].next = q->dep[n].prev = x;
++}
++
++static inline void esfq_dec(struct esfq_sched_data *q, esfq_index x)
++{
++	esfq_index p, n;
++
++	n = q->dep[x].next;
++	p = q->dep[x].prev;
++	q->dep[p].next = n;
++	q->dep[n].prev = p;
++
++	if (n == p && q->max_depth == q->qs[x].qlen + 1)
++		q->max_depth--;
++
++	esfq_link(q, x);
++}
++
++static inline void esfq_inc(struct esfq_sched_data *q, esfq_index x)
++{
++	esfq_index p, n;
++	int d;
++
++	n = q->dep[x].next;
++	p = q->dep[x].prev;
++	q->dep[p].next = n;
++	q->dep[n].prev = p;
++	d = q->qs[x].qlen;
++	if (q->max_depth < d)
++		q->max_depth = d;
++
++	esfq_link(q, x);
++}
++
++static unsigned int esfq_drop(struct Qdisc *sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_index d = q->max_depth;
++	struct sk_buff *skb;
++	unsigned int len;
++
++	/* Queue is full! Find the longest slot and
++	   drop a packet from it */
++
++	if (d > 1) {
++		esfq_index x = q->dep[d+q->depth].next;
++		skb = q->qs[x].prev;
++		len = skb->len;
++		__skb_unlink(skb, &q->qs[x]);
++		kfree_skb(skb);
++		esfq_dec(q, x);
++		sch->q.qlen--;
++		sch->qstats.drops++;
++		sch->qstats.backlog -= len;
++		return len;
++	}
++
++	if (d == 1) {
++		/* It is difficult to believe, but ALL THE SLOTS HAVE LENGTH 1. */
++		d = q->next[q->tail];
++		q->next[q->tail] = q->next[d];
++		q->allot[q->next[d]] += q->quantum;
++		skb = q->qs[d].prev;
++		len = skb->len;
++		__skb_unlink(skb, &q->qs[d]);
++		kfree_skb(skb);
++		esfq_dec(q, d);
++		sch->q.qlen--;
++		q->ht[q->hash[d]] = q->depth;
++		sch->qstats.drops++;
++		sch->qstats.backlog -= len;
++		return len;
++	}
++
++	return 0;
++}
++
++static void esfq_q_enqueue(struct sk_buff *skb, struct esfq_sched_data *q, unsigned int end)
++{
++	unsigned hash = esfq_hash(q, skb);
++	unsigned depth = q->depth;
++	esfq_index x;
++
++	x = q->ht[hash];
++	if (x == depth) {
++		q->ht[hash] = x = q->dep[depth].next;
++		q->hash[x] = hash;
++	}
++
++	if (end == ESFQ_TAIL)
++		__skb_queue_tail(&q->qs[x], skb);
++	else
++		__skb_queue_head(&q->qs[x], skb);
++
++	esfq_inc(q, x);
++	if (q->qs[x].qlen == 1) {		/* The flow is new */
++		if (q->tail == depth) {	/* It is the first flow */
++			q->tail = x;
++			q->next[x] = x;
++			q->allot[x] = q->quantum;
++		} else {
++			q->next[x] = q->next[q->tail];
++			q->next[q->tail] = x;
++			q->tail = x;
++		}
++	}
++}
++
++static int esfq_enqueue(struct sk_buff *skb, struct Qdisc* sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_q_enqueue(skb, q, ESFQ_TAIL);
++	sch->qstats.backlog += skb->len;
++	if (++sch->q.qlen < q->limit-1) {
++		sch->bstats.bytes += skb->len;
++		sch->bstats.packets++;
++		return 0;
++	}
++
++	sch->qstats.drops++;
++	esfq_drop(sch);
++	return NET_XMIT_CN;
++}
++
++static struct sk_buff *esfq_peek(struct Qdisc* sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_index a;
++
++	/* No active slots */
++	if (q->tail == q->depth)
++		return NULL;
++
++	a = q->next[q->tail];
++	return skb_peek(&q->qs[a]);
++}
++
++static struct sk_buff *esfq_q_dequeue(struct esfq_sched_data *q)
++{
++	struct sk_buff *skb;
++	unsigned depth = q->depth;
++	esfq_index a, old_a;
++
++	/* No active slots */
++	if (q->tail == depth)
++		return NULL;
++
++	a = old_a = q->next[q->tail];
++
++	/* Grab packet */
++	skb = __skb_dequeue(&q->qs[a]);
++	esfq_dec(q, a);
++
++	/* Is the slot empty? */
++	if (q->qs[a].qlen == 0) {
++		q->ht[q->hash[a]] = depth;
++		a = q->next[a];
++		if (a == old_a) {
++			q->tail = depth;
++			return skb;
++		}
++		q->next[q->tail] = a;
++		q->allot[a] += q->quantum;
++	} else if ((q->allot[a] -= skb->len) <= 0) {
++		q->tail = a;
++		a = q->next[a];
++		q->allot[a] += q->quantum;
++	}
++
++	return skb;
++}
++
++static struct sk_buff *esfq_dequeue(struct Qdisc* sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	struct sk_buff *skb;
++
++	skb = esfq_q_dequeue(q);
++	if (skb == NULL)
++		return NULL;
++	sch->q.qlen--;
++	sch->qstats.backlog -= skb->len;
++	return skb;
++}
++
++static void esfq_q_destroy(struct esfq_sched_data *q)
++{
++	del_timer(&q->perturb_timer);
++	if(q->ht)
++		kfree(q->ht);
++	if(q->dep)
++		kfree(q->dep);
++	if(q->next)
++		kfree(q->next);
++	if(q->allot)
++		kfree(q->allot);
++	if(q->hash)
++		kfree(q->hash);
++	if(q->qs)
++		kfree(q->qs);
++}
++
++static void esfq_destroy(struct Qdisc *sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_q_destroy(q);
++}
++
++
++static void esfq_reset(struct Qdisc* sch)
++{
++	struct sk_buff *skb;
++
++	while ((skb = esfq_dequeue(sch)) != NULL)
++		kfree_skb(skb);
++}
++
++static void esfq_perturbation(unsigned long arg)
++{
++	struct Qdisc *sch = (struct Qdisc*)arg;
++	struct esfq_sched_data *q = qdisc_priv(sch);
++
++	q->perturbation = net_random()&0x1F;
++
++	if (q->perturb_period) {
++		q->perturb_timer.expires = jiffies + q->perturb_period;
++		add_timer(&q->perturb_timer);
++	}
++}
++
++static unsigned int esfq_check_hash(unsigned int kind)
++{
++	switch (kind) {
++	case TCA_SFQ_HASH_CTORIGDST:
++	case TCA_SFQ_HASH_CTORIGSRC:
++	case TCA_SFQ_HASH_CTREPLDST:
++	case TCA_SFQ_HASH_CTREPLSRC:
++	case TCA_SFQ_HASH_CTNATCHG:
++#ifndef CONFIG_NET_SCH_ESFQ_NFCT
++	{
++		if (net_ratelimit())
++			printk(KERN_WARNING "ESFQ: Conntrack hash types disabled in kernel config. Falling back to classic.\n");
++		return TCA_SFQ_HASH_CLASSIC;
++	}
++#endif
++	case TCA_SFQ_HASH_CLASSIC:
++	case TCA_SFQ_HASH_DST:
++	case TCA_SFQ_HASH_SRC:
++	case TCA_SFQ_HASH_FWMARK:
++		return kind;
++	default:
++	{
++		if (net_ratelimit())
++			printk(KERN_WARNING "ESFQ: Unknown hash type. Falling back to classic.\n");
++		return TCA_SFQ_HASH_CLASSIC;
++	}
++	}
++}
++
++static int esfq_q_init(struct esfq_sched_data *q, struct nlattr *opt)
++{
++	struct tc_esfq_qopt *ctl = nla_data(opt);
++	esfq_index p = ~0U/2;
++	int i;
++
++	if (opt && opt->nla_len < nla_attr_size(sizeof(*ctl)))
++		return -EINVAL;
++
++	q->perturbation = 0;
++	q->hash_kind = TCA_SFQ_HASH_CLASSIC;
++	q->max_depth = 0;
++	if (opt == NULL) {
++		q->perturb_period = 0;
++		q->hash_divisor = 1024;
++		q->tail = q->limit = q->depth = 128;
++
++	} else {
++		struct tc_esfq_qopt *ctl = nla_data(opt);
++		if (ctl->quantum)
++			q->quantum = ctl->quantum;
++		q->perturb_period = ctl->perturb_period*HZ;
++		q->hash_divisor = ctl->divisor ? : 1024;
++		q->tail = q->limit = q->depth = ctl->flows ? : 128;
++
++		if ( q->depth > p - 1 )
++			return -EINVAL;
++
++		if (ctl->limit)
++			q->limit = min_t(u32, ctl->limit, q->depth);
++
++		if (ctl->hash_kind) {
++			q->hash_kind = esfq_check_hash(ctl->hash_kind);
++		}
++	}
++
++	q->ht = kmalloc(q->hash_divisor*sizeof(esfq_index), GFP_KERNEL);
++	if (!q->ht)
++		goto err_case;
++	q->dep = kmalloc((1+q->depth*2)*sizeof(struct esfq_head), GFP_KERNEL);
++	if (!q->dep)
++		goto err_case;
++	q->next = kmalloc(q->depth*sizeof(esfq_index), GFP_KERNEL);
++	if (!q->next)
++		goto err_case;
++	q->allot = kmalloc(q->depth*sizeof(short), GFP_KERNEL);
++	if (!q->allot)
++		goto err_case;
++	q->hash = kmalloc(q->depth*sizeof(unsigned short), GFP_KERNEL);
++	if (!q->hash)
++		goto err_case;
++	q->qs = kmalloc(q->depth*sizeof(struct sk_buff_head), GFP_KERNEL);
++	if (!q->qs)
++		goto err_case;
++
++	for (i=0; i< q->hash_divisor; i++)
++		q->ht[i] = q->depth;
++	for (i=0; i<q->depth; i++) {
++		skb_queue_head_init(&q->qs[i]);
++		q->dep[i+q->depth].next = i+q->depth;
++		q->dep[i+q->depth].prev = i+q->depth;
++	}
++
++	for (i=0; i<q->depth; i++)
++		esfq_link(q, i);
++	return 0;
++err_case:
++	esfq_q_destroy(q);
++	return -ENOBUFS;
++}
++
++static int esfq_init(struct Qdisc *sch, struct nlattr *opt)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	int err;
++
++	q->quantum = psched_mtu(qdisc_dev(sch)); /* default */
++	if ((err = esfq_q_init(q, opt)))
++		return err;
++
++	init_timer(&q->perturb_timer);
++	q->perturb_timer.data = (unsigned long)sch;
++	q->perturb_timer.function = esfq_perturbation;
++	if (q->perturb_period) {
++		q->perturb_timer.expires = jiffies + q->perturb_period;
++		add_timer(&q->perturb_timer);
++	}
++
++	return 0;
++}
++
++static int esfq_change(struct Qdisc *sch, struct nlattr *opt)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	struct esfq_sched_data new;
++	struct sk_buff *skb;
++	int err;
++
++	/* set up new queue */
++	memset(&new, 0, sizeof(struct esfq_sched_data));
++	new.quantum = psched_mtu(qdisc_dev(sch)); /* default */
++	if ((err = esfq_q_init(&new, opt)))
++		return err;
++
++	/* copy all packets from the old queue to the new queue */
++	sch_tree_lock(sch);
++	while ((skb = esfq_q_dequeue(q)) != NULL)
++		esfq_q_enqueue(skb, &new, ESFQ_TAIL);
++
++	/* clean up the old queue */
++	esfq_q_destroy(q);
++
++	/* copy elements of the new queue into the old queue */
++	q->perturb_period = new.perturb_period;
++	q->quantum        = new.quantum;
++	q->limit          = new.limit;
++	q->depth          = new.depth;
++	q->hash_divisor   = new.hash_divisor;
++	q->hash_kind      = new.hash_kind;
++	q->tail           = new.tail;
++	q->max_depth      = new.max_depth;
++	q->ht    = new.ht;
++	q->dep   = new.dep;
++	q->next  = new.next;
++	q->allot = new.allot;
++	q->hash  = new.hash;
++	q->qs    = new.qs;
++
++	/* finish up */
++	if (q->perturb_period) {
++		q->perturb_timer.expires = jiffies + q->perturb_period;
++		add_timer(&q->perturb_timer);
++	} else {
++		q->perturbation = 0;
++	}
++	sch_tree_unlock(sch);
++	return 0;
++}
++
++static int esfq_dump(struct Qdisc *sch, struct sk_buff *skb)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	unsigned char *b = skb_tail_pointer(skb);
++	struct tc_esfq_qopt opt;
++
++	opt.quantum = q->quantum;
++	opt.perturb_period = q->perturb_period/HZ;
++
++	opt.limit = q->limit;
++	opt.divisor = q->hash_divisor;
++	opt.flows = q->depth;
++	opt.hash_kind = q->hash_kind;
++
++	NLA_PUT(skb, TCA_OPTIONS, sizeof(opt), &opt);
++
++	return skb->len;
++
++nla_put_failure:
++	nlmsg_trim(skb, b);
++	return -1;
++}
++
++static struct Qdisc_ops esfq_qdisc_ops =
++{
++	.next		=	NULL,
++	.cl_ops		=	NULL,
++	.id		=	"esfq",
++	.priv_size	=	sizeof(struct esfq_sched_data),
++	.enqueue	=	esfq_enqueue,
++	.dequeue	=	esfq_dequeue,
++	.peek		=	esfq_peek,
++	.drop		=	esfq_drop,
++	.init		=	esfq_init,
++	.reset		=	esfq_reset,
++	.destroy	=	esfq_destroy,
++	.change		=	esfq_change,
++	.dump		=	esfq_dump,
++	.owner		=	THIS_MODULE,
++};
++
++static int __init esfq_module_init(void)
++{
++	return register_qdisc(&esfq_qdisc_ops);
++}
++static void __exit esfq_module_exit(void)
++{
++	unregister_qdisc(&esfq_qdisc_ops);
++}
++module_init(esfq_module_init)
++module_exit(esfq_module_exit)
++MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/patches-2.6.32/201-jhash3.patch b/target/linux/generic/patches-2.6.32/201-jhash3.patch
new file mode 100644
index 0000000000..0218fa19c5
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/201-jhash3.patch
@@ -0,0 +1,227 @@
+--- a/include/linux/jhash.h
++++ b/include/linux/jhash.h
+@@ -3,80 +3,95 @@
+ 
+ /* jhash.h: Jenkins hash support.
+  *
+- * Copyright (C) 1996 Bob Jenkins (bob_jenkins@burtleburtle.net)
++ * Copyright (C) 2006. Bob Jenkins (bob_jenkins@burtleburtle.net)
+  *
+  * http://burtleburtle.net/bob/hash/
+  *
+  * These are the credits from Bob's sources:
+  *
+- * lookup2.c, by Bob Jenkins, December 1996, Public Domain.
+- * hash(), hash2(), hash3, and mix() are externally useful functions.
+- * Routines to test the hash are included if SELF_TEST is defined.
+- * You can use this free for any purpose.  It has no warranty.
++ * lookup3.c, by Bob Jenkins, May 2006, Public Domain.
+  *
+- * Copyright (C) 2003 David S. Miller (davem@redhat.com)
++ * These are functions for producing 32-bit hashes for hash table lookup.
++ * hashword(), hashlittle(), hashlittle2(), hashbig(), mix(), and final() 
++ * are externally useful functions.  Routines to test the hash are included 
++ * if SELF_TEST is defined.  You can use this free for any purpose.  It's in
++ * the public domain.  It has no warranty.
++ *
++ * Copyright (C) 2009 Jozsef Kadlecsik (kadlec@blackhole.kfki.hu)
+  *
+  * I've modified Bob's hash to be useful in the Linux kernel, and
+- * any bugs present are surely my fault.  -DaveM
++ * any bugs present are my fault.  Jozsef
+  */
+ 
+-/* NOTE: Arguments are modified. */
+-#define __jhash_mix(a, b, c) \
++#define __rot(x,k) (((x)<<(k)) | ((x)>>(32-(k))))
++
++/* __jhash_mix - mix 3 32-bit values reversibly. */
++#define __jhash_mix(a,b,c) \
++{ \
++  a -= c;  a ^= __rot(c, 4);  c += b; \
++  b -= a;  b ^= __rot(a, 6);  a += c; \
++  c -= b;  c ^= __rot(b, 8);  b += a; \
++  a -= c;  a ^= __rot(c,16);  c += b; \
++  b -= a;  b ^= __rot(a,19);  a += c; \
++  c -= b;  c ^= __rot(b, 4);  b += a; \
++}
++
++/* __jhash_final - final mixing of 3 32-bit values (a,b,c) into c */
++#define __jhash_final(a,b,c) \
+ { \
+-  a -= b; a -= c; a ^= (c>>13); \
+-  b -= c; b -= a; b ^= (a<<8); \
+-  c -= a; c -= b; c ^= (b>>13); \
+-  a -= b; a -= c; a ^= (c>>12);  \
+-  b -= c; b -= a; b ^= (a<<16); \
+-  c -= a; c -= b; c ^= (b>>5); \
+-  a -= b; a -= c; a ^= (c>>3);  \
+-  b -= c; b -= a; b ^= (a<<10); \
+-  c -= a; c -= b; c ^= (b>>15); \
++  c ^= b; c -= __rot(b,14); \
++  a ^= c; a -= __rot(c,11); \
++  b ^= a; b -= __rot(a,25); \
++  c ^= b; c -= __rot(b,16); \
++  a ^= c; a -= __rot(c,4);  \
++  b ^= a; b -= __rot(a,14); \
++  c ^= b; c -= __rot(b,24); \
+ }
+ 
+-/* The golden ration: an arbitrary value */
+-#define JHASH_GOLDEN_RATIO	0x9e3779b9
++/* An arbitrary initial parameter */
++#define JHASH_GOLDEN_RATIO	0xdeadbeef
+ 
+ /* The most generic version, hashes an arbitrary sequence
+  * of bytes.  No alignment or length assumptions are made about
+- * the input key.
++ * the input key. The result depends on endianness.
+  */
+ static inline u32 jhash(const void *key, u32 length, u32 initval)
+ {
+-	u32 a, b, c, len;
++	u32 a,b,c;
+ 	const u8 *k = key;
+ 
+-	len = length;
+-	a = b = JHASH_GOLDEN_RATIO;
+-	c = initval;
+-
+-	while (len >= 12) {
+-		a += (k[0] +((u32)k[1]<<8) +((u32)k[2]<<16) +((u32)k[3]<<24));
+-		b += (k[4] +((u32)k[5]<<8) +((u32)k[6]<<16) +((u32)k[7]<<24));
+-		c += (k[8] +((u32)k[9]<<8) +((u32)k[10]<<16)+((u32)k[11]<<24));
+-
+-		__jhash_mix(a,b,c);
++	/* Set up the internal state */
++	a = b = c = JHASH_GOLDEN_RATIO + length + initval;
+ 
++	/* all but the last block: affect some 32 bits of (a,b,c) */
++	while (length > 12) {
++    		a += (k[0] + ((u32)k[1]<<8) + ((u32)k[2]<<16) + ((u32)k[3]<<24));
++		b += (k[4] + ((u32)k[5]<<8) + ((u32)k[6]<<16) + ((u32)k[7]<<24));
++		c += (k[8] + ((u32)k[9]<<8) + ((u32)k[10]<<16) + ((u32)k[11]<<24));
++		__jhash_mix(a, b, c);
++		length -= 12;
+ 		k += 12;
+-		len -= 12;
+ 	}
+ 
+-	c += length;
+-	switch (len) {
+-	case 11: c += ((u32)k[10]<<24);
+-	case 10: c += ((u32)k[9]<<16);
+-	case 9 : c += ((u32)k[8]<<8);
+-	case 8 : b += ((u32)k[7]<<24);
+-	case 7 : b += ((u32)k[6]<<16);
+-	case 6 : b += ((u32)k[5]<<8);
++	/* last block: affect all 32 bits of (c) */
++	/* all the case statements fall through */
++	switch (length) {
++	case 12: c += (u32)k[11]<<24;
++	case 11: c += (u32)k[10]<<16;
++	case 10: c += (u32)k[9]<<8;
++	case 9 : c += k[8];
++	case 8 : b += (u32)k[7]<<24;
++	case 7 : b += (u32)k[6]<<16;
++	case 6 : b += (u32)k[5]<<8;
+ 	case 5 : b += k[4];
+-	case 4 : a += ((u32)k[3]<<24);
+-	case 3 : a += ((u32)k[2]<<16);
+-	case 2 : a += ((u32)k[1]<<8);
++	case 4 : a += (u32)k[3]<<24;
++	case 3 : a += (u32)k[2]<<16;
++	case 2 : a += (u32)k[1]<<8;
+ 	case 1 : a += k[0];
+-	};
+-
+-	__jhash_mix(a,b,c);
++		__jhash_final(a, b, c);
++	case 0 :
++		break;
++	}
+ 
+ 	return c;
+ }
+@@ -86,58 +101,57 @@ static inline u32 jhash(const void *key,
+  */
+ static inline u32 jhash2(const u32 *k, u32 length, u32 initval)
+ {
+-	u32 a, b, c, len;
++	u32 a, b, c;
+ 
+-	a = b = JHASH_GOLDEN_RATIO;
+-	c = initval;
+-	len = length;
++	/* Set up the internal state */
++	a = b = c = JHASH_GOLDEN_RATIO + (length<<2) + initval;
+ 
+-	while (len >= 3) {
++	/* handle most of the key */
++	while (length > 3) {
+ 		a += k[0];
+ 		b += k[1];
+ 		c += k[2];
+ 		__jhash_mix(a, b, c);
+-		k += 3; len -= 3;
++		length -= 3;
++		k += 3;
+ 	}
+ 
+-	c += length * 4;
+-
+-	switch (len) {
+-	case 2 : b += k[1];
+-	case 1 : a += k[0];
+-	};
+-
+-	__jhash_mix(a,b,c);
++	/* handle the last 3 u32's */
++	/* all the case statements fall through */ 
++	switch (length) {
++	case 3: c += k[2];
++	case 2: b += k[1];
++	case 1: a += k[0];
++		__jhash_final(a, b, c);
++	case 0:     /* case 0: nothing left to add */
++		break;
++	}
+ 
+ 	return c;
+ }
+ 
+-
+ /* A special ultra-optimized versions that knows they are hashing exactly
+  * 3, 2 or 1 word(s).
+- *
+- * NOTE: In partilar the "c += length; __jhash_mix(a,b,c);" normally
+- *       done at the end is not done here.
+  */
+ static inline u32 jhash_3words(u32 a, u32 b, u32 c, u32 initval)
+ {
+-	a += JHASH_GOLDEN_RATIO;
+-	b += JHASH_GOLDEN_RATIO;
+-	c += initval;
++	a += JHASH_GOLDEN_RATIO + initval;
++	b += JHASH_GOLDEN_RATIO + initval;
++	c += JHASH_GOLDEN_RATIO + initval;
+ 
+-	__jhash_mix(a, b, c);
++	__jhash_final(a, b, c);
+ 
+ 	return c;
+ }
+ 
+ static inline u32 jhash_2words(u32 a, u32 b, u32 initval)
+ {
+-	return jhash_3words(a, b, 0, initval);
++	return jhash_3words(0, a, b, initval);
+ }
+ 
+ static inline u32 jhash_1word(u32 a, u32 initval)
+ {
+-	return jhash_3words(a, 0, 0, initval);
++	return jhash_3words(0, 0, a, initval);
+ }
+ 
+ #endif /* _LINUX_JHASH_H */
diff --git a/target/linux/generic/patches-2.6.32/202-mips_mem_functions_performance.patch b/target/linux/generic/patches-2.6.32/202-mips_mem_functions_performance.patch
new file mode 100644
index 0000000000..6ea9ba51ee
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/202-mips_mem_functions_performance.patch
@@ -0,0 +1,83 @@
+--- a/arch/mips/include/asm/string.h
++++ b/arch/mips/include/asm/string.h
+@@ -133,11 +133,44 @@ strncmp(__const__ char *__cs, __const__ 
+ 
+ #define __HAVE_ARCH_MEMSET
+ extern void *memset(void *__s, int __c, size_t __count);
++#define memset(__s, __c, len)					\
++({								\
++	size_t __len = (len);					\
++	void *__ret;						\
++	if (__builtin_constant_p(len) && __len >= 64)		\
++		__ret = memset((__s), (__c), __len);		\
++	else							\
++		__ret = __builtin_memset((__s), (__c), __len);	\
++	__ret;							\
++})
+ 
+ #define __HAVE_ARCH_MEMCPY
+ extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
++#define memcpy(dst, src, len)					\
++({								\
++	size_t __len = (len);					\
++	void *__ret;						\
++	if (__builtin_constant_p(len) && __len >= 64)		\
++		__ret = memcpy((dst), (src), __len);		\
++	else							\
++		__ret = __builtin_memcpy((dst), (src), __len);	\
++	__ret;							\
++})
+ 
+ #define __HAVE_ARCH_MEMMOVE
+ extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
++#define memmove(dst, src, len)					\
++({								\
++	size_t __len = (len);					\
++	void *__ret;						\
++	if (__builtin_constant_p(len) && __len >= 64)		\
++		__ret = memmove((dst), (src), __len);		\
++	else							\
++		__ret = __builtin_memmove((dst), (src), __len);	\
++	__ret;							\
++})
++
++#define __HAVE_ARCH_MEMCMP
++#define memcmp(src1, src2, len) __builtin_memcmp((src1), (src2), (len))
+ 
+ #endif /* _ASM_STRING_H */
+--- a/arch/mips/lib/Makefile
++++ b/arch/mips/lib/Makefile
+@@ -3,7 +3,7 @@
+ #
+ 
+ lib-y	+= csum_partial.o delay.o memcpy.o memcpy-inatomic.o memset.o \
+-	   strlen_user.o strncpy_user.o strnlen_user.o uncached.o
++	   strlen_user.o strncpy_user.o strnlen_user.o uncached.o memcmp.o
+ 
+ obj-y			+= iomap.o
+ obj-$(CONFIG_PCI)	+= iomap-pci.o
+--- /dev/null
++++ b/arch/mips/lib/memcmp.c
+@@ -0,0 +1,22 @@
++/*
++ *  copied from linux/lib/string.c
++ *
++ *  Copyright (C) 1991, 1992  Linus Torvalds
++ */
++
++#include <linux/module.h>
++#include <linux/string.h>
++
++#undef memcmp
++int memcmp(const void *cs, const void *ct, size_t count)
++{
++	const unsigned char *su1, *su2;
++	int res = 0;
++
++	for (su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--)
++		if ((res = *su1 - *su2) != 0)
++			break;
++	return res;
++}
++EXPORT_SYMBOL(memcmp);
++
diff --git a/target/linux/generic/patches-2.6.32/203-slab_maxsize.patch b/target/linux/generic/patches-2.6.32/203-slab_maxsize.patch
new file mode 100644
index 0000000000..0c1ae72a4e
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/203-slab_maxsize.patch
@@ -0,0 +1,13 @@
+--- a/include/linux/slab.h
++++ b/include/linux/slab.h
+@@ -124,8 +124,8 @@ int kmem_ptr_validate(struct kmem_cache 
+  * to do various tricks to work around compiler limitations in order to
+  * ensure proper constant folding.
+  */
+-#define KMALLOC_SHIFT_HIGH	((MAX_ORDER + PAGE_SHIFT - 1) <= 25 ? \
+-				(MAX_ORDER + PAGE_SHIFT - 1) : 25)
++#define KMALLOC_SHIFT_HIGH	((MAX_ORDER + PAGE_SHIFT - 1) <= 17 ? \
++				(MAX_ORDER + PAGE_SHIFT - 1) : 17)
+ 
+ #define KMALLOC_MAX_SIZE	(1UL << KMALLOC_SHIFT_HIGH)
+ #define KMALLOC_MAX_ORDER	(KMALLOC_SHIFT_HIGH - PAGE_SHIFT)
diff --git a/target/linux/generic/patches-2.6.32/204-jffs2_eofdetect.patch b/target/linux/generic/patches-2.6.32/204-jffs2_eofdetect.patch
new file mode 100644
index 0000000000..16d3e1f8e8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/204-jffs2_eofdetect.patch
@@ -0,0 +1,132 @@
+--- a/fs/jffs2/build.c
++++ b/fs/jffs2/build.c
+@@ -111,6 +111,17 @@ static int jffs2_build_filesystem(struct
+ 	dbg_fsbuild("scanned flash completely\n");
+ 	jffs2_dbg_dump_block_lists_nolock(c);
+ 
++	if (c->flags & (1 << 7)) {
++		printk("%s(): unlocking the mtd device... ", __func__);
++		if (c->mtd->unlock)
++			c->mtd->unlock(c->mtd, 0, c->mtd->size);
++		printk("done.\n");
++
++		printk("%s(): erasing all blocks after the end marker... ", __func__);
++		jffs2_erase_pending_blocks(c, -1);
++		printk("done.\n");
++	}
++
+ 	dbg_fsbuild("pass 1 starting\n");
+ 	c->flags |= JFFS2_SB_FLAG_BUILDING;
+ 	/* Now scan the directory tree, increasing nlink according to every dirent found. */
+--- a/fs/jffs2/scan.c
++++ b/fs/jffs2/scan.c
+@@ -72,7 +72,7 @@ static int file_dirty(struct jffs2_sb_in
+ 		return ret;
+ 	if ((ret = jffs2_scan_dirty_space(c, jeb, jeb->free_size)))
+ 		return ret;
+-	/* Turned wasted size into dirty, since we apparently 
++	/* Turned wasted size into dirty, since we apparently
+ 	   think it's recoverable now. */
+ 	jeb->dirty_size += jeb->wasted_size;
+ 	c->dirty_size += jeb->wasted_size;
+@@ -144,8 +144,11 @@ int jffs2_scan_medium(struct jffs2_sb_in
+ 		/* reset summary info for next eraseblock scan */
+ 		jffs2_sum_reset_collected(s);
+ 
+-		ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
+-						buf_size, s);
++		if (c->flags & (1 << 7))
++			ret = BLK_STATE_ALLFF;
++		else
++			ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
++							buf_size, s);
+ 
+ 		if (ret < 0)
+ 			goto out;
+@@ -400,7 +403,7 @@ static int jffs2_scan_xref_node(struct j
+ 	if (!ref)
+ 		return -ENOMEM;
+ 
+-	/* BEFORE jffs2_build_xattr_subsystem() called, 
++	/* BEFORE jffs2_build_xattr_subsystem() called,
+ 	 * and AFTER xattr_ref is marked as a dead xref,
+ 	 * ref->xid is used to store 32bit xid, xd is not used
+ 	 * ref->ino is used to store 32bit inode-number, ic is not used
+@@ -473,7 +476,7 @@ static int jffs2_scan_eraseblock (struct
+ 		struct jffs2_sum_marker *sm;
+ 		void *sumptr = NULL;
+ 		uint32_t sumlen;
+-	      
++
+ 		if (!buf_size) {
+ 			/* XIP case. Just look, point at the summary if it's there */
+ 			sm = (void *)buf + c->sector_size - sizeof(*sm);
+@@ -489,9 +492,9 @@ static int jffs2_scan_eraseblock (struct
+ 				buf_len = sizeof(*sm);
+ 
+ 			/* Read as much as we want into the _end_ of the preallocated buffer */
+-			err = jffs2_fill_scan_buf(c, buf + buf_size - buf_len, 
++			err = jffs2_fill_scan_buf(c, buf + buf_size - buf_len,
+ 						  jeb->offset + c->sector_size - buf_len,
+-						  buf_len);				
++						  buf_len);
+ 			if (err)
+ 				return err;
+ 
+@@ -510,9 +513,9 @@ static int jffs2_scan_eraseblock (struct
+ 				}
+ 				if (buf_len < sumlen) {
+ 					/* Need to read more so that the entire summary node is present */
+-					err = jffs2_fill_scan_buf(c, sumptr, 
++					err = jffs2_fill_scan_buf(c, sumptr,
+ 								  jeb->offset + c->sector_size - sumlen,
+-								  sumlen - buf_len);				
++								  sumlen - buf_len);
+ 					if (err)
+ 						return err;
+ 				}
+@@ -525,7 +528,7 @@ static int jffs2_scan_eraseblock (struct
+ 
+ 			if (buf_size && sumlen > buf_size)
+ 				kfree(sumptr);
+-			/* If it returns with a real error, bail. 
++			/* If it returns with a real error, bail.
+ 			   If it returns positive, that's a block classification
+ 			   (i.e. BLK_STATE_xxx) so return that too.
+ 			   If it returns zero, fall through to full scan. */
+@@ -546,6 +549,17 @@ static int jffs2_scan_eraseblock (struct
+ 			return err;
+ 	}
+ 
++	if ((buf[0] == 0xde) &&
++		(buf[1] == 0xad) &&
++		(buf[2] == 0xc0) &&
++		(buf[3] == 0xde)) {
++		/* end of filesystem. erase everything after this point */
++		printk("%s(): End of filesystem marker found at 0x%x\n", __func__, jeb->offset);
++		c->flags |= (1 << 7);
++
++		return BLK_STATE_ALLFF;
++	}
++
+ 	/* We temporarily use 'ofs' as a pointer into the buffer/jeb */
+ 	ofs = 0;
+ 
+@@ -671,7 +685,7 @@ scan_more:
+ 				scan_end = buf_len;
+ 				goto more_empty;
+ 			}
+-			
++
+ 			/* See how much more there is to read in this eraseblock... */
+ 			buf_len = min_t(uint32_t, buf_size, jeb->offset + c->sector_size - ofs);
+ 			if (!buf_len) {
+@@ -907,7 +921,7 @@ scan_more:
+ 
+ 	D1(printk(KERN_DEBUG "Block at 0x%08x: free 0x%08x, dirty 0x%08x, unchecked 0x%08x, used 0x%08x, wasted 0x%08x\n",
+ 		  jeb->offset,jeb->free_size, jeb->dirty_size, jeb->unchecked_size, jeb->used_size, jeb->wasted_size));
+-	
++
+ 	/* mark_node_obsolete can add to wasted !! */
+ 	if (jeb->wasted_size) {
+ 		jeb->dirty_size += jeb->wasted_size;
diff --git a/target/linux/generic/patches-2.6.32/205-skb_padding.patch b/target/linux/generic/patches-2.6.32/205-skb_padding.patch
new file mode 100644
index 0000000000..face44c0a3
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/205-skb_padding.patch
@@ -0,0 +1,56 @@
+--- a/include/linux/skbuff.h
++++ b/include/linux/skbuff.h
+@@ -1384,11 +1384,18 @@ static inline int skb_network_offset(con
+  *
+  * Various parts of the networking layer expect at least 32 bytes of
+  * headroom, you should not reduce this.
++ *
++ * This has been changed to 64 to acommodate for routing between ethernet
++ * and wireless, but only for new allocations
+  */
+ #ifndef NET_SKB_PAD
+ #define NET_SKB_PAD	32
+ #endif
+ 
++#ifndef NET_SKB_PAD_ALLOC
++#define NET_SKB_PAD_ALLOC	64
++#endif
++
+ extern int ___pskb_trim(struct sk_buff *skb, unsigned int len);
+ 
+ static inline void __skb_trim(struct sk_buff *skb, unsigned int len)
+@@ -1478,9 +1485,9 @@ static inline void __skb_queue_purge(str
+ static inline struct sk_buff *__dev_alloc_skb(unsigned int length,
+ 					      gfp_t gfp_mask)
+ {
+-	struct sk_buff *skb = alloc_skb(length + NET_SKB_PAD, gfp_mask);
++	struct sk_buff *skb = alloc_skb(length + NET_SKB_PAD_ALLOC, gfp_mask);
+ 	if (likely(skb))
+-		skb_reserve(skb, NET_SKB_PAD);
++		skb_reserve(skb, NET_SKB_PAD_ALLOC);
+ 	return skb;
+ }
+ 
+@@ -1553,7 +1560,7 @@ static inline int __skb_cow(struct sk_bu
+ 		delta = headroom - skb_headroom(skb);
+ 
+ 	if (delta || cloned)
+-		return pskb_expand_head(skb, ALIGN(delta, NET_SKB_PAD), 0,
++		return pskb_expand_head(skb, ALIGN(delta, NET_SKB_PAD_ALLOC), 0,
+ 					GFP_ATOMIC);
+ 	return 0;
+ }
+--- a/net/core/skbuff.c
++++ b/net/core/skbuff.c
+@@ -339,9 +339,9 @@ struct sk_buff *__netdev_alloc_skb(struc
+ 	int node = dev->dev.parent ? dev_to_node(dev->dev.parent) : -1;
+ 	struct sk_buff *skb;
+ 
+-	skb = __alloc_skb(length + NET_SKB_PAD, gfp_mask, 0, node);
++	skb = __alloc_skb(length + NET_SKB_PAD_ALLOC, gfp_mask, 0, node);
+ 	if (likely(skb)) {
+-		skb_reserve(skb, NET_SKB_PAD);
++		skb_reserve(skb, NET_SKB_PAD_ALLOC);
+ 		skb->dev = dev;
+ 	}
+ 	return skb;
diff --git a/target/linux/generic/patches-2.6.32/207-powerpc_asm_segment_h.patch b/target/linux/generic/patches-2.6.32/207-powerpc_asm_segment_h.patch
new file mode 100644
index 0000000000..1272e82c75
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/207-powerpc_asm_segment_h.patch
@@ -0,0 +1,9 @@
+--- /dev/null
++++ b/include/asm-powerpc/segment.h
+@@ -0,0 +1,6 @@
++#ifndef _ASM_SEGMENT_H
++#define _ASM_SEGMENT_H
++
++/* Only here because we have some old header files that expect it.. */
++
++#endif /* _ASM_SEGMENT_H */
diff --git a/target/linux/generic/patches-2.6.32/208-mips_oprofile_fix.patch b/target/linux/generic/patches-2.6.32/208-mips_oprofile_fix.patch
new file mode 100644
index 0000000000..2e019dba2c
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/208-mips_oprofile_fix.patch
@@ -0,0 +1,47 @@
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -48,7 +48,9 @@ ifneq ($(SUBARCH),$(ARCH))
+   endif
+ endif
+ 
++ifndef CONFIG_PROFILING
+ cflags-y := -ffunction-sections
++endif
+ cflags-y += $(call cc-option, -mno-check-zero-division)
+ 
+ ifdef CONFIG_32BIT
+--- a/arch/mips/oprofile/op_model_mipsxx.c
++++ b/arch/mips/oprofile/op_model_mipsxx.c
+@@ -298,6 +298,11 @@ static void reset_counters(void *arg)
+ 	}
+ }
+ 
++static irqreturn_t mipsxx_perfcount_int(int irq, void *dev_id)
++{
++	return mipsxx_perfcount_handler();
++}
++
+ static int __init mipsxx_init(void)
+ {
+ 	int counters;
+@@ -374,6 +379,10 @@ static int __init mipsxx_init(void)
+ 	save_perf_irq = perf_irq;
+ 	perf_irq = mipsxx_perfcount_handler;
+ 
++	if (cp0_perfcount_irq >= 0)
++		return request_irq(cp0_perfcount_irq, mipsxx_perfcount_int,
++			IRQF_SHARED, "Perfcounter", save_perf_irq);
++
+ 	return 0;
+ }
+ 
+@@ -381,6 +390,9 @@ static void mipsxx_exit(void)
+ {
+ 	int counters = op_model_mipsxx_ops.num_counters;
+ 
++	if (cp0_perfcount_irq >= 0)
++		free_irq(cp0_perfcount_irq, save_perf_irq);
++
+ 	counters = counters_per_cpu_to_total(counters);
+ 	on_each_cpu(reset_counters, (void *)(long)counters, 1);
+ 
diff --git a/target/linux/generic/patches-2.6.32/209-mini_fo.patch b/target/linux/generic/patches-2.6.32/209-mini_fo.patch
new file mode 100644
index 0000000000..0b4091c64e
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/209-mini_fo.patch
@@ -0,0 +1,7780 @@
+--- a/fs/Kconfig
++++ b/fs/Kconfig
+@@ -180,6 +180,7 @@ source "fs/ubifs/Kconfig"
+ source "fs/cramfs/Kconfig"
+ source "fs/squashfs/Kconfig"
+ source "fs/freevxfs/Kconfig"
++source "fs/mini_fo/Kconfig"
+ source "fs/minix/Kconfig"
+ source "fs/omfs/Kconfig"
+ source "fs/hpfs/Kconfig"
+--- a/fs/Makefile
++++ b/fs/Makefile
+@@ -77,6 +77,7 @@ obj-$(CONFIG_SQUASHFS)		+= squashfs/
+ obj-y				+= ramfs/
+ obj-$(CONFIG_HUGETLBFS)		+= hugetlbfs/
+ obj-$(CONFIG_CODA_FS)		+= coda/
++obj-$(CONFIG_MINI_FO)		+= mini_fo/
+ obj-$(CONFIG_MINIX_FS)		+= minix/
+ obj-$(CONFIG_FAT_FS)		+= fat/
+ obj-$(CONFIG_BFS_FS)		+= bfs/
+--- /dev/null
++++ b/fs/mini_fo/aux.c
+@@ -0,0 +1,577 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++
++/* check if file exists in storage  */
++int exists_in_storage(dentry_t *dentry)
++{
++	check_mini_fo_dentry(dentry);
++	if(dtost(dentry) == MODIFIED || dtost(dentry) == CREATED || dtost(dentry) == DEL_REWRITTEN)
++		return 1;
++	return 0;
++}
++
++/* check if dentry is in an existing state */
++int is_mini_fo_existant(dentry_t *dentry)
++{
++	check_mini_fo_dentry(dentry);
++
++	if(dtost(dentry) == DELETED || dtost(dentry) == NON_EXISTANT)
++		return 0;
++	else
++		return 1;
++}
++
++/*
++ * This function will create a negative storage dentry for
++ * dentry, what is required for many create like options.
++ * It will create the storage structure if necessary.
++ */
++int get_neg_sto_dentry(dentry_t *dentry)
++{
++	int err = 0;
++	unsigned int len;
++	const unsigned char *name;
++
++	if(!dentry ||
++	   !dtopd(dentry) ||
++	   !(dtost(dentry) == UNMODIFIED ||
++	     dtost(dentry) == NON_EXISTANT ||
++	     dtost(dentry) == DELETED)) {
++		printk(KERN_CRIT "mini_fo: get_neg_sto_dentry: invalid dentry passed.\n");
++		err = -1;
++		goto out;
++	}
++	/* Have we got a neg. dentry already? */
++	if(dtohd2(dentry)) {
++		err = 0;
++		goto out;
++	}
++	if(dtost(dentry->d_parent) == UNMODIFIED) {
++		/* build sto struct */
++		err = build_sto_structure(dentry->d_parent->d_parent, dentry->d_parent);
++		if(err ||
++		   dtost(dentry->d_parent) != MODIFIED) {
++			printk(KERN_CRIT "mini_fo: get_neg_sto_dentry: ERROR building sto structure.\n");
++			err = -1;
++			goto out;
++		}
++	}
++
++	len = dentry->d_name.len;
++	name = dentry->d_name.name;
++
++	dtohd2(dentry) =
++		lookup_one_len(name, dtohd2(dentry->d_parent), len);
++
++ out:
++	return err;
++}
++
++int check_mini_fo_dentry(dentry_t *dentry)
++{
++ 	ASSERT(dentry != NULL);
++	ASSERT(dtopd(dentry) != NULL);
++	ASSERT((dtohd(dentry) != NULL) || (dtohd2(dentry) != NULL));
++
++/* 	if(dtost(dentry) == MODIFIED) { */
++/* 		ASSERT(dentry->d_inode != NULL); */
++/* 		ASSERT(dtohd(dentry) != NULL); */
++/* 		ASSERT(dtohd(dentry)->d_inode != NULL); */
++/* 		ASSERT(dtohd2(dentry) != NULL); */
++/* 		ASSERT(dtohd2(dentry)->d_inode != NULL); */
++/* 	} */
++/* 	else if(dtost(dentry) == UNMODIFIED) { */
++/* 		ASSERT(dentry->d_inode != NULL); */
++/* 		ASSERT( */
++/* 	} */
++	return 0;
++}
++
++int check_mini_fo_file(file_t *file)
++{
++	ASSERT(file != NULL);
++	ASSERT(ftopd(file) != NULL);
++	ASSERT(file->f_dentry != NULL);
++
++	/* violent checking, check depending of state and type
++	 *	if(S_ISDIR(file->f_dentry->d_inode->i_mode)) {}
++	 */
++	ASSERT((ftohf(file) != NULL) || (ftohf2(file) != NULL));
++	return 0;
++}
++
++int check_mini_fo_inode(inode_t *inode)
++{
++	ASSERT(inode != NULL);
++	ASSERT(itopd(inode) != NULL);
++	ASSERT((itohi(inode) != NULL) || (itohi2(inode) != NULL));
++	return 0;
++}
++
++/*
++ * will walk a base path as provided by get_mini_fo_bpath and return
++ * the (hopefully ;-) ) positive dentry of the renamed base dir.
++ *
++ * This does some work of path_init.
++ */
++dentry_t *bpath_walk(super_block_t *sb, char *bpath)
++{
++	int err;
++        struct vfsmount *mnt;
++	struct nameidata nd;
++
++	/* be paranoid */
++	if(!bpath || bpath[0] != '/') {
++		printk(KERN_CRIT "mini_fo: bpath_walk: Invalid string.\n");
++		return NULL;
++	}
++	if(!sb || !stopd(sb)) {
++		printk(KERN_CRIT "mini_fo: bpath_walk: Invalid sb.\n");
++		return NULL;
++	}
++
++	/* fix this: how do I reach this lock?
++	 * read_lock(&current->fs->lock); */
++	mnt = mntget(stopd(sb)->hidden_mnt);
++	/* read_unlock(&current->fs->lock); */
++
++	err = vfs_path_lookup(mnt->mnt_root, mnt, bpath+1, 0, &nd);
++
++	/* validate */
++	if (err || !nd.dentry || !nd.dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: bpath_walk: path_walk failed.\n");
++		return NULL;
++	}
++	return nd.dentry;
++}
++
++
++/* returns the full path of the basefile incl. its name */
++int get_mini_fo_bpath(dentry_t *dentry, char **bpath, int *bpath_len)
++{
++	char *buf_walker;
++	int len = 0;
++	dentry_t *sky_walker;
++
++	if(!dentry || !dtohd(dentry)) {
++		printk(KERN_CRIT "mini_fo: get_mini_fo_bpath: invalid dentry passed.\n");
++		return -1;
++	}
++	sky_walker = dtohd(dentry);
++
++	do {
++		len += sky_walker->d_name.len + 1 ; /* 1 for '/' */
++		sky_walker = sky_walker->d_parent;
++	} while(sky_walker != stopd(dentry->d_inode->i_sb)->base_dir_dentry);
++
++	/* 1 to oil the loop */
++	*bpath = (char*)  kmalloc(len + 1, GFP_KERNEL);
++	if(!*bpath) {
++		printk(KERN_CRIT "mini_fo: get_mini_fo_bpath: out of mem.\n");
++		return -1;
++	}
++	buf_walker = *bpath+len; /* put it on last char */
++	*buf_walker = '\n';
++	sky_walker = dtohd(dentry);
++
++	do {
++		buf_walker -= sky_walker->d_name.len;
++		strncpy(buf_walker,
++			sky_walker->d_name.name,
++			sky_walker->d_name.len);
++		*(--buf_walker) = '/';
++		sky_walker = sky_walker->d_parent;
++	} while(sky_walker != stopd(dentry->d_inode->i_sb)->base_dir_dentry);
++
++	/* bpath_len doesn't count newline! */
++	*bpath_len = len;
++ 	return 0;
++}
++
++int mini_fo_cp_cont(dentry_t *tgt_dentry, struct vfsmount *tgt_mnt,
++		    dentry_t *src_dentry, struct vfsmount *src_mnt)
++{
++	void *buf;
++	mm_segment_t old_fs;
++	file_t *tgt_file;
++	file_t *src_file;
++	int bytes, len, tmp, err;
++	err = 0;
++
++	if(!(tgt_dentry->d_inode && src_dentry->d_inode)) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR, neg. dentry passed.\n");
++		err = -EINVAL;
++		goto out;
++	}
++
++	dget(tgt_dentry);
++	dget(src_dentry);
++	mntget(tgt_mnt);
++	mntget(src_mnt);
++
++	/* open file write only */
++	tgt_file = dentry_open(tgt_dentry, tgt_mnt, 0x1);
++	if(!tgt_file || IS_ERR(tgt_file)) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR opening target file.\n");
++		err = PTR_ERR(tgt_file);
++		goto out_err;
++	}
++
++	/* open file read only */
++	src_file = dentry_open(src_dentry, src_mnt, 0x0);
++	if(!src_file || IS_ERR(src_file)) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR opening source file.\n");
++		err = PTR_ERR(src_file);
++
++		/* close target file */
++		fput(tgt_file);
++		goto out_err;
++	}
++
++	/* check if the filesystem(s) support read respective write */
++	if(!src_file->f_op->read || !tgt_file->f_op->write) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR, no fs read or write support.\n");
++		err = -EPERM;
++		goto out_close;
++	}
++
++	/* allocate a page for transfering the data */
++	buf = (void *) __get_free_page(GFP_KERNEL);
++	if(!buf) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR, out of kernel mem.\n");
++		goto out_err;
++	}
++
++	tgt_file->f_pos = 0;
++	src_file->f_pos = 0;
++
++	old_fs = get_fs();
++	set_fs(KERNEL_DS);
++
++	/* Doing this I assume that a read operation will return a full
++	 * buffer while there is still data to read, and a less than
++	 * full buffer when all data has been read.
++	 */
++	bytes = len = PAGE_SIZE;
++	while(bytes == len) {
++		bytes = src_file->f_op->read(src_file, buf, len,
++					     &src_file->f_pos);
++		tmp = tgt_file->f_op->write(tgt_file, buf, bytes,
++					    &tgt_file->f_pos);
++		if(tmp != bytes) {
++			printk(KERN_CRIT "mini_fo_cp_cont: ERROR writing.\n");
++			goto out_close_unset;
++		}
++	}
++
++	free_page((unsigned long) buf);
++	set_fs(old_fs);
++	fput(tgt_file);
++	fput(src_file);
++	goto out;
++
++ out_close_unset:
++	free_page((unsigned long) buf);
++	set_fs(old_fs);
++
++ out_close:
++	fput(tgt_file);
++	fput(src_file);
++
++ out_err:
++	dput(tgt_dentry);
++	dput(src_dentry);
++
++	/* mk: not sure if this need to be done */
++	mntput(tgt_mnt);
++	mntput(src_mnt);
++
++ out:
++	return err;
++}
++
++/* mk:
++ * ndl (no-duplicate list) stuff
++ * This is used in mini_fo_readdir, to save the storage directory contents
++ * and later when reading base, match them against the list in order
++ * to avoid duplicates.
++ */
++
++/* add a file specified by name and len to the ndl
++ * Return values: 0 on success, <0 on failure.
++ */
++int ndl_add_entry(struct readdir_data *rd, const char *name, int len)
++{
++	struct ndl_entry *tmp_entry;
++
++	tmp_entry = (struct ndl_entry *)
++		kmalloc(sizeof(struct ndl_entry), GFP_KERNEL);
++	if(!tmp_entry) {
++                printk(KERN_CRIT "mini_fo: ndl_add_entry: out of mem.\n");
++                return -ENOMEM;
++        }
++        tmp_entry->name = (char*) kmalloc(len, GFP_KERNEL);
++        if(!tmp_entry->name) {
++                printk(KERN_CRIT "mini_fo: ndl_add_entry: out of mem.\n");
++                return -ENOMEM;
++        }
++	strncpy(tmp_entry->name, name, len);
++        tmp_entry->len = len;
++
++        list_add(&tmp_entry->list, &rd->ndl_list);
++        rd->ndl_size++;
++        return 0;
++}
++
++/* delete all list entries and free memory */
++void ndl_put_list(struct readdir_data *rd)
++{
++	struct list_head *tmp;
++	struct ndl_entry *tmp_entry;
++
++	if(rd->ndl_size <= 0)
++		return;
++	while(!list_empty(&rd->ndl_list)) {
++		tmp = rd->ndl_list.next;
++                list_del(tmp);
++                tmp_entry = list_entry(tmp, struct ndl_entry, list);
++		kfree(tmp_entry->name);
++                kfree(tmp_entry);
++        }
++	rd->ndl_size = 0;
++}
++
++/* Check if a file specified by name and len is in the ndl
++ * Return value: 0 if not in list, 1 if file is found in ndl.
++ */
++int ndl_check_entry(struct readdir_data *rd, const char *name, int len)
++{
++	struct list_head *tmp;
++	struct ndl_entry *tmp_entry;
++
++	if(rd->ndl_size <= 0)
++		return 0;
++
++	list_for_each(tmp, &rd->ndl_list) {
++                tmp_entry = list_entry(tmp, struct ndl_entry, list);
++                if(tmp_entry->len != len)
++                        continue;
++                if(!strncmp(tmp_entry->name, name, len))
++                        return 1;
++        }
++        return 0;
++}
++
++/* mk:
++ * Recursive function to create corresponding directorys in the storage fs.
++ * The function will build the storage directorys up to dentry.
++ */
++int build_sto_structure(dentry_t *dir, dentry_t *dentry)
++{
++	int err;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++
++	if(dentry->d_parent != dir) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: invalid parameter or meta data corruption [1].\n");
++		return 1;
++	}
++
++       	if(dtost(dir) != MODIFIED) {
++		err = build_sto_structure(dir->d_parent, dentry->d_parent);
++		if(err)
++			return err;
++	}
++
++	/* ok, coming back again. */
++	check_mini_fo_dentry(dentry);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	if(!hidden_sto_dentry) {
++		/*
++		 * This is the case after creating the first
++		 * hidden_sto_dentry.
++		 * After one negative storage_dentry, all pointers to
++		 * hidden_storage dentries are set to NULL. We need to
++		 * create the negative dentry before we create the storage
++		 * file.
++		 */
++		unsigned int len;
++		const unsigned char *name;
++		len = dtohd(dentry)->d_name.len;
++		name = dtohd(dentry)->d_name.name;
++		hidden_sto_dentry = lookup_one_len(name, dtohd2(dir), len);
++		dtohd2(dentry) = hidden_sto_dentry;
++	}
++
++	/* was:	hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	/* lets be safe */
++	if(dtohd2(dir) != hidden_sto_dir_dentry) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: invalid parameter or meta data corruption [2].\n");
++		return 1;
++	}
++
++	/* check for errors in lock_parent */
++	err = PTR_ERR(hidden_sto_dir_dentry);
++	if(IS_ERR(hidden_sto_dir_dentry)) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: lock_parent failed.\n");
++		return err;
++	}
++
++	err = vfs_mkdir(hidden_sto_dir_dentry->d_inode,
++			hidden_sto_dentry,
++			dir->d_inode->i_mode);
++
++	if(err) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: failed to create storage dir [1].\n");
++		/* was: unlock_dir(dir); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&dir->d_inode->i_mutex);
++#else
++		up(&dir->d_inode->i_sem);
++#endif
++		dput(dir);
++		return err;
++	}
++
++	/* everything ok! */
++	if(!dtohd2(dentry)->d_inode) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: failed to create storage dir [2].\n");
++		/* was: unlock_dir(dir); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&dir->d_inode->i_mutex);
++#else
++		up(&dir->d_inode->i_sem);
++#endif
++		dput(dir);
++		return 1;
++	}
++
++	/* interpose the new inode and set new state */
++	itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++	dtopd(dentry)->state = MODIFIED;
++
++	/* initalize the wol list */
++	itopd(dentry->d_inode)->deleted_list_size = -1;
++	itopd(dentry->d_inode)->renamed_list_size = -1;
++	meta_build_lists(dentry);
++
++	fist_copy_attr_all(dentry->d_inode, itohi2(dentry->d_inode));
++	fist_copy_attr_timesizes(dir->d_inode,
++				 hidden_sto_dir_dentry->d_inode);
++	dir->d_inode->i_nlink++;
++	/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++	return 0;
++}
++
++
++#if 0 /* unused */
++
++/*
++ * Read "len" bytes from "filename" into "buf".
++ * "buf" is in kernel space.
++ */
++int
++mini_fo_read_file(const char *filename, void *buf, int len)
++{
++    file_t *filp;
++    mm_segment_t oldfs;
++    int bytes;
++    /* Chroot? Maybe NULL isn't right here */
++    filp = filp_open(filename, O_RDONLY, 0);
++    if (!filp || IS_ERR(filp)) {
++	printk("mini_fo_read_file err %d\n", (int) PTR_ERR(filp));
++	return -1;  /* or do something else */
++    }
++
++    if (!filp->f_op->read)
++	return -2;  /* file(system) doesn't allow reads */
++
++    /* now read len bytes from offset 0 */
++    filp->f_pos = 0;		/* start offset */
++    oldfs = get_fs();
++    set_fs(KERNEL_DS);
++    bytes = filp->f_op->read(filp, buf, len, &filp->f_pos);
++    set_fs(oldfs);
++
++    /* close the file */
++    fput(filp);
++
++    return bytes;
++}
++
++
++
++/*
++ * Write "len" bytes from "buf" to "filename"
++ * "buf" is in kernel space.
++ */
++int
++mini_fo_write_file(const char *filename, void *buf, int len)
++{
++    file_t *filp;
++    mm_segment_t oldfs;
++    int bytes;
++				/* Chroot? Maybe NULL isn't right here */
++    filp = filp_open(filename, O_RDWR|O_CREAT, 0640);
++    if (!filp || IS_ERR(filp)) {
++	printk("mini_fo_write_file err %d\n", (int) PTR_ERR(filp));
++	return -1;  /* or do something else */
++    }
++
++    if (!filp->f_op->write)
++	return -2;  /* file(system) doesn't allow writes */
++
++    /* now write len bytes from offset 0 */
++    filp->f_pos = 0;		/* start offset */
++    oldfs = get_fs();
++    set_fs(KERNEL_DS);
++    bytes = filp->f_op->write(filp, buf, len, &filp->f_pos);
++    set_fs(oldfs);
++
++    /* close the file */
++    fput(filp);
++
++    return bytes;
++}
++
++#endif /* unused */
++
+--- /dev/null
++++ b/fs/mini_fo/ChangeLog
+@@ -0,0 +1,281 @@
++2006-01-24  Markus Klotzbuecher  <mk@mary.denx.de>
++
++	* Add tons of ugly ifdefs to Ed L. Cashin's mutex patch to
++          retain backwards compatibility.
++
++2006-01-24  Ed L. Cashin <ecashin@coraid.com>
++
++	* Support for the new mutex infrastructure
++	(7892f2f48d165a34b0b8130c8a195dfd807b8cb6)
++
++2005-10-15  Markus Klotzbuecher  <mk@localhost.localdomain>
++
++	* Bugfix for a serious memory leak in mini_fo_follow_link.
++
++2005-09-21  Markus Klotzbuecher  <mk@mary>
++
++	* new release 0.6.1
++
++	* fix of a compiler warning due to changes in 2.6.13
++
++2005-09-21  Klaus Wenninger  <klaus.wenninger@siemens.com>
++
++	* file.c: readdir: fix for a bug that caused directory entries
++          to show up twice when using storage filesystems such as
++          minixfs or pramfs.
++
++2005-06-30  Eric Lammerts <eric@lammerts.org>
++
++	* fix for an oops when overwriting a binary thats beeing
++          executed.
++
++2005-06-09    <mk@mary>
++
++	* Renamed overlay to mini_fo-overlay.
++
++	* Added mini_fo-merge script to allow merging of storage and base
++	after making modifications.
++
++2005-05-22  root  <mk@mary>
++
++	* Added overlay script that allows to easily mount mini_fo ontop
++	of a given base directory
++
++2005-05-10    <mk@mary>
++
++	* inode.c: xattr functions return -EOPNOSUPP instead of
++          -ENOSUPP, what confuses "ls -l"
++
++	* Changed license from LGPL to GPL.
++
++2005-05-08  root  <mk@mary>
++
++	* Makefile: clean it up and added make install and make
++          uninstall.
++
++2005-05-06    <mk@mary>
++
++	* merged devel branch back to main. [v0-6-0-pre3]
++
++	* removed unused files print.c and fist_ioctl. [devel-0-0-18]
++
++	* ioctl: removed fist_ioctl stuff, that is not needed for
++          now.
++
++2005-05-03    <mk@mary>
++
++	* file.c: simplified mini_fo_open and mini_fo_setattr using
++          new state changing functions. [devel-0-0-17]
++
++	* inode.c: Fixed getattr state bug (see below) in 2.4 function
++          mini_fo_inode revalidate.
++
++	* inode.c: found an other bug in mini_fo_getattr. States are not
++	  reliable in this function, as a file can be opened, unlinked and
++	  the getattr function called. This results in a deleted dentry
++	  with an inode. Fix is to ignore states and simply use the inode
++	  available.
++
++2005-04-29    <mk@mary>
++
++	* file.c: Bugfix and cleanup in fasync and fsync. [devel-0-0-16]
++
++	* file.c: do not use mini_fo_lock so the generic version is
++          used (I guess).
++
++	* inode.c: getattr, never call getattr on lower files, as this
++          will cause the inum to change.
++
++	* inode.c: rename_reg_file renamed to rename_nondir, as it
++          doesn't matter as long it't not a dir. Removed all
++          rename_dev_file etc.
++
++	* tagged as devel-0-0-15
++
++	* inode.c: added support for chosing support for extended
++          attrs at compile time by XATTR define in mini_fo.h .
++
++	* inode.c: fixed mini_fo_getattr to use mini_fo inode and not
++          lower again, what avoids inode number changes that confused
++          rm again. This is the proper solution.
++
++2005-04-24    <mk@mary>
++
++	* all files: updated Copyright notive to 2005. [devel-0-0-14]
++
++	* inode.c: fixed mini_fo_getattr to not change the inode
++          number, even if lower files change.
++
++	* super.c: fixed a bug that caused deleted base file to show
++          up suddenly after some time, or after creating a special
++          file. The problem was that after some time or after special
++          file creating sync_sb_inodes is called by the vfs, that
++          called our mini_fo_put_inode. There was (wrongly) called
++          __meta_put_lists, that nuked the lists, although the inode
++          was going to continue its life. Moving __meta_put_lists to
++          mini_fo_clear_inode, where an inode is really destroyed,
++          solved the problem.
++
++
++2005-04-23    <mk@mary>
++
++	* state.c, aux.c: more cleaning up and
++          simplifications. [devel-0-0-13]
++
++	* inode.c: implemented mini_fo_getattr, that was required for
++          2.6 because inode_revalidate has been remove there, and the
++	  old "du" bug returned.
++
++
++2005-04-20    <mk@mary>
++
++	* aux.c: get_neg_sto_dentry(): allow to be called for dentries
++          in state UNMODIFIED, NON_EXISTANT _and_ DELETED.
++
++2005-04-19    <mk@mary>
++
++	* Fixed a bug under 2.6 that caused files deleted via mini_fo
++          not to be deleted properly and therefore the fs filled up
++          untill no memory was left. [devel-0-0-12]
++
++	* Added basic hard link support. This means that creating
++          hardlinks will work, but existing ones will be treated as
++          individual files. [devel-0-0-11]
++
++2005-04-17    <mk@mary>
++
++	* Bugfixes
++
++2005-04-13  root  <mk@mary>
++
++	* Added file state.c for the state transition
++          functions. Doesn't work very well yet, though...
++
++2005-04-12    <mk@mary>
++
++	* Porting to 2.6 started, which is easier than expected, also
++          due to Olivier previous work.
++
++2005-04-08    <mk@mary>
++
++	* Fixed the bug that caused du to return invalid sizes of
++          directory trees. The problem was that
++          mini_fo_inode_revalidate didn't always copy the attributes
++          from the base inode properly.
++
++2005-04-01  Markus Klotzbuecher  <mk@chasey>
++
++	* Merged devel branch back to main trunk and updated the
++          RELEASE notes. This will be 0-6-0-pre1.
++
++2005-03-31  Markus Klotzbuecher  <mk@chasey>
++
++	* Fixed some bugs in rename_reg_file, that only showed up in
++          the kernel compile test. Kernel compiles cleanly ontop of
++          mini_fo, now also make mrproper etc. work. Seems pretty stable.
++
++2005-03-28  Markus Klotzbuecher  <mk@chasey>
++
++	* Many, many directory renaming bugfixes and a lot of other
++          cleanup. Dir renaming seems to work relatively stable.
++
++2005-03-22  Markus Klotzbuecher  <mk@chasey>
++
++	* Finished implementing lightweight directory renaming. Some
++          basic testing indicates it works fine.
++	  Next is to implement testcases for the testsuite and confirm
++          everything is really working ok.
++
++2005-03-18  Markus Klotzbuecher  <mk@chasey>
++
++	* Finished implementing meta.c stuff required for directory
++          renaming.
++
++2005-03-17  Markus Klotzbuecher  <mk@chasey>
++
++	* Fixed all compile warnings + an extremly old bug that
++          somehow crept in while reworking the wol stuff to the META
++          system. Turning on -Werror again... :-)
++
++	* Fixed some bugs in the new rename_reg_file function.
++
++	* Rewrote mini_fo rename and split it into several
++          subfunctions, that handle the different types
++          seperately. Rewrote the regular file function aswell, as it
++          was implemented somewhat inefficient.
++
++2005-03-16  Markus Klotzbuecher  <mk@chasey>
++
++	* Implemented new META subsystem, removed old WOL stuff in favor
++	  if it.
++
++	* After some basic testing everything seems ok...
++
++2005-03-11  Markus Klotzbuecher  <mk@chasey>
++
++	* Renaming a non regular file caused trouble because I always
++	  tried to copy the contents. Now I only do this for regular
++	  files. mini_fo_rename still isn't implemented properly, renaming
++	  of device files, symlinks etc. results in a empty regular file
++	  instead of the proper type.
++
++	* Directory renaming suddenly works! What a surprise! I guess
++          this is because renaming is implemented as making a copy and
++          removing the original. Still this might not work
++          everywhere...
++
++2005-03-09  Markus Klotzbuecher  <mk@chasey>
++
++	* Bugfix, when a mini_fo directory that exists in storage
++  	  (state: MODIFIED, CREATED and DEL_REWRITTEN) is deleted, a
++  	  possibly existing WOL file contained in it needs to be
++  	  deleted too.
++
++	* Starting cleanup: defined state names in order to get rid of
++          the state numbers.
++
++2005-03-08  Markus Klotzbuecher  <mk@chasey>
++
++	* Makefile fix, fist_ioctl was built against wrong sources if ARCH=um
++
++	* Fixed a bug in dentry.c, mini_fo_d_hash. In state 4 =
++          DEL_REWRITTEN the hash was calculated from the base dentry,
++          which was wrong and and caused assertions in
++          __mini_fo_hidden_dentry to fail.
++
++2005-02-21    <mk@mary>
++
++	* Implemented directory deleting (inode.c)
++
++	* main.c: made mini_fo_parse_options a little more robust.
++
++2004-12-22    <mk@mary>
++
++	* Makefile cleanup and uml stuff, removed unneccessary files
++
++	* Created a new and hopefully more informative README
++
++	* CHANGELOG: created a new CHANGELOG and added old entries reversely
++
++
++2004-10-24 Gleb Natapov <gleb@nbase.co.il>
++
++	* Fix: owner and group where not correctly copied from base to
++          storage.
++
++
++2004-10-05 Gleb Natapov <gleb@nbase.co.il>
++
++	* Implementation of fsync, fasync and lock mini_fo functions.
++
++
++2004-09-29 Bob Lee <bob@pantasys.com>
++
++	* Fix of a serious pointer bug
++
++
++2004-09-28 Gleb Natapov <gleb@nbase.co.il>
++
++	* Implementation of mini_fo_mknod and mini_fo_rename, support
++          for device files.
++
+--- /dev/null
++++ b/fs/mini_fo/dentry.c
+@@ -0,0 +1,244 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++
++/*
++ * THIS IS A BOOLEAN FUNCTION: returns 1 if valid, 0 otherwise.
++ */
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_d_revalidate(dentry_t *dentry, struct nameidata *nd)
++#else
++mini_fo_d_revalidate(dentry_t *dentry, int flags)
++#endif
++{
++	int err1 = 1; /* valid = 1, invalid = 0 */
++	int err2 = 1;
++	dentry_t *hidden_dentry;
++	dentry_t *hidden_sto_dentry;
++
++
++	check_mini_fo_dentry(dentry);
++
++	hidden_dentry  = dtohd(dentry);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	if(hidden_dentry &&
++	   hidden_dentry->d_op &&
++	   hidden_dentry->d_op->d_revalidate) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		err1 = hidden_dentry->d_op->d_revalidate(hidden_dentry, nd);
++#else
++		err1 = hidden_dentry->d_op->d_revalidate(hidden_dentry, flags);
++#endif
++	}
++	if(hidden_sto_dentry &&
++	   hidden_sto_dentry->d_op &&
++	   hidden_sto_dentry->d_op->d_revalidate) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		err2 = hidden_sto_dentry->d_op->d_revalidate(hidden_sto_dentry,
++							     nd);
++#else
++		err2 = hidden_sto_dentry->d_op->d_revalidate(hidden_sto_dentry,
++							     flags);
++#endif
++	}
++
++	/* mk: if one of the lower level dentries are valid,
++	 * the mini_fo dentry is too.
++	 */
++	return (err1 || err2);
++}
++
++
++STATIC int
++mini_fo_d_hash(dentry_t *dentry, qstr_t *name)
++{
++	int err = 0;
++	dentry_t *hidden_dentry;
++	dentry_t *hidden_sto_dentry;
++
++	/* hidden_dentry = mini_fo_hidden_dentry(dentry);
++	 * hidden_sto_dentry = mini_fo_hidden_sto_dentry(dentry); */
++
++	/* state 1, 3, 4, 5: build the hash for the storage dentry */
++	if((dtopd(dentry)->state == MODIFIED) ||
++	   (dtopd(dentry)->state == CREATED) ||
++	   (dtopd(dentry)->state == DEL_REWRITTEN) ||
++	   (dtopd(dentry)->state == DELETED)) {
++		hidden_sto_dentry = dtohd2(dentry);
++		if(hidden_sto_dentry &&
++		   hidden_sto_dentry->d_op &&
++		   hidden_sto_dentry->d_op->d_hash) {
++			err = hidden_sto_dentry->d_op->d_hash(hidden_sto_dentry, name);
++		}
++		goto out;
++	}
++	/* state 2: build the hash for the base dentry */
++	if(dtopd(dentry)->state == UNMODIFIED) {
++		hidden_dentry = dtohd(dentry);
++		if(hidden_dentry &&
++		   hidden_dentry->d_op &&
++		   hidden_dentry->d_op->d_hash) {
++			err = hidden_dentry->d_op->d_hash(hidden_dentry, name);
++		}
++		goto out;
++	}
++	/* state 6: build hash for the dentry that exists */
++	if(dtopd(dentry)->state == NON_EXISTANT) {
++		hidden_sto_dentry = dtohd2(dentry);
++		if(hidden_sto_dentry &&
++		   hidden_sto_dentry->d_op &&
++		   hidden_sto_dentry->d_op->d_hash) {
++			err = hidden_sto_dentry->d_op->d_hash(hidden_sto_dentry, name);
++			goto out;
++		}
++		hidden_dentry = dtohd(dentry);
++		if(hidden_dentry &&
++		   hidden_dentry->d_op &&
++		   hidden_dentry->d_op->d_hash) {
++			err = hidden_dentry->d_op->d_hash(hidden_dentry, name);
++			goto out;
++		}
++	}
++
++	printk(KERN_CRIT "mini_fo: d_hash: invalid state detected.\n");
++
++ out:
++	return err;
++}
++
++
++STATIC int
++mini_fo_d_compare(dentry_t *dentry, qstr_t *a, qstr_t *b)
++{
++	int err;
++	dentry_t *hidden_dentry=NULL;
++
++	/* hidden_dentry = mini_fo_hidden_dentry(dentry); */
++	if(dtohd2(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else if(dtohd(dentry))
++		hidden_dentry = dtohd(dentry);
++
++	if (hidden_dentry && hidden_dentry->d_op && hidden_dentry->d_op->d_compare) {
++		err = hidden_dentry->d_op->d_compare(hidden_dentry, a, b);
++	} else {
++		err = ((a->len != b->len) || memcmp(a->name, b->name, b->len));
++	}
++
++	return err;
++}
++
++
++int
++mini_fo_d_delete(dentry_t *dentry)
++{
++	dentry_t *hidden_dentry;
++	dentry_t *hidden_sto_dentry;
++	int err = 0;
++
++	/* this could be a negative dentry, so check first */
++	if (!dtopd(dentry)) {
++		printk(KERN_CRIT "mini_fo_d_delete: negative dentry passed.\n");
++		goto out;
++	}
++	hidden_dentry = dtohd(dentry);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	if(hidden_dentry) {
++		if(hidden_dentry->d_op &&
++		   hidden_dentry->d_op->d_delete) {
++			err = hidden_dentry->d_op->d_delete(hidden_dentry);
++		}
++	}
++	if(hidden_sto_dentry) {
++		if(hidden_sto_dentry->d_op &&
++		   hidden_sto_dentry->d_op->d_delete) {
++			err = hidden_sto_dentry->d_op->d_delete(hidden_sto_dentry);
++		}
++	}
++
++ out:
++	return err;
++}
++
++
++void
++mini_fo_d_release(dentry_t *dentry)
++{
++	dentry_t *hidden_dentry;
++	dentry_t *hidden_sto_dentry;
++
++
++	/* this could be a negative dentry, so check first */
++	if (!dtopd(dentry)) {
++		printk(KERN_CRIT "mini_fo_d_release: no private data.\n");
++		goto out;
++	}
++	hidden_dentry = dtohd(dentry);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	if(hidden_dentry) {
++		/* decrement hidden dentry's counter and free its inode */
++		dput(hidden_dentry);
++	}
++	if(hidden_sto_dentry) {
++                /* decrement hidden dentry's counter and free its inode */
++		dput(hidden_sto_dentry);
++	}
++
++	/* free private data (mini_fo_dentry_info) here */
++	kfree(dtopd(dentry));
++	__dtopd(dentry) = NULL;	/* just to be safe */
++ out:
++	return;
++}
++
++
++/*
++ * we don't really need mini_fo_d_iput, because dentry_iput will call iput() if
++ * mini_fo_d_iput is not defined. We left this implemented for ease of
++ * tracing/debugging.
++ */
++void
++mini_fo_d_iput(dentry_t *dentry, inode_t *inode)
++{
++	iput(inode);
++}
++
++
++struct dentry_operations mini_fo_dops = {
++	d_revalidate:	mini_fo_d_revalidate,
++	d_hash:		mini_fo_d_hash,
++	d_compare:		mini_fo_d_compare,
++	d_release:		mini_fo_d_release,
++	d_delete:		mini_fo_d_delete,
++	d_iput:		mini_fo_d_iput,
++};
+--- /dev/null
++++ b/fs/mini_fo/file.c
+@@ -0,0 +1,713 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++#define ROUND_UP(x) (((x)+sizeof(long)-1) & ~(sizeof(long)-1))
++
++/*******************
++ * File Operations *
++ *******************/
++
++STATIC loff_t
++mini_fo_llseek(file_t *file, loff_t offset, int origin)
++{
++	loff_t err;
++	file_t *hidden_file = NULL;
++
++	if(S_ISDIR(file->f_dentry->d_inode->i_mode)) {
++		/* Check if trying to llseek from a directory */
++		err = -EISDIR;
++		goto out;
++	}
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			hidden_file = ftohf(file);
++		}
++	}
++
++	/* always set hidden position to this one */
++	hidden_file->f_pos = file->f_pos;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	memcpy(&(hidden_file->f_ra),
++	       &(file->f_ra),
++	       sizeof(struct file_ra_state));
++#else
++	if (file->f_reada) { /* update readahead information if needed */
++		hidden_file->f_reada = file->f_reada;
++		hidden_file->f_ramax = file->f_ramax;
++		hidden_file->f_raend = file->f_raend;
++		hidden_file->f_ralen = file->f_ralen;
++		hidden_file->f_rawin = file->f_rawin;
++	}
++#endif
++	if (hidden_file->f_op && hidden_file->f_op->llseek)
++		err = hidden_file->f_op->llseek(hidden_file, offset, origin);
++	else
++		err = generic_file_llseek(hidden_file, offset, origin);
++
++	if (err < 0)
++		goto out;
++
++	if (err != file->f_pos) {
++		file->f_pos = err;
++		// ION maybe this?
++		// 	file->f_pos = hidden_file->f_pos;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++		file->f_reada = 0;
++#endif
++		file->f_version++;
++	}
++
++ out:
++	return err;
++}
++
++
++/* mk: fanout capable */
++STATIC ssize_t
++mini_fo_read(file_t *file, char *buf, size_t count, loff_t *ppos)
++{
++	int err = -EINVAL;
++	file_t *hidden_file = NULL;
++	loff_t pos = *ppos;
++
++	if(S_ISDIR(file->f_dentry->d_inode->i_mode)) {
++		/* Check if trying to read from a directory */
++		/* printk(KERN_CRIT "mini_fo_read: ERROR: trying to read data from a directory.\n"); */
++		err = -EISDIR;
++		goto out;
++	}
++
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			hidden_file = ftohf(file);
++		}
++	}
++
++	if (!hidden_file->f_op || !hidden_file->f_op->read)
++		goto out;
++
++	err = hidden_file->f_op->read(hidden_file, buf, count, &pos);
++	*ppos = pos;
++
++	if (err >= 0) {
++		/* atime should also be updated for reads of size zero or more */
++		fist_copy_attr_atime(file->f_dentry->d_inode,
++				     hidden_file->f_dentry->d_inode);
++	}
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	/*
++	 * MAJOR HACK
++	 * because pread() does not have any way to tell us that it is
++	 * our caller, then we don't know for sure if we have to update
++	 * the file positions.  This hack relies on read() having passed us
++	 * the "real" pointer of its struct file's f_pos field.
++	 */
++	if (ppos == &file->f_pos)
++		hidden_file->f_pos = *ppos = pos;
++	if (hidden_file->f_reada) { /* update readahead information if needed */
++		file->f_reada = hidden_file->f_reada;
++		file->f_ramax = hidden_file->f_ramax;
++		file->f_raend = hidden_file->f_raend;
++		file->f_ralen = hidden_file->f_ralen;
++		file->f_rawin = hidden_file->f_rawin;
++	}
++#else
++	memcpy(&(file->f_ra),&(hidden_file->f_ra),sizeof(struct file_ra_state));
++#endif
++
++ out:
++	return err;
++}
++
++
++/* this mini_fo_write() does not modify data pages! */
++STATIC ssize_t
++mini_fo_write(file_t *file, const char *buf, size_t count, loff_t *ppos)
++{
++	int err = -EINVAL;
++	file_t *hidden_file = NULL;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	loff_t pos = *ppos;
++
++	/* mk: fan out: */
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			/* This is bad! We have no storage file to write to. This
++			 * should never happen because if a file is opened for
++			 * writing, a copy should have been made earlier.
++			 */
++			printk(KERN_CRIT "mini_fo: write : ERROR, no storage file to write.\n");
++			err = -EINVAL;
++			goto out;
++		}
++	}
++
++	inode = file->f_dentry->d_inode;
++	hidden_inode = itohi2(inode);
++	if(!hidden_inode) {
++		printk(KERN_CRIT "mini_fo: write: no sto inode found, not good.\n");
++		goto out;
++	}
++
++	if (!hidden_file->f_op || !hidden_file->f_op->write)
++		goto out;
++
++	/* adjust for append -- seek to the end of the file */
++	if (file->f_flags & O_APPEND)
++		pos = inode->i_size;
++
++	err = hidden_file->f_op->write(hidden_file, buf, count, &pos);
++
++	/*
++	 * copy ctime and mtime from lower layer attributes
++	 * atime is unchanged for both layers
++	 */
++	if (err >= 0)
++		fist_copy_attr_times(inode, hidden_inode);
++
++	*ppos = pos;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	/*
++	 * XXX: MAJOR HACK
++	 *
++	 * because pwrite() does not have any way to tell us that it is
++	 * our caller, then we don't know for sure if we have to update
++	 * the file positions.  This hack relies on write() having passed us
++	 * the "real" pointer of its struct file's f_pos field.
++	 */
++	if (ppos == &file->f_pos)
++		hidden_file->f_pos = *ppos = pos;
++#endif
++	/* update this inode's size */
++	if (pos > inode->i_size)
++		inode->i_size = pos;
++
++ out:
++	return err;
++}
++
++/* Global variable to hold a file_t pointer.
++ * This serves to allow mini_fo_filldir function to know which file is
++ * beeing read, which is required for two reasons:
++ *
++ *   - be able to call wol functions in order to avoid listing deleted
++ *     base files.
++ *   - if we're reading a directory which is in state 1, we need to
++ *     maintain a list (in mini_fo_filldir) of which files allready
++ *     have been copied to userspace,to detect files existing in base
++ *     and storage and not list them twice.
++ */
++filldir_t mini_fo_filldir_orig;
++file_t *mini_fo_filldir_file;
++
++/* mainly copied from fs/readdir.c */
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++mini_fo_filldir(void * __buf, const char * name, int namlen, loff_t offset,
++		  u64 ino, unsigned int d_type)
++#else
++mini_fo_filldir(void * __buf, const char * name, int namlen, loff_t offset,
++		  ino_t ino, unsigned int d_type)
++#endif
++{
++	struct getdents_callback * buf = (struct getdents_callback *) __buf;
++	file_t* file = mini_fo_filldir_file;
++
++	/* In theses states we filter meta files in storage (WOL) */
++	if(file && (dtopd(file->f_dentry)->state == MODIFIED ||
++		    dtopd(file->f_dentry)->state == CREATED ||
++		    dtopd(file->f_dentry)->state == DEL_REWRITTEN)) {
++
++		int tmp = strlen(META_FILENAME);
++		if(tmp  == namlen) {
++			if(!strncmp(name, META_FILENAME, namlen))
++				return 0;
++		}
++	}
++
++	/* check if we are merging the contents of storage and base */
++	if(file && dtopd(file->f_dentry)->state == MODIFIED) {
++		/* check if we are still reading storage contents, if
++		 * yes, we just save the name of the file for duplicate
++		 * checking later. */
++
++		if(!ftopd(file)->rd.sto_done) {
++			/* put file into ndl list */
++			if(ndl_add_entry(&ftopd(file)->rd, name, namlen))
++				printk(KERN_CRIT "mini_fo_filldir: Error adding to ndl.\n");
++		} else {
++			/* check if file has been deleted */
++			if(meta_check_d_entry(file->f_dentry, name, namlen))
++				return 0;
++
++			/* do duplicate checking */
++			if(ndl_check_entry(&ftopd(file)->rd, name, namlen))
++				return 0;
++		}
++	}
++
++	return mini_fo_filldir_orig(buf, name, namlen, offset, ino, d_type);
++}
++
++
++STATIC int
++mini_fo_readdir(file_t *file, void *dirent, filldir_t filldir)
++{
++	int err = 0;/* mk: ??? -ENOTDIR; */
++	file_t *hidden_file = NULL;
++	file_t *hidden_sto_file = NULL;
++	inode_t *inode;
++	struct getdents_callback *buf;
++	int oldcount;
++
++#if defined(FIST_FILTER_NAME) || defined(FIST_FILTER_SCA)
++	struct mini_fo_getdents_callback buf;
++#endif /* FIST_FILTER_NAME || FIST_FILTER_SCA */
++
++	buf = (struct getdents_callback *) dirent;
++	oldcount = buf->count;
++	inode = file->f_dentry->d_inode;
++	mini_fo_filldir_file = file;
++	mini_fo_filldir_orig = filldir;
++
++	ftopd(file)->rd.sto_done = 0;
++	do {
++		if (ftopd(file) != NULL) {
++			if(ftohf2(file)) {
++				hidden_sto_file = ftohf2(file);
++				err = vfs_readdir(hidden_sto_file, mini_fo_filldir, dirent);
++				file->f_pos = hidden_sto_file->f_pos;
++				if (err > 0)
++					fist_copy_attr_atime(inode, hidden_sto_file->f_dentry->d_inode);
++				/* not finshed yet, we'll be called again */
++				if (buf->count != oldcount)
++					break;
++			}
++
++			ftopd(file)->rd.sto_done = 1;
++
++			if(ftohf(file)) {
++				hidden_file = ftohf(file);
++				err = vfs_readdir(hidden_file, mini_fo_filldir, dirent);
++				file->f_pos = hidden_file->f_pos;
++				if (err > 0)
++					fist_copy_attr_atime(inode, hidden_file->f_dentry->d_inode);
++			}
++
++		}
++	} while (0);
++
++	/* mk:
++	 * we need to check if all the directory data has been copied to userspace,
++	 * or if we will be called again by userspace to complete the operation.
++	 */
++	if(buf->count == oldcount) {
++		ndl_put_list(&ftopd(file)->rd);
++	}
++
++	/* unset this, safe */
++	mini_fo_filldir_file = NULL;
++	return err;
++}
++
++
++STATIC unsigned int
++mini_fo_poll(file_t *file, poll_table *wait)
++{
++	unsigned int mask = DEFAULT_POLLMASK;
++	file_t *hidden_file = NULL;
++
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			hidden_file = ftohf(file);
++		}
++	}
++
++	if (!hidden_file->f_op || !hidden_file->f_op->poll)
++		goto out;
++
++	mask = hidden_file->f_op->poll(hidden_file, wait);
++
++ out:
++	return mask;
++}
++
++/* FIST-LITE special version of mmap */
++STATIC int
++mini_fo_mmap(file_t *file, vm_area_t *vma)
++{
++	int err = 0;
++	file_t *hidden_file = NULL;
++
++	/* fanout capability */
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			hidden_file = ftohf(file);
++		}
++	}
++
++	ASSERT(hidden_file != NULL);
++	ASSERT(hidden_file->f_op != NULL);
++	ASSERT(hidden_file->f_op->mmap != NULL);
++
++	vma->vm_file = hidden_file;
++	err = hidden_file->f_op->mmap(hidden_file, vma);
++	get_file(hidden_file); /* make sure it doesn't get freed on us */
++	fput(file);	       /* no need to keep extra ref on ours */
++
++	return err;
++}
++
++
++
++STATIC int
++mini_fo_open(inode_t *inode, file_t *file)
++{
++	int err = 0;
++ 	int hidden_flags;
++	file_t *hidden_file = NULL;
++	dentry_t *hidden_dentry = NULL;
++
++	/* fanout stuff */
++	file_t *hidden_sto_file = NULL;
++	dentry_t *hidden_sto_dentry = NULL;
++
++	__ftopd(file) =
++		kmalloc(sizeof(struct mini_fo_file_info), GFP_KERNEL);
++	if (!ftopd(file)) {
++		err = -ENOMEM;
++		goto out;
++	}
++
++	/* init the readdir_helper structure */
++	INIT_LIST_HEAD(&ftopd(file)->rd.ndl_list);
++	ftopd(file)->rd.ndl_size = 0;
++
++	/* In certain paths this could stay uninitalized and cause trouble */
++	ftohf(file) = NULL;
++	ftohf2(file) = NULL;
++	hidden_flags = file->f_flags;
++
++	/* create storage files? */
++	if(dtost(file->f_dentry) == UNMODIFIED) {
++		if(!IS_WRITE_FLAG(file->f_flags)) {
++			hidden_dentry = dtohd(file->f_dentry);
++			dget(hidden_dentry);
++			/* dentry_open will decrement mnt refcnt if err.
++			 * otherwise fput() will do an mntput() for us upon file close. */
++			mntget(stopd(inode->i_sb)->hidden_mnt);
++			hidden_file = dentry_open(hidden_dentry,
++						  stopd(inode->i_sb)->hidden_mnt,
++						  hidden_flags);
++			if (IS_ERR(hidden_file)) {
++				err = PTR_ERR(hidden_file);
++				dput(hidden_dentry);
++				goto out;
++			}
++			ftohf(file) = hidden_file;	/* link two files */
++			goto out;
++		}
++		else {
++			if(S_ISDIR(file->f_dentry->d_inode->i_mode)) {
++				err = dir_unmod_to_mod(file->f_dentry);
++			} else
++				err = nondir_unmod_to_mod(file->f_dentry, 1);
++
++			if (err) {
++				printk("mini_fo_open: ERROR creating storage file.\n");
++				goto out;
++			}
++		}
++	}
++	hidden_sto_dentry = dtohd2(file->f_dentry);
++	dget(hidden_sto_dentry);
++
++	if(dtopd(file->f_dentry)->state == MODIFIED) {
++		/* Directorys are special, interpose on both lower level files */
++		if(S_ISDIR(itohi(inode)->i_mode)) {
++			/* check for invalid file types of lower level files */
++			if(!(S_ISDIR(itohi(inode)->i_mode) && S_ISDIR(itohi2(inode)->i_mode))) {
++				printk(KERN_CRIT "mini_fo_open: meta data corruption detected.\n");
++				dput(hidden_sto_dentry);
++				err = -EINVAL;
++				goto out;
++			}
++
++			/* lower level directorys are ok, open the base file */
++			hidden_dentry = dtohd(file->f_dentry);
++			dget(hidden_dentry);
++
++			mntget(stopd(inode->i_sb)->hidden_mnt);
++			hidden_file = dentry_open(hidden_dentry,
++						  stopd(inode->i_sb)->hidden_mnt,
++						  hidden_flags);
++			if (IS_ERR(hidden_file)) {
++				err = PTR_ERR(hidden_file);
++				dput(hidden_dentry);
++				dput(hidden_sto_dentry);
++				goto out;
++			}
++			ftohf(file) = hidden_file; /* link the two files */
++		}
++	}
++
++	if(!exists_in_storage(file->f_dentry)) {
++		printk(KERN_CRIT "mini_fo_open: invalid file state detected.\n");
++		err = -EINVAL;
++		dput(hidden_sto_dentry);
++
++		/* If the base file has been opened, we need to close it here */
++		if(ftohf(file)) {
++			if (hidden_file->f_op && hidden_file->f_op->flush)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++				hidden_file->f_op->flush(hidden_file, NULL);
++#else
++				hidden_file->f_op->flush(hidden_file);
++#endif
++			dput(hidden_dentry);
++		}
++		goto out;
++	}
++
++	/* ok, now we can safely open the storage file */
++	mntget(stopd(inode->i_sb)->hidden_mnt2);
++	hidden_sto_file = dentry_open(hidden_sto_dentry,
++				      stopd(inode->i_sb)->hidden_mnt2,
++				      hidden_flags);
++
++	/* dentry_open dputs the dentry if it fails */
++	if (IS_ERR(hidden_sto_file)) {
++		err = PTR_ERR(hidden_sto_file);
++		/* close base file if open */
++		if(ftohf(file)) {
++			if (hidden_file->f_op && hidden_file->f_op->flush)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++				hidden_file->f_op->flush(hidden_file, NULL);
++#else
++				hidden_file->f_op->flush(hidden_file);
++#endif
++			dput(hidden_dentry);
++		}
++		goto out;
++	}
++	ftohf2(file) = hidden_sto_file; /* link storage file */
++
++ out:
++	if (err < 0 && ftopd(file)) {
++		kfree(ftopd(file));
++	}
++	return err;
++}
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++mini_fo_flush(file_t *file, fl_owner_t id)
++#else
++mini_fo_flush(file_t *file)
++#endif
++{
++	int err1 = 0;		/* assume ok (see open.c:close_fp) */
++	int err2 = 0;
++	file_t *hidden_file = NULL;
++
++	check_mini_fo_file(file);
++
++	/* mk: we don't do any state checking here, as its not worth the time.
++	 * Just flush the lower level files if they exist.
++	 */
++	if(ftopd(file) != NULL) {
++		if(ftohf(file) != NULL) {
++			hidden_file = ftohf(file);
++			if (hidden_file->f_op && hidden_file->f_op->flush)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++				err1 = hidden_file->f_op->flush(hidden_file, id);
++#else
++				err1 = hidden_file->f_op->flush(hidden_file);
++#endif
++		}
++		if(ftohf2(file) != NULL) {
++			hidden_file = ftohf2(file);
++			if (hidden_file->f_op && hidden_file->f_op->flush)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++				err2 = hidden_file->f_op->flush(hidden_file, id);
++#else
++				err2 = hidden_file->f_op->flush(hidden_file);
++#endif
++		}
++	}
++	return (err1 | err2);
++}
++
++
++STATIC int
++mini_fo_release(inode_t *inode, file_t *file)
++{
++	int err = 0;
++	file_t *hidden_file = NULL;
++
++	if (ftopd(file) != NULL) {
++		if(ftohf(file)) {
++			hidden_file = ftohf(file);
++			fput(hidden_file);
++		}
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++			fput(hidden_file);
++		}
++		kfree(ftopd(file));
++	}
++	return err;
++}
++
++STATIC int
++mini_fo_fsync(file_t *file, dentry_t *dentry, int datasync)
++{
++	int err1 = 0;
++	int err2 = 0;
++	file_t *hidden_file = NULL;
++	dentry_t *hidden_dentry;
++
++	check_mini_fo_file(file);
++
++	if ((hidden_file = ftohf(file)) != NULL) {
++		hidden_dentry = dtohd(dentry);
++		if (hidden_file->f_op && hidden_file->f_op->fsync) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++			mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++			down(&hidden_dentry->d_inode->i_sem);
++#endif
++			err1 = hidden_file->f_op->fsync(hidden_file, hidden_dentry, datasync);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++			mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++			up(&hidden_dentry->d_inode->i_sem);
++#endif
++		}
++	}
++
++	if ((hidden_file = ftohf2(file)) != NULL) {
++		hidden_dentry = dtohd2(dentry);
++		if (hidden_file->f_op && hidden_file->f_op->fsync) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++			mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++			down(&hidden_dentry->d_inode->i_sem);
++#endif
++			err2 = hidden_file->f_op->fsync(hidden_file, hidden_dentry, datasync);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++			mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++			up(&hidden_dentry->d_inode->i_sem);
++#endif
++		}
++	}
++	else
++		goto err;
++
++err:
++	return (err1 || err2);
++}
++
++
++STATIC int
++mini_fo_fasync(int fd, file_t *file, int flag)
++{
++	int err1 = 0;
++	int err2 = 0;
++
++	file_t *hidden_file = NULL;
++
++	check_mini_fo_file(file);
++
++	if((hidden_file = ftohf(file)) != NULL) {
++		err1 = hidden_file->f_op->fasync(fd, hidden_file, flag);
++	}
++	if((hidden_file = ftohf2(file)) != NULL) {
++		err2 = hidden_file->f_op->fasync(fd, hidden_file, flag);
++	}
++
++	return (err1 || err2);
++}
++
++
++
++struct file_operations mini_fo_dir_fops =
++	{
++		read:	generic_read_dir,
++		write:	mini_fo_write,
++		readdir: mini_fo_readdir,
++		poll:	mini_fo_poll,
++		/* ioctl:	mini_fo_ioctl, */
++		mmap:	mini_fo_mmap,
++		open:	mini_fo_open,
++		flush:	mini_fo_flush,
++		release: mini_fo_release,
++		fsync:	mini_fo_fsync,
++		fasync:	mini_fo_fasync,
++		/* not needed lock:	mini_fo_lock, */
++		/* not needed: readv */
++		/* not needed: writev */
++		/* not implemented: sendpage */
++		/* not implemented: get_unmapped_area */
++	};
++
++struct file_operations mini_fo_main_fops =
++	{
++		llseek:	mini_fo_llseek,
++		read:	mini_fo_read,
++		write:	mini_fo_write,
++		readdir: mini_fo_readdir,
++		poll:	mini_fo_poll,
++		/* ioctl:	mini_fo_ioctl, */
++		mmap:	mini_fo_mmap,
++		open:	mini_fo_open,
++		flush:	mini_fo_flush,
++		release: mini_fo_release,
++		fsync:	mini_fo_fsync,
++		fasync:	mini_fo_fasync,
++		/* not needed: lock:	mini_fo_lock, */
++		/* not needed: readv */
++		/* not needed: writev */
++		/* not implemented: sendpage */
++		/* not implemented: get_unmapped_area */
++	};
+--- /dev/null
++++ b/fs/mini_fo/fist.h
+@@ -0,0 +1,252 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++
++/*
++ *  $Id$
++ */
++
++#ifndef __FIST_H_
++#define __FIST_H_
++
++/*
++ * KERNEL ONLY CODE:
++ */
++#ifdef __KERNEL__
++#include <linux/version.h>
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19)
++#include <linux/autoconf.h>
++#else
++#include <linux/config.h>
++#endif
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++#ifdef CONFIG_MODVERSIONS
++# define MODVERSIONS
++# include <linux/modversions.h>
++#endif /* CONFIG_MODVERSIONS */
++#endif /* KERNEL_VERSION < 2.6.0 */
++#include <linux/sched.h>
++#include <linux/kernel.h>
++#include <linux/mm.h>
++#include <linux/string.h>
++#include <linux/stat.h>
++#include <linux/errno.h>
++#include <linux/wait.h>
++#include <linux/limits.h>
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++#include <linux/locks.h>
++#else
++#include <linux/buffer_head.h>
++#include <linux/pagemap.h>
++#include <linux/namei.h>
++#include <linux/module.h>
++#include <linux/mount.h>
++#include <linux/page-flags.h>
++#include <linux/writeback.h>
++#include <linux/statfs.h>
++#endif
++#include <linux/smp.h>
++#include <linux/smp_lock.h>
++#include <linux/file.h>
++#include <linux/slab.h>
++#include <linux/vmalloc.h>
++#include <linux/poll.h>
++#include <linux/list.h>
++#include <linux/init.h>
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20)
++#include <linux/xattr.h>
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#include <linux/security.h>
++#endif
++
++#include <linux/swap.h>
++
++#include <asm/system.h>
++/* #include <asm/segment.h> */
++#include <asm/mman.h>
++#include <linux/seq_file.h>
++
++/*
++ * MACROS:
++ */
++
++/* those mapped to ATTR_* were copied from linux/fs.h */
++#define FA_MODE		ATTR_MODE
++#define FA_UID		ATTR_UID
++#define FA_GID		ATTR_GID
++#define FA_SIZE		ATTR_SIZE
++#define FA_ATIME	ATTR_ATIME
++#define FA_MTIME	ATTR_MTIME
++#define FA_CTIME	ATTR_CTIME
++#define FA_ATIME_SET	ATTR_ATIME_SET
++#define FA_MTIME_SET	ATTR_MTIME_SET
++#define FA_FORCE	ATTR_FORCE
++#define FA_ATTR_FLAGS	ATTR_ATTR_FLAG
++
++/* must be greater than all other ATTR_* flags! */
++#define FA_NLINK	2048
++#define FA_BLKSIZE	4096
++#define FA_BLOCKS	8192
++#define FA_TIMES	(FA_ATIME|FA_MTIME|FA_CTIME)
++#define FA_ALL		0
++
++/* macros to manage changes between kernels */
++#define INODE_DATA(i)	(&(i)->i_data)
++
++#define MIN(x,y) ((x < y) ? (x) : (y))
++#define MAX(x,y) ((x > y) ? (x) : (y))
++#define MAXPATHLEN PATH_MAX
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,5)
++# define lookup_one_len(a,b,c) lookup_one(a,b)
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,4,5) */
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,8)
++# define generic_file_llseek default_llseek
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,4,8) */
++
++#ifndef SEEK_SET
++# define SEEK_SET 0
++#endif /* not SEEK_SET */
++
++#ifndef SEEK_CUR
++# define SEEK_CUR 1
++#endif /* not SEEK_CUR */
++
++#ifndef SEEK_END
++# define SEEK_END 2
++#endif /* not SEEK_END */
++
++#ifndef DEFAULT_POLLMASK
++# define DEFAULT_POLLMASK (POLLIN | POLLOUT | POLLRDNORM | POLLWRNORM)
++#endif /* not DEFAULT_POLLMASK */
++
++/* XXX: fix this so fistgen generates kfree() code directly */
++#define kfree_s(a,b) kfree(a)
++
++/*
++ * TYPEDEFS:
++ */
++typedef struct dentry dentry_t;
++typedef struct file file_t;
++typedef struct inode inode_t;
++typedef inode_t vnode_t;
++typedef struct page page_t;
++typedef struct qstr qstr_t;
++typedef struct super_block super_block_t;
++typedef super_block_t vfs_t;
++typedef struct vm_area_struct vm_area_t;
++
++
++/*
++ * EXTERNALS:
++ */
++
++#define FPPF(str,page) printk("PPF %s 0x%x/%d: Lck:%d Err:%d Ref:%d Upd:%d Other::%d:%d:%d:%d:\n", \
++		str, \
++		(int) page, \
++		(int) page->index, \
++		(PageLocked(page) ? 1 : 0), \
++		(PageError(page) ? 1 : 0), \
++		(PageReferenced(page) ? 1 : 0), \
++		(Page_Uptodate(page) ? 1 : 0), \
++		(PageDecrAfter(page) ? 1 : 0), \
++		(PageSlab(page) ? 1 : 0), \
++		(PageSwapCache(page) ? 1 : 0), \
++		(PageReserved(page) ? 1 : 0) \
++		)
++#define EZKDBG printk("EZK %s:%d:%s\n",__FILE__,__LINE__,__FUNCTION__)
++#if 0
++# define EZKDBG1 printk("EZK %s:%d\n",__FILE__,__LINE__)
++#else
++# define EZKDBG1
++#endif
++
++extern int fist_get_debug_value(void);
++extern int fist_set_debug_value(int val);
++#if 0 /* mini_fo doesn't need these */
++extern void fist_dprint_internal(int level, char *str,...);
++extern void fist_print_dentry(char *str, const dentry_t *dentry);
++extern void fist_print_inode(char *str, const inode_t *inode);
++extern void fist_print_file(char *str, const file_t *file);
++extern void fist_print_buffer_flags(char *str, struct buffer_head *buffer);
++extern void fist_print_page_flags(char *str, page_t *page);
++extern void fist_print_page_bytes(char *str, page_t *page);
++extern void fist_print_pte_flags(char *str, const page_t *page);
++extern void fist_checkinode(inode_t *inode, char *msg);
++extern void fist_print_sb(char *str, const super_block_t *sb);
++
++/* §$% by mk: special debug functions */
++extern void fist_mk_print_dentry(char *str, const dentry_t *dentry);
++extern void fist_mk_print_inode(char *str, const inode_t *inode);
++
++extern char *add_indent(void);
++extern char *del_indent(void);
++#endif/* mini_fo doesn't need these */
++
++
++#define STATIC
++#define ASSERT(EX)	\
++do {	\
++    if (!(EX)) {	\
++	printk(KERN_CRIT "ASSERTION FAILED: %s at %s:%d (%s)\n", #EX,	\
++	       __FILE__, __LINE__, __FUNCTION__);	\
++	(*((char *)0))=0;	\
++    }	\
++} while (0)
++/* same ASSERT, but tell me who was the caller of the function */
++#define ASSERT2(EX)	\
++do {	\
++    if (!(EX)) {	\
++	printk(KERN_CRIT "ASSERTION FAILED (caller): %s at %s:%d (%s)\n", #EX,	\
++	       file, line, func);	\
++	(*((char *)0))=0;	\
++    }	\
++} while (0)
++
++#if 0 /* mini_fo doesn't need these */
++#define dprintk(format, args...) printk(KERN_DEBUG format, ##args)
++#define fist_dprint(level, str, args...) fist_dprint_internal(level, KERN_DEBUG str, ## args)
++#define print_entry_location() fist_dprint(4, "%sIN:  %s %s:%d\n", add_indent(), __FUNCTION__, __FILE__, __LINE__)
++#define print_exit_location() fist_dprint(4, "%s OUT: %s %s:%d\n", del_indent(), __FUNCTION__, __FILE__, __LINE__)
++#define print_exit_status(status) fist_dprint(4, "%s OUT: %s %s:%d, STATUS: %d\n", del_indent(), __FUNCTION__, __FILE__, __LINE__, status)
++#define print_exit_pointer(status) \
++do { \
++  if (IS_ERR(status)) \
++    fist_dprint(4, "%s OUT: %s %s:%d, RESULT: %ld\n", del_indent(), __FUNCTION__, __FILE__, __LINE__, PTR_ERR(status)); \
++  else \
++    fist_dprint(4, "%s OUT: %s %s:%d, RESULT: 0x%x\n", del_indent(), __FUNCTION__, __FILE__, __LINE__, PTR_ERR(status)); \
++} while (0)
++#endif/* mini_fo doesn't need these */
++
++#endif /* __KERNEL__ */
++
++
++/*
++ * DEFINITIONS FOR USER AND KERNEL CODE:
++ * (Note: ioctl numbers 1--9 are reserved for fistgen, the rest
++ *  are auto-generated automatically based on the user's .fist file.)
++ */
++# define FIST_IOCTL_GET_DEBUG_VALUE	_IOR(0x15, 1, int)
++# define FIST_IOCTL_SET_DEBUG_VALUE	_IOW(0x15, 2, int)
++
++#endif /* not __FIST_H_ */
+--- /dev/null
++++ b/fs/mini_fo/inode.c
+@@ -0,0 +1,1564 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_create(inode_t *dir, dentry_t *dentry, int mode, struct nameidata *nd)
++#else
++mini_fo_create(inode_t *dir, dentry_t *dentry, int mode)
++#endif
++{
++	int err = 0;
++
++	check_mini_fo_dentry(dentry);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	err = create_sto_reg_file(dentry, mode, nd);
++#else
++	err = create_sto_reg_file(dentry, mode);
++#endif
++	check_mini_fo_dentry(dentry);
++	return err;
++}
++
++
++STATIC dentry_t *
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_lookup(inode_t *dir, dentry_t *dentry, struct nameidata* nd)
++#else
++mini_fo_lookup(inode_t *dir, dentry_t *dentry)
++#endif
++{
++	int err = 0;
++	dentry_t *hidden_dir_dentry;
++	dentry_t *hidden_dentry = NULL;
++
++	dentry_t *hidden_sto_dir_dentry;
++	dentry_t *hidden_sto_dentry = NULL;
++
++	/* whiteout flag */
++	int del_flag = 0;
++	char *bpath = NULL;
++
++	const char *name;
++	unsigned int namelen;
++
++	/* Don't allow lookups of META-files */
++	namelen = strlen(META_FILENAME);
++	if(namelen == dentry->d_name.len) {
++		if(!strncmp(dentry->d_name.name, META_FILENAME, namelen)) {
++			err = -ENOENT;
++			goto out;
++		}
++	}
++
++	hidden_dir_dentry = dtohd(dentry->d_parent);
++	hidden_sto_dir_dentry = dtohd2(dentry->d_parent);
++
++	name = dentry->d_name.name;
++	namelen = dentry->d_name.len;
++
++	/* must initialize dentry operations */
++	dentry->d_op = &mini_fo_dops;
++
++	/* setup the del_flag */
++	del_flag = __meta_check_d_entry(dir, name, namelen);
++	bpath = __meta_check_r_entry(dir, name, namelen);
++
++	/* perform the lookups of base and storage files:
++	 *
++	 * This caused some serious trouble, as a lookup_one_len passing
++	 * a negative dentry oopses. Solution is to only do the lookup
++	 * if the dentry is positive, else we set it to NULL
++	 * More trouble, who said a *_dir_dentry can't be NULL?
++	 */
++	if(bpath) {
++		/* Cross-Interposing (C), yeah! */
++		hidden_dentry = bpath_walk(dir->i_sb, bpath);
++		if(!hidden_dentry || !hidden_dentry->d_inode) {
++			printk(KERN_CRIT "mini_fo_lookup: bpath_walk failed.\n");
++			err= -EINVAL;
++			goto out;
++		}
++
++		/* this can be set up safely without fear of spaghetti
++		 * interposing as it is only used for copying times */
++		hidden_dir_dentry = hidden_dentry->d_parent;
++		kfree(bpath);
++	}
++	else if(hidden_dir_dentry && hidden_dir_dentry->d_inode)
++		hidden_dentry =
++			lookup_one_len(name, hidden_dir_dentry, namelen);
++	else
++		hidden_dentry = NULL;
++
++	if(hidden_sto_dir_dentry && hidden_sto_dir_dentry->d_inode)
++		hidden_sto_dentry =
++			lookup_one_len(name, hidden_sto_dir_dentry, namelen);
++	else
++		hidden_sto_dentry =  NULL;
++
++	/* catch error in lookup */
++	if (IS_ERR(hidden_dentry) || IS_ERR(hidden_sto_dentry)) {
++		/* mk: we need to call dput on the dentry, whose
++		 * lookup_one_len operation failed, in order to avoid
++		 * unmount trouble.
++		 */
++		if(IS_ERR(hidden_dentry)) {
++			printk(KERN_CRIT "mini_fo_lookup: ERR from base dentry, lookup failed.\n");
++			err = PTR_ERR(hidden_dentry);
++		} else {
++			dput(hidden_dentry);
++		}
++		if(IS_ERR(hidden_sto_dentry)) {
++			printk(KERN_CRIT "mini_fo_lookup: ERR from storage dentry, lookup failed.\n");
++			err = PTR_ERR(hidden_sto_dentry);
++		} else {
++			dput(hidden_sto_dentry);
++		}
++		goto out;
++	}
++
++	/* allocate dentry private data */
++	__dtopd(dentry) = (struct mini_fo_dentry_info *)
++		kmalloc(sizeof(struct mini_fo_dentry_info), GFP_KERNEL);
++
++	if (!dtopd(dentry)) {
++		err = -ENOMEM;
++		goto out_dput;
++	}
++
++	/* check for different states of the mini_fo file to be looked up. */
++
++	/* state 1, file has been modified */
++	if(hidden_dentry && hidden_sto_dentry &&
++	   hidden_dentry->d_inode && hidden_sto_dentry->d_inode && !del_flag) {
++
++		/* update parent directory's atime */
++		fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode);
++
++		dtopd(dentry)->state = MODIFIED;
++		dtohd(dentry) = hidden_dentry;
++		dtohd2(dentry) = hidden_sto_dentry;
++
++		err = mini_fo_tri_interpose(hidden_dentry,
++					    hidden_sto_dentry,
++					    dentry, dir->i_sb, 1);
++		if (err) {
++			printk(KERN_CRIT "mini_fo_lookup: error interposing (state1).\n");
++			goto out_free;
++		}
++		goto out;
++	}
++	/* state 2, file is unmodified */
++	if(hidden_dentry && hidden_dentry->d_inode && !del_flag) {
++
++		fist_copy_attr_atime(dir, hidden_dir_dentry->d_inode);
++
++		dtopd(dentry)->state = UNMODIFIED;
++		dtohd(dentry) = hidden_dentry;
++		dtohd2(dentry) = hidden_sto_dentry; /* could be negative */
++
++		err = mini_fo_tri_interpose(hidden_dentry,
++					    hidden_sto_dentry,
++					    dentry, dir->i_sb, 1);
++		if (err) {
++			printk(KERN_CRIT "mini_fo_lookup: error interposing (state2).\n");
++			goto out_free;
++		}
++		goto out;
++	}
++	/* state 3, file has been newly created */
++	if(hidden_sto_dentry && hidden_sto_dentry->d_inode && !del_flag) {
++
++		fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode);
++		dtopd(dentry)->state = CREATED;
++		dtohd(dentry) = hidden_dentry; /* could be negative */
++		dtohd2(dentry) = hidden_sto_dentry;
++
++		err = mini_fo_tri_interpose(hidden_dentry,
++					    hidden_sto_dentry,
++					    dentry, dir->i_sb, 1);
++		if (err) {
++			printk(KERN_CRIT "mini_fo_lookup: error interposing (state3).\n");
++			goto out_free;
++		}
++		goto out;
++	}
++
++	/* state 4, file has deleted and created again. */
++	if(hidden_dentry && hidden_sto_dentry &&
++	   hidden_dentry->d_inode &&
++	   hidden_sto_dentry->d_inode && del_flag) {
++
++		fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode);
++		dtopd(dentry)->state = DEL_REWRITTEN;
++		dtohd(dentry) = NULL;
++		dtohd2(dentry) = hidden_sto_dentry;
++
++		err = mini_fo_tri_interpose(NULL,
++					    hidden_sto_dentry,
++					    dentry, dir->i_sb, 1);
++		if (err) {
++			printk(KERN_CRIT "mini_fo_lookup: error interposing (state4).\n");
++			goto out_free;
++		}
++		/* We will never need this dentry again, as the file has been
++		 * deleted from base */
++		dput(hidden_dentry);
++		goto out;
++	}
++	/* state 5, file has been deleted in base */
++	if(hidden_dentry && hidden_sto_dentry &&
++	   hidden_dentry->d_inode &&
++	   !hidden_sto_dentry->d_inode && del_flag) {
++
++		/* check which parents atime we need for updating */
++		if(hidden_sto_dir_dentry->d_inode)
++			fist_copy_attr_atime(dir,
++					     hidden_sto_dir_dentry->d_inode);
++		else
++			fist_copy_attr_atime(dir,
++					     hidden_dir_dentry->d_inode);
++
++		dtopd(dentry)->state = DELETED;
++		dtohd(dentry) = NULL;
++		dtohd2(dentry) = hidden_sto_dentry;
++
++		/* add negative dentry to dcache to speed up lookups */
++		d_add(dentry, NULL);
++		dput(hidden_dentry);
++		goto out;
++	}
++	/* state 6, file does not exist */
++	if(((hidden_dentry && !hidden_dentry->d_inode) ||
++	    (hidden_sto_dentry && !hidden_sto_dentry->d_inode)) && !del_flag)
++		{
++			/* check which parents atime we need for updating */
++			if(hidden_sto_dir_dentry && hidden_sto_dir_dentry->d_inode)
++				fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode);
++			else
++				fist_copy_attr_atime(dir, hidden_dir_dentry->d_inode);
++
++			dtopd(dentry)->state = NON_EXISTANT;
++			dtohd(dentry) = hidden_dentry;
++			dtohd2(dentry) = hidden_sto_dentry;
++			d_add(dentry, NULL);
++			goto out;
++		}
++
++	/* if we get to here, were in an invalid state. bad. */
++	printk(KERN_CRIT "mini_fo_lookup: ERROR, meta data corruption detected.\n");
++
++	/* end state checking */
++ out_free:
++	d_drop(dentry);		/* so that our bad dentry will get destroyed */
++	kfree(dtopd(dentry));
++	__dtopd(dentry) = NULL;	/* be safe */
++
++ out_dput:
++	if(hidden_dentry)
++		dput(hidden_dentry);
++	if(hidden_sto_dentry)
++		dput(hidden_sto_dentry); /* drops usage count and marks for release */
++
++ out:
++	/* initalize wol if file exists and is directory */
++	if(dentry->d_inode) {
++		if(S_ISDIR(dentry->d_inode->i_mode)) {
++			itopd(dentry->d_inode)->deleted_list_size = -1;
++			itopd(dentry->d_inode)->renamed_list_size = -1;
++			meta_build_lists(dentry);
++		}
++	}
++	return ERR_PTR(err);
++}
++
++
++STATIC int
++mini_fo_link(dentry_t *old_dentry, inode_t *dir, dentry_t *new_dentry)
++{
++	int err;
++	dentry_t *hidden_old_dentry;
++	dentry_t *hidden_new_dentry;
++	dentry_t *hidden_dir_dentry;
++
++
++	check_mini_fo_dentry(old_dentry);
++	check_mini_fo_dentry(new_dentry);
++	check_mini_fo_inode(dir);
++
++	/* no links to directorys and existing targets target allowed */
++	if(S_ISDIR(old_dentry->d_inode->i_mode) ||
++	   is_mini_fo_existant(new_dentry)) {
++		err = -EPERM;
++		goto out;
++	}
++
++	/* bring it directly from unmod to del_rew */
++	if(dtost(old_dentry) == UNMODIFIED) {
++		err = nondir_unmod_to_mod(old_dentry, 1);
++		if(err) {
++			err = -EINVAL;
++			goto out;
++		}
++		err = meta_add_d_entry(old_dentry->d_parent,
++				       old_dentry->d_name.name,
++				       old_dentry->d_name.len);
++		if(err) {
++			err = -EINVAL;
++			goto out;
++		}
++		dput(dtohd(old_dentry));
++		dtohd(old_dentry) = NULL;
++		dtost(old_dentry) = DEL_REWRITTEN;
++	}
++
++	err = get_neg_sto_dentry(new_dentry);
++	if(err) {
++		err = -EINVAL;
++		goto out;
++	}
++
++	hidden_old_dentry = dtohd2(old_dentry);
++	hidden_new_dentry = dtohd2(new_dentry);
++
++	dget(hidden_old_dentry);
++	dget(hidden_new_dentry);
++
++	/* was: hidden_dir_dentry = lock_parent(hidden_new_dentry); */
++	hidden_dir_dentry = dget(hidden_new_dentry->d_parent);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = vfs_link(hidden_old_dentry,
++		       hidden_dir_dentry->d_inode,
++		       hidden_new_dentry);
++	if (err || !hidden_new_dentry->d_inode)
++		goto out_lock;
++
++	dtost(new_dentry) = CREATED;
++ 	err = mini_fo_tri_interpose(NULL, hidden_new_dentry, new_dentry, dir->i_sb, 0);
++	if (err)
++		goto out_lock;
++
++	fist_copy_attr_timesizes(dir, hidden_new_dentry->d_inode);
++	/* propagate number of hard-links */
++	old_dentry->d_inode->i_nlink = itohi2(old_dentry->d_inode)->i_nlink;
++
++ out_lock:
++	/* was: unlock_dir(hidden_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_dir_dentry);
++
++	dput(hidden_new_dentry);
++	dput(hidden_old_dentry);
++	if (!new_dentry->d_inode)
++		d_drop(new_dentry);
++
++ out:
++	return err;
++}
++
++
++STATIC int
++mini_fo_unlink(inode_t *dir, dentry_t *dentry)
++{
++	int err = 0;
++
++	dget(dentry);
++	if(dtopd(dentry)->state == MODIFIED) {
++		err = nondir_mod_to_del(dentry);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == UNMODIFIED) {
++		err = nondir_unmod_to_del(dentry);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == CREATED) {
++		err = nondir_creat_to_del(dentry);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == DEL_REWRITTEN) {
++		err = nondir_del_rew_to_del(dentry);
++		goto out;
++	}
++
++	printk(KERN_CRIT "mini_fo_unlink: ERROR, invalid state detected.\n");
++
++ out:
++	fist_copy_attr_times(dir, itohi2(dentry->d_parent->d_inode));
++
++	if(!err) {
++		/* is this causing my pain? d_delete(dentry); */
++		d_drop(dentry);
++	}
++
++	dput(dentry);
++	return err;
++}
++
++
++STATIC int
++mini_fo_symlink(inode_t *dir, dentry_t *dentry, const char *symname)
++{
++	int err=0;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++        umode_t mode;
++#endif
++
++	/* Fail if the symlink file exists */
++	if(!(dtost(dentry) == DELETED ||
++	     dtost(dentry) == NON_EXISTANT)) {
++		err = -EEXIST;
++		goto out;
++	}
++
++	err = get_neg_sto_dentry(dentry);
++	if(err) {
++		err = -EINVAL;
++		goto out;
++	}
++	hidden_sto_dentry = dtohd2(dentry);
++
++	dget(hidden_sto_dentry);
++	/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	mode = S_IALLUGO;
++	err = vfs_symlink(hidden_sto_dir_dentry->d_inode,
++			  hidden_sto_dentry, symname, mode);
++#else
++	err = vfs_symlink(hidden_sto_dir_dentry->d_inode,
++			  hidden_sto_dentry,
++			  symname);
++#endif
++	if (err || !hidden_sto_dentry->d_inode)
++                goto out_lock;
++
++        if(dtost(dentry) == DELETED) {
++                dtost(dentry) = DEL_REWRITTEN;
++                err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0);
++                if(err)
++                        goto out_lock;
++        } else if(dtost(dentry) == NON_EXISTANT) {
++                dtost(dentry) = CREATED;
++                err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0);
++                if(err)
++                        goto out_lock;
++        }
++	fist_copy_attr_timesizes(dir, hidden_sto_dir_dentry->d_inode);
++
++ out_lock:
++        /* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++
++        dput(hidden_sto_dentry);
++        if (!dentry->d_inode)
++                d_drop(dentry);
++ out:
++        return err;
++}
++
++STATIC int
++mini_fo_mkdir(inode_t *dir, dentry_t *dentry, int mode)
++{
++	int err;
++
++	err = create_sto_dir(dentry, mode);
++
++	check_mini_fo_dentry(dentry);
++
++	return err;
++}
++
++
++STATIC int
++mini_fo_rmdir(inode_t *dir, dentry_t *dentry)
++{
++	int err = 0;
++
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++	dentry_t *meta_dentry;
++	inode_t *hidden_sto_dir = NULL;
++
++	check_mini_fo_dentry(dentry);
++	check_mini_fo_inode(dir);
++
++	dget(dentry);
++	if(dtopd(dentry)->state == MODIFIED) {
++		/* XXX: disabled, because it does not bother to check files on
++		 * the original filesystem - just a hack, but better than simply
++		 * removing it without testing */
++		err = -EINVAL;
++		goto out;
++
++		hidden_sto_dir = itohi2(dir);
++		hidden_sto_dentry = dtohd2(dentry);
++
++		/* was:hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++		hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++		/* Delete an old WOL file contained in the storage dir */
++		meta_dentry = lookup_one_len(META_FILENAME,
++					     hidden_sto_dentry,
++					     strlen(META_FILENAME));
++		if(meta_dentry->d_inode) {
++			err = vfs_unlink(hidden_sto_dentry->d_inode, meta_dentry);
++			dput(meta_dentry);
++			if(!err)
++				d_delete(meta_dentry);
++		}
++
++		err = vfs_rmdir(hidden_sto_dir, hidden_sto_dentry);
++		dput(hidden_sto_dentry);
++		if(!err)
++			d_delete(hidden_sto_dentry);
++
++		/* propagate number of hard-links */
++		dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++
++		dput(dtohd(dentry));
++
++		dtohd(dentry) = NULL;
++		dtopd(dentry)->state = DELETED;
++
++		/* carefull with R files */
++		if( __meta_is_r_entry(dir,
++				      dentry->d_name.name,
++				      dentry->d_name.len) == 1) {
++			err = meta_remove_r_entry(dentry->d_parent,
++						  dentry->d_name.name,
++						  dentry->d_name.len);
++			if(err) {
++				printk(KERN_CRIT "mini_fo: rmdir: meta_remove_r_entry failed.\n");
++				goto out;
++			}
++		}
++		else {
++			/* ok, add deleted file to META */
++			meta_add_d_entry(dentry->d_parent,
++					 dentry->d_name.name,
++					 dentry->d_name.len);
++		}
++		/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++		dput(hidden_sto_dir_dentry);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == UNMODIFIED) {
++		/* XXX: simply adding it to the delete list here is fscking dangerous!
++		 * as a temporary hack, i will disable rmdir on unmodified directories
++		 * for now.
++		 */
++		err = -EINVAL;
++		goto out;
++
++		err = get_neg_sto_dentry(dentry);
++		if(err) {
++			err = -EINVAL;
++			goto out;
++		}
++
++		/* dput base dentry, this will relase the inode and free the
++		 * dentry, as we will never need it again. */
++		dput(dtohd(dentry));
++		dtohd(dentry) = NULL;
++		dtopd(dentry)->state = DELETED;
++
++		/* add deleted file to META-file */
++		meta_add_d_entry(dentry->d_parent,
++				 dentry->d_name.name,
++				 dentry->d_name.len);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == CREATED) {
++		hidden_sto_dir = itohi2(dir);
++		hidden_sto_dentry = dtohd2(dentry);
++
++		/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry);*/
++		hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++		/* Delete an old WOL file contained in the storage dir */
++		meta_dentry = lookup_one_len(META_FILENAME,
++					     hidden_sto_dentry,
++					     strlen(META_FILENAME));
++		if(meta_dentry->d_inode) {
++			/* is this necessary? dget(meta_dentry); */
++			err = vfs_unlink(hidden_sto_dentry->d_inode,
++					 meta_dentry);
++			dput(meta_dentry);
++			if(!err)
++				d_delete(meta_dentry);
++		}
++
++		err = vfs_rmdir(hidden_sto_dir, hidden_sto_dentry);
++		dput(hidden_sto_dentry);
++		if(!err)
++			d_delete(hidden_sto_dentry);
++
++		/* propagate number of hard-links */
++		dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++		dtopd(dentry)->state = NON_EXISTANT;
++
++		/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++		dput(hidden_sto_dir_dentry);
++
++		goto out;
++	}
++	else if(dtopd(dentry)->state == DEL_REWRITTEN) {
++		hidden_sto_dir = itohi2(dir);
++		hidden_sto_dentry = dtohd2(dentry);
++
++		/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry);*/
++		hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++		/* Delete an old WOL file contained in the storage dir */
++		meta_dentry = lookup_one_len(META_FILENAME,
++					     hidden_sto_dentry,
++					     strlen(META_FILENAME));
++		if(meta_dentry->d_inode) {
++			/* is this necessary? dget(meta_dentry); */
++			err = vfs_unlink(hidden_sto_dentry->d_inode,
++					 meta_dentry);
++			dput(meta_dentry);
++			if(!err)
++				d_delete(meta_dentry);
++		}
++
++		err = vfs_rmdir(hidden_sto_dir, hidden_sto_dentry);
++		dput(hidden_sto_dentry);
++		if(!err)
++			d_delete(hidden_sto_dentry);
++
++		/* propagate number of hard-links */
++		dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++		dtopd(dentry)->state = DELETED;
++		/* was: unlock_dir(hidden_sto_dir_dentry); */
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++		dput(hidden_sto_dir_dentry);
++		goto out;
++	}
++
++	printk(KERN_CRIT "mini_fo_rmdir: ERROR, invalid state detected.\n");
++
++ out:
++	if(!err) {
++		d_drop(dentry);
++	}
++
++	fist_copy_attr_times(dir, itohi2(dentry->d_parent->d_inode));
++	dput(dentry);
++
++	return err;
++}
++
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_mknod(inode_t *dir, dentry_t *dentry, int mode, dev_t dev)
++#else
++mini_fo_mknod(inode_t *dir, dentry_t *dentry, int mode, int dev)
++#endif
++{
++	int err = 0;
++
++	check_mini_fo_dentry(dentry);
++
++	err = create_sto_nod(dentry, mode, dev);
++	if(err) {
++		printk(KERN_CRIT "mini_fo_mknod: creating sto nod failed.\n");
++		err = -EINVAL;
++	}
++
++	check_mini_fo_dentry(dentry);
++	return err;
++}
++
++
++STATIC int
++mini_fo_rename(inode_t *old_dir, dentry_t *old_dentry,
++	       inode_t *new_dir, dentry_t *new_dentry)
++{
++	/* dispatch */
++	if(S_ISDIR(old_dentry->d_inode->i_mode))
++		return rename_directory(old_dir, old_dentry, new_dir, new_dentry);
++	return rename_nondir(old_dir, old_dentry, new_dir, new_dentry);
++
++}
++
++int rename_directory(inode_t *old_dir, dentry_t *old_dentry,
++		     inode_t *new_dir, dentry_t *new_dentry)
++{
++	int err, bpath_len;
++	char *bpath;
++
++	dentry_t *hidden_old_dentry;
++	dentry_t *hidden_new_dentry;
++	dentry_t *hidden_old_dir_dentry;
++	dentry_t *hidden_new_dir_dentry;
++
++	err = 0;
++	bpath = NULL;
++	bpath_len = 0;
++
++	/* this is a test, chuck out if it works */
++	if(!(dtopd(new_dentry)->state == DELETED ||
++	     dtopd(new_dentry)->state == NON_EXISTANT)) {
++		printk(KERN_CRIT "mini_fo: rename_directory: \
++                                  uh, ah, new_dentry not negative.\n");
++		/* return -1; */
++	}
++
++	/* state = UNMODIFIED */
++	if(dtopd(old_dentry)->state == UNMODIFIED) {
++		err = dir_unmod_to_mod(old_dentry);
++		if (err)
++			goto out;
++	}
++
++	/* state = MODIFIED */
++	if(dtopd(old_dentry)->state == MODIFIED) {
++		bpath = meta_check_r_entry(old_dentry->d_parent,
++					   old_dentry->d_name.name,
++					   old_dentry->d_name.len);
++		if(bpath) {
++			err = meta_remove_r_entry(old_dentry->d_parent,
++						  old_dentry->d_name.name,
++						  old_dentry->d_name.len);
++			if(err) {
++				printk(KERN_CRIT "mini_fo: rename_directory:\
++                                                   meta_remove_r_entry \
++                                                  failed.\n");
++				goto out;
++			}
++			err = meta_add_r_entry(new_dentry->d_parent,
++					       bpath,
++					       strlen(bpath),
++					       new_dentry->d_name.name,
++					       new_dentry->d_name.len);
++			kfree(bpath);
++		}
++		else {/* wol it */
++			err = meta_add_d_entry(old_dentry->d_parent,
++					       old_dentry->d_name.name,
++					       old_dentry->d_name.len);
++			if (err)
++				goto out;
++			/* put it on rename list */
++			err = get_mini_fo_bpath(old_dentry,
++						&bpath,
++						&bpath_len);
++			if (err)
++				goto out;
++			err = meta_add_r_entry(new_dentry->d_parent,
++					       bpath, bpath_len,
++					       new_dentry->d_name.name,
++					       new_dentry->d_name.len);
++			if (err)
++				goto out;
++		}
++		/* no state change, MODIFIED stays MODIFIED */
++	}
++	/* state = CREATED */
++	if(dtopd(old_dentry)->state == CREATED ||
++	   dtopd(old_dentry)->state == DEL_REWRITTEN) {
++		if(dtohd(old_dentry))
++			dput(dtohd(old_dentry));
++
++		if(dtopd(new_dentry)->state == DELETED) {
++			dtopd(old_dentry)->state = DEL_REWRITTEN;
++			dtohd(old_dentry) = NULL;
++		}
++		else if(dtopd(new_dentry)->state == NON_EXISTANT) {
++			dtopd(old_dentry)->state = CREATED;
++			/* steal new dentry's neg. base dentry */
++			dtohd(old_dentry) = dtohd(new_dentry);
++			dtohd(new_dentry) = NULL;
++		}
++	}
++	if(dtopd(new_dentry)->state == UNMODIFIED ||
++	   dtopd(new_dentry)->state == NON_EXISTANT) {
++		err = get_neg_sto_dentry(new_dentry);
++		if(err)
++			goto out;
++	}
++
++	/* now move sto file */
++	hidden_old_dentry = dtohd2(old_dentry);
++	hidden_new_dentry = dtohd2(new_dentry);
++
++	dget(hidden_old_dentry);
++	dget(hidden_new_dentry);
++
++	hidden_old_dir_dentry = dget(hidden_old_dentry->d_parent);
++	hidden_new_dir_dentry = dget(hidden_new_dentry->d_parent);
++	double_lock(hidden_old_dir_dentry, hidden_new_dir_dentry);
++
++	err = vfs_rename(hidden_old_dir_dentry->d_inode, hidden_old_dentry,
++			 hidden_new_dir_dentry->d_inode, hidden_new_dentry);
++	if(err)
++		goto out_lock;
++
++	fist_copy_attr_all(new_dir, hidden_new_dir_dentry->d_inode);
++	if (new_dir != old_dir)
++		fist_copy_attr_all(old_dir,
++				   hidden_old_dir_dentry->d_inode);
++
++ out_lock:
++	/* double_unlock will dput the new/old parent dentries
++	 * whose refcnts were incremented via get_parent above. */
++	double_unlock(hidden_old_dir_dentry, hidden_new_dir_dentry);
++	dput(hidden_new_dentry);
++	dput(hidden_old_dentry);
++
++ out:
++	return err;
++}
++
++int rename_nondir(inode_t *old_dir, dentry_t *old_dentry,
++		  inode_t *new_dir, dentry_t *new_dentry)
++{
++	int err=0;
++
++	check_mini_fo_dentry(old_dentry);
++	check_mini_fo_dentry(new_dentry);
++	check_mini_fo_inode(old_dir);
++	check_mini_fo_inode(new_dir);
++
++	/* state: UNMODIFIED */
++	if(dtost(old_dentry) == UNMODIFIED) {
++		err = nondir_unmod_to_mod(old_dentry, 1);
++		if(err) {
++			err = -EINVAL;
++			goto out;
++		}
++	}
++
++	/* the easy states */
++	if(exists_in_storage(old_dentry)) {
++
++		dentry_t *hidden_old_dentry;
++		dentry_t *hidden_new_dentry;
++		dentry_t *hidden_old_dir_dentry;
++		dentry_t *hidden_new_dir_dentry;
++
++		/* if old file is MODIFIED, add it to the deleted_list */
++		if(dtopd(old_dentry)->state == MODIFIED) {
++			meta_add_d_entry(old_dentry->d_parent,
++					 old_dentry->d_name.name,
++					 old_dentry->d_name.len);
++
++			dput(dtohd(old_dentry));
++		}
++		/* if old file is CREATED, we only release the base dentry */
++		if(dtopd(old_dentry)->state == CREATED) {
++			if(dtohd(old_dentry))
++				dput(dtohd(old_dentry));
++		}
++
++		/* now setup the new states (depends on new_dentry state) */
++		/* new dentry state =  MODIFIED */
++		if(dtopd(new_dentry)->state == MODIFIED) {
++			meta_add_d_entry(new_dentry->d_parent,
++					 new_dentry->d_name.name,
++					 new_dentry->d_name.len);
++
++			/* new dentry will be d_put'ed later by the vfs
++			 * so don't do it here
++			 * dput(dtohd(new_dentry));
++			 */
++			dtohd(old_dentry) = NULL;
++			dtopd(old_dentry)->state = DEL_REWRITTEN;
++		}
++		/* new dentry state =  UNMODIFIED */
++		else if(dtopd(new_dentry)->state == UNMODIFIED) {
++			if(get_neg_sto_dentry(new_dentry))
++				return -EINVAL;
++
++			meta_add_d_entry(new_dentry->d_parent,
++					 new_dentry->d_name.name,
++					 new_dentry->d_name.len);
++
++			/* is this right??? */
++			/*dput(dtohd(new_dentry));*/
++			dtohd(old_dentry) = NULL;
++			dtopd(old_dentry)->state = DEL_REWRITTEN;
++		}
++		/* new dentry state =  CREATED */
++		else if(dtopd(new_dentry)->state == CREATED) {
++			/* we keep the neg. base dentry (if exists) */
++			dtohd(old_dentry) = dtohd(new_dentry);
++			/* ...and set it to Null, or we'll get
++			 * dcache.c:345 if it gets dput twice... */
++			dtohd(new_dentry) = NULL;
++			dtopd(old_dentry)->state = CREATED;
++		}
++		/* new dentry state =  NON_EXISTANT */
++		else if(dtopd(new_dentry)->state == NON_EXISTANT) {
++			if(get_neg_sto_dentry(new_dentry))
++				return -EINVAL;
++
++			/* we keep the neg. base dentry (if exists) */
++			dtohd(old_dentry) = dtohd(new_dentry);
++			/* ...and set it to Null, or we'll get
++			 * Dr. dcache.c:345 if it gets dput twice... */
++			dtohd(new_dentry) = NULL;
++			dtopd(old_dentry)->state = CREATED;
++		}
++		/* new dentry state =  DEL_REWRITTEN or DELETED */
++		else if(dtopd(new_dentry)->state == DEL_REWRITTEN ||
++			dtopd(new_dentry)->state == DELETED) {
++			dtohd(old_dentry) = NULL;
++			dtopd(old_dentry)->state = DEL_REWRITTEN;
++		}
++		else { /* not possible, uhh, ahh */
++			printk(KERN_CRIT
++			       "mini_fo: rename_reg_file: invalid state detected [1].\n");
++			return -1;
++		}
++
++		/* now we definitely have a sto file */
++		hidden_old_dentry = dtohd2(old_dentry);
++		hidden_new_dentry = dtohd2(new_dentry);
++
++		dget(hidden_old_dentry);
++		dget(hidden_new_dentry);
++
++		hidden_old_dir_dentry = dget(hidden_old_dentry->d_parent);
++		hidden_new_dir_dentry = dget(hidden_new_dentry->d_parent);
++		double_lock(hidden_old_dir_dentry, hidden_new_dir_dentry);
++
++		err = vfs_rename(hidden_old_dir_dentry->d_inode,
++				 hidden_old_dentry,
++				 hidden_new_dir_dentry->d_inode,
++				 hidden_new_dentry);
++		if(err)
++			goto out_lock;
++
++		fist_copy_attr_all(new_dir, hidden_new_dir_dentry->d_inode);
++		if (new_dir != old_dir)
++			fist_copy_attr_all(old_dir, hidden_old_dir_dentry->d_inode);
++
++	out_lock:
++		/* double_unlock will dput the new/old parent dentries
++		 * whose refcnts were incremented via get_parent above.
++		 */
++		double_unlock(hidden_old_dir_dentry, hidden_new_dir_dentry);
++		dput(hidden_new_dentry);
++		dput(hidden_old_dentry);
++	out:
++		return err;
++	}
++	else { /* invalid state */
++		printk(KERN_CRIT "mini_fo: rename_reg_file: ERROR: invalid state detected [2].\n");
++		return -1;
++	}
++}
++
++
++STATIC int
++mini_fo_readlink(dentry_t *dentry, char *buf, int bufsiz)
++{
++	int err=0;
++	dentry_t *hidden_dentry = NULL;
++
++	if(dtohd2(dentry) && dtohd2(dentry)->d_inode) {
++		hidden_dentry = dtohd2(dentry);
++	} else if(dtohd(dentry) && dtohd(dentry)->d_inode) {
++		hidden_dentry = dtohd(dentry);
++	} else {
++		goto out;
++	}
++
++	if (!hidden_dentry->d_inode->i_op ||
++	    !hidden_dentry->d_inode->i_op->readlink) {
++		err = -EINVAL;		goto out;
++	}
++
++	err = hidden_dentry->d_inode->i_op->readlink(hidden_dentry,
++						     buf,
++						     bufsiz);
++	if (err > 0)
++		fist_copy_attr_atime(dentry->d_inode, hidden_dentry->d_inode);
++
++ out:
++	return err;
++}
++
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
++static int mini_fo_follow_link(dentry_t *dentry, struct nameidata *nd)
++#else
++static void* mini_fo_follow_link(dentry_t *dentry, struct nameidata *nd)
++#endif
++{
++	char *buf;
++	int len = PAGE_SIZE, err;
++	mm_segment_t old_fs;
++
++	/* in 2.6 this is freed by mini_fo_put_link called by __do_follow_link */
++	buf = kmalloc(len, GFP_KERNEL);
++	if (!buf) {
++		err = -ENOMEM;
++		goto out;
++	}
++
++	/* read the symlink, and then we will follow it */
++	old_fs = get_fs();
++	set_fs(KERNEL_DS);
++	err = dentry->d_inode->i_op->readlink(dentry, buf, len);
++	set_fs(old_fs);
++	if (err < 0) {
++		kfree(buf);
++		buf = NULL;
++		goto out;
++	}
++	buf[err] = 0;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++        nd_set_link(nd, buf);
++        err = 0;
++#else
++	err = vfs_follow_link(nd, buf);
++#endif
++
++ out:
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	kfree(buf);
++#endif
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
++        return err;
++#else
++        return ERR_PTR(err);
++#endif
++}
++
++STATIC
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
++void mini_fo_put_link(struct dentry *dentry, struct nameidata *nd)
++#else
++void mini_fo_put_link(struct dentry *dentry, struct nameidata *nd, void *cookie)
++#endif
++{
++        char *link;
++        link = nd_get_link(nd);
++        kfree(link);
++}
++#endif
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_permission(inode_t *inode, int mask, struct nameidata *nd)
++#else
++mini_fo_permission(inode_t *inode, int mask)
++#endif
++{
++	inode_t *hidden_inode;
++	int mode;
++	int err;
++
++	if(itohi2(inode)) {
++		hidden_inode = itohi2(inode);
++	} else {
++		hidden_inode = itohi(inode);
++	}
++	mode = inode->i_mode;
++
++	/* not really needed, as permission handles everything:
++	 *	err = vfs_permission(inode, mask);
++	 *	if (err)
++	 *		goto out;
++	 */
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	err = permission(hidden_inode, mask, nd);
++#else
++	err = permission(hidden_inode, mask);
++#endif
++
++	/*  out: */
++	return err;
++}
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++STATIC int
++mini_fo_inode_revalidate(dentry_t *dentry)
++{
++	int err = 0;
++	dentry_t *hidden_dentry;
++	inode_t *hidden_inode;
++
++	ASSERT(dentry->d_inode);
++	ASSERT(itopd(dentry->d_inode));
++
++	if(itohi2(dentry->d_inode)) {
++                hidden_dentry = dtohd2(dentry);
++		hidden_inode = hidden_dentry->d_inode;
++	} else if(itohi(dentry->d_inode)) {
++                hidden_dentry = dtohd(dentry);
++		hidden_inode = hidden_dentry->d_inode;
++	} else {
++                printk(KERN_CRIT "mini_fo_inode_revalidate: ERROR, invalid state detected.\n");
++                err = -ENOENT;
++                goto out;
++        }
++	if (hidden_inode && hidden_inode->i_op && hidden_inode->i_op->revalidate){
++		err = hidden_inode->i_op->revalidate(hidden_dentry);
++		if (err)
++			goto out;
++	}
++	fist_copy_attr_all(dentry->d_inode, hidden_inode);
++ out:
++	return err;
++}
++#endif
++
++STATIC int
++mini_fo_setattr(dentry_t *dentry, struct iattr *ia)
++{
++	int err = 0;
++
++	check_mini_fo_dentry(dentry);
++
++	if(!is_mini_fo_existant(dentry)) {
++		printk(KERN_CRIT "mini_fo_setattr: ERROR, invalid state detected [1].\n");
++		goto out;
++	}
++
++	if(dtost(dentry) == UNMODIFIED) {
++		if(!IS_COPY_FLAG(ia->ia_valid))
++			goto out; /* we ignore these changes to base */
++
++		if(S_ISDIR(dentry->d_inode->i_mode)) {
++			err = dir_unmod_to_mod(dentry);
++		} else {
++			/* we copy contents if file is not beeing truncated */
++			if(S_ISREG(dentry->d_inode->i_mode) &&
++			   !(ia->ia_size == 0 && (ia->ia_valid & ATTR_SIZE))) {
++				err = nondir_unmod_to_mod(dentry, 1);
++			} else
++				err = nondir_unmod_to_mod(dentry, 0);
++		}
++		if(err) {
++			err = -EINVAL;
++			printk(KERN_CRIT "mini_fo_setattr: ERROR changing states.\n");
++			goto out;
++		}
++	}
++	if(!exists_in_storage(dentry)) {
++		printk(KERN_CRIT "mini_fo_setattr: ERROR, invalid state detected [2].\n");
++		err = -EINVAL;
++		goto out;
++	}
++	ASSERT(dentry->d_inode);
++	ASSERT(dtohd2(dentry));
++	ASSERT(itopd(dentry->d_inode));
++	ASSERT(itohi2(dentry->d_inode));
++
++	err = notify_change(dtohd2(dentry), ia);
++	fist_copy_attr_all(dentry->d_inode, itohi2(dentry->d_inode));
++ out:
++	return err;
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++STATIC int
++mini_fo_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat)
++{
++	int err = 0;
++        dentry_t *hidden_dentry;
++
++	ASSERT(dentry->d_inode);
++	ASSERT(itopd(dentry->d_inode));
++
++	if(itohi2(dentry->d_inode)) {
++                hidden_dentry = dtohd2(dentry);
++	} else if(itohi(dentry->d_inode)) {
++                hidden_dentry = dtohd(dentry);
++	} else {
++                printk(KERN_CRIT "mini_fo_getattr: ERROR, invalid state detected.\n");
++                err = -ENOENT;
++                goto out;
++        }
++	fist_copy_attr_all(dentry->d_inode, hidden_dentry->d_inode);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	generic_fillattr(dentry->d_inode, stat);
++	if (!stat->blksize) {
++		struct super_block *s = hidden_dentry->d_inode->i_sb;
++		unsigned blocks;
++		blocks = (stat->size+s->s_blocksize-1) >> s->s_blocksize_bits;
++		stat->blocks = (s->s_blocksize / 512) * blocks;
++		stat->blksize = s->s_blocksize;
++	}
++ out:
++        return err;
++}
++#endif
++
++#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20))
++#if 0 /* no xattr_alloc() and xattr_free() */
++/* This is lifted from fs/xattr.c */
++static void *
++xattr_alloc(size_t size, size_t limit)
++{
++	void *ptr;
++
++	if (size > limit)
++		return ERR_PTR(-E2BIG);
++
++	if (!size)	/* size request, no buffer is needed */
++		return NULL;
++	else if (size <= PAGE_SIZE)
++		ptr = kmalloc((unsigned long) size, GFP_KERNEL);
++	else
++		ptr = vmalloc((unsigned long) size);
++	if (!ptr)
++		return ERR_PTR(-ENOMEM);
++	return ptr;
++}
++
++static void
++xattr_free(void *ptr, size_t size)
++{
++	if (!size)	/* size request, no buffer was needed */
++		return;
++	else if (size <= PAGE_SIZE)
++		kfree(ptr);
++	else
++		vfree(ptr);
++}
++#endif /* no xattr_alloc() and xattr_free() */
++
++/* BKL held by caller.
++ * dentry->d_inode->i_sem down
++ */
++STATIC int
++mini_fo_getxattr(struct dentry *dentry, const char *name, void *value, size_t size) {
++	struct dentry *hidden_dentry = NULL;
++	int err = -EOPNOTSUPP;
++	/* Define these anyway so we don't need as much ifdef'ed code. */
++	char *encoded_name = NULL;
++	char *encoded_value = NULL;
++
++	check_mini_fo_dentry(dentry);
++
++	if(exists_in_storage(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else
++		hidden_dentry = dtohd(dentry);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	if (hidden_dentry->d_inode->i_op->getxattr) {
++		encoded_name = (char *)name;
++		encoded_value = (char *)value;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_dentry->d_inode->i_sem);
++#endif
++		/* lock_kernel() already done by caller. */
++		err = hidden_dentry->d_inode->i_op->getxattr(hidden_dentry, encoded_name, encoded_value, size);
++		/* unlock_kernel() will be done by caller. */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_dentry->d_inode->i_sem);
++#endif
++	}
++	return err;
++}
++
++/* BKL held by caller.
++ * dentry->d_inode->i_sem down
++ */
++STATIC int
++#if ((LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,21) \
++     && LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,23)) \
++     || LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
++mini_fo_setxattr(struct dentry *dentry, const char *name,
++		 const void *value, size_t size, int flags)
++#else
++mini_fo_setxattr(struct dentry *dentry, const char *name,
++		 void *value, size_t size, int flags)
++#endif
++
++{
++	struct dentry *hidden_dentry = NULL;
++	int err = -EOPNOTSUPP;
++
++	/* Define these anyway, so we don't have as much ifdef'ed code. */
++	char *encoded_value = NULL;
++	char *encoded_name = NULL;
++
++	check_mini_fo_dentry(dentry);
++
++	if(exists_in_storage(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else
++		hidden_dentry = dtohd(dentry);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	if (hidden_dentry->d_inode->i_op->setxattr) {
++		encoded_name = (char *)name;
++		encoded_value = (char *)value;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_dentry->d_inode->i_sem);
++#endif
++		/* lock_kernel() already done by caller. */
++		err = hidden_dentry->d_inode->i_op->setxattr(hidden_dentry, encoded_name, encoded_value, size, flags);
++		/* unlock_kernel() will be done by caller. */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_dentry->d_inode->i_sem);
++#endif
++	}
++	return err;
++}
++
++/* BKL held by caller.
++ * dentry->d_inode->i_sem down
++ */
++STATIC int
++mini_fo_removexattr(struct dentry *dentry, const char *name) {
++	struct dentry *hidden_dentry = NULL;
++	int err = -EOPNOTSUPP;
++	char *encoded_name;
++
++	check_mini_fo_dentry(dentry);
++
++	if(exists_in_storage(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else
++		hidden_dentry = dtohd(dentry);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	if (hidden_dentry->d_inode->i_op->removexattr) {
++		encoded_name = (char *)name;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_dentry->d_inode->i_sem);
++#endif
++		/* lock_kernel() already done by caller. */
++		err = hidden_dentry->d_inode->i_op->removexattr(hidden_dentry, encoded_name);
++		/* unlock_kernel() will be done by caller. */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_dentry->d_inode->i_sem);
++#endif
++	}
++	return err;
++}
++
++/* BKL held by caller.
++ * dentry->d_inode->i_sem down
++ */
++STATIC int
++mini_fo_listxattr(struct dentry *dentry, char *list, size_t size) {
++	struct dentry *hidden_dentry = NULL;
++	int err = -EOPNOTSUPP;
++	char *encoded_list = NULL;
++
++	check_mini_fo_dentry(dentry);
++
++	if(exists_in_storage(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else
++		hidden_dentry = dtohd(dentry);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	if (hidden_dentry->d_inode->i_op->listxattr) {
++		encoded_list = list;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_dentry->d_inode->i_sem);
++#endif
++		/* lock_kernel() already done by caller. */
++		err = hidden_dentry->d_inode->i_op->listxattr(hidden_dentry, encoded_list, size);
++		/* unlock_kernel() will be done by caller. */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_dentry->d_inode->i_sem);
++#endif
++	}
++	return err;
++}
++# endif /* defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20)) */
++
++struct inode_operations mini_fo_symlink_iops =
++	{
++		readlink:	mini_fo_readlink,
++		follow_link: mini_fo_follow_link,
++		/* mk: permission:	mini_fo_permission, */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++		revalidate:	mini_fo_inode_revalidate,
++#endif
++		setattr:	mini_fo_setattr,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		getattr:	mini_fo_getattr,
++		put_link:       mini_fo_put_link,
++#endif
++
++#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20))
++		setxattr:	mini_fo_setxattr,
++		getxattr:	mini_fo_getxattr,
++		listxattr:	mini_fo_listxattr,
++		removexattr: mini_fo_removexattr
++# endif /* defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20)) */
++	};
++
++struct inode_operations mini_fo_dir_iops =
++	{
++		create:	mini_fo_create,
++		lookup:	mini_fo_lookup,
++		link:	mini_fo_link,
++		unlink:	mini_fo_unlink,
++		symlink:	mini_fo_symlink,
++		mkdir:	mini_fo_mkdir,
++		rmdir:	mini_fo_rmdir,
++		mknod:	mini_fo_mknod,
++		rename:	mini_fo_rename,
++		/* no readlink/follow_link for non-symlinks */
++		// off because we have setattr
++		//    truncate:	mini_fo_truncate,
++		/* mk:permission:	mini_fo_permission, */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++		revalidate:	mini_fo_inode_revalidate,
++#endif
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		getattr:	mini_fo_getattr,
++#endif
++		setattr:	mini_fo_setattr,
++#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20))
++		setxattr:	mini_fo_setxattr,
++		getxattr:	mini_fo_getxattr,
++		listxattr:	mini_fo_listxattr,
++		removexattr: mini_fo_removexattr
++# endif /* XATTR && LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20) */
++	};
++
++struct inode_operations mini_fo_main_iops =
++	{
++		/* permission:	mini_fo_permission, */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++		revalidate:	mini_fo_inode_revalidate,
++#endif
++		setattr:	mini_fo_setattr,
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		getattr:	mini_fo_getattr,
++#endif
++#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20))
++		setxattr:	mini_fo_setxattr,
++		getxattr:	mini_fo_getxattr,
++		listxattr:	mini_fo_listxattr,
++		removexattr:    mini_fo_removexattr
++# endif /* XATTR && LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20) */
++	};
+--- /dev/null
++++ b/fs/mini_fo/main.c
+@@ -0,0 +1,423 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++#include <linux/module.h>
++
++/* This definition must only appear after we include <linux/module.h> */
++#ifndef MODULE_LICENSE
++# define MODULE_LICENSE(bison)
++#endif /* not MODULE_LICENSE */
++
++/*
++ * This is the mini_fo tri interpose function, which extends the
++ * functionality of the regular interpose by interposing a higher
++ * level inode on top of two lower level ones: the base filesystem
++ * inode and the storage filesystem inode.
++ *
++ *  sb we pass is mini_fo's super_block
++ */
++int
++mini_fo_tri_interpose(dentry_t *hidden_dentry,
++		      dentry_t *hidden_sto_dentry,
++		      dentry_t *dentry, super_block_t *sb, int flag)
++{
++	inode_t *hidden_inode = NULL;
++	inode_t *hidden_sto_inode = NULL; /* store corresponding storage inode */
++	int err = 0;
++	inode_t *inode;
++
++	/* Pointer to hidden_sto_inode if exists, else to hidden_inode.
++	 * This is used to copy the attributes of the correct inode. */
++	inode_t *master_inode;
++
++	if(hidden_dentry)
++		hidden_inode = hidden_dentry->d_inode;
++	if(hidden_sto_dentry)
++		hidden_sto_inode = hidden_sto_dentry->d_inode;
++
++	ASSERT(dentry->d_inode == NULL);
++
++	/* mk: One of the inodes associated with the dentrys is likely to
++	 * be NULL, so carefull:
++	 */
++	ASSERT((hidden_inode != NULL) || (hidden_sto_inode != NULL));
++
++	if(hidden_sto_inode)
++		master_inode = hidden_sto_inode;
++	else
++		master_inode = hidden_inode;
++
++	/*
++	 * We allocate our new inode below, by calling iget.
++	 * iget will call our read_inode which will initialize some
++	 * of the new inode's fields
++	 */
++
++	/*
++	 * original: inode = iget(sb, hidden_inode->i_ino);
++	 */
++	inode = iget(sb, iunique(sb, 25));
++	if (!inode) {
++		err = -EACCES;		/* should be impossible??? */
++		goto out;
++	}
++
++	/*
++	 * interpose the inode if not already interposed
++	 *   this is possible if the inode is being reused
++	 * XXX: what happens if we get_empty_inode() but there's another already?
++	 * for now, ASSERT() that this can't happen; fix later.
++	 */
++	if (itohi(inode) != NULL) {
++		printk(KERN_CRIT "mini_fo_tri_interpose: itohi(inode) != NULL.\n");
++	}
++	if (itohi2(inode) != NULL) {
++		printk(KERN_CRIT "mini_fo_tri_interpose: itohi2(inode) != NULL.\n");
++	}
++
++	/* mk: Carefull, igrab can't handle NULL inodes (ok, why should it?), so
++	 * we need to check here:
++	 */
++	if(hidden_inode)
++		itohi(inode) = igrab(hidden_inode);
++	else
++		itohi(inode) = NULL;
++
++	if(hidden_sto_inode)
++		itohi2(inode) = igrab(hidden_sto_inode);
++	else
++		itohi2(inode) = NULL;
++
++
++	/* Use different set of inode ops for symlinks & directories*/
++	if (S_ISLNK(master_inode->i_mode))
++		inode->i_op = &mini_fo_symlink_iops;
++	else if (S_ISDIR(master_inode->i_mode))
++		inode->i_op = &mini_fo_dir_iops;
++
++	/* Use different set of file ops for directories */
++	if (S_ISDIR(master_inode->i_mode))
++		inode->i_fop = &mini_fo_dir_fops;
++
++	/* properly initialize special inodes */
++	if (S_ISBLK(master_inode->i_mode) || S_ISCHR(master_inode->i_mode) ||
++	    S_ISFIFO(master_inode->i_mode) || S_ISSOCK(master_inode->i_mode)) {
++		init_special_inode(inode, master_inode->i_mode, master_inode->i_rdev);
++	}
++
++	/* Fix our inode's address operations to that of the lower inode */
++	if (inode->i_mapping->a_ops != master_inode->i_mapping->a_ops) {
++		inode->i_mapping->a_ops = master_inode->i_mapping->a_ops;
++	}
++
++	/* only (our) lookup wants to do a d_add */
++	if (flag)
++		d_add(dentry, inode);
++	else
++		d_instantiate(dentry, inode);
++
++	ASSERT(dtopd(dentry) != NULL);
++
++	/* all well, copy inode attributes */
++	fist_copy_attr_all(inode, master_inode);
++
++ out:
++	return err;
++}
++
++/* parse mount options "base=" and "sto=" */
++dentry_t *
++mini_fo_parse_options(super_block_t *sb, char *options)
++{
++	dentry_t *hidden_root = ERR_PTR(-EINVAL);
++	dentry_t *hidden_root2 = ERR_PTR(-EINVAL);
++	struct nameidata nd, nd2;
++	char *name, *tmp, *end;
++	int err = 0;
++
++	/* We don't want to go off the end of our arguments later on. */
++	for (end = options; *end; end++);
++
++	while (options < end) {
++		tmp = options;
++		while (*tmp && *tmp != ',')
++			tmp++;
++		*tmp = '\0';
++		if (!strncmp("base=", options, 5)) {
++			name = options + 5;
++			printk(KERN_INFO "mini_fo: using base directory: %s\n", name);
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++			if (path_init(name, LOOKUP_FOLLOW, &nd))
++				err = path_walk(name, &nd);
++#else
++			err = path_lookup(name, LOOKUP_FOLLOW, &nd);
++#endif
++			if (err) {
++				printk(KERN_CRIT "mini_fo: error accessing hidden directory '%s'\n", name);
++				hidden_root = ERR_PTR(err);
++				goto out;
++			}
++			hidden_root = nd.dentry;
++			stopd(sb)->base_dir_dentry = nd.dentry;
++			stopd(sb)->hidden_mnt = nd.mnt;
++
++		} else if(!strncmp("sto=", options, 4)) {
++			/* parse the storage dir */
++			name = options + 4;
++			printk(KERN_INFO "mini_fo: using storage directory: %s\n", name);
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++			if(path_init(name, LOOKUP_FOLLOW, &nd2))
++				err = path_walk(name, &nd2);
++#else
++                        err = path_lookup(name, LOOKUP_FOLLOW, &nd2);
++#endif
++			if(err) {
++				printk(KERN_CRIT "mini_fo: error accessing hidden storage directory '%s'\n", name);
++
++				hidden_root2 = ERR_PTR(err);
++				goto out;
++			}
++			hidden_root2 = nd2.dentry;
++			stopd(sb)->storage_dir_dentry = nd2.dentry;
++			stopd(sb)->hidden_mnt2 = nd2.mnt;
++			stohs2(sb) = hidden_root2->d_sb;
++
++			/* validate storage dir, this is done in
++			 * mini_fo_read_super for the base directory.
++			 */
++			if (IS_ERR(hidden_root2)) {
++				printk(KERN_WARNING "mini_fo_parse_options: storage dentry lookup failed (err = %ld)\n", PTR_ERR(hidden_root2));
++				goto out;
++			}
++			if (!hidden_root2->d_inode) {
++				printk(KERN_WARNING "mini_fo_parse_options: no storage dir to interpose on.\n");
++				goto out;
++			}
++			stohs2(sb) = hidden_root2->d_sb;
++		} else {
++			printk(KERN_WARNING "mini_fo: unrecognized option '%s'\n", options);
++			hidden_root = ERR_PTR(-EINVAL);
++			goto out;
++		}
++		options = tmp + 1;
++	}
++
++ out:
++	if(IS_ERR(hidden_root2))
++		return hidden_root2;
++	return hidden_root;
++}
++
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++static int
++#else
++super_block_t *
++#endif
++mini_fo_read_super(super_block_t *sb, void *raw_data, int silent)
++{
++	dentry_t *hidden_root;
++	int err = 0;
++
++	if (!raw_data) {
++		printk(KERN_WARNING "mini_fo_read_super: missing argument\n");
++		err = -EINVAL;
++		goto out;
++	}
++	/*
++	 * Allocate superblock private data
++	 */
++	__stopd(sb) = kmalloc(sizeof(struct mini_fo_sb_info), GFP_KERNEL);
++	if (!stopd(sb)) {
++		printk(KERN_WARNING "%s: out of memory\n", __FUNCTION__);
++		err = -ENOMEM;
++		goto out;
++	}
++	stohs(sb) = NULL;
++
++	hidden_root = mini_fo_parse_options(sb, raw_data);
++	if (IS_ERR(hidden_root)) {
++		printk(KERN_WARNING "mini_fo_read_super: lookup_dentry failed (err = %ld)\n", PTR_ERR(hidden_root));
++		err = PTR_ERR(hidden_root);
++		goto out_free;
++	}
++	if (!hidden_root->d_inode) {
++		printk(KERN_WARNING "mini_fo_read_super: no directory to interpose on\n");
++		goto out_free;
++	}
++	stohs(sb) = hidden_root->d_sb;
++
++	/*
++	 * Linux 2.4.2-ac3 and beyond has code in
++	 * mm/filemap.c:generic_file_write() that requires sb->s_maxbytes
++	 * to be populated.  If not set, all write()s under that sb will
++	 * return 0.
++	 *
++	 * Linux 2.4.4+ automatically sets s_maxbytes to MAX_NON_LFS;
++	 * the filesystem should override it only if it supports LFS.
++	 */
++	/* non-SCA code is good to go with LFS */
++	sb->s_maxbytes = hidden_root->d_sb->s_maxbytes;
++
++	sb->s_op = &mini_fo_sops;
++	/*
++	 * we can't use d_alloc_root if we want to use
++	 * our own interpose function unchanged,
++	 * so we simply replicate *most* of the code in d_alloc_root here
++	 */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	sb->s_root = d_alloc(NULL, &(const struct qstr) { "/", 1, 0 });
++#else
++	sb->s_root = d_alloc(NULL, &(const struct qstr){hash: 0, name: "/", len : 1});
++#endif
++	if (IS_ERR(sb->s_root)) {
++		printk(KERN_WARNING "mini_fo_read_super: d_alloc failed\n");
++		err = -ENOMEM;
++		goto out_dput;
++	}
++
++	sb->s_root->d_op = &mini_fo_dops;
++	sb->s_root->d_sb = sb;
++	sb->s_root->d_parent = sb->s_root;
++
++	/* link the upper and lower dentries */
++	__dtopd(sb->s_root) = (struct mini_fo_dentry_info *)
++		kmalloc(sizeof(struct mini_fo_dentry_info), GFP_KERNEL);
++	if (!dtopd(sb->s_root)) {
++		err = -ENOMEM;
++		goto out_dput2;
++	}
++	dtopd(sb->s_root)->state = MODIFIED;
++	dtohd(sb->s_root) = hidden_root;
++
++	/* fanout relevant, interpose on storage root dentry too */
++	dtohd2(sb->s_root) = stopd(sb)->storage_dir_dentry;
++
++	/* ...and call tri-interpose to interpose root dir inodes
++	 * if (mini_fo_interpose(hidden_root, sb->s_root, sb, 0))
++	 */
++	if(mini_fo_tri_interpose(hidden_root, dtohd2(sb->s_root), sb->s_root, sb, 0))
++		goto out_dput2;
++
++	/* initalize the wol list */
++	itopd(sb->s_root->d_inode)->deleted_list_size = -1;
++	itopd(sb->s_root->d_inode)->renamed_list_size = -1;
++	meta_build_lists(sb->s_root);
++
++	goto out;
++
++ out_dput2:
++	dput(sb->s_root);
++ out_dput:
++	dput(hidden_root);
++	dput(dtohd2(sb->s_root)); /* release the hidden_sto_dentry too */
++ out_free:
++	kfree(stopd(sb));
++	__stopd(sb) = NULL;
++ out:
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++        return err;
++#else
++        if (err) {
++		return ERR_PTR(err);
++        } else {
++		return sb;
++        }
++#endif
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++static int mini_fo_get_sb(struct file_system_type *fs_type,
++					  int flags, const char *dev_name,
++					  void *raw_data, struct vfsmount *mnt)
++{
++	return get_sb_nodev(fs_type, flags, raw_data, mini_fo_read_super, mnt);
++}
++#else
++static struct super_block *mini_fo_get_sb(struct file_system_type *fs_type,
++					  int flags, const char *dev_name,
++					  void *raw_data)
++{
++	return get_sb_nodev(fs_type, flags, raw_data, mini_fo_read_super);
++}
++#endif
++
++void mini_fo_kill_block_super(struct super_block *sb)
++{
++	generic_shutdown_super(sb);
++	/*
++	 *      XXX: BUG: Halcrow: Things get unstable sometime after this point:
++	 *      lib/rwsem-spinlock.c:127: spin_is_locked on uninitialized
++	 *      fs/fs-writeback.c:402: spin_lock(fs/super.c:a0381828) already
++	 *      locked by fs/fs-writeback.c/402
++	 *
++	 *      Apparently, someone's not releasing a lock on sb_lock...
++	 */
++}
++
++static struct file_system_type mini_fo_fs_type = {
++	.owner          = THIS_MODULE,
++	.name           = "mini_fo",
++	.get_sb         = mini_fo_get_sb,
++	.kill_sb        = mini_fo_kill_block_super,
++	.fs_flags       = 0,
++};
++
++
++#else
++static DECLARE_FSTYPE(mini_fo_fs_type, "mini_fo", mini_fo_read_super, 0);
++#endif
++
++static int __init init_mini_fo_fs(void)
++{
++	printk("Registering mini_fo version $Id$\n");
++	return register_filesystem(&mini_fo_fs_type);
++}
++static void __exit exit_mini_fo_fs(void)
++{
++	printk("Unregistering mini_fo version $Id$\n");
++	unregister_filesystem(&mini_fo_fs_type);
++}
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++EXPORT_NO_SYMBOLS;
++#endif
++
++MODULE_AUTHOR("Erez Zadok <ezk@cs.sunysb.edu>");
++MODULE_DESCRIPTION("FiST-generated mini_fo filesystem");
++MODULE_LICENSE("GPL");
++
++/* MODULE_PARM(fist_debug_var, "i"); */
++/* MODULE_PARM_DESC(fist_debug_var, "Debug level"); */
++
++module_init(init_mini_fo_fs)
++module_exit(exit_mini_fo_fs)
+--- /dev/null
++++ b/fs/mini_fo/Makefile
+@@ -0,0 +1,17 @@
++#
++# Makefile for mini_fo 2.4 and 2.6 Linux kernels
++#
++# Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License
++# as published by the Free Software Foundation; either version
++# 2 of the License, or (at your option) any later version.
++#
++
++obj-$(CONFIG_MINI_FO) := mini_fo.o
++mini_fo-objs   := meta.o dentry.o file.o inode.o main.o super.o state.o aux.o
++
++# dependencies
++${mini_fo-objs}: mini_fo.h fist.h
++
+--- /dev/null
++++ b/fs/mini_fo/meta.c
+@@ -0,0 +1,1000 @@
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif /* HAVE_CONFIG_H */
++#include "fist.h"
++#include "mini_fo.h"
++
++int meta_build_lists(dentry_t *dentry)
++{
++	struct mini_fo_inode_info *inode_info;
++
++	dentry_t *meta_dentry = 0;
++	file_t *meta_file = 0;
++	mm_segment_t old_fs;
++	void *buf;
++
++	int bytes, len;
++	struct vfsmount *meta_mnt;
++	char *entry;
++
++	inode_info = itopd(dentry->d_inode);
++	if(!(inode_info->deleted_list_size == -1 &&
++	     inode_info->renamed_list_size == -1)) {
++		printk(KERN_CRIT "mini_fo: meta_build_lists: \
++                                  Error, list(s) not virgin.\n");
++		return -1;
++	}
++
++	/* init our meta lists */
++	INIT_LIST_HEAD(&inode_info->deleted_list);
++	inode_info->deleted_list_size = 0;
++
++	INIT_LIST_HEAD(&inode_info->renamed_list);
++	inode_info->renamed_list_size = 0;
++
++  	/* might there be a META-file? */
++	if(dtohd2(dentry) && dtohd2(dentry)->d_inode) {
++		meta_dentry = lookup_one_len(META_FILENAME,
++					     dtohd2(dentry),
++					     strlen(META_FILENAME));
++		if(!meta_dentry->d_inode) {
++			dput(meta_dentry);
++			goto out_ok;
++		}
++		/* $%& err, is this correct? */
++		meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++		mntget(meta_mnt);
++
++
++		/* open META-file for reading */
++		meta_file = dentry_open(meta_dentry, meta_mnt, 0x0);
++		if(!meta_file || IS_ERR(meta_file)) {
++			printk(KERN_CRIT "mini_fo: meta_build_lists: \
++                                          ERROR opening META file.\n");
++			goto out_err;
++		}
++
++		/* check if fs supports reading */
++		if(!meta_file->f_op->read) {
++			printk(KERN_CRIT "mini_fo: meta_build_lists: \
++                                          ERROR, fs does not support reading.\n");
++			goto out_err_close;
++		}
++
++		/* allocate a page for transfering the data */
++		buf = (void *) __get_free_page(GFP_KERNEL);
++		if(!buf) {
++			printk(KERN_CRIT "mini_fo: meta_build_lists: \
++                                          ERROR, out of mem.\n");
++			goto out_err_close;
++		}
++		meta_file->f_pos = 0;
++		old_fs = get_fs();
++		set_fs(KERNEL_DS);
++		do {
++			char *c;
++			bytes = meta_file->f_op->read(meta_file, buf, PAGE_SIZE, &meta_file->f_pos);
++			if(bytes == PAGE_SIZE) {
++				/* trim a cut off filename and adjust f_pos to get it next time */
++				for(c = (char*) buf+PAGE_SIZE;
++				    *c != '\n';
++				    c--, bytes--, meta_file->f_pos--);
++			}
++			entry = (char *) buf;
++			while(entry < (char *) buf+bytes) {
++
++				char *old_path;
++				char *dir_name;
++				int old_len, new_len;
++
++				/* len without '\n'*/
++				len = (int) (strchr(entry, '\n') - entry);
++				switch (*entry) {
++				case 'D':
++					/* format: "D filename" */
++					meta_list_add_d_entry(dentry,
++							      entry+2,
++							      len-2);
++					break;
++				case 'R':
++					/* format: "R path/xy/dir newDir" */
++					old_path = entry+2;
++					dir_name = strchr(old_path, ' ') + 1;
++					old_len =  dir_name - old_path - 1;
++					new_len = ((int) entry) + len - ((int ) dir_name);
++					meta_list_add_r_entry(dentry,
++							      old_path,
++							      old_len,
++							      dir_name,
++							      new_len);
++					break;
++				default:
++					/* unknown entry type detected */
++					break;
++				}
++				entry += len+1;
++			}
++
++		} while(meta_file->f_pos < meta_dentry->d_inode->i_size);
++
++		free_page((unsigned long) buf);
++		set_fs(old_fs);
++		fput(meta_file);
++	}
++	goto out_ok;
++
++ out_err_close:
++	fput(meta_file);
++ out_err:
++	mntput(meta_mnt);
++	dput(meta_dentry);
++	return -1;
++ out_ok:
++	return 1; /* check this!!! inode_info->wol_size; */
++}
++
++/* cleanups up all lists and free's the mem by dentry */
++int meta_put_lists(dentry_t *dentry)
++{
++	if(!dentry || !dentry->d_inode) {
++		printk("mini_fo: meta_put_lists: invalid dentry passed.\n");
++		return -1;
++	}
++	return __meta_put_lists(dentry->d_inode);
++}
++
++/* cleanups up all lists and free's the mem by inode */
++int __meta_put_lists(inode_t *inode)
++{
++	int err = 0;
++	if(!inode || !itopd(inode)) {
++		printk("mini_fo: __meta_put_lists: invalid inode passed.\n");
++		return -1;
++	}
++	err = __meta_put_d_list(inode);
++	err |= __meta_put_r_list(inode);
++	return err;
++}
++
++int meta_sync_lists(dentry_t *dentry)
++{
++	int err = 0;
++	if(!dentry || !dentry->d_inode) {
++		printk("mini_fo: meta_sync_lists: \
++                        invalid dentry passed.\n");
++		return -1;
++	}
++	err = meta_sync_d_list(dentry, 0);
++	err |= meta_sync_r_list(dentry, 1);
++	return err;
++}
++
++
++/* remove all D entries from the renamed list and free the mem */
++int __meta_put_d_list(inode_t *inode)
++{
++	struct list_head *tmp;
++        struct deleted_entry *del_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode)) {
++		printk(KERN_CRIT "mini_fo: __meta_put_d_list: \
++                                  invalid inode passed.\n");
++		return -1;
++	}
++	inode_info = itopd(inode);
++
++        /* nuke the DELETED-list */
++        if(inode_info->deleted_list_size <= 0)
++		return 0;
++
++	while(!list_empty(&inode_info->deleted_list)) {
++		tmp = inode_info->deleted_list.next;
++		list_del(tmp);
++		del_entry = list_entry(tmp, struct deleted_entry, list);
++		kfree(del_entry->name);
++		kfree(del_entry);
++	}
++	inode_info->deleted_list_size = 0;
++
++	return 0;
++}
++
++/* remove all R entries from the renamed list and free the mem */
++int __meta_put_r_list(inode_t *inode)
++{
++	struct list_head *tmp;
++	struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode)) {
++		printk(KERN_CRIT "mini_fo: meta_put_r_list: invalid inode.\n");
++		return -1;
++	}
++	inode_info = itopd(inode);
++
++        /* nuke the RENAMED-list */
++        if(inode_info->renamed_list_size <= 0)
++		return 0;
++
++	while(!list_empty(&inode_info->renamed_list)) {
++		tmp = inode_info->renamed_list.next;
++		list_del(tmp);
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		kfree(ren_entry->new_name);
++		kfree(ren_entry->old_name);
++		kfree(ren_entry);
++	}
++	inode_info->renamed_list_size = 0;
++
++	return 0;
++}
++
++int meta_add_d_entry(dentry_t *dentry, const char *name, int len)
++{
++	int err = 0;
++	err = meta_list_add_d_entry(dentry, name, len);
++	err |= meta_write_d_entry(dentry,name,len);
++	return err;
++}
++
++/* add a D entry to the deleted list */
++int meta_list_add_d_entry(dentry_t *dentry, const char *name, int len)
++{
++        struct deleted_entry *del_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_list_add_d_entry: \
++                                  invalid dentry passed.\n");
++		return -1;
++	}
++	inode_info = itopd(dentry->d_inode);
++
++        if(inode_info->deleted_list_size < 0)
++                return -1;
++
++        del_entry = (struct deleted_entry *)
++		kmalloc(sizeof(struct deleted_entry), GFP_KERNEL);
++        del_entry->name = (char*) kmalloc(len, GFP_KERNEL);
++        if(!del_entry || !del_entry->name) {
++                printk(KERN_CRIT "mini_fo: meta_list_add_d_entry: \
++                                  out of mem.\n");
++		kfree(del_entry->name);
++		kfree(del_entry);
++                return -ENOMEM;
++        }
++
++        strncpy(del_entry->name, name, len);
++        del_entry->len = len;
++
++        list_add(&del_entry->list, &inode_info->deleted_list);
++        inode_info->deleted_list_size++;
++        return 0;
++}
++
++int meta_add_r_entry(dentry_t *dentry,
++			  const char *old_name, int old_len,
++			  const char *new_name, int new_len)
++{
++	int err = 0;
++	err = meta_list_add_r_entry(dentry,
++				    old_name, old_len,
++				    new_name, new_len);
++	err |= meta_write_r_entry(dentry,
++				  old_name, old_len,
++				  new_name, new_len);
++	return err;
++}
++
++/* add a R entry to the renamed list */
++int meta_list_add_r_entry(dentry_t *dentry,
++			  const char *old_name, int old_len,
++			  const char *new_name, int new_len)
++{
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_list_add_r_entry: \
++                                  invalid dentry passed.\n");
++		return -1;
++	}
++	inode_info = itopd(dentry->d_inode);
++
++        if(inode_info->renamed_list_size < 0)
++                return -1;
++
++        ren_entry = (struct renamed_entry *)
++		kmalloc(sizeof(struct renamed_entry), GFP_KERNEL);
++        ren_entry->old_name = (char*) kmalloc(old_len, GFP_KERNEL);
++        ren_entry->new_name = (char*) kmalloc(new_len, GFP_KERNEL);
++
++        if(!ren_entry || !ren_entry->old_name || !ren_entry->new_name) {
++                printk(KERN_CRIT "mini_fo: meta_list_add_r_entry: \
++                                  out of mem.\n");
++		kfree(ren_entry->new_name);
++		kfree(ren_entry->old_name);
++		kfree(ren_entry);
++                return -ENOMEM;
++        }
++
++        strncpy(ren_entry->old_name, old_name, old_len);
++        ren_entry->old_len = old_len;
++        strncpy(ren_entry->new_name, new_name, new_len);
++        ren_entry->new_len = new_len;
++
++        list_add(&ren_entry->list, &inode_info->renamed_list);
++        inode_info->renamed_list_size++;
++        return 0;
++}
++
++
++int meta_remove_r_entry(dentry_t *dentry, const char *name, int len)
++{
++	int err = 0;
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT
++		       "mini_fo: meta_remove_r_entry: \
++                        invalid dentry passed.\n");
++		return -1;
++	}
++
++	err = meta_list_remove_r_entry(dentry, name, len);
++	err |= meta_sync_lists(dentry);
++	return err;
++}
++
++int meta_list_remove_r_entry(dentry_t *dentry, const char *name, int len)
++{
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT
++		       "mini_fo: meta_list_remove_r_entry: \
++                        invalid dentry passed.\n");
++		return -1;
++	}
++	return __meta_list_remove_r_entry(dentry->d_inode, name, len);
++}
++
++int __meta_list_remove_r_entry(inode_t *inode, const char *name, int len)
++{
++	struct list_head *tmp;
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode))
++		printk(KERN_CRIT
++		       "mini_fo: __meta_list_remove_r_entry: \
++                        invalid inode passed.\n");
++	inode_info = itopd(inode);
++
++        if(inode_info->renamed_list_size < 0)
++                return -1;
++        if(inode_info->renamed_list_size == 0)
++                return 1;
++
++	list_for_each(tmp, &inode_info->renamed_list) {
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		if(ren_entry->new_len != len)
++			continue;
++
++		if(!strncmp(ren_entry->new_name, name, len)) {
++			list_del(tmp);
++			kfree(ren_entry->new_name);
++			kfree(ren_entry->old_name);
++			kfree(ren_entry);
++			inode_info->renamed_list_size--;
++			return 0;
++		}
++	}
++	return 1;
++}
++
++
++/* append a single D entry to the meta file */
++int meta_write_d_entry(dentry_t *dentry, const char *name, int len)
++{
++	dentry_t *meta_dentry = 0;
++        file_t *meta_file = 0;
++        mm_segment_t old_fs;
++
++        int bytes, err;
++        struct vfsmount *meta_mnt = 0;
++        char *buf;
++
++	err = 0;
++
++	if(itopd(dentry->d_inode)->deleted_list_size < 0) {
++		err = -1;
++		goto out;
++	}
++
++	if(dtopd(dentry)->state == UNMODIFIED) {
++                err = build_sto_structure(dentry->d_parent, dentry);
++                if(err) {
++                        printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                          build_sto_structure failed.\n");
++			goto out;
++                }
++        }
++	meta_dentry = lookup_one_len(META_FILENAME,
++				     dtohd2(dentry), strlen (META_FILENAME));
++
++	/* We need to create a META-file */
++        if(!meta_dentry->d_inode) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry,
++			   S_IRUSR | S_IWUSR,
++			   NULL);
++#else
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry,
++			   S_IRUSR | S_IWUSR);
++#endif
++	}
++        /* open META-file for writing */
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        if(!meta_file || IS_ERR(meta_file)) {
++                printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                  ERROR opening meta file.\n");
++                mntput(meta_mnt); /* $%& is this necessary? */
++                dput(meta_dentry);
++		err = -1;
++                goto out;
++        }
++
++        /* check if fs supports writing */
++        if(!meta_file->f_op->write) {
++                printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                  ERROR, fs does not support writing.\n");
++                goto out_err_close;
++        }
++
++	meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */
++        old_fs = get_fs();
++        set_fs(KERNEL_DS);
++
++	/* size: len for name, 1 for \n and 2 for "D " */
++	buf = (char *) kmalloc(len+3, GFP_KERNEL);
++	if (!buf) {
++		printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                  out of mem.\n");
++		return -ENOMEM;
++	}
++
++	buf[0] = 'D';
++	buf[1] = ' ';
++	strncpy(buf+2, name, len);
++	buf[len+2] = '\n';
++	bytes = meta_file->f_op->write(meta_file, buf, len+3,
++				       &meta_file->f_pos);
++	if(bytes != len+3) {
++		printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                  ERROR writing.\n");
++		err = -1;
++	}
++	kfree(buf);
++	set_fs(old_fs);
++
++ out_err_close:
++	fput(meta_file);
++ out:
++	return err;
++}
++
++/* append a single R entry to the meta file */
++int meta_write_r_entry(dentry_t *dentry,
++		       const char *old_name, int old_len,
++		       const char *new_name, int new_len)
++{
++	dentry_t *meta_dentry = 0;
++        file_t *meta_file = 0;
++        mm_segment_t old_fs;
++
++        int bytes, err, buf_len;
++	struct vfsmount *meta_mnt = 0;
++        char *buf;
++
++
++	err = 0;
++
++	if(itopd(dentry->d_inode)->renamed_list_size < 0) {
++		err = -1;
++		goto out;
++	}
++
++	/* build the storage structure? */
++	if(dtopd(dentry)->state == UNMODIFIED) {
++                err = build_sto_structure(dentry->d_parent, dentry);
++                if(err) {
++                        printk(KERN_CRIT "mini_fo: meta_write_r_entry: \
++                                          build_sto_structure failed.\n");
++			goto out;
++                }
++        }
++	meta_dentry = lookup_one_len(META_FILENAME,
++				     dtohd2(dentry),
++				     strlen (META_FILENAME));
++        if(!meta_dentry->d_inode) {
++                /* We need to create a META-file */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR, NULL);
++#else
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR);
++#endif
++	}
++        /* open META-file for writing */
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        if(!meta_file || IS_ERR(meta_file)) {
++                printk(KERN_CRIT "mini_fo: meta_write_r_entry: \
++                                  ERROR opening meta file.\n");
++                mntput(meta_mnt);
++                dput(meta_dentry);
++		err = -1;
++                goto out;
++        }
++
++        /* check if fs supports writing */
++        if(!meta_file->f_op->write) {
++                printk(KERN_CRIT "mini_fo: meta_write_r_entry: \
++                                  ERROR, fs does not support writing.\n");
++                goto out_err_close;
++        }
++
++	meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */
++        old_fs = get_fs();
++        set_fs(KERNEL_DS);
++
++	/* size: 2 for "R ", old_len+new_len for names, 1 blank+1 \n */
++	buf_len = old_len + new_len + 4;
++	buf = (char *) kmalloc(buf_len, GFP_KERNEL);
++	if (!buf) {
++		printk(KERN_CRIT "mini_fo: meta_write_r_entry: out of mem.\n");
++		return -ENOMEM;
++	}
++
++	buf[0] = 'R';
++	buf[1] = ' ';
++	strncpy(buf + 2, old_name, old_len);
++	buf[old_len + 2] = ' ';
++	strncpy(buf + old_len + 3, new_name, new_len);
++	buf[buf_len -1] = '\n';
++	bytes = meta_file->f_op->write(meta_file, buf, buf_len, &meta_file->f_pos);
++	if(bytes != buf_len) {
++		printk(KERN_CRIT "mini_fo: meta_write_r_entry: ERROR writing.\n");
++		err = -1;
++	}
++
++	kfree(buf);
++	set_fs(old_fs);
++
++ out_err_close:
++	fput(meta_file);
++ out:
++	return err;
++}
++
++/* sync D list to disk, append data if app_flag is 1 */
++/* check the meta_mnt, which seems not to be used (properly)  */
++
++int meta_sync_d_list(dentry_t *dentry, int app_flag)
++{
++	dentry_t *meta_dentry;
++        file_t *meta_file;
++        mm_segment_t old_fs;
++
++        int bytes, err;
++        struct vfsmount *meta_mnt;
++        char *buf;
++
++	struct list_head *tmp;
++        struct deleted_entry *del_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	err = 0;
++	meta_file=0;
++	meta_mnt=0;
++
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                  invalid inode passed.\n");
++		err = -1;
++		goto out;
++	}
++	inode_info = itopd(dentry->d_inode);
++
++        if(inode_info->deleted_list_size < 0) {
++		err = -1;
++		goto out;
++	}
++
++	/* ok, there is something to sync */
++
++	/* build the storage structure? */
++        if(!dtohd2(dentry) && !itohi2(dentry->d_inode)) {
++                err = build_sto_structure(dentry->d_parent, dentry);
++                if(err) {
++                        printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                          build_sto_structure failed.\n");
++			goto out;
++                }
++        }
++	meta_dentry = lookup_one_len(META_FILENAME,
++				     dtohd2(dentry),
++				     strlen(META_FILENAME));
++        if(!meta_dentry->d_inode) {
++                /* We need to create a META-file */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR, NULL);
++#else
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR);
++#endif
++		app_flag = 0;
++	}
++	/* need we truncate the meta file? */
++	if(!app_flag) {
++		struct iattr newattrs;
++                newattrs.ia_size = 0;
++                newattrs.ia_valid = ATTR_SIZE | ATTR_CTIME;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&meta_dentry->d_inode->i_mutex);
++#else
++                down(&meta_dentry->d_inode->i_sem);
++#endif
++                err = notify_change(meta_dentry, &newattrs);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&meta_dentry->d_inode->i_mutex);
++#else
++                up(&meta_dentry->d_inode->i_sem);
++#endif
++
++                if(err || meta_dentry->d_inode->i_size != 0) {
++                        printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                          ERROR truncating meta file.\n");
++                        goto out_err_close;
++		}
++	}
++
++        /* open META-file for writing */
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        if(!meta_file || IS_ERR(meta_file)) {
++                printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                  ERROR opening meta file.\n");
++		/* we don't mntget so we dont't mntput (for now)
++		 * mntput(meta_mnt);
++		 */
++		dput(meta_dentry);
++		err = -1;
++                goto out;
++        }
++
++        /* check if fs supports writing */
++        if(!meta_file->f_op->write) {
++                printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                  ERROR, fs does not support writing.\n");
++                goto out_err_close;
++        }
++
++	meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */
++        old_fs = get_fs();
++        set_fs(KERNEL_DS);
++
++	/* here we go... */
++        list_for_each(tmp, &inode_info->deleted_list) {
++		del_entry = list_entry(tmp, struct deleted_entry, list);
++
++		/* size: len for name, 1 for \n and 2 for "D " */
++		buf = (char *) kmalloc(del_entry->len+3, GFP_KERNEL);
++		if (!buf) {
++			printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                          out of mem.\n");
++			return -ENOMEM;
++		}
++
++		buf[0] = 'D';
++		buf[1] = ' ';
++		strncpy(buf+2, del_entry->name, del_entry->len);
++		buf[del_entry->len+2] = '\n';
++		bytes = meta_file->f_op->write(meta_file, buf,
++					       del_entry->len+3,
++					       &meta_file->f_pos);
++		if(bytes != del_entry->len+3) {
++			printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                          ERROR writing.\n");
++			err |= -1;
++		}
++		kfree(buf);
++	}
++	set_fs(old_fs);
++
++ out_err_close:
++	fput(meta_file);
++ out:
++	return err;
++
++}
++
++int meta_sync_r_list(dentry_t *dentry, int app_flag)
++{
++	dentry_t *meta_dentry;
++        file_t *meta_file;
++        mm_segment_t old_fs;
++
++        int bytes, err, buf_len;
++        struct vfsmount *meta_mnt;
++        char *buf;
++
++	struct list_head *tmp;
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	err = 0;
++	meta_file=0;
++	meta_mnt=0;
++
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                  invalid dentry passed.\n");
++		err = -1;
++		goto out;
++	}
++	inode_info = itopd(dentry->d_inode);
++
++        if(inode_info->deleted_list_size < 0) {
++		err = -1;
++		goto out;
++	}
++
++	/* ok, there is something to sync */
++
++	/* build the storage structure? */
++        if(!dtohd2(dentry) && !itohi2(dentry->d_inode)) {
++                err = build_sto_structure(dentry->d_parent, dentry);
++                if(err) {
++                        printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                          build_sto_structure failed.\n");
++			goto out;
++                }
++        }
++	meta_dentry = lookup_one_len(META_FILENAME,
++				     dtohd2(dentry),
++				     strlen(META_FILENAME));
++        if(!meta_dentry->d_inode) {
++                /* We need to create a META-file */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR, NULL);
++#else
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR);
++#endif
++		app_flag = 0;
++	}
++	/* need we truncate the meta file? */
++	if(!app_flag) {
++		struct iattr newattrs;
++                newattrs.ia_size = 0;
++                newattrs.ia_valid = ATTR_SIZE | ATTR_CTIME;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&meta_dentry->d_inode->i_mutex);
++#else
++                down(&meta_dentry->d_inode->i_sem);
++#endif
++                err = notify_change(meta_dentry, &newattrs);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&meta_dentry->d_inode->i_mutex);
++#else
++                up(&meta_dentry->d_inode->i_sem);
++#endif
++                if(err || meta_dentry->d_inode->i_size != 0) {
++                        printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                          ERROR truncating meta file.\n");
++                        goto out_err_close;
++		}
++	}
++
++        /* open META-file for writing */
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        if(!meta_file || IS_ERR(meta_file)) {
++                printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                  ERROR opening meta file.\n");
++		/* we don't mntget so we dont't mntput (for now)
++		 * mntput(meta_mnt);
++		 */
++		dput(meta_dentry);
++		err = -1;
++                goto out;
++        }
++
++        /* check if fs supports writing */
++        if(!meta_file->f_op->write) {
++                printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                  ERROR, fs does not support writing.\n");
++                goto out_err_close;
++        }
++
++	meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */
++        old_fs = get_fs();
++        set_fs(KERNEL_DS);
++
++	/* here we go... */
++        list_for_each(tmp, &inode_info->renamed_list) {
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		/* size:
++		 * 2 for "R ", old_len+new_len for names, 1 blank+1 \n */
++		buf_len = ren_entry->old_len + ren_entry->new_len + 4;
++		buf = (char *) kmalloc(buf_len, GFP_KERNEL);
++		if (!buf) {
++			printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                          out of mem.\n");
++			return -ENOMEM;
++		}
++		buf[0] = 'R';
++		buf[1] = ' ';
++		strncpy(buf + 2, ren_entry->old_name, ren_entry->old_len);
++		buf[ren_entry->old_len + 2] = ' ';
++		strncpy(buf + ren_entry->old_len + 3,
++			ren_entry->new_name, ren_entry->new_len);
++		buf[buf_len - 1] = '\n';
++		bytes = meta_file->f_op->write(meta_file, buf,
++					       buf_len, &meta_file->f_pos);
++		if(bytes != buf_len) {
++			printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                          ERROR writing.\n");
++			err |= -1;
++		}
++		kfree(buf);
++	}
++	set_fs(old_fs);
++
++ out_err_close:
++	fput(meta_file);
++ out:
++	return err;
++}
++
++int meta_check_d_entry(dentry_t *dentry, const char *name, int len)
++{
++	if(!dentry || !dentry->d_inode)
++		printk(KERN_CRIT "mini_fo: meta_check_d_dentry: \
++                                  invalid dentry passed.\n");
++	return __meta_check_d_entry(dentry->d_inode, name, len);
++}
++
++int __meta_check_d_entry(inode_t *inode, const char *name, int len)
++{
++	struct list_head *tmp;
++        struct deleted_entry *del_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode))
++		printk(KERN_CRIT "mini_fo: __meta_check_d_dentry: \
++                                  invalid inode passed.\n");
++
++        inode_info = itopd(inode);
++
++        if(inode_info->deleted_list_size <= 0)
++                return 0;
++
++        list_for_each(tmp, &inode_info->deleted_list) {
++		del_entry = list_entry(tmp, struct deleted_entry, list);
++		if(del_entry->len != len)
++			continue;
++
++		if(!strncmp(del_entry->name, name, len))
++			return 1;
++	}
++	return 0;
++}
++
++/*
++ * check if file has been renamed and return path to orig. base dir.
++ * Implements no error return values so far, what of course sucks.
++ * String is null terminated.'
++ */
++char* meta_check_r_entry(dentry_t *dentry, const char *name, int len)
++{
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_check_r_dentry: \
++                                  invalid dentry passed.\n");
++		return NULL;
++	}
++	return __meta_check_r_entry(dentry->d_inode, name, len);
++}
++
++char* __meta_check_r_entry(inode_t *inode, const char *name, int len)
++{
++	struct list_head *tmp;
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++	char *old_path;
++
++	if(!inode || !itopd(inode)) {
++		printk(KERN_CRIT "mini_fo: meta_check_r_dentry: \
++                                  invalid inode passed.\n");
++		return NULL;
++	}
++	inode_info = itopd(inode);
++
++        if(inode_info->renamed_list_size <= 0)
++                return NULL;
++
++        list_for_each(tmp, &inode_info->renamed_list) {
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		if(ren_entry->new_len != len)
++			continue;
++
++		if(!strncmp(ren_entry->new_name, name, len)) {
++			old_path = (char *)
++				kmalloc(ren_entry->old_len+1, GFP_KERNEL);
++			strncpy(old_path,
++				ren_entry->old_name,
++				ren_entry->old_len);
++			old_path[ren_entry->old_len]='\0';
++			return old_path;
++		}
++	}
++	return NULL;
++}
++
++/*
++ * This version only checks if entry exists and return:
++ *     1 if exists,
++ *     0 if not,
++ *    -1 if error.
++ */
++int meta_is_r_entry(dentry_t *dentry, const char *name, int len)
++{
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_check_r_dentry [2]: \
++                                  invalid dentry passed.\n");
++		return -1;
++	}
++	return __meta_is_r_entry(dentry->d_inode, name, len);
++}
++
++int __meta_is_r_entry(inode_t *inode, const char *name, int len)
++{
++	struct list_head *tmp;
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode)) {
++		printk(KERN_CRIT "mini_fo: meta_check_r_dentry [2]: \
++                                  invalid inode passed.\n");
++		return -1;
++	}
++	inode_info = itopd(inode);
++
++        if(inode_info->renamed_list_size <= 0)
++                return -1;
++
++        list_for_each(tmp, &inode_info->renamed_list) {
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		if(ren_entry->new_len != len)
++			continue;
++
++		if(!strncmp(ren_entry->new_name, name, len))
++			return 1;
++	}
++	return 0;
++}
++
+--- /dev/null
++++ b/fs/mini_fo/mini_fo.h
+@@ -0,0 +1,510 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifndef __MINI_FO_H_
++#define __MINI_FO_H_
++
++#ifdef __KERNEL__
++
++/* META stuff */
++#define META_FILENAME "META_dAfFgHE39ktF3HD2sr"
++
++/* use xattrs? */
++#define XATTR
++
++/* File attributes that when changed, result in a file beeing copied to storage */
++#define COPY_FLAGS ATTR_MODE | ATTR_UID | ATTR_GID | ATTR_SIZE
++
++/*
++ * mini_fo filestates
++ */
++#define MODIFIED       1
++#define UNMODIFIED     2
++#define CREATED        3
++#define DEL_REWRITTEN  4
++#define DELETED        5
++#define NON_EXISTANT   6
++
++/* fist file systems superblock magic */
++# define MINI_FO_SUPER_MAGIC 0xf15f
++
++/*
++ * STRUCTURES:
++ */
++
++/* mini_fo inode data in memory */
++struct mini_fo_inode_info {
++	inode_t *wii_inode;
++	inode_t *wii_inode2; /* pointer to storage inode */
++
++	/* META-data lists */
++	/* deleted list, ex wol */
++	struct list_head deleted_list;
++	int deleted_list_size;
++
++	/* renamed list */
++	struct list_head renamed_list;
++	int renamed_list_size;
++
++	/* add other lists here ... */
++};
++
++/* mini_fo dentry data in memory */
++struct mini_fo_dentry_info {
++	dentry_t *wdi_dentry;
++	dentry_t *wdi_dentry2; /* pointer to  storage dentry */
++	unsigned int state;  /* state of the mini_fo dentry */
++};
++
++
++/* mini_fo super-block data in memory */
++struct mini_fo_sb_info {
++	super_block_t *wsi_sb, *wsi_sb2; /* mk: might point to the same sb */
++	struct vfsmount *hidden_mnt, *hidden_mnt2;
++	dentry_t *base_dir_dentry;
++	dentry_t *storage_dir_dentry;
++	;
++};
++
++/* readdir_data, readdir helper struct */
++struct readdir_data {
++	struct list_head ndl_list; /* linked list head ptr */
++	int ndl_size; /* list size */
++	int sto_done; /* flag to show that the storage dir entries have
++		       * all been read an now follow base entries */
++};
++
++/* file private data. */
++struct mini_fo_file_info {
++	struct file *wfi_file;
++	struct file *wfi_file2; /* pointer to storage file */
++	struct readdir_data rd;
++};
++
++/* struct ndl_entry */
++struct ndl_entry {
++	struct list_head list;
++	char *name;
++	int len;
++};
++
++/********************************
++ *  META-data structures
++ ********************************/
++
++/* deleted entry */
++struct deleted_entry {
++	struct list_head list;
++	char *name;
++	int len;
++};
++
++/* renamed entry */
++struct renamed_entry {
++	struct list_head list;
++	char *old_name;     /* old directory with full path */
++	int old_len;        /* length of above string */
++	char *new_name;     /* new directory name */
++	int new_len;        /* length of above string */
++};
++
++/* attr_change entry */
++struct attr_change_entry {
++	struct list_head list;
++	char *name;
++	int len;
++};
++
++/* link entry */
++struct link_entry {
++	struct list_head list;
++	int links_moved;
++	int inum_base;
++	int inum_sto;
++	char *weird_name;
++	int weird_name_len;
++};
++
++
++/* Some other stuff required for mini_fo_filldir64, copied from
++ * fs/readdir.c
++ */
++
++#define ROUND_UP64(x) (((x)+sizeof(u64)-1) & ~(sizeof(u64)-1))
++#define NAME_OFFSET(de) ((int) ((de)->d_name - (char *) (de)))
++
++
++struct linux_dirent64 {
++        u64             d_ino;
++        s64             d_off;
++        unsigned short  d_reclen;
++        unsigned char   d_type;
++        char            d_name[0];
++};
++
++
++struct getdents_callback64 {
++        struct linux_dirent64 * current_dir;
++        struct linux_dirent64 * previous;
++        int count;
++        int error;
++};
++
++struct linux_dirent {
++	unsigned long   d_ino;
++	unsigned long   d_off;
++	unsigned short  d_reclen;
++	char            d_name[1];
++};
++
++struct getdents_callback {
++	struct linux_dirent * current_dir;
++	struct linux_dirent * previous;
++	int count;
++	int error;
++};
++
++
++/*
++ * MACROS:
++ */
++
++/* file TO private_data */
++# define ftopd(file) ((struct mini_fo_file_info *)((file)->private_data))
++# define __ftopd(file) ((file)->private_data)
++/* file TO hidden_file */
++# define ftohf(file) ((ftopd(file))->wfi_file)
++# define ftohf2(file) ((ftopd(file))->wfi_file2)
++
++/* inode TO private_data */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++# define itopd(ino) ((struct mini_fo_inode_info *)(ino)->i_private)
++# define __itopd(ino) ((ino)->i_private)
++#else
++# define itopd(ino) ((struct mini_fo_inode_info *)(ino)->u.generic_ip)
++# define __itopd(ino) ((ino)->u.generic_ip)
++#endif
++/* inode TO hidden_inode */
++# define itohi(ino) (itopd(ino)->wii_inode)
++# define itohi2(ino) (itopd(ino)->wii_inode2)
++
++/* superblock TO private_data */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++# define stopd(super) ((struct mini_fo_sb_info *)(super)->s_fs_info)
++# define __stopd(super) ((super)->s_fs_info)
++#else
++# define stopd(super) ((struct mini_fo_sb_info *)(super)->u.generic_sbp)
++# define __stopd(super) ((super)->u.generic_sbp)
++#endif
++
++/* unused? # define vfs2priv stopd */
++/* superblock TO hidden_superblock */
++
++# define stohs(super) (stopd(super)->wsi_sb)
++# define stohs2(super) (stopd(super)->wsi_sb2)
++
++/* dentry TO private_data */
++# define dtopd(dentry) ((struct mini_fo_dentry_info *)(dentry)->d_fsdata)
++# define __dtopd(dentry) ((dentry)->d_fsdata)
++/* dentry TO hidden_dentry */
++# define dtohd(dent) (dtopd(dent)->wdi_dentry)
++# define dtohd2(dent) (dtopd(dent)->wdi_dentry2)
++
++/* dentry to state */
++# define dtost(dent) (dtopd(dent)->state)
++# define sbt(sb) ((sb)->s_type->name)
++
++#define IS_WRITE_FLAG(flag) (flag & (O_RDWR | O_WRONLY | O_APPEND))
++#define IS_COPY_FLAG(flag) (flag & (COPY_FLAGS))
++
++/* macros to simplify non-SCA code */
++#  define MALLOC_PAGE_POINTERS(hidden_pages, num_hidden_pages)
++#  define MALLOC_PAGEDATA_POINTERS(hidden_pages_data, num_hidden_pages)
++#  define FREE_PAGE_POINTERS(hidden_pages, num)
++#  define FREE_PAGEDATA_POINTERS(hidden_pages_data, num)
++#  define FOR_EACH_PAGE
++#  define CURRENT_HIDDEN_PAGE hidden_page
++#  define CURRENT_HIDDEN_PAGEDATA hidden_page_data
++#  define CURRENT_HIDDEN_PAGEINDEX page->index
++
++/*
++ * EXTERNALS:
++ */
++extern struct file_operations mini_fo_main_fops;
++extern struct file_operations mini_fo_dir_fops;
++extern struct inode_operations mini_fo_main_iops;
++extern struct inode_operations mini_fo_dir_iops;
++extern struct inode_operations mini_fo_symlink_iops;
++extern struct super_operations mini_fo_sops;
++extern struct dentry_operations mini_fo_dops;
++extern struct vm_operations_struct mini_fo_shared_vmops;
++extern struct vm_operations_struct mini_fo_private_vmops;
++extern struct address_space_operations mini_fo_aops;
++
++#if 0 /* unused by mini_fo */
++extern int mini_fo_interpose(dentry_t *hidden_dentry, dentry_t *this_dentry, super_block_t *sb, int flag);
++#if defined(FIST_FILTER_DATA) || defined(FIST_FILTER_SCA)
++extern page_t *mini_fo_get1page(file_t *file, int index);
++extern int mini_fo_fill_zeros(file_t *file, page_t *page, unsigned from);
++# endif /* FIST_FILTER_DATA || FIST_FILTER_SCA */
++
++
++#  define mini_fo_hidden_dentry(d) __mini_fo_hidden_dentry(__FILE__,__FUNCTION__,__LINE__,(d))
++#  define mini_fo_hidden_sto_dentry(d) __mini_fo_hidden_sto_dentry(__FILE__,__FUNCTION__,__LINE__,(d))
++
++extern dentry_t *__mini_fo_hidden_dentry(char *file, char *func, int line, dentry_t *this_dentry);
++extern dentry_t *__mini_fo_hidden_sto_dentry(char *file, char *func, int line, dentry_t *this_dentry);
++
++extern int mini_fo_read_file(const char *filename, void *buf, int len);
++extern int mini_fo_write_file(const char *filename, void *buf, int len);
++extern dentry_t *fist_lookup(dentry_t *dir, const char *name, vnode_t **out, uid_t uid, gid_t gid);
++#endif /* unused by mini_fo */
++
++/* state transition functions */
++extern int nondir_unmod_to_mod(dentry_t *dentry, int cp_flag);
++extern int nondir_del_rew_to_del(dentry_t *dentry);
++extern int nondir_creat_to_del(dentry_t *dentry);
++extern int nondir_mod_to_del(dentry_t *dentry);
++extern int nondir_unmod_to_del(dentry_t *dentry);
++
++extern int dir_unmod_to_mod(dentry_t *dentry);
++
++/* rename specials */
++extern int rename_directory(inode_t *old_dir, dentry_t *old_dentry, inode_t *new_dir, dentry_t *new_dentry);
++extern int rename_nondir(inode_t *old_dir, dentry_t *old_dentry, inode_t *new_dir, dentry_t *new_dentry);
++
++/* misc stuff */
++extern int mini_fo_tri_interpose(dentry_t *hidden_dentry,
++				 dentry_t *hidden_sto_dentry,
++				 dentry_t *dentry,
++				 super_block_t *sb, int flag);
++
++extern int mini_fo_cp_cont(dentry_t *tgt_dentry, struct vfsmount *tgt_mnt,
++			   dentry_t *src_dentry, struct vfsmount *src_mnt);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++extern int mini_fo_create(inode_t *dir, dentry_t *dentry, int mode, struct nameidata *nd);
++
++extern int create_sto_nod(dentry_t *dentry, int mode, dev_t dev);
++extern int create_sto_reg_file(dentry_t *dentry, int mode, struct nameidata *nd);
++#else
++extern int mini_fo_create(inode_t *dir, dentry_t *dentry, int mode);
++
++extern int create_sto_nod(dentry_t *dentry, int mode, int dev);
++extern int create_sto_reg_file(dentry_t *dentry, int mode);
++#endif
++
++extern int create_sto_dir(dentry_t *dentry, int mode);
++
++extern int exists_in_storage(dentry_t *dentry);
++extern int is_mini_fo_existant(dentry_t *dentry);
++extern int get_neg_sto_dentry(dentry_t *dentry);
++extern int build_sto_structure(dentry_t *dir, dentry_t *dentry);
++extern int get_mini_fo_bpath(dentry_t *dentry, char **bpath, int *bpath_len);
++extern dentry_t *bpath_walk(super_block_t *sb, char *bpath);
++extern int bpath_put(dentry_t *dentry);
++
++/* check_mini_fo types functions */
++extern int check_mini_fo_dentry(dentry_t *dentry);
++extern int check_mini_fo_file(file_t *file);
++extern int check_mini_fo_inode(inode_t *inode);
++
++/* General meta functions, can be called from outside of meta.c */
++extern int meta_build_lists(dentry_t *dentry);
++extern int meta_put_lists(dentry_t *dentry);
++extern int __meta_put_lists(inode_t *inode);
++
++extern int meta_add_d_entry(dentry_t *dentry, const char *name, int len);
++extern int meta_add_r_entry(dentry_t *dentry,
++			    const char *old_name, int old_len,
++			    const char *new_name, int new_len);
++
++extern int meta_remove_r_entry(dentry_t *dentry, const char *name, int len);
++
++extern int meta_check_d_entry(dentry_t *dentry, const char *name, int len);
++extern int __meta_check_d_entry(inode_t *inode, const char *name, int len);
++
++extern char* meta_check_r_entry(dentry_t *dentry, const char *name, int len);
++extern char* __meta_check_r_entry(inode_t *inode, const char *name, int len);
++extern int meta_is_r_entry(dentry_t *dentry, const char *name, int len);
++extern int __meta_is_r_entry(inode_t *inode, const char *name, int len);
++
++/* Specific meta functions, should be called only inside meta.c */
++extern int __meta_put_d_list(inode_t *inode);
++extern int __meta_put_r_list(inode_t *inode);
++
++extern int meta_list_add_d_entry(dentry_t *dentry,
++				 const char *name, int len);
++extern int meta_list_add_r_entry(dentry_t *dentry,
++				 const char *old_name, int old_len,
++				 const char *new_name, int new_len);
++
++extern int meta_list_remove_r_entry(dentry_t *dentry,
++				    const char *name, int len);
++
++extern int __meta_list_remove_r_entry(inode_t *inode,
++				      const char *name, int len);
++
++extern int meta_write_d_entry(dentry_t *dentry, const char *name, int len);
++extern int meta_write_r_entry(dentry_t *dentry,
++			      const char *old_name, int old_len,
++			      const char *new_name, int new_len);
++
++extern int meta_sync_lists(dentry_t *dentry);
++extern int meta_sync_d_list(dentry_t *dentry, int app_flag);
++extern int meta_sync_r_list(dentry_t *dentry, int app_flag);
++
++/* ndl stuff */
++extern int ndl_add_entry(struct readdir_data *rd, const char *name, int len);
++extern void ndl_put_list(struct readdir_data *rd);
++extern int ndl_check_entry(struct readdir_data *rd,
++			   const char *name, int len);
++
++
++# define copy_inode_size(dst, src) \
++    dst->i_size = src->i_size; \
++    dst->i_blocks = src->i_blocks;
++
++static inline void
++fist_copy_attr_atime(inode_t *dest, const inode_t *src)
++{
++	ASSERT(dest != NULL);
++	ASSERT(src != NULL);
++	dest->i_atime = src->i_atime;
++}
++static inline void
++fist_copy_attr_times(inode_t *dest, const inode_t *src)
++{
++	ASSERT(dest != NULL);
++	ASSERT(src != NULL);
++	dest->i_atime = src->i_atime;
++	dest->i_mtime = src->i_mtime;
++	dest->i_ctime = src->i_ctime;
++}
++static inline void
++fist_copy_attr_timesizes(inode_t *dest, const inode_t *src)
++{
++	ASSERT(dest != NULL);
++	ASSERT(src != NULL);
++	dest->i_atime = src->i_atime;
++	dest->i_mtime = src->i_mtime;
++	dest->i_ctime = src->i_ctime;
++	copy_inode_size(dest, src);
++}
++static inline void
++fist_copy_attr_all(inode_t *dest, const inode_t *src)
++{
++	ASSERT(dest != NULL);
++	ASSERT(src != NULL);
++	dest->i_mode = src->i_mode;
++	dest->i_nlink = src->i_nlink;
++	dest->i_uid = src->i_uid;
++	dest->i_gid = src->i_gid;
++	dest->i_rdev = src->i_rdev;
++	dest->i_atime = src->i_atime;
++	dest->i_mtime = src->i_mtime;
++	dest->i_ctime = src->i_ctime;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)
++	dest->i_blksize = src->i_blksize;
++#endif
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,12)
++	dest->i_blkbits = src->i_blkbits;
++# endif /* linux 2.4.12 and newer */
++	copy_inode_size(dest, src);
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	dest->i_attr_flags = src->i_attr_flags;
++#else
++	dest->i_flags = src->i_flags;
++#endif
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++/* copied from linux/fs.h */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++static inline void double_lock(struct dentry *d1, struct dentry *d2)
++{
++	struct mutex *m1 = &d1->d_inode->i_mutex;
++	struct mutex *m2 = &d2->d_inode->i_mutex;
++	if (m1 != m2) {
++		if ((unsigned long) m1 < (unsigned long) m2) {
++			struct mutex *tmp = m2;
++			m2 = m1; m1 = tmp;
++		}
++		mutex_lock(m1);
++	}
++	mutex_lock(m2);
++}
++
++static inline void double_unlock(struct dentry *d1, struct dentry *d2)
++{
++	struct mutex *m1 = &d1->d_inode->i_mutex;
++	struct mutex *m2 = &d2->d_inode->i_mutex;
++	mutex_unlock(m1);
++	if (m1 != m2)
++		mutex_unlock(m2);
++	dput(d1);
++	dput(d2);
++}
++
++#else
++static inline void double_down(struct semaphore *s1, struct semaphore *s2)
++{
++        if (s1 != s2) {
++                if ((unsigned long) s1 < (unsigned long) s2) {
++                        struct semaphore *tmp = s2;
++                        s2 = s1; s1 = tmp;
++                }
++                down(s1);
++        }
++        down(s2);
++}
++
++static inline void double_up(struct semaphore *s1, struct semaphore *s2)
++{
++        up(s1);
++        if (s1 != s2)
++                up(s2);
++}
++
++static inline void double_lock(struct dentry *d1, struct dentry *d2)
++{
++        double_down(&d1->d_inode->i_sem, &d2->d_inode->i_sem);
++}
++
++static inline void double_unlock(struct dentry *d1, struct dentry *d2)
++{
++        double_up(&d1->d_inode->i_sem,&d2->d_inode->i_sem);
++        dput(d1);
++        dput(d2);
++}
++#endif   /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) */
++#endif  /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) */
++#endif /* __KERNEL__ */
++
++/*
++ * Definitions for user and kernel code
++ */
++
++/* ioctls */
++
++#endif	/* not __MINI_FO_H_ */
+--- /dev/null
++++ b/fs/mini_fo/mini_fo-merge
+@@ -0,0 +1,180 @@
++#!/bin/bash
++#
++# Copyright (C) 2005 Markus Klotzbuecher <mk@creamnet.de>
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License
++# as published by the Free Software Foundation; either version
++# 2 of the License, or (at your option) any later version.
++#
++
++BASE=
++STO=
++HELP=
++DRYRUN=
++VERBOSE=
++TMP="/tmp/"
++META_NAME="META_dAfFgHE39ktF3HD2sr"
++SKIP_DEL_LIST="skip-delete-list.mini_fo-merge"
++
++COMMAND=
++exec_command()
++{
++    if [ x$DRYRUN == "xset" ]; then
++	echo "  would run: $COMMAND"
++    elif ! [ x$DRYRUN == "xset" ]; then
++	if [ x$VERBOSE == "xset" ]; then
++	    echo "  running: $COMMAND"
++	fi
++	eval $COMMAND
++    fi
++}
++
++usage()
++{
++cat <<EOF
++
++USAGE: $0 -b <base dir> -s <storage dir>
++Version 0.1
++
++This script merges the contents of a mini_fo storage file system back
++to the base file system.
++
++!!! Warning: This will modify the base filesystem and can destroy data
++             if used wrongly.
++
++Options:
++     -b <base dir>
++          the directory of the base file system.
++
++     -s <storage dir>
++          the directory of the storage file system.
++
++     -d   dry run, will not change anything and print the commands that
++          would be executed.
++
++     -t   tmp dir for storing temporary file. default: $TMP
++
++     -v   show what operations are performed.
++
++     -h   displays this message.
++
++EOF
++}
++
++# parse parameters
++while getopts hdvt:b:s: OPTS
++  do
++  case $OPTS in
++      h)  HELP="set";;
++      d)  DRYRUN="set";;
++      v)  VERBOSE="set";;
++      b)  BASE="$OPTARG";;
++      s)  STO="$OPTARG";;
++      t)  TMP="$OPTARG";;
++      ?)  usage
++	  exit 1;;
++  esac
++done
++
++if [ "x$HELP" == "xset" ]; then
++    usage
++    exit -1
++fi
++
++if ! [ -d "$BASE" ] || ! [ -d "$STO" ]; then
++    echo -e "$0:\n Error, -s and/or -b argument missing. type $0 -h for help."
++    exit -1;
++fi
++
++# get full paths
++pushd $STO; STO=`pwd`; popd
++pushd $BASE; BASE=`pwd`; popd
++TMP=${TMP%/}
++
++
++cat<<EOF
++###############################################################################
++# mini_fo-merge
++#
++# base dir:       $BASE
++# storage dir:    $STO
++# meta filename:  $META_NAME
++# dry run:        $DRYRUN
++# verbose:        $VERBOSE
++# tmp files:      $TMP
++###############################################################################
++
++EOF
++
++rm $TMP/$SKIP_DEL_LIST
++
++# first process all renamed dirs
++echo "Merging renamed directories..."
++pushd $STO &> /dev/null
++find . -name $META_NAME -type f -print0  | xargs -0 -e grep  -e '^R ' | tr -s ':R' ' ' | while read ENTRY; do
++    echo "entry: $ENTRY"
++    META_FILE=`echo $ENTRY | cut -d ' ' -f 1`
++    OLD_B_DIR=`echo $ENTRY | cut -d ' ' -f 2 | sed -e 's/\///'`
++    NEW_NAME=`echo $ENTRY | cut -d ' ' -f 3`
++    NEW_B_DIR=`echo $META_FILE | sed -e "s/$META_NAME/$NEW_NAME/" | sed -e 's/^\.\///'`
++    echo "META_FILE: $META_FILE"
++    echo "OLD_B_DIR: $OLD_B_DIR"
++    echo "NEW_NAME: $NEW_NAME"
++    echo  "NEW_B_DIR: $NEW_B_DIR"
++
++    pushd $BASE &> /dev/null
++    # remove an existing dir in storage
++    COMMAND="rm -rf $NEW_B_DIR"; exec_command
++    COMMAND="cp -R $OLD_B_DIR $NEW_B_DIR"; exec_command
++    echo ""
++    popd &> /dev/null
++
++    # remember this dir to exclude it from deleting later
++    echo $NEW_B_DIR >> $TMP/$SKIP_DEL_LIST
++done
++
++# delete all whiteouted files from base
++echo -e "\nDeleting whiteout'ed files from base file system..."
++find . -name $META_NAME -type f -print0  | xargs -0 -e grep  -e '^D ' | sed -e 's/:D//' | while read ENTRY; do
++    META_FILE=`echo $ENTRY | cut -d ' ' -f 1`
++    DEL_NAME=`echo $ENTRY | cut -d ' ' -f 2`
++    DEL_FILE=`echo $META_FILE | sed -e "s/$META_NAME/$DEL_NAME/" | sed -e 's/^\.\///'`
++    grep -x $DEL_FILE $TMP/$SKIP_DEL_LIST &> /dev/null
++    if [ $? -ne 0 ]; then
++	pushd $BASE &> /dev/null
++	COMMAND="rm -rf $DEL_FILE"; exec_command
++	popd &> /dev/null
++    else
++	echo "  excluding: $DEL_FILE as in skip-del-list."
++    fi
++done
++
++# create all dirs and update permissions
++echo -e "\nSetting up directory structures in base file system..."
++find . -type d | sed -e 's/^\.\///' | while read DIR; do
++    PERMS=`stat -c %a $DIR`
++    DIR_UID=`stat -c %u $DIR`
++    DIR_GID=`stat -c %g $DIR`
++    pushd $BASE &> /dev/null
++    if ! [ -d $DIR ]; then
++	COMMAND="mkdir -p $DIR"; exec_command
++    fi
++    COMMAND="chmod $PERMS $DIR"; exec_command
++    COMMAND="chown $DIR_UID:$DIR_GID $DIR"; exec_command
++    popd &> /dev/null
++done
++
++# merge all non-directory files
++echo -e "\nMerging all non-directory files...."
++for i in b c p f l s; do
++    find . -type $i | sed -e 's/^\.\///' | grep -v "$META_NAME" | while read FILE; do
++	pushd $BASE #&> /dev/null
++	COMMAND="cp -df $STO/$FILE $BASE/$FILE"; exec_command
++	popd &> /dev/null
++    done
++done
++popd &> /dev/null
++
++#rm $TMP/$SKIP_DEL_LIST
++
++echo "Done!"
+--- /dev/null
++++ b/fs/mini_fo/mini_fo-overlay
+@@ -0,0 +1,130 @@
++#!/bin/bash
++#
++# Copyright (C) 2005 Markus Klotzbuecher <mk@creamnet.de>
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License
++# as published by the Free Software Foundation; either version
++# 2 of the License, or (at your option) any later version.
++#
++
++HELP=
++SUFF=
++MNTP=
++MNT_DIR="/mnt"
++STO=
++STO_DIR="/tmp"
++BASE=
++
++usage()
++{
++cat <<EOF
++
++Usage: $0 [-s suffix] [-d sto_dir_dir] [-m mount point] base_dir
++Version 0.1
++
++This script overlays the given base directory using the mini_fo file
++system. If only the base directory base_dir is given, $0
++will use a storage directory called "sto-<base_dir_name>" in $STO_DIR,
++and mount point "mini_fo-<base_dir_dir>" in $MNT_DIR.
++
++Options:
++     -s <suffix>
++          add given suffix to storage directory and the mount
++          point. This is usefull for overlaying one base directory
++          several times and avoiding conflicts with storage directory
++          names and mount points.
++
++     -d <sto_dir_dir>
++          change the directory in which the storage directory will be
++          created (default is currently "$STO_DIR".
++
++     -m <mount point>
++          use an alternative directory to create the mini_fo
++          mountpoint (default is currently "$MNT_DIR".
++
++     -h   displays this message.
++
++EOF
++exit 1;
++}
++
++while getopts hm:s:d: OPTS
++  do
++  case $OPTS in
++      s)  SUFF="$OPTARG";;
++      d)  STO_DIR="$OPTARG";;
++      m)  MNT_DIR="$OPTARG";;
++      h)  HELP="set";;
++      ?)  usage
++	  exit 1;;
++  esac
++done
++shift $(($OPTIND - 1))
++
++BASE="$1"
++
++if [ "x$HELP" == "xset" ]; then
++    usage
++    exit -1
++fi
++
++# fix suffix
++if [ "x$SUFF" != "x" ]; then
++    SUFF="-$SUFF"
++fi
++
++# kill trailing slashes
++MNT_DIR=${MNT_DIR%/}
++STO_DIR=${STO_DIR%/}
++BASE=${BASE%/}
++
++
++if ! [ -d "$BASE" ]; then
++    echo "invalid base dir $BASE, run $0 -h for help."
++    exit -1
++fi
++
++# check opts
++if ! [ -d "$MNT_DIR" ]; then
++    echo "invalid mount dir $MNT_DIR, run $0 -h for help."
++    exit -1
++fi
++
++if ! [ -d "$STO_DIR" ]; then
++    echo "invalid sto_dir_dir $STO_DIR, run $0 -h for help."
++    exit -1
++fi
++
++MNTP="$MNT_DIR/mini_fo-`basename $BASE`$SUFF"
++STO="$STO_DIR/sto-`basename $BASE`$SUFF"
++
++# create the mount point if it doesn't exist
++mkdir -p $MNTP
++if [ $? -ne 0 ]; then
++    echo "Error, failed to create mount point $MNTP"
++fi
++
++mkdir -p $STO
++if [ $? -ne 0 ]; then
++    echo "Error, failed to create storage dir $STO"
++fi
++
++# check if fs is already mounted
++mount | grep mini_fo | grep $MNTP &> /dev/null
++if [ $? -eq 0 ]; then
++    echo "Error, existing mini_fo mount at $MNTP."
++    exit -1
++fi
++
++mount | grep mini_fo | grep $STO &> /dev/null
++if [ $? -eq 0 ]; then
++    echo "Error, $STO seems to be used already."
++    exit -1
++fi
++
++# mount
++mount -t mini_fo -o base=$BASE,sto=$STO $BASE $MNTP
++
++if [ $? -ne 0 ]; then
++    echo "Error, mounting failed, maybe no permisson to mount?"
++fi
+--- /dev/null
++++ b/fs/mini_fo/mmap.c
+@@ -0,0 +1,637 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif /* HAVE_CONFIG_H */
++
++#include "fist.h"
++#include "mini_fo.h"
++
++
++#ifdef FIST_COUNT_WRITES
++/* for counting writes in the middle vs. regular writes */
++unsigned long count_writes = 0, count_writes_middle = 0;
++#endif /* FIST_COUNT_WRITES */
++
++/* forward declaration of commit write and prepare write */
++STATIC int mini_fo_commit_write(file_t *file, page_t *page, unsigned from, unsigned to);
++STATIC int mini_fo_prepare_write(file_t *file, page_t *page, unsigned from, unsigned to);
++
++
++/*
++ * Function for handling creation of holes when lseek-ing past the
++ * end of the file and then writing some data.
++ */
++int
++mini_fo_fill_zeros(file_t* file, page_t *page, unsigned from)
++{
++	int err = 0;
++	dentry_t *dentry = file->f_dentry;
++	inode_t *inode = dentry->d_inode;
++	page_t *tmp_page;
++	int index;
++
++	print_entry_location();
++
++	for (index = inode->i_size >> PAGE_CACHE_SHIFT; index < page->index; index++) {
++		tmp_page = mini_fo_get1page(file, index);
++		if (IS_ERR(tmp_page)) {
++			err = PTR_ERR(tmp_page);
++			goto out;
++		}
++
++		/*
++		 * zero out rest of the contents of the page between the appropriate
++		 * offsets.
++		 */
++		memset((char*)page_address(tmp_page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, PAGE_CACHE_SIZE - (inode->i_size & ~PAGE_CACHE_MASK));
++
++		if (! (err = mini_fo_prepare_write(file, tmp_page, 0, PAGE_CACHE_SIZE)))
++			err = mini_fo_commit_write(file, tmp_page, 0, PAGE_CACHE_SIZE);
++
++		page_cache_release(tmp_page);
++		if (err < 0)
++			goto out;
++		if (current->need_resched)
++			schedule();
++	}
++
++	/* zero out appropriate parts of last page */
++
++	/*
++	 * if the encoding type is block, then adjust the 'from' (where the
++	 * zeroing will start) offset appropriately
++	 */
++	from = from & (~(FIST_ENCODING_BLOCKSIZE - 1));
++
++	if ((from - (inode->i_size & ~PAGE_CACHE_MASK)) > 0) {
++
++		memset((char*)page_address(page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, from - (inode->i_size & ~PAGE_CACHE_MASK));
++		if (! (err = mini_fo_prepare_write(file, page, 0, PAGE_CACHE_SIZE)))
++			err = mini_fo_commit_write(file, page, 0, PAGE_CACHE_SIZE);
++
++		if (err < 0)
++			goto out;
++		if (current->need_resched)
++			schedule();
++	}
++
++ out:
++	print_exit_status(err);
++	return err;
++}
++
++
++
++STATIC int
++mini_fo_writepage(page_t *page)
++{
++	int err = -EIO;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	page_t *hidden_page;
++	char *kaddr, *hidden_kaddr;
++
++	print_entry_location();
++
++	inode = page->mapping->host;
++	hidden_inode = itohi(inode);
++
++	/*
++	 * writepage is called when shared mmap'ed files need to write
++	 * their pages, while prepare/commit_write are called from the
++	 * non-paged write() interface.  (However, in 2.3 the two interfaces
++	 * share the same cache, while in 2.2 they didn't.)
++	 *
++	 * So we pretty much have to duplicate much of what commit_write does.
++	 */
++
++	/* find lower page (returns a locked page) */
++	hidden_page = grab_cache_page(hidden_inode->i_mapping, page->index);
++	if (!hidden_page)
++		goto out;
++
++	/* get page address, and encode it */
++	kaddr = (char *) kmap(page);
++	hidden_kaddr = (char*) kmap(hidden_page);
++	mini_fo_encode_block(kaddr, hidden_kaddr, PAGE_CACHE_SIZE, inode, inode->i_sb, page->index);
++	/* if encode_block could fail, then return error */
++	kunmap(page);
++	kunmap(hidden_page);
++
++	/* call lower writepage (expects locked page) */
++	err = hidden_inode->i_mapping->a_ops->writepage(hidden_page);
++
++	/*
++	 * update mtime and ctime of lower level file system
++	 * mini_fo' mtime and ctime are updated by generic_file_write
++	 */
++	hidden_inode->i_mtime = hidden_inode->i_ctime = CURRENT_TIME;
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,1)
++	UnlockPage(hidden_page);	/* b/c grab_cache_page locked it */
++# endif /* kernel older than 2.4.1 */
++	page_cache_release(hidden_page); /* b/c grab_cache_page increased refcnt */
++
++	if (err)
++		ClearPageUptodate(page);
++	else
++		SetPageUptodate(page);
++ out:
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,1)
++	UnlockPage(page);
++# endif /* kernel 2.4.1 and newer */
++	print_exit_status(err);
++	return err;
++}
++
++
++/*
++ * get one page from cache or lower f/s, return error otherwise.
++ * returns unlocked, up-to-date page (if ok), with increased refcnt.
++ */
++page_t *
++mini_fo_get1page(file_t *file, int index)
++{
++	page_t *page;
++	dentry_t *dentry;
++	inode_t *inode;
++	struct address_space *mapping;
++	int err;
++
++	print_entry_location();
++
++	dentry = file->f_dentry; /* CPW: Moved below print_entry_location */
++	inode = dentry->d_inode;
++	mapping = inode->i_mapping;
++
++	fist_dprint(8, "%s: read page index %d pid %d\n", __FUNCTION__, index, current->pid);
++	if (index < 0) {
++		printk("%s BUG: index=%d\n", __FUNCTION__, index);
++		page = ERR_PTR(-EIO);
++		goto out;
++	}
++	page = read_cache_page(mapping,
++			       index,
++			       (filler_t *) mapping->a_ops->readpage,
++			       (void *) file);
++	if (IS_ERR(page))
++		goto out;
++	wait_on_page(page);
++	if (!Page_Uptodate(page)) {
++		lock_page(page);
++		err = mapping->a_ops->readpage(file, page);
++		if (err) {
++			page = ERR_PTR(err);
++			goto out;
++		}
++		wait_on_page(page);
++		if (!Page_Uptodate(page)) {
++			page = ERR_PTR(-EIO);
++			goto out;
++		}
++	}
++
++ out:
++	print_exit_pointer(page);
++	return page;
++}
++
++
++/*
++ * get one page from cache or lower f/s, return error otherwise.
++ * similar to get1page, but doesn't guarantee that it will return
++ * an unlocked page.
++ */
++page_t *
++mini_fo_get1page_cached(file_t *file, int index)
++{
++	page_t *page;
++	dentry_t *dentry;
++	inode_t *inode;
++	struct address_space *mapping;
++	int err;
++
++	print_entry_location();
++
++	dentry = file->f_dentry; /* CPW: Moved below print_entry_location */
++	inode = dentry->d_inode;
++	mapping = inode->i_mapping;
++
++	fist_dprint(8, "%s: read page index %d pid %d\n", __FUNCTION__, index, current->pid);
++	if (index < 0) {
++		printk("%s BUG: index=%d\n", __FUNCTION__, index);
++		page = ERR_PTR(-EIO);
++		goto out;
++	}
++	page = read_cache_page(mapping,
++			       index,
++			       (filler_t *) mapping->a_ops->readpage,
++			       (void *) file);
++	if (IS_ERR(page))
++		goto out;
++
++ out:
++	print_exit_pointer(page);
++	return page;
++}
++
++
++/*
++ * readpage is called from generic_page_read and the fault handler.
++ * If your file system uses generic_page_read for the read op, it
++ * must implement readpage.
++ *
++ * Readpage expects a locked page, and must unlock it.
++ */
++STATIC int
++mini_fo_do_readpage(file_t *file, page_t *page)
++{
++	int err = -EIO;
++	dentry_t *dentry;
++	file_t *hidden_file = NULL;
++	dentry_t *hidden_dentry;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	char *page_data;
++	page_t *hidden_page;
++	char *hidden_page_data;
++	int real_size;
++
++	print_entry_location();
++
++	dentry = file->f_dentry; /* CPW: Moved below print_entry_location */
++	if (ftopd(file) != NULL)
++		hidden_file = ftohf(file);
++	hidden_dentry = dtohd(dentry);
++	inode = dentry->d_inode;
++	hidden_inode = itohi(inode);
++
++	fist_dprint(7, "%s: requesting page %d from file %s\n", __FUNCTION__, page->index, dentry->d_name.name);
++
++	MALLOC_PAGE_POINTERS(hidden_pages, num_hidden_pages);
++	MALLOC_PAGEDATA_POINTERS(hidden_pages_data, num_hidden_pages);
++	FOR_EACH_PAGE
++		CURRENT_HIDDEN_PAGE = NULL;
++
++	/* find lower page (returns a locked page) */
++	FOR_EACH_PAGE {
++		fist_dprint(8, "%s: Current page index = %d\n", __FUNCTION__, CURRENT_HIDDEN_PAGEINDEX);
++		CURRENT_HIDDEN_PAGE = read_cache_page(hidden_inode->i_mapping,
++						      CURRENT_HIDDEN_PAGEINDEX,
++						      (filler_t *) hidden_inode->i_mapping->a_ops->readpage,
++						      (void *) hidden_file);
++		if (IS_ERR(CURRENT_HIDDEN_PAGE)) {
++			err = PTR_ERR(CURRENT_HIDDEN_PAGE);
++			CURRENT_HIDDEN_PAGE = NULL;
++			goto out_release;
++		}
++	}
++
++	/*
++	 * wait for the page data to show up
++	 * (signaled by readpage as unlocking the page)
++	 */
++	FOR_EACH_PAGE {
++		wait_on_page(CURRENT_HIDDEN_PAGE);
++		if (!Page_Uptodate(CURRENT_HIDDEN_PAGE)) {
++			/*
++			 * call readpage() again if we returned from wait_on_page with a
++			 * page that's not up-to-date; that can happen when a partial
++			 * page has a few buffers which are ok, but not the whole
++			 * page.
++			 */
++			lock_page(CURRENT_HIDDEN_PAGE);
++			err = hidden_inode->i_mapping->a_ops->readpage(hidden_file,
++								       CURRENT_HIDDEN_PAGE);
++			if (err) {
++				CURRENT_HIDDEN_PAGE = NULL;
++				goto out_release;
++			}
++			wait_on_page(CURRENT_HIDDEN_PAGE);
++			if (!Page_Uptodate(CURRENT_HIDDEN_PAGE)) {
++				err = -EIO;
++				goto out_release;
++			}
++		}
++	}
++
++	/* map pages, get their addresses */
++	page_data = (char *) kmap(page);
++	FOR_EACH_PAGE
++		CURRENT_HIDDEN_PAGEDATA = (char *) kmap(CURRENT_HIDDEN_PAGE);
++
++	/* if decode_block could fail, then return error */
++	err = 0;
++	real_size = hidden_inode->i_size - (page->index << PAGE_CACHE_SHIFT);
++	if (real_size <= 0)
++		memset(page_data, 0, PAGE_CACHE_SIZE);
++	else if (real_size < PAGE_CACHE_SIZE) {
++		mini_fo_decode_block(hidden_page_data, page_data, real_size, inode, inode->i_sb, page->index);
++		memset(page_data + real_size, 0, PAGE_CACHE_SIZE - real_size);
++	} else
++		mini_fo_decode_block(hidden_page_data, page_data, PAGE_CACHE_SIZE, inode, inode->i_sb, page->index);
++
++	FOR_EACH_PAGE
++		kunmap(CURRENT_HIDDEN_PAGE);
++	kunmap(page);
++
++ out_release:
++	FOR_EACH_PAGE
++		if (CURRENT_HIDDEN_PAGE)
++			page_cache_release(CURRENT_HIDDEN_PAGE); /* undo read_cache_page */
++
++	FREE_PAGE_POINTERS(hidden_pages, num_hidden_pages);
++	FREE_PAGEDATA_POINTERS(hidden_pages_data, num_hidden_pages);
++
++ out:
++	if (err == 0)
++		SetPageUptodate(page);
++	else
++		ClearPageUptodate(page);
++
++	print_exit_status(err);
++	return err;
++}
++
++
++STATIC int
++mini_fo_readpage(file_t *file, page_t *page)
++{
++	int err;
++	print_entry_location();
++
++	err = mini_fo_do_readpage(file, page);
++
++	/*
++	 * we have to unlock our page, b/c we _might_ have gotten a locked page.
++	 * but we no longer have to wakeup on our page here, b/c UnlockPage does
++	 * it
++	 */
++	UnlockPage(page);
++
++	print_exit_status(err);
++	return err;
++}
++
++
++STATIC int
++mini_fo_prepare_write(file_t *file, page_t *page, unsigned from, unsigned to)
++{
++	int err = 0;
++
++	print_entry_location();
++
++	/*
++	 * we call kmap(page) only here, and do the kunmap
++	 * and the actual downcalls, including unlockpage and uncache
++	 * in commit_write.
++	 */
++	kmap(page);
++
++	/* fast path for whole page writes */
++	if (from == 0 && to == PAGE_CACHE_SIZE)
++		goto out;
++	/* read the page to "revalidate" our data */
++	/* call the helper function which doesn't unlock the page */
++	if (!Page_Uptodate(page))
++		err = mini_fo_do_readpage(file, page);
++
++ out:
++	print_exit_status(err);
++	return err;
++}
++
++
++
++STATIC int
++mini_fo_commit_write(file_t *file, page_t *page, unsigned from, unsigned to)
++{
++	int err = -ENOMEM;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	page_t *hidden_page;
++	file_t *hidden_file = NULL;
++	loff_t pos;
++	unsigned bytes = to - from;
++	unsigned hidden_from, hidden_to, hidden_bytes;
++
++	print_entry_location();
++
++	inode = page->mapping->host; /* CPW: Moved below print_entry_location */
++	hidden_inode = itohi(inode);
++
++	ASSERT(file != NULL);
++	/*
++	 * here we have a kmapped page, with data from the user copied
++	 * into it.  we need to encode_block it, and then call the lower
++	 * commit_write.  We also need to simulate same behavior of
++	 * generic_file_write, and call prepare_write on the lower f/s first.
++	 */
++#ifdef FIST_COUNT_WRITES
++	count_writes++;
++# endif /* FIST_COUNT_WRITES */
++
++	/* this is append and/or extend -- we can't have holes so fill them in */
++	if (page->index > (hidden_inode->i_size >> PAGE_CACHE_SHIFT)) {
++		page_t *tmp_page;
++		int index;
++		for (index = hidden_inode->i_size >> PAGE_CACHE_SHIFT; index < page->index; index++) {
++			tmp_page = mini_fo_get1page(file, index);
++			if (IS_ERR(tmp_page)) {
++				err = PTR_ERR(tmp_page);
++				goto out;
++			}
++			/* zero out the contents of the page at the appropriate offsets */
++			memset((char*)page_address(tmp_page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, PAGE_CACHE_SIZE - (inode->i_size & ~PAGE_CACHE_MASK));
++			if (!(err = mini_fo_prepare_write(file, tmp_page, 0, PAGE_CACHE_SIZE)))
++				err = mini_fo_commit_write(file, tmp_page, 0, PAGE_CACHE_SIZE);
++			page_cache_release(tmp_page);
++			if (err < 0)
++				goto out;
++			if (current->need_resched)
++				schedule();
++		}
++	}
++
++	if (ftopd(file) != NULL)
++		hidden_file = ftohf(file);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_inode->i_mutex);
++#else
++	down(&hidden_inode->i_sem);
++#endif
++	/* find lower page (returns a locked page) */
++	hidden_page = grab_cache_page(hidden_inode->i_mapping, page->index);
++	if (!hidden_page)
++		goto out;
++
++#if FIST_ENCODING_BLOCKSIZE > 1
++#  error encoding_blocksize greater than 1 is not yet supported
++# endif /* FIST_ENCODING_BLOCKSIZE > 1 */
++
++	hidden_from = from & (~(FIST_ENCODING_BLOCKSIZE - 1));
++	hidden_to = ((to + FIST_ENCODING_BLOCKSIZE - 1) & (~(FIST_ENCODING_BLOCKSIZE - 1)));
++	if ((page->index << PAGE_CACHE_SHIFT) + to > hidden_inode->i_size) {
++
++		/*
++		 * if this call to commit_write had introduced holes and the code
++		 * for handling holes was invoked, then the beginning of this page
++		 * must be zeroed out
++		 * zero out bytes from 'size_of_file%pagesize' to 'from'.
++		 */
++		if ((hidden_from - (inode->i_size & ~PAGE_CACHE_MASK)) > 0)
++			memset((char*)page_address(page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, hidden_from - (inode->i_size & ~PAGE_CACHE_MASK));
++
++	}
++	hidden_bytes = hidden_to - hidden_from;
++
++	/* call lower prepare_write */
++	err = -EINVAL;
++	if (hidden_inode->i_mapping &&
++	    hidden_inode->i_mapping->a_ops &&
++	    hidden_inode->i_mapping->a_ops->prepare_write)
++		err = hidden_inode->i_mapping->a_ops->prepare_write(hidden_file,
++								    hidden_page,
++								    hidden_from,
++								    hidden_to);
++	if (err)
++		/* don't leave locked pages behind, esp. on an ENOSPC */
++		goto out_unlock;
++
++	fist_dprint(8, "%s: encoding %d bytes\n", __FUNCTION__, hidden_bytes);
++	mini_fo_encode_block((char *) page_address(page) + hidden_from, (char*) page_address(hidden_page) + hidden_from, hidden_bytes, inode, inode->i_sb, page->index);
++	/* if encode_block could fail, then goto unlock and return error */
++
++	/* call lower commit_write */
++	err = hidden_inode->i_mapping->a_ops->commit_write(hidden_file,
++							   hidden_page,
++							   hidden_from,
++							   hidden_to);
++
++	if (err < 0)
++		goto out_unlock;
++
++	err = bytes;	/* convert error to no. of bytes */
++
++	inode->i_blocks = hidden_inode->i_blocks;
++	/* we may have to update i_size */
++	pos = (page->index << PAGE_CACHE_SHIFT) + to;
++	if (pos > inode->i_size)
++		inode->i_size = pos;
++
++	/*
++	 * update mtime and ctime of lower level file system
++	 * mini_fo' mtime and ctime are updated by generic_file_write
++	 */
++	hidden_inode->i_mtime = hidden_inode->i_ctime = CURRENT_TIME;
++
++	mark_inode_dirty_sync(inode);
++
++ out_unlock:
++	UnlockPage(hidden_page);
++	page_cache_release(hidden_page);
++	kunmap(page);		/* kmap was done in prepare_write */
++ out:
++	/* we must set our page as up-to-date */
++	if (err < 0)
++		ClearPageUptodate(page);
++	else
++		SetPageUptodate(page);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_inode->i_mutex);
++#else
++	up(&hidden_inode->i_sem);
++#endif
++	print_exit_status(err);
++	return err;			/* assume all is ok */
++}
++
++
++STATIC int
++mini_fo_bmap(struct address_space *mapping, long block)
++{
++	int err = 0;
++	inode_t *inode;
++	inode_t *hidden_inode;
++
++	print_entry_location();
++
++	inode = (inode_t *) mapping->host;
++	hidden_inode = itohi(inode);
++
++	if (hidden_inode->i_mapping->a_ops->bmap)
++		err = hidden_inode->i_mapping->a_ops->bmap(hidden_inode->i_mapping, block);
++	print_exit_location();
++	return err;
++}
++
++
++/*
++ * This function is copied verbatim from mm/filemap.c.
++ * XXX: It should be simply moved to some header file instead -- bug Al about it!
++ */
++static inline int sync_page(struct page *page)
++{
++	struct address_space *mapping = page->mapping;
++
++	if (mapping && mapping->a_ops && mapping->a_ops->sync_page)
++		return mapping->a_ops->sync_page(page);
++	return 0;
++}
++
++
++/*
++ * XXX: we may not need this function if not FIST_FILTER_DATA.
++ * FIXME: for FIST_FILTER_SCA, get all lower pages and sync them each.
++ */
++STATIC int
++mini_fo_sync_page(page_t *page)
++{
++	int err = 0;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	page_t *hidden_page;
++
++	print_entry_location();
++
++	inode = page->mapping->host; /* CPW: Moved below print_entry_location */
++	hidden_inode = itohi(inode);
++
++	/* find lower page (returns a locked page) */
++	hidden_page = grab_cache_page(hidden_inode->i_mapping, page->index);
++	if (!hidden_page)
++		goto out;
++
++	err = sync_page(hidden_page);
++
++	UnlockPage(hidden_page);	/* b/c grab_cache_page locked it */
++	page_cache_release(hidden_page); /* b/c grab_cache_page increased refcnt */
++
++ out:
++	print_exit_status(err);
++	return err;
++}
+--- /dev/null
++++ b/fs/mini_fo/README
+@@ -0,0 +1,163 @@
++README for the mini_fo overlay file system
++=========================================
++
++
++WHAT IS MINI_FO?
++----------------
++
++mini_fo is a virtual kernel file system that can make read-only
++file systems writable. This is done by redirecting modifying operations
++to a writeable location called "storage directory", and leaving the
++original data in the "base directory" untouched. When reading, the
++file system merges the modifed and original data so that only the
++newest versions will appear. This occurs transparently to the user,
++who can access the data like on any other read-write file system.
++
++Base and storage directories may be located on the same or on
++different partitions and may be of different file system types. While
++the storage directory obviously needs to be writable, the base may or
++may not be writable, what doesn't matter as it will no be modified
++anyway.
++
++
++WHAT IS GOOD FOR?
++-----------------
++
++The primary purpose of the mini_fo file system is to allow easy
++software updates to embedded systems, that often store their root
++file system in a read-only flash file system, but there are many
++more as for example sandboxing, or for allowing live-cds to
++permanently store information.
++
++
++BUILDING
++--------
++This should be simple. Adjust the Makefile to point to the correct
++kernel headers you want to build the module for. Then:
++
++    # make
++
++should build "mini_fo.o" for a 2.4 kernel or "mini_fo.ko" for a 2.6
++kernel.
++
++If you are building the module for you current kernel, you can install
++the module (as root):
++
++    # make install
++
++or uninstall with
++
++    # make uninstall
++
++
++USING THE FILE SYSTEM
++--------------------
++
++the general mount syntax is:
++
++   mount -t mini_fo -o base=<base directory>,sto=<storage directory>\
++                            <base directory> <mount point>
++
++Example:
++
++You have mounted a cdrom to /mnt/cdrom and want to modifiy some files
++on it:
++
++load the module (as root)
++
++    # insmod mini_fo.o for a 2.4 kernel or
++
++    # insmod mini_fo.ko for a 2.6 kernel
++
++
++create a storage dir in tmp and a mountpoint for mini_fo:
++
++    # mkdir /tmp/sto
++    # mkdir /mnt/mini_fo
++
++and mount the mini_fo file system:
++
++    # mount -t mini_fo -o base=/mnt/cdrom,sto=/tmp/sto /mnt/cdrom /mnt/mini_fo
++
++
++Now the data stored on the cd can be accessed via the mini_fo
++mountpoint just like any read-write file system, files can be modified
++and deleted, new ones can be created and so on. When done unmount the
++file system:
++
++    # unmount /mnt/mini_fo
++
++Note that if the file system is mounted again using the same storage
++file system, of course it will appear in the modified state again. If
++you remount it using an new empty storage directory, it will be
++unmodified. Therefore by executing:
++
++    # cd /tmp/sto
++    # rm -rf *
++
++you can nuke all the changes you made to the original file system. But
++ remember NEVER do this while the mini_fo file system is mounted!
++
++
++Alternatively you can use the mini_fo-overlay bash script, that
++simplifies managing mini_fo mounts. See TOOLS Section.
++
++
++TOOLS
++-----
++
++mini_fo-merge (experimental):
++
++This is a bash script that will merge changes contained in the storage
++directory back to the base directory. This allows mini_fo to function
++as a cache file system by overlaying a slow (network, ...) file system
++and using a fast (ramdisk, ...) as storage. When done, changes can be
++merged back to the (slow) base with mini_fo-merge. See "mini_fo-merge
++-h" for details.
++
++It can be usefull for merging changes back after a successfull test
++(patches, software updates...)
++
++
++mini_fo-overlay:
++
++This bash script simplifies managing one or more mini_fo mounts. For
++overlaying a directory called "basedir1", you can just call:
++
++    # mini_fo-overlay basedir1
++
++This will mount mini_fo with "basedir1" as base, "/tmp/sto-basedir1/"
++as storage to "/mnt/mini_fo-basedir1/". It has more options though,
++type "mini_fo-overlay -h" for details.
++
++
++DOCUMENTATION, REPORTING BUGS, GETTING HELP
++-------------------------------------------
++
++Please visit the mini_fo project page at:
++
++http://www.denx.de/twiki/bin/view/Know/MiniFOHome
++
++
++WARNINGS
++--------
++
++Never modify the base or the storage directorys while the mini_fo
++file system is mounted, or you might crash you system. Simply accessing
++and reading should not cause any trouble.
++
++Exporting a mini_fo mount point via NFS has not been tested, and may
++or may not work.
++
++Check the RELEASE_NOTES for details on bugs and features.
++
++
++
++Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++
++This program is free software; you can redistribute it and/or
++modify it under the terms of the GNU General Public License
++as published by the Free Software Foundation; either version
++2 of the License, or (at your option) any later version.
++
++
+--- /dev/null
++++ b/fs/mini_fo/RELEASE_NOTES
+@@ -0,0 +1,111 @@
++Release:	mini_fo-0.6.1 (v0-6-1)
++Date:		21.09.2005
++
++
++Changes:
++--------
++v0-6-1:
++
++- bugfixes (see ChangeLog)
++
++- two helper scripts "mini_fo_merge" and "mini_fo_overlay" (see
++  README for details).
++
++v0-6-0:
++
++- Support for 2.4 and 2.6 (see Makefile)
++
++- Partial hard link support (creating works as expected, but already
++  existing links in the base file system will be treated as if they
++  were individual files).
++
++- Various bugfixes and cleanups.
++
++
++v0-6-0-pre1:
++
++- This is mini_fo-0-6-0-pre1! This release is a complete rewrite of
++  many vital mini_fo parts such as the old whiteout list code which
++  has been replaced by the new META subsystem.
++
++- Light weight directory renaming implemented. This means if a
++  directory is renamed via the mini_fo filesystem this will no longer
++  result in a complete copy in storage, instead only one empty
++  directory will be created. All base filed contained in the original
++  directory stay there until modified.
++
++- Special files (creating, renaming, deleting etc.) now working.
++
++- Many bugfixes and cleanup, mini_fo is now a lot more stable.
++
++
++v0-5-10:
++
++- Final release of the 0-5-* versions. Next will be a complete rewrite
++  of many features. This release contains several bugfixes related to
++  directory renaming.
++
++
++v0-5-10-pre6:
++
++- Lots of cleanup and several bugfixes related to directory deleting
++
++- Directory renaming suddenly works, what is most likely due to the
++  fact tha that "mv" is smart: if the classic rename doesn't work it
++  will assume that source and target file are on different fs and will
++  copy the directory and try to remove the source directory. Until
++  directory removing wasn't implemented, it would fail to do this and
++  rollback.
++  So, directory renaming works for now, but it doesn't yet do what you
++  would expect from a overlay fs, so use with care.
++
++
++v0-5-10-pre5:
++
++- implemented directory deleting
++- made parsing of mount options more stable
++- New format of mount options! (See README)
++- I can't reproduce the unknown panic with 2.4.25 anymore, so I'll
++  happily assume it never existed!
++
++
++Implemented features:
++---------------------
++
++- creating hard links (see BUGS on already existing hard links)
++- lightweight directory renaming
++- renaming device files, pipes, sockets, etc.
++- creating, renaming, deleting of special files
++- deleting directorys
++- general directory reading (simple "ls" )
++- creating files in existing directorys
++- creating directorys
++- renaming files.
++- reading and writing files (involves opening)
++- appending to files (creates copy in storage)
++- deleting files
++- llseek works too, what allows editors to work
++- persistency (a deleted file stay deleted over remounts)
++- use of symbolic links
++- creating of device files
++
++
++Not (yet) implemented features:
++-------------------------------
++
++- full hard link support.
++
++
++
++BUGS:
++-----
++
++Hard links in the base file system will be treated as individual
++files, not as links to one inode.
++
++The main problem with hard links isn't allowing to create them, but
++their pure existence. If you modify a base hard link, the changes made
++will only show up on this link, the other link will remain in the
++original state. I hope to fix this someday. Please note that this does
++not effect the special hard links '.' and '..', that are handled
++seperately by the lower fs.
+--- /dev/null
++++ b/fs/mini_fo/state.c
+@@ -0,0 +1,620 @@
++/*
++ * Copyright (C) 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif /* HAVE_CONFIG_H */
++
++#include "fist.h"
++#include "mini_fo.h"
++
++
++/* create the storage file, setup new states */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++int create_sto_reg_file(dentry_t *dentry, int mode, struct nameidata *nd)
++#else
++int create_sto_reg_file(dentry_t *dentry, int mode)
++#endif
++{
++	int err = 0;
++	inode_t *dir;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++
++	if(exists_in_storage(dentry)) {
++		printk(KERN_CRIT "mini_fo: create_sto_file: wrong type or state.\n");
++		err = -EINVAL;
++		goto out;
++	}
++	err = get_neg_sto_dentry(dentry);
++
++	if (err) {
++		printk(KERN_CRIT "mini_fo: create_sto_file: ERROR getting neg. sto dentry.\n");
++		goto out;
++	}
++
++	dir = dentry->d_parent->d_inode;
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* lock parent */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++        down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = PTR_ERR(hidden_sto_dir_dentry);
++        if (IS_ERR(hidden_sto_dir_dentry))
++                goto out;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	err = vfs_create(hidden_sto_dir_dentry->d_inode,
++			 hidden_sto_dentry,
++			 mode, nd);
++#else
++	err = vfs_create(hidden_sto_dir_dentry->d_inode,
++			 hidden_sto_dentry,
++			 mode);
++#endif
++        if(err) {
++		printk(KERN_CRIT "mini_fo: create_sto_file: ERROR creating sto file.\n");
++                goto out_lock;
++	}
++
++	if(!dtohd2(dentry)->d_inode) {
++		printk(KERN_CRIT "mini_fo: create_sto_file: ERROR creating sto file [2].\n");
++                err = -EINVAL;
++                goto out_lock;
++        }
++
++        /* interpose the new inode */
++        if(dtost(dentry) == DELETED) {
++                dtost(dentry) = DEL_REWRITTEN;
++                err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0);
++                if(err)
++                        goto out_lock;
++        }
++        else if(dtost(dentry) == NON_EXISTANT) {
++                dtost(dentry) = CREATED;
++                err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0);
++                if(err)
++                        goto out_lock;
++        }
++        else if(dtost(dentry) == UNMODIFIED) {
++                dtost(dentry) = MODIFIED;
++                /* interpose on new inode */
++                if(itohi2(dentry->d_inode) != NULL) {
++                        printk(KERN_CRIT "mini_fo: create_sto_file: invalid inode detected.\n");
++                        err = -EINVAL;
++                        goto out_lock;
++                }
++                itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++	}
++	fist_copy_attr_timesizes(dentry->d_parent->d_inode,
++				 hidden_sto_dir_dentry->d_inode);
++
++ out_lock:
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++        dput(hidden_sto_dir_dentry);
++ out:
++	return err;
++}
++
++/* create the sto dir, setup states */
++int create_sto_dir(dentry_t *dentry, int mode)
++{
++	int err = 0;
++	inode_t *dir;
++	dentry_t *hidden_sto_dentry;
++        dentry_t *hidden_sto_dir_dentry;
++
++	/* had to take the "!S_ISDIR(mode))" check out, because it failed */
++	if(exists_in_storage(dentry)) {
++                printk(KERN_CRIT "mini_fo: create_sto_dir: wrong type or state.\\
++n");
++                err = -EINVAL;
++                goto out;
++        }
++
++	err = get_neg_sto_dentry(dentry);
++	if(err) {
++		err = -EINVAL;
++		goto out;
++	}
++
++	dir = dentry->d_parent->d_inode;
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = PTR_ERR(hidden_sto_dir_dentry);
++	if (IS_ERR(hidden_sto_dir_dentry))
++		goto out;
++
++	err = vfs_mkdir(hidden_sto_dir_dentry->d_inode,
++			hidden_sto_dentry,
++			mode);
++	if(err) {
++		printk(KERN_CRIT "mini_fo: create_sto_dir: ERROR creating sto dir.\n");
++		goto out_lock;
++	}
++
++	if(!dtohd2(dentry)->d_inode) {
++		printk(KERN_CRIT "mini_fo: create_sto_dir: ERROR creating sto dir [2].\n");
++		err = -EINVAL;
++		goto out_lock;
++	}
++
++	/* interpose the new inode */
++	if(dtost(dentry) == DELETED) {
++		dtost(dentry) = DEL_REWRITTEN;
++		err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0);
++		if(err)
++			goto out_lock;
++	}
++	else if(dtopd(dentry)->state == NON_EXISTANT) {
++		dtopd(dentry)->state = CREATED;
++		err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0);
++		if(err)
++			goto out_lock;
++	}
++	else if(dtopd(dentry)->state == UNMODIFIED) {
++		dtopd(dentry)->state = MODIFIED;
++		/* interpose on new inode */
++		if(itohi2(dentry->d_inode) != NULL) {
++			printk(KERN_CRIT "mini_fo:  create_sto_dir: ERROR, invalid inode detected.\n");
++			err = -EINVAL;
++			goto out_lock;
++		}
++		itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++	}
++
++	fist_copy_attr_timesizes(dir, hidden_sto_dir_dentry->d_inode);
++
++	/* initalize the wol list */
++	itopd(dentry->d_inode)->deleted_list_size = -1;
++	itopd(dentry->d_inode)->renamed_list_size = -1;
++	meta_build_lists(dentry);
++
++
++ out_lock:
++	/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++ out:
++	return err;
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++int create_sto_nod(dentry_t *dentry, int mode, dev_t dev)
++#else
++int create_sto_nod(dentry_t *dentry, int mode, int dev)
++#endif
++{
++	int err = 0;
++	inode_t *dir;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++
++	if(exists_in_storage(dentry)) {
++		err = -EEXIST;
++		goto out;
++	}
++	err = get_neg_sto_dentry(dentry);
++
++	if (err) {
++                printk(KERN_CRIT "mini_fo: create_sto_nod: ERROR getting neg. sto dentry.\n");
++                goto out;
++        }
++
++	dir = dentry->d_parent->d_inode;
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* lock parent */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = PTR_ERR(hidden_sto_dir_dentry);
++	if (IS_ERR(hidden_sto_dir_dentry))
++		goto out;
++
++	err = vfs_mknod(hidden_sto_dir_dentry->d_inode, hidden_sto_dentry, mode, dev);
++	if(err)
++		goto out_lock;
++
++	if(!dtohd2(dentry)->d_inode) {
++		printk(KERN_CRIT "mini_fo: create_sto_nod: creating storage inode failed [1].\n");
++		err = -EINVAL; /* return something indicating failure */
++		goto out_lock;
++	}
++
++	/* interpose the new inode */
++	if(dtost(dentry) == DELETED) {
++		dtost(dentry) = DEL_REWRITTEN;
++		err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0);
++		if(err)
++			goto out_lock;
++	}
++	else if(dtost(dentry) == NON_EXISTANT) {
++		dtost(dentry) = CREATED;
++		err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0);
++		if(err)
++			goto out_lock;
++	}
++	else if(dtost(dentry) == UNMODIFIED) {
++		dtost(dentry) = MODIFIED;
++		/* interpose on new inode */
++		if(itohi2(dentry->d_inode) != NULL) {
++			printk(KERN_CRIT "mini_fo: create_sto_nod: error, invalid inode detected.\n");
++			err = -EINVAL;
++			goto out_lock;
++		}
++		itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++	}
++
++	fist_copy_attr_timesizes(dir, hidden_sto_dir_dentry->d_inode);
++
++ out_lock:
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++ out:
++	return err;
++}
++
++
++/* unimplemented (and possibly not usefull):
++
++   nondir-del_to_del_rew
++   nondir-non_exist_to_creat
++
++   dir-unmod_to_del
++   dir-mod_to_del
++   dir-creat_to_del
++   dir-del_rew_to_del
++   dir-del_to_del_rew
++   dir-non_exist_to_creat
++*/
++
++
++/* bring a file of any type from state UNMODIFIED to MODIFIED */
++int nondir_unmod_to_mod(dentry_t *dentry, int cp_flag)
++{
++	int err = 0;
++	struct vfsmount *tgt_mnt;
++	struct vfsmount *src_mnt;
++	dentry_t *tgt_dentry;
++	dentry_t *src_dentry;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++
++	check_mini_fo_dentry(dentry);
++
++	if((dtost(dentry) != UNMODIFIED) ||
++	   S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++	err = get_neg_sto_dentry(dentry);
++
++	if (err) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                  ERROR getting neg. sto dentry.\n");
++		goto out;
++	}
++
++	/* create sto file */
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* lock parent */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++        down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = PTR_ERR(hidden_sto_dir_dentry);
++        if (IS_ERR(hidden_sto_dir_dentry))
++                goto out;
++
++	/* handle different types of nondirs */
++	if(S_ISCHR(dentry->d_inode->i_mode) ||
++	   S_ISBLK(dentry->d_inode->i_mode)) {
++		err = vfs_mknod(hidden_sto_dir_dentry->d_inode,
++				hidden_sto_dentry,
++				dtohd(dentry)->d_inode->i_mode,
++				dtohd(dentry)->d_inode->i_rdev);
++	}
++
++	else if(S_ISREG(dentry->d_inode->i_mode)) {
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		err = vfs_create(hidden_sto_dir_dentry->d_inode,
++				 hidden_sto_dentry,
++				 dtohd(dentry)->d_inode->i_mode, NULL);
++#else
++		err = vfs_create(hidden_sto_dir_dentry->d_inode,
++				 hidden_sto_dentry,
++				 dtohd(dentry)->d_inode->i_mode);
++#endif
++	}
++        if(err) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                  ERROR creating sto file.\n");
++                goto out_lock;
++	}
++
++	/* interpose on new inode */
++	if(itohi2(dentry->d_inode) != NULL) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                  ERROR, invalid inode detected.\n");
++		err = -EINVAL;
++		goto out_lock;
++	}
++
++	itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++
++        fist_copy_attr_timesizes(dentry->d_parent->d_inode,
++				 hidden_sto_dir_dentry->d_inode);
++	dtost(dentry) = MODIFIED;
++
++	/* copy contents if regular file and cp_flag = 1 */
++	if((cp_flag == 1) && S_ISREG(dentry->d_inode->i_mode)) {
++
++		/* unlock first */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++		dput(hidden_sto_dir_dentry);
++
++		tgt_dentry = dtohd2(dentry);
++		tgt_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++		src_dentry = dtohd(dentry);
++		src_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt;
++
++		err = mini_fo_cp_cont(tgt_dentry, tgt_mnt,
++				      src_dentry, src_mnt);
++		if(err) {
++			printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                          ERROR copying contents.\n");
++		}
++		goto out;
++	}
++
++ out_lock:
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++        dput(hidden_sto_dir_dentry);
++ out:
++	return err;
++}
++
++/* this function is currently identical to nondir_creat_to_del */
++int nondir_del_rew_to_del(dentry_t *dentry)
++{
++	return nondir_creat_to_del(dentry);
++}
++
++int nondir_creat_to_del(dentry_t *dentry)
++{
++	int err = 0;
++
++	inode_t *hidden_sto_dir_inode;
++	dentry_t *hidden_sto_dir_dentry;
++	dentry_t *hidden_sto_dentry;
++
++	check_mini_fo_dentry(dentry);
++
++	/* for now this function serves for both state DEL_REWRITTEN and
++	 * CREATED */
++	if(!(dtost(dentry) == CREATED || (dtost(dentry) == DEL_REWRITTEN)) ||
++	   S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: nondir_mod_to_del/del_rew_to_del: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++
++	hidden_sto_dir_inode = itohi2(dentry->d_parent->d_inode);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry);*/
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	/* avoid destroying the hidden inode if the file is in use */
++	dget(hidden_sto_dentry);
++	err = vfs_unlink(hidden_sto_dir_inode, hidden_sto_dentry);
++	dput(hidden_sto_dentry);
++	if(!err)
++		d_delete(hidden_sto_dentry);
++
++	/* propagate number of hard-links */
++	dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++
++	dtost(dentry) = NON_EXISTANT;
++
++	/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++
++ out:
++	return err;
++}
++
++int nondir_mod_to_del(dentry_t *dentry)
++{
++	int err;
++	dentry_t *hidden_sto_dentry;
++	inode_t *hidden_sto_dir_inode;
++	dentry_t *hidden_sto_dir_dentry;
++
++	check_mini_fo_dentry(dentry);
++
++	if(dtost(dentry) != MODIFIED ||
++	   S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: nondir_mod_to_del: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++
++	hidden_sto_dir_inode = itohi2(dentry->d_parent->d_inode);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* was hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	/* avoid destroying the hidden inode if the file is in use */
++	dget(hidden_sto_dentry);
++	err = vfs_unlink(hidden_sto_dir_inode, hidden_sto_dentry);
++	dput(hidden_sto_dentry);
++	if(!err)
++		d_delete(hidden_sto_dentry);
++
++	/* propagate number of hard-links */
++	dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++
++	/* dput base dentry, this will relase the inode and free the
++	 * dentry, as we will never need it again. */
++	dput(dtohd(dentry));
++	dtohd(dentry) = NULL;
++	dtost(dentry) = DELETED;
++
++	/* add deleted file to META-file */
++	meta_add_d_entry(dentry->d_parent,
++			 dentry->d_name.name,
++			 dentry->d_name.len);
++
++	/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++
++ out:
++	return err;
++}
++
++int nondir_unmod_to_del(dentry_t *dentry)
++{
++	int err = 0;
++
++	check_mini_fo_dentry(dentry);
++
++	if(dtost(dentry) != UNMODIFIED ||
++	   S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_del: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++
++	 /* next we have to get a negative dentry for the storage file */
++	err = get_neg_sto_dentry(dentry);
++
++	if(err)
++		goto out;
++
++	/* add deleted file to META lists */
++	err = meta_add_d_entry(dentry->d_parent,
++			       dentry->d_name.name,
++			       dentry->d_name.len);
++
++	if(err)
++		goto out;
++
++	/* dput base dentry, this will relase the inode and free the
++	 * dentry, as we will never need it again. */
++	dput(dtohd(dentry));
++	dtohd(dentry) = NULL;
++	dtost(dentry) = DELETED;
++
++ out:
++	return err;
++}
++
++/* bring a dir from state UNMODIFIED to MODIFIED */
++int dir_unmod_to_mod(dentry_t *dentry)
++{
++	int err;
++
++	check_mini_fo_dentry(dentry);
++
++	if(dtost(dentry) != UNMODIFIED ||
++	   !S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: dir_unmod_to_mod: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++
++	/* this creates our dir incl. sto. structure */
++	err = build_sto_structure(dentry->d_parent, dentry);
++	if(err) {
++		printk(KERN_CRIT "mini_fo: dir_unmod_to_mod: \
++                                  build_sto_structure failed.\n");
++		goto out;
++	}
++ out:
++	return err;
++}
++
+--- /dev/null
++++ b/fs/mini_fo/super.c
+@@ -0,0 +1,281 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++
++
++STATIC void
++mini_fo_read_inode(inode_t *inode)
++{
++	static struct address_space_operations mini_fo_empty_aops;
++
++	__itopd(inode) = kmalloc(sizeof(struct mini_fo_inode_info), GFP_KERNEL);
++	if (!itopd(inode)) {
++		printk("<0>%s:%s:%d: No kernel memory!\n", __FILE__, __FUNCTION__, __LINE__);
++		ASSERT(NULL);
++	}
++	itohi(inode) = NULL;
++	itohi2(inode) = NULL;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	inode->i_version++;
++#else
++	inode->i_version = ++event;	/* increment inode version */
++#endif
++	inode->i_op = &mini_fo_main_iops;
++	inode->i_fop = &mini_fo_main_fops;
++#if 0
++	/*
++	 * XXX: To export a file system via NFS, it has to have the
++	 * FS_REQUIRES_DEV flag, so turn it on.  But should we inherit it from
++	 * the lower file system, or can we allow our file system to be exported
++	 * even if the lower one cannot be natively exported.
++	 */
++	inode->i_sb->s_type->fs_flags |= FS_REQUIRES_DEV;
++	/*
++	 * OK, the above was a hack, which is now turned off because it may
++	 * cause a panic/oops on some systems.  The correct way to export a
++	 * "nodev" filesystem is via using nfs-utils > 1.0 and the "fsid=" export
++	 * parameter, which requires 2.4.20 or later.
++	 */
++#endif
++	/* I don't think ->a_ops is ever allowed to be NULL */
++	inode->i_mapping->a_ops = &mini_fo_empty_aops;
++}
++
++
++#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
++/*
++ * No need to call write_inode() on the lower inode, as it
++ * will have been marked 'dirty' anyway. But we might need
++ * to write some of our own stuff to disk.
++ */
++STATIC void
++mini_fo_write_inode(inode_t *inode, int sync)
++{
++	print_entry_location();
++	print_exit_location();
++}
++#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++
++
++STATIC void
++mini_fo_put_inode(inode_t *inode)
++{
++	/*
++	 * This is really funky stuff:
++	 * Basically, if i_count == 1, iput will then decrement it and this inode will be destroyed.
++	 * It is currently holding a reference to the hidden inode.
++	 * Therefore, it needs to release that reference by calling iput on the hidden inode.
++	 * iput() _will_ do it for us (by calling our clear_inode), but _only_ if i_nlink == 0.
++	 * The problem is, NFS keeps i_nlink == 1 for silly_rename'd files.
++	 * So we must for our i_nlink to 0 here to trick iput() into calling our clear_inode.
++	 */
++	if (atomic_read(&inode->i_count) == 1)
++		inode->i_nlink = 0;
++}
++
++
++#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
++/*
++ * we now define delete_inode, because there are two VFS paths that may
++ * destroy an inode: one of them calls clear inode before doing everything
++ * else that's needed, and the other is fine.  This way we truncate the inode
++ * size (and its pages) and then clear our own inode, which will do an iput
++ * on our and the lower inode.
++ */
++STATIC void
++mini_fo_delete_inode(inode_t *inode)
++{
++	print_entry_location();
++
++	fist_checkinode(inode, "mini_fo_delete_inode IN");
++	inode->i_size = 0;		/* every f/s seems to do that */
++	clear_inode(inode);
++
++	print_exit_location();
++}
++#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++
++
++/* final actions when unmounting a file system */
++STATIC void
++mini_fo_put_super(super_block_t *sb)
++{
++	if (stopd(sb)) {
++		mntput(stopd(sb)->hidden_mnt);
++		mntput(stopd(sb)->hidden_mnt2);
++
++		/* mk: no! dput(stopd(sb)->base_dir_dentry);
++		   dput(stopd(sb)->storage_dir_dentry); */
++
++		kfree(stopd(sb));
++		__stopd(sb) = NULL;
++	}
++}
++
++
++#ifdef NOT_NEEDED
++/*
++ * This is called in do_umount before put_super.
++ * The superblock lock is not held yet.
++ * We probably do not need to define this or call write_super
++ * on the hidden_sb, because sync_supers() will get to hidden_sb
++ * sooner or later.  But it is also called from file_fsync()...
++ */
++STATIC void
++mini_fo_write_super(super_block_t *sb)
++{
++	return;
++}
++#endif /* NOT_NEEDED */
++
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++mini_fo_statfs(struct dentry *d, struct kstatfs *buf)
++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_statfs(super_block_t *sb, struct kstatfs *buf)
++#else
++mini_fo_statfs(super_block_t *sb, struct statfs *buf)
++#endif
++{
++	int err = 0;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++	struct dentry *hidden_d;
++
++	hidden_d = dtohd(d);
++	err = vfs_statfs(hidden_d, buf);
++#else
++	super_block_t *hidden_sb;
++
++	hidden_sb = stohs(sb);
++	err = vfs_statfs(hidden_sb, buf);
++#endif
++
++	return err;
++}
++
++
++/*
++ * XXX: not implemented.  This is not allowed yet.
++ * Should we call this on the hidden_sb?  Probably not.
++ */
++STATIC int
++mini_fo_remount_fs(super_block_t *sb, int *flags, char *data)
++{
++	//printk(KERN_CRIT "mini_fo_remount_fs: WARNING, this function is umimplemented.\n");
++	return -ENOSYS;
++}
++
++
++/*
++ * Called by iput() when the inode reference count reached zero
++ * and the inode is not hashed anywhere.  Used to clear anything
++ * that needs to be, before the inode is completely destroyed and put
++ * on the inode free list.
++ */
++STATIC void
++mini_fo_clear_inode(inode_t *inode)
++{
++	/*
++	 * Decrement a reference to a hidden_inode, which was incremented
++	 * by our read_inode when it was created initially.
++	 */
++
++	/* release the wol_list */
++	if(S_ISDIR(inode->i_mode)) {
++		__meta_put_lists(inode);
++	}
++
++	/* mk: fan out fun */
++	if(itohi(inode))
++		iput(itohi(inode));
++	if(itohi2(inode))
++		iput(itohi2(inode));
++
++	// XXX: why this assertion fails?
++	// because it doesn't like us
++	// ASSERT((inode->i_state & I_DIRTY) == 0);
++	kfree(itopd(inode));
++	__itopd(inode) = NULL;
++}
++
++
++/*
++ * Called in do_umount() if the MNT_FORCE flag was used and this
++ * function is defined.  See comment in linux/fs/super.c:do_umount().
++ * Used only in nfs, to kill any pending RPC tasks, so that subsequent
++ * code can actually succeed and won't leave tasks that need handling.
++ *
++ * PS. I wonder if this is somehow useful to undo damage that was
++ * left in the kernel after a user level file server (such as amd)
++ * dies.
++ */
++STATIC void
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++mini_fo_umount_begin(struct vfsmount *mnt, int flags)
++{
++	struct vfsmount *hidden_mnt;
++
++	hidden_mnt = stopd(mnt->mnt_sb)->hidden_mnt;
++
++	if (hidden_mnt->mnt_sb->s_op->umount_begin)
++		hidden_mnt->mnt_sb->s_op->umount_begin(hidden_mnt, flags);
++
++}
++#else
++mini_fo_umount_begin(super_block_t *sb)
++{
++	super_block_t *hidden_sb;
++
++	hidden_sb = stohs(sb);
++
++	if (hidden_sb->s_op->umount_begin)
++		hidden_sb->s_op->umount_begin(hidden_sb);
++
++}
++#endif
++
++
++struct super_operations mini_fo_sops =
++{
++	read_inode:		mini_fo_read_inode,
++#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
++	write_inode:	mini_fo_write_inode,
++#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++	put_inode:		mini_fo_put_inode,
++#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
++	delete_inode:	mini_fo_delete_inode,
++#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++	put_super:		mini_fo_put_super,
++	statfs:		mini_fo_statfs,
++	remount_fs:		mini_fo_remount_fs,
++	clear_inode:	mini_fo_clear_inode,
++	umount_begin:	mini_fo_umount_begin,
++};
+--- /dev/null
++++ b/fs/mini_fo/Kconfig
+@@ -0,0 +1,3 @@
++config MINI_FO
++	tristate "Mini fanout overlay filesystem"
++
diff --git a/target/linux/generic/patches-2.6.32/210-mini_fo_2.6.25_fixes.patch b/target/linux/generic/patches-2.6.32/210-mini_fo_2.6.25_fixes.patch
new file mode 100644
index 0000000000..d71e3b6faa
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/210-mini_fo_2.6.25_fixes.patch
@@ -0,0 +1,143 @@
+--- a/fs/mini_fo/main.c
++++ b/fs/mini_fo/main.c
+@@ -79,6 +79,7 @@ mini_fo_tri_interpose(dentry_t *hidden_d
+ 	 * of the new inode's fields
+ 	 */
+ 
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,25)
+ 	/*
+ 	 * original: inode = iget(sb, hidden_inode->i_ino);
+ 	 */
+@@ -87,6 +88,13 @@ mini_fo_tri_interpose(dentry_t *hidden_d
+ 		err = -EACCES;		/* should be impossible??? */
+ 		goto out;
+ 	}
++#else
++	inode = mini_fo_iget(sb, iunique(sb, 25));
++	if (IS_ERR(inode)) {
++		err = PTR_ERR(inode);
++		goto out;
++	}
++#endif
+ 
+ 	/*
+ 	 * interpose the inode if not already interposed
+@@ -184,9 +192,9 @@ mini_fo_parse_options(super_block_t *sb,
+ 				hidden_root = ERR_PTR(err);
+ 				goto out;
+ 			}
+-			hidden_root = nd.dentry;
+-			stopd(sb)->base_dir_dentry = nd.dentry;
+-			stopd(sb)->hidden_mnt = nd.mnt;
++			hidden_root = nd_get_dentry(&nd);
++			stopd(sb)->base_dir_dentry = nd_get_dentry(&nd);
++			stopd(sb)->hidden_mnt = nd_get_mnt(&nd);
+ 
+ 		} else if(!strncmp("sto=", options, 4)) {
+ 			/* parse the storage dir */
+@@ -204,9 +212,9 @@ mini_fo_parse_options(super_block_t *sb,
+ 				hidden_root2 = ERR_PTR(err);
+ 				goto out;
+ 			}
+-			hidden_root2 = nd2.dentry;
+-			stopd(sb)->storage_dir_dentry = nd2.dentry;
+-			stopd(sb)->hidden_mnt2 = nd2.mnt;
++			hidden_root2 = nd_get_dentry(&nd2);
++			stopd(sb)->storage_dir_dentry = nd_get_dentry(&nd2);
++			stopd(sb)->hidden_mnt2 = nd_get_mnt(&nd2);
+ 			stohs2(sb) = hidden_root2->d_sb;
+ 
+ 			/* validate storage dir, this is done in
+--- a/fs/mini_fo/mini_fo.h
++++ b/fs/mini_fo/mini_fo.h
+@@ -302,6 +302,10 @@ extern int mini_fo_tri_interpose(dentry_
+ extern int mini_fo_cp_cont(dentry_t *tgt_dentry, struct vfsmount *tgt_mnt,
+ 			   dentry_t *src_dentry, struct vfsmount *src_mnt);
+ 
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25)
++extern struct inode *mini_fo_iget(struct super_block *sb, unsigned long ino);
++#endif
++
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+ extern int mini_fo_create(inode_t *dir, dentry_t *dentry, int mode, struct nameidata *nd);
+ 
+@@ -501,6 +505,29 @@ static inline void double_unlock(struct 
+ #endif  /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) */
+ #endif /* __KERNEL__ */
+ 
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25)
++static inline dentry_t *nd_get_dentry(struct nameidata *nd)
++{
++	return (nd->path.dentry);
++}
++
++static inline struct vfsmount *nd_get_mnt(struct nameidata *nd)
++{
++	return (nd->path.mnt);
++}
++#else
++static inline dentry_t *nd_get_dentry(struct nameidata *nd)
++{
++	return (nd->dentry);
++}
++
++static inline struct vfsmount *nd_get_mnt(struct nameidata *nd)
++{
++	return (nd->mnt);
++}
++#endif
++
+ /*
+  * Definitions for user and kernel code
+  */
+--- a/fs/mini_fo/super.c
++++ b/fs/mini_fo/super.c
+@@ -262,10 +262,31 @@ mini_fo_umount_begin(super_block_t *sb)
+ }
+ #endif
+ 
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25)
++struct inode *
++mini_fo_iget(struct super_block *sb, unsigned long ino)
++{
++	struct inode *inode;
++
++	inode = iget_locked(sb, ino);
++	if (!inode)
++		return ERR_PTR(-ENOMEM);
++
++	if (!(inode->i_state & I_NEW))
++		return inode;
++
++	mini_fo_read_inode(inode);
++
++	unlock_new_inode(inode);
++	return inode;
++}
++#endif /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25) */
+ 
+ struct super_operations mini_fo_sops =
+ {
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,25)
+ 	read_inode:		mini_fo_read_inode,
++#endif
+ #if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
+ 	write_inode:	mini_fo_write_inode,
+ #endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
+--- a/fs/mini_fo/aux.c
++++ b/fs/mini_fo/aux.c
+@@ -164,11 +164,11 @@ dentry_t *bpath_walk(super_block_t *sb, 
+ 	err = vfs_path_lookup(mnt->mnt_root, mnt, bpath+1, 0, &nd);
+ 
+ 	/* validate */
+-	if (err || !nd.dentry || !nd.dentry->d_inode) {
++	if (err || !nd_get_dentry(&nd) || !nd_get_dentry(&nd)->d_inode) {
+ 		printk(KERN_CRIT "mini_fo: bpath_walk: path_walk failed.\n");
+ 		return NULL;
+ 	}
+-	return nd.dentry;
++	return nd_get_dentry(&nd);
+ }
+ 
+ 
diff --git a/target/linux/generic/patches-2.6.32/211-mini_fo_2.6.25_dentry_open_war.patch b/target/linux/generic/patches-2.6.32/211-mini_fo_2.6.25_dentry_open_war.patch
new file mode 100644
index 0000000000..48a19429b9
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/211-mini_fo_2.6.25_dentry_open_war.patch
@@ -0,0 +1,66 @@
+--- a/fs/mini_fo/meta.c
++++ b/fs/mini_fo/meta.c
+@@ -442,6 +442,11 @@ int meta_write_d_entry(dentry_t *dentry,
+ 			   S_IRUSR | S_IWUSR);
+ #endif
+ 	}
++
++	/* $%& err, is this correct? */
++	meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++	mntget(meta_mnt);
++
+         /* open META-file for writing */
+         meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
+         if(!meta_file || IS_ERR(meta_file)) {
+@@ -535,6 +540,11 @@ int meta_write_r_entry(dentry_t *dentry,
+ 			   meta_dentry, S_IRUSR | S_IWUSR);
+ #endif
+ 	}
++
++	/* $%& err, is this correct? */
++	meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++	mntget(meta_mnt);
++
+         /* open META-file for writing */
+         meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
+         if(!meta_file || IS_ERR(meta_file)) {
+@@ -671,14 +681,16 @@ int meta_sync_d_list(dentry_t *dentry, i
+ 		}
+ 	}
+ 
++	/* $%& err, is this correct? */
++	meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++	mntget(meta_mnt);
++
+         /* open META-file for writing */
+         meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
+                                   ERROR opening meta file.\n");
+-		/* we don't mntget so we dont't mntput (for now)
+-		 * mntput(meta_mnt);
+-		 */
++		mntput(meta_mnt);
+ 		dput(meta_dentry);
+ 		err = -1;
+                 goto out;
+@@ -811,14 +823,16 @@ int meta_sync_r_list(dentry_t *dentry, i
+ 		}
+ 	}
+ 
++	/* $%& err, is this correct? */
++	meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++	mntget(meta_mnt);
++
+         /* open META-file for writing */
+         meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
+                                   ERROR opening meta file.\n");
+-		/* we don't mntget so we dont't mntput (for now)
+-		 * mntput(meta_mnt);
+-		 */
++		mntput(meta_mnt);
+ 		dput(meta_dentry);
+ 		err = -1;
+                 goto out;
diff --git a/target/linux/generic/patches-2.6.32/212-mini_fo_2.6.26_fixes.patch b/target/linux/generic/patches-2.6.32/212-mini_fo_2.6.26_fixes.patch
new file mode 100644
index 0000000000..8bd9ba3244
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/212-mini_fo_2.6.26_fixes.patch
@@ -0,0 +1,37 @@
+--- a/fs/mini_fo/super.c
++++ b/fs/mini_fo/super.c
+@@ -84,6 +84,7 @@ mini_fo_write_inode(inode_t *inode, int 
+ #endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
+ 
+ 
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)
+ STATIC void
+ mini_fo_put_inode(inode_t *inode)
+ {
+@@ -99,6 +100,7 @@ mini_fo_put_inode(inode_t *inode)
+ 	if (atomic_read(&inode->i_count) == 1)
+ 		inode->i_nlink = 0;
+ }
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26) */
+ 
+ 
+ #if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
+@@ -238,7 +240,7 @@ mini_fo_clear_inode(inode_t *inode)
+  * dies.
+  */
+ STATIC void
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26))
+ mini_fo_umount_begin(struct vfsmount *mnt, int flags)
+ {
+ 	struct vfsmount *hidden_mnt;
+@@ -290,7 +292,9 @@ struct super_operations mini_fo_sops =
+ #if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
+ 	write_inode:	mini_fo_write_inode,
+ #endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)
+ 	put_inode:		mini_fo_put_inode,
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26) */
+ #if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
+ 	delete_inode:	mini_fo_delete_inode,
+ #endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
diff --git a/target/linux/generic/patches-2.6.32/213-mini_fo_2.6.27_fixes.patch b/target/linux/generic/patches-2.6.32/213-mini_fo_2.6.27_fixes.patch
new file mode 100644
index 0000000000..f92c18b254
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/213-mini_fo_2.6.27_fixes.patch
@@ -0,0 +1,41 @@
+--- a/fs/mini_fo/inode.c
++++ b/fs/mini_fo/inode.c
+@@ -439,7 +439,7 @@ mini_fo_symlink(inode_t *dir, dentry_t *
+ 	int err=0;
+ 	dentry_t *hidden_sto_dentry;
+ 	dentry_t *hidden_sto_dir_dentry;
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27))
+         umode_t mode;
+ #endif
+ 
+@@ -466,7 +466,7 @@ mini_fo_symlink(inode_t *dir, dentry_t *
+ 	down(&hidden_sto_dir_dentry->d_inode->i_sem);
+ #endif
+ 
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27))
+ 	mode = S_IALLUGO;
+ 	err = vfs_symlink(hidden_sto_dir_dentry->d_inode,
+ 			  hidden_sto_dentry, symname, mode);
+@@ -1128,7 +1128,7 @@ void mini_fo_put_link(struct dentry *den
+ #endif
+ 
+ STATIC int
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27))
+ mini_fo_permission(inode_t *inode, int mask, struct nameidata *nd)
+ #else
+ mini_fo_permission(inode_t *inode, int mask)
+@@ -1150,8 +1150,9 @@ mini_fo_permission(inode_t *inode, int m
+ 	 *	if (err)
+ 	 *		goto out;
+ 	 */
+-
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
++	err = inode_permission(hidden_inode, mask);
++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+ 	err = permission(hidden_inode, mask, nd);
+ #else
+ 	err = permission(hidden_inode, mask);
diff --git a/target/linux/generic/patches-2.6.32/214-mini_fo_2.6.29.patch b/target/linux/generic/patches-2.6.32/214-mini_fo_2.6.29.patch
new file mode 100644
index 0000000000..63d704bf51
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/214-mini_fo_2.6.29.patch
@@ -0,0 +1,96 @@
+--- a/fs/mini_fo/aux.c
++++ b/fs/mini_fo/aux.c
+@@ -236,7 +236,7 @@ int mini_fo_cp_cont(dentry_t *tgt_dentry
+ 	mntget(src_mnt);
+ 
+ 	/* open file write only */
+-	tgt_file = dentry_open(tgt_dentry, tgt_mnt, 0x1);
++	tgt_file = dentry_open(tgt_dentry, tgt_mnt, 0x1, current_cred());
+ 	if(!tgt_file || IS_ERR(tgt_file)) {
+ 		printk(KERN_CRIT "mini_fo_cp_cont: ERROR opening target file.\n");
+ 		err = PTR_ERR(tgt_file);
+@@ -244,7 +244,7 @@ int mini_fo_cp_cont(dentry_t *tgt_dentry
+ 	}
+ 
+ 	/* open file read only */
+-	src_file = dentry_open(src_dentry, src_mnt, 0x0);
++	src_file = dentry_open(src_dentry, src_mnt, 0x0, current_cred());
+ 	if(!src_file || IS_ERR(src_file)) {
+ 		printk(KERN_CRIT "mini_fo_cp_cont: ERROR opening source file.\n");
+ 		err = PTR_ERR(src_file);
+--- a/fs/mini_fo/file.c
++++ b/fs/mini_fo/file.c
+@@ -437,7 +437,7 @@ mini_fo_open(inode_t *inode, file_t *fil
+ 			mntget(stopd(inode->i_sb)->hidden_mnt);
+ 			hidden_file = dentry_open(hidden_dentry,
+ 						  stopd(inode->i_sb)->hidden_mnt,
+-						  hidden_flags);
++						  hidden_flags, file->f_cred);
+ 			if (IS_ERR(hidden_file)) {
+ 				err = PTR_ERR(hidden_file);
+ 				dput(hidden_dentry);
+@@ -479,7 +479,7 @@ mini_fo_open(inode_t *inode, file_t *fil
+ 			mntget(stopd(inode->i_sb)->hidden_mnt);
+ 			hidden_file = dentry_open(hidden_dentry,
+ 						  stopd(inode->i_sb)->hidden_mnt,
+-						  hidden_flags);
++						  hidden_flags, file->f_cred);
+ 			if (IS_ERR(hidden_file)) {
+ 				err = PTR_ERR(hidden_file);
+ 				dput(hidden_dentry);
+@@ -512,7 +512,7 @@ mini_fo_open(inode_t *inode, file_t *fil
+ 	mntget(stopd(inode->i_sb)->hidden_mnt2);
+ 	hidden_sto_file = dentry_open(hidden_sto_dentry,
+ 				      stopd(inode->i_sb)->hidden_mnt2,
+-				      hidden_flags);
++				      hidden_flags, file->f_cred);
+ 
+ 	/* dentry_open dputs the dentry if it fails */
+ 	if (IS_ERR(hidden_sto_file)) {
+--- a/fs/mini_fo/meta.c
++++ b/fs/mini_fo/meta.c
+@@ -56,7 +56,7 @@ int meta_build_lists(dentry_t *dentry)
+ 
+ 
+ 		/* open META-file for reading */
+-		meta_file = dentry_open(meta_dentry, meta_mnt, 0x0);
++		meta_file = dentry_open(meta_dentry, meta_mnt, 0x0, current_cred());
+ 		if(!meta_file || IS_ERR(meta_file)) {
+ 			printk(KERN_CRIT "mini_fo: meta_build_lists: \
+                                           ERROR opening META file.\n");
+@@ -448,7 +448,7 @@ int meta_write_d_entry(dentry_t *dentry,
+ 	mntget(meta_mnt);
+ 
+         /* open META-file for writing */
+-        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1, current_cred());
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
+                                   ERROR opening meta file.\n");
+@@ -546,7 +546,7 @@ int meta_write_r_entry(dentry_t *dentry,
+ 	mntget(meta_mnt);
+ 
+         /* open META-file for writing */
+-        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1, current_cred());
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_write_r_entry: \
+                                   ERROR opening meta file.\n");
+@@ -686,7 +686,7 @@ int meta_sync_d_list(dentry_t *dentry, i
+ 	mntget(meta_mnt);
+ 
+         /* open META-file for writing */
+-        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1, current_cred());
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
+                                   ERROR opening meta file.\n");
+@@ -828,7 +828,7 @@ int meta_sync_r_list(dentry_t *dentry, i
+ 	mntget(meta_mnt);
+ 
+         /* open META-file for writing */
+-        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1, current_cred());
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
+                                   ERROR opening meta file.\n");
diff --git a/target/linux/generic/patches-2.6.32/215-mini_fo_2.6.30.patch b/target/linux/generic/patches-2.6.32/215-mini_fo_2.6.30.patch
new file mode 100644
index 0000000000..2d20920614
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/215-mini_fo_2.6.30.patch
@@ -0,0 +1,157 @@
+--- a/fs/mini_fo/aux.c
++++ b/fs/mini_fo/aux.c
+@@ -86,8 +86,10 @@ int get_neg_sto_dentry(dentry_t *dentry)
+ 	len = dentry->d_name.len;
+ 	name = dentry->d_name.name;
+ 
++	mutex_lock(&dtohd2(dentry->d_parent)->d_inode->i_mutex);
+ 	dtohd2(dentry) =
+ 		lookup_one_len(name, dtohd2(dentry->d_parent), len);
++	mutex_unlock(&dtohd2(dentry->d_parent)->d_inode->i_mutex);
+ 
+  out:
+ 	return err;
+@@ -426,7 +428,9 @@ int build_sto_structure(dentry_t *dir, d
+ 		const unsigned char *name;
+ 		len = dtohd(dentry)->d_name.len;
+ 		name = dtohd(dentry)->d_name.name;
++		mutex_lock(&dtohd2(dir)->d_inode->i_mutex);
+ 		hidden_sto_dentry = lookup_one_len(name, dtohd2(dir), len);
++		mutex_unlock(&dtohd2(dir)->d_inode->i_mutex);
+ 		dtohd2(dentry) = hidden_sto_dentry;
+ 	}
+ 
+--- a/fs/mini_fo/inode.c
++++ b/fs/mini_fo/inode.c
+@@ -113,17 +113,23 @@ mini_fo_lookup(inode_t *dir, dentry_t *d
+ 		hidden_dir_dentry = hidden_dentry->d_parent;
+ 		kfree(bpath);
+ 	}
+-	else if(hidden_dir_dentry && hidden_dir_dentry->d_inode)
++	else if(hidden_dir_dentry && hidden_dir_dentry->d_inode) {
++		mutex_lock(&hidden_dir_dentry->d_inode->i_mutex);
+ 		hidden_dentry =
+ 			lookup_one_len(name, hidden_dir_dentry, namelen);
+-	else
++		mutex_unlock(&hidden_dir_dentry->d_inode->i_mutex);
++	} else {
+ 		hidden_dentry = NULL;
++	}
+ 
+-	if(hidden_sto_dir_dentry && hidden_sto_dir_dentry->d_inode)
++	if(hidden_sto_dir_dentry && hidden_sto_dir_dentry->d_inode) {
++		mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
+ 		hidden_sto_dentry =
+ 			lookup_one_len(name, hidden_sto_dir_dentry, namelen);
+-	else
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++	} else {
+ 		hidden_sto_dentry =  NULL;
++	}
+ 
+ 	/* catch error in lookup */
+ 	if (IS_ERR(hidden_dentry) || IS_ERR(hidden_sto_dentry)) {
+@@ -553,9 +559,11 @@ mini_fo_rmdir(inode_t *dir, dentry_t *de
+ #endif
+ 
+ 		/* Delete an old WOL file contained in the storage dir */
++		mutex_lock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		meta_dentry = lookup_one_len(META_FILENAME,
+ 					     hidden_sto_dentry,
+ 					     strlen(META_FILENAME));
++		mutex_unlock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		if(meta_dentry->d_inode) {
+ 			err = vfs_unlink(hidden_sto_dentry->d_inode, meta_dentry);
+ 			dput(meta_dentry);
+@@ -643,9 +651,11 @@ mini_fo_rmdir(inode_t *dir, dentry_t *de
+ #endif
+ 
+ 		/* Delete an old WOL file contained in the storage dir */
++		mutex_lock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		meta_dentry = lookup_one_len(META_FILENAME,
+ 					     hidden_sto_dentry,
+ 					     strlen(META_FILENAME));
++		mutex_unlock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		if(meta_dentry->d_inode) {
+ 			/* is this necessary? dget(meta_dentry); */
+ 			err = vfs_unlink(hidden_sto_dentry->d_inode,
+@@ -688,9 +698,11 @@ mini_fo_rmdir(inode_t *dir, dentry_t *de
+ #endif
+ 
+ 		/* Delete an old WOL file contained in the storage dir */
++		mutex_lock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		meta_dentry = lookup_one_len(META_FILENAME,
+ 					     hidden_sto_dentry,
+ 					     strlen(META_FILENAME));
++		mutex_unlock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		if(meta_dentry->d_inode) {
+ 			/* is this necessary? dget(meta_dentry); */
+ 			err = vfs_unlink(hidden_sto_dentry->d_inode,
+--- a/fs/mini_fo/meta.c
++++ b/fs/mini_fo/meta.c
+@@ -43,9 +43,11 @@ int meta_build_lists(dentry_t *dentry)
+ 
+   	/* might there be a META-file? */
+ 	if(dtohd2(dentry) && dtohd2(dentry)->d_inode) {
++		mutex_lock(&dtohd2(dentry)->d_inode->i_mutex);
+ 		meta_dentry = lookup_one_len(META_FILENAME,
+ 					     dtohd2(dentry),
+ 					     strlen(META_FILENAME));
++		mutex_unlock(&dtohd2(dentry)->d_inode->i_mutex);
+ 		if(!meta_dentry->d_inode) {
+ 			dput(meta_dentry);
+ 			goto out_ok;
+@@ -426,8 +428,11 @@ int meta_write_d_entry(dentry_t *dentry,
+ 			goto out;
+                 }
+         }
++
++	mutex_lock(&dtohd2(dentry)->d_inode->i_mutex);
+ 	meta_dentry = lookup_one_len(META_FILENAME,
+ 				     dtohd2(dentry), strlen (META_FILENAME));
++	mutex_unlock(&dtohd2(dentry)->d_inode->i_mutex);
+ 
+ 	/* We need to create a META-file */
+         if(!meta_dentry->d_inode) {
+@@ -527,9 +532,13 @@ int meta_write_r_entry(dentry_t *dentry,
+ 			goto out;
+                 }
+         }
++
++	mutex_lock(&dtohd2(dentry)->d_inode->i_mutex);
+ 	meta_dentry = lookup_one_len(META_FILENAME,
+ 				     dtohd2(dentry),
+ 				     strlen (META_FILENAME));
++	mutex_unlock(&dtohd2(dentry)->d_inode->i_mutex);
++
+         if(!meta_dentry->d_inode) {
+                 /* We need to create a META-file */
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+@@ -641,9 +650,13 @@ int meta_sync_d_list(dentry_t *dentry, i
+ 			goto out;
+                 }
+         }
++
++	mutex_lock(&dtohd2(dentry)->d_inode->i_mutex);
+ 	meta_dentry = lookup_one_len(META_FILENAME,
+ 				     dtohd2(dentry),
+ 				     strlen(META_FILENAME));
++	mutex_unlock(&dtohd2(dentry)->d_inode->i_mutex);
++
+         if(!meta_dentry->d_inode) {
+                 /* We need to create a META-file */
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+@@ -784,9 +797,13 @@ int meta_sync_r_list(dentry_t *dentry, i
+ 			goto out;
+                 }
+         }
++
++	mutex_lock(&dtohd2(dentry)->d_inode->i_mutex);
+ 	meta_dentry = lookup_one_len(META_FILENAME,
+ 				     dtohd2(dentry),
+ 				     strlen(META_FILENAME));
++	mutex_unlock(&dtohd2(dentry)->d_inode->i_mutex);
++
+         if(!meta_dentry->d_inode) {
+                 /* We need to create a META-file */
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
diff --git a/target/linux/generic/patches-2.6.32/216-mini_fo_locking.patch b/target/linux/generic/patches-2.6.32/216-mini_fo_locking.patch
new file mode 100644
index 0000000000..4f075920fb
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/216-mini_fo_locking.patch
@@ -0,0 +1,25 @@
+--- a/fs/mini_fo/state.c
++++ b/fs/mini_fo/state.c
+@@ -537,17 +537,17 @@ int nondir_mod_to_del(dentry_t *dentry)
+ 	dtohd(dentry) = NULL;
+ 	dtost(dentry) = DELETED;
+ 
+-	/* add deleted file to META-file */
+-	meta_add_d_entry(dentry->d_parent,
+-			 dentry->d_name.name,
+-			 dentry->d_name.len);
+-
+ 	/* was: unlock_dir(hidden_sto_dir_dentry); */
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
+ 	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
+ #else
+ 	up(&hidden_sto_dir_dentry->d_inode->i_sem);
+ #endif
++	/* add deleted file to META-file */
++	meta_add_d_entry(dentry->d_parent,
++			 dentry->d_name.name,
++			 dentry->d_name.len);
++
+ 	dput(hidden_sto_dir_dentry);
+ 
+  out:
diff --git a/target/linux/generic/patches-2.6.32/219-kobject_uevent.patch b/target/linux/generic/patches-2.6.32/219-kobject_uevent.patch
new file mode 100644
index 0000000000..7e00b224cc
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/219-kobject_uevent.patch
@@ -0,0 +1,42 @@
+--- a/lib/kobject_uevent.c
++++ b/lib/kobject_uevent.c
+@@ -29,7 +29,8 @@ u64 uevent_seqnum;
+ char uevent_helper[UEVENT_HELPER_PATH_LEN] = CONFIG_UEVENT_HELPER_PATH;
+ static DEFINE_SPINLOCK(sequence_lock);
+ #if defined(CONFIG_NET)
+-static struct sock *uevent_sock;
++struct sock *uevent_sock = NULL;
++EXPORT_SYMBOL_GPL(uevent_sock);
+ #endif
+ 
+ /* the strings here must match the enum in include/linux/kobject.h */
+@@ -42,6 +43,18 @@ static const char *kobject_actions[] = {
+ 	[KOBJ_OFFLINE] =	"offline",
+ };
+ 
++u64 uevent_next_seqnum(void)
++{
++	u64 seq;
++
++	spin_lock(&sequence_lock);
++	seq = ++uevent_seqnum;
++	spin_unlock(&sequence_lock);
++
++	return seq;
++}
++EXPORT_SYMBOL_GPL(uevent_next_seqnum);
++
+ /**
+  * kobject_action_type - translate action string to numeric type
+  *
+@@ -201,9 +214,7 @@ int kobject_uevent_env(struct kobject *k
+ 		kobj->state_remove_uevent_sent = 1;
+ 
+ 	/* we will send an event, so request a new sequence number */
+-	spin_lock(&sequence_lock);
+-	seq = ++uevent_seqnum;
+-	spin_unlock(&sequence_lock);
++	seq = uevent_next_seqnum();
+ 	retval = add_uevent_var(env, "SEQNUM=%llu", (unsigned long long)seq);
+ 	if (retval)
+ 		goto exit;
diff --git a/target/linux/generic/patches-2.6.32/220-sound_kconfig.patch b/target/linux/generic/patches-2.6.32/220-sound_kconfig.patch
new file mode 100644
index 0000000000..f374009a65
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/220-sound_kconfig.patch
@@ -0,0 +1,11 @@
+--- a/sound/core/Kconfig
++++ b/sound/core/Kconfig
+@@ -7,7 +7,7 @@ config SND_PCM
+ 	select SND_TIMER
+ 
+ config SND_HWDEP
+-	tristate
++	tristate "Sound hardware support"
+ 
+ config SND_RAWMIDI
+ 	tristate
diff --git a/target/linux/generic/patches-2.6.32/221-binfmt_elf_gcc4.1.patch b/target/linux/generic/patches-2.6.32/221-binfmt_elf_gcc4.1.patch
new file mode 100644
index 0000000000..694737e408
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/221-binfmt_elf_gcc4.1.patch
@@ -0,0 +1,11 @@
+--- a/fs/binfmt_elf.c
++++ b/fs/binfmt_elf.c
+@@ -1170,7 +1170,7 @@ static unsigned long vma_dump_size(struc
+ 	if (FILTER(ELF_HEADERS) &&
+ 	    vma->vm_pgoff == 0 && (vma->vm_flags & VM_READ)) {
+ 		u32 __user *header = (u32 __user *) vma->vm_start;
+-		u32 word;
++		u32 word = 0;
+ 		mm_segment_t fs = get_fs();
+ 		/*
+ 		 * Doing it this way gets the constant folded by GCC.
diff --git a/target/linux/generic/patches-2.6.32/222-partial_eraseblock_write.patch b/target/linux/generic/patches-2.6.32/222-partial_eraseblock_write.patch
new file mode 100644
index 0000000000..0c7672e8be
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/222-partial_eraseblock_write.patch
@@ -0,0 +1,146 @@
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -21,6 +21,8 @@
+ #include <linux/root_dev.h>
+ #include <linux/magic.h>
+ 
++#define MTD_ERASE_PARTIAL	0x8000 /* partition only covers parts of an erase block */
++
+ /* Our partition linked list */
+ static LIST_HEAD(mtd_partitions);
+ 
+@@ -226,13 +228,60 @@ static int part_erase(struct mtd_info *m
+ 		return -EROFS;
+ 	if (instr->addr >= mtd->size)
+ 		return -EINVAL;
++
++	instr->partial_start = false;
++	if (mtd->flags & MTD_ERASE_PARTIAL) {
++		size_t readlen = 0;
++		u64 mtd_ofs;
++
++		instr->erase_buf = kmalloc(part->master->erasesize, GFP_ATOMIC);
++		if (!instr->erase_buf)
++			return -ENOMEM;
++
++		mtd_ofs = part->offset + instr->addr;
++		instr->erase_buf_ofs = do_div(mtd_ofs, part->master->erasesize);
++
++		if (instr->erase_buf_ofs > 0) {
++			instr->addr -= instr->erase_buf_ofs;
++			ret = part->master->read(part->master,
++				instr->addr + part->offset,
++				part->master->erasesize,
++				&readlen, instr->erase_buf);
++
++			instr->partial_start = true;
++		} else {
++			mtd_ofs = part->offset + part->mtd.size;
++			instr->erase_buf_ofs = part->master->erasesize -
++				do_div(mtd_ofs, part->master->erasesize);
++
++			if (instr->erase_buf_ofs > 0) {
++				instr->len += instr->erase_buf_ofs;
++				ret = part->master->read(part->master,
++					part->offset + instr->addr +
++					instr->len - part->master->erasesize,
++					part->master->erasesize, &readlen,
++					instr->erase_buf);
++			} else {
++				ret = 0;
++			}
++		}
++		if (ret < 0) {
++			kfree(instr->erase_buf);
++			return ret;
++		}
++
++	}
++
+ 	instr->addr += part->offset;
+ 	ret = part->master->erase(part->master, instr);
+ 	if (ret) {
+ 		if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
+ 			instr->fail_addr -= part->offset;
+ 		instr->addr -= part->offset;
++		if (mtd->flags & MTD_ERASE_PARTIAL)
++			kfree(instr->erase_buf);
+ 	}
++
+ 	return ret;
+ }
+ 
+@@ -240,7 +289,25 @@ void mtd_erase_callback(struct erase_inf
+ {
+ 	if (instr->mtd->erase == part_erase) {
+ 		struct mtd_part *part = PART(instr->mtd);
++		size_t wrlen = 0;
+ 
++		if (instr->mtd->flags & MTD_ERASE_PARTIAL) {
++			if (instr->partial_start) {
++				part->master->write(part->master,
++					instr->addr, instr->erase_buf_ofs,
++					&wrlen, instr->erase_buf);
++				instr->addr += instr->erase_buf_ofs;
++			} else {
++				instr->len -= instr->erase_buf_ofs;
++				part->master->write(part->master,
++					instr->addr + instr->len,
++					instr->erase_buf_ofs, &wrlen,
++					instr->erase_buf +
++					part->master->erasesize -
++					instr->erase_buf_ofs);
++			}
++			kfree(instr->erase_buf);
++		}
+ 		if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
+ 			instr->fail_addr -= part->offset;
+ 		instr->addr -= part->offset;
+@@ -473,18 +540,24 @@ static struct mtd_part *add_one_partitio
+ 	if ((slave->mtd.flags & MTD_WRITEABLE) &&
+ 	    mtd_mod_by_eb(slave->offset, &slave->mtd)) {
+ 		/* Doesn't start on a boundary of major erase size */
+-		/* FIXME: Let it be writable if it is on a boundary of
+-		 * _minor_ erase size though */
+-		slave->mtd.flags &= ~MTD_WRITEABLE;
+-		printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
+-			part->name);
++		slave->mtd.flags |= MTD_ERASE_PARTIAL;
++		if (((u32) slave->mtd.size) > master->erasesize)
++			slave->mtd.flags &= ~MTD_WRITEABLE;
++		else
++			slave->mtd.erasesize = slave->mtd.size;
+ 	}
+ 	if ((slave->mtd.flags & MTD_WRITEABLE) &&
+-	    mtd_mod_by_eb(slave->mtd.size, &slave->mtd)) {
+-		slave->mtd.flags &= ~MTD_WRITEABLE;
+-		printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
+-			part->name);
+-	}
++	    mtd_mod_by_eb(slave->offset + slave->mtd.size, &slave->mtd)) {
++		slave->mtd.flags |= MTD_ERASE_PARTIAL;
++
++		if ((u32) slave->mtd.size > master->erasesize)
++			slave->mtd.flags &= ~MTD_WRITEABLE;
++		else
++			slave->mtd.erasesize = slave->mtd.size;
++	}
++	if ((slave->mtd.flags & (MTD_ERASE_PARTIAL|MTD_WRITEABLE)) == MTD_ERASE_PARTIAL)
++		printk(KERN_WARNING"mtd: partition \"%s\" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only\n",
++				part->name);
+ 
+ 	slave->mtd.ecclayout = master->ecclayout;
+ 	if (master->block_isbad) {
+--- a/include/linux/mtd/mtd.h
++++ b/include/linux/mtd/mtd.h
+@@ -46,6 +46,10 @@ struct erase_info {
+ 	u_long priv;
+ 	u_char state;
+ 	struct erase_info *next;
++
++	u8 *erase_buf;
++	u32 erase_buf_ofs;
++	bool partial_start;
+ };
+ 
+ struct mtd_erase_region_info {
diff --git a/target/linux/generic/patches-2.6.32/240-packet_socket_type.patch b/target/linux/generic/patches-2.6.32/240-packet_socket_type.patch
new file mode 100644
index 0000000000..864f5733ac
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/240-packet_socket_type.patch
@@ -0,0 +1,132 @@
+This patch allows the user to specify desired packet types (outgoing,
+broadcast, unicast, etc.) on packet sockets via setsockopt.
+This can reduce the load in situations where only a limited number
+of packet types are necessary
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+
+--- a/include/linux/if_packet.h
++++ b/include/linux/if_packet.h
+@@ -31,6 +31,8 @@ struct sockaddr_ll
+ /* These ones are invisible by user level */
+ #define PACKET_LOOPBACK		5		/* MC/BRD frame looped back */
+ #define PACKET_FASTROUTE	6		/* Fastrouted frame	*/
++#define PACKET_MASK_ANY		0xffffffff	/* mask for packet type bits */
++
+ 
+ /* Packet socket options */
+ 
+@@ -48,6 +50,7 @@ struct sockaddr_ll
+ #define PACKET_RESERVE			12
+ #define PACKET_TX_RING			13
+ #define PACKET_LOSS			14
++#define PACKET_RECV_TYPE		15
+ 
+ struct tpacket_stats
+ {
+--- a/net/packet/af_packet.c
++++ b/net/packet/af_packet.c
+@@ -204,6 +204,7 @@ struct packet_sock {
+ 	unsigned int		tp_reserve;
+ 	unsigned int		tp_loss:1;
+ #endif
++	unsigned int		pkt_type;
+ };
+ 
+ struct packet_skb_cb {
+@@ -342,6 +343,7 @@ static int packet_rcv_spkt(struct sk_buf
+ {
+ 	struct sock *sk;
+ 	struct sockaddr_pkt *spkt;
++	struct packet_sock *po;
+ 
+ 	/*
+ 	 *	When we registered the protocol we saved the socket in the data
+@@ -349,6 +351,7 @@ static int packet_rcv_spkt(struct sk_buf
+ 	 */
+ 
+ 	sk = pt->af_packet_priv;
++	po = pkt_sk(sk);
+ 
+ 	/*
+ 	 *	Yank back the headers [hope the device set this
+@@ -361,7 +364,7 @@ static int packet_rcv_spkt(struct sk_buf
+ 	 *	so that this procedure is noop.
+ 	 */
+ 
+-	if (skb->pkt_type == PACKET_LOOPBACK)
++	if (!(po->pkt_type & (1 << skb->pkt_type)))
+ 		goto out;
+ 
+ 	if (dev_net(dev) != sock_net(sk))
+@@ -545,12 +548,12 @@ static int packet_rcv(struct sk_buff *sk
+ 	int skb_len = skb->len;
+ 	unsigned int snaplen, res;
+ 
+-	if (skb->pkt_type == PACKET_LOOPBACK)
+-		goto drop;
+-
+ 	sk = pt->af_packet_priv;
+ 	po = pkt_sk(sk);
+ 
++	if (!(po->pkt_type & (1 << skb->pkt_type)))
++		goto drop;
++
+ 	if (dev_net(dev) != sock_net(sk))
+ 		goto drop;
+ 
+@@ -667,12 +670,12 @@ static int tpacket_rcv(struct sk_buff *s
+ 	struct timeval tv;
+ 	struct timespec ts;
+ 
+-	if (skb->pkt_type == PACKET_LOOPBACK)
+-		goto drop;
+-
+ 	sk = pt->af_packet_priv;
+ 	po = pkt_sk(sk);
+ 
++	if (!(po->pkt_type & (1 << skb->pkt_type)))
++		goto drop;
++
+ 	if (dev_net(dev) != sock_net(sk))
+ 		goto drop;
+ 
+@@ -1390,6 +1393,7 @@ static int packet_create(struct net *net
+ 	spin_lock_init(&po->bind_lock);
+ 	mutex_init(&po->pg_vec_lock);
+ 	po->prot_hook.func = packet_rcv;
++	po->pkt_type = PACKET_MASK_ANY & ~(1 << PACKET_LOOPBACK);
+ 
+ 	if (sock->type == SOCK_PACKET)
+ 		po->prot_hook.func = packet_rcv_spkt;
+@@ -1737,6 +1741,16 @@ packet_setsockopt(struct socket *sock, i
+ 			ret = packet_mc_drop(sk, &mreq);
+ 		return ret;
+ 	}
++	case PACKET_RECV_TYPE:
++	{
++		unsigned int val;
++		if (optlen != sizeof(val))
++			return -EINVAL;
++		if (copy_from_user(&val, optval, sizeof(val)))
++			return -EFAULT;
++		po->pkt_type = val & ~PACKET_LOOPBACK;
++		return 0;
++	}
+ 
+ #ifdef CONFIG_PACKET_MMAP
+ 	case PACKET_RX_RING:
+@@ -1882,6 +1896,13 @@ static int packet_getsockopt(struct sock
+ 
+ 		data = &val;
+ 		break;
++	case PACKET_RECV_TYPE:
++		if (len > sizeof(unsigned int))
++			len = sizeof(unsigned int);
++		val = po->pkt_type;
++
++		data = &val;
++		break;
+ #ifdef CONFIG_PACKET_MMAP
+ 	case PACKET_VERSION:
+ 		if (len > sizeof(int))
diff --git a/target/linux/generic/patches-2.6.32/250-pppoe_header_pad.patch b/target/linux/generic/patches-2.6.32/250-pppoe_header_pad.patch
new file mode 100644
index 0000000000..042546f317
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/250-pppoe_header_pad.patch
@@ -0,0 +1,20 @@
+--- a/drivers/net/pppoe.c
++++ b/drivers/net/pppoe.c
+@@ -863,7 +863,7 @@ static int pppoe_sendmsg(struct kiocb *i
+ 		goto end;
+ 
+ 
+-	skb = sock_wmalloc(sk, total_len + dev->hard_header_len + 32,
++	skb = sock_wmalloc(sk, total_len + dev->hard_header_len + 32 + NET_SKB_PAD,
+ 			   0, GFP_KERNEL);
+ 	if (!skb) {
+ 		error = -ENOMEM;
+@@ -871,7 +871,7 @@ static int pppoe_sendmsg(struct kiocb *i
+ 	}
+ 
+ 	/* Reserve space for headers. */
+-	skb_reserve(skb, dev->hard_header_len);
++	skb_reserve(skb, dev->hard_header_len + NET_SKB_PAD);
+ 	skb_reset_network_header(skb);
+ 
+ 	skb->dev = dev;
diff --git a/target/linux/generic/patches-2.6.32/260-crypto_optional_tests.patch b/target/linux/generic/patches-2.6.32/260-crypto_optional_tests.patch
new file mode 100644
index 0000000000..0808c778e9
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/260-crypto_optional_tests.patch
@@ -0,0 +1,63 @@
+--- a/crypto/Kconfig
++++ b/crypto/Kconfig
+@@ -96,6 +96,10 @@ config CRYPTO_MANAGER2
+ 	select CRYPTO_BLKCIPHER2
+ 	select CRYPTO_PCOMP
+ 
++config CRYPTO_MANAGER_NO_TESTS
++	bool "Disable internal testsuite to save space"
++	depends on CRYPTO_MANAGER
++
+ config CRYPTO_GF128MUL
+ 	tristate "GF(2^128) multiplication functions (EXPERIMENTAL)"
+ 	depends on EXPERIMENTAL
+--- a/crypto/testmgr.c
++++ b/crypto/testmgr.c
+@@ -47,6 +47,8 @@
+ #define ENCRYPT 1
+ #define DECRYPT 0
+ 
++#ifndef CONFIG_CRYPTO_MANAGER_NO_TESTS
++
+ struct tcrypt_result {
+ 	struct completion completion;
+ 	int err;
+@@ -2350,8 +2352,11 @@ static int alg_find_test(const char *alg
+ 	return -1;
+ }
+ 
++#endif /* CONFIG_CRYPTO_MANAGER_NO_TESTS */
++
+ int alg_test(const char *driver, const char *alg, u32 type, u32 mask)
+ {
++#ifndef CONFIG_CRYPTO_MANAGER_NO_TESTS
+ 	int i;
+ 	int j;
+ 	int rc;
+@@ -2406,5 +2411,8 @@ notest:
+ 	return 0;
+ non_fips_alg:
+ 	return -EINVAL;
++#else /* CONFIG_CRYPTO_MANAGER_NO_TESTS */
++	return 0;
++#endif /* CONFIG_CRYPTO_MANAGER_NO_TESTS */
+ }
+ EXPORT_SYMBOL_GPL(alg_test);
+--- a/crypto/testmgr.h
++++ b/crypto/testmgr.h
+@@ -20,6 +20,8 @@
+ 
+ #include <crypto/compress.h>
+ 
++#ifndef CONFIG_CRYPTO_MANAGER_NO_TESTS
++
+ #define MAX_DIGEST_SIZE		64
+ #define MAX_TAP			8
+ 
+@@ -9537,4 +9539,6 @@ static struct hash_testvec crc32c_tv_tem
+ 	},
+ };
+ 
++#endif /* CONFIG_CRYPTO_MANAGER_NO_TESTS */
++
+ #endif	/* _CRYPTO_TESTMGR_H */
diff --git a/target/linux/generic/patches-2.6.32/400-ledtrig_morse.patch b/target/linux/generic/patches-2.6.32/400-ledtrig_morse.patch
new file mode 100644
index 0000000000..1892eb5bd9
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/400-ledtrig_morse.patch
@@ -0,0 +1,18 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -304,4 +304,8 @@ config LEDS_TRIGGER_DEFAULT_ON
+ comment "iptables trigger is under Netfilter config (LED target)"
+ 	depends on LEDS_TRIGGERS
+ 
++config LEDS_TRIGGER_MORSE
++	tristate "LED Morse Trigger"
++	depends on LEDS_TRIGGERS
++
+ endif # NEW_LEDS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -40,3 +40,4 @@ obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT)	+= 
+ obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT)	+= ledtrig-backlight.o
+ obj-$(CONFIG_LEDS_TRIGGER_GPIO)		+= ledtrig-gpio.o
+ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
++obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o
diff --git a/target/linux/generic/patches-2.6.32/402-ledtrig_netdev.patch b/target/linux/generic/patches-2.6.32/402-ledtrig_netdev.patch
new file mode 100644
index 0000000000..11a9c9b1ea
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/402-ledtrig_netdev.patch
@@ -0,0 +1,21 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -308,4 +308,11 @@ config LEDS_TRIGGER_MORSE
+ 	tristate "LED Morse Trigger"
+ 	depends on LEDS_TRIGGERS
+ 
++config LEDS_TRIGGER_NETDEV
++	tristate "LED Netdev Trigger"
++	depends on NET && LEDS_TRIGGERS
++	help
++	  This allows LEDs to be controlled by network device activity.
++	  If unsure, say Y.
++
+ endif # NEW_LEDS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -41,3 +41,4 @@ obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT)	+=
+ obj-$(CONFIG_LEDS_TRIGGER_GPIO)		+= ledtrig-gpio.o
+ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
+ obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o
++obj-$(CONFIG_LEDS_TRIGGER_NETDEV)      += ledtrig-netdev.o
diff --git a/target/linux/generic/patches-2.6.32/410-gpio_buttons.patch b/target/linux/generic/patches-2.6.32/410-gpio_buttons.patch
new file mode 100644
index 0000000000..41f52afea4
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/410-gpio_buttons.patch
@@ -0,0 +1,31 @@
+--- a/drivers/input/misc/Kconfig
++++ b/drivers/input/misc/Kconfig
+@@ -317,4 +317,20 @@ config INPUT_PCAP
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called pcap_keys.
+ 
++config INPUT_GPIO_BUTTONS
++	tristate "Polled GPIO buttons interface"
++	depends on GENERIC_GPIO
++	select INPUT_POLLDEV
++	help
++	  This driver implements support for buttons connected
++	  to GPIO pins of various CPUs (and some other chips).
++
++	  Say Y here if your device has buttons connected
++	  directly to such GPIO pins.  Your board-specific
++	  setup logic must also provide a platform device,
++	  with configuration data saying which GPIOs are used.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called gpio-buttons.
++
+ endif
+--- a/drivers/input/misc/Makefile
++++ b/drivers/input/misc/Makefile
+@@ -30,4 +30,5 @@ obj-$(CONFIG_INPUT_WINBOND_CIR)		+= winb
+ obj-$(CONFIG_INPUT_WISTRON_BTNS)	+= wistron_btns.o
+ obj-$(CONFIG_INPUT_WM831X_ON)		+= wm831x-on.o
+ obj-$(CONFIG_INPUT_YEALINK)		+= yealink.o
++obj-$(CONFIG_INPUT_GPIO_BUTTONS)	+= gpio_buttons.o
+ 
diff --git a/target/linux/generic/patches-2.6.32/411-add-KEY_WPS_BUTTON-definition.patch b/target/linux/generic/patches-2.6.32/411-add-KEY_WPS_BUTTON-definition.patch
new file mode 100644
index 0000000000..c78874a380
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/411-add-KEY_WPS_BUTTON-definition.patch
@@ -0,0 +1,26 @@
+From 492d4f25416528ffb900e6edf0fd70eafd098cfc Mon Sep 17 00:00:00 2001
+From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
+Date: Fri, 26 Feb 2010 00:16:05 -0800
+Subject: [PATCH] Input: add KEY_WPS_BUTTON definition
+
+The new key definition is supposed to be used for buttons that initiate
+WiFi Protected setup sequence:
+
+	http://en.wikipedia.org/wiki/Wi-Fi_Protected_Setup
+
+Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
+---
+ include/linux/input.h |    1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+--- a/include/linux/input.h
++++ b/include/linux/input.h
+@@ -595,6 +595,8 @@ struct input_absinfo {
+ #define KEY_NUMERIC_STAR	0x20a
+ #define KEY_NUMERIC_POUND	0x20b
+ 
++#define KEY_WPS_BUTTON		0x211	/* WiFi Protected Setup key */
++
+ /* We avoid low common keys in module aliases so they don't get huge. */
+ #define KEY_MIN_INTERESTING	KEY_MUTE
+ #define KEY_MAX			0x2ff
diff --git a/target/linux/generic/patches-2.6.32/420-gpiodev.patch b/target/linux/generic/patches-2.6.32/420-gpiodev.patch
new file mode 100644
index 0000000000..7e4b85b25b
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/420-gpiodev.patch
@@ -0,0 +1,27 @@
+--- a/drivers/char/Kconfig
++++ b/drivers/char/Kconfig
+@@ -1029,6 +1029,14 @@ config CS5535_GPIO
+ 
+ 	  If compiled as a module, it will be called cs5535_gpio.
+ 
++config GPIO_DEVICE
++	tristate "GPIO device support"
++	depends on GENERIC_GPIO
++	help
++	  Say Y to enable Linux GPIO device support.  This allows control of
++	  GPIO pins using a character device
++
++
+ config RAW_DRIVER
+ 	tristate "RAW driver (/dev/raw/rawN)"
+ 	depends on BLOCK
+--- a/drivers/char/Makefile
++++ b/drivers/char/Makefile
+@@ -96,6 +96,7 @@ obj-$(CONFIG_SCx200_GPIO)	+= scx200_gpio
+ obj-$(CONFIG_PC8736x_GPIO)	+= pc8736x_gpio.o
+ obj-$(CONFIG_NSC_GPIO)		+= nsc_gpio.o
+ obj-$(CONFIG_CS5535_GPIO)	+= cs5535_gpio.o
++obj-$(CONFIG_GPIO_DEVICE)	+= gpio_dev.o
+ obj-$(CONFIG_GPIO_TB0219)	+= tb0219.o
+ obj-$(CONFIG_TELCLOCK)		+= tlclk.o
+ 
diff --git a/target/linux/generic/patches-2.6.32/430-scsi_header_fix.patch b/target/linux/generic/patches-2.6.32/430-scsi_header_fix.patch
new file mode 100644
index 0000000000..adbd383914
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/430-scsi_header_fix.patch
@@ -0,0 +1,17 @@
+--- a/include/scsi/scsi.h
++++ b/include/scsi/scsi.h
+@@ -145,10 +145,10 @@ struct scsi_cmnd;
+ 
+ /* defined in T10 SCSI Primary Commands-2 (SPC2) */
+ struct scsi_varlen_cdb_hdr {
+-	u8 opcode;        /* opcode always == VARIABLE_LENGTH_CMD */
+-	u8 control;
+-	u8 misc[5];
+-	u8 additional_cdb_length;         /* total cdb length - 8 */
++	__u8 opcode;        /* opcode always == VARIABLE_LENGTH_CMD */
++	__u8 control;
++	__u8 misc[5];
++	__u8 additional_cdb_length;         /* total cdb length - 8 */
+ 	__be16 service_action;
+ 	/* service specific data follows */
+ };
diff --git a/target/linux/generic/patches-2.6.32/510-yaffs_support.patch b/target/linux/generic/patches-2.6.32/510-yaffs_support.patch
new file mode 100644
index 0000000000..e490452e58
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/510-yaffs_support.patch
@@ -0,0 +1,17 @@
+--- a/fs/Kconfig
++++ b/fs/Kconfig
+@@ -44,6 +44,7 @@ source "fs/gfs2/Kconfig"
+ source "fs/ocfs2/Kconfig"
+ source "fs/btrfs/Kconfig"
+ source "fs/nilfs2/Kconfig"
++source "fs/yaffs2/Kconfig"
+ 
+ endif # BLOCK
+ 
+--- a/fs/Makefile
++++ b/fs/Makefile
+@@ -125,3 +125,4 @@ obj-$(CONFIG_OCFS2_FS)		+= ocfs2/
+ obj-$(CONFIG_BTRFS_FS)		+= btrfs/
+ obj-$(CONFIG_GFS2_FS)           += gfs2/
+ obj-$(CONFIG_EXOFS_FS)          += exofs/
++obj-$(CONFIG_YAFFS_FS)		+= yaffs2/
diff --git a/target/linux/generic/patches-2.6.32/511-yaffs-cvs-2009-04-24.patch b/target/linux/generic/patches-2.6.32/511-yaffs-cvs-2009-04-24.patch
new file mode 100644
index 0000000000..5c70e79a05
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/511-yaffs-cvs-2009-04-24.patch
@@ -0,0 +1,12344 @@
+--- a/fs/yaffs2/devextras.h
++++ b/fs/yaffs2/devextras.h
+@@ -14,194 +14,135 @@
+  */
+ 
+ /*
+- * This file is just holds extra declarations used during development.
+- * Most of these are from kernel includes placed here so we can use them in
+- * applications.
++ * This file is just holds extra declarations of macros that would normally
++ * be providesd in the Linux kernel. These macros have been written from
++ * scratch but are functionally equivalent to the Linux ones.
+  *
+  */
+ 
+ #ifndef __EXTRAS_H__
+ #define __EXTRAS_H__
+ 
+-#if defined WIN32
+-#define __inline__ __inline
+-#define new newHack
+-#endif
+-
+-#if !(defined __KERNEL__) || (defined WIN32)
+ 
+-/* User space defines */
++#if !(defined __KERNEL__)
+ 
++/* Definition of types */
+ typedef unsigned char __u8;
+ typedef unsigned short __u16;
+ typedef unsigned __u32;
+ 
++#endif
++
+ /*
+- * Simple doubly linked list implementation.
+- *
+- * Some of the internal functions ("__xxx") are useful when
+- * manipulating whole lists rather than single entries, as
+- * sometimes we already know the next/prev entries and we can
+- * generate better code by using them directly rather than
+- * using the generic single-entry routines.
++ * This is a simple doubly linked list implementation that matches the
++ * way the Linux kernel doubly linked list implementation works.
+  */
+ 
+-#define prefetch(x) 1
+-
+-struct list_head {
+-	struct list_head *next, *prev;
++struct ylist_head {
++	struct ylist_head *next; /* next in chain */
++	struct ylist_head *prev; /* previous in chain */
+ };
+ 
+-#define LIST_HEAD_INIT(name) { &(name), &(name) }
+ 
+-#define LIST_HEAD(name) \
+-	struct list_head name = LIST_HEAD_INIT(name)
++/* Initialise a static list */
++#define YLIST_HEAD(name) \
++struct ylist_head name = { &(name), &(name)}
++
+ 
+-#define INIT_LIST_HEAD(ptr) do { \
+-	(ptr)->next = (ptr); (ptr)->prev = (ptr); \
++
++/* Initialise a list head to an empty list */
++#define YINIT_LIST_HEAD(p) \
++do { \
++	(p)->next = (p);\
++	(p)->prev = (p); \
+ } while (0)
+ 
+-/*
+- * Insert a new entry between two known consecutive entries.
+- *
+- * This is only for internal list manipulation where we know
+- * the prev/next entries already!
+- */
+-static __inline__ void __list_add(struct list_head *new,
+-				  struct list_head *prev,
+-				  struct list_head *next)
+-{
+-	next->prev = new;
+-	new->next = next;
+-	new->prev = prev;
+-	prev->next = new;
+-}
+ 
+-/**
+- * list_add - add a new entry
+- * @new: new entry to be added
+- * @head: list head to add it after
+- *
+- * Insert a new entry after the specified head.
+- * This is good for implementing stacks.
+- */
+-static __inline__ void list_add(struct list_head *new, struct list_head *head)
++/* Add an element to a list */
++static __inline__ void ylist_add(struct ylist_head *newEntry,
++				struct ylist_head *list)
+ {
+-	__list_add(new, head, head->next);
+-}
++	struct ylist_head *listNext = list->next;
++
++	list->next = newEntry;
++	newEntry->prev = list;
++	newEntry->next = listNext;
++	listNext->prev = newEntry;
+ 
+-/**
+- * list_add_tail - add a new entry
+- * @new: new entry to be added
+- * @head: list head to add it before
+- *
+- * Insert a new entry before the specified head.
+- * This is useful for implementing queues.
+- */
+-static __inline__ void list_add_tail(struct list_head *new,
+-				     struct list_head *head)
+-{
+-	__list_add(new, head->prev, head);
+ }
+ 
+-/*
+- * Delete a list entry by making the prev/next entries
+- * point to each other.
+- *
+- * This is only for internal list manipulation where we know
+- * the prev/next entries already!
+- */
+-static __inline__ void __list_del(struct list_head *prev,
+-				  struct list_head *next)
++static __inline__ void ylist_add_tail(struct ylist_head *newEntry,
++				 struct ylist_head *list)
+ {
+-	next->prev = prev;
+-	prev->next = next;
++	struct ylist_head *listPrev = list->prev;
++
++	list->prev = newEntry;
++	newEntry->next = list;
++	newEntry->prev = listPrev;
++	listPrev->next = newEntry;
++
+ }
+ 
+-/**
+- * list_del - deletes entry from list.
+- * @entry: the element to delete from the list.
+- * Note: list_empty on entry does not return true after this, the entry is
+- * in an undefined state.
+- */
+-static __inline__ void list_del(struct list_head *entry)
++
++/* Take an element out of its current list, with or without
++ * reinitialising the links.of the entry*/
++static __inline__ void ylist_del(struct ylist_head *entry)
+ {
+-	__list_del(entry->prev, entry->next);
++	struct ylist_head *listNext = entry->next;
++	struct ylist_head *listPrev = entry->prev;
++
++	listNext->prev = listPrev;
++	listPrev->next = listNext;
++
+ }
+ 
+-/**
+- * list_del_init - deletes entry from list and reinitialize it.
+- * @entry: the element to delete from the list.
+- */
+-static __inline__ void list_del_init(struct list_head *entry)
++static __inline__ void ylist_del_init(struct ylist_head *entry)
+ {
+-	__list_del(entry->prev, entry->next);
+-	INIT_LIST_HEAD(entry);
++	ylist_del(entry);
++	entry->next = entry->prev = entry;
+ }
+ 
+-/**
+- * list_empty - tests whether a list is empty
+- * @head: the list to test.
+- */
+-static __inline__ int list_empty(struct list_head *head)
++
++/* Test if the list is empty */
++static __inline__ int ylist_empty(struct ylist_head *entry)
+ {
+-	return head->next == head;
++	return (entry->next == entry);
+ }
+ 
+-/**
+- * list_splice - join two lists
+- * @list: the new list to add.
+- * @head: the place to add it in the first list.
++
++/* ylist_entry takes a pointer to a list entry and offsets it to that
++ * we can find a pointer to the object it is embedded in.
+  */
+-static __inline__ void list_splice(struct list_head *list,
+-				   struct list_head *head)
+-{
+-	struct list_head *first = list->next;
+ 
+-	if (first != list) {
+-		struct list_head *last = list->prev;
+-		struct list_head *at = head->next;
+-
+-		first->prev = head;
+-		head->next = first;
+-
+-		last->next = at;
+-		at->prev = last;
+-	}
+-}
+ 
+-/**
+- * list_entry - get the struct for this entry
+- * @ptr:	the &struct list_head pointer.
+- * @type:	the type of the struct this is embedded in.
+- * @member:	the name of the list_struct within the struct.
+- */
+-#define list_entry(ptr, type, member) \
+-	((type *)((char *)(ptr)-(unsigned long)(&((type *)0)->member)))
+-
+-/**
+- * list_for_each	-	iterate over a list
+- * @pos:	the &struct list_head to use as a loop counter.
+- * @head:	the head for your list.
+- */
+-#define list_for_each(pos, head) \
+-	for (pos = (head)->next, prefetch(pos->next); pos != (head); \
+-        	pos = pos->next, prefetch(pos->next))
+-
+-/**
+- * list_for_each_safe	-	iterate over a list safe against removal
+- *                              of list entry
+- * @pos:	the &struct list_head to use as a loop counter.
+- * @n:		another &struct list_head to use as temporary storage
+- * @head:	the head for your list.
+- */
+-#define list_for_each_safe(pos, n, head) \
+-	for (pos = (head)->next, n = pos->next; pos != (head); \
+-		pos = n, n = pos->next)
++#define ylist_entry(entry, type, member) \
++	((type *)((char *)(entry)-(unsigned long)(&((type *)NULL)->member)))
+ 
+-/*
+- * File types
++
++/* ylist_for_each and list_for_each_safe  iterate over lists.
++ * ylist_for_each_safe uses temporary storage to make the list delete safe
+  */
++
++#define ylist_for_each(itervar, list) \
++	for (itervar = (list)->next; itervar != (list); itervar = itervar->next)
++
++#define ylist_for_each_safe(itervar, saveVar, list) \
++	for (itervar = (list)->next, saveVar = (list)->next->next; \
++		itervar != (list); itervar = saveVar, saveVar = saveVar->next)
++
++
++#if !(defined __KERNEL__)
++
++
++#ifndef WIN32
++#include <sys/stat.h>
++#endif
++
++
++#ifdef CONFIG_YAFFS_PROVIDE_DEFS
++/* File types */
++
++
+ #define DT_UNKNOWN	0
+ #define DT_FIFO		1
+ #define DT_CHR		2
+@@ -212,6 +153,7 @@ static __inline__ void list_splice(struc
+ #define DT_SOCK		12
+ #define DT_WHT		14
+ 
++
+ #ifndef WIN32
+ #include <sys/stat.h>
+ #endif
+@@ -227,10 +169,6 @@ static __inline__ void list_splice(struc
+ #define ATTR_ATIME	16
+ #define ATTR_MTIME	32
+ #define ATTR_CTIME	64
+-#define ATTR_ATIME_SET	128
+-#define ATTR_MTIME_SET	256
+-#define ATTR_FORCE	512	/* Not a change, but a change it */
+-#define ATTR_ATTR_FLAG	1024
+ 
+ struct iattr {
+ 	unsigned int ia_valid;
+@@ -244,21 +182,15 @@ struct iattr {
+ 	unsigned int ia_attr_flags;
+ };
+ 
+-#define KERN_DEBUG
++#endif
+ 
+ #else
+ 
+-#ifndef WIN32
+ #include <linux/types.h>
+-#include <linux/list.h>
+ #include <linux/fs.h>
+ #include <linux/stat.h>
+-#endif
+ 
+ #endif
+ 
+-#if defined WIN32
+-#undef new
+-#endif
+ 
+ #endif
+--- a/fs/yaffs2/Kconfig
++++ b/fs/yaffs2/Kconfig
+@@ -5,7 +5,7 @@
+ config YAFFS_FS
+ 	tristate "YAFFS2 file system support"
+ 	default n
+-	depends on MTD
++	depends on MTD_BLOCK
+ 	select YAFFS_YAFFS1
+ 	select YAFFS_YAFFS2
+ 	help
+@@ -43,7 +43,8 @@ config YAFFS_9BYTE_TAGS
+ 	  format that you need to continue to support.  New data written
+ 	  also uses the older-style format.  Note: Use of this option
+ 	  generally requires that MTD's oob layout be adjusted to use the
+-	  older-style format.  See notes on tags formats and MTD versions.
++	  older-style format.  See notes on tags formats and MTD versions
++	  in yaffs_mtdif1.c.
+ 
+ 	  If unsure, say N.
+ 
+@@ -109,26 +110,6 @@ config YAFFS_DISABLE_LAZY_LOAD
+ 
+ 	  If unsure, say N.
+ 
+-config YAFFS_CHECKPOINT_RESERVED_BLOCKS
+-	int "Reserved blocks for checkpointing"
+-	depends on YAFFS_YAFFS2
+-	default 10
+-	help
+-          Give the number of Blocks to reserve for checkpointing.
+-	  Checkpointing saves the state at unmount so that mounting is
+-	  much faster as a scan of all the flash to regenerate this state
+-	  is not needed.  These Blocks are reserved per partition, so if
+-	  you have very small partitions the default (10) may be a mess
+-	  for you.  You can set this value to 0, but that does not mean
+-	  checkpointing is disabled at all. There only won't be any
+-	  specially reserved blocks for checkpointing, so if there is
+-	  enough free space on the filesystem, it will be used for
+-	  checkpointing.
+-
+-	  If unsure, leave at default (10), but don't wonder if there are
+-	  always 2MB used on your large page device partition (10 x 2k
+-	  pagesize). When using small partitions or when being very small
+-	  on space, you probably want to set this to zero.
+ 
+ config YAFFS_DISABLE_WIDE_TNODES
+ 	bool "Turn off wide tnodes"
+--- a/fs/yaffs2/Makefile
++++ b/fs/yaffs2/Makefile
+@@ -5,7 +5,6 @@
+ obj-$(CONFIG_YAFFS_FS) += yaffs.o
+ 
+ yaffs-y := yaffs_ecc.o yaffs_fs.o yaffs_guts.o yaffs_checkptrw.o
+-yaffs-y += yaffs_packedtags2.o yaffs_nand.o yaffs_qsort.o
++yaffs-y += yaffs_packedtags1.o yaffs_packedtags2.o yaffs_nand.o yaffs_qsort.o
+ yaffs-y += yaffs_tagscompat.o yaffs_tagsvalidity.o
+-yaffs-y += yaffs_mtdif1.o yaffs_packedtags1.o
+-yaffs-y += yaffs_mtdif.o yaffs_mtdif2.o
++yaffs-y += yaffs_mtdif.o yaffs_mtdif1.o yaffs_mtdif2.o
+--- a/fs/yaffs2/moduleconfig.h
++++ b/fs/yaffs2/moduleconfig.h
+@@ -27,12 +27,12 @@
+ 
+ /* Default: Not selected */
+ /* Meaning: Yaffs does its own ECC, rather than using MTD ECC */
+-//#define CONFIG_YAFFS_DOES_ECC
++/* #define CONFIG_YAFFS_DOES_ECC */
+ 
+ /* Default: Not selected */
+ /* Meaning: ECC byte order is 'wrong'.  Only meaningful if */
+ /*          CONFIG_YAFFS_DOES_ECC is set */
+-//#define CONFIG_YAFFS_ECC_WRONG_ORDER
++/* #define CONFIG_YAFFS_ECC_WRONG_ORDER */
+ 
+ /* Default: Selected */
+ /* Meaning: Disables testing whether chunks are erased before writing to them*/
+@@ -54,11 +54,11 @@ that you need to continue to support.  N
+ older-style format.
+ Note: Use of this option generally requires that MTD's oob layout be
+ adjusted to use the older-style format.  See notes on tags formats and
+-MTD versions.
++MTD versions in yaffs_mtdif1.c.
+ */
+ /* Default: Not selected */
+ /* Meaning: Use older-style on-NAND data format with pageStatus byte */
+-#define CONFIG_YAFFS_9BYTE_TAGS
++/* #define CONFIG_YAFFS_9BYTE_TAGS */
+ 
+ #endif /* YAFFS_OUT_OF_TREE */
+ 
+--- a/fs/yaffs2/yaffs_checkptrw.c
++++ b/fs/yaffs2/yaffs_checkptrw.c
+@@ -12,48 +12,43 @@
+  */
+ 
+ const char *yaffs_checkptrw_c_version =
+-    "$Id: yaffs_checkptrw.c,v 1.14 2007-05-15 20:07:40 charles Exp $";
++	"$Id: yaffs_checkptrw.c,v 1.18 2009-03-06 17:20:49 wookey Exp $";
+ 
+ 
+ #include "yaffs_checkptrw.h"
+-
++#include "yaffs_getblockinfo.h"
+ 
+ static int yaffs_CheckpointSpaceOk(yaffs_Device *dev)
+ {
+-
+ 	int blocksAvailable = dev->nErasedBlocks - dev->nReservedBlocks;
+ 
+ 	T(YAFFS_TRACE_CHECKPOINT,
+ 		(TSTR("checkpt blocks available = %d" TENDSTR),
+ 		blocksAvailable));
+ 
+-
+ 	return (blocksAvailable <= 0) ? 0 : 1;
+ }
+ 
+ 
+ static int yaffs_CheckpointErase(yaffs_Device *dev)
+ {
+-
+ 	int i;
+ 
+-
+-	if(!dev->eraseBlockInNAND)
++	if (!dev->eraseBlockInNAND)
+ 		return 0;
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("checking blocks %d to %d"TENDSTR),
+-		dev->internalStartBlock,dev->internalEndBlock));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("checking blocks %d to %d"TENDSTR),
++		dev->internalStartBlock, dev->internalEndBlock));
+ 
+-	for(i = dev->internalStartBlock; i <= dev->internalEndBlock; i++) {
+-		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,i);
+-		if(bi->blockState == YAFFS_BLOCK_STATE_CHECKPOINT){
+-			T(YAFFS_TRACE_CHECKPOINT,(TSTR("erasing checkpt block %d"TENDSTR),i));
+-			if(dev->eraseBlockInNAND(dev,i- dev->blockOffset /* realign */)){
++	for (i = dev->internalStartBlock; i <= dev->internalEndBlock; i++) {
++		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, i);
++		if (bi->blockState == YAFFS_BLOCK_STATE_CHECKPOINT) {
++			T(YAFFS_TRACE_CHECKPOINT, (TSTR("erasing checkpt block %d"TENDSTR), i));
++			if (dev->eraseBlockInNAND(dev, i - dev->blockOffset /* realign */)) {
+ 				bi->blockState = YAFFS_BLOCK_STATE_EMPTY;
+ 				dev->nErasedBlocks++;
+ 				dev->nFreeChunks += dev->nChunksPerBlock;
+-			}
+-			else {
+-				dev->markNANDBlockBad(dev,i);
++			} else {
++				dev->markNANDBlockBad(dev, i);
+ 				bi->blockState = YAFFS_BLOCK_STATE_DEAD;
+ 			}
+ 		}
+@@ -71,23 +66,23 @@ static void yaffs_CheckpointFindNextEras
+ 	int blocksAvailable = dev->nErasedBlocks - dev->nReservedBlocks;
+ 	T(YAFFS_TRACE_CHECKPOINT,
+ 		(TSTR("allocating checkpt block: erased %d reserved %d avail %d next %d "TENDSTR),
+-		dev->nErasedBlocks,dev->nReservedBlocks,blocksAvailable,dev->checkpointNextBlock));
++		dev->nErasedBlocks, dev->nReservedBlocks, blocksAvailable, dev->checkpointNextBlock));
+ 
+-	if(dev->checkpointNextBlock >= 0 &&
+-	   dev->checkpointNextBlock <= dev->internalEndBlock &&
+-	   blocksAvailable > 0){
+-
+-		for(i = dev->checkpointNextBlock; i <= dev->internalEndBlock; i++){
+-			yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,i);
+-			if(bi->blockState == YAFFS_BLOCK_STATE_EMPTY){
++	if (dev->checkpointNextBlock >= 0 &&
++			dev->checkpointNextBlock <= dev->internalEndBlock &&
++			blocksAvailable > 0) {
++
++		for (i = dev->checkpointNextBlock; i <= dev->internalEndBlock; i++) {
++			yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, i);
++			if (bi->blockState == YAFFS_BLOCK_STATE_EMPTY) {
+ 				dev->checkpointNextBlock = i + 1;
+ 				dev->checkpointCurrentBlock = i;
+-				T(YAFFS_TRACE_CHECKPOINT,(TSTR("allocating checkpt block %d"TENDSTR),i));
++				T(YAFFS_TRACE_CHECKPOINT, (TSTR("allocating checkpt block %d"TENDSTR), i));
+ 				return;
+ 			}
+ 		}
+ 	}
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("out of checkpt blocks"TENDSTR)));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("out of checkpt blocks"TENDSTR)));
+ 
+ 	dev->checkpointNextBlock = -1;
+ 	dev->checkpointCurrentBlock = -1;
+@@ -98,30 +93,31 @@ static void yaffs_CheckpointFindNextChec
+ 	int  i;
+ 	yaffs_ExtendedTags tags;
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("find next checkpt block: start:  blocks %d next %d" TENDSTR),
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("find next checkpt block: start:  blocks %d next %d" TENDSTR),
+ 		dev->blocksInCheckpoint, dev->checkpointNextBlock));
+ 
+-	if(dev->blocksInCheckpoint < dev->checkpointMaxBlocks)
+-		for(i = dev->checkpointNextBlock; i <= dev->internalEndBlock; i++){
++	if (dev->blocksInCheckpoint < dev->checkpointMaxBlocks)
++		for (i = dev->checkpointNextBlock; i <= dev->internalEndBlock; i++) {
+ 			int chunk = i * dev->nChunksPerBlock;
+ 			int realignedChunk = chunk - dev->chunkOffset;
+ 
+-			dev->readChunkWithTagsFromNAND(dev,realignedChunk,NULL,&tags);
+-			T(YAFFS_TRACE_CHECKPOINT,(TSTR("find next checkpt block: search: block %d oid %d seq %d eccr %d" TENDSTR),
+-				i, tags.objectId,tags.sequenceNumber,tags.eccResult));
++			dev->readChunkWithTagsFromNAND(dev, realignedChunk,
++					NULL, &tags);
++			T(YAFFS_TRACE_CHECKPOINT, (TSTR("find next checkpt block: search: block %d oid %d seq %d eccr %d" TENDSTR),
++				i, tags.objectId, tags.sequenceNumber, tags.eccResult));
+ 
+-			if(tags.sequenceNumber == YAFFS_SEQUENCE_CHECKPOINT_DATA){
++			if (tags.sequenceNumber == YAFFS_SEQUENCE_CHECKPOINT_DATA) {
+ 				/* Right kind of block */
+ 				dev->checkpointNextBlock = tags.objectId;
+ 				dev->checkpointCurrentBlock = i;
+ 				dev->checkpointBlockList[dev->blocksInCheckpoint] = i;
+ 				dev->blocksInCheckpoint++;
+-				T(YAFFS_TRACE_CHECKPOINT,(TSTR("found checkpt block %d"TENDSTR),i));
++				T(YAFFS_TRACE_CHECKPOINT, (TSTR("found checkpt block %d"TENDSTR), i));
+ 				return;
+ 			}
+ 		}
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("found no more checkpt blocks"TENDSTR)));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("found no more checkpt blocks"TENDSTR)));
+ 
+ 	dev->checkpointNextBlock = -1;
+ 	dev->checkpointCurrentBlock = -1;
+@@ -133,17 +129,17 @@ int yaffs_CheckpointOpen(yaffs_Device *d
+ 
+ 	/* Got the functions we need? */
+ 	if (!dev->writeChunkWithTagsToNAND ||
+-	    !dev->readChunkWithTagsFromNAND ||
+-	    !dev->eraseBlockInNAND ||
+-	    !dev->markNANDBlockBad)
++			!dev->readChunkWithTagsFromNAND ||
++			!dev->eraseBlockInNAND ||
++			!dev->markNANDBlockBad)
+ 		return 0;
+ 
+-	if(forWriting && !yaffs_CheckpointSpaceOk(dev))
++	if (forWriting && !yaffs_CheckpointSpaceOk(dev))
+ 		return 0;
+ 
+-	if(!dev->checkpointBuffer)
+-		dev->checkpointBuffer = YMALLOC_DMA(dev->nDataBytesPerChunk);
+-	if(!dev->checkpointBuffer)
++	if (!dev->checkpointBuffer)
++		dev->checkpointBuffer = YMALLOC_DMA(dev->totalBytesPerChunk);
++	if (!dev->checkpointBuffer)
+ 		return 0;
+ 
+ 
+@@ -159,12 +155,10 @@ int yaffs_CheckpointOpen(yaffs_Device *d
+ 	dev->checkpointNextBlock = dev->internalStartBlock;
+ 
+ 	/* Erase all the blocks in the checkpoint area */
+-	if(forWriting){
+-		memset(dev->checkpointBuffer,0,dev->nDataBytesPerChunk);
++	if (forWriting) {
++		memset(dev->checkpointBuffer, 0, dev->nDataBytesPerChunk);
+ 		dev->checkpointByteOffset = 0;
+ 		return yaffs_CheckpointErase(dev);
+-
+-
+ 	} else {
+ 		int i;
+ 		/* Set to a value that will kick off a read */
+@@ -174,7 +168,7 @@ int yaffs_CheckpointOpen(yaffs_Device *d
+ 		dev->blocksInCheckpoint = 0;
+ 		dev->checkpointMaxBlocks = (dev->internalEndBlock - dev->internalStartBlock)/16 + 2;
+ 		dev->checkpointBlockList = YMALLOC(sizeof(int) * dev->checkpointMaxBlocks);
+-		for(i = 0; i < dev->checkpointMaxBlocks; i++)
++		for (i = 0; i < dev->checkpointMaxBlocks; i++)
+ 			dev->checkpointBlockList[i] = -1;
+ 	}
+ 
+@@ -191,18 +185,17 @@ int yaffs_GetCheckpointSum(yaffs_Device 
+ 
+ static int yaffs_CheckpointFlushBuffer(yaffs_Device *dev)
+ {
+-
+ 	int chunk;
+ 	int realignedChunk;
+ 
+ 	yaffs_ExtendedTags tags;
+ 
+-	if(dev->checkpointCurrentBlock < 0){
++	if (dev->checkpointCurrentBlock < 0) {
+ 		yaffs_CheckpointFindNextErasedBlock(dev);
+ 		dev->checkpointCurrentChunk = 0;
+ 	}
+ 
+-	if(dev->checkpointCurrentBlock < 0)
++	if (dev->checkpointCurrentBlock < 0)
+ 		return 0;
+ 
+ 	tags.chunkDeleted = 0;
+@@ -210,10 +203,10 @@ static int yaffs_CheckpointFlushBuffer(y
+ 	tags.chunkId = dev->checkpointPageSequence + 1;
+ 	tags.sequenceNumber =  YAFFS_SEQUENCE_CHECKPOINT_DATA;
+ 	tags.byteCount = dev->nDataBytesPerChunk;
+-	if(dev->checkpointCurrentChunk == 0){
++	if (dev->checkpointCurrentChunk == 0) {
+ 		/* First chunk we write for the block? Set block state to
+ 		   checkpoint */
+-		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,dev->checkpointCurrentBlock);
++		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, dev->checkpointCurrentBlock);
+ 		bi->blockState = YAFFS_BLOCK_STATE_CHECKPOINT;
+ 		dev->blocksInCheckpoint++;
+ 	}
+@@ -221,28 +214,29 @@ static int yaffs_CheckpointFlushBuffer(y
+ 	chunk = dev->checkpointCurrentBlock * dev->nChunksPerBlock + dev->checkpointCurrentChunk;
+ 
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("checkpoint wite buffer nand %d(%d:%d) objid %d chId %d" TENDSTR),
+-		chunk, dev->checkpointCurrentBlock, dev->checkpointCurrentChunk,tags.objectId,tags.chunkId));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("checkpoint wite buffer nand %d(%d:%d) objid %d chId %d" TENDSTR),
++		chunk, dev->checkpointCurrentBlock, dev->checkpointCurrentChunk, tags.objectId, tags.chunkId));
+ 
+ 	realignedChunk = chunk - dev->chunkOffset;
+ 
+-	dev->writeChunkWithTagsToNAND(dev,realignedChunk,dev->checkpointBuffer,&tags);
++	dev->writeChunkWithTagsToNAND(dev, realignedChunk,
++			dev->checkpointBuffer, &tags);
+ 	dev->checkpointByteOffset = 0;
+ 	dev->checkpointPageSequence++;
+ 	dev->checkpointCurrentChunk++;
+-	if(dev->checkpointCurrentChunk >= dev->nChunksPerBlock){
++	if (dev->checkpointCurrentChunk >= dev->nChunksPerBlock) {
+ 		dev->checkpointCurrentChunk = 0;
+ 		dev->checkpointCurrentBlock = -1;
+ 	}
+-	memset(dev->checkpointBuffer,0,dev->nDataBytesPerChunk);
++	memset(dev->checkpointBuffer, 0, dev->nDataBytesPerChunk);
+ 
+ 	return 1;
+ }
+ 
+ 
+-int yaffs_CheckpointWrite(yaffs_Device *dev,const void *data, int nBytes)
++int yaffs_CheckpointWrite(yaffs_Device *dev, const void *data, int nBytes)
+ {
+-	int i=0;
++	int i = 0;
+ 	int ok = 1;
+ 
+ 
+@@ -250,17 +244,14 @@ int yaffs_CheckpointWrite(yaffs_Device *
+ 
+ 
+ 
+-	if(!dev->checkpointBuffer)
++	if (!dev->checkpointBuffer)
+ 		return 0;
+ 
+-	if(!dev->checkpointOpenForWrite)
++	if (!dev->checkpointOpenForWrite)
+ 		return -1;
+ 
+-	while(i < nBytes && ok) {
+-
+-
+-
+-		dev->checkpointBuffer[dev->checkpointByteOffset] = *dataBytes ;
++	while (i < nBytes && ok) {
++		dev->checkpointBuffer[dev->checkpointByteOffset] = *dataBytes;
+ 		dev->checkpointSum += *dataBytes;
+ 		dev->checkpointXor ^= *dataBytes;
+ 
+@@ -270,18 +261,17 @@ int yaffs_CheckpointWrite(yaffs_Device *
+ 		dev->checkpointByteCount++;
+ 
+ 
+-		if(dev->checkpointByteOffset < 0 ||
++		if (dev->checkpointByteOffset < 0 ||
+ 		   dev->checkpointByteOffset >= dev->nDataBytesPerChunk)
+ 			ok = yaffs_CheckpointFlushBuffer(dev);
+-
+ 	}
+ 
+-	return 	i;
++	return i;
+ }
+ 
+ int yaffs_CheckpointRead(yaffs_Device *dev, void *data, int nBytes)
+ {
+-	int i=0;
++	int i = 0;
+ 	int ok = 1;
+ 	yaffs_ExtendedTags tags;
+ 
+@@ -291,52 +281,54 @@ int yaffs_CheckpointRead(yaffs_Device *d
+ 
+ 	__u8 *dataBytes = (__u8 *)data;
+ 
+-	if(!dev->checkpointBuffer)
++	if (!dev->checkpointBuffer)
+ 		return 0;
+ 
+-	if(dev->checkpointOpenForWrite)
++	if (dev->checkpointOpenForWrite)
+ 		return -1;
+ 
+-	while(i < nBytes && ok) {
++	while (i < nBytes && ok) {
+ 
+ 
+-		if(dev->checkpointByteOffset < 0 ||
+-		   dev->checkpointByteOffset >= dev->nDataBytesPerChunk) {
++		if (dev->checkpointByteOffset < 0 ||
++			dev->checkpointByteOffset >= dev->nDataBytesPerChunk) {
+ 
+-		   	if(dev->checkpointCurrentBlock < 0){
++			if (dev->checkpointCurrentBlock < 0) {
+ 				yaffs_CheckpointFindNextCheckpointBlock(dev);
+ 				dev->checkpointCurrentChunk = 0;
+ 			}
+ 
+-			if(dev->checkpointCurrentBlock < 0)
++			if (dev->checkpointCurrentBlock < 0)
+ 				ok = 0;
+ 			else {
+-
+-				chunk = dev->checkpointCurrentBlock * dev->nChunksPerBlock +
+-				          dev->checkpointCurrentChunk;
++				chunk = dev->checkpointCurrentBlock *
++					dev->nChunksPerBlock +
++					dev->checkpointCurrentChunk;
+ 
+ 				realignedChunk = chunk - dev->chunkOffset;
+ 
+-	   			/* read in the next chunk */
+-	   			/* printf("read checkpoint page %d\n",dev->checkpointPage); */
+-				dev->readChunkWithTagsFromNAND(dev, realignedChunk,
+-							       dev->checkpointBuffer,
+-							      &tags);
+-
+-				if(tags.chunkId != (dev->checkpointPageSequence + 1) ||
+-				   tags.sequenceNumber != YAFFS_SEQUENCE_CHECKPOINT_DATA)
+-				   ok = 0;
++				/* read in the next chunk */
++				/* printf("read checkpoint page %d\n",dev->checkpointPage); */
++				dev->readChunkWithTagsFromNAND(dev,
++						realignedChunk,
++						dev->checkpointBuffer,
++						&tags);
++
++				if (tags.chunkId != (dev->checkpointPageSequence + 1) ||
++					tags.eccResult > YAFFS_ECC_RESULT_FIXED ||
++					tags.sequenceNumber != YAFFS_SEQUENCE_CHECKPOINT_DATA)
++					ok = 0;
+ 
+ 				dev->checkpointByteOffset = 0;
+ 				dev->checkpointPageSequence++;
+ 				dev->checkpointCurrentChunk++;
+ 
+-				if(dev->checkpointCurrentChunk >= dev->nChunksPerBlock)
++				if (dev->checkpointCurrentChunk >= dev->nChunksPerBlock)
+ 					dev->checkpointCurrentBlock = -1;
+ 			}
+ 		}
+ 
+-		if(ok){
++		if (ok) {
+ 			*dataBytes = dev->checkpointBuffer[dev->checkpointByteOffset];
+ 			dev->checkpointSum += *dataBytes;
+ 			dev->checkpointXor ^= *dataBytes;
+@@ -353,17 +345,17 @@ int yaffs_CheckpointRead(yaffs_Device *d
+ int yaffs_CheckpointClose(yaffs_Device *dev)
+ {
+ 
+-	if(dev->checkpointOpenForWrite){
+-		if(dev->checkpointByteOffset != 0)
++	if (dev->checkpointOpenForWrite) {
++		if (dev->checkpointByteOffset != 0)
+ 			yaffs_CheckpointFlushBuffer(dev);
+ 	} else {
+ 		int i;
+-		for(i = 0; i < dev->blocksInCheckpoint && dev->checkpointBlockList[i] >= 0; i++){
+-			yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,dev->checkpointBlockList[i]);
+-			if(bi->blockState == YAFFS_BLOCK_STATE_EMPTY)
++		for (i = 0; i < dev->blocksInCheckpoint && dev->checkpointBlockList[i] >= 0; i++) {
++			yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, dev->checkpointBlockList[i]);
++			if (bi->blockState == YAFFS_BLOCK_STATE_EMPTY)
+ 				bi->blockState = YAFFS_BLOCK_STATE_CHECKPOINT;
+ 			else {
+-				// Todo this looks odd...
++				/* Todo this looks odd... */
+ 			}
+ 		}
+ 		YFREE(dev->checkpointBlockList);
+@@ -374,27 +366,25 @@ int yaffs_CheckpointClose(yaffs_Device *
+ 	dev->nErasedBlocks -= dev->blocksInCheckpoint;
+ 
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("checkpoint byte count %d" TENDSTR),
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("checkpoint byte count %d" TENDSTR),
+ 			dev->checkpointByteCount));
+ 
+-	if(dev->checkpointBuffer){
++	if (dev->checkpointBuffer) {
+ 		/* free the buffer */
+ 		YFREE(dev->checkpointBuffer);
+ 		dev->checkpointBuffer = NULL;
+ 		return 1;
+-	}
+-	else
++	} else
+ 		return 0;
+-
+ }
+ 
+ int yaffs_CheckpointInvalidateStream(yaffs_Device *dev)
+ {
+ 	/* Erase the first checksum block */
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("checkpoint invalidate"TENDSTR)));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("checkpoint invalidate"TENDSTR)));
+ 
+-	if(!yaffs_CheckpointSpaceOk(dev))
++	if (!yaffs_CheckpointSpaceOk(dev))
+ 		return 0;
+ 
+ 	return yaffs_CheckpointErase(dev);
+--- a/fs/yaffs2/yaffs_checkptrw.h
++++ b/fs/yaffs2/yaffs_checkptrw.h
+@@ -20,9 +20,9 @@
+ 
+ int yaffs_CheckpointOpen(yaffs_Device *dev, int forWriting);
+ 
+-int yaffs_CheckpointWrite(yaffs_Device *dev,const void *data, int nBytes);
++int yaffs_CheckpointWrite(yaffs_Device *dev, const void *data, int nBytes);
+ 
+-int yaffs_CheckpointRead(yaffs_Device *dev,void *data, int nBytes);
++int yaffs_CheckpointRead(yaffs_Device *dev, void *data, int nBytes);
+ 
+ int yaffs_GetCheckpointSum(yaffs_Device *dev, __u32 *sum);
+ 
+--- a/fs/yaffs2/yaffs_ecc.c
++++ b/fs/yaffs2/yaffs_ecc.c
+@@ -29,7 +29,7 @@
+  */
+ 
+ const char *yaffs_ecc_c_version =
+-    "$Id: yaffs_ecc.c,v 1.9 2007-02-14 01:09:06 wookey Exp $";
++	"$Id: yaffs_ecc.c,v 1.11 2009-03-06 17:20:50 wookey Exp $";
+ 
+ #include "yportenv.h"
+ 
+@@ -109,12 +109,10 @@ void yaffs_ECCCalculate(const unsigned c
+ 		b = column_parity_table[*data++];
+ 		col_parity ^= b;
+ 
+-		if (b & 0x01)	// odd number of bits in the byte
+-		{
++		if (b & 0x01) {		/* odd number of bits in the byte */
+ 			line_parity ^= i;
+ 			line_parity_prime ^= ~i;
+ 		}
+-
+ 	}
+ 
+ 	ecc[2] = (~col_parity) | 0x03;
+@@ -158,7 +156,7 @@ void yaffs_ECCCalculate(const unsigned c
+ 	ecc[0] = ~t;
+ 
+ #ifdef CONFIG_YAFFS_ECC_WRONG_ORDER
+-	// Swap the bytes into the wrong order
++	/* Swap the bytes into the wrong order */
+ 	t = ecc[0];
+ 	ecc[0] = ecc[1];
+ 	ecc[1] = t;
+@@ -189,7 +187,7 @@ int yaffs_ECCCorrect(unsigned char *data
+ 		unsigned bit;
+ 
+ #ifdef CONFIG_YAFFS_ECC_WRONG_ORDER
+-		// swap the bytes to correct for the wrong order
++		/* swap the bytes to correct for the wrong order */
+ 		unsigned char t;
+ 
+ 		t = d0;
+@@ -251,7 +249,7 @@ int yaffs_ECCCorrect(unsigned char *data
+  * ECCxxxOther does ECC calcs on arbitrary n bytes of data
+  */
+ void yaffs_ECCCalculateOther(const unsigned char *data, unsigned nBytes,
+-			     yaffs_ECCOther * eccOther)
++				yaffs_ECCOther *eccOther)
+ {
+ 	unsigned int i;
+ 
+@@ -278,8 +276,8 @@ void yaffs_ECCCalculateOther(const unsig
+ }
+ 
+ int yaffs_ECCCorrectOther(unsigned char *data, unsigned nBytes,
+-			  yaffs_ECCOther * read_ecc,
+-			  const yaffs_ECCOther * test_ecc)
++			yaffs_ECCOther *read_ecc,
++			const yaffs_ECCOther *test_ecc)
+ {
+ 	unsigned char cDelta;	/* column parity delta */
+ 	unsigned lDelta;	/* line parity delta */
+@@ -294,8 +292,7 @@ int yaffs_ECCCorrectOther(unsigned char 
+ 		return 0; /* no error */
+ 
+ 	if (lDelta == ~lDeltaPrime &&
+-	    (((cDelta ^ (cDelta >> 1)) & 0x15) == 0x15))
+-	{
++	    (((cDelta ^ (cDelta >> 1)) & 0x15) == 0x15)) {
+ 		/* Single bit (recoverable) error in data */
+ 
+ 		bit = 0;
+@@ -307,7 +304,7 @@ int yaffs_ECCCorrectOther(unsigned char 
+ 		if (cDelta & 0x02)
+ 			bit |= 0x01;
+ 
+-		if(lDelta >= nBytes)
++		if (lDelta >= nBytes)
+ 			return -1;
+ 
+ 		data[lDelta] ^= (1 << bit);
+@@ -316,7 +313,7 @@ int yaffs_ECCCorrectOther(unsigned char 
+ 	}
+ 
+ 	if ((yaffs_CountBits32(lDelta) + yaffs_CountBits32(lDeltaPrime) +
+-	     yaffs_CountBits(cDelta)) == 1) {
++			yaffs_CountBits(cDelta)) == 1) {
+ 		/* Reccoverable error in ecc */
+ 
+ 		*read_ecc = *test_ecc;
+@@ -326,6 +323,4 @@ int yaffs_ECCCorrectOther(unsigned char 
+ 	/* Unrecoverable error */
+ 
+ 	return -1;
+-
+ }
+-
+--- a/fs/yaffs2/yaffs_ecc.h
++++ b/fs/yaffs2/yaffs_ecc.h
+@@ -13,15 +13,15 @@
+  * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+  */
+ 
+- /*
+-  * This code implements the ECC algorithm used in SmartMedia.
+-  *
+-  * The ECC comprises 22 bits of parity information and is stuffed into 3 bytes.
+-  * The two unused bit are set to 1.
+-  * The ECC can correct single bit errors in a 256-byte page of data. Thus, two such ECC
+-  * blocks are used on a 512-byte NAND page.
+-  *
+-  */
++/*
++ * This code implements the ECC algorithm used in SmartMedia.
++ *
++ * The ECC comprises 22 bits of parity information and is stuffed into 3 bytes.
++ * The two unused bit are set to 1.
++ * The ECC can correct single bit errors in a 256-byte page of data. Thus, two such ECC
++ * blocks are used on a 512-byte NAND page.
++ *
++ */
+ 
+ #ifndef __YAFFS_ECC_H__
+ #define __YAFFS_ECC_H__
+@@ -34,11 +34,11 @@ typedef struct {
+ 
+ void yaffs_ECCCalculate(const unsigned char *data, unsigned char *ecc);
+ int yaffs_ECCCorrect(unsigned char *data, unsigned char *read_ecc,
+-		     const unsigned char *test_ecc);
++		const unsigned char *test_ecc);
+ 
+ void yaffs_ECCCalculateOther(const unsigned char *data, unsigned nBytes,
+-			     yaffs_ECCOther * ecc);
++			yaffs_ECCOther *ecc);
+ int yaffs_ECCCorrectOther(unsigned char *data, unsigned nBytes,
+-			  yaffs_ECCOther * read_ecc,
+-			  const yaffs_ECCOther * test_ecc);
++			yaffs_ECCOther *read_ecc,
++			const yaffs_ECCOther *test_ecc);
+ #endif
+--- a/fs/yaffs2/yaffs_fs.c
++++ b/fs/yaffs2/yaffs_fs.c
+@@ -1,7 +1,7 @@
+ /*
+  * YAFFS: Yet Another Flash File System. A NAND-flash specific file system.
+  *
+- * Copyright (C) 2002-2007 Aleph One Ltd.
++ * Copyright (C) 2002-2009 Aleph One Ltd.
+  *   for Toby Churchill Ltd and Brightstar Engineering
+  *
+  * Created by Charles Manning <charles@aleph1.co.uk>
+@@ -32,18 +32,17 @@
+  */
+ 
+ const char *yaffs_fs_c_version =
+-    "$Id: yaffs_fs.c,v 1.63 2007-09-19 20:35:40 imcd Exp $";
++    "$Id: yaffs_fs.c,v 1.79 2009-03-17 01:12:00 wookey Exp $";
+ extern const char *yaffs_guts_c_version;
+ 
+ #include <linux/version.h>
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19))
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 19))
+ #include <linux/config.h>
+ #endif
+ #include <linux/kernel.h>
+ #include <linux/module.h>
+ #include <linux/slab.h>
+ #include <linux/init.h>
+-#include <linux/list.h>
+ #include <linux/fs.h>
+ #include <linux/proc_fs.h>
+ #include <linux/smp_lock.h>
+@@ -53,10 +52,12 @@ extern const char *yaffs_guts_c_version;
+ #include <linux/string.h>
+ #include <linux/ctype.h>
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#include "asm/div64.h"
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 
+ #include <linux/statfs.h>	/* Added NCB 15-8-2003 */
+-#include <asm/statfs.h>
++#include <linux/statfs.h>
+ #define UnlockPage(p) unlock_page(p)
+ #define Page_Uptodate(page)	test_bit(PG_uptodate, &(page)->flags)
+ 
+@@ -69,22 +70,45 @@ extern const char *yaffs_guts_c_version;
+ #define	BDEVNAME_SIZE		0
+ #define	yaffs_devname(sb, buf)	kdevname(sb->s_dev)
+ 
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 5, 0))
+ /* added NCB 26/5/2006 for 2.4.25-vrs2-tcl1 kernel */
+ #define __user
+ #endif
+ 
+ #endif
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 26))
++#define YPROC_ROOT  (&proc_root)
++#else
++#define YPROC_ROOT  NULL
++#endif
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ #define WRITE_SIZE_STR "writesize"
+-#define WRITE_SIZE(mtd) (mtd)->writesize
++#define WRITE_SIZE(mtd) ((mtd)->writesize)
+ #else
+ #define WRITE_SIZE_STR "oobblock"
+-#define WRITE_SIZE(mtd) (mtd)->oobblock
++#define WRITE_SIZE(mtd) ((mtd)->oobblock)
+ #endif
+ 
+-#include <asm/uaccess.h>
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 27))
++#define YAFFS_USE_WRITE_BEGIN_END 1
++#else
++#define YAFFS_USE_WRITE_BEGIN_END 0
++#endif
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 28))
++static uint32_t YCALCBLOCKS(uint64_t partition_size, uint32_t block_size)
++{
++	uint64_t result = partition_size;
++	do_div(result, block_size);
++	return (uint32_t)result;
++}
++#else
++#define YCALCBLOCKS(s, b) ((s)/(b))
++#endif
++
++#include <linux/uaccess.h>
+ 
+ #include "yportenv.h"
+ #include "yaffs_guts.h"
+@@ -96,28 +120,44 @@ extern const char *yaffs_guts_c_version;
+ 
+ unsigned int yaffs_traceMask = YAFFS_TRACE_BAD_BLOCKS;
+ unsigned int yaffs_wr_attempts = YAFFS_WR_ATTEMPTS;
++unsigned int yaffs_auto_checkpoint = 1;
+ 
+ /* Module Parameters */
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+-module_param(yaffs_traceMask,uint,0644);
+-module_param(yaffs_wr_attempts,uint,0644);
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
++module_param(yaffs_traceMask, uint, 0644);
++module_param(yaffs_wr_attempts, uint, 0644);
++module_param(yaffs_auto_checkpoint, uint, 0644);
++#else
++MODULE_PARM(yaffs_traceMask, "i");
++MODULE_PARM(yaffs_wr_attempts, "i");
++MODULE_PARM(yaffs_auto_checkpoint, "i");
++#endif
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 25))
++/* use iget and read_inode */
++#define Y_IGET(sb, inum) iget((sb), (inum))
++static void yaffs_read_inode(struct inode *inode);
++
+ #else
+-MODULE_PARM(yaffs_traceMask,"i");
+-MODULE_PARM(yaffs_wr_attempts,"i");
++/* Call local equivalent */
++#define YAFFS_USE_OWN_IGET
++#define Y_IGET(sb, inum) yaffs_iget((sb), (inum))
++
++static struct inode *yaffs_iget(struct super_block *sb, unsigned long ino);
+ #endif
+ 
+ /*#define T(x) printk x */
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18))
+-#define yaffs_InodeToObjectLV(iptr) (iptr)->i_private
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 18))
++#define yaffs_InodeToObjectLV(iptr) ((iptr)->i_private)
+ #else
+-#define yaffs_InodeToObjectLV(iptr) (iptr)->u.generic_ip
++#define yaffs_InodeToObjectLV(iptr) ((iptr)->u.generic_ip)
+ #endif
+ 
+ #define yaffs_InodeToObject(iptr) ((yaffs_Object *)(yaffs_InodeToObjectLV(iptr)))
+ #define yaffs_DentryToObject(dptr) yaffs_InodeToObject((dptr)->d_inode)
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ #define yaffs_SuperToDevice(sb)	((yaffs_Device *)sb->s_fs_info)
+ #else
+ #define yaffs_SuperToDevice(sb)	((yaffs_Device *)sb->u.generic_sbp)
+@@ -126,47 +166,49 @@ MODULE_PARM(yaffs_wr_attempts,"i");
+ static void yaffs_put_super(struct super_block *sb);
+ 
+ static ssize_t yaffs_file_write(struct file *f, const char *buf, size_t n,
+-				loff_t * pos);
++				loff_t *pos);
++static ssize_t yaffs_hold_space(struct file *f);
++static void yaffs_release_space(struct file *f);
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_file_flush(struct file *file, fl_owner_t id);
+ #else
+ static int yaffs_file_flush(struct file *file);
+ #endif
+ 
+ static int yaffs_sync_object(struct file *file, struct dentry *dentry,
+-			     int datasync);
++				int datasync);
+ 
+ static int yaffs_readdir(struct file *f, void *dirent, filldir_t filldir);
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode,
+ 			struct nameidata *n);
+ static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry,
+-				   struct nameidata *n);
++					struct nameidata *n);
+ #else
+ static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode);
+ static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry);
+ #endif
+ static int yaffs_link(struct dentry *old_dentry, struct inode *dir,
+-		      struct dentry *dentry);
++			struct dentry *dentry);
+ static int yaffs_unlink(struct inode *dir, struct dentry *dentry);
+ static int yaffs_symlink(struct inode *dir, struct dentry *dentry,
+-			 const char *symname);
++			const char *symname);
+ static int yaffs_mkdir(struct inode *dir, struct dentry *dentry, int mode);
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode,
+-		       dev_t dev);
++			dev_t dev);
+ #else
+ static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode,
+-		       int dev);
++			int dev);
+ #endif
+ static int yaffs_rename(struct inode *old_dir, struct dentry *old_dentry,
+ 			struct inode *new_dir, struct dentry *new_dentry);
+ static int yaffs_setattr(struct dentry *dentry, struct iattr *attr);
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_sync_fs(struct super_block *sb, int wait);
+ static void yaffs_write_super(struct super_block *sb);
+ #else
+@@ -174,33 +216,47 @@ static int yaffs_sync_fs(struct super_bl
+ static int yaffs_write_super(struct super_block *sb);
+ #endif
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_statfs(struct dentry *dentry, struct kstatfs *buf);
+-#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_statfs(struct super_block *sb, struct kstatfs *buf);
+ #else
+ static int yaffs_statfs(struct super_block *sb, struct statfs *buf);
+ #endif
+-static void yaffs_read_inode(struct inode *inode);
+ 
++#ifdef YAFFS_HAS_PUT_INODE
+ static void yaffs_put_inode(struct inode *inode);
++#endif
++
+ static void yaffs_delete_inode(struct inode *);
+ static void yaffs_clear_inode(struct inode *);
+ 
+ static int yaffs_readpage(struct file *file, struct page *page);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_writepage(struct page *page, struct writeback_control *wbc);
+ #else
+ static int yaffs_writepage(struct page *page);
+ #endif
++
++
++#if (YAFFS_USE_WRITE_BEGIN_END != 0)
++static int yaffs_write_begin(struct file *filp, struct address_space *mapping,
++				loff_t pos, unsigned len, unsigned flags,
++				struct page **pagep, void **fsdata);
++static int yaffs_write_end(struct file *filp, struct address_space *mapping,
++				loff_t pos, unsigned len, unsigned copied,
++				struct page *pg, void *fsdadata);
++#else
+ static int yaffs_prepare_write(struct file *f, struct page *pg,
+-			       unsigned offset, unsigned to);
++				unsigned offset, unsigned to);
+ static int yaffs_commit_write(struct file *f, struct page *pg, unsigned offset,
+-			      unsigned to);
++				unsigned to);
+ 
+-static int yaffs_readlink(struct dentry *dentry, char __user * buffer,
+-			  int buflen);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
++#endif
++
++static int yaffs_readlink(struct dentry *dentry, char __user *buffer,
++				int buflen);
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 13))
+ static void *yaffs_follow_link(struct dentry *dentry, struct nameidata *nd);
+ #else
+ static int yaffs_follow_link(struct dentry *dentry, struct nameidata *nd);
+@@ -209,12 +265,17 @@ static int yaffs_follow_link(struct dent
+ static struct address_space_operations yaffs_file_address_operations = {
+ 	.readpage = yaffs_readpage,
+ 	.writepage = yaffs_writepage,
++#if (YAFFS_USE_WRITE_BEGIN_END > 0)
++	.write_begin = yaffs_write_begin,
++	.write_end = yaffs_write_end,
++#else
+ 	.prepare_write = yaffs_prepare_write,
+ 	.commit_write = yaffs_commit_write,
++#endif
+ };
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,22))
+-static struct file_operations yaffs_file_operations = {
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 22))
++static const struct file_operations yaffs_file_operations = {
+ 	.read = do_sync_read,
+ 	.write = do_sync_write,
+ 	.aio_read = generic_file_aio_read,
+@@ -224,11 +285,12 @@ static struct file_operations yaffs_file
+ 	.fsync = yaffs_sync_object,
+ 	.splice_read = generic_file_splice_read,
+ 	.splice_write = generic_file_splice_write,
++	.llseek = generic_file_llseek,
+ };
+ 
+-#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18))
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 18))
+ 
+-static struct file_operations yaffs_file_operations = {
++static const struct file_operations yaffs_file_operations = {
+ 	.read = do_sync_read,
+ 	.write = do_sync_write,
+ 	.aio_read = generic_file_aio_read,
+@@ -241,29 +303,29 @@ static struct file_operations yaffs_file
+ 
+ #else
+ 
+-static struct file_operations yaffs_file_operations = {
++static const struct file_operations yaffs_file_operations = {
+ 	.read = generic_file_read,
+ 	.write = generic_file_write,
+ 	.mmap = generic_file_mmap,
+ 	.flush = yaffs_file_flush,
+ 	.fsync = yaffs_sync_object,
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 	.sendfile = generic_file_sendfile,
+ #endif
+ };
+ #endif
+ 
+-static struct inode_operations yaffs_file_inode_operations = {
++static const struct inode_operations yaffs_file_inode_operations = {
+ 	.setattr = yaffs_setattr,
+ };
+ 
+-static struct inode_operations yaffs_symlink_inode_operations = {
++static const struct inode_operations yaffs_symlink_inode_operations = {
+ 	.readlink = yaffs_readlink,
+ 	.follow_link = yaffs_follow_link,
+ 	.setattr = yaffs_setattr,
+ };
+ 
+-static struct inode_operations yaffs_dir_inode_operations = {
++static const struct inode_operations yaffs_dir_inode_operations = {
+ 	.create = yaffs_create,
+ 	.lookup = yaffs_lookup,
+ 	.link = yaffs_link,
+@@ -276,16 +338,21 @@ static struct inode_operations yaffs_dir
+ 	.setattr = yaffs_setattr,
+ };
+ 
+-static struct file_operations yaffs_dir_operations = {
++static const struct file_operations yaffs_dir_operations = {
+ 	.read = generic_read_dir,
+ 	.readdir = yaffs_readdir,
+ 	.fsync = yaffs_sync_object,
+ };
+ 
+-static struct super_operations yaffs_super_ops = {
++static const struct super_operations yaffs_super_ops = {
+ 	.statfs = yaffs_statfs,
++
++#ifndef YAFFS_USE_OWN_IGET
+ 	.read_inode = yaffs_read_inode,
++#endif
++#ifdef YAFFS_HAS_PUT_INODE
+ 	.put_inode = yaffs_put_inode,
++#endif
+ 	.put_super = yaffs_put_super,
+ 	.delete_inode = yaffs_delete_inode,
+ 	.clear_inode = yaffs_clear_inode,
+@@ -293,22 +360,21 @@ static struct super_operations yaffs_sup
+ 	.write_super = yaffs_write_super,
+ };
+ 
+-static void yaffs_GrossLock(yaffs_Device * dev)
++static void yaffs_GrossLock(yaffs_Device *dev)
+ {
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs locking\n"));
+-
++	T(YAFFS_TRACE_OS, ("yaffs locking %p\n", current));
+ 	down(&dev->grossLock);
++	T(YAFFS_TRACE_OS, ("yaffs locked %p\n", current));
+ }
+ 
+-static void yaffs_GrossUnlock(yaffs_Device * dev)
++static void yaffs_GrossUnlock(yaffs_Device *dev)
+ {
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs unlocking\n"));
++	T(YAFFS_TRACE_OS, ("yaffs unlocking %p\n", current));
+ 	up(&dev->grossLock);
+-
+ }
+ 
+-static int yaffs_readlink(struct dentry *dentry, char __user * buffer,
+-			  int buflen)
++static int yaffs_readlink(struct dentry *dentry, char __user *buffer,
++			int buflen)
+ {
+ 	unsigned char *alias;
+ 	int ret;
+@@ -329,7 +395,7 @@ static int yaffs_readlink(struct dentry 
+ 	return ret;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 13))
+ static void *yaffs_follow_link(struct dentry *dentry, struct nameidata *nd)
+ #else
+ static int yaffs_follow_link(struct dentry *dentry, struct nameidata *nd)
+@@ -345,32 +411,31 @@ static int yaffs_follow_link(struct dent
+ 
+ 	yaffs_GrossUnlock(dev);
+ 
+-	if (!alias)
+-        {
++	if (!alias) {
+ 		ret = -ENOMEM;
+ 		goto out;
+-        }
++	}
+ 
+ 	ret = vfs_follow_link(nd, alias);
+ 	kfree(alias);
+ out:
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
+-	return ERR_PTR (ret);
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 13))
++	return ERR_PTR(ret);
+ #else
+ 	return ret;
+ #endif
+ }
+ 
+ struct inode *yaffs_get_inode(struct super_block *sb, int mode, int dev,
+-			      yaffs_Object * obj);
++				yaffs_Object *obj);
+ 
+ /*
+  * Lookup is used to find objects in the fs
+  */
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 
+ static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry,
+-				   struct nameidata *n)
++				struct nameidata *n)
+ #else
+ static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry)
+ #endif
+@@ -383,12 +448,11 @@ static struct dentry *yaffs_lookup(struc
+ 	yaffs_GrossLock(dev);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_lookup for %d:%s\n",
+-	   yaffs_InodeToObject(dir)->objectId, dentry->d_name.name));
++		("yaffs_lookup for %d:%s\n",
++		yaffs_InodeToObject(dir)->objectId, dentry->d_name.name));
+ 
+-	obj =
+-	    yaffs_FindObjectByName(yaffs_InodeToObject(dir),
+-				   dentry->d_name.name);
++	obj = yaffs_FindObjectByName(yaffs_InodeToObject(dir),
++					dentry->d_name.name);
+ 
+ 	obj = yaffs_GetEquivalentObject(obj);	/* in case it was a hardlink */
+ 
+@@ -397,13 +461,13 @@ static struct dentry *yaffs_lookup(struc
+ 
+ 	if (obj) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_lookup found %d\n", obj->objectId));
++			("yaffs_lookup found %d\n", obj->objectId));
+ 
+ 		inode = yaffs_get_inode(dir->i_sb, obj->yst_mode, 0, obj);
+ 
+ 		if (inode) {
+ 			T(YAFFS_TRACE_OS,
+-			  (KERN_DEBUG "yaffs_loookup dentry \n"));
++				("yaffs_loookup dentry \n"));
+ /* #if 0 asserted by NCB for 2.5/6 compatability - falls through to
+  * d_add even if NULL inode */
+ #if 0
+@@ -416,7 +480,7 @@ static struct dentry *yaffs_lookup(struc
+ 		}
+ 
+ 	} else {
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_lookup not found\n"));
++		T(YAFFS_TRACE_OS, ("yaffs_lookup not found\n"));
+ 
+ 	}
+ 
+@@ -425,20 +489,22 @@ static struct dentry *yaffs_lookup(struc
+ 	d_add(dentry, inode);
+ 
+ 	return NULL;
+-	/*      return (ERR_PTR(-EIO)); */
+-
+ }
+ 
++
++#ifdef YAFFS_HAS_PUT_INODE
++
+ /* For now put inode is just for debugging
+  * Put inode is called when the inode **structure** is put.
+  */
+ static void yaffs_put_inode(struct inode *inode)
+ {
+ 	T(YAFFS_TRACE_OS,
+-	  ("yaffs_put_inode: ino %d, count %d\n", (int)inode->i_ino,
+-	   atomic_read(&inode->i_count)));
++		("yaffs_put_inode: ino %d, count %d\n", (int)inode->i_ino,
++		atomic_read(&inode->i_count)));
+ 
+ }
++#endif
+ 
+ /* clear is called to tell the fs to release any per-inode data it holds */
+ static void yaffs_clear_inode(struct inode *inode)
+@@ -449,9 +515,9 @@ static void yaffs_clear_inode(struct ino
+ 	obj = yaffs_InodeToObject(inode);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  ("yaffs_clear_inode: ino %d, count %d %s\n", (int)inode->i_ino,
+-	   atomic_read(&inode->i_count),
+-	   obj ? "object exists" : "null object"));
++		("yaffs_clear_inode: ino %d, count %d %s\n", (int)inode->i_ino,
++		atomic_read(&inode->i_count),
++		obj ? "object exists" : "null object"));
+ 
+ 	if (obj) {
+ 		dev = obj->myDev;
+@@ -486,23 +552,23 @@ static void yaffs_delete_inode(struct in
+ 	yaffs_Device *dev;
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  ("yaffs_delete_inode: ino %d, count %d %s\n", (int)inode->i_ino,
+-	   atomic_read(&inode->i_count),
+-	   obj ? "object exists" : "null object"));
++		("yaffs_delete_inode: ino %d, count %d %s\n", (int)inode->i_ino,
++		atomic_read(&inode->i_count),
++		obj ? "object exists" : "null object"));
+ 
+ 	if (obj) {
+ 		dev = obj->myDev;
+ 		yaffs_GrossLock(dev);
+-		yaffs_DeleteFile(obj);
++		yaffs_DeleteObject(obj);
+ 		yaffs_GrossUnlock(dev);
+ 	}
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
+-        truncate_inode_pages (&inode->i_data, 0);
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 13))
++	truncate_inode_pages(&inode->i_data, 0);
+ #endif
+ 	clear_inode(inode);
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_file_flush(struct file *file, fl_owner_t id)
+ #else
+ static int yaffs_file_flush(struct file *file)
+@@ -513,8 +579,8 @@ static int yaffs_file_flush(struct file 
+ 	yaffs_Device *dev = obj->myDev;
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_file_flush object %d (%s)\n", obj->objectId,
+-	   obj->dirty ? "dirty" : "clean"));
++		("yaffs_file_flush object %d (%s)\n", obj->objectId,
++		obj->dirty ? "dirty" : "clean"));
+ 
+ 	yaffs_GrossLock(dev);
+ 
+@@ -535,15 +601,15 @@ static int yaffs_readpage_nolock(struct 
+ 
+ 	yaffs_Device *dev;
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_readpage at %08x, size %08x\n",
+-			   (unsigned)(pg->index << PAGE_CACHE_SHIFT),
+-			   (unsigned)PAGE_CACHE_SIZE));
++	T(YAFFS_TRACE_OS, ("yaffs_readpage at %08x, size %08x\n",
++			(unsigned)(pg->index << PAGE_CACHE_SHIFT),
++			(unsigned)PAGE_CACHE_SIZE));
+ 
+ 	obj = yaffs_DentryToObject(f->f_dentry);
+ 
+ 	dev = obj->myDev;
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 	BUG_ON(!PageLocked(pg));
+ #else
+ 	if (!PageLocked(pg))
+@@ -555,9 +621,9 @@ static int yaffs_readpage_nolock(struct 
+ 
+ 	yaffs_GrossLock(dev);
+ 
+-	ret =
+-	    yaffs_ReadDataFromFile(obj, pg_buf, pg->index << PAGE_CACHE_SHIFT,
+-				   PAGE_CACHE_SIZE);
++	ret = yaffs_ReadDataFromFile(obj, pg_buf,
++				pg->index << PAGE_CACHE_SHIFT,
++				PAGE_CACHE_SIZE);
+ 
+ 	yaffs_GrossUnlock(dev);
+ 
+@@ -575,7 +641,7 @@ static int yaffs_readpage_nolock(struct 
+ 	flush_dcache_page(pg);
+ 	kunmap(pg);
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_readpage done\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_readpage done\n"));
+ 	return ret;
+ }
+ 
+@@ -593,7 +659,7 @@ static int yaffs_readpage(struct file *f
+ 
+ /* writepage inspired by/stolen from smbfs */
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_writepage(struct page *page, struct writeback_control *wbc)
+ #else
+ static int yaffs_writepage(struct page *page)
+@@ -616,12 +682,11 @@ static int yaffs_writepage(struct page *
+ 
+ 	if (offset > inode->i_size) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG
+-		   "yaffs_writepage at %08x, inode size = %08x!!!\n",
+-		   (unsigned)(page->index << PAGE_CACHE_SHIFT),
+-		   (unsigned)inode->i_size));
++			("yaffs_writepage at %08x, inode size = %08x!!!\n",
++			(unsigned)(page->index << PAGE_CACHE_SHIFT),
++			(unsigned)inode->i_size));
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "                -> don't care!!\n"));
++			("                -> don't care!!\n"));
+ 		unlock_page(page);
+ 		return 0;
+ 	}
+@@ -629,11 +694,10 @@ static int yaffs_writepage(struct page *
+ 	end_index = inode->i_size >> PAGE_CACHE_SHIFT;
+ 
+ 	/* easy case */
+-	if (page->index < end_index) {
++	if (page->index < end_index)
+ 		nBytes = PAGE_CACHE_SIZE;
+-	} else {
++	else
+ 		nBytes = inode->i_size & (PAGE_CACHE_SIZE - 1);
+-	}
+ 
+ 	get_page(page);
+ 
+@@ -643,19 +707,18 @@ static int yaffs_writepage(struct page *
+ 	yaffs_GrossLock(obj->myDev);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_writepage at %08x, size %08x\n",
+-	   (unsigned)(page->index << PAGE_CACHE_SHIFT), nBytes));
++		("yaffs_writepage at %08x, size %08x\n",
++		(unsigned)(page->index << PAGE_CACHE_SHIFT), nBytes));
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "writepag0: obj = %05x, ino = %05x\n",
+-	   (int)obj->variant.fileVariant.fileSize, (int)inode->i_size));
++		("writepag0: obj = %05x, ino = %05x\n",
++		(int)obj->variant.fileVariant.fileSize, (int)inode->i_size));
+ 
+-	nWritten =
+-	    yaffs_WriteDataToFile(obj, buffer, page->index << PAGE_CACHE_SHIFT,
+-				  nBytes, 0);
++	nWritten = yaffs_WriteDataToFile(obj, buffer,
++			page->index << PAGE_CACHE_SHIFT, nBytes, 0);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "writepag1: obj = %05x, ino = %05x\n",
+-	   (int)obj->variant.fileVariant.fileSize, (int)inode->i_size));
++		("writepag1: obj = %05x, ino = %05x\n",
++		(int)obj->variant.fileVariant.fileSize, (int)inode->i_size));
+ 
+ 	yaffs_GrossUnlock(obj->myDev);
+ 
+@@ -667,100 +730,207 @@ static int yaffs_writepage(struct page *
+ 	return (nWritten == nBytes) ? 0 : -ENOSPC;
+ }
+ 
++
++#if (YAFFS_USE_WRITE_BEGIN_END > 0)
++static int yaffs_write_begin(struct file *filp, struct address_space *mapping,
++				loff_t pos, unsigned len, unsigned flags,
++				struct page **pagep, void **fsdata)
++{
++	struct page *pg = NULL;
++	pgoff_t index = pos >> PAGE_CACHE_SHIFT;
++	uint32_t offset = pos & (PAGE_CACHE_SIZE - 1);
++	uint32_t to = offset + len;
++
++	int ret = 0;
++	int space_held = 0;
++
++	T(YAFFS_TRACE_OS, ("start yaffs_write_begin\n"));
++	/* Get a page */
++#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 28)
++	pg = grab_cache_page_write_begin(mapping, index, flags);
++#else
++	pg = __grab_cache_page(mapping, index);
++#endif
++
++	*pagep = pg;
++	if (!pg) {
++		ret =  -ENOMEM;
++		goto out;
++	}
++	/* Get fs space */
++	space_held = yaffs_hold_space(filp);
++
++	if (!space_held) {
++		ret = -ENOSPC;
++		goto out;
++	}
++
++	/* Update page if required */
++
++	if (!Page_Uptodate(pg) && (offset || to < PAGE_CACHE_SIZE))
++		ret = yaffs_readpage_nolock(filp, pg);
++
++	if (ret)
++		goto out;
++
++	/* Happy path return */
++	T(YAFFS_TRACE_OS, ("end yaffs_write_begin - ok\n"));
++
++	return 0;
++
++out:
++	T(YAFFS_TRACE_OS, ("end yaffs_write_begin fail returning %d\n", ret));
++	if (space_held)
++		yaffs_release_space(filp);
++	if (pg) {
++		unlock_page(pg);
++		page_cache_release(pg);
++	}
++	return ret;
++}
++
++#else
++
+ static int yaffs_prepare_write(struct file *f, struct page *pg,
+-			       unsigned offset, unsigned to)
++				unsigned offset, unsigned to)
+ {
++	T(YAFFS_TRACE_OS, ("yaffs_prepair_write\n"));
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_prepair_write\n"));
+ 	if (!Page_Uptodate(pg) && (offset || to < PAGE_CACHE_SIZE))
+ 		return yaffs_readpage_nolock(f, pg);
+-
+ 	return 0;
++}
++#endif
++
++#if (YAFFS_USE_WRITE_BEGIN_END > 0)
++static int yaffs_write_end(struct file *filp, struct address_space *mapping,
++				loff_t pos, unsigned len, unsigned copied,
++				struct page *pg, void *fsdadata)
++{
++	int ret = 0;
++	void *addr, *kva;
++	uint32_t offset_into_page = pos & (PAGE_CACHE_SIZE - 1);
++
++	kva = kmap(pg);
++	addr = kva + offset_into_page;
++
++	T(YAFFS_TRACE_OS,
++		("yaffs_write_end addr %x pos %x nBytes %d\n",
++		(unsigned) addr,
++		(int)pos, copied));
++
++	ret = yaffs_file_write(filp, addr, copied, &pos);
++
++	if (ret != copied) {
++		T(YAFFS_TRACE_OS,
++			("yaffs_write_end not same size ret %d  copied %d\n",
++			ret, copied));
++		SetPageError(pg);
++		ClearPageUptodate(pg);
++	} else {
++		SetPageUptodate(pg);
++	}
++
++	kunmap(pg);
+ 
++	yaffs_release_space(filp);
++	unlock_page(pg);
++	page_cache_release(pg);
++	return ret;
+ }
++#else
+ 
+ static int yaffs_commit_write(struct file *f, struct page *pg, unsigned offset,
+-			      unsigned to)
++				unsigned to)
+ {
++	void *addr, *kva;
+ 
+-	void *addr = page_address(pg) + offset;
+ 	loff_t pos = (((loff_t) pg->index) << PAGE_CACHE_SHIFT) + offset;
+ 	int nBytes = to - offset;
+ 	int nWritten;
+ 
+ 	unsigned spos = pos;
+-	unsigned saddr = (unsigned)addr;
++	unsigned saddr;
++
++	kva = kmap(pg);
++	addr = kva + offset;
++
++	saddr = (unsigned) addr;
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_commit_write addr %x pos %x nBytes %d\n", saddr,
+-	   spos, nBytes));
++		("yaffs_commit_write addr %x pos %x nBytes %d\n",
++		saddr, spos, nBytes));
+ 
+ 	nWritten = yaffs_file_write(f, addr, nBytes, &pos);
+ 
+ 	if (nWritten != nBytes) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG
+-		   "yaffs_commit_write not same size nWritten %d  nBytes %d\n",
+-		   nWritten, nBytes));
++			("yaffs_commit_write not same size nWritten %d  nBytes %d\n",
++			nWritten, nBytes));
+ 		SetPageError(pg);
+ 		ClearPageUptodate(pg);
+ 	} else {
+ 		SetPageUptodate(pg);
+ 	}
+ 
++	kunmap(pg);
++
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_commit_write returning %d\n",
+-	   nWritten == nBytes ? 0 : nWritten));
++		("yaffs_commit_write returning %d\n",
++		nWritten == nBytes ? 0 : nWritten));
+ 
+ 	return nWritten == nBytes ? 0 : nWritten;
+-
+ }
++#endif
++
+ 
+-static void yaffs_FillInodeFromObject(struct inode *inode, yaffs_Object * obj)
++static void yaffs_FillInodeFromObject(struct inode *inode, yaffs_Object *obj)
+ {
+ 	if (inode && obj) {
+ 
+ 
+ 		/* Check mode against the variant type and attempt to repair if broken. */
+- 		__u32 mode = obj->yst_mode;
+- 		switch( obj->variantType ){
+- 		case YAFFS_OBJECT_TYPE_FILE :
+- 		        if( ! S_ISREG(mode) ){
+- 			        obj->yst_mode &= ~S_IFMT;
+- 			        obj->yst_mode |= S_IFREG;
+- 			}
+-
+- 			break;
+- 		case YAFFS_OBJECT_TYPE_SYMLINK :
+- 		        if( ! S_ISLNK(mode) ){
+- 			        obj->yst_mode &= ~S_IFMT;
+- 				obj->yst_mode |= S_IFLNK;
+- 			}
+-
+- 			break;
+- 		case YAFFS_OBJECT_TYPE_DIRECTORY :
+- 		        if( ! S_ISDIR(mode) ){
+- 			        obj->yst_mode &= ~S_IFMT;
+- 			        obj->yst_mode |= S_IFDIR;
+- 			}
+-
+- 			break;
+- 		case YAFFS_OBJECT_TYPE_UNKNOWN :
+- 		case YAFFS_OBJECT_TYPE_HARDLINK :
+- 		case YAFFS_OBJECT_TYPE_SPECIAL :
+- 		default:
+- 		        /* TODO? */
+- 		        break;
+- 		}
++		__u32 mode = obj->yst_mode;
++		switch (obj->variantType) {
++		case YAFFS_OBJECT_TYPE_FILE:
++			if (!S_ISREG(mode)) {
++				obj->yst_mode &= ~S_IFMT;
++				obj->yst_mode |= S_IFREG;
++			}
++
++			break;
++		case YAFFS_OBJECT_TYPE_SYMLINK:
++			if (!S_ISLNK(mode)) {
++				obj->yst_mode &= ~S_IFMT;
++				obj->yst_mode |= S_IFLNK;
++			}
++
++			break;
++		case YAFFS_OBJECT_TYPE_DIRECTORY:
++			if (!S_ISDIR(mode)) {
++				obj->yst_mode &= ~S_IFMT;
++				obj->yst_mode |= S_IFDIR;
++			}
++
++			break;
++		case YAFFS_OBJECT_TYPE_UNKNOWN:
++		case YAFFS_OBJECT_TYPE_HARDLINK:
++		case YAFFS_OBJECT_TYPE_SPECIAL:
++		default:
++			/* TODO? */
++			break;
++		}
++
++		inode->i_flags |= S_NOATIME;
+ 
+ 		inode->i_ino = obj->objectId;
+ 		inode->i_mode = obj->yst_mode;
+ 		inode->i_uid = obj->yst_uid;
+ 		inode->i_gid = obj->yst_gid;
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19))
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 19))
+ 		inode->i_blksize = inode->i_sb->s_blocksize;
+ #endif
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 
+ 		inode->i_rdev = old_decode_dev(obj->yst_rdev);
+ 		inode->i_atime.tv_sec = (time_t) (obj->yst_atime);
+@@ -781,26 +951,25 @@ static void yaffs_FillInodeFromObject(st
+ 		inode->i_nlink = yaffs_GetObjectLinkCount(obj);
+ 
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG
+-		   "yaffs_FillInode mode %x uid %d gid %d size %d count %d\n",
+-		   inode->i_mode, inode->i_uid, inode->i_gid,
+-		   (int)inode->i_size, atomic_read(&inode->i_count)));
++			("yaffs_FillInode mode %x uid %d gid %d size %d count %d\n",
++			inode->i_mode, inode->i_uid, inode->i_gid,
++			(int)inode->i_size, atomic_read(&inode->i_count)));
+ 
+ 		switch (obj->yst_mode & S_IFMT) {
+ 		default:	/* fifo, device or socket */
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 			init_special_inode(inode, obj->yst_mode,
+-					   old_decode_dev(obj->yst_rdev));
++					old_decode_dev(obj->yst_rdev));
+ #else
+ 			init_special_inode(inode, obj->yst_mode,
+-					   (dev_t) (obj->yst_rdev));
++					(dev_t) (obj->yst_rdev));
+ #endif
+ 			break;
+ 		case S_IFREG:	/* file */
+ 			inode->i_op = &yaffs_file_inode_operations;
+ 			inode->i_fop = &yaffs_file_operations;
+ 			inode->i_mapping->a_ops =
+-			    &yaffs_file_address_operations;
++				&yaffs_file_address_operations;
+ 			break;
+ 		case S_IFDIR:	/* directory */
+ 			inode->i_op = &yaffs_dir_inode_operations;
+@@ -817,34 +986,36 @@ static void yaffs_FillInodeFromObject(st
+ 
+ 	} else {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_FileInode invalid parameters\n"));
++			("yaffs_FileInode invalid parameters\n"));
+ 	}
+ 
+ }
+ 
+ struct inode *yaffs_get_inode(struct super_block *sb, int mode, int dev,
+-			      yaffs_Object * obj)
++				yaffs_Object *obj)
+ {
+ 	struct inode *inode;
+ 
+ 	if (!sb) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_get_inode for NULL super_block!!\n"));
++			("yaffs_get_inode for NULL super_block!!\n"));
+ 		return NULL;
+ 
+ 	}
+ 
+ 	if (!obj) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_get_inode for NULL object!!\n"));
++			("yaffs_get_inode for NULL object!!\n"));
+ 		return NULL;
+ 
+ 	}
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_get_inode for object %d\n", obj->objectId));
++		("yaffs_get_inode for object %d\n", obj->objectId));
+ 
+-	inode = iget(sb, obj->objectId);
++	inode = Y_IGET(sb, obj->objectId);
++	if (IS_ERR(inode))
++		return NULL;
+ 
+ 	/* NB Side effect: iget calls back to yaffs_read_inode(). */
+ 	/* iget also increments the inode's i_count */
+@@ -854,7 +1025,7 @@ struct inode *yaffs_get_inode(struct sup
+ }
+ 
+ static ssize_t yaffs_file_write(struct file *f, const char *buf, size_t n,
+-				loff_t * pos)
++				loff_t *pos)
+ {
+ 	yaffs_Object *obj;
+ 	int nWritten, ipos;
+@@ -869,28 +1040,26 @@ static ssize_t yaffs_file_write(struct f
+ 
+ 	inode = f->f_dentry->d_inode;
+ 
+-	if (!S_ISBLK(inode->i_mode) && f->f_flags & O_APPEND) {
++	if (!S_ISBLK(inode->i_mode) && f->f_flags & O_APPEND)
+ 		ipos = inode->i_size;
+-	} else {
++	else
+ 		ipos = *pos;
+-	}
+ 
+-	if (!obj) {
++	if (!obj)
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_file_write: hey obj is null!\n"));
+-	} else {
++			("yaffs_file_write: hey obj is null!\n"));
++	else
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG
+-		   "yaffs_file_write about to write writing %d bytes"
+-		   "to object %d at %d\n",
+-		   n, obj->objectId, ipos));
+-	}
++			("yaffs_file_write about to write writing %zu bytes"
++			"to object %d at %d\n",
++			n, obj->objectId, ipos));
+ 
+ 	nWritten = yaffs_WriteDataToFile(obj, buf, ipos, n, 0);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_file_write writing %d bytes, %d written at %d\n",
+-	   n, nWritten, ipos));
++		("yaffs_file_write writing %zu bytes, %d written at %d\n",
++		n, nWritten, ipos));
++
+ 	if (nWritten > 0) {
+ 		ipos += nWritten;
+ 		*pos = ipos;
+@@ -899,10 +1068,9 @@ static ssize_t yaffs_file_write(struct f
+ 			inode->i_blocks = (ipos + 511) >> 9;
+ 
+ 			T(YAFFS_TRACE_OS,
+-			  (KERN_DEBUG
+-			   "yaffs_file_write size updated to %d bytes, "
+-			   "%d blocks\n",
+-			   ipos, (int)(inode->i_blocks)));
++				("yaffs_file_write size updated to %d bytes, "
++				"%d blocks\n",
++				ipos, (int)(inode->i_blocks)));
+ 		}
+ 
+ 	}
+@@ -910,13 +1078,54 @@ static ssize_t yaffs_file_write(struct f
+ 	return nWritten == 0 ? -ENOSPC : nWritten;
+ }
+ 
++/* Space holding and freeing is done to ensure we have space available for write_begin/end */
++/* For now we just assume few parallel writes and check against a small number. */
++/* Todo: need to do this with a counter to handle parallel reads better */
++
++static ssize_t yaffs_hold_space(struct file *f)
++{
++	yaffs_Object *obj;
++	yaffs_Device *dev;
++
++	int nFreeChunks;
++
++
++	obj = yaffs_DentryToObject(f->f_dentry);
++
++	dev = obj->myDev;
++
++	yaffs_GrossLock(dev);
++
++	nFreeChunks = yaffs_GetNumberOfFreeChunks(dev);
++
++	yaffs_GrossUnlock(dev);
++
++	return (nFreeChunks > 20) ? 1 : 0;
++}
++
++static void yaffs_release_space(struct file *f)
++{
++	yaffs_Object *obj;
++	yaffs_Device *dev;
++
++
++	obj = yaffs_DentryToObject(f->f_dentry);
++
++	dev = obj->myDev;
++
++	yaffs_GrossLock(dev);
++
++
++	yaffs_GrossUnlock(dev);
++}
++
+ static int yaffs_readdir(struct file *f, void *dirent, filldir_t filldir)
+ {
+ 	yaffs_Object *obj;
+ 	yaffs_Device *dev;
+ 	struct inode *inode = f->f_dentry->d_inode;
+ 	unsigned long offset, curoffs;
+-	struct list_head *i;
++	struct ylist_head *i;
+ 	yaffs_Object *l;
+ 
+ 	char name[YAFFS_MAX_NAME_LENGTH + 1];
+@@ -932,24 +1141,20 @@ static int yaffs_readdir(struct file *f,
+ 
+ 	if (offset == 0) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_readdir: entry . ino %d \n",
+-		   (int)inode->i_ino));
+-		if (filldir(dirent, ".", 1, offset, inode->i_ino, DT_DIR)
+-		    < 0) {
++			("yaffs_readdir: entry . ino %d \n",
++			(int)inode->i_ino));
++		if (filldir(dirent, ".", 1, offset, inode->i_ino, DT_DIR) < 0)
+ 			goto out;
+-		}
+ 		offset++;
+ 		f->f_pos++;
+ 	}
+ 	if (offset == 1) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_readdir: entry .. ino %d \n",
+-		   (int)f->f_dentry->d_parent->d_inode->i_ino));
+-		if (filldir
+-		    (dirent, "..", 2, offset,
+-		     f->f_dentry->d_parent->d_inode->i_ino, DT_DIR) < 0) {
++			("yaffs_readdir: entry .. ino %d \n",
++			(int)f->f_dentry->d_parent->d_inode->i_ino));
++		if (filldir(dirent, "..", 2, offset,
++			f->f_dentry->d_parent->d_inode->i_ino, DT_DIR) < 0)
+ 			goto out;
+-		}
+ 		offset++;
+ 		f->f_pos++;
+ 	}
+@@ -965,35 +1170,32 @@ static int yaffs_readdir(struct file *f,
+ 		f->f_version = inode->i_version;
+ 	}
+ 
+-	list_for_each(i, &obj->variant.directoryVariant.children) {
++	ylist_for_each(i, &obj->variant.directoryVariant.children) {
+ 		curoffs++;
+ 		if (curoffs >= offset) {
+-			l = list_entry(i, yaffs_Object, siblings);
++			l = ylist_entry(i, yaffs_Object, siblings);
+ 
+ 			yaffs_GetObjectName(l, name,
+ 					    YAFFS_MAX_NAME_LENGTH + 1);
+ 			T(YAFFS_TRACE_OS,
+-			  (KERN_DEBUG "yaffs_readdir: %s inode %d\n", name,
++			  ("yaffs_readdir: %s inode %d\n", name,
+ 			   yaffs_GetObjectInode(l)));
+ 
+ 			if (filldir(dirent,
+-				    name,
+-				    strlen(name),
+-				    offset,
+-				    yaffs_GetObjectInode(l),
+-				    yaffs_GetObjectType(l))
+-			    < 0) {
++					name,
++					strlen(name),
++					offset,
++					yaffs_GetObjectInode(l),
++					yaffs_GetObjectType(l)) < 0)
+ 				goto up_and_out;
+-			}
+ 
+ 			offset++;
+ 			f->f_pos++;
+ 		}
+ 	}
+ 
+-      up_and_out:
+-      out:
+-
++up_and_out:
++out:
+ 	yaffs_GrossUnlock(dev);
+ 
+ 	return 0;
+@@ -1002,12 +1204,19 @@ static int yaffs_readdir(struct file *f,
+ /*
+  * File creation. Allocate an inode, and we're done..
+  */
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29)
++#define YCRED(x) x
++#else
++#define YCRED(x) (x->cred)
++#endif
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode,
+-		       dev_t rdev)
++			dev_t rdev)
+ #else
+ static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode,
+-		       int rdev)
++			int rdev)
+ #endif
+ {
+ 	struct inode *inode;
+@@ -1018,25 +1227,25 @@ static int yaffs_mknod(struct inode *dir
+ 	yaffs_Object *parent = yaffs_InodeToObject(dir);
+ 
+ 	int error = -ENOSPC;
+-	uid_t uid = current->fsuid;
+-	gid_t gid = (dir->i_mode & S_ISGID) ? dir->i_gid : current->fsgid;
++	uid_t uid = YCRED(current)->fsuid;
++	gid_t gid = (dir->i_mode & S_ISGID) ? dir->i_gid : YCRED(current)->fsgid;
+ 
+-	if((dir->i_mode & S_ISGID) && S_ISDIR(mode))
++	if ((dir->i_mode & S_ISGID) && S_ISDIR(mode))
+ 		mode |= S_ISGID;
+ 
+ 	if (parent) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_mknod: parent object %d type %d\n",
+-		   parent->objectId, parent->variantType));
++			("yaffs_mknod: parent object %d type %d\n",
++			parent->objectId, parent->variantType));
+ 	} else {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_mknod: could not get parent object\n"));
++			("yaffs_mknod: could not get parent object\n"));
+ 		return -EPERM;
+ 	}
+ 
+ 	T(YAFFS_TRACE_OS, ("yaffs_mknod: making oject for %s, "
+-			   "mode %x dev %x\n",
+-			   dentry->d_name.name, mode, rdev));
++			"mode %x dev %x\n",
++			dentry->d_name.name, mode, rdev));
+ 
+ 	dev = parent->myDev;
+ 
+@@ -1045,33 +1254,28 @@ static int yaffs_mknod(struct inode *dir
+ 	switch (mode & S_IFMT) {
+ 	default:
+ 		/* Special (socket, fifo, device...) */
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG
+-				   "yaffs_mknod: making special\n"));
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+-		obj =
+-		    yaffs_MknodSpecial(parent, dentry->d_name.name, mode, uid,
+-				       gid, old_encode_dev(rdev));
+-#else
+-		obj =
+-		    yaffs_MknodSpecial(parent, dentry->d_name.name, mode, uid,
+-				       gid, rdev);
++		T(YAFFS_TRACE_OS, ("yaffs_mknod: making special\n"));
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
++		obj = yaffs_MknodSpecial(parent, dentry->d_name.name, mode, uid,
++				gid, old_encode_dev(rdev));
++#else
++		obj = yaffs_MknodSpecial(parent, dentry->d_name.name, mode, uid,
++				gid, rdev);
+ #endif
+ 		break;
+ 	case S_IFREG:		/* file          */
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_mknod: making file\n"));
+-		obj =
+-		    yaffs_MknodFile(parent, dentry->d_name.name, mode, uid,
+-				    gid);
++		T(YAFFS_TRACE_OS, ("yaffs_mknod: making file\n"));
++		obj = yaffs_MknodFile(parent, dentry->d_name.name, mode, uid,
++				gid);
+ 		break;
+ 	case S_IFDIR:		/* directory */
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_mknod: making directory\n"));
+-		obj =
+-		    yaffs_MknodDirectory(parent, dentry->d_name.name, mode,
+-					 uid, gid);
++			("yaffs_mknod: making directory\n"));
++		obj = yaffs_MknodDirectory(parent, dentry->d_name.name, mode,
++					uid, gid);
+ 		break;
+ 	case S_IFLNK:		/* symlink */
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_mknod: making file\n"));
++		T(YAFFS_TRACE_OS, ("yaffs_mknod: making symlink\n"));
+ 		obj = NULL;	/* Do we ever get here? */
+ 		break;
+ 	}
+@@ -1083,12 +1287,12 @@ static int yaffs_mknod(struct inode *dir
+ 		inode = yaffs_get_inode(dir->i_sb, mode, rdev, obj);
+ 		d_instantiate(dentry, inode);
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_mknod created object %d count = %d\n",
+-		   obj->objectId, atomic_read(&inode->i_count)));
++			("yaffs_mknod created object %d count = %d\n",
++			obj->objectId, atomic_read(&inode->i_count)));
+ 		error = 0;
+ 	} else {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_mknod failed making object\n"));
++			("yaffs_mknod failed making object\n"));
+ 		error = -ENOMEM;
+ 	}
+ 
+@@ -1098,25 +1302,19 @@ static int yaffs_mknod(struct inode *dir
+ static int yaffs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
+ {
+ 	int retVal;
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_mkdir\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_mkdir\n"));
+ 	retVal = yaffs_mknod(dir, dentry, mode | S_IFDIR, 0);
+-#if 0
+-	/* attempt to fix dir bug - didn't work */
+-	if (!retVal) {
+-		dget(dentry);
+-	}
+-#endif
+ 	return retVal;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode,
+ 			struct nameidata *n)
+ #else
+ static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode)
+ #endif
+ {
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_create\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_create\n"));
+ 	return yaffs_mknod(dir, dentry, mode | S_IFREG, 0);
+ }
+ 
+@@ -1127,8 +1325,8 @@ static int yaffs_unlink(struct inode *di
+ 	yaffs_Device *dev;
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_unlink %d:%s\n", (int)(dir->i_ino),
+-	   dentry->d_name.name));
++		("yaffs_unlink %d:%s\n", (int)(dir->i_ino),
++		dentry->d_name.name));
+ 
+ 	dev = yaffs_InodeToObject(dir)->myDev;
+ 
+@@ -1151,82 +1349,74 @@ static int yaffs_unlink(struct inode *di
+  * Create a link...
+  */
+ static int yaffs_link(struct dentry *old_dentry, struct inode *dir,
+-		      struct dentry *dentry)
++			struct dentry *dentry)
+ {
+ 	struct inode *inode = old_dentry->d_inode;
+ 	yaffs_Object *obj = NULL;
+ 	yaffs_Object *link = NULL;
+ 	yaffs_Device *dev;
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_link\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_link\n"));
+ 
+ 	obj = yaffs_InodeToObject(inode);
+ 	dev = obj->myDev;
+ 
+ 	yaffs_GrossLock(dev);
+ 
+-	if (!S_ISDIR(inode->i_mode))	/* Don't link directories */
+-	{
+-		link =
+-		    yaffs_Link(yaffs_InodeToObject(dir), dentry->d_name.name,
+-			       obj);
+-	}
++	if (!S_ISDIR(inode->i_mode))		/* Don't link directories */
++		link = yaffs_Link(yaffs_InodeToObject(dir), dentry->d_name.name,
++			obj);
+ 
+ 	if (link) {
+ 		old_dentry->d_inode->i_nlink = yaffs_GetObjectLinkCount(obj);
+ 		d_instantiate(dentry, old_dentry->d_inode);
+ 		atomic_inc(&old_dentry->d_inode->i_count);
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_link link count %d i_count %d\n",
+-		   old_dentry->d_inode->i_nlink,
+-		   atomic_read(&old_dentry->d_inode->i_count)));
+-
++			("yaffs_link link count %d i_count %d\n",
++			old_dentry->d_inode->i_nlink,
++			atomic_read(&old_dentry->d_inode->i_count)));
+ 	}
+ 
+ 	yaffs_GrossUnlock(dev);
+ 
+-	if (link) {
+-
++	if (link)
+ 		return 0;
+-	}
+ 
+ 	return -EPERM;
+ }
+ 
+ static int yaffs_symlink(struct inode *dir, struct dentry *dentry,
+-			 const char *symname)
++				const char *symname)
+ {
+ 	yaffs_Object *obj;
+ 	yaffs_Device *dev;
+-	uid_t uid = current->fsuid;
+-	gid_t gid = (dir->i_mode & S_ISGID) ? dir->i_gid : current->fsgid;
++	uid_t uid = YCRED(current)->fsuid;
++	gid_t gid = (dir->i_mode & S_ISGID) ? dir->i_gid : YCRED(current)->fsgid;
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_symlink\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_symlink\n"));
+ 
+ 	dev = yaffs_InodeToObject(dir)->myDev;
+ 	yaffs_GrossLock(dev);
+ 	obj = yaffs_MknodSymLink(yaffs_InodeToObject(dir), dentry->d_name.name,
+-				 S_IFLNK | S_IRWXUGO, uid, gid, symname);
++				S_IFLNK | S_IRWXUGO, uid, gid, symname);
+ 	yaffs_GrossUnlock(dev);
+ 
+ 	if (obj) {
+-
+ 		struct inode *inode;
+ 
+ 		inode = yaffs_get_inode(dir->i_sb, obj->yst_mode, 0, obj);
+ 		d_instantiate(dentry, inode);
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG "symlink created OK\n"));
++		T(YAFFS_TRACE_OS, ("symlink created OK\n"));
+ 		return 0;
+ 	} else {
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG "symlink not created\n"));
+-
++		T(YAFFS_TRACE_OS, ("symlink not created\n"));
+ 	}
+ 
+ 	return -ENOMEM;
+ }
+ 
+ static int yaffs_sync_object(struct file *file, struct dentry *dentry,
+-			     int datasync)
++				int datasync)
+ {
+ 
+ 	yaffs_Object *obj;
+@@ -1236,7 +1426,7 @@ static int yaffs_sync_object(struct file
+ 
+ 	dev = obj->myDev;
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_sync_object\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_sync_object\n"));
+ 	yaffs_GrossLock(dev);
+ 	yaffs_FlushFile(obj, 1);
+ 	yaffs_GrossUnlock(dev);
+@@ -1255,41 +1445,36 @@ static int yaffs_rename(struct inode *ol
+ 	int retVal = YAFFS_FAIL;
+ 	yaffs_Object *target;
+ 
+-        T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_rename\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_rename\n"));
+ 	dev = yaffs_InodeToObject(old_dir)->myDev;
+ 
+ 	yaffs_GrossLock(dev);
+ 
+ 	/* Check if the target is an existing directory that is not empty. */
+-	target =
+-	    yaffs_FindObjectByName(yaffs_InodeToObject(new_dir),
+-				   new_dentry->d_name.name);
++	target = yaffs_FindObjectByName(yaffs_InodeToObject(new_dir),
++				new_dentry->d_name.name);
+ 
+ 
+ 
+-	if (target &&
+-	    target->variantType == YAFFS_OBJECT_TYPE_DIRECTORY &&
+-	    !list_empty(&target->variant.directoryVariant.children)) {
++	if (target && target->variantType == YAFFS_OBJECT_TYPE_DIRECTORY &&
++		!ylist_empty(&target->variant.directoryVariant.children)) {
+ 
+-	        T(YAFFS_TRACE_OS, (KERN_DEBUG "target is non-empty dir\n"));
++		T(YAFFS_TRACE_OS, ("target is non-empty dir\n"));
+ 
+ 		retVal = YAFFS_FAIL;
+ 	} else {
+-
+ 		/* Now does unlinking internally using shadowing mechanism */
+-	        T(YAFFS_TRACE_OS, (KERN_DEBUG "calling yaffs_RenameObject\n"));
+-
+-		retVal =
+-		    yaffs_RenameObject(yaffs_InodeToObject(old_dir),
+-				       old_dentry->d_name.name,
+-				       yaffs_InodeToObject(new_dir),
+-				       new_dentry->d_name.name);
++		T(YAFFS_TRACE_OS, ("calling yaffs_RenameObject\n"));
+ 
++		retVal = yaffs_RenameObject(yaffs_InodeToObject(old_dir),
++				old_dentry->d_name.name,
++				yaffs_InodeToObject(new_dir),
++				new_dentry->d_name.name);
+ 	}
+ 	yaffs_GrossUnlock(dev);
+ 
+ 	if (retVal == YAFFS_OK) {
+-		if(target) {
++		if (target) {
+ 			new_dentry->d_inode->i_nlink--;
+ 			mark_inode_dirty(new_dentry->d_inode);
+ 		}
+@@ -1298,7 +1483,6 @@ static int yaffs_rename(struct inode *ol
+ 	} else {
+ 		return -ENOTEMPTY;
+ 	}
+-
+ }
+ 
+ static int yaffs_setattr(struct dentry *dentry, struct iattr *attr)
+@@ -1308,15 +1492,15 @@ static int yaffs_setattr(struct dentry *
+ 	yaffs_Device *dev;
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_setattr of object %d\n",
+-	   yaffs_InodeToObject(inode)->objectId));
+-
+-	if ((error = inode_change_ok(inode, attr)) == 0) {
++		("yaffs_setattr of object %d\n",
++		yaffs_InodeToObject(inode)->objectId));
+ 
++	error = inode_change_ok(inode, attr);
++	if (error == 0) {
+ 		dev = yaffs_InodeToObject(inode)->myDev;
+ 		yaffs_GrossLock(dev);
+ 		if (yaffs_SetAttributes(yaffs_InodeToObject(inode), attr) ==
+-		    YAFFS_OK) {
++				YAFFS_OK) {
+ 			error = 0;
+ 		} else {
+ 			error = -EPERM;
+@@ -1328,12 +1512,12 @@ static int yaffs_setattr(struct dentry *
+ 	return error;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_statfs(struct dentry *dentry, struct kstatfs *buf)
+ {
+ 	yaffs_Device *dev = yaffs_DentryToObject(dentry)->myDev;
+ 	struct super_block *sb = dentry->d_sb;
+-#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_statfs(struct super_block *sb, struct kstatfs *buf)
+ {
+ 	yaffs_Device *dev = yaffs_SuperToDevice(sb);
+@@ -1343,32 +1527,53 @@ static int yaffs_statfs(struct super_blo
+ 	yaffs_Device *dev = yaffs_SuperToDevice(sb);
+ #endif
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_statfs\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_statfs\n"));
+ 
+ 	yaffs_GrossLock(dev);
+ 
+ 	buf->f_type = YAFFS_MAGIC;
+ 	buf->f_bsize = sb->s_blocksize;
+ 	buf->f_namelen = 255;
+-	if (sb->s_blocksize > dev->nDataBytesPerChunk) {
++
++	if (dev->nDataBytesPerChunk & (dev->nDataBytesPerChunk - 1)) {
++		/* Do this if chunk size is not a power of 2 */
++
++		uint64_t bytesInDev;
++		uint64_t bytesFree;
++
++		bytesInDev = ((uint64_t)((dev->endBlock - dev->startBlock + 1))) *
++			((uint64_t)(dev->nChunksPerBlock * dev->nDataBytesPerChunk));
++
++		do_div(bytesInDev, sb->s_blocksize); /* bytesInDev becomes the number of blocks */
++		buf->f_blocks = bytesInDev;
++
++		bytesFree  = ((uint64_t)(yaffs_GetNumberOfFreeChunks(dev))) *
++			((uint64_t)(dev->nDataBytesPerChunk));
++
++		do_div(bytesFree, sb->s_blocksize);
++
++		buf->f_bfree = bytesFree;
++
++	} else if (sb->s_blocksize > dev->nDataBytesPerChunk) {
+ 
+ 		buf->f_blocks =
+-		    (dev->endBlock - dev->startBlock +
+-		     1) * dev->nChunksPerBlock / (sb->s_blocksize /
+-						  dev->nDataBytesPerChunk);
++			(dev->endBlock - dev->startBlock + 1) *
++			dev->nChunksPerBlock /
++			(sb->s_blocksize / dev->nDataBytesPerChunk);
+ 		buf->f_bfree =
+-		    yaffs_GetNumberOfFreeChunks(dev) / (sb->s_blocksize /
+-							dev->nDataBytesPerChunk);
++			yaffs_GetNumberOfFreeChunks(dev) /
++			(sb->s_blocksize / dev->nDataBytesPerChunk);
+ 	} else {
+-
+ 		buf->f_blocks =
+-		    (dev->endBlock - dev->startBlock +
+-		     1) * dev->nChunksPerBlock * (dev->nDataBytesPerChunk /
+-						  sb->s_blocksize);
++			(dev->endBlock - dev->startBlock + 1) *
++			dev->nChunksPerBlock *
++			(dev->nDataBytesPerChunk / sb->s_blocksize);
++
+ 		buf->f_bfree =
+-		    yaffs_GetNumberOfFreeChunks(dev) * (dev->nDataBytesPerChunk /
+-							sb->s_blocksize);
++			yaffs_GetNumberOfFreeChunks(dev) *
++			(dev->nDataBytesPerChunk / sb->s_blocksize);
+ 	}
++
+ 	buf->f_files = 0;
+ 	buf->f_ffree = 0;
+ 	buf->f_bavail = buf->f_bfree;
+@@ -1378,18 +1583,19 @@ static int yaffs_statfs(struct super_blo
+ }
+ 
+ 
+-/**
+ static int yaffs_do_sync_fs(struct super_block *sb)
+ {
+ 
+ 	yaffs_Device *dev = yaffs_SuperToDevice(sb);
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_do_sync_fs\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_do_sync_fs\n"));
+ 
+-	if(sb->s_dirt) {
++	if (sb->s_dirt) {
+ 		yaffs_GrossLock(dev);
+ 
+-		if(dev)
++		if (dev) {
++			yaffs_FlushEntireDeviceCache(dev);
+ 			yaffs_CheckpointSave(dev);
++		}
+ 
+ 		yaffs_GrossUnlock(dev);
+ 
+@@ -1397,35 +1603,73 @@ static int yaffs_do_sync_fs(struct super
+ 	}
+ 	return 0;
+ }
+-**/
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static void yaffs_write_super(struct super_block *sb)
+ #else
+ static int yaffs_write_super(struct super_block *sb)
+ #endif
+ {
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_write_super\n"));
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18))
+-	return 0; /* yaffs_do_sync_fs(sb);*/
++	T(YAFFS_TRACE_OS, ("yaffs_write_super\n"));
++	if (yaffs_auto_checkpoint >= 2)
++		yaffs_do_sync_fs(sb);
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 18))
++	return 0;
+ #endif
+ }
+ 
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_sync_fs(struct super_block *sb, int wait)
+ #else
+ static int yaffs_sync_fs(struct super_block *sb)
+ #endif
+ {
++	T(YAFFS_TRACE_OS, ("yaffs_sync_fs\n"));
++
++	if (yaffs_auto_checkpoint >= 1)
++		yaffs_do_sync_fs(sb);
++
++	return 0;
++}
++
++#ifdef YAFFS_USE_OWN_IGET
++
++static struct inode *yaffs_iget(struct super_block *sb, unsigned long ino)
++{
++	struct inode *inode;
++	yaffs_Object *obj;
++	yaffs_Device *dev = yaffs_SuperToDevice(sb);
++
++	T(YAFFS_TRACE_OS,
++		("yaffs_iget for %lu\n", ino));
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_sync_fs\n"));
++	inode = iget_locked(sb, ino);
++	if (!inode)
++		return ERR_PTR(-ENOMEM);
++	if (!(inode->i_state & I_NEW))
++		return inode;
++
++	/* NB This is called as a side effect of other functions, but
++	 * we had to release the lock to prevent deadlocks, so
++	 * need to lock again.
++	 */
+ 
+-	return 0; /* yaffs_do_sync_fs(sb);*/
++	yaffs_GrossLock(dev);
+ 
++	obj = yaffs_FindObjectByNumber(dev, inode->i_ino);
++
++	yaffs_FillInodeFromObject(inode, obj);
++
++	yaffs_GrossUnlock(dev);
++
++	unlock_new_inode(inode);
++	return inode;
+ }
+ 
++#else
+ 
+ static void yaffs_read_inode(struct inode *inode)
+ {
+@@ -1438,7 +1682,7 @@ static void yaffs_read_inode(struct inod
+ 	yaffs_Device *dev = yaffs_SuperToDevice(inode->i_sb);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_read_inode for %d\n", (int)inode->i_ino));
++		("yaffs_read_inode for %d\n", (int)inode->i_ino));
+ 
+ 	yaffs_GrossLock(dev);
+ 
+@@ -1449,18 +1693,20 @@ static void yaffs_read_inode(struct inod
+ 	yaffs_GrossUnlock(dev);
+ }
+ 
+-static LIST_HEAD(yaffs_dev_list);
++#endif
++
++static YLIST_HEAD(yaffs_dev_list);
+ 
+-#if 0 // not used
++#if 0 /* not used */
+ static int yaffs_remount_fs(struct super_block *sb, int *flags, char *data)
+ {
+ 	yaffs_Device    *dev = yaffs_SuperToDevice(sb);
+ 
+-	if( *flags & MS_RDONLY ) {
++	if (*flags & MS_RDONLY) {
+ 		struct mtd_info *mtd = yaffs_SuperToDevice(sb)->genericDevice;
+ 
+ 		T(YAFFS_TRACE_OS,
+-			(KERN_DEBUG "yaffs_remount_fs: %s: RO\n", dev->name ));
++			("yaffs_remount_fs: %s: RO\n", dev->name));
+ 
+ 		yaffs_GrossLock(dev);
+ 
+@@ -1472,10 +1718,9 @@ static int yaffs_remount_fs(struct super
+ 			mtd->sync(mtd);
+ 
+ 		yaffs_GrossUnlock(dev);
+-	}
+-	else {
++	} else {
+ 		T(YAFFS_TRACE_OS,
+-			(KERN_DEBUG "yaffs_remount_fs: %s: RW\n", dev->name ));
++			("yaffs_remount_fs: %s: RW\n", dev->name));
+ 	}
+ 
+ 	return 0;
+@@ -1486,7 +1731,7 @@ static void yaffs_put_super(struct super
+ {
+ 	yaffs_Device *dev = yaffs_SuperToDevice(sb);
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_put_super\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_put_super\n"));
+ 
+ 	yaffs_GrossLock(dev);
+ 
+@@ -1494,18 +1739,17 @@ static void yaffs_put_super(struct super
+ 
+ 	yaffs_CheckpointSave(dev);
+ 
+-	if (dev->putSuperFunc) {
++	if (dev->putSuperFunc)
+ 		dev->putSuperFunc(sb);
+-	}
+ 
+ 	yaffs_Deinitialise(dev);
+ 
+ 	yaffs_GrossUnlock(dev);
+ 
+ 	/* we assume this is protected by lock_kernel() in mount/umount */
+-	list_del(&dev->devList);
++	ylist_del(&dev->devList);
+ 
+-	if(dev->spareBuffer){
++	if (dev->spareBuffer) {
+ 		YFREE(dev->spareBuffer);
+ 		dev->spareBuffer = NULL;
+ 	}
+@@ -1516,12 +1760,10 @@ static void yaffs_put_super(struct super
+ 
+ static void yaffs_MTDPutSuper(struct super_block *sb)
+ {
+-
+ 	struct mtd_info *mtd = yaffs_SuperToDevice(sb)->genericDevice;
+ 
+-	if (mtd->sync) {
++	if (mtd->sync)
+ 		mtd->sync(mtd);
+-	}
+ 
+ 	put_mtd_device(mtd);
+ }
+@@ -1531,9 +1773,9 @@ static void yaffs_MarkSuperBlockDirty(vo
+ {
+ 	struct super_block *sb = (struct super_block *)vsb;
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_MarkSuperBlockDirty() sb = %p\n",sb));
+-//	if(sb)
+-//		sb->s_dirt = 1;
++	T(YAFFS_TRACE_OS, ("yaffs_MarkSuperBlockDirty() sb = %p\n", sb));
++	if (sb)
++		sb->s_dirt = 1;
+ }
+ 
+ typedef struct {
+@@ -1546,48 +1788,48 @@ typedef struct {
+ #define MAX_OPT_LEN 20
+ static int yaffs_parse_options(yaffs_options *options, const char *options_str)
+ {
+-	char cur_opt[MAX_OPT_LEN+1];
++	char cur_opt[MAX_OPT_LEN + 1];
+ 	int p;
+ 	int error = 0;
+ 
+ 	/* Parse through the options which is a comma seperated list */
+ 
+-	while(options_str && *options_str && !error){
+-		memset(cur_opt,0,MAX_OPT_LEN+1);
++	while (options_str && *options_str && !error) {
++		memset(cur_opt, 0, MAX_OPT_LEN + 1);
+ 		p = 0;
+ 
+-		while(*options_str && *options_str != ','){
+-			if(p < MAX_OPT_LEN){
++		while (*options_str && *options_str != ',') {
++			if (p < MAX_OPT_LEN) {
+ 				cur_opt[p] = *options_str;
+ 				p++;
+ 			}
+ 			options_str++;
+ 		}
+ 
+-		if(!strcmp(cur_opt,"inband-tags"))
++		if (!strcmp(cur_opt, "inband-tags"))
+ 			options->inband_tags = 1;
+-		else if(!strcmp(cur_opt,"no-cache"))
++		else if (!strcmp(cur_opt, "no-cache"))
+ 			options->no_cache = 1;
+-		else if(!strcmp(cur_opt,"no-checkpoint-read"))
++		else if (!strcmp(cur_opt, "no-checkpoint-read"))
+ 			options->skip_checkpoint_read = 1;
+-		else if(!strcmp(cur_opt,"no-checkpoint-write"))
++		else if (!strcmp(cur_opt, "no-checkpoint-write"))
+ 			options->skip_checkpoint_write = 1;
+-		else if(!strcmp(cur_opt,"no-checkpoint")){
++		else if (!strcmp(cur_opt, "no-checkpoint")) {
+ 			options->skip_checkpoint_read = 1;
+ 			options->skip_checkpoint_write = 1;
+ 		} else {
+-			printk(KERN_INFO "yaffs: Bad mount option \"%s\"\n",cur_opt);
++			printk(KERN_INFO "yaffs: Bad mount option \"%s\"\n",
++					cur_opt);
+ 			error = 1;
+ 		}
+-
+ 	}
+ 
+ 	return error;
+ }
+ 
+ static struct super_block *yaffs_internal_read_super(int yaffsVersion,
+-						     struct super_block *sb,
+-						     void *data, int silent)
++						struct super_block *sb,
++						void *data, int silent)
+ {
+ 	int nBlocks;
+ 	struct inode *inode = NULL;
+@@ -1602,6 +1844,7 @@ static struct super_block *yaffs_interna
+ 
+ 	sb->s_magic = YAFFS_MAGIC;
+ 	sb->s_op = &yaffs_super_ops;
++	sb->s_flags |= MS_NOATIME;
+ 
+ 	if (!sb)
+ 		printk(KERN_INFO "yaffs: sb is NULL\n");
+@@ -1614,14 +1857,14 @@ static struct super_block *yaffs_interna
+ 		       sb->s_dev,
+ 		       yaffs_devname(sb, devname_buf));
+ 
+-	if(!data_str)
++	if (!data_str)
+ 		data_str = "";
+ 
+-	printk(KERN_INFO "yaffs: passed flags \"%s\"\n",data_str);
++	printk(KERN_INFO "yaffs: passed flags \"%s\"\n", data_str);
+ 
+-	memset(&options,0,sizeof(options));
++	memset(&options, 0, sizeof(options));
+ 
+-	if(yaffs_parse_options(&options,data_str)){
++	if (yaffs_parse_options(&options, data_str)) {
+ 		/* Option parsing failed */
+ 		return NULL;
+ 	}
+@@ -1645,9 +1888,9 @@ static struct super_block *yaffs_interna
+ 			       yaffs_devname(sb, devname_buf)));
+ 
+ 	/* Check it's an mtd device..... */
+-	if (MAJOR(sb->s_dev) != MTD_BLOCK_MAJOR) {
++	if (MAJOR(sb->s_dev) != MTD_BLOCK_MAJOR)
+ 		return NULL;	/* This isn't an mtd device */
+-	}
++
+ 	/* Get the device */
+ 	mtd = get_mtd_device(NULL, MINOR(sb->s_dev));
+ 	if (!mtd) {
+@@ -1673,29 +1916,23 @@ static struct super_block *yaffs_interna
+ 	T(YAFFS_TRACE_OS, (" %s %d\n", WRITE_SIZE_STR, WRITE_SIZE(mtd)));
+ 	T(YAFFS_TRACE_OS, (" oobsize %d\n", mtd->oobsize));
+ 	T(YAFFS_TRACE_OS, (" erasesize %d\n", mtd->erasesize));
+-	T(YAFFS_TRACE_OS, (" size %d\n", mtd->size));
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29)
++	T(YAFFS_TRACE_OS, (" size %u\n", mtd->size));
++#else
++	T(YAFFS_TRACE_OS, (" size %lld\n", mtd->size));
++#endif
+ 
+ #ifdef CONFIG_YAFFS_AUTO_YAFFS2
+ 
+-	if (yaffsVersion == 1 &&
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-	    mtd->writesize >= 2048) {
+-#else
+-	    mtd->oobblock >= 2048) {
+-#endif
+-	    T(YAFFS_TRACE_ALWAYS,("yaffs: auto selecting yaffs2\n"));
+-	    yaffsVersion = 2;
++	if (yaffsVersion == 1 && WRITE_SIZE(mtd) >= 2048) {
++		T(YAFFS_TRACE_ALWAYS, ("yaffs: auto selecting yaffs2\n"));
++		yaffsVersion = 2;
+ 	}
+ 
+ 	/* Added NCB 26/5/2006 for completeness */
+-	if (yaffsVersion == 2 &&
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-	    mtd->writesize == 512) {
+-#else
+-	    mtd->oobblock == 512) {
+-#endif
+-	    T(YAFFS_TRACE_ALWAYS,("yaffs: auto selecting yaffs1\n"));
+-	    yaffsVersion = 1;
++	if (yaffsVersion == 2 && !options.inband_tags && WRITE_SIZE(mtd) == 512) {
++		T(YAFFS_TRACE_ALWAYS, ("yaffs: auto selecting yaffs1\n"));
++		yaffsVersion = 1;
+ 	}
+ 
+ #endif
+@@ -1707,7 +1944,7 @@ static struct super_block *yaffs_interna
+ 		    !mtd->block_markbad ||
+ 		    !mtd->read ||
+ 		    !mtd->write ||
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ 		    !mtd->read_oob || !mtd->write_oob) {
+ #else
+ 		    !mtd->write_ecc ||
+@@ -1719,12 +1956,9 @@ static struct super_block *yaffs_interna
+ 			return NULL;
+ 		}
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-		if (mtd->writesize < YAFFS_MIN_YAFFS2_CHUNK_SIZE ||
+-#else
+-		if (mtd->oobblock < YAFFS_MIN_YAFFS2_CHUNK_SIZE ||
+-#endif
+-		    mtd->oobsize < YAFFS_MIN_YAFFS2_SPARE_SIZE) {
++		if ((WRITE_SIZE(mtd) < YAFFS_MIN_YAFFS2_CHUNK_SIZE ||
++		    mtd->oobsize < YAFFS_MIN_YAFFS2_SPARE_SIZE) &&
++		    !options.inband_tags) {
+ 			T(YAFFS_TRACE_ALWAYS,
+ 			  ("yaffs: MTD device does not have the "
+ 			   "right page sizes\n"));
+@@ -1735,7 +1969,7 @@ static struct super_block *yaffs_interna
+ 		if (!mtd->erase ||
+ 		    !mtd->read ||
+ 		    !mtd->write ||
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ 		    !mtd->read_oob || !mtd->write_oob) {
+ #else
+ 		    !mtd->write_ecc ||
+@@ -1761,7 +1995,7 @@ static struct super_block *yaffs_interna
+ 	 * Set the yaffs_Device up for mtd
+ 	 */
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 	sb->s_fs_info = dev = kmalloc(sizeof(yaffs_Device), GFP_KERNEL);
+ #else
+ 	sb->u.generic_sbp = dev = kmalloc(sizeof(yaffs_Device), GFP_KERNEL);
+@@ -1780,13 +2014,15 @@ static struct super_block *yaffs_interna
+ 
+ 	/* Set up the memory size parameters.... */
+ 
+-	nBlocks = mtd->size / (YAFFS_CHUNKS_PER_BLOCK * YAFFS_BYTES_PER_CHUNK);
++	nBlocks = YCALCBLOCKS(mtd->size, (YAFFS_CHUNKS_PER_BLOCK * YAFFS_BYTES_PER_CHUNK));
++
+ 	dev->startBlock = 0;
+ 	dev->endBlock = nBlocks - 1;
+ 	dev->nChunksPerBlock = YAFFS_CHUNKS_PER_BLOCK;
+-	dev->nDataBytesPerChunk = YAFFS_BYTES_PER_CHUNK;
++	dev->totalBytesPerChunk = YAFFS_BYTES_PER_CHUNK;
+ 	dev->nReservedBlocks = 5;
+ 	dev->nShortOpCaches = (options.no_cache) ? 0 : 10;
++	dev->inbandTags = options.inband_tags;
+ 
+ 	/* ... and the functions. */
+ 	if (yaffsVersion == 2) {
+@@ -1798,20 +2034,19 @@ static struct super_block *yaffs_interna
+ 		dev->queryNANDBlock = nandmtd2_QueryNANDBlock;
+ 		dev->spareBuffer = YMALLOC(mtd->oobsize);
+ 		dev->isYaffs2 = 1;
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-		dev->nDataBytesPerChunk = mtd->writesize;
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
++		dev->totalBytesPerChunk = mtd->writesize;
+ 		dev->nChunksPerBlock = mtd->erasesize / mtd->writesize;
+ #else
+-		dev->nDataBytesPerChunk = mtd->oobblock;
++		dev->totalBytesPerChunk = mtd->oobblock;
+ 		dev->nChunksPerBlock = mtd->erasesize / mtd->oobblock;
+ #endif
+-		nBlocks = mtd->size / mtd->erasesize;
++		nBlocks = YCALCBLOCKS(mtd->size, mtd->erasesize);
+ 
+-		dev->nCheckpointReservedBlocks = CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS;
+ 		dev->startBlock = 0;
+ 		dev->endBlock = nBlocks - 1;
+ 	} else {
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ 		/* use the MTD interface in yaffs_mtdif1.c */
+ 		dev->writeChunkWithTagsToNAND =
+ 			nandmtd1_WriteChunkWithTagsToNAND;
+@@ -1847,7 +2082,7 @@ static struct super_block *yaffs_interna
+ 	dev->skipCheckpointWrite = options.skip_checkpoint_write;
+ 
+ 	/* we assume this is protected by lock_kernel() in mount/umount */
+-	list_add_tail(&dev->devList, &yaffs_dev_list);
++	ylist_add_tail(&dev->devList, &yaffs_dev_list);
+ 
+ 	init_MUTEX(&dev->grossLock);
+ 
+@@ -1884,20 +2119,23 @@ static struct super_block *yaffs_interna
+ 		return NULL;
+ 	}
+ 	sb->s_root = root;
++	sb->s_dirt = !dev->isCheckpointed;
++	T(YAFFS_TRACE_ALWAYS,
++	  ("yaffs_read_super: isCheckpointed %d\n", dev->isCheckpointed));
+ 
+ 	T(YAFFS_TRACE_OS, ("yaffs_read_super: done\n"));
+ 	return sb;
+ }
+ 
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_internal_read_super_mtd(struct super_block *sb, void *data,
+ 					 int silent)
+ {
+ 	return yaffs_internal_read_super(1, sb, data, silent) ? 0 : -EINVAL;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_read_super(struct file_system_type *fs,
+ 			    int flags, const char *dev_name,
+ 			    void *data, struct vfsmount *mnt)
+@@ -1938,14 +2176,14 @@ static DECLARE_FSTYPE(yaffs_fs_type, "ya
+ 
+ #ifdef CONFIG_YAFFS_YAFFS2
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs2_internal_read_super_mtd(struct super_block *sb, void *data,
+ 					  int silent)
+ {
+ 	return yaffs_internal_read_super(2, sb, data, silent) ? 0 : -EINVAL;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs2_read_super(struct file_system_type *fs,
+ 			int flags, const char *dev_name, void *data,
+ 			struct vfsmount *mnt)
+@@ -1990,12 +2228,12 @@ static char *yaffs_dump_dev(char *buf, y
+ {
+ 	buf += sprintf(buf, "startBlock......... %d\n", dev->startBlock);
+ 	buf += sprintf(buf, "endBlock........... %d\n", dev->endBlock);
++	buf += sprintf(buf, "totalBytesPerChunk. %d\n", dev->totalBytesPerChunk);
+ 	buf += sprintf(buf, "nDataBytesPerChunk. %d\n", dev->nDataBytesPerChunk);
+ 	buf += sprintf(buf, "chunkGroupBits..... %d\n", dev->chunkGroupBits);
+ 	buf += sprintf(buf, "chunkGroupSize..... %d\n", dev->chunkGroupSize);
+ 	buf += sprintf(buf, "nErasedBlocks...... %d\n", dev->nErasedBlocks);
+ 	buf += sprintf(buf, "nReservedBlocks.... %d\n", dev->nReservedBlocks);
+-	buf += sprintf(buf, "nCheckptResBlocks.. %d\n", dev->nCheckpointReservedBlocks);
+ 	buf += sprintf(buf, "blocksInCheckpoint. %d\n", dev->blocksInCheckpoint);
+ 	buf += sprintf(buf, "nTnodesCreated..... %d\n", dev->nTnodesCreated);
+ 	buf += sprintf(buf, "nFreeTnodes........ %d\n", dev->nFreeTnodes);
+@@ -2006,10 +2244,8 @@ static char *yaffs_dump_dev(char *buf, y
+ 	buf += sprintf(buf, "nPageReads......... %d\n", dev->nPageReads);
+ 	buf += sprintf(buf, "nBlockErasures..... %d\n", dev->nBlockErasures);
+ 	buf += sprintf(buf, "nGCCopies.......... %d\n", dev->nGCCopies);
+-	buf +=
+-	    sprintf(buf, "garbageCollections. %d\n", dev->garbageCollections);
+-	buf +=
+-	    sprintf(buf, "passiveGCs......... %d\n",
++	buf += sprintf(buf, "garbageCollections. %d\n", dev->garbageCollections);
++	buf += sprintf(buf, "passiveGCs......... %d\n",
+ 		    dev->passiveGarbageCollections);
+ 	buf += sprintf(buf, "nRetriedWrites..... %d\n", dev->nRetriedWrites);
+ 	buf += sprintf(buf, "nShortOpCaches..... %d\n", dev->nShortOpCaches);
+@@ -2025,6 +2261,7 @@ static char *yaffs_dump_dev(char *buf, y
+ 	    sprintf(buf, "nBackgroudDeletions %d\n", dev->nBackgroundDeletions);
+ 	buf += sprintf(buf, "useNANDECC......... %d\n", dev->useNANDECC);
+ 	buf += sprintf(buf, "isYaffs2........... %d\n", dev->isYaffs2);
++	buf += sprintf(buf, "inbandTags......... %d\n", dev->inbandTags);
+ 
+ 	return buf;
+ }
+@@ -2033,7 +2270,7 @@ static int yaffs_proc_read(char *page,
+ 			   char **start,
+ 			   off_t offset, int count, int *eof, void *data)
+ {
+-	struct list_head *item;
++	struct ylist_head *item;
+ 	char *buf = page;
+ 	int step = offset;
+ 	int n = 0;
+@@ -2057,8 +2294,8 @@ static int yaffs_proc_read(char *page,
+ 	lock_kernel();
+ 
+ 	/* Locate and print the Nth entry.  Order N-squared but N is small. */
+-	list_for_each(item, &yaffs_dev_list) {
+-		yaffs_Device *dev = list_entry(item, yaffs_Device, devList);
++	ylist_for_each(item, &yaffs_dev_list) {
++		yaffs_Device *dev = ylist_entry(item, yaffs_Device, devList);
+ 		if (n < step) {
+ 			n++;
+ 			continue;
+@@ -2119,7 +2356,7 @@ static int yaffs_proc_write(struct file 
+ 	char *end;
+ 	char *mask_name;
+ 	const char *x;
+-	char substring[MAX_MASK_NAME_LENGTH+1];
++	char substring[MAX_MASK_NAME_LENGTH + 1];
+ 	int i;
+ 	int done = 0;
+ 	int add, len = 0;
+@@ -2129,9 +2366,8 @@ static int yaffs_proc_write(struct file 
+ 
+ 	while (!done && (pos < count)) {
+ 		done = 1;
+-		while ((pos < count) && isspace(buf[pos])) {
++		while ((pos < count) && isspace(buf[pos]))
+ 			pos++;
+-		}
+ 
+ 		switch (buf[pos]) {
+ 		case '+':
+@@ -2148,20 +2384,21 @@ static int yaffs_proc_write(struct file 
+ 		mask_name = NULL;
+ 
+ 		mask_bitfield = simple_strtoul(buf + pos, &end, 0);
++
+ 		if (end > buf + pos) {
+ 			mask_name = "numeral";
+ 			len = end - (buf + pos);
+ 			pos += len;
+ 			done = 0;
+ 		} else {
+-			for(x = buf + pos, i = 0;
+-			    (*x == '_' || (*x >='a' && *x <= 'z')) &&
+-			    i <MAX_MASK_NAME_LENGTH; x++, i++, pos++)
+-			    substring[i] = *x;
++			for (x = buf + pos, i = 0;
++			    (*x == '_' || (*x >= 'a' && *x <= 'z')) &&
++			    i < MAX_MASK_NAME_LENGTH; x++, i++, pos++)
++				substring[i] = *x;
+ 			substring[i] = '\0';
+ 
+ 			for (i = 0; mask_flags[i].mask_name != NULL; i++) {
+-				if(strcmp(substring,mask_flags[i].mask_name) == 0){
++				if (strcmp(substring, mask_flags[i].mask_name) == 0) {
+ 					mask_name = mask_flags[i].mask_name;
+ 					mask_bitfield = mask_flags[i].mask_bitfield;
+ 					done = 0;
+@@ -2172,7 +2409,7 @@ static int yaffs_proc_write(struct file 
+ 
+ 		if (mask_name != NULL) {
+ 			done = 0;
+-			switch(add) {
++			switch (add) {
+ 			case '-':
+ 				rg &= ~mask_bitfield;
+ 				break;
+@@ -2191,13 +2428,13 @@ static int yaffs_proc_write(struct file 
+ 
+ 	yaffs_traceMask = rg | YAFFS_TRACE_ALWAYS;
+ 
+-	printk("new trace = 0x%08X\n",yaffs_traceMask);
++	printk(KERN_DEBUG "new trace = 0x%08X\n", yaffs_traceMask);
+ 
+ 	if (rg & YAFFS_TRACE_ALWAYS) {
+ 		for (i = 0; mask_flags[i].mask_name != NULL; i++) {
+ 			char flag;
+ 			flag = ((rg & mask_flags[i].mask_bitfield) == mask_flags[i].mask_bitfield) ? '+' : '-';
+-			printk("%c%s\n", flag, mask_flags[i].mask_name);
++			printk(KERN_DEBUG "%c%s\n", flag, mask_flags[i].mask_name);
+ 		}
+ 	}
+ 
+@@ -2211,12 +2448,8 @@ struct file_system_to_install {
+ };
+ 
+ static struct file_system_to_install fs_to_install[] = {
+-//#ifdef CONFIG_YAFFS_YAFFS1
+ 	{&yaffs_fs_type, 0},
+-//#endif
+-//#ifdef CONFIG_YAFFS_YAFFS2
+ 	{&yaffs2_fs_type, 0},
+-//#endif
+ 	{NULL, 0}
+ };
+ 
+@@ -2231,15 +2464,14 @@ static int __init init_yaffs_fs(void)
+ 	/* Install the proc_fs entry */
+ 	my_proc_entry = create_proc_entry("yaffs",
+ 					       S_IRUGO | S_IFREG,
+-					       &proc_root);
++					       YPROC_ROOT);
+ 
+ 	if (my_proc_entry) {
+ 		my_proc_entry->write_proc = yaffs_proc_write;
+ 		my_proc_entry->read_proc = yaffs_proc_read;
+ 		my_proc_entry->data = NULL;
+-	} else {
++	} else
+ 		return -ENOMEM;
+-	}
+ 
+ 	/* Now add the file system entries */
+ 
+@@ -2247,9 +2479,8 @@ static int __init init_yaffs_fs(void)
+ 
+ 	while (fsinst->fst && !error) {
+ 		error = register_filesystem(fsinst->fst);
+-		if (!error) {
++		if (!error)
+ 			fsinst->installed = 1;
+-		}
+ 		fsinst++;
+ 	}
+ 
+@@ -2277,7 +2508,7 @@ static void __exit exit_yaffs_fs(void)
+ 	T(YAFFS_TRACE_ALWAYS, ("yaffs " __DATE__ " " __TIME__
+ 			       " removing. \n"));
+ 
+-	remove_proc_entry("yaffs", &proc_root);
++	remove_proc_entry("yaffs", YPROC_ROOT);
+ 
+ 	fsinst = fs_to_install;
+ 
+@@ -2288,7 +2519,6 @@ static void __exit exit_yaffs_fs(void)
+ 		}
+ 		fsinst++;
+ 	}
+-
+ }
+ 
+ module_init(init_yaffs_fs)
+--- /dev/null
++++ b/fs/yaffs2/yaffs_getblockinfo.h
+@@ -0,0 +1,34 @@
++/*
++ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
++ *
++ * Copyright (C) 2002-2007 Aleph One Ltd.
++ *   for Toby Churchill Ltd and Brightstar Engineering
++ *
++ * Created by Charles Manning <charles@aleph1.co.uk>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU Lesser General Public License version 2.1 as
++ * published by the Free Software Foundation.
++ *
++ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
++ */
++
++#ifndef __YAFFS_GETBLOCKINFO_H__
++#define __YAFFS_GETBLOCKINFO_H__
++
++#include "yaffs_guts.h"
++
++/* Function to manipulate block info */
++static Y_INLINE yaffs_BlockInfo *yaffs_GetBlockInfo(yaffs_Device * dev, int blk)
++{
++	if (blk < dev->internalStartBlock || blk > dev->internalEndBlock) {
++		T(YAFFS_TRACE_ERROR,
++		  (TSTR
++		   ("**>> yaffs: getBlockInfo block %d is not valid" TENDSTR),
++		   blk));
++		YBUG();
++	}
++	return &dev->blockInfo[blk - dev->internalStartBlock];
++}
++
++#endif
+--- a/fs/yaffs2/yaffs_guts.c
++++ b/fs/yaffs2/yaffs_guts.c
+@@ -12,16 +12,17 @@
+  */
+ 
+ const char *yaffs_guts_c_version =
+-    "$Id: yaffs_guts.c,v 1.49 2007-05-15 20:07:40 charles Exp $";
++    "$Id: yaffs_guts.c,v 1.82 2009-03-09 04:24:17 charles Exp $";
+ 
+ #include "yportenv.h"
+ 
+ #include "yaffsinterface.h"
+ #include "yaffs_guts.h"
+ #include "yaffs_tagsvalidity.h"
++#include "yaffs_getblockinfo.h"
+ 
+ #include "yaffs_tagscompat.h"
+-#ifndef  CONFIG_YAFFS_USE_OWN_SORT
++#ifndef CONFIG_YAFFS_USE_OWN_SORT
+ #include "yaffs_qsort.h"
+ #endif
+ #include "yaffs_nand.h"
+@@ -32,116 +33,116 @@ const char *yaffs_guts_c_version =
+ #include "yaffs_packedtags2.h"
+ 
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-void yfsd_LockYAFFS(BOOL fsLockOnly);
+-void yfsd_UnlockYAFFS(BOOL fsLockOnly);
+-#endif
+-
+ #define YAFFS_PASSIVE_GC_CHUNKS 2
+ 
+ #include "yaffs_ecc.h"
+ 
+ 
+ /* Robustification (if it ever comes about...) */
+-static void yaffs_RetireBlock(yaffs_Device * dev, int blockInNAND);
+-static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND, int erasedOk);
+-static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+-				     const __u8 * data,
+-				     const yaffs_ExtendedTags * tags);
+-static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+-				    const yaffs_ExtendedTags * tags);
++static void yaffs_RetireBlock(yaffs_Device *dev, int blockInNAND);
++static void yaffs_HandleWriteChunkError(yaffs_Device *dev, int chunkInNAND,
++		int erasedOk);
++static void yaffs_HandleWriteChunkOk(yaffs_Device *dev, int chunkInNAND,
++				const __u8 *data,
++				const yaffs_ExtendedTags *tags);
++static void yaffs_HandleUpdateChunk(yaffs_Device *dev, int chunkInNAND,
++				const yaffs_ExtendedTags *tags);
+ 
+ /* Other local prototypes */
+-static int yaffs_UnlinkObject( yaffs_Object *obj);
++static int yaffs_UnlinkObject(yaffs_Object *obj);
+ static int yaffs_ObjectHasCachedWriteData(yaffs_Object *obj);
+ 
+ static void yaffs_HardlinkFixup(yaffs_Device *dev, yaffs_Object *hardList);
+ 
+-static int yaffs_WriteNewChunkWithTagsToNAND(yaffs_Device * dev,
+-					     const __u8 * buffer,
+-					     yaffs_ExtendedTags * tags,
+-					     int useReserve);
+-static int yaffs_PutChunkIntoFile(yaffs_Object * in, int chunkInInode,
+-				  int chunkInNAND, int inScan);
+-
+-static yaffs_Object *yaffs_CreateNewObject(yaffs_Device * dev, int number,
+-					   yaffs_ObjectType type);
+-static void yaffs_AddObjectToDirectory(yaffs_Object * directory,
+-				       yaffs_Object * obj);
+-static int yaffs_UpdateObjectHeader(yaffs_Object * in, const YCHAR * name,
+-				    int force, int isShrink, int shadows);
+-static void yaffs_RemoveObjectFromDirectory(yaffs_Object * obj);
++static int yaffs_WriteNewChunkWithTagsToNAND(yaffs_Device *dev,
++					const __u8 *buffer,
++					yaffs_ExtendedTags *tags,
++					int useReserve);
++static int yaffs_PutChunkIntoFile(yaffs_Object *in, int chunkInInode,
++				int chunkInNAND, int inScan);
++
++static yaffs_Object *yaffs_CreateNewObject(yaffs_Device *dev, int number,
++					yaffs_ObjectType type);
++static void yaffs_AddObjectToDirectory(yaffs_Object *directory,
++				yaffs_Object *obj);
++static int yaffs_UpdateObjectHeader(yaffs_Object *in, const YCHAR *name,
++				int force, int isShrink, int shadows);
++static void yaffs_RemoveObjectFromDirectory(yaffs_Object *obj);
+ static int yaffs_CheckStructures(void);
+-static int yaffs_DeleteWorker(yaffs_Object * in, yaffs_Tnode * tn, __u32 level,
+-			      int chunkOffset, int *limit);
+-static int yaffs_DoGenericObjectDeletion(yaffs_Object * in);
+-
+-static yaffs_BlockInfo *yaffs_GetBlockInfo(yaffs_Device * dev, int blockNo);
+-
+-static __u8 *yaffs_GetTempBuffer(yaffs_Device * dev, int lineNo);
+-static void yaffs_ReleaseTempBuffer(yaffs_Device * dev, __u8 * buffer,
+-				    int lineNo);
++static int yaffs_DeleteWorker(yaffs_Object *in, yaffs_Tnode *tn, __u32 level,
++			int chunkOffset, int *limit);
++static int yaffs_DoGenericObjectDeletion(yaffs_Object *in);
++
++static yaffs_BlockInfo *yaffs_GetBlockInfo(yaffs_Device *dev, int blockNo);
+ 
+-static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev,
+-				  int chunkInNAND);
+ 
+-static int yaffs_UnlinkWorker(yaffs_Object * obj);
+-static void yaffs_DestroyObject(yaffs_Object * obj);
++static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev,
++				int chunkInNAND);
+ 
+-static int yaffs_TagsMatch(const yaffs_ExtendedTags * tags, int objectId,
+-			   int chunkInObject);
++static int yaffs_UnlinkWorker(yaffs_Object *obj);
+ 
+-loff_t yaffs_GetFileSize(yaffs_Object * obj);
++static int yaffs_TagsMatch(const yaffs_ExtendedTags *tags, int objectId,
++			int chunkInObject);
+ 
+-static int yaffs_AllocateChunk(yaffs_Device * dev, int useReserve, yaffs_BlockInfo **blockUsedPtr);
++static int yaffs_AllocateChunk(yaffs_Device *dev, int useReserve,
++				yaffs_BlockInfo **blockUsedPtr);
+ 
+-static void yaffs_VerifyFreeChunks(yaffs_Device * dev);
++static void yaffs_VerifyFreeChunks(yaffs_Device *dev);
+ 
+ static void yaffs_CheckObjectDetailsLoaded(yaffs_Object *in);
+ 
++static void yaffs_VerifyDirectory(yaffs_Object *directory);
+ #ifdef YAFFS_PARANOID
+-static int yaffs_CheckFileSanity(yaffs_Object * in);
++static int yaffs_CheckFileSanity(yaffs_Object *in);
+ #else
+ #define yaffs_CheckFileSanity(in)
+ #endif
+ 
+-static void yaffs_InvalidateWholeChunkCache(yaffs_Object * in);
+-static void yaffs_InvalidateChunkCache(yaffs_Object * object, int chunkId);
++static void yaffs_InvalidateWholeChunkCache(yaffs_Object *in);
++static void yaffs_InvalidateChunkCache(yaffs_Object *object, int chunkId);
+ 
+ static void yaffs_InvalidateCheckpoint(yaffs_Device *dev);
+ 
+-static int yaffs_FindChunkInFile(yaffs_Object * in, int chunkInInode,
+-				 yaffs_ExtendedTags * tags);
++static int yaffs_FindChunkInFile(yaffs_Object *in, int chunkInInode,
++				yaffs_ExtendedTags *tags);
+ 
+-static __u32 yaffs_GetChunkGroupBase(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos);
+-static yaffs_Tnode *yaffs_FindLevel0Tnode(yaffs_Device * dev,
+-					  yaffs_FileStructure * fStruct,
+-					  __u32 chunkId);
++static __u32 yaffs_GetChunkGroupBase(yaffs_Device *dev, yaffs_Tnode *tn,
++		unsigned pos);
++static yaffs_Tnode *yaffs_FindLevel0Tnode(yaffs_Device *dev,
++					yaffs_FileStructure *fStruct,
++					__u32 chunkId);
+ 
+ 
+ /* Function to calculate chunk and offset */
+ 
+-static void yaffs_AddrToChunk(yaffs_Device *dev, loff_t addr, __u32 *chunk, __u32 *offset)
++static void yaffs_AddrToChunk(yaffs_Device *dev, loff_t addr, int *chunkOut,
++		__u32 *offsetOut)
+ {
+-	if(dev->chunkShift){
+-		/* Easy-peasy power of 2 case */
+-		*chunk  = (__u32)(addr >> dev->chunkShift);
+-		*offset = (__u32)(addr & dev->chunkMask);
+-	}
+-	else if(dev->crumbsPerChunk)
+-	{
+-		/* Case where we're using "crumbs" */
+-		*offset = (__u32)(addr & dev->crumbMask);
+-		addr >>= dev->crumbShift;
+-		*chunk = ((__u32)addr)/dev->crumbsPerChunk;
+-		*offset += ((addr - (*chunk * dev->crumbsPerChunk)) << dev->crumbShift);
++	int chunk;
++	__u32 offset;
++
++	chunk  = (__u32)(addr >> dev->chunkShift);
++
++	if (dev->chunkDiv == 1) {
++		/* easy power of 2 case */
++		offset = (__u32)(addr & dev->chunkMask);
++	} else {
++		/* Non power-of-2 case */
++
++		loff_t chunkBase;
++
++		chunk /= dev->chunkDiv;
++
++		chunkBase = ((loff_t)chunk) * dev->nDataBytesPerChunk;
++		offset = (__u32)(addr - chunkBase);
+ 	}
+-	else
+-		YBUG();
++
++	*chunkOut = chunk;
++	*offsetOut = offset;
+ }
+ 
+-/* Function to return the number of shifts for a power of 2 greater than or equal
+- * to the given number
++/* Function to return the number of shifts for a power of 2 greater than or
++ * equal to the given number
+  * Note we don't try to cater for all possible numbers and this does not have to
+  * be hellishly efficient.
+  */
+@@ -153,13 +154,14 @@ static __u32 ShiftsGE(__u32 x)
+ 
+ 	nShifts = extraBits = 0;
+ 
+-	while(x>1){
+-		if(x & 1) extraBits++;
+-		x>>=1;
++	while (x > 1) {
++		if (x & 1)
++			extraBits++;
++		x >>= 1;
+ 		nShifts++;
+ 	}
+ 
+-	if(extraBits)
++	if (extraBits)
+ 		nShifts++;
+ 
+ 	return nShifts;
+@@ -168,16 +170,17 @@ static __u32 ShiftsGE(__u32 x)
+ /* Function to return the number of shifts to get a 1 in bit 0
+  */
+ 
+-static __u32 ShiftDiv(__u32 x)
++static __u32 Shifts(__u32 x)
+ {
+ 	int nShifts;
+ 
+ 	nShifts =  0;
+ 
+-	if(!x) return 0;
++	if (!x)
++		return 0;
+ 
+-	while( !(x&1)){
+-		x>>=1;
++	while (!(x&1)) {
++		x >>= 1;
+ 		nShifts++;
+ 	}
+ 
+@@ -195,21 +198,25 @@ static int yaffs_InitialiseTempBuffers(y
+ 	int i;
+ 	__u8 *buf = (__u8 *)1;
+ 
+-	memset(dev->tempBuffer,0,sizeof(dev->tempBuffer));
++	memset(dev->tempBuffer, 0, sizeof(dev->tempBuffer));
+ 
+ 	for (i = 0; buf && i < YAFFS_N_TEMP_BUFFERS; i++) {
+ 		dev->tempBuffer[i].line = 0;	/* not in use */
+ 		dev->tempBuffer[i].buffer = buf =
+-		    YMALLOC_DMA(dev->nDataBytesPerChunk);
++		    YMALLOC_DMA(dev->totalBytesPerChunk);
+ 	}
+ 
+ 	return buf ? YAFFS_OK : YAFFS_FAIL;
+-
+ }
+ 
+-static __u8 *yaffs_GetTempBuffer(yaffs_Device * dev, int lineNo)
++__u8 *yaffs_GetTempBuffer(yaffs_Device *dev, int lineNo)
+ {
+ 	int i, j;
++
++	dev->tempInUse++;
++	if (dev->tempInUse > dev->maxTemp)
++		dev->maxTemp = dev->tempInUse;
++
+ 	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
+ 		if (dev->tempBuffer[i].line == 0) {
+ 			dev->tempBuffer[i].line = lineNo;
+@@ -227,9 +234,9 @@ static __u8 *yaffs_GetTempBuffer(yaffs_D
+ 	T(YAFFS_TRACE_BUFFERS,
+ 	  (TSTR("Out of temp buffers at line %d, other held by lines:"),
+ 	   lineNo));
+-	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
++	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++)
+ 		T(YAFFS_TRACE_BUFFERS, (TSTR(" %d "), dev->tempBuffer[i].line));
+-	}
++
+ 	T(YAFFS_TRACE_BUFFERS, (TSTR(" " TENDSTR)));
+ 
+ 	/*
+@@ -242,10 +249,13 @@ static __u8 *yaffs_GetTempBuffer(yaffs_D
+ 
+ }
+ 
+-static void yaffs_ReleaseTempBuffer(yaffs_Device * dev, __u8 * buffer,
++void yaffs_ReleaseTempBuffer(yaffs_Device *dev, __u8 *buffer,
+ 				    int lineNo)
+ {
+ 	int i;
++
++	dev->tempInUse--;
++
+ 	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
+ 		if (dev->tempBuffer[i].buffer == buffer) {
+ 			dev->tempBuffer[i].line = 0;
+@@ -267,27 +277,26 @@ static void yaffs_ReleaseTempBuffer(yaff
+ /*
+  * Determine if we have a managed buffer.
+  */
+-int yaffs_IsManagedTempBuffer(yaffs_Device * dev, const __u8 * buffer)
++int yaffs_IsManagedTempBuffer(yaffs_Device *dev, const __u8 *buffer)
+ {
+ 	int i;
++
+ 	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
+ 		if (dev->tempBuffer[i].buffer == buffer)
+ 			return 1;
++	}
+ 
++	for (i = 0; i < dev->nShortOpCaches; i++) {
++		if (dev->srCache[i].data == buffer)
++			return 1;
+ 	}
+ 
+-    for (i = 0; i < dev->nShortOpCaches; i++) {
+-        if( dev->srCache[i].data == buffer )
+-            return 1;
+-
+-    }
+-
+-    if (buffer == dev->checkpointBuffer)
+-      return 1;
+-
+-    T(YAFFS_TRACE_ALWAYS,
+-	  (TSTR("yaffs: unmaged buffer detected.\n" TENDSTR)));
+-    return 0;
++	if (buffer == dev->checkpointBuffer)
++		return 1;
++
++	T(YAFFS_TRACE_ALWAYS,
++		(TSTR("yaffs: unmaged buffer detected.\n" TENDSTR)));
++	return 0;
+ }
+ 
+ 
+@@ -296,62 +305,63 @@ int yaffs_IsManagedTempBuffer(yaffs_Devi
+  * Chunk bitmap manipulations
+  */
+ 
+-static Y_INLINE __u8 *yaffs_BlockBits(yaffs_Device * dev, int blk)
++static Y_INLINE __u8 *yaffs_BlockBits(yaffs_Device *dev, int blk)
+ {
+ 	if (blk < dev->internalStartBlock || blk > dev->internalEndBlock) {
+ 		T(YAFFS_TRACE_ERROR,
+-		  (TSTR("**>> yaffs: BlockBits block %d is not valid" TENDSTR),
+-		   blk));
++			(TSTR("**>> yaffs: BlockBits block %d is not valid" TENDSTR),
++			blk));
+ 		YBUG();
+ 	}
+ 	return dev->chunkBits +
+-	    (dev->chunkBitmapStride * (blk - dev->internalStartBlock));
++		(dev->chunkBitmapStride * (blk - dev->internalStartBlock));
+ }
+ 
+ static Y_INLINE void yaffs_VerifyChunkBitId(yaffs_Device *dev, int blk, int chunk)
+ {
+-	if(blk < dev->internalStartBlock || blk > dev->internalEndBlock ||
+-	   chunk < 0 || chunk >= dev->nChunksPerBlock) {
+-	   T(YAFFS_TRACE_ERROR,
+-	    (TSTR("**>> yaffs: Chunk Id (%d:%d) invalid"TENDSTR),blk,chunk));
+-	    YBUG();
++	if (blk < dev->internalStartBlock || blk > dev->internalEndBlock ||
++			chunk < 0 || chunk >= dev->nChunksPerBlock) {
++		T(YAFFS_TRACE_ERROR,
++		(TSTR("**>> yaffs: Chunk Id (%d:%d) invalid"TENDSTR),
++			blk, chunk));
++		YBUG();
+ 	}
+ }
+ 
+-static Y_INLINE void yaffs_ClearChunkBits(yaffs_Device * dev, int blk)
++static Y_INLINE void yaffs_ClearChunkBits(yaffs_Device *dev, int blk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+ 
+ 	memset(blkBits, 0, dev->chunkBitmapStride);
+ }
+ 
+-static Y_INLINE void yaffs_ClearChunkBit(yaffs_Device * dev, int blk, int chunk)
++static Y_INLINE void yaffs_ClearChunkBit(yaffs_Device *dev, int blk, int chunk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+ 
+-	yaffs_VerifyChunkBitId(dev,blk,chunk);
++	yaffs_VerifyChunkBitId(dev, blk, chunk);
+ 
+ 	blkBits[chunk / 8] &= ~(1 << (chunk & 7));
+ }
+ 
+-static Y_INLINE void yaffs_SetChunkBit(yaffs_Device * dev, int blk, int chunk)
++static Y_INLINE void yaffs_SetChunkBit(yaffs_Device *dev, int blk, int chunk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+ 
+-	yaffs_VerifyChunkBitId(dev,blk,chunk);
++	yaffs_VerifyChunkBitId(dev, blk, chunk);
+ 
+ 	blkBits[chunk / 8] |= (1 << (chunk & 7));
+ }
+ 
+-static Y_INLINE int yaffs_CheckChunkBit(yaffs_Device * dev, int blk, int chunk)
++static Y_INLINE int yaffs_CheckChunkBit(yaffs_Device *dev, int blk, int chunk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+-	yaffs_VerifyChunkBitId(dev,blk,chunk);
++	yaffs_VerifyChunkBitId(dev, blk, chunk);
+ 
+ 	return (blkBits[chunk / 8] & (1 << (chunk & 7))) ? 1 : 0;
+ }
+ 
+-static Y_INLINE int yaffs_StillSomeChunkBits(yaffs_Device * dev, int blk)
++static Y_INLINE int yaffs_StillSomeChunkBits(yaffs_Device *dev, int blk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+ 	int i;
+@@ -363,17 +373,17 @@ static Y_INLINE int yaffs_StillSomeChunk
+ 	return 0;
+ }
+ 
+-static int yaffs_CountChunkBits(yaffs_Device * dev, int blk)
++static int yaffs_CountChunkBits(yaffs_Device *dev, int blk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+ 	int i;
+ 	int n = 0;
+ 	for (i = 0; i < dev->chunkBitmapStride; i++) {
+ 		__u8 x = *blkBits;
+-		while(x){
+-			if(x & 1)
++		while (x) {
++			if (x & 1)
+ 				n++;
+-			x >>=1;
++			x >>= 1;
+ 		}
+ 
+ 		blkBits++;
+@@ -400,7 +410,7 @@ static int yaffs_SkipNANDVerification(ya
+ 	return !(yaffs_traceMask & (YAFFS_TRACE_VERIFY_NAND));
+ }
+ 
+-static const char * blockStateName[] = {
++static const char *blockStateName[] = {
+ "Unknown",
+ "Needs scanning",
+ "Scanning",
+@@ -413,64 +423,65 @@ static const char * blockStateName[] = {
+ "Dead"
+ };
+ 
+-static void yaffs_VerifyBlock(yaffs_Device *dev,yaffs_BlockInfo *bi,int n)
++static void yaffs_VerifyBlock(yaffs_Device *dev, yaffs_BlockInfo *bi, int n)
+ {
+ 	int actuallyUsed;
+ 	int inUse;
+ 
+-	if(yaffs_SkipVerification(dev))
++	if (yaffs_SkipVerification(dev))
+ 		return;
+ 
+ 	/* Report illegal runtime states */
+-	if(bi->blockState <0 || bi->blockState >= YAFFS_NUMBER_OF_BLOCK_STATES)
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has undefined state %d"TENDSTR),n,bi->blockState));
++	if (bi->blockState >= YAFFS_NUMBER_OF_BLOCK_STATES)
++		T(YAFFS_TRACE_VERIFY, (TSTR("Block %d has undefined state %d"TENDSTR), n, bi->blockState));
+ 
+-	switch(bi->blockState){
+-	 case YAFFS_BLOCK_STATE_UNKNOWN:
+-	 case YAFFS_BLOCK_STATE_SCANNING:
+-	 case YAFFS_BLOCK_STATE_NEEDS_SCANNING:
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has bad run-state %s"TENDSTR),
+-		n,blockStateName[bi->blockState]));
++	switch (bi->blockState) {
++	case YAFFS_BLOCK_STATE_UNKNOWN:
++	case YAFFS_BLOCK_STATE_SCANNING:
++	case YAFFS_BLOCK_STATE_NEEDS_SCANNING:
++		T(YAFFS_TRACE_VERIFY, (TSTR("Block %d has bad run-state %s"TENDSTR),
++		n, blockStateName[bi->blockState]));
+ 	}
+ 
+ 	/* Check pages in use and soft deletions are legal */
+ 
+ 	actuallyUsed = bi->pagesInUse - bi->softDeletions;
+ 
+-	if(bi->pagesInUse < 0 || bi->pagesInUse > dev->nChunksPerBlock ||
++	if (bi->pagesInUse < 0 || bi->pagesInUse > dev->nChunksPerBlock ||
+ 	   bi->softDeletions < 0 || bi->softDeletions > dev->nChunksPerBlock ||
+ 	   actuallyUsed < 0 || actuallyUsed > dev->nChunksPerBlock)
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has illegal values pagesInUsed %d softDeletions %d"TENDSTR),
+-		n,bi->pagesInUse,bi->softDeletions));
++		T(YAFFS_TRACE_VERIFY, (TSTR("Block %d has illegal values pagesInUsed %d softDeletions %d"TENDSTR),
++		n, bi->pagesInUse, bi->softDeletions));
+ 
+ 
+ 	/* Check chunk bitmap legal */
+-	inUse = yaffs_CountChunkBits(dev,n);
+-	if(inUse != bi->pagesInUse)
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has inconsistent values pagesInUse %d counted chunk bits %d"TENDSTR),
+-			n,bi->pagesInUse,inUse));
++	inUse = yaffs_CountChunkBits(dev, n);
++	if (inUse != bi->pagesInUse)
++		T(YAFFS_TRACE_VERIFY, (TSTR("Block %d has inconsistent values pagesInUse %d counted chunk bits %d"TENDSTR),
++			n, bi->pagesInUse, inUse));
+ 
+ 	/* Check that the sequence number is valid.
+ 	 * Ten million is legal, but is very unlikely
+ 	 */
+-	if(dev->isYaffs2 &&
++	if (dev->isYaffs2 &&
+ 	   (bi->blockState == YAFFS_BLOCK_STATE_ALLOCATING || bi->blockState == YAFFS_BLOCK_STATE_FULL) &&
+-	   (bi->sequenceNumber < YAFFS_LOWEST_SEQUENCE_NUMBER || bi->sequenceNumber > 10000000 ))
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has suspect sequence number of %d"TENDSTR),
+-		n,bi->sequenceNumber));
+-
++	   (bi->sequenceNumber < YAFFS_LOWEST_SEQUENCE_NUMBER || bi->sequenceNumber > 10000000))
++		T(YAFFS_TRACE_VERIFY, (TSTR("Block %d has suspect sequence number of %d"TENDSTR),
++		n, bi->sequenceNumber));
+ }
+ 
+-static void yaffs_VerifyCollectedBlock(yaffs_Device *dev,yaffs_BlockInfo *bi,int n)
++static void yaffs_VerifyCollectedBlock(yaffs_Device *dev, yaffs_BlockInfo *bi,
++		int n)
+ {
+-	yaffs_VerifyBlock(dev,bi,n);
++	yaffs_VerifyBlock(dev, bi, n);
+ 
+ 	/* After collection the block should be in the erased state */
+-	/* TODO: This will need to change if we do partial gc */
++	/* This will need to change if we do partial gc */
+ 
+-	if(bi->blockState != YAFFS_BLOCK_STATE_EMPTY){
+-		T(YAFFS_TRACE_ERROR,(TSTR("Block %d is in state %d after gc, should be erased"TENDSTR),
+-			n,bi->blockState));
++	if (bi->blockState != YAFFS_BLOCK_STATE_COLLECTING &&
++			bi->blockState != YAFFS_BLOCK_STATE_EMPTY) {
++		T(YAFFS_TRACE_ERROR, (TSTR("Block %d is in state %d after gc, should be erased"TENDSTR),
++			n, bi->blockState));
+ 	}
+ }
+ 
+@@ -480,52 +491,49 @@ static void yaffs_VerifyBlocks(yaffs_Dev
+ 	int nBlocksPerState[YAFFS_NUMBER_OF_BLOCK_STATES];
+ 	int nIllegalBlockStates = 0;
+ 
+-
+-	if(yaffs_SkipVerification(dev))
++	if (yaffs_SkipVerification(dev))
+ 		return;
+ 
+-	memset(nBlocksPerState,0,sizeof(nBlocksPerState));
+-
++	memset(nBlocksPerState, 0, sizeof(nBlocksPerState));
+ 
+-	for(i = dev->internalStartBlock; i <= dev->internalEndBlock; i++){
+-		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,i);
+-		yaffs_VerifyBlock(dev,bi,i);
++	for (i = dev->internalStartBlock; i <= dev->internalEndBlock; i++) {
++		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, i);
++		yaffs_VerifyBlock(dev, bi, i);
+ 
+-		if(bi->blockState >=0 && bi->blockState < YAFFS_NUMBER_OF_BLOCK_STATES)
++		if (bi->blockState < YAFFS_NUMBER_OF_BLOCK_STATES)
+ 			nBlocksPerState[bi->blockState]++;
+ 		else
+ 			nIllegalBlockStates++;
+-
+ 	}
+ 
+-	T(YAFFS_TRACE_VERIFY,(TSTR(""TENDSTR)));
+-	T(YAFFS_TRACE_VERIFY,(TSTR("Block summary"TENDSTR)));
++	T(YAFFS_TRACE_VERIFY, (TSTR(""TENDSTR)));
++	T(YAFFS_TRACE_VERIFY, (TSTR("Block summary"TENDSTR)));
+ 
+-	T(YAFFS_TRACE_VERIFY,(TSTR("%d blocks have illegal states"TENDSTR),nIllegalBlockStates));
+-	if(nBlocksPerState[YAFFS_BLOCK_STATE_ALLOCATING] > 1)
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Too many allocating blocks"TENDSTR)));
++	T(YAFFS_TRACE_VERIFY, (TSTR("%d blocks have illegal states"TENDSTR), nIllegalBlockStates));
++	if (nBlocksPerState[YAFFS_BLOCK_STATE_ALLOCATING] > 1)
++		T(YAFFS_TRACE_VERIFY, (TSTR("Too many allocating blocks"TENDSTR)));
+ 
+-	for(i = 0; i < YAFFS_NUMBER_OF_BLOCK_STATES; i++)
++	for (i = 0; i < YAFFS_NUMBER_OF_BLOCK_STATES; i++)
+ 		T(YAFFS_TRACE_VERIFY,
+ 		  (TSTR("%s %d blocks"TENDSTR),
+-		  blockStateName[i],nBlocksPerState[i]));
++		  blockStateName[i], nBlocksPerState[i]));
+ 
+-	if(dev->blocksInCheckpoint != nBlocksPerState[YAFFS_BLOCK_STATE_CHECKPOINT])
++	if (dev->blocksInCheckpoint != nBlocksPerState[YAFFS_BLOCK_STATE_CHECKPOINT])
+ 		T(YAFFS_TRACE_VERIFY,
+ 		 (TSTR("Checkpoint block count wrong dev %d count %d"TENDSTR),
+ 		 dev->blocksInCheckpoint, nBlocksPerState[YAFFS_BLOCK_STATE_CHECKPOINT]));
+ 
+-	if(dev->nErasedBlocks != nBlocksPerState[YAFFS_BLOCK_STATE_EMPTY])
++	if (dev->nErasedBlocks != nBlocksPerState[YAFFS_BLOCK_STATE_EMPTY])
+ 		T(YAFFS_TRACE_VERIFY,
+ 		 (TSTR("Erased block count wrong dev %d count %d"TENDSTR),
+ 		 dev->nErasedBlocks, nBlocksPerState[YAFFS_BLOCK_STATE_EMPTY]));
+ 
+-	if(nBlocksPerState[YAFFS_BLOCK_STATE_COLLECTING] > 1)
++	if (nBlocksPerState[YAFFS_BLOCK_STATE_COLLECTING] > 1)
+ 		T(YAFFS_TRACE_VERIFY,
+ 		 (TSTR("Too many collecting blocks %d (max is 1)"TENDSTR),
+ 		 nBlocksPerState[YAFFS_BLOCK_STATE_COLLECTING]));
+ 
+-	T(YAFFS_TRACE_VERIFY,(TSTR(""TENDSTR)));
++	T(YAFFS_TRACE_VERIFY, (TSTR(""TENDSTR)));
+ 
+ }
+ 
+@@ -535,26 +543,26 @@ static void yaffs_VerifyBlocks(yaffs_Dev
+  */
+ static void yaffs_VerifyObjectHeader(yaffs_Object *obj, yaffs_ObjectHeader *oh, yaffs_ExtendedTags *tags, int parentCheck)
+ {
+-	if(yaffs_SkipVerification(obj->myDev))
++	if (obj && yaffs_SkipVerification(obj->myDev))
+ 		return;
+ 
+-	if(!(tags && obj && oh)){
+-	 	T(YAFFS_TRACE_VERIFY,
+-		 		(TSTR("Verifying object header tags %x obj %x oh %x"TENDSTR),
+-		 		(__u32)tags,(__u32)obj,(__u32)oh));
++	if (!(tags && obj && oh)) {
++		T(YAFFS_TRACE_VERIFY,
++				(TSTR("Verifying object header tags %x obj %x oh %x"TENDSTR),
++				(__u32)tags, (__u32)obj, (__u32)oh));
+ 		return;
+ 	}
+ 
+-	if(oh->type <= YAFFS_OBJECT_TYPE_UNKNOWN ||
+-	   oh->type > YAFFS_OBJECT_TYPE_MAX)
+-	 	T(YAFFS_TRACE_VERIFY,
+-		 (TSTR("Obj %d header type is illegal value 0x%x"TENDSTR),
+-		 tags->objectId, oh->type));
+-
+-	if(tags->objectId != obj->objectId)
+-	 	T(YAFFS_TRACE_VERIFY,
+-		 (TSTR("Obj %d header mismatch objectId %d"TENDSTR),
+-		 tags->objectId, obj->objectId));
++	if (oh->type <= YAFFS_OBJECT_TYPE_UNKNOWN ||
++			oh->type > YAFFS_OBJECT_TYPE_MAX)
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d header type is illegal value 0x%x"TENDSTR),
++			tags->objectId, oh->type));
++
++	if (tags->objectId != obj->objectId)
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d header mismatch objectId %d"TENDSTR),
++			tags->objectId, obj->objectId));
+ 
+ 
+ 	/*
+@@ -563,46 +571,43 @@ static void yaffs_VerifyObjectHeader(yaf
+ 	 * Tests do not apply to the root object.
+ 	 */
+ 
+-	if(parentCheck && tags->objectId > 1 && !obj->parent)
+-	 	T(YAFFS_TRACE_VERIFY,
+-		 (TSTR("Obj %d header mismatch parentId %d obj->parent is NULL"TENDSTR),
+-	 	 tags->objectId, oh->parentObjectId));
+-
+-
+-	if(parentCheck && obj->parent &&
+-	   oh->parentObjectId != obj->parent->objectId &&
+-	   (oh->parentObjectId != YAFFS_OBJECTID_UNLINKED ||
+-	    obj->parent->objectId != YAFFS_OBJECTID_DELETED))
+-	 	T(YAFFS_TRACE_VERIFY,
+-		 (TSTR("Obj %d header mismatch parentId %d parentObjectId %d"TENDSTR),
+-	 	 tags->objectId, oh->parentObjectId, obj->parent->objectId));
++	if (parentCheck && tags->objectId > 1 && !obj->parent)
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d header mismatch parentId %d obj->parent is NULL"TENDSTR),
++			tags->objectId, oh->parentObjectId));
+ 
++	if (parentCheck && obj->parent &&
++			oh->parentObjectId != obj->parent->objectId &&
++			(oh->parentObjectId != YAFFS_OBJECTID_UNLINKED ||
++			obj->parent->objectId != YAFFS_OBJECTID_DELETED))
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d header mismatch parentId %d parentObjectId %d"TENDSTR),
++			tags->objectId, oh->parentObjectId, obj->parent->objectId));
+ 
+-	if(tags->objectId > 1 && oh->name[0] == 0) /* Null name */
++	if (tags->objectId > 1 && oh->name[0] == 0) /* Null name */
+ 		T(YAFFS_TRACE_VERIFY,
+-		(TSTR("Obj %d header name is NULL"TENDSTR),
+-		 obj->objectId));
++			(TSTR("Obj %d header name is NULL"TENDSTR),
++			obj->objectId));
+ 
+-	if(tags->objectId > 1 && ((__u8)(oh->name[0])) == 0xff) /* Trashed name */
++	if (tags->objectId > 1 && ((__u8)(oh->name[0])) == 0xff) /* Trashed name */
+ 		T(YAFFS_TRACE_VERIFY,
+-		(TSTR("Obj %d header name is 0xFF"TENDSTR),
+-		 obj->objectId));
++			(TSTR("Obj %d header name is 0xFF"TENDSTR),
++			obj->objectId));
+ }
+ 
+ 
+ 
+-static int yaffs_VerifyTnodeWorker(yaffs_Object * obj, yaffs_Tnode * tn,
+-				  	__u32 level, int chunkOffset)
++static int yaffs_VerifyTnodeWorker(yaffs_Object *obj, yaffs_Tnode *tn,
++					__u32 level, int chunkOffset)
+ {
+ 	int i;
+ 	yaffs_Device *dev = obj->myDev;
+ 	int ok = 1;
+-	int nTnodeBytes = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
+ 
+ 	if (tn) {
+ 		if (level > 0) {
+ 
+-			for (i = 0; i < YAFFS_NTNODES_INTERNAL && ok; i++){
++			for (i = 0; i < YAFFS_NTNODES_INTERNAL && ok; i++) {
+ 				if (tn->internal[i]) {
+ 					ok = yaffs_VerifyTnodeWorker(obj,
+ 							tn->internal[i],
+@@ -611,20 +616,19 @@ static int yaffs_VerifyTnodeWorker(yaffs
+ 				}
+ 			}
+ 		} else if (level == 0) {
+-			int i;
+ 			yaffs_ExtendedTags tags;
+ 			__u32 objectId = obj->objectId;
+ 
+ 			chunkOffset <<=  YAFFS_TNODES_LEVEL0_BITS;
+ 
+-			for(i = 0; i < YAFFS_NTNODES_LEVEL0; i++){
+-				__u32 theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
++			for (i = 0; i < YAFFS_NTNODES_LEVEL0; i++) {
++				__u32 theChunk = yaffs_GetChunkGroupBase(dev, tn, i);
+ 
+-				if(theChunk > 0){
++				if (theChunk > 0) {
+ 					/* T(~0,(TSTR("verifying (%d:%d) %d"TENDSTR),tags.objectId,tags.chunkId,theChunk)); */
+-					yaffs_ReadChunkWithTagsFromNAND(dev,theChunk,NULL, &tags);
+-					if(tags.objectId != objectId || tags.chunkId != chunkOffset){
+-						T(~0,(TSTR("Object %d chunkId %d NAND mismatch chunk %d tags (%d:%d)"TENDSTR),
++					yaffs_ReadChunkWithTagsFromNAND(dev, theChunk, NULL, &tags);
++					if (tags.objectId != objectId || tags.chunkId != chunkOffset) {
++						T(~0, (TSTR("Object %d chunkId %d NAND mismatch chunk %d tags (%d:%d)"TENDSTR),
+ 							objectId, chunkOffset, theChunk,
+ 							tags.objectId, tags.chunkId));
+ 					}
+@@ -646,13 +650,15 @@ static void yaffs_VerifyFile(yaffs_Objec
+ 	__u32 lastChunk;
+ 	__u32 x;
+ 	__u32 i;
+-	int ok;
+ 	yaffs_Device *dev;
+ 	yaffs_ExtendedTags tags;
+ 	yaffs_Tnode *tn;
+ 	__u32 objectId;
+ 
+-	if(obj && yaffs_SkipVerification(obj->myDev))
++	if (!obj)
++		return;
++
++	if (yaffs_SkipVerification(obj->myDev))
+ 		return;
+ 
+ 	dev = obj->myDev;
+@@ -662,17 +668,17 @@ static void yaffs_VerifyFile(yaffs_Objec
+ 	lastChunk =  obj->variant.fileVariant.fileSize / dev->nDataBytesPerChunk + 1;
+ 	x = lastChunk >> YAFFS_TNODES_LEVEL0_BITS;
+ 	requiredTallness = 0;
+-	while (x> 0) {
++	while (x > 0) {
+ 		x >>= YAFFS_TNODES_INTERNAL_BITS;
+ 		requiredTallness++;
+ 	}
+ 
+ 	actualTallness = obj->variant.fileVariant.topLevel;
+ 
+-	if(requiredTallness > actualTallness )
++	if (requiredTallness > actualTallness)
+ 		T(YAFFS_TRACE_VERIFY,
+ 		(TSTR("Obj %d had tnode tallness %d, needs to be %d"TENDSTR),
+-		 obj->objectId,actualTallness, requiredTallness));
++		 obj->objectId, actualTallness, requiredTallness));
+ 
+ 
+ 	/* Check that the chunks in the tnode tree are all correct.
+@@ -680,39 +686,31 @@ static void yaffs_VerifyFile(yaffs_Objec
+ 	 * checking the tags for every chunk match.
+ 	 */
+ 
+-	if(yaffs_SkipNANDVerification(dev))
++	if (yaffs_SkipNANDVerification(dev))
+ 		return;
+ 
+-	for(i = 1; i <= lastChunk; i++){
+-		tn = yaffs_FindLevel0Tnode(dev, &obj->variant.fileVariant,i);
++	for (i = 1; i <= lastChunk; i++) {
++		tn = yaffs_FindLevel0Tnode(dev, &obj->variant.fileVariant, i);
+ 
+ 		if (tn) {
+-			__u32 theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
+-			if(theChunk > 0){
++			__u32 theChunk = yaffs_GetChunkGroupBase(dev, tn, i);
++			if (theChunk > 0) {
+ 				/* T(~0,(TSTR("verifying (%d:%d) %d"TENDSTR),objectId,i,theChunk)); */
+-				yaffs_ReadChunkWithTagsFromNAND(dev,theChunk,NULL, &tags);
+-				if(tags.objectId != objectId || tags.chunkId != i){
+-					T(~0,(TSTR("Object %d chunkId %d NAND mismatch chunk %d tags (%d:%d)"TENDSTR),
++				yaffs_ReadChunkWithTagsFromNAND(dev, theChunk, NULL, &tags);
++				if (tags.objectId != objectId || tags.chunkId != i) {
++					T(~0, (TSTR("Object %d chunkId %d NAND mismatch chunk %d tags (%d:%d)"TENDSTR),
+ 						objectId, i, theChunk,
+ 						tags.objectId, tags.chunkId));
+ 				}
+ 			}
+ 		}
+-
+ 	}
+-
+ }
+ 
+-static void yaffs_VerifyDirectory(yaffs_Object *obj)
+-{
+-	if(obj && yaffs_SkipVerification(obj->myDev))
+-		return;
+-
+-}
+ 
+ static void yaffs_VerifyHardLink(yaffs_Object *obj)
+ {
+-	if(obj && yaffs_SkipVerification(obj->myDev))
++	if (obj && yaffs_SkipVerification(obj->myDev))
+ 		return;
+ 
+ 	/* Verify sane equivalent object */
+@@ -720,7 +718,7 @@ static void yaffs_VerifyHardLink(yaffs_O
+ 
+ static void yaffs_VerifySymlink(yaffs_Object *obj)
+ {
+-	if(obj && yaffs_SkipVerification(obj->myDev))
++	if (obj && yaffs_SkipVerification(obj->myDev))
+ 		return;
+ 
+ 	/* Verify symlink string */
+@@ -728,7 +726,7 @@ static void yaffs_VerifySymlink(yaffs_Ob
+ 
+ static void yaffs_VerifySpecial(yaffs_Object *obj)
+ {
+-	if(obj && yaffs_SkipVerification(obj->myDev))
++	if (obj && yaffs_SkipVerification(obj->myDev))
+ 		return;
+ }
+ 
+@@ -740,14 +738,19 @@ static void yaffs_VerifyObject(yaffs_Obj
+ 	__u32 chunkMax;
+ 
+ 	__u32 chunkIdOk;
+-	__u32 chunkIsLive;
++	__u32 chunkInRange;
++	__u32 chunkShouldNotBeDeleted;
++	__u32 chunkValid;
++
++	if (!obj)
++		return;
+ 
+-	if(!obj)
++	if (obj->beingCreated)
+ 		return;
+ 
+ 	dev = obj->myDev;
+ 
+-	if(yaffs_SkipVerification(dev))
++	if (yaffs_SkipVerification(dev))
+ 		return;
+ 
+ 	/* Check sane object header chunk */
+@@ -755,50 +758,54 @@ static void yaffs_VerifyObject(yaffs_Obj
+ 	chunkMin = dev->internalStartBlock * dev->nChunksPerBlock;
+ 	chunkMax = (dev->internalEndBlock+1) * dev->nChunksPerBlock - 1;
+ 
+-	chunkIdOk = (obj->chunkId >= chunkMin && obj->chunkId <= chunkMax);
+-	chunkIsLive = chunkIdOk &&
++	chunkInRange = (((unsigned)(obj->hdrChunk)) >= chunkMin && ((unsigned)(obj->hdrChunk)) <= chunkMax);
++	chunkIdOk = chunkInRange || obj->hdrChunk == 0;
++	chunkValid = chunkInRange &&
+ 			yaffs_CheckChunkBit(dev,
+-					    obj->chunkId / dev->nChunksPerBlock,
+-					    obj->chunkId % dev->nChunksPerBlock);
+-	if(!obj->fake &&
+-	    (!chunkIdOk || !chunkIsLive)) {
+-	   T(YAFFS_TRACE_VERIFY,
+-	   (TSTR("Obj %d has chunkId %d %s %s"TENDSTR),
+-	   obj->objectId,obj->chunkId,
+-	   chunkIdOk ? "" : ",out of range",
+-	   chunkIsLive || !chunkIdOk ? "" : ",marked as deleted"));
++					obj->hdrChunk / dev->nChunksPerBlock,
++					obj->hdrChunk % dev->nChunksPerBlock);
++	chunkShouldNotBeDeleted = chunkInRange && !chunkValid;
++
++	if (!obj->fake &&
++			(!chunkIdOk || chunkShouldNotBeDeleted)) {
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d has chunkId %d %s %s"TENDSTR),
++			obj->objectId, obj->hdrChunk,
++			chunkIdOk ? "" : ",out of range",
++			chunkShouldNotBeDeleted ? ",marked as deleted" : ""));
+ 	}
+ 
+-	if(chunkIdOk && chunkIsLive &&!yaffs_SkipNANDVerification(dev)) {
++	if (chunkValid && !yaffs_SkipNANDVerification(dev)) {
+ 		yaffs_ExtendedTags tags;
+ 		yaffs_ObjectHeader *oh;
+-		__u8 *buffer = yaffs_GetTempBuffer(dev,__LINE__);
++		__u8 *buffer = yaffs_GetTempBuffer(dev, __LINE__);
+ 
+ 		oh = (yaffs_ObjectHeader *)buffer;
+ 
+-		yaffs_ReadChunkWithTagsFromNAND(dev, obj->chunkId,buffer, &tags);
++		yaffs_ReadChunkWithTagsFromNAND(dev, obj->hdrChunk, buffer,
++				&tags);
+ 
+-		yaffs_VerifyObjectHeader(obj,oh,&tags,1);
++		yaffs_VerifyObjectHeader(obj, oh, &tags, 1);
+ 
+-		yaffs_ReleaseTempBuffer(dev,buffer,__LINE__);
++		yaffs_ReleaseTempBuffer(dev, buffer, __LINE__);
+ 	}
+ 
+ 	/* Verify it has a parent */
+-	if(obj && !obj->fake &&
+-	   (!obj->parent || obj->parent->myDev != dev)){
+-	   T(YAFFS_TRACE_VERIFY,
+-	   (TSTR("Obj %d has parent pointer %p which does not look like an object"TENDSTR),
+-	   obj->objectId,obj->parent));
++	if (obj && !obj->fake &&
++			(!obj->parent || obj->parent->myDev != dev)) {
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d has parent pointer %p which does not look like an object"TENDSTR),
++			obj->objectId, obj->parent));
+ 	}
+ 
+ 	/* Verify parent is a directory */
+-	if(obj->parent && obj->parent->variantType != YAFFS_OBJECT_TYPE_DIRECTORY){
+-	   T(YAFFS_TRACE_VERIFY,
+-	   (TSTR("Obj %d's parent is not a directory (type %d)"TENDSTR),
+-	   obj->objectId,obj->parent->variantType));
++	if (obj->parent && obj->parent->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d's parent is not a directory (type %d)"TENDSTR),
++			obj->objectId, obj->parent->variantType));
+ 	}
+ 
+-	switch(obj->variantType){
++	switch (obj->variantType) {
+ 	case YAFFS_OBJECT_TYPE_FILE:
+ 		yaffs_VerifyFile(obj);
+ 		break;
+@@ -818,33 +825,30 @@ static void yaffs_VerifyObject(yaffs_Obj
+ 	default:
+ 		T(YAFFS_TRACE_VERIFY,
+ 		(TSTR("Obj %d has illegaltype %d"TENDSTR),
+-		obj->objectId,obj->variantType));
++		obj->objectId, obj->variantType));
+ 		break;
+ 	}
+-
+-
+ }
+ 
+ static void yaffs_VerifyObjects(yaffs_Device *dev)
+ {
+ 	yaffs_Object *obj;
+ 	int i;
+-	struct list_head *lh;
++	struct ylist_head *lh;
+ 
+-	if(yaffs_SkipVerification(dev))
++	if (yaffs_SkipVerification(dev))
+ 		return;
+ 
+ 	/* Iterate through the objects in each hash entry */
+ 
+-	 for(i = 0; i <  YAFFS_NOBJECT_BUCKETS; i++){
+-	 	list_for_each(lh, &dev->objectBucket[i].list) {
++	for (i = 0; i <  YAFFS_NOBJECT_BUCKETS; i++) {
++		ylist_for_each(lh, &dev->objectBucket[i].list) {
+ 			if (lh) {
+-				obj = list_entry(lh, yaffs_Object, hashLink);
++				obj = ylist_entry(lh, yaffs_Object, hashLink);
+ 				yaffs_VerifyObject(obj);
+ 			}
+ 		}
+-	 }
+-
++	}
+ }
+ 
+ 
+@@ -855,19 +859,20 @@ static void yaffs_VerifyObjects(yaffs_De
+ static Y_INLINE int yaffs_HashFunction(int n)
+ {
+ 	n = abs(n);
+-	return (n % YAFFS_NOBJECT_BUCKETS);
++	return n % YAFFS_NOBJECT_BUCKETS;
+ }
+ 
+ /*
+- * Access functions to useful fake objects
++ * Access functions to useful fake objects.
++ * Note that root might have a presence in NAND if permissions are set.
+  */
+ 
+-yaffs_Object *yaffs_Root(yaffs_Device * dev)
++yaffs_Object *yaffs_Root(yaffs_Device *dev)
+ {
+ 	return dev->rootDir;
+ }
+ 
+-yaffs_Object *yaffs_LostNFound(yaffs_Device * dev)
++yaffs_Object *yaffs_LostNFound(yaffs_Device *dev)
+ {
+ 	return dev->lostNFoundDir;
+ }
+@@ -877,7 +882,7 @@ yaffs_Object *yaffs_LostNFound(yaffs_Dev
+  *  Erased NAND checking functions
+  */
+ 
+-int yaffs_CheckFF(__u8 * buffer, int nBytes)
++int yaffs_CheckFF(__u8 *buffer, int nBytes)
+ {
+ 	/* Horrible, slow implementation */
+ 	while (nBytes--) {
+@@ -889,9 +894,8 @@ int yaffs_CheckFF(__u8 * buffer, int nBy
+ }
+ 
+ static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev,
+-				  int chunkInNAND)
++				int chunkInNAND)
+ {
+-
+ 	int retval = YAFFS_OK;
+ 	__u8 *data = yaffs_GetTempBuffer(dev, __LINE__);
+ 	yaffs_ExtendedTags tags;
+@@ -899,10 +903,9 @@ static int yaffs_CheckChunkErased(struct
+ 
+ 	result = yaffs_ReadChunkWithTagsFromNAND(dev, chunkInNAND, data, &tags);
+ 
+-	if(tags.eccResult > YAFFS_ECC_RESULT_NO_ERROR)
++	if (tags.eccResult > YAFFS_ECC_RESULT_NO_ERROR)
+ 		retval = YAFFS_FAIL;
+ 
+-
+ 	if (!yaffs_CheckFF(data, dev->nDataBytesPerChunk) || tags.chunkUsed) {
+ 		T(YAFFS_TRACE_NANDACCESS,
+ 		  (TSTR("Chunk %d not erased" TENDSTR), chunkInNAND));
+@@ -915,11 +918,10 @@ static int yaffs_CheckChunkErased(struct
+ 
+ }
+ 
+-
+ static int yaffs_WriteNewChunkWithTagsToNAND(struct yaffs_DeviceStruct *dev,
+-					     const __u8 * data,
+-					     yaffs_ExtendedTags * tags,
+-					     int useReserve)
++					const __u8 *data,
++					yaffs_ExtendedTags *tags,
++					int useReserve)
+ {
+ 	int attempts = 0;
+ 	int writeOk = 0;
+@@ -972,7 +974,7 @@ static int yaffs_WriteNewChunkWithTagsTo
+ 			erasedOk = yaffs_CheckChunkErased(dev, chunk);
+ 			if (erasedOk != YAFFS_OK) {
+ 				T(YAFFS_TRACE_ERROR,
+-				(TSTR ("**>> yaffs chunk %d was not erased"
++				(TSTR("**>> yaffs chunk %d was not erased"
+ 				TENDSTR), chunk));
+ 
+ 				/* try another chunk */
+@@ -992,7 +994,11 @@ static int yaffs_WriteNewChunkWithTagsTo
+ 		/* Copy the data into the robustification buffer */
+ 		yaffs_HandleWriteChunkOk(dev, chunk, data, tags);
+ 
+-	} while (writeOk != YAFFS_OK && attempts < yaffs_wr_attempts);
++	} while (writeOk != YAFFS_OK &&
++		(yaffs_wr_attempts <= 0 || attempts <= yaffs_wr_attempts));
++
++	if (!writeOk)
++		chunk = -1;
+ 
+ 	if (attempts > 1) {
+ 		T(YAFFS_TRACE_ERROR,
+@@ -1009,13 +1015,35 @@ static int yaffs_WriteNewChunkWithTagsTo
+  * Block retiring for handling a broken block.
+  */
+ 
+-static void yaffs_RetireBlock(yaffs_Device * dev, int blockInNAND)
++static void yaffs_RetireBlock(yaffs_Device *dev, int blockInNAND)
+ {
+ 	yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, blockInNAND);
+ 
+ 	yaffs_InvalidateCheckpoint(dev);
+ 
+-	yaffs_MarkBlockBad(dev, blockInNAND);
++	if (yaffs_MarkBlockBad(dev, blockInNAND) != YAFFS_OK) {
++		if (yaffs_EraseBlockInNAND(dev, blockInNAND) != YAFFS_OK) {
++			T(YAFFS_TRACE_ALWAYS, (TSTR(
++				"yaffs: Failed to mark bad and erase block %d"
++				TENDSTR), blockInNAND));
++		} else {
++			yaffs_ExtendedTags tags;
++			int chunkId = blockInNAND * dev->nChunksPerBlock;
++
++			__u8 *buffer = yaffs_GetTempBuffer(dev, __LINE__);
++
++			memset(buffer, 0xff, dev->nDataBytesPerChunk);
++			yaffs_InitialiseTags(&tags);
++			tags.sequenceNumber = YAFFS_SEQUENCE_BAD_BLOCK;
++			if (dev->writeChunkWithTagsToNAND(dev, chunkId -
++				dev->chunkOffset, buffer, &tags) != YAFFS_OK)
++				T(YAFFS_TRACE_ALWAYS, (TSTR("yaffs: Failed to "
++					TCONT("write bad block marker to block %d")
++					TENDSTR), blockInNAND));
++
++			yaffs_ReleaseTempBuffer(dev, buffer, __LINE__);
++		}
++	}
+ 
+ 	bi->blockState = YAFFS_BLOCK_STATE_DEAD;
+ 	bi->gcPrioritise = 0;
+@@ -1029,49 +1057,45 @@ static void yaffs_RetireBlock(yaffs_Devi
+  *
+  */
+ 
+-static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+-				     const __u8 * data,
+-				     const yaffs_ExtendedTags * tags)
++static void yaffs_HandleWriteChunkOk(yaffs_Device *dev, int chunkInNAND,
++				const __u8 *data,
++				const yaffs_ExtendedTags *tags)
+ {
+ }
+ 
+-static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+-				    const yaffs_ExtendedTags * tags)
++static void yaffs_HandleUpdateChunk(yaffs_Device *dev, int chunkInNAND,
++				const yaffs_ExtendedTags *tags)
+ {
+ }
+ 
+ void yaffs_HandleChunkError(yaffs_Device *dev, yaffs_BlockInfo *bi)
+ {
+-	if(!bi->gcPrioritise){
++	if (!bi->gcPrioritise) {
+ 		bi->gcPrioritise = 1;
+ 		dev->hasPendingPrioritisedGCs = 1;
+-		bi->chunkErrorStrikes ++;
++		bi->chunkErrorStrikes++;
+ 
+-		if(bi->chunkErrorStrikes > 3){
++		if (bi->chunkErrorStrikes > 3) {
+ 			bi->needsRetiring = 1; /* Too many stikes, so retire this */
+ 			T(YAFFS_TRACE_ALWAYS, (TSTR("yaffs: Block struck out" TENDSTR)));
+ 
+ 		}
+-
+ 	}
+ }
+ 
+-static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND, int erasedOk)
++static void yaffs_HandleWriteChunkError(yaffs_Device *dev, int chunkInNAND,
++		int erasedOk)
+ {
+-
+ 	int blockInNAND = chunkInNAND / dev->nChunksPerBlock;
+ 	yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, blockInNAND);
+ 
+-	yaffs_HandleChunkError(dev,bi);
++	yaffs_HandleChunkError(dev, bi);
+ 
+-
+-	if(erasedOk ) {
++	if (erasedOk) {
+ 		/* Was an actual write failure, so mark the block for retirement  */
+ 		bi->needsRetiring = 1;
+ 		T(YAFFS_TRACE_ERROR | YAFFS_TRACE_BAD_BLOCKS,
+ 		  (TSTR("**>> Block %d needs retiring" TENDSTR), blockInNAND));
+-
+-
+ 	}
+ 
+ 	/* Delete the chunk */
+@@ -1081,12 +1105,12 @@ static void yaffs_HandleWriteChunkError(
+ 
+ /*---------------- Name handling functions ------------*/
+ 
+-static __u16 yaffs_CalcNameSum(const YCHAR * name)
++static __u16 yaffs_CalcNameSum(const YCHAR *name)
+ {
+ 	__u16 sum = 0;
+ 	__u16 i = 1;
+ 
+-	YUCHAR *bname = (YUCHAR *) name;
++	const YUCHAR *bname = (const YUCHAR *) name;
+ 	if (bname) {
+ 		while ((*bname) && (i < (YAFFS_MAX_NAME_LENGTH/2))) {
+ 
+@@ -1102,14 +1126,14 @@ static __u16 yaffs_CalcNameSum(const YCH
+ 	return sum;
+ }
+ 
+-static void yaffs_SetObjectName(yaffs_Object * obj, const YCHAR * name)
++static void yaffs_SetObjectName(yaffs_Object *obj, const YCHAR *name)
+ {
+ #ifdef CONFIG_YAFFS_SHORT_NAMES_IN_RAM
+-	if (name && yaffs_strlen(name) <= YAFFS_SHORT_NAME_LENGTH) {
++	memset(obj->shortName, 0, sizeof(YCHAR) * (YAFFS_SHORT_NAME_LENGTH+1));
++	if (name && yaffs_strlen(name) <= YAFFS_SHORT_NAME_LENGTH)
+ 		yaffs_strcpy(obj->shortName, name);
+-	} else {
++	else
+ 		obj->shortName[0] = _Y('\0');
+-	}
+ #endif
+ 	obj->sum = yaffs_CalcNameSum(name);
+ }
+@@ -1126,7 +1150,7 @@ static void yaffs_SetObjectName(yaffs_Ob
+  * Don't use this function directly
+  */
+ 
+-static int yaffs_CreateTnodes(yaffs_Device * dev, int nTnodes)
++static int yaffs_CreateTnodes(yaffs_Device *dev, int nTnodes)
+ {
+ 	int i;
+ 	int tnodeSize;
+@@ -1143,6 +1167,9 @@ static int yaffs_CreateTnodes(yaffs_Devi
+ 	 * Must be a multiple of 32-bits  */
+ 	tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
+ 
++	if (tnodeSize < sizeof(yaffs_Tnode))
++		tnodeSize = sizeof(yaffs_Tnode);
++
+ 	/* make these things */
+ 
+ 	newTnodes = YMALLOC(nTnodes * tnodeSize);
+@@ -1150,7 +1177,7 @@ static int yaffs_CreateTnodes(yaffs_Devi
+ 
+ 	if (!newTnodes) {
+ 		T(YAFFS_TRACE_ERROR,
+-		  (TSTR("yaffs: Could not allocate Tnodes" TENDSTR)));
++			(TSTR("yaffs: Could not allocate Tnodes" TENDSTR)));
+ 		return YAFFS_FAIL;
+ 	}
+ 
+@@ -1170,7 +1197,7 @@ static int yaffs_CreateTnodes(yaffs_Devi
+ 	dev->freeTnodes = newTnodes;
+ #else
+ 	/* New hookup for wide tnodes */
+-	for(i = 0; i < nTnodes -1; i++) {
++	for (i = 0; i < nTnodes - 1; i++) {
+ 		curr = (yaffs_Tnode *) &mem[i * tnodeSize];
+ 		next = (yaffs_Tnode *) &mem[(i+1) * tnodeSize];
+ 		curr->internal[0] = next;
+@@ -1197,7 +1224,6 @@ static int yaffs_CreateTnodes(yaffs_Devi
+ 		  (TSTR
+ 		   ("yaffs: Could not add tnodes to management list" TENDSTR)));
+ 		   return YAFFS_FAIL;
+-
+ 	} else {
+ 		tnl->tnodes = newTnodes;
+ 		tnl->next = dev->allocatedTnodeList;
+@@ -1211,14 +1237,13 @@ static int yaffs_CreateTnodes(yaffs_Devi
+ 
+ /* GetTnode gets us a clean tnode. Tries to make allocate more if we run out */
+ 
+-static yaffs_Tnode *yaffs_GetTnodeRaw(yaffs_Device * dev)
++static yaffs_Tnode *yaffs_GetTnodeRaw(yaffs_Device *dev)
+ {
+ 	yaffs_Tnode *tn = NULL;
+ 
+ 	/* If there are none left make more */
+-	if (!dev->freeTnodes) {
++	if (!dev->freeTnodes)
+ 		yaffs_CreateTnodes(dev, YAFFS_ALLOCATION_NTNODES);
+-	}
+ 
+ 	if (dev->freeTnodes) {
+ 		tn = dev->freeTnodes;
+@@ -1233,21 +1258,27 @@ static yaffs_Tnode *yaffs_GetTnodeRaw(ya
+ 		dev->nFreeTnodes--;
+ 	}
+ 
++	dev->nCheckpointBlocksRequired = 0; /* force recalculation*/
++
+ 	return tn;
+ }
+ 
+-static yaffs_Tnode *yaffs_GetTnode(yaffs_Device * dev)
++static yaffs_Tnode *yaffs_GetTnode(yaffs_Device *dev)
+ {
+ 	yaffs_Tnode *tn = yaffs_GetTnodeRaw(dev);
++	int tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
+ 
+-	if(tn)
+-		memset(tn, 0, (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8);
++	if (tnodeSize < sizeof(yaffs_Tnode))
++		tnodeSize = sizeof(yaffs_Tnode);
++
++	if (tn)
++		memset(tn, 0, tnodeSize);
+ 
+ 	return tn;
+ }
+ 
+ /* FreeTnode frees up a tnode and puts it back on the free list */
+-static void yaffs_FreeTnode(yaffs_Device * dev, yaffs_Tnode * tn)
++static void yaffs_FreeTnode(yaffs_Device *dev, yaffs_Tnode *tn)
+ {
+ 	if (tn) {
+ #ifdef CONFIG_YAFFS_TNODE_LIST_DEBUG
+@@ -1262,9 +1293,10 @@ static void yaffs_FreeTnode(yaffs_Device
+ 		dev->freeTnodes = tn;
+ 		dev->nFreeTnodes++;
+ 	}
++	dev->nCheckpointBlocksRequired = 0; /* force recalculation*/
+ }
+ 
+-static void yaffs_DeinitialiseTnodes(yaffs_Device * dev)
++static void yaffs_DeinitialiseTnodes(yaffs_Device *dev)
+ {
+ 	/* Free the list of allocated tnodes */
+ 	yaffs_TnodeList *tmp;
+@@ -1282,71 +1314,72 @@ static void yaffs_DeinitialiseTnodes(yaf
+ 	dev->nFreeTnodes = 0;
+ }
+ 
+-static void yaffs_InitialiseTnodes(yaffs_Device * dev)
++static void yaffs_InitialiseTnodes(yaffs_Device *dev)
+ {
+ 	dev->allocatedTnodeList = NULL;
+ 	dev->freeTnodes = NULL;
+ 	dev->nFreeTnodes = 0;
+ 	dev->nTnodesCreated = 0;
+-
+ }
+ 
+ 
+-void yaffs_PutLevel0Tnode(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos, unsigned val)
++void yaffs_PutLevel0Tnode(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos,
++		unsigned val)
+ {
+-  __u32 *map = (__u32 *)tn;
+-  __u32 bitInMap;
+-  __u32 bitInWord;
+-  __u32 wordInMap;
+-  __u32 mask;
++	__u32 *map = (__u32 *)tn;
++	__u32 bitInMap;
++	__u32 bitInWord;
++	__u32 wordInMap;
++	__u32 mask;
+ 
+-  pos &= YAFFS_TNODES_LEVEL0_MASK;
+-  val >>= dev->chunkGroupBits;
++	pos &= YAFFS_TNODES_LEVEL0_MASK;
++	val >>= dev->chunkGroupBits;
+ 
+-  bitInMap = pos * dev->tnodeWidth;
+-  wordInMap = bitInMap /32;
+-  bitInWord = bitInMap & (32 -1);
++	bitInMap = pos * dev->tnodeWidth;
++	wordInMap = bitInMap / 32;
++	bitInWord = bitInMap & (32 - 1);
+ 
+-  mask = dev->tnodeMask << bitInWord;
++	mask = dev->tnodeMask << bitInWord;
+ 
+-  map[wordInMap] &= ~mask;
+-  map[wordInMap] |= (mask & (val << bitInWord));
++	map[wordInMap] &= ~mask;
++	map[wordInMap] |= (mask & (val << bitInWord));
+ 
+-  if(dev->tnodeWidth > (32-bitInWord)) {
+-    bitInWord = (32 - bitInWord);
+-    wordInMap++;;
+-    mask = dev->tnodeMask >> (/*dev->tnodeWidth -*/ bitInWord);
+-    map[wordInMap] &= ~mask;
+-    map[wordInMap] |= (mask & (val >> bitInWord));
+-  }
++	if (dev->tnodeWidth > (32 - bitInWord)) {
++		bitInWord = (32 - bitInWord);
++		wordInMap++;;
++		mask = dev->tnodeMask >> (/*dev->tnodeWidth -*/ bitInWord);
++		map[wordInMap] &= ~mask;
++		map[wordInMap] |= (mask & (val >> bitInWord));
++	}
+ }
+ 
+-static __u32 yaffs_GetChunkGroupBase(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos)
++static __u32 yaffs_GetChunkGroupBase(yaffs_Device *dev, yaffs_Tnode *tn,
++		unsigned pos)
+ {
+-  __u32 *map = (__u32 *)tn;
+-  __u32 bitInMap;
+-  __u32 bitInWord;
+-  __u32 wordInMap;
+-  __u32 val;
++	__u32 *map = (__u32 *)tn;
++	__u32 bitInMap;
++	__u32 bitInWord;
++	__u32 wordInMap;
++	__u32 val;
+ 
+-  pos &= YAFFS_TNODES_LEVEL0_MASK;
++	pos &= YAFFS_TNODES_LEVEL0_MASK;
+ 
+-  bitInMap = pos * dev->tnodeWidth;
+-  wordInMap = bitInMap /32;
+-  bitInWord = bitInMap & (32 -1);
++	bitInMap = pos * dev->tnodeWidth;
++	wordInMap = bitInMap / 32;
++	bitInWord = bitInMap & (32 - 1);
+ 
+-  val = map[wordInMap] >> bitInWord;
++	val = map[wordInMap] >> bitInWord;
+ 
+-  if(dev->tnodeWidth > (32-bitInWord)) {
+-    bitInWord = (32 - bitInWord);
+-    wordInMap++;;
+-    val |= (map[wordInMap] << bitInWord);
+-  }
++	if	(dev->tnodeWidth > (32 - bitInWord)) {
++		bitInWord = (32 - bitInWord);
++		wordInMap++;;
++		val |= (map[wordInMap] << bitInWord);
++	}
+ 
+-  val &= dev->tnodeMask;
+-  val <<= dev->chunkGroupBits;
++	val &= dev->tnodeMask;
++	val <<= dev->chunkGroupBits;
+ 
+-  return val;
++	return val;
+ }
+ 
+ /* ------------------- End of individual tnode manipulation -----------------*/
+@@ -1357,24 +1390,21 @@ static __u32 yaffs_GetChunkGroupBase(yaf
+  */
+ 
+ /* FindLevel0Tnode finds the level 0 tnode, if one exists. */
+-static yaffs_Tnode *yaffs_FindLevel0Tnode(yaffs_Device * dev,
+-					  yaffs_FileStructure * fStruct,
+-					  __u32 chunkId)
++static yaffs_Tnode *yaffs_FindLevel0Tnode(yaffs_Device *dev,
++					yaffs_FileStructure *fStruct,
++					__u32 chunkId)
+ {
+-
+ 	yaffs_Tnode *tn = fStruct->top;
+ 	__u32 i;
+ 	int requiredTallness;
+ 	int level = fStruct->topLevel;
+ 
+ 	/* Check sane level and chunk Id */
+-	if (level < 0 || level > YAFFS_TNODES_MAX_LEVEL) {
++	if (level < 0 || level > YAFFS_TNODES_MAX_LEVEL)
+ 		return NULL;
+-	}
+ 
+-	if (chunkId > YAFFS_MAX_CHUNK_ID) {
++	if (chunkId > YAFFS_MAX_CHUNK_ID)
+ 		return NULL;
+-	}
+ 
+ 	/* First check we're tall enough (ie enough topLevel) */
+ 
+@@ -1385,22 +1415,17 @@ static yaffs_Tnode *yaffs_FindLevel0Tnod
+ 		requiredTallness++;
+ 	}
+ 
+-	if (requiredTallness > fStruct->topLevel) {
+-		/* Not tall enough, so we can't find it, return NULL. */
+-		return NULL;
+-	}
++	if (requiredTallness > fStruct->topLevel)
++		return NULL; /* Not tall enough, so we can't find it */
+ 
+ 	/* Traverse down to level 0 */
+ 	while (level > 0 && tn) {
+-		tn = tn->
+-		    internal[(chunkId >>
+-			       ( YAFFS_TNODES_LEVEL0_BITS +
+-			         (level - 1) *
+-			         YAFFS_TNODES_INTERNAL_BITS)
+-			      ) &
+-			     YAFFS_TNODES_INTERNAL_MASK];
++		tn = tn->internal[(chunkId >>
++			(YAFFS_TNODES_LEVEL0_BITS +
++				(level - 1) *
++				YAFFS_TNODES_INTERNAL_BITS)) &
++			YAFFS_TNODES_INTERNAL_MASK];
+ 		level--;
+-
+ 	}
+ 
+ 	return tn;
+@@ -1417,12 +1442,11 @@ static yaffs_Tnode *yaffs_FindLevel0Tnod
+  *  be plugged into the ttree.
+  */
+ 
+-static yaffs_Tnode *yaffs_AddOrFindLevel0Tnode(yaffs_Device * dev,
+-					       yaffs_FileStructure * fStruct,
+-					       __u32 chunkId,
+-					       yaffs_Tnode *passedTn)
++static yaffs_Tnode *yaffs_AddOrFindLevel0Tnode(yaffs_Device *dev,
++					yaffs_FileStructure *fStruct,
++					__u32 chunkId,
++					yaffs_Tnode *passedTn)
+ {
+-
+ 	int requiredTallness;
+ 	int i;
+ 	int l;
+@@ -1432,13 +1456,11 @@ static yaffs_Tnode *yaffs_AddOrFindLevel
+ 
+ 
+ 	/* Check sane level and page Id */
+-	if (fStruct->topLevel < 0 || fStruct->topLevel > YAFFS_TNODES_MAX_LEVEL) {
++	if (fStruct->topLevel < 0 || fStruct->topLevel > YAFFS_TNODES_MAX_LEVEL)
+ 		return NULL;
+-	}
+ 
+-	if (chunkId > YAFFS_MAX_CHUNK_ID) {
++	if (chunkId > YAFFS_MAX_CHUNK_ID)
+ 		return NULL;
+-	}
+ 
+ 	/* First check we're tall enough (ie enough topLevel) */
+ 
+@@ -1451,7 +1473,7 @@ static yaffs_Tnode *yaffs_AddOrFindLevel
+ 
+ 
+ 	if (requiredTallness > fStruct->topLevel) {
+-		/* Not tall enough,gotta make the tree taller */
++		/* Not tall enough, gotta make the tree taller */
+ 		for (i = fStruct->topLevel; i < requiredTallness; i++) {
+ 
+ 			tn = yaffs_GetTnode(dev);
+@@ -1473,27 +1495,27 @@ static yaffs_Tnode *yaffs_AddOrFindLevel
+ 	l = fStruct->topLevel;
+ 	tn = fStruct->top;
+ 
+-	if(l > 0) {
++	if (l > 0) {
+ 		while (l > 0 && tn) {
+ 			x = (chunkId >>
+-			     ( YAFFS_TNODES_LEVEL0_BITS +
++			     (YAFFS_TNODES_LEVEL0_BITS +
+ 			      (l - 1) * YAFFS_TNODES_INTERNAL_BITS)) &
+ 			    YAFFS_TNODES_INTERNAL_MASK;
+ 
+ 
+-			if((l>1) && !tn->internal[x]){
++			if ((l > 1) && !tn->internal[x]) {
+ 				/* Add missing non-level-zero tnode */
+ 				tn->internal[x] = yaffs_GetTnode(dev);
+ 
+-			} else if(l == 1) {
++			} else if (l == 1) {
+ 				/* Looking from level 1 at level 0 */
+-			 	if (passedTn) {
++				if (passedTn) {
+ 					/* If we already have one, then release it.*/
+-					if(tn->internal[x])
+-						yaffs_FreeTnode(dev,tn->internal[x]);
++					if (tn->internal[x])
++						yaffs_FreeTnode(dev, tn->internal[x]);
+ 					tn->internal[x] = passedTn;
+ 
+-				} else if(!tn->internal[x]) {
++				} else if (!tn->internal[x]) {
+ 					/* Don't have one, none passed in */
+ 					tn->internal[x] = yaffs_GetTnode(dev);
+ 				}
+@@ -1504,31 +1526,29 @@ static yaffs_Tnode *yaffs_AddOrFindLevel
+ 		}
+ 	} else {
+ 		/* top is level 0 */
+-		if(passedTn) {
+-			memcpy(tn,passedTn,(dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8);
+-			yaffs_FreeTnode(dev,passedTn);
++		if (passedTn) {
++			memcpy(tn, passedTn, (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8);
++			yaffs_FreeTnode(dev, passedTn);
+ 		}
+ 	}
+ 
+ 	return tn;
+ }
+ 
+-static int yaffs_FindChunkInGroup(yaffs_Device * dev, int theChunk,
+-				  yaffs_ExtendedTags * tags, int objectId,
+-				  int chunkInInode)
++static int yaffs_FindChunkInGroup(yaffs_Device *dev, int theChunk,
++				yaffs_ExtendedTags *tags, int objectId,
++				int chunkInInode)
+ {
+ 	int j;
+ 
+ 	for (j = 0; theChunk && j < dev->chunkGroupSize; j++) {
+-		if (yaffs_CheckChunkBit
+-		    (dev, theChunk / dev->nChunksPerBlock,
+-		     theChunk % dev->nChunksPerBlock)) {
++		if (yaffs_CheckChunkBit(dev, theChunk / dev->nChunksPerBlock,
++				theChunk % dev->nChunksPerBlock)) {
+ 			yaffs_ReadChunkWithTagsFromNAND(dev, theChunk, NULL,
+ 							tags);
+ 			if (yaffs_TagsMatch(tags, objectId, chunkInInode)) {
+ 				/* found it; */
+ 				return theChunk;
+-
+ 			}
+ 		}
+ 		theChunk++;
+@@ -1543,7 +1563,7 @@ static int yaffs_FindChunkInGroup(yaffs_
+  * Returns 0 if it stopped early due to hitting the limit and the delete is incomplete.
+  */
+ 
+-static int yaffs_DeleteWorker(yaffs_Object * in, yaffs_Tnode * tn, __u32 level,
++static int yaffs_DeleteWorker(yaffs_Object *in, yaffs_Tnode *tn, __u32 level,
+ 			      int chunkOffset, int *limit)
+ {
+ 	int i;
+@@ -1557,7 +1577,6 @@ static int yaffs_DeleteWorker(yaffs_Obje
+ 
+ 	if (tn) {
+ 		if (level > 0) {
+-
+ 			for (i = YAFFS_NTNODES_INTERNAL - 1; allDone && i >= 0;
+ 			     i--) {
+ 				if (tn->internal[i]) {
+@@ -1565,17 +1584,17 @@ static int yaffs_DeleteWorker(yaffs_Obje
+ 						allDone = 0;
+ 					} else {
+ 						allDone =
+-						    yaffs_DeleteWorker(in,
+-								       tn->
+-								       internal
+-								       [i],
+-								       level -
+-								       1,
+-								       (chunkOffset
++							yaffs_DeleteWorker(in,
++								tn->
++								internal
++								[i],
++								level -
++								1,
++								(chunkOffset
+ 									<<
+ 									YAFFS_TNODES_INTERNAL_BITS)
+-								       + i,
+-								       limit);
++								+ i,
++								limit);
+ 					}
+ 					if (allDone) {
+ 						yaffs_FreeTnode(dev,
+@@ -1584,27 +1603,25 @@ static int yaffs_DeleteWorker(yaffs_Obje
+ 						tn->internal[i] = NULL;
+ 					}
+ 				}
+-
+ 			}
+ 			return (allDone) ? 1 : 0;
+ 		} else if (level == 0) {
+ 			int hitLimit = 0;
+ 
+ 			for (i = YAFFS_NTNODES_LEVEL0 - 1; i >= 0 && !hitLimit;
+-			     i--) {
+-			        theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
++					i--) {
++				theChunk = yaffs_GetChunkGroupBase(dev, tn, i);
+ 				if (theChunk) {
+ 
+-					chunkInInode =
+-					    (chunkOffset <<
+-					     YAFFS_TNODES_LEVEL0_BITS) + i;
++					chunkInInode = (chunkOffset <<
++						YAFFS_TNODES_LEVEL0_BITS) + i;
+ 
+ 					foundChunk =
+-					    yaffs_FindChunkInGroup(dev,
+-								   theChunk,
+-								   &tags,
+-								   in->objectId,
+-								   chunkInInode);
++						yaffs_FindChunkInGroup(dev,
++								theChunk,
++								&tags,
++								in->objectId,
++								chunkInInode);
+ 
+ 					if (foundChunk > 0) {
+ 						yaffs_DeleteChunk(dev,
+@@ -1613,14 +1630,13 @@ static int yaffs_DeleteWorker(yaffs_Obje
+ 						in->nDataChunks--;
+ 						if (limit) {
+ 							*limit = *limit - 1;
+-							if (*limit <= 0) {
++							if (*limit <= 0)
+ 								hitLimit = 1;
+-							}
+ 						}
+ 
+ 					}
+ 
+-					yaffs_PutLevel0Tnode(dev,tn,i,0);
++					yaffs_PutLevel0Tnode(dev, tn, i, 0);
+ 				}
+ 
+ 			}
+@@ -1634,9 +1650,8 @@ static int yaffs_DeleteWorker(yaffs_Obje
+ 
+ }
+ 
+-static void yaffs_SoftDeleteChunk(yaffs_Device * dev, int chunk)
++static void yaffs_SoftDeleteChunk(yaffs_Device *dev, int chunk)
+ {
+-
+ 	yaffs_BlockInfo *theBlock;
+ 
+ 	T(YAFFS_TRACE_DELETION, (TSTR("soft delete chunk %d" TENDSTR), chunk));
+@@ -1654,7 +1669,7 @@ static void yaffs_SoftDeleteChunk(yaffs_
+  * Thus, essentially this is the same as DeleteWorker except that the chunks are soft deleted.
+  */
+ 
+-static int yaffs_SoftDeleteWorker(yaffs_Object * in, yaffs_Tnode * tn,
++static int yaffs_SoftDeleteWorker(yaffs_Object *in, yaffs_Tnode *tn,
+ 				  __u32 level, int chunkOffset)
+ {
+ 	int i;
+@@ -1691,14 +1706,14 @@ static int yaffs_SoftDeleteWorker(yaffs_
+ 		} else if (level == 0) {
+ 
+ 			for (i = YAFFS_NTNODES_LEVEL0 - 1; i >= 0; i--) {
+-				theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
++				theChunk = yaffs_GetChunkGroupBase(dev, tn, i);
+ 				if (theChunk) {
+ 					/* Note this does not find the real chunk, only the chunk group.
+ 					 * We make an assumption that a chunk group is not larger than
+ 					 * a block.
+ 					 */
+ 					yaffs_SoftDeleteChunk(dev, theChunk);
+-					yaffs_PutLevel0Tnode(dev,tn,i,0);
++					yaffs_PutLevel0Tnode(dev, tn, i, 0);
+ 				}
+ 
+ 			}
+@@ -1712,7 +1727,7 @@ static int yaffs_SoftDeleteWorker(yaffs_
+ 
+ }
+ 
+-static void yaffs_SoftDeleteFile(yaffs_Object * obj)
++static void yaffs_SoftDeleteFile(yaffs_Object *obj)
+ {
+ 	if (obj->deleted &&
+ 	    obj->variantType == YAFFS_OBJECT_TYPE_FILE && !obj->softDeleted) {
+@@ -1746,8 +1761,8 @@ static void yaffs_SoftDeleteFile(yaffs_O
+  * by a special case.
+  */
+ 
+-static yaffs_Tnode *yaffs_PruneWorker(yaffs_Device * dev, yaffs_Tnode * tn,
+-				      __u32 level, int del0)
++static yaffs_Tnode *yaffs_PruneWorker(yaffs_Device *dev, yaffs_Tnode *tn,
++				__u32 level, int del0)
+ {
+ 	int i;
+ 	int hasData;
+@@ -1763,9 +1778,8 @@ static yaffs_Tnode *yaffs_PruneWorker(ya
+ 						      (i == 0) ? del0 : 1);
+ 			}
+ 
+-			if (tn->internal[i]) {
++			if (tn->internal[i])
+ 				hasData++;
+-			}
+ 		}
+ 
+ 		if (hasData == 0 && del0) {
+@@ -1781,8 +1795,8 @@ static yaffs_Tnode *yaffs_PruneWorker(ya
+ 
+ }
+ 
+-static int yaffs_PruneFileStructure(yaffs_Device * dev,
+-				    yaffs_FileStructure * fStruct)
++static int yaffs_PruneFileStructure(yaffs_Device *dev,
++				yaffs_FileStructure *fStruct)
+ {
+ 	int i;
+ 	int hasData;
+@@ -1805,9 +1819,8 @@ static int yaffs_PruneFileStructure(yaff
+ 
+ 			hasData = 0;
+ 			for (i = 1; i < YAFFS_NTNODES_INTERNAL; i++) {
+-				if (tn->internal[i]) {
++				if (tn->internal[i])
+ 					hasData++;
+-				}
+ 			}
+ 
+ 			if (!hasData) {
+@@ -1828,7 +1841,7 @@ static int yaffs_PruneFileStructure(yaff
+ /* yaffs_CreateFreeObjects creates a bunch more objects and
+  * adds them to the object free list.
+  */
+-static int yaffs_CreateFreeObjects(yaffs_Device * dev, int nObjects)
++static int yaffs_CreateFreeObjects(yaffs_Device *dev, int nObjects)
+ {
+ 	int i;
+ 	yaffs_Object *newObjects;
+@@ -1842,9 +1855,9 @@ static int yaffs_CreateFreeObjects(yaffs
+ 	list = YMALLOC(sizeof(yaffs_ObjectList));
+ 
+ 	if (!newObjects || !list) {
+-		if(newObjects)
++		if (newObjects)
+ 			YFREE(newObjects);
+-		if(list)
++		if (list)
+ 			YFREE(list);
+ 		T(YAFFS_TRACE_ALLOCATE,
+ 		  (TSTR("yaffs: Could not allocate more objects" TENDSTR)));
+@@ -1854,7 +1867,7 @@ static int yaffs_CreateFreeObjects(yaffs
+ 	/* Hook them into the free list */
+ 	for (i = 0; i < nObjects - 1; i++) {
+ 		newObjects[i].siblings.next =
+-		    (struct list_head *)(&newObjects[i + 1]);
++				(struct ylist_head *)(&newObjects[i + 1]);
+ 	}
+ 
+ 	newObjects[nObjects - 1].siblings.next = (void *)dev->freeObjects;
+@@ -1873,85 +1886,109 @@ static int yaffs_CreateFreeObjects(yaffs
+ 
+ 
+ /* AllocateEmptyObject gets us a clean Object. Tries to make allocate more if we run out */
+-static yaffs_Object *yaffs_AllocateEmptyObject(yaffs_Device * dev)
++static yaffs_Object *yaffs_AllocateEmptyObject(yaffs_Device *dev)
+ {
+ 	yaffs_Object *tn = NULL;
+ 
++#ifdef VALGRIND_TEST
++	tn = YMALLOC(sizeof(yaffs_Object));
++#else
+ 	/* If there are none left make more */
+-	if (!dev->freeObjects) {
++	if (!dev->freeObjects)
+ 		yaffs_CreateFreeObjects(dev, YAFFS_ALLOCATION_NOBJECTS);
+-	}
+ 
+ 	if (dev->freeObjects) {
+ 		tn = dev->freeObjects;
+ 		dev->freeObjects =
+-		    (yaffs_Object *) (dev->freeObjects->siblings.next);
++			(yaffs_Object *) (dev->freeObjects->siblings.next);
+ 		dev->nFreeObjects--;
+-
++	}
++#endif
++	if (tn) {
+ 		/* Now sweeten it up... */
+ 
+ 		memset(tn, 0, sizeof(yaffs_Object));
++		tn->beingCreated = 1;
++
+ 		tn->myDev = dev;
+-		tn->chunkId = -1;
++		tn->hdrChunk = 0;
+ 		tn->variantType = YAFFS_OBJECT_TYPE_UNKNOWN;
+-		INIT_LIST_HEAD(&(tn->hardLinks));
+-		INIT_LIST_HEAD(&(tn->hashLink));
+-		INIT_LIST_HEAD(&tn->siblings);
++		YINIT_LIST_HEAD(&(tn->hardLinks));
++		YINIT_LIST_HEAD(&(tn->hashLink));
++		YINIT_LIST_HEAD(&tn->siblings);
++
++
++		/* Now make the directory sane */
++		if (dev->rootDir) {
++			tn->parent = dev->rootDir;
++			ylist_add(&(tn->siblings), &dev->rootDir->variant.directoryVariant.children);
++		}
+ 
+ 		/* Add it to the lost and found directory.
+ 		 * NB Can't put root or lostNFound in lostNFound so
+ 		 * check if lostNFound exists first
+ 		 */
+-		if (dev->lostNFoundDir) {
++		if (dev->lostNFoundDir)
+ 			yaffs_AddObjectToDirectory(dev->lostNFoundDir, tn);
+-		}
++
++		tn->beingCreated = 0;
+ 	}
+ 
++	dev->nCheckpointBlocksRequired = 0; /* force recalculation*/
++
+ 	return tn;
+ }
+ 
+-static yaffs_Object *yaffs_CreateFakeDirectory(yaffs_Device * dev, int number,
++static yaffs_Object *yaffs_CreateFakeDirectory(yaffs_Device *dev, int number,
+ 					       __u32 mode)
+ {
+ 
+ 	yaffs_Object *obj =
+ 	    yaffs_CreateNewObject(dev, number, YAFFS_OBJECT_TYPE_DIRECTORY);
+ 	if (obj) {
+-		obj->fake = 1;		/* it is fake so it has no NAND presence... */
++		obj->fake = 1;		/* it is fake so it might have no NAND presence... */
+ 		obj->renameAllowed = 0;	/* ... and we're not allowed to rename it... */
+ 		obj->unlinkAllowed = 0;	/* ... or unlink it */
+ 		obj->deleted = 0;
+ 		obj->unlinked = 0;
+ 		obj->yst_mode = mode;
+ 		obj->myDev = dev;
+-		obj->chunkId = 0;	/* Not a valid chunk. */
++		obj->hdrChunk = 0;	/* Not a valid chunk. */
+ 	}
+ 
+ 	return obj;
+ 
+ }
+ 
+-static void yaffs_UnhashObject(yaffs_Object * tn)
++static void yaffs_UnhashObject(yaffs_Object *tn)
+ {
+ 	int bucket;
+ 	yaffs_Device *dev = tn->myDev;
+ 
+ 	/* If it is still linked into the bucket list, free from the list */
+-	if (!list_empty(&tn->hashLink)) {
+-		list_del_init(&tn->hashLink);
++	if (!ylist_empty(&tn->hashLink)) {
++		ylist_del_init(&tn->hashLink);
+ 		bucket = yaffs_HashFunction(tn->objectId);
+ 		dev->objectBucket[bucket].count--;
+ 	}
+-
+ }
+ 
+ /*  FreeObject frees up a Object and puts it back on the free list */
+-static void yaffs_FreeObject(yaffs_Object * tn)
++static void yaffs_FreeObject(yaffs_Object *tn)
+ {
+-
+ 	yaffs_Device *dev = tn->myDev;
+ 
+-#ifdef  __KERNEL__
++#ifdef __KERNEL__
++	T(YAFFS_TRACE_OS, (TSTR("FreeObject %p inode %p"TENDSTR), tn, tn->myInode));
++#endif
++
++	if (tn->parent)
++		YBUG();
++	if (!ylist_empty(&tn->siblings))
++		YBUG();
++
++
++#ifdef __KERNEL__
+ 	if (tn->myInode) {
+ 		/* We're still hooked up to a cached inode.
+ 		 * Don't delete now, but mark for later deletion
+@@ -1963,24 +2000,28 @@ static void yaffs_FreeObject(yaffs_Objec
+ 
+ 	yaffs_UnhashObject(tn);
+ 
++#ifdef VALGRIND_TEST
++	YFREE(tn);
++#else
+ 	/* Link into the free list. */
+-	tn->siblings.next = (struct list_head *)(dev->freeObjects);
++	tn->siblings.next = (struct ylist_head *)(dev->freeObjects);
+ 	dev->freeObjects = tn;
+ 	dev->nFreeObjects++;
++#endif
++	dev->nCheckpointBlocksRequired = 0; /* force recalculation*/
+ }
+ 
+ #ifdef __KERNEL__
+ 
+-void yaffs_HandleDeferedFree(yaffs_Object * obj)
++void yaffs_HandleDeferedFree(yaffs_Object *obj)
+ {
+-	if (obj->deferedFree) {
++	if (obj->deferedFree)
+ 		yaffs_FreeObject(obj);
+-	}
+ }
+ 
+ #endif
+ 
+-static void yaffs_DeinitialiseObjects(yaffs_Device * dev)
++static void yaffs_DeinitialiseObjects(yaffs_Device *dev)
+ {
+ 	/* Free the list of allocated Objects */
+ 
+@@ -1998,7 +2039,7 @@ static void yaffs_DeinitialiseObjects(ya
+ 	dev->nFreeObjects = 0;
+ }
+ 
+-static void yaffs_InitialiseObjects(yaffs_Device * dev)
++static void yaffs_InitialiseObjects(yaffs_Device *dev)
+ {
+ 	int i;
+ 
+@@ -2007,15 +2048,14 @@ static void yaffs_InitialiseObjects(yaff
+ 	dev->nFreeObjects = 0;
+ 
+ 	for (i = 0; i < YAFFS_NOBJECT_BUCKETS; i++) {
+-		INIT_LIST_HEAD(&dev->objectBucket[i].list);
++		YINIT_LIST_HEAD(&dev->objectBucket[i].list);
+ 		dev->objectBucket[i].count = 0;
+ 	}
+-
+ }
+ 
+-static int yaffs_FindNiceObjectBucket(yaffs_Device * dev)
++static int yaffs_FindNiceObjectBucket(yaffs_Device *dev)
+ {
+-	static int x = 0;
++	static int x;
+ 	int i;
+ 	int l = 999;
+ 	int lowest = 999999;
+@@ -2049,7 +2089,7 @@ static int yaffs_FindNiceObjectBucket(ya
+ 	return l;
+ }
+ 
+-static int yaffs_CreateNewObjectNumber(yaffs_Device * dev)
++static int yaffs_CreateNewObjectNumber(yaffs_Device *dev)
+ {
+ 	int bucket = yaffs_FindNiceObjectBucket(dev);
+ 
+@@ -2058,7 +2098,7 @@ static int yaffs_CreateNewObjectNumber(y
+ 	 */
+ 
+ 	int found = 0;
+-	struct list_head *i;
++	struct ylist_head *i;
+ 
+ 	__u32 n = (__u32) bucket;
+ 
+@@ -2068,41 +2108,38 @@ static int yaffs_CreateNewObjectNumber(y
+ 		found = 1;
+ 		n += YAFFS_NOBJECT_BUCKETS;
+ 		if (1 || dev->objectBucket[bucket].count > 0) {
+-			list_for_each(i, &dev->objectBucket[bucket].list) {
++			ylist_for_each(i, &dev->objectBucket[bucket].list) {
+ 				/* If there is already one in the list */
+-				if (i
+-				    && list_entry(i, yaffs_Object,
+-						  hashLink)->objectId == n) {
++				if (i && ylist_entry(i, yaffs_Object,
++						hashLink)->objectId == n) {
+ 					found = 0;
+ 				}
+ 			}
+ 		}
+ 	}
+ 
+-
+ 	return n;
+ }
+ 
+-static void yaffs_HashObject(yaffs_Object * in)
++static void yaffs_HashObject(yaffs_Object *in)
+ {
+ 	int bucket = yaffs_HashFunction(in->objectId);
+ 	yaffs_Device *dev = in->myDev;
+ 
+-	list_add(&in->hashLink, &dev->objectBucket[bucket].list);
++	ylist_add(&in->hashLink, &dev->objectBucket[bucket].list);
+ 	dev->objectBucket[bucket].count++;
+-
+ }
+ 
+-yaffs_Object *yaffs_FindObjectByNumber(yaffs_Device * dev, __u32 number)
++yaffs_Object *yaffs_FindObjectByNumber(yaffs_Device *dev, __u32 number)
+ {
+ 	int bucket = yaffs_HashFunction(number);
+-	struct list_head *i;
++	struct ylist_head *i;
+ 	yaffs_Object *in;
+ 
+-	list_for_each(i, &dev->objectBucket[bucket].list) {
++	ylist_for_each(i, &dev->objectBucket[bucket].list) {
+ 		/* Look if it is in the list */
+ 		if (i) {
+-			in = list_entry(i, yaffs_Object, hashLink);
++			in = ylist_entry(i, yaffs_Object, hashLink);
+ 			if (in->objectId == number) {
+ #ifdef __KERNEL__
+ 				/* Don't tell the VFS about this one if it is defered free */
+@@ -2118,31 +2155,27 @@ yaffs_Object *yaffs_FindObjectByNumber(y
+ 	return NULL;
+ }
+ 
+-yaffs_Object *yaffs_CreateNewObject(yaffs_Device * dev, int number,
++yaffs_Object *yaffs_CreateNewObject(yaffs_Device *dev, int number,
+ 				    yaffs_ObjectType type)
+ {
+-
+ 	yaffs_Object *theObject;
+-	yaffs_Tnode *tn;
++	yaffs_Tnode *tn = NULL;
+ 
+-	if (number < 0) {
++	if (number < 0)
+ 		number = yaffs_CreateNewObjectNumber(dev);
+-	}
+ 
+ 	theObject = yaffs_AllocateEmptyObject(dev);
+-	if(!theObject)
++	if (!theObject)
+ 		return NULL;
+ 
+-	if(type == YAFFS_OBJECT_TYPE_FILE){
++	if (type == YAFFS_OBJECT_TYPE_FILE) {
+ 		tn = yaffs_GetTnode(dev);
+-		if(!tn){
++		if (!tn) {
+ 			yaffs_FreeObject(theObject);
+ 			return NULL;
+ 		}
+ 	}
+ 
+-
+-
+ 	if (theObject) {
+ 		theObject->fake = 0;
+ 		theObject->renameAllowed = 1;
+@@ -2171,8 +2204,8 @@ yaffs_Object *yaffs_CreateNewObject(yaff
+ 			theObject->variant.fileVariant.top = tn;
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_DIRECTORY:
+-			INIT_LIST_HEAD(&theObject->variant.directoryVariant.
+-				       children);
++			YINIT_LIST_HEAD(&theObject->variant.directoryVariant.
++					children);
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_SYMLINK:
+ 		case YAFFS_OBJECT_TYPE_HARDLINK:
+@@ -2188,32 +2221,30 @@ yaffs_Object *yaffs_CreateNewObject(yaff
+ 	return theObject;
+ }
+ 
+-static yaffs_Object *yaffs_FindOrCreateObjectByNumber(yaffs_Device * dev,
++static yaffs_Object *yaffs_FindOrCreateObjectByNumber(yaffs_Device *dev,
+ 						      int number,
+ 						      yaffs_ObjectType type)
+ {
+ 	yaffs_Object *theObject = NULL;
+ 
+-	if (number > 0) {
++	if (number > 0)
+ 		theObject = yaffs_FindObjectByNumber(dev, number);
+-	}
+ 
+-	if (!theObject) {
++	if (!theObject)
+ 		theObject = yaffs_CreateNewObject(dev, number, type);
+-	}
+ 
+ 	return theObject;
+ 
+ }
+ 
+ 
+-static YCHAR *yaffs_CloneString(const YCHAR * str)
++static YCHAR *yaffs_CloneString(const YCHAR *str)
+ {
+ 	YCHAR *newStr = NULL;
+ 
+ 	if (str && *str) {
+ 		newStr = YMALLOC((yaffs_strlen(str) + 1) * sizeof(YCHAR));
+-		if(newStr)
++		if (newStr)
+ 			yaffs_strcpy(newStr, str);
+ 	}
+ 
+@@ -2229,29 +2260,31 @@ static YCHAR *yaffs_CloneString(const YC
+  */
+ 
+ static yaffs_Object *yaffs_MknodObject(yaffs_ObjectType type,
+-				       yaffs_Object * parent,
+-				       const YCHAR * name,
++				       yaffs_Object *parent,
++				       const YCHAR *name,
+ 				       __u32 mode,
+ 				       __u32 uid,
+ 				       __u32 gid,
+-				       yaffs_Object * equivalentObject,
+-				       const YCHAR * aliasString, __u32 rdev)
++				       yaffs_Object *equivalentObject,
++				       const YCHAR *aliasString, __u32 rdev)
+ {
+ 	yaffs_Object *in;
+-	YCHAR *str;
++	YCHAR *str = NULL;
+ 
+ 	yaffs_Device *dev = parent->myDev;
+ 
+ 	/* Check if the entry exists. If it does then fail the call since we don't want a dup.*/
+-	if (yaffs_FindObjectByName(parent, name)) {
++	if (yaffs_FindObjectByName(parent, name))
+ 		return NULL;
+-	}
+ 
+ 	in = yaffs_CreateNewObject(dev, -1, type);
+ 
+-	if(type == YAFFS_OBJECT_TYPE_SYMLINK){
++	if (!in)
++		return YAFFS_FAIL;
++
++	if (type == YAFFS_OBJECT_TYPE_SYMLINK) {
+ 		str = yaffs_CloneString(aliasString);
+-		if(!str){
++		if (!str) {
+ 			yaffs_FreeObject(in);
+ 			return NULL;
+ 		}
+@@ -2260,7 +2293,7 @@ static yaffs_Object *yaffs_MknodObject(y
+ 
+ 
+ 	if (in) {
+-		in->chunkId = -1;
++		in->hdrChunk = 0;
+ 		in->valid = 1;
+ 		in->variantType = type;
+ 
+@@ -2293,10 +2326,10 @@ static yaffs_Object *yaffs_MknodObject(y
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_HARDLINK:
+ 			in->variant.hardLinkVariant.equivalentObject =
+-			    equivalentObject;
++				equivalentObject;
+ 			in->variant.hardLinkVariant.equivalentObjectId =
+-			    equivalentObject->objectId;
+-			list_add(&in->hardLinks, &equivalentObject->hardLinks);
++				equivalentObject->objectId;
++			ylist_add(&in->hardLinks, &equivalentObject->hardLinks);
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_FILE:
+ 		case YAFFS_OBJECT_TYPE_DIRECTORY:
+@@ -2308,7 +2341,7 @@ static yaffs_Object *yaffs_MknodObject(y
+ 
+ 		if (yaffs_UpdateObjectHeader(in, name, 0, 0, 0) < 0) {
+ 			/* Could not create the object header, fail the creation */
+-			yaffs_DestroyObject(in);
++			yaffs_DeleteObject(in);
+ 			in = NULL;
+ 		}
+ 
+@@ -2317,38 +2350,38 @@ static yaffs_Object *yaffs_MknodObject(y
+ 	return in;
+ }
+ 
+-yaffs_Object *yaffs_MknodFile(yaffs_Object * parent, const YCHAR * name,
+-			      __u32 mode, __u32 uid, __u32 gid)
++yaffs_Object *yaffs_MknodFile(yaffs_Object *parent, const YCHAR *name,
++			__u32 mode, __u32 uid, __u32 gid)
+ {
+ 	return yaffs_MknodObject(YAFFS_OBJECT_TYPE_FILE, parent, name, mode,
+-				 uid, gid, NULL, NULL, 0);
++				uid, gid, NULL, NULL, 0);
+ }
+ 
+-yaffs_Object *yaffs_MknodDirectory(yaffs_Object * parent, const YCHAR * name,
+-				   __u32 mode, __u32 uid, __u32 gid)
++yaffs_Object *yaffs_MknodDirectory(yaffs_Object *parent, const YCHAR *name,
++				__u32 mode, __u32 uid, __u32 gid)
+ {
+ 	return yaffs_MknodObject(YAFFS_OBJECT_TYPE_DIRECTORY, parent, name,
+ 				 mode, uid, gid, NULL, NULL, 0);
+ }
+ 
+-yaffs_Object *yaffs_MknodSpecial(yaffs_Object * parent, const YCHAR * name,
+-				 __u32 mode, __u32 uid, __u32 gid, __u32 rdev)
++yaffs_Object *yaffs_MknodSpecial(yaffs_Object *parent, const YCHAR *name,
++				__u32 mode, __u32 uid, __u32 gid, __u32 rdev)
+ {
+ 	return yaffs_MknodObject(YAFFS_OBJECT_TYPE_SPECIAL, parent, name, mode,
+ 				 uid, gid, NULL, NULL, rdev);
+ }
+ 
+-yaffs_Object *yaffs_MknodSymLink(yaffs_Object * parent, const YCHAR * name,
+-				 __u32 mode, __u32 uid, __u32 gid,
+-				 const YCHAR * alias)
++yaffs_Object *yaffs_MknodSymLink(yaffs_Object *parent, const YCHAR *name,
++				__u32 mode, __u32 uid, __u32 gid,
++				const YCHAR *alias)
+ {
+ 	return yaffs_MknodObject(YAFFS_OBJECT_TYPE_SYMLINK, parent, name, mode,
+-				 uid, gid, NULL, alias, 0);
++				uid, gid, NULL, alias, 0);
+ }
+ 
+ /* yaffs_Link returns the object id of the equivalent object.*/
+-yaffs_Object *yaffs_Link(yaffs_Object * parent, const YCHAR * name,
+-			 yaffs_Object * equivalentObject)
++yaffs_Object *yaffs_Link(yaffs_Object *parent, const YCHAR *name,
++			yaffs_Object *equivalentObject)
+ {
+ 	/* Get the real object in case we were fed a hard link as an equivalent object */
+ 	equivalentObject = yaffs_GetEquivalentObject(equivalentObject);
+@@ -2363,33 +2396,31 @@ yaffs_Object *yaffs_Link(yaffs_Object * 
+ 
+ }
+ 
+-static int yaffs_ChangeObjectName(yaffs_Object * obj, yaffs_Object * newDir,
+-				  const YCHAR * newName, int force, int shadows)
++static int yaffs_ChangeObjectName(yaffs_Object *obj, yaffs_Object *newDir,
++				const YCHAR *newName, int force, int shadows)
+ {
+ 	int unlinkOp;
+ 	int deleteOp;
+ 
+ 	yaffs_Object *existingTarget;
+ 
+-	if (newDir == NULL) {
++	if (newDir == NULL)
+ 		newDir = obj->parent;	/* use the old directory */
+-	}
+ 
+ 	if (newDir->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 		T(YAFFS_TRACE_ALWAYS,
+ 		  (TSTR
+-		   ("tragendy: yaffs_ChangeObjectName: newDir is not a directory"
++		   ("tragedy: yaffs_ChangeObjectName: newDir is not a directory"
+ 		    TENDSTR)));
+ 		YBUG();
+ 	}
+ 
+ 	/* TODO: Do we need this different handling for YAFFS2 and YAFFS1?? */
+-	if (obj->myDev->isYaffs2) {
++	if (obj->myDev->isYaffs2)
+ 		unlinkOp = (newDir == obj->myDev->unlinkedDir);
+-	} else {
++	else
+ 		unlinkOp = (newDir == obj->myDev->unlinkedDir
+ 			    && obj->variantType == YAFFS_OBJECT_TYPE_FILE);
+-	}
+ 
+ 	deleteOp = (newDir == obj->myDev->deletedDir);
+ 
+@@ -2415,40 +2446,40 @@ static int yaffs_ChangeObjectName(yaffs_
+ 			obj->unlinked = 1;
+ 
+ 		/* If it is a deletion then we mark it as a shrink for gc purposes. */
+-		if (yaffs_UpdateObjectHeader(obj, newName, 0, deleteOp, shadows)>= 0)
++		if (yaffs_UpdateObjectHeader(obj, newName, 0, deleteOp, shadows) >= 0)
+ 			return YAFFS_OK;
+ 	}
+ 
+ 	return YAFFS_FAIL;
+ }
+ 
+-int yaffs_RenameObject(yaffs_Object * oldDir, const YCHAR * oldName,
+-		       yaffs_Object * newDir, const YCHAR * newName)
++int yaffs_RenameObject(yaffs_Object *oldDir, const YCHAR *oldName,
++		yaffs_Object *newDir, const YCHAR *newName)
+ {
+-	yaffs_Object *obj;
+-	yaffs_Object *existingTarget;
++	yaffs_Object *obj = NULL;
++	yaffs_Object *existingTarget = NULL;
+ 	int force = 0;
+ 
++
++	if (!oldDir || oldDir->variantType != YAFFS_OBJECT_TYPE_DIRECTORY)
++		YBUG();
++	if (!newDir || newDir->variantType != YAFFS_OBJECT_TYPE_DIRECTORY)
++		YBUG();
++
+ #ifdef CONFIG_YAFFS_CASE_INSENSITIVE
+ 	/* Special case for case insemsitive systems (eg. WinCE).
+ 	 * While look-up is case insensitive, the name isn't.
+ 	 * Therefore we might want to change x.txt to X.txt
+ 	*/
+-	if (oldDir == newDir && yaffs_strcmp(oldName, newName) == 0) {
++	if (oldDir == newDir && yaffs_strcmp(oldName, newName) == 0)
+ 		force = 1;
+-	}
+ #endif
+ 
++	else if (yaffs_strlen(newName) > YAFFS_MAX_NAME_LENGTH)
++		/* ENAMETOOLONG */
++		return YAFFS_FAIL;
++
+ 	obj = yaffs_FindObjectByName(oldDir, oldName);
+-	/* Check new name to long. */
+-	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK &&
+-	    yaffs_strlen(newName) > YAFFS_MAX_ALIAS_LENGTH)
+-	  /* ENAMETOOLONG */
+-	  return YAFFS_FAIL;
+-	else if (obj->variantType != YAFFS_OBJECT_TYPE_SYMLINK &&
+-		 yaffs_strlen(newName) > YAFFS_MAX_NAME_LENGTH)
+-	  /* ENAMETOOLONG */
+-	  return YAFFS_FAIL;
+ 
+ 	if (obj && obj->renameAllowed) {
+ 
+@@ -2456,8 +2487,8 @@ int yaffs_RenameObject(yaffs_Object * ol
+ 
+ 		existingTarget = yaffs_FindObjectByName(newDir, newName);
+ 		if (existingTarget &&
+-		    existingTarget->variantType == YAFFS_OBJECT_TYPE_DIRECTORY &&
+-		    !list_empty(&existingTarget->variant.directoryVariant.children)) {
++			existingTarget->variantType == YAFFS_OBJECT_TYPE_DIRECTORY &&
++			!ylist_empty(&existingTarget->variant.directoryVariant.children)) {
+ 			/* There is a target that is a non-empty directory, so we fail */
+ 			return YAFFS_FAIL;	/* EEXIST or ENOTEMPTY */
+ 		} else if (existingTarget && existingTarget != obj) {
+@@ -2465,7 +2496,7 @@ int yaffs_RenameObject(yaffs_Object * ol
+ 			 * but only if it isn't the same object
+ 			 */
+ 			yaffs_ChangeObjectName(obj, newDir, newName, force,
+-					       existingTarget->objectId);
++						existingTarget->objectId);
+ 			yaffs_UnlinkObject(existingTarget);
+ 		}
+ 
+@@ -2476,7 +2507,7 @@ int yaffs_RenameObject(yaffs_Object * ol
+ 
+ /*------------------------- Block Management and Page Allocation ----------------*/
+ 
+-static int yaffs_InitialiseBlocks(yaffs_Device * dev)
++static int yaffs_InitialiseBlocks(yaffs_Device *dev)
+ {
+ 	int nBlocks = dev->internalEndBlock - dev->internalStartBlock + 1;
+ 
+@@ -2487,23 +2518,20 @@ static int yaffs_InitialiseBlocks(yaffs_
+ 
+ 	/* If the first allocation strategy fails, thry the alternate one */
+ 	dev->blockInfo = YMALLOC(nBlocks * sizeof(yaffs_BlockInfo));
+-	if(!dev->blockInfo){
++	if (!dev->blockInfo) {
+ 		dev->blockInfo = YMALLOC_ALT(nBlocks * sizeof(yaffs_BlockInfo));
+ 		dev->blockInfoAlt = 1;
+-	}
+-	else
++	} else
+ 		dev->blockInfoAlt = 0;
+ 
+-	if(dev->blockInfo){
+-
++	if (dev->blockInfo) {
+ 		/* Set up dynamic blockinfo stuff. */
+ 		dev->chunkBitmapStride = (dev->nChunksPerBlock + 7) / 8; /* round up bytes */
+ 		dev->chunkBits = YMALLOC(dev->chunkBitmapStride * nBlocks);
+-		if(!dev->chunkBits){
++		if (!dev->chunkBits) {
+ 			dev->chunkBits = YMALLOC_ALT(dev->chunkBitmapStride * nBlocks);
+ 			dev->chunkBitsAlt = 1;
+-		}
+-		else
++		} else
+ 			dev->chunkBitsAlt = 0;
+ 	}
+ 
+@@ -2514,30 +2542,29 @@ static int yaffs_InitialiseBlocks(yaffs_
+ 	}
+ 
+ 	return YAFFS_FAIL;
+-
+ }
+ 
+-static void yaffs_DeinitialiseBlocks(yaffs_Device * dev)
++static void yaffs_DeinitialiseBlocks(yaffs_Device *dev)
+ {
+-	if(dev->blockInfoAlt && dev->blockInfo)
++	if (dev->blockInfoAlt && dev->blockInfo)
+ 		YFREE_ALT(dev->blockInfo);
+-	else if(dev->blockInfo)
++	else if (dev->blockInfo)
+ 		YFREE(dev->blockInfo);
+ 
+ 	dev->blockInfoAlt = 0;
+ 
+ 	dev->blockInfo = NULL;
+ 
+-	if(dev->chunkBitsAlt && dev->chunkBits)
++	if (dev->chunkBitsAlt && dev->chunkBits)
+ 		YFREE_ALT(dev->chunkBits);
+-	else if(dev->chunkBits)
++	else if (dev->chunkBits)
+ 		YFREE(dev->chunkBits);
+ 	dev->chunkBitsAlt = 0;
+ 	dev->chunkBits = NULL;
+ }
+ 
+-static int yaffs_BlockNotDisqualifiedFromGC(yaffs_Device * dev,
+-					    yaffs_BlockInfo * bi)
++static int yaffs_BlockNotDisqualifiedFromGC(yaffs_Device *dev,
++					yaffs_BlockInfo *bi)
+ {
+ 	int i;
+ 	__u32 seq;
+@@ -2556,7 +2583,7 @@ static int yaffs_BlockNotDisqualifiedFro
+ 		seq = dev->sequenceNumber;
+ 
+ 		for (i = dev->internalStartBlock; i <= dev->internalEndBlock;
+-		     i++) {
++				i++) {
+ 			b = yaffs_GetBlockInfo(dev, i);
+ 			if (b->blockState == YAFFS_BLOCK_STATE_FULL &&
+ 			    (b->pagesInUse - b->softDeletions) <
+@@ -2571,38 +2598,36 @@ static int yaffs_BlockNotDisqualifiedFro
+ 	 * discarded pages.
+ 	 */
+ 	return (bi->sequenceNumber <= dev->oldestDirtySequence);
+-
+ }
+ 
+ /* FindDiretiestBlock is used to select the dirtiest block (or close enough)
+  * for garbage collection.
+  */
+ 
+-static int yaffs_FindBlockForGarbageCollection(yaffs_Device * dev,
+-					       int aggressive)
++static int yaffs_FindBlockForGarbageCollection(yaffs_Device *dev,
++					int aggressive)
+ {
+-
+ 	int b = dev->currentDirtyChecker;
+ 
+ 	int i;
+ 	int iterations;
+ 	int dirtiest = -1;
+ 	int pagesInUse = 0;
+-	int prioritised=0;
++	int prioritised = 0;
+ 	yaffs_BlockInfo *bi;
+ 	int pendingPrioritisedExist = 0;
+ 
+ 	/* First let's see if we need to grab a prioritised block */
+-	if(dev->hasPendingPrioritisedGCs){
+-		for(i = dev->internalStartBlock; i < dev->internalEndBlock && !prioritised; i++){
++	if (dev->hasPendingPrioritisedGCs) {
++		for (i = dev->internalStartBlock; i < dev->internalEndBlock && !prioritised; i++) {
+ 
+ 			bi = yaffs_GetBlockInfo(dev, i);
+-			//yaffs_VerifyBlock(dev,bi,i);
++			/* yaffs_VerifyBlock(dev,bi,i); */
+ 
+-			if(bi->gcPrioritise) {
++			if (bi->gcPrioritise) {
+ 				pendingPrioritisedExist = 1;
+-				if(bi->blockState == YAFFS_BLOCK_STATE_FULL &&
+-				   yaffs_BlockNotDisqualifiedFromGC(dev, bi)){
++				if (bi->blockState == YAFFS_BLOCK_STATE_FULL &&
++				   yaffs_BlockNotDisqualifiedFromGC(dev, bi)) {
+ 					pagesInUse = (bi->pagesInUse - bi->softDeletions);
+ 					dirtiest = i;
+ 					prioritised = 1;
+@@ -2611,7 +2636,7 @@ static int yaffs_FindBlockForGarbageColl
+ 			}
+ 		}
+ 
+-		if(!pendingPrioritisedExist) /* None found, so we can clear this */
++		if (!pendingPrioritisedExist) /* None found, so we can clear this */
+ 			dev->hasPendingPrioritisedGCs = 0;
+ 	}
+ 
+@@ -2623,31 +2648,28 @@ static int yaffs_FindBlockForGarbageColl
+ 
+ 	dev->nonAggressiveSkip--;
+ 
+-	if (!aggressive && (dev->nonAggressiveSkip > 0)) {
++	if (!aggressive && (dev->nonAggressiveSkip > 0))
+ 		return -1;
+-	}
+ 
+-	if(!prioritised)
++	if (!prioritised)
+ 		pagesInUse =
+-	    		(aggressive) ? dev->nChunksPerBlock : YAFFS_PASSIVE_GC_CHUNKS + 1;
++			(aggressive) ? dev->nChunksPerBlock : YAFFS_PASSIVE_GC_CHUNKS + 1;
+ 
+-	if (aggressive) {
++	if (aggressive)
+ 		iterations =
+ 		    dev->internalEndBlock - dev->internalStartBlock + 1;
+-	} else {
++	else {
+ 		iterations =
+ 		    dev->internalEndBlock - dev->internalStartBlock + 1;
+ 		iterations = iterations / 16;
+-		if (iterations > 200) {
++		if (iterations > 200)
+ 			iterations = 200;
+-		}
+ 	}
+ 
+ 	for (i = 0; i <= iterations && pagesInUse > 0 && !prioritised; i++) {
+ 		b++;
+-		if (b < dev->internalStartBlock || b > dev->internalEndBlock) {
++		if (b < dev->internalStartBlock || b > dev->internalEndBlock)
+ 			b = dev->internalStartBlock;
+-		}
+ 
+ 		if (b < dev->internalStartBlock || b > dev->internalEndBlock) {
+ 			T(YAFFS_TRACE_ERROR,
+@@ -2657,17 +2679,9 @@ static int yaffs_FindBlockForGarbageColl
+ 
+ 		bi = yaffs_GetBlockInfo(dev, b);
+ 
+-#if 0
+-		if (bi->blockState == YAFFS_BLOCK_STATE_CHECKPOINT) {
+-			dirtiest = b;
+-			pagesInUse = 0;
+-		}
+-		else
+-#endif
+-
+ 		if (bi->blockState == YAFFS_BLOCK_STATE_FULL &&
+-		       (bi->pagesInUse - bi->softDeletions) < pagesInUse &&
+-		        yaffs_BlockNotDisqualifiedFromGC(dev, bi)) {
++			(bi->pagesInUse - bi->softDeletions) < pagesInUse &&
++				yaffs_BlockNotDisqualifiedFromGC(dev, bi)) {
+ 			dirtiest = b;
+ 			pagesInUse = (bi->pagesInUse - bi->softDeletions);
+ 		}
+@@ -2678,19 +2692,18 @@ static int yaffs_FindBlockForGarbageColl
+ 	if (dirtiest > 0) {
+ 		T(YAFFS_TRACE_GC,
+ 		  (TSTR("GC Selected block %d with %d free, prioritised:%d" TENDSTR), dirtiest,
+-		   dev->nChunksPerBlock - pagesInUse,prioritised));
++		   dev->nChunksPerBlock - pagesInUse, prioritised));
+ 	}
+ 
+ 	dev->oldestDirtySequence = 0;
+ 
+-	if (dirtiest > 0) {
++	if (dirtiest > 0)
+ 		dev->nonAggressiveSkip = 4;
+-	}
+ 
+ 	return dirtiest;
+ }
+ 
+-static void yaffs_BlockBecameDirty(yaffs_Device * dev, int blockNo)
++static void yaffs_BlockBecameDirty(yaffs_Device *dev, int blockNo)
+ {
+ 	yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, blockNo);
+ 
+@@ -2752,7 +2765,7 @@ static void yaffs_BlockBecameDirty(yaffs
+ 	}
+ }
+ 
+-static int yaffs_FindBlockForAllocation(yaffs_Device * dev)
++static int yaffs_FindBlockForAllocation(yaffs_Device *dev)
+ {
+ 	int i;
+ 
+@@ -2763,7 +2776,7 @@ static int yaffs_FindBlockForAllocation(
+ 		 * Can't get space to gc
+ 		 */
+ 		T(YAFFS_TRACE_ERROR,
+-		  (TSTR("yaffs tragedy: no more eraased blocks" TENDSTR)));
++		  (TSTR("yaffs tragedy: no more erased blocks" TENDSTR)));
+ 
+ 		return -1;
+ 	}
+@@ -2794,31 +2807,74 @@ static int yaffs_FindBlockForAllocation(
+ 
+ 	T(YAFFS_TRACE_ALWAYS,
+ 	  (TSTR
+-	   ("yaffs tragedy: no more eraased blocks, but there should have been %d"
++	   ("yaffs tragedy: no more erased blocks, but there should have been %d"
+ 	    TENDSTR), dev->nErasedBlocks));
+ 
+ 	return -1;
+ }
+ 
+ 
+-// Check if there's space to allocate...
+-// Thinks.... do we need top make this ths same as yaffs_GetFreeChunks()?
+-static int yaffs_CheckSpaceForAllocation(yaffs_Device * dev)
++
++static int yaffs_CalcCheckpointBlocksRequired(yaffs_Device *dev)
++{
++	if (!dev->nCheckpointBlocksRequired &&
++	   dev->isYaffs2) {
++		/* Not a valid value so recalculate */
++		int nBytes = 0;
++		int nBlocks;
++		int devBlocks = (dev->endBlock - dev->startBlock + 1);
++		int tnodeSize;
++
++		tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
++
++		if (tnodeSize < sizeof(yaffs_Tnode))
++			tnodeSize = sizeof(yaffs_Tnode);
++
++		nBytes += sizeof(yaffs_CheckpointValidity);
++		nBytes += sizeof(yaffs_CheckpointDevice);
++		nBytes += devBlocks * sizeof(yaffs_BlockInfo);
++		nBytes += devBlocks * dev->chunkBitmapStride;
++		nBytes += (sizeof(yaffs_CheckpointObject) + sizeof(__u32)) * (dev->nObjectsCreated - dev->nFreeObjects);
++		nBytes += (tnodeSize + sizeof(__u32)) * (dev->nTnodesCreated - dev->nFreeTnodes);
++		nBytes += sizeof(yaffs_CheckpointValidity);
++		nBytes += sizeof(__u32); /* checksum*/
++
++		/* Round up and add 2 blocks to allow for some bad blocks, so add 3 */
++
++		nBlocks = (nBytes/(dev->nDataBytesPerChunk * dev->nChunksPerBlock)) + 3;
++
++		dev->nCheckpointBlocksRequired = nBlocks;
++	}
++
++	return dev->nCheckpointBlocksRequired;
++}
++
++/*
++ * Check if there's space to allocate...
++ * Thinks.... do we need top make this ths same as yaffs_GetFreeChunks()?
++ */
++static int yaffs_CheckSpaceForAllocation(yaffs_Device *dev)
+ {
+ 	int reservedChunks;
+ 	int reservedBlocks = dev->nReservedBlocks;
+ 	int checkpointBlocks;
+ 
+-	checkpointBlocks =  dev->nCheckpointReservedBlocks - dev->blocksInCheckpoint;
+-	if(checkpointBlocks < 0)
++	if (dev->isYaffs2) {
++		checkpointBlocks =  yaffs_CalcCheckpointBlocksRequired(dev) -
++				    dev->blocksInCheckpoint;
++		if (checkpointBlocks < 0)
++			checkpointBlocks = 0;
++	} else {
+ 		checkpointBlocks = 0;
++	}
+ 
+ 	reservedChunks = ((reservedBlocks + checkpointBlocks) * dev->nChunksPerBlock);
+ 
+ 	return (dev->nFreeChunks > reservedChunks);
+ }
+ 
+-static int yaffs_AllocateChunk(yaffs_Device * dev, int useReserve, yaffs_BlockInfo **blockUsedPtr)
++static int yaffs_AllocateChunk(yaffs_Device *dev, int useReserve,
++		yaffs_BlockInfo **blockUsedPtr)
+ {
+ 	int retVal;
+ 	yaffs_BlockInfo *bi;
+@@ -2835,7 +2891,7 @@ static int yaffs_AllocateChunk(yaffs_Dev
+ 	}
+ 
+ 	if (dev->nErasedBlocks < dev->nReservedBlocks
+-	    && dev->allocationPage == 0) {
++			&& dev->allocationPage == 0) {
+ 		T(YAFFS_TRACE_ALLOCATE, (TSTR("Allocating reserve" TENDSTR)));
+ 	}
+ 
+@@ -2844,10 +2900,10 @@ static int yaffs_AllocateChunk(yaffs_Dev
+ 		bi = yaffs_GetBlockInfo(dev, dev->allocationBlock);
+ 
+ 		retVal = (dev->allocationBlock * dev->nChunksPerBlock) +
+-		    dev->allocationPage;
++			dev->allocationPage;
+ 		bi->pagesInUse++;
+ 		yaffs_SetChunkBit(dev, dev->allocationBlock,
+-				  dev->allocationPage);
++				dev->allocationPage);
+ 
+ 		dev->allocationPage++;
+ 
+@@ -2859,43 +2915,43 @@ static int yaffs_AllocateChunk(yaffs_Dev
+ 			dev->allocationBlock = -1;
+ 		}
+ 
+-		if(blockUsedPtr)
++		if (blockUsedPtr)
+ 			*blockUsedPtr = bi;
+ 
+ 		return retVal;
+ 	}
+ 
+ 	T(YAFFS_TRACE_ERROR,
+-	  (TSTR("!!!!!!!!! Allocator out !!!!!!!!!!!!!!!!!" TENDSTR)));
++			(TSTR("!!!!!!!!! Allocator out !!!!!!!!!!!!!!!!!" TENDSTR)));
+ 
+ 	return -1;
+ }
+ 
+-static int yaffs_GetErasedChunks(yaffs_Device * dev)
++static int yaffs_GetErasedChunks(yaffs_Device *dev)
+ {
+ 	int n;
+ 
+ 	n = dev->nErasedBlocks * dev->nChunksPerBlock;
+ 
+-	if (dev->allocationBlock > 0) {
++	if (dev->allocationBlock > 0)
+ 		n += (dev->nChunksPerBlock - dev->allocationPage);
+-	}
+ 
+ 	return n;
+ 
+ }
+ 
+-static int yaffs_GarbageCollectBlock(yaffs_Device * dev, int block)
++static int yaffs_GarbageCollectBlock(yaffs_Device *dev, int block,
++		int wholeBlock)
+ {
+ 	int oldChunk;
+ 	int newChunk;
+-	int chunkInBlock;
+ 	int markNAND;
+ 	int retVal = YAFFS_OK;
+ 	int cleanups = 0;
+ 	int i;
+ 	int isCheckpointBlock;
+ 	int matchingChunk;
++	int maxCopies;
+ 
+ 	int chunksBefore = yaffs_GetErasedChunks(dev);
+ 	int chunksAfter;
+@@ -2911,8 +2967,11 @@ static int yaffs_GarbageCollectBlock(yaf
+ 	bi->blockState = YAFFS_BLOCK_STATE_COLLECTING;
+ 
+ 	T(YAFFS_TRACE_TRACING,
+-	  (TSTR("Collecting block %d, in use %d, shrink %d, " TENDSTR), block,
+-	   bi->pagesInUse, bi->hasShrinkHeader));
++			(TSTR("Collecting block %d, in use %d, shrink %d, wholeBlock %d" TENDSTR),
++			 block,
++			 bi->pagesInUse,
++			 bi->hasShrinkHeader,
++			 wholeBlock));
+ 
+ 	/*yaffs_VerifyFreeChunks(dev); */
+ 
+@@ -2926,26 +2985,33 @@ static int yaffs_GarbageCollectBlock(yaf
+ 	dev->isDoingGC = 1;
+ 
+ 	if (isCheckpointBlock ||
+-	    !yaffs_StillSomeChunkBits(dev, block)) {
++			!yaffs_StillSomeChunkBits(dev, block)) {
+ 		T(YAFFS_TRACE_TRACING,
+-		  (TSTR
+-		   ("Collecting block %d that has no chunks in use" TENDSTR),
+-		   block));
++				(TSTR
++				 ("Collecting block %d that has no chunks in use" TENDSTR),
++				 block));
+ 		yaffs_BlockBecameDirty(dev, block);
+ 	} else {
+ 
+ 		__u8 *buffer = yaffs_GetTempBuffer(dev, __LINE__);
+ 
+-		yaffs_VerifyBlock(dev,bi,block);
++		yaffs_VerifyBlock(dev, bi, block);
+ 
+-		for (chunkInBlock = 0, oldChunk = block * dev->nChunksPerBlock;
+-		     chunkInBlock < dev->nChunksPerBlock
+-		     && yaffs_StillSomeChunkBits(dev, block);
+-		     chunkInBlock++, oldChunk++) {
+-			if (yaffs_CheckChunkBit(dev, block, chunkInBlock)) {
++		maxCopies = (wholeBlock) ? dev->nChunksPerBlock : 10;
++		oldChunk = block * dev->nChunksPerBlock + dev->gcChunk;
++
++		for (/* init already done */;
++		     retVal == YAFFS_OK &&
++		     dev->gcChunk < dev->nChunksPerBlock &&
++		     (bi->blockState == YAFFS_BLOCK_STATE_COLLECTING) &&
++		     maxCopies > 0;
++		     dev->gcChunk++, oldChunk++) {
++			if (yaffs_CheckChunkBit(dev, block, dev->gcChunk)) {
+ 
+ 				/* This page is in use and might need to be copied off */
+ 
++				maxCopies--;
++
+ 				markNAND = 1;
+ 
+ 				yaffs_InitialiseTags(&tags);
+@@ -2959,22 +3025,22 @@ static int yaffs_GarbageCollectBlock(yaf
+ 
+ 				T(YAFFS_TRACE_GC_DETAIL,
+ 				  (TSTR
+-				   ("Collecting page %d, %d %d %d " TENDSTR),
+-				   chunkInBlock, tags.objectId, tags.chunkId,
++				   ("Collecting chunk in block %d, %d %d %d " TENDSTR),
++				   dev->gcChunk, tags.objectId, tags.chunkId,
+ 				   tags.byteCount));
+ 
+-				if(object && !yaffs_SkipVerification(dev)){
+-					if(tags.chunkId == 0)
+-						matchingChunk = object->chunkId;
+-					else if(object->softDeleted)
++				if (object && !yaffs_SkipVerification(dev)) {
++					if (tags.chunkId == 0)
++						matchingChunk = object->hdrChunk;
++					else if (object->softDeleted)
+ 						matchingChunk = oldChunk; /* Defeat the test */
+ 					else
+-						matchingChunk = yaffs_FindChunkInFile(object,tags.chunkId,NULL);
++						matchingChunk = yaffs_FindChunkInFile(object, tags.chunkId, NULL);
+ 
+-					if(oldChunk != matchingChunk)
++					if (oldChunk != matchingChunk)
+ 						T(YAFFS_TRACE_ERROR,
+ 						  (TSTR("gc: page in gc mismatch: %d %d %d %d"TENDSTR),
+-						  oldChunk,matchingChunk,tags.objectId, tags.chunkId));
++						  oldChunk, matchingChunk, tags.objectId, tags.chunkId));
+ 
+ 				}
+ 
+@@ -2986,9 +3052,11 @@ static int yaffs_GarbageCollectBlock(yaf
+ 					    tags.objectId, tags.chunkId, tags.byteCount));
+ 				}
+ 
+-				if (object && object->deleted
+-				    && tags.chunkId != 0) {
+-					/* Data chunk in a deleted file, throw it away
++				if (object &&
++				    object->deleted &&
++				    object->softDeleted &&
++				    tags.chunkId != 0) {
++					/* Data chunk in a soft deleted file, throw it away
+ 					 * It's a soft deleted data chunk,
+ 					 * No need to copy this, just forget about it and
+ 					 * fix up the object.
+@@ -3003,13 +3071,12 @@ static int yaffs_GarbageCollectBlock(yaf
+ 						cleanups++;
+ 					}
+ 					markNAND = 0;
+-				} else if (0
+-					   /* Todo object && object->deleted && object->nDataChunks == 0 */
+-					   ) {
++				} else if (0) {
++					/* Todo object && object->deleted && object->nDataChunks == 0 */
+ 					/* Deleted object header with no data chunks.
+ 					 * Can be discarded and the file deleted.
+ 					 */
+-					object->chunkId = 0;
++					object->hdrChunk = 0;
+ 					yaffs_FreeTnode(object->myDev,
+ 							object->variant.
+ 							fileVariant.top);
+@@ -3031,17 +3098,14 @@ static int yaffs_GarbageCollectBlock(yaf
+ 						 * We need to nuke the shrinkheader flags first
+ 						 * We no longer want the shrinkHeader flag since its work is done
+ 						 * and if it is left in place it will mess up scanning.
+-						 * Also, clear out any shadowing stuff
+ 						 */
+ 
+ 						yaffs_ObjectHeader *oh;
+ 						oh = (yaffs_ObjectHeader *)buffer;
+ 						oh->isShrink = 0;
+-						oh->shadowsObject = -1;
+-						tags.extraShadows = 0;
+ 						tags.extraIsShrinkHeader = 0;
+ 
+-						yaffs_VerifyObjectHeader(object,oh,&tags,1);
++						yaffs_VerifyObjectHeader(object, oh, &tags, 1);
+ 					}
+ 
+ 					newChunk =
+@@ -3055,7 +3119,7 @@ static int yaffs_GarbageCollectBlock(yaf
+ 
+ 						if (tags.chunkId == 0) {
+ 							/* It's a header */
+-							object->chunkId =  newChunk;
++							object->hdrChunk =  newChunk;
+ 							object->serial =   tags.serialNumber;
+ 						} else {
+ 							/* It's a data chunk */
+@@ -3067,7 +3131,8 @@ static int yaffs_GarbageCollectBlock(yaf
+ 					}
+ 				}
+ 
+-				yaffs_DeleteChunk(dev, oldChunk, markNAND, __LINE__);
++				if (retVal == YAFFS_OK)
++					yaffs_DeleteChunk(dev, oldChunk, markNAND, __LINE__);
+ 
+ 			}
+ 		}
+@@ -3098,18 +3163,25 @@ static int yaffs_GarbageCollectBlock(yaf
+ 
+ 	}
+ 
+-	yaffs_VerifyCollectedBlock(dev,bi,block);
++	yaffs_VerifyCollectedBlock(dev, bi, block);
+ 
+-	if (chunksBefore >= (chunksAfter = yaffs_GetErasedChunks(dev))) {
++	chunksAfter = yaffs_GetErasedChunks(dev);
++	if (chunksBefore >= chunksAfter) {
+ 		T(YAFFS_TRACE_GC,
+ 		  (TSTR
+ 		   ("gc did not increase free chunks before %d after %d"
+ 		    TENDSTR), chunksBefore, chunksAfter));
+ 	}
+ 
++	/* If the gc completed then clear the current gcBlock so that we find another. */
++	if (bi->blockState != YAFFS_BLOCK_STATE_COLLECTING) {
++		dev->gcBlock = -1;
++		dev->gcChunk = 0;
++	}
++
+ 	dev->isDoingGC = 0;
+ 
+-	return YAFFS_OK;
++	return retVal;
+ }
+ 
+ /* New garbage collector
+@@ -3121,7 +3193,7 @@ static int yaffs_GarbageCollectBlock(yaf
+  * The idea is to help clear out space in a more spread-out manner.
+  * Dunno if it really does anything useful.
+  */
+-static int yaffs_CheckGarbageCollection(yaffs_Device * dev)
++static int yaffs_CheckGarbageCollection(yaffs_Device *dev)
+ {
+ 	int block;
+ 	int aggressive;
+@@ -3142,8 +3214,8 @@ static int yaffs_CheckGarbageCollection(
+ 	do {
+ 		maxTries++;
+ 
+-		checkpointBlockAdjust = (dev->nCheckpointReservedBlocks - dev->blocksInCheckpoint);
+-		if(checkpointBlockAdjust < 0)
++		checkpointBlockAdjust = yaffs_CalcCheckpointBlocksRequired(dev) - dev->blocksInCheckpoint;
++		if (checkpointBlockAdjust < 0)
+ 			checkpointBlockAdjust = 0;
+ 
+ 		if (dev->nErasedBlocks < (dev->nReservedBlocks + checkpointBlockAdjust + 2)) {
+@@ -3154,20 +3226,24 @@ static int yaffs_CheckGarbageCollection(
+ 			aggressive = 0;
+ 		}
+ 
+-		block = yaffs_FindBlockForGarbageCollection(dev, aggressive);
++		if (dev->gcBlock <= 0) {
++			dev->gcBlock = yaffs_FindBlockForGarbageCollection(dev, aggressive);
++			dev->gcChunk = 0;
++		}
++
++		block = dev->gcBlock;
+ 
+ 		if (block > 0) {
+ 			dev->garbageCollections++;
+-			if (!aggressive) {
++			if (!aggressive)
+ 				dev->passiveGarbageCollections++;
+-			}
+ 
+ 			T(YAFFS_TRACE_GC,
+ 			  (TSTR
+ 			   ("yaffs: GC erasedBlocks %d aggressive %d" TENDSTR),
+ 			   dev->nErasedBlocks, aggressive));
+ 
+-			gcOk = yaffs_GarbageCollectBlock(dev, block);
++			gcOk = yaffs_GarbageCollectBlock(dev, block, aggressive);
+ 		}
+ 
+ 		if (dev->nErasedBlocks < (dev->nReservedBlocks) && block > 0) {
+@@ -3176,15 +3252,16 @@ static int yaffs_CheckGarbageCollection(
+ 			   ("yaffs: GC !!!no reclaim!!! erasedBlocks %d after try %d block %d"
+ 			    TENDSTR), dev->nErasedBlocks, maxTries, block));
+ 		}
+-	} while ((dev->nErasedBlocks < dev->nReservedBlocks) && (block > 0)
+-		 && (maxTries < 2));
++	} while ((dev->nErasedBlocks < dev->nReservedBlocks) &&
++		 (block > 0) &&
++		 (maxTries < 2));
+ 
+ 	return aggressive ? gcOk : YAFFS_OK;
+ }
+ 
+ /*-------------------------  TAGS --------------------------------*/
+ 
+-static int yaffs_TagsMatch(const yaffs_ExtendedTags * tags, int objectId,
++static int yaffs_TagsMatch(const yaffs_ExtendedTags *tags, int objectId,
+ 			   int chunkInObject)
+ {
+ 	return (tags->chunkId == chunkInObject &&
+@@ -3195,8 +3272,8 @@ static int yaffs_TagsMatch(const yaffs_E
+ 
+ /*-------------------- Data file manipulation -----------------*/
+ 
+-static int yaffs_FindChunkInFile(yaffs_Object * in, int chunkInInode,
+-				 yaffs_ExtendedTags * tags)
++static int yaffs_FindChunkInFile(yaffs_Object *in, int chunkInInode,
++				 yaffs_ExtendedTags *tags)
+ {
+ 	/*Get the Tnode, then get the level 0 offset chunk offset */
+ 	yaffs_Tnode *tn;
+@@ -3214,7 +3291,7 @@ static int yaffs_FindChunkInFile(yaffs_O
+ 	tn = yaffs_FindLevel0Tnode(dev, &in->variant.fileVariant, chunkInInode);
+ 
+ 	if (tn) {
+-		theChunk = yaffs_GetChunkGroupBase(dev,tn,chunkInInode);
++		theChunk = yaffs_GetChunkGroupBase(dev, tn, chunkInInode);
+ 
+ 		retVal =
+ 		    yaffs_FindChunkInGroup(dev, theChunk, tags, in->objectId,
+@@ -3223,8 +3300,8 @@ static int yaffs_FindChunkInFile(yaffs_O
+ 	return retVal;
+ }
+ 
+-static int yaffs_FindAndDeleteChunkInFile(yaffs_Object * in, int chunkInInode,
+-					  yaffs_ExtendedTags * tags)
++static int yaffs_FindAndDeleteChunkInFile(yaffs_Object *in, int chunkInInode,
++					  yaffs_ExtendedTags *tags)
+ {
+ 	/* Get the Tnode, then get the level 0 offset chunk offset */
+ 	yaffs_Tnode *tn;
+@@ -3243,29 +3320,23 @@ static int yaffs_FindAndDeleteChunkInFil
+ 
+ 	if (tn) {
+ 
+-		theChunk = yaffs_GetChunkGroupBase(dev,tn,chunkInInode);
++		theChunk = yaffs_GetChunkGroupBase(dev, tn, chunkInInode);
+ 
+ 		retVal =
+ 		    yaffs_FindChunkInGroup(dev, theChunk, tags, in->objectId,
+ 					   chunkInInode);
+ 
+ 		/* Delete the entry in the filestructure (if found) */
+-		if (retVal != -1) {
+-			yaffs_PutLevel0Tnode(dev,tn,chunkInInode,0);
+-		}
+-	} else {
+-		/*T(("No level 0 found for %d\n", chunkInInode)); */
++		if (retVal != -1)
++			yaffs_PutLevel0Tnode(dev, tn, chunkInInode, 0);
+ 	}
+ 
+-	if (retVal == -1) {
+-		/* T(("Could not find %d to delete\n",chunkInInode)); */
+-	}
+ 	return retVal;
+ }
+ 
+ #ifdef YAFFS_PARANOID
+ 
+-static int yaffs_CheckFileSanity(yaffs_Object * in)
++static int yaffs_CheckFileSanity(yaffs_Object *in)
+ {
+ 	int chunk;
+ 	int nChunks;
+@@ -3278,10 +3349,8 @@ static int yaffs_CheckFileSanity(yaffs_O
+ 	int theChunk;
+ 	int chunkDeleted;
+ 
+-	if (in->variantType != YAFFS_OBJECT_TYPE_FILE) {
+-		/* T(("Object not a file\n")); */
++	if (in->variantType != YAFFS_OBJECT_TYPE_FILE)
+ 		return YAFFS_FAIL;
+-	}
+ 
+ 	objId = in->objectId;
+ 	fSize = in->variant.fileVariant.fileSize;
+@@ -3294,7 +3363,7 @@ static int yaffs_CheckFileSanity(yaffs_O
+ 
+ 		if (tn) {
+ 
+-			theChunk = yaffs_GetChunkGroupBase(dev,tn,chunk);
++			theChunk = yaffs_GetChunkGroupBase(dev, tn, chunk);
+ 
+ 			if (yaffs_CheckChunkBits
+ 			    (dev, theChunk / dev->nChunksPerBlock,
+@@ -3323,7 +3392,7 @@ static int yaffs_CheckFileSanity(yaffs_O
+ 
+ #endif
+ 
+-static int yaffs_PutChunkIntoFile(yaffs_Object * in, int chunkInInode,
++static int yaffs_PutChunkIntoFile(yaffs_Object *in, int chunkInInode,
+ 				  int chunkInNAND, int inScan)
+ {
+ 	/* NB inScan is zero unless scanning.
+@@ -3358,11 +3427,10 @@ static int yaffs_PutChunkIntoFile(yaffs_
+ 					&in->variant.fileVariant,
+ 					chunkInInode,
+ 					NULL);
+-	if (!tn) {
++	if (!tn)
+ 		return YAFFS_FAIL;
+-	}
+ 
+-	existingChunk = yaffs_GetChunkGroupBase(dev,tn,chunkInInode);
++	existingChunk = yaffs_GetChunkGroupBase(dev, tn, chunkInInode);
+ 
+ 	if (inScan != 0) {
+ 		/* If we're scanning then we need to test for duplicates
+@@ -3374,7 +3442,7 @@ static int yaffs_PutChunkIntoFile(yaffs_
+ 		 * Update: For backward scanning we don't need to re-read tags so this is quite cheap.
+ 		 */
+ 
+-		if (existingChunk != 0) {
++		if (existingChunk > 0) {
+ 			/* NB Right now existing chunk will not be real chunkId if the device >= 32MB
+ 			 *    thus we have to do a FindChunkInFile to get the real chunk id.
+ 			 *
+@@ -3411,8 +3479,10 @@ static int yaffs_PutChunkIntoFile(yaffs_
+ 			 * not be loaded during a scan
+ 			 */
+ 
+-			newSerial = newTags.serialNumber;
+-			existingSerial = existingTags.serialNumber;
++			if (inScan > 0) {
++				newSerial = newTags.serialNumber;
++				existingSerial = existingTags.serialNumber;
++			}
+ 
+ 			if ((inScan > 0) &&
+ 			    (in->myDev->isYaffs2 ||
+@@ -3437,24 +3507,23 @@ static int yaffs_PutChunkIntoFile(yaffs_
+ 
+ 	}
+ 
+-	if (existingChunk == 0) {
++	if (existingChunk == 0)
+ 		in->nDataChunks++;
+-	}
+ 
+-	yaffs_PutLevel0Tnode(dev,tn,chunkInInode,chunkInNAND);
++	yaffs_PutLevel0Tnode(dev, tn, chunkInInode, chunkInNAND);
+ 
+ 	return YAFFS_OK;
+ }
+ 
+-static int yaffs_ReadChunkDataFromObject(yaffs_Object * in, int chunkInInode,
+-					 __u8 * buffer)
++static int yaffs_ReadChunkDataFromObject(yaffs_Object *in, int chunkInInode,
++					__u8 *buffer)
+ {
+ 	int chunkInNAND = yaffs_FindChunkInFile(in, chunkInInode, NULL);
+ 
+-	if (chunkInNAND >= 0) {
++	if (chunkInNAND >= 0)
+ 		return yaffs_ReadChunkWithTagsFromNAND(in->myDev, chunkInNAND,
+-						       buffer,NULL);
+-	} else {
++						buffer, NULL);
++	else {
+ 		T(YAFFS_TRACE_NANDACCESS,
+ 		  (TSTR("Chunk %d not found zero instead" TENDSTR),
+ 		   chunkInNAND));
+@@ -3465,7 +3534,7 @@ static int yaffs_ReadChunkDataFromObject
+ 
+ }
+ 
+-void yaffs_DeleteChunk(yaffs_Device * dev, int chunkId, int markNAND, int lyn)
++void yaffs_DeleteChunk(yaffs_Device *dev, int chunkId, int markNAND, int lyn)
+ {
+ 	int block;
+ 	int page;
+@@ -3475,16 +3544,15 @@ void yaffs_DeleteChunk(yaffs_Device * de
+ 	if (chunkId <= 0)
+ 		return;
+ 
+-
+ 	dev->nDeletions++;
+ 	block = chunkId / dev->nChunksPerBlock;
+ 	page = chunkId % dev->nChunksPerBlock;
+ 
+ 
+-	if(!yaffs_CheckChunkBit(dev,block,page))
++	if (!yaffs_CheckChunkBit(dev, block, page))
+ 		T(YAFFS_TRACE_VERIFY,
+-		 	(TSTR("Deleting invalid chunk %d"TENDSTR),
+-		 	 chunkId));
++			(TSTR("Deleting invalid chunk %d"TENDSTR),
++			 chunkId));
+ 
+ 	bi = yaffs_GetBlockInfo(dev, block);
+ 
+@@ -3524,14 +3592,12 @@ void yaffs_DeleteChunk(yaffs_Device * de
+ 			yaffs_BlockBecameDirty(dev, block);
+ 		}
+ 
+-	} else {
+-		/* T(("Bad news deleting chunk %d\n",chunkId)); */
+ 	}
+ 
+ }
+ 
+-static int yaffs_WriteChunkDataToObject(yaffs_Object * in, int chunkInInode,
+-					const __u8 * buffer, int nBytes,
++static int yaffs_WriteChunkDataToObject(yaffs_Object *in, int chunkInInode,
++					const __u8 *buffer, int nBytes,
+ 					int useReserve)
+ {
+ 	/* Find old chunk Need to do this to get serial number
+@@ -3561,6 +3627,12 @@ static int yaffs_WriteChunkDataToObject(
+ 	    (prevChunkId >= 0) ? prevTags.serialNumber + 1 : 1;
+ 	newTags.byteCount = nBytes;
+ 
++	if (nBytes < 1 || nBytes > dev->totalBytesPerChunk) {
++		T(YAFFS_TRACE_ERROR,
++		(TSTR("Writing %d bytes to chunk!!!!!!!!!" TENDSTR), nBytes));
++		YBUG();
++	}
++
+ 	newChunkId =
+ 	    yaffs_WriteNewChunkWithTagsToNAND(dev, buffer, &newTags,
+ 					      useReserve);
+@@ -3568,11 +3640,9 @@ static int yaffs_WriteChunkDataToObject(
+ 	if (newChunkId >= 0) {
+ 		yaffs_PutChunkIntoFile(in, chunkInInode, newChunkId, 0);
+ 
+-		if (prevChunkId >= 0) {
++		if (prevChunkId >= 0)
+ 			yaffs_DeleteChunk(dev, prevChunkId, 1, __LINE__);
+ 
+-		}
+-
+ 		yaffs_CheckFileSanity(in);
+ 	}
+ 	return newChunkId;
+@@ -3582,7 +3652,7 @@ static int yaffs_WriteChunkDataToObject(
+ /* UpdateObjectHeader updates the header on NAND for an object.
+  * If name is not NULL, then that new name is used.
+  */
+-int yaffs_UpdateObjectHeader(yaffs_Object * in, const YCHAR * name, int force,
++int yaffs_UpdateObjectHeader(yaffs_Object *in, const YCHAR *name, int force,
+ 			     int isShrink, int shadows)
+ {
+ 
+@@ -3603,9 +3673,12 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 
+ 	yaffs_ObjectHeader *oh = NULL;
+ 
+-	yaffs_strcpy(oldName,"silly old name");
++	yaffs_strcpy(oldName, _Y("silly old name"));
+ 
+-	if (!in->fake || force) {
++
++	if (!in->fake ||
++		in == dev->rootDir || /* The rootDir should also be saved */
++		force) {
+ 
+ 		yaffs_CheckGarbageCollection(dev);
+ 		yaffs_CheckObjectDetailsLoaded(in);
+@@ -3613,13 +3686,13 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 		buffer = yaffs_GetTempBuffer(in->myDev, __LINE__);
+ 		oh = (yaffs_ObjectHeader *) buffer;
+ 
+-		prevChunkId = in->chunkId;
++		prevChunkId = in->hdrChunk;
+ 
+-		if (prevChunkId >= 0) {
++		if (prevChunkId > 0) {
+ 			result = yaffs_ReadChunkWithTagsFromNAND(dev, prevChunkId,
+ 							buffer, &oldTags);
+ 
+-			yaffs_VerifyObjectHeader(in,oh,&oldTags,0);
++			yaffs_VerifyObjectHeader(in, oh, &oldTags, 0);
+ 
+ 			memcpy(oldName, oh->name, sizeof(oh->name));
+ 		}
+@@ -3628,7 +3701,7 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 
+ 		oh->type = in->variantType;
+ 		oh->yst_mode = in->yst_mode;
+-		oh->shadowsObject = shadows;
++		oh->shadowsObject = oh->inbandShadowsObject = shadows;
+ 
+ #ifdef CONFIG_YAFFS_WINCE
+ 		oh->win_atime[0] = in->win_atime[0];
+@@ -3645,20 +3718,18 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 		oh->yst_ctime = in->yst_ctime;
+ 		oh->yst_rdev = in->yst_rdev;
+ #endif
+-		if (in->parent) {
++		if (in->parent)
+ 			oh->parentObjectId = in->parent->objectId;
+-		} else {
++		else
+ 			oh->parentObjectId = 0;
+-		}
+ 
+ 		if (name && *name) {
+ 			memset(oh->name, 0, sizeof(oh->name));
+ 			yaffs_strncpy(oh->name, name, YAFFS_MAX_NAME_LENGTH);
+-		} else if (prevChunkId>=0) {
++		} else if (prevChunkId >= 0)
+ 			memcpy(oh->name, oldName, sizeof(oh->name));
+-		} else {
++		else
+ 			memset(oh->name, 0, sizeof(oh->name));
+-		}
+ 
+ 		oh->isShrink = isShrink;
+ 
+@@ -3708,7 +3779,7 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 		newTags.extraShadows = (oh->shadowsObject > 0) ? 1 : 0;
+ 		newTags.extraObjectType = in->variantType;
+ 
+-		yaffs_VerifyObjectHeader(in,oh,&newTags,1);
++		yaffs_VerifyObjectHeader(in, oh, &newTags, 1);
+ 
+ 		/* Create new chunk in NAND */
+ 		newChunkId =
+@@ -3717,20 +3788,20 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 
+ 		if (newChunkId >= 0) {
+ 
+-			in->chunkId = newChunkId;
++			in->hdrChunk = newChunkId;
+ 
+ 			if (prevChunkId >= 0) {
+ 				yaffs_DeleteChunk(dev, prevChunkId, 1,
+ 						  __LINE__);
+ 			}
+ 
+-			if(!yaffs_ObjectHasCachedWriteData(in))
++			if (!yaffs_ObjectHasCachedWriteData(in))
+ 				in->dirty = 0;
+ 
+ 			/* If this was a shrink, then mark the block that the chunk lives on */
+ 			if (isShrink) {
+ 				bi = yaffs_GetBlockInfo(in->myDev,
+-							newChunkId /in->myDev->	nChunksPerBlock);
++					newChunkId / in->myDev->nChunksPerBlock);
+ 				bi->hasShrinkHeader = 1;
+ 			}
+ 
+@@ -3766,7 +3837,7 @@ static int yaffs_ObjectHasCachedWriteDat
+ 	yaffs_ChunkCache *cache;
+ 	int nCaches = obj->myDev->nShortOpCaches;
+ 
+-	for(i = 0; i < nCaches; i++){
++	for (i = 0; i < nCaches; i++) {
+ 		cache = &dev->srCache[i];
+ 		if (cache->object == obj &&
+ 		    cache->dirty)
+@@ -3777,7 +3848,7 @@ static int yaffs_ObjectHasCachedWriteDat
+ }
+ 
+ 
+-static void yaffs_FlushFilesChunkCache(yaffs_Object * obj)
++static void yaffs_FlushFilesChunkCache(yaffs_Object *obj)
+ {
+ 	yaffs_Device *dev = obj->myDev;
+ 	int lowest = -99;	/* Stop compiler whining. */
+@@ -3844,16 +3915,16 @@ void yaffs_FlushEntireDeviceCache(yaffs_
+ 	 */
+ 	do {
+ 		obj = NULL;
+-		for( i = 0; i < nCaches && !obj; i++) {
++		for (i = 0; i < nCaches && !obj; i++) {
+ 			if (dev->srCache[i].object &&
+ 			    dev->srCache[i].dirty)
+ 				obj = dev->srCache[i].object;
+ 
+ 		}
+-		if(obj)
++		if (obj)
+ 			yaffs_FlushFilesChunkCache(obj);
+ 
+-	} while(obj);
++	} while (obj);
+ 
+ }
+ 
+@@ -3863,41 +3934,21 @@ void yaffs_FlushEntireDeviceCache(yaffs_
+  * Then look for the least recently used non-dirty one.
+  * Then look for the least recently used dirty one...., flush and look again.
+  */
+-static yaffs_ChunkCache *yaffs_GrabChunkCacheWorker(yaffs_Device * dev)
++static yaffs_ChunkCache *yaffs_GrabChunkCacheWorker(yaffs_Device *dev)
+ {
+ 	int i;
+-	int usage;
+-	int theOne;
+ 
+ 	if (dev->nShortOpCaches > 0) {
+ 		for (i = 0; i < dev->nShortOpCaches; i++) {
+ 			if (!dev->srCache[i].object)
+ 				return &dev->srCache[i];
+ 		}
++	}
+ 
+-		return NULL;
++	return NULL;
++}
+ 
+-		theOne = -1;
+-		usage = 0;	/* just to stop the compiler grizzling */
+-
+-		for (i = 0; i < dev->nShortOpCaches; i++) {
+-			if (!dev->srCache[i].dirty &&
+-			    ((dev->srCache[i].lastUse < usage && theOne >= 0) ||
+-			     theOne < 0)) {
+-				usage = dev->srCache[i].lastUse;
+-				theOne = i;
+-			}
+-		}
+-
+-
+-		return theOne >= 0 ? &dev->srCache[theOne] : NULL;
+-	} else {
+-		return NULL;
+-	}
+-
+-}
+-
+-static yaffs_ChunkCache *yaffs_GrabChunkCache(yaffs_Device * dev)
++static yaffs_ChunkCache *yaffs_GrabChunkCache(yaffs_Device *dev)
+ {
+ 	yaffs_ChunkCache *cache;
+ 	yaffs_Object *theObj;
+@@ -3927,8 +3978,7 @@ static yaffs_ChunkCache *yaffs_GrabChunk
+ 			for (i = 0; i < dev->nShortOpCaches; i++) {
+ 				if (dev->srCache[i].object &&
+ 				    !dev->srCache[i].locked &&
+-				    (dev->srCache[i].lastUse < usage || !cache))
+-				{
++				    (dev->srCache[i].lastUse < usage || !cache)) {
+ 					usage = dev->srCache[i].lastUse;
+ 					theObj = dev->srCache[i].object;
+ 					cache = &dev->srCache[i];
+@@ -3950,7 +4000,7 @@ static yaffs_ChunkCache *yaffs_GrabChunk
+ }
+ 
+ /* Find a cached chunk */
+-static yaffs_ChunkCache *yaffs_FindChunkCache(const yaffs_Object * obj,
++static yaffs_ChunkCache *yaffs_FindChunkCache(const yaffs_Object *obj,
+ 					      int chunkId)
+ {
+ 	yaffs_Device *dev = obj->myDev;
+@@ -3969,7 +4019,7 @@ static yaffs_ChunkCache *yaffs_FindChunk
+ }
+ 
+ /* Mark the chunk for the least recently used algorithym */
+-static void yaffs_UseChunkCache(yaffs_Device * dev, yaffs_ChunkCache * cache,
++static void yaffs_UseChunkCache(yaffs_Device *dev, yaffs_ChunkCache *cache,
+ 				int isAWrite)
+ {
+ 
+@@ -3977,9 +4027,9 @@ static void yaffs_UseChunkCache(yaffs_De
+ 		if (dev->srLastUse < 0 || dev->srLastUse > 100000000) {
+ 			/* Reset the cache usages */
+ 			int i;
+-			for (i = 1; i < dev->nShortOpCaches; i++) {
++			for (i = 1; i < dev->nShortOpCaches; i++)
+ 				dev->srCache[i].lastUse = 0;
+-			}
++
+ 			dev->srLastUse = 0;
+ 		}
+ 
+@@ -3987,9 +4037,8 @@ static void yaffs_UseChunkCache(yaffs_De
+ 
+ 		cache->lastUse = dev->srLastUse;
+ 
+-		if (isAWrite) {
++		if (isAWrite)
+ 			cache->dirty = 1;
+-		}
+ 	}
+ }
+ 
+@@ -3997,21 +4046,20 @@ static void yaffs_UseChunkCache(yaffs_De
+  * Do this when a whole page gets written,
+  * ie the short cache for this page is no longer valid.
+  */
+-static void yaffs_InvalidateChunkCache(yaffs_Object * object, int chunkId)
++static void yaffs_InvalidateChunkCache(yaffs_Object *object, int chunkId)
+ {
+ 	if (object->myDev->nShortOpCaches > 0) {
+ 		yaffs_ChunkCache *cache = yaffs_FindChunkCache(object, chunkId);
+ 
+-		if (cache) {
++		if (cache)
+ 			cache->object = NULL;
+-		}
+ 	}
+ }
+ 
+ /* Invalidate all the cache pages associated with this object
+  * Do this whenever ther file is deleted or resized.
+  */
+-static void yaffs_InvalidateWholeChunkCache(yaffs_Object * in)
++static void yaffs_InvalidateWholeChunkCache(yaffs_Object *in)
+ {
+ 	int i;
+ 	yaffs_Device *dev = in->myDev;
+@@ -4019,9 +4067,8 @@ static void yaffs_InvalidateWholeChunkCa
+ 	if (dev->nShortOpCaches > 0) {
+ 		/* Invalidate it. */
+ 		for (i = 0; i < dev->nShortOpCaches; i++) {
+-			if (dev->srCache[i].object == in) {
++			if (dev->srCache[i].object == in)
+ 				dev->srCache[i].object = NULL;
+-			}
+ 		}
+ 	}
+ }
+@@ -4029,18 +4076,18 @@ static void yaffs_InvalidateWholeChunkCa
+ /*--------------------- Checkpointing --------------------*/
+ 
+ 
+-static int yaffs_WriteCheckpointValidityMarker(yaffs_Device *dev,int head)
++static int yaffs_WriteCheckpointValidityMarker(yaffs_Device *dev, int head)
+ {
+ 	yaffs_CheckpointValidity cp;
+ 
+-	memset(&cp,0,sizeof(cp));
++	memset(&cp, 0, sizeof(cp));
+ 
+ 	cp.structType = sizeof(cp);
+ 	cp.magic = YAFFS_MAGIC;
+ 	cp.version = YAFFS_CHECKPOINT_VERSION;
+ 	cp.head = (head) ? 1 : 0;
+ 
+-	return (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp))?
++	return (yaffs_CheckpointWrite(dev, &cp, sizeof(cp)) == sizeof(cp)) ?
+ 		1 : 0;
+ }
+ 
+@@ -4049,9 +4096,9 @@ static int yaffs_ReadCheckpointValidityM
+ 	yaffs_CheckpointValidity cp;
+ 	int ok;
+ 
+-	ok = (yaffs_CheckpointRead(dev,&cp,sizeof(cp)) == sizeof(cp));
++	ok = (yaffs_CheckpointRead(dev, &cp, sizeof(cp)) == sizeof(cp));
+ 
+-	if(ok)
++	if (ok)
+ 		ok = (cp.structType == sizeof(cp)) &&
+ 		     (cp.magic == YAFFS_MAGIC) &&
+ 		     (cp.version == YAFFS_CHECKPOINT_VERSION) &&
+@@ -4100,21 +4147,21 @@ static int yaffs_WriteCheckpointDevice(y
+ 	int ok;
+ 
+ 	/* Write device runtime values*/
+-	yaffs_DeviceToCheckpointDevice(&cp,dev);
++	yaffs_DeviceToCheckpointDevice(&cp, dev);
+ 	cp.structType = sizeof(cp);
+ 
+-	ok = (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp));
++	ok = (yaffs_CheckpointWrite(dev, &cp, sizeof(cp)) == sizeof(cp));
+ 
+ 	/* Write block info */
+-	if(ok) {
++	if (ok) {
+ 		nBytes = nBlocks * sizeof(yaffs_BlockInfo);
+-		ok = (yaffs_CheckpointWrite(dev,dev->blockInfo,nBytes) == nBytes);
++		ok = (yaffs_CheckpointWrite(dev, dev->blockInfo, nBytes) == nBytes);
+ 	}
+ 
+ 	/* Write chunk bits */
+-	if(ok) {
++	if (ok) {
+ 		nBytes = nBlocks * dev->chunkBitmapStride;
+-		ok = (yaffs_CheckpointWrite(dev,dev->chunkBits,nBytes) == nBytes);
++		ok = (yaffs_CheckpointWrite(dev, dev->chunkBits, nBytes) == nBytes);
+ 	}
+ 	return	 ok ? 1 : 0;
+ 
+@@ -4128,25 +4175,25 @@ static int yaffs_ReadCheckpointDevice(ya
+ 
+ 	int ok;
+ 
+-	ok = (yaffs_CheckpointRead(dev,&cp,sizeof(cp)) == sizeof(cp));
+-	if(!ok)
++	ok = (yaffs_CheckpointRead(dev, &cp, sizeof(cp)) == sizeof(cp));
++	if (!ok)
+ 		return 0;
+ 
+-	if(cp.structType != sizeof(cp))
++	if (cp.structType != sizeof(cp))
+ 		return 0;
+ 
+ 
+-	yaffs_CheckpointDeviceToDevice(dev,&cp);
++	yaffs_CheckpointDeviceToDevice(dev, &cp);
+ 
+ 	nBytes = nBlocks * sizeof(yaffs_BlockInfo);
+ 
+-	ok = (yaffs_CheckpointRead(dev,dev->blockInfo,nBytes) == nBytes);
++	ok = (yaffs_CheckpointRead(dev, dev->blockInfo, nBytes) == nBytes);
+ 
+-	if(!ok)
++	if (!ok)
+ 		return 0;
+ 	nBytes = nBlocks * dev->chunkBitmapStride;
+ 
+-	ok = (yaffs_CheckpointRead(dev,dev->chunkBits,nBytes) == nBytes);
++	ok = (yaffs_CheckpointRead(dev, dev->chunkBits, nBytes) == nBytes);
+ 
+ 	return ok ? 1 : 0;
+ }
+@@ -4157,7 +4204,7 @@ static void yaffs_ObjectToCheckpointObje
+ 
+ 	cp->objectId = obj->objectId;
+ 	cp->parentId = (obj->parent) ? obj->parent->objectId : 0;
+-	cp->chunkId = obj->chunkId;
++	cp->hdrChunk = obj->hdrChunk;
+ 	cp->variantType = obj->variantType;
+ 	cp->deleted = obj->deleted;
+ 	cp->softDeleted = obj->softDeleted;
+@@ -4168,20 +4215,28 @@ static void yaffs_ObjectToCheckpointObje
+ 	cp->serial = obj->serial;
+ 	cp->nDataChunks = obj->nDataChunks;
+ 
+-	if(obj->variantType == YAFFS_OBJECT_TYPE_FILE)
++	if (obj->variantType == YAFFS_OBJECT_TYPE_FILE)
+ 		cp->fileSizeOrEquivalentObjectId = obj->variant.fileVariant.fileSize;
+-	else if(obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK)
++	else if (obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK)
+ 		cp->fileSizeOrEquivalentObjectId = obj->variant.hardLinkVariant.equivalentObjectId;
+ }
+ 
+-static void yaffs_CheckpointObjectToObject( yaffs_Object *obj,yaffs_CheckpointObject *cp)
++static int yaffs_CheckpointObjectToObject(yaffs_Object *obj, yaffs_CheckpointObject *cp)
+ {
+ 
+ 	yaffs_Object *parent;
+ 
++	if (obj->variantType != cp->variantType) {
++		T(YAFFS_TRACE_ERROR, (TSTR("Checkpoint read object %d type %d "
++			TCONT("chunk %d does not match existing object type %d")
++			TENDSTR), cp->objectId, cp->variantType, cp->hdrChunk,
++			obj->variantType));
++		return 0;
++	}
++
+ 	obj->objectId = cp->objectId;
+ 
+-	if(cp->parentId)
++	if (cp->parentId)
+ 		parent = yaffs_FindOrCreateObjectByNumber(
+ 					obj->myDev,
+ 					cp->parentId,
+@@ -4189,10 +4244,19 @@ static void yaffs_CheckpointObjectToObje
+ 	else
+ 		parent = NULL;
+ 
+-	if(parent)
++	if (parent) {
++		if (parent->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
++			T(YAFFS_TRACE_ALWAYS, (TSTR("Checkpoint read object %d parent %d type %d"
++				TCONT(" chunk %d Parent type, %d, not directory")
++				TENDSTR),
++				cp->objectId, cp->parentId, cp->variantType,
++				cp->hdrChunk, parent->variantType));
++			return 0;
++		}
+ 		yaffs_AddObjectToDirectory(parent, obj);
++	}
+ 
+-	obj->chunkId = cp->chunkId;
++	obj->hdrChunk = cp->hdrChunk;
+ 	obj->variantType = cp->variantType;
+ 	obj->deleted = cp->deleted;
+ 	obj->softDeleted = cp->softDeleted;
+@@ -4203,29 +4267,34 @@ static void yaffs_CheckpointObjectToObje
+ 	obj->serial = cp->serial;
+ 	obj->nDataChunks = cp->nDataChunks;
+ 
+-	if(obj->variantType == YAFFS_OBJECT_TYPE_FILE)
++	if (obj->variantType == YAFFS_OBJECT_TYPE_FILE)
+ 		obj->variant.fileVariant.fileSize = cp->fileSizeOrEquivalentObjectId;
+-	else if(obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK)
++	else if (obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK)
+ 		obj->variant.hardLinkVariant.equivalentObjectId = cp->fileSizeOrEquivalentObjectId;
+ 
+-	if(obj->objectId >= YAFFS_NOBJECT_BUCKETS)
++	if (obj->hdrChunk > 0)
+ 		obj->lazyLoaded = 1;
++	return 1;
+ }
+ 
+ 
+ 
+-static int yaffs_CheckpointTnodeWorker(yaffs_Object * in, yaffs_Tnode * tn,
+-				  	__u32 level, int chunkOffset)
++static int yaffs_CheckpointTnodeWorker(yaffs_Object *in, yaffs_Tnode *tn,
++					__u32 level, int chunkOffset)
+ {
+ 	int i;
+ 	yaffs_Device *dev = in->myDev;
+ 	int ok = 1;
+-	int nTnodeBytes = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
++	int tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
++
++	if (tnodeSize < sizeof(yaffs_Tnode))
++		tnodeSize = sizeof(yaffs_Tnode);
++
+ 
+ 	if (tn) {
+ 		if (level > 0) {
+ 
+-			for (i = 0; i < YAFFS_NTNODES_INTERNAL && ok; i++){
++			for (i = 0; i < YAFFS_NTNODES_INTERNAL && ok; i++) {
+ 				if (tn->internal[i]) {
+ 					ok = yaffs_CheckpointTnodeWorker(in,
+ 							tn->internal[i],
+@@ -4235,10 +4304,9 @@ static int yaffs_CheckpointTnodeWorker(y
+ 			}
+ 		} else if (level == 0) {
+ 			__u32 baseOffset = chunkOffset <<  YAFFS_TNODES_LEVEL0_BITS;
+-			/* printf("write tnode at %d\n",baseOffset); */
+-			ok = (yaffs_CheckpointWrite(dev,&baseOffset,sizeof(baseOffset)) == sizeof(baseOffset));
+-			if(ok)
+-				ok = (yaffs_CheckpointWrite(dev,tn,nTnodeBytes) == nTnodeBytes);
++			ok = (yaffs_CheckpointWrite(dev, &baseOffset, sizeof(baseOffset)) == sizeof(baseOffset));
++			if (ok)
++				ok = (yaffs_CheckpointWrite(dev, tn, tnodeSize) == tnodeSize);
+ 		}
+ 	}
+ 
+@@ -4251,13 +4319,13 @@ static int yaffs_WriteCheckpointTnodes(y
+ 	__u32 endMarker = ~0;
+ 	int ok = 1;
+ 
+-	if(obj->variantType == YAFFS_OBJECT_TYPE_FILE){
++	if (obj->variantType == YAFFS_OBJECT_TYPE_FILE) {
+ 		ok = yaffs_CheckpointTnodeWorker(obj,
+ 					    obj->variant.fileVariant.top,
+ 					    obj->variant.fileVariant.topLevel,
+ 					    0);
+-		if(ok)
+-			ok = (yaffs_CheckpointWrite(obj->myDev,&endMarker,sizeof(endMarker)) ==
++		if (ok)
++			ok = (yaffs_CheckpointWrite(obj->myDev, &endMarker, sizeof(endMarker)) ==
+ 				sizeof(endMarker));
+ 	}
+ 
+@@ -4272,38 +4340,38 @@ static int yaffs_ReadCheckpointTnodes(ya
+ 	yaffs_FileStructure *fileStructPtr = &obj->variant.fileVariant;
+ 	yaffs_Tnode *tn;
+ 	int nread = 0;
++	int tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
+ 
+-	ok = (yaffs_CheckpointRead(dev,&baseChunk,sizeof(baseChunk)) == sizeof(baseChunk));
++	if (tnodeSize < sizeof(yaffs_Tnode))
++		tnodeSize = sizeof(yaffs_Tnode);
+ 
+-	while(ok && (~baseChunk)){
++	ok = (yaffs_CheckpointRead(dev, &baseChunk, sizeof(baseChunk)) == sizeof(baseChunk));
++
++	while (ok && (~baseChunk)) {
+ 		nread++;
+ 		/* Read level 0 tnode */
+ 
+ 
+-		/* printf("read  tnode at %d\n",baseChunk); */
+ 		tn = yaffs_GetTnodeRaw(dev);
+-		if(tn)
+-			ok = (yaffs_CheckpointRead(dev,tn,(dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8) ==
+-			      (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8);
++		if (tn)
++			ok = (yaffs_CheckpointRead(dev, tn, tnodeSize) == tnodeSize);
+ 		else
+ 			ok = 0;
+ 
+-		if(tn && ok){
++		if (tn && ok)
+ 			ok = yaffs_AddOrFindLevel0Tnode(dev,
+-					       		fileStructPtr,
+-					       		baseChunk,
+-					       		tn) ? 1 : 0;
++							fileStructPtr,
++							baseChunk,
++							tn) ? 1 : 0;
+ 
+-		}
+-
+-		if(ok)
+-			ok = (yaffs_CheckpointRead(dev,&baseChunk,sizeof(baseChunk)) == sizeof(baseChunk));
++		if (ok)
++			ok = (yaffs_CheckpointRead(dev, &baseChunk, sizeof(baseChunk)) == sizeof(baseChunk));
+ 
+ 	}
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(
++	T(YAFFS_TRACE_CHECKPOINT, (
+ 		TSTR("Checkpoint read tnodes %d records, last %d. ok %d" TENDSTR),
+-		nread,baseChunk,ok));
++		nread, baseChunk, ok));
+ 
+ 	return ok ? 1 : 0;
+ }
+@@ -4315,41 +4383,40 @@ static int yaffs_WriteCheckpointObjects(
+ 	yaffs_CheckpointObject cp;
+ 	int i;
+ 	int ok = 1;
+-	struct list_head *lh;
++	struct ylist_head *lh;
+ 
+ 
+ 	/* Iterate through the objects in each hash entry,
+ 	 * dumping them to the checkpointing stream.
+ 	 */
+ 
+-	 for(i = 0; ok &&  i <  YAFFS_NOBJECT_BUCKETS; i++){
+-	 	list_for_each(lh, &dev->objectBucket[i].list) {
++	for (i = 0; ok &&  i <  YAFFS_NOBJECT_BUCKETS; i++) {
++		ylist_for_each(lh, &dev->objectBucket[i].list) {
+ 			if (lh) {
+-				obj = list_entry(lh, yaffs_Object, hashLink);
++				obj = ylist_entry(lh, yaffs_Object, hashLink);
+ 				if (!obj->deferedFree) {
+-					yaffs_ObjectToCheckpointObject(&cp,obj);
++					yaffs_ObjectToCheckpointObject(&cp, obj);
+ 					cp.structType = sizeof(cp);
+ 
+-					T(YAFFS_TRACE_CHECKPOINT,(
++					T(YAFFS_TRACE_CHECKPOINT, (
+ 						TSTR("Checkpoint write object %d parent %d type %d chunk %d obj addr %x" TENDSTR),
+-						cp.objectId,cp.parentId,cp.variantType,cp.chunkId,(unsigned) obj));
++						cp.objectId, cp.parentId, cp.variantType, cp.hdrChunk, (unsigned) obj));
+ 
+-					ok = (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp));
++					ok = (yaffs_CheckpointWrite(dev, &cp, sizeof(cp)) == sizeof(cp));
+ 
+-					if(ok && obj->variantType == YAFFS_OBJECT_TYPE_FILE){
++					if (ok && obj->variantType == YAFFS_OBJECT_TYPE_FILE)
+ 						ok = yaffs_WriteCheckpointTnodes(obj);
+-					}
+ 				}
+ 			}
+ 		}
+-	 }
++	}
+ 
+-	 /* Dump end of list */
+-	memset(&cp,0xFF,sizeof(yaffs_CheckpointObject));
++	/* Dump end of list */
++	memset(&cp, 0xFF, sizeof(yaffs_CheckpointObject));
+ 	cp.structType = sizeof(cp);
+ 
+-	if(ok)
+-		ok = (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp));
++	if (ok)
++		ok = (yaffs_CheckpointWrite(dev, &cp, sizeof(cp)) == sizeof(cp));
+ 
+ 	return ok ? 1 : 0;
+ }
+@@ -4362,38 +4429,39 @@ static int yaffs_ReadCheckpointObjects(y
+ 	int done = 0;
+ 	yaffs_Object *hardList = NULL;
+ 
+-	while(ok && !done) {
+-		ok = (yaffs_CheckpointRead(dev,&cp,sizeof(cp)) == sizeof(cp));
+-		if(cp.structType != sizeof(cp)) {
+-			T(YAFFS_TRACE_CHECKPOINT,(TSTR("struct size %d instead of %d ok %d"TENDSTR),
+-				cp.structType,sizeof(cp),ok));
++	while (ok && !done) {
++		ok = (yaffs_CheckpointRead(dev, &cp, sizeof(cp)) == sizeof(cp));
++		if (cp.structType != sizeof(cp)) {
++			T(YAFFS_TRACE_CHECKPOINT, (TSTR("struct size %d instead of %d ok %d"TENDSTR),
++				cp.structType, sizeof(cp), ok));
+ 			ok = 0;
+ 		}
+ 
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("Checkpoint read object %d parent %d type %d chunk %d " TENDSTR),
+-			cp.objectId,cp.parentId,cp.variantType,cp.chunkId));
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("Checkpoint read object %d parent %d type %d chunk %d " TENDSTR),
++			cp.objectId, cp.parentId, cp.variantType, cp.hdrChunk));
+ 
+-		if(ok && cp.objectId == ~0)
++		if (ok && cp.objectId == ~0)
+ 			done = 1;
+-		else if(ok){
+-			obj = yaffs_FindOrCreateObjectByNumber(dev,cp.objectId, cp.variantType);
+-			if(obj) {
+-				yaffs_CheckpointObjectToObject(obj,&cp);
+-				if(obj->variantType == YAFFS_OBJECT_TYPE_FILE) {
++		else if (ok) {
++			obj = yaffs_FindOrCreateObjectByNumber(dev, cp.objectId, cp.variantType);
++			if (obj) {
++				ok = yaffs_CheckpointObjectToObject(obj, &cp);
++				if (!ok)
++					break;
++				if (obj->variantType == YAFFS_OBJECT_TYPE_FILE) {
+ 					ok = yaffs_ReadCheckpointTnodes(obj);
+-				} else if(obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) {
++				} else if (obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) {
+ 					obj->hardLinks.next =
+-						    (struct list_head *)
+-						    hardList;
++						(struct ylist_head *) hardList;
+ 					hardList = obj;
+ 				}
+-
+-			}
++			} else
++				ok = 0;
+ 		}
+ 	}
+ 
+-	if(ok)
+-		yaffs_HardlinkFixup(dev,hardList);
++	if (ok)
++		yaffs_HardlinkFixup(dev, hardList);
+ 
+ 	return ok ? 1 : 0;
+ }
+@@ -4403,11 +4471,11 @@ static int yaffs_WriteCheckpointSum(yaff
+ 	__u32 checkpointSum;
+ 	int ok;
+ 
+-	yaffs_GetCheckpointSum(dev,&checkpointSum);
++	yaffs_GetCheckpointSum(dev, &checkpointSum);
+ 
+-	ok = (yaffs_CheckpointWrite(dev,&checkpointSum,sizeof(checkpointSum)) == sizeof(checkpointSum));
++	ok = (yaffs_CheckpointWrite(dev, &checkpointSum, sizeof(checkpointSum)) == sizeof(checkpointSum));
+ 
+-	if(!ok)
++	if (!ok)
+ 		return 0;
+ 
+ 	return 1;
+@@ -4419,14 +4487,14 @@ static int yaffs_ReadCheckpointSum(yaffs
+ 	__u32 checkpointSum1;
+ 	int ok;
+ 
+-	yaffs_GetCheckpointSum(dev,&checkpointSum0);
++	yaffs_GetCheckpointSum(dev, &checkpointSum0);
+ 
+-	ok = (yaffs_CheckpointRead(dev,&checkpointSum1,sizeof(checkpointSum1)) == sizeof(checkpointSum1));
++	ok = (yaffs_CheckpointRead(dev, &checkpointSum1, sizeof(checkpointSum1)) == sizeof(checkpointSum1));
+ 
+-	if(!ok)
++	if (!ok)
+ 		return 0;
+ 
+-	if(checkpointSum0 != checkpointSum1)
++	if (checkpointSum0 != checkpointSum1)
+ 		return 0;
+ 
+ 	return 1;
+@@ -4435,46 +4503,43 @@ static int yaffs_ReadCheckpointSum(yaffs
+ 
+ static int yaffs_WriteCheckpointData(yaffs_Device *dev)
+ {
+-
+ 	int ok = 1;
+ 
+-	if(dev->skipCheckpointWrite || !dev->isYaffs2){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("skipping checkpoint write" TENDSTR)));
++	if (dev->skipCheckpointWrite || !dev->isYaffs2) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("skipping checkpoint write" TENDSTR)));
+ 		ok = 0;
+ 	}
+ 
+-	if(ok)
+-		ok = yaffs_CheckpointOpen(dev,1);
++	if (ok)
++		ok = yaffs_CheckpointOpen(dev, 1);
+ 
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint validity" TENDSTR)));
+-		ok = yaffs_WriteCheckpointValidityMarker(dev,1);
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("write checkpoint validity" TENDSTR)));
++		ok = yaffs_WriteCheckpointValidityMarker(dev, 1);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint device" TENDSTR)));
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("write checkpoint device" TENDSTR)));
+ 		ok = yaffs_WriteCheckpointDevice(dev);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint objects" TENDSTR)));
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("write checkpoint objects" TENDSTR)));
+ 		ok = yaffs_WriteCheckpointObjects(dev);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint validity" TENDSTR)));
+-		ok = yaffs_WriteCheckpointValidityMarker(dev,0);
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("write checkpoint validity" TENDSTR)));
++		ok = yaffs_WriteCheckpointValidityMarker(dev, 0);
+ 	}
+ 
+-	if(ok){
++	if (ok)
+ 		ok = yaffs_WriteCheckpointSum(dev);
+-	}
+-
+ 
+-	if(!yaffs_CheckpointClose(dev))
+-		 ok = 0;
++	if (!yaffs_CheckpointClose(dev))
++		ok = 0;
+ 
+-	if(ok)
+-	    	dev->isCheckpointed = 1;
+-	 else
+-	 	dev->isCheckpointed = 0;
++	if (ok)
++		dev->isCheckpointed = 1;
++	else
++		dev->isCheckpointed = 0;
+ 
+ 	return dev->isCheckpointed;
+ }
+@@ -4483,43 +4548,43 @@ static int yaffs_ReadCheckpointData(yaff
+ {
+ 	int ok = 1;
+ 
+-	if(dev->skipCheckpointRead || !dev->isYaffs2){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("skipping checkpoint read" TENDSTR)));
++	if (dev->skipCheckpointRead || !dev->isYaffs2) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("skipping checkpoint read" TENDSTR)));
+ 		ok = 0;
+ 	}
+ 
+-	if(ok)
+-		ok = yaffs_CheckpointOpen(dev,0); /* open for read */
++	if (ok)
++		ok = yaffs_CheckpointOpen(dev, 0); /* open for read */
+ 
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint validity" TENDSTR)));
+-		ok = yaffs_ReadCheckpointValidityMarker(dev,1);
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("read checkpoint validity" TENDSTR)));
++		ok = yaffs_ReadCheckpointValidityMarker(dev, 1);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint device" TENDSTR)));
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("read checkpoint device" TENDSTR)));
+ 		ok = yaffs_ReadCheckpointDevice(dev);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint objects" TENDSTR)));
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("read checkpoint objects" TENDSTR)));
+ 		ok = yaffs_ReadCheckpointObjects(dev);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint validity" TENDSTR)));
+-		ok = yaffs_ReadCheckpointValidityMarker(dev,0);
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("read checkpoint validity" TENDSTR)));
++		ok = yaffs_ReadCheckpointValidityMarker(dev, 0);
+ 	}
+ 
+-	if(ok){
++	if (ok) {
+ 		ok = yaffs_ReadCheckpointSum(dev);
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint checksum %d" TENDSTR),ok));
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("read checkpoint checksum %d" TENDSTR), ok));
+ 	}
+ 
+-	if(!yaffs_CheckpointClose(dev))
++	if (!yaffs_CheckpointClose(dev))
+ 		ok = 0;
+ 
+-	if(ok)
+-	    	dev->isCheckpointed = 1;
+-	 else
+-	 	dev->isCheckpointed = 0;
++	if (ok)
++		dev->isCheckpointed = 1;
++	else
++		dev->isCheckpointed = 0;
+ 
+ 	return ok ? 1 : 0;
+ 
+@@ -4527,11 +4592,11 @@ static int yaffs_ReadCheckpointData(yaff
+ 
+ static void yaffs_InvalidateCheckpoint(yaffs_Device *dev)
+ {
+-	if(dev->isCheckpointed ||
+-	   dev->blocksInCheckpoint > 0){
++	if (dev->isCheckpointed ||
++			dev->blocksInCheckpoint > 0) {
+ 		dev->isCheckpointed = 0;
+ 		yaffs_CheckpointInvalidateStream(dev);
+-		if(dev->superBlock && dev->markSuperBlockDirty)
++		if (dev->superBlock && dev->markSuperBlockDirty)
+ 			dev->markSuperBlockDirty(dev->superBlock);
+ 	}
+ }
+@@ -4540,18 +4605,18 @@ static void yaffs_InvalidateCheckpoint(y
+ int yaffs_CheckpointSave(yaffs_Device *dev)
+ {
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("save entry: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("save entry: isCheckpointed %d"TENDSTR), dev->isCheckpointed));
+ 
+ 	yaffs_VerifyObjects(dev);
+ 	yaffs_VerifyBlocks(dev);
+ 	yaffs_VerifyFreeChunks(dev);
+ 
+-	if(!dev->isCheckpointed) {
++	if (!dev->isCheckpointed) {
+ 		yaffs_InvalidateCheckpoint(dev);
+ 		yaffs_WriteCheckpointData(dev);
+ 	}
+ 
+-	T(YAFFS_TRACE_ALWAYS,(TSTR("save exit: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
++	T(YAFFS_TRACE_ALWAYS, (TSTR("save exit: isCheckpointed %d"TENDSTR), dev->isCheckpointed));
+ 
+ 	return dev->isCheckpointed;
+ }
+@@ -4559,17 +4624,17 @@ int yaffs_CheckpointSave(yaffs_Device *d
+ int yaffs_CheckpointRestore(yaffs_Device *dev)
+ {
+ 	int retval;
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("restore entry: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("restore entry: isCheckpointed %d"TENDSTR), dev->isCheckpointed));
+ 
+ 	retval = yaffs_ReadCheckpointData(dev);
+ 
+-	if(dev->isCheckpointed){
++	if (dev->isCheckpointed) {
+ 		yaffs_VerifyObjects(dev);
+ 		yaffs_VerifyBlocks(dev);
+ 		yaffs_VerifyFreeChunks(dev);
+ 	}
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("restore exit: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("restore exit: isCheckpointed %d"TENDSTR), dev->isCheckpointed));
+ 
+ 	return retval;
+ }
+@@ -4584,12 +4649,12 @@ int yaffs_CheckpointRestore(yaffs_Device
+  * Curve-balls: the first chunk might also be the last chunk.
+  */
+ 
+-int yaffs_ReadDataFromFile(yaffs_Object * in, __u8 * buffer, loff_t offset,
+-			   int nBytes)
++int yaffs_ReadDataFromFile(yaffs_Object *in, __u8 *buffer, loff_t offset,
++			int nBytes)
+ {
+ 
+ 	int chunk;
+-	int start;
++	__u32 start;
+ 	int nToCopy;
+ 	int n = nBytes;
+ 	int nDone = 0;
+@@ -4600,27 +4665,26 @@ int yaffs_ReadDataFromFile(yaffs_Object 
+ 	dev = in->myDev;
+ 
+ 	while (n > 0) {
+-		//chunk = offset / dev->nDataBytesPerChunk + 1;
+-		//start = offset % dev->nDataBytesPerChunk;
+-		yaffs_AddrToChunk(dev,offset,&chunk,&start);
++		/* chunk = offset / dev->nDataBytesPerChunk + 1; */
++		/* start = offset % dev->nDataBytesPerChunk; */
++		yaffs_AddrToChunk(dev, offset, &chunk, &start);
+ 		chunk++;
+ 
+ 		/* OK now check for the curveball where the start and end are in
+ 		 * the same chunk.
+ 		 */
+-		if ((start + n) < dev->nDataBytesPerChunk) {
++		if ((start + n) < dev->nDataBytesPerChunk)
+ 			nToCopy = n;
+-		} else {
++		else
+ 			nToCopy = dev->nDataBytesPerChunk - start;
+-		}
+ 
+ 		cache = yaffs_FindChunkCache(in, chunk);
+ 
+ 		/* If the chunk is already in the cache or it is less than a whole chunk
+-		 * then use the cache (if there is caching)
++		 * or we're using inband tags then use the cache (if there is caching)
+ 		 * else bypass the cache.
+ 		 */
+-		if (cache || nToCopy != dev->nDataBytesPerChunk) {
++		if (cache || nToCopy != dev->nDataBytesPerChunk || dev->inbandTags) {
+ 			if (dev->nShortOpCaches > 0) {
+ 
+ 				/* If we can't find the data in the cache, then load it up. */
+@@ -4641,14 +4705,9 @@ int yaffs_ReadDataFromFile(yaffs_Object 
+ 
+ 				cache->locked = 1;
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_UnlockYAFFS(TRUE);
+-#endif
++
+ 				memcpy(buffer, &cache->data[start], nToCopy);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_LockYAFFS(TRUE);
+-#endif
+ 				cache->locked = 0;
+ 			} else {
+ 				/* Read into the local buffer then copy..*/
+@@ -4657,41 +4716,19 @@ int yaffs_ReadDataFromFile(yaffs_Object 
+ 				    yaffs_GetTempBuffer(dev, __LINE__);
+ 				yaffs_ReadChunkDataFromObject(in, chunk,
+ 							      localBuffer);
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_UnlockYAFFS(TRUE);
+-#endif
++
+ 				memcpy(buffer, &localBuffer[start], nToCopy);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_LockYAFFS(TRUE);
+-#endif
++
+ 				yaffs_ReleaseTempBuffer(dev, localBuffer,
+ 							__LINE__);
+ 			}
+ 
+ 		} else {
+-#ifdef CONFIG_YAFFS_WINCE
+-			__u8 *localBuffer = yaffs_GetTempBuffer(dev, __LINE__);
+-
+-			/* Under WinCE can't do direct transfer. Need to use a local buffer.
+-			 * This is because we otherwise screw up WinCE's memory mapper
+-			 */
+-			yaffs_ReadChunkDataFromObject(in, chunk, localBuffer);
+-
+-#ifdef CONFIG_YAFFS_WINCE
+-			yfsd_UnlockYAFFS(TRUE);
+-#endif
+-			memcpy(buffer, localBuffer, dev->nDataBytesPerChunk);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-			yfsd_LockYAFFS(TRUE);
+-			yaffs_ReleaseTempBuffer(dev, localBuffer, __LINE__);
+-#endif
+-
+-#else
+ 			/* A full chunk. Read directly into the supplied buffer. */
+ 			yaffs_ReadChunkDataFromObject(in, chunk, buffer);
+-#endif
++
+ 		}
+ 
+ 		n -= nToCopy;
+@@ -4704,28 +4741,37 @@ int yaffs_ReadDataFromFile(yaffs_Object 
+ 	return nDone;
+ }
+ 
+-int yaffs_WriteDataToFile(yaffs_Object * in, const __u8 * buffer, loff_t offset,
+-			  int nBytes, int writeThrough)
++int yaffs_WriteDataToFile(yaffs_Object *in, const __u8 *buffer, loff_t offset,
++			int nBytes, int writeThrough)
+ {
+ 
+ 	int chunk;
+-	int start;
++	__u32 start;
+ 	int nToCopy;
+ 	int n = nBytes;
+ 	int nDone = 0;
+ 	int nToWriteBack;
+ 	int startOfWrite = offset;
+ 	int chunkWritten = 0;
+-	int nBytesRead;
++	__u32 nBytesRead;
++	__u32 chunkStart;
+ 
+ 	yaffs_Device *dev;
+ 
+ 	dev = in->myDev;
+ 
+ 	while (n > 0 && chunkWritten >= 0) {
+-		//chunk = offset / dev->nDataBytesPerChunk + 1;
+-		//start = offset % dev->nDataBytesPerChunk;
+-		yaffs_AddrToChunk(dev,offset,&chunk,&start);
++		/* chunk = offset / dev->nDataBytesPerChunk + 1; */
++		/* start = offset % dev->nDataBytesPerChunk; */
++		yaffs_AddrToChunk(dev, offset, &chunk, &start);
++
++		if (chunk * dev->nDataBytesPerChunk + start != offset ||
++				start >= dev->nDataBytesPerChunk) {
++			T(YAFFS_TRACE_ERROR, (
++			   TSTR("AddrToChunk of offset %d gives chunk %d start %d"
++			   TENDSTR),
++			   (int)offset, chunk, start));
++		}
+ 		chunk++;
+ 
+ 		/* OK now check for the curveball where the start and end are in
+@@ -4740,25 +4786,32 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 			 * we need to write back as much as was there before.
+ 			 */
+ 
+-			nBytesRead =
+-			    in->variant.fileVariant.fileSize -
+-			    ((chunk - 1) * dev->nDataBytesPerChunk);
++			chunkStart = ((chunk - 1) * dev->nDataBytesPerChunk);
++
++			if (chunkStart > in->variant.fileVariant.fileSize)
++				nBytesRead = 0; /* Past end of file */
++			else
++				nBytesRead = in->variant.fileVariant.fileSize - chunkStart;
+ 
+-			if (nBytesRead > dev->nDataBytesPerChunk) {
++			if (nBytesRead > dev->nDataBytesPerChunk)
+ 				nBytesRead = dev->nDataBytesPerChunk;
+-			}
+ 
+ 			nToWriteBack =
+ 			    (nBytesRead >
+ 			     (start + n)) ? nBytesRead : (start + n);
+ 
++			if (nToWriteBack < 0 || nToWriteBack > dev->nDataBytesPerChunk)
++				YBUG();
++
+ 		} else {
+ 			nToCopy = dev->nDataBytesPerChunk - start;
+ 			nToWriteBack = dev->nDataBytesPerChunk;
+ 		}
+ 
+-		if (nToCopy != dev->nDataBytesPerChunk) {
+-			/* An incomplete start or end chunk (or maybe both start and end chunk) */
++		if (nToCopy != dev->nDataBytesPerChunk || dev->inbandTags) {
++			/* An incomplete start or end chunk (or maybe both start and end chunk),
++			 * or we're using inband tags, so we want to use the cache buffers.
++			 */
+ 			if (dev->nShortOpCaches > 0) {
+ 				yaffs_ChunkCache *cache;
+ 				/* If we can't find the data in the cache, then load the cache */
+@@ -4775,10 +4828,9 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 					yaffs_ReadChunkDataFromObject(in, chunk,
+ 								      cache->
+ 								      data);
+-				}
+-				else if(cache &&
+-				        !cache->dirty &&
+-					!yaffs_CheckSpaceForAllocation(in->myDev)){
++				} else if (cache &&
++					!cache->dirty &&
++					!yaffs_CheckSpaceForAllocation(in->myDev)) {
+ 					/* Drop the cache if it was a read cache item and
+ 					 * no space check has been made for it.
+ 					 */
+@@ -4788,16 +4840,12 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 				if (cache) {
+ 					yaffs_UseChunkCache(dev, cache, 1);
+ 					cache->locked = 1;
+-#ifdef CONFIG_YAFFS_WINCE
+-					yfsd_UnlockYAFFS(TRUE);
+-#endif
++
+ 
+ 					memcpy(&cache->data[start], buffer,
+ 					       nToCopy);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-					yfsd_LockYAFFS(TRUE);
+-#endif
++
+ 					cache->locked = 0;
+ 					cache->nBytes = nToWriteBack;
+ 
+@@ -4825,15 +4873,10 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 				yaffs_ReadChunkDataFromObject(in, chunk,
+ 							      localBuffer);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_UnlockYAFFS(TRUE);
+-#endif
++
+ 
+ 				memcpy(&localBuffer[start], buffer, nToCopy);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_LockYAFFS(TRUE);
+-#endif
+ 				chunkWritten =
+ 				    yaffs_WriteChunkDataToObject(in, chunk,
+ 								 localBuffer,
+@@ -4846,31 +4889,15 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 			}
+ 
+ 		} else {
+-
+-#ifdef CONFIG_YAFFS_WINCE
+-			/* Under WinCE can't do direct transfer. Need to use a local buffer.
+-			 * This is because we otherwise screw up WinCE's memory mapper
+-			 */
+-			__u8 *localBuffer = yaffs_GetTempBuffer(dev, __LINE__);
+-#ifdef CONFIG_YAFFS_WINCE
+-			yfsd_UnlockYAFFS(TRUE);
+-#endif
+-			memcpy(localBuffer, buffer, dev->nDataBytesPerChunk);
+-#ifdef CONFIG_YAFFS_WINCE
+-			yfsd_LockYAFFS(TRUE);
+-#endif
+-			chunkWritten =
+-			    yaffs_WriteChunkDataToObject(in, chunk, localBuffer,
+-							 dev->nDataBytesPerChunk,
+-							 0);
+-			yaffs_ReleaseTempBuffer(dev, localBuffer, __LINE__);
+-#else
+ 			/* A full chunk. Write directly from the supplied buffer. */
++
++
++
+ 			chunkWritten =
+ 			    yaffs_WriteChunkDataToObject(in, chunk, buffer,
+ 							 dev->nDataBytesPerChunk,
+ 							 0);
+-#endif
++
+ 			/* Since we've overwritten the cached data, we better invalidate it. */
+ 			yaffs_InvalidateChunkCache(in, chunk);
+ 		}
+@@ -4886,9 +4913,8 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 
+ 	/* Update file object */
+ 
+-	if ((startOfWrite + nDone) > in->variant.fileVariant.fileSize) {
++	if ((startOfWrite + nDone) > in->variant.fileVariant.fileSize)
+ 		in->variant.fileVariant.fileSize = (startOfWrite + nDone);
+-	}
+ 
+ 	in->dirty = 1;
+ 
+@@ -4898,7 +4924,7 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 
+ /* ---------------------- File resizing stuff ------------------ */
+ 
+-static void yaffs_PruneResizedChunks(yaffs_Object * in, int newSize)
++static void yaffs_PruneResizedChunks(yaffs_Object *in, int newSize)
+ {
+ 
+ 	yaffs_Device *dev = in->myDev;
+@@ -4939,11 +4965,11 @@ static void yaffs_PruneResizedChunks(yaf
+ 
+ }
+ 
+-int yaffs_ResizeFile(yaffs_Object * in, loff_t newSize)
++int yaffs_ResizeFile(yaffs_Object *in, loff_t newSize)
+ {
+ 
+ 	int oldFileSize = in->variant.fileVariant.fileSize;
+-	int newSizeOfPartialChunk;
++	__u32 newSizeOfPartialChunk;
+ 	int newFullChunks;
+ 
+ 	yaffs_Device *dev = in->myDev;
+@@ -4955,13 +4981,11 @@ int yaffs_ResizeFile(yaffs_Object * in, 
+ 
+ 	yaffs_CheckGarbageCollection(dev);
+ 
+-	if (in->variantType != YAFFS_OBJECT_TYPE_FILE) {
+-		return yaffs_GetFileSize(in);
+-	}
++	if (in->variantType != YAFFS_OBJECT_TYPE_FILE)
++		return YAFFS_FAIL;
+ 
+-	if (newSize == oldFileSize) {
+-		return oldFileSize;
+-	}
++	if (newSize == oldFileSize)
++		return YAFFS_OK;
+ 
+ 	if (newSize < oldFileSize) {
+ 
+@@ -4994,21 +5018,20 @@ int yaffs_ResizeFile(yaffs_Object * in, 
+ 	}
+ 
+ 
+-
+ 	/* Write a new object header.
+ 	 * show we've shrunk the file, if need be
+ 	 * Do this only if the file is not in the deleted directories.
+ 	 */
+-	if (in->parent->objectId != YAFFS_OBJECTID_UNLINKED &&
+-	    in->parent->objectId != YAFFS_OBJECTID_DELETED) {
++	if (in->parent &&
++	    in->parent->objectId != YAFFS_OBJECTID_UNLINKED &&
++	    in->parent->objectId != YAFFS_OBJECTID_DELETED)
+ 		yaffs_UpdateObjectHeader(in, NULL, 0,
+ 					 (newSize < oldFileSize) ? 1 : 0, 0);
+-	}
+ 
+-	return newSize;
++	return YAFFS_OK;
+ }
+ 
+-loff_t yaffs_GetFileSize(yaffs_Object * obj)
++loff_t yaffs_GetFileSize(yaffs_Object *obj)
+ {
+ 	obj = yaffs_GetEquivalentObject(obj);
+ 
+@@ -5024,7 +5047,7 @@ loff_t yaffs_GetFileSize(yaffs_Object * 
+ 
+ 
+ 
+-int yaffs_FlushFile(yaffs_Object * in, int updateTime)
++int yaffs_FlushFile(yaffs_Object *in, int updateTime)
+ {
+ 	int retVal;
+ 	if (in->dirty) {
+@@ -5039,9 +5062,8 @@ int yaffs_FlushFile(yaffs_Object * in, i
+ #endif
+ 		}
+ 
+-		retVal =
+-		    (yaffs_UpdateObjectHeader(in, NULL, 0, 0, 0) >=
+-		     0) ? YAFFS_OK : YAFFS_FAIL;
++		retVal = (yaffs_UpdateObjectHeader(in, NULL, 0, 0, 0) >=
++			0) ? YAFFS_OK : YAFFS_FAIL;
+ 	} else {
+ 		retVal = YAFFS_OK;
+ 	}
+@@ -5050,7 +5072,7 @@ int yaffs_FlushFile(yaffs_Object * in, i
+ 
+ }
+ 
+-static int yaffs_DoGenericObjectDeletion(yaffs_Object * in)
++static int yaffs_DoGenericObjectDeletion(yaffs_Object *in)
+ {
+ 
+ 	/* First off, invalidate the file's data in the cache, without flushing. */
+@@ -5058,13 +5080,13 @@ static int yaffs_DoGenericObjectDeletion
+ 
+ 	if (in->myDev->isYaffs2 && (in->parent != in->myDev->deletedDir)) {
+ 		/* Move to the unlinked directory so we have a record that it was deleted. */
+-		yaffs_ChangeObjectName(in, in->myDev->deletedDir,"deleted", 0, 0);
++		yaffs_ChangeObjectName(in, in->myDev->deletedDir, _Y("deleted"), 0, 0);
+ 
+ 	}
+ 
+ 	yaffs_RemoveObjectFromDirectory(in);
+-	yaffs_DeleteChunk(in->myDev, in->chunkId, 1, __LINE__);
+-	in->chunkId = -1;
++	yaffs_DeleteChunk(in->myDev, in->hdrChunk, 1, __LINE__);
++	in->hdrChunk = 0;
+ 
+ 	yaffs_FreeObject(in);
+ 	return YAFFS_OK;
+@@ -5075,62 +5097,63 @@ static int yaffs_DoGenericObjectDeletion
+  * and the inode associated with the file.
+  * It does not delete the links associated with the file.
+  */
+-static int yaffs_UnlinkFile(yaffs_Object * in)
++static int yaffs_UnlinkFileIfNeeded(yaffs_Object *in)
+ {
+ 
+ 	int retVal;
+ 	int immediateDeletion = 0;
+ 
+-	if (1) {
+ #ifdef __KERNEL__
+-		if (!in->myInode) {
+-			immediateDeletion = 1;
+-
+-		}
++	if (!in->myInode)
++		immediateDeletion = 1;
+ #else
+-		if (in->inUse <= 0) {
+-			immediateDeletion = 1;
+-
+-		}
++	if (in->inUse <= 0)
++		immediateDeletion = 1;
+ #endif
+-		if (immediateDeletion) {
+-			retVal =
+-			    yaffs_ChangeObjectName(in, in->myDev->deletedDir,
+-						   "deleted", 0, 0);
+-			T(YAFFS_TRACE_TRACING,
+-			  (TSTR("yaffs: immediate deletion of file %d" TENDSTR),
+-			   in->objectId));
+-			in->deleted = 1;
+-			in->myDev->nDeletedFiles++;
+-			if (0 && in->myDev->isYaffs2) {
+-				yaffs_ResizeFile(in, 0);
+-			}
+-			yaffs_SoftDeleteFile(in);
+-		} else {
+-			retVal =
+-			    yaffs_ChangeObjectName(in, in->myDev->unlinkedDir,
+-						   "unlinked", 0, 0);
+-		}
+ 
++	if (immediateDeletion) {
++		retVal =
++		    yaffs_ChangeObjectName(in, in->myDev->deletedDir,
++					   _Y("deleted"), 0, 0);
++		T(YAFFS_TRACE_TRACING,
++		  (TSTR("yaffs: immediate deletion of file %d" TENDSTR),
++		   in->objectId));
++		in->deleted = 1;
++		in->myDev->nDeletedFiles++;
++		if (1 || in->myDev->isYaffs2)
++			yaffs_ResizeFile(in, 0);
++		yaffs_SoftDeleteFile(in);
++	} else {
++		retVal =
++		    yaffs_ChangeObjectName(in, in->myDev->unlinkedDir,
++					   _Y("unlinked"), 0, 0);
+ 	}
++
++
+ 	return retVal;
+ }
+ 
+-int yaffs_DeleteFile(yaffs_Object * in)
++int yaffs_DeleteFile(yaffs_Object *in)
+ {
+ 	int retVal = YAFFS_OK;
++	int deleted = in->deleted;
++
++	yaffs_ResizeFile(in, 0);
+ 
+ 	if (in->nDataChunks > 0) {
+-		/* Use soft deletion if there is data in the file */
+-		if (!in->unlinked) {
+-			retVal = yaffs_UnlinkFile(in);
+-		}
++		/* Use soft deletion if there is data in the file.
++		 * That won't be the case if it has been resized to zero.
++		 */
++		if (!in->unlinked)
++			retVal = yaffs_UnlinkFileIfNeeded(in);
++
+ 		if (retVal == YAFFS_OK && in->unlinked && !in->deleted) {
+ 			in->deleted = 1;
++			deleted = 1;
+ 			in->myDev->nDeletedFiles++;
+ 			yaffs_SoftDeleteFile(in);
+ 		}
+-		return in->deleted ? YAFFS_OK : YAFFS_FAIL;
++		return deleted ? YAFFS_OK : YAFFS_FAIL;
+ 	} else {
+ 		/* The file has no data chunks so we toss it immediately */
+ 		yaffs_FreeTnode(in->myDev, in->variant.fileVariant.top);
+@@ -5141,62 +5164,75 @@ int yaffs_DeleteFile(yaffs_Object * in)
+ 	}
+ }
+ 
+-static int yaffs_DeleteDirectory(yaffs_Object * in)
++static int yaffs_DeleteDirectory(yaffs_Object *in)
+ {
+ 	/* First check that the directory is empty. */
+-	if (list_empty(&in->variant.directoryVariant.children)) {
++	if (ylist_empty(&in->variant.directoryVariant.children))
+ 		return yaffs_DoGenericObjectDeletion(in);
+-	}
+ 
+ 	return YAFFS_FAIL;
+ 
+ }
+ 
+-static int yaffs_DeleteSymLink(yaffs_Object * in)
++static int yaffs_DeleteSymLink(yaffs_Object *in)
+ {
+ 	YFREE(in->variant.symLinkVariant.alias);
+ 
+ 	return yaffs_DoGenericObjectDeletion(in);
+ }
+ 
+-static int yaffs_DeleteHardLink(yaffs_Object * in)
++static int yaffs_DeleteHardLink(yaffs_Object *in)
+ {
+ 	/* remove this hardlink from the list assocaited with the equivalent
+ 	 * object
+ 	 */
+-	list_del(&in->hardLinks);
++	ylist_del_init(&in->hardLinks);
+ 	return yaffs_DoGenericObjectDeletion(in);
+ }
+ 
+-static void yaffs_DestroyObject(yaffs_Object * obj)
++int yaffs_DeleteObject(yaffs_Object *obj)
+ {
++int retVal = -1;
+ 	switch (obj->variantType) {
+ 	case YAFFS_OBJECT_TYPE_FILE:
+-		yaffs_DeleteFile(obj);
++		retVal = yaffs_DeleteFile(obj);
+ 		break;
+ 	case YAFFS_OBJECT_TYPE_DIRECTORY:
+-		yaffs_DeleteDirectory(obj);
++		return yaffs_DeleteDirectory(obj);
+ 		break;
+ 	case YAFFS_OBJECT_TYPE_SYMLINK:
+-		yaffs_DeleteSymLink(obj);
++		retVal = yaffs_DeleteSymLink(obj);
+ 		break;
+ 	case YAFFS_OBJECT_TYPE_HARDLINK:
+-		yaffs_DeleteHardLink(obj);
++		retVal = yaffs_DeleteHardLink(obj);
+ 		break;
+ 	case YAFFS_OBJECT_TYPE_SPECIAL:
+-		yaffs_DoGenericObjectDeletion(obj);
++		retVal = yaffs_DoGenericObjectDeletion(obj);
+ 		break;
+ 	case YAFFS_OBJECT_TYPE_UNKNOWN:
++		retVal = 0;
+ 		break;		/* should not happen. */
+ 	}
++
++	return retVal;
+ }
+ 
+-static int yaffs_UnlinkWorker(yaffs_Object * obj)
++static int yaffs_UnlinkWorker(yaffs_Object *obj)
+ {
+ 
++	int immediateDeletion = 0;
++
++#ifdef __KERNEL__
++	if (!obj->myInode)
++		immediateDeletion = 1;
++#else
++	if (obj->inUse <= 0)
++		immediateDeletion = 1;
++#endif
++
+ 	if (obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) {
+ 		return yaffs_DeleteHardLink(obj);
+-	} else if (!list_empty(&obj->hardLinks)) {
++	} else if (!ylist_empty(&obj->hardLinks)) {
+ 		/* Curve ball: We're unlinking an object that has a hardlink.
+ 		 *
+ 		 * This problem arises because we are not strictly following
+@@ -5215,24 +5251,24 @@ static int yaffs_UnlinkWorker(yaffs_Obje
+ 		int retVal;
+ 		YCHAR name[YAFFS_MAX_NAME_LENGTH + 1];
+ 
+-		hl = list_entry(obj->hardLinks.next, yaffs_Object, hardLinks);
++		hl = ylist_entry(obj->hardLinks.next, yaffs_Object, hardLinks);
+ 
+-		list_del_init(&hl->hardLinks);
+-		list_del_init(&hl->siblings);
++		ylist_del_init(&hl->hardLinks);
++		ylist_del_init(&hl->siblings);
+ 
+ 		yaffs_GetObjectName(hl, name, YAFFS_MAX_NAME_LENGTH + 1);
+ 
+ 		retVal = yaffs_ChangeObjectName(obj, hl->parent, name, 0, 0);
+ 
+-		if (retVal == YAFFS_OK) {
++		if (retVal == YAFFS_OK)
+ 			retVal = yaffs_DoGenericObjectDeletion(hl);
+-		}
++
+ 		return retVal;
+ 
+-	} else {
++	} else if (immediateDeletion) {
+ 		switch (obj->variantType) {
+ 		case YAFFS_OBJECT_TYPE_FILE:
+-			return yaffs_UnlinkFile(obj);
++			return yaffs_DeleteFile(obj);
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_DIRECTORY:
+ 			return yaffs_DeleteDirectory(obj);
+@@ -5248,21 +5284,22 @@ static int yaffs_UnlinkWorker(yaffs_Obje
+ 		default:
+ 			return YAFFS_FAIL;
+ 		}
+-	}
++	} else
++		return yaffs_ChangeObjectName(obj, obj->myDev->unlinkedDir,
++					   _Y("unlinked"), 0, 0);
+ }
+ 
+ 
+-static int yaffs_UnlinkObject( yaffs_Object *obj)
++static int yaffs_UnlinkObject(yaffs_Object *obj)
+ {
+ 
+-	if (obj && obj->unlinkAllowed) {
++	if (obj && obj->unlinkAllowed)
+ 		return yaffs_UnlinkWorker(obj);
+-	}
+ 
+ 	return YAFFS_FAIL;
+ 
+ }
+-int yaffs_Unlink(yaffs_Object * dir, const YCHAR * name)
++int yaffs_Unlink(yaffs_Object *dir, const YCHAR *name)
+ {
+ 	yaffs_Object *obj;
+ 
+@@ -5272,8 +5309,8 @@ int yaffs_Unlink(yaffs_Object * dir, con
+ 
+ /*----------------------- Initialisation Scanning ---------------------- */
+ 
+-static void yaffs_HandleShadowedObject(yaffs_Device * dev, int objId,
+-				       int backwardScanning)
++static void yaffs_HandleShadowedObject(yaffs_Device *dev, int objId,
++				int backwardScanning)
+ {
+ 	yaffs_Object *obj;
+ 
+@@ -5286,9 +5323,8 @@ static void yaffs_HandleShadowedObject(y
+ 		/* Handle YAFFS2 case (backward scanning)
+ 		 * If the shadowed object exists then ignore.
+ 		 */
+-		if (yaffs_FindObjectByNumber(dev, objId)) {
++		if (yaffs_FindObjectByNumber(dev, objId))
+ 			return;
+-		}
+ 	}
+ 
+ 	/* Let's create it (if it does not exist) assuming it is a file so that it can do shrinking etc.
+@@ -5297,6 +5333,8 @@ static void yaffs_HandleShadowedObject(y
+ 	obj =
+ 	    yaffs_FindOrCreateObjectByNumber(dev, objId,
+ 					     YAFFS_OBJECT_TYPE_FILE);
++	if (!obj)
++		return;
+ 	yaffs_AddObjectToDirectory(dev->unlinkedDir, obj);
+ 	obj->variant.fileVariant.shrinkSize = 0;
+ 	obj->valid = 1;		/* So that we don't read any other info for this file */
+@@ -5325,44 +5363,77 @@ static void yaffs_HardlinkFixup(yaffs_De
+ 		if (in) {
+ 			/* Add the hardlink pointers */
+ 			hl->variant.hardLinkVariant.equivalentObject = in;
+-			list_add(&hl->hardLinks, &in->hardLinks);
++			ylist_add(&hl->hardLinks, &in->hardLinks);
+ 		} else {
+ 			/* Todo Need to report/handle this better.
+ 			 * Got a problem... hardlink to a non-existant object
+ 			 */
+ 			hl->variant.hardLinkVariant.equivalentObject = NULL;
+-			INIT_LIST_HEAD(&hl->hardLinks);
++			YINIT_LIST_HEAD(&hl->hardLinks);
+ 
+ 		}
+-
+ 	}
++}
++
++
+ 
++
++
++static int ybicmp(const void *a, const void *b)
++{
++	register int aseq = ((yaffs_BlockIndex *)a)->seq;
++	register int bseq = ((yaffs_BlockIndex *)b)->seq;
++	register int ablock = ((yaffs_BlockIndex *)a)->block;
++	register int bblock = ((yaffs_BlockIndex *)b)->block;
++	if (aseq == bseq)
++		return ablock - bblock;
++	else
++		return aseq - bseq;
+ }
+ 
+ 
++struct yaffs_ShadowFixerStruct {
++	int objectId;
++	int shadowedId;
++	struct yaffs_ShadowFixerStruct *next;
++};
++
+ 
++static void yaffs_StripDeletedObjects(yaffs_Device *dev)
++{
++	/*
++	*  Sort out state of unlinked and deleted objects after scanning.
++	*/
++	struct ylist_head *i;
++	struct ylist_head *n;
++	yaffs_Object *l;
+ 
++	/* Soft delete all the unlinked files */
++	ylist_for_each_safe(i, n,
++		&dev->unlinkedDir->variant.directoryVariant.children) {
++		if (i) {
++			l = ylist_entry(i, yaffs_Object, siblings);
++			yaffs_DeleteObject(l);
++		}
++	}
+ 
+-static int ybicmp(const void *a, const void *b){
+-    register int aseq = ((yaffs_BlockIndex *)a)->seq;
+-    register int bseq = ((yaffs_BlockIndex *)b)->seq;
+-    register int ablock = ((yaffs_BlockIndex *)a)->block;
+-    register int bblock = ((yaffs_BlockIndex *)b)->block;
+-    if( aseq == bseq )
+-        return ablock - bblock;
+-    else
+-        return aseq - bseq;
++	ylist_for_each_safe(i, n,
++		&dev->deletedDir->variant.directoryVariant.children) {
++		if (i) {
++			l = ylist_entry(i, yaffs_Object, siblings);
++			yaffs_DeleteObject(l);
++		}
++	}
+ 
+ }
+ 
+-static int yaffs_Scan(yaffs_Device * dev)
++static int yaffs_Scan(yaffs_Device *dev)
+ {
+ 	yaffs_ExtendedTags tags;
+ 	int blk;
+ 	int blockIterator;
+ 	int startIterator;
+ 	int endIterator;
+-	int nBlocksToScan = 0;
+ 	int result;
+ 
+ 	int chunk;
+@@ -5371,26 +5442,19 @@ static int yaffs_Scan(yaffs_Device * dev
+ 	yaffs_BlockState state;
+ 	yaffs_Object *hardList = NULL;
+ 	yaffs_BlockInfo *bi;
+-	int sequenceNumber;
++	__u32 sequenceNumber;
+ 	yaffs_ObjectHeader *oh;
+ 	yaffs_Object *in;
+ 	yaffs_Object *parent;
+-	int nBlocks = dev->internalEndBlock - dev->internalStartBlock + 1;
+ 
+ 	int alloc_failed = 0;
+ 
++	struct yaffs_ShadowFixerStruct *shadowFixerList = NULL;
++
+ 
+ 	__u8 *chunkData;
+ 
+-	yaffs_BlockIndex *blockIndex = NULL;
+ 
+-	if (dev->isYaffs2) {
+-		T(YAFFS_TRACE_SCAN,
+-		  (TSTR("yaffs_Scan is not for YAFFS2!" TENDSTR)));
+-		return YAFFS_FAIL;
+-	}
+-
+-	//TODO  Throw all the yaffs2 stuuf out of yaffs_Scan since it is only for yaffs1 format.
+ 
+ 	T(YAFFS_TRACE_SCAN,
+ 	  (TSTR("yaffs_Scan starts  intstartblk %d intendblk %d..." TENDSTR),
+@@ -5400,12 +5464,6 @@ static int yaffs_Scan(yaffs_Device * dev
+ 
+ 	dev->sequenceNumber = YAFFS_LOWEST_SEQUENCE_NUMBER;
+ 
+-	if (dev->isYaffs2) {
+-		blockIndex = YMALLOC(nBlocks * sizeof(yaffs_BlockIndex));
+-		if(!blockIndex)
+-			return YAFFS_FAIL;
+-	}
+-
+ 	/* Scan all the blocks to determine their state */
+ 	for (blk = dev->internalStartBlock; blk <= dev->internalEndBlock; blk++) {
+ 		bi = yaffs_GetBlockInfo(dev, blk);
+@@ -5418,6 +5476,9 @@ static int yaffs_Scan(yaffs_Device * dev
+ 		bi->blockState = state;
+ 		bi->sequenceNumber = sequenceNumber;
+ 
++		if (bi->sequenceNumber == YAFFS_SEQUENCE_BAD_BLOCK)
++			bi->blockState = state = YAFFS_BLOCK_STATE_DEAD;
++
+ 		T(YAFFS_TRACE_SCAN_DEBUG,
+ 		  (TSTR("Block scanning block %d state %d seq %d" TENDSTR), blk,
+ 		   state, sequenceNumber));
+@@ -5430,70 +5491,21 @@ static int yaffs_Scan(yaffs_Device * dev
+ 			  (TSTR("Block empty " TENDSTR)));
+ 			dev->nErasedBlocks++;
+ 			dev->nFreeChunks += dev->nChunksPerBlock;
+-		} else if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING) {
+-
+-			/* Determine the highest sequence number */
+-			if (dev->isYaffs2 &&
+-			    sequenceNumber >= YAFFS_LOWEST_SEQUENCE_NUMBER &&
+-			    sequenceNumber < YAFFS_HIGHEST_SEQUENCE_NUMBER) {
+-
+-				blockIndex[nBlocksToScan].seq = sequenceNumber;
+-				blockIndex[nBlocksToScan].block = blk;
+-
+-				nBlocksToScan++;
+-
+-				if (sequenceNumber >= dev->sequenceNumber) {
+-					dev->sequenceNumber = sequenceNumber;
+-				}
+-			} else if (dev->isYaffs2) {
+-				/* TODO: Nasty sequence number! */
+-				T(YAFFS_TRACE_SCAN,
+-				  (TSTR
+-				   ("Block scanning block %d has bad sequence number %d"
+-				    TENDSTR), blk, sequenceNumber));
+-
+-			}
+ 		}
+ 	}
+ 
+-	/* Sort the blocks
+-	 * Dungy old bubble sort for now...
+-	 */
+-	if (dev->isYaffs2) {
+-		yaffs_BlockIndex temp;
+-		int i;
+-		int j;
+-
+-		for (i = 0; i < nBlocksToScan; i++)
+-			for (j = i + 1; j < nBlocksToScan; j++)
+-				if (blockIndex[i].seq > blockIndex[j].seq) {
+-					temp = blockIndex[j];
+-					blockIndex[j] = blockIndex[i];
+-					blockIndex[i] = temp;
+-				}
+-	}
+-
+-	/* Now scan the blocks looking at the data. */
+-	if (dev->isYaffs2) {
+-		startIterator = 0;
+-		endIterator = nBlocksToScan - 1;
+-		T(YAFFS_TRACE_SCAN_DEBUG,
+-		  (TSTR("%d blocks to be scanned" TENDSTR), nBlocksToScan));
+-	} else {
+-		startIterator = dev->internalStartBlock;
+-		endIterator = dev->internalEndBlock;
+-	}
++	startIterator = dev->internalStartBlock;
++	endIterator = dev->internalEndBlock;
+ 
+ 	/* For each block.... */
+ 	for (blockIterator = startIterator; !alloc_failed && blockIterator <= endIterator;
+ 	     blockIterator++) {
+ 
+-		if (dev->isYaffs2) {
+-			/* get the block to scan in the correct order */
+-			blk = blockIndex[blockIterator].block;
+-		} else {
+-			blk = blockIterator;
+-		}
++		YYIELD();
++
++		YYIELD();
++
++		blk = blockIterator;
+ 
+ 		bi = yaffs_GetBlockInfo(dev, blk);
+ 		state = bi->blockState;
+@@ -5511,7 +5523,7 @@ static int yaffs_Scan(yaffs_Device * dev
+ 
+ 			/* Let's have a good look at this chunk... */
+ 
+-			if (!dev->isYaffs2 && tags.chunkDeleted) {
++			if (tags.eccResult == YAFFS_ECC_RESULT_UNFIXED || tags.chunkDeleted) {
+ 				/* YAFFS1 only...
+ 				 * A deleted chunk
+ 				 */
+@@ -5540,18 +5552,6 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					dev->allocationBlockFinder = blk;
+ 					/* Set it to here to encourage the allocator to go forth from here. */
+ 
+-					/* Yaffs2 sanity check:
+-					 * This should be the one with the highest sequence number
+-					 */
+-					if (dev->isYaffs2
+-					    && (dev->sequenceNumber !=
+-						bi->sequenceNumber)) {
+-						T(YAFFS_TRACE_ALWAYS,
+-						  (TSTR
+-						   ("yaffs: Allocation block %d was not highest sequence id:"
+-						    " block seq = %d, dev seq = %d"
+-						    TENDSTR), blk,bi->sequenceNumber,dev->sequenceNumber));
+-					}
+ 				}
+ 
+ 				dev->nFreeChunks += (dev->nChunksPerBlock - c);
+@@ -5570,11 +5570,11 @@ static int yaffs_Scan(yaffs_Device * dev
+ 				 * the same chunkId).
+ 				 */
+ 
+-				if(!in)
++				if (!in)
+ 					alloc_failed = 1;
+ 
+-				if(in){
+-					if(!yaffs_PutChunkIntoFile(in, tags.chunkId, chunk,1))
++				if (in) {
++					if (!yaffs_PutChunkIntoFile(in, tags.chunkId, chunk, 1))
+ 						alloc_failed = 1;
+ 				}
+ 
+@@ -5617,7 +5617,7 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					 * deleted, and worse still it has changed type. Delete the old object.
+ 					 */
+ 
+-					yaffs_DestroyObject(in);
++					yaffs_DeleteObject(in);
+ 
+ 					in = 0;
+ 				}
+@@ -5627,14 +5627,20 @@ static int yaffs_Scan(yaffs_Device * dev
+ 								      objectId,
+ 								      oh->type);
+ 
+-				if(!in)
++				if (!in)
+ 					alloc_failed = 1;
+ 
+ 				if (in && oh->shadowsObject > 0) {
+-					yaffs_HandleShadowedObject(dev,
+-								   oh->
+-								   shadowsObject,
+-								   0);
++
++					struct yaffs_ShadowFixerStruct *fixer;
++					fixer = YMALLOC(sizeof(struct yaffs_ShadowFixerStruct));
++					if (fixer) {
++						fixer->next = shadowFixerList;
++						shadowFixerList = fixer;
++						fixer->objectId = tags.objectId;
++						fixer->shadowedId = oh->shadowsObject;
++					}
++
+ 				}
+ 
+ 				if (in && in->valid) {
+@@ -5643,12 +5649,10 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					unsigned existingSerial = in->serial;
+ 					unsigned newSerial = tags.serialNumber;
+ 
+-					if (dev->isYaffs2 ||
+-					    ((existingSerial + 1) & 3) ==
+-					    newSerial) {
++					if (((existingSerial + 1) & 3) == newSerial) {
+ 						/* Use new one - destroy the exisiting one */
+ 						yaffs_DeleteChunk(dev,
+-								  in->chunkId,
++								  in->hdrChunk,
+ 								  1, __LINE__);
+ 						in->valid = 0;
+ 					} else {
+@@ -5681,7 +5685,8 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					in->yst_ctime = oh->yst_ctime;
+ 					in->yst_rdev = oh->yst_rdev;
+ #endif
+-					in->chunkId = chunk;
++					in->hdrChunk = chunk;
++					in->serial = tags.serialNumber;
+ 
+ 				} else if (in && !in->valid) {
+ 					/* we need to load this info */
+@@ -5705,7 +5710,8 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					in->yst_ctime = oh->yst_ctime;
+ 					in->yst_rdev = oh->yst_rdev;
+ #endif
+-					in->chunkId = chunk;
++					in->hdrChunk = chunk;
++					in->serial = tags.serialNumber;
+ 
+ 					yaffs_SetObjectName(in, oh->name);
+ 					in->dirty = 0;
+@@ -5718,25 +5724,25 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					    yaffs_FindOrCreateObjectByNumber
+ 					    (dev, oh->parentObjectId,
+ 					     YAFFS_OBJECT_TYPE_DIRECTORY);
+-					if (parent->variantType ==
++					if (!parent)
++						alloc_failed = 1;
++					if (parent && parent->variantType ==
+ 					    YAFFS_OBJECT_TYPE_UNKNOWN) {
+ 						/* Set up as a directory */
+ 						parent->variantType =
+-						    YAFFS_OBJECT_TYPE_DIRECTORY;
+-						INIT_LIST_HEAD(&parent->variant.
+-							       directoryVariant.
+-							       children);
+-					} else if (parent->variantType !=
+-						   YAFFS_OBJECT_TYPE_DIRECTORY)
+-					{
++							YAFFS_OBJECT_TYPE_DIRECTORY;
++						YINIT_LIST_HEAD(&parent->variant.
++								directoryVariant.
++								children);
++					} else if (!parent || parent->variantType !=
++						   YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 						/* Hoosterman, another problem....
+ 						 * We're trying to use a non-directory as a directory
+ 						 */
+ 
+ 						T(YAFFS_TRACE_ERROR,
+ 						  (TSTR
+-						   ("yaffs tragedy: attempting to use non-directory as"
+-						    " a directory in scan. Put in lost+found."
++						   ("yaffs tragedy: attempting to use non-directory as a directory in scan. Put in lost+found."
+ 						    TENDSTR)));
+ 						parent = dev->lostNFoundDir;
+ 					}
+@@ -5760,15 +5766,6 @@ static int yaffs_Scan(yaffs_Device * dev
+ 						/* Todo got a problem */
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_FILE:
+-						if (dev->isYaffs2
+-						    && oh->isShrink) {
+-							/* Prune back the shrunken chunks */
+-							yaffs_PruneResizedChunks
+-							    (in, oh->fileSize);
+-							/* Mark the block as having a shrinkHeader */
+-							bi->hasShrinkHeader = 1;
+-						}
+-
+ 						if (dev->useHeaderFileSize)
+ 
+ 							in->variant.fileVariant.
+@@ -5778,11 +5775,11 @@ static int yaffs_Scan(yaffs_Device * dev
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_HARDLINK:
+ 						in->variant.hardLinkVariant.
+-						    equivalentObjectId =
+-						    oh->equivalentObjectId;
++							equivalentObjectId =
++							oh->equivalentObjectId;
+ 						in->hardLinks.next =
+-						    (struct list_head *)
+-						    hardList;
++							(struct ylist_head *)
++							hardList;
+ 						hardList = in;
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_DIRECTORY:
+@@ -5794,15 +5791,17 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					case YAFFS_OBJECT_TYPE_SYMLINK:
+ 						in->variant.symLinkVariant.alias =
+ 						    yaffs_CloneString(oh->alias);
+-						if(!in->variant.symLinkVariant.alias)
++						if (!in->variant.symLinkVariant.alias)
+ 							alloc_failed = 1;
+ 						break;
+ 					}
+ 
++/*
+ 					if (parent == dev->deletedDir) {
+ 						yaffs_DestroyObject(in);
+ 						bi->hasShrinkHeader = 1;
+ 					}
++*/
+ 				}
+ 			}
+ 		}
+@@ -5823,10 +5822,6 @@ static int yaffs_Scan(yaffs_Device * dev
+ 
+ 	}
+ 
+-	if (blockIndex) {
+-		YFREE(blockIndex);
+-	}
+-
+ 
+ 	/* Ok, we've done all the scanning.
+ 	 * Fix up the hard link chains.
+@@ -5834,32 +5829,36 @@ static int yaffs_Scan(yaffs_Device * dev
+ 	 * hardlinks.
+ 	 */
+ 
+-	yaffs_HardlinkFixup(dev,hardList);
++	yaffs_HardlinkFixup(dev, hardList);
+ 
+-	/* Handle the unlinked files. Since they were left in an unlinked state we should
+-	 * just delete them.
+-	 */
++	/* Fix up any shadowed objects */
+ 	{
+-		struct list_head *i;
+-		struct list_head *n;
++		struct yaffs_ShadowFixerStruct *fixer;
++		yaffs_Object *obj;
+ 
+-		yaffs_Object *l;
+-		/* Soft delete all the unlinked files */
+-		list_for_each_safe(i, n,
+-				   &dev->unlinkedDir->variant.directoryVariant.
+-				   children) {
+-			if (i) {
+-				l = list_entry(i, yaffs_Object, siblings);
+-				yaffs_DestroyObject(l);
+-			}
++		while (shadowFixerList) {
++			fixer = shadowFixerList;
++			shadowFixerList = fixer->next;
++			/* Complete the rename transaction by deleting the shadowed object
++			 * then setting the object header to unshadowed.
++			 */
++			obj = yaffs_FindObjectByNumber(dev, fixer->shadowedId);
++			if (obj)
++				yaffs_DeleteObject(obj);
++
++			obj = yaffs_FindObjectByNumber(dev, fixer->objectId);
++
++			if (obj)
++				yaffs_UpdateObjectHeader(obj, NULL, 1, 0, 0);
++
++			YFREE(fixer);
+ 		}
+ 	}
+ 
+ 	yaffs_ReleaseTempBuffer(dev, chunkData, __LINE__);
+ 
+-	if(alloc_failed){
++	if (alloc_failed)
+ 		return YAFFS_FAIL;
+-	}
+ 
+ 	T(YAFFS_TRACE_SCAN, (TSTR("yaffs_Scan ends" TENDSTR)));
+ 
+@@ -5871,25 +5870,27 @@ static void yaffs_CheckObjectDetailsLoad
+ {
+ 	__u8 *chunkData;
+ 	yaffs_ObjectHeader *oh;
+-	yaffs_Device *dev = in->myDev;
++	yaffs_Device *dev;
+ 	yaffs_ExtendedTags tags;
+ 	int result;
+ 	int alloc_failed = 0;
+ 
+-	if(!in)
++	if (!in)
+ 		return;
+ 
++	dev = in->myDev;
++
+ #if 0
+-	T(YAFFS_TRACE_SCAN,(TSTR("details for object %d %s loaded" TENDSTR),
++	T(YAFFS_TRACE_SCAN, (TSTR("details for object %d %s loaded" TENDSTR),
+ 		in->objectId,
+ 		in->lazyLoaded ? "not yet" : "already"));
+ #endif
+ 
+-	if(in->lazyLoaded){
++	if (in->lazyLoaded && in->hdrChunk > 0) {
+ 		in->lazyLoaded = 0;
+ 		chunkData = yaffs_GetTempBuffer(dev, __LINE__);
+ 
+-		result = yaffs_ReadChunkWithTagsFromNAND(dev,in->chunkId,chunkData,&tags);
++		result = yaffs_ReadChunkWithTagsFromNAND(dev, in->hdrChunk, chunkData, &tags);
+ 		oh = (yaffs_ObjectHeader *) chunkData;
+ 
+ 		in->yst_mode = oh->yst_mode;
+@@ -5911,18 +5912,18 @@ static void yaffs_CheckObjectDetailsLoad
+ #endif
+ 		yaffs_SetObjectName(in, oh->name);
+ 
+-		if(in->variantType == YAFFS_OBJECT_TYPE_SYMLINK){
+-			 in->variant.symLinkVariant.alias =
++		if (in->variantType == YAFFS_OBJECT_TYPE_SYMLINK) {
++			in->variant.symLinkVariant.alias =
+ 						    yaffs_CloneString(oh->alias);
+-			if(!in->variant.symLinkVariant.alias)
++			if (!in->variant.symLinkVariant.alias)
+ 				alloc_failed = 1; /* Not returned to caller */
+ 		}
+ 
+-		yaffs_ReleaseTempBuffer(dev,chunkData, __LINE__);
++		yaffs_ReleaseTempBuffer(dev, chunkData, __LINE__);
+ 	}
+ }
+ 
+-static int yaffs_ScanBackwards(yaffs_Device * dev)
++static int yaffs_ScanBackwards(yaffs_Device *dev)
+ {
+ 	yaffs_ExtendedTags tags;
+ 	int blk;
+@@ -5938,7 +5939,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 	yaffs_BlockState state;
+ 	yaffs_Object *hardList = NULL;
+ 	yaffs_BlockInfo *bi;
+-	int sequenceNumber;
++	__u32 sequenceNumber;
+ 	yaffs_ObjectHeader *oh;
+ 	yaffs_Object *in;
+ 	yaffs_Object *parent;
+@@ -5972,12 +5973,12 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 	blockIndex = YMALLOC(nBlocks * sizeof(yaffs_BlockIndex));
+ 
+-	if(!blockIndex) {
++	if (!blockIndex) {
+ 		blockIndex = YMALLOC_ALT(nBlocks * sizeof(yaffs_BlockIndex));
+ 		altBlockIndex = 1;
+ 	}
+ 
+-	if(!blockIndex) {
++	if (!blockIndex) {
+ 		T(YAFFS_TRACE_SCAN,
+ 		  (TSTR("yaffs_Scan() could not allocate block index!" TENDSTR)));
+ 		return YAFFS_FAIL;
+@@ -5999,15 +6000,17 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 		bi->blockState = state;
+ 		bi->sequenceNumber = sequenceNumber;
+ 
+-		if(bi->sequenceNumber == YAFFS_SEQUENCE_CHECKPOINT_DATA)
++		if (bi->sequenceNumber == YAFFS_SEQUENCE_CHECKPOINT_DATA)
+ 			bi->blockState = state = YAFFS_BLOCK_STATE_CHECKPOINT;
++		if (bi->sequenceNumber == YAFFS_SEQUENCE_BAD_BLOCK)
++			bi->blockState = state = YAFFS_BLOCK_STATE_DEAD;
+ 
+ 		T(YAFFS_TRACE_SCAN_DEBUG,
+ 		  (TSTR("Block scanning block %d state %d seq %d" TENDSTR), blk,
+ 		   state, sequenceNumber));
+ 
+ 
+-		if(state == YAFFS_BLOCK_STATE_CHECKPOINT){
++		if (state == YAFFS_BLOCK_STATE_CHECKPOINT) {
+ 			dev->blocksInCheckpoint++;
+ 
+ 		} else if (state == YAFFS_BLOCK_STATE_DEAD) {
+@@ -6021,8 +6024,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 		} else if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING) {
+ 
+ 			/* Determine the highest sequence number */
+-			if (dev->isYaffs2 &&
+-			    sequenceNumber >= YAFFS_LOWEST_SEQUENCE_NUMBER &&
++			if (sequenceNumber >= YAFFS_LOWEST_SEQUENCE_NUMBER &&
+ 			    sequenceNumber < YAFFS_HIGHEST_SEQUENCE_NUMBER) {
+ 
+ 				blockIndex[nBlocksToScan].seq = sequenceNumber;
+@@ -6030,10 +6032,9 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 				nBlocksToScan++;
+ 
+-				if (sequenceNumber >= dev->sequenceNumber) {
++				if (sequenceNumber >= dev->sequenceNumber)
+ 					dev->sequenceNumber = sequenceNumber;
+-				}
+-			} else if (dev->isYaffs2) {
++			} else {
+ 				/* TODO: Nasty sequence number! */
+ 				T(YAFFS_TRACE_SCAN,
+ 				  (TSTR
+@@ -6053,11 +6054,13 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 	/* Sort the blocks */
+ #ifndef CONFIG_YAFFS_USE_OWN_SORT
+-	yaffs_qsort(blockIndex, nBlocksToScan,
+-		sizeof(yaffs_BlockIndex), ybicmp);
++	{
++		/* Use qsort now. */
++		yaffs_qsort(blockIndex, nBlocksToScan, sizeof(yaffs_BlockIndex), ybicmp);
++	}
+ #else
+ 	{
+-	 	/* Dungy old bubble sort... */
++		/* Dungy old bubble sort... */
+ 
+ 		yaffs_BlockIndex temp;
+ 		int i;
+@@ -6075,7 +6078,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 	YYIELD();
+ 
+-    	T(YAFFS_TRACE_SCAN, (TSTR("...done" TENDSTR)));
++	T(YAFFS_TRACE_SCAN, (TSTR("...done" TENDSTR)));
+ 
+ 	/* Now scan the blocks looking at the data. */
+ 	startIterator = 0;
+@@ -6085,10 +6088,10 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 	/* For each block.... backwards */
+ 	for (blockIterator = endIterator; !alloc_failed && blockIterator >= startIterator;
+-	     blockIterator--) {
+-	        /* Cooperative multitasking! This loop can run for so
++			blockIterator--) {
++		/* Cooperative multitasking! This loop can run for so
+ 		   long that watchdog timers expire. */
+-	        YYIELD();
++		YYIELD();
+ 
+ 		/* get the block to scan in the correct order */
+ 		blk = blockIndex[blockIterator].block;
+@@ -6127,10 +6130,8 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 				 * this is the one being allocated from
+ 				 */
+ 
+-				if(foundChunksInBlock)
+-				{
++				if (foundChunksInBlock) {
+ 					/* This is a chunk that was skipped due to failing the erased check */
+-
+ 				} else if (c == 0) {
+ 					/* We're looking at the first chunk in the block so the block is unused */
+ 					state = YAFFS_BLOCK_STATE_EMPTY;
+@@ -6138,7 +6139,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 				} else {
+ 					if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING ||
+ 					    state == YAFFS_BLOCK_STATE_ALLOCATING) {
+-					    	if(dev->sequenceNumber == bi->sequenceNumber) {
++						if (dev->sequenceNumber == bi->sequenceNumber) {
+ 							/* this is the block being allocated from */
+ 
+ 							T(YAFFS_TRACE_SCAN,
+@@ -6150,27 +6151,31 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 							dev->allocationBlock = blk;
+ 							dev->allocationPage = c;
+ 							dev->allocationBlockFinder = blk;
+-						}
+-						else {
++						} else {
+ 							/* This is a partially written block that is not
+ 							 * the current allocation block. This block must have
+ 							 * had a write failure, so set up for retirement.
+ 							 */
+ 
+-							 bi->needsRetiring = 1;
++							 /* bi->needsRetiring = 1; ??? TODO */
+ 							 bi->gcPrioritise = 1;
+ 
+ 							 T(YAFFS_TRACE_ALWAYS,
+-							 (TSTR("Partially written block %d being set for retirement" TENDSTR),
++							 (TSTR("Partially written block %d detected" TENDSTR),
+ 							 blk));
+ 						}
+-
+ 					}
+-
+ 				}
+ 
+ 				dev->nFreeChunks++;
+ 
++			} else if (tags.eccResult == YAFFS_ECC_RESULT_UNFIXED) {
++				T(YAFFS_TRACE_SCAN,
++				  (TSTR(" Unfixed ECC in chunk(%d:%d), chunk ignored"TENDSTR),
++				  blk, c));
++
++				  dev->nFreeChunks++;
++
+ 			} else if (tags.chunkId > 0) {
+ 				/* chunkId > 0 so it is a data chunk... */
+ 				unsigned int endpos;
+@@ -6187,7 +6192,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 								      tags.
+ 								      objectId,
+ 								      YAFFS_OBJECT_TYPE_FILE);
+-				if(!in){
++				if (!in) {
+ 					/* Out of memory */
+ 					alloc_failed = 1;
+ 				}
+@@ -6197,8 +6202,8 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 				    && chunkBase <
+ 				    in->variant.fileVariant.shrinkSize) {
+ 					/* This has not been invalidated by a resize */
+-					if(!yaffs_PutChunkIntoFile(in, tags.chunkId,
+-							       chunk, -1)){
++					if (!yaffs_PutChunkIntoFile(in, tags.chunkId,
++							       chunk, -1)) {
+ 						alloc_failed = 1;
+ 					}
+ 
+@@ -6221,7 +6226,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 						    scannedFileSize;
+ 					}
+ 
+-				} else if(in) {
++				} else if (in) {
+ 					/* This chunk has been invalidated by a resize, so delete */
+ 					yaffs_DeleteChunk(dev, chunk, 1, __LINE__);
+ 
+@@ -6242,6 +6247,8 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 					in = yaffs_FindOrCreateObjectByNumber
+ 					    (dev, tags.objectId,
+ 					     tags.extraObjectType);
++					if (!in)
++						alloc_failed = 1;
+ 				}
+ 
+ 				if (!in ||
+@@ -6251,8 +6258,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 				    tags.extraShadows ||
+ 				    (!in->valid &&
+ 				    (tags.objectId == YAFFS_OBJECTID_ROOT ||
+-				     tags.objectId == YAFFS_OBJECTID_LOSTNFOUND))
+-				    ) {
++				     tags.objectId == YAFFS_OBJECTID_LOSTNFOUND))) {
+ 
+ 					/* If we don't have  valid info then we need to read the chunk
+ 					 * TODO In future we can probably defer reading the chunk and
+@@ -6266,8 +6272,17 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 					oh = (yaffs_ObjectHeader *) chunkData;
+ 
+-					if (!in)
++					if (dev->inbandTags) {
++						/* Fix up the header if they got corrupted by inband tags */
++						oh->shadowsObject = oh->inbandShadowsObject;
++						oh->isShrink = oh->inbandIsShrink;
++					}
++
++					if (!in) {
+ 						in = yaffs_FindOrCreateObjectByNumber(dev, tags.objectId, oh->type);
++						if (!in)
++							alloc_failed = 1;
++					}
+ 
+ 				}
+ 
+@@ -6275,10 +6290,9 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 					/* TODO Hoosterman we have a problem! */
+ 					T(YAFFS_TRACE_ERROR,
+ 					  (TSTR
+-					   ("yaffs tragedy: Could not make object for object  %d  "
+-					    "at chunk %d during scan"
++					   ("yaffs tragedy: Could not make object for object  %d at chunk %d during scan"
+ 					    TENDSTR), tags.objectId, chunk));
+-
++					continue;
+ 				}
+ 
+ 				if (in->valid) {
+@@ -6289,10 +6303,9 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 					if ((in->variantType == YAFFS_OBJECT_TYPE_FILE) &&
+ 					     ((oh &&
+-					       oh-> type == YAFFS_OBJECT_TYPE_FILE)||
++					       oh->type == YAFFS_OBJECT_TYPE_FILE) ||
+ 					      (tags.extraHeaderInfoAvailable  &&
+-					       tags.extraObjectType == YAFFS_OBJECT_TYPE_FILE))
+-					    ) {
++					       tags.extraObjectType == YAFFS_OBJECT_TYPE_FILE))) {
+ 						__u32 thisSize =
+ 						    (oh) ? oh->fileSize : tags.
+ 						    extraFileLength;
+@@ -6300,7 +6313,9 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 						    (oh) ? oh->
+ 						    parentObjectId : tags.
+ 						    extraParentObjectId;
+-						unsigned isShrink =
++
++
++						isShrink =
+ 						    (oh) ? oh->isShrink : tags.
+ 						    extraIsShrinkHeader;
+ 
+@@ -6323,9 +6338,8 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 							    thisSize;
+ 						}
+ 
+-						if (isShrink) {
++						if (isShrink)
+ 							bi->hasShrinkHeader = 1;
+-						}
+ 
+ 					}
+ 					/* Use existing - destroy this one. */
+@@ -6333,6 +6347,17 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 				}
+ 
++				if (!in->valid && in->variantType !=
++				    (oh ? oh->type : tags.extraObjectType))
++					T(YAFFS_TRACE_ERROR, (
++						TSTR("yaffs tragedy: Bad object type, "
++					    TCONT("%d != %d, for object %d at chunk ")
++					    TCONT("%d during scan")
++						TENDSTR), oh ?
++					    oh->type : tags.extraObjectType,
++					    in->variantType, tags.objectId,
++					    chunk));
++
+ 				if (!in->valid &&
+ 				    (tags.objectId == YAFFS_OBJECTID_ROOT ||
+ 				     tags.objectId ==
+@@ -6340,7 +6365,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 					/* We only load some info, don't fiddle with directory structure */
+ 					in->valid = 1;
+ 
+-					if(oh) {
++					if (oh) {
+ 						in->variantType = oh->type;
+ 
+ 						in->yst_mode = oh->yst_mode;
+@@ -6365,15 +6390,15 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 						in->lazyLoaded = 1;
+ 					}
+ 
+-					in->chunkId = chunk;
++					in->hdrChunk = chunk;
+ 
+ 				} else if (!in->valid) {
+ 					/* we need to load this info */
+ 
+ 					in->valid = 1;
+-					in->chunkId = chunk;
++					in->hdrChunk = chunk;
+ 
+-					if(oh) {
++					if (oh) {
+ 						in->variantType = oh->type;
+ 
+ 						in->yst_mode = oh->yst_mode;
+@@ -6403,20 +6428,19 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 						yaffs_SetObjectName(in, oh->name);
+ 						parent =
+ 						    yaffs_FindOrCreateObjectByNumber
+-					    		(dev, oh->parentObjectId,
+-					     		 YAFFS_OBJECT_TYPE_DIRECTORY);
++							(dev, oh->parentObjectId,
++							 YAFFS_OBJECT_TYPE_DIRECTORY);
+ 
+ 						 fileSize = oh->fileSize;
+- 						 isShrink = oh->isShrink;
++						 isShrink = oh->isShrink;
+ 						 equivalentObjectId = oh->equivalentObjectId;
+ 
+-					}
+-					else {
++					} else {
+ 						in->variantType = tags.extraObjectType;
+ 						parent =
+ 						    yaffs_FindOrCreateObjectByNumber
+-					    		(dev, tags.extraParentObjectId,
+-					     		 YAFFS_OBJECT_TYPE_DIRECTORY);
++							(dev, tags.extraParentObjectId,
++							 YAFFS_OBJECT_TYPE_DIRECTORY);
+ 						 fileSize = tags.extraFileLength;
+ 						 isShrink = tags.extraIsShrinkHeader;
+ 						 equivalentObjectId = tags.extraEquivalentObjectId;
+@@ -6425,29 +6449,30 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 					}
+ 					in->dirty = 0;
+ 
++					if (!parent)
++						alloc_failed = 1;
++
+ 					/* directory stuff...
+ 					 * hook up to parent
+ 					 */
+ 
+-					if (parent->variantType ==
++					if (parent && parent->variantType ==
+ 					    YAFFS_OBJECT_TYPE_UNKNOWN) {
+ 						/* Set up as a directory */
+ 						parent->variantType =
+-						    YAFFS_OBJECT_TYPE_DIRECTORY;
+-						INIT_LIST_HEAD(&parent->variant.
+-							       directoryVariant.
+-							       children);
+-					} else if (parent->variantType !=
+-						   YAFFS_OBJECT_TYPE_DIRECTORY)
+-					{
++							YAFFS_OBJECT_TYPE_DIRECTORY;
++						YINIT_LIST_HEAD(&parent->variant.
++							directoryVariant.
++							children);
++					} else if (!parent || parent->variantType !=
++						   YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 						/* Hoosterman, another problem....
+ 						 * We're trying to use a non-directory as a directory
+ 						 */
+ 
+ 						T(YAFFS_TRACE_ERROR,
+ 						  (TSTR
+-						   ("yaffs tragedy: attempting to use non-directory as"
+-						    " a directory in scan. Put in lost+found."
++						   ("yaffs tragedy: attempting to use non-directory as a directory in scan. Put in lost+found."
+ 						    TENDSTR)));
+ 						parent = dev->lostNFoundDir;
+ 					}
+@@ -6494,12 +6519,12 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_HARDLINK:
+-						if(!itsUnlinked) {
+-						  in->variant.hardLinkVariant.equivalentObjectId =
+-						    equivalentObjectId;
+-						  in->hardLinks.next =
+-						    (struct list_head *) hardList;
+-						  hardList = in;
++						if (!itsUnlinked) {
++							in->variant.hardLinkVariant.equivalentObjectId =
++								equivalentObjectId;
++							in->hardLinks.next =
++								(struct ylist_head *) hardList;
++							hardList = in;
+ 						}
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_DIRECTORY:
+@@ -6509,12 +6534,11 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 						/* Do nothing */
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_SYMLINK:
+-						if(oh){
+-						   in->variant.symLinkVariant.alias =
+-						    yaffs_CloneString(oh->
+-								      alias);
+-						   if(!in->variant.symLinkVariant.alias)
+-						   	alloc_failed = 1;
++						if (oh) {
++							in->variant.symLinkVariant.alias =
++								yaffs_CloneString(oh->alias);
++							if (!in->variant.symLinkVariant.alias)
++								alloc_failed = 1;
+ 						}
+ 						break;
+ 					}
+@@ -6551,75 +6575,129 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 	 * We should now have scanned all the objects, now it's time to add these
+ 	 * hardlinks.
+ 	 */
+-	yaffs_HardlinkFixup(dev,hardList);
++	yaffs_HardlinkFixup(dev, hardList);
+ 
+ 
+-	/*
+-	*  Sort out state of unlinked and deleted objects.
+-	*/
+-	{
+-		struct list_head *i;
+-		struct list_head *n;
++	yaffs_ReleaseTempBuffer(dev, chunkData, __LINE__);
+ 
+-		yaffs_Object *l;
++	if (alloc_failed)
++		return YAFFS_FAIL;
+ 
+-		/* Soft delete all the unlinked files */
+-		list_for_each_safe(i, n,
+-				   &dev->unlinkedDir->variant.directoryVariant.
+-				   children) {
+-			if (i) {
+-				l = list_entry(i, yaffs_Object, siblings);
+-				yaffs_DestroyObject(l);
+-			}
+-		}
++	T(YAFFS_TRACE_SCAN, (TSTR("yaffs_ScanBackwards ends" TENDSTR)));
+ 
+-		/* Soft delete all the deletedDir files */
+-		list_for_each_safe(i, n,
+-				   &dev->deletedDir->variant.directoryVariant.
+-				   children) {
+-			if (i) {
+-				l = list_entry(i, yaffs_Object, siblings);
+-				yaffs_DestroyObject(l);
++	return YAFFS_OK;
++}
+ 
+-			}
++/*------------------------------  Directory Functions ----------------------------- */
++
++static void yaffs_VerifyObjectInDirectory(yaffs_Object *obj)
++{
++	struct ylist_head *lh;
++	yaffs_Object *listObj;
++
++	int count = 0;
++
++	if (!obj) {
++		T(YAFFS_TRACE_ALWAYS, (TSTR("No object to verify" TENDSTR)));
++		YBUG();
++		return;
++	}
++
++	if (yaffs_SkipVerification(obj->myDev))
++		return;
++
++	if (!obj->parent) {
++		T(YAFFS_TRACE_ALWAYS, (TSTR("Object does not have parent" TENDSTR)));
++		YBUG();
++		return;
++	}
++
++	if (obj->parent->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
++		T(YAFFS_TRACE_ALWAYS, (TSTR("Parent is not directory" TENDSTR)));
++		YBUG();
++	}
++
++	/* Iterate through the objects in each hash entry */
++
++	ylist_for_each(lh, &obj->parent->variant.directoryVariant.children) {
++		if (lh) {
++			listObj = ylist_entry(lh, yaffs_Object, siblings);
++			yaffs_VerifyObject(listObj);
++			if (obj == listObj)
++				count++;
+ 		}
++	 }
++
++	if (count != 1) {
++		T(YAFFS_TRACE_ALWAYS, (TSTR("Object in directory %d times" TENDSTR), count));
++		YBUG();
+ 	}
++}
+ 
+-	yaffs_ReleaseTempBuffer(dev, chunkData, __LINE__);
++static void yaffs_VerifyDirectory(yaffs_Object *directory)
++{
++	struct ylist_head *lh;
++	yaffs_Object *listObj;
+ 
+-	if(alloc_failed){
+-		return YAFFS_FAIL;
++	if (!directory) {
++		YBUG();
++		return;
+ 	}
+ 
+-	T(YAFFS_TRACE_SCAN, (TSTR("yaffs_ScanBackwards ends" TENDSTR)));
++	if (yaffs_SkipFullVerification(directory->myDev))
++		return;
+ 
+-	return YAFFS_OK;
++	if (directory->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
++		T(YAFFS_TRACE_ALWAYS, (TSTR("Directory has wrong type: %d" TENDSTR), directory->variantType));
++		YBUG();
++	}
++
++	/* Iterate through the objects in each hash entry */
++
++	ylist_for_each(lh, &directory->variant.directoryVariant.children) {
++		if (lh) {
++			listObj = ylist_entry(lh, yaffs_Object, siblings);
++			if (listObj->parent != directory) {
++				T(YAFFS_TRACE_ALWAYS, (TSTR("Object in directory list has wrong parent %p" TENDSTR), listObj->parent));
++				YBUG();
++			}
++			yaffs_VerifyObjectInDirectory(listObj);
++		}
++	}
+ }
+ 
+-/*------------------------------  Directory Functions ----------------------------- */
+ 
+-static void yaffs_RemoveObjectFromDirectory(yaffs_Object * obj)
++static void yaffs_RemoveObjectFromDirectory(yaffs_Object *obj)
+ {
+ 	yaffs_Device *dev = obj->myDev;
++	yaffs_Object *parent;
++
++	yaffs_VerifyObjectInDirectory(obj);
++	parent = obj->parent;
++
++	yaffs_VerifyDirectory(parent);
+ 
+-	if(dev && dev->removeObjectCallback)
++	if (dev && dev->removeObjectCallback)
+ 		dev->removeObjectCallback(obj);
+ 
+-	list_del_init(&obj->siblings);
++
++	ylist_del_init(&obj->siblings);
+ 	obj->parent = NULL;
++
++	yaffs_VerifyDirectory(parent);
+ }
+ 
+ 
+-static void yaffs_AddObjectToDirectory(yaffs_Object * directory,
+-				       yaffs_Object * obj)
++static void yaffs_AddObjectToDirectory(yaffs_Object *directory,
++					yaffs_Object *obj)
+ {
+-
+ 	if (!directory) {
+ 		T(YAFFS_TRACE_ALWAYS,
+ 		  (TSTR
+ 		   ("tragedy: Trying to add an object to a null pointer directory"
+ 		    TENDSTR)));
+ 		YBUG();
++		return;
+ 	}
+ 	if (directory->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 		T(YAFFS_TRACE_ALWAYS,
+@@ -6631,37 +6709,42 @@ static void yaffs_AddObjectToDirectory(y
+ 
+ 	if (obj->siblings.prev == NULL) {
+ 		/* Not initialised */
+-		INIT_LIST_HEAD(&obj->siblings);
+-
+-	} else if (!list_empty(&obj->siblings)) {
+-		/* If it is holed up somewhere else, un hook it */
+-		yaffs_RemoveObjectFromDirectory(obj);
++		YBUG();
+ 	}
++
++
++	yaffs_VerifyDirectory(directory);
++
++	yaffs_RemoveObjectFromDirectory(obj);
++
++
+ 	/* Now add it */
+-	list_add(&obj->siblings, &directory->variant.directoryVariant.children);
++	ylist_add(&obj->siblings, &directory->variant.directoryVariant.children);
+ 	obj->parent = directory;
+ 
+ 	if (directory == obj->myDev->unlinkedDir
+-	    || directory == obj->myDev->deletedDir) {
++			|| directory == obj->myDev->deletedDir) {
+ 		obj->unlinked = 1;
+ 		obj->myDev->nUnlinkedFiles++;
+ 		obj->renameAllowed = 0;
+ 	}
++
++	yaffs_VerifyDirectory(directory);
++	yaffs_VerifyObjectInDirectory(obj);
+ }
+ 
+-yaffs_Object *yaffs_FindObjectByName(yaffs_Object * directory,
+-				     const YCHAR * name)
++yaffs_Object *yaffs_FindObjectByName(yaffs_Object *directory,
++				     const YCHAR *name)
+ {
+ 	int sum;
+ 
+-	struct list_head *i;
++	struct ylist_head *i;
+ 	YCHAR buffer[YAFFS_MAX_NAME_LENGTH + 1];
+ 
+ 	yaffs_Object *l;
+ 
+-	if (!name) {
++	if (!name)
+ 		return NULL;
+-	}
+ 
+ 	if (!directory) {
+ 		T(YAFFS_TRACE_ALWAYS,
+@@ -6669,6 +6752,7 @@ yaffs_Object *yaffs_FindObjectByName(yaf
+ 		   ("tragedy: yaffs_FindObjectByName: null pointer directory"
+ 		    TENDSTR)));
+ 		YBUG();
++		return NULL;
+ 	}
+ 	if (directory->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 		T(YAFFS_TRACE_ALWAYS,
+@@ -6679,28 +6763,27 @@ yaffs_Object *yaffs_FindObjectByName(yaf
+ 
+ 	sum = yaffs_CalcNameSum(name);
+ 
+-	list_for_each(i, &directory->variant.directoryVariant.children) {
++	ylist_for_each(i, &directory->variant.directoryVariant.children) {
+ 		if (i) {
+-			l = list_entry(i, yaffs_Object, siblings);
++			l = ylist_entry(i, yaffs_Object, siblings);
++
++			if (l->parent != directory)
++				YBUG();
+ 
+ 			yaffs_CheckObjectDetailsLoaded(l);
+ 
+ 			/* Special case for lost-n-found */
+ 			if (l->objectId == YAFFS_OBJECTID_LOSTNFOUND) {
+-				if (yaffs_strcmp(name, YAFFS_LOSTNFOUND_NAME) == 0) {
++				if (yaffs_strcmp(name, YAFFS_LOSTNFOUND_NAME) == 0)
+ 					return l;
+-				}
+-			} else if (yaffs_SumCompare(l->sum, sum) || l->chunkId <= 0)
+-			{
+-				/* LostnFound cunk called Objxxx
++			} else if (yaffs_SumCompare(l->sum, sum) || l->hdrChunk <= 0) {
++				/* LostnFound chunk called Objxxx
+ 				 * Do a real check
+ 				 */
+ 				yaffs_GetObjectName(l, buffer,
+ 						    YAFFS_MAX_NAME_LENGTH);
+-				if (yaffs_strncmp(name, buffer,YAFFS_MAX_NAME_LENGTH) == 0) {
++				if (yaffs_strncmp(name, buffer, YAFFS_MAX_NAME_LENGTH) == 0)
+ 					return l;
+-				}
+-
+ 			}
+ 		}
+ 	}
+@@ -6710,10 +6793,10 @@ yaffs_Object *yaffs_FindObjectByName(yaf
+ 
+ 
+ #if 0
+-int yaffs_ApplyToDirectoryChildren(yaffs_Object * theDir,
+-				   int (*fn) (yaffs_Object *))
++int yaffs_ApplyToDirectoryChildren(yaffs_Object *theDir,
++					int (*fn) (yaffs_Object *))
+ {
+-	struct list_head *i;
++	struct ylist_head *i;
+ 	yaffs_Object *l;
+ 
+ 	if (!theDir) {
+@@ -6722,20 +6805,21 @@ int yaffs_ApplyToDirectoryChildren(yaffs
+ 		   ("tragedy: yaffs_FindObjectByName: null pointer directory"
+ 		    TENDSTR)));
+ 		YBUG();
++		return YAFFS_FAIL;
+ 	}
+ 	if (theDir->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 		T(YAFFS_TRACE_ALWAYS,
+ 		  (TSTR
+ 		   ("tragedy: yaffs_FindObjectByName: non-directory" TENDSTR)));
+ 		YBUG();
++		return YAFFS_FAIL;
+ 	}
+ 
+-	list_for_each(i, &theDir->variant.directoryVariant.children) {
++	ylist_for_each(i, &theDir->variant.directoryVariant.children) {
+ 		if (i) {
+-			l = list_entry(i, yaffs_Object, siblings);
+-			if (l && !fn(l)) {
++			l = ylist_entry(i, yaffs_Object, siblings);
++			if (l && !fn(l))
+ 				return YAFFS_FAIL;
+-			}
+ 		}
+ 	}
+ 
+@@ -6748,7 +6832,7 @@ int yaffs_ApplyToDirectoryChildren(yaffs
+  * actual object.
+  */
+ 
+-yaffs_Object *yaffs_GetEquivalentObject(yaffs_Object * obj)
++yaffs_Object *yaffs_GetEquivalentObject(yaffs_Object *obj)
+ {
+ 	if (obj && obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) {
+ 		/* We want the object id of the equivalent object, not this one */
+@@ -6756,10 +6840,9 @@ yaffs_Object *yaffs_GetEquivalentObject(
+ 		yaffs_CheckObjectDetailsLoaded(obj);
+ 	}
+ 	return obj;
+-
+ }
+ 
+-int yaffs_GetObjectName(yaffs_Object * obj, YCHAR * name, int buffSize)
++int yaffs_GetObjectName(yaffs_Object *obj, YCHAR *name, int buffSize)
+ {
+ 	memset(name, 0, buffSize * sizeof(YCHAR));
+ 
+@@ -6767,18 +6850,26 @@ int yaffs_GetObjectName(yaffs_Object * o
+ 
+ 	if (obj->objectId == YAFFS_OBJECTID_LOSTNFOUND) {
+ 		yaffs_strncpy(name, YAFFS_LOSTNFOUND_NAME, buffSize - 1);
+-	} else if (obj->chunkId <= 0) {
++	} else if (obj->hdrChunk <= 0) {
+ 		YCHAR locName[20];
++		YCHAR numString[20];
++		YCHAR *x = &numString[19];
++		unsigned v = obj->objectId;
++		numString[19] = 0;
++		while (v > 0) {
++			x--;
++			*x = '0' + (v % 10);
++			v /= 10;
++		}
+ 		/* make up a name */
+-		yaffs_sprintf(locName, _Y("%s%d"), YAFFS_LOSTNFOUND_PREFIX,
+-			      obj->objectId);
++		yaffs_strcpy(locName, YAFFS_LOSTNFOUND_PREFIX);
++		yaffs_strcat(locName, x);
+ 		yaffs_strncpy(name, locName, buffSize - 1);
+ 
+ 	}
+ #ifdef CONFIG_YAFFS_SHORT_NAMES_IN_RAM
+-	else if (obj->shortName[0]) {
++	else if (obj->shortName[0])
+ 		yaffs_strcpy(name, obj->shortName);
+-	}
+ #endif
+ 	else {
+ 		int result;
+@@ -6788,9 +6879,9 @@ int yaffs_GetObjectName(yaffs_Object * o
+ 
+ 		memset(buffer, 0, obj->myDev->nDataBytesPerChunk);
+ 
+-		if (obj->chunkId >= 0) {
++		if (obj->hdrChunk > 0) {
+ 			result = yaffs_ReadChunkWithTagsFromNAND(obj->myDev,
+-							obj->chunkId, buffer,
++							obj->hdrChunk, buffer,
+ 							NULL);
+ 		}
+ 		yaffs_strncpy(name, oh->name, buffSize - 1);
+@@ -6801,46 +6892,43 @@ int yaffs_GetObjectName(yaffs_Object * o
+ 	return yaffs_strlen(name);
+ }
+ 
+-int yaffs_GetObjectFileLength(yaffs_Object * obj)
++int yaffs_GetObjectFileLength(yaffs_Object *obj)
+ {
+-
+ 	/* Dereference any hard linking */
+ 	obj = yaffs_GetEquivalentObject(obj);
+ 
+-	if (obj->variantType == YAFFS_OBJECT_TYPE_FILE) {
++	if (obj->variantType == YAFFS_OBJECT_TYPE_FILE)
+ 		return obj->variant.fileVariant.fileSize;
+-	}
+-	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK) {
++	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK)
+ 		return yaffs_strlen(obj->variant.symLinkVariant.alias);
+-	} else {
++	else {
+ 		/* Only a directory should drop through to here */
+ 		return obj->myDev->nDataBytesPerChunk;
+ 	}
+ }
+ 
+-int yaffs_GetObjectLinkCount(yaffs_Object * obj)
++int yaffs_GetObjectLinkCount(yaffs_Object *obj)
+ {
+ 	int count = 0;
+-	struct list_head *i;
++	struct ylist_head *i;
+ 
+-	if (!obj->unlinked) {
+-		count++;	/* the object itself */
+-	}
+-	list_for_each(i, &obj->hardLinks) {
+-		count++;	/* add the hard links; */
+-	}
+-	return count;
++	if (!obj->unlinked)
++		count++;		/* the object itself */
++
++	ylist_for_each(i, &obj->hardLinks)
++		count++;		/* add the hard links; */
+ 
++	return count;
+ }
+ 
+-int yaffs_GetObjectInode(yaffs_Object * obj)
++int yaffs_GetObjectInode(yaffs_Object *obj)
+ {
+ 	obj = yaffs_GetEquivalentObject(obj);
+ 
+ 	return obj->objectId;
+ }
+ 
+-unsigned yaffs_GetObjectType(yaffs_Object * obj)
++unsigned yaffs_GetObjectType(yaffs_Object *obj)
+ {
+ 	obj = yaffs_GetEquivalentObject(obj);
+ 
+@@ -6872,19 +6960,18 @@ unsigned yaffs_GetObjectType(yaffs_Objec
+ 	}
+ }
+ 
+-YCHAR *yaffs_GetSymlinkAlias(yaffs_Object * obj)
++YCHAR *yaffs_GetSymlinkAlias(yaffs_Object *obj)
+ {
+ 	obj = yaffs_GetEquivalentObject(obj);
+-	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK) {
++	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK)
+ 		return yaffs_CloneString(obj->variant.symLinkVariant.alias);
+-	} else {
++	else
+ 		return yaffs_CloneString(_Y(""));
+-	}
+ }
+ 
+ #ifndef CONFIG_YAFFS_WINCE
+ 
+-int yaffs_SetAttributes(yaffs_Object * obj, struct iattr *attr)
++int yaffs_SetAttributes(yaffs_Object *obj, struct iattr *attr)
+ {
+ 	unsigned int valid = attr->ia_valid;
+ 
+@@ -6910,7 +6997,7 @@ int yaffs_SetAttributes(yaffs_Object * o
+ 	return YAFFS_OK;
+ 
+ }
+-int yaffs_GetAttributes(yaffs_Object * obj, struct iattr *attr)
++int yaffs_GetAttributes(yaffs_Object *obj, struct iattr *attr)
+ {
+ 	unsigned int valid = 0;
+ 
+@@ -6934,13 +7021,12 @@ int yaffs_GetAttributes(yaffs_Object * o
+ 	attr->ia_valid = valid;
+ 
+ 	return YAFFS_OK;
+-
+ }
+ 
+ #endif
+ 
+ #if 0
+-int yaffs_DumpObject(yaffs_Object * obj)
++int yaffs_DumpObject(yaffs_Object *obj)
+ {
+ 	YCHAR name[257];
+ 
+@@ -6951,7 +7037,7 @@ int yaffs_DumpObject(yaffs_Object * obj)
+ 	   ("Object %d, inode %d \"%s\"\n dirty %d valid %d serial %d sum %d"
+ 	    " chunk %d type %d size %d\n"
+ 	    TENDSTR), obj->objectId, yaffs_GetObjectInode(obj), name,
+-	   obj->dirty, obj->valid, obj->serial, obj->sum, obj->chunkId,
++	   obj->dirty, obj->valid, obj->serial, obj->sum, obj->hdrChunk,
+ 	   yaffs_GetObjectType(obj), yaffs_GetObjectFileLength(obj)));
+ 
+ 	return YAFFS_OK;
+@@ -6960,7 +7046,7 @@ int yaffs_DumpObject(yaffs_Object * obj)
+ 
+ /*---------------------------- Initialisation code -------------------------------------- */
+ 
+-static int yaffs_CheckDevFunctions(const yaffs_Device * dev)
++static int yaffs_CheckDevFunctions(const yaffs_Device *dev)
+ {
+ 
+ 	/* Common functions, gotta have */
+@@ -7011,7 +7097,7 @@ static int yaffs_CreateInitialDirectorie
+ 	    yaffs_CreateFakeDirectory(dev, YAFFS_OBJECTID_LOSTNFOUND,
+ 				      YAFFS_LOSTNFOUND_MODE | S_IFDIR);
+ 
+-	if(dev->lostNFoundDir && dev->rootDir && dev->unlinkedDir && dev->deletedDir){
++	if (dev->lostNFoundDir && dev->rootDir && dev->unlinkedDir && dev->deletedDir) {
+ 		yaffs_AddObjectToDirectory(dev->rootDir, dev->lostNFoundDir);
+ 		return YAFFS_OK;
+ 	}
+@@ -7019,7 +7105,7 @@ static int yaffs_CreateInitialDirectorie
+ 	return YAFFS_FAIL;
+ }
+ 
+-int yaffs_GutsInitialise(yaffs_Device * dev)
++int yaffs_GutsInitialise(yaffs_Device *dev)
+ {
+ 	int init_failed = 0;
+ 	unsigned x;
+@@ -7040,6 +7126,8 @@ int yaffs_GutsInitialise(yaffs_Device * 
+ 	dev->chunkOffset = 0;
+ 	dev->nFreeChunks = 0;
+ 
++	dev->gcBlock = -1;
++
+ 	if (dev->startBlock == 0) {
+ 		dev->internalStartBlock = dev->startBlock + 1;
+ 		dev->internalEndBlock = dev->endBlock + 1;
+@@ -7049,18 +7137,18 @@ int yaffs_GutsInitialise(yaffs_Device * 
+ 
+ 	/* Check geometry parameters. */
+ 
+-	if ((dev->isYaffs2 && dev->nDataBytesPerChunk < 1024) ||
+-	    (!dev->isYaffs2 && dev->nDataBytesPerChunk != 512) ||
++	if ((!dev->inbandTags && dev->isYaffs2 && dev->totalBytesPerChunk < 1024) ||
++	    (!dev->isYaffs2 && dev->totalBytesPerChunk < 512) ||
++	    (dev->inbandTags && !dev->isYaffs2) ||
+ 	     dev->nChunksPerBlock < 2 ||
+ 	     dev->nReservedBlocks < 2 ||
+ 	     dev->internalStartBlock <= 0 ||
+ 	     dev->internalEndBlock <= 0 ||
+-	     dev->internalEndBlock <= (dev->internalStartBlock + dev->nReservedBlocks + 2)	// otherwise it is too small
+-	    ) {
++	     dev->internalEndBlock <= (dev->internalStartBlock + dev->nReservedBlocks + 2)) {	/* otherwise it is too small */
+ 		T(YAFFS_TRACE_ALWAYS,
+ 		  (TSTR
+-		   ("yaffs: NAND geometry problems: chunk size %d, type is yaffs%s "
+-		    TENDSTR), dev->nDataBytesPerChunk, dev->isYaffs2 ? "2" : ""));
++		   ("yaffs: NAND geometry problems: chunk size %d, type is yaffs%s, inbandTags %d "
++		    TENDSTR), dev->totalBytesPerChunk, dev->isYaffs2 ? "2" : "", dev->inbandTags));
+ 		return YAFFS_FAIL;
+ 	}
+ 
+@@ -7070,6 +7158,12 @@ int yaffs_GutsInitialise(yaffs_Device * 
+ 		return YAFFS_FAIL;
+ 	}
+ 
++	/* Sort out space for inband tags, if required */
++	if (dev->inbandTags)
++		dev->nDataBytesPerChunk = dev->totalBytesPerChunk - sizeof(yaffs_PackedTags2TagsPart);
++	else
++		dev->nDataBytesPerChunk = dev->totalBytesPerChunk;
++
+ 	/* Got the right mix of functions? */
+ 	if (!yaffs_CheckDevFunctions(dev)) {
+ 		/* Function missing */
+@@ -7097,31 +7191,18 @@ int yaffs_GutsInitialise(yaffs_Device * 
+ 
+ 	dev->isMounted = 1;
+ 
+-
+-
+ 	/* OK now calculate a few things for the device */
+ 
+ 	/*
+ 	 *  Calculate all the chunk size manipulation numbers:
+ 	 */
+-	 /* Start off assuming it is a power of 2 */
+-	 dev->chunkShift = ShiftDiv(dev->nDataBytesPerChunk);
+-	 dev->chunkMask = (1<<dev->chunkShift) - 1;
+-
+-	 if(dev->nDataBytesPerChunk == (dev->chunkMask + 1)){
+-	 	/* Yes it is a power of 2, disable crumbs */
+-		dev->crumbMask = 0;
+-		dev->crumbShift = 0;
+-		dev->crumbsPerChunk = 0;
+-	 } else {
+-	 	/* Not a power of 2, use crumbs instead */
+-		dev->crumbShift = ShiftDiv(sizeof(yaffs_PackedTags2TagsPart));
+-		dev->crumbMask = (1<<dev->crumbShift)-1;
+-		dev->crumbsPerChunk = dev->nDataBytesPerChunk/(1 << dev->crumbShift);
+-		dev->chunkShift = 0;
+-		dev->chunkMask = 0;
+-	}
+-
++	x = dev->nDataBytesPerChunk;
++	/* We always use dev->chunkShift and dev->chunkDiv */
++	dev->chunkShift = Shifts(x);
++	x >>= dev->chunkShift;
++	dev->chunkDiv = x;
++	/* We only use chunk mask if chunkDiv is 1 */
++	dev->chunkMask = (1<<dev->chunkShift) - 1;
+ 
+ 	/*
+ 	 * Calculate chunkGroupBits.
+@@ -7133,16 +7214,15 @@ int yaffs_GutsInitialise(yaffs_Device * 
+ 	bits = ShiftsGE(x);
+ 
+ 	/* Set up tnode width if wide tnodes are enabled. */
+-	if(!dev->wideTnodesDisabled){
++	if (!dev->wideTnodesDisabled) {
+ 		/* bits must be even so that we end up with 32-bit words */
+-		if(bits & 1)
++		if (bits & 1)
+ 			bits++;
+-		if(bits < 16)
++		if (bits < 16)
+ 			dev->tnodeWidth = 16;
+ 		else
+ 			dev->tnodeWidth = bits;
+-	}
+-	else
++	} else
+ 		dev->tnodeWidth = 16;
+ 
+ 	dev->tnodeMask = (1<<dev->tnodeWidth)-1;
+@@ -7193,7 +7273,7 @@ int yaffs_GutsInitialise(yaffs_Device * 
+ 	dev->hasPendingPrioritisedGCs = 1; /* Assume the worst for now, will get fixed on first GC */
+ 
+ 	/* Initialise temporary buffers and caches. */
+-	if(!yaffs_InitialiseTempBuffers(dev))
++	if (!yaffs_InitialiseTempBuffers(dev))
+ 		init_failed = 1;
+ 
+ 	dev->srCache = NULL;
+@@ -7203,25 +7283,26 @@ int yaffs_GutsInitialise(yaffs_Device * 
+ 	if (!init_failed &&
+ 	    dev->nShortOpCaches > 0) {
+ 		int i;
+-		__u8 *buf;
++		void *buf;
+ 		int srCacheBytes = dev->nShortOpCaches * sizeof(yaffs_ChunkCache);
+ 
+-		if (dev->nShortOpCaches > YAFFS_MAX_SHORT_OP_CACHES) {
++		if (dev->nShortOpCaches > YAFFS_MAX_SHORT_OP_CACHES)
+ 			dev->nShortOpCaches = YAFFS_MAX_SHORT_OP_CACHES;
+-		}
+ 
+-		buf = dev->srCache =  YMALLOC(srCacheBytes);
++		dev->srCache =  YMALLOC(srCacheBytes);
+ 
+-		if(dev->srCache)
+-			memset(dev->srCache,0,srCacheBytes);
++		buf = (__u8 *) dev->srCache;
++
++		if (dev->srCache)
++			memset(dev->srCache, 0, srCacheBytes);
+ 
+ 		for (i = 0; i < dev->nShortOpCaches && buf; i++) {
+ 			dev->srCache[i].object = NULL;
+ 			dev->srCache[i].lastUse = 0;
+ 			dev->srCache[i].dirty = 0;
+-			dev->srCache[i].data = buf = YMALLOC_DMA(dev->nDataBytesPerChunk);
++			dev->srCache[i].data = buf = YMALLOC_DMA(dev->totalBytesPerChunk);
+ 		}
+-		if(!buf)
++		if (!buf)
+ 			init_failed = 1;
+ 
+ 		dev->srLastUse = 0;
+@@ -7229,29 +7310,30 @@ int yaffs_GutsInitialise(yaffs_Device * 
+ 
+ 	dev->cacheHits = 0;
+ 
+-	if(!init_failed){
++	if (!init_failed) {
+ 		dev->gcCleanupList = YMALLOC(dev->nChunksPerBlock * sizeof(__u32));
+-		if(!dev->gcCleanupList)
++		if (!dev->gcCleanupList)
+ 			init_failed = 1;
+ 	}
+ 
+-	if (dev->isYaffs2) {
++	if (dev->isYaffs2)
+ 		dev->useHeaderFileSize = 1;
+-	}
+-	if(!init_failed && !yaffs_InitialiseBlocks(dev))
++
++	if (!init_failed && !yaffs_InitialiseBlocks(dev))
+ 		init_failed = 1;
+ 
+ 	yaffs_InitialiseTnodes(dev);
+ 	yaffs_InitialiseObjects(dev);
+ 
+-	if(!init_failed && !yaffs_CreateInitialDirectories(dev))
++	if (!init_failed && !yaffs_CreateInitialDirectories(dev))
+ 		init_failed = 1;
+ 
+ 
+-	if(!init_failed){
++	if (!init_failed) {
+ 		/* Now scan the flash. */
+ 		if (dev->isYaffs2) {
+-			if(yaffs_CheckpointRestore(dev)) {
++			if (yaffs_CheckpointRestore(dev)) {
++				yaffs_CheckObjectDetailsLoaded(dev->rootDir);
+ 				T(YAFFS_TRACE_ALWAYS,
+ 				  (TSTR("yaffs: restored from checkpoint" TENDSTR)));
+ 			} else {
+@@ -7273,24 +7355,25 @@ int yaffs_GutsInitialise(yaffs_Device * 
+ 				dev->nBackgroundDeletions = 0;
+ 				dev->oldestDirtySequence = 0;
+ 
+-				if(!init_failed && !yaffs_InitialiseBlocks(dev))
++				if (!init_failed && !yaffs_InitialiseBlocks(dev))
+ 					init_failed = 1;
+ 
+ 				yaffs_InitialiseTnodes(dev);
+ 				yaffs_InitialiseObjects(dev);
+ 
+-				if(!init_failed && !yaffs_CreateInitialDirectories(dev))
++				if (!init_failed && !yaffs_CreateInitialDirectories(dev))
+ 					init_failed = 1;
+ 
+-				if(!init_failed && !yaffs_ScanBackwards(dev))
++				if (!init_failed && !yaffs_ScanBackwards(dev))
+ 					init_failed = 1;
+ 			}
+-		}else
+-			if(!yaffs_Scan(dev))
++		} else if (!yaffs_Scan(dev))
+ 				init_failed = 1;
++
++		yaffs_StripDeletedObjects(dev);
+ 	}
+ 
+-	if(init_failed){
++	if (init_failed) {
+ 		/* Clean up the mess */
+ 		T(YAFFS_TRACE_TRACING,
+ 		  (TSTR("yaffs: yaffs_GutsInitialise() aborted.\n" TENDSTR)));
+@@ -7318,7 +7401,7 @@ int yaffs_GutsInitialise(yaffs_Device * 
+ 
+ }
+ 
+-void yaffs_Deinitialise(yaffs_Device * dev)
++void yaffs_Deinitialise(yaffs_Device *dev)
+ {
+ 	if (dev->isMounted) {
+ 		int i;
+@@ -7330,7 +7413,7 @@ void yaffs_Deinitialise(yaffs_Device * d
+ 		    dev->srCache) {
+ 
+ 			for (i = 0; i < dev->nShortOpCaches; i++) {
+-				if(dev->srCache[i].data)
++				if (dev->srCache[i].data)
+ 					YFREE(dev->srCache[i].data);
+ 				dev->srCache[i].data = NULL;
+ 			}
+@@ -7341,16 +7424,17 @@ void yaffs_Deinitialise(yaffs_Device * d
+ 
+ 		YFREE(dev->gcCleanupList);
+ 
+-		for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
++		for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++)
+ 			YFREE(dev->tempBuffer[i].buffer);
+-		}
+ 
+ 		dev->isMounted = 0;
+-	}
+ 
++		if (dev->deinitialiseNAND)
++			dev->deinitialiseNAND(dev);
++	}
+ }
+ 
+-static int yaffs_CountFreeChunks(yaffs_Device * dev)
++static int yaffs_CountFreeChunks(yaffs_Device *dev)
+ {
+ 	int nFree;
+ 	int b;
+@@ -7358,7 +7442,7 @@ static int yaffs_CountFreeChunks(yaffs_D
+ 	yaffs_BlockInfo *blk;
+ 
+ 	for (nFree = 0, b = dev->internalStartBlock; b <= dev->internalEndBlock;
+-	     b++) {
++			b++) {
+ 		blk = yaffs_GetBlockInfo(dev, b);
+ 
+ 		switch (blk->blockState) {
+@@ -7373,19 +7457,19 @@ static int yaffs_CountFreeChunks(yaffs_D
+ 		default:
+ 			break;
+ 		}
+-
+ 	}
+ 
+ 	return nFree;
+ }
+ 
+-int yaffs_GetNumberOfFreeChunks(yaffs_Device * dev)
++int yaffs_GetNumberOfFreeChunks(yaffs_Device *dev)
+ {
+ 	/* This is what we report to the outside world */
+ 
+ 	int nFree;
+ 	int nDirtyCacheChunks;
+ 	int blocksForCheckpoint;
++	int i;
+ 
+ #if 1
+ 	nFree = dev->nFreeChunks;
+@@ -7397,12 +7481,9 @@ int yaffs_GetNumberOfFreeChunks(yaffs_De
+ 
+ 	/* Now count the number of dirty chunks in the cache and subtract those */
+ 
+-	{
+-		int i;
+-		for (nDirtyCacheChunks = 0, i = 0; i < dev->nShortOpCaches; i++) {
+-			if (dev->srCache[i].dirty)
+-				nDirtyCacheChunks++;
+-		}
++	for (nDirtyCacheChunks = 0, i = 0; i < dev->nShortOpCaches; i++) {
++		if (dev->srCache[i].dirty)
++			nDirtyCacheChunks++;
+ 	}
+ 
+ 	nFree -= nDirtyCacheChunks;
+@@ -7410,8 +7491,8 @@ int yaffs_GetNumberOfFreeChunks(yaffs_De
+ 	nFree -= ((dev->nReservedBlocks + 1) * dev->nChunksPerBlock);
+ 
+ 	/* Now we figure out how much to reserve for the checkpoint and report that... */
+-	blocksForCheckpoint = dev->nCheckpointReservedBlocks - dev->blocksInCheckpoint;
+-	if(blocksForCheckpoint < 0)
++	blocksForCheckpoint = yaffs_CalcCheckpointBlocksRequired(dev) - dev->blocksInCheckpoint;
++	if (blocksForCheckpoint < 0)
+ 		blocksForCheckpoint = 0;
+ 
+ 	nFree -= (blocksForCheckpoint * dev->nChunksPerBlock);
+@@ -7425,12 +7506,12 @@ int yaffs_GetNumberOfFreeChunks(yaffs_De
+ 
+ static int yaffs_freeVerificationFailures;
+ 
+-static void yaffs_VerifyFreeChunks(yaffs_Device * dev)
++static void yaffs_VerifyFreeChunks(yaffs_Device *dev)
+ {
+ 	int counted;
+ 	int difference;
+ 
+-	if(yaffs_SkipVerification(dev))
++	if (yaffs_SkipVerification(dev))
+ 		return;
+ 
+ 	counted = yaffs_CountFreeChunks(dev);
+@@ -7447,23 +7528,25 @@ static void yaffs_VerifyFreeChunks(yaffs
+ 
+ /*---------------------------------------- YAFFS test code ----------------------*/
+ 
+-#define yaffs_CheckStruct(structure,syze, name) \
+-           if(sizeof(structure) != syze) \
+-	       { \
+-	         T(YAFFS_TRACE_ALWAYS,(TSTR("%s should be %d but is %d\n" TENDSTR),\
+-		 name,syze,sizeof(structure))); \
+-	         return YAFFS_FAIL; \
+-		}
++#define yaffs_CheckStruct(structure, syze, name) \
++	do { \
++		if (sizeof(structure) != syze) { \
++			T(YAFFS_TRACE_ALWAYS, (TSTR("%s should be %d but is %d\n" TENDSTR),\
++				name, syze, sizeof(structure))); \
++			return YAFFS_FAIL; \
++		} \
++	} while (0)
+ 
+ static int yaffs_CheckStructures(void)
+ {
+-/*      yaffs_CheckStruct(yaffs_Tags,8,"yaffs_Tags") */
+-/*      yaffs_CheckStruct(yaffs_TagsUnion,8,"yaffs_TagsUnion") */
+-/*      yaffs_CheckStruct(yaffs_Spare,16,"yaffs_Spare") */
++/*      yaffs_CheckStruct(yaffs_Tags,8,"yaffs_Tags"); */
++/*      yaffs_CheckStruct(yaffs_TagsUnion,8,"yaffs_TagsUnion"); */
++/*      yaffs_CheckStruct(yaffs_Spare,16,"yaffs_Spare"); */
+ #ifndef CONFIG_YAFFS_TNODE_LIST_DEBUG
+-	yaffs_CheckStruct(yaffs_Tnode, 2 * YAFFS_NTNODES_LEVEL0, "yaffs_Tnode")
++	yaffs_CheckStruct(yaffs_Tnode, 2 * YAFFS_NTNODES_LEVEL0, "yaffs_Tnode");
+ #endif
+-	    yaffs_CheckStruct(yaffs_ObjectHeader, 512, "yaffs_ObjectHeader")
+-
+-	    return YAFFS_OK;
++#ifndef CONFIG_YAFFS_WINCE
++	yaffs_CheckStruct(yaffs_ObjectHeader, 512, "yaffs_ObjectHeader");
++#endif
++	return YAFFS_OK;
+ }
+--- a/fs/yaffs2/yaffs_guts.h
++++ b/fs/yaffs2/yaffs_guts.h
+@@ -90,7 +90,7 @@
+ 
+ #define YAFFS_MAX_SHORT_OP_CACHES	20
+ 
+-#define YAFFS_N_TEMP_BUFFERS		4
++#define YAFFS_N_TEMP_BUFFERS		6
+ 
+ /* We limit the number attempts at sucessfully saving a chunk of data.
+  * Small-page devices have 32 pages per block; large-page devices have 64.
+@@ -108,6 +108,9 @@
+ #define YAFFS_LOWEST_SEQUENCE_NUMBER	0x00001000
+ #define YAFFS_HIGHEST_SEQUENCE_NUMBER	0xEFFFFF00
+ 
++/* Special sequence number for bad block that failed to be marked bad */
++#define YAFFS_SEQUENCE_BAD_BLOCK	0xFFFF0000
++
+ /* ChunkCache is used for short read/write operations.*/
+ typedef struct {
+ 	struct yaffs_ObjectStruct *object;
+@@ -134,11 +137,10 @@ typedef struct {
+ typedef struct {
+ 	unsigned chunkId:20;
+ 	unsigned serialNumber:2;
+-	unsigned byteCount:10;
++	unsigned byteCountLSB:10;
+ 	unsigned objectId:18;
+ 	unsigned ecc:12;
+-	unsigned unusedStuff:2;
+-
++	unsigned byteCountMSB:2;
+ } yaffs_Tags;
+ 
+ typedef union {
+@@ -277,13 +279,13 @@ typedef struct {
+ 
+ 	int softDeletions:10;	/* number of soft deleted pages */
+ 	int pagesInUse:10;	/* number of pages in use */
+-	yaffs_BlockState blockState:4;	/* One of the above block states */
++	unsigned blockState:4;	/* One of the above block states. NB use unsigned because enum is sometimes an int */
+ 	__u32 needsRetiring:1;	/* Data has failed on this block, need to get valid data off */
+-                        	/* and retire the block. */
+-	__u32 skipErasedCheck: 1; /* If this is set we can skip the erased check on this block */
+-	__u32 gcPrioritise: 1; 	/* An ECC check or blank check has failed on this block.
++				/* and retire the block. */
++	__u32 skipErasedCheck:1; /* If this is set we can skip the erased check on this block */
++	__u32 gcPrioritise:1; 	/* An ECC check or blank check has failed on this block.
+ 				   It should be prioritised for GC */
+-        __u32 chunkErrorStrikes:3; /* How many times we've had ecc etc failures on this block and tried to reuse it */
++	__u32 chunkErrorStrikes:3; /* How many times we've had ecc etc failures on this block and tried to reuse it */
+ 
+ #ifdef CONFIG_YAFFS_YAFFS2
+ 	__u32 hasShrinkHeader:1; /* This block has at least one shrink object header */
+@@ -300,11 +302,11 @@ typedef struct {
+ 
+ 	/* Apply to everything  */
+ 	int parentObjectId;
+-	__u16 sum__NoLongerUsed;	/* checksum of name. No longer used */
++	__u16 sum__NoLongerUsed;        /* checksum of name. No longer used */
+ 	YCHAR name[YAFFS_MAX_NAME_LENGTH + 1];
+ 
+-	/* Thes following apply to directories, files, symlinks - not hard links */
+-	__u32 yst_mode;		/* protection */
++	/* The following apply to directories, files, symlinks - not hard links */
++	__u32 yst_mode;         /* protection */
+ 
+ #ifdef CONFIG_YAFFS_WINCE
+ 	__u32 notForWinCE[5];
+@@ -331,11 +333,14 @@ typedef struct {
+ 	__u32 win_ctime[2];
+ 	__u32 win_atime[2];
+ 	__u32 win_mtime[2];
+-	__u32 roomToGrow[4];
+ #else
+-	__u32 roomToGrow[10];
++	__u32 roomToGrow[6];
++
+ #endif
++	__u32 inbandShadowsObject;
++	__u32 inbandIsShrink;
+ 
++	__u32 reservedSpace[2];
+ 	int shadowsObject;	/* This object header shadows the specified object if > 0 */
+ 
+ 	/* isShrink applies to object headers written when we shrink the file (ie resize) */
+@@ -381,7 +386,7 @@ typedef struct {
+ } yaffs_FileStructure;
+ 
+ typedef struct {
+-	struct list_head children;	/* list of child links */
++	struct ylist_head children;     /* list of child links */
+ } yaffs_DirectoryStructure;
+ 
+ typedef struct {
+@@ -418,23 +423,24 @@ struct yaffs_ObjectStruct {
+ 				 * still in the inode cache. Free of object is defered.
+ 				 * until the inode is released.
+ 				 */
++	__u8 beingCreated:1;	/* This object is still being created so skip some checks. */
+ 
+ 	__u8 serial;		/* serial number of chunk in NAND. Cached here */
+ 	__u16 sum;		/* sum of the name to speed searching */
+ 
+-	struct yaffs_DeviceStruct *myDev;	/* The device I'm on */
++	struct yaffs_DeviceStruct *myDev;       /* The device I'm on */
+ 
+-	struct list_head hashLink;	/* list of objects in this hash bucket */
++	struct ylist_head hashLink;     /* list of objects in this hash bucket */
+ 
+-	struct list_head hardLinks;	/* all the equivalent hard linked objects */
++	struct ylist_head hardLinks;    /* all the equivalent hard linked objects */
+ 
+ 	/* directory structure stuff */
+ 	/* also used for linking up the free list */
+ 	struct yaffs_ObjectStruct *parent;
+-	struct list_head siblings;
++	struct ylist_head siblings;
+ 
+ 	/* Where's my object header in NAND? */
+-	int chunkId;
++	int hdrChunk;
+ 
+ 	int nDataChunks;	/* Number of data chunks attached to the file. */
+ 
+@@ -485,7 +491,7 @@ struct yaffs_ObjectList_struct {
+ typedef struct yaffs_ObjectList_struct yaffs_ObjectList;
+ 
+ typedef struct {
+-	struct list_head list;
++	struct ylist_head list;
+ 	int count;
+ } yaffs_ObjectBucket;
+ 
+@@ -495,11 +501,10 @@ typedef struct {
+  */
+ 
+ typedef struct {
+-        int structType;
++	int structType;
+ 	__u32 objectId;
+ 	__u32 parentId;
+-	int chunkId;
+-
++	int hdrChunk;
+ 	yaffs_ObjectType variantType:3;
+ 	__u8 deleted:1;
+ 	__u8 softDeleted:1;
+@@ -511,8 +516,7 @@ typedef struct {
+ 
+ 	int nDataChunks;
+ 	__u32 fileSizeOrEquivalentObjectId;
+-
+-}yaffs_CheckpointObject;
++} yaffs_CheckpointObject;
+ 
+ /*--------------------- Temporary buffers ----------------
+  *
+@@ -528,13 +532,13 @@ typedef struct {
+ /*----------------- Device ---------------------------------*/
+ 
+ struct yaffs_DeviceStruct {
+-	struct list_head devList;
++	struct ylist_head devList;
+ 	const char *name;
+ 
+ 	/* Entry parameters set up way early. Yaffs sets up the rest.*/
+ 	int nDataBytesPerChunk;	/* Should be a power of 2 >= 512 */
+ 	int nChunksPerBlock;	/* does not need to be a power of 2 */
+-	int nBytesPerSpare;	/* spare area size */
++	int spareBytesPerChunk;	/* spare area size */
+ 	int startBlock;		/* Start block we're allowed to use */
+ 	int endBlock;		/* End block we're allowed to use */
+ 	int nReservedBlocks;	/* We want this tuneable so that we can reduce */
+@@ -544,9 +548,7 @@ struct yaffs_DeviceStruct {
+ 	/* Stuff used by the shared space checkpointing mechanism */
+ 	/* If this value is zero, then this mechanism is disabled */
+ 
+-	int nCheckpointReservedBlocks; /* Blocks to reserve for checkpoint data */
+-
+-
++/*	int nCheckpointReservedBlocks; */ /* Blocks to reserve for checkpoint data */
+ 
+ 
+ 	int nShortOpCaches;	/* If <= 0, then short op caching is disabled, else
+@@ -560,30 +562,31 @@ struct yaffs_DeviceStruct {
+ 	void *genericDevice;	/* Pointer to device context
+ 				 * On an mtd this holds the mtd pointer.
+ 				 */
+-        void *superBlock;
++	void *superBlock;
+ 
+ 	/* NAND access functions (Must be set before calling YAFFS)*/
+ 
+-	int (*writeChunkToNAND) (struct yaffs_DeviceStruct * dev,
+-				 int chunkInNAND, const __u8 * data,
+-				 const yaffs_Spare * spare);
+-	int (*readChunkFromNAND) (struct yaffs_DeviceStruct * dev,
+-				  int chunkInNAND, __u8 * data,
+-				  yaffs_Spare * spare);
+-	int (*eraseBlockInNAND) (struct yaffs_DeviceStruct * dev,
+-				 int blockInNAND);
+-	int (*initialiseNAND) (struct yaffs_DeviceStruct * dev);
++	int (*writeChunkToNAND) (struct yaffs_DeviceStruct *dev,
++					int chunkInNAND, const __u8 *data,
++					const yaffs_Spare *spare);
++	int (*readChunkFromNAND) (struct yaffs_DeviceStruct *dev,
++					int chunkInNAND, __u8 *data,
++					yaffs_Spare *spare);
++	int (*eraseBlockInNAND) (struct yaffs_DeviceStruct *dev,
++					int blockInNAND);
++	int (*initialiseNAND) (struct yaffs_DeviceStruct *dev);
++	int (*deinitialiseNAND) (struct yaffs_DeviceStruct *dev);
+ 
+ #ifdef CONFIG_YAFFS_YAFFS2
+-	int (*writeChunkWithTagsToNAND) (struct yaffs_DeviceStruct * dev,
+-					 int chunkInNAND, const __u8 * data,
+-					 const yaffs_ExtendedTags * tags);
+-	int (*readChunkWithTagsFromNAND) (struct yaffs_DeviceStruct * dev,
+-					  int chunkInNAND, __u8 * data,
+-					  yaffs_ExtendedTags * tags);
+-	int (*markNANDBlockBad) (struct yaffs_DeviceStruct * dev, int blockNo);
+-	int (*queryNANDBlock) (struct yaffs_DeviceStruct * dev, int blockNo,
+-			       yaffs_BlockState * state, int *sequenceNumber);
++	int (*writeChunkWithTagsToNAND) (struct yaffs_DeviceStruct *dev,
++					 int chunkInNAND, const __u8 *data,
++					 const yaffs_ExtendedTags *tags);
++	int (*readChunkWithTagsFromNAND) (struct yaffs_DeviceStruct *dev,
++					  int chunkInNAND, __u8 *data,
++					  yaffs_ExtendedTags *tags);
++	int (*markNANDBlockBad) (struct yaffs_DeviceStruct *dev, int blockNo);
++	int (*queryNANDBlock) (struct yaffs_DeviceStruct *dev, int blockNo,
++			       yaffs_BlockState *state, __u32 *sequenceNumber);
+ #endif
+ 
+ 	int isYaffs2;
+@@ -595,10 +598,12 @@ struct yaffs_DeviceStruct {
+ 	void (*removeObjectCallback)(struct yaffs_ObjectStruct *obj);
+ 
+ 	/* Callback to mark the superblock dirsty */
+-	void (*markSuperBlockDirty)(void * superblock);
++	void (*markSuperBlockDirty)(void *superblock);
+ 
+ 	int wideTnodesDisabled; /* Set to disable wide tnodes */
+ 
++	YCHAR *pathDividers;	/* String of legal path dividers */
++
+ 
+ 	/* End of stuff that must be set before initialisation. */
+ 
+@@ -615,16 +620,14 @@ struct yaffs_DeviceStruct {
+ 	__u32 tnodeWidth;
+ 	__u32 tnodeMask;
+ 
+-	/* Stuff to support various file offses to chunk/offset translations */
+-	/* "Crumbs" for nDataBytesPerChunk not being a power of 2 */
+-	__u32 crumbMask;
+-	__u32 crumbShift;
+-	__u32 crumbsPerChunk;
+-
+-	/* Straight shifting for nDataBytesPerChunk being a power of 2 */
+-	__u32 chunkShift;
+-	__u32 chunkMask;
+-
++	/* Stuff for figuring out file offset to chunk conversions */
++	__u32 chunkShift; /* Shift value */
++	__u32 chunkDiv;   /* Divisor after shifting: 1 for power-of-2 sizes */
++	__u32 chunkMask;  /* Mask to use for power-of-2 case */
++
++	/* Stuff to handle inband tags */
++	int inbandTags;
++	__u32 totalBytesPerChunk;
+ 
+ #ifdef __KERNEL__
+ 
+@@ -633,7 +636,7 @@ struct yaffs_DeviceStruct {
+ 	__u8 *spareBuffer;	/* For mtdif2 use. Don't know the size of the buffer
+ 				 * at compile time so we have to allocate it.
+ 				 */
+-	void (*putSuperFunc) (struct super_block * sb);
++	void (*putSuperFunc) (struct super_block *sb);
+ #endif
+ 
+ 	int isMounted;
+@@ -663,6 +666,8 @@ struct yaffs_DeviceStruct {
+ 	__u32 checkpointSum;
+ 	__u32 checkpointXor;
+ 
++	int nCheckpointBlocksRequired; /* Number of blocks needed to store current checkpoint set */
++
+ 	/* Block Info */
+ 	yaffs_BlockInfo *blockInfo;
+ 	__u8 *chunkBits;	/* bitmap of chunks in use */
+@@ -684,11 +689,15 @@ struct yaffs_DeviceStruct {
+ 	yaffs_TnodeList *allocatedTnodeList;
+ 
+ 	int isDoingGC;
++	int gcBlock;
++	int gcChunk;
+ 
+ 	int nObjectsCreated;
+ 	yaffs_Object *freeObjects;
+ 	int nFreeObjects;
+ 
++	int nHardLinks;
++
+ 	yaffs_ObjectList *allocatedObjectList;
+ 
+ 	yaffs_ObjectBucket objectBucket[YAFFS_NOBJECT_BUCKETS];
+@@ -745,8 +754,10 @@ struct yaffs_DeviceStruct {
+ 	int nBackgroundDeletions;	/* Count of background deletions. */
+ 
+ 
++	/* Temporary buffer management */
+ 	yaffs_TempBuffer tempBuffer[YAFFS_N_TEMP_BUFFERS];
+ 	int maxTemp;
++	int tempInUse;
+ 	int unmanagedTempAllocations;
+ 	int unmanagedTempDeallocations;
+ 
+@@ -758,9 +769,9 @@ struct yaffs_DeviceStruct {
+ 
+ typedef struct yaffs_DeviceStruct yaffs_Device;
+ 
+-/* The static layout of bllock usage etc is stored in the super block header */
++/* The static layout of block usage etc is stored in the super block header */
+ typedef struct {
+-        int StructType;
++	int StructType;
+ 	int version;
+ 	int checkpointStartBlock;
+ 	int checkpointEndBlock;
+@@ -773,7 +784,7 @@ typedef struct {
+  * must be preserved over unmount/mount cycles.
+  */
+ typedef struct {
+-        int structType;
++	int structType;
+ 	int nErasedBlocks;
+ 	int allocationBlock;	/* Current block being allocated off */
+ 	__u32 allocationPage;
+@@ -791,57 +802,45 @@ typedef struct {
+ 
+ 
+ typedef struct {
+-    int structType;
+-    __u32 magic;
+-    __u32 version;
+-    __u32 head;
++	int structType;
++	__u32 magic;
++	__u32 version;
++	__u32 head;
+ } yaffs_CheckpointValidity;
+ 
+-/* Function to manipulate block info */
+-static Y_INLINE yaffs_BlockInfo *yaffs_GetBlockInfo(yaffs_Device * dev, int blk)
+-{
+-	if (blk < dev->internalStartBlock || blk > dev->internalEndBlock) {
+-		T(YAFFS_TRACE_ERROR,
+-		  (TSTR
+-		   ("**>> yaffs: getBlockInfo block %d is not valid" TENDSTR),
+-		   blk));
+-		YBUG();
+-	}
+-	return &dev->blockInfo[blk - dev->internalStartBlock];
+-}
+ 
+ /*----------------------- YAFFS Functions -----------------------*/
+ 
+-int yaffs_GutsInitialise(yaffs_Device * dev);
+-void yaffs_Deinitialise(yaffs_Device * dev);
++int yaffs_GutsInitialise(yaffs_Device *dev);
++void yaffs_Deinitialise(yaffs_Device *dev);
+ 
+-int yaffs_GetNumberOfFreeChunks(yaffs_Device * dev);
++int yaffs_GetNumberOfFreeChunks(yaffs_Device *dev);
+ 
+-int yaffs_RenameObject(yaffs_Object * oldDir, const YCHAR * oldName,
+-		       yaffs_Object * newDir, const YCHAR * newName);
++int yaffs_RenameObject(yaffs_Object *oldDir, const YCHAR *oldName,
++		       yaffs_Object *newDir, const YCHAR *newName);
+ 
+-int yaffs_Unlink(yaffs_Object * dir, const YCHAR * name);
+-int yaffs_DeleteFile(yaffs_Object * obj);
++int yaffs_Unlink(yaffs_Object *dir, const YCHAR *name);
++int yaffs_DeleteObject(yaffs_Object *obj);
+ 
+-int yaffs_GetObjectName(yaffs_Object * obj, YCHAR * name, int buffSize);
+-int yaffs_GetObjectFileLength(yaffs_Object * obj);
+-int yaffs_GetObjectInode(yaffs_Object * obj);
+-unsigned yaffs_GetObjectType(yaffs_Object * obj);
+-int yaffs_GetObjectLinkCount(yaffs_Object * obj);
++int yaffs_GetObjectName(yaffs_Object *obj, YCHAR *name, int buffSize);
++int yaffs_GetObjectFileLength(yaffs_Object *obj);
++int yaffs_GetObjectInode(yaffs_Object *obj);
++unsigned yaffs_GetObjectType(yaffs_Object *obj);
++int yaffs_GetObjectLinkCount(yaffs_Object *obj);
+ 
+-int yaffs_SetAttributes(yaffs_Object * obj, struct iattr *attr);
+-int yaffs_GetAttributes(yaffs_Object * obj, struct iattr *attr);
++int yaffs_SetAttributes(yaffs_Object *obj, struct iattr *attr);
++int yaffs_GetAttributes(yaffs_Object *obj, struct iattr *attr);
+ 
+ /* File operations */
+-int yaffs_ReadDataFromFile(yaffs_Object * obj, __u8 * buffer, loff_t offset,
+-			   int nBytes);
+-int yaffs_WriteDataToFile(yaffs_Object * obj, const __u8 * buffer, loff_t offset,
+-			  int nBytes, int writeThrough);
+-int yaffs_ResizeFile(yaffs_Object * obj, loff_t newSize);
+-
+-yaffs_Object *yaffs_MknodFile(yaffs_Object * parent, const YCHAR * name,
+-			      __u32 mode, __u32 uid, __u32 gid);
+-int yaffs_FlushFile(yaffs_Object * obj, int updateTime);
++int yaffs_ReadDataFromFile(yaffs_Object *obj, __u8 *buffer, loff_t offset,
++				int nBytes);
++int yaffs_WriteDataToFile(yaffs_Object *obj, const __u8 *buffer, loff_t offset,
++				int nBytes, int writeThrough);
++int yaffs_ResizeFile(yaffs_Object *obj, loff_t newSize);
++
++yaffs_Object *yaffs_MknodFile(yaffs_Object *parent, const YCHAR *name,
++				__u32 mode, __u32 uid, __u32 gid);
++int yaffs_FlushFile(yaffs_Object *obj, int updateTime);
+ 
+ /* Flushing and checkpointing */
+ void yaffs_FlushEntireDeviceCache(yaffs_Device *dev);
+@@ -850,33 +849,33 @@ int yaffs_CheckpointSave(yaffs_Device *d
+ int yaffs_CheckpointRestore(yaffs_Device *dev);
+ 
+ /* Directory operations */
+-yaffs_Object *yaffs_MknodDirectory(yaffs_Object * parent, const YCHAR * name,
+-				   __u32 mode, __u32 uid, __u32 gid);
+-yaffs_Object *yaffs_FindObjectByName(yaffs_Object * theDir, const YCHAR * name);
+-int yaffs_ApplyToDirectoryChildren(yaffs_Object * theDir,
++yaffs_Object *yaffs_MknodDirectory(yaffs_Object *parent, const YCHAR *name,
++				__u32 mode, __u32 uid, __u32 gid);
++yaffs_Object *yaffs_FindObjectByName(yaffs_Object *theDir, const YCHAR *name);
++int yaffs_ApplyToDirectoryChildren(yaffs_Object *theDir,
+ 				   int (*fn) (yaffs_Object *));
+ 
+-yaffs_Object *yaffs_FindObjectByNumber(yaffs_Device * dev, __u32 number);
++yaffs_Object *yaffs_FindObjectByNumber(yaffs_Device *dev, __u32 number);
+ 
+ /* Link operations */
+-yaffs_Object *yaffs_Link(yaffs_Object * parent, const YCHAR * name,
+-			 yaffs_Object * equivalentObject);
++yaffs_Object *yaffs_Link(yaffs_Object *parent, const YCHAR *name,
++			 yaffs_Object *equivalentObject);
+ 
+-yaffs_Object *yaffs_GetEquivalentObject(yaffs_Object * obj);
++yaffs_Object *yaffs_GetEquivalentObject(yaffs_Object *obj);
+ 
+ /* Symlink operations */
+-yaffs_Object *yaffs_MknodSymLink(yaffs_Object * parent, const YCHAR * name,
++yaffs_Object *yaffs_MknodSymLink(yaffs_Object *parent, const YCHAR *name,
+ 				 __u32 mode, __u32 uid, __u32 gid,
+-				 const YCHAR * alias);
+-YCHAR *yaffs_GetSymlinkAlias(yaffs_Object * obj);
++				 const YCHAR *alias);
++YCHAR *yaffs_GetSymlinkAlias(yaffs_Object *obj);
+ 
+ /* Special inodes (fifos, sockets and devices) */
+-yaffs_Object *yaffs_MknodSpecial(yaffs_Object * parent, const YCHAR * name,
++yaffs_Object *yaffs_MknodSpecial(yaffs_Object *parent, const YCHAR *name,
+ 				 __u32 mode, __u32 uid, __u32 gid, __u32 rdev);
+ 
+ /* Special directories */
+-yaffs_Object *yaffs_Root(yaffs_Device * dev);
+-yaffs_Object *yaffs_LostNFound(yaffs_Device * dev);
++yaffs_Object *yaffs_Root(yaffs_Device *dev);
++yaffs_Object *yaffs_LostNFound(yaffs_Device *dev);
+ 
+ #ifdef CONFIG_YAFFS_WINCE
+ /* CONFIG_YAFFS_WINCE special stuff */
+@@ -885,18 +884,21 @@ void yfsd_WinFileTimeNow(__u32 target[2]
+ 
+ #ifdef __KERNEL__
+ 
+-void yaffs_HandleDeferedFree(yaffs_Object * obj);
++void yaffs_HandleDeferedFree(yaffs_Object *obj);
+ #endif
+ 
+ /* Debug dump  */
+-int yaffs_DumpObject(yaffs_Object * obj);
++int yaffs_DumpObject(yaffs_Object *obj);
+ 
+-void yaffs_GutsTest(yaffs_Device * dev);
++void yaffs_GutsTest(yaffs_Device *dev);
+ 
+ /* A few useful functions */
+-void yaffs_InitialiseTags(yaffs_ExtendedTags * tags);
+-void yaffs_DeleteChunk(yaffs_Device * dev, int chunkId, int markNAND, int lyn);
+-int yaffs_CheckFF(__u8 * buffer, int nBytes);
++void yaffs_InitialiseTags(yaffs_ExtendedTags *tags);
++void yaffs_DeleteChunk(yaffs_Device *dev, int chunkId, int markNAND, int lyn);
++int yaffs_CheckFF(__u8 *buffer, int nBytes);
+ void yaffs_HandleChunkError(yaffs_Device *dev, yaffs_BlockInfo *bi);
+ 
++__u8 *yaffs_GetTempBuffer(yaffs_Device *dev, int lineNo);
++void yaffs_ReleaseTempBuffer(yaffs_Device *dev, __u8 *buffer, int lineNo);
++
+ #endif
+--- a/fs/yaffs2/yaffs_mtdif1.c
++++ b/fs/yaffs2/yaffs_mtdif1.c
+@@ -26,7 +26,7 @@
+ #include "yportenv.h"
+ #include "yaffs_guts.h"
+ #include "yaffs_packedtags1.h"
+-#include "yaffs_tagscompat.h"	// for yaffs_CalcTagsECC
++#include "yaffs_tagscompat.h"	/* for yaffs_CalcTagsECC */
+ 
+ #include "linux/kernel.h"
+ #include "linux/version.h"
+@@ -34,9 +34,9 @@
+ #include "linux/mtd/mtd.h"
+ 
+ /* Don't compile this module if we don't have MTD's mtd_oob_ops interface */
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 
+-const char *yaffs_mtdif1_c_version = "$Id: yaffs_mtdif1.c,v 1.3 2007/05/15 20:16:11 ian Exp $";
++const char *yaffs_mtdif1_c_version = "$Id: yaffs_mtdif1.c,v 1.10 2009-03-09 07:41:10 charles Exp $";
+ 
+ #ifndef CONFIG_YAFFS_9BYTE_TAGS
+ # define YTAG1_SIZE 8
+@@ -89,9 +89,9 @@ static struct nand_ecclayout nand_oob_16
+  * Returns YAFFS_OK or YAFFS_FAIL.
+  */
+ int nandmtd1_WriteChunkWithTagsToNAND(yaffs_Device *dev,
+-	int chunkInNAND, const __u8 * data, const yaffs_ExtendedTags * etags)
++	int chunkInNAND, const __u8 *data, const yaffs_ExtendedTags *etags)
+ {
+-	struct mtd_info * mtd = dev->genericDevice;
++	struct mtd_info *mtd = dev->genericDevice;
+ 	int chunkBytes = dev->nDataBytesPerChunk;
+ 	loff_t addr = ((loff_t)chunkInNAND) * chunkBytes;
+ 	struct mtd_oob_ops ops;
+@@ -146,7 +146,7 @@ int nandmtd1_WriteChunkWithTagsToNAND(ya
+ 
+ /* Return with empty ExtendedTags but add eccResult.
+  */
+-static int rettags(yaffs_ExtendedTags * etags, int eccResult, int retval)
++static int rettags(yaffs_ExtendedTags *etags, int eccResult, int retval)
+ {
+ 	if (etags) {
+ 		memset(etags, 0, sizeof(*etags));
+@@ -169,9 +169,9 @@ static int rettags(yaffs_ExtendedTags * 
+  * Returns YAFFS_OK or YAFFS_FAIL.
+  */
+ int nandmtd1_ReadChunkWithTagsFromNAND(yaffs_Device *dev,
+-	int chunkInNAND, __u8 * data, yaffs_ExtendedTags * etags)
++	int chunkInNAND, __u8 *data, yaffs_ExtendedTags *etags)
+ {
+-	struct mtd_info * mtd = dev->genericDevice;
++	struct mtd_info *mtd = dev->genericDevice;
+ 	int chunkBytes = dev->nDataBytesPerChunk;
+ 	loff_t addr = ((loff_t)chunkInNAND) * chunkBytes;
+ 	int eccres = YAFFS_ECC_RESULT_NO_ERROR;
+@@ -189,7 +189,7 @@ int nandmtd1_ReadChunkWithTagsFromNAND(y
+ 	ops.datbuf = data;
+ 	ops.oobbuf = (__u8 *)&pt1;
+ 
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20))
++#if (MTD_VERSION_CODE < MTD_VERSION(2, 6, 20))
+ 	/* In MTD 2.6.18 to 2.6.19 nand_base.c:nand_do_read_oob() has a bug;
+ 	 * help it out with ops.len = ops.ooblen when ops.datbuf == NULL.
+ 	 */
+@@ -284,11 +284,11 @@ int nandmtd1_ReadChunkWithTagsFromNAND(y
+  */
+ int nandmtd1_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo)
+ {
+-	struct mtd_info * mtd = dev->genericDevice;
++	struct mtd_info *mtd = dev->genericDevice;
+ 	int blocksize = dev->nChunksPerBlock * dev->nDataBytesPerChunk;
+ 	int retval;
+ 
+-	yaffs_trace(YAFFS_TRACE_BAD_BLOCKS, "marking block %d bad", blockNo);
++	yaffs_trace(YAFFS_TRACE_BAD_BLOCKS, "marking block %d bad\n", blockNo);
+ 
+ 	retval = mtd->block_markbad(mtd, (loff_t)blocksize * blockNo);
+ 	return (retval) ? YAFFS_FAIL : YAFFS_OK;
+@@ -298,7 +298,7 @@ int nandmtd1_MarkNANDBlockBad(struct yaf
+  *
+  * Returns YAFFS_OK or YAFFS_FAIL.
+  */
+-static int nandmtd1_TestPrerequists(struct mtd_info * mtd)
++static int nandmtd1_TestPrerequists(struct mtd_info *mtd)
+ {
+ 	/* 2.6.18 has mtd->ecclayout->oobavail */
+ 	/* 2.6.21 has mtd->ecclayout->oobavail and mtd->oobavail */
+@@ -323,10 +323,11 @@ static int nandmtd1_TestPrerequists(stru
+  * Always returns YAFFS_OK.
+  */
+ int nandmtd1_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+-	yaffs_BlockState * pState, int *pSequenceNumber)
++	yaffs_BlockState *pState, __u32 *pSequenceNumber)
+ {
+-	struct mtd_info * mtd = dev->genericDevice;
++	struct mtd_info *mtd = dev->genericDevice;
+ 	int chunkNo = blockNo * dev->nChunksPerBlock;
++	loff_t addr = (loff_t)chunkNo * dev->nDataBytesPerChunk;
+ 	yaffs_ExtendedTags etags;
+ 	int state = YAFFS_BLOCK_STATE_DEAD;
+ 	int seqnum = 0;
+@@ -335,21 +336,22 @@ int nandmtd1_QueryNANDBlock(struct yaffs
+ 	/* We don't yet have a good place to test for MTD config prerequists.
+ 	 * Do it here as we are called during the initial scan.
+ 	 */
+-	if (nandmtd1_TestPrerequists(mtd) != YAFFS_OK) {
++	if (nandmtd1_TestPrerequists(mtd) != YAFFS_OK)
+ 		return YAFFS_FAIL;
+-	}
+ 
+ 	retval = nandmtd1_ReadChunkWithTagsFromNAND(dev, chunkNo, NULL, &etags);
++	etags.blockBad = (mtd->block_isbad)(mtd, addr);
+ 	if (etags.blockBad) {
+ 		yaffs_trace(YAFFS_TRACE_BAD_BLOCKS,
+-			"block %d is marked bad", blockNo);
++			"block %d is marked bad\n", blockNo);
+ 		state = YAFFS_BLOCK_STATE_DEAD;
+-	}
+-	else if (etags.chunkUsed) {
++	} else if (etags.eccResult != YAFFS_ECC_RESULT_NO_ERROR) {
++		/* bad tags, need to look more closely */
++		state = YAFFS_BLOCK_STATE_NEEDS_SCANNING;
++	} else if (etags.chunkUsed) {
+ 		state = YAFFS_BLOCK_STATE_NEEDS_SCANNING;
+ 		seqnum = etags.sequenceNumber;
+-	}
+-	else {
++	} else {
+ 		state = YAFFS_BLOCK_STATE_EMPTY;
+ 	}
+ 
+@@ -360,4 +362,4 @@ int nandmtd1_QueryNANDBlock(struct yaffs
+ 	return YAFFS_OK;
+ }
+ 
+-#endif /*KERNEL_VERSION*/
++#endif /*MTD_VERSION*/
+--- a/fs/yaffs2/yaffs_mtdif1.h
++++ b/fs/yaffs2/yaffs_mtdif1.h
+@@ -14,15 +14,15 @@
+ #ifndef __YAFFS_MTDIF1_H__
+ #define __YAFFS_MTDIF1_H__
+ 
+-int nandmtd1_WriteChunkWithTagsToNAND(yaffs_Device * dev, int chunkInNAND,
+-	const __u8 * data, const yaffs_ExtendedTags * tags);
++int nandmtd1_WriteChunkWithTagsToNAND(yaffs_Device *dev, int chunkInNAND,
++	const __u8 *data, const yaffs_ExtendedTags *tags);
+ 
+-int nandmtd1_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+-	__u8 * data, yaffs_ExtendedTags * tags);
++int nandmtd1_ReadChunkWithTagsFromNAND(yaffs_Device *dev, int chunkInNAND,
++	__u8 *data, yaffs_ExtendedTags *tags);
+ 
+ int nandmtd1_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo);
+ 
+ int nandmtd1_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+-	yaffs_BlockState * state, int *sequenceNumber);
++	yaffs_BlockState *state, __u32 *sequenceNumber);
+ 
+ #endif
+--- a/fs/yaffs2/yaffs_mtdif2.c
++++ b/fs/yaffs2/yaffs_mtdif2.c
+@@ -14,7 +14,7 @@
+ /* mtd interface for YAFFS2 */
+ 
+ const char *yaffs_mtdif2_c_version =
+-    "$Id: yaffs_mtdif2.c,v 1.17 2007-02-14 01:09:06 wookey Exp $";
++	"$Id: yaffs_mtdif2.c,v 1.23 2009-03-06 17:20:53 wookey Exp $";
+ 
+ #include "yportenv.h"
+ 
+@@ -27,19 +27,23 @@ const char *yaffs_mtdif2_c_version =
+ 
+ #include "yaffs_packedtags2.h"
+ 
+-int nandmtd2_WriteChunkWithTagsToNAND(yaffs_Device * dev, int chunkInNAND,
+-				      const __u8 * data,
+-				      const yaffs_ExtendedTags * tags)
++/* NB For use with inband tags....
++ * We assume that the data buffer is of size totalBytersPerChunk so that we can also
++ * use it to load the tags.
++ */
++int nandmtd2_WriteChunkWithTagsToNAND(yaffs_Device *dev, int chunkInNAND,
++				      const __u8 *data,
++				      const yaffs_ExtendedTags *tags)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	struct mtd_oob_ops ops;
+ #else
+ 	size_t dummy;
+ #endif
+ 	int retval = 0;
+ 
+-	loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
++	loff_t addr;
+ 
+ 	yaffs_PackedTags2 pt;
+ 
+@@ -48,46 +52,40 @@ int nandmtd2_WriteChunkWithTagsToNAND(ya
+ 	   ("nandmtd2_WriteChunkWithTagsToNAND chunk %d data %p tags %p"
+ 	    TENDSTR), chunkInNAND, data, tags));
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-	if (tags)
+-		yaffs_PackTags2(&pt, tags);
+-	else
+-		BUG(); /* both tags and data should always be present */
+ 
+-	if (data) {
+-		ops.mode = MTD_OOB_AUTO;
+-		ops.ooblen = sizeof(pt);
+-		ops.len = dev->nDataBytesPerChunk;
+-		ops.ooboffs = 0;
+-		ops.datbuf = (__u8 *)data;
+-		ops.oobbuf = (void *)&pt;
+-		retval = mtd->write_oob(mtd, addr, &ops);
++	addr  = ((loff_t) chunkInNAND) * dev->totalBytesPerChunk;
++
++	/* For yaffs2 writing there must be both data and tags.
++	 * If we're using inband tags, then the tags are stuffed into
++	 * the end of the data buffer.
++	 */
++	if (!data || !tags)
++		BUG();
++	else if (dev->inbandTags) {
++		yaffs_PackedTags2TagsPart *pt2tp;
++		pt2tp = (yaffs_PackedTags2TagsPart *)(data + dev->nDataBytesPerChunk);
++		yaffs_PackTags2TagsPart(pt2tp, tags);
+ 	} else
+-		BUG(); /* both tags and data should always be present */
+-#else
+-	if (tags) {
+ 		yaffs_PackTags2(&pt, tags);
+-	}
+ 
+-	if (data && tags) {
+-		if (dev->useNANDECC)
+-			retval =
+-			    mtd->write_ecc(mtd, addr, dev->nDataBytesPerChunk,
+-					   &dummy, data, (__u8 *) & pt, NULL);
+-		else
+-			retval =
+-			    mtd->write_ecc(mtd, addr, dev->nDataBytesPerChunk,
+-					   &dummy, data, (__u8 *) & pt, NULL);
+-	} else {
+-		if (data)
+-			retval =
+-			    mtd->write(mtd, addr, dev->nDataBytesPerChunk, &dummy,
+-				       data);
+-		if (tags)
+-			retval =
+-			    mtd->write_oob(mtd, addr, mtd->oobsize, &dummy,
+-					   (__u8 *) & pt);
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
++	ops.mode = MTD_OOB_AUTO;
++	ops.ooblen = (dev->inbandTags) ? 0 : sizeof(pt);
++	ops.len = dev->totalBytesPerChunk;
++	ops.ooboffs = 0;
++	ops.datbuf = (__u8 *)data;
++	ops.oobbuf = (dev->inbandTags) ? NULL : (void *)&pt;
++	retval = mtd->write_oob(mtd, addr, &ops);
+ 
++#else
++	if (!dev->inbandTags) {
++		retval =
++		    mtd->write_ecc(mtd, addr, dev->nDataBytesPerChunk,
++				   &dummy, data, (__u8 *) &pt, NULL);
++	} else {
++		retval =
++		    mtd->write(mtd, addr, dev->totalBytesPerChunk, &dummy,
++			       data);
+ 	}
+ #endif
+ 
+@@ -97,17 +95,18 @@ int nandmtd2_WriteChunkWithTagsToNAND(ya
+ 		return YAFFS_FAIL;
+ }
+ 
+-int nandmtd2_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+-				       __u8 * data, yaffs_ExtendedTags * tags)
++int nandmtd2_ReadChunkWithTagsFromNAND(yaffs_Device *dev, int chunkInNAND,
++				       __u8 *data, yaffs_ExtendedTags *tags)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	struct mtd_oob_ops ops;
+ #endif
+ 	size_t dummy;
+ 	int retval = 0;
++	int localData = 0;
+ 
+-	loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
++	loff_t addr = ((loff_t) chunkInNAND) * dev->totalBytesPerChunk;
+ 
+ 	yaffs_PackedTags2 pt;
+ 
+@@ -116,9 +115,20 @@ int nandmtd2_ReadChunkWithTagsFromNAND(y
+ 	   ("nandmtd2_ReadChunkWithTagsFromNAND chunk %d data %p tags %p"
+ 	    TENDSTR), chunkInNAND, data, tags));
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-	if (data && !tags)
+-		retval = mtd->read(mtd, addr, dev->nDataBytesPerChunk,
++	if (dev->inbandTags) {
++
++		if (!data) {
++			localData = 1;
++			data = yaffs_GetTempBuffer(dev, __LINE__);
++		}
++
++
++	}
++
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
++	if (dev->inbandTags || (data && !tags))
++		retval = mtd->read(mtd, addr, dev->totalBytesPerChunk,
+ 				&dummy, data);
+ 	else if (tags) {
+ 		ops.mode = MTD_OOB_AUTO;
+@@ -130,38 +140,42 @@ int nandmtd2_ReadChunkWithTagsFromNAND(y
+ 		retval = mtd->read_oob(mtd, addr, &ops);
+ 	}
+ #else
+-	if (data && tags) {
+-		if (dev->useNANDECC) {
+-			retval =
+-			    mtd->read_ecc(mtd, addr, dev->nDataBytesPerChunk,
+-					  &dummy, data, dev->spareBuffer,
+-					  NULL);
+-		} else {
+-			retval =
+-			    mtd->read_ecc(mtd, addr, dev->nDataBytesPerChunk,
++	if (!dev->inbandTags && data && tags) {
++
++		retval = mtd->read_ecc(mtd, addr, dev->nDataBytesPerChunk,
+ 					  &dummy, data, dev->spareBuffer,
+ 					  NULL);
+-		}
+ 	} else {
+ 		if (data)
+ 			retval =
+ 			    mtd->read(mtd, addr, dev->nDataBytesPerChunk, &dummy,
+ 				      data);
+-		if (tags)
++		if (!dev->inbandTags && tags)
+ 			retval =
+ 			    mtd->read_oob(mtd, addr, mtd->oobsize, &dummy,
+ 					  dev->spareBuffer);
+ 	}
+ #endif
+ 
+-	memcpy(&pt, dev->spareBuffer, sizeof(pt));
+ 
+-	if (tags)
+-		yaffs_UnpackTags2(tags, &pt);
++	if (dev->inbandTags) {
++		if (tags) {
++			yaffs_PackedTags2TagsPart *pt2tp;
++			pt2tp = (yaffs_PackedTags2TagsPart *)&data[dev->nDataBytesPerChunk];
++			yaffs_UnpackTags2TagsPart(tags, pt2tp);
++		}
++	} else {
++		if (tags) {
++			memcpy(&pt, dev->spareBuffer, sizeof(pt));
++			yaffs_UnpackTags2(tags, &pt);
++		}
++	}
+ 
+-	if(tags && retval == -EBADMSG && tags->eccResult == YAFFS_ECC_RESULT_NO_ERROR)
+-		tags->eccResult = YAFFS_ECC_RESULT_UNFIXED;
++	if (localData)
++		yaffs_ReleaseTempBuffer(dev, data, __LINE__);
+ 
++	if (tags && retval == -EBADMSG && tags->eccResult == YAFFS_ECC_RESULT_NO_ERROR)
++		tags->eccResult = YAFFS_ECC_RESULT_UNFIXED;
+ 	if (retval == 0)
+ 		return YAFFS_OK;
+ 	else
+@@ -178,7 +192,7 @@ int nandmtd2_MarkNANDBlockBad(struct yaf
+ 	retval =
+ 	    mtd->block_markbad(mtd,
+ 			       blockNo * dev->nChunksPerBlock *
+-			       dev->nDataBytesPerChunk);
++			       dev->totalBytesPerChunk);
+ 
+ 	if (retval == 0)
+ 		return YAFFS_OK;
+@@ -188,7 +202,7 @@ int nandmtd2_MarkNANDBlockBad(struct yaf
+ }
+ 
+ int nandmtd2_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+-			    yaffs_BlockState * state, int *sequenceNumber)
++			    yaffs_BlockState *state, __u32 *sequenceNumber)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+ 	int retval;
+@@ -198,7 +212,7 @@ int nandmtd2_QueryNANDBlock(struct yaffs
+ 	retval =
+ 	    mtd->block_isbad(mtd,
+ 			     blockNo * dev->nChunksPerBlock *
+-			     dev->nDataBytesPerChunk);
++			     dev->totalBytesPerChunk);
+ 
+ 	if (retval) {
+ 		T(YAFFS_TRACE_MTD, (TSTR("block is bad" TENDSTR)));
+--- a/fs/yaffs2/yaffs_mtdif2.h
++++ b/fs/yaffs2/yaffs_mtdif2.h
+@@ -17,13 +17,13 @@
+ #define __YAFFS_MTDIF2_H__
+ 
+ #include "yaffs_guts.h"
+-int nandmtd2_WriteChunkWithTagsToNAND(yaffs_Device * dev, int chunkInNAND,
+-				      const __u8 * data,
+-				      const yaffs_ExtendedTags * tags);
+-int nandmtd2_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+-				       __u8 * data, yaffs_ExtendedTags * tags);
++int nandmtd2_WriteChunkWithTagsToNAND(yaffs_Device *dev, int chunkInNAND,
++				const __u8 *data,
++				const yaffs_ExtendedTags *tags);
++int nandmtd2_ReadChunkWithTagsFromNAND(yaffs_Device *dev, int chunkInNAND,
++				__u8 *data, yaffs_ExtendedTags *tags);
+ int nandmtd2_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo);
+ int nandmtd2_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+-			    yaffs_BlockState * state, int *sequenceNumber);
++			yaffs_BlockState *state, __u32 *sequenceNumber);
+ 
+ #endif
+--- a/fs/yaffs2/yaffs_mtdif.c
++++ b/fs/yaffs2/yaffs_mtdif.c
+@@ -12,7 +12,7 @@
+  */
+ 
+ const char *yaffs_mtdif_c_version =
+-    "$Id: yaffs_mtdif.c,v 1.19 2007-02-14 01:09:06 wookey Exp $";
++	"$Id: yaffs_mtdif.c,v 1.22 2009-03-06 17:20:51 wookey Exp $";
+ 
+ #include "yportenv.h"
+ 
+@@ -24,7 +24,7 @@ const char *yaffs_mtdif_c_version =
+ #include "linux/time.h"
+ #include "linux/mtd/nand.h"
+ 
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18))
++#if (MTD_VERSION_CODE < MTD_VERSION(2, 6, 18))
+ static struct nand_oobinfo yaffs_oobinfo = {
+ 	.useecc = 1,
+ 	.eccbytes = 6,
+@@ -36,7 +36,7 @@ static struct nand_oobinfo yaffs_noeccin
+ };
+ #endif
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ static inline void translate_spare2oob(const yaffs_Spare *spare, __u8 *oob)
+ {
+ 	oob[0] = spare->tagByte0;
+@@ -45,8 +45,8 @@ static inline void translate_spare2oob(c
+ 	oob[3] = spare->tagByte3;
+ 	oob[4] = spare->tagByte4;
+ 	oob[5] = spare->tagByte5 & 0x3f;
+-	oob[5] |= spare->blockStatus == 'Y' ? 0: 0x80;
+-	oob[5] |= spare->pageStatus == 0 ? 0: 0x40;
++	oob[5] |= spare->blockStatus == 'Y' ? 0 : 0x80;
++	oob[5] |= spare->pageStatus == 0 ? 0 : 0x40;
+ 	oob[6] = spare->tagByte6;
+ 	oob[7] = spare->tagByte7;
+ }
+@@ -71,18 +71,18 @@ static inline void translate_oob2spare(y
+ }
+ #endif
+ 
+-int nandmtd_WriteChunkToNAND(yaffs_Device * dev, int chunkInNAND,
+-			     const __u8 * data, const yaffs_Spare * spare)
++int nandmtd_WriteChunkToNAND(yaffs_Device *dev, int chunkInNAND,
++			     const __u8 *data, const yaffs_Spare *spare)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	struct mtd_oob_ops ops;
+ #endif
+ 	size_t dummy;
+ 	int retval = 0;
+ 
+ 	loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	__u8 spareAsBytes[8]; /* OOB */
+ 
+ 	if (data && !spare)
+@@ -135,18 +135,18 @@ int nandmtd_WriteChunkToNAND(yaffs_Devic
+ 		return YAFFS_FAIL;
+ }
+ 
+-int nandmtd_ReadChunkFromNAND(yaffs_Device * dev, int chunkInNAND, __u8 * data,
+-			      yaffs_Spare * spare)
++int nandmtd_ReadChunkFromNAND(yaffs_Device *dev, int chunkInNAND, __u8 *data,
++			      yaffs_Spare *spare)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	struct mtd_oob_ops ops;
+ #endif
+ 	size_t dummy;
+ 	int retval = 0;
+ 
+ 	loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	__u8 spareAsBytes[8]; /* OOB */
+ 
+ 	if (data && !spare)
+@@ -205,7 +205,7 @@ int nandmtd_ReadChunkFromNAND(yaffs_Devi
+ 		return YAFFS_FAIL;
+ }
+ 
+-int nandmtd_EraseBlockInNAND(yaffs_Device * dev, int blockNumber)
++int nandmtd_EraseBlockInNAND(yaffs_Device *dev, int blockNumber)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+ 	__u32 addr =
+@@ -234,7 +234,7 @@ int nandmtd_EraseBlockInNAND(yaffs_Devic
+ 		return YAFFS_FAIL;
+ }
+ 
+-int nandmtd_InitialiseNAND(yaffs_Device * dev)
++int nandmtd_InitialiseNAND(yaffs_Device *dev)
+ {
+ 	return YAFFS_OK;
+ }
+--- a/fs/yaffs2/yaffs_mtdif.h
++++ b/fs/yaffs2/yaffs_mtdif.h
+@@ -18,10 +18,15 @@
+ 
+ #include "yaffs_guts.h"
+ 
+-int nandmtd_WriteChunkToNAND(yaffs_Device * dev, int chunkInNAND,
+-			     const __u8 * data, const yaffs_Spare * spare);
+-int nandmtd_ReadChunkFromNAND(yaffs_Device * dev, int chunkInNAND, __u8 * data,
+-			      yaffs_Spare * spare);
+-int nandmtd_EraseBlockInNAND(yaffs_Device * dev, int blockNumber);
+-int nandmtd_InitialiseNAND(yaffs_Device * dev);
++#if (MTD_VERSION_CODE < MTD_VERSION(2, 6, 18))
++extern struct nand_oobinfo yaffs_oobinfo;
++extern struct nand_oobinfo yaffs_noeccinfo;
++#endif
++
++int nandmtd_WriteChunkToNAND(yaffs_Device *dev, int chunkInNAND,
++			const __u8 *data, const yaffs_Spare *spare);
++int nandmtd_ReadChunkFromNAND(yaffs_Device *dev, int chunkInNAND, __u8 *data,
++			yaffs_Spare *spare);
++int nandmtd_EraseBlockInNAND(yaffs_Device *dev, int blockNumber);
++int nandmtd_InitialiseNAND(yaffs_Device *dev);
+ #endif
+--- a/fs/yaffs2/yaffs_nand.c
++++ b/fs/yaffs2/yaffs_nand.c
+@@ -12,16 +12,17 @@
+  */
+ 
+ const char *yaffs_nand_c_version =
+-    "$Id: yaffs_nand.c,v 1.7 2007-02-14 01:09:06 wookey Exp $";
++	"$Id: yaffs_nand.c,v 1.10 2009-03-06 17:20:54 wookey Exp $";
+ 
+ #include "yaffs_nand.h"
+ #include "yaffs_tagscompat.h"
+ #include "yaffs_tagsvalidity.h"
+ 
++#include "yaffs_getblockinfo.h"
+ 
+-int yaffs_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+-					   __u8 * buffer,
+-					   yaffs_ExtendedTags * tags)
++int yaffs_ReadChunkWithTagsFromNAND(yaffs_Device *dev, int chunkInNAND,
++					   __u8 *buffer,
++					   yaffs_ExtendedTags *tags)
+ {
+ 	int result;
+ 	yaffs_ExtendedTags localTags;
+@@ -29,7 +30,7 @@ int yaffs_ReadChunkWithTagsFromNAND(yaff
+ 	int realignedChunkInNAND = chunkInNAND - dev->chunkOffset;
+ 
+ 	/* If there are no tags provided, use local tags to get prioritised gc working */
+-	if(!tags)
++	if (!tags)
+ 		tags = &localTags;
+ 
+ 	if (dev->readChunkWithTagsFromNAND)
+@@ -40,20 +41,20 @@ int yaffs_ReadChunkWithTagsFromNAND(yaff
+ 									realignedChunkInNAND,
+ 									buffer,
+ 									tags);
+-	if(tags &&
+-	   tags->eccResult > YAFFS_ECC_RESULT_NO_ERROR){
++	if (tags &&
++	   tags->eccResult > YAFFS_ECC_RESULT_NO_ERROR) {
+ 
+ 		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, chunkInNAND/dev->nChunksPerBlock);
+-                yaffs_HandleChunkError(dev,bi);
++		yaffs_HandleChunkError(dev, bi);
+ 	}
+ 
+ 	return result;
+ }
+ 
+-int yaffs_WriteChunkWithTagsToNAND(yaffs_Device * dev,
++int yaffs_WriteChunkWithTagsToNAND(yaffs_Device *dev,
+ 						   int chunkInNAND,
+-						   const __u8 * buffer,
+-						   yaffs_ExtendedTags * tags)
++						   const __u8 *buffer,
++						   yaffs_ExtendedTags *tags)
+ {
+ 	chunkInNAND -= dev->chunkOffset;
+ 
+@@ -84,7 +85,7 @@ int yaffs_WriteChunkWithTagsToNAND(yaffs
+ 								       tags);
+ }
+ 
+-int yaffs_MarkBlockBad(yaffs_Device * dev, int blockNo)
++int yaffs_MarkBlockBad(yaffs_Device *dev, int blockNo)
+ {
+ 	blockNo -= dev->blockOffset;
+ 
+@@ -95,10 +96,10 @@ int yaffs_MarkBlockBad(yaffs_Device * de
+ 		return yaffs_TagsCompatabilityMarkNANDBlockBad(dev, blockNo);
+ }
+ 
+-int yaffs_QueryInitialBlockState(yaffs_Device * dev,
++int yaffs_QueryInitialBlockState(yaffs_Device *dev,
+ 						 int blockNo,
+-						 yaffs_BlockState * state,
+-						 unsigned *sequenceNumber)
++						 yaffs_BlockState *state,
++						 __u32 *sequenceNumber)
+ {
+ 	blockNo -= dev->blockOffset;
+ 
+--- a/fs/yaffs2/yaffs_nandemul2k.h
++++ b/fs/yaffs2/yaffs_nandemul2k.h
+@@ -21,14 +21,14 @@
+ #include "yaffs_guts.h"
+ 
+ int nandemul2k_WriteChunkWithTagsToNAND(struct yaffs_DeviceStruct *dev,
+-					int chunkInNAND, const __u8 * data,
+-					yaffs_ExtendedTags * tags);
++					int chunkInNAND, const __u8 *data,
++					const yaffs_ExtendedTags *tags);
+ int nandemul2k_ReadChunkWithTagsFromNAND(struct yaffs_DeviceStruct *dev,
+-					 int chunkInNAND, __u8 * data,
+-					 yaffs_ExtendedTags * tags);
++					 int chunkInNAND, __u8 *data,
++					 yaffs_ExtendedTags *tags);
+ int nandemul2k_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo);
+ int nandemul2k_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+-			      yaffs_BlockState * state, int *sequenceNumber);
++			      yaffs_BlockState *state, __u32 *sequenceNumber);
+ int nandemul2k_EraseBlockInNAND(struct yaffs_DeviceStruct *dev,
+ 				int blockInNAND);
+ int nandemul2k_InitialiseNAND(struct yaffs_DeviceStruct *dev);
+--- a/fs/yaffs2/yaffs_nand.h
++++ b/fs/yaffs2/yaffs_nand.h
+@@ -19,21 +19,21 @@
+ 
+ 
+ 
+-int yaffs_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+-					   __u8 * buffer,
+-					   yaffs_ExtendedTags * tags);
+-
+-int yaffs_WriteChunkWithTagsToNAND(yaffs_Device * dev,
+-						   int chunkInNAND,
+-						   const __u8 * buffer,
+-						   yaffs_ExtendedTags * tags);
+-
+-int yaffs_MarkBlockBad(yaffs_Device * dev, int blockNo);
+-
+-int yaffs_QueryInitialBlockState(yaffs_Device * dev,
+-						 int blockNo,
+-						 yaffs_BlockState * state,
+-						 unsigned *sequenceNumber);
++int yaffs_ReadChunkWithTagsFromNAND(yaffs_Device *dev, int chunkInNAND,
++					__u8 *buffer,
++					yaffs_ExtendedTags *tags);
++
++int yaffs_WriteChunkWithTagsToNAND(yaffs_Device *dev,
++						int chunkInNAND,
++						const __u8 *buffer,
++						yaffs_ExtendedTags *tags);
++
++int yaffs_MarkBlockBad(yaffs_Device *dev, int blockNo);
++
++int yaffs_QueryInitialBlockState(yaffs_Device *dev,
++						int blockNo,
++						yaffs_BlockState *state,
++						unsigned *sequenceNumber);
+ 
+ int yaffs_EraseBlockInNAND(struct yaffs_DeviceStruct *dev,
+ 				  int blockInNAND);
+--- a/fs/yaffs2/yaffs_packedtags1.c
++++ b/fs/yaffs2/yaffs_packedtags1.c
+@@ -14,7 +14,7 @@
+ #include "yaffs_packedtags1.h"
+ #include "yportenv.h"
+ 
+-void yaffs_PackTags1(yaffs_PackedTags1 * pt, const yaffs_ExtendedTags * t)
++void yaffs_PackTags1(yaffs_PackedTags1 *pt, const yaffs_ExtendedTags *t)
+ {
+ 	pt->chunkId = t->chunkId;
+ 	pt->serialNumber = t->serialNumber;
+@@ -27,7 +27,7 @@ void yaffs_PackTags1(yaffs_PackedTags1 *
+ 
+ }
+ 
+-void yaffs_UnpackTags1(yaffs_ExtendedTags * t, const yaffs_PackedTags1 * pt)
++void yaffs_UnpackTags1(yaffs_ExtendedTags *t, const yaffs_PackedTags1 *pt)
+ {
+ 	static const __u8 allFF[] =
+ 	    { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+@@ -35,9 +35,8 @@ void yaffs_UnpackTags1(yaffs_ExtendedTag
+ 
+ 	if (memcmp(allFF, pt, sizeof(yaffs_PackedTags1))) {
+ 		t->blockBad = 0;
+-		if (pt->shouldBeFF != 0xFFFFFFFF) {
++		if (pt->shouldBeFF != 0xFFFFFFFF)
+ 			t->blockBad = 1;
+-		}
+ 		t->chunkUsed = 1;
+ 		t->objectId = pt->objectId;
+ 		t->chunkId = pt->chunkId;
+@@ -47,6 +46,5 @@ void yaffs_UnpackTags1(yaffs_ExtendedTag
+ 		t->serialNumber = pt->serialNumber;
+ 	} else {
+ 		memset(t, 0, sizeof(yaffs_ExtendedTags));
+-
+ 	}
+ }
+--- a/fs/yaffs2/yaffs_packedtags1.h
++++ b/fs/yaffs2/yaffs_packedtags1.h
+@@ -32,6 +32,6 @@ typedef struct {
+ 
+ } yaffs_PackedTags1;
+ 
+-void yaffs_PackTags1(yaffs_PackedTags1 * pt, const yaffs_ExtendedTags * t);
+-void yaffs_UnpackTags1(yaffs_ExtendedTags * t, const yaffs_PackedTags1 * pt);
++void yaffs_PackTags1(yaffs_PackedTags1 *pt, const yaffs_ExtendedTags *t);
++void yaffs_UnpackTags1(yaffs_ExtendedTags *t, const yaffs_PackedTags1 *pt);
+ #endif
+--- a/fs/yaffs2/yaffs_packedtags2.c
++++ b/fs/yaffs2/yaffs_packedtags2.c
+@@ -37,60 +37,68 @@
+ #define EXTRA_OBJECT_TYPE_SHIFT (28)
+ #define EXTRA_OBJECT_TYPE_MASK  ((0x0F) << EXTRA_OBJECT_TYPE_SHIFT)
+ 
+-static void yaffs_DumpPackedTags2(const yaffs_PackedTags2 * pt)
++
++static void yaffs_DumpPackedTags2TagsPart(const yaffs_PackedTags2TagsPart *ptt)
+ {
+ 	T(YAFFS_TRACE_MTD,
+ 	  (TSTR("packed tags obj %d chunk %d byte %d seq %d" TENDSTR),
+-	   pt->t.objectId, pt->t.chunkId, pt->t.byteCount,
+-	   pt->t.sequenceNumber));
++	   ptt->objectId, ptt->chunkId, ptt->byteCount,
++	   ptt->sequenceNumber));
++}
++static void yaffs_DumpPackedTags2(const yaffs_PackedTags2 *pt)
++{
++	yaffs_DumpPackedTags2TagsPart(&pt->t);
+ }
+ 
+-static void yaffs_DumpTags2(const yaffs_ExtendedTags * t)
++static void yaffs_DumpTags2(const yaffs_ExtendedTags *t)
+ {
+ 	T(YAFFS_TRACE_MTD,
+ 	  (TSTR
+-	   ("ext.tags eccres %d blkbad %d chused %d obj %d chunk%d byte "
+-	    "%d del %d ser %d seq %d"
++	   ("ext.tags eccres %d blkbad %d chused %d obj %d chunk%d byte %d del %d ser %d seq %d"
+ 	    TENDSTR), t->eccResult, t->blockBad, t->chunkUsed, t->objectId,
+ 	   t->chunkId, t->byteCount, t->chunkDeleted, t->serialNumber,
+ 	   t->sequenceNumber));
+ 
+ }
+ 
+-void yaffs_PackTags2(yaffs_PackedTags2 * pt, const yaffs_ExtendedTags * t)
++void yaffs_PackTags2TagsPart(yaffs_PackedTags2TagsPart *ptt,
++		const yaffs_ExtendedTags *t)
+ {
+-	pt->t.chunkId = t->chunkId;
+-	pt->t.sequenceNumber = t->sequenceNumber;
+-	pt->t.byteCount = t->byteCount;
+-	pt->t.objectId = t->objectId;
++	ptt->chunkId = t->chunkId;
++	ptt->sequenceNumber = t->sequenceNumber;
++	ptt->byteCount = t->byteCount;
++	ptt->objectId = t->objectId;
+ 
+ 	if (t->chunkId == 0 && t->extraHeaderInfoAvailable) {
+ 		/* Store the extra header info instead */
+ 		/* We save the parent object in the chunkId */
+-		pt->t.chunkId = EXTRA_HEADER_INFO_FLAG
++		ptt->chunkId = EXTRA_HEADER_INFO_FLAG
+ 			| t->extraParentObjectId;
+-		if (t->extraIsShrinkHeader) {
+-			pt->t.chunkId |= EXTRA_SHRINK_FLAG;
+-		}
+-		if (t->extraShadows) {
+-			pt->t.chunkId |= EXTRA_SHADOWS_FLAG;
+-		}
++		if (t->extraIsShrinkHeader)
++			ptt->chunkId |= EXTRA_SHRINK_FLAG;
++		if (t->extraShadows)
++			ptt->chunkId |= EXTRA_SHADOWS_FLAG;
+ 
+-		pt->t.objectId &= ~EXTRA_OBJECT_TYPE_MASK;
+-		pt->t.objectId |=
++		ptt->objectId &= ~EXTRA_OBJECT_TYPE_MASK;
++		ptt->objectId |=
+ 		    (t->extraObjectType << EXTRA_OBJECT_TYPE_SHIFT);
+ 
+-		if (t->extraObjectType == YAFFS_OBJECT_TYPE_HARDLINK) {
+-			pt->t.byteCount = t->extraEquivalentObjectId;
+-		} else if (t->extraObjectType == YAFFS_OBJECT_TYPE_FILE) {
+-			pt->t.byteCount = t->extraFileLength;
+-		} else {
+-			pt->t.byteCount = 0;
+-		}
++		if (t->extraObjectType == YAFFS_OBJECT_TYPE_HARDLINK)
++			ptt->byteCount = t->extraEquivalentObjectId;
++		else if (t->extraObjectType == YAFFS_OBJECT_TYPE_FILE)
++			ptt->byteCount = t->extraFileLength;
++		else
++			ptt->byteCount = 0;
+ 	}
+ 
+-	yaffs_DumpPackedTags2(pt);
++	yaffs_DumpPackedTags2TagsPart(ptt);
+ 	yaffs_DumpTags2(t);
++}
++
++
++void yaffs_PackTags2(yaffs_PackedTags2 *pt, const yaffs_ExtendedTags *t)
++{
++	yaffs_PackTags2TagsPart(&pt->t, t);
+ 
+ #ifndef YAFFS_IGNORE_TAGS_ECC
+ 	{
+@@ -101,82 +109,98 @@ void yaffs_PackTags2(yaffs_PackedTags2 *
+ #endif
+ }
+ 
+-void yaffs_UnpackTags2(yaffs_ExtendedTags * t, yaffs_PackedTags2 * pt)
++
++void yaffs_UnpackTags2TagsPart(yaffs_ExtendedTags *t,
++		yaffs_PackedTags2TagsPart *ptt)
+ {
+ 
+ 	memset(t, 0, sizeof(yaffs_ExtendedTags));
+ 
+ 	yaffs_InitialiseTags(t);
+ 
+-	if (pt->t.sequenceNumber != 0xFFFFFFFF) {
+-		/* Page is in use */
+-#ifdef YAFFS_IGNORE_TAGS_ECC
+-		{
+-			t->eccResult = YAFFS_ECC_RESULT_NO_ERROR;
+-		}
+-#else
+-		{
+-			yaffs_ECCOther ecc;
+-			int result;
+-			yaffs_ECCCalculateOther((unsigned char *)&pt->t,
+-						sizeof
+-						(yaffs_PackedTags2TagsPart),
+-						&ecc);
+-			result =
+-			    yaffs_ECCCorrectOther((unsigned char *)&pt->t,
+-						  sizeof
+-						  (yaffs_PackedTags2TagsPart),
+-						  &pt->ecc, &ecc);
+-			switch(result){
+-				case 0:
+-					t->eccResult = YAFFS_ECC_RESULT_NO_ERROR;
+-					break;
+-				case 1:
+-					t->eccResult = YAFFS_ECC_RESULT_FIXED;
+-					break;
+-				case -1:
+-					t->eccResult = YAFFS_ECC_RESULT_UNFIXED;
+-					break;
+-				default:
+-					t->eccResult = YAFFS_ECC_RESULT_UNKNOWN;
+-			}
+-		}
+-#endif
++	if (ptt->sequenceNumber != 0xFFFFFFFF) {
+ 		t->blockBad = 0;
+ 		t->chunkUsed = 1;
+-		t->objectId = pt->t.objectId;
+-		t->chunkId = pt->t.chunkId;
+-		t->byteCount = pt->t.byteCount;
++		t->objectId = ptt->objectId;
++		t->chunkId = ptt->chunkId;
++		t->byteCount = ptt->byteCount;
+ 		t->chunkDeleted = 0;
+ 		t->serialNumber = 0;
+-		t->sequenceNumber = pt->t.sequenceNumber;
++		t->sequenceNumber = ptt->sequenceNumber;
+ 
+ 		/* Do extra header info stuff */
+ 
+-		if (pt->t.chunkId & EXTRA_HEADER_INFO_FLAG) {
++		if (ptt->chunkId & EXTRA_HEADER_INFO_FLAG) {
+ 			t->chunkId = 0;
+ 			t->byteCount = 0;
+ 
+ 			t->extraHeaderInfoAvailable = 1;
+ 			t->extraParentObjectId =
+-			    pt->t.chunkId & (~(ALL_EXTRA_FLAGS));
++			    ptt->chunkId & (~(ALL_EXTRA_FLAGS));
+ 			t->extraIsShrinkHeader =
+-			    (pt->t.chunkId & EXTRA_SHRINK_FLAG) ? 1 : 0;
++			    (ptt->chunkId & EXTRA_SHRINK_FLAG) ? 1 : 0;
+ 			t->extraShadows =
+-			    (pt->t.chunkId & EXTRA_SHADOWS_FLAG) ? 1 : 0;
++			    (ptt->chunkId & EXTRA_SHADOWS_FLAG) ? 1 : 0;
+ 			t->extraObjectType =
+-			    pt->t.objectId >> EXTRA_OBJECT_TYPE_SHIFT;
++			    ptt->objectId >> EXTRA_OBJECT_TYPE_SHIFT;
+ 			t->objectId &= ~EXTRA_OBJECT_TYPE_MASK;
+ 
+-			if (t->extraObjectType == YAFFS_OBJECT_TYPE_HARDLINK) {
+-				t->extraEquivalentObjectId = pt->t.byteCount;
+-			} else {
+-				t->extraFileLength = pt->t.byteCount;
++			if (t->extraObjectType == YAFFS_OBJECT_TYPE_HARDLINK)
++				t->extraEquivalentObjectId = ptt->byteCount;
++			else
++				t->extraFileLength = ptt->byteCount;
++		}
++	}
++
++	yaffs_DumpPackedTags2TagsPart(ptt);
++	yaffs_DumpTags2(t);
++
++}
++
++
++void yaffs_UnpackTags2(yaffs_ExtendedTags *t, yaffs_PackedTags2 *pt)
++{
++
++	yaffs_ECCResult eccResult = YAFFS_ECC_RESULT_NO_ERROR;
++
++	if (pt->t.sequenceNumber != 0xFFFFFFFF) {
++		/* Page is in use */
++#ifndef YAFFS_IGNORE_TAGS_ECC
++		{
++			yaffs_ECCOther ecc;
++			int result;
++			yaffs_ECCCalculateOther((unsigned char *)&pt->t,
++						sizeof
++						(yaffs_PackedTags2TagsPart),
++						&ecc);
++			result =
++			    yaffs_ECCCorrectOther((unsigned char *)&pt->t,
++						  sizeof
++						  (yaffs_PackedTags2TagsPart),
++						  &pt->ecc, &ecc);
++			switch (result) {
++			case 0:
++				eccResult = YAFFS_ECC_RESULT_NO_ERROR;
++				break;
++			case 1:
++				eccResult = YAFFS_ECC_RESULT_FIXED;
++				break;
++			case -1:
++				eccResult = YAFFS_ECC_RESULT_UNFIXED;
++				break;
++			default:
++				eccResult = YAFFS_ECC_RESULT_UNKNOWN;
+ 			}
+ 		}
++#endif
+ 	}
+ 
++	yaffs_UnpackTags2TagsPart(t, &pt->t);
++
++	t->eccResult = eccResult;
++
+ 	yaffs_DumpPackedTags2(pt);
+ 	yaffs_DumpTags2(t);
+ 
+ }
++
+--- a/fs/yaffs2/yaffs_packedtags2.h
++++ b/fs/yaffs2/yaffs_packedtags2.h
+@@ -33,6 +33,11 @@ typedef struct {
+ 	yaffs_ECCOther ecc;
+ } yaffs_PackedTags2;
+ 
+-void yaffs_PackTags2(yaffs_PackedTags2 * pt, const yaffs_ExtendedTags * t);
+-void yaffs_UnpackTags2(yaffs_ExtendedTags * t, yaffs_PackedTags2 * pt);
++/* Full packed tags with ECC, used for oob tags */
++void yaffs_PackTags2(yaffs_PackedTags2 *pt, const yaffs_ExtendedTags *t);
++void yaffs_UnpackTags2(yaffs_ExtendedTags *t, yaffs_PackedTags2 *pt);
++
++/* Only the tags part (no ECC for use with inband tags */
++void yaffs_PackTags2TagsPart(yaffs_PackedTags2TagsPart *pt, const yaffs_ExtendedTags *t);
++void yaffs_UnpackTags2TagsPart(yaffs_ExtendedTags *t, yaffs_PackedTags2TagsPart *pt);
+ #endif
+--- a/fs/yaffs2/yaffs_qsort.c
++++ b/fs/yaffs2/yaffs_qsort.c
+@@ -28,12 +28,12 @@
+  */
+ 
+ #include "yportenv.h"
+-//#include <linux/string.h>
++/* #include <linux/string.h> */
+ 
+ /*
+  * Qsort routine from Bentley & McIlroy's "Engineering a Sort Function".
+  */
+-#define swapcode(TYPE, parmi, parmj, n) { 		\
++#define swapcode(TYPE, parmi, parmj, n) do { 		\
+ 	long i = (n) / sizeof (TYPE); 			\
+ 	register TYPE *pi = (TYPE *) (parmi); 		\
+ 	register TYPE *pj = (TYPE *) (parmj); 		\
+@@ -41,28 +41,29 @@
+ 		register TYPE	t = *pi;		\
+ 		*pi++ = *pj;				\
+ 		*pj++ = t;				\
+-        } while (--i > 0);				\
+-}
++	} while (--i > 0);				\
++} while (0)
+ 
+ #define SWAPINIT(a, es) swaptype = ((char *)a - (char *)0) % sizeof(long) || \
+-	es % sizeof(long) ? 2 : es == sizeof(long)? 0 : 1;
++	es % sizeof(long) ? 2 : es == sizeof(long) ? 0 : 1;
+ 
+ static __inline void
+ swapfunc(char *a, char *b, int n, int swaptype)
+ {
+ 	if (swaptype <= 1)
+-		swapcode(long, a, b, n)
++		swapcode(long, a, b, n);
+ 	else
+-		swapcode(char, a, b, n)
++		swapcode(char, a, b, n);
+ }
+ 
+-#define swap(a, b)					\
++#define yswap(a, b) do {					\
+ 	if (swaptype == 0) {				\
+ 		long t = *(long *)(a);			\
+ 		*(long *)(a) = *(long *)(b);		\
+ 		*(long *)(b) = t;			\
+ 	} else						\
+-		swapfunc(a, b, es, swaptype)
++		swapfunc(a, b, es, swaptype);		\
++} while (0)
+ 
+ #define vecswap(a, b, n) 	if ((n) > 0) swapfunc(a, b, n, swaptype)
+ 
+@@ -70,12 +71,12 @@ static __inline char *
+ med3(char *a, char *b, char *c, int (*cmp)(const void *, const void *))
+ {
+ 	return cmp(a, b) < 0 ?
+-	       (cmp(b, c) < 0 ? b : (cmp(a, c) < 0 ? c : a ))
+-              :(cmp(b, c) > 0 ? b : (cmp(a, c) < 0 ? a : c ));
++		(cmp(b, c) < 0 ? b : (cmp(a, c) < 0 ? c : a))
++		: (cmp(b, c) > 0 ? b : (cmp(a, c) < 0 ? a : c));
+ }
+ 
+ #ifndef min
+-#define min(a,b) (((a) < (b)) ? (a) : (b))
++#define min(a, b) (((a) < (b)) ? (a) : (b))
+ #endif
+ 
+ void
+@@ -92,7 +93,7 @@ loop:	SWAPINIT(a, es);
+ 		for (pm = (char *)a + es; pm < (char *) a + n * es; pm += es)
+ 			for (pl = pm; pl > (char *) a && cmp(pl - es, pl) > 0;
+ 			     pl -= es)
+-				swap(pl, pl - es);
++				yswap(pl, pl - es);
+ 		return;
+ 	}
+ 	pm = (char *)a + (n / 2) * es;
+@@ -107,7 +108,7 @@ loop:	SWAPINIT(a, es);
+ 		}
+ 		pm = med3(pl, pm, pn, cmp);
+ 	}
+-	swap(a, pm);
++	yswap(a, pm);
+ 	pa = pb = (char *)a + es;
+ 
+ 	pc = pd = (char *)a + (n - 1) * es;
+@@ -115,7 +116,7 @@ loop:	SWAPINIT(a, es);
+ 		while (pb <= pc && (r = cmp(pb, a)) <= 0) {
+ 			if (r == 0) {
+ 				swap_cnt = 1;
+-				swap(pa, pb);
++				yswap(pa, pb);
+ 				pa += es;
+ 			}
+ 			pb += es;
+@@ -123,14 +124,14 @@ loop:	SWAPINIT(a, es);
+ 		while (pb <= pc && (r = cmp(pc, a)) >= 0) {
+ 			if (r == 0) {
+ 				swap_cnt = 1;
+-				swap(pc, pd);
++				yswap(pc, pd);
+ 				pd -= es;
+ 			}
+ 			pc -= es;
+ 		}
+ 		if (pb > pc)
+ 			break;
+-		swap(pb, pc);
++		yswap(pb, pc);
+ 		swap_cnt = 1;
+ 		pb += es;
+ 		pc -= es;
+@@ -139,7 +140,7 @@ loop:	SWAPINIT(a, es);
+ 		for (pm = (char *) a + es; pm < (char *) a + n * es; pm += es)
+ 			for (pl = pm; pl > (char *) a && cmp(pl - es, pl) > 0;
+ 			     pl -= es)
+-				swap(pl, pl - es);
++				yswap(pl, pl - es);
+ 		return;
+ 	}
+ 
+@@ -148,9 +149,11 @@ loop:	SWAPINIT(a, es);
+ 	vecswap(a, pb - r, r);
+ 	r = min((long)(pd - pc), (long)(pn - pd - es));
+ 	vecswap(pb, pn - r, r);
+-	if ((r = pb - pa) > es)
++	r = pb - pa;
++	if (r > es)
+ 		yaffs_qsort(a, r / es, es, cmp);
+-	if ((r = pd - pc) > es) {
++	r = pd - pc;
++	if (r > es) {
+ 		/* Iterate rather than recurse to save stack space */
+ 		a = pn - r;
+ 		n = r / es;
+--- a/fs/yaffs2/yaffs_qsort.h
++++ b/fs/yaffs2/yaffs_qsort.h
+@@ -17,7 +17,7 @@
+ #ifndef __YAFFS_QSORT_H__
+ #define __YAFFS_QSORT_H__
+ 
+-extern void yaffs_qsort (void *const base, size_t total_elems, size_t size,
+-                   int (*cmp)(const void *, const void *));
++extern void yaffs_qsort(void *const base, size_t total_elems, size_t size,
++			int (*cmp)(const void *, const void *));
+ 
+ #endif
+--- a/fs/yaffs2/yaffs_tagscompat.c
++++ b/fs/yaffs2/yaffs_tagscompat.c
+@@ -14,16 +14,17 @@
+ #include "yaffs_guts.h"
+ #include "yaffs_tagscompat.h"
+ #include "yaffs_ecc.h"
++#include "yaffs_getblockinfo.h"
+ 
+-static void yaffs_HandleReadDataError(yaffs_Device * dev, int chunkInNAND);
++static void yaffs_HandleReadDataError(yaffs_Device *dev, int chunkInNAND);
+ #ifdef NOTYET
+-static void yaffs_CheckWrittenBlock(yaffs_Device * dev, int chunkInNAND);
+-static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+-				     const __u8 * data,
+-				     const yaffs_Spare * spare);
+-static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+-				    const yaffs_Spare * spare);
+-static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND);
++static void yaffs_CheckWrittenBlock(yaffs_Device *dev, int chunkInNAND);
++static void yaffs_HandleWriteChunkOk(yaffs_Device *dev, int chunkInNAND,
++				     const __u8 *data,
++				     const yaffs_Spare *spare);
++static void yaffs_HandleUpdateChunk(yaffs_Device *dev, int chunkInNAND,
++				    const yaffs_Spare *spare);
++static void yaffs_HandleWriteChunkError(yaffs_Device *dev, int chunkInNAND);
+ #endif
+ 
+ static const char yaffs_countBitsTable[256] = {
+@@ -54,13 +55,13 @@ int yaffs_CountBits(__u8 x)
+ 
+ /********** Tags ECC calculations  *********/
+ 
+-void yaffs_CalcECC(const __u8 * data, yaffs_Spare * spare)
++void yaffs_CalcECC(const __u8 *data, yaffs_Spare *spare)
+ {
+ 	yaffs_ECCCalculate(data, spare->ecc1);
+ 	yaffs_ECCCalculate(&data[256], spare->ecc2);
+ }
+ 
+-void yaffs_CalcTagsECC(yaffs_Tags * tags)
++void yaffs_CalcTagsECC(yaffs_Tags *tags)
+ {
+ 	/* Calculate an ecc */
+ 
+@@ -74,9 +75,8 @@ void yaffs_CalcTagsECC(yaffs_Tags * tags
+ 	for (i = 0; i < 8; i++) {
+ 		for (j = 1; j & 0xff; j <<= 1) {
+ 			bit++;
+-			if (b[i] & j) {
++			if (b[i] & j)
+ 				ecc ^= bit;
+-			}
+ 		}
+ 	}
+ 
+@@ -84,7 +84,7 @@ void yaffs_CalcTagsECC(yaffs_Tags * tags
+ 
+ }
+ 
+-int yaffs_CheckECCOnTags(yaffs_Tags * tags)
++int yaffs_CheckECCOnTags(yaffs_Tags *tags)
+ {
+ 	unsigned ecc = tags->ecc;
+ 
+@@ -115,8 +115,8 @@ int yaffs_CheckECCOnTags(yaffs_Tags * ta
+ 
+ /********** Tags **********/
+ 
+-static void yaffs_LoadTagsIntoSpare(yaffs_Spare * sparePtr,
+-				    yaffs_Tags * tagsPtr)
++static void yaffs_LoadTagsIntoSpare(yaffs_Spare *sparePtr,
++				yaffs_Tags *tagsPtr)
+ {
+ 	yaffs_TagsUnion *tu = (yaffs_TagsUnion *) tagsPtr;
+ 
+@@ -132,8 +132,8 @@ static void yaffs_LoadTagsIntoSpare(yaff
+ 	sparePtr->tagByte7 = tu->asBytes[7];
+ }
+ 
+-static void yaffs_GetTagsFromSpare(yaffs_Device * dev, yaffs_Spare * sparePtr,
+-				   yaffs_Tags * tagsPtr)
++static void yaffs_GetTagsFromSpare(yaffs_Device *dev, yaffs_Spare *sparePtr,
++				yaffs_Tags *tagsPtr)
+ {
+ 	yaffs_TagsUnion *tu = (yaffs_TagsUnion *) tagsPtr;
+ 	int result;
+@@ -148,21 +148,20 @@ static void yaffs_GetTagsFromSpare(yaffs
+ 	tu->asBytes[7] = sparePtr->tagByte7;
+ 
+ 	result = yaffs_CheckECCOnTags(tagsPtr);
+-	if (result > 0) {
++	if (result > 0)
+ 		dev->tagsEccFixed++;
+-	} else if (result < 0) {
++	else if (result < 0)
+ 		dev->tagsEccUnfixed++;
+-	}
+ }
+ 
+-static void yaffs_SpareInitialise(yaffs_Spare * spare)
++static void yaffs_SpareInitialise(yaffs_Spare *spare)
+ {
+ 	memset(spare, 0xFF, sizeof(yaffs_Spare));
+ }
+ 
+ static int yaffs_WriteChunkToNAND(struct yaffs_DeviceStruct *dev,
+-				  int chunkInNAND, const __u8 * data,
+-				  yaffs_Spare * spare)
++				int chunkInNAND, const __u8 *data,
++				yaffs_Spare *spare)
+ {
+ 	if (chunkInNAND < dev->startBlock * dev->nChunksPerBlock) {
+ 		T(YAFFS_TRACE_ERROR,
+@@ -177,9 +176,9 @@ static int yaffs_WriteChunkToNAND(struct
+ 
+ static int yaffs_ReadChunkFromNAND(struct yaffs_DeviceStruct *dev,
+ 				   int chunkInNAND,
+-				   __u8 * data,
+-				   yaffs_Spare * spare,
+-				   yaffs_ECCResult * eccResult,
++				   __u8 *data,
++				   yaffs_Spare *spare,
++				   yaffs_ECCResult *eccResult,
+ 				   int doErrorCorrection)
+ {
+ 	int retVal;
+@@ -252,9 +251,11 @@ static int yaffs_ReadChunkFromNAND(struc
+ 		/* Must allocate enough memory for spare+2*sizeof(int) */
+ 		/* for ecc results from device. */
+ 		struct yaffs_NANDSpare nspare;
+-		retVal =
+-		    dev->readChunkFromNAND(dev, chunkInNAND, data,
+-					   (yaffs_Spare *) & nspare);
++
++		memset(&nspare, 0, sizeof(nspare));
++
++		retVal = dev->readChunkFromNAND(dev, chunkInNAND, data,
++					(yaffs_Spare *) &nspare);
+ 		memcpy(spare, &nspare, sizeof(yaffs_Spare));
+ 		if (data && doErrorCorrection) {
+ 			if (nspare.eccres1 > 0) {
+@@ -302,8 +303,7 @@ static int yaffs_ReadChunkFromNAND(struc
+ static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev,
+ 				  int chunkInNAND)
+ {
+-
+-	static int init = 0;
++	static int init;
+ 	static __u8 cmpbuf[YAFFS_BYTES_PER_CHUNK];
+ 	static __u8 data[YAFFS_BYTES_PER_CHUNK];
+ 	/* Might as well always allocate the larger size for */
+@@ -331,12 +331,12 @@ static int yaffs_CheckChunkErased(struct
+  * Functions for robustisizing
+  */
+ 
+-static void yaffs_HandleReadDataError(yaffs_Device * dev, int chunkInNAND)
++static void yaffs_HandleReadDataError(yaffs_Device *dev, int chunkInNAND)
+ {
+ 	int blockInNAND = chunkInNAND / dev->nChunksPerBlock;
+ 
+ 	/* Mark the block for retirement */
+-	yaffs_GetBlockInfo(dev, blockInNAND)->needsRetiring = 1;
++	yaffs_GetBlockInfo(dev, blockInNAND + dev->blockOffset)->needsRetiring = 1;
+ 	T(YAFFS_TRACE_ERROR | YAFFS_TRACE_BAD_BLOCKS,
+ 	  (TSTR("**>>Block %d marked for retirement" TENDSTR), blockInNAND));
+ 
+@@ -348,22 +348,22 @@ static void yaffs_HandleReadDataError(ya
+ }
+ 
+ #ifdef NOTYET
+-static void yaffs_CheckWrittenBlock(yaffs_Device * dev, int chunkInNAND)
++static void yaffs_CheckWrittenBlock(yaffs_Device *dev, int chunkInNAND)
+ {
+ }
+ 
+-static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+-				     const __u8 * data,
+-				     const yaffs_Spare * spare)
++static void yaffs_HandleWriteChunkOk(yaffs_Device *dev, int chunkInNAND,
++				     const __u8 *data,
++				     const yaffs_Spare *spare)
+ {
+ }
+ 
+-static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+-				    const yaffs_Spare * spare)
++static void yaffs_HandleUpdateChunk(yaffs_Device *dev, int chunkInNAND,
++				    const yaffs_Spare *spare)
+ {
+ }
+ 
+-static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND)
++static void yaffs_HandleWriteChunkError(yaffs_Device *dev, int chunkInNAND)
+ {
+ 	int blockInNAND = chunkInNAND / dev->nChunksPerBlock;
+ 
+@@ -373,8 +373,8 @@ static void yaffs_HandleWriteChunkError(
+ 	yaffs_DeleteChunk(dev, chunkInNAND, 1, __LINE__);
+ }
+ 
+-static int yaffs_VerifyCompare(const __u8 * d0, const __u8 * d1,
+-			       const yaffs_Spare * s0, const yaffs_Spare * s1)
++static int yaffs_VerifyCompare(const __u8 *d0, const __u8 *d1,
++			       const yaffs_Spare *s0, const yaffs_Spare *s1)
+ {
+ 
+ 	if (memcmp(d0, d1, YAFFS_BYTES_PER_CHUNK) != 0 ||
+@@ -398,28 +398,35 @@ static int yaffs_VerifyCompare(const __u
+ }
+ #endif				/* NOTYET */
+ 
+-int yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(yaffs_Device * dev,
+-						    int chunkInNAND,
+-						    const __u8 * data,
+-						    const yaffs_ExtendedTags *
+-						    eTags)
++int yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(yaffs_Device *dev,
++						int chunkInNAND,
++						const __u8 *data,
++						const yaffs_ExtendedTags *eTags)
+ {
+ 	yaffs_Spare spare;
+ 	yaffs_Tags tags;
+ 
+ 	yaffs_SpareInitialise(&spare);
+ 
+-	if (eTags->chunkDeleted) {
++	if (eTags->chunkDeleted)
+ 		spare.pageStatus = 0;
+-	} else {
++	else {
+ 		tags.objectId = eTags->objectId;
+ 		tags.chunkId = eTags->chunkId;
+-		tags.byteCount = eTags->byteCount;
++
++		tags.byteCountLSB = eTags->byteCount & 0x3ff;
++
++		if (dev->nDataBytesPerChunk >= 1024)
++			tags.byteCountMSB = (eTags->byteCount >> 10) & 3;
++		else
++			tags.byteCountMSB = 3;
++
++
+ 		tags.serialNumber = eTags->serialNumber;
+ 
+-		if (!dev->useNANDECC && data) {
++		if (!dev->useNANDECC && data)
+ 			yaffs_CalcECC(data, &spare);
+-		}
++
+ 		yaffs_LoadTagsIntoSpare(&spare, &tags);
+ 
+ 	}
+@@ -427,15 +434,15 @@ int yaffs_TagsCompatabilityWriteChunkWit
+ 	return yaffs_WriteChunkToNAND(dev, chunkInNAND, data, &spare);
+ }
+ 
+-int yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(yaffs_Device * dev,
++int yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(yaffs_Device *dev,
+ 						     int chunkInNAND,
+-						     __u8 * data,
+-						     yaffs_ExtendedTags * eTags)
++						     __u8 *data,
++						     yaffs_ExtendedTags *eTags)
+ {
+ 
+ 	yaffs_Spare spare;
+ 	yaffs_Tags tags;
+-	yaffs_ECCResult eccResult;
++	yaffs_ECCResult eccResult = YAFFS_ECC_RESULT_UNKNOWN;
+ 
+ 	static yaffs_Spare spareFF;
+ 	static int init;
+@@ -466,7 +473,11 @@ int yaffs_TagsCompatabilityReadChunkWith
+ 
+ 				eTags->objectId = tags.objectId;
+ 				eTags->chunkId = tags.chunkId;
+-				eTags->byteCount = tags.byteCount;
++				eTags->byteCount = tags.byteCountLSB;
++
++				if (dev->nDataBytesPerChunk >= 1024)
++					eTags->byteCount |= (((unsigned) tags.byteCountMSB) << 10);
++
+ 				eTags->serialNumber = tags.serialNumber;
+ 			}
+ 		}
+@@ -497,9 +508,9 @@ int yaffs_TagsCompatabilityMarkNANDBlock
+ }
+ 
+ int yaffs_TagsCompatabilityQueryNANDBlock(struct yaffs_DeviceStruct *dev,
+-					  int blockNo, yaffs_BlockState *
+-					  state,
+-					  int *sequenceNumber)
++					  int blockNo,
++					  yaffs_BlockState *state,
++					  __u32 *sequenceNumber)
+ {
+ 
+ 	yaffs_Spare spare0, spare1;
+--- a/fs/yaffs2/yaffs_tagscompat.h
++++ b/fs/yaffs2/yaffs_tagscompat.h
+@@ -17,24 +17,23 @@
+ #define __YAFFS_TAGSCOMPAT_H__
+ 
+ #include "yaffs_guts.h"
+-int yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(yaffs_Device * dev,
+-						    int chunkInNAND,
+-						    const __u8 * data,
+-						    const yaffs_ExtendedTags *
+-						    tags);
+-int yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(yaffs_Device * dev,
+-						     int chunkInNAND,
+-						     __u8 * data,
+-						     yaffs_ExtendedTags *
+-						     tags);
++int yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(yaffs_Device *dev,
++						int chunkInNAND,
++						const __u8 *data,
++						const yaffs_ExtendedTags *tags);
++int yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(yaffs_Device *dev,
++						int chunkInNAND,
++						__u8 *data,
++						yaffs_ExtendedTags *tags);
+ int yaffs_TagsCompatabilityMarkNANDBlockBad(struct yaffs_DeviceStruct *dev,
+ 					    int blockNo);
+ int yaffs_TagsCompatabilityQueryNANDBlock(struct yaffs_DeviceStruct *dev,
+-					  int blockNo, yaffs_BlockState *
+-					  state, int *sequenceNumber);
++					  int blockNo,
++					  yaffs_BlockState *state,
++					  __u32 *sequenceNumber);
+ 
+-void yaffs_CalcTagsECC(yaffs_Tags * tags);
+-int yaffs_CheckECCOnTags(yaffs_Tags * tags);
++void yaffs_CalcTagsECC(yaffs_Tags *tags);
++int yaffs_CheckECCOnTags(yaffs_Tags *tags);
+ int yaffs_CountBits(__u8 byte);
+ 
+ #endif
+--- a/fs/yaffs2/yaffs_tagsvalidity.c
++++ b/fs/yaffs2/yaffs_tagsvalidity.c
+@@ -13,14 +13,14 @@
+ 
+ #include "yaffs_tagsvalidity.h"
+ 
+-void yaffs_InitialiseTags(yaffs_ExtendedTags * tags)
++void yaffs_InitialiseTags(yaffs_ExtendedTags *tags)
+ {
+ 	memset(tags, 0, sizeof(yaffs_ExtendedTags));
+ 	tags->validMarker0 = 0xAAAAAAAA;
+ 	tags->validMarker1 = 0x55555555;
+ }
+ 
+-int yaffs_ValidateTags(yaffs_ExtendedTags * tags)
++int yaffs_ValidateTags(yaffs_ExtendedTags *tags)
+ {
+ 	return (tags->validMarker0 == 0xAAAAAAAA &&
+ 		tags->validMarker1 == 0x55555555);
+--- a/fs/yaffs2/yaffs_tagsvalidity.h
++++ b/fs/yaffs2/yaffs_tagsvalidity.h
+@@ -19,6 +19,6 @@
+ 
+ #include "yaffs_guts.h"
+ 
+-void yaffs_InitialiseTags(yaffs_ExtendedTags * tags);
+-int yaffs_ValidateTags(yaffs_ExtendedTags * tags);
++void yaffs_InitialiseTags(yaffs_ExtendedTags *tags);
++int yaffs_ValidateTags(yaffs_ExtendedTags *tags);
+ #endif
+--- a/fs/yaffs2/yportenv.h
++++ b/fs/yaffs2/yportenv.h
+@@ -17,17 +17,28 @@
+ #ifndef __YPORTENV_H__
+ #define __YPORTENV_H__
+ 
++/*
++ * Define the MTD version in terms of Linux Kernel versions
++ * This allows yaffs to be used independantly of the kernel
++ * as well as with it.
++ */
++
++#define MTD_VERSION(a, b, c) (((a) << 16) + ((b) << 8) + (c))
++
+ #if defined CONFIG_YAFFS_WINCE
+ 
+ #include "ywinceenv.h"
+ 
+-#elif  defined __KERNEL__
++#elif defined __KERNEL__
+ 
+ #include "moduleconfig.h"
+ 
+ /* Linux kernel */
++
+ #include <linux/version.h>
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19))
++#define MTD_VERSION_CODE LINUX_VERSION_CODE
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 19))
+ #include <linux/config.h>
+ #endif
+ #include <linux/kernel.h>
+@@ -40,12 +51,13 @@
+ #define YCHAR char
+ #define YUCHAR unsigned char
+ #define _Y(x)     x
+-#define yaffs_strcpy(a,b)    strcpy(a,b)
+-#define yaffs_strncpy(a,b,c) strncpy(a,b,c)
+-#define yaffs_strncmp(a,b,c) strncmp(a,b,c)
+-#define yaffs_strlen(s)	     strlen(s)
+-#define yaffs_sprintf	     sprintf
+-#define yaffs_toupper(a)     toupper(a)
++#define yaffs_strcat(a, b)     strcat(a, b)
++#define yaffs_strcpy(a, b)     strcpy(a, b)
++#define yaffs_strncpy(a, b, c) strncpy(a, b, c)
++#define yaffs_strncmp(a, b, c) strncmp(a, b, c)
++#define yaffs_strlen(s)	       strlen(s)
++#define yaffs_sprintf	       sprintf
++#define yaffs_toupper(a)       toupper(a)
+ 
+ #define Y_INLINE inline
+ 
+@@ -53,19 +65,19 @@
+ #define YAFFS_LOSTNFOUND_PREFIX		"obj"
+ 
+ /* #define YPRINTF(x) printk x */
+-#define YMALLOC(x) kmalloc(x,GFP_KERNEL)
++#define YMALLOC(x) kmalloc(x, GFP_NOFS)
+ #define YFREE(x)   kfree(x)
+ #define YMALLOC_ALT(x) vmalloc(x)
+ #define YFREE_ALT(x)   vfree(x)
+ #define YMALLOC_DMA(x) YMALLOC(x)
+ 
+-// KR - added for use in scan so processes aren't blocked indefinitely.
++/* KR - added for use in scan so processes aren't blocked indefinitely. */
+ #define YYIELD() schedule()
+ 
+ #define YAFFS_ROOT_MODE			0666
+ #define YAFFS_LOSTNFOUND_MODE		0666
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ #define Y_CURRENT_TIME CURRENT_TIME.tv_sec
+ #define Y_TIME_CONVERT(x) (x).tv_sec
+ #else
+@@ -73,11 +85,12 @@
+ #define Y_TIME_CONVERT(x) (x)
+ #endif
+ 
+-#define yaffs_SumCompare(x,y) ((x) == (y))
+-#define yaffs_strcmp(a,b) strcmp(a,b)
++#define yaffs_SumCompare(x, y) ((x) == (y))
++#define yaffs_strcmp(a, b) strcmp(a, b)
+ 
+ #define TENDSTR "\n"
+ #define TSTR(x) KERN_WARNING x
++#define TCONT(x) x
+ #define TOUT(p) printk p
+ 
+ #define yaffs_trace(mask, fmt, args...) \
+@@ -90,6 +103,8 @@
+ 
+ #elif defined CONFIG_YAFFS_DIRECT
+ 
++#define MTD_VERSION_CODE MTD_VERSION(2, 6, 22)
++
+ /* Direct interface */
+ #include "ydirectenv.h"
+ 
+@@ -111,11 +126,12 @@
+ #define YCHAR char
+ #define YUCHAR unsigned char
+ #define _Y(x)     x
+-#define yaffs_strcpy(a,b)    strcpy(a,b)
+-#define yaffs_strncpy(a,b,c) strncpy(a,b,c)
+-#define yaffs_strlen(s)	     strlen(s)
+-#define yaffs_sprintf	     sprintf
+-#define yaffs_toupper(a)     toupper(a)
++#define yaffs_strcat(a, b)     strcat(a, b)
++#define yaffs_strcpy(a, b)     strcpy(a, b)
++#define yaffs_strncpy(a, b, c) strncpy(a, b, c)
++#define yaffs_strlen(s)	       strlen(s)
++#define yaffs_sprintf	       sprintf
++#define yaffs_toupper(a)       toupper(a)
+ 
+ #define Y_INLINE inline
+ 
+@@ -133,8 +149,8 @@
+ #define YAFFS_ROOT_MODE				0666
+ #define YAFFS_LOSTNFOUND_MODE		0666
+ 
+-#define yaffs_SumCompare(x,y) ((x) == (y))
+-#define yaffs_strcmp(a,b) strcmp(a,b)
++#define yaffs_SumCompare(x, y) ((x) == (y))
++#define yaffs_strcmp(a, b) strcmp(a, b)
+ 
+ #else
+ /* Should have specified a configuration type */
+@@ -178,10 +194,10 @@ extern unsigned int yaffs_wr_attempts;
+ #define YAFFS_TRACE_ALWAYS		0xF0000000
+ 
+ 
+-#define T(mask,p) do{ if((mask) & (yaffs_traceMask | YAFFS_TRACE_ALWAYS)) TOUT(p);} while(0)
++#define T(mask, p) do { if ((mask) & (yaffs_traceMask | YAFFS_TRACE_ALWAYS)) TOUT(p); } while (0)
+ 
+-#ifndef CONFIG_YAFFS_WINCE
+-#define YBUG() T(YAFFS_TRACE_BUG,(TSTR("==>> yaffs bug: " __FILE__ " %d" TENDSTR),__LINE__))
++#ifndef YBUG
++#define YBUG() do {T(YAFFS_TRACE_BUG, (TSTR("==>> yaffs bug: " __FILE__ " %d" TENDSTR), __LINE__)); } while (0)
+ #endif
+ 
+ #endif
diff --git a/target/linux/generic/patches-2.6.32/600-phy_extension.patch b/target/linux/generic/patches-2.6.32/600-phy_extension.patch
new file mode 100644
index 0000000000..f3841012a7
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/600-phy_extension.patch
@@ -0,0 +1,83 @@
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -299,6 +299,50 @@ int phy_ethtool_gset(struct phy_device *
+ }
+ EXPORT_SYMBOL(phy_ethtool_gset);
+ 
++int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr)
++{
++	u32 cmd;
++	int tmp;
++	struct ethtool_cmd ecmd = { ETHTOOL_GSET };
++	struct ethtool_value edata = { ETHTOOL_GLINK };
++
++	if (get_user(cmd, (u32 *) useraddr))
++		return -EFAULT;
++
++	switch (cmd) {
++	case ETHTOOL_GSET:
++		phy_ethtool_gset(phydev, &ecmd);
++		if (copy_to_user(useraddr, &ecmd, sizeof(ecmd)))
++			return -EFAULT;
++		return 0;
++
++	case ETHTOOL_SSET:
++		if (copy_from_user(&ecmd, useraddr, sizeof(ecmd)))
++			return -EFAULT;
++		return phy_ethtool_sset(phydev, &ecmd);
++
++	case ETHTOOL_NWAY_RST:
++		/* if autoneg is off, it's an error */
++		tmp = phy_read(phydev, MII_BMCR);
++		if (tmp & BMCR_ANENABLE) {
++			tmp |= (BMCR_ANRESTART);
++			phy_write(phydev, MII_BMCR, tmp);
++			return 0;
++		}
++		return -EINVAL;
++
++	case ETHTOOL_GLINK:
++		edata.data = (phy_read(phydev,
++				MII_BMSR) & BMSR_LSTATUS) ? 1 : 0;
++		if (copy_to_user(useraddr, &edata, sizeof(edata)))
++			return -EFAULT;
++		return 0;
++	}
++
++	return -EOPNOTSUPP;
++}
++EXPORT_SYMBOL(phy_ethtool_ioctl);
++
+ /**
+  * phy_mii_ioctl - generic PHY MII ioctl interface
+  * @phydev: the phy_device struct
+@@ -352,8 +396,8 @@ int phy_mii_ioctl(struct phy_device *phy
+ 		}
+ 
+ 		phy_write(phydev, mii_data->reg_num, val);
+-		
+-		if (mii_data->reg_num == MII_BMCR 
++
++		if (mii_data->reg_num == MII_BMCR
+ 				&& val & BMCR_RESET
+ 				&& phydev->drv->config_init) {
+ 			phy_scan_fixups(phydev);
+@@ -468,7 +512,7 @@ static void phy_force_reduction(struct p
+ 	int idx;
+ 
+ 	idx = phy_find_setting(phydev->speed, phydev->duplex);
+-	
++
+ 	idx++;
+ 
+ 	idx = phy_find_valid(idx, phydev->supported);
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -489,6 +489,7 @@ void phy_start_machine(struct phy_device
+ void phy_stop_machine(struct phy_device *phydev);
+ int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
+ int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
++int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr);
+ int phy_mii_ioctl(struct phy_device *phydev,
+ 		struct mii_ioctl_data *mii_data, int cmd);
+ int phy_start_interrupts(struct phy_device *phydev);
diff --git a/target/linux/generic/patches-2.6.32/601-phy-add-aneg-done-function.patch b/target/linux/generic/patches-2.6.32/601-phy-add-aneg-done-function.patch
new file mode 100644
index 0000000000..7ab076b4af
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/601-phy-add-aneg-done-function.patch
@@ -0,0 +1,45 @@
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -379,9 +379,18 @@ struct phy_driver {
+ 	 */
+ 	int (*config_aneg)(struct phy_device *phydev);
+ 
++	/* Determine if autonegotiation is done */
++	int (*aneg_done)(struct phy_device *phydev);
++
+ 	/* Determines the negotiated speed and duplex */
+ 	int (*read_status)(struct phy_device *phydev);
+ 
++	/* 
++	 * Update the value in phydev->link to reflect the 
++	 * current link value
++	 */
++	int (*update_link)(struct phy_device *phydev);
++
+ 	/* Clears any pending interrupts */
+ 	int (*ack_interrupt)(struct phy_device *phydev);
+ 
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -681,6 +681,9 @@ int genphy_update_link(struct phy_device
+ {
+ 	int status;
+ 
++	if (phydev->drv->update_link)
++		return phydev->drv->update_link(phydev);
++
+ 	/* Do a fake read */
+ 	status = phy_read(phydev, MII_BMSR);
+ 
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -107,6 +107,9 @@ static inline int phy_aneg_done(struct p
+ {
+ 	int retval;
+ 
++	if (phydev->drv->aneg_done)
++		return phydev->drv->aneg_done(phydev);
++
+ 	retval = phy_read(phydev, MII_BMSR);
+ 
+ 	return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE);
diff --git a/target/linux/generic/patches-2.6.32/620-phy_adm6996.patch b/target/linux/generic/patches-2.6.32/620-phy_adm6996.patch
new file mode 100644
index 0000000000..b3e469a8d6
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/620-phy_adm6996.patch
@@ -0,0 +1,24 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -88,6 +88,11 @@ config LSI_ET1011C_PHY
+ 	---help---
+ 	  Supports the LSI ET1011C PHY.
+ 
++config ADM6996_PHY
++	tristate "Driver for ADM6996 switches"
++	---help---
++	  Currently supports the ADM6996F switch
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -13,6 +13,7 @@ obj-$(CONFIG_VITESSE_PHY)	+= vitesse.o
+ obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
+ obj-$(CONFIG_BCM63XX_PHY)	+= bcm63xx.o
+ obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
++obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
diff --git a/target/linux/generic/patches-2.6.32/630-phy_packets.patch b/target/linux/generic/patches-2.6.32/630-phy_packets.patch
new file mode 100644
index 0000000000..fdfdac7c29
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/630-phy_packets.patch
@@ -0,0 +1,63 @@
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -146,6 +146,18 @@ int phy_scan_fixups(struct phy_device *p
+ }
+ EXPORT_SYMBOL(phy_scan_fixups);
+ 
++static int generic_receive_skb(struct sk_buff *skb)
++{
++	skb->protocol = eth_type_trans(skb, skb->dev);
++	return netif_receive_skb(skb);
++}
++
++static int generic_rx(struct sk_buff *skb)
++{
++	skb->protocol = eth_type_trans(skb, skb->dev);
++	return netif_rx(skb);
++}
++
+ struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
+ {
+ 	struct phy_device *dev;
+@@ -175,6 +187,8 @@ struct phy_device* phy_device_create(str
+ 	dev_set_name(&dev->dev, PHY_ID_FMT, bus->id, addr);
+ 
+ 	dev->state = PHY_DOWN;
++	dev->netif_receive_skb = &generic_receive_skb;
++	dev->netif_rx = &generic_rx;
+ 
+ 	mutex_init(&dev->lock);
+ 
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -325,6 +325,20 @@ struct phy_device {
+ 	void (*adjust_link)(struct net_device *dev);
+ 
+ 	void (*adjust_state)(struct net_device *dev);
++
++	/*
++	 * By default these point to the original functions
++	 * with the same name. adding them to the phy_device
++	 * allows the phy driver to override them for packet
++	 * mangling if the ethernet driver supports it
++	 * This is required to support some really horrible
++	 * switches such as the Marvell 88E6060
++	 */
++	int (*netif_receive_skb)(struct sk_buff *skb);
++	int (*netif_rx)(struct sk_buff *skb);
++
++	/* alignment offset for packets */
++	int pkt_align;
+ };
+ #define to_phy_device(d) container_of(d, struct phy_device, dev)
+ 
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -807,6 +807,7 @@ struct net_device
+ 	void			*ax25_ptr;	/* AX.25 specific data */
+ 	struct wireless_dev	*ieee80211_ptr;	/* IEEE 802.11 specific data,
+ 						   assign before registering */
++	void			*phy_ptr; /* PHY device specific data */
+ 
+ /*
+  * Cache line mostly used on receive path (including eth_type_trans())
diff --git a/target/linux/generic/patches-2.6.32/640-br2684_backport_routed.patch b/target/linux/generic/patches-2.6.32/640-br2684_backport_routed.patch
new file mode 100644
index 0000000000..28dd74dd7c
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/640-br2684_backport_routed.patch
@@ -0,0 +1,42 @@
+commit 2e302ebfeac04beb5a5d6af1ac583c6a1fb76d1a
+Author: chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
+Date:   Fri Dec 4 11:06:32 2009 +0000
+
+    atm: [br2684] allow routed mode operation again
+    
+    in routed mode, we don't have a hardware address so netdev_ops doesnt
+    need to validate our hardware address via .ndo_validate_addr
+    
+    Reported-by: Manuel Fuentes <mfuentes@agenciaefe.com>
+    Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
+    Signed-off-by: David S. Miller <davem@davemloft.net>
+
+--- a/net/atm/br2684.c
++++ b/net/atm/br2684.c
+@@ -554,6 +554,12 @@ static const struct net_device_ops br268
+ 	.ndo_validate_addr	= eth_validate_addr,
+ };
+ 
++static const struct net_device_ops br2684_netdev_ops_routed = {
++	.ndo_start_xmit 	= br2684_start_xmit,
++	.ndo_set_mac_address	= br2684_mac_addr,
++	.ndo_change_mtu		= eth_change_mtu
++};
++
+ static void br2684_setup(struct net_device *netdev)
+ {
+ 	struct br2684_dev *brdev = BRPRIV(netdev);
+@@ -569,11 +575,10 @@ static void br2684_setup(struct net_devi
+ static void br2684_setup_routed(struct net_device *netdev)
+ {
+ 	struct br2684_dev *brdev = BRPRIV(netdev);
+-	brdev->net_dev = netdev;
+ 
++	brdev->net_dev = netdev;
+ 	netdev->hard_header_len = 0;
+-
+-	netdev->netdev_ops = &br2684_netdev_ops;
++	netdev->netdev_ops = &br2684_netdev_ops_routed;
+ 	netdev->addr_len = 0;
+ 	netdev->mtu = 1500;
+ 	netdev->type = ARPHRD_PPP;
diff --git a/target/linux/generic/patches-2.6.32/650-swconfig.patch b/target/linux/generic/patches-2.6.32/650-swconfig.patch
new file mode 100644
index 0000000000..6825037ce9
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/650-swconfig.patch
@@ -0,0 +1,25 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -13,6 +13,12 @@ menuconfig PHYLIB
+ 
+ if PHYLIB
+ 
++config SWCONFIG
++	tristate "Switch configuration API"
++	---help---
++	  Switch configuration API using netlink. This allows
++	  you to configure the VLAN features of certain switches.
++
+ comment "MII PHY device drivers"
+ 
+ config MARVELL_PHY
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -3,6 +3,7 @@
+ libphy-objs			:= phy.o phy_device.o mdio_bus.o
+ 
+ obj-$(CONFIG_PHYLIB)		+= libphy.o
++obj-$(CONFIG_SWCONFIG)		+= swconfig.o
+ obj-$(CONFIG_MARVELL_PHY)	+= marvell.o
+ obj-$(CONFIG_DAVICOM_PHY)	+= davicom.o
+ obj-$(CONFIG_CICADA_PHY)	+= cicada.o
diff --git a/target/linux/generic/patches-2.6.32/651-swconfig-2.6.32-fix.patch b/target/linux/generic/patches-2.6.32/651-swconfig-2.6.32-fix.patch
new file mode 100644
index 0000000000..b86e259c8d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/651-swconfig-2.6.32-fix.patch
@@ -0,0 +1,29 @@
+--- a/drivers/net/phy/swconfig.c
++++ b/drivers/net/phy/swconfig.c
+@@ -335,7 +335,7 @@ swconfig_send_multipart(struct swconfig_
+ 			if (cb->close(cb, arg) < 0)
+ 				goto error;
+ 		}
+-		err = genlmsg_unicast(cb->msg, info->snd_pid);
++		err = genlmsg_reply(cb->msg, info);
+ 		cb->msg = NULL;
+ 		if (err < 0)
+ 			goto error;
+@@ -419,7 +419,7 @@ swconfig_list_attrs(struct sk_buff *skb,
+ 	if (!cb.msg)
+ 		return 0;
+ 
+-	return genlmsg_unicast(cb.msg, info->snd_pid);
++	return genlmsg_reply(cb.msg, info);
+ 
+ error:
+ 	if (cb.msg)
+@@ -732,7 +732,7 @@ swconfig_get_attr(struct sk_buff *skb, s
+ 		goto nla_put_failure;
+ 
+ 	swconfig_put_dev(dev);
+-	return genlmsg_unicast(msg, info->snd_pid);
++	return genlmsg_reply(msg, info);
+ 
+ nla_put_failure:
+ 	if (msg)
diff --git a/target/linux/generic/patches-2.6.32/660-phy_mvswitch.patch b/target/linux/generic/patches-2.6.32/660-phy_mvswitch.patch
new file mode 100644
index 0000000000..36551fd570
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/660-phy_mvswitch.patch
@@ -0,0 +1,22 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -99,6 +99,9 @@ config ADM6996_PHY
+ 	---help---
+ 	  Currently supports the ADM6996F switch
+ 
++config MVSWITCH_PHY
++	tristate "Driver for Marvell 88E6060 switches"
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -15,6 +15,7 @@ obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
+ obj-$(CONFIG_BCM63XX_PHY)	+= bcm63xx.o
+ obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
+ obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
++obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
diff --git a/target/linux/generic/patches-2.6.32/670-phy_ip175c.patch b/target/linux/generic/patches-2.6.32/670-phy_ip175c.patch
new file mode 100644
index 0000000000..a9452b3bbe
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/670-phy_ip175c.patch
@@ -0,0 +1,23 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -102,6 +102,10 @@ config ADM6996_PHY
+ config MVSWITCH_PHY
+ 	tristate "Driver for Marvell 88E6060 switches"
+ 
++config IP17XX_PHY
++	tristate "Driver for IC+ IP17xx switches"
++	select SWCONFIG
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -16,6 +16,7 @@ obj-$(CONFIG_BCM63XX_PHY)	+= bcm63xx.o
+ obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
+ obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
+ obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
++obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
diff --git a/target/linux/generic/patches-2.6.32/680-phy_ar8216.patch b/target/linux/generic/patches-2.6.32/680-phy_ar8216.patch
new file mode 100644
index 0000000000..0566600a0e
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/680-phy_ar8216.patch
@@ -0,0 +1,23 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -106,6 +106,10 @@ config IP17XX_PHY
+ 	tristate "Driver for IC+ IP17xx switches"
+ 	select SWCONFIG
+ 
++config AR8216_PHY
++	tristate "Driver for Atheros AR8216 switches"
++	select SWCONFIG
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -18,6 +18,7 @@ obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
+ obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
+ obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
++obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
diff --git a/target/linux/generic/patches-2.6.32/690-phy_rtl8306.patch b/target/linux/generic/patches-2.6.32/690-phy_rtl8306.patch
new file mode 100644
index 0000000000..36ce9dfce7
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/690-phy_rtl8306.patch
@@ -0,0 +1,23 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -110,6 +110,10 @@ config AR8216_PHY
+ 	tristate "Driver for Atheros AR8216 switches"
+ 	select SWCONFIG
+ 
++config RTL8306_PHY
++	tristate "Driver for Realtek RTL8306S switches"
++	select SWCONFIG
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -19,6 +19,7 @@ obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
+ obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
++obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
diff --git a/target/linux/generic/patches-2.6.32/691-phy_rtl8366.patch b/target/linux/generic/patches-2.6.32/691-phy_rtl8366.patch
new file mode 100644
index 0000000000..56050912c1
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/691-phy_rtl8366.patch
@@ -0,0 +1,44 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -141,4 +141,29 @@ config MDIO_GPIO
+ 	  To compile this driver as a module, choose M here: the module
+ 	  will be called mdio-gpio.
+ 
++config RTL8366_SMI
++	tristate "Driver for the RTL8366 SMI interface"
++	depends on GENERIC_GPIO
++	---help---
++	  This module implements the SMI interface protocol which is used
++	  by some RTL8366 ethernet switch devices via the generic GPIO API.
++
++if RTL8366_SMI
++
++config RTL8366S_PHY
++	tristate "Driver for the Realtek RTL8366S switch"
++	select SWCONFIG
++
++config RTL8366RB_PHY
++	tristate "Driver for the Realtek RTL8366RB switch"
++	select SWCONFIG
++
++config RTL8366S_PHY_DEBUG_FS
++	bool "RTL8366 switch driver DEBUG_FS support"
++	depends on RTL8366S_PHY || RTL8366RB_PHY
++	depends on DEBUG_FS
++	default n
++
++endif # RTL8366_SMI
++
+ endif # PHYLIB
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -20,6 +20,9 @@ obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
+ obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
++obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o
++obj-$(CONFIG_RTL8366S_PHY)	+= rtl8366s.o
++obj-$(CONFIG_RTL8366RB_PHY)	+= rtl8366rb.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
diff --git a/target/linux/generic/patches-2.6.32/700-rtc7301.patch b/target/linux/generic/patches-2.6.32/700-rtc7301.patch
new file mode 100644
index 0000000000..dfaad429f8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/700-rtc7301.patch
@@ -0,0 +1,250 @@
+--- a/drivers/rtc/Kconfig
++++ b/drivers/rtc/Kconfig
+@@ -574,6 +574,15 @@ config RTC_DRV_AB3100
+ 	  support. This chip contains a battery- and capacitor-backed RTC.
+ 
+ 
++config RTC_DRV_RTC7301
++	tristate "Epson RTC-7301 SF/DG"
++	help
++	  If you say Y here you will get support for the
++	  Epson RTC-7301 SF/DG RTC chips.
++
++	  This driver can also be built as a module. If so, the module
++	  will be called rtc-7301.
++
+ comment "on-CPU RTC drivers"
+ 
+ config RTC_DRV_OMAP
+--- a/drivers/rtc/Makefile
++++ b/drivers/rtc/Makefile
+@@ -67,6 +67,7 @@ obj-$(CONFIG_RTC_DRV_R9701)	+= rtc-r9701
+ obj-$(CONFIG_RTC_DRV_RS5C313)	+= rtc-rs5c313.o
+ obj-$(CONFIG_RTC_DRV_RS5C348)	+= rtc-rs5c348.o
+ obj-$(CONFIG_RTC_DRV_RS5C372)	+= rtc-rs5c372.o
++obj-$(CONFIG_RTC_DRV_RTC7301)	+= rtc-rtc7301.o
+ obj-$(CONFIG_RTC_DRV_RX8025)	+= rtc-rx8025.o
+ obj-$(CONFIG_RTC_DRV_RX8581)	+= rtc-rx8581.o
+ obj-$(CONFIG_RTC_DRV_S35390A)	+= rtc-s35390a.o
+--- /dev/null
++++ b/drivers/rtc/rtc-rtc7301.c
+@@ -0,0 +1,219 @@
++/*
++ * Driver for Epson RTC-7301SF/DG
++ *
++ * Copyright (C) 2009 Jose Vasconcellos
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/rtc.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/delay.h>
++#include <linux/bcd.h>
++
++#define RTC_NAME "rtc7301"
++#define RTC_VERSION "0.1"
++
++/* Epson RTC-7301 register addresses */
++#define RTC7301_SEC		0x00
++#define RTC7301_SEC10		0x01
++#define RTC7301_MIN		0x02
++#define RTC7301_MIN10		0x03
++#define RTC7301_HOUR		0x04
++#define RTC7301_HOUR10		0x05
++#define RTC7301_WEEKDAY		0x06
++#define RTC7301_DAY		0x07
++#define RTC7301_DAY10		0x08
++#define RTC7301_MON		0x09
++#define RTC7301_MON10		0x0A
++#define RTC7301_YEAR		0x0B
++#define RTC7301_YEAR10		0x0C
++#define RTC7301_YEAR100		0x0D
++#define RTC7301_YEAR1000	0x0E
++#define RTC7301_CTRLREG		0x0F
++
++static uint8_t __iomem *rtc7301_base;
++
++#define read_reg(offset) (readb(rtc7301_base + offset) & 0xf)
++#define write_reg(offset, data) writeb(data, rtc7301_base + (offset))
++
++#define rtc7301_isbusy() (read_reg(RTC7301_CTRLREG) & 1)
++
++static void rtc7301_init_settings(void)
++{
++	int i;
++
++	write_reg(RTC7301_CTRLREG, 2);
++	write_reg(RTC7301_YEAR1000, 2);
++	udelay(122);
++
++	/* bank 1 */
++	write_reg(RTC7301_CTRLREG, 6);
++	for (i=0; i<15; i++)
++		write_reg(i, 0);
++
++	/* bank 2 */
++	write_reg(RTC7301_CTRLREG, 14);
++	for (i=0; i<15; i++)
++		write_reg(i, 0);
++	write_reg(RTC7301_CTRLREG, 0);
++}
++
++static int rtc7301_get_datetime(struct device *dev, struct rtc_time *dt)
++{
++	int cnt;
++	uint8_t buf[16];
++
++	cnt = 0;
++	while (rtc7301_isbusy()) {
++		udelay(244);
++		if (cnt++ > 100) {
++			dev_err(dev, "%s: timeout error %x\n", __func__, rtc7301_base[RTC7301_CTRLREG]);
++			return -EIO;
++		}
++	}
++
++	for (cnt=0; cnt<16; cnt++)
++		buf[cnt] = read_reg(cnt);
++
++	if (buf[RTC7301_SEC10] & 8) {
++		dev_err(dev, "%s: RTC not set\n", __func__);
++		return -EINVAL;
++	}
++
++	memset(dt, 0, sizeof(*dt));
++
++	dt->tm_sec =  buf[RTC7301_SEC] + buf[RTC7301_SEC10]*10;
++	dt->tm_min =  buf[RTC7301_MIN] + buf[RTC7301_MIN10]*10;
++	dt->tm_hour = buf[RTC7301_HOUR] + buf[RTC7301_HOUR10]*10;
++
++	dt->tm_mday = buf[RTC7301_DAY] + buf[RTC7301_DAY10]*10;
++	dt->tm_mon =  buf[RTC7301_MON] + buf[RTC7301_MON10]*10 - 1;
++	dt->tm_year = buf[RTC7301_YEAR] + buf[RTC7301_YEAR10]*10 +
++		      buf[RTC7301_YEAR100]*100 +
++		      ((buf[RTC7301_YEAR1000] & 3)*1000) - 1900;
++
++	/* the rtc device may contain illegal values on power up
++	 * according to the data sheet. make sure they are valid.
++	 */
++
++	return rtc_valid_tm(dt);
++}
++
++static int rtc7301_set_datetime(struct device *dev, struct rtc_time *dt)
++{
++	int data;
++
++	data = dt->tm_year + 1900;
++	if (data >= 2100 || data < 1900)
++		return -EINVAL;
++
++	write_reg(RTC7301_CTRLREG, 2);
++       	udelay(122);
++
++	data = bin2bcd(dt->tm_sec);
++	write_reg(RTC7301_SEC, data);
++	write_reg(RTC7301_SEC10, (data >> 4));
++
++	data = bin2bcd(dt->tm_min);
++	write_reg(RTC7301_MIN, data );
++	write_reg(RTC7301_MIN10, (data >> 4));
++
++	data = bin2bcd(dt->tm_hour);
++	write_reg(RTC7301_HOUR, data);
++	write_reg(RTC7301_HOUR10, (data >> 4));
++
++	data = bin2bcd(dt->tm_mday);
++	write_reg(RTC7301_DAY, data);
++	write_reg(RTC7301_DAY10, (data>> 4));
++
++	data = bin2bcd(dt->tm_mon + 1);
++	write_reg(RTC7301_MON, data);
++	write_reg(RTC7301_MON10, (data >> 4));
++
++	data = bin2bcd(dt->tm_year % 100);
++	write_reg(RTC7301_YEAR, data);
++	write_reg(RTC7301_YEAR10, (data >> 4));
++	data = bin2bcd((1900 + dt->tm_year) / 100);
++	write_reg(RTC7301_YEAR100, data);
++
++	data = bin2bcd(dt->tm_wday);
++	write_reg(RTC7301_WEEKDAY, data);
++
++	write_reg(RTC7301_CTRLREG, 0);
++
++	return 0;
++}
++
++static const struct rtc_class_ops rtc7301_rtc_ops = {
++	.read_time	= rtc7301_get_datetime,
++	.set_time	= rtc7301_set_datetime,
++};
++
++static int __devinit rtc7301_probe(struct platform_device *pdev)
++{
++	struct rtc_device *rtc;
++	struct resource *res;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res)
++		return -ENOENT;
++
++	rtc7301_base = ioremap_nocache(res->start, 0x1000 /*res->end - res->start + 1*/);
++	if (!rtc7301_base)
++		return -EINVAL;
++
++	rtc = rtc_device_register(RTC_NAME, &pdev->dev,
++				&rtc7301_rtc_ops, THIS_MODULE);
++	if (IS_ERR(rtc)) {
++		iounmap(rtc7301_base);
++		return PTR_ERR(rtc);
++	}
++
++	platform_set_drvdata(pdev, rtc);
++
++	rtc7301_init_settings();
++	return 0;
++}
++
++static int __devexit rtc7301_remove(struct platform_device *pdev)
++{
++	struct rtc_device *rtc = platform_get_drvdata(pdev);
++
++	if (rtc)
++		rtc_device_unregister(rtc);
++	if (rtc7301_base)
++		iounmap(rtc7301_base);
++	return 0;
++}
++
++static struct platform_driver rtc7301_driver = {
++	.driver = {
++		.name	= RTC_NAME,
++		.owner	= THIS_MODULE,
++	},
++	.probe	= rtc7301_probe,
++	.remove = __devexit_p(rtc7301_remove),
++};
++
++static __init int rtc7301_init(void)
++{
++	return platform_driver_register(&rtc7301_driver);
++}
++module_init(rtc7301_init);
++
++static __exit void rtc7301_exit(void)
++{
++	platform_driver_unregister(&rtc7301_driver);
++}
++module_exit(rtc7301_exit);
++
++MODULE_DESCRIPTION("Epson 7301 RTC driver");
++MODULE_AUTHOR("Jose Vasconcellos <jvasco@verizon.net>");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:" RTC_NAME);
++MODULE_VERSION(RTC_VERSION);
diff --git a/target/linux/generic/patches-2.6.32/750-glamo-headers.patch b/target/linux/generic/patches-2.6.32/750-glamo-headers.patch
new file mode 100644
index 0000000000..419d98a424
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/750-glamo-headers.patch
@@ -0,0 +1,21 @@
+--- a/include/linux/fb.h
++++ b/include/linux/fb.h
+@@ -124,6 +124,7 @@ struct dentry;
+ #define FB_ACCEL_TRIDENT_BLADE3D 52	/* Trident Blade3D		*/
+ #define FB_ACCEL_TRIDENT_BLADEXP 53	/* Trident BladeXP		*/
+ #define FB_ACCEL_CIRRUS_ALPINE   53	/* Cirrus Logic 543x/544x/5480	*/
++#define FB_ACCEL_GLAMO		50	/* SMedia Glamo                 */
+ #define FB_ACCEL_NEOMAGIC_NM2070 90	/* NeoMagic NM2070              */
+ #define FB_ACCEL_NEOMAGIC_NM2090 91	/* NeoMagic NM2090              */
+ #define FB_ACCEL_NEOMAGIC_NM2093 92	/* NeoMagic NM2093              */
+--- a/include/linux/Kbuild
++++ b/include/linux/Kbuild
+@@ -76,6 +76,8 @@ header-y += genetlink.h
+ header-y += gen_stats.h
+ header-y += gfs2_ondisk.h
+ header-y += gigaset_dev.h
++header-y += glamofb.h
++header-y += glamo-engine.h
+ header-y += hysdn_if.h
+ header-y += i2o-dev.h
+ header-y += i8k.h
diff --git a/target/linux/generic/patches-2.6.32/801-usb_serial_endpoint_size.patch b/target/linux/generic/patches-2.6.32/801-usb_serial_endpoint_size.patch
new file mode 100644
index 0000000000..fea67c49f6
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/801-usb_serial_endpoint_size.patch
@@ -0,0 +1,25 @@
+--- a/drivers/usb/serial/usb-serial.c
++++ b/drivers/usb/serial/usb-serial.c
+@@ -61,6 +61,7 @@ static struct usb_driver usb_serial_driv
+    drivers depend on it.
+ */
+ 
++static ushort maxSize = 0;
+ static int debug;
+ /* initially all NULL */
+ static struct usb_serial *serial_table[SERIAL_TTY_MINORS];
+@@ -942,7 +943,7 @@ int usb_serial_probe(struct usb_interfac
+ 			dev_err(&interface->dev, "No free urbs available\n");
+ 			goto probe_error;
+ 		}
+-		buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
++		buffer_size = (endpoint->wMaxPacketSize > maxSize) ? endpoint->wMaxPacketSize : maxSize;
+ 		port->bulk_in_size = buffer_size;
+ 		port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
+ 		port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
+@@ -1386,3 +1387,5 @@ MODULE_LICENSE("GPL");
+ 
+ module_param(debug, bool, S_IRUGO | S_IWUSR);
+ MODULE_PARM_DESC(debug, "Debug enabled or not");
++module_param(maxSize, ushort,0);
++MODULE_PARM_DESC(maxSize,"User specified USB endpoint size");
diff --git a/target/linux/generic/patches-2.6.32/840-unable_to_open_console.patch b/target/linux/generic/patches-2.6.32/840-unable_to_open_console.patch
new file mode 100644
index 0000000000..8d90396761
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/840-unable_to_open_console.patch
@@ -0,0 +1,11 @@
+--- a/init/main.c
++++ b/init/main.c
+@@ -807,7 +807,7 @@ static noinline int init_post(void)
+ 	numa_default_policy();
+ 
+ 	if (sys_open((const char __user *) "/dev/console", O_RDWR, 0) < 0)
+-		printk(KERN_WARNING "Warning: unable to open an initial console.\n");
++		printk(KERN_WARNING "Please be patient, while OpenWrt loads ...\n");
+ 
+ 	(void) sys_dup(0);
+ 	(void) sys_dup(0);
diff --git a/target/linux/generic/patches-2.6.32/902-darwin_scripts_include.patch b/target/linux/generic/patches-2.6.32/902-darwin_scripts_include.patch
new file mode 100644
index 0000000000..6d4b08cbc5
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/902-darwin_scripts_include.patch
@@ -0,0 +1,102 @@
+--- a/scripts/genksyms/parse.c_shipped
++++ b/scripts/genksyms/parse.c_shipped
+@@ -160,7 +160,9 @@
+ 
+ 
+ #include <assert.h>
++#ifndef __APPLE__
+ #include <malloc.h>
++#endif
+ #include "genksyms.h"
+ 
+ static int is_typedef;
+--- a/scripts/genksyms/parse.y
++++ b/scripts/genksyms/parse.y
+@@ -24,7 +24,9 @@
+ %{
+ 
+ #include <assert.h>
++#ifndef __APPLE__
+ #include <malloc.h>
++#endif
+ #include "genksyms.h"
+ 
+ static int is_typedef;
+--- a/scripts/kallsyms.c
++++ b/scripts/kallsyms.c
+@@ -22,6 +22,35 @@
+ #include <stdlib.h>
+ #include <string.h>
+ #include <ctype.h>
++#ifdef __APPLE__
++/* Darwin has no memmem implementation, this one is ripped of the uClibc-0.9.28 source */
++void *memmem (const void *haystack, size_t haystack_len,
++                          const void *needle,  size_t needle_len)
++{
++  const char *begin;
++  const char *const last_possible
++    = (const char *) haystack + haystack_len - needle_len;
++
++  if (needle_len == 0)
++    /* The first occurrence of the empty string is deemed to occur at
++       the beginning of the string.  */
++    return (void *) haystack;
++
++  /* Sanity check, otherwise the loop might search through the whole
++     memory.  */
++  if (__builtin_expect (haystack_len < needle_len, 0))
++    return NULL;
++
++  for (begin = (const char *) haystack; begin <= last_possible; ++begin)
++    if (begin[0] == ((const char *) needle)[0] &&
++        !memcmp ((const void *) &begin[1],
++                 (const void *) ((const char *) needle + 1),
++                 needle_len - 1))
++      return (void *) begin;
++
++  return NULL;
++}
++#endif
+ 
+ #ifndef ARRAY_SIZE
+ #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof(arr[0]))
+--- a/scripts/kconfig/Makefile
++++ b/scripts/kconfig/Makefile
+@@ -129,6 +129,9 @@ check-lxdialog  := $(srctree)/$(src)/lxd
+ # we really need to do so. (Do not call gcc as part of make mrproper)
+ HOST_EXTRACFLAGS = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags)
+ HOST_LOADLIBES   = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
++ifeq ($(shell uname -s),Darwin)
++HOST_LOADLIBES  += -lncurses
++endif
+ 
+ HOST_EXTRACFLAGS += -DLOCALE
+ 
+--- a/scripts/mod/mk_elfconfig.c
++++ b/scripts/mod/mk_elfconfig.c
+@@ -1,7 +1,11 @@
+ #include <stdio.h>
+ #include <stdlib.h>
+ #include <string.h>
++#ifndef __APPLE__
+ #include <elf.h>
++#else
++#include "../../../../../tools/sstrip/include/elf.h"
++#endif
+ 
+ int
+ main(int argc, char **argv)
+--- a/scripts/mod/modpost.h
++++ b/scripts/mod/modpost.h
+@@ -7,7 +7,11 @@
+ #include <sys/mman.h>
+ #include <fcntl.h>
+ #include <unistd.h>
++#if !(defined(__APPLE__) || defined(__CYGWIN__))
+ #include <elf.h>
++#else
++#include "../../../../../tools/sstrip/include/elf.h"
++#endif
+ 
+ #include "elfconfig.h"
+ 
diff --git a/target/linux/generic/patches-2.6.32/903-hostap_txpower.patch b/target/linux/generic/patches-2.6.32/903-hostap_txpower.patch
new file mode 100644
index 0000000000..7552ceb33d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/903-hostap_txpower.patch
@@ -0,0 +1,154 @@
+--- a/drivers/net/wireless/hostap/hostap_ap.c
++++ b/drivers/net/wireless/hostap/hostap_ap.c
+@@ -2335,13 +2335,13 @@ int prism2_ap_get_sta_qual(local_info_t 
+ 		addr[count].sa_family = ARPHRD_ETHER;
+ 		memcpy(addr[count].sa_data, sta->addr, ETH_ALEN);
+ 		if (sta->last_rx_silence == 0)
+-			qual[count].qual = sta->last_rx_signal < 27 ?
+-				0 : (sta->last_rx_signal - 27) * 92 / 127;
++                        qual[count].qual = (sta->last_rx_signal - 156) == 0 ?
++                                0 : (sta->last_rx_signal - 156) * 92 / 64;
+ 		else
+-			qual[count].qual = sta->last_rx_signal -
+-				sta->last_rx_silence - 35;
+-		qual[count].level = HFA384X_LEVEL_TO_dBm(sta->last_rx_signal);
+-		qual[count].noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence);
++                        qual[count].qual = (sta->last_rx_signal -
++                                sta->last_rx_silence) * 92 / 64;
++                qual[count].level = sta->last_rx_signal;
++                qual[count].noise = sta->last_rx_silence;
+ 		qual[count].updated = sta->last_rx_updated;
+ 
+ 		sta->last_rx_updated = IW_QUAL_DBM;
+@@ -2407,13 +2407,13 @@ int prism2_ap_translate_scan(struct net_
+ 		memset(&iwe, 0, sizeof(iwe));
+ 		iwe.cmd = IWEVQUAL;
+ 		if (sta->last_rx_silence == 0)
+-			iwe.u.qual.qual = sta->last_rx_signal < 27 ?
+-				0 : (sta->last_rx_signal - 27) * 92 / 127;
++	                iwe.u.qual.qual = (sta->last_rx_signal -156) == 0 ?
++	                        0 : (sta->last_rx_signal - 156) * 92 / 64;
+ 		else
+-			iwe.u.qual.qual = sta->last_rx_signal -
+-				sta->last_rx_silence - 35;
+-		iwe.u.qual.level = HFA384X_LEVEL_TO_dBm(sta->last_rx_signal);
+-		iwe.u.qual.noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence);
++                        iwe.u.qual.qual = (sta->last_rx_signal -
++                                sta->last_rx_silence) * 92 / 64;
++                iwe.u.qual.level = sta->last_rx_signal;
++                iwe.u.qual.noise = sta->last_rx_silence;
+ 		iwe.u.qual.updated = sta->last_rx_updated;
+ 		iwe.len = IW_EV_QUAL_LEN;
+ 		current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+--- a/drivers/net/wireless/hostap/hostap_config.h
++++ b/drivers/net/wireless/hostap/hostap_config.h
+@@ -45,4 +45,9 @@
+  */
+ /* #define PRISM2_NO_STATION_MODES */
+ 
++/* Enable TX power Setting functions
++ * (min att = -128 , max att =  127)
++ */
++#define RAW_TXPOWER_SETTING
++
+ #endif /* HOSTAP_CONFIG_H */
+--- a/drivers/net/wireless/hostap/hostap.h
++++ b/drivers/net/wireless/hostap/hostap.h
+@@ -90,6 +90,7 @@ extern const struct iw_handler_def hosta
+ extern const struct ethtool_ops prism2_ethtool_ops;
+ 
+ int hostap_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
++int hostap_restore_power(struct net_device *dev);
+ 
+ 
+ #endif /* HOSTAP_H */
+--- a/drivers/net/wireless/hostap/hostap_hw.c
++++ b/drivers/net/wireless/hostap/hostap_hw.c
+@@ -932,6 +932,7 @@ static int hfa384x_set_rid(struct net_de
+ 			prism2_hw_reset(dev);
+ 	}
+ 
++	hostap_restore_power(dev);
+ 	return res;
+ }
+ 
+--- a/drivers/net/wireless/hostap/hostap_info.c
++++ b/drivers/net/wireless/hostap/hostap_info.c
+@@ -432,6 +432,11 @@ static void handle_info_queue_linkstatus
+ 	}
+ 
+ 	/* Get BSSID if we have a valid AP address */
++
++	if ( val == HFA384X_LINKSTATUS_CONNECTED ||
++	     val == HFA384X_LINKSTATUS_DISCONNECTED )
++			hostap_restore_power(local->dev);
++
+ 	if (connected) {
+ 		netif_carrier_on(local->dev);
+ 		netif_carrier_on(local->ddev);
+--- a/drivers/net/wireless/hostap/hostap_ioctl.c
++++ b/drivers/net/wireless/hostap/hostap_ioctl.c
+@@ -1476,23 +1476,20 @@ static int prism2_txpower_hfa386x_to_dBm
+ 		val = 255;
+ 
+ 	tmp = val;
+-	tmp >>= 2;
+ 
+-	return -12 - tmp;
++	return tmp;
+ }
+ 
+ static u16 prism2_txpower_dBm_to_hfa386x(int val)
+ {
+ 	signed char tmp;
+ 
+-	if (val > 20)
+-		return 128;
+-	else if (val < -43)
++	if (val > 127)
+ 		return 127;
++	else if (val < -128)
++		return 128;
+ 
+ 	tmp = val;
+-	tmp = -12 - tmp;
+-	tmp <<= 2;
+ 
+ 	return (unsigned char) tmp;
+ }
+@@ -4056,3 +4053,35 @@ int hostap_ioctl(struct net_device *dev,
+ 
+ 	return ret;
+ }
++
++/* BUG FIX: Restore power setting value when lost due to F/W bug */
++
++int hostap_restore_power(struct net_device *dev)
++{
++        struct hostap_interface *iface = netdev_priv(dev);
++       local_info_t *local = iface->local;
++
++       u16 val;
++       int ret = 0;
++
++       if (local->txpower_type == PRISM2_TXPOWER_OFF) {
++                       val = 0xff; /* use all standby and sleep modes */
++                       ret = local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF,
++                                              HFA386X_CR_A_D_TEST_MODES2,
++                                              &val, NULL);
++       }
++
++#ifdef RAW_TXPOWER_SETTING
++       if (local->txpower_type == PRISM2_TXPOWER_FIXED) {
++               val = HFA384X_TEST_CFG_BIT_ALC;
++               local->func->cmd(dev, HFA384X_CMDCODE_TEST |
++                                (HFA384X_TEST_CFG_BITS << 8), 0, &val, NULL);
++               val = prism2_txpower_dBm_to_hfa386x(local->txpower);
++               ret = (local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF,
++                            HFA386X_CR_MANUAL_TX_POWER, &val, NULL));
++       }
++#endif /* RAW_TXPOWER_SETTING */
++       return (ret ? -EOPNOTSUPP : 0);
++}
++
++EXPORT_SYMBOL(hostap_restore_power);
diff --git a/target/linux/generic/patches-2.6.32/903-stddef_include.patch b/target/linux/generic/patches-2.6.32/903-stddef_include.patch
new file mode 100644
index 0000000000..7fe248d8d3
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/903-stddef_include.patch
@@ -0,0 +1,17 @@
+--- a/include/linux/stddef.h
++++ b/include/linux/stddef.h
+@@ -16,6 +16,7 @@ enum {
+ 	false	= 0,
+ 	true	= 1
+ };
++#endif /* __KERNEL__ */
+ 
+ #undef offsetof
+ #ifdef __compiler_offsetof
+@@ -23,6 +24,5 @@ enum {
+ #else
+ #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
+ #endif
+-#endif /* __KERNEL__ */
+ 
+ #endif
diff --git a/target/linux/generic/patches-2.6.32/905-i386_build.patch b/target/linux/generic/patches-2.6.32/905-i386_build.patch
new file mode 100644
index 0000000000..c701fdaa95
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/905-i386_build.patch
@@ -0,0 +1,10 @@
+--- a/arch/x86/boot/tools/build.c
++++ b/arch/x86/boot/tools/build.c
+@@ -29,7 +29,6 @@
+ #include <stdarg.h>
+ #include <sys/types.h>
+ #include <sys/stat.h>
+-#include <sys/sysmacros.h>
+ #include <unistd.h>
+ #include <fcntl.h>
+ #include <sys/mman.h>
diff --git a/target/linux/generic/patches-2.6.32/920-01-hotpluggable-spi-gpio.patch b/target/linux/generic/patches-2.6.32/920-01-hotpluggable-spi-gpio.patch
new file mode 100644
index 0000000000..b10bc9a65e
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/920-01-hotpluggable-spi-gpio.patch
@@ -0,0 +1,60 @@
+Fix spi-gpio for hotplug.
+
+--mb
+
+
+
+--- a/drivers/spi/spi_gpio.c
++++ b/drivers/spi/spi_gpio.c
+@@ -218,7 +218,7 @@ static void spi_gpio_cleanup(struct spi_
+ 	spi_bitbang_cleanup(spi);
+ }
+ 
+-static int __init spi_gpio_alloc(unsigned pin, const char *label, bool is_in)
++static int __devinit spi_gpio_alloc(unsigned pin, const char *label, bool is_in)
+ {
+ 	int value;
+ 
+@@ -232,7 +232,7 @@ static int __init spi_gpio_alloc(unsigne
+ 	return value;
+ }
+ 
+-static int __init
++static int __devinit
+ spi_gpio_request(struct spi_gpio_platform_data *pdata, const char *label)
+ {
+ 	int value;
+@@ -261,7 +261,7 @@ done:
+ 	return value;
+ }
+ 
+-static int __init spi_gpio_probe(struct platform_device *pdev)
++static int __devinit spi_gpio_probe(struct platform_device *pdev)
+ {
+ 	int				status;
+ 	struct spi_master		*master;
+@@ -317,7 +317,7 @@ gpio_free:
+ 	return status;
+ }
+ 
+-static int __exit spi_gpio_remove(struct platform_device *pdev)
++static int __devexit spi_gpio_remove(struct platform_device *pdev)
+ {
+ 	struct spi_gpio			*spi_gpio;
+ 	struct spi_gpio_platform_data	*pdata;
+@@ -344,12 +344,13 @@ MODULE_ALIAS("platform:" DRIVER_NAME);
+ static struct platform_driver spi_gpio_driver = {
+ 	.driver.name	= DRIVER_NAME,
+ 	.driver.owner	= THIS_MODULE,
+-	.remove		= __exit_p(spi_gpio_remove),
++	.probe		= spi_gpio_probe,
++	.remove		= __devexit_p(spi_gpio_remove),
+ };
+ 
+ static int __init spi_gpio_init(void)
+ {
+-	return platform_driver_probe(&spi_gpio_driver, spi_gpio_probe);
++	return platform_driver_register(&spi_gpio_driver);
+ }
+ module_init(spi_gpio_init);
+ 
diff --git a/target/linux/generic/patches-2.6.32/920-04-spi-gpio-implement-spi-delay.patch b/target/linux/generic/patches-2.6.32/920-04-spi-gpio-implement-spi-delay.patch
new file mode 100644
index 0000000000..19032881b8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/920-04-spi-gpio-implement-spi-delay.patch
@@ -0,0 +1,58 @@
+Implement the SPI-GPIO delay function for busses that need speed limitation.
+
+--mb
+
+
+
+--- a/drivers/spi/spi_gpio.c
++++ b/drivers/spi/spi_gpio.c
+@@ -21,6 +21,7 @@
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
+ #include <linux/gpio.h>
++#include <linux/delay.h>
+ 
+ #include <linux/spi/spi.h>
+ #include <linux/spi/spi_bitbang.h>
+@@ -69,6 +70,7 @@ struct spi_gpio {
+  *		#define	SPI_MOSI_GPIO	120
+  *		#define	SPI_SCK_GPIO	121
+  *		#define	SPI_N_CHIPSEL	4
++ *		#undef NEED_SPIDELAY
+  *		#include "spi_gpio.c"
+  */
+ 
+@@ -76,6 +78,7 @@ struct spi_gpio {
+ #define DRIVER_NAME	"spi_gpio"
+ 
+ #define GENERIC_BITBANG	/* vs tight inlines */
++#define NEED_SPIDELAY	1
+ 
+ /* all functions referencing these symbols must define pdata */
+ #define SPI_MISO_GPIO	((pdata)->miso)
+@@ -120,12 +123,20 @@ static inline int getmiso(const struct s
+ #undef pdata
+ 
+ /*
+- * NOTE:  this clocks "as fast as we can".  It "should" be a function of the
+- * requested device clock.  Software overhead means we usually have trouble
+- * reaching even one Mbit/sec (except when we can inline bitops), so for now
+- * we'll just assume we never need additional per-bit slowdowns.
++ * NOTE:  to clock "as fast as we can", set spi_device.max_speed_hz
++ * and spi_transfer.speed_hz to 0.
++ * Otherwise this is a function of the requested device clock.
++ * Software overhead means we usually have trouble
++ * reaching even one Mbit/sec (except when we can inline bitops). So on small
++ * embedded devices with fast SPI slaves you usually don't need a delay.
+  */
+-#define spidelay(nsecs)	do {} while (0)
++static inline void spidelay(unsigned nsecs)
++{
++#ifdef NEED_SPIDELAY
++	if (unlikely(nsecs))
++		ndelay(nsecs);
++#endif /* NEED_SPIDELAY */
++}
+ 
+ #define	EXPAND_BITBANG_TXRX
+ #include <linux/spi/spi_bitbang.h>
diff --git a/target/linux/generic/patches-2.6.32/921-gpio_spi_driver.patch b/target/linux/generic/patches-2.6.32/921-gpio_spi_driver.patch
new file mode 100644
index 0000000000..73563f2337
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/921-gpio_spi_driver.patch
@@ -0,0 +1,366 @@
+THIS CODE IS DEPRECATED.
+
+Please use the new mainline SPI-GPIO driver, as of 2.6.29.
+
+--mb
+
+
+
+--- /dev/null
++++ b/include/linux/spi/spi_gpio_old.h
+@@ -0,0 +1,73 @@
++/*
++ * spi_gpio interface to platform code
++ *
++ * Copyright (c) 2008 Piotr Skamruk
++ * Copyright (c) 2008 Michael Buesch
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef _LINUX_SPI_SPI_GPIO
++#define _LINUX_SPI_SPI_GPIO
++
++#include <linux/types.h>
++#include <linux/spi/spi.h>
++
++
++/**
++ * struct spi_gpio_platform_data - Data definitions for a SPI-GPIO device.
++ *
++ * This structure holds information about a GPIO-based SPI device.
++ *
++ * @pin_clk: The GPIO pin number of the CLOCK pin.
++ *
++ * @pin_miso: The GPIO pin number of the MISO pin.
++ *
++ * @pin_mosi: The GPIO pin number of the MOSI pin.
++ *
++ * @pin_cs: The GPIO pin number of the CHIPSELECT pin.
++ *
++ * @cs_activelow: If true, the chip is selected when the CS line is low.
++ *
++ * @no_spi_delay: If true, no delay is done in the lowlevel bitbanging.
++ *                Note that doing no delay is not standards compliant,
++ *                but it might be needed to speed up transfers on some
++ *                slow embedded machines.
++ *
++ * @boardinfo_setup: This callback is called after the
++ *                   SPI master device was registered, but before the
++ *                   device is registered.
++ * @boardinfo_setup_data: Data argument passed to boardinfo_setup().
++ */
++struct spi_gpio_platform_data {
++	unsigned int pin_clk;
++	unsigned int pin_miso;
++	unsigned int pin_mosi;
++	unsigned int pin_cs;
++	bool cs_activelow;
++	bool no_spi_delay;
++	int (*boardinfo_setup)(struct spi_board_info *bi,
++			       struct spi_master *master,
++			       void *data);
++	void *boardinfo_setup_data;
++};
++
++/**
++ * SPI_GPIO_PLATDEV_NAME - The platform device name string.
++ *
++ * The name string that has to be used for platform_device_alloc
++ * when allocating a spi-gpio device.
++ */
++#define SPI_GPIO_PLATDEV_NAME	"spi-gpio"
++
++/**
++ * spi_gpio_next_id - Get another platform device ID number.
++ *
++ * This returns the next platform device ID number that has to be used
++ * for platform_device_alloc. The ID is opaque and should not be used for
++ * anything else.
++ */
++int spi_gpio_next_id(void);
++
++#endif /* _LINUX_SPI_SPI_GPIO */
+--- /dev/null
++++ b/drivers/spi/spi_gpio_old.c
+@@ -0,0 +1,251 @@
++/*
++ * Bitbanging SPI bus driver using GPIO API
++ *
++ * Copyright (c) 2008 Piotr Skamruk
++ * Copyright (c) 2008 Michael Buesch
++ *
++ * based on spi_s3c2410_gpio.c
++ *   Copyright (c) 2006 Ben Dooks
++ *   Copyright (c) 2006 Simtec Electronics
++ * and on i2c-gpio.c
++ *   Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/spinlock.h>
++#include <linux/workqueue.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_bitbang.h>
++#include <linux/spi/spi_gpio_old.h>
++#include <linux/gpio.h>
++#include <asm/atomic.h>
++
++
++struct spi_gpio {
++	struct spi_bitbang bitbang;
++	struct spi_gpio_platform_data *info;
++	struct platform_device *pdev;
++	struct spi_board_info bi;
++};
++
++
++static inline struct spi_gpio *spidev_to_sg(struct spi_device *dev)
++{
++	return dev->controller_data;
++}
++
++static inline void setsck(struct spi_device *dev, int val)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++	gpio_set_value(sp->info->pin_clk, val ? 1 : 0);
++}
++
++static inline void setmosi(struct spi_device *dev, int val)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++	gpio_set_value(sp->info->pin_mosi, val ? 1 : 0);
++}
++
++static inline u32 getmiso(struct spi_device *dev)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++	return gpio_get_value(sp->info->pin_miso) ? 1 : 0;
++}
++
++static inline void do_spidelay(struct spi_device *dev, unsigned nsecs)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++
++	if (!sp->info->no_spi_delay)
++		ndelay(nsecs);
++}
++
++#define spidelay(nsecs) do {					\
++	/* Steal the spi_device pointer from our caller.	\
++	 * The bitbang-API should probably get fixed here... */	\
++	do_spidelay(spi, nsecs);				\
++  } while (0)
++
++#define EXPAND_BITBANG_TXRX
++#include <linux/spi/spi_bitbang.h>
++
++static u32 spi_gpio_txrx_mode0(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
++}
++
++static u32 spi_gpio_txrx_mode1(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
++}
++
++static u32 spi_gpio_txrx_mode2(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
++}
++
++static u32 spi_gpio_txrx_mode3(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
++}
++
++static void spi_gpio_chipselect(struct spi_device *dev, int on)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++
++	if (sp->info->cs_activelow)
++		on = !on;
++	gpio_set_value(sp->info->pin_cs, on ? 1 : 0);
++}
++
++static int spi_gpio_probe(struct platform_device *pdev)
++{
++	struct spi_master *master;
++	struct spi_gpio_platform_data *pdata;
++	struct spi_gpio *sp;
++	struct spi_device *spidev;
++	int err;
++
++	pdata = pdev->dev.platform_data;
++	if (!pdata)
++		return -ENXIO;
++
++	err = -ENOMEM;
++	master = spi_alloc_master(&pdev->dev, sizeof(struct spi_gpio));
++	if (!master)
++		goto err_alloc_master;
++
++	sp = spi_master_get_devdata(master);
++	platform_set_drvdata(pdev, sp);
++	sp->info = pdata;
++
++	err = gpio_request(pdata->pin_clk, "spi_clock");
++	if (err)
++		goto err_request_clk;
++	err = gpio_request(pdata->pin_mosi, "spi_mosi");
++	if (err)
++		goto err_request_mosi;
++	err = gpio_request(pdata->pin_miso, "spi_miso");
++	if (err)
++		goto err_request_miso;
++	err = gpio_request(pdata->pin_cs, "spi_cs");
++	if (err)
++		goto err_request_cs;
++
++	sp->bitbang.master = spi_master_get(master);
++	sp->bitbang.master->bus_num = -1;
++	sp->bitbang.master->num_chipselect = 1;
++	sp->bitbang.chipselect = spi_gpio_chipselect;
++	sp->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_mode0;
++	sp->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_mode1;
++	sp->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_mode2;
++	sp->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_mode3;
++
++	gpio_direction_output(pdata->pin_clk, 0);
++	gpio_direction_output(pdata->pin_mosi, 0);
++	gpio_direction_output(pdata->pin_cs,
++			      pdata->cs_activelow ? 1 : 0);
++	gpio_direction_input(pdata->pin_miso);
++
++	err = spi_bitbang_start(&sp->bitbang);
++	if (err)
++		goto err_no_bitbang;
++	err = pdata->boardinfo_setup(&sp->bi, master,
++				     pdata->boardinfo_setup_data);
++	if (err)
++		goto err_bi_setup;
++	sp->bi.controller_data = sp;
++	spidev = spi_new_device(master, &sp->bi);
++	if (!spidev)
++		goto err_new_dev;
++
++	return 0;
++
++err_new_dev:
++err_bi_setup:
++	spi_bitbang_stop(&sp->bitbang);
++err_no_bitbang:
++	spi_master_put(sp->bitbang.master);
++	gpio_free(pdata->pin_cs);
++err_request_cs:
++	gpio_free(pdata->pin_miso);
++err_request_miso:
++	gpio_free(pdata->pin_mosi);
++err_request_mosi:
++	gpio_free(pdata->pin_clk);
++err_request_clk:
++	kfree(master);
++
++err_alloc_master:
++	return err;
++}
++
++static int __devexit spi_gpio_remove(struct platform_device *pdev)
++{
++	struct spi_gpio *sp;
++	struct spi_gpio_platform_data *pdata;
++
++	pdata = pdev->dev.platform_data;
++	sp = platform_get_drvdata(pdev);
++
++	gpio_free(pdata->pin_clk);
++	gpio_free(pdata->pin_mosi);
++	gpio_free(pdata->pin_miso);
++	gpio_free(pdata->pin_cs);
++	spi_bitbang_stop(&sp->bitbang);
++	spi_master_put(sp->bitbang.master);
++
++	return 0;
++}
++
++static struct platform_driver spi_gpio_driver = {
++	.driver		= {
++		.name	= SPI_GPIO_PLATDEV_NAME,
++		.owner	= THIS_MODULE,
++	},
++	.probe		= spi_gpio_probe,
++	.remove		= __devexit_p(spi_gpio_remove),
++};
++
++int spi_gpio_next_id(void)
++{
++	static atomic_t counter = ATOMIC_INIT(-1);
++
++	return atomic_inc_return(&counter);
++}
++EXPORT_SYMBOL(spi_gpio_next_id);
++
++static int __init spi_gpio_init(void)
++{
++	int err;
++
++	err = platform_driver_register(&spi_gpio_driver);
++	if (err)
++		printk(KERN_ERR "spi-gpio: register failed: %d\n", err);
++
++	return err;
++}
++module_init(spi_gpio_init);
++
++static void __exit spi_gpio_exit(void)
++{
++	platform_driver_unregister(&spi_gpio_driver);
++}
++module_exit(spi_gpio_exit);
++
++MODULE_AUTHOR("Piot Skamruk <piotr.skamruk at gmail.com>");
++MODULE_AUTHOR("Michael Buesch");
++MODULE_DESCRIPTION("Platform independent GPIO bitbanging SPI driver");
++MODULE_LICENSE("GPL v2");
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -116,6 +116,15 @@ config SPI_GPIO
+ 	  GPIO operations, you should be able to leverage that for better
+ 	  speed with a custom version of this driver; see the source code.
+ 
++config SPI_GPIO_OLD
++	tristate "Old GPIO API based bitbanging SPI controller (DEPRECATED)"
++	depends on SPI_MASTER && GENERIC_GPIO
++	select SPI_BITBANG
++	help
++	  This code is deprecated. Please use the new mainline SPI-GPIO driver.
++
++	  If unsure, say N.
++
+ config SPI_IMX
+ 	tristate "Freescale i.MX SPI controllers"
+ 	depends on ARCH_MXC
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -17,6 +17,7 @@ obj-$(CONFIG_SPI_BITBANG)		+= spi_bitban
+ obj-$(CONFIG_SPI_AU1550)		+= au1550_spi.o
+ obj-$(CONFIG_SPI_BUTTERFLY)		+= spi_butterfly.o
+ obj-$(CONFIG_SPI_GPIO)			+= spi_gpio.o
++obj-$(CONFIG_SPI_GPIO_OLD)		+= spi_gpio_old.o
+ obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
+ obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
+ obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
diff --git a/target/linux/generic/patches-2.6.32/922-gpiommc.patch b/target/linux/generic/patches-2.6.32/922-gpiommc.patch
new file mode 100644
index 0000000000..8c995874a8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/922-gpiommc.patch
@@ -0,0 +1,843 @@
+--- /dev/null
++++ b/drivers/mmc/host/gpiommc.c
+@@ -0,0 +1,608 @@
++/*
++ * Driver an MMC/SD card on a bitbanging GPIO SPI bus.
++ * This module hooks up the mmc_spi and spi_gpio modules and also
++ * provides a configfs interface.
++ *
++ * Copyright 2008 Michael Buesch <mb@bu3sch.de>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include <linux/mmc/gpiommc.h>
++#include <linux/platform_device.h>
++#include <linux/list.h>
++#include <linux/mutex.h>
++#include <linux/spi/spi_gpio_old.h>
++#include <linux/configfs.h>
++#include <linux/gpio.h>
++#include <asm/atomic.h>
++
++
++#define PFX				"gpio-mmc: "
++
++
++struct gpiommc_device {
++	struct platform_device *pdev;
++	struct platform_device *spi_pdev;
++	struct spi_board_info boardinfo;
++};
++
++
++MODULE_DESCRIPTION("GPIO based MMC driver");
++MODULE_AUTHOR("Michael Buesch");
++MODULE_LICENSE("GPL");
++
++
++static int gpiommc_boardinfo_setup(struct spi_board_info *bi,
++				   struct spi_master *master,
++				   void *data)
++{
++	struct gpiommc_device *d = data;
++	struct gpiommc_platform_data *pdata = d->pdev->dev.platform_data;
++
++	/* Bind the SPI master to the MMC-SPI host driver. */
++	strlcpy(bi->modalias, "mmc_spi", sizeof(bi->modalias));
++
++	bi->max_speed_hz = pdata->max_bus_speed;
++	bi->bus_num = master->bus_num;
++	bi->mode = pdata->mode;
++
++	return 0;
++}
++
++static int gpiommc_probe(struct platform_device *pdev)
++{
++	struct gpiommc_platform_data *mmc_pdata = pdev->dev.platform_data;
++	struct spi_gpio_platform_data spi_pdata;
++	struct gpiommc_device *d;
++	int err;
++
++	err = -ENXIO;
++	if (!mmc_pdata)
++		goto error;
++
++#ifdef CONFIG_MMC_SPI_MODULE
++	err = request_module("mmc_spi");
++	if (err) {
++		printk(KERN_WARNING PFX
++		       "Failed to request mmc_spi module.\n");
++	}
++#endif /* CONFIG_MMC_SPI_MODULE */
++
++	/* Allocate the GPIO-MMC device */
++	err = -ENOMEM;
++	d = kzalloc(sizeof(*d), GFP_KERNEL);
++	if (!d)
++		goto error;
++	d->pdev = pdev;
++
++	/* Create the SPI-GPIO device */
++	d->spi_pdev = platform_device_alloc(SPI_GPIO_PLATDEV_NAME,
++					    spi_gpio_next_id());
++	if (!d->spi_pdev)
++		goto err_free_d;
++
++	memset(&spi_pdata, 0, sizeof(spi_pdata));
++	spi_pdata.pin_clk = mmc_pdata->pins.gpio_clk;
++	spi_pdata.pin_miso = mmc_pdata->pins.gpio_do;
++	spi_pdata.pin_mosi = mmc_pdata->pins.gpio_di;
++	spi_pdata.pin_cs = mmc_pdata->pins.gpio_cs;
++	spi_pdata.cs_activelow = mmc_pdata->pins.cs_activelow;
++	spi_pdata.no_spi_delay = mmc_pdata->no_spi_delay;
++	spi_pdata.boardinfo_setup = gpiommc_boardinfo_setup;
++	spi_pdata.boardinfo_setup_data = d;
++
++	err = platform_device_add_data(d->spi_pdev, &spi_pdata,
++				       sizeof(spi_pdata));
++	if (err)
++		goto err_free_pdev;
++	err = platform_device_add(d->spi_pdev);
++	if (err)
++		goto err_free_pdata;
++	platform_set_drvdata(pdev, d);
++
++	printk(KERN_INFO PFX "MMC-Card \"%s\" "
++	       "attached to GPIO pins di=%u, do=%u, clk=%u, cs=%u\n",
++	       mmc_pdata->name, mmc_pdata->pins.gpio_di,
++	       mmc_pdata->pins.gpio_do,
++	       mmc_pdata->pins.gpio_clk,
++	       mmc_pdata->pins.gpio_cs);
++
++	return 0;
++
++err_free_pdata:
++	kfree(d->spi_pdev->dev.platform_data);
++	d->spi_pdev->dev.platform_data = NULL;
++err_free_pdev:
++	platform_device_put(d->spi_pdev);
++err_free_d:
++	kfree(d);
++error:
++	return err;
++}
++
++static int gpiommc_remove(struct platform_device *pdev)
++{
++	struct gpiommc_device *d = platform_get_drvdata(pdev);
++	struct gpiommc_platform_data *pdata = d->pdev->dev.platform_data;
++
++	platform_device_unregister(d->spi_pdev);
++	printk(KERN_INFO PFX "GPIO based MMC-Card \"%s\" removed\n",
++	       pdata->name);
++	platform_device_put(d->spi_pdev);
++
++	return 0;
++}
++
++#ifdef CONFIG_GPIOMMC_CONFIGFS
++
++/* A device that was created through configfs */
++struct gpiommc_configfs_device {
++	struct config_item item;
++	/* The platform device, after registration. */
++	struct platform_device *pdev;
++	/* The configuration */
++	struct gpiommc_platform_data pdata;
++};
++
++#define GPIO_INVALID	-1
++
++static inline bool gpiommc_is_registered(struct gpiommc_configfs_device *dev)
++{
++	return (dev->pdev != NULL);
++}
++
++static inline struct gpiommc_configfs_device *ci_to_gpiommc(struct config_item *item)
++{
++	return item ? container_of(item, struct gpiommc_configfs_device, item) : NULL;
++}
++
++static struct configfs_attribute gpiommc_attr_DI = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_data_in",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_DO = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_data_out",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_CLK = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_clock",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_CS = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_chipselect",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_CS_activelow = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_chipselect_activelow",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_spimode = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "spi_mode",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_spidelay = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "spi_delay",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_max_bus_speed = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "max_bus_speed",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_register = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "register",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute *gpiommc_config_attrs[] = {
++	&gpiommc_attr_DI,
++	&gpiommc_attr_DO,
++	&gpiommc_attr_CLK,
++	&gpiommc_attr_CS,
++	&gpiommc_attr_CS_activelow,
++	&gpiommc_attr_spimode,
++	&gpiommc_attr_spidelay,
++	&gpiommc_attr_max_bus_speed,
++	&gpiommc_attr_register,
++	NULL,
++};
++
++static ssize_t gpiommc_config_attr_show(struct config_item *item,
++					struct configfs_attribute *attr,
++					char *page)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++	ssize_t count = 0;
++	unsigned int gpio;
++	int err = 0;
++
++	if (attr == &gpiommc_attr_DI) {
++		gpio = dev->pdata.pins.gpio_di;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_DO) {
++		gpio = dev->pdata.pins.gpio_do;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CLK) {
++		gpio = dev->pdata.pins.gpio_clk;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS) {
++		gpio = dev->pdata.pins.gpio_cs;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS_activelow) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 dev->pdata.pins.cs_activelow);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spimode) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 dev->pdata.mode);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spidelay) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 !dev->pdata.no_spi_delay);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_max_bus_speed) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 dev->pdata.max_bus_speed);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_register) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 gpiommc_is_registered(dev));
++		goto out;
++	}
++	WARN_ON(1);
++	err = -ENOSYS;
++out:
++	return err ? err : count;
++}
++
++static int gpiommc_do_register(struct gpiommc_configfs_device *dev,
++			       const char *name)
++{
++	int err;
++
++	if (gpiommc_is_registered(dev))
++		return 0;
++
++	if (!gpio_is_valid(dev->pdata.pins.gpio_di) ||
++	    !gpio_is_valid(dev->pdata.pins.gpio_do) ||
++	    !gpio_is_valid(dev->pdata.pins.gpio_clk) ||
++	    !gpio_is_valid(dev->pdata.pins.gpio_cs)) {
++		printk(KERN_ERR PFX
++		       "configfs: Invalid GPIO pin number(s)\n");
++		return -EINVAL;
++	}
++
++	strlcpy(dev->pdata.name, name,
++		sizeof(dev->pdata.name));
++
++	dev->pdev = platform_device_alloc(GPIOMMC_PLATDEV_NAME,
++					  gpiommc_next_id());
++	if (!dev->pdev)
++		return -ENOMEM;
++	err = platform_device_add_data(dev->pdev, &dev->pdata,
++				       sizeof(dev->pdata));
++	if (err) {
++		platform_device_put(dev->pdev);
++		return err;
++	}
++	err = platform_device_add(dev->pdev);
++	if (err) {
++		platform_device_put(dev->pdev);
++		return err;
++	}
++
++	return 0;
++}
++
++static void gpiommc_do_unregister(struct gpiommc_configfs_device *dev)
++{
++	if (!gpiommc_is_registered(dev))
++		return;
++
++	platform_device_unregister(dev->pdev);
++	dev->pdev = NULL;
++}
++
++static ssize_t gpiommc_config_attr_store(struct config_item *item,
++					 struct configfs_attribute *attr,
++					 const char *page, size_t count)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++	int err = -EINVAL;
++	unsigned long data;
++
++	if (attr == &gpiommc_attr_register) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data == 1)
++			err = gpiommc_do_register(dev, item->ci_name);
++		if (data == 0) {
++			gpiommc_do_unregister(dev);
++			err = 0;
++		}
++		goto out;
++	}
++
++	if (gpiommc_is_registered(dev)) {
++		/* The rest of the config parameters can only be set
++		 * as long as the device is not registered, yet. */
++		err = -EBUSY;
++		goto out;
++	}
++
++	if (attr == &gpiommc_attr_DI) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_di = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_DO) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_do = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CLK) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_clk = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_cs = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS_activelow) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data != 0 && data != 1)
++			goto out;
++		dev->pdata.pins.cs_activelow = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spimode) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		switch (data) {
++		case 0:
++			dev->pdata.mode = SPI_MODE_0;
++			break;
++		case 1:
++			dev->pdata.mode = SPI_MODE_1;
++			break;
++		case 2:
++			dev->pdata.mode = SPI_MODE_2;
++			break;
++		case 3:
++			dev->pdata.mode = SPI_MODE_3;
++			break;
++		default:
++			goto out;
++		}
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spidelay) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data != 0 && data != 1)
++			goto out;
++		dev->pdata.no_spi_delay = !data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_max_bus_speed) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data > UINT_MAX)
++			goto out;
++		dev->pdata.max_bus_speed = data;
++		err = 0;
++		goto out;
++	}
++	WARN_ON(1);
++	err = -ENOSYS;
++out:
++	return err ? err : count;
++}
++
++static void gpiommc_config_item_release(struct config_item *item)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++
++	kfree(dev);
++}
++
++static struct configfs_item_operations gpiommc_config_item_ops = {
++	.release		= gpiommc_config_item_release,
++	.show_attribute		= gpiommc_config_attr_show,
++	.store_attribute	= gpiommc_config_attr_store,
++};
++
++static struct config_item_type gpiommc_dev_ci_type = {
++	.ct_item_ops	= &gpiommc_config_item_ops,
++	.ct_attrs	= gpiommc_config_attrs,
++	.ct_owner	= THIS_MODULE,
++};
++
++static struct config_item *gpiommc_make_item(struct config_group *group,
++					     const char *name)
++{
++	struct gpiommc_configfs_device *dev;
++
++	if (strlen(name) > GPIOMMC_MAX_NAMELEN) {
++		printk(KERN_ERR PFX "configfs: device name too long\n");
++		return NULL;
++	}
++
++	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
++	if (!dev)
++		return NULL;
++
++	config_item_init_type_name(&dev->item, name,
++				   &gpiommc_dev_ci_type);
++
++	/* Assign default configuration */
++	dev->pdata.pins.gpio_di = GPIO_INVALID;
++	dev->pdata.pins.gpio_do = GPIO_INVALID;
++	dev->pdata.pins.gpio_clk = GPIO_INVALID;
++	dev->pdata.pins.gpio_cs = GPIO_INVALID;
++	dev->pdata.pins.cs_activelow = 1;
++	dev->pdata.mode = SPI_MODE_0;
++	dev->pdata.no_spi_delay = 0;
++	dev->pdata.max_bus_speed = 5000000; /* 5 MHz */
++
++	return &(dev->item);
++}
++
++static void gpiommc_drop_item(struct config_group *group,
++			      struct config_item *item)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++
++	gpiommc_do_unregister(dev);
++	kfree(dev);
++}
++
++static struct configfs_group_operations gpiommc_ct_group_ops = {
++	.make_item	= gpiommc_make_item,
++	.drop_item	= gpiommc_drop_item,
++};
++
++static struct config_item_type gpiommc_ci_type = {
++	.ct_group_ops	= &gpiommc_ct_group_ops,
++	.ct_owner	= THIS_MODULE,
++};
++
++static struct configfs_subsystem gpiommc_subsys = {
++	.su_group = {
++		.cg_item = {
++			.ci_namebuf = GPIOMMC_PLATDEV_NAME,
++			.ci_type = &gpiommc_ci_type,
++		},
++	},
++	.su_mutex = __MUTEX_INITIALIZER(gpiommc_subsys.su_mutex),
++};
++
++#endif /* CONFIG_GPIOMMC_CONFIGFS */
++
++static struct platform_driver gpiommc_plat_driver = {
++	.probe	= gpiommc_probe,
++	.remove	= gpiommc_remove,
++	.driver	= {
++		.name	= GPIOMMC_PLATDEV_NAME,
++		.owner	= THIS_MODULE,
++	},
++};
++
++int gpiommc_next_id(void)
++{
++	static atomic_t counter = ATOMIC_INIT(-1);
++
++	return atomic_inc_return(&counter);
++}
++EXPORT_SYMBOL(gpiommc_next_id);
++
++static int __init gpiommc_modinit(void)
++{
++	int err;
++
++	err = platform_driver_register(&gpiommc_plat_driver);
++	if (err)
++		return err;
++
++#ifdef CONFIG_GPIOMMC_CONFIGFS
++	config_group_init(&gpiommc_subsys.su_group);
++	err = configfs_register_subsystem(&gpiommc_subsys);
++	if (err) {
++		platform_driver_unregister(&gpiommc_plat_driver);
++		return err;
++	}
++#endif /* CONFIG_GPIOMMC_CONFIGFS */
++
++	return 0;
++}
++module_init(gpiommc_modinit);
++
++static void __exit gpiommc_modexit(void)
++{
++#ifdef CONFIG_GPIOMMC_CONFIGFS
++	configfs_unregister_subsystem(&gpiommc_subsys);
++#endif
++	platform_driver_unregister(&gpiommc_plat_driver);
++}
++module_exit(gpiommc_modexit);
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -334,6 +334,31 @@ config MMC_TMIO
+ 	  This provides support for the SD/MMC cell found in TC6393XB,
+ 	  T7L66XB and also HTC ASIC3
+ 
++config GPIOMMC
++	tristate "MMC/SD over GPIO-based SPI"
++	depends on MMC && MMC_SPI && SPI_GPIO_OLD
++	help
++	  This driver hooks up the mmc_spi and spi_gpio modules so that
++	  MMC/SD cards can be used on a GPIO based bus by bitbanging
++	  the SPI protocol in software.
++
++	  This driver provides a configfs interface to dynamically create
++	  and destroy GPIO-based MMC/SD card devices. It also provides
++	  a platform device interface API.
++	  See Documentation/gpiommc.txt for details.
++
++	  The module will be called gpiommc.
++
++	  If unsure, say N.
++
++config GPIOMMC_CONFIGFS
++	bool
++	depends on GPIOMMC && CONFIGFS_FS
++	default y
++	help
++	  This option automatically enables configfs support for gpiommc
++	  if configfs is available.
++
+ config MMC_CB710
+ 	tristate "ENE CB710 MMC/SD Interface support"
+ 	depends on PCI
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -34,6 +34,7 @@ obj-$(CONFIG_MMC_SDRICOH_CS)	+= sdricoh_
+ obj-$(CONFIG_MMC_TMIO)		+= tmio_mmc.o
+ obj-$(CONFIG_MMC_CB710)	+= cb710-mmc.o
+ obj-$(CONFIG_MMC_VIA_SDMMC)	+= via-sdmmc.o
++obj-$(CONFIG_GPIOMMC)		+= gpiommc.o
+ 
+ ifeq ($(CONFIG_CB710_DEBUG),y)
+ 	CFLAGS-cb710-mmc	+= -DDEBUG
+--- /dev/null
++++ b/include/linux/mmc/gpiommc.h
+@@ -0,0 +1,71 @@
++/*
++ * Device driver for MMC/SD cards driven over a GPIO bus.
++ *
++ * Copyright (c) 2008 Michael Buesch
++ *
++ * Licensed under the GNU/GPL version 2.
++ */
++#ifndef LINUX_GPIOMMC_H_
++#define LINUX_GPIOMMC_H_
++
++#include <linux/types.h>
++
++
++#define GPIOMMC_MAX_NAMELEN		15
++#define GPIOMMC_MAX_NAMELEN_STR		__stringify(GPIOMMC_MAX_NAMELEN)
++
++/**
++ * struct gpiommc_pins - Hardware pin assignments
++ *
++ * @gpio_di: The GPIO number of the DATA IN pin
++ * @gpio_do: The GPIO number of the DATA OUT pin
++ * @gpio_clk: The GPIO number of the CLOCK pin
++ * @gpio_cs: The GPIO number of the CHIPSELECT pin
++ * @cs_activelow: If true, the chip is considered selected if @gpio_cs is low.
++ */
++struct gpiommc_pins {
++	unsigned int gpio_di;
++	unsigned int gpio_do;
++	unsigned int gpio_clk;
++	unsigned int gpio_cs;
++	bool cs_activelow;
++};
++
++/**
++ * struct gpiommc_platform_data - Platform data for a MMC-over-SPI-GPIO device.
++ *
++ * @name: The unique name string of the device.
++ * @pins: The hardware pin assignments.
++ * @mode: The hardware mode. This is either SPI_MODE_0,
++ *        SPI_MODE_1, SPI_MODE_2 or SPI_MODE_3. See the SPI documentation.
++ * @no_spi_delay: Do not use delays in the lowlevel SPI bitbanging code.
++ *                This is not standards compliant, but may be required for some
++ *                embedded machines to gain reasonable speed.
++ * @max_bus_speed: The maximum speed of the SPI bus, in Hertz.
++ */
++struct gpiommc_platform_data {
++	char name[GPIOMMC_MAX_NAMELEN + 1];
++	struct gpiommc_pins pins;
++	u8 mode;
++	bool no_spi_delay;
++	unsigned int max_bus_speed;
++};
++
++/**
++ * GPIOMMC_PLATDEV_NAME - The platform device name string.
++ *
++ * The name string that has to be used for platform_device_alloc
++ * when allocating a gpiommc device.
++ */
++#define GPIOMMC_PLATDEV_NAME	"gpiommc"
++
++/**
++ * gpiommc_next_id - Get another platform device ID number.
++ *
++ * This returns the next platform device ID number that has to be used
++ * for platform_device_alloc. The ID is opaque and should not be used for
++ * anything else.
++ */
++int gpiommc_next_id(void);
++
++#endif /* LINUX_GPIOMMC_H_ */
+--- /dev/null
++++ b/Documentation/gpiommc.txt
+@@ -0,0 +1,97 @@
++GPIOMMC - Driver for an MMC/SD card on a bitbanging GPIO SPI bus
++================================================================
++
++The gpiommc module hooks up the mmc_spi and spi_gpio modules for running an
++MMC or SD card on GPIO pins.
++
++Two interfaces for registering a new MMC/SD card device are provided:
++A static platform-device based mechanism and a dynamic configfs based interface.
++
++
++Registering devices via platform-device
++=======================================
++
++The platform-device interface is used for registering MMC/SD devices that are
++part of the hardware platform. This is most useful only for embedded machines
++with MMC/SD devices statically connected to the platform GPIO bus.
++
++The data structures are declared in <linux/mmc/gpiommc.h>.
++
++To register a new device, define an instance of struct gpiommc_platform_data.
++This structure holds any information about how the device is hooked up to the
++GPIO pins and what hardware modes the device supports. See the docbook-style
++documentation in the header file for more information on the struct fields.
++
++Then allocate a new instance of a platform device by doing:
++
++	pdev = platform_device_alloc(GPIOMMC_PLATDEV_NAME, gpiommc_next_id());
++
++This will allocate the platform device data structures and hook it up to the
++gpiommc driver.
++Then add the gpiommc_platform_data to the platform device.
++
++	err = platform_device_add_data(pdev, pdata, sizeof(struct gpiommc_platform_data));
++
++You may free the local instance of struct gpiommc_platform_data now. (So the
++struct may be allocated on the stack, too).
++Now simply register the platform device.
++
++	err = platform_device_add(pdev);
++
++Done. The gpiommc probe routine will be invoked now and you should see a kernel
++log message for the added device.
++
++
++Registering devices via configfs
++================================
++
++MMC/SD cards connected via GPIO often are a pretty dynamic thing, as for example
++selfmade hacks for soldering an MMC/SD card to standard GPIO pins on embedded
++hardware are a common situation.
++So we provide a dynamic interface to conveniently handle adding and removing
++devices from userspace, without the need to recompile the kernel.
++
++The "gpiommc" subdirectory at the configfs mountpoint is used for handling
++the dynamic configuration.
++
++To create a new device, it must first be allocated with mkdir.
++The following command will allocate a device named "my_mmc":
++	mkdir /config/gpiommc/my_mmc
++
++There are several configuration files available in the new
++/config/gpiommc/my_mmc/ directory:
++
++gpio_data_in			= The SPI data-IN GPIO pin number.
++gpio_data_out			= The SPI data-OUT GPIO pin number.
++gpio_clock			= The SPI Clock GPIO pin number.
++gpio_chipselect			= The SPI Chipselect GPIO pin number.
++gpio_chipselect_activelow	= Boolean. If 0, Chipselect is active-HIGH.
++				  If 1, Chipselect is active-LOW.
++spi_mode			= The SPI data mode. Can be 0-3.
++spi_delay			= Enable all delays in the lowlevel bitbanging.
++max_bus_speed			= The maximum SPI bus speed. In Hertz.
++
++register			= Not a configuration parameter.
++				  Used to register the configured card
++				  with the kernel.
++
++The device must first get configured and then registered by writing "1" to
++the "register" file.
++The configuration parameters "gpio_data_in", "gpio_data_out", "gpio_clock"
++and "gpio_chipselect" are essential and _must_ be configured before writing
++"1" to the "register" file. The registration will fail, otherwise.
++
++The default values for the other parameters are:
++gpio_chipselect_activelow	= 1		(CS active-LOW)
++spi_mode			= 0		(SPI_MODE_0)
++spi_delay			= 1		(enabled)
++max_bus_speed			= 5000000	(5 Mhz)
++
++Configuration values can not be changed after registration. To unregister
++the device, write a "0" to the "register" file. The configuration can be
++changed again after unregistering.
++
++To completely remove the device, simply rmdir the directory
++(/config/gpiommc/my_mmc in this example).
++There's no need to first unregister the device before removing it. That will
++be done automatically.
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -2377,6 +2377,11 @@ T:	git git://git.kernel.org/pub/scm/linu
+ S:	Maintained
+ F:	drivers/media/video/gspca/
+ 
++GPIOMMC DRIVER
++P:	Michael Buesch
++M:	mb@bu3sch.de
++S:	Maintained
++
+ HARDWARE MONITORING
+ L:	lm-sensors@lm-sensors.org
+ W:	http://www.lm-sensors.org/
diff --git a/target/linux/generic/patches-2.6.32/923-gpiommc-configfs-locking.patch b/target/linux/generic/patches-2.6.32/923-gpiommc-configfs-locking.patch
new file mode 100644
index 0000000000..2e4e820b2b
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/923-gpiommc-configfs-locking.patch
@@ -0,0 +1,58 @@
+The gpiommc configfs context structure needs locking, as configfs
+does not lock access between files.
+
+--- a/drivers/mmc/host/gpiommc.c
++++ b/drivers/mmc/host/gpiommc.c
+@@ -143,6 +143,8 @@ struct gpiommc_configfs_device {
+ 	struct platform_device *pdev;
+ 	/* The configuration */
+ 	struct gpiommc_platform_data pdata;
++	/* Mutex to protect this structure */
++	struct mutex mutex;
+ };
+ 
+ #define GPIO_INVALID	-1
+@@ -233,6 +235,8 @@ static ssize_t gpiommc_config_attr_show(
+ 	unsigned int gpio;
+ 	int err = 0;
+ 
++	mutex_lock(&dev->mutex);
++
+ 	if (attr == &gpiommc_attr_DI) {
+ 		gpio = dev->pdata.pins.gpio_di;
+ 		if (gpio == GPIO_INVALID)
+@@ -293,6 +297,8 @@ static ssize_t gpiommc_config_attr_show(
+ 	WARN_ON(1);
+ 	err = -ENOSYS;
+ out:
++	mutex_unlock(&dev->mutex);
++
+ 	return err ? err : count;
+ }
+ 
+@@ -352,6 +358,8 @@ static ssize_t gpiommc_config_attr_store
+ 	int err = -EINVAL;
+ 	unsigned long data;
+ 
++	mutex_lock(&dev->mutex);
++
+ 	if (attr == &gpiommc_attr_register) {
+ 		err = strict_strtoul(page, 10, &data);
+ 		if (err)
+@@ -477,6 +485,8 @@ static ssize_t gpiommc_config_attr_store
+ 	WARN_ON(1);
+ 	err = -ENOSYS;
+ out:
++	mutex_unlock(&dev->mutex);
++
+ 	return err ? err : count;
+ }
+ 
+@@ -513,6 +523,7 @@ static struct config_item *gpiommc_make_
+ 	if (!dev)
+ 		return NULL;
+ 
++	mutex_init(&dev->mutex);
+ 	config_item_init_type_name(&dev->item, name,
+ 				   &gpiommc_dev_ci_type);
+ 
diff --git a/target/linux/generic/patches-2.6.32/924-cs5535_gpio.patch b/target/linux/generic/patches-2.6.32/924-cs5535_gpio.patch
new file mode 100644
index 0000000000..453affe583
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/924-cs5535_gpio.patch
@@ -0,0 +1,102 @@
+--- a/drivers/char/cs5535_gpio.c
++++ b/drivers/char/cs5535_gpio.c
+@@ -15,6 +15,7 @@
+ #include <linux/kernel.h>
+ #include <linux/init.h>
+ #include <linux/cdev.h>
++#include <linux/device.h>
+ #include <linux/ioport.h>
+ #include <linux/pci.h>
+ #include <linux/smp_lock.h>
+@@ -48,6 +49,7 @@ static struct pci_device_id divil_pci[] 
+ MODULE_DEVICE_TABLE(pci, divil_pci);
+ 
+ static struct cdev cs5535_gpio_cdev;
++static struct class *cs5535_gpio_class;
+ 
+ /* reserve 32 entries even though some aren't usable */
+ #define CS5535_GPIO_COUNT	32
+@@ -66,9 +68,14 @@ static struct gpio_regmap rm[] =
+ 	{ 0x30, 0x00, '1', '0' },	/* GPIOx_READ_BACK / GPIOx_OUT_VAL */
+ 	{ 0x20, 0x20, 'I', 'i' },	/* GPIOx_IN_EN */
+ 	{ 0x04, 0x04, 'O', 'o' },	/* GPIOx_OUT_EN */
++	{ 0x10, 0x10, 'A', 'a' },	/* GPIOx_OUT_AUX1_SEL */
++	{ 0x14, 0x14, 'B', 'b' },	/* GPIOx_OUT_AUX2_SEL */
+ 	{ 0x08, 0x08, 't', 'T' },	/* GPIOx_OUT_OD_EN */
+ 	{ 0x18, 0x18, 'P', 'p' },	/* GPIOx_OUT_PU_EN */
+ 	{ 0x1c, 0x1c, 'D', 'd' },	/* GPIOx_OUT_PD_EN */
++	{ 0x24, 0x24, 'N', 'n' },	/* GPIOx_IN_INV_EN */
++	{ 0x0c, 0x0c, 'X', 'x' },	/* GPIOx_OUT_INV_EN */
++	{ 0x00, 0x00, 'H', 'L' },	/* GPIOx_OUT_VAL */
+ };
+ 
+ 
+@@ -177,7 +184,7 @@ static int __init cs5535_gpio_init(void)
+ {
+ 	dev_t	dev_id;
+ 	u32	low, hi;
+-	int	retval;
++	int	retval, i;
+ 
+ 	if (pci_dev_present(divil_pci) == 0) {
+ 		printk(KERN_WARNING NAME ": DIVIL not found\n");
+@@ -232,23 +239,54 @@ static int __init cs5535_gpio_init(void)
+ 		major = MAJOR(dev_id);
+ 	}
+ 
+-	if (retval) {
+-		release_region(gpio_base, CS5535_GPIO_SIZE);
+-		return -1;
+-	}
++	if (retval)
++		goto error;
+ 
+ 	printk(KERN_DEBUG NAME ": base=%#x mask=%#lx major=%d\n",
+ 	       gpio_base, mask, major);
+ 
+ 	cdev_init(&cs5535_gpio_cdev, &cs5535_gpio_fops);
+-	cdev_add(&cs5535_gpio_cdev, dev_id, CS5535_GPIO_COUNT);
++	retval = cdev_add(&cs5535_gpio_cdev, dev_id, CS5535_GPIO_COUNT);
++	if (retval) {
++		kobject_put(&cs5535_gpio_cdev.kobj);
++		goto error_region;
++	}
++
++	cs5535_gpio_class = class_create(THIS_MODULE, "cs5535_gpio");
++	if (IS_ERR(cs5535_gpio_class)) {
++		printk(KERN_ERR "Error creating cs5535_gpio class\n");
++		cdev_del(&cs5535_gpio_cdev);
++		retval = PTR_ERR(cs5535_gpio_class);
++		goto error_region;
++	}
++
++	for (i = 0; i < CS5535_GPIO_COUNT; i++) {
++		if (mask & (1<<i)) {
++			device_create(cs5535_gpio_class, NULL, MKDEV(major, i), NULL, "cs5535_gpio%d", i);
++		}
++	}
+ 
+ 	return 0;
++
++error_region:
++	unregister_chrdev_region(dev_id, CS5535_GPIO_COUNT);
++error:
++	release_region(gpio_base, CS5535_GPIO_SIZE);
++	return retval;
+ }
+ 
+ static void __exit cs5535_gpio_cleanup(void)
+ {
+ 	dev_t dev_id = MKDEV(major, 0);
++	int i;
++
++	for (i = 0; i < CS5535_GPIO_COUNT; i++) {
++		if (mask & (1<<i)) {
++			device_destroy(cs5535_gpio_class, MKDEV(major, i));
++		}
++	}
++
++	class_destroy(cs5535_gpio_class);
+ 
+ 	cdev_del(&cs5535_gpio_cdev);
+ 	unregister_chrdev_region(dev_id, CS5535_GPIO_COUNT);
diff --git a/target/linux/generic/patches-2.6.32/925-modify-i2c-gpio-initcall-level.patch b/target/linux/generic/patches-2.6.32/925-modify-i2c-gpio-initcall-level.patch
new file mode 100644
index 0000000000..1708e33d01
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/925-modify-i2c-gpio-initcall-level.patch
@@ -0,0 +1,11 @@
+--- a/drivers/i2c/busses/i2c-gpio.c
++++ b/drivers/i2c/busses/i2c-gpio.c
+@@ -210,7 +210,7 @@ static int __init i2c_gpio_init(void)
+ 
+ 	return ret;
+ }
+-module_init(i2c_gpio_init);
++subsys_initcall(i2c_gpio_init);
+ 
+ static void __exit i2c_gpio_exit(void)
+ {
diff --git a/target/linux/generic/patches-2.6.32/940-wireless_mesh_header.patch b/target/linux/generic/patches-2.6.32/940-wireless_mesh_header.patch
new file mode 100644
index 0000000000..bd44529fbb
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/940-wireless_mesh_header.patch
@@ -0,0 +1,11 @@
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -98,7 +98,7 @@ typedef enum netdev_tx netdev_tx_t;
+  */
+ 
+ #if defined(CONFIG_WLAN_80211) || defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
+-# if defined(CONFIG_MAC80211_MESH)
++# if 1 || defined(CONFIG_MAC80211_MESH)
+ #  define LL_MAX_HEADER 128
+ # else
+ #  define LL_MAX_HEADER 96
diff --git a/target/linux/generic/patches-2.6.32/951-revert_gcc4_4_fixes.patch b/target/linux/generic/patches-2.6.32/951-revert_gcc4_4_fixes.patch
new file mode 100644
index 0000000000..d2c76a8f2b
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/951-revert_gcc4_4_fixes.patch
@@ -0,0 +1,524 @@
+--- a/arch/powerpc/boot/crtsavres.S
++++ /dev/null
+@@ -1,233 +0,0 @@
+-/*
+- * Special support for eabi and SVR4
+- *
+- *   Copyright (C) 1995, 1996, 1998, 2000, 2001 Free Software Foundation, Inc.
+- *   Copyright 2008 Freescale Semiconductor, Inc.
+- *   Written By Michael Meissner
+- *
+- * Based on gcc/config/rs6000/crtsavres.asm from gcc
+- *
+- * This file is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License as published by the
+- * Free Software Foundation; either version 2, or (at your option) any
+- * later version.
+- *
+- * In addition to the permissions in the GNU General Public License, the
+- * Free Software Foundation gives you unlimited permission to link the
+- * compiled version of this file with other programs, and to distribute
+- * those programs without any restriction coming from the use of this
+- * file.  (The General Public License restrictions do apply in other
+- * respects; for example, they cover modification of the file, and
+- * distribution when not linked into another program.)
+- *
+- * This file is distributed in the hope that it will be useful, but
+- * WITHOUT ANY WARRANTY; without even the implied warranty of
+- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+- * General Public License for more details.
+- *
+- * You should have received a copy of the GNU General Public License
+- * along with this program; see the file COPYING.  If not, write to
+- * the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+- * Boston, MA 02110-1301, USA.
+- *
+- *    As a special exception, if you link this library with files
+- *    compiled with GCC to produce an executable, this does not cause
+- *    the resulting executable to be covered by the GNU General Public License.
+- *    This exception does not however invalidate any other reasons why
+- *    the executable file might be covered by the GNU General Public License.
+- */
+-
+-	.file	"crtsavres.S"
+-	.section ".text"
+-
+-/* On PowerPC64 Linux, these functions are provided by the linker.  */
+-#ifndef __powerpc64__
+-
+-#define _GLOBAL(name) \
+-	.type name,@function; \
+-	.globl name; \
+-name:
+-
+-/* Routines for saving integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer save area.  */
+-
+-_GLOBAL(_savegpr_14)
+-_GLOBAL(_save32gpr_14)
+-	stw	14,-72(11)	/* save gp registers */
+-_GLOBAL(_savegpr_15)
+-_GLOBAL(_save32gpr_15)
+-	stw	15,-68(11)
+-_GLOBAL(_savegpr_16)
+-_GLOBAL(_save32gpr_16)
+-	stw	16,-64(11)
+-_GLOBAL(_savegpr_17)
+-_GLOBAL(_save32gpr_17)
+-	stw	17,-60(11)
+-_GLOBAL(_savegpr_18)
+-_GLOBAL(_save32gpr_18)
+-	stw	18,-56(11)
+-_GLOBAL(_savegpr_19)
+-_GLOBAL(_save32gpr_19)
+-	stw	19,-52(11)
+-_GLOBAL(_savegpr_20)
+-_GLOBAL(_save32gpr_20)
+-	stw	20,-48(11)
+-_GLOBAL(_savegpr_21)
+-_GLOBAL(_save32gpr_21)
+-	stw	21,-44(11)
+-_GLOBAL(_savegpr_22)
+-_GLOBAL(_save32gpr_22)
+-	stw	22,-40(11)
+-_GLOBAL(_savegpr_23)
+-_GLOBAL(_save32gpr_23)
+-	stw	23,-36(11)
+-_GLOBAL(_savegpr_24)
+-_GLOBAL(_save32gpr_24)
+-	stw	24,-32(11)
+-_GLOBAL(_savegpr_25)
+-_GLOBAL(_save32gpr_25)
+-	stw	25,-28(11)
+-_GLOBAL(_savegpr_26)
+-_GLOBAL(_save32gpr_26)
+-	stw	26,-24(11)
+-_GLOBAL(_savegpr_27)
+-_GLOBAL(_save32gpr_27)
+-	stw	27,-20(11)
+-_GLOBAL(_savegpr_28)
+-_GLOBAL(_save32gpr_28)
+-	stw	28,-16(11)
+-_GLOBAL(_savegpr_29)
+-_GLOBAL(_save32gpr_29)
+-	stw	29,-12(11)
+-_GLOBAL(_savegpr_30)
+-_GLOBAL(_save32gpr_30)
+-	stw	30,-8(11)
+-_GLOBAL(_savegpr_31)
+-_GLOBAL(_save32gpr_31)
+-	stw	31,-4(11)
+-	blr
+-
+-/* Routines for restoring integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer restore area.  */
+-
+-_GLOBAL(_restgpr_14)
+-_GLOBAL(_rest32gpr_14)
+-	lwz	14,-72(11)	/* restore gp registers */
+-_GLOBAL(_restgpr_15)
+-_GLOBAL(_rest32gpr_15)
+-	lwz	15,-68(11)
+-_GLOBAL(_restgpr_16)
+-_GLOBAL(_rest32gpr_16)
+-	lwz	16,-64(11)
+-_GLOBAL(_restgpr_17)
+-_GLOBAL(_rest32gpr_17)
+-	lwz	17,-60(11)
+-_GLOBAL(_restgpr_18)
+-_GLOBAL(_rest32gpr_18)
+-	lwz	18,-56(11)
+-_GLOBAL(_restgpr_19)
+-_GLOBAL(_rest32gpr_19)
+-	lwz	19,-52(11)
+-_GLOBAL(_restgpr_20)
+-_GLOBAL(_rest32gpr_20)
+-	lwz	20,-48(11)
+-_GLOBAL(_restgpr_21)
+-_GLOBAL(_rest32gpr_21)
+-	lwz	21,-44(11)
+-_GLOBAL(_restgpr_22)
+-_GLOBAL(_rest32gpr_22)
+-	lwz	22,-40(11)
+-_GLOBAL(_restgpr_23)
+-_GLOBAL(_rest32gpr_23)
+-	lwz	23,-36(11)
+-_GLOBAL(_restgpr_24)
+-_GLOBAL(_rest32gpr_24)
+-	lwz	24,-32(11)
+-_GLOBAL(_restgpr_25)
+-_GLOBAL(_rest32gpr_25)
+-	lwz	25,-28(11)
+-_GLOBAL(_restgpr_26)
+-_GLOBAL(_rest32gpr_26)
+-	lwz	26,-24(11)
+-_GLOBAL(_restgpr_27)
+-_GLOBAL(_rest32gpr_27)
+-	lwz	27,-20(11)
+-_GLOBAL(_restgpr_28)
+-_GLOBAL(_rest32gpr_28)
+-	lwz	28,-16(11)
+-_GLOBAL(_restgpr_29)
+-_GLOBAL(_rest32gpr_29)
+-	lwz	29,-12(11)
+-_GLOBAL(_restgpr_30)
+-_GLOBAL(_rest32gpr_30)
+-	lwz	30,-8(11)
+-_GLOBAL(_restgpr_31)
+-_GLOBAL(_rest32gpr_31)
+-	lwz	31,-4(11)
+-	blr
+-
+-/* Routines for restoring integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer restore area.  */
+-
+-_GLOBAL(_restgpr_14_x)
+-_GLOBAL(_rest32gpr_14_x)
+-	lwz	14,-72(11)	/* restore gp registers */
+-_GLOBAL(_restgpr_15_x)
+-_GLOBAL(_rest32gpr_15_x)
+-	lwz	15,-68(11)
+-_GLOBAL(_restgpr_16_x)
+-_GLOBAL(_rest32gpr_16_x)
+-	lwz	16,-64(11)
+-_GLOBAL(_restgpr_17_x)
+-_GLOBAL(_rest32gpr_17_x)
+-	lwz	17,-60(11)
+-_GLOBAL(_restgpr_18_x)
+-_GLOBAL(_rest32gpr_18_x)
+-	lwz	18,-56(11)
+-_GLOBAL(_restgpr_19_x)
+-_GLOBAL(_rest32gpr_19_x)
+-	lwz	19,-52(11)
+-_GLOBAL(_restgpr_20_x)
+-_GLOBAL(_rest32gpr_20_x)
+-	lwz	20,-48(11)
+-_GLOBAL(_restgpr_21_x)
+-_GLOBAL(_rest32gpr_21_x)
+-	lwz	21,-44(11)
+-_GLOBAL(_restgpr_22_x)
+-_GLOBAL(_rest32gpr_22_x)
+-	lwz	22,-40(11)
+-_GLOBAL(_restgpr_23_x)
+-_GLOBAL(_rest32gpr_23_x)
+-	lwz	23,-36(11)
+-_GLOBAL(_restgpr_24_x)
+-_GLOBAL(_rest32gpr_24_x)
+-	lwz	24,-32(11)
+-_GLOBAL(_restgpr_25_x)
+-_GLOBAL(_rest32gpr_25_x)
+-	lwz	25,-28(11)
+-_GLOBAL(_restgpr_26_x)
+-_GLOBAL(_rest32gpr_26_x)
+-	lwz	26,-24(11)
+-_GLOBAL(_restgpr_27_x)
+-_GLOBAL(_rest32gpr_27_x)
+-	lwz	27,-20(11)
+-_GLOBAL(_restgpr_28_x)
+-_GLOBAL(_rest32gpr_28_x)
+-	lwz	28,-16(11)
+-_GLOBAL(_restgpr_29_x)
+-_GLOBAL(_rest32gpr_29_x)
+-	lwz	29,-12(11)
+-_GLOBAL(_restgpr_30_x)
+-_GLOBAL(_rest32gpr_30_x)
+-	lwz	30,-8(11)
+-_GLOBAL(_restgpr_31_x)
+-_GLOBAL(_rest32gpr_31_x)
+-	lwz	0,4(11)
+-	lwz	31,-4(11)
+-	mtlr	0
+-	mr	1,11
+-	blr
+-#endif
+--- a/arch/powerpc/boot/Makefile
++++ b/arch/powerpc/boot/Makefile
+@@ -60,7 +60,7 @@ libfdtheader := fdt.h libfdt.h libfdt_in
+ $(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o): \
+ 	$(addprefix $(obj)/,$(libfdtheader))
+ 
+-src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
++src-wlib := string.S crt0.S stdio.c main.c \
+ 		$(libfdt) libfdt-wrapper.c \
+ 		ns16550.c serial.c simple_alloc.c div64.S util.S \
+ 		gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
+--- a/arch/powerpc/kernel/prom_init_check.sh
++++ b/arch/powerpc/kernel/prom_init_check.sh
+@@ -48,20 +48,6 @@ do
+ 		fi
+ 	done
+ 
+-	# ignore register save/restore funcitons
+-	if [ "${UNDEF:0:9}" = "_restgpr_" ]; then
+-		OK=1
+-	fi
+-	if [ "${UNDEF:0:11}" = "_rest32gpr_" ]; then
+-		OK=1
+-	fi
+-	if [ "${UNDEF:0:9}" = "_savegpr_" ]; then
+-		OK=1
+-	fi
+-	if [ "${UNDEF:0:11}" = "_save32gpr_" ]; then
+-		OK=1
+-	fi
+-
+ 	if [ $OK -eq 0 ]; then
+ 		ERROR=1
+ 		echo "Error: External symbol '$UNDEF' referenced" \
+--- a/arch/powerpc/lib/crtsavres.S
++++ /dev/null
+@@ -1,229 +0,0 @@
+-/*
+- * Special support for eabi and SVR4
+- *
+- *   Copyright (C) 1995, 1996, 1998, 2000, 2001 Free Software Foundation, Inc.
+- *   Copyright 2008 Freescale Semiconductor, Inc.
+- *   Written By Michael Meissner
+- *
+- * Based on gcc/config/rs6000/crtsavres.asm from gcc
+- *
+- * This file is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License as published by the
+- * Free Software Foundation; either version 2, or (at your option) any
+- * later version.
+- *
+- * In addition to the permissions in the GNU General Public License, the
+- * Free Software Foundation gives you unlimited permission to link the
+- * compiled version of this file with other programs, and to distribute
+- * those programs without any restriction coming from the use of this
+- * file.  (The General Public License restrictions do apply in other
+- * respects; for example, they cover modification of the file, and
+- * distribution when not linked into another program.)
+- *
+- * This file is distributed in the hope that it will be useful, but
+- * WITHOUT ANY WARRANTY; without even the implied warranty of
+- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+- * General Public License for more details.
+- *
+- * You should have received a copy of the GNU General Public License
+- * along with this program; see the file COPYING.  If not, write to
+- * the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+- * Boston, MA 02110-1301, USA.
+- *
+- *    As a special exception, if you link this library with files
+- *    compiled with GCC to produce an executable, this does not cause
+- *    the resulting executable to be covered by the GNU General Public License.
+- *    This exception does not however invalidate any other reasons why
+- *    the executable file might be covered by the GNU General Public License.
+- */
+-
+-#include <asm/ppc_asm.h>
+-
+-	.file	"crtsavres.S"
+-	.section ".text"
+-
+-#ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+-
+-/* Routines for saving integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer save area.  */
+-
+-_GLOBAL(_savegpr_14)
+-_GLOBAL(_save32gpr_14)
+-	stw	14,-72(11)	/* save gp registers */
+-_GLOBAL(_savegpr_15)
+-_GLOBAL(_save32gpr_15)
+-	stw	15,-68(11)
+-_GLOBAL(_savegpr_16)
+-_GLOBAL(_save32gpr_16)
+-	stw	16,-64(11)
+-_GLOBAL(_savegpr_17)
+-_GLOBAL(_save32gpr_17)
+-	stw	17,-60(11)
+-_GLOBAL(_savegpr_18)
+-_GLOBAL(_save32gpr_18)
+-	stw	18,-56(11)
+-_GLOBAL(_savegpr_19)
+-_GLOBAL(_save32gpr_19)
+-	stw	19,-52(11)
+-_GLOBAL(_savegpr_20)
+-_GLOBAL(_save32gpr_20)
+-	stw	20,-48(11)
+-_GLOBAL(_savegpr_21)
+-_GLOBAL(_save32gpr_21)
+-	stw	21,-44(11)
+-_GLOBAL(_savegpr_22)
+-_GLOBAL(_save32gpr_22)
+-	stw	22,-40(11)
+-_GLOBAL(_savegpr_23)
+-_GLOBAL(_save32gpr_23)
+-	stw	23,-36(11)
+-_GLOBAL(_savegpr_24)
+-_GLOBAL(_save32gpr_24)
+-	stw	24,-32(11)
+-_GLOBAL(_savegpr_25)
+-_GLOBAL(_save32gpr_25)
+-	stw	25,-28(11)
+-_GLOBAL(_savegpr_26)
+-_GLOBAL(_save32gpr_26)
+-	stw	26,-24(11)
+-_GLOBAL(_savegpr_27)
+-_GLOBAL(_save32gpr_27)
+-	stw	27,-20(11)
+-_GLOBAL(_savegpr_28)
+-_GLOBAL(_save32gpr_28)
+-	stw	28,-16(11)
+-_GLOBAL(_savegpr_29)
+-_GLOBAL(_save32gpr_29)
+-	stw	29,-12(11)
+-_GLOBAL(_savegpr_30)
+-_GLOBAL(_save32gpr_30)
+-	stw	30,-8(11)
+-_GLOBAL(_savegpr_31)
+-_GLOBAL(_save32gpr_31)
+-	stw	31,-4(11)
+-	blr
+-
+-/* Routines for restoring integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer restore area.  */
+-
+-_GLOBAL(_restgpr_14)
+-_GLOBAL(_rest32gpr_14)
+-	lwz	14,-72(11)	/* restore gp registers */
+-_GLOBAL(_restgpr_15)
+-_GLOBAL(_rest32gpr_15)
+-	lwz	15,-68(11)
+-_GLOBAL(_restgpr_16)
+-_GLOBAL(_rest32gpr_16)
+-	lwz	16,-64(11)
+-_GLOBAL(_restgpr_17)
+-_GLOBAL(_rest32gpr_17)
+-	lwz	17,-60(11)
+-_GLOBAL(_restgpr_18)
+-_GLOBAL(_rest32gpr_18)
+-	lwz	18,-56(11)
+-_GLOBAL(_restgpr_19)
+-_GLOBAL(_rest32gpr_19)
+-	lwz	19,-52(11)
+-_GLOBAL(_restgpr_20)
+-_GLOBAL(_rest32gpr_20)
+-	lwz	20,-48(11)
+-_GLOBAL(_restgpr_21)
+-_GLOBAL(_rest32gpr_21)
+-	lwz	21,-44(11)
+-_GLOBAL(_restgpr_22)
+-_GLOBAL(_rest32gpr_22)
+-	lwz	22,-40(11)
+-_GLOBAL(_restgpr_23)
+-_GLOBAL(_rest32gpr_23)
+-	lwz	23,-36(11)
+-_GLOBAL(_restgpr_24)
+-_GLOBAL(_rest32gpr_24)
+-	lwz	24,-32(11)
+-_GLOBAL(_restgpr_25)
+-_GLOBAL(_rest32gpr_25)
+-	lwz	25,-28(11)
+-_GLOBAL(_restgpr_26)
+-_GLOBAL(_rest32gpr_26)
+-	lwz	26,-24(11)
+-_GLOBAL(_restgpr_27)
+-_GLOBAL(_rest32gpr_27)
+-	lwz	27,-20(11)
+-_GLOBAL(_restgpr_28)
+-_GLOBAL(_rest32gpr_28)
+-	lwz	28,-16(11)
+-_GLOBAL(_restgpr_29)
+-_GLOBAL(_rest32gpr_29)
+-	lwz	29,-12(11)
+-_GLOBAL(_restgpr_30)
+-_GLOBAL(_rest32gpr_30)
+-	lwz	30,-8(11)
+-_GLOBAL(_restgpr_31)
+-_GLOBAL(_rest32gpr_31)
+-	lwz	31,-4(11)
+-	blr
+-
+-/* Routines for restoring integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer restore area.  */
+-
+-_GLOBAL(_restgpr_14_x)
+-_GLOBAL(_rest32gpr_14_x)
+-	lwz	14,-72(11)	/* restore gp registers */
+-_GLOBAL(_restgpr_15_x)
+-_GLOBAL(_rest32gpr_15_x)
+-	lwz	15,-68(11)
+-_GLOBAL(_restgpr_16_x)
+-_GLOBAL(_rest32gpr_16_x)
+-	lwz	16,-64(11)
+-_GLOBAL(_restgpr_17_x)
+-_GLOBAL(_rest32gpr_17_x)
+-	lwz	17,-60(11)
+-_GLOBAL(_restgpr_18_x)
+-_GLOBAL(_rest32gpr_18_x)
+-	lwz	18,-56(11)
+-_GLOBAL(_restgpr_19_x)
+-_GLOBAL(_rest32gpr_19_x)
+-	lwz	19,-52(11)
+-_GLOBAL(_restgpr_20_x)
+-_GLOBAL(_rest32gpr_20_x)
+-	lwz	20,-48(11)
+-_GLOBAL(_restgpr_21_x)
+-_GLOBAL(_rest32gpr_21_x)
+-	lwz	21,-44(11)
+-_GLOBAL(_restgpr_22_x)
+-_GLOBAL(_rest32gpr_22_x)
+-	lwz	22,-40(11)
+-_GLOBAL(_restgpr_23_x)
+-_GLOBAL(_rest32gpr_23_x)
+-	lwz	23,-36(11)
+-_GLOBAL(_restgpr_24_x)
+-_GLOBAL(_rest32gpr_24_x)
+-	lwz	24,-32(11)
+-_GLOBAL(_restgpr_25_x)
+-_GLOBAL(_rest32gpr_25_x)
+-	lwz	25,-28(11)
+-_GLOBAL(_restgpr_26_x)
+-_GLOBAL(_rest32gpr_26_x)
+-	lwz	26,-24(11)
+-_GLOBAL(_restgpr_27_x)
+-_GLOBAL(_rest32gpr_27_x)
+-	lwz	27,-20(11)
+-_GLOBAL(_restgpr_28_x)
+-_GLOBAL(_rest32gpr_28_x)
+-	lwz	28,-16(11)
+-_GLOBAL(_restgpr_29_x)
+-_GLOBAL(_rest32gpr_29_x)
+-	lwz	29,-12(11)
+-_GLOBAL(_restgpr_30_x)
+-_GLOBAL(_rest32gpr_30_x)
+-	lwz	30,-8(11)
+-_GLOBAL(_restgpr_31_x)
+-_GLOBAL(_rest32gpr_31_x)
+-	lwz	0,4(11)
+-	lwz	31,-4(11)
+-	mtlr	0
+-	mr	1,11
+-	blr
+-#endif
+--- a/arch/powerpc/lib/Makefile
++++ b/arch/powerpc/lib/Makefile
+@@ -13,7 +13,7 @@ CFLAGS_REMOVE_feature-fixups.o = -pg
+ 
+ obj-y			:= string.o alloc.o \
+ 			   checksum_$(CONFIG_WORD_SIZE).o
+-obj-$(CONFIG_PPC32)	+= div64.o copy_32.o crtsavres.o
++obj-$(CONFIG_PPC32)	+= div64.o copy_32.o
+ obj-$(CONFIG_HAS_IOMEM)	+= devres.o
+ 
+ obj-$(CONFIG_PPC64)	+= copypage_64.o copyuser_64.o \
+--- a/arch/powerpc/Makefile
++++ b/arch/powerpc/Makefile
+@@ -92,8 +92,6 @@ endif
+ else
+ 	KBUILD_CFLAGS += $(call cc-option,-mtune=power4)
+ endif
+-else
+-LDFLAGS_MODULE	+= arch/powerpc/lib/crtsavres.o
+ endif
+ 
+ ifeq ($(CONFIG_TUNE_CELL),y)
diff --git a/target/linux/generic/patches-2.6.32/970-ocf_kbuild_integration.patch b/target/linux/generic/patches-2.6.32/970-ocf_kbuild_integration.patch
new file mode 100644
index 0000000000..f1823ecb46
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/970-ocf_kbuild_integration.patch
@@ -0,0 +1,20 @@
+--- a/crypto/Kconfig
++++ b/crypto/Kconfig
+@@ -817,3 +817,6 @@ config CRYPTO_ANSI_CPRNG
+ source "drivers/crypto/Kconfig"
+ 
+ endif	# if CRYPTO
++
++source "crypto/ocf/Kconfig"
++
+--- a/crypto/Makefile
++++ b/crypto/Makefile
+@@ -85,6 +85,8 @@ obj-$(CONFIG_CRYPTO_ANSI_CPRNG) += ansi_
+ obj-$(CONFIG_CRYPTO_TEST) += tcrypt.o
+ obj-$(CONFIG_CRYPTO_GHASH) += ghash-generic.o
+ 
++obj-$(CONFIG_OCF_OCF) += ocf/
++
+ #
+ # generic algorithms and the async_tx api
+ #
diff --git a/target/linux/generic/patches-2.6.32/971-ocf_20100325.patch b/target/linux/generic/patches-2.6.32/971-ocf_20100325.patch
new file mode 100644
index 0000000000..0b0c1e279c
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/971-ocf_20100325.patch
@@ -0,0 +1,170 @@
+--- a/drivers/char/random.c
++++ b/drivers/char/random.c
+@@ -129,6 +129,9 @@
+  *                                unsigned int value);
+  * 	void add_interrupt_randomness(int irq);
+  *
++ *      void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
++ *      int random_input_wait(void);
++ *
+  * add_input_randomness() uses the input layer interrupt timing, as well as
+  * the event type information from the hardware.
+  *
+@@ -140,6 +143,13 @@
+  * a better measure, since the timing of the disk interrupts are more
+  * unpredictable.
+  *
++ * random_input_words() just provides a raw block of entropy to the input
++ * pool, such as from a hardware entropy generator.
++ *
++ * random_input_wait() suspends the caller until such time as the
++ * entropy pool falls below the write threshold, and returns a count of how
++ * much entropy (in bits) is needed to sustain the pool.
++ *
+  * All of these routines try to estimate how many bits of randomness a
+  * particular randomness source.  They do this by keeping track of the
+  * first and second order deltas of the event timings.
+@@ -714,6 +724,61 @@ void add_disk_randomness(struct gendisk 
+ }
+ #endif
+ 
++/*
++ * random_input_words - add bulk entropy to pool
++ *
++ * @buf: buffer to add
++ * @wordcount: number of __u32 words to add
++ * @ent_count: total amount of entropy (in bits) to credit
++ *
++ * this provides bulk input of entropy to the input pool
++ *
++ */
++void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
++{
++	mix_pool_bytes(&input_pool, buf, wordcount*4);
++
++	credit_entropy_bits(&input_pool, ent_count);
++
++	DEBUG_ENT("crediting %d bits => %d\n",
++		  ent_count, input_pool.entropy_count);
++	/*
++	 * Wake up waiting processes if we have enough
++	 * entropy.
++	 */
++	if (input_pool.entropy_count >= random_read_wakeup_thresh)
++		wake_up_interruptible(&random_read_wait);
++}
++EXPORT_SYMBOL(random_input_words);
++
++/*
++ * random_input_wait - wait until random needs entropy
++ *
++ * this function sleeps until the /dev/random subsystem actually
++ * needs more entropy, and then return the amount of entropy
++ * that it would be nice to have added to the system.
++ */
++int random_input_wait(void)
++{
++	int count;
++
++	wait_event_interruptible(random_write_wait, 
++			 input_pool.entropy_count < random_write_wakeup_thresh);
++
++	count = random_write_wakeup_thresh - input_pool.entropy_count;
++
++        /* likely we got woken up due to a signal */
++	if (count <= 0) count = random_read_wakeup_thresh; 
++
++	DEBUG_ENT("requesting %d bits from input_wait()er %d<%d\n",
++		  count,
++		  input_pool.entropy_count, random_write_wakeup_thresh);
++
++	return count;
++}
++EXPORT_SYMBOL(random_input_wait);
++
++
+ #define EXTRACT_SIZE 10
+ 
+ /*********************************************************************
+--- a/fs/fcntl.c
++++ b/fs/fcntl.c
+@@ -141,6 +141,7 @@ SYSCALL_DEFINE1(dup, unsigned int, filde
+ 	}
+ 	return ret;
+ }
++EXPORT_SYMBOL(sys_dup);
+ 
+ #define SETFL_MASK (O_APPEND | O_NONBLOCK | O_NDELAY | O_DIRECT | O_NOATIME)
+ 
+--- a/include/linux/miscdevice.h
++++ b/include/linux/miscdevice.h
+@@ -12,6 +12,7 @@
+ #define APOLLO_MOUSE_MINOR	7
+ #define PC110PAD_MINOR		9
+ /*#define ADB_MOUSE_MINOR	10	FIXME OBSOLETE */
++#define CRYPTODEV_MINOR		70	/* /dev/crypto */
+ #define WATCHDOG_MINOR		130	/* Watchdog timer     */
+ #define TEMP_MINOR		131	/* Temperature Sensor */
+ #define RTC_MINOR		135
+--- a/include/linux/random.h
++++ b/include/linux/random.h
+@@ -9,6 +9,7 @@
+ 
+ #include <linux/types.h>
+ #include <linux/ioctl.h>
++#include <linux/types.h> /* for __u32 in user space */
+ #include <linux/irqnr.h>
+ 
+ /* ioctl()'s for the random number generator */
+@@ -34,6 +35,30 @@
+ /* Clear the entropy pool and associated counters.  (Superuser only.) */
+ #define RNDCLEARPOOL	_IO( 'R', 0x06 )
+ 
++#ifdef CONFIG_FIPS_RNG
++
++/* Size of seed value - equal to AES blocksize */
++#define AES_BLOCK_SIZE_BYTES	16
++#define SEED_SIZE_BYTES			AES_BLOCK_SIZE_BYTES
++/* Size of AES key */
++#define KEY_SIZE_BYTES		16
++
++/* ioctl() structure used by FIPS 140-2 Tests */
++struct rand_fips_test {
++	unsigned char key[KEY_SIZE_BYTES];			/* Input */
++	unsigned char datetime[SEED_SIZE_BYTES];	/* Input */
++	unsigned char seed[SEED_SIZE_BYTES];		/* Input */
++	unsigned char result[SEED_SIZE_BYTES];		/* Output */
++};
++
++/* FIPS 140-2 RNG Variable Seed Test. (Superuser only.) */
++#define RNDFIPSVST	_IOWR('R', 0x10, struct rand_fips_test)
++
++/* FIPS 140-2 RNG Monte Carlo Test. (Superuser only.) */
++#define RNDFIPSMCT	_IOWR('R', 0x11, struct rand_fips_test)
++
++#endif /* #ifdef CONFIG_FIPS_RNG */
++
+ struct rand_pool_info {
+ 	int	entropy_count;
+ 	int	buf_size;
+@@ -50,6 +75,10 @@ extern void add_input_randomness(unsigne
+ 				 unsigned int value);
+ extern void add_interrupt_randomness(int irq);
+ 
++extern void random_input_words(__u32 *buf, size_t wordcount, int ent_count);
++extern int random_input_wait(void);
++#define HAS_RANDOM_INPUT_WAIT 1
++
+ extern void get_random_bytes(void *buf, int nbytes);
+ void generate_random_uuid(unsigned char uuid_out[16]);
+ 
+--- a/kernel/pid.c
++++ b/kernel/pid.c
+@@ -387,6 +387,7 @@ struct task_struct *find_task_by_vpid(pi
+ {
+ 	return find_task_by_pid_ns(vnr, current->nsproxy->pid_ns);
+ }
++EXPORT_SYMBOL(find_task_by_vpid);
+ 
+ struct pid *get_task_pid(struct task_struct *task, enum pid_type type)
+ {
diff --git a/target/linux/generic/patches-2.6.32/974-ssb_b43_default_on.patch b/target/linux/generic/patches-2.6.32/974-ssb_b43_default_on.patch
new file mode 100644
index 0000000000..3176dcb4d8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/974-ssb_b43_default_on.patch
@@ -0,0 +1,19 @@
+--- a/drivers/ssb/Kconfig
++++ b/drivers/ssb/Kconfig
+@@ -29,6 +29,7 @@ config SSB_SPROM
+ config SSB_BLOCKIO
+ 	bool
+ 	depends on SSB
++	default y
+ 
+ config SSB_PCIHOST_POSSIBLE
+ 	bool
+@@ -49,7 +50,7 @@ config SSB_PCIHOST
+ config SSB_B43_PCI_BRIDGE
+ 	bool
+ 	depends on SSB_PCIHOST
+-	default n
++	default y
+ 
+ config SSB_PCMCIAHOST_POSSIBLE
+ 	bool
diff --git a/target/linux/generic/patches-2.6.32/975-hifn795x-byteswap.patch b/target/linux/generic/patches-2.6.32/975-hifn795x-byteswap.patch
new file mode 100644
index 0000000000..3a37c951ec
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/975-hifn795x-byteswap.patch
@@ -0,0 +1,17 @@
+--- a/drivers/crypto/hifn_795x.c
++++ b/drivers/crypto/hifn_795x.c
+@@ -682,12 +682,12 @@ static inline u32 hifn_read_1(struct hif
+ 
+ static inline void hifn_write_0(struct hifn_device *dev, u32 reg, u32 val)
+ {
+-	writel((__force u32)cpu_to_le32(val), dev->bar[0] + reg);
++	writel(val, dev->bar[0] + reg);
+ }
+ 
+ static inline void hifn_write_1(struct hifn_device *dev, u32 reg, u32 val)
+ {
+-	writel((__force u32)cpu_to_le32(val), dev->bar[1] + reg);
++	writel(val, dev->bar[1] + reg);
+ }
+ 
+ static void hifn_wait_puc(struct hifn_device *dev)
diff --git a/target/linux/generic/patches-2.6.32/975-ssb_update.patch b/target/linux/generic/patches-2.6.32/975-ssb_update.patch
new file mode 100644
index 0000000000..f48c58052f
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/975-ssb_update.patch
@@ -0,0 +1,1231 @@
+--- a/drivers/ssb/driver_chipcommon.c
++++ b/drivers/ssb/driver_chipcommon.c
+@@ -233,6 +233,8 @@ void ssb_chipcommon_init(struct ssb_chip
+ {
+ 	if (!cc->dev)
+ 		return; /* We don't have a ChipCommon */
++	if (cc->dev->id.revision >= 11)
++		cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
+ 	ssb_pmu_init(cc);
+ 	chipco_powercontrol_init(cc);
+ 	ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
+@@ -370,6 +372,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c
+ {
+ 	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
+ }
++EXPORT_SYMBOL(ssb_chipco_gpio_control);
+ 
+ u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
+ {
+--- a/drivers/ssb/driver_chipcommon_pmu.c
++++ b/drivers/ssb/driver_chipcommon_pmu.c
+@@ -332,6 +332,12 @@ static void ssb_pmu_pll_init(struct ssb_
+ 	case 0x5354:
+ 		ssb_pmu0_pllinit_r0(cc, crystalfreq);
+ 		break;
++	case 0x4322:
++		if (cc->pmu.rev == 2) {
++			chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, 0x0000000A);
++			chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, 0x380005C0);
++		}
++		break;
+ 	default:
+ 		ssb_printk(KERN_ERR PFX
+ 			   "ERROR: PLL init unknown for device %04X\n",
+@@ -417,6 +423,7 @@ static void ssb_pmu_resources_init(struc
+ 
+ 	switch (bus->chip_id) {
+ 	case 0x4312:
++	case 0x4322:
+ 		/* We keep the default settings:
+ 		 * min_msk = 0xCBB
+ 		 * max_msk = 0x7FFFF
+--- a/drivers/ssb/driver_gige.c
++++ b/drivers/ssb/driver_gige.c
+@@ -12,6 +12,7 @@
+ #include <linux/ssb/ssb_driver_gige.h>
+ #include <linux/pci.h>
+ #include <linux/pci_regs.h>
++#include <linux/slab.h>
+ 
+ 
+ /*
+--- a/drivers/ssb/driver_mipscore.c
++++ b/drivers/ssb/driver_mipscore.c
+@@ -270,7 +270,6 @@ void ssb_mipscore_init(struct ssb_mipsco
+ 				set_irq(dev, irq++);
+ 			}
+ 			break;
+-			/* fallthrough */
+ 		case SSB_DEV_PCI:
+ 		case SSB_DEV_ETHERNET:
+ 		case SSB_DEV_ETHERNET_GBIT:
+@@ -281,6 +280,10 @@ void ssb_mipscore_init(struct ssb_mipsco
+ 				set_irq(dev, irq++);
+ 				break;
+ 			}
++			/* fallthrough */
++		case SSB_DEV_EXTIF:
++			set_irq(dev, 0);
++			break;
+ 		}
+ 	}
+ 	ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n");
+--- a/drivers/ssb/driver_pcicore.c
++++ b/drivers/ssb/driver_pcicore.c
+@@ -246,20 +246,12 @@ static struct pci_controller ssb_pcicore
+ 	.pci_ops	= &ssb_pcicore_pciops,
+ 	.io_resource	= &ssb_pcicore_io_resource,
+ 	.mem_resource	= &ssb_pcicore_mem_resource,
+-	.mem_offset	= 0x24000000,
+ };
+ 
+-static u32 ssb_pcicore_pcibus_iobase = 0x100;
+-static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA;
+-
+ /* This function is called when doing a pci_enable_device().
+  * We must first check if the device is a device on the PCI-core bridge. */
+ int ssb_pcicore_plat_dev_init(struct pci_dev *d)
+ {
+-	struct resource *res;
+-	int pos, size;
+-	u32 *base;
+-
+ 	if (d->bus->ops != &ssb_pcicore_pciops) {
+ 		/* This is not a device on the PCI-core bridge. */
+ 		return -ENODEV;
+@@ -268,27 +260,6 @@ int ssb_pcicore_plat_dev_init(struct pci
+ 	ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
+ 		   pci_name(d));
+ 
+-	/* Fix up resource bases */
+-	for (pos = 0; pos < 6; pos++) {
+-		res = &d->resource[pos];
+-		if (res->flags & IORESOURCE_IO)
+-			base = &ssb_pcicore_pcibus_iobase;
+-		else
+-			base = &ssb_pcicore_pcibus_membase;
+-		res->flags |= IORESOURCE_PCI_FIXED;
+-		if (res->end) {
+-			size = res->end - res->start + 1;
+-			if (*base & (size - 1))
+-				*base = (*base + size) & ~(size - 1);
+-			res->start = *base;
+-			res->end = res->start + size - 1;
+-			*base += size;
+-			pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
+-		}
+-		/* Fix up PCI bridge BAR0 only */
+-		if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0)
+-			break;
+-	}
+ 	/* Fix up interrupt lines */
+ 	d->irq = ssb_mips_irq(extpci_core->dev) + 2;
+ 	pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
+@@ -551,13 +522,13 @@ int ssb_pcicore_dev_irqvecs_enable(struc
+ 	might_sleep_if(pdev->id.coreid != SSB_DEV_PCI);
+ 
+ 	/* Enable interrupts for this device. */
+-	if (bus->host_pci &&
+-	    ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE))) {
++	if ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE)) {
+ 		u32 coremask;
+ 
+ 		/* Calculate the "coremask" for the device. */
+ 		coremask = (1 << dev->core_index);
+ 
++		SSB_WARN_ON(bus->bustype != SSB_BUSTYPE_PCI);
+ 		err = pci_read_config_dword(bus->host_pci, SSB_PCI_IRQMASK, &tmp);
+ 		if (err)
+ 			goto out;
+--- a/drivers/ssb/main.c
++++ b/drivers/ssb/main.c
+@@ -18,6 +18,7 @@
+ #include <linux/dma-mapping.h>
+ #include <linux/pci.h>
+ #include <linux/mmc/sdio_func.h>
++#include <linux/slab.h>
+ 
+ #include <pcmcia/cs_types.h>
+ #include <pcmcia/cs.h>
+@@ -140,6 +141,19 @@ static void ssb_device_put(struct ssb_de
+ 		put_device(dev->dev);
+ }
+ 
++static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv)
++{
++	if (drv)
++		get_driver(&drv->drv);
++	return drv;
++}
++
++static inline void ssb_driver_put(struct ssb_driver *drv)
++{
++	if (drv)
++		put_driver(&drv->drv);
++}
++
+ static int ssb_device_resume(struct device *dev)
+ {
+ 	struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
+@@ -210,90 +224,81 @@ int ssb_bus_suspend(struct ssb_bus *bus)
+ EXPORT_SYMBOL(ssb_bus_suspend);
+ 
+ #ifdef CONFIG_SSB_SPROM
+-int ssb_devices_freeze(struct ssb_bus *bus)
++/** ssb_devices_freeze - Freeze all devices on the bus.
++ *
++ * After freezing no device driver will be handling a device
++ * on this bus anymore. ssb_devices_thaw() must be called after
++ * a successful freeze to reactivate the devices.
++ *
++ * @bus: The bus.
++ * @ctx: Context structure. Pass this to ssb_devices_thaw().
++ */
++int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx)
+ {
+-	struct ssb_device *dev;
+-	struct ssb_driver *drv;
+-	int err = 0;
+-	int i;
+-	pm_message_t state = PMSG_FREEZE;
++	struct ssb_device *sdev;
++	struct ssb_driver *sdrv;
++	unsigned int i;
++
++	memset(ctx, 0, sizeof(*ctx));
++	ctx->bus = bus;
++	SSB_WARN_ON(bus->nr_devices > ARRAY_SIZE(ctx->device_frozen));
+ 
+-	/* First check that we are capable to freeze all devices. */
+ 	for (i = 0; i < bus->nr_devices; i++) {
+-		dev = &(bus->devices[i]);
+-		if (!dev->dev ||
+-		    !dev->dev->driver ||
+-		    !device_is_registered(dev->dev))
+-			continue;
+-		drv = drv_to_ssb_drv(dev->dev->driver);
+-		if (!drv)
++		sdev = ssb_device_get(&bus->devices[i]);
++
++		if (!sdev->dev || !sdev->dev->driver ||
++		    !device_is_registered(sdev->dev)) {
++			ssb_device_put(sdev);
+ 			continue;
+-		if (!drv->suspend) {
+-			/* Nope, can't suspend this one. */
+-			return -EOPNOTSUPP;
+ 		}
+-	}
+-	/* Now suspend all devices */
+-	for (i = 0; i < bus->nr_devices; i++) {
+-		dev = &(bus->devices[i]);
+-		if (!dev->dev ||
+-		    !dev->dev->driver ||
+-		    !device_is_registered(dev->dev))
++		sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver));
++		if (!sdrv || SSB_WARN_ON(!sdrv->remove)) {
++			ssb_device_put(sdev);
+ 			continue;
+-		drv = drv_to_ssb_drv(dev->dev->driver);
+-		if (!drv)
+-			continue;
+-		err = drv->suspend(dev, state);
+-		if (err) {
+-			ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n",
+-				   dev_name(dev->dev));
+-			goto err_unwind;
+ 		}
++		sdrv->remove(sdev);
++		ctx->device_frozen[i] = 1;
+ 	}
+ 
+ 	return 0;
+-err_unwind:
+-	for (i--; i >= 0; i--) {
+-		dev = &(bus->devices[i]);
+-		if (!dev->dev ||
+-		    !dev->dev->driver ||
+-		    !device_is_registered(dev->dev))
+-			continue;
+-		drv = drv_to_ssb_drv(dev->dev->driver);
+-		if (!drv)
+-			continue;
+-		if (drv->resume)
+-			drv->resume(dev);
+-	}
+-	return err;
+ }
+ 
+-int ssb_devices_thaw(struct ssb_bus *bus)
++/** ssb_devices_thaw - Unfreeze all devices on the bus.
++ *
++ * This will re-attach the device drivers and re-init the devices.
++ *
++ * @ctx: The context structure from ssb_devices_freeze()
++ */
++int ssb_devices_thaw(struct ssb_freeze_context *ctx)
+ {
+-	struct ssb_device *dev;
+-	struct ssb_driver *drv;
+-	int err;
+-	int i;
++	struct ssb_bus *bus = ctx->bus;
++	struct ssb_device *sdev;
++	struct ssb_driver *sdrv;
++	unsigned int i;
++	int err, result = 0;
+ 
+ 	for (i = 0; i < bus->nr_devices; i++) {
+-		dev = &(bus->devices[i]);
+-		if (!dev->dev ||
+-		    !dev->dev->driver ||
+-		    !device_is_registered(dev->dev))
++		if (!ctx->device_frozen[i])
+ 			continue;
+-		drv = drv_to_ssb_drv(dev->dev->driver);
+-		if (!drv)
++		sdev = &bus->devices[i];
++
++		if (SSB_WARN_ON(!sdev->dev || !sdev->dev->driver))
+ 			continue;
+-		if (SSB_WARN_ON(!drv->resume))
++		sdrv = drv_to_ssb_drv(sdev->dev->driver);
++		if (SSB_WARN_ON(!sdrv || !sdrv->probe))
+ 			continue;
+-		err = drv->resume(dev);
++
++		err = sdrv->probe(sdev, &sdev->id);
+ 		if (err) {
+ 			ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
+-				   dev_name(dev->dev));
++				   dev_name(sdev->dev));
++			result = err;
+ 		}
++		ssb_driver_put(sdrv);
++		ssb_device_put(sdev);
+ 	}
+ 
+-	return 0;
++	return result;
+ }
+ #endif /* CONFIG_SSB_SPROM */
+ 
+@@ -490,8 +495,7 @@ static int ssb_devices_register(struct s
+ #endif
+ 			break;
+ 		case SSB_BUSTYPE_SDIO:
+-#ifdef CONFIG_SSB_SDIO
+-			sdev->irq = bus->host_sdio->dev.irq;
++#ifdef CONFIG_SSB_SDIOHOST
+ 			dev->parent = &bus->host_sdio->dev;
+ #endif
+ 			break;
+@@ -830,6 +834,9 @@ int ssb_bus_pcibus_register(struct ssb_b
+ 	if (!err) {
+ 		ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+ 			   "PCI device %s\n", dev_name(&host_pci->dev));
++	} else {
++		ssb_printk(KERN_ERR PFX "Failed to register PCI version"
++			   " of SSB with error %d\n", err);
+ 	}
+ 
+ 	return err;
+--- a/drivers/ssb/pci.c
++++ b/drivers/ssb/pci.c
+@@ -17,6 +17,7 @@
+ 
+ #include <linux/ssb/ssb.h>
+ #include <linux/ssb/ssb_regs.h>
++#include <linux/slab.h>
+ #include <linux/pci.h>
+ #include <linux/delay.h>
+ 
+@@ -167,7 +168,7 @@ err_pci:
+ }
+ 
+ /* Get the word-offset for a SSB_SPROM_XXX define. */
+-#define SPOFF(offset)	(((offset) - SSB_SPROM_BASE) / sizeof(u16))
++#define SPOFF(offset)	((offset) / sizeof(u16))
+ /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
+ #define SPEX16(_outvar, _offset, _mask, _shift)	\
+ 	out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
+@@ -253,7 +254,7 @@ static int sprom_do_read(struct ssb_bus 
+ 	int i;
+ 
+ 	for (i = 0; i < bus->sprom_size; i++)
+-		sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2));
++		sprom[i] = ioread16(bus->mmio + bus->sprom_offset + (i * 2));
+ 
+ 	return 0;
+ }
+@@ -284,7 +285,7 @@ static int sprom_do_write(struct ssb_bus
+ 			ssb_printk("75%%");
+ 		else if (i % 2)
+ 			ssb_printk(".");
+-		writew(sprom[i], bus->mmio + SSB_SPROM_BASE + (i * 2));
++		writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
+ 		mmiowb();
+ 		msleep(20);
+ 	}
+@@ -620,6 +621,14 @@ static int ssb_pci_sprom_get(struct ssb_
+ 	int err = -ENOMEM;
+ 	u16 *buf;
+ 
++	if (!ssb_is_sprom_available(bus)) {
++		ssb_printk(KERN_ERR PFX "No SPROM available!\n");
++		return -ENODEV;
++	}
++
++	bus->sprom_offset = (bus->chipco.dev->id.revision < 31) ?
++		SSB_SPROM_BASE1 : SSB_SPROM_BASE31;
++
+ 	buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
+ 	if (!buf)
+ 		goto out;
+--- a/drivers/ssb/pcihost_wrapper.c
++++ b/drivers/ssb/pcihost_wrapper.c
+@@ -12,6 +12,7 @@
+  */
+ 
+ #include <linux/pci.h>
++#include <linux/slab.h>
+ #include <linux/ssb/ssb.h>
+ 
+ 
+--- a/drivers/ssb/pcmcia.c
++++ b/drivers/ssb/pcmcia.c
+@@ -617,136 +617,140 @@ static int ssb_pcmcia_sprom_check_crc(co
+ 	}						\
+   } while (0)
+ 
+-int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
+-			      struct ssb_init_invariants *iv)
++static int ssb_pcmcia_get_mac(struct pcmcia_device *p_dev,
++			tuple_t *tuple,
++			void *priv)
++{
++	struct ssb_sprom *sprom = priv;
++
++	if (tuple->TupleData[0] != CISTPL_FUNCE_LAN_NODE_ID)
++		return -EINVAL;
++	if (tuple->TupleDataLen != ETH_ALEN + 2)
++		return -EINVAL;
++	if (tuple->TupleData[1] != ETH_ALEN)
++		return -EINVAL;
++	memcpy(sprom->il0mac, &tuple->TupleData[2], ETH_ALEN);
++	return 0;
++};
++
++static int ssb_pcmcia_do_get_invariants(struct pcmcia_device *p_dev,
++					tuple_t *tuple,
++					void *priv)
+ {
+-	tuple_t tuple;
+-	int res;
+-	unsigned char buf[32];
++	struct ssb_init_invariants *iv = priv;
+ 	struct ssb_sprom *sprom = &iv->sprom;
+ 	struct ssb_boardinfo *bi = &iv->boardinfo;
+ 	const char *error_description;
+ 
++	GOTO_ERROR_ON(tuple->TupleDataLen < 1, "VEN tpl < 1");
++	switch (tuple->TupleData[0]) {
++	case SSB_PCMCIA_CIS_ID:
++		GOTO_ERROR_ON((tuple->TupleDataLen != 5) &&
++			      (tuple->TupleDataLen != 7),
++			      "id tpl size");
++		bi->vendor = tuple->TupleData[1] |
++			((u16)tuple->TupleData[2] << 8);
++		break;
++	case SSB_PCMCIA_CIS_BOARDREV:
++		GOTO_ERROR_ON(tuple->TupleDataLen != 2,
++			"boardrev tpl size");
++		sprom->board_rev = tuple->TupleData[1];
++		break;
++	case SSB_PCMCIA_CIS_PA:
++		GOTO_ERROR_ON((tuple->TupleDataLen != 9) &&
++			(tuple->TupleDataLen != 10),
++			"pa tpl size");
++		sprom->pa0b0 = tuple->TupleData[1] |
++			((u16)tuple->TupleData[2] << 8);
++		sprom->pa0b1 = tuple->TupleData[3] |
++			((u16)tuple->TupleData[4] << 8);
++		sprom->pa0b2 = tuple->TupleData[5] |
++			((u16)tuple->TupleData[6] << 8);
++		sprom->itssi_a = tuple->TupleData[7];
++		sprom->itssi_bg = tuple->TupleData[7];
++		sprom->maxpwr_a = tuple->TupleData[8];
++		sprom->maxpwr_bg = tuple->TupleData[8];
++		break;
++	case SSB_PCMCIA_CIS_OEMNAME:
++		/* We ignore this. */
++		break;
++	case SSB_PCMCIA_CIS_CCODE:
++		GOTO_ERROR_ON(tuple->TupleDataLen != 2,
++			"ccode tpl size");
++		sprom->country_code = tuple->TupleData[1];
++		break;
++	case SSB_PCMCIA_CIS_ANTENNA:
++		GOTO_ERROR_ON(tuple->TupleDataLen != 2,
++			"ant tpl size");
++		sprom->ant_available_a = tuple->TupleData[1];
++		sprom->ant_available_bg = tuple->TupleData[1];
++		break;
++	case SSB_PCMCIA_CIS_ANTGAIN:
++		GOTO_ERROR_ON(tuple->TupleDataLen != 2,
++			"antg tpl size");
++		sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1];
++		sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1];
++		sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1];
++		sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1];
++		sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1];
++		sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1];
++		sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1];
++		sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1];
++		break;
++	case SSB_PCMCIA_CIS_BFLAGS:
++		GOTO_ERROR_ON((tuple->TupleDataLen != 3) &&
++			(tuple->TupleDataLen != 5),
++			"bfl tpl size");
++		sprom->boardflags_lo = tuple->TupleData[1] |
++			((u16)tuple->TupleData[2] << 8);
++		break;
++	case SSB_PCMCIA_CIS_LEDS:
++		GOTO_ERROR_ON(tuple->TupleDataLen != 5,
++			"leds tpl size");
++		sprom->gpio0 = tuple->TupleData[1];
++		sprom->gpio1 = tuple->TupleData[2];
++		sprom->gpio2 = tuple->TupleData[3];
++		sprom->gpio3 = tuple->TupleData[4];
++		break;
++	}
++	return -ENOSPC; /* continue with next entry */
++
++error:
++	ssb_printk(KERN_ERR PFX
++		   "PCMCIA: Failed to fetch device invariants: %s\n",
++		   error_description);
++	return -ENODEV;
++}
++
++
++int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
++			      struct ssb_init_invariants *iv)
++{
++	struct ssb_sprom *sprom = &iv->sprom;
++	int res;
++
+ 	memset(sprom, 0xFF, sizeof(*sprom));
+ 	sprom->revision = 1;
+ 	sprom->boardflags_lo = 0;
+ 	sprom->boardflags_hi = 0;
+ 
+ 	/* First fetch the MAC address. */
+-	memset(&tuple, 0, sizeof(tuple));
+-	tuple.DesiredTuple = CISTPL_FUNCE;
+-	tuple.TupleData = buf;
+-	tuple.TupleDataMax = sizeof(buf);
+-	res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple);
+-	GOTO_ERROR_ON(res != 0, "MAC first tpl");
+-	res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
+-	GOTO_ERROR_ON(res != 0, "MAC first tpl data");
+-	while (1) {
+-		GOTO_ERROR_ON(tuple.TupleDataLen < 1, "MAC tpl < 1");
+-		if (tuple.TupleData[0] == CISTPL_FUNCE_LAN_NODE_ID)
+-			break;
+-		res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple);
+-		GOTO_ERROR_ON(res != 0, "MAC next tpl");
+-		res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
+-		GOTO_ERROR_ON(res != 0, "MAC next tpl data");
++	res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE,
++				ssb_pcmcia_get_mac, sprom);
++	if (res != 0) {
++		ssb_printk(KERN_ERR PFX
++			"PCMCIA: Failed to fetch MAC address\n");
++		return -ENODEV;
+ 	}
+-	GOTO_ERROR_ON(tuple.TupleDataLen != ETH_ALEN + 2, "MAC tpl size");
+-	memcpy(sprom->il0mac, &tuple.TupleData[2], ETH_ALEN);
+ 
+ 	/* Fetch the vendor specific tuples. */
+-	memset(&tuple, 0, sizeof(tuple));
+-	tuple.DesiredTuple = SSB_PCMCIA_CIS;
+-	tuple.TupleData = buf;
+-	tuple.TupleDataMax = sizeof(buf);
+-	res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple);
+-	GOTO_ERROR_ON(res != 0, "VEN first tpl");
+-	res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
+-	GOTO_ERROR_ON(res != 0, "VEN first tpl data");
+-	while (1) {
+-		GOTO_ERROR_ON(tuple.TupleDataLen < 1, "VEN tpl < 1");
+-		switch (tuple.TupleData[0]) {
+-		case SSB_PCMCIA_CIS_ID:
+-			GOTO_ERROR_ON((tuple.TupleDataLen != 5) &&
+-				      (tuple.TupleDataLen != 7),
+-				      "id tpl size");
+-			bi->vendor = tuple.TupleData[1] |
+-			       ((u16)tuple.TupleData[2] << 8);
+-			break;
+-		case SSB_PCMCIA_CIS_BOARDREV:
+-			GOTO_ERROR_ON(tuple.TupleDataLen != 2,
+-				      "boardrev tpl size");
+-			sprom->board_rev = tuple.TupleData[1];
+-			break;
+-		case SSB_PCMCIA_CIS_PA:
+-			GOTO_ERROR_ON((tuple.TupleDataLen != 9) &&
+-				      (tuple.TupleDataLen != 10),
+-				      "pa tpl size");
+-			sprom->pa0b0 = tuple.TupleData[1] |
+-				 ((u16)tuple.TupleData[2] << 8);
+-			sprom->pa0b1 = tuple.TupleData[3] |
+-				 ((u16)tuple.TupleData[4] << 8);
+-			sprom->pa0b2 = tuple.TupleData[5] |
+-				 ((u16)tuple.TupleData[6] << 8);
+-			sprom->itssi_a = tuple.TupleData[7];
+-			sprom->itssi_bg = tuple.TupleData[7];
+-			sprom->maxpwr_a = tuple.TupleData[8];
+-			sprom->maxpwr_bg = tuple.TupleData[8];
+-			break;
+-		case SSB_PCMCIA_CIS_OEMNAME:
+-			/* We ignore this. */
+-			break;
+-		case SSB_PCMCIA_CIS_CCODE:
+-			GOTO_ERROR_ON(tuple.TupleDataLen != 2,
+-				      "ccode tpl size");
+-			sprom->country_code = tuple.TupleData[1];
+-			break;
+-		case SSB_PCMCIA_CIS_ANTENNA:
+-			GOTO_ERROR_ON(tuple.TupleDataLen != 2,
+-				      "ant tpl size");
+-			sprom->ant_available_a = tuple.TupleData[1];
+-			sprom->ant_available_bg = tuple.TupleData[1];
+-			break;
+-		case SSB_PCMCIA_CIS_ANTGAIN:
+-			GOTO_ERROR_ON(tuple.TupleDataLen != 2,
+-				      "antg tpl size");
+-			sprom->antenna_gain.ghz24.a0 = tuple.TupleData[1];
+-			sprom->antenna_gain.ghz24.a1 = tuple.TupleData[1];
+-			sprom->antenna_gain.ghz24.a2 = tuple.TupleData[1];
+-			sprom->antenna_gain.ghz24.a3 = tuple.TupleData[1];
+-			sprom->antenna_gain.ghz5.a0 = tuple.TupleData[1];
+-			sprom->antenna_gain.ghz5.a1 = tuple.TupleData[1];
+-			sprom->antenna_gain.ghz5.a2 = tuple.TupleData[1];
+-			sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1];
+-			break;
+-		case SSB_PCMCIA_CIS_BFLAGS:
+-			GOTO_ERROR_ON((tuple.TupleDataLen != 3) &&
+-				      (tuple.TupleDataLen != 5),
+-				      "bfl tpl size");
+-			sprom->boardflags_lo = tuple.TupleData[1] |
+-					 ((u16)tuple.TupleData[2] << 8);
+-			break;
+-		case SSB_PCMCIA_CIS_LEDS:
+-			GOTO_ERROR_ON(tuple.TupleDataLen != 5,
+-				      "leds tpl size");
+-			sprom->gpio0 = tuple.TupleData[1];
+-			sprom->gpio1 = tuple.TupleData[2];
+-			sprom->gpio2 = tuple.TupleData[3];
+-			sprom->gpio3 = tuple.TupleData[4];
+-			break;
+-		}
+-		res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple);
+-		if (res == -ENOSPC)
+-			break;
+-		GOTO_ERROR_ON(res != 0, "VEN next tpl");
+-		res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
+-		GOTO_ERROR_ON(res != 0, "VEN next tpl data");
+-	}
++	res = pcmcia_loop_tuple(bus->host_pcmcia, SSB_PCMCIA_CIS,
++				ssb_pcmcia_do_get_invariants, sprom);
++	if ((res == 0) || (res == -ENOSPC))
++		return 0;
+ 
+-	return 0;
+-error:
+ 	ssb_printk(KERN_ERR PFX
+-		   "PCMCIA: Failed to fetch device invariants: %s\n",
+-		   error_description);
++			"PCMCIA: Failed to fetch device invariants\n");
+ 	return -ENODEV;
+ }
+ 
+--- a/drivers/ssb/scan.c
++++ b/drivers/ssb/scan.c
+@@ -354,7 +354,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ 		dev->bus = bus;
+ 		dev->ops = bus->ops;
+ 
+-		ssb_dprintk(KERN_INFO PFX
++		printk(KERN_DEBUG PFX
+ 			    "Core %d found: %s "
+ 			    "(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n",
+ 			    i, ssb_core_name(dev->id.coreid),
+--- a/drivers/ssb/sprom.c
++++ b/drivers/ssb/sprom.c
+@@ -14,6 +14,7 @@
+ #include "ssb_private.h"
+ 
+ #include <linux/ctype.h>
++#include <linux/slab.h>
+ 
+ 
+ static const struct ssb_sprom *fallback_sprom;
+@@ -102,6 +103,7 @@ ssize_t ssb_attr_sprom_store(struct ssb_
+ 	u16 *sprom;
+ 	int res = 0, err = -ENOMEM;
+ 	size_t sprom_size_words = bus->sprom_size;
++	struct ssb_freeze_context freeze;
+ 
+ 	sprom = kcalloc(bus->sprom_size, sizeof(u16), GFP_KERNEL);
+ 	if (!sprom)
+@@ -123,18 +125,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_
+ 	err = -ERESTARTSYS;
+ 	if (mutex_lock_interruptible(&bus->sprom_mutex))
+ 		goto out_kfree;
+-	err = ssb_devices_freeze(bus);
+-	if (err == -EOPNOTSUPP) {
+-		ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze devices. "
+-			   "No suspend support. Is CONFIG_PM enabled?\n");
+-		goto out_unlock;
+-	}
++	err = ssb_devices_freeze(bus, &freeze);
+ 	if (err) {
+ 		ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n");
+ 		goto out_unlock;
+ 	}
+ 	res = sprom_write(bus, sprom);
+-	err = ssb_devices_thaw(bus);
++	err = ssb_devices_thaw(&freeze);
+ 	if (err)
+ 		ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n");
+ out_unlock:
+@@ -179,3 +176,17 @@ const struct ssb_sprom *ssb_get_fallback
+ {
+ 	return fallback_sprom;
+ }
++
++/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
++bool ssb_is_sprom_available(struct ssb_bus *bus)
++{
++	/* status register only exists on chipcomon rev >= 11 and we need check
++	   for >= 31 only */
++	/* this routine differs from specs as we do not access SPROM directly
++	   on PCMCIA */
++	if (bus->bustype == SSB_BUSTYPE_PCI &&
++	    bus->chipco.dev->id.revision >= 31)
++		return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM;
++
++	return true;
++}
+--- a/drivers/ssb/ssb_private.h
++++ b/drivers/ssb/ssb_private.h
+@@ -176,19 +176,27 @@ extern const struct ssb_sprom *ssb_get_f
+ 
+ /* core.c */
+ extern u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m);
+-extern int ssb_devices_freeze(struct ssb_bus *bus);
+-extern int ssb_devices_thaw(struct ssb_bus *bus);
+ extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev);
+ int ssb_for_each_bus_call(unsigned long data,
+ 			  int (*func)(struct ssb_bus *bus, unsigned long data));
+ extern struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev);
+ 
++struct ssb_freeze_context {
++	/* Pointer to the bus */
++	struct ssb_bus *bus;
++	/* Boolean list to indicate whether a device is frozen on this bus. */
++	bool device_frozen[SSB_MAX_NR_CORES];
++};
++extern int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx);
++extern int ssb_devices_thaw(struct ssb_freeze_context *ctx);
++
++
+ 
+ /* b43_pci_bridge.c */
+ #ifdef CONFIG_SSB_B43_PCI_BRIDGE
+ extern int __init b43_pci_ssb_bridge_init(void);
+ extern void __exit b43_pci_ssb_bridge_exit(void);
+-#else /* CONFIG_SSB_B43_PCI_BRIDGR */
++#else /* CONFIG_SSB_B43_PCI_BRIDGE */
+ static inline int b43_pci_ssb_bridge_init(void)
+ {
+ 	return 0;
+@@ -196,6 +204,6 @@ static inline int b43_pci_ssb_bridge_ini
+ static inline void b43_pci_ssb_bridge_exit(void)
+ {
+ }
+-#endif /* CONFIG_SSB_PCIHOST */
++#endif /* CONFIG_SSB_B43_PCI_BRIDGE */
+ 
+ #endif /* LINUX_SSB_PRIVATE_H_ */
+--- a/include/linux/ssb/ssb.h
++++ b/include/linux/ssb/ssb.h
+@@ -269,7 +269,8 @@ struct ssb_bus {
+ 
+ 	const struct ssb_bus_ops *ops;
+ 
+-	/* The core in the basic address register window. (PCI bus only) */
++	/* The core currently mapped into the MMIO window.
++	 * Not valid on all host-buses. So don't use outside of SSB. */
+ 	struct ssb_device *mapped_device;
+ 	union {
+ 		/* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
+@@ -281,14 +282,17 @@ struct ssb_bus {
+ 	 * On PCMCIA-host busses this is used to protect the whole MMIO access. */
+ 	spinlock_t bar_lock;
+ 
+-	/* The bus this backplane is running on. */
++	/* The host-bus this backplane is running on. */
+ 	enum ssb_bustype bustype;
+-	/* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */
+-	struct pci_dev *host_pci;
+-	/* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
+-	struct pcmcia_device *host_pcmcia;
+-	/* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */
+-	struct sdio_func *host_sdio;
++	/* Pointers to the host-bus. Check bustype before using any of these pointers. */
++	union {
++		/* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */
++		struct pci_dev *host_pci;
++		/* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
++		struct pcmcia_device *host_pcmcia;
++		/* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */
++		struct sdio_func *host_sdio;
++	};
+ 
+ 	/* See enum ssb_quirks */
+ 	unsigned int quirks;
+@@ -301,6 +305,7 @@ struct ssb_bus {
+ 	/* ID information about the Chip. */
+ 	u16 chip_id;
+ 	u16 chip_rev;
++	u16 sprom_offset;
+ 	u16 sprom_size;		/* number of words in sprom */
+ 	u8 chip_package;
+ 
+@@ -390,6 +395,9 @@ extern int ssb_bus_sdiobus_register(stru
+ 
+ extern void ssb_bus_unregister(struct ssb_bus *bus);
+ 
++/* Does the device have an SPROM? */
++extern bool ssb_is_sprom_available(struct ssb_bus *bus);
++
+ /* Set a fallback SPROM.
+  * See kdoc at the function definition for complete documentation. */
+ extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
+--- a/include/linux/ssb/ssb_driver_chipcommon.h
++++ b/include/linux/ssb/ssb_driver_chipcommon.h
+@@ -53,6 +53,7 @@
+ #define  SSB_CHIPCO_CAP_64BIT		0x08000000	/* 64-bit Backplane */
+ #define  SSB_CHIPCO_CAP_PMU		0x10000000	/* PMU available (rev >= 20) */
+ #define  SSB_CHIPCO_CAP_ECI		0x20000000	/* ECI available (rev >= 20) */
++#define  SSB_CHIPCO_CAP_SPROM		0x40000000	/* SPROM present */
+ #define SSB_CHIPCO_CORECTL		0x0008
+ #define  SSB_CHIPCO_CORECTL_UARTCLK0	0x00000001	/* Drive UART with internal clock */
+ #define	 SSB_CHIPCO_CORECTL_SE		0x00000002	/* sync clk out enable (corerev >= 3) */
+@@ -385,6 +386,7 @@
+ 
+ 
+ /** Chip specific Chip-Status register contents. */
++#define SSB_CHIPCO_CHST_4322_SPROM_EXISTS	0x00000040 /* SPROM present */
+ #define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL	0x00000003
+ #define SSB_CHIPCO_CHST_4325_DEFCIS_SEL		0 /* OTP is powered up, use def. CIS, no SPROM */
+ #define SSB_CHIPCO_CHST_4325_SPROM_SEL		1 /* OTP is powered up, SPROM is present */
+@@ -398,6 +400,18 @@
+ #define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT	4
+ #define SSB_CHIPCO_CHST_4325_PMUTOP_2B 		0x00000200 /* 1 for 2b, 0 for to 2a */
+ 
++/** Macros to determine SPROM presence based on Chip-Status register. */
++#define SSB_CHIPCO_CHST_4312_SPROM_PRESENT(status) \
++	((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
++		SSB_CHIPCO_CHST_4325_OTP_SEL)
++#define SSB_CHIPCO_CHST_4322_SPROM_PRESENT(status) \
++	(status & SSB_CHIPCO_CHST_4322_SPROM_EXISTS)
++#define SSB_CHIPCO_CHST_4325_SPROM_PRESENT(status) \
++	(((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
++		SSB_CHIPCO_CHST_4325_DEFCIS_SEL) && \
++	 ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
++		SSB_CHIPCO_CHST_4325_OTP_SEL))
++
+ 
+ 
+ /** Clockcontrol masks and values **/
+@@ -564,6 +578,7 @@ struct ssb_chipcommon_pmu {
+ struct ssb_chipcommon {
+ 	struct ssb_device *dev;
+ 	u32 capabilities;
++	u32 status;
+ 	/* Fast Powerup Delay constant */
+ 	u16 fast_pwrup_delay;
+ 	struct ssb_chipcommon_pmu pmu;
+--- a/include/linux/ssb/ssb_regs.h
++++ b/include/linux/ssb/ssb_regs.h
+@@ -170,26 +170,27 @@
+ #define SSB_SPROMSIZE_WORDS_R4		220
+ #define SSB_SPROMSIZE_BYTES_R123	(SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
+ #define SSB_SPROMSIZE_BYTES_R4		(SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
+-#define SSB_SPROM_BASE			0x1000
+-#define SSB_SPROM_REVISION		0x107E
++#define SSB_SPROM_BASE1			0x1000
++#define SSB_SPROM_BASE31		0x0800
++#define SSB_SPROM_REVISION		0x007E
+ #define  SSB_SPROM_REVISION_REV		0x00FF	/* SPROM Revision number */
+ #define  SSB_SPROM_REVISION_CRC		0xFF00	/* SPROM CRC8 value */
+ #define  SSB_SPROM_REVISION_CRC_SHIFT	8
+ 
+ /* SPROM Revision 1 */
+-#define SSB_SPROM1_SPID			0x1004	/* Subsystem Product ID for PCI */
+-#define SSB_SPROM1_SVID			0x1006	/* Subsystem Vendor ID for PCI */
+-#define SSB_SPROM1_PID			0x1008	/* Product ID for PCI */
+-#define SSB_SPROM1_IL0MAC		0x1048	/* 6 bytes MAC address for 802.11b/g */
+-#define SSB_SPROM1_ET0MAC		0x104E	/* 6 bytes MAC address for Ethernet */
+-#define SSB_SPROM1_ET1MAC		0x1054	/* 6 bytes MAC address for 802.11a */
+-#define SSB_SPROM1_ETHPHY		0x105A	/* Ethernet PHY settings */
++#define SSB_SPROM1_SPID			0x0004	/* Subsystem Product ID for PCI */
++#define SSB_SPROM1_SVID			0x0006	/* Subsystem Vendor ID for PCI */
++#define SSB_SPROM1_PID			0x0008	/* Product ID for PCI */
++#define SSB_SPROM1_IL0MAC		0x0048	/* 6 bytes MAC address for 802.11b/g */
++#define SSB_SPROM1_ET0MAC		0x004E	/* 6 bytes MAC address for Ethernet */
++#define SSB_SPROM1_ET1MAC		0x0054	/* 6 bytes MAC address for 802.11a */
++#define SSB_SPROM1_ETHPHY		0x005A	/* Ethernet PHY settings */
+ #define  SSB_SPROM1_ETHPHY_ET0A		0x001F	/* MII Address for enet0 */
+ #define  SSB_SPROM1_ETHPHY_ET1A		0x03E0	/* MII Address for enet1 */
+ #define  SSB_SPROM1_ETHPHY_ET1A_SHIFT	5
+ #define  SSB_SPROM1_ETHPHY_ET0M		(1<<14)	/* MDIO for enet0 */
+ #define  SSB_SPROM1_ETHPHY_ET1M		(1<<15)	/* MDIO for enet1 */
+-#define SSB_SPROM1_BINF			0x105C	/* Board info */
++#define SSB_SPROM1_BINF			0x005C	/* Board info */
+ #define  SSB_SPROM1_BINF_BREV		0x00FF	/* Board Revision */
+ #define  SSB_SPROM1_BINF_CCODE		0x0F00	/* Country Code */
+ #define  SSB_SPROM1_BINF_CCODE_SHIFT	8
+@@ -197,63 +198,63 @@
+ #define  SSB_SPROM1_BINF_ANTBG_SHIFT	12
+ #define  SSB_SPROM1_BINF_ANTA		0xC000	/* Available A-PHY antennas */
+ #define  SSB_SPROM1_BINF_ANTA_SHIFT	14
+-#define SSB_SPROM1_PA0B0		0x105E
+-#define SSB_SPROM1_PA0B1		0x1060
+-#define SSB_SPROM1_PA0B2		0x1062
+-#define SSB_SPROM1_GPIOA		0x1064	/* General Purpose IO pins 0 and 1 */
++#define SSB_SPROM1_PA0B0		0x005E
++#define SSB_SPROM1_PA0B1		0x0060
++#define SSB_SPROM1_PA0B2		0x0062
++#define SSB_SPROM1_GPIOA		0x0064	/* General Purpose IO pins 0 and 1 */
+ #define  SSB_SPROM1_GPIOA_P0		0x00FF	/* Pin 0 */
+ #define  SSB_SPROM1_GPIOA_P1		0xFF00	/* Pin 1 */
+ #define  SSB_SPROM1_GPIOA_P1_SHIFT	8
+-#define SSB_SPROM1_GPIOB		0x1066	/* General Purpuse IO pins 2 and 3 */
++#define SSB_SPROM1_GPIOB		0x0066	/* General Purpuse IO pins 2 and 3 */
+ #define  SSB_SPROM1_GPIOB_P2		0x00FF	/* Pin 2 */
+ #define  SSB_SPROM1_GPIOB_P3		0xFF00	/* Pin 3 */
+ #define  SSB_SPROM1_GPIOB_P3_SHIFT	8
+-#define SSB_SPROM1_MAXPWR		0x1068	/* Power Amplifier Max Power */
++#define SSB_SPROM1_MAXPWR		0x0068	/* Power Amplifier Max Power */
+ #define  SSB_SPROM1_MAXPWR_BG		0x00FF	/* B-PHY and G-PHY (in dBm Q5.2) */
+ #define  SSB_SPROM1_MAXPWR_A		0xFF00	/* A-PHY (in dBm Q5.2) */
+ #define  SSB_SPROM1_MAXPWR_A_SHIFT	8
+-#define SSB_SPROM1_PA1B0		0x106A
+-#define SSB_SPROM1_PA1B1		0x106C
+-#define SSB_SPROM1_PA1B2		0x106E
+-#define SSB_SPROM1_ITSSI		0x1070	/* Idle TSSI Target */
++#define SSB_SPROM1_PA1B0		0x006A
++#define SSB_SPROM1_PA1B1		0x006C
++#define SSB_SPROM1_PA1B2		0x006E
++#define SSB_SPROM1_ITSSI		0x0070	/* Idle TSSI Target */
+ #define  SSB_SPROM1_ITSSI_BG		0x00FF	/* B-PHY and G-PHY*/
+ #define  SSB_SPROM1_ITSSI_A		0xFF00	/* A-PHY */
+ #define  SSB_SPROM1_ITSSI_A_SHIFT	8
+-#define SSB_SPROM1_BFLLO		0x1072	/* Boardflags (low 16 bits) */
+-#define SSB_SPROM1_AGAIN		0x1074	/* Antenna Gain (in dBm Q5.2) */
++#define SSB_SPROM1_BFLLO		0x0072	/* Boardflags (low 16 bits) */
++#define SSB_SPROM1_AGAIN		0x0074	/* Antenna Gain (in dBm Q5.2) */
+ #define  SSB_SPROM1_AGAIN_BG		0x00FF	/* B-PHY and G-PHY */
+ #define  SSB_SPROM1_AGAIN_BG_SHIFT	0
+ #define  SSB_SPROM1_AGAIN_A		0xFF00	/* A-PHY */
+ #define  SSB_SPROM1_AGAIN_A_SHIFT	8
+ 
+ /* SPROM Revision 2 (inherits from rev 1) */
+-#define SSB_SPROM2_BFLHI		0x1038	/* Boardflags (high 16 bits) */
+-#define SSB_SPROM2_MAXP_A		0x103A	/* A-PHY Max Power */
++#define SSB_SPROM2_BFLHI		0x0038	/* Boardflags (high 16 bits) */
++#define SSB_SPROM2_MAXP_A		0x003A	/* A-PHY Max Power */
+ #define  SSB_SPROM2_MAXP_A_HI		0x00FF	/* Max Power High */
+ #define  SSB_SPROM2_MAXP_A_LO		0xFF00	/* Max Power Low */
+ #define  SSB_SPROM2_MAXP_A_LO_SHIFT	8
+-#define SSB_SPROM2_PA1LOB0		0x103C	/* A-PHY PowerAmplifier Low Settings */
+-#define SSB_SPROM2_PA1LOB1		0x103E	/* A-PHY PowerAmplifier Low Settings */
+-#define SSB_SPROM2_PA1LOB2		0x1040	/* A-PHY PowerAmplifier Low Settings */
+-#define SSB_SPROM2_PA1HIB0		0x1042	/* A-PHY PowerAmplifier High Settings */
+-#define SSB_SPROM2_PA1HIB1		0x1044	/* A-PHY PowerAmplifier High Settings */
+-#define SSB_SPROM2_PA1HIB2		0x1046	/* A-PHY PowerAmplifier High Settings */
+-#define SSB_SPROM2_OPO			0x1078	/* OFDM Power Offset from CCK Level */
++#define SSB_SPROM2_PA1LOB0		0x003C	/* A-PHY PowerAmplifier Low Settings */
++#define SSB_SPROM2_PA1LOB1		0x003E	/* A-PHY PowerAmplifier Low Settings */
++#define SSB_SPROM2_PA1LOB2		0x0040	/* A-PHY PowerAmplifier Low Settings */
++#define SSB_SPROM2_PA1HIB0		0x0042	/* A-PHY PowerAmplifier High Settings */
++#define SSB_SPROM2_PA1HIB1		0x0044	/* A-PHY PowerAmplifier High Settings */
++#define SSB_SPROM2_PA1HIB2		0x0046	/* A-PHY PowerAmplifier High Settings */
++#define SSB_SPROM2_OPO			0x0078	/* OFDM Power Offset from CCK Level */
+ #define  SSB_SPROM2_OPO_VALUE		0x00FF
+ #define  SSB_SPROM2_OPO_UNUSED		0xFF00
+-#define SSB_SPROM2_CCODE		0x107C	/* Two char Country Code */
++#define SSB_SPROM2_CCODE		0x007C	/* Two char Country Code */
+ 
+ /* SPROM Revision 3 (inherits most data from rev 2) */
+-#define SSB_SPROM3_IL0MAC		0x104A	/* 6 bytes MAC address for 802.11b/g */
+-#define SSB_SPROM3_OFDMAPO		0x102C	/* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
+-#define SSB_SPROM3_OFDMALPO		0x1030	/* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
+-#define SSB_SPROM3_OFDMAHPO		0x1034	/* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
+-#define SSB_SPROM3_GPIOLDC		0x1042	/* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
++#define SSB_SPROM3_OFDMAPO		0x002C	/* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
++#define SSB_SPROM3_OFDMALPO		0x0030	/* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
++#define SSB_SPROM3_OFDMAHPO		0x0034	/* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
++#define SSB_SPROM3_GPIOLDC		0x0042	/* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
+ #define  SSB_SPROM3_GPIOLDC_OFF		0x0000FF00	/* Off Count */
+ #define  SSB_SPROM3_GPIOLDC_OFF_SHIFT	8
+ #define  SSB_SPROM3_GPIOLDC_ON		0x00FF0000	/* On Count */
+ #define  SSB_SPROM3_GPIOLDC_ON_SHIFT	16
+-#define SSB_SPROM3_CCKPO		0x1078	/* CCK Power Offset */
++#define SSB_SPROM3_IL0MAC		0x004A	/* 6 bytes MAC address for 802.11b/g */
++#define SSB_SPROM3_CCKPO		0x0078	/* CCK Power Offset */
+ #define  SSB_SPROM3_CCKPO_1M		0x000F	/* 1M Rate PO */
+ #define  SSB_SPROM3_CCKPO_2M		0x00F0	/* 2M Rate PO */
+ #define  SSB_SPROM3_CCKPO_2M_SHIFT	4
+@@ -264,100 +265,100 @@
+ #define  SSB_SPROM3_OFDMGPO		0x107A	/* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
+ 
+ /* SPROM Revision 4 */
+-#define SSB_SPROM4_IL0MAC		0x104C	/* 6 byte MAC address for a/b/g/n */
+-#define SSB_SPROM4_ETHPHY		0x105A	/* Ethernet PHY settings ?? */
++#define SSB_SPROM4_BFLLO		0x0044	/* Boardflags (low 16 bits) */
++#define SSB_SPROM4_BFLHI		0x0046  /* Board Flags Hi */
++#define SSB_SPROM4_IL0MAC		0x004C	/* 6 byte MAC address for a/b/g/n */
++#define SSB_SPROM4_CCODE		0x0052	/* Country Code (2 bytes) */
++#define SSB_SPROM4_GPIOA		0x0056	/* Gen. Purpose IO # 0 and 1 */
++#define  SSB_SPROM4_GPIOA_P0		0x00FF	/* Pin 0 */
++#define  SSB_SPROM4_GPIOA_P1		0xFF00	/* Pin 1 */
++#define  SSB_SPROM4_GPIOA_P1_SHIFT	8
++#define SSB_SPROM4_GPIOB		0x0058	/* Gen. Purpose IO # 2 and 3 */
++#define  SSB_SPROM4_GPIOB_P2		0x00FF	/* Pin 2 */
++#define  SSB_SPROM4_GPIOB_P3		0xFF00	/* Pin 3 */
++#define  SSB_SPROM4_GPIOB_P3_SHIFT	8
++#define SSB_SPROM4_ETHPHY		0x005A	/* Ethernet PHY settings ?? */
+ #define  SSB_SPROM4_ETHPHY_ET0A		0x001F	/* MII Address for enet0 */
+ #define  SSB_SPROM4_ETHPHY_ET1A		0x03E0	/* MII Address for enet1 */
+ #define  SSB_SPROM4_ETHPHY_ET1A_SHIFT	5
+ #define  SSB_SPROM4_ETHPHY_ET0M		(1<<14)	/* MDIO for enet0 */
+ #define  SSB_SPROM4_ETHPHY_ET1M		(1<<15)	/* MDIO for enet1 */
+-#define SSB_SPROM4_CCODE		0x1052	/* Country Code (2 bytes) */
+-#define SSB_SPROM4_ANTAVAIL		0x105D  /* Antenna available bitfields */
+-#define SSB_SPROM4_ANTAVAIL_A		0x00FF	/* A-PHY bitfield */
+-#define SSB_SPROM4_ANTAVAIL_A_SHIFT	0
+-#define SSB_SPROM4_ANTAVAIL_BG		0xFF00	/* B-PHY and G-PHY bitfield */
+-#define SSB_SPROM4_ANTAVAIL_BG_SHIFT	8
+-#define SSB_SPROM4_BFLLO		0x1044	/* Boardflags (low 16 bits) */
+-#define SSB_SPROM4_AGAIN01		0x105E	/* Antenna Gain (in dBm Q5.2) */
++#define SSB_SPROM4_ANTAVAIL		0x005D  /* Antenna available bitfields */
++#define  SSB_SPROM4_ANTAVAIL_A		0x00FF	/* A-PHY bitfield */
++#define  SSB_SPROM4_ANTAVAIL_A_SHIFT	0
++#define  SSB_SPROM4_ANTAVAIL_BG		0xFF00	/* B-PHY and G-PHY bitfield */
++#define  SSB_SPROM4_ANTAVAIL_BG_SHIFT	8
++#define SSB_SPROM4_AGAIN01		0x005E	/* Antenna Gain (in dBm Q5.2) */
+ #define  SSB_SPROM4_AGAIN0		0x00FF	/* Antenna 0 */
+ #define  SSB_SPROM4_AGAIN0_SHIFT	0
+ #define  SSB_SPROM4_AGAIN1		0xFF00	/* Antenna 1 */
+ #define  SSB_SPROM4_AGAIN1_SHIFT	8
+-#define SSB_SPROM4_AGAIN23		0x1060
++#define SSB_SPROM4_AGAIN23		0x0060
+ #define  SSB_SPROM4_AGAIN2		0x00FF	/* Antenna 2 */
+ #define  SSB_SPROM4_AGAIN2_SHIFT	0
+ #define  SSB_SPROM4_AGAIN3		0xFF00	/* Antenna 3 */
+ #define  SSB_SPROM4_AGAIN3_SHIFT	8
+-#define SSB_SPROM4_BFLHI		0x1046  /* Board Flags Hi */
+-#define SSB_SPROM4_MAXP_BG		0x1080  /* Max Power BG in path 1 */
++#define SSB_SPROM4_MAXP_BG		0x0080  /* Max Power BG in path 1 */
+ #define  SSB_SPROM4_MAXP_BG_MASK	0x00FF  /* Mask for Max Power BG */
+ #define  SSB_SPROM4_ITSSI_BG		0xFF00	/* Mask for path 1 itssi_bg */
+ #define  SSB_SPROM4_ITSSI_BG_SHIFT	8
+-#define SSB_SPROM4_MAXP_A		0x108A  /* Max Power A in path 1 */
++#define SSB_SPROM4_MAXP_A		0x008A  /* Max Power A in path 1 */
+ #define  SSB_SPROM4_MAXP_A_MASK		0x00FF  /* Mask for Max Power A */
+ #define  SSB_SPROM4_ITSSI_A		0xFF00	/* Mask for path 1 itssi_a */
+ #define  SSB_SPROM4_ITSSI_A_SHIFT	8
+-#define SSB_SPROM4_GPIOA		0x1056	/* Gen. Purpose IO # 0 and 1 */
+-#define  SSB_SPROM4_GPIOA_P0		0x00FF	/* Pin 0 */
+-#define  SSB_SPROM4_GPIOA_P1		0xFF00	/* Pin 1 */
+-#define  SSB_SPROM4_GPIOA_P1_SHIFT	8
+-#define SSB_SPROM4_GPIOB		0x1058	/* Gen. Purpose IO # 2 and 3 */
+-#define  SSB_SPROM4_GPIOB_P2		0x00FF	/* Pin 2 */
+-#define  SSB_SPROM4_GPIOB_P3		0xFF00	/* Pin 3 */
+-#define  SSB_SPROM4_GPIOB_P3_SHIFT	8
+-#define SSB_SPROM4_PA0B0		0x1082	/* The paXbY locations are */
+-#define SSB_SPROM4_PA0B1		0x1084	/*   only guesses */
+-#define SSB_SPROM4_PA0B2		0x1086
+-#define SSB_SPROM4_PA1B0		0x108E
+-#define SSB_SPROM4_PA1B1		0x1090
+-#define SSB_SPROM4_PA1B2		0x1092
++#define SSB_SPROM4_PA0B0		0x0082	/* The paXbY locations are */
++#define SSB_SPROM4_PA0B1		0x0084	/*   only guesses */
++#define SSB_SPROM4_PA0B2		0x0086
++#define SSB_SPROM4_PA1B0		0x008E
++#define SSB_SPROM4_PA1B1		0x0090
++#define SSB_SPROM4_PA1B2		0x0092
+ 
+ /* SPROM Revision 5 (inherits most data from rev 4) */
+-#define SSB_SPROM5_BFLLO		0x104A	/* Boardflags (low 16 bits) */
+-#define SSB_SPROM5_BFLHI		0x104C  /* Board Flags Hi */
+-#define SSB_SPROM5_IL0MAC		0x1052	/* 6 byte MAC address for a/b/g/n */
+-#define SSB_SPROM5_CCODE		0x1044	/* Country Code (2 bytes) */
+-#define SSB_SPROM5_GPIOA		0x1076	/* Gen. Purpose IO # 0 and 1 */
++#define SSB_SPROM5_CCODE		0x0044	/* Country Code (2 bytes) */
++#define SSB_SPROM5_BFLLO		0x004A	/* Boardflags (low 16 bits) */
++#define SSB_SPROM5_BFLHI		0x004C  /* Board Flags Hi */
++#define SSB_SPROM5_IL0MAC		0x0052	/* 6 byte MAC address for a/b/g/n */
++#define SSB_SPROM5_GPIOA		0x0076	/* Gen. Purpose IO # 0 and 1 */
+ #define  SSB_SPROM5_GPIOA_P0		0x00FF	/* Pin 0 */
+ #define  SSB_SPROM5_GPIOA_P1		0xFF00	/* Pin 1 */
+ #define  SSB_SPROM5_GPIOA_P1_SHIFT	8
+-#define SSB_SPROM5_GPIOB		0x1078	/* Gen. Purpose IO # 2 and 3 */
++#define SSB_SPROM5_GPIOB		0x0078	/* Gen. Purpose IO # 2 and 3 */
+ #define  SSB_SPROM5_GPIOB_P2		0x00FF	/* Pin 2 */
+ #define  SSB_SPROM5_GPIOB_P3		0xFF00	/* Pin 3 */
+ #define  SSB_SPROM5_GPIOB_P3_SHIFT	8
+ 
+ /* SPROM Revision 8 */
+-#define SSB_SPROM8_BOARDREV		0x1082	/* Board revision */
+-#define SSB_SPROM8_BFLLO		0x1084	/* Board flags (bits 0-15) */
+-#define SSB_SPROM8_BFLHI		0x1086	/* Board flags (bits 16-31) */
+-#define SSB_SPROM8_BFL2LO		0x1088	/* Board flags (bits 32-47) */
+-#define SSB_SPROM8_BFL2HI		0x108A	/* Board flags (bits 48-63) */
+-#define SSB_SPROM8_IL0MAC		0x108C	/* 6 byte MAC address */
+-#define SSB_SPROM8_CCODE		0x1092	/* 2 byte country code */
+-#define SSB_SPROM8_ANTAVAIL		0x109C  /* Antenna available bitfields*/
+-#define SSB_SPROM8_ANTAVAIL_A		0xFF00	/* A-PHY bitfield */
+-#define SSB_SPROM8_ANTAVAIL_A_SHIFT	8
+-#define SSB_SPROM8_ANTAVAIL_BG		0x00FF	/* B-PHY and G-PHY bitfield */
+-#define SSB_SPROM8_ANTAVAIL_BG_SHIFT	0
+-#define SSB_SPROM8_AGAIN01		0x109E	/* Antenna Gain (in dBm Q5.2) */
++#define SSB_SPROM8_BOARDREV		0x0082	/* Board revision */
++#define SSB_SPROM8_BFLLO		0x0084	/* Board flags (bits 0-15) */
++#define SSB_SPROM8_BFLHI		0x0086	/* Board flags (bits 16-31) */
++#define SSB_SPROM8_BFL2LO		0x0088	/* Board flags (bits 32-47) */
++#define SSB_SPROM8_BFL2HI		0x008A	/* Board flags (bits 48-63) */
++#define SSB_SPROM8_IL0MAC		0x008C	/* 6 byte MAC address */
++#define SSB_SPROM8_CCODE		0x0092	/* 2 byte country code */
++#define SSB_SPROM8_GPIOA		0x0096	/*Gen. Purpose IO # 0 and 1 */
++#define  SSB_SPROM8_GPIOA_P0		0x00FF	/* Pin 0 */
++#define  SSB_SPROM8_GPIOA_P1		0xFF00	/* Pin 1 */
++#define  SSB_SPROM8_GPIOA_P1_SHIFT	8
++#define SSB_SPROM8_GPIOB		0x0098	/* Gen. Purpose IO # 2 and 3 */
++#define  SSB_SPROM8_GPIOB_P2		0x00FF	/* Pin 2 */
++#define  SSB_SPROM8_GPIOB_P3		0xFF00	/* Pin 3 */
++#define  SSB_SPROM8_GPIOB_P3_SHIFT	8
++#define SSB_SPROM8_ANTAVAIL		0x009C  /* Antenna available bitfields*/
++#define  SSB_SPROM8_ANTAVAIL_A		0xFF00	/* A-PHY bitfield */
++#define  SSB_SPROM8_ANTAVAIL_A_SHIFT	8
++#define  SSB_SPROM8_ANTAVAIL_BG		0x00FF	/* B-PHY and G-PHY bitfield */
++#define  SSB_SPROM8_ANTAVAIL_BG_SHIFT	0
++#define SSB_SPROM8_AGAIN01		0x009E	/* Antenna Gain (in dBm Q5.2) */
+ #define  SSB_SPROM8_AGAIN0		0x00FF	/* Antenna 0 */
+ #define  SSB_SPROM8_AGAIN0_SHIFT	0
+ #define  SSB_SPROM8_AGAIN1		0xFF00	/* Antenna 1 */
+ #define  SSB_SPROM8_AGAIN1_SHIFT	8
+-#define SSB_SPROM8_AGAIN23		0x10A0
++#define SSB_SPROM8_AGAIN23		0x00A0
+ #define  SSB_SPROM8_AGAIN2		0x00FF	/* Antenna 2 */
+ #define  SSB_SPROM8_AGAIN2_SHIFT	0
+ #define  SSB_SPROM8_AGAIN3		0xFF00	/* Antenna 3 */
+ #define  SSB_SPROM8_AGAIN3_SHIFT	8
+-#define SSB_SPROM8_GPIOA		0x1096	/*Gen. Purpose IO # 0 and 1 */
+-#define  SSB_SPROM8_GPIOA_P0		0x00FF	/* Pin 0 */
+-#define  SSB_SPROM8_GPIOA_P1		0xFF00	/* Pin 1 */
+-#define  SSB_SPROM8_GPIOA_P1_SHIFT	8
+-#define SSB_SPROM8_GPIOB		0x1098	/* Gen. Purpose IO # 2 and 3 */
+-#define  SSB_SPROM8_GPIOB_P2		0x00FF	/* Pin 2 */
+-#define  SSB_SPROM8_GPIOB_P3		0xFF00	/* Pin 3 */
+-#define  SSB_SPROM8_GPIOB_P3_SHIFT	8
+-#define SSB_SPROM8_RSSIPARM2G		0x10A4	/* RSSI params for 2GHz */
++#define SSB_SPROM8_RSSIPARM2G		0x00A4	/* RSSI params for 2GHz */
+ #define  SSB_SPROM8_RSSISMF2G		0x000F
+ #define  SSB_SPROM8_RSSISMC2G		0x00F0
+ #define  SSB_SPROM8_RSSISMC2G_SHIFT	4
+@@ -365,7 +366,7 @@
+ #define  SSB_SPROM8_RSSISAV2G_SHIFT	8
+ #define  SSB_SPROM8_BXA2G		0x1800
+ #define  SSB_SPROM8_BXA2G_SHIFT		11
+-#define SSB_SPROM8_RSSIPARM5G		0x10A6	/* RSSI params for 5GHz */
++#define SSB_SPROM8_RSSIPARM5G		0x00A6	/* RSSI params for 5GHz */
+ #define  SSB_SPROM8_RSSISMF5G		0x000F
+ #define  SSB_SPROM8_RSSISMC5G		0x00F0
+ #define  SSB_SPROM8_RSSISMC5G_SHIFT	4
+@@ -373,47 +374,47 @@
+ #define  SSB_SPROM8_RSSISAV5G_SHIFT	8
+ #define  SSB_SPROM8_BXA5G		0x1800
+ #define  SSB_SPROM8_BXA5G_SHIFT		11
+-#define SSB_SPROM8_TRI25G		0x10A8	/* TX isolation 2.4&5.3GHz */
++#define SSB_SPROM8_TRI25G		0x00A8	/* TX isolation 2.4&5.3GHz */
+ #define  SSB_SPROM8_TRI2G		0x00FF	/* TX isolation 2.4GHz */
+ #define  SSB_SPROM8_TRI5G		0xFF00	/* TX isolation 5.3GHz */
+ #define  SSB_SPROM8_TRI5G_SHIFT		8
+-#define SSB_SPROM8_TRI5GHL		0x10AA	/* TX isolation 5.2/5.8GHz */
++#define SSB_SPROM8_TRI5GHL		0x00AA	/* TX isolation 5.2/5.8GHz */
+ #define  SSB_SPROM8_TRI5GL		0x00FF	/* TX isolation 5.2GHz */
+ #define  SSB_SPROM8_TRI5GH		0xFF00	/* TX isolation 5.8GHz */
+ #define  SSB_SPROM8_TRI5GH_SHIFT	8
+-#define SSB_SPROM8_RXPO			0x10AC  /* RX power offsets */
++#define SSB_SPROM8_RXPO			0x00AC  /* RX power offsets */
+ #define  SSB_SPROM8_RXPO2G		0x00FF	/* 2GHz RX power offset */
+ #define  SSB_SPROM8_RXPO5G		0xFF00	/* 5GHz RX power offset */
+ #define  SSB_SPROM8_RXPO5G_SHIFT	8
+-#define SSB_SPROM8_MAXP_BG		0x10C0  /* Max Power 2GHz in path 1 */
++#define SSB_SPROM8_MAXP_BG		0x00C0  /* Max Power 2GHz in path 1 */
+ #define  SSB_SPROM8_MAXP_BG_MASK	0x00FF  /* Mask for Max Power 2GHz */
+ #define  SSB_SPROM8_ITSSI_BG		0xFF00	/* Mask for path 1 itssi_bg */
+ #define  SSB_SPROM8_ITSSI_BG_SHIFT	8
+-#define SSB_SPROM8_PA0B0		0x10C2	/* 2GHz power amp settings */
+-#define SSB_SPROM8_PA0B1		0x10C4
+-#define SSB_SPROM8_PA0B2		0x10C6
+-#define SSB_SPROM8_MAXP_A		0x10C8  /* Max Power 5.3GHz */
++#define SSB_SPROM8_PA0B0		0x00C2	/* 2GHz power amp settings */
++#define SSB_SPROM8_PA0B1		0x00C4
++#define SSB_SPROM8_PA0B2		0x00C6
++#define SSB_SPROM8_MAXP_A		0x00C8  /* Max Power 5.3GHz */
+ #define  SSB_SPROM8_MAXP_A_MASK		0x00FF  /* Mask for Max Power 5.3GHz */
+ #define  SSB_SPROM8_ITSSI_A		0xFF00	/* Mask for path 1 itssi_a */
+ #define  SSB_SPROM8_ITSSI_A_SHIFT	8
+-#define SSB_SPROM8_MAXP_AHL		0x10CA  /* Max Power 5.2/5.8GHz */
++#define SSB_SPROM8_MAXP_AHL		0x00CA  /* Max Power 5.2/5.8GHz */
+ #define  SSB_SPROM8_MAXP_AH_MASK	0x00FF  /* Mask for Max Power 5.8GHz */
+ #define  SSB_SPROM8_MAXP_AL_MASK	0xFF00  /* Mask for Max Power 5.2GHz */
+ #define  SSB_SPROM8_MAXP_AL_SHIFT	8
+-#define SSB_SPROM8_PA1B0		0x10CC	/* 5.3GHz power amp settings */
+-#define SSB_SPROM8_PA1B1		0x10CE
+-#define SSB_SPROM8_PA1B2		0x10D0
+-#define SSB_SPROM8_PA1LOB0		0x10D2	/* 5.2GHz power amp settings */
+-#define SSB_SPROM8_PA1LOB1		0x10D4
+-#define SSB_SPROM8_PA1LOB2		0x10D6
+-#define SSB_SPROM8_PA1HIB0		0x10D8	/* 5.8GHz power amp settings */
+-#define SSB_SPROM8_PA1HIB1		0x10DA
+-#define SSB_SPROM8_PA1HIB2		0x10DC
+-#define SSB_SPROM8_CCK2GPO		0x1140	/* CCK power offset */
+-#define SSB_SPROM8_OFDM2GPO		0x1142	/* 2.4GHz OFDM power offset */
+-#define SSB_SPROM8_OFDM5GPO		0x1146	/* 5.3GHz OFDM power offset */
+-#define SSB_SPROM8_OFDM5GLPO		0x114A	/* 5.2GHz OFDM power offset */
+-#define SSB_SPROM8_OFDM5GHPO		0x114E	/* 5.8GHz OFDM power offset */
++#define SSB_SPROM8_PA1B0		0x00CC	/* 5.3GHz power amp settings */
++#define SSB_SPROM8_PA1B1		0x00CE
++#define SSB_SPROM8_PA1B2		0x00D0
++#define SSB_SPROM8_PA1LOB0		0x00D2	/* 5.2GHz power amp settings */
++#define SSB_SPROM8_PA1LOB1		0x00D4
++#define SSB_SPROM8_PA1LOB2		0x00D6
++#define SSB_SPROM8_PA1HIB0		0x00D8	/* 5.8GHz power amp settings */
++#define SSB_SPROM8_PA1HIB1		0x00DA
++#define SSB_SPROM8_PA1HIB2		0x00DC
++#define SSB_SPROM8_CCK2GPO		0x0140	/* CCK power offset */
++#define SSB_SPROM8_OFDM2GPO		0x0142	/* 2.4GHz OFDM power offset */
++#define SSB_SPROM8_OFDM5GPO		0x0146	/* 5.3GHz OFDM power offset */
++#define SSB_SPROM8_OFDM5GLPO		0x014A	/* 5.2GHz OFDM power offset */
++#define SSB_SPROM8_OFDM5GHPO		0x014E	/* 5.8GHz OFDM power offset */
+ 
+ /* Values for SSB_SPROM1_BINF_CCODE */
+ enum {
diff --git a/target/linux/generic/patches-2.6.32/976-ssb_add_dma_dev.patch b/target/linux/generic/patches-2.6.32/976-ssb_add_dma_dev.patch
new file mode 100644
index 0000000000..fd463b4a75
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/976-ssb_add_dma_dev.patch
@@ -0,0 +1,52 @@
+From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
+
+Add dma_dev, a pointer to struct device, to struct ssb_device.  We pass it
+to the generic DMA API with SSB_BUSTYPE_PCI and SSB_BUSTYPE_SSB. 
+ssb_devices_register() sets up it properly.
+
+This is preparation for replacing the ssb bus specific DMA API (ssb_dma_*)
+with the generic DMA API.
+
+Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
+Acked-by: Michael Buesch <mb@bu3sch.de>
+Cc: Gary Zambrano <zambrano@broadcom.com>
+Cc: Stefano Brivio <stefano.brivio@polimi.it>
+Cc: Larry Finger <Larry.Finger@lwfinger.net>
+Cc: John W. Linville <linville@tuxdriver.com>
+Acked-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
+---
+
+ drivers/ssb/main.c      |    2 ++
+ include/linux/ssb/ssb.h |    2 +-
+ 2 files changed, 3 insertions(+), 1 deletion(-)
+
+--- a/drivers/ssb/main.c
++++ b/drivers/ssb/main.c
+@@ -486,6 +486,7 @@ static int ssb_devices_register(struct s
+ #ifdef CONFIG_SSB_PCIHOST
+ 			sdev->irq = bus->host_pci->irq;
+ 			dev->parent = &bus->host_pci->dev;
++			sdev->dma_dev = dev->parent;
+ #endif
+ 			break;
+ 		case SSB_BUSTYPE_PCMCIA:
+@@ -501,6 +502,7 @@ static int ssb_devices_register(struct s
+ 			break;
+ 		case SSB_BUSTYPE_SSB:
+ 			dev->dma_mask = &dev->coherent_dma_mask;
++			sdev->dma_dev = dev;
+ 			break;
+ 		}
+ 
+--- a/include/linux/ssb/ssb.h
++++ b/include/linux/ssb/ssb.h
+@@ -167,7 +167,7 @@ struct ssb_device {
+ 	 * is an optimization. */
+ 	const struct ssb_bus_ops *ops;
+ 
+-	struct device *dev;
++	struct device *dev, *dma_dev;
+ 
+ 	struct ssb_bus *bus;
+ 	struct ssb_device_id id;
diff --git a/target/linux/generic/patches-2.6.32/977-textsearch_kconfig_hacks.patch b/target/linux/generic/patches-2.6.32/977-textsearch_kconfig_hacks.patch
new file mode 100644
index 0000000000..94d6b91d8a
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/977-textsearch_kconfig_hacks.patch
@@ -0,0 +1,23 @@
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -152,16 +152,16 @@ config REED_SOLOMON_DEC16
+ # Textsearch support is select'ed if needed
+ #
+ config TEXTSEARCH
+-	boolean
++	boolean	"Textsearch support"
+ 
+ config TEXTSEARCH_KMP
+-	tristate
++	tristate "Textsearch KMP"
+ 
+ config TEXTSEARCH_BM
+-	tristate
++	tristate "Textsearch BM"
+ 
+ config TEXTSEARCH_FSM
+-	tristate
++	tristate "Textsearch FSM"
+ 
+ config HAS_IOMEM
+ 	boolean
diff --git a/target/linux/generic/patches-2.6.32/978-lib80211_kconfig_hacks.patch b/target/linux/generic/patches-2.6.32/978-lib80211_kconfig_hacks.patch
new file mode 100644
index 0000000000..e0dc6365fe
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/978-lib80211_kconfig_hacks.patch
@@ -0,0 +1,19 @@
+--- a/net/wireless/Kconfig
++++ b/net/wireless/Kconfig
+@@ -127,13 +127,13 @@ config LIB80211
+ 	  you want this built into your kernel.
+ 
+ config LIB80211_CRYPT_WEP
+-	tristate
++	tristate "LIB80211_CRYPT_WEP"
+ 
+ config LIB80211_CRYPT_CCMP
+-	tristate
++	tristate "LIB80211_CRYPT_CCMP"
+ 
+ config LIB80211_CRYPT_TKIP
+-	tristate
++	tristate "LIB80211_CRYPT_TKIP"
+ 
+ config LIB80211_DEBUG
+ 	bool "lib80211 debugging messages"
diff --git a/target/linux/generic/patches-2.6.32/979-crypto_add_kconfig_prompts.patch b/target/linux/generic/patches-2.6.32/979-crypto_add_kconfig_prompts.patch
new file mode 100644
index 0000000000..b40b2cea96
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/979-crypto_add_kconfig_prompts.patch
@@ -0,0 +1,47 @@
+--- a/crypto/Kconfig
++++ b/crypto/Kconfig
+@@ -32,7 +32,7 @@ config CRYPTO_FIPS
+ 	  option is selected
+ 
+ config CRYPTO_ALGAPI
+-	tristate
++	tristate "ALGAPI"
+ 	select CRYPTO_ALGAPI2
+ 	help
+ 	  This option provides the API for cryptographic algorithms.
+@@ -41,7 +41,7 @@ config CRYPTO_ALGAPI2
+ 	tristate
+ 
+ config CRYPTO_AEAD
+-	tristate
++	tristate "AEAD"
+ 	select CRYPTO_AEAD2
+ 	select CRYPTO_ALGAPI
+ 
+@@ -50,7 +50,7 @@ config CRYPTO_AEAD2
+ 	select CRYPTO_ALGAPI2
+ 
+ config CRYPTO_BLKCIPHER
+-	tristate
++	tristate "BLKCIPHER"
+ 	select CRYPTO_BLKCIPHER2
+ 	select CRYPTO_ALGAPI
+ 
+@@ -61,7 +61,7 @@ config CRYPTO_BLKCIPHER2
+ 	select CRYPTO_WORKQUEUE
+ 
+ config CRYPTO_HASH
+-	tristate
++	tristate "HASH"
+ 	select CRYPTO_HASH2
+ 	select CRYPTO_ALGAPI
+ 
+@@ -70,7 +70,7 @@ config CRYPTO_HASH2
+ 	select CRYPTO_ALGAPI2
+ 
+ config CRYPTO_RNG
+-	tristate
++	tristate "RNG"
+ 	select CRYPTO_RNG2
+ 	select CRYPTO_ALGAPI
+ 
diff --git a/target/linux/generic/patches-2.6.32/980-vm_exports.patch b/target/linux/generic/patches-2.6.32/980-vm_exports.patch
new file mode 100644
index 0000000000..c226ac7bf1
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/980-vm_exports.patch
@@ -0,0 +1,134 @@
+--- a/mm/shmem.c
++++ b/mm/shmem.c
+@@ -2608,6 +2608,16 @@ int shmem_lock(struct file *file, int lo
+ 
+ /* common code */
+ 
++void shmem_set_file(struct vm_area_struct *vma, struct file *file)
++{
++	ima_counts_get(file);
++	if (vma->vm_file)
++		fput(vma->vm_file);
++	vma->vm_file = file;
++	vma->vm_ops = &shmem_vm_ops;
++}
++EXPORT_SYMBOL_GPL(shmem_set_file);
++
+ /**
+  * shmem_file_setup - get an unlinked file living in tmpfs
+  * @name: name for dentry (to be seen in /proc/<pid>/maps
+@@ -2687,9 +2697,6 @@ int shmem_zero_setup(struct vm_area_stru
+ 	if (IS_ERR(file))
+ 		return PTR_ERR(file);
+ 
+-	if (vma->vm_file)
+-		fput(vma->vm_file);
+-	vma->vm_file = file;
+-	vma->vm_ops = &shmem_vm_ops;
++	shmem_set_file(vma, file);
+ 	return 0;
+ }
+--- a/fs/file.c
++++ b/fs/file.c
+@@ -271,6 +271,7 @@ int expand_files(struct files_struct *fi
+ 	/* All good, so we try */
+ 	return expand_fdtable(files, nr);
+ }
++EXPORT_SYMBOL_GPL(expand_files);
+ 
+ static int count_open_files(struct fdtable *fdt)
+ {
+--- a/kernel/exit.c
++++ b/kernel/exit.c
+@@ -507,6 +507,7 @@ struct files_struct *get_files_struct(st
+ 
+ 	return files;
+ }
++EXPORT_SYMBOL_GPL(get_files_struct);
+ 
+ void put_files_struct(struct files_struct *files)
+ {
+@@ -526,6 +527,7 @@ void put_files_struct(struct files_struc
+ 		free_fdtable(fdt);
+ 	}
+ }
++EXPORT_SYMBOL_GPL(put_files_struct);
+ 
+ void reset_files_struct(struct files_struct *files)
+ {
+--- a/kernel/fork.c
++++ b/kernel/fork.c
+@@ -168,6 +168,7 @@ void __put_task_struct(struct task_struc
+ 	if (!profile_handoff_task(tsk))
+ 		free_task(tsk);
+ }
++EXPORT_SYMBOL_GPL(__put_task_struct);
+ 
+ /*
+  * macro override instead of weak attribute alias, to workaround
+--- a/kernel/sched.c
++++ b/kernel/sched.c
+@@ -6113,6 +6113,7 @@ int can_nice(const struct task_struct *p
+ 	return (nice_rlim <= p->signal->rlim[RLIMIT_NICE].rlim_cur ||
+ 		capable(CAP_SYS_NICE));
+ }
++EXPORT_SYMBOL_GPL(can_nice);
+ 
+ #ifdef __ARCH_WANT_SYS_NICE
+ 
+--- a/mm/memory.c
++++ b/mm/memory.c
+@@ -1100,6 +1100,7 @@ unsigned long zap_page_range(struct vm_a
+ 		tlb_finish_mmu(tlb, address, end);
+ 	return end;
+ }
++EXPORT_SYMBOL_GPL(zap_page_range);
+ 
+ /**
+  * zap_vma_ptes - remove ptes mapping the vma
+@@ -2486,6 +2487,7 @@ int vmtruncate_range(struct inode *inode
+ 
+ 	return 0;
+ }
++EXPORT_SYMBOL_GPL(vmtruncate_range);
+ 
+ /*
+  * We enter with non-exclusive mmap_sem (to exclude vma changes,
+--- a/mm/vmalloc.c
++++ b/mm/vmalloc.c
+@@ -1172,6 +1172,7 @@ void unmap_kernel_range(unsigned long ad
+ 	vunmap_page_range(addr, end);
+ 	flush_tlb_kernel_range(addr, end);
+ }
++EXPORT_SYMBOL_GPL(unmap_kernel_range);
+ 
+ int map_vm_area(struct vm_struct *area, pgprot_t prot, struct page ***pages)
+ {
+@@ -1287,6 +1288,7 @@ struct vm_struct *get_vm_area(unsigned l
+ 	return __get_vm_area_node(size, 1, flags, VMALLOC_START, VMALLOC_END,
+ 				-1, GFP_KERNEL, __builtin_return_address(0));
+ }
++EXPORT_SYMBOL_GPL(get_vm_area);
+ 
+ struct vm_struct *get_vm_area_caller(unsigned long size, unsigned long flags,
+ 				void *caller)
+--- a/include/linux/mm.h
++++ b/include/linux/mm.h
+@@ -713,6 +713,7 @@ extern void show_free_areas(void);
+ 
+ int shmem_lock(struct file *file, int lock, struct user_struct *user);
+ struct file *shmem_file_setup(const char *name, loff_t size, unsigned long flags);
++void shmem_set_file(struct vm_area_struct *vma, struct file *file);
+ int shmem_zero_setup(struct vm_area_struct *);
+ 
+ #ifndef CONFIG_MMU
+--- a/kernel/signal.c
++++ b/kernel/signal.c
+@@ -1070,6 +1070,7 @@ struct sighand_struct *lock_task_sighand
+ 
+ 	return sighand;
+ }
++EXPORT_SYMBOL(lock_task_sighand);
+ 
+ /*
+  * send signal info to all the members of a group
diff --git a/target/linux/generic/patches-2.6.32/985-cris-headers.patch b/target/linux/generic/patches-2.6.32/985-cris-headers.patch
new file mode 100644
index 0000000000..73ede933ba
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/985-cris-headers.patch
@@ -0,0 +1,27 @@
+--- a/arch/cris/include/arch-v10/arch/Kbuild
++++ b/arch/cris/include/arch-v10/arch/Kbuild
+@@ -1,3 +1,5 @@
++header-y += elf.h
++header-y += ptrace.h
+ header-y += user.h
+ header-y += svinto.h
+ header-y += sv_addr_ag.h
+--- a/arch/cris/include/asm/Kbuild
++++ b/arch/cris/include/asm/Kbuild
+@@ -1,11 +1,14 @@
+ include include/asm-generic/Kbuild.asm
+ 
+-header-y += arch-v10/
+-header-y += arch-v32/
++header-y += ../arch-v10/arch/
++header-y += ../arch-v32/arch/
+ 
++header-y += elf.h
+ header-y += ethernet.h
++header-y += page.h
+ header-y += rtc.h
+ header-y += sync_serial.h
++header-y += user.h
+ 
+ unifdef-y += etraxgpio.h
+ unifdef-y += rs485.h
diff --git a/target/linux/generic/patches-2.6.32/991-ppc4xx_optimization.patch b/target/linux/generic/patches-2.6.32/991-ppc4xx_optimization.patch
new file mode 100644
index 0000000000..0efb777809
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/991-ppc4xx_optimization.patch
@@ -0,0 +1,31 @@
+Upstream doesn't optimize the kernel and bootwrappers for ppc44x because
+they still want to support gcc 3.3 -- well, we don't.
+
+--- a/arch/powerpc/Makefile
++++ b/arch/powerpc/Makefile
+@@ -123,7 +123,8 @@ ifeq ($(CONFIG_FUNCTION_TRACER),y)
+ KBUILD_CFLAGS		+= -mno-sched-epilog
+ endif
+ 
+-cpu-as-$(CONFIG_4xx)		+= -Wa,-m405
++cpu-as-$(CONFIG_40x)		+= -Wa,-m405
++cpu-as-$(CONFIG_44x)		+= -Wa,-m440
+ cpu-as-$(CONFIG_6xx)		+= -Wa,-maltivec
+ cpu-as-$(CONFIG_POWER4)		+= -Wa,-maltivec
+ cpu-as-$(CONFIG_E500)		+= -Wa,-me500
+--- a/arch/powerpc/boot/Makefile
++++ b/arch/powerpc/boot/Makefile
+@@ -38,10 +38,10 @@ BOOTCFLAGS	+= -I$(obj) -I$(srctree)/$(ob
+ DTS_FLAGS	?= -p 1024
+ 
+ $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
+-$(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
++$(obj)/ebony.o: BOOTCFLAGS += -mcpu=440
+ $(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405
+-$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
+-$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
++$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=440
++$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440
+ $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
+ $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
+ $(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
diff --git a/target/linux/generic/patches-2.6.32/998-openwrt_lzma_options.patch b/target/linux/generic/patches-2.6.32/998-openwrt_lzma_options.patch
new file mode 100644
index 0000000000..face9154d8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/998-openwrt_lzma_options.patch
@@ -0,0 +1,54 @@
+--- a/scripts/Makefile.lib
++++ b/scripts/Makefile.lib
+@@ -228,7 +228,7 @@ cmd_bzip2 = (cat $(filter-out FORCE,$^) 
+ 
+ quiet_cmd_lzma = LZMA    $@
+ cmd_lzma = (cat $(filter-out FORCE,$^) | \
+-	lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
++	lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ 	(rm -f $@ ; false)
+ 
+ quiet_cmd_lzo = LZO    $@
+--- a/scripts/gen_initramfs_list.sh
++++ b/scripts/gen_initramfs_list.sh
+@@ -225,7 +225,7 @@ cpio_list=
+ output="/dev/stdout"
+ output_file=""
+ is_cpio_compressed=
+-compr="gzip -9 -f"
++compr="gzip -9 -f -"
+ 
+ arg="$1"
+ case "$arg" in
+@@ -239,9 +239,9 @@ case "$arg" in
+ 		output_file="$1"
+ 		cpio_list="$(mktemp ${TMPDIR:-/tmp}/cpiolist.XXXXXX)"
+ 		output=${cpio_list}
+-		echo "$output_file" | grep -q "\.gz$" && compr="gzip -9 -f"
+-		echo "$output_file" | grep -q "\.bz2$" && compr="bzip2 -9 -f"
+-		echo "$output_file" | grep -q "\.lzma$" && compr="lzma -9 -f"
++		echo "$output_file" | grep -q "\.gz$" && compr="gzip -9 -f -"
++		echo "$output_file" | grep -q "\.bz2$" && compr="bzip2 -9 -f -"
++		echo "$output_file" | grep -q "\.lzma$" && compr="lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so"
+ 		echo "$output_file" | grep -q "\.cpio$" && compr="cat"
+ 		shift
+ 		;;
+@@ -292,7 +292,7 @@ if [ ! -z ${output_file} ]; then
+ 	if [ "${is_cpio_compressed}" = "compressed" ]; then
+ 		cat ${cpio_tfile} > ${output_file}
+ 	else
+-		(cat ${cpio_tfile} | ${compr}  - > ${output_file}) \
++		(cat ${cpio_tfile} | ${compr} > ${output_file}) \
+ 		|| (rm -f ${output_file} ; false)
+ 	fi
+ 	[ -z ${cpio_file} ] && rm ${cpio_tfile}
+--- a/lib/decompress.c
++++ b/lib/decompress.c
+@@ -36,6 +36,7 @@ static const struct compress_format {
+ 	{ {037, 0236}, "gzip", gunzip },
+ 	{ {0x42, 0x5a}, "bzip2", bunzip2 },
+ 	{ {0x5d, 0x00}, "lzma", unlzma },
++	{ {0x6d, 0x00}, "lzma-openwrt", unlzma },
+ 	{ {0x89, 0x4c}, "lzo", unlzo },
+ 	{ {0, 0}, NULL, NULL }
+ };
diff --git a/target/linux/generic/patches-2.6.32/999-use_preinit_as_init.patch b/target/linux/generic/patches-2.6.32/999-use_preinit_as_init.patch
new file mode 100644
index 0000000000..c1f8ef075e
--- /dev/null
+++ b/target/linux/generic/patches-2.6.32/999-use_preinit_as_init.patch
@@ -0,0 +1,14 @@
+--- a/init/main.c
++++ b/init/main.c
+@@ -831,10 +831,7 @@ static noinline int init_post(void)
+ 		printk(KERN_WARNING "Failed to execute %s.  Attempting "
+ 					"defaults...\n", execute_command);
+ 	}
+-	run_init_process("/sbin/init");
+-	run_init_process("/etc/init");
+-	run_init_process("/bin/init");
+-	run_init_process("/bin/sh");
++	run_init_process("/etc/preinit");
+ 
+ 	panic("No init found.  Try passing init= option to kernel.");
+ }
diff --git a/target/linux/generic/patches-2.6.33/001-squashfs_move_zlib_decomp.patch b/target/linux/generic/patches-2.6.33/001-squashfs_move_zlib_decomp.patch
new file mode 100644
index 0000000000..94096791f1
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/001-squashfs_move_zlib_decomp.patch
@@ -0,0 +1,244 @@
+From 6c4419d997d4431bb62e73475cd6b084e83efbd1 Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Tue, 22 Sep 2009 19:25:24 +0100
+Subject: [PATCH] Squashfs: move zlib decompression wrapper code into a separate file
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/Makefile       |    2 +-
+ fs/squashfs/block.c        |   74 ++----------------------------
+ fs/squashfs/squashfs.h     |    4 ++
+ fs/squashfs/zlib_wrapper.c |  109 ++++++++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 118 insertions(+), 71 deletions(-)
+ create mode 100644 fs/squashfs/zlib_wrapper.c
+
+--- a/fs/squashfs/Makefile
++++ b/fs/squashfs/Makefile
+@@ -4,4 +4,4 @@
+ 
+ obj-$(CONFIG_SQUASHFS) += squashfs.o
+ squashfs-y += block.o cache.o dir.o export.o file.o fragment.o id.o inode.o
+-squashfs-y += namei.o super.o symlink.o
++squashfs-y += namei.o super.o symlink.o zlib_wrapper.o
+--- a/fs/squashfs/block.c
++++ b/fs/squashfs/block.c
+@@ -29,7 +29,6 @@
+ #include <linux/fs.h>
+ #include <linux/vfs.h>
+ #include <linux/slab.h>
+-#include <linux/mutex.h>
+ #include <linux/string.h>
+ #include <linux/buffer_head.h>
+ #include <linux/zlib.h>
+@@ -153,72 +152,10 @@ int squashfs_read_data(struct super_bloc
+ 	}
+ 
+ 	if (compressed) {
+-		int zlib_err = 0, zlib_init = 0;
+-
+-		/*
+-		 * Uncompress block.
+-		 */
+-
+-		mutex_lock(&msblk->read_data_mutex);
+-
+-		msblk->stream.avail_out = 0;
+-		msblk->stream.avail_in = 0;
+-
+-		bytes = length;
+-		do {
+-			if (msblk->stream.avail_in == 0 && k < b) {
+-				avail = min(bytes, msblk->devblksize - offset);
+-				bytes -= avail;
+-				wait_on_buffer(bh[k]);
+-				if (!buffer_uptodate(bh[k]))
+-					goto release_mutex;
+-
+-				if (avail == 0) {
+-					offset = 0;
+-					put_bh(bh[k++]);
+-					continue;
+-				}
+-
+-				msblk->stream.next_in = bh[k]->b_data + offset;
+-				msblk->stream.avail_in = avail;
+-				offset = 0;
+-			}
+-
+-			if (msblk->stream.avail_out == 0 && page < pages) {
+-				msblk->stream.next_out = buffer[page++];
+-				msblk->stream.avail_out = PAGE_CACHE_SIZE;
+-			}
+-
+-			if (!zlib_init) {
+-				zlib_err = zlib_inflateInit(&msblk->stream);
+-				if (zlib_err != Z_OK) {
+-					ERROR("zlib_inflateInit returned"
+-						" unexpected result 0x%x,"
+-						" srclength %d\n", zlib_err,
+-						srclength);
+-					goto release_mutex;
+-				}
+-				zlib_init = 1;
+-			}
+-
+-			zlib_err = zlib_inflate(&msblk->stream, Z_SYNC_FLUSH);
+-
+-			if (msblk->stream.avail_in == 0 && k < b)
+-				put_bh(bh[k++]);
+-		} while (zlib_err == Z_OK);
+-
+-		if (zlib_err != Z_STREAM_END) {
+-			ERROR("zlib_inflate error, data probably corrupt\n");
+-			goto release_mutex;
+-		}
+-
+-		zlib_err = zlib_inflateEnd(&msblk->stream);
+-		if (zlib_err != Z_OK) {
+-			ERROR("zlib_inflate error, data probably corrupt\n");
+-			goto release_mutex;
+-		}
+-		length = msblk->stream.total_out;
+-		mutex_unlock(&msblk->read_data_mutex);
++		length = zlib_uncompress(msblk, buffer, bh, b, offset, length,
++			srclength, pages);
++		if (length < 0)
++			goto read_failure;
+ 	} else {
+ 		/*
+ 		 * Block is uncompressed.
+@@ -255,9 +192,6 @@ int squashfs_read_data(struct super_bloc
+ 	kfree(bh);
+ 	return length;
+ 
+-release_mutex:
+-	mutex_unlock(&msblk->read_data_mutex);
+-
+ block_release:
+ 	for (; k < b; k++)
+ 		put_bh(bh[k]);
+--- a/fs/squashfs/squashfs.h
++++ b/fs/squashfs/squashfs.h
+@@ -70,6 +70,10 @@ extern struct inode *squashfs_iget(struc
+ 				unsigned int);
+ extern int squashfs_read_inode(struct inode *, long long);
+ 
++/* zlib_wrapper.c */
++extern int zlib_uncompress(struct squashfs_sb_info *, void **,
++				struct buffer_head **, int, int, int, int, int);
++
+ /*
+  * Inodes and files operations
+  */
+--- /dev/null
++++ b/fs/squashfs/zlib_wrapper.c
+@@ -0,0 +1,109 @@
++/*
++ * Squashfs - a compressed read only filesystem for Linux
++ *
++ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
++ * Phillip Lougher <phillip@lougher.demon.co.uk>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2,
++ * or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++ *
++ * zlib_wrapper.c
++ */
++
++
++#include <linux/mutex.h>
++#include <linux/buffer_head.h>
++#include <linux/zlib.h>
++
++#include "squashfs_fs.h"
++#include "squashfs_fs_sb.h"
++#include "squashfs_fs_i.h"
++#include "squashfs.h"
++
++int zlib_uncompress(struct squashfs_sb_info *msblk, void **buffer,
++	struct buffer_head **bh, int b, int offset, int length, int srclength,
++	int pages)
++{
++	int zlib_err = 0, zlib_init = 0;
++	int avail, bytes, k = 0, page = 0;
++
++	mutex_lock(&msblk->read_data_mutex);
++
++	msblk->stream.avail_out = 0;
++	msblk->stream.avail_in = 0;
++
++	bytes = length;
++	do {
++		if (msblk->stream.avail_in == 0 && k < b) {
++			avail = min(bytes, msblk->devblksize - offset);
++			bytes -= avail;
++			wait_on_buffer(bh[k]);
++			if (!buffer_uptodate(bh[k]))
++				goto release_mutex;
++
++			if (avail == 0) {
++				offset = 0;
++				put_bh(bh[k++]);
++				continue;
++			}
++
++			msblk->stream.next_in = bh[k]->b_data + offset;
++			msblk->stream.avail_in = avail;
++			offset = 0;
++		}
++
++		if (msblk->stream.avail_out == 0 && page < pages) {
++			msblk->stream.next_out = buffer[page++];
++			msblk->stream.avail_out = PAGE_CACHE_SIZE;
++		}
++
++		if (!zlib_init) {
++			zlib_err = zlib_inflateInit(&msblk->stream);
++			if (zlib_err != Z_OK) {
++				ERROR("zlib_inflateInit returned unexpected "
++					"result 0x%x, srclength %d\n",
++					zlib_err, srclength);
++				goto release_mutex;
++			}
++			zlib_init = 1;
++		}
++
++		zlib_err = zlib_inflate(&msblk->stream, Z_SYNC_FLUSH);
++
++		if (msblk->stream.avail_in == 0 && k < b)
++			put_bh(bh[k++]);
++	} while (zlib_err == Z_OK);
++
++	if (zlib_err != Z_STREAM_END) {
++		ERROR("zlib_inflate error, data probably corrupt\n");
++		goto release_mutex;
++	}
++
++	zlib_err = zlib_inflateEnd(&msblk->stream);
++	if (zlib_err != Z_OK) {
++		ERROR("zlib_inflate error, data probably corrupt\n");
++		goto release_mutex;
++	}
++
++	mutex_unlock(&msblk->read_data_mutex);
++	return msblk->stream.total_out;
++
++release_mutex:
++	mutex_unlock(&msblk->read_data_mutex);
++
++	for (; k < b; k++)
++		put_bh(bh[k]);
++
++	return -EIO;
++}
diff --git a/target/linux/generic/patches-2.6.33/002-squashfs_factor_out_remaining_zlib.patch b/target/linux/generic/patches-2.6.33/002-squashfs_factor_out_remaining_zlib.patch
new file mode 100644
index 0000000000..eacbb97aef
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/002-squashfs_factor_out_remaining_zlib.patch
@@ -0,0 +1,317 @@
+From 37c44e85fd49676ec15ccaeea065662c1fbcda7d Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Wed, 23 Sep 2009 19:04:49 +0100
+Subject: [PATCH] Squashfs: Factor out remaining zlib dependencies into separate wrapper file
+
+Move zlib buffer init/destroy code into separate wrapper file.  Also
+make zlib z_stream field a void * removing the need to include zlib.h
+for most files.
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/block.c          |    1 -
+ fs/squashfs/cache.c          |    1 -
+ fs/squashfs/dir.c            |    1 -
+ fs/squashfs/export.c         |    1 -
+ fs/squashfs/file.c           |    1 -
+ fs/squashfs/fragment.c       |    1 -
+ fs/squashfs/id.c             |    1 -
+ fs/squashfs/inode.c          |    1 -
+ fs/squashfs/namei.c          |    1 -
+ fs/squashfs/squashfs.h       |    2 +
+ fs/squashfs/squashfs_fs_sb.h |    2 +-
+ fs/squashfs/super.c          |   14 +++------
+ fs/squashfs/symlink.c        |    1 -
+ fs/squashfs/zlib_wrapper.c   |   56 ++++++++++++++++++++++++++++++++---------
+ 14 files changed, 51 insertions(+), 33 deletions(-)
+
+--- a/fs/squashfs/block.c
++++ b/fs/squashfs/block.c
+@@ -31,7 +31,6 @@
+ #include <linux/slab.h>
+ #include <linux/string.h>
+ #include <linux/buffer_head.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/cache.c
++++ b/fs/squashfs/cache.c
+@@ -51,7 +51,6 @@
+ #include <linux/sched.h>
+ #include <linux/spinlock.h>
+ #include <linux/wait.h>
+-#include <linux/zlib.h>
+ #include <linux/pagemap.h>
+ 
+ #include "squashfs_fs.h"
+--- a/fs/squashfs/dir.c
++++ b/fs/squashfs/dir.c
+@@ -30,7 +30,6 @@
+ #include <linux/fs.h>
+ #include <linux/vfs.h>
+ #include <linux/slab.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/export.c
++++ b/fs/squashfs/export.c
+@@ -39,7 +39,6 @@
+ #include <linux/vfs.h>
+ #include <linux/dcache.h>
+ #include <linux/exportfs.h>
+-#include <linux/zlib.h>
+ #include <linux/slab.h>
+ 
+ #include "squashfs_fs.h"
+--- a/fs/squashfs/file.c
++++ b/fs/squashfs/file.c
+@@ -47,7 +47,6 @@
+ #include <linux/string.h>
+ #include <linux/pagemap.h>
+ #include <linux/mutex.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/fragment.c
++++ b/fs/squashfs/fragment.c
+@@ -36,7 +36,6 @@
+ #include <linux/fs.h>
+ #include <linux/vfs.h>
+ #include <linux/slab.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/id.c
++++ b/fs/squashfs/id.c
+@@ -34,7 +34,6 @@
+ #include <linux/fs.h>
+ #include <linux/vfs.h>
+ #include <linux/slab.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/inode.c
++++ b/fs/squashfs/inode.c
+@@ -40,7 +40,6 @@
+ 
+ #include <linux/fs.h>
+ #include <linux/vfs.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/namei.c
++++ b/fs/squashfs/namei.c
+@@ -57,7 +57,6 @@
+ #include <linux/slab.h>
+ #include <linux/string.h>
+ #include <linux/dcache.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/squashfs.h
++++ b/fs/squashfs/squashfs.h
+@@ -71,6 +71,8 @@ extern struct inode *squashfs_iget(struc
+ extern int squashfs_read_inode(struct inode *, long long);
+ 
+ /* zlib_wrapper.c */
++extern void *zlib_init(void);
++extern void zlib_free(void *);
+ extern int zlib_uncompress(struct squashfs_sb_info *, void **,
+ 				struct buffer_head **, int, int, int, int, int);
+ 
+--- a/fs/squashfs/squashfs_fs_sb.h
++++ b/fs/squashfs/squashfs_fs_sb.h
+@@ -64,7 +64,7 @@ struct squashfs_sb_info {
+ 	struct mutex		read_data_mutex;
+ 	struct mutex		meta_index_mutex;
+ 	struct meta_index	*meta_index;
+-	z_stream		stream;
++	void			*stream;
+ 	__le64			*inode_lookup_table;
+ 	u64			inode_table;
+ 	u64			directory_table;
+--- a/fs/squashfs/super.c
++++ b/fs/squashfs/super.c
+@@ -35,7 +35,6 @@
+ #include <linux/pagemap.h>
+ #include <linux/init.h>
+ #include <linux/module.h>
+-#include <linux/zlib.h>
+ #include <linux/magic.h>
+ 
+ #include "squashfs_fs.h"
+@@ -87,12 +86,9 @@ static int squashfs_fill_super(struct su
+ 	}
+ 	msblk = sb->s_fs_info;
+ 
+-	msblk->stream.workspace = kmalloc(zlib_inflate_workspacesize(),
+-		GFP_KERNEL);
+-	if (msblk->stream.workspace == NULL) {
+-		ERROR("Failed to allocate zlib workspace\n");
++	msblk->stream = zlib_init();
++	if (msblk->stream == NULL)
+ 		goto failure;
+-	}
+ 
+ 	sblk = kzalloc(sizeof(*sblk), GFP_KERNEL);
+ 	if (sblk == NULL) {
+@@ -292,17 +288,17 @@ failed_mount:
+ 	squashfs_cache_delete(msblk->block_cache);
+ 	squashfs_cache_delete(msblk->fragment_cache);
+ 	squashfs_cache_delete(msblk->read_page);
++	zlib_free(msblk->stream);
+ 	kfree(msblk->inode_lookup_table);
+ 	kfree(msblk->fragment_index);
+ 	kfree(msblk->id_table);
+-	kfree(msblk->stream.workspace);
+ 	kfree(sb->s_fs_info);
+ 	sb->s_fs_info = NULL;
+ 	kfree(sblk);
+ 	return err;
+ 
+ failure:
+-	kfree(msblk->stream.workspace);
++	zlib_free(msblk->stream);
+ 	kfree(sb->s_fs_info);
+ 	sb->s_fs_info = NULL;
+ 	return -ENOMEM;
+@@ -346,10 +342,10 @@ static void squashfs_put_super(struct su
+ 		squashfs_cache_delete(sbi->block_cache);
+ 		squashfs_cache_delete(sbi->fragment_cache);
+ 		squashfs_cache_delete(sbi->read_page);
++		zlib_free(sbi->stream);
+ 		kfree(sbi->id_table);
+ 		kfree(sbi->fragment_index);
+ 		kfree(sbi->meta_index);
+-		kfree(sbi->stream.workspace);
+ 		kfree(sb->s_fs_info);
+ 		sb->s_fs_info = NULL;
+ 	}
+--- a/fs/squashfs/symlink.c
++++ b/fs/squashfs/symlink.c
+@@ -36,7 +36,6 @@
+ #include <linux/slab.h>
+ #include <linux/string.h>
+ #include <linux/pagemap.h>
+-#include <linux/zlib.h>
+ 
+ #include "squashfs_fs.h"
+ #include "squashfs_fs_sb.h"
+--- a/fs/squashfs/zlib_wrapper.c
++++ b/fs/squashfs/zlib_wrapper.c
+@@ -31,21 +31,51 @@
+ #include "squashfs_fs_i.h"
+ #include "squashfs.h"
+ 
++void *zlib_init()
++{
++	z_stream *stream = kmalloc(sizeof(z_stream), GFP_KERNEL);
++	if (stream == NULL)
++		goto failed;
++	stream->workspace = kmalloc(zlib_inflate_workspacesize(),
++		GFP_KERNEL);
++	if (stream->workspace == NULL)
++		goto failed;
++
++	return stream;
++
++failed:
++	ERROR("Failed to allocate zlib workspace\n");
++	kfree(stream);
++	return NULL;
++}
++
++
++void zlib_free(void *strm)
++{
++	z_stream *stream = strm;
++
++	if (stream)
++		kfree(stream->workspace);
++	kfree(stream);
++}
++
++
+ int zlib_uncompress(struct squashfs_sb_info *msblk, void **buffer,
+ 	struct buffer_head **bh, int b, int offset, int length, int srclength,
+ 	int pages)
+ {
+ 	int zlib_err = 0, zlib_init = 0;
+ 	int avail, bytes, k = 0, page = 0;
++	z_stream *stream = msblk->stream;
+ 
+ 	mutex_lock(&msblk->read_data_mutex);
+ 
+-	msblk->stream.avail_out = 0;
+-	msblk->stream.avail_in = 0;
++	stream->avail_out = 0;
++	stream->avail_in = 0;
+ 
+ 	bytes = length;
+ 	do {
+-		if (msblk->stream.avail_in == 0 && k < b) {
++		if (stream->avail_in == 0 && k < b) {
+ 			avail = min(bytes, msblk->devblksize - offset);
+ 			bytes -= avail;
+ 			wait_on_buffer(bh[k]);
+@@ -58,18 +88,18 @@ int zlib_uncompress(struct squashfs_sb_i
+ 				continue;
+ 			}
+ 
+-			msblk->stream.next_in = bh[k]->b_data + offset;
+-			msblk->stream.avail_in = avail;
++			stream->next_in = bh[k]->b_data + offset;
++			stream->avail_in = avail;
+ 			offset = 0;
+ 		}
+ 
+-		if (msblk->stream.avail_out == 0 && page < pages) {
+-			msblk->stream.next_out = buffer[page++];
+-			msblk->stream.avail_out = PAGE_CACHE_SIZE;
++		if (stream->avail_out == 0 && page < pages) {
++			stream->next_out = buffer[page++];
++			stream->avail_out = PAGE_CACHE_SIZE;
+ 		}
+ 
+ 		if (!zlib_init) {
+-			zlib_err = zlib_inflateInit(&msblk->stream);
++			zlib_err = zlib_inflateInit(stream);
+ 			if (zlib_err != Z_OK) {
+ 				ERROR("zlib_inflateInit returned unexpected "
+ 					"result 0x%x, srclength %d\n",
+@@ -79,9 +109,9 @@ int zlib_uncompress(struct squashfs_sb_i
+ 			zlib_init = 1;
+ 		}
+ 
+-		zlib_err = zlib_inflate(&msblk->stream, Z_SYNC_FLUSH);
++		zlib_err = zlib_inflate(stream, Z_SYNC_FLUSH);
+ 
+-		if (msblk->stream.avail_in == 0 && k < b)
++		if (stream->avail_in == 0 && k < b)
+ 			put_bh(bh[k++]);
+ 	} while (zlib_err == Z_OK);
+ 
+@@ -90,14 +120,14 @@ int zlib_uncompress(struct squashfs_sb_i
+ 		goto release_mutex;
+ 	}
+ 
+-	zlib_err = zlib_inflateEnd(&msblk->stream);
++	zlib_err = zlib_inflateEnd(stream);
+ 	if (zlib_err != Z_OK) {
+ 		ERROR("zlib_inflate error, data probably corrupt\n");
+ 		goto release_mutex;
+ 	}
+ 
+ 	mutex_unlock(&msblk->read_data_mutex);
+-	return msblk->stream.total_out;
++	return stream->total_out;
+ 
+ release_mutex:
+ 	mutex_unlock(&msblk->read_data_mutex);
diff --git a/target/linux/generic/patches-2.6.33/003-squashfs_add_decompressor_framework.patch b/target/linux/generic/patches-2.6.33/003-squashfs_add_decompressor_framework.patch
new file mode 100644
index 0000000000..fdf0d407a1
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/003-squashfs_add_decompressor_framework.patch
@@ -0,0 +1,426 @@
+From 327fbf47a419befc6bff74f3ca42d2b6f0841903 Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Tue, 6 Oct 2009 04:04:15 +0100
+Subject: [PATCH] Squashfs: add a decompressor framework
+
+This adds a decompressor framework which allows multiple compression
+algorithms to be cleanly supported.
+
+Also update zlib wrapper and other code to use the new framework.
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/Makefile         |    2 +-
+ fs/squashfs/block.c          |    6 ++--
+ fs/squashfs/decompressor.c   |   58 ++++++++++++++++++++++++++++++++++++++++++
+ fs/squashfs/decompressor.h   |   55 +++++++++++++++++++++++++++++++++++++++
+ fs/squashfs/squashfs.h       |   14 +++++-----
+ fs/squashfs/squashfs_fs_sb.h |   41 +++++++++++++++--------------
+ fs/squashfs/super.c          |   45 ++++++++++++++++++-------------
+ fs/squashfs/zlib_wrapper.c   |   17 ++++++++++--
+ 8 files changed, 185 insertions(+), 53 deletions(-)
+ create mode 100644 fs/squashfs/decompressor.c
+ create mode 100644 fs/squashfs/decompressor.h
+
+--- a/fs/squashfs/Makefile
++++ b/fs/squashfs/Makefile
+@@ -4,4 +4,4 @@
+ 
+ obj-$(CONFIG_SQUASHFS) += squashfs.o
+ squashfs-y += block.o cache.o dir.o export.o file.o fragment.o id.o inode.o
+-squashfs-y += namei.o super.o symlink.o zlib_wrapper.o
++squashfs-y += namei.o super.o symlink.o zlib_wrapper.o decompressor.o
+--- a/fs/squashfs/block.c
++++ b/fs/squashfs/block.c
+@@ -36,7 +36,7 @@
+ #include "squashfs_fs_sb.h"
+ #include "squashfs_fs_i.h"
+ #include "squashfs.h"
+-
++#include "decompressor.h"
+ /*
+  * Read the metadata block length, this is stored in the first two
+  * bytes of the metadata block.
+@@ -151,8 +151,8 @@ int squashfs_read_data(struct super_bloc
+ 	}
+ 
+ 	if (compressed) {
+-		length = zlib_uncompress(msblk, buffer, bh, b, offset, length,
+-			srclength, pages);
++		length = squashfs_decompress(msblk, buffer, bh, b, offset,
++			length, srclength, pages);
+ 		if (length < 0)
+ 			goto read_failure;
+ 	} else {
+--- /dev/null
++++ b/fs/squashfs/decompressor.c
+@@ -0,0 +1,58 @@
++/*
++ * Squashfs - a compressed read only filesystem for Linux
++ *
++ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
++ * Phillip Lougher <phillip@lougher.demon.co.uk>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2,
++ * or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++ *
++ * decompressor.c
++ */
++
++#include <linux/types.h>
++#include <linux/mutex.h>
++#include <linux/buffer_head.h>
++
++#include "squashfs_fs.h"
++#include "squashfs_fs_sb.h"
++#include "squashfs_fs_i.h"
++#include "decompressor.h"
++#include "squashfs.h"
++
++/*
++ * This file (and decompressor.h) implements a decompressor framework for
++ * Squashfs, allowing multiple decompressors to be easily supported
++ */
++
++static const struct squashfs_decompressor squashfs_unknown_comp_ops = {
++	NULL, NULL, NULL, 0, "unknown", 0
++};
++
++static const struct squashfs_decompressor *decompressor[] = {
++	&squashfs_zlib_comp_ops,
++	&squashfs_unknown_comp_ops
++};
++
++
++const struct squashfs_decompressor *squashfs_lookup_decompressor(int id)
++{
++	int i;
++
++	for (i = 0; decompressor[i]->id; i++)
++		if (id == decompressor[i]->id)
++			break;
++
++	return decompressor[i];
++}
+--- /dev/null
++++ b/fs/squashfs/decompressor.h
+@@ -0,0 +1,55 @@
++#ifndef DECOMPRESSOR_H
++#define DECOMPRESSOR_H
++/*
++ * Squashfs - a compressed read only filesystem for Linux
++ *
++ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
++ * Phillip Lougher <phillip@lougher.demon.co.uk>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2,
++ * or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++ *
++ * decompressor.h
++ */
++
++struct squashfs_decompressor {
++	void	*(*init)(void);
++	void	(*free)(void *);
++	int	(*decompress)(struct squashfs_sb_info *, void **,
++		struct buffer_head **, int, int, int, int, int);
++	int	id;
++	char	*name;
++	int	supported;
++};
++
++static inline void *squashfs_decompressor_init(struct squashfs_sb_info *msblk)
++{
++	return msblk->decompressor->init();
++}
++
++static inline void squashfs_decompressor_free(struct squashfs_sb_info *msblk,
++	void *s)
++{
++	if (msblk->decompressor)
++		msblk->decompressor->free(s);
++}
++
++static inline int squashfs_decompress(struct squashfs_sb_info *msblk,
++	void **buffer, struct buffer_head **bh, int b, int offset, int length,
++	int srclength, int pages)
++{
++	return msblk->decompressor->decompress(msblk, buffer, bh, b, offset,
++		length, srclength, pages);
++}
++#endif
+--- a/fs/squashfs/squashfs.h
++++ b/fs/squashfs/squashfs.h
+@@ -51,6 +51,9 @@ extern struct squashfs_cache_entry *squa
+ 				u64, int);
+ extern int squashfs_read_table(struct super_block *, void *, u64, int);
+ 
++/* decompressor.c */
++extern const struct squashfs_decompressor *squashfs_lookup_decompressor(int);
++
+ /* export.c */
+ extern __le64 *squashfs_read_inode_lookup_table(struct super_block *, u64,
+ 				unsigned int);
+@@ -70,14 +73,8 @@ extern struct inode *squashfs_iget(struc
+ 				unsigned int);
+ extern int squashfs_read_inode(struct inode *, long long);
+ 
+-/* zlib_wrapper.c */
+-extern void *zlib_init(void);
+-extern void zlib_free(void *);
+-extern int zlib_uncompress(struct squashfs_sb_info *, void **,
+-				struct buffer_head **, int, int, int, int, int);
+-
+ /*
+- * Inodes and files operations
++ * Inodes, files and decompressor operations
+  */
+ 
+ /* dir.c */
+@@ -94,3 +91,6 @@ extern const struct inode_operations squ
+ 
+ /* symlink.c */
+ extern const struct address_space_operations squashfs_symlink_aops;
++
++/* zlib_wrapper.c */
++extern const struct squashfs_decompressor squashfs_zlib_comp_ops;
+--- a/fs/squashfs/squashfs_fs_sb.h
++++ b/fs/squashfs/squashfs_fs_sb.h
+@@ -52,25 +52,26 @@ struct squashfs_cache_entry {
+ };
+ 
+ struct squashfs_sb_info {
+-	int			devblksize;
+-	int			devblksize_log2;
+-	struct squashfs_cache	*block_cache;
+-	struct squashfs_cache	*fragment_cache;
+-	struct squashfs_cache	*read_page;
+-	int			next_meta_index;
+-	__le64			*id_table;
+-	__le64			*fragment_index;
+-	unsigned int		*fragment_index_2;
+-	struct mutex		read_data_mutex;
+-	struct mutex		meta_index_mutex;
+-	struct meta_index	*meta_index;
+-	void			*stream;
+-	__le64			*inode_lookup_table;
+-	u64			inode_table;
+-	u64			directory_table;
+-	unsigned int		block_size;
+-	unsigned short		block_log;
+-	long long		bytes_used;
+-	unsigned int		inodes;
++	const struct squashfs_decompressor	*decompressor;
++	int					devblksize;
++	int					devblksize_log2;
++	struct squashfs_cache			*block_cache;
++	struct squashfs_cache			*fragment_cache;
++	struct squashfs_cache			*read_page;
++	int					next_meta_index;
++	__le64					*id_table;
++	__le64					*fragment_index;
++	unsigned int				*fragment_index_2;
++	struct mutex				read_data_mutex;
++	struct mutex				meta_index_mutex;
++	struct meta_index			*meta_index;
++	void					*stream;
++	__le64					*inode_lookup_table;
++	u64					inode_table;
++	u64					directory_table;
++	unsigned int				block_size;
++	unsigned short				block_log;
++	long long				bytes_used;
++	unsigned int				inodes;
+ };
+ #endif
+--- a/fs/squashfs/super.c
++++ b/fs/squashfs/super.c
+@@ -41,27 +41,35 @@
+ #include "squashfs_fs_sb.h"
+ #include "squashfs_fs_i.h"
+ #include "squashfs.h"
++#include "decompressor.h"
+ 
+ static struct file_system_type squashfs_fs_type;
+ static const struct super_operations squashfs_super_ops;
+ 
+-static int supported_squashfs_filesystem(short major, short minor, short comp)
++static const struct squashfs_decompressor *supported_squashfs_filesystem(short
++	major, short minor, short id)
+ {
++	const struct squashfs_decompressor *decompressor;
++
+ 	if (major < SQUASHFS_MAJOR) {
+ 		ERROR("Major/Minor mismatch, older Squashfs %d.%d "
+ 			"filesystems are unsupported\n", major, minor);
+-		return -EINVAL;
++		return NULL;
+ 	} else if (major > SQUASHFS_MAJOR || minor > SQUASHFS_MINOR) {
+ 		ERROR("Major/Minor mismatch, trying to mount newer "
+ 			"%d.%d filesystem\n", major, minor);
+ 		ERROR("Please update your kernel\n");
+-		return -EINVAL;
++		return NULL;
+ 	}
+ 
+-	if (comp != ZLIB_COMPRESSION)
+-		return -EINVAL;
++	decompressor = squashfs_lookup_decompressor(id);
++	if (!decompressor->supported) {
++		ERROR("Filesystem uses \"%s\" compression. This is not "
++			"supported\n", decompressor->name);
++		return NULL;
++	}
+ 
+-	return 0;
++	return decompressor;
+ }
+ 
+ 
+@@ -86,10 +94,6 @@ static int squashfs_fill_super(struct su
+ 	}
+ 	msblk = sb->s_fs_info;
+ 
+-	msblk->stream = zlib_init();
+-	if (msblk->stream == NULL)
+-		goto failure;
+-
+ 	sblk = kzalloc(sizeof(*sblk), GFP_KERNEL);
+ 	if (sblk == NULL) {
+ 		ERROR("Failed to allocate squashfs_super_block\n");
+@@ -116,25 +120,25 @@ static int squashfs_fill_super(struct su
+ 		goto failed_mount;
+ 	}
+ 
++	err = -EINVAL;
++
+ 	/* Check it is a SQUASHFS superblock */
+ 	sb->s_magic = le32_to_cpu(sblk->s_magic);
+ 	if (sb->s_magic != SQUASHFS_MAGIC) {
+ 		if (!silent)
+ 			ERROR("Can't find a SQUASHFS superblock on %s\n",
+ 						bdevname(sb->s_bdev, b));
+-		err = -EINVAL;
+ 		goto failed_mount;
+ 	}
+ 
+-	/* Check the MAJOR & MINOR versions and compression type */
+-	err = supported_squashfs_filesystem(le16_to_cpu(sblk->s_major),
++	/* Check the MAJOR & MINOR versions and lookup compression type */
++	msblk->decompressor = supported_squashfs_filesystem(
++			le16_to_cpu(sblk->s_major),
+ 			le16_to_cpu(sblk->s_minor),
+ 			le16_to_cpu(sblk->compression));
+-	if (err < 0)
++	if (msblk->decompressor == NULL)
+ 		goto failed_mount;
+ 
+-	err = -EINVAL;
+-
+ 	/*
+ 	 * Check if there's xattrs in the filesystem.  These are not
+ 	 * supported in this version, so warn that they will be ignored.
+@@ -201,6 +205,10 @@ static int squashfs_fill_super(struct su
+ 
+ 	err = -ENOMEM;
+ 
++	msblk->stream = squashfs_decompressor_init(msblk);
++	if (msblk->stream == NULL)
++		goto failed_mount;
++
+ 	msblk->block_cache = squashfs_cache_init("metadata",
+ 			SQUASHFS_CACHED_BLKS, SQUASHFS_METADATA_SIZE);
+ 	if (msblk->block_cache == NULL)
+@@ -288,7 +296,7 @@ failed_mount:
+ 	squashfs_cache_delete(msblk->block_cache);
+ 	squashfs_cache_delete(msblk->fragment_cache);
+ 	squashfs_cache_delete(msblk->read_page);
+-	zlib_free(msblk->stream);
++	squashfs_decompressor_free(msblk, msblk->stream);
+ 	kfree(msblk->inode_lookup_table);
+ 	kfree(msblk->fragment_index);
+ 	kfree(msblk->id_table);
+@@ -298,7 +306,6 @@ failed_mount:
+ 	return err;
+ 
+ failure:
+-	zlib_free(msblk->stream);
+ 	kfree(sb->s_fs_info);
+ 	sb->s_fs_info = NULL;
+ 	return -ENOMEM;
+@@ -342,7 +349,7 @@ static void squashfs_put_super(struct su
+ 		squashfs_cache_delete(sbi->block_cache);
+ 		squashfs_cache_delete(sbi->fragment_cache);
+ 		squashfs_cache_delete(sbi->read_page);
+-		zlib_free(sbi->stream);
++		squashfs_decompressor_free(sbi, sbi->stream);
+ 		kfree(sbi->id_table);
+ 		kfree(sbi->fragment_index);
+ 		kfree(sbi->meta_index);
+--- a/fs/squashfs/zlib_wrapper.c
++++ b/fs/squashfs/zlib_wrapper.c
+@@ -30,8 +30,9 @@
+ #include "squashfs_fs_sb.h"
+ #include "squashfs_fs_i.h"
+ #include "squashfs.h"
++#include "decompressor.h"
+ 
+-void *zlib_init()
++static void *zlib_init(void)
+ {
+ 	z_stream *stream = kmalloc(sizeof(z_stream), GFP_KERNEL);
+ 	if (stream == NULL)
+@@ -50,7 +51,7 @@ failed:
+ }
+ 
+ 
+-void zlib_free(void *strm)
++static void zlib_free(void *strm)
+ {
+ 	z_stream *stream = strm;
+ 
+@@ -60,7 +61,7 @@ void zlib_free(void *strm)
+ }
+ 
+ 
+-int zlib_uncompress(struct squashfs_sb_info *msblk, void **buffer,
++static int zlib_uncompress(struct squashfs_sb_info *msblk, void **buffer,
+ 	struct buffer_head **bh, int b, int offset, int length, int srclength,
+ 	int pages)
+ {
+@@ -137,3 +138,13 @@ release_mutex:
+ 
+ 	return -EIO;
+ }
++
++const struct squashfs_decompressor squashfs_zlib_comp_ops = {
++	.init = zlib_init,
++	.free = zlib_free,
++	.decompress = zlib_uncompress,
++	.id = ZLIB_COMPRESSION,
++	.name = "zlib",
++	.supported = 1
++};
++
diff --git a/target/linux/generic/patches-2.6.33/004-squashfs_add_decompressor_lzma_lzo.patch b/target/linux/generic/patches-2.6.33/004-squashfs_add_decompressor_lzma_lzo.patch
new file mode 100644
index 0000000000..a378c00058
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/004-squashfs_add_decompressor_lzma_lzo.patch
@@ -0,0 +1,54 @@
+From 1885ca0a1973944684f252094a703b7c80dfc974 Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Wed, 14 Oct 2009 03:58:11 +0100
+Subject: [PATCH] Squashfs: add decompressor entries for lzma and lzo
+
+Add knowledge of lzma/lzo compression formats to the decompressor
+framework.  For now these are added as unsupported.  Without
+these entries lzma/lzo compressed filesystems will be flagged as
+having unknown compression which is undesirable.
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/decompressor.c |   10 ++++++++++
+ fs/squashfs/squashfs_fs.h  |    4 +++-
+ 2 files changed, 13 insertions(+), 1 deletions(-)
+
+--- a/fs/squashfs/decompressor.c
++++ b/fs/squashfs/decompressor.c
+@@ -36,12 +36,22 @@
+  * Squashfs, allowing multiple decompressors to be easily supported
+  */
+ 
++static const struct squashfs_decompressor squashfs_lzma_unsupported_comp_ops = {
++	NULL, NULL, NULL, LZMA_COMPRESSION, "lzma", 0
++};
++
++static const struct squashfs_decompressor squashfs_lzo_unsupported_comp_ops = {
++	NULL, NULL, NULL, LZO_COMPRESSION, "lzo", 0
++};
++
+ static const struct squashfs_decompressor squashfs_unknown_comp_ops = {
+ 	NULL, NULL, NULL, 0, "unknown", 0
+ };
+ 
+ static const struct squashfs_decompressor *decompressor[] = {
+ 	&squashfs_zlib_comp_ops,
++	&squashfs_lzma_unsupported_comp_ops,
++	&squashfs_lzo_unsupported_comp_ops,
+ 	&squashfs_unknown_comp_ops
+ };
+ 
+--- a/fs/squashfs/squashfs_fs.h
++++ b/fs/squashfs/squashfs_fs.h
+@@ -211,7 +211,9 @@ struct meta_index {
+ /*
+  * definitions for structures on disk
+  */
+-#define ZLIB_COMPRESSION	 1
++#define ZLIB_COMPRESSION	1
++#define LZMA_COMPRESSION	2
++#define LZO_COMPRESSION		3
+ 
+ struct squashfs_super_block {
+ 	__le32			s_magic;
diff --git a/target/linux/generic/patches-2.6.33/005-squashfs_extra_parameter.patch b/target/linux/generic/patches-2.6.33/005-squashfs_extra_parameter.patch
new file mode 100644
index 0000000000..0991681346
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/005-squashfs_extra_parameter.patch
@@ -0,0 +1,42 @@
+From 5f393ede3ddb5dd4cc2a9f243182fac45f1ce10b Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Wed, 14 Oct 2009 04:07:54 +0100
+Subject: [PATCH] Squashfs: add an extra parameter to the decompressor init function
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/decompressor.h |    4 ++--
+ fs/squashfs/zlib_wrapper.c |    2 +-
+ 2 files changed, 3 insertions(+), 3 deletions(-)
+
+--- a/fs/squashfs/decompressor.h
++++ b/fs/squashfs/decompressor.h
+@@ -24,7 +24,7 @@
+  */
+ 
+ struct squashfs_decompressor {
+-	void	*(*init)(void);
++	void	*(*init)(struct squashfs_sb_info *);
+ 	void	(*free)(void *);
+ 	int	(*decompress)(struct squashfs_sb_info *, void **,
+ 		struct buffer_head **, int, int, int, int, int);
+@@ -35,7 +35,7 @@ struct squashfs_decompressor {
+ 
+ static inline void *squashfs_decompressor_init(struct squashfs_sb_info *msblk)
+ {
+-	return msblk->decompressor->init();
++	return msblk->decompressor->init(msblk);
+ }
+ 
+ static inline void squashfs_decompressor_free(struct squashfs_sb_info *msblk,
+--- a/fs/squashfs/zlib_wrapper.c
++++ b/fs/squashfs/zlib_wrapper.c
+@@ -32,7 +32,7 @@
+ #include "squashfs.h"
+ #include "decompressor.h"
+ 
+-static void *zlib_init(void)
++static void *zlib_init(struct squashfs_sb_info *dummy)
+ {
+ 	z_stream *stream = kmalloc(sizeof(z_stream), GFP_KERNEL);
+ 	if (stream == NULL)
diff --git a/target/linux/generic/patches-2.6.33/006-squashfs_add_lzma.patch b/target/linux/generic/patches-2.6.33/006-squashfs_add_lzma.patch
new file mode 100644
index 0000000000..9fd57970f2
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/006-squashfs_add_lzma.patch
@@ -0,0 +1,216 @@
+From f49e1efdd179d54e814ff2a8e8f469496583062c Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Tue, 20 Oct 2009 10:54:36 +0100
+Subject: [PATCH] Squashfs: add LZMA compression
+
+Add support for LZMA compressed filesystems.  This is an initial
+implementation.
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/Kconfig        |    5 ++
+ fs/squashfs/Makefile       |    1 +
+ fs/squashfs/decompressor.c |    4 +
+ fs/squashfs/lzma_wrapper.c |  151 ++++++++++++++++++++++++++++++++++++++++++++
+ fs/squashfs/squashfs.h     |    3 +
+ 5 files changed, 164 insertions(+), 0 deletions(-)
+ create mode 100644 fs/squashfs/lzma_wrapper.c
+
+--- a/fs/squashfs/Kconfig
++++ b/fs/squashfs/Kconfig
+@@ -26,6 +26,11 @@ config SQUASHFS
+ 
+ 	  If unsure, say N.
+ 
++config SQUASHFS_LZMA
++	bool "Include support for LZMA compressed file systems"
++	depends on SQUASHFS
++	select DECOMPRESS_LZMA
++
+ config SQUASHFS_EMBEDDED
+ 
+ 	bool "Additional option for memory-constrained systems" 
+--- a/fs/squashfs/Makefile
++++ b/fs/squashfs/Makefile
+@@ -5,3 +5,4 @@
+ obj-$(CONFIG_SQUASHFS) += squashfs.o
+ squashfs-y += block.o cache.o dir.o export.o file.o fragment.o id.o inode.o
+ squashfs-y += namei.o super.o symlink.o zlib_wrapper.o decompressor.o
++squashfs-$(CONFIG_SQUASHFS_LZMA) += lzma_wrapper.o
+--- a/fs/squashfs/decompressor.c
++++ b/fs/squashfs/decompressor.c
+@@ -50,7 +50,11 @@ static const struct squashfs_decompresso
+ 
+ static const struct squashfs_decompressor *decompressor[] = {
+ 	&squashfs_zlib_comp_ops,
++#ifdef CONFIG_SQUASHFS_LZMA
++	&squashfs_lzma_comp_ops,
++#else
+ 	&squashfs_lzma_unsupported_comp_ops,
++#endif
+ 	&squashfs_lzo_unsupported_comp_ops,
+ 	&squashfs_unknown_comp_ops
+ };
+--- /dev/null
++++ b/fs/squashfs/lzma_wrapper.c
+@@ -0,0 +1,151 @@
++/*
++ * Squashfs - a compressed read only filesystem for Linux
++ *
++ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
++ * Phillip Lougher <phillip@lougher.demon.co.uk>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2,
++ * or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++ *
++ * lzma_wrapper.c
++ */
++
++#include <asm/unaligned.h>
++#include <linux/buffer_head.h>
++#include <linux/mutex.h>
++#include <linux/vmalloc.h>
++#include <linux/decompress/unlzma.h>
++
++#include "squashfs_fs.h"
++#include "squashfs_fs_sb.h"
++#include "squashfs_fs_i.h"
++#include "squashfs.h"
++#include "decompressor.h"
++
++struct squashfs_lzma {
++	void	*input;
++	void	*output;
++};
++
++/* decompress_unlzma.c is currently non re-entrant... */
++DEFINE_MUTEX(lzma_mutex);
++
++/* decompress_unlzma.c doesn't provide any context in its callbacks... */
++static int lzma_error;
++
++static void error(char *m)
++{
++	ERROR("unlzma error: %s\n", m);
++	lzma_error = 1;
++}
++
++	
++static void *lzma_init(struct squashfs_sb_info *msblk)
++{
++	struct squashfs_lzma *stream = kzalloc(sizeof(*stream), GFP_KERNEL);
++	if (stream == NULL)
++		goto failed;
++	stream->input = vmalloc(msblk->block_size);
++	if (stream->input == NULL)
++		goto failed;
++	stream->output = vmalloc(msblk->block_size);
++	if (stream->output == NULL)
++		goto failed2;
++
++	return stream;
++
++failed2:
++	vfree(stream->input);
++failed:
++	ERROR("failed to allocate lzma workspace\n");
++	kfree(stream);
++	return NULL;
++}
++
++
++static void lzma_free(void *strm)
++{
++	struct squashfs_lzma *stream = strm;
++
++	if (stream) {
++		vfree(stream->input);
++		vfree(stream->output);
++	}
++	kfree(stream);
++}
++
++
++static int lzma_uncompress(struct squashfs_sb_info *msblk, void **buffer,
++	struct buffer_head **bh, int b, int offset, int length, int srclength,
++	int pages)
++{
++	struct squashfs_lzma *stream = msblk->stream;
++	void *buff = stream->input;
++	int avail, i, bytes = length, res;
++
++	mutex_lock(&lzma_mutex);
++
++	for (i = 0; i < b; i++) {
++		wait_on_buffer(bh[i]);
++		if (!buffer_uptodate(bh[i]))
++			goto block_release;
++
++		avail = min(bytes, msblk->devblksize - offset);
++		memcpy(buff, bh[i]->b_data + offset, avail);
++		buff += avail;
++		bytes -= avail;
++		offset = 0;
++		put_bh(bh[i]);
++	}
++
++	lzma_error = 0;
++	res = unlzma(stream->input, length, NULL, NULL, stream->output, NULL,
++							error);
++	if (res || lzma_error)
++		goto failed;
++
++	/* uncompressed size is stored in the LZMA header (5 byte offset) */
++	res = bytes = get_unaligned_le32(stream->input + 5);
++	for (i = 0, buff = stream->output; bytes && i < pages; i++) {
++		avail = min_t(int, bytes, PAGE_CACHE_SIZE);
++		memcpy(buffer[i], buff, avail);
++		buff += avail;
++		bytes -= avail;
++	}
++	if (bytes)
++		goto failed;
++
++	mutex_unlock(&lzma_mutex);
++	return res;
++
++block_release:
++	for (; i < b; i++)
++		put_bh(bh[i]);
++
++failed:
++	mutex_unlock(&lzma_mutex);
++
++	ERROR("lzma decompression failed, data probably corrupt\n");
++	return -EIO;
++}
++
++const struct squashfs_decompressor squashfs_lzma_comp_ops = {
++	.init = lzma_init,
++	.free = lzma_free,
++	.decompress = lzma_uncompress,
++	.id = LZMA_COMPRESSION,
++	.name = "lzma",
++	.supported = 1
++};
++
+--- a/fs/squashfs/squashfs.h
++++ b/fs/squashfs/squashfs.h
+@@ -94,3 +94,6 @@ extern const struct address_space_operat
+ 
+ /* zlib_wrapper.c */
+ extern const struct squashfs_decompressor squashfs_zlib_comp_ops;
++
++/* lzma wrapper.c */
++extern const struct squashfs_decompressor squashfs_lzma_comp_ops;
diff --git a/target/linux/generic/patches-2.6.33/007-squashfs_make_lzma_available.patch b/target/linux/generic/patches-2.6.33/007-squashfs_make_lzma_available.patch
new file mode 100644
index 0000000000..c1a105d0dc
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/007-squashfs_make_lzma_available.patch
@@ -0,0 +1,165 @@
+From fdf23ed283bc6ef5c25076ce2065f892120ff556 Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Thu, 22 Oct 2009 04:57:38 +0100
+Subject: [PATCH] Squashfs: Make unlzma available to non initramfs/initrd code
+
+Add a config option DECOMPRESS_LZMA_NEEDED which allows subsystems to
+specify they need the unlzma code.  Normally decompress_unlzma.c is
+compiled with __init and unlzma is not exported to modules.
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/Kconfig                   |    1 +
+ include/linux/decompress/bunzip2_mm.h |   12 ++++++++++++
+ include/linux/decompress/inflate_mm.h |   12 ++++++++++++
+ include/linux/decompress/mm.h         |    3 ---
+ include/linux/decompress/unlzma_mm.h  |   20 ++++++++++++++++++++
+ lib/Kconfig                           |    3 +++
+ lib/decompress_bunzip2.c              |    1 +
+ lib/decompress_inflate.c              |    1 +
+ lib/decompress_unlzma.c               |    5 ++++-
+ 9 files changed, 54 insertions(+), 4 deletions(-)
+ create mode 100644 include/linux/decompress/bunzip2_mm.h
+ create mode 100644 include/linux/decompress/inflate_mm.h
+ create mode 100644 include/linux/decompress/unlzma_mm.h
+
+--- a/fs/squashfs/Kconfig
++++ b/fs/squashfs/Kconfig
+@@ -30,6 +30,7 @@ config SQUASHFS_LZMA
+ 	bool "Include support for LZMA compressed file systems"
+ 	depends on SQUASHFS
+ 	select DECOMPRESS_LZMA
++	select DECOMPRESS_LZMA_NEEDED
+ 
+ config SQUASHFS_EMBEDDED
+ 
+--- /dev/null
++++ b/include/linux/decompress/bunzip2_mm.h
+@@ -0,0 +1,12 @@
++#ifndef BUNZIP2_MM_H
++#define BUNZIP2_MM_H
++
++#ifdef STATIC
++/* Code active when included from pre-boot environment: */
++#define INIT
++#else
++/* Compile for initramfs/initrd code only */
++#define INIT __init
++#endif
++
++#endif
+--- /dev/null
++++ b/include/linux/decompress/inflate_mm.h
+@@ -0,0 +1,12 @@
++#ifndef INFLATE_MM_H
++#define INFLATE_MM_H
++
++#ifdef STATIC
++/* Code active when included from pre-boot environment: */
++#define INIT
++#else
++/* Compile for initramfs/initrd code only */
++#define INIT __init
++#endif
++
++#endif
+--- a/include/linux/decompress/mm.h
++++ b/include/linux/decompress/mm.h
+@@ -63,8 +63,6 @@ static void free(void *where)
+ 
+ #define set_error_fn(x)
+ 
+-#define INIT
+-
+ #else /* STATIC */
+ 
+ /* Code active when compiled standalone for use when loading ramdisk: */
+@@ -87,7 +85,6 @@ static void free(void *where)
+ static void(*error)(char *m);
+ #define set_error_fn(x) error = x;
+ 
+-#define INIT __init
+ #define STATIC
+ 
+ #include <linux/init.h>
+--- /dev/null
++++ b/include/linux/decompress/unlzma_mm.h
+@@ -0,0 +1,20 @@
++#ifndef UNLZMA_MM_H
++#define UNLZMA_MM_H
++
++#ifdef STATIC
++
++/* Code active when included from pre-boot environment: */
++#define INIT
++
++#elif defined(CONFIG_DECOMPRESS_LZMA_NEEDED)
++
++/* Make it available to non initramfs/initrd code */
++#define INIT
++#include <linux/module.h>
++#else
++
++/* Compile for initramfs/initrd code only */
++#define INIT __init
++#endif
++
++#endif
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -121,6 +121,9 @@ config DECOMPRESS_LZO
+ 	select LZO_DECOMPRESS
+ 	tristate
+ 
++config DECOMPRESS_LZMA_NEEDED
++	 boolean
++
+ #
+ # Generic allocator support is selected if needed
+ #
+--- a/lib/decompress_bunzip2.c
++++ b/lib/decompress_bunzip2.c
+@@ -52,6 +52,7 @@
+ #include <linux/slab.h>
+ #endif /* STATIC */
+ 
++#include <linux/decompress/bunzip2_mm.h>
+ #include <linux/decompress/mm.h>
+ 
+ #ifndef INT_MAX
+--- a/lib/decompress_inflate.c
++++ b/lib/decompress_inflate.c
+@@ -23,6 +23,7 @@
+ 
+ #endif /* STATIC */
+ 
++#include <linux/decompress/inflate_mm.h>
+ #include <linux/decompress/mm.h>
+ 
+ #define GZIP_IOBUF_SIZE (16*1024)
+--- a/lib/decompress_unlzma.c
++++ b/lib/decompress_unlzma.c
+@@ -36,6 +36,7 @@
+ #include <linux/slab.h>
+ #endif /* STATIC */
+ 
++#include <linux/decompress/unlzma_mm.h>
+ #include <linux/decompress/mm.h>
+ 
+ #define	MIN(a, b) (((a) < (b)) ? (a) : (b))
+@@ -531,7 +532,7 @@ static inline void INIT process_bit1(str
+ 
+ 
+ 
+-STATIC inline int INIT unlzma(unsigned char *buf, int in_len,
++STATIC int INIT unlzma(unsigned char *buf, int in_len,
+ 			      int(*fill)(void*, unsigned int),
+ 			      int(*flush)(void*, unsigned int),
+ 			      unsigned char *output,
+@@ -664,4 +665,6 @@ STATIC int INIT decompress(unsigned char
+ {
+ 	return unlzma(buf, in_len - 4, fill, flush, output, posp, error_fn);
+ }
++#elif defined(CONFIG_DECOMPRESS_LZMA_NEEDED)
++EXPORT_SYMBOL(unlzma);
+ #endif
diff --git a/target/linux/generic/patches-2.6.33/008-jffs2_make_lzma_available.patch b/target/linux/generic/patches-2.6.33/008-jffs2_make_lzma_available.patch
new file mode 100644
index 0000000000..482b7039a2
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/008-jffs2_make_lzma_available.patch
@@ -0,0 +1,5142 @@
+--- a/fs/jffs2/Kconfig
++++ b/fs/jffs2/Kconfig
+@@ -139,6 +139,15 @@ config JFFS2_LZO
+ 	  This feature was added in July, 2007. Say 'N' if you need
+ 	  compatibility with older bootloaders or kernels.
+ 
++config JFFS2_LZMA
++	bool "JFFS2 LZMA compression support" if JFFS2_COMPRESSION_OPTIONS
++	select LZMA_COMPRESS
++	select LZMA_DECOMPRESS
++	depends on JFFS2_FS
++	default n
++	help
++	  JFFS2 wrapper to the LZMA C SDK
++
+ config JFFS2_RTIME
+ 	bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
+ 	depends on JFFS2_FS
+--- a/fs/jffs2/Makefile
++++ b/fs/jffs2/Makefile
+@@ -18,4 +18,7 @@ jffs2-$(CONFIG_JFFS2_RUBIN)	+= compr_rub
+ jffs2-$(CONFIG_JFFS2_RTIME)	+= compr_rtime.o
+ jffs2-$(CONFIG_JFFS2_ZLIB)	+= compr_zlib.o
+ jffs2-$(CONFIG_JFFS2_LZO)	+= compr_lzo.o
++jffs2-$(CONFIG_JFFS2_LZMA)      += compr_lzma.o
+ jffs2-$(CONFIG_JFFS2_SUMMARY)   += summary.o
++
++CFLAGS_compr_lzma.o += -Iinclude/linux -Ilib/lzma
+--- a/fs/jffs2/compr.c
++++ b/fs/jffs2/compr.c
+@@ -319,6 +319,9 @@ int __init jffs2_compressors_init(void)
+ #ifdef CONFIG_JFFS2_LZO
+ 	jffs2_lzo_init();
+ #endif
++#ifdef CONFIG_JFFS2_LZMA
++        jffs2_lzma_init();
++#endif
+ /* Setting default compression mode */
+ #ifdef CONFIG_JFFS2_CMODE_NONE
+ 	jffs2_compression_mode = JFFS2_COMPR_MODE_NONE;
+@@ -342,6 +345,9 @@ int __init jffs2_compressors_init(void)
+ int jffs2_compressors_exit(void)
+ {
+ /* Unregistering compressors */
++#ifdef CONFIG_JFFS2_LZMA
++        jffs2_lzma_exit();
++#endif
+ #ifdef CONFIG_JFFS2_LZO
+ 	jffs2_lzo_exit();
+ #endif
+--- a/fs/jffs2/compr.h
++++ b/fs/jffs2/compr.h
+@@ -28,9 +28,9 @@
+ #define JFFS2_DYNRUBIN_PRIORITY  20
+ #define JFFS2_LZARI_PRIORITY     30
+ #define JFFS2_RTIME_PRIORITY     50
+-#define JFFS2_ZLIB_PRIORITY      60
+-#define JFFS2_LZO_PRIORITY       80
+-
++#define JFFS2_LZMA_PRIORITY      70
++#define JFFS2_ZLIB_PRIORITY      80
++#define JFFS2_LZO_PRIORITY       90
+ 
+ #define JFFS2_RUBINMIPS_DISABLED /* RUBINs will be used only */
+ #define JFFS2_DYNRUBIN_DISABLED  /*	   for decompression */
+@@ -98,5 +98,9 @@ void jffs2_zlib_exit(void);
+ int jffs2_lzo_init(void);
+ void jffs2_lzo_exit(void);
+ #endif
++#ifdef CONFIG_JFFS2_LZMA
++int jffs2_lzma_init(void);
++void jffs2_lzma_exit(void);
++#endif
+ 
+ #endif /* __JFFS2_COMPR_H__ */
+--- /dev/null
++++ b/fs/jffs2/compr_lzma.c
+@@ -0,0 +1,128 @@
++/*
++ * JFFS2 -- Journalling Flash File System, Version 2.
++ *
++ * For licensing information, see the file 'LICENCE' in this directory.
++ *
++ * JFFS2 wrapper to the LZMA C SDK
++ *
++ */
++
++#include <linux/lzma.h>
++#include "compr.h"
++
++#ifdef __KERNEL__
++	static DEFINE_MUTEX(deflate_mutex);
++#endif
++
++CLzmaEncHandle *p;
++Byte propsEncoded[LZMA_PROPS_SIZE];
++SizeT propsSize = sizeof(propsEncoded);
++
++STATIC void lzma_free_workspace(void)
++{
++	LzmaEnc_Destroy(p, &lzma_alloc, &lzma_alloc);
++}
++
++STATIC int INIT lzma_alloc_workspace(CLzmaEncProps *props)
++{
++	if ((p = (CLzmaEncHandle *)LzmaEnc_Create(&lzma_alloc)) == NULL)
++	{
++		PRINT_ERROR("Failed to allocate lzma deflate workspace\n");
++		return -ENOMEM;
++	}
++
++	if (LzmaEnc_SetProps(p, props) != SZ_OK)
++	{
++		lzma_free_workspace();
++		return -1;
++	}
++	
++	if (LzmaEnc_WriteProperties(p, propsEncoded, &propsSize) != SZ_OK)
++	{
++		lzma_free_workspace();
++		return -1;
++	}
++
++        return 0;
++}
++
++STATIC int jffs2_lzma_compress(unsigned char *data_in, unsigned char *cpage_out,
++			      uint32_t *sourcelen, uint32_t *dstlen, void *model)
++{
++	SizeT compress_size = (SizeT)(*dstlen);
++	int ret;
++
++	#ifdef __KERNEL__
++		mutex_lock(&deflate_mutex);
++	#endif
++
++	ret = LzmaEnc_MemEncode(p, cpage_out, &compress_size, data_in, *sourcelen,
++		0, NULL, &lzma_alloc, &lzma_alloc);
++
++	#ifdef __KERNEL__
++		mutex_unlock(&deflate_mutex);
++	#endif
++
++	if (ret != SZ_OK)
++		return -1;
++
++	*dstlen = (uint32_t)compress_size;
++
++	return 0;
++}
++
++STATIC int jffs2_lzma_decompress(unsigned char *data_in, unsigned char *cpage_out,
++				 uint32_t srclen, uint32_t destlen, void *model)
++{
++	int ret;
++	SizeT dl = (SizeT)destlen;
++	SizeT sl = (SizeT)srclen;
++	ELzmaStatus status;
++	
++	ret = LzmaDecode(cpage_out, &dl, data_in, &sl, propsEncoded,
++		propsSize, LZMA_FINISH_ANY, &status, &lzma_alloc);
++
++	if (ret != SZ_OK || status == LZMA_STATUS_NOT_FINISHED || dl != (SizeT)destlen)
++		return -1;
++
++	return 0;
++}
++
++static struct jffs2_compressor jffs2_lzma_comp = {
++	.priority = JFFS2_LZMA_PRIORITY,
++	.name = "lzma",
++	.compr = JFFS2_COMPR_LZMA,
++	.compress = &jffs2_lzma_compress,
++	.decompress = &jffs2_lzma_decompress,
++	.disabled = 0,
++};
++
++int INIT jffs2_lzma_init(void)
++{
++        int ret;
++	CLzmaEncProps props;
++	LzmaEncProps_Init(&props);
++
++        props.dictSize = LZMA_BEST_DICT(0x2000);
++        props.level = LZMA_BEST_LEVEL;
++        props.lc = LZMA_BEST_LC;
++        props.lp = LZMA_BEST_LP;
++        props.pb = LZMA_BEST_PB;
++        props.fb = LZMA_BEST_FB;
++
++	ret = lzma_alloc_workspace(&props);
++        if (ret < 0)
++                return ret;
++
++	ret = jffs2_register_compressor(&jffs2_lzma_comp);
++	if (ret)
++		lzma_free_workspace();
++	
++        return ret;
++}
++
++void jffs2_lzma_exit(void)
++{
++	jffs2_unregister_compressor(&jffs2_lzma_comp);
++	lzma_free_workspace();
++}
+--- a/fs/jffs2/super.c
++++ b/fs/jffs2/super.c
+@@ -254,14 +254,41 @@ static int __init init_jffs2_fs(void)
+ 	BUILD_BUG_ON(sizeof(struct jffs2_raw_inode) != 68);
+ 	BUILD_BUG_ON(sizeof(struct jffs2_raw_summary) != 32);
+ 
+-	printk(KERN_INFO "JFFS2 version 2.2."
++	printk(KERN_INFO "JFFS2 version 2.2"
+ #ifdef CONFIG_JFFS2_FS_WRITEBUFFER
+ 	       " (NAND)"
+ #endif
+ #ifdef CONFIG_JFFS2_SUMMARY
+-	       " (SUMMARY) "
++	       " (SUMMARY)"
+ #endif
+-	       " © 2001-2006 Red Hat, Inc.\n");
++#ifdef CONFIG_JFFS2_ZLIB
++	       " (ZLIB)"
++#endif
++#ifdef CONFIG_JFFS2_LZO
++	       " (LZO)"
++#endif
++#ifdef CONFIG_JFFS2_LZMA
++	       " (LZMA)"
++#endif
++#ifdef CONFIG_JFFS2_RTIME
++	       " (RTIME)"
++#endif
++#ifdef CONFIG_JFFS2_RUBIN
++	       " (RUBIN)"
++#endif
++#ifdef  CONFIG_JFFS2_CMODE_NONE
++	       " (CMODE_NONE)"
++#endif
++#ifdef CONFIG_JFFS2_CMODE_PRIORITY
++	       " (CMODE_PRIORITY)"
++#endif
++#ifdef CONFIG_JFFS2_CMODE_SIZE
++	       " (CMODE_SIZE)"
++#endif
++#ifdef CONFIG_JFFS2_CMODE_FAVOURLZO
++	       " (CMODE_FAVOURLZO)"
++#endif
++	       " (c) 2001-2006 Red Hat, Inc.\n");
+ 
+ 	jffs2_inode_cachep = kmem_cache_create("jffs2_i",
+ 					     sizeof(struct jffs2_inode_info),
+--- a/include/linux/jffs2.h
++++ b/include/linux/jffs2.h
+@@ -45,6 +45,7 @@
+ #define JFFS2_COMPR_DYNRUBIN	0x05
+ #define JFFS2_COMPR_ZLIB	0x06
+ #define JFFS2_COMPR_LZO		0x07
++#define JFFS2_COMPR_LZMA	0x08
+ /* Compatibility flags. */
+ #define JFFS2_COMPAT_MASK 0xc000      /* What do to if an unknown nodetype is found */
+ #define JFFS2_NODE_ACCURATE 0x2000
+--- /dev/null
++++ b/include/linux/lzma.h
+@@ -0,0 +1,62 @@
++#ifndef __LZMA_H__
++#define __LZMA_H__
++
++#ifdef __KERNEL__
++	#include <linux/kernel.h>
++	#include <linux/sched.h>
++	#include <linux/slab.h>
++	#include <linux/vmalloc.h>
++	#include <linux/init.h>
++	#define LZMA_MALLOC vmalloc
++	#define LZMA_FREE vfree
++	#define PRINT_ERROR(msg) printk(KERN_WARNING #msg)
++	#define INIT __init
++	#define STATIC static
++#else
++	#include <stdint.h>
++	#include <stdlib.h>
++	#include <stdio.h>
++	#include <unistd.h>
++	#include <string.h>
++	#include <asm/types.h>
++	#include <errno.h>
++	#include <linux/jffs2.h>
++	#ifndef PAGE_SIZE
++		extern int page_size;
++		#define PAGE_SIZE page_size
++	#endif
++	#define LZMA_MALLOC malloc
++	#define LZMA_FREE free
++	#define PRINT_ERROR(msg) fprintf(stderr, msg)
++	#define INIT
++	#define STATIC
++#endif
++
++#include "lzma/LzmaDec.h"
++#include "lzma/LzmaEnc.h"
++
++#define LZMA_BEST_LEVEL (9)
++#define LZMA_BEST_LC    (0)
++#define LZMA_BEST_LP    (0)
++#define LZMA_BEST_PB    (0)
++#define LZMA_BEST_FB  (273)
++
++#define LZMA_BEST_DICT(n) (((int)((n) / 2)) * 2)
++
++static void *p_lzma_malloc(void *p, size_t size)
++{
++        if (size == 0)
++                return NULL;
++
++        return LZMA_MALLOC(size);
++}
++
++static void p_lzma_free(void *p, void *address)
++{
++        if (address != NULL)
++                LZMA_FREE(address);
++}
++
++static ISzAlloc lzma_alloc = {p_lzma_malloc, p_lzma_free};
++
++#endif
+--- /dev/null
++++ b/include/linux/lzma/LzFind.h
+@@ -0,0 +1,115 @@
++/* LzFind.h -- Match finder for LZ algorithms
++2009-04-22 : Igor Pavlov : Public domain */
++
++#ifndef __LZ_FIND_H
++#define __LZ_FIND_H
++
++#include "Types.h"
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++typedef UInt32 CLzRef;
++
++typedef struct _CMatchFinder
++{
++  Byte *buffer;
++  UInt32 pos;
++  UInt32 posLimit;
++  UInt32 streamPos;
++  UInt32 lenLimit;
++
++  UInt32 cyclicBufferPos;
++  UInt32 cyclicBufferSize; /* it must be = (historySize + 1) */
++
++  UInt32 matchMaxLen;
++  CLzRef *hash;
++  CLzRef *son;
++  UInt32 hashMask;
++  UInt32 cutValue;
++
++  Byte *bufferBase;
++  ISeqInStream *stream;
++  int streamEndWasReached;
++
++  UInt32 blockSize;
++  UInt32 keepSizeBefore;
++  UInt32 keepSizeAfter;
++
++  UInt32 numHashBytes;
++  int directInput;
++  size_t directInputRem;
++  int btMode;
++  int bigHash;
++  UInt32 historySize;
++  UInt32 fixedHashSize;
++  UInt32 hashSizeSum;
++  UInt32 numSons;
++  SRes result;
++  UInt32 crc[256];
++} CMatchFinder;
++
++#define Inline_MatchFinder_GetPointerToCurrentPos(p) ((p)->buffer)
++#define Inline_MatchFinder_GetIndexByte(p, index) ((p)->buffer[(Int32)(index)])
++
++#define Inline_MatchFinder_GetNumAvailableBytes(p) ((p)->streamPos - (p)->pos)
++
++int MatchFinder_NeedMove(CMatchFinder *p);
++Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p);
++void MatchFinder_MoveBlock(CMatchFinder *p);
++void MatchFinder_ReadIfRequired(CMatchFinder *p);
++
++void MatchFinder_Construct(CMatchFinder *p);
++
++/* Conditions:
++     historySize <= 3 GB
++     keepAddBufferBefore + matchMaxLen + keepAddBufferAfter < 511MB
++*/
++int MatchFinder_Create(CMatchFinder *p, UInt32 historySize,
++    UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
++    ISzAlloc *alloc);
++void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc);
++void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems);
++void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue);
++
++UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *buffer, CLzRef *son,
++    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 _cutValue,
++    UInt32 *distances, UInt32 maxLen);
++
++/*
++Conditions:
++  Mf_GetNumAvailableBytes_Func must be called before each Mf_GetMatchLen_Func.
++  Mf_GetPointerToCurrentPos_Func's result must be used only before any other function
++*/
++
++typedef void (*Mf_Init_Func)(void *object);
++typedef Byte (*Mf_GetIndexByte_Func)(void *object, Int32 index);
++typedef UInt32 (*Mf_GetNumAvailableBytes_Func)(void *object);
++typedef const Byte * (*Mf_GetPointerToCurrentPos_Func)(void *object);
++typedef UInt32 (*Mf_GetMatches_Func)(void *object, UInt32 *distances);
++typedef void (*Mf_Skip_Func)(void *object, UInt32);
++
++typedef struct _IMatchFinder
++{
++  Mf_Init_Func Init;
++  Mf_GetIndexByte_Func GetIndexByte;
++  Mf_GetNumAvailableBytes_Func GetNumAvailableBytes;
++  Mf_GetPointerToCurrentPos_Func GetPointerToCurrentPos;
++  Mf_GetMatches_Func GetMatches;
++  Mf_Skip_Func Skip;
++} IMatchFinder;
++
++void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable);
++
++void MatchFinder_Init(CMatchFinder *p);
++UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
++UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
++void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
++void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif
+--- /dev/null
++++ b/include/linux/lzma/LzHash.h
+@@ -0,0 +1,54 @@
++/* LzHash.h -- HASH functions for LZ algorithms
++2009-02-07 : Igor Pavlov : Public domain */
++
++#ifndef __LZ_HASH_H
++#define __LZ_HASH_H
++
++#define kHash2Size (1 << 10)
++#define kHash3Size (1 << 16)
++#define kHash4Size (1 << 20)
++
++#define kFix3HashSize (kHash2Size)
++#define kFix4HashSize (kHash2Size + kHash3Size)
++#define kFix5HashSize (kHash2Size + kHash3Size + kHash4Size)
++
++#define HASH2_CALC hashValue = cur[0] | ((UInt32)cur[1] << 8);
++
++#define HASH3_CALC { \
++  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
++  hash2Value = temp & (kHash2Size - 1); \
++  hashValue = (temp ^ ((UInt32)cur[2] << 8)) & p->hashMask; }
++
++#define HASH4_CALC { \
++  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
++  hash2Value = temp & (kHash2Size - 1); \
++  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
++  hashValue = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & p->hashMask; }
++
++#define HASH5_CALC { \
++  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
++  hash2Value = temp & (kHash2Size - 1); \
++  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
++  hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)); \
++  hashValue = (hash4Value ^ (p->crc[cur[4]] << 3)) & p->hashMask; \
++  hash4Value &= (kHash4Size - 1); }
++
++/* #define HASH_ZIP_CALC hashValue = ((cur[0] | ((UInt32)cur[1] << 8)) ^ p->crc[cur[2]]) & 0xFFFF; */
++#define HASH_ZIP_CALC hashValue = ((cur[2] | ((UInt32)cur[0] << 8)) ^ p->crc[cur[1]]) & 0xFFFF;
++
++
++#define MT_HASH2_CALC \
++  hash2Value = (p->crc[cur[0]] ^ cur[1]) & (kHash2Size - 1);
++
++#define MT_HASH3_CALC { \
++  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
++  hash2Value = temp & (kHash2Size - 1); \
++  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); }
++
++#define MT_HASH4_CALC { \
++  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
++  hash2Value = temp & (kHash2Size - 1); \
++  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
++  hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & (kHash4Size - 1); }
++
++#endif
+--- /dev/null
++++ b/include/linux/lzma/LzmaDec.h
+@@ -0,0 +1,231 @@
++/* LzmaDec.h -- LZMA Decoder
++2009-02-07 : Igor Pavlov : Public domain */
++
++#ifndef __LZMA_DEC_H
++#define __LZMA_DEC_H
++
++#include "Types.h"
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/* #define _LZMA_PROB32 */
++/* _LZMA_PROB32 can increase the speed on some CPUs,
++   but memory usage for CLzmaDec::probs will be doubled in that case */
++
++#ifdef _LZMA_PROB32
++#define CLzmaProb UInt32
++#else
++#define CLzmaProb UInt16
++#endif
++
++
++/* ---------- LZMA Properties ---------- */
++
++#define LZMA_PROPS_SIZE 5
++
++typedef struct _CLzmaProps
++{
++  unsigned lc, lp, pb;
++  UInt32 dicSize;
++} CLzmaProps;
++
++/* LzmaProps_Decode - decodes properties
++Returns:
++  SZ_OK
++  SZ_ERROR_UNSUPPORTED - Unsupported properties
++*/
++
++SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size);
++
++
++/* ---------- LZMA Decoder state ---------- */
++
++/* LZMA_REQUIRED_INPUT_MAX = number of required input bytes for worst case.
++   Num bits = log2((2^11 / 31) ^ 22) + 26 < 134 + 26 = 160; */
++
++#define LZMA_REQUIRED_INPUT_MAX 20
++
++typedef struct
++{
++  CLzmaProps prop;
++  CLzmaProb *probs;
++  Byte *dic;
++  const Byte *buf;
++  UInt32 range, code;
++  SizeT dicPos;
++  SizeT dicBufSize;
++  UInt32 processedPos;
++  UInt32 checkDicSize;
++  unsigned state;
++  UInt32 reps[4];
++  unsigned remainLen;
++  int needFlush;
++  int needInitState;
++  UInt32 numProbs;
++  unsigned tempBufSize;
++  Byte tempBuf[LZMA_REQUIRED_INPUT_MAX];
++} CLzmaDec;
++
++#define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; }
++
++void LzmaDec_Init(CLzmaDec *p);
++
++/* There are two types of LZMA streams:
++     0) Stream with end mark. That end mark adds about 6 bytes to compressed size.
++     1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */
++
++typedef enum
++{
++  LZMA_FINISH_ANY,   /* finish at any point */
++  LZMA_FINISH_END    /* block must be finished at the end */
++} ELzmaFinishMode;
++
++/* ELzmaFinishMode has meaning only if the decoding reaches output limit !!!
++
++   You must use LZMA_FINISH_END, when you know that current output buffer
++   covers last bytes of block. In other cases you must use LZMA_FINISH_ANY.
++
++   If LZMA decoder sees end marker before reaching output limit, it returns SZ_OK,
++   and output value of destLen will be less than output buffer size limit.
++   You can check status result also.
++
++   You can use multiple checks to test data integrity after full decompression:
++     1) Check Result and "status" variable.
++     2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize.
++     3) Check that output(srcLen) = compressedSize, if you know real compressedSize.
++        You must use correct finish mode in that case. */
++
++typedef enum
++{
++  LZMA_STATUS_NOT_SPECIFIED,               /* use main error code instead */
++  LZMA_STATUS_FINISHED_WITH_MARK,          /* stream was finished with end mark. */
++  LZMA_STATUS_NOT_FINISHED,                /* stream was not finished */
++  LZMA_STATUS_NEEDS_MORE_INPUT,            /* you must provide more input bytes */
++  LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK  /* there is probability that stream was finished without end mark */
++} ELzmaStatus;
++
++/* ELzmaStatus is used only as output value for function call */
++
++
++/* ---------- Interfaces ---------- */
++
++/* There are 3 levels of interfaces:
++     1) Dictionary Interface
++     2) Buffer Interface
++     3) One Call Interface
++   You can select any of these interfaces, but don't mix functions from different
++   groups for same object. */
++
++
++/* There are two variants to allocate state for Dictionary Interface:
++     1) LzmaDec_Allocate / LzmaDec_Free
++     2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs
++   You can use variant 2, if you set dictionary buffer manually.
++   For Buffer Interface you must always use variant 1.
++
++LzmaDec_Allocate* can return:
++  SZ_OK
++  SZ_ERROR_MEM         - Memory allocation error
++  SZ_ERROR_UNSUPPORTED - Unsupported properties
++*/
++   
++SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc);
++void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc);
++
++SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc);
++void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc);
++
++/* ---------- Dictionary Interface ---------- */
++
++/* You can use it, if you want to eliminate the overhead for data copying from
++   dictionary to some other external buffer.
++   You must work with CLzmaDec variables directly in this interface.
++
++   STEPS:
++     LzmaDec_Constr()
++     LzmaDec_Allocate()
++     for (each new stream)
++     {
++       LzmaDec_Init()
++       while (it needs more decompression)
++       {
++         LzmaDec_DecodeToDic()
++         use data from CLzmaDec::dic and update CLzmaDec::dicPos
++       }
++     }
++     LzmaDec_Free()
++*/
++
++/* LzmaDec_DecodeToDic
++   
++   The decoding to internal dictionary buffer (CLzmaDec::dic).
++   You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!!
++
++finishMode:
++  It has meaning only if the decoding reaches output limit (dicLimit).
++  LZMA_FINISH_ANY - Decode just dicLimit bytes.
++  LZMA_FINISH_END - Stream must be finished after dicLimit.
++
++Returns:
++  SZ_OK
++    status:
++      LZMA_STATUS_FINISHED_WITH_MARK
++      LZMA_STATUS_NOT_FINISHED
++      LZMA_STATUS_NEEDS_MORE_INPUT
++      LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
++  SZ_ERROR_DATA - Data error
++*/
++
++SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit,
++    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
++
++
++/* ---------- Buffer Interface ---------- */
++
++/* It's zlib-like interface.
++   See LzmaDec_DecodeToDic description for information about STEPS and return results,
++   but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need
++   to work with CLzmaDec variables manually.
++
++finishMode:
++  It has meaning only if the decoding reaches output limit (*destLen).
++  LZMA_FINISH_ANY - Decode just destLen bytes.
++  LZMA_FINISH_END - Stream must be finished after (*destLen).
++*/
++
++SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen,
++    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
++
++
++/* ---------- One Call Interface ---------- */
++
++/* LzmaDecode
++
++finishMode:
++  It has meaning only if the decoding reaches output limit (*destLen).
++  LZMA_FINISH_ANY - Decode just destLen bytes.
++  LZMA_FINISH_END - Stream must be finished after (*destLen).
++
++Returns:
++  SZ_OK
++    status:
++      LZMA_STATUS_FINISHED_WITH_MARK
++      LZMA_STATUS_NOT_FINISHED
++      LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
++  SZ_ERROR_DATA - Data error
++  SZ_ERROR_MEM  - Memory allocation error
++  SZ_ERROR_UNSUPPORTED - Unsupported properties
++  SZ_ERROR_INPUT_EOF - It needs more bytes in input buffer (src).
++*/
++
++SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
++    const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
++    ELzmaStatus *status, ISzAlloc *alloc);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif
+--- /dev/null
++++ b/include/linux/lzma/LzmaEnc.h
+@@ -0,0 +1,80 @@
++/*  LzmaEnc.h -- LZMA Encoder
++2009-02-07 : Igor Pavlov : Public domain */
++
++#ifndef __LZMA_ENC_H
++#define __LZMA_ENC_H
++
++#include "Types.h"
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#define LZMA_PROPS_SIZE 5
++
++typedef struct _CLzmaEncProps
++{
++  int level;       /*  0 <= level <= 9 */
++  UInt32 dictSize; /* (1 << 12) <= dictSize <= (1 << 27) for 32-bit version
++                      (1 << 12) <= dictSize <= (1 << 30) for 64-bit version
++                       default = (1 << 24) */
++  int lc;          /* 0 <= lc <= 8, default = 3 */
++  int lp;          /* 0 <= lp <= 4, default = 0 */
++  int pb;          /* 0 <= pb <= 4, default = 2 */
++  int algo;        /* 0 - fast, 1 - normal, default = 1 */
++  int fb;          /* 5 <= fb <= 273, default = 32 */
++  int btMode;      /* 0 - hashChain Mode, 1 - binTree mode - normal, default = 1 */
++  int numHashBytes; /* 2, 3 or 4, default = 4 */
++  UInt32 mc;        /* 1 <= mc <= (1 << 30), default = 32 */
++  unsigned writeEndMark;  /* 0 - do not write EOPM, 1 - write EOPM, default = 0 */
++  int numThreads;  /* 1 or 2, default = 2 */
++} CLzmaEncProps;
++
++void LzmaEncProps_Init(CLzmaEncProps *p);
++void LzmaEncProps_Normalize(CLzmaEncProps *p);
++UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2);
++
++
++/* ---------- CLzmaEncHandle Interface ---------- */
++
++/* LzmaEnc_* functions can return the following exit codes:
++Returns:
++  SZ_OK           - OK
++  SZ_ERROR_MEM    - Memory allocation error
++  SZ_ERROR_PARAM  - Incorrect paramater in props
++  SZ_ERROR_WRITE  - Write callback error.
++  SZ_ERROR_PROGRESS - some break from progress callback
++  SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version)
++*/
++
++typedef void * CLzmaEncHandle;
++
++CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc);
++void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig);
++SRes LzmaEnc_SetProps(CLzmaEncHandle p, const CLzmaEncProps *props);
++SRes LzmaEnc_WriteProperties(CLzmaEncHandle p, Byte *properties, SizeT *size);
++SRes LzmaEnc_Encode(CLzmaEncHandle p, ISeqOutStream *outStream, ISeqInStream *inStream,
++    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
++SRes LzmaEnc_MemEncode(CLzmaEncHandle p, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
++    int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
++
++/* ---------- One Call Interface ---------- */
++
++/* LzmaEncode
++Return code:
++  SZ_OK               - OK
++  SZ_ERROR_MEM        - Memory allocation error
++  SZ_ERROR_PARAM      - Incorrect paramater
++  SZ_ERROR_OUTPUT_EOF - output buffer overflow
++  SZ_ERROR_THREAD     - errors in multithreading functions (only for Mt version)
++*/
++
++SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
++    const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
++    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif
+--- /dev/null
++++ b/include/linux/lzma/Types.h
+@@ -0,0 +1,226 @@
++/* Types.h -- Basic types
++2009-11-23 : Igor Pavlov : Public domain */
++
++#ifndef __7Z_TYPES_H
++#define __7Z_TYPES_H
++
++#include <stddef.h>
++
++#ifdef _WIN32
++#include <windows.h>
++#endif
++
++#ifndef EXTERN_C_BEGIN
++#ifdef __cplusplus
++#define EXTERN_C_BEGIN extern "C" {
++#define EXTERN_C_END }
++#else
++#define EXTERN_C_BEGIN
++#define EXTERN_C_END
++#endif
++#endif
++
++EXTERN_C_BEGIN
++
++#define SZ_OK 0
++
++#define SZ_ERROR_DATA 1
++#define SZ_ERROR_MEM 2
++#define SZ_ERROR_CRC 3
++#define SZ_ERROR_UNSUPPORTED 4
++#define SZ_ERROR_PARAM 5
++#define SZ_ERROR_INPUT_EOF 6
++#define SZ_ERROR_OUTPUT_EOF 7
++#define SZ_ERROR_READ 8
++#define SZ_ERROR_WRITE 9
++#define SZ_ERROR_PROGRESS 10
++#define SZ_ERROR_FAIL 11
++#define SZ_ERROR_THREAD 12
++
++#define SZ_ERROR_ARCHIVE 16
++#define SZ_ERROR_NO_ARCHIVE 17
++
++typedef int SRes;
++
++#ifdef _WIN32
++typedef DWORD WRes;
++#else
++typedef int WRes;
++#endif
++
++#ifndef RINOK
++#define RINOK(x) { int __result__ = (x); if (__result__ != 0) return __result__; }
++#endif
++
++typedef unsigned char Byte;
++typedef short Int16;
++typedef unsigned short UInt16;
++
++#ifdef _LZMA_UINT32_IS_ULONG
++typedef long Int32;
++typedef unsigned long UInt32;
++#else
++typedef int Int32;
++typedef unsigned int UInt32;
++#endif
++
++#ifdef _SZ_NO_INT_64
++
++/* define _SZ_NO_INT_64, if your compiler doesn't support 64-bit integers.
++   NOTES: Some code will work incorrectly in that case! */
++
++typedef long Int64;
++typedef unsigned long UInt64;
++
++#else
++
++#if defined(_MSC_VER) || defined(__BORLANDC__)
++typedef __int64 Int64;
++typedef unsigned __int64 UInt64;
++#else
++typedef long long int Int64;
++typedef unsigned long long int UInt64;
++#endif
++
++#endif
++
++#ifdef _LZMA_NO_SYSTEM_SIZE_T
++typedef UInt32 SizeT;
++#else
++typedef size_t SizeT;
++#endif
++
++typedef int Bool;
++#define True 1
++#define False 0
++
++
++#ifdef _WIN32
++#define MY_STD_CALL __stdcall
++#else
++#define MY_STD_CALL
++#endif
++
++#ifdef _MSC_VER
++
++#if _MSC_VER >= 1300
++#define MY_NO_INLINE __declspec(noinline)
++#else
++#define MY_NO_INLINE
++#endif
++
++#define MY_CDECL __cdecl
++#define MY_FAST_CALL __fastcall
++
++#else
++
++#define MY_CDECL
++#define MY_FAST_CALL
++
++#endif
++
++
++/* The following interfaces use first parameter as pointer to structure */
++
++typedef struct
++{
++  SRes (*Read)(void *p, void *buf, size_t *size);
++    /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
++       (output(*size) < input(*size)) is allowed */
++} ISeqInStream;
++
++/* it can return SZ_ERROR_INPUT_EOF */
++SRes SeqInStream_Read(ISeqInStream *stream, void *buf, size_t size);
++SRes SeqInStream_Read2(ISeqInStream *stream, void *buf, size_t size, SRes errorType);
++SRes SeqInStream_ReadByte(ISeqInStream *stream, Byte *buf);
++
++typedef struct
++{
++  size_t (*Write)(void *p, const void *buf, size_t size);
++    /* Returns: result - the number of actually written bytes.
++       (result < size) means error */
++} ISeqOutStream;
++
++typedef enum
++{
++  SZ_SEEK_SET = 0,
++  SZ_SEEK_CUR = 1,
++  SZ_SEEK_END = 2
++} ESzSeek;
++
++typedef struct
++{
++  SRes (*Read)(void *p, void *buf, size_t *size);  /* same as ISeqInStream::Read */
++  SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
++} ISeekInStream;
++
++typedef struct
++{
++  SRes (*Look)(void *p, void **buf, size_t *size);
++    /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
++       (output(*size) > input(*size)) is not allowed
++       (output(*size) < input(*size)) is allowed */
++  SRes (*Skip)(void *p, size_t offset);
++    /* offset must be <= output(*size) of Look */
++
++  SRes (*Read)(void *p, void *buf, size_t *size);
++    /* reads directly (without buffer). It's same as ISeqInStream::Read */
++  SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
++} ILookInStream;
++
++SRes LookInStream_LookRead(ILookInStream *stream, void *buf, size_t *size);
++SRes LookInStream_SeekTo(ILookInStream *stream, UInt64 offset);
++
++/* reads via ILookInStream::Read */
++SRes LookInStream_Read2(ILookInStream *stream, void *buf, size_t size, SRes errorType);
++SRes LookInStream_Read(ILookInStream *stream, void *buf, size_t size);
++
++#define LookToRead_BUF_SIZE (1 << 14)
++
++typedef struct
++{
++  ILookInStream s;
++  ISeekInStream *realStream;
++  size_t pos;
++  size_t size;
++  Byte buf[LookToRead_BUF_SIZE];
++} CLookToRead;
++
++void LookToRead_CreateVTable(CLookToRead *p, int lookahead);
++void LookToRead_Init(CLookToRead *p);
++
++typedef struct
++{
++  ISeqInStream s;
++  ILookInStream *realStream;
++} CSecToLook;
++
++void SecToLook_CreateVTable(CSecToLook *p);
++
++typedef struct
++{
++  ISeqInStream s;
++  ILookInStream *realStream;
++} CSecToRead;
++
++void SecToRead_CreateVTable(CSecToRead *p);
++
++typedef struct
++{
++  SRes (*Progress)(void *p, UInt64 inSize, UInt64 outSize);
++    /* Returns: result. (result != SZ_OK) means break.
++       Value (UInt64)(Int64)-1 for size means unknown value. */
++} ICompressProgress;
++
++typedef struct
++{
++  void *(*Alloc)(void *p, size_t size);
++  void (*Free)(void *p, void *address); /* address can be 0 */
++} ISzAlloc;
++
++#define IAlloc_Alloc(p, size) (p)->Alloc((p), size)
++#define IAlloc_Free(p, a) (p)->Free((p), a)
++
++EXTERN_C_END
++
++#endif
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -103,6 +103,12 @@ config LZO_COMPRESS
+ config LZO_DECOMPRESS
+ 	tristate
+ 
++config LZMA_COMPRESS
++    tristate
++
++config LZMA_DECOMPRESS
++    tristate
++
+ #
+ # These all provide a common interface (hence the apparent duplication with
+ # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.)
+--- a/lib/Makefile
++++ b/lib/Makefile
+@@ -2,6 +2,16 @@
+ # Makefile for some libs needed in the kernel.
+ #
+ 
++ifdef CONFIG_JFFS2_ZLIB
++	CONFIG_ZLIB_INFLATE:=y
++	CONFIG_ZLIB_DEFLATE:=y
++endif
++
++ifdef CONFIG_JFFS2_LZMA
++	CONFIG_LZMA_DECOMPRESS:=y
++	CONFIG_LZMA_COMPRESS:=y
++endif
++
+ ifdef CONFIG_FUNCTION_TRACER
+ ORIG_CFLAGS := $(KBUILD_CFLAGS)
+ KBUILD_CFLAGS = $(subst -pg,,$(ORIG_CFLAGS))
+@@ -65,6 +75,8 @@ obj-$(CONFIG_ZLIB_DEFLATE) += zlib_defla
+ obj-$(CONFIG_REED_SOLOMON) += reed_solomon/
+ obj-$(CONFIG_LZO_COMPRESS) += lzo/
+ obj-$(CONFIG_LZO_DECOMPRESS) += lzo/
++obj-$(CONFIG_LZMA_COMPRESS) += lzma/
++obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/
+ 
+ lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
+ lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
+--- /dev/null
++++ b/lib/lzma/LzFind.c
+@@ -0,0 +1,761 @@
++/* LzFind.c -- Match finder for LZ algorithms
++2009-04-22 : Igor Pavlov : Public domain */
++
++#include <string.h>
++
++#include "LzFind.h"
++#include "LzHash.h"
++
++#define kEmptyHashValue 0
++#define kMaxValForNormalize ((UInt32)0xFFFFFFFF)
++#define kNormalizeStepMin (1 << 10) /* it must be power of 2 */
++#define kNormalizeMask (~(kNormalizeStepMin - 1))
++#define kMaxHistorySize ((UInt32)3 << 30)
++
++#define kStartMaxLen 3
++
++static void LzInWindow_Free(CMatchFinder *p, ISzAlloc *alloc)
++{
++  if (!p->directInput)
++  {
++    alloc->Free(alloc, p->bufferBase);
++    p->bufferBase = 0;
++  }
++}
++
++/* keepSizeBefore + keepSizeAfter + keepSizeReserv must be < 4G) */
++
++static int LzInWindow_Create(CMatchFinder *p, UInt32 keepSizeReserv, ISzAlloc *alloc)
++{
++  UInt32 blockSize = p->keepSizeBefore + p->keepSizeAfter + keepSizeReserv;
++  if (p->directInput)
++  {
++    p->blockSize = blockSize;
++    return 1;
++  }
++  if (p->bufferBase == 0 || p->blockSize != blockSize)
++  {
++    LzInWindow_Free(p, alloc);
++    p->blockSize = blockSize;
++    p->bufferBase = (Byte *)alloc->Alloc(alloc, (size_t)blockSize);
++  }
++  return (p->bufferBase != 0);
++}
++
++Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
++Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
++
++UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
++
++void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
++{
++  p->posLimit -= subValue;
++  p->pos -= subValue;
++  p->streamPos -= subValue;
++}
++
++static void MatchFinder_ReadBlock(CMatchFinder *p)
++{
++  if (p->streamEndWasReached || p->result != SZ_OK)
++    return;
++  if (p->directInput)
++  {
++    UInt32 curSize = 0xFFFFFFFF - p->streamPos;
++    if (curSize > p->directInputRem)
++      curSize = (UInt32)p->directInputRem;
++    p->directInputRem -= curSize;
++    p->streamPos += curSize;
++    if (p->directInputRem == 0)
++      p->streamEndWasReached = 1;
++    return;
++  }
++  for (;;)
++  {
++    Byte *dest = p->buffer + (p->streamPos - p->pos);
++    size_t size = (p->bufferBase + p->blockSize - dest);
++    if (size == 0)
++      return;
++    p->result = p->stream->Read(p->stream, dest, &size);
++    if (p->result != SZ_OK)
++      return;
++    if (size == 0)
++    {
++      p->streamEndWasReached = 1;
++      return;
++    }
++    p->streamPos += (UInt32)size;
++    if (p->streamPos - p->pos > p->keepSizeAfter)
++      return;
++  }
++}
++
++void MatchFinder_MoveBlock(CMatchFinder *p)
++{
++  memmove(p->bufferBase,
++    p->buffer - p->keepSizeBefore,
++    (size_t)(p->streamPos - p->pos + p->keepSizeBefore));
++  p->buffer = p->bufferBase + p->keepSizeBefore;
++}
++
++int MatchFinder_NeedMove(CMatchFinder *p)
++{
++  if (p->directInput)
++    return 0;
++  /* if (p->streamEndWasReached) return 0; */
++  return ((size_t)(p->bufferBase + p->blockSize - p->buffer) <= p->keepSizeAfter);
++}
++
++void MatchFinder_ReadIfRequired(CMatchFinder *p)
++{
++  if (p->streamEndWasReached)
++    return;
++  if (p->keepSizeAfter >= p->streamPos - p->pos)
++    MatchFinder_ReadBlock(p);
++}
++
++static void MatchFinder_CheckAndMoveAndRead(CMatchFinder *p)
++{
++  if (MatchFinder_NeedMove(p))
++    MatchFinder_MoveBlock(p);
++  MatchFinder_ReadBlock(p);
++}
++
++static void MatchFinder_SetDefaultSettings(CMatchFinder *p)
++{
++  p->cutValue = 32;
++  p->btMode = 1;
++  p->numHashBytes = 4;
++  p->bigHash = 0;
++}
++
++#define kCrcPoly 0xEDB88320
++
++void MatchFinder_Construct(CMatchFinder *p)
++{
++  UInt32 i;
++  p->bufferBase = 0;
++  p->directInput = 0;
++  p->hash = 0;
++  MatchFinder_SetDefaultSettings(p);
++
++  for (i = 0; i < 256; i++)
++  {
++    UInt32 r = i;
++    int j;
++    for (j = 0; j < 8; j++)
++      r = (r >> 1) ^ (kCrcPoly & ~((r & 1) - 1));
++    p->crc[i] = r;
++  }
++}
++
++static void MatchFinder_FreeThisClassMemory(CMatchFinder *p, ISzAlloc *alloc)
++{
++  alloc->Free(alloc, p->hash);
++  p->hash = 0;
++}
++
++void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc)
++{
++  MatchFinder_FreeThisClassMemory(p, alloc);
++  LzInWindow_Free(p, alloc);
++}
++
++static CLzRef* AllocRefs(UInt32 num, ISzAlloc *alloc)
++{
++  size_t sizeInBytes = (size_t)num * sizeof(CLzRef);
++  if (sizeInBytes / sizeof(CLzRef) != num)
++    return 0;
++  return (CLzRef *)alloc->Alloc(alloc, sizeInBytes);
++}
++
++int MatchFinder_Create(CMatchFinder *p, UInt32 historySize,
++    UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
++    ISzAlloc *alloc)
++{
++  UInt32 sizeReserv;
++  if (historySize > kMaxHistorySize)
++  {
++    MatchFinder_Free(p, alloc);
++    return 0;
++  }
++  sizeReserv = historySize >> 1;
++  if (historySize > ((UInt32)2 << 30))
++    sizeReserv = historySize >> 2;
++  sizeReserv += (keepAddBufferBefore + matchMaxLen + keepAddBufferAfter) / 2 + (1 << 19);
++
++  p->keepSizeBefore = historySize + keepAddBufferBefore + 1;
++  p->keepSizeAfter = matchMaxLen + keepAddBufferAfter;
++  /* we need one additional byte, since we use MoveBlock after pos++ and before dictionary using */
++  if (LzInWindow_Create(p, sizeReserv, alloc))
++  {
++    UInt32 newCyclicBufferSize = historySize + 1;
++    UInt32 hs;
++    p->matchMaxLen = matchMaxLen;
++    {
++      p->fixedHashSize = 0;
++      if (p->numHashBytes == 2)
++        hs = (1 << 16) - 1;
++      else
++      {
++        hs = historySize - 1;
++        hs |= (hs >> 1);
++        hs |= (hs >> 2);
++        hs |= (hs >> 4);
++        hs |= (hs >> 8);
++        hs >>= 1;
++        hs |= 0xFFFF; /* don't change it! It's required for Deflate */
++        if (hs > (1 << 24))
++        {
++          if (p->numHashBytes == 3)
++            hs = (1 << 24) - 1;
++          else
++            hs >>= 1;
++        }
++      }
++      p->hashMask = hs;
++      hs++;
++      if (p->numHashBytes > 2) p->fixedHashSize += kHash2Size;
++      if (p->numHashBytes > 3) p->fixedHashSize += kHash3Size;
++      if (p->numHashBytes > 4) p->fixedHashSize += kHash4Size;
++      hs += p->fixedHashSize;
++    }
++
++    {
++      UInt32 prevSize = p->hashSizeSum + p->numSons;
++      UInt32 newSize;
++      p->historySize = historySize;
++      p->hashSizeSum = hs;
++      p->cyclicBufferSize = newCyclicBufferSize;
++      p->numSons = (p->btMode ? newCyclicBufferSize * 2 : newCyclicBufferSize);
++      newSize = p->hashSizeSum + p->numSons;
++      if (p->hash != 0 && prevSize == newSize)
++        return 1;
++      MatchFinder_FreeThisClassMemory(p, alloc);
++      p->hash = AllocRefs(newSize, alloc);
++      if (p->hash != 0)
++      {
++        p->son = p->hash + p->hashSizeSum;
++        return 1;
++      }
++    }
++  }
++  MatchFinder_Free(p, alloc);
++  return 0;
++}
++
++static void MatchFinder_SetLimits(CMatchFinder *p)
++{
++  UInt32 limit = kMaxValForNormalize - p->pos;
++  UInt32 limit2 = p->cyclicBufferSize - p->cyclicBufferPos;
++  if (limit2 < limit)
++    limit = limit2;
++  limit2 = p->streamPos - p->pos;
++  if (limit2 <= p->keepSizeAfter)
++  {
++    if (limit2 > 0)
++      limit2 = 1;
++  }
++  else
++    limit2 -= p->keepSizeAfter;
++  if (limit2 < limit)
++    limit = limit2;
++  {
++    UInt32 lenLimit = p->streamPos - p->pos;
++    if (lenLimit > p->matchMaxLen)
++      lenLimit = p->matchMaxLen;
++    p->lenLimit = lenLimit;
++  }
++  p->posLimit = p->pos + limit;
++}
++
++void MatchFinder_Init(CMatchFinder *p)
++{
++  UInt32 i;
++  for (i = 0; i < p->hashSizeSum; i++)
++    p->hash[i] = kEmptyHashValue;
++  p->cyclicBufferPos = 0;
++  p->buffer = p->bufferBase;
++  p->pos = p->streamPos = p->cyclicBufferSize;
++  p->result = SZ_OK;
++  p->streamEndWasReached = 0;
++  MatchFinder_ReadBlock(p);
++  MatchFinder_SetLimits(p);
++}
++
++static UInt32 MatchFinder_GetSubValue(CMatchFinder *p)
++{
++  return (p->pos - p->historySize - 1) & kNormalizeMask;
++}
++
++void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
++{
++  UInt32 i;
++  for (i = 0; i < numItems; i++)
++  {
++    UInt32 value = items[i];
++    if (value <= subValue)
++      value = kEmptyHashValue;
++    else
++      value -= subValue;
++    items[i] = value;
++  }
++}
++
++static void MatchFinder_Normalize(CMatchFinder *p)
++{
++  UInt32 subValue = MatchFinder_GetSubValue(p);
++  MatchFinder_Normalize3(subValue, p->hash, p->hashSizeSum + p->numSons);
++  MatchFinder_ReduceOffsets(p, subValue);
++}
++
++static void MatchFinder_CheckLimits(CMatchFinder *p)
++{
++  if (p->pos == kMaxValForNormalize)
++    MatchFinder_Normalize(p);
++  if (!p->streamEndWasReached && p->keepSizeAfter == p->streamPos - p->pos)
++    MatchFinder_CheckAndMoveAndRead(p);
++  if (p->cyclicBufferPos == p->cyclicBufferSize)
++    p->cyclicBufferPos = 0;
++  MatchFinder_SetLimits(p);
++}
++
++static UInt32 * Hc_GetMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
++    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
++    UInt32 *distances, UInt32 maxLen)
++{
++  son[_cyclicBufferPos] = curMatch;
++  for (;;)
++  {
++    UInt32 delta = pos - curMatch;
++    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
++      return distances;
++    {
++      const Byte *pb = cur - delta;
++      curMatch = son[_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)];
++      if (pb[maxLen] == cur[maxLen] && *pb == *cur)
++      {
++        UInt32 len = 0;
++        while (++len != lenLimit)
++          if (pb[len] != cur[len])
++            break;
++        if (maxLen < len)
++        {
++          *distances++ = maxLen = len;
++          *distances++ = delta - 1;
++          if (len == lenLimit)
++            return distances;
++        }
++      }
++    }
++  }
++}
++
++UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
++    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
++    UInt32 *distances, UInt32 maxLen)
++{
++  CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1;
++  CLzRef *ptr1 = son + (_cyclicBufferPos << 1);
++  UInt32 len0 = 0, len1 = 0;
++  for (;;)
++  {
++    UInt32 delta = pos - curMatch;
++    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
++    {
++      *ptr0 = *ptr1 = kEmptyHashValue;
++      return distances;
++    }
++    {
++      CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1);
++      const Byte *pb = cur - delta;
++      UInt32 len = (len0 < len1 ? len0 : len1);
++      if (pb[len] == cur[len])
++      {
++        if (++len != lenLimit && pb[len] == cur[len])
++          while (++len != lenLimit)
++            if (pb[len] != cur[len])
++              break;
++        if (maxLen < len)
++        {
++          *distances++ = maxLen = len;
++          *distances++ = delta - 1;
++          if (len == lenLimit)
++          {
++            *ptr1 = pair[0];
++            *ptr0 = pair[1];
++            return distances;
++          }
++        }
++      }
++      if (pb[len] < cur[len])
++      {
++        *ptr1 = curMatch;
++        ptr1 = pair + 1;
++        curMatch = *ptr1;
++        len1 = len;
++      }
++      else
++      {
++        *ptr0 = curMatch;
++        ptr0 = pair;
++        curMatch = *ptr0;
++        len0 = len;
++      }
++    }
++  }
++}
++
++static void SkipMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
++    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue)
++{
++  CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1;
++  CLzRef *ptr1 = son + (_cyclicBufferPos << 1);
++  UInt32 len0 = 0, len1 = 0;
++  for (;;)
++  {
++    UInt32 delta = pos - curMatch;
++    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
++    {
++      *ptr0 = *ptr1 = kEmptyHashValue;
++      return;
++    }
++    {
++      CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1);
++      const Byte *pb = cur - delta;
++      UInt32 len = (len0 < len1 ? len0 : len1);
++      if (pb[len] == cur[len])
++      {
++        while (++len != lenLimit)
++          if (pb[len] != cur[len])
++            break;
++        {
++          if (len == lenLimit)
++          {
++            *ptr1 = pair[0];
++            *ptr0 = pair[1];
++            return;
++          }
++        }
++      }
++      if (pb[len] < cur[len])
++      {
++        *ptr1 = curMatch;
++        ptr1 = pair + 1;
++        curMatch = *ptr1;
++        len1 = len;
++      }
++      else
++      {
++        *ptr0 = curMatch;
++        ptr0 = pair;
++        curMatch = *ptr0;
++        len0 = len;
++      }
++    }
++  }
++}
++
++#define MOVE_POS \
++  ++p->cyclicBufferPos; \
++  p->buffer++; \
++  if (++p->pos == p->posLimit) MatchFinder_CheckLimits(p);
++
++#define MOVE_POS_RET MOVE_POS return offset;
++
++static void MatchFinder_MovePos(CMatchFinder *p) { MOVE_POS; }
++
++#define GET_MATCHES_HEADER2(minLen, ret_op) \
++  UInt32 lenLimit; UInt32 hashValue; const Byte *cur; UInt32 curMatch; \
++  lenLimit = p->lenLimit; { if (lenLimit < minLen) { MatchFinder_MovePos(p); ret_op; }} \
++  cur = p->buffer;
++
++#define GET_MATCHES_HEADER(minLen) GET_MATCHES_HEADER2(minLen, return 0)
++#define SKIP_HEADER(minLen)        GET_MATCHES_HEADER2(minLen, continue)
++
++#define MF_PARAMS(p) p->pos, p->buffer, p->son, p->cyclicBufferPos, p->cyclicBufferSize, p->cutValue
++
++#define GET_MATCHES_FOOTER(offset, maxLen) \
++  offset = (UInt32)(GetMatchesSpec1(lenLimit, curMatch, MF_PARAMS(p), \
++  distances + offset, maxLen) - distances); MOVE_POS_RET;
++
++#define SKIP_FOOTER \
++  SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MOVE_POS;
++
++static UInt32 Bt2_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++  UInt32 offset;
++  GET_MATCHES_HEADER(2)
++  HASH2_CALC;
++  curMatch = p->hash[hashValue];
++  p->hash[hashValue] = p->pos;
++  offset = 0;
++  GET_MATCHES_FOOTER(offset, 1)
++}
++
++UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++  UInt32 offset;
++  GET_MATCHES_HEADER(3)
++  HASH_ZIP_CALC;
++  curMatch = p->hash[hashValue];
++  p->hash[hashValue] = p->pos;
++  offset = 0;
++  GET_MATCHES_FOOTER(offset, 2)
++}
++
++static UInt32 Bt3_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++  UInt32 hash2Value, delta2, maxLen, offset;
++  GET_MATCHES_HEADER(3)
++
++  HASH3_CALC;
++
++  delta2 = p->pos - p->hash[hash2Value];
++  curMatch = p->hash[kFix3HashSize + hashValue];
++  
++  p->hash[hash2Value] =
++  p->hash[kFix3HashSize + hashValue] = p->pos;
++
++
++  maxLen = 2;
++  offset = 0;
++  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
++  {
++    for (; maxLen != lenLimit; maxLen++)
++      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
++        break;
++    distances[0] = maxLen;
++    distances[1] = delta2 - 1;
++    offset = 2;
++    if (maxLen == lenLimit)
++    {
++      SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
++      MOVE_POS_RET;
++    }
++  }
++  GET_MATCHES_FOOTER(offset, maxLen)
++}
++
++static UInt32 Bt4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++  UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
++  GET_MATCHES_HEADER(4)
++
++  HASH4_CALC;
++
++  delta2 = p->pos - p->hash[                hash2Value];
++  delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
++  curMatch = p->hash[kFix4HashSize + hashValue];
++  
++  p->hash[                hash2Value] =
++  p->hash[kFix3HashSize + hash3Value] =
++  p->hash[kFix4HashSize + hashValue] = p->pos;
++
++  maxLen = 1;
++  offset = 0;
++  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
++  {
++    distances[0] = maxLen = 2;
++    distances[1] = delta2 - 1;
++    offset = 2;
++  }
++  if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
++  {
++    maxLen = 3;
++    distances[offset + 1] = delta3 - 1;
++    offset += 2;
++    delta2 = delta3;
++  }
++  if (offset != 0)
++  {
++    for (; maxLen != lenLimit; maxLen++)
++      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
++        break;
++    distances[offset - 2] = maxLen;
++    if (maxLen == lenLimit)
++    {
++      SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
++      MOVE_POS_RET;
++    }
++  }
++  if (maxLen < 3)
++    maxLen = 3;
++  GET_MATCHES_FOOTER(offset, maxLen)
++}
++
++static UInt32 Hc4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++  UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
++  GET_MATCHES_HEADER(4)
++
++  HASH4_CALC;
++
++  delta2 = p->pos - p->hash[                hash2Value];
++  delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
++  curMatch = p->hash[kFix4HashSize + hashValue];
++
++  p->hash[                hash2Value] =
++  p->hash[kFix3HashSize + hash3Value] =
++  p->hash[kFix4HashSize + hashValue] = p->pos;
++
++  maxLen = 1;
++  offset = 0;
++  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
++  {
++    distances[0] = maxLen = 2;
++    distances[1] = delta2 - 1;
++    offset = 2;
++  }
++  if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
++  {
++    maxLen = 3;
++    distances[offset + 1] = delta3 - 1;
++    offset += 2;
++    delta2 = delta3;
++  }
++  if (offset != 0)
++  {
++    for (; maxLen != lenLimit; maxLen++)
++      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
++        break;
++    distances[offset - 2] = maxLen;
++    if (maxLen == lenLimit)
++    {
++      p->son[p->cyclicBufferPos] = curMatch;
++      MOVE_POS_RET;
++    }
++  }
++  if (maxLen < 3)
++    maxLen = 3;
++  offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
++    distances + offset, maxLen) - (distances));
++  MOVE_POS_RET
++}
++
++UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++  UInt32 offset;
++  GET_MATCHES_HEADER(3)
++  HASH_ZIP_CALC;
++  curMatch = p->hash[hashValue];
++  p->hash[hashValue] = p->pos;
++  offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
++    distances, 2) - (distances));
++  MOVE_POS_RET
++}
++
++static void Bt2_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++  do
++  {
++    SKIP_HEADER(2)
++    HASH2_CALC;
++    curMatch = p->hash[hashValue];
++    p->hash[hashValue] = p->pos;
++    SKIP_FOOTER
++  }
++  while (--num != 0);
++}
++
++void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++  do
++  {
++    SKIP_HEADER(3)
++    HASH_ZIP_CALC;
++    curMatch = p->hash[hashValue];
++    p->hash[hashValue] = p->pos;
++    SKIP_FOOTER
++  }
++  while (--num != 0);
++}
++
++static void Bt3_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++  do
++  {
++    UInt32 hash2Value;
++    SKIP_HEADER(3)
++    HASH3_CALC;
++    curMatch = p->hash[kFix3HashSize + hashValue];
++    p->hash[hash2Value] =
++    p->hash[kFix3HashSize + hashValue] = p->pos;
++    SKIP_FOOTER
++  }
++  while (--num != 0);
++}
++
++static void Bt4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++  do
++  {
++    UInt32 hash2Value, hash3Value;
++    SKIP_HEADER(4)
++    HASH4_CALC;
++    curMatch = p->hash[kFix4HashSize + hashValue];
++    p->hash[                hash2Value] =
++    p->hash[kFix3HashSize + hash3Value] = p->pos;
++    p->hash[kFix4HashSize + hashValue] = p->pos;
++    SKIP_FOOTER
++  }
++  while (--num != 0);
++}
++
++static void Hc4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++  do
++  {
++    UInt32 hash2Value, hash3Value;
++    SKIP_HEADER(4)
++    HASH4_CALC;
++    curMatch = p->hash[kFix4HashSize + hashValue];
++    p->hash[                hash2Value] =
++    p->hash[kFix3HashSize + hash3Value] =
++    p->hash[kFix4HashSize + hashValue] = p->pos;
++    p->son[p->cyclicBufferPos] = curMatch;
++    MOVE_POS
++  }
++  while (--num != 0);
++}
++
++void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++  do
++  {
++    SKIP_HEADER(3)
++    HASH_ZIP_CALC;
++    curMatch = p->hash[hashValue];
++    p->hash[hashValue] = p->pos;
++    p->son[p->cyclicBufferPos] = curMatch;
++    MOVE_POS
++  }
++  while (--num != 0);
++}
++
++void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable)
++{
++  vTable->Init = (Mf_Init_Func)MatchFinder_Init;
++  vTable->GetIndexByte = (Mf_GetIndexByte_Func)MatchFinder_GetIndexByte;
++  vTable->GetNumAvailableBytes = (Mf_GetNumAvailableBytes_Func)MatchFinder_GetNumAvailableBytes;
++  vTable->GetPointerToCurrentPos = (Mf_GetPointerToCurrentPos_Func)MatchFinder_GetPointerToCurrentPos;
++  if (!p->btMode)
++  {
++    vTable->GetMatches = (Mf_GetMatches_Func)Hc4_MatchFinder_GetMatches;
++    vTable->Skip = (Mf_Skip_Func)Hc4_MatchFinder_Skip;
++  }
++  else if (p->numHashBytes == 2)
++  {
++    vTable->GetMatches = (Mf_GetMatches_Func)Bt2_MatchFinder_GetMatches;
++    vTable->Skip = (Mf_Skip_Func)Bt2_MatchFinder_Skip;
++  }
++  else if (p->numHashBytes == 3)
++  {
++    vTable->GetMatches = (Mf_GetMatches_Func)Bt3_MatchFinder_GetMatches;
++    vTable->Skip = (Mf_Skip_Func)Bt3_MatchFinder_Skip;
++  }
++  else
++  {
++    vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches;
++    vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip;
++  }
++}
+--- /dev/null
++++ b/lib/lzma/LzmaDec.c
+@@ -0,0 +1,999 @@
++/* LzmaDec.c -- LZMA Decoder
++2009-09-20 : Igor Pavlov : Public domain */
++
++#include "LzmaDec.h"
++
++#include <string.h>
++
++#define kNumTopBits 24
++#define kTopValue ((UInt32)1 << kNumTopBits)
++
++#define kNumBitModelTotalBits 11
++#define kBitModelTotal (1 << kNumBitModelTotalBits)
++#define kNumMoveBits 5
++
++#define RC_INIT_SIZE 5
++
++#define NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | (*buf++); }
++
++#define IF_BIT_0(p) ttt = *(p); NORMALIZE; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
++#define UPDATE_0(p) range = bound; *(p) = (CLzmaProb)(ttt + ((kBitModelTotal - ttt) >> kNumMoveBits));
++#define UPDATE_1(p) range -= bound; code -= bound; *(p) = (CLzmaProb)(ttt - (ttt >> kNumMoveBits));
++#define GET_BIT2(p, i, A0, A1) IF_BIT_0(p) \
++  { UPDATE_0(p); i = (i + i); A0; } else \
++  { UPDATE_1(p); i = (i + i) + 1; A1; }
++#define GET_BIT(p, i) GET_BIT2(p, i, ; , ;)
++
++#define TREE_GET_BIT(probs, i) { GET_BIT((probs + i), i); }
++#define TREE_DECODE(probs, limit, i) \
++  { i = 1; do { TREE_GET_BIT(probs, i); } while (i < limit); i -= limit; }
++
++/* #define _LZMA_SIZE_OPT */
++
++#ifdef _LZMA_SIZE_OPT
++#define TREE_6_DECODE(probs, i) TREE_DECODE(probs, (1 << 6), i)
++#else
++#define TREE_6_DECODE(probs, i) \
++  { i = 1; \
++  TREE_GET_BIT(probs, i); \
++  TREE_GET_BIT(probs, i); \
++  TREE_GET_BIT(probs, i); \
++  TREE_GET_BIT(probs, i); \
++  TREE_GET_BIT(probs, i); \
++  TREE_GET_BIT(probs, i); \
++  i -= 0x40; }
++#endif
++
++#define NORMALIZE_CHECK if (range < kTopValue) { if (buf >= bufLimit) return DUMMY_ERROR; range <<= 8; code = (code << 8) | (*buf++); }
++
++#define IF_BIT_0_CHECK(p) ttt = *(p); NORMALIZE_CHECK; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
++#define UPDATE_0_CHECK range = bound;
++#define UPDATE_1_CHECK range -= bound; code -= bound;
++#define GET_BIT2_CHECK(p, i, A0, A1) IF_BIT_0_CHECK(p) \
++  { UPDATE_0_CHECK; i = (i + i); A0; } else \
++  { UPDATE_1_CHECK; i = (i + i) + 1; A1; }
++#define GET_BIT_CHECK(p, i) GET_BIT2_CHECK(p, i, ; , ;)
++#define TREE_DECODE_CHECK(probs, limit, i) \
++  { i = 1; do { GET_BIT_CHECK(probs + i, i) } while (i < limit); i -= limit; }
++
++
++#define kNumPosBitsMax 4
++#define kNumPosStatesMax (1 << kNumPosBitsMax)
++
++#define kLenNumLowBits 3
++#define kLenNumLowSymbols (1 << kLenNumLowBits)
++#define kLenNumMidBits 3
++#define kLenNumMidSymbols (1 << kLenNumMidBits)
++#define kLenNumHighBits 8
++#define kLenNumHighSymbols (1 << kLenNumHighBits)
++
++#define LenChoice 0
++#define LenChoice2 (LenChoice + 1)
++#define LenLow (LenChoice2 + 1)
++#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
++#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
++#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
++
++
++#define kNumStates 12
++#define kNumLitStates 7
++
++#define kStartPosModelIndex 4
++#define kEndPosModelIndex 14
++#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
++
++#define kNumPosSlotBits 6
++#define kNumLenToPosStates 4
++
++#define kNumAlignBits 4
++#define kAlignTableSize (1 << kNumAlignBits)
++
++#define kMatchMinLen 2
++#define kMatchSpecLenStart (kMatchMinLen + kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols)
++
++#define IsMatch 0
++#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
++#define IsRepG0 (IsRep + kNumStates)
++#define IsRepG1 (IsRepG0 + kNumStates)
++#define IsRepG2 (IsRepG1 + kNumStates)
++#define IsRep0Long (IsRepG2 + kNumStates)
++#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
++#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
++#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
++#define LenCoder (Align + kAlignTableSize)
++#define RepLenCoder (LenCoder + kNumLenProbs)
++#define Literal (RepLenCoder + kNumLenProbs)
++
++#define LZMA_BASE_SIZE 1846
++#define LZMA_LIT_SIZE 768
++
++#define LzmaProps_GetNumProbs(p) ((UInt32)LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((p)->lc + (p)->lp)))
++
++#if Literal != LZMA_BASE_SIZE
++StopCompilingDueBUG
++#endif
++
++#define LZMA_DIC_MIN (1 << 12)
++
++/* First LZMA-symbol is always decoded.
++And it decodes new LZMA-symbols while (buf < bufLimit), but "buf" is without last normalization
++Out:
++  Result:
++    SZ_OK - OK
++    SZ_ERROR_DATA - Error
++  p->remainLen:
++    < kMatchSpecLenStart : normal remain
++    = kMatchSpecLenStart : finished
++    = kMatchSpecLenStart + 1 : Flush marker
++    = kMatchSpecLenStart + 2 : State Init Marker
++*/
++
++static int MY_FAST_CALL LzmaDec_DecodeReal(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
++{
++  CLzmaProb *probs = p->probs;
++
++  unsigned state = p->state;
++  UInt32 rep0 = p->reps[0], rep1 = p->reps[1], rep2 = p->reps[2], rep3 = p->reps[3];
++  unsigned pbMask = ((unsigned)1 << (p->prop.pb)) - 1;
++  unsigned lpMask = ((unsigned)1 << (p->prop.lp)) - 1;
++  unsigned lc = p->prop.lc;
++
++  Byte *dic = p->dic;
++  SizeT dicBufSize = p->dicBufSize;
++  SizeT dicPos = p->dicPos;
++  
++  UInt32 processedPos = p->processedPos;
++  UInt32 checkDicSize = p->checkDicSize;
++  unsigned len = 0;
++
++  const Byte *buf = p->buf;
++  UInt32 range = p->range;
++  UInt32 code = p->code;
++
++  do
++  {
++    CLzmaProb *prob;
++    UInt32 bound;
++    unsigned ttt;
++    unsigned posState = processedPos & pbMask;
++
++    prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
++    IF_BIT_0(prob)
++    {
++      unsigned symbol;
++      UPDATE_0(prob);
++      prob = probs + Literal;
++      if (checkDicSize != 0 || processedPos != 0)
++        prob += (LZMA_LIT_SIZE * (((processedPos & lpMask) << lc) +
++        (dic[(dicPos == 0 ? dicBufSize : dicPos) - 1] >> (8 - lc))));
++
++      if (state < kNumLitStates)
++      {
++        state -= (state < 4) ? state : 3;
++        symbol = 1;
++        do { GET_BIT(prob + symbol, symbol) } while (symbol < 0x100);
++      }
++      else
++      {
++        unsigned matchByte = p->dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
++        unsigned offs = 0x100;
++        state -= (state < 10) ? 3 : 6;
++        symbol = 1;
++        do
++        {
++          unsigned bit;
++          CLzmaProb *probLit;
++          matchByte <<= 1;
++          bit = (matchByte & offs);
++          probLit = prob + offs + bit + symbol;
++          GET_BIT2(probLit, symbol, offs &= ~bit, offs &= bit)
++        }
++        while (symbol < 0x100);
++      }
++      dic[dicPos++] = (Byte)symbol;
++      processedPos++;
++      continue;
++    }
++    else
++    {
++      UPDATE_1(prob);
++      prob = probs + IsRep + state;
++      IF_BIT_0(prob)
++      {
++        UPDATE_0(prob);
++        state += kNumStates;
++        prob = probs + LenCoder;
++      }
++      else
++      {
++        UPDATE_1(prob);
++        if (checkDicSize == 0 && processedPos == 0)
++          return SZ_ERROR_DATA;
++        prob = probs + IsRepG0 + state;
++        IF_BIT_0(prob)
++        {
++          UPDATE_0(prob);
++          prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
++          IF_BIT_0(prob)
++          {
++            UPDATE_0(prob);
++            dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
++            dicPos++;
++            processedPos++;
++            state = state < kNumLitStates ? 9 : 11;
++            continue;
++          }
++          UPDATE_1(prob);
++        }
++        else
++        {
++          UInt32 distance;
++          UPDATE_1(prob);
++          prob = probs + IsRepG1 + state;
++          IF_BIT_0(prob)
++          {
++            UPDATE_0(prob);
++            distance = rep1;
++          }
++          else
++          {
++            UPDATE_1(prob);
++            prob = probs + IsRepG2 + state;
++            IF_BIT_0(prob)
++            {
++              UPDATE_0(prob);
++              distance = rep2;
++            }
++            else
++            {
++              UPDATE_1(prob);
++              distance = rep3;
++              rep3 = rep2;
++            }
++            rep2 = rep1;
++          }
++          rep1 = rep0;
++          rep0 = distance;
++        }
++        state = state < kNumLitStates ? 8 : 11;
++        prob = probs + RepLenCoder;
++      }
++      {
++        unsigned limit, offset;
++        CLzmaProb *probLen = prob + LenChoice;
++        IF_BIT_0(probLen)
++        {
++          UPDATE_0(probLen);
++          probLen = prob + LenLow + (posState << kLenNumLowBits);
++          offset = 0;
++          limit = (1 << kLenNumLowBits);
++        }
++        else
++        {
++          UPDATE_1(probLen);
++          probLen = prob + LenChoice2;
++          IF_BIT_0(probLen)
++          {
++            UPDATE_0(probLen);
++            probLen = prob + LenMid + (posState << kLenNumMidBits);
++            offset = kLenNumLowSymbols;
++            limit = (1 << kLenNumMidBits);
++          }
++          else
++          {
++            UPDATE_1(probLen);
++            probLen = prob + LenHigh;
++            offset = kLenNumLowSymbols + kLenNumMidSymbols;
++            limit = (1 << kLenNumHighBits);
++          }
++        }
++        TREE_DECODE(probLen, limit, len);
++        len += offset;
++      }
++
++      if (state >= kNumStates)
++      {
++        UInt32 distance;
++        prob = probs + PosSlot +
++            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << kNumPosSlotBits);
++        TREE_6_DECODE(prob, distance);
++        if (distance >= kStartPosModelIndex)
++        {
++          unsigned posSlot = (unsigned)distance;
++          int numDirectBits = (int)(((distance >> 1) - 1));
++          distance = (2 | (distance & 1));
++          if (posSlot < kEndPosModelIndex)
++          {
++            distance <<= numDirectBits;
++            prob = probs + SpecPos + distance - posSlot - 1;
++            {
++              UInt32 mask = 1;
++              unsigned i = 1;
++              do
++              {
++                GET_BIT2(prob + i, i, ; , distance |= mask);
++                mask <<= 1;
++              }
++              while (--numDirectBits != 0);
++            }
++          }
++          else
++          {
++            numDirectBits -= kNumAlignBits;
++            do
++            {
++              NORMALIZE
++              range >>= 1;
++              
++              {
++                UInt32 t;
++                code -= range;
++                t = (0 - ((UInt32)code >> 31)); /* (UInt32)((Int32)code >> 31) */
++                distance = (distance << 1) + (t + 1);
++                code += range & t;
++              }
++              /*
++              distance <<= 1;
++              if (code >= range)
++              {
++                code -= range;
++                distance |= 1;
++              }
++              */
++            }
++            while (--numDirectBits != 0);
++            prob = probs + Align;
++            distance <<= kNumAlignBits;
++            {
++              unsigned i = 1;
++              GET_BIT2(prob + i, i, ; , distance |= 1);
++              GET_BIT2(prob + i, i, ; , distance |= 2);
++              GET_BIT2(prob + i, i, ; , distance |= 4);
++              GET_BIT2(prob + i, i, ; , distance |= 8);
++            }
++            if (distance == (UInt32)0xFFFFFFFF)
++            {
++              len += kMatchSpecLenStart;
++              state -= kNumStates;
++              break;
++            }
++          }
++        }
++        rep3 = rep2;
++        rep2 = rep1;
++        rep1 = rep0;
++        rep0 = distance + 1;
++        if (checkDicSize == 0)
++        {
++          if (distance >= processedPos)
++            return SZ_ERROR_DATA;
++        }
++        else if (distance >= checkDicSize)
++          return SZ_ERROR_DATA;
++        state = (state < kNumStates + kNumLitStates) ? kNumLitStates : kNumLitStates + 3;
++      }
++
++      len += kMatchMinLen;
++
++      if (limit == dicPos)
++        return SZ_ERROR_DATA;
++      {
++        SizeT rem = limit - dicPos;
++        unsigned curLen = ((rem < len) ? (unsigned)rem : len);
++        SizeT pos = (dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0);
++
++        processedPos += curLen;
++
++        len -= curLen;
++        if (pos + curLen <= dicBufSize)
++        {
++          Byte *dest = dic + dicPos;
++          ptrdiff_t src = (ptrdiff_t)pos - (ptrdiff_t)dicPos;
++          const Byte *lim = dest + curLen;
++          dicPos += curLen;
++          do
++            *(dest) = (Byte)*(dest + src);
++          while (++dest != lim);
++        }
++        else
++        {
++          do
++          {
++            dic[dicPos++] = dic[pos];
++            if (++pos == dicBufSize)
++              pos = 0;
++          }
++          while (--curLen != 0);
++        }
++      }
++    }
++  }
++  while (dicPos < limit && buf < bufLimit);
++  NORMALIZE;
++  p->buf = buf;
++  p->range = range;
++  p->code = code;
++  p->remainLen = len;
++  p->dicPos = dicPos;
++  p->processedPos = processedPos;
++  p->reps[0] = rep0;
++  p->reps[1] = rep1;
++  p->reps[2] = rep2;
++  p->reps[3] = rep3;
++  p->state = state;
++
++  return SZ_OK;
++}
++
++static void MY_FAST_CALL LzmaDec_WriteRem(CLzmaDec *p, SizeT limit)
++{
++  if (p->remainLen != 0 && p->remainLen < kMatchSpecLenStart)
++  {
++    Byte *dic = p->dic;
++    SizeT dicPos = p->dicPos;
++    SizeT dicBufSize = p->dicBufSize;
++    unsigned len = p->remainLen;
++    UInt32 rep0 = p->reps[0];
++    if (limit - dicPos < len)
++      len = (unsigned)(limit - dicPos);
++
++    if (p->checkDicSize == 0 && p->prop.dicSize - p->processedPos <= len)
++      p->checkDicSize = p->prop.dicSize;
++
++    p->processedPos += len;
++    p->remainLen -= len;
++    while (len-- != 0)
++    {
++      dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
++      dicPos++;
++    }
++    p->dicPos = dicPos;
++  }
++}
++
++static int MY_FAST_CALL LzmaDec_DecodeReal2(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
++{
++  do
++  {
++    SizeT limit2 = limit;
++    if (p->checkDicSize == 0)
++    {
++      UInt32 rem = p->prop.dicSize - p->processedPos;
++      if (limit - p->dicPos > rem)
++        limit2 = p->dicPos + rem;
++    }
++    RINOK(LzmaDec_DecodeReal(p, limit2, bufLimit));
++    if (p->processedPos >= p->prop.dicSize)
++      p->checkDicSize = p->prop.dicSize;
++    LzmaDec_WriteRem(p, limit);
++  }
++  while (p->dicPos < limit && p->buf < bufLimit && p->remainLen < kMatchSpecLenStart);
++
++  if (p->remainLen > kMatchSpecLenStart)
++  {
++    p->remainLen = kMatchSpecLenStart;
++  }
++  return 0;
++}
++
++typedef enum
++{
++  DUMMY_ERROR, /* unexpected end of input stream */
++  DUMMY_LIT,
++  DUMMY_MATCH,
++  DUMMY_REP
++} ELzmaDummy;
++
++static ELzmaDummy LzmaDec_TryDummy(const CLzmaDec *p, const Byte *buf, SizeT inSize)
++{
++  UInt32 range = p->range;
++  UInt32 code = p->code;
++  const Byte *bufLimit = buf + inSize;
++  CLzmaProb *probs = p->probs;
++  unsigned state = p->state;
++  ELzmaDummy res;
++
++  {
++    CLzmaProb *prob;
++    UInt32 bound;
++    unsigned ttt;
++    unsigned posState = (p->processedPos) & ((1 << p->prop.pb) - 1);
++
++    prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
++    IF_BIT_0_CHECK(prob)
++    {
++      UPDATE_0_CHECK
++
++      /* if (bufLimit - buf >= 7) return DUMMY_LIT; */
++
++      prob = probs + Literal;
++      if (p->checkDicSize != 0 || p->processedPos != 0)
++        prob += (LZMA_LIT_SIZE *
++          ((((p->processedPos) & ((1 << (p->prop.lp)) - 1)) << p->prop.lc) +
++          (p->dic[(p->dicPos == 0 ? p->dicBufSize : p->dicPos) - 1] >> (8 - p->prop.lc))));
++
++      if (state < kNumLitStates)
++      {
++        unsigned symbol = 1;
++        do { GET_BIT_CHECK(prob + symbol, symbol) } while (symbol < 0x100);
++      }
++      else
++      {
++        unsigned matchByte = p->dic[p->dicPos - p->reps[0] +
++            ((p->dicPos < p->reps[0]) ? p->dicBufSize : 0)];
++        unsigned offs = 0x100;
++        unsigned symbol = 1;
++        do
++        {
++          unsigned bit;
++          CLzmaProb *probLit;
++          matchByte <<= 1;
++          bit = (matchByte & offs);
++          probLit = prob + offs + bit + symbol;
++          GET_BIT2_CHECK(probLit, symbol, offs &= ~bit, offs &= bit)
++        }
++        while (symbol < 0x100);
++      }
++      res = DUMMY_LIT;
++    }
++    else
++    {
++      unsigned len;
++      UPDATE_1_CHECK;
++
++      prob = probs + IsRep + state;
++      IF_BIT_0_CHECK(prob)
++      {
++        UPDATE_0_CHECK;
++        state = 0;
++        prob = probs + LenCoder;
++        res = DUMMY_MATCH;
++      }
++      else
++      {
++        UPDATE_1_CHECK;
++        res = DUMMY_REP;
++        prob = probs + IsRepG0 + state;
++        IF_BIT_0_CHECK(prob)
++        {
++          UPDATE_0_CHECK;
++          prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
++          IF_BIT_0_CHECK(prob)
++          {
++            UPDATE_0_CHECK;
++            NORMALIZE_CHECK;
++            return DUMMY_REP;
++          }
++          else
++          {
++            UPDATE_1_CHECK;
++          }
++        }
++        else
++        {
++          UPDATE_1_CHECK;
++          prob = probs + IsRepG1 + state;
++          IF_BIT_0_CHECK(prob)
++          {
++            UPDATE_0_CHECK;
++          }
++          else
++          {
++            UPDATE_1_CHECK;
++            prob = probs + IsRepG2 + state;
++            IF_BIT_0_CHECK(prob)
++            {
++              UPDATE_0_CHECK;
++            }
++            else
++            {
++              UPDATE_1_CHECK;
++            }
++          }
++        }
++        state = kNumStates;
++        prob = probs + RepLenCoder;
++      }
++      {
++        unsigned limit, offset;
++        CLzmaProb *probLen = prob + LenChoice;
++        IF_BIT_0_CHECK(probLen)
++        {
++          UPDATE_0_CHECK;
++          probLen = prob + LenLow + (posState << kLenNumLowBits);
++          offset = 0;
++          limit = 1 << kLenNumLowBits;
++        }
++        else
++        {
++          UPDATE_1_CHECK;
++          probLen = prob + LenChoice2;
++          IF_BIT_0_CHECK(probLen)
++          {
++            UPDATE_0_CHECK;
++            probLen = prob + LenMid + (posState << kLenNumMidBits);
++            offset = kLenNumLowSymbols;
++            limit = 1 << kLenNumMidBits;
++          }
++          else
++          {
++            UPDATE_1_CHECK;
++            probLen = prob + LenHigh;
++            offset = kLenNumLowSymbols + kLenNumMidSymbols;
++            limit = 1 << kLenNumHighBits;
++          }
++        }
++        TREE_DECODE_CHECK(probLen, limit, len);
++        len += offset;
++      }
++
++      if (state < 4)
++      {
++        unsigned posSlot;
++        prob = probs + PosSlot +
++            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
++            kNumPosSlotBits);
++        TREE_DECODE_CHECK(prob, 1 << kNumPosSlotBits, posSlot);
++        if (posSlot >= kStartPosModelIndex)
++        {
++          int numDirectBits = ((posSlot >> 1) - 1);
++
++          /* if (bufLimit - buf >= 8) return DUMMY_MATCH; */
++
++          if (posSlot < kEndPosModelIndex)
++          {
++            prob = probs + SpecPos + ((2 | (posSlot & 1)) << numDirectBits) - posSlot - 1;
++          }
++          else
++          {
++            numDirectBits -= kNumAlignBits;
++            do
++            {
++              NORMALIZE_CHECK
++              range >>= 1;
++              code -= range & (((code - range) >> 31) - 1);
++              /* if (code >= range) code -= range; */
++            }
++            while (--numDirectBits != 0);
++            prob = probs + Align;
++            numDirectBits = kNumAlignBits;
++          }
++          {
++            unsigned i = 1;
++            do
++            {
++              GET_BIT_CHECK(prob + i, i);
++            }
++            while (--numDirectBits != 0);
++          }
++        }
++      }
++    }
++  }
++  NORMALIZE_CHECK;
++  return res;
++}
++
++
++static void LzmaDec_InitRc(CLzmaDec *p, const Byte *data)
++{
++  p->code = ((UInt32)data[1] << 24) | ((UInt32)data[2] << 16) | ((UInt32)data[3] << 8) | ((UInt32)data[4]);
++  p->range = 0xFFFFFFFF;
++  p->needFlush = 0;
++}
++
++void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
++{
++  p->needFlush = 1;
++  p->remainLen = 0;
++  p->tempBufSize = 0;
++
++  if (initDic)
++  {
++    p->processedPos = 0;
++    p->checkDicSize = 0;
++    p->needInitState = 1;
++  }
++  if (initState)
++    p->needInitState = 1;
++}
++
++void LzmaDec_Init(CLzmaDec *p)
++{
++  p->dicPos = 0;
++  LzmaDec_InitDicAndState(p, True, True);
++}
++
++static void LzmaDec_InitStateReal(CLzmaDec *p)
++{
++  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (p->prop.lc + p->prop.lp));
++  UInt32 i;
++  CLzmaProb *probs = p->probs;
++  for (i = 0; i < numProbs; i++)
++    probs[i] = kBitModelTotal >> 1;
++  p->reps[0] = p->reps[1] = p->reps[2] = p->reps[3] = 1;
++  p->state = 0;
++  p->needInitState = 0;
++}
++
++SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
++    ELzmaFinishMode finishMode, ELzmaStatus *status)
++{
++  SizeT inSize = *srcLen;
++  (*srcLen) = 0;
++  LzmaDec_WriteRem(p, dicLimit);
++  
++  *status = LZMA_STATUS_NOT_SPECIFIED;
++
++  while (p->remainLen != kMatchSpecLenStart)
++  {
++      int checkEndMarkNow;
++
++      if (p->needFlush != 0)
++      {
++        for (; inSize > 0 && p->tempBufSize < RC_INIT_SIZE; (*srcLen)++, inSize--)
++          p->tempBuf[p->tempBufSize++] = *src++;
++        if (p->tempBufSize < RC_INIT_SIZE)
++        {
++          *status = LZMA_STATUS_NEEDS_MORE_INPUT;
++          return SZ_OK;
++        }
++        if (p->tempBuf[0] != 0)
++          return SZ_ERROR_DATA;
++
++        LzmaDec_InitRc(p, p->tempBuf);
++        p->tempBufSize = 0;
++      }
++
++      checkEndMarkNow = 0;
++      if (p->dicPos >= dicLimit)
++      {
++        if (p->remainLen == 0 && p->code == 0)
++        {
++          *status = LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK;
++          return SZ_OK;
++        }
++        if (finishMode == LZMA_FINISH_ANY)
++        {
++          *status = LZMA_STATUS_NOT_FINISHED;
++          return SZ_OK;
++        }
++        if (p->remainLen != 0)
++        {
++          *status = LZMA_STATUS_NOT_FINISHED;
++          return SZ_ERROR_DATA;
++        }
++        checkEndMarkNow = 1;
++      }
++
++      if (p->needInitState)
++        LzmaDec_InitStateReal(p);
++  
++      if (p->tempBufSize == 0)
++      {
++        SizeT processed;
++        const Byte *bufLimit;
++        if (inSize < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
++        {
++          int dummyRes = LzmaDec_TryDummy(p, src, inSize);
++          if (dummyRes == DUMMY_ERROR)
++          {
++            memcpy(p->tempBuf, src, inSize);
++            p->tempBufSize = (unsigned)inSize;
++            (*srcLen) += inSize;
++            *status = LZMA_STATUS_NEEDS_MORE_INPUT;
++            return SZ_OK;
++          }
++          if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
++          {
++            *status = LZMA_STATUS_NOT_FINISHED;
++            return SZ_ERROR_DATA;
++          }
++          bufLimit = src;
++        }
++        else
++          bufLimit = src + inSize - LZMA_REQUIRED_INPUT_MAX;
++        p->buf = src;
++        if (LzmaDec_DecodeReal2(p, dicLimit, bufLimit) != 0)
++          return SZ_ERROR_DATA;
++        processed = (SizeT)(p->buf - src);
++        (*srcLen) += processed;
++        src += processed;
++        inSize -= processed;
++      }
++      else
++      {
++        unsigned rem = p->tempBufSize, lookAhead = 0;
++        while (rem < LZMA_REQUIRED_INPUT_MAX && lookAhead < inSize)
++          p->tempBuf[rem++] = src[lookAhead++];
++        p->tempBufSize = rem;
++        if (rem < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
++        {
++          int dummyRes = LzmaDec_TryDummy(p, p->tempBuf, rem);
++          if (dummyRes == DUMMY_ERROR)
++          {
++            (*srcLen) += lookAhead;
++            *status = LZMA_STATUS_NEEDS_MORE_INPUT;
++            return SZ_OK;
++          }
++          if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
++          {
++            *status = LZMA_STATUS_NOT_FINISHED;
++            return SZ_ERROR_DATA;
++          }
++        }
++        p->buf = p->tempBuf;
++        if (LzmaDec_DecodeReal2(p, dicLimit, p->buf) != 0)
++          return SZ_ERROR_DATA;
++        lookAhead -= (rem - (unsigned)(p->buf - p->tempBuf));
++        (*srcLen) += lookAhead;
++        src += lookAhead;
++        inSize -= lookAhead;
++        p->tempBufSize = 0;
++      }
++  }
++  if (p->code == 0)
++    *status = LZMA_STATUS_FINISHED_WITH_MARK;
++  return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA;
++}
++
++SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status)
++{
++  SizeT outSize = *destLen;
++  SizeT inSize = *srcLen;
++  *srcLen = *destLen = 0;
++  for (;;)
++  {
++    SizeT inSizeCur = inSize, outSizeCur, dicPos;
++    ELzmaFinishMode curFinishMode;
++    SRes res;
++    if (p->dicPos == p->dicBufSize)
++      p->dicPos = 0;
++    dicPos = p->dicPos;
++    if (outSize > p->dicBufSize - dicPos)
++    {
++      outSizeCur = p->dicBufSize;
++      curFinishMode = LZMA_FINISH_ANY;
++    }
++    else
++    {
++      outSizeCur = dicPos + outSize;
++      curFinishMode = finishMode;
++    }
++
++    res = LzmaDec_DecodeToDic(p, outSizeCur, src, &inSizeCur, curFinishMode, status);
++    src += inSizeCur;
++    inSize -= inSizeCur;
++    *srcLen += inSizeCur;
++    outSizeCur = p->dicPos - dicPos;
++    memcpy(dest, p->dic + dicPos, outSizeCur);
++    dest += outSizeCur;
++    outSize -= outSizeCur;
++    *destLen += outSizeCur;
++    if (res != 0)
++      return res;
++    if (outSizeCur == 0 || outSize == 0)
++      return SZ_OK;
++  }
++}
++
++void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
++{
++  alloc->Free(alloc, p->probs);
++  p->probs = 0;
++}
++
++static void LzmaDec_FreeDict(CLzmaDec *p, ISzAlloc *alloc)
++{
++  alloc->Free(alloc, p->dic);
++  p->dic = 0;
++}
++
++void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc)
++{
++  LzmaDec_FreeProbs(p, alloc);
++  LzmaDec_FreeDict(p, alloc);
++}
++
++SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
++{
++  UInt32 dicSize;
++  Byte d;
++  
++  if (size < LZMA_PROPS_SIZE)
++    return SZ_ERROR_UNSUPPORTED;
++  else
++    dicSize = data[1] | ((UInt32)data[2] << 8) | ((UInt32)data[3] << 16) | ((UInt32)data[4] << 24);
++ 
++  if (dicSize < LZMA_DIC_MIN)
++    dicSize = LZMA_DIC_MIN;
++  p->dicSize = dicSize;
++
++  d = data[0];
++  if (d >= (9 * 5 * 5))
++    return SZ_ERROR_UNSUPPORTED;
++
++  p->lc = d % 9;
++  d /= 9;
++  p->pb = d / 5;
++  p->lp = d % 5;
++
++  return SZ_OK;
++}
++
++static SRes LzmaDec_AllocateProbs2(CLzmaDec *p, const CLzmaProps *propNew, ISzAlloc *alloc)
++{
++  UInt32 numProbs = LzmaProps_GetNumProbs(propNew);
++  if (p->probs == 0 || numProbs != p->numProbs)
++  {
++    LzmaDec_FreeProbs(p, alloc);
++    p->probs = (CLzmaProb *)alloc->Alloc(alloc, numProbs * sizeof(CLzmaProb));
++    p->numProbs = numProbs;
++    if (p->probs == 0)
++      return SZ_ERROR_MEM;
++  }
++  return SZ_OK;
++}
++
++SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
++{
++  CLzmaProps propNew;
++  RINOK(LzmaProps_Decode(&propNew, props, propsSize));
++  RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
++  p->prop = propNew;
++  return SZ_OK;
++}
++
++SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
++{
++  CLzmaProps propNew;
++  SizeT dicBufSize;
++  RINOK(LzmaProps_Decode(&propNew, props, propsSize));
++  RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
++  dicBufSize = propNew.dicSize;
++  if (p->dic == 0 || dicBufSize != p->dicBufSize)
++  {
++    LzmaDec_FreeDict(p, alloc);
++    p->dic = (Byte *)alloc->Alloc(alloc, dicBufSize);
++    if (p->dic == 0)
++    {
++      LzmaDec_FreeProbs(p, alloc);
++      return SZ_ERROR_MEM;
++    }
++  }
++  p->dicBufSize = dicBufSize;
++  p->prop = propNew;
++  return SZ_OK;
++}
++
++SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
++    const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
++    ELzmaStatus *status, ISzAlloc *alloc)
++{
++  CLzmaDec p;
++  SRes res;
++  SizeT inSize = *srcLen;
++  SizeT outSize = *destLen;
++  *srcLen = *destLen = 0;
++  if (inSize < RC_INIT_SIZE)
++    return SZ_ERROR_INPUT_EOF;
++
++  LzmaDec_Construct(&p);
++  res = LzmaDec_AllocateProbs(&p, propData, propSize, alloc);
++  if (res != 0)
++    return res;
++  p.dic = dest;
++  p.dicBufSize = outSize;
++
++  LzmaDec_Init(&p);
++  
++  *srcLen = inSize;
++  res = LzmaDec_DecodeToDic(&p, outSize, src, srcLen, finishMode, status);
++
++  if (res == SZ_OK && *status == LZMA_STATUS_NEEDS_MORE_INPUT)
++    res = SZ_ERROR_INPUT_EOF;
++
++  (*destLen) = p.dicPos;
++  LzmaDec_FreeProbs(&p, alloc);
++  return res;
++}
+--- /dev/null
++++ b/lib/lzma/LzmaEnc.c
+@@ -0,0 +1,2271 @@
++/* LzmaEnc.c -- LZMA Encoder
++2009-11-24 : Igor Pavlov : Public domain */
++
++#include <string.h>
++
++/* #define SHOW_STAT */
++/* #define SHOW_STAT2 */
++
++#if defined(SHOW_STAT) || defined(SHOW_STAT2)
++#include <stdio.h>
++#endif
++
++#include "LzmaEnc.h"
++
++/* disable MT */
++#define _7ZIP_ST
++
++#include "LzFind.h"
++#ifndef _7ZIP_ST
++#include "LzFindMt.h"
++#endif
++
++#ifdef SHOW_STAT
++static int ttt = 0;
++#endif
++
++#define kBlockSizeMax ((1 << LZMA_NUM_BLOCK_SIZE_BITS) - 1)
++
++#define kBlockSize (9 << 10)
++#define kUnpackBlockSize (1 << 18)
++#define kMatchArraySize (1 << 21)
++#define kMatchRecordMaxSize ((LZMA_MATCH_LEN_MAX * 2 + 3) * LZMA_MATCH_LEN_MAX)
++
++#define kNumMaxDirectBits (31)
++
++#define kNumTopBits 24
++#define kTopValue ((UInt32)1 << kNumTopBits)
++
++#define kNumBitModelTotalBits 11
++#define kBitModelTotal (1 << kNumBitModelTotalBits)
++#define kNumMoveBits 5
++#define kProbInitValue (kBitModelTotal >> 1)
++
++#define kNumMoveReducingBits 4
++#define kNumBitPriceShiftBits 4
++#define kBitPrice (1 << kNumBitPriceShiftBits)
++
++void LzmaEncProps_Init(CLzmaEncProps *p)
++{
++  p->level = 5;
++  p->dictSize = p->mc = 0;
++  p->lc = p->lp = p->pb = p->algo = p->fb = p->btMode = p->numHashBytes = p->numThreads = -1;
++  p->writeEndMark = 0;
++}
++
++void LzmaEncProps_Normalize(CLzmaEncProps *p)
++{
++  int level = p->level;
++  if (level < 0) level = 5;
++  p->level = level;
++  if (p->dictSize == 0) p->dictSize = (level <= 5 ? (1 << (level * 2 + 14)) : (level == 6 ? (1 << 25) : (1 << 26)));
++  if (p->lc < 0) p->lc = 3;
++  if (p->lp < 0) p->lp = 0;
++  if (p->pb < 0) p->pb = 2;
++  if (p->algo < 0) p->algo = (level < 5 ? 0 : 1);
++  if (p->fb < 0) p->fb = (level < 7 ? 32 : 64);
++  if (p->btMode < 0) p->btMode = (p->algo == 0 ? 0 : 1);
++  if (p->numHashBytes < 0) p->numHashBytes = 4;
++  if (p->mc == 0)  p->mc = (16 + (p->fb >> 1)) >> (p->btMode ? 0 : 1);
++  if (p->numThreads < 0)
++    p->numThreads =
++      #ifndef _7ZIP_ST
++      ((p->btMode && p->algo) ? 2 : 1);
++      #else
++      1;
++      #endif
++}
++
++UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
++{
++  CLzmaEncProps props = *props2;
++  LzmaEncProps_Normalize(&props);
++  return props.dictSize;
++}
++
++/* #define LZMA_LOG_BSR */
++/* Define it for Intel's CPU */
++
++
++#ifdef LZMA_LOG_BSR
++
++#define kDicLogSizeMaxCompress 30
++
++#define BSR2_RET(pos, res) { unsigned long i; _BitScanReverse(&i, (pos)); res = (i + i) + ((pos >> (i - 1)) & 1); }
++
++UInt32 GetPosSlot1(UInt32 pos)
++{
++  UInt32 res;
++  BSR2_RET(pos, res);
++  return res;
++}
++#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); }
++#define GetPosSlot(pos, res) { if (pos < 2) res = pos; else BSR2_RET(pos, res); }
++
++#else
++
++#define kNumLogBits (9 + (int)sizeof(size_t) / 2)
++#define kDicLogSizeMaxCompress ((kNumLogBits - 1) * 2 + 7)
++
++void LzmaEnc_FastPosInit(Byte *g_FastPos)
++{
++  int c = 2, slotFast;
++  g_FastPos[0] = 0;
++  g_FastPos[1] = 1;
++  
++  for (slotFast = 2; slotFast < kNumLogBits * 2; slotFast++)
++  {
++    UInt32 k = (1 << ((slotFast >> 1) - 1));
++    UInt32 j;
++    for (j = 0; j < k; j++, c++)
++      g_FastPos[c] = (Byte)slotFast;
++  }
++}
++
++#define BSR2_RET(pos, res) { UInt32 i = 6 + ((kNumLogBits - 1) & \
++  (0 - (((((UInt32)1 << (kNumLogBits + 6)) - 1) - pos) >> 31))); \
++  res = p->g_FastPos[pos >> i] + (i * 2); }
++/*
++#define BSR2_RET(pos, res) { res = (pos < (1 << (kNumLogBits + 6))) ? \
++  p->g_FastPos[pos >> 6] + 12 : \
++  p->g_FastPos[pos >> (6 + kNumLogBits - 1)] + (6 + (kNumLogBits - 1)) * 2; }
++*/
++
++#define GetPosSlot1(pos) p->g_FastPos[pos]
++#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); }
++#define GetPosSlot(pos, res) { if (pos < kNumFullDistances) res = p->g_FastPos[pos]; else BSR2_RET(pos, res); }
++
++#endif
++
++
++#define LZMA_NUM_REPS 4
++
++typedef unsigned CState;
++
++typedef struct
++{
++  UInt32 price;
++
++  CState state;
++  int prev1IsChar;
++  int prev2;
++
++  UInt32 posPrev2;
++  UInt32 backPrev2;
++
++  UInt32 posPrev;
++  UInt32 backPrev;
++  UInt32 backs[LZMA_NUM_REPS];
++} COptimal;
++
++#define kNumOpts (1 << 12)
++
++#define kNumLenToPosStates 4
++#define kNumPosSlotBits 6
++#define kDicLogSizeMin 0
++#define kDicLogSizeMax 32
++#define kDistTableSizeMax (kDicLogSizeMax * 2)
++
++
++#define kNumAlignBits 4
++#define kAlignTableSize (1 << kNumAlignBits)
++#define kAlignMask (kAlignTableSize - 1)
++
++#define kStartPosModelIndex 4
++#define kEndPosModelIndex 14
++#define kNumPosModels (kEndPosModelIndex - kStartPosModelIndex)
++
++#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
++
++#ifdef _LZMA_PROB32
++#define CLzmaProb UInt32
++#else
++#define CLzmaProb UInt16
++#endif
++
++#define LZMA_PB_MAX 4
++#define LZMA_LC_MAX 8
++#define LZMA_LP_MAX 4
++
++#define LZMA_NUM_PB_STATES_MAX (1 << LZMA_PB_MAX)
++
++
++#define kLenNumLowBits 3
++#define kLenNumLowSymbols (1 << kLenNumLowBits)
++#define kLenNumMidBits 3
++#define kLenNumMidSymbols (1 << kLenNumMidBits)
++#define kLenNumHighBits 8
++#define kLenNumHighSymbols (1 << kLenNumHighBits)
++
++#define kLenNumSymbolsTotal (kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols)
++
++#define LZMA_MATCH_LEN_MIN 2
++#define LZMA_MATCH_LEN_MAX (LZMA_MATCH_LEN_MIN + kLenNumSymbolsTotal - 1)
++
++#define kNumStates 12
++
++typedef struct
++{
++  CLzmaProb choice;
++  CLzmaProb choice2;
++  CLzmaProb low[LZMA_NUM_PB_STATES_MAX << kLenNumLowBits];
++  CLzmaProb mid[LZMA_NUM_PB_STATES_MAX << kLenNumMidBits];
++  CLzmaProb high[kLenNumHighSymbols];
++} CLenEnc;
++
++typedef struct
++{
++  CLenEnc p;
++  UInt32 prices[LZMA_NUM_PB_STATES_MAX][kLenNumSymbolsTotal];
++  UInt32 tableSize;
++  UInt32 counters[LZMA_NUM_PB_STATES_MAX];
++} CLenPriceEnc;
++
++typedef struct
++{
++  UInt32 range;
++  Byte cache;
++  UInt64 low;
++  UInt64 cacheSize;
++  Byte *buf;
++  Byte *bufLim;
++  Byte *bufBase;
++  ISeqOutStream *outStream;
++  UInt64 processed;
++  SRes res;
++} CRangeEnc;
++
++typedef struct
++{
++  CLzmaProb *litProbs;
++
++  CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX];
++  CLzmaProb isRep[kNumStates];
++  CLzmaProb isRepG0[kNumStates];
++  CLzmaProb isRepG1[kNumStates];
++  CLzmaProb isRepG2[kNumStates];
++  CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX];
++
++  CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits];
++  CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex];
++  CLzmaProb posAlignEncoder[1 << kNumAlignBits];
++  
++  CLenPriceEnc lenEnc;
++  CLenPriceEnc repLenEnc;
++
++  UInt32 reps[LZMA_NUM_REPS];
++  UInt32 state;
++} CSaveState;
++
++typedef struct
++{
++  IMatchFinder matchFinder;
++  void *matchFinderObj;
++
++  #ifndef _7ZIP_ST
++  Bool mtMode;
++  CMatchFinderMt matchFinderMt;
++  #endif
++
++  CMatchFinder matchFinderBase;
++
++  #ifndef _7ZIP_ST
++  Byte pad[128];
++  #endif
++  
++  UInt32 optimumEndIndex;
++  UInt32 optimumCurrentIndex;
++
++  UInt32 longestMatchLength;
++  UInt32 numPairs;
++  UInt32 numAvail;
++  COptimal opt[kNumOpts];
++  
++  #ifndef LZMA_LOG_BSR
++  Byte g_FastPos[1 << kNumLogBits];
++  #endif
++
++  UInt32 ProbPrices[kBitModelTotal >> kNumMoveReducingBits];
++  UInt32 matches[LZMA_MATCH_LEN_MAX * 2 + 2 + 1];
++  UInt32 numFastBytes;
++  UInt32 additionalOffset;
++  UInt32 reps[LZMA_NUM_REPS];
++  UInt32 state;
++
++  UInt32 posSlotPrices[kNumLenToPosStates][kDistTableSizeMax];
++  UInt32 distancesPrices[kNumLenToPosStates][kNumFullDistances];
++  UInt32 alignPrices[kAlignTableSize];
++  UInt32 alignPriceCount;
++
++  UInt32 distTableSize;
++
++  unsigned lc, lp, pb;
++  unsigned lpMask, pbMask;
++
++  CLzmaProb *litProbs;
++
++  CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX];
++  CLzmaProb isRep[kNumStates];
++  CLzmaProb isRepG0[kNumStates];
++  CLzmaProb isRepG1[kNumStates];
++  CLzmaProb isRepG2[kNumStates];
++  CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX];
++
++  CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits];
++  CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex];
++  CLzmaProb posAlignEncoder[1 << kNumAlignBits];
++  
++  CLenPriceEnc lenEnc;
++  CLenPriceEnc repLenEnc;
++
++  unsigned lclp;
++
++  Bool fastMode;
++  
++  CRangeEnc rc;
++
++  Bool writeEndMark;
++  UInt64 nowPos64;
++  UInt32 matchPriceCount;
++  Bool finished;
++  Bool multiThread;
++
++  SRes result;
++  UInt32 dictSize;
++  UInt32 matchFinderCycles;
++
++  int needInit;
++
++  CSaveState saveState;
++} CLzmaEnc;
++
++void LzmaEnc_SaveState(CLzmaEncHandle pp)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  CSaveState *dest = &p->saveState;
++  int i;
++  dest->lenEnc = p->lenEnc;
++  dest->repLenEnc = p->repLenEnc;
++  dest->state = p->state;
++
++  for (i = 0; i < kNumStates; i++)
++  {
++    memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
++    memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
++  }
++  for (i = 0; i < kNumLenToPosStates; i++)
++    memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
++  memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
++  memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
++  memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
++  memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
++  memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
++  memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
++  memcpy(dest->reps, p->reps, sizeof(p->reps));
++  memcpy(dest->litProbs, p->litProbs, (0x300 << p->lclp) * sizeof(CLzmaProb));
++}
++
++void LzmaEnc_RestoreState(CLzmaEncHandle pp)
++{
++  CLzmaEnc *dest = (CLzmaEnc *)pp;
++  const CSaveState *p = &dest->saveState;
++  int i;
++  dest->lenEnc = p->lenEnc;
++  dest->repLenEnc = p->repLenEnc;
++  dest->state = p->state;
++
++  for (i = 0; i < kNumStates; i++)
++  {
++    memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
++    memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
++  }
++  for (i = 0; i < kNumLenToPosStates; i++)
++    memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
++  memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
++  memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
++  memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
++  memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
++  memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
++  memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
++  memcpy(dest->reps, p->reps, sizeof(p->reps));
++  memcpy(dest->litProbs, p->litProbs, (0x300 << dest->lclp) * sizeof(CLzmaProb));
++}
++
++SRes LzmaEnc_SetProps(CLzmaEncHandle pp, const CLzmaEncProps *props2)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  CLzmaEncProps props = *props2;
++  LzmaEncProps_Normalize(&props);
++
++  if (props.lc > LZMA_LC_MAX || props.lp > LZMA_LP_MAX || props.pb > LZMA_PB_MAX ||
++      props.dictSize > (1 << kDicLogSizeMaxCompress) || props.dictSize > (1 << 30))
++    return SZ_ERROR_PARAM;
++  p->dictSize = props.dictSize;
++  p->matchFinderCycles = props.mc;
++  {
++    unsigned fb = props.fb;
++    if (fb < 5)
++      fb = 5;
++    if (fb > LZMA_MATCH_LEN_MAX)
++      fb = LZMA_MATCH_LEN_MAX;
++    p->numFastBytes = fb;
++  }
++  p->lc = props.lc;
++  p->lp = props.lp;
++  p->pb = props.pb;
++  p->fastMode = (props.algo == 0);
++  p->matchFinderBase.btMode = props.btMode;
++  {
++    UInt32 numHashBytes = 4;
++    if (props.btMode)
++    {
++      if (props.numHashBytes < 2)
++        numHashBytes = 2;
++      else if (props.numHashBytes < 4)
++        numHashBytes = props.numHashBytes;
++    }
++    p->matchFinderBase.numHashBytes = numHashBytes;
++  }
++
++  p->matchFinderBase.cutValue = props.mc;
++
++  p->writeEndMark = props.writeEndMark;
++
++  #ifndef _7ZIP_ST
++  /*
++  if (newMultiThread != _multiThread)
++  {
++    ReleaseMatchFinder();
++    _multiThread = newMultiThread;
++  }
++  */
++  p->multiThread = (props.numThreads > 1);
++  #endif
++
++  return SZ_OK;
++}
++
++static const int kLiteralNextStates[kNumStates] = {0, 0, 0, 0, 1, 2, 3, 4,  5,  6,   4, 5};
++static const int kMatchNextStates[kNumStates]   = {7, 7, 7, 7, 7, 7, 7, 10, 10, 10, 10, 10};
++static const int kRepNextStates[kNumStates]     = {8, 8, 8, 8, 8, 8, 8, 11, 11, 11, 11, 11};
++static const int kShortRepNextStates[kNumStates]= {9, 9, 9, 9, 9, 9, 9, 11, 11, 11, 11, 11};
++
++#define IsCharState(s) ((s) < 7)
++
++#define GetLenToPosState(len) (((len) < kNumLenToPosStates + 1) ? (len) - 2 : kNumLenToPosStates - 1)
++
++#define kInfinityPrice (1 << 30)
++
++static void RangeEnc_Construct(CRangeEnc *p)
++{
++  p->outStream = 0;
++  p->bufBase = 0;
++}
++
++#define RangeEnc_GetProcessed(p) ((p)->processed + ((p)->buf - (p)->bufBase) + (p)->cacheSize)
++
++#define RC_BUF_SIZE (1 << 16)
++static int RangeEnc_Alloc(CRangeEnc *p, ISzAlloc *alloc)
++{
++  if (p->bufBase == 0)
++  {
++    p->bufBase = (Byte *)alloc->Alloc(alloc, RC_BUF_SIZE);
++    if (p->bufBase == 0)
++      return 0;
++    p->bufLim = p->bufBase + RC_BUF_SIZE;
++  }
++  return 1;
++}
++
++static void RangeEnc_Free(CRangeEnc *p, ISzAlloc *alloc)
++{
++  alloc->Free(alloc, p->bufBase);
++  p->bufBase = 0;
++}
++
++static void RangeEnc_Init(CRangeEnc *p)
++{
++  /* Stream.Init(); */
++  p->low = 0;
++  p->range = 0xFFFFFFFF;
++  p->cacheSize = 1;
++  p->cache = 0;
++
++  p->buf = p->bufBase;
++
++  p->processed = 0;
++  p->res = SZ_OK;
++}
++
++static void RangeEnc_FlushStream(CRangeEnc *p)
++{
++  size_t num;
++  if (p->res != SZ_OK)
++    return;
++  num = p->buf - p->bufBase;
++  if (num != p->outStream->Write(p->outStream, p->bufBase, num))
++    p->res = SZ_ERROR_WRITE;
++  p->processed += num;
++  p->buf = p->bufBase;
++}
++
++static void MY_FAST_CALL RangeEnc_ShiftLow(CRangeEnc *p)
++{
++  if ((UInt32)p->low < (UInt32)0xFF000000 || (int)(p->low >> 32) != 0)
++  {
++    Byte temp = p->cache;
++    do
++    {
++      Byte *buf = p->buf;
++      *buf++ = (Byte)(temp + (Byte)(p->low >> 32));
++      p->buf = buf;
++      if (buf == p->bufLim)
++        RangeEnc_FlushStream(p);
++      temp = 0xFF;
++    }
++    while (--p->cacheSize != 0);
++    p->cache = (Byte)((UInt32)p->low >> 24);
++  }
++  p->cacheSize++;
++  p->low = (UInt32)p->low << 8;
++}
++
++static void RangeEnc_FlushData(CRangeEnc *p)
++{
++  int i;
++  for (i = 0; i < 5; i++)
++    RangeEnc_ShiftLow(p);
++}
++
++static void RangeEnc_EncodeDirectBits(CRangeEnc *p, UInt32 value, int numBits)
++{
++  do
++  {
++    p->range >>= 1;
++    p->low += p->range & (0 - ((value >> --numBits) & 1));
++    if (p->range < kTopValue)
++    {
++      p->range <<= 8;
++      RangeEnc_ShiftLow(p);
++    }
++  }
++  while (numBits != 0);
++}
++
++static void RangeEnc_EncodeBit(CRangeEnc *p, CLzmaProb *prob, UInt32 symbol)
++{
++  UInt32 ttt = *prob;
++  UInt32 newBound = (p->range >> kNumBitModelTotalBits) * ttt;
++  if (symbol == 0)
++  {
++    p->range = newBound;
++    ttt += (kBitModelTotal - ttt) >> kNumMoveBits;
++  }
++  else
++  {
++    p->low += newBound;
++    p->range -= newBound;
++    ttt -= ttt >> kNumMoveBits;
++  }
++  *prob = (CLzmaProb)ttt;
++  if (p->range < kTopValue)
++  {
++    p->range <<= 8;
++    RangeEnc_ShiftLow(p);
++  }
++}
++
++static void LitEnc_Encode(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol)
++{
++  symbol |= 0x100;
++  do
++  {
++    RangeEnc_EncodeBit(p, probs + (symbol >> 8), (symbol >> 7) & 1);
++    symbol <<= 1;
++  }
++  while (symbol < 0x10000);
++}
++
++static void LitEnc_EncodeMatched(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol, UInt32 matchByte)
++{
++  UInt32 offs = 0x100;
++  symbol |= 0x100;
++  do
++  {
++    matchByte <<= 1;
++    RangeEnc_EncodeBit(p, probs + (offs + (matchByte & offs) + (symbol >> 8)), (symbol >> 7) & 1);
++    symbol <<= 1;
++    offs &= ~(matchByte ^ symbol);
++  }
++  while (symbol < 0x10000);
++}
++
++void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
++{
++  UInt32 i;
++  for (i = (1 << kNumMoveReducingBits) / 2; i < kBitModelTotal; i += (1 << kNumMoveReducingBits))
++  {
++    const int kCyclesBits = kNumBitPriceShiftBits;
++    UInt32 w = i;
++    UInt32 bitCount = 0;
++    int j;
++    for (j = 0; j < kCyclesBits; j++)
++    {
++      w = w * w;
++      bitCount <<= 1;
++      while (w >= ((UInt32)1 << 16))
++      {
++        w >>= 1;
++        bitCount++;
++      }
++    }
++    ProbPrices[i >> kNumMoveReducingBits] = ((kNumBitModelTotalBits << kCyclesBits) - 15 - bitCount);
++  }
++}
++
++
++#define GET_PRICE(prob, symbol) \
++  p->ProbPrices[((prob) ^ (((-(int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits];
++
++#define GET_PRICEa(prob, symbol) \
++  ProbPrices[((prob) ^ ((-((int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits];
++
++#define GET_PRICE_0(prob) p->ProbPrices[(prob) >> kNumMoveReducingBits]
++#define GET_PRICE_1(prob) p->ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits]
++
++#define GET_PRICE_0a(prob) ProbPrices[(prob) >> kNumMoveReducingBits]
++#define GET_PRICE_1a(prob) ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits]
++
++static UInt32 LitEnc_GetPrice(const CLzmaProb *probs, UInt32 symbol, UInt32 *ProbPrices)
++{
++  UInt32 price = 0;
++  symbol |= 0x100;
++  do
++  {
++    price += GET_PRICEa(probs[symbol >> 8], (symbol >> 7) & 1);
++    symbol <<= 1;
++  }
++  while (symbol < 0x10000);
++  return price;
++}
++
++static UInt32 LitEnc_GetPriceMatched(const CLzmaProb *probs, UInt32 symbol, UInt32 matchByte, UInt32 *ProbPrices)
++{
++  UInt32 price = 0;
++  UInt32 offs = 0x100;
++  symbol |= 0x100;
++  do
++  {
++    matchByte <<= 1;
++    price += GET_PRICEa(probs[offs + (matchByte & offs) + (symbol >> 8)], (symbol >> 7) & 1);
++    symbol <<= 1;
++    offs &= ~(matchByte ^ symbol);
++  }
++  while (symbol < 0x10000);
++  return price;
++}
++
++
++static void RcTree_Encode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol)
++{
++  UInt32 m = 1;
++  int i;
++  for (i = numBitLevels; i != 0;)
++  {
++    UInt32 bit;
++    i--;
++    bit = (symbol >> i) & 1;
++    RangeEnc_EncodeBit(rc, probs + m, bit);
++    m = (m << 1) | bit;
++  }
++}
++
++static void RcTree_ReverseEncode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol)
++{
++  UInt32 m = 1;
++  int i;
++  for (i = 0; i < numBitLevels; i++)
++  {
++    UInt32 bit = symbol & 1;
++    RangeEnc_EncodeBit(rc, probs + m, bit);
++    m = (m << 1) | bit;
++    symbol >>= 1;
++  }
++}
++
++static UInt32 RcTree_GetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices)
++{
++  UInt32 price = 0;
++  symbol |= (1 << numBitLevels);
++  while (symbol != 1)
++  {
++    price += GET_PRICEa(probs[symbol >> 1], symbol & 1);
++    symbol >>= 1;
++  }
++  return price;
++}
++
++static UInt32 RcTree_ReverseGetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices)
++{
++  UInt32 price = 0;
++  UInt32 m = 1;
++  int i;
++  for (i = numBitLevels; i != 0; i--)
++  {
++    UInt32 bit = symbol & 1;
++    symbol >>= 1;
++    price += GET_PRICEa(probs[m], bit);
++    m = (m << 1) | bit;
++  }
++  return price;
++}
++
++
++static void LenEnc_Init(CLenEnc *p)
++{
++  unsigned i;
++  p->choice = p->choice2 = kProbInitValue;
++  for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumLowBits); i++)
++    p->low[i] = kProbInitValue;
++  for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumMidBits); i++)
++    p->mid[i] = kProbInitValue;
++  for (i = 0; i < kLenNumHighSymbols; i++)
++    p->high[i] = kProbInitValue;
++}
++
++static void LenEnc_Encode(CLenEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState)
++{
++  if (symbol < kLenNumLowSymbols)
++  {
++    RangeEnc_EncodeBit(rc, &p->choice, 0);
++    RcTree_Encode(rc, p->low + (posState << kLenNumLowBits), kLenNumLowBits, symbol);
++  }
++  else
++  {
++    RangeEnc_EncodeBit(rc, &p->choice, 1);
++    if (symbol < kLenNumLowSymbols + kLenNumMidSymbols)
++    {
++      RangeEnc_EncodeBit(rc, &p->choice2, 0);
++      RcTree_Encode(rc, p->mid + (posState << kLenNumMidBits), kLenNumMidBits, symbol - kLenNumLowSymbols);
++    }
++    else
++    {
++      RangeEnc_EncodeBit(rc, &p->choice2, 1);
++      RcTree_Encode(rc, p->high, kLenNumHighBits, symbol - kLenNumLowSymbols - kLenNumMidSymbols);
++    }
++  }
++}
++
++static void LenEnc_SetPrices(CLenEnc *p, UInt32 posState, UInt32 numSymbols, UInt32 *prices, UInt32 *ProbPrices)
++{
++  UInt32 a0 = GET_PRICE_0a(p->choice);
++  UInt32 a1 = GET_PRICE_1a(p->choice);
++  UInt32 b0 = a1 + GET_PRICE_0a(p->choice2);
++  UInt32 b1 = a1 + GET_PRICE_1a(p->choice2);
++  UInt32 i = 0;
++  for (i = 0; i < kLenNumLowSymbols; i++)
++  {
++    if (i >= numSymbols)
++      return;
++    prices[i] = a0 + RcTree_GetPrice(p->low + (posState << kLenNumLowBits), kLenNumLowBits, i, ProbPrices);
++  }
++  for (; i < kLenNumLowSymbols + kLenNumMidSymbols; i++)
++  {
++    if (i >= numSymbols)
++      return;
++    prices[i] = b0 + RcTree_GetPrice(p->mid + (posState << kLenNumMidBits), kLenNumMidBits, i - kLenNumLowSymbols, ProbPrices);
++  }
++  for (; i < numSymbols; i++)
++    prices[i] = b1 + RcTree_GetPrice(p->high, kLenNumHighBits, i - kLenNumLowSymbols - kLenNumMidSymbols, ProbPrices);
++}
++
++static void MY_FAST_CALL LenPriceEnc_UpdateTable(CLenPriceEnc *p, UInt32 posState, UInt32 *ProbPrices)
++{
++  LenEnc_SetPrices(&p->p, posState, p->tableSize, p->prices[posState], ProbPrices);
++  p->counters[posState] = p->tableSize;
++}
++
++static void LenPriceEnc_UpdateTables(CLenPriceEnc *p, UInt32 numPosStates, UInt32 *ProbPrices)
++{
++  UInt32 posState;
++  for (posState = 0; posState < numPosStates; posState++)
++    LenPriceEnc_UpdateTable(p, posState, ProbPrices);
++}
++
++static void LenEnc_Encode2(CLenPriceEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState, Bool updatePrice, UInt32 *ProbPrices)
++{
++  LenEnc_Encode(&p->p, rc, symbol, posState);
++  if (updatePrice)
++    if (--p->counters[posState] == 0)
++      LenPriceEnc_UpdateTable(p, posState, ProbPrices);
++}
++
++
++
++
++static void MovePos(CLzmaEnc *p, UInt32 num)
++{
++  #ifdef SHOW_STAT
++  ttt += num;
++  printf("\n MovePos %d", num);
++  #endif
++  if (num != 0)
++  {
++    p->additionalOffset += num;
++    p->matchFinder.Skip(p->matchFinderObj, num);
++  }
++}
++
++static UInt32 ReadMatchDistances(CLzmaEnc *p, UInt32 *numDistancePairsRes)
++{
++  UInt32 lenRes = 0, numPairs;
++  p->numAvail = p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
++  numPairs = p->matchFinder.GetMatches(p->matchFinderObj, p->matches);
++  #ifdef SHOW_STAT
++  printf("\n i = %d numPairs = %d    ", ttt, numPairs / 2);
++  ttt++;
++  {
++    UInt32 i;
++    for (i = 0; i < numPairs; i += 2)
++      printf("%2d %6d   | ", p->matches[i], p->matches[i + 1]);
++  }
++  #endif
++  if (numPairs > 0)
++  {
++    lenRes = p->matches[numPairs - 2];
++    if (lenRes == p->numFastBytes)
++    {
++      const Byte *pby = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
++      UInt32 distance = p->matches[numPairs - 1] + 1;
++      UInt32 numAvail = p->numAvail;
++      if (numAvail > LZMA_MATCH_LEN_MAX)
++        numAvail = LZMA_MATCH_LEN_MAX;
++      {
++        const Byte *pby2 = pby - distance;
++        for (; lenRes < numAvail && pby[lenRes] == pby2[lenRes]; lenRes++);
++      }
++    }
++  }
++  p->additionalOffset++;
++  *numDistancePairsRes = numPairs;
++  return lenRes;
++}
++
++
++#define MakeAsChar(p) (p)->backPrev = (UInt32)(-1); (p)->prev1IsChar = False;
++#define MakeAsShortRep(p) (p)->backPrev = 0; (p)->prev1IsChar = False;
++#define IsShortRep(p) ((p)->backPrev == 0)
++
++static UInt32 GetRepLen1Price(CLzmaEnc *p, UInt32 state, UInt32 posState)
++{
++  return
++    GET_PRICE_0(p->isRepG0[state]) +
++    GET_PRICE_0(p->isRep0Long[state][posState]);
++}
++
++static UInt32 GetPureRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 state, UInt32 posState)
++{
++  UInt32 price;
++  if (repIndex == 0)
++  {
++    price = GET_PRICE_0(p->isRepG0[state]);
++    price += GET_PRICE_1(p->isRep0Long[state][posState]);
++  }
++  else
++  {
++    price = GET_PRICE_1(p->isRepG0[state]);
++    if (repIndex == 1)
++      price += GET_PRICE_0(p->isRepG1[state]);
++    else
++    {
++      price += GET_PRICE_1(p->isRepG1[state]);
++      price += GET_PRICE(p->isRepG2[state], repIndex - 2);
++    }
++  }
++  return price;
++}
++
++static UInt32 GetRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 len, UInt32 state, UInt32 posState)
++{
++  return p->repLenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN] +
++    GetPureRepPrice(p, repIndex, state, posState);
++}
++
++static UInt32 Backward(CLzmaEnc *p, UInt32 *backRes, UInt32 cur)
++{
++  UInt32 posMem = p->opt[cur].posPrev;
++  UInt32 backMem = p->opt[cur].backPrev;
++  p->optimumEndIndex = cur;
++  do
++  {
++    if (p->opt[cur].prev1IsChar)
++    {
++      MakeAsChar(&p->opt[posMem])
++      p->opt[posMem].posPrev = posMem - 1;
++      if (p->opt[cur].prev2)
++      {
++        p->opt[posMem - 1].prev1IsChar = False;
++        p->opt[posMem - 1].posPrev = p->opt[cur].posPrev2;
++        p->opt[posMem - 1].backPrev = p->opt[cur].backPrev2;
++      }
++    }
++    {
++      UInt32 posPrev = posMem;
++      UInt32 backCur = backMem;
++      
++      backMem = p->opt[posPrev].backPrev;
++      posMem = p->opt[posPrev].posPrev;
++      
++      p->opt[posPrev].backPrev = backCur;
++      p->opt[posPrev].posPrev = cur;
++      cur = posPrev;
++    }
++  }
++  while (cur != 0);
++  *backRes = p->opt[0].backPrev;
++  p->optimumCurrentIndex  = p->opt[0].posPrev;
++  return p->optimumCurrentIndex;
++}
++
++#define LIT_PROBS(pos, prevByte) (p->litProbs + ((((pos) & p->lpMask) << p->lc) + ((prevByte) >> (8 - p->lc))) * 0x300)
++
++static UInt32 GetOptimum(CLzmaEnc *p, UInt32 position, UInt32 *backRes)
++{
++  UInt32 numAvail, mainLen, numPairs, repMaxIndex, i, posState, lenEnd, len, cur;
++  UInt32 matchPrice, repMatchPrice, normalMatchPrice;
++  UInt32 reps[LZMA_NUM_REPS], repLens[LZMA_NUM_REPS];
++  UInt32 *matches;
++  const Byte *data;
++  Byte curByte, matchByte;
++  if (p->optimumEndIndex != p->optimumCurrentIndex)
++  {
++    const COptimal *opt = &p->opt[p->optimumCurrentIndex];
++    UInt32 lenRes = opt->posPrev - p->optimumCurrentIndex;
++    *backRes = opt->backPrev;
++    p->optimumCurrentIndex = opt->posPrev;
++    return lenRes;
++  }
++  p->optimumCurrentIndex = p->optimumEndIndex = 0;
++  
++  if (p->additionalOffset == 0)
++    mainLen = ReadMatchDistances(p, &numPairs);
++  else
++  {
++    mainLen = p->longestMatchLength;
++    numPairs = p->numPairs;
++  }
++
++  numAvail = p->numAvail;
++  if (numAvail < 2)
++  {
++    *backRes = (UInt32)(-1);
++    return 1;
++  }
++  if (numAvail > LZMA_MATCH_LEN_MAX)
++    numAvail = LZMA_MATCH_LEN_MAX;
++
++  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
++  repMaxIndex = 0;
++  for (i = 0; i < LZMA_NUM_REPS; i++)
++  {
++    UInt32 lenTest;
++    const Byte *data2;
++    reps[i] = p->reps[i];
++    data2 = data - (reps[i] + 1);
++    if (data[0] != data2[0] || data[1] != data2[1])
++    {
++      repLens[i] = 0;
++      continue;
++    }
++    for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++);
++    repLens[i] = lenTest;
++    if (lenTest > repLens[repMaxIndex])
++      repMaxIndex = i;
++  }
++  if (repLens[repMaxIndex] >= p->numFastBytes)
++  {
++    UInt32 lenRes;
++    *backRes = repMaxIndex;
++    lenRes = repLens[repMaxIndex];
++    MovePos(p, lenRes - 1);
++    return lenRes;
++  }
++
++  matches = p->matches;
++  if (mainLen >= p->numFastBytes)
++  {
++    *backRes = matches[numPairs - 1] + LZMA_NUM_REPS;
++    MovePos(p, mainLen - 1);
++    return mainLen;
++  }
++  curByte = *data;
++  matchByte = *(data - (reps[0] + 1));
++
++  if (mainLen < 2 && curByte != matchByte && repLens[repMaxIndex] < 2)
++  {
++    *backRes = (UInt32)-1;
++    return 1;
++  }
++
++  p->opt[0].state = (CState)p->state;
++
++  posState = (position & p->pbMask);
++
++  {
++    const CLzmaProb *probs = LIT_PROBS(position, *(data - 1));
++    p->opt[1].price = GET_PRICE_0(p->isMatch[p->state][posState]) +
++        (!IsCharState(p->state) ?
++          LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) :
++          LitEnc_GetPrice(probs, curByte, p->ProbPrices));
++  }
++
++  MakeAsChar(&p->opt[1]);
++
++  matchPrice = GET_PRICE_1(p->isMatch[p->state][posState]);
++  repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[p->state]);
++
++  if (matchByte == curByte)
++  {
++    UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, p->state, posState);
++    if (shortRepPrice < p->opt[1].price)
++    {
++      p->opt[1].price = shortRepPrice;
++      MakeAsShortRep(&p->opt[1]);
++    }
++  }
++  lenEnd = ((mainLen >= repLens[repMaxIndex]) ? mainLen : repLens[repMaxIndex]);
++
++  if (lenEnd < 2)
++  {
++    *backRes = p->opt[1].backPrev;
++    return 1;
++  }
++
++  p->opt[1].posPrev = 0;
++  for (i = 0; i < LZMA_NUM_REPS; i++)
++    p->opt[0].backs[i] = reps[i];
++
++  len = lenEnd;
++  do
++    p->opt[len--].price = kInfinityPrice;
++  while (len >= 2);
++
++  for (i = 0; i < LZMA_NUM_REPS; i++)
++  {
++    UInt32 repLen = repLens[i];
++    UInt32 price;
++    if (repLen < 2)
++      continue;
++    price = repMatchPrice + GetPureRepPrice(p, i, p->state, posState);
++    do
++    {
++      UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][repLen - 2];
++      COptimal *opt = &p->opt[repLen];
++      if (curAndLenPrice < opt->price)
++      {
++        opt->price = curAndLenPrice;
++        opt->posPrev = 0;
++        opt->backPrev = i;
++        opt->prev1IsChar = False;
++      }
++    }
++    while (--repLen >= 2);
++  }
++
++  normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[p->state]);
++
++  len = ((repLens[0] >= 2) ? repLens[0] + 1 : 2);
++  if (len <= mainLen)
++  {
++    UInt32 offs = 0;
++    while (len > matches[offs])
++      offs += 2;
++    for (; ; len++)
++    {
++      COptimal *opt;
++      UInt32 distance = matches[offs + 1];
++
++      UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN];
++      UInt32 lenToPosState = GetLenToPosState(len);
++      if (distance < kNumFullDistances)
++        curAndLenPrice += p->distancesPrices[lenToPosState][distance];
++      else
++      {
++        UInt32 slot;
++        GetPosSlot2(distance, slot);
++        curAndLenPrice += p->alignPrices[distance & kAlignMask] + p->posSlotPrices[lenToPosState][slot];
++      }
++      opt = &p->opt[len];
++      if (curAndLenPrice < opt->price)
++      {
++        opt->price = curAndLenPrice;
++        opt->posPrev = 0;
++        opt->backPrev = distance + LZMA_NUM_REPS;
++        opt->prev1IsChar = False;
++      }
++      if (len == matches[offs])
++      {
++        offs += 2;
++        if (offs == numPairs)
++          break;
++      }
++    }
++  }
++
++  cur = 0;
++
++    #ifdef SHOW_STAT2
++    if (position >= 0)
++    {
++      unsigned i;
++      printf("\n pos = %4X", position);
++      for (i = cur; i <= lenEnd; i++)
++      printf("\nprice[%4X] = %d", position - cur + i, p->opt[i].price);
++    }
++    #endif
++
++  for (;;)
++  {
++    UInt32 numAvailFull, newLen, numPairs, posPrev, state, posState, startLen;
++    UInt32 curPrice, curAnd1Price, matchPrice, repMatchPrice;
++    Bool nextIsChar;
++    Byte curByte, matchByte;
++    const Byte *data;
++    COptimal *curOpt;
++    COptimal *nextOpt;
++
++    cur++;
++    if (cur == lenEnd)
++      return Backward(p, backRes, cur);
++
++    newLen = ReadMatchDistances(p, &numPairs);
++    if (newLen >= p->numFastBytes)
++    {
++      p->numPairs = numPairs;
++      p->longestMatchLength = newLen;
++      return Backward(p, backRes, cur);
++    }
++    position++;
++    curOpt = &p->opt[cur];
++    posPrev = curOpt->posPrev;
++    if (curOpt->prev1IsChar)
++    {
++      posPrev--;
++      if (curOpt->prev2)
++      {
++        state = p->opt[curOpt->posPrev2].state;
++        if (curOpt->backPrev2 < LZMA_NUM_REPS)
++          state = kRepNextStates[state];
++        else
++          state = kMatchNextStates[state];
++      }
++      else
++        state = p->opt[posPrev].state;
++      state = kLiteralNextStates[state];
++    }
++    else
++      state = p->opt[posPrev].state;
++    if (posPrev == cur - 1)
++    {
++      if (IsShortRep(curOpt))
++        state = kShortRepNextStates[state];
++      else
++        state = kLiteralNextStates[state];
++    }
++    else
++    {
++      UInt32 pos;
++      const COptimal *prevOpt;
++      if (curOpt->prev1IsChar && curOpt->prev2)
++      {
++        posPrev = curOpt->posPrev2;
++        pos = curOpt->backPrev2;
++        state = kRepNextStates[state];
++      }
++      else
++      {
++        pos = curOpt->backPrev;
++        if (pos < LZMA_NUM_REPS)
++          state = kRepNextStates[state];
++        else
++          state = kMatchNextStates[state];
++      }
++      prevOpt = &p->opt[posPrev];
++      if (pos < LZMA_NUM_REPS)
++      {
++        UInt32 i;
++        reps[0] = prevOpt->backs[pos];
++        for (i = 1; i <= pos; i++)
++          reps[i] = prevOpt->backs[i - 1];
++        for (; i < LZMA_NUM_REPS; i++)
++          reps[i] = prevOpt->backs[i];
++      }
++      else
++      {
++        UInt32 i;
++        reps[0] = (pos - LZMA_NUM_REPS);
++        for (i = 1; i < LZMA_NUM_REPS; i++)
++          reps[i] = prevOpt->backs[i - 1];
++      }
++    }
++    curOpt->state = (CState)state;
++
++    curOpt->backs[0] = reps[0];
++    curOpt->backs[1] = reps[1];
++    curOpt->backs[2] = reps[2];
++    curOpt->backs[3] = reps[3];
++
++    curPrice = curOpt->price;
++    nextIsChar = False;
++    data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
++    curByte = *data;
++    matchByte = *(data - (reps[0] + 1));
++
++    posState = (position & p->pbMask);
++
++    curAnd1Price = curPrice + GET_PRICE_0(p->isMatch[state][posState]);
++    {
++      const CLzmaProb *probs = LIT_PROBS(position, *(data - 1));
++      curAnd1Price +=
++        (!IsCharState(state) ?
++          LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) :
++          LitEnc_GetPrice(probs, curByte, p->ProbPrices));
++    }
++
++    nextOpt = &p->opt[cur + 1];
++
++    if (curAnd1Price < nextOpt->price)
++    {
++      nextOpt->price = curAnd1Price;
++      nextOpt->posPrev = cur;
++      MakeAsChar(nextOpt);
++      nextIsChar = True;
++    }
++
++    matchPrice = curPrice + GET_PRICE_1(p->isMatch[state][posState]);
++    repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[state]);
++    
++    if (matchByte == curByte && !(nextOpt->posPrev < cur && nextOpt->backPrev == 0))
++    {
++      UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, state, posState);
++      if (shortRepPrice <= nextOpt->price)
++      {
++        nextOpt->price = shortRepPrice;
++        nextOpt->posPrev = cur;
++        MakeAsShortRep(nextOpt);
++        nextIsChar = True;
++      }
++    }
++    numAvailFull = p->numAvail;
++    {
++      UInt32 temp = kNumOpts - 1 - cur;
++      if (temp < numAvailFull)
++        numAvailFull = temp;
++    }
++
++    if (numAvailFull < 2)
++      continue;
++    numAvail = (numAvailFull <= p->numFastBytes ? numAvailFull : p->numFastBytes);
++
++    if (!nextIsChar && matchByte != curByte) /* speed optimization */
++    {
++      /* try Literal + rep0 */
++      UInt32 temp;
++      UInt32 lenTest2;
++      const Byte *data2 = data - (reps[0] + 1);
++      UInt32 limit = p->numFastBytes + 1;
++      if (limit > numAvailFull)
++        limit = numAvailFull;
++
++      for (temp = 1; temp < limit && data[temp] == data2[temp]; temp++);
++      lenTest2 = temp - 1;
++      if (lenTest2 >= 2)
++      {
++        UInt32 state2 = kLiteralNextStates[state];
++        UInt32 posStateNext = (position + 1) & p->pbMask;
++        UInt32 nextRepMatchPrice = curAnd1Price +
++            GET_PRICE_1(p->isMatch[state2][posStateNext]) +
++            GET_PRICE_1(p->isRep[state2]);
++        /* for (; lenTest2 >= 2; lenTest2--) */
++        {
++          UInt32 curAndLenPrice;
++          COptimal *opt;
++          UInt32 offset = cur + 1 + lenTest2;
++          while (lenEnd < offset)
++            p->opt[++lenEnd].price = kInfinityPrice;
++          curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
++          opt = &p->opt[offset];
++          if (curAndLenPrice < opt->price)
++          {
++            opt->price = curAndLenPrice;
++            opt->posPrev = cur + 1;
++            opt->backPrev = 0;
++            opt->prev1IsChar = True;
++            opt->prev2 = False;
++          }
++        }
++      }
++    }
++    
++    startLen = 2; /* speed optimization */
++    {
++    UInt32 repIndex;
++    for (repIndex = 0; repIndex < LZMA_NUM_REPS; repIndex++)
++    {
++      UInt32 lenTest;
++      UInt32 lenTestTemp;
++      UInt32 price;
++      const Byte *data2 = data - (reps[repIndex] + 1);
++      if (data[0] != data2[0] || data[1] != data2[1])
++        continue;
++      for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++);
++      while (lenEnd < cur + lenTest)
++        p->opt[++lenEnd].price = kInfinityPrice;
++      lenTestTemp = lenTest;
++      price = repMatchPrice + GetPureRepPrice(p, repIndex, state, posState);
++      do
++      {
++        UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][lenTest - 2];
++        COptimal *opt = &p->opt[cur + lenTest];
++        if (curAndLenPrice < opt->price)
++        {
++          opt->price = curAndLenPrice;
++          opt->posPrev = cur;
++          opt->backPrev = repIndex;
++          opt->prev1IsChar = False;
++        }
++      }
++      while (--lenTest >= 2);
++      lenTest = lenTestTemp;
++      
++      if (repIndex == 0)
++        startLen = lenTest + 1;
++        
++      /* if (_maxMode) */
++        {
++          UInt32 lenTest2 = lenTest + 1;
++          UInt32 limit = lenTest2 + p->numFastBytes;
++          UInt32 nextRepMatchPrice;
++          if (limit > numAvailFull)
++            limit = numAvailFull;
++          for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++);
++          lenTest2 -= lenTest + 1;
++          if (lenTest2 >= 2)
++          {
++            UInt32 state2 = kRepNextStates[state];
++            UInt32 posStateNext = (position + lenTest) & p->pbMask;
++            UInt32 curAndLenCharPrice =
++                price + p->repLenEnc.prices[posState][lenTest - 2] +
++                GET_PRICE_0(p->isMatch[state2][posStateNext]) +
++                LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]),
++                    data[lenTest], data2[lenTest], p->ProbPrices);
++            state2 = kLiteralNextStates[state2];
++            posStateNext = (position + lenTest + 1) & p->pbMask;
++            nextRepMatchPrice = curAndLenCharPrice +
++                GET_PRICE_1(p->isMatch[state2][posStateNext]) +
++                GET_PRICE_1(p->isRep[state2]);
++            
++            /* for (; lenTest2 >= 2; lenTest2--) */
++            {
++              UInt32 curAndLenPrice;
++              COptimal *opt;
++              UInt32 offset = cur + lenTest + 1 + lenTest2;
++              while (lenEnd < offset)
++                p->opt[++lenEnd].price = kInfinityPrice;
++              curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
++              opt = &p->opt[offset];
++              if (curAndLenPrice < opt->price)
++              {
++                opt->price = curAndLenPrice;
++                opt->posPrev = cur + lenTest + 1;
++                opt->backPrev = 0;
++                opt->prev1IsChar = True;
++                opt->prev2 = True;
++                opt->posPrev2 = cur;
++                opt->backPrev2 = repIndex;
++              }
++            }
++          }
++        }
++    }
++    }
++    /* for (UInt32 lenTest = 2; lenTest <= newLen; lenTest++) */
++    if (newLen > numAvail)
++    {
++      newLen = numAvail;
++      for (numPairs = 0; newLen > matches[numPairs]; numPairs += 2);
++      matches[numPairs] = newLen;
++      numPairs += 2;
++    }
++    if (newLen >= startLen)
++    {
++      UInt32 normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[state]);
++      UInt32 offs, curBack, posSlot;
++      UInt32 lenTest;
++      while (lenEnd < cur + newLen)
++        p->opt[++lenEnd].price = kInfinityPrice;
++
++      offs = 0;
++      while (startLen > matches[offs])
++        offs += 2;
++      curBack = matches[offs + 1];
++      GetPosSlot2(curBack, posSlot);
++      for (lenTest = /*2*/ startLen; ; lenTest++)
++      {
++        UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][lenTest - LZMA_MATCH_LEN_MIN];
++        UInt32 lenToPosState = GetLenToPosState(lenTest);
++        COptimal *opt;
++        if (curBack < kNumFullDistances)
++          curAndLenPrice += p->distancesPrices[lenToPosState][curBack];
++        else
++          curAndLenPrice += p->posSlotPrices[lenToPosState][posSlot] + p->alignPrices[curBack & kAlignMask];
++        
++        opt = &p->opt[cur + lenTest];
++        if (curAndLenPrice < opt->price)
++        {
++          opt->price = curAndLenPrice;
++          opt->posPrev = cur;
++          opt->backPrev = curBack + LZMA_NUM_REPS;
++          opt->prev1IsChar = False;
++        }
++
++        if (/*_maxMode && */lenTest == matches[offs])
++        {
++          /* Try Match + Literal + Rep0 */
++          const Byte *data2 = data - (curBack + 1);
++          UInt32 lenTest2 = lenTest + 1;
++          UInt32 limit = lenTest2 + p->numFastBytes;
++          UInt32 nextRepMatchPrice;
++          if (limit > numAvailFull)
++            limit = numAvailFull;
++          for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++);
++          lenTest2 -= lenTest + 1;
++          if (lenTest2 >= 2)
++          {
++            UInt32 state2 = kMatchNextStates[state];
++            UInt32 posStateNext = (position + lenTest) & p->pbMask;
++            UInt32 curAndLenCharPrice = curAndLenPrice +
++                GET_PRICE_0(p->isMatch[state2][posStateNext]) +
++                LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]),
++                    data[lenTest], data2[lenTest], p->ProbPrices);
++            state2 = kLiteralNextStates[state2];
++            posStateNext = (posStateNext + 1) & p->pbMask;
++            nextRepMatchPrice = curAndLenCharPrice +
++                GET_PRICE_1(p->isMatch[state2][posStateNext]) +
++                GET_PRICE_1(p->isRep[state2]);
++            
++            /* for (; lenTest2 >= 2; lenTest2--) */
++            {
++              UInt32 offset = cur + lenTest + 1 + lenTest2;
++              UInt32 curAndLenPrice;
++              COptimal *opt;
++              while (lenEnd < offset)
++                p->opt[++lenEnd].price = kInfinityPrice;
++              curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
++              opt = &p->opt[offset];
++              if (curAndLenPrice < opt->price)
++              {
++                opt->price = curAndLenPrice;
++                opt->posPrev = cur + lenTest + 1;
++                opt->backPrev = 0;
++                opt->prev1IsChar = True;
++                opt->prev2 = True;
++                opt->posPrev2 = cur;
++                opt->backPrev2 = curBack + LZMA_NUM_REPS;
++              }
++            }
++          }
++          offs += 2;
++          if (offs == numPairs)
++            break;
++          curBack = matches[offs + 1];
++          if (curBack >= kNumFullDistances)
++            GetPosSlot2(curBack, posSlot);
++        }
++      }
++    }
++  }
++}
++
++#define ChangePair(smallDist, bigDist) (((bigDist) >> 7) > (smallDist))
++
++static UInt32 GetOptimumFast(CLzmaEnc *p, UInt32 *backRes)
++{
++  UInt32 numAvail, mainLen, mainDist, numPairs, repIndex, repLen, i;
++  const Byte *data;
++  const UInt32 *matches;
++
++  if (p->additionalOffset == 0)
++    mainLen = ReadMatchDistances(p, &numPairs);
++  else
++  {
++    mainLen = p->longestMatchLength;
++    numPairs = p->numPairs;
++  }
++
++  numAvail = p->numAvail;
++  *backRes = (UInt32)-1;
++  if (numAvail < 2)
++    return 1;
++  if (numAvail > LZMA_MATCH_LEN_MAX)
++    numAvail = LZMA_MATCH_LEN_MAX;
++  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
++
++  repLen = repIndex = 0;
++  for (i = 0; i < LZMA_NUM_REPS; i++)
++  {
++    UInt32 len;
++    const Byte *data2 = data - (p->reps[i] + 1);
++    if (data[0] != data2[0] || data[1] != data2[1])
++      continue;
++    for (len = 2; len < numAvail && data[len] == data2[len]; len++);
++    if (len >= p->numFastBytes)
++    {
++      *backRes = i;
++      MovePos(p, len - 1);
++      return len;
++    }
++    if (len > repLen)
++    {
++      repIndex = i;
++      repLen = len;
++    }
++  }
++
++  matches = p->matches;
++  if (mainLen >= p->numFastBytes)
++  {
++    *backRes = matches[numPairs - 1] + LZMA_NUM_REPS;
++    MovePos(p, mainLen - 1);
++    return mainLen;
++  }
++
++  mainDist = 0; /* for GCC */
++  if (mainLen >= 2)
++  {
++    mainDist = matches[numPairs - 1];
++    while (numPairs > 2 && mainLen == matches[numPairs - 4] + 1)
++    {
++      if (!ChangePair(matches[numPairs - 3], mainDist))
++        break;
++      numPairs -= 2;
++      mainLen = matches[numPairs - 2];
++      mainDist = matches[numPairs - 1];
++    }
++    if (mainLen == 2 && mainDist >= 0x80)
++      mainLen = 1;
++  }
++
++  if (repLen >= 2 && (
++        (repLen + 1 >= mainLen) ||
++        (repLen + 2 >= mainLen && mainDist >= (1 << 9)) ||
++        (repLen + 3 >= mainLen && mainDist >= (1 << 15))))
++  {
++    *backRes = repIndex;
++    MovePos(p, repLen - 1);
++    return repLen;
++  }
++  
++  if (mainLen < 2 || numAvail <= 2)
++    return 1;
++
++  p->longestMatchLength = ReadMatchDistances(p, &p->numPairs);
++  if (p->longestMatchLength >= 2)
++  {
++    UInt32 newDistance = matches[p->numPairs - 1];
++    if ((p->longestMatchLength >= mainLen && newDistance < mainDist) ||
++        (p->longestMatchLength == mainLen + 1 && !ChangePair(mainDist, newDistance)) ||
++        (p->longestMatchLength > mainLen + 1) ||
++        (p->longestMatchLength + 1 >= mainLen && mainLen >= 3 && ChangePair(newDistance, mainDist)))
++      return 1;
++  }
++  
++  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
++  for (i = 0; i < LZMA_NUM_REPS; i++)
++  {
++    UInt32 len, limit;
++    const Byte *data2 = data - (p->reps[i] + 1);
++    if (data[0] != data2[0] || data[1] != data2[1])
++      continue;
++    limit = mainLen - 1;
++    for (len = 2; len < limit && data[len] == data2[len]; len++);
++    if (len >= limit)
++      return 1;
++  }
++  *backRes = mainDist + LZMA_NUM_REPS;
++  MovePos(p, mainLen - 2);
++  return mainLen;
++}
++
++static void WriteEndMarker(CLzmaEnc *p, UInt32 posState)
++{
++  UInt32 len;
++  RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1);
++  RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0);
++  p->state = kMatchNextStates[p->state];
++  len = LZMA_MATCH_LEN_MIN;
++  LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
++  RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, (1 << kNumPosSlotBits) - 1);
++  RangeEnc_EncodeDirectBits(&p->rc, (((UInt32)1 << 30) - 1) >> kNumAlignBits, 30 - kNumAlignBits);
++  RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, kAlignMask);
++}
++
++static SRes CheckErrors(CLzmaEnc *p)
++{
++  if (p->result != SZ_OK)
++    return p->result;
++  if (p->rc.res != SZ_OK)
++    p->result = SZ_ERROR_WRITE;
++  if (p->matchFinderBase.result != SZ_OK)
++    p->result = SZ_ERROR_READ;
++  if (p->result != SZ_OK)
++    p->finished = True;
++  return p->result;
++}
++
++static SRes Flush(CLzmaEnc *p, UInt32 nowPos)
++{
++  /* ReleaseMFStream(); */
++  p->finished = True;
++  if (p->writeEndMark)
++    WriteEndMarker(p, nowPos & p->pbMask);
++  RangeEnc_FlushData(&p->rc);
++  RangeEnc_FlushStream(&p->rc);
++  return CheckErrors(p);
++}
++
++static void FillAlignPrices(CLzmaEnc *p)
++{
++  UInt32 i;
++  for (i = 0; i < kAlignTableSize; i++)
++    p->alignPrices[i] = RcTree_ReverseGetPrice(p->posAlignEncoder, kNumAlignBits, i, p->ProbPrices);
++  p->alignPriceCount = 0;
++}
++
++static void FillDistancesPrices(CLzmaEnc *p)
++{
++  UInt32 tempPrices[kNumFullDistances];
++  UInt32 i, lenToPosState;
++  for (i = kStartPosModelIndex; i < kNumFullDistances; i++)
++  {
++    UInt32 posSlot = GetPosSlot1(i);
++    UInt32 footerBits = ((posSlot >> 1) - 1);
++    UInt32 base = ((2 | (posSlot & 1)) << footerBits);
++    tempPrices[i] = RcTree_ReverseGetPrice(p->posEncoders + base - posSlot - 1, footerBits, i - base, p->ProbPrices);
++  }
++
++  for (lenToPosState = 0; lenToPosState < kNumLenToPosStates; lenToPosState++)
++  {
++    UInt32 posSlot;
++    const CLzmaProb *encoder = p->posSlotEncoder[lenToPosState];
++    UInt32 *posSlotPrices = p->posSlotPrices[lenToPosState];
++    for (posSlot = 0; posSlot < p->distTableSize; posSlot++)
++      posSlotPrices[posSlot] = RcTree_GetPrice(encoder, kNumPosSlotBits, posSlot, p->ProbPrices);
++    for (posSlot = kEndPosModelIndex; posSlot < p->distTableSize; posSlot++)
++      posSlotPrices[posSlot] += ((((posSlot >> 1) - 1) - kNumAlignBits) << kNumBitPriceShiftBits);
++
++    {
++      UInt32 *distancesPrices = p->distancesPrices[lenToPosState];
++      UInt32 i;
++      for (i = 0; i < kStartPosModelIndex; i++)
++        distancesPrices[i] = posSlotPrices[i];
++      for (; i < kNumFullDistances; i++)
++        distancesPrices[i] = posSlotPrices[GetPosSlot1(i)] + tempPrices[i];
++    }
++  }
++  p->matchPriceCount = 0;
++}
++
++void LzmaEnc_Construct(CLzmaEnc *p)
++{
++  RangeEnc_Construct(&p->rc);
++  MatchFinder_Construct(&p->matchFinderBase);
++  #ifndef _7ZIP_ST
++  MatchFinderMt_Construct(&p->matchFinderMt);
++  p->matchFinderMt.MatchFinder = &p->matchFinderBase;
++  #endif
++
++  {
++    CLzmaEncProps props;
++    LzmaEncProps_Init(&props);
++    LzmaEnc_SetProps(p, &props);
++  }
++
++  #ifndef LZMA_LOG_BSR
++  LzmaEnc_FastPosInit(p->g_FastPos);
++  #endif
++
++  LzmaEnc_InitPriceTables(p->ProbPrices);
++  p->litProbs = 0;
++  p->saveState.litProbs = 0;
++}
++
++CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc)
++{
++  void *p;
++  p = alloc->Alloc(alloc, sizeof(CLzmaEnc));
++  if (p != 0)
++    LzmaEnc_Construct((CLzmaEnc *)p);
++  return p;
++}
++
++void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
++{
++  alloc->Free(alloc, p->litProbs);
++  alloc->Free(alloc, p->saveState.litProbs);
++  p->litProbs = 0;
++  p->saveState.litProbs = 0;
++}
++
++void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  #ifndef _7ZIP_ST
++  MatchFinderMt_Destruct(&p->matchFinderMt, allocBig);
++  #endif
++  MatchFinder_Free(&p->matchFinderBase, allocBig);
++  LzmaEnc_FreeLits(p, alloc);
++  RangeEnc_Free(&p->rc, alloc);
++}
++
++void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  LzmaEnc_Destruct((CLzmaEnc *)p, alloc, allocBig);
++  alloc->Free(alloc, p);
++}
++
++static SRes LzmaEnc_CodeOneBlock(CLzmaEnc *p, Bool useLimits, UInt32 maxPackSize, UInt32 maxUnpackSize)
++{
++  UInt32 nowPos32, startPos32;
++  if (p->needInit)
++  {
++    p->matchFinder.Init(p->matchFinderObj);
++    p->needInit = 0;
++  }
++
++  if (p->finished)
++    return p->result;
++  RINOK(CheckErrors(p));
++
++  nowPos32 = (UInt32)p->nowPos64;
++  startPos32 = nowPos32;
++
++  if (p->nowPos64 == 0)
++  {
++    UInt32 numPairs;
++    Byte curByte;
++    if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0)
++      return Flush(p, nowPos32);
++    ReadMatchDistances(p, &numPairs);
++    RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][0], 0);
++    p->state = kLiteralNextStates[p->state];
++    curByte = p->matchFinder.GetIndexByte(p->matchFinderObj, 0 - p->additionalOffset);
++    LitEnc_Encode(&p->rc, p->litProbs, curByte);
++    p->additionalOffset--;
++    nowPos32++;
++  }
++
++  if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) != 0)
++  for (;;)
++  {
++    UInt32 pos, len, posState;
++
++    if (p->fastMode)
++      len = GetOptimumFast(p, &pos);
++    else
++      len = GetOptimum(p, nowPos32, &pos);
++
++    #ifdef SHOW_STAT2
++    printf("\n pos = %4X,   len = %d   pos = %d", nowPos32, len, pos);
++    #endif
++
++    posState = nowPos32 & p->pbMask;
++    if (len == 1 && pos == (UInt32)-1)
++    {
++      Byte curByte;
++      CLzmaProb *probs;
++      const Byte *data;
++
++      RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 0);
++      data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
++      curByte = *data;
++      probs = LIT_PROBS(nowPos32, *(data - 1));
++      if (IsCharState(p->state))
++        LitEnc_Encode(&p->rc, probs, curByte);
++      else
++        LitEnc_EncodeMatched(&p->rc, probs, curByte, *(data - p->reps[0] - 1));
++      p->state = kLiteralNextStates[p->state];
++    }
++    else
++    {
++      RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1);
++      if (pos < LZMA_NUM_REPS)
++      {
++        RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 1);
++        if (pos == 0)
++        {
++          RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 0);
++          RangeEnc_EncodeBit(&p->rc, &p->isRep0Long[p->state][posState], ((len == 1) ? 0 : 1));
++        }
++        else
++        {
++          UInt32 distance = p->reps[pos];
++          RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 1);
++          if (pos == 1)
++            RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 0);
++          else
++          {
++            RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 1);
++            RangeEnc_EncodeBit(&p->rc, &p->isRepG2[p->state], pos - 2);
++            if (pos == 3)
++              p->reps[3] = p->reps[2];
++            p->reps[2] = p->reps[1];
++          }
++          p->reps[1] = p->reps[0];
++          p->reps[0] = distance;
++        }
++        if (len == 1)
++          p->state = kShortRepNextStates[p->state];
++        else
++        {
++          LenEnc_Encode2(&p->repLenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
++          p->state = kRepNextStates[p->state];
++        }
++      }
++      else
++      {
++        UInt32 posSlot;
++        RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0);
++        p->state = kMatchNextStates[p->state];
++        LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
++        pos -= LZMA_NUM_REPS;
++        GetPosSlot(pos, posSlot);
++        RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, posSlot);
++        
++        if (posSlot >= kStartPosModelIndex)
++        {
++          UInt32 footerBits = ((posSlot >> 1) - 1);
++          UInt32 base = ((2 | (posSlot & 1)) << footerBits);
++          UInt32 posReduced = pos - base;
++
++          if (posSlot < kEndPosModelIndex)
++            RcTree_ReverseEncode(&p->rc, p->posEncoders + base - posSlot - 1, footerBits, posReduced);
++          else
++          {
++            RangeEnc_EncodeDirectBits(&p->rc, posReduced >> kNumAlignBits, footerBits - kNumAlignBits);
++            RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, posReduced & kAlignMask);
++            p->alignPriceCount++;
++          }
++        }
++        p->reps[3] = p->reps[2];
++        p->reps[2] = p->reps[1];
++        p->reps[1] = p->reps[0];
++        p->reps[0] = pos;
++        p->matchPriceCount++;
++      }
++    }
++    p->additionalOffset -= len;
++    nowPos32 += len;
++    if (p->additionalOffset == 0)
++    {
++      UInt32 processed;
++      if (!p->fastMode)
++      {
++        if (p->matchPriceCount >= (1 << 7))
++          FillDistancesPrices(p);
++        if (p->alignPriceCount >= kAlignTableSize)
++          FillAlignPrices(p);
++      }
++      if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0)
++        break;
++      processed = nowPos32 - startPos32;
++      if (useLimits)
++      {
++        if (processed + kNumOpts + 300 >= maxUnpackSize ||
++            RangeEnc_GetProcessed(&p->rc) + kNumOpts * 2 >= maxPackSize)
++          break;
++      }
++      else if (processed >= (1 << 15))
++      {
++        p->nowPos64 += nowPos32 - startPos32;
++        return CheckErrors(p);
++      }
++    }
++  }
++  p->nowPos64 += nowPos32 - startPos32;
++  return Flush(p, nowPos32);
++}
++
++#define kBigHashDicLimit ((UInt32)1 << 24)
++
++static SRes LzmaEnc_Alloc(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  UInt32 beforeSize = kNumOpts;
++  Bool btMode;
++  if (!RangeEnc_Alloc(&p->rc, alloc))
++    return SZ_ERROR_MEM;
++  btMode = (p->matchFinderBase.btMode != 0);
++  #ifndef _7ZIP_ST
++  p->mtMode = (p->multiThread && !p->fastMode && btMode);
++  #endif
++
++  {
++    unsigned lclp = p->lc + p->lp;
++    if (p->litProbs == 0 || p->saveState.litProbs == 0 || p->lclp != lclp)
++    {
++      LzmaEnc_FreeLits(p, alloc);
++      p->litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb));
++      p->saveState.litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb));
++      if (p->litProbs == 0 || p->saveState.litProbs == 0)
++      {
++        LzmaEnc_FreeLits(p, alloc);
++        return SZ_ERROR_MEM;
++      }
++      p->lclp = lclp;
++    }
++  }
++
++  p->matchFinderBase.bigHash = (p->dictSize > kBigHashDicLimit);
++
++  if (beforeSize + p->dictSize < keepWindowSize)
++    beforeSize = keepWindowSize - p->dictSize;
++
++  #ifndef _7ZIP_ST
++  if (p->mtMode)
++  {
++    RINOK(MatchFinderMt_Create(&p->matchFinderMt, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig));
++    p->matchFinderObj = &p->matchFinderMt;
++    MatchFinderMt_CreateVTable(&p->matchFinderMt, &p->matchFinder);
++  }
++  else
++  #endif
++  {
++    if (!MatchFinder_Create(&p->matchFinderBase, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig))
++      return SZ_ERROR_MEM;
++    p->matchFinderObj = &p->matchFinderBase;
++    MatchFinder_CreateVTable(&p->matchFinderBase, &p->matchFinder);
++  }
++  return SZ_OK;
++}
++
++void LzmaEnc_Init(CLzmaEnc *p)
++{
++  UInt32 i;
++  p->state = 0;
++  for (i = 0 ; i < LZMA_NUM_REPS; i++)
++    p->reps[i] = 0;
++
++  RangeEnc_Init(&p->rc);
++
++
++  for (i = 0; i < kNumStates; i++)
++  {
++    UInt32 j;
++    for (j = 0; j < LZMA_NUM_PB_STATES_MAX; j++)
++    {
++      p->isMatch[i][j] = kProbInitValue;
++      p->isRep0Long[i][j] = kProbInitValue;
++    }
++    p->isRep[i] = kProbInitValue;
++    p->isRepG0[i] = kProbInitValue;
++    p->isRepG1[i] = kProbInitValue;
++    p->isRepG2[i] = kProbInitValue;
++  }
++
++  {
++    UInt32 num = 0x300 << (p->lp + p->lc);
++    for (i = 0; i < num; i++)
++      p->litProbs[i] = kProbInitValue;
++  }
++
++  {
++    for (i = 0; i < kNumLenToPosStates; i++)
++    {
++      CLzmaProb *probs = p->posSlotEncoder[i];
++      UInt32 j;
++      for (j = 0; j < (1 << kNumPosSlotBits); j++)
++        probs[j] = kProbInitValue;
++    }
++  }
++  {
++    for (i = 0; i < kNumFullDistances - kEndPosModelIndex; i++)
++      p->posEncoders[i] = kProbInitValue;
++  }
++
++  LenEnc_Init(&p->lenEnc.p);
++  LenEnc_Init(&p->repLenEnc.p);
++
++  for (i = 0; i < (1 << kNumAlignBits); i++)
++    p->posAlignEncoder[i] = kProbInitValue;
++
++  p->optimumEndIndex = 0;
++  p->optimumCurrentIndex = 0;
++  p->additionalOffset = 0;
++
++  p->pbMask = (1 << p->pb) - 1;
++  p->lpMask = (1 << p->lp) - 1;
++}
++
++void LzmaEnc_InitPrices(CLzmaEnc *p)
++{
++  if (!p->fastMode)
++  {
++    FillDistancesPrices(p);
++    FillAlignPrices(p);
++  }
++
++  p->lenEnc.tableSize =
++  p->repLenEnc.tableSize =
++      p->numFastBytes + 1 - LZMA_MATCH_LEN_MIN;
++  LenPriceEnc_UpdateTables(&p->lenEnc, 1 << p->pb, p->ProbPrices);
++  LenPriceEnc_UpdateTables(&p->repLenEnc, 1 << p->pb, p->ProbPrices);
++}
++
++static SRes LzmaEnc_AllocAndInit(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  UInt32 i;
++  for (i = 0; i < (UInt32)kDicLogSizeMaxCompress; i++)
++    if (p->dictSize <= ((UInt32)1 << i))
++      break;
++  p->distTableSize = i * 2;
++
++  p->finished = False;
++  p->result = SZ_OK;
++  RINOK(LzmaEnc_Alloc(p, keepWindowSize, alloc, allocBig));
++  LzmaEnc_Init(p);
++  LzmaEnc_InitPrices(p);
++  p->nowPos64 = 0;
++  return SZ_OK;
++}
++
++static SRes LzmaEnc_Prepare(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream,
++    ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  p->matchFinderBase.stream = inStream;
++  p->needInit = 1;
++  p->rc.outStream = outStream;
++  return LzmaEnc_AllocAndInit(p, 0, alloc, allocBig);
++}
++
++SRes LzmaEnc_PrepareForLzma2(CLzmaEncHandle pp,
++    ISeqInStream *inStream, UInt32 keepWindowSize,
++    ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  p->matchFinderBase.stream = inStream;
++  p->needInit = 1;
++  return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
++}
++
++static void LzmaEnc_SetInputBuf(CLzmaEnc *p, const Byte *src, SizeT srcLen)
++{
++  p->matchFinderBase.directInput = 1;
++  p->matchFinderBase.bufferBase = (Byte *)src;
++  p->matchFinderBase.directInputRem = srcLen;
++}
++
++SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen,
++    UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  LzmaEnc_SetInputBuf(p, src, srcLen);
++  p->needInit = 1;
++
++  return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
++}
++
++void LzmaEnc_Finish(CLzmaEncHandle pp)
++{
++  #ifndef _7ZIP_ST
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  if (p->mtMode)
++    MatchFinderMt_ReleaseStream(&p->matchFinderMt);
++  #else
++  pp = pp;
++  #endif
++}
++
++typedef struct
++{
++  ISeqOutStream funcTable;
++  Byte *data;
++  SizeT rem;
++  Bool overflow;
++} CSeqOutStreamBuf;
++
++static size_t MyWrite(void *pp, const void *data, size_t size)
++{
++  CSeqOutStreamBuf *p = (CSeqOutStreamBuf *)pp;
++  if (p->rem < size)
++  {
++    size = p->rem;
++    p->overflow = True;
++  }
++  memcpy(p->data, data, size);
++  p->rem -= size;
++  p->data += size;
++  return size;
++}
++
++
++UInt32 LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp)
++{
++  const CLzmaEnc *p = (CLzmaEnc *)pp;
++  return p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
++}
++
++const Byte *LzmaEnc_GetCurBuf(CLzmaEncHandle pp)
++{
++  const CLzmaEnc *p = (CLzmaEnc *)pp;
++  return p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
++}
++
++SRes LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit,
++    Byte *dest, size_t *destLen, UInt32 desiredPackSize, UInt32 *unpackSize)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  UInt64 nowPos64;
++  SRes res;
++  CSeqOutStreamBuf outStream;
++
++  outStream.funcTable.Write = MyWrite;
++  outStream.data = dest;
++  outStream.rem = *destLen;
++  outStream.overflow = False;
++
++  p->writeEndMark = False;
++  p->finished = False;
++  p->result = SZ_OK;
++
++  if (reInit)
++    LzmaEnc_Init(p);
++  LzmaEnc_InitPrices(p);
++  nowPos64 = p->nowPos64;
++  RangeEnc_Init(&p->rc);
++  p->rc.outStream = &outStream.funcTable;
++
++  res = LzmaEnc_CodeOneBlock(p, True, desiredPackSize, *unpackSize);
++  
++  *unpackSize = (UInt32)(p->nowPos64 - nowPos64);
++  *destLen -= outStream.rem;
++  if (outStream.overflow)
++    return SZ_ERROR_OUTPUT_EOF;
++
++  return res;
++}
++
++static SRes LzmaEnc_Encode2(CLzmaEnc *p, ICompressProgress *progress)
++{
++  SRes res = SZ_OK;
++
++  #ifndef _7ZIP_ST
++  Byte allocaDummy[0x300];
++  int i = 0;
++  for (i = 0; i < 16; i++)
++    allocaDummy[i] = (Byte)i;
++  #endif
++
++  for (;;)
++  {
++    res = LzmaEnc_CodeOneBlock(p, False, 0, 0);
++    if (res != SZ_OK || p->finished != 0)
++      break;
++    if (progress != 0)
++    {
++      res = progress->Progress(progress, p->nowPos64, RangeEnc_GetProcessed(&p->rc));
++      if (res != SZ_OK)
++      {
++        res = SZ_ERROR_PROGRESS;
++        break;
++      }
++    }
++  }
++  LzmaEnc_Finish(p);
++  return res;
++}
++
++SRes LzmaEnc_Encode(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream, ICompressProgress *progress,
++    ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  RINOK(LzmaEnc_Prepare(pp, outStream, inStream, alloc, allocBig));
++  return LzmaEnc_Encode2((CLzmaEnc *)pp, progress);
++}
++
++SRes LzmaEnc_WriteProperties(CLzmaEncHandle pp, Byte *props, SizeT *size)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  int i;
++  UInt32 dictSize = p->dictSize;
++  if (*size < LZMA_PROPS_SIZE)
++    return SZ_ERROR_PARAM;
++  *size = LZMA_PROPS_SIZE;
++  props[0] = (Byte)((p->pb * 5 + p->lp) * 9 + p->lc);
++
++  for (i = 11; i <= 30; i++)
++  {
++    if (dictSize <= ((UInt32)2 << i))
++    {
++      dictSize = (2 << i);
++      break;
++    }
++    if (dictSize <= ((UInt32)3 << i))
++    {
++      dictSize = (3 << i);
++      break;
++    }
++  }
++
++  for (i = 0; i < 4; i++)
++    props[1 + i] = (Byte)(dictSize >> (8 * i));
++  return SZ_OK;
++}
++
++SRes LzmaEnc_MemEncode(CLzmaEncHandle pp, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
++    int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  SRes res;
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++
++  CSeqOutStreamBuf outStream;
++
++  LzmaEnc_SetInputBuf(p, src, srcLen);
++
++  outStream.funcTable.Write = MyWrite;
++  outStream.data = dest;
++  outStream.rem = *destLen;
++  outStream.overflow = False;
++
++  p->writeEndMark = writeEndMark;
++
++  p->rc.outStream = &outStream.funcTable;
++  res = LzmaEnc_MemPrepare(pp, src, srcLen, 0, alloc, allocBig);
++  if (res == SZ_OK)
++    res = LzmaEnc_Encode2(p, progress);
++
++  *destLen -= outStream.rem;
++  if (outStream.overflow)
++    return SZ_ERROR_OUTPUT_EOF;
++  return res;
++}
++
++SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
++    const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
++    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  CLzmaEnc *p = (CLzmaEnc *)LzmaEnc_Create(alloc);
++  SRes res;
++  if (p == 0)
++    return SZ_ERROR_MEM;
++
++  res = LzmaEnc_SetProps(p, props);
++  if (res == SZ_OK)
++  {
++    res = LzmaEnc_WriteProperties(p, propsEncoded, propsSize);
++    if (res == SZ_OK)
++      res = LzmaEnc_MemEncode(p, dest, destLen, src, srcLen,
++          writeEndMark, progress, alloc, allocBig);
++  }
++
++  LzmaEnc_Destroy(p, alloc, allocBig);
++  return res;
++}
+--- /dev/null
++++ b/lib/lzma/Makefile
+@@ -0,0 +1,7 @@
++lzma_compress-objs := LzFind.o LzmaEnc.o
++lzma_decompress-objs := LzmaDec.o
++
++obj-$(CONFIG_LZMA_COMPRESS) += lzma_compress.o
++obj-$(CONFIG_LZMA_DECOMPRESS) += lzma_decompress.o
++
++EXTRA_CFLAGS += -Iinclude/linux -Iinclude/linux/lzma -include types.h
diff --git a/target/linux/generic/patches-2.6.33/011-mips_boot.patch b/target/linux/generic/patches-2.6.33/011-mips_boot.patch
new file mode 100644
index 0000000000..c2a043acde
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/011-mips_boot.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
+@@ -121,6 +121,8 @@
+ #endif
+ 	.endm
+ 
++	j kernel_entry
++	nop
+ #ifndef CONFIG_NO_EXCEPT_FILL
+ 	/*
+ 	 * Reserved space for exception handlers.
diff --git a/target/linux/generic/patches-2.6.33/012-extra_optimization.patch b/target/linux/generic/patches-2.6.33/012-extra_optimization.patch
new file mode 100644
index 0000000000..0b5174cbbd
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/012-extra_optimization.patch
@@ -0,0 +1,21 @@
+--- a/Makefile
++++ b/Makefile
+@@ -529,7 +529,7 @@ all: vmlinux
+ ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+ KBUILD_CFLAGS	+= -Os
+ else
+-KBUILD_CFLAGS	+= -O2
++KBUILD_CFLAGS	+= -O2 -fno-reorder-blocks -fno-tree-ch
+ endif
+ 
+ include $(srctree)/arch/$(SRCARCH)/Makefile
+@@ -567,6 +567,9 @@ endif
+ NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
+ CHECKFLAGS     += $(NOSTDINC_FLAGS)
+ 
++# improve gcc optimization
++CFLAGS += $(call cc-option,-funit-at-a-time,)
++
+ # warn about C99 declaration after statement
+ KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
+ 
diff --git a/target/linux/generic/patches-2.6.33/013-gcc4_inline_fix.patch b/target/linux/generic/patches-2.6.33/013-gcc4_inline_fix.patch
new file mode 100644
index 0000000000..77ab405439
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/013-gcc4_inline_fix.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/include/asm/system.h
++++ b/arch/mips/include/asm/system.h
+@@ -194,7 +194,7 @@ extern __u64 __xchg_u64_unsupported_on_3
+ #define __xchg_u64 __xchg_u64_unsupported_on_32bit_kernels
+ #endif
+ 
+-static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
++static __always_inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+ {
+ 	switch (size) {
+ 	case 4:
diff --git a/target/linux/generic/patches-2.6.33/014-samsung_flash.patch b/target/linux/generic/patches-2.6.33/014-samsung_flash.patch
new file mode 100644
index 0000000000..7010d367b8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/014-samsung_flash.patch
@@ -0,0 +1,50 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -325,6 +325,8 @@ static struct cfi_fixup fixup_table[] = 
+ static void cfi_fixup_major_minor(struct cfi_private *cfi,
+ 				  struct cfi_pri_amdstd *extp)
+ {
++	// manufacturers defined in include/linux/mtd/cfi.h
++
+ 	if (cfi->mfr == CFI_MFR_SAMSUNG && cfi->id == 0x257e &&
+ 	    extp->MajorVersion == '0')
+ 		extp->MajorVersion = '1';
+@@ -355,6 +357,9 @@ struct mtd_info *cfi_cmdset_0002(struct 
+ 	mtd->name    = map->name;
+ 	mtd->writesize = 1;
+ 
++	printk(" CFI mfr 0x%08x\n", cfi->mfr);	// TODO: Is there a more general place to print this info?
++	printk(" CFI id  0x%08x\n", cfi->id);
++
+ 	if (cfi->cfi_mode==CFI_MODE_CFI){
+ 		unsigned char bootloc;
+ 		/*
+@@ -373,16 +378,24 @@ struct mtd_info *cfi_cmdset_0002(struct 
+ 
+ 		cfi_fixup_major_minor(cfi, extp);
+ 
+-		if (extp->MajorVersion != '1' ||
+-		    (extp->MinorVersion < '0' || extp->MinorVersion > '4')) {
++		// valid primary extension versions are: 1.0, 1.1, 1.2, 1.3
++		// see: http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_r20.pdf, page 19 and on
++		//      http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_100_20011201.pdf
++		if (extp->MajorVersion < '1' ||
++		    extp->MajorVersion > '1' ||
++		    (extp->MajorVersion == '1' && ( extp->MinorVersion < '0' || extp->MinorVersion > '3'))) {
+ 			printk(KERN_ERR "  Unknown Amd/Fujitsu Extended Query "
+-			       "version %c.%c.\n",  extp->MajorVersion,
+-			       extp->MinorVersion);
++			       "version %c.%c (0x%02x/0x%02x).\n",
++			       extp->MajorVersion, extp->MinorVersion,
++			       extp->MajorVersion, extp->MinorVersion);
+ 			kfree(extp);
+ 			kfree(mtd);
+ 			return NULL;
+ 		}
+ 
++		printk("  Amd/Fujitsu Extended Query version %c.%c.\n",
++		       extp->MajorVersion, extp->MinorVersion);
++
+ 		/* Install our own private info structure */
+ 		cfi->cmdset_priv = extp;
+ 
diff --git a/target/linux/generic/patches-2.6.33/020-mips_multi_machine_support.patch b/target/linux/generic/patches-2.6.33/020-mips_multi_machine_support.patch
new file mode 100644
index 0000000000..111d69b4d9
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/020-mips_multi_machine_support.patch
@@ -0,0 +1,208 @@
+--- /dev/null
++++ b/arch/mips/include/asm/mips_machine.h
+@@ -0,0 +1,54 @@
++/*
++ *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ */
++
++#ifndef __ASM_MIPS_MACHINE_H
++#define __ASM_MIPS_MACHINE_H
++
++#include <linux/init.h>
++#include <linux/list.h>
++
++#include <asm/bootinfo.h>
++
++struct mips_machine {
++	unsigned long		mach_type;
++	const char		*mach_id;
++	const char		*mach_name;
++	void			(*mach_setup)(void);
++};
++
++#define MIPS_MACHINE(_type, _id, _name, _setup) 		\
++static const char machine_name_##_type[] __initconst		\
++			__aligned(1) = _name;			\
++static const char machine_id_##_type[] __initconst		\
++			__aligned(1) = _id;			\
++static struct mips_machine machine_##_type			\
++		__used __section(.mips.machines.init) =		\
++{								\
++	.mach_type	= _type,				\
++	.mach_id	= machine_id_##_type,			\
++	.mach_name	= machine_name_##_type,			\
++	.mach_setup	= _setup,				\
++};
++
++extern long __mips_machines_start;
++extern long __mips_machines_end;
++
++#ifdef CONFIG_MIPS_MACHINE
++int  mips_machtype_setup(char *id) __init;
++void mips_machine_setup(void) __init;
++void mips_set_machine_name(const char *name) __init;
++char *mips_get_machine_name(void);
++#else
++static inline int mips_machtype_setup(char *id) { return 1; }
++static inline void mips_machine_setup(void) { }
++static inline void mips_set_machine_name(const char *name) { }
++static inline char *mips_get_machine_name(void) { return NULL; }
++#endif /* CONFIG_MIPS_MACHINE */
++
++#endif /* __ASM_MIPS_MACHINE_H */
+--- /dev/null
++++ b/arch/mips/kernel/mips_machine.c
+@@ -0,0 +1,86 @@
++/*
++ *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ */
++#include <linux/mm.h>
++#include <linux/string.h>
++#include <linux/slab.h>
++
++#include <asm/mips_machine.h>
++
++static struct mips_machine *mips_machine __initdata;
++static char *mips_machine_name = "Unknown";
++
++#define for_each_machine(mach) \
++	for ((mach) = (struct mips_machine *)&__mips_machines_start; \
++	     (mach) && \
++	     (unsigned long)(mach) < (unsigned long)&__mips_machines_end; \
++	     (mach)++)
++
++__init void mips_set_machine_name(const char *name)
++{
++	char *p;
++
++	if (name == NULL)
++		return;
++
++	p = kstrdup(name, GFP_KERNEL);
++	if (!p)
++		pr_err("MIPS: no memory for machine_name\n");
++
++	mips_machine_name = p;
++}
++
++char *mips_get_machine_name(void)
++{
++	return mips_machine_name;
++}
++
++__init int mips_machtype_setup(char *id)
++{
++	struct mips_machine *mach;
++
++	for_each_machine(mach) {
++		if (mach->mach_id == NULL)
++			continue;
++
++		if (strcmp(mach->mach_id, id) == 0) {
++			mips_machtype = mach->mach_type;
++			return 0;
++		}
++	}
++
++	pr_err("MIPS: no machine found for id '%s', supported machines:\n", id);
++	pr_err("%-24s : %s\n", "id", "name");
++	for_each_machine(mach)
++		pr_err("%-24s : %s\n", mach->mach_id, mach->mach_name);
++
++	return 1;
++}
++
++__setup("machtype=", mips_machtype_setup);
++
++__init void mips_machine_setup(void)
++{
++	struct mips_machine *mach;
++
++	for_each_machine(mach) {
++		if (mips_machtype == mach->mach_type) {
++			mips_machine = mach;
++			break;
++		}
++	}
++
++	if (!mips_machine)
++		return;
++
++	mips_set_machine_name(mips_machine->mach_name);
++	pr_info("MIPS: machine is %s\n", mips_machine_name);
++
++	if (mips_machine->mach_setup)
++		mips_machine->mach_setup();
++}
+--- a/arch/mips/kernel/Makefile
++++ b/arch/mips/kernel/Makefile
+@@ -93,6 +93,7 @@ obj-$(CONFIG_GPIO_TXX9)		+= gpio_txx9.o
+ 
+ obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
+ obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
++obj-$(CONFIG_MIPS_MACHINE)	+= mips_machine.o
+ 
+ CFLAGS_cpu-bugs64.o	= $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
+ 
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -851,6 +851,9 @@ config MIPS_DISABLE_OBSOLETE_IDE
+ config SYNC_R4K
+ 	bool
+ 
++config MIPS_MACHINE
++	def_bool n
++
+ config NO_IOPORT
+ 	def_bool n
+ 
+--- a/arch/mips/kernel/proc.c
++++ b/arch/mips/kernel/proc.c
+@@ -12,6 +12,7 @@
+ #include <asm/cpu-features.h>
+ #include <asm/mipsregs.h>
+ #include <asm/processor.h>
++#include <asm/mips_machine.h>
+ 
+ unsigned int vced_count, vcei_count;
+ 
+@@ -31,8 +32,12 @@ static int show_cpuinfo(struct seq_file 
+ 	/*
+ 	 * For the first processor also print the system type
+ 	 */
+-	if (n == 0)
++	if (n == 0) {
+ 		seq_printf(m, "system type\t\t: %s\n", get_system_type());
++		if (mips_get_machine_name())
++			seq_printf(m, "machine\t\t\t: %s\n",
++				   mips_get_machine_name());
++	}
+ 
+ 	seq_printf(m, "processor\t\t: %ld\n", n);
+ 	sprintf(fmt, "cpu model\t\t: %%s V%%d.%%d%s\n",
+--- a/arch/mips/kernel/vmlinux.lds.S
++++ b/arch/mips/kernel/vmlinux.lds.S
+@@ -98,6 +98,13 @@ SECTIONS
+ 	INIT_TEXT_SECTION(PAGE_SIZE)
+ 	INIT_DATA_SECTION(16)
+ 
++	. = ALIGN(4);
++	.mips.machines.init : AT(ADDR(.mips.machines.init) - LOAD_OFFSET) {
++		__mips_machines_start = .;
++		*(.mips.machines.init)
++		__mips_machines_end = .;
++	}
++
+ 	/* .exit.text is discarded at runtime, not link time, to deal with
+ 	 * references from .rodata
+ 	 */
diff --git a/target/linux/generic/patches-2.6.33/021-mips_image_cmdline_hack.patch b/target/linux/generic/patches-2.6.33/021-mips_image_cmdline_hack.patch
new file mode 100644
index 0000000000..00de8d5450
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/021-mips_image_cmdline_hack.patch
@@ -0,0 +1,28 @@
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -854,6 +854,10 @@ config SYNC_R4K
+ config MIPS_MACHINE
+ 	def_bool n
+ 
++config IMAGE_CMDLINE_HACK
++	bool "OpenWrt specific image command line hack"
++	default n
++
+ config NO_IOPORT
+ 	def_bool n
+ 
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
+@@ -143,6 +143,12 @@ FEXPORT(__kernel_entry)
+ 	j	kernel_entry
+ #endif
+ 
++#ifdef CONFIG_IMAGE_CMDLINE_HACK
++	.ascii	"CMDLINE:"
++EXPORT(__image_cmdline)
++	.fill	0x400
++#endif /* CONFIG_IMAGE_CMDLINE_HACK */
++
+ 	__REF
+ 
+ NESTED(kernel_entry, 16, sp)			# kernel entry point
diff --git a/target/linux/generic/patches-2.6.33/022-mips_use_generic_thread_info_allocator.patch b/target/linux/generic/patches-2.6.33/022-mips_use_generic_thread_info_allocator.patch
new file mode 100644
index 0000000000..786afd1dc6
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/022-mips_use_generic_thread_info_allocator.patch
@@ -0,0 +1,18 @@
+--- a/arch/mips/include/asm/thread_info.h
++++ b/arch/mips/include/asm/thread_info.h
+@@ -83,6 +83,7 @@ register struct thread_info *__current_t
+ #define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER)
+ #define THREAD_MASK (THREAD_SIZE - 1UL)
+ 
++#if 0
+ #define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+ 
+ #ifdef CONFIG_DEBUG_STACK_USAGE
+@@ -92,6 +93,7 @@ register struct thread_info *__current_t
+ #endif
+ 
+ #define free_thread_info(info) kfree(info)
++#endif
+ 
+ #endif /* !__ASSEMBLY__ */
+ 
diff --git a/target/linux/generic/patches-2.6.33/023-mips-fix-kexec.patch b/target/linux/generic/patches-2.6.33/023-mips-fix-kexec.patch
new file mode 100644
index 0000000000..e6928dde91
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/023-mips-fix-kexec.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/kernel/machine_kexec.c
++++ b/arch/mips/kernel/machine_kexec.c
+@@ -52,7 +52,7 @@ machine_kexec(struct kimage *image)
+ 	reboot_code_buffer =
+ 	  (unsigned long)page_address(image->control_code_page);
+ 
+-	kexec_start_address = image->start;
++	kexec_start_address = (unsigned long) phys_to_virt(image->start);
+ 	kexec_indirection_page =
+ 		(unsigned long) phys_to_virt(image->head & PAGE_MASK);
+ 
diff --git a/target/linux/generic/patches-2.6.33/025-mips_disable_fpu.patch b/target/linux/generic/patches-2.6.33/025-mips_disable_fpu.patch
new file mode 100644
index 0000000000..e6b764e2df
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/025-mips_disable_fpu.patch
@@ -0,0 +1,161 @@
+MIPS: allow disabling the kernel FPU emulator
+
+This patch allows turning off the in-kernel Algorithmics
+FPU emulator support, which allows one to save a couple of
+precious blocks on an embedded system.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+--
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -839,6 +839,17 @@ config I8259
+ config MIPS_BONITO64
+ 	bool
+ 
++config MIPS_FPU_EMU
++	bool "Enable FPU emulation"
++	default y
++	help
++	   This option allows building a kernel with or without the Algorithmics
++	   FPU emulator enabled. Turning off this option results in a kernel which
++	   does not catch floating operations exceptions. Make sure that your toolchain
++	   is configured to enable software floating point emulation in that case.
++		
++	   If unsure say Y here.
++
+ config MIPS_MSC
+ 	bool
+ 
+--- a/arch/mips/math-emu/Makefile
++++ b/arch/mips/math-emu/Makefile
+@@ -2,12 +2,14 @@
+ # Makefile for the Linux/MIPS kernel FPU emulation.
+ #
+ 
+-obj-y	:= cp1emu.o ieee754m.o ieee754d.o ieee754dp.o ieee754sp.o ieee754.o \
++obj-y	:=	kernel_linkage.o dsemul.o cp1emu.o
++
++obj-$(CONFIG_MIPS_FPU_EMU)	+= ieee754m.o ieee754d.o ieee754dp.o ieee754sp.o ieee754.o \
+ 	   ieee754xcpt.o dp_frexp.o dp_modf.o dp_div.o dp_mul.o dp_sub.o \
+ 	   dp_add.o dp_fsp.o dp_cmp.o dp_logb.o dp_scalb.o dp_simple.o \
+ 	   dp_tint.o dp_fint.o dp_tlong.o dp_flong.o sp_frexp.o sp_modf.o \
+ 	   sp_div.o sp_mul.o sp_sub.o sp_add.o sp_fdp.o sp_cmp.o sp_logb.o \
+ 	   sp_scalb.o sp_simple.o sp_tint.o sp_fint.o sp_tlong.o sp_flong.o \
+-	   dp_sqrt.o sp_sqrt.o kernel_linkage.o dsemul.o
++	   dp_sqrt.o sp_sqrt.o
+ 
+ EXTRA_CFLAGS += -Werror
+--- a/arch/mips/math-emu/cp1emu.c
++++ b/arch/mips/math-emu/cp1emu.c
+@@ -58,7 +58,11 @@
+ #define __mips 4
+ 
+ /* Function which emulates a floating point instruction. */
++#ifdef CONFIG_DEBUG_FS
++DEFINE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats);
++#endif
+ 
++#ifdef CONFIG_MIPS_FPU_EMU
+ static int fpu_emu(struct pt_regs *, struct mips_fpu_struct *,
+ 	mips_instruction);
+ 
+@@ -69,10 +73,6 @@ static int fpux_emu(struct pt_regs *,
+ 
+ /* Further private data for which no space exists in mips_fpu_struct */
+ 
+-#ifdef CONFIG_DEBUG_FS
+-DEFINE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats);
+-#endif
+-
+ /* Control registers */
+ 
+ #define FPCREG_RID	0	/* $0  = revision id */
+@@ -1277,7 +1277,6 @@ int fpu_emulator_cop1Handler(struct pt_r
+ 
+ 	return sig;
+ }
+-
+ #ifdef CONFIG_DEBUG_FS
+ 
+ static int fpuemu_stat_get(void *data, u64 *val)
+@@ -1326,4 +1325,11 @@ static int __init debugfs_fpuemu(void)
+ 	return 0;
+ }
+ __initcall(debugfs_fpuemu);
+-#endif
++#endif /* CONFIG_DEBUGFS */
++#else
++int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
++        int has_fpu)
++{
++	return 0;
++}
++#endif /* CONFIG_MIPS_FPU_EMU */
+--- a/arch/mips/math-emu/dsemul.c
++++ b/arch/mips/math-emu/dsemul.c
+@@ -109,6 +109,7 @@ int mips_dsemul(struct pt_regs *regs, mi
+ 	return SIGILL;		/* force out of emulation loop */
+ }
+ 
++#ifdef CONFIG_MIPS_FPU_EMU
+ int do_dsemulret(struct pt_regs *xcp)
+ {
+ 	struct emuframe __user *fr;
+@@ -165,3 +166,9 @@ int do_dsemulret(struct pt_regs *xcp)
+ 
+ 	return 1;
+ }
++#else
++int do_dsemulret(struct pt_regs *xcp)
++{
++	return 0;
++}
++#endif /* CONFIG_MIPS_FPU_EMU */
+--- a/arch/mips/math-emu/kernel_linkage.c
++++ b/arch/mips/math-emu/kernel_linkage.c
+@@ -29,6 +29,7 @@
+ 
+ #define SIGNALLING_NAN 0x7ff800007ff80000LL
+ 
++#ifdef CONFIG_MIPS_FPU_EMU
+ void fpu_emulator_init_fpu(void)
+ {
+ 	static int first = 1;
+@@ -112,4 +113,36 @@ int fpu_emulator_restore_context32(struc
+ 
+ 	return err;
+ }
+-#endif
++#endif	/* CONFIG_64BIT */
++#else
++
++void fpu_emulator_init_fpu(void)
++{
++	printk(KERN_INFO "FPU emulator disabled, make sure your toolchain"
++		"was compiled with software floating point support (soft-float)\n");
++	return;
++}
++
++int fpu_emulator_save_context(struct sigcontext __user *sc)
++{
++	return 0;
++}
++
++int fpu_emulator_restore_context(struct sigcontext __user *sc)
++{
++	return 0;
++}
++
++int fpu_emulator_save_context32(struct sigcontext32 __user *sc)
++{
++	return 0;
++}
++
++int fpu_emulator_restore_context32(struct sigcontext32 __user *sc)
++{
++	return 0;
++}
++
++#ifdef CONFIG_64BIT
++#endif	/* CONFIG_64BIT */
++#endif /* CONFIG_MIPS_FPU_EMU */
diff --git a/target/linux/generic/patches-2.6.33/027-mips_module_reloc.patch b/target/linux/generic/patches-2.6.33/027-mips_module_reloc.patch
new file mode 100644
index 0000000000..024e7f16cd
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/027-mips_module_reloc.patch
@@ -0,0 +1,368 @@
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -93,7 +93,7 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin
+ cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe
+ cflags-y			+= -msoft-float
+ LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
+-MODFLAGS			+= -mlong-calls
++MODFLAGS			+= -mno-long-calls
+ 
+ cflags-y += -ffreestanding
+ 
+--- a/arch/mips/include/asm/module.h
++++ b/arch/mips/include/asm/module.h
+@@ -9,6 +9,11 @@ struct mod_arch_specific {
+ 	struct list_head dbe_list;
+ 	const struct exception_table_entry *dbe_start;
+ 	const struct exception_table_entry *dbe_end;
++
++	void *phys_plt_tbl;
++	void *virt_plt_tbl;
++	unsigned int phys_plt_offset;
++	unsigned int virt_plt_offset;
+ };
+ 
+ typedef uint8_t Elf64_Byte;		/* Type for a 8-bit quantity.  */
+--- a/arch/mips/kernel/module.c
++++ b/arch/mips/kernel/module.c
+@@ -43,6 +43,117 @@ static struct mips_hi16 *mips_hi16_list;
+ static LIST_HEAD(dbe_list);
+ static DEFINE_SPINLOCK(dbe_lock);
+ 
++/*
++ * Get the potential max trampolines size required of the init and
++ * non-init sections. Only used if we cannot find enough contiguous
++ * physically mapped memory to put the module into.
++ */
++static unsigned int
++get_plt_size(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
++             const char *secstrings, unsigned int symindex, bool is_init)
++{
++	unsigned long ret = 0;
++	unsigned int i, j;
++	Elf_Sym *syms;
++
++	/* Everything marked ALLOC (this includes the exported symbols) */
++	for (i = 1; i < hdr->e_shnum; ++i) {
++		unsigned int info = sechdrs[i].sh_info;
++
++		if (sechdrs[i].sh_type != SHT_REL
++		    && sechdrs[i].sh_type != SHT_RELA)
++			continue;
++
++		/* Not a valid relocation section? */
++		if (info >= hdr->e_shnum)
++			continue;
++
++		/* Don't bother with non-allocated sections */
++		if (!(sechdrs[info].sh_flags & SHF_ALLOC))
++			continue;
++
++		/* If it's called *.init*, and we're not init, we're
++                   not interested */
++		if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0)
++		    != is_init)
++			continue;
++
++		syms = (Elf_Sym *) sechdrs[symindex].sh_addr;
++		if (sechdrs[i].sh_type == SHT_REL) {
++			Elf_Mips_Rel *rel = (void *) sechdrs[i].sh_addr;
++			unsigned int size = sechdrs[i].sh_size / sizeof(*rel);
++
++			for (j = 0; j < size; ++j) {
++				Elf_Sym *sym;
++
++				if (ELF_MIPS_R_TYPE(rel[j]) != R_MIPS_26)
++					continue;
++
++				sym = syms + ELF_MIPS_R_SYM(rel[j]);
++				if (!is_init && sym->st_shndx != SHN_UNDEF)
++					continue;
++
++				ret += 4 * sizeof(int);
++			}
++		} else {
++			Elf_Mips_Rela *rela = (void *) sechdrs[i].sh_addr;
++			unsigned int size = sechdrs[i].sh_size / sizeof(*rela);
++
++			for (j = 0; j < size; ++j) {
++				Elf_Sym *sym;
++
++				if (ELF_MIPS_R_TYPE(rela[j]) != R_MIPS_26)
++					continue;
++
++				sym = syms + ELF_MIPS_R_SYM(rela[j]);
++				if (!is_init && sym->st_shndx != SHN_UNDEF)
++					continue;
++
++				ret += 4 * sizeof(int);
++			}
++		}
++	}
++
++	return ret;
++}
++
++#ifndef MODULE_START
++static void *alloc_phys(unsigned long size)
++{
++	unsigned order;
++	struct page *page;
++	struct page *p;
++
++	size = PAGE_ALIGN(size);
++	order = get_order(size);
++
++	page = alloc_pages(GFP_KERNEL | __GFP_NORETRY | __GFP_NOWARN |
++			__GFP_THISNODE, order);
++	if (!page)
++		return NULL;
++
++	split_page(page, order);
++
++	for (p = page + (size >> PAGE_SHIFT); p < page + (1 << order); ++p)
++		__free_page(p);
++
++	return page_address(page);
++}
++#endif
++
++static void free_phys(void *ptr, unsigned long size)
++{
++	struct page *page;
++	struct page *end;
++
++	page = virt_to_page(ptr);
++	end = page + (PAGE_ALIGN(size) >> PAGE_SHIFT);
++
++	for (; page < end; ++page)
++		__free_page(page);
++}
++
++
+ void *module_alloc(unsigned long size)
+ {
+ #ifdef MODULE_START
+@@ -58,21 +169,99 @@ void *module_alloc(unsigned long size)
+ 
+ 	return __vmalloc_area(area, GFP_KERNEL, PAGE_KERNEL);
+ #else
++	void *ptr;
++
+ 	if (size == 0)
+ 		return NULL;
+-	return vmalloc(size);
++
++	ptr = alloc_phys(size);
++
++	/* If we failed to allocate physically contiguous memory,
++	 * fall back to regular vmalloc. The module loader code will
++	 * create jump tables to handle long jumps */
++	if (!ptr)
++		return vmalloc(size);
++
++	return ptr;
++#endif
++}
++
++static inline bool is_phys_addr(void *ptr)
++{
++#ifdef CONFIG_64BIT
++	return (KSEGX((unsigned long)ptr) == CKSEG0);
++#else
++	return (KSEGX(ptr) == KSEG0);
+ #endif
+ }
+ 
+ /* Free memory returned from module_alloc */
+ void module_free(struct module *mod, void *module_region)
+ {
+-	vfree(module_region);
++	if (is_phys_addr(module_region)) {
++		if (mod->module_init == module_region)
++			free_phys(module_region, mod->init_size);
++		else if (mod->module_core == module_region)
++			free_phys(module_region, mod->core_size);
++		else
++			BUG();
++	} else {
++		vfree(module_region);
++	}
++}
++
++static void *__module_alloc(int size, bool phys)
++{
++	void *ptr;
++
++	if (phys)
++		ptr = kmalloc(size, GFP_KERNEL);
++	else
++		ptr = vmalloc(size);
++	return ptr;
++}
++
++static void __module_free(void *ptr)
++{
++	if (is_phys_addr(ptr))
++		kfree(ptr);
++	else
++		vfree(ptr);
+ }
+ 
+ int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
+ 			      char *secstrings, struct module *mod)
+ {
++	unsigned int symindex = 0;
++	unsigned int core_size, init_size;
++	int i;
++
++	for (i = 1; i < hdr->e_shnum; i++)
++		if (sechdrs[i].sh_type == SHT_SYMTAB)
++			symindex = i;
++
++	core_size = get_plt_size(hdr, sechdrs, secstrings, symindex, false);
++	init_size = get_plt_size(hdr, sechdrs, secstrings, symindex, true);
++
++	mod->arch.phys_plt_offset = 0;
++	mod->arch.virt_plt_offset = 0;
++	mod->arch.phys_plt_tbl = NULL;
++	mod->arch.virt_plt_tbl = NULL;
++
++	if ((core_size + init_size) == 0)
++		return 0;
++
++	mod->arch.phys_plt_tbl = __module_alloc(core_size + init_size, 1);
++	if (!mod->arch.phys_plt_tbl)
++		return -ENOMEM;
++
++	mod->arch.virt_plt_tbl = __module_alloc(core_size + init_size, 0);
++	if (!mod->arch.virt_plt_tbl) {
++		__module_free(mod->arch.phys_plt_tbl);
++		mod->arch.phys_plt_tbl = NULL;
++		return -ENOMEM;
++	}
++
+ 	return 0;
+ }
+ 
+@@ -95,28 +284,36 @@ static int apply_r_mips_32_rela(struct m
+ 	return 0;
+ }
+ 
+-static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
++static Elf_Addr add_plt_entry_to(unsigned *plt_offset,
++				 void *start, Elf_Addr v)
+ {
+-	if (v % 4) {
+-		pr_err("module %s: dangerous R_MIPS_26 REL relocation\n",
+-		       me->name);
+-		return -ENOEXEC;
+-	}
++	unsigned *tramp = start + *plt_offset;
++	*plt_offset += 4 * sizeof(int);
+ 
+-	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+-		printk(KERN_ERR
+-		       "module %s: relocation overflow\n",
+-		       me->name);
+-		return -ENOEXEC;
+-	}
++	/* adjust carry for addiu */
++	if (v & 0x00008000)
++		v += 0x10000;
+ 
+-	*location = (*location & ~0x03ffffff) |
+-	            ((*location + (v >> 2)) & 0x03ffffff);
++	tramp[0] = 0x3c190000 | (v >> 16);      /* lui t9, hi16 */
++	tramp[1] = 0x27390000 | (v & 0xffff);   /* addiu t9, t9, lo16 */
++	tramp[2] = 0x03200008;                  /* jr t9 */
++	tramp[3] = 0x00000000;                  /* nop */
+ 
+-	return 0;
++	return (Elf_Addr) tramp;
+ }
+ 
+-static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v)
++static Elf_Addr add_plt_entry(struct module *me, void *location, Elf_Addr v)
++{
++	if (is_phys_addr(location))
++		return add_plt_entry_to(&me->arch.phys_plt_offset,
++				me->arch.phys_plt_tbl, v);
++	else
++		return add_plt_entry_to(&me->arch.virt_plt_offset,
++				me->arch.virt_plt_tbl, v);
++
++}
++
++static int set_r_mips_26(struct module *me, u32 *location, u32 ofs, Elf_Addr v)
+ {
+ 	if (v % 4) {
+ 		pr_err("module %s: dangerous R_MIPS_26 RELArelocation\n",
+@@ -125,17 +322,31 @@ static int apply_r_mips_26_rela(struct m
+ 	}
+ 
+ 	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+-		printk(KERN_ERR
++	    v = add_plt_entry(me, location, v + (ofs << 2));
++		if (!v) {
++			printk(KERN_ERR
+ 		       "module %s: relocation overflow\n",
+ 		       me->name);
+-		return -ENOEXEC;
++			return -ENOEXEC;
++		}
++		ofs = 0;
+ 	}
+ 
+-	*location = (*location & ~0x03ffffff) | ((v >> 2) & 0x03ffffff);
++	*location = (*location & ~0x03ffffff) | ((ofs + (v >> 2)) & 0x03ffffff);
+ 
+ 	return 0;
+ }
+ 
++static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
++{
++	return set_r_mips_26(me, location, *location & 0x03ffffff, v);
++}
++
++static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v)
++{
++	return set_r_mips_26(me, location, 0, v);
++}
++
+ static int apply_r_mips_hi16_rel(struct module *me, u32 *location, Elf_Addr v)
+ {
+ 	struct mips_hi16 *n;
+@@ -400,11 +611,32 @@ int module_finalize(const Elf_Ehdr *hdr,
+ 		list_add(&me->arch.dbe_list, &dbe_list);
+ 		spin_unlock_irq(&dbe_lock);
+ 	}
++
++	/* Get rid of the fixup trampoline if we're running the module
++	 * from physically mapped address space */
++	if (me->arch.phys_plt_offset == 0) {
++		__module_free(me->arch.phys_plt_tbl);
++		me->arch.phys_plt_tbl = NULL;
++	}
++	if (me->arch.virt_plt_offset == 0) {
++		__module_free(me->arch.virt_plt_tbl);
++		me->arch.virt_plt_tbl = NULL;
++	}
++
+ 	return 0;
+ }
+ 
+ void module_arch_cleanup(struct module *mod)
+ {
++	if (mod->arch.phys_plt_tbl) {
++		__module_free(mod->arch.phys_plt_tbl);
++		mod->arch.phys_plt_tbl = NULL;
++	}
++	if (mod->arch.virt_plt_tbl) {
++		__module_free(mod->arch.virt_plt_tbl);
++		mod->arch.virt_plt_tbl = NULL;
++	}
++
+ 	spin_lock_irq(&dbe_lock);
+ 	list_del(&mod->arch.dbe_list);
+ 	spin_unlock_irq(&dbe_lock);
diff --git a/target/linux/generic/patches-2.6.33/028-module_exports.patch b/target/linux/generic/patches-2.6.33/028-module_exports.patch
new file mode 100644
index 0000000000..c56fbb79d8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/028-module_exports.patch
@@ -0,0 +1,119 @@
+--- a/include/asm-generic/vmlinux.lds.h
++++ b/include/asm-generic/vmlinux.lds.h
+@@ -52,6 +52,27 @@
+ #define LOAD_OFFSET 0
+ #endif
+ 
++#ifndef SYMTAB_KEEP_STR
++#define SYMTAB_KEEP_STR *(__ksymtab_strings.*)
++#define SYMTAB_DISCARD_STR
++#else
++#define SYMTAB_DISCARD_STR *(__ksymtab_strings.*)
++#endif
++
++#ifndef SYMTAB_KEEP
++#define SYMTAB_KEEP *(__ksymtab.*)
++#define SYMTAB_DISCARD
++#else
++#define SYMTAB_DISCARD *(__ksymtab.*)
++#endif
++
++#ifndef SYMTAB_KEEP_GPL
++#define SYMTAB_KEEP_GPL *(__ksymtab_gpl.*)
++#define SYMTAB_DISCARD_GPL
++#else
++#define SYMTAB_DISCARD_GPL *(__ksymtab_gpl.*)
++#endif
++
+ #ifndef SYMBOL_PREFIX
+ #define VMLINUX_SYMBOL(sym) sym
+ #else
+@@ -258,35 +279,35 @@
+ 	/* Kernel symbol table: Normal symbols */			\
+ 	__ksymtab         : AT(ADDR(__ksymtab) - LOAD_OFFSET) {		\
+ 		VMLINUX_SYMBOL(__start___ksymtab) = .;			\
+-		*(__ksymtab)						\
++		SYMTAB_KEEP						\
+ 		VMLINUX_SYMBOL(__stop___ksymtab) = .;			\
+ 	}								\
+ 									\
+ 	/* Kernel symbol table: GPL-only symbols */			\
+ 	__ksymtab_gpl     : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) {	\
+ 		VMLINUX_SYMBOL(__start___ksymtab_gpl) = .;		\
+-		*(__ksymtab_gpl)					\
++		SYMTAB_KEEP_GPL						\
+ 		VMLINUX_SYMBOL(__stop___ksymtab_gpl) = .;		\
+ 	}								\
+ 									\
+ 	/* Kernel symbol table: Normal unused symbols */		\
+ 	__ksymtab_unused  : AT(ADDR(__ksymtab_unused) - LOAD_OFFSET) {	\
+ 		VMLINUX_SYMBOL(__start___ksymtab_unused) = .;		\
+-		*(__ksymtab_unused)					\
++		*(__ksymtab_unused.*)					\
+ 		VMLINUX_SYMBOL(__stop___ksymtab_unused) = .;		\
+ 	}								\
+ 									\
+ 	/* Kernel symbol table: GPL-only unused symbols */		\
+ 	__ksymtab_unused_gpl : AT(ADDR(__ksymtab_unused_gpl) - LOAD_OFFSET) { \
+ 		VMLINUX_SYMBOL(__start___ksymtab_unused_gpl) = .;	\
+-		*(__ksymtab_unused_gpl)					\
++		*(__ksymtab_unused_gpl.*)				\
+ 		VMLINUX_SYMBOL(__stop___ksymtab_unused_gpl) = .;	\
+ 	}								\
+ 									\
+ 	/* Kernel symbol table: GPL-future-only symbols */		\
+ 	__ksymtab_gpl_future : AT(ADDR(__ksymtab_gpl_future) - LOAD_OFFSET) { \
+ 		VMLINUX_SYMBOL(__start___ksymtab_gpl_future) = .;	\
+-		*(__ksymtab_gpl_future)					\
++		*(__ksymtab_gpl_future.*)				\
+ 		VMLINUX_SYMBOL(__stop___ksymtab_gpl_future) = .;	\
+ 	}								\
+ 									\
+@@ -327,7 +348,7 @@
+ 									\
+ 	/* Kernel symbol table: strings */				\
+         __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) {	\
+-		*(__ksymtab_strings)					\
++		SYMTAB_KEEP_STR						\
+ 	}								\
+ 									\
+ 	/* __*init sections */						\
+@@ -642,6 +663,9 @@
+ 	EXIT_TEXT							\
+ 	EXIT_DATA							\
+ 	EXIT_CALL							\
++	SYMTAB_DISCARD							\
++	SYMTAB_DISCARD_GPL						\
++	SYMTAB_DISCARD_STR						\
+ 	*(.discard)							\
+ 	}
+ 
+--- a/include/linux/module.h
++++ b/include/linux/module.h
+@@ -194,16 +194,24 @@ void *__symbol_get_gpl(const char *symbo
+ #define __CRC_SYMBOL(sym, sec)
+ #endif
+ 
++#ifdef MODULE
++#define __EXPORT_SUFFIX(sym)
++#else
++#define __EXPORT_SUFFIX(sym) "." #sym
++#endif
++
+ /* For every exported symbol, place a struct in the __ksymtab section */
+ #define __EXPORT_SYMBOL(sym, sec)				\
+ 	extern typeof(sym) sym;					\
+ 	__CRC_SYMBOL(sym, sec)					\
+ 	static const char __kstrtab_##sym[]			\
+-	__attribute__((section("__ksymtab_strings"), aligned(1))) \
++	__attribute__((section("__ksymtab_strings"		\
++	  __EXPORT_SUFFIX(sym)), aligned(1)))			\
+ 	= MODULE_SYMBOL_PREFIX #sym;                    	\
+ 	static const struct kernel_symbol __ksymtab_##sym	\
+ 	__used							\
+-	__attribute__((section("__ksymtab" sec), unused))	\
++	__attribute__((section("__ksymtab" sec			\
++	  __EXPORT_SUFFIX(sym)), unused))			\
+ 	= { (unsigned long)&sym, __kstrtab_##sym }
+ 
+ #define EXPORT_SYMBOL(sym)					\
diff --git a/target/linux/generic/patches-2.6.33/029-arm_module_unresolved_weak_sym.patch b/target/linux/generic/patches-2.6.33/029-arm_module_unresolved_weak_sym.patch
new file mode 100644
index 0000000000..8a3b2e23cb
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/029-arm_module_unresolved_weak_sym.patch
@@ -0,0 +1,13 @@
+--- a/arch/arm/kernel/module.c
++++ b/arch/arm/kernel/module.c
+@@ -121,6 +121,10 @@ apply_relocate(Elf32_Shdr *sechdrs, cons
+ 			return -ENOEXEC;
+ 		}
+ 
++		if ((IS_ERR_VALUE(sym->st_value) || !sym->st_value) &&
++		    ELF_ST_BIND(sym->st_info) == STB_WEAK)
++			continue;
++
+ 		loc = dstsec->sh_addr + rel->r_offset;
+ 
+ 		switch (ELF32_R_TYPE(rel->r_info)) {
diff --git a/target/linux/generic/patches-2.6.33/030-pci_disable_common_quirks.patch b/target/linux/generic/patches-2.6.33/030-pci_disable_common_quirks.patch
new file mode 100644
index 0000000000..492d46d4d4
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/030-pci_disable_common_quirks.patch
@@ -0,0 +1,43 @@
+--- a/drivers/pci/Kconfig
++++ b/drivers/pci/Kconfig
+@@ -51,6 +51,12 @@ config PCI_STUB
+ 
+ 	  When in doubt, say N.
+ 
++config PCI_DISABLE_COMMON_QUIRKS
++	bool "PCI disable common quirks"
++	depends on PCI
++	help
++	  If you don't know what to do here, say N.
++
+ config HT_IRQ
+ 	bool "Interrupts on hypertransport devices"
+ 	default y
+--- a/drivers/pci/quirks.c
++++ b/drivers/pci/quirks.c
+@@ -96,6 +96,7 @@ static void __devinit quirk_resource_ali
+ }
+ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_resource_alignment);
+ 
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
+ /* The Mellanox Tavor device gives false positive parity errors
+  * Mark this device with a broken_parity_status, to allow
+  * PCI scanning code to "skip" this now blacklisted device.
+@@ -1905,7 +1906,9 @@ static void __devinit fixup_rev1_53c810(
+ 	}
+ }
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
++#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
+ 
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
+ /* Enable 1k I/O space granularity on the Intel P64H2 */
+ static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
+ {
+@@ -2537,6 +2540,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1518, quirk_i82576_sriov);
+ 
+ #endif	/* CONFIG_PCI_IOV */
++#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
+ 
+ static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
+ 			  struct pci_fixup *end)
diff --git a/target/linux/generic/patches-2.6.33/031-ppc_gcc_build_fix.patch b/target/linux/generic/patches-2.6.33/031-ppc_gcc_build_fix.patch
new file mode 100644
index 0000000000..60027948eb
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/031-ppc_gcc_build_fix.patch
@@ -0,0 +1,226 @@
+GCC 4.4.x looks to be adding support for generating out-of-line register
+saves/restores based on:
+
+http://gcc.gnu.org/ml/gcc-patches/2008-04/msg01678.html
+
+This breaks the kernel build as we'd have to link with libgcc to get the
+implementation of the register save/restores.
+
+To workaround this issue, we just stole the save/restore code from gcc
+and simplified it down for our needs (integer only).  We only do this if
+PPC32 as gcc makes believe the linker on ppc64 will deal with this and
+only if CONFIG_CC_OPTIMIZE_FOR_SIZE is set (thus -Os).
+
+Signed-off-by: Kumar Gala <[EMAIL PROTECTED]>
+---
+
+If someone using cutting edge toolchains for ppc64 could test and make
+sure if we enable CONFIG_CC_OPTIMIZE_FOR_SIZE things work that would be
+nice.
+
+- k
+
+ arch/powerpc/kernel/misc_32.S   |   77 +++++++++++++++++++++++++++
+ arch/powerpc/kernel/ppc_ksyms.c |  111 +++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 188 insertions(+), 0 deletions(-)
+
+--- a/arch/powerpc/kernel/misc_32.S
++++ b/arch/powerpc/kernel/misc_32.S
+@@ -802,3 +802,80 @@ relocate_new_kernel_end:
+ relocate_new_kernel_size:
+ 	.long relocate_new_kernel_end - relocate_new_kernel
+ #endif
++
++#if defined(CONFIG_PPC32) && defined(CONFIG_CC_OPTIMIZE_FOR_SIZE)
++/* Routines for saving integer registers, called by the compiler.  */
++/* Called with r11 pointing to the stack header word of the caller of the */
++/* function, just beyond the end of the integer save area.  */
++
++_GLOBAL(_savegpr_14)   stw     14,-72(11)      /* save gp registers */
++_GLOBAL(_savegpr_15)   stw     15,-68(11)
++_GLOBAL(_savegpr_16)   stw     16,-64(11)
++_GLOBAL(_savegpr_17)   stw     17,-60(11)
++_GLOBAL(_savegpr_18)   stw     18,-56(11)
++_GLOBAL(_savegpr_19)   stw     19,-52(11)
++_GLOBAL(_savegpr_20)   stw     20,-48(11)
++_GLOBAL(_savegpr_21)   stw     21,-44(11)
++_GLOBAL(_savegpr_22)   stw     22,-40(11)
++_GLOBAL(_savegpr_23)   stw     23,-36(11)
++_GLOBAL(_savegpr_24)   stw     24,-32(11)
++_GLOBAL(_savegpr_25)   stw     25,-28(11)
++_GLOBAL(_savegpr_26)   stw     26,-24(11)
++_GLOBAL(_savegpr_27)   stw     27,-20(11)
++_GLOBAL(_savegpr_28)   stw     28,-16(11)
++_GLOBAL(_savegpr_29)   stw     29,-12(11)
++_GLOBAL(_savegpr_30)   stw     30,-8(11)
++_GLOBAL(_savegpr_31)   stw     31,-4(11)
++                       blr
++
++/* Routines for restoring integer registers, called by the compiler.  */
++/* Called with r11 pointing to the stack header word of the caller of the */
++/* function, just beyond the end of the integer restore area.  */
++
++_GLOBAL(_restgpr_14)   lwz     14,-72(11)      /* restore gp registers */
++_GLOBAL(_restgpr_15)   lwz     15,-68(11)
++_GLOBAL(_restgpr_16)   lwz     16,-64(11)
++_GLOBAL(_restgpr_17)   lwz     17,-60(11)
++_GLOBAL(_restgpr_18)   lwz     18,-56(11)
++_GLOBAL(_restgpr_19)   lwz     19,-52(11)
++_GLOBAL(_restgpr_20)   lwz     20,-48(11)
++_GLOBAL(_restgpr_21)   lwz     21,-44(11)
++_GLOBAL(_restgpr_22)   lwz     22,-40(11)
++_GLOBAL(_restgpr_23)   lwz     23,-36(11)
++_GLOBAL(_restgpr_24)   lwz     24,-32(11)
++_GLOBAL(_restgpr_25)   lwz     25,-28(11)
++_GLOBAL(_restgpr_26)   lwz     26,-24(11)
++_GLOBAL(_restgpr_27)   lwz     27,-20(11)
++_GLOBAL(_restgpr_28)   lwz     28,-16(11)
++_GLOBAL(_restgpr_29)   lwz     29,-12(11)
++_GLOBAL(_restgpr_30)   lwz     30,-8(11)
++_GLOBAL(_restgpr_31)   lwz     31,-4(11)
++                       blr
++
++/* Routines for restoring integer registers, called by the compiler.  */
++/* Called with r11 pointing to the stack header word of the caller of the */
++/* function, just beyond the end of the integer restore area.  */
++
++_GLOBAL(_restgpr_14_x) lwz     14,-72(11)      /* restore gp registers */
++_GLOBAL(_restgpr_15_x) lwz     15,-68(11)
++_GLOBAL(_restgpr_16_x) lwz     16,-64(11)
++_GLOBAL(_restgpr_17_x) lwz     17,-60(11)
++_GLOBAL(_restgpr_18_x) lwz     18,-56(11)
++_GLOBAL(_restgpr_19_x) lwz     19,-52(11)
++_GLOBAL(_restgpr_20_x) lwz     20,-48(11)
++_GLOBAL(_restgpr_21_x) lwz     21,-44(11)
++_GLOBAL(_restgpr_22_x) lwz     22,-40(11)
++_GLOBAL(_restgpr_23_x) lwz     23,-36(11)
++_GLOBAL(_restgpr_24_x) lwz     24,-32(11)
++_GLOBAL(_restgpr_25_x) lwz     25,-28(11)
++_GLOBAL(_restgpr_26_x) lwz     26,-24(11)
++_GLOBAL(_restgpr_27_x) lwz     27,-20(11)
++_GLOBAL(_restgpr_28_x) lwz     28,-16(11)
++_GLOBAL(_restgpr_29_x) lwz     29,-12(11)
++_GLOBAL(_restgpr_30_x) lwz     30,-8(11)
++_GLOBAL(_restgpr_31_x) lwz     0,4(11)
++                       lwz     31,-4(11)
++                       mtlr    0
++                       mr      1,11
++                       blr
++#endif
+--- a/arch/powerpc/kernel/ppc_ksyms.c
++++ b/arch/powerpc/kernel/ppc_ksyms.c
+@@ -185,3 +185,114 @@ EXPORT_SYMBOL(__mtdcr);
+ EXPORT_SYMBOL(__mfdcr);
+ #endif
+ EXPORT_SYMBOL(empty_zero_page);
++
++#if defined(CONFIG_PPC32) && defined(CONFIG_CC_OPTIMIZE_FOR_SIZE)
++void _savegpr_14(void);
++void _savegpr_15(void);
++void _savegpr_16(void);
++void _savegpr_17(void);
++void _savegpr_18(void);
++void _savegpr_19(void);
++void _savegpr_20(void);
++void _savegpr_21(void);
++void _savegpr_22(void);
++void _savegpr_23(void);
++void _savegpr_24(void);
++void _savegpr_25(void);
++void _savegpr_26(void);
++void _savegpr_27(void);
++void _savegpr_28(void);
++void _savegpr_29(void);
++void _savegpr_30(void);
++void _savegpr_31(void);
++void _restgpr_14(void);
++void _restgpr_15(void);
++void _restgpr_16(void);
++void _restgpr_17(void);
++void _restgpr_18(void);
++void _restgpr_19(void);
++void _restgpr_20(void);
++void _restgpr_21(void);
++void _restgpr_22(void);
++void _restgpr_23(void);
++void _restgpr_24(void);
++void _restgpr_25(void);
++void _restgpr_26(void);
++void _restgpr_27(void);
++void _restgpr_28(void);
++void _restgpr_29(void);
++void _restgpr_30(void);
++void _restgpr_31(void);
++void _restgpr_14_x(void);
++void _restgpr_15_x(void);
++void _restgpr_16_x(void);
++void _restgpr_17_x(void);
++void _restgpr_18_x(void);
++void _restgpr_19_x(void);
++void _restgpr_20_x(void);
++void _restgpr_21_x(void);
++void _restgpr_22_x(void);
++void _restgpr_23_x(void);
++void _restgpr_24_x(void);
++void _restgpr_25_x(void);
++void _restgpr_26_x(void);
++void _restgpr_27_x(void);
++void _restgpr_28_x(void);
++void _restgpr_29_x(void);
++void _restgpr_30_x(void);
++void _restgpr_31_x(void);
++EXPORT_SYMBOL(_savegpr_14);
++EXPORT_SYMBOL(_savegpr_15);
++EXPORT_SYMBOL(_savegpr_16);
++EXPORT_SYMBOL(_savegpr_17);
++EXPORT_SYMBOL(_savegpr_18);
++EXPORT_SYMBOL(_savegpr_19);
++EXPORT_SYMBOL(_savegpr_20);
++EXPORT_SYMBOL(_savegpr_21);
++EXPORT_SYMBOL(_savegpr_22);
++EXPORT_SYMBOL(_savegpr_23);
++EXPORT_SYMBOL(_savegpr_24);
++EXPORT_SYMBOL(_savegpr_25);
++EXPORT_SYMBOL(_savegpr_26);
++EXPORT_SYMBOL(_savegpr_27);
++EXPORT_SYMBOL(_savegpr_28);
++EXPORT_SYMBOL(_savegpr_29);
++EXPORT_SYMBOL(_savegpr_30);
++EXPORT_SYMBOL(_savegpr_31);
++EXPORT_SYMBOL(_restgpr_14);
++EXPORT_SYMBOL(_restgpr_15);
++EXPORT_SYMBOL(_restgpr_16);
++EXPORT_SYMBOL(_restgpr_17);
++EXPORT_SYMBOL(_restgpr_18);
++EXPORT_SYMBOL(_restgpr_19);
++EXPORT_SYMBOL(_restgpr_20);
++EXPORT_SYMBOL(_restgpr_21);
++EXPORT_SYMBOL(_restgpr_22);
++EXPORT_SYMBOL(_restgpr_23);
++EXPORT_SYMBOL(_restgpr_24);
++EXPORT_SYMBOL(_restgpr_25);
++EXPORT_SYMBOL(_restgpr_26);
++EXPORT_SYMBOL(_restgpr_27);
++EXPORT_SYMBOL(_restgpr_28);
++EXPORT_SYMBOL(_restgpr_29);
++EXPORT_SYMBOL(_restgpr_30);
++EXPORT_SYMBOL(_restgpr_31);
++EXPORT_SYMBOL(_restgpr_14_x);
++EXPORT_SYMBOL(_restgpr_15_x);
++EXPORT_SYMBOL(_restgpr_16_x);
++EXPORT_SYMBOL(_restgpr_17_x);
++EXPORT_SYMBOL(_restgpr_18_x);
++EXPORT_SYMBOL(_restgpr_19_x);
++EXPORT_SYMBOL(_restgpr_20_x);
++EXPORT_SYMBOL(_restgpr_21_x);
++EXPORT_SYMBOL(_restgpr_22_x);
++EXPORT_SYMBOL(_restgpr_23_x);
++EXPORT_SYMBOL(_restgpr_24_x);
++EXPORT_SYMBOL(_restgpr_25_x);
++EXPORT_SYMBOL(_restgpr_26_x);
++EXPORT_SYMBOL(_restgpr_27_x);
++EXPORT_SYMBOL(_restgpr_28_x);
++EXPORT_SYMBOL(_restgpr_29_x);
++EXPORT_SYMBOL(_restgpr_30_x);
++EXPORT_SYMBOL(_restgpr_31_x);
++#endif /* CONFIG_PPC32 && CONFIG_CC_OPTIMIZE_FOR_SIZE */
diff --git a/target/linux/generic/patches-2.6.33/055-lzma_arm_kernel.patch b/target/linux/generic/patches-2.6.33/055-lzma_arm_kernel.patch
new file mode 100644
index 0000000000..59c31e7f33
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/055-lzma_arm_kernel.patch
@@ -0,0 +1,57 @@
+From d0f226a0f104c7d1da1d215b8013359273e39e18 Mon Sep 17 00:00:00 2001
+From: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+Date: Fri, 16 Oct 2009 16:17:22 +0200
+Subject: [PATCH] Add LZMA decompression on ARM
+
+
+Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+---
+ arch/arm/Kconfig                      |    1 +
+ arch/arm/boot/compressed/Makefile     |    1 +
+ arch/arm/boot/compressed/misc.c       |    4 ++++
+ arch/arm/boot/compressed/piggy.lzma.S |    6 ++++++
+ 4 files changed, 12 insertions(+), 0 deletions(-)
+ create mode 100644 arch/arm/boot/compressed/piggy.lzma.S
+
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -20,6 +20,7 @@ config ARM
+ 	select HAVE_GENERIC_DMA_COHERENT
+ 	select HAVE_KERNEL_GZIP
+ 	select HAVE_KERNEL_LZO
++	select HAVE_KERNEL_LZMA
+ 	help
+ 	  The ARM series is a line of low-power-consumption RISC chip designs
+ 	  licensed by ARM Ltd and targeted at embedded applications and
+--- a/arch/arm/boot/compressed/Makefile
++++ b/arch/arm/boot/compressed/Makefile
+@@ -65,6 +65,7 @@ SEDFLAGS	= s/TEXT_START/$(ZTEXTADDR)/;s/
+ 
+ suffix_$(CONFIG_KERNEL_GZIP) = gzip
+ suffix_$(CONFIG_KERNEL_LZO)  = lzo
++suffix_$(CONFIG_KERNEL_LZMA)  = lzma
+ 
+ targets       := vmlinux vmlinux.lds \
+ 		 piggy.$(suffix_y) piggy.$(suffix_y).o \
+--- a/arch/arm/boot/compressed/misc.c
++++ b/arch/arm/boot/compressed/misc.c
+@@ -248,6 +248,10 @@ static unsigned long free_mem_end_ptr;
+ #include "../../../../lib/decompress_inflate.c"
+ #endif
+ 
++#ifdef CONFIG_KERNEL_LZMA
++#include "../../../../lib/decompress_unlzma.c"
++#endif
++
+ #ifdef CONFIG_KERNEL_LZO
+ #include "../../../../lib/decompress_unlzo.c"
+ #endif
+--- /dev/null
++++ b/arch/arm/boot/compressed/piggy.lzma.S
+@@ -0,0 +1,6 @@
++	.section .piggydata,#alloc
++	.globl	input_data
++input_data:
++	.incbin	"arch/arm/boot/compressed/piggy.lzma"
++	.globl	input_data_end
++input_data_end:
diff --git a/target/linux/generic/patches-2.6.33/060-block2mtd_init.patch b/target/linux/generic/patches-2.6.33/060-block2mtd_init.patch
new file mode 100644
index 0000000000..8feec96a19
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/060-block2mtd_init.patch
@@ -0,0 +1,120 @@
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -14,6 +14,7 @@
+ #include <linux/list.h>
+ #include <linux/init.h>
+ #include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
+ #include <linux/buffer_head.h>
+ #include <linux/mutex.h>
+ #include <linux/mount.h>
+@@ -232,10 +233,11 @@ static void block2mtd_free_device(struct
+ 
+ 
+ /* FIXME: ensure that mtd->size % erase_size == 0 */
+-static struct block2mtd_dev *add_device(char *devname, int erase_size)
++static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname)
+ {
+ 	struct block_device *bdev;
+ 	struct block2mtd_dev *dev;
++	struct mtd_partition *part;
+ 	char *name;
+ 
+ 	if (!devname)
+@@ -273,17 +275,17 @@ static struct block2mtd_dev *add_device(
+ 
+ 	mutex_init(&dev->write_mutex);
+ 
+-	/* Setup the MTD structure */
+-	/* make the name contain the block device in */
+-	name = kmalloc(sizeof("block2mtd: ") + strlen(devname) + 1,
+-			GFP_KERNEL);
++	if (!mtdname)
++		mtdname = devname;
++
++	name = kmalloc(strlen(mtdname) + 1, GFP_KERNEL);
+ 	if (!name)
+ 		goto devinit_err;
+ 
+-	sprintf(name, "block2mtd: %s", devname);
++	strcpy(name, mtdname);
+ 	dev->mtd.name = name;
+ 
+-	dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK;
++	dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK & ~(erase_size - 1);
+ 	dev->mtd.erasesize = erase_size;
+ 	dev->mtd.writesize = 1;
+ 	dev->mtd.type = MTD_RAM;
+@@ -296,14 +298,17 @@ static struct block2mtd_dev *add_device(
+ 	dev->mtd.priv = dev;
+ 	dev->mtd.owner = THIS_MODULE;
+ 
+-	if (add_mtd_device(&dev->mtd)) {
++	part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
++	part->name = dev->mtd.name;
++	part->offset = 0;
++	part->size = dev->mtd.size;
++	if (add_mtd_partitions(&dev->mtd, part, 1)) {
+ 		/* Device didnt get added, so free the entry */
+ 		goto devinit_err;
+ 	}
+ 	list_add(&dev->list, &blkmtd_device_list);
+ 	INFO("mtd%d: [%s] erase_size = %dKiB [%d]", dev->mtd.index,
+-			dev->mtd.name + strlen("block2mtd: "),
+-			dev->mtd.erasesize >> 10, dev->mtd.erasesize);
++			mtdname, dev->mtd.erasesize >> 10, dev->mtd.erasesize);
+ 	return dev;
+ 
+ devinit_err:
+@@ -376,9 +381,9 @@ static char block2mtd_paramline[80 + 12]
+ 
+ static int block2mtd_setup2(const char *val)
+ {
+-	char buf[80 + 12]; /* 80 for device, 12 for erase size */
++	char buf[80 + 12 + 80]; /* 80 for device, 12 for erase size, 80 for name */
+ 	char *str = buf;
+-	char *token[2];
++	char *token[3];
+ 	char *name;
+ 	size_t erase_size = PAGE_SIZE;
+ 	int i, ret;
+@@ -389,7 +394,7 @@ static int block2mtd_setup2(const char *
+ 	strcpy(str, val);
+ 	kill_final_newline(str);
+ 
+-	for (i = 0; i < 2; i++)
++	for (i = 0; i < 3; i++)
+ 		token[i] = strsep(&str, ",");
+ 
+ 	if (str)
+@@ -408,8 +413,10 @@ static int block2mtd_setup2(const char *
+ 			parse_err("illegal erase size");
+ 		}
+ 	}
++	if (token[2] && (strlen(token[2]) + 1 > 80))
++		parse_err("mtd device name too long");
+ 
+-	add_device(name, erase_size);
++	add_device(name, erase_size, token[2]);
+ 
+ 	return 0;
+ }
+@@ -443,7 +450,7 @@ static int block2mtd_setup(const char *v
+ 
+ 
+ module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);
+-MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>]\"");
++MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>]]\"");
+ 
+ static int __init block2mtd_init(void)
+ {
+--- a/fs/partitions/check.c
++++ b/fs/partitions/check.c
+@@ -637,6 +637,7 @@ try_scan:
+ 	kfree(state);
+ 	return 0;
+ }
++EXPORT_SYMBOL(rescan_partitions);
+ 
+ unsigned char *read_dev_sector(struct block_device *bdev, sector_t n, Sector *p)
+ {
diff --git a/target/linux/generic/patches-2.6.33/065-rootfs_split.patch b/target/linux/generic/patches-2.6.33/065-rootfs_split.patch
new file mode 100644
index 0000000000..22b3f5e900
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/065-rootfs_split.patch
@@ -0,0 +1,625 @@
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -53,6 +53,16 @@ config MTD_PARTITIONS
+ 	  devices. Partitioning on NFTL 'devices' is a different - that's the
+ 	  'normal' form of partitioning used on a block device.
+ 
++config MTD_ROOTFS_ROOT_DEV
++	bool "Automatically set 'rootfs' partition to be root filesystem"
++	depends on MTD_PARTITIONS
++	default y
++
++config MTD_ROOTFS_SPLIT
++	bool "Automatically split 'rootfs' partition for squashfs"
++	depends on MTD_PARTITIONS
++	default y
++
+ config MTD_REDBOOT_PARTS
+ 	tristate "RedBoot partition table parsing"
+ 	depends on MTD_PARTITIONS
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -18,6 +18,8 @@
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+ #include <linux/mtd/compatmac.h>
++#include <linux/root_dev.h>
++#include <linux/magic.h>
+ 
+ /* Our partition linked list */
+ static LIST_HEAD(mtd_partitions);
+@@ -35,7 +37,7 @@ struct mtd_part {
+  * the pointer to that structure with this macro.
+  */
+ #define PART(x)  ((struct mtd_part *)(x))
+-
++#define IS_PART(mtd) (mtd->read == part_read)
+ 
+ /*
+  * MTD methods which simply translate the effective address and pass through
+@@ -503,6 +505,150 @@ out_register:
+ 	return slave;
+ }
+ 
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++#define ROOTFS_SPLIT_NAME "rootfs_data"
++#define ROOTFS_REMOVED_NAME "<removed>"
++
++struct squashfs_super_block {
++	__le32 s_magic;
++	__le32 pad0[9];
++	__le64 bytes_used;
++};
++
++
++static int split_squashfs(struct mtd_info *master, int offset, int *split_offset)
++{
++	struct squashfs_super_block sb;
++	int len, ret;
++
++	ret = master->read(master, offset, sizeof(sb), &len, (void *) &sb);
++	if (ret || (len != sizeof(sb))) {
++		printk(KERN_ALERT "split_squashfs: error occured while reading "
++			"from \"%s\"\n", master->name);
++		return -EINVAL;
++	}
++
++	if (SQUASHFS_MAGIC != le32_to_cpu(sb.s_magic) ) {
++		printk(KERN_ALERT "split_squashfs: no squashfs found in \"%s\"\n",
++			master->name);
++		*split_offset = 0;
++		return 0;
++	}
++
++	if (le64_to_cpu((sb.bytes_used)) <= 0) {
++		printk(KERN_ALERT "split_squashfs: squashfs is empty in \"%s\"\n",
++			master->name);
++		*split_offset = 0;
++		return 0;
++	}
++
++	len = (u32) le64_to_cpu(sb.bytes_used);
++	len += (offset & 0x000fffff);
++	len +=  (master->erasesize - 1);
++	len &= ~(master->erasesize - 1);
++	len -= (offset & 0x000fffff);
++	*split_offset = offset + len;
++
++	return 0;
++}
++
++static int split_rootfs_data(struct mtd_info *master, struct mtd_info *rpart, const struct mtd_partition *part)
++{
++	struct mtd_partition *dpart;
++	struct mtd_part *slave = NULL;
++	int split_offset = 0;
++	int ret;
++
++	ret = split_squashfs(master, part->offset, &split_offset);
++	if (ret)
++		return ret;
++
++	if (split_offset <= 0)
++		return 0;
++
++	dpart = kmalloc(sizeof(*part)+sizeof(ROOTFS_SPLIT_NAME)+1, GFP_KERNEL);
++	if (dpart == NULL) {
++		printk(KERN_INFO "split_squashfs: no memory for partition \"%s\"\n",
++			ROOTFS_SPLIT_NAME);
++		return -ENOMEM;
++	}
++
++	memcpy(dpart, part, sizeof(*part));
++	dpart->name = (unsigned char *)&dpart[1];
++	strcpy(dpart->name, ROOTFS_SPLIT_NAME);
++
++	dpart->size -= split_offset - dpart->offset;
++	dpart->offset = split_offset;
++
++	if (dpart == NULL)
++		return 1;
++
++	printk(KERN_INFO "mtd: partition \"%s\" created automatically, ofs=%llX, len=%llX \n",
++		ROOTFS_SPLIT_NAME, dpart->offset, dpart->size);
++
++	slave = add_one_partition(master, dpart, 0, split_offset);
++	if (!slave) {
++		kfree(dpart);
++		return -ENOMEM;
++	}
++	rpart->split = &slave->mtd;
++
++	return 0;
++}
++
++static int refresh_rootfs_split(struct mtd_info *mtd)
++{
++	struct mtd_partition tpart;
++	struct mtd_part *part;
++	char *name;
++	//int index = 0;
++	int offset, size;
++	int ret;
++
++	part = PART(mtd);
++
++	/* check for the new squashfs offset first */
++	ret = split_squashfs(part->master, part->offset, &offset);
++	if (ret)
++		return ret;
++
++	if ((offset > 0) && !mtd->split) {
++		printk(KERN_INFO "%s: creating new split partition for \"%s\"\n", __func__, mtd->name);
++		/* if we don't have a rootfs split partition, create a new one */
++		tpart.name = (char *) mtd->name;
++		tpart.size = mtd->size;
++		tpart.offset = part->offset;
++
++		return split_rootfs_data(part->master, &part->mtd, &tpart);
++	} else if ((offset > 0) && mtd->split) {
++		/* update the offsets of the existing partition */
++		size = mtd->size + part->offset - offset;
++
++		part = PART(mtd->split);
++		part->offset = offset;
++		part->mtd.size = size;
++		printk(KERN_INFO "%s: %s partition \"" ROOTFS_SPLIT_NAME "\", offset: 0x%06x (0x%06x)\n",
++			__func__, (!strcmp(part->mtd.name, ROOTFS_SPLIT_NAME) ? "updating" : "creating"),
++			(u32) part->offset, (u32) part->mtd.size);
++		name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
++		strcpy(name, ROOTFS_SPLIT_NAME);
++		part->mtd.name = name;
++	} else if ((offset <= 0) && mtd->split) {
++		printk(KERN_INFO "%s: removing partition \"%s\"\n", __func__, mtd->split->name);
++
++		/* mark existing partition as removed */
++		part = PART(mtd->split);
++		name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
++		strcpy(name, ROOTFS_REMOVED_NAME);
++		part->mtd.name = name;
++		part->offset = 0;
++		part->mtd.size = 0;
++	}
++
++	return 0;
++}
++#endif /* CONFIG_MTD_ROOTFS_SPLIT */
++
+ /*
+  * This function, given a master MTD object and a partition table, creates
+  * and registers slave MTD objects which are bound to the master according to
+@@ -518,7 +664,7 @@ int add_mtd_partitions(struct mtd_info *
+ {
+ 	struct mtd_part *slave;
+ 	uint64_t cur_offset = 0;
+-	int i;
++	int i, ret;
+ 
+ 	printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
+ 
+@@ -526,6 +672,21 @@ int add_mtd_partitions(struct mtd_info *
+ 		slave = add_one_partition(master, parts + i, i, cur_offset);
+ 		if (!slave)
+ 			return -ENOMEM;
++
++		if (!strcmp(parts[i].name, "rootfs")) {
++#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
++			if (ROOT_DEV == 0) {
++				printk(KERN_NOTICE "mtd: partition \"rootfs\" "
++					"set to be root filesystem\n");
++				ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, slave->mtd.index);
++			}
++#endif
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++			ret = split_rootfs_data(master, &slave->mtd, &parts[i]);
++			/* if (ret == 0)
++				j++; */
++#endif
++		}
+ 		cur_offset = slave->offset + slave->mtd.size;
+ 	}
+ 
+@@ -533,6 +694,32 @@ int add_mtd_partitions(struct mtd_info *
+ }
+ EXPORT_SYMBOL(add_mtd_partitions);
+ 
++int refresh_mtd_partitions(struct mtd_info *mtd)
++{
++	int ret = 0;
++
++	if (IS_PART(mtd)) {
++		struct mtd_part *part;
++		struct mtd_info *master;
++
++		part = PART(mtd);
++		master = part->master;
++		if (master->refresh_device)
++			ret = master->refresh_device(master);
++	}
++
++	if (!ret && mtd->refresh_device)
++		ret = mtd->refresh_device(mtd);
++
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++	if (!ret && IS_PART(mtd) && !strcmp(mtd->name, "rootfs"))
++		refresh_rootfs_split(mtd);
++#endif
++
++	return 0;
++}
++EXPORT_SYMBOL_GPL(refresh_mtd_partitions);
++
+ static DEFINE_SPINLOCK(part_parser_lock);
+ static LIST_HEAD(part_parsers);
+ 
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -29,6 +29,8 @@ struct block2mtd_dev {
+ 	struct block_device *blkdev;
+ 	struct mtd_info mtd;
+ 	struct mutex write_mutex;
++	rwlock_t bdev_mutex;
++	char devname[0];
+ };
+ 
+ 
+@@ -81,6 +83,12 @@ static int block2mtd_erase(struct mtd_in
+ 	size_t len = instr->len;
+ 	int err;
+ 
++	read_lock(&dev->bdev_mutex);
++	if (!dev->blkdev) {
++		err = -EINVAL;
++		goto done;
++	}
++
+ 	instr->state = MTD_ERASING;
+ 	mutex_lock(&dev->write_mutex);
+ 	err = _block2mtd_erase(dev, from, len);
+@@ -93,6 +101,10 @@ static int block2mtd_erase(struct mtd_in
+ 
+ 	instr->state = MTD_ERASE_DONE;
+ 	mtd_erase_callback(instr);
++
++done:
++	read_unlock(&dev->bdev_mutex);
++
+ 	return err;
+ }
+ 
+@@ -104,10 +116,14 @@ static int block2mtd_read(struct mtd_inf
+ 	struct page *page;
+ 	int index = from >> PAGE_SHIFT;
+ 	int offset = from & (PAGE_SIZE-1);
+-	int cpylen;
++	int cpylen, err = 0;
++
++	read_lock(&dev->bdev_mutex);
++	if (!dev->blkdev || (from > mtd->size)) {
++		err = -EINVAL;
++		goto done;
++	}
+ 
+-	if (from > mtd->size)
+-		return -EINVAL;
+ 	if (from + len > mtd->size)
+ 		len = mtd->size - from;
+ 
+@@ -122,10 +138,14 @@ static int block2mtd_read(struct mtd_inf
+ 		len = len - cpylen;
+ 
+ 		page = page_read(dev->blkdev->bd_inode->i_mapping, index);
+-		if (!page)
+-			return -ENOMEM;
+-		if (IS_ERR(page))
+-			return PTR_ERR(page);
++		if (!page) {
++			err = -ENOMEM;
++			goto done;
++		}
++		if (IS_ERR(page)) {
++			err = PTR_ERR(page);
++			goto done;
++		}
+ 
+ 		memcpy(buf, page_address(page) + offset, cpylen);
+ 		page_cache_release(page);
+@@ -136,7 +156,10 @@ static int block2mtd_read(struct mtd_inf
+ 		offset = 0;
+ 		index++;
+ 	}
+-	return 0;
++
++done:
++	read_unlock(&dev->bdev_mutex);
++	return err;
+ }
+ 
+ 
+@@ -188,12 +211,22 @@ static int block2mtd_write(struct mtd_in
+ 		size_t *retlen, const u_char *buf)
+ {
+ 	struct block2mtd_dev *dev = mtd->priv;
+-	int err;
++	int err = 0;
++
++	read_lock(&dev->bdev_mutex);
++	if (!dev->blkdev) {
++		err = -EINVAL;
++		goto done;
++	}
+ 
+ 	if (!len)
+-		return 0;
+-	if (to >= mtd->size)
+-		return -ENOSPC;
++		goto done;
++
++	if (to >= mtd->size) {
++		err = -ENOSPC;
++		goto done;
++	}
++
+ 	if (to + len > mtd->size)
+ 		len = mtd->size - to;
+ 
+@@ -202,6 +235,9 @@ static int block2mtd_write(struct mtd_in
+ 	mutex_unlock(&dev->write_mutex);
+ 	if (err > 0)
+ 		err = 0;
++
++done:
++	read_unlock(&dev->bdev_mutex);
+ 	return err;
+ }
+ 
+@@ -210,52 +246,29 @@ static int block2mtd_write(struct mtd_in
+ static void block2mtd_sync(struct mtd_info *mtd)
+ {
+ 	struct block2mtd_dev *dev = mtd->priv;
+-	sync_blockdev(dev->blkdev);
+-	return;
+-}
+-
+-
+-static void block2mtd_free_device(struct block2mtd_dev *dev)
+-{
+-	if (!dev)
+-		return;
+-
+-	kfree(dev->mtd.name);
+ 
+-	if (dev->blkdev) {
+-		invalidate_mapping_pages(dev->blkdev->bd_inode->i_mapping,
+-					0, -1);
+-		close_bdev_exclusive(dev->blkdev, FMODE_READ|FMODE_WRITE);
+-	}
++	read_lock(&dev->bdev_mutex);
++	if (dev->blkdev)
++		sync_blockdev(dev->blkdev);
++	read_unlock(&dev->bdev_mutex);
+ 
+-	kfree(dev);
++	return;
+ }
+ 
+ 
+-/* FIXME: ensure that mtd->size % erase_size == 0 */
+-static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname)
++static int _open_bdev(struct block2mtd_dev *dev)
+ {
+ 	struct block_device *bdev;
+-	struct block2mtd_dev *dev;
+-	struct mtd_partition *part;
+-	char *name;
+-
+-	if (!devname)
+-		return NULL;
+-
+-	dev = kzalloc(sizeof(struct block2mtd_dev), GFP_KERNEL);
+-	if (!dev)
+-		return NULL;
+ 
+ 	/* Get a handle on the device */
+-	bdev = open_bdev_exclusive(devname, FMODE_READ|FMODE_WRITE, NULL);
++	bdev = open_bdev_exclusive(dev->devname, FMODE_READ|FMODE_WRITE, NULL);
+ #ifndef MODULE
+ 	if (IS_ERR(bdev)) {
+ 
+ 		/* We might not have rootfs mounted at this point. Try
+ 		   to resolve the device name by other means. */
+ 
+-		dev_t devt = name_to_dev_t(devname);
++		dev_t devt = name_to_dev_t(dev->devname);
+ 		if (devt) {
+ 			bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);
+ 		}
+@@ -263,17 +276,98 @@ static struct block2mtd_dev *add_device(
+ #endif
+ 
+ 	if (IS_ERR(bdev)) {
+-		ERROR("error: cannot open device %s", devname);
+-		goto devinit_err;
++		ERROR("error: cannot open device %s", dev->devname);
++		return 1;
+ 	}
+ 	dev->blkdev = bdev;
+ 
+ 	if (MAJOR(bdev->bd_dev) == MTD_BLOCK_MAJOR) {
+ 		ERROR("attempting to use an MTD device as a block device");
+-		goto devinit_err;
++		return 1;
+ 	}
+ 
++	return 0;
++}
++
++static void _close_bdev(struct block2mtd_dev *dev)
++{
++	struct block_device *bdev;
++
++	if (!dev->blkdev)
++		return;
++
++	bdev = dev->blkdev;
++	invalidate_mapping_pages(dev->blkdev->bd_inode->i_mapping, 0, -1);
++	close_bdev_exclusive(dev->blkdev, FMODE_READ|FMODE_WRITE);
++	dev->blkdev = NULL;
++}
++
++static void block2mtd_free_device(struct block2mtd_dev *dev)
++{
++	if (!dev)
++		return;
++
++	kfree(dev->mtd.name);
++	_close_bdev(dev);
++	kfree(dev);
++}
++
++
++static int block2mtd_refresh(struct mtd_info *mtd)
++{
++	struct block2mtd_dev *dev = mtd->priv;
++	struct block_device *bdev;
++	dev_t devt;
++	int err = 0;
++
++	/* no other mtd function can run at this point */
++	write_lock(&dev->bdev_mutex);
++
++	/* get the device number for the whole disk */
++	devt = MKDEV(MAJOR(dev->blkdev->bd_dev), 0);
++
++	/* close the old block device */
++	_close_bdev(dev);
++
++	/* open the whole disk, issue a partition rescan, then */
++	bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);
++	if (!bdev || !bdev->bd_disk)
++		err = -EINVAL;
++#ifndef CONFIG_MTD_BLOCK2MTD_MODULE
++	else
++		err = rescan_partitions(bdev->bd_disk, bdev);
++#endif
++	if (bdev)
++		close_bdev_exclusive(bdev, FMODE_READ|FMODE_WRITE);
++
++	/* try to open the partition block device again */
++	_open_bdev(dev);
++	write_unlock(&dev->bdev_mutex);
++
++	return err;
++}
++
++/* FIXME: ensure that mtd->size % erase_size == 0 */
++static struct block2mtd_dev *add_device(char *devname, int erase_size, char *mtdname)
++{
++	struct block2mtd_dev *dev;
++	struct mtd_partition *part;
++	char *name;
++
++	if (!devname)
++		return NULL;
++
++	dev = kzalloc(sizeof(struct block2mtd_dev) + strlen(devname) + 1, GFP_KERNEL);
++	if (!dev)
++		return NULL;
++
++	strcpy(dev->devname, devname);
++
++	if (_open_bdev(dev))
++		goto devinit_err;
++
+ 	mutex_init(&dev->write_mutex);
++	rwlock_init(&dev->bdev_mutex);
+ 
+ 	if (!mtdname)
+ 		mtdname = devname;
+@@ -297,6 +391,7 @@ static struct block2mtd_dev *add_device(
+ 	dev->mtd.read = block2mtd_read;
+ 	dev->mtd.priv = dev;
+ 	dev->mtd.owner = THIS_MODULE;
++	dev->mtd.refresh_device = block2mtd_refresh;
+ 
+ 	part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
+ 	part->name = dev->mtd.name;
+--- a/drivers/mtd/mtdchar.c
++++ b/drivers/mtd/mtdchar.c
+@@ -18,6 +18,7 @@
+ 
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/compatmac.h>
++#include <linux/mtd/partitions.h>
+ 
+ #include <asm/uaccess.h>
+ 
+@@ -814,6 +815,13 @@ static int mtd_ioctl(struct inode *inode
+ 		file->f_pos = 0;
+ 		break;
+ 	}
++#ifdef CONFIG_MTD_PARTITIONS
++	case MTDREFRESH:
++	{
++		ret = refresh_mtd_partitions(mtd);
++		break;
++	}
++#endif
+ 
+ 	default:
+ 		ret = -ENOTTY;
+--- a/include/linux/mtd/mtd.h
++++ b/include/linux/mtd/mtd.h
+@@ -101,6 +101,7 @@ struct mtd_oob_ops {
+ 	uint8_t		*oobbuf;
+ };
+ 
++struct mtd_info;
+ struct mtd_info {
+ 	u_char type;
+ 	uint32_t flags;
+@@ -241,6 +242,9 @@ struct mtd_info {
+ 	struct device dev;
+ 	int usecount;
+ 
++	int (*refresh_device)(struct mtd_info *mtd);
++	struct mtd_info *split;
++
+ 	/* If the driver is something smart, like UBI, it may need to maintain
+ 	 * its own reference counting. The below functions are only for driver.
+ 	 * The driver may register its callbacks. These callbacks are not
+--- a/include/linux/mtd/partitions.h
++++ b/include/linux/mtd/partitions.h
+@@ -34,12 +34,14 @@
+  * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK).
+  */
+ 
++struct mtd_partition;
+ struct mtd_partition {
+ 	char *name;			/* identifier string */
+ 	uint64_t size;			/* partition size */
+ 	uint64_t offset;		/* offset within the master MTD space */
+ 	uint32_t mask_flags;		/* master MTD flags to mask out for this partition */
+ 	struct nand_ecclayout *ecclayout;	/* out of band layout for this partition (NAND only)*/
++	int (*refresh_partition)(struct mtd_info *);
+ };
+ 
+ #define MTDPART_OFS_NXTBLK	(-2)
+@@ -51,6 +53,7 @@ struct mtd_info;
+ 
+ int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
+ int del_mtd_partitions(struct mtd_info *);
++int refresh_mtd_partitions(struct mtd_info *);
+ 
+ /*
+  * Functions dealing with the various ways of partitioning the space
+--- a/include/mtd/mtd-abi.h
++++ b/include/mtd/mtd-abi.h
+@@ -110,6 +110,7 @@ struct otp_info {
+ #define MEMERASE64		_IOW('M', 20, struct erase_info_user64)
+ #define MEMWRITEOOB64		_IOWR('M', 21, struct mtd_oob_buf64)
+ #define MEMREADOOB64		_IOWR('M', 22, struct mtd_oob_buf64)
++#define MTDREFRESH		_IO('M', 23)
+ 
+ /*
+  * Obsolete legacy interface. Keep it in order not to break userspace
diff --git a/target/linux/generic/patches-2.6.33/066-block2mtd_probe.patch b/target/linux/generic/patches-2.6.33/066-block2mtd_probe.patch
new file mode 100644
index 0000000000..b2b1a347f4
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/066-block2mtd_probe.patch
@@ -0,0 +1,10 @@
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -268,6 +268,7 @@ static int _open_bdev(struct block2mtd_d
+ 		/* We might not have rootfs mounted at this point. Try
+ 		   to resolve the device name by other means. */
+ 
++		wait_for_device_probe();
+ 		dev_t devt = name_to_dev_t(dev->devname);
+ 		if (devt) {
+ 			bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);
diff --git a/target/linux/generic/patches-2.6.33/070-redboot_space.patch b/target/linux/generic/patches-2.6.33/070-redboot_space.patch
new file mode 100644
index 0000000000..6ace83c01a
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/070-redboot_space.patch
@@ -0,0 +1,30 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -249,14 +249,21 @@ static int parse_redboot_partitions(stru
+ #endif
+ 		names += strlen(names)+1;
+ 
+-#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+ 		if(fl->next && fl->img->flash_base + fl->img->size + master->erasesize <= fl->next->img->flash_base) {
+-			i++;
+-			parts[i].offset = parts[i-1].size + parts[i-1].offset;
+-			parts[i].size = fl->next->img->flash_base - parts[i].offset;
+-			parts[i].name = nullname;
+-		}
++			if (!strcmp(parts[i].name, "rootfs")) {
++				parts[i].size = fl->next->img->flash_base;
++				parts[i].size &= ~(master->erasesize - 1);
++				parts[i].size -= parts[i].offset;
++#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
++				nrparts--;
++			} else {
++				i++;
++				parts[i].offset = parts[i-1].size + parts[i-1].offset;
++				parts[i].size = fl->next->img->flash_base - parts[i].offset;
++				parts[i].name = nullname;
+ #endif
++			}
++		}
+ 		tmp_fl = fl;
+ 		fl = fl->next;
+ 		kfree(tmp_fl);
diff --git a/target/linux/generic/patches-2.6.33/071-redboot_boardconfig.patch b/target/linux/generic/patches-2.6.33/071-redboot_boardconfig.patch
new file mode 100644
index 0000000000..f9bc4fe36b
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/071-redboot_boardconfig.patch
@@ -0,0 +1,60 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -11,6 +11,8 @@
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+ 
++#define BOARD_CONFIG_PART		"boardconfig"
++
+ struct fis_image_desc {
+     unsigned char name[16];      // Null terminated name
+     uint32_t	  flash_base;    // Address within FLASH of image
+@@ -41,6 +43,7 @@ static int parse_redboot_partitions(stru
+                              struct mtd_partition **pparts,
+                              unsigned long fis_origin)
+ {
++	unsigned long max_offset = 0;
+ 	int nrparts = 0;
+ 	struct fis_image_desc *buf;
+ 	struct mtd_partition *parts;
+@@ -209,14 +212,14 @@ static int parse_redboot_partitions(stru
+ 		}
+ 	}
+ #endif
+-	parts = kzalloc(sizeof(*parts)*nrparts + nulllen + namelen, GFP_KERNEL);
++	parts = kzalloc(sizeof(*parts) * (nrparts + 1) + nulllen + namelen + sizeof(BOARD_CONFIG_PART), GFP_KERNEL);
+ 
+ 	if (!parts) {
+ 		ret = -ENOMEM;
+ 		goto out;
+ 	}
+ 
+-	nullname = (char *)&parts[nrparts];
++	nullname = (char *)&parts[nrparts + 1];
+ #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+ 	if (nulllen > 0) {
+ 		strcpy(nullname, nullstring);
+@@ -235,6 +238,8 @@ static int parse_redboot_partitions(stru
+ 	}
+ #endif
+ 	for ( ; i<nrparts; i++) {
++		if(max_offset < buf[i].flash_base + buf[i].size)
++			max_offset = buf[i].flash_base + buf[i].size;
+ 		parts[i].size = fl->img->size;
+ 		parts[i].offset = fl->img->flash_base;
+ 		parts[i].name = names;
+@@ -268,6 +273,14 @@ static int parse_redboot_partitions(stru
+ 		fl = fl->next;
+ 		kfree(tmp_fl);
+ 	}
++	if(master->size - max_offset >= master->erasesize)
++	{
++		parts[nrparts].size = master->size - max_offset;
++		parts[nrparts].offset = max_offset;
++		parts[nrparts].name = names;
++		strcpy(names, BOARD_CONFIG_PART);
++		nrparts++;
++	}
+ 	ret = nrparts;
+ 	*pparts = parts;
+  out:
diff --git a/target/linux/generic/patches-2.6.33/080-mtd_plat_nand_chip_fixup.patch b/target/linux/generic/patches-2.6.33/080-mtd_plat_nand_chip_fixup.patch
new file mode 100644
index 0000000000..16ce76ce8c
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/080-mtd_plat_nand_chip_fixup.patch
@@ -0,0 +1,32 @@
+--- a/include/linux/mtd/nand.h
++++ b/include/linux/mtd/nand.h
+@@ -491,6 +491,7 @@ struct platform_nand_chip {
+ 	int			chip_delay;
+ 	unsigned int		options;
+ 	const char		**part_probe_types;
++	int			(*chip_fixup)(struct mtd_info *mtd);
+ 	void			(*set_parts)(uint64_t size,
+ 					struct platform_nand_chip *chip);
+ 	void			*priv;
+--- a/drivers/mtd/nand/plat_nand.c
++++ b/drivers/mtd/nand/plat_nand.c
+@@ -91,7 +91,18 @@ static int __devinit plat_nand_probe(str
+ 	}
+ 
+ 	/* Scan to find existance of the device */
+-	if (nand_scan(&data->mtd, 1)) {
++	if (nand_scan_ident(&data->mtd, 1)) {
++		res = -ENXIO;
++		goto out;
++	}
++
++	if (pdata->chip.chip_fixup) {
++		res = pdata->chip.chip_fixup(&data->mtd);
++		if (res)
++			goto out;
++	}
++
++	if (nand_scan_tail(&data->mtd)) {
+ 		err = -ENXIO;
+ 		goto out;
+ 	}
diff --git a/target/linux/generic/patches-2.6.33/081-mtd_myloader_partition_parser.patch b/target/linux/generic/patches-2.6.33/081-mtd_myloader_partition_parser.patch
new file mode 100644
index 0000000000..61b822ee88
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/081-mtd_myloader_partition_parser.patch
@@ -0,0 +1,35 @@
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -181,6 +181,22 @@ config MTD_AR7_PARTS
+ 	---help---
+ 	  TI AR7 partitioning support
+ 
++config MTD_MYLOADER_PARTS
++	tristate "MyLoader partition parsing"
++	depends on MTD_PARTITIONS && (ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX)
++	---help---
++	  MyLoader is a bootloader which allows the user to define partitions
++	  in flash devices, by putting a table in the second erase block
++	  on the device, similar to a partition table. This table gives the 
++	  offsets and lengths of the user defined partitions.
++
++	  If you need code which can detect and parse these tables, and
++	  register MTD 'partitions' corresponding to each image detected,
++	  enable this option.
++
++	  You will still need the parsing functions to be called by the driver
++	  for your particular device. It won't happen automatically.
++
+ comment "User Modules And Translation Layers"
+ 
+ config MTD_CHAR
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdli
+ obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
+ obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
+ obj-$(CONFIG_MTD_OF_PARTS)      += ofpart.o
++obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+ 
+ # 'Users' - code which presents functionality to userspace.
+ obj-$(CONFIG_MTD_CHAR)		+= mtdchar.o
diff --git a/target/linux/generic/patches-2.6.33/082-mtd_info_move_forward_decl.patch b/target/linux/generic/patches-2.6.33/082-mtd_info_move_forward_decl.patch
new file mode 100644
index 0000000000..13f0a217d4
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/082-mtd_info_move_forward_decl.patch
@@ -0,0 +1,18 @@
+--- a/include/linux/mtd/partitions.h
++++ b/include/linux/mtd/partitions.h
+@@ -33,6 +33,7 @@
+  * Note: writeable partitions require their size and offset be
+  * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK).
+  */
++struct mtd_info;
+ 
+ struct mtd_partition;
+ struct mtd_partition {
+@@ -49,7 +50,6 @@ struct mtd_partition {
+ #define MTDPART_SIZ_FULL	(0)
+ 
+ 
+-struct mtd_info;
+ 
+ int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
+ int del_mtd_partitions(struct mtd_info *);
diff --git a/target/linux/generic/patches-2.6.33/083-mtd_fix_nand_correct_data_return_code.patch b/target/linux/generic/patches-2.6.33/083-mtd_fix_nand_correct_data_return_code.patch
new file mode 100644
index 0000000000..f630059e87
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/083-mtd_fix_nand_correct_data_return_code.patch
@@ -0,0 +1,12 @@
+--- a/drivers/mtd/nand/nand_ecc.c
++++ b/drivers/mtd/nand/nand_ecc.c
+@@ -507,8 +507,7 @@ int __nand_correct_data(unsigned char *b
+ 	if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1)
+ 		return 1;	/* error in ecc data; no action needed */
+ 
+-	printk(KERN_ERR "uncorrectable error : ");
+-	return -1;
++	return -EBADMSG;
+ }
+ EXPORT_SYMBOL(__nand_correct_data);
+ 
diff --git a/target/linux/generic/patches-2.6.33/084-mtd_m25p80_add_pm25lv_flash_support.patch b/target/linux/generic/patches-2.6.33/084-mtd_m25p80_add_pm25lv_flash_support.patch
new file mode 100644
index 0000000000..54cc6bbe50
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/084-mtd_m25p80_add_pm25lv_flash_support.patch
@@ -0,0 +1,13 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -645,6 +645,10 @@ static const struct spi_device_id m25p_i
+ 	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
+ 	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
+ 
++	/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
++	{ "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K) },
++	{ "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K) },
++
+ 	/* Spansion -- single (large) sector size only, at least
+ 	 * for the chips listed here (without boot sectors).
+ 	 */
diff --git a/target/linux/generic/patches-2.6.33/085-mtd_m25p80_add_en25pxx_support.patch b/target/linux/generic/patches-2.6.33/085-mtd_m25p80_add_en25pxx_support.patch
new file mode 100644
index 0000000000..607430bb2d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/085-mtd_m25p80_add_en25pxx_support.patch
@@ -0,0 +1,13 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -645,6 +645,10 @@ static const struct spi_device_id m25p_i
+ 	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
+ 	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
+ 
++	/* EON -- en25pxx */
++	{ "en25p32", INFO(0x1c2016, 0, 64 * 1024,  64, 0) },
++	{ "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
++
+ 	/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
+ 	{ "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K) },
+ 	{ "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K) },
diff --git a/target/linux/generic/patches-2.6.33/086-mtd_m25p80_add_xxxs33b_support.patch b/target/linux/generic/patches-2.6.33/086-mtd_m25p80_add_xxxs33b_support.patch
new file mode 100644
index 0000000000..2f6d89927c
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/086-mtd_m25p80_add_xxxs33b_support.patch
@@ -0,0 +1,28 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -649,6 +649,11 @@ static const struct spi_device_id m25p_i
+ 	{ "en25p32", INFO(0x1c2016, 0, 64 * 1024,  64, 0) },
+ 	{ "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
+ 
++	/* Numonyx -- xxxs33b */
++	{ "160s33b",  INFO(0x898911, 0, 64 * 1024,  64, 0) },
++	{ "320s33b",  INFO(0x898912, 0, 64 * 1024, 128, 0) },
++	{ "640s33b",  INFO(0x898913, 0, 64 * 1024, 256, 0) },
++
+ 	/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
+ 	{ "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K) },
+ 	{ "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K) },
+@@ -833,11 +838,12 @@ static int __devinit m25p_probe(struct s
+ 	dev_set_drvdata(&spi->dev, flash);
+ 
+ 	/*
+-	 * Atmel and SST serial flash tend to power
++	 * Atmel, SST and Intel/Numonyx serial flash tend to power
+ 	 * up with the software protection bits set
+ 	 */
+ 
+ 	if (info->jedec_id >> 16 == 0x1f ||
++	    info->jedec_id >> 16 == 0x89 ||
+ 	    info->jedec_id >> 16 == 0xbf) {
+ 		write_enable(flash);
+ 		write_sr(flash, 0);
diff --git a/target/linux/generic/patches-2.6.33/087-mtd-m25p80-add-w25q32-chip-support.patch b/target/linux/generic/patches-2.6.33/087-mtd-m25p80-add-w25q32-chip-support.patch
new file mode 100644
index 0000000000..8d32ec2c5e
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/087-mtd-m25p80-add-w25q32-chip-support.patch
@@ -0,0 +1,10 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -706,6 +706,7 @@ static const struct spi_device_id m25p_i
+ 	{ "w25x80", INFO(0xef3014, 0, 64 * 1024,  16, SECT_4K) },
+ 	{ "w25x16", INFO(0xef3015, 0, 64 * 1024,  32, SECT_4K) },
+ 	{ "w25x32", INFO(0xef3016, 0, 64 * 1024,  64, SECT_4K) },
++	{ "w25q32", INFO(0xef4016, 0, 64 * 1024,  64, SECT_4K) },
+ 	{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
+ 
+ 	/* Catalyst / On Semiconductor -- non-JEDEC */
diff --git a/target/linux/generic/patches-2.6.33/088-winbond_cmdset.patch b/target/linux/generic/patches-2.6.33/088-winbond_cmdset.patch
new file mode 100644
index 0000000000..d5889ce62d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/088-winbond_cmdset.patch
@@ -0,0 +1,10 @@
+--- a/drivers/mtd/chips/gen_probe.c
++++ b/drivers/mtd/chips/gen_probe.c
+@@ -249,6 +249,7 @@ static struct mtd_info *check_cmd_set(st
+ #endif
+ #ifdef CONFIG_MTD_CFI_AMDSTD
+ 	case 0x0002:
++	case 0x0006:
+ 		return cfi_cmdset_0002(map, primary);
+ #endif
+ #ifdef CONFIG_MTD_CFI_STAA
diff --git a/target/linux/generic/patches-2.6.33/089-mtd-samsung-flash.patch b/target/linux/generic/patches-2.6.33/089-mtd-samsung-flash.patch
new file mode 100644
index 0000000000..46923358b3
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/089-mtd-samsung-flash.patch
@@ -0,0 +1,37 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -327,9 +327,32 @@ static void cfi_fixup_major_minor(struct
+ {
+ 	// manufacturers defined in include/linux/mtd/cfi.h
+ 
+-	if (cfi->mfr == CFI_MFR_SAMSUNG && cfi->id == 0x257e &&
+-	    extp->MajorVersion == '0')
++	if (cfi->mfr == CFI_MFR_SAMSUNG &&
++	    extp->MajorVersion == '0') {
++		printk("  Fixed Samsung's Amd/Fujitsu Extended Query version from %c.%c",
++		       extp->MajorVersion, extp->MinorVersion);
++
+ 		extp->MajorVersion = '1';
++		extp->MinorVersion = '0';
++
++		printk(" to %c.%c.\n",
++		       extp->MajorVersion, extp->MinorVersion);
++	}
++
++	if (cfi->mfr == CFI_MFR_SAMSUNG &&
++	    extp->MajorVersion == '3' && extp->MinorVersion == '3') {
++		printk(KERN_NOTICE "  Newer Samsung flash detected, "
++		       "should be compatibile with Amd/Fujitsu.\n");
++
++		printk("  Fixed Samsung's Amd/Fujitsu Extended Query version from %c.%c",
++		       extp->MajorVersion, extp->MinorVersion);
++
++		extp->MajorVersion = '1';	// set to 1.3 (last defined version)
++		extp->MinorVersion = '3';
++
++		printk(" to %c.%c.\n",
++		       extp->MajorVersion, extp->MinorVersion);
++	}
+ }
+ 
+ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)
diff --git a/target/linux/generic/patches-2.6.33/100-netfilter_layer7_2.21.patch b/target/linux/generic/patches-2.6.33/100-netfilter_layer7_2.21.patch
new file mode 100644
index 0000000000..be7d97fe12
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/100-netfilter_layer7_2.21.patch
@@ -0,0 +1,2132 @@
+--- /dev/null
++++ b/include/linux/netfilter/xt_layer7.h
+@@ -0,0 +1,13 @@
++#ifndef _XT_LAYER7_H
++#define _XT_LAYER7_H
++
++#define MAX_PATTERN_LEN 8192
++#define MAX_PROTOCOL_LEN 256
++
++struct xt_layer7_info {
++    char protocol[MAX_PROTOCOL_LEN];
++    char pattern[MAX_PATTERN_LEN];
++    u_int8_t invert;
++};
++
++#endif /* _XT_LAYER7_H */
+--- a/include/net/netfilter/nf_conntrack.h
++++ b/include/net/netfilter/nf_conntrack.h
+@@ -116,6 +116,22 @@ struct nf_conn {
+ 	u_int32_t secmark;
+ #endif
+ 
++#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || \
++    defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++	struct {
++		/*
++		 * e.g. "http". NULL before decision. "unknown" after decision
++		 * if no match.
++		 */
++		char *app_proto;
++		/*
++		 * application layer data so far. NULL after match decision.
++		 */
++		char *app_data;
++		unsigned int app_data_len;
++	} layer7;
++#endif
++
+ 	/* Storage reserved for other modules: */
+ 	union nf_conntrack_proto proto;
+ 
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -858,6 +858,27 @@ config NETFILTER_XT_MATCH_STATE
+ 
+ 	  To compile it as a module, choose M here.  If unsure, say N.
+ 
++config NETFILTER_XT_MATCH_LAYER7
++	tristate '"layer7" match support'
++	depends on NETFILTER_XTABLES
++	depends on EXPERIMENTAL && (IP_NF_CONNTRACK || NF_CONNTRACK)
++       depends on NF_CT_ACCT
++	help
++	  Say Y if you want to be able to classify connections (and their
++	  packets) based on regular expression matching of their application
++	  layer data.   This is one way to classify applications such as
++	  peer-to-peer filesharing systems that do not always use the same
++	  port.
++
++	  To compile it as a module, choose M here.  If unsure, say N.
++
++config NETFILTER_XT_MATCH_LAYER7_DEBUG
++        bool 'Layer 7 debugging output'
++        depends on NETFILTER_XT_MATCH_LAYER7
++        help
++          Say Y to get lots of debugging output.
++
++
+ config NETFILTER_XT_MATCH_STATISTIC
+ 	tristate '"statistic" match support'
+ 	depends on NETFILTER_ADVANCED
+--- a/net/netfilter/Makefile
++++ b/net/netfilter/Makefile
+@@ -89,6 +89,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_RECENT) 
+ obj-$(CONFIG_NETFILTER_XT_MATCH_SCTP) += xt_sctp.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_SOCKET) += xt_socket.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STATE) += xt_state.o
++obj-$(CONFIG_NETFILTER_XT_MATCH_LAYER7) += xt_layer7.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STATISTIC) += xt_statistic.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STRING) += xt_string.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_TCPMSS) += xt_tcpmss.o
+--- a/net/netfilter/nf_conntrack_core.c
++++ b/net/netfilter/nf_conntrack_core.c
+@@ -201,6 +201,14 @@ destroy_conntrack(struct nf_conntrack *n
+ 	 * too. */
+ 	nf_ct_remove_expectations(ct);
+ 
++	#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++	if(ct->layer7.app_proto)
++		kfree(ct->layer7.app_proto);
++	if(ct->layer7.app_data)
++	kfree(ct->layer7.app_data);
++	#endif
++
++
+ 	/* We overload first tuple to link into unconfirmed list. */
+ 	if (!nf_ct_is_confirmed(ct)) {
+ 		BUG_ON(hlist_nulls_unhashed(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode));
+--- a/net/netfilter/nf_conntrack_standalone.c
++++ b/net/netfilter/nf_conntrack_standalone.c
+@@ -171,6 +171,12 @@ static int ct_seq_show(struct seq_file *
+ 		goto release;
+ #endif
+ 
++#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++	if(ct->layer7.app_proto &&
++           seq_printf(s, "l7proto=%s ", ct->layer7.app_proto))
++		return -ENOSPC;
++#endif
++
+ 	if (seq_printf(s, "use=%u\n", atomic_read(&ct->ct_general.use)))
+ 		goto release;
+ 
+--- /dev/null
++++ b/net/netfilter/regexp/regexp.c
+@@ -0,0 +1,1197 @@
++/*
++ * regcomp and regexec -- regsub and regerror are elsewhere
++ * @(#)regexp.c	1.3 of 18 April 87
++ *
++ *	Copyright (c) 1986 by University of Toronto.
++ *	Written by Henry Spencer.  Not derived from licensed software.
++ *
++ *	Permission is granted to anyone to use this software for any
++ *	purpose on any computer system, and to redistribute it freely,
++ *	subject to the following restrictions:
++ *
++ *	1. The author is not responsible for the consequences of use of
++ *		this software, no matter how awful, even if they arise
++ *		from defects in it.
++ *
++ *	2. The origin of this software must not be misrepresented, either
++ *		by explicit claim or by omission.
++ *
++ *	3. Altered versions must be plainly marked as such, and must not
++ *		be misrepresented as being the original software.
++ *
++ * Beware that some of this code is subtly aware of the way operator
++ * precedence is structured in regular expressions.  Serious changes in
++ * regular-expression syntax might require a total rethink.
++ *
++ * This code was modified by Ethan Sommer to work within the kernel
++ * (it now uses kmalloc etc..)
++ *
++ * Modified slightly by Matthew Strait to use more modern C.
++ */
++
++#include "regexp.h"
++#include "regmagic.h"
++
++/* added by ethan and matt.  Lets it work in both kernel and user space.
++(So iptables can use it, for instance.)  Yea, it goes both ways... */
++#if __KERNEL__
++  #define malloc(foo) kmalloc(foo,GFP_ATOMIC)
++#else
++  #define printk(format,args...) printf(format,##args)
++#endif
++
++void regerror(char * s)
++{
++        printk("<3>Regexp: %s\n", s);
++        /* NOTREACHED */
++}
++
++/*
++ * The "internal use only" fields in regexp.h are present to pass info from
++ * compile to execute that permits the execute phase to run lots faster on
++ * simple cases.  They are:
++ *
++ * regstart	char that must begin a match; '\0' if none obvious
++ * reganch	is the match anchored (at beginning-of-line only)?
++ * regmust	string (pointer into program) that match must include, or NULL
++ * regmlen	length of regmust string
++ *
++ * Regstart and reganch permit very fast decisions on suitable starting points
++ * for a match, cutting down the work a lot.  Regmust permits fast rejection
++ * of lines that cannot possibly match.  The regmust tests are costly enough
++ * that regcomp() supplies a regmust only if the r.e. contains something
++ * potentially expensive (at present, the only such thing detected is * or +
++ * at the start of the r.e., which can involve a lot of backup).  Regmlen is
++ * supplied because the test in regexec() needs it and regcomp() is computing
++ * it anyway.
++ */
++
++/*
++ * Structure for regexp "program".  This is essentially a linear encoding
++ * of a nondeterministic finite-state machine (aka syntax charts or
++ * "railroad normal form" in parsing technology).  Each node is an opcode
++ * plus a "next" pointer, possibly plus an operand.  "Next" pointers of
++ * all nodes except BRANCH implement concatenation; a "next" pointer with
++ * a BRANCH on both ends of it is connecting two alternatives.  (Here we
++ * have one of the subtle syntax dependencies:  an individual BRANCH (as
++ * opposed to a collection of them) is never concatenated with anything
++ * because of operator precedence.)  The operand of some types of node is
++ * a literal string; for others, it is a node leading into a sub-FSM.  In
++ * particular, the operand of a BRANCH node is the first node of the branch.
++ * (NB this is *not* a tree structure:  the tail of the branch connects
++ * to the thing following the set of BRANCHes.)  The opcodes are:
++ */
++
++/* definition	number	opnd?	meaning */
++#define	END	0	/* no	End of program. */
++#define	BOL	1	/* no	Match "" at beginning of line. */
++#define	EOL	2	/* no	Match "" at end of line. */
++#define	ANY	3	/* no	Match any one character. */
++#define	ANYOF	4	/* str	Match any character in this string. */
++#define	ANYBUT	5	/* str	Match any character not in this string. */
++#define	BRANCH	6	/* node	Match this alternative, or the next... */
++#define	BACK	7	/* no	Match "", "next" ptr points backward. */
++#define	EXACTLY	8	/* str	Match this string. */
++#define	NOTHING	9	/* no	Match empty string. */
++#define	STAR	10	/* node	Match this (simple) thing 0 or more times. */
++#define	PLUS	11	/* node	Match this (simple) thing 1 or more times. */
++#define	OPEN	20	/* no	Mark this point in input as start of #n. */
++			/*	OPEN+1 is number 1, etc. */
++#define	CLOSE	30	/* no	Analogous to OPEN. */
++
++/*
++ * Opcode notes:
++ *
++ * BRANCH	The set of branches constituting a single choice are hooked
++ *		together with their "next" pointers, since precedence prevents
++ *		anything being concatenated to any individual branch.  The
++ *		"next" pointer of the last BRANCH in a choice points to the
++ *		thing following the whole choice.  This is also where the
++ *		final "next" pointer of each individual branch points; each
++ *		branch starts with the operand node of a BRANCH node.
++ *
++ * BACK		Normal "next" pointers all implicitly point forward; BACK
++ *		exists to make loop structures possible.
++ *
++ * STAR,PLUS	'?', and complex '*' and '+', are implemented as circular
++ *		BRANCH structures using BACK.  Simple cases (one character
++ *		per match) are implemented with STAR and PLUS for speed
++ *		and to minimize recursive plunges.
++ *
++ * OPEN,CLOSE	...are numbered at compile time.
++ */
++
++/*
++ * A node is one char of opcode followed by two chars of "next" pointer.
++ * "Next" pointers are stored as two 8-bit pieces, high order first.  The
++ * value is a positive offset from the opcode of the node containing it.
++ * An operand, if any, simply follows the node.  (Note that much of the
++ * code generation knows about this implicit relationship.)
++ *
++ * Using two bytes for the "next" pointer is vast overkill for most things,
++ * but allows patterns to get big without disasters.
++ */
++#define	OP(p)	(*(p))
++#define	NEXT(p)	(((*((p)+1)&0377)<<8) + (*((p)+2)&0377))
++#define	OPERAND(p)	((p) + 3)
++
++/*
++ * See regmagic.h for one further detail of program structure.
++ */
++
++
++/*
++ * Utility definitions.
++ */
++#ifndef CHARBITS
++#define	UCHARAT(p)	((int)*(unsigned char *)(p))
++#else
++#define	UCHARAT(p)	((int)*(p)&CHARBITS)
++#endif
++
++#define	FAIL(m)	{ regerror(m); return(NULL); }
++#define	ISMULT(c)	((c) == '*' || (c) == '+' || (c) == '?')
++#define	META	"^$.[()|?+*\\"
++
++/*
++ * Flags to be passed up and down.
++ */
++#define	HASWIDTH	01	/* Known never to match null string. */
++#define	SIMPLE		02	/* Simple enough to be STAR/PLUS operand. */
++#define	SPSTART		04	/* Starts with * or +. */
++#define	WORST		0	/* Worst case. */
++
++/*
++ * Global work variables for regcomp().
++ */
++struct match_globals {
++char *reginput;		/* String-input pointer. */
++char *regbol;		/* Beginning of input, for ^ check. */
++char **regstartp;	/* Pointer to startp array. */
++char **regendp;		/* Ditto for endp. */
++char *regparse;		/* Input-scan pointer. */
++int regnpar;		/* () count. */
++char regdummy;
++char *regcode;		/* Code-emit pointer; &regdummy = don't. */
++long regsize;		/* Code size. */
++};
++
++/*
++ * Forward declarations for regcomp()'s friends.
++ */
++#ifndef STATIC
++#define	STATIC	static
++#endif
++STATIC char *reg(struct match_globals *g, int paren,int *flagp);
++STATIC char *regbranch(struct match_globals *g, int *flagp);
++STATIC char *regpiece(struct match_globals *g, int *flagp);
++STATIC char *regatom(struct match_globals *g, int *flagp);
++STATIC char *regnode(struct match_globals *g, char op);
++STATIC char *regnext(struct match_globals *g, char *p);
++STATIC void regc(struct match_globals *g, char b);
++STATIC void reginsert(struct match_globals *g, char op, char *opnd);
++STATIC void regtail(struct match_globals *g, char *p, char *val);
++STATIC void regoptail(struct match_globals *g, char *p, char *val);
++
++
++__kernel_size_t my_strcspn(const char *s1,const char *s2)
++{
++        char *scan1;
++        char *scan2;
++        int count;
++
++        count = 0;
++        for (scan1 = (char *)s1; *scan1 != '\0'; scan1++) {
++                for (scan2 = (char *)s2; *scan2 != '\0';)       /* ++ moved down. */
++                        if (*scan1 == *scan2++)
++                                return(count);
++                count++;
++        }
++        return(count);
++}
++
++/*
++ - regcomp - compile a regular expression into internal code
++ *
++ * We can't allocate space until we know how big the compiled form will be,
++ * but we can't compile it (and thus know how big it is) until we've got a
++ * place to put the code.  So we cheat:  we compile it twice, once with code
++ * generation turned off and size counting turned on, and once "for real".
++ * This also means that we don't allocate space until we are sure that the
++ * thing really will compile successfully, and we never have to move the
++ * code and thus invalidate pointers into it.  (Note that it has to be in
++ * one piece because free() must be able to free it all.)
++ *
++ * Beware that the optimization-preparation code in here knows about some
++ * of the structure of the compiled regexp.
++ */
++regexp *
++regcomp(char *exp,int *patternsize)
++{
++	register regexp *r;
++	register char *scan;
++	register char *longest;
++	register int len;
++	int flags;
++	struct match_globals g;
++	
++	/* commented out by ethan
++	   extern char *malloc();
++	*/
++
++	if (exp == NULL)
++		FAIL("NULL argument");
++
++	/* First pass: determine size, legality. */
++	g.regparse = exp;
++	g.regnpar = 1;
++	g.regsize = 0L;
++	g.regcode = &g.regdummy;
++	regc(&g, MAGIC);
++	if (reg(&g, 0, &flags) == NULL)
++		return(NULL);
++
++	/* Small enough for pointer-storage convention? */
++	if (g.regsize >= 32767L)		/* Probably could be 65535L. */
++		FAIL("regexp too big");
++
++	/* Allocate space. */
++	*patternsize=sizeof(regexp) + (unsigned)g.regsize;
++	r = (regexp *)malloc(sizeof(regexp) + (unsigned)g.regsize);
++	if (r == NULL)
++		FAIL("out of space");
++
++	/* Second pass: emit code. */
++	g.regparse = exp;
++	g.regnpar = 1;
++	g.regcode = r->program;
++	regc(&g, MAGIC);
++	if (reg(&g, 0, &flags) == NULL)
++		return(NULL);
++
++	/* Dig out information for optimizations. */
++	r->regstart = '\0';	/* Worst-case defaults. */
++	r->reganch = 0;
++	r->regmust = NULL;
++	r->regmlen = 0;
++	scan = r->program+1;			/* First BRANCH. */
++	if (OP(regnext(&g, scan)) == END) {		/* Only one top-level choice. */
++		scan = OPERAND(scan);
++
++		/* Starting-point info. */
++		if (OP(scan) == EXACTLY)
++			r->regstart = *OPERAND(scan);
++		else if (OP(scan) == BOL)
++			r->reganch++;
++
++		/*
++		 * If there's something expensive in the r.e., find the
++		 * longest literal string that must appear and make it the
++		 * regmust.  Resolve ties in favor of later strings, since
++		 * the regstart check works with the beginning of the r.e.
++		 * and avoiding duplication strengthens checking.  Not a
++		 * strong reason, but sufficient in the absence of others.
++		 */
++		if (flags&SPSTART) {
++			longest = NULL;
++			len = 0;
++			for (; scan != NULL; scan = regnext(&g, scan))
++				if (OP(scan) == EXACTLY && strlen(OPERAND(scan)) >= len) {
++					longest = OPERAND(scan);
++					len = strlen(OPERAND(scan));
++				}
++			r->regmust = longest;
++			r->regmlen = len;
++		}
++	}
++
++	return(r);
++}
++
++/*
++ - reg - regular expression, i.e. main body or parenthesized thing
++ *
++ * Caller must absorb opening parenthesis.
++ *
++ * Combining parenthesis handling with the base level of regular expression
++ * is a trifle forced, but the need to tie the tails of the branches to what
++ * follows makes it hard to avoid.
++ */
++static char *
++reg(struct match_globals *g, int paren, int *flagp /* Parenthesized? */ )
++{
++	register char *ret;
++	register char *br;
++	register char *ender;
++	register int parno = 0; /* 0 makes gcc happy */
++	int flags;
++
++	*flagp = HASWIDTH;	/* Tentatively. */
++
++	/* Make an OPEN node, if parenthesized. */
++	if (paren) {
++		if (g->regnpar >= NSUBEXP)
++			FAIL("too many ()");
++		parno = g->regnpar;
++		g->regnpar++;
++		ret = regnode(g, OPEN+parno);
++	} else
++		ret = NULL;
++
++	/* Pick up the branches, linking them together. */
++	br = regbranch(g, &flags);
++	if (br == NULL)
++		return(NULL);
++	if (ret != NULL)
++		regtail(g, ret, br);	/* OPEN -> first. */
++	else
++		ret = br;
++	if (!(flags&HASWIDTH))
++		*flagp &= ~HASWIDTH;
++	*flagp |= flags&SPSTART;
++	while (*g->regparse == '|') {
++		g->regparse++;
++		br = regbranch(g, &flags);
++		if (br == NULL)
++			return(NULL);
++		regtail(g, ret, br);	/* BRANCH -> BRANCH. */
++		if (!(flags&HASWIDTH))
++			*flagp &= ~HASWIDTH;
++		*flagp |= flags&SPSTART;
++	}
++
++	/* Make a closing node, and hook it on the end. */
++	ender = regnode(g, (paren) ? CLOSE+parno : END);	
++	regtail(g, ret, ender);
++
++	/* Hook the tails of the branches to the closing node. */
++	for (br = ret; br != NULL; br = regnext(g, br))
++		regoptail(g, br, ender);
++
++	/* Check for proper termination. */
++	if (paren && *g->regparse++ != ')') {
++		FAIL("unmatched ()");
++	} else if (!paren && *g->regparse != '\0') {
++		if (*g->regparse == ')') {
++			FAIL("unmatched ()");
++		} else
++			FAIL("junk on end");	/* "Can't happen". */
++		/* NOTREACHED */
++	}
++
++	return(ret);
++}
++
++/*
++ - regbranch - one alternative of an | operator
++ *
++ * Implements the concatenation operator.
++ */
++static char *
++regbranch(struct match_globals *g, int *flagp)
++{
++	register char *ret;
++	register char *chain;
++	register char *latest;
++	int flags;
++
++	*flagp = WORST;		/* Tentatively. */
++
++	ret = regnode(g, BRANCH);
++	chain = NULL;
++	while (*g->regparse != '\0' && *g->regparse != '|' && *g->regparse != ')') {
++		latest = regpiece(g, &flags);
++		if (latest == NULL)
++			return(NULL);
++		*flagp |= flags&HASWIDTH;
++		if (chain == NULL)	/* First piece. */
++			*flagp |= flags&SPSTART;
++		else
++			regtail(g, chain, latest);
++		chain = latest;
++	}
++	if (chain == NULL)	/* Loop ran zero times. */
++		(void) regnode(g, NOTHING);
++
++	return(ret);
++}
++
++/*
++ - regpiece - something followed by possible [*+?]
++ *
++ * Note that the branching code sequences used for ? and the general cases
++ * of * and + are somewhat optimized:  they use the same NOTHING node as
++ * both the endmarker for their branch list and the body of the last branch.
++ * It might seem that this node could be dispensed with entirely, but the
++ * endmarker role is not redundant.
++ */
++static char *
++regpiece(struct match_globals *g, int *flagp)
++{
++	register char *ret;
++	register char op;
++	register char *next;
++	int flags;
++
++	ret = regatom(g, &flags);
++	if (ret == NULL)
++		return(NULL);
++
++	op = *g->regparse;
++	if (!ISMULT(op)) {
++		*flagp = flags;
++		return(ret);
++	}
++
++	if (!(flags&HASWIDTH) && op != '?')
++		FAIL("*+ operand could be empty");
++	*flagp = (op != '+') ? (WORST|SPSTART) : (WORST|HASWIDTH);
++
++	if (op == '*' && (flags&SIMPLE))
++		reginsert(g, STAR, ret);
++	else if (op == '*') {
++		/* Emit x* as (x&|), where & means "self". */
++		reginsert(g, BRANCH, ret);			/* Either x */
++		regoptail(g, ret, regnode(g, BACK));		/* and loop */
++		regoptail(g, ret, ret);			/* back */
++		regtail(g, ret, regnode(g, BRANCH));		/* or */
++		regtail(g, ret, regnode(g, NOTHING));		/* null. */
++	} else if (op == '+' && (flags&SIMPLE))
++		reginsert(g, PLUS, ret);
++	else if (op == '+') {
++		/* Emit x+ as x(&|), where & means "self". */
++		next = regnode(g, BRANCH);			/* Either */
++		regtail(g, ret, next);
++		regtail(g, regnode(g, BACK), ret);		/* loop back */
++		regtail(g, next, regnode(g, BRANCH));		/* or */
++		regtail(g, ret, regnode(g, NOTHING));		/* null. */
++	} else if (op == '?') {
++		/* Emit x? as (x|) */
++		reginsert(g, BRANCH, ret);			/* Either x */
++		regtail(g, ret, regnode(g, BRANCH));		/* or */
++		next = regnode(g, NOTHING);		/* null. */
++		regtail(g, ret, next);
++		regoptail(g, ret, next);
++	}
++	g->regparse++;
++	if (ISMULT(*g->regparse))
++		FAIL("nested *?+");
++
++	return(ret);
++}
++
++/*
++ - regatom - the lowest level
++ *
++ * Optimization:  gobbles an entire sequence of ordinary characters so that
++ * it can turn them into a single node, which is smaller to store and
++ * faster to run.  Backslashed characters are exceptions, each becoming a
++ * separate node; the code is simpler that way and it's not worth fixing.
++ */
++static char *
++regatom(struct match_globals *g, int *flagp)
++{
++	register char *ret;
++	int flags;
++
++	*flagp = WORST;		/* Tentatively. */
++
++	switch (*g->regparse++) {
++	case '^':
++		ret = regnode(g, BOL);
++		break;
++	case '$':
++		ret = regnode(g, EOL);
++		break;
++	case '.':
++		ret = regnode(g, ANY);
++		*flagp |= HASWIDTH|SIMPLE;
++		break;
++	case '[': {
++			register int class;
++			register int classend;
++
++			if (*g->regparse == '^') {	/* Complement of range. */
++				ret = regnode(g, ANYBUT);
++				g->regparse++;
++			} else
++				ret = regnode(g, ANYOF);
++			if (*g->regparse == ']' || *g->regparse == '-')
++				regc(g, *g->regparse++);
++			while (*g->regparse != '\0' && *g->regparse != ']') {
++				if (*g->regparse == '-') {
++					g->regparse++;
++					if (*g->regparse == ']' || *g->regparse == '\0')
++						regc(g, '-');
++					else {
++						class = UCHARAT(g->regparse-2)+1;
++						classend = UCHARAT(g->regparse);
++						if (class > classend+1)
++							FAIL("invalid [] range");
++						for (; class <= classend; class++)
++							regc(g, class);
++						g->regparse++;
++					}
++				} else
++					regc(g, *g->regparse++);
++			}
++			regc(g, '\0');
++			if (*g->regparse != ']')
++				FAIL("unmatched []");
++			g->regparse++;
++			*flagp |= HASWIDTH|SIMPLE;
++		}
++		break;
++	case '(':
++		ret = reg(g, 1, &flags);
++		if (ret == NULL)
++			return(NULL);
++		*flagp |= flags&(HASWIDTH|SPSTART);
++		break;
++	case '\0':
++	case '|':
++	case ')':
++		FAIL("internal urp");	/* Supposed to be caught earlier. */
++		break;
++	case '?':
++	case '+':
++	case '*':
++		FAIL("?+* follows nothing");
++		break;
++	case '\\':
++		if (*g->regparse == '\0')
++			FAIL("trailing \\");
++		ret = regnode(g, EXACTLY);
++		regc(g, *g->regparse++);
++		regc(g, '\0');
++		*flagp |= HASWIDTH|SIMPLE;
++		break;
++	default: {
++			register int len;
++			register char ender;
++
++			g->regparse--;
++			len = my_strcspn((const char *)g->regparse, (const char *)META);
++			if (len <= 0)
++				FAIL("internal disaster");
++			ender = *(g->regparse+len);
++			if (len > 1 && ISMULT(ender))
++				len--;		/* Back off clear of ?+* operand. */
++			*flagp |= HASWIDTH;
++			if (len == 1)
++				*flagp |= SIMPLE;
++			ret = regnode(g, EXACTLY);
++			while (len > 0) {
++				regc(g, *g->regparse++);
++				len--;
++			}
++			regc(g, '\0');
++		}
++		break;
++	}
++
++	return(ret);
++}
++
++/*
++ - regnode - emit a node
++ */
++static char *			/* Location. */
++regnode(struct match_globals *g, char op)
++{
++	register char *ret;
++	register char *ptr;
++
++	ret = g->regcode;
++	if (ret == &g->regdummy) {
++		g->regsize += 3;
++		return(ret);
++	}
++
++	ptr = ret;
++	*ptr++ = op;
++	*ptr++ = '\0';		/* Null "next" pointer. */
++	*ptr++ = '\0';
++	g->regcode = ptr;
++
++	return(ret);
++}
++
++/*
++ - regc - emit (if appropriate) a byte of code
++ */
++static void
++regc(struct match_globals *g, char b)
++{
++	if (g->regcode != &g->regdummy)
++		*g->regcode++ = b;
++	else
++		g->regsize++;
++}
++
++/*
++ - reginsert - insert an operator in front of already-emitted operand
++ *
++ * Means relocating the operand.
++ */
++static void
++reginsert(struct match_globals *g, char op, char* opnd)
++{
++	register char *src;
++	register char *dst;
++	register char *place;
++
++	if (g->regcode == &g->regdummy) {
++		g->regsize += 3;
++		return;
++	}
++
++	src = g->regcode;
++	g->regcode += 3;
++	dst = g->regcode;
++	while (src > opnd)
++		*--dst = *--src;
++
++	place = opnd;		/* Op node, where operand used to be. */
++	*place++ = op;
++	*place++ = '\0';
++	*place++ = '\0';
++}
++
++/*
++ - regtail - set the next-pointer at the end of a node chain
++ */
++static void
++regtail(struct match_globals *g, char *p, char *val)
++{
++	register char *scan;
++	register char *temp;
++	register int offset;
++
++	if (p == &g->regdummy)
++		return;
++
++	/* Find last node. */
++	scan = p;
++	for (;;) {
++		temp = regnext(g, scan);
++		if (temp == NULL)
++			break;
++		scan = temp;
++	}
++
++	if (OP(scan) == BACK)
++		offset = scan - val;
++	else
++		offset = val - scan;
++	*(scan+1) = (offset>>8)&0377;
++	*(scan+2) = offset&0377;
++}
++
++/*
++ - regoptail - regtail on operand of first argument; nop if operandless
++ */
++static void
++regoptail(struct match_globals *g, char *p, char *val)
++{
++	/* "Operandless" and "op != BRANCH" are synonymous in practice. */
++	if (p == NULL || p == &g->regdummy || OP(p) != BRANCH)
++		return;
++	regtail(g, OPERAND(p), val);
++}
++
++/*
++ * regexec and friends
++ */
++
++
++/*
++ * Forwards.
++ */
++STATIC int regtry(struct match_globals *g, regexp *prog, char *string);
++STATIC int regmatch(struct match_globals *g, char *prog);
++STATIC int regrepeat(struct match_globals *g, char *p);
++
++#ifdef DEBUG
++int regnarrate = 0;
++void regdump();
++STATIC char *regprop(char *op);
++#endif
++
++/*
++ - regexec - match a regexp against a string
++ */
++int
++regexec(regexp *prog, char *string)
++{
++	register char *s;
++	struct match_globals g;
++
++	/* Be paranoid... */
++	if (prog == NULL || string == NULL) {
++		printk("<3>Regexp: NULL parameter\n");
++		return(0);
++	}
++
++	/* Check validity of program. */
++	if (UCHARAT(prog->program) != MAGIC) {
++		printk("<3>Regexp: corrupted program\n");
++		return(0);
++	}
++
++	/* If there is a "must appear" string, look for it. */
++	if (prog->regmust != NULL) {
++		s = string;
++		while ((s = strchr(s, prog->regmust[0])) != NULL) {
++			if (strncmp(s, prog->regmust, prog->regmlen) == 0)
++				break;	/* Found it. */
++			s++;
++		}
++		if (s == NULL)	/* Not present. */
++			return(0);
++	}
++
++	/* Mark beginning of line for ^ . */
++	g.regbol = string;
++
++	/* Simplest case:  anchored match need be tried only once. */
++	if (prog->reganch)
++		return(regtry(&g, prog, string));
++
++	/* Messy cases:  unanchored match. */
++	s = string;
++	if (prog->regstart != '\0')
++		/* We know what char it must start with. */
++		while ((s = strchr(s, prog->regstart)) != NULL) {
++			if (regtry(&g, prog, s))
++				return(1);
++			s++;
++		}
++	else
++		/* We don't -- general case. */
++		do {
++			if (regtry(&g, prog, s))
++				return(1);
++		} while (*s++ != '\0');
++
++	/* Failure. */
++	return(0);
++}
++
++/*
++ - regtry - try match at specific point
++ */
++static int			/* 0 failure, 1 success */
++regtry(struct match_globals *g, regexp *prog, char *string)
++{
++	register int i;
++	register char **sp;
++	register char **ep;
++
++	g->reginput = string;
++	g->regstartp = prog->startp;
++	g->regendp = prog->endp;
++
++	sp = prog->startp;
++	ep = prog->endp;
++	for (i = NSUBEXP; i > 0; i--) {
++		*sp++ = NULL;
++		*ep++ = NULL;
++	}
++	if (regmatch(g, prog->program + 1)) {
++		prog->startp[0] = string;
++		prog->endp[0] = g->reginput;
++		return(1);
++	} else
++		return(0);
++}
++
++/*
++ - regmatch - main matching routine
++ *
++ * Conceptually the strategy is simple:  check to see whether the current
++ * node matches, call self recursively to see whether the rest matches,
++ * and then act accordingly.  In practice we make some effort to avoid
++ * recursion, in particular by going through "ordinary" nodes (that don't
++ * need to know whether the rest of the match failed) by a loop instead of
++ * by recursion.
++ */
++static int			/* 0 failure, 1 success */
++regmatch(struct match_globals *g, char *prog)
++{
++	register char *scan = prog; /* Current node. */
++	char *next;		    /* Next node. */
++
++#ifdef DEBUG
++	if (scan != NULL && regnarrate)
++		fprintf(stderr, "%s(\n", regprop(scan));
++#endif
++	while (scan != NULL) {
++#ifdef DEBUG
++		if (regnarrate)
++			fprintf(stderr, "%s...\n", regprop(scan));
++#endif
++		next = regnext(g, scan);
++
++		switch (OP(scan)) {
++		case BOL:
++			if (g->reginput != g->regbol)
++				return(0);
++			break;
++		case EOL:
++			if (*g->reginput != '\0')
++				return(0);
++			break;
++		case ANY:
++			if (*g->reginput == '\0')
++				return(0);
++			g->reginput++;
++			break;
++		case EXACTLY: {
++				register int len;
++				register char *opnd;
++
++				opnd = OPERAND(scan);
++				/* Inline the first character, for speed. */
++				if (*opnd != *g->reginput)
++					return(0);
++				len = strlen(opnd);
++				if (len > 1 && strncmp(opnd, g->reginput, len) != 0)
++					return(0);
++				g->reginput += len;
++			}
++			break;
++		case ANYOF:
++			if (*g->reginput == '\0' || strchr(OPERAND(scan), *g->reginput) == NULL)
++				return(0);
++			g->reginput++;
++			break;
++		case ANYBUT:
++			if (*g->reginput == '\0' || strchr(OPERAND(scan), *g->reginput) != NULL)
++				return(0);
++			g->reginput++;
++			break;
++		case NOTHING:
++		case BACK:
++			break;
++		case OPEN+1:
++		case OPEN+2:
++		case OPEN+3:
++		case OPEN+4:
++		case OPEN+5:
++		case OPEN+6:
++		case OPEN+7:
++		case OPEN+8:
++		case OPEN+9: {
++				register int no;
++				register char *save;
++
++				no = OP(scan) - OPEN;
++				save = g->reginput;
++
++				if (regmatch(g, next)) {
++					/*
++					 * Don't set startp if some later
++					 * invocation of the same parentheses
++					 * already has.
++					 */
++					if (g->regstartp[no] == NULL)
++						g->regstartp[no] = save;
++					return(1);
++				} else
++					return(0);
++			}
++			break;
++		case CLOSE+1:
++		case CLOSE+2:
++		case CLOSE+3:
++		case CLOSE+4:
++		case CLOSE+5:
++		case CLOSE+6:
++		case CLOSE+7:
++		case CLOSE+8:
++		case CLOSE+9:
++			{
++				register int no;
++				register char *save;
++
++				no = OP(scan) - CLOSE;
++				save = g->reginput;
++
++				if (regmatch(g, next)) {
++					/*
++					 * Don't set endp if some later
++					 * invocation of the same parentheses
++					 * already has.
++					 */
++					if (g->regendp[no] == NULL)
++						g->regendp[no] = save;
++					return(1);
++				} else
++					return(0);
++			}
++			break;
++		case BRANCH: {
++				register char *save;
++
++				if (OP(next) != BRANCH)		/* No choice. */
++					next = OPERAND(scan);	/* Avoid recursion. */
++				else {
++					do {
++						save = g->reginput;
++						if (regmatch(g, OPERAND(scan)))
++							return(1);
++						g->reginput = save;
++						scan = regnext(g, scan);
++					} while (scan != NULL && OP(scan) == BRANCH);
++					return(0);
++					/* NOTREACHED */
++				}
++			}
++			break;
++		case STAR:
++		case PLUS: {
++				register char nextch;
++				register int no;
++				register char *save;
++				register int min;
++
++				/*
++				 * Lookahead to avoid useless match attempts
++				 * when we know what character comes next.
++				 */
++				nextch = '\0';
++				if (OP(next) == EXACTLY)
++					nextch = *OPERAND(next);
++				min = (OP(scan) == STAR) ? 0 : 1;
++				save = g->reginput;
++				no = regrepeat(g, OPERAND(scan));
++				while (no >= min) {
++					/* If it could work, try it. */
++					if (nextch == '\0' || *g->reginput == nextch)
++						if (regmatch(g, next))
++							return(1);
++					/* Couldn't or didn't -- back up. */
++					no--;
++					g->reginput = save + no;
++				}
++				return(0);
++			}
++			break;
++		case END:
++			return(1);	/* Success! */
++			break;
++		default:
++			printk("<3>Regexp: memory corruption\n");
++			return(0);
++			break;
++		}
++
++		scan = next;
++	}
++
++	/*
++	 * We get here only if there's trouble -- normally "case END" is
++	 * the terminating point.
++	 */
++	printk("<3>Regexp: corrupted pointers\n");
++	return(0);
++}
++
++/*
++ - regrepeat - repeatedly match something simple, report how many
++ */
++static int
++regrepeat(struct match_globals *g, char *p)
++{
++	register int count = 0;
++	register char *scan;
++	register char *opnd;
++
++	scan = g->reginput;
++	opnd = OPERAND(p);
++	switch (OP(p)) {
++	case ANY:
++		count = strlen(scan);
++		scan += count;
++		break;
++	case EXACTLY:
++		while (*opnd == *scan) {
++			count++;
++			scan++;
++		}
++		break;
++	case ANYOF:
++		while (*scan != '\0' && strchr(opnd, *scan) != NULL) {
++			count++;
++			scan++;
++		}
++		break;
++	case ANYBUT:
++		while (*scan != '\0' && strchr(opnd, *scan) == NULL) {
++			count++;
++			scan++;
++		}
++		break;
++	default:		/* Oh dear.  Called inappropriately. */
++		printk("<3>Regexp: internal foulup\n");
++		count = 0;	/* Best compromise. */
++		break;
++	}
++	g->reginput = scan;
++
++	return(count);
++}
++
++/*
++ - regnext - dig the "next" pointer out of a node
++ */
++static char*
++regnext(struct match_globals *g, char *p)
++{
++	register int offset;
++
++	if (p == &g->regdummy)
++		return(NULL);
++
++	offset = NEXT(p);
++	if (offset == 0)
++		return(NULL);
++
++	if (OP(p) == BACK)
++		return(p-offset);
++	else
++		return(p+offset);
++}
++
++#ifdef DEBUG
++
++STATIC char *regprop();
++
++/*
++ - regdump - dump a regexp onto stdout in vaguely comprehensible form
++ */
++void
++regdump(regexp *r)
++{
++	register char *s;
++	register char op = EXACTLY;	/* Arbitrary non-END op. */
++	register char *next;
++	/* extern char *strchr(); */
++
++
++	s = r->program + 1;
++	while (op != END) {	/* While that wasn't END last time... */
++		op = OP(s);
++		printf("%2d%s", s-r->program, regprop(s));	/* Where, what. */
++		next = regnext(s);
++		if (next == NULL)		/* Next ptr. */
++			printf("(0)");
++		else
++			printf("(%d)", (s-r->program)+(next-s));
++		s += 3;
++		if (op == ANYOF || op == ANYBUT || op == EXACTLY) {
++			/* Literal string, where present. */
++			while (*s != '\0') {
++				putchar(*s);
++				s++;
++			}
++			s++;
++		}
++		putchar('\n');
++	}
++
++	/* Header fields of interest. */
++	if (r->regstart != '\0')
++		printf("start `%c' ", r->regstart);
++	if (r->reganch)
++		printf("anchored ");
++	if (r->regmust != NULL)
++		printf("must have \"%s\"", r->regmust);
++	printf("\n");
++}
++
++/*
++ - regprop - printable representation of opcode
++ */
++static char *
++regprop(char *op)
++{
++#define BUFLEN 50
++	register char *p;
++	static char buf[BUFLEN];
++
++	strcpy(buf, ":");
++
++	switch (OP(op)) {
++	case BOL:
++		p = "BOL";
++		break;
++	case EOL:
++		p = "EOL";
++		break;
++	case ANY:
++		p = "ANY";
++		break;
++	case ANYOF:
++		p = "ANYOF";
++		break;
++	case ANYBUT:
++		p = "ANYBUT";
++		break;
++	case BRANCH:
++		p = "BRANCH";
++		break;
++	case EXACTLY:
++		p = "EXACTLY";
++		break;
++	case NOTHING:
++		p = "NOTHING";
++		break;
++	case BACK:
++		p = "BACK";
++		break;
++	case END:
++		p = "END";
++		break;
++	case OPEN+1:
++	case OPEN+2:
++	case OPEN+3:
++	case OPEN+4:
++	case OPEN+5:
++	case OPEN+6:
++	case OPEN+7:
++	case OPEN+8:
++	case OPEN+9:
++		snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "OPEN%d", OP(op)-OPEN);
++		p = NULL;
++		break;
++	case CLOSE+1:
++	case CLOSE+2:
++	case CLOSE+3:
++	case CLOSE+4:
++	case CLOSE+5:
++	case CLOSE+6:
++	case CLOSE+7:
++	case CLOSE+8:
++	case CLOSE+9:
++		snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "CLOSE%d", OP(op)-CLOSE);
++		p = NULL;
++		break;
++	case STAR:
++		p = "STAR";
++		break;
++	case PLUS:
++		p = "PLUS";
++		break;
++	default:
++		printk("<3>Regexp: corrupted opcode\n");
++		break;
++	}
++	if (p != NULL)
++		strncat(buf, p, BUFLEN-strlen(buf));
++	return(buf);
++}
++#endif
++
++
+--- /dev/null
++++ b/net/netfilter/regexp/regexp.h
+@@ -0,0 +1,41 @@
++/*
++ * Definitions etc. for regexp(3) routines.
++ *
++ * Caveat:  this is V8 regexp(3) [actually, a reimplementation thereof],
++ * not the System V one.
++ */
++
++#ifndef REGEXP_H
++#define REGEXP_H
++
++
++/*
++http://www.opensource.apple.com/darwinsource/10.3/expect-1/expect/expect.h ,
++which contains a version of this library, says:
++
++ *
++ * NSUBEXP must be at least 10, and no greater than 117 or the parser
++ * will not work properly.
++ *
++
++However, it looks rather like this library is limited to 10.  If you think
++otherwise, let us know.
++*/
++
++#define NSUBEXP  10
++typedef struct regexp {
++	char *startp[NSUBEXP];
++	char *endp[NSUBEXP];
++	char regstart;		/* Internal use only. */
++	char reganch;		/* Internal use only. */
++	char *regmust;		/* Internal use only. */
++	int regmlen;		/* Internal use only. */
++	char program[1];	/* Unwarranted chumminess with compiler. */
++} regexp;
++
++regexp * regcomp(char *exp, int *patternsize);
++int regexec(regexp *prog, char *string);
++void regsub(regexp *prog, char *source, char *dest);
++void regerror(char *s);
++
++#endif
+--- /dev/null
++++ b/net/netfilter/regexp/regmagic.h
+@@ -0,0 +1,5 @@
++/*
++ * The first byte of the regexp internal "program" is actually this magic
++ * number; the start node begins in the second byte.
++ */
++#define	MAGIC	0234
+--- /dev/null
++++ b/net/netfilter/regexp/regsub.c
+@@ -0,0 +1,95 @@
++/*
++ * regsub
++ * @(#)regsub.c	1.3 of 2 April 86
++ *
++ *	Copyright (c) 1986 by University of Toronto.
++ *	Written by Henry Spencer.  Not derived from licensed software.
++ *
++ *	Permission is granted to anyone to use this software for any
++ *	purpose on any computer system, and to redistribute it freely,
++ *	subject to the following restrictions:
++ *
++ *	1. The author is not responsible for the consequences of use of
++ *		this software, no matter how awful, even if they arise
++ *		from defects in it.
++ *
++ *	2. The origin of this software must not be misrepresented, either
++ *		by explicit claim or by omission.
++ *
++ *	3. Altered versions must be plainly marked as such, and must not
++ *		be misrepresented as being the original software.
++ *
++ *
++ * This code was modified by Ethan Sommer to work within the kernel
++ * (it now uses kmalloc etc..)
++ *
++ */
++#include "regexp.h"
++#include "regmagic.h"
++#include <linux/string.h>
++
++
++#ifndef CHARBITS
++#define	UCHARAT(p)	((int)*(unsigned char *)(p))
++#else
++#define	UCHARAT(p)	((int)*(p)&CHARBITS)
++#endif
++
++#if 0
++//void regerror(char * s)
++//{
++//        printk("regexp(3): %s", s);
++//        /* NOTREACHED */
++//}
++#endif
++
++/*
++ - regsub - perform substitutions after a regexp match
++ */
++void
++regsub(regexp * prog, char * source, char * dest)
++{
++	register char *src;
++	register char *dst;
++	register char c;
++	register int no;
++	register int len;
++	
++	/* Not necessary and gcc doesn't like it -MLS */
++	/*extern char *strncpy();*/
++
++	if (prog == NULL || source == NULL || dest == NULL) {
++		regerror("NULL parm to regsub");
++		return;
++	}
++	if (UCHARAT(prog->program) != MAGIC) {
++		regerror("damaged regexp fed to regsub");
++		return;
++	}
++
++	src = source;
++	dst = dest;
++	while ((c = *src++) != '\0') {
++		if (c == '&')
++			no = 0;
++		else if (c == '\\' && '0' <= *src && *src <= '9')
++			no = *src++ - '0';
++		else
++			no = -1;
++
++		if (no < 0) {	/* Ordinary character. */
++			if (c == '\\' && (*src == '\\' || *src == '&'))
++				c = *src++;
++			*dst++ = c;
++		} else if (prog->startp[no] != NULL && prog->endp[no] != NULL) {
++			len = prog->endp[no] - prog->startp[no];
++			(void) strncpy(dst, prog->startp[no], len);
++			dst += len;
++			if (len != 0 && *(dst-1) == '\0') {	/* strncpy hit NUL. */
++				regerror("damaged match string");
++				return;
++			}
++		}
++	}
++	*dst++ = '\0';
++}
+--- /dev/null
++++ b/net/netfilter/xt_layer7.c
+@@ -0,0 +1,666 @@
++/*
++  Kernel module to match application layer (OSI layer 7) data in connections.
++
++  http://l7-filter.sf.net
++
++  (C) 2003-2009 Matthew Strait and Ethan Sommer.
++
++  This program is free software; you can redistribute it and/or
++  modify it under the terms of the GNU General Public License
++  as published by the Free Software Foundation; either version
++  2 of the License, or (at your option) any later version.
++  http://www.gnu.org/licenses/gpl.txt
++
++  Based on ipt_string.c (C) 2000 Emmanuel Roger <winfield@freegates.be>,
++  xt_helper.c (C) 2002 Harald Welte and cls_layer7.c (C) 2003 Matthew Strait,
++  Ethan Sommer, Justin Levandoski.
++*/
++
++#include <linux/spinlock.h>
++#include <linux/version.h>
++#include <net/ip.h>
++#include <net/tcp.h>
++#include <linux/module.h>
++#include <linux/skbuff.h>
++#include <linux/netfilter.h>
++#include <net/netfilter/nf_conntrack.h>
++#include <net/netfilter/nf_conntrack_core.h>
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)
++#include <net/netfilter/nf_conntrack_extend.h>
++#include <net/netfilter/nf_conntrack_acct.h>
++#endif
++#include <linux/netfilter/x_tables.h>
++#include <linux/netfilter/xt_layer7.h>
++#include <linux/ctype.h>
++#include <linux/proc_fs.h>
++
++#include "regexp/regexp.c"
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Matthew Strait <quadong@users.sf.net>, Ethan Sommer <sommere@users.sf.net>");
++MODULE_DESCRIPTION("iptables application layer match module");
++MODULE_ALIAS("ipt_layer7");
++MODULE_VERSION("2.21");
++
++static int maxdatalen = 2048; // this is the default
++module_param(maxdatalen, int, 0444);
++MODULE_PARM_DESC(maxdatalen, "maximum bytes of data looked at by l7-filter");
++#ifdef CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG
++	#define DPRINTK(format,args...) printk(format,##args)
++#else
++	#define DPRINTK(format,args...)
++#endif
++
++/* Number of packets whose data we look at.
++This can be modified through /proc/net/layer7_numpackets */
++static int num_packets = 10;
++
++static struct pattern_cache {
++	char * regex_string;
++	regexp * pattern;
++	struct pattern_cache * next;
++} * first_pattern_cache = NULL;
++
++DEFINE_SPINLOCK(l7_lock);
++
++static int total_acct_packets(struct nf_conn *ct)
++{
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 26)
++	BUG_ON(ct == NULL);
++	return (ct->counters[IP_CT_DIR_ORIGINAL].packets + ct->counters[IP_CT_DIR_REPLY].packets);
++#else
++	struct nf_conn_counter *acct;
++
++	BUG_ON(ct == NULL);
++	acct = nf_conn_acct_find(ct);
++	if (!acct)
++		return 0;
++	return (acct[IP_CT_DIR_ORIGINAL].packets + acct[IP_CT_DIR_REPLY].packets);
++#endif
++}
++
++#ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG
++/* Converts an unfriendly string into a friendly one by
++replacing unprintables with periods and all whitespace with " ". */
++static char * friendly_print(unsigned char * s)
++{
++	char * f = kmalloc(strlen(s) + 1, GFP_ATOMIC);
++	int i;
++
++	if(!f) {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory in "
++					"friendly_print, bailing.\n");
++		return NULL;
++	}
++
++	for(i = 0; i < strlen(s); i++){
++		if(isprint(s[i]) && s[i] < 128)	f[i] = s[i];
++		else if(isspace(s[i]))		f[i] = ' ';
++		else 				f[i] = '.';
++	}
++	f[i] = '\0';
++	return f;
++}
++
++static char dec2hex(int i)
++{
++	switch (i) {
++		case 0 ... 9:
++			return (i + '0');
++			break;
++		case 10 ... 15:
++			return (i - 10 + 'a');
++			break;
++		default:
++			if (net_ratelimit())
++				printk("layer7: Problem in dec2hex\n");
++			return '\0';
++	}
++}
++
++static char * hex_print(unsigned char * s)
++{
++	char * g = kmalloc(strlen(s)*3 + 1, GFP_ATOMIC);
++	int i;
++
++	if(!g) {
++	       if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory in hex_print, "
++					"bailing.\n");
++	       return NULL;
++	}
++
++	for(i = 0; i < strlen(s); i++) {
++		g[i*3    ] = dec2hex(s[i]/16);
++		g[i*3 + 1] = dec2hex(s[i]%16);
++		g[i*3 + 2] = ' ';
++	}
++	g[i*3] = '\0';
++
++	return g;
++}
++#endif // DEBUG
++
++/* Use instead of regcomp.  As we expect to be seeing the same regexps over and
++over again, it make sense to cache the results. */
++static regexp * compile_and_cache(const char * regex_string, 
++                                  const char * protocol)
++{
++	struct pattern_cache * node               = first_pattern_cache;
++	struct pattern_cache * last_pattern_cache = first_pattern_cache;
++	struct pattern_cache * tmp;
++	unsigned int len;
++
++	while (node != NULL) {
++		if (!strcmp(node->regex_string, regex_string))
++		return node->pattern;
++
++		last_pattern_cache = node;/* points at the last non-NULL node */
++		node = node->next;
++	}
++
++	/* If we reach the end of the list, then we have not yet cached
++	   the pattern for this regex. Let's do that now.
++	   Be paranoid about running out of memory to avoid list corruption. */
++	tmp = kmalloc(sizeof(struct pattern_cache), GFP_ATOMIC);
++
++	if(!tmp) {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory in "
++					"compile_and_cache, bailing.\n");
++		return NULL;
++	}
++
++	tmp->regex_string  = kmalloc(strlen(regex_string) + 1, GFP_ATOMIC);
++	tmp->pattern       = kmalloc(sizeof(struct regexp),    GFP_ATOMIC);
++	tmp->next = NULL;
++
++	if(!tmp->regex_string || !tmp->pattern) {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory in "
++					"compile_and_cache, bailing.\n");
++		kfree(tmp->regex_string);
++		kfree(tmp->pattern);
++		kfree(tmp);
++		return NULL;
++	}
++
++	/* Ok.  The new node is all ready now. */
++	node = tmp;
++
++	if(first_pattern_cache == NULL) /* list is empty */
++		first_pattern_cache = node; /* make node the beginning */
++	else
++		last_pattern_cache->next = node; /* attach node to the end */
++
++	/* copy the string and compile the regex */
++	len = strlen(regex_string);
++	DPRINTK("About to compile this: \"%s\"\n", regex_string);
++	node->pattern = regcomp((char *)regex_string, &len);
++	if ( !node->pattern ) {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: Error compiling regexp "
++					"\"%s\" (%s)\n", 
++					regex_string, protocol);
++		/* pattern is now cached as NULL, so we won't try again. */
++	}
++
++	strcpy(node->regex_string, regex_string);
++	return node->pattern;
++}
++
++static int can_handle(const struct sk_buff *skb)
++{
++	if(!ip_hdr(skb)) /* not IP */
++		return 0;
++	if(ip_hdr(skb)->protocol != IPPROTO_TCP &&
++	   ip_hdr(skb)->protocol != IPPROTO_UDP &&
++	   ip_hdr(skb)->protocol != IPPROTO_ICMP)
++		return 0;
++	return 1;
++}
++
++/* Returns offset the into the skb->data that the application data starts */
++static int app_data_offset(const struct sk_buff *skb)
++{
++	/* In case we are ported somewhere (ebtables?) where ip_hdr(skb)
++	isn't set, this can be gotten from 4*(skb->data[0] & 0x0f) as well. */
++	int ip_hl = 4*ip_hdr(skb)->ihl;
++
++	if( ip_hdr(skb)->protocol == IPPROTO_TCP ) {
++		/* 12 == offset into TCP header for the header length field.
++		Can't get this with skb->h.th->doff because the tcphdr
++		struct doesn't get set when routing (this is confirmed to be
++		true in Netfilter as well as QoS.) */
++		int tcp_hl = 4*(skb->data[ip_hl + 12] >> 4);
++
++		return ip_hl + tcp_hl;
++	} else if( ip_hdr(skb)->protocol == IPPROTO_UDP  ) {
++		return ip_hl + 8; /* UDP header is always 8 bytes */
++	} else if( ip_hdr(skb)->protocol == IPPROTO_ICMP ) {
++		return ip_hl + 8; /* ICMP header is 8 bytes */
++	} else {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: tried to handle unknown "
++					"protocol!\n");
++		return ip_hl + 8; /* something reasonable */
++	}
++}
++
++/* handles whether there's a match when we aren't appending data anymore */
++static int match_no_append(struct nf_conn * conntrack, 
++                           struct nf_conn * master_conntrack, 
++                           enum ip_conntrack_info ctinfo,
++                           enum ip_conntrack_info master_ctinfo,
++                           const struct xt_layer7_info * info)
++{
++	/* If we're in here, throw the app data away */
++	if(master_conntrack->layer7.app_data != NULL) {
++
++	#ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG
++		if(!master_conntrack->layer7.app_proto) {
++			char * f = 
++			  friendly_print(master_conntrack->layer7.app_data);
++			char * g = 
++			  hex_print(master_conntrack->layer7.app_data);
++			DPRINTK("\nl7-filter gave up after %d bytes "
++				"(%d packets):\n%s\n",
++				strlen(f), total_acct_packets(master_conntrack), f);
++			kfree(f);
++			DPRINTK("In hex: %s\n", g);
++			kfree(g);
++		}
++	#endif
++
++		kfree(master_conntrack->layer7.app_data);
++		master_conntrack->layer7.app_data = NULL; /* don't free again */
++	}
++
++	if(master_conntrack->layer7.app_proto){
++		/* Here child connections set their .app_proto (for /proc) */
++		if(!conntrack->layer7.app_proto) {
++			conntrack->layer7.app_proto = 
++			  kmalloc(strlen(master_conntrack->layer7.app_proto)+1, 
++			    GFP_ATOMIC);
++			if(!conntrack->layer7.app_proto){
++				if (net_ratelimit())
++					printk(KERN_ERR "layer7: out of memory "
++							"in match_no_append, "
++							"bailing.\n");
++				return 1;
++			}
++			strcpy(conntrack->layer7.app_proto, 
++				master_conntrack->layer7.app_proto);
++		}
++
++		return (!strcmp(master_conntrack->layer7.app_proto, 
++				info->protocol));
++	}
++	else {
++		/* If not classified, set to "unknown" to distinguish from
++		connections that are still being tested. */
++		master_conntrack->layer7.app_proto = 
++			kmalloc(strlen("unknown")+1, GFP_ATOMIC);
++		if(!master_conntrack->layer7.app_proto){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: out of memory in "
++						"match_no_append, bailing.\n");
++			return 1;
++		}
++		strcpy(master_conntrack->layer7.app_proto, "unknown");
++		return 0;
++	}
++}
++
++/* add the new app data to the conntrack.  Return number of bytes added. */
++static int add_data(struct nf_conn * master_conntrack,
++                    char * app_data, int appdatalen)
++{
++	int length = 0, i;
++	int oldlength = master_conntrack->layer7.app_data_len;
++
++	/* This is a fix for a race condition by Deti Fliegl. However, I'm not 
++	   clear on whether the race condition exists or whether this really 
++	   fixes it.  I might just be being dense... Anyway, if it's not really 
++	   a fix, all it does is waste a very small amount of time. */
++	if(!master_conntrack->layer7.app_data) return 0;
++
++	/* Strip nulls. Make everything lower case (our regex lib doesn't
++	do case insensitivity).  Add it to the end of the current data. */
++	for(i = 0; i < maxdatalen-oldlength-1 &&
++		   i < appdatalen; i++) {
++		if(app_data[i] != '\0') {
++			/* the kernel version of tolower mungs 'upper ascii' */
++			master_conntrack->layer7.app_data[length+oldlength] =
++				isascii(app_data[i])? 
++					tolower(app_data[i]) : app_data[i];
++			length++;
++		}
++	}
++
++	master_conntrack->layer7.app_data[length+oldlength] = '\0';
++	master_conntrack->layer7.app_data_len = length + oldlength;
++
++	return length;
++}
++
++/* taken from drivers/video/modedb.c */
++static int my_atoi(const char *s)
++{
++	int val = 0;
++
++	for (;; s++) {
++		switch (*s) {
++			case '0'...'9':
++			val = 10*val+(*s-'0');
++			break;
++		default:
++			return val;
++		}
++	}
++}
++
++/* write out num_packets to userland. */
++static int layer7_read_proc(char* page, char ** start, off_t off, int count,
++                            int* eof, void * data)
++{
++	if(num_packets > 99 && net_ratelimit())
++		printk(KERN_ERR "layer7: NOT REACHED. num_packets too big\n");
++
++	page[0] = num_packets/10 + '0';
++	page[1] = num_packets%10 + '0';
++	page[2] = '\n';
++	page[3] = '\0';
++
++	*eof=1;
++
++	return 3;
++}
++
++/* Read in num_packets from userland */
++static int layer7_write_proc(struct file* file, const char* buffer,
++                             unsigned long count, void *data)
++{
++	char * foo = kmalloc(count, GFP_ATOMIC);
++
++	if(!foo){
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory, bailing. "
++					"num_packets unchanged.\n");
++		return count;
++	}
++
++	if(copy_from_user(foo, buffer, count)) {
++		return -EFAULT;
++	}
++
++
++	num_packets = my_atoi(foo);
++	kfree (foo);
++
++	/* This has an arbitrary limit to make the math easier. I'm lazy.
++	But anyway, 99 is a LOT! If you want more, you're doing it wrong! */
++	if(num_packets > 99) {
++		printk(KERN_WARNING "layer7: num_packets can't be > 99.\n");
++		num_packets = 99;
++	} else if(num_packets < 1) {
++		printk(KERN_WARNING "layer7: num_packets can't be < 1.\n");
++		num_packets = 1;
++	}
++
++	return count;
++}
++
++static bool
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++match(const struct sk_buff *skbin, const struct xt_match_param *par)
++#else
++match(const struct sk_buff *skbin,
++      const struct net_device *in,
++      const struct net_device *out,
++      const struct xt_match *match,
++      const void *matchinfo,
++      int offset,
++      unsigned int protoff,
++      bool *hotdrop)
++#endif
++{
++	/* sidestep const without getting a compiler warning... */
++	struct sk_buff * skb = (struct sk_buff *)skbin; 
++
++	const struct xt_layer7_info * info = 
++	#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++		par->matchinfo;
++	#else
++		matchinfo;
++	#endif
++
++	enum ip_conntrack_info master_ctinfo, ctinfo;
++	struct nf_conn *master_conntrack, *conntrack;
++	unsigned char * app_data;
++	unsigned int pattern_result, appdatalen;
++	regexp * comppattern;
++
++	/* Be paranoid/incompetent - lock the entire match function. */
++	spin_lock_bh(&l7_lock);
++
++	if(!can_handle(skb)){
++		DPRINTK("layer7: This is some protocol I can't handle.\n");
++		spin_unlock_bh(&l7_lock);
++		return info->invert;
++	}
++
++	/* Treat parent & all its children together as one connection, except
++	for the purpose of setting conntrack->layer7.app_proto in the actual
++	connection. This makes /proc/net/ip_conntrack more satisfying. */
++	if(!(conntrack = nf_ct_get(skb, &ctinfo)) ||
++	   !(master_conntrack=nf_ct_get(skb,&master_ctinfo))){
++		DPRINTK("layer7: couldn't get conntrack.\n");
++		spin_unlock_bh(&l7_lock);
++		return info->invert;
++	}
++
++	/* Try to get a master conntrack (and its master etc) for FTP, etc. */
++	while (master_ct(master_conntrack) != NULL)
++		master_conntrack = master_ct(master_conntrack);
++
++	/* if we've classified it or seen too many packets */
++	if(total_acct_packets(master_conntrack) > num_packets ||
++	   master_conntrack->layer7.app_proto) {
++
++		pattern_result = match_no_append(conntrack, master_conntrack, 
++						 ctinfo, master_ctinfo, info);
++
++		/* skb->cb[0] == seen. Don't do things twice if there are 
++		multiple l7 rules. I'm not sure that using cb for this purpose 
++		is correct, even though it says "put your private variables 
++		there". But it doesn't look like it is being used for anything
++		else in the skbs that make it here. */
++		skb->cb[0] = 1; /* marking it seen here's probably irrelevant */
++
++		spin_unlock_bh(&l7_lock);
++		return (pattern_result ^ info->invert);
++	}
++
++	if(skb_is_nonlinear(skb)){
++		if(skb_linearize(skb) != 0){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: failed to linearize "
++						"packet, bailing.\n");
++			spin_unlock_bh(&l7_lock);
++			return info->invert;
++		}
++	}
++
++	/* now that the skb is linearized, it's safe to set these. */
++	app_data = skb->data + app_data_offset(skb);
++	appdatalen = skb_tail_pointer(skb) - app_data;
++
++	/* the return value gets checked later, when we're ready to use it */
++	comppattern = compile_and_cache(info->pattern, info->protocol);
++
++	/* On the first packet of a connection, allocate space for app data */
++	if(total_acct_packets(master_conntrack) == 1 && !skb->cb[0] && 
++	   !master_conntrack->layer7.app_data){
++		master_conntrack->layer7.app_data = 
++			kmalloc(maxdatalen, GFP_ATOMIC);
++		if(!master_conntrack->layer7.app_data){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: out of memory in "
++						"match, bailing.\n");
++			spin_unlock_bh(&l7_lock);
++			return info->invert;
++		}
++
++		master_conntrack->layer7.app_data[0] = '\0';
++	}
++
++	/* Can be here, but unallocated, if numpackets is increased near
++	the beginning of a connection */
++	if(master_conntrack->layer7.app_data == NULL){
++		spin_unlock_bh(&l7_lock);
++		return info->invert; /* unmatched */
++	}
++
++	if(!skb->cb[0]){
++		int newbytes;
++		newbytes = add_data(master_conntrack, app_data, appdatalen);
++
++		if(newbytes == 0) { /* didn't add any data */
++			skb->cb[0] = 1;
++			/* Didn't match before, not going to match now */
++			spin_unlock_bh(&l7_lock);
++			return info->invert;
++		}
++	}
++
++	/* If looking for "unknown", then never match.  "Unknown" means that
++	we've given up; we're still trying with these packets. */
++	if(!strcmp(info->protocol, "unknown")) {
++		pattern_result = 0;
++	/* If looking for "unset", then always match. "Unset" means that we
++	haven't yet classified the connection. */
++	} else if(!strcmp(info->protocol, "unset")) {
++		pattern_result = 2;
++		DPRINTK("layer7: matched unset: not yet classified "
++			"(%d/%d packets)\n",
++                        total_acct_packets(master_conntrack), num_packets);
++	/* If the regexp failed to compile, don't bother running it */
++	} else if(comppattern && 
++		  regexec(comppattern, master_conntrack->layer7.app_data)){
++		DPRINTK("layer7: matched %s\n", info->protocol);
++		pattern_result = 1;
++	} else pattern_result = 0;
++
++	if(pattern_result == 1) {
++		master_conntrack->layer7.app_proto = 
++			kmalloc(strlen(info->protocol)+1, GFP_ATOMIC);
++		if(!master_conntrack->layer7.app_proto){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: out of memory in "
++						"match, bailing.\n");
++			spin_unlock_bh(&l7_lock);
++			return (pattern_result ^ info->invert);
++		}
++		strcpy(master_conntrack->layer7.app_proto, info->protocol);
++	} else if(pattern_result > 1) { /* cleanup from "unset" */
++		pattern_result = 1;
++	}
++
++	/* mark the packet seen */
++	skb->cb[0] = 1;
++
++	spin_unlock_bh(&l7_lock);
++	return (pattern_result ^ info->invert);
++}
++
++// load nf_conntrack_ipv4
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++static bool check(const struct xt_mtchk_param *par)
++{
++        if (nf_ct_l3proto_try_module_get(par->match->family) < 0) {
++                printk(KERN_WARNING "can't load conntrack support for "
++                                    "proto=%d\n", par->match->family);
++#else
++static bool check(const char *tablename, const void *inf,
++		 const struct xt_match *match, void *matchinfo,
++		 unsigned int hook_mask)
++{
++        if (nf_ct_l3proto_try_module_get(match->family) < 0) {
++                printk(KERN_WARNING "can't load conntrack support for "
++                                    "proto=%d\n", match->family);
++#endif
++                return 0;
++        }
++	return 1;
++}
++
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++	static void destroy(const struct xt_mtdtor_param *par)
++	{
++		nf_ct_l3proto_module_put(par->match->family);
++	}
++#else
++	static void destroy(const struct xt_match *match, void *matchinfo)
++	{
++		nf_ct_l3proto_module_put(match->family);
++	}
++#endif
++
++static struct xt_match xt_layer7_match[] __read_mostly = {
++{
++	.name		= "layer7",
++	.family		= AF_INET,
++	.checkentry	= check,
++	.match		= match,
++	.destroy	= destroy,
++	.matchsize	= sizeof(struct xt_layer7_info),
++	.me		= THIS_MODULE
++}
++};
++
++static void layer7_cleanup_proc(void)
++{
++	remove_proc_entry("layer7_numpackets", init_net.proc_net);
++}
++
++/* register the proc file */
++static void layer7_init_proc(void)
++{
++	struct proc_dir_entry* entry;
++	entry = create_proc_entry("layer7_numpackets", 0644, init_net.proc_net);
++	entry->read_proc = layer7_read_proc;
++	entry->write_proc = layer7_write_proc;
++}
++
++static int __init xt_layer7_init(void)
++{
++	need_conntrack();
++
++	layer7_init_proc();
++	if(maxdatalen < 1) {
++		printk(KERN_WARNING "layer7: maxdatalen can't be < 1, "
++			"using 1\n");
++		maxdatalen = 1;
++	}
++	/* This is not a hard limit.  It's just here to prevent people from
++	bringing their slow machines to a grinding halt. */
++	else if(maxdatalen > 65536) {
++		printk(KERN_WARNING "layer7: maxdatalen can't be > 65536, "
++			"using 65536\n");
++		maxdatalen = 65536;
++	}
++	return xt_register_matches(xt_layer7_match,
++				   ARRAY_SIZE(xt_layer7_match));
++}
++
++static void __exit xt_layer7_fini(void)
++{
++	layer7_cleanup_proc();
++	xt_unregister_matches(xt_layer7_match, ARRAY_SIZE(xt_layer7_match));
++}
++
++module_init(xt_layer7_init);
++module_exit(xt_layer7_fini);
diff --git a/target/linux/generic/patches-2.6.33/101-netfilter_layer7_pktmatch.patch b/target/linux/generic/patches-2.6.33/101-netfilter_layer7_pktmatch.patch
new file mode 100644
index 0000000000..f65e301fd1
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/101-netfilter_layer7_pktmatch.patch
@@ -0,0 +1,108 @@
+--- a/include/linux/netfilter/xt_layer7.h
++++ b/include/linux/netfilter/xt_layer7.h
+@@ -8,6 +8,7 @@ struct xt_layer7_info {
+     char protocol[MAX_PROTOCOL_LEN];
+     char pattern[MAX_PATTERN_LEN];
+     u_int8_t invert;
++    u_int8_t pkt;
+ };
+ 
+ #endif /* _XT_LAYER7_H */
+--- a/net/netfilter/xt_layer7.c
++++ b/net/netfilter/xt_layer7.c
+@@ -314,33 +314,35 @@ static int match_no_append(struct nf_con
+ }
+ 
+ /* add the new app data to the conntrack.  Return number of bytes added. */
+-static int add_data(struct nf_conn * master_conntrack,
+-                    char * app_data, int appdatalen)
++static int add_datastr(char *target, int offset, char *app_data, int len)
+ {
+ 	int length = 0, i;
+-	int oldlength = master_conntrack->layer7.app_data_len;
+-
+-	/* This is a fix for a race condition by Deti Fliegl. However, I'm not 
+-	   clear on whether the race condition exists or whether this really 
+-	   fixes it.  I might just be being dense... Anyway, if it's not really 
+-	   a fix, all it does is waste a very small amount of time. */
+-	if(!master_conntrack->layer7.app_data) return 0;
++	if (!target) return 0;
+ 
+ 	/* Strip nulls. Make everything lower case (our regex lib doesn't
+ 	do case insensitivity).  Add it to the end of the current data. */
+-	for(i = 0; i < maxdatalen-oldlength-1 &&
+-		   i < appdatalen; i++) {
++ 	for(i = 0; i < maxdatalen-offset-1 && i < len; i++) {
+ 		if(app_data[i] != '\0') {
+ 			/* the kernel version of tolower mungs 'upper ascii' */
+-			master_conntrack->layer7.app_data[length+oldlength] =
++			target[length+offset] =
+ 				isascii(app_data[i])? 
+ 					tolower(app_data[i]) : app_data[i];
+ 			length++;
+ 		}
+ 	}
++	target[length+offset] = '\0';
++
++	return length;
++}
++
++/* add the new app data to the conntrack.  Return number of bytes added. */
++static int add_data(struct nf_conn * master_conntrack,
++                    char * app_data, int appdatalen)
++{
++	int length;
+ 
+-	master_conntrack->layer7.app_data[length+oldlength] = '\0';
+-	master_conntrack->layer7.app_data_len = length + oldlength;
++	length = add_datastr(master_conntrack->layer7.app_data, master_conntrack->layer7.app_data_len, app_data, appdatalen);
++	master_conntrack->layer7.app_data_len += length;
+ 
+ 	return length;
+ }
+@@ -438,7 +440,7 @@ match(const struct sk_buff *skbin,
+ 
+ 	enum ip_conntrack_info master_ctinfo, ctinfo;
+ 	struct nf_conn *master_conntrack, *conntrack;
+-	unsigned char * app_data;
++	unsigned char *app_data, *tmp_data;
+ 	unsigned int pattern_result, appdatalen;
+ 	regexp * comppattern;
+ 
+@@ -466,8 +468,8 @@ match(const struct sk_buff *skbin,
+ 		master_conntrack = master_ct(master_conntrack);
+ 
+ 	/* if we've classified it or seen too many packets */
+-	if(total_acct_packets(master_conntrack) > num_packets ||
+-	   master_conntrack->layer7.app_proto) {
++	if(!info->pkt && (total_acct_packets(master_conntrack) > num_packets ||
++	   master_conntrack->layer7.app_proto)) {
+ 
+ 		pattern_result = match_no_append(conntrack, master_conntrack, 
+ 						 ctinfo, master_ctinfo, info);
+@@ -500,6 +502,25 @@ match(const struct sk_buff *skbin,
+ 	/* the return value gets checked later, when we're ready to use it */
+ 	comppattern = compile_and_cache(info->pattern, info->protocol);
+ 
++	if (info->pkt) {
++		tmp_data = kmalloc(maxdatalen, GFP_ATOMIC);
++		if(!tmp_data){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: out of memory in match, bailing.\n");
++			return info->invert;
++		}
++
++		tmp_data[0] = '\0';
++		add_datastr(tmp_data, 0, app_data, appdatalen);
++		pattern_result = ((comppattern && regexec(comppattern, tmp_data)) ? 1 : 0);
++
++		kfree(tmp_data);
++		tmp_data = NULL;
++		spin_unlock_bh(&l7_lock);
++
++		return (pattern_result ^ info->invert);
++	}
++
+ 	/* On the first packet of a connection, allocate space for app data */
+ 	if(total_acct_packets(master_conntrack) == 1 && !skb->cb[0] && 
+ 	   !master_conntrack->layer7.app_data){
diff --git a/target/linux/generic/patches-2.6.33/110-netfilter_match_speedup.patch b/target/linux/generic/patches-2.6.33/110-netfilter_match_speedup.patch
new file mode 100644
index 0000000000..e99c6db4d1
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/110-netfilter_match_speedup.patch
@@ -0,0 +1,144 @@
+--- a/include/linux/netfilter_ipv4/ip_tables.h
++++ b/include/linux/netfilter_ipv4/ip_tables.h
+@@ -62,6 +62,7 @@ struct ipt_ip {
+ #define IPT_F_FRAG		0x01	/* Set if rule is a fragment rule */
+ #define IPT_F_GOTO		0x02	/* Set if jump is a goto */
+ #define IPT_F_MASK		0x03	/* All possible flag bits mask. */
++#define IPT_F_NO_DEF_MATCH	0x80	/* Internal: no default match rules present */
+ 
+ /* Values for "inv" field in struct ipt_ip. */
+ #define IPT_INV_VIA_IN		0x01	/* Invert the sense of IN IFACE. */
+--- a/net/ipv4/netfilter/ip_tables.c
++++ b/net/ipv4/netfilter/ip_tables.c
+@@ -88,6 +88,9 @@ ip_packet_match(const struct iphdr *ip,
+ 
+ #define FWINV(bool, invflg) ((bool) ^ !!(ipinfo->invflags & (invflg)))
+ 
++	if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
++		return true;
++
+ 	if (FWINV((ip->saddr&ipinfo->smsk.s_addr) != ipinfo->src.s_addr,
+ 		  IPT_INV_SRCIP) ||
+ 	    FWINV((ip->daddr&ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr,
+@@ -138,13 +141,35 @@ ip_packet_match(const struct iphdr *ip,
+ 		return false;
+ 	}
+ 
++#undef FWINV
+ 	return true;
+ }
+ 
+ static bool
+-ip_checkentry(const struct ipt_ip *ip)
++ip_checkentry(struct ipt_ip *ip)
+ {
+-	if (ip->flags & ~IPT_F_MASK) {
++#define FWINV(bool, invflg) ((bool) || (ip->invflags & (invflg)))
++
++	if (FWINV(ip->smsk.s_addr, IPT_INV_SRCIP) ||
++		FWINV(ip->dmsk.s_addr, IPT_INV_DSTIP))
++		goto has_match_rules;
++
++	if (FWINV(!!((const unsigned long *)ip->iniface_mask)[0],
++		IPT_INV_VIA_IN) ||
++	    FWINV(!!((const unsigned long *)ip->outiface_mask)[0],
++		IPT_INV_VIA_OUT))
++		goto has_match_rules;
++
++	if (FWINV(ip->proto, IPT_INV_PROTO))
++		goto has_match_rules;
++
++	if (FWINV(ip->flags&IPT_F_FRAG, IPT_INV_FRAG))
++		goto has_match_rules;
++
++	ip->flags |= IPT_F_NO_DEF_MATCH;
++
++has_match_rules:
++	if (ip->flags & ~(IPT_F_MASK|IPT_F_NO_DEF_MATCH)) {
+ 		duprintf("Unknown flag bits set: %08X\n",
+ 			 ip->flags & ~IPT_F_MASK);
+ 		return false;
+@@ -154,6 +179,8 @@ ip_checkentry(const struct ipt_ip *ip)
+ 			 ip->invflags & ~IPT_INV_MASK);
+ 		return false;
+ 	}
++
++#undef FWINV
+ 	return true;
+ }
+ 
+@@ -196,7 +223,6 @@ static inline bool unconditional(const s
+ 	static const struct ipt_ip uncond;
+ 
+ 	return memcmp(ip, &uncond, sizeof(uncond)) == 0;
+-#undef FWINV
+ }
+ 
+ #if defined(CONFIG_NETFILTER_XT_TARGET_TRACE) || \
+@@ -321,8 +347,28 @@ ipt_do_table(struct sk_buff *skb,
+ 	struct xt_match_param mtpar;
+ 	struct xt_target_param tgpar;
+ 
+-	/* Initialization */
+ 	ip = ip_hdr(skb);
++
++	IP_NF_ASSERT(table->valid_hooks & (1 << hook));
++	xt_info_rdlock_bh();
++	private = table->private;
++	table_base = private->entries[smp_processor_id()];
++	e = get_entry(table_base, private->hook_entry[hook]);
++
++	if (e->target_offset <= sizeof(struct ipt_entry) &&
++		(e->ip.flags & IPT_F_NO_DEF_MATCH)) {
++			struct ipt_entry_target *t = ipt_get_target(e);
++			if (!t->u.kernel.target->target) {
++				int v = ((struct ipt_standard_target *)t)->verdict;
++				if ((v < 0) && (v != IPT_RETURN)) {
++					ADD_COUNTER(e->counters, ntohs(ip->tot_len), 1);
++					xt_info_rdunlock_bh();
++					return (unsigned)(-v) - 1;
++				}
++			}
++	}
++
++	/* Initialization */
+ 	indev = in ? in->name : nulldevname;
+ 	outdev = out ? out->name : nulldevname;
+ 	/* We handle fragments by dealing with the first fragment as
+@@ -339,13 +385,6 @@ ipt_do_table(struct sk_buff *skb,
+ 	mtpar.family  = tgpar.family = NFPROTO_IPV4;
+ 	mtpar.hooknum = tgpar.hooknum = hook;
+ 
+-	IP_NF_ASSERT(table->valid_hooks & (1 << hook));
+-	xt_info_rdlock_bh();
+-	private = table->private;
+-	table_base = private->entries[smp_processor_id()];
+-
+-	e = get_entry(table_base, private->hook_entry[hook]);
+-
+ 	/* For return from builtin chain */
+ 	back = get_entry(table_base, private->underflow[hook]);
+ 
+@@ -992,6 +1031,7 @@ copy_entries_to_user(unsigned int total_
+ 		unsigned int i;
+ 		const struct ipt_entry_match *m;
+ 		const struct ipt_entry_target *t;
++		u8 flags;
+ 
+ 		e = (struct ipt_entry *)(loc_cpu_entry + off);
+ 		if (copy_to_user(userptr + off
+@@ -1002,6 +1042,14 @@ copy_entries_to_user(unsigned int total_
+ 			goto free_counters;
+ 		}
+ 
++		flags = e->ip.flags & ~IPT_F_NO_DEF_MATCH;
++		if (copy_to_user(userptr + off
++				 + offsetof(struct ipt_entry, ip.flags),
++				 &flags, sizeof(flags)) != 0) {
++			ret = -EFAULT;
++			goto free_counters;
++		}
++
+ 		for (i = sizeof(struct ipt_entry);
+ 		     i < e->target_offset;
+ 		     i += m->u.match_size) {
diff --git a/target/linux/generic/patches-2.6.33/150-netfilter_imq.patch b/target/linux/generic/patches-2.6.33/150-netfilter_imq.patch
new file mode 100644
index 0000000000..c078e37e61
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/150-netfilter_imq.patch
@@ -0,0 +1,1337 @@
+--- /dev/null
++++ b/drivers/net/imq.c
+@@ -0,0 +1,632 @@
++/*
++ *             Pseudo-driver for the intermediate queue device.
++ *
++ *             This program is free software; you can redistribute it and/or
++ *             modify it under the terms of the GNU General Public License
++ *             as published by the Free Software Foundation; either version
++ *             2 of the License, or (at your option) any later version.
++ *
++ * Authors:    Patrick McHardy, <kaber@trash.net>
++ *
++ *            The first version was written by Martin Devera, <devik@cdi.cz>
++ *
++ * Credits:    Jan Rafaj <imq2t@cedric.vabo.cz>
++ *              - Update patch to 2.4.21
++ *             Sebastian Strollo <sstrollo@nortelnetworks.com>
++ *              - Fix "Dead-loop on netdevice imq"-issue
++ *             Marcel Sebek <sebek64@post.cz>
++ *              - Update to 2.6.2-rc1
++ *
++ *	       After some time of inactivity there is a group taking care
++ *	       of IMQ again: http://www.linuximq.net
++ *
++ *
++ *	       2004/06/30 - New version of IMQ patch to kernels <=2.6.7
++ *             including the following changes:
++ *
++ *	       - Correction of ipv6 support "+"s issue (Hasso Tepper)
++ *	       - Correction of imq_init_devs() issue that resulted in
++ *	       kernel OOPS unloading IMQ as module (Norbert Buchmuller)
++ *	       - Addition of functionality to choose number of IMQ devices
++ *	       during kernel config (Andre Correa)
++ *	       - Addition of functionality to choose how IMQ hooks on
++ *	       PRE and POSTROUTING (after or before NAT) (Andre Correa)
++ *	       - Cosmetic corrections (Norbert Buchmuller) (Andre Correa)
++ *
++ *
++ *             2005/12/16 - IMQ versions between 2.6.7 and 2.6.13 were
++ *             released with almost no problems. 2.6.14-x was released
++ *             with some important changes: nfcache was removed; After
++ *             some weeks of trouble we figured out that some IMQ fields
++ *             in skb were missing in skbuff.c - skb_clone and copy_skb_header.
++ *             These functions are correctly patched by this new patch version.
++ *
++ *             Thanks for all who helped to figure out all the problems with
++ *             2.6.14.x: Patrick McHardy, Rune Kock, VeNoMouS, Max CtRiX,
++ *             Kevin Shanahan, Richard Lucassen, Valery Dachev (hopefully
++ *             I didn't forget anybody). I apologize again for my lack of time.
++ *
++ *
++ *             2008/06/17 - 2.6.25 - Changed imq.c to use qdisc_run() instead 
++ *             of qdisc_restart() and moved qdisc_run() to tasklet to avoid
++ *             recursive locking. New initialization routines to fix 'rmmod' not
++ *             working anymore. Used code from ifb.c. (Jussi Kivilinna)
++ *
++ *             2008/08/06 - 2.6.26 - (JK)
++ *              - Replaced tasklet with 'netif_schedule()'.
++ *              - Cleaned up and added comments for imq_nf_queue().
++ *
++ *             2009/04/12
++ *              - Add skb_save_cb/skb_restore_cb helper functions for backuping
++ *                control buffer. This is needed because qdisc-layer on kernels
++ *                2.6.27 and newer overwrite control buffer. (Jussi Kivilinna)
++ *              - Add better locking for IMQ device. Hopefully this will solve
++ *                SMP issues. (Jussi Kivilinna)
++ *              - Port to 2.6.27
++ *              - Port to 2.6.28
++ *              - Port to 2.6.29 + fix rmmod not working
++ *
++ *             2009/04/20 - (Jussi Kivilinna)
++ *              - Use netdevice feature flags to avoid extra packet handling
++ *                by core networking layer and possibly increase performance.
++ *
++ *             2009/09/26 - (Jussi Kivilinna)
++ *              - Add imq_nf_reinject_lockless to fix deadlock with
++ *                imq_nf_queue/imq_nf_reinject.
++ *
++ *             2009/12/08 - (Jussi Kivilinna)
++ *              - Port to 2.6.32
++ *              - Add check for skb->nf_queue_entry==NULL in imq_dev_xmit()
++ *              - Also add better error checking for skb->nf_queue_entry usage
++ *
++ *	       Also, many thanks to pablo Sebastian Greco for making the initial
++ *	       patch and to those who helped the testing.
++ *
++ *             More info at: http://www.linuximq.net/ (Andre Correa)
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/moduleparam.h>
++#include <linux/list.h>
++#include <linux/skbuff.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/rtnetlink.h>
++#include <linux/if_arp.h>
++#include <linux/netfilter.h>
++#include <linux/netfilter_ipv4.h>
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++	#include <linux/netfilter_ipv6.h>
++#endif
++#include <linux/imq.h>
++#include <net/pkt_sched.h>
++#include <net/netfilter/nf_queue.h>
++
++static nf_hookfn imq_nf_hook;
++
++static struct nf_hook_ops imq_ingress_ipv4 = {
++	.hook		= imq_nf_hook,
++	.owner		= THIS_MODULE,
++	.pf		= PF_INET,
++	.hooknum	= NF_INET_PRE_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++	.priority	= NF_IP_PRI_MANGLE + 1
++#else
++	.priority	= NF_IP_PRI_NAT_DST + 1
++#endif
++};
++
++static struct nf_hook_ops imq_egress_ipv4 = {
++	.hook		= imq_nf_hook,
++	.owner		= THIS_MODULE,
++	.pf		= PF_INET,
++	.hooknum	= NF_INET_POST_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_AA) || defined(CONFIG_IMQ_BEHAVIOR_BA)
++	.priority	= NF_IP_PRI_LAST
++#else
++	.priority	= NF_IP_PRI_NAT_SRC - 1
++#endif
++};
++
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++static struct nf_hook_ops imq_ingress_ipv6 = {
++	.hook		= imq_nf_hook,
++	.owner		= THIS_MODULE,
++	.pf		= PF_INET6,
++	.hooknum	= NF_INET_PRE_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++	.priority	= NF_IP6_PRI_MANGLE + 1
++#else
++	.priority	= NF_IP6_PRI_NAT_DST + 1
++#endif
++};
++
++static struct nf_hook_ops imq_egress_ipv6 = {
++	.hook		= imq_nf_hook,
++	.owner		= THIS_MODULE,
++	.pf		= PF_INET6,
++	.hooknum	= NF_INET_POST_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_AA) || defined(CONFIG_IMQ_BEHAVIOR_BA)
++	.priority	= NF_IP6_PRI_LAST
++#else
++	.priority	= NF_IP6_PRI_NAT_SRC - 1
++#endif
++};
++#endif
++
++#if defined(CONFIG_IMQ_NUM_DEVS)
++static unsigned int numdevs = CONFIG_IMQ_NUM_DEVS;
++#else
++static unsigned int numdevs = IMQ_MAX_DEVS;
++#endif
++
++static DEFINE_SPINLOCK(imq_nf_queue_lock);
++
++static struct net_device *imq_devs_cache[IMQ_MAX_DEVS];
++
++
++static struct net_device_stats *imq_get_stats(struct net_device *dev)
++{
++	return &dev->stats;
++}
++
++/* called for packets kfree'd in qdiscs at places other than enqueue */
++static void imq_skb_destructor(struct sk_buff *skb)
++{
++	struct nf_queue_entry *entry = skb->nf_queue_entry;
++
++	skb->nf_queue_entry = NULL;
++
++	if (entry) {
++		nf_queue_entry_release_refs(entry);
++		kfree(entry);
++	}
++
++	skb_restore_cb(skb); /* kfree backup */
++}
++
++/* locking not needed when called from imq_nf_queue */
++static void imq_nf_reinject_lockless(struct nf_queue_entry *entry,
++						unsigned int verdict)
++{
++	int status;
++
++	if (!entry->next_outfn) {
++		nf_reinject(entry, verdict);
++		return;
++	}
++
++	status = entry->next_outfn(entry, entry->next_queuenum);
++	if (status < 0) {
++		nf_queue_entry_release_refs(entry);
++		kfree_skb(entry->skb);
++		kfree(entry);
++	}
++}
++
++static void imq_nf_reinject(struct nf_queue_entry *entry, unsigned int verdict)
++{
++	int status;
++
++	if (!entry->next_outfn) {
++		spin_lock_bh(&imq_nf_queue_lock);
++		nf_reinject(entry, verdict);
++		spin_unlock_bh(&imq_nf_queue_lock);
++		return;
++	}
++
++	rcu_read_lock();
++	local_bh_disable();
++	status = entry->next_outfn(entry, entry->next_queuenum);
++	local_bh_enable();
++	if (status < 0) {
++		nf_queue_entry_release_refs(entry);
++		kfree_skb(entry->skb);
++		kfree(entry);
++	}
++
++	rcu_read_unlock();
++}
++
++static netdev_tx_t imq_dev_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++	struct nf_queue_entry *entry = skb->nf_queue_entry;
++
++	skb->nf_queue_entry = NULL;
++	dev->trans_start = jiffies;
++
++	dev->stats.tx_bytes += skb->len;
++	dev->stats.tx_packets++;
++
++	if (entry == NULL) {
++		/* We don't know what is going on here.. packet is queued for
++		 * imq device, but (probably) not by us.
++		 *
++		 * If this packet was not send here by imq_nf_queue(), then
++		 * skb_save_cb() was not used and skb_free() should not show:
++		 *   WARNING: IMQ: kfree_skb: skb->cb_next:..
++		 * and/or
++		 *   WARNING: IMQ: kfree_skb: skb->nf_queue_entry...
++		 *
++		 * However if this message is shown, then IMQ is somehow broken
++		 * and you should report this to linuximq.net.
++		 */
++
++		/* imq_dev_xmit is black hole that eats all packets, report that
++		 * we eat this packet happily and increase dropped counters.
++		 */
++
++		dev->stats.tx_dropped++;
++		dev_kfree_skb(skb);
++
++		return NETDEV_TX_OK;
++	}
++
++	skb_restore_cb(skb); /* restore skb->cb */
++
++	skb->imq_flags = 0;
++	skb->destructor = NULL;
++
++	imq_nf_reinject(entry, NF_ACCEPT);
++
++	return NETDEV_TX_OK;
++}
++
++static int imq_nf_queue(struct nf_queue_entry *entry, unsigned queue_num)
++{
++	struct net_device *dev;
++	struct sk_buff *skb_orig, *skb, *skb_shared;
++	struct Qdisc *q;
++	struct netdev_queue *txq;
++	int users, index;
++	int retval = -EINVAL;
++
++	index = entry->skb->imq_flags & IMQ_F_IFMASK;
++	if (unlikely(index > numdevs - 1)) {
++		if (net_ratelimit())
++			printk(KERN_WARNING
++			       "IMQ: invalid device specified, highest is %u\n",
++			       numdevs - 1);
++		retval = -EINVAL;
++		goto out;
++	}
++
++	/* check for imq device by index from cache */
++	dev = imq_devs_cache[index];
++	if (unlikely(!dev)) {
++		char buf[8];
++
++		/* get device by name and cache result */
++		snprintf(buf, sizeof(buf), "imq%d", index);
++		dev = dev_get_by_name(&init_net, buf);
++		if (!dev) {
++			/* not found ?!*/
++			BUG();
++			retval = -ENODEV;
++			goto out;
++		}
++
++		imq_devs_cache[index] = dev;
++		dev_put(dev);
++	}
++
++	if (unlikely(!(dev->flags & IFF_UP))) {
++		entry->skb->imq_flags = 0;
++		imq_nf_reinject_lockless(entry, NF_ACCEPT);
++		retval = 0;
++		goto out;
++	}
++	dev->last_rx = jiffies;
++
++	skb = entry->skb;
++	skb_orig = NULL;
++
++	/* skb has owner? => make clone */
++	if (unlikely(skb->destructor)) {
++		skb_orig = skb;
++		skb = skb_clone(skb, GFP_ATOMIC);
++		if (!skb) {
++			retval = -ENOMEM;
++			goto out;
++		}
++		entry->skb = skb;
++	}
++
++	skb->nf_queue_entry = entry;
++
++	dev->stats.rx_bytes += skb->len;
++	dev->stats.rx_packets++;
++
++	txq = dev_pick_tx(dev, skb);
++
++	q = rcu_dereference(txq->qdisc);
++	if (unlikely(!q->enqueue))
++		goto packet_not_eaten_by_imq_dev;
++
++	spin_lock_bh(qdisc_lock(q));
++
++	users = atomic_read(&skb->users);
++
++	skb_shared = skb_get(skb); /* increase reference count by one */
++	skb_save_cb(skb_shared); /* backup skb->cb, as qdisc layer will
++					overwrite it */
++	qdisc_enqueue_root(skb_shared, q); /* might kfree_skb */
++
++	if (likely(atomic_read(&skb_shared->users) == users + 1)) {
++		kfree_skb(skb_shared); /* decrease reference count by one */
++
++		skb->destructor = &imq_skb_destructor;
++
++		/* cloned? */
++		if (skb_orig)
++			kfree_skb(skb_orig); /* free original */
++
++		spin_unlock_bh(qdisc_lock(q));
++
++		/* schedule qdisc dequeue */
++		__netif_schedule(q);
++
++		retval = 0;
++		goto out;
++	} else {
++		skb_restore_cb(skb_shared); /* restore skb->cb */
++		skb->nf_queue_entry = NULL;
++		/* qdisc dropped packet and decreased skb reference count of
++		 * skb, so we don't really want to and try refree as that would
++		 * actually destroy the skb. */
++		spin_unlock_bh(qdisc_lock(q));
++		goto packet_not_eaten_by_imq_dev;
++	}
++
++packet_not_eaten_by_imq_dev:
++	/* cloned? restore original */
++	if (skb_orig) {
++		kfree_skb(skb);
++		entry->skb = skb_orig;
++	}
++	retval = -1;
++out:
++	return retval;
++}
++
++static struct nf_queue_handler nfqh = {
++	.name  = "imq",
++	.outfn = imq_nf_queue,
++};
++
++static unsigned int imq_nf_hook(unsigned int hook, struct sk_buff *pskb,
++				const struct net_device *indev,
++				const struct net_device *outdev,
++				int (*okfn)(struct sk_buff *))
++{
++	if (pskb->imq_flags & IMQ_F_ENQUEUE)
++		return NF_QUEUE;
++
++	return NF_ACCEPT;
++}
++
++static int imq_close(struct net_device *dev)
++{
++	netif_stop_queue(dev);
++	return 0;
++}
++
++static int imq_open(struct net_device *dev)
++{
++	netif_start_queue(dev);
++	return 0;
++}
++
++static const struct net_device_ops imq_netdev_ops = {
++	.ndo_open		= imq_open,
++	.ndo_stop		= imq_close,
++	.ndo_start_xmit		= imq_dev_xmit,
++	.ndo_get_stats		= imq_get_stats,
++};
++
++static void imq_setup(struct net_device *dev)
++{
++	dev->netdev_ops		= &imq_netdev_ops;
++	dev->type               = ARPHRD_VOID;
++	dev->mtu                = 16000;
++	dev->tx_queue_len       = 11000;
++	dev->flags              = IFF_NOARP;
++	dev->features           = NETIF_F_SG | NETIF_F_FRAGLIST |
++				  NETIF_F_GSO | NETIF_F_HW_CSUM |
++				  NETIF_F_HIGHDMA;
++	dev->priv_flags		&= ~IFF_XMIT_DST_RELEASE;
++}
++
++static int imq_validate(struct nlattr *tb[], struct nlattr *data[])
++{
++	int ret = 0;
++
++	if (tb[IFLA_ADDRESS]) {
++		if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN) {
++			ret = -EINVAL;
++			goto end;
++		}
++		if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS]))) {
++			ret = -EADDRNOTAVAIL;
++			goto end;
++		}
++	}
++	return 0;
++end:
++	printk(KERN_WARNING "IMQ: imq_validate failed (%d)\n", ret);
++	return ret;
++}
++
++static struct rtnl_link_ops imq_link_ops __read_mostly = {
++	.kind		= "imq",
++	.priv_size	= 0,
++	.setup		= imq_setup,
++	.validate	= imq_validate,
++};
++
++static int __init imq_init_hooks(void)
++{
++	int err;
++
++	nf_register_queue_imq_handler(&nfqh);
++
++	err = nf_register_hook(&imq_ingress_ipv4);
++	if (err)
++		goto err1;
++
++	err = nf_register_hook(&imq_egress_ipv4);
++	if (err)
++		goto err2;
++
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++	err = nf_register_hook(&imq_ingress_ipv6);
++	if (err)
++		goto err3;
++
++	err = nf_register_hook(&imq_egress_ipv6);
++	if (err)
++		goto err4;
++#endif
++
++	return 0;
++
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++err4:
++	nf_unregister_hook(&imq_ingress_ipv6);
++err3:
++	nf_unregister_hook(&imq_egress_ipv4);
++#endif
++err2:
++	nf_unregister_hook(&imq_ingress_ipv4);
++err1:
++	nf_unregister_queue_imq_handler();
++	return err;
++}
++
++static int __init imq_init_one(int index)
++{
++	struct net_device *dev;
++	int ret;
++
++	dev = alloc_netdev(0, "imq%d", imq_setup);
++	if (!dev)
++		return -ENOMEM;
++
++	ret = dev_alloc_name(dev, dev->name);
++	if (ret < 0)
++		goto fail;
++
++	dev->rtnl_link_ops = &imq_link_ops;
++	ret = register_netdevice(dev);
++	if (ret < 0)
++		goto fail;
++
++	return 0;
++fail:
++	free_netdev(dev);
++	return ret;
++}
++
++static int __init imq_init_devs(void)
++{
++	int err, i;
++
++	if (numdevs < 1 || numdevs > IMQ_MAX_DEVS) {
++		printk(KERN_ERR "IMQ: numdevs has to be betweed 1 and %u\n",
++		       IMQ_MAX_DEVS);
++		return -EINVAL;
++	}
++
++	rtnl_lock();
++	err = __rtnl_link_register(&imq_link_ops);
++
++	for (i = 0; i < numdevs && !err; i++)
++		err = imq_init_one(i);
++
++	if (err) {
++		__rtnl_link_unregister(&imq_link_ops);
++		memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
++	}
++	rtnl_unlock();
++
++	return err;
++}
++
++static int __init imq_init_module(void)
++{
++	int err;
++
++#if defined(CONFIG_IMQ_NUM_DEVS)
++	BUILD_BUG_ON(CONFIG_IMQ_NUM_DEVS > 16);
++	BUILD_BUG_ON(CONFIG_IMQ_NUM_DEVS < 2);
++	BUILD_BUG_ON(CONFIG_IMQ_NUM_DEVS - 1 > IMQ_F_IFMASK);
++#endif
++
++	err = imq_init_devs();
++	if (err) {
++		printk(KERN_ERR "IMQ: Error trying imq_init_devs(net)\n");
++		return err;
++	}
++
++	err = imq_init_hooks();
++	if (err) {
++		printk(KERN_ERR "IMQ: Error trying imq_init_hooks()\n");
++		rtnl_link_unregister(&imq_link_ops);
++		memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
++		return err;
++	}
++
++	printk(KERN_INFO "IMQ driver loaded successfully.\n");
++
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++	printk(KERN_INFO "\tHooking IMQ before NAT on PREROUTING.\n");
++#else
++	printk(KERN_INFO "\tHooking IMQ after NAT on PREROUTING.\n");
++#endif
++#if defined(CONFIG_IMQ_BEHAVIOR_AB) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++	printk(KERN_INFO "\tHooking IMQ before NAT on POSTROUTING.\n");
++#else
++	printk(KERN_INFO "\tHooking IMQ after NAT on POSTROUTING.\n");
++#endif
++
++	return 0;
++}
++
++static void __exit imq_unhook(void)
++{
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++	nf_unregister_hook(&imq_ingress_ipv6);
++	nf_unregister_hook(&imq_egress_ipv6);
++#endif
++	nf_unregister_hook(&imq_ingress_ipv4);
++	nf_unregister_hook(&imq_egress_ipv4);
++
++	nf_unregister_queue_imq_handler();
++}
++
++static void __exit imq_cleanup_devs(void)
++{
++	rtnl_link_unregister(&imq_link_ops);
++	memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
++}
++
++static void __exit imq_exit_module(void)
++{
++	imq_unhook();
++	imq_cleanup_devs();
++	printk(KERN_INFO "IMQ driver unloaded successfully.\n");
++}
++
++module_init(imq_init_module);
++module_exit(imq_exit_module);
++
++module_param(numdevs, int, 0);
++MODULE_PARM_DESC(numdevs, "number of IMQ devices (how many imq* devices will "
++			"be created)");
++MODULE_AUTHOR("http://www.linuximq.net");
++MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See "
++			"http://www.linuximq.net/ for more information.");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS_RTNL_LINK("imq");
++
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -109,6 +109,129 @@ config EQUALIZER
+ 	  To compile this driver as a module, choose M here: the module
+ 	  will be called eql.  If unsure, say N.
+ 
++config IMQ
++	tristate "IMQ (intermediate queueing device) support"
++	depends on NETDEVICES && NETFILTER
++	---help---
++	  The IMQ device(s) is used as placeholder for QoS queueing
++	  disciplines. Every packet entering/leaving the IP stack can be
++	  directed through the IMQ device where it's enqueued/dequeued to the
++	  attached qdisc. This allows you to treat network devices as classes
++	  and distribute bandwidth among them. Iptables is used to specify
++	  through which IMQ device, if any, packets travel.
++
++	  More information at: http://www.linuximq.net/
++
++	  To compile this driver as a module, choose M here: the module
++	  will be called imq.  If unsure, say N.
++
++choice
++	prompt "IMQ behavior (PRE/POSTROUTING)"
++	depends on IMQ
++	default IMQ_BEHAVIOR_AB
++	help
++
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		IMQ can work in any of the following ways:
++
++		    PREROUTING   |      POSTROUTING
++		-----------------|-------------------
++		#1  After NAT    |      After NAT
++		#2  After NAT    |      Before NAT
++		#3  Before NAT   |      After NAT
++		#4  Before NAT   |      Before NAT
++
++		The default behavior is to hook before NAT on PREROUTING
++		and after NAT on POSTROUTING (#3).
++
++		This settings are specially usefull when trying to use IMQ
++		to shape NATed clients.
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_AA
++	bool "IMQ AA"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   After NAT
++		POSTROUTING:  After NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_AB
++	bool "IMQ AB"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   After NAT
++		POSTROUTING:  Before NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_BA
++	bool "IMQ BA"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   Before NAT
++		POSTROUTING:  After NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_BB
++	bool "IMQ BB"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   Before NAT
++		POSTROUTING:  Before NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++endchoice
++
++config IMQ_NUM_DEVS
++
++	int "Number of IMQ devices"
++	range 2 16
++	depends on IMQ
++	default "16"
++	help
++
++		This settings defines how many IMQ devices will be
++		created.
++
++		The default value is 16.
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
+ config TUN
+ 	tristate "Universal TUN/TAP device driver support"
+ 	select CRC32
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -165,6 +165,7 @@ obj-$(CONFIG_SLHC) += slhc.o
+ obj-$(CONFIG_XEN_NETDEV_FRONTEND) += xen-netfront.o
+ 
+ obj-$(CONFIG_DUMMY) += dummy.o
++obj-$(CONFIG_IMQ) += imq.o
+ obj-$(CONFIG_IFB) += ifb.o
+ obj-$(CONFIG_MACVLAN) += macvlan.o
+ obj-$(CONFIG_DE600) += de600.o
+--- /dev/null
++++ b/include/linux/imq.h
+@@ -0,0 +1,13 @@
++#ifndef _IMQ_H
++#define _IMQ_H
++
++/* IFMASK (16 device indexes, 0 to 15) and flag(s) fit in 5 bits */
++#define IMQ_F_BITS	5
++
++#define IMQ_F_IFMASK	0x0f
++#define IMQ_F_ENQUEUE	0x10
++
++#define IMQ_MAX_DEVS	(IMQ_F_IFMASK + 1)
++
++#endif /* _IMQ_H */
++
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -1168,6 +1168,7 @@ extern int		dev_alloc_name(struct net_de
+ extern int		dev_open(struct net_device *dev);
+ extern int		dev_close(struct net_device *dev);
+ extern void		dev_disable_lro(struct net_device *dev);
++extern struct netdev_queue *dev_pick_tx(struct net_device *dev, struct sk_buff *skb);
+ extern int		dev_queue_xmit(struct sk_buff *skb);
+ extern int		register_netdevice(struct net_device *dev);
+ extern void		unregister_netdevice_queue(struct net_device *dev,
+--- /dev/null
++++ b/include/linux/netfilter/xt_IMQ.h
+@@ -0,0 +1,9 @@
++#ifndef _XT_IMQ_H
++#define _XT_IMQ_H
++
++struct xt_imq_info {
++	unsigned int todev;     /* target imq device */
++};
++
++#endif /* _XT_IMQ_H */
++
+--- /dev/null
++++ b/include/linux/netfilter_ipv4/ipt_IMQ.h
+@@ -0,0 +1,10 @@
++#ifndef _IPT_IMQ_H
++#define _IPT_IMQ_H
++
++/* Backwards compatibility for old userspace */
++#include <linux/netfilter/xt_IMQ.h>
++
++#define ipt_imq_info xt_imq_info
++
++#endif /* _IPT_IMQ_H */
++
+--- /dev/null
++++ b/include/linux/netfilter_ipv6/ip6t_IMQ.h
+@@ -0,0 +1,10 @@
++#ifndef _IP6T_IMQ_H
++#define _IP6T_IMQ_H
++
++/* Backwards compatibility for old userspace */
++#include <linux/netfilter/xt_IMQ.h>
++
++#define ip6t_imq_info xt_imq_info
++
++#endif /* _IP6T_IMQ_H */
++
+--- a/include/linux/skbuff.h
++++ b/include/linux/skbuff.h
+@@ -29,6 +29,9 @@
+ #include <linux/rcupdate.h>
+ #include <linux/dmaengine.h>
+ #include <linux/hrtimer.h>
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++#include <linux/imq.h>
++#endif
+ 
+ /* Don't change this without changing skb_csum_unnecessary! */
+ #define CHECKSUM_NONE 0
+@@ -323,6 +326,10 @@ struct sk_buff {
+ 	char			cb[48] __aligned(8);
+ 
+ 	unsigned long		_skb_dst;
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	void			*cb_next;
++#endif
++
+ #ifdef CONFIG_XFRM
+ 	struct	sec_path	*sp;
+ #endif
+@@ -357,6 +364,9 @@ struct sk_buff {
+ 	struct nf_conntrack	*nfct;
+ 	struct sk_buff		*nfct_reasm;
+ #endif
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	struct nf_queue_entry	*nf_queue_entry;
++#endif
+ #ifdef CONFIG_BRIDGE_NETFILTER
+ 	struct nf_bridge_info	*nf_bridge;
+ #endif
+@@ -378,6 +388,10 @@ struct sk_buff {
+ 
+ 	/* 0/14 bit hole */
+ 
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	__u8			imq_flags:IMQ_F_BITS;
++#endif
++
+ #ifdef CONFIG_NET_DMA
+ 	dma_cookie_t		dma_cookie;
+ #endif
+@@ -426,6 +440,12 @@ static inline struct rtable *skb_rtable(
+ 	return (struct rtable *)skb_dst(skb);
+ }
+ 
++
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++extern int skb_save_cb(struct sk_buff *skb);
++extern int skb_restore_cb(struct sk_buff *skb);
++#endif
++
+ extern void kfree_skb(struct sk_buff *skb);
+ extern void consume_skb(struct sk_buff *skb);
+ extern void	       __kfree_skb(struct sk_buff *skb);
+@@ -1970,6 +1990,10 @@ static inline void __nf_copy(struct sk_b
+ 	dst->nfct_reasm = src->nfct_reasm;
+ 	nf_conntrack_get_reasm(src->nfct_reasm);
+ #endif
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	dst->imq_flags = src->imq_flags;
++	dst->nf_queue_entry = src->nf_queue_entry;
++#endif
+ #ifdef CONFIG_BRIDGE_NETFILTER
+ 	dst->nf_bridge  = src->nf_bridge;
+ 	nf_bridge_get(src->nf_bridge);
+--- a/include/net/netfilter/nf_queue.h
++++ b/include/net/netfilter/nf_queue.h
+@@ -13,6 +13,12 @@ struct nf_queue_entry {
+ 	struct net_device	*indev;
+ 	struct net_device	*outdev;
+ 	int			(*okfn)(struct sk_buff *);
++
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	int			(*next_outfn)(struct nf_queue_entry *entry,
++					      unsigned int queuenum);
++	unsigned int		next_queuenum;
++#endif
+ };
+ 
+ #define nf_queue_entry_reroute(x) ((void *)x + sizeof(struct nf_queue_entry))
+@@ -30,5 +36,11 @@ extern int nf_unregister_queue_handler(u
+ 				       const struct nf_queue_handler *qh);
+ extern void nf_unregister_queue_handlers(const struct nf_queue_handler *qh);
+ extern void nf_reinject(struct nf_queue_entry *entry, unsigned int verdict);
++extern void nf_queue_entry_release_refs(struct nf_queue_entry *entry);
++
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++extern void nf_register_queue_imq_handler(const struct nf_queue_handler *qh);
++extern void nf_unregister_queue_imq_handler(void);
++#endif
+ 
+ #endif /* _NF_QUEUE_H */
+--- a/net/core/dev.c
++++ b/net/core/dev.c
+@@ -97,6 +97,9 @@
+ #include <net/net_namespace.h>
+ #include <net/sock.h>
+ #include <linux/rtnetlink.h>
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++#include <linux/imq.h>
++#endif
+ #include <linux/proc_fs.h>
+ #include <linux/seq_file.h>
+ #include <linux/stat.h>
+@@ -1810,7 +1813,11 @@ int dev_hard_start_xmit(struct sk_buff *
+ 	int rc = NETDEV_TX_OK;
+ 
+ 	if (likely(!skb->next)) {
+-		if (!list_empty(&ptype_all))
++		if (!list_empty(&ptype_all)
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++		    && !(skb->imq_flags & IMQ_F_ENQUEUE)
++#endif
++		    )
+ 			dev_queue_xmit_nit(skb, dev);
+ 
+ 		if (netif_needs_gso(dev, skb)) {
+@@ -1912,8 +1919,7 @@ static inline u16 dev_cap_txqueue(struct
+ 	return queue_index;
+ }
+ 
+-static struct netdev_queue *dev_pick_tx(struct net_device *dev,
+-					struct sk_buff *skb)
++struct netdev_queue *dev_pick_tx(struct net_device *dev, struct sk_buff *skb)
+ {
+ 	u16 queue_index;
+ 	struct sock *sk = skb->sk;
+@@ -1939,6 +1945,7 @@ static struct netdev_queue *dev_pick_tx(
+ 	skb_set_queue_mapping(skb, queue_index);
+ 	return netdev_get_tx_queue(dev, queue_index);
+ }
++EXPORT_SYMBOL(dev_pick_tx);
+ 
+ static inline int __dev_xmit_skb(struct sk_buff *skb, struct Qdisc *q,
+ 				 struct net_device *dev,
+--- a/net/core/skbuff.c
++++ b/net/core/skbuff.c
+@@ -72,6 +72,9 @@
+ 
+ static struct kmem_cache *skbuff_head_cache __read_mostly;
+ static struct kmem_cache *skbuff_fclone_cache __read_mostly;
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++static struct kmem_cache *skbuff_cb_store_cache __read_mostly;
++#endif
+ 
+ static void sock_pipe_buf_release(struct pipe_inode_info *pipe,
+ 				  struct pipe_buffer *buf)
+@@ -91,6 +94,83 @@ static int sock_pipe_buf_steal(struct pi
+ 	return 1;
+ }
+ 
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++/* Control buffer save/restore for IMQ devices */
++struct skb_cb_table {
++	void			*cb_next;
++	atomic_t		refcnt;
++	char      		cb[48];
++};
++
++static DEFINE_SPINLOCK(skb_cb_store_lock);
++
++int skb_save_cb(struct sk_buff *skb)
++{
++	struct skb_cb_table *next;
++
++	next = kmem_cache_alloc(skbuff_cb_store_cache, GFP_ATOMIC);
++	if (!next)
++		return -ENOMEM;
++
++	BUILD_BUG_ON(sizeof(skb->cb) != sizeof(next->cb));
++
++	memcpy(next->cb, skb->cb, sizeof(skb->cb));
++	next->cb_next = skb->cb_next;
++
++	atomic_set(&next->refcnt, 1);
++
++	skb->cb_next = next;
++	return 0;
++}
++EXPORT_SYMBOL(skb_save_cb);
++
++int skb_restore_cb(struct sk_buff *skb)
++{
++	struct skb_cb_table *next;
++
++	if (!skb->cb_next)
++		return 0;
++
++	next = skb->cb_next;
++
++	BUILD_BUG_ON(sizeof(skb->cb) != sizeof(next->cb));
++
++	memcpy(skb->cb, next->cb, sizeof(skb->cb));
++	skb->cb_next = next->cb_next;
++
++	spin_lock(&skb_cb_store_lock);
++
++	if (atomic_dec_and_test(&next->refcnt)) {
++		kmem_cache_free(skbuff_cb_store_cache, next);
++	}
++
++	spin_unlock(&skb_cb_store_lock);
++
++	return 0;
++}
++EXPORT_SYMBOL(skb_restore_cb);
++
++static void skb_copy_stored_cb(struct sk_buff *new, const struct sk_buff *__old)
++{
++	struct skb_cb_table *next;
++	struct sk_buff *old;
++
++	if (!__old->cb_next) {
++		new->cb_next = NULL;
++		return;
++	}
++
++	spin_lock(&skb_cb_store_lock);
++
++	old = (struct sk_buff *)__old;
++
++	next = old->cb_next;
++	atomic_inc(&next->refcnt);
++	new->cb_next = next;
++
++	spin_unlock(&skb_cb_store_lock);
++}
++#endif
+ 
+ /* Pipe buffer operations for a socket. */
+ static const struct pipe_buf_operations sock_pipe_buf_ops = {
+@@ -398,6 +478,26 @@ static void skb_release_head_state(struc
+ 		WARN_ON(in_irq());
+ 		skb->destructor(skb);
+ 	}
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	/* This should not happen. When it does, avoid memleak by restoring
++	the chain of cb-backups. */
++	while(skb->cb_next != NULL) {
++		if (net_ratelimit())
++			printk(KERN_WARNING "IMQ: kfree_skb: skb->cb_next: "
++				"%08x\n", (unsigned int)skb->cb_next);
++
++		skb_restore_cb(skb);
++	}
++	/* This should not happen either, nf_queue_entry is nullified in
++	 * imq_dev_xmit(). If we have non-NULL nf_queue_entry then we are
++	 * leaking entry pointers, maybe memory. We don't know if this is
++	 * pointer to already freed memory, or should this be freed.
++	 * If this happens we need to add refcounting, etc for nf_queue_entry.
++	 */
++	if (skb->nf_queue_entry && net_ratelimit())
++		printk(KERN_WARNING
++				"IMQ: kfree_skb: skb->nf_queue_entry != NULL");
++#endif
+ #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
+ 	nf_conntrack_put(skb->nfct);
+ 	nf_conntrack_put_reasm(skb->nfct_reasm);
+@@ -538,6 +638,9 @@ static void __copy_skb_header(struct sk_
+ 	new->sp			= secpath_get(old->sp);
+ #endif
+ 	memcpy(new->cb, old->cb, sizeof(old->cb));
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	skb_copy_stored_cb(new, old);
++#endif
+ 	new->csum		= old->csum;
+ 	new->local_df		= old->local_df;
+ 	new->pkt_type		= old->pkt_type;
+@@ -2779,6 +2882,13 @@ void __init skb_init(void)
+ 						0,
+ 						SLAB_HWCACHE_ALIGN|SLAB_PANIC,
+ 						NULL);
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	skbuff_cb_store_cache = kmem_cache_create("skbuff_cb_store_cache",
++						  sizeof(struct skb_cb_table),
++						  0,
++						  SLAB_HWCACHE_ALIGN|SLAB_PANIC,
++						  NULL);
++#endif
+ }
+ 
+ /**
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -396,6 +396,18 @@ config NETFILTER_XT_TARGET_LED
+ 	  For more information on the LEDs available on your system, see
+ 	  Documentation/leds-class.txt
+ 
++config NETFILTER_XT_TARGET_IMQ
++        tristate '"IMQ" target support'
++	depends on NETFILTER_XTABLES
++	depends on IP_NF_MANGLE || IP6_NF_MANGLE
++	select IMQ
++	default m if NETFILTER_ADVANCED=n
++        help
++          This option adds a `IMQ' target which is used to specify if and
++          to which imq device packets should get enqueued/dequeued.
++
++          To compile it as a module, choose M here.  If unsure, say N.
++
+ config NETFILTER_XT_TARGET_MARK
+ 	tristate '"MARK" target support'
+ 	default m if NETFILTER_ADVANCED=n
+--- a/net/netfilter/Makefile
++++ b/net/netfilter/Makefile
+@@ -46,6 +46,7 @@ obj-$(CONFIG_NETFILTER_XT_TARGET_CONNMAR
+ obj-$(CONFIG_NETFILTER_XT_TARGET_CONNSECMARK) += xt_CONNSECMARK.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_DSCP) += xt_DSCP.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_HL) += xt_HL.o
++obj-$(CONFIG_NETFILTER_XT_TARGET_IMQ) += xt_IMQ.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_LED) += xt_LED.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_MARK) += xt_MARK.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_NFLOG) += xt_NFLOG.o
+--- a/net/netfilter/nf_queue.c
++++ b/net/netfilter/nf_queue.c
+@@ -20,6 +20,26 @@ static const struct nf_queue_handler *qu
+ 
+ static DEFINE_MUTEX(queue_handler_mutex);
+ 
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++static const struct nf_queue_handler *queue_imq_handler;
++
++void nf_register_queue_imq_handler(const struct nf_queue_handler *qh)
++{
++	mutex_lock(&queue_handler_mutex);
++	rcu_assign_pointer(queue_imq_handler, qh);
++	mutex_unlock(&queue_handler_mutex);
++}
++EXPORT_SYMBOL(nf_register_queue_imq_handler);
++
++void nf_unregister_queue_imq_handler(void)
++{
++	mutex_lock(&queue_handler_mutex);
++	rcu_assign_pointer(queue_imq_handler, NULL);
++	mutex_unlock(&queue_handler_mutex);
++}
++EXPORT_SYMBOL(nf_unregister_queue_imq_handler);
++#endif
++
+ /* return EBUSY when somebody else is registered, return EEXIST if the
+  * same handler is registered, return 0 in case of success. */
+ int nf_register_queue_handler(u_int8_t pf, const struct nf_queue_handler *qh)
+@@ -80,7 +100,7 @@ void nf_unregister_queue_handlers(const 
+ }
+ EXPORT_SYMBOL_GPL(nf_unregister_queue_handlers);
+ 
+-static void nf_queue_entry_release_refs(struct nf_queue_entry *entry)
++void nf_queue_entry_release_refs(struct nf_queue_entry *entry)
+ {
+ 	/* Release those devices we held, or Alexey will kill me. */
+ 	if (entry->indev)
+@@ -100,6 +120,7 @@ static void nf_queue_entry_release_refs(
+ 	/* Drop reference to owner of hook which queued us. */
+ 	module_put(entry->elem->owner);
+ }
++EXPORT_SYMBOL_GPL(nf_queue_entry_release_refs);
+ 
+ /*
+  * Any packet that leaves via this function must come back
+@@ -121,12 +142,26 @@ static int __nf_queue(struct sk_buff *sk
+ #endif
+ 	const struct nf_afinfo *afinfo;
+ 	const struct nf_queue_handler *qh;
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	const struct nf_queue_handler *qih = NULL;
++#endif
+ 
+ 	/* QUEUE == DROP if noone is waiting, to be safe. */
+ 	rcu_read_lock();
+ 
+ 	qh = rcu_dereference(queue_handler[pf]);
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++	if (pf == PF_INET || pf == PF_INET6)
++#else
++	if (pf == PF_INET)
++#endif
++		qih = rcu_dereference(queue_imq_handler);
++
++	if (!qh && !qih)
++#else /* !IMQ */
+ 	if (!qh)
++#endif
+ 		goto err_unlock;
+ 
+ 	afinfo = nf_get_afinfo(pf);
+@@ -145,6 +180,10 @@ static int __nf_queue(struct sk_buff *sk
+ 		.indev	= indev,
+ 		.outdev	= outdev,
+ 		.okfn	= okfn,
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++		.next_outfn = qh ? qh->outfn : NULL,
++		.next_queuenum = queuenum,
++#endif
+ 	};
+ 
+ 	/* If it's going away, ignore hook. */
+@@ -170,8 +209,19 @@ static int __nf_queue(struct sk_buff *sk
+ 	}
+ #endif
+ 	afinfo->saveroute(skb, entry);
++
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	if (qih) {
++		status = qih->outfn(entry, queuenum);
++		goto imq_skip_queue;
++	}
++#endif
++
+ 	status = qh->outfn(entry, queuenum);
+ 
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++imq_skip_queue:
++#endif
+ 	rcu_read_unlock();
+ 
+ 	if (status < 0) {
+--- /dev/null
++++ b/net/netfilter/xt_IMQ.c
+@@ -0,0 +1,73 @@
++/*
++ * This target marks packets to be enqueued to an imq device
++ */
++#include <linux/module.h>
++#include <linux/skbuff.h>
++#include <linux/netfilter/x_tables.h>
++#include <linux/netfilter/xt_IMQ.h>
++#include <linux/imq.h>
++
++static unsigned int imq_target(struct sk_buff *pskb,
++				const struct xt_target_param *par)
++{
++	const struct xt_imq_info *mr = par->targinfo;
++
++	pskb->imq_flags = (mr->todev & IMQ_F_IFMASK) | IMQ_F_ENQUEUE;
++
++	return XT_CONTINUE;
++}
++
++static bool imq_checkentry(const struct xt_tgchk_param *par)
++{
++	struct xt_imq_info *mr = par->targinfo;
++
++	if (mr->todev > IMQ_MAX_DEVS - 1) {
++		printk(KERN_WARNING
++		       "IMQ: invalid device specified, highest is %u\n",
++		       IMQ_MAX_DEVS - 1);
++		return 0;
++	}
++
++	return 1;
++}
++
++static struct xt_target xt_imq_reg[] __read_mostly = {
++	{
++		.name           = "IMQ",
++		.family		= AF_INET,
++		.checkentry     = imq_checkentry,
++		.target         = imq_target,
++		.targetsize	= sizeof(struct xt_imq_info),
++		.table		= "mangle",
++		.me             = THIS_MODULE
++	},
++	{
++		.name           = "IMQ",
++		.family		= AF_INET6,
++		.checkentry     = imq_checkentry,
++		.target         = imq_target,
++		.targetsize	= sizeof(struct xt_imq_info),
++		.table		= "mangle",
++		.me             = THIS_MODULE
++	},
++};
++
++static int __init imq_init(void)
++{
++	return xt_register_targets(xt_imq_reg, ARRAY_SIZE(xt_imq_reg));
++}
++
++static void __exit imq_fini(void)
++{
++	xt_unregister_targets(xt_imq_reg, ARRAY_SIZE(xt_imq_reg));
++}
++
++module_init(imq_init);
++module_exit(imq_fini);
++
++MODULE_AUTHOR("http://www.linuximq.net");
++MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See http://www.linuximq.net/ for more information.");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("ipt_IMQ");
++MODULE_ALIAS("ip6t_IMQ");
++
diff --git a/target/linux/generic/patches-2.6.33/180-netfilter_depends.patch b/target/linux/generic/patches-2.6.33/180-netfilter_depends.patch
new file mode 100644
index 0000000000..fc00d159c3
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/180-netfilter_depends.patch
@@ -0,0 +1,18 @@
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -160,7 +160,6 @@ config NF_CONNTRACK_FTP
+ 
+ config NF_CONNTRACK_H323
+ 	tristate "H.323 protocol support"
+-	depends on (IPV6 || IPV6=n)
+ 	depends on NETFILTER_ADVANCED
+ 	help
+ 	  H.323 is a VoIP signalling protocol from ITU-T. As one of the most
+@@ -505,7 +504,6 @@ config NETFILTER_XT_TARGET_SECMARK
+ 
+ config NETFILTER_XT_TARGET_TCPMSS
+ 	tristate '"TCPMSS" target support'
+-	depends on (IPV6 || IPV6=n)
+ 	default m if NETFILTER_ADVANCED=n
+ 	---help---
+ 	  This option adds a `TCPMSS' target, which allows you to alter the
diff --git a/target/linux/generic/patches-2.6.33/190-netfilter_rtsp.patch b/target/linux/generic/patches-2.6.33/190-netfilter_rtsp.patch
new file mode 100644
index 0000000000..29e82084ca
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/190-netfilter_rtsp.patch
@@ -0,0 +1,1366 @@
+--- /dev/null
++++ b/include/linux/netfilter/nf_conntrack_rtsp.h
+@@ -0,0 +1,63 @@
++/*
++ * RTSP extension for IP connection tracking.
++ * (C) 2003 by Tom Marshall <tmarshall at real.com>
++ * based on ip_conntrack_irc.h
++ *
++ *      This program is free software; you can redistribute it and/or
++ *      modify it under the terms of the GNU General Public License
++ *      as published by the Free Software Foundation; either version
++ *      2 of the License, or (at your option) any later version.
++ */
++#ifndef _IP_CONNTRACK_RTSP_H
++#define _IP_CONNTRACK_RTSP_H
++
++//#define IP_NF_RTSP_DEBUG 1
++#define IP_NF_RTSP_VERSION "0.6.21"
++
++#ifdef __KERNEL__
++/* port block types */
++typedef enum {
++    pb_single,  /* client_port=x */
++    pb_range,   /* client_port=x-y */
++    pb_discon   /* client_port=x/y (rtspbis) */
++} portblock_t;
++
++/* We record seq number and length of rtsp headers here, all in host order. */
++
++/*
++ * This structure is per expected connection.  It is a member of struct
++ * ip_conntrack_expect.  The TCP SEQ for the conntrack expect is stored
++ * there and we are expected to only store the length of the data which
++ * needs replaced.  If a packet contains multiple RTSP messages, we create
++ * one expected connection per message.
++ *
++ * We use these variables to mark the entire header block.  This may seem
++ * like overkill, but the nature of RTSP requires it.  A header may appear
++ * multiple times in a message.  We must treat two Transport headers the
++ * same as one Transport header with two entries.
++ */
++struct ip_ct_rtsp_expect
++{
++    u_int32_t   len;        /* length of header block */
++    portblock_t pbtype;     /* Type of port block that was requested */
++    u_int16_t   loport;     /* Port that was requested, low or first */
++    u_int16_t   hiport;     /* Port that was requested, high or second */
++#if 0
++    uint        method;     /* RTSP method */
++    uint        cseq;       /* CSeq from request */
++#endif
++};
++
++extern unsigned int (*nf_nat_rtsp_hook)(struct sk_buff *skb,
++				 enum ip_conntrack_info ctinfo,
++				 unsigned int matchoff, unsigned int matchlen,
++				 struct ip_ct_rtsp_expect *prtspexp,
++				 struct nf_conntrack_expect *exp);
++
++extern void (*nf_nat_rtsp_hook_expectfn)(struct nf_conn *ct, struct nf_conntrack_expect *exp);
++
++#define RTSP_PORT   554
++
++#endif /* __KERNEL__ */
++
++#endif /* _IP_CONNTRACK_RTSP_H */
+--- /dev/null
++++ b/include/linux/netfilter_helpers.h
+@@ -0,0 +1,133 @@
++/*
++ * Helpers for netfiler modules.  This file provides implementations for basic
++ * functions such as strncasecmp(), etc.
++ *
++ * gcc will warn for defined but unused functions, so we only include the
++ * functions requested.  The following macros are used:
++ *   NF_NEED_STRNCASECMP        nf_strncasecmp()
++ *   NF_NEED_STRTOU16           nf_strtou16()
++ *   NF_NEED_STRTOU32           nf_strtou32()
++ */
++#ifndef _NETFILTER_HELPERS_H
++#define _NETFILTER_HELPERS_H
++
++/* Only include these functions for kernel code. */
++#ifdef __KERNEL__
++
++#include <linux/ctype.h>
++#define iseol(c) ( (c) == '\r' || (c) == '\n' )
++
++/*
++ * The standard strncasecmp()
++ */
++#ifdef NF_NEED_STRNCASECMP
++static int
++nf_strncasecmp(const char* s1, const char* s2, u_int32_t len)
++{
++    if (s1 == NULL || s2 == NULL)
++    {
++        if (s1 == NULL && s2 == NULL)
++        {
++            return 0;
++        }
++        return (s1 == NULL) ? -1 : 1;
++    }
++    while (len > 0 && tolower(*s1) == tolower(*s2))
++    {
++        len--;
++        s1++;
++        s2++;
++    }
++    return ( (len == 0) ? 0 : (tolower(*s1) - tolower(*s2)) );
++}
++#endif /* NF_NEED_STRNCASECMP */
++
++/*
++ * Parse a string containing a 16-bit unsigned integer.
++ * Returns the number of chars used, or zero if no number is found.
++ */
++#ifdef NF_NEED_STRTOU16
++static int
++nf_strtou16(const char* pbuf, u_int16_t* pval)
++{
++    int n = 0;
++
++    *pval = 0;
++    while (isdigit(pbuf[n]))
++    {
++        *pval = (*pval * 10) + (pbuf[n] - '0');
++        n++;
++    }
++
++    return n;
++}
++#endif /* NF_NEED_STRTOU16 */
++
++/*
++ * Parse a string containing a 32-bit unsigned integer.
++ * Returns the number of chars used, or zero if no number is found.
++ */
++#ifdef NF_NEED_STRTOU32
++static int
++nf_strtou32(const char* pbuf, u_int32_t* pval)
++{
++    int n = 0;
++
++    *pval = 0;
++    while (pbuf[n] >= '0' && pbuf[n] <= '9')
++    {
++        *pval = (*pval * 10) + (pbuf[n] - '0');
++        n++;
++    }
++
++    return n;
++}
++#endif /* NF_NEED_STRTOU32 */
++
++/*
++ * Given a buffer and length, advance to the next line and mark the current
++ * line.
++ */
++#ifdef NF_NEED_NEXTLINE
++static int
++nf_nextline(char* p, uint len, uint* poff, uint* plineoff, uint* plinelen)
++{
++    uint    off = *poff;
++    uint    physlen = 0;
++
++    if (off >= len)
++    {
++        return 0;
++    }
++
++    while (p[off] != '\n')
++    {
++        if (len-off <= 1)
++        {
++            return 0;
++        }
++
++        physlen++;
++        off++;
++    }
++
++    /* if we saw a crlf, physlen needs adjusted */
++    if (physlen > 0 && p[off] == '\n' && p[off-1] == '\r')
++    {
++        physlen--;
++    }
++
++    /* advance past the newline */
++    off++;
++
++    *plineoff = *poff;
++    *plinelen = physlen;
++    *poff = off;
++
++    return 1;
++}
++#endif /* NF_NEED_NEXTLINE */
++
++#endif /* __KERNEL__ */
++
++#endif /* _NETFILTER_HELPERS_H */
+--- /dev/null
++++ b/include/linux/netfilter_mime.h
+@@ -0,0 +1,89 @@
++/*
++ * MIME functions for netfilter modules.  This file provides implementations
++ * for basic MIME parsing.  MIME headers are used in many protocols, such as
++ * HTTP, RTSP, SIP, etc.
++ *
++ * gcc will warn for defined but unused functions, so we only include the
++ * functions requested.  The following macros are used:
++ *   NF_NEED_MIME_NEXTLINE      nf_mime_nextline()
++ */
++#ifndef _NETFILTER_MIME_H
++#define _NETFILTER_MIME_H
++
++/* Only include these functions for kernel code. */
++#ifdef __KERNEL__
++
++#include <linux/ctype.h>
++
++/*
++ * Given a buffer and length, advance to the next line and mark the current
++ * line.  If the current line is empty, *plinelen will be set to zero.  If
++ * not, it will be set to the actual line length (including CRLF).
++ *
++ * 'line' in this context means logical line (includes LWS continuations).
++ * Returns 1 on success, 0 on failure.
++ */
++#ifdef NF_NEED_MIME_NEXTLINE
++static int
++nf_mime_nextline(char* p, uint len, uint* poff, uint* plineoff, uint* plinelen)
++{
++    uint    off = *poff;
++    uint    physlen = 0;
++    int     is_first_line = 1;
++
++    if (off >= len)
++    {
++        return 0;
++    }
++
++    do
++    {
++        while (p[off] != '\n')
++        {
++            if (len-off <= 1)
++            {
++                return 0;
++            }
++
++            physlen++;
++            off++;
++        }
++
++        /* if we saw a crlf, physlen needs adjusted */
++        if (physlen > 0 && p[off] == '\n' && p[off-1] == '\r')
++        {
++            physlen--;
++        }
++
++        /* advance past the newline */
++        off++;
++
++        /* check for an empty line */
++        if (physlen == 0)
++        {
++            break;
++        }
++
++        /* check for colon on the first physical line */
++        if (is_first_line)
++        {
++            is_first_line = 0;
++            if (memchr(p+(*poff), ':', physlen) == NULL)
++            {
++                return 0;
++            }
++        }
++    }
++    while (p[off] == ' ' || p[off] == '\t');
++
++    *plineoff = *poff;
++    *plinelen = (physlen == 0) ? 0 : (off - *poff);
++    *poff = off;
++
++    return 1;
++}
++#endif /* NF_NEED_MIME_NEXTLINE */
++
++#endif /* __KERNEL__ */
++
++#endif /* _NETFILTER_MIME_H */
+--- a/net/ipv4/netfilter/Makefile
++++ b/net/ipv4/netfilter/Makefile
+@@ -26,6 +26,7 @@ obj-$(CONFIG_NF_NAT_AMANDA) += nf_nat_am
+ obj-$(CONFIG_NF_NAT_FTP) += nf_nat_ftp.o
+ obj-$(CONFIG_NF_NAT_H323) += nf_nat_h323.o
+ obj-$(CONFIG_NF_NAT_IRC) += nf_nat_irc.o
++obj-$(CONFIG_NF_NAT_RTSP) += nf_nat_rtsp.o
+ obj-$(CONFIG_NF_NAT_PPTP) += nf_nat_pptp.o
+ obj-$(CONFIG_NF_NAT_SIP) += nf_nat_sip.o
+ obj-$(CONFIG_NF_NAT_SNMP_BASIC) += nf_nat_snmp_basic.o
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -267,6 +267,16 @@ config NF_CONNTRACK_TFTP
+ 
+ 	  To compile it as a module, choose M here.  If unsure, say N.
+ 
++config NF_CONNTRACK_RTSP
++	tristate "RTSP protocol support"
++	depends on NF_CONNTRACK
++	help
++		Support the RTSP protocol.  This allows UDP transports to be setup
++		properly, including RTP and RDT.
++
++		If you want to compile it as a module, say 'M' here and read
++		Documentation/modules.txt.  If unsure, say 'Y'.
++
+ config NF_CT_NETLINK
+ 	tristate 'Connection tracking netlink interface'
+ 	select NETFILTER_NETLINK
+--- a/net/netfilter/Makefile
++++ b/net/netfilter/Makefile
+@@ -33,6 +33,7 @@ obj-$(CONFIG_NF_CONNTRACK_PPTP) += nf_co
+ obj-$(CONFIG_NF_CONNTRACK_SANE) += nf_conntrack_sane.o
+ obj-$(CONFIG_NF_CONNTRACK_SIP) += nf_conntrack_sip.o
+ obj-$(CONFIG_NF_CONNTRACK_TFTP) += nf_conntrack_tftp.o
++obj-$(CONFIG_NF_CONNTRACK_RTSP) += nf_conntrack_rtsp.o
+ 
+ # transparent proxy support
+ obj-$(CONFIG_NETFILTER_TPROXY) += nf_tproxy_core.o
+--- a/net/ipv4/netfilter/Kconfig
++++ b/net/ipv4/netfilter/Kconfig
+@@ -257,6 +257,11 @@ config NF_NAT_IRC
+ 	depends on NF_CONNTRACK && NF_NAT
+ 	default NF_NAT && NF_CONNTRACK_IRC
+ 
++config NF_NAT_RTSP
++	tristate
++ 	depends on IP_NF_IPTABLES && NF_CONNTRACK && NF_NAT
++ 	default NF_NAT && NF_CONNTRACK_RTSP
++
+ config NF_NAT_TFTP
+ 	tristate
+ 	depends on NF_CONNTRACK && NF_NAT
+--- /dev/null
++++ b/net/netfilter/nf_conntrack_rtsp.c
+@@ -0,0 +1,517 @@
++/*
++ * RTSP extension for IP connection tracking
++ * (C) 2003 by Tom Marshall <tmarshall at real.com>
++ * based on ip_conntrack_irc.c
++ *
++ *      This program is free software; you can redistribute it and/or
++ *      modify it under the terms of the GNU General Public License
++ *      as published by the Free Software Foundation; either version
++ *      2 of the License, or (at your option) any later version.
++ *
++ * Module load syntax:
++ *   insmod nf_conntrack_rtsp.o ports=port1,port2,...port<MAX_PORTS>
++ *                              max_outstanding=n setup_timeout=secs
++ *
++ * If no ports are specified, the default will be port 554.
++ *
++ * With max_outstanding you can define the maximum number of not yet
++ * answered SETUP requests per RTSP session (default 8).
++ * With setup_timeout you can specify how long the system waits for
++ * an expected data channel (default 300 seconds).
++ *
++ * 2005-02-13: Harald Welte <laforge at netfilter.org>
++ * 	- port to 2.6
++ * 	- update to recent post-2.6.11 api changes
++ * 2006-09-14: Steven Van Acker <deepstar at singularity.be>
++ *      - removed calls to NAT code from conntrack helper: NAT no longer needed to use rtsp-conntrack
++ * 2007-04-18: Michael Guntsche <mike at it-loops.com>
++ * 			- Port to new NF API
++ */
++
++#include <linux/module.h>
++#include <linux/netfilter.h>
++#include <linux/ip.h>
++#include <linux/inet.h>
++#include <net/tcp.h>
++
++#include <net/netfilter/nf_conntrack.h>
++#include <net/netfilter/nf_conntrack_expect.h>
++#include <net/netfilter/nf_conntrack_helper.h>
++#include <linux/netfilter/nf_conntrack_rtsp.h>
++
++#define NF_NEED_STRNCASECMP
++#define NF_NEED_STRTOU16
++#define NF_NEED_STRTOU32
++#define NF_NEED_NEXTLINE
++#include <linux/netfilter_helpers.h>
++#define NF_NEED_MIME_NEXTLINE
++#include <linux/netfilter_mime.h>
++
++#include <linux/ctype.h>
++#define MAX_SIMUL_SETUP 8 /* XXX: use max_outstanding */
++#define INFOP(fmt, args...) printk(KERN_INFO "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
++#if 0
++#define DEBUGP(fmt, args...) printk(KERN_DEBUG "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
++#else
++#define DEBUGP(fmt, args...)
++#endif
++
++#define MAX_PORTS 8
++static int ports[MAX_PORTS];
++static int num_ports = 0;
++static int max_outstanding = 8;
++static unsigned int setup_timeout = 300;
++
++MODULE_AUTHOR("Tom Marshall <tmarshall at real.com>");
++MODULE_DESCRIPTION("RTSP connection tracking module");
++MODULE_LICENSE("GPL");
++module_param_array(ports, int, &num_ports, 0400);
++MODULE_PARM_DESC(ports, "port numbers of RTSP servers");
++module_param(max_outstanding, int, 0400);
++MODULE_PARM_DESC(max_outstanding, "max number of outstanding SETUP requests per RTSP session");
++module_param(setup_timeout, int, 0400);
++MODULE_PARM_DESC(setup_timeout, "timeout on for unestablished data channels");
++
++static char *rtsp_buffer;
++static DEFINE_SPINLOCK(rtsp_buffer_lock);
++
++unsigned int (*nf_nat_rtsp_hook)(struct sk_buff *skb,
++				 enum ip_conntrack_info ctinfo,
++				 unsigned int matchoff, unsigned int matchlen,struct ip_ct_rtsp_expect* prtspexp,
++				 struct nf_conntrack_expect *exp);
++void (*nf_nat_rtsp_hook_expectfn)(struct nf_conn *ct, struct nf_conntrack_expect *exp);
++
++EXPORT_SYMBOL_GPL(nf_nat_rtsp_hook);
++
++/*
++ * Max mappings we will allow for one RTSP connection (for RTP, the number
++ * of allocated ports is twice this value).  Note that SMIL burns a lot of
++ * ports so keep this reasonably high.  If this is too low, you will see a
++ * lot of "no free client map entries" messages.
++ */
++#define MAX_PORT_MAPS 16
++
++/*** default port list was here in the masq code: 554, 3030, 4040 ***/
++
++#define SKIP_WSPACE(ptr,len,off) while(off < len && isspace(*(ptr+off))) { off++; }
++
++/*
++ * Parse an RTSP packet.
++ *
++ * Returns zero if parsing failed.
++ *
++ * Parameters:
++ *  IN      ptcp        tcp data pointer
++ *  IN      tcplen      tcp data len
++ *  IN/OUT  ptcpoff     points to current tcp offset
++ *  OUT     phdrsoff    set to offset of rtsp headers
++ *  OUT     phdrslen    set to length of rtsp headers
++ *  OUT     pcseqoff    set to offset of CSeq header
++ *  OUT     pcseqlen    set to length of CSeq header
++ */
++static int
++rtsp_parse_message(char* ptcp, uint tcplen, uint* ptcpoff,
++                   uint* phdrsoff, uint* phdrslen,
++                   uint* pcseqoff, uint* pcseqlen,
++                   uint* transoff, uint* translen)
++{
++	uint    entitylen = 0;
++	uint    lineoff;
++	uint    linelen;
++
++	if (!nf_nextline(ptcp, tcplen, ptcpoff, &lineoff, &linelen))
++		return 0;
++
++	*phdrsoff = *ptcpoff;
++	while (nf_mime_nextline(ptcp, tcplen, ptcpoff, &lineoff, &linelen)) {
++		if (linelen == 0) {
++			if (entitylen > 0)
++				*ptcpoff += min(entitylen, tcplen - *ptcpoff);
++			break;
++		}
++		if (lineoff+linelen > tcplen) {
++			INFOP("!! overrun !!\n");
++			break;
++		}
++
++		if (nf_strncasecmp(ptcp+lineoff, "CSeq:", 5) == 0) {
++			*pcseqoff = lineoff;
++			*pcseqlen = linelen;
++		}
++
++		if (nf_strncasecmp(ptcp+lineoff, "Transport:", 10) == 0) {
++			*transoff = lineoff;
++			*translen = linelen;
++		}
++
++		if (nf_strncasecmp(ptcp+lineoff, "Content-Length:", 15) == 0) {
++			uint off = lineoff+15;
++			SKIP_WSPACE(ptcp+lineoff, linelen, off);
++			nf_strtou32(ptcp+off, &entitylen);
++		}
++	}
++	*phdrslen = (*ptcpoff) - (*phdrsoff);
++
++	return 1;
++}
++
++/*
++ * Find lo/hi client ports (if any) in transport header
++ * In:
++ *   ptcp, tcplen = packet
++ *   tranoff, tranlen = buffer to search
++ *
++ * Out:
++ *   pport_lo, pport_hi = lo/hi ports (host endian)
++ *
++ * Returns nonzero if any client ports found
++ *
++ * Note: it is valid (and expected) for the client to request multiple
++ * transports, so we need to parse the entire line.
++ */
++static int
++rtsp_parse_transport(char* ptran, uint tranlen,
++                     struct ip_ct_rtsp_expect* prtspexp)
++{
++	int     rc = 0;
++	uint    off = 0;
++
++	if (tranlen < 10 || !iseol(ptran[tranlen-1]) ||
++	    nf_strncasecmp(ptran, "Transport:", 10) != 0) {
++		INFOP("sanity check failed\n");
++		return 0;
++	}
++
++	DEBUGP("tran='%.*s'\n", (int)tranlen, ptran);
++	off += 10;
++	SKIP_WSPACE(ptran, tranlen, off);
++
++	/* Transport: tran;field;field=val,tran;field;field=val,... */
++	while (off < tranlen) {
++		const char* pparamend;
++		uint        nextparamoff;
++
++		pparamend = memchr(ptran+off, ',', tranlen-off);
++		pparamend = (pparamend == NULL) ? ptran+tranlen : pparamend+1;
++		nextparamoff = pparamend-ptran;
++
++		while (off < nextparamoff) {
++			const char* pfieldend;
++			uint        nextfieldoff;
++
++			pfieldend = memchr(ptran+off, ';', nextparamoff-off);
++			nextfieldoff = (pfieldend == NULL) ? nextparamoff : pfieldend-ptran+1;
++
++			if (strncmp(ptran+off, "client_port=", 12) == 0) {
++				u_int16_t   port;
++				uint        numlen;
++
++				off += 12;
++				numlen = nf_strtou16(ptran+off, &port);
++				off += numlen;
++				if (prtspexp->loport != 0 && prtspexp->loport != port)
++					DEBUGP("multiple ports found, port %hu ignored\n", port);
++				else {
++					DEBUGP("lo port found : %hu\n", port);
++					prtspexp->loport = prtspexp->hiport = port;
++					if (ptran[off] == '-') {
++						off++;
++						numlen = nf_strtou16(ptran+off, &port);
++						off += numlen;
++						prtspexp->pbtype = pb_range;
++						prtspexp->hiport = port;
++
++						// If we have a range, assume rtp:
++						// loport must be even, hiport must be loport+1
++						if ((prtspexp->loport & 0x0001) != 0 ||
++						    prtspexp->hiport != prtspexp->loport+1) {
++							DEBUGP("incorrect range: %hu-%hu, correcting\n",
++							       prtspexp->loport, prtspexp->hiport);
++							prtspexp->loport &= 0xfffe;
++							prtspexp->hiport = prtspexp->loport+1;
++						}
++					} else if (ptran[off] == '/') {
++						off++;
++						numlen = nf_strtou16(ptran+off, &port);
++						off += numlen;
++						prtspexp->pbtype = pb_discon;
++						prtspexp->hiport = port;
++					}
++					rc = 1;
++				}
++			}
++
++			/*
++			 * Note we don't look for the destination parameter here.
++			 * If we are using NAT, the NAT module will handle it.  If not,
++			 * and the client is sending packets elsewhere, the expectation
++			 * will quietly time out.
++			 */
++
++			off = nextfieldoff;
++		}
++
++		off = nextparamoff;
++	}
++
++	return rc;
++}
++
++void expected(struct nf_conn *ct, struct nf_conntrack_expect *exp)
++{
++    if(nf_nat_rtsp_hook_expectfn) {
++        nf_nat_rtsp_hook_expectfn(ct,exp);
++    }
++}
++
++/*** conntrack functions ***/
++
++/* outbound packet: client->server */
++
++static inline int
++help_out(struct sk_buff *skb, unsigned char *rb_ptr, unsigned int datalen,
++                struct nf_conn *ct, enum ip_conntrack_info ctinfo)
++{
++	struct ip_ct_rtsp_expect expinfo;
++
++	int dir = CTINFO2DIR(ctinfo);   /* = IP_CT_DIR_ORIGINAL */
++	//struct  tcphdr* tcph = (void*)iph + iph->ihl * 4;
++	//uint    tcplen = pktlen - iph->ihl * 4;
++	char*   pdata = rb_ptr;
++	//uint    datalen = tcplen - tcph->doff * 4;
++	uint    dataoff = 0;
++	int ret = NF_ACCEPT;
++
++	struct nf_conntrack_expect *exp;
++
++	__be16 be_loport;
++
++	memset(&expinfo, 0, sizeof(expinfo));
++
++	while (dataoff < datalen) {
++		uint    cmdoff = dataoff;
++		uint    hdrsoff = 0;
++		uint    hdrslen = 0;
++		uint    cseqoff = 0;
++		uint    cseqlen = 0;
++		uint    transoff = 0;
++		uint    translen = 0;
++		uint    off;
++
++		if (!rtsp_parse_message(pdata, datalen, &dataoff,
++					&hdrsoff, &hdrslen,
++					&cseqoff, &cseqlen,
++					&transoff, &translen))
++			break;      /* not a valid message */
++
++		if (strncmp(pdata+cmdoff, "SETUP ", 6) != 0)
++			continue;   /* not a SETUP message */
++		DEBUGP("found a setup message\n");
++
++		off = 0;
++		if(translen) {
++			rtsp_parse_transport(pdata+transoff, translen, &expinfo);
++		}
++
++		if (expinfo.loport == 0) {
++			DEBUGP("no udp transports found\n");
++			continue;   /* no udp transports found */
++		}
++
++		DEBUGP("udp transport found, ports=(%d,%hu,%hu)\n",
++		       (int)expinfo.pbtype, expinfo.loport, expinfo.hiport);
++
++		exp = nf_ct_expect_alloc(ct);
++		if (!exp) {
++			ret = NF_DROP;
++			goto out;
++		}
++
++		be_loport = htons(expinfo.loport);
++
++		nf_ct_expect_init(exp, NF_CT_EXPECT_CLASS_DEFAULT,
++			ct->tuplehash[!dir].tuple.src.l3num,
++			&ct->tuplehash[!dir].tuple.src.u3, &ct->tuplehash[!dir].tuple.dst.u3,
++			IPPROTO_UDP, NULL, &be_loport);
++
++		exp->master = ct;
++
++		exp->expectfn = expected;
++		exp->flags = 0;
++
++		if (expinfo.pbtype == pb_range) {
++			DEBUGP("Changing expectation mask to handle multiple ports\n");
++			exp->mask.src.u.udp.port  = 0xfffe;
++		}
++
++		DEBUGP("expect_related %u.%u.%u.%u:%u-%u.%u.%u.%u:%u\n",
++		       NIPQUAD(exp->tuple.src.u3.ip),
++		       ntohs(exp->tuple.src.u.udp.port),
++		       NIPQUAD(exp->tuple.dst.u3.ip),
++		       ntohs(exp->tuple.dst.u.udp.port));
++
++		if (nf_nat_rtsp_hook)
++			/* pass the request off to the nat helper */
++			ret = nf_nat_rtsp_hook(skb, ctinfo, hdrsoff, hdrslen, &expinfo, exp);
++		else if (nf_ct_expect_related(exp) != 0) {
++			INFOP("nf_ct_expect_related failed\n");
++			ret  = NF_DROP;
++		}
++		nf_ct_expect_put(exp);
++		goto out;
++	}
++out:
++
++	return ret;
++}
++
++
++static inline int
++help_in(struct sk_buff *skb, size_t pktlen,
++ struct nf_conn* ct, enum ip_conntrack_info ctinfo)
++{
++ return NF_ACCEPT;
++}
++
++static int help(struct sk_buff *skb, unsigned int protoff,
++		struct nf_conn *ct, enum ip_conntrack_info ctinfo)
++{
++	struct tcphdr _tcph, *th;
++	unsigned int dataoff, datalen;
++	char *rb_ptr;
++	int ret = NF_DROP;
++
++	/* Until there's been traffic both ways, don't look in packets. */
++	if (ctinfo != IP_CT_ESTABLISHED &&
++	    ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY) {
++		DEBUGP("conntrackinfo = %u\n", ctinfo);
++		return NF_ACCEPT;
++	}
++
++	/* Not whole TCP header? */
++	th = skb_header_pointer(skb, protoff, sizeof(_tcph), &_tcph);
++
++	if (!th)
++		return NF_ACCEPT;
++
++	/* No data ? */
++	dataoff = protoff + th->doff*4;
++	datalen = skb->len - dataoff;
++	if (dataoff >= skb->len)
++		return NF_ACCEPT;
++
++	spin_lock_bh(&rtsp_buffer_lock);
++	rb_ptr = skb_header_pointer(skb, dataoff,
++				    skb->len - dataoff, rtsp_buffer);
++	BUG_ON(rb_ptr == NULL);
++
++#if 0
++	/* Checksum invalid?  Ignore. */
++	/* FIXME: Source route IP option packets --RR */
++	if (tcp_v4_check(tcph, tcplen, iph->saddr, iph->daddr,
++			 csum_partial((char*)tcph, tcplen, 0)))
++	{
++		DEBUGP("bad csum: %p %u %u.%u.%u.%u %u.%u.%u.%u\n",
++		       tcph, tcplen, NIPQUAD(iph->saddr), NIPQUAD(iph->daddr));
++		return NF_ACCEPT;
++	}
++#endif
++
++	switch (CTINFO2DIR(ctinfo)) {
++	case IP_CT_DIR_ORIGINAL:
++		ret = help_out(skb, rb_ptr, datalen, ct, ctinfo);
++		break;
++	case IP_CT_DIR_REPLY:
++		DEBUGP("IP_CT_DIR_REPLY\n");
++		/* inbound packet: server->client */
++		ret = NF_ACCEPT;
++		break;
++	}
++
++	spin_unlock_bh(&rtsp_buffer_lock);
++
++	return ret;
++}
++
++static struct nf_conntrack_helper rtsp_helpers[MAX_PORTS];
++static char rtsp_names[MAX_PORTS][10];
++static struct nf_conntrack_expect_policy rtsp_expect_policy;
++
++/* This function is intentionally _NOT_ defined as __exit */
++static void
++fini(void)
++{
++	int i;
++	for (i = 0; i < num_ports; i++) {
++		DEBUGP("unregistering port %d\n", ports[i]);
++		nf_conntrack_helper_unregister(&rtsp_helpers[i]);
++	}
++	kfree(rtsp_buffer);
++}
++
++static int __init
++init(void)
++{
++	int i, ret;
++	struct nf_conntrack_helper *hlpr;
++	char *tmpname;
++
++	printk("nf_conntrack_rtsp v" IP_NF_RTSP_VERSION " loading\n");
++
++	if (max_outstanding < 1) {
++		printk("nf_conntrack_rtsp: max_outstanding must be a positive integer\n");
++		return -EBUSY;
++	}
++	if (setup_timeout < 0) {
++		printk("nf_conntrack_rtsp: setup_timeout must be a positive integer\n");
++		return -EBUSY;
++	}
++
++	rtsp_expect_policy.max_expected = max_outstanding;
++	rtsp_expect_policy.timeout = setup_timeout;
++
++	rtsp_buffer = kmalloc(65536, GFP_KERNEL);
++	if (!rtsp_buffer)
++		return -ENOMEM;
++
++	/* If no port given, default to standard rtsp port */
++	if (ports[0] == 0) {
++		ports[0] = RTSP_PORT;
++	}
++
++	for (i = 0; (i < MAX_PORTS) && ports[i]; i++) {
++		hlpr = &rtsp_helpers[i];
++		memset(hlpr, 0, sizeof(struct nf_conntrack_helper));
++		hlpr->tuple.src.u.tcp.port = htons(ports[i]);
++		hlpr->tuple.dst.protonum = IPPROTO_TCP;
++		hlpr->expect_policy = &rtsp_expect_policy;
++		hlpr->me = THIS_MODULE;
++		hlpr->help = help;
++
++		tmpname = &rtsp_names[i][0];
++		if (ports[i] == RTSP_PORT) {
++			sprintf(tmpname, "rtsp");
++		} else {
++			sprintf(tmpname, "rtsp-%d", i);
++		}
++		hlpr->name = tmpname;
++
++		DEBUGP("port #%d: %d\n", i, ports[i]);
++
++		ret = nf_conntrack_helper_register(hlpr);
++
++		if (ret) {
++			printk("nf_conntrack_rtsp: ERROR registering port %d\n", ports[i]);
++			fini();
++			return -EBUSY;
++		}
++		num_ports++;
++	}
++	return 0;
++}
++
++module_init(init);
++module_exit(fini);
++
++EXPORT_SYMBOL(nf_nat_rtsp_hook_expectfn);
++
+--- /dev/null
++++ b/net/ipv4/netfilter/nf_nat_rtsp.c
+@@ -0,0 +1,496 @@
++/*
++ * RTSP extension for TCP NAT alteration
++ * (C) 2003 by Tom Marshall <tmarshall at real.com>
++ * based on ip_nat_irc.c
++ *
++ *      This program is free software; you can redistribute it and/or
++ *      modify it under the terms of the GNU General Public License
++ *      as published by the Free Software Foundation; either version
++ *      2 of the License, or (at your option) any later version.
++ *
++ * Module load syntax:
++ *      insmod nf_nat_rtsp.o ports=port1,port2,...port<MAX_PORTS>
++ *                           stunaddr=<address>
++ *                           destaction=[auto|strip|none]
++ *
++ * If no ports are specified, the default will be port 554 only.
++ *
++ * stunaddr specifies the address used to detect that a client is using STUN.
++ * If this address is seen in the destination parameter, it is assumed that
++ * the client has already punched a UDP hole in the firewall, so we don't
++ * mangle the client_port.  If none is specified, it is autodetected.  It
++ * only needs to be set if you have multiple levels of NAT.  It should be
++ * set to the external address that the STUN clients detect.  Note that in
++ * this case, it will not be possible for clients to use UDP with servers
++ * between the NATs.
++ *
++ * If no destaction is specified, auto is used.
++ *   destaction=auto:  strip destination parameter if it is not stunaddr.
++ *   destaction=strip: always strip destination parameter (not recommended).
++ *   destaction=none:  do not touch destination parameter (not recommended).
++ */
++
++#include <linux/module.h>
++#include <net/tcp.h>
++#include <net/netfilter/nf_nat_helper.h>
++#include <net/netfilter/nf_nat_rule.h>
++#include <linux/netfilter/nf_conntrack_rtsp.h>
++#include <net/netfilter/nf_conntrack_expect.h>
++
++#include <linux/inet.h>
++#include <linux/ctype.h>
++#define NF_NEED_STRNCASECMP
++#define NF_NEED_STRTOU16
++#include <linux/netfilter_helpers.h>
++#define NF_NEED_MIME_NEXTLINE
++#include <linux/netfilter_mime.h>
++
++#define INFOP(fmt, args...) printk(KERN_INFO "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
++#if 0
++#define DEBUGP(fmt, args...) printk(KERN_DEBUG "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
++#else
++#define DEBUGP(fmt, args...)
++#endif
++
++#define MAX_PORTS       8
++#define DSTACT_AUTO     0
++#define DSTACT_STRIP    1
++#define DSTACT_NONE     2
++
++static char*    stunaddr = NULL;
++static char*    destaction = NULL;
++
++static u_int32_t extip = 0;
++static int       dstact = 0;
++
++MODULE_AUTHOR("Tom Marshall <tmarshall at real.com>");
++MODULE_DESCRIPTION("RTSP network address translation module");
++MODULE_LICENSE("GPL");
++module_param(stunaddr, charp, 0644);
++MODULE_PARM_DESC(stunaddr, "Address for detecting STUN");
++module_param(destaction, charp, 0644);
++MODULE_PARM_DESC(destaction, "Action for destination parameter (auto/strip/none)");
++
++#define SKIP_WSPACE(ptr,len,off) while(off < len && isspace(*(ptr+off))) { off++; }
++
++/*** helper functions ***/
++
++static void
++get_skb_tcpdata(struct sk_buff* skb, char** pptcpdata, uint* ptcpdatalen)
++{
++    struct iphdr*   iph  = ip_hdr(skb);
++    struct tcphdr*  tcph = (void *)iph + ip_hdrlen(skb);
++
++    *pptcpdata = (char*)tcph +  tcph->doff*4;
++    *ptcpdatalen = ((char*)skb_transport_header(skb) + skb->len) - *pptcpdata;
++}
++
++/*** nat functions ***/
++
++/*
++ * Mangle the "Transport:" header:
++ *   - Replace all occurences of "client_port=<spec>"
++ *   - Handle destination parameter
++ *
++ * In:
++ *   ct, ctinfo = conntrack context
++ *   skb        = packet
++ *   tranoff    = Transport header offset from TCP data
++ *   tranlen    = Transport header length (incl. CRLF)
++ *   rport_lo   = replacement low  port (host endian)
++ *   rport_hi   = replacement high port (host endian)
++ *
++ * Returns packet size difference.
++ *
++ * Assumes that a complete transport header is present, ending with CR or LF
++ */
++static int
++rtsp_mangle_tran(enum ip_conntrack_info ctinfo,
++                 struct nf_conntrack_expect* exp,
++								 struct ip_ct_rtsp_expect* prtspexp,
++                 struct sk_buff* skb, uint tranoff, uint tranlen)
++{
++    char*       ptcp;
++    uint        tcplen;
++    char*       ptran;
++    char        rbuf1[16];      /* Replacement buffer (one port) */
++    uint        rbuf1len;       /* Replacement len (one port) */
++    char        rbufa[16];      /* Replacement buffer (all ports) */
++    uint        rbufalen;       /* Replacement len (all ports) */
++    u_int32_t   newip;
++    u_int16_t   loport, hiport;
++    uint        off = 0;
++    uint        diff;           /* Number of bytes we removed */
++
++    struct nf_conn *ct = exp->master;
++    struct nf_conntrack_tuple *t;
++
++    char    szextaddr[15+1];
++    uint    extaddrlen;
++    int     is_stun;
++
++    get_skb_tcpdata(skb, &ptcp, &tcplen);
++    ptran = ptcp+tranoff;
++
++    if (tranoff+tranlen > tcplen || tcplen-tranoff < tranlen ||
++        tranlen < 10 || !iseol(ptran[tranlen-1]) ||
++        nf_strncasecmp(ptran, "Transport:", 10) != 0)
++    {
++        INFOP("sanity check failed\n");
++        return 0;
++    }
++    off += 10;
++    SKIP_WSPACE(ptcp+tranoff, tranlen, off);
++
++    newip = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip;
++    t = &exp->tuple;
++    t->dst.u3.ip = newip;
++
++    extaddrlen = extip ? sprintf(szextaddr, "%u.%u.%u.%u", NIPQUAD(extip))
++                       : sprintf(szextaddr, "%u.%u.%u.%u", NIPQUAD(newip));
++    DEBUGP("stunaddr=%s (%s)\n", szextaddr, (extip?"forced":"auto"));
++
++    rbuf1len = rbufalen = 0;
++    switch (prtspexp->pbtype)
++    {
++    case pb_single:
++        for (loport = prtspexp->loport; loport != 0; loport++) /* XXX: improper wrap? */
++        {
++            t->dst.u.udp.port = htons(loport);
++            if (nf_ct_expect_related(exp) == 0)
++            {
++                DEBUGP("using port %hu\n", loport);
++                break;
++            }
++        }
++        if (loport != 0)
++        {
++            rbuf1len = sprintf(rbuf1, "%hu", loport);
++            rbufalen = sprintf(rbufa, "%hu", loport);
++        }
++        break;
++    case pb_range:
++        for (loport = prtspexp->loport; loport != 0; loport += 2) /* XXX: improper wrap? */
++        {
++            t->dst.u.udp.port = htons(loport);
++            if (nf_ct_expect_related(exp) == 0)
++            {
++                hiport = loport + ~exp->mask.src.u.udp.port;
++                DEBUGP("using ports %hu-%hu\n", loport, hiport);
++                break;
++            }
++        }
++        if (loport != 0)
++        {
++            rbuf1len = sprintf(rbuf1, "%hu", loport);
++            rbufalen = sprintf(rbufa, "%hu-%hu", loport, loport+1);
++        }
++        break;
++    case pb_discon:
++        for (loport = prtspexp->loport; loport != 0; loport++) /* XXX: improper wrap? */
++        {
++            t->dst.u.udp.port = htons(loport);
++            if (nf_ct_expect_related(exp) == 0)
++            {
++                DEBUGP("using port %hu (1 of 2)\n", loport);
++                break;
++            }
++        }
++        for (hiport = prtspexp->hiport; hiport != 0; hiport++) /* XXX: improper wrap? */
++        {
++            t->dst.u.udp.port = htons(hiport);
++            if (nf_ct_expect_related(exp) == 0)
++            {
++                DEBUGP("using port %hu (2 of 2)\n", hiport);
++                break;
++            }
++        }
++        if (loport != 0 && hiport != 0)
++        {
++            rbuf1len = sprintf(rbuf1, "%hu", loport);
++            if (hiport == loport+1)
++            {
++                rbufalen = sprintf(rbufa, "%hu-%hu", loport, hiport);
++            }
++            else
++            {
++                rbufalen = sprintf(rbufa, "%hu/%hu", loport, hiport);
++            }
++        }
++        break;
++    }
++
++    if (rbuf1len == 0)
++    {
++        return 0;   /* cannot get replacement port(s) */
++    }
++
++    /* Transport: tran;field;field=val,tran;field;field=val,... */
++    while (off < tranlen)
++    {
++        uint        saveoff;
++        const char* pparamend;
++        uint        nextparamoff;
++
++        pparamend = memchr(ptran+off, ',', tranlen-off);
++        pparamend = (pparamend == NULL) ? ptran+tranlen : pparamend+1;
++        nextparamoff = pparamend-ptcp;
++
++        /*
++         * We pass over each param twice.  On the first pass, we look for a
++         * destination= field.  It is handled by the security policy.  If it
++         * is present, allowed, and equal to our external address, we assume
++         * that STUN is being used and we leave the client_port= field alone.
++         */
++        is_stun = 0;
++        saveoff = off;
++        while (off < nextparamoff)
++        {
++            const char* pfieldend;
++            uint        nextfieldoff;
++
++            pfieldend = memchr(ptran+off, ';', nextparamoff-off);
++            nextfieldoff = (pfieldend == NULL) ? nextparamoff : pfieldend-ptran+1;
++
++            if (dstact != DSTACT_NONE && strncmp(ptran+off, "destination=", 12) == 0)
++            {
++                if (strncmp(ptran+off+12, szextaddr, extaddrlen) == 0)
++                {
++                    is_stun = 1;
++                }
++                if (dstact == DSTACT_STRIP || (dstact == DSTACT_AUTO && !is_stun))
++                {
++                    diff = nextfieldoff-off;
++                    if (!nf_nat_mangle_tcp_packet(skb, ct, ctinfo,
++                                                         off, diff, NULL, 0))
++                    {
++                        /* mangle failed, all we can do is bail */
++			nf_ct_unexpect_related(exp);
++                        return 0;
++                    }
++                    get_skb_tcpdata(skb, &ptcp, &tcplen);
++                    ptran = ptcp+tranoff;
++                    tranlen -= diff;
++                    nextparamoff -= diff;
++                    nextfieldoff -= diff;
++                }
++            }
++
++            off = nextfieldoff;
++        }
++        if (is_stun)
++        {
++            continue;
++        }
++        off = saveoff;
++        while (off < nextparamoff)
++        {
++            const char* pfieldend;
++            uint        nextfieldoff;
++
++            pfieldend = memchr(ptran+off, ';', nextparamoff-off);
++            nextfieldoff = (pfieldend == NULL) ? nextparamoff : pfieldend-ptran+1;
++
++            if (strncmp(ptran+off, "client_port=", 12) == 0)
++            {
++                u_int16_t   port;
++                uint        numlen;
++                uint        origoff;
++                uint        origlen;
++                char*       rbuf    = rbuf1;
++                uint        rbuflen = rbuf1len;
++
++                off += 12;
++                origoff = (ptran-ptcp)+off;
++                origlen = 0;
++                numlen = nf_strtou16(ptran+off, &port);
++                off += numlen;
++                origlen += numlen;
++                if (port != prtspexp->loport)
++                {
++                    DEBUGP("multiple ports found, port %hu ignored\n", port);
++                }
++                else
++                {
++                    if (ptran[off] == '-' || ptran[off] == '/')
++                    {
++                        off++;
++                        origlen++;
++                        numlen = nf_strtou16(ptran+off, &port);
++                        off += numlen;
++                        origlen += numlen;
++                        rbuf = rbufa;
++                        rbuflen = rbufalen;
++                    }
++
++                    /*
++                     * note we cannot just memcpy() if the sizes are the same.
++                     * the mangle function does skb resizing, checks for a
++                     * cloned skb, and updates the checksums.
++                     *
++                     * parameter 4 below is offset from start of tcp data.
++                     */
++                    diff = origlen-rbuflen;
++                    if (!nf_nat_mangle_tcp_packet(skb, ct, ctinfo,
++                                              origoff, origlen, rbuf, rbuflen))
++                    {
++                        /* mangle failed, all we can do is bail */
++			nf_ct_unexpect_related(exp);
++                        return 0;
++                    }
++                    get_skb_tcpdata(skb, &ptcp, &tcplen);
++                    ptran = ptcp+tranoff;
++                    tranlen -= diff;
++                    nextparamoff -= diff;
++                    nextfieldoff -= diff;
++                }
++            }
++
++            off = nextfieldoff;
++        }
++
++        off = nextparamoff;
++    }
++
++    return 1;
++}
++
++static uint
++help_out(struct sk_buff *skb, enum ip_conntrack_info ctinfo,
++	 unsigned int matchoff, unsigned int matchlen, struct ip_ct_rtsp_expect* prtspexp,
++	 struct nf_conntrack_expect* exp)
++{
++    char*   ptcp;
++    uint    tcplen;
++    uint    hdrsoff;
++    uint    hdrslen;
++    uint    lineoff;
++    uint    linelen;
++    uint    off;
++
++    //struct iphdr* iph = (struct iphdr*)skb->nh.iph;
++    //struct tcphdr* tcph = (struct tcphdr*)((void*)iph + iph->ihl*4);
++
++    get_skb_tcpdata(skb, &ptcp, &tcplen);
++    hdrsoff = matchoff;//exp->seq - ntohl(tcph->seq);
++    hdrslen = matchlen;
++    off = hdrsoff;
++    DEBUGP("NAT rtsp help_out\n");
++
++    while (nf_mime_nextline(ptcp, hdrsoff+hdrslen, &off, &lineoff, &linelen))
++    {
++        if (linelen == 0)
++        {
++            break;
++        }
++        if (off > hdrsoff+hdrslen)
++        {
++            INFOP("!! overrun !!");
++            break;
++        }
++        DEBUGP("hdr: len=%u, %.*s", linelen, (int)linelen, ptcp+lineoff);
++
++        if (nf_strncasecmp(ptcp+lineoff, "Transport:", 10) == 0)
++        {
++            uint oldtcplen = tcplen;
++	    DEBUGP("hdr: Transport\n");
++            if (!rtsp_mangle_tran(ctinfo, exp, prtspexp, skb, lineoff, linelen))
++            {
++		DEBUGP("hdr: Transport mangle failed");
++                break;
++            }
++            get_skb_tcpdata(skb, &ptcp, &tcplen);
++            hdrslen -= (oldtcplen-tcplen);
++            off -= (oldtcplen-tcplen);
++            lineoff -= (oldtcplen-tcplen);
++            linelen -= (oldtcplen-tcplen);
++            DEBUGP("rep: len=%u, %.*s", linelen, (int)linelen, ptcp+lineoff);
++        }
++    }
++
++    return NF_ACCEPT;
++}
++
++static unsigned int
++help(struct sk_buff *skb, enum ip_conntrack_info ctinfo,
++     unsigned int matchoff, unsigned int matchlen, struct ip_ct_rtsp_expect* prtspexp,
++     struct nf_conntrack_expect* exp)
++{
++    int dir = CTINFO2DIR(ctinfo);
++    int rc = NF_ACCEPT;
++
++    switch (dir)
++    {
++    case IP_CT_DIR_ORIGINAL:
++        rc = help_out(skb, ctinfo, matchoff, matchlen, prtspexp, exp);
++        break;
++    case IP_CT_DIR_REPLY:
++	DEBUGP("unmangle ! %u\n", ctinfo);
++    	/* XXX: unmangle */
++	rc = NF_ACCEPT;
++        break;
++    }
++    //UNLOCK_BH(&ip_rtsp_lock);
++
++    return rc;
++}
++
++static void expected(struct nf_conn* ct, struct nf_conntrack_expect *exp)
++{
++    struct nf_nat_multi_range_compat mr;
++    u_int32_t newdstip, newsrcip, newip;
++
++    struct nf_conn *master = ct->master;
++
++    newdstip = master->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
++    newsrcip = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
++    //FIXME (how to port that ?)
++    //code from 2.4 : newip = (HOOK2MANIP(hooknum) == IP_NAT_MANIP_SRC) ? newsrcip : newdstip;
++    newip = newdstip;
++
++    DEBUGP("newsrcip=%u.%u.%u.%u, newdstip=%u.%u.%u.%u, newip=%u.%u.%u.%u\n",
++           NIPQUAD(newsrcip), NIPQUAD(newdstip), NIPQUAD(newip));
++
++    mr.rangesize = 1;
++    // We don't want to manip the per-protocol, just the IPs.
++    mr.range[0].flags = IP_NAT_RANGE_MAP_IPS;
++    mr.range[0].min_ip = mr.range[0].max_ip = newip;
++
++    nf_nat_setup_info(ct, &mr.range[0], IP_NAT_MANIP_DST);
++}
++
++
++static void __exit fini(void)
++{
++	nf_nat_rtsp_hook = NULL;
++        nf_nat_rtsp_hook_expectfn = NULL;
++	synchronize_net();
++}
++
++static int __init init(void)
++{
++	printk("nf_nat_rtsp v" IP_NF_RTSP_VERSION " loading\n");
++
++	BUG_ON(nf_nat_rtsp_hook);
++	nf_nat_rtsp_hook = help;
++        nf_nat_rtsp_hook_expectfn = &expected;
++
++	if (stunaddr != NULL)
++		extip = in_aton(stunaddr);
++
++	if (destaction != NULL) {
++	        if (strcmp(destaction, "auto") == 0)
++			dstact = DSTACT_AUTO;
++
++		if (strcmp(destaction, "strip") == 0)
++			dstact = DSTACT_STRIP;
++
++		if (strcmp(destaction, "none") == 0)
++			dstact = DSTACT_NONE;
++	}
++
++	return 0;
++}
++
++module_init(init);
++module_exit(fini);
diff --git a/target/linux/generic/patches-2.6.33/200-sched_esfq.patch b/target/linux/generic/patches-2.6.33/200-sched_esfq.patch
new file mode 100644
index 0000000000..1d513580b3
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/200-sched_esfq.patch
@@ -0,0 +1,795 @@
+--- a/include/linux/pkt_sched.h
++++ b/include/linux/pkt_sched.h
+@@ -173,8 +173,37 @@ struct tc_sfq_xstats {
+  *
+  *	The only reason for this is efficiency, it is possible
+  *	to change these parameters in compile time.
++ *
++ *	If you need to play with these values, use esfq instead.
+  */
+ 
++/* ESFQ section */
++
++enum
++{
++        /* traditional */
++	TCA_SFQ_HASH_CLASSIC,
++	TCA_SFQ_HASH_DST,
++	TCA_SFQ_HASH_SRC,
++	TCA_SFQ_HASH_FWMARK,
++	/* conntrack */
++	TCA_SFQ_HASH_CTORIGDST,
++	TCA_SFQ_HASH_CTORIGSRC,
++	TCA_SFQ_HASH_CTREPLDST,
++	TCA_SFQ_HASH_CTREPLSRC,
++	TCA_SFQ_HASH_CTNATCHG,
++};
++
++struct tc_esfq_qopt
++{
++	unsigned	quantum;	/* Bytes per round allocated to flow */
++	int		perturb_period;	/* Period of hash perturbation */
++	__u32		limit;		/* Maximal packets in queue */
++	unsigned	divisor;	/* Hash divisor  */
++	unsigned	flows;		/* Maximal number of flows  */
++	unsigned	hash_kind;	/* Hash function to use for flow identification */
++};
++
+ /* RED section */
+ 
+ enum {
+--- a/net/sched/Kconfig
++++ b/net/sched/Kconfig
+@@ -137,6 +137,37 @@ config NET_SCH_SFQ
+ 	  To compile this code as a module, choose M here: the
+ 	  module will be called sch_sfq.
+ 
++config NET_SCH_ESFQ
++	tristate "Enhanced Stochastic Fairness Queueing (ESFQ)"
++	---help---
++	  Say Y here if you want to use the Enhanced Stochastic Fairness
++	  Queueing (ESFQ) packet scheduling algorithm for some of your network
++	  devices or as a leaf discipline for a classful qdisc such as HTB or
++	  CBQ (see the top of <file:net/sched/sch_esfq.c> for details and
++	  references to the SFQ algorithm).
++
++	  This is an enchanced SFQ version which allows you to control some
++	  hardcoded values in the SFQ scheduler.
++
++	  ESFQ also adds control of the hash function used to identify packet
++	  flows. The original SFQ discipline hashes by connection; ESFQ add
++	  several other hashing methods, such as by src IP or by dst IP, which
++	  can be more fair to users in some networking situations.
++
++	  To compile this code as a module, choose M here: the
++	  module will be called sch_esfq.
++
++config NET_SCH_ESFQ_NFCT
++	bool "Connection Tracking Hash Types"
++	depends on NET_SCH_ESFQ && NF_CONNTRACK
++	---help---
++	  Say Y here to enable support for hashing based on netfilter connection
++	  tracking information. This is useful for a router that is also using
++	  NAT to connect privately-addressed hosts to the Internet. If you want
++	  to provide fair distribution of upstream bandwidth, ESFQ must use
++	  connection tracking information, since all outgoing packets will share
++	  the same source address.
++
+ config NET_SCH_TEQL
+ 	tristate "True Link Equalizer (TEQL)"
+ 	---help---
+--- a/net/sched/Makefile
++++ b/net/sched/Makefile
+@@ -24,6 +24,7 @@ obj-$(CONFIG_NET_SCH_GRED)	+= sch_gred.o
+ obj-$(CONFIG_NET_SCH_INGRESS)	+= sch_ingress.o 
+ obj-$(CONFIG_NET_SCH_DSMARK)	+= sch_dsmark.o
+ obj-$(CONFIG_NET_SCH_SFQ)	+= sch_sfq.o
++obj-$(CONFIG_NET_SCH_ESFQ)	+= sch_esfq.o
+ obj-$(CONFIG_NET_SCH_TBF)	+= sch_tbf.o
+ obj-$(CONFIG_NET_SCH_TEQL)	+= sch_teql.o
+ obj-$(CONFIG_NET_SCH_PRIO)	+= sch_prio.o
+--- /dev/null
++++ b/net/sched/sch_esfq.c
+@@ -0,0 +1,702 @@
++/*
++ * net/sched/sch_esfq.c	Extended Stochastic Fairness Queueing discipline.
++ *
++ *		This program is free software; you can redistribute it and/or
++ *		modify it under the terms of the GNU General Public License
++ *		as published by the Free Software Foundation; either version
++ *		2 of the License, or (at your option) any later version.
++ *
++ * Authors:	Alexey Kuznetsov, <kuznet@ms2.inr.ac.ru>
++ *
++ * Changes:	Alexander Atanasov, <alex@ssi.bg>
++ *		Added dynamic depth,limit,divisor,hash_kind options.
++ *		Added dst and src hashes.
++ *
++ * 		Alexander Clouter, <alex@digriz.org.uk>
++ *		Ported ESFQ to Linux 2.6.
++ *
++ * 		Corey Hickey, <bugfood-c@fatooh.org>
++ *		Maintenance of the Linux 2.6 port.
++ *		Added fwmark hash (thanks to Robert Kurjata).
++ *		Added usage of jhash.
++ *		Added conntrack support.
++ *		Added ctnatchg hash (thanks to Ben Pfountz).
++ */
++
++#include <linux/module.h>
++#include <asm/uaccess.h>
++#include <asm/system.h>
++#include <linux/bitops.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/jiffies.h>
++#include <linux/string.h>
++#include <linux/mm.h>
++#include <linux/socket.h>
++#include <linux/sockios.h>
++#include <linux/in.h>
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/if_ether.h>
++#include <linux/inet.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/notifier.h>
++#include <linux/init.h>
++#include <net/ip.h>
++#include <net/netlink.h>
++#include <linux/ipv6.h>
++#include <net/route.h>
++#include <linux/skbuff.h>
++#include <net/sock.h>
++#include <net/pkt_sched.h>
++#include <linux/jhash.h>
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++#include <net/netfilter/nf_conntrack.h>
++#endif
++
++/*	Stochastic Fairness Queuing algorithm.
++	For more comments look at sch_sfq.c.
++	The difference is that you can change limit, depth,
++	hash table size and choose alternate hash types.
++
++	classic:	same as in sch_sfq.c
++	dst:		destination IP address
++	src:		source IP address
++	fwmark:		netfilter mark value
++	ctorigdst:	original destination IP address
++	ctorigsrc:	original source IP address
++	ctrepldst:	reply destination IP address
++	ctreplsrc:	reply source IP
++
++*/
++
++#define ESFQ_HEAD 0
++#define ESFQ_TAIL 1
++
++/* This type should contain at least SFQ_DEPTH*2 values */
++typedef unsigned int esfq_index;
++
++struct esfq_head
++{
++	esfq_index	next;
++	esfq_index	prev;
++};
++
++struct esfq_sched_data
++{
++/* Parameters */
++	int		perturb_period;
++	unsigned	quantum;	/* Allotment per round: MUST BE >= MTU */
++	int		limit;
++	unsigned	depth;
++	unsigned	hash_divisor;
++	unsigned	hash_kind;
++/* Variables */
++	struct timer_list perturb_timer;
++	int		perturbation;
++	esfq_index	tail;		/* Index of current slot in round */
++	esfq_index	max_depth;	/* Maximal depth */
++
++	esfq_index	*ht;			/* Hash table */
++	esfq_index	*next;			/* Active slots link */
++	short		*allot;			/* Current allotment per slot */
++	unsigned short	*hash;			/* Hash value indexed by slots */
++	struct sk_buff_head	*qs;		/* Slot queue */
++	struct esfq_head	*dep;		/* Linked list of slots, indexed by depth */
++};
++
++/* This contains the info we will hash. */
++struct esfq_packet_info
++{
++	u32	proto;		/* protocol or port */
++	u32	src;		/* source from packet header */
++	u32	dst;		/* destination from packet header */
++	u32	ctorigsrc;	/* original source from conntrack */
++	u32	ctorigdst;	/* original destination from conntrack */
++	u32	ctreplsrc;	/* reply source from conntrack */
++	u32	ctrepldst;	/* reply destination from conntrack */
++	u32	mark;		/* netfilter mark (fwmark) */
++};
++
++static __inline__ unsigned esfq_jhash_1word(struct esfq_sched_data *q,u32 a)
++{
++	return jhash_1word(a, q->perturbation) & (q->hash_divisor-1);
++}
++
++static __inline__ unsigned esfq_jhash_2words(struct esfq_sched_data *q, u32 a, u32 b)
++{
++	return jhash_2words(a, b, q->perturbation) & (q->hash_divisor-1);
++}
++
++static __inline__ unsigned esfq_jhash_3words(struct esfq_sched_data *q, u32 a, u32 b, u32 c)
++{
++	return jhash_3words(a, b, c, q->perturbation) & (q->hash_divisor-1);
++}
++
++static unsigned esfq_hash(struct esfq_sched_data *q, struct sk_buff *skb)
++{
++	struct esfq_packet_info info;
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++	enum ip_conntrack_info ctinfo;
++	struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
++#endif
++
++	switch (skb->protocol) {
++	case __constant_htons(ETH_P_IP):
++	{
++		struct iphdr *iph = ip_hdr(skb);
++		info.dst = iph->daddr;
++		info.src = iph->saddr;
++		if (!(iph->frag_off&htons(IP_MF|IP_OFFSET)) &&
++		    (iph->protocol == IPPROTO_TCP ||
++		     iph->protocol == IPPROTO_UDP ||
++		     iph->protocol == IPPROTO_SCTP ||
++		     iph->protocol == IPPROTO_DCCP ||
++		     iph->protocol == IPPROTO_ESP))
++			info.proto = *(((u32*)iph) + iph->ihl);
++		else
++			info.proto = iph->protocol;
++		break;
++	}
++	case __constant_htons(ETH_P_IPV6):
++	{
++		struct ipv6hdr *iph = ipv6_hdr(skb);
++		/* Hash ipv6 addresses into a u32. This isn't ideal,
++		 * but the code is simple. */
++		info.dst = jhash2(iph->daddr.s6_addr32, 4, q->perturbation);
++		info.src = jhash2(iph->saddr.s6_addr32, 4, q->perturbation);
++		if (iph->nexthdr == IPPROTO_TCP ||
++		    iph->nexthdr == IPPROTO_UDP ||
++		    iph->nexthdr == IPPROTO_SCTP ||
++		    iph->nexthdr == IPPROTO_DCCP ||
++		    iph->nexthdr == IPPROTO_ESP)
++			info.proto = *(u32*)&iph[1];
++		else
++			info.proto = iph->nexthdr;
++		break;
++	}
++	default:
++		info.dst   = (u32)(unsigned long)skb_dst(skb);
++		info.src   = (u32)(unsigned long)skb->sk;
++		info.proto = skb->protocol;
++	}
++
++	info.mark = skb->mark;
++
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++	/* defaults if there is no conntrack info */
++	info.ctorigsrc = info.src;
++	info.ctorigdst = info.dst;
++	info.ctreplsrc = info.dst;
++	info.ctrepldst = info.src;
++	/* collect conntrack info */
++	if (ct && ct != &nf_conntrack_untracked) {
++		if (skb->protocol == __constant_htons(ETH_P_IP)) {
++			info.ctorigsrc = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
++			info.ctorigdst = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3.ip;
++			info.ctreplsrc = ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3.ip;
++			info.ctrepldst = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip;
++		}
++		else if (skb->protocol == __constant_htons(ETH_P_IPV6)) {
++			/* Again, hash ipv6 addresses into a single u32. */
++			info.ctorigsrc = jhash2(ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip6, 4, q->perturbation);
++			info.ctorigdst = jhash2(ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3.ip6, 4, q->perturbation);
++			info.ctreplsrc = jhash2(ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3.ip6, 4, q->perturbation);
++			info.ctrepldst = jhash2(ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip6, 4, q->perturbation);
++		}
++
++	}
++#endif
++
++	switch(q->hash_kind) {
++	case TCA_SFQ_HASH_CLASSIC:
++		return esfq_jhash_3words(q, info.dst, info.src, info.proto);
++	case TCA_SFQ_HASH_DST:
++		return esfq_jhash_1word(q, info.dst);
++	case TCA_SFQ_HASH_SRC:
++		return esfq_jhash_1word(q, info.src);
++	case TCA_SFQ_HASH_FWMARK:
++		return esfq_jhash_1word(q, info.mark);
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++	case TCA_SFQ_HASH_CTORIGDST:
++		return esfq_jhash_1word(q, info.ctorigdst);
++	case TCA_SFQ_HASH_CTORIGSRC:
++		return esfq_jhash_1word(q, info.ctorigsrc);
++	case TCA_SFQ_HASH_CTREPLDST:
++		return esfq_jhash_1word(q, info.ctrepldst);
++	case TCA_SFQ_HASH_CTREPLSRC:
++		return esfq_jhash_1word(q, info.ctreplsrc);
++	case TCA_SFQ_HASH_CTNATCHG:
++	{
++		if (info.ctorigdst == info.ctreplsrc)
++			return esfq_jhash_1word(q, info.ctorigsrc);
++		return esfq_jhash_1word(q, info.ctreplsrc);
++	}
++#endif
++	default:
++		if (net_ratelimit())
++			printk(KERN_WARNING "ESFQ: Unknown hash method. Falling back to classic.\n");
++	}
++	return esfq_jhash_3words(q, info.dst, info.src, info.proto);
++}
++
++static inline void esfq_link(struct esfq_sched_data *q, esfq_index x)
++{
++	esfq_index p, n;
++	int d = q->qs[x].qlen + q->depth;
++
++	p = d;
++	n = q->dep[d].next;
++	q->dep[x].next = n;
++	q->dep[x].prev = p;
++	q->dep[p].next = q->dep[n].prev = x;
++}
++
++static inline void esfq_dec(struct esfq_sched_data *q, esfq_index x)
++{
++	esfq_index p, n;
++
++	n = q->dep[x].next;
++	p = q->dep[x].prev;
++	q->dep[p].next = n;
++	q->dep[n].prev = p;
++
++	if (n == p && q->max_depth == q->qs[x].qlen + 1)
++		q->max_depth--;
++
++	esfq_link(q, x);
++}
++
++static inline void esfq_inc(struct esfq_sched_data *q, esfq_index x)
++{
++	esfq_index p, n;
++	int d;
++
++	n = q->dep[x].next;
++	p = q->dep[x].prev;
++	q->dep[p].next = n;
++	q->dep[n].prev = p;
++	d = q->qs[x].qlen;
++	if (q->max_depth < d)
++		q->max_depth = d;
++
++	esfq_link(q, x);
++}
++
++static unsigned int esfq_drop(struct Qdisc *sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_index d = q->max_depth;
++	struct sk_buff *skb;
++	unsigned int len;
++
++	/* Queue is full! Find the longest slot and
++	   drop a packet from it */
++
++	if (d > 1) {
++		esfq_index x = q->dep[d+q->depth].next;
++		skb = q->qs[x].prev;
++		len = skb->len;
++		__skb_unlink(skb, &q->qs[x]);
++		kfree_skb(skb);
++		esfq_dec(q, x);
++		sch->q.qlen--;
++		sch->qstats.drops++;
++		sch->qstats.backlog -= len;
++		return len;
++	}
++
++	if (d == 1) {
++		/* It is difficult to believe, but ALL THE SLOTS HAVE LENGTH 1. */
++		d = q->next[q->tail];
++		q->next[q->tail] = q->next[d];
++		q->allot[q->next[d]] += q->quantum;
++		skb = q->qs[d].prev;
++		len = skb->len;
++		__skb_unlink(skb, &q->qs[d]);
++		kfree_skb(skb);
++		esfq_dec(q, d);
++		sch->q.qlen--;
++		q->ht[q->hash[d]] = q->depth;
++		sch->qstats.drops++;
++		sch->qstats.backlog -= len;
++		return len;
++	}
++
++	return 0;
++}
++
++static void esfq_q_enqueue(struct sk_buff *skb, struct esfq_sched_data *q, unsigned int end)
++{
++	unsigned hash = esfq_hash(q, skb);
++	unsigned depth = q->depth;
++	esfq_index x;
++
++	x = q->ht[hash];
++	if (x == depth) {
++		q->ht[hash] = x = q->dep[depth].next;
++		q->hash[x] = hash;
++	}
++
++	if (end == ESFQ_TAIL)
++		__skb_queue_tail(&q->qs[x], skb);
++	else
++		__skb_queue_head(&q->qs[x], skb);
++
++	esfq_inc(q, x);
++	if (q->qs[x].qlen == 1) {		/* The flow is new */
++		if (q->tail == depth) {	/* It is the first flow */
++			q->tail = x;
++			q->next[x] = x;
++			q->allot[x] = q->quantum;
++		} else {
++			q->next[x] = q->next[q->tail];
++			q->next[q->tail] = x;
++			q->tail = x;
++		}
++	}
++}
++
++static int esfq_enqueue(struct sk_buff *skb, struct Qdisc* sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_q_enqueue(skb, q, ESFQ_TAIL);
++	sch->qstats.backlog += skb->len;
++	if (++sch->q.qlen < q->limit-1) {
++		sch->bstats.bytes += skb->len;
++		sch->bstats.packets++;
++		return 0;
++	}
++
++	sch->qstats.drops++;
++	esfq_drop(sch);
++	return NET_XMIT_CN;
++}
++
++static struct sk_buff *esfq_peek(struct Qdisc* sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_index a;
++
++	/* No active slots */
++	if (q->tail == q->depth)
++		return NULL;
++
++	a = q->next[q->tail];
++	return skb_peek(&q->qs[a]);
++}
++
++static struct sk_buff *esfq_q_dequeue(struct esfq_sched_data *q)
++{
++	struct sk_buff *skb;
++	unsigned depth = q->depth;
++	esfq_index a, old_a;
++
++	/* No active slots */
++	if (q->tail == depth)
++		return NULL;
++
++	a = old_a = q->next[q->tail];
++
++	/* Grab packet */
++	skb = __skb_dequeue(&q->qs[a]);
++	esfq_dec(q, a);
++
++	/* Is the slot empty? */
++	if (q->qs[a].qlen == 0) {
++		q->ht[q->hash[a]] = depth;
++		a = q->next[a];
++		if (a == old_a) {
++			q->tail = depth;
++			return skb;
++		}
++		q->next[q->tail] = a;
++		q->allot[a] += q->quantum;
++	} else if ((q->allot[a] -= skb->len) <= 0) {
++		q->tail = a;
++		a = q->next[a];
++		q->allot[a] += q->quantum;
++	}
++
++	return skb;
++}
++
++static struct sk_buff *esfq_dequeue(struct Qdisc* sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	struct sk_buff *skb;
++
++	skb = esfq_q_dequeue(q);
++	if (skb == NULL)
++		return NULL;
++	sch->q.qlen--;
++	sch->qstats.backlog -= skb->len;
++	return skb;
++}
++
++static void esfq_q_destroy(struct esfq_sched_data *q)
++{
++	del_timer(&q->perturb_timer);
++	if(q->ht)
++		kfree(q->ht);
++	if(q->dep)
++		kfree(q->dep);
++	if(q->next)
++		kfree(q->next);
++	if(q->allot)
++		kfree(q->allot);
++	if(q->hash)
++		kfree(q->hash);
++	if(q->qs)
++		kfree(q->qs);
++}
++
++static void esfq_destroy(struct Qdisc *sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_q_destroy(q);
++}
++
++
++static void esfq_reset(struct Qdisc* sch)
++{
++	struct sk_buff *skb;
++
++	while ((skb = esfq_dequeue(sch)) != NULL)
++		kfree_skb(skb);
++}
++
++static void esfq_perturbation(unsigned long arg)
++{
++	struct Qdisc *sch = (struct Qdisc*)arg;
++	struct esfq_sched_data *q = qdisc_priv(sch);
++
++	q->perturbation = net_random()&0x1F;
++
++	if (q->perturb_period) {
++		q->perturb_timer.expires = jiffies + q->perturb_period;
++		add_timer(&q->perturb_timer);
++	}
++}
++
++static unsigned int esfq_check_hash(unsigned int kind)
++{
++	switch (kind) {
++	case TCA_SFQ_HASH_CTORIGDST:
++	case TCA_SFQ_HASH_CTORIGSRC:
++	case TCA_SFQ_HASH_CTREPLDST:
++	case TCA_SFQ_HASH_CTREPLSRC:
++	case TCA_SFQ_HASH_CTNATCHG:
++#ifndef CONFIG_NET_SCH_ESFQ_NFCT
++	{
++		if (net_ratelimit())
++			printk(KERN_WARNING "ESFQ: Conntrack hash types disabled in kernel config. Falling back to classic.\n");
++		return TCA_SFQ_HASH_CLASSIC;
++	}
++#endif
++	case TCA_SFQ_HASH_CLASSIC:
++	case TCA_SFQ_HASH_DST:
++	case TCA_SFQ_HASH_SRC:
++	case TCA_SFQ_HASH_FWMARK:
++		return kind;
++	default:
++	{
++		if (net_ratelimit())
++			printk(KERN_WARNING "ESFQ: Unknown hash type. Falling back to classic.\n");
++		return TCA_SFQ_HASH_CLASSIC;
++	}
++	}
++}
++
++static int esfq_q_init(struct esfq_sched_data *q, struct nlattr *opt)
++{
++	struct tc_esfq_qopt *ctl = nla_data(opt);
++	esfq_index p = ~0U/2;
++	int i;
++
++	if (opt && opt->nla_len < nla_attr_size(sizeof(*ctl)))
++		return -EINVAL;
++
++	q->perturbation = 0;
++	q->hash_kind = TCA_SFQ_HASH_CLASSIC;
++	q->max_depth = 0;
++	if (opt == NULL) {
++		q->perturb_period = 0;
++		q->hash_divisor = 1024;
++		q->tail = q->limit = q->depth = 128;
++
++	} else {
++		struct tc_esfq_qopt *ctl = nla_data(opt);
++		if (ctl->quantum)
++			q->quantum = ctl->quantum;
++		q->perturb_period = ctl->perturb_period*HZ;
++		q->hash_divisor = ctl->divisor ? : 1024;
++		q->tail = q->limit = q->depth = ctl->flows ? : 128;
++
++		if ( q->depth > p - 1 )
++			return -EINVAL;
++
++		if (ctl->limit)
++			q->limit = min_t(u32, ctl->limit, q->depth);
++
++		if (ctl->hash_kind) {
++			q->hash_kind = esfq_check_hash(ctl->hash_kind);
++		}
++	}
++
++	q->ht = kmalloc(q->hash_divisor*sizeof(esfq_index), GFP_KERNEL);
++	if (!q->ht)
++		goto err_case;
++	q->dep = kmalloc((1+q->depth*2)*sizeof(struct esfq_head), GFP_KERNEL);
++	if (!q->dep)
++		goto err_case;
++	q->next = kmalloc(q->depth*sizeof(esfq_index), GFP_KERNEL);
++	if (!q->next)
++		goto err_case;
++	q->allot = kmalloc(q->depth*sizeof(short), GFP_KERNEL);
++	if (!q->allot)
++		goto err_case;
++	q->hash = kmalloc(q->depth*sizeof(unsigned short), GFP_KERNEL);
++	if (!q->hash)
++		goto err_case;
++	q->qs = kmalloc(q->depth*sizeof(struct sk_buff_head), GFP_KERNEL);
++	if (!q->qs)
++		goto err_case;
++
++	for (i=0; i< q->hash_divisor; i++)
++		q->ht[i] = q->depth;
++	for (i=0; i<q->depth; i++) {
++		skb_queue_head_init(&q->qs[i]);
++		q->dep[i+q->depth].next = i+q->depth;
++		q->dep[i+q->depth].prev = i+q->depth;
++	}
++
++	for (i=0; i<q->depth; i++)
++		esfq_link(q, i);
++	return 0;
++err_case:
++	esfq_q_destroy(q);
++	return -ENOBUFS;
++}
++
++static int esfq_init(struct Qdisc *sch, struct nlattr *opt)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	int err;
++
++	q->quantum = psched_mtu(qdisc_dev(sch)); /* default */
++	if ((err = esfq_q_init(q, opt)))
++		return err;
++
++	init_timer(&q->perturb_timer);
++	q->perturb_timer.data = (unsigned long)sch;
++	q->perturb_timer.function = esfq_perturbation;
++	if (q->perturb_period) {
++		q->perturb_timer.expires = jiffies + q->perturb_period;
++		add_timer(&q->perturb_timer);
++	}
++
++	return 0;
++}
++
++static int esfq_change(struct Qdisc *sch, struct nlattr *opt)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	struct esfq_sched_data new;
++	struct sk_buff *skb;
++	int err;
++
++	/* set up new queue */
++	memset(&new, 0, sizeof(struct esfq_sched_data));
++	new.quantum = psched_mtu(qdisc_dev(sch)); /* default */
++	if ((err = esfq_q_init(&new, opt)))
++		return err;
++
++	/* copy all packets from the old queue to the new queue */
++	sch_tree_lock(sch);
++	while ((skb = esfq_q_dequeue(q)) != NULL)
++		esfq_q_enqueue(skb, &new, ESFQ_TAIL);
++
++	/* clean up the old queue */
++	esfq_q_destroy(q);
++
++	/* copy elements of the new queue into the old queue */
++	q->perturb_period = new.perturb_period;
++	q->quantum        = new.quantum;
++	q->limit          = new.limit;
++	q->depth          = new.depth;
++	q->hash_divisor   = new.hash_divisor;
++	q->hash_kind      = new.hash_kind;
++	q->tail           = new.tail;
++	q->max_depth      = new.max_depth;
++	q->ht    = new.ht;
++	q->dep   = new.dep;
++	q->next  = new.next;
++	q->allot = new.allot;
++	q->hash  = new.hash;
++	q->qs    = new.qs;
++
++	/* finish up */
++	if (q->perturb_period) {
++		q->perturb_timer.expires = jiffies + q->perturb_period;
++		add_timer(&q->perturb_timer);
++	} else {
++		q->perturbation = 0;
++	}
++	sch_tree_unlock(sch);
++	return 0;
++}
++
++static int esfq_dump(struct Qdisc *sch, struct sk_buff *skb)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	unsigned char *b = skb_tail_pointer(skb);
++	struct tc_esfq_qopt opt;
++
++	opt.quantum = q->quantum;
++	opt.perturb_period = q->perturb_period/HZ;
++
++	opt.limit = q->limit;
++	opt.divisor = q->hash_divisor;
++	opt.flows = q->depth;
++	opt.hash_kind = q->hash_kind;
++
++	NLA_PUT(skb, TCA_OPTIONS, sizeof(opt), &opt);
++
++	return skb->len;
++
++nla_put_failure:
++	nlmsg_trim(skb, b);
++	return -1;
++}
++
++static struct Qdisc_ops esfq_qdisc_ops =
++{
++	.next		=	NULL,
++	.cl_ops		=	NULL,
++	.id		=	"esfq",
++	.priv_size	=	sizeof(struct esfq_sched_data),
++	.enqueue	=	esfq_enqueue,
++	.dequeue	=	esfq_dequeue,
++	.peek		=	esfq_peek,
++	.drop		=	esfq_drop,
++	.init		=	esfq_init,
++	.reset		=	esfq_reset,
++	.destroy	=	esfq_destroy,
++	.change		=	esfq_change,
++	.dump		=	esfq_dump,
++	.owner		=	THIS_MODULE,
++};
++
++static int __init esfq_module_init(void)
++{
++	return register_qdisc(&esfq_qdisc_ops);
++}
++static void __exit esfq_module_exit(void)
++{
++	unregister_qdisc(&esfq_qdisc_ops);
++}
++module_init(esfq_module_init)
++module_exit(esfq_module_exit)
++MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/patches-2.6.33/201-jhash3.patch b/target/linux/generic/patches-2.6.33/201-jhash3.patch
new file mode 100644
index 0000000000..0218fa19c5
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/201-jhash3.patch
@@ -0,0 +1,227 @@
+--- a/include/linux/jhash.h
++++ b/include/linux/jhash.h
+@@ -3,80 +3,95 @@
+ 
+ /* jhash.h: Jenkins hash support.
+  *
+- * Copyright (C) 1996 Bob Jenkins (bob_jenkins@burtleburtle.net)
++ * Copyright (C) 2006. Bob Jenkins (bob_jenkins@burtleburtle.net)
+  *
+  * http://burtleburtle.net/bob/hash/
+  *
+  * These are the credits from Bob's sources:
+  *
+- * lookup2.c, by Bob Jenkins, December 1996, Public Domain.
+- * hash(), hash2(), hash3, and mix() are externally useful functions.
+- * Routines to test the hash are included if SELF_TEST is defined.
+- * You can use this free for any purpose.  It has no warranty.
++ * lookup3.c, by Bob Jenkins, May 2006, Public Domain.
+  *
+- * Copyright (C) 2003 David S. Miller (davem@redhat.com)
++ * These are functions for producing 32-bit hashes for hash table lookup.
++ * hashword(), hashlittle(), hashlittle2(), hashbig(), mix(), and final() 
++ * are externally useful functions.  Routines to test the hash are included 
++ * if SELF_TEST is defined.  You can use this free for any purpose.  It's in
++ * the public domain.  It has no warranty.
++ *
++ * Copyright (C) 2009 Jozsef Kadlecsik (kadlec@blackhole.kfki.hu)
+  *
+  * I've modified Bob's hash to be useful in the Linux kernel, and
+- * any bugs present are surely my fault.  -DaveM
++ * any bugs present are my fault.  Jozsef
+  */
+ 
+-/* NOTE: Arguments are modified. */
+-#define __jhash_mix(a, b, c) \
++#define __rot(x,k) (((x)<<(k)) | ((x)>>(32-(k))))
++
++/* __jhash_mix - mix 3 32-bit values reversibly. */
++#define __jhash_mix(a,b,c) \
++{ \
++  a -= c;  a ^= __rot(c, 4);  c += b; \
++  b -= a;  b ^= __rot(a, 6);  a += c; \
++  c -= b;  c ^= __rot(b, 8);  b += a; \
++  a -= c;  a ^= __rot(c,16);  c += b; \
++  b -= a;  b ^= __rot(a,19);  a += c; \
++  c -= b;  c ^= __rot(b, 4);  b += a; \
++}
++
++/* __jhash_final - final mixing of 3 32-bit values (a,b,c) into c */
++#define __jhash_final(a,b,c) \
+ { \
+-  a -= b; a -= c; a ^= (c>>13); \
+-  b -= c; b -= a; b ^= (a<<8); \
+-  c -= a; c -= b; c ^= (b>>13); \
+-  a -= b; a -= c; a ^= (c>>12);  \
+-  b -= c; b -= a; b ^= (a<<16); \
+-  c -= a; c -= b; c ^= (b>>5); \
+-  a -= b; a -= c; a ^= (c>>3);  \
+-  b -= c; b -= a; b ^= (a<<10); \
+-  c -= a; c -= b; c ^= (b>>15); \
++  c ^= b; c -= __rot(b,14); \
++  a ^= c; a -= __rot(c,11); \
++  b ^= a; b -= __rot(a,25); \
++  c ^= b; c -= __rot(b,16); \
++  a ^= c; a -= __rot(c,4);  \
++  b ^= a; b -= __rot(a,14); \
++  c ^= b; c -= __rot(b,24); \
+ }
+ 
+-/* The golden ration: an arbitrary value */
+-#define JHASH_GOLDEN_RATIO	0x9e3779b9
++/* An arbitrary initial parameter */
++#define JHASH_GOLDEN_RATIO	0xdeadbeef
+ 
+ /* The most generic version, hashes an arbitrary sequence
+  * of bytes.  No alignment or length assumptions are made about
+- * the input key.
++ * the input key. The result depends on endianness.
+  */
+ static inline u32 jhash(const void *key, u32 length, u32 initval)
+ {
+-	u32 a, b, c, len;
++	u32 a,b,c;
+ 	const u8 *k = key;
+ 
+-	len = length;
+-	a = b = JHASH_GOLDEN_RATIO;
+-	c = initval;
+-
+-	while (len >= 12) {
+-		a += (k[0] +((u32)k[1]<<8) +((u32)k[2]<<16) +((u32)k[3]<<24));
+-		b += (k[4] +((u32)k[5]<<8) +((u32)k[6]<<16) +((u32)k[7]<<24));
+-		c += (k[8] +((u32)k[9]<<8) +((u32)k[10]<<16)+((u32)k[11]<<24));
+-
+-		__jhash_mix(a,b,c);
++	/* Set up the internal state */
++	a = b = c = JHASH_GOLDEN_RATIO + length + initval;
+ 
++	/* all but the last block: affect some 32 bits of (a,b,c) */
++	while (length > 12) {
++    		a += (k[0] + ((u32)k[1]<<8) + ((u32)k[2]<<16) + ((u32)k[3]<<24));
++		b += (k[4] + ((u32)k[5]<<8) + ((u32)k[6]<<16) + ((u32)k[7]<<24));
++		c += (k[8] + ((u32)k[9]<<8) + ((u32)k[10]<<16) + ((u32)k[11]<<24));
++		__jhash_mix(a, b, c);
++		length -= 12;
+ 		k += 12;
+-		len -= 12;
+ 	}
+ 
+-	c += length;
+-	switch (len) {
+-	case 11: c += ((u32)k[10]<<24);
+-	case 10: c += ((u32)k[9]<<16);
+-	case 9 : c += ((u32)k[8]<<8);
+-	case 8 : b += ((u32)k[7]<<24);
+-	case 7 : b += ((u32)k[6]<<16);
+-	case 6 : b += ((u32)k[5]<<8);
++	/* last block: affect all 32 bits of (c) */
++	/* all the case statements fall through */
++	switch (length) {
++	case 12: c += (u32)k[11]<<24;
++	case 11: c += (u32)k[10]<<16;
++	case 10: c += (u32)k[9]<<8;
++	case 9 : c += k[8];
++	case 8 : b += (u32)k[7]<<24;
++	case 7 : b += (u32)k[6]<<16;
++	case 6 : b += (u32)k[5]<<8;
+ 	case 5 : b += k[4];
+-	case 4 : a += ((u32)k[3]<<24);
+-	case 3 : a += ((u32)k[2]<<16);
+-	case 2 : a += ((u32)k[1]<<8);
++	case 4 : a += (u32)k[3]<<24;
++	case 3 : a += (u32)k[2]<<16;
++	case 2 : a += (u32)k[1]<<8;
+ 	case 1 : a += k[0];
+-	};
+-
+-	__jhash_mix(a,b,c);
++		__jhash_final(a, b, c);
++	case 0 :
++		break;
++	}
+ 
+ 	return c;
+ }
+@@ -86,58 +101,57 @@ static inline u32 jhash(const void *key,
+  */
+ static inline u32 jhash2(const u32 *k, u32 length, u32 initval)
+ {
+-	u32 a, b, c, len;
++	u32 a, b, c;
+ 
+-	a = b = JHASH_GOLDEN_RATIO;
+-	c = initval;
+-	len = length;
++	/* Set up the internal state */
++	a = b = c = JHASH_GOLDEN_RATIO + (length<<2) + initval;
+ 
+-	while (len >= 3) {
++	/* handle most of the key */
++	while (length > 3) {
+ 		a += k[0];
+ 		b += k[1];
+ 		c += k[2];
+ 		__jhash_mix(a, b, c);
+-		k += 3; len -= 3;
++		length -= 3;
++		k += 3;
+ 	}
+ 
+-	c += length * 4;
+-
+-	switch (len) {
+-	case 2 : b += k[1];
+-	case 1 : a += k[0];
+-	};
+-
+-	__jhash_mix(a,b,c);
++	/* handle the last 3 u32's */
++	/* all the case statements fall through */ 
++	switch (length) {
++	case 3: c += k[2];
++	case 2: b += k[1];
++	case 1: a += k[0];
++		__jhash_final(a, b, c);
++	case 0:     /* case 0: nothing left to add */
++		break;
++	}
+ 
+ 	return c;
+ }
+ 
+-
+ /* A special ultra-optimized versions that knows they are hashing exactly
+  * 3, 2 or 1 word(s).
+- *
+- * NOTE: In partilar the "c += length; __jhash_mix(a,b,c);" normally
+- *       done at the end is not done here.
+  */
+ static inline u32 jhash_3words(u32 a, u32 b, u32 c, u32 initval)
+ {
+-	a += JHASH_GOLDEN_RATIO;
+-	b += JHASH_GOLDEN_RATIO;
+-	c += initval;
++	a += JHASH_GOLDEN_RATIO + initval;
++	b += JHASH_GOLDEN_RATIO + initval;
++	c += JHASH_GOLDEN_RATIO + initval;
+ 
+-	__jhash_mix(a, b, c);
++	__jhash_final(a, b, c);
+ 
+ 	return c;
+ }
+ 
+ static inline u32 jhash_2words(u32 a, u32 b, u32 initval)
+ {
+-	return jhash_3words(a, b, 0, initval);
++	return jhash_3words(0, a, b, initval);
+ }
+ 
+ static inline u32 jhash_1word(u32 a, u32 initval)
+ {
+-	return jhash_3words(a, 0, 0, initval);
++	return jhash_3words(0, 0, a, initval);
+ }
+ 
+ #endif /* _LINUX_JHASH_H */
diff --git a/target/linux/generic/patches-2.6.33/202-mips_mem_functions_performance.patch b/target/linux/generic/patches-2.6.33/202-mips_mem_functions_performance.patch
new file mode 100644
index 0000000000..6ea9ba51ee
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/202-mips_mem_functions_performance.patch
@@ -0,0 +1,83 @@
+--- a/arch/mips/include/asm/string.h
++++ b/arch/mips/include/asm/string.h
+@@ -133,11 +133,44 @@ strncmp(__const__ char *__cs, __const__ 
+ 
+ #define __HAVE_ARCH_MEMSET
+ extern void *memset(void *__s, int __c, size_t __count);
++#define memset(__s, __c, len)					\
++({								\
++	size_t __len = (len);					\
++	void *__ret;						\
++	if (__builtin_constant_p(len) && __len >= 64)		\
++		__ret = memset((__s), (__c), __len);		\
++	else							\
++		__ret = __builtin_memset((__s), (__c), __len);	\
++	__ret;							\
++})
+ 
+ #define __HAVE_ARCH_MEMCPY
+ extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
++#define memcpy(dst, src, len)					\
++({								\
++	size_t __len = (len);					\
++	void *__ret;						\
++	if (__builtin_constant_p(len) && __len >= 64)		\
++		__ret = memcpy((dst), (src), __len);		\
++	else							\
++		__ret = __builtin_memcpy((dst), (src), __len);	\
++	__ret;							\
++})
+ 
+ #define __HAVE_ARCH_MEMMOVE
+ extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
++#define memmove(dst, src, len)					\
++({								\
++	size_t __len = (len);					\
++	void *__ret;						\
++	if (__builtin_constant_p(len) && __len >= 64)		\
++		__ret = memmove((dst), (src), __len);		\
++	else							\
++		__ret = __builtin_memmove((dst), (src), __len);	\
++	__ret;							\
++})
++
++#define __HAVE_ARCH_MEMCMP
++#define memcmp(src1, src2, len) __builtin_memcmp((src1), (src2), (len))
+ 
+ #endif /* _ASM_STRING_H */
+--- a/arch/mips/lib/Makefile
++++ b/arch/mips/lib/Makefile
+@@ -3,7 +3,7 @@
+ #
+ 
+ lib-y	+= csum_partial.o delay.o memcpy.o memcpy-inatomic.o memset.o \
+-	   strlen_user.o strncpy_user.o strnlen_user.o uncached.o
++	   strlen_user.o strncpy_user.o strnlen_user.o uncached.o memcmp.o
+ 
+ obj-y			+= iomap.o
+ obj-$(CONFIG_PCI)	+= iomap-pci.o
+--- /dev/null
++++ b/arch/mips/lib/memcmp.c
+@@ -0,0 +1,22 @@
++/*
++ *  copied from linux/lib/string.c
++ *
++ *  Copyright (C) 1991, 1992  Linus Torvalds
++ */
++
++#include <linux/module.h>
++#include <linux/string.h>
++
++#undef memcmp
++int memcmp(const void *cs, const void *ct, size_t count)
++{
++	const unsigned char *su1, *su2;
++	int res = 0;
++
++	for (su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--)
++		if ((res = *su1 - *su2) != 0)
++			break;
++	return res;
++}
++EXPORT_SYMBOL(memcmp);
++
diff --git a/target/linux/generic/patches-2.6.33/203-slab_maxsize.patch b/target/linux/generic/patches-2.6.33/203-slab_maxsize.patch
new file mode 100644
index 0000000000..0c1ae72a4e
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/203-slab_maxsize.patch
@@ -0,0 +1,13 @@
+--- a/include/linux/slab.h
++++ b/include/linux/slab.h
+@@ -124,8 +124,8 @@ int kmem_ptr_validate(struct kmem_cache 
+  * to do various tricks to work around compiler limitations in order to
+  * ensure proper constant folding.
+  */
+-#define KMALLOC_SHIFT_HIGH	((MAX_ORDER + PAGE_SHIFT - 1) <= 25 ? \
+-				(MAX_ORDER + PAGE_SHIFT - 1) : 25)
++#define KMALLOC_SHIFT_HIGH	((MAX_ORDER + PAGE_SHIFT - 1) <= 17 ? \
++				(MAX_ORDER + PAGE_SHIFT - 1) : 17)
+ 
+ #define KMALLOC_MAX_SIZE	(1UL << KMALLOC_SHIFT_HIGH)
+ #define KMALLOC_MAX_ORDER	(KMALLOC_SHIFT_HIGH - PAGE_SHIFT)
diff --git a/target/linux/generic/patches-2.6.33/204-jffs2_eofdetect.patch b/target/linux/generic/patches-2.6.33/204-jffs2_eofdetect.patch
new file mode 100644
index 0000000000..16d3e1f8e8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/204-jffs2_eofdetect.patch
@@ -0,0 +1,132 @@
+--- a/fs/jffs2/build.c
++++ b/fs/jffs2/build.c
+@@ -111,6 +111,17 @@ static int jffs2_build_filesystem(struct
+ 	dbg_fsbuild("scanned flash completely\n");
+ 	jffs2_dbg_dump_block_lists_nolock(c);
+ 
++	if (c->flags & (1 << 7)) {
++		printk("%s(): unlocking the mtd device... ", __func__);
++		if (c->mtd->unlock)
++			c->mtd->unlock(c->mtd, 0, c->mtd->size);
++		printk("done.\n");
++
++		printk("%s(): erasing all blocks after the end marker... ", __func__);
++		jffs2_erase_pending_blocks(c, -1);
++		printk("done.\n");
++	}
++
+ 	dbg_fsbuild("pass 1 starting\n");
+ 	c->flags |= JFFS2_SB_FLAG_BUILDING;
+ 	/* Now scan the directory tree, increasing nlink according to every dirent found. */
+--- a/fs/jffs2/scan.c
++++ b/fs/jffs2/scan.c
+@@ -72,7 +72,7 @@ static int file_dirty(struct jffs2_sb_in
+ 		return ret;
+ 	if ((ret = jffs2_scan_dirty_space(c, jeb, jeb->free_size)))
+ 		return ret;
+-	/* Turned wasted size into dirty, since we apparently 
++	/* Turned wasted size into dirty, since we apparently
+ 	   think it's recoverable now. */
+ 	jeb->dirty_size += jeb->wasted_size;
+ 	c->dirty_size += jeb->wasted_size;
+@@ -144,8 +144,11 @@ int jffs2_scan_medium(struct jffs2_sb_in
+ 		/* reset summary info for next eraseblock scan */
+ 		jffs2_sum_reset_collected(s);
+ 
+-		ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
+-						buf_size, s);
++		if (c->flags & (1 << 7))
++			ret = BLK_STATE_ALLFF;
++		else
++			ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
++							buf_size, s);
+ 
+ 		if (ret < 0)
+ 			goto out;
+@@ -400,7 +403,7 @@ static int jffs2_scan_xref_node(struct j
+ 	if (!ref)
+ 		return -ENOMEM;
+ 
+-	/* BEFORE jffs2_build_xattr_subsystem() called, 
++	/* BEFORE jffs2_build_xattr_subsystem() called,
+ 	 * and AFTER xattr_ref is marked as a dead xref,
+ 	 * ref->xid is used to store 32bit xid, xd is not used
+ 	 * ref->ino is used to store 32bit inode-number, ic is not used
+@@ -473,7 +476,7 @@ static int jffs2_scan_eraseblock (struct
+ 		struct jffs2_sum_marker *sm;
+ 		void *sumptr = NULL;
+ 		uint32_t sumlen;
+-	      
++
+ 		if (!buf_size) {
+ 			/* XIP case. Just look, point at the summary if it's there */
+ 			sm = (void *)buf + c->sector_size - sizeof(*sm);
+@@ -489,9 +492,9 @@ static int jffs2_scan_eraseblock (struct
+ 				buf_len = sizeof(*sm);
+ 
+ 			/* Read as much as we want into the _end_ of the preallocated buffer */
+-			err = jffs2_fill_scan_buf(c, buf + buf_size - buf_len, 
++			err = jffs2_fill_scan_buf(c, buf + buf_size - buf_len,
+ 						  jeb->offset + c->sector_size - buf_len,
+-						  buf_len);				
++						  buf_len);
+ 			if (err)
+ 				return err;
+ 
+@@ -510,9 +513,9 @@ static int jffs2_scan_eraseblock (struct
+ 				}
+ 				if (buf_len < sumlen) {
+ 					/* Need to read more so that the entire summary node is present */
+-					err = jffs2_fill_scan_buf(c, sumptr, 
++					err = jffs2_fill_scan_buf(c, sumptr,
+ 								  jeb->offset + c->sector_size - sumlen,
+-								  sumlen - buf_len);				
++								  sumlen - buf_len);
+ 					if (err)
+ 						return err;
+ 				}
+@@ -525,7 +528,7 @@ static int jffs2_scan_eraseblock (struct
+ 
+ 			if (buf_size && sumlen > buf_size)
+ 				kfree(sumptr);
+-			/* If it returns with a real error, bail. 
++			/* If it returns with a real error, bail.
+ 			   If it returns positive, that's a block classification
+ 			   (i.e. BLK_STATE_xxx) so return that too.
+ 			   If it returns zero, fall through to full scan. */
+@@ -546,6 +549,17 @@ static int jffs2_scan_eraseblock (struct
+ 			return err;
+ 	}
+ 
++	if ((buf[0] == 0xde) &&
++		(buf[1] == 0xad) &&
++		(buf[2] == 0xc0) &&
++		(buf[3] == 0xde)) {
++		/* end of filesystem. erase everything after this point */
++		printk("%s(): End of filesystem marker found at 0x%x\n", __func__, jeb->offset);
++		c->flags |= (1 << 7);
++
++		return BLK_STATE_ALLFF;
++	}
++
+ 	/* We temporarily use 'ofs' as a pointer into the buffer/jeb */
+ 	ofs = 0;
+ 
+@@ -671,7 +685,7 @@ scan_more:
+ 				scan_end = buf_len;
+ 				goto more_empty;
+ 			}
+-			
++
+ 			/* See how much more there is to read in this eraseblock... */
+ 			buf_len = min_t(uint32_t, buf_size, jeb->offset + c->sector_size - ofs);
+ 			if (!buf_len) {
+@@ -907,7 +921,7 @@ scan_more:
+ 
+ 	D1(printk(KERN_DEBUG "Block at 0x%08x: free 0x%08x, dirty 0x%08x, unchecked 0x%08x, used 0x%08x, wasted 0x%08x\n",
+ 		  jeb->offset,jeb->free_size, jeb->dirty_size, jeb->unchecked_size, jeb->used_size, jeb->wasted_size));
+-	
++
+ 	/* mark_node_obsolete can add to wasted !! */
+ 	if (jeb->wasted_size) {
+ 		jeb->dirty_size += jeb->wasted_size;
diff --git a/target/linux/generic/patches-2.6.33/205-skb_padding.patch b/target/linux/generic/patches-2.6.33/205-skb_padding.patch
new file mode 100644
index 0000000000..0928464ec9
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/205-skb_padding.patch
@@ -0,0 +1,56 @@
+--- a/include/linux/skbuff.h
++++ b/include/linux/skbuff.h
+@@ -1373,11 +1373,18 @@ static inline int skb_network_offset(con
+  *
+  * Various parts of the networking layer expect at least 32 bytes of
+  * headroom, you should not reduce this.
++ *
++ * This has been changed to 64 to acommodate for routing between ethernet
++ * and wireless, but only for new allocations
+  */
+ #ifndef NET_SKB_PAD
+ #define NET_SKB_PAD	32
+ #endif
+ 
++#ifndef NET_SKB_PAD_ALLOC
++#define NET_SKB_PAD_ALLOC	64
++#endif
++
+ extern int ___pskb_trim(struct sk_buff *skb, unsigned int len);
+ 
+ static inline void __skb_trim(struct sk_buff *skb, unsigned int len)
+@@ -1467,9 +1474,9 @@ static inline void __skb_queue_purge(str
+ static inline struct sk_buff *__dev_alloc_skb(unsigned int length,
+ 					      gfp_t gfp_mask)
+ {
+-	struct sk_buff *skb = alloc_skb(length + NET_SKB_PAD, gfp_mask);
++	struct sk_buff *skb = alloc_skb(length + NET_SKB_PAD_ALLOC, gfp_mask);
+ 	if (likely(skb))
+-		skb_reserve(skb, NET_SKB_PAD);
++		skb_reserve(skb, NET_SKB_PAD_ALLOC);
+ 	return skb;
+ }
+ 
+@@ -1552,7 +1559,7 @@ static inline int __skb_cow(struct sk_bu
+ 		delta = headroom - skb_headroom(skb);
+ 
+ 	if (delta || cloned)
+-		return pskb_expand_head(skb, ALIGN(delta, NET_SKB_PAD), 0,
++		return pskb_expand_head(skb, ALIGN(delta, NET_SKB_PAD_ALLOC), 0,
+ 					GFP_ATOMIC);
+ 	return 0;
+ }
+--- a/net/core/skbuff.c
++++ b/net/core/skbuff.c
+@@ -339,9 +339,9 @@ struct sk_buff *__netdev_alloc_skb(struc
+ 	int node = dev->dev.parent ? dev_to_node(dev->dev.parent) : -1;
+ 	struct sk_buff *skb;
+ 
+-	skb = __alloc_skb(length + NET_SKB_PAD, gfp_mask, 0, node);
++	skb = __alloc_skb(length + NET_SKB_PAD_ALLOC, gfp_mask, 0, node);
+ 	if (likely(skb)) {
+-		skb_reserve(skb, NET_SKB_PAD);
++		skb_reserve(skb, NET_SKB_PAD_ALLOC);
+ 		skb->dev = dev;
+ 	}
+ 	return skb;
diff --git a/target/linux/generic/patches-2.6.33/207-powerpc_asm_segment_h.patch b/target/linux/generic/patches-2.6.33/207-powerpc_asm_segment_h.patch
new file mode 100644
index 0000000000..1272e82c75
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/207-powerpc_asm_segment_h.patch
@@ -0,0 +1,9 @@
+--- /dev/null
++++ b/include/asm-powerpc/segment.h
+@@ -0,0 +1,6 @@
++#ifndef _ASM_SEGMENT_H
++#define _ASM_SEGMENT_H
++
++/* Only here because we have some old header files that expect it.. */
++
++#endif /* _ASM_SEGMENT_H */
diff --git a/target/linux/generic/patches-2.6.33/208-mips_oprofile_fix.patch b/target/linux/generic/patches-2.6.33/208-mips_oprofile_fix.patch
new file mode 100644
index 0000000000..0cbf4ed32b
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/208-mips_oprofile_fix.patch
@@ -0,0 +1,48 @@
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -49,7 +49,9 @@ ifneq ($(SUBARCH),$(ARCH))
+ endif
+ 
+ ifndef CONFIG_FUNCTION_TRACER
+-cflags-y := -ffunction-sections
++  ifndef CONFIG_PROFILING
++    cflags-y := -ffunction-sections
++  endif
+ endif
+ ifdef CONFIG_FUNCTION_GRAPH_TRACER
+   ifndef KBUILD_MCOUNT_RA_ADDRESS
+--- a/arch/mips/oprofile/op_model_mipsxx.c
++++ b/arch/mips/oprofile/op_model_mipsxx.c
+@@ -298,6 +298,11 @@ static void reset_counters(void *arg)
+ 	}
+ }
+ 
++static irqreturn_t mipsxx_perfcount_int(int irq, void *dev_id)
++{
++	return mipsxx_perfcount_handler();
++}
++
+ static int __init mipsxx_init(void)
+ {
+ 	int counters;
+@@ -374,6 +379,10 @@ static int __init mipsxx_init(void)
+ 	save_perf_irq = perf_irq;
+ 	perf_irq = mipsxx_perfcount_handler;
+ 
++	if (cp0_perfcount_irq >= 0)
++		return request_irq(cp0_perfcount_irq, mipsxx_perfcount_int,
++			IRQF_SHARED, "Perfcounter", save_perf_irq);
++
+ 	return 0;
+ }
+ 
+@@ -381,6 +390,9 @@ static void mipsxx_exit(void)
+ {
+ 	int counters = op_model_mipsxx_ops.num_counters;
+ 
++	if (cp0_perfcount_irq >= 0)
++		free_irq(cp0_perfcount_irq, save_perf_irq);
++
+ 	counters = counters_per_cpu_to_total(counters);
+ 	on_each_cpu(reset_counters, (void *)(long)counters, 1);
+ 
diff --git a/target/linux/generic/patches-2.6.33/209-mini_fo.patch b/target/linux/generic/patches-2.6.33/209-mini_fo.patch
new file mode 100644
index 0000000000..b2625cd269
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/209-mini_fo.patch
@@ -0,0 +1,7782 @@
+--- a/fs/Kconfig
++++ b/fs/Kconfig
+@@ -180,6 +180,7 @@ source "fs/ubifs/Kconfig"
+ source "fs/cramfs/Kconfig"
+ source "fs/squashfs/Kconfig"
+ source "fs/freevxfs/Kconfig"
++source "fs/mini_fo/Kconfig"
+ source "fs/minix/Kconfig"
+ source "fs/omfs/Kconfig"
+ source "fs/hpfs/Kconfig"
+--- a/fs/Makefile
++++ b/fs/Makefile
+@@ -77,6 +77,7 @@ obj-$(CONFIG_SQUASHFS)		+= squashfs/
+ obj-y				+= ramfs/
+ obj-$(CONFIG_HUGETLBFS)		+= hugetlbfs/
+ obj-$(CONFIG_CODA_FS)		+= coda/
++obj-$(CONFIG_MINI_FO)		+= mini_fo/
+ obj-$(CONFIG_MINIX_FS)		+= minix/
+ obj-$(CONFIG_FAT_FS)		+= fat/
+ obj-$(CONFIG_BFS_FS)		+= bfs/
+--- /dev/null
++++ b/fs/mini_fo/aux.c
+@@ -0,0 +1,577 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++
++/* check if file exists in storage  */
++int exists_in_storage(dentry_t *dentry)
++{
++	check_mini_fo_dentry(dentry);
++	if(dtost(dentry) == MODIFIED || dtost(dentry) == CREATED || dtost(dentry) == DEL_REWRITTEN)
++		return 1;
++	return 0;
++}
++
++/* check if dentry is in an existing state */
++int is_mini_fo_existant(dentry_t *dentry)
++{
++	check_mini_fo_dentry(dentry);
++
++	if(dtost(dentry) == DELETED || dtost(dentry) == NON_EXISTANT)
++		return 0;
++	else
++		return 1;
++}
++
++/*
++ * This function will create a negative storage dentry for
++ * dentry, what is required for many create like options.
++ * It will create the storage structure if necessary.
++ */
++int get_neg_sto_dentry(dentry_t *dentry)
++{
++	int err = 0;
++	unsigned int len;
++	const unsigned char *name;
++
++	if(!dentry ||
++	   !dtopd(dentry) ||
++	   !(dtost(dentry) == UNMODIFIED ||
++	     dtost(dentry) == NON_EXISTANT ||
++	     dtost(dentry) == DELETED)) {
++		printk(KERN_CRIT "mini_fo: get_neg_sto_dentry: invalid dentry passed.\n");
++		err = -1;
++		goto out;
++	}
++	/* Have we got a neg. dentry already? */
++	if(dtohd2(dentry)) {
++		err = 0;
++		goto out;
++	}
++	if(dtost(dentry->d_parent) == UNMODIFIED) {
++		/* build sto struct */
++		err = build_sto_structure(dentry->d_parent->d_parent, dentry->d_parent);
++		if(err ||
++		   dtost(dentry->d_parent) != MODIFIED) {
++			printk(KERN_CRIT "mini_fo: get_neg_sto_dentry: ERROR building sto structure.\n");
++			err = -1;
++			goto out;
++		}
++	}
++
++	len = dentry->d_name.len;
++	name = dentry->d_name.name;
++
++	dtohd2(dentry) =
++		lookup_one_len(name, dtohd2(dentry->d_parent), len);
++
++ out:
++	return err;
++}
++
++int check_mini_fo_dentry(dentry_t *dentry)
++{
++ 	ASSERT(dentry != NULL);
++	ASSERT(dtopd(dentry) != NULL);
++	ASSERT((dtohd(dentry) != NULL) || (dtohd2(dentry) != NULL));
++
++/* 	if(dtost(dentry) == MODIFIED) { */
++/* 		ASSERT(dentry->d_inode != NULL); */
++/* 		ASSERT(dtohd(dentry) != NULL); */
++/* 		ASSERT(dtohd(dentry)->d_inode != NULL); */
++/* 		ASSERT(dtohd2(dentry) != NULL); */
++/* 		ASSERT(dtohd2(dentry)->d_inode != NULL); */
++/* 	} */
++/* 	else if(dtost(dentry) == UNMODIFIED) { */
++/* 		ASSERT(dentry->d_inode != NULL); */
++/* 		ASSERT( */
++/* 	} */
++	return 0;
++}
++
++int check_mini_fo_file(file_t *file)
++{
++	ASSERT(file != NULL);
++	ASSERT(ftopd(file) != NULL);
++	ASSERT(file->f_dentry != NULL);
++
++	/* violent checking, check depending of state and type
++	 *	if(S_ISDIR(file->f_dentry->d_inode->i_mode)) {}
++	 */
++	ASSERT((ftohf(file) != NULL) || (ftohf2(file) != NULL));
++	return 0;
++}
++
++int check_mini_fo_inode(inode_t *inode)
++{
++	ASSERT(inode != NULL);
++	ASSERT(itopd(inode) != NULL);
++	ASSERT((itohi(inode) != NULL) || (itohi2(inode) != NULL));
++	return 0;
++}
++
++/*
++ * will walk a base path as provided by get_mini_fo_bpath and return
++ * the (hopefully ;-) ) positive dentry of the renamed base dir.
++ *
++ * This does some work of path_init.
++ */
++dentry_t *bpath_walk(super_block_t *sb, char *bpath)
++{
++	int err;
++        struct vfsmount *mnt;
++	struct nameidata nd;
++
++	/* be paranoid */
++	if(!bpath || bpath[0] != '/') {
++		printk(KERN_CRIT "mini_fo: bpath_walk: Invalid string.\n");
++		return NULL;
++	}
++	if(!sb || !stopd(sb)) {
++		printk(KERN_CRIT "mini_fo: bpath_walk: Invalid sb.\n");
++		return NULL;
++	}
++
++	/* fix this: how do I reach this lock?
++	 * read_lock(&current->fs->lock); */
++	mnt = mntget(stopd(sb)->hidden_mnt);
++	/* read_unlock(&current->fs->lock); */
++
++	err = vfs_path_lookup(mnt->mnt_root, mnt, bpath+1, 0, &nd);
++
++	/* validate */
++	if (err || !nd.dentry || !nd.dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: bpath_walk: path_walk failed.\n");
++		return NULL;
++	}
++	return nd.dentry;
++}
++
++
++/* returns the full path of the basefile incl. its name */
++int get_mini_fo_bpath(dentry_t *dentry, char **bpath, int *bpath_len)
++{
++	char *buf_walker;
++	int len = 0;
++	dentry_t *sky_walker;
++
++	if(!dentry || !dtohd(dentry)) {
++		printk(KERN_CRIT "mini_fo: get_mini_fo_bpath: invalid dentry passed.\n");
++		return -1;
++	}
++	sky_walker = dtohd(dentry);
++
++	do {
++		len += sky_walker->d_name.len + 1 ; /* 1 for '/' */
++		sky_walker = sky_walker->d_parent;
++	} while(sky_walker != stopd(dentry->d_inode->i_sb)->base_dir_dentry);
++
++	/* 1 to oil the loop */
++	*bpath = (char*)  kmalloc(len + 1, GFP_KERNEL);
++	if(!*bpath) {
++		printk(KERN_CRIT "mini_fo: get_mini_fo_bpath: out of mem.\n");
++		return -1;
++	}
++	buf_walker = *bpath+len; /* put it on last char */
++	*buf_walker = '\n';
++	sky_walker = dtohd(dentry);
++
++	do {
++		buf_walker -= sky_walker->d_name.len;
++		strncpy(buf_walker,
++			sky_walker->d_name.name,
++			sky_walker->d_name.len);
++		*(--buf_walker) = '/';
++		sky_walker = sky_walker->d_parent;
++	} while(sky_walker != stopd(dentry->d_inode->i_sb)->base_dir_dentry);
++
++	/* bpath_len doesn't count newline! */
++	*bpath_len = len;
++ 	return 0;
++}
++
++int mini_fo_cp_cont(dentry_t *tgt_dentry, struct vfsmount *tgt_mnt,
++		    dentry_t *src_dentry, struct vfsmount *src_mnt)
++{
++	void *buf;
++	mm_segment_t old_fs;
++	file_t *tgt_file;
++	file_t *src_file;
++	int bytes, len, tmp, err;
++	err = 0;
++
++	if(!(tgt_dentry->d_inode && src_dentry->d_inode)) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR, neg. dentry passed.\n");
++		err = -EINVAL;
++		goto out;
++	}
++
++	dget(tgt_dentry);
++	dget(src_dentry);
++	mntget(tgt_mnt);
++	mntget(src_mnt);
++
++	/* open file write only */
++	tgt_file = dentry_open(tgt_dentry, tgt_mnt, 0x1);
++	if(!tgt_file || IS_ERR(tgt_file)) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR opening target file.\n");
++		err = PTR_ERR(tgt_file);
++		goto out_err;
++	}
++
++	/* open file read only */
++	src_file = dentry_open(src_dentry, src_mnt, 0x0);
++	if(!src_file || IS_ERR(src_file)) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR opening source file.\n");
++		err = PTR_ERR(src_file);
++
++		/* close target file */
++		fput(tgt_file);
++		goto out_err;
++	}
++
++	/* check if the filesystem(s) support read respective write */
++	if(!src_file->f_op->read || !tgt_file->f_op->write) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR, no fs read or write support.\n");
++		err = -EPERM;
++		goto out_close;
++	}
++
++	/* allocate a page for transfering the data */
++	buf = (void *) __get_free_page(GFP_KERNEL);
++	if(!buf) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR, out of kernel mem.\n");
++		goto out_err;
++	}
++
++	tgt_file->f_pos = 0;
++	src_file->f_pos = 0;
++
++	old_fs = get_fs();
++	set_fs(KERNEL_DS);
++
++	/* Doing this I assume that a read operation will return a full
++	 * buffer while there is still data to read, and a less than
++	 * full buffer when all data has been read.
++	 */
++	bytes = len = PAGE_SIZE;
++	while(bytes == len) {
++		bytes = src_file->f_op->read(src_file, buf, len,
++					     &src_file->f_pos);
++		tmp = tgt_file->f_op->write(tgt_file, buf, bytes,
++					    &tgt_file->f_pos);
++		if(tmp != bytes) {
++			printk(KERN_CRIT "mini_fo_cp_cont: ERROR writing.\n");
++			goto out_close_unset;
++		}
++	}
++
++	free_page((unsigned long) buf);
++	set_fs(old_fs);
++	fput(tgt_file);
++	fput(src_file);
++	goto out;
++
++ out_close_unset:
++	free_page((unsigned long) buf);
++	set_fs(old_fs);
++
++ out_close:
++	fput(tgt_file);
++	fput(src_file);
++
++ out_err:
++	dput(tgt_dentry);
++	dput(src_dentry);
++
++	/* mk: not sure if this need to be done */
++	mntput(tgt_mnt);
++	mntput(src_mnt);
++
++ out:
++	return err;
++}
++
++/* mk:
++ * ndl (no-duplicate list) stuff
++ * This is used in mini_fo_readdir, to save the storage directory contents
++ * and later when reading base, match them against the list in order
++ * to avoid duplicates.
++ */
++
++/* add a file specified by name and len to the ndl
++ * Return values: 0 on success, <0 on failure.
++ */
++int ndl_add_entry(struct readdir_data *rd, const char *name, int len)
++{
++	struct ndl_entry *tmp_entry;
++
++	tmp_entry = (struct ndl_entry *)
++		kmalloc(sizeof(struct ndl_entry), GFP_KERNEL);
++	if(!tmp_entry) {
++                printk(KERN_CRIT "mini_fo: ndl_add_entry: out of mem.\n");
++                return -ENOMEM;
++        }
++        tmp_entry->name = (char*) kmalloc(len, GFP_KERNEL);
++        if(!tmp_entry->name) {
++                printk(KERN_CRIT "mini_fo: ndl_add_entry: out of mem.\n");
++                return -ENOMEM;
++        }
++	strncpy(tmp_entry->name, name, len);
++        tmp_entry->len = len;
++
++        list_add(&tmp_entry->list, &rd->ndl_list);
++        rd->ndl_size++;
++        return 0;
++}
++
++/* delete all list entries and free memory */
++void ndl_put_list(struct readdir_data *rd)
++{
++	struct list_head *tmp;
++	struct ndl_entry *tmp_entry;
++
++	if(rd->ndl_size <= 0)
++		return;
++	while(!list_empty(&rd->ndl_list)) {
++		tmp = rd->ndl_list.next;
++                list_del(tmp);
++                tmp_entry = list_entry(tmp, struct ndl_entry, list);
++		kfree(tmp_entry->name);
++                kfree(tmp_entry);
++        }
++	rd->ndl_size = 0;
++}
++
++/* Check if a file specified by name and len is in the ndl
++ * Return value: 0 if not in list, 1 if file is found in ndl.
++ */
++int ndl_check_entry(struct readdir_data *rd, const char *name, int len)
++{
++	struct list_head *tmp;
++	struct ndl_entry *tmp_entry;
++
++	if(rd->ndl_size <= 0)
++		return 0;
++
++	list_for_each(tmp, &rd->ndl_list) {
++                tmp_entry = list_entry(tmp, struct ndl_entry, list);
++                if(tmp_entry->len != len)
++                        continue;
++                if(!strncmp(tmp_entry->name, name, len))
++                        return 1;
++        }
++        return 0;
++}
++
++/* mk:
++ * Recursive function to create corresponding directorys in the storage fs.
++ * The function will build the storage directorys up to dentry.
++ */
++int build_sto_structure(dentry_t *dir, dentry_t *dentry)
++{
++	int err;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++
++	if(dentry->d_parent != dir) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: invalid parameter or meta data corruption [1].\n");
++		return 1;
++	}
++
++       	if(dtost(dir) != MODIFIED) {
++		err = build_sto_structure(dir->d_parent, dentry->d_parent);
++		if(err)
++			return err;
++	}
++
++	/* ok, coming back again. */
++	check_mini_fo_dentry(dentry);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	if(!hidden_sto_dentry) {
++		/*
++		 * This is the case after creating the first
++		 * hidden_sto_dentry.
++		 * After one negative storage_dentry, all pointers to
++		 * hidden_storage dentries are set to NULL. We need to
++		 * create the negative dentry before we create the storage
++		 * file.
++		 */
++		unsigned int len;
++		const unsigned char *name;
++		len = dtohd(dentry)->d_name.len;
++		name = dtohd(dentry)->d_name.name;
++		hidden_sto_dentry = lookup_one_len(name, dtohd2(dir), len);
++		dtohd2(dentry) = hidden_sto_dentry;
++	}
++
++	/* was:	hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	/* lets be safe */
++	if(dtohd2(dir) != hidden_sto_dir_dentry) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: invalid parameter or meta data corruption [2].\n");
++		return 1;
++	}
++
++	/* check for errors in lock_parent */
++	err = PTR_ERR(hidden_sto_dir_dentry);
++	if(IS_ERR(hidden_sto_dir_dentry)) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: lock_parent failed.\n");
++		return err;
++	}
++
++	err = vfs_mkdir(hidden_sto_dir_dentry->d_inode,
++			hidden_sto_dentry,
++			dir->d_inode->i_mode);
++
++	if(err) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: failed to create storage dir [1].\n");
++		/* was: unlock_dir(dir); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&dir->d_inode->i_mutex);
++#else
++		up(&dir->d_inode->i_sem);
++#endif
++		dput(dir);
++		return err;
++	}
++
++	/* everything ok! */
++	if(!dtohd2(dentry)->d_inode) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: failed to create storage dir [2].\n");
++		/* was: unlock_dir(dir); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&dir->d_inode->i_mutex);
++#else
++		up(&dir->d_inode->i_sem);
++#endif
++		dput(dir);
++		return 1;
++	}
++
++	/* interpose the new inode and set new state */
++	itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++	dtopd(dentry)->state = MODIFIED;
++
++	/* initalize the wol list */
++	itopd(dentry->d_inode)->deleted_list_size = -1;
++	itopd(dentry->d_inode)->renamed_list_size = -1;
++	meta_build_lists(dentry);
++
++	fist_copy_attr_all(dentry->d_inode, itohi2(dentry->d_inode));
++	fist_copy_attr_timesizes(dir->d_inode,
++				 hidden_sto_dir_dentry->d_inode);
++	dir->d_inode->i_nlink++;
++	/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++	return 0;
++}
++
++
++#if 0 /* unused */
++
++/*
++ * Read "len" bytes from "filename" into "buf".
++ * "buf" is in kernel space.
++ */
++int
++mini_fo_read_file(const char *filename, void *buf, int len)
++{
++    file_t *filp;
++    mm_segment_t oldfs;
++    int bytes;
++    /* Chroot? Maybe NULL isn't right here */
++    filp = filp_open(filename, O_RDONLY, 0);
++    if (!filp || IS_ERR(filp)) {
++	printk("mini_fo_read_file err %d\n", (int) PTR_ERR(filp));
++	return -1;  /* or do something else */
++    }
++
++    if (!filp->f_op->read)
++	return -2;  /* file(system) doesn't allow reads */
++
++    /* now read len bytes from offset 0 */
++    filp->f_pos = 0;		/* start offset */
++    oldfs = get_fs();
++    set_fs(KERNEL_DS);
++    bytes = filp->f_op->read(filp, buf, len, &filp->f_pos);
++    set_fs(oldfs);
++
++    /* close the file */
++    fput(filp);
++
++    return bytes;
++}
++
++
++
++/*
++ * Write "len" bytes from "buf" to "filename"
++ * "buf" is in kernel space.
++ */
++int
++mini_fo_write_file(const char *filename, void *buf, int len)
++{
++    file_t *filp;
++    mm_segment_t oldfs;
++    int bytes;
++				/* Chroot? Maybe NULL isn't right here */
++    filp = filp_open(filename, O_RDWR|O_CREAT, 0640);
++    if (!filp || IS_ERR(filp)) {
++	printk("mini_fo_write_file err %d\n", (int) PTR_ERR(filp));
++	return -1;  /* or do something else */
++    }
++
++    if (!filp->f_op->write)
++	return -2;  /* file(system) doesn't allow writes */
++
++    /* now write len bytes from offset 0 */
++    filp->f_pos = 0;		/* start offset */
++    oldfs = get_fs();
++    set_fs(KERNEL_DS);
++    bytes = filp->f_op->write(filp, buf, len, &filp->f_pos);
++    set_fs(oldfs);
++
++    /* close the file */
++    fput(filp);
++
++    return bytes;
++}
++
++#endif /* unused */
++
+--- /dev/null
++++ b/fs/mini_fo/ChangeLog
+@@ -0,0 +1,281 @@
++2006-01-24  Markus Klotzbuecher  <mk@mary.denx.de>
++
++	* Add tons of ugly ifdefs to Ed L. Cashin's mutex patch to
++          retain backwards compatibility.
++
++2006-01-24  Ed L. Cashin <ecashin@coraid.com>
++
++	* Support for the new mutex infrastructure
++	(7892f2f48d165a34b0b8130c8a195dfd807b8cb6)
++
++2005-10-15  Markus Klotzbuecher  <mk@localhost.localdomain>
++
++	* Bugfix for a serious memory leak in mini_fo_follow_link.
++
++2005-09-21  Markus Klotzbuecher  <mk@mary>
++
++	* new release 0.6.1
++
++	* fix of a compiler warning due to changes in 2.6.13
++
++2005-09-21  Klaus Wenninger  <klaus.wenninger@siemens.com>
++
++	* file.c: readdir: fix for a bug that caused directory entries
++          to show up twice when using storage filesystems such as
++          minixfs or pramfs.
++
++2005-06-30  Eric Lammerts <eric@lammerts.org>
++
++	* fix for an oops when overwriting a binary thats beeing
++          executed.
++
++2005-06-09    <mk@mary>
++
++	* Renamed overlay to mini_fo-overlay.
++
++	* Added mini_fo-merge script to allow merging of storage and base
++	after making modifications.
++
++2005-05-22  root  <mk@mary>
++
++	* Added overlay script that allows to easily mount mini_fo ontop
++	of a given base directory
++
++2005-05-10    <mk@mary>
++
++	* inode.c: xattr functions return -EOPNOSUPP instead of
++          -ENOSUPP, what confuses "ls -l"
++
++	* Changed license from LGPL to GPL.
++
++2005-05-08  root  <mk@mary>
++
++	* Makefile: clean it up and added make install and make
++          uninstall.
++
++2005-05-06    <mk@mary>
++
++	* merged devel branch back to main. [v0-6-0-pre3]
++
++	* removed unused files print.c and fist_ioctl. [devel-0-0-18]
++
++	* ioctl: removed fist_ioctl stuff, that is not needed for
++          now.
++
++2005-05-03    <mk@mary>
++
++	* file.c: simplified mini_fo_open and mini_fo_setattr using
++          new state changing functions. [devel-0-0-17]
++
++	* inode.c: Fixed getattr state bug (see below) in 2.4 function
++          mini_fo_inode revalidate.
++
++	* inode.c: found an other bug in mini_fo_getattr. States are not
++	  reliable in this function, as a file can be opened, unlinked and
++	  the getattr function called. This results in a deleted dentry
++	  with an inode. Fix is to ignore states and simply use the inode
++	  available.
++
++2005-04-29    <mk@mary>
++
++	* file.c: Bugfix and cleanup in fasync and fsync. [devel-0-0-16]
++
++	* file.c: do not use mini_fo_lock so the generic version is
++          used (I guess).
++
++	* inode.c: getattr, never call getattr on lower files, as this
++          will cause the inum to change.
++
++	* inode.c: rename_reg_file renamed to rename_nondir, as it
++          doesn't matter as long it't not a dir. Removed all
++          rename_dev_file etc.
++
++	* tagged as devel-0-0-15
++
++	* inode.c: added support for chosing support for extended
++          attrs at compile time by XATTR define in mini_fo.h .
++
++	* inode.c: fixed mini_fo_getattr to use mini_fo inode and not
++          lower again, what avoids inode number changes that confused
++          rm again. This is the proper solution.
++
++2005-04-24    <mk@mary>
++
++	* all files: updated Copyright notive to 2005. [devel-0-0-14]
++
++	* inode.c: fixed mini_fo_getattr to not change the inode
++          number, even if lower files change.
++
++	* super.c: fixed a bug that caused deleted base file to show
++          up suddenly after some time, or after creating a special
++          file. The problem was that after some time or after special
++          file creating sync_sb_inodes is called by the vfs, that
++          called our mini_fo_put_inode. There was (wrongly) called
++          __meta_put_lists, that nuked the lists, although the inode
++          was going to continue its life. Moving __meta_put_lists to
++          mini_fo_clear_inode, where an inode is really destroyed,
++          solved the problem.
++
++
++2005-04-23    <mk@mary>
++
++	* state.c, aux.c: more cleaning up and
++          simplifications. [devel-0-0-13]
++
++	* inode.c: implemented mini_fo_getattr, that was required for
++          2.6 because inode_revalidate has been remove there, and the
++	  old "du" bug returned.
++
++
++2005-04-20    <mk@mary>
++
++	* aux.c: get_neg_sto_dentry(): allow to be called for dentries
++          in state UNMODIFIED, NON_EXISTANT _and_ DELETED.
++
++2005-04-19    <mk@mary>
++
++	* Fixed a bug under 2.6 that caused files deleted via mini_fo
++          not to be deleted properly and therefore the fs filled up
++          untill no memory was left. [devel-0-0-12]
++
++	* Added basic hard link support. This means that creating
++          hardlinks will work, but existing ones will be treated as
++          individual files. [devel-0-0-11]
++
++2005-04-17    <mk@mary>
++
++	* Bugfixes
++
++2005-04-13  root  <mk@mary>
++
++	* Added file state.c for the state transition
++          functions. Doesn't work very well yet, though...
++
++2005-04-12    <mk@mary>
++
++	* Porting to 2.6 started, which is easier than expected, also
++          due to Olivier previous work.
++
++2005-04-08    <mk@mary>
++
++	* Fixed the bug that caused du to return invalid sizes of
++          directory trees. The problem was that
++          mini_fo_inode_revalidate didn't always copy the attributes
++          from the base inode properly.
++
++2005-04-01  Markus Klotzbuecher  <mk@chasey>
++
++	* Merged devel branch back to main trunk and updated the
++          RELEASE notes. This will be 0-6-0-pre1.
++
++2005-03-31  Markus Klotzbuecher  <mk@chasey>
++
++	* Fixed some bugs in rename_reg_file, that only showed up in
++          the kernel compile test. Kernel compiles cleanly ontop of
++          mini_fo, now also make mrproper etc. work. Seems pretty stable.
++
++2005-03-28  Markus Klotzbuecher  <mk@chasey>
++
++	* Many, many directory renaming bugfixes and a lot of other
++          cleanup. Dir renaming seems to work relatively stable.
++
++2005-03-22  Markus Klotzbuecher  <mk@chasey>
++
++	* Finished implementing lightweight directory renaming. Some
++          basic testing indicates it works fine.
++	  Next is to implement testcases for the testsuite and confirm
++          everything is really working ok.
++
++2005-03-18  Markus Klotzbuecher  <mk@chasey>
++
++	* Finished implementing meta.c stuff required for directory
++          renaming.
++
++2005-03-17  Markus Klotzbuecher  <mk@chasey>
++
++	* Fixed all compile warnings + an extremly old bug that
++          somehow crept in while reworking the wol stuff to the META
++          system. Turning on -Werror again... :-)
++
++	* Fixed some bugs in the new rename_reg_file function.
++
++	* Rewrote mini_fo rename and split it into several
++          subfunctions, that handle the different types
++          seperately. Rewrote the regular file function aswell, as it
++          was implemented somewhat inefficient.
++
++2005-03-16  Markus Klotzbuecher  <mk@chasey>
++
++	* Implemented new META subsystem, removed old WOL stuff in favor
++	  if it.
++
++	* After some basic testing everything seems ok...
++
++2005-03-11  Markus Klotzbuecher  <mk@chasey>
++
++	* Renaming a non regular file caused trouble because I always
++	  tried to copy the contents. Now I only do this for regular
++	  files. mini_fo_rename still isn't implemented properly, renaming
++	  of device files, symlinks etc. results in a empty regular file
++	  instead of the proper type.
++
++	* Directory renaming suddenly works! What a surprise! I guess
++          this is because renaming is implemented as making a copy and
++          removing the original. Still this might not work
++          everywhere...
++
++2005-03-09  Markus Klotzbuecher  <mk@chasey>
++
++	* Bugfix, when a mini_fo directory that exists in storage
++  	  (state: MODIFIED, CREATED and DEL_REWRITTEN) is deleted, a
++  	  possibly existing WOL file contained in it needs to be
++  	  deleted too.
++
++	* Starting cleanup: defined state names in order to get rid of
++          the state numbers.
++
++2005-03-08  Markus Klotzbuecher  <mk@chasey>
++
++	* Makefile fix, fist_ioctl was built against wrong sources if ARCH=um
++
++	* Fixed a bug in dentry.c, mini_fo_d_hash. In state 4 =
++          DEL_REWRITTEN the hash was calculated from the base dentry,
++          which was wrong and and caused assertions in
++          __mini_fo_hidden_dentry to fail.
++
++2005-02-21    <mk@mary>
++
++	* Implemented directory deleting (inode.c)
++
++	* main.c: made mini_fo_parse_options a little more robust.
++
++2004-12-22    <mk@mary>
++
++	* Makefile cleanup and uml stuff, removed unneccessary files
++
++	* Created a new and hopefully more informative README
++
++	* CHANGELOG: created a new CHANGELOG and added old entries reversely
++
++
++2004-10-24 Gleb Natapov <gleb@nbase.co.il>
++
++	* Fix: owner and group where not correctly copied from base to
++          storage.
++
++
++2004-10-05 Gleb Natapov <gleb@nbase.co.il>
++
++	* Implementation of fsync, fasync and lock mini_fo functions.
++
++
++2004-09-29 Bob Lee <bob@pantasys.com>
++
++	* Fix of a serious pointer bug
++
++
++2004-09-28 Gleb Natapov <gleb@nbase.co.il>
++
++	* Implementation of mini_fo_mknod and mini_fo_rename, support
++          for device files.
++
+--- /dev/null
++++ b/fs/mini_fo/dentry.c
+@@ -0,0 +1,244 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++
++/*
++ * THIS IS A BOOLEAN FUNCTION: returns 1 if valid, 0 otherwise.
++ */
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_d_revalidate(dentry_t *dentry, struct nameidata *nd)
++#else
++mini_fo_d_revalidate(dentry_t *dentry, int flags)
++#endif
++{
++	int err1 = 1; /* valid = 1, invalid = 0 */
++	int err2 = 1;
++	dentry_t *hidden_dentry;
++	dentry_t *hidden_sto_dentry;
++
++
++	check_mini_fo_dentry(dentry);
++
++	hidden_dentry  = dtohd(dentry);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	if(hidden_dentry &&
++	   hidden_dentry->d_op &&
++	   hidden_dentry->d_op->d_revalidate) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		err1 = hidden_dentry->d_op->d_revalidate(hidden_dentry, nd);
++#else
++		err1 = hidden_dentry->d_op->d_revalidate(hidden_dentry, flags);
++#endif
++	}
++	if(hidden_sto_dentry &&
++	   hidden_sto_dentry->d_op &&
++	   hidden_sto_dentry->d_op->d_revalidate) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		err2 = hidden_sto_dentry->d_op->d_revalidate(hidden_sto_dentry,
++							     nd);
++#else
++		err2 = hidden_sto_dentry->d_op->d_revalidate(hidden_sto_dentry,
++							     flags);
++#endif
++	}
++
++	/* mk: if one of the lower level dentries are valid,
++	 * the mini_fo dentry is too.
++	 */
++	return (err1 || err2);
++}
++
++
++STATIC int
++mini_fo_d_hash(dentry_t *dentry, qstr_t *name)
++{
++	int err = 0;
++	dentry_t *hidden_dentry;
++	dentry_t *hidden_sto_dentry;
++
++	/* hidden_dentry = mini_fo_hidden_dentry(dentry);
++	 * hidden_sto_dentry = mini_fo_hidden_sto_dentry(dentry); */
++
++	/* state 1, 3, 4, 5: build the hash for the storage dentry */
++	if((dtopd(dentry)->state == MODIFIED) ||
++	   (dtopd(dentry)->state == CREATED) ||
++	   (dtopd(dentry)->state == DEL_REWRITTEN) ||
++	   (dtopd(dentry)->state == DELETED)) {
++		hidden_sto_dentry = dtohd2(dentry);
++		if(hidden_sto_dentry &&
++		   hidden_sto_dentry->d_op &&
++		   hidden_sto_dentry->d_op->d_hash) {
++			err = hidden_sto_dentry->d_op->d_hash(hidden_sto_dentry, name);
++		}
++		goto out;
++	}
++	/* state 2: build the hash for the base dentry */
++	if(dtopd(dentry)->state == UNMODIFIED) {
++		hidden_dentry = dtohd(dentry);
++		if(hidden_dentry &&
++		   hidden_dentry->d_op &&
++		   hidden_dentry->d_op->d_hash) {
++			err = hidden_dentry->d_op->d_hash(hidden_dentry, name);
++		}
++		goto out;
++	}
++	/* state 6: build hash for the dentry that exists */
++	if(dtopd(dentry)->state == NON_EXISTANT) {
++		hidden_sto_dentry = dtohd2(dentry);
++		if(hidden_sto_dentry &&
++		   hidden_sto_dentry->d_op &&
++		   hidden_sto_dentry->d_op->d_hash) {
++			err = hidden_sto_dentry->d_op->d_hash(hidden_sto_dentry, name);
++			goto out;
++		}
++		hidden_dentry = dtohd(dentry);
++		if(hidden_dentry &&
++		   hidden_dentry->d_op &&
++		   hidden_dentry->d_op->d_hash) {
++			err = hidden_dentry->d_op->d_hash(hidden_dentry, name);
++			goto out;
++		}
++	}
++
++	printk(KERN_CRIT "mini_fo: d_hash: invalid state detected.\n");
++
++ out:
++	return err;
++}
++
++
++STATIC int
++mini_fo_d_compare(dentry_t *dentry, qstr_t *a, qstr_t *b)
++{
++	int err;
++	dentry_t *hidden_dentry=NULL;
++
++	/* hidden_dentry = mini_fo_hidden_dentry(dentry); */
++	if(dtohd2(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else if(dtohd(dentry))
++		hidden_dentry = dtohd(dentry);
++
++	if (hidden_dentry && hidden_dentry->d_op && hidden_dentry->d_op->d_compare) {
++		err = hidden_dentry->d_op->d_compare(hidden_dentry, a, b);
++	} else {
++		err = ((a->len != b->len) || memcmp(a->name, b->name, b->len));
++	}
++
++	return err;
++}
++
++
++int
++mini_fo_d_delete(dentry_t *dentry)
++{
++	dentry_t *hidden_dentry;
++	dentry_t *hidden_sto_dentry;
++	int err = 0;
++
++	/* this could be a negative dentry, so check first */
++	if (!dtopd(dentry)) {
++		printk(KERN_CRIT "mini_fo_d_delete: negative dentry passed.\n");
++		goto out;
++	}
++	hidden_dentry = dtohd(dentry);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	if(hidden_dentry) {
++		if(hidden_dentry->d_op &&
++		   hidden_dentry->d_op->d_delete) {
++			err = hidden_dentry->d_op->d_delete(hidden_dentry);
++		}
++	}
++	if(hidden_sto_dentry) {
++		if(hidden_sto_dentry->d_op &&
++		   hidden_sto_dentry->d_op->d_delete) {
++			err = hidden_sto_dentry->d_op->d_delete(hidden_sto_dentry);
++		}
++	}
++
++ out:
++	return err;
++}
++
++
++void
++mini_fo_d_release(dentry_t *dentry)
++{
++	dentry_t *hidden_dentry;
++	dentry_t *hidden_sto_dentry;
++
++
++	/* this could be a negative dentry, so check first */
++	if (!dtopd(dentry)) {
++		printk(KERN_CRIT "mini_fo_d_release: no private data.\n");
++		goto out;
++	}
++	hidden_dentry = dtohd(dentry);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	if(hidden_dentry) {
++		/* decrement hidden dentry's counter and free its inode */
++		dput(hidden_dentry);
++	}
++	if(hidden_sto_dentry) {
++                /* decrement hidden dentry's counter and free its inode */
++		dput(hidden_sto_dentry);
++	}
++
++	/* free private data (mini_fo_dentry_info) here */
++	kfree(dtopd(dentry));
++	__dtopd(dentry) = NULL;	/* just to be safe */
++ out:
++	return;
++}
++
++
++/*
++ * we don't really need mini_fo_d_iput, because dentry_iput will call iput() if
++ * mini_fo_d_iput is not defined. We left this implemented for ease of
++ * tracing/debugging.
++ */
++void
++mini_fo_d_iput(dentry_t *dentry, inode_t *inode)
++{
++	iput(inode);
++}
++
++
++struct dentry_operations mini_fo_dops = {
++	d_revalidate:	mini_fo_d_revalidate,
++	d_hash:		mini_fo_d_hash,
++	d_compare:		mini_fo_d_compare,
++	d_release:		mini_fo_d_release,
++	d_delete:		mini_fo_d_delete,
++	d_iput:		mini_fo_d_iput,
++};
+--- /dev/null
++++ b/fs/mini_fo/file.c
+@@ -0,0 +1,713 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++#define ROUND_UP(x) (((x)+sizeof(long)-1) & ~(sizeof(long)-1))
++
++/*******************
++ * File Operations *
++ *******************/
++
++STATIC loff_t
++mini_fo_llseek(file_t *file, loff_t offset, int origin)
++{
++	loff_t err;
++	file_t *hidden_file = NULL;
++
++	if(S_ISDIR(file->f_dentry->d_inode->i_mode)) {
++		/* Check if trying to llseek from a directory */
++		err = -EISDIR;
++		goto out;
++	}
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			hidden_file = ftohf(file);
++		}
++	}
++
++	/* always set hidden position to this one */
++	hidden_file->f_pos = file->f_pos;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	memcpy(&(hidden_file->f_ra),
++	       &(file->f_ra),
++	       sizeof(struct file_ra_state));
++#else
++	if (file->f_reada) { /* update readahead information if needed */
++		hidden_file->f_reada = file->f_reada;
++		hidden_file->f_ramax = file->f_ramax;
++		hidden_file->f_raend = file->f_raend;
++		hidden_file->f_ralen = file->f_ralen;
++		hidden_file->f_rawin = file->f_rawin;
++	}
++#endif
++	if (hidden_file->f_op && hidden_file->f_op->llseek)
++		err = hidden_file->f_op->llseek(hidden_file, offset, origin);
++	else
++		err = generic_file_llseek(hidden_file, offset, origin);
++
++	if (err < 0)
++		goto out;
++
++	if (err != file->f_pos) {
++		file->f_pos = err;
++		// ION maybe this?
++		// 	file->f_pos = hidden_file->f_pos;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++		file->f_reada = 0;
++#endif
++		file->f_version++;
++	}
++
++ out:
++	return err;
++}
++
++
++/* mk: fanout capable */
++STATIC ssize_t
++mini_fo_read(file_t *file, char *buf, size_t count, loff_t *ppos)
++{
++	int err = -EINVAL;
++	file_t *hidden_file = NULL;
++	loff_t pos = *ppos;
++
++	if(S_ISDIR(file->f_dentry->d_inode->i_mode)) {
++		/* Check if trying to read from a directory */
++		/* printk(KERN_CRIT "mini_fo_read: ERROR: trying to read data from a directory.\n"); */
++		err = -EISDIR;
++		goto out;
++	}
++
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			hidden_file = ftohf(file);
++		}
++	}
++
++	if (!hidden_file->f_op || !hidden_file->f_op->read)
++		goto out;
++
++	err = hidden_file->f_op->read(hidden_file, buf, count, &pos);
++	*ppos = pos;
++
++	if (err >= 0) {
++		/* atime should also be updated for reads of size zero or more */
++		fist_copy_attr_atime(file->f_dentry->d_inode,
++				     hidden_file->f_dentry->d_inode);
++	}
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	/*
++	 * MAJOR HACK
++	 * because pread() does not have any way to tell us that it is
++	 * our caller, then we don't know for sure if we have to update
++	 * the file positions.  This hack relies on read() having passed us
++	 * the "real" pointer of its struct file's f_pos field.
++	 */
++	if (ppos == &file->f_pos)
++		hidden_file->f_pos = *ppos = pos;
++	if (hidden_file->f_reada) { /* update readahead information if needed */
++		file->f_reada = hidden_file->f_reada;
++		file->f_ramax = hidden_file->f_ramax;
++		file->f_raend = hidden_file->f_raend;
++		file->f_ralen = hidden_file->f_ralen;
++		file->f_rawin = hidden_file->f_rawin;
++	}
++#else
++	memcpy(&(file->f_ra),&(hidden_file->f_ra),sizeof(struct file_ra_state));
++#endif
++
++ out:
++	return err;
++}
++
++
++/* this mini_fo_write() does not modify data pages! */
++STATIC ssize_t
++mini_fo_write(file_t *file, const char *buf, size_t count, loff_t *ppos)
++{
++	int err = -EINVAL;
++	file_t *hidden_file = NULL;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	loff_t pos = *ppos;
++
++	/* mk: fan out: */
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			/* This is bad! We have no storage file to write to. This
++			 * should never happen because if a file is opened for
++			 * writing, a copy should have been made earlier.
++			 */
++			printk(KERN_CRIT "mini_fo: write : ERROR, no storage file to write.\n");
++			err = -EINVAL;
++			goto out;
++		}
++	}
++
++	inode = file->f_dentry->d_inode;
++	hidden_inode = itohi2(inode);
++	if(!hidden_inode) {
++		printk(KERN_CRIT "mini_fo: write: no sto inode found, not good.\n");
++		goto out;
++	}
++
++	if (!hidden_file->f_op || !hidden_file->f_op->write)
++		goto out;
++
++	/* adjust for append -- seek to the end of the file */
++	if (file->f_flags & O_APPEND)
++		pos = inode->i_size;
++
++	err = hidden_file->f_op->write(hidden_file, buf, count, &pos);
++
++	/*
++	 * copy ctime and mtime from lower layer attributes
++	 * atime is unchanged for both layers
++	 */
++	if (err >= 0)
++		fist_copy_attr_times(inode, hidden_inode);
++
++	*ppos = pos;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	/*
++	 * XXX: MAJOR HACK
++	 *
++	 * because pwrite() does not have any way to tell us that it is
++	 * our caller, then we don't know for sure if we have to update
++	 * the file positions.  This hack relies on write() having passed us
++	 * the "real" pointer of its struct file's f_pos field.
++	 */
++	if (ppos == &file->f_pos)
++		hidden_file->f_pos = *ppos = pos;
++#endif
++	/* update this inode's size */
++	if (pos > inode->i_size)
++		inode->i_size = pos;
++
++ out:
++	return err;
++}
++
++/* Global variable to hold a file_t pointer.
++ * This serves to allow mini_fo_filldir function to know which file is
++ * beeing read, which is required for two reasons:
++ *
++ *   - be able to call wol functions in order to avoid listing deleted
++ *     base files.
++ *   - if we're reading a directory which is in state 1, we need to
++ *     maintain a list (in mini_fo_filldir) of which files allready
++ *     have been copied to userspace,to detect files existing in base
++ *     and storage and not list them twice.
++ */
++filldir_t mini_fo_filldir_orig;
++file_t *mini_fo_filldir_file;
++
++/* mainly copied from fs/readdir.c */
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++mini_fo_filldir(void * __buf, const char * name, int namlen, loff_t offset,
++		  u64 ino, unsigned int d_type)
++#else
++mini_fo_filldir(void * __buf, const char * name, int namlen, loff_t offset,
++		  ino_t ino, unsigned int d_type)
++#endif
++{
++	struct getdents_callback * buf = (struct getdents_callback *) __buf;
++	file_t* file = mini_fo_filldir_file;
++
++	/* In theses states we filter meta files in storage (WOL) */
++	if(file && (dtopd(file->f_dentry)->state == MODIFIED ||
++		    dtopd(file->f_dentry)->state == CREATED ||
++		    dtopd(file->f_dentry)->state == DEL_REWRITTEN)) {
++
++		int tmp = strlen(META_FILENAME);
++		if(tmp  == namlen) {
++			if(!strncmp(name, META_FILENAME, namlen))
++				return 0;
++		}
++	}
++
++	/* check if we are merging the contents of storage and base */
++	if(file && dtopd(file->f_dentry)->state == MODIFIED) {
++		/* check if we are still reading storage contents, if
++		 * yes, we just save the name of the file for duplicate
++		 * checking later. */
++
++		if(!ftopd(file)->rd.sto_done) {
++			/* put file into ndl list */
++			if(ndl_add_entry(&ftopd(file)->rd, name, namlen))
++				printk(KERN_CRIT "mini_fo_filldir: Error adding to ndl.\n");
++		} else {
++			/* check if file has been deleted */
++			if(meta_check_d_entry(file->f_dentry, name, namlen))
++				return 0;
++
++			/* do duplicate checking */
++			if(ndl_check_entry(&ftopd(file)->rd, name, namlen))
++				return 0;
++		}
++	}
++
++	return mini_fo_filldir_orig(buf, name, namlen, offset, ino, d_type);
++}
++
++
++STATIC int
++mini_fo_readdir(file_t *file, void *dirent, filldir_t filldir)
++{
++	int err = 0;/* mk: ??? -ENOTDIR; */
++	file_t *hidden_file = NULL;
++	file_t *hidden_sto_file = NULL;
++	inode_t *inode;
++	struct getdents_callback *buf;
++	int oldcount;
++
++#if defined(FIST_FILTER_NAME) || defined(FIST_FILTER_SCA)
++	struct mini_fo_getdents_callback buf;
++#endif /* FIST_FILTER_NAME || FIST_FILTER_SCA */
++
++	buf = (struct getdents_callback *) dirent;
++	oldcount = buf->count;
++	inode = file->f_dentry->d_inode;
++	mini_fo_filldir_file = file;
++	mini_fo_filldir_orig = filldir;
++
++	ftopd(file)->rd.sto_done = 0;
++	do {
++		if (ftopd(file) != NULL) {
++			if(ftohf2(file)) {
++				hidden_sto_file = ftohf2(file);
++				err = vfs_readdir(hidden_sto_file, mini_fo_filldir, dirent);
++				file->f_pos = hidden_sto_file->f_pos;
++				if (err > 0)
++					fist_copy_attr_atime(inode, hidden_sto_file->f_dentry->d_inode);
++				/* not finshed yet, we'll be called again */
++				if (buf->count != oldcount)
++					break;
++			}
++
++			ftopd(file)->rd.sto_done = 1;
++
++			if(ftohf(file)) {
++				hidden_file = ftohf(file);
++				err = vfs_readdir(hidden_file, mini_fo_filldir, dirent);
++				file->f_pos = hidden_file->f_pos;
++				if (err > 0)
++					fist_copy_attr_atime(inode, hidden_file->f_dentry->d_inode);
++			}
++
++		}
++	} while (0);
++
++	/* mk:
++	 * we need to check if all the directory data has been copied to userspace,
++	 * or if we will be called again by userspace to complete the operation.
++	 */
++	if(buf->count == oldcount) {
++		ndl_put_list(&ftopd(file)->rd);
++	}
++
++	/* unset this, safe */
++	mini_fo_filldir_file = NULL;
++	return err;
++}
++
++
++STATIC unsigned int
++mini_fo_poll(file_t *file, poll_table *wait)
++{
++	unsigned int mask = DEFAULT_POLLMASK;
++	file_t *hidden_file = NULL;
++
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			hidden_file = ftohf(file);
++		}
++	}
++
++	if (!hidden_file->f_op || !hidden_file->f_op->poll)
++		goto out;
++
++	mask = hidden_file->f_op->poll(hidden_file, wait);
++
++ out:
++	return mask;
++}
++
++/* FIST-LITE special version of mmap */
++STATIC int
++mini_fo_mmap(file_t *file, vm_area_t *vma)
++{
++	int err = 0;
++	file_t *hidden_file = NULL;
++
++	/* fanout capability */
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			hidden_file = ftohf(file);
++		}
++	}
++
++	ASSERT(hidden_file != NULL);
++	ASSERT(hidden_file->f_op != NULL);
++	ASSERT(hidden_file->f_op->mmap != NULL);
++
++	vma->vm_file = hidden_file;
++	err = hidden_file->f_op->mmap(hidden_file, vma);
++	get_file(hidden_file); /* make sure it doesn't get freed on us */
++	fput(file);	       /* no need to keep extra ref on ours */
++
++	return err;
++}
++
++
++
++STATIC int
++mini_fo_open(inode_t *inode, file_t *file)
++{
++	int err = 0;
++ 	int hidden_flags;
++	file_t *hidden_file = NULL;
++	dentry_t *hidden_dentry = NULL;
++
++	/* fanout stuff */
++	file_t *hidden_sto_file = NULL;
++	dentry_t *hidden_sto_dentry = NULL;
++
++	__ftopd(file) =
++		kmalloc(sizeof(struct mini_fo_file_info), GFP_KERNEL);
++	if (!ftopd(file)) {
++		err = -ENOMEM;
++		goto out;
++	}
++
++	/* init the readdir_helper structure */
++	INIT_LIST_HEAD(&ftopd(file)->rd.ndl_list);
++	ftopd(file)->rd.ndl_size = 0;
++
++	/* In certain paths this could stay uninitalized and cause trouble */
++	ftohf(file) = NULL;
++	ftohf2(file) = NULL;
++	hidden_flags = file->f_flags;
++
++	/* create storage files? */
++	if(dtost(file->f_dentry) == UNMODIFIED) {
++		if(!IS_WRITE_FLAG(file->f_flags)) {
++			hidden_dentry = dtohd(file->f_dentry);
++			dget(hidden_dentry);
++			/* dentry_open will decrement mnt refcnt if err.
++			 * otherwise fput() will do an mntput() for us upon file close. */
++			mntget(stopd(inode->i_sb)->hidden_mnt);
++			hidden_file = dentry_open(hidden_dentry,
++						  stopd(inode->i_sb)->hidden_mnt,
++						  hidden_flags);
++			if (IS_ERR(hidden_file)) {
++				err = PTR_ERR(hidden_file);
++				dput(hidden_dentry);
++				goto out;
++			}
++			ftohf(file) = hidden_file;	/* link two files */
++			goto out;
++		}
++		else {
++			if(S_ISDIR(file->f_dentry->d_inode->i_mode)) {
++				err = dir_unmod_to_mod(file->f_dentry);
++			} else
++				err = nondir_unmod_to_mod(file->f_dentry, 1);
++
++			if (err) {
++				printk("mini_fo_open: ERROR creating storage file.\n");
++				goto out;
++			}
++		}
++	}
++	hidden_sto_dentry = dtohd2(file->f_dentry);
++	dget(hidden_sto_dentry);
++
++	if(dtopd(file->f_dentry)->state == MODIFIED) {
++		/* Directorys are special, interpose on both lower level files */
++		if(S_ISDIR(itohi(inode)->i_mode)) {
++			/* check for invalid file types of lower level files */
++			if(!(S_ISDIR(itohi(inode)->i_mode) && S_ISDIR(itohi2(inode)->i_mode))) {
++				printk(KERN_CRIT "mini_fo_open: meta data corruption detected.\n");
++				dput(hidden_sto_dentry);
++				err = -EINVAL;
++				goto out;
++			}
++
++			/* lower level directorys are ok, open the base file */
++			hidden_dentry = dtohd(file->f_dentry);
++			dget(hidden_dentry);
++
++			mntget(stopd(inode->i_sb)->hidden_mnt);
++			hidden_file = dentry_open(hidden_dentry,
++						  stopd(inode->i_sb)->hidden_mnt,
++						  hidden_flags);
++			if (IS_ERR(hidden_file)) {
++				err = PTR_ERR(hidden_file);
++				dput(hidden_dentry);
++				dput(hidden_sto_dentry);
++				goto out;
++			}
++			ftohf(file) = hidden_file; /* link the two files */
++		}
++	}
++
++	if(!exists_in_storage(file->f_dentry)) {
++		printk(KERN_CRIT "mini_fo_open: invalid file state detected.\n");
++		err = -EINVAL;
++		dput(hidden_sto_dentry);
++
++		/* If the base file has been opened, we need to close it here */
++		if(ftohf(file)) {
++			if (hidden_file->f_op && hidden_file->f_op->flush)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++				hidden_file->f_op->flush(hidden_file, NULL);
++#else
++				hidden_file->f_op->flush(hidden_file);
++#endif
++			dput(hidden_dentry);
++		}
++		goto out;
++	}
++
++	/* ok, now we can safely open the storage file */
++	mntget(stopd(inode->i_sb)->hidden_mnt2);
++	hidden_sto_file = dentry_open(hidden_sto_dentry,
++				      stopd(inode->i_sb)->hidden_mnt2,
++				      hidden_flags);
++
++	/* dentry_open dputs the dentry if it fails */
++	if (IS_ERR(hidden_sto_file)) {
++		err = PTR_ERR(hidden_sto_file);
++		/* close base file if open */
++		if(ftohf(file)) {
++			if (hidden_file->f_op && hidden_file->f_op->flush)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++				hidden_file->f_op->flush(hidden_file, NULL);
++#else
++				hidden_file->f_op->flush(hidden_file);
++#endif
++			dput(hidden_dentry);
++		}
++		goto out;
++	}
++	ftohf2(file) = hidden_sto_file; /* link storage file */
++
++ out:
++	if (err < 0 && ftopd(file)) {
++		kfree(ftopd(file));
++	}
++	return err;
++}
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++mini_fo_flush(file_t *file, fl_owner_t id)
++#else
++mini_fo_flush(file_t *file)
++#endif
++{
++	int err1 = 0;		/* assume ok (see open.c:close_fp) */
++	int err2 = 0;
++	file_t *hidden_file = NULL;
++
++	check_mini_fo_file(file);
++
++	/* mk: we don't do any state checking here, as its not worth the time.
++	 * Just flush the lower level files if they exist.
++	 */
++	if(ftopd(file) != NULL) {
++		if(ftohf(file) != NULL) {
++			hidden_file = ftohf(file);
++			if (hidden_file->f_op && hidden_file->f_op->flush)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++				err1 = hidden_file->f_op->flush(hidden_file, id);
++#else
++				err1 = hidden_file->f_op->flush(hidden_file);
++#endif
++		}
++		if(ftohf2(file) != NULL) {
++			hidden_file = ftohf2(file);
++			if (hidden_file->f_op && hidden_file->f_op->flush)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++				err2 = hidden_file->f_op->flush(hidden_file, id);
++#else
++				err2 = hidden_file->f_op->flush(hidden_file);
++#endif
++		}
++	}
++	return (err1 | err2);
++}
++
++
++STATIC int
++mini_fo_release(inode_t *inode, file_t *file)
++{
++	int err = 0;
++	file_t *hidden_file = NULL;
++
++	if (ftopd(file) != NULL) {
++		if(ftohf(file)) {
++			hidden_file = ftohf(file);
++			fput(hidden_file);
++		}
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++			fput(hidden_file);
++		}
++		kfree(ftopd(file));
++	}
++	return err;
++}
++
++STATIC int
++mini_fo_fsync(file_t *file, dentry_t *dentry, int datasync)
++{
++	int err1 = 0;
++	int err2 = 0;
++	file_t *hidden_file = NULL;
++	dentry_t *hidden_dentry;
++
++	check_mini_fo_file(file);
++
++	if ((hidden_file = ftohf(file)) != NULL) {
++		hidden_dentry = dtohd(dentry);
++		if (hidden_file->f_op && hidden_file->f_op->fsync) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++			mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++			down(&hidden_dentry->d_inode->i_sem);
++#endif
++			err1 = hidden_file->f_op->fsync(hidden_file, hidden_dentry, datasync);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++			mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++			up(&hidden_dentry->d_inode->i_sem);
++#endif
++		}
++	}
++
++	if ((hidden_file = ftohf2(file)) != NULL) {
++		hidden_dentry = dtohd2(dentry);
++		if (hidden_file->f_op && hidden_file->f_op->fsync) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++			mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++			down(&hidden_dentry->d_inode->i_sem);
++#endif
++			err2 = hidden_file->f_op->fsync(hidden_file, hidden_dentry, datasync);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++			mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++			up(&hidden_dentry->d_inode->i_sem);
++#endif
++		}
++	}
++	else
++		goto err;
++
++err:
++	return (err1 || err2);
++}
++
++
++STATIC int
++mini_fo_fasync(int fd, file_t *file, int flag)
++{
++	int err1 = 0;
++	int err2 = 0;
++
++	file_t *hidden_file = NULL;
++
++	check_mini_fo_file(file);
++
++	if((hidden_file = ftohf(file)) != NULL) {
++		err1 = hidden_file->f_op->fasync(fd, hidden_file, flag);
++	}
++	if((hidden_file = ftohf2(file)) != NULL) {
++		err2 = hidden_file->f_op->fasync(fd, hidden_file, flag);
++	}
++
++	return (err1 || err2);
++}
++
++
++
++struct file_operations mini_fo_dir_fops =
++	{
++		read:	generic_read_dir,
++		write:	mini_fo_write,
++		readdir: mini_fo_readdir,
++		poll:	mini_fo_poll,
++		/* ioctl:	mini_fo_ioctl, */
++		mmap:	mini_fo_mmap,
++		open:	mini_fo_open,
++		flush:	mini_fo_flush,
++		release: mini_fo_release,
++		fsync:	mini_fo_fsync,
++		fasync:	mini_fo_fasync,
++		/* not needed lock:	mini_fo_lock, */
++		/* not needed: readv */
++		/* not needed: writev */
++		/* not implemented: sendpage */
++		/* not implemented: get_unmapped_area */
++	};
++
++struct file_operations mini_fo_main_fops =
++	{
++		llseek:	mini_fo_llseek,
++		read:	mini_fo_read,
++		write:	mini_fo_write,
++		readdir: mini_fo_readdir,
++		poll:	mini_fo_poll,
++		/* ioctl:	mini_fo_ioctl, */
++		mmap:	mini_fo_mmap,
++		open:	mini_fo_open,
++		flush:	mini_fo_flush,
++		release: mini_fo_release,
++		fsync:	mini_fo_fsync,
++		fasync:	mini_fo_fasync,
++		/* not needed: lock:	mini_fo_lock, */
++		/* not needed: readv */
++		/* not needed: writev */
++		/* not implemented: sendpage */
++		/* not implemented: get_unmapped_area */
++	};
+--- /dev/null
++++ b/fs/mini_fo/fist.h
+@@ -0,0 +1,254 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++
++/*
++ *  $Id$
++ */
++
++#ifndef __FIST_H_
++#define __FIST_H_
++
++/*
++ * KERNEL ONLY CODE:
++ */
++#ifdef __KERNEL__
++#include <linux/version.h>
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,33)
++#include <generated/autoconf.h>
++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19)
++#include <linux/autoconf.h>
++#else
++#include <linux/config.h>
++#endif
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++#ifdef CONFIG_MODVERSIONS
++# define MODVERSIONS
++# include <linux/modversions.h>
++#endif /* CONFIG_MODVERSIONS */
++#endif /* KERNEL_VERSION < 2.6.0 */
++#include <linux/sched.h>
++#include <linux/kernel.h>
++#include <linux/mm.h>
++#include <linux/string.h>
++#include <linux/stat.h>
++#include <linux/errno.h>
++#include <linux/wait.h>
++#include <linux/limits.h>
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++#include <linux/locks.h>
++#else
++#include <linux/buffer_head.h>
++#include <linux/pagemap.h>
++#include <linux/namei.h>
++#include <linux/module.h>
++#include <linux/mount.h>
++#include <linux/page-flags.h>
++#include <linux/writeback.h>
++#include <linux/statfs.h>
++#endif
++#include <linux/smp.h>
++#include <linux/smp_lock.h>
++#include <linux/file.h>
++#include <linux/slab.h>
++#include <linux/vmalloc.h>
++#include <linux/poll.h>
++#include <linux/list.h>
++#include <linux/init.h>
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20)
++#include <linux/xattr.h>
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#include <linux/security.h>
++#endif
++
++#include <linux/swap.h>
++
++#include <asm/system.h>
++/* #include <asm/segment.h> */
++#include <asm/mman.h>
++#include <linux/seq_file.h>
++
++/*
++ * MACROS:
++ */
++
++/* those mapped to ATTR_* were copied from linux/fs.h */
++#define FA_MODE		ATTR_MODE
++#define FA_UID		ATTR_UID
++#define FA_GID		ATTR_GID
++#define FA_SIZE		ATTR_SIZE
++#define FA_ATIME	ATTR_ATIME
++#define FA_MTIME	ATTR_MTIME
++#define FA_CTIME	ATTR_CTIME
++#define FA_ATIME_SET	ATTR_ATIME_SET
++#define FA_MTIME_SET	ATTR_MTIME_SET
++#define FA_FORCE	ATTR_FORCE
++#define FA_ATTR_FLAGS	ATTR_ATTR_FLAG
++
++/* must be greater than all other ATTR_* flags! */
++#define FA_NLINK	2048
++#define FA_BLKSIZE	4096
++#define FA_BLOCKS	8192
++#define FA_TIMES	(FA_ATIME|FA_MTIME|FA_CTIME)
++#define FA_ALL		0
++
++/* macros to manage changes between kernels */
++#define INODE_DATA(i)	(&(i)->i_data)
++
++#define MIN(x,y) ((x < y) ? (x) : (y))
++#define MAX(x,y) ((x > y) ? (x) : (y))
++#define MAXPATHLEN PATH_MAX
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,5)
++# define lookup_one_len(a,b,c) lookup_one(a,b)
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,4,5) */
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,8)
++# define generic_file_llseek default_llseek
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,4,8) */
++
++#ifndef SEEK_SET
++# define SEEK_SET 0
++#endif /* not SEEK_SET */
++
++#ifndef SEEK_CUR
++# define SEEK_CUR 1
++#endif /* not SEEK_CUR */
++
++#ifndef SEEK_END
++# define SEEK_END 2
++#endif /* not SEEK_END */
++
++#ifndef DEFAULT_POLLMASK
++# define DEFAULT_POLLMASK (POLLIN | POLLOUT | POLLRDNORM | POLLWRNORM)
++#endif /* not DEFAULT_POLLMASK */
++
++/* XXX: fix this so fistgen generates kfree() code directly */
++#define kfree_s(a,b) kfree(a)
++
++/*
++ * TYPEDEFS:
++ */
++typedef struct dentry dentry_t;
++typedef struct file file_t;
++typedef struct inode inode_t;
++typedef inode_t vnode_t;
++typedef struct page page_t;
++typedef struct qstr qstr_t;
++typedef struct super_block super_block_t;
++typedef super_block_t vfs_t;
++typedef struct vm_area_struct vm_area_t;
++
++
++/*
++ * EXTERNALS:
++ */
++
++#define FPPF(str,page) printk("PPF %s 0x%x/%d: Lck:%d Err:%d Ref:%d Upd:%d Other::%d:%d:%d:%d:\n", \
++		str, \
++		(int) page, \
++		(int) page->index, \
++		(PageLocked(page) ? 1 : 0), \
++		(PageError(page) ? 1 : 0), \
++		(PageReferenced(page) ? 1 : 0), \
++		(Page_Uptodate(page) ? 1 : 0), \
++		(PageDecrAfter(page) ? 1 : 0), \
++		(PageSlab(page) ? 1 : 0), \
++		(PageSwapCache(page) ? 1 : 0), \
++		(PageReserved(page) ? 1 : 0) \
++		)
++#define EZKDBG printk("EZK %s:%d:%s\n",__FILE__,__LINE__,__FUNCTION__)
++#if 0
++# define EZKDBG1 printk("EZK %s:%d\n",__FILE__,__LINE__)
++#else
++# define EZKDBG1
++#endif
++
++extern int fist_get_debug_value(void);
++extern int fist_set_debug_value(int val);
++#if 0 /* mini_fo doesn't need these */
++extern void fist_dprint_internal(int level, char *str,...);
++extern void fist_print_dentry(char *str, const dentry_t *dentry);
++extern void fist_print_inode(char *str, const inode_t *inode);
++extern void fist_print_file(char *str, const file_t *file);
++extern void fist_print_buffer_flags(char *str, struct buffer_head *buffer);
++extern void fist_print_page_flags(char *str, page_t *page);
++extern void fist_print_page_bytes(char *str, page_t *page);
++extern void fist_print_pte_flags(char *str, const page_t *page);
++extern void fist_checkinode(inode_t *inode, char *msg);
++extern void fist_print_sb(char *str, const super_block_t *sb);
++
++/* §$% by mk: special debug functions */
++extern void fist_mk_print_dentry(char *str, const dentry_t *dentry);
++extern void fist_mk_print_inode(char *str, const inode_t *inode);
++
++extern char *add_indent(void);
++extern char *del_indent(void);
++#endif/* mini_fo doesn't need these */
++
++
++#define STATIC
++#define ASSERT(EX)	\
++do {	\
++    if (!(EX)) {	\
++	printk(KERN_CRIT "ASSERTION FAILED: %s at %s:%d (%s)\n", #EX,	\
++	       __FILE__, __LINE__, __FUNCTION__);	\
++	(*((char *)0))=0;	\
++    }	\
++} while (0)
++/* same ASSERT, but tell me who was the caller of the function */
++#define ASSERT2(EX)	\
++do {	\
++    if (!(EX)) {	\
++	printk(KERN_CRIT "ASSERTION FAILED (caller): %s at %s:%d (%s)\n", #EX,	\
++	       file, line, func);	\
++	(*((char *)0))=0;	\
++    }	\
++} while (0)
++
++#if 0 /* mini_fo doesn't need these */
++#define dprintk(format, args...) printk(KERN_DEBUG format, ##args)
++#define fist_dprint(level, str, args...) fist_dprint_internal(level, KERN_DEBUG str, ## args)
++#define print_entry_location() fist_dprint(4, "%sIN:  %s %s:%d\n", add_indent(), __FUNCTION__, __FILE__, __LINE__)
++#define print_exit_location() fist_dprint(4, "%s OUT: %s %s:%d\n", del_indent(), __FUNCTION__, __FILE__, __LINE__)
++#define print_exit_status(status) fist_dprint(4, "%s OUT: %s %s:%d, STATUS: %d\n", del_indent(), __FUNCTION__, __FILE__, __LINE__, status)
++#define print_exit_pointer(status) \
++do { \
++  if (IS_ERR(status)) \
++    fist_dprint(4, "%s OUT: %s %s:%d, RESULT: %ld\n", del_indent(), __FUNCTION__, __FILE__, __LINE__, PTR_ERR(status)); \
++  else \
++    fist_dprint(4, "%s OUT: %s %s:%d, RESULT: 0x%x\n", del_indent(), __FUNCTION__, __FILE__, __LINE__, PTR_ERR(status)); \
++} while (0)
++#endif/* mini_fo doesn't need these */
++
++#endif /* __KERNEL__ */
++
++
++/*
++ * DEFINITIONS FOR USER AND KERNEL CODE:
++ * (Note: ioctl numbers 1--9 are reserved for fistgen, the rest
++ *  are auto-generated automatically based on the user's .fist file.)
++ */
++# define FIST_IOCTL_GET_DEBUG_VALUE	_IOR(0x15, 1, int)
++# define FIST_IOCTL_SET_DEBUG_VALUE	_IOW(0x15, 2, int)
++
++#endif /* not __FIST_H_ */
+--- /dev/null
++++ b/fs/mini_fo/inode.c
+@@ -0,0 +1,1564 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_create(inode_t *dir, dentry_t *dentry, int mode, struct nameidata *nd)
++#else
++mini_fo_create(inode_t *dir, dentry_t *dentry, int mode)
++#endif
++{
++	int err = 0;
++
++	check_mini_fo_dentry(dentry);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	err = create_sto_reg_file(dentry, mode, nd);
++#else
++	err = create_sto_reg_file(dentry, mode);
++#endif
++	check_mini_fo_dentry(dentry);
++	return err;
++}
++
++
++STATIC dentry_t *
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_lookup(inode_t *dir, dentry_t *dentry, struct nameidata* nd)
++#else
++mini_fo_lookup(inode_t *dir, dentry_t *dentry)
++#endif
++{
++	int err = 0;
++	dentry_t *hidden_dir_dentry;
++	dentry_t *hidden_dentry = NULL;
++
++	dentry_t *hidden_sto_dir_dentry;
++	dentry_t *hidden_sto_dentry = NULL;
++
++	/* whiteout flag */
++	int del_flag = 0;
++	char *bpath = NULL;
++
++	const char *name;
++	unsigned int namelen;
++
++	/* Don't allow lookups of META-files */
++	namelen = strlen(META_FILENAME);
++	if(namelen == dentry->d_name.len) {
++		if(!strncmp(dentry->d_name.name, META_FILENAME, namelen)) {
++			err = -ENOENT;
++			goto out;
++		}
++	}
++
++	hidden_dir_dentry = dtohd(dentry->d_parent);
++	hidden_sto_dir_dentry = dtohd2(dentry->d_parent);
++
++	name = dentry->d_name.name;
++	namelen = dentry->d_name.len;
++
++	/* must initialize dentry operations */
++	dentry->d_op = &mini_fo_dops;
++
++	/* setup the del_flag */
++	del_flag = __meta_check_d_entry(dir, name, namelen);
++	bpath = __meta_check_r_entry(dir, name, namelen);
++
++	/* perform the lookups of base and storage files:
++	 *
++	 * This caused some serious trouble, as a lookup_one_len passing
++	 * a negative dentry oopses. Solution is to only do the lookup
++	 * if the dentry is positive, else we set it to NULL
++	 * More trouble, who said a *_dir_dentry can't be NULL?
++	 */
++	if(bpath) {
++		/* Cross-Interposing (C), yeah! */
++		hidden_dentry = bpath_walk(dir->i_sb, bpath);
++		if(!hidden_dentry || !hidden_dentry->d_inode) {
++			printk(KERN_CRIT "mini_fo_lookup: bpath_walk failed.\n");
++			err= -EINVAL;
++			goto out;
++		}
++
++		/* this can be set up safely without fear of spaghetti
++		 * interposing as it is only used for copying times */
++		hidden_dir_dentry = hidden_dentry->d_parent;
++		kfree(bpath);
++	}
++	else if(hidden_dir_dentry && hidden_dir_dentry->d_inode)
++		hidden_dentry =
++			lookup_one_len(name, hidden_dir_dentry, namelen);
++	else
++		hidden_dentry = NULL;
++
++	if(hidden_sto_dir_dentry && hidden_sto_dir_dentry->d_inode)
++		hidden_sto_dentry =
++			lookup_one_len(name, hidden_sto_dir_dentry, namelen);
++	else
++		hidden_sto_dentry =  NULL;
++
++	/* catch error in lookup */
++	if (IS_ERR(hidden_dentry) || IS_ERR(hidden_sto_dentry)) {
++		/* mk: we need to call dput on the dentry, whose
++		 * lookup_one_len operation failed, in order to avoid
++		 * unmount trouble.
++		 */
++		if(IS_ERR(hidden_dentry)) {
++			printk(KERN_CRIT "mini_fo_lookup: ERR from base dentry, lookup failed.\n");
++			err = PTR_ERR(hidden_dentry);
++		} else {
++			dput(hidden_dentry);
++		}
++		if(IS_ERR(hidden_sto_dentry)) {
++			printk(KERN_CRIT "mini_fo_lookup: ERR from storage dentry, lookup failed.\n");
++			err = PTR_ERR(hidden_sto_dentry);
++		} else {
++			dput(hidden_sto_dentry);
++		}
++		goto out;
++	}
++
++	/* allocate dentry private data */
++	__dtopd(dentry) = (struct mini_fo_dentry_info *)
++		kmalloc(sizeof(struct mini_fo_dentry_info), GFP_KERNEL);
++
++	if (!dtopd(dentry)) {
++		err = -ENOMEM;
++		goto out_dput;
++	}
++
++	/* check for different states of the mini_fo file to be looked up. */
++
++	/* state 1, file has been modified */
++	if(hidden_dentry && hidden_sto_dentry &&
++	   hidden_dentry->d_inode && hidden_sto_dentry->d_inode && !del_flag) {
++
++		/* update parent directory's atime */
++		fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode);
++
++		dtopd(dentry)->state = MODIFIED;
++		dtohd(dentry) = hidden_dentry;
++		dtohd2(dentry) = hidden_sto_dentry;
++
++		err = mini_fo_tri_interpose(hidden_dentry,
++					    hidden_sto_dentry,
++					    dentry, dir->i_sb, 1);
++		if (err) {
++			printk(KERN_CRIT "mini_fo_lookup: error interposing (state1).\n");
++			goto out_free;
++		}
++		goto out;
++	}
++	/* state 2, file is unmodified */
++	if(hidden_dentry && hidden_dentry->d_inode && !del_flag) {
++
++		fist_copy_attr_atime(dir, hidden_dir_dentry->d_inode);
++
++		dtopd(dentry)->state = UNMODIFIED;
++		dtohd(dentry) = hidden_dentry;
++		dtohd2(dentry) = hidden_sto_dentry; /* could be negative */
++
++		err = mini_fo_tri_interpose(hidden_dentry,
++					    hidden_sto_dentry,
++					    dentry, dir->i_sb, 1);
++		if (err) {
++			printk(KERN_CRIT "mini_fo_lookup: error interposing (state2).\n");
++			goto out_free;
++		}
++		goto out;
++	}
++	/* state 3, file has been newly created */
++	if(hidden_sto_dentry && hidden_sto_dentry->d_inode && !del_flag) {
++
++		fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode);
++		dtopd(dentry)->state = CREATED;
++		dtohd(dentry) = hidden_dentry; /* could be negative */
++		dtohd2(dentry) = hidden_sto_dentry;
++
++		err = mini_fo_tri_interpose(hidden_dentry,
++					    hidden_sto_dentry,
++					    dentry, dir->i_sb, 1);
++		if (err) {
++			printk(KERN_CRIT "mini_fo_lookup: error interposing (state3).\n");
++			goto out_free;
++		}
++		goto out;
++	}
++
++	/* state 4, file has deleted and created again. */
++	if(hidden_dentry && hidden_sto_dentry &&
++	   hidden_dentry->d_inode &&
++	   hidden_sto_dentry->d_inode && del_flag) {
++
++		fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode);
++		dtopd(dentry)->state = DEL_REWRITTEN;
++		dtohd(dentry) = NULL;
++		dtohd2(dentry) = hidden_sto_dentry;
++
++		err = mini_fo_tri_interpose(NULL,
++					    hidden_sto_dentry,
++					    dentry, dir->i_sb, 1);
++		if (err) {
++			printk(KERN_CRIT "mini_fo_lookup: error interposing (state4).\n");
++			goto out_free;
++		}
++		/* We will never need this dentry again, as the file has been
++		 * deleted from base */
++		dput(hidden_dentry);
++		goto out;
++	}
++	/* state 5, file has been deleted in base */
++	if(hidden_dentry && hidden_sto_dentry &&
++	   hidden_dentry->d_inode &&
++	   !hidden_sto_dentry->d_inode && del_flag) {
++
++		/* check which parents atime we need for updating */
++		if(hidden_sto_dir_dentry->d_inode)
++			fist_copy_attr_atime(dir,
++					     hidden_sto_dir_dentry->d_inode);
++		else
++			fist_copy_attr_atime(dir,
++					     hidden_dir_dentry->d_inode);
++
++		dtopd(dentry)->state = DELETED;
++		dtohd(dentry) = NULL;
++		dtohd2(dentry) = hidden_sto_dentry;
++
++		/* add negative dentry to dcache to speed up lookups */
++		d_add(dentry, NULL);
++		dput(hidden_dentry);
++		goto out;
++	}
++	/* state 6, file does not exist */
++	if(((hidden_dentry && !hidden_dentry->d_inode) ||
++	    (hidden_sto_dentry && !hidden_sto_dentry->d_inode)) && !del_flag)
++		{
++			/* check which parents atime we need for updating */
++			if(hidden_sto_dir_dentry && hidden_sto_dir_dentry->d_inode)
++				fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode);
++			else
++				fist_copy_attr_atime(dir, hidden_dir_dentry->d_inode);
++
++			dtopd(dentry)->state = NON_EXISTANT;
++			dtohd(dentry) = hidden_dentry;
++			dtohd2(dentry) = hidden_sto_dentry;
++			d_add(dentry, NULL);
++			goto out;
++		}
++
++	/* if we get to here, were in an invalid state. bad. */
++	printk(KERN_CRIT "mini_fo_lookup: ERROR, meta data corruption detected.\n");
++
++	/* end state checking */
++ out_free:
++	d_drop(dentry);		/* so that our bad dentry will get destroyed */
++	kfree(dtopd(dentry));
++	__dtopd(dentry) = NULL;	/* be safe */
++
++ out_dput:
++	if(hidden_dentry)
++		dput(hidden_dentry);
++	if(hidden_sto_dentry)
++		dput(hidden_sto_dentry); /* drops usage count and marks for release */
++
++ out:
++	/* initalize wol if file exists and is directory */
++	if(dentry->d_inode) {
++		if(S_ISDIR(dentry->d_inode->i_mode)) {
++			itopd(dentry->d_inode)->deleted_list_size = -1;
++			itopd(dentry->d_inode)->renamed_list_size = -1;
++			meta_build_lists(dentry);
++		}
++	}
++	return ERR_PTR(err);
++}
++
++
++STATIC int
++mini_fo_link(dentry_t *old_dentry, inode_t *dir, dentry_t *new_dentry)
++{
++	int err;
++	dentry_t *hidden_old_dentry;
++	dentry_t *hidden_new_dentry;
++	dentry_t *hidden_dir_dentry;
++
++
++	check_mini_fo_dentry(old_dentry);
++	check_mini_fo_dentry(new_dentry);
++	check_mini_fo_inode(dir);
++
++	/* no links to directorys and existing targets target allowed */
++	if(S_ISDIR(old_dentry->d_inode->i_mode) ||
++	   is_mini_fo_existant(new_dentry)) {
++		err = -EPERM;
++		goto out;
++	}
++
++	/* bring it directly from unmod to del_rew */
++	if(dtost(old_dentry) == UNMODIFIED) {
++		err = nondir_unmod_to_mod(old_dentry, 1);
++		if(err) {
++			err = -EINVAL;
++			goto out;
++		}
++		err = meta_add_d_entry(old_dentry->d_parent,
++				       old_dentry->d_name.name,
++				       old_dentry->d_name.len);
++		if(err) {
++			err = -EINVAL;
++			goto out;
++		}
++		dput(dtohd(old_dentry));
++		dtohd(old_dentry) = NULL;
++		dtost(old_dentry) = DEL_REWRITTEN;
++	}
++
++	err = get_neg_sto_dentry(new_dentry);
++	if(err) {
++		err = -EINVAL;
++		goto out;
++	}
++
++	hidden_old_dentry = dtohd2(old_dentry);
++	hidden_new_dentry = dtohd2(new_dentry);
++
++	dget(hidden_old_dentry);
++	dget(hidden_new_dentry);
++
++	/* was: hidden_dir_dentry = lock_parent(hidden_new_dentry); */
++	hidden_dir_dentry = dget(hidden_new_dentry->d_parent);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = vfs_link(hidden_old_dentry,
++		       hidden_dir_dentry->d_inode,
++		       hidden_new_dentry);
++	if (err || !hidden_new_dentry->d_inode)
++		goto out_lock;
++
++	dtost(new_dentry) = CREATED;
++ 	err = mini_fo_tri_interpose(NULL, hidden_new_dentry, new_dentry, dir->i_sb, 0);
++	if (err)
++		goto out_lock;
++
++	fist_copy_attr_timesizes(dir, hidden_new_dentry->d_inode);
++	/* propagate number of hard-links */
++	old_dentry->d_inode->i_nlink = itohi2(old_dentry->d_inode)->i_nlink;
++
++ out_lock:
++	/* was: unlock_dir(hidden_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_dir_dentry);
++
++	dput(hidden_new_dentry);
++	dput(hidden_old_dentry);
++	if (!new_dentry->d_inode)
++		d_drop(new_dentry);
++
++ out:
++	return err;
++}
++
++
++STATIC int
++mini_fo_unlink(inode_t *dir, dentry_t *dentry)
++{
++	int err = 0;
++
++	dget(dentry);
++	if(dtopd(dentry)->state == MODIFIED) {
++		err = nondir_mod_to_del(dentry);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == UNMODIFIED) {
++		err = nondir_unmod_to_del(dentry);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == CREATED) {
++		err = nondir_creat_to_del(dentry);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == DEL_REWRITTEN) {
++		err = nondir_del_rew_to_del(dentry);
++		goto out;
++	}
++
++	printk(KERN_CRIT "mini_fo_unlink: ERROR, invalid state detected.\n");
++
++ out:
++	fist_copy_attr_times(dir, itohi2(dentry->d_parent->d_inode));
++
++	if(!err) {
++		/* is this causing my pain? d_delete(dentry); */
++		d_drop(dentry);
++	}
++
++	dput(dentry);
++	return err;
++}
++
++
++STATIC int
++mini_fo_symlink(inode_t *dir, dentry_t *dentry, const char *symname)
++{
++	int err=0;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++        umode_t mode;
++#endif
++
++	/* Fail if the symlink file exists */
++	if(!(dtost(dentry) == DELETED ||
++	     dtost(dentry) == NON_EXISTANT)) {
++		err = -EEXIST;
++		goto out;
++	}
++
++	err = get_neg_sto_dentry(dentry);
++	if(err) {
++		err = -EINVAL;
++		goto out;
++	}
++	hidden_sto_dentry = dtohd2(dentry);
++
++	dget(hidden_sto_dentry);
++	/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	mode = S_IALLUGO;
++	err = vfs_symlink(hidden_sto_dir_dentry->d_inode,
++			  hidden_sto_dentry, symname, mode);
++#else
++	err = vfs_symlink(hidden_sto_dir_dentry->d_inode,
++			  hidden_sto_dentry,
++			  symname);
++#endif
++	if (err || !hidden_sto_dentry->d_inode)
++                goto out_lock;
++
++        if(dtost(dentry) == DELETED) {
++                dtost(dentry) = DEL_REWRITTEN;
++                err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0);
++                if(err)
++                        goto out_lock;
++        } else if(dtost(dentry) == NON_EXISTANT) {
++                dtost(dentry) = CREATED;
++                err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0);
++                if(err)
++                        goto out_lock;
++        }
++	fist_copy_attr_timesizes(dir, hidden_sto_dir_dentry->d_inode);
++
++ out_lock:
++        /* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++
++        dput(hidden_sto_dentry);
++        if (!dentry->d_inode)
++                d_drop(dentry);
++ out:
++        return err;
++}
++
++STATIC int
++mini_fo_mkdir(inode_t *dir, dentry_t *dentry, int mode)
++{
++	int err;
++
++	err = create_sto_dir(dentry, mode);
++
++	check_mini_fo_dentry(dentry);
++
++	return err;
++}
++
++
++STATIC int
++mini_fo_rmdir(inode_t *dir, dentry_t *dentry)
++{
++	int err = 0;
++
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++	dentry_t *meta_dentry;
++	inode_t *hidden_sto_dir = NULL;
++
++	check_mini_fo_dentry(dentry);
++	check_mini_fo_inode(dir);
++
++	dget(dentry);
++	if(dtopd(dentry)->state == MODIFIED) {
++		/* XXX: disabled, because it does not bother to check files on
++		 * the original filesystem - just a hack, but better than simply
++		 * removing it without testing */
++		err = -EINVAL;
++		goto out;
++
++		hidden_sto_dir = itohi2(dir);
++		hidden_sto_dentry = dtohd2(dentry);
++
++		/* was:hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++		hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++		/* Delete an old WOL file contained in the storage dir */
++		meta_dentry = lookup_one_len(META_FILENAME,
++					     hidden_sto_dentry,
++					     strlen(META_FILENAME));
++		if(meta_dentry->d_inode) {
++			err = vfs_unlink(hidden_sto_dentry->d_inode, meta_dentry);
++			dput(meta_dentry);
++			if(!err)
++				d_delete(meta_dentry);
++		}
++
++		err = vfs_rmdir(hidden_sto_dir, hidden_sto_dentry);
++		dput(hidden_sto_dentry);
++		if(!err)
++			d_delete(hidden_sto_dentry);
++
++		/* propagate number of hard-links */
++		dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++
++		dput(dtohd(dentry));
++
++		dtohd(dentry) = NULL;
++		dtopd(dentry)->state = DELETED;
++
++		/* carefull with R files */
++		if( __meta_is_r_entry(dir,
++				      dentry->d_name.name,
++				      dentry->d_name.len) == 1) {
++			err = meta_remove_r_entry(dentry->d_parent,
++						  dentry->d_name.name,
++						  dentry->d_name.len);
++			if(err) {
++				printk(KERN_CRIT "mini_fo: rmdir: meta_remove_r_entry failed.\n");
++				goto out;
++			}
++		}
++		else {
++			/* ok, add deleted file to META */
++			meta_add_d_entry(dentry->d_parent,
++					 dentry->d_name.name,
++					 dentry->d_name.len);
++		}
++		/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++		dput(hidden_sto_dir_dentry);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == UNMODIFIED) {
++		/* XXX: simply adding it to the delete list here is fscking dangerous!
++		 * as a temporary hack, i will disable rmdir on unmodified directories
++		 * for now.
++		 */
++		err = -EINVAL;
++		goto out;
++
++		err = get_neg_sto_dentry(dentry);
++		if(err) {
++			err = -EINVAL;
++			goto out;
++		}
++
++		/* dput base dentry, this will relase the inode and free the
++		 * dentry, as we will never need it again. */
++		dput(dtohd(dentry));
++		dtohd(dentry) = NULL;
++		dtopd(dentry)->state = DELETED;
++
++		/* add deleted file to META-file */
++		meta_add_d_entry(dentry->d_parent,
++				 dentry->d_name.name,
++				 dentry->d_name.len);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == CREATED) {
++		hidden_sto_dir = itohi2(dir);
++		hidden_sto_dentry = dtohd2(dentry);
++
++		/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry);*/
++		hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++		/* Delete an old WOL file contained in the storage dir */
++		meta_dentry = lookup_one_len(META_FILENAME,
++					     hidden_sto_dentry,
++					     strlen(META_FILENAME));
++		if(meta_dentry->d_inode) {
++			/* is this necessary? dget(meta_dentry); */
++			err = vfs_unlink(hidden_sto_dentry->d_inode,
++					 meta_dentry);
++			dput(meta_dentry);
++			if(!err)
++				d_delete(meta_dentry);
++		}
++
++		err = vfs_rmdir(hidden_sto_dir, hidden_sto_dentry);
++		dput(hidden_sto_dentry);
++		if(!err)
++			d_delete(hidden_sto_dentry);
++
++		/* propagate number of hard-links */
++		dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++		dtopd(dentry)->state = NON_EXISTANT;
++
++		/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++		dput(hidden_sto_dir_dentry);
++
++		goto out;
++	}
++	else if(dtopd(dentry)->state == DEL_REWRITTEN) {
++		hidden_sto_dir = itohi2(dir);
++		hidden_sto_dentry = dtohd2(dentry);
++
++		/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry);*/
++		hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++		/* Delete an old WOL file contained in the storage dir */
++		meta_dentry = lookup_one_len(META_FILENAME,
++					     hidden_sto_dentry,
++					     strlen(META_FILENAME));
++		if(meta_dentry->d_inode) {
++			/* is this necessary? dget(meta_dentry); */
++			err = vfs_unlink(hidden_sto_dentry->d_inode,
++					 meta_dentry);
++			dput(meta_dentry);
++			if(!err)
++				d_delete(meta_dentry);
++		}
++
++		err = vfs_rmdir(hidden_sto_dir, hidden_sto_dentry);
++		dput(hidden_sto_dentry);
++		if(!err)
++			d_delete(hidden_sto_dentry);
++
++		/* propagate number of hard-links */
++		dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++		dtopd(dentry)->state = DELETED;
++		/* was: unlock_dir(hidden_sto_dir_dentry); */
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++		dput(hidden_sto_dir_dentry);
++		goto out;
++	}
++
++	printk(KERN_CRIT "mini_fo_rmdir: ERROR, invalid state detected.\n");
++
++ out:
++	if(!err) {
++		d_drop(dentry);
++	}
++
++	fist_copy_attr_times(dir, itohi2(dentry->d_parent->d_inode));
++	dput(dentry);
++
++	return err;
++}
++
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_mknod(inode_t *dir, dentry_t *dentry, int mode, dev_t dev)
++#else
++mini_fo_mknod(inode_t *dir, dentry_t *dentry, int mode, int dev)
++#endif
++{
++	int err = 0;
++
++	check_mini_fo_dentry(dentry);
++
++	err = create_sto_nod(dentry, mode, dev);
++	if(err) {
++		printk(KERN_CRIT "mini_fo_mknod: creating sto nod failed.\n");
++		err = -EINVAL;
++	}
++
++	check_mini_fo_dentry(dentry);
++	return err;
++}
++
++
++STATIC int
++mini_fo_rename(inode_t *old_dir, dentry_t *old_dentry,
++	       inode_t *new_dir, dentry_t *new_dentry)
++{
++	/* dispatch */
++	if(S_ISDIR(old_dentry->d_inode->i_mode))
++		return rename_directory(old_dir, old_dentry, new_dir, new_dentry);
++	return rename_nondir(old_dir, old_dentry, new_dir, new_dentry);
++
++}
++
++int rename_directory(inode_t *old_dir, dentry_t *old_dentry,
++		     inode_t *new_dir, dentry_t *new_dentry)
++{
++	int err, bpath_len;
++	char *bpath;
++
++	dentry_t *hidden_old_dentry;
++	dentry_t *hidden_new_dentry;
++	dentry_t *hidden_old_dir_dentry;
++	dentry_t *hidden_new_dir_dentry;
++
++	err = 0;
++	bpath = NULL;
++	bpath_len = 0;
++
++	/* this is a test, chuck out if it works */
++	if(!(dtopd(new_dentry)->state == DELETED ||
++	     dtopd(new_dentry)->state == NON_EXISTANT)) {
++		printk(KERN_CRIT "mini_fo: rename_directory: \
++                                  uh, ah, new_dentry not negative.\n");
++		/* return -1; */
++	}
++
++	/* state = UNMODIFIED */
++	if(dtopd(old_dentry)->state == UNMODIFIED) {
++		err = dir_unmod_to_mod(old_dentry);
++		if (err)
++			goto out;
++	}
++
++	/* state = MODIFIED */
++	if(dtopd(old_dentry)->state == MODIFIED) {
++		bpath = meta_check_r_entry(old_dentry->d_parent,
++					   old_dentry->d_name.name,
++					   old_dentry->d_name.len);
++		if(bpath) {
++			err = meta_remove_r_entry(old_dentry->d_parent,
++						  old_dentry->d_name.name,
++						  old_dentry->d_name.len);
++			if(err) {
++				printk(KERN_CRIT "mini_fo: rename_directory:\
++                                                   meta_remove_r_entry \
++                                                  failed.\n");
++				goto out;
++			}
++			err = meta_add_r_entry(new_dentry->d_parent,
++					       bpath,
++					       strlen(bpath),
++					       new_dentry->d_name.name,
++					       new_dentry->d_name.len);
++			kfree(bpath);
++		}
++		else {/* wol it */
++			err = meta_add_d_entry(old_dentry->d_parent,
++					       old_dentry->d_name.name,
++					       old_dentry->d_name.len);
++			if (err)
++				goto out;
++			/* put it on rename list */
++			err = get_mini_fo_bpath(old_dentry,
++						&bpath,
++						&bpath_len);
++			if (err)
++				goto out;
++			err = meta_add_r_entry(new_dentry->d_parent,
++					       bpath, bpath_len,
++					       new_dentry->d_name.name,
++					       new_dentry->d_name.len);
++			if (err)
++				goto out;
++		}
++		/* no state change, MODIFIED stays MODIFIED */
++	}
++	/* state = CREATED */
++	if(dtopd(old_dentry)->state == CREATED ||
++	   dtopd(old_dentry)->state == DEL_REWRITTEN) {
++		if(dtohd(old_dentry))
++			dput(dtohd(old_dentry));
++
++		if(dtopd(new_dentry)->state == DELETED) {
++			dtopd(old_dentry)->state = DEL_REWRITTEN;
++			dtohd(old_dentry) = NULL;
++		}
++		else if(dtopd(new_dentry)->state == NON_EXISTANT) {
++			dtopd(old_dentry)->state = CREATED;
++			/* steal new dentry's neg. base dentry */
++			dtohd(old_dentry) = dtohd(new_dentry);
++			dtohd(new_dentry) = NULL;
++		}
++	}
++	if(dtopd(new_dentry)->state == UNMODIFIED ||
++	   dtopd(new_dentry)->state == NON_EXISTANT) {
++		err = get_neg_sto_dentry(new_dentry);
++		if(err)
++			goto out;
++	}
++
++	/* now move sto file */
++	hidden_old_dentry = dtohd2(old_dentry);
++	hidden_new_dentry = dtohd2(new_dentry);
++
++	dget(hidden_old_dentry);
++	dget(hidden_new_dentry);
++
++	hidden_old_dir_dentry = dget(hidden_old_dentry->d_parent);
++	hidden_new_dir_dentry = dget(hidden_new_dentry->d_parent);
++	double_lock(hidden_old_dir_dentry, hidden_new_dir_dentry);
++
++	err = vfs_rename(hidden_old_dir_dentry->d_inode, hidden_old_dentry,
++			 hidden_new_dir_dentry->d_inode, hidden_new_dentry);
++	if(err)
++		goto out_lock;
++
++	fist_copy_attr_all(new_dir, hidden_new_dir_dentry->d_inode);
++	if (new_dir != old_dir)
++		fist_copy_attr_all(old_dir,
++				   hidden_old_dir_dentry->d_inode);
++
++ out_lock:
++	/* double_unlock will dput the new/old parent dentries
++	 * whose refcnts were incremented via get_parent above. */
++	double_unlock(hidden_old_dir_dentry, hidden_new_dir_dentry);
++	dput(hidden_new_dentry);
++	dput(hidden_old_dentry);
++
++ out:
++	return err;
++}
++
++int rename_nondir(inode_t *old_dir, dentry_t *old_dentry,
++		  inode_t *new_dir, dentry_t *new_dentry)
++{
++	int err=0;
++
++	check_mini_fo_dentry(old_dentry);
++	check_mini_fo_dentry(new_dentry);
++	check_mini_fo_inode(old_dir);
++	check_mini_fo_inode(new_dir);
++
++	/* state: UNMODIFIED */
++	if(dtost(old_dentry) == UNMODIFIED) {
++		err = nondir_unmod_to_mod(old_dentry, 1);
++		if(err) {
++			err = -EINVAL;
++			goto out;
++		}
++	}
++
++	/* the easy states */
++	if(exists_in_storage(old_dentry)) {
++
++		dentry_t *hidden_old_dentry;
++		dentry_t *hidden_new_dentry;
++		dentry_t *hidden_old_dir_dentry;
++		dentry_t *hidden_new_dir_dentry;
++
++		/* if old file is MODIFIED, add it to the deleted_list */
++		if(dtopd(old_dentry)->state == MODIFIED) {
++			meta_add_d_entry(old_dentry->d_parent,
++					 old_dentry->d_name.name,
++					 old_dentry->d_name.len);
++
++			dput(dtohd(old_dentry));
++		}
++		/* if old file is CREATED, we only release the base dentry */
++		if(dtopd(old_dentry)->state == CREATED) {
++			if(dtohd(old_dentry))
++				dput(dtohd(old_dentry));
++		}
++
++		/* now setup the new states (depends on new_dentry state) */
++		/* new dentry state =  MODIFIED */
++		if(dtopd(new_dentry)->state == MODIFIED) {
++			meta_add_d_entry(new_dentry->d_parent,
++					 new_dentry->d_name.name,
++					 new_dentry->d_name.len);
++
++			/* new dentry will be d_put'ed later by the vfs
++			 * so don't do it here
++			 * dput(dtohd(new_dentry));
++			 */
++			dtohd(old_dentry) = NULL;
++			dtopd(old_dentry)->state = DEL_REWRITTEN;
++		}
++		/* new dentry state =  UNMODIFIED */
++		else if(dtopd(new_dentry)->state == UNMODIFIED) {
++			if(get_neg_sto_dentry(new_dentry))
++				return -EINVAL;
++
++			meta_add_d_entry(new_dentry->d_parent,
++					 new_dentry->d_name.name,
++					 new_dentry->d_name.len);
++
++			/* is this right??? */
++			/*dput(dtohd(new_dentry));*/
++			dtohd(old_dentry) = NULL;
++			dtopd(old_dentry)->state = DEL_REWRITTEN;
++		}
++		/* new dentry state =  CREATED */
++		else if(dtopd(new_dentry)->state == CREATED) {
++			/* we keep the neg. base dentry (if exists) */
++			dtohd(old_dentry) = dtohd(new_dentry);
++			/* ...and set it to Null, or we'll get
++			 * dcache.c:345 if it gets dput twice... */
++			dtohd(new_dentry) = NULL;
++			dtopd(old_dentry)->state = CREATED;
++		}
++		/* new dentry state =  NON_EXISTANT */
++		else if(dtopd(new_dentry)->state == NON_EXISTANT) {
++			if(get_neg_sto_dentry(new_dentry))
++				return -EINVAL;
++
++			/* we keep the neg. base dentry (if exists) */
++			dtohd(old_dentry) = dtohd(new_dentry);
++			/* ...and set it to Null, or we'll get
++			 * Dr. dcache.c:345 if it gets dput twice... */
++			dtohd(new_dentry) = NULL;
++			dtopd(old_dentry)->state = CREATED;
++		}
++		/* new dentry state =  DEL_REWRITTEN or DELETED */
++		else if(dtopd(new_dentry)->state == DEL_REWRITTEN ||
++			dtopd(new_dentry)->state == DELETED) {
++			dtohd(old_dentry) = NULL;
++			dtopd(old_dentry)->state = DEL_REWRITTEN;
++		}
++		else { /* not possible, uhh, ahh */
++			printk(KERN_CRIT
++			       "mini_fo: rename_reg_file: invalid state detected [1].\n");
++			return -1;
++		}
++
++		/* now we definitely have a sto file */
++		hidden_old_dentry = dtohd2(old_dentry);
++		hidden_new_dentry = dtohd2(new_dentry);
++
++		dget(hidden_old_dentry);
++		dget(hidden_new_dentry);
++
++		hidden_old_dir_dentry = dget(hidden_old_dentry->d_parent);
++		hidden_new_dir_dentry = dget(hidden_new_dentry->d_parent);
++		double_lock(hidden_old_dir_dentry, hidden_new_dir_dentry);
++
++		err = vfs_rename(hidden_old_dir_dentry->d_inode,
++				 hidden_old_dentry,
++				 hidden_new_dir_dentry->d_inode,
++				 hidden_new_dentry);
++		if(err)
++			goto out_lock;
++
++		fist_copy_attr_all(new_dir, hidden_new_dir_dentry->d_inode);
++		if (new_dir != old_dir)
++			fist_copy_attr_all(old_dir, hidden_old_dir_dentry->d_inode);
++
++	out_lock:
++		/* double_unlock will dput the new/old parent dentries
++		 * whose refcnts were incremented via get_parent above.
++		 */
++		double_unlock(hidden_old_dir_dentry, hidden_new_dir_dentry);
++		dput(hidden_new_dentry);
++		dput(hidden_old_dentry);
++	out:
++		return err;
++	}
++	else { /* invalid state */
++		printk(KERN_CRIT "mini_fo: rename_reg_file: ERROR: invalid state detected [2].\n");
++		return -1;
++	}
++}
++
++
++STATIC int
++mini_fo_readlink(dentry_t *dentry, char *buf, int bufsiz)
++{
++	int err=0;
++	dentry_t *hidden_dentry = NULL;
++
++	if(dtohd2(dentry) && dtohd2(dentry)->d_inode) {
++		hidden_dentry = dtohd2(dentry);
++	} else if(dtohd(dentry) && dtohd(dentry)->d_inode) {
++		hidden_dentry = dtohd(dentry);
++	} else {
++		goto out;
++	}
++
++	if (!hidden_dentry->d_inode->i_op ||
++	    !hidden_dentry->d_inode->i_op->readlink) {
++		err = -EINVAL;		goto out;
++	}
++
++	err = hidden_dentry->d_inode->i_op->readlink(hidden_dentry,
++						     buf,
++						     bufsiz);
++	if (err > 0)
++		fist_copy_attr_atime(dentry->d_inode, hidden_dentry->d_inode);
++
++ out:
++	return err;
++}
++
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
++static int mini_fo_follow_link(dentry_t *dentry, struct nameidata *nd)
++#else
++static void* mini_fo_follow_link(dentry_t *dentry, struct nameidata *nd)
++#endif
++{
++	char *buf;
++	int len = PAGE_SIZE, err;
++	mm_segment_t old_fs;
++
++	/* in 2.6 this is freed by mini_fo_put_link called by __do_follow_link */
++	buf = kmalloc(len, GFP_KERNEL);
++	if (!buf) {
++		err = -ENOMEM;
++		goto out;
++	}
++
++	/* read the symlink, and then we will follow it */
++	old_fs = get_fs();
++	set_fs(KERNEL_DS);
++	err = dentry->d_inode->i_op->readlink(dentry, buf, len);
++	set_fs(old_fs);
++	if (err < 0) {
++		kfree(buf);
++		buf = NULL;
++		goto out;
++	}
++	buf[err] = 0;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++        nd_set_link(nd, buf);
++        err = 0;
++#else
++	err = vfs_follow_link(nd, buf);
++#endif
++
++ out:
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	kfree(buf);
++#endif
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
++        return err;
++#else
++        return ERR_PTR(err);
++#endif
++}
++
++STATIC
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
++void mini_fo_put_link(struct dentry *dentry, struct nameidata *nd)
++#else
++void mini_fo_put_link(struct dentry *dentry, struct nameidata *nd, void *cookie)
++#endif
++{
++        char *link;
++        link = nd_get_link(nd);
++        kfree(link);
++}
++#endif
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_permission(inode_t *inode, int mask, struct nameidata *nd)
++#else
++mini_fo_permission(inode_t *inode, int mask)
++#endif
++{
++	inode_t *hidden_inode;
++	int mode;
++	int err;
++
++	if(itohi2(inode)) {
++		hidden_inode = itohi2(inode);
++	} else {
++		hidden_inode = itohi(inode);
++	}
++	mode = inode->i_mode;
++
++	/* not really needed, as permission handles everything:
++	 *	err = vfs_permission(inode, mask);
++	 *	if (err)
++	 *		goto out;
++	 */
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	err = permission(hidden_inode, mask, nd);
++#else
++	err = permission(hidden_inode, mask);
++#endif
++
++	/*  out: */
++	return err;
++}
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++STATIC int
++mini_fo_inode_revalidate(dentry_t *dentry)
++{
++	int err = 0;
++	dentry_t *hidden_dentry;
++	inode_t *hidden_inode;
++
++	ASSERT(dentry->d_inode);
++	ASSERT(itopd(dentry->d_inode));
++
++	if(itohi2(dentry->d_inode)) {
++                hidden_dentry = dtohd2(dentry);
++		hidden_inode = hidden_dentry->d_inode;
++	} else if(itohi(dentry->d_inode)) {
++                hidden_dentry = dtohd(dentry);
++		hidden_inode = hidden_dentry->d_inode;
++	} else {
++                printk(KERN_CRIT "mini_fo_inode_revalidate: ERROR, invalid state detected.\n");
++                err = -ENOENT;
++                goto out;
++        }
++	if (hidden_inode && hidden_inode->i_op && hidden_inode->i_op->revalidate){
++		err = hidden_inode->i_op->revalidate(hidden_dentry);
++		if (err)
++			goto out;
++	}
++	fist_copy_attr_all(dentry->d_inode, hidden_inode);
++ out:
++	return err;
++}
++#endif
++
++STATIC int
++mini_fo_setattr(dentry_t *dentry, struct iattr *ia)
++{
++	int err = 0;
++
++	check_mini_fo_dentry(dentry);
++
++	if(!is_mini_fo_existant(dentry)) {
++		printk(KERN_CRIT "mini_fo_setattr: ERROR, invalid state detected [1].\n");
++		goto out;
++	}
++
++	if(dtost(dentry) == UNMODIFIED) {
++		if(!IS_COPY_FLAG(ia->ia_valid))
++			goto out; /* we ignore these changes to base */
++
++		if(S_ISDIR(dentry->d_inode->i_mode)) {
++			err = dir_unmod_to_mod(dentry);
++		} else {
++			/* we copy contents if file is not beeing truncated */
++			if(S_ISREG(dentry->d_inode->i_mode) &&
++			   !(ia->ia_size == 0 && (ia->ia_valid & ATTR_SIZE))) {
++				err = nondir_unmod_to_mod(dentry, 1);
++			} else
++				err = nondir_unmod_to_mod(dentry, 0);
++		}
++		if(err) {
++			err = -EINVAL;
++			printk(KERN_CRIT "mini_fo_setattr: ERROR changing states.\n");
++			goto out;
++		}
++	}
++	if(!exists_in_storage(dentry)) {
++		printk(KERN_CRIT "mini_fo_setattr: ERROR, invalid state detected [2].\n");
++		err = -EINVAL;
++		goto out;
++	}
++	ASSERT(dentry->d_inode);
++	ASSERT(dtohd2(dentry));
++	ASSERT(itopd(dentry->d_inode));
++	ASSERT(itohi2(dentry->d_inode));
++
++	err = notify_change(dtohd2(dentry), ia);
++	fist_copy_attr_all(dentry->d_inode, itohi2(dentry->d_inode));
++ out:
++	return err;
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++STATIC int
++mini_fo_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat)
++{
++	int err = 0;
++        dentry_t *hidden_dentry;
++
++	ASSERT(dentry->d_inode);
++	ASSERT(itopd(dentry->d_inode));
++
++	if(itohi2(dentry->d_inode)) {
++                hidden_dentry = dtohd2(dentry);
++	} else if(itohi(dentry->d_inode)) {
++                hidden_dentry = dtohd(dentry);
++	} else {
++                printk(KERN_CRIT "mini_fo_getattr: ERROR, invalid state detected.\n");
++                err = -ENOENT;
++                goto out;
++        }
++	fist_copy_attr_all(dentry->d_inode, hidden_dentry->d_inode);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	generic_fillattr(dentry->d_inode, stat);
++	if (!stat->blksize) {
++		struct super_block *s = hidden_dentry->d_inode->i_sb;
++		unsigned blocks;
++		blocks = (stat->size+s->s_blocksize-1) >> s->s_blocksize_bits;
++		stat->blocks = (s->s_blocksize / 512) * blocks;
++		stat->blksize = s->s_blocksize;
++	}
++ out:
++        return err;
++}
++#endif
++
++#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20))
++#if 0 /* no xattr_alloc() and xattr_free() */
++/* This is lifted from fs/xattr.c */
++static void *
++xattr_alloc(size_t size, size_t limit)
++{
++	void *ptr;
++
++	if (size > limit)
++		return ERR_PTR(-E2BIG);
++
++	if (!size)	/* size request, no buffer is needed */
++		return NULL;
++	else if (size <= PAGE_SIZE)
++		ptr = kmalloc((unsigned long) size, GFP_KERNEL);
++	else
++		ptr = vmalloc((unsigned long) size);
++	if (!ptr)
++		return ERR_PTR(-ENOMEM);
++	return ptr;
++}
++
++static void
++xattr_free(void *ptr, size_t size)
++{
++	if (!size)	/* size request, no buffer was needed */
++		return;
++	else if (size <= PAGE_SIZE)
++		kfree(ptr);
++	else
++		vfree(ptr);
++}
++#endif /* no xattr_alloc() and xattr_free() */
++
++/* BKL held by caller.
++ * dentry->d_inode->i_sem down
++ */
++STATIC int
++mini_fo_getxattr(struct dentry *dentry, const char *name, void *value, size_t size) {
++	struct dentry *hidden_dentry = NULL;
++	int err = -EOPNOTSUPP;
++	/* Define these anyway so we don't need as much ifdef'ed code. */
++	char *encoded_name = NULL;
++	char *encoded_value = NULL;
++
++	check_mini_fo_dentry(dentry);
++
++	if(exists_in_storage(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else
++		hidden_dentry = dtohd(dentry);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	if (hidden_dentry->d_inode->i_op->getxattr) {
++		encoded_name = (char *)name;
++		encoded_value = (char *)value;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_dentry->d_inode->i_sem);
++#endif
++		/* lock_kernel() already done by caller. */
++		err = hidden_dentry->d_inode->i_op->getxattr(hidden_dentry, encoded_name, encoded_value, size);
++		/* unlock_kernel() will be done by caller. */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_dentry->d_inode->i_sem);
++#endif
++	}
++	return err;
++}
++
++/* BKL held by caller.
++ * dentry->d_inode->i_sem down
++ */
++STATIC int
++#if ((LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,21) \
++     && LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,23)) \
++     || LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
++mini_fo_setxattr(struct dentry *dentry, const char *name,
++		 const void *value, size_t size, int flags)
++#else
++mini_fo_setxattr(struct dentry *dentry, const char *name,
++		 void *value, size_t size, int flags)
++#endif
++
++{
++	struct dentry *hidden_dentry = NULL;
++	int err = -EOPNOTSUPP;
++
++	/* Define these anyway, so we don't have as much ifdef'ed code. */
++	char *encoded_value = NULL;
++	char *encoded_name = NULL;
++
++	check_mini_fo_dentry(dentry);
++
++	if(exists_in_storage(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else
++		hidden_dentry = dtohd(dentry);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	if (hidden_dentry->d_inode->i_op->setxattr) {
++		encoded_name = (char *)name;
++		encoded_value = (char *)value;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_dentry->d_inode->i_sem);
++#endif
++		/* lock_kernel() already done by caller. */
++		err = hidden_dentry->d_inode->i_op->setxattr(hidden_dentry, encoded_name, encoded_value, size, flags);
++		/* unlock_kernel() will be done by caller. */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_dentry->d_inode->i_sem);
++#endif
++	}
++	return err;
++}
++
++/* BKL held by caller.
++ * dentry->d_inode->i_sem down
++ */
++STATIC int
++mini_fo_removexattr(struct dentry *dentry, const char *name) {
++	struct dentry *hidden_dentry = NULL;
++	int err = -EOPNOTSUPP;
++	char *encoded_name;
++
++	check_mini_fo_dentry(dentry);
++
++	if(exists_in_storage(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else
++		hidden_dentry = dtohd(dentry);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	if (hidden_dentry->d_inode->i_op->removexattr) {
++		encoded_name = (char *)name;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_dentry->d_inode->i_sem);
++#endif
++		/* lock_kernel() already done by caller. */
++		err = hidden_dentry->d_inode->i_op->removexattr(hidden_dentry, encoded_name);
++		/* unlock_kernel() will be done by caller. */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_dentry->d_inode->i_sem);
++#endif
++	}
++	return err;
++}
++
++/* BKL held by caller.
++ * dentry->d_inode->i_sem down
++ */
++STATIC int
++mini_fo_listxattr(struct dentry *dentry, char *list, size_t size) {
++	struct dentry *hidden_dentry = NULL;
++	int err = -EOPNOTSUPP;
++	char *encoded_list = NULL;
++
++	check_mini_fo_dentry(dentry);
++
++	if(exists_in_storage(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else
++		hidden_dentry = dtohd(dentry);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	if (hidden_dentry->d_inode->i_op->listxattr) {
++		encoded_list = list;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_dentry->d_inode->i_sem);
++#endif
++		/* lock_kernel() already done by caller. */
++		err = hidden_dentry->d_inode->i_op->listxattr(hidden_dentry, encoded_list, size);
++		/* unlock_kernel() will be done by caller. */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_dentry->d_inode->i_sem);
++#endif
++	}
++	return err;
++}
++# endif /* defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20)) */
++
++struct inode_operations mini_fo_symlink_iops =
++	{
++		readlink:	mini_fo_readlink,
++		follow_link: mini_fo_follow_link,
++		/* mk: permission:	mini_fo_permission, */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++		revalidate:	mini_fo_inode_revalidate,
++#endif
++		setattr:	mini_fo_setattr,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		getattr:	mini_fo_getattr,
++		put_link:       mini_fo_put_link,
++#endif
++
++#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20))
++		setxattr:	mini_fo_setxattr,
++		getxattr:	mini_fo_getxattr,
++		listxattr:	mini_fo_listxattr,
++		removexattr: mini_fo_removexattr
++# endif /* defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20)) */
++	};
++
++struct inode_operations mini_fo_dir_iops =
++	{
++		create:	mini_fo_create,
++		lookup:	mini_fo_lookup,
++		link:	mini_fo_link,
++		unlink:	mini_fo_unlink,
++		symlink:	mini_fo_symlink,
++		mkdir:	mini_fo_mkdir,
++		rmdir:	mini_fo_rmdir,
++		mknod:	mini_fo_mknod,
++		rename:	mini_fo_rename,
++		/* no readlink/follow_link for non-symlinks */
++		// off because we have setattr
++		//    truncate:	mini_fo_truncate,
++		/* mk:permission:	mini_fo_permission, */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++		revalidate:	mini_fo_inode_revalidate,
++#endif
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		getattr:	mini_fo_getattr,
++#endif
++		setattr:	mini_fo_setattr,
++#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20))
++		setxattr:	mini_fo_setxattr,
++		getxattr:	mini_fo_getxattr,
++		listxattr:	mini_fo_listxattr,
++		removexattr: mini_fo_removexattr
++# endif /* XATTR && LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20) */
++	};
++
++struct inode_operations mini_fo_main_iops =
++	{
++		/* permission:	mini_fo_permission, */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++		revalidate:	mini_fo_inode_revalidate,
++#endif
++		setattr:	mini_fo_setattr,
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		getattr:	mini_fo_getattr,
++#endif
++#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20))
++		setxattr:	mini_fo_setxattr,
++		getxattr:	mini_fo_getxattr,
++		listxattr:	mini_fo_listxattr,
++		removexattr:    mini_fo_removexattr
++# endif /* XATTR && LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20) */
++	};
+--- /dev/null
++++ b/fs/mini_fo/main.c
+@@ -0,0 +1,423 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++#include <linux/module.h>
++
++/* This definition must only appear after we include <linux/module.h> */
++#ifndef MODULE_LICENSE
++# define MODULE_LICENSE(bison)
++#endif /* not MODULE_LICENSE */
++
++/*
++ * This is the mini_fo tri interpose function, which extends the
++ * functionality of the regular interpose by interposing a higher
++ * level inode on top of two lower level ones: the base filesystem
++ * inode and the storage filesystem inode.
++ *
++ *  sb we pass is mini_fo's super_block
++ */
++int
++mini_fo_tri_interpose(dentry_t *hidden_dentry,
++		      dentry_t *hidden_sto_dentry,
++		      dentry_t *dentry, super_block_t *sb, int flag)
++{
++	inode_t *hidden_inode = NULL;
++	inode_t *hidden_sto_inode = NULL; /* store corresponding storage inode */
++	int err = 0;
++	inode_t *inode;
++
++	/* Pointer to hidden_sto_inode if exists, else to hidden_inode.
++	 * This is used to copy the attributes of the correct inode. */
++	inode_t *master_inode;
++
++	if(hidden_dentry)
++		hidden_inode = hidden_dentry->d_inode;
++	if(hidden_sto_dentry)
++		hidden_sto_inode = hidden_sto_dentry->d_inode;
++
++	ASSERT(dentry->d_inode == NULL);
++
++	/* mk: One of the inodes associated with the dentrys is likely to
++	 * be NULL, so carefull:
++	 */
++	ASSERT((hidden_inode != NULL) || (hidden_sto_inode != NULL));
++
++	if(hidden_sto_inode)
++		master_inode = hidden_sto_inode;
++	else
++		master_inode = hidden_inode;
++
++	/*
++	 * We allocate our new inode below, by calling iget.
++	 * iget will call our read_inode which will initialize some
++	 * of the new inode's fields
++	 */
++
++	/*
++	 * original: inode = iget(sb, hidden_inode->i_ino);
++	 */
++	inode = iget(sb, iunique(sb, 25));
++	if (!inode) {
++		err = -EACCES;		/* should be impossible??? */
++		goto out;
++	}
++
++	/*
++	 * interpose the inode if not already interposed
++	 *   this is possible if the inode is being reused
++	 * XXX: what happens if we get_empty_inode() but there's another already?
++	 * for now, ASSERT() that this can't happen; fix later.
++	 */
++	if (itohi(inode) != NULL) {
++		printk(KERN_CRIT "mini_fo_tri_interpose: itohi(inode) != NULL.\n");
++	}
++	if (itohi2(inode) != NULL) {
++		printk(KERN_CRIT "mini_fo_tri_interpose: itohi2(inode) != NULL.\n");
++	}
++
++	/* mk: Carefull, igrab can't handle NULL inodes (ok, why should it?), so
++	 * we need to check here:
++	 */
++	if(hidden_inode)
++		itohi(inode) = igrab(hidden_inode);
++	else
++		itohi(inode) = NULL;
++
++	if(hidden_sto_inode)
++		itohi2(inode) = igrab(hidden_sto_inode);
++	else
++		itohi2(inode) = NULL;
++
++
++	/* Use different set of inode ops for symlinks & directories*/
++	if (S_ISLNK(master_inode->i_mode))
++		inode->i_op = &mini_fo_symlink_iops;
++	else if (S_ISDIR(master_inode->i_mode))
++		inode->i_op = &mini_fo_dir_iops;
++
++	/* Use different set of file ops for directories */
++	if (S_ISDIR(master_inode->i_mode))
++		inode->i_fop = &mini_fo_dir_fops;
++
++	/* properly initialize special inodes */
++	if (S_ISBLK(master_inode->i_mode) || S_ISCHR(master_inode->i_mode) ||
++	    S_ISFIFO(master_inode->i_mode) || S_ISSOCK(master_inode->i_mode)) {
++		init_special_inode(inode, master_inode->i_mode, master_inode->i_rdev);
++	}
++
++	/* Fix our inode's address operations to that of the lower inode */
++	if (inode->i_mapping->a_ops != master_inode->i_mapping->a_ops) {
++		inode->i_mapping->a_ops = master_inode->i_mapping->a_ops;
++	}
++
++	/* only (our) lookup wants to do a d_add */
++	if (flag)
++		d_add(dentry, inode);
++	else
++		d_instantiate(dentry, inode);
++
++	ASSERT(dtopd(dentry) != NULL);
++
++	/* all well, copy inode attributes */
++	fist_copy_attr_all(inode, master_inode);
++
++ out:
++	return err;
++}
++
++/* parse mount options "base=" and "sto=" */
++dentry_t *
++mini_fo_parse_options(super_block_t *sb, char *options)
++{
++	dentry_t *hidden_root = ERR_PTR(-EINVAL);
++	dentry_t *hidden_root2 = ERR_PTR(-EINVAL);
++	struct nameidata nd, nd2;
++	char *name, *tmp, *end;
++	int err = 0;
++
++	/* We don't want to go off the end of our arguments later on. */
++	for (end = options; *end; end++);
++
++	while (options < end) {
++		tmp = options;
++		while (*tmp && *tmp != ',')
++			tmp++;
++		*tmp = '\0';
++		if (!strncmp("base=", options, 5)) {
++			name = options + 5;
++			printk(KERN_INFO "mini_fo: using base directory: %s\n", name);
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++			if (path_init(name, LOOKUP_FOLLOW, &nd))
++				err = path_walk(name, &nd);
++#else
++			err = path_lookup(name, LOOKUP_FOLLOW, &nd);
++#endif
++			if (err) {
++				printk(KERN_CRIT "mini_fo: error accessing hidden directory '%s'\n", name);
++				hidden_root = ERR_PTR(err);
++				goto out;
++			}
++			hidden_root = nd.dentry;
++			stopd(sb)->base_dir_dentry = nd.dentry;
++			stopd(sb)->hidden_mnt = nd.mnt;
++
++		} else if(!strncmp("sto=", options, 4)) {
++			/* parse the storage dir */
++			name = options + 4;
++			printk(KERN_INFO "mini_fo: using storage directory: %s\n", name);
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++			if(path_init(name, LOOKUP_FOLLOW, &nd2))
++				err = path_walk(name, &nd2);
++#else
++                        err = path_lookup(name, LOOKUP_FOLLOW, &nd2);
++#endif
++			if(err) {
++				printk(KERN_CRIT "mini_fo: error accessing hidden storage directory '%s'\n", name);
++
++				hidden_root2 = ERR_PTR(err);
++				goto out;
++			}
++			hidden_root2 = nd2.dentry;
++			stopd(sb)->storage_dir_dentry = nd2.dentry;
++			stopd(sb)->hidden_mnt2 = nd2.mnt;
++			stohs2(sb) = hidden_root2->d_sb;
++
++			/* validate storage dir, this is done in
++			 * mini_fo_read_super for the base directory.
++			 */
++			if (IS_ERR(hidden_root2)) {
++				printk(KERN_WARNING "mini_fo_parse_options: storage dentry lookup failed (err = %ld)\n", PTR_ERR(hidden_root2));
++				goto out;
++			}
++			if (!hidden_root2->d_inode) {
++				printk(KERN_WARNING "mini_fo_parse_options: no storage dir to interpose on.\n");
++				goto out;
++			}
++			stohs2(sb) = hidden_root2->d_sb;
++		} else {
++			printk(KERN_WARNING "mini_fo: unrecognized option '%s'\n", options);
++			hidden_root = ERR_PTR(-EINVAL);
++			goto out;
++		}
++		options = tmp + 1;
++	}
++
++ out:
++	if(IS_ERR(hidden_root2))
++		return hidden_root2;
++	return hidden_root;
++}
++
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++static int
++#else
++super_block_t *
++#endif
++mini_fo_read_super(super_block_t *sb, void *raw_data, int silent)
++{
++	dentry_t *hidden_root;
++	int err = 0;
++
++	if (!raw_data) {
++		printk(KERN_WARNING "mini_fo_read_super: missing argument\n");
++		err = -EINVAL;
++		goto out;
++	}
++	/*
++	 * Allocate superblock private data
++	 */
++	__stopd(sb) = kmalloc(sizeof(struct mini_fo_sb_info), GFP_KERNEL);
++	if (!stopd(sb)) {
++		printk(KERN_WARNING "%s: out of memory\n", __FUNCTION__);
++		err = -ENOMEM;
++		goto out;
++	}
++	stohs(sb) = NULL;
++
++	hidden_root = mini_fo_parse_options(sb, raw_data);
++	if (IS_ERR(hidden_root)) {
++		printk(KERN_WARNING "mini_fo_read_super: lookup_dentry failed (err = %ld)\n", PTR_ERR(hidden_root));
++		err = PTR_ERR(hidden_root);
++		goto out_free;
++	}
++	if (!hidden_root->d_inode) {
++		printk(KERN_WARNING "mini_fo_read_super: no directory to interpose on\n");
++		goto out_free;
++	}
++	stohs(sb) = hidden_root->d_sb;
++
++	/*
++	 * Linux 2.4.2-ac3 and beyond has code in
++	 * mm/filemap.c:generic_file_write() that requires sb->s_maxbytes
++	 * to be populated.  If not set, all write()s under that sb will
++	 * return 0.
++	 *
++	 * Linux 2.4.4+ automatically sets s_maxbytes to MAX_NON_LFS;
++	 * the filesystem should override it only if it supports LFS.
++	 */
++	/* non-SCA code is good to go with LFS */
++	sb->s_maxbytes = hidden_root->d_sb->s_maxbytes;
++
++	sb->s_op = &mini_fo_sops;
++	/*
++	 * we can't use d_alloc_root if we want to use
++	 * our own interpose function unchanged,
++	 * so we simply replicate *most* of the code in d_alloc_root here
++	 */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	sb->s_root = d_alloc(NULL, &(const struct qstr) { "/", 1, 0 });
++#else
++	sb->s_root = d_alloc(NULL, &(const struct qstr){hash: 0, name: "/", len : 1});
++#endif
++	if (IS_ERR(sb->s_root)) {
++		printk(KERN_WARNING "mini_fo_read_super: d_alloc failed\n");
++		err = -ENOMEM;
++		goto out_dput;
++	}
++
++	sb->s_root->d_op = &mini_fo_dops;
++	sb->s_root->d_sb = sb;
++	sb->s_root->d_parent = sb->s_root;
++
++	/* link the upper and lower dentries */
++	__dtopd(sb->s_root) = (struct mini_fo_dentry_info *)
++		kmalloc(sizeof(struct mini_fo_dentry_info), GFP_KERNEL);
++	if (!dtopd(sb->s_root)) {
++		err = -ENOMEM;
++		goto out_dput2;
++	}
++	dtopd(sb->s_root)->state = MODIFIED;
++	dtohd(sb->s_root) = hidden_root;
++
++	/* fanout relevant, interpose on storage root dentry too */
++	dtohd2(sb->s_root) = stopd(sb)->storage_dir_dentry;
++
++	/* ...and call tri-interpose to interpose root dir inodes
++	 * if (mini_fo_interpose(hidden_root, sb->s_root, sb, 0))
++	 */
++	if(mini_fo_tri_interpose(hidden_root, dtohd2(sb->s_root), sb->s_root, sb, 0))
++		goto out_dput2;
++
++	/* initalize the wol list */
++	itopd(sb->s_root->d_inode)->deleted_list_size = -1;
++	itopd(sb->s_root->d_inode)->renamed_list_size = -1;
++	meta_build_lists(sb->s_root);
++
++	goto out;
++
++ out_dput2:
++	dput(sb->s_root);
++ out_dput:
++	dput(hidden_root);
++	dput(dtohd2(sb->s_root)); /* release the hidden_sto_dentry too */
++ out_free:
++	kfree(stopd(sb));
++	__stopd(sb) = NULL;
++ out:
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++        return err;
++#else
++        if (err) {
++		return ERR_PTR(err);
++        } else {
++		return sb;
++        }
++#endif
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++static int mini_fo_get_sb(struct file_system_type *fs_type,
++					  int flags, const char *dev_name,
++					  void *raw_data, struct vfsmount *mnt)
++{
++	return get_sb_nodev(fs_type, flags, raw_data, mini_fo_read_super, mnt);
++}
++#else
++static struct super_block *mini_fo_get_sb(struct file_system_type *fs_type,
++					  int flags, const char *dev_name,
++					  void *raw_data)
++{
++	return get_sb_nodev(fs_type, flags, raw_data, mini_fo_read_super);
++}
++#endif
++
++void mini_fo_kill_block_super(struct super_block *sb)
++{
++	generic_shutdown_super(sb);
++	/*
++	 *      XXX: BUG: Halcrow: Things get unstable sometime after this point:
++	 *      lib/rwsem-spinlock.c:127: spin_is_locked on uninitialized
++	 *      fs/fs-writeback.c:402: spin_lock(fs/super.c:a0381828) already
++	 *      locked by fs/fs-writeback.c/402
++	 *
++	 *      Apparently, someone's not releasing a lock on sb_lock...
++	 */
++}
++
++static struct file_system_type mini_fo_fs_type = {
++	.owner          = THIS_MODULE,
++	.name           = "mini_fo",
++	.get_sb         = mini_fo_get_sb,
++	.kill_sb        = mini_fo_kill_block_super,
++	.fs_flags       = 0,
++};
++
++
++#else
++static DECLARE_FSTYPE(mini_fo_fs_type, "mini_fo", mini_fo_read_super, 0);
++#endif
++
++static int __init init_mini_fo_fs(void)
++{
++	printk("Registering mini_fo version $Id$\n");
++	return register_filesystem(&mini_fo_fs_type);
++}
++static void __exit exit_mini_fo_fs(void)
++{
++	printk("Unregistering mini_fo version $Id$\n");
++	unregister_filesystem(&mini_fo_fs_type);
++}
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++EXPORT_NO_SYMBOLS;
++#endif
++
++MODULE_AUTHOR("Erez Zadok <ezk@cs.sunysb.edu>");
++MODULE_DESCRIPTION("FiST-generated mini_fo filesystem");
++MODULE_LICENSE("GPL");
++
++/* MODULE_PARM(fist_debug_var, "i"); */
++/* MODULE_PARM_DESC(fist_debug_var, "Debug level"); */
++
++module_init(init_mini_fo_fs)
++module_exit(exit_mini_fo_fs)
+--- /dev/null
++++ b/fs/mini_fo/Makefile
+@@ -0,0 +1,17 @@
++#
++# Makefile for mini_fo 2.4 and 2.6 Linux kernels
++#
++# Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License
++# as published by the Free Software Foundation; either version
++# 2 of the License, or (at your option) any later version.
++#
++
++obj-$(CONFIG_MINI_FO) := mini_fo.o
++mini_fo-objs   := meta.o dentry.o file.o inode.o main.o super.o state.o aux.o
++
++# dependencies
++${mini_fo-objs}: mini_fo.h fist.h
++
+--- /dev/null
++++ b/fs/mini_fo/meta.c
+@@ -0,0 +1,1000 @@
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif /* HAVE_CONFIG_H */
++#include "fist.h"
++#include "mini_fo.h"
++
++int meta_build_lists(dentry_t *dentry)
++{
++	struct mini_fo_inode_info *inode_info;
++
++	dentry_t *meta_dentry = 0;
++	file_t *meta_file = 0;
++	mm_segment_t old_fs;
++	void *buf;
++
++	int bytes, len;
++	struct vfsmount *meta_mnt;
++	char *entry;
++
++	inode_info = itopd(dentry->d_inode);
++	if(!(inode_info->deleted_list_size == -1 &&
++	     inode_info->renamed_list_size == -1)) {
++		printk(KERN_CRIT "mini_fo: meta_build_lists: \
++                                  Error, list(s) not virgin.\n");
++		return -1;
++	}
++
++	/* init our meta lists */
++	INIT_LIST_HEAD(&inode_info->deleted_list);
++	inode_info->deleted_list_size = 0;
++
++	INIT_LIST_HEAD(&inode_info->renamed_list);
++	inode_info->renamed_list_size = 0;
++
++  	/* might there be a META-file? */
++	if(dtohd2(dentry) && dtohd2(dentry)->d_inode) {
++		meta_dentry = lookup_one_len(META_FILENAME,
++					     dtohd2(dentry),
++					     strlen(META_FILENAME));
++		if(!meta_dentry->d_inode) {
++			dput(meta_dentry);
++			goto out_ok;
++		}
++		/* $%& err, is this correct? */
++		meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++		mntget(meta_mnt);
++
++
++		/* open META-file for reading */
++		meta_file = dentry_open(meta_dentry, meta_mnt, 0x0);
++		if(!meta_file || IS_ERR(meta_file)) {
++			printk(KERN_CRIT "mini_fo: meta_build_lists: \
++                                          ERROR opening META file.\n");
++			goto out_err;
++		}
++
++		/* check if fs supports reading */
++		if(!meta_file->f_op->read) {
++			printk(KERN_CRIT "mini_fo: meta_build_lists: \
++                                          ERROR, fs does not support reading.\n");
++			goto out_err_close;
++		}
++
++		/* allocate a page for transfering the data */
++		buf = (void *) __get_free_page(GFP_KERNEL);
++		if(!buf) {
++			printk(KERN_CRIT "mini_fo: meta_build_lists: \
++                                          ERROR, out of mem.\n");
++			goto out_err_close;
++		}
++		meta_file->f_pos = 0;
++		old_fs = get_fs();
++		set_fs(KERNEL_DS);
++		do {
++			char *c;
++			bytes = meta_file->f_op->read(meta_file, buf, PAGE_SIZE, &meta_file->f_pos);
++			if(bytes == PAGE_SIZE) {
++				/* trim a cut off filename and adjust f_pos to get it next time */
++				for(c = (char*) buf+PAGE_SIZE;
++				    *c != '\n';
++				    c--, bytes--, meta_file->f_pos--);
++			}
++			entry = (char *) buf;
++			while(entry < (char *) buf+bytes) {
++
++				char *old_path;
++				char *dir_name;
++				int old_len, new_len;
++
++				/* len without '\n'*/
++				len = (int) (strchr(entry, '\n') - entry);
++				switch (*entry) {
++				case 'D':
++					/* format: "D filename" */
++					meta_list_add_d_entry(dentry,
++							      entry+2,
++							      len-2);
++					break;
++				case 'R':
++					/* format: "R path/xy/dir newDir" */
++					old_path = entry+2;
++					dir_name = strchr(old_path, ' ') + 1;
++					old_len =  dir_name - old_path - 1;
++					new_len = ((int) entry) + len - ((int ) dir_name);
++					meta_list_add_r_entry(dentry,
++							      old_path,
++							      old_len,
++							      dir_name,
++							      new_len);
++					break;
++				default:
++					/* unknown entry type detected */
++					break;
++				}
++				entry += len+1;
++			}
++
++		} while(meta_file->f_pos < meta_dentry->d_inode->i_size);
++
++		free_page((unsigned long) buf);
++		set_fs(old_fs);
++		fput(meta_file);
++	}
++	goto out_ok;
++
++ out_err_close:
++	fput(meta_file);
++ out_err:
++	mntput(meta_mnt);
++	dput(meta_dentry);
++	return -1;
++ out_ok:
++	return 1; /* check this!!! inode_info->wol_size; */
++}
++
++/* cleanups up all lists and free's the mem by dentry */
++int meta_put_lists(dentry_t *dentry)
++{
++	if(!dentry || !dentry->d_inode) {
++		printk("mini_fo: meta_put_lists: invalid dentry passed.\n");
++		return -1;
++	}
++	return __meta_put_lists(dentry->d_inode);
++}
++
++/* cleanups up all lists and free's the mem by inode */
++int __meta_put_lists(inode_t *inode)
++{
++	int err = 0;
++	if(!inode || !itopd(inode)) {
++		printk("mini_fo: __meta_put_lists: invalid inode passed.\n");
++		return -1;
++	}
++	err = __meta_put_d_list(inode);
++	err |= __meta_put_r_list(inode);
++	return err;
++}
++
++int meta_sync_lists(dentry_t *dentry)
++{
++	int err = 0;
++	if(!dentry || !dentry->d_inode) {
++		printk("mini_fo: meta_sync_lists: \
++                        invalid dentry passed.\n");
++		return -1;
++	}
++	err = meta_sync_d_list(dentry, 0);
++	err |= meta_sync_r_list(dentry, 1);
++	return err;
++}
++
++
++/* remove all D entries from the renamed list and free the mem */
++int __meta_put_d_list(inode_t *inode)
++{
++	struct list_head *tmp;
++        struct deleted_entry *del_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode)) {
++		printk(KERN_CRIT "mini_fo: __meta_put_d_list: \
++                                  invalid inode passed.\n");
++		return -1;
++	}
++	inode_info = itopd(inode);
++
++        /* nuke the DELETED-list */
++        if(inode_info->deleted_list_size <= 0)
++		return 0;
++
++	while(!list_empty(&inode_info->deleted_list)) {
++		tmp = inode_info->deleted_list.next;
++		list_del(tmp);
++		del_entry = list_entry(tmp, struct deleted_entry, list);
++		kfree(del_entry->name);
++		kfree(del_entry);
++	}
++	inode_info->deleted_list_size = 0;
++
++	return 0;
++}
++
++/* remove all R entries from the renamed list and free the mem */
++int __meta_put_r_list(inode_t *inode)
++{
++	struct list_head *tmp;
++	struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode)) {
++		printk(KERN_CRIT "mini_fo: meta_put_r_list: invalid inode.\n");
++		return -1;
++	}
++	inode_info = itopd(inode);
++
++        /* nuke the RENAMED-list */
++        if(inode_info->renamed_list_size <= 0)
++		return 0;
++
++	while(!list_empty(&inode_info->renamed_list)) {
++		tmp = inode_info->renamed_list.next;
++		list_del(tmp);
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		kfree(ren_entry->new_name);
++		kfree(ren_entry->old_name);
++		kfree(ren_entry);
++	}
++	inode_info->renamed_list_size = 0;
++
++	return 0;
++}
++
++int meta_add_d_entry(dentry_t *dentry, const char *name, int len)
++{
++	int err = 0;
++	err = meta_list_add_d_entry(dentry, name, len);
++	err |= meta_write_d_entry(dentry,name,len);
++	return err;
++}
++
++/* add a D entry to the deleted list */
++int meta_list_add_d_entry(dentry_t *dentry, const char *name, int len)
++{
++        struct deleted_entry *del_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_list_add_d_entry: \
++                                  invalid dentry passed.\n");
++		return -1;
++	}
++	inode_info = itopd(dentry->d_inode);
++
++        if(inode_info->deleted_list_size < 0)
++                return -1;
++
++        del_entry = (struct deleted_entry *)
++		kmalloc(sizeof(struct deleted_entry), GFP_KERNEL);
++        del_entry->name = (char*) kmalloc(len, GFP_KERNEL);
++        if(!del_entry || !del_entry->name) {
++                printk(KERN_CRIT "mini_fo: meta_list_add_d_entry: \
++                                  out of mem.\n");
++		kfree(del_entry->name);
++		kfree(del_entry);
++                return -ENOMEM;
++        }
++
++        strncpy(del_entry->name, name, len);
++        del_entry->len = len;
++
++        list_add(&del_entry->list, &inode_info->deleted_list);
++        inode_info->deleted_list_size++;
++        return 0;
++}
++
++int meta_add_r_entry(dentry_t *dentry,
++			  const char *old_name, int old_len,
++			  const char *new_name, int new_len)
++{
++	int err = 0;
++	err = meta_list_add_r_entry(dentry,
++				    old_name, old_len,
++				    new_name, new_len);
++	err |= meta_write_r_entry(dentry,
++				  old_name, old_len,
++				  new_name, new_len);
++	return err;
++}
++
++/* add a R entry to the renamed list */
++int meta_list_add_r_entry(dentry_t *dentry,
++			  const char *old_name, int old_len,
++			  const char *new_name, int new_len)
++{
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_list_add_r_entry: \
++                                  invalid dentry passed.\n");
++		return -1;
++	}
++	inode_info = itopd(dentry->d_inode);
++
++        if(inode_info->renamed_list_size < 0)
++                return -1;
++
++        ren_entry = (struct renamed_entry *)
++		kmalloc(sizeof(struct renamed_entry), GFP_KERNEL);
++        ren_entry->old_name = (char*) kmalloc(old_len, GFP_KERNEL);
++        ren_entry->new_name = (char*) kmalloc(new_len, GFP_KERNEL);
++
++        if(!ren_entry || !ren_entry->old_name || !ren_entry->new_name) {
++                printk(KERN_CRIT "mini_fo: meta_list_add_r_entry: \
++                                  out of mem.\n");
++		kfree(ren_entry->new_name);
++		kfree(ren_entry->old_name);
++		kfree(ren_entry);
++                return -ENOMEM;
++        }
++
++        strncpy(ren_entry->old_name, old_name, old_len);
++        ren_entry->old_len = old_len;
++        strncpy(ren_entry->new_name, new_name, new_len);
++        ren_entry->new_len = new_len;
++
++        list_add(&ren_entry->list, &inode_info->renamed_list);
++        inode_info->renamed_list_size++;
++        return 0;
++}
++
++
++int meta_remove_r_entry(dentry_t *dentry, const char *name, int len)
++{
++	int err = 0;
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT
++		       "mini_fo: meta_remove_r_entry: \
++                        invalid dentry passed.\n");
++		return -1;
++	}
++
++	err = meta_list_remove_r_entry(dentry, name, len);
++	err |= meta_sync_lists(dentry);
++	return err;
++}
++
++int meta_list_remove_r_entry(dentry_t *dentry, const char *name, int len)
++{
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT
++		       "mini_fo: meta_list_remove_r_entry: \
++                        invalid dentry passed.\n");
++		return -1;
++	}
++	return __meta_list_remove_r_entry(dentry->d_inode, name, len);
++}
++
++int __meta_list_remove_r_entry(inode_t *inode, const char *name, int len)
++{
++	struct list_head *tmp;
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode))
++		printk(KERN_CRIT
++		       "mini_fo: __meta_list_remove_r_entry: \
++                        invalid inode passed.\n");
++	inode_info = itopd(inode);
++
++        if(inode_info->renamed_list_size < 0)
++                return -1;
++        if(inode_info->renamed_list_size == 0)
++                return 1;
++
++	list_for_each(tmp, &inode_info->renamed_list) {
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		if(ren_entry->new_len != len)
++			continue;
++
++		if(!strncmp(ren_entry->new_name, name, len)) {
++			list_del(tmp);
++			kfree(ren_entry->new_name);
++			kfree(ren_entry->old_name);
++			kfree(ren_entry);
++			inode_info->renamed_list_size--;
++			return 0;
++		}
++	}
++	return 1;
++}
++
++
++/* append a single D entry to the meta file */
++int meta_write_d_entry(dentry_t *dentry, const char *name, int len)
++{
++	dentry_t *meta_dentry = 0;
++        file_t *meta_file = 0;
++        mm_segment_t old_fs;
++
++        int bytes, err;
++        struct vfsmount *meta_mnt = 0;
++        char *buf;
++
++	err = 0;
++
++	if(itopd(dentry->d_inode)->deleted_list_size < 0) {
++		err = -1;
++		goto out;
++	}
++
++	if(dtopd(dentry)->state == UNMODIFIED) {
++                err = build_sto_structure(dentry->d_parent, dentry);
++                if(err) {
++                        printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                          build_sto_structure failed.\n");
++			goto out;
++                }
++        }
++	meta_dentry = lookup_one_len(META_FILENAME,
++				     dtohd2(dentry), strlen (META_FILENAME));
++
++	/* We need to create a META-file */
++        if(!meta_dentry->d_inode) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry,
++			   S_IRUSR | S_IWUSR,
++			   NULL);
++#else
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry,
++			   S_IRUSR | S_IWUSR);
++#endif
++	}
++        /* open META-file for writing */
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        if(!meta_file || IS_ERR(meta_file)) {
++                printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                  ERROR opening meta file.\n");
++                mntput(meta_mnt); /* $%& is this necessary? */
++                dput(meta_dentry);
++		err = -1;
++                goto out;
++        }
++
++        /* check if fs supports writing */
++        if(!meta_file->f_op->write) {
++                printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                  ERROR, fs does not support writing.\n");
++                goto out_err_close;
++        }
++
++	meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */
++        old_fs = get_fs();
++        set_fs(KERNEL_DS);
++
++	/* size: len for name, 1 for \n and 2 for "D " */
++	buf = (char *) kmalloc(len+3, GFP_KERNEL);
++	if (!buf) {
++		printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                  out of mem.\n");
++		return -ENOMEM;
++	}
++
++	buf[0] = 'D';
++	buf[1] = ' ';
++	strncpy(buf+2, name, len);
++	buf[len+2] = '\n';
++	bytes = meta_file->f_op->write(meta_file, buf, len+3,
++				       &meta_file->f_pos);
++	if(bytes != len+3) {
++		printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                  ERROR writing.\n");
++		err = -1;
++	}
++	kfree(buf);
++	set_fs(old_fs);
++
++ out_err_close:
++	fput(meta_file);
++ out:
++	return err;
++}
++
++/* append a single R entry to the meta file */
++int meta_write_r_entry(dentry_t *dentry,
++		       const char *old_name, int old_len,
++		       const char *new_name, int new_len)
++{
++	dentry_t *meta_dentry = 0;
++        file_t *meta_file = 0;
++        mm_segment_t old_fs;
++
++        int bytes, err, buf_len;
++	struct vfsmount *meta_mnt = 0;
++        char *buf;
++
++
++	err = 0;
++
++	if(itopd(dentry->d_inode)->renamed_list_size < 0) {
++		err = -1;
++		goto out;
++	}
++
++	/* build the storage structure? */
++	if(dtopd(dentry)->state == UNMODIFIED) {
++                err = build_sto_structure(dentry->d_parent, dentry);
++                if(err) {
++                        printk(KERN_CRIT "mini_fo: meta_write_r_entry: \
++                                          build_sto_structure failed.\n");
++			goto out;
++                }
++        }
++	meta_dentry = lookup_one_len(META_FILENAME,
++				     dtohd2(dentry),
++				     strlen (META_FILENAME));
++        if(!meta_dentry->d_inode) {
++                /* We need to create a META-file */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR, NULL);
++#else
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR);
++#endif
++	}
++        /* open META-file for writing */
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        if(!meta_file || IS_ERR(meta_file)) {
++                printk(KERN_CRIT "mini_fo: meta_write_r_entry: \
++                                  ERROR opening meta file.\n");
++                mntput(meta_mnt);
++                dput(meta_dentry);
++		err = -1;
++                goto out;
++        }
++
++        /* check if fs supports writing */
++        if(!meta_file->f_op->write) {
++                printk(KERN_CRIT "mini_fo: meta_write_r_entry: \
++                                  ERROR, fs does not support writing.\n");
++                goto out_err_close;
++        }
++
++	meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */
++        old_fs = get_fs();
++        set_fs(KERNEL_DS);
++
++	/* size: 2 for "R ", old_len+new_len for names, 1 blank+1 \n */
++	buf_len = old_len + new_len + 4;
++	buf = (char *) kmalloc(buf_len, GFP_KERNEL);
++	if (!buf) {
++		printk(KERN_CRIT "mini_fo: meta_write_r_entry: out of mem.\n");
++		return -ENOMEM;
++	}
++
++	buf[0] = 'R';
++	buf[1] = ' ';
++	strncpy(buf + 2, old_name, old_len);
++	buf[old_len + 2] = ' ';
++	strncpy(buf + old_len + 3, new_name, new_len);
++	buf[buf_len -1] = '\n';
++	bytes = meta_file->f_op->write(meta_file, buf, buf_len, &meta_file->f_pos);
++	if(bytes != buf_len) {
++		printk(KERN_CRIT "mini_fo: meta_write_r_entry: ERROR writing.\n");
++		err = -1;
++	}
++
++	kfree(buf);
++	set_fs(old_fs);
++
++ out_err_close:
++	fput(meta_file);
++ out:
++	return err;
++}
++
++/* sync D list to disk, append data if app_flag is 1 */
++/* check the meta_mnt, which seems not to be used (properly)  */
++
++int meta_sync_d_list(dentry_t *dentry, int app_flag)
++{
++	dentry_t *meta_dentry;
++        file_t *meta_file;
++        mm_segment_t old_fs;
++
++        int bytes, err;
++        struct vfsmount *meta_mnt;
++        char *buf;
++
++	struct list_head *tmp;
++        struct deleted_entry *del_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	err = 0;
++	meta_file=0;
++	meta_mnt=0;
++
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                  invalid inode passed.\n");
++		err = -1;
++		goto out;
++	}
++	inode_info = itopd(dentry->d_inode);
++
++        if(inode_info->deleted_list_size < 0) {
++		err = -1;
++		goto out;
++	}
++
++	/* ok, there is something to sync */
++
++	/* build the storage structure? */
++        if(!dtohd2(dentry) && !itohi2(dentry->d_inode)) {
++                err = build_sto_structure(dentry->d_parent, dentry);
++                if(err) {
++                        printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                          build_sto_structure failed.\n");
++			goto out;
++                }
++        }
++	meta_dentry = lookup_one_len(META_FILENAME,
++				     dtohd2(dentry),
++				     strlen(META_FILENAME));
++        if(!meta_dentry->d_inode) {
++                /* We need to create a META-file */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR, NULL);
++#else
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR);
++#endif
++		app_flag = 0;
++	}
++	/* need we truncate the meta file? */
++	if(!app_flag) {
++		struct iattr newattrs;
++                newattrs.ia_size = 0;
++                newattrs.ia_valid = ATTR_SIZE | ATTR_CTIME;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&meta_dentry->d_inode->i_mutex);
++#else
++                down(&meta_dentry->d_inode->i_sem);
++#endif
++                err = notify_change(meta_dentry, &newattrs);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&meta_dentry->d_inode->i_mutex);
++#else
++                up(&meta_dentry->d_inode->i_sem);
++#endif
++
++                if(err || meta_dentry->d_inode->i_size != 0) {
++                        printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                          ERROR truncating meta file.\n");
++                        goto out_err_close;
++		}
++	}
++
++        /* open META-file for writing */
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        if(!meta_file || IS_ERR(meta_file)) {
++                printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                  ERROR opening meta file.\n");
++		/* we don't mntget so we dont't mntput (for now)
++		 * mntput(meta_mnt);
++		 */
++		dput(meta_dentry);
++		err = -1;
++                goto out;
++        }
++
++        /* check if fs supports writing */
++        if(!meta_file->f_op->write) {
++                printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                  ERROR, fs does not support writing.\n");
++                goto out_err_close;
++        }
++
++	meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */
++        old_fs = get_fs();
++        set_fs(KERNEL_DS);
++
++	/* here we go... */
++        list_for_each(tmp, &inode_info->deleted_list) {
++		del_entry = list_entry(tmp, struct deleted_entry, list);
++
++		/* size: len for name, 1 for \n and 2 for "D " */
++		buf = (char *) kmalloc(del_entry->len+3, GFP_KERNEL);
++		if (!buf) {
++			printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                          out of mem.\n");
++			return -ENOMEM;
++		}
++
++		buf[0] = 'D';
++		buf[1] = ' ';
++		strncpy(buf+2, del_entry->name, del_entry->len);
++		buf[del_entry->len+2] = '\n';
++		bytes = meta_file->f_op->write(meta_file, buf,
++					       del_entry->len+3,
++					       &meta_file->f_pos);
++		if(bytes != del_entry->len+3) {
++			printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                          ERROR writing.\n");
++			err |= -1;
++		}
++		kfree(buf);
++	}
++	set_fs(old_fs);
++
++ out_err_close:
++	fput(meta_file);
++ out:
++	return err;
++
++}
++
++int meta_sync_r_list(dentry_t *dentry, int app_flag)
++{
++	dentry_t *meta_dentry;
++        file_t *meta_file;
++        mm_segment_t old_fs;
++
++        int bytes, err, buf_len;
++        struct vfsmount *meta_mnt;
++        char *buf;
++
++	struct list_head *tmp;
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	err = 0;
++	meta_file=0;
++	meta_mnt=0;
++
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                  invalid dentry passed.\n");
++		err = -1;
++		goto out;
++	}
++	inode_info = itopd(dentry->d_inode);
++
++        if(inode_info->deleted_list_size < 0) {
++		err = -1;
++		goto out;
++	}
++
++	/* ok, there is something to sync */
++
++	/* build the storage structure? */
++        if(!dtohd2(dentry) && !itohi2(dentry->d_inode)) {
++                err = build_sto_structure(dentry->d_parent, dentry);
++                if(err) {
++                        printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                          build_sto_structure failed.\n");
++			goto out;
++                }
++        }
++	meta_dentry = lookup_one_len(META_FILENAME,
++				     dtohd2(dentry),
++				     strlen(META_FILENAME));
++        if(!meta_dentry->d_inode) {
++                /* We need to create a META-file */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR, NULL);
++#else
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR);
++#endif
++		app_flag = 0;
++	}
++	/* need we truncate the meta file? */
++	if(!app_flag) {
++		struct iattr newattrs;
++                newattrs.ia_size = 0;
++                newattrs.ia_valid = ATTR_SIZE | ATTR_CTIME;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&meta_dentry->d_inode->i_mutex);
++#else
++                down(&meta_dentry->d_inode->i_sem);
++#endif
++                err = notify_change(meta_dentry, &newattrs);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&meta_dentry->d_inode->i_mutex);
++#else
++                up(&meta_dentry->d_inode->i_sem);
++#endif
++                if(err || meta_dentry->d_inode->i_size != 0) {
++                        printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                          ERROR truncating meta file.\n");
++                        goto out_err_close;
++		}
++	}
++
++        /* open META-file for writing */
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        if(!meta_file || IS_ERR(meta_file)) {
++                printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                  ERROR opening meta file.\n");
++		/* we don't mntget so we dont't mntput (for now)
++		 * mntput(meta_mnt);
++		 */
++		dput(meta_dentry);
++		err = -1;
++                goto out;
++        }
++
++        /* check if fs supports writing */
++        if(!meta_file->f_op->write) {
++                printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                  ERROR, fs does not support writing.\n");
++                goto out_err_close;
++        }
++
++	meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */
++        old_fs = get_fs();
++        set_fs(KERNEL_DS);
++
++	/* here we go... */
++        list_for_each(tmp, &inode_info->renamed_list) {
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		/* size:
++		 * 2 for "R ", old_len+new_len for names, 1 blank+1 \n */
++		buf_len = ren_entry->old_len + ren_entry->new_len + 4;
++		buf = (char *) kmalloc(buf_len, GFP_KERNEL);
++		if (!buf) {
++			printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                          out of mem.\n");
++			return -ENOMEM;
++		}
++		buf[0] = 'R';
++		buf[1] = ' ';
++		strncpy(buf + 2, ren_entry->old_name, ren_entry->old_len);
++		buf[ren_entry->old_len + 2] = ' ';
++		strncpy(buf + ren_entry->old_len + 3,
++			ren_entry->new_name, ren_entry->new_len);
++		buf[buf_len - 1] = '\n';
++		bytes = meta_file->f_op->write(meta_file, buf,
++					       buf_len, &meta_file->f_pos);
++		if(bytes != buf_len) {
++			printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                          ERROR writing.\n");
++			err |= -1;
++		}
++		kfree(buf);
++	}
++	set_fs(old_fs);
++
++ out_err_close:
++	fput(meta_file);
++ out:
++	return err;
++}
++
++int meta_check_d_entry(dentry_t *dentry, const char *name, int len)
++{
++	if(!dentry || !dentry->d_inode)
++		printk(KERN_CRIT "mini_fo: meta_check_d_dentry: \
++                                  invalid dentry passed.\n");
++	return __meta_check_d_entry(dentry->d_inode, name, len);
++}
++
++int __meta_check_d_entry(inode_t *inode, const char *name, int len)
++{
++	struct list_head *tmp;
++        struct deleted_entry *del_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode))
++		printk(KERN_CRIT "mini_fo: __meta_check_d_dentry: \
++                                  invalid inode passed.\n");
++
++        inode_info = itopd(inode);
++
++        if(inode_info->deleted_list_size <= 0)
++                return 0;
++
++        list_for_each(tmp, &inode_info->deleted_list) {
++		del_entry = list_entry(tmp, struct deleted_entry, list);
++		if(del_entry->len != len)
++			continue;
++
++		if(!strncmp(del_entry->name, name, len))
++			return 1;
++	}
++	return 0;
++}
++
++/*
++ * check if file has been renamed and return path to orig. base dir.
++ * Implements no error return values so far, what of course sucks.
++ * String is null terminated.'
++ */
++char* meta_check_r_entry(dentry_t *dentry, const char *name, int len)
++{
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_check_r_dentry: \
++                                  invalid dentry passed.\n");
++		return NULL;
++	}
++	return __meta_check_r_entry(dentry->d_inode, name, len);
++}
++
++char* __meta_check_r_entry(inode_t *inode, const char *name, int len)
++{
++	struct list_head *tmp;
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++	char *old_path;
++
++	if(!inode || !itopd(inode)) {
++		printk(KERN_CRIT "mini_fo: meta_check_r_dentry: \
++                                  invalid inode passed.\n");
++		return NULL;
++	}
++	inode_info = itopd(inode);
++
++        if(inode_info->renamed_list_size <= 0)
++                return NULL;
++
++        list_for_each(tmp, &inode_info->renamed_list) {
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		if(ren_entry->new_len != len)
++			continue;
++
++		if(!strncmp(ren_entry->new_name, name, len)) {
++			old_path = (char *)
++				kmalloc(ren_entry->old_len+1, GFP_KERNEL);
++			strncpy(old_path,
++				ren_entry->old_name,
++				ren_entry->old_len);
++			old_path[ren_entry->old_len]='\0';
++			return old_path;
++		}
++	}
++	return NULL;
++}
++
++/*
++ * This version only checks if entry exists and return:
++ *     1 if exists,
++ *     0 if not,
++ *    -1 if error.
++ */
++int meta_is_r_entry(dentry_t *dentry, const char *name, int len)
++{
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_check_r_dentry [2]: \
++                                  invalid dentry passed.\n");
++		return -1;
++	}
++	return __meta_is_r_entry(dentry->d_inode, name, len);
++}
++
++int __meta_is_r_entry(inode_t *inode, const char *name, int len)
++{
++	struct list_head *tmp;
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode)) {
++		printk(KERN_CRIT "mini_fo: meta_check_r_dentry [2]: \
++                                  invalid inode passed.\n");
++		return -1;
++	}
++	inode_info = itopd(inode);
++
++        if(inode_info->renamed_list_size <= 0)
++                return -1;
++
++        list_for_each(tmp, &inode_info->renamed_list) {
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		if(ren_entry->new_len != len)
++			continue;
++
++		if(!strncmp(ren_entry->new_name, name, len))
++			return 1;
++	}
++	return 0;
++}
++
+--- /dev/null
++++ b/fs/mini_fo/mini_fo.h
+@@ -0,0 +1,510 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifndef __MINI_FO_H_
++#define __MINI_FO_H_
++
++#ifdef __KERNEL__
++
++/* META stuff */
++#define META_FILENAME "META_dAfFgHE39ktF3HD2sr"
++
++/* use xattrs? */
++#define XATTR
++
++/* File attributes that when changed, result in a file beeing copied to storage */
++#define COPY_FLAGS ATTR_MODE | ATTR_UID | ATTR_GID | ATTR_SIZE
++
++/*
++ * mini_fo filestates
++ */
++#define MODIFIED       1
++#define UNMODIFIED     2
++#define CREATED        3
++#define DEL_REWRITTEN  4
++#define DELETED        5
++#define NON_EXISTANT   6
++
++/* fist file systems superblock magic */
++# define MINI_FO_SUPER_MAGIC 0xf15f
++
++/*
++ * STRUCTURES:
++ */
++
++/* mini_fo inode data in memory */
++struct mini_fo_inode_info {
++	inode_t *wii_inode;
++	inode_t *wii_inode2; /* pointer to storage inode */
++
++	/* META-data lists */
++	/* deleted list, ex wol */
++	struct list_head deleted_list;
++	int deleted_list_size;
++
++	/* renamed list */
++	struct list_head renamed_list;
++	int renamed_list_size;
++
++	/* add other lists here ... */
++};
++
++/* mini_fo dentry data in memory */
++struct mini_fo_dentry_info {
++	dentry_t *wdi_dentry;
++	dentry_t *wdi_dentry2; /* pointer to  storage dentry */
++	unsigned int state;  /* state of the mini_fo dentry */
++};
++
++
++/* mini_fo super-block data in memory */
++struct mini_fo_sb_info {
++	super_block_t *wsi_sb, *wsi_sb2; /* mk: might point to the same sb */
++	struct vfsmount *hidden_mnt, *hidden_mnt2;
++	dentry_t *base_dir_dentry;
++	dentry_t *storage_dir_dentry;
++	;
++};
++
++/* readdir_data, readdir helper struct */
++struct readdir_data {
++	struct list_head ndl_list; /* linked list head ptr */
++	int ndl_size; /* list size */
++	int sto_done; /* flag to show that the storage dir entries have
++		       * all been read an now follow base entries */
++};
++
++/* file private data. */
++struct mini_fo_file_info {
++	struct file *wfi_file;
++	struct file *wfi_file2; /* pointer to storage file */
++	struct readdir_data rd;
++};
++
++/* struct ndl_entry */
++struct ndl_entry {
++	struct list_head list;
++	char *name;
++	int len;
++};
++
++/********************************
++ *  META-data structures
++ ********************************/
++
++/* deleted entry */
++struct deleted_entry {
++	struct list_head list;
++	char *name;
++	int len;
++};
++
++/* renamed entry */
++struct renamed_entry {
++	struct list_head list;
++	char *old_name;     /* old directory with full path */
++	int old_len;        /* length of above string */
++	char *new_name;     /* new directory name */
++	int new_len;        /* length of above string */
++};
++
++/* attr_change entry */
++struct attr_change_entry {
++	struct list_head list;
++	char *name;
++	int len;
++};
++
++/* link entry */
++struct link_entry {
++	struct list_head list;
++	int links_moved;
++	int inum_base;
++	int inum_sto;
++	char *weird_name;
++	int weird_name_len;
++};
++
++
++/* Some other stuff required for mini_fo_filldir64, copied from
++ * fs/readdir.c
++ */
++
++#define ROUND_UP64(x) (((x)+sizeof(u64)-1) & ~(sizeof(u64)-1))
++#define NAME_OFFSET(de) ((int) ((de)->d_name - (char *) (de)))
++
++
++struct linux_dirent64 {
++        u64             d_ino;
++        s64             d_off;
++        unsigned short  d_reclen;
++        unsigned char   d_type;
++        char            d_name[0];
++};
++
++
++struct getdents_callback64 {
++        struct linux_dirent64 * current_dir;
++        struct linux_dirent64 * previous;
++        int count;
++        int error;
++};
++
++struct linux_dirent {
++	unsigned long   d_ino;
++	unsigned long   d_off;
++	unsigned short  d_reclen;
++	char            d_name[1];
++};
++
++struct getdents_callback {
++	struct linux_dirent * current_dir;
++	struct linux_dirent * previous;
++	int count;
++	int error;
++};
++
++
++/*
++ * MACROS:
++ */
++
++/* file TO private_data */
++# define ftopd(file) ((struct mini_fo_file_info *)((file)->private_data))
++# define __ftopd(file) ((file)->private_data)
++/* file TO hidden_file */
++# define ftohf(file) ((ftopd(file))->wfi_file)
++# define ftohf2(file) ((ftopd(file))->wfi_file2)
++
++/* inode TO private_data */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++# define itopd(ino) ((struct mini_fo_inode_info *)(ino)->i_private)
++# define __itopd(ino) ((ino)->i_private)
++#else
++# define itopd(ino) ((struct mini_fo_inode_info *)(ino)->u.generic_ip)
++# define __itopd(ino) ((ino)->u.generic_ip)
++#endif
++/* inode TO hidden_inode */
++# define itohi(ino) (itopd(ino)->wii_inode)
++# define itohi2(ino) (itopd(ino)->wii_inode2)
++
++/* superblock TO private_data */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++# define stopd(super) ((struct mini_fo_sb_info *)(super)->s_fs_info)
++# define __stopd(super) ((super)->s_fs_info)
++#else
++# define stopd(super) ((struct mini_fo_sb_info *)(super)->u.generic_sbp)
++# define __stopd(super) ((super)->u.generic_sbp)
++#endif
++
++/* unused? # define vfs2priv stopd */
++/* superblock TO hidden_superblock */
++
++# define stohs(super) (stopd(super)->wsi_sb)
++# define stohs2(super) (stopd(super)->wsi_sb2)
++
++/* dentry TO private_data */
++# define dtopd(dentry) ((struct mini_fo_dentry_info *)(dentry)->d_fsdata)
++# define __dtopd(dentry) ((dentry)->d_fsdata)
++/* dentry TO hidden_dentry */
++# define dtohd(dent) (dtopd(dent)->wdi_dentry)
++# define dtohd2(dent) (dtopd(dent)->wdi_dentry2)
++
++/* dentry to state */
++# define dtost(dent) (dtopd(dent)->state)
++# define sbt(sb) ((sb)->s_type->name)
++
++#define IS_WRITE_FLAG(flag) (flag & (O_RDWR | O_WRONLY | O_APPEND))
++#define IS_COPY_FLAG(flag) (flag & (COPY_FLAGS))
++
++/* macros to simplify non-SCA code */
++#  define MALLOC_PAGE_POINTERS(hidden_pages, num_hidden_pages)
++#  define MALLOC_PAGEDATA_POINTERS(hidden_pages_data, num_hidden_pages)
++#  define FREE_PAGE_POINTERS(hidden_pages, num)
++#  define FREE_PAGEDATA_POINTERS(hidden_pages_data, num)
++#  define FOR_EACH_PAGE
++#  define CURRENT_HIDDEN_PAGE hidden_page
++#  define CURRENT_HIDDEN_PAGEDATA hidden_page_data
++#  define CURRENT_HIDDEN_PAGEINDEX page->index
++
++/*
++ * EXTERNALS:
++ */
++extern struct file_operations mini_fo_main_fops;
++extern struct file_operations mini_fo_dir_fops;
++extern struct inode_operations mini_fo_main_iops;
++extern struct inode_operations mini_fo_dir_iops;
++extern struct inode_operations mini_fo_symlink_iops;
++extern struct super_operations mini_fo_sops;
++extern struct dentry_operations mini_fo_dops;
++extern struct vm_operations_struct mini_fo_shared_vmops;
++extern struct vm_operations_struct mini_fo_private_vmops;
++extern struct address_space_operations mini_fo_aops;
++
++#if 0 /* unused by mini_fo */
++extern int mini_fo_interpose(dentry_t *hidden_dentry, dentry_t *this_dentry, super_block_t *sb, int flag);
++#if defined(FIST_FILTER_DATA) || defined(FIST_FILTER_SCA)
++extern page_t *mini_fo_get1page(file_t *file, int index);
++extern int mini_fo_fill_zeros(file_t *file, page_t *page, unsigned from);
++# endif /* FIST_FILTER_DATA || FIST_FILTER_SCA */
++
++
++#  define mini_fo_hidden_dentry(d) __mini_fo_hidden_dentry(__FILE__,__FUNCTION__,__LINE__,(d))
++#  define mini_fo_hidden_sto_dentry(d) __mini_fo_hidden_sto_dentry(__FILE__,__FUNCTION__,__LINE__,(d))
++
++extern dentry_t *__mini_fo_hidden_dentry(char *file, char *func, int line, dentry_t *this_dentry);
++extern dentry_t *__mini_fo_hidden_sto_dentry(char *file, char *func, int line, dentry_t *this_dentry);
++
++extern int mini_fo_read_file(const char *filename, void *buf, int len);
++extern int mini_fo_write_file(const char *filename, void *buf, int len);
++extern dentry_t *fist_lookup(dentry_t *dir, const char *name, vnode_t **out, uid_t uid, gid_t gid);
++#endif /* unused by mini_fo */
++
++/* state transition functions */
++extern int nondir_unmod_to_mod(dentry_t *dentry, int cp_flag);
++extern int nondir_del_rew_to_del(dentry_t *dentry);
++extern int nondir_creat_to_del(dentry_t *dentry);
++extern int nondir_mod_to_del(dentry_t *dentry);
++extern int nondir_unmod_to_del(dentry_t *dentry);
++
++extern int dir_unmod_to_mod(dentry_t *dentry);
++
++/* rename specials */
++extern int rename_directory(inode_t *old_dir, dentry_t *old_dentry, inode_t *new_dir, dentry_t *new_dentry);
++extern int rename_nondir(inode_t *old_dir, dentry_t *old_dentry, inode_t *new_dir, dentry_t *new_dentry);
++
++/* misc stuff */
++extern int mini_fo_tri_interpose(dentry_t *hidden_dentry,
++				 dentry_t *hidden_sto_dentry,
++				 dentry_t *dentry,
++				 super_block_t *sb, int flag);
++
++extern int mini_fo_cp_cont(dentry_t *tgt_dentry, struct vfsmount *tgt_mnt,
++			   dentry_t *src_dentry, struct vfsmount *src_mnt);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++extern int mini_fo_create(inode_t *dir, dentry_t *dentry, int mode, struct nameidata *nd);
++
++extern int create_sto_nod(dentry_t *dentry, int mode, dev_t dev);
++extern int create_sto_reg_file(dentry_t *dentry, int mode, struct nameidata *nd);
++#else
++extern int mini_fo_create(inode_t *dir, dentry_t *dentry, int mode);
++
++extern int create_sto_nod(dentry_t *dentry, int mode, int dev);
++extern int create_sto_reg_file(dentry_t *dentry, int mode);
++#endif
++
++extern int create_sto_dir(dentry_t *dentry, int mode);
++
++extern int exists_in_storage(dentry_t *dentry);
++extern int is_mini_fo_existant(dentry_t *dentry);
++extern int get_neg_sto_dentry(dentry_t *dentry);
++extern int build_sto_structure(dentry_t *dir, dentry_t *dentry);
++extern int get_mini_fo_bpath(dentry_t *dentry, char **bpath, int *bpath_len);
++extern dentry_t *bpath_walk(super_block_t *sb, char *bpath);
++extern int bpath_put(dentry_t *dentry);
++
++/* check_mini_fo types functions */
++extern int check_mini_fo_dentry(dentry_t *dentry);
++extern int check_mini_fo_file(file_t *file);
++extern int check_mini_fo_inode(inode_t *inode);
++
++/* General meta functions, can be called from outside of meta.c */
++extern int meta_build_lists(dentry_t *dentry);
++extern int meta_put_lists(dentry_t *dentry);
++extern int __meta_put_lists(inode_t *inode);
++
++extern int meta_add_d_entry(dentry_t *dentry, const char *name, int len);
++extern int meta_add_r_entry(dentry_t *dentry,
++			    const char *old_name, int old_len,
++			    const char *new_name, int new_len);
++
++extern int meta_remove_r_entry(dentry_t *dentry, const char *name, int len);
++
++extern int meta_check_d_entry(dentry_t *dentry, const char *name, int len);
++extern int __meta_check_d_entry(inode_t *inode, const char *name, int len);
++
++extern char* meta_check_r_entry(dentry_t *dentry, const char *name, int len);
++extern char* __meta_check_r_entry(inode_t *inode, const char *name, int len);
++extern int meta_is_r_entry(dentry_t *dentry, const char *name, int len);
++extern int __meta_is_r_entry(inode_t *inode, const char *name, int len);
++
++/* Specific meta functions, should be called only inside meta.c */
++extern int __meta_put_d_list(inode_t *inode);
++extern int __meta_put_r_list(inode_t *inode);
++
++extern int meta_list_add_d_entry(dentry_t *dentry,
++				 const char *name, int len);
++extern int meta_list_add_r_entry(dentry_t *dentry,
++				 const char *old_name, int old_len,
++				 const char *new_name, int new_len);
++
++extern int meta_list_remove_r_entry(dentry_t *dentry,
++				    const char *name, int len);
++
++extern int __meta_list_remove_r_entry(inode_t *inode,
++				      const char *name, int len);
++
++extern int meta_write_d_entry(dentry_t *dentry, const char *name, int len);
++extern int meta_write_r_entry(dentry_t *dentry,
++			      const char *old_name, int old_len,
++			      const char *new_name, int new_len);
++
++extern int meta_sync_lists(dentry_t *dentry);
++extern int meta_sync_d_list(dentry_t *dentry, int app_flag);
++extern int meta_sync_r_list(dentry_t *dentry, int app_flag);
++
++/* ndl stuff */
++extern int ndl_add_entry(struct readdir_data *rd, const char *name, int len);
++extern void ndl_put_list(struct readdir_data *rd);
++extern int ndl_check_entry(struct readdir_data *rd,
++			   const char *name, int len);
++
++
++# define copy_inode_size(dst, src) \
++    dst->i_size = src->i_size; \
++    dst->i_blocks = src->i_blocks;
++
++static inline void
++fist_copy_attr_atime(inode_t *dest, const inode_t *src)
++{
++	ASSERT(dest != NULL);
++	ASSERT(src != NULL);
++	dest->i_atime = src->i_atime;
++}
++static inline void
++fist_copy_attr_times(inode_t *dest, const inode_t *src)
++{
++	ASSERT(dest != NULL);
++	ASSERT(src != NULL);
++	dest->i_atime = src->i_atime;
++	dest->i_mtime = src->i_mtime;
++	dest->i_ctime = src->i_ctime;
++}
++static inline void
++fist_copy_attr_timesizes(inode_t *dest, const inode_t *src)
++{
++	ASSERT(dest != NULL);
++	ASSERT(src != NULL);
++	dest->i_atime = src->i_atime;
++	dest->i_mtime = src->i_mtime;
++	dest->i_ctime = src->i_ctime;
++	copy_inode_size(dest, src);
++}
++static inline void
++fist_copy_attr_all(inode_t *dest, const inode_t *src)
++{
++	ASSERT(dest != NULL);
++	ASSERT(src != NULL);
++	dest->i_mode = src->i_mode;
++	dest->i_nlink = src->i_nlink;
++	dest->i_uid = src->i_uid;
++	dest->i_gid = src->i_gid;
++	dest->i_rdev = src->i_rdev;
++	dest->i_atime = src->i_atime;
++	dest->i_mtime = src->i_mtime;
++	dest->i_ctime = src->i_ctime;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)
++	dest->i_blksize = src->i_blksize;
++#endif
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,12)
++	dest->i_blkbits = src->i_blkbits;
++# endif /* linux 2.4.12 and newer */
++	copy_inode_size(dest, src);
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	dest->i_attr_flags = src->i_attr_flags;
++#else
++	dest->i_flags = src->i_flags;
++#endif
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++/* copied from linux/fs.h */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++static inline void double_lock(struct dentry *d1, struct dentry *d2)
++{
++	struct mutex *m1 = &d1->d_inode->i_mutex;
++	struct mutex *m2 = &d2->d_inode->i_mutex;
++	if (m1 != m2) {
++		if ((unsigned long) m1 < (unsigned long) m2) {
++			struct mutex *tmp = m2;
++			m2 = m1; m1 = tmp;
++		}
++		mutex_lock(m1);
++	}
++	mutex_lock(m2);
++}
++
++static inline void double_unlock(struct dentry *d1, struct dentry *d2)
++{
++	struct mutex *m1 = &d1->d_inode->i_mutex;
++	struct mutex *m2 = &d2->d_inode->i_mutex;
++	mutex_unlock(m1);
++	if (m1 != m2)
++		mutex_unlock(m2);
++	dput(d1);
++	dput(d2);
++}
++
++#else
++static inline void double_down(struct semaphore *s1, struct semaphore *s2)
++{
++        if (s1 != s2) {
++                if ((unsigned long) s1 < (unsigned long) s2) {
++                        struct semaphore *tmp = s2;
++                        s2 = s1; s1 = tmp;
++                }
++                down(s1);
++        }
++        down(s2);
++}
++
++static inline void double_up(struct semaphore *s1, struct semaphore *s2)
++{
++        up(s1);
++        if (s1 != s2)
++                up(s2);
++}
++
++static inline void double_lock(struct dentry *d1, struct dentry *d2)
++{
++        double_down(&d1->d_inode->i_sem, &d2->d_inode->i_sem);
++}
++
++static inline void double_unlock(struct dentry *d1, struct dentry *d2)
++{
++        double_up(&d1->d_inode->i_sem,&d2->d_inode->i_sem);
++        dput(d1);
++        dput(d2);
++}
++#endif   /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) */
++#endif  /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) */
++#endif /* __KERNEL__ */
++
++/*
++ * Definitions for user and kernel code
++ */
++
++/* ioctls */
++
++#endif	/* not __MINI_FO_H_ */
+--- /dev/null
++++ b/fs/mini_fo/mini_fo-merge
+@@ -0,0 +1,180 @@
++#!/bin/bash
++#
++# Copyright (C) 2005 Markus Klotzbuecher <mk@creamnet.de>
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License
++# as published by the Free Software Foundation; either version
++# 2 of the License, or (at your option) any later version.
++#
++
++BASE=
++STO=
++HELP=
++DRYRUN=
++VERBOSE=
++TMP="/tmp/"
++META_NAME="META_dAfFgHE39ktF3HD2sr"
++SKIP_DEL_LIST="skip-delete-list.mini_fo-merge"
++
++COMMAND=
++exec_command()
++{
++    if [ x$DRYRUN == "xset" ]; then
++	echo "  would run: $COMMAND"
++    elif ! [ x$DRYRUN == "xset" ]; then
++	if [ x$VERBOSE == "xset" ]; then
++	    echo "  running: $COMMAND"
++	fi
++	eval $COMMAND
++    fi
++}
++
++usage()
++{
++cat <<EOF
++
++USAGE: $0 -b <base dir> -s <storage dir>
++Version 0.1
++
++This script merges the contents of a mini_fo storage file system back
++to the base file system.
++
++!!! Warning: This will modify the base filesystem and can destroy data
++             if used wrongly.
++
++Options:
++     -b <base dir>
++          the directory of the base file system.
++
++     -s <storage dir>
++          the directory of the storage file system.
++
++     -d   dry run, will not change anything and print the commands that
++          would be executed.
++
++     -t   tmp dir for storing temporary file. default: $TMP
++
++     -v   show what operations are performed.
++
++     -h   displays this message.
++
++EOF
++}
++
++# parse parameters
++while getopts hdvt:b:s: OPTS
++  do
++  case $OPTS in
++      h)  HELP="set";;
++      d)  DRYRUN="set";;
++      v)  VERBOSE="set";;
++      b)  BASE="$OPTARG";;
++      s)  STO="$OPTARG";;
++      t)  TMP="$OPTARG";;
++      ?)  usage
++	  exit 1;;
++  esac
++done
++
++if [ "x$HELP" == "xset" ]; then
++    usage
++    exit -1
++fi
++
++if ! [ -d "$BASE" ] || ! [ -d "$STO" ]; then
++    echo -e "$0:\n Error, -s and/or -b argument missing. type $0 -h for help."
++    exit -1;
++fi
++
++# get full paths
++pushd $STO; STO=`pwd`; popd
++pushd $BASE; BASE=`pwd`; popd
++TMP=${TMP%/}
++
++
++cat<<EOF
++###############################################################################
++# mini_fo-merge
++#
++# base dir:       $BASE
++# storage dir:    $STO
++# meta filename:  $META_NAME
++# dry run:        $DRYRUN
++# verbose:        $VERBOSE
++# tmp files:      $TMP
++###############################################################################
++
++EOF
++
++rm $TMP/$SKIP_DEL_LIST
++
++# first process all renamed dirs
++echo "Merging renamed directories..."
++pushd $STO &> /dev/null
++find . -name $META_NAME -type f -print0  | xargs -0 -e grep  -e '^R ' | tr -s ':R' ' ' | while read ENTRY; do
++    echo "entry: $ENTRY"
++    META_FILE=`echo $ENTRY | cut -d ' ' -f 1`
++    OLD_B_DIR=`echo $ENTRY | cut -d ' ' -f 2 | sed -e 's/\///'`
++    NEW_NAME=`echo $ENTRY | cut -d ' ' -f 3`
++    NEW_B_DIR=`echo $META_FILE | sed -e "s/$META_NAME/$NEW_NAME/" | sed -e 's/^\.\///'`
++    echo "META_FILE: $META_FILE"
++    echo "OLD_B_DIR: $OLD_B_DIR"
++    echo "NEW_NAME: $NEW_NAME"
++    echo  "NEW_B_DIR: $NEW_B_DIR"
++
++    pushd $BASE &> /dev/null
++    # remove an existing dir in storage
++    COMMAND="rm -rf $NEW_B_DIR"; exec_command
++    COMMAND="cp -R $OLD_B_DIR $NEW_B_DIR"; exec_command
++    echo ""
++    popd &> /dev/null
++
++    # remember this dir to exclude it from deleting later
++    echo $NEW_B_DIR >> $TMP/$SKIP_DEL_LIST
++done
++
++# delete all whiteouted files from base
++echo -e "\nDeleting whiteout'ed files from base file system..."
++find . -name $META_NAME -type f -print0  | xargs -0 -e grep  -e '^D ' | sed -e 's/:D//' | while read ENTRY; do
++    META_FILE=`echo $ENTRY | cut -d ' ' -f 1`
++    DEL_NAME=`echo $ENTRY | cut -d ' ' -f 2`
++    DEL_FILE=`echo $META_FILE | sed -e "s/$META_NAME/$DEL_NAME/" | sed -e 's/^\.\///'`
++    grep -x $DEL_FILE $TMP/$SKIP_DEL_LIST &> /dev/null
++    if [ $? -ne 0 ]; then
++	pushd $BASE &> /dev/null
++	COMMAND="rm -rf $DEL_FILE"; exec_command
++	popd &> /dev/null
++    else
++	echo "  excluding: $DEL_FILE as in skip-del-list."
++    fi
++done
++
++# create all dirs and update permissions
++echo -e "\nSetting up directory structures in base file system..."
++find . -type d | sed -e 's/^\.\///' | while read DIR; do
++    PERMS=`stat -c %a $DIR`
++    DIR_UID=`stat -c %u $DIR`
++    DIR_GID=`stat -c %g $DIR`
++    pushd $BASE &> /dev/null
++    if ! [ -d $DIR ]; then
++	COMMAND="mkdir -p $DIR"; exec_command
++    fi
++    COMMAND="chmod $PERMS $DIR"; exec_command
++    COMMAND="chown $DIR_UID:$DIR_GID $DIR"; exec_command
++    popd &> /dev/null
++done
++
++# merge all non-directory files
++echo -e "\nMerging all non-directory files...."
++for i in b c p f l s; do
++    find . -type $i | sed -e 's/^\.\///' | grep -v "$META_NAME" | while read FILE; do
++	pushd $BASE #&> /dev/null
++	COMMAND="cp -df $STO/$FILE $BASE/$FILE"; exec_command
++	popd &> /dev/null
++    done
++done
++popd &> /dev/null
++
++#rm $TMP/$SKIP_DEL_LIST
++
++echo "Done!"
+--- /dev/null
++++ b/fs/mini_fo/mini_fo-overlay
+@@ -0,0 +1,130 @@
++#!/bin/bash
++#
++# Copyright (C) 2005 Markus Klotzbuecher <mk@creamnet.de>
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License
++# as published by the Free Software Foundation; either version
++# 2 of the License, or (at your option) any later version.
++#
++
++HELP=
++SUFF=
++MNTP=
++MNT_DIR="/mnt"
++STO=
++STO_DIR="/tmp"
++BASE=
++
++usage()
++{
++cat <<EOF
++
++Usage: $0 [-s suffix] [-d sto_dir_dir] [-m mount point] base_dir
++Version 0.1
++
++This script overlays the given base directory using the mini_fo file
++system. If only the base directory base_dir is given, $0
++will use a storage directory called "sto-<base_dir_name>" in $STO_DIR,
++and mount point "mini_fo-<base_dir_dir>" in $MNT_DIR.
++
++Options:
++     -s <suffix>
++          add given suffix to storage directory and the mount
++          point. This is usefull for overlaying one base directory
++          several times and avoiding conflicts with storage directory
++          names and mount points.
++
++     -d <sto_dir_dir>
++          change the directory in which the storage directory will be
++          created (default is currently "$STO_DIR".
++
++     -m <mount point>
++          use an alternative directory to create the mini_fo
++          mountpoint (default is currently "$MNT_DIR".
++
++     -h   displays this message.
++
++EOF
++exit 1;
++}
++
++while getopts hm:s:d: OPTS
++  do
++  case $OPTS in
++      s)  SUFF="$OPTARG";;
++      d)  STO_DIR="$OPTARG";;
++      m)  MNT_DIR="$OPTARG";;
++      h)  HELP="set";;
++      ?)  usage
++	  exit 1;;
++  esac
++done
++shift $(($OPTIND - 1))
++
++BASE="$1"
++
++if [ "x$HELP" == "xset" ]; then
++    usage
++    exit -1
++fi
++
++# fix suffix
++if [ "x$SUFF" != "x" ]; then
++    SUFF="-$SUFF"
++fi
++
++# kill trailing slashes
++MNT_DIR=${MNT_DIR%/}
++STO_DIR=${STO_DIR%/}
++BASE=${BASE%/}
++
++
++if ! [ -d "$BASE" ]; then
++    echo "invalid base dir $BASE, run $0 -h for help."
++    exit -1
++fi
++
++# check opts
++if ! [ -d "$MNT_DIR" ]; then
++    echo "invalid mount dir $MNT_DIR, run $0 -h for help."
++    exit -1
++fi
++
++if ! [ -d "$STO_DIR" ]; then
++    echo "invalid sto_dir_dir $STO_DIR, run $0 -h for help."
++    exit -1
++fi
++
++MNTP="$MNT_DIR/mini_fo-`basename $BASE`$SUFF"
++STO="$STO_DIR/sto-`basename $BASE`$SUFF"
++
++# create the mount point if it doesn't exist
++mkdir -p $MNTP
++if [ $? -ne 0 ]; then
++    echo "Error, failed to create mount point $MNTP"
++fi
++
++mkdir -p $STO
++if [ $? -ne 0 ]; then
++    echo "Error, failed to create storage dir $STO"
++fi
++
++# check if fs is already mounted
++mount | grep mini_fo | grep $MNTP &> /dev/null
++if [ $? -eq 0 ]; then
++    echo "Error, existing mini_fo mount at $MNTP."
++    exit -1
++fi
++
++mount | grep mini_fo | grep $STO &> /dev/null
++if [ $? -eq 0 ]; then
++    echo "Error, $STO seems to be used already."
++    exit -1
++fi
++
++# mount
++mount -t mini_fo -o base=$BASE,sto=$STO $BASE $MNTP
++
++if [ $? -ne 0 ]; then
++    echo "Error, mounting failed, maybe no permisson to mount?"
++fi
+--- /dev/null
++++ b/fs/mini_fo/mmap.c
+@@ -0,0 +1,637 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif /* HAVE_CONFIG_H */
++
++#include "fist.h"
++#include "mini_fo.h"
++
++
++#ifdef FIST_COUNT_WRITES
++/* for counting writes in the middle vs. regular writes */
++unsigned long count_writes = 0, count_writes_middle = 0;
++#endif /* FIST_COUNT_WRITES */
++
++/* forward declaration of commit write and prepare write */
++STATIC int mini_fo_commit_write(file_t *file, page_t *page, unsigned from, unsigned to);
++STATIC int mini_fo_prepare_write(file_t *file, page_t *page, unsigned from, unsigned to);
++
++
++/*
++ * Function for handling creation of holes when lseek-ing past the
++ * end of the file and then writing some data.
++ */
++int
++mini_fo_fill_zeros(file_t* file, page_t *page, unsigned from)
++{
++	int err = 0;
++	dentry_t *dentry = file->f_dentry;
++	inode_t *inode = dentry->d_inode;
++	page_t *tmp_page;
++	int index;
++
++	print_entry_location();
++
++	for (index = inode->i_size >> PAGE_CACHE_SHIFT; index < page->index; index++) {
++		tmp_page = mini_fo_get1page(file, index);
++		if (IS_ERR(tmp_page)) {
++			err = PTR_ERR(tmp_page);
++			goto out;
++		}
++
++		/*
++		 * zero out rest of the contents of the page between the appropriate
++		 * offsets.
++		 */
++		memset((char*)page_address(tmp_page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, PAGE_CACHE_SIZE - (inode->i_size & ~PAGE_CACHE_MASK));
++
++		if (! (err = mini_fo_prepare_write(file, tmp_page, 0, PAGE_CACHE_SIZE)))
++			err = mini_fo_commit_write(file, tmp_page, 0, PAGE_CACHE_SIZE);
++
++		page_cache_release(tmp_page);
++		if (err < 0)
++			goto out;
++		if (current->need_resched)
++			schedule();
++	}
++
++	/* zero out appropriate parts of last page */
++
++	/*
++	 * if the encoding type is block, then adjust the 'from' (where the
++	 * zeroing will start) offset appropriately
++	 */
++	from = from & (~(FIST_ENCODING_BLOCKSIZE - 1));
++
++	if ((from - (inode->i_size & ~PAGE_CACHE_MASK)) > 0) {
++
++		memset((char*)page_address(page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, from - (inode->i_size & ~PAGE_CACHE_MASK));
++		if (! (err = mini_fo_prepare_write(file, page, 0, PAGE_CACHE_SIZE)))
++			err = mini_fo_commit_write(file, page, 0, PAGE_CACHE_SIZE);
++
++		if (err < 0)
++			goto out;
++		if (current->need_resched)
++			schedule();
++	}
++
++ out:
++	print_exit_status(err);
++	return err;
++}
++
++
++
++STATIC int
++mini_fo_writepage(page_t *page)
++{
++	int err = -EIO;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	page_t *hidden_page;
++	char *kaddr, *hidden_kaddr;
++
++	print_entry_location();
++
++	inode = page->mapping->host;
++	hidden_inode = itohi(inode);
++
++	/*
++	 * writepage is called when shared mmap'ed files need to write
++	 * their pages, while prepare/commit_write are called from the
++	 * non-paged write() interface.  (However, in 2.3 the two interfaces
++	 * share the same cache, while in 2.2 they didn't.)
++	 *
++	 * So we pretty much have to duplicate much of what commit_write does.
++	 */
++
++	/* find lower page (returns a locked page) */
++	hidden_page = grab_cache_page(hidden_inode->i_mapping, page->index);
++	if (!hidden_page)
++		goto out;
++
++	/* get page address, and encode it */
++	kaddr = (char *) kmap(page);
++	hidden_kaddr = (char*) kmap(hidden_page);
++	mini_fo_encode_block(kaddr, hidden_kaddr, PAGE_CACHE_SIZE, inode, inode->i_sb, page->index);
++	/* if encode_block could fail, then return error */
++	kunmap(page);
++	kunmap(hidden_page);
++
++	/* call lower writepage (expects locked page) */
++	err = hidden_inode->i_mapping->a_ops->writepage(hidden_page);
++
++	/*
++	 * update mtime and ctime of lower level file system
++	 * mini_fo' mtime and ctime are updated by generic_file_write
++	 */
++	hidden_inode->i_mtime = hidden_inode->i_ctime = CURRENT_TIME;
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,1)
++	UnlockPage(hidden_page);	/* b/c grab_cache_page locked it */
++# endif /* kernel older than 2.4.1 */
++	page_cache_release(hidden_page); /* b/c grab_cache_page increased refcnt */
++
++	if (err)
++		ClearPageUptodate(page);
++	else
++		SetPageUptodate(page);
++ out:
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,1)
++	UnlockPage(page);
++# endif /* kernel 2.4.1 and newer */
++	print_exit_status(err);
++	return err;
++}
++
++
++/*
++ * get one page from cache or lower f/s, return error otherwise.
++ * returns unlocked, up-to-date page (if ok), with increased refcnt.
++ */
++page_t *
++mini_fo_get1page(file_t *file, int index)
++{
++	page_t *page;
++	dentry_t *dentry;
++	inode_t *inode;
++	struct address_space *mapping;
++	int err;
++
++	print_entry_location();
++
++	dentry = file->f_dentry; /* CPW: Moved below print_entry_location */
++	inode = dentry->d_inode;
++	mapping = inode->i_mapping;
++
++	fist_dprint(8, "%s: read page index %d pid %d\n", __FUNCTION__, index, current->pid);
++	if (index < 0) {
++		printk("%s BUG: index=%d\n", __FUNCTION__, index);
++		page = ERR_PTR(-EIO);
++		goto out;
++	}
++	page = read_cache_page(mapping,
++			       index,
++			       (filler_t *) mapping->a_ops->readpage,
++			       (void *) file);
++	if (IS_ERR(page))
++		goto out;
++	wait_on_page(page);
++	if (!Page_Uptodate(page)) {
++		lock_page(page);
++		err = mapping->a_ops->readpage(file, page);
++		if (err) {
++			page = ERR_PTR(err);
++			goto out;
++		}
++		wait_on_page(page);
++		if (!Page_Uptodate(page)) {
++			page = ERR_PTR(-EIO);
++			goto out;
++		}
++	}
++
++ out:
++	print_exit_pointer(page);
++	return page;
++}
++
++
++/*
++ * get one page from cache or lower f/s, return error otherwise.
++ * similar to get1page, but doesn't guarantee that it will return
++ * an unlocked page.
++ */
++page_t *
++mini_fo_get1page_cached(file_t *file, int index)
++{
++	page_t *page;
++	dentry_t *dentry;
++	inode_t *inode;
++	struct address_space *mapping;
++	int err;
++
++	print_entry_location();
++
++	dentry = file->f_dentry; /* CPW: Moved below print_entry_location */
++	inode = dentry->d_inode;
++	mapping = inode->i_mapping;
++
++	fist_dprint(8, "%s: read page index %d pid %d\n", __FUNCTION__, index, current->pid);
++	if (index < 0) {
++		printk("%s BUG: index=%d\n", __FUNCTION__, index);
++		page = ERR_PTR(-EIO);
++		goto out;
++	}
++	page = read_cache_page(mapping,
++			       index,
++			       (filler_t *) mapping->a_ops->readpage,
++			       (void *) file);
++	if (IS_ERR(page))
++		goto out;
++
++ out:
++	print_exit_pointer(page);
++	return page;
++}
++
++
++/*
++ * readpage is called from generic_page_read and the fault handler.
++ * If your file system uses generic_page_read for the read op, it
++ * must implement readpage.
++ *
++ * Readpage expects a locked page, and must unlock it.
++ */
++STATIC int
++mini_fo_do_readpage(file_t *file, page_t *page)
++{
++	int err = -EIO;
++	dentry_t *dentry;
++	file_t *hidden_file = NULL;
++	dentry_t *hidden_dentry;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	char *page_data;
++	page_t *hidden_page;
++	char *hidden_page_data;
++	int real_size;
++
++	print_entry_location();
++
++	dentry = file->f_dentry; /* CPW: Moved below print_entry_location */
++	if (ftopd(file) != NULL)
++		hidden_file = ftohf(file);
++	hidden_dentry = dtohd(dentry);
++	inode = dentry->d_inode;
++	hidden_inode = itohi(inode);
++
++	fist_dprint(7, "%s: requesting page %d from file %s\n", __FUNCTION__, page->index, dentry->d_name.name);
++
++	MALLOC_PAGE_POINTERS(hidden_pages, num_hidden_pages);
++	MALLOC_PAGEDATA_POINTERS(hidden_pages_data, num_hidden_pages);
++	FOR_EACH_PAGE
++		CURRENT_HIDDEN_PAGE = NULL;
++
++	/* find lower page (returns a locked page) */
++	FOR_EACH_PAGE {
++		fist_dprint(8, "%s: Current page index = %d\n", __FUNCTION__, CURRENT_HIDDEN_PAGEINDEX);
++		CURRENT_HIDDEN_PAGE = read_cache_page(hidden_inode->i_mapping,
++						      CURRENT_HIDDEN_PAGEINDEX,
++						      (filler_t *) hidden_inode->i_mapping->a_ops->readpage,
++						      (void *) hidden_file);
++		if (IS_ERR(CURRENT_HIDDEN_PAGE)) {
++			err = PTR_ERR(CURRENT_HIDDEN_PAGE);
++			CURRENT_HIDDEN_PAGE = NULL;
++			goto out_release;
++		}
++	}
++
++	/*
++	 * wait for the page data to show up
++	 * (signaled by readpage as unlocking the page)
++	 */
++	FOR_EACH_PAGE {
++		wait_on_page(CURRENT_HIDDEN_PAGE);
++		if (!Page_Uptodate(CURRENT_HIDDEN_PAGE)) {
++			/*
++			 * call readpage() again if we returned from wait_on_page with a
++			 * page that's not up-to-date; that can happen when a partial
++			 * page has a few buffers which are ok, but not the whole
++			 * page.
++			 */
++			lock_page(CURRENT_HIDDEN_PAGE);
++			err = hidden_inode->i_mapping->a_ops->readpage(hidden_file,
++								       CURRENT_HIDDEN_PAGE);
++			if (err) {
++				CURRENT_HIDDEN_PAGE = NULL;
++				goto out_release;
++			}
++			wait_on_page(CURRENT_HIDDEN_PAGE);
++			if (!Page_Uptodate(CURRENT_HIDDEN_PAGE)) {
++				err = -EIO;
++				goto out_release;
++			}
++		}
++	}
++
++	/* map pages, get their addresses */
++	page_data = (char *) kmap(page);
++	FOR_EACH_PAGE
++		CURRENT_HIDDEN_PAGEDATA = (char *) kmap(CURRENT_HIDDEN_PAGE);
++
++	/* if decode_block could fail, then return error */
++	err = 0;
++	real_size = hidden_inode->i_size - (page->index << PAGE_CACHE_SHIFT);
++	if (real_size <= 0)
++		memset(page_data, 0, PAGE_CACHE_SIZE);
++	else if (real_size < PAGE_CACHE_SIZE) {
++		mini_fo_decode_block(hidden_page_data, page_data, real_size, inode, inode->i_sb, page->index);
++		memset(page_data + real_size, 0, PAGE_CACHE_SIZE - real_size);
++	} else
++		mini_fo_decode_block(hidden_page_data, page_data, PAGE_CACHE_SIZE, inode, inode->i_sb, page->index);
++
++	FOR_EACH_PAGE
++		kunmap(CURRENT_HIDDEN_PAGE);
++	kunmap(page);
++
++ out_release:
++	FOR_EACH_PAGE
++		if (CURRENT_HIDDEN_PAGE)
++			page_cache_release(CURRENT_HIDDEN_PAGE); /* undo read_cache_page */
++
++	FREE_PAGE_POINTERS(hidden_pages, num_hidden_pages);
++	FREE_PAGEDATA_POINTERS(hidden_pages_data, num_hidden_pages);
++
++ out:
++	if (err == 0)
++		SetPageUptodate(page);
++	else
++		ClearPageUptodate(page);
++
++	print_exit_status(err);
++	return err;
++}
++
++
++STATIC int
++mini_fo_readpage(file_t *file, page_t *page)
++{
++	int err;
++	print_entry_location();
++
++	err = mini_fo_do_readpage(file, page);
++
++	/*
++	 * we have to unlock our page, b/c we _might_ have gotten a locked page.
++	 * but we no longer have to wakeup on our page here, b/c UnlockPage does
++	 * it
++	 */
++	UnlockPage(page);
++
++	print_exit_status(err);
++	return err;
++}
++
++
++STATIC int
++mini_fo_prepare_write(file_t *file, page_t *page, unsigned from, unsigned to)
++{
++	int err = 0;
++
++	print_entry_location();
++
++	/*
++	 * we call kmap(page) only here, and do the kunmap
++	 * and the actual downcalls, including unlockpage and uncache
++	 * in commit_write.
++	 */
++	kmap(page);
++
++	/* fast path for whole page writes */
++	if (from == 0 && to == PAGE_CACHE_SIZE)
++		goto out;
++	/* read the page to "revalidate" our data */
++	/* call the helper function which doesn't unlock the page */
++	if (!Page_Uptodate(page))
++		err = mini_fo_do_readpage(file, page);
++
++ out:
++	print_exit_status(err);
++	return err;
++}
++
++
++
++STATIC int
++mini_fo_commit_write(file_t *file, page_t *page, unsigned from, unsigned to)
++{
++	int err = -ENOMEM;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	page_t *hidden_page;
++	file_t *hidden_file = NULL;
++	loff_t pos;
++	unsigned bytes = to - from;
++	unsigned hidden_from, hidden_to, hidden_bytes;
++
++	print_entry_location();
++
++	inode = page->mapping->host; /* CPW: Moved below print_entry_location */
++	hidden_inode = itohi(inode);
++
++	ASSERT(file != NULL);
++	/*
++	 * here we have a kmapped page, with data from the user copied
++	 * into it.  we need to encode_block it, and then call the lower
++	 * commit_write.  We also need to simulate same behavior of
++	 * generic_file_write, and call prepare_write on the lower f/s first.
++	 */
++#ifdef FIST_COUNT_WRITES
++	count_writes++;
++# endif /* FIST_COUNT_WRITES */
++
++	/* this is append and/or extend -- we can't have holes so fill them in */
++	if (page->index > (hidden_inode->i_size >> PAGE_CACHE_SHIFT)) {
++		page_t *tmp_page;
++		int index;
++		for (index = hidden_inode->i_size >> PAGE_CACHE_SHIFT; index < page->index; index++) {
++			tmp_page = mini_fo_get1page(file, index);
++			if (IS_ERR(tmp_page)) {
++				err = PTR_ERR(tmp_page);
++				goto out;
++			}
++			/* zero out the contents of the page at the appropriate offsets */
++			memset((char*)page_address(tmp_page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, PAGE_CACHE_SIZE - (inode->i_size & ~PAGE_CACHE_MASK));
++			if (!(err = mini_fo_prepare_write(file, tmp_page, 0, PAGE_CACHE_SIZE)))
++				err = mini_fo_commit_write(file, tmp_page, 0, PAGE_CACHE_SIZE);
++			page_cache_release(tmp_page);
++			if (err < 0)
++				goto out;
++			if (current->need_resched)
++				schedule();
++		}
++	}
++
++	if (ftopd(file) != NULL)
++		hidden_file = ftohf(file);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_inode->i_mutex);
++#else
++	down(&hidden_inode->i_sem);
++#endif
++	/* find lower page (returns a locked page) */
++	hidden_page = grab_cache_page(hidden_inode->i_mapping, page->index);
++	if (!hidden_page)
++		goto out;
++
++#if FIST_ENCODING_BLOCKSIZE > 1
++#  error encoding_blocksize greater than 1 is not yet supported
++# endif /* FIST_ENCODING_BLOCKSIZE > 1 */
++
++	hidden_from = from & (~(FIST_ENCODING_BLOCKSIZE - 1));
++	hidden_to = ((to + FIST_ENCODING_BLOCKSIZE - 1) & (~(FIST_ENCODING_BLOCKSIZE - 1)));
++	if ((page->index << PAGE_CACHE_SHIFT) + to > hidden_inode->i_size) {
++
++		/*
++		 * if this call to commit_write had introduced holes and the code
++		 * for handling holes was invoked, then the beginning of this page
++		 * must be zeroed out
++		 * zero out bytes from 'size_of_file%pagesize' to 'from'.
++		 */
++		if ((hidden_from - (inode->i_size & ~PAGE_CACHE_MASK)) > 0)
++			memset((char*)page_address(page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, hidden_from - (inode->i_size & ~PAGE_CACHE_MASK));
++
++	}
++	hidden_bytes = hidden_to - hidden_from;
++
++	/* call lower prepare_write */
++	err = -EINVAL;
++	if (hidden_inode->i_mapping &&
++	    hidden_inode->i_mapping->a_ops &&
++	    hidden_inode->i_mapping->a_ops->prepare_write)
++		err = hidden_inode->i_mapping->a_ops->prepare_write(hidden_file,
++								    hidden_page,
++								    hidden_from,
++								    hidden_to);
++	if (err)
++		/* don't leave locked pages behind, esp. on an ENOSPC */
++		goto out_unlock;
++
++	fist_dprint(8, "%s: encoding %d bytes\n", __FUNCTION__, hidden_bytes);
++	mini_fo_encode_block((char *) page_address(page) + hidden_from, (char*) page_address(hidden_page) + hidden_from, hidden_bytes, inode, inode->i_sb, page->index);
++	/* if encode_block could fail, then goto unlock and return error */
++
++	/* call lower commit_write */
++	err = hidden_inode->i_mapping->a_ops->commit_write(hidden_file,
++							   hidden_page,
++							   hidden_from,
++							   hidden_to);
++
++	if (err < 0)
++		goto out_unlock;
++
++	err = bytes;	/* convert error to no. of bytes */
++
++	inode->i_blocks = hidden_inode->i_blocks;
++	/* we may have to update i_size */
++	pos = (page->index << PAGE_CACHE_SHIFT) + to;
++	if (pos > inode->i_size)
++		inode->i_size = pos;
++
++	/*
++	 * update mtime and ctime of lower level file system
++	 * mini_fo' mtime and ctime are updated by generic_file_write
++	 */
++	hidden_inode->i_mtime = hidden_inode->i_ctime = CURRENT_TIME;
++
++	mark_inode_dirty_sync(inode);
++
++ out_unlock:
++	UnlockPage(hidden_page);
++	page_cache_release(hidden_page);
++	kunmap(page);		/* kmap was done in prepare_write */
++ out:
++	/* we must set our page as up-to-date */
++	if (err < 0)
++		ClearPageUptodate(page);
++	else
++		SetPageUptodate(page);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_inode->i_mutex);
++#else
++	up(&hidden_inode->i_sem);
++#endif
++	print_exit_status(err);
++	return err;			/* assume all is ok */
++}
++
++
++STATIC int
++mini_fo_bmap(struct address_space *mapping, long block)
++{
++	int err = 0;
++	inode_t *inode;
++	inode_t *hidden_inode;
++
++	print_entry_location();
++
++	inode = (inode_t *) mapping->host;
++	hidden_inode = itohi(inode);
++
++	if (hidden_inode->i_mapping->a_ops->bmap)
++		err = hidden_inode->i_mapping->a_ops->bmap(hidden_inode->i_mapping, block);
++	print_exit_location();
++	return err;
++}
++
++
++/*
++ * This function is copied verbatim from mm/filemap.c.
++ * XXX: It should be simply moved to some header file instead -- bug Al about it!
++ */
++static inline int sync_page(struct page *page)
++{
++	struct address_space *mapping = page->mapping;
++
++	if (mapping && mapping->a_ops && mapping->a_ops->sync_page)
++		return mapping->a_ops->sync_page(page);
++	return 0;
++}
++
++
++/*
++ * XXX: we may not need this function if not FIST_FILTER_DATA.
++ * FIXME: for FIST_FILTER_SCA, get all lower pages and sync them each.
++ */
++STATIC int
++mini_fo_sync_page(page_t *page)
++{
++	int err = 0;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	page_t *hidden_page;
++
++	print_entry_location();
++
++	inode = page->mapping->host; /* CPW: Moved below print_entry_location */
++	hidden_inode = itohi(inode);
++
++	/* find lower page (returns a locked page) */
++	hidden_page = grab_cache_page(hidden_inode->i_mapping, page->index);
++	if (!hidden_page)
++		goto out;
++
++	err = sync_page(hidden_page);
++
++	UnlockPage(hidden_page);	/* b/c grab_cache_page locked it */
++	page_cache_release(hidden_page); /* b/c grab_cache_page increased refcnt */
++
++ out:
++	print_exit_status(err);
++	return err;
++}
+--- /dev/null
++++ b/fs/mini_fo/README
+@@ -0,0 +1,163 @@
++README for the mini_fo overlay file system
++=========================================
++
++
++WHAT IS MINI_FO?
++----------------
++
++mini_fo is a virtual kernel file system that can make read-only
++file systems writable. This is done by redirecting modifying operations
++to a writeable location called "storage directory", and leaving the
++original data in the "base directory" untouched. When reading, the
++file system merges the modifed and original data so that only the
++newest versions will appear. This occurs transparently to the user,
++who can access the data like on any other read-write file system.
++
++Base and storage directories may be located on the same or on
++different partitions and may be of different file system types. While
++the storage directory obviously needs to be writable, the base may or
++may not be writable, what doesn't matter as it will no be modified
++anyway.
++
++
++WHAT IS GOOD FOR?
++-----------------
++
++The primary purpose of the mini_fo file system is to allow easy
++software updates to embedded systems, that often store their root
++file system in a read-only flash file system, but there are many
++more as for example sandboxing, or for allowing live-cds to
++permanently store information.
++
++
++BUILDING
++--------
++This should be simple. Adjust the Makefile to point to the correct
++kernel headers you want to build the module for. Then:
++
++    # make
++
++should build "mini_fo.o" for a 2.4 kernel or "mini_fo.ko" for a 2.6
++kernel.
++
++If you are building the module for you current kernel, you can install
++the module (as root):
++
++    # make install
++
++or uninstall with
++
++    # make uninstall
++
++
++USING THE FILE SYSTEM
++--------------------
++
++the general mount syntax is:
++
++   mount -t mini_fo -o base=<base directory>,sto=<storage directory>\
++                            <base directory> <mount point>
++
++Example:
++
++You have mounted a cdrom to /mnt/cdrom and want to modifiy some files
++on it:
++
++load the module (as root)
++
++    # insmod mini_fo.o for a 2.4 kernel or
++
++    # insmod mini_fo.ko for a 2.6 kernel
++
++
++create a storage dir in tmp and a mountpoint for mini_fo:
++
++    # mkdir /tmp/sto
++    # mkdir /mnt/mini_fo
++
++and mount the mini_fo file system:
++
++    # mount -t mini_fo -o base=/mnt/cdrom,sto=/tmp/sto /mnt/cdrom /mnt/mini_fo
++
++
++Now the data stored on the cd can be accessed via the mini_fo
++mountpoint just like any read-write file system, files can be modified
++and deleted, new ones can be created and so on. When done unmount the
++file system:
++
++    # unmount /mnt/mini_fo
++
++Note that if the file system is mounted again using the same storage
++file system, of course it will appear in the modified state again. If
++you remount it using an new empty storage directory, it will be
++unmodified. Therefore by executing:
++
++    # cd /tmp/sto
++    # rm -rf *
++
++you can nuke all the changes you made to the original file system. But
++ remember NEVER do this while the mini_fo file system is mounted!
++
++
++Alternatively you can use the mini_fo-overlay bash script, that
++simplifies managing mini_fo mounts. See TOOLS Section.
++
++
++TOOLS
++-----
++
++mini_fo-merge (experimental):
++
++This is a bash script that will merge changes contained in the storage
++directory back to the base directory. This allows mini_fo to function
++as a cache file system by overlaying a slow (network, ...) file system
++and using a fast (ramdisk, ...) as storage. When done, changes can be
++merged back to the (slow) base with mini_fo-merge. See "mini_fo-merge
++-h" for details.
++
++It can be usefull for merging changes back after a successfull test
++(patches, software updates...)
++
++
++mini_fo-overlay:
++
++This bash script simplifies managing one or more mini_fo mounts. For
++overlaying a directory called "basedir1", you can just call:
++
++    # mini_fo-overlay basedir1
++
++This will mount mini_fo with "basedir1" as base, "/tmp/sto-basedir1/"
++as storage to "/mnt/mini_fo-basedir1/". It has more options though,
++type "mini_fo-overlay -h" for details.
++
++
++DOCUMENTATION, REPORTING BUGS, GETTING HELP
++-------------------------------------------
++
++Please visit the mini_fo project page at:
++
++http://www.denx.de/twiki/bin/view/Know/MiniFOHome
++
++
++WARNINGS
++--------
++
++Never modify the base or the storage directorys while the mini_fo
++file system is mounted, or you might crash you system. Simply accessing
++and reading should not cause any trouble.
++
++Exporting a mini_fo mount point via NFS has not been tested, and may
++or may not work.
++
++Check the RELEASE_NOTES for details on bugs and features.
++
++
++
++Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++
++This program is free software; you can redistribute it and/or
++modify it under the terms of the GNU General Public License
++as published by the Free Software Foundation; either version
++2 of the License, or (at your option) any later version.
++
++
+--- /dev/null
++++ b/fs/mini_fo/RELEASE_NOTES
+@@ -0,0 +1,111 @@
++Release:	mini_fo-0.6.1 (v0-6-1)
++Date:		21.09.2005
++
++
++Changes:
++--------
++v0-6-1:
++
++- bugfixes (see ChangeLog)
++
++- two helper scripts "mini_fo_merge" and "mini_fo_overlay" (see
++  README for details).
++
++v0-6-0:
++
++- Support for 2.4 and 2.6 (see Makefile)
++
++- Partial hard link support (creating works as expected, but already
++  existing links in the base file system will be treated as if they
++  were individual files).
++
++- Various bugfixes and cleanups.
++
++
++v0-6-0-pre1:
++
++- This is mini_fo-0-6-0-pre1! This release is a complete rewrite of
++  many vital mini_fo parts such as the old whiteout list code which
++  has been replaced by the new META subsystem.
++
++- Light weight directory renaming implemented. This means if a
++  directory is renamed via the mini_fo filesystem this will no longer
++  result in a complete copy in storage, instead only one empty
++  directory will be created. All base filed contained in the original
++  directory stay there until modified.
++
++- Special files (creating, renaming, deleting etc.) now working.
++
++- Many bugfixes and cleanup, mini_fo is now a lot more stable.
++
++
++v0-5-10:
++
++- Final release of the 0-5-* versions. Next will be a complete rewrite
++  of many features. This release contains several bugfixes related to
++  directory renaming.
++
++
++v0-5-10-pre6:
++
++- Lots of cleanup and several bugfixes related to directory deleting
++
++- Directory renaming suddenly works, what is most likely due to the
++  fact tha that "mv" is smart: if the classic rename doesn't work it
++  will assume that source and target file are on different fs and will
++  copy the directory and try to remove the source directory. Until
++  directory removing wasn't implemented, it would fail to do this and
++  rollback.
++  So, directory renaming works for now, but it doesn't yet do what you
++  would expect from a overlay fs, so use with care.
++
++
++v0-5-10-pre5:
++
++- implemented directory deleting
++- made parsing of mount options more stable
++- New format of mount options! (See README)
++- I can't reproduce the unknown panic with 2.4.25 anymore, so I'll
++  happily assume it never existed!
++
++
++Implemented features:
++---------------------
++
++- creating hard links (see BUGS on already existing hard links)
++- lightweight directory renaming
++- renaming device files, pipes, sockets, etc.
++- creating, renaming, deleting of special files
++- deleting directorys
++- general directory reading (simple "ls" )
++- creating files in existing directorys
++- creating directorys
++- renaming files.
++- reading and writing files (involves opening)
++- appending to files (creates copy in storage)
++- deleting files
++- llseek works too, what allows editors to work
++- persistency (a deleted file stay deleted over remounts)
++- use of symbolic links
++- creating of device files
++
++
++Not (yet) implemented features:
++-------------------------------
++
++- full hard link support.
++
++
++
++BUGS:
++-----
++
++Hard links in the base file system will be treated as individual
++files, not as links to one inode.
++
++The main problem with hard links isn't allowing to create them, but
++their pure existence. If you modify a base hard link, the changes made
++will only show up on this link, the other link will remain in the
++original state. I hope to fix this someday. Please note that this does
++not effect the special hard links '.' and '..', that are handled
++seperately by the lower fs.
+--- /dev/null
++++ b/fs/mini_fo/state.c
+@@ -0,0 +1,620 @@
++/*
++ * Copyright (C) 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif /* HAVE_CONFIG_H */
++
++#include "fist.h"
++#include "mini_fo.h"
++
++
++/* create the storage file, setup new states */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++int create_sto_reg_file(dentry_t *dentry, int mode, struct nameidata *nd)
++#else
++int create_sto_reg_file(dentry_t *dentry, int mode)
++#endif
++{
++	int err = 0;
++	inode_t *dir;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++
++	if(exists_in_storage(dentry)) {
++		printk(KERN_CRIT "mini_fo: create_sto_file: wrong type or state.\n");
++		err = -EINVAL;
++		goto out;
++	}
++	err = get_neg_sto_dentry(dentry);
++
++	if (err) {
++		printk(KERN_CRIT "mini_fo: create_sto_file: ERROR getting neg. sto dentry.\n");
++		goto out;
++	}
++
++	dir = dentry->d_parent->d_inode;
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* lock parent */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++        down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = PTR_ERR(hidden_sto_dir_dentry);
++        if (IS_ERR(hidden_sto_dir_dentry))
++                goto out;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	err = vfs_create(hidden_sto_dir_dentry->d_inode,
++			 hidden_sto_dentry,
++			 mode, nd);
++#else
++	err = vfs_create(hidden_sto_dir_dentry->d_inode,
++			 hidden_sto_dentry,
++			 mode);
++#endif
++        if(err) {
++		printk(KERN_CRIT "mini_fo: create_sto_file: ERROR creating sto file.\n");
++                goto out_lock;
++	}
++
++	if(!dtohd2(dentry)->d_inode) {
++		printk(KERN_CRIT "mini_fo: create_sto_file: ERROR creating sto file [2].\n");
++                err = -EINVAL;
++                goto out_lock;
++        }
++
++        /* interpose the new inode */
++        if(dtost(dentry) == DELETED) {
++                dtost(dentry) = DEL_REWRITTEN;
++                err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0);
++                if(err)
++                        goto out_lock;
++        }
++        else if(dtost(dentry) == NON_EXISTANT) {
++                dtost(dentry) = CREATED;
++                err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0);
++                if(err)
++                        goto out_lock;
++        }
++        else if(dtost(dentry) == UNMODIFIED) {
++                dtost(dentry) = MODIFIED;
++                /* interpose on new inode */
++                if(itohi2(dentry->d_inode) != NULL) {
++                        printk(KERN_CRIT "mini_fo: create_sto_file: invalid inode detected.\n");
++                        err = -EINVAL;
++                        goto out_lock;
++                }
++                itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++	}
++	fist_copy_attr_timesizes(dentry->d_parent->d_inode,
++				 hidden_sto_dir_dentry->d_inode);
++
++ out_lock:
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++        dput(hidden_sto_dir_dentry);
++ out:
++	return err;
++}
++
++/* create the sto dir, setup states */
++int create_sto_dir(dentry_t *dentry, int mode)
++{
++	int err = 0;
++	inode_t *dir;
++	dentry_t *hidden_sto_dentry;
++        dentry_t *hidden_sto_dir_dentry;
++
++	/* had to take the "!S_ISDIR(mode))" check out, because it failed */
++	if(exists_in_storage(dentry)) {
++                printk(KERN_CRIT "mini_fo: create_sto_dir: wrong type or state.\\
++n");
++                err = -EINVAL;
++                goto out;
++        }
++
++	err = get_neg_sto_dentry(dentry);
++	if(err) {
++		err = -EINVAL;
++		goto out;
++	}
++
++	dir = dentry->d_parent->d_inode;
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = PTR_ERR(hidden_sto_dir_dentry);
++	if (IS_ERR(hidden_sto_dir_dentry))
++		goto out;
++
++	err = vfs_mkdir(hidden_sto_dir_dentry->d_inode,
++			hidden_sto_dentry,
++			mode);
++	if(err) {
++		printk(KERN_CRIT "mini_fo: create_sto_dir: ERROR creating sto dir.\n");
++		goto out_lock;
++	}
++
++	if(!dtohd2(dentry)->d_inode) {
++		printk(KERN_CRIT "mini_fo: create_sto_dir: ERROR creating sto dir [2].\n");
++		err = -EINVAL;
++		goto out_lock;
++	}
++
++	/* interpose the new inode */
++	if(dtost(dentry) == DELETED) {
++		dtost(dentry) = DEL_REWRITTEN;
++		err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0);
++		if(err)
++			goto out_lock;
++	}
++	else if(dtopd(dentry)->state == NON_EXISTANT) {
++		dtopd(dentry)->state = CREATED;
++		err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0);
++		if(err)
++			goto out_lock;
++	}
++	else if(dtopd(dentry)->state == UNMODIFIED) {
++		dtopd(dentry)->state = MODIFIED;
++		/* interpose on new inode */
++		if(itohi2(dentry->d_inode) != NULL) {
++			printk(KERN_CRIT "mini_fo:  create_sto_dir: ERROR, invalid inode detected.\n");
++			err = -EINVAL;
++			goto out_lock;
++		}
++		itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++	}
++
++	fist_copy_attr_timesizes(dir, hidden_sto_dir_dentry->d_inode);
++
++	/* initalize the wol list */
++	itopd(dentry->d_inode)->deleted_list_size = -1;
++	itopd(dentry->d_inode)->renamed_list_size = -1;
++	meta_build_lists(dentry);
++
++
++ out_lock:
++	/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++ out:
++	return err;
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++int create_sto_nod(dentry_t *dentry, int mode, dev_t dev)
++#else
++int create_sto_nod(dentry_t *dentry, int mode, int dev)
++#endif
++{
++	int err = 0;
++	inode_t *dir;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++
++	if(exists_in_storage(dentry)) {
++		err = -EEXIST;
++		goto out;
++	}
++	err = get_neg_sto_dentry(dentry);
++
++	if (err) {
++                printk(KERN_CRIT "mini_fo: create_sto_nod: ERROR getting neg. sto dentry.\n");
++                goto out;
++        }
++
++	dir = dentry->d_parent->d_inode;
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* lock parent */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = PTR_ERR(hidden_sto_dir_dentry);
++	if (IS_ERR(hidden_sto_dir_dentry))
++		goto out;
++
++	err = vfs_mknod(hidden_sto_dir_dentry->d_inode, hidden_sto_dentry, mode, dev);
++	if(err)
++		goto out_lock;
++
++	if(!dtohd2(dentry)->d_inode) {
++		printk(KERN_CRIT "mini_fo: create_sto_nod: creating storage inode failed [1].\n");
++		err = -EINVAL; /* return something indicating failure */
++		goto out_lock;
++	}
++
++	/* interpose the new inode */
++	if(dtost(dentry) == DELETED) {
++		dtost(dentry) = DEL_REWRITTEN;
++		err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0);
++		if(err)
++			goto out_lock;
++	}
++	else if(dtost(dentry) == NON_EXISTANT) {
++		dtost(dentry) = CREATED;
++		err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0);
++		if(err)
++			goto out_lock;
++	}
++	else if(dtost(dentry) == UNMODIFIED) {
++		dtost(dentry) = MODIFIED;
++		/* interpose on new inode */
++		if(itohi2(dentry->d_inode) != NULL) {
++			printk(KERN_CRIT "mini_fo: create_sto_nod: error, invalid inode detected.\n");
++			err = -EINVAL;
++			goto out_lock;
++		}
++		itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++	}
++
++	fist_copy_attr_timesizes(dir, hidden_sto_dir_dentry->d_inode);
++
++ out_lock:
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++ out:
++	return err;
++}
++
++
++/* unimplemented (and possibly not usefull):
++
++   nondir-del_to_del_rew
++   nondir-non_exist_to_creat
++
++   dir-unmod_to_del
++   dir-mod_to_del
++   dir-creat_to_del
++   dir-del_rew_to_del
++   dir-del_to_del_rew
++   dir-non_exist_to_creat
++*/
++
++
++/* bring a file of any type from state UNMODIFIED to MODIFIED */
++int nondir_unmod_to_mod(dentry_t *dentry, int cp_flag)
++{
++	int err = 0;
++	struct vfsmount *tgt_mnt;
++	struct vfsmount *src_mnt;
++	dentry_t *tgt_dentry;
++	dentry_t *src_dentry;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++
++	check_mini_fo_dentry(dentry);
++
++	if((dtost(dentry) != UNMODIFIED) ||
++	   S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++	err = get_neg_sto_dentry(dentry);
++
++	if (err) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                  ERROR getting neg. sto dentry.\n");
++		goto out;
++	}
++
++	/* create sto file */
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* lock parent */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++        down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = PTR_ERR(hidden_sto_dir_dentry);
++        if (IS_ERR(hidden_sto_dir_dentry))
++                goto out;
++
++	/* handle different types of nondirs */
++	if(S_ISCHR(dentry->d_inode->i_mode) ||
++	   S_ISBLK(dentry->d_inode->i_mode)) {
++		err = vfs_mknod(hidden_sto_dir_dentry->d_inode,
++				hidden_sto_dentry,
++				dtohd(dentry)->d_inode->i_mode,
++				dtohd(dentry)->d_inode->i_rdev);
++	}
++
++	else if(S_ISREG(dentry->d_inode->i_mode)) {
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		err = vfs_create(hidden_sto_dir_dentry->d_inode,
++				 hidden_sto_dentry,
++				 dtohd(dentry)->d_inode->i_mode, NULL);
++#else
++		err = vfs_create(hidden_sto_dir_dentry->d_inode,
++				 hidden_sto_dentry,
++				 dtohd(dentry)->d_inode->i_mode);
++#endif
++	}
++        if(err) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                  ERROR creating sto file.\n");
++                goto out_lock;
++	}
++
++	/* interpose on new inode */
++	if(itohi2(dentry->d_inode) != NULL) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                  ERROR, invalid inode detected.\n");
++		err = -EINVAL;
++		goto out_lock;
++	}
++
++	itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++
++        fist_copy_attr_timesizes(dentry->d_parent->d_inode,
++				 hidden_sto_dir_dentry->d_inode);
++	dtost(dentry) = MODIFIED;
++
++	/* copy contents if regular file and cp_flag = 1 */
++	if((cp_flag == 1) && S_ISREG(dentry->d_inode->i_mode)) {
++
++		/* unlock first */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++		dput(hidden_sto_dir_dentry);
++
++		tgt_dentry = dtohd2(dentry);
++		tgt_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++		src_dentry = dtohd(dentry);
++		src_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt;
++
++		err = mini_fo_cp_cont(tgt_dentry, tgt_mnt,
++				      src_dentry, src_mnt);
++		if(err) {
++			printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                          ERROR copying contents.\n");
++		}
++		goto out;
++	}
++
++ out_lock:
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++        dput(hidden_sto_dir_dentry);
++ out:
++	return err;
++}
++
++/* this function is currently identical to nondir_creat_to_del */
++int nondir_del_rew_to_del(dentry_t *dentry)
++{
++	return nondir_creat_to_del(dentry);
++}
++
++int nondir_creat_to_del(dentry_t *dentry)
++{
++	int err = 0;
++
++	inode_t *hidden_sto_dir_inode;
++	dentry_t *hidden_sto_dir_dentry;
++	dentry_t *hidden_sto_dentry;
++
++	check_mini_fo_dentry(dentry);
++
++	/* for now this function serves for both state DEL_REWRITTEN and
++	 * CREATED */
++	if(!(dtost(dentry) == CREATED || (dtost(dentry) == DEL_REWRITTEN)) ||
++	   S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: nondir_mod_to_del/del_rew_to_del: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++
++	hidden_sto_dir_inode = itohi2(dentry->d_parent->d_inode);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry);*/
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	/* avoid destroying the hidden inode if the file is in use */
++	dget(hidden_sto_dentry);
++	err = vfs_unlink(hidden_sto_dir_inode, hidden_sto_dentry);
++	dput(hidden_sto_dentry);
++	if(!err)
++		d_delete(hidden_sto_dentry);
++
++	/* propagate number of hard-links */
++	dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++
++	dtost(dentry) = NON_EXISTANT;
++
++	/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++
++ out:
++	return err;
++}
++
++int nondir_mod_to_del(dentry_t *dentry)
++{
++	int err;
++	dentry_t *hidden_sto_dentry;
++	inode_t *hidden_sto_dir_inode;
++	dentry_t *hidden_sto_dir_dentry;
++
++	check_mini_fo_dentry(dentry);
++
++	if(dtost(dentry) != MODIFIED ||
++	   S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: nondir_mod_to_del: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++
++	hidden_sto_dir_inode = itohi2(dentry->d_parent->d_inode);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* was hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	/* avoid destroying the hidden inode if the file is in use */
++	dget(hidden_sto_dentry);
++	err = vfs_unlink(hidden_sto_dir_inode, hidden_sto_dentry);
++	dput(hidden_sto_dentry);
++	if(!err)
++		d_delete(hidden_sto_dentry);
++
++	/* propagate number of hard-links */
++	dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++
++	/* dput base dentry, this will relase the inode and free the
++	 * dentry, as we will never need it again. */
++	dput(dtohd(dentry));
++	dtohd(dentry) = NULL;
++	dtost(dentry) = DELETED;
++
++	/* add deleted file to META-file */
++	meta_add_d_entry(dentry->d_parent,
++			 dentry->d_name.name,
++			 dentry->d_name.len);
++
++	/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++
++ out:
++	return err;
++}
++
++int nondir_unmod_to_del(dentry_t *dentry)
++{
++	int err = 0;
++
++	check_mini_fo_dentry(dentry);
++
++	if(dtost(dentry) != UNMODIFIED ||
++	   S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_del: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++
++	 /* next we have to get a negative dentry for the storage file */
++	err = get_neg_sto_dentry(dentry);
++
++	if(err)
++		goto out;
++
++	/* add deleted file to META lists */
++	err = meta_add_d_entry(dentry->d_parent,
++			       dentry->d_name.name,
++			       dentry->d_name.len);
++
++	if(err)
++		goto out;
++
++	/* dput base dentry, this will relase the inode and free the
++	 * dentry, as we will never need it again. */
++	dput(dtohd(dentry));
++	dtohd(dentry) = NULL;
++	dtost(dentry) = DELETED;
++
++ out:
++	return err;
++}
++
++/* bring a dir from state UNMODIFIED to MODIFIED */
++int dir_unmod_to_mod(dentry_t *dentry)
++{
++	int err;
++
++	check_mini_fo_dentry(dentry);
++
++	if(dtost(dentry) != UNMODIFIED ||
++	   !S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: dir_unmod_to_mod: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++
++	/* this creates our dir incl. sto. structure */
++	err = build_sto_structure(dentry->d_parent, dentry);
++	if(err) {
++		printk(KERN_CRIT "mini_fo: dir_unmod_to_mod: \
++                                  build_sto_structure failed.\n");
++		goto out;
++	}
++ out:
++	return err;
++}
++
+--- /dev/null
++++ b/fs/mini_fo/super.c
+@@ -0,0 +1,281 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++
++
++STATIC void
++mini_fo_read_inode(inode_t *inode)
++{
++	static struct address_space_operations mini_fo_empty_aops;
++
++	__itopd(inode) = kmalloc(sizeof(struct mini_fo_inode_info), GFP_KERNEL);
++	if (!itopd(inode)) {
++		printk("<0>%s:%s:%d: No kernel memory!\n", __FILE__, __FUNCTION__, __LINE__);
++		ASSERT(NULL);
++	}
++	itohi(inode) = NULL;
++	itohi2(inode) = NULL;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	inode->i_version++;
++#else
++	inode->i_version = ++event;	/* increment inode version */
++#endif
++	inode->i_op = &mini_fo_main_iops;
++	inode->i_fop = &mini_fo_main_fops;
++#if 0
++	/*
++	 * XXX: To export a file system via NFS, it has to have the
++	 * FS_REQUIRES_DEV flag, so turn it on.  But should we inherit it from
++	 * the lower file system, or can we allow our file system to be exported
++	 * even if the lower one cannot be natively exported.
++	 */
++	inode->i_sb->s_type->fs_flags |= FS_REQUIRES_DEV;
++	/*
++	 * OK, the above was a hack, which is now turned off because it may
++	 * cause a panic/oops on some systems.  The correct way to export a
++	 * "nodev" filesystem is via using nfs-utils > 1.0 and the "fsid=" export
++	 * parameter, which requires 2.4.20 or later.
++	 */
++#endif
++	/* I don't think ->a_ops is ever allowed to be NULL */
++	inode->i_mapping->a_ops = &mini_fo_empty_aops;
++}
++
++
++#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
++/*
++ * No need to call write_inode() on the lower inode, as it
++ * will have been marked 'dirty' anyway. But we might need
++ * to write some of our own stuff to disk.
++ */
++STATIC void
++mini_fo_write_inode(inode_t *inode, int sync)
++{
++	print_entry_location();
++	print_exit_location();
++}
++#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++
++
++STATIC void
++mini_fo_put_inode(inode_t *inode)
++{
++	/*
++	 * This is really funky stuff:
++	 * Basically, if i_count == 1, iput will then decrement it and this inode will be destroyed.
++	 * It is currently holding a reference to the hidden inode.
++	 * Therefore, it needs to release that reference by calling iput on the hidden inode.
++	 * iput() _will_ do it for us (by calling our clear_inode), but _only_ if i_nlink == 0.
++	 * The problem is, NFS keeps i_nlink == 1 for silly_rename'd files.
++	 * So we must for our i_nlink to 0 here to trick iput() into calling our clear_inode.
++	 */
++	if (atomic_read(&inode->i_count) == 1)
++		inode->i_nlink = 0;
++}
++
++
++#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
++/*
++ * we now define delete_inode, because there are two VFS paths that may
++ * destroy an inode: one of them calls clear inode before doing everything
++ * else that's needed, and the other is fine.  This way we truncate the inode
++ * size (and its pages) and then clear our own inode, which will do an iput
++ * on our and the lower inode.
++ */
++STATIC void
++mini_fo_delete_inode(inode_t *inode)
++{
++	print_entry_location();
++
++	fist_checkinode(inode, "mini_fo_delete_inode IN");
++	inode->i_size = 0;		/* every f/s seems to do that */
++	clear_inode(inode);
++
++	print_exit_location();
++}
++#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++
++
++/* final actions when unmounting a file system */
++STATIC void
++mini_fo_put_super(super_block_t *sb)
++{
++	if (stopd(sb)) {
++		mntput(stopd(sb)->hidden_mnt);
++		mntput(stopd(sb)->hidden_mnt2);
++
++		/* mk: no! dput(stopd(sb)->base_dir_dentry);
++		   dput(stopd(sb)->storage_dir_dentry); */
++
++		kfree(stopd(sb));
++		__stopd(sb) = NULL;
++	}
++}
++
++
++#ifdef NOT_NEEDED
++/*
++ * This is called in do_umount before put_super.
++ * The superblock lock is not held yet.
++ * We probably do not need to define this or call write_super
++ * on the hidden_sb, because sync_supers() will get to hidden_sb
++ * sooner or later.  But it is also called from file_fsync()...
++ */
++STATIC void
++mini_fo_write_super(super_block_t *sb)
++{
++	return;
++}
++#endif /* NOT_NEEDED */
++
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++mini_fo_statfs(struct dentry *d, struct kstatfs *buf)
++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_statfs(super_block_t *sb, struct kstatfs *buf)
++#else
++mini_fo_statfs(super_block_t *sb, struct statfs *buf)
++#endif
++{
++	int err = 0;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++	struct dentry *hidden_d;
++
++	hidden_d = dtohd(d);
++	err = vfs_statfs(hidden_d, buf);
++#else
++	super_block_t *hidden_sb;
++
++	hidden_sb = stohs(sb);
++	err = vfs_statfs(hidden_sb, buf);
++#endif
++
++	return err;
++}
++
++
++/*
++ * XXX: not implemented.  This is not allowed yet.
++ * Should we call this on the hidden_sb?  Probably not.
++ */
++STATIC int
++mini_fo_remount_fs(super_block_t *sb, int *flags, char *data)
++{
++	//printk(KERN_CRIT "mini_fo_remount_fs: WARNING, this function is umimplemented.\n");
++	return -ENOSYS;
++}
++
++
++/*
++ * Called by iput() when the inode reference count reached zero
++ * and the inode is not hashed anywhere.  Used to clear anything
++ * that needs to be, before the inode is completely destroyed and put
++ * on the inode free list.
++ */
++STATIC void
++mini_fo_clear_inode(inode_t *inode)
++{
++	/*
++	 * Decrement a reference to a hidden_inode, which was incremented
++	 * by our read_inode when it was created initially.
++	 */
++
++	/* release the wol_list */
++	if(S_ISDIR(inode->i_mode)) {
++		__meta_put_lists(inode);
++	}
++
++	/* mk: fan out fun */
++	if(itohi(inode))
++		iput(itohi(inode));
++	if(itohi2(inode))
++		iput(itohi2(inode));
++
++	// XXX: why this assertion fails?
++	// because it doesn't like us
++	// ASSERT((inode->i_state & I_DIRTY) == 0);
++	kfree(itopd(inode));
++	__itopd(inode) = NULL;
++}
++
++
++/*
++ * Called in do_umount() if the MNT_FORCE flag was used and this
++ * function is defined.  See comment in linux/fs/super.c:do_umount().
++ * Used only in nfs, to kill any pending RPC tasks, so that subsequent
++ * code can actually succeed and won't leave tasks that need handling.
++ *
++ * PS. I wonder if this is somehow useful to undo damage that was
++ * left in the kernel after a user level file server (such as amd)
++ * dies.
++ */
++STATIC void
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++mini_fo_umount_begin(struct vfsmount *mnt, int flags)
++{
++	struct vfsmount *hidden_mnt;
++
++	hidden_mnt = stopd(mnt->mnt_sb)->hidden_mnt;
++
++	if (hidden_mnt->mnt_sb->s_op->umount_begin)
++		hidden_mnt->mnt_sb->s_op->umount_begin(hidden_mnt, flags);
++
++}
++#else
++mini_fo_umount_begin(super_block_t *sb)
++{
++	super_block_t *hidden_sb;
++
++	hidden_sb = stohs(sb);
++
++	if (hidden_sb->s_op->umount_begin)
++		hidden_sb->s_op->umount_begin(hidden_sb);
++
++}
++#endif
++
++
++struct super_operations mini_fo_sops =
++{
++	read_inode:		mini_fo_read_inode,
++#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
++	write_inode:	mini_fo_write_inode,
++#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++	put_inode:		mini_fo_put_inode,
++#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
++	delete_inode:	mini_fo_delete_inode,
++#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++	put_super:		mini_fo_put_super,
++	statfs:		mini_fo_statfs,
++	remount_fs:		mini_fo_remount_fs,
++	clear_inode:	mini_fo_clear_inode,
++	umount_begin:	mini_fo_umount_begin,
++};
+--- /dev/null
++++ b/fs/mini_fo/Kconfig
+@@ -0,0 +1,3 @@
++config MINI_FO
++	tristate "Mini fanout overlay filesystem"
++
diff --git a/target/linux/generic/patches-2.6.33/210-mini_fo_2.6.25_fixes.patch b/target/linux/generic/patches-2.6.33/210-mini_fo_2.6.25_fixes.patch
new file mode 100644
index 0000000000..d71e3b6faa
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/210-mini_fo_2.6.25_fixes.patch
@@ -0,0 +1,143 @@
+--- a/fs/mini_fo/main.c
++++ b/fs/mini_fo/main.c
+@@ -79,6 +79,7 @@ mini_fo_tri_interpose(dentry_t *hidden_d
+ 	 * of the new inode's fields
+ 	 */
+ 
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,25)
+ 	/*
+ 	 * original: inode = iget(sb, hidden_inode->i_ino);
+ 	 */
+@@ -87,6 +88,13 @@ mini_fo_tri_interpose(dentry_t *hidden_d
+ 		err = -EACCES;		/* should be impossible??? */
+ 		goto out;
+ 	}
++#else
++	inode = mini_fo_iget(sb, iunique(sb, 25));
++	if (IS_ERR(inode)) {
++		err = PTR_ERR(inode);
++		goto out;
++	}
++#endif
+ 
+ 	/*
+ 	 * interpose the inode if not already interposed
+@@ -184,9 +192,9 @@ mini_fo_parse_options(super_block_t *sb,
+ 				hidden_root = ERR_PTR(err);
+ 				goto out;
+ 			}
+-			hidden_root = nd.dentry;
+-			stopd(sb)->base_dir_dentry = nd.dentry;
+-			stopd(sb)->hidden_mnt = nd.mnt;
++			hidden_root = nd_get_dentry(&nd);
++			stopd(sb)->base_dir_dentry = nd_get_dentry(&nd);
++			stopd(sb)->hidden_mnt = nd_get_mnt(&nd);
+ 
+ 		} else if(!strncmp("sto=", options, 4)) {
+ 			/* parse the storage dir */
+@@ -204,9 +212,9 @@ mini_fo_parse_options(super_block_t *sb,
+ 				hidden_root2 = ERR_PTR(err);
+ 				goto out;
+ 			}
+-			hidden_root2 = nd2.dentry;
+-			stopd(sb)->storage_dir_dentry = nd2.dentry;
+-			stopd(sb)->hidden_mnt2 = nd2.mnt;
++			hidden_root2 = nd_get_dentry(&nd2);
++			stopd(sb)->storage_dir_dentry = nd_get_dentry(&nd2);
++			stopd(sb)->hidden_mnt2 = nd_get_mnt(&nd2);
+ 			stohs2(sb) = hidden_root2->d_sb;
+ 
+ 			/* validate storage dir, this is done in
+--- a/fs/mini_fo/mini_fo.h
++++ b/fs/mini_fo/mini_fo.h
+@@ -302,6 +302,10 @@ extern int mini_fo_tri_interpose(dentry_
+ extern int mini_fo_cp_cont(dentry_t *tgt_dentry, struct vfsmount *tgt_mnt,
+ 			   dentry_t *src_dentry, struct vfsmount *src_mnt);
+ 
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25)
++extern struct inode *mini_fo_iget(struct super_block *sb, unsigned long ino);
++#endif
++
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+ extern int mini_fo_create(inode_t *dir, dentry_t *dentry, int mode, struct nameidata *nd);
+ 
+@@ -501,6 +505,29 @@ static inline void double_unlock(struct 
+ #endif  /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) */
+ #endif /* __KERNEL__ */
+ 
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25)
++static inline dentry_t *nd_get_dentry(struct nameidata *nd)
++{
++	return (nd->path.dentry);
++}
++
++static inline struct vfsmount *nd_get_mnt(struct nameidata *nd)
++{
++	return (nd->path.mnt);
++}
++#else
++static inline dentry_t *nd_get_dentry(struct nameidata *nd)
++{
++	return (nd->dentry);
++}
++
++static inline struct vfsmount *nd_get_mnt(struct nameidata *nd)
++{
++	return (nd->mnt);
++}
++#endif
++
+ /*
+  * Definitions for user and kernel code
+  */
+--- a/fs/mini_fo/super.c
++++ b/fs/mini_fo/super.c
+@@ -262,10 +262,31 @@ mini_fo_umount_begin(super_block_t *sb)
+ }
+ #endif
+ 
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25)
++struct inode *
++mini_fo_iget(struct super_block *sb, unsigned long ino)
++{
++	struct inode *inode;
++
++	inode = iget_locked(sb, ino);
++	if (!inode)
++		return ERR_PTR(-ENOMEM);
++
++	if (!(inode->i_state & I_NEW))
++		return inode;
++
++	mini_fo_read_inode(inode);
++
++	unlock_new_inode(inode);
++	return inode;
++}
++#endif /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25) */
+ 
+ struct super_operations mini_fo_sops =
+ {
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,25)
+ 	read_inode:		mini_fo_read_inode,
++#endif
+ #if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
+ 	write_inode:	mini_fo_write_inode,
+ #endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
+--- a/fs/mini_fo/aux.c
++++ b/fs/mini_fo/aux.c
+@@ -164,11 +164,11 @@ dentry_t *bpath_walk(super_block_t *sb, 
+ 	err = vfs_path_lookup(mnt->mnt_root, mnt, bpath+1, 0, &nd);
+ 
+ 	/* validate */
+-	if (err || !nd.dentry || !nd.dentry->d_inode) {
++	if (err || !nd_get_dentry(&nd) || !nd_get_dentry(&nd)->d_inode) {
+ 		printk(KERN_CRIT "mini_fo: bpath_walk: path_walk failed.\n");
+ 		return NULL;
+ 	}
+-	return nd.dentry;
++	return nd_get_dentry(&nd);
+ }
+ 
+ 
diff --git a/target/linux/generic/patches-2.6.33/211-mini_fo_2.6.25_dentry_open_war.patch b/target/linux/generic/patches-2.6.33/211-mini_fo_2.6.25_dentry_open_war.patch
new file mode 100644
index 0000000000..48a19429b9
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/211-mini_fo_2.6.25_dentry_open_war.patch
@@ -0,0 +1,66 @@
+--- a/fs/mini_fo/meta.c
++++ b/fs/mini_fo/meta.c
+@@ -442,6 +442,11 @@ int meta_write_d_entry(dentry_t *dentry,
+ 			   S_IRUSR | S_IWUSR);
+ #endif
+ 	}
++
++	/* $%& err, is this correct? */
++	meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++	mntget(meta_mnt);
++
+         /* open META-file for writing */
+         meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
+         if(!meta_file || IS_ERR(meta_file)) {
+@@ -535,6 +540,11 @@ int meta_write_r_entry(dentry_t *dentry,
+ 			   meta_dentry, S_IRUSR | S_IWUSR);
+ #endif
+ 	}
++
++	/* $%& err, is this correct? */
++	meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++	mntget(meta_mnt);
++
+         /* open META-file for writing */
+         meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
+         if(!meta_file || IS_ERR(meta_file)) {
+@@ -671,14 +681,16 @@ int meta_sync_d_list(dentry_t *dentry, i
+ 		}
+ 	}
+ 
++	/* $%& err, is this correct? */
++	meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++	mntget(meta_mnt);
++
+         /* open META-file for writing */
+         meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
+                                   ERROR opening meta file.\n");
+-		/* we don't mntget so we dont't mntput (for now)
+-		 * mntput(meta_mnt);
+-		 */
++		mntput(meta_mnt);
+ 		dput(meta_dentry);
+ 		err = -1;
+                 goto out;
+@@ -811,14 +823,16 @@ int meta_sync_r_list(dentry_t *dentry, i
+ 		}
+ 	}
+ 
++	/* $%& err, is this correct? */
++	meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++	mntget(meta_mnt);
++
+         /* open META-file for writing */
+         meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
+                                   ERROR opening meta file.\n");
+-		/* we don't mntget so we dont't mntput (for now)
+-		 * mntput(meta_mnt);
+-		 */
++		mntput(meta_mnt);
+ 		dput(meta_dentry);
+ 		err = -1;
+                 goto out;
diff --git a/target/linux/generic/patches-2.6.33/212-mini_fo_2.6.26_fixes.patch b/target/linux/generic/patches-2.6.33/212-mini_fo_2.6.26_fixes.patch
new file mode 100644
index 0000000000..8bd9ba3244
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/212-mini_fo_2.6.26_fixes.patch
@@ -0,0 +1,37 @@
+--- a/fs/mini_fo/super.c
++++ b/fs/mini_fo/super.c
+@@ -84,6 +84,7 @@ mini_fo_write_inode(inode_t *inode, int 
+ #endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
+ 
+ 
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)
+ STATIC void
+ mini_fo_put_inode(inode_t *inode)
+ {
+@@ -99,6 +100,7 @@ mini_fo_put_inode(inode_t *inode)
+ 	if (atomic_read(&inode->i_count) == 1)
+ 		inode->i_nlink = 0;
+ }
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26) */
+ 
+ 
+ #if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
+@@ -238,7 +240,7 @@ mini_fo_clear_inode(inode_t *inode)
+  * dies.
+  */
+ STATIC void
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26))
+ mini_fo_umount_begin(struct vfsmount *mnt, int flags)
+ {
+ 	struct vfsmount *hidden_mnt;
+@@ -290,7 +292,9 @@ struct super_operations mini_fo_sops =
+ #if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
+ 	write_inode:	mini_fo_write_inode,
+ #endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)
+ 	put_inode:		mini_fo_put_inode,
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26) */
+ #if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
+ 	delete_inode:	mini_fo_delete_inode,
+ #endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
diff --git a/target/linux/generic/patches-2.6.33/213-mini_fo_2.6.27_fixes.patch b/target/linux/generic/patches-2.6.33/213-mini_fo_2.6.27_fixes.patch
new file mode 100644
index 0000000000..f92c18b254
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/213-mini_fo_2.6.27_fixes.patch
@@ -0,0 +1,41 @@
+--- a/fs/mini_fo/inode.c
++++ b/fs/mini_fo/inode.c
+@@ -439,7 +439,7 @@ mini_fo_symlink(inode_t *dir, dentry_t *
+ 	int err=0;
+ 	dentry_t *hidden_sto_dentry;
+ 	dentry_t *hidden_sto_dir_dentry;
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27))
+         umode_t mode;
+ #endif
+ 
+@@ -466,7 +466,7 @@ mini_fo_symlink(inode_t *dir, dentry_t *
+ 	down(&hidden_sto_dir_dentry->d_inode->i_sem);
+ #endif
+ 
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27))
+ 	mode = S_IALLUGO;
+ 	err = vfs_symlink(hidden_sto_dir_dentry->d_inode,
+ 			  hidden_sto_dentry, symname, mode);
+@@ -1128,7 +1128,7 @@ void mini_fo_put_link(struct dentry *den
+ #endif
+ 
+ STATIC int
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27))
+ mini_fo_permission(inode_t *inode, int mask, struct nameidata *nd)
+ #else
+ mini_fo_permission(inode_t *inode, int mask)
+@@ -1150,8 +1150,9 @@ mini_fo_permission(inode_t *inode, int m
+ 	 *	if (err)
+ 	 *		goto out;
+ 	 */
+-
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
++	err = inode_permission(hidden_inode, mask);
++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+ 	err = permission(hidden_inode, mask, nd);
+ #else
+ 	err = permission(hidden_inode, mask);
diff --git a/target/linux/generic/patches-2.6.33/214-mini_fo_2.6.29.patch b/target/linux/generic/patches-2.6.33/214-mini_fo_2.6.29.patch
new file mode 100644
index 0000000000..63d704bf51
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/214-mini_fo_2.6.29.patch
@@ -0,0 +1,96 @@
+--- a/fs/mini_fo/aux.c
++++ b/fs/mini_fo/aux.c
+@@ -236,7 +236,7 @@ int mini_fo_cp_cont(dentry_t *tgt_dentry
+ 	mntget(src_mnt);
+ 
+ 	/* open file write only */
+-	tgt_file = dentry_open(tgt_dentry, tgt_mnt, 0x1);
++	tgt_file = dentry_open(tgt_dentry, tgt_mnt, 0x1, current_cred());
+ 	if(!tgt_file || IS_ERR(tgt_file)) {
+ 		printk(KERN_CRIT "mini_fo_cp_cont: ERROR opening target file.\n");
+ 		err = PTR_ERR(tgt_file);
+@@ -244,7 +244,7 @@ int mini_fo_cp_cont(dentry_t *tgt_dentry
+ 	}
+ 
+ 	/* open file read only */
+-	src_file = dentry_open(src_dentry, src_mnt, 0x0);
++	src_file = dentry_open(src_dentry, src_mnt, 0x0, current_cred());
+ 	if(!src_file || IS_ERR(src_file)) {
+ 		printk(KERN_CRIT "mini_fo_cp_cont: ERROR opening source file.\n");
+ 		err = PTR_ERR(src_file);
+--- a/fs/mini_fo/file.c
++++ b/fs/mini_fo/file.c
+@@ -437,7 +437,7 @@ mini_fo_open(inode_t *inode, file_t *fil
+ 			mntget(stopd(inode->i_sb)->hidden_mnt);
+ 			hidden_file = dentry_open(hidden_dentry,
+ 						  stopd(inode->i_sb)->hidden_mnt,
+-						  hidden_flags);
++						  hidden_flags, file->f_cred);
+ 			if (IS_ERR(hidden_file)) {
+ 				err = PTR_ERR(hidden_file);
+ 				dput(hidden_dentry);
+@@ -479,7 +479,7 @@ mini_fo_open(inode_t *inode, file_t *fil
+ 			mntget(stopd(inode->i_sb)->hidden_mnt);
+ 			hidden_file = dentry_open(hidden_dentry,
+ 						  stopd(inode->i_sb)->hidden_mnt,
+-						  hidden_flags);
++						  hidden_flags, file->f_cred);
+ 			if (IS_ERR(hidden_file)) {
+ 				err = PTR_ERR(hidden_file);
+ 				dput(hidden_dentry);
+@@ -512,7 +512,7 @@ mini_fo_open(inode_t *inode, file_t *fil
+ 	mntget(stopd(inode->i_sb)->hidden_mnt2);
+ 	hidden_sto_file = dentry_open(hidden_sto_dentry,
+ 				      stopd(inode->i_sb)->hidden_mnt2,
+-				      hidden_flags);
++				      hidden_flags, file->f_cred);
+ 
+ 	/* dentry_open dputs the dentry if it fails */
+ 	if (IS_ERR(hidden_sto_file)) {
+--- a/fs/mini_fo/meta.c
++++ b/fs/mini_fo/meta.c
+@@ -56,7 +56,7 @@ int meta_build_lists(dentry_t *dentry)
+ 
+ 
+ 		/* open META-file for reading */
+-		meta_file = dentry_open(meta_dentry, meta_mnt, 0x0);
++		meta_file = dentry_open(meta_dentry, meta_mnt, 0x0, current_cred());
+ 		if(!meta_file || IS_ERR(meta_file)) {
+ 			printk(KERN_CRIT "mini_fo: meta_build_lists: \
+                                           ERROR opening META file.\n");
+@@ -448,7 +448,7 @@ int meta_write_d_entry(dentry_t *dentry,
+ 	mntget(meta_mnt);
+ 
+         /* open META-file for writing */
+-        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1, current_cred());
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
+                                   ERROR opening meta file.\n");
+@@ -546,7 +546,7 @@ int meta_write_r_entry(dentry_t *dentry,
+ 	mntget(meta_mnt);
+ 
+         /* open META-file for writing */
+-        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1, current_cred());
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_write_r_entry: \
+                                   ERROR opening meta file.\n");
+@@ -686,7 +686,7 @@ int meta_sync_d_list(dentry_t *dentry, i
+ 	mntget(meta_mnt);
+ 
+         /* open META-file for writing */
+-        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1, current_cred());
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
+                                   ERROR opening meta file.\n");
+@@ -828,7 +828,7 @@ int meta_sync_r_list(dentry_t *dentry, i
+ 	mntget(meta_mnt);
+ 
+         /* open META-file for writing */
+-        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1, current_cred());
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
+                                   ERROR opening meta file.\n");
diff --git a/target/linux/generic/patches-2.6.33/215-mini_fo_2.6.30.patch b/target/linux/generic/patches-2.6.33/215-mini_fo_2.6.30.patch
new file mode 100644
index 0000000000..2d20920614
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/215-mini_fo_2.6.30.patch
@@ -0,0 +1,157 @@
+--- a/fs/mini_fo/aux.c
++++ b/fs/mini_fo/aux.c
+@@ -86,8 +86,10 @@ int get_neg_sto_dentry(dentry_t *dentry)
+ 	len = dentry->d_name.len;
+ 	name = dentry->d_name.name;
+ 
++	mutex_lock(&dtohd2(dentry->d_parent)->d_inode->i_mutex);
+ 	dtohd2(dentry) =
+ 		lookup_one_len(name, dtohd2(dentry->d_parent), len);
++	mutex_unlock(&dtohd2(dentry->d_parent)->d_inode->i_mutex);
+ 
+  out:
+ 	return err;
+@@ -426,7 +428,9 @@ int build_sto_structure(dentry_t *dir, d
+ 		const unsigned char *name;
+ 		len = dtohd(dentry)->d_name.len;
+ 		name = dtohd(dentry)->d_name.name;
++		mutex_lock(&dtohd2(dir)->d_inode->i_mutex);
+ 		hidden_sto_dentry = lookup_one_len(name, dtohd2(dir), len);
++		mutex_unlock(&dtohd2(dir)->d_inode->i_mutex);
+ 		dtohd2(dentry) = hidden_sto_dentry;
+ 	}
+ 
+--- a/fs/mini_fo/inode.c
++++ b/fs/mini_fo/inode.c
+@@ -113,17 +113,23 @@ mini_fo_lookup(inode_t *dir, dentry_t *d
+ 		hidden_dir_dentry = hidden_dentry->d_parent;
+ 		kfree(bpath);
+ 	}
+-	else if(hidden_dir_dentry && hidden_dir_dentry->d_inode)
++	else if(hidden_dir_dentry && hidden_dir_dentry->d_inode) {
++		mutex_lock(&hidden_dir_dentry->d_inode->i_mutex);
+ 		hidden_dentry =
+ 			lookup_one_len(name, hidden_dir_dentry, namelen);
+-	else
++		mutex_unlock(&hidden_dir_dentry->d_inode->i_mutex);
++	} else {
+ 		hidden_dentry = NULL;
++	}
+ 
+-	if(hidden_sto_dir_dentry && hidden_sto_dir_dentry->d_inode)
++	if(hidden_sto_dir_dentry && hidden_sto_dir_dentry->d_inode) {
++		mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
+ 		hidden_sto_dentry =
+ 			lookup_one_len(name, hidden_sto_dir_dentry, namelen);
+-	else
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++	} else {
+ 		hidden_sto_dentry =  NULL;
++	}
+ 
+ 	/* catch error in lookup */
+ 	if (IS_ERR(hidden_dentry) || IS_ERR(hidden_sto_dentry)) {
+@@ -553,9 +559,11 @@ mini_fo_rmdir(inode_t *dir, dentry_t *de
+ #endif
+ 
+ 		/* Delete an old WOL file contained in the storage dir */
++		mutex_lock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		meta_dentry = lookup_one_len(META_FILENAME,
+ 					     hidden_sto_dentry,
+ 					     strlen(META_FILENAME));
++		mutex_unlock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		if(meta_dentry->d_inode) {
+ 			err = vfs_unlink(hidden_sto_dentry->d_inode, meta_dentry);
+ 			dput(meta_dentry);
+@@ -643,9 +651,11 @@ mini_fo_rmdir(inode_t *dir, dentry_t *de
+ #endif
+ 
+ 		/* Delete an old WOL file contained in the storage dir */
++		mutex_lock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		meta_dentry = lookup_one_len(META_FILENAME,
+ 					     hidden_sto_dentry,
+ 					     strlen(META_FILENAME));
++		mutex_unlock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		if(meta_dentry->d_inode) {
+ 			/* is this necessary? dget(meta_dentry); */
+ 			err = vfs_unlink(hidden_sto_dentry->d_inode,
+@@ -688,9 +698,11 @@ mini_fo_rmdir(inode_t *dir, dentry_t *de
+ #endif
+ 
+ 		/* Delete an old WOL file contained in the storage dir */
++		mutex_lock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		meta_dentry = lookup_one_len(META_FILENAME,
+ 					     hidden_sto_dentry,
+ 					     strlen(META_FILENAME));
++		mutex_unlock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		if(meta_dentry->d_inode) {
+ 			/* is this necessary? dget(meta_dentry); */
+ 			err = vfs_unlink(hidden_sto_dentry->d_inode,
+--- a/fs/mini_fo/meta.c
++++ b/fs/mini_fo/meta.c
+@@ -43,9 +43,11 @@ int meta_build_lists(dentry_t *dentry)
+ 
+   	/* might there be a META-file? */
+ 	if(dtohd2(dentry) && dtohd2(dentry)->d_inode) {
++		mutex_lock(&dtohd2(dentry)->d_inode->i_mutex);
+ 		meta_dentry = lookup_one_len(META_FILENAME,
+ 					     dtohd2(dentry),
+ 					     strlen(META_FILENAME));
++		mutex_unlock(&dtohd2(dentry)->d_inode->i_mutex);
+ 		if(!meta_dentry->d_inode) {
+ 			dput(meta_dentry);
+ 			goto out_ok;
+@@ -426,8 +428,11 @@ int meta_write_d_entry(dentry_t *dentry,
+ 			goto out;
+                 }
+         }
++
++	mutex_lock(&dtohd2(dentry)->d_inode->i_mutex);
+ 	meta_dentry = lookup_one_len(META_FILENAME,
+ 				     dtohd2(dentry), strlen (META_FILENAME));
++	mutex_unlock(&dtohd2(dentry)->d_inode->i_mutex);
+ 
+ 	/* We need to create a META-file */
+         if(!meta_dentry->d_inode) {
+@@ -527,9 +532,13 @@ int meta_write_r_entry(dentry_t *dentry,
+ 			goto out;
+                 }
+         }
++
++	mutex_lock(&dtohd2(dentry)->d_inode->i_mutex);
+ 	meta_dentry = lookup_one_len(META_FILENAME,
+ 				     dtohd2(dentry),
+ 				     strlen (META_FILENAME));
++	mutex_unlock(&dtohd2(dentry)->d_inode->i_mutex);
++
+         if(!meta_dentry->d_inode) {
+                 /* We need to create a META-file */
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+@@ -641,9 +650,13 @@ int meta_sync_d_list(dentry_t *dentry, i
+ 			goto out;
+                 }
+         }
++
++	mutex_lock(&dtohd2(dentry)->d_inode->i_mutex);
+ 	meta_dentry = lookup_one_len(META_FILENAME,
+ 				     dtohd2(dentry),
+ 				     strlen(META_FILENAME));
++	mutex_unlock(&dtohd2(dentry)->d_inode->i_mutex);
++
+         if(!meta_dentry->d_inode) {
+                 /* We need to create a META-file */
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+@@ -784,9 +797,13 @@ int meta_sync_r_list(dentry_t *dentry, i
+ 			goto out;
+                 }
+         }
++
++	mutex_lock(&dtohd2(dentry)->d_inode->i_mutex);
+ 	meta_dentry = lookup_one_len(META_FILENAME,
+ 				     dtohd2(dentry),
+ 				     strlen(META_FILENAME));
++	mutex_unlock(&dtohd2(dentry)->d_inode->i_mutex);
++
+         if(!meta_dentry->d_inode) {
+                 /* We need to create a META-file */
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
diff --git a/target/linux/generic/patches-2.6.33/216-mini_fo_locking.patch b/target/linux/generic/patches-2.6.33/216-mini_fo_locking.patch
new file mode 100644
index 0000000000..4f075920fb
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/216-mini_fo_locking.patch
@@ -0,0 +1,25 @@
+--- a/fs/mini_fo/state.c
++++ b/fs/mini_fo/state.c
+@@ -537,17 +537,17 @@ int nondir_mod_to_del(dentry_t *dentry)
+ 	dtohd(dentry) = NULL;
+ 	dtost(dentry) = DELETED;
+ 
+-	/* add deleted file to META-file */
+-	meta_add_d_entry(dentry->d_parent,
+-			 dentry->d_name.name,
+-			 dentry->d_name.len);
+-
+ 	/* was: unlock_dir(hidden_sto_dir_dentry); */
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
+ 	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
+ #else
+ 	up(&hidden_sto_dir_dentry->d_inode->i_sem);
+ #endif
++	/* add deleted file to META-file */
++	meta_add_d_entry(dentry->d_parent,
++			 dentry->d_name.name,
++			 dentry->d_name.len);
++
+ 	dput(hidden_sto_dir_dentry);
+ 
+  out:
diff --git a/target/linux/generic/patches-2.6.33/219-kobject_uevent.patch b/target/linux/generic/patches-2.6.33/219-kobject_uevent.patch
new file mode 100644
index 0000000000..7e00b224cc
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/219-kobject_uevent.patch
@@ -0,0 +1,42 @@
+--- a/lib/kobject_uevent.c
++++ b/lib/kobject_uevent.c
+@@ -29,7 +29,8 @@ u64 uevent_seqnum;
+ char uevent_helper[UEVENT_HELPER_PATH_LEN] = CONFIG_UEVENT_HELPER_PATH;
+ static DEFINE_SPINLOCK(sequence_lock);
+ #if defined(CONFIG_NET)
+-static struct sock *uevent_sock;
++struct sock *uevent_sock = NULL;
++EXPORT_SYMBOL_GPL(uevent_sock);
+ #endif
+ 
+ /* the strings here must match the enum in include/linux/kobject.h */
+@@ -42,6 +43,18 @@ static const char *kobject_actions[] = {
+ 	[KOBJ_OFFLINE] =	"offline",
+ };
+ 
++u64 uevent_next_seqnum(void)
++{
++	u64 seq;
++
++	spin_lock(&sequence_lock);
++	seq = ++uevent_seqnum;
++	spin_unlock(&sequence_lock);
++
++	return seq;
++}
++EXPORT_SYMBOL_GPL(uevent_next_seqnum);
++
+ /**
+  * kobject_action_type - translate action string to numeric type
+  *
+@@ -201,9 +214,7 @@ int kobject_uevent_env(struct kobject *k
+ 		kobj->state_remove_uevent_sent = 1;
+ 
+ 	/* we will send an event, so request a new sequence number */
+-	spin_lock(&sequence_lock);
+-	seq = ++uevent_seqnum;
+-	spin_unlock(&sequence_lock);
++	seq = uevent_next_seqnum();
+ 	retval = add_uevent_var(env, "SEQNUM=%llu", (unsigned long long)seq);
+ 	if (retval)
+ 		goto exit;
diff --git a/target/linux/generic/patches-2.6.33/220-sound_kconfig.patch b/target/linux/generic/patches-2.6.33/220-sound_kconfig.patch
new file mode 100644
index 0000000000..fb3df254dc
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/220-sound_kconfig.patch
@@ -0,0 +1,11 @@
+--- a/sound/core/Kconfig
++++ b/sound/core/Kconfig
+@@ -8,7 +8,7 @@ config SND_PCM
+ 	select GCD
+ 
+ config SND_HWDEP
+-	tristate
++	tristate "Sound hardware support"
+ 
+ config SND_RAWMIDI
+ 	tristate
diff --git a/target/linux/generic/patches-2.6.33/221-binfmt_elf_gcc4.1.patch b/target/linux/generic/patches-2.6.33/221-binfmt_elf_gcc4.1.patch
new file mode 100644
index 0000000000..aefbe18755
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/221-binfmt_elf_gcc4.1.patch
@@ -0,0 +1,11 @@
+--- a/fs/binfmt_elf.c
++++ b/fs/binfmt_elf.c
+@@ -1165,7 +1165,7 @@ static unsigned long vma_dump_size(struc
+ 	if (FILTER(ELF_HEADERS) &&
+ 	    vma->vm_pgoff == 0 && (vma->vm_flags & VM_READ)) {
+ 		u32 __user *header = (u32 __user *) vma->vm_start;
+-		u32 word;
++		u32 word = 0;
+ 		mm_segment_t fs = get_fs();
+ 		/*
+ 		 * Doing it this way gets the constant folded by GCC.
diff --git a/target/linux/generic/patches-2.6.33/222-partial_eraseblock_write.patch b/target/linux/generic/patches-2.6.33/222-partial_eraseblock_write.patch
new file mode 100644
index 0000000000..0c7672e8be
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/222-partial_eraseblock_write.patch
@@ -0,0 +1,146 @@
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -21,6 +21,8 @@
+ #include <linux/root_dev.h>
+ #include <linux/magic.h>
+ 
++#define MTD_ERASE_PARTIAL	0x8000 /* partition only covers parts of an erase block */
++
+ /* Our partition linked list */
+ static LIST_HEAD(mtd_partitions);
+ 
+@@ -226,13 +228,60 @@ static int part_erase(struct mtd_info *m
+ 		return -EROFS;
+ 	if (instr->addr >= mtd->size)
+ 		return -EINVAL;
++
++	instr->partial_start = false;
++	if (mtd->flags & MTD_ERASE_PARTIAL) {
++		size_t readlen = 0;
++		u64 mtd_ofs;
++
++		instr->erase_buf = kmalloc(part->master->erasesize, GFP_ATOMIC);
++		if (!instr->erase_buf)
++			return -ENOMEM;
++
++		mtd_ofs = part->offset + instr->addr;
++		instr->erase_buf_ofs = do_div(mtd_ofs, part->master->erasesize);
++
++		if (instr->erase_buf_ofs > 0) {
++			instr->addr -= instr->erase_buf_ofs;
++			ret = part->master->read(part->master,
++				instr->addr + part->offset,
++				part->master->erasesize,
++				&readlen, instr->erase_buf);
++
++			instr->partial_start = true;
++		} else {
++			mtd_ofs = part->offset + part->mtd.size;
++			instr->erase_buf_ofs = part->master->erasesize -
++				do_div(mtd_ofs, part->master->erasesize);
++
++			if (instr->erase_buf_ofs > 0) {
++				instr->len += instr->erase_buf_ofs;
++				ret = part->master->read(part->master,
++					part->offset + instr->addr +
++					instr->len - part->master->erasesize,
++					part->master->erasesize, &readlen,
++					instr->erase_buf);
++			} else {
++				ret = 0;
++			}
++		}
++		if (ret < 0) {
++			kfree(instr->erase_buf);
++			return ret;
++		}
++
++	}
++
+ 	instr->addr += part->offset;
+ 	ret = part->master->erase(part->master, instr);
+ 	if (ret) {
+ 		if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
+ 			instr->fail_addr -= part->offset;
+ 		instr->addr -= part->offset;
++		if (mtd->flags & MTD_ERASE_PARTIAL)
++			kfree(instr->erase_buf);
+ 	}
++
+ 	return ret;
+ }
+ 
+@@ -240,7 +289,25 @@ void mtd_erase_callback(struct erase_inf
+ {
+ 	if (instr->mtd->erase == part_erase) {
+ 		struct mtd_part *part = PART(instr->mtd);
++		size_t wrlen = 0;
+ 
++		if (instr->mtd->flags & MTD_ERASE_PARTIAL) {
++			if (instr->partial_start) {
++				part->master->write(part->master,
++					instr->addr, instr->erase_buf_ofs,
++					&wrlen, instr->erase_buf);
++				instr->addr += instr->erase_buf_ofs;
++			} else {
++				instr->len -= instr->erase_buf_ofs;
++				part->master->write(part->master,
++					instr->addr + instr->len,
++					instr->erase_buf_ofs, &wrlen,
++					instr->erase_buf +
++					part->master->erasesize -
++					instr->erase_buf_ofs);
++			}
++			kfree(instr->erase_buf);
++		}
+ 		if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
+ 			instr->fail_addr -= part->offset;
+ 		instr->addr -= part->offset;
+@@ -473,18 +540,24 @@ static struct mtd_part *add_one_partitio
+ 	if ((slave->mtd.flags & MTD_WRITEABLE) &&
+ 	    mtd_mod_by_eb(slave->offset, &slave->mtd)) {
+ 		/* Doesn't start on a boundary of major erase size */
+-		/* FIXME: Let it be writable if it is on a boundary of
+-		 * _minor_ erase size though */
+-		slave->mtd.flags &= ~MTD_WRITEABLE;
+-		printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
+-			part->name);
++		slave->mtd.flags |= MTD_ERASE_PARTIAL;
++		if (((u32) slave->mtd.size) > master->erasesize)
++			slave->mtd.flags &= ~MTD_WRITEABLE;
++		else
++			slave->mtd.erasesize = slave->mtd.size;
+ 	}
+ 	if ((slave->mtd.flags & MTD_WRITEABLE) &&
+-	    mtd_mod_by_eb(slave->mtd.size, &slave->mtd)) {
+-		slave->mtd.flags &= ~MTD_WRITEABLE;
+-		printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
+-			part->name);
+-	}
++	    mtd_mod_by_eb(slave->offset + slave->mtd.size, &slave->mtd)) {
++		slave->mtd.flags |= MTD_ERASE_PARTIAL;
++
++		if ((u32) slave->mtd.size > master->erasesize)
++			slave->mtd.flags &= ~MTD_WRITEABLE;
++		else
++			slave->mtd.erasesize = slave->mtd.size;
++	}
++	if ((slave->mtd.flags & (MTD_ERASE_PARTIAL|MTD_WRITEABLE)) == MTD_ERASE_PARTIAL)
++		printk(KERN_WARNING"mtd: partition \"%s\" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only\n",
++				part->name);
+ 
+ 	slave->mtd.ecclayout = master->ecclayout;
+ 	if (master->block_isbad) {
+--- a/include/linux/mtd/mtd.h
++++ b/include/linux/mtd/mtd.h
+@@ -46,6 +46,10 @@ struct erase_info {
+ 	u_long priv;
+ 	u_char state;
+ 	struct erase_info *next;
++
++	u8 *erase_buf;
++	u32 erase_buf_ofs;
++	bool partial_start;
+ };
+ 
+ struct mtd_erase_region_info {
diff --git a/target/linux/generic/patches-2.6.33/240-packet_socket_type.patch b/target/linux/generic/patches-2.6.33/240-packet_socket_type.patch
new file mode 100644
index 0000000000..0cf56c02b6
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/240-packet_socket_type.patch
@@ -0,0 +1,132 @@
+This patch allows the user to specify desired packet types (outgoing,
+broadcast, unicast, etc.) on packet sockets via setsockopt.
+This can reduce the load in situations where only a limited number
+of packet types are necessary
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+
+--- a/include/linux/if_packet.h
++++ b/include/linux/if_packet.h
+@@ -29,6 +29,8 @@ struct sockaddr_ll {
+ /* These ones are invisible by user level */
+ #define PACKET_LOOPBACK		5		/* MC/BRD frame looped back */
+ #define PACKET_FASTROUTE	6		/* Fastrouted frame	*/
++#define PACKET_MASK_ANY		0xffffffff	/* mask for packet type bits */
++
+ 
+ /* Packet socket options */
+ 
+@@ -46,6 +48,7 @@ struct sockaddr_ll {
+ #define PACKET_RESERVE			12
+ #define PACKET_TX_RING			13
+ #define PACKET_LOSS			14
++#define PACKET_RECV_TYPE		15
+ 
+ struct tpacket_stats {
+ 	unsigned int	tp_packets;
+--- a/net/packet/af_packet.c
++++ b/net/packet/af_packet.c
+@@ -205,6 +205,7 @@ struct packet_sock {
+ 	unsigned int		tp_loss:1;
+ #endif
+ 	struct packet_type	prot_hook ____cacheline_aligned_in_smp;
++	__u8			pkt_type:3;
+ };
+ 
+ struct packet_skb_cb {
+@@ -343,6 +344,7 @@ static int packet_rcv_spkt(struct sk_buf
+ {
+ 	struct sock *sk;
+ 	struct sockaddr_pkt *spkt;
++	struct packet_sock *po;
+ 
+ 	/*
+ 	 *	When we registered the protocol we saved the socket in the data
+@@ -350,6 +352,7 @@ static int packet_rcv_spkt(struct sk_buf
+ 	 */
+ 
+ 	sk = pt->af_packet_priv;
++	po = pkt_sk(sk);
+ 
+ 	/*
+ 	 *	Yank back the headers [hope the device set this
+@@ -362,7 +365,7 @@ static int packet_rcv_spkt(struct sk_buf
+ 	 *	so that this procedure is noop.
+ 	 */
+ 
+-	if (skb->pkt_type == PACKET_LOOPBACK)
++	if (!(po->pkt_type & (1 << skb->pkt_type)))
+ 		goto out;
+ 
+ 	if (!net_eq(dev_net(dev), sock_net(sk)))
+@@ -538,12 +541,12 @@ static int packet_rcv(struct sk_buff *sk
+ 	int skb_len = skb->len;
+ 	unsigned int snaplen, res;
+ 
+-	if (skb->pkt_type == PACKET_LOOPBACK)
+-		goto drop;
+-
+ 	sk = pt->af_packet_priv;
+ 	po = pkt_sk(sk);
+ 
++	if (!(po->pkt_type & (1 << skb->pkt_type)))
++		goto drop;
++
+ 	if (!net_eq(dev_net(dev), sock_net(sk)))
+ 		goto drop;
+ 
+@@ -659,12 +662,12 @@ static int tpacket_rcv(struct sk_buff *s
+ 	struct timeval tv;
+ 	struct timespec ts;
+ 
+-	if (skb->pkt_type == PACKET_LOOPBACK)
+-		goto drop;
+-
+ 	sk = pt->af_packet_priv;
+ 	po = pkt_sk(sk);
+ 
++	if (!(po->pkt_type & (1 << skb->pkt_type)))
++		goto drop;
++
+ 	if (!net_eq(dev_net(dev), sock_net(sk)))
+ 		goto drop;
+ 
+@@ -1386,6 +1389,7 @@ static int packet_create(struct net *net
+ 	spin_lock_init(&po->bind_lock);
+ 	mutex_init(&po->pg_vec_lock);
+ 	po->prot_hook.func = packet_rcv;
++	po->pkt_type = PACKET_MASK_ANY & ~(1 << PACKET_LOOPBACK);
+ 
+ 	if (sock->type == SOCK_PACKET)
+ 		po->prot_hook.func = packet_rcv_spkt;
+@@ -1731,6 +1735,16 @@ packet_setsockopt(struct socket *sock, i
+ 			ret = packet_mc_drop(sk, &mreq);
+ 		return ret;
+ 	}
++	case PACKET_RECV_TYPE:
++	{
++		unsigned int val;
++		if (optlen != sizeof(val))
++			return -EINVAL;
++		if (copy_from_user(&val, optval, sizeof(val)))
++			return -EFAULT;
++		po->pkt_type = val & ~PACKET_LOOPBACK;
++		return 0;
++	}
+ 
+ #ifdef CONFIG_PACKET_MMAP
+ 	case PACKET_RX_RING:
+@@ -1876,6 +1890,13 @@ static int packet_getsockopt(struct sock
+ 
+ 		data = &val;
+ 		break;
++	case PACKET_RECV_TYPE:
++		if (len > sizeof(unsigned int))
++			len = sizeof(unsigned int);
++		val = po->pkt_type;
++
++		data = &val;
++		break;
+ #ifdef CONFIG_PACKET_MMAP
+ 	case PACKET_VERSION:
+ 		if (len > sizeof(int))
diff --git a/target/linux/generic/patches-2.6.33/250-pppoe_header_pad.patch b/target/linux/generic/patches-2.6.33/250-pppoe_header_pad.patch
new file mode 100644
index 0000000000..a2535db60e
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/250-pppoe_header_pad.patch
@@ -0,0 +1,20 @@
+--- a/drivers/net/pppoe.c
++++ b/drivers/net/pppoe.c
+@@ -862,7 +862,7 @@ static int pppoe_sendmsg(struct kiocb *i
+ 		goto end;
+ 
+ 
+-	skb = sock_wmalloc(sk, total_len + dev->hard_header_len + 32,
++	skb = sock_wmalloc(sk, total_len + dev->hard_header_len + 32 + NET_SKB_PAD,
+ 			   0, GFP_KERNEL);
+ 	if (!skb) {
+ 		error = -ENOMEM;
+@@ -870,7 +870,7 @@ static int pppoe_sendmsg(struct kiocb *i
+ 	}
+ 
+ 	/* Reserve space for headers. */
+-	skb_reserve(skb, dev->hard_header_len);
++	skb_reserve(skb, dev->hard_header_len + NET_SKB_PAD);
+ 	skb_reset_network_header(skb);
+ 
+ 	skb->dev = dev;
diff --git a/target/linux/generic/patches-2.6.33/251-atm.patch b/target/linux/generic/patches-2.6.33/251-atm.patch
new file mode 100644
index 0000000000..238d6f81c4
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/251-atm.patch
@@ -0,0 +1,12 @@
+--- a/include/linux/atm.h
++++ b/include/linux/atm.h
+@@ -139,6 +139,9 @@ struct atm_trafprm {
+ 	int		min_pcr;	/* minimum PCR in cells per second */
+ 	int		max_cdv;	/* maximum CDV in microseconds */
+ 	int		max_sdu;	/* maximum SDU in bytes */
++	int		scr;		/* sustained rate in cells per second */
++	int		mbs;		/* maximum burst size (MBS) in cells */
++	int		cdv;		/* Cell delay varition */
+         /* extra params for ABR */
+         unsigned int 	icr;         	/* Initial Cell Rate (24-bit) */
+         unsigned int	tbe;		/* Transient Buffer Exposure (24-bit) */ 
diff --git a/target/linux/generic/patches-2.6.33/260-crypto_optional_tests.patch b/target/linux/generic/patches-2.6.33/260-crypto_optional_tests.patch
new file mode 100644
index 0000000000..3b28502a64
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/260-crypto_optional_tests.patch
@@ -0,0 +1,63 @@
+--- a/crypto/Kconfig
++++ b/crypto/Kconfig
+@@ -96,6 +96,10 @@ config CRYPTO_MANAGER2
+ 	select CRYPTO_BLKCIPHER2
+ 	select CRYPTO_PCOMP
+ 
++config CRYPTO_MANAGER_NO_TESTS
++	bool "Disable internal testsuite to save space"
++	depends on CRYPTO_MANAGER
++
+ config CRYPTO_GF128MUL
+ 	tristate "GF(2^128) multiplication functions (EXPERIMENTAL)"
+ 	depends on EXPERIMENTAL
+--- a/crypto/testmgr.c
++++ b/crypto/testmgr.c
+@@ -47,6 +47,8 @@
+ #define ENCRYPT 1
+ #define DECRYPT 0
+ 
++#ifndef CONFIG_CRYPTO_MANAGER_NO_TESTS
++
+ struct tcrypt_result {
+ 	struct completion completion;
+ 	int err;
+@@ -2359,8 +2361,11 @@ static int alg_find_test(const char *alg
+ 	return -1;
+ }
+ 
++#endif /* CONFIG_CRYPTO_MANAGER_NO_TESTS */
++
+ int alg_test(const char *driver, const char *alg, u32 type, u32 mask)
+ {
++#ifndef CONFIG_CRYPTO_MANAGER_NO_TESTS
+ 	int i;
+ 	int j;
+ 	int rc;
+@@ -2415,5 +2420,8 @@ notest:
+ 	return 0;
+ non_fips_alg:
+ 	return -EINVAL;
++#else /* CONFIG_CRYPTO_MANAGER_NO_TESTS */
++	return 0;
++#endif /* CONFIG_CRYPTO_MANAGER_NO_TESTS */
+ }
+ EXPORT_SYMBOL_GPL(alg_test);
+--- a/crypto/testmgr.h
++++ b/crypto/testmgr.h
+@@ -20,6 +20,8 @@
+ 
+ #include <crypto/compress.h>
+ 
++#ifndef CONFIG_CRYPTO_MANAGER_NO_TESTS
++
+ #define MAX_DIGEST_SIZE		64
+ #define MAX_TAP			8
+ 
+@@ -9552,4 +9554,6 @@ static struct hash_testvec crc32c_tv_tem
+ 	},
+ };
+ 
++#endif /* CONFIG_CRYPTO_MANAGER_NO_TESTS */
++
+ #endif	/* _CRYPTO_TESTMGR_H */
diff --git a/target/linux/generic/patches-2.6.33/400-ledtrig_morse.patch b/target/linux/generic/patches-2.6.33/400-ledtrig_morse.patch
new file mode 100644
index 0000000000..855b3dee53
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/400-ledtrig_morse.patch
@@ -0,0 +1,18 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -337,4 +337,8 @@ config LEDS_TRIGGER_DEFAULT_ON
+ comment "iptables trigger is under Netfilter config (LED target)"
+ 	depends on LEDS_TRIGGERS
+ 
++config LEDS_TRIGGER_MORSE
++	tristate "LED Morse Trigger"
++	depends on LEDS_TRIGGERS
++
+ endif # NEW_LEDS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -44,3 +44,4 @@ obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT)	+= 
+ obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT)	+= ledtrig-backlight.o
+ obj-$(CONFIG_LEDS_TRIGGER_GPIO)		+= ledtrig-gpio.o
+ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
++obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o
diff --git a/target/linux/generic/patches-2.6.33/402-ledtrig_netdev.patch b/target/linux/generic/patches-2.6.33/402-ledtrig_netdev.patch
new file mode 100644
index 0000000000..be1e0cbd7a
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/402-ledtrig_netdev.patch
@@ -0,0 +1,21 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -341,4 +341,11 @@ config LEDS_TRIGGER_MORSE
+ 	tristate "LED Morse Trigger"
+ 	depends on LEDS_TRIGGERS
+ 
++config LEDS_TRIGGER_NETDEV
++	tristate "LED Netdev Trigger"
++	depends on NET && LEDS_TRIGGERS
++	help
++	  This allows LEDs to be controlled by network device activity.
++	  If unsure, say Y.
++
+ endif # NEW_LEDS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -45,3 +45,4 @@ obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT)	+= 
+ obj-$(CONFIG_LEDS_TRIGGER_GPIO)		+= ledtrig-gpio.o
+ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
+ obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o
++obj-$(CONFIG_LEDS_TRIGGER_NETDEV)      += ledtrig-netdev.o
diff --git a/target/linux/generic/patches-2.6.33/410-gpio_buttons.patch b/target/linux/generic/patches-2.6.33/410-gpio_buttons.patch
new file mode 100644
index 0000000000..b762ddea5d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/410-gpio_buttons.patch
@@ -0,0 +1,31 @@
+--- a/drivers/input/misc/Kconfig
++++ b/drivers/input/misc/Kconfig
+@@ -319,4 +319,20 @@ config INPUT_PCAP
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called pcap_keys.
+ 
++config INPUT_GPIO_BUTTONS
++	tristate "Polled GPIO buttons interface"
++	depends on GENERIC_GPIO
++	select INPUT_POLLDEV
++	help
++	  This driver implements support for buttons connected
++	  to GPIO pins of various CPUs (and some other chips).
++
++	  Say Y here if your device has buttons connected
++	  directly to such GPIO pins.  Your board-specific
++	  setup logic must also provide a platform device,
++	  with configuration data saying which GPIOs are used.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called gpio-buttons.
++
+ endif
+--- a/drivers/input/misc/Makefile
++++ b/drivers/input/misc/Makefile
+@@ -30,4 +30,5 @@ obj-$(CONFIG_INPUT_WINBOND_CIR)		+= winb
+ obj-$(CONFIG_INPUT_WISTRON_BTNS)	+= wistron_btns.o
+ obj-$(CONFIG_INPUT_WM831X_ON)		+= wm831x-on.o
+ obj-$(CONFIG_INPUT_YEALINK)		+= yealink.o
++obj-$(CONFIG_INPUT_GPIO_BUTTONS)	+= gpio_buttons.o
+ 
diff --git a/target/linux/generic/patches-2.6.33/411-add-KEY_WPS_BUTTON-definition.patch b/target/linux/generic/patches-2.6.33/411-add-KEY_WPS_BUTTON-definition.patch
new file mode 100644
index 0000000000..c2b68e79bb
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/411-add-KEY_WPS_BUTTON-definition.patch
@@ -0,0 +1,25 @@
+From 492d4f25416528ffb900e6edf0fd70eafd098cfc Mon Sep 17 00:00:00 2001
+From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
+Date: Fri, 26 Feb 2010 00:16:05 -0800
+Subject: [PATCH] Input: add KEY_WPS_BUTTON definition
+
+The new key definition is supposed to be used for buttons that initiate
+WiFi Protected setup sequence:
+
+	http://en.wikipedia.org/wiki/Wi-Fi_Protected_Setup
+
+Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
+---
+ include/linux/input.h |    1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+--- a/include/linux/input.h
++++ b/include/linux/input.h
+@@ -597,6 +597,7 @@ struct input_absinfo {
+ #define KEY_NUMERIC_POUND	0x20b
+ 
+ #define KEY_CAMERA_FOCUS	0x210
++#define KEY_WPS_BUTTON		0x211	/* WiFi Protected Setup key */
+ 
+ /* We avoid low common keys in module aliases so they don't get huge. */
+ #define KEY_MIN_INTERESTING	KEY_MUTE
diff --git a/target/linux/generic/patches-2.6.33/420-gpiodev.patch b/target/linux/generic/patches-2.6.33/420-gpiodev.patch
new file mode 100644
index 0000000000..ebc430f3ec
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/420-gpiodev.patch
@@ -0,0 +1,27 @@
+--- a/drivers/char/Kconfig
++++ b/drivers/char/Kconfig
+@@ -1016,6 +1016,14 @@ config CS5535_GPIO
+ 
+ 	  If compiled as a module, it will be called cs5535_gpio.
+ 
++config GPIO_DEVICE
++	tristate "GPIO device support"
++	depends on GENERIC_GPIO
++	help
++	  Say Y to enable Linux GPIO device support.  This allows control of
++	  GPIO pins using a character device
++
++
+ config RAW_DRIVER
+ 	tristate "RAW driver (/dev/raw/rawN)"
+ 	depends on BLOCK
+--- a/drivers/char/Makefile
++++ b/drivers/char/Makefile
+@@ -95,6 +95,7 @@ obj-$(CONFIG_SCx200_GPIO)	+= scx200_gpio
+ obj-$(CONFIG_PC8736x_GPIO)	+= pc8736x_gpio.o
+ obj-$(CONFIG_NSC_GPIO)		+= nsc_gpio.o
+ obj-$(CONFIG_CS5535_GPIO)	+= cs5535_gpio.o
++obj-$(CONFIG_GPIO_DEVICE)	+= gpio_dev.o
+ obj-$(CONFIG_GPIO_TB0219)	+= tb0219.o
+ obj-$(CONFIG_TELCLOCK)		+= tlclk.o
+ 
diff --git a/target/linux/generic/patches-2.6.33/430-scsi_header_fix.patch b/target/linux/generic/patches-2.6.33/430-scsi_header_fix.patch
new file mode 100644
index 0000000000..59e4333611
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/430-scsi_header_fix.patch
@@ -0,0 +1,17 @@
+--- a/include/scsi/scsi.h
++++ b/include/scsi/scsi.h
+@@ -149,10 +149,10 @@ struct scsi_cmnd;
+ 
+ /* defined in T10 SCSI Primary Commands-2 (SPC2) */
+ struct scsi_varlen_cdb_hdr {
+-	u8 opcode;        /* opcode always == VARIABLE_LENGTH_CMD */
+-	u8 control;
+-	u8 misc[5];
+-	u8 additional_cdb_length;         /* total cdb length - 8 */
++	__u8 opcode;        /* opcode always == VARIABLE_LENGTH_CMD */
++	__u8 control;
++	__u8 misc[5];
++	__u8 additional_cdb_length;         /* total cdb length - 8 */
+ 	__be16 service_action;
+ 	/* service specific data follows */
+ };
diff --git a/target/linux/generic/patches-2.6.33/510-yaffs_support.patch b/target/linux/generic/patches-2.6.33/510-yaffs_support.patch
new file mode 100644
index 0000000000..e490452e58
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/510-yaffs_support.patch
@@ -0,0 +1,17 @@
+--- a/fs/Kconfig
++++ b/fs/Kconfig
+@@ -44,6 +44,7 @@ source "fs/gfs2/Kconfig"
+ source "fs/ocfs2/Kconfig"
+ source "fs/btrfs/Kconfig"
+ source "fs/nilfs2/Kconfig"
++source "fs/yaffs2/Kconfig"
+ 
+ endif # BLOCK
+ 
+--- a/fs/Makefile
++++ b/fs/Makefile
+@@ -125,3 +125,4 @@ obj-$(CONFIG_OCFS2_FS)		+= ocfs2/
+ obj-$(CONFIG_BTRFS_FS)		+= btrfs/
+ obj-$(CONFIG_GFS2_FS)           += gfs2/
+ obj-$(CONFIG_EXOFS_FS)          += exofs/
++obj-$(CONFIG_YAFFS_FS)		+= yaffs2/
diff --git a/target/linux/generic/patches-2.6.33/511-yaffs-cvs-2009-04-24.patch b/target/linux/generic/patches-2.6.33/511-yaffs-cvs-2009-04-24.patch
new file mode 100644
index 0000000000..5c70e79a05
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/511-yaffs-cvs-2009-04-24.patch
@@ -0,0 +1,12344 @@
+--- a/fs/yaffs2/devextras.h
++++ b/fs/yaffs2/devextras.h
+@@ -14,194 +14,135 @@
+  */
+ 
+ /*
+- * This file is just holds extra declarations used during development.
+- * Most of these are from kernel includes placed here so we can use them in
+- * applications.
++ * This file is just holds extra declarations of macros that would normally
++ * be providesd in the Linux kernel. These macros have been written from
++ * scratch but are functionally equivalent to the Linux ones.
+  *
+  */
+ 
+ #ifndef __EXTRAS_H__
+ #define __EXTRAS_H__
+ 
+-#if defined WIN32
+-#define __inline__ __inline
+-#define new newHack
+-#endif
+-
+-#if !(defined __KERNEL__) || (defined WIN32)
+ 
+-/* User space defines */
++#if !(defined __KERNEL__)
+ 
++/* Definition of types */
+ typedef unsigned char __u8;
+ typedef unsigned short __u16;
+ typedef unsigned __u32;
+ 
++#endif
++
+ /*
+- * Simple doubly linked list implementation.
+- *
+- * Some of the internal functions ("__xxx") are useful when
+- * manipulating whole lists rather than single entries, as
+- * sometimes we already know the next/prev entries and we can
+- * generate better code by using them directly rather than
+- * using the generic single-entry routines.
++ * This is a simple doubly linked list implementation that matches the
++ * way the Linux kernel doubly linked list implementation works.
+  */
+ 
+-#define prefetch(x) 1
+-
+-struct list_head {
+-	struct list_head *next, *prev;
++struct ylist_head {
++	struct ylist_head *next; /* next in chain */
++	struct ylist_head *prev; /* previous in chain */
+ };
+ 
+-#define LIST_HEAD_INIT(name) { &(name), &(name) }
+ 
+-#define LIST_HEAD(name) \
+-	struct list_head name = LIST_HEAD_INIT(name)
++/* Initialise a static list */
++#define YLIST_HEAD(name) \
++struct ylist_head name = { &(name), &(name)}
++
+ 
+-#define INIT_LIST_HEAD(ptr) do { \
+-	(ptr)->next = (ptr); (ptr)->prev = (ptr); \
++
++/* Initialise a list head to an empty list */
++#define YINIT_LIST_HEAD(p) \
++do { \
++	(p)->next = (p);\
++	(p)->prev = (p); \
+ } while (0)
+ 
+-/*
+- * Insert a new entry between two known consecutive entries.
+- *
+- * This is only for internal list manipulation where we know
+- * the prev/next entries already!
+- */
+-static __inline__ void __list_add(struct list_head *new,
+-				  struct list_head *prev,
+-				  struct list_head *next)
+-{
+-	next->prev = new;
+-	new->next = next;
+-	new->prev = prev;
+-	prev->next = new;
+-}
+ 
+-/**
+- * list_add - add a new entry
+- * @new: new entry to be added
+- * @head: list head to add it after
+- *
+- * Insert a new entry after the specified head.
+- * This is good for implementing stacks.
+- */
+-static __inline__ void list_add(struct list_head *new, struct list_head *head)
++/* Add an element to a list */
++static __inline__ void ylist_add(struct ylist_head *newEntry,
++				struct ylist_head *list)
+ {
+-	__list_add(new, head, head->next);
+-}
++	struct ylist_head *listNext = list->next;
++
++	list->next = newEntry;
++	newEntry->prev = list;
++	newEntry->next = listNext;
++	listNext->prev = newEntry;
+ 
+-/**
+- * list_add_tail - add a new entry
+- * @new: new entry to be added
+- * @head: list head to add it before
+- *
+- * Insert a new entry before the specified head.
+- * This is useful for implementing queues.
+- */
+-static __inline__ void list_add_tail(struct list_head *new,
+-				     struct list_head *head)
+-{
+-	__list_add(new, head->prev, head);
+ }
+ 
+-/*
+- * Delete a list entry by making the prev/next entries
+- * point to each other.
+- *
+- * This is only for internal list manipulation where we know
+- * the prev/next entries already!
+- */
+-static __inline__ void __list_del(struct list_head *prev,
+-				  struct list_head *next)
++static __inline__ void ylist_add_tail(struct ylist_head *newEntry,
++				 struct ylist_head *list)
+ {
+-	next->prev = prev;
+-	prev->next = next;
++	struct ylist_head *listPrev = list->prev;
++
++	list->prev = newEntry;
++	newEntry->next = list;
++	newEntry->prev = listPrev;
++	listPrev->next = newEntry;
++
+ }
+ 
+-/**
+- * list_del - deletes entry from list.
+- * @entry: the element to delete from the list.
+- * Note: list_empty on entry does not return true after this, the entry is
+- * in an undefined state.
+- */
+-static __inline__ void list_del(struct list_head *entry)
++
++/* Take an element out of its current list, with or without
++ * reinitialising the links.of the entry*/
++static __inline__ void ylist_del(struct ylist_head *entry)
+ {
+-	__list_del(entry->prev, entry->next);
++	struct ylist_head *listNext = entry->next;
++	struct ylist_head *listPrev = entry->prev;
++
++	listNext->prev = listPrev;
++	listPrev->next = listNext;
++
+ }
+ 
+-/**
+- * list_del_init - deletes entry from list and reinitialize it.
+- * @entry: the element to delete from the list.
+- */
+-static __inline__ void list_del_init(struct list_head *entry)
++static __inline__ void ylist_del_init(struct ylist_head *entry)
+ {
+-	__list_del(entry->prev, entry->next);
+-	INIT_LIST_HEAD(entry);
++	ylist_del(entry);
++	entry->next = entry->prev = entry;
+ }
+ 
+-/**
+- * list_empty - tests whether a list is empty
+- * @head: the list to test.
+- */
+-static __inline__ int list_empty(struct list_head *head)
++
++/* Test if the list is empty */
++static __inline__ int ylist_empty(struct ylist_head *entry)
+ {
+-	return head->next == head;
++	return (entry->next == entry);
+ }
+ 
+-/**
+- * list_splice - join two lists
+- * @list: the new list to add.
+- * @head: the place to add it in the first list.
++
++/* ylist_entry takes a pointer to a list entry and offsets it to that
++ * we can find a pointer to the object it is embedded in.
+  */
+-static __inline__ void list_splice(struct list_head *list,
+-				   struct list_head *head)
+-{
+-	struct list_head *first = list->next;
+ 
+-	if (first != list) {
+-		struct list_head *last = list->prev;
+-		struct list_head *at = head->next;
+-
+-		first->prev = head;
+-		head->next = first;
+-
+-		last->next = at;
+-		at->prev = last;
+-	}
+-}
+ 
+-/**
+- * list_entry - get the struct for this entry
+- * @ptr:	the &struct list_head pointer.
+- * @type:	the type of the struct this is embedded in.
+- * @member:	the name of the list_struct within the struct.
+- */
+-#define list_entry(ptr, type, member) \
+-	((type *)((char *)(ptr)-(unsigned long)(&((type *)0)->member)))
+-
+-/**
+- * list_for_each	-	iterate over a list
+- * @pos:	the &struct list_head to use as a loop counter.
+- * @head:	the head for your list.
+- */
+-#define list_for_each(pos, head) \
+-	for (pos = (head)->next, prefetch(pos->next); pos != (head); \
+-        	pos = pos->next, prefetch(pos->next))
+-
+-/**
+- * list_for_each_safe	-	iterate over a list safe against removal
+- *                              of list entry
+- * @pos:	the &struct list_head to use as a loop counter.
+- * @n:		another &struct list_head to use as temporary storage
+- * @head:	the head for your list.
+- */
+-#define list_for_each_safe(pos, n, head) \
+-	for (pos = (head)->next, n = pos->next; pos != (head); \
+-		pos = n, n = pos->next)
++#define ylist_entry(entry, type, member) \
++	((type *)((char *)(entry)-(unsigned long)(&((type *)NULL)->member)))
+ 
+-/*
+- * File types
++
++/* ylist_for_each and list_for_each_safe  iterate over lists.
++ * ylist_for_each_safe uses temporary storage to make the list delete safe
+  */
++
++#define ylist_for_each(itervar, list) \
++	for (itervar = (list)->next; itervar != (list); itervar = itervar->next)
++
++#define ylist_for_each_safe(itervar, saveVar, list) \
++	for (itervar = (list)->next, saveVar = (list)->next->next; \
++		itervar != (list); itervar = saveVar, saveVar = saveVar->next)
++
++
++#if !(defined __KERNEL__)
++
++
++#ifndef WIN32
++#include <sys/stat.h>
++#endif
++
++
++#ifdef CONFIG_YAFFS_PROVIDE_DEFS
++/* File types */
++
++
+ #define DT_UNKNOWN	0
+ #define DT_FIFO		1
+ #define DT_CHR		2
+@@ -212,6 +153,7 @@ static __inline__ void list_splice(struc
+ #define DT_SOCK		12
+ #define DT_WHT		14
+ 
++
+ #ifndef WIN32
+ #include <sys/stat.h>
+ #endif
+@@ -227,10 +169,6 @@ static __inline__ void list_splice(struc
+ #define ATTR_ATIME	16
+ #define ATTR_MTIME	32
+ #define ATTR_CTIME	64
+-#define ATTR_ATIME_SET	128
+-#define ATTR_MTIME_SET	256
+-#define ATTR_FORCE	512	/* Not a change, but a change it */
+-#define ATTR_ATTR_FLAG	1024
+ 
+ struct iattr {
+ 	unsigned int ia_valid;
+@@ -244,21 +182,15 @@ struct iattr {
+ 	unsigned int ia_attr_flags;
+ };
+ 
+-#define KERN_DEBUG
++#endif
+ 
+ #else
+ 
+-#ifndef WIN32
+ #include <linux/types.h>
+-#include <linux/list.h>
+ #include <linux/fs.h>
+ #include <linux/stat.h>
+-#endif
+ 
+ #endif
+ 
+-#if defined WIN32
+-#undef new
+-#endif
+ 
+ #endif
+--- a/fs/yaffs2/Kconfig
++++ b/fs/yaffs2/Kconfig
+@@ -5,7 +5,7 @@
+ config YAFFS_FS
+ 	tristate "YAFFS2 file system support"
+ 	default n
+-	depends on MTD
++	depends on MTD_BLOCK
+ 	select YAFFS_YAFFS1
+ 	select YAFFS_YAFFS2
+ 	help
+@@ -43,7 +43,8 @@ config YAFFS_9BYTE_TAGS
+ 	  format that you need to continue to support.  New data written
+ 	  also uses the older-style format.  Note: Use of this option
+ 	  generally requires that MTD's oob layout be adjusted to use the
+-	  older-style format.  See notes on tags formats and MTD versions.
++	  older-style format.  See notes on tags formats and MTD versions
++	  in yaffs_mtdif1.c.
+ 
+ 	  If unsure, say N.
+ 
+@@ -109,26 +110,6 @@ config YAFFS_DISABLE_LAZY_LOAD
+ 
+ 	  If unsure, say N.
+ 
+-config YAFFS_CHECKPOINT_RESERVED_BLOCKS
+-	int "Reserved blocks for checkpointing"
+-	depends on YAFFS_YAFFS2
+-	default 10
+-	help
+-          Give the number of Blocks to reserve for checkpointing.
+-	  Checkpointing saves the state at unmount so that mounting is
+-	  much faster as a scan of all the flash to regenerate this state
+-	  is not needed.  These Blocks are reserved per partition, so if
+-	  you have very small partitions the default (10) may be a mess
+-	  for you.  You can set this value to 0, but that does not mean
+-	  checkpointing is disabled at all. There only won't be any
+-	  specially reserved blocks for checkpointing, so if there is
+-	  enough free space on the filesystem, it will be used for
+-	  checkpointing.
+-
+-	  If unsure, leave at default (10), but don't wonder if there are
+-	  always 2MB used on your large page device partition (10 x 2k
+-	  pagesize). When using small partitions or when being very small
+-	  on space, you probably want to set this to zero.
+ 
+ config YAFFS_DISABLE_WIDE_TNODES
+ 	bool "Turn off wide tnodes"
+--- a/fs/yaffs2/Makefile
++++ b/fs/yaffs2/Makefile
+@@ -5,7 +5,6 @@
+ obj-$(CONFIG_YAFFS_FS) += yaffs.o
+ 
+ yaffs-y := yaffs_ecc.o yaffs_fs.o yaffs_guts.o yaffs_checkptrw.o
+-yaffs-y += yaffs_packedtags2.o yaffs_nand.o yaffs_qsort.o
++yaffs-y += yaffs_packedtags1.o yaffs_packedtags2.o yaffs_nand.o yaffs_qsort.o
+ yaffs-y += yaffs_tagscompat.o yaffs_tagsvalidity.o
+-yaffs-y += yaffs_mtdif1.o yaffs_packedtags1.o
+-yaffs-y += yaffs_mtdif.o yaffs_mtdif2.o
++yaffs-y += yaffs_mtdif.o yaffs_mtdif1.o yaffs_mtdif2.o
+--- a/fs/yaffs2/moduleconfig.h
++++ b/fs/yaffs2/moduleconfig.h
+@@ -27,12 +27,12 @@
+ 
+ /* Default: Not selected */
+ /* Meaning: Yaffs does its own ECC, rather than using MTD ECC */
+-//#define CONFIG_YAFFS_DOES_ECC
++/* #define CONFIG_YAFFS_DOES_ECC */
+ 
+ /* Default: Not selected */
+ /* Meaning: ECC byte order is 'wrong'.  Only meaningful if */
+ /*          CONFIG_YAFFS_DOES_ECC is set */
+-//#define CONFIG_YAFFS_ECC_WRONG_ORDER
++/* #define CONFIG_YAFFS_ECC_WRONG_ORDER */
+ 
+ /* Default: Selected */
+ /* Meaning: Disables testing whether chunks are erased before writing to them*/
+@@ -54,11 +54,11 @@ that you need to continue to support.  N
+ older-style format.
+ Note: Use of this option generally requires that MTD's oob layout be
+ adjusted to use the older-style format.  See notes on tags formats and
+-MTD versions.
++MTD versions in yaffs_mtdif1.c.
+ */
+ /* Default: Not selected */
+ /* Meaning: Use older-style on-NAND data format with pageStatus byte */
+-#define CONFIG_YAFFS_9BYTE_TAGS
++/* #define CONFIG_YAFFS_9BYTE_TAGS */
+ 
+ #endif /* YAFFS_OUT_OF_TREE */
+ 
+--- a/fs/yaffs2/yaffs_checkptrw.c
++++ b/fs/yaffs2/yaffs_checkptrw.c
+@@ -12,48 +12,43 @@
+  */
+ 
+ const char *yaffs_checkptrw_c_version =
+-    "$Id: yaffs_checkptrw.c,v 1.14 2007-05-15 20:07:40 charles Exp $";
++	"$Id: yaffs_checkptrw.c,v 1.18 2009-03-06 17:20:49 wookey Exp $";
+ 
+ 
+ #include "yaffs_checkptrw.h"
+-
++#include "yaffs_getblockinfo.h"
+ 
+ static int yaffs_CheckpointSpaceOk(yaffs_Device *dev)
+ {
+-
+ 	int blocksAvailable = dev->nErasedBlocks - dev->nReservedBlocks;
+ 
+ 	T(YAFFS_TRACE_CHECKPOINT,
+ 		(TSTR("checkpt blocks available = %d" TENDSTR),
+ 		blocksAvailable));
+ 
+-
+ 	return (blocksAvailable <= 0) ? 0 : 1;
+ }
+ 
+ 
+ static int yaffs_CheckpointErase(yaffs_Device *dev)
+ {
+-
+ 	int i;
+ 
+-
+-	if(!dev->eraseBlockInNAND)
++	if (!dev->eraseBlockInNAND)
+ 		return 0;
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("checking blocks %d to %d"TENDSTR),
+-		dev->internalStartBlock,dev->internalEndBlock));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("checking blocks %d to %d"TENDSTR),
++		dev->internalStartBlock, dev->internalEndBlock));
+ 
+-	for(i = dev->internalStartBlock; i <= dev->internalEndBlock; i++) {
+-		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,i);
+-		if(bi->blockState == YAFFS_BLOCK_STATE_CHECKPOINT){
+-			T(YAFFS_TRACE_CHECKPOINT,(TSTR("erasing checkpt block %d"TENDSTR),i));
+-			if(dev->eraseBlockInNAND(dev,i- dev->blockOffset /* realign */)){
++	for (i = dev->internalStartBlock; i <= dev->internalEndBlock; i++) {
++		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, i);
++		if (bi->blockState == YAFFS_BLOCK_STATE_CHECKPOINT) {
++			T(YAFFS_TRACE_CHECKPOINT, (TSTR("erasing checkpt block %d"TENDSTR), i));
++			if (dev->eraseBlockInNAND(dev, i - dev->blockOffset /* realign */)) {
+ 				bi->blockState = YAFFS_BLOCK_STATE_EMPTY;
+ 				dev->nErasedBlocks++;
+ 				dev->nFreeChunks += dev->nChunksPerBlock;
+-			}
+-			else {
+-				dev->markNANDBlockBad(dev,i);
++			} else {
++				dev->markNANDBlockBad(dev, i);
+ 				bi->blockState = YAFFS_BLOCK_STATE_DEAD;
+ 			}
+ 		}
+@@ -71,23 +66,23 @@ static void yaffs_CheckpointFindNextEras
+ 	int blocksAvailable = dev->nErasedBlocks - dev->nReservedBlocks;
+ 	T(YAFFS_TRACE_CHECKPOINT,
+ 		(TSTR("allocating checkpt block: erased %d reserved %d avail %d next %d "TENDSTR),
+-		dev->nErasedBlocks,dev->nReservedBlocks,blocksAvailable,dev->checkpointNextBlock));
++		dev->nErasedBlocks, dev->nReservedBlocks, blocksAvailable, dev->checkpointNextBlock));
+ 
+-	if(dev->checkpointNextBlock >= 0 &&
+-	   dev->checkpointNextBlock <= dev->internalEndBlock &&
+-	   blocksAvailable > 0){
+-
+-		for(i = dev->checkpointNextBlock; i <= dev->internalEndBlock; i++){
+-			yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,i);
+-			if(bi->blockState == YAFFS_BLOCK_STATE_EMPTY){
++	if (dev->checkpointNextBlock >= 0 &&
++			dev->checkpointNextBlock <= dev->internalEndBlock &&
++			blocksAvailable > 0) {
++
++		for (i = dev->checkpointNextBlock; i <= dev->internalEndBlock; i++) {
++			yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, i);
++			if (bi->blockState == YAFFS_BLOCK_STATE_EMPTY) {
+ 				dev->checkpointNextBlock = i + 1;
+ 				dev->checkpointCurrentBlock = i;
+-				T(YAFFS_TRACE_CHECKPOINT,(TSTR("allocating checkpt block %d"TENDSTR),i));
++				T(YAFFS_TRACE_CHECKPOINT, (TSTR("allocating checkpt block %d"TENDSTR), i));
+ 				return;
+ 			}
+ 		}
+ 	}
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("out of checkpt blocks"TENDSTR)));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("out of checkpt blocks"TENDSTR)));
+ 
+ 	dev->checkpointNextBlock = -1;
+ 	dev->checkpointCurrentBlock = -1;
+@@ -98,30 +93,31 @@ static void yaffs_CheckpointFindNextChec
+ 	int  i;
+ 	yaffs_ExtendedTags tags;
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("find next checkpt block: start:  blocks %d next %d" TENDSTR),
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("find next checkpt block: start:  blocks %d next %d" TENDSTR),
+ 		dev->blocksInCheckpoint, dev->checkpointNextBlock));
+ 
+-	if(dev->blocksInCheckpoint < dev->checkpointMaxBlocks)
+-		for(i = dev->checkpointNextBlock; i <= dev->internalEndBlock; i++){
++	if (dev->blocksInCheckpoint < dev->checkpointMaxBlocks)
++		for (i = dev->checkpointNextBlock; i <= dev->internalEndBlock; i++) {
+ 			int chunk = i * dev->nChunksPerBlock;
+ 			int realignedChunk = chunk - dev->chunkOffset;
+ 
+-			dev->readChunkWithTagsFromNAND(dev,realignedChunk,NULL,&tags);
+-			T(YAFFS_TRACE_CHECKPOINT,(TSTR("find next checkpt block: search: block %d oid %d seq %d eccr %d" TENDSTR),
+-				i, tags.objectId,tags.sequenceNumber,tags.eccResult));
++			dev->readChunkWithTagsFromNAND(dev, realignedChunk,
++					NULL, &tags);
++			T(YAFFS_TRACE_CHECKPOINT, (TSTR("find next checkpt block: search: block %d oid %d seq %d eccr %d" TENDSTR),
++				i, tags.objectId, tags.sequenceNumber, tags.eccResult));
+ 
+-			if(tags.sequenceNumber == YAFFS_SEQUENCE_CHECKPOINT_DATA){
++			if (tags.sequenceNumber == YAFFS_SEQUENCE_CHECKPOINT_DATA) {
+ 				/* Right kind of block */
+ 				dev->checkpointNextBlock = tags.objectId;
+ 				dev->checkpointCurrentBlock = i;
+ 				dev->checkpointBlockList[dev->blocksInCheckpoint] = i;
+ 				dev->blocksInCheckpoint++;
+-				T(YAFFS_TRACE_CHECKPOINT,(TSTR("found checkpt block %d"TENDSTR),i));
++				T(YAFFS_TRACE_CHECKPOINT, (TSTR("found checkpt block %d"TENDSTR), i));
+ 				return;
+ 			}
+ 		}
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("found no more checkpt blocks"TENDSTR)));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("found no more checkpt blocks"TENDSTR)));
+ 
+ 	dev->checkpointNextBlock = -1;
+ 	dev->checkpointCurrentBlock = -1;
+@@ -133,17 +129,17 @@ int yaffs_CheckpointOpen(yaffs_Device *d
+ 
+ 	/* Got the functions we need? */
+ 	if (!dev->writeChunkWithTagsToNAND ||
+-	    !dev->readChunkWithTagsFromNAND ||
+-	    !dev->eraseBlockInNAND ||
+-	    !dev->markNANDBlockBad)
++			!dev->readChunkWithTagsFromNAND ||
++			!dev->eraseBlockInNAND ||
++			!dev->markNANDBlockBad)
+ 		return 0;
+ 
+-	if(forWriting && !yaffs_CheckpointSpaceOk(dev))
++	if (forWriting && !yaffs_CheckpointSpaceOk(dev))
+ 		return 0;
+ 
+-	if(!dev->checkpointBuffer)
+-		dev->checkpointBuffer = YMALLOC_DMA(dev->nDataBytesPerChunk);
+-	if(!dev->checkpointBuffer)
++	if (!dev->checkpointBuffer)
++		dev->checkpointBuffer = YMALLOC_DMA(dev->totalBytesPerChunk);
++	if (!dev->checkpointBuffer)
+ 		return 0;
+ 
+ 
+@@ -159,12 +155,10 @@ int yaffs_CheckpointOpen(yaffs_Device *d
+ 	dev->checkpointNextBlock = dev->internalStartBlock;
+ 
+ 	/* Erase all the blocks in the checkpoint area */
+-	if(forWriting){
+-		memset(dev->checkpointBuffer,0,dev->nDataBytesPerChunk);
++	if (forWriting) {
++		memset(dev->checkpointBuffer, 0, dev->nDataBytesPerChunk);
+ 		dev->checkpointByteOffset = 0;
+ 		return yaffs_CheckpointErase(dev);
+-
+-
+ 	} else {
+ 		int i;
+ 		/* Set to a value that will kick off a read */
+@@ -174,7 +168,7 @@ int yaffs_CheckpointOpen(yaffs_Device *d
+ 		dev->blocksInCheckpoint = 0;
+ 		dev->checkpointMaxBlocks = (dev->internalEndBlock - dev->internalStartBlock)/16 + 2;
+ 		dev->checkpointBlockList = YMALLOC(sizeof(int) * dev->checkpointMaxBlocks);
+-		for(i = 0; i < dev->checkpointMaxBlocks; i++)
++		for (i = 0; i < dev->checkpointMaxBlocks; i++)
+ 			dev->checkpointBlockList[i] = -1;
+ 	}
+ 
+@@ -191,18 +185,17 @@ int yaffs_GetCheckpointSum(yaffs_Device 
+ 
+ static int yaffs_CheckpointFlushBuffer(yaffs_Device *dev)
+ {
+-
+ 	int chunk;
+ 	int realignedChunk;
+ 
+ 	yaffs_ExtendedTags tags;
+ 
+-	if(dev->checkpointCurrentBlock < 0){
++	if (dev->checkpointCurrentBlock < 0) {
+ 		yaffs_CheckpointFindNextErasedBlock(dev);
+ 		dev->checkpointCurrentChunk = 0;
+ 	}
+ 
+-	if(dev->checkpointCurrentBlock < 0)
++	if (dev->checkpointCurrentBlock < 0)
+ 		return 0;
+ 
+ 	tags.chunkDeleted = 0;
+@@ -210,10 +203,10 @@ static int yaffs_CheckpointFlushBuffer(y
+ 	tags.chunkId = dev->checkpointPageSequence + 1;
+ 	tags.sequenceNumber =  YAFFS_SEQUENCE_CHECKPOINT_DATA;
+ 	tags.byteCount = dev->nDataBytesPerChunk;
+-	if(dev->checkpointCurrentChunk == 0){
++	if (dev->checkpointCurrentChunk == 0) {
+ 		/* First chunk we write for the block? Set block state to
+ 		   checkpoint */
+-		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,dev->checkpointCurrentBlock);
++		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, dev->checkpointCurrentBlock);
+ 		bi->blockState = YAFFS_BLOCK_STATE_CHECKPOINT;
+ 		dev->blocksInCheckpoint++;
+ 	}
+@@ -221,28 +214,29 @@ static int yaffs_CheckpointFlushBuffer(y
+ 	chunk = dev->checkpointCurrentBlock * dev->nChunksPerBlock + dev->checkpointCurrentChunk;
+ 
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("checkpoint wite buffer nand %d(%d:%d) objid %d chId %d" TENDSTR),
+-		chunk, dev->checkpointCurrentBlock, dev->checkpointCurrentChunk,tags.objectId,tags.chunkId));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("checkpoint wite buffer nand %d(%d:%d) objid %d chId %d" TENDSTR),
++		chunk, dev->checkpointCurrentBlock, dev->checkpointCurrentChunk, tags.objectId, tags.chunkId));
+ 
+ 	realignedChunk = chunk - dev->chunkOffset;
+ 
+-	dev->writeChunkWithTagsToNAND(dev,realignedChunk,dev->checkpointBuffer,&tags);
++	dev->writeChunkWithTagsToNAND(dev, realignedChunk,
++			dev->checkpointBuffer, &tags);
+ 	dev->checkpointByteOffset = 0;
+ 	dev->checkpointPageSequence++;
+ 	dev->checkpointCurrentChunk++;
+-	if(dev->checkpointCurrentChunk >= dev->nChunksPerBlock){
++	if (dev->checkpointCurrentChunk >= dev->nChunksPerBlock) {
+ 		dev->checkpointCurrentChunk = 0;
+ 		dev->checkpointCurrentBlock = -1;
+ 	}
+-	memset(dev->checkpointBuffer,0,dev->nDataBytesPerChunk);
++	memset(dev->checkpointBuffer, 0, dev->nDataBytesPerChunk);
+ 
+ 	return 1;
+ }
+ 
+ 
+-int yaffs_CheckpointWrite(yaffs_Device *dev,const void *data, int nBytes)
++int yaffs_CheckpointWrite(yaffs_Device *dev, const void *data, int nBytes)
+ {
+-	int i=0;
++	int i = 0;
+ 	int ok = 1;
+ 
+ 
+@@ -250,17 +244,14 @@ int yaffs_CheckpointWrite(yaffs_Device *
+ 
+ 
+ 
+-	if(!dev->checkpointBuffer)
++	if (!dev->checkpointBuffer)
+ 		return 0;
+ 
+-	if(!dev->checkpointOpenForWrite)
++	if (!dev->checkpointOpenForWrite)
+ 		return -1;
+ 
+-	while(i < nBytes && ok) {
+-
+-
+-
+-		dev->checkpointBuffer[dev->checkpointByteOffset] = *dataBytes ;
++	while (i < nBytes && ok) {
++		dev->checkpointBuffer[dev->checkpointByteOffset] = *dataBytes;
+ 		dev->checkpointSum += *dataBytes;
+ 		dev->checkpointXor ^= *dataBytes;
+ 
+@@ -270,18 +261,17 @@ int yaffs_CheckpointWrite(yaffs_Device *
+ 		dev->checkpointByteCount++;
+ 
+ 
+-		if(dev->checkpointByteOffset < 0 ||
++		if (dev->checkpointByteOffset < 0 ||
+ 		   dev->checkpointByteOffset >= dev->nDataBytesPerChunk)
+ 			ok = yaffs_CheckpointFlushBuffer(dev);
+-
+ 	}
+ 
+-	return 	i;
++	return i;
+ }
+ 
+ int yaffs_CheckpointRead(yaffs_Device *dev, void *data, int nBytes)
+ {
+-	int i=0;
++	int i = 0;
+ 	int ok = 1;
+ 	yaffs_ExtendedTags tags;
+ 
+@@ -291,52 +281,54 @@ int yaffs_CheckpointRead(yaffs_Device *d
+ 
+ 	__u8 *dataBytes = (__u8 *)data;
+ 
+-	if(!dev->checkpointBuffer)
++	if (!dev->checkpointBuffer)
+ 		return 0;
+ 
+-	if(dev->checkpointOpenForWrite)
++	if (dev->checkpointOpenForWrite)
+ 		return -1;
+ 
+-	while(i < nBytes && ok) {
++	while (i < nBytes && ok) {
+ 
+ 
+-		if(dev->checkpointByteOffset < 0 ||
+-		   dev->checkpointByteOffset >= dev->nDataBytesPerChunk) {
++		if (dev->checkpointByteOffset < 0 ||
++			dev->checkpointByteOffset >= dev->nDataBytesPerChunk) {
+ 
+-		   	if(dev->checkpointCurrentBlock < 0){
++			if (dev->checkpointCurrentBlock < 0) {
+ 				yaffs_CheckpointFindNextCheckpointBlock(dev);
+ 				dev->checkpointCurrentChunk = 0;
+ 			}
+ 
+-			if(dev->checkpointCurrentBlock < 0)
++			if (dev->checkpointCurrentBlock < 0)
+ 				ok = 0;
+ 			else {
+-
+-				chunk = dev->checkpointCurrentBlock * dev->nChunksPerBlock +
+-				          dev->checkpointCurrentChunk;
++				chunk = dev->checkpointCurrentBlock *
++					dev->nChunksPerBlock +
++					dev->checkpointCurrentChunk;
+ 
+ 				realignedChunk = chunk - dev->chunkOffset;
+ 
+-	   			/* read in the next chunk */
+-	   			/* printf("read checkpoint page %d\n",dev->checkpointPage); */
+-				dev->readChunkWithTagsFromNAND(dev, realignedChunk,
+-							       dev->checkpointBuffer,
+-							      &tags);
+-
+-				if(tags.chunkId != (dev->checkpointPageSequence + 1) ||
+-				   tags.sequenceNumber != YAFFS_SEQUENCE_CHECKPOINT_DATA)
+-				   ok = 0;
++				/* read in the next chunk */
++				/* printf("read checkpoint page %d\n",dev->checkpointPage); */
++				dev->readChunkWithTagsFromNAND(dev,
++						realignedChunk,
++						dev->checkpointBuffer,
++						&tags);
++
++				if (tags.chunkId != (dev->checkpointPageSequence + 1) ||
++					tags.eccResult > YAFFS_ECC_RESULT_FIXED ||
++					tags.sequenceNumber != YAFFS_SEQUENCE_CHECKPOINT_DATA)
++					ok = 0;
+ 
+ 				dev->checkpointByteOffset = 0;
+ 				dev->checkpointPageSequence++;
+ 				dev->checkpointCurrentChunk++;
+ 
+-				if(dev->checkpointCurrentChunk >= dev->nChunksPerBlock)
++				if (dev->checkpointCurrentChunk >= dev->nChunksPerBlock)
+ 					dev->checkpointCurrentBlock = -1;
+ 			}
+ 		}
+ 
+-		if(ok){
++		if (ok) {
+ 			*dataBytes = dev->checkpointBuffer[dev->checkpointByteOffset];
+ 			dev->checkpointSum += *dataBytes;
+ 			dev->checkpointXor ^= *dataBytes;
+@@ -353,17 +345,17 @@ int yaffs_CheckpointRead(yaffs_Device *d
+ int yaffs_CheckpointClose(yaffs_Device *dev)
+ {
+ 
+-	if(dev->checkpointOpenForWrite){
+-		if(dev->checkpointByteOffset != 0)
++	if (dev->checkpointOpenForWrite) {
++		if (dev->checkpointByteOffset != 0)
+ 			yaffs_CheckpointFlushBuffer(dev);
+ 	} else {
+ 		int i;
+-		for(i = 0; i < dev->blocksInCheckpoint && dev->checkpointBlockList[i] >= 0; i++){
+-			yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,dev->checkpointBlockList[i]);
+-			if(bi->blockState == YAFFS_BLOCK_STATE_EMPTY)
++		for (i = 0; i < dev->blocksInCheckpoint && dev->checkpointBlockList[i] >= 0; i++) {
++			yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, dev->checkpointBlockList[i]);
++			if (bi->blockState == YAFFS_BLOCK_STATE_EMPTY)
+ 				bi->blockState = YAFFS_BLOCK_STATE_CHECKPOINT;
+ 			else {
+-				// Todo this looks odd...
++				/* Todo this looks odd... */
+ 			}
+ 		}
+ 		YFREE(dev->checkpointBlockList);
+@@ -374,27 +366,25 @@ int yaffs_CheckpointClose(yaffs_Device *
+ 	dev->nErasedBlocks -= dev->blocksInCheckpoint;
+ 
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("checkpoint byte count %d" TENDSTR),
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("checkpoint byte count %d" TENDSTR),
+ 			dev->checkpointByteCount));
+ 
+-	if(dev->checkpointBuffer){
++	if (dev->checkpointBuffer) {
+ 		/* free the buffer */
+ 		YFREE(dev->checkpointBuffer);
+ 		dev->checkpointBuffer = NULL;
+ 		return 1;
+-	}
+-	else
++	} else
+ 		return 0;
+-
+ }
+ 
+ int yaffs_CheckpointInvalidateStream(yaffs_Device *dev)
+ {
+ 	/* Erase the first checksum block */
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("checkpoint invalidate"TENDSTR)));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("checkpoint invalidate"TENDSTR)));
+ 
+-	if(!yaffs_CheckpointSpaceOk(dev))
++	if (!yaffs_CheckpointSpaceOk(dev))
+ 		return 0;
+ 
+ 	return yaffs_CheckpointErase(dev);
+--- a/fs/yaffs2/yaffs_checkptrw.h
++++ b/fs/yaffs2/yaffs_checkptrw.h
+@@ -20,9 +20,9 @@
+ 
+ int yaffs_CheckpointOpen(yaffs_Device *dev, int forWriting);
+ 
+-int yaffs_CheckpointWrite(yaffs_Device *dev,const void *data, int nBytes);
++int yaffs_CheckpointWrite(yaffs_Device *dev, const void *data, int nBytes);
+ 
+-int yaffs_CheckpointRead(yaffs_Device *dev,void *data, int nBytes);
++int yaffs_CheckpointRead(yaffs_Device *dev, void *data, int nBytes);
+ 
+ int yaffs_GetCheckpointSum(yaffs_Device *dev, __u32 *sum);
+ 
+--- a/fs/yaffs2/yaffs_ecc.c
++++ b/fs/yaffs2/yaffs_ecc.c
+@@ -29,7 +29,7 @@
+  */
+ 
+ const char *yaffs_ecc_c_version =
+-    "$Id: yaffs_ecc.c,v 1.9 2007-02-14 01:09:06 wookey Exp $";
++	"$Id: yaffs_ecc.c,v 1.11 2009-03-06 17:20:50 wookey Exp $";
+ 
+ #include "yportenv.h"
+ 
+@@ -109,12 +109,10 @@ void yaffs_ECCCalculate(const unsigned c
+ 		b = column_parity_table[*data++];
+ 		col_parity ^= b;
+ 
+-		if (b & 0x01)	// odd number of bits in the byte
+-		{
++		if (b & 0x01) {		/* odd number of bits in the byte */
+ 			line_parity ^= i;
+ 			line_parity_prime ^= ~i;
+ 		}
+-
+ 	}
+ 
+ 	ecc[2] = (~col_parity) | 0x03;
+@@ -158,7 +156,7 @@ void yaffs_ECCCalculate(const unsigned c
+ 	ecc[0] = ~t;
+ 
+ #ifdef CONFIG_YAFFS_ECC_WRONG_ORDER
+-	// Swap the bytes into the wrong order
++	/* Swap the bytes into the wrong order */
+ 	t = ecc[0];
+ 	ecc[0] = ecc[1];
+ 	ecc[1] = t;
+@@ -189,7 +187,7 @@ int yaffs_ECCCorrect(unsigned char *data
+ 		unsigned bit;
+ 
+ #ifdef CONFIG_YAFFS_ECC_WRONG_ORDER
+-		// swap the bytes to correct for the wrong order
++		/* swap the bytes to correct for the wrong order */
+ 		unsigned char t;
+ 
+ 		t = d0;
+@@ -251,7 +249,7 @@ int yaffs_ECCCorrect(unsigned char *data
+  * ECCxxxOther does ECC calcs on arbitrary n bytes of data
+  */
+ void yaffs_ECCCalculateOther(const unsigned char *data, unsigned nBytes,
+-			     yaffs_ECCOther * eccOther)
++				yaffs_ECCOther *eccOther)
+ {
+ 	unsigned int i;
+ 
+@@ -278,8 +276,8 @@ void yaffs_ECCCalculateOther(const unsig
+ }
+ 
+ int yaffs_ECCCorrectOther(unsigned char *data, unsigned nBytes,
+-			  yaffs_ECCOther * read_ecc,
+-			  const yaffs_ECCOther * test_ecc)
++			yaffs_ECCOther *read_ecc,
++			const yaffs_ECCOther *test_ecc)
+ {
+ 	unsigned char cDelta;	/* column parity delta */
+ 	unsigned lDelta;	/* line parity delta */
+@@ -294,8 +292,7 @@ int yaffs_ECCCorrectOther(unsigned char 
+ 		return 0; /* no error */
+ 
+ 	if (lDelta == ~lDeltaPrime &&
+-	    (((cDelta ^ (cDelta >> 1)) & 0x15) == 0x15))
+-	{
++	    (((cDelta ^ (cDelta >> 1)) & 0x15) == 0x15)) {
+ 		/* Single bit (recoverable) error in data */
+ 
+ 		bit = 0;
+@@ -307,7 +304,7 @@ int yaffs_ECCCorrectOther(unsigned char 
+ 		if (cDelta & 0x02)
+ 			bit |= 0x01;
+ 
+-		if(lDelta >= nBytes)
++		if (lDelta >= nBytes)
+ 			return -1;
+ 
+ 		data[lDelta] ^= (1 << bit);
+@@ -316,7 +313,7 @@ int yaffs_ECCCorrectOther(unsigned char 
+ 	}
+ 
+ 	if ((yaffs_CountBits32(lDelta) + yaffs_CountBits32(lDeltaPrime) +
+-	     yaffs_CountBits(cDelta)) == 1) {
++			yaffs_CountBits(cDelta)) == 1) {
+ 		/* Reccoverable error in ecc */
+ 
+ 		*read_ecc = *test_ecc;
+@@ -326,6 +323,4 @@ int yaffs_ECCCorrectOther(unsigned char 
+ 	/* Unrecoverable error */
+ 
+ 	return -1;
+-
+ }
+-
+--- a/fs/yaffs2/yaffs_ecc.h
++++ b/fs/yaffs2/yaffs_ecc.h
+@@ -13,15 +13,15 @@
+  * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+  */
+ 
+- /*
+-  * This code implements the ECC algorithm used in SmartMedia.
+-  *
+-  * The ECC comprises 22 bits of parity information and is stuffed into 3 bytes.
+-  * The two unused bit are set to 1.
+-  * The ECC can correct single bit errors in a 256-byte page of data. Thus, two such ECC
+-  * blocks are used on a 512-byte NAND page.
+-  *
+-  */
++/*
++ * This code implements the ECC algorithm used in SmartMedia.
++ *
++ * The ECC comprises 22 bits of parity information and is stuffed into 3 bytes.
++ * The two unused bit are set to 1.
++ * The ECC can correct single bit errors in a 256-byte page of data. Thus, two such ECC
++ * blocks are used on a 512-byte NAND page.
++ *
++ */
+ 
+ #ifndef __YAFFS_ECC_H__
+ #define __YAFFS_ECC_H__
+@@ -34,11 +34,11 @@ typedef struct {
+ 
+ void yaffs_ECCCalculate(const unsigned char *data, unsigned char *ecc);
+ int yaffs_ECCCorrect(unsigned char *data, unsigned char *read_ecc,
+-		     const unsigned char *test_ecc);
++		const unsigned char *test_ecc);
+ 
+ void yaffs_ECCCalculateOther(const unsigned char *data, unsigned nBytes,
+-			     yaffs_ECCOther * ecc);
++			yaffs_ECCOther *ecc);
+ int yaffs_ECCCorrectOther(unsigned char *data, unsigned nBytes,
+-			  yaffs_ECCOther * read_ecc,
+-			  const yaffs_ECCOther * test_ecc);
++			yaffs_ECCOther *read_ecc,
++			const yaffs_ECCOther *test_ecc);
+ #endif
+--- a/fs/yaffs2/yaffs_fs.c
++++ b/fs/yaffs2/yaffs_fs.c
+@@ -1,7 +1,7 @@
+ /*
+  * YAFFS: Yet Another Flash File System. A NAND-flash specific file system.
+  *
+- * Copyright (C) 2002-2007 Aleph One Ltd.
++ * Copyright (C) 2002-2009 Aleph One Ltd.
+  *   for Toby Churchill Ltd and Brightstar Engineering
+  *
+  * Created by Charles Manning <charles@aleph1.co.uk>
+@@ -32,18 +32,17 @@
+  */
+ 
+ const char *yaffs_fs_c_version =
+-    "$Id: yaffs_fs.c,v 1.63 2007-09-19 20:35:40 imcd Exp $";
++    "$Id: yaffs_fs.c,v 1.79 2009-03-17 01:12:00 wookey Exp $";
+ extern const char *yaffs_guts_c_version;
+ 
+ #include <linux/version.h>
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19))
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 19))
+ #include <linux/config.h>
+ #endif
+ #include <linux/kernel.h>
+ #include <linux/module.h>
+ #include <linux/slab.h>
+ #include <linux/init.h>
+-#include <linux/list.h>
+ #include <linux/fs.h>
+ #include <linux/proc_fs.h>
+ #include <linux/smp_lock.h>
+@@ -53,10 +52,12 @@ extern const char *yaffs_guts_c_version;
+ #include <linux/string.h>
+ #include <linux/ctype.h>
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#include "asm/div64.h"
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 
+ #include <linux/statfs.h>	/* Added NCB 15-8-2003 */
+-#include <asm/statfs.h>
++#include <linux/statfs.h>
+ #define UnlockPage(p) unlock_page(p)
+ #define Page_Uptodate(page)	test_bit(PG_uptodate, &(page)->flags)
+ 
+@@ -69,22 +70,45 @@ extern const char *yaffs_guts_c_version;
+ #define	BDEVNAME_SIZE		0
+ #define	yaffs_devname(sb, buf)	kdevname(sb->s_dev)
+ 
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 5, 0))
+ /* added NCB 26/5/2006 for 2.4.25-vrs2-tcl1 kernel */
+ #define __user
+ #endif
+ 
+ #endif
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 26))
++#define YPROC_ROOT  (&proc_root)
++#else
++#define YPROC_ROOT  NULL
++#endif
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ #define WRITE_SIZE_STR "writesize"
+-#define WRITE_SIZE(mtd) (mtd)->writesize
++#define WRITE_SIZE(mtd) ((mtd)->writesize)
+ #else
+ #define WRITE_SIZE_STR "oobblock"
+-#define WRITE_SIZE(mtd) (mtd)->oobblock
++#define WRITE_SIZE(mtd) ((mtd)->oobblock)
+ #endif
+ 
+-#include <asm/uaccess.h>
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 27))
++#define YAFFS_USE_WRITE_BEGIN_END 1
++#else
++#define YAFFS_USE_WRITE_BEGIN_END 0
++#endif
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 28))
++static uint32_t YCALCBLOCKS(uint64_t partition_size, uint32_t block_size)
++{
++	uint64_t result = partition_size;
++	do_div(result, block_size);
++	return (uint32_t)result;
++}
++#else
++#define YCALCBLOCKS(s, b) ((s)/(b))
++#endif
++
++#include <linux/uaccess.h>
+ 
+ #include "yportenv.h"
+ #include "yaffs_guts.h"
+@@ -96,28 +120,44 @@ extern const char *yaffs_guts_c_version;
+ 
+ unsigned int yaffs_traceMask = YAFFS_TRACE_BAD_BLOCKS;
+ unsigned int yaffs_wr_attempts = YAFFS_WR_ATTEMPTS;
++unsigned int yaffs_auto_checkpoint = 1;
+ 
+ /* Module Parameters */
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+-module_param(yaffs_traceMask,uint,0644);
+-module_param(yaffs_wr_attempts,uint,0644);
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
++module_param(yaffs_traceMask, uint, 0644);
++module_param(yaffs_wr_attempts, uint, 0644);
++module_param(yaffs_auto_checkpoint, uint, 0644);
++#else
++MODULE_PARM(yaffs_traceMask, "i");
++MODULE_PARM(yaffs_wr_attempts, "i");
++MODULE_PARM(yaffs_auto_checkpoint, "i");
++#endif
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 25))
++/* use iget and read_inode */
++#define Y_IGET(sb, inum) iget((sb), (inum))
++static void yaffs_read_inode(struct inode *inode);
++
+ #else
+-MODULE_PARM(yaffs_traceMask,"i");
+-MODULE_PARM(yaffs_wr_attempts,"i");
++/* Call local equivalent */
++#define YAFFS_USE_OWN_IGET
++#define Y_IGET(sb, inum) yaffs_iget((sb), (inum))
++
++static struct inode *yaffs_iget(struct super_block *sb, unsigned long ino);
+ #endif
+ 
+ /*#define T(x) printk x */
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18))
+-#define yaffs_InodeToObjectLV(iptr) (iptr)->i_private
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 18))
++#define yaffs_InodeToObjectLV(iptr) ((iptr)->i_private)
+ #else
+-#define yaffs_InodeToObjectLV(iptr) (iptr)->u.generic_ip
++#define yaffs_InodeToObjectLV(iptr) ((iptr)->u.generic_ip)
+ #endif
+ 
+ #define yaffs_InodeToObject(iptr) ((yaffs_Object *)(yaffs_InodeToObjectLV(iptr)))
+ #define yaffs_DentryToObject(dptr) yaffs_InodeToObject((dptr)->d_inode)
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ #define yaffs_SuperToDevice(sb)	((yaffs_Device *)sb->s_fs_info)
+ #else
+ #define yaffs_SuperToDevice(sb)	((yaffs_Device *)sb->u.generic_sbp)
+@@ -126,47 +166,49 @@ MODULE_PARM(yaffs_wr_attempts,"i");
+ static void yaffs_put_super(struct super_block *sb);
+ 
+ static ssize_t yaffs_file_write(struct file *f, const char *buf, size_t n,
+-				loff_t * pos);
++				loff_t *pos);
++static ssize_t yaffs_hold_space(struct file *f);
++static void yaffs_release_space(struct file *f);
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_file_flush(struct file *file, fl_owner_t id);
+ #else
+ static int yaffs_file_flush(struct file *file);
+ #endif
+ 
+ static int yaffs_sync_object(struct file *file, struct dentry *dentry,
+-			     int datasync);
++				int datasync);
+ 
+ static int yaffs_readdir(struct file *f, void *dirent, filldir_t filldir);
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode,
+ 			struct nameidata *n);
+ static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry,
+-				   struct nameidata *n);
++					struct nameidata *n);
+ #else
+ static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode);
+ static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry);
+ #endif
+ static int yaffs_link(struct dentry *old_dentry, struct inode *dir,
+-		      struct dentry *dentry);
++			struct dentry *dentry);
+ static int yaffs_unlink(struct inode *dir, struct dentry *dentry);
+ static int yaffs_symlink(struct inode *dir, struct dentry *dentry,
+-			 const char *symname);
++			const char *symname);
+ static int yaffs_mkdir(struct inode *dir, struct dentry *dentry, int mode);
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode,
+-		       dev_t dev);
++			dev_t dev);
+ #else
+ static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode,
+-		       int dev);
++			int dev);
+ #endif
+ static int yaffs_rename(struct inode *old_dir, struct dentry *old_dentry,
+ 			struct inode *new_dir, struct dentry *new_dentry);
+ static int yaffs_setattr(struct dentry *dentry, struct iattr *attr);
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_sync_fs(struct super_block *sb, int wait);
+ static void yaffs_write_super(struct super_block *sb);
+ #else
+@@ -174,33 +216,47 @@ static int yaffs_sync_fs(struct super_bl
+ static int yaffs_write_super(struct super_block *sb);
+ #endif
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_statfs(struct dentry *dentry, struct kstatfs *buf);
+-#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_statfs(struct super_block *sb, struct kstatfs *buf);
+ #else
+ static int yaffs_statfs(struct super_block *sb, struct statfs *buf);
+ #endif
+-static void yaffs_read_inode(struct inode *inode);
+ 
++#ifdef YAFFS_HAS_PUT_INODE
+ static void yaffs_put_inode(struct inode *inode);
++#endif
++
+ static void yaffs_delete_inode(struct inode *);
+ static void yaffs_clear_inode(struct inode *);
+ 
+ static int yaffs_readpage(struct file *file, struct page *page);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_writepage(struct page *page, struct writeback_control *wbc);
+ #else
+ static int yaffs_writepage(struct page *page);
+ #endif
++
++
++#if (YAFFS_USE_WRITE_BEGIN_END != 0)
++static int yaffs_write_begin(struct file *filp, struct address_space *mapping,
++				loff_t pos, unsigned len, unsigned flags,
++				struct page **pagep, void **fsdata);
++static int yaffs_write_end(struct file *filp, struct address_space *mapping,
++				loff_t pos, unsigned len, unsigned copied,
++				struct page *pg, void *fsdadata);
++#else
+ static int yaffs_prepare_write(struct file *f, struct page *pg,
+-			       unsigned offset, unsigned to);
++				unsigned offset, unsigned to);
+ static int yaffs_commit_write(struct file *f, struct page *pg, unsigned offset,
+-			      unsigned to);
++				unsigned to);
+ 
+-static int yaffs_readlink(struct dentry *dentry, char __user * buffer,
+-			  int buflen);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
++#endif
++
++static int yaffs_readlink(struct dentry *dentry, char __user *buffer,
++				int buflen);
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 13))
+ static void *yaffs_follow_link(struct dentry *dentry, struct nameidata *nd);
+ #else
+ static int yaffs_follow_link(struct dentry *dentry, struct nameidata *nd);
+@@ -209,12 +265,17 @@ static int yaffs_follow_link(struct dent
+ static struct address_space_operations yaffs_file_address_operations = {
+ 	.readpage = yaffs_readpage,
+ 	.writepage = yaffs_writepage,
++#if (YAFFS_USE_WRITE_BEGIN_END > 0)
++	.write_begin = yaffs_write_begin,
++	.write_end = yaffs_write_end,
++#else
+ 	.prepare_write = yaffs_prepare_write,
+ 	.commit_write = yaffs_commit_write,
++#endif
+ };
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,22))
+-static struct file_operations yaffs_file_operations = {
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 22))
++static const struct file_operations yaffs_file_operations = {
+ 	.read = do_sync_read,
+ 	.write = do_sync_write,
+ 	.aio_read = generic_file_aio_read,
+@@ -224,11 +285,12 @@ static struct file_operations yaffs_file
+ 	.fsync = yaffs_sync_object,
+ 	.splice_read = generic_file_splice_read,
+ 	.splice_write = generic_file_splice_write,
++	.llseek = generic_file_llseek,
+ };
+ 
+-#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18))
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 18))
+ 
+-static struct file_operations yaffs_file_operations = {
++static const struct file_operations yaffs_file_operations = {
+ 	.read = do_sync_read,
+ 	.write = do_sync_write,
+ 	.aio_read = generic_file_aio_read,
+@@ -241,29 +303,29 @@ static struct file_operations yaffs_file
+ 
+ #else
+ 
+-static struct file_operations yaffs_file_operations = {
++static const struct file_operations yaffs_file_operations = {
+ 	.read = generic_file_read,
+ 	.write = generic_file_write,
+ 	.mmap = generic_file_mmap,
+ 	.flush = yaffs_file_flush,
+ 	.fsync = yaffs_sync_object,
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 	.sendfile = generic_file_sendfile,
+ #endif
+ };
+ #endif
+ 
+-static struct inode_operations yaffs_file_inode_operations = {
++static const struct inode_operations yaffs_file_inode_operations = {
+ 	.setattr = yaffs_setattr,
+ };
+ 
+-static struct inode_operations yaffs_symlink_inode_operations = {
++static const struct inode_operations yaffs_symlink_inode_operations = {
+ 	.readlink = yaffs_readlink,
+ 	.follow_link = yaffs_follow_link,
+ 	.setattr = yaffs_setattr,
+ };
+ 
+-static struct inode_operations yaffs_dir_inode_operations = {
++static const struct inode_operations yaffs_dir_inode_operations = {
+ 	.create = yaffs_create,
+ 	.lookup = yaffs_lookup,
+ 	.link = yaffs_link,
+@@ -276,16 +338,21 @@ static struct inode_operations yaffs_dir
+ 	.setattr = yaffs_setattr,
+ };
+ 
+-static struct file_operations yaffs_dir_operations = {
++static const struct file_operations yaffs_dir_operations = {
+ 	.read = generic_read_dir,
+ 	.readdir = yaffs_readdir,
+ 	.fsync = yaffs_sync_object,
+ };
+ 
+-static struct super_operations yaffs_super_ops = {
++static const struct super_operations yaffs_super_ops = {
+ 	.statfs = yaffs_statfs,
++
++#ifndef YAFFS_USE_OWN_IGET
+ 	.read_inode = yaffs_read_inode,
++#endif
++#ifdef YAFFS_HAS_PUT_INODE
+ 	.put_inode = yaffs_put_inode,
++#endif
+ 	.put_super = yaffs_put_super,
+ 	.delete_inode = yaffs_delete_inode,
+ 	.clear_inode = yaffs_clear_inode,
+@@ -293,22 +360,21 @@ static struct super_operations yaffs_sup
+ 	.write_super = yaffs_write_super,
+ };
+ 
+-static void yaffs_GrossLock(yaffs_Device * dev)
++static void yaffs_GrossLock(yaffs_Device *dev)
+ {
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs locking\n"));
+-
++	T(YAFFS_TRACE_OS, ("yaffs locking %p\n", current));
+ 	down(&dev->grossLock);
++	T(YAFFS_TRACE_OS, ("yaffs locked %p\n", current));
+ }
+ 
+-static void yaffs_GrossUnlock(yaffs_Device * dev)
++static void yaffs_GrossUnlock(yaffs_Device *dev)
+ {
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs unlocking\n"));
++	T(YAFFS_TRACE_OS, ("yaffs unlocking %p\n", current));
+ 	up(&dev->grossLock);
+-
+ }
+ 
+-static int yaffs_readlink(struct dentry *dentry, char __user * buffer,
+-			  int buflen)
++static int yaffs_readlink(struct dentry *dentry, char __user *buffer,
++			int buflen)
+ {
+ 	unsigned char *alias;
+ 	int ret;
+@@ -329,7 +395,7 @@ static int yaffs_readlink(struct dentry 
+ 	return ret;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 13))
+ static void *yaffs_follow_link(struct dentry *dentry, struct nameidata *nd)
+ #else
+ static int yaffs_follow_link(struct dentry *dentry, struct nameidata *nd)
+@@ -345,32 +411,31 @@ static int yaffs_follow_link(struct dent
+ 
+ 	yaffs_GrossUnlock(dev);
+ 
+-	if (!alias)
+-        {
++	if (!alias) {
+ 		ret = -ENOMEM;
+ 		goto out;
+-        }
++	}
+ 
+ 	ret = vfs_follow_link(nd, alias);
+ 	kfree(alias);
+ out:
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
+-	return ERR_PTR (ret);
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 13))
++	return ERR_PTR(ret);
+ #else
+ 	return ret;
+ #endif
+ }
+ 
+ struct inode *yaffs_get_inode(struct super_block *sb, int mode, int dev,
+-			      yaffs_Object * obj);
++				yaffs_Object *obj);
+ 
+ /*
+  * Lookup is used to find objects in the fs
+  */
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 
+ static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry,
+-				   struct nameidata *n)
++				struct nameidata *n)
+ #else
+ static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry)
+ #endif
+@@ -383,12 +448,11 @@ static struct dentry *yaffs_lookup(struc
+ 	yaffs_GrossLock(dev);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_lookup for %d:%s\n",
+-	   yaffs_InodeToObject(dir)->objectId, dentry->d_name.name));
++		("yaffs_lookup for %d:%s\n",
++		yaffs_InodeToObject(dir)->objectId, dentry->d_name.name));
+ 
+-	obj =
+-	    yaffs_FindObjectByName(yaffs_InodeToObject(dir),
+-				   dentry->d_name.name);
++	obj = yaffs_FindObjectByName(yaffs_InodeToObject(dir),
++					dentry->d_name.name);
+ 
+ 	obj = yaffs_GetEquivalentObject(obj);	/* in case it was a hardlink */
+ 
+@@ -397,13 +461,13 @@ static struct dentry *yaffs_lookup(struc
+ 
+ 	if (obj) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_lookup found %d\n", obj->objectId));
++			("yaffs_lookup found %d\n", obj->objectId));
+ 
+ 		inode = yaffs_get_inode(dir->i_sb, obj->yst_mode, 0, obj);
+ 
+ 		if (inode) {
+ 			T(YAFFS_TRACE_OS,
+-			  (KERN_DEBUG "yaffs_loookup dentry \n"));
++				("yaffs_loookup dentry \n"));
+ /* #if 0 asserted by NCB for 2.5/6 compatability - falls through to
+  * d_add even if NULL inode */
+ #if 0
+@@ -416,7 +480,7 @@ static struct dentry *yaffs_lookup(struc
+ 		}
+ 
+ 	} else {
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_lookup not found\n"));
++		T(YAFFS_TRACE_OS, ("yaffs_lookup not found\n"));
+ 
+ 	}
+ 
+@@ -425,20 +489,22 @@ static struct dentry *yaffs_lookup(struc
+ 	d_add(dentry, inode);
+ 
+ 	return NULL;
+-	/*      return (ERR_PTR(-EIO)); */
+-
+ }
+ 
++
++#ifdef YAFFS_HAS_PUT_INODE
++
+ /* For now put inode is just for debugging
+  * Put inode is called when the inode **structure** is put.
+  */
+ static void yaffs_put_inode(struct inode *inode)
+ {
+ 	T(YAFFS_TRACE_OS,
+-	  ("yaffs_put_inode: ino %d, count %d\n", (int)inode->i_ino,
+-	   atomic_read(&inode->i_count)));
++		("yaffs_put_inode: ino %d, count %d\n", (int)inode->i_ino,
++		atomic_read(&inode->i_count)));
+ 
+ }
++#endif
+ 
+ /* clear is called to tell the fs to release any per-inode data it holds */
+ static void yaffs_clear_inode(struct inode *inode)
+@@ -449,9 +515,9 @@ static void yaffs_clear_inode(struct ino
+ 	obj = yaffs_InodeToObject(inode);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  ("yaffs_clear_inode: ino %d, count %d %s\n", (int)inode->i_ino,
+-	   atomic_read(&inode->i_count),
+-	   obj ? "object exists" : "null object"));
++		("yaffs_clear_inode: ino %d, count %d %s\n", (int)inode->i_ino,
++		atomic_read(&inode->i_count),
++		obj ? "object exists" : "null object"));
+ 
+ 	if (obj) {
+ 		dev = obj->myDev;
+@@ -486,23 +552,23 @@ static void yaffs_delete_inode(struct in
+ 	yaffs_Device *dev;
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  ("yaffs_delete_inode: ino %d, count %d %s\n", (int)inode->i_ino,
+-	   atomic_read(&inode->i_count),
+-	   obj ? "object exists" : "null object"));
++		("yaffs_delete_inode: ino %d, count %d %s\n", (int)inode->i_ino,
++		atomic_read(&inode->i_count),
++		obj ? "object exists" : "null object"));
+ 
+ 	if (obj) {
+ 		dev = obj->myDev;
+ 		yaffs_GrossLock(dev);
+-		yaffs_DeleteFile(obj);
++		yaffs_DeleteObject(obj);
+ 		yaffs_GrossUnlock(dev);
+ 	}
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
+-        truncate_inode_pages (&inode->i_data, 0);
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 13))
++	truncate_inode_pages(&inode->i_data, 0);
+ #endif
+ 	clear_inode(inode);
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_file_flush(struct file *file, fl_owner_t id)
+ #else
+ static int yaffs_file_flush(struct file *file)
+@@ -513,8 +579,8 @@ static int yaffs_file_flush(struct file 
+ 	yaffs_Device *dev = obj->myDev;
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_file_flush object %d (%s)\n", obj->objectId,
+-	   obj->dirty ? "dirty" : "clean"));
++		("yaffs_file_flush object %d (%s)\n", obj->objectId,
++		obj->dirty ? "dirty" : "clean"));
+ 
+ 	yaffs_GrossLock(dev);
+ 
+@@ -535,15 +601,15 @@ static int yaffs_readpage_nolock(struct 
+ 
+ 	yaffs_Device *dev;
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_readpage at %08x, size %08x\n",
+-			   (unsigned)(pg->index << PAGE_CACHE_SHIFT),
+-			   (unsigned)PAGE_CACHE_SIZE));
++	T(YAFFS_TRACE_OS, ("yaffs_readpage at %08x, size %08x\n",
++			(unsigned)(pg->index << PAGE_CACHE_SHIFT),
++			(unsigned)PAGE_CACHE_SIZE));
+ 
+ 	obj = yaffs_DentryToObject(f->f_dentry);
+ 
+ 	dev = obj->myDev;
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 	BUG_ON(!PageLocked(pg));
+ #else
+ 	if (!PageLocked(pg))
+@@ -555,9 +621,9 @@ static int yaffs_readpage_nolock(struct 
+ 
+ 	yaffs_GrossLock(dev);
+ 
+-	ret =
+-	    yaffs_ReadDataFromFile(obj, pg_buf, pg->index << PAGE_CACHE_SHIFT,
+-				   PAGE_CACHE_SIZE);
++	ret = yaffs_ReadDataFromFile(obj, pg_buf,
++				pg->index << PAGE_CACHE_SHIFT,
++				PAGE_CACHE_SIZE);
+ 
+ 	yaffs_GrossUnlock(dev);
+ 
+@@ -575,7 +641,7 @@ static int yaffs_readpage_nolock(struct 
+ 	flush_dcache_page(pg);
+ 	kunmap(pg);
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_readpage done\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_readpage done\n"));
+ 	return ret;
+ }
+ 
+@@ -593,7 +659,7 @@ static int yaffs_readpage(struct file *f
+ 
+ /* writepage inspired by/stolen from smbfs */
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_writepage(struct page *page, struct writeback_control *wbc)
+ #else
+ static int yaffs_writepage(struct page *page)
+@@ -616,12 +682,11 @@ static int yaffs_writepage(struct page *
+ 
+ 	if (offset > inode->i_size) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG
+-		   "yaffs_writepage at %08x, inode size = %08x!!!\n",
+-		   (unsigned)(page->index << PAGE_CACHE_SHIFT),
+-		   (unsigned)inode->i_size));
++			("yaffs_writepage at %08x, inode size = %08x!!!\n",
++			(unsigned)(page->index << PAGE_CACHE_SHIFT),
++			(unsigned)inode->i_size));
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "                -> don't care!!\n"));
++			("                -> don't care!!\n"));
+ 		unlock_page(page);
+ 		return 0;
+ 	}
+@@ -629,11 +694,10 @@ static int yaffs_writepage(struct page *
+ 	end_index = inode->i_size >> PAGE_CACHE_SHIFT;
+ 
+ 	/* easy case */
+-	if (page->index < end_index) {
++	if (page->index < end_index)
+ 		nBytes = PAGE_CACHE_SIZE;
+-	} else {
++	else
+ 		nBytes = inode->i_size & (PAGE_CACHE_SIZE - 1);
+-	}
+ 
+ 	get_page(page);
+ 
+@@ -643,19 +707,18 @@ static int yaffs_writepage(struct page *
+ 	yaffs_GrossLock(obj->myDev);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_writepage at %08x, size %08x\n",
+-	   (unsigned)(page->index << PAGE_CACHE_SHIFT), nBytes));
++		("yaffs_writepage at %08x, size %08x\n",
++		(unsigned)(page->index << PAGE_CACHE_SHIFT), nBytes));
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "writepag0: obj = %05x, ino = %05x\n",
+-	   (int)obj->variant.fileVariant.fileSize, (int)inode->i_size));
++		("writepag0: obj = %05x, ino = %05x\n",
++		(int)obj->variant.fileVariant.fileSize, (int)inode->i_size));
+ 
+-	nWritten =
+-	    yaffs_WriteDataToFile(obj, buffer, page->index << PAGE_CACHE_SHIFT,
+-				  nBytes, 0);
++	nWritten = yaffs_WriteDataToFile(obj, buffer,
++			page->index << PAGE_CACHE_SHIFT, nBytes, 0);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "writepag1: obj = %05x, ino = %05x\n",
+-	   (int)obj->variant.fileVariant.fileSize, (int)inode->i_size));
++		("writepag1: obj = %05x, ino = %05x\n",
++		(int)obj->variant.fileVariant.fileSize, (int)inode->i_size));
+ 
+ 	yaffs_GrossUnlock(obj->myDev);
+ 
+@@ -667,100 +730,207 @@ static int yaffs_writepage(struct page *
+ 	return (nWritten == nBytes) ? 0 : -ENOSPC;
+ }
+ 
++
++#if (YAFFS_USE_WRITE_BEGIN_END > 0)
++static int yaffs_write_begin(struct file *filp, struct address_space *mapping,
++				loff_t pos, unsigned len, unsigned flags,
++				struct page **pagep, void **fsdata)
++{
++	struct page *pg = NULL;
++	pgoff_t index = pos >> PAGE_CACHE_SHIFT;
++	uint32_t offset = pos & (PAGE_CACHE_SIZE - 1);
++	uint32_t to = offset + len;
++
++	int ret = 0;
++	int space_held = 0;
++
++	T(YAFFS_TRACE_OS, ("start yaffs_write_begin\n"));
++	/* Get a page */
++#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 28)
++	pg = grab_cache_page_write_begin(mapping, index, flags);
++#else
++	pg = __grab_cache_page(mapping, index);
++#endif
++
++	*pagep = pg;
++	if (!pg) {
++		ret =  -ENOMEM;
++		goto out;
++	}
++	/* Get fs space */
++	space_held = yaffs_hold_space(filp);
++
++	if (!space_held) {
++		ret = -ENOSPC;
++		goto out;
++	}
++
++	/* Update page if required */
++
++	if (!Page_Uptodate(pg) && (offset || to < PAGE_CACHE_SIZE))
++		ret = yaffs_readpage_nolock(filp, pg);
++
++	if (ret)
++		goto out;
++
++	/* Happy path return */
++	T(YAFFS_TRACE_OS, ("end yaffs_write_begin - ok\n"));
++
++	return 0;
++
++out:
++	T(YAFFS_TRACE_OS, ("end yaffs_write_begin fail returning %d\n", ret));
++	if (space_held)
++		yaffs_release_space(filp);
++	if (pg) {
++		unlock_page(pg);
++		page_cache_release(pg);
++	}
++	return ret;
++}
++
++#else
++
+ static int yaffs_prepare_write(struct file *f, struct page *pg,
+-			       unsigned offset, unsigned to)
++				unsigned offset, unsigned to)
+ {
++	T(YAFFS_TRACE_OS, ("yaffs_prepair_write\n"));
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_prepair_write\n"));
+ 	if (!Page_Uptodate(pg) && (offset || to < PAGE_CACHE_SIZE))
+ 		return yaffs_readpage_nolock(f, pg);
+-
+ 	return 0;
++}
++#endif
++
++#if (YAFFS_USE_WRITE_BEGIN_END > 0)
++static int yaffs_write_end(struct file *filp, struct address_space *mapping,
++				loff_t pos, unsigned len, unsigned copied,
++				struct page *pg, void *fsdadata)
++{
++	int ret = 0;
++	void *addr, *kva;
++	uint32_t offset_into_page = pos & (PAGE_CACHE_SIZE - 1);
++
++	kva = kmap(pg);
++	addr = kva + offset_into_page;
++
++	T(YAFFS_TRACE_OS,
++		("yaffs_write_end addr %x pos %x nBytes %d\n",
++		(unsigned) addr,
++		(int)pos, copied));
++
++	ret = yaffs_file_write(filp, addr, copied, &pos);
++
++	if (ret != copied) {
++		T(YAFFS_TRACE_OS,
++			("yaffs_write_end not same size ret %d  copied %d\n",
++			ret, copied));
++		SetPageError(pg);
++		ClearPageUptodate(pg);
++	} else {
++		SetPageUptodate(pg);
++	}
++
++	kunmap(pg);
+ 
++	yaffs_release_space(filp);
++	unlock_page(pg);
++	page_cache_release(pg);
++	return ret;
+ }
++#else
+ 
+ static int yaffs_commit_write(struct file *f, struct page *pg, unsigned offset,
+-			      unsigned to)
++				unsigned to)
+ {
++	void *addr, *kva;
+ 
+-	void *addr = page_address(pg) + offset;
+ 	loff_t pos = (((loff_t) pg->index) << PAGE_CACHE_SHIFT) + offset;
+ 	int nBytes = to - offset;
+ 	int nWritten;
+ 
+ 	unsigned spos = pos;
+-	unsigned saddr = (unsigned)addr;
++	unsigned saddr;
++
++	kva = kmap(pg);
++	addr = kva + offset;
++
++	saddr = (unsigned) addr;
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_commit_write addr %x pos %x nBytes %d\n", saddr,
+-	   spos, nBytes));
++		("yaffs_commit_write addr %x pos %x nBytes %d\n",
++		saddr, spos, nBytes));
+ 
+ 	nWritten = yaffs_file_write(f, addr, nBytes, &pos);
+ 
+ 	if (nWritten != nBytes) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG
+-		   "yaffs_commit_write not same size nWritten %d  nBytes %d\n",
+-		   nWritten, nBytes));
++			("yaffs_commit_write not same size nWritten %d  nBytes %d\n",
++			nWritten, nBytes));
+ 		SetPageError(pg);
+ 		ClearPageUptodate(pg);
+ 	} else {
+ 		SetPageUptodate(pg);
+ 	}
+ 
++	kunmap(pg);
++
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_commit_write returning %d\n",
+-	   nWritten == nBytes ? 0 : nWritten));
++		("yaffs_commit_write returning %d\n",
++		nWritten == nBytes ? 0 : nWritten));
+ 
+ 	return nWritten == nBytes ? 0 : nWritten;
+-
+ }
++#endif
++
+ 
+-static void yaffs_FillInodeFromObject(struct inode *inode, yaffs_Object * obj)
++static void yaffs_FillInodeFromObject(struct inode *inode, yaffs_Object *obj)
+ {
+ 	if (inode && obj) {
+ 
+ 
+ 		/* Check mode against the variant type and attempt to repair if broken. */
+- 		__u32 mode = obj->yst_mode;
+- 		switch( obj->variantType ){
+- 		case YAFFS_OBJECT_TYPE_FILE :
+- 		        if( ! S_ISREG(mode) ){
+- 			        obj->yst_mode &= ~S_IFMT;
+- 			        obj->yst_mode |= S_IFREG;
+- 			}
+-
+- 			break;
+- 		case YAFFS_OBJECT_TYPE_SYMLINK :
+- 		        if( ! S_ISLNK(mode) ){
+- 			        obj->yst_mode &= ~S_IFMT;
+- 				obj->yst_mode |= S_IFLNK;
+- 			}
+-
+- 			break;
+- 		case YAFFS_OBJECT_TYPE_DIRECTORY :
+- 		        if( ! S_ISDIR(mode) ){
+- 			        obj->yst_mode &= ~S_IFMT;
+- 			        obj->yst_mode |= S_IFDIR;
+- 			}
+-
+- 			break;
+- 		case YAFFS_OBJECT_TYPE_UNKNOWN :
+- 		case YAFFS_OBJECT_TYPE_HARDLINK :
+- 		case YAFFS_OBJECT_TYPE_SPECIAL :
+- 		default:
+- 		        /* TODO? */
+- 		        break;
+- 		}
++		__u32 mode = obj->yst_mode;
++		switch (obj->variantType) {
++		case YAFFS_OBJECT_TYPE_FILE:
++			if (!S_ISREG(mode)) {
++				obj->yst_mode &= ~S_IFMT;
++				obj->yst_mode |= S_IFREG;
++			}
++
++			break;
++		case YAFFS_OBJECT_TYPE_SYMLINK:
++			if (!S_ISLNK(mode)) {
++				obj->yst_mode &= ~S_IFMT;
++				obj->yst_mode |= S_IFLNK;
++			}
++
++			break;
++		case YAFFS_OBJECT_TYPE_DIRECTORY:
++			if (!S_ISDIR(mode)) {
++				obj->yst_mode &= ~S_IFMT;
++				obj->yst_mode |= S_IFDIR;
++			}
++
++			break;
++		case YAFFS_OBJECT_TYPE_UNKNOWN:
++		case YAFFS_OBJECT_TYPE_HARDLINK:
++		case YAFFS_OBJECT_TYPE_SPECIAL:
++		default:
++			/* TODO? */
++			break;
++		}
++
++		inode->i_flags |= S_NOATIME;
+ 
+ 		inode->i_ino = obj->objectId;
+ 		inode->i_mode = obj->yst_mode;
+ 		inode->i_uid = obj->yst_uid;
+ 		inode->i_gid = obj->yst_gid;
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19))
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 19))
+ 		inode->i_blksize = inode->i_sb->s_blocksize;
+ #endif
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 
+ 		inode->i_rdev = old_decode_dev(obj->yst_rdev);
+ 		inode->i_atime.tv_sec = (time_t) (obj->yst_atime);
+@@ -781,26 +951,25 @@ static void yaffs_FillInodeFromObject(st
+ 		inode->i_nlink = yaffs_GetObjectLinkCount(obj);
+ 
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG
+-		   "yaffs_FillInode mode %x uid %d gid %d size %d count %d\n",
+-		   inode->i_mode, inode->i_uid, inode->i_gid,
+-		   (int)inode->i_size, atomic_read(&inode->i_count)));
++			("yaffs_FillInode mode %x uid %d gid %d size %d count %d\n",
++			inode->i_mode, inode->i_uid, inode->i_gid,
++			(int)inode->i_size, atomic_read(&inode->i_count)));
+ 
+ 		switch (obj->yst_mode & S_IFMT) {
+ 		default:	/* fifo, device or socket */
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 			init_special_inode(inode, obj->yst_mode,
+-					   old_decode_dev(obj->yst_rdev));
++					old_decode_dev(obj->yst_rdev));
+ #else
+ 			init_special_inode(inode, obj->yst_mode,
+-					   (dev_t) (obj->yst_rdev));
++					(dev_t) (obj->yst_rdev));
+ #endif
+ 			break;
+ 		case S_IFREG:	/* file */
+ 			inode->i_op = &yaffs_file_inode_operations;
+ 			inode->i_fop = &yaffs_file_operations;
+ 			inode->i_mapping->a_ops =
+-			    &yaffs_file_address_operations;
++				&yaffs_file_address_operations;
+ 			break;
+ 		case S_IFDIR:	/* directory */
+ 			inode->i_op = &yaffs_dir_inode_operations;
+@@ -817,34 +986,36 @@ static void yaffs_FillInodeFromObject(st
+ 
+ 	} else {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_FileInode invalid parameters\n"));
++			("yaffs_FileInode invalid parameters\n"));
+ 	}
+ 
+ }
+ 
+ struct inode *yaffs_get_inode(struct super_block *sb, int mode, int dev,
+-			      yaffs_Object * obj)
++				yaffs_Object *obj)
+ {
+ 	struct inode *inode;
+ 
+ 	if (!sb) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_get_inode for NULL super_block!!\n"));
++			("yaffs_get_inode for NULL super_block!!\n"));
+ 		return NULL;
+ 
+ 	}
+ 
+ 	if (!obj) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_get_inode for NULL object!!\n"));
++			("yaffs_get_inode for NULL object!!\n"));
+ 		return NULL;
+ 
+ 	}
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_get_inode for object %d\n", obj->objectId));
++		("yaffs_get_inode for object %d\n", obj->objectId));
+ 
+-	inode = iget(sb, obj->objectId);
++	inode = Y_IGET(sb, obj->objectId);
++	if (IS_ERR(inode))
++		return NULL;
+ 
+ 	/* NB Side effect: iget calls back to yaffs_read_inode(). */
+ 	/* iget also increments the inode's i_count */
+@@ -854,7 +1025,7 @@ struct inode *yaffs_get_inode(struct sup
+ }
+ 
+ static ssize_t yaffs_file_write(struct file *f, const char *buf, size_t n,
+-				loff_t * pos)
++				loff_t *pos)
+ {
+ 	yaffs_Object *obj;
+ 	int nWritten, ipos;
+@@ -869,28 +1040,26 @@ static ssize_t yaffs_file_write(struct f
+ 
+ 	inode = f->f_dentry->d_inode;
+ 
+-	if (!S_ISBLK(inode->i_mode) && f->f_flags & O_APPEND) {
++	if (!S_ISBLK(inode->i_mode) && f->f_flags & O_APPEND)
+ 		ipos = inode->i_size;
+-	} else {
++	else
+ 		ipos = *pos;
+-	}
+ 
+-	if (!obj) {
++	if (!obj)
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_file_write: hey obj is null!\n"));
+-	} else {
++			("yaffs_file_write: hey obj is null!\n"));
++	else
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG
+-		   "yaffs_file_write about to write writing %d bytes"
+-		   "to object %d at %d\n",
+-		   n, obj->objectId, ipos));
+-	}
++			("yaffs_file_write about to write writing %zu bytes"
++			"to object %d at %d\n",
++			n, obj->objectId, ipos));
+ 
+ 	nWritten = yaffs_WriteDataToFile(obj, buf, ipos, n, 0);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_file_write writing %d bytes, %d written at %d\n",
+-	   n, nWritten, ipos));
++		("yaffs_file_write writing %zu bytes, %d written at %d\n",
++		n, nWritten, ipos));
++
+ 	if (nWritten > 0) {
+ 		ipos += nWritten;
+ 		*pos = ipos;
+@@ -899,10 +1068,9 @@ static ssize_t yaffs_file_write(struct f
+ 			inode->i_blocks = (ipos + 511) >> 9;
+ 
+ 			T(YAFFS_TRACE_OS,
+-			  (KERN_DEBUG
+-			   "yaffs_file_write size updated to %d bytes, "
+-			   "%d blocks\n",
+-			   ipos, (int)(inode->i_blocks)));
++				("yaffs_file_write size updated to %d bytes, "
++				"%d blocks\n",
++				ipos, (int)(inode->i_blocks)));
+ 		}
+ 
+ 	}
+@@ -910,13 +1078,54 @@ static ssize_t yaffs_file_write(struct f
+ 	return nWritten == 0 ? -ENOSPC : nWritten;
+ }
+ 
++/* Space holding and freeing is done to ensure we have space available for write_begin/end */
++/* For now we just assume few parallel writes and check against a small number. */
++/* Todo: need to do this with a counter to handle parallel reads better */
++
++static ssize_t yaffs_hold_space(struct file *f)
++{
++	yaffs_Object *obj;
++	yaffs_Device *dev;
++
++	int nFreeChunks;
++
++
++	obj = yaffs_DentryToObject(f->f_dentry);
++
++	dev = obj->myDev;
++
++	yaffs_GrossLock(dev);
++
++	nFreeChunks = yaffs_GetNumberOfFreeChunks(dev);
++
++	yaffs_GrossUnlock(dev);
++
++	return (nFreeChunks > 20) ? 1 : 0;
++}
++
++static void yaffs_release_space(struct file *f)
++{
++	yaffs_Object *obj;
++	yaffs_Device *dev;
++
++
++	obj = yaffs_DentryToObject(f->f_dentry);
++
++	dev = obj->myDev;
++
++	yaffs_GrossLock(dev);
++
++
++	yaffs_GrossUnlock(dev);
++}
++
+ static int yaffs_readdir(struct file *f, void *dirent, filldir_t filldir)
+ {
+ 	yaffs_Object *obj;
+ 	yaffs_Device *dev;
+ 	struct inode *inode = f->f_dentry->d_inode;
+ 	unsigned long offset, curoffs;
+-	struct list_head *i;
++	struct ylist_head *i;
+ 	yaffs_Object *l;
+ 
+ 	char name[YAFFS_MAX_NAME_LENGTH + 1];
+@@ -932,24 +1141,20 @@ static int yaffs_readdir(struct file *f,
+ 
+ 	if (offset == 0) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_readdir: entry . ino %d \n",
+-		   (int)inode->i_ino));
+-		if (filldir(dirent, ".", 1, offset, inode->i_ino, DT_DIR)
+-		    < 0) {
++			("yaffs_readdir: entry . ino %d \n",
++			(int)inode->i_ino));
++		if (filldir(dirent, ".", 1, offset, inode->i_ino, DT_DIR) < 0)
+ 			goto out;
+-		}
+ 		offset++;
+ 		f->f_pos++;
+ 	}
+ 	if (offset == 1) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_readdir: entry .. ino %d \n",
+-		   (int)f->f_dentry->d_parent->d_inode->i_ino));
+-		if (filldir
+-		    (dirent, "..", 2, offset,
+-		     f->f_dentry->d_parent->d_inode->i_ino, DT_DIR) < 0) {
++			("yaffs_readdir: entry .. ino %d \n",
++			(int)f->f_dentry->d_parent->d_inode->i_ino));
++		if (filldir(dirent, "..", 2, offset,
++			f->f_dentry->d_parent->d_inode->i_ino, DT_DIR) < 0)
+ 			goto out;
+-		}
+ 		offset++;
+ 		f->f_pos++;
+ 	}
+@@ -965,35 +1170,32 @@ static int yaffs_readdir(struct file *f,
+ 		f->f_version = inode->i_version;
+ 	}
+ 
+-	list_for_each(i, &obj->variant.directoryVariant.children) {
++	ylist_for_each(i, &obj->variant.directoryVariant.children) {
+ 		curoffs++;
+ 		if (curoffs >= offset) {
+-			l = list_entry(i, yaffs_Object, siblings);
++			l = ylist_entry(i, yaffs_Object, siblings);
+ 
+ 			yaffs_GetObjectName(l, name,
+ 					    YAFFS_MAX_NAME_LENGTH + 1);
+ 			T(YAFFS_TRACE_OS,
+-			  (KERN_DEBUG "yaffs_readdir: %s inode %d\n", name,
++			  ("yaffs_readdir: %s inode %d\n", name,
+ 			   yaffs_GetObjectInode(l)));
+ 
+ 			if (filldir(dirent,
+-				    name,
+-				    strlen(name),
+-				    offset,
+-				    yaffs_GetObjectInode(l),
+-				    yaffs_GetObjectType(l))
+-			    < 0) {
++					name,
++					strlen(name),
++					offset,
++					yaffs_GetObjectInode(l),
++					yaffs_GetObjectType(l)) < 0)
+ 				goto up_and_out;
+-			}
+ 
+ 			offset++;
+ 			f->f_pos++;
+ 		}
+ 	}
+ 
+-      up_and_out:
+-      out:
+-
++up_and_out:
++out:
+ 	yaffs_GrossUnlock(dev);
+ 
+ 	return 0;
+@@ -1002,12 +1204,19 @@ static int yaffs_readdir(struct file *f,
+ /*
+  * File creation. Allocate an inode, and we're done..
+  */
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29)
++#define YCRED(x) x
++#else
++#define YCRED(x) (x->cred)
++#endif
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode,
+-		       dev_t rdev)
++			dev_t rdev)
+ #else
+ static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode,
+-		       int rdev)
++			int rdev)
+ #endif
+ {
+ 	struct inode *inode;
+@@ -1018,25 +1227,25 @@ static int yaffs_mknod(struct inode *dir
+ 	yaffs_Object *parent = yaffs_InodeToObject(dir);
+ 
+ 	int error = -ENOSPC;
+-	uid_t uid = current->fsuid;
+-	gid_t gid = (dir->i_mode & S_ISGID) ? dir->i_gid : current->fsgid;
++	uid_t uid = YCRED(current)->fsuid;
++	gid_t gid = (dir->i_mode & S_ISGID) ? dir->i_gid : YCRED(current)->fsgid;
+ 
+-	if((dir->i_mode & S_ISGID) && S_ISDIR(mode))
++	if ((dir->i_mode & S_ISGID) && S_ISDIR(mode))
+ 		mode |= S_ISGID;
+ 
+ 	if (parent) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_mknod: parent object %d type %d\n",
+-		   parent->objectId, parent->variantType));
++			("yaffs_mknod: parent object %d type %d\n",
++			parent->objectId, parent->variantType));
+ 	} else {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_mknod: could not get parent object\n"));
++			("yaffs_mknod: could not get parent object\n"));
+ 		return -EPERM;
+ 	}
+ 
+ 	T(YAFFS_TRACE_OS, ("yaffs_mknod: making oject for %s, "
+-			   "mode %x dev %x\n",
+-			   dentry->d_name.name, mode, rdev));
++			"mode %x dev %x\n",
++			dentry->d_name.name, mode, rdev));
+ 
+ 	dev = parent->myDev;
+ 
+@@ -1045,33 +1254,28 @@ static int yaffs_mknod(struct inode *dir
+ 	switch (mode & S_IFMT) {
+ 	default:
+ 		/* Special (socket, fifo, device...) */
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG
+-				   "yaffs_mknod: making special\n"));
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+-		obj =
+-		    yaffs_MknodSpecial(parent, dentry->d_name.name, mode, uid,
+-				       gid, old_encode_dev(rdev));
+-#else
+-		obj =
+-		    yaffs_MknodSpecial(parent, dentry->d_name.name, mode, uid,
+-				       gid, rdev);
++		T(YAFFS_TRACE_OS, ("yaffs_mknod: making special\n"));
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
++		obj = yaffs_MknodSpecial(parent, dentry->d_name.name, mode, uid,
++				gid, old_encode_dev(rdev));
++#else
++		obj = yaffs_MknodSpecial(parent, dentry->d_name.name, mode, uid,
++				gid, rdev);
+ #endif
+ 		break;
+ 	case S_IFREG:		/* file          */
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_mknod: making file\n"));
+-		obj =
+-		    yaffs_MknodFile(parent, dentry->d_name.name, mode, uid,
+-				    gid);
++		T(YAFFS_TRACE_OS, ("yaffs_mknod: making file\n"));
++		obj = yaffs_MknodFile(parent, dentry->d_name.name, mode, uid,
++				gid);
+ 		break;
+ 	case S_IFDIR:		/* directory */
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_mknod: making directory\n"));
+-		obj =
+-		    yaffs_MknodDirectory(parent, dentry->d_name.name, mode,
+-					 uid, gid);
++			("yaffs_mknod: making directory\n"));
++		obj = yaffs_MknodDirectory(parent, dentry->d_name.name, mode,
++					uid, gid);
+ 		break;
+ 	case S_IFLNK:		/* symlink */
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_mknod: making file\n"));
++		T(YAFFS_TRACE_OS, ("yaffs_mknod: making symlink\n"));
+ 		obj = NULL;	/* Do we ever get here? */
+ 		break;
+ 	}
+@@ -1083,12 +1287,12 @@ static int yaffs_mknod(struct inode *dir
+ 		inode = yaffs_get_inode(dir->i_sb, mode, rdev, obj);
+ 		d_instantiate(dentry, inode);
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_mknod created object %d count = %d\n",
+-		   obj->objectId, atomic_read(&inode->i_count)));
++			("yaffs_mknod created object %d count = %d\n",
++			obj->objectId, atomic_read(&inode->i_count)));
+ 		error = 0;
+ 	} else {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_mknod failed making object\n"));
++			("yaffs_mknod failed making object\n"));
+ 		error = -ENOMEM;
+ 	}
+ 
+@@ -1098,25 +1302,19 @@ static int yaffs_mknod(struct inode *dir
+ static int yaffs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
+ {
+ 	int retVal;
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_mkdir\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_mkdir\n"));
+ 	retVal = yaffs_mknod(dir, dentry, mode | S_IFDIR, 0);
+-#if 0
+-	/* attempt to fix dir bug - didn't work */
+-	if (!retVal) {
+-		dget(dentry);
+-	}
+-#endif
+ 	return retVal;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode,
+ 			struct nameidata *n)
+ #else
+ static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode)
+ #endif
+ {
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_create\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_create\n"));
+ 	return yaffs_mknod(dir, dentry, mode | S_IFREG, 0);
+ }
+ 
+@@ -1127,8 +1325,8 @@ static int yaffs_unlink(struct inode *di
+ 	yaffs_Device *dev;
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_unlink %d:%s\n", (int)(dir->i_ino),
+-	   dentry->d_name.name));
++		("yaffs_unlink %d:%s\n", (int)(dir->i_ino),
++		dentry->d_name.name));
+ 
+ 	dev = yaffs_InodeToObject(dir)->myDev;
+ 
+@@ -1151,82 +1349,74 @@ static int yaffs_unlink(struct inode *di
+  * Create a link...
+  */
+ static int yaffs_link(struct dentry *old_dentry, struct inode *dir,
+-		      struct dentry *dentry)
++			struct dentry *dentry)
+ {
+ 	struct inode *inode = old_dentry->d_inode;
+ 	yaffs_Object *obj = NULL;
+ 	yaffs_Object *link = NULL;
+ 	yaffs_Device *dev;
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_link\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_link\n"));
+ 
+ 	obj = yaffs_InodeToObject(inode);
+ 	dev = obj->myDev;
+ 
+ 	yaffs_GrossLock(dev);
+ 
+-	if (!S_ISDIR(inode->i_mode))	/* Don't link directories */
+-	{
+-		link =
+-		    yaffs_Link(yaffs_InodeToObject(dir), dentry->d_name.name,
+-			       obj);
+-	}
++	if (!S_ISDIR(inode->i_mode))		/* Don't link directories */
++		link = yaffs_Link(yaffs_InodeToObject(dir), dentry->d_name.name,
++			obj);
+ 
+ 	if (link) {
+ 		old_dentry->d_inode->i_nlink = yaffs_GetObjectLinkCount(obj);
+ 		d_instantiate(dentry, old_dentry->d_inode);
+ 		atomic_inc(&old_dentry->d_inode->i_count);
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_link link count %d i_count %d\n",
+-		   old_dentry->d_inode->i_nlink,
+-		   atomic_read(&old_dentry->d_inode->i_count)));
+-
++			("yaffs_link link count %d i_count %d\n",
++			old_dentry->d_inode->i_nlink,
++			atomic_read(&old_dentry->d_inode->i_count)));
+ 	}
+ 
+ 	yaffs_GrossUnlock(dev);
+ 
+-	if (link) {
+-
++	if (link)
+ 		return 0;
+-	}
+ 
+ 	return -EPERM;
+ }
+ 
+ static int yaffs_symlink(struct inode *dir, struct dentry *dentry,
+-			 const char *symname)
++				const char *symname)
+ {
+ 	yaffs_Object *obj;
+ 	yaffs_Device *dev;
+-	uid_t uid = current->fsuid;
+-	gid_t gid = (dir->i_mode & S_ISGID) ? dir->i_gid : current->fsgid;
++	uid_t uid = YCRED(current)->fsuid;
++	gid_t gid = (dir->i_mode & S_ISGID) ? dir->i_gid : YCRED(current)->fsgid;
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_symlink\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_symlink\n"));
+ 
+ 	dev = yaffs_InodeToObject(dir)->myDev;
+ 	yaffs_GrossLock(dev);
+ 	obj = yaffs_MknodSymLink(yaffs_InodeToObject(dir), dentry->d_name.name,
+-				 S_IFLNK | S_IRWXUGO, uid, gid, symname);
++				S_IFLNK | S_IRWXUGO, uid, gid, symname);
+ 	yaffs_GrossUnlock(dev);
+ 
+ 	if (obj) {
+-
+ 		struct inode *inode;
+ 
+ 		inode = yaffs_get_inode(dir->i_sb, obj->yst_mode, 0, obj);
+ 		d_instantiate(dentry, inode);
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG "symlink created OK\n"));
++		T(YAFFS_TRACE_OS, ("symlink created OK\n"));
+ 		return 0;
+ 	} else {
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG "symlink not created\n"));
+-
++		T(YAFFS_TRACE_OS, ("symlink not created\n"));
+ 	}
+ 
+ 	return -ENOMEM;
+ }
+ 
+ static int yaffs_sync_object(struct file *file, struct dentry *dentry,
+-			     int datasync)
++				int datasync)
+ {
+ 
+ 	yaffs_Object *obj;
+@@ -1236,7 +1426,7 @@ static int yaffs_sync_object(struct file
+ 
+ 	dev = obj->myDev;
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_sync_object\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_sync_object\n"));
+ 	yaffs_GrossLock(dev);
+ 	yaffs_FlushFile(obj, 1);
+ 	yaffs_GrossUnlock(dev);
+@@ -1255,41 +1445,36 @@ static int yaffs_rename(struct inode *ol
+ 	int retVal = YAFFS_FAIL;
+ 	yaffs_Object *target;
+ 
+-        T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_rename\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_rename\n"));
+ 	dev = yaffs_InodeToObject(old_dir)->myDev;
+ 
+ 	yaffs_GrossLock(dev);
+ 
+ 	/* Check if the target is an existing directory that is not empty. */
+-	target =
+-	    yaffs_FindObjectByName(yaffs_InodeToObject(new_dir),
+-				   new_dentry->d_name.name);
++	target = yaffs_FindObjectByName(yaffs_InodeToObject(new_dir),
++				new_dentry->d_name.name);
+ 
+ 
+ 
+-	if (target &&
+-	    target->variantType == YAFFS_OBJECT_TYPE_DIRECTORY &&
+-	    !list_empty(&target->variant.directoryVariant.children)) {
++	if (target && target->variantType == YAFFS_OBJECT_TYPE_DIRECTORY &&
++		!ylist_empty(&target->variant.directoryVariant.children)) {
+ 
+-	        T(YAFFS_TRACE_OS, (KERN_DEBUG "target is non-empty dir\n"));
++		T(YAFFS_TRACE_OS, ("target is non-empty dir\n"));
+ 
+ 		retVal = YAFFS_FAIL;
+ 	} else {
+-
+ 		/* Now does unlinking internally using shadowing mechanism */
+-	        T(YAFFS_TRACE_OS, (KERN_DEBUG "calling yaffs_RenameObject\n"));
+-
+-		retVal =
+-		    yaffs_RenameObject(yaffs_InodeToObject(old_dir),
+-				       old_dentry->d_name.name,
+-				       yaffs_InodeToObject(new_dir),
+-				       new_dentry->d_name.name);
++		T(YAFFS_TRACE_OS, ("calling yaffs_RenameObject\n"));
+ 
++		retVal = yaffs_RenameObject(yaffs_InodeToObject(old_dir),
++				old_dentry->d_name.name,
++				yaffs_InodeToObject(new_dir),
++				new_dentry->d_name.name);
+ 	}
+ 	yaffs_GrossUnlock(dev);
+ 
+ 	if (retVal == YAFFS_OK) {
+-		if(target) {
++		if (target) {
+ 			new_dentry->d_inode->i_nlink--;
+ 			mark_inode_dirty(new_dentry->d_inode);
+ 		}
+@@ -1298,7 +1483,6 @@ static int yaffs_rename(struct inode *ol
+ 	} else {
+ 		return -ENOTEMPTY;
+ 	}
+-
+ }
+ 
+ static int yaffs_setattr(struct dentry *dentry, struct iattr *attr)
+@@ -1308,15 +1492,15 @@ static int yaffs_setattr(struct dentry *
+ 	yaffs_Device *dev;
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_setattr of object %d\n",
+-	   yaffs_InodeToObject(inode)->objectId));
+-
+-	if ((error = inode_change_ok(inode, attr)) == 0) {
++		("yaffs_setattr of object %d\n",
++		yaffs_InodeToObject(inode)->objectId));
+ 
++	error = inode_change_ok(inode, attr);
++	if (error == 0) {
+ 		dev = yaffs_InodeToObject(inode)->myDev;
+ 		yaffs_GrossLock(dev);
+ 		if (yaffs_SetAttributes(yaffs_InodeToObject(inode), attr) ==
+-		    YAFFS_OK) {
++				YAFFS_OK) {
+ 			error = 0;
+ 		} else {
+ 			error = -EPERM;
+@@ -1328,12 +1512,12 @@ static int yaffs_setattr(struct dentry *
+ 	return error;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_statfs(struct dentry *dentry, struct kstatfs *buf)
+ {
+ 	yaffs_Device *dev = yaffs_DentryToObject(dentry)->myDev;
+ 	struct super_block *sb = dentry->d_sb;
+-#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_statfs(struct super_block *sb, struct kstatfs *buf)
+ {
+ 	yaffs_Device *dev = yaffs_SuperToDevice(sb);
+@@ -1343,32 +1527,53 @@ static int yaffs_statfs(struct super_blo
+ 	yaffs_Device *dev = yaffs_SuperToDevice(sb);
+ #endif
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_statfs\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_statfs\n"));
+ 
+ 	yaffs_GrossLock(dev);
+ 
+ 	buf->f_type = YAFFS_MAGIC;
+ 	buf->f_bsize = sb->s_blocksize;
+ 	buf->f_namelen = 255;
+-	if (sb->s_blocksize > dev->nDataBytesPerChunk) {
++
++	if (dev->nDataBytesPerChunk & (dev->nDataBytesPerChunk - 1)) {
++		/* Do this if chunk size is not a power of 2 */
++
++		uint64_t bytesInDev;
++		uint64_t bytesFree;
++
++		bytesInDev = ((uint64_t)((dev->endBlock - dev->startBlock + 1))) *
++			((uint64_t)(dev->nChunksPerBlock * dev->nDataBytesPerChunk));
++
++		do_div(bytesInDev, sb->s_blocksize); /* bytesInDev becomes the number of blocks */
++		buf->f_blocks = bytesInDev;
++
++		bytesFree  = ((uint64_t)(yaffs_GetNumberOfFreeChunks(dev))) *
++			((uint64_t)(dev->nDataBytesPerChunk));
++
++		do_div(bytesFree, sb->s_blocksize);
++
++		buf->f_bfree = bytesFree;
++
++	} else if (sb->s_blocksize > dev->nDataBytesPerChunk) {
+ 
+ 		buf->f_blocks =
+-		    (dev->endBlock - dev->startBlock +
+-		     1) * dev->nChunksPerBlock / (sb->s_blocksize /
+-						  dev->nDataBytesPerChunk);
++			(dev->endBlock - dev->startBlock + 1) *
++			dev->nChunksPerBlock /
++			(sb->s_blocksize / dev->nDataBytesPerChunk);
+ 		buf->f_bfree =
+-		    yaffs_GetNumberOfFreeChunks(dev) / (sb->s_blocksize /
+-							dev->nDataBytesPerChunk);
++			yaffs_GetNumberOfFreeChunks(dev) /
++			(sb->s_blocksize / dev->nDataBytesPerChunk);
+ 	} else {
+-
+ 		buf->f_blocks =
+-		    (dev->endBlock - dev->startBlock +
+-		     1) * dev->nChunksPerBlock * (dev->nDataBytesPerChunk /
+-						  sb->s_blocksize);
++			(dev->endBlock - dev->startBlock + 1) *
++			dev->nChunksPerBlock *
++			(dev->nDataBytesPerChunk / sb->s_blocksize);
++
+ 		buf->f_bfree =
+-		    yaffs_GetNumberOfFreeChunks(dev) * (dev->nDataBytesPerChunk /
+-							sb->s_blocksize);
++			yaffs_GetNumberOfFreeChunks(dev) *
++			(dev->nDataBytesPerChunk / sb->s_blocksize);
+ 	}
++
+ 	buf->f_files = 0;
+ 	buf->f_ffree = 0;
+ 	buf->f_bavail = buf->f_bfree;
+@@ -1378,18 +1583,19 @@ static int yaffs_statfs(struct super_blo
+ }
+ 
+ 
+-/**
+ static int yaffs_do_sync_fs(struct super_block *sb)
+ {
+ 
+ 	yaffs_Device *dev = yaffs_SuperToDevice(sb);
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_do_sync_fs\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_do_sync_fs\n"));
+ 
+-	if(sb->s_dirt) {
++	if (sb->s_dirt) {
+ 		yaffs_GrossLock(dev);
+ 
+-		if(dev)
++		if (dev) {
++			yaffs_FlushEntireDeviceCache(dev);
+ 			yaffs_CheckpointSave(dev);
++		}
+ 
+ 		yaffs_GrossUnlock(dev);
+ 
+@@ -1397,35 +1603,73 @@ static int yaffs_do_sync_fs(struct super
+ 	}
+ 	return 0;
+ }
+-**/
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static void yaffs_write_super(struct super_block *sb)
+ #else
+ static int yaffs_write_super(struct super_block *sb)
+ #endif
+ {
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_write_super\n"));
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18))
+-	return 0; /* yaffs_do_sync_fs(sb);*/
++	T(YAFFS_TRACE_OS, ("yaffs_write_super\n"));
++	if (yaffs_auto_checkpoint >= 2)
++		yaffs_do_sync_fs(sb);
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 18))
++	return 0;
+ #endif
+ }
+ 
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_sync_fs(struct super_block *sb, int wait)
+ #else
+ static int yaffs_sync_fs(struct super_block *sb)
+ #endif
+ {
++	T(YAFFS_TRACE_OS, ("yaffs_sync_fs\n"));
++
++	if (yaffs_auto_checkpoint >= 1)
++		yaffs_do_sync_fs(sb);
++
++	return 0;
++}
++
++#ifdef YAFFS_USE_OWN_IGET
++
++static struct inode *yaffs_iget(struct super_block *sb, unsigned long ino)
++{
++	struct inode *inode;
++	yaffs_Object *obj;
++	yaffs_Device *dev = yaffs_SuperToDevice(sb);
++
++	T(YAFFS_TRACE_OS,
++		("yaffs_iget for %lu\n", ino));
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_sync_fs\n"));
++	inode = iget_locked(sb, ino);
++	if (!inode)
++		return ERR_PTR(-ENOMEM);
++	if (!(inode->i_state & I_NEW))
++		return inode;
++
++	/* NB This is called as a side effect of other functions, but
++	 * we had to release the lock to prevent deadlocks, so
++	 * need to lock again.
++	 */
+ 
+-	return 0; /* yaffs_do_sync_fs(sb);*/
++	yaffs_GrossLock(dev);
+ 
++	obj = yaffs_FindObjectByNumber(dev, inode->i_ino);
++
++	yaffs_FillInodeFromObject(inode, obj);
++
++	yaffs_GrossUnlock(dev);
++
++	unlock_new_inode(inode);
++	return inode;
+ }
+ 
++#else
+ 
+ static void yaffs_read_inode(struct inode *inode)
+ {
+@@ -1438,7 +1682,7 @@ static void yaffs_read_inode(struct inod
+ 	yaffs_Device *dev = yaffs_SuperToDevice(inode->i_sb);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_read_inode for %d\n", (int)inode->i_ino));
++		("yaffs_read_inode for %d\n", (int)inode->i_ino));
+ 
+ 	yaffs_GrossLock(dev);
+ 
+@@ -1449,18 +1693,20 @@ static void yaffs_read_inode(struct inod
+ 	yaffs_GrossUnlock(dev);
+ }
+ 
+-static LIST_HEAD(yaffs_dev_list);
++#endif
++
++static YLIST_HEAD(yaffs_dev_list);
+ 
+-#if 0 // not used
++#if 0 /* not used */
+ static int yaffs_remount_fs(struct super_block *sb, int *flags, char *data)
+ {
+ 	yaffs_Device    *dev = yaffs_SuperToDevice(sb);
+ 
+-	if( *flags & MS_RDONLY ) {
++	if (*flags & MS_RDONLY) {
+ 		struct mtd_info *mtd = yaffs_SuperToDevice(sb)->genericDevice;
+ 
+ 		T(YAFFS_TRACE_OS,
+-			(KERN_DEBUG "yaffs_remount_fs: %s: RO\n", dev->name ));
++			("yaffs_remount_fs: %s: RO\n", dev->name));
+ 
+ 		yaffs_GrossLock(dev);
+ 
+@@ -1472,10 +1718,9 @@ static int yaffs_remount_fs(struct super
+ 			mtd->sync(mtd);
+ 
+ 		yaffs_GrossUnlock(dev);
+-	}
+-	else {
++	} else {
+ 		T(YAFFS_TRACE_OS,
+-			(KERN_DEBUG "yaffs_remount_fs: %s: RW\n", dev->name ));
++			("yaffs_remount_fs: %s: RW\n", dev->name));
+ 	}
+ 
+ 	return 0;
+@@ -1486,7 +1731,7 @@ static void yaffs_put_super(struct super
+ {
+ 	yaffs_Device *dev = yaffs_SuperToDevice(sb);
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_put_super\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_put_super\n"));
+ 
+ 	yaffs_GrossLock(dev);
+ 
+@@ -1494,18 +1739,17 @@ static void yaffs_put_super(struct super
+ 
+ 	yaffs_CheckpointSave(dev);
+ 
+-	if (dev->putSuperFunc) {
++	if (dev->putSuperFunc)
+ 		dev->putSuperFunc(sb);
+-	}
+ 
+ 	yaffs_Deinitialise(dev);
+ 
+ 	yaffs_GrossUnlock(dev);
+ 
+ 	/* we assume this is protected by lock_kernel() in mount/umount */
+-	list_del(&dev->devList);
++	ylist_del(&dev->devList);
+ 
+-	if(dev->spareBuffer){
++	if (dev->spareBuffer) {
+ 		YFREE(dev->spareBuffer);
+ 		dev->spareBuffer = NULL;
+ 	}
+@@ -1516,12 +1760,10 @@ static void yaffs_put_super(struct super
+ 
+ static void yaffs_MTDPutSuper(struct super_block *sb)
+ {
+-
+ 	struct mtd_info *mtd = yaffs_SuperToDevice(sb)->genericDevice;
+ 
+-	if (mtd->sync) {
++	if (mtd->sync)
+ 		mtd->sync(mtd);
+-	}
+ 
+ 	put_mtd_device(mtd);
+ }
+@@ -1531,9 +1773,9 @@ static void yaffs_MarkSuperBlockDirty(vo
+ {
+ 	struct super_block *sb = (struct super_block *)vsb;
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_MarkSuperBlockDirty() sb = %p\n",sb));
+-//	if(sb)
+-//		sb->s_dirt = 1;
++	T(YAFFS_TRACE_OS, ("yaffs_MarkSuperBlockDirty() sb = %p\n", sb));
++	if (sb)
++		sb->s_dirt = 1;
+ }
+ 
+ typedef struct {
+@@ -1546,48 +1788,48 @@ typedef struct {
+ #define MAX_OPT_LEN 20
+ static int yaffs_parse_options(yaffs_options *options, const char *options_str)
+ {
+-	char cur_opt[MAX_OPT_LEN+1];
++	char cur_opt[MAX_OPT_LEN + 1];
+ 	int p;
+ 	int error = 0;
+ 
+ 	/* Parse through the options which is a comma seperated list */
+ 
+-	while(options_str && *options_str && !error){
+-		memset(cur_opt,0,MAX_OPT_LEN+1);
++	while (options_str && *options_str && !error) {
++		memset(cur_opt, 0, MAX_OPT_LEN + 1);
+ 		p = 0;
+ 
+-		while(*options_str && *options_str != ','){
+-			if(p < MAX_OPT_LEN){
++		while (*options_str && *options_str != ',') {
++			if (p < MAX_OPT_LEN) {
+ 				cur_opt[p] = *options_str;
+ 				p++;
+ 			}
+ 			options_str++;
+ 		}
+ 
+-		if(!strcmp(cur_opt,"inband-tags"))
++		if (!strcmp(cur_opt, "inband-tags"))
+ 			options->inband_tags = 1;
+-		else if(!strcmp(cur_opt,"no-cache"))
++		else if (!strcmp(cur_opt, "no-cache"))
+ 			options->no_cache = 1;
+-		else if(!strcmp(cur_opt,"no-checkpoint-read"))
++		else if (!strcmp(cur_opt, "no-checkpoint-read"))
+ 			options->skip_checkpoint_read = 1;
+-		else if(!strcmp(cur_opt,"no-checkpoint-write"))
++		else if (!strcmp(cur_opt, "no-checkpoint-write"))
+ 			options->skip_checkpoint_write = 1;
+-		else if(!strcmp(cur_opt,"no-checkpoint")){
++		else if (!strcmp(cur_opt, "no-checkpoint")) {
+ 			options->skip_checkpoint_read = 1;
+ 			options->skip_checkpoint_write = 1;
+ 		} else {
+-			printk(KERN_INFO "yaffs: Bad mount option \"%s\"\n",cur_opt);
++			printk(KERN_INFO "yaffs: Bad mount option \"%s\"\n",
++					cur_opt);
+ 			error = 1;
+ 		}
+-
+ 	}
+ 
+ 	return error;
+ }
+ 
+ static struct super_block *yaffs_internal_read_super(int yaffsVersion,
+-						     struct super_block *sb,
+-						     void *data, int silent)
++						struct super_block *sb,
++						void *data, int silent)
+ {
+ 	int nBlocks;
+ 	struct inode *inode = NULL;
+@@ -1602,6 +1844,7 @@ static struct super_block *yaffs_interna
+ 
+ 	sb->s_magic = YAFFS_MAGIC;
+ 	sb->s_op = &yaffs_super_ops;
++	sb->s_flags |= MS_NOATIME;
+ 
+ 	if (!sb)
+ 		printk(KERN_INFO "yaffs: sb is NULL\n");
+@@ -1614,14 +1857,14 @@ static struct super_block *yaffs_interna
+ 		       sb->s_dev,
+ 		       yaffs_devname(sb, devname_buf));
+ 
+-	if(!data_str)
++	if (!data_str)
+ 		data_str = "";
+ 
+-	printk(KERN_INFO "yaffs: passed flags \"%s\"\n",data_str);
++	printk(KERN_INFO "yaffs: passed flags \"%s\"\n", data_str);
+ 
+-	memset(&options,0,sizeof(options));
++	memset(&options, 0, sizeof(options));
+ 
+-	if(yaffs_parse_options(&options,data_str)){
++	if (yaffs_parse_options(&options, data_str)) {
+ 		/* Option parsing failed */
+ 		return NULL;
+ 	}
+@@ -1645,9 +1888,9 @@ static struct super_block *yaffs_interna
+ 			       yaffs_devname(sb, devname_buf)));
+ 
+ 	/* Check it's an mtd device..... */
+-	if (MAJOR(sb->s_dev) != MTD_BLOCK_MAJOR) {
++	if (MAJOR(sb->s_dev) != MTD_BLOCK_MAJOR)
+ 		return NULL;	/* This isn't an mtd device */
+-	}
++
+ 	/* Get the device */
+ 	mtd = get_mtd_device(NULL, MINOR(sb->s_dev));
+ 	if (!mtd) {
+@@ -1673,29 +1916,23 @@ static struct super_block *yaffs_interna
+ 	T(YAFFS_TRACE_OS, (" %s %d\n", WRITE_SIZE_STR, WRITE_SIZE(mtd)));
+ 	T(YAFFS_TRACE_OS, (" oobsize %d\n", mtd->oobsize));
+ 	T(YAFFS_TRACE_OS, (" erasesize %d\n", mtd->erasesize));
+-	T(YAFFS_TRACE_OS, (" size %d\n", mtd->size));
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29)
++	T(YAFFS_TRACE_OS, (" size %u\n", mtd->size));
++#else
++	T(YAFFS_TRACE_OS, (" size %lld\n", mtd->size));
++#endif
+ 
+ #ifdef CONFIG_YAFFS_AUTO_YAFFS2
+ 
+-	if (yaffsVersion == 1 &&
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-	    mtd->writesize >= 2048) {
+-#else
+-	    mtd->oobblock >= 2048) {
+-#endif
+-	    T(YAFFS_TRACE_ALWAYS,("yaffs: auto selecting yaffs2\n"));
+-	    yaffsVersion = 2;
++	if (yaffsVersion == 1 && WRITE_SIZE(mtd) >= 2048) {
++		T(YAFFS_TRACE_ALWAYS, ("yaffs: auto selecting yaffs2\n"));
++		yaffsVersion = 2;
+ 	}
+ 
+ 	/* Added NCB 26/5/2006 for completeness */
+-	if (yaffsVersion == 2 &&
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-	    mtd->writesize == 512) {
+-#else
+-	    mtd->oobblock == 512) {
+-#endif
+-	    T(YAFFS_TRACE_ALWAYS,("yaffs: auto selecting yaffs1\n"));
+-	    yaffsVersion = 1;
++	if (yaffsVersion == 2 && !options.inband_tags && WRITE_SIZE(mtd) == 512) {
++		T(YAFFS_TRACE_ALWAYS, ("yaffs: auto selecting yaffs1\n"));
++		yaffsVersion = 1;
+ 	}
+ 
+ #endif
+@@ -1707,7 +1944,7 @@ static struct super_block *yaffs_interna
+ 		    !mtd->block_markbad ||
+ 		    !mtd->read ||
+ 		    !mtd->write ||
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ 		    !mtd->read_oob || !mtd->write_oob) {
+ #else
+ 		    !mtd->write_ecc ||
+@@ -1719,12 +1956,9 @@ static struct super_block *yaffs_interna
+ 			return NULL;
+ 		}
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-		if (mtd->writesize < YAFFS_MIN_YAFFS2_CHUNK_SIZE ||
+-#else
+-		if (mtd->oobblock < YAFFS_MIN_YAFFS2_CHUNK_SIZE ||
+-#endif
+-		    mtd->oobsize < YAFFS_MIN_YAFFS2_SPARE_SIZE) {
++		if ((WRITE_SIZE(mtd) < YAFFS_MIN_YAFFS2_CHUNK_SIZE ||
++		    mtd->oobsize < YAFFS_MIN_YAFFS2_SPARE_SIZE) &&
++		    !options.inband_tags) {
+ 			T(YAFFS_TRACE_ALWAYS,
+ 			  ("yaffs: MTD device does not have the "
+ 			   "right page sizes\n"));
+@@ -1735,7 +1969,7 @@ static struct super_block *yaffs_interna
+ 		if (!mtd->erase ||
+ 		    !mtd->read ||
+ 		    !mtd->write ||
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ 		    !mtd->read_oob || !mtd->write_oob) {
+ #else
+ 		    !mtd->write_ecc ||
+@@ -1761,7 +1995,7 @@ static struct super_block *yaffs_interna
+ 	 * Set the yaffs_Device up for mtd
+ 	 */
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 	sb->s_fs_info = dev = kmalloc(sizeof(yaffs_Device), GFP_KERNEL);
+ #else
+ 	sb->u.generic_sbp = dev = kmalloc(sizeof(yaffs_Device), GFP_KERNEL);
+@@ -1780,13 +2014,15 @@ static struct super_block *yaffs_interna
+ 
+ 	/* Set up the memory size parameters.... */
+ 
+-	nBlocks = mtd->size / (YAFFS_CHUNKS_PER_BLOCK * YAFFS_BYTES_PER_CHUNK);
++	nBlocks = YCALCBLOCKS(mtd->size, (YAFFS_CHUNKS_PER_BLOCK * YAFFS_BYTES_PER_CHUNK));
++
+ 	dev->startBlock = 0;
+ 	dev->endBlock = nBlocks - 1;
+ 	dev->nChunksPerBlock = YAFFS_CHUNKS_PER_BLOCK;
+-	dev->nDataBytesPerChunk = YAFFS_BYTES_PER_CHUNK;
++	dev->totalBytesPerChunk = YAFFS_BYTES_PER_CHUNK;
+ 	dev->nReservedBlocks = 5;
+ 	dev->nShortOpCaches = (options.no_cache) ? 0 : 10;
++	dev->inbandTags = options.inband_tags;
+ 
+ 	/* ... and the functions. */
+ 	if (yaffsVersion == 2) {
+@@ -1798,20 +2034,19 @@ static struct super_block *yaffs_interna
+ 		dev->queryNANDBlock = nandmtd2_QueryNANDBlock;
+ 		dev->spareBuffer = YMALLOC(mtd->oobsize);
+ 		dev->isYaffs2 = 1;
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-		dev->nDataBytesPerChunk = mtd->writesize;
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
++		dev->totalBytesPerChunk = mtd->writesize;
+ 		dev->nChunksPerBlock = mtd->erasesize / mtd->writesize;
+ #else
+-		dev->nDataBytesPerChunk = mtd->oobblock;
++		dev->totalBytesPerChunk = mtd->oobblock;
+ 		dev->nChunksPerBlock = mtd->erasesize / mtd->oobblock;
+ #endif
+-		nBlocks = mtd->size / mtd->erasesize;
++		nBlocks = YCALCBLOCKS(mtd->size, mtd->erasesize);
+ 
+-		dev->nCheckpointReservedBlocks = CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS;
+ 		dev->startBlock = 0;
+ 		dev->endBlock = nBlocks - 1;
+ 	} else {
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ 		/* use the MTD interface in yaffs_mtdif1.c */
+ 		dev->writeChunkWithTagsToNAND =
+ 			nandmtd1_WriteChunkWithTagsToNAND;
+@@ -1847,7 +2082,7 @@ static struct super_block *yaffs_interna
+ 	dev->skipCheckpointWrite = options.skip_checkpoint_write;
+ 
+ 	/* we assume this is protected by lock_kernel() in mount/umount */
+-	list_add_tail(&dev->devList, &yaffs_dev_list);
++	ylist_add_tail(&dev->devList, &yaffs_dev_list);
+ 
+ 	init_MUTEX(&dev->grossLock);
+ 
+@@ -1884,20 +2119,23 @@ static struct super_block *yaffs_interna
+ 		return NULL;
+ 	}
+ 	sb->s_root = root;
++	sb->s_dirt = !dev->isCheckpointed;
++	T(YAFFS_TRACE_ALWAYS,
++	  ("yaffs_read_super: isCheckpointed %d\n", dev->isCheckpointed));
+ 
+ 	T(YAFFS_TRACE_OS, ("yaffs_read_super: done\n"));
+ 	return sb;
+ }
+ 
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_internal_read_super_mtd(struct super_block *sb, void *data,
+ 					 int silent)
+ {
+ 	return yaffs_internal_read_super(1, sb, data, silent) ? 0 : -EINVAL;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_read_super(struct file_system_type *fs,
+ 			    int flags, const char *dev_name,
+ 			    void *data, struct vfsmount *mnt)
+@@ -1938,14 +2176,14 @@ static DECLARE_FSTYPE(yaffs_fs_type, "ya
+ 
+ #ifdef CONFIG_YAFFS_YAFFS2
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs2_internal_read_super_mtd(struct super_block *sb, void *data,
+ 					  int silent)
+ {
+ 	return yaffs_internal_read_super(2, sb, data, silent) ? 0 : -EINVAL;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs2_read_super(struct file_system_type *fs,
+ 			int flags, const char *dev_name, void *data,
+ 			struct vfsmount *mnt)
+@@ -1990,12 +2228,12 @@ static char *yaffs_dump_dev(char *buf, y
+ {
+ 	buf += sprintf(buf, "startBlock......... %d\n", dev->startBlock);
+ 	buf += sprintf(buf, "endBlock........... %d\n", dev->endBlock);
++	buf += sprintf(buf, "totalBytesPerChunk. %d\n", dev->totalBytesPerChunk);
+ 	buf += sprintf(buf, "nDataBytesPerChunk. %d\n", dev->nDataBytesPerChunk);
+ 	buf += sprintf(buf, "chunkGroupBits..... %d\n", dev->chunkGroupBits);
+ 	buf += sprintf(buf, "chunkGroupSize..... %d\n", dev->chunkGroupSize);
+ 	buf += sprintf(buf, "nErasedBlocks...... %d\n", dev->nErasedBlocks);
+ 	buf += sprintf(buf, "nReservedBlocks.... %d\n", dev->nReservedBlocks);
+-	buf += sprintf(buf, "nCheckptResBlocks.. %d\n", dev->nCheckpointReservedBlocks);
+ 	buf += sprintf(buf, "blocksInCheckpoint. %d\n", dev->blocksInCheckpoint);
+ 	buf += sprintf(buf, "nTnodesCreated..... %d\n", dev->nTnodesCreated);
+ 	buf += sprintf(buf, "nFreeTnodes........ %d\n", dev->nFreeTnodes);
+@@ -2006,10 +2244,8 @@ static char *yaffs_dump_dev(char *buf, y
+ 	buf += sprintf(buf, "nPageReads......... %d\n", dev->nPageReads);
+ 	buf += sprintf(buf, "nBlockErasures..... %d\n", dev->nBlockErasures);
+ 	buf += sprintf(buf, "nGCCopies.......... %d\n", dev->nGCCopies);
+-	buf +=
+-	    sprintf(buf, "garbageCollections. %d\n", dev->garbageCollections);
+-	buf +=
+-	    sprintf(buf, "passiveGCs......... %d\n",
++	buf += sprintf(buf, "garbageCollections. %d\n", dev->garbageCollections);
++	buf += sprintf(buf, "passiveGCs......... %d\n",
+ 		    dev->passiveGarbageCollections);
+ 	buf += sprintf(buf, "nRetriedWrites..... %d\n", dev->nRetriedWrites);
+ 	buf += sprintf(buf, "nShortOpCaches..... %d\n", dev->nShortOpCaches);
+@@ -2025,6 +2261,7 @@ static char *yaffs_dump_dev(char *buf, y
+ 	    sprintf(buf, "nBackgroudDeletions %d\n", dev->nBackgroundDeletions);
+ 	buf += sprintf(buf, "useNANDECC......... %d\n", dev->useNANDECC);
+ 	buf += sprintf(buf, "isYaffs2........... %d\n", dev->isYaffs2);
++	buf += sprintf(buf, "inbandTags......... %d\n", dev->inbandTags);
+ 
+ 	return buf;
+ }
+@@ -2033,7 +2270,7 @@ static int yaffs_proc_read(char *page,
+ 			   char **start,
+ 			   off_t offset, int count, int *eof, void *data)
+ {
+-	struct list_head *item;
++	struct ylist_head *item;
+ 	char *buf = page;
+ 	int step = offset;
+ 	int n = 0;
+@@ -2057,8 +2294,8 @@ static int yaffs_proc_read(char *page,
+ 	lock_kernel();
+ 
+ 	/* Locate and print the Nth entry.  Order N-squared but N is small. */
+-	list_for_each(item, &yaffs_dev_list) {
+-		yaffs_Device *dev = list_entry(item, yaffs_Device, devList);
++	ylist_for_each(item, &yaffs_dev_list) {
++		yaffs_Device *dev = ylist_entry(item, yaffs_Device, devList);
+ 		if (n < step) {
+ 			n++;
+ 			continue;
+@@ -2119,7 +2356,7 @@ static int yaffs_proc_write(struct file 
+ 	char *end;
+ 	char *mask_name;
+ 	const char *x;
+-	char substring[MAX_MASK_NAME_LENGTH+1];
++	char substring[MAX_MASK_NAME_LENGTH + 1];
+ 	int i;
+ 	int done = 0;
+ 	int add, len = 0;
+@@ -2129,9 +2366,8 @@ static int yaffs_proc_write(struct file 
+ 
+ 	while (!done && (pos < count)) {
+ 		done = 1;
+-		while ((pos < count) && isspace(buf[pos])) {
++		while ((pos < count) && isspace(buf[pos]))
+ 			pos++;
+-		}
+ 
+ 		switch (buf[pos]) {
+ 		case '+':
+@@ -2148,20 +2384,21 @@ static int yaffs_proc_write(struct file 
+ 		mask_name = NULL;
+ 
+ 		mask_bitfield = simple_strtoul(buf + pos, &end, 0);
++
+ 		if (end > buf + pos) {
+ 			mask_name = "numeral";
+ 			len = end - (buf + pos);
+ 			pos += len;
+ 			done = 0;
+ 		} else {
+-			for(x = buf + pos, i = 0;
+-			    (*x == '_' || (*x >='a' && *x <= 'z')) &&
+-			    i <MAX_MASK_NAME_LENGTH; x++, i++, pos++)
+-			    substring[i] = *x;
++			for (x = buf + pos, i = 0;
++			    (*x == '_' || (*x >= 'a' && *x <= 'z')) &&
++			    i < MAX_MASK_NAME_LENGTH; x++, i++, pos++)
++				substring[i] = *x;
+ 			substring[i] = '\0';
+ 
+ 			for (i = 0; mask_flags[i].mask_name != NULL; i++) {
+-				if(strcmp(substring,mask_flags[i].mask_name) == 0){
++				if (strcmp(substring, mask_flags[i].mask_name) == 0) {
+ 					mask_name = mask_flags[i].mask_name;
+ 					mask_bitfield = mask_flags[i].mask_bitfield;
+ 					done = 0;
+@@ -2172,7 +2409,7 @@ static int yaffs_proc_write(struct file 
+ 
+ 		if (mask_name != NULL) {
+ 			done = 0;
+-			switch(add) {
++			switch (add) {
+ 			case '-':
+ 				rg &= ~mask_bitfield;
+ 				break;
+@@ -2191,13 +2428,13 @@ static int yaffs_proc_write(struct file 
+ 
+ 	yaffs_traceMask = rg | YAFFS_TRACE_ALWAYS;
+ 
+-	printk("new trace = 0x%08X\n",yaffs_traceMask);
++	printk(KERN_DEBUG "new trace = 0x%08X\n", yaffs_traceMask);
+ 
+ 	if (rg & YAFFS_TRACE_ALWAYS) {
+ 		for (i = 0; mask_flags[i].mask_name != NULL; i++) {
+ 			char flag;
+ 			flag = ((rg & mask_flags[i].mask_bitfield) == mask_flags[i].mask_bitfield) ? '+' : '-';
+-			printk("%c%s\n", flag, mask_flags[i].mask_name);
++			printk(KERN_DEBUG "%c%s\n", flag, mask_flags[i].mask_name);
+ 		}
+ 	}
+ 
+@@ -2211,12 +2448,8 @@ struct file_system_to_install {
+ };
+ 
+ static struct file_system_to_install fs_to_install[] = {
+-//#ifdef CONFIG_YAFFS_YAFFS1
+ 	{&yaffs_fs_type, 0},
+-//#endif
+-//#ifdef CONFIG_YAFFS_YAFFS2
+ 	{&yaffs2_fs_type, 0},
+-//#endif
+ 	{NULL, 0}
+ };
+ 
+@@ -2231,15 +2464,14 @@ static int __init init_yaffs_fs(void)
+ 	/* Install the proc_fs entry */
+ 	my_proc_entry = create_proc_entry("yaffs",
+ 					       S_IRUGO | S_IFREG,
+-					       &proc_root);
++					       YPROC_ROOT);
+ 
+ 	if (my_proc_entry) {
+ 		my_proc_entry->write_proc = yaffs_proc_write;
+ 		my_proc_entry->read_proc = yaffs_proc_read;
+ 		my_proc_entry->data = NULL;
+-	} else {
++	} else
+ 		return -ENOMEM;
+-	}
+ 
+ 	/* Now add the file system entries */
+ 
+@@ -2247,9 +2479,8 @@ static int __init init_yaffs_fs(void)
+ 
+ 	while (fsinst->fst && !error) {
+ 		error = register_filesystem(fsinst->fst);
+-		if (!error) {
++		if (!error)
+ 			fsinst->installed = 1;
+-		}
+ 		fsinst++;
+ 	}
+ 
+@@ -2277,7 +2508,7 @@ static void __exit exit_yaffs_fs(void)
+ 	T(YAFFS_TRACE_ALWAYS, ("yaffs " __DATE__ " " __TIME__
+ 			       " removing. \n"));
+ 
+-	remove_proc_entry("yaffs", &proc_root);
++	remove_proc_entry("yaffs", YPROC_ROOT);
+ 
+ 	fsinst = fs_to_install;
+ 
+@@ -2288,7 +2519,6 @@ static void __exit exit_yaffs_fs(void)
+ 		}
+ 		fsinst++;
+ 	}
+-
+ }
+ 
+ module_init(init_yaffs_fs)
+--- /dev/null
++++ b/fs/yaffs2/yaffs_getblockinfo.h
+@@ -0,0 +1,34 @@
++/*
++ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
++ *
++ * Copyright (C) 2002-2007 Aleph One Ltd.
++ *   for Toby Churchill Ltd and Brightstar Engineering
++ *
++ * Created by Charles Manning <charles@aleph1.co.uk>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU Lesser General Public License version 2.1 as
++ * published by the Free Software Foundation.
++ *
++ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
++ */
++
++#ifndef __YAFFS_GETBLOCKINFO_H__
++#define __YAFFS_GETBLOCKINFO_H__
++
++#include "yaffs_guts.h"
++
++/* Function to manipulate block info */
++static Y_INLINE yaffs_BlockInfo *yaffs_GetBlockInfo(yaffs_Device * dev, int blk)
++{
++	if (blk < dev->internalStartBlock || blk > dev->internalEndBlock) {
++		T(YAFFS_TRACE_ERROR,
++		  (TSTR
++		   ("**>> yaffs: getBlockInfo block %d is not valid" TENDSTR),
++		   blk));
++		YBUG();
++	}
++	return &dev->blockInfo[blk - dev->internalStartBlock];
++}
++
++#endif
+--- a/fs/yaffs2/yaffs_guts.c
++++ b/fs/yaffs2/yaffs_guts.c
+@@ -12,16 +12,17 @@
+  */
+ 
+ const char *yaffs_guts_c_version =
+-    "$Id: yaffs_guts.c,v 1.49 2007-05-15 20:07:40 charles Exp $";
++    "$Id: yaffs_guts.c,v 1.82 2009-03-09 04:24:17 charles Exp $";
+ 
+ #include "yportenv.h"
+ 
+ #include "yaffsinterface.h"
+ #include "yaffs_guts.h"
+ #include "yaffs_tagsvalidity.h"
++#include "yaffs_getblockinfo.h"
+ 
+ #include "yaffs_tagscompat.h"
+-#ifndef  CONFIG_YAFFS_USE_OWN_SORT
++#ifndef CONFIG_YAFFS_USE_OWN_SORT
+ #include "yaffs_qsort.h"
+ #endif
+ #include "yaffs_nand.h"
+@@ -32,116 +33,116 @@ const char *yaffs_guts_c_version =
+ #include "yaffs_packedtags2.h"
+ 
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-void yfsd_LockYAFFS(BOOL fsLockOnly);
+-void yfsd_UnlockYAFFS(BOOL fsLockOnly);
+-#endif
+-
+ #define YAFFS_PASSIVE_GC_CHUNKS 2
+ 
+ #include "yaffs_ecc.h"
+ 
+ 
+ /* Robustification (if it ever comes about...) */
+-static void yaffs_RetireBlock(yaffs_Device * dev, int blockInNAND);
+-static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND, int erasedOk);
+-static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+-				     const __u8 * data,
+-				     const yaffs_ExtendedTags * tags);
+-static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+-				    const yaffs_ExtendedTags * tags);
++static void yaffs_RetireBlock(yaffs_Device *dev, int blockInNAND);
++static void yaffs_HandleWriteChunkError(yaffs_Device *dev, int chunkInNAND,
++		int erasedOk);
++static void yaffs_HandleWriteChunkOk(yaffs_Device *dev, int chunkInNAND,
++				const __u8 *data,
++				const yaffs_ExtendedTags *tags);
++static void yaffs_HandleUpdateChunk(yaffs_Device *dev, int chunkInNAND,
++				const yaffs_ExtendedTags *tags);
+ 
+ /* Other local prototypes */
+-static int yaffs_UnlinkObject( yaffs_Object *obj);
++static int yaffs_UnlinkObject(yaffs_Object *obj);
+ static int yaffs_ObjectHasCachedWriteData(yaffs_Object *obj);
+ 
+ static void yaffs_HardlinkFixup(yaffs_Device *dev, yaffs_Object *hardList);
+ 
+-static int yaffs_WriteNewChunkWithTagsToNAND(yaffs_Device * dev,
+-					     const __u8 * buffer,
+-					     yaffs_ExtendedTags * tags,
+-					     int useReserve);
+-static int yaffs_PutChunkIntoFile(yaffs_Object * in, int chunkInInode,
+-				  int chunkInNAND, int inScan);
+-
+-static yaffs_Object *yaffs_CreateNewObject(yaffs_Device * dev, int number,
+-					   yaffs_ObjectType type);
+-static void yaffs_AddObjectToDirectory(yaffs_Object * directory,
+-				       yaffs_Object * obj);
+-static int yaffs_UpdateObjectHeader(yaffs_Object * in, const YCHAR * name,
+-				    int force, int isShrink, int shadows);
+-static void yaffs_RemoveObjectFromDirectory(yaffs_Object * obj);
++static int yaffs_WriteNewChunkWithTagsToNAND(yaffs_Device *dev,
++					const __u8 *buffer,
++					yaffs_ExtendedTags *tags,
++					int useReserve);
++static int yaffs_PutChunkIntoFile(yaffs_Object *in, int chunkInInode,
++				int chunkInNAND, int inScan);
++
++static yaffs_Object *yaffs_CreateNewObject(yaffs_Device *dev, int number,
++					yaffs_ObjectType type);
++static void yaffs_AddObjectToDirectory(yaffs_Object *directory,
++				yaffs_Object *obj);
++static int yaffs_UpdateObjectHeader(yaffs_Object *in, const YCHAR *name,
++				int force, int isShrink, int shadows);
++static void yaffs_RemoveObjectFromDirectory(yaffs_Object *obj);
+ static int yaffs_CheckStructures(void);
+-static int yaffs_DeleteWorker(yaffs_Object * in, yaffs_Tnode * tn, __u32 level,
+-			      int chunkOffset, int *limit);
+-static int yaffs_DoGenericObjectDeletion(yaffs_Object * in);
+-
+-static yaffs_BlockInfo *yaffs_GetBlockInfo(yaffs_Device * dev, int blockNo);
+-
+-static __u8 *yaffs_GetTempBuffer(yaffs_Device * dev, int lineNo);
+-static void yaffs_ReleaseTempBuffer(yaffs_Device * dev, __u8 * buffer,
+-				    int lineNo);
++static int yaffs_DeleteWorker(yaffs_Object *in, yaffs_Tnode *tn, __u32 level,
++			int chunkOffset, int *limit);
++static int yaffs_DoGenericObjectDeletion(yaffs_Object *in);
++
++static yaffs_BlockInfo *yaffs_GetBlockInfo(yaffs_Device *dev, int blockNo);
+ 
+-static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev,
+-				  int chunkInNAND);
+ 
+-static int yaffs_UnlinkWorker(yaffs_Object * obj);
+-static void yaffs_DestroyObject(yaffs_Object * obj);
++static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev,
++				int chunkInNAND);
+ 
+-static int yaffs_TagsMatch(const yaffs_ExtendedTags * tags, int objectId,
+-			   int chunkInObject);
++static int yaffs_UnlinkWorker(yaffs_Object *obj);
+ 
+-loff_t yaffs_GetFileSize(yaffs_Object * obj);
++static int yaffs_TagsMatch(const yaffs_ExtendedTags *tags, int objectId,
++			int chunkInObject);
+ 
+-static int yaffs_AllocateChunk(yaffs_Device * dev, int useReserve, yaffs_BlockInfo **blockUsedPtr);
++static int yaffs_AllocateChunk(yaffs_Device *dev, int useReserve,
++				yaffs_BlockInfo **blockUsedPtr);
+ 
+-static void yaffs_VerifyFreeChunks(yaffs_Device * dev);
++static void yaffs_VerifyFreeChunks(yaffs_Device *dev);
+ 
+ static void yaffs_CheckObjectDetailsLoaded(yaffs_Object *in);
+ 
++static void yaffs_VerifyDirectory(yaffs_Object *directory);
+ #ifdef YAFFS_PARANOID
+-static int yaffs_CheckFileSanity(yaffs_Object * in);
++static int yaffs_CheckFileSanity(yaffs_Object *in);
+ #else
+ #define yaffs_CheckFileSanity(in)
+ #endif
+ 
+-static void yaffs_InvalidateWholeChunkCache(yaffs_Object * in);
+-static void yaffs_InvalidateChunkCache(yaffs_Object * object, int chunkId);
++static void yaffs_InvalidateWholeChunkCache(yaffs_Object *in);
++static void yaffs_InvalidateChunkCache(yaffs_Object *object, int chunkId);
+ 
+ static void yaffs_InvalidateCheckpoint(yaffs_Device *dev);
+ 
+-static int yaffs_FindChunkInFile(yaffs_Object * in, int chunkInInode,
+-				 yaffs_ExtendedTags * tags);
++static int yaffs_FindChunkInFile(yaffs_Object *in, int chunkInInode,
++				yaffs_ExtendedTags *tags);
+ 
+-static __u32 yaffs_GetChunkGroupBase(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos);
+-static yaffs_Tnode *yaffs_FindLevel0Tnode(yaffs_Device * dev,
+-					  yaffs_FileStructure * fStruct,
+-					  __u32 chunkId);
++static __u32 yaffs_GetChunkGroupBase(yaffs_Device *dev, yaffs_Tnode *tn,
++		unsigned pos);
++static yaffs_Tnode *yaffs_FindLevel0Tnode(yaffs_Device *dev,
++					yaffs_FileStructure *fStruct,
++					__u32 chunkId);
+ 
+ 
+ /* Function to calculate chunk and offset */
+ 
+-static void yaffs_AddrToChunk(yaffs_Device *dev, loff_t addr, __u32 *chunk, __u32 *offset)
++static void yaffs_AddrToChunk(yaffs_Device *dev, loff_t addr, int *chunkOut,
++		__u32 *offsetOut)
+ {
+-	if(dev->chunkShift){
+-		/* Easy-peasy power of 2 case */
+-		*chunk  = (__u32)(addr >> dev->chunkShift);
+-		*offset = (__u32)(addr & dev->chunkMask);
+-	}
+-	else if(dev->crumbsPerChunk)
+-	{
+-		/* Case where we're using "crumbs" */
+-		*offset = (__u32)(addr & dev->crumbMask);
+-		addr >>= dev->crumbShift;
+-		*chunk = ((__u32)addr)/dev->crumbsPerChunk;
+-		*offset += ((addr - (*chunk * dev->crumbsPerChunk)) << dev->crumbShift);
++	int chunk;
++	__u32 offset;
++
++	chunk  = (__u32)(addr >> dev->chunkShift);
++
++	if (dev->chunkDiv == 1) {
++		/* easy power of 2 case */
++		offset = (__u32)(addr & dev->chunkMask);
++	} else {
++		/* Non power-of-2 case */
++
++		loff_t chunkBase;
++
++		chunk /= dev->chunkDiv;
++
++		chunkBase = ((loff_t)chunk) * dev->nDataBytesPerChunk;
++		offset = (__u32)(addr - chunkBase);
+ 	}
+-	else
+-		YBUG();
++
++	*chunkOut = chunk;
++	*offsetOut = offset;
+ }
+ 
+-/* Function to return the number of shifts for a power of 2 greater than or equal
+- * to the given number
++/* Function to return the number of shifts for a power of 2 greater than or
++ * equal to the given number
+  * Note we don't try to cater for all possible numbers and this does not have to
+  * be hellishly efficient.
+  */
+@@ -153,13 +154,14 @@ static __u32 ShiftsGE(__u32 x)
+ 
+ 	nShifts = extraBits = 0;
+ 
+-	while(x>1){
+-		if(x & 1) extraBits++;
+-		x>>=1;
++	while (x > 1) {
++		if (x & 1)
++			extraBits++;
++		x >>= 1;
+ 		nShifts++;
+ 	}
+ 
+-	if(extraBits)
++	if (extraBits)
+ 		nShifts++;
+ 
+ 	return nShifts;
+@@ -168,16 +170,17 @@ static __u32 ShiftsGE(__u32 x)
+ /* Function to return the number of shifts to get a 1 in bit 0
+  */
+ 
+-static __u32 ShiftDiv(__u32 x)
++static __u32 Shifts(__u32 x)
+ {
+ 	int nShifts;
+ 
+ 	nShifts =  0;
+ 
+-	if(!x) return 0;
++	if (!x)
++		return 0;
+ 
+-	while( !(x&1)){
+-		x>>=1;
++	while (!(x&1)) {
++		x >>= 1;
+ 		nShifts++;
+ 	}
+ 
+@@ -195,21 +198,25 @@ static int yaffs_InitialiseTempBuffers(y
+ 	int i;
+ 	__u8 *buf = (__u8 *)1;
+ 
+-	memset(dev->tempBuffer,0,sizeof(dev->tempBuffer));
++	memset(dev->tempBuffer, 0, sizeof(dev->tempBuffer));
+ 
+ 	for (i = 0; buf && i < YAFFS_N_TEMP_BUFFERS; i++) {
+ 		dev->tempBuffer[i].line = 0;	/* not in use */
+ 		dev->tempBuffer[i].buffer = buf =
+-		    YMALLOC_DMA(dev->nDataBytesPerChunk);
++		    YMALLOC_DMA(dev->totalBytesPerChunk);
+ 	}
+ 
+ 	return buf ? YAFFS_OK : YAFFS_FAIL;
+-
+ }
+ 
+-static __u8 *yaffs_GetTempBuffer(yaffs_Device * dev, int lineNo)
++__u8 *yaffs_GetTempBuffer(yaffs_Device *dev, int lineNo)
+ {
+ 	int i, j;
++
++	dev->tempInUse++;
++	if (dev->tempInUse > dev->maxTemp)
++		dev->maxTemp = dev->tempInUse;
++
+ 	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
+ 		if (dev->tempBuffer[i].line == 0) {
+ 			dev->tempBuffer[i].line = lineNo;
+@@ -227,9 +234,9 @@ static __u8 *yaffs_GetTempBuffer(yaffs_D
+ 	T(YAFFS_TRACE_BUFFERS,
+ 	  (TSTR("Out of temp buffers at line %d, other held by lines:"),
+ 	   lineNo));
+-	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
++	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++)
+ 		T(YAFFS_TRACE_BUFFERS, (TSTR(" %d "), dev->tempBuffer[i].line));
+-	}
++
+ 	T(YAFFS_TRACE_BUFFERS, (TSTR(" " TENDSTR)));
+ 
+ 	/*
+@@ -242,10 +249,13 @@ static __u8 *yaffs_GetTempBuffer(yaffs_D
+ 
+ }
+ 
+-static void yaffs_ReleaseTempBuffer(yaffs_Device * dev, __u8 * buffer,
++void yaffs_ReleaseTempBuffer(yaffs_Device *dev, __u8 *buffer,
+ 				    int lineNo)
+ {
+ 	int i;
++
++	dev->tempInUse--;
++
+ 	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
+ 		if (dev->tempBuffer[i].buffer == buffer) {
+ 			dev->tempBuffer[i].line = 0;
+@@ -267,27 +277,26 @@ static void yaffs_ReleaseTempBuffer(yaff
+ /*
+  * Determine if we have a managed buffer.
+  */
+-int yaffs_IsManagedTempBuffer(yaffs_Device * dev, const __u8 * buffer)
++int yaffs_IsManagedTempBuffer(yaffs_Device *dev, const __u8 *buffer)
+ {
+ 	int i;
++
+ 	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
+ 		if (dev->tempBuffer[i].buffer == buffer)
+ 			return 1;
++	}
+ 
++	for (i = 0; i < dev->nShortOpCaches; i++) {
++		if (dev->srCache[i].data == buffer)
++			return 1;
+ 	}
+ 
+-    for (i = 0; i < dev->nShortOpCaches; i++) {
+-        if( dev->srCache[i].data == buffer )
+-            return 1;
+-
+-    }
+-
+-    if (buffer == dev->checkpointBuffer)
+-      return 1;
+-
+-    T(YAFFS_TRACE_ALWAYS,
+-	  (TSTR("yaffs: unmaged buffer detected.\n" TENDSTR)));
+-    return 0;
++	if (buffer == dev->checkpointBuffer)
++		return 1;
++
++	T(YAFFS_TRACE_ALWAYS,
++		(TSTR("yaffs: unmaged buffer detected.\n" TENDSTR)));
++	return 0;
+ }
+ 
+ 
+@@ -296,62 +305,63 @@ int yaffs_IsManagedTempBuffer(yaffs_Devi
+  * Chunk bitmap manipulations
+  */
+ 
+-static Y_INLINE __u8 *yaffs_BlockBits(yaffs_Device * dev, int blk)
++static Y_INLINE __u8 *yaffs_BlockBits(yaffs_Device *dev, int blk)
+ {
+ 	if (blk < dev->internalStartBlock || blk > dev->internalEndBlock) {
+ 		T(YAFFS_TRACE_ERROR,
+-		  (TSTR("**>> yaffs: BlockBits block %d is not valid" TENDSTR),
+-		   blk));
++			(TSTR("**>> yaffs: BlockBits block %d is not valid" TENDSTR),
++			blk));
+ 		YBUG();
+ 	}
+ 	return dev->chunkBits +
+-	    (dev->chunkBitmapStride * (blk - dev->internalStartBlock));
++		(dev->chunkBitmapStride * (blk - dev->internalStartBlock));
+ }
+ 
+ static Y_INLINE void yaffs_VerifyChunkBitId(yaffs_Device *dev, int blk, int chunk)
+ {
+-	if(blk < dev->internalStartBlock || blk > dev->internalEndBlock ||
+-	   chunk < 0 || chunk >= dev->nChunksPerBlock) {
+-	   T(YAFFS_TRACE_ERROR,
+-	    (TSTR("**>> yaffs: Chunk Id (%d:%d) invalid"TENDSTR),blk,chunk));
+-	    YBUG();
++	if (blk < dev->internalStartBlock || blk > dev->internalEndBlock ||
++			chunk < 0 || chunk >= dev->nChunksPerBlock) {
++		T(YAFFS_TRACE_ERROR,
++		(TSTR("**>> yaffs: Chunk Id (%d:%d) invalid"TENDSTR),
++			blk, chunk));
++		YBUG();
+ 	}
+ }
+ 
+-static Y_INLINE void yaffs_ClearChunkBits(yaffs_Device * dev, int blk)
++static Y_INLINE void yaffs_ClearChunkBits(yaffs_Device *dev, int blk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+ 
+ 	memset(blkBits, 0, dev->chunkBitmapStride);
+ }
+ 
+-static Y_INLINE void yaffs_ClearChunkBit(yaffs_Device * dev, int blk, int chunk)
++static Y_INLINE void yaffs_ClearChunkBit(yaffs_Device *dev, int blk, int chunk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+ 
+-	yaffs_VerifyChunkBitId(dev,blk,chunk);
++	yaffs_VerifyChunkBitId(dev, blk, chunk);
+ 
+ 	blkBits[chunk / 8] &= ~(1 << (chunk & 7));
+ }
+ 
+-static Y_INLINE void yaffs_SetChunkBit(yaffs_Device * dev, int blk, int chunk)
++static Y_INLINE void yaffs_SetChunkBit(yaffs_Device *dev, int blk, int chunk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+ 
+-	yaffs_VerifyChunkBitId(dev,blk,chunk);
++	yaffs_VerifyChunkBitId(dev, blk, chunk);
+ 
+ 	blkBits[chunk / 8] |= (1 << (chunk & 7));
+ }
+ 
+-static Y_INLINE int yaffs_CheckChunkBit(yaffs_Device * dev, int blk, int chunk)
++static Y_INLINE int yaffs_CheckChunkBit(yaffs_Device *dev, int blk, int chunk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+-	yaffs_VerifyChunkBitId(dev,blk,chunk);
++	yaffs_VerifyChunkBitId(dev, blk, chunk);
+ 
+ 	return (blkBits[chunk / 8] & (1 << (chunk & 7))) ? 1 : 0;
+ }
+ 
+-static Y_INLINE int yaffs_StillSomeChunkBits(yaffs_Device * dev, int blk)
++static Y_INLINE int yaffs_StillSomeChunkBits(yaffs_Device *dev, int blk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+ 	int i;
+@@ -363,17 +373,17 @@ static Y_INLINE int yaffs_StillSomeChunk
+ 	return 0;
+ }
+ 
+-static int yaffs_CountChunkBits(yaffs_Device * dev, int blk)
++static int yaffs_CountChunkBits(yaffs_Device *dev, int blk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+ 	int i;
+ 	int n = 0;
+ 	for (i = 0; i < dev->chunkBitmapStride; i++) {
+ 		__u8 x = *blkBits;
+-		while(x){
+-			if(x & 1)
++		while (x) {
++			if (x & 1)
+ 				n++;
+-			x >>=1;
++			x >>= 1;
+ 		}
+ 
+ 		blkBits++;
+@@ -400,7 +410,7 @@ static int yaffs_SkipNANDVerification(ya
+ 	return !(yaffs_traceMask & (YAFFS_TRACE_VERIFY_NAND));
+ }
+ 
+-static const char * blockStateName[] = {
++static const char *blockStateName[] = {
+ "Unknown",
+ "Needs scanning",
+ "Scanning",
+@@ -413,64 +423,65 @@ static const char * blockStateName[] = {
+ "Dead"
+ };
+ 
+-static void yaffs_VerifyBlock(yaffs_Device *dev,yaffs_BlockInfo *bi,int n)
++static void yaffs_VerifyBlock(yaffs_Device *dev, yaffs_BlockInfo *bi, int n)
+ {
+ 	int actuallyUsed;
+ 	int inUse;
+ 
+-	if(yaffs_SkipVerification(dev))
++	if (yaffs_SkipVerification(dev))
+ 		return;
+ 
+ 	/* Report illegal runtime states */
+-	if(bi->blockState <0 || bi->blockState >= YAFFS_NUMBER_OF_BLOCK_STATES)
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has undefined state %d"TENDSTR),n,bi->blockState));
++	if (bi->blockState >= YAFFS_NUMBER_OF_BLOCK_STATES)
++		T(YAFFS_TRACE_VERIFY, (TSTR("Block %d has undefined state %d"TENDSTR), n, bi->blockState));
+ 
+-	switch(bi->blockState){
+-	 case YAFFS_BLOCK_STATE_UNKNOWN:
+-	 case YAFFS_BLOCK_STATE_SCANNING:
+-	 case YAFFS_BLOCK_STATE_NEEDS_SCANNING:
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has bad run-state %s"TENDSTR),
+-		n,blockStateName[bi->blockState]));
++	switch (bi->blockState) {
++	case YAFFS_BLOCK_STATE_UNKNOWN:
++	case YAFFS_BLOCK_STATE_SCANNING:
++	case YAFFS_BLOCK_STATE_NEEDS_SCANNING:
++		T(YAFFS_TRACE_VERIFY, (TSTR("Block %d has bad run-state %s"TENDSTR),
++		n, blockStateName[bi->blockState]));
+ 	}
+ 
+ 	/* Check pages in use and soft deletions are legal */
+ 
+ 	actuallyUsed = bi->pagesInUse - bi->softDeletions;
+ 
+-	if(bi->pagesInUse < 0 || bi->pagesInUse > dev->nChunksPerBlock ||
++	if (bi->pagesInUse < 0 || bi->pagesInUse > dev->nChunksPerBlock ||
+ 	   bi->softDeletions < 0 || bi->softDeletions > dev->nChunksPerBlock ||
+ 	   actuallyUsed < 0 || actuallyUsed > dev->nChunksPerBlock)
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has illegal values pagesInUsed %d softDeletions %d"TENDSTR),
+-		n,bi->pagesInUse,bi->softDeletions));
++		T(YAFFS_TRACE_VERIFY, (TSTR("Block %d has illegal values pagesInUsed %d softDeletions %d"TENDSTR),
++		n, bi->pagesInUse, bi->softDeletions));
+ 
+ 
+ 	/* Check chunk bitmap legal */
+-	inUse = yaffs_CountChunkBits(dev,n);
+-	if(inUse != bi->pagesInUse)
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has inconsistent values pagesInUse %d counted chunk bits %d"TENDSTR),
+-			n,bi->pagesInUse,inUse));
++	inUse = yaffs_CountChunkBits(dev, n);
++	if (inUse != bi->pagesInUse)
++		T(YAFFS_TRACE_VERIFY, (TSTR("Block %d has inconsistent values pagesInUse %d counted chunk bits %d"TENDSTR),
++			n, bi->pagesInUse, inUse));
+ 
+ 	/* Check that the sequence number is valid.
+ 	 * Ten million is legal, but is very unlikely
+ 	 */
+-	if(dev->isYaffs2 &&
++	if (dev->isYaffs2 &&
+ 	   (bi->blockState == YAFFS_BLOCK_STATE_ALLOCATING || bi->blockState == YAFFS_BLOCK_STATE_FULL) &&
+-	   (bi->sequenceNumber < YAFFS_LOWEST_SEQUENCE_NUMBER || bi->sequenceNumber > 10000000 ))
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has suspect sequence number of %d"TENDSTR),
+-		n,bi->sequenceNumber));
+-
++	   (bi->sequenceNumber < YAFFS_LOWEST_SEQUENCE_NUMBER || bi->sequenceNumber > 10000000))
++		T(YAFFS_TRACE_VERIFY, (TSTR("Block %d has suspect sequence number of %d"TENDSTR),
++		n, bi->sequenceNumber));
+ }
+ 
+-static void yaffs_VerifyCollectedBlock(yaffs_Device *dev,yaffs_BlockInfo *bi,int n)
++static void yaffs_VerifyCollectedBlock(yaffs_Device *dev, yaffs_BlockInfo *bi,
++		int n)
+ {
+-	yaffs_VerifyBlock(dev,bi,n);
++	yaffs_VerifyBlock(dev, bi, n);
+ 
+ 	/* After collection the block should be in the erased state */
+-	/* TODO: This will need to change if we do partial gc */
++	/* This will need to change if we do partial gc */
+ 
+-	if(bi->blockState != YAFFS_BLOCK_STATE_EMPTY){
+-		T(YAFFS_TRACE_ERROR,(TSTR("Block %d is in state %d after gc, should be erased"TENDSTR),
+-			n,bi->blockState));
++	if (bi->blockState != YAFFS_BLOCK_STATE_COLLECTING &&
++			bi->blockState != YAFFS_BLOCK_STATE_EMPTY) {
++		T(YAFFS_TRACE_ERROR, (TSTR("Block %d is in state %d after gc, should be erased"TENDSTR),
++			n, bi->blockState));
+ 	}
+ }
+ 
+@@ -480,52 +491,49 @@ static void yaffs_VerifyBlocks(yaffs_Dev
+ 	int nBlocksPerState[YAFFS_NUMBER_OF_BLOCK_STATES];
+ 	int nIllegalBlockStates = 0;
+ 
+-
+-	if(yaffs_SkipVerification(dev))
++	if (yaffs_SkipVerification(dev))
+ 		return;
+ 
+-	memset(nBlocksPerState,0,sizeof(nBlocksPerState));
+-
++	memset(nBlocksPerState, 0, sizeof(nBlocksPerState));
+ 
+-	for(i = dev->internalStartBlock; i <= dev->internalEndBlock; i++){
+-		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,i);
+-		yaffs_VerifyBlock(dev,bi,i);
++	for (i = dev->internalStartBlock; i <= dev->internalEndBlock; i++) {
++		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, i);
++		yaffs_VerifyBlock(dev, bi, i);
+ 
+-		if(bi->blockState >=0 && bi->blockState < YAFFS_NUMBER_OF_BLOCK_STATES)
++		if (bi->blockState < YAFFS_NUMBER_OF_BLOCK_STATES)
+ 			nBlocksPerState[bi->blockState]++;
+ 		else
+ 			nIllegalBlockStates++;
+-
+ 	}
+ 
+-	T(YAFFS_TRACE_VERIFY,(TSTR(""TENDSTR)));
+-	T(YAFFS_TRACE_VERIFY,(TSTR("Block summary"TENDSTR)));
++	T(YAFFS_TRACE_VERIFY, (TSTR(""TENDSTR)));
++	T(YAFFS_TRACE_VERIFY, (TSTR("Block summary"TENDSTR)));
+ 
+-	T(YAFFS_TRACE_VERIFY,(TSTR("%d blocks have illegal states"TENDSTR),nIllegalBlockStates));
+-	if(nBlocksPerState[YAFFS_BLOCK_STATE_ALLOCATING] > 1)
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Too many allocating blocks"TENDSTR)));
++	T(YAFFS_TRACE_VERIFY, (TSTR("%d blocks have illegal states"TENDSTR), nIllegalBlockStates));
++	if (nBlocksPerState[YAFFS_BLOCK_STATE_ALLOCATING] > 1)
++		T(YAFFS_TRACE_VERIFY, (TSTR("Too many allocating blocks"TENDSTR)));
+ 
+-	for(i = 0; i < YAFFS_NUMBER_OF_BLOCK_STATES; i++)
++	for (i = 0; i < YAFFS_NUMBER_OF_BLOCK_STATES; i++)
+ 		T(YAFFS_TRACE_VERIFY,
+ 		  (TSTR("%s %d blocks"TENDSTR),
+-		  blockStateName[i],nBlocksPerState[i]));
++		  blockStateName[i], nBlocksPerState[i]));
+ 
+-	if(dev->blocksInCheckpoint != nBlocksPerState[YAFFS_BLOCK_STATE_CHECKPOINT])
++	if (dev->blocksInCheckpoint != nBlocksPerState[YAFFS_BLOCK_STATE_CHECKPOINT])
+ 		T(YAFFS_TRACE_VERIFY,
+ 		 (TSTR("Checkpoint block count wrong dev %d count %d"TENDSTR),
+ 		 dev->blocksInCheckpoint, nBlocksPerState[YAFFS_BLOCK_STATE_CHECKPOINT]));
+ 
+-	if(dev->nErasedBlocks != nBlocksPerState[YAFFS_BLOCK_STATE_EMPTY])
++	if (dev->nErasedBlocks != nBlocksPerState[YAFFS_BLOCK_STATE_EMPTY])
+ 		T(YAFFS_TRACE_VERIFY,
+ 		 (TSTR("Erased block count wrong dev %d count %d"TENDSTR),
+ 		 dev->nErasedBlocks, nBlocksPerState[YAFFS_BLOCK_STATE_EMPTY]));
+ 
+-	if(nBlocksPerState[YAFFS_BLOCK_STATE_COLLECTING] > 1)
++	if (nBlocksPerState[YAFFS_BLOCK_STATE_COLLECTING] > 1)
+ 		T(YAFFS_TRACE_VERIFY,
+ 		 (TSTR("Too many collecting blocks %d (max is 1)"TENDSTR),
+ 		 nBlocksPerState[YAFFS_BLOCK_STATE_COLLECTING]));
+ 
+-	T(YAFFS_TRACE_VERIFY,(TSTR(""TENDSTR)));
++	T(YAFFS_TRACE_VERIFY, (TSTR(""TENDSTR)));
+ 
+ }
+ 
+@@ -535,26 +543,26 @@ static void yaffs_VerifyBlocks(yaffs_Dev
+  */
+ static void yaffs_VerifyObjectHeader(yaffs_Object *obj, yaffs_ObjectHeader *oh, yaffs_ExtendedTags *tags, int parentCheck)
+ {
+-	if(yaffs_SkipVerification(obj->myDev))
++	if (obj && yaffs_SkipVerification(obj->myDev))
+ 		return;
+ 
+-	if(!(tags && obj && oh)){
+-	 	T(YAFFS_TRACE_VERIFY,
+-		 		(TSTR("Verifying object header tags %x obj %x oh %x"TENDSTR),
+-		 		(__u32)tags,(__u32)obj,(__u32)oh));
++	if (!(tags && obj && oh)) {
++		T(YAFFS_TRACE_VERIFY,
++				(TSTR("Verifying object header tags %x obj %x oh %x"TENDSTR),
++				(__u32)tags, (__u32)obj, (__u32)oh));
+ 		return;
+ 	}
+ 
+-	if(oh->type <= YAFFS_OBJECT_TYPE_UNKNOWN ||
+-	   oh->type > YAFFS_OBJECT_TYPE_MAX)
+-	 	T(YAFFS_TRACE_VERIFY,
+-		 (TSTR("Obj %d header type is illegal value 0x%x"TENDSTR),
+-		 tags->objectId, oh->type));
+-
+-	if(tags->objectId != obj->objectId)
+-	 	T(YAFFS_TRACE_VERIFY,
+-		 (TSTR("Obj %d header mismatch objectId %d"TENDSTR),
+-		 tags->objectId, obj->objectId));
++	if (oh->type <= YAFFS_OBJECT_TYPE_UNKNOWN ||
++			oh->type > YAFFS_OBJECT_TYPE_MAX)
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d header type is illegal value 0x%x"TENDSTR),
++			tags->objectId, oh->type));
++
++	if (tags->objectId != obj->objectId)
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d header mismatch objectId %d"TENDSTR),
++			tags->objectId, obj->objectId));
+ 
+ 
+ 	/*
+@@ -563,46 +571,43 @@ static void yaffs_VerifyObjectHeader(yaf
+ 	 * Tests do not apply to the root object.
+ 	 */
+ 
+-	if(parentCheck && tags->objectId > 1 && !obj->parent)
+-	 	T(YAFFS_TRACE_VERIFY,
+-		 (TSTR("Obj %d header mismatch parentId %d obj->parent is NULL"TENDSTR),
+-	 	 tags->objectId, oh->parentObjectId));
+-
+-
+-	if(parentCheck && obj->parent &&
+-	   oh->parentObjectId != obj->parent->objectId &&
+-	   (oh->parentObjectId != YAFFS_OBJECTID_UNLINKED ||
+-	    obj->parent->objectId != YAFFS_OBJECTID_DELETED))
+-	 	T(YAFFS_TRACE_VERIFY,
+-		 (TSTR("Obj %d header mismatch parentId %d parentObjectId %d"TENDSTR),
+-	 	 tags->objectId, oh->parentObjectId, obj->parent->objectId));
++	if (parentCheck && tags->objectId > 1 && !obj->parent)
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d header mismatch parentId %d obj->parent is NULL"TENDSTR),
++			tags->objectId, oh->parentObjectId));
+ 
++	if (parentCheck && obj->parent &&
++			oh->parentObjectId != obj->parent->objectId &&
++			(oh->parentObjectId != YAFFS_OBJECTID_UNLINKED ||
++			obj->parent->objectId != YAFFS_OBJECTID_DELETED))
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d header mismatch parentId %d parentObjectId %d"TENDSTR),
++			tags->objectId, oh->parentObjectId, obj->parent->objectId));
+ 
+-	if(tags->objectId > 1 && oh->name[0] == 0) /* Null name */
++	if (tags->objectId > 1 && oh->name[0] == 0) /* Null name */
+ 		T(YAFFS_TRACE_VERIFY,
+-		(TSTR("Obj %d header name is NULL"TENDSTR),
+-		 obj->objectId));
++			(TSTR("Obj %d header name is NULL"TENDSTR),
++			obj->objectId));
+ 
+-	if(tags->objectId > 1 && ((__u8)(oh->name[0])) == 0xff) /* Trashed name */
++	if (tags->objectId > 1 && ((__u8)(oh->name[0])) == 0xff) /* Trashed name */
+ 		T(YAFFS_TRACE_VERIFY,
+-		(TSTR("Obj %d header name is 0xFF"TENDSTR),
+-		 obj->objectId));
++			(TSTR("Obj %d header name is 0xFF"TENDSTR),
++			obj->objectId));
+ }
+ 
+ 
+ 
+-static int yaffs_VerifyTnodeWorker(yaffs_Object * obj, yaffs_Tnode * tn,
+-				  	__u32 level, int chunkOffset)
++static int yaffs_VerifyTnodeWorker(yaffs_Object *obj, yaffs_Tnode *tn,
++					__u32 level, int chunkOffset)
+ {
+ 	int i;
+ 	yaffs_Device *dev = obj->myDev;
+ 	int ok = 1;
+-	int nTnodeBytes = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
+ 
+ 	if (tn) {
+ 		if (level > 0) {
+ 
+-			for (i = 0; i < YAFFS_NTNODES_INTERNAL && ok; i++){
++			for (i = 0; i < YAFFS_NTNODES_INTERNAL && ok; i++) {
+ 				if (tn->internal[i]) {
+ 					ok = yaffs_VerifyTnodeWorker(obj,
+ 							tn->internal[i],
+@@ -611,20 +616,19 @@ static int yaffs_VerifyTnodeWorker(yaffs
+ 				}
+ 			}
+ 		} else if (level == 0) {
+-			int i;
+ 			yaffs_ExtendedTags tags;
+ 			__u32 objectId = obj->objectId;
+ 
+ 			chunkOffset <<=  YAFFS_TNODES_LEVEL0_BITS;
+ 
+-			for(i = 0; i < YAFFS_NTNODES_LEVEL0; i++){
+-				__u32 theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
++			for (i = 0; i < YAFFS_NTNODES_LEVEL0; i++) {
++				__u32 theChunk = yaffs_GetChunkGroupBase(dev, tn, i);
+ 
+-				if(theChunk > 0){
++				if (theChunk > 0) {
+ 					/* T(~0,(TSTR("verifying (%d:%d) %d"TENDSTR),tags.objectId,tags.chunkId,theChunk)); */
+-					yaffs_ReadChunkWithTagsFromNAND(dev,theChunk,NULL, &tags);
+-					if(tags.objectId != objectId || tags.chunkId != chunkOffset){
+-						T(~0,(TSTR("Object %d chunkId %d NAND mismatch chunk %d tags (%d:%d)"TENDSTR),
++					yaffs_ReadChunkWithTagsFromNAND(dev, theChunk, NULL, &tags);
++					if (tags.objectId != objectId || tags.chunkId != chunkOffset) {
++						T(~0, (TSTR("Object %d chunkId %d NAND mismatch chunk %d tags (%d:%d)"TENDSTR),
+ 							objectId, chunkOffset, theChunk,
+ 							tags.objectId, tags.chunkId));
+ 					}
+@@ -646,13 +650,15 @@ static void yaffs_VerifyFile(yaffs_Objec
+ 	__u32 lastChunk;
+ 	__u32 x;
+ 	__u32 i;
+-	int ok;
+ 	yaffs_Device *dev;
+ 	yaffs_ExtendedTags tags;
+ 	yaffs_Tnode *tn;
+ 	__u32 objectId;
+ 
+-	if(obj && yaffs_SkipVerification(obj->myDev))
++	if (!obj)
++		return;
++
++	if (yaffs_SkipVerification(obj->myDev))
+ 		return;
+ 
+ 	dev = obj->myDev;
+@@ -662,17 +668,17 @@ static void yaffs_VerifyFile(yaffs_Objec
+ 	lastChunk =  obj->variant.fileVariant.fileSize / dev->nDataBytesPerChunk + 1;
+ 	x = lastChunk >> YAFFS_TNODES_LEVEL0_BITS;
+ 	requiredTallness = 0;
+-	while (x> 0) {
++	while (x > 0) {
+ 		x >>= YAFFS_TNODES_INTERNAL_BITS;
+ 		requiredTallness++;
+ 	}
+ 
+ 	actualTallness = obj->variant.fileVariant.topLevel;
+ 
+-	if(requiredTallness > actualTallness )
++	if (requiredTallness > actualTallness)
+ 		T(YAFFS_TRACE_VERIFY,
+ 		(TSTR("Obj %d had tnode tallness %d, needs to be %d"TENDSTR),
+-		 obj->objectId,actualTallness, requiredTallness));
++		 obj->objectId, actualTallness, requiredTallness));
+ 
+ 
+ 	/* Check that the chunks in the tnode tree are all correct.
+@@ -680,39 +686,31 @@ static void yaffs_VerifyFile(yaffs_Objec
+ 	 * checking the tags for every chunk match.
+ 	 */
+ 
+-	if(yaffs_SkipNANDVerification(dev))
++	if (yaffs_SkipNANDVerification(dev))
+ 		return;
+ 
+-	for(i = 1; i <= lastChunk; i++){
+-		tn = yaffs_FindLevel0Tnode(dev, &obj->variant.fileVariant,i);
++	for (i = 1; i <= lastChunk; i++) {
++		tn = yaffs_FindLevel0Tnode(dev, &obj->variant.fileVariant, i);
+ 
+ 		if (tn) {
+-			__u32 theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
+-			if(theChunk > 0){
++			__u32 theChunk = yaffs_GetChunkGroupBase(dev, tn, i);
++			if (theChunk > 0) {
+ 				/* T(~0,(TSTR("verifying (%d:%d) %d"TENDSTR),objectId,i,theChunk)); */
+-				yaffs_ReadChunkWithTagsFromNAND(dev,theChunk,NULL, &tags);
+-				if(tags.objectId != objectId || tags.chunkId != i){
+-					T(~0,(TSTR("Object %d chunkId %d NAND mismatch chunk %d tags (%d:%d)"TENDSTR),
++				yaffs_ReadChunkWithTagsFromNAND(dev, theChunk, NULL, &tags);
++				if (tags.objectId != objectId || tags.chunkId != i) {
++					T(~0, (TSTR("Object %d chunkId %d NAND mismatch chunk %d tags (%d:%d)"TENDSTR),
+ 						objectId, i, theChunk,
+ 						tags.objectId, tags.chunkId));
+ 				}
+ 			}
+ 		}
+-
+ 	}
+-
+ }
+ 
+-static void yaffs_VerifyDirectory(yaffs_Object *obj)
+-{
+-	if(obj && yaffs_SkipVerification(obj->myDev))
+-		return;
+-
+-}
+ 
+ static void yaffs_VerifyHardLink(yaffs_Object *obj)
+ {
+-	if(obj && yaffs_SkipVerification(obj->myDev))
++	if (obj && yaffs_SkipVerification(obj->myDev))
+ 		return;
+ 
+ 	/* Verify sane equivalent object */
+@@ -720,7 +718,7 @@ static void yaffs_VerifyHardLink(yaffs_O
+ 
+ static void yaffs_VerifySymlink(yaffs_Object *obj)
+ {
+-	if(obj && yaffs_SkipVerification(obj->myDev))
++	if (obj && yaffs_SkipVerification(obj->myDev))
+ 		return;
+ 
+ 	/* Verify symlink string */
+@@ -728,7 +726,7 @@ static void yaffs_VerifySymlink(yaffs_Ob
+ 
+ static void yaffs_VerifySpecial(yaffs_Object *obj)
+ {
+-	if(obj && yaffs_SkipVerification(obj->myDev))
++	if (obj && yaffs_SkipVerification(obj->myDev))
+ 		return;
+ }
+ 
+@@ -740,14 +738,19 @@ static void yaffs_VerifyObject(yaffs_Obj
+ 	__u32 chunkMax;
+ 
+ 	__u32 chunkIdOk;
+-	__u32 chunkIsLive;
++	__u32 chunkInRange;
++	__u32 chunkShouldNotBeDeleted;
++	__u32 chunkValid;
++
++	if (!obj)
++		return;
+ 
+-	if(!obj)
++	if (obj->beingCreated)
+ 		return;
+ 
+ 	dev = obj->myDev;
+ 
+-	if(yaffs_SkipVerification(dev))
++	if (yaffs_SkipVerification(dev))
+ 		return;
+ 
+ 	/* Check sane object header chunk */
+@@ -755,50 +758,54 @@ static void yaffs_VerifyObject(yaffs_Obj
+ 	chunkMin = dev->internalStartBlock * dev->nChunksPerBlock;
+ 	chunkMax = (dev->internalEndBlock+1) * dev->nChunksPerBlock - 1;
+ 
+-	chunkIdOk = (obj->chunkId >= chunkMin && obj->chunkId <= chunkMax);
+-	chunkIsLive = chunkIdOk &&
++	chunkInRange = (((unsigned)(obj->hdrChunk)) >= chunkMin && ((unsigned)(obj->hdrChunk)) <= chunkMax);
++	chunkIdOk = chunkInRange || obj->hdrChunk == 0;
++	chunkValid = chunkInRange &&
+ 			yaffs_CheckChunkBit(dev,
+-					    obj->chunkId / dev->nChunksPerBlock,
+-					    obj->chunkId % dev->nChunksPerBlock);
+-	if(!obj->fake &&
+-	    (!chunkIdOk || !chunkIsLive)) {
+-	   T(YAFFS_TRACE_VERIFY,
+-	   (TSTR("Obj %d has chunkId %d %s %s"TENDSTR),
+-	   obj->objectId,obj->chunkId,
+-	   chunkIdOk ? "" : ",out of range",
+-	   chunkIsLive || !chunkIdOk ? "" : ",marked as deleted"));
++					obj->hdrChunk / dev->nChunksPerBlock,
++					obj->hdrChunk % dev->nChunksPerBlock);
++	chunkShouldNotBeDeleted = chunkInRange && !chunkValid;
++
++	if (!obj->fake &&
++			(!chunkIdOk || chunkShouldNotBeDeleted)) {
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d has chunkId %d %s %s"TENDSTR),
++			obj->objectId, obj->hdrChunk,
++			chunkIdOk ? "" : ",out of range",
++			chunkShouldNotBeDeleted ? ",marked as deleted" : ""));
+ 	}
+ 
+-	if(chunkIdOk && chunkIsLive &&!yaffs_SkipNANDVerification(dev)) {
++	if (chunkValid && !yaffs_SkipNANDVerification(dev)) {
+ 		yaffs_ExtendedTags tags;
+ 		yaffs_ObjectHeader *oh;
+-		__u8 *buffer = yaffs_GetTempBuffer(dev,__LINE__);
++		__u8 *buffer = yaffs_GetTempBuffer(dev, __LINE__);
+ 
+ 		oh = (yaffs_ObjectHeader *)buffer;
+ 
+-		yaffs_ReadChunkWithTagsFromNAND(dev, obj->chunkId,buffer, &tags);
++		yaffs_ReadChunkWithTagsFromNAND(dev, obj->hdrChunk, buffer,
++				&tags);
+ 
+-		yaffs_VerifyObjectHeader(obj,oh,&tags,1);
++		yaffs_VerifyObjectHeader(obj, oh, &tags, 1);
+ 
+-		yaffs_ReleaseTempBuffer(dev,buffer,__LINE__);
++		yaffs_ReleaseTempBuffer(dev, buffer, __LINE__);
+ 	}
+ 
+ 	/* Verify it has a parent */
+-	if(obj && !obj->fake &&
+-	   (!obj->parent || obj->parent->myDev != dev)){
+-	   T(YAFFS_TRACE_VERIFY,
+-	   (TSTR("Obj %d has parent pointer %p which does not look like an object"TENDSTR),
+-	   obj->objectId,obj->parent));
++	if (obj && !obj->fake &&
++			(!obj->parent || obj->parent->myDev != dev)) {
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d has parent pointer %p which does not look like an object"TENDSTR),
++			obj->objectId, obj->parent));
+ 	}
+ 
+ 	/* Verify parent is a directory */
+-	if(obj->parent && obj->parent->variantType != YAFFS_OBJECT_TYPE_DIRECTORY){
+-	   T(YAFFS_TRACE_VERIFY,
+-	   (TSTR("Obj %d's parent is not a directory (type %d)"TENDSTR),
+-	   obj->objectId,obj->parent->variantType));
++	if (obj->parent && obj->parent->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d's parent is not a directory (type %d)"TENDSTR),
++			obj->objectId, obj->parent->variantType));
+ 	}
+ 
+-	switch(obj->variantType){
++	switch (obj->variantType) {
+ 	case YAFFS_OBJECT_TYPE_FILE:
+ 		yaffs_VerifyFile(obj);
+ 		break;
+@@ -818,33 +825,30 @@ static void yaffs_VerifyObject(yaffs_Obj
+ 	default:
+ 		T(YAFFS_TRACE_VERIFY,
+ 		(TSTR("Obj %d has illegaltype %d"TENDSTR),
+-		obj->objectId,obj->variantType));
++		obj->objectId, obj->variantType));
+ 		break;
+ 	}
+-
+-
+ }
+ 
+ static void yaffs_VerifyObjects(yaffs_Device *dev)
+ {
+ 	yaffs_Object *obj;
+ 	int i;
+-	struct list_head *lh;
++	struct ylist_head *lh;
+ 
+-	if(yaffs_SkipVerification(dev))
++	if (yaffs_SkipVerification(dev))
+ 		return;
+ 
+ 	/* Iterate through the objects in each hash entry */
+ 
+-	 for(i = 0; i <  YAFFS_NOBJECT_BUCKETS; i++){
+-	 	list_for_each(lh, &dev->objectBucket[i].list) {
++	for (i = 0; i <  YAFFS_NOBJECT_BUCKETS; i++) {
++		ylist_for_each(lh, &dev->objectBucket[i].list) {
+ 			if (lh) {
+-				obj = list_entry(lh, yaffs_Object, hashLink);
++				obj = ylist_entry(lh, yaffs_Object, hashLink);
+ 				yaffs_VerifyObject(obj);
+ 			}
+ 		}
+-	 }
+-
++	}
+ }
+ 
+ 
+@@ -855,19 +859,20 @@ static void yaffs_VerifyObjects(yaffs_De
+ static Y_INLINE int yaffs_HashFunction(int n)
+ {
+ 	n = abs(n);
+-	return (n % YAFFS_NOBJECT_BUCKETS);
++	return n % YAFFS_NOBJECT_BUCKETS;
+ }
+ 
+ /*
+- * Access functions to useful fake objects
++ * Access functions to useful fake objects.
++ * Note that root might have a presence in NAND if permissions are set.
+  */
+ 
+-yaffs_Object *yaffs_Root(yaffs_Device * dev)
++yaffs_Object *yaffs_Root(yaffs_Device *dev)
+ {
+ 	return dev->rootDir;
+ }
+ 
+-yaffs_Object *yaffs_LostNFound(yaffs_Device * dev)
++yaffs_Object *yaffs_LostNFound(yaffs_Device *dev)
+ {
+ 	return dev->lostNFoundDir;
+ }
+@@ -877,7 +882,7 @@ yaffs_Object *yaffs_LostNFound(yaffs_Dev
+  *  Erased NAND checking functions
+  */
+ 
+-int yaffs_CheckFF(__u8 * buffer, int nBytes)
++int yaffs_CheckFF(__u8 *buffer, int nBytes)
+ {
+ 	/* Horrible, slow implementation */
+ 	while (nBytes--) {
+@@ -889,9 +894,8 @@ int yaffs_CheckFF(__u8 * buffer, int nBy
+ }
+ 
+ static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev,
+-				  int chunkInNAND)
++				int chunkInNAND)
+ {
+-
+ 	int retval = YAFFS_OK;
+ 	__u8 *data = yaffs_GetTempBuffer(dev, __LINE__);
+ 	yaffs_ExtendedTags tags;
+@@ -899,10 +903,9 @@ static int yaffs_CheckChunkErased(struct
+ 
+ 	result = yaffs_ReadChunkWithTagsFromNAND(dev, chunkInNAND, data, &tags);
+ 
+-	if(tags.eccResult > YAFFS_ECC_RESULT_NO_ERROR)
++	if (tags.eccResult > YAFFS_ECC_RESULT_NO_ERROR)
+ 		retval = YAFFS_FAIL;
+ 
+-
+ 	if (!yaffs_CheckFF(data, dev->nDataBytesPerChunk) || tags.chunkUsed) {
+ 		T(YAFFS_TRACE_NANDACCESS,
+ 		  (TSTR("Chunk %d not erased" TENDSTR), chunkInNAND));
+@@ -915,11 +918,10 @@ static int yaffs_CheckChunkErased(struct
+ 
+ }
+ 
+-
+ static int yaffs_WriteNewChunkWithTagsToNAND(struct yaffs_DeviceStruct *dev,
+-					     const __u8 * data,
+-					     yaffs_ExtendedTags * tags,
+-					     int useReserve)
++					const __u8 *data,
++					yaffs_ExtendedTags *tags,
++					int useReserve)
+ {
+ 	int attempts = 0;
+ 	int writeOk = 0;
+@@ -972,7 +974,7 @@ static int yaffs_WriteNewChunkWithTagsTo
+ 			erasedOk = yaffs_CheckChunkErased(dev, chunk);
+ 			if (erasedOk != YAFFS_OK) {
+ 				T(YAFFS_TRACE_ERROR,
+-				(TSTR ("**>> yaffs chunk %d was not erased"
++				(TSTR("**>> yaffs chunk %d was not erased"
+ 				TENDSTR), chunk));
+ 
+ 				/* try another chunk */
+@@ -992,7 +994,11 @@ static int yaffs_WriteNewChunkWithTagsTo
+ 		/* Copy the data into the robustification buffer */
+ 		yaffs_HandleWriteChunkOk(dev, chunk, data, tags);
+ 
+-	} while (writeOk != YAFFS_OK && attempts < yaffs_wr_attempts);
++	} while (writeOk != YAFFS_OK &&
++		(yaffs_wr_attempts <= 0 || attempts <= yaffs_wr_attempts));
++
++	if (!writeOk)
++		chunk = -1;
+ 
+ 	if (attempts > 1) {
+ 		T(YAFFS_TRACE_ERROR,
+@@ -1009,13 +1015,35 @@ static int yaffs_WriteNewChunkWithTagsTo
+  * Block retiring for handling a broken block.
+  */
+ 
+-static void yaffs_RetireBlock(yaffs_Device * dev, int blockInNAND)
++static void yaffs_RetireBlock(yaffs_Device *dev, int blockInNAND)
+ {
+ 	yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, blockInNAND);
+ 
+ 	yaffs_InvalidateCheckpoint(dev);
+ 
+-	yaffs_MarkBlockBad(dev, blockInNAND);
++	if (yaffs_MarkBlockBad(dev, blockInNAND) != YAFFS_OK) {
++		if (yaffs_EraseBlockInNAND(dev, blockInNAND) != YAFFS_OK) {
++			T(YAFFS_TRACE_ALWAYS, (TSTR(
++				"yaffs: Failed to mark bad and erase block %d"
++				TENDSTR), blockInNAND));
++		} else {
++			yaffs_ExtendedTags tags;
++			int chunkId = blockInNAND * dev->nChunksPerBlock;
++
++			__u8 *buffer = yaffs_GetTempBuffer(dev, __LINE__);
++
++			memset(buffer, 0xff, dev->nDataBytesPerChunk);
++			yaffs_InitialiseTags(&tags);
++			tags.sequenceNumber = YAFFS_SEQUENCE_BAD_BLOCK;
++			if (dev->writeChunkWithTagsToNAND(dev, chunkId -
++				dev->chunkOffset, buffer, &tags) != YAFFS_OK)
++				T(YAFFS_TRACE_ALWAYS, (TSTR("yaffs: Failed to "
++					TCONT("write bad block marker to block %d")
++					TENDSTR), blockInNAND));
++
++			yaffs_ReleaseTempBuffer(dev, buffer, __LINE__);
++		}
++	}
+ 
+ 	bi->blockState = YAFFS_BLOCK_STATE_DEAD;
+ 	bi->gcPrioritise = 0;
+@@ -1029,49 +1057,45 @@ static void yaffs_RetireBlock(yaffs_Devi
+  *
+  */
+ 
+-static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+-				     const __u8 * data,
+-				     const yaffs_ExtendedTags * tags)
++static void yaffs_HandleWriteChunkOk(yaffs_Device *dev, int chunkInNAND,
++				const __u8 *data,
++				const yaffs_ExtendedTags *tags)
+ {
+ }
+ 
+-static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+-				    const yaffs_ExtendedTags * tags)
++static void yaffs_HandleUpdateChunk(yaffs_Device *dev, int chunkInNAND,
++				const yaffs_ExtendedTags *tags)
+ {
+ }
+ 
+ void yaffs_HandleChunkError(yaffs_Device *dev, yaffs_BlockInfo *bi)
+ {
+-	if(!bi->gcPrioritise){
++	if (!bi->gcPrioritise) {
+ 		bi->gcPrioritise = 1;
+ 		dev->hasPendingPrioritisedGCs = 1;
+-		bi->chunkErrorStrikes ++;
++		bi->chunkErrorStrikes++;
+ 
+-		if(bi->chunkErrorStrikes > 3){
++		if (bi->chunkErrorStrikes > 3) {
+ 			bi->needsRetiring = 1; /* Too many stikes, so retire this */
+ 			T(YAFFS_TRACE_ALWAYS, (TSTR("yaffs: Block struck out" TENDSTR)));
+ 
+ 		}
+-
+ 	}
+ }
+ 
+-static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND, int erasedOk)
++static void yaffs_HandleWriteChunkError(yaffs_Device *dev, int chunkInNAND,
++		int erasedOk)
+ {
+-
+ 	int blockInNAND = chunkInNAND / dev->nChunksPerBlock;
+ 	yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, blockInNAND);
+ 
+-	yaffs_HandleChunkError(dev,bi);
++	yaffs_HandleChunkError(dev, bi);
+ 
+-
+-	if(erasedOk ) {
++	if (erasedOk) {
+ 		/* Was an actual write failure, so mark the block for retirement  */
+ 		bi->needsRetiring = 1;
+ 		T(YAFFS_TRACE_ERROR | YAFFS_TRACE_BAD_BLOCKS,
+ 		  (TSTR("**>> Block %d needs retiring" TENDSTR), blockInNAND));
+-
+-
+ 	}
+ 
+ 	/* Delete the chunk */
+@@ -1081,12 +1105,12 @@ static void yaffs_HandleWriteChunkError(
+ 
+ /*---------------- Name handling functions ------------*/
+ 
+-static __u16 yaffs_CalcNameSum(const YCHAR * name)
++static __u16 yaffs_CalcNameSum(const YCHAR *name)
+ {
+ 	__u16 sum = 0;
+ 	__u16 i = 1;
+ 
+-	YUCHAR *bname = (YUCHAR *) name;
++	const YUCHAR *bname = (const YUCHAR *) name;
+ 	if (bname) {
+ 		while ((*bname) && (i < (YAFFS_MAX_NAME_LENGTH/2))) {
+ 
+@@ -1102,14 +1126,14 @@ static __u16 yaffs_CalcNameSum(const YCH
+ 	return sum;
+ }
+ 
+-static void yaffs_SetObjectName(yaffs_Object * obj, const YCHAR * name)
++static void yaffs_SetObjectName(yaffs_Object *obj, const YCHAR *name)
+ {
+ #ifdef CONFIG_YAFFS_SHORT_NAMES_IN_RAM
+-	if (name && yaffs_strlen(name) <= YAFFS_SHORT_NAME_LENGTH) {
++	memset(obj->shortName, 0, sizeof(YCHAR) * (YAFFS_SHORT_NAME_LENGTH+1));
++	if (name && yaffs_strlen(name) <= YAFFS_SHORT_NAME_LENGTH)
+ 		yaffs_strcpy(obj->shortName, name);
+-	} else {
++	else
+ 		obj->shortName[0] = _Y('\0');
+-	}
+ #endif
+ 	obj->sum = yaffs_CalcNameSum(name);
+ }
+@@ -1126,7 +1150,7 @@ static void yaffs_SetObjectName(yaffs_Ob
+  * Don't use this function directly
+  */
+ 
+-static int yaffs_CreateTnodes(yaffs_Device * dev, int nTnodes)
++static int yaffs_CreateTnodes(yaffs_Device *dev, int nTnodes)
+ {
+ 	int i;
+ 	int tnodeSize;
+@@ -1143,6 +1167,9 @@ static int yaffs_CreateTnodes(yaffs_Devi
+ 	 * Must be a multiple of 32-bits  */
+ 	tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
+ 
++	if (tnodeSize < sizeof(yaffs_Tnode))
++		tnodeSize = sizeof(yaffs_Tnode);
++
+ 	/* make these things */
+ 
+ 	newTnodes = YMALLOC(nTnodes * tnodeSize);
+@@ -1150,7 +1177,7 @@ static int yaffs_CreateTnodes(yaffs_Devi
+ 
+ 	if (!newTnodes) {
+ 		T(YAFFS_TRACE_ERROR,
+-		  (TSTR("yaffs: Could not allocate Tnodes" TENDSTR)));
++			(TSTR("yaffs: Could not allocate Tnodes" TENDSTR)));
+ 		return YAFFS_FAIL;
+ 	}
+ 
+@@ -1170,7 +1197,7 @@ static int yaffs_CreateTnodes(yaffs_Devi
+ 	dev->freeTnodes = newTnodes;
+ #else
+ 	/* New hookup for wide tnodes */
+-	for(i = 0; i < nTnodes -1; i++) {
++	for (i = 0; i < nTnodes - 1; i++) {
+ 		curr = (yaffs_Tnode *) &mem[i * tnodeSize];
+ 		next = (yaffs_Tnode *) &mem[(i+1) * tnodeSize];
+ 		curr->internal[0] = next;
+@@ -1197,7 +1224,6 @@ static int yaffs_CreateTnodes(yaffs_Devi
+ 		  (TSTR
+ 		   ("yaffs: Could not add tnodes to management list" TENDSTR)));
+ 		   return YAFFS_FAIL;
+-
+ 	} else {
+ 		tnl->tnodes = newTnodes;
+ 		tnl->next = dev->allocatedTnodeList;
+@@ -1211,14 +1237,13 @@ static int yaffs_CreateTnodes(yaffs_Devi
+ 
+ /* GetTnode gets us a clean tnode. Tries to make allocate more if we run out */
+ 
+-static yaffs_Tnode *yaffs_GetTnodeRaw(yaffs_Device * dev)
++static yaffs_Tnode *yaffs_GetTnodeRaw(yaffs_Device *dev)
+ {
+ 	yaffs_Tnode *tn = NULL;
+ 
+ 	/* If there are none left make more */
+-	if (!dev->freeTnodes) {
++	if (!dev->freeTnodes)
+ 		yaffs_CreateTnodes(dev, YAFFS_ALLOCATION_NTNODES);
+-	}
+ 
+ 	if (dev->freeTnodes) {
+ 		tn = dev->freeTnodes;
+@@ -1233,21 +1258,27 @@ static yaffs_Tnode *yaffs_GetTnodeRaw(ya
+ 		dev->nFreeTnodes--;
+ 	}
+ 
++	dev->nCheckpointBlocksRequired = 0; /* force recalculation*/
++
+ 	return tn;
+ }
+ 
+-static yaffs_Tnode *yaffs_GetTnode(yaffs_Device * dev)
++static yaffs_Tnode *yaffs_GetTnode(yaffs_Device *dev)
+ {
+ 	yaffs_Tnode *tn = yaffs_GetTnodeRaw(dev);
++	int tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
+ 
+-	if(tn)
+-		memset(tn, 0, (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8);
++	if (tnodeSize < sizeof(yaffs_Tnode))
++		tnodeSize = sizeof(yaffs_Tnode);
++
++	if (tn)
++		memset(tn, 0, tnodeSize);
+ 
+ 	return tn;
+ }
+ 
+ /* FreeTnode frees up a tnode and puts it back on the free list */
+-static void yaffs_FreeTnode(yaffs_Device * dev, yaffs_Tnode * tn)
++static void yaffs_FreeTnode(yaffs_Device *dev, yaffs_Tnode *tn)
+ {
+ 	if (tn) {
+ #ifdef CONFIG_YAFFS_TNODE_LIST_DEBUG
+@@ -1262,9 +1293,10 @@ static void yaffs_FreeTnode(yaffs_Device
+ 		dev->freeTnodes = tn;
+ 		dev->nFreeTnodes++;
+ 	}
++	dev->nCheckpointBlocksRequired = 0; /* force recalculation*/
+ }
+ 
+-static void yaffs_DeinitialiseTnodes(yaffs_Device * dev)
++static void yaffs_DeinitialiseTnodes(yaffs_Device *dev)
+ {
+ 	/* Free the list of allocated tnodes */
+ 	yaffs_TnodeList *tmp;
+@@ -1282,71 +1314,72 @@ static void yaffs_DeinitialiseTnodes(yaf
+ 	dev->nFreeTnodes = 0;
+ }
+ 
+-static void yaffs_InitialiseTnodes(yaffs_Device * dev)
++static void yaffs_InitialiseTnodes(yaffs_Device *dev)
+ {
+ 	dev->allocatedTnodeList = NULL;
+ 	dev->freeTnodes = NULL;
+ 	dev->nFreeTnodes = 0;
+ 	dev->nTnodesCreated = 0;
+-
+ }
+ 
+ 
+-void yaffs_PutLevel0Tnode(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos, unsigned val)
++void yaffs_PutLevel0Tnode(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos,
++		unsigned val)
+ {
+-  __u32 *map = (__u32 *)tn;
+-  __u32 bitInMap;
+-  __u32 bitInWord;
+-  __u32 wordInMap;
+-  __u32 mask;
++	__u32 *map = (__u32 *)tn;
++	__u32 bitInMap;
++	__u32 bitInWord;
++	__u32 wordInMap;
++	__u32 mask;
+ 
+-  pos &= YAFFS_TNODES_LEVEL0_MASK;
+-  val >>= dev->chunkGroupBits;
++	pos &= YAFFS_TNODES_LEVEL0_MASK;
++	val >>= dev->chunkGroupBits;
+ 
+-  bitInMap = pos * dev->tnodeWidth;
+-  wordInMap = bitInMap /32;
+-  bitInWord = bitInMap & (32 -1);
++	bitInMap = pos * dev->tnodeWidth;
++	wordInMap = bitInMap / 32;
++	bitInWord = bitInMap & (32 - 1);
+ 
+-  mask = dev->tnodeMask << bitInWord;
++	mask = dev->tnodeMask << bitInWord;
+ 
+-  map[wordInMap] &= ~mask;
+-  map[wordInMap] |= (mask & (val << bitInWord));
++	map[wordInMap] &= ~mask;
++	map[wordInMap] |= (mask & (val << bitInWord));
+ 
+-  if(dev->tnodeWidth > (32-bitInWord)) {
+-    bitInWord = (32 - bitInWord);
+-    wordInMap++;;
+-    mask = dev->tnodeMask >> (/*dev->tnodeWidth -*/ bitInWord);
+-    map[wordInMap] &= ~mask;
+-    map[wordInMap] |= (mask & (val >> bitInWord));
+-  }
++	if (dev->tnodeWidth > (32 - bitInWord)) {
++		bitInWord = (32 - bitInWord);
++		wordInMap++;;
++		mask = dev->tnodeMask >> (/*dev->tnodeWidth -*/ bitInWord);
++		map[wordInMap] &= ~mask;
++		map[wordInMap] |= (mask & (val >> bitInWord));
++	}
+ }
+ 
+-static __u32 yaffs_GetChunkGroupBase(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos)
++static __u32 yaffs_GetChunkGroupBase(yaffs_Device *dev, yaffs_Tnode *tn,
++		unsigned pos)
+ {
+-  __u32 *map = (__u32 *)tn;
+-  __u32 bitInMap;
+-  __u32 bitInWord;
+-  __u32 wordInMap;
+-  __u32 val;
++	__u32 *map = (__u32 *)tn;
++	__u32 bitInMap;
++	__u32 bitInWord;
++	__u32 wordInMap;
++	__u32 val;
+ 
+-  pos &= YAFFS_TNODES_LEVEL0_MASK;
++	pos &= YAFFS_TNODES_LEVEL0_MASK;
+ 
+-  bitInMap = pos * dev->tnodeWidth;
+-  wordInMap = bitInMap /32;
+-  bitInWord = bitInMap & (32 -1);
++	bitInMap = pos * dev->tnodeWidth;
++	wordInMap = bitInMap / 32;
++	bitInWord = bitInMap & (32 - 1);
+ 
+-  val = map[wordInMap] >> bitInWord;
++	val = map[wordInMap] >> bitInWord;
+ 
+-  if(dev->tnodeWidth > (32-bitInWord)) {
+-    bitInWord = (32 - bitInWord);
+-    wordInMap++;;
+-    val |= (map[wordInMap] << bitInWord);
+-  }
++	if	(dev->tnodeWidth > (32 - bitInWord)) {
++		bitInWord = (32 - bitInWord);
++		wordInMap++;;
++		val |= (map[wordInMap] << bitInWord);
++	}
+ 
+-  val &= dev->tnodeMask;
+-  val <<= dev->chunkGroupBits;
++	val &= dev->tnodeMask;
++	val <<= dev->chunkGroupBits;
+ 
+-  return val;
++	return val;
+ }
+ 
+ /* ------------------- End of individual tnode manipulation -----------------*/
+@@ -1357,24 +1390,21 @@ static __u32 yaffs_GetChunkGroupBase(yaf
+  */
+ 
+ /* FindLevel0Tnode finds the level 0 tnode, if one exists. */
+-static yaffs_Tnode *yaffs_FindLevel0Tnode(yaffs_Device * dev,
+-					  yaffs_FileStructure * fStruct,
+-					  __u32 chunkId)
++static yaffs_Tnode *yaffs_FindLevel0Tnode(yaffs_Device *dev,
++					yaffs_FileStructure *fStruct,
++					__u32 chunkId)
+ {
+-
+ 	yaffs_Tnode *tn = fStruct->top;
+ 	__u32 i;
+ 	int requiredTallness;
+ 	int level = fStruct->topLevel;
+ 
+ 	/* Check sane level and chunk Id */
+-	if (level < 0 || level > YAFFS_TNODES_MAX_LEVEL) {
++	if (level < 0 || level > YAFFS_TNODES_MAX_LEVEL)
+ 		return NULL;
+-	}
+ 
+-	if (chunkId > YAFFS_MAX_CHUNK_ID) {
++	if (chunkId > YAFFS_MAX_CHUNK_ID)
+ 		return NULL;
+-	}
+ 
+ 	/* First check we're tall enough (ie enough topLevel) */
+ 
+@@ -1385,22 +1415,17 @@ static yaffs_Tnode *yaffs_FindLevel0Tnod
+ 		requiredTallness++;
+ 	}
+ 
+-	if (requiredTallness > fStruct->topLevel) {
+-		/* Not tall enough, so we can't find it, return NULL. */
+-		return NULL;
+-	}
++	if (requiredTallness > fStruct->topLevel)
++		return NULL; /* Not tall enough, so we can't find it */
+ 
+ 	/* Traverse down to level 0 */
+ 	while (level > 0 && tn) {
+-		tn = tn->
+-		    internal[(chunkId >>
+-			       ( YAFFS_TNODES_LEVEL0_BITS +
+-			         (level - 1) *
+-			         YAFFS_TNODES_INTERNAL_BITS)
+-			      ) &
+-			     YAFFS_TNODES_INTERNAL_MASK];
++		tn = tn->internal[(chunkId >>
++			(YAFFS_TNODES_LEVEL0_BITS +
++				(level - 1) *
++				YAFFS_TNODES_INTERNAL_BITS)) &
++			YAFFS_TNODES_INTERNAL_MASK];
+ 		level--;
+-
+ 	}
+ 
+ 	return tn;
+@@ -1417,12 +1442,11 @@ static yaffs_Tnode *yaffs_FindLevel0Tnod
+  *  be plugged into the ttree.
+  */
+ 
+-static yaffs_Tnode *yaffs_AddOrFindLevel0Tnode(yaffs_Device * dev,
+-					       yaffs_FileStructure * fStruct,
+-					       __u32 chunkId,
+-					       yaffs_Tnode *passedTn)
++static yaffs_Tnode *yaffs_AddOrFindLevel0Tnode(yaffs_Device *dev,
++					yaffs_FileStructure *fStruct,
++					__u32 chunkId,
++					yaffs_Tnode *passedTn)
+ {
+-
+ 	int requiredTallness;
+ 	int i;
+ 	int l;
+@@ -1432,13 +1456,11 @@ static yaffs_Tnode *yaffs_AddOrFindLevel
+ 
+ 
+ 	/* Check sane level and page Id */
+-	if (fStruct->topLevel < 0 || fStruct->topLevel > YAFFS_TNODES_MAX_LEVEL) {
++	if (fStruct->topLevel < 0 || fStruct->topLevel > YAFFS_TNODES_MAX_LEVEL)
+ 		return NULL;
+-	}
+ 
+-	if (chunkId > YAFFS_MAX_CHUNK_ID) {
++	if (chunkId > YAFFS_MAX_CHUNK_ID)
+ 		return NULL;
+-	}
+ 
+ 	/* First check we're tall enough (ie enough topLevel) */
+ 
+@@ -1451,7 +1473,7 @@ static yaffs_Tnode *yaffs_AddOrFindLevel
+ 
+ 
+ 	if (requiredTallness > fStruct->topLevel) {
+-		/* Not tall enough,gotta make the tree taller */
++		/* Not tall enough, gotta make the tree taller */
+ 		for (i = fStruct->topLevel; i < requiredTallness; i++) {
+ 
+ 			tn = yaffs_GetTnode(dev);
+@@ -1473,27 +1495,27 @@ static yaffs_Tnode *yaffs_AddOrFindLevel
+ 	l = fStruct->topLevel;
+ 	tn = fStruct->top;
+ 
+-	if(l > 0) {
++	if (l > 0) {
+ 		while (l > 0 && tn) {
+ 			x = (chunkId >>
+-			     ( YAFFS_TNODES_LEVEL0_BITS +
++			     (YAFFS_TNODES_LEVEL0_BITS +
+ 			      (l - 1) * YAFFS_TNODES_INTERNAL_BITS)) &
+ 			    YAFFS_TNODES_INTERNAL_MASK;
+ 
+ 
+-			if((l>1) && !tn->internal[x]){
++			if ((l > 1) && !tn->internal[x]) {
+ 				/* Add missing non-level-zero tnode */
+ 				tn->internal[x] = yaffs_GetTnode(dev);
+ 
+-			} else if(l == 1) {
++			} else if (l == 1) {
+ 				/* Looking from level 1 at level 0 */
+-			 	if (passedTn) {
++				if (passedTn) {
+ 					/* If we already have one, then release it.*/
+-					if(tn->internal[x])
+-						yaffs_FreeTnode(dev,tn->internal[x]);
++					if (tn->internal[x])
++						yaffs_FreeTnode(dev, tn->internal[x]);
+ 					tn->internal[x] = passedTn;
+ 
+-				} else if(!tn->internal[x]) {
++				} else if (!tn->internal[x]) {
+ 					/* Don't have one, none passed in */
+ 					tn->internal[x] = yaffs_GetTnode(dev);
+ 				}
+@@ -1504,31 +1526,29 @@ static yaffs_Tnode *yaffs_AddOrFindLevel
+ 		}
+ 	} else {
+ 		/* top is level 0 */
+-		if(passedTn) {
+-			memcpy(tn,passedTn,(dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8);
+-			yaffs_FreeTnode(dev,passedTn);
++		if (passedTn) {
++			memcpy(tn, passedTn, (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8);
++			yaffs_FreeTnode(dev, passedTn);
+ 		}
+ 	}
+ 
+ 	return tn;
+ }
+ 
+-static int yaffs_FindChunkInGroup(yaffs_Device * dev, int theChunk,
+-				  yaffs_ExtendedTags * tags, int objectId,
+-				  int chunkInInode)
++static int yaffs_FindChunkInGroup(yaffs_Device *dev, int theChunk,
++				yaffs_ExtendedTags *tags, int objectId,
++				int chunkInInode)
+ {
+ 	int j;
+ 
+ 	for (j = 0; theChunk && j < dev->chunkGroupSize; j++) {
+-		if (yaffs_CheckChunkBit
+-		    (dev, theChunk / dev->nChunksPerBlock,
+-		     theChunk % dev->nChunksPerBlock)) {
++		if (yaffs_CheckChunkBit(dev, theChunk / dev->nChunksPerBlock,
++				theChunk % dev->nChunksPerBlock)) {
+ 			yaffs_ReadChunkWithTagsFromNAND(dev, theChunk, NULL,
+ 							tags);
+ 			if (yaffs_TagsMatch(tags, objectId, chunkInInode)) {
+ 				/* found it; */
+ 				return theChunk;
+-
+ 			}
+ 		}
+ 		theChunk++;
+@@ -1543,7 +1563,7 @@ static int yaffs_FindChunkInGroup(yaffs_
+  * Returns 0 if it stopped early due to hitting the limit and the delete is incomplete.
+  */
+ 
+-static int yaffs_DeleteWorker(yaffs_Object * in, yaffs_Tnode * tn, __u32 level,
++static int yaffs_DeleteWorker(yaffs_Object *in, yaffs_Tnode *tn, __u32 level,
+ 			      int chunkOffset, int *limit)
+ {
+ 	int i;
+@@ -1557,7 +1577,6 @@ static int yaffs_DeleteWorker(yaffs_Obje
+ 
+ 	if (tn) {
+ 		if (level > 0) {
+-
+ 			for (i = YAFFS_NTNODES_INTERNAL - 1; allDone && i >= 0;
+ 			     i--) {
+ 				if (tn->internal[i]) {
+@@ -1565,17 +1584,17 @@ static int yaffs_DeleteWorker(yaffs_Obje
+ 						allDone = 0;
+ 					} else {
+ 						allDone =
+-						    yaffs_DeleteWorker(in,
+-								       tn->
+-								       internal
+-								       [i],
+-								       level -
+-								       1,
+-								       (chunkOffset
++							yaffs_DeleteWorker(in,
++								tn->
++								internal
++								[i],
++								level -
++								1,
++								(chunkOffset
+ 									<<
+ 									YAFFS_TNODES_INTERNAL_BITS)
+-								       + i,
+-								       limit);
++								+ i,
++								limit);
+ 					}
+ 					if (allDone) {
+ 						yaffs_FreeTnode(dev,
+@@ -1584,27 +1603,25 @@ static int yaffs_DeleteWorker(yaffs_Obje
+ 						tn->internal[i] = NULL;
+ 					}
+ 				}
+-
+ 			}
+ 			return (allDone) ? 1 : 0;
+ 		} else if (level == 0) {
+ 			int hitLimit = 0;
+ 
+ 			for (i = YAFFS_NTNODES_LEVEL0 - 1; i >= 0 && !hitLimit;
+-			     i--) {
+-			        theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
++					i--) {
++				theChunk = yaffs_GetChunkGroupBase(dev, tn, i);
+ 				if (theChunk) {
+ 
+-					chunkInInode =
+-					    (chunkOffset <<
+-					     YAFFS_TNODES_LEVEL0_BITS) + i;
++					chunkInInode = (chunkOffset <<
++						YAFFS_TNODES_LEVEL0_BITS) + i;
+ 
+ 					foundChunk =
+-					    yaffs_FindChunkInGroup(dev,
+-								   theChunk,
+-								   &tags,
+-								   in->objectId,
+-								   chunkInInode);
++						yaffs_FindChunkInGroup(dev,
++								theChunk,
++								&tags,
++								in->objectId,
++								chunkInInode);
+ 
+ 					if (foundChunk > 0) {
+ 						yaffs_DeleteChunk(dev,
+@@ -1613,14 +1630,13 @@ static int yaffs_DeleteWorker(yaffs_Obje
+ 						in->nDataChunks--;
+ 						if (limit) {
+ 							*limit = *limit - 1;
+-							if (*limit <= 0) {
++							if (*limit <= 0)
+ 								hitLimit = 1;
+-							}
+ 						}
+ 
+ 					}
+ 
+-					yaffs_PutLevel0Tnode(dev,tn,i,0);
++					yaffs_PutLevel0Tnode(dev, tn, i, 0);
+ 				}
+ 
+ 			}
+@@ -1634,9 +1650,8 @@ static int yaffs_DeleteWorker(yaffs_Obje
+ 
+ }
+ 
+-static void yaffs_SoftDeleteChunk(yaffs_Device * dev, int chunk)
++static void yaffs_SoftDeleteChunk(yaffs_Device *dev, int chunk)
+ {
+-
+ 	yaffs_BlockInfo *theBlock;
+ 
+ 	T(YAFFS_TRACE_DELETION, (TSTR("soft delete chunk %d" TENDSTR), chunk));
+@@ -1654,7 +1669,7 @@ static void yaffs_SoftDeleteChunk(yaffs_
+  * Thus, essentially this is the same as DeleteWorker except that the chunks are soft deleted.
+  */
+ 
+-static int yaffs_SoftDeleteWorker(yaffs_Object * in, yaffs_Tnode * tn,
++static int yaffs_SoftDeleteWorker(yaffs_Object *in, yaffs_Tnode *tn,
+ 				  __u32 level, int chunkOffset)
+ {
+ 	int i;
+@@ -1691,14 +1706,14 @@ static int yaffs_SoftDeleteWorker(yaffs_
+ 		} else if (level == 0) {
+ 
+ 			for (i = YAFFS_NTNODES_LEVEL0 - 1; i >= 0; i--) {
+-				theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
++				theChunk = yaffs_GetChunkGroupBase(dev, tn, i);
+ 				if (theChunk) {
+ 					/* Note this does not find the real chunk, only the chunk group.
+ 					 * We make an assumption that a chunk group is not larger than
+ 					 * a block.
+ 					 */
+ 					yaffs_SoftDeleteChunk(dev, theChunk);
+-					yaffs_PutLevel0Tnode(dev,tn,i,0);
++					yaffs_PutLevel0Tnode(dev, tn, i, 0);
+ 				}
+ 
+ 			}
+@@ -1712,7 +1727,7 @@ static int yaffs_SoftDeleteWorker(yaffs_
+ 
+ }
+ 
+-static void yaffs_SoftDeleteFile(yaffs_Object * obj)
++static void yaffs_SoftDeleteFile(yaffs_Object *obj)
+ {
+ 	if (obj->deleted &&
+ 	    obj->variantType == YAFFS_OBJECT_TYPE_FILE && !obj->softDeleted) {
+@@ -1746,8 +1761,8 @@ static void yaffs_SoftDeleteFile(yaffs_O
+  * by a special case.
+  */
+ 
+-static yaffs_Tnode *yaffs_PruneWorker(yaffs_Device * dev, yaffs_Tnode * tn,
+-				      __u32 level, int del0)
++static yaffs_Tnode *yaffs_PruneWorker(yaffs_Device *dev, yaffs_Tnode *tn,
++				__u32 level, int del0)
+ {
+ 	int i;
+ 	int hasData;
+@@ -1763,9 +1778,8 @@ static yaffs_Tnode *yaffs_PruneWorker(ya
+ 						      (i == 0) ? del0 : 1);
+ 			}
+ 
+-			if (tn->internal[i]) {
++			if (tn->internal[i])
+ 				hasData++;
+-			}
+ 		}
+ 
+ 		if (hasData == 0 && del0) {
+@@ -1781,8 +1795,8 @@ static yaffs_Tnode *yaffs_PruneWorker(ya
+ 
+ }
+ 
+-static int yaffs_PruneFileStructure(yaffs_Device * dev,
+-				    yaffs_FileStructure * fStruct)
++static int yaffs_PruneFileStructure(yaffs_Device *dev,
++				yaffs_FileStructure *fStruct)
+ {
+ 	int i;
+ 	int hasData;
+@@ -1805,9 +1819,8 @@ static int yaffs_PruneFileStructure(yaff
+ 
+ 			hasData = 0;
+ 			for (i = 1; i < YAFFS_NTNODES_INTERNAL; i++) {
+-				if (tn->internal[i]) {
++				if (tn->internal[i])
+ 					hasData++;
+-				}
+ 			}
+ 
+ 			if (!hasData) {
+@@ -1828,7 +1841,7 @@ static int yaffs_PruneFileStructure(yaff
+ /* yaffs_CreateFreeObjects creates a bunch more objects and
+  * adds them to the object free list.
+  */
+-static int yaffs_CreateFreeObjects(yaffs_Device * dev, int nObjects)
++static int yaffs_CreateFreeObjects(yaffs_Device *dev, int nObjects)
+ {
+ 	int i;
+ 	yaffs_Object *newObjects;
+@@ -1842,9 +1855,9 @@ static int yaffs_CreateFreeObjects(yaffs
+ 	list = YMALLOC(sizeof(yaffs_ObjectList));
+ 
+ 	if (!newObjects || !list) {
+-		if(newObjects)
++		if (newObjects)
+ 			YFREE(newObjects);
+-		if(list)
++		if (list)
+ 			YFREE(list);
+ 		T(YAFFS_TRACE_ALLOCATE,
+ 		  (TSTR("yaffs: Could not allocate more objects" TENDSTR)));
+@@ -1854,7 +1867,7 @@ static int yaffs_CreateFreeObjects(yaffs
+ 	/* Hook them into the free list */
+ 	for (i = 0; i < nObjects - 1; i++) {
+ 		newObjects[i].siblings.next =
+-		    (struct list_head *)(&newObjects[i + 1]);
++				(struct ylist_head *)(&newObjects[i + 1]);
+ 	}
+ 
+ 	newObjects[nObjects - 1].siblings.next = (void *)dev->freeObjects;
+@@ -1873,85 +1886,109 @@ static int yaffs_CreateFreeObjects(yaffs
+ 
+ 
+ /* AllocateEmptyObject gets us a clean Object. Tries to make allocate more if we run out */
+-static yaffs_Object *yaffs_AllocateEmptyObject(yaffs_Device * dev)
++static yaffs_Object *yaffs_AllocateEmptyObject(yaffs_Device *dev)
+ {
+ 	yaffs_Object *tn = NULL;
+ 
++#ifdef VALGRIND_TEST
++	tn = YMALLOC(sizeof(yaffs_Object));
++#else
+ 	/* If there are none left make more */
+-	if (!dev->freeObjects) {
++	if (!dev->freeObjects)
+ 		yaffs_CreateFreeObjects(dev, YAFFS_ALLOCATION_NOBJECTS);
+-	}
+ 
+ 	if (dev->freeObjects) {
+ 		tn = dev->freeObjects;
+ 		dev->freeObjects =
+-		    (yaffs_Object *) (dev->freeObjects->siblings.next);
++			(yaffs_Object *) (dev->freeObjects->siblings.next);
+ 		dev->nFreeObjects--;
+-
++	}
++#endif
++	if (tn) {
+ 		/* Now sweeten it up... */
+ 
+ 		memset(tn, 0, sizeof(yaffs_Object));
++		tn->beingCreated = 1;
++
+ 		tn->myDev = dev;
+-		tn->chunkId = -1;
++		tn->hdrChunk = 0;
+ 		tn->variantType = YAFFS_OBJECT_TYPE_UNKNOWN;
+-		INIT_LIST_HEAD(&(tn->hardLinks));
+-		INIT_LIST_HEAD(&(tn->hashLink));
+-		INIT_LIST_HEAD(&tn->siblings);
++		YINIT_LIST_HEAD(&(tn->hardLinks));
++		YINIT_LIST_HEAD(&(tn->hashLink));
++		YINIT_LIST_HEAD(&tn->siblings);
++
++
++		/* Now make the directory sane */
++		if (dev->rootDir) {
++			tn->parent = dev->rootDir;
++			ylist_add(&(tn->siblings), &dev->rootDir->variant.directoryVariant.children);
++		}
+ 
+ 		/* Add it to the lost and found directory.
+ 		 * NB Can't put root or lostNFound in lostNFound so
+ 		 * check if lostNFound exists first
+ 		 */
+-		if (dev->lostNFoundDir) {
++		if (dev->lostNFoundDir)
+ 			yaffs_AddObjectToDirectory(dev->lostNFoundDir, tn);
+-		}
++
++		tn->beingCreated = 0;
+ 	}
+ 
++	dev->nCheckpointBlocksRequired = 0; /* force recalculation*/
++
+ 	return tn;
+ }
+ 
+-static yaffs_Object *yaffs_CreateFakeDirectory(yaffs_Device * dev, int number,
++static yaffs_Object *yaffs_CreateFakeDirectory(yaffs_Device *dev, int number,
+ 					       __u32 mode)
+ {
+ 
+ 	yaffs_Object *obj =
+ 	    yaffs_CreateNewObject(dev, number, YAFFS_OBJECT_TYPE_DIRECTORY);
+ 	if (obj) {
+-		obj->fake = 1;		/* it is fake so it has no NAND presence... */
++		obj->fake = 1;		/* it is fake so it might have no NAND presence... */
+ 		obj->renameAllowed = 0;	/* ... and we're not allowed to rename it... */
+ 		obj->unlinkAllowed = 0;	/* ... or unlink it */
+ 		obj->deleted = 0;
+ 		obj->unlinked = 0;
+ 		obj->yst_mode = mode;
+ 		obj->myDev = dev;
+-		obj->chunkId = 0;	/* Not a valid chunk. */
++		obj->hdrChunk = 0;	/* Not a valid chunk. */
+ 	}
+ 
+ 	return obj;
+ 
+ }
+ 
+-static void yaffs_UnhashObject(yaffs_Object * tn)
++static void yaffs_UnhashObject(yaffs_Object *tn)
+ {
+ 	int bucket;
+ 	yaffs_Device *dev = tn->myDev;
+ 
+ 	/* If it is still linked into the bucket list, free from the list */
+-	if (!list_empty(&tn->hashLink)) {
+-		list_del_init(&tn->hashLink);
++	if (!ylist_empty(&tn->hashLink)) {
++		ylist_del_init(&tn->hashLink);
+ 		bucket = yaffs_HashFunction(tn->objectId);
+ 		dev->objectBucket[bucket].count--;
+ 	}
+-
+ }
+ 
+ /*  FreeObject frees up a Object and puts it back on the free list */
+-static void yaffs_FreeObject(yaffs_Object * tn)
++static void yaffs_FreeObject(yaffs_Object *tn)
+ {
+-
+ 	yaffs_Device *dev = tn->myDev;
+ 
+-#ifdef  __KERNEL__
++#ifdef __KERNEL__
++	T(YAFFS_TRACE_OS, (TSTR("FreeObject %p inode %p"TENDSTR), tn, tn->myInode));
++#endif
++
++	if (tn->parent)
++		YBUG();
++	if (!ylist_empty(&tn->siblings))
++		YBUG();
++
++
++#ifdef __KERNEL__
+ 	if (tn->myInode) {
+ 		/* We're still hooked up to a cached inode.
+ 		 * Don't delete now, but mark for later deletion
+@@ -1963,24 +2000,28 @@ static void yaffs_FreeObject(yaffs_Objec
+ 
+ 	yaffs_UnhashObject(tn);
+ 
++#ifdef VALGRIND_TEST
++	YFREE(tn);
++#else
+ 	/* Link into the free list. */
+-	tn->siblings.next = (struct list_head *)(dev->freeObjects);
++	tn->siblings.next = (struct ylist_head *)(dev->freeObjects);
+ 	dev->freeObjects = tn;
+ 	dev->nFreeObjects++;
++#endif
++	dev->nCheckpointBlocksRequired = 0; /* force recalculation*/
+ }
+ 
+ #ifdef __KERNEL__
+ 
+-void yaffs_HandleDeferedFree(yaffs_Object * obj)
++void yaffs_HandleDeferedFree(yaffs_Object *obj)
+ {
+-	if (obj->deferedFree) {
++	if (obj->deferedFree)
+ 		yaffs_FreeObject(obj);
+-	}
+ }
+ 
+ #endif
+ 
+-static void yaffs_DeinitialiseObjects(yaffs_Device * dev)
++static void yaffs_DeinitialiseObjects(yaffs_Device *dev)
+ {
+ 	/* Free the list of allocated Objects */
+ 
+@@ -1998,7 +2039,7 @@ static void yaffs_DeinitialiseObjects(ya
+ 	dev->nFreeObjects = 0;
+ }
+ 
+-static void yaffs_InitialiseObjects(yaffs_Device * dev)
++static void yaffs_InitialiseObjects(yaffs_Device *dev)
+ {
+ 	int i;
+ 
+@@ -2007,15 +2048,14 @@ static void yaffs_InitialiseObjects(yaff
+ 	dev->nFreeObjects = 0;
+ 
+ 	for (i = 0; i < YAFFS_NOBJECT_BUCKETS; i++) {
+-		INIT_LIST_HEAD(&dev->objectBucket[i].list);
++		YINIT_LIST_HEAD(&dev->objectBucket[i].list);
+ 		dev->objectBucket[i].count = 0;
+ 	}
+-
+ }
+ 
+-static int yaffs_FindNiceObjectBucket(yaffs_Device * dev)
++static int yaffs_FindNiceObjectBucket(yaffs_Device *dev)
+ {
+-	static int x = 0;
++	static int x;
+ 	int i;
+ 	int l = 999;
+ 	int lowest = 999999;
+@@ -2049,7 +2089,7 @@ static int yaffs_FindNiceObjectBucket(ya
+ 	return l;
+ }
+ 
+-static int yaffs_CreateNewObjectNumber(yaffs_Device * dev)
++static int yaffs_CreateNewObjectNumber(yaffs_Device *dev)
+ {
+ 	int bucket = yaffs_FindNiceObjectBucket(dev);
+ 
+@@ -2058,7 +2098,7 @@ static int yaffs_CreateNewObjectNumber(y
+ 	 */
+ 
+ 	int found = 0;
+-	struct list_head *i;
++	struct ylist_head *i;
+ 
+ 	__u32 n = (__u32) bucket;
+ 
+@@ -2068,41 +2108,38 @@ static int yaffs_CreateNewObjectNumber(y
+ 		found = 1;
+ 		n += YAFFS_NOBJECT_BUCKETS;
+ 		if (1 || dev->objectBucket[bucket].count > 0) {
+-			list_for_each(i, &dev->objectBucket[bucket].list) {
++			ylist_for_each(i, &dev->objectBucket[bucket].list) {
+ 				/* If there is already one in the list */
+-				if (i
+-				    && list_entry(i, yaffs_Object,
+-						  hashLink)->objectId == n) {
++				if (i && ylist_entry(i, yaffs_Object,
++						hashLink)->objectId == n) {
+ 					found = 0;
+ 				}
+ 			}
+ 		}
+ 	}
+ 
+-
+ 	return n;
+ }
+ 
+-static void yaffs_HashObject(yaffs_Object * in)
++static void yaffs_HashObject(yaffs_Object *in)
+ {
+ 	int bucket = yaffs_HashFunction(in->objectId);
+ 	yaffs_Device *dev = in->myDev;
+ 
+-	list_add(&in->hashLink, &dev->objectBucket[bucket].list);
++	ylist_add(&in->hashLink, &dev->objectBucket[bucket].list);
+ 	dev->objectBucket[bucket].count++;
+-
+ }
+ 
+-yaffs_Object *yaffs_FindObjectByNumber(yaffs_Device * dev, __u32 number)
++yaffs_Object *yaffs_FindObjectByNumber(yaffs_Device *dev, __u32 number)
+ {
+ 	int bucket = yaffs_HashFunction(number);
+-	struct list_head *i;
++	struct ylist_head *i;
+ 	yaffs_Object *in;
+ 
+-	list_for_each(i, &dev->objectBucket[bucket].list) {
++	ylist_for_each(i, &dev->objectBucket[bucket].list) {
+ 		/* Look if it is in the list */
+ 		if (i) {
+-			in = list_entry(i, yaffs_Object, hashLink);
++			in = ylist_entry(i, yaffs_Object, hashLink);
+ 			if (in->objectId == number) {
+ #ifdef __KERNEL__
+ 				/* Don't tell the VFS about this one if it is defered free */
+@@ -2118,31 +2155,27 @@ yaffs_Object *yaffs_FindObjectByNumber(y
+ 	return NULL;
+ }
+ 
+-yaffs_Object *yaffs_CreateNewObject(yaffs_Device * dev, int number,
++yaffs_Object *yaffs_CreateNewObject(yaffs_Device *dev, int number,
+ 				    yaffs_ObjectType type)
+ {
+-
+ 	yaffs_Object *theObject;
+-	yaffs_Tnode *tn;
++	yaffs_Tnode *tn = NULL;
+ 
+-	if (number < 0) {
++	if (number < 0)
+ 		number = yaffs_CreateNewObjectNumber(dev);
+-	}
+ 
+ 	theObject = yaffs_AllocateEmptyObject(dev);
+-	if(!theObject)
++	if (!theObject)
+ 		return NULL;
+ 
+-	if(type == YAFFS_OBJECT_TYPE_FILE){
++	if (type == YAFFS_OBJECT_TYPE_FILE) {
+ 		tn = yaffs_GetTnode(dev);
+-		if(!tn){
++		if (!tn) {
+ 			yaffs_FreeObject(theObject);
+ 			return NULL;
+ 		}
+ 	}
+ 
+-
+-
+ 	if (theObject) {
+ 		theObject->fake = 0;
+ 		theObject->renameAllowed = 1;
+@@ -2171,8 +2204,8 @@ yaffs_Object *yaffs_CreateNewObject(yaff
+ 			theObject->variant.fileVariant.top = tn;
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_DIRECTORY:
+-			INIT_LIST_HEAD(&theObject->variant.directoryVariant.
+-				       children);
++			YINIT_LIST_HEAD(&theObject->variant.directoryVariant.
++					children);
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_SYMLINK:
+ 		case YAFFS_OBJECT_TYPE_HARDLINK:
+@@ -2188,32 +2221,30 @@ yaffs_Object *yaffs_CreateNewObject(yaff
+ 	return theObject;
+ }
+ 
+-static yaffs_Object *yaffs_FindOrCreateObjectByNumber(yaffs_Device * dev,
++static yaffs_Object *yaffs_FindOrCreateObjectByNumber(yaffs_Device *dev,
+ 						      int number,
+ 						      yaffs_ObjectType type)
+ {
+ 	yaffs_Object *theObject = NULL;
+ 
+-	if (number > 0) {
++	if (number > 0)
+ 		theObject = yaffs_FindObjectByNumber(dev, number);
+-	}
+ 
+-	if (!theObject) {
++	if (!theObject)
+ 		theObject = yaffs_CreateNewObject(dev, number, type);
+-	}
+ 
+ 	return theObject;
+ 
+ }
+ 
+ 
+-static YCHAR *yaffs_CloneString(const YCHAR * str)
++static YCHAR *yaffs_CloneString(const YCHAR *str)
+ {
+ 	YCHAR *newStr = NULL;
+ 
+ 	if (str && *str) {
+ 		newStr = YMALLOC((yaffs_strlen(str) + 1) * sizeof(YCHAR));
+-		if(newStr)
++		if (newStr)
+ 			yaffs_strcpy(newStr, str);
+ 	}
+ 
+@@ -2229,29 +2260,31 @@ static YCHAR *yaffs_CloneString(const YC
+  */
+ 
+ static yaffs_Object *yaffs_MknodObject(yaffs_ObjectType type,
+-				       yaffs_Object * parent,
+-				       const YCHAR * name,
++				       yaffs_Object *parent,
++				       const YCHAR *name,
+ 				       __u32 mode,
+ 				       __u32 uid,
+ 				       __u32 gid,
+-				       yaffs_Object * equivalentObject,
+-				       const YCHAR * aliasString, __u32 rdev)
++				       yaffs_Object *equivalentObject,
++				       const YCHAR *aliasString, __u32 rdev)
+ {
+ 	yaffs_Object *in;
+-	YCHAR *str;
++	YCHAR *str = NULL;
+ 
+ 	yaffs_Device *dev = parent->myDev;
+ 
+ 	/* Check if the entry exists. If it does then fail the call since we don't want a dup.*/
+-	if (yaffs_FindObjectByName(parent, name)) {
++	if (yaffs_FindObjectByName(parent, name))
+ 		return NULL;
+-	}
+ 
+ 	in = yaffs_CreateNewObject(dev, -1, type);
+ 
+-	if(type == YAFFS_OBJECT_TYPE_SYMLINK){
++	if (!in)
++		return YAFFS_FAIL;
++
++	if (type == YAFFS_OBJECT_TYPE_SYMLINK) {
+ 		str = yaffs_CloneString(aliasString);
+-		if(!str){
++		if (!str) {
+ 			yaffs_FreeObject(in);
+ 			return NULL;
+ 		}
+@@ -2260,7 +2293,7 @@ static yaffs_Object *yaffs_MknodObject(y
+ 
+ 
+ 	if (in) {
+-		in->chunkId = -1;
++		in->hdrChunk = 0;
+ 		in->valid = 1;
+ 		in->variantType = type;
+ 
+@@ -2293,10 +2326,10 @@ static yaffs_Object *yaffs_MknodObject(y
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_HARDLINK:
+ 			in->variant.hardLinkVariant.equivalentObject =
+-			    equivalentObject;
++				equivalentObject;
+ 			in->variant.hardLinkVariant.equivalentObjectId =
+-			    equivalentObject->objectId;
+-			list_add(&in->hardLinks, &equivalentObject->hardLinks);
++				equivalentObject->objectId;
++			ylist_add(&in->hardLinks, &equivalentObject->hardLinks);
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_FILE:
+ 		case YAFFS_OBJECT_TYPE_DIRECTORY:
+@@ -2308,7 +2341,7 @@ static yaffs_Object *yaffs_MknodObject(y
+ 
+ 		if (yaffs_UpdateObjectHeader(in, name, 0, 0, 0) < 0) {
+ 			/* Could not create the object header, fail the creation */
+-			yaffs_DestroyObject(in);
++			yaffs_DeleteObject(in);
+ 			in = NULL;
+ 		}
+ 
+@@ -2317,38 +2350,38 @@ static yaffs_Object *yaffs_MknodObject(y
+ 	return in;
+ }
+ 
+-yaffs_Object *yaffs_MknodFile(yaffs_Object * parent, const YCHAR * name,
+-			      __u32 mode, __u32 uid, __u32 gid)
++yaffs_Object *yaffs_MknodFile(yaffs_Object *parent, const YCHAR *name,
++			__u32 mode, __u32 uid, __u32 gid)
+ {
+ 	return yaffs_MknodObject(YAFFS_OBJECT_TYPE_FILE, parent, name, mode,
+-				 uid, gid, NULL, NULL, 0);
++				uid, gid, NULL, NULL, 0);
+ }
+ 
+-yaffs_Object *yaffs_MknodDirectory(yaffs_Object * parent, const YCHAR * name,
+-				   __u32 mode, __u32 uid, __u32 gid)
++yaffs_Object *yaffs_MknodDirectory(yaffs_Object *parent, const YCHAR *name,
++				__u32 mode, __u32 uid, __u32 gid)
+ {
+ 	return yaffs_MknodObject(YAFFS_OBJECT_TYPE_DIRECTORY, parent, name,
+ 				 mode, uid, gid, NULL, NULL, 0);
+ }
+ 
+-yaffs_Object *yaffs_MknodSpecial(yaffs_Object * parent, const YCHAR * name,
+-				 __u32 mode, __u32 uid, __u32 gid, __u32 rdev)
++yaffs_Object *yaffs_MknodSpecial(yaffs_Object *parent, const YCHAR *name,
++				__u32 mode, __u32 uid, __u32 gid, __u32 rdev)
+ {
+ 	return yaffs_MknodObject(YAFFS_OBJECT_TYPE_SPECIAL, parent, name, mode,
+ 				 uid, gid, NULL, NULL, rdev);
+ }
+ 
+-yaffs_Object *yaffs_MknodSymLink(yaffs_Object * parent, const YCHAR * name,
+-				 __u32 mode, __u32 uid, __u32 gid,
+-				 const YCHAR * alias)
++yaffs_Object *yaffs_MknodSymLink(yaffs_Object *parent, const YCHAR *name,
++				__u32 mode, __u32 uid, __u32 gid,
++				const YCHAR *alias)
+ {
+ 	return yaffs_MknodObject(YAFFS_OBJECT_TYPE_SYMLINK, parent, name, mode,
+-				 uid, gid, NULL, alias, 0);
++				uid, gid, NULL, alias, 0);
+ }
+ 
+ /* yaffs_Link returns the object id of the equivalent object.*/
+-yaffs_Object *yaffs_Link(yaffs_Object * parent, const YCHAR * name,
+-			 yaffs_Object * equivalentObject)
++yaffs_Object *yaffs_Link(yaffs_Object *parent, const YCHAR *name,
++			yaffs_Object *equivalentObject)
+ {
+ 	/* Get the real object in case we were fed a hard link as an equivalent object */
+ 	equivalentObject = yaffs_GetEquivalentObject(equivalentObject);
+@@ -2363,33 +2396,31 @@ yaffs_Object *yaffs_Link(yaffs_Object * 
+ 
+ }
+ 
+-static int yaffs_ChangeObjectName(yaffs_Object * obj, yaffs_Object * newDir,
+-				  const YCHAR * newName, int force, int shadows)
++static int yaffs_ChangeObjectName(yaffs_Object *obj, yaffs_Object *newDir,
++				const YCHAR *newName, int force, int shadows)
+ {
+ 	int unlinkOp;
+ 	int deleteOp;
+ 
+ 	yaffs_Object *existingTarget;
+ 
+-	if (newDir == NULL) {
++	if (newDir == NULL)
+ 		newDir = obj->parent;	/* use the old directory */
+-	}
+ 
+ 	if (newDir->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 		T(YAFFS_TRACE_ALWAYS,
+ 		  (TSTR
+-		   ("tragendy: yaffs_ChangeObjectName: newDir is not a directory"
++		   ("tragedy: yaffs_ChangeObjectName: newDir is not a directory"
+ 		    TENDSTR)));
+ 		YBUG();
+ 	}
+ 
+ 	/* TODO: Do we need this different handling for YAFFS2 and YAFFS1?? */
+-	if (obj->myDev->isYaffs2) {
++	if (obj->myDev->isYaffs2)
+ 		unlinkOp = (newDir == obj->myDev->unlinkedDir);
+-	} else {
++	else
+ 		unlinkOp = (newDir == obj->myDev->unlinkedDir
+ 			    && obj->variantType == YAFFS_OBJECT_TYPE_FILE);
+-	}
+ 
+ 	deleteOp = (newDir == obj->myDev->deletedDir);
+ 
+@@ -2415,40 +2446,40 @@ static int yaffs_ChangeObjectName(yaffs_
+ 			obj->unlinked = 1;
+ 
+ 		/* If it is a deletion then we mark it as a shrink for gc purposes. */
+-		if (yaffs_UpdateObjectHeader(obj, newName, 0, deleteOp, shadows)>= 0)
++		if (yaffs_UpdateObjectHeader(obj, newName, 0, deleteOp, shadows) >= 0)
+ 			return YAFFS_OK;
+ 	}
+ 
+ 	return YAFFS_FAIL;
+ }
+ 
+-int yaffs_RenameObject(yaffs_Object * oldDir, const YCHAR * oldName,
+-		       yaffs_Object * newDir, const YCHAR * newName)
++int yaffs_RenameObject(yaffs_Object *oldDir, const YCHAR *oldName,
++		yaffs_Object *newDir, const YCHAR *newName)
+ {
+-	yaffs_Object *obj;
+-	yaffs_Object *existingTarget;
++	yaffs_Object *obj = NULL;
++	yaffs_Object *existingTarget = NULL;
+ 	int force = 0;
+ 
++
++	if (!oldDir || oldDir->variantType != YAFFS_OBJECT_TYPE_DIRECTORY)
++		YBUG();
++	if (!newDir || newDir->variantType != YAFFS_OBJECT_TYPE_DIRECTORY)
++		YBUG();
++
+ #ifdef CONFIG_YAFFS_CASE_INSENSITIVE
+ 	/* Special case for case insemsitive systems (eg. WinCE).
+ 	 * While look-up is case insensitive, the name isn't.
+ 	 * Therefore we might want to change x.txt to X.txt
+ 	*/
+-	if (oldDir == newDir && yaffs_strcmp(oldName, newName) == 0) {
++	if (oldDir == newDir && yaffs_strcmp(oldName, newName) == 0)
+ 		force = 1;
+-	}
+ #endif
+ 
++	else if (yaffs_strlen(newName) > YAFFS_MAX_NAME_LENGTH)
++		/* ENAMETOOLONG */
++		return YAFFS_FAIL;
++
+ 	obj = yaffs_FindObjectByName(oldDir, oldName);
+-	/* Check new name to long. */
+-	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK &&
+-	    yaffs_strlen(newName) > YAFFS_MAX_ALIAS_LENGTH)
+-	  /* ENAMETOOLONG */
+-	  return YAFFS_FAIL;
+-	else if (obj->variantType != YAFFS_OBJECT_TYPE_SYMLINK &&
+-		 yaffs_strlen(newName) > YAFFS_MAX_NAME_LENGTH)
+-	  /* ENAMETOOLONG */
+-	  return YAFFS_FAIL;
+ 
+ 	if (obj && obj->renameAllowed) {
+ 
+@@ -2456,8 +2487,8 @@ int yaffs_RenameObject(yaffs_Object * ol
+ 
+ 		existingTarget = yaffs_FindObjectByName(newDir, newName);
+ 		if (existingTarget &&
+-		    existingTarget->variantType == YAFFS_OBJECT_TYPE_DIRECTORY &&
+-		    !list_empty(&existingTarget->variant.directoryVariant.children)) {
++			existingTarget->variantType == YAFFS_OBJECT_TYPE_DIRECTORY &&
++			!ylist_empty(&existingTarget->variant.directoryVariant.children)) {
+ 			/* There is a target that is a non-empty directory, so we fail */
+ 			return YAFFS_FAIL;	/* EEXIST or ENOTEMPTY */
+ 		} else if (existingTarget && existingTarget != obj) {
+@@ -2465,7 +2496,7 @@ int yaffs_RenameObject(yaffs_Object * ol
+ 			 * but only if it isn't the same object
+ 			 */
+ 			yaffs_ChangeObjectName(obj, newDir, newName, force,
+-					       existingTarget->objectId);
++						existingTarget->objectId);
+ 			yaffs_UnlinkObject(existingTarget);
+ 		}
+ 
+@@ -2476,7 +2507,7 @@ int yaffs_RenameObject(yaffs_Object * ol
+ 
+ /*------------------------- Block Management and Page Allocation ----------------*/
+ 
+-static int yaffs_InitialiseBlocks(yaffs_Device * dev)
++static int yaffs_InitialiseBlocks(yaffs_Device *dev)
+ {
+ 	int nBlocks = dev->internalEndBlock - dev->internalStartBlock + 1;
+ 
+@@ -2487,23 +2518,20 @@ static int yaffs_InitialiseBlocks(yaffs_
+ 
+ 	/* If the first allocation strategy fails, thry the alternate one */
+ 	dev->blockInfo = YMALLOC(nBlocks * sizeof(yaffs_BlockInfo));
+-	if(!dev->blockInfo){
++	if (!dev->blockInfo) {
+ 		dev->blockInfo = YMALLOC_ALT(nBlocks * sizeof(yaffs_BlockInfo));
+ 		dev->blockInfoAlt = 1;
+-	}
+-	else
++	} else
+ 		dev->blockInfoAlt = 0;
+ 
+-	if(dev->blockInfo){
+-
++	if (dev->blockInfo) {
+ 		/* Set up dynamic blockinfo stuff. */
+ 		dev->chunkBitmapStride = (dev->nChunksPerBlock + 7) / 8; /* round up bytes */
+ 		dev->chunkBits = YMALLOC(dev->chunkBitmapStride * nBlocks);
+-		if(!dev->chunkBits){
++		if (!dev->chunkBits) {
+ 			dev->chunkBits = YMALLOC_ALT(dev->chunkBitmapStride * nBlocks);
+ 			dev->chunkBitsAlt = 1;
+-		}
+-		else
++		} else
+ 			dev->chunkBitsAlt = 0;
+ 	}
+ 
+@@ -2514,30 +2542,29 @@ static int yaffs_InitialiseBlocks(yaffs_
+ 	}
+ 
+ 	return YAFFS_FAIL;
+-
+ }
+ 
+-static void yaffs_DeinitialiseBlocks(yaffs_Device * dev)
++static void yaffs_DeinitialiseBlocks(yaffs_Device *dev)
+ {
+-	if(dev->blockInfoAlt && dev->blockInfo)
++	if (dev->blockInfoAlt && dev->blockInfo)
+ 		YFREE_ALT(dev->blockInfo);
+-	else if(dev->blockInfo)
++	else if (dev->blockInfo)
+ 		YFREE(dev->blockInfo);
+ 
+ 	dev->blockInfoAlt = 0;
+ 
+ 	dev->blockInfo = NULL;
+ 
+-	if(dev->chunkBitsAlt && dev->chunkBits)
++	if (dev->chunkBitsAlt && dev->chunkBits)
+ 		YFREE_ALT(dev->chunkBits);
+-	else if(dev->chunkBits)
++	else if (dev->chunkBits)
+ 		YFREE(dev->chunkBits);
+ 	dev->chunkBitsAlt = 0;
+ 	dev->chunkBits = NULL;
+ }
+ 
+-static int yaffs_BlockNotDisqualifiedFromGC(yaffs_Device * dev,
+-					    yaffs_BlockInfo * bi)
++static int yaffs_BlockNotDisqualifiedFromGC(yaffs_Device *dev,
++					yaffs_BlockInfo *bi)
+ {
+ 	int i;
+ 	__u32 seq;
+@@ -2556,7 +2583,7 @@ static int yaffs_BlockNotDisqualifiedFro
+ 		seq = dev->sequenceNumber;
+ 
+ 		for (i = dev->internalStartBlock; i <= dev->internalEndBlock;
+-		     i++) {
++				i++) {
+ 			b = yaffs_GetBlockInfo(dev, i);
+ 			if (b->blockState == YAFFS_BLOCK_STATE_FULL &&
+ 			    (b->pagesInUse - b->softDeletions) <
+@@ -2571,38 +2598,36 @@ static int yaffs_BlockNotDisqualifiedFro
+ 	 * discarded pages.
+ 	 */
+ 	return (bi->sequenceNumber <= dev->oldestDirtySequence);
+-
+ }
+ 
+ /* FindDiretiestBlock is used to select the dirtiest block (or close enough)
+  * for garbage collection.
+  */
+ 
+-static int yaffs_FindBlockForGarbageCollection(yaffs_Device * dev,
+-					       int aggressive)
++static int yaffs_FindBlockForGarbageCollection(yaffs_Device *dev,
++					int aggressive)
+ {
+-
+ 	int b = dev->currentDirtyChecker;
+ 
+ 	int i;
+ 	int iterations;
+ 	int dirtiest = -1;
+ 	int pagesInUse = 0;
+-	int prioritised=0;
++	int prioritised = 0;
+ 	yaffs_BlockInfo *bi;
+ 	int pendingPrioritisedExist = 0;
+ 
+ 	/* First let's see if we need to grab a prioritised block */
+-	if(dev->hasPendingPrioritisedGCs){
+-		for(i = dev->internalStartBlock; i < dev->internalEndBlock && !prioritised; i++){
++	if (dev->hasPendingPrioritisedGCs) {
++		for (i = dev->internalStartBlock; i < dev->internalEndBlock && !prioritised; i++) {
+ 
+ 			bi = yaffs_GetBlockInfo(dev, i);
+-			//yaffs_VerifyBlock(dev,bi,i);
++			/* yaffs_VerifyBlock(dev,bi,i); */
+ 
+-			if(bi->gcPrioritise) {
++			if (bi->gcPrioritise) {
+ 				pendingPrioritisedExist = 1;
+-				if(bi->blockState == YAFFS_BLOCK_STATE_FULL &&
+-				   yaffs_BlockNotDisqualifiedFromGC(dev, bi)){
++				if (bi->blockState == YAFFS_BLOCK_STATE_FULL &&
++				   yaffs_BlockNotDisqualifiedFromGC(dev, bi)) {
+ 					pagesInUse = (bi->pagesInUse - bi->softDeletions);
+ 					dirtiest = i;
+ 					prioritised = 1;
+@@ -2611,7 +2636,7 @@ static int yaffs_FindBlockForGarbageColl
+ 			}
+ 		}
+ 
+-		if(!pendingPrioritisedExist) /* None found, so we can clear this */
++		if (!pendingPrioritisedExist) /* None found, so we can clear this */
+ 			dev->hasPendingPrioritisedGCs = 0;
+ 	}
+ 
+@@ -2623,31 +2648,28 @@ static int yaffs_FindBlockForGarbageColl
+ 
+ 	dev->nonAggressiveSkip--;
+ 
+-	if (!aggressive && (dev->nonAggressiveSkip > 0)) {
++	if (!aggressive && (dev->nonAggressiveSkip > 0))
+ 		return -1;
+-	}
+ 
+-	if(!prioritised)
++	if (!prioritised)
+ 		pagesInUse =
+-	    		(aggressive) ? dev->nChunksPerBlock : YAFFS_PASSIVE_GC_CHUNKS + 1;
++			(aggressive) ? dev->nChunksPerBlock : YAFFS_PASSIVE_GC_CHUNKS + 1;
+ 
+-	if (aggressive) {
++	if (aggressive)
+ 		iterations =
+ 		    dev->internalEndBlock - dev->internalStartBlock + 1;
+-	} else {
++	else {
+ 		iterations =
+ 		    dev->internalEndBlock - dev->internalStartBlock + 1;
+ 		iterations = iterations / 16;
+-		if (iterations > 200) {
++		if (iterations > 200)
+ 			iterations = 200;
+-		}
+ 	}
+ 
+ 	for (i = 0; i <= iterations && pagesInUse > 0 && !prioritised; i++) {
+ 		b++;
+-		if (b < dev->internalStartBlock || b > dev->internalEndBlock) {
++		if (b < dev->internalStartBlock || b > dev->internalEndBlock)
+ 			b = dev->internalStartBlock;
+-		}
+ 
+ 		if (b < dev->internalStartBlock || b > dev->internalEndBlock) {
+ 			T(YAFFS_TRACE_ERROR,
+@@ -2657,17 +2679,9 @@ static int yaffs_FindBlockForGarbageColl
+ 
+ 		bi = yaffs_GetBlockInfo(dev, b);
+ 
+-#if 0
+-		if (bi->blockState == YAFFS_BLOCK_STATE_CHECKPOINT) {
+-			dirtiest = b;
+-			pagesInUse = 0;
+-		}
+-		else
+-#endif
+-
+ 		if (bi->blockState == YAFFS_BLOCK_STATE_FULL &&
+-		       (bi->pagesInUse - bi->softDeletions) < pagesInUse &&
+-		        yaffs_BlockNotDisqualifiedFromGC(dev, bi)) {
++			(bi->pagesInUse - bi->softDeletions) < pagesInUse &&
++				yaffs_BlockNotDisqualifiedFromGC(dev, bi)) {
+ 			dirtiest = b;
+ 			pagesInUse = (bi->pagesInUse - bi->softDeletions);
+ 		}
+@@ -2678,19 +2692,18 @@ static int yaffs_FindBlockForGarbageColl
+ 	if (dirtiest > 0) {
+ 		T(YAFFS_TRACE_GC,
+ 		  (TSTR("GC Selected block %d with %d free, prioritised:%d" TENDSTR), dirtiest,
+-		   dev->nChunksPerBlock - pagesInUse,prioritised));
++		   dev->nChunksPerBlock - pagesInUse, prioritised));
+ 	}
+ 
+ 	dev->oldestDirtySequence = 0;
+ 
+-	if (dirtiest > 0) {
++	if (dirtiest > 0)
+ 		dev->nonAggressiveSkip = 4;
+-	}
+ 
+ 	return dirtiest;
+ }
+ 
+-static void yaffs_BlockBecameDirty(yaffs_Device * dev, int blockNo)
++static void yaffs_BlockBecameDirty(yaffs_Device *dev, int blockNo)
+ {
+ 	yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, blockNo);
+ 
+@@ -2752,7 +2765,7 @@ static void yaffs_BlockBecameDirty(yaffs
+ 	}
+ }
+ 
+-static int yaffs_FindBlockForAllocation(yaffs_Device * dev)
++static int yaffs_FindBlockForAllocation(yaffs_Device *dev)
+ {
+ 	int i;
+ 
+@@ -2763,7 +2776,7 @@ static int yaffs_FindBlockForAllocation(
+ 		 * Can't get space to gc
+ 		 */
+ 		T(YAFFS_TRACE_ERROR,
+-		  (TSTR("yaffs tragedy: no more eraased blocks" TENDSTR)));
++		  (TSTR("yaffs tragedy: no more erased blocks" TENDSTR)));
+ 
+ 		return -1;
+ 	}
+@@ -2794,31 +2807,74 @@ static int yaffs_FindBlockForAllocation(
+ 
+ 	T(YAFFS_TRACE_ALWAYS,
+ 	  (TSTR
+-	   ("yaffs tragedy: no more eraased blocks, but there should have been %d"
++	   ("yaffs tragedy: no more erased blocks, but there should have been %d"
+ 	    TENDSTR), dev->nErasedBlocks));
+ 
+ 	return -1;
+ }
+ 
+ 
+-// Check if there's space to allocate...
+-// Thinks.... do we need top make this ths same as yaffs_GetFreeChunks()?
+-static int yaffs_CheckSpaceForAllocation(yaffs_Device * dev)
++
++static int yaffs_CalcCheckpointBlocksRequired(yaffs_Device *dev)
++{
++	if (!dev->nCheckpointBlocksRequired &&
++	   dev->isYaffs2) {
++		/* Not a valid value so recalculate */
++		int nBytes = 0;
++		int nBlocks;
++		int devBlocks = (dev->endBlock - dev->startBlock + 1);
++		int tnodeSize;
++
++		tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
++
++		if (tnodeSize < sizeof(yaffs_Tnode))
++			tnodeSize = sizeof(yaffs_Tnode);
++
++		nBytes += sizeof(yaffs_CheckpointValidity);
++		nBytes += sizeof(yaffs_CheckpointDevice);
++		nBytes += devBlocks * sizeof(yaffs_BlockInfo);
++		nBytes += devBlocks * dev->chunkBitmapStride;
++		nBytes += (sizeof(yaffs_CheckpointObject) + sizeof(__u32)) * (dev->nObjectsCreated - dev->nFreeObjects);
++		nBytes += (tnodeSize + sizeof(__u32)) * (dev->nTnodesCreated - dev->nFreeTnodes);
++		nBytes += sizeof(yaffs_CheckpointValidity);
++		nBytes += sizeof(__u32); /* checksum*/
++
++		/* Round up and add 2 blocks to allow for some bad blocks, so add 3 */
++
++		nBlocks = (nBytes/(dev->nDataBytesPerChunk * dev->nChunksPerBlock)) + 3;
++
++		dev->nCheckpointBlocksRequired = nBlocks;
++	}
++
++	return dev->nCheckpointBlocksRequired;
++}
++
++/*
++ * Check if there's space to allocate...
++ * Thinks.... do we need top make this ths same as yaffs_GetFreeChunks()?
++ */
++static int yaffs_CheckSpaceForAllocation(yaffs_Device *dev)
+ {
+ 	int reservedChunks;
+ 	int reservedBlocks = dev->nReservedBlocks;
+ 	int checkpointBlocks;
+ 
+-	checkpointBlocks =  dev->nCheckpointReservedBlocks - dev->blocksInCheckpoint;
+-	if(checkpointBlocks < 0)
++	if (dev->isYaffs2) {
++		checkpointBlocks =  yaffs_CalcCheckpointBlocksRequired(dev) -
++				    dev->blocksInCheckpoint;
++		if (checkpointBlocks < 0)
++			checkpointBlocks = 0;
++	} else {
+ 		checkpointBlocks = 0;
++	}
+ 
+ 	reservedChunks = ((reservedBlocks + checkpointBlocks) * dev->nChunksPerBlock);
+ 
+ 	return (dev->nFreeChunks > reservedChunks);
+ }
+ 
+-static int yaffs_AllocateChunk(yaffs_Device * dev, int useReserve, yaffs_BlockInfo **blockUsedPtr)
++static int yaffs_AllocateChunk(yaffs_Device *dev, int useReserve,
++		yaffs_BlockInfo **blockUsedPtr)
+ {
+ 	int retVal;
+ 	yaffs_BlockInfo *bi;
+@@ -2835,7 +2891,7 @@ static int yaffs_AllocateChunk(yaffs_Dev
+ 	}
+ 
+ 	if (dev->nErasedBlocks < dev->nReservedBlocks
+-	    && dev->allocationPage == 0) {
++			&& dev->allocationPage == 0) {
+ 		T(YAFFS_TRACE_ALLOCATE, (TSTR("Allocating reserve" TENDSTR)));
+ 	}
+ 
+@@ -2844,10 +2900,10 @@ static int yaffs_AllocateChunk(yaffs_Dev
+ 		bi = yaffs_GetBlockInfo(dev, dev->allocationBlock);
+ 
+ 		retVal = (dev->allocationBlock * dev->nChunksPerBlock) +
+-		    dev->allocationPage;
++			dev->allocationPage;
+ 		bi->pagesInUse++;
+ 		yaffs_SetChunkBit(dev, dev->allocationBlock,
+-				  dev->allocationPage);
++				dev->allocationPage);
+ 
+ 		dev->allocationPage++;
+ 
+@@ -2859,43 +2915,43 @@ static int yaffs_AllocateChunk(yaffs_Dev
+ 			dev->allocationBlock = -1;
+ 		}
+ 
+-		if(blockUsedPtr)
++		if (blockUsedPtr)
+ 			*blockUsedPtr = bi;
+ 
+ 		return retVal;
+ 	}
+ 
+ 	T(YAFFS_TRACE_ERROR,
+-	  (TSTR("!!!!!!!!! Allocator out !!!!!!!!!!!!!!!!!" TENDSTR)));
++			(TSTR("!!!!!!!!! Allocator out !!!!!!!!!!!!!!!!!" TENDSTR)));
+ 
+ 	return -1;
+ }
+ 
+-static int yaffs_GetErasedChunks(yaffs_Device * dev)
++static int yaffs_GetErasedChunks(yaffs_Device *dev)
+ {
+ 	int n;
+ 
+ 	n = dev->nErasedBlocks * dev->nChunksPerBlock;
+ 
+-	if (dev->allocationBlock > 0) {
++	if (dev->allocationBlock > 0)
+ 		n += (dev->nChunksPerBlock - dev->allocationPage);
+-	}
+ 
+ 	return n;
+ 
+ }
+ 
+-static int yaffs_GarbageCollectBlock(yaffs_Device * dev, int block)
++static int yaffs_GarbageCollectBlock(yaffs_Device *dev, int block,
++		int wholeBlock)
+ {
+ 	int oldChunk;
+ 	int newChunk;
+-	int chunkInBlock;
+ 	int markNAND;
+ 	int retVal = YAFFS_OK;
+ 	int cleanups = 0;
+ 	int i;
+ 	int isCheckpointBlock;
+ 	int matchingChunk;
++	int maxCopies;
+ 
+ 	int chunksBefore = yaffs_GetErasedChunks(dev);
+ 	int chunksAfter;
+@@ -2911,8 +2967,11 @@ static int yaffs_GarbageCollectBlock(yaf
+ 	bi->blockState = YAFFS_BLOCK_STATE_COLLECTING;
+ 
+ 	T(YAFFS_TRACE_TRACING,
+-	  (TSTR("Collecting block %d, in use %d, shrink %d, " TENDSTR), block,
+-	   bi->pagesInUse, bi->hasShrinkHeader));
++			(TSTR("Collecting block %d, in use %d, shrink %d, wholeBlock %d" TENDSTR),
++			 block,
++			 bi->pagesInUse,
++			 bi->hasShrinkHeader,
++			 wholeBlock));
+ 
+ 	/*yaffs_VerifyFreeChunks(dev); */
+ 
+@@ -2926,26 +2985,33 @@ static int yaffs_GarbageCollectBlock(yaf
+ 	dev->isDoingGC = 1;
+ 
+ 	if (isCheckpointBlock ||
+-	    !yaffs_StillSomeChunkBits(dev, block)) {
++			!yaffs_StillSomeChunkBits(dev, block)) {
+ 		T(YAFFS_TRACE_TRACING,
+-		  (TSTR
+-		   ("Collecting block %d that has no chunks in use" TENDSTR),
+-		   block));
++				(TSTR
++				 ("Collecting block %d that has no chunks in use" TENDSTR),
++				 block));
+ 		yaffs_BlockBecameDirty(dev, block);
+ 	} else {
+ 
+ 		__u8 *buffer = yaffs_GetTempBuffer(dev, __LINE__);
+ 
+-		yaffs_VerifyBlock(dev,bi,block);
++		yaffs_VerifyBlock(dev, bi, block);
+ 
+-		for (chunkInBlock = 0, oldChunk = block * dev->nChunksPerBlock;
+-		     chunkInBlock < dev->nChunksPerBlock
+-		     && yaffs_StillSomeChunkBits(dev, block);
+-		     chunkInBlock++, oldChunk++) {
+-			if (yaffs_CheckChunkBit(dev, block, chunkInBlock)) {
++		maxCopies = (wholeBlock) ? dev->nChunksPerBlock : 10;
++		oldChunk = block * dev->nChunksPerBlock + dev->gcChunk;
++
++		for (/* init already done */;
++		     retVal == YAFFS_OK &&
++		     dev->gcChunk < dev->nChunksPerBlock &&
++		     (bi->blockState == YAFFS_BLOCK_STATE_COLLECTING) &&
++		     maxCopies > 0;
++		     dev->gcChunk++, oldChunk++) {
++			if (yaffs_CheckChunkBit(dev, block, dev->gcChunk)) {
+ 
+ 				/* This page is in use and might need to be copied off */
+ 
++				maxCopies--;
++
+ 				markNAND = 1;
+ 
+ 				yaffs_InitialiseTags(&tags);
+@@ -2959,22 +3025,22 @@ static int yaffs_GarbageCollectBlock(yaf
+ 
+ 				T(YAFFS_TRACE_GC_DETAIL,
+ 				  (TSTR
+-				   ("Collecting page %d, %d %d %d " TENDSTR),
+-				   chunkInBlock, tags.objectId, tags.chunkId,
++				   ("Collecting chunk in block %d, %d %d %d " TENDSTR),
++				   dev->gcChunk, tags.objectId, tags.chunkId,
+ 				   tags.byteCount));
+ 
+-				if(object && !yaffs_SkipVerification(dev)){
+-					if(tags.chunkId == 0)
+-						matchingChunk = object->chunkId;
+-					else if(object->softDeleted)
++				if (object && !yaffs_SkipVerification(dev)) {
++					if (tags.chunkId == 0)
++						matchingChunk = object->hdrChunk;
++					else if (object->softDeleted)
+ 						matchingChunk = oldChunk; /* Defeat the test */
+ 					else
+-						matchingChunk = yaffs_FindChunkInFile(object,tags.chunkId,NULL);
++						matchingChunk = yaffs_FindChunkInFile(object, tags.chunkId, NULL);
+ 
+-					if(oldChunk != matchingChunk)
++					if (oldChunk != matchingChunk)
+ 						T(YAFFS_TRACE_ERROR,
+ 						  (TSTR("gc: page in gc mismatch: %d %d %d %d"TENDSTR),
+-						  oldChunk,matchingChunk,tags.objectId, tags.chunkId));
++						  oldChunk, matchingChunk, tags.objectId, tags.chunkId));
+ 
+ 				}
+ 
+@@ -2986,9 +3052,11 @@ static int yaffs_GarbageCollectBlock(yaf
+ 					    tags.objectId, tags.chunkId, tags.byteCount));
+ 				}
+ 
+-				if (object && object->deleted
+-				    && tags.chunkId != 0) {
+-					/* Data chunk in a deleted file, throw it away
++				if (object &&
++				    object->deleted &&
++				    object->softDeleted &&
++				    tags.chunkId != 0) {
++					/* Data chunk in a soft deleted file, throw it away
+ 					 * It's a soft deleted data chunk,
+ 					 * No need to copy this, just forget about it and
+ 					 * fix up the object.
+@@ -3003,13 +3071,12 @@ static int yaffs_GarbageCollectBlock(yaf
+ 						cleanups++;
+ 					}
+ 					markNAND = 0;
+-				} else if (0
+-					   /* Todo object && object->deleted && object->nDataChunks == 0 */
+-					   ) {
++				} else if (0) {
++					/* Todo object && object->deleted && object->nDataChunks == 0 */
+ 					/* Deleted object header with no data chunks.
+ 					 * Can be discarded and the file deleted.
+ 					 */
+-					object->chunkId = 0;
++					object->hdrChunk = 0;
+ 					yaffs_FreeTnode(object->myDev,
+ 							object->variant.
+ 							fileVariant.top);
+@@ -3031,17 +3098,14 @@ static int yaffs_GarbageCollectBlock(yaf
+ 						 * We need to nuke the shrinkheader flags first
+ 						 * We no longer want the shrinkHeader flag since its work is done
+ 						 * and if it is left in place it will mess up scanning.
+-						 * Also, clear out any shadowing stuff
+ 						 */
+ 
+ 						yaffs_ObjectHeader *oh;
+ 						oh = (yaffs_ObjectHeader *)buffer;
+ 						oh->isShrink = 0;
+-						oh->shadowsObject = -1;
+-						tags.extraShadows = 0;
+ 						tags.extraIsShrinkHeader = 0;
+ 
+-						yaffs_VerifyObjectHeader(object,oh,&tags,1);
++						yaffs_VerifyObjectHeader(object, oh, &tags, 1);
+ 					}
+ 
+ 					newChunk =
+@@ -3055,7 +3119,7 @@ static int yaffs_GarbageCollectBlock(yaf
+ 
+ 						if (tags.chunkId == 0) {
+ 							/* It's a header */
+-							object->chunkId =  newChunk;
++							object->hdrChunk =  newChunk;
+ 							object->serial =   tags.serialNumber;
+ 						} else {
+ 							/* It's a data chunk */
+@@ -3067,7 +3131,8 @@ static int yaffs_GarbageCollectBlock(yaf
+ 					}
+ 				}
+ 
+-				yaffs_DeleteChunk(dev, oldChunk, markNAND, __LINE__);
++				if (retVal == YAFFS_OK)
++					yaffs_DeleteChunk(dev, oldChunk, markNAND, __LINE__);
+ 
+ 			}
+ 		}
+@@ -3098,18 +3163,25 @@ static int yaffs_GarbageCollectBlock(yaf
+ 
+ 	}
+ 
+-	yaffs_VerifyCollectedBlock(dev,bi,block);
++	yaffs_VerifyCollectedBlock(dev, bi, block);
+ 
+-	if (chunksBefore >= (chunksAfter = yaffs_GetErasedChunks(dev))) {
++	chunksAfter = yaffs_GetErasedChunks(dev);
++	if (chunksBefore >= chunksAfter) {
+ 		T(YAFFS_TRACE_GC,
+ 		  (TSTR
+ 		   ("gc did not increase free chunks before %d after %d"
+ 		    TENDSTR), chunksBefore, chunksAfter));
+ 	}
+ 
++	/* If the gc completed then clear the current gcBlock so that we find another. */
++	if (bi->blockState != YAFFS_BLOCK_STATE_COLLECTING) {
++		dev->gcBlock = -1;
++		dev->gcChunk = 0;
++	}
++
+ 	dev->isDoingGC = 0;
+ 
+-	return YAFFS_OK;
++	return retVal;
+ }
+ 
+ /* New garbage collector
+@@ -3121,7 +3193,7 @@ static int yaffs_GarbageCollectBlock(yaf
+  * The idea is to help clear out space in a more spread-out manner.
+  * Dunno if it really does anything useful.
+  */
+-static int yaffs_CheckGarbageCollection(yaffs_Device * dev)
++static int yaffs_CheckGarbageCollection(yaffs_Device *dev)
+ {
+ 	int block;
+ 	int aggressive;
+@@ -3142,8 +3214,8 @@ static int yaffs_CheckGarbageCollection(
+ 	do {
+ 		maxTries++;
+ 
+-		checkpointBlockAdjust = (dev->nCheckpointReservedBlocks - dev->blocksInCheckpoint);
+-		if(checkpointBlockAdjust < 0)
++		checkpointBlockAdjust = yaffs_CalcCheckpointBlocksRequired(dev) - dev->blocksInCheckpoint;
++		if (checkpointBlockAdjust < 0)
+ 			checkpointBlockAdjust = 0;
+ 
+ 		if (dev->nErasedBlocks < (dev->nReservedBlocks + checkpointBlockAdjust + 2)) {
+@@ -3154,20 +3226,24 @@ static int yaffs_CheckGarbageCollection(
+ 			aggressive = 0;
+ 		}
+ 
+-		block = yaffs_FindBlockForGarbageCollection(dev, aggressive);
++		if (dev->gcBlock <= 0) {
++			dev->gcBlock = yaffs_FindBlockForGarbageCollection(dev, aggressive);
++			dev->gcChunk = 0;
++		}
++
++		block = dev->gcBlock;
+ 
+ 		if (block > 0) {
+ 			dev->garbageCollections++;
+-			if (!aggressive) {
++			if (!aggressive)
+ 				dev->passiveGarbageCollections++;
+-			}
+ 
+ 			T(YAFFS_TRACE_GC,
+ 			  (TSTR
+ 			   ("yaffs: GC erasedBlocks %d aggressive %d" TENDSTR),
+ 			   dev->nErasedBlocks, aggressive));
+ 
+-			gcOk = yaffs_GarbageCollectBlock(dev, block);
++			gcOk = yaffs_GarbageCollectBlock(dev, block, aggressive);
+ 		}
+ 
+ 		if (dev->nErasedBlocks < (dev->nReservedBlocks) && block > 0) {
+@@ -3176,15 +3252,16 @@ static int yaffs_CheckGarbageCollection(
+ 			   ("yaffs: GC !!!no reclaim!!! erasedBlocks %d after try %d block %d"
+ 			    TENDSTR), dev->nErasedBlocks, maxTries, block));
+ 		}
+-	} while ((dev->nErasedBlocks < dev->nReservedBlocks) && (block > 0)
+-		 && (maxTries < 2));
++	} while ((dev->nErasedBlocks < dev->nReservedBlocks) &&
++		 (block > 0) &&
++		 (maxTries < 2));
+ 
+ 	return aggressive ? gcOk : YAFFS_OK;
+ }
+ 
+ /*-------------------------  TAGS --------------------------------*/
+ 
+-static int yaffs_TagsMatch(const yaffs_ExtendedTags * tags, int objectId,
++static int yaffs_TagsMatch(const yaffs_ExtendedTags *tags, int objectId,
+ 			   int chunkInObject)
+ {
+ 	return (tags->chunkId == chunkInObject &&
+@@ -3195,8 +3272,8 @@ static int yaffs_TagsMatch(const yaffs_E
+ 
+ /*-------------------- Data file manipulation -----------------*/
+ 
+-static int yaffs_FindChunkInFile(yaffs_Object * in, int chunkInInode,
+-				 yaffs_ExtendedTags * tags)
++static int yaffs_FindChunkInFile(yaffs_Object *in, int chunkInInode,
++				 yaffs_ExtendedTags *tags)
+ {
+ 	/*Get the Tnode, then get the level 0 offset chunk offset */
+ 	yaffs_Tnode *tn;
+@@ -3214,7 +3291,7 @@ static int yaffs_FindChunkInFile(yaffs_O
+ 	tn = yaffs_FindLevel0Tnode(dev, &in->variant.fileVariant, chunkInInode);
+ 
+ 	if (tn) {
+-		theChunk = yaffs_GetChunkGroupBase(dev,tn,chunkInInode);
++		theChunk = yaffs_GetChunkGroupBase(dev, tn, chunkInInode);
+ 
+ 		retVal =
+ 		    yaffs_FindChunkInGroup(dev, theChunk, tags, in->objectId,
+@@ -3223,8 +3300,8 @@ static int yaffs_FindChunkInFile(yaffs_O
+ 	return retVal;
+ }
+ 
+-static int yaffs_FindAndDeleteChunkInFile(yaffs_Object * in, int chunkInInode,
+-					  yaffs_ExtendedTags * tags)
++static int yaffs_FindAndDeleteChunkInFile(yaffs_Object *in, int chunkInInode,
++					  yaffs_ExtendedTags *tags)
+ {
+ 	/* Get the Tnode, then get the level 0 offset chunk offset */
+ 	yaffs_Tnode *tn;
+@@ -3243,29 +3320,23 @@ static int yaffs_FindAndDeleteChunkInFil
+ 
+ 	if (tn) {
+ 
+-		theChunk = yaffs_GetChunkGroupBase(dev,tn,chunkInInode);
++		theChunk = yaffs_GetChunkGroupBase(dev, tn, chunkInInode);
+ 
+ 		retVal =
+ 		    yaffs_FindChunkInGroup(dev, theChunk, tags, in->objectId,
+ 					   chunkInInode);
+ 
+ 		/* Delete the entry in the filestructure (if found) */
+-		if (retVal != -1) {
+-			yaffs_PutLevel0Tnode(dev,tn,chunkInInode,0);
+-		}
+-	} else {
+-		/*T(("No level 0 found for %d\n", chunkInInode)); */
++		if (retVal != -1)
++			yaffs_PutLevel0Tnode(dev, tn, chunkInInode, 0);
+ 	}
+ 
+-	if (retVal == -1) {
+-		/* T(("Could not find %d to delete\n",chunkInInode)); */
+-	}
+ 	return retVal;
+ }
+ 
+ #ifdef YAFFS_PARANOID
+ 
+-static int yaffs_CheckFileSanity(yaffs_Object * in)
++static int yaffs_CheckFileSanity(yaffs_Object *in)
+ {
+ 	int chunk;
+ 	int nChunks;
+@@ -3278,10 +3349,8 @@ static int yaffs_CheckFileSanity(yaffs_O
+ 	int theChunk;
+ 	int chunkDeleted;
+ 
+-	if (in->variantType != YAFFS_OBJECT_TYPE_FILE) {
+-		/* T(("Object not a file\n")); */
++	if (in->variantType != YAFFS_OBJECT_TYPE_FILE)
+ 		return YAFFS_FAIL;
+-	}
+ 
+ 	objId = in->objectId;
+ 	fSize = in->variant.fileVariant.fileSize;
+@@ -3294,7 +3363,7 @@ static int yaffs_CheckFileSanity(yaffs_O
+ 
+ 		if (tn) {
+ 
+-			theChunk = yaffs_GetChunkGroupBase(dev,tn,chunk);
++			theChunk = yaffs_GetChunkGroupBase(dev, tn, chunk);
+ 
+ 			if (yaffs_CheckChunkBits
+ 			    (dev, theChunk / dev->nChunksPerBlock,
+@@ -3323,7 +3392,7 @@ static int yaffs_CheckFileSanity(yaffs_O
+ 
+ #endif
+ 
+-static int yaffs_PutChunkIntoFile(yaffs_Object * in, int chunkInInode,
++static int yaffs_PutChunkIntoFile(yaffs_Object *in, int chunkInInode,
+ 				  int chunkInNAND, int inScan)
+ {
+ 	/* NB inScan is zero unless scanning.
+@@ -3358,11 +3427,10 @@ static int yaffs_PutChunkIntoFile(yaffs_
+ 					&in->variant.fileVariant,
+ 					chunkInInode,
+ 					NULL);
+-	if (!tn) {
++	if (!tn)
+ 		return YAFFS_FAIL;
+-	}
+ 
+-	existingChunk = yaffs_GetChunkGroupBase(dev,tn,chunkInInode);
++	existingChunk = yaffs_GetChunkGroupBase(dev, tn, chunkInInode);
+ 
+ 	if (inScan != 0) {
+ 		/* If we're scanning then we need to test for duplicates
+@@ -3374,7 +3442,7 @@ static int yaffs_PutChunkIntoFile(yaffs_
+ 		 * Update: For backward scanning we don't need to re-read tags so this is quite cheap.
+ 		 */
+ 
+-		if (existingChunk != 0) {
++		if (existingChunk > 0) {
+ 			/* NB Right now existing chunk will not be real chunkId if the device >= 32MB
+ 			 *    thus we have to do a FindChunkInFile to get the real chunk id.
+ 			 *
+@@ -3411,8 +3479,10 @@ static int yaffs_PutChunkIntoFile(yaffs_
+ 			 * not be loaded during a scan
+ 			 */
+ 
+-			newSerial = newTags.serialNumber;
+-			existingSerial = existingTags.serialNumber;
++			if (inScan > 0) {
++				newSerial = newTags.serialNumber;
++				existingSerial = existingTags.serialNumber;
++			}
+ 
+ 			if ((inScan > 0) &&
+ 			    (in->myDev->isYaffs2 ||
+@@ -3437,24 +3507,23 @@ static int yaffs_PutChunkIntoFile(yaffs_
+ 
+ 	}
+ 
+-	if (existingChunk == 0) {
++	if (existingChunk == 0)
+ 		in->nDataChunks++;
+-	}
+ 
+-	yaffs_PutLevel0Tnode(dev,tn,chunkInInode,chunkInNAND);
++	yaffs_PutLevel0Tnode(dev, tn, chunkInInode, chunkInNAND);
+ 
+ 	return YAFFS_OK;
+ }
+ 
+-static int yaffs_ReadChunkDataFromObject(yaffs_Object * in, int chunkInInode,
+-					 __u8 * buffer)
++static int yaffs_ReadChunkDataFromObject(yaffs_Object *in, int chunkInInode,
++					__u8 *buffer)
+ {
+ 	int chunkInNAND = yaffs_FindChunkInFile(in, chunkInInode, NULL);
+ 
+-	if (chunkInNAND >= 0) {
++	if (chunkInNAND >= 0)
+ 		return yaffs_ReadChunkWithTagsFromNAND(in->myDev, chunkInNAND,
+-						       buffer,NULL);
+-	} else {
++						buffer, NULL);
++	else {
+ 		T(YAFFS_TRACE_NANDACCESS,
+ 		  (TSTR("Chunk %d not found zero instead" TENDSTR),
+ 		   chunkInNAND));
+@@ -3465,7 +3534,7 @@ static int yaffs_ReadChunkDataFromObject
+ 
+ }
+ 
+-void yaffs_DeleteChunk(yaffs_Device * dev, int chunkId, int markNAND, int lyn)
++void yaffs_DeleteChunk(yaffs_Device *dev, int chunkId, int markNAND, int lyn)
+ {
+ 	int block;
+ 	int page;
+@@ -3475,16 +3544,15 @@ void yaffs_DeleteChunk(yaffs_Device * de
+ 	if (chunkId <= 0)
+ 		return;
+ 
+-
+ 	dev->nDeletions++;
+ 	block = chunkId / dev->nChunksPerBlock;
+ 	page = chunkId % dev->nChunksPerBlock;
+ 
+ 
+-	if(!yaffs_CheckChunkBit(dev,block,page))
++	if (!yaffs_CheckChunkBit(dev, block, page))
+ 		T(YAFFS_TRACE_VERIFY,
+-		 	(TSTR("Deleting invalid chunk %d"TENDSTR),
+-		 	 chunkId));
++			(TSTR("Deleting invalid chunk %d"TENDSTR),
++			 chunkId));
+ 
+ 	bi = yaffs_GetBlockInfo(dev, block);
+ 
+@@ -3524,14 +3592,12 @@ void yaffs_DeleteChunk(yaffs_Device * de
+ 			yaffs_BlockBecameDirty(dev, block);
+ 		}
+ 
+-	} else {
+-		/* T(("Bad news deleting chunk %d\n",chunkId)); */
+ 	}
+ 
+ }
+ 
+-static int yaffs_WriteChunkDataToObject(yaffs_Object * in, int chunkInInode,
+-					const __u8 * buffer, int nBytes,
++static int yaffs_WriteChunkDataToObject(yaffs_Object *in, int chunkInInode,
++					const __u8 *buffer, int nBytes,
+ 					int useReserve)
+ {
+ 	/* Find old chunk Need to do this to get serial number
+@@ -3561,6 +3627,12 @@ static int yaffs_WriteChunkDataToObject(
+ 	    (prevChunkId >= 0) ? prevTags.serialNumber + 1 : 1;
+ 	newTags.byteCount = nBytes;
+ 
++	if (nBytes < 1 || nBytes > dev->totalBytesPerChunk) {
++		T(YAFFS_TRACE_ERROR,
++		(TSTR("Writing %d bytes to chunk!!!!!!!!!" TENDSTR), nBytes));
++		YBUG();
++	}
++
+ 	newChunkId =
+ 	    yaffs_WriteNewChunkWithTagsToNAND(dev, buffer, &newTags,
+ 					      useReserve);
+@@ -3568,11 +3640,9 @@ static int yaffs_WriteChunkDataToObject(
+ 	if (newChunkId >= 0) {
+ 		yaffs_PutChunkIntoFile(in, chunkInInode, newChunkId, 0);
+ 
+-		if (prevChunkId >= 0) {
++		if (prevChunkId >= 0)
+ 			yaffs_DeleteChunk(dev, prevChunkId, 1, __LINE__);
+ 
+-		}
+-
+ 		yaffs_CheckFileSanity(in);
+ 	}
+ 	return newChunkId;
+@@ -3582,7 +3652,7 @@ static int yaffs_WriteChunkDataToObject(
+ /* UpdateObjectHeader updates the header on NAND for an object.
+  * If name is not NULL, then that new name is used.
+  */
+-int yaffs_UpdateObjectHeader(yaffs_Object * in, const YCHAR * name, int force,
++int yaffs_UpdateObjectHeader(yaffs_Object *in, const YCHAR *name, int force,
+ 			     int isShrink, int shadows)
+ {
+ 
+@@ -3603,9 +3673,12 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 
+ 	yaffs_ObjectHeader *oh = NULL;
+ 
+-	yaffs_strcpy(oldName,"silly old name");
++	yaffs_strcpy(oldName, _Y("silly old name"));
+ 
+-	if (!in->fake || force) {
++
++	if (!in->fake ||
++		in == dev->rootDir || /* The rootDir should also be saved */
++		force) {
+ 
+ 		yaffs_CheckGarbageCollection(dev);
+ 		yaffs_CheckObjectDetailsLoaded(in);
+@@ -3613,13 +3686,13 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 		buffer = yaffs_GetTempBuffer(in->myDev, __LINE__);
+ 		oh = (yaffs_ObjectHeader *) buffer;
+ 
+-		prevChunkId = in->chunkId;
++		prevChunkId = in->hdrChunk;
+ 
+-		if (prevChunkId >= 0) {
++		if (prevChunkId > 0) {
+ 			result = yaffs_ReadChunkWithTagsFromNAND(dev, prevChunkId,
+ 							buffer, &oldTags);
+ 
+-			yaffs_VerifyObjectHeader(in,oh,&oldTags,0);
++			yaffs_VerifyObjectHeader(in, oh, &oldTags, 0);
+ 
+ 			memcpy(oldName, oh->name, sizeof(oh->name));
+ 		}
+@@ -3628,7 +3701,7 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 
+ 		oh->type = in->variantType;
+ 		oh->yst_mode = in->yst_mode;
+-		oh->shadowsObject = shadows;
++		oh->shadowsObject = oh->inbandShadowsObject = shadows;
+ 
+ #ifdef CONFIG_YAFFS_WINCE
+ 		oh->win_atime[0] = in->win_atime[0];
+@@ -3645,20 +3718,18 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 		oh->yst_ctime = in->yst_ctime;
+ 		oh->yst_rdev = in->yst_rdev;
+ #endif
+-		if (in->parent) {
++		if (in->parent)
+ 			oh->parentObjectId = in->parent->objectId;
+-		} else {
++		else
+ 			oh->parentObjectId = 0;
+-		}
+ 
+ 		if (name && *name) {
+ 			memset(oh->name, 0, sizeof(oh->name));
+ 			yaffs_strncpy(oh->name, name, YAFFS_MAX_NAME_LENGTH);
+-		} else if (prevChunkId>=0) {
++		} else if (prevChunkId >= 0)
+ 			memcpy(oh->name, oldName, sizeof(oh->name));
+-		} else {
++		else
+ 			memset(oh->name, 0, sizeof(oh->name));
+-		}
+ 
+ 		oh->isShrink = isShrink;
+ 
+@@ -3708,7 +3779,7 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 		newTags.extraShadows = (oh->shadowsObject > 0) ? 1 : 0;
+ 		newTags.extraObjectType = in->variantType;
+ 
+-		yaffs_VerifyObjectHeader(in,oh,&newTags,1);
++		yaffs_VerifyObjectHeader(in, oh, &newTags, 1);
+ 
+ 		/* Create new chunk in NAND */
+ 		newChunkId =
+@@ -3717,20 +3788,20 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 
+ 		if (newChunkId >= 0) {
+ 
+-			in->chunkId = newChunkId;
++			in->hdrChunk = newChunkId;
+ 
+ 			if (prevChunkId >= 0) {
+ 				yaffs_DeleteChunk(dev, prevChunkId, 1,
+ 						  __LINE__);
+ 			}
+ 
+-			if(!yaffs_ObjectHasCachedWriteData(in))
++			if (!yaffs_ObjectHasCachedWriteData(in))
+ 				in->dirty = 0;
+ 
+ 			/* If this was a shrink, then mark the block that the chunk lives on */
+ 			if (isShrink) {
+ 				bi = yaffs_GetBlockInfo(in->myDev,
+-							newChunkId /in->myDev->	nChunksPerBlock);
++					newChunkId / in->myDev->nChunksPerBlock);
+ 				bi->hasShrinkHeader = 1;
+ 			}
+ 
+@@ -3766,7 +3837,7 @@ static int yaffs_ObjectHasCachedWriteDat
+ 	yaffs_ChunkCache *cache;
+ 	int nCaches = obj->myDev->nShortOpCaches;
+ 
+-	for(i = 0; i < nCaches; i++){
++	for (i = 0; i < nCaches; i++) {
+ 		cache = &dev->srCache[i];
+ 		if (cache->object == obj &&
+ 		    cache->dirty)
+@@ -3777,7 +3848,7 @@ static int yaffs_ObjectHasCachedWriteDat
+ }
+ 
+ 
+-static void yaffs_FlushFilesChunkCache(yaffs_Object * obj)
++static void yaffs_FlushFilesChunkCache(yaffs_Object *obj)
+ {
+ 	yaffs_Device *dev = obj->myDev;
+ 	int lowest = -99;	/* Stop compiler whining. */
+@@ -3844,16 +3915,16 @@ void yaffs_FlushEntireDeviceCache(yaffs_
+ 	 */
+ 	do {
+ 		obj = NULL;
+-		for( i = 0; i < nCaches && !obj; i++) {
++		for (i = 0; i < nCaches && !obj; i++) {
+ 			if (dev->srCache[i].object &&
+ 			    dev->srCache[i].dirty)
+ 				obj = dev->srCache[i].object;
+ 
+ 		}
+-		if(obj)
++		if (obj)
+ 			yaffs_FlushFilesChunkCache(obj);
+ 
+-	} while(obj);
++	} while (obj);
+ 
+ }
+ 
+@@ -3863,41 +3934,21 @@ void yaffs_FlushEntireDeviceCache(yaffs_
+  * Then look for the least recently used non-dirty one.
+  * Then look for the least recently used dirty one...., flush and look again.
+  */
+-static yaffs_ChunkCache *yaffs_GrabChunkCacheWorker(yaffs_Device * dev)
++static yaffs_ChunkCache *yaffs_GrabChunkCacheWorker(yaffs_Device *dev)
+ {
+ 	int i;
+-	int usage;
+-	int theOne;
+ 
+ 	if (dev->nShortOpCaches > 0) {
+ 		for (i = 0; i < dev->nShortOpCaches; i++) {
+ 			if (!dev->srCache[i].object)
+ 				return &dev->srCache[i];
+ 		}
++	}
+ 
+-		return NULL;
++	return NULL;
++}
+ 
+-		theOne = -1;
+-		usage = 0;	/* just to stop the compiler grizzling */
+-
+-		for (i = 0; i < dev->nShortOpCaches; i++) {
+-			if (!dev->srCache[i].dirty &&
+-			    ((dev->srCache[i].lastUse < usage && theOne >= 0) ||
+-			     theOne < 0)) {
+-				usage = dev->srCache[i].lastUse;
+-				theOne = i;
+-			}
+-		}
+-
+-
+-		return theOne >= 0 ? &dev->srCache[theOne] : NULL;
+-	} else {
+-		return NULL;
+-	}
+-
+-}
+-
+-static yaffs_ChunkCache *yaffs_GrabChunkCache(yaffs_Device * dev)
++static yaffs_ChunkCache *yaffs_GrabChunkCache(yaffs_Device *dev)
+ {
+ 	yaffs_ChunkCache *cache;
+ 	yaffs_Object *theObj;
+@@ -3927,8 +3978,7 @@ static yaffs_ChunkCache *yaffs_GrabChunk
+ 			for (i = 0; i < dev->nShortOpCaches; i++) {
+ 				if (dev->srCache[i].object &&
+ 				    !dev->srCache[i].locked &&
+-				    (dev->srCache[i].lastUse < usage || !cache))
+-				{
++				    (dev->srCache[i].lastUse < usage || !cache)) {
+ 					usage = dev->srCache[i].lastUse;
+ 					theObj = dev->srCache[i].object;
+ 					cache = &dev->srCache[i];
+@@ -3950,7 +4000,7 @@ static yaffs_ChunkCache *yaffs_GrabChunk
+ }
+ 
+ /* Find a cached chunk */
+-static yaffs_ChunkCache *yaffs_FindChunkCache(const yaffs_Object * obj,
++static yaffs_ChunkCache *yaffs_FindChunkCache(const yaffs_Object *obj,
+ 					      int chunkId)
+ {
+ 	yaffs_Device *dev = obj->myDev;
+@@ -3969,7 +4019,7 @@ static yaffs_ChunkCache *yaffs_FindChunk
+ }
+ 
+ /* Mark the chunk for the least recently used algorithym */
+-static void yaffs_UseChunkCache(yaffs_Device * dev, yaffs_ChunkCache * cache,
++static void yaffs_UseChunkCache(yaffs_Device *dev, yaffs_ChunkCache *cache,
+ 				int isAWrite)
+ {
+ 
+@@ -3977,9 +4027,9 @@ static void yaffs_UseChunkCache(yaffs_De
+ 		if (dev->srLastUse < 0 || dev->srLastUse > 100000000) {
+ 			/* Reset the cache usages */
+ 			int i;
+-			for (i = 1; i < dev->nShortOpCaches; i++) {
++			for (i = 1; i < dev->nShortOpCaches; i++)
+ 				dev->srCache[i].lastUse = 0;
+-			}
++
+ 			dev->srLastUse = 0;
+ 		}
+ 
+@@ -3987,9 +4037,8 @@ static void yaffs_UseChunkCache(yaffs_De
+ 
+ 		cache->lastUse = dev->srLastUse;
+ 
+-		if (isAWrite) {
++		if (isAWrite)
+ 			cache->dirty = 1;
+-		}
+ 	}
+ }
+ 
+@@ -3997,21 +4046,20 @@ static void yaffs_UseChunkCache(yaffs_De
+  * Do this when a whole page gets written,
+  * ie the short cache for this page is no longer valid.
+  */
+-static void yaffs_InvalidateChunkCache(yaffs_Object * object, int chunkId)
++static void yaffs_InvalidateChunkCache(yaffs_Object *object, int chunkId)
+ {
+ 	if (object->myDev->nShortOpCaches > 0) {
+ 		yaffs_ChunkCache *cache = yaffs_FindChunkCache(object, chunkId);
+ 
+-		if (cache) {
++		if (cache)
+ 			cache->object = NULL;
+-		}
+ 	}
+ }
+ 
+ /* Invalidate all the cache pages associated with this object
+  * Do this whenever ther file is deleted or resized.
+  */
+-static void yaffs_InvalidateWholeChunkCache(yaffs_Object * in)
++static void yaffs_InvalidateWholeChunkCache(yaffs_Object *in)
+ {
+ 	int i;
+ 	yaffs_Device *dev = in->myDev;
+@@ -4019,9 +4067,8 @@ static void yaffs_InvalidateWholeChunkCa
+ 	if (dev->nShortOpCaches > 0) {
+ 		/* Invalidate it. */
+ 		for (i = 0; i < dev->nShortOpCaches; i++) {
+-			if (dev->srCache[i].object == in) {
++			if (dev->srCache[i].object == in)
+ 				dev->srCache[i].object = NULL;
+-			}
+ 		}
+ 	}
+ }
+@@ -4029,18 +4076,18 @@ static void yaffs_InvalidateWholeChunkCa
+ /*--------------------- Checkpointing --------------------*/
+ 
+ 
+-static int yaffs_WriteCheckpointValidityMarker(yaffs_Device *dev,int head)
++static int yaffs_WriteCheckpointValidityMarker(yaffs_Device *dev, int head)
+ {
+ 	yaffs_CheckpointValidity cp;
+ 
+-	memset(&cp,0,sizeof(cp));
++	memset(&cp, 0, sizeof(cp));
+ 
+ 	cp.structType = sizeof(cp);
+ 	cp.magic = YAFFS_MAGIC;
+ 	cp.version = YAFFS_CHECKPOINT_VERSION;
+ 	cp.head = (head) ? 1 : 0;
+ 
+-	return (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp))?
++	return (yaffs_CheckpointWrite(dev, &cp, sizeof(cp)) == sizeof(cp)) ?
+ 		1 : 0;
+ }
+ 
+@@ -4049,9 +4096,9 @@ static int yaffs_ReadCheckpointValidityM
+ 	yaffs_CheckpointValidity cp;
+ 	int ok;
+ 
+-	ok = (yaffs_CheckpointRead(dev,&cp,sizeof(cp)) == sizeof(cp));
++	ok = (yaffs_CheckpointRead(dev, &cp, sizeof(cp)) == sizeof(cp));
+ 
+-	if(ok)
++	if (ok)
+ 		ok = (cp.structType == sizeof(cp)) &&
+ 		     (cp.magic == YAFFS_MAGIC) &&
+ 		     (cp.version == YAFFS_CHECKPOINT_VERSION) &&
+@@ -4100,21 +4147,21 @@ static int yaffs_WriteCheckpointDevice(y
+ 	int ok;
+ 
+ 	/* Write device runtime values*/
+-	yaffs_DeviceToCheckpointDevice(&cp,dev);
++	yaffs_DeviceToCheckpointDevice(&cp, dev);
+ 	cp.structType = sizeof(cp);
+ 
+-	ok = (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp));
++	ok = (yaffs_CheckpointWrite(dev, &cp, sizeof(cp)) == sizeof(cp));
+ 
+ 	/* Write block info */
+-	if(ok) {
++	if (ok) {
+ 		nBytes = nBlocks * sizeof(yaffs_BlockInfo);
+-		ok = (yaffs_CheckpointWrite(dev,dev->blockInfo,nBytes) == nBytes);
++		ok = (yaffs_CheckpointWrite(dev, dev->blockInfo, nBytes) == nBytes);
+ 	}
+ 
+ 	/* Write chunk bits */
+-	if(ok) {
++	if (ok) {
+ 		nBytes = nBlocks * dev->chunkBitmapStride;
+-		ok = (yaffs_CheckpointWrite(dev,dev->chunkBits,nBytes) == nBytes);
++		ok = (yaffs_CheckpointWrite(dev, dev->chunkBits, nBytes) == nBytes);
+ 	}
+ 	return	 ok ? 1 : 0;
+ 
+@@ -4128,25 +4175,25 @@ static int yaffs_ReadCheckpointDevice(ya
+ 
+ 	int ok;
+ 
+-	ok = (yaffs_CheckpointRead(dev,&cp,sizeof(cp)) == sizeof(cp));
+-	if(!ok)
++	ok = (yaffs_CheckpointRead(dev, &cp, sizeof(cp)) == sizeof(cp));
++	if (!ok)
+ 		return 0;
+ 
+-	if(cp.structType != sizeof(cp))
++	if (cp.structType != sizeof(cp))
+ 		return 0;
+ 
+ 
+-	yaffs_CheckpointDeviceToDevice(dev,&cp);
++	yaffs_CheckpointDeviceToDevice(dev, &cp);
+ 
+ 	nBytes = nBlocks * sizeof(yaffs_BlockInfo);
+ 
+-	ok = (yaffs_CheckpointRead(dev,dev->blockInfo,nBytes) == nBytes);
++	ok = (yaffs_CheckpointRead(dev, dev->blockInfo, nBytes) == nBytes);
+ 
+-	if(!ok)
++	if (!ok)
+ 		return 0;
+ 	nBytes = nBlocks * dev->chunkBitmapStride;
+ 
+-	ok = (yaffs_CheckpointRead(dev,dev->chunkBits,nBytes) == nBytes);
++	ok = (yaffs_CheckpointRead(dev, dev->chunkBits, nBytes) == nBytes);
+ 
+ 	return ok ? 1 : 0;
+ }
+@@ -4157,7 +4204,7 @@ static void yaffs_ObjectToCheckpointObje
+ 
+ 	cp->objectId = obj->objectId;
+ 	cp->parentId = (obj->parent) ? obj->parent->objectId : 0;
+-	cp->chunkId = obj->chunkId;
++	cp->hdrChunk = obj->hdrChunk;
+ 	cp->variantType = obj->variantType;
+ 	cp->deleted = obj->deleted;
+ 	cp->softDeleted = obj->softDeleted;
+@@ -4168,20 +4215,28 @@ static void yaffs_ObjectToCheckpointObje
+ 	cp->serial = obj->serial;
+ 	cp->nDataChunks = obj->nDataChunks;
+ 
+-	if(obj->variantType == YAFFS_OBJECT_TYPE_FILE)
++	if (obj->variantType == YAFFS_OBJECT_TYPE_FILE)
+ 		cp->fileSizeOrEquivalentObjectId = obj->variant.fileVariant.fileSize;
+-	else if(obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK)
++	else if (obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK)
+ 		cp->fileSizeOrEquivalentObjectId = obj->variant.hardLinkVariant.equivalentObjectId;
+ }
+ 
+-static void yaffs_CheckpointObjectToObject( yaffs_Object *obj,yaffs_CheckpointObject *cp)
++static int yaffs_CheckpointObjectToObject(yaffs_Object *obj, yaffs_CheckpointObject *cp)
+ {
+ 
+ 	yaffs_Object *parent;
+ 
++	if (obj->variantType != cp->variantType) {
++		T(YAFFS_TRACE_ERROR, (TSTR("Checkpoint read object %d type %d "
++			TCONT("chunk %d does not match existing object type %d")
++			TENDSTR), cp->objectId, cp->variantType, cp->hdrChunk,
++			obj->variantType));
++		return 0;
++	}
++
+ 	obj->objectId = cp->objectId;
+ 
+-	if(cp->parentId)
++	if (cp->parentId)
+ 		parent = yaffs_FindOrCreateObjectByNumber(
+ 					obj->myDev,
+ 					cp->parentId,
+@@ -4189,10 +4244,19 @@ static void yaffs_CheckpointObjectToObje
+ 	else
+ 		parent = NULL;
+ 
+-	if(parent)
++	if (parent) {
++		if (parent->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
++			T(YAFFS_TRACE_ALWAYS, (TSTR("Checkpoint read object %d parent %d type %d"
++				TCONT(" chunk %d Parent type, %d, not directory")
++				TENDSTR),
++				cp->objectId, cp->parentId, cp->variantType,
++				cp->hdrChunk, parent->variantType));
++			return 0;
++		}
+ 		yaffs_AddObjectToDirectory(parent, obj);
++	}
+ 
+-	obj->chunkId = cp->chunkId;
++	obj->hdrChunk = cp->hdrChunk;
+ 	obj->variantType = cp->variantType;
+ 	obj->deleted = cp->deleted;
+ 	obj->softDeleted = cp->softDeleted;
+@@ -4203,29 +4267,34 @@ static void yaffs_CheckpointObjectToObje
+ 	obj->serial = cp->serial;
+ 	obj->nDataChunks = cp->nDataChunks;
+ 
+-	if(obj->variantType == YAFFS_OBJECT_TYPE_FILE)
++	if (obj->variantType == YAFFS_OBJECT_TYPE_FILE)
+ 		obj->variant.fileVariant.fileSize = cp->fileSizeOrEquivalentObjectId;
+-	else if(obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK)
++	else if (obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK)
+ 		obj->variant.hardLinkVariant.equivalentObjectId = cp->fileSizeOrEquivalentObjectId;
+ 
+-	if(obj->objectId >= YAFFS_NOBJECT_BUCKETS)
++	if (obj->hdrChunk > 0)
+ 		obj->lazyLoaded = 1;
++	return 1;
+ }
+ 
+ 
+ 
+-static int yaffs_CheckpointTnodeWorker(yaffs_Object * in, yaffs_Tnode * tn,
+-				  	__u32 level, int chunkOffset)
++static int yaffs_CheckpointTnodeWorker(yaffs_Object *in, yaffs_Tnode *tn,
++					__u32 level, int chunkOffset)
+ {
+ 	int i;
+ 	yaffs_Device *dev = in->myDev;
+ 	int ok = 1;
+-	int nTnodeBytes = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
++	int tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
++
++	if (tnodeSize < sizeof(yaffs_Tnode))
++		tnodeSize = sizeof(yaffs_Tnode);
++
+ 
+ 	if (tn) {
+ 		if (level > 0) {
+ 
+-			for (i = 0; i < YAFFS_NTNODES_INTERNAL && ok; i++){
++			for (i = 0; i < YAFFS_NTNODES_INTERNAL && ok; i++) {
+ 				if (tn->internal[i]) {
+ 					ok = yaffs_CheckpointTnodeWorker(in,
+ 							tn->internal[i],
+@@ -4235,10 +4304,9 @@ static int yaffs_CheckpointTnodeWorker(y
+ 			}
+ 		} else if (level == 0) {
+ 			__u32 baseOffset = chunkOffset <<  YAFFS_TNODES_LEVEL0_BITS;
+-			/* printf("write tnode at %d\n",baseOffset); */
+-			ok = (yaffs_CheckpointWrite(dev,&baseOffset,sizeof(baseOffset)) == sizeof(baseOffset));
+-			if(ok)
+-				ok = (yaffs_CheckpointWrite(dev,tn,nTnodeBytes) == nTnodeBytes);
++			ok = (yaffs_CheckpointWrite(dev, &baseOffset, sizeof(baseOffset)) == sizeof(baseOffset));
++			if (ok)
++				ok = (yaffs_CheckpointWrite(dev, tn, tnodeSize) == tnodeSize);
+ 		}
+ 	}
+ 
+@@ -4251,13 +4319,13 @@ static int yaffs_WriteCheckpointTnodes(y
+ 	__u32 endMarker = ~0;
+ 	int ok = 1;
+ 
+-	if(obj->variantType == YAFFS_OBJECT_TYPE_FILE){
++	if (obj->variantType == YAFFS_OBJECT_TYPE_FILE) {
+ 		ok = yaffs_CheckpointTnodeWorker(obj,
+ 					    obj->variant.fileVariant.top,
+ 					    obj->variant.fileVariant.topLevel,
+ 					    0);
+-		if(ok)
+-			ok = (yaffs_CheckpointWrite(obj->myDev,&endMarker,sizeof(endMarker)) ==
++		if (ok)
++			ok = (yaffs_CheckpointWrite(obj->myDev, &endMarker, sizeof(endMarker)) ==
+ 				sizeof(endMarker));
+ 	}
+ 
+@@ -4272,38 +4340,38 @@ static int yaffs_ReadCheckpointTnodes(ya
+ 	yaffs_FileStructure *fileStructPtr = &obj->variant.fileVariant;
+ 	yaffs_Tnode *tn;
+ 	int nread = 0;
++	int tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
+ 
+-	ok = (yaffs_CheckpointRead(dev,&baseChunk,sizeof(baseChunk)) == sizeof(baseChunk));
++	if (tnodeSize < sizeof(yaffs_Tnode))
++		tnodeSize = sizeof(yaffs_Tnode);
+ 
+-	while(ok && (~baseChunk)){
++	ok = (yaffs_CheckpointRead(dev, &baseChunk, sizeof(baseChunk)) == sizeof(baseChunk));
++
++	while (ok && (~baseChunk)) {
+ 		nread++;
+ 		/* Read level 0 tnode */
+ 
+ 
+-		/* printf("read  tnode at %d\n",baseChunk); */
+ 		tn = yaffs_GetTnodeRaw(dev);
+-		if(tn)
+-			ok = (yaffs_CheckpointRead(dev,tn,(dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8) ==
+-			      (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8);
++		if (tn)
++			ok = (yaffs_CheckpointRead(dev, tn, tnodeSize) == tnodeSize);
+ 		else
+ 			ok = 0;
+ 
+-		if(tn && ok){
++		if (tn && ok)
+ 			ok = yaffs_AddOrFindLevel0Tnode(dev,
+-					       		fileStructPtr,
+-					       		baseChunk,
+-					       		tn) ? 1 : 0;
++							fileStructPtr,
++							baseChunk,
++							tn) ? 1 : 0;
+ 
+-		}
+-
+-		if(ok)
+-			ok = (yaffs_CheckpointRead(dev,&baseChunk,sizeof(baseChunk)) == sizeof(baseChunk));
++		if (ok)
++			ok = (yaffs_CheckpointRead(dev, &baseChunk, sizeof(baseChunk)) == sizeof(baseChunk));
+ 
+ 	}
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(
++	T(YAFFS_TRACE_CHECKPOINT, (
+ 		TSTR("Checkpoint read tnodes %d records, last %d. ok %d" TENDSTR),
+-		nread,baseChunk,ok));
++		nread, baseChunk, ok));
+ 
+ 	return ok ? 1 : 0;
+ }
+@@ -4315,41 +4383,40 @@ static int yaffs_WriteCheckpointObjects(
+ 	yaffs_CheckpointObject cp;
+ 	int i;
+ 	int ok = 1;
+-	struct list_head *lh;
++	struct ylist_head *lh;
+ 
+ 
+ 	/* Iterate through the objects in each hash entry,
+ 	 * dumping them to the checkpointing stream.
+ 	 */
+ 
+-	 for(i = 0; ok &&  i <  YAFFS_NOBJECT_BUCKETS; i++){
+-	 	list_for_each(lh, &dev->objectBucket[i].list) {
++	for (i = 0; ok &&  i <  YAFFS_NOBJECT_BUCKETS; i++) {
++		ylist_for_each(lh, &dev->objectBucket[i].list) {
+ 			if (lh) {
+-				obj = list_entry(lh, yaffs_Object, hashLink);
++				obj = ylist_entry(lh, yaffs_Object, hashLink);
+ 				if (!obj->deferedFree) {
+-					yaffs_ObjectToCheckpointObject(&cp,obj);
++					yaffs_ObjectToCheckpointObject(&cp, obj);
+ 					cp.structType = sizeof(cp);
+ 
+-					T(YAFFS_TRACE_CHECKPOINT,(
++					T(YAFFS_TRACE_CHECKPOINT, (
+ 						TSTR("Checkpoint write object %d parent %d type %d chunk %d obj addr %x" TENDSTR),
+-						cp.objectId,cp.parentId,cp.variantType,cp.chunkId,(unsigned) obj));
++						cp.objectId, cp.parentId, cp.variantType, cp.hdrChunk, (unsigned) obj));
+ 
+-					ok = (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp));
++					ok = (yaffs_CheckpointWrite(dev, &cp, sizeof(cp)) == sizeof(cp));
+ 
+-					if(ok && obj->variantType == YAFFS_OBJECT_TYPE_FILE){
++					if (ok && obj->variantType == YAFFS_OBJECT_TYPE_FILE)
+ 						ok = yaffs_WriteCheckpointTnodes(obj);
+-					}
+ 				}
+ 			}
+ 		}
+-	 }
++	}
+ 
+-	 /* Dump end of list */
+-	memset(&cp,0xFF,sizeof(yaffs_CheckpointObject));
++	/* Dump end of list */
++	memset(&cp, 0xFF, sizeof(yaffs_CheckpointObject));
+ 	cp.structType = sizeof(cp);
+ 
+-	if(ok)
+-		ok = (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp));
++	if (ok)
++		ok = (yaffs_CheckpointWrite(dev, &cp, sizeof(cp)) == sizeof(cp));
+ 
+ 	return ok ? 1 : 0;
+ }
+@@ -4362,38 +4429,39 @@ static int yaffs_ReadCheckpointObjects(y
+ 	int done = 0;
+ 	yaffs_Object *hardList = NULL;
+ 
+-	while(ok && !done) {
+-		ok = (yaffs_CheckpointRead(dev,&cp,sizeof(cp)) == sizeof(cp));
+-		if(cp.structType != sizeof(cp)) {
+-			T(YAFFS_TRACE_CHECKPOINT,(TSTR("struct size %d instead of %d ok %d"TENDSTR),
+-				cp.structType,sizeof(cp),ok));
++	while (ok && !done) {
++		ok = (yaffs_CheckpointRead(dev, &cp, sizeof(cp)) == sizeof(cp));
++		if (cp.structType != sizeof(cp)) {
++			T(YAFFS_TRACE_CHECKPOINT, (TSTR("struct size %d instead of %d ok %d"TENDSTR),
++				cp.structType, sizeof(cp), ok));
+ 			ok = 0;
+ 		}
+ 
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("Checkpoint read object %d parent %d type %d chunk %d " TENDSTR),
+-			cp.objectId,cp.parentId,cp.variantType,cp.chunkId));
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("Checkpoint read object %d parent %d type %d chunk %d " TENDSTR),
++			cp.objectId, cp.parentId, cp.variantType, cp.hdrChunk));
+ 
+-		if(ok && cp.objectId == ~0)
++		if (ok && cp.objectId == ~0)
+ 			done = 1;
+-		else if(ok){
+-			obj = yaffs_FindOrCreateObjectByNumber(dev,cp.objectId, cp.variantType);
+-			if(obj) {
+-				yaffs_CheckpointObjectToObject(obj,&cp);
+-				if(obj->variantType == YAFFS_OBJECT_TYPE_FILE) {
++		else if (ok) {
++			obj = yaffs_FindOrCreateObjectByNumber(dev, cp.objectId, cp.variantType);
++			if (obj) {
++				ok = yaffs_CheckpointObjectToObject(obj, &cp);
++				if (!ok)
++					break;
++				if (obj->variantType == YAFFS_OBJECT_TYPE_FILE) {
+ 					ok = yaffs_ReadCheckpointTnodes(obj);
+-				} else if(obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) {
++				} else if (obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) {
+ 					obj->hardLinks.next =
+-						    (struct list_head *)
+-						    hardList;
++						(struct ylist_head *) hardList;
+ 					hardList = obj;
+ 				}
+-
+-			}
++			} else
++				ok = 0;
+ 		}
+ 	}
+ 
+-	if(ok)
+-		yaffs_HardlinkFixup(dev,hardList);
++	if (ok)
++		yaffs_HardlinkFixup(dev, hardList);
+ 
+ 	return ok ? 1 : 0;
+ }
+@@ -4403,11 +4471,11 @@ static int yaffs_WriteCheckpointSum(yaff
+ 	__u32 checkpointSum;
+ 	int ok;
+ 
+-	yaffs_GetCheckpointSum(dev,&checkpointSum);
++	yaffs_GetCheckpointSum(dev, &checkpointSum);
+ 
+-	ok = (yaffs_CheckpointWrite(dev,&checkpointSum,sizeof(checkpointSum)) == sizeof(checkpointSum));
++	ok = (yaffs_CheckpointWrite(dev, &checkpointSum, sizeof(checkpointSum)) == sizeof(checkpointSum));
+ 
+-	if(!ok)
++	if (!ok)
+ 		return 0;
+ 
+ 	return 1;
+@@ -4419,14 +4487,14 @@ static int yaffs_ReadCheckpointSum(yaffs
+ 	__u32 checkpointSum1;
+ 	int ok;
+ 
+-	yaffs_GetCheckpointSum(dev,&checkpointSum0);
++	yaffs_GetCheckpointSum(dev, &checkpointSum0);
+ 
+-	ok = (yaffs_CheckpointRead(dev,&checkpointSum1,sizeof(checkpointSum1)) == sizeof(checkpointSum1));
++	ok = (yaffs_CheckpointRead(dev, &checkpointSum1, sizeof(checkpointSum1)) == sizeof(checkpointSum1));
+ 
+-	if(!ok)
++	if (!ok)
+ 		return 0;
+ 
+-	if(checkpointSum0 != checkpointSum1)
++	if (checkpointSum0 != checkpointSum1)
+ 		return 0;
+ 
+ 	return 1;
+@@ -4435,46 +4503,43 @@ static int yaffs_ReadCheckpointSum(yaffs
+ 
+ static int yaffs_WriteCheckpointData(yaffs_Device *dev)
+ {
+-
+ 	int ok = 1;
+ 
+-	if(dev->skipCheckpointWrite || !dev->isYaffs2){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("skipping checkpoint write" TENDSTR)));
++	if (dev->skipCheckpointWrite || !dev->isYaffs2) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("skipping checkpoint write" TENDSTR)));
+ 		ok = 0;
+ 	}
+ 
+-	if(ok)
+-		ok = yaffs_CheckpointOpen(dev,1);
++	if (ok)
++		ok = yaffs_CheckpointOpen(dev, 1);
+ 
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint validity" TENDSTR)));
+-		ok = yaffs_WriteCheckpointValidityMarker(dev,1);
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("write checkpoint validity" TENDSTR)));
++		ok = yaffs_WriteCheckpointValidityMarker(dev, 1);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint device" TENDSTR)));
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("write checkpoint device" TENDSTR)));
+ 		ok = yaffs_WriteCheckpointDevice(dev);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint objects" TENDSTR)));
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("write checkpoint objects" TENDSTR)));
+ 		ok = yaffs_WriteCheckpointObjects(dev);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint validity" TENDSTR)));
+-		ok = yaffs_WriteCheckpointValidityMarker(dev,0);
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("write checkpoint validity" TENDSTR)));
++		ok = yaffs_WriteCheckpointValidityMarker(dev, 0);
+ 	}
+ 
+-	if(ok){
++	if (ok)
+ 		ok = yaffs_WriteCheckpointSum(dev);
+-	}
+-
+ 
+-	if(!yaffs_CheckpointClose(dev))
+-		 ok = 0;
++	if (!yaffs_CheckpointClose(dev))
++		ok = 0;
+ 
+-	if(ok)
+-	    	dev->isCheckpointed = 1;
+-	 else
+-	 	dev->isCheckpointed = 0;
++	if (ok)
++		dev->isCheckpointed = 1;
++	else
++		dev->isCheckpointed = 0;
+ 
+ 	return dev->isCheckpointed;
+ }
+@@ -4483,43 +4548,43 @@ static int yaffs_ReadCheckpointData(yaff
+ {
+ 	int ok = 1;
+ 
+-	if(dev->skipCheckpointRead || !dev->isYaffs2){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("skipping checkpoint read" TENDSTR)));
++	if (dev->skipCheckpointRead || !dev->isYaffs2) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("skipping checkpoint read" TENDSTR)));
+ 		ok = 0;
+ 	}
+ 
+-	if(ok)
+-		ok = yaffs_CheckpointOpen(dev,0); /* open for read */
++	if (ok)
++		ok = yaffs_CheckpointOpen(dev, 0); /* open for read */
+ 
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint validity" TENDSTR)));
+-		ok = yaffs_ReadCheckpointValidityMarker(dev,1);
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("read checkpoint validity" TENDSTR)));
++		ok = yaffs_ReadCheckpointValidityMarker(dev, 1);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint device" TENDSTR)));
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("read checkpoint device" TENDSTR)));
+ 		ok = yaffs_ReadCheckpointDevice(dev);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint objects" TENDSTR)));
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("read checkpoint objects" TENDSTR)));
+ 		ok = yaffs_ReadCheckpointObjects(dev);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint validity" TENDSTR)));
+-		ok = yaffs_ReadCheckpointValidityMarker(dev,0);
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("read checkpoint validity" TENDSTR)));
++		ok = yaffs_ReadCheckpointValidityMarker(dev, 0);
+ 	}
+ 
+-	if(ok){
++	if (ok) {
+ 		ok = yaffs_ReadCheckpointSum(dev);
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint checksum %d" TENDSTR),ok));
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("read checkpoint checksum %d" TENDSTR), ok));
+ 	}
+ 
+-	if(!yaffs_CheckpointClose(dev))
++	if (!yaffs_CheckpointClose(dev))
+ 		ok = 0;
+ 
+-	if(ok)
+-	    	dev->isCheckpointed = 1;
+-	 else
+-	 	dev->isCheckpointed = 0;
++	if (ok)
++		dev->isCheckpointed = 1;
++	else
++		dev->isCheckpointed = 0;
+ 
+ 	return ok ? 1 : 0;
+ 
+@@ -4527,11 +4592,11 @@ static int yaffs_ReadCheckpointData(yaff
+ 
+ static void yaffs_InvalidateCheckpoint(yaffs_Device *dev)
+ {
+-	if(dev->isCheckpointed ||
+-	   dev->blocksInCheckpoint > 0){
++	if (dev->isCheckpointed ||
++			dev->blocksInCheckpoint > 0) {
+ 		dev->isCheckpointed = 0;
+ 		yaffs_CheckpointInvalidateStream(dev);
+-		if(dev->superBlock && dev->markSuperBlockDirty)
++		if (dev->superBlock && dev->markSuperBlockDirty)
+ 			dev->markSuperBlockDirty(dev->superBlock);
+ 	}
+ }
+@@ -4540,18 +4605,18 @@ static void yaffs_InvalidateCheckpoint(y
+ int yaffs_CheckpointSave(yaffs_Device *dev)
+ {
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("save entry: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("save entry: isCheckpointed %d"TENDSTR), dev->isCheckpointed));
+ 
+ 	yaffs_VerifyObjects(dev);
+ 	yaffs_VerifyBlocks(dev);
+ 	yaffs_VerifyFreeChunks(dev);
+ 
+-	if(!dev->isCheckpointed) {
++	if (!dev->isCheckpointed) {
+ 		yaffs_InvalidateCheckpoint(dev);
+ 		yaffs_WriteCheckpointData(dev);
+ 	}
+ 
+-	T(YAFFS_TRACE_ALWAYS,(TSTR("save exit: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
++	T(YAFFS_TRACE_ALWAYS, (TSTR("save exit: isCheckpointed %d"TENDSTR), dev->isCheckpointed));
+ 
+ 	return dev->isCheckpointed;
+ }
+@@ -4559,17 +4624,17 @@ int yaffs_CheckpointSave(yaffs_Device *d
+ int yaffs_CheckpointRestore(yaffs_Device *dev)
+ {
+ 	int retval;
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("restore entry: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("restore entry: isCheckpointed %d"TENDSTR), dev->isCheckpointed));
+ 
+ 	retval = yaffs_ReadCheckpointData(dev);
+ 
+-	if(dev->isCheckpointed){
++	if (dev->isCheckpointed) {
+ 		yaffs_VerifyObjects(dev);
+ 		yaffs_VerifyBlocks(dev);
+ 		yaffs_VerifyFreeChunks(dev);
+ 	}
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("restore exit: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("restore exit: isCheckpointed %d"TENDSTR), dev->isCheckpointed));
+ 
+ 	return retval;
+ }
+@@ -4584,12 +4649,12 @@ int yaffs_CheckpointRestore(yaffs_Device
+  * Curve-balls: the first chunk might also be the last chunk.
+  */
+ 
+-int yaffs_ReadDataFromFile(yaffs_Object * in, __u8 * buffer, loff_t offset,
+-			   int nBytes)
++int yaffs_ReadDataFromFile(yaffs_Object *in, __u8 *buffer, loff_t offset,
++			int nBytes)
+ {
+ 
+ 	int chunk;
+-	int start;
++	__u32 start;
+ 	int nToCopy;
+ 	int n = nBytes;
+ 	int nDone = 0;
+@@ -4600,27 +4665,26 @@ int yaffs_ReadDataFromFile(yaffs_Object 
+ 	dev = in->myDev;
+ 
+ 	while (n > 0) {
+-		//chunk = offset / dev->nDataBytesPerChunk + 1;
+-		//start = offset % dev->nDataBytesPerChunk;
+-		yaffs_AddrToChunk(dev,offset,&chunk,&start);
++		/* chunk = offset / dev->nDataBytesPerChunk + 1; */
++		/* start = offset % dev->nDataBytesPerChunk; */
++		yaffs_AddrToChunk(dev, offset, &chunk, &start);
+ 		chunk++;
+ 
+ 		/* OK now check for the curveball where the start and end are in
+ 		 * the same chunk.
+ 		 */
+-		if ((start + n) < dev->nDataBytesPerChunk) {
++		if ((start + n) < dev->nDataBytesPerChunk)
+ 			nToCopy = n;
+-		} else {
++		else
+ 			nToCopy = dev->nDataBytesPerChunk - start;
+-		}
+ 
+ 		cache = yaffs_FindChunkCache(in, chunk);
+ 
+ 		/* If the chunk is already in the cache or it is less than a whole chunk
+-		 * then use the cache (if there is caching)
++		 * or we're using inband tags then use the cache (if there is caching)
+ 		 * else bypass the cache.
+ 		 */
+-		if (cache || nToCopy != dev->nDataBytesPerChunk) {
++		if (cache || nToCopy != dev->nDataBytesPerChunk || dev->inbandTags) {
+ 			if (dev->nShortOpCaches > 0) {
+ 
+ 				/* If we can't find the data in the cache, then load it up. */
+@@ -4641,14 +4705,9 @@ int yaffs_ReadDataFromFile(yaffs_Object 
+ 
+ 				cache->locked = 1;
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_UnlockYAFFS(TRUE);
+-#endif
++
+ 				memcpy(buffer, &cache->data[start], nToCopy);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_LockYAFFS(TRUE);
+-#endif
+ 				cache->locked = 0;
+ 			} else {
+ 				/* Read into the local buffer then copy..*/
+@@ -4657,41 +4716,19 @@ int yaffs_ReadDataFromFile(yaffs_Object 
+ 				    yaffs_GetTempBuffer(dev, __LINE__);
+ 				yaffs_ReadChunkDataFromObject(in, chunk,
+ 							      localBuffer);
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_UnlockYAFFS(TRUE);
+-#endif
++
+ 				memcpy(buffer, &localBuffer[start], nToCopy);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_LockYAFFS(TRUE);
+-#endif
++
+ 				yaffs_ReleaseTempBuffer(dev, localBuffer,
+ 							__LINE__);
+ 			}
+ 
+ 		} else {
+-#ifdef CONFIG_YAFFS_WINCE
+-			__u8 *localBuffer = yaffs_GetTempBuffer(dev, __LINE__);
+-
+-			/* Under WinCE can't do direct transfer. Need to use a local buffer.
+-			 * This is because we otherwise screw up WinCE's memory mapper
+-			 */
+-			yaffs_ReadChunkDataFromObject(in, chunk, localBuffer);
+-
+-#ifdef CONFIG_YAFFS_WINCE
+-			yfsd_UnlockYAFFS(TRUE);
+-#endif
+-			memcpy(buffer, localBuffer, dev->nDataBytesPerChunk);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-			yfsd_LockYAFFS(TRUE);
+-			yaffs_ReleaseTempBuffer(dev, localBuffer, __LINE__);
+-#endif
+-
+-#else
+ 			/* A full chunk. Read directly into the supplied buffer. */
+ 			yaffs_ReadChunkDataFromObject(in, chunk, buffer);
+-#endif
++
+ 		}
+ 
+ 		n -= nToCopy;
+@@ -4704,28 +4741,37 @@ int yaffs_ReadDataFromFile(yaffs_Object 
+ 	return nDone;
+ }
+ 
+-int yaffs_WriteDataToFile(yaffs_Object * in, const __u8 * buffer, loff_t offset,
+-			  int nBytes, int writeThrough)
++int yaffs_WriteDataToFile(yaffs_Object *in, const __u8 *buffer, loff_t offset,
++			int nBytes, int writeThrough)
+ {
+ 
+ 	int chunk;
+-	int start;
++	__u32 start;
+ 	int nToCopy;
+ 	int n = nBytes;
+ 	int nDone = 0;
+ 	int nToWriteBack;
+ 	int startOfWrite = offset;
+ 	int chunkWritten = 0;
+-	int nBytesRead;
++	__u32 nBytesRead;
++	__u32 chunkStart;
+ 
+ 	yaffs_Device *dev;
+ 
+ 	dev = in->myDev;
+ 
+ 	while (n > 0 && chunkWritten >= 0) {
+-		//chunk = offset / dev->nDataBytesPerChunk + 1;
+-		//start = offset % dev->nDataBytesPerChunk;
+-		yaffs_AddrToChunk(dev,offset,&chunk,&start);
++		/* chunk = offset / dev->nDataBytesPerChunk + 1; */
++		/* start = offset % dev->nDataBytesPerChunk; */
++		yaffs_AddrToChunk(dev, offset, &chunk, &start);
++
++		if (chunk * dev->nDataBytesPerChunk + start != offset ||
++				start >= dev->nDataBytesPerChunk) {
++			T(YAFFS_TRACE_ERROR, (
++			   TSTR("AddrToChunk of offset %d gives chunk %d start %d"
++			   TENDSTR),
++			   (int)offset, chunk, start));
++		}
+ 		chunk++;
+ 
+ 		/* OK now check for the curveball where the start and end are in
+@@ -4740,25 +4786,32 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 			 * we need to write back as much as was there before.
+ 			 */
+ 
+-			nBytesRead =
+-			    in->variant.fileVariant.fileSize -
+-			    ((chunk - 1) * dev->nDataBytesPerChunk);
++			chunkStart = ((chunk - 1) * dev->nDataBytesPerChunk);
++
++			if (chunkStart > in->variant.fileVariant.fileSize)
++				nBytesRead = 0; /* Past end of file */
++			else
++				nBytesRead = in->variant.fileVariant.fileSize - chunkStart;
+ 
+-			if (nBytesRead > dev->nDataBytesPerChunk) {
++			if (nBytesRead > dev->nDataBytesPerChunk)
+ 				nBytesRead = dev->nDataBytesPerChunk;
+-			}
+ 
+ 			nToWriteBack =
+ 			    (nBytesRead >
+ 			     (start + n)) ? nBytesRead : (start + n);
+ 
++			if (nToWriteBack < 0 || nToWriteBack > dev->nDataBytesPerChunk)
++				YBUG();
++
+ 		} else {
+ 			nToCopy = dev->nDataBytesPerChunk - start;
+ 			nToWriteBack = dev->nDataBytesPerChunk;
+ 		}
+ 
+-		if (nToCopy != dev->nDataBytesPerChunk) {
+-			/* An incomplete start or end chunk (or maybe both start and end chunk) */
++		if (nToCopy != dev->nDataBytesPerChunk || dev->inbandTags) {
++			/* An incomplete start or end chunk (or maybe both start and end chunk),
++			 * or we're using inband tags, so we want to use the cache buffers.
++			 */
+ 			if (dev->nShortOpCaches > 0) {
+ 				yaffs_ChunkCache *cache;
+ 				/* If we can't find the data in the cache, then load the cache */
+@@ -4775,10 +4828,9 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 					yaffs_ReadChunkDataFromObject(in, chunk,
+ 								      cache->
+ 								      data);
+-				}
+-				else if(cache &&
+-				        !cache->dirty &&
+-					!yaffs_CheckSpaceForAllocation(in->myDev)){
++				} else if (cache &&
++					!cache->dirty &&
++					!yaffs_CheckSpaceForAllocation(in->myDev)) {
+ 					/* Drop the cache if it was a read cache item and
+ 					 * no space check has been made for it.
+ 					 */
+@@ -4788,16 +4840,12 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 				if (cache) {
+ 					yaffs_UseChunkCache(dev, cache, 1);
+ 					cache->locked = 1;
+-#ifdef CONFIG_YAFFS_WINCE
+-					yfsd_UnlockYAFFS(TRUE);
+-#endif
++
+ 
+ 					memcpy(&cache->data[start], buffer,
+ 					       nToCopy);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-					yfsd_LockYAFFS(TRUE);
+-#endif
++
+ 					cache->locked = 0;
+ 					cache->nBytes = nToWriteBack;
+ 
+@@ -4825,15 +4873,10 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 				yaffs_ReadChunkDataFromObject(in, chunk,
+ 							      localBuffer);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_UnlockYAFFS(TRUE);
+-#endif
++
+ 
+ 				memcpy(&localBuffer[start], buffer, nToCopy);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_LockYAFFS(TRUE);
+-#endif
+ 				chunkWritten =
+ 				    yaffs_WriteChunkDataToObject(in, chunk,
+ 								 localBuffer,
+@@ -4846,31 +4889,15 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 			}
+ 
+ 		} else {
+-
+-#ifdef CONFIG_YAFFS_WINCE
+-			/* Under WinCE can't do direct transfer. Need to use a local buffer.
+-			 * This is because we otherwise screw up WinCE's memory mapper
+-			 */
+-			__u8 *localBuffer = yaffs_GetTempBuffer(dev, __LINE__);
+-#ifdef CONFIG_YAFFS_WINCE
+-			yfsd_UnlockYAFFS(TRUE);
+-#endif
+-			memcpy(localBuffer, buffer, dev->nDataBytesPerChunk);
+-#ifdef CONFIG_YAFFS_WINCE
+-			yfsd_LockYAFFS(TRUE);
+-#endif
+-			chunkWritten =
+-			    yaffs_WriteChunkDataToObject(in, chunk, localBuffer,
+-							 dev->nDataBytesPerChunk,
+-							 0);
+-			yaffs_ReleaseTempBuffer(dev, localBuffer, __LINE__);
+-#else
+ 			/* A full chunk. Write directly from the supplied buffer. */
++
++
++
+ 			chunkWritten =
+ 			    yaffs_WriteChunkDataToObject(in, chunk, buffer,
+ 							 dev->nDataBytesPerChunk,
+ 							 0);
+-#endif
++
+ 			/* Since we've overwritten the cached data, we better invalidate it. */
+ 			yaffs_InvalidateChunkCache(in, chunk);
+ 		}
+@@ -4886,9 +4913,8 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 
+ 	/* Update file object */
+ 
+-	if ((startOfWrite + nDone) > in->variant.fileVariant.fileSize) {
++	if ((startOfWrite + nDone) > in->variant.fileVariant.fileSize)
+ 		in->variant.fileVariant.fileSize = (startOfWrite + nDone);
+-	}
+ 
+ 	in->dirty = 1;
+ 
+@@ -4898,7 +4924,7 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 
+ /* ---------------------- File resizing stuff ------------------ */
+ 
+-static void yaffs_PruneResizedChunks(yaffs_Object * in, int newSize)
++static void yaffs_PruneResizedChunks(yaffs_Object *in, int newSize)
+ {
+ 
+ 	yaffs_Device *dev = in->myDev;
+@@ -4939,11 +4965,11 @@ static void yaffs_PruneResizedChunks(yaf
+ 
+ }
+ 
+-int yaffs_ResizeFile(yaffs_Object * in, loff_t newSize)
++int yaffs_ResizeFile(yaffs_Object *in, loff_t newSize)
+ {
+ 
+ 	int oldFileSize = in->variant.fileVariant.fileSize;
+-	int newSizeOfPartialChunk;
++	__u32 newSizeOfPartialChunk;
+ 	int newFullChunks;
+ 
+ 	yaffs_Device *dev = in->myDev;
+@@ -4955,13 +4981,11 @@ int yaffs_ResizeFile(yaffs_Object * in, 
+ 
+ 	yaffs_CheckGarbageCollection(dev);
+ 
+-	if (in->variantType != YAFFS_OBJECT_TYPE_FILE) {
+-		return yaffs_GetFileSize(in);
+-	}
++	if (in->variantType != YAFFS_OBJECT_TYPE_FILE)
++		return YAFFS_FAIL;
+ 
+-	if (newSize == oldFileSize) {
+-		return oldFileSize;
+-	}
++	if (newSize == oldFileSize)
++		return YAFFS_OK;
+ 
+ 	if (newSize < oldFileSize) {
+ 
+@@ -4994,21 +5018,20 @@ int yaffs_ResizeFile(yaffs_Object * in, 
+ 	}
+ 
+ 
+-
+ 	/* Write a new object header.
+ 	 * show we've shrunk the file, if need be
+ 	 * Do this only if the file is not in the deleted directories.
+ 	 */
+-	if (in->parent->objectId != YAFFS_OBJECTID_UNLINKED &&
+-	    in->parent->objectId != YAFFS_OBJECTID_DELETED) {
++	if (in->parent &&
++	    in->parent->objectId != YAFFS_OBJECTID_UNLINKED &&
++	    in->parent->objectId != YAFFS_OBJECTID_DELETED)
+ 		yaffs_UpdateObjectHeader(in, NULL, 0,
+ 					 (newSize < oldFileSize) ? 1 : 0, 0);
+-	}
+ 
+-	return newSize;
++	return YAFFS_OK;
+ }
+ 
+-loff_t yaffs_GetFileSize(yaffs_Object * obj)
++loff_t yaffs_GetFileSize(yaffs_Object *obj)
+ {
+ 	obj = yaffs_GetEquivalentObject(obj);
+ 
+@@ -5024,7 +5047,7 @@ loff_t yaffs_GetFileSize(yaffs_Object * 
+ 
+ 
+ 
+-int yaffs_FlushFile(yaffs_Object * in, int updateTime)
++int yaffs_FlushFile(yaffs_Object *in, int updateTime)
+ {
+ 	int retVal;
+ 	if (in->dirty) {
+@@ -5039,9 +5062,8 @@ int yaffs_FlushFile(yaffs_Object * in, i
+ #endif
+ 		}
+ 
+-		retVal =
+-		    (yaffs_UpdateObjectHeader(in, NULL, 0, 0, 0) >=
+-		     0) ? YAFFS_OK : YAFFS_FAIL;
++		retVal = (yaffs_UpdateObjectHeader(in, NULL, 0, 0, 0) >=
++			0) ? YAFFS_OK : YAFFS_FAIL;
+ 	} else {
+ 		retVal = YAFFS_OK;
+ 	}
+@@ -5050,7 +5072,7 @@ int yaffs_FlushFile(yaffs_Object * in, i
+ 
+ }
+ 
+-static int yaffs_DoGenericObjectDeletion(yaffs_Object * in)
++static int yaffs_DoGenericObjectDeletion(yaffs_Object *in)
+ {
+ 
+ 	/* First off, invalidate the file's data in the cache, without flushing. */
+@@ -5058,13 +5080,13 @@ static int yaffs_DoGenericObjectDeletion
+ 
+ 	if (in->myDev->isYaffs2 && (in->parent != in->myDev->deletedDir)) {
+ 		/* Move to the unlinked directory so we have a record that it was deleted. */
+-		yaffs_ChangeObjectName(in, in->myDev->deletedDir,"deleted", 0, 0);
++		yaffs_ChangeObjectName(in, in->myDev->deletedDir, _Y("deleted"), 0, 0);
+ 
+ 	}
+ 
+ 	yaffs_RemoveObjectFromDirectory(in);
+-	yaffs_DeleteChunk(in->myDev, in->chunkId, 1, __LINE__);
+-	in->chunkId = -1;
++	yaffs_DeleteChunk(in->myDev, in->hdrChunk, 1, __LINE__);
++	in->hdrChunk = 0;
+ 
+ 	yaffs_FreeObject(in);
+ 	return YAFFS_OK;
+@@ -5075,62 +5097,63 @@ static int yaffs_DoGenericObjectDeletion
+  * and the inode associated with the file.
+  * It does not delete the links associated with the file.
+  */
+-static int yaffs_UnlinkFile(yaffs_Object * in)
++static int yaffs_UnlinkFileIfNeeded(yaffs_Object *in)
+ {
+ 
+ 	int retVal;
+ 	int immediateDeletion = 0;
+ 
+-	if (1) {
+ #ifdef __KERNEL__
+-		if (!in->myInode) {
+-			immediateDeletion = 1;
+-
+-		}
++	if (!in->myInode)
++		immediateDeletion = 1;
+ #else
+-		if (in->inUse <= 0) {
+-			immediateDeletion = 1;
+-
+-		}
++	if (in->inUse <= 0)
++		immediateDeletion = 1;
+ #endif
+-		if (immediateDeletion) {
+-			retVal =
+-			    yaffs_ChangeObjectName(in, in->myDev->deletedDir,
+-						   "deleted", 0, 0);
+-			T(YAFFS_TRACE_TRACING,
+-			  (TSTR("yaffs: immediate deletion of file %d" TENDSTR),
+-			   in->objectId));
+-			in->deleted = 1;
+-			in->myDev->nDeletedFiles++;
+-			if (0 && in->myDev->isYaffs2) {
+-				yaffs_ResizeFile(in, 0);
+-			}
+-			yaffs_SoftDeleteFile(in);
+-		} else {
+-			retVal =
+-			    yaffs_ChangeObjectName(in, in->myDev->unlinkedDir,
+-						   "unlinked", 0, 0);
+-		}
+ 
++	if (immediateDeletion) {
++		retVal =
++		    yaffs_ChangeObjectName(in, in->myDev->deletedDir,
++					   _Y("deleted"), 0, 0);
++		T(YAFFS_TRACE_TRACING,
++		  (TSTR("yaffs: immediate deletion of file %d" TENDSTR),
++		   in->objectId));
++		in->deleted = 1;
++		in->myDev->nDeletedFiles++;
++		if (1 || in->myDev->isYaffs2)
++			yaffs_ResizeFile(in, 0);
++		yaffs_SoftDeleteFile(in);
++	} else {
++		retVal =
++		    yaffs_ChangeObjectName(in, in->myDev->unlinkedDir,
++					   _Y("unlinked"), 0, 0);
+ 	}
++
++
+ 	return retVal;
+ }
+ 
+-int yaffs_DeleteFile(yaffs_Object * in)
++int yaffs_DeleteFile(yaffs_Object *in)
+ {
+ 	int retVal = YAFFS_OK;
++	int deleted = in->deleted;
++
++	yaffs_ResizeFile(in, 0);
+ 
+ 	if (in->nDataChunks > 0) {
+-		/* Use soft deletion if there is data in the file */
+-		if (!in->unlinked) {
+-			retVal = yaffs_UnlinkFile(in);
+-		}
++		/* Use soft deletion if there is data in the file.
++		 * That won't be the case if it has been resized to zero.
++		 */
++		if (!in->unlinked)
++			retVal = yaffs_UnlinkFileIfNeeded(in);
++
+ 		if (retVal == YAFFS_OK && in->unlinked && !in->deleted) {
+ 			in->deleted = 1;
++			deleted = 1;
+ 			in->myDev->nDeletedFiles++;
+ 			yaffs_SoftDeleteFile(in);
+ 		}
+-		return in->deleted ? YAFFS_OK : YAFFS_FAIL;
++		return deleted ? YAFFS_OK : YAFFS_FAIL;
+ 	} else {
+ 		/* The file has no data chunks so we toss it immediately */
+ 		yaffs_FreeTnode(in->myDev, in->variant.fileVariant.top);
+@@ -5141,62 +5164,75 @@ int yaffs_DeleteFile(yaffs_Object * in)
+ 	}
+ }
+ 
+-static int yaffs_DeleteDirectory(yaffs_Object * in)
++static int yaffs_DeleteDirectory(yaffs_Object *in)
+ {
+ 	/* First check that the directory is empty. */
+-	if (list_empty(&in->variant.directoryVariant.children)) {
++	if (ylist_empty(&in->variant.directoryVariant.children))
+ 		return yaffs_DoGenericObjectDeletion(in);
+-	}
+ 
+ 	return YAFFS_FAIL;
+ 
+ }
+ 
+-static int yaffs_DeleteSymLink(yaffs_Object * in)
++static int yaffs_DeleteSymLink(yaffs_Object *in)
+ {
+ 	YFREE(in->variant.symLinkVariant.alias);
+ 
+ 	return yaffs_DoGenericObjectDeletion(in);
+ }
+ 
+-static int yaffs_DeleteHardLink(yaffs_Object * in)
++static int yaffs_DeleteHardLink(yaffs_Object *in)
+ {
+ 	/* remove this hardlink from the list assocaited with the equivalent
+ 	 * object
+ 	 */
+-	list_del(&in->hardLinks);
++	ylist_del_init(&in->hardLinks);
+ 	return yaffs_DoGenericObjectDeletion(in);
+ }
+ 
+-static void yaffs_DestroyObject(yaffs_Object * obj)
++int yaffs_DeleteObject(yaffs_Object *obj)
+ {
++int retVal = -1;
+ 	switch (obj->variantType) {
+ 	case YAFFS_OBJECT_TYPE_FILE:
+-		yaffs_DeleteFile(obj);
++		retVal = yaffs_DeleteFile(obj);
+ 		break;
+ 	case YAFFS_OBJECT_TYPE_DIRECTORY:
+-		yaffs_DeleteDirectory(obj);
++		return yaffs_DeleteDirectory(obj);
+ 		break;
+ 	case YAFFS_OBJECT_TYPE_SYMLINK:
+-		yaffs_DeleteSymLink(obj);
++		retVal = yaffs_DeleteSymLink(obj);
+ 		break;
+ 	case YAFFS_OBJECT_TYPE_HARDLINK:
+-		yaffs_DeleteHardLink(obj);
++		retVal = yaffs_DeleteHardLink(obj);
+ 		break;
+ 	case YAFFS_OBJECT_TYPE_SPECIAL:
+-		yaffs_DoGenericObjectDeletion(obj);
++		retVal = yaffs_DoGenericObjectDeletion(obj);
+ 		break;
+ 	case YAFFS_OBJECT_TYPE_UNKNOWN:
++		retVal = 0;
+ 		break;		/* should not happen. */
+ 	}
++
++	return retVal;
+ }
+ 
+-static int yaffs_UnlinkWorker(yaffs_Object * obj)
++static int yaffs_UnlinkWorker(yaffs_Object *obj)
+ {
+ 
++	int immediateDeletion = 0;
++
++#ifdef __KERNEL__
++	if (!obj->myInode)
++		immediateDeletion = 1;
++#else
++	if (obj->inUse <= 0)
++		immediateDeletion = 1;
++#endif
++
+ 	if (obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) {
+ 		return yaffs_DeleteHardLink(obj);
+-	} else if (!list_empty(&obj->hardLinks)) {
++	} else if (!ylist_empty(&obj->hardLinks)) {
+ 		/* Curve ball: We're unlinking an object that has a hardlink.
+ 		 *
+ 		 * This problem arises because we are not strictly following
+@@ -5215,24 +5251,24 @@ static int yaffs_UnlinkWorker(yaffs_Obje
+ 		int retVal;
+ 		YCHAR name[YAFFS_MAX_NAME_LENGTH + 1];
+ 
+-		hl = list_entry(obj->hardLinks.next, yaffs_Object, hardLinks);
++		hl = ylist_entry(obj->hardLinks.next, yaffs_Object, hardLinks);
+ 
+-		list_del_init(&hl->hardLinks);
+-		list_del_init(&hl->siblings);
++		ylist_del_init(&hl->hardLinks);
++		ylist_del_init(&hl->siblings);
+ 
+ 		yaffs_GetObjectName(hl, name, YAFFS_MAX_NAME_LENGTH + 1);
+ 
+ 		retVal = yaffs_ChangeObjectName(obj, hl->parent, name, 0, 0);
+ 
+-		if (retVal == YAFFS_OK) {
++		if (retVal == YAFFS_OK)
+ 			retVal = yaffs_DoGenericObjectDeletion(hl);
+-		}
++
+ 		return retVal;
+ 
+-	} else {
++	} else if (immediateDeletion) {
+ 		switch (obj->variantType) {
+ 		case YAFFS_OBJECT_TYPE_FILE:
+-			return yaffs_UnlinkFile(obj);
++			return yaffs_DeleteFile(obj);
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_DIRECTORY:
+ 			return yaffs_DeleteDirectory(obj);
+@@ -5248,21 +5284,22 @@ static int yaffs_UnlinkWorker(yaffs_Obje
+ 		default:
+ 			return YAFFS_FAIL;
+ 		}
+-	}
++	} else
++		return yaffs_ChangeObjectName(obj, obj->myDev->unlinkedDir,
++					   _Y("unlinked"), 0, 0);
+ }
+ 
+ 
+-static int yaffs_UnlinkObject( yaffs_Object *obj)
++static int yaffs_UnlinkObject(yaffs_Object *obj)
+ {
+ 
+-	if (obj && obj->unlinkAllowed) {
++	if (obj && obj->unlinkAllowed)
+ 		return yaffs_UnlinkWorker(obj);
+-	}
+ 
+ 	return YAFFS_FAIL;
+ 
+ }
+-int yaffs_Unlink(yaffs_Object * dir, const YCHAR * name)
++int yaffs_Unlink(yaffs_Object *dir, const YCHAR *name)
+ {
+ 	yaffs_Object *obj;
+ 
+@@ -5272,8 +5309,8 @@ int yaffs_Unlink(yaffs_Object * dir, con
+ 
+ /*----------------------- Initialisation Scanning ---------------------- */
+ 
+-static void yaffs_HandleShadowedObject(yaffs_Device * dev, int objId,
+-				       int backwardScanning)
++static void yaffs_HandleShadowedObject(yaffs_Device *dev, int objId,
++				int backwardScanning)
+ {
+ 	yaffs_Object *obj;
+ 
+@@ -5286,9 +5323,8 @@ static void yaffs_HandleShadowedObject(y
+ 		/* Handle YAFFS2 case (backward scanning)
+ 		 * If the shadowed object exists then ignore.
+ 		 */
+-		if (yaffs_FindObjectByNumber(dev, objId)) {
++		if (yaffs_FindObjectByNumber(dev, objId))
+ 			return;
+-		}
+ 	}
+ 
+ 	/* Let's create it (if it does not exist) assuming it is a file so that it can do shrinking etc.
+@@ -5297,6 +5333,8 @@ static void yaffs_HandleShadowedObject(y
+ 	obj =
+ 	    yaffs_FindOrCreateObjectByNumber(dev, objId,
+ 					     YAFFS_OBJECT_TYPE_FILE);
++	if (!obj)
++		return;
+ 	yaffs_AddObjectToDirectory(dev->unlinkedDir, obj);
+ 	obj->variant.fileVariant.shrinkSize = 0;
+ 	obj->valid = 1;		/* So that we don't read any other info for this file */
+@@ -5325,44 +5363,77 @@ static void yaffs_HardlinkFixup(yaffs_De
+ 		if (in) {
+ 			/* Add the hardlink pointers */
+ 			hl->variant.hardLinkVariant.equivalentObject = in;
+-			list_add(&hl->hardLinks, &in->hardLinks);
++			ylist_add(&hl->hardLinks, &in->hardLinks);
+ 		} else {
+ 			/* Todo Need to report/handle this better.
+ 			 * Got a problem... hardlink to a non-existant object
+ 			 */
+ 			hl->variant.hardLinkVariant.equivalentObject = NULL;
+-			INIT_LIST_HEAD(&hl->hardLinks);
++			YINIT_LIST_HEAD(&hl->hardLinks);
+ 
+ 		}
+-
+ 	}
++}
++
++
+ 
++
++
++static int ybicmp(const void *a, const void *b)
++{
++	register int aseq = ((yaffs_BlockIndex *)a)->seq;
++	register int bseq = ((yaffs_BlockIndex *)b)->seq;
++	register int ablock = ((yaffs_BlockIndex *)a)->block;
++	register int bblock = ((yaffs_BlockIndex *)b)->block;
++	if (aseq == bseq)
++		return ablock - bblock;
++	else
++		return aseq - bseq;
+ }
+ 
+ 
++struct yaffs_ShadowFixerStruct {
++	int objectId;
++	int shadowedId;
++	struct yaffs_ShadowFixerStruct *next;
++};
++
+ 
++static void yaffs_StripDeletedObjects(yaffs_Device *dev)
++{
++	/*
++	*  Sort out state of unlinked and deleted objects after scanning.
++	*/
++	struct ylist_head *i;
++	struct ylist_head *n;
++	yaffs_Object *l;
+ 
++	/* Soft delete all the unlinked files */
++	ylist_for_each_safe(i, n,
++		&dev->unlinkedDir->variant.directoryVariant.children) {
++		if (i) {
++			l = ylist_entry(i, yaffs_Object, siblings);
++			yaffs_DeleteObject(l);
++		}
++	}
+ 
+-static int ybicmp(const void *a, const void *b){
+-    register int aseq = ((yaffs_BlockIndex *)a)->seq;
+-    register int bseq = ((yaffs_BlockIndex *)b)->seq;
+-    register int ablock = ((yaffs_BlockIndex *)a)->block;
+-    register int bblock = ((yaffs_BlockIndex *)b)->block;
+-    if( aseq == bseq )
+-        return ablock - bblock;
+-    else
+-        return aseq - bseq;
++	ylist_for_each_safe(i, n,
++		&dev->deletedDir->variant.directoryVariant.children) {
++		if (i) {
++			l = ylist_entry(i, yaffs_Object, siblings);
++			yaffs_DeleteObject(l);
++		}
++	}
+ 
+ }
+ 
+-static int yaffs_Scan(yaffs_Device * dev)
++static int yaffs_Scan(yaffs_Device *dev)
+ {
+ 	yaffs_ExtendedTags tags;
+ 	int blk;
+ 	int blockIterator;
+ 	int startIterator;
+ 	int endIterator;
+-	int nBlocksToScan = 0;
+ 	int result;
+ 
+ 	int chunk;
+@@ -5371,26 +5442,19 @@ static int yaffs_Scan(yaffs_Device * dev
+ 	yaffs_BlockState state;
+ 	yaffs_Object *hardList = NULL;
+ 	yaffs_BlockInfo *bi;
+-	int sequenceNumber;
++	__u32 sequenceNumber;
+ 	yaffs_ObjectHeader *oh;
+ 	yaffs_Object *in;
+ 	yaffs_Object *parent;
+-	int nBlocks = dev->internalEndBlock - dev->internalStartBlock + 1;
+ 
+ 	int alloc_failed = 0;
+ 
++	struct yaffs_ShadowFixerStruct *shadowFixerList = NULL;
++
+ 
+ 	__u8 *chunkData;
+ 
+-	yaffs_BlockIndex *blockIndex = NULL;
+ 
+-	if (dev->isYaffs2) {
+-		T(YAFFS_TRACE_SCAN,
+-		  (TSTR("yaffs_Scan is not for YAFFS2!" TENDSTR)));
+-		return YAFFS_FAIL;
+-	}
+-
+-	//TODO  Throw all the yaffs2 stuuf out of yaffs_Scan since it is only for yaffs1 format.
+ 
+ 	T(YAFFS_TRACE_SCAN,
+ 	  (TSTR("yaffs_Scan starts  intstartblk %d intendblk %d..." TENDSTR),
+@@ -5400,12 +5464,6 @@ static int yaffs_Scan(yaffs_Device * dev
+ 
+ 	dev->sequenceNumber = YAFFS_LOWEST_SEQUENCE_NUMBER;
+ 
+-	if (dev->isYaffs2) {
+-		blockIndex = YMALLOC(nBlocks * sizeof(yaffs_BlockIndex));
+-		if(!blockIndex)
+-			return YAFFS_FAIL;
+-	}
+-
+ 	/* Scan all the blocks to determine their state */
+ 	for (blk = dev->internalStartBlock; blk <= dev->internalEndBlock; blk++) {
+ 		bi = yaffs_GetBlockInfo(dev, blk);
+@@ -5418,6 +5476,9 @@ static int yaffs_Scan(yaffs_Device * dev
+ 		bi->blockState = state;
+ 		bi->sequenceNumber = sequenceNumber;
+ 
++		if (bi->sequenceNumber == YAFFS_SEQUENCE_BAD_BLOCK)
++			bi->blockState = state = YAFFS_BLOCK_STATE_DEAD;
++
+ 		T(YAFFS_TRACE_SCAN_DEBUG,
+ 		  (TSTR("Block scanning block %d state %d seq %d" TENDSTR), blk,
+ 		   state, sequenceNumber));
+@@ -5430,70 +5491,21 @@ static int yaffs_Scan(yaffs_Device * dev
+ 			  (TSTR("Block empty " TENDSTR)));
+ 			dev->nErasedBlocks++;
+ 			dev->nFreeChunks += dev->nChunksPerBlock;
+-		} else if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING) {
+-
+-			/* Determine the highest sequence number */
+-			if (dev->isYaffs2 &&
+-			    sequenceNumber >= YAFFS_LOWEST_SEQUENCE_NUMBER &&
+-			    sequenceNumber < YAFFS_HIGHEST_SEQUENCE_NUMBER) {
+-
+-				blockIndex[nBlocksToScan].seq = sequenceNumber;
+-				blockIndex[nBlocksToScan].block = blk;
+-
+-				nBlocksToScan++;
+-
+-				if (sequenceNumber >= dev->sequenceNumber) {
+-					dev->sequenceNumber = sequenceNumber;
+-				}
+-			} else if (dev->isYaffs2) {
+-				/* TODO: Nasty sequence number! */
+-				T(YAFFS_TRACE_SCAN,
+-				  (TSTR
+-				   ("Block scanning block %d has bad sequence number %d"
+-				    TENDSTR), blk, sequenceNumber));
+-
+-			}
+ 		}
+ 	}
+ 
+-	/* Sort the blocks
+-	 * Dungy old bubble sort for now...
+-	 */
+-	if (dev->isYaffs2) {
+-		yaffs_BlockIndex temp;
+-		int i;
+-		int j;
+-
+-		for (i = 0; i < nBlocksToScan; i++)
+-			for (j = i + 1; j < nBlocksToScan; j++)
+-				if (blockIndex[i].seq > blockIndex[j].seq) {
+-					temp = blockIndex[j];
+-					blockIndex[j] = blockIndex[i];
+-					blockIndex[i] = temp;
+-				}
+-	}
+-
+-	/* Now scan the blocks looking at the data. */
+-	if (dev->isYaffs2) {
+-		startIterator = 0;
+-		endIterator = nBlocksToScan - 1;
+-		T(YAFFS_TRACE_SCAN_DEBUG,
+-		  (TSTR("%d blocks to be scanned" TENDSTR), nBlocksToScan));
+-	} else {
+-		startIterator = dev->internalStartBlock;
+-		endIterator = dev->internalEndBlock;
+-	}
++	startIterator = dev->internalStartBlock;
++	endIterator = dev->internalEndBlock;
+ 
+ 	/* For each block.... */
+ 	for (blockIterator = startIterator; !alloc_failed && blockIterator <= endIterator;
+ 	     blockIterator++) {
+ 
+-		if (dev->isYaffs2) {
+-			/* get the block to scan in the correct order */
+-			blk = blockIndex[blockIterator].block;
+-		} else {
+-			blk = blockIterator;
+-		}
++		YYIELD();
++
++		YYIELD();
++
++		blk = blockIterator;
+ 
+ 		bi = yaffs_GetBlockInfo(dev, blk);
+ 		state = bi->blockState;
+@@ -5511,7 +5523,7 @@ static int yaffs_Scan(yaffs_Device * dev
+ 
+ 			/* Let's have a good look at this chunk... */
+ 
+-			if (!dev->isYaffs2 && tags.chunkDeleted) {
++			if (tags.eccResult == YAFFS_ECC_RESULT_UNFIXED || tags.chunkDeleted) {
+ 				/* YAFFS1 only...
+ 				 * A deleted chunk
+ 				 */
+@@ -5540,18 +5552,6 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					dev->allocationBlockFinder = blk;
+ 					/* Set it to here to encourage the allocator to go forth from here. */
+ 
+-					/* Yaffs2 sanity check:
+-					 * This should be the one with the highest sequence number
+-					 */
+-					if (dev->isYaffs2
+-					    && (dev->sequenceNumber !=
+-						bi->sequenceNumber)) {
+-						T(YAFFS_TRACE_ALWAYS,
+-						  (TSTR
+-						   ("yaffs: Allocation block %d was not highest sequence id:"
+-						    " block seq = %d, dev seq = %d"
+-						    TENDSTR), blk,bi->sequenceNumber,dev->sequenceNumber));
+-					}
+ 				}
+ 
+ 				dev->nFreeChunks += (dev->nChunksPerBlock - c);
+@@ -5570,11 +5570,11 @@ static int yaffs_Scan(yaffs_Device * dev
+ 				 * the same chunkId).
+ 				 */
+ 
+-				if(!in)
++				if (!in)
+ 					alloc_failed = 1;
+ 
+-				if(in){
+-					if(!yaffs_PutChunkIntoFile(in, tags.chunkId, chunk,1))
++				if (in) {
++					if (!yaffs_PutChunkIntoFile(in, tags.chunkId, chunk, 1))
+ 						alloc_failed = 1;
+ 				}
+ 
+@@ -5617,7 +5617,7 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					 * deleted, and worse still it has changed type. Delete the old object.
+ 					 */
+ 
+-					yaffs_DestroyObject(in);
++					yaffs_DeleteObject(in);
+ 
+ 					in = 0;
+ 				}
+@@ -5627,14 +5627,20 @@ static int yaffs_Scan(yaffs_Device * dev
+ 								      objectId,
+ 								      oh->type);
+ 
+-				if(!in)
++				if (!in)
+ 					alloc_failed = 1;
+ 
+ 				if (in && oh->shadowsObject > 0) {
+-					yaffs_HandleShadowedObject(dev,
+-								   oh->
+-								   shadowsObject,
+-								   0);
++
++					struct yaffs_ShadowFixerStruct *fixer;
++					fixer = YMALLOC(sizeof(struct yaffs_ShadowFixerStruct));
++					if (fixer) {
++						fixer->next = shadowFixerList;
++						shadowFixerList = fixer;
++						fixer->objectId = tags.objectId;
++						fixer->shadowedId = oh->shadowsObject;
++					}
++
+ 				}
+ 
+ 				if (in && in->valid) {
+@@ -5643,12 +5649,10 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					unsigned existingSerial = in->serial;
+ 					unsigned newSerial = tags.serialNumber;
+ 
+-					if (dev->isYaffs2 ||
+-					    ((existingSerial + 1) & 3) ==
+-					    newSerial) {
++					if (((existingSerial + 1) & 3) == newSerial) {
+ 						/* Use new one - destroy the exisiting one */
+ 						yaffs_DeleteChunk(dev,
+-								  in->chunkId,
++								  in->hdrChunk,
+ 								  1, __LINE__);
+ 						in->valid = 0;
+ 					} else {
+@@ -5681,7 +5685,8 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					in->yst_ctime = oh->yst_ctime;
+ 					in->yst_rdev = oh->yst_rdev;
+ #endif
+-					in->chunkId = chunk;
++					in->hdrChunk = chunk;
++					in->serial = tags.serialNumber;
+ 
+ 				} else if (in && !in->valid) {
+ 					/* we need to load this info */
+@@ -5705,7 +5710,8 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					in->yst_ctime = oh->yst_ctime;
+ 					in->yst_rdev = oh->yst_rdev;
+ #endif
+-					in->chunkId = chunk;
++					in->hdrChunk = chunk;
++					in->serial = tags.serialNumber;
+ 
+ 					yaffs_SetObjectName(in, oh->name);
+ 					in->dirty = 0;
+@@ -5718,25 +5724,25 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					    yaffs_FindOrCreateObjectByNumber
+ 					    (dev, oh->parentObjectId,
+ 					     YAFFS_OBJECT_TYPE_DIRECTORY);
+-					if (parent->variantType ==
++					if (!parent)
++						alloc_failed = 1;
++					if (parent && parent->variantType ==
+ 					    YAFFS_OBJECT_TYPE_UNKNOWN) {
+ 						/* Set up as a directory */
+ 						parent->variantType =
+-						    YAFFS_OBJECT_TYPE_DIRECTORY;
+-						INIT_LIST_HEAD(&parent->variant.
+-							       directoryVariant.
+-							       children);
+-					} else if (parent->variantType !=
+-						   YAFFS_OBJECT_TYPE_DIRECTORY)
+-					{
++							YAFFS_OBJECT_TYPE_DIRECTORY;
++						YINIT_LIST_HEAD(&parent->variant.
++								directoryVariant.
++								children);
++					} else if (!parent || parent->variantType !=
++						   YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 						/* Hoosterman, another problem....
+ 						 * We're trying to use a non-directory as a directory
+ 						 */
+ 
+ 						T(YAFFS_TRACE_ERROR,
+ 						  (TSTR
+-						   ("yaffs tragedy: attempting to use non-directory as"
+-						    " a directory in scan. Put in lost+found."
++						   ("yaffs tragedy: attempting to use non-directory as a directory in scan. Put in lost+found."
+ 						    TENDSTR)));
+ 						parent = dev->lostNFoundDir;
+ 					}
+@@ -5760,15 +5766,6 @@ static int yaffs_Scan(yaffs_Device * dev
+ 						/* Todo got a problem */
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_FILE:
+-						if (dev->isYaffs2
+-						    && oh->isShrink) {
+-							/* Prune back the shrunken chunks */
+-							yaffs_PruneResizedChunks
+-							    (in, oh->fileSize);
+-							/* Mark the block as having a shrinkHeader */
+-							bi->hasShrinkHeader = 1;
+-						}
+-
+ 						if (dev->useHeaderFileSize)
+ 
+ 							in->variant.fileVariant.
+@@ -5778,11 +5775,11 @@ static int yaffs_Scan(yaffs_Device * dev
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_HARDLINK:
+ 						in->variant.hardLinkVariant.
+-						    equivalentObjectId =
+-						    oh->equivalentObjectId;
++							equivalentObjectId =
++							oh->equivalentObjectId;
+ 						in->hardLinks.next =
+-						    (struct list_head *)
+-						    hardList;
++							(struct ylist_head *)
++							hardList;
+ 						hardList = in;
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_DIRECTORY:
+@@ -5794,15 +5791,17 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					case YAFFS_OBJECT_TYPE_SYMLINK:
+ 						in->variant.symLinkVariant.alias =
+ 						    yaffs_CloneString(oh->alias);
+-						if(!in->variant.symLinkVariant.alias)
++						if (!in->variant.symLinkVariant.alias)
+ 							alloc_failed = 1;
+ 						break;
+ 					}
+ 
++/*
+ 					if (parent == dev->deletedDir) {
+ 						yaffs_DestroyObject(in);
+ 						bi->hasShrinkHeader = 1;
+ 					}
++*/
+ 				}
+ 			}
+ 		}
+@@ -5823,10 +5822,6 @@ static int yaffs_Scan(yaffs_Device * dev
+ 
+ 	}
+ 
+-	if (blockIndex) {
+-		YFREE(blockIndex);
+-	}
+-
+ 
+ 	/* Ok, we've done all the scanning.
+ 	 * Fix up the hard link chains.
+@@ -5834,32 +5829,36 @@ static int yaffs_Scan(yaffs_Device * dev
+ 	 * hardlinks.
+ 	 */
+ 
+-	yaffs_HardlinkFixup(dev,hardList);
++	yaffs_HardlinkFixup(dev, hardList);
+ 
+-	/* Handle the unlinked files. Since they were left in an unlinked state we should
+-	 * just delete them.
+-	 */
++	/* Fix up any shadowed objects */
+ 	{
+-		struct list_head *i;
+-		struct list_head *n;
++		struct yaffs_ShadowFixerStruct *fixer;
++		yaffs_Object *obj;
+ 
+-		yaffs_Object *l;
+-		/* Soft delete all the unlinked files */
+-		list_for_each_safe(i, n,
+-				   &dev->unlinkedDir->variant.directoryVariant.
+-				   children) {
+-			if (i) {
+-				l = list_entry(i, yaffs_Object, siblings);
+-				yaffs_DestroyObject(l);
+-			}
++		while (shadowFixerList) {
++			fixer = shadowFixerList;
++			shadowFixerList = fixer->next;
++			/* Complete the rename transaction by deleting the shadowed object
++			 * then setting the object header to unshadowed.
++			 */
++			obj = yaffs_FindObjectByNumber(dev, fixer->shadowedId);
++			if (obj)
++				yaffs_DeleteObject(obj);
++
++			obj = yaffs_FindObjectByNumber(dev, fixer->objectId);
++
++			if (obj)
++				yaffs_UpdateObjectHeader(obj, NULL, 1, 0, 0);
++
++			YFREE(fixer);
+ 		}
+ 	}
+ 
+ 	yaffs_ReleaseTempBuffer(dev, chunkData, __LINE__);
+ 
+-	if(alloc_failed){
++	if (alloc_failed)
+ 		return YAFFS_FAIL;
+-	}
+ 
+ 	T(YAFFS_TRACE_SCAN, (TSTR("yaffs_Scan ends" TENDSTR)));
+ 
+@@ -5871,25 +5870,27 @@ static void yaffs_CheckObjectDetailsLoad
+ {
+ 	__u8 *chunkData;
+ 	yaffs_ObjectHeader *oh;
+-	yaffs_Device *dev = in->myDev;
++	yaffs_Device *dev;
+ 	yaffs_ExtendedTags tags;
+ 	int result;
+ 	int alloc_failed = 0;
+ 
+-	if(!in)
++	if (!in)
+ 		return;
+ 
++	dev = in->myDev;
++
+ #if 0
+-	T(YAFFS_TRACE_SCAN,(TSTR("details for object %d %s loaded" TENDSTR),
++	T(YAFFS_TRACE_SCAN, (TSTR("details for object %d %s loaded" TENDSTR),
+ 		in->objectId,
+ 		in->lazyLoaded ? "not yet" : "already"));
+ #endif
+ 
+-	if(in->lazyLoaded){
++	if (in->lazyLoaded && in->hdrChunk > 0) {
+ 		in->lazyLoaded = 0;
+ 		chunkData = yaffs_GetTempBuffer(dev, __LINE__);
+ 
+-		result = yaffs_ReadChunkWithTagsFromNAND(dev,in->chunkId,chunkData,&tags);
++		result = yaffs_ReadChunkWithTagsFromNAND(dev, in->hdrChunk, chunkData, &tags);
+ 		oh = (yaffs_ObjectHeader *) chunkData;
+ 
+ 		in->yst_mode = oh->yst_mode;
+@@ -5911,18 +5912,18 @@ static void yaffs_CheckObjectDetailsLoad
+ #endif
+ 		yaffs_SetObjectName(in, oh->name);
+ 
+-		if(in->variantType == YAFFS_OBJECT_TYPE_SYMLINK){
+-			 in->variant.symLinkVariant.alias =
++		if (in->variantType == YAFFS_OBJECT_TYPE_SYMLINK) {
++			in->variant.symLinkVariant.alias =
+ 						    yaffs_CloneString(oh->alias);
+-			if(!in->variant.symLinkVariant.alias)
++			if (!in->variant.symLinkVariant.alias)
+ 				alloc_failed = 1; /* Not returned to caller */
+ 		}
+ 
+-		yaffs_ReleaseTempBuffer(dev,chunkData, __LINE__);
++		yaffs_ReleaseTempBuffer(dev, chunkData, __LINE__);
+ 	}
+ }
+ 
+-static int yaffs_ScanBackwards(yaffs_Device * dev)
++static int yaffs_ScanBackwards(yaffs_Device *dev)
+ {
+ 	yaffs_ExtendedTags tags;
+ 	int blk;
+@@ -5938,7 +5939,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 	yaffs_BlockState state;
+ 	yaffs_Object *hardList = NULL;
+ 	yaffs_BlockInfo *bi;
+-	int sequenceNumber;
++	__u32 sequenceNumber;
+ 	yaffs_ObjectHeader *oh;
+ 	yaffs_Object *in;
+ 	yaffs_Object *parent;
+@@ -5972,12 +5973,12 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 	blockIndex = YMALLOC(nBlocks * sizeof(yaffs_BlockIndex));
+ 
+-	if(!blockIndex) {
++	if (!blockIndex) {
+ 		blockIndex = YMALLOC_ALT(nBlocks * sizeof(yaffs_BlockIndex));
+ 		altBlockIndex = 1;
+ 	}
+ 
+-	if(!blockIndex) {
++	if (!blockIndex) {
+ 		T(YAFFS_TRACE_SCAN,
+ 		  (TSTR("yaffs_Scan() could not allocate block index!" TENDSTR)));
+ 		return YAFFS_FAIL;
+@@ -5999,15 +6000,17 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 		bi->blockState = state;
+ 		bi->sequenceNumber = sequenceNumber;
+ 
+-		if(bi->sequenceNumber == YAFFS_SEQUENCE_CHECKPOINT_DATA)
++		if (bi->sequenceNumber == YAFFS_SEQUENCE_CHECKPOINT_DATA)
+ 			bi->blockState = state = YAFFS_BLOCK_STATE_CHECKPOINT;
++		if (bi->sequenceNumber == YAFFS_SEQUENCE_BAD_BLOCK)
++			bi->blockState = state = YAFFS_BLOCK_STATE_DEAD;
+ 
+ 		T(YAFFS_TRACE_SCAN_DEBUG,
+ 		  (TSTR("Block scanning block %d state %d seq %d" TENDSTR), blk,
+ 		   state, sequenceNumber));
+ 
+ 
+-		if(state == YAFFS_BLOCK_STATE_CHECKPOINT){
++		if (state == YAFFS_BLOCK_STATE_CHECKPOINT) {
+ 			dev->blocksInCheckpoint++;
+ 
+ 		} else if (state == YAFFS_BLOCK_STATE_DEAD) {
+@@ -6021,8 +6024,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 		} else if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING) {
+ 
+ 			/* Determine the highest sequence number */
+-			if (dev->isYaffs2 &&
+-			    sequenceNumber >= YAFFS_LOWEST_SEQUENCE_NUMBER &&
++			if (sequenceNumber >= YAFFS_LOWEST_SEQUENCE_NUMBER &&
+ 			    sequenceNumber < YAFFS_HIGHEST_SEQUENCE_NUMBER) {
+ 
+ 				blockIndex[nBlocksToScan].seq = sequenceNumber;
+@@ -6030,10 +6032,9 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 				nBlocksToScan++;
+ 
+-				if (sequenceNumber >= dev->sequenceNumber) {
++				if (sequenceNumber >= dev->sequenceNumber)
+ 					dev->sequenceNumber = sequenceNumber;
+-				}
+-			} else if (dev->isYaffs2) {
++			} else {
+ 				/* TODO: Nasty sequence number! */
+ 				T(YAFFS_TRACE_SCAN,
+ 				  (TSTR
+@@ -6053,11 +6054,13 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 	/* Sort the blocks */
+ #ifndef CONFIG_YAFFS_USE_OWN_SORT
+-	yaffs_qsort(blockIndex, nBlocksToScan,
+-		sizeof(yaffs_BlockIndex), ybicmp);
++	{
++		/* Use qsort now. */
++		yaffs_qsort(blockIndex, nBlocksToScan, sizeof(yaffs_BlockIndex), ybicmp);
++	}
+ #else
+ 	{
+-	 	/* Dungy old bubble sort... */
++		/* Dungy old bubble sort... */
+ 
+ 		yaffs_BlockIndex temp;
+ 		int i;
+@@ -6075,7 +6078,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 	YYIELD();
+ 
+-    	T(YAFFS_TRACE_SCAN, (TSTR("...done" TENDSTR)));
++	T(YAFFS_TRACE_SCAN, (TSTR("...done" TENDSTR)));
+ 
+ 	/* Now scan the blocks looking at the data. */
+ 	startIterator = 0;
+@@ -6085,10 +6088,10 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 	/* For each block.... backwards */
+ 	for (blockIterator = endIterator; !alloc_failed && blockIterator >= startIterator;
+-	     blockIterator--) {
+-	        /* Cooperative multitasking! This loop can run for so
++			blockIterator--) {
++		/* Cooperative multitasking! This loop can run for so
+ 		   long that watchdog timers expire. */
+-	        YYIELD();
++		YYIELD();
+ 
+ 		/* get the block to scan in the correct order */
+ 		blk = blockIndex[blockIterator].block;
+@@ -6127,10 +6130,8 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 				 * this is the one being allocated from
+ 				 */
+ 
+-				if(foundChunksInBlock)
+-				{
++				if (foundChunksInBlock) {
+ 					/* This is a chunk that was skipped due to failing the erased check */
+-
+ 				} else if (c == 0) {
+ 					/* We're looking at the first chunk in the block so the block is unused */
+ 					state = YAFFS_BLOCK_STATE_EMPTY;
+@@ -6138,7 +6139,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 				} else {
+ 					if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING ||
+ 					    state == YAFFS_BLOCK_STATE_ALLOCATING) {
+-					    	if(dev->sequenceNumber == bi->sequenceNumber) {
++						if (dev->sequenceNumber == bi->sequenceNumber) {
+ 							/* this is the block being allocated from */
+ 
+ 							T(YAFFS_TRACE_SCAN,
+@@ -6150,27 +6151,31 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 							dev->allocationBlock = blk;
+ 							dev->allocationPage = c;
+ 							dev->allocationBlockFinder = blk;
+-						}
+-						else {
++						} else {
+ 							/* This is a partially written block that is not
+ 							 * the current allocation block. This block must have
+ 							 * had a write failure, so set up for retirement.
+ 							 */
+ 
+-							 bi->needsRetiring = 1;
++							 /* bi->needsRetiring = 1; ??? TODO */
+ 							 bi->gcPrioritise = 1;
+ 
+ 							 T(YAFFS_TRACE_ALWAYS,
+-							 (TSTR("Partially written block %d being set for retirement" TENDSTR),
++							 (TSTR("Partially written block %d detected" TENDSTR),
+ 							 blk));
+ 						}
+-
+ 					}
+-
+ 				}
+ 
+ 				dev->nFreeChunks++;
+ 
++			} else if (tags.eccResult == YAFFS_ECC_RESULT_UNFIXED) {
++				T(YAFFS_TRACE_SCAN,
++				  (TSTR(" Unfixed ECC in chunk(%d:%d), chunk ignored"TENDSTR),
++				  blk, c));
++
++				  dev->nFreeChunks++;
++
+ 			} else if (tags.chunkId > 0) {
+ 				/* chunkId > 0 so it is a data chunk... */
+ 				unsigned int endpos;
+@@ -6187,7 +6192,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 								      tags.
+ 								      objectId,
+ 								      YAFFS_OBJECT_TYPE_FILE);
+-				if(!in){
++				if (!in) {
+ 					/* Out of memory */
+ 					alloc_failed = 1;
+ 				}
+@@ -6197,8 +6202,8 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 				    && chunkBase <
+ 				    in->variant.fileVariant.shrinkSize) {
+ 					/* This has not been invalidated by a resize */
+-					if(!yaffs_PutChunkIntoFile(in, tags.chunkId,
+-							       chunk, -1)){
++					if (!yaffs_PutChunkIntoFile(in, tags.chunkId,
++							       chunk, -1)) {
+ 						alloc_failed = 1;
+ 					}
+ 
+@@ -6221,7 +6226,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 						    scannedFileSize;
+ 					}
+ 
+-				} else if(in) {
++				} else if (in) {
+ 					/* This chunk has been invalidated by a resize, so delete */
+ 					yaffs_DeleteChunk(dev, chunk, 1, __LINE__);
+ 
+@@ -6242,6 +6247,8 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 					in = yaffs_FindOrCreateObjectByNumber
+ 					    (dev, tags.objectId,
+ 					     tags.extraObjectType);
++					if (!in)
++						alloc_failed = 1;
+ 				}
+ 
+ 				if (!in ||
+@@ -6251,8 +6258,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 				    tags.extraShadows ||
+ 				    (!in->valid &&
+ 				    (tags.objectId == YAFFS_OBJECTID_ROOT ||
+-				     tags.objectId == YAFFS_OBJECTID_LOSTNFOUND))
+-				    ) {
++				     tags.objectId == YAFFS_OBJECTID_LOSTNFOUND))) {
+ 
+ 					/* If we don't have  valid info then we need to read the chunk
+ 					 * TODO In future we can probably defer reading the chunk and
+@@ -6266,8 +6272,17 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 					oh = (yaffs_ObjectHeader *) chunkData;
+ 
+-					if (!in)
++					if (dev->inbandTags) {
++						/* Fix up the header if they got corrupted by inband tags */
++						oh->shadowsObject = oh->inbandShadowsObject;
++						oh->isShrink = oh->inbandIsShrink;
++					}
++
++					if (!in) {
+ 						in = yaffs_FindOrCreateObjectByNumber(dev, tags.objectId, oh->type);
++						if (!in)
++							alloc_failed = 1;
++					}
+ 
+ 				}
+ 
+@@ -6275,10 +6290,9 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 					/* TODO Hoosterman we have a problem! */
+ 					T(YAFFS_TRACE_ERROR,
+ 					  (TSTR
+-					   ("yaffs tragedy: Could not make object for object  %d  "
+-					    "at chunk %d during scan"
++					   ("yaffs tragedy: Could not make object for object  %d at chunk %d during scan"
+ 					    TENDSTR), tags.objectId, chunk));
+-
++					continue;
+ 				}
+ 
+ 				if (in->valid) {
+@@ -6289,10 +6303,9 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 					if ((in->variantType == YAFFS_OBJECT_TYPE_FILE) &&
+ 					     ((oh &&
+-					       oh-> type == YAFFS_OBJECT_TYPE_FILE)||
++					       oh->type == YAFFS_OBJECT_TYPE_FILE) ||
+ 					      (tags.extraHeaderInfoAvailable  &&
+-					       tags.extraObjectType == YAFFS_OBJECT_TYPE_FILE))
+-					    ) {
++					       tags.extraObjectType == YAFFS_OBJECT_TYPE_FILE))) {
+ 						__u32 thisSize =
+ 						    (oh) ? oh->fileSize : tags.
+ 						    extraFileLength;
+@@ -6300,7 +6313,9 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 						    (oh) ? oh->
+ 						    parentObjectId : tags.
+ 						    extraParentObjectId;
+-						unsigned isShrink =
++
++
++						isShrink =
+ 						    (oh) ? oh->isShrink : tags.
+ 						    extraIsShrinkHeader;
+ 
+@@ -6323,9 +6338,8 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 							    thisSize;
+ 						}
+ 
+-						if (isShrink) {
++						if (isShrink)
+ 							bi->hasShrinkHeader = 1;
+-						}
+ 
+ 					}
+ 					/* Use existing - destroy this one. */
+@@ -6333,6 +6347,17 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 				}
+ 
++				if (!in->valid && in->variantType !=
++				    (oh ? oh->type : tags.extraObjectType))
++					T(YAFFS_TRACE_ERROR, (
++						TSTR("yaffs tragedy: Bad object type, "
++					    TCONT("%d != %d, for object %d at chunk ")
++					    TCONT("%d during scan")
++						TENDSTR), oh ?
++					    oh->type : tags.extraObjectType,
++					    in->variantType, tags.objectId,
++					    chunk));
++
+ 				if (!in->valid &&
+ 				    (tags.objectId == YAFFS_OBJECTID_ROOT ||
+ 				     tags.objectId ==
+@@ -6340,7 +6365,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 					/* We only load some info, don't fiddle with directory structure */
+ 					in->valid = 1;
+ 
+-					if(oh) {
++					if (oh) {
+ 						in->variantType = oh->type;
+ 
+ 						in->yst_mode = oh->yst_mode;
+@@ -6365,15 +6390,15 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 						in->lazyLoaded = 1;
+ 					}
+ 
+-					in->chunkId = chunk;
++					in->hdrChunk = chunk;
+ 
+ 				} else if (!in->valid) {
+ 					/* we need to load this info */
+ 
+ 					in->valid = 1;
+-					in->chunkId = chunk;
++					in->hdrChunk = chunk;
+ 
+-					if(oh) {
++					if (oh) {
+ 						in->variantType = oh->type;
+ 
+ 						in->yst_mode = oh->yst_mode;
+@@ -6403,20 +6428,19 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 						yaffs_SetObjectName(in, oh->name);
+ 						parent =
+ 						    yaffs_FindOrCreateObjectByNumber
+-					    		(dev, oh->parentObjectId,
+-					     		 YAFFS_OBJECT_TYPE_DIRECTORY);
++							(dev, oh->parentObjectId,
++							 YAFFS_OBJECT_TYPE_DIRECTORY);
+ 
+ 						 fileSize = oh->fileSize;
+- 						 isShrink = oh->isShrink;
++						 isShrink = oh->isShrink;
+ 						 equivalentObjectId = oh->equivalentObjectId;
+ 
+-					}
+-					else {
++					} else {
+ 						in->variantType = tags.extraObjectType;
+ 						parent =
+ 						    yaffs_FindOrCreateObjectByNumber
+-					    		(dev, tags.extraParentObjectId,
+-					     		 YAFFS_OBJECT_TYPE_DIRECTORY);
++							(dev, tags.extraParentObjectId,
++							 YAFFS_OBJECT_TYPE_DIRECTORY);
+ 						 fileSize = tags.extraFileLength;
+ 						 isShrink = tags.extraIsShrinkHeader;
+ 						 equivalentObjectId = tags.extraEquivalentObjectId;
+@@ -6425,29 +6449,30 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 					}
+ 					in->dirty = 0;
+ 
++					if (!parent)
++						alloc_failed = 1;
++
+ 					/* directory stuff...
+ 					 * hook up to parent
+ 					 */
+ 
+-					if (parent->variantType ==
++					if (parent && parent->variantType ==
+ 					    YAFFS_OBJECT_TYPE_UNKNOWN) {
+ 						/* Set up as a directory */
+ 						parent->variantType =
+-						    YAFFS_OBJECT_TYPE_DIRECTORY;
+-						INIT_LIST_HEAD(&parent->variant.
+-							       directoryVariant.
+-							       children);
+-					} else if (parent->variantType !=
+-						   YAFFS_OBJECT_TYPE_DIRECTORY)
+-					{
++							YAFFS_OBJECT_TYPE_DIRECTORY;
++						YINIT_LIST_HEAD(&parent->variant.
++							directoryVariant.
++							children);
++					} else if (!parent || parent->variantType !=
++						   YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 						/* Hoosterman, another problem....
+ 						 * We're trying to use a non-directory as a directory
+ 						 */
+ 
+ 						T(YAFFS_TRACE_ERROR,
+ 						  (TSTR
+-						   ("yaffs tragedy: attempting to use non-directory as"
+-						    " a directory in scan. Put in lost+found."
++						   ("yaffs tragedy: attempting to use non-directory as a directory in scan. Put in lost+found."
+ 						    TENDSTR)));
+ 						parent = dev->lostNFoundDir;
+ 					}
+@@ -6494,12 +6519,12 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_HARDLINK:
+-						if(!itsUnlinked) {
+-						  in->variant.hardLinkVariant.equivalentObjectId =
+-						    equivalentObjectId;
+-						  in->hardLinks.next =
+-						    (struct list_head *) hardList;
+-						  hardList = in;
++						if (!itsUnlinked) {
++							in->variant.hardLinkVariant.equivalentObjectId =
++								equivalentObjectId;
++							in->hardLinks.next =
++								(struct ylist_head *) hardList;
++							hardList = in;
+ 						}
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_DIRECTORY:
+@@ -6509,12 +6534,11 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 						/* Do nothing */
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_SYMLINK:
+-						if(oh){
+-						   in->variant.symLinkVariant.alias =
+-						    yaffs_CloneString(oh->
+-								      alias);
+-						   if(!in->variant.symLinkVariant.alias)
+-						   	alloc_failed = 1;
++						if (oh) {
++							in->variant.symLinkVariant.alias =
++								yaffs_CloneString(oh->alias);
++							if (!in->variant.symLinkVariant.alias)
++								alloc_failed = 1;
+ 						}
+ 						break;
+ 					}
+@@ -6551,75 +6575,129 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 	 * We should now have scanned all the objects, now it's time to add these
+ 	 * hardlinks.
+ 	 */
+-	yaffs_HardlinkFixup(dev,hardList);
++	yaffs_HardlinkFixup(dev, hardList);
+ 
+ 
+-	/*
+-	*  Sort out state of unlinked and deleted objects.
+-	*/
+-	{
+-		struct list_head *i;
+-		struct list_head *n;
++	yaffs_ReleaseTempBuffer(dev, chunkData, __LINE__);
+ 
+-		yaffs_Object *l;
++	if (alloc_failed)
++		return YAFFS_FAIL;
+ 
+-		/* Soft delete all the unlinked files */
+-		list_for_each_safe(i, n,
+-				   &dev->unlinkedDir->variant.directoryVariant.
+-				   children) {
+-			if (i) {
+-				l = list_entry(i, yaffs_Object, siblings);
+-				yaffs_DestroyObject(l);
+-			}
+-		}
++	T(YAFFS_TRACE_SCAN, (TSTR("yaffs_ScanBackwards ends" TENDSTR)));
+ 
+-		/* Soft delete all the deletedDir files */
+-		list_for_each_safe(i, n,
+-				   &dev->deletedDir->variant.directoryVariant.
+-				   children) {
+-			if (i) {
+-				l = list_entry(i, yaffs_Object, siblings);
+-				yaffs_DestroyObject(l);
++	return YAFFS_OK;
++}
+ 
+-			}
++/*------------------------------  Directory Functions ----------------------------- */
++
++static void yaffs_VerifyObjectInDirectory(yaffs_Object *obj)
++{
++	struct ylist_head *lh;
++	yaffs_Object *listObj;
++
++	int count = 0;
++
++	if (!obj) {
++		T(YAFFS_TRACE_ALWAYS, (TSTR("No object to verify" TENDSTR)));
++		YBUG();
++		return;
++	}
++
++	if (yaffs_SkipVerification(obj->myDev))
++		return;
++
++	if (!obj->parent) {
++		T(YAFFS_TRACE_ALWAYS, (TSTR("Object does not have parent" TENDSTR)));
++		YBUG();
++		return;
++	}
++
++	if (obj->parent->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
++		T(YAFFS_TRACE_ALWAYS, (TSTR("Parent is not directory" TENDSTR)));
++		YBUG();
++	}
++
++	/* Iterate through the objects in each hash entry */
++
++	ylist_for_each(lh, &obj->parent->variant.directoryVariant.children) {
++		if (lh) {
++			listObj = ylist_entry(lh, yaffs_Object, siblings);
++			yaffs_VerifyObject(listObj);
++			if (obj == listObj)
++				count++;
+ 		}
++	 }
++
++	if (count != 1) {
++		T(YAFFS_TRACE_ALWAYS, (TSTR("Object in directory %d times" TENDSTR), count));
++		YBUG();
+ 	}
++}
+ 
+-	yaffs_ReleaseTempBuffer(dev, chunkData, __LINE__);
++static void yaffs_VerifyDirectory(yaffs_Object *directory)
++{
++	struct ylist_head *lh;
++	yaffs_Object *listObj;
+ 
+-	if(alloc_failed){
+-		return YAFFS_FAIL;
++	if (!directory) {
++		YBUG();
++		return;
+ 	}
+ 
+-	T(YAFFS_TRACE_SCAN, (TSTR("yaffs_ScanBackwards ends" TENDSTR)));
++	if (yaffs_SkipFullVerification(directory->myDev))
++		return;
+ 
+-	return YAFFS_OK;
++	if (directory->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
++		T(YAFFS_TRACE_ALWAYS, (TSTR("Directory has wrong type: %d" TENDSTR), directory->variantType));
++		YBUG();
++	}
++
++	/* Iterate through the objects in each hash entry */
++
++	ylist_for_each(lh, &directory->variant.directoryVariant.children) {
++		if (lh) {
++			listObj = ylist_entry(lh, yaffs_Object, siblings);
++			if (listObj->parent != directory) {
++				T(YAFFS_TRACE_ALWAYS, (TSTR("Object in directory list has wrong parent %p" TENDSTR), listObj->parent));
++				YBUG();
++			}
++			yaffs_VerifyObjectInDirectory(listObj);
++		}
++	}
+ }
+ 
+-/*------------------------------  Directory Functions ----------------------------- */
+ 
+-static void yaffs_RemoveObjectFromDirectory(yaffs_Object * obj)
++static void yaffs_RemoveObjectFromDirectory(yaffs_Object *obj)
+ {
+ 	yaffs_Device *dev = obj->myDev;
++	yaffs_Object *parent;
++
++	yaffs_VerifyObjectInDirectory(obj);
++	parent = obj->parent;
++
++	yaffs_VerifyDirectory(parent);
+ 
+-	if(dev && dev->removeObjectCallback)
++	if (dev && dev->removeObjectCallback)
+ 		dev->removeObjectCallback(obj);
+ 
+-	list_del_init(&obj->siblings);
++
++	ylist_del_init(&obj->siblings);
+ 	obj->parent = NULL;
++
++	yaffs_VerifyDirectory(parent);
+ }
+ 
+ 
+-static void yaffs_AddObjectToDirectory(yaffs_Object * directory,
+-				       yaffs_Object * obj)
++static void yaffs_AddObjectToDirectory(yaffs_Object *directory,
++					yaffs_Object *obj)
+ {
+-
+ 	if (!directory) {
+ 		T(YAFFS_TRACE_ALWAYS,
+ 		  (TSTR
+ 		   ("tragedy: Trying to add an object to a null pointer directory"
+ 		    TENDSTR)));
+ 		YBUG();
++		return;
+ 	}
+ 	if (directory->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 		T(YAFFS_TRACE_ALWAYS,
+@@ -6631,37 +6709,42 @@ static void yaffs_AddObjectToDirectory(y
+ 
+ 	if (obj->siblings.prev == NULL) {
+ 		/* Not initialised */
+-		INIT_LIST_HEAD(&obj->siblings);
+-
+-	} else if (!list_empty(&obj->siblings)) {
+-		/* If it is holed up somewhere else, un hook it */
+-		yaffs_RemoveObjectFromDirectory(obj);
++		YBUG();
+ 	}
++
++
++	yaffs_VerifyDirectory(directory);
++
++	yaffs_RemoveObjectFromDirectory(obj);
++
++
+ 	/* Now add it */
+-	list_add(&obj->siblings, &directory->variant.directoryVariant.children);
++	ylist_add(&obj->siblings, &directory->variant.directoryVariant.children);
+ 	obj->parent = directory;
+ 
+ 	if (directory == obj->myDev->unlinkedDir
+-	    || directory == obj->myDev->deletedDir) {
++			|| directory == obj->myDev->deletedDir) {
+ 		obj->unlinked = 1;
+ 		obj->myDev->nUnlinkedFiles++;
+ 		obj->renameAllowed = 0;
+ 	}
++
++	yaffs_VerifyDirectory(directory);
++	yaffs_VerifyObjectInDirectory(obj);
+ }
+ 
+-yaffs_Object *yaffs_FindObjectByName(yaffs_Object * directory,
+-				     const YCHAR * name)
++yaffs_Object *yaffs_FindObjectByName(yaffs_Object *directory,
++				     const YCHAR *name)
+ {
+ 	int sum;
+ 
+-	struct list_head *i;
++	struct ylist_head *i;
+ 	YCHAR buffer[YAFFS_MAX_NAME_LENGTH + 1];
+ 
+ 	yaffs_Object *l;
+ 
+-	if (!name) {
++	if (!name)
+ 		return NULL;
+-	}
+ 
+ 	if (!directory) {
+ 		T(YAFFS_TRACE_ALWAYS,
+@@ -6669,6 +6752,7 @@ yaffs_Object *yaffs_FindObjectByName(yaf
+ 		   ("tragedy: yaffs_FindObjectByName: null pointer directory"
+ 		    TENDSTR)));
+ 		YBUG();
++		return NULL;
+ 	}
+ 	if (directory->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 		T(YAFFS_TRACE_ALWAYS,
+@@ -6679,28 +6763,27 @@ yaffs_Object *yaffs_FindObjectByName(yaf
+ 
+ 	sum = yaffs_CalcNameSum(name);
+ 
+-	list_for_each(i, &directory->variant.directoryVariant.children) {
++	ylist_for_each(i, &directory->variant.directoryVariant.children) {
+ 		if (i) {
+-			l = list_entry(i, yaffs_Object, siblings);
++			l = ylist_entry(i, yaffs_Object, siblings);
++
++			if (l->parent != directory)
++				YBUG();
+ 
+ 			yaffs_CheckObjectDetailsLoaded(l);
+ 
+ 			/* Special case for lost-n-found */
+ 			if (l->objectId == YAFFS_OBJECTID_LOSTNFOUND) {
+-				if (yaffs_strcmp(name, YAFFS_LOSTNFOUND_NAME) == 0) {
++				if (yaffs_strcmp(name, YAFFS_LOSTNFOUND_NAME) == 0)
+ 					return l;
+-				}
+-			} else if (yaffs_SumCompare(l->sum, sum) || l->chunkId <= 0)
+-			{
+-				/* LostnFound cunk called Objxxx
++			} else if (yaffs_SumCompare(l->sum, sum) || l->hdrChunk <= 0) {
++				/* LostnFound chunk called Objxxx
+ 				 * Do a real check
+ 				 */
+ 				yaffs_GetObjectName(l, buffer,
+ 						    YAFFS_MAX_NAME_LENGTH);
+-				if (yaffs_strncmp(name, buffer,YAFFS_MAX_NAME_LENGTH) == 0) {
++				if (yaffs_strncmp(name, buffer, YAFFS_MAX_NAME_LENGTH) == 0)
+ 					return l;
+-				}
+-
+ 			}
+ 		}
+ 	}
+@@ -6710,10 +6793,10 @@ yaffs_Object *yaffs_FindObjectByName(yaf
+ 
+ 
+ #if 0
+-int yaffs_ApplyToDirectoryChildren(yaffs_Object * theDir,
+-				   int (*fn) (yaffs_Object *))
++int yaffs_ApplyToDirectoryChildren(yaffs_Object *theDir,
++					int (*fn) (yaffs_Object *))
+ {
+-	struct list_head *i;
++	struct ylist_head *i;
+ 	yaffs_Object *l;
+ 
+ 	if (!theDir) {
+@@ -6722,20 +6805,21 @@ int yaffs_ApplyToDirectoryChildren(yaffs
+ 		   ("tragedy: yaffs_FindObjectByName: null pointer directory"
+ 		    TENDSTR)));
+ 		YBUG();
++		return YAFFS_FAIL;
+ 	}
+ 	if (theDir->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 		T(YAFFS_TRACE_ALWAYS,
+ 		  (TSTR
+ 		   ("tragedy: yaffs_FindObjectByName: non-directory" TENDSTR)));
+ 		YBUG();
++		return YAFFS_FAIL;
+ 	}
+ 
+-	list_for_each(i, &theDir->variant.directoryVariant.children) {
++	ylist_for_each(i, &theDir->variant.directoryVariant.children) {
+ 		if (i) {
+-			l = list_entry(i, yaffs_Object, siblings);
+-			if (l && !fn(l)) {
++			l = ylist_entry(i, yaffs_Object, siblings);
++			if (l && !fn(l))
+ 				return YAFFS_FAIL;
+-			}
+ 		}
+ 	}
+ 
+@@ -6748,7 +6832,7 @@ int yaffs_ApplyToDirectoryChildren(yaffs
+  * actual object.
+  */
+ 
+-yaffs_Object *yaffs_GetEquivalentObject(yaffs_Object * obj)
++yaffs_Object *yaffs_GetEquivalentObject(yaffs_Object *obj)
+ {
+ 	if (obj && obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) {
+ 		/* We want the object id of the equivalent object, not this one */
+@@ -6756,10 +6840,9 @@ yaffs_Object *yaffs_GetEquivalentObject(
+ 		yaffs_CheckObjectDetailsLoaded(obj);
+ 	}
+ 	return obj;
+-
+ }
+ 
+-int yaffs_GetObjectName(yaffs_Object * obj, YCHAR * name, int buffSize)
++int yaffs_GetObjectName(yaffs_Object *obj, YCHAR *name, int buffSize)
+ {
+ 	memset(name, 0, buffSize * sizeof(YCHAR));
+ 
+@@ -6767,18 +6850,26 @@ int yaffs_GetObjectName(yaffs_Object * o
+ 
+ 	if (obj->objectId == YAFFS_OBJECTID_LOSTNFOUND) {
+ 		yaffs_strncpy(name, YAFFS_LOSTNFOUND_NAME, buffSize - 1);
+-	} else if (obj->chunkId <= 0) {
++	} else if (obj->hdrChunk <= 0) {
+ 		YCHAR locName[20];
++		YCHAR numString[20];
++		YCHAR *x = &numString[19];
++		unsigned v = obj->objectId;
++		numString[19] = 0;
++		while (v > 0) {
++			x--;
++			*x = '0' + (v % 10);
++			v /= 10;
++		}
+ 		/* make up a name */
+-		yaffs_sprintf(locName, _Y("%s%d"), YAFFS_LOSTNFOUND_PREFIX,
+-			      obj->objectId);
++		yaffs_strcpy(locName, YAFFS_LOSTNFOUND_PREFIX);
++		yaffs_strcat(locName, x);
+ 		yaffs_strncpy(name, locName, buffSize - 1);
+ 
+ 	}
+ #ifdef CONFIG_YAFFS_SHORT_NAMES_IN_RAM
+-	else if (obj->shortName[0]) {
++	else if (obj->shortName[0])
+ 		yaffs_strcpy(name, obj->shortName);
+-	}
+ #endif
+ 	else {
+ 		int result;
+@@ -6788,9 +6879,9 @@ int yaffs_GetObjectName(yaffs_Object * o
+ 
+ 		memset(buffer, 0, obj->myDev->nDataBytesPerChunk);
+ 
+-		if (obj->chunkId >= 0) {
++		if (obj->hdrChunk > 0) {
+ 			result = yaffs_ReadChunkWithTagsFromNAND(obj->myDev,
+-							obj->chunkId, buffer,
++							obj->hdrChunk, buffer,
+ 							NULL);
+ 		}
+ 		yaffs_strncpy(name, oh->name, buffSize - 1);
+@@ -6801,46 +6892,43 @@ int yaffs_GetObjectName(yaffs_Object * o
+ 	return yaffs_strlen(name);
+ }
+ 
+-int yaffs_GetObjectFileLength(yaffs_Object * obj)
++int yaffs_GetObjectFileLength(yaffs_Object *obj)
+ {
+-
+ 	/* Dereference any hard linking */
+ 	obj = yaffs_GetEquivalentObject(obj);
+ 
+-	if (obj->variantType == YAFFS_OBJECT_TYPE_FILE) {
++	if (obj->variantType == YAFFS_OBJECT_TYPE_FILE)
+ 		return obj->variant.fileVariant.fileSize;
+-	}
+-	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK) {
++	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK)
+ 		return yaffs_strlen(obj->variant.symLinkVariant.alias);
+-	} else {
++	else {
+ 		/* Only a directory should drop through to here */
+ 		return obj->myDev->nDataBytesPerChunk;
+ 	}
+ }
+ 
+-int yaffs_GetObjectLinkCount(yaffs_Object * obj)
++int yaffs_GetObjectLinkCount(yaffs_Object *obj)
+ {
+ 	int count = 0;
+-	struct list_head *i;
++	struct ylist_head *i;
+ 
+-	if (!obj->unlinked) {
+-		count++;	/* the object itself */
+-	}
+-	list_for_each(i, &obj->hardLinks) {
+-		count++;	/* add the hard links; */
+-	}
+-	return count;
++	if (!obj->unlinked)
++		count++;		/* the object itself */
++
++	ylist_for_each(i, &obj->hardLinks)
++		count++;		/* add the hard links; */
+ 
++	return count;
+ }
+ 
+-int yaffs_GetObjectInode(yaffs_Object * obj)
++int yaffs_GetObjectInode(yaffs_Object *obj)
+ {
+ 	obj = yaffs_GetEquivalentObject(obj);
+ 
+ 	return obj->objectId;
+ }
+ 
+-unsigned yaffs_GetObjectType(yaffs_Object * obj)
++unsigned yaffs_GetObjectType(yaffs_Object *obj)
+ {
+ 	obj = yaffs_GetEquivalentObject(obj);
+ 
+@@ -6872,19 +6960,18 @@ unsigned yaffs_GetObjectType(yaffs_Objec
+ 	}
+ }
+ 
+-YCHAR *yaffs_GetSymlinkAlias(yaffs_Object * obj)
++YCHAR *yaffs_GetSymlinkAlias(yaffs_Object *obj)
+ {
+ 	obj = yaffs_GetEquivalentObject(obj);
+-	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK) {
++	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK)
+ 		return yaffs_CloneString(obj->variant.symLinkVariant.alias);
+-	} else {
++	else
+ 		return yaffs_CloneString(_Y(""));
+-	}
+ }
+ 
+ #ifndef CONFIG_YAFFS_WINCE
+ 
+-int yaffs_SetAttributes(yaffs_Object * obj, struct iattr *attr)
++int yaffs_SetAttributes(yaffs_Object *obj, struct iattr *attr)
+ {
+ 	unsigned int valid = attr->ia_valid;
+ 
+@@ -6910,7 +6997,7 @@ int yaffs_SetAttributes(yaffs_Object * o
+ 	return YAFFS_OK;
+ 
+ }
+-int yaffs_GetAttributes(yaffs_Object * obj, struct iattr *attr)
++int yaffs_GetAttributes(yaffs_Object *obj, struct iattr *attr)
+ {
+ 	unsigned int valid = 0;
+ 
+@@ -6934,13 +7021,12 @@ int yaffs_GetAttributes(yaffs_Object * o
+ 	attr->ia_valid = valid;
+ 
+ 	return YAFFS_OK;
+-
+ }
+ 
+ #endif
+ 
+ #if 0
+-int yaffs_DumpObject(yaffs_Object * obj)
++int yaffs_DumpObject(yaffs_Object *obj)
+ {
+ 	YCHAR name[257];
+ 
+@@ -6951,7 +7037,7 @@ int yaffs_DumpObject(yaffs_Object * obj)
+ 	   ("Object %d, inode %d \"%s\"\n dirty %d valid %d serial %d sum %d"
+ 	    " chunk %d type %d size %d\n"
+ 	    TENDSTR), obj->objectId, yaffs_GetObjectInode(obj), name,
+-	   obj->dirty, obj->valid, obj->serial, obj->sum, obj->chunkId,
++	   obj->dirty, obj->valid, obj->serial, obj->sum, obj->hdrChunk,
+ 	   yaffs_GetObjectType(obj), yaffs_GetObjectFileLength(obj)));
+ 
+ 	return YAFFS_OK;
+@@ -6960,7 +7046,7 @@ int yaffs_DumpObject(yaffs_Object * obj)
+ 
+ /*---------------------------- Initialisation code -------------------------------------- */
+ 
+-static int yaffs_CheckDevFunctions(const yaffs_Device * dev)
++static int yaffs_CheckDevFunctions(const yaffs_Device *dev)
+ {
+ 
+ 	/* Common functions, gotta have */
+@@ -7011,7 +7097,7 @@ static int yaffs_CreateInitialDirectorie
+ 	    yaffs_CreateFakeDirectory(dev, YAFFS_OBJECTID_LOSTNFOUND,
+ 				      YAFFS_LOSTNFOUND_MODE | S_IFDIR);
+ 
+-	if(dev->lostNFoundDir && dev->rootDir && dev->unlinkedDir && dev->deletedDir){
++	if (dev->lostNFoundDir && dev->rootDir && dev->unlinkedDir && dev->deletedDir) {
+ 		yaffs_AddObjectToDirectory(dev->rootDir, dev->lostNFoundDir);
+ 		return YAFFS_OK;
+ 	}
+@@ -7019,7 +7105,7 @@ static int yaffs_CreateInitialDirectorie
+ 	return YAFFS_FAIL;
+ }
+ 
+-int yaffs_GutsInitialise(yaffs_Device * dev)
++int yaffs_GutsInitialise(yaffs_Device *dev)
+ {
+ 	int init_failed = 0;
+ 	unsigned x;
+@@ -7040,6 +7126,8 @@ int yaffs_GutsInitialise(yaffs_Device * 
+ 	dev->chunkOffset = 0;
+ 	dev->nFreeChunks = 0;
+ 
++	dev->gcBlock = -1;
++
+ 	if (dev->startBlock == 0) {
+ 		dev->internalStartBlock = dev->startBlock + 1;
+ 		dev->internalEndBlock = dev->endBlock + 1;
+@@ -7049,18 +7137,18 @@ int yaffs_GutsInitialise(yaffs_Device * 
+ 
+ 	/* Check geometry parameters. */
+ 
+-	if ((dev->isYaffs2 && dev->nDataBytesPerChunk < 1024) ||
+-	    (!dev->isYaffs2 && dev->nDataBytesPerChunk != 512) ||
++	if ((!dev->inbandTags && dev->isYaffs2 && dev->totalBytesPerChunk < 1024) ||
++	    (!dev->isYaffs2 && dev->totalBytesPerChunk < 512) ||
++	    (dev->inbandTags && !dev->isYaffs2) ||
+ 	     dev->nChunksPerBlock < 2 ||
+ 	     dev->nReservedBlocks < 2 ||
+ 	     dev->internalStartBlock <= 0 ||
+ 	     dev->internalEndBlock <= 0 ||
+-	     dev->internalEndBlock <= (dev->internalStartBlock + dev->nReservedBlocks + 2)	// otherwise it is too small
+-	    ) {
++	     dev->internalEndBlock <= (dev->internalStartBlock + dev->nReservedBlocks + 2)) {	/* otherwise it is too small */
+ 		T(YAFFS_TRACE_ALWAYS,
+ 		  (TSTR
+-		   ("yaffs: NAND geometry problems: chunk size %d, type is yaffs%s "
+-		    TENDSTR), dev->nDataBytesPerChunk, dev->isYaffs2 ? "2" : ""));
++		   ("yaffs: NAND geometry problems: chunk size %d, type is yaffs%s, inbandTags %d "
++		    TENDSTR), dev->totalBytesPerChunk, dev->isYaffs2 ? "2" : "", dev->inbandTags));
+ 		return YAFFS_FAIL;
+ 	}
+ 
+@@ -7070,6 +7158,12 @@ int yaffs_GutsInitialise(yaffs_Device * 
+ 		return YAFFS_FAIL;
+ 	}
+ 
++	/* Sort out space for inband tags, if required */
++	if (dev->inbandTags)
++		dev->nDataBytesPerChunk = dev->totalBytesPerChunk - sizeof(yaffs_PackedTags2TagsPart);
++	else
++		dev->nDataBytesPerChunk = dev->totalBytesPerChunk;
++
+ 	/* Got the right mix of functions? */
+ 	if (!yaffs_CheckDevFunctions(dev)) {
+ 		/* Function missing */
+@@ -7097,31 +7191,18 @@ int yaffs_GutsInitialise(yaffs_Device * 
+ 
+ 	dev->isMounted = 1;
+ 
+-
+-
+ 	/* OK now calculate a few things for the device */
+ 
+ 	/*
+ 	 *  Calculate all the chunk size manipulation numbers:
+ 	 */
+-	 /* Start off assuming it is a power of 2 */
+-	 dev->chunkShift = ShiftDiv(dev->nDataBytesPerChunk);
+-	 dev->chunkMask = (1<<dev->chunkShift) - 1;
+-
+-	 if(dev->nDataBytesPerChunk == (dev->chunkMask + 1)){
+-	 	/* Yes it is a power of 2, disable crumbs */
+-		dev->crumbMask = 0;
+-		dev->crumbShift = 0;
+-		dev->crumbsPerChunk = 0;
+-	 } else {
+-	 	/* Not a power of 2, use crumbs instead */
+-		dev->crumbShift = ShiftDiv(sizeof(yaffs_PackedTags2TagsPart));
+-		dev->crumbMask = (1<<dev->crumbShift)-1;
+-		dev->crumbsPerChunk = dev->nDataBytesPerChunk/(1 << dev->crumbShift);
+-		dev->chunkShift = 0;
+-		dev->chunkMask = 0;
+-	}
+-
++	x = dev->nDataBytesPerChunk;
++	/* We always use dev->chunkShift and dev->chunkDiv */
++	dev->chunkShift = Shifts(x);
++	x >>= dev->chunkShift;
++	dev->chunkDiv = x;
++	/* We only use chunk mask if chunkDiv is 1 */
++	dev->chunkMask = (1<<dev->chunkShift) - 1;
+ 
+ 	/*
+ 	 * Calculate chunkGroupBits.
+@@ -7133,16 +7214,15 @@ int yaffs_GutsInitialise(yaffs_Device * 
+ 	bits = ShiftsGE(x);
+ 
+ 	/* Set up tnode width if wide tnodes are enabled. */
+-	if(!dev->wideTnodesDisabled){
++	if (!dev->wideTnodesDisabled) {
+ 		/* bits must be even so that we end up with 32-bit words */
+-		if(bits & 1)
++		if (bits & 1)
+ 			bits++;
+-		if(bits < 16)
++		if (bits < 16)
+ 			dev->tnodeWidth = 16;
+ 		else
+ 			dev->tnodeWidth = bits;
+-	}
+-	else
++	} else
+ 		dev->tnodeWidth = 16;
+ 
+ 	dev->tnodeMask = (1<<dev->tnodeWidth)-1;
+@@ -7193,7 +7273,7 @@ int yaffs_GutsInitialise(yaffs_Device * 
+ 	dev->hasPendingPrioritisedGCs = 1; /* Assume the worst for now, will get fixed on first GC */
+ 
+ 	/* Initialise temporary buffers and caches. */
+-	if(!yaffs_InitialiseTempBuffers(dev))
++	if (!yaffs_InitialiseTempBuffers(dev))
+ 		init_failed = 1;
+ 
+ 	dev->srCache = NULL;
+@@ -7203,25 +7283,26 @@ int yaffs_GutsInitialise(yaffs_Device * 
+ 	if (!init_failed &&
+ 	    dev->nShortOpCaches > 0) {
+ 		int i;
+-		__u8 *buf;
++		void *buf;
+ 		int srCacheBytes = dev->nShortOpCaches * sizeof(yaffs_ChunkCache);
+ 
+-		if (dev->nShortOpCaches > YAFFS_MAX_SHORT_OP_CACHES) {
++		if (dev->nShortOpCaches > YAFFS_MAX_SHORT_OP_CACHES)
+ 			dev->nShortOpCaches = YAFFS_MAX_SHORT_OP_CACHES;
+-		}
+ 
+-		buf = dev->srCache =  YMALLOC(srCacheBytes);
++		dev->srCache =  YMALLOC(srCacheBytes);
+ 
+-		if(dev->srCache)
+-			memset(dev->srCache,0,srCacheBytes);
++		buf = (__u8 *) dev->srCache;
++
++		if (dev->srCache)
++			memset(dev->srCache, 0, srCacheBytes);
+ 
+ 		for (i = 0; i < dev->nShortOpCaches && buf; i++) {
+ 			dev->srCache[i].object = NULL;
+ 			dev->srCache[i].lastUse = 0;
+ 			dev->srCache[i].dirty = 0;
+-			dev->srCache[i].data = buf = YMALLOC_DMA(dev->nDataBytesPerChunk);
++			dev->srCache[i].data = buf = YMALLOC_DMA(dev->totalBytesPerChunk);
+ 		}
+-		if(!buf)
++		if (!buf)
+ 			init_failed = 1;
+ 
+ 		dev->srLastUse = 0;
+@@ -7229,29 +7310,30 @@ int yaffs_GutsInitialise(yaffs_Device * 
+ 
+ 	dev->cacheHits = 0;
+ 
+-	if(!init_failed){
++	if (!init_failed) {
+ 		dev->gcCleanupList = YMALLOC(dev->nChunksPerBlock * sizeof(__u32));
+-		if(!dev->gcCleanupList)
++		if (!dev->gcCleanupList)
+ 			init_failed = 1;
+ 	}
+ 
+-	if (dev->isYaffs2) {
++	if (dev->isYaffs2)
+ 		dev->useHeaderFileSize = 1;
+-	}
+-	if(!init_failed && !yaffs_InitialiseBlocks(dev))
++
++	if (!init_failed && !yaffs_InitialiseBlocks(dev))
+ 		init_failed = 1;
+ 
+ 	yaffs_InitialiseTnodes(dev);
+ 	yaffs_InitialiseObjects(dev);
+ 
+-	if(!init_failed && !yaffs_CreateInitialDirectories(dev))
++	if (!init_failed && !yaffs_CreateInitialDirectories(dev))
+ 		init_failed = 1;
+ 
+ 
+-	if(!init_failed){
++	if (!init_failed) {
+ 		/* Now scan the flash. */
+ 		if (dev->isYaffs2) {
+-			if(yaffs_CheckpointRestore(dev)) {
++			if (yaffs_CheckpointRestore(dev)) {
++				yaffs_CheckObjectDetailsLoaded(dev->rootDir);
+ 				T(YAFFS_TRACE_ALWAYS,
+ 				  (TSTR("yaffs: restored from checkpoint" TENDSTR)));
+ 			} else {
+@@ -7273,24 +7355,25 @@ int yaffs_GutsInitialise(yaffs_Device * 
+ 				dev->nBackgroundDeletions = 0;
+ 				dev->oldestDirtySequence = 0;
+ 
+-				if(!init_failed && !yaffs_InitialiseBlocks(dev))
++				if (!init_failed && !yaffs_InitialiseBlocks(dev))
+ 					init_failed = 1;
+ 
+ 				yaffs_InitialiseTnodes(dev);
+ 				yaffs_InitialiseObjects(dev);
+ 
+-				if(!init_failed && !yaffs_CreateInitialDirectories(dev))
++				if (!init_failed && !yaffs_CreateInitialDirectories(dev))
+ 					init_failed = 1;
+ 
+-				if(!init_failed && !yaffs_ScanBackwards(dev))
++				if (!init_failed && !yaffs_ScanBackwards(dev))
+ 					init_failed = 1;
+ 			}
+-		}else
+-			if(!yaffs_Scan(dev))
++		} else if (!yaffs_Scan(dev))
+ 				init_failed = 1;
++
++		yaffs_StripDeletedObjects(dev);
+ 	}
+ 
+-	if(init_failed){
++	if (init_failed) {
+ 		/* Clean up the mess */
+ 		T(YAFFS_TRACE_TRACING,
+ 		  (TSTR("yaffs: yaffs_GutsInitialise() aborted.\n" TENDSTR)));
+@@ -7318,7 +7401,7 @@ int yaffs_GutsInitialise(yaffs_Device * 
+ 
+ }
+ 
+-void yaffs_Deinitialise(yaffs_Device * dev)
++void yaffs_Deinitialise(yaffs_Device *dev)
+ {
+ 	if (dev->isMounted) {
+ 		int i;
+@@ -7330,7 +7413,7 @@ void yaffs_Deinitialise(yaffs_Device * d
+ 		    dev->srCache) {
+ 
+ 			for (i = 0; i < dev->nShortOpCaches; i++) {
+-				if(dev->srCache[i].data)
++				if (dev->srCache[i].data)
+ 					YFREE(dev->srCache[i].data);
+ 				dev->srCache[i].data = NULL;
+ 			}
+@@ -7341,16 +7424,17 @@ void yaffs_Deinitialise(yaffs_Device * d
+ 
+ 		YFREE(dev->gcCleanupList);
+ 
+-		for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
++		for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++)
+ 			YFREE(dev->tempBuffer[i].buffer);
+-		}
+ 
+ 		dev->isMounted = 0;
+-	}
+ 
++		if (dev->deinitialiseNAND)
++			dev->deinitialiseNAND(dev);
++	}
+ }
+ 
+-static int yaffs_CountFreeChunks(yaffs_Device * dev)
++static int yaffs_CountFreeChunks(yaffs_Device *dev)
+ {
+ 	int nFree;
+ 	int b;
+@@ -7358,7 +7442,7 @@ static int yaffs_CountFreeChunks(yaffs_D
+ 	yaffs_BlockInfo *blk;
+ 
+ 	for (nFree = 0, b = dev->internalStartBlock; b <= dev->internalEndBlock;
+-	     b++) {
++			b++) {
+ 		blk = yaffs_GetBlockInfo(dev, b);
+ 
+ 		switch (blk->blockState) {
+@@ -7373,19 +7457,19 @@ static int yaffs_CountFreeChunks(yaffs_D
+ 		default:
+ 			break;
+ 		}
+-
+ 	}
+ 
+ 	return nFree;
+ }
+ 
+-int yaffs_GetNumberOfFreeChunks(yaffs_Device * dev)
++int yaffs_GetNumberOfFreeChunks(yaffs_Device *dev)
+ {
+ 	/* This is what we report to the outside world */
+ 
+ 	int nFree;
+ 	int nDirtyCacheChunks;
+ 	int blocksForCheckpoint;
++	int i;
+ 
+ #if 1
+ 	nFree = dev->nFreeChunks;
+@@ -7397,12 +7481,9 @@ int yaffs_GetNumberOfFreeChunks(yaffs_De
+ 
+ 	/* Now count the number of dirty chunks in the cache and subtract those */
+ 
+-	{
+-		int i;
+-		for (nDirtyCacheChunks = 0, i = 0; i < dev->nShortOpCaches; i++) {
+-			if (dev->srCache[i].dirty)
+-				nDirtyCacheChunks++;
+-		}
++	for (nDirtyCacheChunks = 0, i = 0; i < dev->nShortOpCaches; i++) {
++		if (dev->srCache[i].dirty)
++			nDirtyCacheChunks++;
+ 	}
+ 
+ 	nFree -= nDirtyCacheChunks;
+@@ -7410,8 +7491,8 @@ int yaffs_GetNumberOfFreeChunks(yaffs_De
+ 	nFree -= ((dev->nReservedBlocks + 1) * dev->nChunksPerBlock);
+ 
+ 	/* Now we figure out how much to reserve for the checkpoint and report that... */
+-	blocksForCheckpoint = dev->nCheckpointReservedBlocks - dev->blocksInCheckpoint;
+-	if(blocksForCheckpoint < 0)
++	blocksForCheckpoint = yaffs_CalcCheckpointBlocksRequired(dev) - dev->blocksInCheckpoint;
++	if (blocksForCheckpoint < 0)
+ 		blocksForCheckpoint = 0;
+ 
+ 	nFree -= (blocksForCheckpoint * dev->nChunksPerBlock);
+@@ -7425,12 +7506,12 @@ int yaffs_GetNumberOfFreeChunks(yaffs_De
+ 
+ static int yaffs_freeVerificationFailures;
+ 
+-static void yaffs_VerifyFreeChunks(yaffs_Device * dev)
++static void yaffs_VerifyFreeChunks(yaffs_Device *dev)
+ {
+ 	int counted;
+ 	int difference;
+ 
+-	if(yaffs_SkipVerification(dev))
++	if (yaffs_SkipVerification(dev))
+ 		return;
+ 
+ 	counted = yaffs_CountFreeChunks(dev);
+@@ -7447,23 +7528,25 @@ static void yaffs_VerifyFreeChunks(yaffs
+ 
+ /*---------------------------------------- YAFFS test code ----------------------*/
+ 
+-#define yaffs_CheckStruct(structure,syze, name) \
+-           if(sizeof(structure) != syze) \
+-	       { \
+-	         T(YAFFS_TRACE_ALWAYS,(TSTR("%s should be %d but is %d\n" TENDSTR),\
+-		 name,syze,sizeof(structure))); \
+-	         return YAFFS_FAIL; \
+-		}
++#define yaffs_CheckStruct(structure, syze, name) \
++	do { \
++		if (sizeof(structure) != syze) { \
++			T(YAFFS_TRACE_ALWAYS, (TSTR("%s should be %d but is %d\n" TENDSTR),\
++				name, syze, sizeof(structure))); \
++			return YAFFS_FAIL; \
++		} \
++	} while (0)
+ 
+ static int yaffs_CheckStructures(void)
+ {
+-/*      yaffs_CheckStruct(yaffs_Tags,8,"yaffs_Tags") */
+-/*      yaffs_CheckStruct(yaffs_TagsUnion,8,"yaffs_TagsUnion") */
+-/*      yaffs_CheckStruct(yaffs_Spare,16,"yaffs_Spare") */
++/*      yaffs_CheckStruct(yaffs_Tags,8,"yaffs_Tags"); */
++/*      yaffs_CheckStruct(yaffs_TagsUnion,8,"yaffs_TagsUnion"); */
++/*      yaffs_CheckStruct(yaffs_Spare,16,"yaffs_Spare"); */
+ #ifndef CONFIG_YAFFS_TNODE_LIST_DEBUG
+-	yaffs_CheckStruct(yaffs_Tnode, 2 * YAFFS_NTNODES_LEVEL0, "yaffs_Tnode")
++	yaffs_CheckStruct(yaffs_Tnode, 2 * YAFFS_NTNODES_LEVEL0, "yaffs_Tnode");
+ #endif
+-	    yaffs_CheckStruct(yaffs_ObjectHeader, 512, "yaffs_ObjectHeader")
+-
+-	    return YAFFS_OK;
++#ifndef CONFIG_YAFFS_WINCE
++	yaffs_CheckStruct(yaffs_ObjectHeader, 512, "yaffs_ObjectHeader");
++#endif
++	return YAFFS_OK;
+ }
+--- a/fs/yaffs2/yaffs_guts.h
++++ b/fs/yaffs2/yaffs_guts.h
+@@ -90,7 +90,7 @@
+ 
+ #define YAFFS_MAX_SHORT_OP_CACHES	20
+ 
+-#define YAFFS_N_TEMP_BUFFERS		4
++#define YAFFS_N_TEMP_BUFFERS		6
+ 
+ /* We limit the number attempts at sucessfully saving a chunk of data.
+  * Small-page devices have 32 pages per block; large-page devices have 64.
+@@ -108,6 +108,9 @@
+ #define YAFFS_LOWEST_SEQUENCE_NUMBER	0x00001000
+ #define YAFFS_HIGHEST_SEQUENCE_NUMBER	0xEFFFFF00
+ 
++/* Special sequence number for bad block that failed to be marked bad */
++#define YAFFS_SEQUENCE_BAD_BLOCK	0xFFFF0000
++
+ /* ChunkCache is used for short read/write operations.*/
+ typedef struct {
+ 	struct yaffs_ObjectStruct *object;
+@@ -134,11 +137,10 @@ typedef struct {
+ typedef struct {
+ 	unsigned chunkId:20;
+ 	unsigned serialNumber:2;
+-	unsigned byteCount:10;
++	unsigned byteCountLSB:10;
+ 	unsigned objectId:18;
+ 	unsigned ecc:12;
+-	unsigned unusedStuff:2;
+-
++	unsigned byteCountMSB:2;
+ } yaffs_Tags;
+ 
+ typedef union {
+@@ -277,13 +279,13 @@ typedef struct {
+ 
+ 	int softDeletions:10;	/* number of soft deleted pages */
+ 	int pagesInUse:10;	/* number of pages in use */
+-	yaffs_BlockState blockState:4;	/* One of the above block states */
++	unsigned blockState:4;	/* One of the above block states. NB use unsigned because enum is sometimes an int */
+ 	__u32 needsRetiring:1;	/* Data has failed on this block, need to get valid data off */
+-                        	/* and retire the block. */
+-	__u32 skipErasedCheck: 1; /* If this is set we can skip the erased check on this block */
+-	__u32 gcPrioritise: 1; 	/* An ECC check or blank check has failed on this block.
++				/* and retire the block. */
++	__u32 skipErasedCheck:1; /* If this is set we can skip the erased check on this block */
++	__u32 gcPrioritise:1; 	/* An ECC check or blank check has failed on this block.
+ 				   It should be prioritised for GC */
+-        __u32 chunkErrorStrikes:3; /* How many times we've had ecc etc failures on this block and tried to reuse it */
++	__u32 chunkErrorStrikes:3; /* How many times we've had ecc etc failures on this block and tried to reuse it */
+ 
+ #ifdef CONFIG_YAFFS_YAFFS2
+ 	__u32 hasShrinkHeader:1; /* This block has at least one shrink object header */
+@@ -300,11 +302,11 @@ typedef struct {
+ 
+ 	/* Apply to everything  */
+ 	int parentObjectId;
+-	__u16 sum__NoLongerUsed;	/* checksum of name. No longer used */
++	__u16 sum__NoLongerUsed;        /* checksum of name. No longer used */
+ 	YCHAR name[YAFFS_MAX_NAME_LENGTH + 1];
+ 
+-	/* Thes following apply to directories, files, symlinks - not hard links */
+-	__u32 yst_mode;		/* protection */
++	/* The following apply to directories, files, symlinks - not hard links */
++	__u32 yst_mode;         /* protection */
+ 
+ #ifdef CONFIG_YAFFS_WINCE
+ 	__u32 notForWinCE[5];
+@@ -331,11 +333,14 @@ typedef struct {
+ 	__u32 win_ctime[2];
+ 	__u32 win_atime[2];
+ 	__u32 win_mtime[2];
+-	__u32 roomToGrow[4];
+ #else
+-	__u32 roomToGrow[10];
++	__u32 roomToGrow[6];
++
+ #endif
++	__u32 inbandShadowsObject;
++	__u32 inbandIsShrink;
+ 
++	__u32 reservedSpace[2];
+ 	int shadowsObject;	/* This object header shadows the specified object if > 0 */
+ 
+ 	/* isShrink applies to object headers written when we shrink the file (ie resize) */
+@@ -381,7 +386,7 @@ typedef struct {
+ } yaffs_FileStructure;
+ 
+ typedef struct {
+-	struct list_head children;	/* list of child links */
++	struct ylist_head children;     /* list of child links */
+ } yaffs_DirectoryStructure;
+ 
+ typedef struct {
+@@ -418,23 +423,24 @@ struct yaffs_ObjectStruct {
+ 				 * still in the inode cache. Free of object is defered.
+ 				 * until the inode is released.
+ 				 */
++	__u8 beingCreated:1;	/* This object is still being created so skip some checks. */
+ 
+ 	__u8 serial;		/* serial number of chunk in NAND. Cached here */
+ 	__u16 sum;		/* sum of the name to speed searching */
+ 
+-	struct yaffs_DeviceStruct *myDev;	/* The device I'm on */
++	struct yaffs_DeviceStruct *myDev;       /* The device I'm on */
+ 
+-	struct list_head hashLink;	/* list of objects in this hash bucket */
++	struct ylist_head hashLink;     /* list of objects in this hash bucket */
+ 
+-	struct list_head hardLinks;	/* all the equivalent hard linked objects */
++	struct ylist_head hardLinks;    /* all the equivalent hard linked objects */
+ 
+ 	/* directory structure stuff */
+ 	/* also used for linking up the free list */
+ 	struct yaffs_ObjectStruct *parent;
+-	struct list_head siblings;
++	struct ylist_head siblings;
+ 
+ 	/* Where's my object header in NAND? */
+-	int chunkId;
++	int hdrChunk;
+ 
+ 	int nDataChunks;	/* Number of data chunks attached to the file. */
+ 
+@@ -485,7 +491,7 @@ struct yaffs_ObjectList_struct {
+ typedef struct yaffs_ObjectList_struct yaffs_ObjectList;
+ 
+ typedef struct {
+-	struct list_head list;
++	struct ylist_head list;
+ 	int count;
+ } yaffs_ObjectBucket;
+ 
+@@ -495,11 +501,10 @@ typedef struct {
+  */
+ 
+ typedef struct {
+-        int structType;
++	int structType;
+ 	__u32 objectId;
+ 	__u32 parentId;
+-	int chunkId;
+-
++	int hdrChunk;
+ 	yaffs_ObjectType variantType:3;
+ 	__u8 deleted:1;
+ 	__u8 softDeleted:1;
+@@ -511,8 +516,7 @@ typedef struct {
+ 
+ 	int nDataChunks;
+ 	__u32 fileSizeOrEquivalentObjectId;
+-
+-}yaffs_CheckpointObject;
++} yaffs_CheckpointObject;
+ 
+ /*--------------------- Temporary buffers ----------------
+  *
+@@ -528,13 +532,13 @@ typedef struct {
+ /*----------------- Device ---------------------------------*/
+ 
+ struct yaffs_DeviceStruct {
+-	struct list_head devList;
++	struct ylist_head devList;
+ 	const char *name;
+ 
+ 	/* Entry parameters set up way early. Yaffs sets up the rest.*/
+ 	int nDataBytesPerChunk;	/* Should be a power of 2 >= 512 */
+ 	int nChunksPerBlock;	/* does not need to be a power of 2 */
+-	int nBytesPerSpare;	/* spare area size */
++	int spareBytesPerChunk;	/* spare area size */
+ 	int startBlock;		/* Start block we're allowed to use */
+ 	int endBlock;		/* End block we're allowed to use */
+ 	int nReservedBlocks;	/* We want this tuneable so that we can reduce */
+@@ -544,9 +548,7 @@ struct yaffs_DeviceStruct {
+ 	/* Stuff used by the shared space checkpointing mechanism */
+ 	/* If this value is zero, then this mechanism is disabled */
+ 
+-	int nCheckpointReservedBlocks; /* Blocks to reserve for checkpoint data */
+-
+-
++/*	int nCheckpointReservedBlocks; */ /* Blocks to reserve for checkpoint data */
+ 
+ 
+ 	int nShortOpCaches;	/* If <= 0, then short op caching is disabled, else
+@@ -560,30 +562,31 @@ struct yaffs_DeviceStruct {
+ 	void *genericDevice;	/* Pointer to device context
+ 				 * On an mtd this holds the mtd pointer.
+ 				 */
+-        void *superBlock;
++	void *superBlock;
+ 
+ 	/* NAND access functions (Must be set before calling YAFFS)*/
+ 
+-	int (*writeChunkToNAND) (struct yaffs_DeviceStruct * dev,
+-				 int chunkInNAND, const __u8 * data,
+-				 const yaffs_Spare * spare);
+-	int (*readChunkFromNAND) (struct yaffs_DeviceStruct * dev,
+-				  int chunkInNAND, __u8 * data,
+-				  yaffs_Spare * spare);
+-	int (*eraseBlockInNAND) (struct yaffs_DeviceStruct * dev,
+-				 int blockInNAND);
+-	int (*initialiseNAND) (struct yaffs_DeviceStruct * dev);
++	int (*writeChunkToNAND) (struct yaffs_DeviceStruct *dev,
++					int chunkInNAND, const __u8 *data,
++					const yaffs_Spare *spare);
++	int (*readChunkFromNAND) (struct yaffs_DeviceStruct *dev,
++					int chunkInNAND, __u8 *data,
++					yaffs_Spare *spare);
++	int (*eraseBlockInNAND) (struct yaffs_DeviceStruct *dev,
++					int blockInNAND);
++	int (*initialiseNAND) (struct yaffs_DeviceStruct *dev);
++	int (*deinitialiseNAND) (struct yaffs_DeviceStruct *dev);
+ 
+ #ifdef CONFIG_YAFFS_YAFFS2
+-	int (*writeChunkWithTagsToNAND) (struct yaffs_DeviceStruct * dev,
+-					 int chunkInNAND, const __u8 * data,
+-					 const yaffs_ExtendedTags * tags);
+-	int (*readChunkWithTagsFromNAND) (struct yaffs_DeviceStruct * dev,
+-					  int chunkInNAND, __u8 * data,
+-					  yaffs_ExtendedTags * tags);
+-	int (*markNANDBlockBad) (struct yaffs_DeviceStruct * dev, int blockNo);
+-	int (*queryNANDBlock) (struct yaffs_DeviceStruct * dev, int blockNo,
+-			       yaffs_BlockState * state, int *sequenceNumber);
++	int (*writeChunkWithTagsToNAND) (struct yaffs_DeviceStruct *dev,
++					 int chunkInNAND, const __u8 *data,
++					 const yaffs_ExtendedTags *tags);
++	int (*readChunkWithTagsFromNAND) (struct yaffs_DeviceStruct *dev,
++					  int chunkInNAND, __u8 *data,
++					  yaffs_ExtendedTags *tags);
++	int (*markNANDBlockBad) (struct yaffs_DeviceStruct *dev, int blockNo);
++	int (*queryNANDBlock) (struct yaffs_DeviceStruct *dev, int blockNo,
++			       yaffs_BlockState *state, __u32 *sequenceNumber);
+ #endif
+ 
+ 	int isYaffs2;
+@@ -595,10 +598,12 @@ struct yaffs_DeviceStruct {
+ 	void (*removeObjectCallback)(struct yaffs_ObjectStruct *obj);
+ 
+ 	/* Callback to mark the superblock dirsty */
+-	void (*markSuperBlockDirty)(void * superblock);
++	void (*markSuperBlockDirty)(void *superblock);
+ 
+ 	int wideTnodesDisabled; /* Set to disable wide tnodes */
+ 
++	YCHAR *pathDividers;	/* String of legal path dividers */
++
+ 
+ 	/* End of stuff that must be set before initialisation. */
+ 
+@@ -615,16 +620,14 @@ struct yaffs_DeviceStruct {
+ 	__u32 tnodeWidth;
+ 	__u32 tnodeMask;
+ 
+-	/* Stuff to support various file offses to chunk/offset translations */
+-	/* "Crumbs" for nDataBytesPerChunk not being a power of 2 */
+-	__u32 crumbMask;
+-	__u32 crumbShift;
+-	__u32 crumbsPerChunk;
+-
+-	/* Straight shifting for nDataBytesPerChunk being a power of 2 */
+-	__u32 chunkShift;
+-	__u32 chunkMask;
+-
++	/* Stuff for figuring out file offset to chunk conversions */
++	__u32 chunkShift; /* Shift value */
++	__u32 chunkDiv;   /* Divisor after shifting: 1 for power-of-2 sizes */
++	__u32 chunkMask;  /* Mask to use for power-of-2 case */
++
++	/* Stuff to handle inband tags */
++	int inbandTags;
++	__u32 totalBytesPerChunk;
+ 
+ #ifdef __KERNEL__
+ 
+@@ -633,7 +636,7 @@ struct yaffs_DeviceStruct {
+ 	__u8 *spareBuffer;	/* For mtdif2 use. Don't know the size of the buffer
+ 				 * at compile time so we have to allocate it.
+ 				 */
+-	void (*putSuperFunc) (struct super_block * sb);
++	void (*putSuperFunc) (struct super_block *sb);
+ #endif
+ 
+ 	int isMounted;
+@@ -663,6 +666,8 @@ struct yaffs_DeviceStruct {
+ 	__u32 checkpointSum;
+ 	__u32 checkpointXor;
+ 
++	int nCheckpointBlocksRequired; /* Number of blocks needed to store current checkpoint set */
++
+ 	/* Block Info */
+ 	yaffs_BlockInfo *blockInfo;
+ 	__u8 *chunkBits;	/* bitmap of chunks in use */
+@@ -684,11 +689,15 @@ struct yaffs_DeviceStruct {
+ 	yaffs_TnodeList *allocatedTnodeList;
+ 
+ 	int isDoingGC;
++	int gcBlock;
++	int gcChunk;
+ 
+ 	int nObjectsCreated;
+ 	yaffs_Object *freeObjects;
+ 	int nFreeObjects;
+ 
++	int nHardLinks;
++
+ 	yaffs_ObjectList *allocatedObjectList;
+ 
+ 	yaffs_ObjectBucket objectBucket[YAFFS_NOBJECT_BUCKETS];
+@@ -745,8 +754,10 @@ struct yaffs_DeviceStruct {
+ 	int nBackgroundDeletions;	/* Count of background deletions. */
+ 
+ 
++	/* Temporary buffer management */
+ 	yaffs_TempBuffer tempBuffer[YAFFS_N_TEMP_BUFFERS];
+ 	int maxTemp;
++	int tempInUse;
+ 	int unmanagedTempAllocations;
+ 	int unmanagedTempDeallocations;
+ 
+@@ -758,9 +769,9 @@ struct yaffs_DeviceStruct {
+ 
+ typedef struct yaffs_DeviceStruct yaffs_Device;
+ 
+-/* The static layout of bllock usage etc is stored in the super block header */
++/* The static layout of block usage etc is stored in the super block header */
+ typedef struct {
+-        int StructType;
++	int StructType;
+ 	int version;
+ 	int checkpointStartBlock;
+ 	int checkpointEndBlock;
+@@ -773,7 +784,7 @@ typedef struct {
+  * must be preserved over unmount/mount cycles.
+  */
+ typedef struct {
+-        int structType;
++	int structType;
+ 	int nErasedBlocks;
+ 	int allocationBlock;	/* Current block being allocated off */
+ 	__u32 allocationPage;
+@@ -791,57 +802,45 @@ typedef struct {
+ 
+ 
+ typedef struct {
+-    int structType;
+-    __u32 magic;
+-    __u32 version;
+-    __u32 head;
++	int structType;
++	__u32 magic;
++	__u32 version;
++	__u32 head;
+ } yaffs_CheckpointValidity;
+ 
+-/* Function to manipulate block info */
+-static Y_INLINE yaffs_BlockInfo *yaffs_GetBlockInfo(yaffs_Device * dev, int blk)
+-{
+-	if (blk < dev->internalStartBlock || blk > dev->internalEndBlock) {
+-		T(YAFFS_TRACE_ERROR,
+-		  (TSTR
+-		   ("**>> yaffs: getBlockInfo block %d is not valid" TENDSTR),
+-		   blk));
+-		YBUG();
+-	}
+-	return &dev->blockInfo[blk - dev->internalStartBlock];
+-}
+ 
+ /*----------------------- YAFFS Functions -----------------------*/
+ 
+-int yaffs_GutsInitialise(yaffs_Device * dev);
+-void yaffs_Deinitialise(yaffs_Device * dev);
++int yaffs_GutsInitialise(yaffs_Device *dev);
++void yaffs_Deinitialise(yaffs_Device *dev);
+ 
+-int yaffs_GetNumberOfFreeChunks(yaffs_Device * dev);
++int yaffs_GetNumberOfFreeChunks(yaffs_Device *dev);
+ 
+-int yaffs_RenameObject(yaffs_Object * oldDir, const YCHAR * oldName,
+-		       yaffs_Object * newDir, const YCHAR * newName);
++int yaffs_RenameObject(yaffs_Object *oldDir, const YCHAR *oldName,
++		       yaffs_Object *newDir, const YCHAR *newName);
+ 
+-int yaffs_Unlink(yaffs_Object * dir, const YCHAR * name);
+-int yaffs_DeleteFile(yaffs_Object * obj);
++int yaffs_Unlink(yaffs_Object *dir, const YCHAR *name);
++int yaffs_DeleteObject(yaffs_Object *obj);
+ 
+-int yaffs_GetObjectName(yaffs_Object * obj, YCHAR * name, int buffSize);
+-int yaffs_GetObjectFileLength(yaffs_Object * obj);
+-int yaffs_GetObjectInode(yaffs_Object * obj);
+-unsigned yaffs_GetObjectType(yaffs_Object * obj);
+-int yaffs_GetObjectLinkCount(yaffs_Object * obj);
++int yaffs_GetObjectName(yaffs_Object *obj, YCHAR *name, int buffSize);
++int yaffs_GetObjectFileLength(yaffs_Object *obj);
++int yaffs_GetObjectInode(yaffs_Object *obj);
++unsigned yaffs_GetObjectType(yaffs_Object *obj);
++int yaffs_GetObjectLinkCount(yaffs_Object *obj);
+ 
+-int yaffs_SetAttributes(yaffs_Object * obj, struct iattr *attr);
+-int yaffs_GetAttributes(yaffs_Object * obj, struct iattr *attr);
++int yaffs_SetAttributes(yaffs_Object *obj, struct iattr *attr);
++int yaffs_GetAttributes(yaffs_Object *obj, struct iattr *attr);
+ 
+ /* File operations */
+-int yaffs_ReadDataFromFile(yaffs_Object * obj, __u8 * buffer, loff_t offset,
+-			   int nBytes);
+-int yaffs_WriteDataToFile(yaffs_Object * obj, const __u8 * buffer, loff_t offset,
+-			  int nBytes, int writeThrough);
+-int yaffs_ResizeFile(yaffs_Object * obj, loff_t newSize);
+-
+-yaffs_Object *yaffs_MknodFile(yaffs_Object * parent, const YCHAR * name,
+-			      __u32 mode, __u32 uid, __u32 gid);
+-int yaffs_FlushFile(yaffs_Object * obj, int updateTime);
++int yaffs_ReadDataFromFile(yaffs_Object *obj, __u8 *buffer, loff_t offset,
++				int nBytes);
++int yaffs_WriteDataToFile(yaffs_Object *obj, const __u8 *buffer, loff_t offset,
++				int nBytes, int writeThrough);
++int yaffs_ResizeFile(yaffs_Object *obj, loff_t newSize);
++
++yaffs_Object *yaffs_MknodFile(yaffs_Object *parent, const YCHAR *name,
++				__u32 mode, __u32 uid, __u32 gid);
++int yaffs_FlushFile(yaffs_Object *obj, int updateTime);
+ 
+ /* Flushing and checkpointing */
+ void yaffs_FlushEntireDeviceCache(yaffs_Device *dev);
+@@ -850,33 +849,33 @@ int yaffs_CheckpointSave(yaffs_Device *d
+ int yaffs_CheckpointRestore(yaffs_Device *dev);
+ 
+ /* Directory operations */
+-yaffs_Object *yaffs_MknodDirectory(yaffs_Object * parent, const YCHAR * name,
+-				   __u32 mode, __u32 uid, __u32 gid);
+-yaffs_Object *yaffs_FindObjectByName(yaffs_Object * theDir, const YCHAR * name);
+-int yaffs_ApplyToDirectoryChildren(yaffs_Object * theDir,
++yaffs_Object *yaffs_MknodDirectory(yaffs_Object *parent, const YCHAR *name,
++				__u32 mode, __u32 uid, __u32 gid);
++yaffs_Object *yaffs_FindObjectByName(yaffs_Object *theDir, const YCHAR *name);
++int yaffs_ApplyToDirectoryChildren(yaffs_Object *theDir,
+ 				   int (*fn) (yaffs_Object *));
+ 
+-yaffs_Object *yaffs_FindObjectByNumber(yaffs_Device * dev, __u32 number);
++yaffs_Object *yaffs_FindObjectByNumber(yaffs_Device *dev, __u32 number);
+ 
+ /* Link operations */
+-yaffs_Object *yaffs_Link(yaffs_Object * parent, const YCHAR * name,
+-			 yaffs_Object * equivalentObject);
++yaffs_Object *yaffs_Link(yaffs_Object *parent, const YCHAR *name,
++			 yaffs_Object *equivalentObject);
+ 
+-yaffs_Object *yaffs_GetEquivalentObject(yaffs_Object * obj);
++yaffs_Object *yaffs_GetEquivalentObject(yaffs_Object *obj);
+ 
+ /* Symlink operations */
+-yaffs_Object *yaffs_MknodSymLink(yaffs_Object * parent, const YCHAR * name,
++yaffs_Object *yaffs_MknodSymLink(yaffs_Object *parent, const YCHAR *name,
+ 				 __u32 mode, __u32 uid, __u32 gid,
+-				 const YCHAR * alias);
+-YCHAR *yaffs_GetSymlinkAlias(yaffs_Object * obj);
++				 const YCHAR *alias);
++YCHAR *yaffs_GetSymlinkAlias(yaffs_Object *obj);
+ 
+ /* Special inodes (fifos, sockets and devices) */
+-yaffs_Object *yaffs_MknodSpecial(yaffs_Object * parent, const YCHAR * name,
++yaffs_Object *yaffs_MknodSpecial(yaffs_Object *parent, const YCHAR *name,
+ 				 __u32 mode, __u32 uid, __u32 gid, __u32 rdev);
+ 
+ /* Special directories */
+-yaffs_Object *yaffs_Root(yaffs_Device * dev);
+-yaffs_Object *yaffs_LostNFound(yaffs_Device * dev);
++yaffs_Object *yaffs_Root(yaffs_Device *dev);
++yaffs_Object *yaffs_LostNFound(yaffs_Device *dev);
+ 
+ #ifdef CONFIG_YAFFS_WINCE
+ /* CONFIG_YAFFS_WINCE special stuff */
+@@ -885,18 +884,21 @@ void yfsd_WinFileTimeNow(__u32 target[2]
+ 
+ #ifdef __KERNEL__
+ 
+-void yaffs_HandleDeferedFree(yaffs_Object * obj);
++void yaffs_HandleDeferedFree(yaffs_Object *obj);
+ #endif
+ 
+ /* Debug dump  */
+-int yaffs_DumpObject(yaffs_Object * obj);
++int yaffs_DumpObject(yaffs_Object *obj);
+ 
+-void yaffs_GutsTest(yaffs_Device * dev);
++void yaffs_GutsTest(yaffs_Device *dev);
+ 
+ /* A few useful functions */
+-void yaffs_InitialiseTags(yaffs_ExtendedTags * tags);
+-void yaffs_DeleteChunk(yaffs_Device * dev, int chunkId, int markNAND, int lyn);
+-int yaffs_CheckFF(__u8 * buffer, int nBytes);
++void yaffs_InitialiseTags(yaffs_ExtendedTags *tags);
++void yaffs_DeleteChunk(yaffs_Device *dev, int chunkId, int markNAND, int lyn);
++int yaffs_CheckFF(__u8 *buffer, int nBytes);
+ void yaffs_HandleChunkError(yaffs_Device *dev, yaffs_BlockInfo *bi);
+ 
++__u8 *yaffs_GetTempBuffer(yaffs_Device *dev, int lineNo);
++void yaffs_ReleaseTempBuffer(yaffs_Device *dev, __u8 *buffer, int lineNo);
++
+ #endif
+--- a/fs/yaffs2/yaffs_mtdif1.c
++++ b/fs/yaffs2/yaffs_mtdif1.c
+@@ -26,7 +26,7 @@
+ #include "yportenv.h"
+ #include "yaffs_guts.h"
+ #include "yaffs_packedtags1.h"
+-#include "yaffs_tagscompat.h"	// for yaffs_CalcTagsECC
++#include "yaffs_tagscompat.h"	/* for yaffs_CalcTagsECC */
+ 
+ #include "linux/kernel.h"
+ #include "linux/version.h"
+@@ -34,9 +34,9 @@
+ #include "linux/mtd/mtd.h"
+ 
+ /* Don't compile this module if we don't have MTD's mtd_oob_ops interface */
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 
+-const char *yaffs_mtdif1_c_version = "$Id: yaffs_mtdif1.c,v 1.3 2007/05/15 20:16:11 ian Exp $";
++const char *yaffs_mtdif1_c_version = "$Id: yaffs_mtdif1.c,v 1.10 2009-03-09 07:41:10 charles Exp $";
+ 
+ #ifndef CONFIG_YAFFS_9BYTE_TAGS
+ # define YTAG1_SIZE 8
+@@ -89,9 +89,9 @@ static struct nand_ecclayout nand_oob_16
+  * Returns YAFFS_OK or YAFFS_FAIL.
+  */
+ int nandmtd1_WriteChunkWithTagsToNAND(yaffs_Device *dev,
+-	int chunkInNAND, const __u8 * data, const yaffs_ExtendedTags * etags)
++	int chunkInNAND, const __u8 *data, const yaffs_ExtendedTags *etags)
+ {
+-	struct mtd_info * mtd = dev->genericDevice;
++	struct mtd_info *mtd = dev->genericDevice;
+ 	int chunkBytes = dev->nDataBytesPerChunk;
+ 	loff_t addr = ((loff_t)chunkInNAND) * chunkBytes;
+ 	struct mtd_oob_ops ops;
+@@ -146,7 +146,7 @@ int nandmtd1_WriteChunkWithTagsToNAND(ya
+ 
+ /* Return with empty ExtendedTags but add eccResult.
+  */
+-static int rettags(yaffs_ExtendedTags * etags, int eccResult, int retval)
++static int rettags(yaffs_ExtendedTags *etags, int eccResult, int retval)
+ {
+ 	if (etags) {
+ 		memset(etags, 0, sizeof(*etags));
+@@ -169,9 +169,9 @@ static int rettags(yaffs_ExtendedTags * 
+  * Returns YAFFS_OK or YAFFS_FAIL.
+  */
+ int nandmtd1_ReadChunkWithTagsFromNAND(yaffs_Device *dev,
+-	int chunkInNAND, __u8 * data, yaffs_ExtendedTags * etags)
++	int chunkInNAND, __u8 *data, yaffs_ExtendedTags *etags)
+ {
+-	struct mtd_info * mtd = dev->genericDevice;
++	struct mtd_info *mtd = dev->genericDevice;
+ 	int chunkBytes = dev->nDataBytesPerChunk;
+ 	loff_t addr = ((loff_t)chunkInNAND) * chunkBytes;
+ 	int eccres = YAFFS_ECC_RESULT_NO_ERROR;
+@@ -189,7 +189,7 @@ int nandmtd1_ReadChunkWithTagsFromNAND(y
+ 	ops.datbuf = data;
+ 	ops.oobbuf = (__u8 *)&pt1;
+ 
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20))
++#if (MTD_VERSION_CODE < MTD_VERSION(2, 6, 20))
+ 	/* In MTD 2.6.18 to 2.6.19 nand_base.c:nand_do_read_oob() has a bug;
+ 	 * help it out with ops.len = ops.ooblen when ops.datbuf == NULL.
+ 	 */
+@@ -284,11 +284,11 @@ int nandmtd1_ReadChunkWithTagsFromNAND(y
+  */
+ int nandmtd1_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo)
+ {
+-	struct mtd_info * mtd = dev->genericDevice;
++	struct mtd_info *mtd = dev->genericDevice;
+ 	int blocksize = dev->nChunksPerBlock * dev->nDataBytesPerChunk;
+ 	int retval;
+ 
+-	yaffs_trace(YAFFS_TRACE_BAD_BLOCKS, "marking block %d bad", blockNo);
++	yaffs_trace(YAFFS_TRACE_BAD_BLOCKS, "marking block %d bad\n", blockNo);
+ 
+ 	retval = mtd->block_markbad(mtd, (loff_t)blocksize * blockNo);
+ 	return (retval) ? YAFFS_FAIL : YAFFS_OK;
+@@ -298,7 +298,7 @@ int nandmtd1_MarkNANDBlockBad(struct yaf
+  *
+  * Returns YAFFS_OK or YAFFS_FAIL.
+  */
+-static int nandmtd1_TestPrerequists(struct mtd_info * mtd)
++static int nandmtd1_TestPrerequists(struct mtd_info *mtd)
+ {
+ 	/* 2.6.18 has mtd->ecclayout->oobavail */
+ 	/* 2.6.21 has mtd->ecclayout->oobavail and mtd->oobavail */
+@@ -323,10 +323,11 @@ static int nandmtd1_TestPrerequists(stru
+  * Always returns YAFFS_OK.
+  */
+ int nandmtd1_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+-	yaffs_BlockState * pState, int *pSequenceNumber)
++	yaffs_BlockState *pState, __u32 *pSequenceNumber)
+ {
+-	struct mtd_info * mtd = dev->genericDevice;
++	struct mtd_info *mtd = dev->genericDevice;
+ 	int chunkNo = blockNo * dev->nChunksPerBlock;
++	loff_t addr = (loff_t)chunkNo * dev->nDataBytesPerChunk;
+ 	yaffs_ExtendedTags etags;
+ 	int state = YAFFS_BLOCK_STATE_DEAD;
+ 	int seqnum = 0;
+@@ -335,21 +336,22 @@ int nandmtd1_QueryNANDBlock(struct yaffs
+ 	/* We don't yet have a good place to test for MTD config prerequists.
+ 	 * Do it here as we are called during the initial scan.
+ 	 */
+-	if (nandmtd1_TestPrerequists(mtd) != YAFFS_OK) {
++	if (nandmtd1_TestPrerequists(mtd) != YAFFS_OK)
+ 		return YAFFS_FAIL;
+-	}
+ 
+ 	retval = nandmtd1_ReadChunkWithTagsFromNAND(dev, chunkNo, NULL, &etags);
++	etags.blockBad = (mtd->block_isbad)(mtd, addr);
+ 	if (etags.blockBad) {
+ 		yaffs_trace(YAFFS_TRACE_BAD_BLOCKS,
+-			"block %d is marked bad", blockNo);
++			"block %d is marked bad\n", blockNo);
+ 		state = YAFFS_BLOCK_STATE_DEAD;
+-	}
+-	else if (etags.chunkUsed) {
++	} else if (etags.eccResult != YAFFS_ECC_RESULT_NO_ERROR) {
++		/* bad tags, need to look more closely */
++		state = YAFFS_BLOCK_STATE_NEEDS_SCANNING;
++	} else if (etags.chunkUsed) {
+ 		state = YAFFS_BLOCK_STATE_NEEDS_SCANNING;
+ 		seqnum = etags.sequenceNumber;
+-	}
+-	else {
++	} else {
+ 		state = YAFFS_BLOCK_STATE_EMPTY;
+ 	}
+ 
+@@ -360,4 +362,4 @@ int nandmtd1_QueryNANDBlock(struct yaffs
+ 	return YAFFS_OK;
+ }
+ 
+-#endif /*KERNEL_VERSION*/
++#endif /*MTD_VERSION*/
+--- a/fs/yaffs2/yaffs_mtdif1.h
++++ b/fs/yaffs2/yaffs_mtdif1.h
+@@ -14,15 +14,15 @@
+ #ifndef __YAFFS_MTDIF1_H__
+ #define __YAFFS_MTDIF1_H__
+ 
+-int nandmtd1_WriteChunkWithTagsToNAND(yaffs_Device * dev, int chunkInNAND,
+-	const __u8 * data, const yaffs_ExtendedTags * tags);
++int nandmtd1_WriteChunkWithTagsToNAND(yaffs_Device *dev, int chunkInNAND,
++	const __u8 *data, const yaffs_ExtendedTags *tags);
+ 
+-int nandmtd1_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+-	__u8 * data, yaffs_ExtendedTags * tags);
++int nandmtd1_ReadChunkWithTagsFromNAND(yaffs_Device *dev, int chunkInNAND,
++	__u8 *data, yaffs_ExtendedTags *tags);
+ 
+ int nandmtd1_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo);
+ 
+ int nandmtd1_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+-	yaffs_BlockState * state, int *sequenceNumber);
++	yaffs_BlockState *state, __u32 *sequenceNumber);
+ 
+ #endif
+--- a/fs/yaffs2/yaffs_mtdif2.c
++++ b/fs/yaffs2/yaffs_mtdif2.c
+@@ -14,7 +14,7 @@
+ /* mtd interface for YAFFS2 */
+ 
+ const char *yaffs_mtdif2_c_version =
+-    "$Id: yaffs_mtdif2.c,v 1.17 2007-02-14 01:09:06 wookey Exp $";
++	"$Id: yaffs_mtdif2.c,v 1.23 2009-03-06 17:20:53 wookey Exp $";
+ 
+ #include "yportenv.h"
+ 
+@@ -27,19 +27,23 @@ const char *yaffs_mtdif2_c_version =
+ 
+ #include "yaffs_packedtags2.h"
+ 
+-int nandmtd2_WriteChunkWithTagsToNAND(yaffs_Device * dev, int chunkInNAND,
+-				      const __u8 * data,
+-				      const yaffs_ExtendedTags * tags)
++/* NB For use with inband tags....
++ * We assume that the data buffer is of size totalBytersPerChunk so that we can also
++ * use it to load the tags.
++ */
++int nandmtd2_WriteChunkWithTagsToNAND(yaffs_Device *dev, int chunkInNAND,
++				      const __u8 *data,
++				      const yaffs_ExtendedTags *tags)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	struct mtd_oob_ops ops;
+ #else
+ 	size_t dummy;
+ #endif
+ 	int retval = 0;
+ 
+-	loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
++	loff_t addr;
+ 
+ 	yaffs_PackedTags2 pt;
+ 
+@@ -48,46 +52,40 @@ int nandmtd2_WriteChunkWithTagsToNAND(ya
+ 	   ("nandmtd2_WriteChunkWithTagsToNAND chunk %d data %p tags %p"
+ 	    TENDSTR), chunkInNAND, data, tags));
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-	if (tags)
+-		yaffs_PackTags2(&pt, tags);
+-	else
+-		BUG(); /* both tags and data should always be present */
+ 
+-	if (data) {
+-		ops.mode = MTD_OOB_AUTO;
+-		ops.ooblen = sizeof(pt);
+-		ops.len = dev->nDataBytesPerChunk;
+-		ops.ooboffs = 0;
+-		ops.datbuf = (__u8 *)data;
+-		ops.oobbuf = (void *)&pt;
+-		retval = mtd->write_oob(mtd, addr, &ops);
++	addr  = ((loff_t) chunkInNAND) * dev->totalBytesPerChunk;
++
++	/* For yaffs2 writing there must be both data and tags.
++	 * If we're using inband tags, then the tags are stuffed into
++	 * the end of the data buffer.
++	 */
++	if (!data || !tags)
++		BUG();
++	else if (dev->inbandTags) {
++		yaffs_PackedTags2TagsPart *pt2tp;
++		pt2tp = (yaffs_PackedTags2TagsPart *)(data + dev->nDataBytesPerChunk);
++		yaffs_PackTags2TagsPart(pt2tp, tags);
+ 	} else
+-		BUG(); /* both tags and data should always be present */
+-#else
+-	if (tags) {
+ 		yaffs_PackTags2(&pt, tags);
+-	}
+ 
+-	if (data && tags) {
+-		if (dev->useNANDECC)
+-			retval =
+-			    mtd->write_ecc(mtd, addr, dev->nDataBytesPerChunk,
+-					   &dummy, data, (__u8 *) & pt, NULL);
+-		else
+-			retval =
+-			    mtd->write_ecc(mtd, addr, dev->nDataBytesPerChunk,
+-					   &dummy, data, (__u8 *) & pt, NULL);
+-	} else {
+-		if (data)
+-			retval =
+-			    mtd->write(mtd, addr, dev->nDataBytesPerChunk, &dummy,
+-				       data);
+-		if (tags)
+-			retval =
+-			    mtd->write_oob(mtd, addr, mtd->oobsize, &dummy,
+-					   (__u8 *) & pt);
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
++	ops.mode = MTD_OOB_AUTO;
++	ops.ooblen = (dev->inbandTags) ? 0 : sizeof(pt);
++	ops.len = dev->totalBytesPerChunk;
++	ops.ooboffs = 0;
++	ops.datbuf = (__u8 *)data;
++	ops.oobbuf = (dev->inbandTags) ? NULL : (void *)&pt;
++	retval = mtd->write_oob(mtd, addr, &ops);
+ 
++#else
++	if (!dev->inbandTags) {
++		retval =
++		    mtd->write_ecc(mtd, addr, dev->nDataBytesPerChunk,
++				   &dummy, data, (__u8 *) &pt, NULL);
++	} else {
++		retval =
++		    mtd->write(mtd, addr, dev->totalBytesPerChunk, &dummy,
++			       data);
+ 	}
+ #endif
+ 
+@@ -97,17 +95,18 @@ int nandmtd2_WriteChunkWithTagsToNAND(ya
+ 		return YAFFS_FAIL;
+ }
+ 
+-int nandmtd2_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+-				       __u8 * data, yaffs_ExtendedTags * tags)
++int nandmtd2_ReadChunkWithTagsFromNAND(yaffs_Device *dev, int chunkInNAND,
++				       __u8 *data, yaffs_ExtendedTags *tags)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	struct mtd_oob_ops ops;
+ #endif
+ 	size_t dummy;
+ 	int retval = 0;
++	int localData = 0;
+ 
+-	loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
++	loff_t addr = ((loff_t) chunkInNAND) * dev->totalBytesPerChunk;
+ 
+ 	yaffs_PackedTags2 pt;
+ 
+@@ -116,9 +115,20 @@ int nandmtd2_ReadChunkWithTagsFromNAND(y
+ 	   ("nandmtd2_ReadChunkWithTagsFromNAND chunk %d data %p tags %p"
+ 	    TENDSTR), chunkInNAND, data, tags));
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-	if (data && !tags)
+-		retval = mtd->read(mtd, addr, dev->nDataBytesPerChunk,
++	if (dev->inbandTags) {
++
++		if (!data) {
++			localData = 1;
++			data = yaffs_GetTempBuffer(dev, __LINE__);
++		}
++
++
++	}
++
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
++	if (dev->inbandTags || (data && !tags))
++		retval = mtd->read(mtd, addr, dev->totalBytesPerChunk,
+ 				&dummy, data);
+ 	else if (tags) {
+ 		ops.mode = MTD_OOB_AUTO;
+@@ -130,38 +140,42 @@ int nandmtd2_ReadChunkWithTagsFromNAND(y
+ 		retval = mtd->read_oob(mtd, addr, &ops);
+ 	}
+ #else
+-	if (data && tags) {
+-		if (dev->useNANDECC) {
+-			retval =
+-			    mtd->read_ecc(mtd, addr, dev->nDataBytesPerChunk,
+-					  &dummy, data, dev->spareBuffer,
+-					  NULL);
+-		} else {
+-			retval =
+-			    mtd->read_ecc(mtd, addr, dev->nDataBytesPerChunk,
++	if (!dev->inbandTags && data && tags) {
++
++		retval = mtd->read_ecc(mtd, addr, dev->nDataBytesPerChunk,
+ 					  &dummy, data, dev->spareBuffer,
+ 					  NULL);
+-		}
+ 	} else {
+ 		if (data)
+ 			retval =
+ 			    mtd->read(mtd, addr, dev->nDataBytesPerChunk, &dummy,
+ 				      data);
+-		if (tags)
++		if (!dev->inbandTags && tags)
+ 			retval =
+ 			    mtd->read_oob(mtd, addr, mtd->oobsize, &dummy,
+ 					  dev->spareBuffer);
+ 	}
+ #endif
+ 
+-	memcpy(&pt, dev->spareBuffer, sizeof(pt));
+ 
+-	if (tags)
+-		yaffs_UnpackTags2(tags, &pt);
++	if (dev->inbandTags) {
++		if (tags) {
++			yaffs_PackedTags2TagsPart *pt2tp;
++			pt2tp = (yaffs_PackedTags2TagsPart *)&data[dev->nDataBytesPerChunk];
++			yaffs_UnpackTags2TagsPart(tags, pt2tp);
++		}
++	} else {
++		if (tags) {
++			memcpy(&pt, dev->spareBuffer, sizeof(pt));
++			yaffs_UnpackTags2(tags, &pt);
++		}
++	}
+ 
+-	if(tags && retval == -EBADMSG && tags->eccResult == YAFFS_ECC_RESULT_NO_ERROR)
+-		tags->eccResult = YAFFS_ECC_RESULT_UNFIXED;
++	if (localData)
++		yaffs_ReleaseTempBuffer(dev, data, __LINE__);
+ 
++	if (tags && retval == -EBADMSG && tags->eccResult == YAFFS_ECC_RESULT_NO_ERROR)
++		tags->eccResult = YAFFS_ECC_RESULT_UNFIXED;
+ 	if (retval == 0)
+ 		return YAFFS_OK;
+ 	else
+@@ -178,7 +192,7 @@ int nandmtd2_MarkNANDBlockBad(struct yaf
+ 	retval =
+ 	    mtd->block_markbad(mtd,
+ 			       blockNo * dev->nChunksPerBlock *
+-			       dev->nDataBytesPerChunk);
++			       dev->totalBytesPerChunk);
+ 
+ 	if (retval == 0)
+ 		return YAFFS_OK;
+@@ -188,7 +202,7 @@ int nandmtd2_MarkNANDBlockBad(struct yaf
+ }
+ 
+ int nandmtd2_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+-			    yaffs_BlockState * state, int *sequenceNumber)
++			    yaffs_BlockState *state, __u32 *sequenceNumber)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+ 	int retval;
+@@ -198,7 +212,7 @@ int nandmtd2_QueryNANDBlock(struct yaffs
+ 	retval =
+ 	    mtd->block_isbad(mtd,
+ 			     blockNo * dev->nChunksPerBlock *
+-			     dev->nDataBytesPerChunk);
++			     dev->totalBytesPerChunk);
+ 
+ 	if (retval) {
+ 		T(YAFFS_TRACE_MTD, (TSTR("block is bad" TENDSTR)));
+--- a/fs/yaffs2/yaffs_mtdif2.h
++++ b/fs/yaffs2/yaffs_mtdif2.h
+@@ -17,13 +17,13 @@
+ #define __YAFFS_MTDIF2_H__
+ 
+ #include "yaffs_guts.h"
+-int nandmtd2_WriteChunkWithTagsToNAND(yaffs_Device * dev, int chunkInNAND,
+-				      const __u8 * data,
+-				      const yaffs_ExtendedTags * tags);
+-int nandmtd2_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+-				       __u8 * data, yaffs_ExtendedTags * tags);
++int nandmtd2_WriteChunkWithTagsToNAND(yaffs_Device *dev, int chunkInNAND,
++				const __u8 *data,
++				const yaffs_ExtendedTags *tags);
++int nandmtd2_ReadChunkWithTagsFromNAND(yaffs_Device *dev, int chunkInNAND,
++				__u8 *data, yaffs_ExtendedTags *tags);
+ int nandmtd2_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo);
+ int nandmtd2_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+-			    yaffs_BlockState * state, int *sequenceNumber);
++			yaffs_BlockState *state, __u32 *sequenceNumber);
+ 
+ #endif
+--- a/fs/yaffs2/yaffs_mtdif.c
++++ b/fs/yaffs2/yaffs_mtdif.c
+@@ -12,7 +12,7 @@
+  */
+ 
+ const char *yaffs_mtdif_c_version =
+-    "$Id: yaffs_mtdif.c,v 1.19 2007-02-14 01:09:06 wookey Exp $";
++	"$Id: yaffs_mtdif.c,v 1.22 2009-03-06 17:20:51 wookey Exp $";
+ 
+ #include "yportenv.h"
+ 
+@@ -24,7 +24,7 @@ const char *yaffs_mtdif_c_version =
+ #include "linux/time.h"
+ #include "linux/mtd/nand.h"
+ 
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18))
++#if (MTD_VERSION_CODE < MTD_VERSION(2, 6, 18))
+ static struct nand_oobinfo yaffs_oobinfo = {
+ 	.useecc = 1,
+ 	.eccbytes = 6,
+@@ -36,7 +36,7 @@ static struct nand_oobinfo yaffs_noeccin
+ };
+ #endif
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ static inline void translate_spare2oob(const yaffs_Spare *spare, __u8 *oob)
+ {
+ 	oob[0] = spare->tagByte0;
+@@ -45,8 +45,8 @@ static inline void translate_spare2oob(c
+ 	oob[3] = spare->tagByte3;
+ 	oob[4] = spare->tagByte4;
+ 	oob[5] = spare->tagByte5 & 0x3f;
+-	oob[5] |= spare->blockStatus == 'Y' ? 0: 0x80;
+-	oob[5] |= spare->pageStatus == 0 ? 0: 0x40;
++	oob[5] |= spare->blockStatus == 'Y' ? 0 : 0x80;
++	oob[5] |= spare->pageStatus == 0 ? 0 : 0x40;
+ 	oob[6] = spare->tagByte6;
+ 	oob[7] = spare->tagByte7;
+ }
+@@ -71,18 +71,18 @@ static inline void translate_oob2spare(y
+ }
+ #endif
+ 
+-int nandmtd_WriteChunkToNAND(yaffs_Device * dev, int chunkInNAND,
+-			     const __u8 * data, const yaffs_Spare * spare)
++int nandmtd_WriteChunkToNAND(yaffs_Device *dev, int chunkInNAND,
++			     const __u8 *data, const yaffs_Spare *spare)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	struct mtd_oob_ops ops;
+ #endif
+ 	size_t dummy;
+ 	int retval = 0;
+ 
+ 	loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	__u8 spareAsBytes[8]; /* OOB */
+ 
+ 	if (data && !spare)
+@@ -135,18 +135,18 @@ int nandmtd_WriteChunkToNAND(yaffs_Devic
+ 		return YAFFS_FAIL;
+ }
+ 
+-int nandmtd_ReadChunkFromNAND(yaffs_Device * dev, int chunkInNAND, __u8 * data,
+-			      yaffs_Spare * spare)
++int nandmtd_ReadChunkFromNAND(yaffs_Device *dev, int chunkInNAND, __u8 *data,
++			      yaffs_Spare *spare)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	struct mtd_oob_ops ops;
+ #endif
+ 	size_t dummy;
+ 	int retval = 0;
+ 
+ 	loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	__u8 spareAsBytes[8]; /* OOB */
+ 
+ 	if (data && !spare)
+@@ -205,7 +205,7 @@ int nandmtd_ReadChunkFromNAND(yaffs_Devi
+ 		return YAFFS_FAIL;
+ }
+ 
+-int nandmtd_EraseBlockInNAND(yaffs_Device * dev, int blockNumber)
++int nandmtd_EraseBlockInNAND(yaffs_Device *dev, int blockNumber)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+ 	__u32 addr =
+@@ -234,7 +234,7 @@ int nandmtd_EraseBlockInNAND(yaffs_Devic
+ 		return YAFFS_FAIL;
+ }
+ 
+-int nandmtd_InitialiseNAND(yaffs_Device * dev)
++int nandmtd_InitialiseNAND(yaffs_Device *dev)
+ {
+ 	return YAFFS_OK;
+ }
+--- a/fs/yaffs2/yaffs_mtdif.h
++++ b/fs/yaffs2/yaffs_mtdif.h
+@@ -18,10 +18,15 @@
+ 
+ #include "yaffs_guts.h"
+ 
+-int nandmtd_WriteChunkToNAND(yaffs_Device * dev, int chunkInNAND,
+-			     const __u8 * data, const yaffs_Spare * spare);
+-int nandmtd_ReadChunkFromNAND(yaffs_Device * dev, int chunkInNAND, __u8 * data,
+-			      yaffs_Spare * spare);
+-int nandmtd_EraseBlockInNAND(yaffs_Device * dev, int blockNumber);
+-int nandmtd_InitialiseNAND(yaffs_Device * dev);
++#if (MTD_VERSION_CODE < MTD_VERSION(2, 6, 18))
++extern struct nand_oobinfo yaffs_oobinfo;
++extern struct nand_oobinfo yaffs_noeccinfo;
++#endif
++
++int nandmtd_WriteChunkToNAND(yaffs_Device *dev, int chunkInNAND,
++			const __u8 *data, const yaffs_Spare *spare);
++int nandmtd_ReadChunkFromNAND(yaffs_Device *dev, int chunkInNAND, __u8 *data,
++			yaffs_Spare *spare);
++int nandmtd_EraseBlockInNAND(yaffs_Device *dev, int blockNumber);
++int nandmtd_InitialiseNAND(yaffs_Device *dev);
+ #endif
+--- a/fs/yaffs2/yaffs_nand.c
++++ b/fs/yaffs2/yaffs_nand.c
+@@ -12,16 +12,17 @@
+  */
+ 
+ const char *yaffs_nand_c_version =
+-    "$Id: yaffs_nand.c,v 1.7 2007-02-14 01:09:06 wookey Exp $";
++	"$Id: yaffs_nand.c,v 1.10 2009-03-06 17:20:54 wookey Exp $";
+ 
+ #include "yaffs_nand.h"
+ #include "yaffs_tagscompat.h"
+ #include "yaffs_tagsvalidity.h"
+ 
++#include "yaffs_getblockinfo.h"
+ 
+-int yaffs_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+-					   __u8 * buffer,
+-					   yaffs_ExtendedTags * tags)
++int yaffs_ReadChunkWithTagsFromNAND(yaffs_Device *dev, int chunkInNAND,
++					   __u8 *buffer,
++					   yaffs_ExtendedTags *tags)
+ {
+ 	int result;
+ 	yaffs_ExtendedTags localTags;
+@@ -29,7 +30,7 @@ int yaffs_ReadChunkWithTagsFromNAND(yaff
+ 	int realignedChunkInNAND = chunkInNAND - dev->chunkOffset;
+ 
+ 	/* If there are no tags provided, use local tags to get prioritised gc working */
+-	if(!tags)
++	if (!tags)
+ 		tags = &localTags;
+ 
+ 	if (dev->readChunkWithTagsFromNAND)
+@@ -40,20 +41,20 @@ int yaffs_ReadChunkWithTagsFromNAND(yaff
+ 									realignedChunkInNAND,
+ 									buffer,
+ 									tags);
+-	if(tags &&
+-	   tags->eccResult > YAFFS_ECC_RESULT_NO_ERROR){
++	if (tags &&
++	   tags->eccResult > YAFFS_ECC_RESULT_NO_ERROR) {
+ 
+ 		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, chunkInNAND/dev->nChunksPerBlock);
+-                yaffs_HandleChunkError(dev,bi);
++		yaffs_HandleChunkError(dev, bi);
+ 	}
+ 
+ 	return result;
+ }
+ 
+-int yaffs_WriteChunkWithTagsToNAND(yaffs_Device * dev,
++int yaffs_WriteChunkWithTagsToNAND(yaffs_Device *dev,
+ 						   int chunkInNAND,
+-						   const __u8 * buffer,
+-						   yaffs_ExtendedTags * tags)
++						   const __u8 *buffer,
++						   yaffs_ExtendedTags *tags)
+ {
+ 	chunkInNAND -= dev->chunkOffset;
+ 
+@@ -84,7 +85,7 @@ int yaffs_WriteChunkWithTagsToNAND(yaffs
+ 								       tags);
+ }
+ 
+-int yaffs_MarkBlockBad(yaffs_Device * dev, int blockNo)
++int yaffs_MarkBlockBad(yaffs_Device *dev, int blockNo)
+ {
+ 	blockNo -= dev->blockOffset;
+ 
+@@ -95,10 +96,10 @@ int yaffs_MarkBlockBad(yaffs_Device * de
+ 		return yaffs_TagsCompatabilityMarkNANDBlockBad(dev, blockNo);
+ }
+ 
+-int yaffs_QueryInitialBlockState(yaffs_Device * dev,
++int yaffs_QueryInitialBlockState(yaffs_Device *dev,
+ 						 int blockNo,
+-						 yaffs_BlockState * state,
+-						 unsigned *sequenceNumber)
++						 yaffs_BlockState *state,
++						 __u32 *sequenceNumber)
+ {
+ 	blockNo -= dev->blockOffset;
+ 
+--- a/fs/yaffs2/yaffs_nandemul2k.h
++++ b/fs/yaffs2/yaffs_nandemul2k.h
+@@ -21,14 +21,14 @@
+ #include "yaffs_guts.h"
+ 
+ int nandemul2k_WriteChunkWithTagsToNAND(struct yaffs_DeviceStruct *dev,
+-					int chunkInNAND, const __u8 * data,
+-					yaffs_ExtendedTags * tags);
++					int chunkInNAND, const __u8 *data,
++					const yaffs_ExtendedTags *tags);
+ int nandemul2k_ReadChunkWithTagsFromNAND(struct yaffs_DeviceStruct *dev,
+-					 int chunkInNAND, __u8 * data,
+-					 yaffs_ExtendedTags * tags);
++					 int chunkInNAND, __u8 *data,
++					 yaffs_ExtendedTags *tags);
+ int nandemul2k_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo);
+ int nandemul2k_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+-			      yaffs_BlockState * state, int *sequenceNumber);
++			      yaffs_BlockState *state, __u32 *sequenceNumber);
+ int nandemul2k_EraseBlockInNAND(struct yaffs_DeviceStruct *dev,
+ 				int blockInNAND);
+ int nandemul2k_InitialiseNAND(struct yaffs_DeviceStruct *dev);
+--- a/fs/yaffs2/yaffs_nand.h
++++ b/fs/yaffs2/yaffs_nand.h
+@@ -19,21 +19,21 @@
+ 
+ 
+ 
+-int yaffs_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+-					   __u8 * buffer,
+-					   yaffs_ExtendedTags * tags);
+-
+-int yaffs_WriteChunkWithTagsToNAND(yaffs_Device * dev,
+-						   int chunkInNAND,
+-						   const __u8 * buffer,
+-						   yaffs_ExtendedTags * tags);
+-
+-int yaffs_MarkBlockBad(yaffs_Device * dev, int blockNo);
+-
+-int yaffs_QueryInitialBlockState(yaffs_Device * dev,
+-						 int blockNo,
+-						 yaffs_BlockState * state,
+-						 unsigned *sequenceNumber);
++int yaffs_ReadChunkWithTagsFromNAND(yaffs_Device *dev, int chunkInNAND,
++					__u8 *buffer,
++					yaffs_ExtendedTags *tags);
++
++int yaffs_WriteChunkWithTagsToNAND(yaffs_Device *dev,
++						int chunkInNAND,
++						const __u8 *buffer,
++						yaffs_ExtendedTags *tags);
++
++int yaffs_MarkBlockBad(yaffs_Device *dev, int blockNo);
++
++int yaffs_QueryInitialBlockState(yaffs_Device *dev,
++						int blockNo,
++						yaffs_BlockState *state,
++						unsigned *sequenceNumber);
+ 
+ int yaffs_EraseBlockInNAND(struct yaffs_DeviceStruct *dev,
+ 				  int blockInNAND);
+--- a/fs/yaffs2/yaffs_packedtags1.c
++++ b/fs/yaffs2/yaffs_packedtags1.c
+@@ -14,7 +14,7 @@
+ #include "yaffs_packedtags1.h"
+ #include "yportenv.h"
+ 
+-void yaffs_PackTags1(yaffs_PackedTags1 * pt, const yaffs_ExtendedTags * t)
++void yaffs_PackTags1(yaffs_PackedTags1 *pt, const yaffs_ExtendedTags *t)
+ {
+ 	pt->chunkId = t->chunkId;
+ 	pt->serialNumber = t->serialNumber;
+@@ -27,7 +27,7 @@ void yaffs_PackTags1(yaffs_PackedTags1 *
+ 
+ }
+ 
+-void yaffs_UnpackTags1(yaffs_ExtendedTags * t, const yaffs_PackedTags1 * pt)
++void yaffs_UnpackTags1(yaffs_ExtendedTags *t, const yaffs_PackedTags1 *pt)
+ {
+ 	static const __u8 allFF[] =
+ 	    { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+@@ -35,9 +35,8 @@ void yaffs_UnpackTags1(yaffs_ExtendedTag
+ 
+ 	if (memcmp(allFF, pt, sizeof(yaffs_PackedTags1))) {
+ 		t->blockBad = 0;
+-		if (pt->shouldBeFF != 0xFFFFFFFF) {
++		if (pt->shouldBeFF != 0xFFFFFFFF)
+ 			t->blockBad = 1;
+-		}
+ 		t->chunkUsed = 1;
+ 		t->objectId = pt->objectId;
+ 		t->chunkId = pt->chunkId;
+@@ -47,6 +46,5 @@ void yaffs_UnpackTags1(yaffs_ExtendedTag
+ 		t->serialNumber = pt->serialNumber;
+ 	} else {
+ 		memset(t, 0, sizeof(yaffs_ExtendedTags));
+-
+ 	}
+ }
+--- a/fs/yaffs2/yaffs_packedtags1.h
++++ b/fs/yaffs2/yaffs_packedtags1.h
+@@ -32,6 +32,6 @@ typedef struct {
+ 
+ } yaffs_PackedTags1;
+ 
+-void yaffs_PackTags1(yaffs_PackedTags1 * pt, const yaffs_ExtendedTags * t);
+-void yaffs_UnpackTags1(yaffs_ExtendedTags * t, const yaffs_PackedTags1 * pt);
++void yaffs_PackTags1(yaffs_PackedTags1 *pt, const yaffs_ExtendedTags *t);
++void yaffs_UnpackTags1(yaffs_ExtendedTags *t, const yaffs_PackedTags1 *pt);
+ #endif
+--- a/fs/yaffs2/yaffs_packedtags2.c
++++ b/fs/yaffs2/yaffs_packedtags2.c
+@@ -37,60 +37,68 @@
+ #define EXTRA_OBJECT_TYPE_SHIFT (28)
+ #define EXTRA_OBJECT_TYPE_MASK  ((0x0F) << EXTRA_OBJECT_TYPE_SHIFT)
+ 
+-static void yaffs_DumpPackedTags2(const yaffs_PackedTags2 * pt)
++
++static void yaffs_DumpPackedTags2TagsPart(const yaffs_PackedTags2TagsPart *ptt)
+ {
+ 	T(YAFFS_TRACE_MTD,
+ 	  (TSTR("packed tags obj %d chunk %d byte %d seq %d" TENDSTR),
+-	   pt->t.objectId, pt->t.chunkId, pt->t.byteCount,
+-	   pt->t.sequenceNumber));
++	   ptt->objectId, ptt->chunkId, ptt->byteCount,
++	   ptt->sequenceNumber));
++}
++static void yaffs_DumpPackedTags2(const yaffs_PackedTags2 *pt)
++{
++	yaffs_DumpPackedTags2TagsPart(&pt->t);
+ }
+ 
+-static void yaffs_DumpTags2(const yaffs_ExtendedTags * t)
++static void yaffs_DumpTags2(const yaffs_ExtendedTags *t)
+ {
+ 	T(YAFFS_TRACE_MTD,
+ 	  (TSTR
+-	   ("ext.tags eccres %d blkbad %d chused %d obj %d chunk%d byte "
+-	    "%d del %d ser %d seq %d"
++	   ("ext.tags eccres %d blkbad %d chused %d obj %d chunk%d byte %d del %d ser %d seq %d"
+ 	    TENDSTR), t->eccResult, t->blockBad, t->chunkUsed, t->objectId,
+ 	   t->chunkId, t->byteCount, t->chunkDeleted, t->serialNumber,
+ 	   t->sequenceNumber));
+ 
+ }
+ 
+-void yaffs_PackTags2(yaffs_PackedTags2 * pt, const yaffs_ExtendedTags * t)
++void yaffs_PackTags2TagsPart(yaffs_PackedTags2TagsPart *ptt,
++		const yaffs_ExtendedTags *t)
+ {
+-	pt->t.chunkId = t->chunkId;
+-	pt->t.sequenceNumber = t->sequenceNumber;
+-	pt->t.byteCount = t->byteCount;
+-	pt->t.objectId = t->objectId;
++	ptt->chunkId = t->chunkId;
++	ptt->sequenceNumber = t->sequenceNumber;
++	ptt->byteCount = t->byteCount;
++	ptt->objectId = t->objectId;
+ 
+ 	if (t->chunkId == 0 && t->extraHeaderInfoAvailable) {
+ 		/* Store the extra header info instead */
+ 		/* We save the parent object in the chunkId */
+-		pt->t.chunkId = EXTRA_HEADER_INFO_FLAG
++		ptt->chunkId = EXTRA_HEADER_INFO_FLAG
+ 			| t->extraParentObjectId;
+-		if (t->extraIsShrinkHeader) {
+-			pt->t.chunkId |= EXTRA_SHRINK_FLAG;
+-		}
+-		if (t->extraShadows) {
+-			pt->t.chunkId |= EXTRA_SHADOWS_FLAG;
+-		}
++		if (t->extraIsShrinkHeader)
++			ptt->chunkId |= EXTRA_SHRINK_FLAG;
++		if (t->extraShadows)
++			ptt->chunkId |= EXTRA_SHADOWS_FLAG;
+ 
+-		pt->t.objectId &= ~EXTRA_OBJECT_TYPE_MASK;
+-		pt->t.objectId |=
++		ptt->objectId &= ~EXTRA_OBJECT_TYPE_MASK;
++		ptt->objectId |=
+ 		    (t->extraObjectType << EXTRA_OBJECT_TYPE_SHIFT);
+ 
+-		if (t->extraObjectType == YAFFS_OBJECT_TYPE_HARDLINK) {
+-			pt->t.byteCount = t->extraEquivalentObjectId;
+-		} else if (t->extraObjectType == YAFFS_OBJECT_TYPE_FILE) {
+-			pt->t.byteCount = t->extraFileLength;
+-		} else {
+-			pt->t.byteCount = 0;
+-		}
++		if (t->extraObjectType == YAFFS_OBJECT_TYPE_HARDLINK)
++			ptt->byteCount = t->extraEquivalentObjectId;
++		else if (t->extraObjectType == YAFFS_OBJECT_TYPE_FILE)
++			ptt->byteCount = t->extraFileLength;
++		else
++			ptt->byteCount = 0;
+ 	}
+ 
+-	yaffs_DumpPackedTags2(pt);
++	yaffs_DumpPackedTags2TagsPart(ptt);
+ 	yaffs_DumpTags2(t);
++}
++
++
++void yaffs_PackTags2(yaffs_PackedTags2 *pt, const yaffs_ExtendedTags *t)
++{
++	yaffs_PackTags2TagsPart(&pt->t, t);
+ 
+ #ifndef YAFFS_IGNORE_TAGS_ECC
+ 	{
+@@ -101,82 +109,98 @@ void yaffs_PackTags2(yaffs_PackedTags2 *
+ #endif
+ }
+ 
+-void yaffs_UnpackTags2(yaffs_ExtendedTags * t, yaffs_PackedTags2 * pt)
++
++void yaffs_UnpackTags2TagsPart(yaffs_ExtendedTags *t,
++		yaffs_PackedTags2TagsPart *ptt)
+ {
+ 
+ 	memset(t, 0, sizeof(yaffs_ExtendedTags));
+ 
+ 	yaffs_InitialiseTags(t);
+ 
+-	if (pt->t.sequenceNumber != 0xFFFFFFFF) {
+-		/* Page is in use */
+-#ifdef YAFFS_IGNORE_TAGS_ECC
+-		{
+-			t->eccResult = YAFFS_ECC_RESULT_NO_ERROR;
+-		}
+-#else
+-		{
+-			yaffs_ECCOther ecc;
+-			int result;
+-			yaffs_ECCCalculateOther((unsigned char *)&pt->t,
+-						sizeof
+-						(yaffs_PackedTags2TagsPart),
+-						&ecc);
+-			result =
+-			    yaffs_ECCCorrectOther((unsigned char *)&pt->t,
+-						  sizeof
+-						  (yaffs_PackedTags2TagsPart),
+-						  &pt->ecc, &ecc);
+-			switch(result){
+-				case 0:
+-					t->eccResult = YAFFS_ECC_RESULT_NO_ERROR;
+-					break;
+-				case 1:
+-					t->eccResult = YAFFS_ECC_RESULT_FIXED;
+-					break;
+-				case -1:
+-					t->eccResult = YAFFS_ECC_RESULT_UNFIXED;
+-					break;
+-				default:
+-					t->eccResult = YAFFS_ECC_RESULT_UNKNOWN;
+-			}
+-		}
+-#endif
++	if (ptt->sequenceNumber != 0xFFFFFFFF) {
+ 		t->blockBad = 0;
+ 		t->chunkUsed = 1;
+-		t->objectId = pt->t.objectId;
+-		t->chunkId = pt->t.chunkId;
+-		t->byteCount = pt->t.byteCount;
++		t->objectId = ptt->objectId;
++		t->chunkId = ptt->chunkId;
++		t->byteCount = ptt->byteCount;
+ 		t->chunkDeleted = 0;
+ 		t->serialNumber = 0;
+-		t->sequenceNumber = pt->t.sequenceNumber;
++		t->sequenceNumber = ptt->sequenceNumber;
+ 
+ 		/* Do extra header info stuff */
+ 
+-		if (pt->t.chunkId & EXTRA_HEADER_INFO_FLAG) {
++		if (ptt->chunkId & EXTRA_HEADER_INFO_FLAG) {
+ 			t->chunkId = 0;
+ 			t->byteCount = 0;
+ 
+ 			t->extraHeaderInfoAvailable = 1;
+ 			t->extraParentObjectId =
+-			    pt->t.chunkId & (~(ALL_EXTRA_FLAGS));
++			    ptt->chunkId & (~(ALL_EXTRA_FLAGS));
+ 			t->extraIsShrinkHeader =
+-			    (pt->t.chunkId & EXTRA_SHRINK_FLAG) ? 1 : 0;
++			    (ptt->chunkId & EXTRA_SHRINK_FLAG) ? 1 : 0;
+ 			t->extraShadows =
+-			    (pt->t.chunkId & EXTRA_SHADOWS_FLAG) ? 1 : 0;
++			    (ptt->chunkId & EXTRA_SHADOWS_FLAG) ? 1 : 0;
+ 			t->extraObjectType =
+-			    pt->t.objectId >> EXTRA_OBJECT_TYPE_SHIFT;
++			    ptt->objectId >> EXTRA_OBJECT_TYPE_SHIFT;
+ 			t->objectId &= ~EXTRA_OBJECT_TYPE_MASK;
+ 
+-			if (t->extraObjectType == YAFFS_OBJECT_TYPE_HARDLINK) {
+-				t->extraEquivalentObjectId = pt->t.byteCount;
+-			} else {
+-				t->extraFileLength = pt->t.byteCount;
++			if (t->extraObjectType == YAFFS_OBJECT_TYPE_HARDLINK)
++				t->extraEquivalentObjectId = ptt->byteCount;
++			else
++				t->extraFileLength = ptt->byteCount;
++		}
++	}
++
++	yaffs_DumpPackedTags2TagsPart(ptt);
++	yaffs_DumpTags2(t);
++
++}
++
++
++void yaffs_UnpackTags2(yaffs_ExtendedTags *t, yaffs_PackedTags2 *pt)
++{
++
++	yaffs_ECCResult eccResult = YAFFS_ECC_RESULT_NO_ERROR;
++
++	if (pt->t.sequenceNumber != 0xFFFFFFFF) {
++		/* Page is in use */
++#ifndef YAFFS_IGNORE_TAGS_ECC
++		{
++			yaffs_ECCOther ecc;
++			int result;
++			yaffs_ECCCalculateOther((unsigned char *)&pt->t,
++						sizeof
++						(yaffs_PackedTags2TagsPart),
++						&ecc);
++			result =
++			    yaffs_ECCCorrectOther((unsigned char *)&pt->t,
++						  sizeof
++						  (yaffs_PackedTags2TagsPart),
++						  &pt->ecc, &ecc);
++			switch (result) {
++			case 0:
++				eccResult = YAFFS_ECC_RESULT_NO_ERROR;
++				break;
++			case 1:
++				eccResult = YAFFS_ECC_RESULT_FIXED;
++				break;
++			case -1:
++				eccResult = YAFFS_ECC_RESULT_UNFIXED;
++				break;
++			default:
++				eccResult = YAFFS_ECC_RESULT_UNKNOWN;
+ 			}
+ 		}
++#endif
+ 	}
+ 
++	yaffs_UnpackTags2TagsPart(t, &pt->t);
++
++	t->eccResult = eccResult;
++
+ 	yaffs_DumpPackedTags2(pt);
+ 	yaffs_DumpTags2(t);
+ 
+ }
++
+--- a/fs/yaffs2/yaffs_packedtags2.h
++++ b/fs/yaffs2/yaffs_packedtags2.h
+@@ -33,6 +33,11 @@ typedef struct {
+ 	yaffs_ECCOther ecc;
+ } yaffs_PackedTags2;
+ 
+-void yaffs_PackTags2(yaffs_PackedTags2 * pt, const yaffs_ExtendedTags * t);
+-void yaffs_UnpackTags2(yaffs_ExtendedTags * t, yaffs_PackedTags2 * pt);
++/* Full packed tags with ECC, used for oob tags */
++void yaffs_PackTags2(yaffs_PackedTags2 *pt, const yaffs_ExtendedTags *t);
++void yaffs_UnpackTags2(yaffs_ExtendedTags *t, yaffs_PackedTags2 *pt);
++
++/* Only the tags part (no ECC for use with inband tags */
++void yaffs_PackTags2TagsPart(yaffs_PackedTags2TagsPart *pt, const yaffs_ExtendedTags *t);
++void yaffs_UnpackTags2TagsPart(yaffs_ExtendedTags *t, yaffs_PackedTags2TagsPart *pt);
+ #endif
+--- a/fs/yaffs2/yaffs_qsort.c
++++ b/fs/yaffs2/yaffs_qsort.c
+@@ -28,12 +28,12 @@
+  */
+ 
+ #include "yportenv.h"
+-//#include <linux/string.h>
++/* #include <linux/string.h> */
+ 
+ /*
+  * Qsort routine from Bentley & McIlroy's "Engineering a Sort Function".
+  */
+-#define swapcode(TYPE, parmi, parmj, n) { 		\
++#define swapcode(TYPE, parmi, parmj, n) do { 		\
+ 	long i = (n) / sizeof (TYPE); 			\
+ 	register TYPE *pi = (TYPE *) (parmi); 		\
+ 	register TYPE *pj = (TYPE *) (parmj); 		\
+@@ -41,28 +41,29 @@
+ 		register TYPE	t = *pi;		\
+ 		*pi++ = *pj;				\
+ 		*pj++ = t;				\
+-        } while (--i > 0);				\
+-}
++	} while (--i > 0);				\
++} while (0)
+ 
+ #define SWAPINIT(a, es) swaptype = ((char *)a - (char *)0) % sizeof(long) || \
+-	es % sizeof(long) ? 2 : es == sizeof(long)? 0 : 1;
++	es % sizeof(long) ? 2 : es == sizeof(long) ? 0 : 1;
+ 
+ static __inline void
+ swapfunc(char *a, char *b, int n, int swaptype)
+ {
+ 	if (swaptype <= 1)
+-		swapcode(long, a, b, n)
++		swapcode(long, a, b, n);
+ 	else
+-		swapcode(char, a, b, n)
++		swapcode(char, a, b, n);
+ }
+ 
+-#define swap(a, b)					\
++#define yswap(a, b) do {					\
+ 	if (swaptype == 0) {				\
+ 		long t = *(long *)(a);			\
+ 		*(long *)(a) = *(long *)(b);		\
+ 		*(long *)(b) = t;			\
+ 	} else						\
+-		swapfunc(a, b, es, swaptype)
++		swapfunc(a, b, es, swaptype);		\
++} while (0)
+ 
+ #define vecswap(a, b, n) 	if ((n) > 0) swapfunc(a, b, n, swaptype)
+ 
+@@ -70,12 +71,12 @@ static __inline char *
+ med3(char *a, char *b, char *c, int (*cmp)(const void *, const void *))
+ {
+ 	return cmp(a, b) < 0 ?
+-	       (cmp(b, c) < 0 ? b : (cmp(a, c) < 0 ? c : a ))
+-              :(cmp(b, c) > 0 ? b : (cmp(a, c) < 0 ? a : c ));
++		(cmp(b, c) < 0 ? b : (cmp(a, c) < 0 ? c : a))
++		: (cmp(b, c) > 0 ? b : (cmp(a, c) < 0 ? a : c));
+ }
+ 
+ #ifndef min
+-#define min(a,b) (((a) < (b)) ? (a) : (b))
++#define min(a, b) (((a) < (b)) ? (a) : (b))
+ #endif
+ 
+ void
+@@ -92,7 +93,7 @@ loop:	SWAPINIT(a, es);
+ 		for (pm = (char *)a + es; pm < (char *) a + n * es; pm += es)
+ 			for (pl = pm; pl > (char *) a && cmp(pl - es, pl) > 0;
+ 			     pl -= es)
+-				swap(pl, pl - es);
++				yswap(pl, pl - es);
+ 		return;
+ 	}
+ 	pm = (char *)a + (n / 2) * es;
+@@ -107,7 +108,7 @@ loop:	SWAPINIT(a, es);
+ 		}
+ 		pm = med3(pl, pm, pn, cmp);
+ 	}
+-	swap(a, pm);
++	yswap(a, pm);
+ 	pa = pb = (char *)a + es;
+ 
+ 	pc = pd = (char *)a + (n - 1) * es;
+@@ -115,7 +116,7 @@ loop:	SWAPINIT(a, es);
+ 		while (pb <= pc && (r = cmp(pb, a)) <= 0) {
+ 			if (r == 0) {
+ 				swap_cnt = 1;
+-				swap(pa, pb);
++				yswap(pa, pb);
+ 				pa += es;
+ 			}
+ 			pb += es;
+@@ -123,14 +124,14 @@ loop:	SWAPINIT(a, es);
+ 		while (pb <= pc && (r = cmp(pc, a)) >= 0) {
+ 			if (r == 0) {
+ 				swap_cnt = 1;
+-				swap(pc, pd);
++				yswap(pc, pd);
+ 				pd -= es;
+ 			}
+ 			pc -= es;
+ 		}
+ 		if (pb > pc)
+ 			break;
+-		swap(pb, pc);
++		yswap(pb, pc);
+ 		swap_cnt = 1;
+ 		pb += es;
+ 		pc -= es;
+@@ -139,7 +140,7 @@ loop:	SWAPINIT(a, es);
+ 		for (pm = (char *) a + es; pm < (char *) a + n * es; pm += es)
+ 			for (pl = pm; pl > (char *) a && cmp(pl - es, pl) > 0;
+ 			     pl -= es)
+-				swap(pl, pl - es);
++				yswap(pl, pl - es);
+ 		return;
+ 	}
+ 
+@@ -148,9 +149,11 @@ loop:	SWAPINIT(a, es);
+ 	vecswap(a, pb - r, r);
+ 	r = min((long)(pd - pc), (long)(pn - pd - es));
+ 	vecswap(pb, pn - r, r);
+-	if ((r = pb - pa) > es)
++	r = pb - pa;
++	if (r > es)
+ 		yaffs_qsort(a, r / es, es, cmp);
+-	if ((r = pd - pc) > es) {
++	r = pd - pc;
++	if (r > es) {
+ 		/* Iterate rather than recurse to save stack space */
+ 		a = pn - r;
+ 		n = r / es;
+--- a/fs/yaffs2/yaffs_qsort.h
++++ b/fs/yaffs2/yaffs_qsort.h
+@@ -17,7 +17,7 @@
+ #ifndef __YAFFS_QSORT_H__
+ #define __YAFFS_QSORT_H__
+ 
+-extern void yaffs_qsort (void *const base, size_t total_elems, size_t size,
+-                   int (*cmp)(const void *, const void *));
++extern void yaffs_qsort(void *const base, size_t total_elems, size_t size,
++			int (*cmp)(const void *, const void *));
+ 
+ #endif
+--- a/fs/yaffs2/yaffs_tagscompat.c
++++ b/fs/yaffs2/yaffs_tagscompat.c
+@@ -14,16 +14,17 @@
+ #include "yaffs_guts.h"
+ #include "yaffs_tagscompat.h"
+ #include "yaffs_ecc.h"
++#include "yaffs_getblockinfo.h"
+ 
+-static void yaffs_HandleReadDataError(yaffs_Device * dev, int chunkInNAND);
++static void yaffs_HandleReadDataError(yaffs_Device *dev, int chunkInNAND);
+ #ifdef NOTYET
+-static void yaffs_CheckWrittenBlock(yaffs_Device * dev, int chunkInNAND);
+-static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+-				     const __u8 * data,
+-				     const yaffs_Spare * spare);
+-static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+-				    const yaffs_Spare * spare);
+-static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND);
++static void yaffs_CheckWrittenBlock(yaffs_Device *dev, int chunkInNAND);
++static void yaffs_HandleWriteChunkOk(yaffs_Device *dev, int chunkInNAND,
++				     const __u8 *data,
++				     const yaffs_Spare *spare);
++static void yaffs_HandleUpdateChunk(yaffs_Device *dev, int chunkInNAND,
++				    const yaffs_Spare *spare);
++static void yaffs_HandleWriteChunkError(yaffs_Device *dev, int chunkInNAND);
+ #endif
+ 
+ static const char yaffs_countBitsTable[256] = {
+@@ -54,13 +55,13 @@ int yaffs_CountBits(__u8 x)
+ 
+ /********** Tags ECC calculations  *********/
+ 
+-void yaffs_CalcECC(const __u8 * data, yaffs_Spare * spare)
++void yaffs_CalcECC(const __u8 *data, yaffs_Spare *spare)
+ {
+ 	yaffs_ECCCalculate(data, spare->ecc1);
+ 	yaffs_ECCCalculate(&data[256], spare->ecc2);
+ }
+ 
+-void yaffs_CalcTagsECC(yaffs_Tags * tags)
++void yaffs_CalcTagsECC(yaffs_Tags *tags)
+ {
+ 	/* Calculate an ecc */
+ 
+@@ -74,9 +75,8 @@ void yaffs_CalcTagsECC(yaffs_Tags * tags
+ 	for (i = 0; i < 8; i++) {
+ 		for (j = 1; j & 0xff; j <<= 1) {
+ 			bit++;
+-			if (b[i] & j) {
++			if (b[i] & j)
+ 				ecc ^= bit;
+-			}
+ 		}
+ 	}
+ 
+@@ -84,7 +84,7 @@ void yaffs_CalcTagsECC(yaffs_Tags * tags
+ 
+ }
+ 
+-int yaffs_CheckECCOnTags(yaffs_Tags * tags)
++int yaffs_CheckECCOnTags(yaffs_Tags *tags)
+ {
+ 	unsigned ecc = tags->ecc;
+ 
+@@ -115,8 +115,8 @@ int yaffs_CheckECCOnTags(yaffs_Tags * ta
+ 
+ /********** Tags **********/
+ 
+-static void yaffs_LoadTagsIntoSpare(yaffs_Spare * sparePtr,
+-				    yaffs_Tags * tagsPtr)
++static void yaffs_LoadTagsIntoSpare(yaffs_Spare *sparePtr,
++				yaffs_Tags *tagsPtr)
+ {
+ 	yaffs_TagsUnion *tu = (yaffs_TagsUnion *) tagsPtr;
+ 
+@@ -132,8 +132,8 @@ static void yaffs_LoadTagsIntoSpare(yaff
+ 	sparePtr->tagByte7 = tu->asBytes[7];
+ }
+ 
+-static void yaffs_GetTagsFromSpare(yaffs_Device * dev, yaffs_Spare * sparePtr,
+-				   yaffs_Tags * tagsPtr)
++static void yaffs_GetTagsFromSpare(yaffs_Device *dev, yaffs_Spare *sparePtr,
++				yaffs_Tags *tagsPtr)
+ {
+ 	yaffs_TagsUnion *tu = (yaffs_TagsUnion *) tagsPtr;
+ 	int result;
+@@ -148,21 +148,20 @@ static void yaffs_GetTagsFromSpare(yaffs
+ 	tu->asBytes[7] = sparePtr->tagByte7;
+ 
+ 	result = yaffs_CheckECCOnTags(tagsPtr);
+-	if (result > 0) {
++	if (result > 0)
+ 		dev->tagsEccFixed++;
+-	} else if (result < 0) {
++	else if (result < 0)
+ 		dev->tagsEccUnfixed++;
+-	}
+ }
+ 
+-static void yaffs_SpareInitialise(yaffs_Spare * spare)
++static void yaffs_SpareInitialise(yaffs_Spare *spare)
+ {
+ 	memset(spare, 0xFF, sizeof(yaffs_Spare));
+ }
+ 
+ static int yaffs_WriteChunkToNAND(struct yaffs_DeviceStruct *dev,
+-				  int chunkInNAND, const __u8 * data,
+-				  yaffs_Spare * spare)
++				int chunkInNAND, const __u8 *data,
++				yaffs_Spare *spare)
+ {
+ 	if (chunkInNAND < dev->startBlock * dev->nChunksPerBlock) {
+ 		T(YAFFS_TRACE_ERROR,
+@@ -177,9 +176,9 @@ static int yaffs_WriteChunkToNAND(struct
+ 
+ static int yaffs_ReadChunkFromNAND(struct yaffs_DeviceStruct *dev,
+ 				   int chunkInNAND,
+-				   __u8 * data,
+-				   yaffs_Spare * spare,
+-				   yaffs_ECCResult * eccResult,
++				   __u8 *data,
++				   yaffs_Spare *spare,
++				   yaffs_ECCResult *eccResult,
+ 				   int doErrorCorrection)
+ {
+ 	int retVal;
+@@ -252,9 +251,11 @@ static int yaffs_ReadChunkFromNAND(struc
+ 		/* Must allocate enough memory for spare+2*sizeof(int) */
+ 		/* for ecc results from device. */
+ 		struct yaffs_NANDSpare nspare;
+-		retVal =
+-		    dev->readChunkFromNAND(dev, chunkInNAND, data,
+-					   (yaffs_Spare *) & nspare);
++
++		memset(&nspare, 0, sizeof(nspare));
++
++		retVal = dev->readChunkFromNAND(dev, chunkInNAND, data,
++					(yaffs_Spare *) &nspare);
+ 		memcpy(spare, &nspare, sizeof(yaffs_Spare));
+ 		if (data && doErrorCorrection) {
+ 			if (nspare.eccres1 > 0) {
+@@ -302,8 +303,7 @@ static int yaffs_ReadChunkFromNAND(struc
+ static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev,
+ 				  int chunkInNAND)
+ {
+-
+-	static int init = 0;
++	static int init;
+ 	static __u8 cmpbuf[YAFFS_BYTES_PER_CHUNK];
+ 	static __u8 data[YAFFS_BYTES_PER_CHUNK];
+ 	/* Might as well always allocate the larger size for */
+@@ -331,12 +331,12 @@ static int yaffs_CheckChunkErased(struct
+  * Functions for robustisizing
+  */
+ 
+-static void yaffs_HandleReadDataError(yaffs_Device * dev, int chunkInNAND)
++static void yaffs_HandleReadDataError(yaffs_Device *dev, int chunkInNAND)
+ {
+ 	int blockInNAND = chunkInNAND / dev->nChunksPerBlock;
+ 
+ 	/* Mark the block for retirement */
+-	yaffs_GetBlockInfo(dev, blockInNAND)->needsRetiring = 1;
++	yaffs_GetBlockInfo(dev, blockInNAND + dev->blockOffset)->needsRetiring = 1;
+ 	T(YAFFS_TRACE_ERROR | YAFFS_TRACE_BAD_BLOCKS,
+ 	  (TSTR("**>>Block %d marked for retirement" TENDSTR), blockInNAND));
+ 
+@@ -348,22 +348,22 @@ static void yaffs_HandleReadDataError(ya
+ }
+ 
+ #ifdef NOTYET
+-static void yaffs_CheckWrittenBlock(yaffs_Device * dev, int chunkInNAND)
++static void yaffs_CheckWrittenBlock(yaffs_Device *dev, int chunkInNAND)
+ {
+ }
+ 
+-static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+-				     const __u8 * data,
+-				     const yaffs_Spare * spare)
++static void yaffs_HandleWriteChunkOk(yaffs_Device *dev, int chunkInNAND,
++				     const __u8 *data,
++				     const yaffs_Spare *spare)
+ {
+ }
+ 
+-static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+-				    const yaffs_Spare * spare)
++static void yaffs_HandleUpdateChunk(yaffs_Device *dev, int chunkInNAND,
++				    const yaffs_Spare *spare)
+ {
+ }
+ 
+-static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND)
++static void yaffs_HandleWriteChunkError(yaffs_Device *dev, int chunkInNAND)
+ {
+ 	int blockInNAND = chunkInNAND / dev->nChunksPerBlock;
+ 
+@@ -373,8 +373,8 @@ static void yaffs_HandleWriteChunkError(
+ 	yaffs_DeleteChunk(dev, chunkInNAND, 1, __LINE__);
+ }
+ 
+-static int yaffs_VerifyCompare(const __u8 * d0, const __u8 * d1,
+-			       const yaffs_Spare * s0, const yaffs_Spare * s1)
++static int yaffs_VerifyCompare(const __u8 *d0, const __u8 *d1,
++			       const yaffs_Spare *s0, const yaffs_Spare *s1)
+ {
+ 
+ 	if (memcmp(d0, d1, YAFFS_BYTES_PER_CHUNK) != 0 ||
+@@ -398,28 +398,35 @@ static int yaffs_VerifyCompare(const __u
+ }
+ #endif				/* NOTYET */
+ 
+-int yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(yaffs_Device * dev,
+-						    int chunkInNAND,
+-						    const __u8 * data,
+-						    const yaffs_ExtendedTags *
+-						    eTags)
++int yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(yaffs_Device *dev,
++						int chunkInNAND,
++						const __u8 *data,
++						const yaffs_ExtendedTags *eTags)
+ {
+ 	yaffs_Spare spare;
+ 	yaffs_Tags tags;
+ 
+ 	yaffs_SpareInitialise(&spare);
+ 
+-	if (eTags->chunkDeleted) {
++	if (eTags->chunkDeleted)
+ 		spare.pageStatus = 0;
+-	} else {
++	else {
+ 		tags.objectId = eTags->objectId;
+ 		tags.chunkId = eTags->chunkId;
+-		tags.byteCount = eTags->byteCount;
++
++		tags.byteCountLSB = eTags->byteCount & 0x3ff;
++
++		if (dev->nDataBytesPerChunk >= 1024)
++			tags.byteCountMSB = (eTags->byteCount >> 10) & 3;
++		else
++			tags.byteCountMSB = 3;
++
++
+ 		tags.serialNumber = eTags->serialNumber;
+ 
+-		if (!dev->useNANDECC && data) {
++		if (!dev->useNANDECC && data)
+ 			yaffs_CalcECC(data, &spare);
+-		}
++
+ 		yaffs_LoadTagsIntoSpare(&spare, &tags);
+ 
+ 	}
+@@ -427,15 +434,15 @@ int yaffs_TagsCompatabilityWriteChunkWit
+ 	return yaffs_WriteChunkToNAND(dev, chunkInNAND, data, &spare);
+ }
+ 
+-int yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(yaffs_Device * dev,
++int yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(yaffs_Device *dev,
+ 						     int chunkInNAND,
+-						     __u8 * data,
+-						     yaffs_ExtendedTags * eTags)
++						     __u8 *data,
++						     yaffs_ExtendedTags *eTags)
+ {
+ 
+ 	yaffs_Spare spare;
+ 	yaffs_Tags tags;
+-	yaffs_ECCResult eccResult;
++	yaffs_ECCResult eccResult = YAFFS_ECC_RESULT_UNKNOWN;
+ 
+ 	static yaffs_Spare spareFF;
+ 	static int init;
+@@ -466,7 +473,11 @@ int yaffs_TagsCompatabilityReadChunkWith
+ 
+ 				eTags->objectId = tags.objectId;
+ 				eTags->chunkId = tags.chunkId;
+-				eTags->byteCount = tags.byteCount;
++				eTags->byteCount = tags.byteCountLSB;
++
++				if (dev->nDataBytesPerChunk >= 1024)
++					eTags->byteCount |= (((unsigned) tags.byteCountMSB) << 10);
++
+ 				eTags->serialNumber = tags.serialNumber;
+ 			}
+ 		}
+@@ -497,9 +508,9 @@ int yaffs_TagsCompatabilityMarkNANDBlock
+ }
+ 
+ int yaffs_TagsCompatabilityQueryNANDBlock(struct yaffs_DeviceStruct *dev,
+-					  int blockNo, yaffs_BlockState *
+-					  state,
+-					  int *sequenceNumber)
++					  int blockNo,
++					  yaffs_BlockState *state,
++					  __u32 *sequenceNumber)
+ {
+ 
+ 	yaffs_Spare spare0, spare1;
+--- a/fs/yaffs2/yaffs_tagscompat.h
++++ b/fs/yaffs2/yaffs_tagscompat.h
+@@ -17,24 +17,23 @@
+ #define __YAFFS_TAGSCOMPAT_H__
+ 
+ #include "yaffs_guts.h"
+-int yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(yaffs_Device * dev,
+-						    int chunkInNAND,
+-						    const __u8 * data,
+-						    const yaffs_ExtendedTags *
+-						    tags);
+-int yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(yaffs_Device * dev,
+-						     int chunkInNAND,
+-						     __u8 * data,
+-						     yaffs_ExtendedTags *
+-						     tags);
++int yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(yaffs_Device *dev,
++						int chunkInNAND,
++						const __u8 *data,
++						const yaffs_ExtendedTags *tags);
++int yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(yaffs_Device *dev,
++						int chunkInNAND,
++						__u8 *data,
++						yaffs_ExtendedTags *tags);
+ int yaffs_TagsCompatabilityMarkNANDBlockBad(struct yaffs_DeviceStruct *dev,
+ 					    int blockNo);
+ int yaffs_TagsCompatabilityQueryNANDBlock(struct yaffs_DeviceStruct *dev,
+-					  int blockNo, yaffs_BlockState *
+-					  state, int *sequenceNumber);
++					  int blockNo,
++					  yaffs_BlockState *state,
++					  __u32 *sequenceNumber);
+ 
+-void yaffs_CalcTagsECC(yaffs_Tags * tags);
+-int yaffs_CheckECCOnTags(yaffs_Tags * tags);
++void yaffs_CalcTagsECC(yaffs_Tags *tags);
++int yaffs_CheckECCOnTags(yaffs_Tags *tags);
+ int yaffs_CountBits(__u8 byte);
+ 
+ #endif
+--- a/fs/yaffs2/yaffs_tagsvalidity.c
++++ b/fs/yaffs2/yaffs_tagsvalidity.c
+@@ -13,14 +13,14 @@
+ 
+ #include "yaffs_tagsvalidity.h"
+ 
+-void yaffs_InitialiseTags(yaffs_ExtendedTags * tags)
++void yaffs_InitialiseTags(yaffs_ExtendedTags *tags)
+ {
+ 	memset(tags, 0, sizeof(yaffs_ExtendedTags));
+ 	tags->validMarker0 = 0xAAAAAAAA;
+ 	tags->validMarker1 = 0x55555555;
+ }
+ 
+-int yaffs_ValidateTags(yaffs_ExtendedTags * tags)
++int yaffs_ValidateTags(yaffs_ExtendedTags *tags)
+ {
+ 	return (tags->validMarker0 == 0xAAAAAAAA &&
+ 		tags->validMarker1 == 0x55555555);
+--- a/fs/yaffs2/yaffs_tagsvalidity.h
++++ b/fs/yaffs2/yaffs_tagsvalidity.h
+@@ -19,6 +19,6 @@
+ 
+ #include "yaffs_guts.h"
+ 
+-void yaffs_InitialiseTags(yaffs_ExtendedTags * tags);
+-int yaffs_ValidateTags(yaffs_ExtendedTags * tags);
++void yaffs_InitialiseTags(yaffs_ExtendedTags *tags);
++int yaffs_ValidateTags(yaffs_ExtendedTags *tags);
+ #endif
+--- a/fs/yaffs2/yportenv.h
++++ b/fs/yaffs2/yportenv.h
+@@ -17,17 +17,28 @@
+ #ifndef __YPORTENV_H__
+ #define __YPORTENV_H__
+ 
++/*
++ * Define the MTD version in terms of Linux Kernel versions
++ * This allows yaffs to be used independantly of the kernel
++ * as well as with it.
++ */
++
++#define MTD_VERSION(a, b, c) (((a) << 16) + ((b) << 8) + (c))
++
+ #if defined CONFIG_YAFFS_WINCE
+ 
+ #include "ywinceenv.h"
+ 
+-#elif  defined __KERNEL__
++#elif defined __KERNEL__
+ 
+ #include "moduleconfig.h"
+ 
+ /* Linux kernel */
++
+ #include <linux/version.h>
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19))
++#define MTD_VERSION_CODE LINUX_VERSION_CODE
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 19))
+ #include <linux/config.h>
+ #endif
+ #include <linux/kernel.h>
+@@ -40,12 +51,13 @@
+ #define YCHAR char
+ #define YUCHAR unsigned char
+ #define _Y(x)     x
+-#define yaffs_strcpy(a,b)    strcpy(a,b)
+-#define yaffs_strncpy(a,b,c) strncpy(a,b,c)
+-#define yaffs_strncmp(a,b,c) strncmp(a,b,c)
+-#define yaffs_strlen(s)	     strlen(s)
+-#define yaffs_sprintf	     sprintf
+-#define yaffs_toupper(a)     toupper(a)
++#define yaffs_strcat(a, b)     strcat(a, b)
++#define yaffs_strcpy(a, b)     strcpy(a, b)
++#define yaffs_strncpy(a, b, c) strncpy(a, b, c)
++#define yaffs_strncmp(a, b, c) strncmp(a, b, c)
++#define yaffs_strlen(s)	       strlen(s)
++#define yaffs_sprintf	       sprintf
++#define yaffs_toupper(a)       toupper(a)
+ 
+ #define Y_INLINE inline
+ 
+@@ -53,19 +65,19 @@
+ #define YAFFS_LOSTNFOUND_PREFIX		"obj"
+ 
+ /* #define YPRINTF(x) printk x */
+-#define YMALLOC(x) kmalloc(x,GFP_KERNEL)
++#define YMALLOC(x) kmalloc(x, GFP_NOFS)
+ #define YFREE(x)   kfree(x)
+ #define YMALLOC_ALT(x) vmalloc(x)
+ #define YFREE_ALT(x)   vfree(x)
+ #define YMALLOC_DMA(x) YMALLOC(x)
+ 
+-// KR - added for use in scan so processes aren't blocked indefinitely.
++/* KR - added for use in scan so processes aren't blocked indefinitely. */
+ #define YYIELD() schedule()
+ 
+ #define YAFFS_ROOT_MODE			0666
+ #define YAFFS_LOSTNFOUND_MODE		0666
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ #define Y_CURRENT_TIME CURRENT_TIME.tv_sec
+ #define Y_TIME_CONVERT(x) (x).tv_sec
+ #else
+@@ -73,11 +85,12 @@
+ #define Y_TIME_CONVERT(x) (x)
+ #endif
+ 
+-#define yaffs_SumCompare(x,y) ((x) == (y))
+-#define yaffs_strcmp(a,b) strcmp(a,b)
++#define yaffs_SumCompare(x, y) ((x) == (y))
++#define yaffs_strcmp(a, b) strcmp(a, b)
+ 
+ #define TENDSTR "\n"
+ #define TSTR(x) KERN_WARNING x
++#define TCONT(x) x
+ #define TOUT(p) printk p
+ 
+ #define yaffs_trace(mask, fmt, args...) \
+@@ -90,6 +103,8 @@
+ 
+ #elif defined CONFIG_YAFFS_DIRECT
+ 
++#define MTD_VERSION_CODE MTD_VERSION(2, 6, 22)
++
+ /* Direct interface */
+ #include "ydirectenv.h"
+ 
+@@ -111,11 +126,12 @@
+ #define YCHAR char
+ #define YUCHAR unsigned char
+ #define _Y(x)     x
+-#define yaffs_strcpy(a,b)    strcpy(a,b)
+-#define yaffs_strncpy(a,b,c) strncpy(a,b,c)
+-#define yaffs_strlen(s)	     strlen(s)
+-#define yaffs_sprintf	     sprintf
+-#define yaffs_toupper(a)     toupper(a)
++#define yaffs_strcat(a, b)     strcat(a, b)
++#define yaffs_strcpy(a, b)     strcpy(a, b)
++#define yaffs_strncpy(a, b, c) strncpy(a, b, c)
++#define yaffs_strlen(s)	       strlen(s)
++#define yaffs_sprintf	       sprintf
++#define yaffs_toupper(a)       toupper(a)
+ 
+ #define Y_INLINE inline
+ 
+@@ -133,8 +149,8 @@
+ #define YAFFS_ROOT_MODE				0666
+ #define YAFFS_LOSTNFOUND_MODE		0666
+ 
+-#define yaffs_SumCompare(x,y) ((x) == (y))
+-#define yaffs_strcmp(a,b) strcmp(a,b)
++#define yaffs_SumCompare(x, y) ((x) == (y))
++#define yaffs_strcmp(a, b) strcmp(a, b)
+ 
+ #else
+ /* Should have specified a configuration type */
+@@ -178,10 +194,10 @@ extern unsigned int yaffs_wr_attempts;
+ #define YAFFS_TRACE_ALWAYS		0xF0000000
+ 
+ 
+-#define T(mask,p) do{ if((mask) & (yaffs_traceMask | YAFFS_TRACE_ALWAYS)) TOUT(p);} while(0)
++#define T(mask, p) do { if ((mask) & (yaffs_traceMask | YAFFS_TRACE_ALWAYS)) TOUT(p); } while (0)
+ 
+-#ifndef CONFIG_YAFFS_WINCE
+-#define YBUG() T(YAFFS_TRACE_BUG,(TSTR("==>> yaffs bug: " __FILE__ " %d" TENDSTR),__LINE__))
++#ifndef YBUG
++#define YBUG() do {T(YAFFS_TRACE_BUG, (TSTR("==>> yaffs bug: " __FILE__ " %d" TENDSTR), __LINE__)); } while (0)
+ #endif
+ 
+ #endif
diff --git a/target/linux/generic/patches-2.6.33/600-phy_extension.patch b/target/linux/generic/patches-2.6.33/600-phy_extension.patch
new file mode 100644
index 0000000000..966a812c0f
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/600-phy_extension.patch
@@ -0,0 +1,81 @@
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -299,6 +299,50 @@ int phy_ethtool_gset(struct phy_device *
+ }
+ EXPORT_SYMBOL(phy_ethtool_gset);
+ 
++int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr)
++{
++	u32 cmd;
++	int tmp;
++	struct ethtool_cmd ecmd = { ETHTOOL_GSET };
++	struct ethtool_value edata = { ETHTOOL_GLINK };
++
++	if (get_user(cmd, (u32 *) useraddr))
++		return -EFAULT;
++
++	switch (cmd) {
++	case ETHTOOL_GSET:
++		phy_ethtool_gset(phydev, &ecmd);
++		if (copy_to_user(useraddr, &ecmd, sizeof(ecmd)))
++			return -EFAULT;
++		return 0;
++
++	case ETHTOOL_SSET:
++		if (copy_from_user(&ecmd, useraddr, sizeof(ecmd)))
++			return -EFAULT;
++		return phy_ethtool_sset(phydev, &ecmd);
++
++	case ETHTOOL_NWAY_RST:
++		/* if autoneg is off, it's an error */
++		tmp = phy_read(phydev, MII_BMCR);
++		if (tmp & BMCR_ANENABLE) {
++			tmp |= (BMCR_ANRESTART);
++			phy_write(phydev, MII_BMCR, tmp);
++			return 0;
++		}
++		return -EINVAL;
++
++	case ETHTOOL_GLINK:
++		edata.data = (phy_read(phydev,
++				MII_BMSR) & BMSR_LSTATUS) ? 1 : 0;
++		if (copy_to_user(useraddr, &edata, sizeof(edata)))
++			return -EFAULT;
++		return 0;
++	}
++
++	return -EOPNOTSUPP;
++}
++EXPORT_SYMBOL(phy_ethtool_ioctl);
++
+ /**
+  * phy_mii_ioctl - generic PHY MII ioctl interface
+  * @phydev: the phy_device struct
+@@ -352,7 +396,7 @@ int phy_mii_ioctl(struct phy_device *phy
+ 		}
+ 
+ 		phy_write(phydev, mii_data->reg_num, val);
+-		
++
+ 		if (mii_data->reg_num == MII_BMCR &&
+ 		    val & BMCR_RESET &&
+ 		    phydev->drv->config_init) {
+@@ -466,7 +510,7 @@ static void phy_force_reduction(struct p
+ 	int idx;
+ 
+ 	idx = phy_find_setting(phydev->speed, phydev->duplex);
+-	
++
+ 	idx++;
+ 
+ 	idx = phy_find_valid(idx, phydev->supported);
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -491,6 +491,7 @@ void phy_start_machine(struct phy_device
+ void phy_stop_machine(struct phy_device *phydev);
+ int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
+ int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
++int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr);
+ int phy_mii_ioctl(struct phy_device *phydev,
+ 		struct mii_ioctl_data *mii_data, int cmd);
+ int phy_start_interrupts(struct phy_device *phydev);
diff --git a/target/linux/generic/patches-2.6.33/601-phy-add-aneg-done-function.patch b/target/linux/generic/patches-2.6.33/601-phy-add-aneg-done-function.patch
new file mode 100644
index 0000000000..15a5e7ea6d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/601-phy-add-aneg-done-function.patch
@@ -0,0 +1,45 @@
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -379,9 +379,18 @@ struct phy_driver {
+ 	 */
+ 	int (*config_aneg)(struct phy_device *phydev);
+ 
++	/* Determine if autonegotiation is done */
++	int (*aneg_done)(struct phy_device *phydev);
++
+ 	/* Determines the negotiated speed and duplex */
+ 	int (*read_status)(struct phy_device *phydev);
+ 
++	/* 
++	 * Update the value in phydev->link to reflect the 
++	 * current link value
++	 */
++	int (*update_link)(struct phy_device *phydev);
++
+ 	/* Clears any pending interrupts */
+ 	int (*ack_interrupt)(struct phy_device *phydev);
+ 
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -682,6 +682,9 @@ int genphy_update_link(struct phy_device
+ {
+ 	int status;
+ 
++	if (phydev->drv->update_link)
++		return phydev->drv->update_link(phydev);
++
+ 	/* Do a fake read */
+ 	status = phy_read(phydev, MII_BMSR);
+ 
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -107,6 +107,9 @@ static inline int phy_aneg_done(struct p
+ {
+ 	int retval;
+ 
++	if (phydev->drv->aneg_done)
++		return phydev->drv->aneg_done(phydev);
++
+ 	retval = phy_read(phydev, MII_BMSR);
+ 
+ 	return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE);
diff --git a/target/linux/generic/patches-2.6.33/620-phy_adm6996.patch b/target/linux/generic/patches-2.6.33/620-phy_adm6996.patch
new file mode 100644
index 0000000000..b3e469a8d6
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/620-phy_adm6996.patch
@@ -0,0 +1,24 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -88,6 +88,11 @@ config LSI_ET1011C_PHY
+ 	---help---
+ 	  Supports the LSI ET1011C PHY.
+ 
++config ADM6996_PHY
++	tristate "Driver for ADM6996 switches"
++	---help---
++	  Currently supports the ADM6996F switch
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -13,6 +13,7 @@ obj-$(CONFIG_VITESSE_PHY)	+= vitesse.o
+ obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
+ obj-$(CONFIG_BCM63XX_PHY)	+= bcm63xx.o
+ obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
++obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
diff --git a/target/linux/generic/patches-2.6.33/630-phy_packets.patch b/target/linux/generic/patches-2.6.33/630-phy_packets.patch
new file mode 100644
index 0000000000..9c0f24aa17
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/630-phy_packets.patch
@@ -0,0 +1,63 @@
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -146,6 +146,18 @@ int phy_scan_fixups(struct phy_device *p
+ }
+ EXPORT_SYMBOL(phy_scan_fixups);
+ 
++static int generic_receive_skb(struct sk_buff *skb)
++{
++	skb->protocol = eth_type_trans(skb, skb->dev);
++	return netif_receive_skb(skb);
++}
++
++static int generic_rx(struct sk_buff *skb)
++{
++	skb->protocol = eth_type_trans(skb, skb->dev);
++	return netif_rx(skb);
++}
++
+ struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
+ {
+ 	struct phy_device *dev;
+@@ -175,6 +187,8 @@ struct phy_device* phy_device_create(str
+ 	dev_set_name(&dev->dev, PHY_ID_FMT, bus->id, addr);
+ 
+ 	dev->state = PHY_DOWN;
++	dev->netif_receive_skb = &generic_receive_skb;
++	dev->netif_rx = &generic_rx;
+ 
+ 	mutex_init(&dev->lock);
+ 	INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine);
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -325,6 +325,20 @@ struct phy_device {
+ 	void (*adjust_link)(struct net_device *dev);
+ 
+ 	void (*adjust_state)(struct net_device *dev);
++
++	/*
++	 * By default these point to the original functions
++	 * with the same name. adding them to the phy_device
++	 * allows the phy driver to override them for packet
++	 * mangling if the ethernet driver supports it
++	 * This is required to support some really horrible
++	 * switches such as the Marvell 88E6060
++	 */
++	int (*netif_receive_skb)(struct sk_buff *skb);
++	int (*netif_rx)(struct sk_buff *skb);
++
++	/* alignment offset for packets */
++	int pkt_align;
+ };
+ #define to_phy_device(d) container_of(d, struct phy_device, dev)
+ 
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -844,6 +844,7 @@ struct net_device {
+ 	void			*ax25_ptr;	/* AX.25 specific data */
+ 	struct wireless_dev	*ieee80211_ptr;	/* IEEE 802.11 specific data,
+ 						   assign before registering */
++	void			*phy_ptr; /* PHY device specific data */
+ 
+ /*
+  * Cache line mostly used on receive path (including eth_type_trans())
diff --git a/target/linux/generic/patches-2.6.33/650-swconfig.patch b/target/linux/generic/patches-2.6.33/650-swconfig.patch
new file mode 100644
index 0000000000..6825037ce9
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/650-swconfig.patch
@@ -0,0 +1,25 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -13,6 +13,12 @@ menuconfig PHYLIB
+ 
+ if PHYLIB
+ 
++config SWCONFIG
++	tristate "Switch configuration API"
++	---help---
++	  Switch configuration API using netlink. This allows
++	  you to configure the VLAN features of certain switches.
++
+ comment "MII PHY device drivers"
+ 
+ config MARVELL_PHY
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -3,6 +3,7 @@
+ libphy-objs			:= phy.o phy_device.o mdio_bus.o
+ 
+ obj-$(CONFIG_PHYLIB)		+= libphy.o
++obj-$(CONFIG_SWCONFIG)		+= swconfig.o
+ obj-$(CONFIG_MARVELL_PHY)	+= marvell.o
+ obj-$(CONFIG_DAVICOM_PHY)	+= davicom.o
+ obj-$(CONFIG_CICADA_PHY)	+= cicada.o
diff --git a/target/linux/generic/patches-2.6.33/651-swconfig-2.6.32-fix.patch b/target/linux/generic/patches-2.6.33/651-swconfig-2.6.32-fix.patch
new file mode 100644
index 0000000000..b86e259c8d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/651-swconfig-2.6.32-fix.patch
@@ -0,0 +1,29 @@
+--- a/drivers/net/phy/swconfig.c
++++ b/drivers/net/phy/swconfig.c
+@@ -335,7 +335,7 @@ swconfig_send_multipart(struct swconfig_
+ 			if (cb->close(cb, arg) < 0)
+ 				goto error;
+ 		}
+-		err = genlmsg_unicast(cb->msg, info->snd_pid);
++		err = genlmsg_reply(cb->msg, info);
+ 		cb->msg = NULL;
+ 		if (err < 0)
+ 			goto error;
+@@ -419,7 +419,7 @@ swconfig_list_attrs(struct sk_buff *skb,
+ 	if (!cb.msg)
+ 		return 0;
+ 
+-	return genlmsg_unicast(cb.msg, info->snd_pid);
++	return genlmsg_reply(cb.msg, info);
+ 
+ error:
+ 	if (cb.msg)
+@@ -732,7 +732,7 @@ swconfig_get_attr(struct sk_buff *skb, s
+ 		goto nla_put_failure;
+ 
+ 	swconfig_put_dev(dev);
+-	return genlmsg_unicast(msg, info->snd_pid);
++	return genlmsg_reply(msg, info);
+ 
+ nla_put_failure:
+ 	if (msg)
diff --git a/target/linux/generic/patches-2.6.33/660-phy_mvswitch.patch b/target/linux/generic/patches-2.6.33/660-phy_mvswitch.patch
new file mode 100644
index 0000000000..36551fd570
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/660-phy_mvswitch.patch
@@ -0,0 +1,22 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -99,6 +99,9 @@ config ADM6996_PHY
+ 	---help---
+ 	  Currently supports the ADM6996F switch
+ 
++config MVSWITCH_PHY
++	tristate "Driver for Marvell 88E6060 switches"
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -15,6 +15,7 @@ obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
+ obj-$(CONFIG_BCM63XX_PHY)	+= bcm63xx.o
+ obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
+ obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
++obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
diff --git a/target/linux/generic/patches-2.6.33/670-phy_ip175c.patch b/target/linux/generic/patches-2.6.33/670-phy_ip175c.patch
new file mode 100644
index 0000000000..a9452b3bbe
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/670-phy_ip175c.patch
@@ -0,0 +1,23 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -102,6 +102,10 @@ config ADM6996_PHY
+ config MVSWITCH_PHY
+ 	tristate "Driver for Marvell 88E6060 switches"
+ 
++config IP17XX_PHY
++	tristate "Driver for IC+ IP17xx switches"
++	select SWCONFIG
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -16,6 +16,7 @@ obj-$(CONFIG_BCM63XX_PHY)	+= bcm63xx.o
+ obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
+ obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
+ obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
++obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
diff --git a/target/linux/generic/patches-2.6.33/680-phy_ar8216.patch b/target/linux/generic/patches-2.6.33/680-phy_ar8216.patch
new file mode 100644
index 0000000000..0566600a0e
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/680-phy_ar8216.patch
@@ -0,0 +1,23 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -106,6 +106,10 @@ config IP17XX_PHY
+ 	tristate "Driver for IC+ IP17xx switches"
+ 	select SWCONFIG
+ 
++config AR8216_PHY
++	tristate "Driver for Atheros AR8216 switches"
++	select SWCONFIG
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -18,6 +18,7 @@ obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
+ obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
+ obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
++obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
diff --git a/target/linux/generic/patches-2.6.33/690-phy_rtl8306.patch b/target/linux/generic/patches-2.6.33/690-phy_rtl8306.patch
new file mode 100644
index 0000000000..36ce9dfce7
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/690-phy_rtl8306.patch
@@ -0,0 +1,23 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -110,6 +110,10 @@ config AR8216_PHY
+ 	tristate "Driver for Atheros AR8216 switches"
+ 	select SWCONFIG
+ 
++config RTL8306_PHY
++	tristate "Driver for Realtek RTL8306S switches"
++	select SWCONFIG
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -19,6 +19,7 @@ obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
+ obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
++obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
diff --git a/target/linux/generic/patches-2.6.33/691-phy_rtl8366.patch b/target/linux/generic/patches-2.6.33/691-phy_rtl8366.patch
new file mode 100644
index 0000000000..80f4782c53
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/691-phy_rtl8366.patch
@@ -0,0 +1,44 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -152,4 +152,29 @@ config MDIO_OCTEON
+ 
+ 	  If in doubt, say Y.
+ 
++config RTL8366_SMI
++	tristate "Driver for the RTL8366 SMI interface"
++	depends on GENERIC_GPIO
++	---help---
++	  This module implements the SMI interface protocol which is used
++	  by some RTL8366 ethernet switch devices via the generic GPIO API.
++
++if RTL8366_SMI
++
++config RTL8366S_PHY
++	tristate "Driver for the Realtek RTL8366S switch"
++	select SWCONFIG
++
++config RTL8366RB_PHY
++	tristate "Driver for the Realtek RTL8366RB switch"
++	select SWCONFIG
++
++config RTL8366S_PHY_DEBUG_FS
++	bool "RTL8366 switch driver DEBUG_FS support"
++	depends on RTL8366S_PHY || RTL8366RB_PHY
++	depends on DEBUG_FS
++	default n
++
++endif # RTL8366_SMI
++
+ endif # PHYLIB
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -20,6 +20,9 @@ obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
+ obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
++obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o
++obj-$(CONFIG_RTL8366S_PHY)	+= rtl8366s.o
++obj-$(CONFIG_RTL8366RB_PHY)	+= rtl8366rb.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
diff --git a/target/linux/generic/patches-2.6.33/700-rtc7301.patch b/target/linux/generic/patches-2.6.33/700-rtc7301.patch
new file mode 100644
index 0000000000..dae807f40f
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/700-rtc7301.patch
@@ -0,0 +1,250 @@
+--- a/drivers/rtc/Kconfig
++++ b/drivers/rtc/Kconfig
+@@ -608,6 +608,15 @@ config RTC_DRV_NUC900
+ 	  If you say yes here you get support for the RTC subsystem of the
+ 	  NUC910/NUC920 used in embedded systems.
+ 
++config RTC_DRV_RTC7301
++	tristate "Epson RTC-7301 SF/DG"
++	help
++	  If you say Y here you will get support for the
++	  Epson RTC-7301 SF/DG RTC chips.
++
++	  This driver can also be built as a module. If so, the module
++	  will be called rtc-7301.
++
+ comment "on-CPU RTC drivers"
+ 
+ config RTC_DRV_OMAP
+--- a/drivers/rtc/Makefile
++++ b/drivers/rtc/Makefile
+@@ -72,6 +72,7 @@ obj-$(CONFIG_RTC_DRV_RP5C01)	+= rtc-rp5c
+ obj-$(CONFIG_RTC_DRV_RS5C313)	+= rtc-rs5c313.o
+ obj-$(CONFIG_RTC_DRV_RS5C348)	+= rtc-rs5c348.o
+ obj-$(CONFIG_RTC_DRV_RS5C372)	+= rtc-rs5c372.o
++obj-$(CONFIG_RTC_DRV_RTC7301)	+= rtc-rtc7301.o
+ obj-$(CONFIG_RTC_DRV_RX8025)	+= rtc-rx8025.o
+ obj-$(CONFIG_RTC_DRV_RX8581)	+= rtc-rx8581.o
+ obj-$(CONFIG_RTC_DRV_S35390A)	+= rtc-s35390a.o
+--- /dev/null
++++ b/drivers/rtc/rtc-rtc7301.c
+@@ -0,0 +1,219 @@
++/*
++ * Driver for Epson RTC-7301SF/DG
++ *
++ * Copyright (C) 2009 Jose Vasconcellos
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/rtc.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/delay.h>
++#include <linux/bcd.h>
++
++#define RTC_NAME "rtc7301"
++#define RTC_VERSION "0.1"
++
++/* Epson RTC-7301 register addresses */
++#define RTC7301_SEC		0x00
++#define RTC7301_SEC10		0x01
++#define RTC7301_MIN		0x02
++#define RTC7301_MIN10		0x03
++#define RTC7301_HOUR		0x04
++#define RTC7301_HOUR10		0x05
++#define RTC7301_WEEKDAY		0x06
++#define RTC7301_DAY		0x07
++#define RTC7301_DAY10		0x08
++#define RTC7301_MON		0x09
++#define RTC7301_MON10		0x0A
++#define RTC7301_YEAR		0x0B
++#define RTC7301_YEAR10		0x0C
++#define RTC7301_YEAR100		0x0D
++#define RTC7301_YEAR1000	0x0E
++#define RTC7301_CTRLREG		0x0F
++
++static uint8_t __iomem *rtc7301_base;
++
++#define read_reg(offset) (readb(rtc7301_base + offset) & 0xf)
++#define write_reg(offset, data) writeb(data, rtc7301_base + (offset))
++
++#define rtc7301_isbusy() (read_reg(RTC7301_CTRLREG) & 1)
++
++static void rtc7301_init_settings(void)
++{
++	int i;
++
++	write_reg(RTC7301_CTRLREG, 2);
++	write_reg(RTC7301_YEAR1000, 2);
++	udelay(122);
++
++	/* bank 1 */
++	write_reg(RTC7301_CTRLREG, 6);
++	for (i=0; i<15; i++)
++		write_reg(i, 0);
++
++	/* bank 2 */
++	write_reg(RTC7301_CTRLREG, 14);
++	for (i=0; i<15; i++)
++		write_reg(i, 0);
++	write_reg(RTC7301_CTRLREG, 0);
++}
++
++static int rtc7301_get_datetime(struct device *dev, struct rtc_time *dt)
++{
++	int cnt;
++	uint8_t buf[16];
++
++	cnt = 0;
++	while (rtc7301_isbusy()) {
++		udelay(244);
++		if (cnt++ > 100) {
++			dev_err(dev, "%s: timeout error %x\n", __func__, rtc7301_base[RTC7301_CTRLREG]);
++			return -EIO;
++		}
++	}
++
++	for (cnt=0; cnt<16; cnt++)
++		buf[cnt] = read_reg(cnt);
++
++	if (buf[RTC7301_SEC10] & 8) {
++		dev_err(dev, "%s: RTC not set\n", __func__);
++		return -EINVAL;
++	}
++
++	memset(dt, 0, sizeof(*dt));
++
++	dt->tm_sec =  buf[RTC7301_SEC] + buf[RTC7301_SEC10]*10;
++	dt->tm_min =  buf[RTC7301_MIN] + buf[RTC7301_MIN10]*10;
++	dt->tm_hour = buf[RTC7301_HOUR] + buf[RTC7301_HOUR10]*10;
++
++	dt->tm_mday = buf[RTC7301_DAY] + buf[RTC7301_DAY10]*10;
++	dt->tm_mon =  buf[RTC7301_MON] + buf[RTC7301_MON10]*10 - 1;
++	dt->tm_year = buf[RTC7301_YEAR] + buf[RTC7301_YEAR10]*10 +
++		      buf[RTC7301_YEAR100]*100 +
++		      ((buf[RTC7301_YEAR1000] & 3)*1000) - 1900;
++
++	/* the rtc device may contain illegal values on power up
++	 * according to the data sheet. make sure they are valid.
++	 */
++
++	return rtc_valid_tm(dt);
++}
++
++static int rtc7301_set_datetime(struct device *dev, struct rtc_time *dt)
++{
++	int data;
++
++	data = dt->tm_year + 1900;
++	if (data >= 2100 || data < 1900)
++		return -EINVAL;
++
++	write_reg(RTC7301_CTRLREG, 2);
++       	udelay(122);
++
++	data = bin2bcd(dt->tm_sec);
++	write_reg(RTC7301_SEC, data);
++	write_reg(RTC7301_SEC10, (data >> 4));
++
++	data = bin2bcd(dt->tm_min);
++	write_reg(RTC7301_MIN, data );
++	write_reg(RTC7301_MIN10, (data >> 4));
++
++	data = bin2bcd(dt->tm_hour);
++	write_reg(RTC7301_HOUR, data);
++	write_reg(RTC7301_HOUR10, (data >> 4));
++
++	data = bin2bcd(dt->tm_mday);
++	write_reg(RTC7301_DAY, data);
++	write_reg(RTC7301_DAY10, (data>> 4));
++
++	data = bin2bcd(dt->tm_mon + 1);
++	write_reg(RTC7301_MON, data);
++	write_reg(RTC7301_MON10, (data >> 4));
++
++	data = bin2bcd(dt->tm_year % 100);
++	write_reg(RTC7301_YEAR, data);
++	write_reg(RTC7301_YEAR10, (data >> 4));
++	data = bin2bcd((1900 + dt->tm_year) / 100);
++	write_reg(RTC7301_YEAR100, data);
++
++	data = bin2bcd(dt->tm_wday);
++	write_reg(RTC7301_WEEKDAY, data);
++
++	write_reg(RTC7301_CTRLREG, 0);
++
++	return 0;
++}
++
++static const struct rtc_class_ops rtc7301_rtc_ops = {
++	.read_time	= rtc7301_get_datetime,
++	.set_time	= rtc7301_set_datetime,
++};
++
++static int __devinit rtc7301_probe(struct platform_device *pdev)
++{
++	struct rtc_device *rtc;
++	struct resource *res;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res)
++		return -ENOENT;
++
++	rtc7301_base = ioremap_nocache(res->start, 0x1000 /*res->end - res->start + 1*/);
++	if (!rtc7301_base)
++		return -EINVAL;
++
++	rtc = rtc_device_register(RTC_NAME, &pdev->dev,
++				&rtc7301_rtc_ops, THIS_MODULE);
++	if (IS_ERR(rtc)) {
++		iounmap(rtc7301_base);
++		return PTR_ERR(rtc);
++	}
++
++	platform_set_drvdata(pdev, rtc);
++
++	rtc7301_init_settings();
++	return 0;
++}
++
++static int __devexit rtc7301_remove(struct platform_device *pdev)
++{
++	struct rtc_device *rtc = platform_get_drvdata(pdev);
++
++	if (rtc)
++		rtc_device_unregister(rtc);
++	if (rtc7301_base)
++		iounmap(rtc7301_base);
++	return 0;
++}
++
++static struct platform_driver rtc7301_driver = {
++	.driver = {
++		.name	= RTC_NAME,
++		.owner	= THIS_MODULE,
++	},
++	.probe	= rtc7301_probe,
++	.remove = __devexit_p(rtc7301_remove),
++};
++
++static __init int rtc7301_init(void)
++{
++	return platform_driver_register(&rtc7301_driver);
++}
++module_init(rtc7301_init);
++
++static __exit void rtc7301_exit(void)
++{
++	platform_driver_unregister(&rtc7301_driver);
++}
++module_exit(rtc7301_exit);
++
++MODULE_DESCRIPTION("Epson 7301 RTC driver");
++MODULE_AUTHOR("Jose Vasconcellos <jvasco@verizon.net>");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:" RTC_NAME);
++MODULE_VERSION(RTC_VERSION);
diff --git a/target/linux/generic/patches-2.6.33/750-glamo-headers.patch b/target/linux/generic/patches-2.6.33/750-glamo-headers.patch
new file mode 100644
index 0000000000..419d98a424
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/750-glamo-headers.patch
@@ -0,0 +1,21 @@
+--- a/include/linux/fb.h
++++ b/include/linux/fb.h
+@@ -124,6 +124,7 @@ struct dentry;
+ #define FB_ACCEL_TRIDENT_BLADE3D 52	/* Trident Blade3D		*/
+ #define FB_ACCEL_TRIDENT_BLADEXP 53	/* Trident BladeXP		*/
+ #define FB_ACCEL_CIRRUS_ALPINE   53	/* Cirrus Logic 543x/544x/5480	*/
++#define FB_ACCEL_GLAMO		50	/* SMedia Glamo                 */
+ #define FB_ACCEL_NEOMAGIC_NM2070 90	/* NeoMagic NM2070              */
+ #define FB_ACCEL_NEOMAGIC_NM2090 91	/* NeoMagic NM2090              */
+ #define FB_ACCEL_NEOMAGIC_NM2093 92	/* NeoMagic NM2093              */
+--- a/include/linux/Kbuild
++++ b/include/linux/Kbuild
+@@ -76,6 +76,8 @@ header-y += genetlink.h
+ header-y += gen_stats.h
+ header-y += gfs2_ondisk.h
+ header-y += gigaset_dev.h
++header-y += glamofb.h
++header-y += glamo-engine.h
+ header-y += hysdn_if.h
+ header-y += i2o-dev.h
+ header-y += i8k.h
diff --git a/target/linux/generic/patches-2.6.33/801-usb_serial_endpoint_size.patch b/target/linux/generic/patches-2.6.33/801-usb_serial_endpoint_size.patch
new file mode 100644
index 0000000000..e6d06456a7
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/801-usb_serial_endpoint_size.patch
@@ -0,0 +1,25 @@
+--- a/drivers/usb/serial/usb-serial.c
++++ b/drivers/usb/serial/usb-serial.c
+@@ -61,6 +61,7 @@ static struct usb_driver usb_serial_driv
+    drivers depend on it.
+ */
+ 
++static ushort maxSize = 0;
+ static int debug;
+ /* initially all NULL */
+ static struct usb_serial *serial_table[SERIAL_TTY_MINORS];
+@@ -914,7 +915,7 @@ int usb_serial_probe(struct usb_interfac
+ 			dev_err(&interface->dev, "No free urbs available\n");
+ 			goto probe_error;
+ 		}
+-		buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
++		buffer_size = (endpoint->wMaxPacketSize > maxSize) ? endpoint->wMaxPacketSize : maxSize;
+ 		port->bulk_in_size = buffer_size;
+ 		port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
+ 		port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
+@@ -1356,3 +1357,5 @@ MODULE_LICENSE("GPL");
+ 
+ module_param(debug, bool, S_IRUGO | S_IWUSR);
+ MODULE_PARM_DESC(debug, "Debug enabled or not");
++module_param(maxSize, ushort,0);
++MODULE_PARM_DESC(maxSize,"User specified USB endpoint size");
diff --git a/target/linux/generic/patches-2.6.33/840-unable_to_open_console.patch b/target/linux/generic/patches-2.6.33/840-unable_to_open_console.patch
new file mode 100644
index 0000000000..8d90396761
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/840-unable_to_open_console.patch
@@ -0,0 +1,11 @@
+--- a/init/main.c
++++ b/init/main.c
+@@ -807,7 +807,7 @@ static noinline int init_post(void)
+ 	numa_default_policy();
+ 
+ 	if (sys_open((const char __user *) "/dev/console", O_RDWR, 0) < 0)
+-		printk(KERN_WARNING "Warning: unable to open an initial console.\n");
++		printk(KERN_WARNING "Please be patient, while OpenWrt loads ...\n");
+ 
+ 	(void) sys_dup(0);
+ 	(void) sys_dup(0);
diff --git a/target/linux/generic/patches-2.6.33/902-darwin_scripts_include.patch b/target/linux/generic/patches-2.6.33/902-darwin_scripts_include.patch
new file mode 100644
index 0000000000..be31abeac6
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/902-darwin_scripts_include.patch
@@ -0,0 +1,102 @@
+--- a/scripts/genksyms/parse.c_shipped
++++ b/scripts/genksyms/parse.c_shipped
+@@ -160,7 +160,9 @@
+ 
+ 
+ #include <assert.h>
++#ifndef __APPLE__
+ #include <malloc.h>
++#endif
+ #include "genksyms.h"
+ 
+ static int is_typedef;
+--- a/scripts/genksyms/parse.y
++++ b/scripts/genksyms/parse.y
+@@ -24,7 +24,9 @@
+ %{
+ 
+ #include <assert.h>
++#ifndef __APPLE__
+ #include <malloc.h>
++#endif
+ #include "genksyms.h"
+ 
+ static int is_typedef;
+--- a/scripts/kallsyms.c
++++ b/scripts/kallsyms.c
+@@ -22,6 +22,35 @@
+ #include <stdlib.h>
+ #include <string.h>
+ #include <ctype.h>
++#ifdef __APPLE__
++/* Darwin has no memmem implementation, this one is ripped of the uClibc-0.9.28 source */
++void *memmem (const void *haystack, size_t haystack_len,
++                          const void *needle,  size_t needle_len)
++{
++  const char *begin;
++  const char *const last_possible
++    = (const char *) haystack + haystack_len - needle_len;
++
++  if (needle_len == 0)
++    /* The first occurrence of the empty string is deemed to occur at
++       the beginning of the string.  */
++    return (void *) haystack;
++
++  /* Sanity check, otherwise the loop might search through the whole
++     memory.  */
++  if (__builtin_expect (haystack_len < needle_len, 0))
++    return NULL;
++
++  for (begin = (const char *) haystack; begin <= last_possible; ++begin)
++    if (begin[0] == ((const char *) needle)[0] &&
++        !memcmp ((const void *) &begin[1],
++                 (const void *) ((const char *) needle + 1),
++                 needle_len - 1))
++      return (void *) begin;
++
++  return NULL;
++}
++#endif
+ 
+ #ifndef ARRAY_SIZE
+ #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof(arr[0]))
+--- a/scripts/kconfig/Makefile
++++ b/scripts/kconfig/Makefile
+@@ -130,6 +130,9 @@ check-lxdialog  := $(srctree)/$(src)/lxd
+ # we really need to do so. (Do not call gcc as part of make mrproper)
+ HOST_EXTRACFLAGS = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags)
+ HOST_LOADLIBES   = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
++ifeq ($(shell uname -s),Darwin)
++HOST_LOADLIBES  += -lncurses
++endif
+ 
+ HOST_EXTRACFLAGS += -DLOCALE
+ 
+--- a/scripts/mod/mk_elfconfig.c
++++ b/scripts/mod/mk_elfconfig.c
+@@ -1,7 +1,11 @@
+ #include <stdio.h>
+ #include <stdlib.h>
+ #include <string.h>
++#ifndef __APPLE__
+ #include <elf.h>
++#else
++#include "../../../../../tools/sstrip/include/elf.h"
++#endif
+ 
+ int
+ main(int argc, char **argv)
+--- a/scripts/mod/modpost.h
++++ b/scripts/mod/modpost.h
+@@ -7,7 +7,11 @@
+ #include <sys/mman.h>
+ #include <fcntl.h>
+ #include <unistd.h>
++#if !(defined(__APPLE__) || defined(__CYGWIN__))
+ #include <elf.h>
++#else
++#include "../../../../../tools/sstrip/include/elf.h"
++#endif
+ 
+ #include "elfconfig.h"
+ 
diff --git a/target/linux/generic/patches-2.6.33/903-hostap_txpower.patch b/target/linux/generic/patches-2.6.33/903-hostap_txpower.patch
new file mode 100644
index 0000000000..7552ceb33d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/903-hostap_txpower.patch
@@ -0,0 +1,154 @@
+--- a/drivers/net/wireless/hostap/hostap_ap.c
++++ b/drivers/net/wireless/hostap/hostap_ap.c
+@@ -2335,13 +2335,13 @@ int prism2_ap_get_sta_qual(local_info_t 
+ 		addr[count].sa_family = ARPHRD_ETHER;
+ 		memcpy(addr[count].sa_data, sta->addr, ETH_ALEN);
+ 		if (sta->last_rx_silence == 0)
+-			qual[count].qual = sta->last_rx_signal < 27 ?
+-				0 : (sta->last_rx_signal - 27) * 92 / 127;
++                        qual[count].qual = (sta->last_rx_signal - 156) == 0 ?
++                                0 : (sta->last_rx_signal - 156) * 92 / 64;
+ 		else
+-			qual[count].qual = sta->last_rx_signal -
+-				sta->last_rx_silence - 35;
+-		qual[count].level = HFA384X_LEVEL_TO_dBm(sta->last_rx_signal);
+-		qual[count].noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence);
++                        qual[count].qual = (sta->last_rx_signal -
++                                sta->last_rx_silence) * 92 / 64;
++                qual[count].level = sta->last_rx_signal;
++                qual[count].noise = sta->last_rx_silence;
+ 		qual[count].updated = sta->last_rx_updated;
+ 
+ 		sta->last_rx_updated = IW_QUAL_DBM;
+@@ -2407,13 +2407,13 @@ int prism2_ap_translate_scan(struct net_
+ 		memset(&iwe, 0, sizeof(iwe));
+ 		iwe.cmd = IWEVQUAL;
+ 		if (sta->last_rx_silence == 0)
+-			iwe.u.qual.qual = sta->last_rx_signal < 27 ?
+-				0 : (sta->last_rx_signal - 27) * 92 / 127;
++	                iwe.u.qual.qual = (sta->last_rx_signal -156) == 0 ?
++	                        0 : (sta->last_rx_signal - 156) * 92 / 64;
+ 		else
+-			iwe.u.qual.qual = sta->last_rx_signal -
+-				sta->last_rx_silence - 35;
+-		iwe.u.qual.level = HFA384X_LEVEL_TO_dBm(sta->last_rx_signal);
+-		iwe.u.qual.noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence);
++                        iwe.u.qual.qual = (sta->last_rx_signal -
++                                sta->last_rx_silence) * 92 / 64;
++                iwe.u.qual.level = sta->last_rx_signal;
++                iwe.u.qual.noise = sta->last_rx_silence;
+ 		iwe.u.qual.updated = sta->last_rx_updated;
+ 		iwe.len = IW_EV_QUAL_LEN;
+ 		current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+--- a/drivers/net/wireless/hostap/hostap_config.h
++++ b/drivers/net/wireless/hostap/hostap_config.h
+@@ -45,4 +45,9 @@
+  */
+ /* #define PRISM2_NO_STATION_MODES */
+ 
++/* Enable TX power Setting functions
++ * (min att = -128 , max att =  127)
++ */
++#define RAW_TXPOWER_SETTING
++
+ #endif /* HOSTAP_CONFIG_H */
+--- a/drivers/net/wireless/hostap/hostap.h
++++ b/drivers/net/wireless/hostap/hostap.h
+@@ -90,6 +90,7 @@ extern const struct iw_handler_def hosta
+ extern const struct ethtool_ops prism2_ethtool_ops;
+ 
+ int hostap_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
++int hostap_restore_power(struct net_device *dev);
+ 
+ 
+ #endif /* HOSTAP_H */
+--- a/drivers/net/wireless/hostap/hostap_hw.c
++++ b/drivers/net/wireless/hostap/hostap_hw.c
+@@ -932,6 +932,7 @@ static int hfa384x_set_rid(struct net_de
+ 			prism2_hw_reset(dev);
+ 	}
+ 
++	hostap_restore_power(dev);
+ 	return res;
+ }
+ 
+--- a/drivers/net/wireless/hostap/hostap_info.c
++++ b/drivers/net/wireless/hostap/hostap_info.c
+@@ -432,6 +432,11 @@ static void handle_info_queue_linkstatus
+ 	}
+ 
+ 	/* Get BSSID if we have a valid AP address */
++
++	if ( val == HFA384X_LINKSTATUS_CONNECTED ||
++	     val == HFA384X_LINKSTATUS_DISCONNECTED )
++			hostap_restore_power(local->dev);
++
+ 	if (connected) {
+ 		netif_carrier_on(local->dev);
+ 		netif_carrier_on(local->ddev);
+--- a/drivers/net/wireless/hostap/hostap_ioctl.c
++++ b/drivers/net/wireless/hostap/hostap_ioctl.c
+@@ -1476,23 +1476,20 @@ static int prism2_txpower_hfa386x_to_dBm
+ 		val = 255;
+ 
+ 	tmp = val;
+-	tmp >>= 2;
+ 
+-	return -12 - tmp;
++	return tmp;
+ }
+ 
+ static u16 prism2_txpower_dBm_to_hfa386x(int val)
+ {
+ 	signed char tmp;
+ 
+-	if (val > 20)
+-		return 128;
+-	else if (val < -43)
++	if (val > 127)
+ 		return 127;
++	else if (val < -128)
++		return 128;
+ 
+ 	tmp = val;
+-	tmp = -12 - tmp;
+-	tmp <<= 2;
+ 
+ 	return (unsigned char) tmp;
+ }
+@@ -4056,3 +4053,35 @@ int hostap_ioctl(struct net_device *dev,
+ 
+ 	return ret;
+ }
++
++/* BUG FIX: Restore power setting value when lost due to F/W bug */
++
++int hostap_restore_power(struct net_device *dev)
++{
++        struct hostap_interface *iface = netdev_priv(dev);
++       local_info_t *local = iface->local;
++
++       u16 val;
++       int ret = 0;
++
++       if (local->txpower_type == PRISM2_TXPOWER_OFF) {
++                       val = 0xff; /* use all standby and sleep modes */
++                       ret = local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF,
++                                              HFA386X_CR_A_D_TEST_MODES2,
++                                              &val, NULL);
++       }
++
++#ifdef RAW_TXPOWER_SETTING
++       if (local->txpower_type == PRISM2_TXPOWER_FIXED) {
++               val = HFA384X_TEST_CFG_BIT_ALC;
++               local->func->cmd(dev, HFA384X_CMDCODE_TEST |
++                                (HFA384X_TEST_CFG_BITS << 8), 0, &val, NULL);
++               val = prism2_txpower_dBm_to_hfa386x(local->txpower);
++               ret = (local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF,
++                            HFA386X_CR_MANUAL_TX_POWER, &val, NULL));
++       }
++#endif /* RAW_TXPOWER_SETTING */
++       return (ret ? -EOPNOTSUPP : 0);
++}
++
++EXPORT_SYMBOL(hostap_restore_power);
diff --git a/target/linux/generic/patches-2.6.33/903-stddef_include.patch b/target/linux/generic/patches-2.6.33/903-stddef_include.patch
new file mode 100644
index 0000000000..7fe248d8d3
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/903-stddef_include.patch
@@ -0,0 +1,17 @@
+--- a/include/linux/stddef.h
++++ b/include/linux/stddef.h
+@@ -16,6 +16,7 @@ enum {
+ 	false	= 0,
+ 	true	= 1
+ };
++#endif /* __KERNEL__ */
+ 
+ #undef offsetof
+ #ifdef __compiler_offsetof
+@@ -23,6 +24,5 @@ enum {
+ #else
+ #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
+ #endif
+-#endif /* __KERNEL__ */
+ 
+ #endif
diff --git a/target/linux/generic/patches-2.6.33/905-i386_build.patch b/target/linux/generic/patches-2.6.33/905-i386_build.patch
new file mode 100644
index 0000000000..c701fdaa95
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/905-i386_build.patch
@@ -0,0 +1,10 @@
+--- a/arch/x86/boot/tools/build.c
++++ b/arch/x86/boot/tools/build.c
+@@ -29,7 +29,6 @@
+ #include <stdarg.h>
+ #include <sys/types.h>
+ #include <sys/stat.h>
+-#include <sys/sysmacros.h>
+ #include <unistd.h>
+ #include <fcntl.h>
+ #include <sys/mman.h>
diff --git a/target/linux/generic/patches-2.6.33/920-01-hotpluggable-spi-gpio.patch b/target/linux/generic/patches-2.6.33/920-01-hotpluggable-spi-gpio.patch
new file mode 100644
index 0000000000..b10bc9a65e
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/920-01-hotpluggable-spi-gpio.patch
@@ -0,0 +1,60 @@
+Fix spi-gpio for hotplug.
+
+--mb
+
+
+
+--- a/drivers/spi/spi_gpio.c
++++ b/drivers/spi/spi_gpio.c
+@@ -218,7 +218,7 @@ static void spi_gpio_cleanup(struct spi_
+ 	spi_bitbang_cleanup(spi);
+ }
+ 
+-static int __init spi_gpio_alloc(unsigned pin, const char *label, bool is_in)
++static int __devinit spi_gpio_alloc(unsigned pin, const char *label, bool is_in)
+ {
+ 	int value;
+ 
+@@ -232,7 +232,7 @@ static int __init spi_gpio_alloc(unsigne
+ 	return value;
+ }
+ 
+-static int __init
++static int __devinit
+ spi_gpio_request(struct spi_gpio_platform_data *pdata, const char *label)
+ {
+ 	int value;
+@@ -261,7 +261,7 @@ done:
+ 	return value;
+ }
+ 
+-static int __init spi_gpio_probe(struct platform_device *pdev)
++static int __devinit spi_gpio_probe(struct platform_device *pdev)
+ {
+ 	int				status;
+ 	struct spi_master		*master;
+@@ -317,7 +317,7 @@ gpio_free:
+ 	return status;
+ }
+ 
+-static int __exit spi_gpio_remove(struct platform_device *pdev)
++static int __devexit spi_gpio_remove(struct platform_device *pdev)
+ {
+ 	struct spi_gpio			*spi_gpio;
+ 	struct spi_gpio_platform_data	*pdata;
+@@ -344,12 +344,13 @@ MODULE_ALIAS("platform:" DRIVER_NAME);
+ static struct platform_driver spi_gpio_driver = {
+ 	.driver.name	= DRIVER_NAME,
+ 	.driver.owner	= THIS_MODULE,
+-	.remove		= __exit_p(spi_gpio_remove),
++	.probe		= spi_gpio_probe,
++	.remove		= __devexit_p(spi_gpio_remove),
+ };
+ 
+ static int __init spi_gpio_init(void)
+ {
+-	return platform_driver_probe(&spi_gpio_driver, spi_gpio_probe);
++	return platform_driver_register(&spi_gpio_driver);
+ }
+ module_init(spi_gpio_init);
+ 
diff --git a/target/linux/generic/patches-2.6.33/920-04-spi-gpio-implement-spi-delay.patch b/target/linux/generic/patches-2.6.33/920-04-spi-gpio-implement-spi-delay.patch
new file mode 100644
index 0000000000..19032881b8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/920-04-spi-gpio-implement-spi-delay.patch
@@ -0,0 +1,58 @@
+Implement the SPI-GPIO delay function for busses that need speed limitation.
+
+--mb
+
+
+
+--- a/drivers/spi/spi_gpio.c
++++ b/drivers/spi/spi_gpio.c
+@@ -21,6 +21,7 @@
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
+ #include <linux/gpio.h>
++#include <linux/delay.h>
+ 
+ #include <linux/spi/spi.h>
+ #include <linux/spi/spi_bitbang.h>
+@@ -69,6 +70,7 @@ struct spi_gpio {
+  *		#define	SPI_MOSI_GPIO	120
+  *		#define	SPI_SCK_GPIO	121
+  *		#define	SPI_N_CHIPSEL	4
++ *		#undef NEED_SPIDELAY
+  *		#include "spi_gpio.c"
+  */
+ 
+@@ -76,6 +78,7 @@ struct spi_gpio {
+ #define DRIVER_NAME	"spi_gpio"
+ 
+ #define GENERIC_BITBANG	/* vs tight inlines */
++#define NEED_SPIDELAY	1
+ 
+ /* all functions referencing these symbols must define pdata */
+ #define SPI_MISO_GPIO	((pdata)->miso)
+@@ -120,12 +123,20 @@ static inline int getmiso(const struct s
+ #undef pdata
+ 
+ /*
+- * NOTE:  this clocks "as fast as we can".  It "should" be a function of the
+- * requested device clock.  Software overhead means we usually have trouble
+- * reaching even one Mbit/sec (except when we can inline bitops), so for now
+- * we'll just assume we never need additional per-bit slowdowns.
++ * NOTE:  to clock "as fast as we can", set spi_device.max_speed_hz
++ * and spi_transfer.speed_hz to 0.
++ * Otherwise this is a function of the requested device clock.
++ * Software overhead means we usually have trouble
++ * reaching even one Mbit/sec (except when we can inline bitops). So on small
++ * embedded devices with fast SPI slaves you usually don't need a delay.
+  */
+-#define spidelay(nsecs)	do {} while (0)
++static inline void spidelay(unsigned nsecs)
++{
++#ifdef NEED_SPIDELAY
++	if (unlikely(nsecs))
++		ndelay(nsecs);
++#endif /* NEED_SPIDELAY */
++}
+ 
+ #define	EXPAND_BITBANG_TXRX
+ #include <linux/spi/spi_bitbang.h>
diff --git a/target/linux/generic/patches-2.6.33/921-gpio_spi_driver.patch b/target/linux/generic/patches-2.6.33/921-gpio_spi_driver.patch
new file mode 100644
index 0000000000..c37bb2280f
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/921-gpio_spi_driver.patch
@@ -0,0 +1,366 @@
+THIS CODE IS DEPRECATED.
+
+Please use the new mainline SPI-GPIO driver, as of 2.6.29.
+
+--mb
+
+
+
+--- /dev/null
++++ b/include/linux/spi/spi_gpio_old.h
+@@ -0,0 +1,73 @@
++/*
++ * spi_gpio interface to platform code
++ *
++ * Copyright (c) 2008 Piotr Skamruk
++ * Copyright (c) 2008 Michael Buesch
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef _LINUX_SPI_SPI_GPIO
++#define _LINUX_SPI_SPI_GPIO
++
++#include <linux/types.h>
++#include <linux/spi/spi.h>
++
++
++/**
++ * struct spi_gpio_platform_data - Data definitions for a SPI-GPIO device.
++ *
++ * This structure holds information about a GPIO-based SPI device.
++ *
++ * @pin_clk: The GPIO pin number of the CLOCK pin.
++ *
++ * @pin_miso: The GPIO pin number of the MISO pin.
++ *
++ * @pin_mosi: The GPIO pin number of the MOSI pin.
++ *
++ * @pin_cs: The GPIO pin number of the CHIPSELECT pin.
++ *
++ * @cs_activelow: If true, the chip is selected when the CS line is low.
++ *
++ * @no_spi_delay: If true, no delay is done in the lowlevel bitbanging.
++ *                Note that doing no delay is not standards compliant,
++ *                but it might be needed to speed up transfers on some
++ *                slow embedded machines.
++ *
++ * @boardinfo_setup: This callback is called after the
++ *                   SPI master device was registered, but before the
++ *                   device is registered.
++ * @boardinfo_setup_data: Data argument passed to boardinfo_setup().
++ */
++struct spi_gpio_platform_data {
++	unsigned int pin_clk;
++	unsigned int pin_miso;
++	unsigned int pin_mosi;
++	unsigned int pin_cs;
++	bool cs_activelow;
++	bool no_spi_delay;
++	int (*boardinfo_setup)(struct spi_board_info *bi,
++			       struct spi_master *master,
++			       void *data);
++	void *boardinfo_setup_data;
++};
++
++/**
++ * SPI_GPIO_PLATDEV_NAME - The platform device name string.
++ *
++ * The name string that has to be used for platform_device_alloc
++ * when allocating a spi-gpio device.
++ */
++#define SPI_GPIO_PLATDEV_NAME	"spi-gpio"
++
++/**
++ * spi_gpio_next_id - Get another platform device ID number.
++ *
++ * This returns the next platform device ID number that has to be used
++ * for platform_device_alloc. The ID is opaque and should not be used for
++ * anything else.
++ */
++int spi_gpio_next_id(void);
++
++#endif /* _LINUX_SPI_SPI_GPIO */
+--- /dev/null
++++ b/drivers/spi/spi_gpio_old.c
+@@ -0,0 +1,251 @@
++/*
++ * Bitbanging SPI bus driver using GPIO API
++ *
++ * Copyright (c) 2008 Piotr Skamruk
++ * Copyright (c) 2008 Michael Buesch
++ *
++ * based on spi_s3c2410_gpio.c
++ *   Copyright (c) 2006 Ben Dooks
++ *   Copyright (c) 2006 Simtec Electronics
++ * and on i2c-gpio.c
++ *   Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/spinlock.h>
++#include <linux/workqueue.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_bitbang.h>
++#include <linux/spi/spi_gpio_old.h>
++#include <linux/gpio.h>
++#include <asm/atomic.h>
++
++
++struct spi_gpio {
++	struct spi_bitbang bitbang;
++	struct spi_gpio_platform_data *info;
++	struct platform_device *pdev;
++	struct spi_board_info bi;
++};
++
++
++static inline struct spi_gpio *spidev_to_sg(struct spi_device *dev)
++{
++	return dev->controller_data;
++}
++
++static inline void setsck(struct spi_device *dev, int val)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++	gpio_set_value(sp->info->pin_clk, val ? 1 : 0);
++}
++
++static inline void setmosi(struct spi_device *dev, int val)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++	gpio_set_value(sp->info->pin_mosi, val ? 1 : 0);
++}
++
++static inline u32 getmiso(struct spi_device *dev)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++	return gpio_get_value(sp->info->pin_miso) ? 1 : 0;
++}
++
++static inline void do_spidelay(struct spi_device *dev, unsigned nsecs)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++
++	if (!sp->info->no_spi_delay)
++		ndelay(nsecs);
++}
++
++#define spidelay(nsecs) do {					\
++	/* Steal the spi_device pointer from our caller.	\
++	 * The bitbang-API should probably get fixed here... */	\
++	do_spidelay(spi, nsecs);				\
++  } while (0)
++
++#define EXPAND_BITBANG_TXRX
++#include <linux/spi/spi_bitbang.h>
++
++static u32 spi_gpio_txrx_mode0(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
++}
++
++static u32 spi_gpio_txrx_mode1(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
++}
++
++static u32 spi_gpio_txrx_mode2(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
++}
++
++static u32 spi_gpio_txrx_mode3(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
++}
++
++static void spi_gpio_chipselect(struct spi_device *dev, int on)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++
++	if (sp->info->cs_activelow)
++		on = !on;
++	gpio_set_value(sp->info->pin_cs, on ? 1 : 0);
++}
++
++static int spi_gpio_probe(struct platform_device *pdev)
++{
++	struct spi_master *master;
++	struct spi_gpio_platform_data *pdata;
++	struct spi_gpio *sp;
++	struct spi_device *spidev;
++	int err;
++
++	pdata = pdev->dev.platform_data;
++	if (!pdata)
++		return -ENXIO;
++
++	err = -ENOMEM;
++	master = spi_alloc_master(&pdev->dev, sizeof(struct spi_gpio));
++	if (!master)
++		goto err_alloc_master;
++
++	sp = spi_master_get_devdata(master);
++	platform_set_drvdata(pdev, sp);
++	sp->info = pdata;
++
++	err = gpio_request(pdata->pin_clk, "spi_clock");
++	if (err)
++		goto err_request_clk;
++	err = gpio_request(pdata->pin_mosi, "spi_mosi");
++	if (err)
++		goto err_request_mosi;
++	err = gpio_request(pdata->pin_miso, "spi_miso");
++	if (err)
++		goto err_request_miso;
++	err = gpio_request(pdata->pin_cs, "spi_cs");
++	if (err)
++		goto err_request_cs;
++
++	sp->bitbang.master = spi_master_get(master);
++	sp->bitbang.master->bus_num = -1;
++	sp->bitbang.master->num_chipselect = 1;
++	sp->bitbang.chipselect = spi_gpio_chipselect;
++	sp->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_mode0;
++	sp->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_mode1;
++	sp->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_mode2;
++	sp->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_mode3;
++
++	gpio_direction_output(pdata->pin_clk, 0);
++	gpio_direction_output(pdata->pin_mosi, 0);
++	gpio_direction_output(pdata->pin_cs,
++			      pdata->cs_activelow ? 1 : 0);
++	gpio_direction_input(pdata->pin_miso);
++
++	err = spi_bitbang_start(&sp->bitbang);
++	if (err)
++		goto err_no_bitbang;
++	err = pdata->boardinfo_setup(&sp->bi, master,
++				     pdata->boardinfo_setup_data);
++	if (err)
++		goto err_bi_setup;
++	sp->bi.controller_data = sp;
++	spidev = spi_new_device(master, &sp->bi);
++	if (!spidev)
++		goto err_new_dev;
++
++	return 0;
++
++err_new_dev:
++err_bi_setup:
++	spi_bitbang_stop(&sp->bitbang);
++err_no_bitbang:
++	spi_master_put(sp->bitbang.master);
++	gpio_free(pdata->pin_cs);
++err_request_cs:
++	gpio_free(pdata->pin_miso);
++err_request_miso:
++	gpio_free(pdata->pin_mosi);
++err_request_mosi:
++	gpio_free(pdata->pin_clk);
++err_request_clk:
++	kfree(master);
++
++err_alloc_master:
++	return err;
++}
++
++static int __devexit spi_gpio_remove(struct platform_device *pdev)
++{
++	struct spi_gpio *sp;
++	struct spi_gpio_platform_data *pdata;
++
++	pdata = pdev->dev.platform_data;
++	sp = platform_get_drvdata(pdev);
++
++	gpio_free(pdata->pin_clk);
++	gpio_free(pdata->pin_mosi);
++	gpio_free(pdata->pin_miso);
++	gpio_free(pdata->pin_cs);
++	spi_bitbang_stop(&sp->bitbang);
++	spi_master_put(sp->bitbang.master);
++
++	return 0;
++}
++
++static struct platform_driver spi_gpio_driver = {
++	.driver		= {
++		.name	= SPI_GPIO_PLATDEV_NAME,
++		.owner	= THIS_MODULE,
++	},
++	.probe		= spi_gpio_probe,
++	.remove		= __devexit_p(spi_gpio_remove),
++};
++
++int spi_gpio_next_id(void)
++{
++	static atomic_t counter = ATOMIC_INIT(-1);
++
++	return atomic_inc_return(&counter);
++}
++EXPORT_SYMBOL(spi_gpio_next_id);
++
++static int __init spi_gpio_init(void)
++{
++	int err;
++
++	err = platform_driver_register(&spi_gpio_driver);
++	if (err)
++		printk(KERN_ERR "spi-gpio: register failed: %d\n", err);
++
++	return err;
++}
++module_init(spi_gpio_init);
++
++static void __exit spi_gpio_exit(void)
++{
++	platform_driver_unregister(&spi_gpio_driver);
++}
++module_exit(spi_gpio_exit);
++
++MODULE_AUTHOR("Piot Skamruk <piotr.skamruk at gmail.com>");
++MODULE_AUTHOR("Michael Buesch");
++MODULE_DESCRIPTION("Platform independent GPIO bitbanging SPI driver");
++MODULE_LICENSE("GPL v2");
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -116,6 +116,15 @@ config SPI_GPIO
+ 	  GPIO operations, you should be able to leverage that for better
+ 	  speed with a custom version of this driver; see the source code.
+ 
++config SPI_GPIO_OLD
++	tristate "Old GPIO API based bitbanging SPI controller (DEPRECATED)"
++	depends on SPI_MASTER && GENERIC_GPIO
++	select SPI_BITBANG
++	help
++	  This code is deprecated. Please use the new mainline SPI-GPIO driver.
++
++	  If unsure, say N.
++
+ config SPI_IMX
+ 	tristate "Freescale i.MX SPI controllers"
+ 	depends on ARCH_MXC
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -19,6 +19,7 @@ obj-$(CONFIG_SPI_BUTTERFLY)		+= spi_butt
+ obj-$(CONFIG_SPI_DESIGNWARE)		+= dw_spi.o
+ obj-$(CONFIG_SPI_DW_PCI)		+= dw_spi_pci.o
+ obj-$(CONFIG_SPI_GPIO)			+= spi_gpio.o
++obj-$(CONFIG_SPI_GPIO_OLD)		+= spi_gpio_old.o
+ obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
+ obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
+ obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
diff --git a/target/linux/generic/patches-2.6.33/922-gpiommc.patch b/target/linux/generic/patches-2.6.33/922-gpiommc.patch
new file mode 100644
index 0000000000..cb39a705f2
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/922-gpiommc.patch
@@ -0,0 +1,843 @@
+--- /dev/null
++++ b/drivers/mmc/host/gpiommc.c
+@@ -0,0 +1,608 @@
++/*
++ * Driver an MMC/SD card on a bitbanging GPIO SPI bus.
++ * This module hooks up the mmc_spi and spi_gpio modules and also
++ * provides a configfs interface.
++ *
++ * Copyright 2008 Michael Buesch <mb@bu3sch.de>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include <linux/mmc/gpiommc.h>
++#include <linux/platform_device.h>
++#include <linux/list.h>
++#include <linux/mutex.h>
++#include <linux/spi/spi_gpio_old.h>
++#include <linux/configfs.h>
++#include <linux/gpio.h>
++#include <asm/atomic.h>
++
++
++#define PFX				"gpio-mmc: "
++
++
++struct gpiommc_device {
++	struct platform_device *pdev;
++	struct platform_device *spi_pdev;
++	struct spi_board_info boardinfo;
++};
++
++
++MODULE_DESCRIPTION("GPIO based MMC driver");
++MODULE_AUTHOR("Michael Buesch");
++MODULE_LICENSE("GPL");
++
++
++static int gpiommc_boardinfo_setup(struct spi_board_info *bi,
++				   struct spi_master *master,
++				   void *data)
++{
++	struct gpiommc_device *d = data;
++	struct gpiommc_platform_data *pdata = d->pdev->dev.platform_data;
++
++	/* Bind the SPI master to the MMC-SPI host driver. */
++	strlcpy(bi->modalias, "mmc_spi", sizeof(bi->modalias));
++
++	bi->max_speed_hz = pdata->max_bus_speed;
++	bi->bus_num = master->bus_num;
++	bi->mode = pdata->mode;
++
++	return 0;
++}
++
++static int gpiommc_probe(struct platform_device *pdev)
++{
++	struct gpiommc_platform_data *mmc_pdata = pdev->dev.platform_data;
++	struct spi_gpio_platform_data spi_pdata;
++	struct gpiommc_device *d;
++	int err;
++
++	err = -ENXIO;
++	if (!mmc_pdata)
++		goto error;
++
++#ifdef CONFIG_MMC_SPI_MODULE
++	err = request_module("mmc_spi");
++	if (err) {
++		printk(KERN_WARNING PFX
++		       "Failed to request mmc_spi module.\n");
++	}
++#endif /* CONFIG_MMC_SPI_MODULE */
++
++	/* Allocate the GPIO-MMC device */
++	err = -ENOMEM;
++	d = kzalloc(sizeof(*d), GFP_KERNEL);
++	if (!d)
++		goto error;
++	d->pdev = pdev;
++
++	/* Create the SPI-GPIO device */
++	d->spi_pdev = platform_device_alloc(SPI_GPIO_PLATDEV_NAME,
++					    spi_gpio_next_id());
++	if (!d->spi_pdev)
++		goto err_free_d;
++
++	memset(&spi_pdata, 0, sizeof(spi_pdata));
++	spi_pdata.pin_clk = mmc_pdata->pins.gpio_clk;
++	spi_pdata.pin_miso = mmc_pdata->pins.gpio_do;
++	spi_pdata.pin_mosi = mmc_pdata->pins.gpio_di;
++	spi_pdata.pin_cs = mmc_pdata->pins.gpio_cs;
++	spi_pdata.cs_activelow = mmc_pdata->pins.cs_activelow;
++	spi_pdata.no_spi_delay = mmc_pdata->no_spi_delay;
++	spi_pdata.boardinfo_setup = gpiommc_boardinfo_setup;
++	spi_pdata.boardinfo_setup_data = d;
++
++	err = platform_device_add_data(d->spi_pdev, &spi_pdata,
++				       sizeof(spi_pdata));
++	if (err)
++		goto err_free_pdev;
++	err = platform_device_add(d->spi_pdev);
++	if (err)
++		goto err_free_pdata;
++	platform_set_drvdata(pdev, d);
++
++	printk(KERN_INFO PFX "MMC-Card \"%s\" "
++	       "attached to GPIO pins di=%u, do=%u, clk=%u, cs=%u\n",
++	       mmc_pdata->name, mmc_pdata->pins.gpio_di,
++	       mmc_pdata->pins.gpio_do,
++	       mmc_pdata->pins.gpio_clk,
++	       mmc_pdata->pins.gpio_cs);
++
++	return 0;
++
++err_free_pdata:
++	kfree(d->spi_pdev->dev.platform_data);
++	d->spi_pdev->dev.platform_data = NULL;
++err_free_pdev:
++	platform_device_put(d->spi_pdev);
++err_free_d:
++	kfree(d);
++error:
++	return err;
++}
++
++static int gpiommc_remove(struct platform_device *pdev)
++{
++	struct gpiommc_device *d = platform_get_drvdata(pdev);
++	struct gpiommc_platform_data *pdata = d->pdev->dev.platform_data;
++
++	platform_device_unregister(d->spi_pdev);
++	printk(KERN_INFO PFX "GPIO based MMC-Card \"%s\" removed\n",
++	       pdata->name);
++	platform_device_put(d->spi_pdev);
++
++	return 0;
++}
++
++#ifdef CONFIG_GPIOMMC_CONFIGFS
++
++/* A device that was created through configfs */
++struct gpiommc_configfs_device {
++	struct config_item item;
++	/* The platform device, after registration. */
++	struct platform_device *pdev;
++	/* The configuration */
++	struct gpiommc_platform_data pdata;
++};
++
++#define GPIO_INVALID	-1
++
++static inline bool gpiommc_is_registered(struct gpiommc_configfs_device *dev)
++{
++	return (dev->pdev != NULL);
++}
++
++static inline struct gpiommc_configfs_device *ci_to_gpiommc(struct config_item *item)
++{
++	return item ? container_of(item, struct gpiommc_configfs_device, item) : NULL;
++}
++
++static struct configfs_attribute gpiommc_attr_DI = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_data_in",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_DO = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_data_out",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_CLK = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_clock",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_CS = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_chipselect",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_CS_activelow = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_chipselect_activelow",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_spimode = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "spi_mode",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_spidelay = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "spi_delay",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_max_bus_speed = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "max_bus_speed",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_register = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "register",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute *gpiommc_config_attrs[] = {
++	&gpiommc_attr_DI,
++	&gpiommc_attr_DO,
++	&gpiommc_attr_CLK,
++	&gpiommc_attr_CS,
++	&gpiommc_attr_CS_activelow,
++	&gpiommc_attr_spimode,
++	&gpiommc_attr_spidelay,
++	&gpiommc_attr_max_bus_speed,
++	&gpiommc_attr_register,
++	NULL,
++};
++
++static ssize_t gpiommc_config_attr_show(struct config_item *item,
++					struct configfs_attribute *attr,
++					char *page)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++	ssize_t count = 0;
++	unsigned int gpio;
++	int err = 0;
++
++	if (attr == &gpiommc_attr_DI) {
++		gpio = dev->pdata.pins.gpio_di;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_DO) {
++		gpio = dev->pdata.pins.gpio_do;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CLK) {
++		gpio = dev->pdata.pins.gpio_clk;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS) {
++		gpio = dev->pdata.pins.gpio_cs;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS_activelow) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 dev->pdata.pins.cs_activelow);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spimode) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 dev->pdata.mode);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spidelay) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 !dev->pdata.no_spi_delay);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_max_bus_speed) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 dev->pdata.max_bus_speed);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_register) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 gpiommc_is_registered(dev));
++		goto out;
++	}
++	WARN_ON(1);
++	err = -ENOSYS;
++out:
++	return err ? err : count;
++}
++
++static int gpiommc_do_register(struct gpiommc_configfs_device *dev,
++			       const char *name)
++{
++	int err;
++
++	if (gpiommc_is_registered(dev))
++		return 0;
++
++	if (!gpio_is_valid(dev->pdata.pins.gpio_di) ||
++	    !gpio_is_valid(dev->pdata.pins.gpio_do) ||
++	    !gpio_is_valid(dev->pdata.pins.gpio_clk) ||
++	    !gpio_is_valid(dev->pdata.pins.gpio_cs)) {
++		printk(KERN_ERR PFX
++		       "configfs: Invalid GPIO pin number(s)\n");
++		return -EINVAL;
++	}
++
++	strlcpy(dev->pdata.name, name,
++		sizeof(dev->pdata.name));
++
++	dev->pdev = platform_device_alloc(GPIOMMC_PLATDEV_NAME,
++					  gpiommc_next_id());
++	if (!dev->pdev)
++		return -ENOMEM;
++	err = platform_device_add_data(dev->pdev, &dev->pdata,
++				       sizeof(dev->pdata));
++	if (err) {
++		platform_device_put(dev->pdev);
++		return err;
++	}
++	err = platform_device_add(dev->pdev);
++	if (err) {
++		platform_device_put(dev->pdev);
++		return err;
++	}
++
++	return 0;
++}
++
++static void gpiommc_do_unregister(struct gpiommc_configfs_device *dev)
++{
++	if (!gpiommc_is_registered(dev))
++		return;
++
++	platform_device_unregister(dev->pdev);
++	dev->pdev = NULL;
++}
++
++static ssize_t gpiommc_config_attr_store(struct config_item *item,
++					 struct configfs_attribute *attr,
++					 const char *page, size_t count)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++	int err = -EINVAL;
++	unsigned long data;
++
++	if (attr == &gpiommc_attr_register) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data == 1)
++			err = gpiommc_do_register(dev, item->ci_name);
++		if (data == 0) {
++			gpiommc_do_unregister(dev);
++			err = 0;
++		}
++		goto out;
++	}
++
++	if (gpiommc_is_registered(dev)) {
++		/* The rest of the config parameters can only be set
++		 * as long as the device is not registered, yet. */
++		err = -EBUSY;
++		goto out;
++	}
++
++	if (attr == &gpiommc_attr_DI) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_di = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_DO) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_do = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CLK) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_clk = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_cs = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS_activelow) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data != 0 && data != 1)
++			goto out;
++		dev->pdata.pins.cs_activelow = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spimode) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		switch (data) {
++		case 0:
++			dev->pdata.mode = SPI_MODE_0;
++			break;
++		case 1:
++			dev->pdata.mode = SPI_MODE_1;
++			break;
++		case 2:
++			dev->pdata.mode = SPI_MODE_2;
++			break;
++		case 3:
++			dev->pdata.mode = SPI_MODE_3;
++			break;
++		default:
++			goto out;
++		}
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spidelay) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data != 0 && data != 1)
++			goto out;
++		dev->pdata.no_spi_delay = !data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_max_bus_speed) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data > UINT_MAX)
++			goto out;
++		dev->pdata.max_bus_speed = data;
++		err = 0;
++		goto out;
++	}
++	WARN_ON(1);
++	err = -ENOSYS;
++out:
++	return err ? err : count;
++}
++
++static void gpiommc_config_item_release(struct config_item *item)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++
++	kfree(dev);
++}
++
++static struct configfs_item_operations gpiommc_config_item_ops = {
++	.release		= gpiommc_config_item_release,
++	.show_attribute		= gpiommc_config_attr_show,
++	.store_attribute	= gpiommc_config_attr_store,
++};
++
++static struct config_item_type gpiommc_dev_ci_type = {
++	.ct_item_ops	= &gpiommc_config_item_ops,
++	.ct_attrs	= gpiommc_config_attrs,
++	.ct_owner	= THIS_MODULE,
++};
++
++static struct config_item *gpiommc_make_item(struct config_group *group,
++					     const char *name)
++{
++	struct gpiommc_configfs_device *dev;
++
++	if (strlen(name) > GPIOMMC_MAX_NAMELEN) {
++		printk(KERN_ERR PFX "configfs: device name too long\n");
++		return NULL;
++	}
++
++	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
++	if (!dev)
++		return NULL;
++
++	config_item_init_type_name(&dev->item, name,
++				   &gpiommc_dev_ci_type);
++
++	/* Assign default configuration */
++	dev->pdata.pins.gpio_di = GPIO_INVALID;
++	dev->pdata.pins.gpio_do = GPIO_INVALID;
++	dev->pdata.pins.gpio_clk = GPIO_INVALID;
++	dev->pdata.pins.gpio_cs = GPIO_INVALID;
++	dev->pdata.pins.cs_activelow = 1;
++	dev->pdata.mode = SPI_MODE_0;
++	dev->pdata.no_spi_delay = 0;
++	dev->pdata.max_bus_speed = 5000000; /* 5 MHz */
++
++	return &(dev->item);
++}
++
++static void gpiommc_drop_item(struct config_group *group,
++			      struct config_item *item)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++
++	gpiommc_do_unregister(dev);
++	kfree(dev);
++}
++
++static struct configfs_group_operations gpiommc_ct_group_ops = {
++	.make_item	= gpiommc_make_item,
++	.drop_item	= gpiommc_drop_item,
++};
++
++static struct config_item_type gpiommc_ci_type = {
++	.ct_group_ops	= &gpiommc_ct_group_ops,
++	.ct_owner	= THIS_MODULE,
++};
++
++static struct configfs_subsystem gpiommc_subsys = {
++	.su_group = {
++		.cg_item = {
++			.ci_namebuf = GPIOMMC_PLATDEV_NAME,
++			.ci_type = &gpiommc_ci_type,
++		},
++	},
++	.su_mutex = __MUTEX_INITIALIZER(gpiommc_subsys.su_mutex),
++};
++
++#endif /* CONFIG_GPIOMMC_CONFIGFS */
++
++static struct platform_driver gpiommc_plat_driver = {
++	.probe	= gpiommc_probe,
++	.remove	= gpiommc_remove,
++	.driver	= {
++		.name	= GPIOMMC_PLATDEV_NAME,
++		.owner	= THIS_MODULE,
++	},
++};
++
++int gpiommc_next_id(void)
++{
++	static atomic_t counter = ATOMIC_INIT(-1);
++
++	return atomic_inc_return(&counter);
++}
++EXPORT_SYMBOL(gpiommc_next_id);
++
++static int __init gpiommc_modinit(void)
++{
++	int err;
++
++	err = platform_driver_register(&gpiommc_plat_driver);
++	if (err)
++		return err;
++
++#ifdef CONFIG_GPIOMMC_CONFIGFS
++	config_group_init(&gpiommc_subsys.su_group);
++	err = configfs_register_subsystem(&gpiommc_subsys);
++	if (err) {
++		platform_driver_unregister(&gpiommc_plat_driver);
++		return err;
++	}
++#endif /* CONFIG_GPIOMMC_CONFIGFS */
++
++	return 0;
++}
++module_init(gpiommc_modinit);
++
++static void __exit gpiommc_modexit(void)
++{
++#ifdef CONFIG_GPIOMMC_CONFIGFS
++	configfs_unregister_subsystem(&gpiommc_subsys);
++#endif
++	platform_driver_unregister(&gpiommc_plat_driver);
++}
++module_exit(gpiommc_modexit);
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -373,6 +373,31 @@ config MMC_TMIO
+ 	  This provides support for the SD/MMC cell found in TC6393XB,
+ 	  T7L66XB and also HTC ASIC3
+ 
++config GPIOMMC
++	tristate "MMC/SD over GPIO-based SPI"
++	depends on MMC && MMC_SPI && SPI_GPIO_OLD
++	help
++	  This driver hooks up the mmc_spi and spi_gpio modules so that
++	  MMC/SD cards can be used on a GPIO based bus by bitbanging
++	  the SPI protocol in software.
++
++	  This driver provides a configfs interface to dynamically create
++	  and destroy GPIO-based MMC/SD card devices. It also provides
++	  a platform device interface API.
++	  See Documentation/gpiommc.txt for details.
++
++	  The module will be called gpiommc.
++
++	  If unsure, say N.
++
++config GPIOMMC_CONFIGFS
++	bool
++	depends on GPIOMMC && CONFIGFS_FS
++	default y
++	help
++	  This option automatically enables configfs support for gpiommc
++	  if configfs is available.
++
+ config MMC_CB710
+ 	tristate "ENE CB710 MMC/SD Interface support"
+ 	depends on PCI
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -34,6 +34,7 @@ obj-$(CONFIG_MMC_SDRICOH_CS)	+= sdricoh_
+ obj-$(CONFIG_MMC_TMIO)		+= tmio_mmc.o
+ obj-$(CONFIG_MMC_CB710)	+= cb710-mmc.o
+ obj-$(CONFIG_MMC_VIA_SDMMC)	+= via-sdmmc.o
++obj-$(CONFIG_GPIOMMC)		+= gpiommc.o
+ obj-$(CONFIG_SDH_BFIN)		+= bfin_sdh.o
+ 
+ obj-$(CONFIG_MMC_SDHCI_OF)	+= sdhci-of.o
+--- /dev/null
++++ b/include/linux/mmc/gpiommc.h
+@@ -0,0 +1,71 @@
++/*
++ * Device driver for MMC/SD cards driven over a GPIO bus.
++ *
++ * Copyright (c) 2008 Michael Buesch
++ *
++ * Licensed under the GNU/GPL version 2.
++ */
++#ifndef LINUX_GPIOMMC_H_
++#define LINUX_GPIOMMC_H_
++
++#include <linux/types.h>
++
++
++#define GPIOMMC_MAX_NAMELEN		15
++#define GPIOMMC_MAX_NAMELEN_STR		__stringify(GPIOMMC_MAX_NAMELEN)
++
++/**
++ * struct gpiommc_pins - Hardware pin assignments
++ *
++ * @gpio_di: The GPIO number of the DATA IN pin
++ * @gpio_do: The GPIO number of the DATA OUT pin
++ * @gpio_clk: The GPIO number of the CLOCK pin
++ * @gpio_cs: The GPIO number of the CHIPSELECT pin
++ * @cs_activelow: If true, the chip is considered selected if @gpio_cs is low.
++ */
++struct gpiommc_pins {
++	unsigned int gpio_di;
++	unsigned int gpio_do;
++	unsigned int gpio_clk;
++	unsigned int gpio_cs;
++	bool cs_activelow;
++};
++
++/**
++ * struct gpiommc_platform_data - Platform data for a MMC-over-SPI-GPIO device.
++ *
++ * @name: The unique name string of the device.
++ * @pins: The hardware pin assignments.
++ * @mode: The hardware mode. This is either SPI_MODE_0,
++ *        SPI_MODE_1, SPI_MODE_2 or SPI_MODE_3. See the SPI documentation.
++ * @no_spi_delay: Do not use delays in the lowlevel SPI bitbanging code.
++ *                This is not standards compliant, but may be required for some
++ *                embedded machines to gain reasonable speed.
++ * @max_bus_speed: The maximum speed of the SPI bus, in Hertz.
++ */
++struct gpiommc_platform_data {
++	char name[GPIOMMC_MAX_NAMELEN + 1];
++	struct gpiommc_pins pins;
++	u8 mode;
++	bool no_spi_delay;
++	unsigned int max_bus_speed;
++};
++
++/**
++ * GPIOMMC_PLATDEV_NAME - The platform device name string.
++ *
++ * The name string that has to be used for platform_device_alloc
++ * when allocating a gpiommc device.
++ */
++#define GPIOMMC_PLATDEV_NAME	"gpiommc"
++
++/**
++ * gpiommc_next_id - Get another platform device ID number.
++ *
++ * This returns the next platform device ID number that has to be used
++ * for platform_device_alloc. The ID is opaque and should not be used for
++ * anything else.
++ */
++int gpiommc_next_id(void);
++
++#endif /* LINUX_GPIOMMC_H_ */
+--- /dev/null
++++ b/Documentation/gpiommc.txt
+@@ -0,0 +1,97 @@
++GPIOMMC - Driver for an MMC/SD card on a bitbanging GPIO SPI bus
++================================================================
++
++The gpiommc module hooks up the mmc_spi and spi_gpio modules for running an
++MMC or SD card on GPIO pins.
++
++Two interfaces for registering a new MMC/SD card device are provided:
++A static platform-device based mechanism and a dynamic configfs based interface.
++
++
++Registering devices via platform-device
++=======================================
++
++The platform-device interface is used for registering MMC/SD devices that are
++part of the hardware platform. This is most useful only for embedded machines
++with MMC/SD devices statically connected to the platform GPIO bus.
++
++The data structures are declared in <linux/mmc/gpiommc.h>.
++
++To register a new device, define an instance of struct gpiommc_platform_data.
++This structure holds any information about how the device is hooked up to the
++GPIO pins and what hardware modes the device supports. See the docbook-style
++documentation in the header file for more information on the struct fields.
++
++Then allocate a new instance of a platform device by doing:
++
++	pdev = platform_device_alloc(GPIOMMC_PLATDEV_NAME, gpiommc_next_id());
++
++This will allocate the platform device data structures and hook it up to the
++gpiommc driver.
++Then add the gpiommc_platform_data to the platform device.
++
++	err = platform_device_add_data(pdev, pdata, sizeof(struct gpiommc_platform_data));
++
++You may free the local instance of struct gpiommc_platform_data now. (So the
++struct may be allocated on the stack, too).
++Now simply register the platform device.
++
++	err = platform_device_add(pdev);
++
++Done. The gpiommc probe routine will be invoked now and you should see a kernel
++log message for the added device.
++
++
++Registering devices via configfs
++================================
++
++MMC/SD cards connected via GPIO often are a pretty dynamic thing, as for example
++selfmade hacks for soldering an MMC/SD card to standard GPIO pins on embedded
++hardware are a common situation.
++So we provide a dynamic interface to conveniently handle adding and removing
++devices from userspace, without the need to recompile the kernel.
++
++The "gpiommc" subdirectory at the configfs mountpoint is used for handling
++the dynamic configuration.
++
++To create a new device, it must first be allocated with mkdir.
++The following command will allocate a device named "my_mmc":
++	mkdir /config/gpiommc/my_mmc
++
++There are several configuration files available in the new
++/config/gpiommc/my_mmc/ directory:
++
++gpio_data_in			= The SPI data-IN GPIO pin number.
++gpio_data_out			= The SPI data-OUT GPIO pin number.
++gpio_clock			= The SPI Clock GPIO pin number.
++gpio_chipselect			= The SPI Chipselect GPIO pin number.
++gpio_chipselect_activelow	= Boolean. If 0, Chipselect is active-HIGH.
++				  If 1, Chipselect is active-LOW.
++spi_mode			= The SPI data mode. Can be 0-3.
++spi_delay			= Enable all delays in the lowlevel bitbanging.
++max_bus_speed			= The maximum SPI bus speed. In Hertz.
++
++register			= Not a configuration parameter.
++				  Used to register the configured card
++				  with the kernel.
++
++The device must first get configured and then registered by writing "1" to
++the "register" file.
++The configuration parameters "gpio_data_in", "gpio_data_out", "gpio_clock"
++and "gpio_chipselect" are essential and _must_ be configured before writing
++"1" to the "register" file. The registration will fail, otherwise.
++
++The default values for the other parameters are:
++gpio_chipselect_activelow	= 1		(CS active-LOW)
++spi_mode			= 0		(SPI_MODE_0)
++spi_delay			= 1		(enabled)
++max_bus_speed			= 5000000	(5 Mhz)
++
++Configuration values can not be changed after registration. To unregister
++the device, write a "0" to the "register" file. The configuration can be
++changed again after unregistering.
++
++To completely remove the device, simply rmdir the directory
++(/config/gpiommc/my_mmc in this example).
++There's no need to first unregister the device before removing it. That will
++be done automatically.
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -2443,6 +2443,11 @@ T:	git git://git.kernel.org/pub/scm/linu
+ S:	Maintained
+ F:	drivers/media/video/gspca/
+ 
++GPIOMMC DRIVER
++P:	Michael Buesch
++M:	mb@bu3sch.de
++S:	Maintained
++
+ HARDWARE MONITORING
+ L:	lm-sensors@lm-sensors.org
+ W:	http://www.lm-sensors.org/
diff --git a/target/linux/generic/patches-2.6.33/923-gpiommc-configfs-locking.patch b/target/linux/generic/patches-2.6.33/923-gpiommc-configfs-locking.patch
new file mode 100644
index 0000000000..2e4e820b2b
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/923-gpiommc-configfs-locking.patch
@@ -0,0 +1,58 @@
+The gpiommc configfs context structure needs locking, as configfs
+does not lock access between files.
+
+--- a/drivers/mmc/host/gpiommc.c
++++ b/drivers/mmc/host/gpiommc.c
+@@ -143,6 +143,8 @@ struct gpiommc_configfs_device {
+ 	struct platform_device *pdev;
+ 	/* The configuration */
+ 	struct gpiommc_platform_data pdata;
++	/* Mutex to protect this structure */
++	struct mutex mutex;
+ };
+ 
+ #define GPIO_INVALID	-1
+@@ -233,6 +235,8 @@ static ssize_t gpiommc_config_attr_show(
+ 	unsigned int gpio;
+ 	int err = 0;
+ 
++	mutex_lock(&dev->mutex);
++
+ 	if (attr == &gpiommc_attr_DI) {
+ 		gpio = dev->pdata.pins.gpio_di;
+ 		if (gpio == GPIO_INVALID)
+@@ -293,6 +297,8 @@ static ssize_t gpiommc_config_attr_show(
+ 	WARN_ON(1);
+ 	err = -ENOSYS;
+ out:
++	mutex_unlock(&dev->mutex);
++
+ 	return err ? err : count;
+ }
+ 
+@@ -352,6 +358,8 @@ static ssize_t gpiommc_config_attr_store
+ 	int err = -EINVAL;
+ 	unsigned long data;
+ 
++	mutex_lock(&dev->mutex);
++
+ 	if (attr == &gpiommc_attr_register) {
+ 		err = strict_strtoul(page, 10, &data);
+ 		if (err)
+@@ -477,6 +485,8 @@ static ssize_t gpiommc_config_attr_store
+ 	WARN_ON(1);
+ 	err = -ENOSYS;
+ out:
++	mutex_unlock(&dev->mutex);
++
+ 	return err ? err : count;
+ }
+ 
+@@ -513,6 +523,7 @@ static struct config_item *gpiommc_make_
+ 	if (!dev)
+ 		return NULL;
+ 
++	mutex_init(&dev->mutex);
+ 	config_item_init_type_name(&dev->item, name,
+ 				   &gpiommc_dev_ci_type);
+ 
diff --git a/target/linux/generic/patches-2.6.33/924-cs5535_gpio.patch b/target/linux/generic/patches-2.6.33/924-cs5535_gpio.patch
new file mode 100644
index 0000000000..4cb3031db5
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/924-cs5535_gpio.patch
@@ -0,0 +1,102 @@
+--- a/drivers/char/cs5535_gpio.c
++++ b/drivers/char/cs5535_gpio.c
+@@ -15,6 +15,7 @@
+ #include <linux/kernel.h>
+ #include <linux/init.h>
+ #include <linux/cdev.h>
++#include <linux/device.h>
+ #include <linux/ioport.h>
+ #include <linux/pci.h>
+ 
+@@ -48,6 +49,7 @@ static struct pci_device_id divil_pci[] 
+ MODULE_DEVICE_TABLE(pci, divil_pci);
+ 
+ static struct cdev cs5535_gpio_cdev;
++static struct class *cs5535_gpio_class;
+ 
+ /* reserve 32 entries even though some aren't usable */
+ #define CS5535_GPIO_COUNT	32
+@@ -66,9 +68,14 @@ static struct gpio_regmap rm[] =
+ 	{ 0x30, 0x00, '1', '0' },	/* GPIOx_READ_BACK / GPIOx_OUT_VAL */
+ 	{ 0x20, 0x20, 'I', 'i' },	/* GPIOx_IN_EN */
+ 	{ 0x04, 0x04, 'O', 'o' },	/* GPIOx_OUT_EN */
++	{ 0x10, 0x10, 'A', 'a' },	/* GPIOx_OUT_AUX1_SEL */
++	{ 0x14, 0x14, 'B', 'b' },	/* GPIOx_OUT_AUX2_SEL */
+ 	{ 0x08, 0x08, 't', 'T' },	/* GPIOx_OUT_OD_EN */
+ 	{ 0x18, 0x18, 'P', 'p' },	/* GPIOx_OUT_PU_EN */
+ 	{ 0x1c, 0x1c, 'D', 'd' },	/* GPIOx_OUT_PD_EN */
++	{ 0x24, 0x24, 'N', 'n' },	/* GPIOx_IN_INV_EN */
++	{ 0x0c, 0x0c, 'X', 'x' },	/* GPIOx_OUT_INV_EN */
++	{ 0x00, 0x00, 'H', 'L' },	/* GPIOx_OUT_VAL */
+ };
+ 
+ 
+@@ -176,7 +183,7 @@ static int __init cs5535_gpio_init(void)
+ {
+ 	dev_t	dev_id;
+ 	u32	low, hi;
+-	int	retval;
++	int	retval, i;
+ 
+ 	if (pci_dev_present(divil_pci) == 0) {
+ 		printk(KERN_WARNING NAME ": DIVIL not found\n");
+@@ -231,23 +238,54 @@ static int __init cs5535_gpio_init(void)
+ 		major = MAJOR(dev_id);
+ 	}
+ 
+-	if (retval) {
+-		release_region(gpio_base, CS5535_GPIO_SIZE);
+-		return -1;
+-	}
++	if (retval)
++		goto error;
+ 
+ 	printk(KERN_DEBUG NAME ": base=%#x mask=%#lx major=%d\n",
+ 	       gpio_base, mask, major);
+ 
+ 	cdev_init(&cs5535_gpio_cdev, &cs5535_gpio_fops);
+-	cdev_add(&cs5535_gpio_cdev, dev_id, CS5535_GPIO_COUNT);
++	retval = cdev_add(&cs5535_gpio_cdev, dev_id, CS5535_GPIO_COUNT);
++	if (retval) {
++		kobject_put(&cs5535_gpio_cdev.kobj);
++		goto error_region;
++	}
++
++	cs5535_gpio_class = class_create(THIS_MODULE, "cs5535_gpio");
++	if (IS_ERR(cs5535_gpio_class)) {
++		printk(KERN_ERR "Error creating cs5535_gpio class\n");
++		cdev_del(&cs5535_gpio_cdev);
++		retval = PTR_ERR(cs5535_gpio_class);
++		goto error_region;
++	}
++
++	for (i = 0; i < CS5535_GPIO_COUNT; i++) {
++		if (mask & (1<<i)) {
++			device_create(cs5535_gpio_class, NULL, MKDEV(major, i), NULL, "cs5535_gpio%d", i);
++		}
++	}
+ 
+ 	return 0;
++
++error_region:
++	unregister_chrdev_region(dev_id, CS5535_GPIO_COUNT);
++error:
++	release_region(gpio_base, CS5535_GPIO_SIZE);
++	return retval;
+ }
+ 
+ static void __exit cs5535_gpio_cleanup(void)
+ {
+ 	dev_t dev_id = MKDEV(major, 0);
++	int i;
++
++	for (i = 0; i < CS5535_GPIO_COUNT; i++) {
++		if (mask & (1<<i)) {
++			device_destroy(cs5535_gpio_class, MKDEV(major, i));
++		}
++	}
++
++	class_destroy(cs5535_gpio_class);
+ 
+ 	cdev_del(&cs5535_gpio_cdev);
+ 	unregister_chrdev_region(dev_id, CS5535_GPIO_COUNT);
diff --git a/target/linux/generic/patches-2.6.33/925-modify-i2c-gpio-initcall-level.patch b/target/linux/generic/patches-2.6.33/925-modify-i2c-gpio-initcall-level.patch
new file mode 100644
index 0000000000..1708e33d01
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/925-modify-i2c-gpio-initcall-level.patch
@@ -0,0 +1,11 @@
+--- a/drivers/i2c/busses/i2c-gpio.c
++++ b/drivers/i2c/busses/i2c-gpio.c
+@@ -210,7 +210,7 @@ static int __init i2c_gpio_init(void)
+ 
+ 	return ret;
+ }
+-module_init(i2c_gpio_init);
++subsys_initcall(i2c_gpio_init);
+ 
+ static void __exit i2c_gpio_exit(void)
+ {
diff --git a/target/linux/generic/patches-2.6.33/940-wireless_mesh_header.patch b/target/linux/generic/patches-2.6.33/940-wireless_mesh_header.patch
new file mode 100644
index 0000000000..8fbd2a4dca
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/940-wireless_mesh_header.patch
@@ -0,0 +1,11 @@
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -137,7 +137,7 @@ static inline bool dev_xmit_complete(int
+  */
+ 
+ #if defined(CONFIG_WLAN) || defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
+-# if defined(CONFIG_MAC80211_MESH)
++# if 1 || defined(CONFIG_MAC80211_MESH)
+ #  define LL_MAX_HEADER 128
+ # else
+ #  define LL_MAX_HEADER 96
diff --git a/target/linux/generic/patches-2.6.33/951-revert_gcc4_4_fixes.patch b/target/linux/generic/patches-2.6.33/951-revert_gcc4_4_fixes.patch
new file mode 100644
index 0000000000..d2c76a8f2b
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/951-revert_gcc4_4_fixes.patch
@@ -0,0 +1,524 @@
+--- a/arch/powerpc/boot/crtsavres.S
++++ /dev/null
+@@ -1,233 +0,0 @@
+-/*
+- * Special support for eabi and SVR4
+- *
+- *   Copyright (C) 1995, 1996, 1998, 2000, 2001 Free Software Foundation, Inc.
+- *   Copyright 2008 Freescale Semiconductor, Inc.
+- *   Written By Michael Meissner
+- *
+- * Based on gcc/config/rs6000/crtsavres.asm from gcc
+- *
+- * This file is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License as published by the
+- * Free Software Foundation; either version 2, or (at your option) any
+- * later version.
+- *
+- * In addition to the permissions in the GNU General Public License, the
+- * Free Software Foundation gives you unlimited permission to link the
+- * compiled version of this file with other programs, and to distribute
+- * those programs without any restriction coming from the use of this
+- * file.  (The General Public License restrictions do apply in other
+- * respects; for example, they cover modification of the file, and
+- * distribution when not linked into another program.)
+- *
+- * This file is distributed in the hope that it will be useful, but
+- * WITHOUT ANY WARRANTY; without even the implied warranty of
+- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+- * General Public License for more details.
+- *
+- * You should have received a copy of the GNU General Public License
+- * along with this program; see the file COPYING.  If not, write to
+- * the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+- * Boston, MA 02110-1301, USA.
+- *
+- *    As a special exception, if you link this library with files
+- *    compiled with GCC to produce an executable, this does not cause
+- *    the resulting executable to be covered by the GNU General Public License.
+- *    This exception does not however invalidate any other reasons why
+- *    the executable file might be covered by the GNU General Public License.
+- */
+-
+-	.file	"crtsavres.S"
+-	.section ".text"
+-
+-/* On PowerPC64 Linux, these functions are provided by the linker.  */
+-#ifndef __powerpc64__
+-
+-#define _GLOBAL(name) \
+-	.type name,@function; \
+-	.globl name; \
+-name:
+-
+-/* Routines for saving integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer save area.  */
+-
+-_GLOBAL(_savegpr_14)
+-_GLOBAL(_save32gpr_14)
+-	stw	14,-72(11)	/* save gp registers */
+-_GLOBAL(_savegpr_15)
+-_GLOBAL(_save32gpr_15)
+-	stw	15,-68(11)
+-_GLOBAL(_savegpr_16)
+-_GLOBAL(_save32gpr_16)
+-	stw	16,-64(11)
+-_GLOBAL(_savegpr_17)
+-_GLOBAL(_save32gpr_17)
+-	stw	17,-60(11)
+-_GLOBAL(_savegpr_18)
+-_GLOBAL(_save32gpr_18)
+-	stw	18,-56(11)
+-_GLOBAL(_savegpr_19)
+-_GLOBAL(_save32gpr_19)
+-	stw	19,-52(11)
+-_GLOBAL(_savegpr_20)
+-_GLOBAL(_save32gpr_20)
+-	stw	20,-48(11)
+-_GLOBAL(_savegpr_21)
+-_GLOBAL(_save32gpr_21)
+-	stw	21,-44(11)
+-_GLOBAL(_savegpr_22)
+-_GLOBAL(_save32gpr_22)
+-	stw	22,-40(11)
+-_GLOBAL(_savegpr_23)
+-_GLOBAL(_save32gpr_23)
+-	stw	23,-36(11)
+-_GLOBAL(_savegpr_24)
+-_GLOBAL(_save32gpr_24)
+-	stw	24,-32(11)
+-_GLOBAL(_savegpr_25)
+-_GLOBAL(_save32gpr_25)
+-	stw	25,-28(11)
+-_GLOBAL(_savegpr_26)
+-_GLOBAL(_save32gpr_26)
+-	stw	26,-24(11)
+-_GLOBAL(_savegpr_27)
+-_GLOBAL(_save32gpr_27)
+-	stw	27,-20(11)
+-_GLOBAL(_savegpr_28)
+-_GLOBAL(_save32gpr_28)
+-	stw	28,-16(11)
+-_GLOBAL(_savegpr_29)
+-_GLOBAL(_save32gpr_29)
+-	stw	29,-12(11)
+-_GLOBAL(_savegpr_30)
+-_GLOBAL(_save32gpr_30)
+-	stw	30,-8(11)
+-_GLOBAL(_savegpr_31)
+-_GLOBAL(_save32gpr_31)
+-	stw	31,-4(11)
+-	blr
+-
+-/* Routines for restoring integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer restore area.  */
+-
+-_GLOBAL(_restgpr_14)
+-_GLOBAL(_rest32gpr_14)
+-	lwz	14,-72(11)	/* restore gp registers */
+-_GLOBAL(_restgpr_15)
+-_GLOBAL(_rest32gpr_15)
+-	lwz	15,-68(11)
+-_GLOBAL(_restgpr_16)
+-_GLOBAL(_rest32gpr_16)
+-	lwz	16,-64(11)
+-_GLOBAL(_restgpr_17)
+-_GLOBAL(_rest32gpr_17)
+-	lwz	17,-60(11)
+-_GLOBAL(_restgpr_18)
+-_GLOBAL(_rest32gpr_18)
+-	lwz	18,-56(11)
+-_GLOBAL(_restgpr_19)
+-_GLOBAL(_rest32gpr_19)
+-	lwz	19,-52(11)
+-_GLOBAL(_restgpr_20)
+-_GLOBAL(_rest32gpr_20)
+-	lwz	20,-48(11)
+-_GLOBAL(_restgpr_21)
+-_GLOBAL(_rest32gpr_21)
+-	lwz	21,-44(11)
+-_GLOBAL(_restgpr_22)
+-_GLOBAL(_rest32gpr_22)
+-	lwz	22,-40(11)
+-_GLOBAL(_restgpr_23)
+-_GLOBAL(_rest32gpr_23)
+-	lwz	23,-36(11)
+-_GLOBAL(_restgpr_24)
+-_GLOBAL(_rest32gpr_24)
+-	lwz	24,-32(11)
+-_GLOBAL(_restgpr_25)
+-_GLOBAL(_rest32gpr_25)
+-	lwz	25,-28(11)
+-_GLOBAL(_restgpr_26)
+-_GLOBAL(_rest32gpr_26)
+-	lwz	26,-24(11)
+-_GLOBAL(_restgpr_27)
+-_GLOBAL(_rest32gpr_27)
+-	lwz	27,-20(11)
+-_GLOBAL(_restgpr_28)
+-_GLOBAL(_rest32gpr_28)
+-	lwz	28,-16(11)
+-_GLOBAL(_restgpr_29)
+-_GLOBAL(_rest32gpr_29)
+-	lwz	29,-12(11)
+-_GLOBAL(_restgpr_30)
+-_GLOBAL(_rest32gpr_30)
+-	lwz	30,-8(11)
+-_GLOBAL(_restgpr_31)
+-_GLOBAL(_rest32gpr_31)
+-	lwz	31,-4(11)
+-	blr
+-
+-/* Routines for restoring integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer restore area.  */
+-
+-_GLOBAL(_restgpr_14_x)
+-_GLOBAL(_rest32gpr_14_x)
+-	lwz	14,-72(11)	/* restore gp registers */
+-_GLOBAL(_restgpr_15_x)
+-_GLOBAL(_rest32gpr_15_x)
+-	lwz	15,-68(11)
+-_GLOBAL(_restgpr_16_x)
+-_GLOBAL(_rest32gpr_16_x)
+-	lwz	16,-64(11)
+-_GLOBAL(_restgpr_17_x)
+-_GLOBAL(_rest32gpr_17_x)
+-	lwz	17,-60(11)
+-_GLOBAL(_restgpr_18_x)
+-_GLOBAL(_rest32gpr_18_x)
+-	lwz	18,-56(11)
+-_GLOBAL(_restgpr_19_x)
+-_GLOBAL(_rest32gpr_19_x)
+-	lwz	19,-52(11)
+-_GLOBAL(_restgpr_20_x)
+-_GLOBAL(_rest32gpr_20_x)
+-	lwz	20,-48(11)
+-_GLOBAL(_restgpr_21_x)
+-_GLOBAL(_rest32gpr_21_x)
+-	lwz	21,-44(11)
+-_GLOBAL(_restgpr_22_x)
+-_GLOBAL(_rest32gpr_22_x)
+-	lwz	22,-40(11)
+-_GLOBAL(_restgpr_23_x)
+-_GLOBAL(_rest32gpr_23_x)
+-	lwz	23,-36(11)
+-_GLOBAL(_restgpr_24_x)
+-_GLOBAL(_rest32gpr_24_x)
+-	lwz	24,-32(11)
+-_GLOBAL(_restgpr_25_x)
+-_GLOBAL(_rest32gpr_25_x)
+-	lwz	25,-28(11)
+-_GLOBAL(_restgpr_26_x)
+-_GLOBAL(_rest32gpr_26_x)
+-	lwz	26,-24(11)
+-_GLOBAL(_restgpr_27_x)
+-_GLOBAL(_rest32gpr_27_x)
+-	lwz	27,-20(11)
+-_GLOBAL(_restgpr_28_x)
+-_GLOBAL(_rest32gpr_28_x)
+-	lwz	28,-16(11)
+-_GLOBAL(_restgpr_29_x)
+-_GLOBAL(_rest32gpr_29_x)
+-	lwz	29,-12(11)
+-_GLOBAL(_restgpr_30_x)
+-_GLOBAL(_rest32gpr_30_x)
+-	lwz	30,-8(11)
+-_GLOBAL(_restgpr_31_x)
+-_GLOBAL(_rest32gpr_31_x)
+-	lwz	0,4(11)
+-	lwz	31,-4(11)
+-	mtlr	0
+-	mr	1,11
+-	blr
+-#endif
+--- a/arch/powerpc/boot/Makefile
++++ b/arch/powerpc/boot/Makefile
+@@ -60,7 +60,7 @@ libfdtheader := fdt.h libfdt.h libfdt_in
+ $(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o): \
+ 	$(addprefix $(obj)/,$(libfdtheader))
+ 
+-src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
++src-wlib := string.S crt0.S stdio.c main.c \
+ 		$(libfdt) libfdt-wrapper.c \
+ 		ns16550.c serial.c simple_alloc.c div64.S util.S \
+ 		gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
+--- a/arch/powerpc/kernel/prom_init_check.sh
++++ b/arch/powerpc/kernel/prom_init_check.sh
+@@ -48,20 +48,6 @@ do
+ 		fi
+ 	done
+ 
+-	# ignore register save/restore funcitons
+-	if [ "${UNDEF:0:9}" = "_restgpr_" ]; then
+-		OK=1
+-	fi
+-	if [ "${UNDEF:0:11}" = "_rest32gpr_" ]; then
+-		OK=1
+-	fi
+-	if [ "${UNDEF:0:9}" = "_savegpr_" ]; then
+-		OK=1
+-	fi
+-	if [ "${UNDEF:0:11}" = "_save32gpr_" ]; then
+-		OK=1
+-	fi
+-
+ 	if [ $OK -eq 0 ]; then
+ 		ERROR=1
+ 		echo "Error: External symbol '$UNDEF' referenced" \
+--- a/arch/powerpc/lib/crtsavres.S
++++ /dev/null
+@@ -1,229 +0,0 @@
+-/*
+- * Special support for eabi and SVR4
+- *
+- *   Copyright (C) 1995, 1996, 1998, 2000, 2001 Free Software Foundation, Inc.
+- *   Copyright 2008 Freescale Semiconductor, Inc.
+- *   Written By Michael Meissner
+- *
+- * Based on gcc/config/rs6000/crtsavres.asm from gcc
+- *
+- * This file is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License as published by the
+- * Free Software Foundation; either version 2, or (at your option) any
+- * later version.
+- *
+- * In addition to the permissions in the GNU General Public License, the
+- * Free Software Foundation gives you unlimited permission to link the
+- * compiled version of this file with other programs, and to distribute
+- * those programs without any restriction coming from the use of this
+- * file.  (The General Public License restrictions do apply in other
+- * respects; for example, they cover modification of the file, and
+- * distribution when not linked into another program.)
+- *
+- * This file is distributed in the hope that it will be useful, but
+- * WITHOUT ANY WARRANTY; without even the implied warranty of
+- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+- * General Public License for more details.
+- *
+- * You should have received a copy of the GNU General Public License
+- * along with this program; see the file COPYING.  If not, write to
+- * the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+- * Boston, MA 02110-1301, USA.
+- *
+- *    As a special exception, if you link this library with files
+- *    compiled with GCC to produce an executable, this does not cause
+- *    the resulting executable to be covered by the GNU General Public License.
+- *    This exception does not however invalidate any other reasons why
+- *    the executable file might be covered by the GNU General Public License.
+- */
+-
+-#include <asm/ppc_asm.h>
+-
+-	.file	"crtsavres.S"
+-	.section ".text"
+-
+-#ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+-
+-/* Routines for saving integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer save area.  */
+-
+-_GLOBAL(_savegpr_14)
+-_GLOBAL(_save32gpr_14)
+-	stw	14,-72(11)	/* save gp registers */
+-_GLOBAL(_savegpr_15)
+-_GLOBAL(_save32gpr_15)
+-	stw	15,-68(11)
+-_GLOBAL(_savegpr_16)
+-_GLOBAL(_save32gpr_16)
+-	stw	16,-64(11)
+-_GLOBAL(_savegpr_17)
+-_GLOBAL(_save32gpr_17)
+-	stw	17,-60(11)
+-_GLOBAL(_savegpr_18)
+-_GLOBAL(_save32gpr_18)
+-	stw	18,-56(11)
+-_GLOBAL(_savegpr_19)
+-_GLOBAL(_save32gpr_19)
+-	stw	19,-52(11)
+-_GLOBAL(_savegpr_20)
+-_GLOBAL(_save32gpr_20)
+-	stw	20,-48(11)
+-_GLOBAL(_savegpr_21)
+-_GLOBAL(_save32gpr_21)
+-	stw	21,-44(11)
+-_GLOBAL(_savegpr_22)
+-_GLOBAL(_save32gpr_22)
+-	stw	22,-40(11)
+-_GLOBAL(_savegpr_23)
+-_GLOBAL(_save32gpr_23)
+-	stw	23,-36(11)
+-_GLOBAL(_savegpr_24)
+-_GLOBAL(_save32gpr_24)
+-	stw	24,-32(11)
+-_GLOBAL(_savegpr_25)
+-_GLOBAL(_save32gpr_25)
+-	stw	25,-28(11)
+-_GLOBAL(_savegpr_26)
+-_GLOBAL(_save32gpr_26)
+-	stw	26,-24(11)
+-_GLOBAL(_savegpr_27)
+-_GLOBAL(_save32gpr_27)
+-	stw	27,-20(11)
+-_GLOBAL(_savegpr_28)
+-_GLOBAL(_save32gpr_28)
+-	stw	28,-16(11)
+-_GLOBAL(_savegpr_29)
+-_GLOBAL(_save32gpr_29)
+-	stw	29,-12(11)
+-_GLOBAL(_savegpr_30)
+-_GLOBAL(_save32gpr_30)
+-	stw	30,-8(11)
+-_GLOBAL(_savegpr_31)
+-_GLOBAL(_save32gpr_31)
+-	stw	31,-4(11)
+-	blr
+-
+-/* Routines for restoring integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer restore area.  */
+-
+-_GLOBAL(_restgpr_14)
+-_GLOBAL(_rest32gpr_14)
+-	lwz	14,-72(11)	/* restore gp registers */
+-_GLOBAL(_restgpr_15)
+-_GLOBAL(_rest32gpr_15)
+-	lwz	15,-68(11)
+-_GLOBAL(_restgpr_16)
+-_GLOBAL(_rest32gpr_16)
+-	lwz	16,-64(11)
+-_GLOBAL(_restgpr_17)
+-_GLOBAL(_rest32gpr_17)
+-	lwz	17,-60(11)
+-_GLOBAL(_restgpr_18)
+-_GLOBAL(_rest32gpr_18)
+-	lwz	18,-56(11)
+-_GLOBAL(_restgpr_19)
+-_GLOBAL(_rest32gpr_19)
+-	lwz	19,-52(11)
+-_GLOBAL(_restgpr_20)
+-_GLOBAL(_rest32gpr_20)
+-	lwz	20,-48(11)
+-_GLOBAL(_restgpr_21)
+-_GLOBAL(_rest32gpr_21)
+-	lwz	21,-44(11)
+-_GLOBAL(_restgpr_22)
+-_GLOBAL(_rest32gpr_22)
+-	lwz	22,-40(11)
+-_GLOBAL(_restgpr_23)
+-_GLOBAL(_rest32gpr_23)
+-	lwz	23,-36(11)
+-_GLOBAL(_restgpr_24)
+-_GLOBAL(_rest32gpr_24)
+-	lwz	24,-32(11)
+-_GLOBAL(_restgpr_25)
+-_GLOBAL(_rest32gpr_25)
+-	lwz	25,-28(11)
+-_GLOBAL(_restgpr_26)
+-_GLOBAL(_rest32gpr_26)
+-	lwz	26,-24(11)
+-_GLOBAL(_restgpr_27)
+-_GLOBAL(_rest32gpr_27)
+-	lwz	27,-20(11)
+-_GLOBAL(_restgpr_28)
+-_GLOBAL(_rest32gpr_28)
+-	lwz	28,-16(11)
+-_GLOBAL(_restgpr_29)
+-_GLOBAL(_rest32gpr_29)
+-	lwz	29,-12(11)
+-_GLOBAL(_restgpr_30)
+-_GLOBAL(_rest32gpr_30)
+-	lwz	30,-8(11)
+-_GLOBAL(_restgpr_31)
+-_GLOBAL(_rest32gpr_31)
+-	lwz	31,-4(11)
+-	blr
+-
+-/* Routines for restoring integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer restore area.  */
+-
+-_GLOBAL(_restgpr_14_x)
+-_GLOBAL(_rest32gpr_14_x)
+-	lwz	14,-72(11)	/* restore gp registers */
+-_GLOBAL(_restgpr_15_x)
+-_GLOBAL(_rest32gpr_15_x)
+-	lwz	15,-68(11)
+-_GLOBAL(_restgpr_16_x)
+-_GLOBAL(_rest32gpr_16_x)
+-	lwz	16,-64(11)
+-_GLOBAL(_restgpr_17_x)
+-_GLOBAL(_rest32gpr_17_x)
+-	lwz	17,-60(11)
+-_GLOBAL(_restgpr_18_x)
+-_GLOBAL(_rest32gpr_18_x)
+-	lwz	18,-56(11)
+-_GLOBAL(_restgpr_19_x)
+-_GLOBAL(_rest32gpr_19_x)
+-	lwz	19,-52(11)
+-_GLOBAL(_restgpr_20_x)
+-_GLOBAL(_rest32gpr_20_x)
+-	lwz	20,-48(11)
+-_GLOBAL(_restgpr_21_x)
+-_GLOBAL(_rest32gpr_21_x)
+-	lwz	21,-44(11)
+-_GLOBAL(_restgpr_22_x)
+-_GLOBAL(_rest32gpr_22_x)
+-	lwz	22,-40(11)
+-_GLOBAL(_restgpr_23_x)
+-_GLOBAL(_rest32gpr_23_x)
+-	lwz	23,-36(11)
+-_GLOBAL(_restgpr_24_x)
+-_GLOBAL(_rest32gpr_24_x)
+-	lwz	24,-32(11)
+-_GLOBAL(_restgpr_25_x)
+-_GLOBAL(_rest32gpr_25_x)
+-	lwz	25,-28(11)
+-_GLOBAL(_restgpr_26_x)
+-_GLOBAL(_rest32gpr_26_x)
+-	lwz	26,-24(11)
+-_GLOBAL(_restgpr_27_x)
+-_GLOBAL(_rest32gpr_27_x)
+-	lwz	27,-20(11)
+-_GLOBAL(_restgpr_28_x)
+-_GLOBAL(_rest32gpr_28_x)
+-	lwz	28,-16(11)
+-_GLOBAL(_restgpr_29_x)
+-_GLOBAL(_rest32gpr_29_x)
+-	lwz	29,-12(11)
+-_GLOBAL(_restgpr_30_x)
+-_GLOBAL(_rest32gpr_30_x)
+-	lwz	30,-8(11)
+-_GLOBAL(_restgpr_31_x)
+-_GLOBAL(_rest32gpr_31_x)
+-	lwz	0,4(11)
+-	lwz	31,-4(11)
+-	mtlr	0
+-	mr	1,11
+-	blr
+-#endif
+--- a/arch/powerpc/lib/Makefile
++++ b/arch/powerpc/lib/Makefile
+@@ -13,7 +13,7 @@ CFLAGS_REMOVE_feature-fixups.o = -pg
+ 
+ obj-y			:= string.o alloc.o \
+ 			   checksum_$(CONFIG_WORD_SIZE).o
+-obj-$(CONFIG_PPC32)	+= div64.o copy_32.o crtsavres.o
++obj-$(CONFIG_PPC32)	+= div64.o copy_32.o
+ obj-$(CONFIG_HAS_IOMEM)	+= devres.o
+ 
+ obj-$(CONFIG_PPC64)	+= copypage_64.o copyuser_64.o \
+--- a/arch/powerpc/Makefile
++++ b/arch/powerpc/Makefile
+@@ -92,8 +92,6 @@ endif
+ else
+ 	KBUILD_CFLAGS += $(call cc-option,-mtune=power4)
+ endif
+-else
+-LDFLAGS_MODULE	+= arch/powerpc/lib/crtsavres.o
+ endif
+ 
+ ifeq ($(CONFIG_TUNE_CELL),y)
diff --git a/target/linux/generic/patches-2.6.33/970-ocf_kbuild_integration.patch b/target/linux/generic/patches-2.6.33/970-ocf_kbuild_integration.patch
new file mode 100644
index 0000000000..fd304613f7
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/970-ocf_kbuild_integration.patch
@@ -0,0 +1,20 @@
+--- a/crypto/Kconfig
++++ b/crypto/Kconfig
+@@ -826,3 +826,6 @@ config CRYPTO_ANSI_CPRNG
+ source "drivers/crypto/Kconfig"
+ 
+ endif	# if CRYPTO
++
++source "crypto/ocf/Kconfig"
++
+--- a/crypto/Makefile
++++ b/crypto/Makefile
+@@ -85,6 +85,8 @@ obj-$(CONFIG_CRYPTO_ANSI_CPRNG) += ansi_
+ obj-$(CONFIG_CRYPTO_TEST) += tcrypt.o
+ obj-$(CONFIG_CRYPTO_GHASH) += ghash-generic.o
+ 
++obj-$(CONFIG_OCF_OCF) += ocf/
++
+ #
+ # generic algorithms and the async_tx api
+ #
diff --git a/target/linux/generic/patches-2.6.33/971-ocf_20100325.patch b/target/linux/generic/patches-2.6.33/971-ocf_20100325.patch
new file mode 100644
index 0000000000..0b0c1e279c
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/971-ocf_20100325.patch
@@ -0,0 +1,170 @@
+--- a/drivers/char/random.c
++++ b/drivers/char/random.c
+@@ -129,6 +129,9 @@
+  *                                unsigned int value);
+  * 	void add_interrupt_randomness(int irq);
+  *
++ *      void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
++ *      int random_input_wait(void);
++ *
+  * add_input_randomness() uses the input layer interrupt timing, as well as
+  * the event type information from the hardware.
+  *
+@@ -140,6 +143,13 @@
+  * a better measure, since the timing of the disk interrupts are more
+  * unpredictable.
+  *
++ * random_input_words() just provides a raw block of entropy to the input
++ * pool, such as from a hardware entropy generator.
++ *
++ * random_input_wait() suspends the caller until such time as the
++ * entropy pool falls below the write threshold, and returns a count of how
++ * much entropy (in bits) is needed to sustain the pool.
++ *
+  * All of these routines try to estimate how many bits of randomness a
+  * particular randomness source.  They do this by keeping track of the
+  * first and second order deltas of the event timings.
+@@ -714,6 +724,61 @@ void add_disk_randomness(struct gendisk 
+ }
+ #endif
+ 
++/*
++ * random_input_words - add bulk entropy to pool
++ *
++ * @buf: buffer to add
++ * @wordcount: number of __u32 words to add
++ * @ent_count: total amount of entropy (in bits) to credit
++ *
++ * this provides bulk input of entropy to the input pool
++ *
++ */
++void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
++{
++	mix_pool_bytes(&input_pool, buf, wordcount*4);
++
++	credit_entropy_bits(&input_pool, ent_count);
++
++	DEBUG_ENT("crediting %d bits => %d\n",
++		  ent_count, input_pool.entropy_count);
++	/*
++	 * Wake up waiting processes if we have enough
++	 * entropy.
++	 */
++	if (input_pool.entropy_count >= random_read_wakeup_thresh)
++		wake_up_interruptible(&random_read_wait);
++}
++EXPORT_SYMBOL(random_input_words);
++
++/*
++ * random_input_wait - wait until random needs entropy
++ *
++ * this function sleeps until the /dev/random subsystem actually
++ * needs more entropy, and then return the amount of entropy
++ * that it would be nice to have added to the system.
++ */
++int random_input_wait(void)
++{
++	int count;
++
++	wait_event_interruptible(random_write_wait, 
++			 input_pool.entropy_count < random_write_wakeup_thresh);
++
++	count = random_write_wakeup_thresh - input_pool.entropy_count;
++
++        /* likely we got woken up due to a signal */
++	if (count <= 0) count = random_read_wakeup_thresh; 
++
++	DEBUG_ENT("requesting %d bits from input_wait()er %d<%d\n",
++		  count,
++		  input_pool.entropy_count, random_write_wakeup_thresh);
++
++	return count;
++}
++EXPORT_SYMBOL(random_input_wait);
++
++
+ #define EXTRACT_SIZE 10
+ 
+ /*********************************************************************
+--- a/fs/fcntl.c
++++ b/fs/fcntl.c
+@@ -141,6 +141,7 @@ SYSCALL_DEFINE1(dup, unsigned int, filde
+ 	}
+ 	return ret;
+ }
++EXPORT_SYMBOL(sys_dup);
+ 
+ #define SETFL_MASK (O_APPEND | O_NONBLOCK | O_NDELAY | O_DIRECT | O_NOATIME)
+ 
+--- a/include/linux/miscdevice.h
++++ b/include/linux/miscdevice.h
+@@ -12,6 +12,7 @@
+ #define APOLLO_MOUSE_MINOR	7
+ #define PC110PAD_MINOR		9
+ /*#define ADB_MOUSE_MINOR	10	FIXME OBSOLETE */
++#define CRYPTODEV_MINOR		70	/* /dev/crypto */
+ #define WATCHDOG_MINOR		130	/* Watchdog timer     */
+ #define TEMP_MINOR		131	/* Temperature Sensor */
+ #define RTC_MINOR		135
+--- a/include/linux/random.h
++++ b/include/linux/random.h
+@@ -9,6 +9,7 @@
+ 
+ #include <linux/types.h>
+ #include <linux/ioctl.h>
++#include <linux/types.h> /* for __u32 in user space */
+ #include <linux/irqnr.h>
+ 
+ /* ioctl()'s for the random number generator */
+@@ -34,6 +35,30 @@
+ /* Clear the entropy pool and associated counters.  (Superuser only.) */
+ #define RNDCLEARPOOL	_IO( 'R', 0x06 )
+ 
++#ifdef CONFIG_FIPS_RNG
++
++/* Size of seed value - equal to AES blocksize */
++#define AES_BLOCK_SIZE_BYTES	16
++#define SEED_SIZE_BYTES			AES_BLOCK_SIZE_BYTES
++/* Size of AES key */
++#define KEY_SIZE_BYTES		16
++
++/* ioctl() structure used by FIPS 140-2 Tests */
++struct rand_fips_test {
++	unsigned char key[KEY_SIZE_BYTES];			/* Input */
++	unsigned char datetime[SEED_SIZE_BYTES];	/* Input */
++	unsigned char seed[SEED_SIZE_BYTES];		/* Input */
++	unsigned char result[SEED_SIZE_BYTES];		/* Output */
++};
++
++/* FIPS 140-2 RNG Variable Seed Test. (Superuser only.) */
++#define RNDFIPSVST	_IOWR('R', 0x10, struct rand_fips_test)
++
++/* FIPS 140-2 RNG Monte Carlo Test. (Superuser only.) */
++#define RNDFIPSMCT	_IOWR('R', 0x11, struct rand_fips_test)
++
++#endif /* #ifdef CONFIG_FIPS_RNG */
++
+ struct rand_pool_info {
+ 	int	entropy_count;
+ 	int	buf_size;
+@@ -50,6 +75,10 @@ extern void add_input_randomness(unsigne
+ 				 unsigned int value);
+ extern void add_interrupt_randomness(int irq);
+ 
++extern void random_input_words(__u32 *buf, size_t wordcount, int ent_count);
++extern int random_input_wait(void);
++#define HAS_RANDOM_INPUT_WAIT 1
++
+ extern void get_random_bytes(void *buf, int nbytes);
+ void generate_random_uuid(unsigned char uuid_out[16]);
+ 
+--- a/kernel/pid.c
++++ b/kernel/pid.c
+@@ -387,6 +387,7 @@ struct task_struct *find_task_by_vpid(pi
+ {
+ 	return find_task_by_pid_ns(vnr, current->nsproxy->pid_ns);
+ }
++EXPORT_SYMBOL(find_task_by_vpid);
+ 
+ struct pid *get_task_pid(struct task_struct *task, enum pid_type type)
+ {
diff --git a/target/linux/generic/patches-2.6.33/974-ssb_b43_default_on.patch b/target/linux/generic/patches-2.6.33/974-ssb_b43_default_on.patch
new file mode 100644
index 0000000000..3176dcb4d8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/974-ssb_b43_default_on.patch
@@ -0,0 +1,19 @@
+--- a/drivers/ssb/Kconfig
++++ b/drivers/ssb/Kconfig
+@@ -29,6 +29,7 @@ config SSB_SPROM
+ config SSB_BLOCKIO
+ 	bool
+ 	depends on SSB
++	default y
+ 
+ config SSB_PCIHOST_POSSIBLE
+ 	bool
+@@ -49,7 +50,7 @@ config SSB_PCIHOST
+ config SSB_B43_PCI_BRIDGE
+ 	bool
+ 	depends on SSB_PCIHOST
+-	default n
++	default y
+ 
+ config SSB_PCMCIAHOST_POSSIBLE
+ 	bool
diff --git a/target/linux/generic/patches-2.6.33/975-hifn795x-byteswap.patch b/target/linux/generic/patches-2.6.33/975-hifn795x-byteswap.patch
new file mode 100644
index 0000000000..3a37c951ec
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/975-hifn795x-byteswap.patch
@@ -0,0 +1,17 @@
+--- a/drivers/crypto/hifn_795x.c
++++ b/drivers/crypto/hifn_795x.c
+@@ -682,12 +682,12 @@ static inline u32 hifn_read_1(struct hif
+ 
+ static inline void hifn_write_0(struct hifn_device *dev, u32 reg, u32 val)
+ {
+-	writel((__force u32)cpu_to_le32(val), dev->bar[0] + reg);
++	writel(val, dev->bar[0] + reg);
+ }
+ 
+ static inline void hifn_write_1(struct hifn_device *dev, u32 reg, u32 val)
+ {
+-	writel((__force u32)cpu_to_le32(val), dev->bar[1] + reg);
++	writel(val, dev->bar[1] + reg);
+ }
+ 
+ static void hifn_wait_puc(struct hifn_device *dev)
diff --git a/target/linux/generic/patches-2.6.33/975-ssb_update.patch b/target/linux/generic/patches-2.6.33/975-ssb_update.patch
new file mode 100644
index 0000000000..fbc8f517b0
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/975-ssb_update.patch
@@ -0,0 +1,644 @@
+--- a/drivers/ssb/driver_chipcommon.c
++++ b/drivers/ssb/driver_chipcommon.c
+@@ -233,6 +233,8 @@ void ssb_chipcommon_init(struct ssb_chip
+ {
+ 	if (!cc->dev)
+ 		return; /* We don't have a ChipCommon */
++	if (cc->dev->id.revision >= 11)
++		cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
+ 	ssb_pmu_init(cc);
+ 	chipco_powercontrol_init(cc);
+ 	ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
+@@ -370,6 +372,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c
+ {
+ 	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
+ }
++EXPORT_SYMBOL(ssb_chipco_gpio_control);
+ 
+ u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
+ {
+--- a/drivers/ssb/driver_chipcommon_pmu.c
++++ b/drivers/ssb/driver_chipcommon_pmu.c
+@@ -332,6 +332,12 @@ static void ssb_pmu_pll_init(struct ssb_
+ 	case 0x5354:
+ 		ssb_pmu0_pllinit_r0(cc, crystalfreq);
+ 		break;
++	case 0x4322:
++		if (cc->pmu.rev == 2) {
++			chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, 0x0000000A);
++			chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, 0x380005C0);
++		}
++		break;
+ 	default:
+ 		ssb_printk(KERN_ERR PFX
+ 			   "ERROR: PLL init unknown for device %04X\n",
+@@ -417,6 +423,7 @@ static void ssb_pmu_resources_init(struc
+ 
+ 	switch (bus->chip_id) {
+ 	case 0x4312:
++	case 0x4322:
+ 		/* We keep the default settings:
+ 		 * min_msk = 0xCBB
+ 		 * max_msk = 0x7FFFF
+--- a/drivers/ssb/driver_mipscore.c
++++ b/drivers/ssb/driver_mipscore.c
+@@ -270,7 +270,6 @@ void ssb_mipscore_init(struct ssb_mipsco
+ 				set_irq(dev, irq++);
+ 			}
+ 			break;
+-			/* fallthrough */
+ 		case SSB_DEV_PCI:
+ 		case SSB_DEV_ETHERNET:
+ 		case SSB_DEV_ETHERNET_GBIT:
+@@ -281,6 +280,10 @@ void ssb_mipscore_init(struct ssb_mipsco
+ 				set_irq(dev, irq++);
+ 				break;
+ 			}
++			/* fallthrough */
++		case SSB_DEV_EXTIF:
++			set_irq(dev, 0);
++			break;
+ 		}
+ 	}
+ 	ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n");
+--- a/drivers/ssb/driver_pcicore.c
++++ b/drivers/ssb/driver_pcicore.c
+@@ -246,20 +246,12 @@ static struct pci_controller ssb_pcicore
+ 	.pci_ops	= &ssb_pcicore_pciops,
+ 	.io_resource	= &ssb_pcicore_io_resource,
+ 	.mem_resource	= &ssb_pcicore_mem_resource,
+-	.mem_offset	= 0x24000000,
+ };
+ 
+-static u32 ssb_pcicore_pcibus_iobase = 0x100;
+-static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA;
+-
+ /* This function is called when doing a pci_enable_device().
+  * We must first check if the device is a device on the PCI-core bridge. */
+ int ssb_pcicore_plat_dev_init(struct pci_dev *d)
+ {
+-	struct resource *res;
+-	int pos, size;
+-	u32 *base;
+-
+ 	if (d->bus->ops != &ssb_pcicore_pciops) {
+ 		/* This is not a device on the PCI-core bridge. */
+ 		return -ENODEV;
+@@ -268,27 +260,6 @@ int ssb_pcicore_plat_dev_init(struct pci
+ 	ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
+ 		   pci_name(d));
+ 
+-	/* Fix up resource bases */
+-	for (pos = 0; pos < 6; pos++) {
+-		res = &d->resource[pos];
+-		if (res->flags & IORESOURCE_IO)
+-			base = &ssb_pcicore_pcibus_iobase;
+-		else
+-			base = &ssb_pcicore_pcibus_membase;
+-		res->flags |= IORESOURCE_PCI_FIXED;
+-		if (res->end) {
+-			size = res->end - res->start + 1;
+-			if (*base & (size - 1))
+-				*base = (*base + size) & ~(size - 1);
+-			res->start = *base;
+-			res->end = res->start + size - 1;
+-			*base += size;
+-			pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
+-		}
+-		/* Fix up PCI bridge BAR0 only */
+-		if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0)
+-			break;
+-	}
+ 	/* Fix up interrupt lines */
+ 	d->irq = ssb_mips_irq(extpci_core->dev) + 2;
+ 	pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
+--- a/drivers/ssb/main.c
++++ b/drivers/ssb/main.c
+@@ -833,6 +833,9 @@ int ssb_bus_pcibus_register(struct ssb_b
+ 	if (!err) {
+ 		ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+ 			   "PCI device %s\n", dev_name(&host_pci->dev));
++	} else {
++		ssb_printk(KERN_ERR PFX "Failed to register PCI version"
++			   " of SSB with error %d\n", err);
+ 	}
+ 
+ 	return err;
+--- a/drivers/ssb/pci.c
++++ b/drivers/ssb/pci.c
+@@ -167,7 +167,7 @@ err_pci:
+ }
+ 
+ /* Get the word-offset for a SSB_SPROM_XXX define. */
+-#define SPOFF(offset)	(((offset) - SSB_SPROM_BASE) / sizeof(u16))
++#define SPOFF(offset)	((offset) / sizeof(u16))
+ /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
+ #define SPEX16(_outvar, _offset, _mask, _shift)	\
+ 	out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
+@@ -253,7 +253,7 @@ static int sprom_do_read(struct ssb_bus 
+ 	int i;
+ 
+ 	for (i = 0; i < bus->sprom_size; i++)
+-		sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2));
++		sprom[i] = ioread16(bus->mmio + bus->sprom_offset + (i * 2));
+ 
+ 	return 0;
+ }
+@@ -284,7 +284,7 @@ static int sprom_do_write(struct ssb_bus
+ 			ssb_printk("75%%");
+ 		else if (i % 2)
+ 			ssb_printk(".");
+-		writew(sprom[i], bus->mmio + SSB_SPROM_BASE + (i * 2));
++		writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
+ 		mmiowb();
+ 		msleep(20);
+ 	}
+@@ -620,6 +620,14 @@ static int ssb_pci_sprom_get(struct ssb_
+ 	int err = -ENOMEM;
+ 	u16 *buf;
+ 
++	if (!ssb_is_sprom_available(bus)) {
++		ssb_printk(KERN_ERR PFX "No SPROM available!\n");
++		return -ENODEV;
++	}
++
++	bus->sprom_offset = (bus->chipco.dev->id.revision < 31) ?
++		SSB_SPROM_BASE1 : SSB_SPROM_BASE31;
++
+ 	buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
+ 	if (!buf)
+ 		goto out;
+--- a/drivers/ssb/sprom.c
++++ b/drivers/ssb/sprom.c
+@@ -175,3 +175,17 @@ const struct ssb_sprom *ssb_get_fallback
+ {
+ 	return fallback_sprom;
+ }
++
++/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
++bool ssb_is_sprom_available(struct ssb_bus *bus)
++{
++	/* status register only exists on chipcomon rev >= 11 and we need check
++	   for >= 31 only */
++	/* this routine differs from specs as we do not access SPROM directly
++	   on PCMCIA */
++	if (bus->bustype == SSB_BUSTYPE_PCI &&
++	    bus->chipco.dev->id.revision >= 31)
++		return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM;
++
++	return true;
++}
+--- a/drivers/ssb/ssb_private.h
++++ b/drivers/ssb/ssb_private.h
+@@ -196,7 +196,7 @@ extern int ssb_devices_thaw(struct ssb_f
+ #ifdef CONFIG_SSB_B43_PCI_BRIDGE
+ extern int __init b43_pci_ssb_bridge_init(void);
+ extern void __exit b43_pci_ssb_bridge_exit(void);
+-#else /* CONFIG_SSB_B43_PCI_BRIDGR */
++#else /* CONFIG_SSB_B43_PCI_BRIDGE */
+ static inline int b43_pci_ssb_bridge_init(void)
+ {
+ 	return 0;
+@@ -204,6 +204,6 @@ static inline int b43_pci_ssb_bridge_ini
+ static inline void b43_pci_ssb_bridge_exit(void)
+ {
+ }
+-#endif /* CONFIG_SSB_PCIHOST */
++#endif /* CONFIG_SSB_B43_PCI_BRIDGE */
+ 
+ #endif /* LINUX_SSB_PRIVATE_H_ */
+--- a/include/linux/ssb/ssb.h
++++ b/include/linux/ssb/ssb.h
+@@ -305,6 +305,7 @@ struct ssb_bus {
+ 	/* ID information about the Chip. */
+ 	u16 chip_id;
+ 	u16 chip_rev;
++	u16 sprom_offset;
+ 	u16 sprom_size;		/* number of words in sprom */
+ 	u8 chip_package;
+ 
+@@ -394,6 +395,9 @@ extern int ssb_bus_sdiobus_register(stru
+ 
+ extern void ssb_bus_unregister(struct ssb_bus *bus);
+ 
++/* Does the device have an SPROM? */
++extern bool ssb_is_sprom_available(struct ssb_bus *bus);
++
+ /* Set a fallback SPROM.
+  * See kdoc at the function definition for complete documentation. */
+ extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
+--- a/include/linux/ssb/ssb_driver_chipcommon.h
++++ b/include/linux/ssb/ssb_driver_chipcommon.h
+@@ -53,6 +53,7 @@
+ #define  SSB_CHIPCO_CAP_64BIT		0x08000000	/* 64-bit Backplane */
+ #define  SSB_CHIPCO_CAP_PMU		0x10000000	/* PMU available (rev >= 20) */
+ #define  SSB_CHIPCO_CAP_ECI		0x20000000	/* ECI available (rev >= 20) */
++#define  SSB_CHIPCO_CAP_SPROM		0x40000000	/* SPROM present */
+ #define SSB_CHIPCO_CORECTL		0x0008
+ #define  SSB_CHIPCO_CORECTL_UARTCLK0	0x00000001	/* Drive UART with internal clock */
+ #define	 SSB_CHIPCO_CORECTL_SE		0x00000002	/* sync clk out enable (corerev >= 3) */
+@@ -385,6 +386,7 @@
+ 
+ 
+ /** Chip specific Chip-Status register contents. */
++#define SSB_CHIPCO_CHST_4322_SPROM_EXISTS	0x00000040 /* SPROM present */
+ #define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL	0x00000003
+ #define SSB_CHIPCO_CHST_4325_DEFCIS_SEL		0 /* OTP is powered up, use def. CIS, no SPROM */
+ #define SSB_CHIPCO_CHST_4325_SPROM_SEL		1 /* OTP is powered up, SPROM is present */
+@@ -398,6 +400,18 @@
+ #define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT	4
+ #define SSB_CHIPCO_CHST_4325_PMUTOP_2B 		0x00000200 /* 1 for 2b, 0 for to 2a */
+ 
++/** Macros to determine SPROM presence based on Chip-Status register. */
++#define SSB_CHIPCO_CHST_4312_SPROM_PRESENT(status) \
++	((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
++		SSB_CHIPCO_CHST_4325_OTP_SEL)
++#define SSB_CHIPCO_CHST_4322_SPROM_PRESENT(status) \
++	(status & SSB_CHIPCO_CHST_4322_SPROM_EXISTS)
++#define SSB_CHIPCO_CHST_4325_SPROM_PRESENT(status) \
++	(((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
++		SSB_CHIPCO_CHST_4325_DEFCIS_SEL) && \
++	 ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
++		SSB_CHIPCO_CHST_4325_OTP_SEL))
++
+ 
+ 
+ /** Clockcontrol masks and values **/
+@@ -564,6 +578,7 @@ struct ssb_chipcommon_pmu {
+ struct ssb_chipcommon {
+ 	struct ssb_device *dev;
+ 	u32 capabilities;
++	u32 status;
+ 	/* Fast Powerup Delay constant */
+ 	u16 fast_pwrup_delay;
+ 	struct ssb_chipcommon_pmu pmu;
+--- a/include/linux/ssb/ssb_regs.h
++++ b/include/linux/ssb/ssb_regs.h
+@@ -170,26 +170,27 @@
+ #define SSB_SPROMSIZE_WORDS_R4		220
+ #define SSB_SPROMSIZE_BYTES_R123	(SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
+ #define SSB_SPROMSIZE_BYTES_R4		(SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
+-#define SSB_SPROM_BASE			0x1000
+-#define SSB_SPROM_REVISION		0x107E
++#define SSB_SPROM_BASE1			0x1000
++#define SSB_SPROM_BASE31		0x0800
++#define SSB_SPROM_REVISION		0x007E
+ #define  SSB_SPROM_REVISION_REV		0x00FF	/* SPROM Revision number */
+ #define  SSB_SPROM_REVISION_CRC		0xFF00	/* SPROM CRC8 value */
+ #define  SSB_SPROM_REVISION_CRC_SHIFT	8
+ 
+ /* SPROM Revision 1 */
+-#define SSB_SPROM1_SPID			0x1004	/* Subsystem Product ID for PCI */
+-#define SSB_SPROM1_SVID			0x1006	/* Subsystem Vendor ID for PCI */
+-#define SSB_SPROM1_PID			0x1008	/* Product ID for PCI */
+-#define SSB_SPROM1_IL0MAC		0x1048	/* 6 bytes MAC address for 802.11b/g */
+-#define SSB_SPROM1_ET0MAC		0x104E	/* 6 bytes MAC address for Ethernet */
+-#define SSB_SPROM1_ET1MAC		0x1054	/* 6 bytes MAC address for 802.11a */
+-#define SSB_SPROM1_ETHPHY		0x105A	/* Ethernet PHY settings */
++#define SSB_SPROM1_SPID			0x0004	/* Subsystem Product ID for PCI */
++#define SSB_SPROM1_SVID			0x0006	/* Subsystem Vendor ID for PCI */
++#define SSB_SPROM1_PID			0x0008	/* Product ID for PCI */
++#define SSB_SPROM1_IL0MAC		0x0048	/* 6 bytes MAC address for 802.11b/g */
++#define SSB_SPROM1_ET0MAC		0x004E	/* 6 bytes MAC address for Ethernet */
++#define SSB_SPROM1_ET1MAC		0x0054	/* 6 bytes MAC address for 802.11a */
++#define SSB_SPROM1_ETHPHY		0x005A	/* Ethernet PHY settings */
+ #define  SSB_SPROM1_ETHPHY_ET0A		0x001F	/* MII Address for enet0 */
+ #define  SSB_SPROM1_ETHPHY_ET1A		0x03E0	/* MII Address for enet1 */
+ #define  SSB_SPROM1_ETHPHY_ET1A_SHIFT	5
+ #define  SSB_SPROM1_ETHPHY_ET0M		(1<<14)	/* MDIO for enet0 */
+ #define  SSB_SPROM1_ETHPHY_ET1M		(1<<15)	/* MDIO for enet1 */
+-#define SSB_SPROM1_BINF			0x105C	/* Board info */
++#define SSB_SPROM1_BINF			0x005C	/* Board info */
+ #define  SSB_SPROM1_BINF_BREV		0x00FF	/* Board Revision */
+ #define  SSB_SPROM1_BINF_CCODE		0x0F00	/* Country Code */
+ #define  SSB_SPROM1_BINF_CCODE_SHIFT	8
+@@ -197,63 +198,63 @@
+ #define  SSB_SPROM1_BINF_ANTBG_SHIFT	12
+ #define  SSB_SPROM1_BINF_ANTA		0xC000	/* Available A-PHY antennas */
+ #define  SSB_SPROM1_BINF_ANTA_SHIFT	14
+-#define SSB_SPROM1_PA0B0		0x105E
+-#define SSB_SPROM1_PA0B1		0x1060
+-#define SSB_SPROM1_PA0B2		0x1062
+-#define SSB_SPROM1_GPIOA		0x1064	/* General Purpose IO pins 0 and 1 */
++#define SSB_SPROM1_PA0B0		0x005E
++#define SSB_SPROM1_PA0B1		0x0060
++#define SSB_SPROM1_PA0B2		0x0062
++#define SSB_SPROM1_GPIOA		0x0064	/* General Purpose IO pins 0 and 1 */
+ #define  SSB_SPROM1_GPIOA_P0		0x00FF	/* Pin 0 */
+ #define  SSB_SPROM1_GPIOA_P1		0xFF00	/* Pin 1 */
+ #define  SSB_SPROM1_GPIOA_P1_SHIFT	8
+-#define SSB_SPROM1_GPIOB		0x1066	/* General Purpuse IO pins 2 and 3 */
++#define SSB_SPROM1_GPIOB		0x0066	/* General Purpuse IO pins 2 and 3 */
+ #define  SSB_SPROM1_GPIOB_P2		0x00FF	/* Pin 2 */
+ #define  SSB_SPROM1_GPIOB_P3		0xFF00	/* Pin 3 */
+ #define  SSB_SPROM1_GPIOB_P3_SHIFT	8
+-#define SSB_SPROM1_MAXPWR		0x1068	/* Power Amplifier Max Power */
++#define SSB_SPROM1_MAXPWR		0x0068	/* Power Amplifier Max Power */
+ #define  SSB_SPROM1_MAXPWR_BG		0x00FF	/* B-PHY and G-PHY (in dBm Q5.2) */
+ #define  SSB_SPROM1_MAXPWR_A		0xFF00	/* A-PHY (in dBm Q5.2) */
+ #define  SSB_SPROM1_MAXPWR_A_SHIFT	8
+-#define SSB_SPROM1_PA1B0		0x106A
+-#define SSB_SPROM1_PA1B1		0x106C
+-#define SSB_SPROM1_PA1B2		0x106E
+-#define SSB_SPROM1_ITSSI		0x1070	/* Idle TSSI Target */
++#define SSB_SPROM1_PA1B0		0x006A
++#define SSB_SPROM1_PA1B1		0x006C
++#define SSB_SPROM1_PA1B2		0x006E
++#define SSB_SPROM1_ITSSI		0x0070	/* Idle TSSI Target */
+ #define  SSB_SPROM1_ITSSI_BG		0x00FF	/* B-PHY and G-PHY*/
+ #define  SSB_SPROM1_ITSSI_A		0xFF00	/* A-PHY */
+ #define  SSB_SPROM1_ITSSI_A_SHIFT	8
+-#define SSB_SPROM1_BFLLO		0x1072	/* Boardflags (low 16 bits) */
+-#define SSB_SPROM1_AGAIN		0x1074	/* Antenna Gain (in dBm Q5.2) */
++#define SSB_SPROM1_BFLLO		0x0072	/* Boardflags (low 16 bits) */
++#define SSB_SPROM1_AGAIN		0x0074	/* Antenna Gain (in dBm Q5.2) */
+ #define  SSB_SPROM1_AGAIN_BG		0x00FF	/* B-PHY and G-PHY */
+ #define  SSB_SPROM1_AGAIN_BG_SHIFT	0
+ #define  SSB_SPROM1_AGAIN_A		0xFF00	/* A-PHY */
+ #define  SSB_SPROM1_AGAIN_A_SHIFT	8
+ 
+ /* SPROM Revision 2 (inherits from rev 1) */
+-#define SSB_SPROM2_BFLHI		0x1038	/* Boardflags (high 16 bits) */
+-#define SSB_SPROM2_MAXP_A		0x103A	/* A-PHY Max Power */
++#define SSB_SPROM2_BFLHI		0x0038	/* Boardflags (high 16 bits) */
++#define SSB_SPROM2_MAXP_A		0x003A	/* A-PHY Max Power */
+ #define  SSB_SPROM2_MAXP_A_HI		0x00FF	/* Max Power High */
+ #define  SSB_SPROM2_MAXP_A_LO		0xFF00	/* Max Power Low */
+ #define  SSB_SPROM2_MAXP_A_LO_SHIFT	8
+-#define SSB_SPROM2_PA1LOB0		0x103C	/* A-PHY PowerAmplifier Low Settings */
+-#define SSB_SPROM2_PA1LOB1		0x103E	/* A-PHY PowerAmplifier Low Settings */
+-#define SSB_SPROM2_PA1LOB2		0x1040	/* A-PHY PowerAmplifier Low Settings */
+-#define SSB_SPROM2_PA1HIB0		0x1042	/* A-PHY PowerAmplifier High Settings */
+-#define SSB_SPROM2_PA1HIB1		0x1044	/* A-PHY PowerAmplifier High Settings */
+-#define SSB_SPROM2_PA1HIB2		0x1046	/* A-PHY PowerAmplifier High Settings */
+-#define SSB_SPROM2_OPO			0x1078	/* OFDM Power Offset from CCK Level */
++#define SSB_SPROM2_PA1LOB0		0x003C	/* A-PHY PowerAmplifier Low Settings */
++#define SSB_SPROM2_PA1LOB1		0x003E	/* A-PHY PowerAmplifier Low Settings */
++#define SSB_SPROM2_PA1LOB2		0x0040	/* A-PHY PowerAmplifier Low Settings */
++#define SSB_SPROM2_PA1HIB0		0x0042	/* A-PHY PowerAmplifier High Settings */
++#define SSB_SPROM2_PA1HIB1		0x0044	/* A-PHY PowerAmplifier High Settings */
++#define SSB_SPROM2_PA1HIB2		0x0046	/* A-PHY PowerAmplifier High Settings */
++#define SSB_SPROM2_OPO			0x0078	/* OFDM Power Offset from CCK Level */
+ #define  SSB_SPROM2_OPO_VALUE		0x00FF
+ #define  SSB_SPROM2_OPO_UNUSED		0xFF00
+-#define SSB_SPROM2_CCODE		0x107C	/* Two char Country Code */
++#define SSB_SPROM2_CCODE		0x007C	/* Two char Country Code */
+ 
+ /* SPROM Revision 3 (inherits most data from rev 2) */
+-#define SSB_SPROM3_IL0MAC		0x104A	/* 6 bytes MAC address for 802.11b/g */
+-#define SSB_SPROM3_OFDMAPO		0x102C	/* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
+-#define SSB_SPROM3_OFDMALPO		0x1030	/* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
+-#define SSB_SPROM3_OFDMAHPO		0x1034	/* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
+-#define SSB_SPROM3_GPIOLDC		0x1042	/* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
++#define SSB_SPROM3_OFDMAPO		0x002C	/* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
++#define SSB_SPROM3_OFDMALPO		0x0030	/* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
++#define SSB_SPROM3_OFDMAHPO		0x0034	/* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
++#define SSB_SPROM3_GPIOLDC		0x0042	/* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
+ #define  SSB_SPROM3_GPIOLDC_OFF		0x0000FF00	/* Off Count */
+ #define  SSB_SPROM3_GPIOLDC_OFF_SHIFT	8
+ #define  SSB_SPROM3_GPIOLDC_ON		0x00FF0000	/* On Count */
+ #define  SSB_SPROM3_GPIOLDC_ON_SHIFT	16
+-#define SSB_SPROM3_CCKPO		0x1078	/* CCK Power Offset */
++#define SSB_SPROM3_IL0MAC		0x004A	/* 6 bytes MAC address for 802.11b/g */
++#define SSB_SPROM3_CCKPO		0x0078	/* CCK Power Offset */
+ #define  SSB_SPROM3_CCKPO_1M		0x000F	/* 1M Rate PO */
+ #define  SSB_SPROM3_CCKPO_2M		0x00F0	/* 2M Rate PO */
+ #define  SSB_SPROM3_CCKPO_2M_SHIFT	4
+@@ -264,100 +265,100 @@
+ #define  SSB_SPROM3_OFDMGPO		0x107A	/* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
+ 
+ /* SPROM Revision 4 */
+-#define SSB_SPROM4_IL0MAC		0x104C	/* 6 byte MAC address for a/b/g/n */
+-#define SSB_SPROM4_ETHPHY		0x105A	/* Ethernet PHY settings ?? */
++#define SSB_SPROM4_BFLLO		0x0044	/* Boardflags (low 16 bits) */
++#define SSB_SPROM4_BFLHI		0x0046  /* Board Flags Hi */
++#define SSB_SPROM4_IL0MAC		0x004C	/* 6 byte MAC address for a/b/g/n */
++#define SSB_SPROM4_CCODE		0x0052	/* Country Code (2 bytes) */
++#define SSB_SPROM4_GPIOA		0x0056	/* Gen. Purpose IO # 0 and 1 */
++#define  SSB_SPROM4_GPIOA_P0		0x00FF	/* Pin 0 */
++#define  SSB_SPROM4_GPIOA_P1		0xFF00	/* Pin 1 */
++#define  SSB_SPROM4_GPIOA_P1_SHIFT	8
++#define SSB_SPROM4_GPIOB		0x0058	/* Gen. Purpose IO # 2 and 3 */
++#define  SSB_SPROM4_GPIOB_P2		0x00FF	/* Pin 2 */
++#define  SSB_SPROM4_GPIOB_P3		0xFF00	/* Pin 3 */
++#define  SSB_SPROM4_GPIOB_P3_SHIFT	8
++#define SSB_SPROM4_ETHPHY		0x005A	/* Ethernet PHY settings ?? */
+ #define  SSB_SPROM4_ETHPHY_ET0A		0x001F	/* MII Address for enet0 */
+ #define  SSB_SPROM4_ETHPHY_ET1A		0x03E0	/* MII Address for enet1 */
+ #define  SSB_SPROM4_ETHPHY_ET1A_SHIFT	5
+ #define  SSB_SPROM4_ETHPHY_ET0M		(1<<14)	/* MDIO for enet0 */
+ #define  SSB_SPROM4_ETHPHY_ET1M		(1<<15)	/* MDIO for enet1 */
+-#define SSB_SPROM4_CCODE		0x1052	/* Country Code (2 bytes) */
+-#define SSB_SPROM4_ANTAVAIL		0x105D  /* Antenna available bitfields */
+-#define SSB_SPROM4_ANTAVAIL_A		0x00FF	/* A-PHY bitfield */
+-#define SSB_SPROM4_ANTAVAIL_A_SHIFT	0
+-#define SSB_SPROM4_ANTAVAIL_BG		0xFF00	/* B-PHY and G-PHY bitfield */
+-#define SSB_SPROM4_ANTAVAIL_BG_SHIFT	8
+-#define SSB_SPROM4_BFLLO		0x1044	/* Boardflags (low 16 bits) */
+-#define SSB_SPROM4_AGAIN01		0x105E	/* Antenna Gain (in dBm Q5.2) */
++#define SSB_SPROM4_ANTAVAIL		0x005D  /* Antenna available bitfields */
++#define  SSB_SPROM4_ANTAVAIL_A		0x00FF	/* A-PHY bitfield */
++#define  SSB_SPROM4_ANTAVAIL_A_SHIFT	0
++#define  SSB_SPROM4_ANTAVAIL_BG		0xFF00	/* B-PHY and G-PHY bitfield */
++#define  SSB_SPROM4_ANTAVAIL_BG_SHIFT	8
++#define SSB_SPROM4_AGAIN01		0x005E	/* Antenna Gain (in dBm Q5.2) */
+ #define  SSB_SPROM4_AGAIN0		0x00FF	/* Antenna 0 */
+ #define  SSB_SPROM4_AGAIN0_SHIFT	0
+ #define  SSB_SPROM4_AGAIN1		0xFF00	/* Antenna 1 */
+ #define  SSB_SPROM4_AGAIN1_SHIFT	8
+-#define SSB_SPROM4_AGAIN23		0x1060
++#define SSB_SPROM4_AGAIN23		0x0060
+ #define  SSB_SPROM4_AGAIN2		0x00FF	/* Antenna 2 */
+ #define  SSB_SPROM4_AGAIN2_SHIFT	0
+ #define  SSB_SPROM4_AGAIN3		0xFF00	/* Antenna 3 */
+ #define  SSB_SPROM4_AGAIN3_SHIFT	8
+-#define SSB_SPROM4_BFLHI		0x1046  /* Board Flags Hi */
+-#define SSB_SPROM4_MAXP_BG		0x1080  /* Max Power BG in path 1 */
++#define SSB_SPROM4_MAXP_BG		0x0080  /* Max Power BG in path 1 */
+ #define  SSB_SPROM4_MAXP_BG_MASK	0x00FF  /* Mask for Max Power BG */
+ #define  SSB_SPROM4_ITSSI_BG		0xFF00	/* Mask for path 1 itssi_bg */
+ #define  SSB_SPROM4_ITSSI_BG_SHIFT	8
+-#define SSB_SPROM4_MAXP_A		0x108A  /* Max Power A in path 1 */
++#define SSB_SPROM4_MAXP_A		0x008A  /* Max Power A in path 1 */
+ #define  SSB_SPROM4_MAXP_A_MASK		0x00FF  /* Mask for Max Power A */
+ #define  SSB_SPROM4_ITSSI_A		0xFF00	/* Mask for path 1 itssi_a */
+ #define  SSB_SPROM4_ITSSI_A_SHIFT	8
+-#define SSB_SPROM4_GPIOA		0x1056	/* Gen. Purpose IO # 0 and 1 */
+-#define  SSB_SPROM4_GPIOA_P0		0x00FF	/* Pin 0 */
+-#define  SSB_SPROM4_GPIOA_P1		0xFF00	/* Pin 1 */
+-#define  SSB_SPROM4_GPIOA_P1_SHIFT	8
+-#define SSB_SPROM4_GPIOB		0x1058	/* Gen. Purpose IO # 2 and 3 */
+-#define  SSB_SPROM4_GPIOB_P2		0x00FF	/* Pin 2 */
+-#define  SSB_SPROM4_GPIOB_P3		0xFF00	/* Pin 3 */
+-#define  SSB_SPROM4_GPIOB_P3_SHIFT	8
+-#define SSB_SPROM4_PA0B0		0x1082	/* The paXbY locations are */
+-#define SSB_SPROM4_PA0B1		0x1084	/*   only guesses */
+-#define SSB_SPROM4_PA0B2		0x1086
+-#define SSB_SPROM4_PA1B0		0x108E
+-#define SSB_SPROM4_PA1B1		0x1090
+-#define SSB_SPROM4_PA1B2		0x1092
++#define SSB_SPROM4_PA0B0		0x0082	/* The paXbY locations are */
++#define SSB_SPROM4_PA0B1		0x0084	/*   only guesses */
++#define SSB_SPROM4_PA0B2		0x0086
++#define SSB_SPROM4_PA1B0		0x008E
++#define SSB_SPROM4_PA1B1		0x0090
++#define SSB_SPROM4_PA1B2		0x0092
+ 
+ /* SPROM Revision 5 (inherits most data from rev 4) */
+-#define SSB_SPROM5_BFLLO		0x104A	/* Boardflags (low 16 bits) */
+-#define SSB_SPROM5_BFLHI		0x104C  /* Board Flags Hi */
+-#define SSB_SPROM5_IL0MAC		0x1052	/* 6 byte MAC address for a/b/g/n */
+-#define SSB_SPROM5_CCODE		0x1044	/* Country Code (2 bytes) */
+-#define SSB_SPROM5_GPIOA		0x1076	/* Gen. Purpose IO # 0 and 1 */
++#define SSB_SPROM5_CCODE		0x0044	/* Country Code (2 bytes) */
++#define SSB_SPROM5_BFLLO		0x004A	/* Boardflags (low 16 bits) */
++#define SSB_SPROM5_BFLHI		0x004C  /* Board Flags Hi */
++#define SSB_SPROM5_IL0MAC		0x0052	/* 6 byte MAC address for a/b/g/n */
++#define SSB_SPROM5_GPIOA		0x0076	/* Gen. Purpose IO # 0 and 1 */
+ #define  SSB_SPROM5_GPIOA_P0		0x00FF	/* Pin 0 */
+ #define  SSB_SPROM5_GPIOA_P1		0xFF00	/* Pin 1 */
+ #define  SSB_SPROM5_GPIOA_P1_SHIFT	8
+-#define SSB_SPROM5_GPIOB		0x1078	/* Gen. Purpose IO # 2 and 3 */
++#define SSB_SPROM5_GPIOB		0x0078	/* Gen. Purpose IO # 2 and 3 */
+ #define  SSB_SPROM5_GPIOB_P2		0x00FF	/* Pin 2 */
+ #define  SSB_SPROM5_GPIOB_P3		0xFF00	/* Pin 3 */
+ #define  SSB_SPROM5_GPIOB_P3_SHIFT	8
+ 
+ /* SPROM Revision 8 */
+-#define SSB_SPROM8_BOARDREV		0x1082	/* Board revision */
+-#define SSB_SPROM8_BFLLO		0x1084	/* Board flags (bits 0-15) */
+-#define SSB_SPROM8_BFLHI		0x1086	/* Board flags (bits 16-31) */
+-#define SSB_SPROM8_BFL2LO		0x1088	/* Board flags (bits 32-47) */
+-#define SSB_SPROM8_BFL2HI		0x108A	/* Board flags (bits 48-63) */
+-#define SSB_SPROM8_IL0MAC		0x108C	/* 6 byte MAC address */
+-#define SSB_SPROM8_CCODE		0x1092	/* 2 byte country code */
+-#define SSB_SPROM8_ANTAVAIL		0x109C  /* Antenna available bitfields*/
+-#define SSB_SPROM8_ANTAVAIL_A		0xFF00	/* A-PHY bitfield */
+-#define SSB_SPROM8_ANTAVAIL_A_SHIFT	8
+-#define SSB_SPROM8_ANTAVAIL_BG		0x00FF	/* B-PHY and G-PHY bitfield */
+-#define SSB_SPROM8_ANTAVAIL_BG_SHIFT	0
+-#define SSB_SPROM8_AGAIN01		0x109E	/* Antenna Gain (in dBm Q5.2) */
++#define SSB_SPROM8_BOARDREV		0x0082	/* Board revision */
++#define SSB_SPROM8_BFLLO		0x0084	/* Board flags (bits 0-15) */
++#define SSB_SPROM8_BFLHI		0x0086	/* Board flags (bits 16-31) */
++#define SSB_SPROM8_BFL2LO		0x0088	/* Board flags (bits 32-47) */
++#define SSB_SPROM8_BFL2HI		0x008A	/* Board flags (bits 48-63) */
++#define SSB_SPROM8_IL0MAC		0x008C	/* 6 byte MAC address */
++#define SSB_SPROM8_CCODE		0x0092	/* 2 byte country code */
++#define SSB_SPROM8_GPIOA		0x0096	/*Gen. Purpose IO # 0 and 1 */
++#define  SSB_SPROM8_GPIOA_P0		0x00FF	/* Pin 0 */
++#define  SSB_SPROM8_GPIOA_P1		0xFF00	/* Pin 1 */
++#define  SSB_SPROM8_GPIOA_P1_SHIFT	8
++#define SSB_SPROM8_GPIOB		0x0098	/* Gen. Purpose IO # 2 and 3 */
++#define  SSB_SPROM8_GPIOB_P2		0x00FF	/* Pin 2 */
++#define  SSB_SPROM8_GPIOB_P3		0xFF00	/* Pin 3 */
++#define  SSB_SPROM8_GPIOB_P3_SHIFT	8
++#define SSB_SPROM8_ANTAVAIL		0x009C  /* Antenna available bitfields*/
++#define  SSB_SPROM8_ANTAVAIL_A		0xFF00	/* A-PHY bitfield */
++#define  SSB_SPROM8_ANTAVAIL_A_SHIFT	8
++#define  SSB_SPROM8_ANTAVAIL_BG		0x00FF	/* B-PHY and G-PHY bitfield */
++#define  SSB_SPROM8_ANTAVAIL_BG_SHIFT	0
++#define SSB_SPROM8_AGAIN01		0x009E	/* Antenna Gain (in dBm Q5.2) */
+ #define  SSB_SPROM8_AGAIN0		0x00FF	/* Antenna 0 */
+ #define  SSB_SPROM8_AGAIN0_SHIFT	0
+ #define  SSB_SPROM8_AGAIN1		0xFF00	/* Antenna 1 */
+ #define  SSB_SPROM8_AGAIN1_SHIFT	8
+-#define SSB_SPROM8_AGAIN23		0x10A0
++#define SSB_SPROM8_AGAIN23		0x00A0
+ #define  SSB_SPROM8_AGAIN2		0x00FF	/* Antenna 2 */
+ #define  SSB_SPROM8_AGAIN2_SHIFT	0
+ #define  SSB_SPROM8_AGAIN3		0xFF00	/* Antenna 3 */
+ #define  SSB_SPROM8_AGAIN3_SHIFT	8
+-#define SSB_SPROM8_GPIOA		0x1096	/*Gen. Purpose IO # 0 and 1 */
+-#define  SSB_SPROM8_GPIOA_P0		0x00FF	/* Pin 0 */
+-#define  SSB_SPROM8_GPIOA_P1		0xFF00	/* Pin 1 */
+-#define  SSB_SPROM8_GPIOA_P1_SHIFT	8
+-#define SSB_SPROM8_GPIOB		0x1098	/* Gen. Purpose IO # 2 and 3 */
+-#define  SSB_SPROM8_GPIOB_P2		0x00FF	/* Pin 2 */
+-#define  SSB_SPROM8_GPIOB_P3		0xFF00	/* Pin 3 */
+-#define  SSB_SPROM8_GPIOB_P3_SHIFT	8
+-#define SSB_SPROM8_RSSIPARM2G		0x10A4	/* RSSI params for 2GHz */
++#define SSB_SPROM8_RSSIPARM2G		0x00A4	/* RSSI params for 2GHz */
+ #define  SSB_SPROM8_RSSISMF2G		0x000F
+ #define  SSB_SPROM8_RSSISMC2G		0x00F0
+ #define  SSB_SPROM8_RSSISMC2G_SHIFT	4
+@@ -365,7 +366,7 @@
+ #define  SSB_SPROM8_RSSISAV2G_SHIFT	8
+ #define  SSB_SPROM8_BXA2G		0x1800
+ #define  SSB_SPROM8_BXA2G_SHIFT		11
+-#define SSB_SPROM8_RSSIPARM5G		0x10A6	/* RSSI params for 5GHz */
++#define SSB_SPROM8_RSSIPARM5G		0x00A6	/* RSSI params for 5GHz */
+ #define  SSB_SPROM8_RSSISMF5G		0x000F
+ #define  SSB_SPROM8_RSSISMC5G		0x00F0
+ #define  SSB_SPROM8_RSSISMC5G_SHIFT	4
+@@ -373,47 +374,47 @@
+ #define  SSB_SPROM8_RSSISAV5G_SHIFT	8
+ #define  SSB_SPROM8_BXA5G		0x1800
+ #define  SSB_SPROM8_BXA5G_SHIFT		11
+-#define SSB_SPROM8_TRI25G		0x10A8	/* TX isolation 2.4&5.3GHz */
++#define SSB_SPROM8_TRI25G		0x00A8	/* TX isolation 2.4&5.3GHz */
+ #define  SSB_SPROM8_TRI2G		0x00FF	/* TX isolation 2.4GHz */
+ #define  SSB_SPROM8_TRI5G		0xFF00	/* TX isolation 5.3GHz */
+ #define  SSB_SPROM8_TRI5G_SHIFT		8
+-#define SSB_SPROM8_TRI5GHL		0x10AA	/* TX isolation 5.2/5.8GHz */
++#define SSB_SPROM8_TRI5GHL		0x00AA	/* TX isolation 5.2/5.8GHz */
+ #define  SSB_SPROM8_TRI5GL		0x00FF	/* TX isolation 5.2GHz */
+ #define  SSB_SPROM8_TRI5GH		0xFF00	/* TX isolation 5.8GHz */
+ #define  SSB_SPROM8_TRI5GH_SHIFT	8
+-#define SSB_SPROM8_RXPO			0x10AC  /* RX power offsets */
++#define SSB_SPROM8_RXPO			0x00AC  /* RX power offsets */
+ #define  SSB_SPROM8_RXPO2G		0x00FF	/* 2GHz RX power offset */
+ #define  SSB_SPROM8_RXPO5G		0xFF00	/* 5GHz RX power offset */
+ #define  SSB_SPROM8_RXPO5G_SHIFT	8
+-#define SSB_SPROM8_MAXP_BG		0x10C0  /* Max Power 2GHz in path 1 */
++#define SSB_SPROM8_MAXP_BG		0x00C0  /* Max Power 2GHz in path 1 */
+ #define  SSB_SPROM8_MAXP_BG_MASK	0x00FF  /* Mask for Max Power 2GHz */
+ #define  SSB_SPROM8_ITSSI_BG		0xFF00	/* Mask for path 1 itssi_bg */
+ #define  SSB_SPROM8_ITSSI_BG_SHIFT	8
+-#define SSB_SPROM8_PA0B0		0x10C2	/* 2GHz power amp settings */
+-#define SSB_SPROM8_PA0B1		0x10C4
+-#define SSB_SPROM8_PA0B2		0x10C6
+-#define SSB_SPROM8_MAXP_A		0x10C8  /* Max Power 5.3GHz */
++#define SSB_SPROM8_PA0B0		0x00C2	/* 2GHz power amp settings */
++#define SSB_SPROM8_PA0B1		0x00C4
++#define SSB_SPROM8_PA0B2		0x00C6
++#define SSB_SPROM8_MAXP_A		0x00C8  /* Max Power 5.3GHz */
+ #define  SSB_SPROM8_MAXP_A_MASK		0x00FF  /* Mask for Max Power 5.3GHz */
+ #define  SSB_SPROM8_ITSSI_A		0xFF00	/* Mask for path 1 itssi_a */
+ #define  SSB_SPROM8_ITSSI_A_SHIFT	8
+-#define SSB_SPROM8_MAXP_AHL		0x10CA  /* Max Power 5.2/5.8GHz */
++#define SSB_SPROM8_MAXP_AHL		0x00CA  /* Max Power 5.2/5.8GHz */
+ #define  SSB_SPROM8_MAXP_AH_MASK	0x00FF  /* Mask for Max Power 5.8GHz */
+ #define  SSB_SPROM8_MAXP_AL_MASK	0xFF00  /* Mask for Max Power 5.2GHz */
+ #define  SSB_SPROM8_MAXP_AL_SHIFT	8
+-#define SSB_SPROM8_PA1B0		0x10CC	/* 5.3GHz power amp settings */
+-#define SSB_SPROM8_PA1B1		0x10CE
+-#define SSB_SPROM8_PA1B2		0x10D0
+-#define SSB_SPROM8_PA1LOB0		0x10D2	/* 5.2GHz power amp settings */
+-#define SSB_SPROM8_PA1LOB1		0x10D4
+-#define SSB_SPROM8_PA1LOB2		0x10D6
+-#define SSB_SPROM8_PA1HIB0		0x10D8	/* 5.8GHz power amp settings */
+-#define SSB_SPROM8_PA1HIB1		0x10DA
+-#define SSB_SPROM8_PA1HIB2		0x10DC
+-#define SSB_SPROM8_CCK2GPO		0x1140	/* CCK power offset */
+-#define SSB_SPROM8_OFDM2GPO		0x1142	/* 2.4GHz OFDM power offset */
+-#define SSB_SPROM8_OFDM5GPO		0x1146	/* 5.3GHz OFDM power offset */
+-#define SSB_SPROM8_OFDM5GLPO		0x114A	/* 5.2GHz OFDM power offset */
+-#define SSB_SPROM8_OFDM5GHPO		0x114E	/* 5.8GHz OFDM power offset */
++#define SSB_SPROM8_PA1B0		0x00CC	/* 5.3GHz power amp settings */
++#define SSB_SPROM8_PA1B1		0x00CE
++#define SSB_SPROM8_PA1B2		0x00D0
++#define SSB_SPROM8_PA1LOB0		0x00D2	/* 5.2GHz power amp settings */
++#define SSB_SPROM8_PA1LOB1		0x00D4
++#define SSB_SPROM8_PA1LOB2		0x00D6
++#define SSB_SPROM8_PA1HIB0		0x00D8	/* 5.8GHz power amp settings */
++#define SSB_SPROM8_PA1HIB1		0x00DA
++#define SSB_SPROM8_PA1HIB2		0x00DC
++#define SSB_SPROM8_CCK2GPO		0x0140	/* CCK power offset */
++#define SSB_SPROM8_OFDM2GPO		0x0142	/* 2.4GHz OFDM power offset */
++#define SSB_SPROM8_OFDM5GPO		0x0146	/* 5.3GHz OFDM power offset */
++#define SSB_SPROM8_OFDM5GLPO		0x014A	/* 5.2GHz OFDM power offset */
++#define SSB_SPROM8_OFDM5GHPO		0x014E	/* 5.8GHz OFDM power offset */
+ 
+ /* Values for SSB_SPROM1_BINF_CCODE */
+ enum {
diff --git a/target/linux/generic/patches-2.6.33/976-ssb_add_dma_dev.patch b/target/linux/generic/patches-2.6.33/976-ssb_add_dma_dev.patch
new file mode 100644
index 0000000000..072df895be
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/976-ssb_add_dma_dev.patch
@@ -0,0 +1,52 @@
+From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
+
+Add dma_dev, a pointer to struct device, to struct ssb_device.  We pass it
+to the generic DMA API with SSB_BUSTYPE_PCI and SSB_BUSTYPE_SSB. 
+ssb_devices_register() sets up it properly.
+
+This is preparation for replacing the ssb bus specific DMA API (ssb_dma_*)
+with the generic DMA API.
+
+Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
+Acked-by: Michael Buesch <mb@bu3sch.de>
+Cc: Gary Zambrano <zambrano@broadcom.com>
+Cc: Stefano Brivio <stefano.brivio@polimi.it>
+Cc: Larry Finger <Larry.Finger@lwfinger.net>
+Cc: John W. Linville <linville@tuxdriver.com>
+Acked-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
+---
+
+ drivers/ssb/main.c      |    2 ++
+ include/linux/ssb/ssb.h |    2 +-
+ 2 files changed, 3 insertions(+), 1 deletion(-)
+
+--- a/drivers/ssb/main.c
++++ b/drivers/ssb/main.c
+@@ -485,6 +485,7 @@ static int ssb_devices_register(struct s
+ #ifdef CONFIG_SSB_PCIHOST
+ 			sdev->irq = bus->host_pci->irq;
+ 			dev->parent = &bus->host_pci->dev;
++			sdev->dma_dev = dev->parent;
+ #endif
+ 			break;
+ 		case SSB_BUSTYPE_PCMCIA:
+@@ -500,6 +501,7 @@ static int ssb_devices_register(struct s
+ 			break;
+ 		case SSB_BUSTYPE_SSB:
+ 			dev->dma_mask = &dev->coherent_dma_mask;
++			sdev->dma_dev = dev;
+ 			break;
+ 		}
+ 
+--- a/include/linux/ssb/ssb.h
++++ b/include/linux/ssb/ssb.h
+@@ -167,7 +167,7 @@ struct ssb_device {
+ 	 * is an optimization. */
+ 	const struct ssb_bus_ops *ops;
+ 
+-	struct device *dev;
++	struct device *dev, *dma_dev;
+ 
+ 	struct ssb_bus *bus;
+ 	struct ssb_device_id id;
diff --git a/target/linux/generic/patches-2.6.33/977-textsearch_kconfig_hacks.patch b/target/linux/generic/patches-2.6.33/977-textsearch_kconfig_hacks.patch
new file mode 100644
index 0000000000..d2e41fe9ab
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/977-textsearch_kconfig_hacks.patch
@@ -0,0 +1,23 @@
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -158,16 +158,16 @@ config REED_SOLOMON_DEC16
+ # Textsearch support is select'ed if needed
+ #
+ config TEXTSEARCH
+-	boolean
++	boolean	"Textsearch support"
+ 
+ config TEXTSEARCH_KMP
+-	tristate
++	tristate "Textsearch KMP"
+ 
+ config TEXTSEARCH_BM
+-	tristate
++	tristate "Textsearch BM"
+ 
+ config TEXTSEARCH_FSM
+-	tristate
++	tristate "Textsearch FSM"
+ 
+ config HAS_IOMEM
+ 	boolean
diff --git a/target/linux/generic/patches-2.6.33/978-lib80211_kconfig_hacks.patch b/target/linux/generic/patches-2.6.33/978-lib80211_kconfig_hacks.patch
new file mode 100644
index 0000000000..05bb838c19
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/978-lib80211_kconfig_hacks.patch
@@ -0,0 +1,19 @@
+--- a/net/wireless/Kconfig
++++ b/net/wireless/Kconfig
+@@ -141,13 +141,13 @@ config LIB80211
+ 	  you want this built into your kernel.
+ 
+ config LIB80211_CRYPT_WEP
+-	tristate
++	tristate "LIB80211_CRYPT_WEP"
+ 
+ config LIB80211_CRYPT_CCMP
+-	tristate
++	tristate "LIB80211_CRYPT_CCMP"
+ 
+ config LIB80211_CRYPT_TKIP
+-	tristate
++	tristate "LIB80211_CRYPT_TKIP"
+ 
+ config LIB80211_DEBUG
+ 	bool "lib80211 debugging messages"
diff --git a/target/linux/generic/patches-2.6.33/979-crypto_add_kconfig_prompts.patch b/target/linux/generic/patches-2.6.33/979-crypto_add_kconfig_prompts.patch
new file mode 100644
index 0000000000..b40b2cea96
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/979-crypto_add_kconfig_prompts.patch
@@ -0,0 +1,47 @@
+--- a/crypto/Kconfig
++++ b/crypto/Kconfig
+@@ -32,7 +32,7 @@ config CRYPTO_FIPS
+ 	  option is selected
+ 
+ config CRYPTO_ALGAPI
+-	tristate
++	tristate "ALGAPI"
+ 	select CRYPTO_ALGAPI2
+ 	help
+ 	  This option provides the API for cryptographic algorithms.
+@@ -41,7 +41,7 @@ config CRYPTO_ALGAPI2
+ 	tristate
+ 
+ config CRYPTO_AEAD
+-	tristate
++	tristate "AEAD"
+ 	select CRYPTO_AEAD2
+ 	select CRYPTO_ALGAPI
+ 
+@@ -50,7 +50,7 @@ config CRYPTO_AEAD2
+ 	select CRYPTO_ALGAPI2
+ 
+ config CRYPTO_BLKCIPHER
+-	tristate
++	tristate "BLKCIPHER"
+ 	select CRYPTO_BLKCIPHER2
+ 	select CRYPTO_ALGAPI
+ 
+@@ -61,7 +61,7 @@ config CRYPTO_BLKCIPHER2
+ 	select CRYPTO_WORKQUEUE
+ 
+ config CRYPTO_HASH
+-	tristate
++	tristate "HASH"
+ 	select CRYPTO_HASH2
+ 	select CRYPTO_ALGAPI
+ 
+@@ -70,7 +70,7 @@ config CRYPTO_HASH2
+ 	select CRYPTO_ALGAPI2
+ 
+ config CRYPTO_RNG
+-	tristate
++	tristate "RNG"
+ 	select CRYPTO_RNG2
+ 	select CRYPTO_ALGAPI
+ 
diff --git a/target/linux/generic/patches-2.6.33/980-vm_exports.patch b/target/linux/generic/patches-2.6.33/980-vm_exports.patch
new file mode 100644
index 0000000000..2c3a55201b
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/980-vm_exports.patch
@@ -0,0 +1,142 @@
+--- a/mm/shmem.c
++++ b/mm/shmem.c
+@@ -29,6 +29,7 @@
+ #include <linux/mm.h>
+ #include <linux/module.h>
+ #include <linux/swap.h>
++#include <linux/ima.h>
+ 
+ static struct vfsmount *shm_mnt;
+ 
+@@ -2620,6 +2621,16 @@ int shmem_lock(struct file *file, int lo
+ 
+ /* common code */
+ 
++void shmem_set_file(struct vm_area_struct *vma, struct file *file)
++{
++	ima_counts_get(file);
++	if (vma->vm_file)
++		fput(vma->vm_file);
++	vma->vm_file = file;
++	vma->vm_ops = &shmem_vm_ops;
++}
++EXPORT_SYMBOL_GPL(shmem_set_file);
++
+ /**
+  * shmem_file_setup - get an unlinked file living in tmpfs
+  * @name: name for dentry (to be seen in /proc/<pid>/maps
+@@ -2697,9 +2708,6 @@ int shmem_zero_setup(struct vm_area_stru
+ 	if (IS_ERR(file))
+ 		return PTR_ERR(file);
+ 
+-	if (vma->vm_file)
+-		fput(vma->vm_file);
+-	vma->vm_file = file;
+-	vma->vm_ops = &shmem_vm_ops;
++	shmem_set_file(vma, file);
+ 	return 0;
+ }
+--- a/fs/file.c
++++ b/fs/file.c
+@@ -271,6 +271,7 @@ int expand_files(struct files_struct *fi
+ 	/* All good, so we try */
+ 	return expand_fdtable(files, nr);
+ }
++EXPORT_SYMBOL_GPL(expand_files);
+ 
+ static int count_open_files(struct fdtable *fdt)
+ {
+--- a/kernel/exit.c
++++ b/kernel/exit.c
+@@ -508,6 +508,7 @@ struct files_struct *get_files_struct(st
+ 
+ 	return files;
+ }
++EXPORT_SYMBOL_GPL(get_files_struct);
+ 
+ void put_files_struct(struct files_struct *files)
+ {
+@@ -527,6 +528,7 @@ void put_files_struct(struct files_struc
+ 		free_fdtable(fdt);
+ 	}
+ }
++EXPORT_SYMBOL_GPL(put_files_struct);
+ 
+ void reset_files_struct(struct files_struct *files)
+ {
+--- a/kernel/fork.c
++++ b/kernel/fork.c
+@@ -169,6 +169,7 @@ void __put_task_struct(struct task_struc
+ 	if (!profile_handoff_task(tsk))
+ 		free_task(tsk);
+ }
++EXPORT_SYMBOL_GPL(__put_task_struct);
+ 
+ /*
+  * macro override instead of weak attribute alias, to workaround
+--- a/kernel/sched.c
++++ b/kernel/sched.c
+@@ -6171,6 +6171,7 @@ int can_nice(const struct task_struct *p
+ 	return (nice_rlim <= p->signal->rlim[RLIMIT_NICE].rlim_cur ||
+ 		capable(CAP_SYS_NICE));
+ }
++EXPORT_SYMBOL_GPL(can_nice);
+ 
+ #ifdef __ARCH_WANT_SYS_NICE
+ 
+--- a/mm/memory.c
++++ b/mm/memory.c
+@@ -1115,6 +1115,7 @@ unsigned long zap_page_range(struct vm_a
+ 		tlb_finish_mmu(tlb, address, end);
+ 	return end;
+ }
++EXPORT_SYMBOL_GPL(zap_page_range);
+ 
+ /**
+  * zap_vma_ptes - remove ptes mapping the vma
+@@ -2501,6 +2502,7 @@ int vmtruncate_range(struct inode *inode
+ 
+ 	return 0;
+ }
++EXPORT_SYMBOL_GPL(vmtruncate_range);
+ 
+ /*
+  * We enter with non-exclusive mmap_sem (to exclude vma changes,
+--- a/mm/vmalloc.c
++++ b/mm/vmalloc.c
+@@ -1173,6 +1173,7 @@ void unmap_kernel_range(unsigned long ad
+ 	vunmap_page_range(addr, end);
+ 	flush_tlb_kernel_range(addr, end);
+ }
++EXPORT_SYMBOL_GPL(unmap_kernel_range);
+ 
+ int map_vm_area(struct vm_struct *area, pgprot_t prot, struct page ***pages)
+ {
+@@ -1288,6 +1289,7 @@ struct vm_struct *get_vm_area(unsigned l
+ 	return __get_vm_area_node(size, 1, flags, VMALLOC_START, VMALLOC_END,
+ 				-1, GFP_KERNEL, __builtin_return_address(0));
+ }
++EXPORT_SYMBOL_GPL(get_vm_area);
+ 
+ struct vm_struct *get_vm_area_caller(unsigned long size, unsigned long flags,
+ 				void *caller)
+--- a/include/linux/mm.h
++++ b/include/linux/mm.h
+@@ -725,6 +725,7 @@ extern void show_free_areas(void);
+ 
+ int shmem_lock(struct file *file, int lock, struct user_struct *user);
+ struct file *shmem_file_setup(const char *name, loff_t size, unsigned long flags);
++void shmem_set_file(struct vm_area_struct *vma, struct file *file);
+ int shmem_zero_setup(struct vm_area_struct *);
+ 
+ #ifndef CONFIG_MMU
+--- a/kernel/signal.c
++++ b/kernel/signal.c
+@@ -1104,6 +1104,7 @@ struct sighand_struct *lock_task_sighand
+ 
+ 	return sighand;
+ }
++EXPORT_SYMBOL(lock_task_sighand);
+ 
+ /*
+  * send signal info to all the members of a group
diff --git a/target/linux/generic/patches-2.6.33/981-wireless_ext_kconfig_hack.patch b/target/linux/generic/patches-2.6.33/981-wireless_ext_kconfig_hack.patch
new file mode 100644
index 0000000000..daac5898ae
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/981-wireless_ext_kconfig_hack.patch
@@ -0,0 +1,22 @@
+--- a/net/wireless/Kconfig
++++ b/net/wireless/Kconfig
+@@ -1,5 +1,5 @@
+ config WIRELESS_EXT
+-	bool
++	bool "Wireless extensions"
+ 
+ config WEXT_CORE
+ 	def_bool y
+@@ -11,10 +11,10 @@ config WEXT_PROC
+ 	depends on WEXT_CORE
+ 
+ config WEXT_SPY
+-	bool
++	bool "WEXT_SPY"
+ 
+ config WEXT_PRIV
+-	bool
++	bool "WEXT_PRIV"
+ 
+ config CFG80211
+ 	tristate "cfg80211 - wireless configuration API"
diff --git a/target/linux/generic/patches-2.6.33/985-cris-headers.patch b/target/linux/generic/patches-2.6.33/985-cris-headers.patch
new file mode 100644
index 0000000000..73ede933ba
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/985-cris-headers.patch
@@ -0,0 +1,27 @@
+--- a/arch/cris/include/arch-v10/arch/Kbuild
++++ b/arch/cris/include/arch-v10/arch/Kbuild
+@@ -1,3 +1,5 @@
++header-y += elf.h
++header-y += ptrace.h
+ header-y += user.h
+ header-y += svinto.h
+ header-y += sv_addr_ag.h
+--- a/arch/cris/include/asm/Kbuild
++++ b/arch/cris/include/asm/Kbuild
+@@ -1,11 +1,14 @@
+ include include/asm-generic/Kbuild.asm
+ 
+-header-y += arch-v10/
+-header-y += arch-v32/
++header-y += ../arch-v10/arch/
++header-y += ../arch-v32/arch/
+ 
++header-y += elf.h
+ header-y += ethernet.h
++header-y += page.h
+ header-y += rtc.h
+ header-y += sync_serial.h
++header-y += user.h
+ 
+ unifdef-y += etraxgpio.h
+ unifdef-y += rs485.h
diff --git a/target/linux/generic/patches-2.6.33/991-ppc4xx_optimization.patch b/target/linux/generic/patches-2.6.33/991-ppc4xx_optimization.patch
new file mode 100644
index 0000000000..0efb777809
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/991-ppc4xx_optimization.patch
@@ -0,0 +1,31 @@
+Upstream doesn't optimize the kernel and bootwrappers for ppc44x because
+they still want to support gcc 3.3 -- well, we don't.
+
+--- a/arch/powerpc/Makefile
++++ b/arch/powerpc/Makefile
+@@ -123,7 +123,8 @@ ifeq ($(CONFIG_FUNCTION_TRACER),y)
+ KBUILD_CFLAGS		+= -mno-sched-epilog
+ endif
+ 
+-cpu-as-$(CONFIG_4xx)		+= -Wa,-m405
++cpu-as-$(CONFIG_40x)		+= -Wa,-m405
++cpu-as-$(CONFIG_44x)		+= -Wa,-m440
+ cpu-as-$(CONFIG_6xx)		+= -Wa,-maltivec
+ cpu-as-$(CONFIG_POWER4)		+= -Wa,-maltivec
+ cpu-as-$(CONFIG_E500)		+= -Wa,-me500
+--- a/arch/powerpc/boot/Makefile
++++ b/arch/powerpc/boot/Makefile
+@@ -38,10 +38,10 @@ BOOTCFLAGS	+= -I$(obj) -I$(srctree)/$(ob
+ DTS_FLAGS	?= -p 1024
+ 
+ $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
+-$(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
++$(obj)/ebony.o: BOOTCFLAGS += -mcpu=440
+ $(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405
+-$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
+-$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
++$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=440
++$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440
+ $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
+ $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
+ $(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
diff --git a/target/linux/generic/patches-2.6.33/997-lzo_decompressor_fix.patch b/target/linux/generic/patches-2.6.33/997-lzo_decompressor_fix.patch
new file mode 100644
index 0000000000..450986538d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/997-lzo_decompressor_fix.patch
@@ -0,0 +1,11 @@
+--- a/usr/Kconfig
++++ b/usr/Kconfig
+@@ -75,7 +75,7 @@ config RD_LZMA
+ config RD_LZO
+ 	bool "Support initial ramdisks compressed using LZO" if EMBEDDED
+ 	default !EMBEDDED
+-	depends on BLK_DEV_INITRD
++	depends on BLK_DEV_INITRD && HAVE_KERNEL_LZO
+ 	select DECOMPRESS_LZO
+ 	help
+ 	  Support loading of a LZO encoded initial ramdisk or cpio buffer
diff --git a/target/linux/generic/patches-2.6.33/998-openwrt_lzma_options.patch b/target/linux/generic/patches-2.6.33/998-openwrt_lzma_options.patch
new file mode 100644
index 0000000000..0ac880caea
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/998-openwrt_lzma_options.patch
@@ -0,0 +1,54 @@
+--- a/scripts/Makefile.lib
++++ b/scripts/Makefile.lib
+@@ -238,7 +238,7 @@ cmd_bzip2 = (cat $(filter-out FORCE,$^) 
+ 
+ quiet_cmd_lzma = LZMA    $@
+ cmd_lzma = (cat $(filter-out FORCE,$^) | \
+-	lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
++	lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ 	(rm -f $@ ; false)
+ 
+ quiet_cmd_lzo = LZO    $@
+--- a/scripts/gen_initramfs_list.sh
++++ b/scripts/gen_initramfs_list.sh
+@@ -225,7 +225,7 @@ cpio_list=
+ output="/dev/stdout"
+ output_file=""
+ is_cpio_compressed=
+-compr="gzip -9 -f"
++compr="gzip -9 -f -"
+ 
+ arg="$1"
+ case "$arg" in
+@@ -239,9 +239,9 @@ case "$arg" in
+ 		output_file="$1"
+ 		cpio_list="$(mktemp ${TMPDIR:-/tmp}/cpiolist.XXXXXX)"
+ 		output=${cpio_list}
+-		echo "$output_file" | grep -q "\.gz$" && compr="gzip -9 -f"
+-		echo "$output_file" | grep -q "\.bz2$" && compr="bzip2 -9 -f"
+-		echo "$output_file" | grep -q "\.lzma$" && compr="lzma -9 -f"
++		echo "$output_file" | grep -q "\.gz$" && compr="gzip -9 -f -"
++		echo "$output_file" | grep -q "\.bz2$" && compr="bzip2 -9 -f -"
++		echo "$output_file" | grep -q "\.lzma$" && compr="lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so"
+ 		echo "$output_file" | grep -q "\.cpio$" && compr="cat"
+ 		shift
+ 		;;
+@@ -292,7 +292,7 @@ if [ ! -z ${output_file} ]; then
+ 	if [ "${is_cpio_compressed}" = "compressed" ]; then
+ 		cat ${cpio_tfile} > ${output_file}
+ 	else
+-		(cat ${cpio_tfile} | ${compr}  - > ${output_file}) \
++		(cat ${cpio_tfile} | ${compr} > ${output_file}) \
+ 		|| (rm -f ${output_file} ; false)
+ 	fi
+ 	[ -z ${cpio_file} ] && rm ${cpio_tfile}
+--- a/lib/decompress.c
++++ b/lib/decompress.c
+@@ -36,6 +36,7 @@ static const struct compress_format {
+ 	{ {037, 0236}, "gzip", gunzip },
+ 	{ {0x42, 0x5a}, "bzip2", bunzip2 },
+ 	{ {0x5d, 0x00}, "lzma", unlzma },
++	{ {0x6d, 0x00}, "lzma-openwrt", unlzma },
+ 	{ {0x89, 0x4c}, "lzo", unlzo },
+ 	{ {0, 0}, NULL, NULL }
+ };
diff --git a/target/linux/generic/patches-2.6.33/999-use_preinit_as_init.patch b/target/linux/generic/patches-2.6.33/999-use_preinit_as_init.patch
new file mode 100644
index 0000000000..c1f8ef075e
--- /dev/null
+++ b/target/linux/generic/patches-2.6.33/999-use_preinit_as_init.patch
@@ -0,0 +1,14 @@
+--- a/init/main.c
++++ b/init/main.c
+@@ -831,10 +831,7 @@ static noinline int init_post(void)
+ 		printk(KERN_WARNING "Failed to execute %s.  Attempting "
+ 					"defaults...\n", execute_command);
+ 	}
+-	run_init_process("/sbin/init");
+-	run_init_process("/etc/init");
+-	run_init_process("/bin/init");
+-	run_init_process("/bin/sh");
++	run_init_process("/etc/preinit");
+ 
+ 	panic("No init found.  Try passing init= option to kernel.");
+ }
diff --git a/target/linux/generic/patches-2.6.34/006-squashfs_add_lzma.patch b/target/linux/generic/patches-2.6.34/006-squashfs_add_lzma.patch
new file mode 100644
index 0000000000..29d507eb4a
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/006-squashfs_add_lzma.patch
@@ -0,0 +1,217 @@
+From f49e1efdd179d54e814ff2a8e8f469496583062c Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Tue, 20 Oct 2009 10:54:36 +0100
+Subject: [PATCH] Squashfs: add LZMA compression
+
+Add support for LZMA compressed filesystems.  This is an initial
+implementation.
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/Kconfig        |    5 ++
+ fs/squashfs/Makefile       |    1 +
+ fs/squashfs/decompressor.c |    4 +
+ fs/squashfs/lzma_wrapper.c |  151 ++++++++++++++++++++++++++++++++++++++++++++
+ fs/squashfs/squashfs.h     |    3 +
+ 5 files changed, 164 insertions(+), 0 deletions(-)
+ create mode 100644 fs/squashfs/lzma_wrapper.c
+
+--- a/fs/squashfs/Kconfig
++++ b/fs/squashfs/Kconfig
+@@ -26,6 +26,11 @@ config SQUASHFS
+ 
+ 	  If unsure, say N.
+ 
++config SQUASHFS_LZMA
++	bool "Include support for LZMA compressed file systems"
++	depends on SQUASHFS
++	select DECOMPRESS_LZMA
++
+ config SQUASHFS_EMBEDDED
+ 
+ 	bool "Additional option for memory-constrained systems" 
+--- a/fs/squashfs/Makefile
++++ b/fs/squashfs/Makefile
+@@ -5,3 +5,4 @@
+ obj-$(CONFIG_SQUASHFS) += squashfs.o
+ squashfs-y += block.o cache.o dir.o export.o file.o fragment.o id.o inode.o
+ squashfs-y += namei.o super.o symlink.o zlib_wrapper.o decompressor.o
++squashfs-$(CONFIG_SQUASHFS_LZMA) += lzma_wrapper.o
+--- a/fs/squashfs/decompressor.c
++++ b/fs/squashfs/decompressor.c
+@@ -50,7 +50,11 @@ static const struct squashfs_decompresso
+ 
+ static const struct squashfs_decompressor *decompressor[] = {
+ 	&squashfs_zlib_comp_ops,
++#ifdef CONFIG_SQUASHFS_LZMA
++	&squashfs_lzma_comp_ops,
++#else
+ 	&squashfs_lzma_unsupported_comp_ops,
++#endif
+ 	&squashfs_lzo_unsupported_comp_ops,
+ 	&squashfs_unknown_comp_ops
+ };
+--- /dev/null
++++ b/fs/squashfs/lzma_wrapper.c
+@@ -0,0 +1,152 @@
++/*
++ * Squashfs - a compressed read only filesystem for Linux
++ *
++ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
++ * Phillip Lougher <phillip@lougher.demon.co.uk>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2,
++ * or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++ *
++ * lzma_wrapper.c
++ */
++
++#include <asm/unaligned.h>
++#include <linux/buffer_head.h>
++#include <linux/mutex.h>
++#include <linux/vmalloc.h>
++#include <linux/decompress/unlzma.h>
++#include <linux/slab.h>
++
++#include "squashfs_fs.h"
++#include "squashfs_fs_sb.h"
++#include "squashfs_fs_i.h"
++#include "squashfs.h"
++#include "decompressor.h"
++
++struct squashfs_lzma {
++	void	*input;
++	void	*output;
++};
++
++/* decompress_unlzma.c is currently non re-entrant... */
++DEFINE_MUTEX(lzma_mutex);
++
++/* decompress_unlzma.c doesn't provide any context in its callbacks... */
++static int lzma_error;
++
++static void error(char *m)
++{
++	ERROR("unlzma error: %s\n", m);
++	lzma_error = 1;
++}
++
++	
++static void *lzma_init(struct squashfs_sb_info *msblk)
++{
++	struct squashfs_lzma *stream = kzalloc(sizeof(*stream), GFP_KERNEL);
++	if (stream == NULL)
++		goto failed;
++	stream->input = vmalloc(msblk->block_size);
++	if (stream->input == NULL)
++		goto failed;
++	stream->output = vmalloc(msblk->block_size);
++	if (stream->output == NULL)
++		goto failed2;
++
++	return stream;
++
++failed2:
++	vfree(stream->input);
++failed:
++	ERROR("failed to allocate lzma workspace\n");
++	kfree(stream);
++	return NULL;
++}
++
++
++static void lzma_free(void *strm)
++{
++	struct squashfs_lzma *stream = strm;
++
++	if (stream) {
++		vfree(stream->input);
++		vfree(stream->output);
++	}
++	kfree(stream);
++}
++
++
++static int lzma_uncompress(struct squashfs_sb_info *msblk, void **buffer,
++	struct buffer_head **bh, int b, int offset, int length, int srclength,
++	int pages)
++{
++	struct squashfs_lzma *stream = msblk->stream;
++	void *buff = stream->input;
++	int avail, i, bytes = length, res;
++
++	mutex_lock(&lzma_mutex);
++
++	for (i = 0; i < b; i++) {
++		wait_on_buffer(bh[i]);
++		if (!buffer_uptodate(bh[i]))
++			goto block_release;
++
++		avail = min(bytes, msblk->devblksize - offset);
++		memcpy(buff, bh[i]->b_data + offset, avail);
++		buff += avail;
++		bytes -= avail;
++		offset = 0;
++		put_bh(bh[i]);
++	}
++
++	lzma_error = 0;
++	res = unlzma(stream->input, length, NULL, NULL, stream->output, NULL,
++							error);
++	if (res || lzma_error)
++		goto failed;
++
++	/* uncompressed size is stored in the LZMA header (5 byte offset) */
++	res = bytes = get_unaligned_le32(stream->input + 5);
++	for (i = 0, buff = stream->output; bytes && i < pages; i++) {
++		avail = min_t(int, bytes, PAGE_CACHE_SIZE);
++		memcpy(buffer[i], buff, avail);
++		buff += avail;
++		bytes -= avail;
++	}
++	if (bytes)
++		goto failed;
++
++	mutex_unlock(&lzma_mutex);
++	return res;
++
++block_release:
++	for (; i < b; i++)
++		put_bh(bh[i]);
++
++failed:
++	mutex_unlock(&lzma_mutex);
++
++	ERROR("lzma decompression failed, data probably corrupt\n");
++	return -EIO;
++}
++
++const struct squashfs_decompressor squashfs_lzma_comp_ops = {
++	.init = lzma_init,
++	.free = lzma_free,
++	.decompress = lzma_uncompress,
++	.id = LZMA_COMPRESSION,
++	.name = "lzma",
++	.supported = 1
++};
++
+--- a/fs/squashfs/squashfs.h
++++ b/fs/squashfs/squashfs.h
+@@ -94,3 +94,6 @@ extern const struct address_space_operat
+ 
+ /* zlib_wrapper.c */
+ extern const struct squashfs_decompressor squashfs_zlib_comp_ops;
++
++/* lzma wrapper.c */
++extern const struct squashfs_decompressor squashfs_lzma_comp_ops;
diff --git a/target/linux/generic/patches-2.6.34/007-squashfs_make_lzma_available.patch b/target/linux/generic/patches-2.6.34/007-squashfs_make_lzma_available.patch
new file mode 100644
index 0000000000..c1a105d0dc
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/007-squashfs_make_lzma_available.patch
@@ -0,0 +1,165 @@
+From fdf23ed283bc6ef5c25076ce2065f892120ff556 Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Thu, 22 Oct 2009 04:57:38 +0100
+Subject: [PATCH] Squashfs: Make unlzma available to non initramfs/initrd code
+
+Add a config option DECOMPRESS_LZMA_NEEDED which allows subsystems to
+specify they need the unlzma code.  Normally decompress_unlzma.c is
+compiled with __init and unlzma is not exported to modules.
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/Kconfig                   |    1 +
+ include/linux/decompress/bunzip2_mm.h |   12 ++++++++++++
+ include/linux/decompress/inflate_mm.h |   12 ++++++++++++
+ include/linux/decompress/mm.h         |    3 ---
+ include/linux/decompress/unlzma_mm.h  |   20 ++++++++++++++++++++
+ lib/Kconfig                           |    3 +++
+ lib/decompress_bunzip2.c              |    1 +
+ lib/decompress_inflate.c              |    1 +
+ lib/decompress_unlzma.c               |    5 ++++-
+ 9 files changed, 54 insertions(+), 4 deletions(-)
+ create mode 100644 include/linux/decompress/bunzip2_mm.h
+ create mode 100644 include/linux/decompress/inflate_mm.h
+ create mode 100644 include/linux/decompress/unlzma_mm.h
+
+--- a/fs/squashfs/Kconfig
++++ b/fs/squashfs/Kconfig
+@@ -30,6 +30,7 @@ config SQUASHFS_LZMA
+ 	bool "Include support for LZMA compressed file systems"
+ 	depends on SQUASHFS
+ 	select DECOMPRESS_LZMA
++	select DECOMPRESS_LZMA_NEEDED
+ 
+ config SQUASHFS_EMBEDDED
+ 
+--- /dev/null
++++ b/include/linux/decompress/bunzip2_mm.h
+@@ -0,0 +1,12 @@
++#ifndef BUNZIP2_MM_H
++#define BUNZIP2_MM_H
++
++#ifdef STATIC
++/* Code active when included from pre-boot environment: */
++#define INIT
++#else
++/* Compile for initramfs/initrd code only */
++#define INIT __init
++#endif
++
++#endif
+--- /dev/null
++++ b/include/linux/decompress/inflate_mm.h
+@@ -0,0 +1,12 @@
++#ifndef INFLATE_MM_H
++#define INFLATE_MM_H
++
++#ifdef STATIC
++/* Code active when included from pre-boot environment: */
++#define INIT
++#else
++/* Compile for initramfs/initrd code only */
++#define INIT __init
++#endif
++
++#endif
+--- a/include/linux/decompress/mm.h
++++ b/include/linux/decompress/mm.h
+@@ -63,8 +63,6 @@ static void free(void *where)
+ 
+ #define set_error_fn(x)
+ 
+-#define INIT
+-
+ #else /* STATIC */
+ 
+ /* Code active when compiled standalone for use when loading ramdisk: */
+@@ -87,7 +85,6 @@ static void free(void *where)
+ static void(*error)(char *m);
+ #define set_error_fn(x) error = x;
+ 
+-#define INIT __init
+ #define STATIC
+ 
+ #include <linux/init.h>
+--- /dev/null
++++ b/include/linux/decompress/unlzma_mm.h
+@@ -0,0 +1,20 @@
++#ifndef UNLZMA_MM_H
++#define UNLZMA_MM_H
++
++#ifdef STATIC
++
++/* Code active when included from pre-boot environment: */
++#define INIT
++
++#elif defined(CONFIG_DECOMPRESS_LZMA_NEEDED)
++
++/* Make it available to non initramfs/initrd code */
++#define INIT
++#include <linux/module.h>
++#else
++
++/* Compile for initramfs/initrd code only */
++#define INIT __init
++#endif
++
++#endif
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -121,6 +121,9 @@ config DECOMPRESS_LZO
+ 	select LZO_DECOMPRESS
+ 	tristate
+ 
++config DECOMPRESS_LZMA_NEEDED
++	 boolean
++
+ #
+ # Generic allocator support is selected if needed
+ #
+--- a/lib/decompress_bunzip2.c
++++ b/lib/decompress_bunzip2.c
+@@ -52,6 +52,7 @@
+ #include <linux/slab.h>
+ #endif /* STATIC */
+ 
++#include <linux/decompress/bunzip2_mm.h>
+ #include <linux/decompress/mm.h>
+ 
+ #ifndef INT_MAX
+--- a/lib/decompress_inflate.c
++++ b/lib/decompress_inflate.c
+@@ -23,6 +23,7 @@
+ 
+ #endif /* STATIC */
+ 
++#include <linux/decompress/inflate_mm.h>
+ #include <linux/decompress/mm.h>
+ 
+ #define GZIP_IOBUF_SIZE (16*1024)
+--- a/lib/decompress_unlzma.c
++++ b/lib/decompress_unlzma.c
+@@ -36,6 +36,7 @@
+ #include <linux/slab.h>
+ #endif /* STATIC */
+ 
++#include <linux/decompress/unlzma_mm.h>
+ #include <linux/decompress/mm.h>
+ 
+ #define	MIN(a, b) (((a) < (b)) ? (a) : (b))
+@@ -531,7 +532,7 @@ static inline void INIT process_bit1(str
+ 
+ 
+ 
+-STATIC inline int INIT unlzma(unsigned char *buf, int in_len,
++STATIC int INIT unlzma(unsigned char *buf, int in_len,
+ 			      int(*fill)(void*, unsigned int),
+ 			      int(*flush)(void*, unsigned int),
+ 			      unsigned char *output,
+@@ -664,4 +665,6 @@ STATIC int INIT decompress(unsigned char
+ {
+ 	return unlzma(buf, in_len - 4, fill, flush, output, posp, error_fn);
+ }
++#elif defined(CONFIG_DECOMPRESS_LZMA_NEEDED)
++EXPORT_SYMBOL(unlzma);
+ #endif
diff --git a/target/linux/generic/patches-2.6.34/008-jffs2_make_lzma_available.patch b/target/linux/generic/patches-2.6.34/008-jffs2_make_lzma_available.patch
new file mode 100644
index 0000000000..5ab2e72928
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/008-jffs2_make_lzma_available.patch
@@ -0,0 +1,5142 @@
+--- a/fs/jffs2/Kconfig
++++ b/fs/jffs2/Kconfig
+@@ -139,6 +139,15 @@ config JFFS2_LZO
+ 	  This feature was added in July, 2007. Say 'N' if you need
+ 	  compatibility with older bootloaders or kernels.
+ 
++config JFFS2_LZMA
++	bool "JFFS2 LZMA compression support" if JFFS2_COMPRESSION_OPTIONS
++	select LZMA_COMPRESS
++	select LZMA_DECOMPRESS
++	depends on JFFS2_FS
++	default n
++	help
++	  JFFS2 wrapper to the LZMA C SDK
++
+ config JFFS2_RTIME
+ 	bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
+ 	depends on JFFS2_FS
+--- a/fs/jffs2/Makefile
++++ b/fs/jffs2/Makefile
+@@ -18,4 +18,7 @@ jffs2-$(CONFIG_JFFS2_RUBIN)	+= compr_rub
+ jffs2-$(CONFIG_JFFS2_RTIME)	+= compr_rtime.o
+ jffs2-$(CONFIG_JFFS2_ZLIB)	+= compr_zlib.o
+ jffs2-$(CONFIG_JFFS2_LZO)	+= compr_lzo.o
++jffs2-$(CONFIG_JFFS2_LZMA)      += compr_lzma.o
+ jffs2-$(CONFIG_JFFS2_SUMMARY)   += summary.o
++
++CFLAGS_compr_lzma.o += -Iinclude/linux -Ilib/lzma
+--- a/fs/jffs2/compr.c
++++ b/fs/jffs2/compr.c
+@@ -319,6 +319,9 @@ int __init jffs2_compressors_init(void)
+ #ifdef CONFIG_JFFS2_LZO
+ 	jffs2_lzo_init();
+ #endif
++#ifdef CONFIG_JFFS2_LZMA
++        jffs2_lzma_init();
++#endif
+ /* Setting default compression mode */
+ #ifdef CONFIG_JFFS2_CMODE_NONE
+ 	jffs2_compression_mode = JFFS2_COMPR_MODE_NONE;
+@@ -342,6 +345,9 @@ int __init jffs2_compressors_init(void)
+ int jffs2_compressors_exit(void)
+ {
+ /* Unregistering compressors */
++#ifdef CONFIG_JFFS2_LZMA
++        jffs2_lzma_exit();
++#endif
+ #ifdef CONFIG_JFFS2_LZO
+ 	jffs2_lzo_exit();
+ #endif
+--- a/fs/jffs2/compr.h
++++ b/fs/jffs2/compr.h
+@@ -28,9 +28,9 @@
+ #define JFFS2_DYNRUBIN_PRIORITY  20
+ #define JFFS2_LZARI_PRIORITY     30
+ #define JFFS2_RTIME_PRIORITY     50
+-#define JFFS2_ZLIB_PRIORITY      60
+-#define JFFS2_LZO_PRIORITY       80
+-
++#define JFFS2_LZMA_PRIORITY      70
++#define JFFS2_ZLIB_PRIORITY      80
++#define JFFS2_LZO_PRIORITY       90
+ 
+ #define JFFS2_RUBINMIPS_DISABLED /* RUBINs will be used only */
+ #define JFFS2_DYNRUBIN_DISABLED  /*	   for decompression */
+@@ -98,5 +98,9 @@ void jffs2_zlib_exit(void);
+ int jffs2_lzo_init(void);
+ void jffs2_lzo_exit(void);
+ #endif
++#ifdef CONFIG_JFFS2_LZMA
++int jffs2_lzma_init(void);
++void jffs2_lzma_exit(void);
++#endif
+ 
+ #endif /* __JFFS2_COMPR_H__ */
+--- /dev/null
++++ b/fs/jffs2/compr_lzma.c
+@@ -0,0 +1,128 @@
++/*
++ * JFFS2 -- Journalling Flash File System, Version 2.
++ *
++ * For licensing information, see the file 'LICENCE' in this directory.
++ *
++ * JFFS2 wrapper to the LZMA C SDK
++ *
++ */
++
++#include <linux/lzma.h>
++#include "compr.h"
++
++#ifdef __KERNEL__
++	static DEFINE_MUTEX(deflate_mutex);
++#endif
++
++CLzmaEncHandle *p;
++Byte propsEncoded[LZMA_PROPS_SIZE];
++SizeT propsSize = sizeof(propsEncoded);
++
++STATIC void lzma_free_workspace(void)
++{
++	LzmaEnc_Destroy(p, &lzma_alloc, &lzma_alloc);
++}
++
++STATIC int INIT lzma_alloc_workspace(CLzmaEncProps *props)
++{
++	if ((p = (CLzmaEncHandle *)LzmaEnc_Create(&lzma_alloc)) == NULL)
++	{
++		PRINT_ERROR("Failed to allocate lzma deflate workspace\n");
++		return -ENOMEM;
++	}
++
++	if (LzmaEnc_SetProps(p, props) != SZ_OK)
++	{
++		lzma_free_workspace();
++		return -1;
++	}
++	
++	if (LzmaEnc_WriteProperties(p, propsEncoded, &propsSize) != SZ_OK)
++	{
++		lzma_free_workspace();
++		return -1;
++	}
++
++        return 0;
++}
++
++STATIC int jffs2_lzma_compress(unsigned char *data_in, unsigned char *cpage_out,
++			      uint32_t *sourcelen, uint32_t *dstlen, void *model)
++{
++	SizeT compress_size = (SizeT)(*dstlen);
++	int ret;
++
++	#ifdef __KERNEL__
++		mutex_lock(&deflate_mutex);
++	#endif
++
++	ret = LzmaEnc_MemEncode(p, cpage_out, &compress_size, data_in, *sourcelen,
++		0, NULL, &lzma_alloc, &lzma_alloc);
++
++	#ifdef __KERNEL__
++		mutex_unlock(&deflate_mutex);
++	#endif
++
++	if (ret != SZ_OK)
++		return -1;
++
++	*dstlen = (uint32_t)compress_size;
++
++	return 0;
++}
++
++STATIC int jffs2_lzma_decompress(unsigned char *data_in, unsigned char *cpage_out,
++				 uint32_t srclen, uint32_t destlen, void *model)
++{
++	int ret;
++	SizeT dl = (SizeT)destlen;
++	SizeT sl = (SizeT)srclen;
++	ELzmaStatus status;
++	
++	ret = LzmaDecode(cpage_out, &dl, data_in, &sl, propsEncoded,
++		propsSize, LZMA_FINISH_ANY, &status, &lzma_alloc);
++
++	if (ret != SZ_OK || status == LZMA_STATUS_NOT_FINISHED || dl != (SizeT)destlen)
++		return -1;
++
++	return 0;
++}
++
++static struct jffs2_compressor jffs2_lzma_comp = {
++	.priority = JFFS2_LZMA_PRIORITY,
++	.name = "lzma",
++	.compr = JFFS2_COMPR_LZMA,
++	.compress = &jffs2_lzma_compress,
++	.decompress = &jffs2_lzma_decompress,
++	.disabled = 0,
++};
++
++int INIT jffs2_lzma_init(void)
++{
++        int ret;
++	CLzmaEncProps props;
++	LzmaEncProps_Init(&props);
++
++        props.dictSize = LZMA_BEST_DICT(0x2000);
++        props.level = LZMA_BEST_LEVEL;
++        props.lc = LZMA_BEST_LC;
++        props.lp = LZMA_BEST_LP;
++        props.pb = LZMA_BEST_PB;
++        props.fb = LZMA_BEST_FB;
++
++	ret = lzma_alloc_workspace(&props);
++        if (ret < 0)
++                return ret;
++
++	ret = jffs2_register_compressor(&jffs2_lzma_comp);
++	if (ret)
++		lzma_free_workspace();
++	
++        return ret;
++}
++
++void jffs2_lzma_exit(void)
++{
++	jffs2_unregister_compressor(&jffs2_lzma_comp);
++	lzma_free_workspace();
++}
+--- a/fs/jffs2/super.c
++++ b/fs/jffs2/super.c
+@@ -254,14 +254,41 @@ static int __init init_jffs2_fs(void)
+ 	BUILD_BUG_ON(sizeof(struct jffs2_raw_inode) != 68);
+ 	BUILD_BUG_ON(sizeof(struct jffs2_raw_summary) != 32);
+ 
+-	printk(KERN_INFO "JFFS2 version 2.2."
++	printk(KERN_INFO "JFFS2 version 2.2"
+ #ifdef CONFIG_JFFS2_FS_WRITEBUFFER
+ 	       " (NAND)"
+ #endif
+ #ifdef CONFIG_JFFS2_SUMMARY
+-	       " (SUMMARY) "
++	       " (SUMMARY)"
+ #endif
+-	       " © 2001-2006 Red Hat, Inc.\n");
++#ifdef CONFIG_JFFS2_ZLIB
++	       " (ZLIB)"
++#endif
++#ifdef CONFIG_JFFS2_LZO
++	       " (LZO)"
++#endif
++#ifdef CONFIG_JFFS2_LZMA
++	       " (LZMA)"
++#endif
++#ifdef CONFIG_JFFS2_RTIME
++	       " (RTIME)"
++#endif
++#ifdef CONFIG_JFFS2_RUBIN
++	       " (RUBIN)"
++#endif
++#ifdef  CONFIG_JFFS2_CMODE_NONE
++	       " (CMODE_NONE)"
++#endif
++#ifdef CONFIG_JFFS2_CMODE_PRIORITY
++	       " (CMODE_PRIORITY)"
++#endif
++#ifdef CONFIG_JFFS2_CMODE_SIZE
++	       " (CMODE_SIZE)"
++#endif
++#ifdef CONFIG_JFFS2_CMODE_FAVOURLZO
++	       " (CMODE_FAVOURLZO)"
++#endif
++	       " (c) 2001-2006 Red Hat, Inc.\n");
+ 
+ 	jffs2_inode_cachep = kmem_cache_create("jffs2_i",
+ 					     sizeof(struct jffs2_inode_info),
+--- a/include/linux/jffs2.h
++++ b/include/linux/jffs2.h
+@@ -45,6 +45,7 @@
+ #define JFFS2_COMPR_DYNRUBIN	0x05
+ #define JFFS2_COMPR_ZLIB	0x06
+ #define JFFS2_COMPR_LZO		0x07
++#define JFFS2_COMPR_LZMA	0x08
+ /* Compatibility flags. */
+ #define JFFS2_COMPAT_MASK 0xc000      /* What do to if an unknown nodetype is found */
+ #define JFFS2_NODE_ACCURATE 0x2000
+--- /dev/null
++++ b/include/linux/lzma.h
+@@ -0,0 +1,62 @@
++#ifndef __LZMA_H__
++#define __LZMA_H__
++
++#ifdef __KERNEL__
++	#include <linux/kernel.h>
++	#include <linux/sched.h>
++	#include <linux/slab.h>
++	#include <linux/vmalloc.h>
++	#include <linux/init.h>
++	#define LZMA_MALLOC vmalloc
++	#define LZMA_FREE vfree
++	#define PRINT_ERROR(msg) printk(KERN_WARNING #msg)
++	#define INIT __init
++	#define STATIC static
++#else
++	#include <stdint.h>
++	#include <stdlib.h>
++	#include <stdio.h>
++	#include <unistd.h>
++	#include <string.h>
++	#include <asm/types.h>
++	#include <errno.h>
++	#include <linux/jffs2.h>
++	#ifndef PAGE_SIZE
++		extern int page_size;
++		#define PAGE_SIZE page_size
++	#endif
++	#define LZMA_MALLOC malloc
++	#define LZMA_FREE free
++	#define PRINT_ERROR(msg) fprintf(stderr, msg)
++	#define INIT
++	#define STATIC
++#endif
++
++#include "lzma/LzmaDec.h"
++#include "lzma/LzmaEnc.h"
++
++#define LZMA_BEST_LEVEL (9)
++#define LZMA_BEST_LC    (0)
++#define LZMA_BEST_LP    (0)
++#define LZMA_BEST_PB    (0)
++#define LZMA_BEST_FB  (273)
++
++#define LZMA_BEST_DICT(n) (((int)((n) / 2)) * 2)
++
++static void *p_lzma_malloc(void *p, size_t size)
++{
++        if (size == 0)
++                return NULL;
++
++        return LZMA_MALLOC(size);
++}
++
++static void p_lzma_free(void *p, void *address)
++{
++        if (address != NULL)
++                LZMA_FREE(address);
++}
++
++static ISzAlloc lzma_alloc = {p_lzma_malloc, p_lzma_free};
++
++#endif
+--- /dev/null
++++ b/include/linux/lzma/LzFind.h
+@@ -0,0 +1,115 @@
++/* LzFind.h -- Match finder for LZ algorithms
++2009-04-22 : Igor Pavlov : Public domain */
++
++#ifndef __LZ_FIND_H
++#define __LZ_FIND_H
++
++#include "Types.h"
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++typedef UInt32 CLzRef;
++
++typedef struct _CMatchFinder
++{
++  Byte *buffer;
++  UInt32 pos;
++  UInt32 posLimit;
++  UInt32 streamPos;
++  UInt32 lenLimit;
++
++  UInt32 cyclicBufferPos;
++  UInt32 cyclicBufferSize; /* it must be = (historySize + 1) */
++
++  UInt32 matchMaxLen;
++  CLzRef *hash;
++  CLzRef *son;
++  UInt32 hashMask;
++  UInt32 cutValue;
++
++  Byte *bufferBase;
++  ISeqInStream *stream;
++  int streamEndWasReached;
++
++  UInt32 blockSize;
++  UInt32 keepSizeBefore;
++  UInt32 keepSizeAfter;
++
++  UInt32 numHashBytes;
++  int directInput;
++  size_t directInputRem;
++  int btMode;
++  int bigHash;
++  UInt32 historySize;
++  UInt32 fixedHashSize;
++  UInt32 hashSizeSum;
++  UInt32 numSons;
++  SRes result;
++  UInt32 crc[256];
++} CMatchFinder;
++
++#define Inline_MatchFinder_GetPointerToCurrentPos(p) ((p)->buffer)
++#define Inline_MatchFinder_GetIndexByte(p, index) ((p)->buffer[(Int32)(index)])
++
++#define Inline_MatchFinder_GetNumAvailableBytes(p) ((p)->streamPos - (p)->pos)
++
++int MatchFinder_NeedMove(CMatchFinder *p);
++Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p);
++void MatchFinder_MoveBlock(CMatchFinder *p);
++void MatchFinder_ReadIfRequired(CMatchFinder *p);
++
++void MatchFinder_Construct(CMatchFinder *p);
++
++/* Conditions:
++     historySize <= 3 GB
++     keepAddBufferBefore + matchMaxLen + keepAddBufferAfter < 511MB
++*/
++int MatchFinder_Create(CMatchFinder *p, UInt32 historySize,
++    UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
++    ISzAlloc *alloc);
++void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc);
++void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems);
++void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue);
++
++UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *buffer, CLzRef *son,
++    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 _cutValue,
++    UInt32 *distances, UInt32 maxLen);
++
++/*
++Conditions:
++  Mf_GetNumAvailableBytes_Func must be called before each Mf_GetMatchLen_Func.
++  Mf_GetPointerToCurrentPos_Func's result must be used only before any other function
++*/
++
++typedef void (*Mf_Init_Func)(void *object);
++typedef Byte (*Mf_GetIndexByte_Func)(void *object, Int32 index);
++typedef UInt32 (*Mf_GetNumAvailableBytes_Func)(void *object);
++typedef const Byte * (*Mf_GetPointerToCurrentPos_Func)(void *object);
++typedef UInt32 (*Mf_GetMatches_Func)(void *object, UInt32 *distances);
++typedef void (*Mf_Skip_Func)(void *object, UInt32);
++
++typedef struct _IMatchFinder
++{
++  Mf_Init_Func Init;
++  Mf_GetIndexByte_Func GetIndexByte;
++  Mf_GetNumAvailableBytes_Func GetNumAvailableBytes;
++  Mf_GetPointerToCurrentPos_Func GetPointerToCurrentPos;
++  Mf_GetMatches_Func GetMatches;
++  Mf_Skip_Func Skip;
++} IMatchFinder;
++
++void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable);
++
++void MatchFinder_Init(CMatchFinder *p);
++UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
++UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
++void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
++void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif
+--- /dev/null
++++ b/include/linux/lzma/LzHash.h
+@@ -0,0 +1,54 @@
++/* LzHash.h -- HASH functions for LZ algorithms
++2009-02-07 : Igor Pavlov : Public domain */
++
++#ifndef __LZ_HASH_H
++#define __LZ_HASH_H
++
++#define kHash2Size (1 << 10)
++#define kHash3Size (1 << 16)
++#define kHash4Size (1 << 20)
++
++#define kFix3HashSize (kHash2Size)
++#define kFix4HashSize (kHash2Size + kHash3Size)
++#define kFix5HashSize (kHash2Size + kHash3Size + kHash4Size)
++
++#define HASH2_CALC hashValue = cur[0] | ((UInt32)cur[1] << 8);
++
++#define HASH3_CALC { \
++  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
++  hash2Value = temp & (kHash2Size - 1); \
++  hashValue = (temp ^ ((UInt32)cur[2] << 8)) & p->hashMask; }
++
++#define HASH4_CALC { \
++  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
++  hash2Value = temp & (kHash2Size - 1); \
++  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
++  hashValue = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & p->hashMask; }
++
++#define HASH5_CALC { \
++  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
++  hash2Value = temp & (kHash2Size - 1); \
++  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
++  hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)); \
++  hashValue = (hash4Value ^ (p->crc[cur[4]] << 3)) & p->hashMask; \
++  hash4Value &= (kHash4Size - 1); }
++
++/* #define HASH_ZIP_CALC hashValue = ((cur[0] | ((UInt32)cur[1] << 8)) ^ p->crc[cur[2]]) & 0xFFFF; */
++#define HASH_ZIP_CALC hashValue = ((cur[2] | ((UInt32)cur[0] << 8)) ^ p->crc[cur[1]]) & 0xFFFF;
++
++
++#define MT_HASH2_CALC \
++  hash2Value = (p->crc[cur[0]] ^ cur[1]) & (kHash2Size - 1);
++
++#define MT_HASH3_CALC { \
++  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
++  hash2Value = temp & (kHash2Size - 1); \
++  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); }
++
++#define MT_HASH4_CALC { \
++  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
++  hash2Value = temp & (kHash2Size - 1); \
++  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
++  hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & (kHash4Size - 1); }
++
++#endif
+--- /dev/null
++++ b/include/linux/lzma/LzmaDec.h
+@@ -0,0 +1,231 @@
++/* LzmaDec.h -- LZMA Decoder
++2009-02-07 : Igor Pavlov : Public domain */
++
++#ifndef __LZMA_DEC_H
++#define __LZMA_DEC_H
++
++#include "Types.h"
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/* #define _LZMA_PROB32 */
++/* _LZMA_PROB32 can increase the speed on some CPUs,
++   but memory usage for CLzmaDec::probs will be doubled in that case */
++
++#ifdef _LZMA_PROB32
++#define CLzmaProb UInt32
++#else
++#define CLzmaProb UInt16
++#endif
++
++
++/* ---------- LZMA Properties ---------- */
++
++#define LZMA_PROPS_SIZE 5
++
++typedef struct _CLzmaProps
++{
++  unsigned lc, lp, pb;
++  UInt32 dicSize;
++} CLzmaProps;
++
++/* LzmaProps_Decode - decodes properties
++Returns:
++  SZ_OK
++  SZ_ERROR_UNSUPPORTED - Unsupported properties
++*/
++
++SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size);
++
++
++/* ---------- LZMA Decoder state ---------- */
++
++/* LZMA_REQUIRED_INPUT_MAX = number of required input bytes for worst case.
++   Num bits = log2((2^11 / 31) ^ 22) + 26 < 134 + 26 = 160; */
++
++#define LZMA_REQUIRED_INPUT_MAX 20
++
++typedef struct
++{
++  CLzmaProps prop;
++  CLzmaProb *probs;
++  Byte *dic;
++  const Byte *buf;
++  UInt32 range, code;
++  SizeT dicPos;
++  SizeT dicBufSize;
++  UInt32 processedPos;
++  UInt32 checkDicSize;
++  unsigned state;
++  UInt32 reps[4];
++  unsigned remainLen;
++  int needFlush;
++  int needInitState;
++  UInt32 numProbs;
++  unsigned tempBufSize;
++  Byte tempBuf[LZMA_REQUIRED_INPUT_MAX];
++} CLzmaDec;
++
++#define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; }
++
++void LzmaDec_Init(CLzmaDec *p);
++
++/* There are two types of LZMA streams:
++     0) Stream with end mark. That end mark adds about 6 bytes to compressed size.
++     1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */
++
++typedef enum
++{
++  LZMA_FINISH_ANY,   /* finish at any point */
++  LZMA_FINISH_END    /* block must be finished at the end */
++} ELzmaFinishMode;
++
++/* ELzmaFinishMode has meaning only if the decoding reaches output limit !!!
++
++   You must use LZMA_FINISH_END, when you know that current output buffer
++   covers last bytes of block. In other cases you must use LZMA_FINISH_ANY.
++
++   If LZMA decoder sees end marker before reaching output limit, it returns SZ_OK,
++   and output value of destLen will be less than output buffer size limit.
++   You can check status result also.
++
++   You can use multiple checks to test data integrity after full decompression:
++     1) Check Result and "status" variable.
++     2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize.
++     3) Check that output(srcLen) = compressedSize, if you know real compressedSize.
++        You must use correct finish mode in that case. */
++
++typedef enum
++{
++  LZMA_STATUS_NOT_SPECIFIED,               /* use main error code instead */
++  LZMA_STATUS_FINISHED_WITH_MARK,          /* stream was finished with end mark. */
++  LZMA_STATUS_NOT_FINISHED,                /* stream was not finished */
++  LZMA_STATUS_NEEDS_MORE_INPUT,            /* you must provide more input bytes */
++  LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK  /* there is probability that stream was finished without end mark */
++} ELzmaStatus;
++
++/* ELzmaStatus is used only as output value for function call */
++
++
++/* ---------- Interfaces ---------- */
++
++/* There are 3 levels of interfaces:
++     1) Dictionary Interface
++     2) Buffer Interface
++     3) One Call Interface
++   You can select any of these interfaces, but don't mix functions from different
++   groups for same object. */
++
++
++/* There are two variants to allocate state for Dictionary Interface:
++     1) LzmaDec_Allocate / LzmaDec_Free
++     2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs
++   You can use variant 2, if you set dictionary buffer manually.
++   For Buffer Interface you must always use variant 1.
++
++LzmaDec_Allocate* can return:
++  SZ_OK
++  SZ_ERROR_MEM         - Memory allocation error
++  SZ_ERROR_UNSUPPORTED - Unsupported properties
++*/
++   
++SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc);
++void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc);
++
++SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc);
++void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc);
++
++/* ---------- Dictionary Interface ---------- */
++
++/* You can use it, if you want to eliminate the overhead for data copying from
++   dictionary to some other external buffer.
++   You must work with CLzmaDec variables directly in this interface.
++
++   STEPS:
++     LzmaDec_Constr()
++     LzmaDec_Allocate()
++     for (each new stream)
++     {
++       LzmaDec_Init()
++       while (it needs more decompression)
++       {
++         LzmaDec_DecodeToDic()
++         use data from CLzmaDec::dic and update CLzmaDec::dicPos
++       }
++     }
++     LzmaDec_Free()
++*/
++
++/* LzmaDec_DecodeToDic
++   
++   The decoding to internal dictionary buffer (CLzmaDec::dic).
++   You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!!
++
++finishMode:
++  It has meaning only if the decoding reaches output limit (dicLimit).
++  LZMA_FINISH_ANY - Decode just dicLimit bytes.
++  LZMA_FINISH_END - Stream must be finished after dicLimit.
++
++Returns:
++  SZ_OK
++    status:
++      LZMA_STATUS_FINISHED_WITH_MARK
++      LZMA_STATUS_NOT_FINISHED
++      LZMA_STATUS_NEEDS_MORE_INPUT
++      LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
++  SZ_ERROR_DATA - Data error
++*/
++
++SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit,
++    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
++
++
++/* ---------- Buffer Interface ---------- */
++
++/* It's zlib-like interface.
++   See LzmaDec_DecodeToDic description for information about STEPS and return results,
++   but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need
++   to work with CLzmaDec variables manually.
++
++finishMode:
++  It has meaning only if the decoding reaches output limit (*destLen).
++  LZMA_FINISH_ANY - Decode just destLen bytes.
++  LZMA_FINISH_END - Stream must be finished after (*destLen).
++*/
++
++SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen,
++    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
++
++
++/* ---------- One Call Interface ---------- */
++
++/* LzmaDecode
++
++finishMode:
++  It has meaning only if the decoding reaches output limit (*destLen).
++  LZMA_FINISH_ANY - Decode just destLen bytes.
++  LZMA_FINISH_END - Stream must be finished after (*destLen).
++
++Returns:
++  SZ_OK
++    status:
++      LZMA_STATUS_FINISHED_WITH_MARK
++      LZMA_STATUS_NOT_FINISHED
++      LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
++  SZ_ERROR_DATA - Data error
++  SZ_ERROR_MEM  - Memory allocation error
++  SZ_ERROR_UNSUPPORTED - Unsupported properties
++  SZ_ERROR_INPUT_EOF - It needs more bytes in input buffer (src).
++*/
++
++SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
++    const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
++    ELzmaStatus *status, ISzAlloc *alloc);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif
+--- /dev/null
++++ b/include/linux/lzma/LzmaEnc.h
+@@ -0,0 +1,80 @@
++/*  LzmaEnc.h -- LZMA Encoder
++2009-02-07 : Igor Pavlov : Public domain */
++
++#ifndef __LZMA_ENC_H
++#define __LZMA_ENC_H
++
++#include "Types.h"
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#define LZMA_PROPS_SIZE 5
++
++typedef struct _CLzmaEncProps
++{
++  int level;       /*  0 <= level <= 9 */
++  UInt32 dictSize; /* (1 << 12) <= dictSize <= (1 << 27) for 32-bit version
++                      (1 << 12) <= dictSize <= (1 << 30) for 64-bit version
++                       default = (1 << 24) */
++  int lc;          /* 0 <= lc <= 8, default = 3 */
++  int lp;          /* 0 <= lp <= 4, default = 0 */
++  int pb;          /* 0 <= pb <= 4, default = 2 */
++  int algo;        /* 0 - fast, 1 - normal, default = 1 */
++  int fb;          /* 5 <= fb <= 273, default = 32 */
++  int btMode;      /* 0 - hashChain Mode, 1 - binTree mode - normal, default = 1 */
++  int numHashBytes; /* 2, 3 or 4, default = 4 */
++  UInt32 mc;        /* 1 <= mc <= (1 << 30), default = 32 */
++  unsigned writeEndMark;  /* 0 - do not write EOPM, 1 - write EOPM, default = 0 */
++  int numThreads;  /* 1 or 2, default = 2 */
++} CLzmaEncProps;
++
++void LzmaEncProps_Init(CLzmaEncProps *p);
++void LzmaEncProps_Normalize(CLzmaEncProps *p);
++UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2);
++
++
++/* ---------- CLzmaEncHandle Interface ---------- */
++
++/* LzmaEnc_* functions can return the following exit codes:
++Returns:
++  SZ_OK           - OK
++  SZ_ERROR_MEM    - Memory allocation error
++  SZ_ERROR_PARAM  - Incorrect paramater in props
++  SZ_ERROR_WRITE  - Write callback error.
++  SZ_ERROR_PROGRESS - some break from progress callback
++  SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version)
++*/
++
++typedef void * CLzmaEncHandle;
++
++CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc);
++void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig);
++SRes LzmaEnc_SetProps(CLzmaEncHandle p, const CLzmaEncProps *props);
++SRes LzmaEnc_WriteProperties(CLzmaEncHandle p, Byte *properties, SizeT *size);
++SRes LzmaEnc_Encode(CLzmaEncHandle p, ISeqOutStream *outStream, ISeqInStream *inStream,
++    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
++SRes LzmaEnc_MemEncode(CLzmaEncHandle p, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
++    int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
++
++/* ---------- One Call Interface ---------- */
++
++/* LzmaEncode
++Return code:
++  SZ_OK               - OK
++  SZ_ERROR_MEM        - Memory allocation error
++  SZ_ERROR_PARAM      - Incorrect paramater
++  SZ_ERROR_OUTPUT_EOF - output buffer overflow
++  SZ_ERROR_THREAD     - errors in multithreading functions (only for Mt version)
++*/
++
++SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
++    const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
++    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif
+--- /dev/null
++++ b/include/linux/lzma/Types.h
+@@ -0,0 +1,226 @@
++/* Types.h -- Basic types
++2009-11-23 : Igor Pavlov : Public domain */
++
++#ifndef __7Z_TYPES_H
++#define __7Z_TYPES_H
++
++#include <stddef.h>
++
++#ifdef _WIN32
++#include <windows.h>
++#endif
++
++#ifndef EXTERN_C_BEGIN
++#ifdef __cplusplus
++#define EXTERN_C_BEGIN extern "C" {
++#define EXTERN_C_END }
++#else
++#define EXTERN_C_BEGIN
++#define EXTERN_C_END
++#endif
++#endif
++
++EXTERN_C_BEGIN
++
++#define SZ_OK 0
++
++#define SZ_ERROR_DATA 1
++#define SZ_ERROR_MEM 2
++#define SZ_ERROR_CRC 3
++#define SZ_ERROR_UNSUPPORTED 4
++#define SZ_ERROR_PARAM 5
++#define SZ_ERROR_INPUT_EOF 6
++#define SZ_ERROR_OUTPUT_EOF 7
++#define SZ_ERROR_READ 8
++#define SZ_ERROR_WRITE 9
++#define SZ_ERROR_PROGRESS 10
++#define SZ_ERROR_FAIL 11
++#define SZ_ERROR_THREAD 12
++
++#define SZ_ERROR_ARCHIVE 16
++#define SZ_ERROR_NO_ARCHIVE 17
++
++typedef int SRes;
++
++#ifdef _WIN32
++typedef DWORD WRes;
++#else
++typedef int WRes;
++#endif
++
++#ifndef RINOK
++#define RINOK(x) { int __result__ = (x); if (__result__ != 0) return __result__; }
++#endif
++
++typedef unsigned char Byte;
++typedef short Int16;
++typedef unsigned short UInt16;
++
++#ifdef _LZMA_UINT32_IS_ULONG
++typedef long Int32;
++typedef unsigned long UInt32;
++#else
++typedef int Int32;
++typedef unsigned int UInt32;
++#endif
++
++#ifdef _SZ_NO_INT_64
++
++/* define _SZ_NO_INT_64, if your compiler doesn't support 64-bit integers.
++   NOTES: Some code will work incorrectly in that case! */
++
++typedef long Int64;
++typedef unsigned long UInt64;
++
++#else
++
++#if defined(_MSC_VER) || defined(__BORLANDC__)
++typedef __int64 Int64;
++typedef unsigned __int64 UInt64;
++#else
++typedef long long int Int64;
++typedef unsigned long long int UInt64;
++#endif
++
++#endif
++
++#ifdef _LZMA_NO_SYSTEM_SIZE_T
++typedef UInt32 SizeT;
++#else
++typedef size_t SizeT;
++#endif
++
++typedef int Bool;
++#define True 1
++#define False 0
++
++
++#ifdef _WIN32
++#define MY_STD_CALL __stdcall
++#else
++#define MY_STD_CALL
++#endif
++
++#ifdef _MSC_VER
++
++#if _MSC_VER >= 1300
++#define MY_NO_INLINE __declspec(noinline)
++#else
++#define MY_NO_INLINE
++#endif
++
++#define MY_CDECL __cdecl
++#define MY_FAST_CALL __fastcall
++
++#else
++
++#define MY_CDECL
++#define MY_FAST_CALL
++
++#endif
++
++
++/* The following interfaces use first parameter as pointer to structure */
++
++typedef struct
++{
++  SRes (*Read)(void *p, void *buf, size_t *size);
++    /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
++       (output(*size) < input(*size)) is allowed */
++} ISeqInStream;
++
++/* it can return SZ_ERROR_INPUT_EOF */
++SRes SeqInStream_Read(ISeqInStream *stream, void *buf, size_t size);
++SRes SeqInStream_Read2(ISeqInStream *stream, void *buf, size_t size, SRes errorType);
++SRes SeqInStream_ReadByte(ISeqInStream *stream, Byte *buf);
++
++typedef struct
++{
++  size_t (*Write)(void *p, const void *buf, size_t size);
++    /* Returns: result - the number of actually written bytes.
++       (result < size) means error */
++} ISeqOutStream;
++
++typedef enum
++{
++  SZ_SEEK_SET = 0,
++  SZ_SEEK_CUR = 1,
++  SZ_SEEK_END = 2
++} ESzSeek;
++
++typedef struct
++{
++  SRes (*Read)(void *p, void *buf, size_t *size);  /* same as ISeqInStream::Read */
++  SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
++} ISeekInStream;
++
++typedef struct
++{
++  SRes (*Look)(void *p, void **buf, size_t *size);
++    /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
++       (output(*size) > input(*size)) is not allowed
++       (output(*size) < input(*size)) is allowed */
++  SRes (*Skip)(void *p, size_t offset);
++    /* offset must be <= output(*size) of Look */
++
++  SRes (*Read)(void *p, void *buf, size_t *size);
++    /* reads directly (without buffer). It's same as ISeqInStream::Read */
++  SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
++} ILookInStream;
++
++SRes LookInStream_LookRead(ILookInStream *stream, void *buf, size_t *size);
++SRes LookInStream_SeekTo(ILookInStream *stream, UInt64 offset);
++
++/* reads via ILookInStream::Read */
++SRes LookInStream_Read2(ILookInStream *stream, void *buf, size_t size, SRes errorType);
++SRes LookInStream_Read(ILookInStream *stream, void *buf, size_t size);
++
++#define LookToRead_BUF_SIZE (1 << 14)
++
++typedef struct
++{
++  ILookInStream s;
++  ISeekInStream *realStream;
++  size_t pos;
++  size_t size;
++  Byte buf[LookToRead_BUF_SIZE];
++} CLookToRead;
++
++void LookToRead_CreateVTable(CLookToRead *p, int lookahead);
++void LookToRead_Init(CLookToRead *p);
++
++typedef struct
++{
++  ISeqInStream s;
++  ILookInStream *realStream;
++} CSecToLook;
++
++void SecToLook_CreateVTable(CSecToLook *p);
++
++typedef struct
++{
++  ISeqInStream s;
++  ILookInStream *realStream;
++} CSecToRead;
++
++void SecToRead_CreateVTable(CSecToRead *p);
++
++typedef struct
++{
++  SRes (*Progress)(void *p, UInt64 inSize, UInt64 outSize);
++    /* Returns: result. (result != SZ_OK) means break.
++       Value (UInt64)(Int64)-1 for size means unknown value. */
++} ICompressProgress;
++
++typedef struct
++{
++  void *(*Alloc)(void *p, size_t size);
++  void (*Free)(void *p, void *address); /* address can be 0 */
++} ISzAlloc;
++
++#define IAlloc_Alloc(p, size) (p)->Alloc((p), size)
++#define IAlloc_Free(p, a) (p)->Free((p), a)
++
++EXTERN_C_END
++
++#endif
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -103,6 +103,12 @@ config LZO_COMPRESS
+ config LZO_DECOMPRESS
+ 	tristate
+ 
++config LZMA_COMPRESS
++    tristate
++
++config LZMA_DECOMPRESS
++    tristate
++
+ #
+ # These all provide a common interface (hence the apparent duplication with
+ # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.)
+--- a/lib/Makefile
++++ b/lib/Makefile
+@@ -2,6 +2,16 @@
+ # Makefile for some libs needed in the kernel.
+ #
+ 
++ifdef CONFIG_JFFS2_ZLIB
++	CONFIG_ZLIB_INFLATE:=y
++	CONFIG_ZLIB_DEFLATE:=y
++endif
++
++ifdef CONFIG_JFFS2_LZMA
++	CONFIG_LZMA_DECOMPRESS:=y
++	CONFIG_LZMA_COMPRESS:=y
++endif
++
+ ifdef CONFIG_FUNCTION_TRACER
+ ORIG_CFLAGS := $(KBUILD_CFLAGS)
+ KBUILD_CFLAGS = $(subst -pg,,$(ORIG_CFLAGS))
+@@ -66,6 +76,8 @@ obj-$(CONFIG_ZLIB_DEFLATE) += zlib_defla
+ obj-$(CONFIG_REED_SOLOMON) += reed_solomon/
+ obj-$(CONFIG_LZO_COMPRESS) += lzo/
+ obj-$(CONFIG_LZO_DECOMPRESS) += lzo/
++obj-$(CONFIG_LZMA_COMPRESS) += lzma/
++obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/
+ 
+ lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
+ lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
+--- /dev/null
++++ b/lib/lzma/LzFind.c
+@@ -0,0 +1,761 @@
++/* LzFind.c -- Match finder for LZ algorithms
++2009-04-22 : Igor Pavlov : Public domain */
++
++#include <string.h>
++
++#include "LzFind.h"
++#include "LzHash.h"
++
++#define kEmptyHashValue 0
++#define kMaxValForNormalize ((UInt32)0xFFFFFFFF)
++#define kNormalizeStepMin (1 << 10) /* it must be power of 2 */
++#define kNormalizeMask (~(kNormalizeStepMin - 1))
++#define kMaxHistorySize ((UInt32)3 << 30)
++
++#define kStartMaxLen 3
++
++static void LzInWindow_Free(CMatchFinder *p, ISzAlloc *alloc)
++{
++  if (!p->directInput)
++  {
++    alloc->Free(alloc, p->bufferBase);
++    p->bufferBase = 0;
++  }
++}
++
++/* keepSizeBefore + keepSizeAfter + keepSizeReserv must be < 4G) */
++
++static int LzInWindow_Create(CMatchFinder *p, UInt32 keepSizeReserv, ISzAlloc *alloc)
++{
++  UInt32 blockSize = p->keepSizeBefore + p->keepSizeAfter + keepSizeReserv;
++  if (p->directInput)
++  {
++    p->blockSize = blockSize;
++    return 1;
++  }
++  if (p->bufferBase == 0 || p->blockSize != blockSize)
++  {
++    LzInWindow_Free(p, alloc);
++    p->blockSize = blockSize;
++    p->bufferBase = (Byte *)alloc->Alloc(alloc, (size_t)blockSize);
++  }
++  return (p->bufferBase != 0);
++}
++
++Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
++Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
++
++UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
++
++void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
++{
++  p->posLimit -= subValue;
++  p->pos -= subValue;
++  p->streamPos -= subValue;
++}
++
++static void MatchFinder_ReadBlock(CMatchFinder *p)
++{
++  if (p->streamEndWasReached || p->result != SZ_OK)
++    return;
++  if (p->directInput)
++  {
++    UInt32 curSize = 0xFFFFFFFF - p->streamPos;
++    if (curSize > p->directInputRem)
++      curSize = (UInt32)p->directInputRem;
++    p->directInputRem -= curSize;
++    p->streamPos += curSize;
++    if (p->directInputRem == 0)
++      p->streamEndWasReached = 1;
++    return;
++  }
++  for (;;)
++  {
++    Byte *dest = p->buffer + (p->streamPos - p->pos);
++    size_t size = (p->bufferBase + p->blockSize - dest);
++    if (size == 0)
++      return;
++    p->result = p->stream->Read(p->stream, dest, &size);
++    if (p->result != SZ_OK)
++      return;
++    if (size == 0)
++    {
++      p->streamEndWasReached = 1;
++      return;
++    }
++    p->streamPos += (UInt32)size;
++    if (p->streamPos - p->pos > p->keepSizeAfter)
++      return;
++  }
++}
++
++void MatchFinder_MoveBlock(CMatchFinder *p)
++{
++  memmove(p->bufferBase,
++    p->buffer - p->keepSizeBefore,
++    (size_t)(p->streamPos - p->pos + p->keepSizeBefore));
++  p->buffer = p->bufferBase + p->keepSizeBefore;
++}
++
++int MatchFinder_NeedMove(CMatchFinder *p)
++{
++  if (p->directInput)
++    return 0;
++  /* if (p->streamEndWasReached) return 0; */
++  return ((size_t)(p->bufferBase + p->blockSize - p->buffer) <= p->keepSizeAfter);
++}
++
++void MatchFinder_ReadIfRequired(CMatchFinder *p)
++{
++  if (p->streamEndWasReached)
++    return;
++  if (p->keepSizeAfter >= p->streamPos - p->pos)
++    MatchFinder_ReadBlock(p);
++}
++
++static void MatchFinder_CheckAndMoveAndRead(CMatchFinder *p)
++{
++  if (MatchFinder_NeedMove(p))
++    MatchFinder_MoveBlock(p);
++  MatchFinder_ReadBlock(p);
++}
++
++static void MatchFinder_SetDefaultSettings(CMatchFinder *p)
++{
++  p->cutValue = 32;
++  p->btMode = 1;
++  p->numHashBytes = 4;
++  p->bigHash = 0;
++}
++
++#define kCrcPoly 0xEDB88320
++
++void MatchFinder_Construct(CMatchFinder *p)
++{
++  UInt32 i;
++  p->bufferBase = 0;
++  p->directInput = 0;
++  p->hash = 0;
++  MatchFinder_SetDefaultSettings(p);
++
++  for (i = 0; i < 256; i++)
++  {
++    UInt32 r = i;
++    int j;
++    for (j = 0; j < 8; j++)
++      r = (r >> 1) ^ (kCrcPoly & ~((r & 1) - 1));
++    p->crc[i] = r;
++  }
++}
++
++static void MatchFinder_FreeThisClassMemory(CMatchFinder *p, ISzAlloc *alloc)
++{
++  alloc->Free(alloc, p->hash);
++  p->hash = 0;
++}
++
++void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc)
++{
++  MatchFinder_FreeThisClassMemory(p, alloc);
++  LzInWindow_Free(p, alloc);
++}
++
++static CLzRef* AllocRefs(UInt32 num, ISzAlloc *alloc)
++{
++  size_t sizeInBytes = (size_t)num * sizeof(CLzRef);
++  if (sizeInBytes / sizeof(CLzRef) != num)
++    return 0;
++  return (CLzRef *)alloc->Alloc(alloc, sizeInBytes);
++}
++
++int MatchFinder_Create(CMatchFinder *p, UInt32 historySize,
++    UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
++    ISzAlloc *alloc)
++{
++  UInt32 sizeReserv;
++  if (historySize > kMaxHistorySize)
++  {
++    MatchFinder_Free(p, alloc);
++    return 0;
++  }
++  sizeReserv = historySize >> 1;
++  if (historySize > ((UInt32)2 << 30))
++    sizeReserv = historySize >> 2;
++  sizeReserv += (keepAddBufferBefore + matchMaxLen + keepAddBufferAfter) / 2 + (1 << 19);
++
++  p->keepSizeBefore = historySize + keepAddBufferBefore + 1;
++  p->keepSizeAfter = matchMaxLen + keepAddBufferAfter;
++  /* we need one additional byte, since we use MoveBlock after pos++ and before dictionary using */
++  if (LzInWindow_Create(p, sizeReserv, alloc))
++  {
++    UInt32 newCyclicBufferSize = historySize + 1;
++    UInt32 hs;
++    p->matchMaxLen = matchMaxLen;
++    {
++      p->fixedHashSize = 0;
++      if (p->numHashBytes == 2)
++        hs = (1 << 16) - 1;
++      else
++      {
++        hs = historySize - 1;
++        hs |= (hs >> 1);
++        hs |= (hs >> 2);
++        hs |= (hs >> 4);
++        hs |= (hs >> 8);
++        hs >>= 1;
++        hs |= 0xFFFF; /* don't change it! It's required for Deflate */
++        if (hs > (1 << 24))
++        {
++          if (p->numHashBytes == 3)
++            hs = (1 << 24) - 1;
++          else
++            hs >>= 1;
++        }
++      }
++      p->hashMask = hs;
++      hs++;
++      if (p->numHashBytes > 2) p->fixedHashSize += kHash2Size;
++      if (p->numHashBytes > 3) p->fixedHashSize += kHash3Size;
++      if (p->numHashBytes > 4) p->fixedHashSize += kHash4Size;
++      hs += p->fixedHashSize;
++    }
++
++    {
++      UInt32 prevSize = p->hashSizeSum + p->numSons;
++      UInt32 newSize;
++      p->historySize = historySize;
++      p->hashSizeSum = hs;
++      p->cyclicBufferSize = newCyclicBufferSize;
++      p->numSons = (p->btMode ? newCyclicBufferSize * 2 : newCyclicBufferSize);
++      newSize = p->hashSizeSum + p->numSons;
++      if (p->hash != 0 && prevSize == newSize)
++        return 1;
++      MatchFinder_FreeThisClassMemory(p, alloc);
++      p->hash = AllocRefs(newSize, alloc);
++      if (p->hash != 0)
++      {
++        p->son = p->hash + p->hashSizeSum;
++        return 1;
++      }
++    }
++  }
++  MatchFinder_Free(p, alloc);
++  return 0;
++}
++
++static void MatchFinder_SetLimits(CMatchFinder *p)
++{
++  UInt32 limit = kMaxValForNormalize - p->pos;
++  UInt32 limit2 = p->cyclicBufferSize - p->cyclicBufferPos;
++  if (limit2 < limit)
++    limit = limit2;
++  limit2 = p->streamPos - p->pos;
++  if (limit2 <= p->keepSizeAfter)
++  {
++    if (limit2 > 0)
++      limit2 = 1;
++  }
++  else
++    limit2 -= p->keepSizeAfter;
++  if (limit2 < limit)
++    limit = limit2;
++  {
++    UInt32 lenLimit = p->streamPos - p->pos;
++    if (lenLimit > p->matchMaxLen)
++      lenLimit = p->matchMaxLen;
++    p->lenLimit = lenLimit;
++  }
++  p->posLimit = p->pos + limit;
++}
++
++void MatchFinder_Init(CMatchFinder *p)
++{
++  UInt32 i;
++  for (i = 0; i < p->hashSizeSum; i++)
++    p->hash[i] = kEmptyHashValue;
++  p->cyclicBufferPos = 0;
++  p->buffer = p->bufferBase;
++  p->pos = p->streamPos = p->cyclicBufferSize;
++  p->result = SZ_OK;
++  p->streamEndWasReached = 0;
++  MatchFinder_ReadBlock(p);
++  MatchFinder_SetLimits(p);
++}
++
++static UInt32 MatchFinder_GetSubValue(CMatchFinder *p)
++{
++  return (p->pos - p->historySize - 1) & kNormalizeMask;
++}
++
++void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
++{
++  UInt32 i;
++  for (i = 0; i < numItems; i++)
++  {
++    UInt32 value = items[i];
++    if (value <= subValue)
++      value = kEmptyHashValue;
++    else
++      value -= subValue;
++    items[i] = value;
++  }
++}
++
++static void MatchFinder_Normalize(CMatchFinder *p)
++{
++  UInt32 subValue = MatchFinder_GetSubValue(p);
++  MatchFinder_Normalize3(subValue, p->hash, p->hashSizeSum + p->numSons);
++  MatchFinder_ReduceOffsets(p, subValue);
++}
++
++static void MatchFinder_CheckLimits(CMatchFinder *p)
++{
++  if (p->pos == kMaxValForNormalize)
++    MatchFinder_Normalize(p);
++  if (!p->streamEndWasReached && p->keepSizeAfter == p->streamPos - p->pos)
++    MatchFinder_CheckAndMoveAndRead(p);
++  if (p->cyclicBufferPos == p->cyclicBufferSize)
++    p->cyclicBufferPos = 0;
++  MatchFinder_SetLimits(p);
++}
++
++static UInt32 * Hc_GetMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
++    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
++    UInt32 *distances, UInt32 maxLen)
++{
++  son[_cyclicBufferPos] = curMatch;
++  for (;;)
++  {
++    UInt32 delta = pos - curMatch;
++    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
++      return distances;
++    {
++      const Byte *pb = cur - delta;
++      curMatch = son[_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)];
++      if (pb[maxLen] == cur[maxLen] && *pb == *cur)
++      {
++        UInt32 len = 0;
++        while (++len != lenLimit)
++          if (pb[len] != cur[len])
++            break;
++        if (maxLen < len)
++        {
++          *distances++ = maxLen = len;
++          *distances++ = delta - 1;
++          if (len == lenLimit)
++            return distances;
++        }
++      }
++    }
++  }
++}
++
++UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
++    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
++    UInt32 *distances, UInt32 maxLen)
++{
++  CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1;
++  CLzRef *ptr1 = son + (_cyclicBufferPos << 1);
++  UInt32 len0 = 0, len1 = 0;
++  for (;;)
++  {
++    UInt32 delta = pos - curMatch;
++    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
++    {
++      *ptr0 = *ptr1 = kEmptyHashValue;
++      return distances;
++    }
++    {
++      CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1);
++      const Byte *pb = cur - delta;
++      UInt32 len = (len0 < len1 ? len0 : len1);
++      if (pb[len] == cur[len])
++      {
++        if (++len != lenLimit && pb[len] == cur[len])
++          while (++len != lenLimit)
++            if (pb[len] != cur[len])
++              break;
++        if (maxLen < len)
++        {
++          *distances++ = maxLen = len;
++          *distances++ = delta - 1;
++          if (len == lenLimit)
++          {
++            *ptr1 = pair[0];
++            *ptr0 = pair[1];
++            return distances;
++          }
++        }
++      }
++      if (pb[len] < cur[len])
++      {
++        *ptr1 = curMatch;
++        ptr1 = pair + 1;
++        curMatch = *ptr1;
++        len1 = len;
++      }
++      else
++      {
++        *ptr0 = curMatch;
++        ptr0 = pair;
++        curMatch = *ptr0;
++        len0 = len;
++      }
++    }
++  }
++}
++
++static void SkipMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
++    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue)
++{
++  CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1;
++  CLzRef *ptr1 = son + (_cyclicBufferPos << 1);
++  UInt32 len0 = 0, len1 = 0;
++  for (;;)
++  {
++    UInt32 delta = pos - curMatch;
++    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
++    {
++      *ptr0 = *ptr1 = kEmptyHashValue;
++      return;
++    }
++    {
++      CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1);
++      const Byte *pb = cur - delta;
++      UInt32 len = (len0 < len1 ? len0 : len1);
++      if (pb[len] == cur[len])
++      {
++        while (++len != lenLimit)
++          if (pb[len] != cur[len])
++            break;
++        {
++          if (len == lenLimit)
++          {
++            *ptr1 = pair[0];
++            *ptr0 = pair[1];
++            return;
++          }
++        }
++      }
++      if (pb[len] < cur[len])
++      {
++        *ptr1 = curMatch;
++        ptr1 = pair + 1;
++        curMatch = *ptr1;
++        len1 = len;
++      }
++      else
++      {
++        *ptr0 = curMatch;
++        ptr0 = pair;
++        curMatch = *ptr0;
++        len0 = len;
++      }
++    }
++  }
++}
++
++#define MOVE_POS \
++  ++p->cyclicBufferPos; \
++  p->buffer++; \
++  if (++p->pos == p->posLimit) MatchFinder_CheckLimits(p);
++
++#define MOVE_POS_RET MOVE_POS return offset;
++
++static void MatchFinder_MovePos(CMatchFinder *p) { MOVE_POS; }
++
++#define GET_MATCHES_HEADER2(minLen, ret_op) \
++  UInt32 lenLimit; UInt32 hashValue; const Byte *cur; UInt32 curMatch; \
++  lenLimit = p->lenLimit; { if (lenLimit < minLen) { MatchFinder_MovePos(p); ret_op; }} \
++  cur = p->buffer;
++
++#define GET_MATCHES_HEADER(minLen) GET_MATCHES_HEADER2(minLen, return 0)
++#define SKIP_HEADER(minLen)        GET_MATCHES_HEADER2(minLen, continue)
++
++#define MF_PARAMS(p) p->pos, p->buffer, p->son, p->cyclicBufferPos, p->cyclicBufferSize, p->cutValue
++
++#define GET_MATCHES_FOOTER(offset, maxLen) \
++  offset = (UInt32)(GetMatchesSpec1(lenLimit, curMatch, MF_PARAMS(p), \
++  distances + offset, maxLen) - distances); MOVE_POS_RET;
++
++#define SKIP_FOOTER \
++  SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MOVE_POS;
++
++static UInt32 Bt2_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++  UInt32 offset;
++  GET_MATCHES_HEADER(2)
++  HASH2_CALC;
++  curMatch = p->hash[hashValue];
++  p->hash[hashValue] = p->pos;
++  offset = 0;
++  GET_MATCHES_FOOTER(offset, 1)
++}
++
++UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++  UInt32 offset;
++  GET_MATCHES_HEADER(3)
++  HASH_ZIP_CALC;
++  curMatch = p->hash[hashValue];
++  p->hash[hashValue] = p->pos;
++  offset = 0;
++  GET_MATCHES_FOOTER(offset, 2)
++}
++
++static UInt32 Bt3_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++  UInt32 hash2Value, delta2, maxLen, offset;
++  GET_MATCHES_HEADER(3)
++
++  HASH3_CALC;
++
++  delta2 = p->pos - p->hash[hash2Value];
++  curMatch = p->hash[kFix3HashSize + hashValue];
++  
++  p->hash[hash2Value] =
++  p->hash[kFix3HashSize + hashValue] = p->pos;
++
++
++  maxLen = 2;
++  offset = 0;
++  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
++  {
++    for (; maxLen != lenLimit; maxLen++)
++      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
++        break;
++    distances[0] = maxLen;
++    distances[1] = delta2 - 1;
++    offset = 2;
++    if (maxLen == lenLimit)
++    {
++      SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
++      MOVE_POS_RET;
++    }
++  }
++  GET_MATCHES_FOOTER(offset, maxLen)
++}
++
++static UInt32 Bt4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++  UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
++  GET_MATCHES_HEADER(4)
++
++  HASH4_CALC;
++
++  delta2 = p->pos - p->hash[                hash2Value];
++  delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
++  curMatch = p->hash[kFix4HashSize + hashValue];
++  
++  p->hash[                hash2Value] =
++  p->hash[kFix3HashSize + hash3Value] =
++  p->hash[kFix4HashSize + hashValue] = p->pos;
++
++  maxLen = 1;
++  offset = 0;
++  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
++  {
++    distances[0] = maxLen = 2;
++    distances[1] = delta2 - 1;
++    offset = 2;
++  }
++  if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
++  {
++    maxLen = 3;
++    distances[offset + 1] = delta3 - 1;
++    offset += 2;
++    delta2 = delta3;
++  }
++  if (offset != 0)
++  {
++    for (; maxLen != lenLimit; maxLen++)
++      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
++        break;
++    distances[offset - 2] = maxLen;
++    if (maxLen == lenLimit)
++    {
++      SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
++      MOVE_POS_RET;
++    }
++  }
++  if (maxLen < 3)
++    maxLen = 3;
++  GET_MATCHES_FOOTER(offset, maxLen)
++}
++
++static UInt32 Hc4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++  UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
++  GET_MATCHES_HEADER(4)
++
++  HASH4_CALC;
++
++  delta2 = p->pos - p->hash[                hash2Value];
++  delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
++  curMatch = p->hash[kFix4HashSize + hashValue];
++
++  p->hash[                hash2Value] =
++  p->hash[kFix3HashSize + hash3Value] =
++  p->hash[kFix4HashSize + hashValue] = p->pos;
++
++  maxLen = 1;
++  offset = 0;
++  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
++  {
++    distances[0] = maxLen = 2;
++    distances[1] = delta2 - 1;
++    offset = 2;
++  }
++  if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
++  {
++    maxLen = 3;
++    distances[offset + 1] = delta3 - 1;
++    offset += 2;
++    delta2 = delta3;
++  }
++  if (offset != 0)
++  {
++    for (; maxLen != lenLimit; maxLen++)
++      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
++        break;
++    distances[offset - 2] = maxLen;
++    if (maxLen == lenLimit)
++    {
++      p->son[p->cyclicBufferPos] = curMatch;
++      MOVE_POS_RET;
++    }
++  }
++  if (maxLen < 3)
++    maxLen = 3;
++  offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
++    distances + offset, maxLen) - (distances));
++  MOVE_POS_RET
++}
++
++UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++  UInt32 offset;
++  GET_MATCHES_HEADER(3)
++  HASH_ZIP_CALC;
++  curMatch = p->hash[hashValue];
++  p->hash[hashValue] = p->pos;
++  offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
++    distances, 2) - (distances));
++  MOVE_POS_RET
++}
++
++static void Bt2_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++  do
++  {
++    SKIP_HEADER(2)
++    HASH2_CALC;
++    curMatch = p->hash[hashValue];
++    p->hash[hashValue] = p->pos;
++    SKIP_FOOTER
++  }
++  while (--num != 0);
++}
++
++void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++  do
++  {
++    SKIP_HEADER(3)
++    HASH_ZIP_CALC;
++    curMatch = p->hash[hashValue];
++    p->hash[hashValue] = p->pos;
++    SKIP_FOOTER
++  }
++  while (--num != 0);
++}
++
++static void Bt3_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++  do
++  {
++    UInt32 hash2Value;
++    SKIP_HEADER(3)
++    HASH3_CALC;
++    curMatch = p->hash[kFix3HashSize + hashValue];
++    p->hash[hash2Value] =
++    p->hash[kFix3HashSize + hashValue] = p->pos;
++    SKIP_FOOTER
++  }
++  while (--num != 0);
++}
++
++static void Bt4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++  do
++  {
++    UInt32 hash2Value, hash3Value;
++    SKIP_HEADER(4)
++    HASH4_CALC;
++    curMatch = p->hash[kFix4HashSize + hashValue];
++    p->hash[                hash2Value] =
++    p->hash[kFix3HashSize + hash3Value] = p->pos;
++    p->hash[kFix4HashSize + hashValue] = p->pos;
++    SKIP_FOOTER
++  }
++  while (--num != 0);
++}
++
++static void Hc4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++  do
++  {
++    UInt32 hash2Value, hash3Value;
++    SKIP_HEADER(4)
++    HASH4_CALC;
++    curMatch = p->hash[kFix4HashSize + hashValue];
++    p->hash[                hash2Value] =
++    p->hash[kFix3HashSize + hash3Value] =
++    p->hash[kFix4HashSize + hashValue] = p->pos;
++    p->son[p->cyclicBufferPos] = curMatch;
++    MOVE_POS
++  }
++  while (--num != 0);
++}
++
++void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++  do
++  {
++    SKIP_HEADER(3)
++    HASH_ZIP_CALC;
++    curMatch = p->hash[hashValue];
++    p->hash[hashValue] = p->pos;
++    p->son[p->cyclicBufferPos] = curMatch;
++    MOVE_POS
++  }
++  while (--num != 0);
++}
++
++void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable)
++{
++  vTable->Init = (Mf_Init_Func)MatchFinder_Init;
++  vTable->GetIndexByte = (Mf_GetIndexByte_Func)MatchFinder_GetIndexByte;
++  vTable->GetNumAvailableBytes = (Mf_GetNumAvailableBytes_Func)MatchFinder_GetNumAvailableBytes;
++  vTable->GetPointerToCurrentPos = (Mf_GetPointerToCurrentPos_Func)MatchFinder_GetPointerToCurrentPos;
++  if (!p->btMode)
++  {
++    vTable->GetMatches = (Mf_GetMatches_Func)Hc4_MatchFinder_GetMatches;
++    vTable->Skip = (Mf_Skip_Func)Hc4_MatchFinder_Skip;
++  }
++  else if (p->numHashBytes == 2)
++  {
++    vTable->GetMatches = (Mf_GetMatches_Func)Bt2_MatchFinder_GetMatches;
++    vTable->Skip = (Mf_Skip_Func)Bt2_MatchFinder_Skip;
++  }
++  else if (p->numHashBytes == 3)
++  {
++    vTable->GetMatches = (Mf_GetMatches_Func)Bt3_MatchFinder_GetMatches;
++    vTable->Skip = (Mf_Skip_Func)Bt3_MatchFinder_Skip;
++  }
++  else
++  {
++    vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches;
++    vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip;
++  }
++}
+--- /dev/null
++++ b/lib/lzma/LzmaDec.c
+@@ -0,0 +1,999 @@
++/* LzmaDec.c -- LZMA Decoder
++2009-09-20 : Igor Pavlov : Public domain */
++
++#include "LzmaDec.h"
++
++#include <string.h>
++
++#define kNumTopBits 24
++#define kTopValue ((UInt32)1 << kNumTopBits)
++
++#define kNumBitModelTotalBits 11
++#define kBitModelTotal (1 << kNumBitModelTotalBits)
++#define kNumMoveBits 5
++
++#define RC_INIT_SIZE 5
++
++#define NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | (*buf++); }
++
++#define IF_BIT_0(p) ttt = *(p); NORMALIZE; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
++#define UPDATE_0(p) range = bound; *(p) = (CLzmaProb)(ttt + ((kBitModelTotal - ttt) >> kNumMoveBits));
++#define UPDATE_1(p) range -= bound; code -= bound; *(p) = (CLzmaProb)(ttt - (ttt >> kNumMoveBits));
++#define GET_BIT2(p, i, A0, A1) IF_BIT_0(p) \
++  { UPDATE_0(p); i = (i + i); A0; } else \
++  { UPDATE_1(p); i = (i + i) + 1; A1; }
++#define GET_BIT(p, i) GET_BIT2(p, i, ; , ;)
++
++#define TREE_GET_BIT(probs, i) { GET_BIT((probs + i), i); }
++#define TREE_DECODE(probs, limit, i) \
++  { i = 1; do { TREE_GET_BIT(probs, i); } while (i < limit); i -= limit; }
++
++/* #define _LZMA_SIZE_OPT */
++
++#ifdef _LZMA_SIZE_OPT
++#define TREE_6_DECODE(probs, i) TREE_DECODE(probs, (1 << 6), i)
++#else
++#define TREE_6_DECODE(probs, i) \
++  { i = 1; \
++  TREE_GET_BIT(probs, i); \
++  TREE_GET_BIT(probs, i); \
++  TREE_GET_BIT(probs, i); \
++  TREE_GET_BIT(probs, i); \
++  TREE_GET_BIT(probs, i); \
++  TREE_GET_BIT(probs, i); \
++  i -= 0x40; }
++#endif
++
++#define NORMALIZE_CHECK if (range < kTopValue) { if (buf >= bufLimit) return DUMMY_ERROR; range <<= 8; code = (code << 8) | (*buf++); }
++
++#define IF_BIT_0_CHECK(p) ttt = *(p); NORMALIZE_CHECK; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
++#define UPDATE_0_CHECK range = bound;
++#define UPDATE_1_CHECK range -= bound; code -= bound;
++#define GET_BIT2_CHECK(p, i, A0, A1) IF_BIT_0_CHECK(p) \
++  { UPDATE_0_CHECK; i = (i + i); A0; } else \
++  { UPDATE_1_CHECK; i = (i + i) + 1; A1; }
++#define GET_BIT_CHECK(p, i) GET_BIT2_CHECK(p, i, ; , ;)
++#define TREE_DECODE_CHECK(probs, limit, i) \
++  { i = 1; do { GET_BIT_CHECK(probs + i, i) } while (i < limit); i -= limit; }
++
++
++#define kNumPosBitsMax 4
++#define kNumPosStatesMax (1 << kNumPosBitsMax)
++
++#define kLenNumLowBits 3
++#define kLenNumLowSymbols (1 << kLenNumLowBits)
++#define kLenNumMidBits 3
++#define kLenNumMidSymbols (1 << kLenNumMidBits)
++#define kLenNumHighBits 8
++#define kLenNumHighSymbols (1 << kLenNumHighBits)
++
++#define LenChoice 0
++#define LenChoice2 (LenChoice + 1)
++#define LenLow (LenChoice2 + 1)
++#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
++#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
++#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
++
++
++#define kNumStates 12
++#define kNumLitStates 7
++
++#define kStartPosModelIndex 4
++#define kEndPosModelIndex 14
++#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
++
++#define kNumPosSlotBits 6
++#define kNumLenToPosStates 4
++
++#define kNumAlignBits 4
++#define kAlignTableSize (1 << kNumAlignBits)
++
++#define kMatchMinLen 2
++#define kMatchSpecLenStart (kMatchMinLen + kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols)
++
++#define IsMatch 0
++#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
++#define IsRepG0 (IsRep + kNumStates)
++#define IsRepG1 (IsRepG0 + kNumStates)
++#define IsRepG2 (IsRepG1 + kNumStates)
++#define IsRep0Long (IsRepG2 + kNumStates)
++#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
++#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
++#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
++#define LenCoder (Align + kAlignTableSize)
++#define RepLenCoder (LenCoder + kNumLenProbs)
++#define Literal (RepLenCoder + kNumLenProbs)
++
++#define LZMA_BASE_SIZE 1846
++#define LZMA_LIT_SIZE 768
++
++#define LzmaProps_GetNumProbs(p) ((UInt32)LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((p)->lc + (p)->lp)))
++
++#if Literal != LZMA_BASE_SIZE
++StopCompilingDueBUG
++#endif
++
++#define LZMA_DIC_MIN (1 << 12)
++
++/* First LZMA-symbol is always decoded.
++And it decodes new LZMA-symbols while (buf < bufLimit), but "buf" is without last normalization
++Out:
++  Result:
++    SZ_OK - OK
++    SZ_ERROR_DATA - Error
++  p->remainLen:
++    < kMatchSpecLenStart : normal remain
++    = kMatchSpecLenStart : finished
++    = kMatchSpecLenStart + 1 : Flush marker
++    = kMatchSpecLenStart + 2 : State Init Marker
++*/
++
++static int MY_FAST_CALL LzmaDec_DecodeReal(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
++{
++  CLzmaProb *probs = p->probs;
++
++  unsigned state = p->state;
++  UInt32 rep0 = p->reps[0], rep1 = p->reps[1], rep2 = p->reps[2], rep3 = p->reps[3];
++  unsigned pbMask = ((unsigned)1 << (p->prop.pb)) - 1;
++  unsigned lpMask = ((unsigned)1 << (p->prop.lp)) - 1;
++  unsigned lc = p->prop.lc;
++
++  Byte *dic = p->dic;
++  SizeT dicBufSize = p->dicBufSize;
++  SizeT dicPos = p->dicPos;
++  
++  UInt32 processedPos = p->processedPos;
++  UInt32 checkDicSize = p->checkDicSize;
++  unsigned len = 0;
++
++  const Byte *buf = p->buf;
++  UInt32 range = p->range;
++  UInt32 code = p->code;
++
++  do
++  {
++    CLzmaProb *prob;
++    UInt32 bound;
++    unsigned ttt;
++    unsigned posState = processedPos & pbMask;
++
++    prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
++    IF_BIT_0(prob)
++    {
++      unsigned symbol;
++      UPDATE_0(prob);
++      prob = probs + Literal;
++      if (checkDicSize != 0 || processedPos != 0)
++        prob += (LZMA_LIT_SIZE * (((processedPos & lpMask) << lc) +
++        (dic[(dicPos == 0 ? dicBufSize : dicPos) - 1] >> (8 - lc))));
++
++      if (state < kNumLitStates)
++      {
++        state -= (state < 4) ? state : 3;
++        symbol = 1;
++        do { GET_BIT(prob + symbol, symbol) } while (symbol < 0x100);
++      }
++      else
++      {
++        unsigned matchByte = p->dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
++        unsigned offs = 0x100;
++        state -= (state < 10) ? 3 : 6;
++        symbol = 1;
++        do
++        {
++          unsigned bit;
++          CLzmaProb *probLit;
++          matchByte <<= 1;
++          bit = (matchByte & offs);
++          probLit = prob + offs + bit + symbol;
++          GET_BIT2(probLit, symbol, offs &= ~bit, offs &= bit)
++        }
++        while (symbol < 0x100);
++      }
++      dic[dicPos++] = (Byte)symbol;
++      processedPos++;
++      continue;
++    }
++    else
++    {
++      UPDATE_1(prob);
++      prob = probs + IsRep + state;
++      IF_BIT_0(prob)
++      {
++        UPDATE_0(prob);
++        state += kNumStates;
++        prob = probs + LenCoder;
++      }
++      else
++      {
++        UPDATE_1(prob);
++        if (checkDicSize == 0 && processedPos == 0)
++          return SZ_ERROR_DATA;
++        prob = probs + IsRepG0 + state;
++        IF_BIT_0(prob)
++        {
++          UPDATE_0(prob);
++          prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
++          IF_BIT_0(prob)
++          {
++            UPDATE_0(prob);
++            dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
++            dicPos++;
++            processedPos++;
++            state = state < kNumLitStates ? 9 : 11;
++            continue;
++          }
++          UPDATE_1(prob);
++        }
++        else
++        {
++          UInt32 distance;
++          UPDATE_1(prob);
++          prob = probs + IsRepG1 + state;
++          IF_BIT_0(prob)
++          {
++            UPDATE_0(prob);
++            distance = rep1;
++          }
++          else
++          {
++            UPDATE_1(prob);
++            prob = probs + IsRepG2 + state;
++            IF_BIT_0(prob)
++            {
++              UPDATE_0(prob);
++              distance = rep2;
++            }
++            else
++            {
++              UPDATE_1(prob);
++              distance = rep3;
++              rep3 = rep2;
++            }
++            rep2 = rep1;
++          }
++          rep1 = rep0;
++          rep0 = distance;
++        }
++        state = state < kNumLitStates ? 8 : 11;
++        prob = probs + RepLenCoder;
++      }
++      {
++        unsigned limit, offset;
++        CLzmaProb *probLen = prob + LenChoice;
++        IF_BIT_0(probLen)
++        {
++          UPDATE_0(probLen);
++          probLen = prob + LenLow + (posState << kLenNumLowBits);
++          offset = 0;
++          limit = (1 << kLenNumLowBits);
++        }
++        else
++        {
++          UPDATE_1(probLen);
++          probLen = prob + LenChoice2;
++          IF_BIT_0(probLen)
++          {
++            UPDATE_0(probLen);
++            probLen = prob + LenMid + (posState << kLenNumMidBits);
++            offset = kLenNumLowSymbols;
++            limit = (1 << kLenNumMidBits);
++          }
++          else
++          {
++            UPDATE_1(probLen);
++            probLen = prob + LenHigh;
++            offset = kLenNumLowSymbols + kLenNumMidSymbols;
++            limit = (1 << kLenNumHighBits);
++          }
++        }
++        TREE_DECODE(probLen, limit, len);
++        len += offset;
++      }
++
++      if (state >= kNumStates)
++      {
++        UInt32 distance;
++        prob = probs + PosSlot +
++            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << kNumPosSlotBits);
++        TREE_6_DECODE(prob, distance);
++        if (distance >= kStartPosModelIndex)
++        {
++          unsigned posSlot = (unsigned)distance;
++          int numDirectBits = (int)(((distance >> 1) - 1));
++          distance = (2 | (distance & 1));
++          if (posSlot < kEndPosModelIndex)
++          {
++            distance <<= numDirectBits;
++            prob = probs + SpecPos + distance - posSlot - 1;
++            {
++              UInt32 mask = 1;
++              unsigned i = 1;
++              do
++              {
++                GET_BIT2(prob + i, i, ; , distance |= mask);
++                mask <<= 1;
++              }
++              while (--numDirectBits != 0);
++            }
++          }
++          else
++          {
++            numDirectBits -= kNumAlignBits;
++            do
++            {
++              NORMALIZE
++              range >>= 1;
++              
++              {
++                UInt32 t;
++                code -= range;
++                t = (0 - ((UInt32)code >> 31)); /* (UInt32)((Int32)code >> 31) */
++                distance = (distance << 1) + (t + 1);
++                code += range & t;
++              }
++              /*
++              distance <<= 1;
++              if (code >= range)
++              {
++                code -= range;
++                distance |= 1;
++              }
++              */
++            }
++            while (--numDirectBits != 0);
++            prob = probs + Align;
++            distance <<= kNumAlignBits;
++            {
++              unsigned i = 1;
++              GET_BIT2(prob + i, i, ; , distance |= 1);
++              GET_BIT2(prob + i, i, ; , distance |= 2);
++              GET_BIT2(prob + i, i, ; , distance |= 4);
++              GET_BIT2(prob + i, i, ; , distance |= 8);
++            }
++            if (distance == (UInt32)0xFFFFFFFF)
++            {
++              len += kMatchSpecLenStart;
++              state -= kNumStates;
++              break;
++            }
++          }
++        }
++        rep3 = rep2;
++        rep2 = rep1;
++        rep1 = rep0;
++        rep0 = distance + 1;
++        if (checkDicSize == 0)
++        {
++          if (distance >= processedPos)
++            return SZ_ERROR_DATA;
++        }
++        else if (distance >= checkDicSize)
++          return SZ_ERROR_DATA;
++        state = (state < kNumStates + kNumLitStates) ? kNumLitStates : kNumLitStates + 3;
++      }
++
++      len += kMatchMinLen;
++
++      if (limit == dicPos)
++        return SZ_ERROR_DATA;
++      {
++        SizeT rem = limit - dicPos;
++        unsigned curLen = ((rem < len) ? (unsigned)rem : len);
++        SizeT pos = (dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0);
++
++        processedPos += curLen;
++
++        len -= curLen;
++        if (pos + curLen <= dicBufSize)
++        {
++          Byte *dest = dic + dicPos;
++          ptrdiff_t src = (ptrdiff_t)pos - (ptrdiff_t)dicPos;
++          const Byte *lim = dest + curLen;
++          dicPos += curLen;
++          do
++            *(dest) = (Byte)*(dest + src);
++          while (++dest != lim);
++        }
++        else
++        {
++          do
++          {
++            dic[dicPos++] = dic[pos];
++            if (++pos == dicBufSize)
++              pos = 0;
++          }
++          while (--curLen != 0);
++        }
++      }
++    }
++  }
++  while (dicPos < limit && buf < bufLimit);
++  NORMALIZE;
++  p->buf = buf;
++  p->range = range;
++  p->code = code;
++  p->remainLen = len;
++  p->dicPos = dicPos;
++  p->processedPos = processedPos;
++  p->reps[0] = rep0;
++  p->reps[1] = rep1;
++  p->reps[2] = rep2;
++  p->reps[3] = rep3;
++  p->state = state;
++
++  return SZ_OK;
++}
++
++static void MY_FAST_CALL LzmaDec_WriteRem(CLzmaDec *p, SizeT limit)
++{
++  if (p->remainLen != 0 && p->remainLen < kMatchSpecLenStart)
++  {
++    Byte *dic = p->dic;
++    SizeT dicPos = p->dicPos;
++    SizeT dicBufSize = p->dicBufSize;
++    unsigned len = p->remainLen;
++    UInt32 rep0 = p->reps[0];
++    if (limit - dicPos < len)
++      len = (unsigned)(limit - dicPos);
++
++    if (p->checkDicSize == 0 && p->prop.dicSize - p->processedPos <= len)
++      p->checkDicSize = p->prop.dicSize;
++
++    p->processedPos += len;
++    p->remainLen -= len;
++    while (len-- != 0)
++    {
++      dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
++      dicPos++;
++    }
++    p->dicPos = dicPos;
++  }
++}
++
++static int MY_FAST_CALL LzmaDec_DecodeReal2(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
++{
++  do
++  {
++    SizeT limit2 = limit;
++    if (p->checkDicSize == 0)
++    {
++      UInt32 rem = p->prop.dicSize - p->processedPos;
++      if (limit - p->dicPos > rem)
++        limit2 = p->dicPos + rem;
++    }
++    RINOK(LzmaDec_DecodeReal(p, limit2, bufLimit));
++    if (p->processedPos >= p->prop.dicSize)
++      p->checkDicSize = p->prop.dicSize;
++    LzmaDec_WriteRem(p, limit);
++  }
++  while (p->dicPos < limit && p->buf < bufLimit && p->remainLen < kMatchSpecLenStart);
++
++  if (p->remainLen > kMatchSpecLenStart)
++  {
++    p->remainLen = kMatchSpecLenStart;
++  }
++  return 0;
++}
++
++typedef enum
++{
++  DUMMY_ERROR, /* unexpected end of input stream */
++  DUMMY_LIT,
++  DUMMY_MATCH,
++  DUMMY_REP
++} ELzmaDummy;
++
++static ELzmaDummy LzmaDec_TryDummy(const CLzmaDec *p, const Byte *buf, SizeT inSize)
++{
++  UInt32 range = p->range;
++  UInt32 code = p->code;
++  const Byte *bufLimit = buf + inSize;
++  CLzmaProb *probs = p->probs;
++  unsigned state = p->state;
++  ELzmaDummy res;
++
++  {
++    CLzmaProb *prob;
++    UInt32 bound;
++    unsigned ttt;
++    unsigned posState = (p->processedPos) & ((1 << p->prop.pb) - 1);
++
++    prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
++    IF_BIT_0_CHECK(prob)
++    {
++      UPDATE_0_CHECK
++
++      /* if (bufLimit - buf >= 7) return DUMMY_LIT; */
++
++      prob = probs + Literal;
++      if (p->checkDicSize != 0 || p->processedPos != 0)
++        prob += (LZMA_LIT_SIZE *
++          ((((p->processedPos) & ((1 << (p->prop.lp)) - 1)) << p->prop.lc) +
++          (p->dic[(p->dicPos == 0 ? p->dicBufSize : p->dicPos) - 1] >> (8 - p->prop.lc))));
++
++      if (state < kNumLitStates)
++      {
++        unsigned symbol = 1;
++        do { GET_BIT_CHECK(prob + symbol, symbol) } while (symbol < 0x100);
++      }
++      else
++      {
++        unsigned matchByte = p->dic[p->dicPos - p->reps[0] +
++            ((p->dicPos < p->reps[0]) ? p->dicBufSize : 0)];
++        unsigned offs = 0x100;
++        unsigned symbol = 1;
++        do
++        {
++          unsigned bit;
++          CLzmaProb *probLit;
++          matchByte <<= 1;
++          bit = (matchByte & offs);
++          probLit = prob + offs + bit + symbol;
++          GET_BIT2_CHECK(probLit, symbol, offs &= ~bit, offs &= bit)
++        }
++        while (symbol < 0x100);
++      }
++      res = DUMMY_LIT;
++    }
++    else
++    {
++      unsigned len;
++      UPDATE_1_CHECK;
++
++      prob = probs + IsRep + state;
++      IF_BIT_0_CHECK(prob)
++      {
++        UPDATE_0_CHECK;
++        state = 0;
++        prob = probs + LenCoder;
++        res = DUMMY_MATCH;
++      }
++      else
++      {
++        UPDATE_1_CHECK;
++        res = DUMMY_REP;
++        prob = probs + IsRepG0 + state;
++        IF_BIT_0_CHECK(prob)
++        {
++          UPDATE_0_CHECK;
++          prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
++          IF_BIT_0_CHECK(prob)
++          {
++            UPDATE_0_CHECK;
++            NORMALIZE_CHECK;
++            return DUMMY_REP;
++          }
++          else
++          {
++            UPDATE_1_CHECK;
++          }
++        }
++        else
++        {
++          UPDATE_1_CHECK;
++          prob = probs + IsRepG1 + state;
++          IF_BIT_0_CHECK(prob)
++          {
++            UPDATE_0_CHECK;
++          }
++          else
++          {
++            UPDATE_1_CHECK;
++            prob = probs + IsRepG2 + state;
++            IF_BIT_0_CHECK(prob)
++            {
++              UPDATE_0_CHECK;
++            }
++            else
++            {
++              UPDATE_1_CHECK;
++            }
++          }
++        }
++        state = kNumStates;
++        prob = probs + RepLenCoder;
++      }
++      {
++        unsigned limit, offset;
++        CLzmaProb *probLen = prob + LenChoice;
++        IF_BIT_0_CHECK(probLen)
++        {
++          UPDATE_0_CHECK;
++          probLen = prob + LenLow + (posState << kLenNumLowBits);
++          offset = 0;
++          limit = 1 << kLenNumLowBits;
++        }
++        else
++        {
++          UPDATE_1_CHECK;
++          probLen = prob + LenChoice2;
++          IF_BIT_0_CHECK(probLen)
++          {
++            UPDATE_0_CHECK;
++            probLen = prob + LenMid + (posState << kLenNumMidBits);
++            offset = kLenNumLowSymbols;
++            limit = 1 << kLenNumMidBits;
++          }
++          else
++          {
++            UPDATE_1_CHECK;
++            probLen = prob + LenHigh;
++            offset = kLenNumLowSymbols + kLenNumMidSymbols;
++            limit = 1 << kLenNumHighBits;
++          }
++        }
++        TREE_DECODE_CHECK(probLen, limit, len);
++        len += offset;
++      }
++
++      if (state < 4)
++      {
++        unsigned posSlot;
++        prob = probs + PosSlot +
++            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
++            kNumPosSlotBits);
++        TREE_DECODE_CHECK(prob, 1 << kNumPosSlotBits, posSlot);
++        if (posSlot >= kStartPosModelIndex)
++        {
++          int numDirectBits = ((posSlot >> 1) - 1);
++
++          /* if (bufLimit - buf >= 8) return DUMMY_MATCH; */
++
++          if (posSlot < kEndPosModelIndex)
++          {
++            prob = probs + SpecPos + ((2 | (posSlot & 1)) << numDirectBits) - posSlot - 1;
++          }
++          else
++          {
++            numDirectBits -= kNumAlignBits;
++            do
++            {
++              NORMALIZE_CHECK
++              range >>= 1;
++              code -= range & (((code - range) >> 31) - 1);
++              /* if (code >= range) code -= range; */
++            }
++            while (--numDirectBits != 0);
++            prob = probs + Align;
++            numDirectBits = kNumAlignBits;
++          }
++          {
++            unsigned i = 1;
++            do
++            {
++              GET_BIT_CHECK(prob + i, i);
++            }
++            while (--numDirectBits != 0);
++          }
++        }
++      }
++    }
++  }
++  NORMALIZE_CHECK;
++  return res;
++}
++
++
++static void LzmaDec_InitRc(CLzmaDec *p, const Byte *data)
++{
++  p->code = ((UInt32)data[1] << 24) | ((UInt32)data[2] << 16) | ((UInt32)data[3] << 8) | ((UInt32)data[4]);
++  p->range = 0xFFFFFFFF;
++  p->needFlush = 0;
++}
++
++void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
++{
++  p->needFlush = 1;
++  p->remainLen = 0;
++  p->tempBufSize = 0;
++
++  if (initDic)
++  {
++    p->processedPos = 0;
++    p->checkDicSize = 0;
++    p->needInitState = 1;
++  }
++  if (initState)
++    p->needInitState = 1;
++}
++
++void LzmaDec_Init(CLzmaDec *p)
++{
++  p->dicPos = 0;
++  LzmaDec_InitDicAndState(p, True, True);
++}
++
++static void LzmaDec_InitStateReal(CLzmaDec *p)
++{
++  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (p->prop.lc + p->prop.lp));
++  UInt32 i;
++  CLzmaProb *probs = p->probs;
++  for (i = 0; i < numProbs; i++)
++    probs[i] = kBitModelTotal >> 1;
++  p->reps[0] = p->reps[1] = p->reps[2] = p->reps[3] = 1;
++  p->state = 0;
++  p->needInitState = 0;
++}
++
++SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
++    ELzmaFinishMode finishMode, ELzmaStatus *status)
++{
++  SizeT inSize = *srcLen;
++  (*srcLen) = 0;
++  LzmaDec_WriteRem(p, dicLimit);
++  
++  *status = LZMA_STATUS_NOT_SPECIFIED;
++
++  while (p->remainLen != kMatchSpecLenStart)
++  {
++      int checkEndMarkNow;
++
++      if (p->needFlush != 0)
++      {
++        for (; inSize > 0 && p->tempBufSize < RC_INIT_SIZE; (*srcLen)++, inSize--)
++          p->tempBuf[p->tempBufSize++] = *src++;
++        if (p->tempBufSize < RC_INIT_SIZE)
++        {
++          *status = LZMA_STATUS_NEEDS_MORE_INPUT;
++          return SZ_OK;
++        }
++        if (p->tempBuf[0] != 0)
++          return SZ_ERROR_DATA;
++
++        LzmaDec_InitRc(p, p->tempBuf);
++        p->tempBufSize = 0;
++      }
++
++      checkEndMarkNow = 0;
++      if (p->dicPos >= dicLimit)
++      {
++        if (p->remainLen == 0 && p->code == 0)
++        {
++          *status = LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK;
++          return SZ_OK;
++        }
++        if (finishMode == LZMA_FINISH_ANY)
++        {
++          *status = LZMA_STATUS_NOT_FINISHED;
++          return SZ_OK;
++        }
++        if (p->remainLen != 0)
++        {
++          *status = LZMA_STATUS_NOT_FINISHED;
++          return SZ_ERROR_DATA;
++        }
++        checkEndMarkNow = 1;
++      }
++
++      if (p->needInitState)
++        LzmaDec_InitStateReal(p);
++  
++      if (p->tempBufSize == 0)
++      {
++        SizeT processed;
++        const Byte *bufLimit;
++        if (inSize < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
++        {
++          int dummyRes = LzmaDec_TryDummy(p, src, inSize);
++          if (dummyRes == DUMMY_ERROR)
++          {
++            memcpy(p->tempBuf, src, inSize);
++            p->tempBufSize = (unsigned)inSize;
++            (*srcLen) += inSize;
++            *status = LZMA_STATUS_NEEDS_MORE_INPUT;
++            return SZ_OK;
++          }
++          if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
++          {
++            *status = LZMA_STATUS_NOT_FINISHED;
++            return SZ_ERROR_DATA;
++          }
++          bufLimit = src;
++        }
++        else
++          bufLimit = src + inSize - LZMA_REQUIRED_INPUT_MAX;
++        p->buf = src;
++        if (LzmaDec_DecodeReal2(p, dicLimit, bufLimit) != 0)
++          return SZ_ERROR_DATA;
++        processed = (SizeT)(p->buf - src);
++        (*srcLen) += processed;
++        src += processed;
++        inSize -= processed;
++      }
++      else
++      {
++        unsigned rem = p->tempBufSize, lookAhead = 0;
++        while (rem < LZMA_REQUIRED_INPUT_MAX && lookAhead < inSize)
++          p->tempBuf[rem++] = src[lookAhead++];
++        p->tempBufSize = rem;
++        if (rem < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
++        {
++          int dummyRes = LzmaDec_TryDummy(p, p->tempBuf, rem);
++          if (dummyRes == DUMMY_ERROR)
++          {
++            (*srcLen) += lookAhead;
++            *status = LZMA_STATUS_NEEDS_MORE_INPUT;
++            return SZ_OK;
++          }
++          if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
++          {
++            *status = LZMA_STATUS_NOT_FINISHED;
++            return SZ_ERROR_DATA;
++          }
++        }
++        p->buf = p->tempBuf;
++        if (LzmaDec_DecodeReal2(p, dicLimit, p->buf) != 0)
++          return SZ_ERROR_DATA;
++        lookAhead -= (rem - (unsigned)(p->buf - p->tempBuf));
++        (*srcLen) += lookAhead;
++        src += lookAhead;
++        inSize -= lookAhead;
++        p->tempBufSize = 0;
++      }
++  }
++  if (p->code == 0)
++    *status = LZMA_STATUS_FINISHED_WITH_MARK;
++  return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA;
++}
++
++SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status)
++{
++  SizeT outSize = *destLen;
++  SizeT inSize = *srcLen;
++  *srcLen = *destLen = 0;
++  for (;;)
++  {
++    SizeT inSizeCur = inSize, outSizeCur, dicPos;
++    ELzmaFinishMode curFinishMode;
++    SRes res;
++    if (p->dicPos == p->dicBufSize)
++      p->dicPos = 0;
++    dicPos = p->dicPos;
++    if (outSize > p->dicBufSize - dicPos)
++    {
++      outSizeCur = p->dicBufSize;
++      curFinishMode = LZMA_FINISH_ANY;
++    }
++    else
++    {
++      outSizeCur = dicPos + outSize;
++      curFinishMode = finishMode;
++    }
++
++    res = LzmaDec_DecodeToDic(p, outSizeCur, src, &inSizeCur, curFinishMode, status);
++    src += inSizeCur;
++    inSize -= inSizeCur;
++    *srcLen += inSizeCur;
++    outSizeCur = p->dicPos - dicPos;
++    memcpy(dest, p->dic + dicPos, outSizeCur);
++    dest += outSizeCur;
++    outSize -= outSizeCur;
++    *destLen += outSizeCur;
++    if (res != 0)
++      return res;
++    if (outSizeCur == 0 || outSize == 0)
++      return SZ_OK;
++  }
++}
++
++void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
++{
++  alloc->Free(alloc, p->probs);
++  p->probs = 0;
++}
++
++static void LzmaDec_FreeDict(CLzmaDec *p, ISzAlloc *alloc)
++{
++  alloc->Free(alloc, p->dic);
++  p->dic = 0;
++}
++
++void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc)
++{
++  LzmaDec_FreeProbs(p, alloc);
++  LzmaDec_FreeDict(p, alloc);
++}
++
++SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
++{
++  UInt32 dicSize;
++  Byte d;
++  
++  if (size < LZMA_PROPS_SIZE)
++    return SZ_ERROR_UNSUPPORTED;
++  else
++    dicSize = data[1] | ((UInt32)data[2] << 8) | ((UInt32)data[3] << 16) | ((UInt32)data[4] << 24);
++ 
++  if (dicSize < LZMA_DIC_MIN)
++    dicSize = LZMA_DIC_MIN;
++  p->dicSize = dicSize;
++
++  d = data[0];
++  if (d >= (9 * 5 * 5))
++    return SZ_ERROR_UNSUPPORTED;
++
++  p->lc = d % 9;
++  d /= 9;
++  p->pb = d / 5;
++  p->lp = d % 5;
++
++  return SZ_OK;
++}
++
++static SRes LzmaDec_AllocateProbs2(CLzmaDec *p, const CLzmaProps *propNew, ISzAlloc *alloc)
++{
++  UInt32 numProbs = LzmaProps_GetNumProbs(propNew);
++  if (p->probs == 0 || numProbs != p->numProbs)
++  {
++    LzmaDec_FreeProbs(p, alloc);
++    p->probs = (CLzmaProb *)alloc->Alloc(alloc, numProbs * sizeof(CLzmaProb));
++    p->numProbs = numProbs;
++    if (p->probs == 0)
++      return SZ_ERROR_MEM;
++  }
++  return SZ_OK;
++}
++
++SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
++{
++  CLzmaProps propNew;
++  RINOK(LzmaProps_Decode(&propNew, props, propsSize));
++  RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
++  p->prop = propNew;
++  return SZ_OK;
++}
++
++SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
++{
++  CLzmaProps propNew;
++  SizeT dicBufSize;
++  RINOK(LzmaProps_Decode(&propNew, props, propsSize));
++  RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
++  dicBufSize = propNew.dicSize;
++  if (p->dic == 0 || dicBufSize != p->dicBufSize)
++  {
++    LzmaDec_FreeDict(p, alloc);
++    p->dic = (Byte *)alloc->Alloc(alloc, dicBufSize);
++    if (p->dic == 0)
++    {
++      LzmaDec_FreeProbs(p, alloc);
++      return SZ_ERROR_MEM;
++    }
++  }
++  p->dicBufSize = dicBufSize;
++  p->prop = propNew;
++  return SZ_OK;
++}
++
++SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
++    const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
++    ELzmaStatus *status, ISzAlloc *alloc)
++{
++  CLzmaDec p;
++  SRes res;
++  SizeT inSize = *srcLen;
++  SizeT outSize = *destLen;
++  *srcLen = *destLen = 0;
++  if (inSize < RC_INIT_SIZE)
++    return SZ_ERROR_INPUT_EOF;
++
++  LzmaDec_Construct(&p);
++  res = LzmaDec_AllocateProbs(&p, propData, propSize, alloc);
++  if (res != 0)
++    return res;
++  p.dic = dest;
++  p.dicBufSize = outSize;
++
++  LzmaDec_Init(&p);
++  
++  *srcLen = inSize;
++  res = LzmaDec_DecodeToDic(&p, outSize, src, srcLen, finishMode, status);
++
++  if (res == SZ_OK && *status == LZMA_STATUS_NEEDS_MORE_INPUT)
++    res = SZ_ERROR_INPUT_EOF;
++
++  (*destLen) = p.dicPos;
++  LzmaDec_FreeProbs(&p, alloc);
++  return res;
++}
+--- /dev/null
++++ b/lib/lzma/LzmaEnc.c
+@@ -0,0 +1,2271 @@
++/* LzmaEnc.c -- LZMA Encoder
++2009-11-24 : Igor Pavlov : Public domain */
++
++#include <string.h>
++
++/* #define SHOW_STAT */
++/* #define SHOW_STAT2 */
++
++#if defined(SHOW_STAT) || defined(SHOW_STAT2)
++#include <stdio.h>
++#endif
++
++#include "LzmaEnc.h"
++
++/* disable MT */
++#define _7ZIP_ST
++
++#include "LzFind.h"
++#ifndef _7ZIP_ST
++#include "LzFindMt.h"
++#endif
++
++#ifdef SHOW_STAT
++static int ttt = 0;
++#endif
++
++#define kBlockSizeMax ((1 << LZMA_NUM_BLOCK_SIZE_BITS) - 1)
++
++#define kBlockSize (9 << 10)
++#define kUnpackBlockSize (1 << 18)
++#define kMatchArraySize (1 << 21)
++#define kMatchRecordMaxSize ((LZMA_MATCH_LEN_MAX * 2 + 3) * LZMA_MATCH_LEN_MAX)
++
++#define kNumMaxDirectBits (31)
++
++#define kNumTopBits 24
++#define kTopValue ((UInt32)1 << kNumTopBits)
++
++#define kNumBitModelTotalBits 11
++#define kBitModelTotal (1 << kNumBitModelTotalBits)
++#define kNumMoveBits 5
++#define kProbInitValue (kBitModelTotal >> 1)
++
++#define kNumMoveReducingBits 4
++#define kNumBitPriceShiftBits 4
++#define kBitPrice (1 << kNumBitPriceShiftBits)
++
++void LzmaEncProps_Init(CLzmaEncProps *p)
++{
++  p->level = 5;
++  p->dictSize = p->mc = 0;
++  p->lc = p->lp = p->pb = p->algo = p->fb = p->btMode = p->numHashBytes = p->numThreads = -1;
++  p->writeEndMark = 0;
++}
++
++void LzmaEncProps_Normalize(CLzmaEncProps *p)
++{
++  int level = p->level;
++  if (level < 0) level = 5;
++  p->level = level;
++  if (p->dictSize == 0) p->dictSize = (level <= 5 ? (1 << (level * 2 + 14)) : (level == 6 ? (1 << 25) : (1 << 26)));
++  if (p->lc < 0) p->lc = 3;
++  if (p->lp < 0) p->lp = 0;
++  if (p->pb < 0) p->pb = 2;
++  if (p->algo < 0) p->algo = (level < 5 ? 0 : 1);
++  if (p->fb < 0) p->fb = (level < 7 ? 32 : 64);
++  if (p->btMode < 0) p->btMode = (p->algo == 0 ? 0 : 1);
++  if (p->numHashBytes < 0) p->numHashBytes = 4;
++  if (p->mc == 0)  p->mc = (16 + (p->fb >> 1)) >> (p->btMode ? 0 : 1);
++  if (p->numThreads < 0)
++    p->numThreads =
++      #ifndef _7ZIP_ST
++      ((p->btMode && p->algo) ? 2 : 1);
++      #else
++      1;
++      #endif
++}
++
++UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
++{
++  CLzmaEncProps props = *props2;
++  LzmaEncProps_Normalize(&props);
++  return props.dictSize;
++}
++
++/* #define LZMA_LOG_BSR */
++/* Define it for Intel's CPU */
++
++
++#ifdef LZMA_LOG_BSR
++
++#define kDicLogSizeMaxCompress 30
++
++#define BSR2_RET(pos, res) { unsigned long i; _BitScanReverse(&i, (pos)); res = (i + i) + ((pos >> (i - 1)) & 1); }
++
++UInt32 GetPosSlot1(UInt32 pos)
++{
++  UInt32 res;
++  BSR2_RET(pos, res);
++  return res;
++}
++#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); }
++#define GetPosSlot(pos, res) { if (pos < 2) res = pos; else BSR2_RET(pos, res); }
++
++#else
++
++#define kNumLogBits (9 + (int)sizeof(size_t) / 2)
++#define kDicLogSizeMaxCompress ((kNumLogBits - 1) * 2 + 7)
++
++void LzmaEnc_FastPosInit(Byte *g_FastPos)
++{
++  int c = 2, slotFast;
++  g_FastPos[0] = 0;
++  g_FastPos[1] = 1;
++  
++  for (slotFast = 2; slotFast < kNumLogBits * 2; slotFast++)
++  {
++    UInt32 k = (1 << ((slotFast >> 1) - 1));
++    UInt32 j;
++    for (j = 0; j < k; j++, c++)
++      g_FastPos[c] = (Byte)slotFast;
++  }
++}
++
++#define BSR2_RET(pos, res) { UInt32 i = 6 + ((kNumLogBits - 1) & \
++  (0 - (((((UInt32)1 << (kNumLogBits + 6)) - 1) - pos) >> 31))); \
++  res = p->g_FastPos[pos >> i] + (i * 2); }
++/*
++#define BSR2_RET(pos, res) { res = (pos < (1 << (kNumLogBits + 6))) ? \
++  p->g_FastPos[pos >> 6] + 12 : \
++  p->g_FastPos[pos >> (6 + kNumLogBits - 1)] + (6 + (kNumLogBits - 1)) * 2; }
++*/
++
++#define GetPosSlot1(pos) p->g_FastPos[pos]
++#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); }
++#define GetPosSlot(pos, res) { if (pos < kNumFullDistances) res = p->g_FastPos[pos]; else BSR2_RET(pos, res); }
++
++#endif
++
++
++#define LZMA_NUM_REPS 4
++
++typedef unsigned CState;
++
++typedef struct
++{
++  UInt32 price;
++
++  CState state;
++  int prev1IsChar;
++  int prev2;
++
++  UInt32 posPrev2;
++  UInt32 backPrev2;
++
++  UInt32 posPrev;
++  UInt32 backPrev;
++  UInt32 backs[LZMA_NUM_REPS];
++} COptimal;
++
++#define kNumOpts (1 << 12)
++
++#define kNumLenToPosStates 4
++#define kNumPosSlotBits 6
++#define kDicLogSizeMin 0
++#define kDicLogSizeMax 32
++#define kDistTableSizeMax (kDicLogSizeMax * 2)
++
++
++#define kNumAlignBits 4
++#define kAlignTableSize (1 << kNumAlignBits)
++#define kAlignMask (kAlignTableSize - 1)
++
++#define kStartPosModelIndex 4
++#define kEndPosModelIndex 14
++#define kNumPosModels (kEndPosModelIndex - kStartPosModelIndex)
++
++#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
++
++#ifdef _LZMA_PROB32
++#define CLzmaProb UInt32
++#else
++#define CLzmaProb UInt16
++#endif
++
++#define LZMA_PB_MAX 4
++#define LZMA_LC_MAX 8
++#define LZMA_LP_MAX 4
++
++#define LZMA_NUM_PB_STATES_MAX (1 << LZMA_PB_MAX)
++
++
++#define kLenNumLowBits 3
++#define kLenNumLowSymbols (1 << kLenNumLowBits)
++#define kLenNumMidBits 3
++#define kLenNumMidSymbols (1 << kLenNumMidBits)
++#define kLenNumHighBits 8
++#define kLenNumHighSymbols (1 << kLenNumHighBits)
++
++#define kLenNumSymbolsTotal (kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols)
++
++#define LZMA_MATCH_LEN_MIN 2
++#define LZMA_MATCH_LEN_MAX (LZMA_MATCH_LEN_MIN + kLenNumSymbolsTotal - 1)
++
++#define kNumStates 12
++
++typedef struct
++{
++  CLzmaProb choice;
++  CLzmaProb choice2;
++  CLzmaProb low[LZMA_NUM_PB_STATES_MAX << kLenNumLowBits];
++  CLzmaProb mid[LZMA_NUM_PB_STATES_MAX << kLenNumMidBits];
++  CLzmaProb high[kLenNumHighSymbols];
++} CLenEnc;
++
++typedef struct
++{
++  CLenEnc p;
++  UInt32 prices[LZMA_NUM_PB_STATES_MAX][kLenNumSymbolsTotal];
++  UInt32 tableSize;
++  UInt32 counters[LZMA_NUM_PB_STATES_MAX];
++} CLenPriceEnc;
++
++typedef struct
++{
++  UInt32 range;
++  Byte cache;
++  UInt64 low;
++  UInt64 cacheSize;
++  Byte *buf;
++  Byte *bufLim;
++  Byte *bufBase;
++  ISeqOutStream *outStream;
++  UInt64 processed;
++  SRes res;
++} CRangeEnc;
++
++typedef struct
++{
++  CLzmaProb *litProbs;
++
++  CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX];
++  CLzmaProb isRep[kNumStates];
++  CLzmaProb isRepG0[kNumStates];
++  CLzmaProb isRepG1[kNumStates];
++  CLzmaProb isRepG2[kNumStates];
++  CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX];
++
++  CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits];
++  CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex];
++  CLzmaProb posAlignEncoder[1 << kNumAlignBits];
++  
++  CLenPriceEnc lenEnc;
++  CLenPriceEnc repLenEnc;
++
++  UInt32 reps[LZMA_NUM_REPS];
++  UInt32 state;
++} CSaveState;
++
++typedef struct
++{
++  IMatchFinder matchFinder;
++  void *matchFinderObj;
++
++  #ifndef _7ZIP_ST
++  Bool mtMode;
++  CMatchFinderMt matchFinderMt;
++  #endif
++
++  CMatchFinder matchFinderBase;
++
++  #ifndef _7ZIP_ST
++  Byte pad[128];
++  #endif
++  
++  UInt32 optimumEndIndex;
++  UInt32 optimumCurrentIndex;
++
++  UInt32 longestMatchLength;
++  UInt32 numPairs;
++  UInt32 numAvail;
++  COptimal opt[kNumOpts];
++  
++  #ifndef LZMA_LOG_BSR
++  Byte g_FastPos[1 << kNumLogBits];
++  #endif
++
++  UInt32 ProbPrices[kBitModelTotal >> kNumMoveReducingBits];
++  UInt32 matches[LZMA_MATCH_LEN_MAX * 2 + 2 + 1];
++  UInt32 numFastBytes;
++  UInt32 additionalOffset;
++  UInt32 reps[LZMA_NUM_REPS];
++  UInt32 state;
++
++  UInt32 posSlotPrices[kNumLenToPosStates][kDistTableSizeMax];
++  UInt32 distancesPrices[kNumLenToPosStates][kNumFullDistances];
++  UInt32 alignPrices[kAlignTableSize];
++  UInt32 alignPriceCount;
++
++  UInt32 distTableSize;
++
++  unsigned lc, lp, pb;
++  unsigned lpMask, pbMask;
++
++  CLzmaProb *litProbs;
++
++  CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX];
++  CLzmaProb isRep[kNumStates];
++  CLzmaProb isRepG0[kNumStates];
++  CLzmaProb isRepG1[kNumStates];
++  CLzmaProb isRepG2[kNumStates];
++  CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX];
++
++  CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits];
++  CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex];
++  CLzmaProb posAlignEncoder[1 << kNumAlignBits];
++  
++  CLenPriceEnc lenEnc;
++  CLenPriceEnc repLenEnc;
++
++  unsigned lclp;
++
++  Bool fastMode;
++  
++  CRangeEnc rc;
++
++  Bool writeEndMark;
++  UInt64 nowPos64;
++  UInt32 matchPriceCount;
++  Bool finished;
++  Bool multiThread;
++
++  SRes result;
++  UInt32 dictSize;
++  UInt32 matchFinderCycles;
++
++  int needInit;
++
++  CSaveState saveState;
++} CLzmaEnc;
++
++void LzmaEnc_SaveState(CLzmaEncHandle pp)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  CSaveState *dest = &p->saveState;
++  int i;
++  dest->lenEnc = p->lenEnc;
++  dest->repLenEnc = p->repLenEnc;
++  dest->state = p->state;
++
++  for (i = 0; i < kNumStates; i++)
++  {
++    memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
++    memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
++  }
++  for (i = 0; i < kNumLenToPosStates; i++)
++    memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
++  memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
++  memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
++  memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
++  memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
++  memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
++  memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
++  memcpy(dest->reps, p->reps, sizeof(p->reps));
++  memcpy(dest->litProbs, p->litProbs, (0x300 << p->lclp) * sizeof(CLzmaProb));
++}
++
++void LzmaEnc_RestoreState(CLzmaEncHandle pp)
++{
++  CLzmaEnc *dest = (CLzmaEnc *)pp;
++  const CSaveState *p = &dest->saveState;
++  int i;
++  dest->lenEnc = p->lenEnc;
++  dest->repLenEnc = p->repLenEnc;
++  dest->state = p->state;
++
++  for (i = 0; i < kNumStates; i++)
++  {
++    memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
++    memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
++  }
++  for (i = 0; i < kNumLenToPosStates; i++)
++    memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
++  memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
++  memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
++  memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
++  memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
++  memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
++  memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
++  memcpy(dest->reps, p->reps, sizeof(p->reps));
++  memcpy(dest->litProbs, p->litProbs, (0x300 << dest->lclp) * sizeof(CLzmaProb));
++}
++
++SRes LzmaEnc_SetProps(CLzmaEncHandle pp, const CLzmaEncProps *props2)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  CLzmaEncProps props = *props2;
++  LzmaEncProps_Normalize(&props);
++
++  if (props.lc > LZMA_LC_MAX || props.lp > LZMA_LP_MAX || props.pb > LZMA_PB_MAX ||
++      props.dictSize > (1 << kDicLogSizeMaxCompress) || props.dictSize > (1 << 30))
++    return SZ_ERROR_PARAM;
++  p->dictSize = props.dictSize;
++  p->matchFinderCycles = props.mc;
++  {
++    unsigned fb = props.fb;
++    if (fb < 5)
++      fb = 5;
++    if (fb > LZMA_MATCH_LEN_MAX)
++      fb = LZMA_MATCH_LEN_MAX;
++    p->numFastBytes = fb;
++  }
++  p->lc = props.lc;
++  p->lp = props.lp;
++  p->pb = props.pb;
++  p->fastMode = (props.algo == 0);
++  p->matchFinderBase.btMode = props.btMode;
++  {
++    UInt32 numHashBytes = 4;
++    if (props.btMode)
++    {
++      if (props.numHashBytes < 2)
++        numHashBytes = 2;
++      else if (props.numHashBytes < 4)
++        numHashBytes = props.numHashBytes;
++    }
++    p->matchFinderBase.numHashBytes = numHashBytes;
++  }
++
++  p->matchFinderBase.cutValue = props.mc;
++
++  p->writeEndMark = props.writeEndMark;
++
++  #ifndef _7ZIP_ST
++  /*
++  if (newMultiThread != _multiThread)
++  {
++    ReleaseMatchFinder();
++    _multiThread = newMultiThread;
++  }
++  */
++  p->multiThread = (props.numThreads > 1);
++  #endif
++
++  return SZ_OK;
++}
++
++static const int kLiteralNextStates[kNumStates] = {0, 0, 0, 0, 1, 2, 3, 4,  5,  6,   4, 5};
++static const int kMatchNextStates[kNumStates]   = {7, 7, 7, 7, 7, 7, 7, 10, 10, 10, 10, 10};
++static const int kRepNextStates[kNumStates]     = {8, 8, 8, 8, 8, 8, 8, 11, 11, 11, 11, 11};
++static const int kShortRepNextStates[kNumStates]= {9, 9, 9, 9, 9, 9, 9, 11, 11, 11, 11, 11};
++
++#define IsCharState(s) ((s) < 7)
++
++#define GetLenToPosState(len) (((len) < kNumLenToPosStates + 1) ? (len) - 2 : kNumLenToPosStates - 1)
++
++#define kInfinityPrice (1 << 30)
++
++static void RangeEnc_Construct(CRangeEnc *p)
++{
++  p->outStream = 0;
++  p->bufBase = 0;
++}
++
++#define RangeEnc_GetProcessed(p) ((p)->processed + ((p)->buf - (p)->bufBase) + (p)->cacheSize)
++
++#define RC_BUF_SIZE (1 << 16)
++static int RangeEnc_Alloc(CRangeEnc *p, ISzAlloc *alloc)
++{
++  if (p->bufBase == 0)
++  {
++    p->bufBase = (Byte *)alloc->Alloc(alloc, RC_BUF_SIZE);
++    if (p->bufBase == 0)
++      return 0;
++    p->bufLim = p->bufBase + RC_BUF_SIZE;
++  }
++  return 1;
++}
++
++static void RangeEnc_Free(CRangeEnc *p, ISzAlloc *alloc)
++{
++  alloc->Free(alloc, p->bufBase);
++  p->bufBase = 0;
++}
++
++static void RangeEnc_Init(CRangeEnc *p)
++{
++  /* Stream.Init(); */
++  p->low = 0;
++  p->range = 0xFFFFFFFF;
++  p->cacheSize = 1;
++  p->cache = 0;
++
++  p->buf = p->bufBase;
++
++  p->processed = 0;
++  p->res = SZ_OK;
++}
++
++static void RangeEnc_FlushStream(CRangeEnc *p)
++{
++  size_t num;
++  if (p->res != SZ_OK)
++    return;
++  num = p->buf - p->bufBase;
++  if (num != p->outStream->Write(p->outStream, p->bufBase, num))
++    p->res = SZ_ERROR_WRITE;
++  p->processed += num;
++  p->buf = p->bufBase;
++}
++
++static void MY_FAST_CALL RangeEnc_ShiftLow(CRangeEnc *p)
++{
++  if ((UInt32)p->low < (UInt32)0xFF000000 || (int)(p->low >> 32) != 0)
++  {
++    Byte temp = p->cache;
++    do
++    {
++      Byte *buf = p->buf;
++      *buf++ = (Byte)(temp + (Byte)(p->low >> 32));
++      p->buf = buf;
++      if (buf == p->bufLim)
++        RangeEnc_FlushStream(p);
++      temp = 0xFF;
++    }
++    while (--p->cacheSize != 0);
++    p->cache = (Byte)((UInt32)p->low >> 24);
++  }
++  p->cacheSize++;
++  p->low = (UInt32)p->low << 8;
++}
++
++static void RangeEnc_FlushData(CRangeEnc *p)
++{
++  int i;
++  for (i = 0; i < 5; i++)
++    RangeEnc_ShiftLow(p);
++}
++
++static void RangeEnc_EncodeDirectBits(CRangeEnc *p, UInt32 value, int numBits)
++{
++  do
++  {
++    p->range >>= 1;
++    p->low += p->range & (0 - ((value >> --numBits) & 1));
++    if (p->range < kTopValue)
++    {
++      p->range <<= 8;
++      RangeEnc_ShiftLow(p);
++    }
++  }
++  while (numBits != 0);
++}
++
++static void RangeEnc_EncodeBit(CRangeEnc *p, CLzmaProb *prob, UInt32 symbol)
++{
++  UInt32 ttt = *prob;
++  UInt32 newBound = (p->range >> kNumBitModelTotalBits) * ttt;
++  if (symbol == 0)
++  {
++    p->range = newBound;
++    ttt += (kBitModelTotal - ttt) >> kNumMoveBits;
++  }
++  else
++  {
++    p->low += newBound;
++    p->range -= newBound;
++    ttt -= ttt >> kNumMoveBits;
++  }
++  *prob = (CLzmaProb)ttt;
++  if (p->range < kTopValue)
++  {
++    p->range <<= 8;
++    RangeEnc_ShiftLow(p);
++  }
++}
++
++static void LitEnc_Encode(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol)
++{
++  symbol |= 0x100;
++  do
++  {
++    RangeEnc_EncodeBit(p, probs + (symbol >> 8), (symbol >> 7) & 1);
++    symbol <<= 1;
++  }
++  while (symbol < 0x10000);
++}
++
++static void LitEnc_EncodeMatched(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol, UInt32 matchByte)
++{
++  UInt32 offs = 0x100;
++  symbol |= 0x100;
++  do
++  {
++    matchByte <<= 1;
++    RangeEnc_EncodeBit(p, probs + (offs + (matchByte & offs) + (symbol >> 8)), (symbol >> 7) & 1);
++    symbol <<= 1;
++    offs &= ~(matchByte ^ symbol);
++  }
++  while (symbol < 0x10000);
++}
++
++void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
++{
++  UInt32 i;
++  for (i = (1 << kNumMoveReducingBits) / 2; i < kBitModelTotal; i += (1 << kNumMoveReducingBits))
++  {
++    const int kCyclesBits = kNumBitPriceShiftBits;
++    UInt32 w = i;
++    UInt32 bitCount = 0;
++    int j;
++    for (j = 0; j < kCyclesBits; j++)
++    {
++      w = w * w;
++      bitCount <<= 1;
++      while (w >= ((UInt32)1 << 16))
++      {
++        w >>= 1;
++        bitCount++;
++      }
++    }
++    ProbPrices[i >> kNumMoveReducingBits] = ((kNumBitModelTotalBits << kCyclesBits) - 15 - bitCount);
++  }
++}
++
++
++#define GET_PRICE(prob, symbol) \
++  p->ProbPrices[((prob) ^ (((-(int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits];
++
++#define GET_PRICEa(prob, symbol) \
++  ProbPrices[((prob) ^ ((-((int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits];
++
++#define GET_PRICE_0(prob) p->ProbPrices[(prob) >> kNumMoveReducingBits]
++#define GET_PRICE_1(prob) p->ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits]
++
++#define GET_PRICE_0a(prob) ProbPrices[(prob) >> kNumMoveReducingBits]
++#define GET_PRICE_1a(prob) ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits]
++
++static UInt32 LitEnc_GetPrice(const CLzmaProb *probs, UInt32 symbol, UInt32 *ProbPrices)
++{
++  UInt32 price = 0;
++  symbol |= 0x100;
++  do
++  {
++    price += GET_PRICEa(probs[symbol >> 8], (symbol >> 7) & 1);
++    symbol <<= 1;
++  }
++  while (symbol < 0x10000);
++  return price;
++}
++
++static UInt32 LitEnc_GetPriceMatched(const CLzmaProb *probs, UInt32 symbol, UInt32 matchByte, UInt32 *ProbPrices)
++{
++  UInt32 price = 0;
++  UInt32 offs = 0x100;
++  symbol |= 0x100;
++  do
++  {
++    matchByte <<= 1;
++    price += GET_PRICEa(probs[offs + (matchByte & offs) + (symbol >> 8)], (symbol >> 7) & 1);
++    symbol <<= 1;
++    offs &= ~(matchByte ^ symbol);
++  }
++  while (symbol < 0x10000);
++  return price;
++}
++
++
++static void RcTree_Encode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol)
++{
++  UInt32 m = 1;
++  int i;
++  for (i = numBitLevels; i != 0;)
++  {
++    UInt32 bit;
++    i--;
++    bit = (symbol >> i) & 1;
++    RangeEnc_EncodeBit(rc, probs + m, bit);
++    m = (m << 1) | bit;
++  }
++}
++
++static void RcTree_ReverseEncode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol)
++{
++  UInt32 m = 1;
++  int i;
++  for (i = 0; i < numBitLevels; i++)
++  {
++    UInt32 bit = symbol & 1;
++    RangeEnc_EncodeBit(rc, probs + m, bit);
++    m = (m << 1) | bit;
++    symbol >>= 1;
++  }
++}
++
++static UInt32 RcTree_GetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices)
++{
++  UInt32 price = 0;
++  symbol |= (1 << numBitLevels);
++  while (symbol != 1)
++  {
++    price += GET_PRICEa(probs[symbol >> 1], symbol & 1);
++    symbol >>= 1;
++  }
++  return price;
++}
++
++static UInt32 RcTree_ReverseGetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices)
++{
++  UInt32 price = 0;
++  UInt32 m = 1;
++  int i;
++  for (i = numBitLevels; i != 0; i--)
++  {
++    UInt32 bit = symbol & 1;
++    symbol >>= 1;
++    price += GET_PRICEa(probs[m], bit);
++    m = (m << 1) | bit;
++  }
++  return price;
++}
++
++
++static void LenEnc_Init(CLenEnc *p)
++{
++  unsigned i;
++  p->choice = p->choice2 = kProbInitValue;
++  for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumLowBits); i++)
++    p->low[i] = kProbInitValue;
++  for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumMidBits); i++)
++    p->mid[i] = kProbInitValue;
++  for (i = 0; i < kLenNumHighSymbols; i++)
++    p->high[i] = kProbInitValue;
++}
++
++static void LenEnc_Encode(CLenEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState)
++{
++  if (symbol < kLenNumLowSymbols)
++  {
++    RangeEnc_EncodeBit(rc, &p->choice, 0);
++    RcTree_Encode(rc, p->low + (posState << kLenNumLowBits), kLenNumLowBits, symbol);
++  }
++  else
++  {
++    RangeEnc_EncodeBit(rc, &p->choice, 1);
++    if (symbol < kLenNumLowSymbols + kLenNumMidSymbols)
++    {
++      RangeEnc_EncodeBit(rc, &p->choice2, 0);
++      RcTree_Encode(rc, p->mid + (posState << kLenNumMidBits), kLenNumMidBits, symbol - kLenNumLowSymbols);
++    }
++    else
++    {
++      RangeEnc_EncodeBit(rc, &p->choice2, 1);
++      RcTree_Encode(rc, p->high, kLenNumHighBits, symbol - kLenNumLowSymbols - kLenNumMidSymbols);
++    }
++  }
++}
++
++static void LenEnc_SetPrices(CLenEnc *p, UInt32 posState, UInt32 numSymbols, UInt32 *prices, UInt32 *ProbPrices)
++{
++  UInt32 a0 = GET_PRICE_0a(p->choice);
++  UInt32 a1 = GET_PRICE_1a(p->choice);
++  UInt32 b0 = a1 + GET_PRICE_0a(p->choice2);
++  UInt32 b1 = a1 + GET_PRICE_1a(p->choice2);
++  UInt32 i = 0;
++  for (i = 0; i < kLenNumLowSymbols; i++)
++  {
++    if (i >= numSymbols)
++      return;
++    prices[i] = a0 + RcTree_GetPrice(p->low + (posState << kLenNumLowBits), kLenNumLowBits, i, ProbPrices);
++  }
++  for (; i < kLenNumLowSymbols + kLenNumMidSymbols; i++)
++  {
++    if (i >= numSymbols)
++      return;
++    prices[i] = b0 + RcTree_GetPrice(p->mid + (posState << kLenNumMidBits), kLenNumMidBits, i - kLenNumLowSymbols, ProbPrices);
++  }
++  for (; i < numSymbols; i++)
++    prices[i] = b1 + RcTree_GetPrice(p->high, kLenNumHighBits, i - kLenNumLowSymbols - kLenNumMidSymbols, ProbPrices);
++}
++
++static void MY_FAST_CALL LenPriceEnc_UpdateTable(CLenPriceEnc *p, UInt32 posState, UInt32 *ProbPrices)
++{
++  LenEnc_SetPrices(&p->p, posState, p->tableSize, p->prices[posState], ProbPrices);
++  p->counters[posState] = p->tableSize;
++}
++
++static void LenPriceEnc_UpdateTables(CLenPriceEnc *p, UInt32 numPosStates, UInt32 *ProbPrices)
++{
++  UInt32 posState;
++  for (posState = 0; posState < numPosStates; posState++)
++    LenPriceEnc_UpdateTable(p, posState, ProbPrices);
++}
++
++static void LenEnc_Encode2(CLenPriceEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState, Bool updatePrice, UInt32 *ProbPrices)
++{
++  LenEnc_Encode(&p->p, rc, symbol, posState);
++  if (updatePrice)
++    if (--p->counters[posState] == 0)
++      LenPriceEnc_UpdateTable(p, posState, ProbPrices);
++}
++
++
++
++
++static void MovePos(CLzmaEnc *p, UInt32 num)
++{
++  #ifdef SHOW_STAT
++  ttt += num;
++  printf("\n MovePos %d", num);
++  #endif
++  if (num != 0)
++  {
++    p->additionalOffset += num;
++    p->matchFinder.Skip(p->matchFinderObj, num);
++  }
++}
++
++static UInt32 ReadMatchDistances(CLzmaEnc *p, UInt32 *numDistancePairsRes)
++{
++  UInt32 lenRes = 0, numPairs;
++  p->numAvail = p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
++  numPairs = p->matchFinder.GetMatches(p->matchFinderObj, p->matches);
++  #ifdef SHOW_STAT
++  printf("\n i = %d numPairs = %d    ", ttt, numPairs / 2);
++  ttt++;
++  {
++    UInt32 i;
++    for (i = 0; i < numPairs; i += 2)
++      printf("%2d %6d   | ", p->matches[i], p->matches[i + 1]);
++  }
++  #endif
++  if (numPairs > 0)
++  {
++    lenRes = p->matches[numPairs - 2];
++    if (lenRes == p->numFastBytes)
++    {
++      const Byte *pby = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
++      UInt32 distance = p->matches[numPairs - 1] + 1;
++      UInt32 numAvail = p->numAvail;
++      if (numAvail > LZMA_MATCH_LEN_MAX)
++        numAvail = LZMA_MATCH_LEN_MAX;
++      {
++        const Byte *pby2 = pby - distance;
++        for (; lenRes < numAvail && pby[lenRes] == pby2[lenRes]; lenRes++);
++      }
++    }
++  }
++  p->additionalOffset++;
++  *numDistancePairsRes = numPairs;
++  return lenRes;
++}
++
++
++#define MakeAsChar(p) (p)->backPrev = (UInt32)(-1); (p)->prev1IsChar = False;
++#define MakeAsShortRep(p) (p)->backPrev = 0; (p)->prev1IsChar = False;
++#define IsShortRep(p) ((p)->backPrev == 0)
++
++static UInt32 GetRepLen1Price(CLzmaEnc *p, UInt32 state, UInt32 posState)
++{
++  return
++    GET_PRICE_0(p->isRepG0[state]) +
++    GET_PRICE_0(p->isRep0Long[state][posState]);
++}
++
++static UInt32 GetPureRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 state, UInt32 posState)
++{
++  UInt32 price;
++  if (repIndex == 0)
++  {
++    price = GET_PRICE_0(p->isRepG0[state]);
++    price += GET_PRICE_1(p->isRep0Long[state][posState]);
++  }
++  else
++  {
++    price = GET_PRICE_1(p->isRepG0[state]);
++    if (repIndex == 1)
++      price += GET_PRICE_0(p->isRepG1[state]);
++    else
++    {
++      price += GET_PRICE_1(p->isRepG1[state]);
++      price += GET_PRICE(p->isRepG2[state], repIndex - 2);
++    }
++  }
++  return price;
++}
++
++static UInt32 GetRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 len, UInt32 state, UInt32 posState)
++{
++  return p->repLenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN] +
++    GetPureRepPrice(p, repIndex, state, posState);
++}
++
++static UInt32 Backward(CLzmaEnc *p, UInt32 *backRes, UInt32 cur)
++{
++  UInt32 posMem = p->opt[cur].posPrev;
++  UInt32 backMem = p->opt[cur].backPrev;
++  p->optimumEndIndex = cur;
++  do
++  {
++    if (p->opt[cur].prev1IsChar)
++    {
++      MakeAsChar(&p->opt[posMem])
++      p->opt[posMem].posPrev = posMem - 1;
++      if (p->opt[cur].prev2)
++      {
++        p->opt[posMem - 1].prev1IsChar = False;
++        p->opt[posMem - 1].posPrev = p->opt[cur].posPrev2;
++        p->opt[posMem - 1].backPrev = p->opt[cur].backPrev2;
++      }
++    }
++    {
++      UInt32 posPrev = posMem;
++      UInt32 backCur = backMem;
++      
++      backMem = p->opt[posPrev].backPrev;
++      posMem = p->opt[posPrev].posPrev;
++      
++      p->opt[posPrev].backPrev = backCur;
++      p->opt[posPrev].posPrev = cur;
++      cur = posPrev;
++    }
++  }
++  while (cur != 0);
++  *backRes = p->opt[0].backPrev;
++  p->optimumCurrentIndex  = p->opt[0].posPrev;
++  return p->optimumCurrentIndex;
++}
++
++#define LIT_PROBS(pos, prevByte) (p->litProbs + ((((pos) & p->lpMask) << p->lc) + ((prevByte) >> (8 - p->lc))) * 0x300)
++
++static UInt32 GetOptimum(CLzmaEnc *p, UInt32 position, UInt32 *backRes)
++{
++  UInt32 numAvail, mainLen, numPairs, repMaxIndex, i, posState, lenEnd, len, cur;
++  UInt32 matchPrice, repMatchPrice, normalMatchPrice;
++  UInt32 reps[LZMA_NUM_REPS], repLens[LZMA_NUM_REPS];
++  UInt32 *matches;
++  const Byte *data;
++  Byte curByte, matchByte;
++  if (p->optimumEndIndex != p->optimumCurrentIndex)
++  {
++    const COptimal *opt = &p->opt[p->optimumCurrentIndex];
++    UInt32 lenRes = opt->posPrev - p->optimumCurrentIndex;
++    *backRes = opt->backPrev;
++    p->optimumCurrentIndex = opt->posPrev;
++    return lenRes;
++  }
++  p->optimumCurrentIndex = p->optimumEndIndex = 0;
++  
++  if (p->additionalOffset == 0)
++    mainLen = ReadMatchDistances(p, &numPairs);
++  else
++  {
++    mainLen = p->longestMatchLength;
++    numPairs = p->numPairs;
++  }
++
++  numAvail = p->numAvail;
++  if (numAvail < 2)
++  {
++    *backRes = (UInt32)(-1);
++    return 1;
++  }
++  if (numAvail > LZMA_MATCH_LEN_MAX)
++    numAvail = LZMA_MATCH_LEN_MAX;
++
++  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
++  repMaxIndex = 0;
++  for (i = 0; i < LZMA_NUM_REPS; i++)
++  {
++    UInt32 lenTest;
++    const Byte *data2;
++    reps[i] = p->reps[i];
++    data2 = data - (reps[i] + 1);
++    if (data[0] != data2[0] || data[1] != data2[1])
++    {
++      repLens[i] = 0;
++      continue;
++    }
++    for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++);
++    repLens[i] = lenTest;
++    if (lenTest > repLens[repMaxIndex])
++      repMaxIndex = i;
++  }
++  if (repLens[repMaxIndex] >= p->numFastBytes)
++  {
++    UInt32 lenRes;
++    *backRes = repMaxIndex;
++    lenRes = repLens[repMaxIndex];
++    MovePos(p, lenRes - 1);
++    return lenRes;
++  }
++
++  matches = p->matches;
++  if (mainLen >= p->numFastBytes)
++  {
++    *backRes = matches[numPairs - 1] + LZMA_NUM_REPS;
++    MovePos(p, mainLen - 1);
++    return mainLen;
++  }
++  curByte = *data;
++  matchByte = *(data - (reps[0] + 1));
++
++  if (mainLen < 2 && curByte != matchByte && repLens[repMaxIndex] < 2)
++  {
++    *backRes = (UInt32)-1;
++    return 1;
++  }
++
++  p->opt[0].state = (CState)p->state;
++
++  posState = (position & p->pbMask);
++
++  {
++    const CLzmaProb *probs = LIT_PROBS(position, *(data - 1));
++    p->opt[1].price = GET_PRICE_0(p->isMatch[p->state][posState]) +
++        (!IsCharState(p->state) ?
++          LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) :
++          LitEnc_GetPrice(probs, curByte, p->ProbPrices));
++  }
++
++  MakeAsChar(&p->opt[1]);
++
++  matchPrice = GET_PRICE_1(p->isMatch[p->state][posState]);
++  repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[p->state]);
++
++  if (matchByte == curByte)
++  {
++    UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, p->state, posState);
++    if (shortRepPrice < p->opt[1].price)
++    {
++      p->opt[1].price = shortRepPrice;
++      MakeAsShortRep(&p->opt[1]);
++    }
++  }
++  lenEnd = ((mainLen >= repLens[repMaxIndex]) ? mainLen : repLens[repMaxIndex]);
++
++  if (lenEnd < 2)
++  {
++    *backRes = p->opt[1].backPrev;
++    return 1;
++  }
++
++  p->opt[1].posPrev = 0;
++  for (i = 0; i < LZMA_NUM_REPS; i++)
++    p->opt[0].backs[i] = reps[i];
++
++  len = lenEnd;
++  do
++    p->opt[len--].price = kInfinityPrice;
++  while (len >= 2);
++
++  for (i = 0; i < LZMA_NUM_REPS; i++)
++  {
++    UInt32 repLen = repLens[i];
++    UInt32 price;
++    if (repLen < 2)
++      continue;
++    price = repMatchPrice + GetPureRepPrice(p, i, p->state, posState);
++    do
++    {
++      UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][repLen - 2];
++      COptimal *opt = &p->opt[repLen];
++      if (curAndLenPrice < opt->price)
++      {
++        opt->price = curAndLenPrice;
++        opt->posPrev = 0;
++        opt->backPrev = i;
++        opt->prev1IsChar = False;
++      }
++    }
++    while (--repLen >= 2);
++  }
++
++  normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[p->state]);
++
++  len = ((repLens[0] >= 2) ? repLens[0] + 1 : 2);
++  if (len <= mainLen)
++  {
++    UInt32 offs = 0;
++    while (len > matches[offs])
++      offs += 2;
++    for (; ; len++)
++    {
++      COptimal *opt;
++      UInt32 distance = matches[offs + 1];
++
++      UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN];
++      UInt32 lenToPosState = GetLenToPosState(len);
++      if (distance < kNumFullDistances)
++        curAndLenPrice += p->distancesPrices[lenToPosState][distance];
++      else
++      {
++        UInt32 slot;
++        GetPosSlot2(distance, slot);
++        curAndLenPrice += p->alignPrices[distance & kAlignMask] + p->posSlotPrices[lenToPosState][slot];
++      }
++      opt = &p->opt[len];
++      if (curAndLenPrice < opt->price)
++      {
++        opt->price = curAndLenPrice;
++        opt->posPrev = 0;
++        opt->backPrev = distance + LZMA_NUM_REPS;
++        opt->prev1IsChar = False;
++      }
++      if (len == matches[offs])
++      {
++        offs += 2;
++        if (offs == numPairs)
++          break;
++      }
++    }
++  }
++
++  cur = 0;
++
++    #ifdef SHOW_STAT2
++    if (position >= 0)
++    {
++      unsigned i;
++      printf("\n pos = %4X", position);
++      for (i = cur; i <= lenEnd; i++)
++      printf("\nprice[%4X] = %d", position - cur + i, p->opt[i].price);
++    }
++    #endif
++
++  for (;;)
++  {
++    UInt32 numAvailFull, newLen, numPairs, posPrev, state, posState, startLen;
++    UInt32 curPrice, curAnd1Price, matchPrice, repMatchPrice;
++    Bool nextIsChar;
++    Byte curByte, matchByte;
++    const Byte *data;
++    COptimal *curOpt;
++    COptimal *nextOpt;
++
++    cur++;
++    if (cur == lenEnd)
++      return Backward(p, backRes, cur);
++
++    newLen = ReadMatchDistances(p, &numPairs);
++    if (newLen >= p->numFastBytes)
++    {
++      p->numPairs = numPairs;
++      p->longestMatchLength = newLen;
++      return Backward(p, backRes, cur);
++    }
++    position++;
++    curOpt = &p->opt[cur];
++    posPrev = curOpt->posPrev;
++    if (curOpt->prev1IsChar)
++    {
++      posPrev--;
++      if (curOpt->prev2)
++      {
++        state = p->opt[curOpt->posPrev2].state;
++        if (curOpt->backPrev2 < LZMA_NUM_REPS)
++          state = kRepNextStates[state];
++        else
++          state = kMatchNextStates[state];
++      }
++      else
++        state = p->opt[posPrev].state;
++      state = kLiteralNextStates[state];
++    }
++    else
++      state = p->opt[posPrev].state;
++    if (posPrev == cur - 1)
++    {
++      if (IsShortRep(curOpt))
++        state = kShortRepNextStates[state];
++      else
++        state = kLiteralNextStates[state];
++    }
++    else
++    {
++      UInt32 pos;
++      const COptimal *prevOpt;
++      if (curOpt->prev1IsChar && curOpt->prev2)
++      {
++        posPrev = curOpt->posPrev2;
++        pos = curOpt->backPrev2;
++        state = kRepNextStates[state];
++      }
++      else
++      {
++        pos = curOpt->backPrev;
++        if (pos < LZMA_NUM_REPS)
++          state = kRepNextStates[state];
++        else
++          state = kMatchNextStates[state];
++      }
++      prevOpt = &p->opt[posPrev];
++      if (pos < LZMA_NUM_REPS)
++      {
++        UInt32 i;
++        reps[0] = prevOpt->backs[pos];
++        for (i = 1; i <= pos; i++)
++          reps[i] = prevOpt->backs[i - 1];
++        for (; i < LZMA_NUM_REPS; i++)
++          reps[i] = prevOpt->backs[i];
++      }
++      else
++      {
++        UInt32 i;
++        reps[0] = (pos - LZMA_NUM_REPS);
++        for (i = 1; i < LZMA_NUM_REPS; i++)
++          reps[i] = prevOpt->backs[i - 1];
++      }
++    }
++    curOpt->state = (CState)state;
++
++    curOpt->backs[0] = reps[0];
++    curOpt->backs[1] = reps[1];
++    curOpt->backs[2] = reps[2];
++    curOpt->backs[3] = reps[3];
++
++    curPrice = curOpt->price;
++    nextIsChar = False;
++    data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
++    curByte = *data;
++    matchByte = *(data - (reps[0] + 1));
++
++    posState = (position & p->pbMask);
++
++    curAnd1Price = curPrice + GET_PRICE_0(p->isMatch[state][posState]);
++    {
++      const CLzmaProb *probs = LIT_PROBS(position, *(data - 1));
++      curAnd1Price +=
++        (!IsCharState(state) ?
++          LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) :
++          LitEnc_GetPrice(probs, curByte, p->ProbPrices));
++    }
++
++    nextOpt = &p->opt[cur + 1];
++
++    if (curAnd1Price < nextOpt->price)
++    {
++      nextOpt->price = curAnd1Price;
++      nextOpt->posPrev = cur;
++      MakeAsChar(nextOpt);
++      nextIsChar = True;
++    }
++
++    matchPrice = curPrice + GET_PRICE_1(p->isMatch[state][posState]);
++    repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[state]);
++    
++    if (matchByte == curByte && !(nextOpt->posPrev < cur && nextOpt->backPrev == 0))
++    {
++      UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, state, posState);
++      if (shortRepPrice <= nextOpt->price)
++      {
++        nextOpt->price = shortRepPrice;
++        nextOpt->posPrev = cur;
++        MakeAsShortRep(nextOpt);
++        nextIsChar = True;
++      }
++    }
++    numAvailFull = p->numAvail;
++    {
++      UInt32 temp = kNumOpts - 1 - cur;
++      if (temp < numAvailFull)
++        numAvailFull = temp;
++    }
++
++    if (numAvailFull < 2)
++      continue;
++    numAvail = (numAvailFull <= p->numFastBytes ? numAvailFull : p->numFastBytes);
++
++    if (!nextIsChar && matchByte != curByte) /* speed optimization */
++    {
++      /* try Literal + rep0 */
++      UInt32 temp;
++      UInt32 lenTest2;
++      const Byte *data2 = data - (reps[0] + 1);
++      UInt32 limit = p->numFastBytes + 1;
++      if (limit > numAvailFull)
++        limit = numAvailFull;
++
++      for (temp = 1; temp < limit && data[temp] == data2[temp]; temp++);
++      lenTest2 = temp - 1;
++      if (lenTest2 >= 2)
++      {
++        UInt32 state2 = kLiteralNextStates[state];
++        UInt32 posStateNext = (position + 1) & p->pbMask;
++        UInt32 nextRepMatchPrice = curAnd1Price +
++            GET_PRICE_1(p->isMatch[state2][posStateNext]) +
++            GET_PRICE_1(p->isRep[state2]);
++        /* for (; lenTest2 >= 2; lenTest2--) */
++        {
++          UInt32 curAndLenPrice;
++          COptimal *opt;
++          UInt32 offset = cur + 1 + lenTest2;
++          while (lenEnd < offset)
++            p->opt[++lenEnd].price = kInfinityPrice;
++          curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
++          opt = &p->opt[offset];
++          if (curAndLenPrice < opt->price)
++          {
++            opt->price = curAndLenPrice;
++            opt->posPrev = cur + 1;
++            opt->backPrev = 0;
++            opt->prev1IsChar = True;
++            opt->prev2 = False;
++          }
++        }
++      }
++    }
++    
++    startLen = 2; /* speed optimization */
++    {
++    UInt32 repIndex;
++    for (repIndex = 0; repIndex < LZMA_NUM_REPS; repIndex++)
++    {
++      UInt32 lenTest;
++      UInt32 lenTestTemp;
++      UInt32 price;
++      const Byte *data2 = data - (reps[repIndex] + 1);
++      if (data[0] != data2[0] || data[1] != data2[1])
++        continue;
++      for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++);
++      while (lenEnd < cur + lenTest)
++        p->opt[++lenEnd].price = kInfinityPrice;
++      lenTestTemp = lenTest;
++      price = repMatchPrice + GetPureRepPrice(p, repIndex, state, posState);
++      do
++      {
++        UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][lenTest - 2];
++        COptimal *opt = &p->opt[cur + lenTest];
++        if (curAndLenPrice < opt->price)
++        {
++          opt->price = curAndLenPrice;
++          opt->posPrev = cur;
++          opt->backPrev = repIndex;
++          opt->prev1IsChar = False;
++        }
++      }
++      while (--lenTest >= 2);
++      lenTest = lenTestTemp;
++      
++      if (repIndex == 0)
++        startLen = lenTest + 1;
++        
++      /* if (_maxMode) */
++        {
++          UInt32 lenTest2 = lenTest + 1;
++          UInt32 limit = lenTest2 + p->numFastBytes;
++          UInt32 nextRepMatchPrice;
++          if (limit > numAvailFull)
++            limit = numAvailFull;
++          for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++);
++          lenTest2 -= lenTest + 1;
++          if (lenTest2 >= 2)
++          {
++            UInt32 state2 = kRepNextStates[state];
++            UInt32 posStateNext = (position + lenTest) & p->pbMask;
++            UInt32 curAndLenCharPrice =
++                price + p->repLenEnc.prices[posState][lenTest - 2] +
++                GET_PRICE_0(p->isMatch[state2][posStateNext]) +
++                LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]),
++                    data[lenTest], data2[lenTest], p->ProbPrices);
++            state2 = kLiteralNextStates[state2];
++            posStateNext = (position + lenTest + 1) & p->pbMask;
++            nextRepMatchPrice = curAndLenCharPrice +
++                GET_PRICE_1(p->isMatch[state2][posStateNext]) +
++                GET_PRICE_1(p->isRep[state2]);
++            
++            /* for (; lenTest2 >= 2; lenTest2--) */
++            {
++              UInt32 curAndLenPrice;
++              COptimal *opt;
++              UInt32 offset = cur + lenTest + 1 + lenTest2;
++              while (lenEnd < offset)
++                p->opt[++lenEnd].price = kInfinityPrice;
++              curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
++              opt = &p->opt[offset];
++              if (curAndLenPrice < opt->price)
++              {
++                opt->price = curAndLenPrice;
++                opt->posPrev = cur + lenTest + 1;
++                opt->backPrev = 0;
++                opt->prev1IsChar = True;
++                opt->prev2 = True;
++                opt->posPrev2 = cur;
++                opt->backPrev2 = repIndex;
++              }
++            }
++          }
++        }
++    }
++    }
++    /* for (UInt32 lenTest = 2; lenTest <= newLen; lenTest++) */
++    if (newLen > numAvail)
++    {
++      newLen = numAvail;
++      for (numPairs = 0; newLen > matches[numPairs]; numPairs += 2);
++      matches[numPairs] = newLen;
++      numPairs += 2;
++    }
++    if (newLen >= startLen)
++    {
++      UInt32 normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[state]);
++      UInt32 offs, curBack, posSlot;
++      UInt32 lenTest;
++      while (lenEnd < cur + newLen)
++        p->opt[++lenEnd].price = kInfinityPrice;
++
++      offs = 0;
++      while (startLen > matches[offs])
++        offs += 2;
++      curBack = matches[offs + 1];
++      GetPosSlot2(curBack, posSlot);
++      for (lenTest = /*2*/ startLen; ; lenTest++)
++      {
++        UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][lenTest - LZMA_MATCH_LEN_MIN];
++        UInt32 lenToPosState = GetLenToPosState(lenTest);
++        COptimal *opt;
++        if (curBack < kNumFullDistances)
++          curAndLenPrice += p->distancesPrices[lenToPosState][curBack];
++        else
++          curAndLenPrice += p->posSlotPrices[lenToPosState][posSlot] + p->alignPrices[curBack & kAlignMask];
++        
++        opt = &p->opt[cur + lenTest];
++        if (curAndLenPrice < opt->price)
++        {
++          opt->price = curAndLenPrice;
++          opt->posPrev = cur;
++          opt->backPrev = curBack + LZMA_NUM_REPS;
++          opt->prev1IsChar = False;
++        }
++
++        if (/*_maxMode && */lenTest == matches[offs])
++        {
++          /* Try Match + Literal + Rep0 */
++          const Byte *data2 = data - (curBack + 1);
++          UInt32 lenTest2 = lenTest + 1;
++          UInt32 limit = lenTest2 + p->numFastBytes;
++          UInt32 nextRepMatchPrice;
++          if (limit > numAvailFull)
++            limit = numAvailFull;
++          for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++);
++          lenTest2 -= lenTest + 1;
++          if (lenTest2 >= 2)
++          {
++            UInt32 state2 = kMatchNextStates[state];
++            UInt32 posStateNext = (position + lenTest) & p->pbMask;
++            UInt32 curAndLenCharPrice = curAndLenPrice +
++                GET_PRICE_0(p->isMatch[state2][posStateNext]) +
++                LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]),
++                    data[lenTest], data2[lenTest], p->ProbPrices);
++            state2 = kLiteralNextStates[state2];
++            posStateNext = (posStateNext + 1) & p->pbMask;
++            nextRepMatchPrice = curAndLenCharPrice +
++                GET_PRICE_1(p->isMatch[state2][posStateNext]) +
++                GET_PRICE_1(p->isRep[state2]);
++            
++            /* for (; lenTest2 >= 2; lenTest2--) */
++            {
++              UInt32 offset = cur + lenTest + 1 + lenTest2;
++              UInt32 curAndLenPrice;
++              COptimal *opt;
++              while (lenEnd < offset)
++                p->opt[++lenEnd].price = kInfinityPrice;
++              curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
++              opt = &p->opt[offset];
++              if (curAndLenPrice < opt->price)
++              {
++                opt->price = curAndLenPrice;
++                opt->posPrev = cur + lenTest + 1;
++                opt->backPrev = 0;
++                opt->prev1IsChar = True;
++                opt->prev2 = True;
++                opt->posPrev2 = cur;
++                opt->backPrev2 = curBack + LZMA_NUM_REPS;
++              }
++            }
++          }
++          offs += 2;
++          if (offs == numPairs)
++            break;
++          curBack = matches[offs + 1];
++          if (curBack >= kNumFullDistances)
++            GetPosSlot2(curBack, posSlot);
++        }
++      }
++    }
++  }
++}
++
++#define ChangePair(smallDist, bigDist) (((bigDist) >> 7) > (smallDist))
++
++static UInt32 GetOptimumFast(CLzmaEnc *p, UInt32 *backRes)
++{
++  UInt32 numAvail, mainLen, mainDist, numPairs, repIndex, repLen, i;
++  const Byte *data;
++  const UInt32 *matches;
++
++  if (p->additionalOffset == 0)
++    mainLen = ReadMatchDistances(p, &numPairs);
++  else
++  {
++    mainLen = p->longestMatchLength;
++    numPairs = p->numPairs;
++  }
++
++  numAvail = p->numAvail;
++  *backRes = (UInt32)-1;
++  if (numAvail < 2)
++    return 1;
++  if (numAvail > LZMA_MATCH_LEN_MAX)
++    numAvail = LZMA_MATCH_LEN_MAX;
++  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
++
++  repLen = repIndex = 0;
++  for (i = 0; i < LZMA_NUM_REPS; i++)
++  {
++    UInt32 len;
++    const Byte *data2 = data - (p->reps[i] + 1);
++    if (data[0] != data2[0] || data[1] != data2[1])
++      continue;
++    for (len = 2; len < numAvail && data[len] == data2[len]; len++);
++    if (len >= p->numFastBytes)
++    {
++      *backRes = i;
++      MovePos(p, len - 1);
++      return len;
++    }
++    if (len > repLen)
++    {
++      repIndex = i;
++      repLen = len;
++    }
++  }
++
++  matches = p->matches;
++  if (mainLen >= p->numFastBytes)
++  {
++    *backRes = matches[numPairs - 1] + LZMA_NUM_REPS;
++    MovePos(p, mainLen - 1);
++    return mainLen;
++  }
++
++  mainDist = 0; /* for GCC */
++  if (mainLen >= 2)
++  {
++    mainDist = matches[numPairs - 1];
++    while (numPairs > 2 && mainLen == matches[numPairs - 4] + 1)
++    {
++      if (!ChangePair(matches[numPairs - 3], mainDist))
++        break;
++      numPairs -= 2;
++      mainLen = matches[numPairs - 2];
++      mainDist = matches[numPairs - 1];
++    }
++    if (mainLen == 2 && mainDist >= 0x80)
++      mainLen = 1;
++  }
++
++  if (repLen >= 2 && (
++        (repLen + 1 >= mainLen) ||
++        (repLen + 2 >= mainLen && mainDist >= (1 << 9)) ||
++        (repLen + 3 >= mainLen && mainDist >= (1 << 15))))
++  {
++    *backRes = repIndex;
++    MovePos(p, repLen - 1);
++    return repLen;
++  }
++  
++  if (mainLen < 2 || numAvail <= 2)
++    return 1;
++
++  p->longestMatchLength = ReadMatchDistances(p, &p->numPairs);
++  if (p->longestMatchLength >= 2)
++  {
++    UInt32 newDistance = matches[p->numPairs - 1];
++    if ((p->longestMatchLength >= mainLen && newDistance < mainDist) ||
++        (p->longestMatchLength == mainLen + 1 && !ChangePair(mainDist, newDistance)) ||
++        (p->longestMatchLength > mainLen + 1) ||
++        (p->longestMatchLength + 1 >= mainLen && mainLen >= 3 && ChangePair(newDistance, mainDist)))
++      return 1;
++  }
++  
++  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
++  for (i = 0; i < LZMA_NUM_REPS; i++)
++  {
++    UInt32 len, limit;
++    const Byte *data2 = data - (p->reps[i] + 1);
++    if (data[0] != data2[0] || data[1] != data2[1])
++      continue;
++    limit = mainLen - 1;
++    for (len = 2; len < limit && data[len] == data2[len]; len++);
++    if (len >= limit)
++      return 1;
++  }
++  *backRes = mainDist + LZMA_NUM_REPS;
++  MovePos(p, mainLen - 2);
++  return mainLen;
++}
++
++static void WriteEndMarker(CLzmaEnc *p, UInt32 posState)
++{
++  UInt32 len;
++  RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1);
++  RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0);
++  p->state = kMatchNextStates[p->state];
++  len = LZMA_MATCH_LEN_MIN;
++  LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
++  RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, (1 << kNumPosSlotBits) - 1);
++  RangeEnc_EncodeDirectBits(&p->rc, (((UInt32)1 << 30) - 1) >> kNumAlignBits, 30 - kNumAlignBits);
++  RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, kAlignMask);
++}
++
++static SRes CheckErrors(CLzmaEnc *p)
++{
++  if (p->result != SZ_OK)
++    return p->result;
++  if (p->rc.res != SZ_OK)
++    p->result = SZ_ERROR_WRITE;
++  if (p->matchFinderBase.result != SZ_OK)
++    p->result = SZ_ERROR_READ;
++  if (p->result != SZ_OK)
++    p->finished = True;
++  return p->result;
++}
++
++static SRes Flush(CLzmaEnc *p, UInt32 nowPos)
++{
++  /* ReleaseMFStream(); */
++  p->finished = True;
++  if (p->writeEndMark)
++    WriteEndMarker(p, nowPos & p->pbMask);
++  RangeEnc_FlushData(&p->rc);
++  RangeEnc_FlushStream(&p->rc);
++  return CheckErrors(p);
++}
++
++static void FillAlignPrices(CLzmaEnc *p)
++{
++  UInt32 i;
++  for (i = 0; i < kAlignTableSize; i++)
++    p->alignPrices[i] = RcTree_ReverseGetPrice(p->posAlignEncoder, kNumAlignBits, i, p->ProbPrices);
++  p->alignPriceCount = 0;
++}
++
++static void FillDistancesPrices(CLzmaEnc *p)
++{
++  UInt32 tempPrices[kNumFullDistances];
++  UInt32 i, lenToPosState;
++  for (i = kStartPosModelIndex; i < kNumFullDistances; i++)
++  {
++    UInt32 posSlot = GetPosSlot1(i);
++    UInt32 footerBits = ((posSlot >> 1) - 1);
++    UInt32 base = ((2 | (posSlot & 1)) << footerBits);
++    tempPrices[i] = RcTree_ReverseGetPrice(p->posEncoders + base - posSlot - 1, footerBits, i - base, p->ProbPrices);
++  }
++
++  for (lenToPosState = 0; lenToPosState < kNumLenToPosStates; lenToPosState++)
++  {
++    UInt32 posSlot;
++    const CLzmaProb *encoder = p->posSlotEncoder[lenToPosState];
++    UInt32 *posSlotPrices = p->posSlotPrices[lenToPosState];
++    for (posSlot = 0; posSlot < p->distTableSize; posSlot++)
++      posSlotPrices[posSlot] = RcTree_GetPrice(encoder, kNumPosSlotBits, posSlot, p->ProbPrices);
++    for (posSlot = kEndPosModelIndex; posSlot < p->distTableSize; posSlot++)
++      posSlotPrices[posSlot] += ((((posSlot >> 1) - 1) - kNumAlignBits) << kNumBitPriceShiftBits);
++
++    {
++      UInt32 *distancesPrices = p->distancesPrices[lenToPosState];
++      UInt32 i;
++      for (i = 0; i < kStartPosModelIndex; i++)
++        distancesPrices[i] = posSlotPrices[i];
++      for (; i < kNumFullDistances; i++)
++        distancesPrices[i] = posSlotPrices[GetPosSlot1(i)] + tempPrices[i];
++    }
++  }
++  p->matchPriceCount = 0;
++}
++
++void LzmaEnc_Construct(CLzmaEnc *p)
++{
++  RangeEnc_Construct(&p->rc);
++  MatchFinder_Construct(&p->matchFinderBase);
++  #ifndef _7ZIP_ST
++  MatchFinderMt_Construct(&p->matchFinderMt);
++  p->matchFinderMt.MatchFinder = &p->matchFinderBase;
++  #endif
++
++  {
++    CLzmaEncProps props;
++    LzmaEncProps_Init(&props);
++    LzmaEnc_SetProps(p, &props);
++  }
++
++  #ifndef LZMA_LOG_BSR
++  LzmaEnc_FastPosInit(p->g_FastPos);
++  #endif
++
++  LzmaEnc_InitPriceTables(p->ProbPrices);
++  p->litProbs = 0;
++  p->saveState.litProbs = 0;
++}
++
++CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc)
++{
++  void *p;
++  p = alloc->Alloc(alloc, sizeof(CLzmaEnc));
++  if (p != 0)
++    LzmaEnc_Construct((CLzmaEnc *)p);
++  return p;
++}
++
++void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
++{
++  alloc->Free(alloc, p->litProbs);
++  alloc->Free(alloc, p->saveState.litProbs);
++  p->litProbs = 0;
++  p->saveState.litProbs = 0;
++}
++
++void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  #ifndef _7ZIP_ST
++  MatchFinderMt_Destruct(&p->matchFinderMt, allocBig);
++  #endif
++  MatchFinder_Free(&p->matchFinderBase, allocBig);
++  LzmaEnc_FreeLits(p, alloc);
++  RangeEnc_Free(&p->rc, alloc);
++}
++
++void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  LzmaEnc_Destruct((CLzmaEnc *)p, alloc, allocBig);
++  alloc->Free(alloc, p);
++}
++
++static SRes LzmaEnc_CodeOneBlock(CLzmaEnc *p, Bool useLimits, UInt32 maxPackSize, UInt32 maxUnpackSize)
++{
++  UInt32 nowPos32, startPos32;
++  if (p->needInit)
++  {
++    p->matchFinder.Init(p->matchFinderObj);
++    p->needInit = 0;
++  }
++
++  if (p->finished)
++    return p->result;
++  RINOK(CheckErrors(p));
++
++  nowPos32 = (UInt32)p->nowPos64;
++  startPos32 = nowPos32;
++
++  if (p->nowPos64 == 0)
++  {
++    UInt32 numPairs;
++    Byte curByte;
++    if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0)
++      return Flush(p, nowPos32);
++    ReadMatchDistances(p, &numPairs);
++    RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][0], 0);
++    p->state = kLiteralNextStates[p->state];
++    curByte = p->matchFinder.GetIndexByte(p->matchFinderObj, 0 - p->additionalOffset);
++    LitEnc_Encode(&p->rc, p->litProbs, curByte);
++    p->additionalOffset--;
++    nowPos32++;
++  }
++
++  if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) != 0)
++  for (;;)
++  {
++    UInt32 pos, len, posState;
++
++    if (p->fastMode)
++      len = GetOptimumFast(p, &pos);
++    else
++      len = GetOptimum(p, nowPos32, &pos);
++
++    #ifdef SHOW_STAT2
++    printf("\n pos = %4X,   len = %d   pos = %d", nowPos32, len, pos);
++    #endif
++
++    posState = nowPos32 & p->pbMask;
++    if (len == 1 && pos == (UInt32)-1)
++    {
++      Byte curByte;
++      CLzmaProb *probs;
++      const Byte *data;
++
++      RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 0);
++      data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
++      curByte = *data;
++      probs = LIT_PROBS(nowPos32, *(data - 1));
++      if (IsCharState(p->state))
++        LitEnc_Encode(&p->rc, probs, curByte);
++      else
++        LitEnc_EncodeMatched(&p->rc, probs, curByte, *(data - p->reps[0] - 1));
++      p->state = kLiteralNextStates[p->state];
++    }
++    else
++    {
++      RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1);
++      if (pos < LZMA_NUM_REPS)
++      {
++        RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 1);
++        if (pos == 0)
++        {
++          RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 0);
++          RangeEnc_EncodeBit(&p->rc, &p->isRep0Long[p->state][posState], ((len == 1) ? 0 : 1));
++        }
++        else
++        {
++          UInt32 distance = p->reps[pos];
++          RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 1);
++          if (pos == 1)
++            RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 0);
++          else
++          {
++            RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 1);
++            RangeEnc_EncodeBit(&p->rc, &p->isRepG2[p->state], pos - 2);
++            if (pos == 3)
++              p->reps[3] = p->reps[2];
++            p->reps[2] = p->reps[1];
++          }
++          p->reps[1] = p->reps[0];
++          p->reps[0] = distance;
++        }
++        if (len == 1)
++          p->state = kShortRepNextStates[p->state];
++        else
++        {
++          LenEnc_Encode2(&p->repLenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
++          p->state = kRepNextStates[p->state];
++        }
++      }
++      else
++      {
++        UInt32 posSlot;
++        RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0);
++        p->state = kMatchNextStates[p->state];
++        LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
++        pos -= LZMA_NUM_REPS;
++        GetPosSlot(pos, posSlot);
++        RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, posSlot);
++        
++        if (posSlot >= kStartPosModelIndex)
++        {
++          UInt32 footerBits = ((posSlot >> 1) - 1);
++          UInt32 base = ((2 | (posSlot & 1)) << footerBits);
++          UInt32 posReduced = pos - base;
++
++          if (posSlot < kEndPosModelIndex)
++            RcTree_ReverseEncode(&p->rc, p->posEncoders + base - posSlot - 1, footerBits, posReduced);
++          else
++          {
++            RangeEnc_EncodeDirectBits(&p->rc, posReduced >> kNumAlignBits, footerBits - kNumAlignBits);
++            RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, posReduced & kAlignMask);
++            p->alignPriceCount++;
++          }
++        }
++        p->reps[3] = p->reps[2];
++        p->reps[2] = p->reps[1];
++        p->reps[1] = p->reps[0];
++        p->reps[0] = pos;
++        p->matchPriceCount++;
++      }
++    }
++    p->additionalOffset -= len;
++    nowPos32 += len;
++    if (p->additionalOffset == 0)
++    {
++      UInt32 processed;
++      if (!p->fastMode)
++      {
++        if (p->matchPriceCount >= (1 << 7))
++          FillDistancesPrices(p);
++        if (p->alignPriceCount >= kAlignTableSize)
++          FillAlignPrices(p);
++      }
++      if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0)
++        break;
++      processed = nowPos32 - startPos32;
++      if (useLimits)
++      {
++        if (processed + kNumOpts + 300 >= maxUnpackSize ||
++            RangeEnc_GetProcessed(&p->rc) + kNumOpts * 2 >= maxPackSize)
++          break;
++      }
++      else if (processed >= (1 << 15))
++      {
++        p->nowPos64 += nowPos32 - startPos32;
++        return CheckErrors(p);
++      }
++    }
++  }
++  p->nowPos64 += nowPos32 - startPos32;
++  return Flush(p, nowPos32);
++}
++
++#define kBigHashDicLimit ((UInt32)1 << 24)
++
++static SRes LzmaEnc_Alloc(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  UInt32 beforeSize = kNumOpts;
++  Bool btMode;
++  if (!RangeEnc_Alloc(&p->rc, alloc))
++    return SZ_ERROR_MEM;
++  btMode = (p->matchFinderBase.btMode != 0);
++  #ifndef _7ZIP_ST
++  p->mtMode = (p->multiThread && !p->fastMode && btMode);
++  #endif
++
++  {
++    unsigned lclp = p->lc + p->lp;
++    if (p->litProbs == 0 || p->saveState.litProbs == 0 || p->lclp != lclp)
++    {
++      LzmaEnc_FreeLits(p, alloc);
++      p->litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb));
++      p->saveState.litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb));
++      if (p->litProbs == 0 || p->saveState.litProbs == 0)
++      {
++        LzmaEnc_FreeLits(p, alloc);
++        return SZ_ERROR_MEM;
++      }
++      p->lclp = lclp;
++    }
++  }
++
++  p->matchFinderBase.bigHash = (p->dictSize > kBigHashDicLimit);
++
++  if (beforeSize + p->dictSize < keepWindowSize)
++    beforeSize = keepWindowSize - p->dictSize;
++
++  #ifndef _7ZIP_ST
++  if (p->mtMode)
++  {
++    RINOK(MatchFinderMt_Create(&p->matchFinderMt, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig));
++    p->matchFinderObj = &p->matchFinderMt;
++    MatchFinderMt_CreateVTable(&p->matchFinderMt, &p->matchFinder);
++  }
++  else
++  #endif
++  {
++    if (!MatchFinder_Create(&p->matchFinderBase, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig))
++      return SZ_ERROR_MEM;
++    p->matchFinderObj = &p->matchFinderBase;
++    MatchFinder_CreateVTable(&p->matchFinderBase, &p->matchFinder);
++  }
++  return SZ_OK;
++}
++
++void LzmaEnc_Init(CLzmaEnc *p)
++{
++  UInt32 i;
++  p->state = 0;
++  for (i = 0 ; i < LZMA_NUM_REPS; i++)
++    p->reps[i] = 0;
++
++  RangeEnc_Init(&p->rc);
++
++
++  for (i = 0; i < kNumStates; i++)
++  {
++    UInt32 j;
++    for (j = 0; j < LZMA_NUM_PB_STATES_MAX; j++)
++    {
++      p->isMatch[i][j] = kProbInitValue;
++      p->isRep0Long[i][j] = kProbInitValue;
++    }
++    p->isRep[i] = kProbInitValue;
++    p->isRepG0[i] = kProbInitValue;
++    p->isRepG1[i] = kProbInitValue;
++    p->isRepG2[i] = kProbInitValue;
++  }
++
++  {
++    UInt32 num = 0x300 << (p->lp + p->lc);
++    for (i = 0; i < num; i++)
++      p->litProbs[i] = kProbInitValue;
++  }
++
++  {
++    for (i = 0; i < kNumLenToPosStates; i++)
++    {
++      CLzmaProb *probs = p->posSlotEncoder[i];
++      UInt32 j;
++      for (j = 0; j < (1 << kNumPosSlotBits); j++)
++        probs[j] = kProbInitValue;
++    }
++  }
++  {
++    for (i = 0; i < kNumFullDistances - kEndPosModelIndex; i++)
++      p->posEncoders[i] = kProbInitValue;
++  }
++
++  LenEnc_Init(&p->lenEnc.p);
++  LenEnc_Init(&p->repLenEnc.p);
++
++  for (i = 0; i < (1 << kNumAlignBits); i++)
++    p->posAlignEncoder[i] = kProbInitValue;
++
++  p->optimumEndIndex = 0;
++  p->optimumCurrentIndex = 0;
++  p->additionalOffset = 0;
++
++  p->pbMask = (1 << p->pb) - 1;
++  p->lpMask = (1 << p->lp) - 1;
++}
++
++void LzmaEnc_InitPrices(CLzmaEnc *p)
++{
++  if (!p->fastMode)
++  {
++    FillDistancesPrices(p);
++    FillAlignPrices(p);
++  }
++
++  p->lenEnc.tableSize =
++  p->repLenEnc.tableSize =
++      p->numFastBytes + 1 - LZMA_MATCH_LEN_MIN;
++  LenPriceEnc_UpdateTables(&p->lenEnc, 1 << p->pb, p->ProbPrices);
++  LenPriceEnc_UpdateTables(&p->repLenEnc, 1 << p->pb, p->ProbPrices);
++}
++
++static SRes LzmaEnc_AllocAndInit(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  UInt32 i;
++  for (i = 0; i < (UInt32)kDicLogSizeMaxCompress; i++)
++    if (p->dictSize <= ((UInt32)1 << i))
++      break;
++  p->distTableSize = i * 2;
++
++  p->finished = False;
++  p->result = SZ_OK;
++  RINOK(LzmaEnc_Alloc(p, keepWindowSize, alloc, allocBig));
++  LzmaEnc_Init(p);
++  LzmaEnc_InitPrices(p);
++  p->nowPos64 = 0;
++  return SZ_OK;
++}
++
++static SRes LzmaEnc_Prepare(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream,
++    ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  p->matchFinderBase.stream = inStream;
++  p->needInit = 1;
++  p->rc.outStream = outStream;
++  return LzmaEnc_AllocAndInit(p, 0, alloc, allocBig);
++}
++
++SRes LzmaEnc_PrepareForLzma2(CLzmaEncHandle pp,
++    ISeqInStream *inStream, UInt32 keepWindowSize,
++    ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  p->matchFinderBase.stream = inStream;
++  p->needInit = 1;
++  return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
++}
++
++static void LzmaEnc_SetInputBuf(CLzmaEnc *p, const Byte *src, SizeT srcLen)
++{
++  p->matchFinderBase.directInput = 1;
++  p->matchFinderBase.bufferBase = (Byte *)src;
++  p->matchFinderBase.directInputRem = srcLen;
++}
++
++SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen,
++    UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  LzmaEnc_SetInputBuf(p, src, srcLen);
++  p->needInit = 1;
++
++  return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
++}
++
++void LzmaEnc_Finish(CLzmaEncHandle pp)
++{
++  #ifndef _7ZIP_ST
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  if (p->mtMode)
++    MatchFinderMt_ReleaseStream(&p->matchFinderMt);
++  #else
++  pp = pp;
++  #endif
++}
++
++typedef struct
++{
++  ISeqOutStream funcTable;
++  Byte *data;
++  SizeT rem;
++  Bool overflow;
++} CSeqOutStreamBuf;
++
++static size_t MyWrite(void *pp, const void *data, size_t size)
++{
++  CSeqOutStreamBuf *p = (CSeqOutStreamBuf *)pp;
++  if (p->rem < size)
++  {
++    size = p->rem;
++    p->overflow = True;
++  }
++  memcpy(p->data, data, size);
++  p->rem -= size;
++  p->data += size;
++  return size;
++}
++
++
++UInt32 LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp)
++{
++  const CLzmaEnc *p = (CLzmaEnc *)pp;
++  return p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
++}
++
++const Byte *LzmaEnc_GetCurBuf(CLzmaEncHandle pp)
++{
++  const CLzmaEnc *p = (CLzmaEnc *)pp;
++  return p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
++}
++
++SRes LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit,
++    Byte *dest, size_t *destLen, UInt32 desiredPackSize, UInt32 *unpackSize)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  UInt64 nowPos64;
++  SRes res;
++  CSeqOutStreamBuf outStream;
++
++  outStream.funcTable.Write = MyWrite;
++  outStream.data = dest;
++  outStream.rem = *destLen;
++  outStream.overflow = False;
++
++  p->writeEndMark = False;
++  p->finished = False;
++  p->result = SZ_OK;
++
++  if (reInit)
++    LzmaEnc_Init(p);
++  LzmaEnc_InitPrices(p);
++  nowPos64 = p->nowPos64;
++  RangeEnc_Init(&p->rc);
++  p->rc.outStream = &outStream.funcTable;
++
++  res = LzmaEnc_CodeOneBlock(p, True, desiredPackSize, *unpackSize);
++  
++  *unpackSize = (UInt32)(p->nowPos64 - nowPos64);
++  *destLen -= outStream.rem;
++  if (outStream.overflow)
++    return SZ_ERROR_OUTPUT_EOF;
++
++  return res;
++}
++
++static SRes LzmaEnc_Encode2(CLzmaEnc *p, ICompressProgress *progress)
++{
++  SRes res = SZ_OK;
++
++  #ifndef _7ZIP_ST
++  Byte allocaDummy[0x300];
++  int i = 0;
++  for (i = 0; i < 16; i++)
++    allocaDummy[i] = (Byte)i;
++  #endif
++
++  for (;;)
++  {
++    res = LzmaEnc_CodeOneBlock(p, False, 0, 0);
++    if (res != SZ_OK || p->finished != 0)
++      break;
++    if (progress != 0)
++    {
++      res = progress->Progress(progress, p->nowPos64, RangeEnc_GetProcessed(&p->rc));
++      if (res != SZ_OK)
++      {
++        res = SZ_ERROR_PROGRESS;
++        break;
++      }
++    }
++  }
++  LzmaEnc_Finish(p);
++  return res;
++}
++
++SRes LzmaEnc_Encode(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream, ICompressProgress *progress,
++    ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  RINOK(LzmaEnc_Prepare(pp, outStream, inStream, alloc, allocBig));
++  return LzmaEnc_Encode2((CLzmaEnc *)pp, progress);
++}
++
++SRes LzmaEnc_WriteProperties(CLzmaEncHandle pp, Byte *props, SizeT *size)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  int i;
++  UInt32 dictSize = p->dictSize;
++  if (*size < LZMA_PROPS_SIZE)
++    return SZ_ERROR_PARAM;
++  *size = LZMA_PROPS_SIZE;
++  props[0] = (Byte)((p->pb * 5 + p->lp) * 9 + p->lc);
++
++  for (i = 11; i <= 30; i++)
++  {
++    if (dictSize <= ((UInt32)2 << i))
++    {
++      dictSize = (2 << i);
++      break;
++    }
++    if (dictSize <= ((UInt32)3 << i))
++    {
++      dictSize = (3 << i);
++      break;
++    }
++  }
++
++  for (i = 0; i < 4; i++)
++    props[1 + i] = (Byte)(dictSize >> (8 * i));
++  return SZ_OK;
++}
++
++SRes LzmaEnc_MemEncode(CLzmaEncHandle pp, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
++    int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  SRes res;
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++
++  CSeqOutStreamBuf outStream;
++
++  LzmaEnc_SetInputBuf(p, src, srcLen);
++
++  outStream.funcTable.Write = MyWrite;
++  outStream.data = dest;
++  outStream.rem = *destLen;
++  outStream.overflow = False;
++
++  p->writeEndMark = writeEndMark;
++
++  p->rc.outStream = &outStream.funcTable;
++  res = LzmaEnc_MemPrepare(pp, src, srcLen, 0, alloc, allocBig);
++  if (res == SZ_OK)
++    res = LzmaEnc_Encode2(p, progress);
++
++  *destLen -= outStream.rem;
++  if (outStream.overflow)
++    return SZ_ERROR_OUTPUT_EOF;
++  return res;
++}
++
++SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
++    const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
++    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  CLzmaEnc *p = (CLzmaEnc *)LzmaEnc_Create(alloc);
++  SRes res;
++  if (p == 0)
++    return SZ_ERROR_MEM;
++
++  res = LzmaEnc_SetProps(p, props);
++  if (res == SZ_OK)
++  {
++    res = LzmaEnc_WriteProperties(p, propsEncoded, propsSize);
++    if (res == SZ_OK)
++      res = LzmaEnc_MemEncode(p, dest, destLen, src, srcLen,
++          writeEndMark, progress, alloc, allocBig);
++  }
++
++  LzmaEnc_Destroy(p, alloc, allocBig);
++  return res;
++}
+--- /dev/null
++++ b/lib/lzma/Makefile
+@@ -0,0 +1,7 @@
++lzma_compress-objs := LzFind.o LzmaEnc.o
++lzma_decompress-objs := LzmaDec.o
++
++obj-$(CONFIG_LZMA_COMPRESS) += lzma_compress.o
++obj-$(CONFIG_LZMA_DECOMPRESS) += lzma_decompress.o
++
++EXTRA_CFLAGS += -Iinclude/linux -Iinclude/linux/lzma -include types.h
diff --git a/target/linux/generic/patches-2.6.34/011-mips_boot.patch b/target/linux/generic/patches-2.6.34/011-mips_boot.patch
new file mode 100644
index 0000000000..c2a043acde
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/011-mips_boot.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
+@@ -121,6 +121,8 @@
+ #endif
+ 	.endm
+ 
++	j kernel_entry
++	nop
+ #ifndef CONFIG_NO_EXCEPT_FILL
+ 	/*
+ 	 * Reserved space for exception handlers.
diff --git a/target/linux/generic/patches-2.6.34/012-extra_optimization.patch b/target/linux/generic/patches-2.6.34/012-extra_optimization.patch
new file mode 100644
index 0000000000..0b5174cbbd
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/012-extra_optimization.patch
@@ -0,0 +1,21 @@
+--- a/Makefile
++++ b/Makefile
+@@ -529,7 +529,7 @@ all: vmlinux
+ ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+ KBUILD_CFLAGS	+= -Os
+ else
+-KBUILD_CFLAGS	+= -O2
++KBUILD_CFLAGS	+= -O2 -fno-reorder-blocks -fno-tree-ch
+ endif
+ 
+ include $(srctree)/arch/$(SRCARCH)/Makefile
+@@ -567,6 +567,9 @@ endif
+ NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
+ CHECKFLAGS     += $(NOSTDINC_FLAGS)
+ 
++# improve gcc optimization
++CFLAGS += $(call cc-option,-funit-at-a-time,)
++
+ # warn about C99 declaration after statement
+ KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
+ 
diff --git a/target/linux/generic/patches-2.6.34/013-gcc4_inline_fix.patch b/target/linux/generic/patches-2.6.34/013-gcc4_inline_fix.patch
new file mode 100644
index 0000000000..a7082de492
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/013-gcc4_inline_fix.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/include/asm/system.h
++++ b/arch/mips/include/asm/system.h
+@@ -198,7 +198,7 @@ extern __u64 __xchg_u64_unsupported_on_3
+ #define __xchg_u64 __xchg_u64_unsupported_on_32bit_kernels
+ #endif
+ 
+-static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
++static __always_inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+ {
+ 	switch (size) {
+ 	case 4:
diff --git a/target/linux/generic/patches-2.6.34/014-samsung_flash.patch b/target/linux/generic/patches-2.6.34/014-samsung_flash.patch
new file mode 100644
index 0000000000..7010d367b8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/014-samsung_flash.patch
@@ -0,0 +1,50 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -325,6 +325,8 @@ static struct cfi_fixup fixup_table[] = 
+ static void cfi_fixup_major_minor(struct cfi_private *cfi,
+ 				  struct cfi_pri_amdstd *extp)
+ {
++	// manufacturers defined in include/linux/mtd/cfi.h
++
+ 	if (cfi->mfr == CFI_MFR_SAMSUNG && cfi->id == 0x257e &&
+ 	    extp->MajorVersion == '0')
+ 		extp->MajorVersion = '1';
+@@ -355,6 +357,9 @@ struct mtd_info *cfi_cmdset_0002(struct 
+ 	mtd->name    = map->name;
+ 	mtd->writesize = 1;
+ 
++	printk(" CFI mfr 0x%08x\n", cfi->mfr);	// TODO: Is there a more general place to print this info?
++	printk(" CFI id  0x%08x\n", cfi->id);
++
+ 	if (cfi->cfi_mode==CFI_MODE_CFI){
+ 		unsigned char bootloc;
+ 		/*
+@@ -373,16 +378,24 @@ struct mtd_info *cfi_cmdset_0002(struct 
+ 
+ 		cfi_fixup_major_minor(cfi, extp);
+ 
+-		if (extp->MajorVersion != '1' ||
+-		    (extp->MinorVersion < '0' || extp->MinorVersion > '4')) {
++		// valid primary extension versions are: 1.0, 1.1, 1.2, 1.3
++		// see: http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_r20.pdf, page 19 and on
++		//      http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_100_20011201.pdf
++		if (extp->MajorVersion < '1' ||
++		    extp->MajorVersion > '1' ||
++		    (extp->MajorVersion == '1' && ( extp->MinorVersion < '0' || extp->MinorVersion > '3'))) {
+ 			printk(KERN_ERR "  Unknown Amd/Fujitsu Extended Query "
+-			       "version %c.%c.\n",  extp->MajorVersion,
+-			       extp->MinorVersion);
++			       "version %c.%c (0x%02x/0x%02x).\n",
++			       extp->MajorVersion, extp->MinorVersion,
++			       extp->MajorVersion, extp->MinorVersion);
+ 			kfree(extp);
+ 			kfree(mtd);
+ 			return NULL;
+ 		}
+ 
++		printk("  Amd/Fujitsu Extended Query version %c.%c.\n",
++		       extp->MajorVersion, extp->MinorVersion);
++
+ 		/* Install our own private info structure */
+ 		cfi->cmdset_priv = extp;
+ 
diff --git a/target/linux/generic/patches-2.6.34/020-mips_multi_machine_support.patch b/target/linux/generic/patches-2.6.34/020-mips_multi_machine_support.patch
new file mode 100644
index 0000000000..83e24451c1
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/020-mips_multi_machine_support.patch
@@ -0,0 +1,208 @@
+--- /dev/null
++++ b/arch/mips/include/asm/mips_machine.h
+@@ -0,0 +1,54 @@
++/*
++ *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ */
++
++#ifndef __ASM_MIPS_MACHINE_H
++#define __ASM_MIPS_MACHINE_H
++
++#include <linux/init.h>
++#include <linux/list.h>
++
++#include <asm/bootinfo.h>
++
++struct mips_machine {
++	unsigned long		mach_type;
++	const char		*mach_id;
++	const char		*mach_name;
++	void			(*mach_setup)(void);
++};
++
++#define MIPS_MACHINE(_type, _id, _name, _setup) 		\
++static const char machine_name_##_type[] __initconst		\
++			__aligned(1) = _name;			\
++static const char machine_id_##_type[] __initconst		\
++			__aligned(1) = _id;			\
++static struct mips_machine machine_##_type			\
++		__used __section(.mips.machines.init) =		\
++{								\
++	.mach_type	= _type,				\
++	.mach_id	= machine_id_##_type,			\
++	.mach_name	= machine_name_##_type,			\
++	.mach_setup	= _setup,				\
++};
++
++extern long __mips_machines_start;
++extern long __mips_machines_end;
++
++#ifdef CONFIG_MIPS_MACHINE
++int  mips_machtype_setup(char *id) __init;
++void mips_machine_setup(void) __init;
++void mips_set_machine_name(const char *name) __init;
++char *mips_get_machine_name(void);
++#else
++static inline int mips_machtype_setup(char *id) { return 1; }
++static inline void mips_machine_setup(void) { }
++static inline void mips_set_machine_name(const char *name) { }
++static inline char *mips_get_machine_name(void) { return NULL; }
++#endif /* CONFIG_MIPS_MACHINE */
++
++#endif /* __ASM_MIPS_MACHINE_H */
+--- /dev/null
++++ b/arch/mips/kernel/mips_machine.c
+@@ -0,0 +1,86 @@
++/*
++ *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ */
++#include <linux/mm.h>
++#include <linux/string.h>
++#include <linux/slab.h>
++
++#include <asm/mips_machine.h>
++
++static struct mips_machine *mips_machine __initdata;
++static char *mips_machine_name = "Unknown";
++
++#define for_each_machine(mach) \
++	for ((mach) = (struct mips_machine *)&__mips_machines_start; \
++	     (mach) && \
++	     (unsigned long)(mach) < (unsigned long)&__mips_machines_end; \
++	     (mach)++)
++
++__init void mips_set_machine_name(const char *name)
++{
++	char *p;
++
++	if (name == NULL)
++		return;
++
++	p = kstrdup(name, GFP_KERNEL);
++	if (!p)
++		pr_err("MIPS: no memory for machine_name\n");
++
++	mips_machine_name = p;
++}
++
++char *mips_get_machine_name(void)
++{
++	return mips_machine_name;
++}
++
++__init int mips_machtype_setup(char *id)
++{
++	struct mips_machine *mach;
++
++	for_each_machine(mach) {
++		if (mach->mach_id == NULL)
++			continue;
++
++		if (strcmp(mach->mach_id, id) == 0) {
++			mips_machtype = mach->mach_type;
++			return 0;
++		}
++	}
++
++	pr_err("MIPS: no machine found for id '%s', supported machines:\n", id);
++	pr_err("%-24s : %s\n", "id", "name");
++	for_each_machine(mach)
++		pr_err("%-24s : %s\n", mach->mach_id, mach->mach_name);
++
++	return 1;
++}
++
++__setup("machtype=", mips_machtype_setup);
++
++__init void mips_machine_setup(void)
++{
++	struct mips_machine *mach;
++
++	for_each_machine(mach) {
++		if (mips_machtype == mach->mach_type) {
++			mips_machine = mach;
++			break;
++		}
++	}
++
++	if (!mips_machine)
++		return;
++
++	mips_set_machine_name(mips_machine->mach_name);
++	pr_info("MIPS: machine is %s\n", mips_machine_name);
++
++	if (mips_machine->mach_setup)
++		mips_machine->mach_setup();
++}
+--- a/arch/mips/kernel/Makefile
++++ b/arch/mips/kernel/Makefile
+@@ -94,6 +94,7 @@ obj-$(CONFIG_GPIO_TXX9)		+= gpio_txx9.o
+ obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
+ obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
+ obj-$(CONFIG_SPINLOCK_TEST)	+= spinlock_test.o
++obj-$(CONFIG_MIPS_MACHINE)	+= mips_machine.o
+ 
+ CFLAGS_cpu-bugs64.o	= $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
+ 
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -853,6 +853,9 @@ config MIPS_DISABLE_OBSOLETE_IDE
+ config SYNC_R4K
+ 	bool
+ 
++config MIPS_MACHINE
++	def_bool n
++
+ config NO_IOPORT
+ 	def_bool n
+ 
+--- a/arch/mips/kernel/proc.c
++++ b/arch/mips/kernel/proc.c
+@@ -12,6 +12,7 @@
+ #include <asm/cpu-features.h>
+ #include <asm/mipsregs.h>
+ #include <asm/processor.h>
++#include <asm/mips_machine.h>
+ 
+ unsigned int vced_count, vcei_count;
+ 
+@@ -31,8 +32,12 @@ static int show_cpuinfo(struct seq_file
+ 	/*
+ 	 * For the first processor also print the system type
+ 	 */
+-	if (n == 0)
++	if (n == 0) {
+ 		seq_printf(m, "system type\t\t: %s\n", get_system_type());
++		if (mips_get_machine_name())
++			seq_printf(m, "machine\t\t\t: %s\n",
++				   mips_get_machine_name());
++	}
+ 
+ 	seq_printf(m, "processor\t\t: %ld\n", n);
+ 	sprintf(fmt, "cpu model\t\t: %%s V%%d.%%d%s\n",
+--- a/arch/mips/kernel/vmlinux.lds.S
++++ b/arch/mips/kernel/vmlinux.lds.S
+@@ -98,6 +98,13 @@ SECTIONS
+ 	INIT_TEXT_SECTION(PAGE_SIZE)
+ 	INIT_DATA_SECTION(16)
+ 
++	. = ALIGN(4);
++	.mips.machines.init : AT(ADDR(.mips.machines.init) - LOAD_OFFSET) {
++		__mips_machines_start = .;
++		*(.mips.machines.init)
++		__mips_machines_end = .;
++	}
++
+ 	/* .exit.text is discarded at runtime, not link time, to deal with
+ 	 * references from .rodata
+ 	 */
diff --git a/target/linux/generic/patches-2.6.34/021-mips_image_cmdline_hack.patch b/target/linux/generic/patches-2.6.34/021-mips_image_cmdline_hack.patch
new file mode 100644
index 0000000000..a304f0bcc7
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/021-mips_image_cmdline_hack.patch
@@ -0,0 +1,28 @@
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -856,6 +856,10 @@ config SYNC_R4K
+ config MIPS_MACHINE
+ 	def_bool n
+ 
++config IMAGE_CMDLINE_HACK
++	bool "OpenWrt specific image command line hack"
++	default n
++
+ config NO_IOPORT
+ 	def_bool n
+ 
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
+@@ -143,6 +143,12 @@ FEXPORT(__kernel_entry)
+ 	j	kernel_entry
+ #endif
+ 
++#ifdef CONFIG_IMAGE_CMDLINE_HACK
++	.ascii	"CMDLINE:"
++EXPORT(__image_cmdline)
++	.fill	0x400
++#endif /* CONFIG_IMAGE_CMDLINE_HACK */
++
+ 	__REF
+ 
+ NESTED(kernel_entry, 16, sp)			# kernel entry point
diff --git a/target/linux/generic/patches-2.6.34/022-mips_use_generic_thread_info_allocator.patch b/target/linux/generic/patches-2.6.34/022-mips_use_generic_thread_info_allocator.patch
new file mode 100644
index 0000000000..786afd1dc6
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/022-mips_use_generic_thread_info_allocator.patch
@@ -0,0 +1,18 @@
+--- a/arch/mips/include/asm/thread_info.h
++++ b/arch/mips/include/asm/thread_info.h
+@@ -83,6 +83,7 @@ register struct thread_info *__current_t
+ #define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER)
+ #define THREAD_MASK (THREAD_SIZE - 1UL)
+ 
++#if 0
+ #define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+ 
+ #ifdef CONFIG_DEBUG_STACK_USAGE
+@@ -92,6 +93,7 @@ register struct thread_info *__current_t
+ #endif
+ 
+ #define free_thread_info(info) kfree(info)
++#endif
+ 
+ #endif /* !__ASSEMBLY__ */
+ 
diff --git a/target/linux/generic/patches-2.6.34/023-mips-fix-kexec.patch b/target/linux/generic/patches-2.6.34/023-mips-fix-kexec.patch
new file mode 100644
index 0000000000..e6928dde91
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/023-mips-fix-kexec.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/kernel/machine_kexec.c
++++ b/arch/mips/kernel/machine_kexec.c
+@@ -52,7 +52,7 @@ machine_kexec(struct kimage *image)
+ 	reboot_code_buffer =
+ 	  (unsigned long)page_address(image->control_code_page);
+ 
+-	kexec_start_address = image->start;
++	kexec_start_address = (unsigned long) phys_to_virt(image->start);
+ 	kexec_indirection_page =
+ 		(unsigned long) phys_to_virt(image->head & PAGE_MASK);
+ 
diff --git a/target/linux/generic/patches-2.6.34/025-mips_disable_fpu.patch b/target/linux/generic/patches-2.6.34/025-mips_disable_fpu.patch
new file mode 100644
index 0000000000..a65be6f2cf
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/025-mips_disable_fpu.patch
@@ -0,0 +1,161 @@
+MIPS: allow disabling the kernel FPU emulator
+
+This patch allows turning off the in-kernel Algorithmics
+FPU emulator support, which allows one to save a couple of
+precious blocks on an embedded system.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+--
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -841,6 +841,17 @@ config I8259
+ config MIPS_BONITO64
+ 	bool
+ 
++config MIPS_FPU_EMU
++	bool "Enable FPU emulation"
++	default y
++	help
++	   This option allows building a kernel with or without the Algorithmics
++	   FPU emulator enabled. Turning off this option results in a kernel which
++	   does not catch floating operations exceptions. Make sure that your toolchain
++	   is configured to enable software floating point emulation in that case.
++		
++	   If unsure say Y here.
++
+ config MIPS_MSC
+ 	bool
+ 
+--- a/arch/mips/math-emu/Makefile
++++ b/arch/mips/math-emu/Makefile
+@@ -2,12 +2,14 @@
+ # Makefile for the Linux/MIPS kernel FPU emulation.
+ #
+ 
+-obj-y	:= cp1emu.o ieee754m.o ieee754d.o ieee754dp.o ieee754sp.o ieee754.o \
++obj-y	:=	kernel_linkage.o dsemul.o cp1emu.o
++
++obj-$(CONFIG_MIPS_FPU_EMU)	+= ieee754m.o ieee754d.o ieee754dp.o ieee754sp.o ieee754.o \
+ 	   ieee754xcpt.o dp_frexp.o dp_modf.o dp_div.o dp_mul.o dp_sub.o \
+ 	   dp_add.o dp_fsp.o dp_cmp.o dp_logb.o dp_scalb.o dp_simple.o \
+ 	   dp_tint.o dp_fint.o dp_tlong.o dp_flong.o sp_frexp.o sp_modf.o \
+ 	   sp_div.o sp_mul.o sp_sub.o sp_add.o sp_fdp.o sp_cmp.o sp_logb.o \
+ 	   sp_scalb.o sp_simple.o sp_tint.o sp_fint.o sp_tlong.o sp_flong.o \
+-	   dp_sqrt.o sp_sqrt.o kernel_linkage.o dsemul.o
++	   dp_sqrt.o sp_sqrt.o
+ 
+ EXTRA_CFLAGS += -Werror
+--- a/arch/mips/math-emu/cp1emu.c
++++ b/arch/mips/math-emu/cp1emu.c
+@@ -58,7 +58,11 @@
+ #define __mips 4
+ 
+ /* Function which emulates a floating point instruction. */
++#ifdef CONFIG_DEBUG_FS
++DEFINE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats);
++#endif
+ 
++#ifdef CONFIG_MIPS_FPU_EMU
+ static int fpu_emu(struct pt_regs *, struct mips_fpu_struct *,
+ 	mips_instruction);
+ 
+@@ -69,10 +73,6 @@ static int fpux_emu(struct pt_regs *,
+ 
+ /* Further private data for which no space exists in mips_fpu_struct */
+ 
+-#ifdef CONFIG_DEBUG_FS
+-DEFINE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats);
+-#endif
+-
+ /* Control registers */
+ 
+ #define FPCREG_RID	0	/* $0  = revision id */
+@@ -1284,7 +1284,6 @@ int fpu_emulator_cop1Handler(struct pt_r
+ 
+ 	return sig;
+ }
+-
+ #ifdef CONFIG_DEBUG_FS
+ 
+ static int fpuemu_stat_get(void *data, u64 *val)
+@@ -1333,4 +1332,11 @@ static int __init debugfs_fpuemu(void)
+ 	return 0;
+ }
+ __initcall(debugfs_fpuemu);
+-#endif
++#endif /* CONFIG_DEBUGFS */
++#else
++int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
++        int has_fpu)
++{
++	return 0;
++}
++#endif /* CONFIG_MIPS_FPU_EMU */
+--- a/arch/mips/math-emu/dsemul.c
++++ b/arch/mips/math-emu/dsemul.c
+@@ -109,6 +109,7 @@ int mips_dsemul(struct pt_regs *regs, mi
+ 	return SIGILL;		/* force out of emulation loop */
+ }
+ 
++#ifdef CONFIG_MIPS_FPU_EMU
+ int do_dsemulret(struct pt_regs *xcp)
+ {
+ 	struct emuframe __user *fr;
+@@ -165,3 +166,9 @@ int do_dsemulret(struct pt_regs *xcp)
+ 
+ 	return 1;
+ }
++#else
++int do_dsemulret(struct pt_regs *xcp)
++{
++	return 0;
++}
++#endif /* CONFIG_MIPS_FPU_EMU */
+--- a/arch/mips/math-emu/kernel_linkage.c
++++ b/arch/mips/math-emu/kernel_linkage.c
+@@ -29,6 +29,7 @@
+ 
+ #define SIGNALLING_NAN 0x7ff800007ff80000LL
+ 
++#ifdef CONFIG_MIPS_FPU_EMU
+ void fpu_emulator_init_fpu(void)
+ {
+ 	static int first = 1;
+@@ -112,4 +113,36 @@ int fpu_emulator_restore_context32(struc
+ 
+ 	return err;
+ }
+-#endif
++#endif	/* CONFIG_64BIT */
++#else
++
++void fpu_emulator_init_fpu(void)
++{
++	printk(KERN_INFO "FPU emulator disabled, make sure your toolchain"
++		"was compiled with software floating point support (soft-float)\n");
++	return;
++}
++
++int fpu_emulator_save_context(struct sigcontext __user *sc)
++{
++	return 0;
++}
++
++int fpu_emulator_restore_context(struct sigcontext __user *sc)
++{
++	return 0;
++}
++
++int fpu_emulator_save_context32(struct sigcontext32 __user *sc)
++{
++	return 0;
++}
++
++int fpu_emulator_restore_context32(struct sigcontext32 __user *sc)
++{
++	return 0;
++}
++
++#ifdef CONFIG_64BIT
++#endif	/* CONFIG_64BIT */
++#endif /* CONFIG_MIPS_FPU_EMU */
diff --git a/target/linux/generic/patches-2.6.34/027-mips_module_reloc.patch b/target/linux/generic/patches-2.6.34/027-mips_module_reloc.patch
new file mode 100644
index 0000000000..024e7f16cd
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/027-mips_module_reloc.patch
@@ -0,0 +1,368 @@
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -93,7 +93,7 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin
+ cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe
+ cflags-y			+= -msoft-float
+ LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
+-MODFLAGS			+= -mlong-calls
++MODFLAGS			+= -mno-long-calls
+ 
+ cflags-y += -ffreestanding
+ 
+--- a/arch/mips/include/asm/module.h
++++ b/arch/mips/include/asm/module.h
+@@ -9,6 +9,11 @@ struct mod_arch_specific {
+ 	struct list_head dbe_list;
+ 	const struct exception_table_entry *dbe_start;
+ 	const struct exception_table_entry *dbe_end;
++
++	void *phys_plt_tbl;
++	void *virt_plt_tbl;
++	unsigned int phys_plt_offset;
++	unsigned int virt_plt_offset;
+ };
+ 
+ typedef uint8_t Elf64_Byte;		/* Type for a 8-bit quantity.  */
+--- a/arch/mips/kernel/module.c
++++ b/arch/mips/kernel/module.c
+@@ -43,6 +43,117 @@ static struct mips_hi16 *mips_hi16_list;
+ static LIST_HEAD(dbe_list);
+ static DEFINE_SPINLOCK(dbe_lock);
+ 
++/*
++ * Get the potential max trampolines size required of the init and
++ * non-init sections. Only used if we cannot find enough contiguous
++ * physically mapped memory to put the module into.
++ */
++static unsigned int
++get_plt_size(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
++             const char *secstrings, unsigned int symindex, bool is_init)
++{
++	unsigned long ret = 0;
++	unsigned int i, j;
++	Elf_Sym *syms;
++
++	/* Everything marked ALLOC (this includes the exported symbols) */
++	for (i = 1; i < hdr->e_shnum; ++i) {
++		unsigned int info = sechdrs[i].sh_info;
++
++		if (sechdrs[i].sh_type != SHT_REL
++		    && sechdrs[i].sh_type != SHT_RELA)
++			continue;
++
++		/* Not a valid relocation section? */
++		if (info >= hdr->e_shnum)
++			continue;
++
++		/* Don't bother with non-allocated sections */
++		if (!(sechdrs[info].sh_flags & SHF_ALLOC))
++			continue;
++
++		/* If it's called *.init*, and we're not init, we're
++                   not interested */
++		if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0)
++		    != is_init)
++			continue;
++
++		syms = (Elf_Sym *) sechdrs[symindex].sh_addr;
++		if (sechdrs[i].sh_type == SHT_REL) {
++			Elf_Mips_Rel *rel = (void *) sechdrs[i].sh_addr;
++			unsigned int size = sechdrs[i].sh_size / sizeof(*rel);
++
++			for (j = 0; j < size; ++j) {
++				Elf_Sym *sym;
++
++				if (ELF_MIPS_R_TYPE(rel[j]) != R_MIPS_26)
++					continue;
++
++				sym = syms + ELF_MIPS_R_SYM(rel[j]);
++				if (!is_init && sym->st_shndx != SHN_UNDEF)
++					continue;
++
++				ret += 4 * sizeof(int);
++			}
++		} else {
++			Elf_Mips_Rela *rela = (void *) sechdrs[i].sh_addr;
++			unsigned int size = sechdrs[i].sh_size / sizeof(*rela);
++
++			for (j = 0; j < size; ++j) {
++				Elf_Sym *sym;
++
++				if (ELF_MIPS_R_TYPE(rela[j]) != R_MIPS_26)
++					continue;
++
++				sym = syms + ELF_MIPS_R_SYM(rela[j]);
++				if (!is_init && sym->st_shndx != SHN_UNDEF)
++					continue;
++
++				ret += 4 * sizeof(int);
++			}
++		}
++	}
++
++	return ret;
++}
++
++#ifndef MODULE_START
++static void *alloc_phys(unsigned long size)
++{
++	unsigned order;
++	struct page *page;
++	struct page *p;
++
++	size = PAGE_ALIGN(size);
++	order = get_order(size);
++
++	page = alloc_pages(GFP_KERNEL | __GFP_NORETRY | __GFP_NOWARN |
++			__GFP_THISNODE, order);
++	if (!page)
++		return NULL;
++
++	split_page(page, order);
++
++	for (p = page + (size >> PAGE_SHIFT); p < page + (1 << order); ++p)
++		__free_page(p);
++
++	return page_address(page);
++}
++#endif
++
++static void free_phys(void *ptr, unsigned long size)
++{
++	struct page *page;
++	struct page *end;
++
++	page = virt_to_page(ptr);
++	end = page + (PAGE_ALIGN(size) >> PAGE_SHIFT);
++
++	for (; page < end; ++page)
++		__free_page(page);
++}
++
++
+ void *module_alloc(unsigned long size)
+ {
+ #ifdef MODULE_START
+@@ -58,21 +169,99 @@ void *module_alloc(unsigned long size)
+ 
+ 	return __vmalloc_area(area, GFP_KERNEL, PAGE_KERNEL);
+ #else
++	void *ptr;
++
+ 	if (size == 0)
+ 		return NULL;
+-	return vmalloc(size);
++
++	ptr = alloc_phys(size);
++
++	/* If we failed to allocate physically contiguous memory,
++	 * fall back to regular vmalloc. The module loader code will
++	 * create jump tables to handle long jumps */
++	if (!ptr)
++		return vmalloc(size);
++
++	return ptr;
++#endif
++}
++
++static inline bool is_phys_addr(void *ptr)
++{
++#ifdef CONFIG_64BIT
++	return (KSEGX((unsigned long)ptr) == CKSEG0);
++#else
++	return (KSEGX(ptr) == KSEG0);
+ #endif
+ }
+ 
+ /* Free memory returned from module_alloc */
+ void module_free(struct module *mod, void *module_region)
+ {
+-	vfree(module_region);
++	if (is_phys_addr(module_region)) {
++		if (mod->module_init == module_region)
++			free_phys(module_region, mod->init_size);
++		else if (mod->module_core == module_region)
++			free_phys(module_region, mod->core_size);
++		else
++			BUG();
++	} else {
++		vfree(module_region);
++	}
++}
++
++static void *__module_alloc(int size, bool phys)
++{
++	void *ptr;
++
++	if (phys)
++		ptr = kmalloc(size, GFP_KERNEL);
++	else
++		ptr = vmalloc(size);
++	return ptr;
++}
++
++static void __module_free(void *ptr)
++{
++	if (is_phys_addr(ptr))
++		kfree(ptr);
++	else
++		vfree(ptr);
+ }
+ 
+ int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
+ 			      char *secstrings, struct module *mod)
+ {
++	unsigned int symindex = 0;
++	unsigned int core_size, init_size;
++	int i;
++
++	for (i = 1; i < hdr->e_shnum; i++)
++		if (sechdrs[i].sh_type == SHT_SYMTAB)
++			symindex = i;
++
++	core_size = get_plt_size(hdr, sechdrs, secstrings, symindex, false);
++	init_size = get_plt_size(hdr, sechdrs, secstrings, symindex, true);
++
++	mod->arch.phys_plt_offset = 0;
++	mod->arch.virt_plt_offset = 0;
++	mod->arch.phys_plt_tbl = NULL;
++	mod->arch.virt_plt_tbl = NULL;
++
++	if ((core_size + init_size) == 0)
++		return 0;
++
++	mod->arch.phys_plt_tbl = __module_alloc(core_size + init_size, 1);
++	if (!mod->arch.phys_plt_tbl)
++		return -ENOMEM;
++
++	mod->arch.virt_plt_tbl = __module_alloc(core_size + init_size, 0);
++	if (!mod->arch.virt_plt_tbl) {
++		__module_free(mod->arch.phys_plt_tbl);
++		mod->arch.phys_plt_tbl = NULL;
++		return -ENOMEM;
++	}
++
+ 	return 0;
+ }
+ 
+@@ -95,28 +284,36 @@ static int apply_r_mips_32_rela(struct m
+ 	return 0;
+ }
+ 
+-static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
++static Elf_Addr add_plt_entry_to(unsigned *plt_offset,
++				 void *start, Elf_Addr v)
+ {
+-	if (v % 4) {
+-		pr_err("module %s: dangerous R_MIPS_26 REL relocation\n",
+-		       me->name);
+-		return -ENOEXEC;
+-	}
++	unsigned *tramp = start + *plt_offset;
++	*plt_offset += 4 * sizeof(int);
+ 
+-	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+-		printk(KERN_ERR
+-		       "module %s: relocation overflow\n",
+-		       me->name);
+-		return -ENOEXEC;
+-	}
++	/* adjust carry for addiu */
++	if (v & 0x00008000)
++		v += 0x10000;
+ 
+-	*location = (*location & ~0x03ffffff) |
+-	            ((*location + (v >> 2)) & 0x03ffffff);
++	tramp[0] = 0x3c190000 | (v >> 16);      /* lui t9, hi16 */
++	tramp[1] = 0x27390000 | (v & 0xffff);   /* addiu t9, t9, lo16 */
++	tramp[2] = 0x03200008;                  /* jr t9 */
++	tramp[3] = 0x00000000;                  /* nop */
+ 
+-	return 0;
++	return (Elf_Addr) tramp;
+ }
+ 
+-static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v)
++static Elf_Addr add_plt_entry(struct module *me, void *location, Elf_Addr v)
++{
++	if (is_phys_addr(location))
++		return add_plt_entry_to(&me->arch.phys_plt_offset,
++				me->arch.phys_plt_tbl, v);
++	else
++		return add_plt_entry_to(&me->arch.virt_plt_offset,
++				me->arch.virt_plt_tbl, v);
++
++}
++
++static int set_r_mips_26(struct module *me, u32 *location, u32 ofs, Elf_Addr v)
+ {
+ 	if (v % 4) {
+ 		pr_err("module %s: dangerous R_MIPS_26 RELArelocation\n",
+@@ -125,17 +322,31 @@ static int apply_r_mips_26_rela(struct m
+ 	}
+ 
+ 	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+-		printk(KERN_ERR
++	    v = add_plt_entry(me, location, v + (ofs << 2));
++		if (!v) {
++			printk(KERN_ERR
+ 		       "module %s: relocation overflow\n",
+ 		       me->name);
+-		return -ENOEXEC;
++			return -ENOEXEC;
++		}
++		ofs = 0;
+ 	}
+ 
+-	*location = (*location & ~0x03ffffff) | ((v >> 2) & 0x03ffffff);
++	*location = (*location & ~0x03ffffff) | ((ofs + (v >> 2)) & 0x03ffffff);
+ 
+ 	return 0;
+ }
+ 
++static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
++{
++	return set_r_mips_26(me, location, *location & 0x03ffffff, v);
++}
++
++static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v)
++{
++	return set_r_mips_26(me, location, 0, v);
++}
++
+ static int apply_r_mips_hi16_rel(struct module *me, u32 *location, Elf_Addr v)
+ {
+ 	struct mips_hi16 *n;
+@@ -400,11 +611,32 @@ int module_finalize(const Elf_Ehdr *hdr,
+ 		list_add(&me->arch.dbe_list, &dbe_list);
+ 		spin_unlock_irq(&dbe_lock);
+ 	}
++
++	/* Get rid of the fixup trampoline if we're running the module
++	 * from physically mapped address space */
++	if (me->arch.phys_plt_offset == 0) {
++		__module_free(me->arch.phys_plt_tbl);
++		me->arch.phys_plt_tbl = NULL;
++	}
++	if (me->arch.virt_plt_offset == 0) {
++		__module_free(me->arch.virt_plt_tbl);
++		me->arch.virt_plt_tbl = NULL;
++	}
++
+ 	return 0;
+ }
+ 
+ void module_arch_cleanup(struct module *mod)
+ {
++	if (mod->arch.phys_plt_tbl) {
++		__module_free(mod->arch.phys_plt_tbl);
++		mod->arch.phys_plt_tbl = NULL;
++	}
++	if (mod->arch.virt_plt_tbl) {
++		__module_free(mod->arch.virt_plt_tbl);
++		mod->arch.virt_plt_tbl = NULL;
++	}
++
+ 	spin_lock_irq(&dbe_lock);
+ 	list_del(&mod->arch.dbe_list);
+ 	spin_unlock_irq(&dbe_lock);
diff --git a/target/linux/generic/patches-2.6.34/028-module_exports.patch b/target/linux/generic/patches-2.6.34/028-module_exports.patch
new file mode 100644
index 0000000000..ad9074a885
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/028-module_exports.patch
@@ -0,0 +1,119 @@
+--- a/include/asm-generic/vmlinux.lds.h
++++ b/include/asm-generic/vmlinux.lds.h
+@@ -52,6 +52,27 @@
+ #define LOAD_OFFSET 0
+ #endif
+ 
++#ifndef SYMTAB_KEEP_STR
++#define SYMTAB_KEEP_STR *(__ksymtab_strings.*)
++#define SYMTAB_DISCARD_STR
++#else
++#define SYMTAB_DISCARD_STR *(__ksymtab_strings.*)
++#endif
++
++#ifndef SYMTAB_KEEP
++#define SYMTAB_KEEP *(__ksymtab.*)
++#define SYMTAB_DISCARD
++#else
++#define SYMTAB_DISCARD *(__ksymtab.*)
++#endif
++
++#ifndef SYMTAB_KEEP_GPL
++#define SYMTAB_KEEP_GPL *(__ksymtab_gpl.*)
++#define SYMTAB_DISCARD_GPL
++#else
++#define SYMTAB_DISCARD_GPL *(__ksymtab_gpl.*)
++#endif
++
+ #ifndef SYMBOL_PREFIX
+ #define VMLINUX_SYMBOL(sym) sym
+ #else
+@@ -258,35 +279,35 @@
+ 	/* Kernel symbol table: Normal symbols */			\
+ 	__ksymtab         : AT(ADDR(__ksymtab) - LOAD_OFFSET) {		\
+ 		VMLINUX_SYMBOL(__start___ksymtab) = .;			\
+-		*(__ksymtab)						\
++		SYMTAB_KEEP						\
+ 		VMLINUX_SYMBOL(__stop___ksymtab) = .;			\
+ 	}								\
+ 									\
+ 	/* Kernel symbol table: GPL-only symbols */			\
+ 	__ksymtab_gpl     : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) {	\
+ 		VMLINUX_SYMBOL(__start___ksymtab_gpl) = .;		\
+-		*(__ksymtab_gpl)					\
++		SYMTAB_KEEP_GPL						\
+ 		VMLINUX_SYMBOL(__stop___ksymtab_gpl) = .;		\
+ 	}								\
+ 									\
+ 	/* Kernel symbol table: Normal unused symbols */		\
+ 	__ksymtab_unused  : AT(ADDR(__ksymtab_unused) - LOAD_OFFSET) {	\
+ 		VMLINUX_SYMBOL(__start___ksymtab_unused) = .;		\
+-		*(__ksymtab_unused)					\
++		*(__ksymtab_unused.*)					\
+ 		VMLINUX_SYMBOL(__stop___ksymtab_unused) = .;		\
+ 	}								\
+ 									\
+ 	/* Kernel symbol table: GPL-only unused symbols */		\
+ 	__ksymtab_unused_gpl : AT(ADDR(__ksymtab_unused_gpl) - LOAD_OFFSET) { \
+ 		VMLINUX_SYMBOL(__start___ksymtab_unused_gpl) = .;	\
+-		*(__ksymtab_unused_gpl)					\
++		*(__ksymtab_unused_gpl.*)				\
+ 		VMLINUX_SYMBOL(__stop___ksymtab_unused_gpl) = .;	\
+ 	}								\
+ 									\
+ 	/* Kernel symbol table: GPL-future-only symbols */		\
+ 	__ksymtab_gpl_future : AT(ADDR(__ksymtab_gpl_future) - LOAD_OFFSET) { \
+ 		VMLINUX_SYMBOL(__start___ksymtab_gpl_future) = .;	\
+-		*(__ksymtab_gpl_future)					\
++		*(__ksymtab_gpl_future.*)				\
+ 		VMLINUX_SYMBOL(__stop___ksymtab_gpl_future) = .;	\
+ 	}								\
+ 									\
+@@ -327,7 +348,7 @@
+ 									\
+ 	/* Kernel symbol table: strings */				\
+         __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) {	\
+-		*(__ksymtab_strings)					\
++		SYMTAB_KEEP_STR						\
+ 	}								\
+ 									\
+ 	/* __*init sections */						\
+@@ -642,6 +663,9 @@
+ 	EXIT_TEXT							\
+ 	EXIT_DATA							\
+ 	EXIT_CALL							\
++	SYMTAB_DISCARD							\
++	SYMTAB_DISCARD_GPL						\
++	SYMTAB_DISCARD_STR						\
+ 	*(.discard)							\
+ 	}
+ 
+--- a/include/linux/module.h
++++ b/include/linux/module.h
+@@ -195,16 +195,24 @@ void *__symbol_get_gpl(const char *symbo
+ #define __CRC_SYMBOL(sym, sec)
+ #endif
+ 
++#ifdef MODULE
++#define __EXPORT_SUFFIX(sym)
++#else
++#define __EXPORT_SUFFIX(sym) "." #sym
++#endif
++
+ /* For every exported symbol, place a struct in the __ksymtab section */
+ #define __EXPORT_SYMBOL(sym, sec)				\
+ 	extern typeof(sym) sym;					\
+ 	__CRC_SYMBOL(sym, sec)					\
+ 	static const char __kstrtab_##sym[]			\
+-	__attribute__((section("__ksymtab_strings"), aligned(1))) \
++	__attribute__((section("__ksymtab_strings"		\
++	  __EXPORT_SUFFIX(sym)), aligned(1)))			\
+ 	= MODULE_SYMBOL_PREFIX #sym;                    	\
+ 	static const struct kernel_symbol __ksymtab_##sym	\
+ 	__used							\
+-	__attribute__((section("__ksymtab" sec), unused))	\
++	__attribute__((section("__ksymtab" sec			\
++	  __EXPORT_SUFFIX(sym)), unused))			\
+ 	= { (unsigned long)&sym, __kstrtab_##sym }
+ 
+ #define EXPORT_SYMBOL(sym)					\
diff --git a/target/linux/generic/patches-2.6.34/029-arm_module_unresolved_weak_sym.patch b/target/linux/generic/patches-2.6.34/029-arm_module_unresolved_weak_sym.patch
new file mode 100644
index 0000000000..8a3b2e23cb
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/029-arm_module_unresolved_weak_sym.patch
@@ -0,0 +1,13 @@
+--- a/arch/arm/kernel/module.c
++++ b/arch/arm/kernel/module.c
+@@ -121,6 +121,10 @@ apply_relocate(Elf32_Shdr *sechdrs, cons
+ 			return -ENOEXEC;
+ 		}
+ 
++		if ((IS_ERR_VALUE(sym->st_value) || !sym->st_value) &&
++		    ELF_ST_BIND(sym->st_info) == STB_WEAK)
++			continue;
++
+ 		loc = dstsec->sh_addr + rel->r_offset;
+ 
+ 		switch (ELF32_R_TYPE(rel->r_info)) {
diff --git a/target/linux/generic/patches-2.6.34/030-pci_disable_common_quirks.patch b/target/linux/generic/patches-2.6.34/030-pci_disable_common_quirks.patch
new file mode 100644
index 0000000000..0cf19789ae
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/030-pci_disable_common_quirks.patch
@@ -0,0 +1,43 @@
+--- a/drivers/pci/Kconfig
++++ b/drivers/pci/Kconfig
+@@ -40,6 +40,12 @@ config PCI_STUB
+ 
+ 	  When in doubt, say N.
+ 
++config PCI_DISABLE_COMMON_QUIRKS
++	bool "PCI disable common quirks"
++	depends on PCI
++	help
++	  If you don't know what to do here, say N.
++
+ config HT_IRQ
+ 	bool "Interrupts on hypertransport devices"
+ 	default y
+--- a/drivers/pci/quirks.c
++++ b/drivers/pci/quirks.c
+@@ -91,6 +91,7 @@ static void __devinit quirk_resource_ali
+ }
+ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_resource_alignment);
+ 
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
+ /* The Mellanox Tavor device gives false positive parity errors
+  * Mark this device with a broken_parity_status, to allow
+  * PCI scanning code to "skip" this now blacklisted device.
+@@ -1901,7 +1902,9 @@ static void __devinit fixup_rev1_53c810(
+ 	}
+ }
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
++#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
+ 
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
+ /* Enable 1k I/O space granularity on the Intel P64H2 */
+ static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
+ {
+@@ -2551,6 +2554,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1518, quirk_i82576_sriov);
+ 
+ #endif	/* CONFIG_PCI_IOV */
++#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
+ 
+ /*
+  * This is a quirk for the Ricoh MMC controller found as a part of
diff --git a/target/linux/generic/patches-2.6.34/031-ppc_gcc_build_fix.patch b/target/linux/generic/patches-2.6.34/031-ppc_gcc_build_fix.patch
new file mode 100644
index 0000000000..be4d2bfc2d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/031-ppc_gcc_build_fix.patch
@@ -0,0 +1,226 @@
+GCC 4.4.x looks to be adding support for generating out-of-line register
+saves/restores based on:
+
+http://gcc.gnu.org/ml/gcc-patches/2008-04/msg01678.html
+
+This breaks the kernel build as we'd have to link with libgcc to get the
+implementation of the register save/restores.
+
+To workaround this issue, we just stole the save/restore code from gcc
+and simplified it down for our needs (integer only).  We only do this if
+PPC32 as gcc makes believe the linker on ppc64 will deal with this and
+only if CONFIG_CC_OPTIMIZE_FOR_SIZE is set (thus -Os).
+
+Signed-off-by: Kumar Gala <[EMAIL PROTECTED]>
+---
+
+If someone using cutting edge toolchains for ppc64 could test and make
+sure if we enable CONFIG_CC_OPTIMIZE_FOR_SIZE things work that would be
+nice.
+
+- k
+
+ arch/powerpc/kernel/misc_32.S   |   77 +++++++++++++++++++++++++++
+ arch/powerpc/kernel/ppc_ksyms.c |  111 +++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 188 insertions(+), 0 deletions(-)
+
+--- a/arch/powerpc/kernel/misc_32.S
++++ b/arch/powerpc/kernel/misc_32.S
+@@ -802,3 +802,80 @@ relocate_new_kernel_end:
+ relocate_new_kernel_size:
+ 	.long relocate_new_kernel_end - relocate_new_kernel
+ #endif
++
++#if defined(CONFIG_PPC32) && defined(CONFIG_CC_OPTIMIZE_FOR_SIZE)
++/* Routines for saving integer registers, called by the compiler.  */
++/* Called with r11 pointing to the stack header word of the caller of the */
++/* function, just beyond the end of the integer save area.  */
++
++_GLOBAL(_savegpr_14)   stw     14,-72(11)      /* save gp registers */
++_GLOBAL(_savegpr_15)   stw     15,-68(11)
++_GLOBAL(_savegpr_16)   stw     16,-64(11)
++_GLOBAL(_savegpr_17)   stw     17,-60(11)
++_GLOBAL(_savegpr_18)   stw     18,-56(11)
++_GLOBAL(_savegpr_19)   stw     19,-52(11)
++_GLOBAL(_savegpr_20)   stw     20,-48(11)
++_GLOBAL(_savegpr_21)   stw     21,-44(11)
++_GLOBAL(_savegpr_22)   stw     22,-40(11)
++_GLOBAL(_savegpr_23)   stw     23,-36(11)
++_GLOBAL(_savegpr_24)   stw     24,-32(11)
++_GLOBAL(_savegpr_25)   stw     25,-28(11)
++_GLOBAL(_savegpr_26)   stw     26,-24(11)
++_GLOBAL(_savegpr_27)   stw     27,-20(11)
++_GLOBAL(_savegpr_28)   stw     28,-16(11)
++_GLOBAL(_savegpr_29)   stw     29,-12(11)
++_GLOBAL(_savegpr_30)   stw     30,-8(11)
++_GLOBAL(_savegpr_31)   stw     31,-4(11)
++                       blr
++
++/* Routines for restoring integer registers, called by the compiler.  */
++/* Called with r11 pointing to the stack header word of the caller of the */
++/* function, just beyond the end of the integer restore area.  */
++
++_GLOBAL(_restgpr_14)   lwz     14,-72(11)      /* restore gp registers */
++_GLOBAL(_restgpr_15)   lwz     15,-68(11)
++_GLOBAL(_restgpr_16)   lwz     16,-64(11)
++_GLOBAL(_restgpr_17)   lwz     17,-60(11)
++_GLOBAL(_restgpr_18)   lwz     18,-56(11)
++_GLOBAL(_restgpr_19)   lwz     19,-52(11)
++_GLOBAL(_restgpr_20)   lwz     20,-48(11)
++_GLOBAL(_restgpr_21)   lwz     21,-44(11)
++_GLOBAL(_restgpr_22)   lwz     22,-40(11)
++_GLOBAL(_restgpr_23)   lwz     23,-36(11)
++_GLOBAL(_restgpr_24)   lwz     24,-32(11)
++_GLOBAL(_restgpr_25)   lwz     25,-28(11)
++_GLOBAL(_restgpr_26)   lwz     26,-24(11)
++_GLOBAL(_restgpr_27)   lwz     27,-20(11)
++_GLOBAL(_restgpr_28)   lwz     28,-16(11)
++_GLOBAL(_restgpr_29)   lwz     29,-12(11)
++_GLOBAL(_restgpr_30)   lwz     30,-8(11)
++_GLOBAL(_restgpr_31)   lwz     31,-4(11)
++                       blr
++
++/* Routines for restoring integer registers, called by the compiler.  */
++/* Called with r11 pointing to the stack header word of the caller of the */
++/* function, just beyond the end of the integer restore area.  */
++
++_GLOBAL(_restgpr_14_x) lwz     14,-72(11)      /* restore gp registers */
++_GLOBAL(_restgpr_15_x) lwz     15,-68(11)
++_GLOBAL(_restgpr_16_x) lwz     16,-64(11)
++_GLOBAL(_restgpr_17_x) lwz     17,-60(11)
++_GLOBAL(_restgpr_18_x) lwz     18,-56(11)
++_GLOBAL(_restgpr_19_x) lwz     19,-52(11)
++_GLOBAL(_restgpr_20_x) lwz     20,-48(11)
++_GLOBAL(_restgpr_21_x) lwz     21,-44(11)
++_GLOBAL(_restgpr_22_x) lwz     22,-40(11)
++_GLOBAL(_restgpr_23_x) lwz     23,-36(11)
++_GLOBAL(_restgpr_24_x) lwz     24,-32(11)
++_GLOBAL(_restgpr_25_x) lwz     25,-28(11)
++_GLOBAL(_restgpr_26_x) lwz     26,-24(11)
++_GLOBAL(_restgpr_27_x) lwz     27,-20(11)
++_GLOBAL(_restgpr_28_x) lwz     28,-16(11)
++_GLOBAL(_restgpr_29_x) lwz     29,-12(11)
++_GLOBAL(_restgpr_30_x) lwz     30,-8(11)
++_GLOBAL(_restgpr_31_x) lwz     0,4(11)
++                       lwz     31,-4(11)
++                       mtlr    0
++                       mr      1,11
++                       blr
++#endif
+--- a/arch/powerpc/kernel/ppc_ksyms.c
++++ b/arch/powerpc/kernel/ppc_ksyms.c
+@@ -186,3 +186,114 @@ EXPORT_SYMBOL(__mtdcr);
+ EXPORT_SYMBOL(__mfdcr);
+ #endif
+ EXPORT_SYMBOL(empty_zero_page);
++
++#if defined(CONFIG_PPC32) && defined(CONFIG_CC_OPTIMIZE_FOR_SIZE)
++void _savegpr_14(void);
++void _savegpr_15(void);
++void _savegpr_16(void);
++void _savegpr_17(void);
++void _savegpr_18(void);
++void _savegpr_19(void);
++void _savegpr_20(void);
++void _savegpr_21(void);
++void _savegpr_22(void);
++void _savegpr_23(void);
++void _savegpr_24(void);
++void _savegpr_25(void);
++void _savegpr_26(void);
++void _savegpr_27(void);
++void _savegpr_28(void);
++void _savegpr_29(void);
++void _savegpr_30(void);
++void _savegpr_31(void);
++void _restgpr_14(void);
++void _restgpr_15(void);
++void _restgpr_16(void);
++void _restgpr_17(void);
++void _restgpr_18(void);
++void _restgpr_19(void);
++void _restgpr_20(void);
++void _restgpr_21(void);
++void _restgpr_22(void);
++void _restgpr_23(void);
++void _restgpr_24(void);
++void _restgpr_25(void);
++void _restgpr_26(void);
++void _restgpr_27(void);
++void _restgpr_28(void);
++void _restgpr_29(void);
++void _restgpr_30(void);
++void _restgpr_31(void);
++void _restgpr_14_x(void);
++void _restgpr_15_x(void);
++void _restgpr_16_x(void);
++void _restgpr_17_x(void);
++void _restgpr_18_x(void);
++void _restgpr_19_x(void);
++void _restgpr_20_x(void);
++void _restgpr_21_x(void);
++void _restgpr_22_x(void);
++void _restgpr_23_x(void);
++void _restgpr_24_x(void);
++void _restgpr_25_x(void);
++void _restgpr_26_x(void);
++void _restgpr_27_x(void);
++void _restgpr_28_x(void);
++void _restgpr_29_x(void);
++void _restgpr_30_x(void);
++void _restgpr_31_x(void);
++EXPORT_SYMBOL(_savegpr_14);
++EXPORT_SYMBOL(_savegpr_15);
++EXPORT_SYMBOL(_savegpr_16);
++EXPORT_SYMBOL(_savegpr_17);
++EXPORT_SYMBOL(_savegpr_18);
++EXPORT_SYMBOL(_savegpr_19);
++EXPORT_SYMBOL(_savegpr_20);
++EXPORT_SYMBOL(_savegpr_21);
++EXPORT_SYMBOL(_savegpr_22);
++EXPORT_SYMBOL(_savegpr_23);
++EXPORT_SYMBOL(_savegpr_24);
++EXPORT_SYMBOL(_savegpr_25);
++EXPORT_SYMBOL(_savegpr_26);
++EXPORT_SYMBOL(_savegpr_27);
++EXPORT_SYMBOL(_savegpr_28);
++EXPORT_SYMBOL(_savegpr_29);
++EXPORT_SYMBOL(_savegpr_30);
++EXPORT_SYMBOL(_savegpr_31);
++EXPORT_SYMBOL(_restgpr_14);
++EXPORT_SYMBOL(_restgpr_15);
++EXPORT_SYMBOL(_restgpr_16);
++EXPORT_SYMBOL(_restgpr_17);
++EXPORT_SYMBOL(_restgpr_18);
++EXPORT_SYMBOL(_restgpr_19);
++EXPORT_SYMBOL(_restgpr_20);
++EXPORT_SYMBOL(_restgpr_21);
++EXPORT_SYMBOL(_restgpr_22);
++EXPORT_SYMBOL(_restgpr_23);
++EXPORT_SYMBOL(_restgpr_24);
++EXPORT_SYMBOL(_restgpr_25);
++EXPORT_SYMBOL(_restgpr_26);
++EXPORT_SYMBOL(_restgpr_27);
++EXPORT_SYMBOL(_restgpr_28);
++EXPORT_SYMBOL(_restgpr_29);
++EXPORT_SYMBOL(_restgpr_30);
++EXPORT_SYMBOL(_restgpr_31);
++EXPORT_SYMBOL(_restgpr_14_x);
++EXPORT_SYMBOL(_restgpr_15_x);
++EXPORT_SYMBOL(_restgpr_16_x);
++EXPORT_SYMBOL(_restgpr_17_x);
++EXPORT_SYMBOL(_restgpr_18_x);
++EXPORT_SYMBOL(_restgpr_19_x);
++EXPORT_SYMBOL(_restgpr_20_x);
++EXPORT_SYMBOL(_restgpr_21_x);
++EXPORT_SYMBOL(_restgpr_22_x);
++EXPORT_SYMBOL(_restgpr_23_x);
++EXPORT_SYMBOL(_restgpr_24_x);
++EXPORT_SYMBOL(_restgpr_25_x);
++EXPORT_SYMBOL(_restgpr_26_x);
++EXPORT_SYMBOL(_restgpr_27_x);
++EXPORT_SYMBOL(_restgpr_28_x);
++EXPORT_SYMBOL(_restgpr_29_x);
++EXPORT_SYMBOL(_restgpr_30_x);
++EXPORT_SYMBOL(_restgpr_31_x);
++#endif /* CONFIG_PPC32 && CONFIG_CC_OPTIMIZE_FOR_SIZE */
diff --git a/target/linux/generic/patches-2.6.34/055-lzma_arm_kernel.patch b/target/linux/generic/patches-2.6.34/055-lzma_arm_kernel.patch
new file mode 100644
index 0000000000..cda31d2f71
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/055-lzma_arm_kernel.patch
@@ -0,0 +1,57 @@
+From d0f226a0f104c7d1da1d215b8013359273e39e18 Mon Sep 17 00:00:00 2001
+From: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+Date: Fri, 16 Oct 2009 16:17:22 +0200
+Subject: [PATCH] Add LZMA decompression on ARM
+
+
+Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+---
+ arch/arm/Kconfig                      |    1 +
+ arch/arm/boot/compressed/Makefile     |    1 +
+ arch/arm/boot/compressed/misc.c       |    4 ++++
+ arch/arm/boot/compressed/piggy.lzma.S |    6 ++++++
+ 4 files changed, 12 insertions(+), 0 deletions(-)
+ create mode 100644 arch/arm/boot/compressed/piggy.lzma.S
+
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -21,6 +21,7 @@ config ARM
+ 	select HAVE_GENERIC_DMA_COHERENT
+ 	select HAVE_KERNEL_GZIP
+ 	select HAVE_KERNEL_LZO
++	select HAVE_KERNEL_LZMA
+ 	select HAVE_PERF_EVENTS
+ 	select PERF_USE_VMALLOC
+ 	help
+--- a/arch/arm/boot/compressed/Makefile
++++ b/arch/arm/boot/compressed/Makefile
+@@ -65,6 +65,7 @@ SEDFLAGS	= s/TEXT_START/$(ZTEXTADDR)/;s/
+ 
+ suffix_$(CONFIG_KERNEL_GZIP) = gzip
+ suffix_$(CONFIG_KERNEL_LZO)  = lzo
++suffix_$(CONFIG_KERNEL_LZMA) = lzma
+ 
+ targets       := vmlinux vmlinux.lds \
+ 		 piggy.$(suffix_y) piggy.$(suffix_y).o \
+--- a/arch/arm/boot/compressed/decompress.c
++++ b/arch/arm/boot/compressed/decompress.c
+@@ -40,6 +40,10 @@ extern void error(char *);
+ #include "../../../../lib/decompress_unlzo.c"
+ #endif
+ 
++#ifdef CONFIG_KERNEL_LZMA
++#include "../../../../lib/decompress_unlzma.c"
++#endif
++
+ void do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x))
+ {
+ 	decompress(input, len, NULL, NULL, output, NULL, error);
+--- /dev/null
++++ b/arch/arm/boot/compressed/piggy.lzma.S
+@@ -0,0 +1,6 @@
++	.section .piggydata,#alloc
++	.globl	input_data
++input_data:
++	.incbin	"arch/arm/boot/compressed/piggy.lzma"
++	.globl	input_data_end
++input_data_end:
diff --git a/target/linux/generic/patches-2.6.34/060-block2mtd_init.patch b/target/linux/generic/patches-2.6.34/060-block2mtd_init.patch
new file mode 100644
index 0000000000..d2890c3e7f
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/060-block2mtd_init.patch
@@ -0,0 +1,120 @@
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -14,6 +14,7 @@
+ #include <linux/list.h>
+ #include <linux/init.h>
+ #include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
+ #include <linux/buffer_head.h>
+ #include <linux/mutex.h>
+ #include <linux/mount.h>
+@@ -233,10 +234,11 @@ static void block2mtd_free_device(struct
+ 
+ 
+ /* FIXME: ensure that mtd->size % erase_size == 0 */
+-static struct block2mtd_dev *add_device(char *devname, int erase_size)
++static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname)
+ {
+ 	struct block_device *bdev;
+ 	struct block2mtd_dev *dev;
++	struct mtd_partition *part;
+ 	char *name;
+ 
+ 	if (!devname)
+@@ -274,17 +276,17 @@ static struct block2mtd_dev *add_device(
+ 
+ 	mutex_init(&dev->write_mutex);
+ 
+-	/* Setup the MTD structure */
+-	/* make the name contain the block device in */
+-	name = kmalloc(sizeof("block2mtd: ") + strlen(devname) + 1,
+-			GFP_KERNEL);
++	if (!mtdname)
++		mtdname = devname;
++
++	name = kmalloc(strlen(mtdname) + 1, GFP_KERNEL);
+ 	if (!name)
+ 		goto devinit_err;
+ 
+-	sprintf(name, "block2mtd: %s", devname);
++	strcpy(name, mtdname);
+ 	dev->mtd.name = name;
+ 
+-	dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK;
++	dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK & ~(erase_size - 1);
+ 	dev->mtd.erasesize = erase_size;
+ 	dev->mtd.writesize = 1;
+ 	dev->mtd.type = MTD_RAM;
+@@ -297,14 +299,17 @@ static struct block2mtd_dev *add_device(
+ 	dev->mtd.priv = dev;
+ 	dev->mtd.owner = THIS_MODULE;
+ 
+-	if (add_mtd_device(&dev->mtd)) {
++	part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
++	part->name = dev->mtd.name;
++	part->offset = 0;
++	part->size = dev->mtd.size;
++	if (add_mtd_partitions(&dev->mtd, part, 1)) {
+ 		/* Device didnt get added, so free the entry */
+ 		goto devinit_err;
+ 	}
+ 	list_add(&dev->list, &blkmtd_device_list);
+ 	INFO("mtd%d: [%s] erase_size = %dKiB [%d]", dev->mtd.index,
+-			dev->mtd.name + strlen("block2mtd: "),
+-			dev->mtd.erasesize >> 10, dev->mtd.erasesize);
++			mtdname, dev->mtd.erasesize >> 10, dev->mtd.erasesize);
+ 	return dev;
+ 
+ devinit_err:
+@@ -377,9 +382,9 @@ static char block2mtd_paramline[80 + 12]
+ 
+ static int block2mtd_setup2(const char *val)
+ {
+-	char buf[80 + 12]; /* 80 for device, 12 for erase size */
++	char buf[80 + 12 + 80]; /* 80 for device, 12 for erase size, 80 for name */
+ 	char *str = buf;
+-	char *token[2];
++	char *token[3];
+ 	char *name;
+ 	size_t erase_size = PAGE_SIZE;
+ 	int i, ret;
+@@ -390,7 +395,7 @@ static int block2mtd_setup2(const char *
+ 	strcpy(str, val);
+ 	kill_final_newline(str);
+ 
+-	for (i = 0; i < 2; i++)
++	for (i = 0; i < 3; i++)
+ 		token[i] = strsep(&str, ",");
+ 
+ 	if (str)
+@@ -409,8 +414,10 @@ static int block2mtd_setup2(const char *
+ 			parse_err("illegal erase size");
+ 		}
+ 	}
++	if (token[2] && (strlen(token[2]) + 1 > 80))
++		parse_err("mtd device name too long");
+ 
+-	add_device(name, erase_size);
++	add_device(name, erase_size, token[2]);
+ 
+ 	return 0;
+ }
+@@ -444,7 +451,7 @@ static int block2mtd_setup(const char *v
+ 
+ 
+ module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);
+-MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>]\"");
++MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>]]\"");
+ 
+ static int __init block2mtd_init(void)
+ {
+--- a/fs/partitions/check.c
++++ b/fs/partitions/check.c
+@@ -639,6 +639,7 @@ try_scan:
+ 	kfree(state);
+ 	return 0;
+ }
++EXPORT_SYMBOL(rescan_partitions);
+ 
+ unsigned char *read_dev_sector(struct block_device *bdev, sector_t n, Sector *p)
+ {
diff --git a/target/linux/generic/patches-2.6.34/065-rootfs_split.patch b/target/linux/generic/patches-2.6.34/065-rootfs_split.patch
new file mode 100644
index 0000000000..d70d1835a3
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/065-rootfs_split.patch
@@ -0,0 +1,625 @@
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -53,6 +53,16 @@ config MTD_PARTITIONS
+ 	  devices. Partitioning on NFTL 'devices' is a different - that's the
+ 	  'normal' form of partitioning used on a block device.
+ 
++config MTD_ROOTFS_ROOT_DEV
++	bool "Automatically set 'rootfs' partition to be root filesystem"
++	depends on MTD_PARTITIONS
++	default y
++
++config MTD_ROOTFS_SPLIT
++	bool "Automatically split 'rootfs' partition for squashfs"
++	depends on MTD_PARTITIONS
++	default y
++
+ config MTD_REDBOOT_PARTS
+ 	tristate "RedBoot partition table parsing"
+ 	depends on MTD_PARTITIONS
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -18,6 +18,8 @@
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+ #include <linux/mtd/compatmac.h>
++#include <linux/root_dev.h>
++#include <linux/magic.h>
+ 
+ /* Our partition linked list */
+ static LIST_HEAD(mtd_partitions);
+@@ -35,7 +37,7 @@ struct mtd_part {
+  * the pointer to that structure with this macro.
+  */
+ #define PART(x)  ((struct mtd_part *)(x))
+-
++#define IS_PART(mtd) (mtd->read == part_read)
+ 
+ /*
+  * MTD methods which simply translate the effective address and pass through
+@@ -503,6 +505,150 @@ out_register:
+ 	return slave;
+ }
+ 
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++#define ROOTFS_SPLIT_NAME "rootfs_data"
++#define ROOTFS_REMOVED_NAME "<removed>"
++
++struct squashfs_super_block {
++	__le32 s_magic;
++	__le32 pad0[9];
++	__le64 bytes_used;
++};
++
++
++static int split_squashfs(struct mtd_info *master, int offset, int *split_offset)
++{
++	struct squashfs_super_block sb;
++	int len, ret;
++
++	ret = master->read(master, offset, sizeof(sb), &len, (void *) &sb);
++	if (ret || (len != sizeof(sb))) {
++		printk(KERN_ALERT "split_squashfs: error occured while reading "
++			"from \"%s\"\n", master->name);
++		return -EINVAL;
++	}
++
++	if (SQUASHFS_MAGIC != le32_to_cpu(sb.s_magic) ) {
++		printk(KERN_ALERT "split_squashfs: no squashfs found in \"%s\"\n",
++			master->name);
++		*split_offset = 0;
++		return 0;
++	}
++
++	if (le64_to_cpu((sb.bytes_used)) <= 0) {
++		printk(KERN_ALERT "split_squashfs: squashfs is empty in \"%s\"\n",
++			master->name);
++		*split_offset = 0;
++		return 0;
++	}
++
++	len = (u32) le64_to_cpu(sb.bytes_used);
++	len += (offset & 0x000fffff);
++	len +=  (master->erasesize - 1);
++	len &= ~(master->erasesize - 1);
++	len -= (offset & 0x000fffff);
++	*split_offset = offset + len;
++
++	return 0;
++}
++
++static int split_rootfs_data(struct mtd_info *master, struct mtd_info *rpart, const struct mtd_partition *part)
++{
++	struct mtd_partition *dpart;
++	struct mtd_part *slave = NULL;
++	int split_offset = 0;
++	int ret;
++
++	ret = split_squashfs(master, part->offset, &split_offset);
++	if (ret)
++		return ret;
++
++	if (split_offset <= 0)
++		return 0;
++
++	dpart = kmalloc(sizeof(*part)+sizeof(ROOTFS_SPLIT_NAME)+1, GFP_KERNEL);
++	if (dpart == NULL) {
++		printk(KERN_INFO "split_squashfs: no memory for partition \"%s\"\n",
++			ROOTFS_SPLIT_NAME);
++		return -ENOMEM;
++	}
++
++	memcpy(dpart, part, sizeof(*part));
++	dpart->name = (unsigned char *)&dpart[1];
++	strcpy(dpart->name, ROOTFS_SPLIT_NAME);
++
++	dpart->size -= split_offset - dpart->offset;
++	dpart->offset = split_offset;
++
++	if (dpart == NULL)
++		return 1;
++
++	printk(KERN_INFO "mtd: partition \"%s\" created automatically, ofs=%llX, len=%llX \n",
++		ROOTFS_SPLIT_NAME, dpart->offset, dpart->size);
++
++	slave = add_one_partition(master, dpart, 0, split_offset);
++	if (!slave) {
++		kfree(dpart);
++		return -ENOMEM;
++	}
++	rpart->split = &slave->mtd;
++
++	return 0;
++}
++
++static int refresh_rootfs_split(struct mtd_info *mtd)
++{
++	struct mtd_partition tpart;
++	struct mtd_part *part;
++	char *name;
++	//int index = 0;
++	int offset, size;
++	int ret;
++
++	part = PART(mtd);
++
++	/* check for the new squashfs offset first */
++	ret = split_squashfs(part->master, part->offset, &offset);
++	if (ret)
++		return ret;
++
++	if ((offset > 0) && !mtd->split) {
++		printk(KERN_INFO "%s: creating new split partition for \"%s\"\n", __func__, mtd->name);
++		/* if we don't have a rootfs split partition, create a new one */
++		tpart.name = (char *) mtd->name;
++		tpart.size = mtd->size;
++		tpart.offset = part->offset;
++
++		return split_rootfs_data(part->master, &part->mtd, &tpart);
++	} else if ((offset > 0) && mtd->split) {
++		/* update the offsets of the existing partition */
++		size = mtd->size + part->offset - offset;
++
++		part = PART(mtd->split);
++		part->offset = offset;
++		part->mtd.size = size;
++		printk(KERN_INFO "%s: %s partition \"" ROOTFS_SPLIT_NAME "\", offset: 0x%06x (0x%06x)\n",
++			__func__, (!strcmp(part->mtd.name, ROOTFS_SPLIT_NAME) ? "updating" : "creating"),
++			(u32) part->offset, (u32) part->mtd.size);
++		name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
++		strcpy(name, ROOTFS_SPLIT_NAME);
++		part->mtd.name = name;
++	} else if ((offset <= 0) && mtd->split) {
++		printk(KERN_INFO "%s: removing partition \"%s\"\n", __func__, mtd->split->name);
++
++		/* mark existing partition as removed */
++		part = PART(mtd->split);
++		name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
++		strcpy(name, ROOTFS_REMOVED_NAME);
++		part->mtd.name = name;
++		part->offset = 0;
++		part->mtd.size = 0;
++	}
++
++	return 0;
++}
++#endif /* CONFIG_MTD_ROOTFS_SPLIT */
++
+ /*
+  * This function, given a master MTD object and a partition table, creates
+  * and registers slave MTD objects which are bound to the master according to
+@@ -518,7 +664,7 @@ int add_mtd_partitions(struct mtd_info *
+ {
+ 	struct mtd_part *slave;
+ 	uint64_t cur_offset = 0;
+-	int i;
++	int i, ret;
+ 
+ 	printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
+ 
+@@ -526,6 +672,21 @@ int add_mtd_partitions(struct mtd_info *
+ 		slave = add_one_partition(master, parts + i, i, cur_offset);
+ 		if (!slave)
+ 			return -ENOMEM;
++
++		if (!strcmp(parts[i].name, "rootfs")) {
++#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
++			if (ROOT_DEV == 0) {
++				printk(KERN_NOTICE "mtd: partition \"rootfs\" "
++					"set to be root filesystem\n");
++				ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, slave->mtd.index);
++			}
++#endif
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++			ret = split_rootfs_data(master, &slave->mtd, &parts[i]);
++			/* if (ret == 0)
++				j++; */
++#endif
++		}
+ 		cur_offset = slave->offset + slave->mtd.size;
+ 	}
+ 
+@@ -533,6 +694,32 @@ int add_mtd_partitions(struct mtd_info *
+ }
+ EXPORT_SYMBOL(add_mtd_partitions);
+ 
++int refresh_mtd_partitions(struct mtd_info *mtd)
++{
++	int ret = 0;
++
++	if (IS_PART(mtd)) {
++		struct mtd_part *part;
++		struct mtd_info *master;
++
++		part = PART(mtd);
++		master = part->master;
++		if (master->refresh_device)
++			ret = master->refresh_device(master);
++	}
++
++	if (!ret && mtd->refresh_device)
++		ret = mtd->refresh_device(mtd);
++
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++	if (!ret && IS_PART(mtd) && !strcmp(mtd->name, "rootfs"))
++		refresh_rootfs_split(mtd);
++#endif
++
++	return 0;
++}
++EXPORT_SYMBOL_GPL(refresh_mtd_partitions);
++
+ static DEFINE_SPINLOCK(part_parser_lock);
+ static LIST_HEAD(part_parsers);
+ 
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -30,6 +30,8 @@ struct block2mtd_dev {
+ 	struct block_device *blkdev;
+ 	struct mtd_info mtd;
+ 	struct mutex write_mutex;
++	rwlock_t bdev_mutex;
++	char devname[0];
+ };
+ 
+ 
+@@ -82,6 +84,12 @@ static int block2mtd_erase(struct mtd_in
+ 	size_t len = instr->len;
+ 	int err;
+ 
++	read_lock(&dev->bdev_mutex);
++	if (!dev->blkdev) {
++		err = -EINVAL;
++		goto done;
++	}
++
+ 	instr->state = MTD_ERASING;
+ 	mutex_lock(&dev->write_mutex);
+ 	err = _block2mtd_erase(dev, from, len);
+@@ -94,6 +102,10 @@ static int block2mtd_erase(struct mtd_in
+ 
+ 	instr->state = MTD_ERASE_DONE;
+ 	mtd_erase_callback(instr);
++
++done:
++	read_unlock(&dev->bdev_mutex);
++
+ 	return err;
+ }
+ 
+@@ -105,10 +117,14 @@ static int block2mtd_read(struct mtd_inf
+ 	struct page *page;
+ 	int index = from >> PAGE_SHIFT;
+ 	int offset = from & (PAGE_SIZE-1);
+-	int cpylen;
++	int cpylen, err = 0;
++
++	read_lock(&dev->bdev_mutex);
++	if (!dev->blkdev || (from > mtd->size)) {
++		err = -EINVAL;
++		goto done;
++	}
+ 
+-	if (from > mtd->size)
+-		return -EINVAL;
+ 	if (from + len > mtd->size)
+ 		len = mtd->size - from;
+ 
+@@ -123,10 +139,14 @@ static int block2mtd_read(struct mtd_inf
+ 		len = len - cpylen;
+ 
+ 		page = page_read(dev->blkdev->bd_inode->i_mapping, index);
+-		if (!page)
+-			return -ENOMEM;
+-		if (IS_ERR(page))
+-			return PTR_ERR(page);
++		if (!page) {
++			err = -ENOMEM;
++			goto done;
++		}
++		if (IS_ERR(page)) {
++			err = PTR_ERR(page);
++			goto done;
++		}
+ 
+ 		memcpy(buf, page_address(page) + offset, cpylen);
+ 		page_cache_release(page);
+@@ -137,7 +157,10 @@ static int block2mtd_read(struct mtd_inf
+ 		offset = 0;
+ 		index++;
+ 	}
+-	return 0;
++
++done:
++	read_unlock(&dev->bdev_mutex);
++	return err;
+ }
+ 
+ 
+@@ -189,12 +212,22 @@ static int block2mtd_write(struct mtd_in
+ 		size_t *retlen, const u_char *buf)
+ {
+ 	struct block2mtd_dev *dev = mtd->priv;
+-	int err;
++	int err = 0;
++
++	read_lock(&dev->bdev_mutex);
++	if (!dev->blkdev) {
++		err = -EINVAL;
++		goto done;
++	}
+ 
+ 	if (!len)
+-		return 0;
+-	if (to >= mtd->size)
+-		return -ENOSPC;
++		goto done;
++
++	if (to >= mtd->size) {
++		err = -ENOSPC;
++		goto done;
++	}
++
+ 	if (to + len > mtd->size)
+ 		len = mtd->size - to;
+ 
+@@ -203,6 +236,9 @@ static int block2mtd_write(struct mtd_in
+ 	mutex_unlock(&dev->write_mutex);
+ 	if (err > 0)
+ 		err = 0;
++
++done:
++	read_unlock(&dev->bdev_mutex);
+ 	return err;
+ }
+ 
+@@ -211,52 +247,29 @@ static int block2mtd_write(struct mtd_in
+ static void block2mtd_sync(struct mtd_info *mtd)
+ {
+ 	struct block2mtd_dev *dev = mtd->priv;
+-	sync_blockdev(dev->blkdev);
+-	return;
+-}
+-
+-
+-static void block2mtd_free_device(struct block2mtd_dev *dev)
+-{
+-	if (!dev)
+-		return;
+-
+-	kfree(dev->mtd.name);
+ 
+-	if (dev->blkdev) {
+-		invalidate_mapping_pages(dev->blkdev->bd_inode->i_mapping,
+-					0, -1);
+-		close_bdev_exclusive(dev->blkdev, FMODE_READ|FMODE_WRITE);
+-	}
++	read_lock(&dev->bdev_mutex);
++	if (dev->blkdev)
++		sync_blockdev(dev->blkdev);
++	read_unlock(&dev->bdev_mutex);
+ 
+-	kfree(dev);
++	return;
+ }
+ 
+ 
+-/* FIXME: ensure that mtd->size % erase_size == 0 */
+-static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname)
++static int _open_bdev(struct block2mtd_dev *dev)
+ {
+ 	struct block_device *bdev;
+-	struct block2mtd_dev *dev;
+-	struct mtd_partition *part;
+-	char *name;
+-
+-	if (!devname)
+-		return NULL;
+-
+-	dev = kzalloc(sizeof(struct block2mtd_dev), GFP_KERNEL);
+-	if (!dev)
+-		return NULL;
+ 
+ 	/* Get a handle on the device */
+-	bdev = open_bdev_exclusive(devname, FMODE_READ|FMODE_WRITE, NULL);
++	bdev = open_bdev_exclusive(dev->devname, FMODE_READ|FMODE_WRITE, NULL);
+ #ifndef MODULE
+ 	if (IS_ERR(bdev)) {
+ 
+ 		/* We might not have rootfs mounted at this point. Try
+ 		   to resolve the device name by other means. */
+ 
+-		dev_t devt = name_to_dev_t(devname);
++		dev_t devt = name_to_dev_t(dev->devname);
+ 		if (devt) {
+ 			bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);
+ 		}
+@@ -264,17 +277,98 @@ static struct block2mtd_dev *add_device(
+ #endif
+ 
+ 	if (IS_ERR(bdev)) {
+-		ERROR("error: cannot open device %s", devname);
+-		goto devinit_err;
++		ERROR("error: cannot open device %s", dev->devname);
++		return 1;
+ 	}
+ 	dev->blkdev = bdev;
+ 
+ 	if (MAJOR(bdev->bd_dev) == MTD_BLOCK_MAJOR) {
+ 		ERROR("attempting to use an MTD device as a block device");
+-		goto devinit_err;
++		return 1;
+ 	}
+ 
++	return 0;
++}
++
++static void _close_bdev(struct block2mtd_dev *dev)
++{
++	struct block_device *bdev;
++
++	if (!dev->blkdev)
++		return;
++
++	bdev = dev->blkdev;
++	invalidate_mapping_pages(dev->blkdev->bd_inode->i_mapping, 0, -1);
++	close_bdev_exclusive(dev->blkdev, FMODE_READ|FMODE_WRITE);
++	dev->blkdev = NULL;
++}
++
++static void block2mtd_free_device(struct block2mtd_dev *dev)
++{
++	if (!dev)
++		return;
++
++	kfree(dev->mtd.name);
++	_close_bdev(dev);
++	kfree(dev);
++}
++
++
++static int block2mtd_refresh(struct mtd_info *mtd)
++{
++	struct block2mtd_dev *dev = mtd->priv;
++	struct block_device *bdev;
++	dev_t devt;
++	int err = 0;
++
++	/* no other mtd function can run at this point */
++	write_lock(&dev->bdev_mutex);
++
++	/* get the device number for the whole disk */
++	devt = MKDEV(MAJOR(dev->blkdev->bd_dev), 0);
++
++	/* close the old block device */
++	_close_bdev(dev);
++
++	/* open the whole disk, issue a partition rescan, then */
++	bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);
++	if (!bdev || !bdev->bd_disk)
++		err = -EINVAL;
++#ifndef CONFIG_MTD_BLOCK2MTD_MODULE
++	else
++		err = rescan_partitions(bdev->bd_disk, bdev);
++#endif
++	if (bdev)
++		close_bdev_exclusive(bdev, FMODE_READ|FMODE_WRITE);
++
++	/* try to open the partition block device again */
++	_open_bdev(dev);
++	write_unlock(&dev->bdev_mutex);
++
++	return err;
++}
++
++/* FIXME: ensure that mtd->size % erase_size == 0 */
++static struct block2mtd_dev *add_device(char *devname, int erase_size, char *mtdname)
++{
++	struct block2mtd_dev *dev;
++	struct mtd_partition *part;
++	char *name;
++
++	if (!devname)
++		return NULL;
++
++	dev = kzalloc(sizeof(struct block2mtd_dev) + strlen(devname) + 1, GFP_KERNEL);
++	if (!dev)
++		return NULL;
++
++	strcpy(dev->devname, devname);
++
++	if (_open_bdev(dev))
++		goto devinit_err;
++
+ 	mutex_init(&dev->write_mutex);
++	rwlock_init(&dev->bdev_mutex);
+ 
+ 	if (!mtdname)
+ 		mtdname = devname;
+@@ -298,6 +392,7 @@ static struct block2mtd_dev *add_device(
+ 	dev->mtd.read = block2mtd_read;
+ 	dev->mtd.priv = dev;
+ 	dev->mtd.owner = THIS_MODULE;
++	dev->mtd.refresh_device = block2mtd_refresh;
+ 
+ 	part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
+ 	part->name = dev->mtd.name;
+--- a/drivers/mtd/mtdchar.c
++++ b/drivers/mtd/mtdchar.c
+@@ -18,6 +18,7 @@
+ 
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/compatmac.h>
++#include <linux/mtd/partitions.h>
+ 
+ #include <asm/uaccess.h>
+ 
+@@ -814,6 +815,13 @@ static int mtd_ioctl(struct inode *inode
+ 		file->f_pos = 0;
+ 		break;
+ 	}
++#ifdef CONFIG_MTD_PARTITIONS
++	case MTDREFRESH:
++	{
++		ret = refresh_mtd_partitions(mtd);
++		break;
++	}
++#endif
+ 
+ 	default:
+ 		ret = -ENOTTY;
+--- a/include/linux/mtd/mtd.h
++++ b/include/linux/mtd/mtd.h
+@@ -101,6 +101,7 @@ struct mtd_oob_ops {
+ 	uint8_t		*oobbuf;
+ };
+ 
++struct mtd_info;
+ struct mtd_info {
+ 	u_char type;
+ 	uint32_t flags;
+@@ -241,6 +242,9 @@ struct mtd_info {
+ 	struct device dev;
+ 	int usecount;
+ 
++	int (*refresh_device)(struct mtd_info *mtd);
++	struct mtd_info *split;
++
+ 	/* If the driver is something smart, like UBI, it may need to maintain
+ 	 * its own reference counting. The below functions are only for driver.
+ 	 * The driver may register its callbacks. These callbacks are not
+--- a/include/linux/mtd/partitions.h
++++ b/include/linux/mtd/partitions.h
+@@ -34,12 +34,14 @@
+  * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK).
+  */
+ 
++struct mtd_partition;
+ struct mtd_partition {
+ 	char *name;			/* identifier string */
+ 	uint64_t size;			/* partition size */
+ 	uint64_t offset;		/* offset within the master MTD space */
+ 	uint32_t mask_flags;		/* master MTD flags to mask out for this partition */
+ 	struct nand_ecclayout *ecclayout;	/* out of band layout for this partition (NAND only)*/
++	int (*refresh_partition)(struct mtd_info *);
+ };
+ 
+ #define MTDPART_OFS_NXTBLK	(-2)
+@@ -51,6 +53,7 @@ struct mtd_info;
+ 
+ int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
+ int del_mtd_partitions(struct mtd_info *);
++int refresh_mtd_partitions(struct mtd_info *);
+ 
+ /*
+  * Functions dealing with the various ways of partitioning the space
+--- a/include/mtd/mtd-abi.h
++++ b/include/mtd/mtd-abi.h
+@@ -110,6 +110,7 @@ struct otp_info {
+ #define MEMERASE64		_IOW('M', 20, struct erase_info_user64)
+ #define MEMWRITEOOB64		_IOWR('M', 21, struct mtd_oob_buf64)
+ #define MEMREADOOB64		_IOWR('M', 22, struct mtd_oob_buf64)
++#define MTDREFRESH		_IO('M', 23)
+ 
+ /*
+  * Obsolete legacy interface. Keep it in order not to break userspace
diff --git a/target/linux/generic/patches-2.6.34/066-block2mtd_probe.patch b/target/linux/generic/patches-2.6.34/066-block2mtd_probe.patch
new file mode 100644
index 0000000000..4cc7ef517c
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/066-block2mtd_probe.patch
@@ -0,0 +1,10 @@
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -269,6 +269,7 @@ static int _open_bdev(struct block2mtd_d
+ 		/* We might not have rootfs mounted at this point. Try
+ 		   to resolve the device name by other means. */
+ 
++		wait_for_device_probe();
+ 		dev_t devt = name_to_dev_t(dev->devname);
+ 		if (devt) {
+ 			bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);
diff --git a/target/linux/generic/patches-2.6.34/070-redboot_space.patch b/target/linux/generic/patches-2.6.34/070-redboot_space.patch
new file mode 100644
index 0000000000..6ace83c01a
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/070-redboot_space.patch
@@ -0,0 +1,30 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -249,14 +249,21 @@ static int parse_redboot_partitions(stru
+ #endif
+ 		names += strlen(names)+1;
+ 
+-#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+ 		if(fl->next && fl->img->flash_base + fl->img->size + master->erasesize <= fl->next->img->flash_base) {
+-			i++;
+-			parts[i].offset = parts[i-1].size + parts[i-1].offset;
+-			parts[i].size = fl->next->img->flash_base - parts[i].offset;
+-			parts[i].name = nullname;
+-		}
++			if (!strcmp(parts[i].name, "rootfs")) {
++				parts[i].size = fl->next->img->flash_base;
++				parts[i].size &= ~(master->erasesize - 1);
++				parts[i].size -= parts[i].offset;
++#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
++				nrparts--;
++			} else {
++				i++;
++				parts[i].offset = parts[i-1].size + parts[i-1].offset;
++				parts[i].size = fl->next->img->flash_base - parts[i].offset;
++				parts[i].name = nullname;
+ #endif
++			}
++		}
+ 		tmp_fl = fl;
+ 		fl = fl->next;
+ 		kfree(tmp_fl);
diff --git a/target/linux/generic/patches-2.6.34/071-redboot_boardconfig.patch b/target/linux/generic/patches-2.6.34/071-redboot_boardconfig.patch
new file mode 100644
index 0000000000..f9bc4fe36b
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/071-redboot_boardconfig.patch
@@ -0,0 +1,60 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -11,6 +11,8 @@
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+ 
++#define BOARD_CONFIG_PART		"boardconfig"
++
+ struct fis_image_desc {
+     unsigned char name[16];      // Null terminated name
+     uint32_t	  flash_base;    // Address within FLASH of image
+@@ -41,6 +43,7 @@ static int parse_redboot_partitions(stru
+                              struct mtd_partition **pparts,
+                              unsigned long fis_origin)
+ {
++	unsigned long max_offset = 0;
+ 	int nrparts = 0;
+ 	struct fis_image_desc *buf;
+ 	struct mtd_partition *parts;
+@@ -209,14 +212,14 @@ static int parse_redboot_partitions(stru
+ 		}
+ 	}
+ #endif
+-	parts = kzalloc(sizeof(*parts)*nrparts + nulllen + namelen, GFP_KERNEL);
++	parts = kzalloc(sizeof(*parts) * (nrparts + 1) + nulllen + namelen + sizeof(BOARD_CONFIG_PART), GFP_KERNEL);
+ 
+ 	if (!parts) {
+ 		ret = -ENOMEM;
+ 		goto out;
+ 	}
+ 
+-	nullname = (char *)&parts[nrparts];
++	nullname = (char *)&parts[nrparts + 1];
+ #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+ 	if (nulllen > 0) {
+ 		strcpy(nullname, nullstring);
+@@ -235,6 +238,8 @@ static int parse_redboot_partitions(stru
+ 	}
+ #endif
+ 	for ( ; i<nrparts; i++) {
++		if(max_offset < buf[i].flash_base + buf[i].size)
++			max_offset = buf[i].flash_base + buf[i].size;
+ 		parts[i].size = fl->img->size;
+ 		parts[i].offset = fl->img->flash_base;
+ 		parts[i].name = names;
+@@ -268,6 +273,14 @@ static int parse_redboot_partitions(stru
+ 		fl = fl->next;
+ 		kfree(tmp_fl);
+ 	}
++	if(master->size - max_offset >= master->erasesize)
++	{
++		parts[nrparts].size = master->size - max_offset;
++		parts[nrparts].offset = max_offset;
++		parts[nrparts].name = names;
++		strcpy(names, BOARD_CONFIG_PART);
++		nrparts++;
++	}
+ 	ret = nrparts;
+ 	*pparts = parts;
+  out:
diff --git a/target/linux/generic/patches-2.6.34/080-mtd_plat_nand_chip_fixup.patch b/target/linux/generic/patches-2.6.34/080-mtd_plat_nand_chip_fixup.patch
new file mode 100644
index 0000000000..16ce76ce8c
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/080-mtd_plat_nand_chip_fixup.patch
@@ -0,0 +1,32 @@
+--- a/include/linux/mtd/nand.h
++++ b/include/linux/mtd/nand.h
+@@ -491,6 +491,7 @@ struct platform_nand_chip {
+ 	int			chip_delay;
+ 	unsigned int		options;
+ 	const char		**part_probe_types;
++	int			(*chip_fixup)(struct mtd_info *mtd);
+ 	void			(*set_parts)(uint64_t size,
+ 					struct platform_nand_chip *chip);
+ 	void			*priv;
+--- a/drivers/mtd/nand/plat_nand.c
++++ b/drivers/mtd/nand/plat_nand.c
+@@ -91,7 +91,18 @@ static int __devinit plat_nand_probe(str
+ 	}
+ 
+ 	/* Scan to find existance of the device */
+-	if (nand_scan(&data->mtd, 1)) {
++	if (nand_scan_ident(&data->mtd, 1)) {
++		res = -ENXIO;
++		goto out;
++	}
++
++	if (pdata->chip.chip_fixup) {
++		res = pdata->chip.chip_fixup(&data->mtd);
++		if (res)
++			goto out;
++	}
++
++	if (nand_scan_tail(&data->mtd)) {
+ 		err = -ENXIO;
+ 		goto out;
+ 	}
diff --git a/target/linux/generic/patches-2.6.34/081-mtd_myloader_partition_parser.patch b/target/linux/generic/patches-2.6.34/081-mtd_myloader_partition_parser.patch
new file mode 100644
index 0000000000..61b822ee88
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/081-mtd_myloader_partition_parser.patch
@@ -0,0 +1,35 @@
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -181,6 +181,22 @@ config MTD_AR7_PARTS
+ 	---help---
+ 	  TI AR7 partitioning support
+ 
++config MTD_MYLOADER_PARTS
++	tristate "MyLoader partition parsing"
++	depends on MTD_PARTITIONS && (ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX)
++	---help---
++	  MyLoader is a bootloader which allows the user to define partitions
++	  in flash devices, by putting a table in the second erase block
++	  on the device, similar to a partition table. This table gives the 
++	  offsets and lengths of the user defined partitions.
++
++	  If you need code which can detect and parse these tables, and
++	  register MTD 'partitions' corresponding to each image detected,
++	  enable this option.
++
++	  You will still need the parsing functions to be called by the driver
++	  for your particular device. It won't happen automatically.
++
+ comment "User Modules And Translation Layers"
+ 
+ config MTD_CHAR
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdli
+ obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
+ obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
+ obj-$(CONFIG_MTD_OF_PARTS)      += ofpart.o
++obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+ 
+ # 'Users' - code which presents functionality to userspace.
+ obj-$(CONFIG_MTD_CHAR)		+= mtdchar.o
diff --git a/target/linux/generic/patches-2.6.34/082-mtd_info_move_forward_decl.patch b/target/linux/generic/patches-2.6.34/082-mtd_info_move_forward_decl.patch
new file mode 100644
index 0000000000..13f0a217d4
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/082-mtd_info_move_forward_decl.patch
@@ -0,0 +1,18 @@
+--- a/include/linux/mtd/partitions.h
++++ b/include/linux/mtd/partitions.h
+@@ -33,6 +33,7 @@
+  * Note: writeable partitions require their size and offset be
+  * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK).
+  */
++struct mtd_info;
+ 
+ struct mtd_partition;
+ struct mtd_partition {
+@@ -49,7 +50,6 @@ struct mtd_partition {
+ #define MTDPART_SIZ_FULL	(0)
+ 
+ 
+-struct mtd_info;
+ 
+ int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
+ int del_mtd_partitions(struct mtd_info *);
diff --git a/target/linux/generic/patches-2.6.34/083-mtd_fix_nand_correct_data_return_code.patch b/target/linux/generic/patches-2.6.34/083-mtd_fix_nand_correct_data_return_code.patch
new file mode 100644
index 0000000000..f630059e87
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/083-mtd_fix_nand_correct_data_return_code.patch
@@ -0,0 +1,12 @@
+--- a/drivers/mtd/nand/nand_ecc.c
++++ b/drivers/mtd/nand/nand_ecc.c
+@@ -507,8 +507,7 @@ int __nand_correct_data(unsigned char *b
+ 	if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1)
+ 		return 1;	/* error in ecc data; no action needed */
+ 
+-	printk(KERN_ERR "uncorrectable error : ");
+-	return -1;
++	return -EBADMSG;
+ }
+ EXPORT_SYMBOL(__nand_correct_data);
+ 
diff --git a/target/linux/generic/patches-2.6.34/084-mtd_m25p80_add_pm25lv_flash_support.patch b/target/linux/generic/patches-2.6.34/084-mtd_m25p80_add_pm25lv_flash_support.patch
new file mode 100644
index 0000000000..96a5bd0132
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/084-mtd_m25p80_add_pm25lv_flash_support.patch
@@ -0,0 +1,13 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -646,6 +646,10 @@ static const struct spi_device_id m25p_i
+ 	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
+ 	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
+ 
++	/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
++	{ "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K) },
++	{ "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K) },
++
+ 	/* Spansion -- single (large) sector size only, at least
+ 	 * for the chips listed here (without boot sectors).
+ 	 */
diff --git a/target/linux/generic/patches-2.6.34/085-mtd_m25p80_add_en25pxx_support.patch b/target/linux/generic/patches-2.6.34/085-mtd_m25p80_add_en25pxx_support.patch
new file mode 100644
index 0000000000..9235e6ee16
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/085-mtd_m25p80_add_en25pxx_support.patch
@@ -0,0 +1,13 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -646,6 +646,10 @@ static const struct spi_device_id m25p_i
+ 	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
+ 	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
+ 
++	/* EON -- en25pxx */
++	{ "en25p32", INFO(0x1c2016, 0, 64 * 1024,  64, 0) },
++	{ "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
++
+ 	/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
+ 	{ "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K) },
+ 	{ "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K) },
diff --git a/target/linux/generic/patches-2.6.34/086-mtd_m25p80_add_xxxs33b_support.patch b/target/linux/generic/patches-2.6.34/086-mtd_m25p80_add_xxxs33b_support.patch
new file mode 100644
index 0000000000..293ed8bdb6
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/086-mtd_m25p80_add_xxxs33b_support.patch
@@ -0,0 +1,28 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -650,6 +650,11 @@ static const struct spi_device_id m25p_i
+ 	{ "en25p32", INFO(0x1c2016, 0, 64 * 1024,  64, 0) },
+ 	{ "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
+ 
++	/* Numonyx -- xxxs33b */
++	{ "160s33b",  INFO(0x898911, 0, 64 * 1024,  64, 0) },
++	{ "320s33b",  INFO(0x898912, 0, 64 * 1024, 128, 0) },
++	{ "640s33b",  INFO(0x898913, 0, 64 * 1024, 256, 0) },
++
+ 	/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
+ 	{ "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K) },
+ 	{ "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K) },
+@@ -834,11 +839,12 @@ static int __devinit m25p_probe(struct s
+ 	dev_set_drvdata(&spi->dev, flash);
+ 
+ 	/*
+-	 * Atmel and SST serial flash tend to power
++	 * Atmel, SST and Intel/Numonyx serial flash tend to power
+ 	 * up with the software protection bits set
+ 	 */
+ 
+ 	if (info->jedec_id >> 16 == 0x1f ||
++	    info->jedec_id >> 16 == 0x89 ||
+ 	    info->jedec_id >> 16 == 0xbf) {
+ 		write_enable(flash);
+ 		write_sr(flash, 0);
diff --git a/target/linux/generic/patches-2.6.34/087-mtd-m25p80-add-w25q32-chip-support.patch b/target/linux/generic/patches-2.6.34/087-mtd-m25p80-add-w25q32-chip-support.patch
new file mode 100644
index 0000000000..34dfdbd894
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/087-mtd-m25p80-add-w25q32-chip-support.patch
@@ -0,0 +1,10 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -707,6 +707,7 @@ static const struct spi_device_id m25p_i
+ 	{ "w25x80", INFO(0xef3014, 0, 64 * 1024,  16, SECT_4K) },
+ 	{ "w25x16", INFO(0xef3015, 0, 64 * 1024,  32, SECT_4K) },
+ 	{ "w25x32", INFO(0xef3016, 0, 64 * 1024,  64, SECT_4K) },
++	{ "w25q32", INFO(0xef4016, 0, 64 * 1024,  64, SECT_4K) },
+ 	{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
+ 
+ 	/* Catalyst / On Semiconductor -- non-JEDEC */
diff --git a/target/linux/generic/patches-2.6.34/088-winbond_cmdset.patch b/target/linux/generic/patches-2.6.34/088-winbond_cmdset.patch
new file mode 100644
index 0000000000..d5889ce62d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/088-winbond_cmdset.patch
@@ -0,0 +1,10 @@
+--- a/drivers/mtd/chips/gen_probe.c
++++ b/drivers/mtd/chips/gen_probe.c
+@@ -249,6 +249,7 @@ static struct mtd_info *check_cmd_set(st
+ #endif
+ #ifdef CONFIG_MTD_CFI_AMDSTD
+ 	case 0x0002:
++	case 0x0006:
+ 		return cfi_cmdset_0002(map, primary);
+ #endif
+ #ifdef CONFIG_MTD_CFI_STAA
diff --git a/target/linux/generic/patches-2.6.34/089-mtd-samsung-flash.patch b/target/linux/generic/patches-2.6.34/089-mtd-samsung-flash.patch
new file mode 100644
index 0000000000..46923358b3
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/089-mtd-samsung-flash.patch
@@ -0,0 +1,37 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -327,9 +327,32 @@ static void cfi_fixup_major_minor(struct
+ {
+ 	// manufacturers defined in include/linux/mtd/cfi.h
+ 
+-	if (cfi->mfr == CFI_MFR_SAMSUNG && cfi->id == 0x257e &&
+-	    extp->MajorVersion == '0')
++	if (cfi->mfr == CFI_MFR_SAMSUNG &&
++	    extp->MajorVersion == '0') {
++		printk("  Fixed Samsung's Amd/Fujitsu Extended Query version from %c.%c",
++		       extp->MajorVersion, extp->MinorVersion);
++
+ 		extp->MajorVersion = '1';
++		extp->MinorVersion = '0';
++
++		printk(" to %c.%c.\n",
++		       extp->MajorVersion, extp->MinorVersion);
++	}
++
++	if (cfi->mfr == CFI_MFR_SAMSUNG &&
++	    extp->MajorVersion == '3' && extp->MinorVersion == '3') {
++		printk(KERN_NOTICE "  Newer Samsung flash detected, "
++		       "should be compatibile with Amd/Fujitsu.\n");
++
++		printk("  Fixed Samsung's Amd/Fujitsu Extended Query version from %c.%c",
++		       extp->MajorVersion, extp->MinorVersion);
++
++		extp->MajorVersion = '1';	// set to 1.3 (last defined version)
++		extp->MinorVersion = '3';
++
++		printk(" to %c.%c.\n",
++		       extp->MajorVersion, extp->MinorVersion);
++	}
+ }
+ 
+ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)
diff --git a/target/linux/generic/patches-2.6.34/100-netfilter_layer7_2.21.patch b/target/linux/generic/patches-2.6.34/100-netfilter_layer7_2.21.patch
new file mode 100644
index 0000000000..a19ff620cb
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/100-netfilter_layer7_2.21.patch
@@ -0,0 +1,2132 @@
+--- /dev/null
++++ b/include/linux/netfilter/xt_layer7.h
+@@ -0,0 +1,13 @@
++#ifndef _XT_LAYER7_H
++#define _XT_LAYER7_H
++
++#define MAX_PATTERN_LEN 8192
++#define MAX_PROTOCOL_LEN 256
++
++struct xt_layer7_info {
++    char protocol[MAX_PROTOCOL_LEN];
++    char pattern[MAX_PATTERN_LEN];
++    u_int8_t invert;
++};
++
++#endif /* _XT_LAYER7_H */
+--- a/include/net/netfilter/nf_conntrack.h
++++ b/include/net/netfilter/nf_conntrack.h
+@@ -116,6 +116,22 @@ struct nf_conn {
+ 	u_int32_t secmark;
+ #endif
+ 
++#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || \
++    defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++	struct {
++		/*
++		 * e.g. "http". NULL before decision. "unknown" after decision
++		 * if no match.
++		 */
++		char *app_proto;
++		/*
++		 * application layer data so far. NULL after match decision.
++		 */
++		char *app_data;
++		unsigned int app_data_len;
++	} layer7;
++#endif
++
+ 	/* Storage reserved for other modules: */
+ 	union nf_conntrack_proto proto;
+ 
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -883,6 +883,27 @@ config NETFILTER_XT_MATCH_STATE
+ 
+ 	  To compile it as a module, choose M here.  If unsure, say N.
+ 
++config NETFILTER_XT_MATCH_LAYER7
++	tristate '"layer7" match support'
++	depends on NETFILTER_XTABLES
++	depends on EXPERIMENTAL && (IP_NF_CONNTRACK || NF_CONNTRACK)
++       depends on NF_CT_ACCT
++	help
++	  Say Y if you want to be able to classify connections (and their
++	  packets) based on regular expression matching of their application
++	  layer data.   This is one way to classify applications such as
++	  peer-to-peer filesharing systems that do not always use the same
++	  port.
++
++	  To compile it as a module, choose M here.  If unsure, say N.
++
++config NETFILTER_XT_MATCH_LAYER7_DEBUG
++        bool 'Layer 7 debugging output'
++        depends on NETFILTER_XT_MATCH_LAYER7
++        help
++          Say Y to get lots of debugging output.
++
++
+ config NETFILTER_XT_MATCH_STATISTIC
+ 	tristate '"statistic" match support'
+ 	depends on NETFILTER_ADVANCED
+--- a/net/netfilter/Makefile
++++ b/net/netfilter/Makefile
+@@ -90,6 +90,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_RECENT)
+ obj-$(CONFIG_NETFILTER_XT_MATCH_SCTP) += xt_sctp.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_SOCKET) += xt_socket.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STATE) += xt_state.o
++obj-$(CONFIG_NETFILTER_XT_MATCH_LAYER7) += xt_layer7.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STATISTIC) += xt_statistic.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STRING) += xt_string.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_TCPMSS) += xt_tcpmss.o
+--- a/net/netfilter/nf_conntrack_core.c
++++ b/net/netfilter/nf_conntrack_core.c
+@@ -202,6 +202,14 @@ destroy_conntrack(struct nf_conntrack *n
+ 	 * too. */
+ 	nf_ct_remove_expectations(ct);
+ 
++	#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++	if(ct->layer7.app_proto)
++		kfree(ct->layer7.app_proto);
++	if(ct->layer7.app_data)
++	kfree(ct->layer7.app_data);
++	#endif
++
++
+ 	/* We overload first tuple to link into unconfirmed list. */
+ 	if (!nf_ct_is_confirmed(ct)) {
+ 		BUG_ON(hlist_nulls_unhashed(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode));
+--- a/net/netfilter/nf_conntrack_standalone.c
++++ b/net/netfilter/nf_conntrack_standalone.c
+@@ -178,6 +178,12 @@ static int ct_seq_show(struct seq_file *
+ 		goto release;
+ #endif
+ 
++#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++	if(ct->layer7.app_proto &&
++           seq_printf(s, "l7proto=%s ", ct->layer7.app_proto))
++		return -ENOSPC;
++#endif
++
+ 	if (seq_printf(s, "use=%u\n", atomic_read(&ct->ct_general.use)))
+ 		goto release;
+ 
+--- /dev/null
++++ b/net/netfilter/regexp/regexp.c
+@@ -0,0 +1,1197 @@
++/*
++ * regcomp and regexec -- regsub and regerror are elsewhere
++ * @(#)regexp.c	1.3 of 18 April 87
++ *
++ *	Copyright (c) 1986 by University of Toronto.
++ *	Written by Henry Spencer.  Not derived from licensed software.
++ *
++ *	Permission is granted to anyone to use this software for any
++ *	purpose on any computer system, and to redistribute it freely,
++ *	subject to the following restrictions:
++ *
++ *	1. The author is not responsible for the consequences of use of
++ *		this software, no matter how awful, even if they arise
++ *		from defects in it.
++ *
++ *	2. The origin of this software must not be misrepresented, either
++ *		by explicit claim or by omission.
++ *
++ *	3. Altered versions must be plainly marked as such, and must not
++ *		be misrepresented as being the original software.
++ *
++ * Beware that some of this code is subtly aware of the way operator
++ * precedence is structured in regular expressions.  Serious changes in
++ * regular-expression syntax might require a total rethink.
++ *
++ * This code was modified by Ethan Sommer to work within the kernel
++ * (it now uses kmalloc etc..)
++ *
++ * Modified slightly by Matthew Strait to use more modern C.
++ */
++
++#include "regexp.h"
++#include "regmagic.h"
++
++/* added by ethan and matt.  Lets it work in both kernel and user space.
++(So iptables can use it, for instance.)  Yea, it goes both ways... */
++#if __KERNEL__
++  #define malloc(foo) kmalloc(foo,GFP_ATOMIC)
++#else
++  #define printk(format,args...) printf(format,##args)
++#endif
++
++void regerror(char * s)
++{
++        printk("<3>Regexp: %s\n", s);
++        /* NOTREACHED */
++}
++
++/*
++ * The "internal use only" fields in regexp.h are present to pass info from
++ * compile to execute that permits the execute phase to run lots faster on
++ * simple cases.  They are:
++ *
++ * regstart	char that must begin a match; '\0' if none obvious
++ * reganch	is the match anchored (at beginning-of-line only)?
++ * regmust	string (pointer into program) that match must include, or NULL
++ * regmlen	length of regmust string
++ *
++ * Regstart and reganch permit very fast decisions on suitable starting points
++ * for a match, cutting down the work a lot.  Regmust permits fast rejection
++ * of lines that cannot possibly match.  The regmust tests are costly enough
++ * that regcomp() supplies a regmust only if the r.e. contains something
++ * potentially expensive (at present, the only such thing detected is * or +
++ * at the start of the r.e., which can involve a lot of backup).  Regmlen is
++ * supplied because the test in regexec() needs it and regcomp() is computing
++ * it anyway.
++ */
++
++/*
++ * Structure for regexp "program".  This is essentially a linear encoding
++ * of a nondeterministic finite-state machine (aka syntax charts or
++ * "railroad normal form" in parsing technology).  Each node is an opcode
++ * plus a "next" pointer, possibly plus an operand.  "Next" pointers of
++ * all nodes except BRANCH implement concatenation; a "next" pointer with
++ * a BRANCH on both ends of it is connecting two alternatives.  (Here we
++ * have one of the subtle syntax dependencies:  an individual BRANCH (as
++ * opposed to a collection of them) is never concatenated with anything
++ * because of operator precedence.)  The operand of some types of node is
++ * a literal string; for others, it is a node leading into a sub-FSM.  In
++ * particular, the operand of a BRANCH node is the first node of the branch.
++ * (NB this is *not* a tree structure:  the tail of the branch connects
++ * to the thing following the set of BRANCHes.)  The opcodes are:
++ */
++
++/* definition	number	opnd?	meaning */
++#define	END	0	/* no	End of program. */
++#define	BOL	1	/* no	Match "" at beginning of line. */
++#define	EOL	2	/* no	Match "" at end of line. */
++#define	ANY	3	/* no	Match any one character. */
++#define	ANYOF	4	/* str	Match any character in this string. */
++#define	ANYBUT	5	/* str	Match any character not in this string. */
++#define	BRANCH	6	/* node	Match this alternative, or the next... */
++#define	BACK	7	/* no	Match "", "next" ptr points backward. */
++#define	EXACTLY	8	/* str	Match this string. */
++#define	NOTHING	9	/* no	Match empty string. */
++#define	STAR	10	/* node	Match this (simple) thing 0 or more times. */
++#define	PLUS	11	/* node	Match this (simple) thing 1 or more times. */
++#define	OPEN	20	/* no	Mark this point in input as start of #n. */
++			/*	OPEN+1 is number 1, etc. */
++#define	CLOSE	30	/* no	Analogous to OPEN. */
++
++/*
++ * Opcode notes:
++ *
++ * BRANCH	The set of branches constituting a single choice are hooked
++ *		together with their "next" pointers, since precedence prevents
++ *		anything being concatenated to any individual branch.  The
++ *		"next" pointer of the last BRANCH in a choice points to the
++ *		thing following the whole choice.  This is also where the
++ *		final "next" pointer of each individual branch points; each
++ *		branch starts with the operand node of a BRANCH node.
++ *
++ * BACK		Normal "next" pointers all implicitly point forward; BACK
++ *		exists to make loop structures possible.
++ *
++ * STAR,PLUS	'?', and complex '*' and '+', are implemented as circular
++ *		BRANCH structures using BACK.  Simple cases (one character
++ *		per match) are implemented with STAR and PLUS for speed
++ *		and to minimize recursive plunges.
++ *
++ * OPEN,CLOSE	...are numbered at compile time.
++ */
++
++/*
++ * A node is one char of opcode followed by two chars of "next" pointer.
++ * "Next" pointers are stored as two 8-bit pieces, high order first.  The
++ * value is a positive offset from the opcode of the node containing it.
++ * An operand, if any, simply follows the node.  (Note that much of the
++ * code generation knows about this implicit relationship.)
++ *
++ * Using two bytes for the "next" pointer is vast overkill for most things,
++ * but allows patterns to get big without disasters.
++ */
++#define	OP(p)	(*(p))
++#define	NEXT(p)	(((*((p)+1)&0377)<<8) + (*((p)+2)&0377))
++#define	OPERAND(p)	((p) + 3)
++
++/*
++ * See regmagic.h for one further detail of program structure.
++ */
++
++
++/*
++ * Utility definitions.
++ */
++#ifndef CHARBITS
++#define	UCHARAT(p)	((int)*(unsigned char *)(p))
++#else
++#define	UCHARAT(p)	((int)*(p)&CHARBITS)
++#endif
++
++#define	FAIL(m)	{ regerror(m); return(NULL); }
++#define	ISMULT(c)	((c) == '*' || (c) == '+' || (c) == '?')
++#define	META	"^$.[()|?+*\\"
++
++/*
++ * Flags to be passed up and down.
++ */
++#define	HASWIDTH	01	/* Known never to match null string. */
++#define	SIMPLE		02	/* Simple enough to be STAR/PLUS operand. */
++#define	SPSTART		04	/* Starts with * or +. */
++#define	WORST		0	/* Worst case. */
++
++/*
++ * Global work variables for regcomp().
++ */
++struct match_globals {
++char *reginput;		/* String-input pointer. */
++char *regbol;		/* Beginning of input, for ^ check. */
++char **regstartp;	/* Pointer to startp array. */
++char **regendp;		/* Ditto for endp. */
++char *regparse;		/* Input-scan pointer. */
++int regnpar;		/* () count. */
++char regdummy;
++char *regcode;		/* Code-emit pointer; &regdummy = don't. */
++long regsize;		/* Code size. */
++};
++
++/*
++ * Forward declarations for regcomp()'s friends.
++ */
++#ifndef STATIC
++#define	STATIC	static
++#endif
++STATIC char *reg(struct match_globals *g, int paren,int *flagp);
++STATIC char *regbranch(struct match_globals *g, int *flagp);
++STATIC char *regpiece(struct match_globals *g, int *flagp);
++STATIC char *regatom(struct match_globals *g, int *flagp);
++STATIC char *regnode(struct match_globals *g, char op);
++STATIC char *regnext(struct match_globals *g, char *p);
++STATIC void regc(struct match_globals *g, char b);
++STATIC void reginsert(struct match_globals *g, char op, char *opnd);
++STATIC void regtail(struct match_globals *g, char *p, char *val);
++STATIC void regoptail(struct match_globals *g, char *p, char *val);
++
++
++__kernel_size_t my_strcspn(const char *s1,const char *s2)
++{
++        char *scan1;
++        char *scan2;
++        int count;
++
++        count = 0;
++        for (scan1 = (char *)s1; *scan1 != '\0'; scan1++) {
++                for (scan2 = (char *)s2; *scan2 != '\0';)       /* ++ moved down. */
++                        if (*scan1 == *scan2++)
++                                return(count);
++                count++;
++        }
++        return(count);
++}
++
++/*
++ - regcomp - compile a regular expression into internal code
++ *
++ * We can't allocate space until we know how big the compiled form will be,
++ * but we can't compile it (and thus know how big it is) until we've got a
++ * place to put the code.  So we cheat:  we compile it twice, once with code
++ * generation turned off and size counting turned on, and once "for real".
++ * This also means that we don't allocate space until we are sure that the
++ * thing really will compile successfully, and we never have to move the
++ * code and thus invalidate pointers into it.  (Note that it has to be in
++ * one piece because free() must be able to free it all.)
++ *
++ * Beware that the optimization-preparation code in here knows about some
++ * of the structure of the compiled regexp.
++ */
++regexp *
++regcomp(char *exp,int *patternsize)
++{
++	register regexp *r;
++	register char *scan;
++	register char *longest;
++	register int len;
++	int flags;
++	struct match_globals g;
++	
++	/* commented out by ethan
++	   extern char *malloc();
++	*/
++
++	if (exp == NULL)
++		FAIL("NULL argument");
++
++	/* First pass: determine size, legality. */
++	g.regparse = exp;
++	g.regnpar = 1;
++	g.regsize = 0L;
++	g.regcode = &g.regdummy;
++	regc(&g, MAGIC);
++	if (reg(&g, 0, &flags) == NULL)
++		return(NULL);
++
++	/* Small enough for pointer-storage convention? */
++	if (g.regsize >= 32767L)		/* Probably could be 65535L. */
++		FAIL("regexp too big");
++
++	/* Allocate space. */
++	*patternsize=sizeof(regexp) + (unsigned)g.regsize;
++	r = (regexp *)malloc(sizeof(regexp) + (unsigned)g.regsize);
++	if (r == NULL)
++		FAIL("out of space");
++
++	/* Second pass: emit code. */
++	g.regparse = exp;
++	g.regnpar = 1;
++	g.regcode = r->program;
++	regc(&g, MAGIC);
++	if (reg(&g, 0, &flags) == NULL)
++		return(NULL);
++
++	/* Dig out information for optimizations. */
++	r->regstart = '\0';	/* Worst-case defaults. */
++	r->reganch = 0;
++	r->regmust = NULL;
++	r->regmlen = 0;
++	scan = r->program+1;			/* First BRANCH. */
++	if (OP(regnext(&g, scan)) == END) {		/* Only one top-level choice. */
++		scan = OPERAND(scan);
++
++		/* Starting-point info. */
++		if (OP(scan) == EXACTLY)
++			r->regstart = *OPERAND(scan);
++		else if (OP(scan) == BOL)
++			r->reganch++;
++
++		/*
++		 * If there's something expensive in the r.e., find the
++		 * longest literal string that must appear and make it the
++		 * regmust.  Resolve ties in favor of later strings, since
++		 * the regstart check works with the beginning of the r.e.
++		 * and avoiding duplication strengthens checking.  Not a
++		 * strong reason, but sufficient in the absence of others.
++		 */
++		if (flags&SPSTART) {
++			longest = NULL;
++			len = 0;
++			for (; scan != NULL; scan = regnext(&g, scan))
++				if (OP(scan) == EXACTLY && strlen(OPERAND(scan)) >= len) {
++					longest = OPERAND(scan);
++					len = strlen(OPERAND(scan));
++				}
++			r->regmust = longest;
++			r->regmlen = len;
++		}
++	}
++
++	return(r);
++}
++
++/*
++ - reg - regular expression, i.e. main body or parenthesized thing
++ *
++ * Caller must absorb opening parenthesis.
++ *
++ * Combining parenthesis handling with the base level of regular expression
++ * is a trifle forced, but the need to tie the tails of the branches to what
++ * follows makes it hard to avoid.
++ */
++static char *
++reg(struct match_globals *g, int paren, int *flagp /* Parenthesized? */ )
++{
++	register char *ret;
++	register char *br;
++	register char *ender;
++	register int parno = 0; /* 0 makes gcc happy */
++	int flags;
++
++	*flagp = HASWIDTH;	/* Tentatively. */
++
++	/* Make an OPEN node, if parenthesized. */
++	if (paren) {
++		if (g->regnpar >= NSUBEXP)
++			FAIL("too many ()");
++		parno = g->regnpar;
++		g->regnpar++;
++		ret = regnode(g, OPEN+parno);
++	} else
++		ret = NULL;
++
++	/* Pick up the branches, linking them together. */
++	br = regbranch(g, &flags);
++	if (br == NULL)
++		return(NULL);
++	if (ret != NULL)
++		regtail(g, ret, br);	/* OPEN -> first. */
++	else
++		ret = br;
++	if (!(flags&HASWIDTH))
++		*flagp &= ~HASWIDTH;
++	*flagp |= flags&SPSTART;
++	while (*g->regparse == '|') {
++		g->regparse++;
++		br = regbranch(g, &flags);
++		if (br == NULL)
++			return(NULL);
++		regtail(g, ret, br);	/* BRANCH -> BRANCH. */
++		if (!(flags&HASWIDTH))
++			*flagp &= ~HASWIDTH;
++		*flagp |= flags&SPSTART;
++	}
++
++	/* Make a closing node, and hook it on the end. */
++	ender = regnode(g, (paren) ? CLOSE+parno : END);	
++	regtail(g, ret, ender);
++
++	/* Hook the tails of the branches to the closing node. */
++	for (br = ret; br != NULL; br = regnext(g, br))
++		regoptail(g, br, ender);
++
++	/* Check for proper termination. */
++	if (paren && *g->regparse++ != ')') {
++		FAIL("unmatched ()");
++	} else if (!paren && *g->regparse != '\0') {
++		if (*g->regparse == ')') {
++			FAIL("unmatched ()");
++		} else
++			FAIL("junk on end");	/* "Can't happen". */
++		/* NOTREACHED */
++	}
++
++	return(ret);
++}
++
++/*
++ - regbranch - one alternative of an | operator
++ *
++ * Implements the concatenation operator.
++ */
++static char *
++regbranch(struct match_globals *g, int *flagp)
++{
++	register char *ret;
++	register char *chain;
++	register char *latest;
++	int flags;
++
++	*flagp = WORST;		/* Tentatively. */
++
++	ret = regnode(g, BRANCH);
++	chain = NULL;
++	while (*g->regparse != '\0' && *g->regparse != '|' && *g->regparse != ')') {
++		latest = regpiece(g, &flags);
++		if (latest == NULL)
++			return(NULL);
++		*flagp |= flags&HASWIDTH;
++		if (chain == NULL)	/* First piece. */
++			*flagp |= flags&SPSTART;
++		else
++			regtail(g, chain, latest);
++		chain = latest;
++	}
++	if (chain == NULL)	/* Loop ran zero times. */
++		(void) regnode(g, NOTHING);
++
++	return(ret);
++}
++
++/*
++ - regpiece - something followed by possible [*+?]
++ *
++ * Note that the branching code sequences used for ? and the general cases
++ * of * and + are somewhat optimized:  they use the same NOTHING node as
++ * both the endmarker for their branch list and the body of the last branch.
++ * It might seem that this node could be dispensed with entirely, but the
++ * endmarker role is not redundant.
++ */
++static char *
++regpiece(struct match_globals *g, int *flagp)
++{
++	register char *ret;
++	register char op;
++	register char *next;
++	int flags;
++
++	ret = regatom(g, &flags);
++	if (ret == NULL)
++		return(NULL);
++
++	op = *g->regparse;
++	if (!ISMULT(op)) {
++		*flagp = flags;
++		return(ret);
++	}
++
++	if (!(flags&HASWIDTH) && op != '?')
++		FAIL("*+ operand could be empty");
++	*flagp = (op != '+') ? (WORST|SPSTART) : (WORST|HASWIDTH);
++
++	if (op == '*' && (flags&SIMPLE))
++		reginsert(g, STAR, ret);
++	else if (op == '*') {
++		/* Emit x* as (x&|), where & means "self". */
++		reginsert(g, BRANCH, ret);			/* Either x */
++		regoptail(g, ret, regnode(g, BACK));		/* and loop */
++		regoptail(g, ret, ret);			/* back */
++		regtail(g, ret, regnode(g, BRANCH));		/* or */
++		regtail(g, ret, regnode(g, NOTHING));		/* null. */
++	} else if (op == '+' && (flags&SIMPLE))
++		reginsert(g, PLUS, ret);
++	else if (op == '+') {
++		/* Emit x+ as x(&|), where & means "self". */
++		next = regnode(g, BRANCH);			/* Either */
++		regtail(g, ret, next);
++		regtail(g, regnode(g, BACK), ret);		/* loop back */
++		regtail(g, next, regnode(g, BRANCH));		/* or */
++		regtail(g, ret, regnode(g, NOTHING));		/* null. */
++	} else if (op == '?') {
++		/* Emit x? as (x|) */
++		reginsert(g, BRANCH, ret);			/* Either x */
++		regtail(g, ret, regnode(g, BRANCH));		/* or */
++		next = regnode(g, NOTHING);		/* null. */
++		regtail(g, ret, next);
++		regoptail(g, ret, next);
++	}
++	g->regparse++;
++	if (ISMULT(*g->regparse))
++		FAIL("nested *?+");
++
++	return(ret);
++}
++
++/*
++ - regatom - the lowest level
++ *
++ * Optimization:  gobbles an entire sequence of ordinary characters so that
++ * it can turn them into a single node, which is smaller to store and
++ * faster to run.  Backslashed characters are exceptions, each becoming a
++ * separate node; the code is simpler that way and it's not worth fixing.
++ */
++static char *
++regatom(struct match_globals *g, int *flagp)
++{
++	register char *ret;
++	int flags;
++
++	*flagp = WORST;		/* Tentatively. */
++
++	switch (*g->regparse++) {
++	case '^':
++		ret = regnode(g, BOL);
++		break;
++	case '$':
++		ret = regnode(g, EOL);
++		break;
++	case '.':
++		ret = regnode(g, ANY);
++		*flagp |= HASWIDTH|SIMPLE;
++		break;
++	case '[': {
++			register int class;
++			register int classend;
++
++			if (*g->regparse == '^') {	/* Complement of range. */
++				ret = regnode(g, ANYBUT);
++				g->regparse++;
++			} else
++				ret = regnode(g, ANYOF);
++			if (*g->regparse == ']' || *g->regparse == '-')
++				regc(g, *g->regparse++);
++			while (*g->regparse != '\0' && *g->regparse != ']') {
++				if (*g->regparse == '-') {
++					g->regparse++;
++					if (*g->regparse == ']' || *g->regparse == '\0')
++						regc(g, '-');
++					else {
++						class = UCHARAT(g->regparse-2)+1;
++						classend = UCHARAT(g->regparse);
++						if (class > classend+1)
++							FAIL("invalid [] range");
++						for (; class <= classend; class++)
++							regc(g, class);
++						g->regparse++;
++					}
++				} else
++					regc(g, *g->regparse++);
++			}
++			regc(g, '\0');
++			if (*g->regparse != ']')
++				FAIL("unmatched []");
++			g->regparse++;
++			*flagp |= HASWIDTH|SIMPLE;
++		}
++		break;
++	case '(':
++		ret = reg(g, 1, &flags);
++		if (ret == NULL)
++			return(NULL);
++		*flagp |= flags&(HASWIDTH|SPSTART);
++		break;
++	case '\0':
++	case '|':
++	case ')':
++		FAIL("internal urp");	/* Supposed to be caught earlier. */
++		break;
++	case '?':
++	case '+':
++	case '*':
++		FAIL("?+* follows nothing");
++		break;
++	case '\\':
++		if (*g->regparse == '\0')
++			FAIL("trailing \\");
++		ret = regnode(g, EXACTLY);
++		regc(g, *g->regparse++);
++		regc(g, '\0');
++		*flagp |= HASWIDTH|SIMPLE;
++		break;
++	default: {
++			register int len;
++			register char ender;
++
++			g->regparse--;
++			len = my_strcspn((const char *)g->regparse, (const char *)META);
++			if (len <= 0)
++				FAIL("internal disaster");
++			ender = *(g->regparse+len);
++			if (len > 1 && ISMULT(ender))
++				len--;		/* Back off clear of ?+* operand. */
++			*flagp |= HASWIDTH;
++			if (len == 1)
++				*flagp |= SIMPLE;
++			ret = regnode(g, EXACTLY);
++			while (len > 0) {
++				regc(g, *g->regparse++);
++				len--;
++			}
++			regc(g, '\0');
++		}
++		break;
++	}
++
++	return(ret);
++}
++
++/*
++ - regnode - emit a node
++ */
++static char *			/* Location. */
++regnode(struct match_globals *g, char op)
++{
++	register char *ret;
++	register char *ptr;
++
++	ret = g->regcode;
++	if (ret == &g->regdummy) {
++		g->regsize += 3;
++		return(ret);
++	}
++
++	ptr = ret;
++	*ptr++ = op;
++	*ptr++ = '\0';		/* Null "next" pointer. */
++	*ptr++ = '\0';
++	g->regcode = ptr;
++
++	return(ret);
++}
++
++/*
++ - regc - emit (if appropriate) a byte of code
++ */
++static void
++regc(struct match_globals *g, char b)
++{
++	if (g->regcode != &g->regdummy)
++		*g->regcode++ = b;
++	else
++		g->regsize++;
++}
++
++/*
++ - reginsert - insert an operator in front of already-emitted operand
++ *
++ * Means relocating the operand.
++ */
++static void
++reginsert(struct match_globals *g, char op, char* opnd)
++{
++	register char *src;
++	register char *dst;
++	register char *place;
++
++	if (g->regcode == &g->regdummy) {
++		g->regsize += 3;
++		return;
++	}
++
++	src = g->regcode;
++	g->regcode += 3;
++	dst = g->regcode;
++	while (src > opnd)
++		*--dst = *--src;
++
++	place = opnd;		/* Op node, where operand used to be. */
++	*place++ = op;
++	*place++ = '\0';
++	*place++ = '\0';
++}
++
++/*
++ - regtail - set the next-pointer at the end of a node chain
++ */
++static void
++regtail(struct match_globals *g, char *p, char *val)
++{
++	register char *scan;
++	register char *temp;
++	register int offset;
++
++	if (p == &g->regdummy)
++		return;
++
++	/* Find last node. */
++	scan = p;
++	for (;;) {
++		temp = regnext(g, scan);
++		if (temp == NULL)
++			break;
++		scan = temp;
++	}
++
++	if (OP(scan) == BACK)
++		offset = scan - val;
++	else
++		offset = val - scan;
++	*(scan+1) = (offset>>8)&0377;
++	*(scan+2) = offset&0377;
++}
++
++/*
++ - regoptail - regtail on operand of first argument; nop if operandless
++ */
++static void
++regoptail(struct match_globals *g, char *p, char *val)
++{
++	/* "Operandless" and "op != BRANCH" are synonymous in practice. */
++	if (p == NULL || p == &g->regdummy || OP(p) != BRANCH)
++		return;
++	regtail(g, OPERAND(p), val);
++}
++
++/*
++ * regexec and friends
++ */
++
++
++/*
++ * Forwards.
++ */
++STATIC int regtry(struct match_globals *g, regexp *prog, char *string);
++STATIC int regmatch(struct match_globals *g, char *prog);
++STATIC int regrepeat(struct match_globals *g, char *p);
++
++#ifdef DEBUG
++int regnarrate = 0;
++void regdump();
++STATIC char *regprop(char *op);
++#endif
++
++/*
++ - regexec - match a regexp against a string
++ */
++int
++regexec(regexp *prog, char *string)
++{
++	register char *s;
++	struct match_globals g;
++
++	/* Be paranoid... */
++	if (prog == NULL || string == NULL) {
++		printk("<3>Regexp: NULL parameter\n");
++		return(0);
++	}
++
++	/* Check validity of program. */
++	if (UCHARAT(prog->program) != MAGIC) {
++		printk("<3>Regexp: corrupted program\n");
++		return(0);
++	}
++
++	/* If there is a "must appear" string, look for it. */
++	if (prog->regmust != NULL) {
++		s = string;
++		while ((s = strchr(s, prog->regmust[0])) != NULL) {
++			if (strncmp(s, prog->regmust, prog->regmlen) == 0)
++				break;	/* Found it. */
++			s++;
++		}
++		if (s == NULL)	/* Not present. */
++			return(0);
++	}
++
++	/* Mark beginning of line for ^ . */
++	g.regbol = string;
++
++	/* Simplest case:  anchored match need be tried only once. */
++	if (prog->reganch)
++		return(regtry(&g, prog, string));
++
++	/* Messy cases:  unanchored match. */
++	s = string;
++	if (prog->regstart != '\0')
++		/* We know what char it must start with. */
++		while ((s = strchr(s, prog->regstart)) != NULL) {
++			if (regtry(&g, prog, s))
++				return(1);
++			s++;
++		}
++	else
++		/* We don't -- general case. */
++		do {
++			if (regtry(&g, prog, s))
++				return(1);
++		} while (*s++ != '\0');
++
++	/* Failure. */
++	return(0);
++}
++
++/*
++ - regtry - try match at specific point
++ */
++static int			/* 0 failure, 1 success */
++regtry(struct match_globals *g, regexp *prog, char *string)
++{
++	register int i;
++	register char **sp;
++	register char **ep;
++
++	g->reginput = string;
++	g->regstartp = prog->startp;
++	g->regendp = prog->endp;
++
++	sp = prog->startp;
++	ep = prog->endp;
++	for (i = NSUBEXP; i > 0; i--) {
++		*sp++ = NULL;
++		*ep++ = NULL;
++	}
++	if (regmatch(g, prog->program + 1)) {
++		prog->startp[0] = string;
++		prog->endp[0] = g->reginput;
++		return(1);
++	} else
++		return(0);
++}
++
++/*
++ - regmatch - main matching routine
++ *
++ * Conceptually the strategy is simple:  check to see whether the current
++ * node matches, call self recursively to see whether the rest matches,
++ * and then act accordingly.  In practice we make some effort to avoid
++ * recursion, in particular by going through "ordinary" nodes (that don't
++ * need to know whether the rest of the match failed) by a loop instead of
++ * by recursion.
++ */
++static int			/* 0 failure, 1 success */
++regmatch(struct match_globals *g, char *prog)
++{
++	register char *scan = prog; /* Current node. */
++	char *next;		    /* Next node. */
++
++#ifdef DEBUG
++	if (scan != NULL && regnarrate)
++		fprintf(stderr, "%s(\n", regprop(scan));
++#endif
++	while (scan != NULL) {
++#ifdef DEBUG
++		if (regnarrate)
++			fprintf(stderr, "%s...\n", regprop(scan));
++#endif
++		next = regnext(g, scan);
++
++		switch (OP(scan)) {
++		case BOL:
++			if (g->reginput != g->regbol)
++				return(0);
++			break;
++		case EOL:
++			if (*g->reginput != '\0')
++				return(0);
++			break;
++		case ANY:
++			if (*g->reginput == '\0')
++				return(0);
++			g->reginput++;
++			break;
++		case EXACTLY: {
++				register int len;
++				register char *opnd;
++
++				opnd = OPERAND(scan);
++				/* Inline the first character, for speed. */
++				if (*opnd != *g->reginput)
++					return(0);
++				len = strlen(opnd);
++				if (len > 1 && strncmp(opnd, g->reginput, len) != 0)
++					return(0);
++				g->reginput += len;
++			}
++			break;
++		case ANYOF:
++			if (*g->reginput == '\0' || strchr(OPERAND(scan), *g->reginput) == NULL)
++				return(0);
++			g->reginput++;
++			break;
++		case ANYBUT:
++			if (*g->reginput == '\0' || strchr(OPERAND(scan), *g->reginput) != NULL)
++				return(0);
++			g->reginput++;
++			break;
++		case NOTHING:
++		case BACK:
++			break;
++		case OPEN+1:
++		case OPEN+2:
++		case OPEN+3:
++		case OPEN+4:
++		case OPEN+5:
++		case OPEN+6:
++		case OPEN+7:
++		case OPEN+8:
++		case OPEN+9: {
++				register int no;
++				register char *save;
++
++				no = OP(scan) - OPEN;
++				save = g->reginput;
++
++				if (regmatch(g, next)) {
++					/*
++					 * Don't set startp if some later
++					 * invocation of the same parentheses
++					 * already has.
++					 */
++					if (g->regstartp[no] == NULL)
++						g->regstartp[no] = save;
++					return(1);
++				} else
++					return(0);
++			}
++			break;
++		case CLOSE+1:
++		case CLOSE+2:
++		case CLOSE+3:
++		case CLOSE+4:
++		case CLOSE+5:
++		case CLOSE+6:
++		case CLOSE+7:
++		case CLOSE+8:
++		case CLOSE+9:
++			{
++				register int no;
++				register char *save;
++
++				no = OP(scan) - CLOSE;
++				save = g->reginput;
++
++				if (regmatch(g, next)) {
++					/*
++					 * Don't set endp if some later
++					 * invocation of the same parentheses
++					 * already has.
++					 */
++					if (g->regendp[no] == NULL)
++						g->regendp[no] = save;
++					return(1);
++				} else
++					return(0);
++			}
++			break;
++		case BRANCH: {
++				register char *save;
++
++				if (OP(next) != BRANCH)		/* No choice. */
++					next = OPERAND(scan);	/* Avoid recursion. */
++				else {
++					do {
++						save = g->reginput;
++						if (regmatch(g, OPERAND(scan)))
++							return(1);
++						g->reginput = save;
++						scan = regnext(g, scan);
++					} while (scan != NULL && OP(scan) == BRANCH);
++					return(0);
++					/* NOTREACHED */
++				}
++			}
++			break;
++		case STAR:
++		case PLUS: {
++				register char nextch;
++				register int no;
++				register char *save;
++				register int min;
++
++				/*
++				 * Lookahead to avoid useless match attempts
++				 * when we know what character comes next.
++				 */
++				nextch = '\0';
++				if (OP(next) == EXACTLY)
++					nextch = *OPERAND(next);
++				min = (OP(scan) == STAR) ? 0 : 1;
++				save = g->reginput;
++				no = regrepeat(g, OPERAND(scan));
++				while (no >= min) {
++					/* If it could work, try it. */
++					if (nextch == '\0' || *g->reginput == nextch)
++						if (regmatch(g, next))
++							return(1);
++					/* Couldn't or didn't -- back up. */
++					no--;
++					g->reginput = save + no;
++				}
++				return(0);
++			}
++			break;
++		case END:
++			return(1);	/* Success! */
++			break;
++		default:
++			printk("<3>Regexp: memory corruption\n");
++			return(0);
++			break;
++		}
++
++		scan = next;
++	}
++
++	/*
++	 * We get here only if there's trouble -- normally "case END" is
++	 * the terminating point.
++	 */
++	printk("<3>Regexp: corrupted pointers\n");
++	return(0);
++}
++
++/*
++ - regrepeat - repeatedly match something simple, report how many
++ */
++static int
++regrepeat(struct match_globals *g, char *p)
++{
++	register int count = 0;
++	register char *scan;
++	register char *opnd;
++
++	scan = g->reginput;
++	opnd = OPERAND(p);
++	switch (OP(p)) {
++	case ANY:
++		count = strlen(scan);
++		scan += count;
++		break;
++	case EXACTLY:
++		while (*opnd == *scan) {
++			count++;
++			scan++;
++		}
++		break;
++	case ANYOF:
++		while (*scan != '\0' && strchr(opnd, *scan) != NULL) {
++			count++;
++			scan++;
++		}
++		break;
++	case ANYBUT:
++		while (*scan != '\0' && strchr(opnd, *scan) == NULL) {
++			count++;
++			scan++;
++		}
++		break;
++	default:		/* Oh dear.  Called inappropriately. */
++		printk("<3>Regexp: internal foulup\n");
++		count = 0;	/* Best compromise. */
++		break;
++	}
++	g->reginput = scan;
++
++	return(count);
++}
++
++/*
++ - regnext - dig the "next" pointer out of a node
++ */
++static char*
++regnext(struct match_globals *g, char *p)
++{
++	register int offset;
++
++	if (p == &g->regdummy)
++		return(NULL);
++
++	offset = NEXT(p);
++	if (offset == 0)
++		return(NULL);
++
++	if (OP(p) == BACK)
++		return(p-offset);
++	else
++		return(p+offset);
++}
++
++#ifdef DEBUG
++
++STATIC char *regprop();
++
++/*
++ - regdump - dump a regexp onto stdout in vaguely comprehensible form
++ */
++void
++regdump(regexp *r)
++{
++	register char *s;
++	register char op = EXACTLY;	/* Arbitrary non-END op. */
++	register char *next;
++	/* extern char *strchr(); */
++
++
++	s = r->program + 1;
++	while (op != END) {	/* While that wasn't END last time... */
++		op = OP(s);
++		printf("%2d%s", s-r->program, regprop(s));	/* Where, what. */
++		next = regnext(s);
++		if (next == NULL)		/* Next ptr. */
++			printf("(0)");
++		else
++			printf("(%d)", (s-r->program)+(next-s));
++		s += 3;
++		if (op == ANYOF || op == ANYBUT || op == EXACTLY) {
++			/* Literal string, where present. */
++			while (*s != '\0') {
++				putchar(*s);
++				s++;
++			}
++			s++;
++		}
++		putchar('\n');
++	}
++
++	/* Header fields of interest. */
++	if (r->regstart != '\0')
++		printf("start `%c' ", r->regstart);
++	if (r->reganch)
++		printf("anchored ");
++	if (r->regmust != NULL)
++		printf("must have \"%s\"", r->regmust);
++	printf("\n");
++}
++
++/*
++ - regprop - printable representation of opcode
++ */
++static char *
++regprop(char *op)
++{
++#define BUFLEN 50
++	register char *p;
++	static char buf[BUFLEN];
++
++	strcpy(buf, ":");
++
++	switch (OP(op)) {
++	case BOL:
++		p = "BOL";
++		break;
++	case EOL:
++		p = "EOL";
++		break;
++	case ANY:
++		p = "ANY";
++		break;
++	case ANYOF:
++		p = "ANYOF";
++		break;
++	case ANYBUT:
++		p = "ANYBUT";
++		break;
++	case BRANCH:
++		p = "BRANCH";
++		break;
++	case EXACTLY:
++		p = "EXACTLY";
++		break;
++	case NOTHING:
++		p = "NOTHING";
++		break;
++	case BACK:
++		p = "BACK";
++		break;
++	case END:
++		p = "END";
++		break;
++	case OPEN+1:
++	case OPEN+2:
++	case OPEN+3:
++	case OPEN+4:
++	case OPEN+5:
++	case OPEN+6:
++	case OPEN+7:
++	case OPEN+8:
++	case OPEN+9:
++		snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "OPEN%d", OP(op)-OPEN);
++		p = NULL;
++		break;
++	case CLOSE+1:
++	case CLOSE+2:
++	case CLOSE+3:
++	case CLOSE+4:
++	case CLOSE+5:
++	case CLOSE+6:
++	case CLOSE+7:
++	case CLOSE+8:
++	case CLOSE+9:
++		snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "CLOSE%d", OP(op)-CLOSE);
++		p = NULL;
++		break;
++	case STAR:
++		p = "STAR";
++		break;
++	case PLUS:
++		p = "PLUS";
++		break;
++	default:
++		printk("<3>Regexp: corrupted opcode\n");
++		break;
++	}
++	if (p != NULL)
++		strncat(buf, p, BUFLEN-strlen(buf));
++	return(buf);
++}
++#endif
++
++
+--- /dev/null
++++ b/net/netfilter/regexp/regexp.h
+@@ -0,0 +1,41 @@
++/*
++ * Definitions etc. for regexp(3) routines.
++ *
++ * Caveat:  this is V8 regexp(3) [actually, a reimplementation thereof],
++ * not the System V one.
++ */
++
++#ifndef REGEXP_H
++#define REGEXP_H
++
++
++/*
++http://www.opensource.apple.com/darwinsource/10.3/expect-1/expect/expect.h ,
++which contains a version of this library, says:
++
++ *
++ * NSUBEXP must be at least 10, and no greater than 117 or the parser
++ * will not work properly.
++ *
++
++However, it looks rather like this library is limited to 10.  If you think
++otherwise, let us know.
++*/
++
++#define NSUBEXP  10
++typedef struct regexp {
++	char *startp[NSUBEXP];
++	char *endp[NSUBEXP];
++	char regstart;		/* Internal use only. */
++	char reganch;		/* Internal use only. */
++	char *regmust;		/* Internal use only. */
++	int regmlen;		/* Internal use only. */
++	char program[1];	/* Unwarranted chumminess with compiler. */
++} regexp;
++
++regexp * regcomp(char *exp, int *patternsize);
++int regexec(regexp *prog, char *string);
++void regsub(regexp *prog, char *source, char *dest);
++void regerror(char *s);
++
++#endif
+--- /dev/null
++++ b/net/netfilter/regexp/regmagic.h
+@@ -0,0 +1,5 @@
++/*
++ * The first byte of the regexp internal "program" is actually this magic
++ * number; the start node begins in the second byte.
++ */
++#define	MAGIC	0234
+--- /dev/null
++++ b/net/netfilter/regexp/regsub.c
+@@ -0,0 +1,95 @@
++/*
++ * regsub
++ * @(#)regsub.c	1.3 of 2 April 86
++ *
++ *	Copyright (c) 1986 by University of Toronto.
++ *	Written by Henry Spencer.  Not derived from licensed software.
++ *
++ *	Permission is granted to anyone to use this software for any
++ *	purpose on any computer system, and to redistribute it freely,
++ *	subject to the following restrictions:
++ *
++ *	1. The author is not responsible for the consequences of use of
++ *		this software, no matter how awful, even if they arise
++ *		from defects in it.
++ *
++ *	2. The origin of this software must not be misrepresented, either
++ *		by explicit claim or by omission.
++ *
++ *	3. Altered versions must be plainly marked as such, and must not
++ *		be misrepresented as being the original software.
++ *
++ *
++ * This code was modified by Ethan Sommer to work within the kernel
++ * (it now uses kmalloc etc..)
++ *
++ */
++#include "regexp.h"
++#include "regmagic.h"
++#include <linux/string.h>
++
++
++#ifndef CHARBITS
++#define	UCHARAT(p)	((int)*(unsigned char *)(p))
++#else
++#define	UCHARAT(p)	((int)*(p)&CHARBITS)
++#endif
++
++#if 0
++//void regerror(char * s)
++//{
++//        printk("regexp(3): %s", s);
++//        /* NOTREACHED */
++//}
++#endif
++
++/*
++ - regsub - perform substitutions after a regexp match
++ */
++void
++regsub(regexp * prog, char * source, char * dest)
++{
++	register char *src;
++	register char *dst;
++	register char c;
++	register int no;
++	register int len;
++	
++	/* Not necessary and gcc doesn't like it -MLS */
++	/*extern char *strncpy();*/
++
++	if (prog == NULL || source == NULL || dest == NULL) {
++		regerror("NULL parm to regsub");
++		return;
++	}
++	if (UCHARAT(prog->program) != MAGIC) {
++		regerror("damaged regexp fed to regsub");
++		return;
++	}
++
++	src = source;
++	dst = dest;
++	while ((c = *src++) != '\0') {
++		if (c == '&')
++			no = 0;
++		else if (c == '\\' && '0' <= *src && *src <= '9')
++			no = *src++ - '0';
++		else
++			no = -1;
++
++		if (no < 0) {	/* Ordinary character. */
++			if (c == '\\' && (*src == '\\' || *src == '&'))
++				c = *src++;
++			*dst++ = c;
++		} else if (prog->startp[no] != NULL && prog->endp[no] != NULL) {
++			len = prog->endp[no] - prog->startp[no];
++			(void) strncpy(dst, prog->startp[no], len);
++			dst += len;
++			if (len != 0 && *(dst-1) == '\0') {	/* strncpy hit NUL. */
++				regerror("damaged match string");
++				return;
++			}
++		}
++	}
++	*dst++ = '\0';
++}
+--- /dev/null
++++ b/net/netfilter/xt_layer7.c
+@@ -0,0 +1,666 @@
++/*
++  Kernel module to match application layer (OSI layer 7) data in connections.
++
++  http://l7-filter.sf.net
++
++  (C) 2003-2009 Matthew Strait and Ethan Sommer.
++
++  This program is free software; you can redistribute it and/or
++  modify it under the terms of the GNU General Public License
++  as published by the Free Software Foundation; either version
++  2 of the License, or (at your option) any later version.
++  http://www.gnu.org/licenses/gpl.txt
++
++  Based on ipt_string.c (C) 2000 Emmanuel Roger <winfield@freegates.be>,
++  xt_helper.c (C) 2002 Harald Welte and cls_layer7.c (C) 2003 Matthew Strait,
++  Ethan Sommer, Justin Levandoski.
++*/
++
++#include <linux/spinlock.h>
++#include <linux/version.h>
++#include <net/ip.h>
++#include <net/tcp.h>
++#include <linux/module.h>
++#include <linux/skbuff.h>
++#include <linux/netfilter.h>
++#include <net/netfilter/nf_conntrack.h>
++#include <net/netfilter/nf_conntrack_core.h>
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)
++#include <net/netfilter/nf_conntrack_extend.h>
++#include <net/netfilter/nf_conntrack_acct.h>
++#endif
++#include <linux/netfilter/x_tables.h>
++#include <linux/netfilter/xt_layer7.h>
++#include <linux/ctype.h>
++#include <linux/proc_fs.h>
++
++#include "regexp/regexp.c"
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Matthew Strait <quadong@users.sf.net>, Ethan Sommer <sommere@users.sf.net>");
++MODULE_DESCRIPTION("iptables application layer match module");
++MODULE_ALIAS("ipt_layer7");
++MODULE_VERSION("2.21");
++
++static int maxdatalen = 2048; // this is the default
++module_param(maxdatalen, int, 0444);
++MODULE_PARM_DESC(maxdatalen, "maximum bytes of data looked at by l7-filter");
++#ifdef CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG
++	#define DPRINTK(format,args...) printk(format,##args)
++#else
++	#define DPRINTK(format,args...)
++#endif
++
++/* Number of packets whose data we look at.
++This can be modified through /proc/net/layer7_numpackets */
++static int num_packets = 10;
++
++static struct pattern_cache {
++	char * regex_string;
++	regexp * pattern;
++	struct pattern_cache * next;
++} * first_pattern_cache = NULL;
++
++DEFINE_SPINLOCK(l7_lock);
++
++static int total_acct_packets(struct nf_conn *ct)
++{
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 26)
++	BUG_ON(ct == NULL);
++	return (ct->counters[IP_CT_DIR_ORIGINAL].packets + ct->counters[IP_CT_DIR_REPLY].packets);
++#else
++	struct nf_conn_counter *acct;
++
++	BUG_ON(ct == NULL);
++	acct = nf_conn_acct_find(ct);
++	if (!acct)
++		return 0;
++	return (acct[IP_CT_DIR_ORIGINAL].packets + acct[IP_CT_DIR_REPLY].packets);
++#endif
++}
++
++#ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG
++/* Converts an unfriendly string into a friendly one by
++replacing unprintables with periods and all whitespace with " ". */
++static char * friendly_print(unsigned char * s)
++{
++	char * f = kmalloc(strlen(s) + 1, GFP_ATOMIC);
++	int i;
++
++	if(!f) {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory in "
++					"friendly_print, bailing.\n");
++		return NULL;
++	}
++
++	for(i = 0; i < strlen(s); i++){
++		if(isprint(s[i]) && s[i] < 128)	f[i] = s[i];
++		else if(isspace(s[i]))		f[i] = ' ';
++		else 				f[i] = '.';
++	}
++	f[i] = '\0';
++	return f;
++}
++
++static char dec2hex(int i)
++{
++	switch (i) {
++		case 0 ... 9:
++			return (i + '0');
++			break;
++		case 10 ... 15:
++			return (i - 10 + 'a');
++			break;
++		default:
++			if (net_ratelimit())
++				printk("layer7: Problem in dec2hex\n");
++			return '\0';
++	}
++}
++
++static char * hex_print(unsigned char * s)
++{
++	char * g = kmalloc(strlen(s)*3 + 1, GFP_ATOMIC);
++	int i;
++
++	if(!g) {
++	       if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory in hex_print, "
++					"bailing.\n");
++	       return NULL;
++	}
++
++	for(i = 0; i < strlen(s); i++) {
++		g[i*3    ] = dec2hex(s[i]/16);
++		g[i*3 + 1] = dec2hex(s[i]%16);
++		g[i*3 + 2] = ' ';
++	}
++	g[i*3] = '\0';
++
++	return g;
++}
++#endif // DEBUG
++
++/* Use instead of regcomp.  As we expect to be seeing the same regexps over and
++over again, it make sense to cache the results. */
++static regexp * compile_and_cache(const char * regex_string, 
++                                  const char * protocol)
++{
++	struct pattern_cache * node               = first_pattern_cache;
++	struct pattern_cache * last_pattern_cache = first_pattern_cache;
++	struct pattern_cache * tmp;
++	unsigned int len;
++
++	while (node != NULL) {
++		if (!strcmp(node->regex_string, regex_string))
++		return node->pattern;
++
++		last_pattern_cache = node;/* points at the last non-NULL node */
++		node = node->next;
++	}
++
++	/* If we reach the end of the list, then we have not yet cached
++	   the pattern for this regex. Let's do that now.
++	   Be paranoid about running out of memory to avoid list corruption. */
++	tmp = kmalloc(sizeof(struct pattern_cache), GFP_ATOMIC);
++
++	if(!tmp) {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory in "
++					"compile_and_cache, bailing.\n");
++		return NULL;
++	}
++
++	tmp->regex_string  = kmalloc(strlen(regex_string) + 1, GFP_ATOMIC);
++	tmp->pattern       = kmalloc(sizeof(struct regexp),    GFP_ATOMIC);
++	tmp->next = NULL;
++
++	if(!tmp->regex_string || !tmp->pattern) {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory in "
++					"compile_and_cache, bailing.\n");
++		kfree(tmp->regex_string);
++		kfree(tmp->pattern);
++		kfree(tmp);
++		return NULL;
++	}
++
++	/* Ok.  The new node is all ready now. */
++	node = tmp;
++
++	if(first_pattern_cache == NULL) /* list is empty */
++		first_pattern_cache = node; /* make node the beginning */
++	else
++		last_pattern_cache->next = node; /* attach node to the end */
++
++	/* copy the string and compile the regex */
++	len = strlen(regex_string);
++	DPRINTK("About to compile this: \"%s\"\n", regex_string);
++	node->pattern = regcomp((char *)regex_string, &len);
++	if ( !node->pattern ) {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: Error compiling regexp "
++					"\"%s\" (%s)\n", 
++					regex_string, protocol);
++		/* pattern is now cached as NULL, so we won't try again. */
++	}
++
++	strcpy(node->regex_string, regex_string);
++	return node->pattern;
++}
++
++static int can_handle(const struct sk_buff *skb)
++{
++	if(!ip_hdr(skb)) /* not IP */
++		return 0;
++	if(ip_hdr(skb)->protocol != IPPROTO_TCP &&
++	   ip_hdr(skb)->protocol != IPPROTO_UDP &&
++	   ip_hdr(skb)->protocol != IPPROTO_ICMP)
++		return 0;
++	return 1;
++}
++
++/* Returns offset the into the skb->data that the application data starts */
++static int app_data_offset(const struct sk_buff *skb)
++{
++	/* In case we are ported somewhere (ebtables?) where ip_hdr(skb)
++	isn't set, this can be gotten from 4*(skb->data[0] & 0x0f) as well. */
++	int ip_hl = 4*ip_hdr(skb)->ihl;
++
++	if( ip_hdr(skb)->protocol == IPPROTO_TCP ) {
++		/* 12 == offset into TCP header for the header length field.
++		Can't get this with skb->h.th->doff because the tcphdr
++		struct doesn't get set when routing (this is confirmed to be
++		true in Netfilter as well as QoS.) */
++		int tcp_hl = 4*(skb->data[ip_hl + 12] >> 4);
++
++		return ip_hl + tcp_hl;
++	} else if( ip_hdr(skb)->protocol == IPPROTO_UDP  ) {
++		return ip_hl + 8; /* UDP header is always 8 bytes */
++	} else if( ip_hdr(skb)->protocol == IPPROTO_ICMP ) {
++		return ip_hl + 8; /* ICMP header is 8 bytes */
++	} else {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: tried to handle unknown "
++					"protocol!\n");
++		return ip_hl + 8; /* something reasonable */
++	}
++}
++
++/* handles whether there's a match when we aren't appending data anymore */
++static int match_no_append(struct nf_conn * conntrack, 
++                           struct nf_conn * master_conntrack, 
++                           enum ip_conntrack_info ctinfo,
++                           enum ip_conntrack_info master_ctinfo,
++                           const struct xt_layer7_info * info)
++{
++	/* If we're in here, throw the app data away */
++	if(master_conntrack->layer7.app_data != NULL) {
++
++	#ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG
++		if(!master_conntrack->layer7.app_proto) {
++			char * f = 
++			  friendly_print(master_conntrack->layer7.app_data);
++			char * g = 
++			  hex_print(master_conntrack->layer7.app_data);
++			DPRINTK("\nl7-filter gave up after %d bytes "
++				"(%d packets):\n%s\n",
++				strlen(f), total_acct_packets(master_conntrack), f);
++			kfree(f);
++			DPRINTK("In hex: %s\n", g);
++			kfree(g);
++		}
++	#endif
++
++		kfree(master_conntrack->layer7.app_data);
++		master_conntrack->layer7.app_data = NULL; /* don't free again */
++	}
++
++	if(master_conntrack->layer7.app_proto){
++		/* Here child connections set their .app_proto (for /proc) */
++		if(!conntrack->layer7.app_proto) {
++			conntrack->layer7.app_proto = 
++			  kmalloc(strlen(master_conntrack->layer7.app_proto)+1, 
++			    GFP_ATOMIC);
++			if(!conntrack->layer7.app_proto){
++				if (net_ratelimit())
++					printk(KERN_ERR "layer7: out of memory "
++							"in match_no_append, "
++							"bailing.\n");
++				return 1;
++			}
++			strcpy(conntrack->layer7.app_proto, 
++				master_conntrack->layer7.app_proto);
++		}
++
++		return (!strcmp(master_conntrack->layer7.app_proto, 
++				info->protocol));
++	}
++	else {
++		/* If not classified, set to "unknown" to distinguish from
++		connections that are still being tested. */
++		master_conntrack->layer7.app_proto = 
++			kmalloc(strlen("unknown")+1, GFP_ATOMIC);
++		if(!master_conntrack->layer7.app_proto){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: out of memory in "
++						"match_no_append, bailing.\n");
++			return 1;
++		}
++		strcpy(master_conntrack->layer7.app_proto, "unknown");
++		return 0;
++	}
++}
++
++/* add the new app data to the conntrack.  Return number of bytes added. */
++static int add_data(struct nf_conn * master_conntrack,
++                    char * app_data, int appdatalen)
++{
++	int length = 0, i;
++	int oldlength = master_conntrack->layer7.app_data_len;
++
++	/* This is a fix for a race condition by Deti Fliegl. However, I'm not 
++	   clear on whether the race condition exists or whether this really 
++	   fixes it.  I might just be being dense... Anyway, if it's not really 
++	   a fix, all it does is waste a very small amount of time. */
++	if(!master_conntrack->layer7.app_data) return 0;
++
++	/* Strip nulls. Make everything lower case (our regex lib doesn't
++	do case insensitivity).  Add it to the end of the current data. */
++	for(i = 0; i < maxdatalen-oldlength-1 &&
++		   i < appdatalen; i++) {
++		if(app_data[i] != '\0') {
++			/* the kernel version of tolower mungs 'upper ascii' */
++			master_conntrack->layer7.app_data[length+oldlength] =
++				isascii(app_data[i])? 
++					tolower(app_data[i]) : app_data[i];
++			length++;
++		}
++	}
++
++	master_conntrack->layer7.app_data[length+oldlength] = '\0';
++	master_conntrack->layer7.app_data_len = length + oldlength;
++
++	return length;
++}
++
++/* taken from drivers/video/modedb.c */
++static int my_atoi(const char *s)
++{
++	int val = 0;
++
++	for (;; s++) {
++		switch (*s) {
++			case '0'...'9':
++			val = 10*val+(*s-'0');
++			break;
++		default:
++			return val;
++		}
++	}
++}
++
++/* write out num_packets to userland. */
++static int layer7_read_proc(char* page, char ** start, off_t off, int count,
++                            int* eof, void * data)
++{
++	if(num_packets > 99 && net_ratelimit())
++		printk(KERN_ERR "layer7: NOT REACHED. num_packets too big\n");
++
++	page[0] = num_packets/10 + '0';
++	page[1] = num_packets%10 + '0';
++	page[2] = '\n';
++	page[3] = '\0';
++
++	*eof=1;
++
++	return 3;
++}
++
++/* Read in num_packets from userland */
++static int layer7_write_proc(struct file* file, const char* buffer,
++                             unsigned long count, void *data)
++{
++	char * foo = kmalloc(count, GFP_ATOMIC);
++
++	if(!foo){
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory, bailing. "
++					"num_packets unchanged.\n");
++		return count;
++	}
++
++	if(copy_from_user(foo, buffer, count)) {
++		return -EFAULT;
++	}
++
++
++	num_packets = my_atoi(foo);
++	kfree (foo);
++
++	/* This has an arbitrary limit to make the math easier. I'm lazy.
++	But anyway, 99 is a LOT! If you want more, you're doing it wrong! */
++	if(num_packets > 99) {
++		printk(KERN_WARNING "layer7: num_packets can't be > 99.\n");
++		num_packets = 99;
++	} else if(num_packets < 1) {
++		printk(KERN_WARNING "layer7: num_packets can't be < 1.\n");
++		num_packets = 1;
++	}
++
++	return count;
++}
++
++static bool
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++match(const struct sk_buff *skbin, const struct xt_match_param *par)
++#else
++match(const struct sk_buff *skbin,
++      const struct net_device *in,
++      const struct net_device *out,
++      const struct xt_match *match,
++      const void *matchinfo,
++      int offset,
++      unsigned int protoff,
++      bool *hotdrop)
++#endif
++{
++	/* sidestep const without getting a compiler warning... */
++	struct sk_buff * skb = (struct sk_buff *)skbin; 
++
++	const struct xt_layer7_info * info = 
++	#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++		par->matchinfo;
++	#else
++		matchinfo;
++	#endif
++
++	enum ip_conntrack_info master_ctinfo, ctinfo;
++	struct nf_conn *master_conntrack, *conntrack;
++	unsigned char * app_data;
++	unsigned int pattern_result, appdatalen;
++	regexp * comppattern;
++
++	/* Be paranoid/incompetent - lock the entire match function. */
++	spin_lock_bh(&l7_lock);
++
++	if(!can_handle(skb)){
++		DPRINTK("layer7: This is some protocol I can't handle.\n");
++		spin_unlock_bh(&l7_lock);
++		return info->invert;
++	}
++
++	/* Treat parent & all its children together as one connection, except
++	for the purpose of setting conntrack->layer7.app_proto in the actual
++	connection. This makes /proc/net/ip_conntrack more satisfying. */
++	if(!(conntrack = nf_ct_get(skb, &ctinfo)) ||
++	   !(master_conntrack=nf_ct_get(skb,&master_ctinfo))){
++		DPRINTK("layer7: couldn't get conntrack.\n");
++		spin_unlock_bh(&l7_lock);
++		return info->invert;
++	}
++
++	/* Try to get a master conntrack (and its master etc) for FTP, etc. */
++	while (master_ct(master_conntrack) != NULL)
++		master_conntrack = master_ct(master_conntrack);
++
++	/* if we've classified it or seen too many packets */
++	if(total_acct_packets(master_conntrack) > num_packets ||
++	   master_conntrack->layer7.app_proto) {
++
++		pattern_result = match_no_append(conntrack, master_conntrack, 
++						 ctinfo, master_ctinfo, info);
++
++		/* skb->cb[0] == seen. Don't do things twice if there are 
++		multiple l7 rules. I'm not sure that using cb for this purpose 
++		is correct, even though it says "put your private variables 
++		there". But it doesn't look like it is being used for anything
++		else in the skbs that make it here. */
++		skb->cb[0] = 1; /* marking it seen here's probably irrelevant */
++
++		spin_unlock_bh(&l7_lock);
++		return (pattern_result ^ info->invert);
++	}
++
++	if(skb_is_nonlinear(skb)){
++		if(skb_linearize(skb) != 0){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: failed to linearize "
++						"packet, bailing.\n");
++			spin_unlock_bh(&l7_lock);
++			return info->invert;
++		}
++	}
++
++	/* now that the skb is linearized, it's safe to set these. */
++	app_data = skb->data + app_data_offset(skb);
++	appdatalen = skb_tail_pointer(skb) - app_data;
++
++	/* the return value gets checked later, when we're ready to use it */
++	comppattern = compile_and_cache(info->pattern, info->protocol);
++
++	/* On the first packet of a connection, allocate space for app data */
++	if(total_acct_packets(master_conntrack) == 1 && !skb->cb[0] && 
++	   !master_conntrack->layer7.app_data){
++		master_conntrack->layer7.app_data = 
++			kmalloc(maxdatalen, GFP_ATOMIC);
++		if(!master_conntrack->layer7.app_data){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: out of memory in "
++						"match, bailing.\n");
++			spin_unlock_bh(&l7_lock);
++			return info->invert;
++		}
++
++		master_conntrack->layer7.app_data[0] = '\0';
++	}
++
++	/* Can be here, but unallocated, if numpackets is increased near
++	the beginning of a connection */
++	if(master_conntrack->layer7.app_data == NULL){
++		spin_unlock_bh(&l7_lock);
++		return info->invert; /* unmatched */
++	}
++
++	if(!skb->cb[0]){
++		int newbytes;
++		newbytes = add_data(master_conntrack, app_data, appdatalen);
++
++		if(newbytes == 0) { /* didn't add any data */
++			skb->cb[0] = 1;
++			/* Didn't match before, not going to match now */
++			spin_unlock_bh(&l7_lock);
++			return info->invert;
++		}
++	}
++
++	/* If looking for "unknown", then never match.  "Unknown" means that
++	we've given up; we're still trying with these packets. */
++	if(!strcmp(info->protocol, "unknown")) {
++		pattern_result = 0;
++	/* If looking for "unset", then always match. "Unset" means that we
++	haven't yet classified the connection. */
++	} else if(!strcmp(info->protocol, "unset")) {
++		pattern_result = 2;
++		DPRINTK("layer7: matched unset: not yet classified "
++			"(%d/%d packets)\n",
++                        total_acct_packets(master_conntrack), num_packets);
++	/* If the regexp failed to compile, don't bother running it */
++	} else if(comppattern && 
++		  regexec(comppattern, master_conntrack->layer7.app_data)){
++		DPRINTK("layer7: matched %s\n", info->protocol);
++		pattern_result = 1;
++	} else pattern_result = 0;
++
++	if(pattern_result == 1) {
++		master_conntrack->layer7.app_proto = 
++			kmalloc(strlen(info->protocol)+1, GFP_ATOMIC);
++		if(!master_conntrack->layer7.app_proto){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: out of memory in "
++						"match, bailing.\n");
++			spin_unlock_bh(&l7_lock);
++			return (pattern_result ^ info->invert);
++		}
++		strcpy(master_conntrack->layer7.app_proto, info->protocol);
++	} else if(pattern_result > 1) { /* cleanup from "unset" */
++		pattern_result = 1;
++	}
++
++	/* mark the packet seen */
++	skb->cb[0] = 1;
++
++	spin_unlock_bh(&l7_lock);
++	return (pattern_result ^ info->invert);
++}
++
++// load nf_conntrack_ipv4
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++static bool check(const struct xt_mtchk_param *par)
++{
++        if (nf_ct_l3proto_try_module_get(par->match->family) < 0) {
++                printk(KERN_WARNING "can't load conntrack support for "
++                                    "proto=%d\n", par->match->family);
++#else
++static bool check(const char *tablename, const void *inf,
++		 const struct xt_match *match, void *matchinfo,
++		 unsigned int hook_mask)
++{
++        if (nf_ct_l3proto_try_module_get(match->family) < 0) {
++                printk(KERN_WARNING "can't load conntrack support for "
++                                    "proto=%d\n", match->family);
++#endif
++                return 0;
++        }
++	return 1;
++}
++
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++	static void destroy(const struct xt_mtdtor_param *par)
++	{
++		nf_ct_l3proto_module_put(par->match->family);
++	}
++#else
++	static void destroy(const struct xt_match *match, void *matchinfo)
++	{
++		nf_ct_l3proto_module_put(match->family);
++	}
++#endif
++
++static struct xt_match xt_layer7_match[] __read_mostly = {
++{
++	.name		= "layer7",
++	.family		= AF_INET,
++	.checkentry	= check,
++	.match		= match,
++	.destroy	= destroy,
++	.matchsize	= sizeof(struct xt_layer7_info),
++	.me		= THIS_MODULE
++}
++};
++
++static void layer7_cleanup_proc(void)
++{
++	remove_proc_entry("layer7_numpackets", init_net.proc_net);
++}
++
++/* register the proc file */
++static void layer7_init_proc(void)
++{
++	struct proc_dir_entry* entry;
++	entry = create_proc_entry("layer7_numpackets", 0644, init_net.proc_net);
++	entry->read_proc = layer7_read_proc;
++	entry->write_proc = layer7_write_proc;
++}
++
++static int __init xt_layer7_init(void)
++{
++	need_conntrack();
++
++	layer7_init_proc();
++	if(maxdatalen < 1) {
++		printk(KERN_WARNING "layer7: maxdatalen can't be < 1, "
++			"using 1\n");
++		maxdatalen = 1;
++	}
++	/* This is not a hard limit.  It's just here to prevent people from
++	bringing their slow machines to a grinding halt. */
++	else if(maxdatalen > 65536) {
++		printk(KERN_WARNING "layer7: maxdatalen can't be > 65536, "
++			"using 65536\n");
++		maxdatalen = 65536;
++	}
++	return xt_register_matches(xt_layer7_match,
++				   ARRAY_SIZE(xt_layer7_match));
++}
++
++static void __exit xt_layer7_fini(void)
++{
++	layer7_cleanup_proc();
++	xt_unregister_matches(xt_layer7_match, ARRAY_SIZE(xt_layer7_match));
++}
++
++module_init(xt_layer7_init);
++module_exit(xt_layer7_fini);
diff --git a/target/linux/generic/patches-2.6.34/101-netfilter_layer7_pktmatch.patch b/target/linux/generic/patches-2.6.34/101-netfilter_layer7_pktmatch.patch
new file mode 100644
index 0000000000..f65e301fd1
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/101-netfilter_layer7_pktmatch.patch
@@ -0,0 +1,108 @@
+--- a/include/linux/netfilter/xt_layer7.h
++++ b/include/linux/netfilter/xt_layer7.h
+@@ -8,6 +8,7 @@ struct xt_layer7_info {
+     char protocol[MAX_PROTOCOL_LEN];
+     char pattern[MAX_PATTERN_LEN];
+     u_int8_t invert;
++    u_int8_t pkt;
+ };
+ 
+ #endif /* _XT_LAYER7_H */
+--- a/net/netfilter/xt_layer7.c
++++ b/net/netfilter/xt_layer7.c
+@@ -314,33 +314,35 @@ static int match_no_append(struct nf_con
+ }
+ 
+ /* add the new app data to the conntrack.  Return number of bytes added. */
+-static int add_data(struct nf_conn * master_conntrack,
+-                    char * app_data, int appdatalen)
++static int add_datastr(char *target, int offset, char *app_data, int len)
+ {
+ 	int length = 0, i;
+-	int oldlength = master_conntrack->layer7.app_data_len;
+-
+-	/* This is a fix for a race condition by Deti Fliegl. However, I'm not 
+-	   clear on whether the race condition exists or whether this really 
+-	   fixes it.  I might just be being dense... Anyway, if it's not really 
+-	   a fix, all it does is waste a very small amount of time. */
+-	if(!master_conntrack->layer7.app_data) return 0;
++	if (!target) return 0;
+ 
+ 	/* Strip nulls. Make everything lower case (our regex lib doesn't
+ 	do case insensitivity).  Add it to the end of the current data. */
+-	for(i = 0; i < maxdatalen-oldlength-1 &&
+-		   i < appdatalen; i++) {
++ 	for(i = 0; i < maxdatalen-offset-1 && i < len; i++) {
+ 		if(app_data[i] != '\0') {
+ 			/* the kernel version of tolower mungs 'upper ascii' */
+-			master_conntrack->layer7.app_data[length+oldlength] =
++			target[length+offset] =
+ 				isascii(app_data[i])? 
+ 					tolower(app_data[i]) : app_data[i];
+ 			length++;
+ 		}
+ 	}
++	target[length+offset] = '\0';
++
++	return length;
++}
++
++/* add the new app data to the conntrack.  Return number of bytes added. */
++static int add_data(struct nf_conn * master_conntrack,
++                    char * app_data, int appdatalen)
++{
++	int length;
+ 
+-	master_conntrack->layer7.app_data[length+oldlength] = '\0';
+-	master_conntrack->layer7.app_data_len = length + oldlength;
++	length = add_datastr(master_conntrack->layer7.app_data, master_conntrack->layer7.app_data_len, app_data, appdatalen);
++	master_conntrack->layer7.app_data_len += length;
+ 
+ 	return length;
+ }
+@@ -438,7 +440,7 @@ match(const struct sk_buff *skbin,
+ 
+ 	enum ip_conntrack_info master_ctinfo, ctinfo;
+ 	struct nf_conn *master_conntrack, *conntrack;
+-	unsigned char * app_data;
++	unsigned char *app_data, *tmp_data;
+ 	unsigned int pattern_result, appdatalen;
+ 	regexp * comppattern;
+ 
+@@ -466,8 +468,8 @@ match(const struct sk_buff *skbin,
+ 		master_conntrack = master_ct(master_conntrack);
+ 
+ 	/* if we've classified it or seen too many packets */
+-	if(total_acct_packets(master_conntrack) > num_packets ||
+-	   master_conntrack->layer7.app_proto) {
++	if(!info->pkt && (total_acct_packets(master_conntrack) > num_packets ||
++	   master_conntrack->layer7.app_proto)) {
+ 
+ 		pattern_result = match_no_append(conntrack, master_conntrack, 
+ 						 ctinfo, master_ctinfo, info);
+@@ -500,6 +502,25 @@ match(const struct sk_buff *skbin,
+ 	/* the return value gets checked later, when we're ready to use it */
+ 	comppattern = compile_and_cache(info->pattern, info->protocol);
+ 
++	if (info->pkt) {
++		tmp_data = kmalloc(maxdatalen, GFP_ATOMIC);
++		if(!tmp_data){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: out of memory in match, bailing.\n");
++			return info->invert;
++		}
++
++		tmp_data[0] = '\0';
++		add_datastr(tmp_data, 0, app_data, appdatalen);
++		pattern_result = ((comppattern && regexec(comppattern, tmp_data)) ? 1 : 0);
++
++		kfree(tmp_data);
++		tmp_data = NULL;
++		spin_unlock_bh(&l7_lock);
++
++		return (pattern_result ^ info->invert);
++	}
++
+ 	/* On the first packet of a connection, allocate space for app data */
+ 	if(total_acct_packets(master_conntrack) == 1 && !skb->cb[0] && 
+ 	   !master_conntrack->layer7.app_data){
diff --git a/target/linux/generic/patches-2.6.34/110-netfilter_match_speedup.patch b/target/linux/generic/patches-2.6.34/110-netfilter_match_speedup.patch
new file mode 100644
index 0000000000..41c487b689
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/110-netfilter_match_speedup.patch
@@ -0,0 +1,144 @@
+--- a/include/linux/netfilter_ipv4/ip_tables.h
++++ b/include/linux/netfilter_ipv4/ip_tables.h
+@@ -62,6 +62,7 @@ struct ipt_ip {
+ #define IPT_F_FRAG		0x01	/* Set if rule is a fragment rule */
+ #define IPT_F_GOTO		0x02	/* Set if jump is a goto */
+ #define IPT_F_MASK		0x03	/* All possible flag bits mask. */
++#define IPT_F_NO_DEF_MATCH	0x80	/* Internal: no default match rules present */
+ 
+ /* Values for "inv" field in struct ipt_ip. */
+ #define IPT_INV_VIA_IN		0x01	/* Invert the sense of IN IFACE. */
+--- a/net/ipv4/netfilter/ip_tables.c
++++ b/net/ipv4/netfilter/ip_tables.c
+@@ -95,6 +95,9 @@ ip_packet_match(const struct iphdr *ip,
+ 
+ #define FWINV(bool, invflg) ((bool) ^ !!(ipinfo->invflags & (invflg)))
+ 
++	if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
++		return true;
++
+ 	if (FWINV((ip->saddr&ipinfo->smsk.s_addr) != ipinfo->src.s_addr,
+ 		  IPT_INV_SRCIP) ||
+ 	    FWINV((ip->daddr&ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr,
+@@ -145,13 +148,35 @@ ip_packet_match(const struct iphdr *ip,
+ 		return false;
+ 	}
+ 
++#undef FWINV
+ 	return true;
+ }
+ 
+ static bool
+-ip_checkentry(const struct ipt_ip *ip)
++ip_checkentry(struct ipt_ip *ip)
+ {
+-	if (ip->flags & ~IPT_F_MASK) {
++#define FWINV(bool, invflg) ((bool) || (ip->invflags & (invflg)))
++
++	if (FWINV(ip->smsk.s_addr, IPT_INV_SRCIP) ||
++		FWINV(ip->dmsk.s_addr, IPT_INV_DSTIP))
++		goto has_match_rules;
++
++	if (FWINV(!!((const unsigned long *)ip->iniface_mask)[0],
++		IPT_INV_VIA_IN) ||
++	    FWINV(!!((const unsigned long *)ip->outiface_mask)[0],
++		IPT_INV_VIA_OUT))
++		goto has_match_rules;
++
++	if (FWINV(ip->proto, IPT_INV_PROTO))
++		goto has_match_rules;
++
++	if (FWINV(ip->flags&IPT_F_FRAG, IPT_INV_FRAG))
++		goto has_match_rules;
++
++	ip->flags |= IPT_F_NO_DEF_MATCH;
++
++has_match_rules:
++	if (ip->flags & ~(IPT_F_MASK|IPT_F_NO_DEF_MATCH)) {
+ 		duprintf("Unknown flag bits set: %08X\n",
+ 			 ip->flags & ~IPT_F_MASK);
+ 		return false;
+@@ -161,6 +186,8 @@ ip_checkentry(const struct ipt_ip *ip)
+ 			 ip->invflags & ~IPT_INV_MASK);
+ 		return false;
+ 	}
++
++#undef FWINV
+ 	return true;
+ }
+ 
+@@ -203,7 +230,6 @@ static inline bool unconditional(const s
+ 	static const struct ipt_ip uncond;
+ 
+ 	return memcmp(ip, &uncond, sizeof(uncond)) == 0;
+-#undef FWINV
+ }
+ 
+ /* for const-correctness */
+@@ -336,8 +362,28 @@ ipt_do_table(struct sk_buff *skb,
+ 	struct xt_match_param mtpar;
+ 	struct xt_target_param tgpar;
+ 
+-	/* Initialization */
+ 	ip = ip_hdr(skb);
++
++	IP_NF_ASSERT(table->valid_hooks & (1 << hook));
++	xt_info_rdlock_bh();
++	private = table->private;
++	table_base = private->entries[smp_processor_id()];
++	e = get_entry(table_base, private->hook_entry[hook]);
++
++	if (e->target_offset <= sizeof(struct ipt_entry) &&
++		(e->ip.flags & IPT_F_NO_DEF_MATCH)) {
++			struct ipt_entry_target *t = ipt_get_target(e);
++			if (!t->u.kernel.target->target) {
++				int v = ((struct ipt_standard_target *)t)->verdict;
++				if ((v < 0) && (v != IPT_RETURN)) {
++					ADD_COUNTER(e->counters, ntohs(ip->tot_len), 1);
++					xt_info_rdunlock_bh();
++					return (unsigned)(-v) - 1;
++				}
++			}
++	}
++
++	/* Initialization */
+ 	indev = in ? in->name : nulldevname;
+ 	outdev = out ? out->name : nulldevname;
+ 	/* We handle fragments by dealing with the first fragment as
+@@ -354,13 +400,6 @@ ipt_do_table(struct sk_buff *skb,
+ 	mtpar.family  = tgpar.family = NFPROTO_IPV4;
+ 	mtpar.hooknum = tgpar.hooknum = hook;
+ 
+-	IP_NF_ASSERT(table->valid_hooks & (1 << hook));
+-	xt_info_rdlock_bh();
+-	private = table->private;
+-	table_base = private->entries[smp_processor_id()];
+-
+-	e = get_entry(table_base, private->hook_entry[hook]);
+-
+ 	/* For return from builtin chain */
+ 	back = get_entry(table_base, private->underflow[hook]);
+ 
+@@ -991,6 +1030,7 @@ copy_entries_to_user(unsigned int total_
+ 		unsigned int i;
+ 		const struct ipt_entry_match *m;
+ 		const struct ipt_entry_target *t;
++		u8 flags;
+ 
+ 		e = (struct ipt_entry *)(loc_cpu_entry + off);
+ 		if (copy_to_user(userptr + off
+@@ -1000,6 +1040,14 @@ copy_entries_to_user(unsigned int total_
+ 			ret = -EFAULT;
+ 			goto free_counters;
+ 		}
++
++		flags = e->ip.flags & ~IPT_F_NO_DEF_MATCH;
++		if (copy_to_user(userptr + off
++				 + offsetof(struct ipt_entry, ip.flags),
++				 &flags, sizeof(flags)) != 0) {
++			ret = -EFAULT;
++			goto free_counters;
++		}
+ 
+ 		for (i = sizeof(struct ipt_entry);
+ 		     i < e->target_offset;
diff --git a/target/linux/generic/patches-2.6.34/150-netfilter_imq.patch b/target/linux/generic/patches-2.6.34/150-netfilter_imq.patch
new file mode 100644
index 0000000000..d595346874
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/150-netfilter_imq.patch
@@ -0,0 +1,1336 @@
+--- /dev/null
++++ b/drivers/net/imq.c
+@@ -0,0 +1,632 @@
++/*
++ *             Pseudo-driver for the intermediate queue device.
++ *
++ *             This program is free software; you can redistribute it and/or
++ *             modify it under the terms of the GNU General Public License
++ *             as published by the Free Software Foundation; either version
++ *             2 of the License, or (at your option) any later version.
++ *
++ * Authors:    Patrick McHardy, <kaber@trash.net>
++ *
++ *            The first version was written by Martin Devera, <devik@cdi.cz>
++ *
++ * Credits:    Jan Rafaj <imq2t@cedric.vabo.cz>
++ *              - Update patch to 2.4.21
++ *             Sebastian Strollo <sstrollo@nortelnetworks.com>
++ *              - Fix "Dead-loop on netdevice imq"-issue
++ *             Marcel Sebek <sebek64@post.cz>
++ *              - Update to 2.6.2-rc1
++ *
++ *	       After some time of inactivity there is a group taking care
++ *	       of IMQ again: http://www.linuximq.net
++ *
++ *
++ *	       2004/06/30 - New version of IMQ patch to kernels <=2.6.7
++ *             including the following changes:
++ *
++ *	       - Correction of ipv6 support "+"s issue (Hasso Tepper)
++ *	       - Correction of imq_init_devs() issue that resulted in
++ *	       kernel OOPS unloading IMQ as module (Norbert Buchmuller)
++ *	       - Addition of functionality to choose number of IMQ devices
++ *	       during kernel config (Andre Correa)
++ *	       - Addition of functionality to choose how IMQ hooks on
++ *	       PRE and POSTROUTING (after or before NAT) (Andre Correa)
++ *	       - Cosmetic corrections (Norbert Buchmuller) (Andre Correa)
++ *
++ *
++ *             2005/12/16 - IMQ versions between 2.6.7 and 2.6.13 were
++ *             released with almost no problems. 2.6.14-x was released
++ *             with some important changes: nfcache was removed; After
++ *             some weeks of trouble we figured out that some IMQ fields
++ *             in skb were missing in skbuff.c - skb_clone and copy_skb_header.
++ *             These functions are correctly patched by this new patch version.
++ *
++ *             Thanks for all who helped to figure out all the problems with
++ *             2.6.14.x: Patrick McHardy, Rune Kock, VeNoMouS, Max CtRiX,
++ *             Kevin Shanahan, Richard Lucassen, Valery Dachev (hopefully
++ *             I didn't forget anybody). I apologize again for my lack of time.
++ *
++ *
++ *             2008/06/17 - 2.6.25 - Changed imq.c to use qdisc_run() instead 
++ *             of qdisc_restart() and moved qdisc_run() to tasklet to avoid
++ *             recursive locking. New initialization routines to fix 'rmmod' not
++ *             working anymore. Used code from ifb.c. (Jussi Kivilinna)
++ *
++ *             2008/08/06 - 2.6.26 - (JK)
++ *              - Replaced tasklet with 'netif_schedule()'.
++ *              - Cleaned up and added comments for imq_nf_queue().
++ *
++ *             2009/04/12
++ *              - Add skb_save_cb/skb_restore_cb helper functions for backuping
++ *                control buffer. This is needed because qdisc-layer on kernels
++ *                2.6.27 and newer overwrite control buffer. (Jussi Kivilinna)
++ *              - Add better locking for IMQ device. Hopefully this will solve
++ *                SMP issues. (Jussi Kivilinna)
++ *              - Port to 2.6.27
++ *              - Port to 2.6.28
++ *              - Port to 2.6.29 + fix rmmod not working
++ *
++ *             2009/04/20 - (Jussi Kivilinna)
++ *              - Use netdevice feature flags to avoid extra packet handling
++ *                by core networking layer and possibly increase performance.
++ *
++ *             2009/09/26 - (Jussi Kivilinna)
++ *              - Add imq_nf_reinject_lockless to fix deadlock with
++ *                imq_nf_queue/imq_nf_reinject.
++ *
++ *             2009/12/08 - (Jussi Kivilinna)
++ *              - Port to 2.6.32
++ *              - Add check for skb->nf_queue_entry==NULL in imq_dev_xmit()
++ *              - Also add better error checking for skb->nf_queue_entry usage
++ *
++ *	       Also, many thanks to pablo Sebastian Greco for making the initial
++ *	       patch and to those who helped the testing.
++ *
++ *             More info at: http://www.linuximq.net/ (Andre Correa)
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/moduleparam.h>
++#include <linux/list.h>
++#include <linux/skbuff.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/rtnetlink.h>
++#include <linux/if_arp.h>
++#include <linux/netfilter.h>
++#include <linux/netfilter_ipv4.h>
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++	#include <linux/netfilter_ipv6.h>
++#endif
++#include <linux/imq.h>
++#include <net/pkt_sched.h>
++#include <net/netfilter/nf_queue.h>
++
++static nf_hookfn imq_nf_hook;
++
++static struct nf_hook_ops imq_ingress_ipv4 = {
++	.hook		= imq_nf_hook,
++	.owner		= THIS_MODULE,
++	.pf		= PF_INET,
++	.hooknum	= NF_INET_PRE_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++	.priority	= NF_IP_PRI_MANGLE + 1
++#else
++	.priority	= NF_IP_PRI_NAT_DST + 1
++#endif
++};
++
++static struct nf_hook_ops imq_egress_ipv4 = {
++	.hook		= imq_nf_hook,
++	.owner		= THIS_MODULE,
++	.pf		= PF_INET,
++	.hooknum	= NF_INET_POST_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_AA) || defined(CONFIG_IMQ_BEHAVIOR_BA)
++	.priority	= NF_IP_PRI_LAST
++#else
++	.priority	= NF_IP_PRI_NAT_SRC - 1
++#endif
++};
++
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++static struct nf_hook_ops imq_ingress_ipv6 = {
++	.hook		= imq_nf_hook,
++	.owner		= THIS_MODULE,
++	.pf		= PF_INET6,
++	.hooknum	= NF_INET_PRE_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++	.priority	= NF_IP6_PRI_MANGLE + 1
++#else
++	.priority	= NF_IP6_PRI_NAT_DST + 1
++#endif
++};
++
++static struct nf_hook_ops imq_egress_ipv6 = {
++	.hook		= imq_nf_hook,
++	.owner		= THIS_MODULE,
++	.pf		= PF_INET6,
++	.hooknum	= NF_INET_POST_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_AA) || defined(CONFIG_IMQ_BEHAVIOR_BA)
++	.priority	= NF_IP6_PRI_LAST
++#else
++	.priority	= NF_IP6_PRI_NAT_SRC - 1
++#endif
++};
++#endif
++
++#if defined(CONFIG_IMQ_NUM_DEVS)
++static unsigned int numdevs = CONFIG_IMQ_NUM_DEVS;
++#else
++static unsigned int numdevs = IMQ_MAX_DEVS;
++#endif
++
++static DEFINE_SPINLOCK(imq_nf_queue_lock);
++
++static struct net_device *imq_devs_cache[IMQ_MAX_DEVS];
++
++
++static struct net_device_stats *imq_get_stats(struct net_device *dev)
++{
++	return &dev->stats;
++}
++
++/* called for packets kfree'd in qdiscs at places other than enqueue */
++static void imq_skb_destructor(struct sk_buff *skb)
++{
++	struct nf_queue_entry *entry = skb->nf_queue_entry;
++
++	skb->nf_queue_entry = NULL;
++
++	if (entry) {
++		nf_queue_entry_release_refs(entry);
++		kfree(entry);
++	}
++
++	skb_restore_cb(skb); /* kfree backup */
++}
++
++/* locking not needed when called from imq_nf_queue */
++static void imq_nf_reinject_lockless(struct nf_queue_entry *entry,
++						unsigned int verdict)
++{
++	int status;
++
++	if (!entry->next_outfn) {
++		nf_reinject(entry, verdict);
++		return;
++	}
++
++	status = entry->next_outfn(entry, entry->next_queuenum);
++	if (status < 0) {
++		nf_queue_entry_release_refs(entry);
++		kfree_skb(entry->skb);
++		kfree(entry);
++	}
++}
++
++static void imq_nf_reinject(struct nf_queue_entry *entry, unsigned int verdict)
++{
++	int status;
++
++	if (!entry->next_outfn) {
++		spin_lock_bh(&imq_nf_queue_lock);
++		nf_reinject(entry, verdict);
++		spin_unlock_bh(&imq_nf_queue_lock);
++		return;
++	}
++
++	rcu_read_lock();
++	local_bh_disable();
++	status = entry->next_outfn(entry, entry->next_queuenum);
++	local_bh_enable();
++	if (status < 0) {
++		nf_queue_entry_release_refs(entry);
++		kfree_skb(entry->skb);
++		kfree(entry);
++	}
++
++	rcu_read_unlock();
++}
++
++static netdev_tx_t imq_dev_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++	struct nf_queue_entry *entry = skb->nf_queue_entry;
++
++	skb->nf_queue_entry = NULL;
++	dev->trans_start = jiffies;
++
++	dev->stats.tx_bytes += skb->len;
++	dev->stats.tx_packets++;
++
++	if (entry == NULL) {
++		/* We don't know what is going on here.. packet is queued for
++		 * imq device, but (probably) not by us.
++		 *
++		 * If this packet was not send here by imq_nf_queue(), then
++		 * skb_save_cb() was not used and skb_free() should not show:
++		 *   WARNING: IMQ: kfree_skb: skb->cb_next:..
++		 * and/or
++		 *   WARNING: IMQ: kfree_skb: skb->nf_queue_entry...
++		 *
++		 * However if this message is shown, then IMQ is somehow broken
++		 * and you should report this to linuximq.net.
++		 */
++
++		/* imq_dev_xmit is black hole that eats all packets, report that
++		 * we eat this packet happily and increase dropped counters.
++		 */
++
++		dev->stats.tx_dropped++;
++		dev_kfree_skb(skb);
++
++		return NETDEV_TX_OK;
++	}
++
++	skb_restore_cb(skb); /* restore skb->cb */
++
++	skb->imq_flags = 0;
++	skb->destructor = NULL;
++
++	imq_nf_reinject(entry, NF_ACCEPT);
++
++	return NETDEV_TX_OK;
++}
++
++static int imq_nf_queue(struct nf_queue_entry *entry, unsigned queue_num)
++{
++	struct net_device *dev;
++	struct sk_buff *skb_orig, *skb, *skb_shared;
++	struct Qdisc *q;
++	struct netdev_queue *txq;
++	int users, index;
++	int retval = -EINVAL;
++
++	index = entry->skb->imq_flags & IMQ_F_IFMASK;
++	if (unlikely(index > numdevs - 1)) {
++		if (net_ratelimit())
++			printk(KERN_WARNING
++			       "IMQ: invalid device specified, highest is %u\n",
++			       numdevs - 1);
++		retval = -EINVAL;
++		goto out;
++	}
++
++	/* check for imq device by index from cache */
++	dev = imq_devs_cache[index];
++	if (unlikely(!dev)) {
++		char buf[8];
++
++		/* get device by name and cache result */
++		snprintf(buf, sizeof(buf), "imq%d", index);
++		dev = dev_get_by_name(&init_net, buf);
++		if (!dev) {
++			/* not found ?!*/
++			BUG();
++			retval = -ENODEV;
++			goto out;
++		}
++
++		imq_devs_cache[index] = dev;
++		dev_put(dev);
++	}
++
++	if (unlikely(!(dev->flags & IFF_UP))) {
++		entry->skb->imq_flags = 0;
++		imq_nf_reinject_lockless(entry, NF_ACCEPT);
++		retval = 0;
++		goto out;
++	}
++	dev->last_rx = jiffies;
++
++	skb = entry->skb;
++	skb_orig = NULL;
++
++	/* skb has owner? => make clone */
++	if (unlikely(skb->destructor)) {
++		skb_orig = skb;
++		skb = skb_clone(skb, GFP_ATOMIC);
++		if (!skb) {
++			retval = -ENOMEM;
++			goto out;
++		}
++		entry->skb = skb;
++	}
++
++	skb->nf_queue_entry = entry;
++
++	dev->stats.rx_bytes += skb->len;
++	dev->stats.rx_packets++;
++
++	txq = dev_pick_tx(dev, skb);
++
++	q = rcu_dereference(txq->qdisc);
++	if (unlikely(!q->enqueue))
++		goto packet_not_eaten_by_imq_dev;
++
++	spin_lock_bh(qdisc_lock(q));
++
++	users = atomic_read(&skb->users);
++
++	skb_shared = skb_get(skb); /* increase reference count by one */
++	skb_save_cb(skb_shared); /* backup skb->cb, as qdisc layer will
++					overwrite it */
++	qdisc_enqueue_root(skb_shared, q); /* might kfree_skb */
++
++	if (likely(atomic_read(&skb_shared->users) == users + 1)) {
++		kfree_skb(skb_shared); /* decrease reference count by one */
++
++		skb->destructor = &imq_skb_destructor;
++
++		/* cloned? */
++		if (skb_orig)
++			kfree_skb(skb_orig); /* free original */
++
++		spin_unlock_bh(qdisc_lock(q));
++
++		/* schedule qdisc dequeue */
++		__netif_schedule(q);
++
++		retval = 0;
++		goto out;
++	} else {
++		skb_restore_cb(skb_shared); /* restore skb->cb */
++		skb->nf_queue_entry = NULL;
++		/* qdisc dropped packet and decreased skb reference count of
++		 * skb, so we don't really want to and try refree as that would
++		 * actually destroy the skb. */
++		spin_unlock_bh(qdisc_lock(q));
++		goto packet_not_eaten_by_imq_dev;
++	}
++
++packet_not_eaten_by_imq_dev:
++	/* cloned? restore original */
++	if (skb_orig) {
++		kfree_skb(skb);
++		entry->skb = skb_orig;
++	}
++	retval = -1;
++out:
++	return retval;
++}
++
++static struct nf_queue_handler nfqh = {
++	.name  = "imq",
++	.outfn = imq_nf_queue,
++};
++
++static unsigned int imq_nf_hook(unsigned int hook, struct sk_buff *pskb,
++				const struct net_device *indev,
++				const struct net_device *outdev,
++				int (*okfn)(struct sk_buff *))
++{
++	if (pskb->imq_flags & IMQ_F_ENQUEUE)
++		return NF_QUEUE;
++
++	return NF_ACCEPT;
++}
++
++static int imq_close(struct net_device *dev)
++{
++	netif_stop_queue(dev);
++	return 0;
++}
++
++static int imq_open(struct net_device *dev)
++{
++	netif_start_queue(dev);
++	return 0;
++}
++
++static const struct net_device_ops imq_netdev_ops = {
++	.ndo_open		= imq_open,
++	.ndo_stop		= imq_close,
++	.ndo_start_xmit		= imq_dev_xmit,
++	.ndo_get_stats		= imq_get_stats,
++};
++
++static void imq_setup(struct net_device *dev)
++{
++	dev->netdev_ops		= &imq_netdev_ops;
++	dev->type               = ARPHRD_VOID;
++	dev->mtu                = 16000;
++	dev->tx_queue_len       = 11000;
++	dev->flags              = IFF_NOARP;
++	dev->features           = NETIF_F_SG | NETIF_F_FRAGLIST |
++				  NETIF_F_GSO | NETIF_F_HW_CSUM |
++				  NETIF_F_HIGHDMA;
++	dev->priv_flags		&= ~IFF_XMIT_DST_RELEASE;
++}
++
++static int imq_validate(struct nlattr *tb[], struct nlattr *data[])
++{
++	int ret = 0;
++
++	if (tb[IFLA_ADDRESS]) {
++		if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN) {
++			ret = -EINVAL;
++			goto end;
++		}
++		if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS]))) {
++			ret = -EADDRNOTAVAIL;
++			goto end;
++		}
++	}
++	return 0;
++end:
++	printk(KERN_WARNING "IMQ: imq_validate failed (%d)\n", ret);
++	return ret;
++}
++
++static struct rtnl_link_ops imq_link_ops __read_mostly = {
++	.kind		= "imq",
++	.priv_size	= 0,
++	.setup		= imq_setup,
++	.validate	= imq_validate,
++};
++
++static int __init imq_init_hooks(void)
++{
++	int err;
++
++	nf_register_queue_imq_handler(&nfqh);
++
++	err = nf_register_hook(&imq_ingress_ipv4);
++	if (err)
++		goto err1;
++
++	err = nf_register_hook(&imq_egress_ipv4);
++	if (err)
++		goto err2;
++
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++	err = nf_register_hook(&imq_ingress_ipv6);
++	if (err)
++		goto err3;
++
++	err = nf_register_hook(&imq_egress_ipv6);
++	if (err)
++		goto err4;
++#endif
++
++	return 0;
++
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++err4:
++	nf_unregister_hook(&imq_ingress_ipv6);
++err3:
++	nf_unregister_hook(&imq_egress_ipv4);
++#endif
++err2:
++	nf_unregister_hook(&imq_ingress_ipv4);
++err1:
++	nf_unregister_queue_imq_handler();
++	return err;
++}
++
++static int __init imq_init_one(int index)
++{
++	struct net_device *dev;
++	int ret;
++
++	dev = alloc_netdev(0, "imq%d", imq_setup);
++	if (!dev)
++		return -ENOMEM;
++
++	ret = dev_alloc_name(dev, dev->name);
++	if (ret < 0)
++		goto fail;
++
++	dev->rtnl_link_ops = &imq_link_ops;
++	ret = register_netdevice(dev);
++	if (ret < 0)
++		goto fail;
++
++	return 0;
++fail:
++	free_netdev(dev);
++	return ret;
++}
++
++static int __init imq_init_devs(void)
++{
++	int err, i;
++
++	if (numdevs < 1 || numdevs > IMQ_MAX_DEVS) {
++		printk(KERN_ERR "IMQ: numdevs has to be betweed 1 and %u\n",
++		       IMQ_MAX_DEVS);
++		return -EINVAL;
++	}
++
++	rtnl_lock();
++	err = __rtnl_link_register(&imq_link_ops);
++
++	for (i = 0; i < numdevs && !err; i++)
++		err = imq_init_one(i);
++
++	if (err) {
++		__rtnl_link_unregister(&imq_link_ops);
++		memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
++	}
++	rtnl_unlock();
++
++	return err;
++}
++
++static int __init imq_init_module(void)
++{
++	int err;
++
++#if defined(CONFIG_IMQ_NUM_DEVS)
++	BUILD_BUG_ON(CONFIG_IMQ_NUM_DEVS > 16);
++	BUILD_BUG_ON(CONFIG_IMQ_NUM_DEVS < 2);
++	BUILD_BUG_ON(CONFIG_IMQ_NUM_DEVS - 1 > IMQ_F_IFMASK);
++#endif
++
++	err = imq_init_devs();
++	if (err) {
++		printk(KERN_ERR "IMQ: Error trying imq_init_devs(net)\n");
++		return err;
++	}
++
++	err = imq_init_hooks();
++	if (err) {
++		printk(KERN_ERR "IMQ: Error trying imq_init_hooks()\n");
++		rtnl_link_unregister(&imq_link_ops);
++		memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
++		return err;
++	}
++
++	printk(KERN_INFO "IMQ driver loaded successfully.\n");
++
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++	printk(KERN_INFO "\tHooking IMQ before NAT on PREROUTING.\n");
++#else
++	printk(KERN_INFO "\tHooking IMQ after NAT on PREROUTING.\n");
++#endif
++#if defined(CONFIG_IMQ_BEHAVIOR_AB) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++	printk(KERN_INFO "\tHooking IMQ before NAT on POSTROUTING.\n");
++#else
++	printk(KERN_INFO "\tHooking IMQ after NAT on POSTROUTING.\n");
++#endif
++
++	return 0;
++}
++
++static void __exit imq_unhook(void)
++{
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++	nf_unregister_hook(&imq_ingress_ipv6);
++	nf_unregister_hook(&imq_egress_ipv6);
++#endif
++	nf_unregister_hook(&imq_ingress_ipv4);
++	nf_unregister_hook(&imq_egress_ipv4);
++
++	nf_unregister_queue_imq_handler();
++}
++
++static void __exit imq_cleanup_devs(void)
++{
++	rtnl_link_unregister(&imq_link_ops);
++	memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
++}
++
++static void __exit imq_exit_module(void)
++{
++	imq_unhook();
++	imq_cleanup_devs();
++	printk(KERN_INFO "IMQ driver unloaded successfully.\n");
++}
++
++module_init(imq_init_module);
++module_exit(imq_exit_module);
++
++module_param(numdevs, int, 0);
++MODULE_PARM_DESC(numdevs, "number of IMQ devices (how many imq* devices will "
++			"be created)");
++MODULE_AUTHOR("http://www.linuximq.net");
++MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See "
++			"http://www.linuximq.net/ for more information.");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS_RTNL_LINK("imq");
++
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -121,6 +121,129 @@ config EQUALIZER
+ 	  To compile this driver as a module, choose M here: the module
+ 	  will be called eql.  If unsure, say N.
+ 
++config IMQ
++	tristate "IMQ (intermediate queueing device) support"
++	depends on NETDEVICES && NETFILTER
++	---help---
++	  The IMQ device(s) is used as placeholder for QoS queueing
++	  disciplines. Every packet entering/leaving the IP stack can be
++	  directed through the IMQ device where it's enqueued/dequeued to the
++	  attached qdisc. This allows you to treat network devices as classes
++	  and distribute bandwidth among them. Iptables is used to specify
++	  through which IMQ device, if any, packets travel.
++
++	  More information at: http://www.linuximq.net/
++
++	  To compile this driver as a module, choose M here: the module
++	  will be called imq.  If unsure, say N.
++
++choice
++	prompt "IMQ behavior (PRE/POSTROUTING)"
++	depends on IMQ
++	default IMQ_BEHAVIOR_AB
++	help
++
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		IMQ can work in any of the following ways:
++
++		    PREROUTING   |      POSTROUTING
++		-----------------|-------------------
++		#1  After NAT    |      After NAT
++		#2  After NAT    |      Before NAT
++		#3  Before NAT   |      After NAT
++		#4  Before NAT   |      Before NAT
++
++		The default behavior is to hook before NAT on PREROUTING
++		and after NAT on POSTROUTING (#3).
++
++		This settings are specially usefull when trying to use IMQ
++		to shape NATed clients.
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_AA
++	bool "IMQ AA"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   After NAT
++		POSTROUTING:  After NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_AB
++	bool "IMQ AB"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   After NAT
++		POSTROUTING:  Before NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_BA
++	bool "IMQ BA"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   Before NAT
++		POSTROUTING:  After NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_BB
++	bool "IMQ BB"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   Before NAT
++		POSTROUTING:  Before NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++endchoice
++
++config IMQ_NUM_DEVS
++
++	int "Number of IMQ devices"
++	range 2 16
++	depends on IMQ
++	default "16"
++	help
++
++		This settings defines how many IMQ devices will be
++		created.
++
++		The default value is 16.
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
+ config TUN
+ 	tristate "Universal TUN/TAP device driver support"
+ 	select CRC32
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -169,6 +169,7 @@ obj-$(CONFIG_SLHC) += slhc.o
+ obj-$(CONFIG_XEN_NETDEV_FRONTEND) += xen-netfront.o
+ 
+ obj-$(CONFIG_DUMMY) += dummy.o
++obj-$(CONFIG_IMQ) += imq.o
+ obj-$(CONFIG_IFB) += ifb.o
+ obj-$(CONFIG_MACVLAN) += macvlan.o
+ obj-$(CONFIG_MACVTAP) += macvtap.o
+--- /dev/null
++++ b/include/linux/imq.h
+@@ -0,0 +1,13 @@
++#ifndef _IMQ_H
++#define _IMQ_H
++
++/* IFMASK (16 device indexes, 0 to 15) and flag(s) fit in 5 bits */
++#define IMQ_F_BITS	5
++
++#define IMQ_F_IFMASK	0x0f
++#define IMQ_F_ENQUEUE	0x10
++
++#define IMQ_MAX_DEVS	(IMQ_F_IFMASK + 1)
++
++#endif /* _IMQ_H */
++
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -1203,6 +1203,7 @@ extern int		dev_alloc_name(struct net_de
+ extern int		dev_open(struct net_device *dev);
+ extern int		dev_close(struct net_device *dev);
+ extern void		dev_disable_lro(struct net_device *dev);
++extern struct netdev_queue *dev_pick_tx(struct net_device *dev, struct sk_buff *skb);
+ extern int		dev_queue_xmit(struct sk_buff *skb);
+ extern int		register_netdevice(struct net_device *dev);
+ extern void		unregister_netdevice_queue(struct net_device *dev,
+--- /dev/null
++++ b/include/linux/netfilter/xt_IMQ.h
+@@ -0,0 +1,9 @@
++#ifndef _XT_IMQ_H
++#define _XT_IMQ_H
++
++struct xt_imq_info {
++	unsigned int todev;     /* target imq device */
++};
++
++#endif /* _XT_IMQ_H */
++
+--- /dev/null
++++ b/include/linux/netfilter_ipv4/ipt_IMQ.h
+@@ -0,0 +1,10 @@
++#ifndef _IPT_IMQ_H
++#define _IPT_IMQ_H
++
++/* Backwards compatibility for old userspace */
++#include <linux/netfilter/xt_IMQ.h>
++
++#define ipt_imq_info xt_imq_info
++
++#endif /* _IPT_IMQ_H */
++
+--- /dev/null
++++ b/include/linux/netfilter_ipv6/ip6t_IMQ.h
+@@ -0,0 +1,10 @@
++#ifndef _IP6T_IMQ_H
++#define _IP6T_IMQ_H
++
++/* Backwards compatibility for old userspace */
++#include <linux/netfilter/xt_IMQ.h>
++
++#define ip6t_imq_info xt_imq_info
++
++#endif /* _IP6T_IMQ_H */
++
+--- a/include/linux/skbuff.h
++++ b/include/linux/skbuff.h
+@@ -29,6 +29,9 @@
+ #include <linux/rcupdate.h>
+ #include <linux/dmaengine.h>
+ #include <linux/hrtimer.h>
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++#include <linux/imq.h>
++#endif
+ 
+ /* Don't change this without changing skb_csum_unnecessary! */
+ #define CHECKSUM_NONE 0
+@@ -321,6 +324,9 @@ struct sk_buff {
+ 	 * first. This is owned by whoever has the skb queued ATM.
+ 	 */
+ 	char			cb[48] __aligned(8);
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	void                    *cb_next;
++#endif
+ 
+ 	unsigned long		_skb_dst;
+ #ifdef CONFIG_XFRM
+@@ -357,6 +363,9 @@ struct sk_buff {
+ 	struct nf_conntrack	*nfct;
+ 	struct sk_buff		*nfct_reasm;
+ #endif
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	struct nf_queue_entry	*nf_queue_entry;
++#endif
+ #ifdef CONFIG_BRIDGE_NETFILTER
+ 	struct nf_bridge_info	*nf_bridge;
+ #endif
+@@ -378,6 +387,10 @@ struct sk_buff {
+ 
+ 	/* 0/14 bit hole */
+ 
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	__u8			imq_flags:IMQ_F_BITS;
++#endif
++
+ #ifdef CONFIG_NET_DMA
+ 	dma_cookie_t		dma_cookie;
+ #endif
+@@ -426,6 +439,12 @@ static inline struct rtable *skb_rtable(
+ 	return (struct rtable *)skb_dst(skb);
+ }
+ 
++
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++extern int skb_save_cb(struct sk_buff *skb);
++extern int skb_restore_cb(struct sk_buff *skb);
++#endif
++
+ extern void kfree_skb(struct sk_buff *skb);
+ extern void consume_skb(struct sk_buff *skb);
+ extern void	       __kfree_skb(struct sk_buff *skb);
+@@ -1970,6 +1989,10 @@ static inline void __nf_copy(struct sk_b
+ 	dst->nfct_reasm = src->nfct_reasm;
+ 	nf_conntrack_get_reasm(src->nfct_reasm);
+ #endif
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	dst->imq_flags = src->imq_flags;
++	dst->nf_queue_entry = src->nf_queue_entry;
++#endif
+ #ifdef CONFIG_BRIDGE_NETFILTER
+ 	dst->nf_bridge  = src->nf_bridge;
+ 	nf_bridge_get(src->nf_bridge);
+--- a/include/net/netfilter/nf_queue.h
++++ b/include/net/netfilter/nf_queue.h
+@@ -13,6 +13,12 @@ struct nf_queue_entry {
+ 	struct net_device	*indev;
+ 	struct net_device	*outdev;
+ 	int			(*okfn)(struct sk_buff *);
++
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	int			(*next_outfn)(struct nf_queue_entry *entry,
++					      unsigned int queuenum);
++	unsigned int		next_queuenum;
++#endif
+ };
+ 
+ #define nf_queue_entry_reroute(x) ((void *)x + sizeof(struct nf_queue_entry))
+@@ -30,5 +36,11 @@ extern int nf_unregister_queue_handler(u
+ 				       const struct nf_queue_handler *qh);
+ extern void nf_unregister_queue_handlers(const struct nf_queue_handler *qh);
+ extern void nf_reinject(struct nf_queue_entry *entry, unsigned int verdict);
++extern void nf_queue_entry_release_refs(struct nf_queue_entry *entry);
++
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++extern void nf_register_queue_imq_handler(const struct nf_queue_handler *qh);
++extern void nf_unregister_queue_imq_handler(void);
++#endif
+ 
+ #endif /* _NF_QUEUE_H */
+--- a/net/core/dev.c
++++ b/net/core/dev.c
+@@ -98,6 +98,9 @@
+ #include <net/net_namespace.h>
+ #include <net/sock.h>
+ #include <linux/rtnetlink.h>
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++#include <linux/imq.h>
++#endif
+ #include <linux/proc_fs.h>
+ #include <linux/seq_file.h>
+ #include <linux/stat.h>
+@@ -1859,7 +1862,11 @@ int dev_hard_start_xmit(struct sk_buff *
+ 	int rc = NETDEV_TX_OK;
+ 
+ 	if (likely(!skb->next)) {
+-		if (!list_empty(&ptype_all))
++		if (!list_empty(&ptype_all)
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++		    && !(skb->imq_flags & IMQ_F_ENQUEUE)
++#endif
++		    )
+ 			dev_queue_xmit_nit(skb, dev);
+ 
+ 		if (netif_needs_gso(dev, skb)) {
+@@ -1969,8 +1976,7 @@ static inline u16 dev_cap_txqueue(struct
+ 	return queue_index;
+ }
+ 
+-static struct netdev_queue *dev_pick_tx(struct net_device *dev,
+-					struct sk_buff *skb)
++struct netdev_queue *dev_pick_tx(struct net_device *dev, struct sk_buff *skb)
+ {
+ 	u16 queue_index;
+ 	struct sock *sk = skb->sk;
+@@ -2000,6 +2006,7 @@ static struct netdev_queue *dev_pick_tx(
+ 	skb_set_queue_mapping(skb, queue_index);
+ 	return netdev_get_tx_queue(dev, queue_index);
+ }
++EXPORT_SYMBOL(dev_pick_tx);
+ 
+ static inline int __dev_xmit_skb(struct sk_buff *skb, struct Qdisc *q,
+ 				 struct net_device *dev,
+--- a/net/core/skbuff.c
++++ b/net/core/skbuff.c
+@@ -72,6 +72,9 @@
+ 
+ static struct kmem_cache *skbuff_head_cache __read_mostly;
+ static struct kmem_cache *skbuff_fclone_cache __read_mostly;
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++static struct kmem_cache *skbuff_cb_store_cache __read_mostly;
++#endif
+ 
+ static void sock_pipe_buf_release(struct pipe_inode_info *pipe,
+ 				  struct pipe_buffer *buf)
+@@ -91,6 +94,83 @@ static int sock_pipe_buf_steal(struct pi
+ 	return 1;
+ }
+ 
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++/* Control buffer save/restore for IMQ devices */
++struct skb_cb_table {
++	void			*cb_next;
++	atomic_t		refcnt;
++	char      		cb[48];
++};
++
++static DEFINE_SPINLOCK(skb_cb_store_lock);
++
++int skb_save_cb(struct sk_buff *skb)
++{
++	struct skb_cb_table *next;
++
++	next = kmem_cache_alloc(skbuff_cb_store_cache, GFP_ATOMIC);
++	if (!next)
++		return -ENOMEM;
++
++	BUILD_BUG_ON(sizeof(skb->cb) != sizeof(next->cb));
++
++	memcpy(next->cb, skb->cb, sizeof(skb->cb));
++	next->cb_next = skb->cb_next;
++
++	atomic_set(&next->refcnt, 1);
++
++	skb->cb_next = next;
++	return 0;
++}
++EXPORT_SYMBOL(skb_save_cb);
++
++int skb_restore_cb(struct sk_buff *skb)
++{
++	struct skb_cb_table *next;
++
++	if (!skb->cb_next)
++		return 0;
++
++	next = skb->cb_next;
++
++	BUILD_BUG_ON(sizeof(skb->cb) != sizeof(next->cb));
++
++	memcpy(skb->cb, next->cb, sizeof(skb->cb));
++	skb->cb_next = next->cb_next;
++
++	spin_lock(&skb_cb_store_lock);
++
++	if (atomic_dec_and_test(&next->refcnt)) {
++		kmem_cache_free(skbuff_cb_store_cache, next);
++	}
++
++	spin_unlock(&skb_cb_store_lock);
++
++	return 0;
++}
++EXPORT_SYMBOL(skb_restore_cb);
++
++static void skb_copy_stored_cb(struct sk_buff *new, const struct sk_buff *__old)
++{
++	struct skb_cb_table *next;
++	struct sk_buff *old;
++
++	if (!__old->cb_next) {
++		new->cb_next = NULL;
++		return;
++	}
++
++	spin_lock(&skb_cb_store_lock);
++
++	old = (struct sk_buff *)__old;
++
++	next = old->cb_next;
++	atomic_inc(&next->refcnt);
++	new->cb_next = next;
++
++	spin_unlock(&skb_cb_store_lock);
++}
++#endif
+ 
+ /* Pipe buffer operations for a socket. */
+ static const struct pipe_buf_operations sock_pipe_buf_ops = {
+@@ -398,6 +478,26 @@ static void skb_release_head_state(struc
+ 		WARN_ON(in_irq());
+ 		skb->destructor(skb);
+ 	}
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	/* This should not happen. When it does, avoid memleak by restoring
++	the chain of cb-backups. */
++	while(skb->cb_next != NULL) {
++		if (net_ratelimit())
++			printk(KERN_WARNING "IMQ: kfree_skb: skb->cb_next: "
++				"%08x\n", (unsigned int)skb->cb_next);
++
++		skb_restore_cb(skb);
++	}
++	/* This should not happen either, nf_queue_entry is nullified in
++	 * imq_dev_xmit(). If we have non-NULL nf_queue_entry then we are
++	 * leaking entry pointers, maybe memory. We don't know if this is
++	 * pointer to already freed memory, or should this be freed.
++	 * If this happens we need to add refcounting, etc for nf_queue_entry.
++	 */
++	if (skb->nf_queue_entry && net_ratelimit())
++		printk(KERN_WARNING
++				"IMQ: kfree_skb: skb->nf_queue_entry != NULL");
++#endif
+ #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
+ 	nf_conntrack_put(skb->nfct);
+ 	nf_conntrack_put_reasm(skb->nfct_reasm);
+@@ -538,6 +638,9 @@ static void __copy_skb_header(struct sk_
+ 	new->sp			= secpath_get(old->sp);
+ #endif
+ 	memcpy(new->cb, old->cb, sizeof(old->cb));
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	skb_copy_stored_cb(new, old);
++#endif
+ 	new->csum		= old->csum;
+ 	new->local_df		= old->local_df;
+ 	new->pkt_type		= old->pkt_type;
+@@ -2779,6 +2882,13 @@ void __init skb_init(void)
+ 						0,
+ 						SLAB_HWCACHE_ALIGN|SLAB_PANIC,
+ 						NULL);
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	skbuff_cb_store_cache = kmem_cache_create("skbuff_cb_store_cache",
++						  sizeof(struct skb_cb_table),
++						  0,
++						  SLAB_HWCACHE_ALIGN|SLAB_PANIC,
++						  NULL);
++#endif
+ }
+ 
+ /**
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -421,6 +421,18 @@ config NETFILTER_XT_TARGET_LED
+ 	  For more information on the LEDs available on your system, see
+ 	  Documentation/leds-class.txt
+ 
++config NETFILTER_XT_TARGET_IMQ
++        tristate '"IMQ" target support'
++	depends on NETFILTER_XTABLES
++	depends on IP_NF_MANGLE || IP6_NF_MANGLE
++	select IMQ
++	default m if NETFILTER_ADVANCED=n
++        help
++          This option adds a `IMQ' target which is used to specify if and
++          to which imq device packets should get enqueued/dequeued.
++
++          To compile it as a module, choose M here.  If unsure, say N.
++
+ config NETFILTER_XT_TARGET_MARK
+ 	tristate '"MARK" target support'
+ 	default m if NETFILTER_ADVANCED=n
+--- a/net/netfilter/Makefile
++++ b/net/netfilter/Makefile
+@@ -47,6 +47,7 @@ obj-$(CONFIG_NETFILTER_XT_TARGET_CONNSEC
+ obj-$(CONFIG_NETFILTER_XT_TARGET_CT) += xt_CT.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_DSCP) += xt_DSCP.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_HL) += xt_HL.o
++obj-$(CONFIG_NETFILTER_XT_TARGET_IMQ) += xt_IMQ.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_LED) += xt_LED.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_MARK) += xt_MARK.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_NFLOG) += xt_NFLOG.o
+--- a/net/netfilter/nf_queue.c
++++ b/net/netfilter/nf_queue.c
+@@ -21,6 +21,26 @@ static const struct nf_queue_handler *qu
+ 
+ static DEFINE_MUTEX(queue_handler_mutex);
+ 
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++static const struct nf_queue_handler *queue_imq_handler;
++
++void nf_register_queue_imq_handler(const struct nf_queue_handler *qh)
++{
++	mutex_lock(&queue_handler_mutex);
++	rcu_assign_pointer(queue_imq_handler, qh);
++	mutex_unlock(&queue_handler_mutex);
++}
++EXPORT_SYMBOL(nf_register_queue_imq_handler);
++
++void nf_unregister_queue_imq_handler(void)
++{
++	mutex_lock(&queue_handler_mutex);
++	rcu_assign_pointer(queue_imq_handler, NULL);
++	mutex_unlock(&queue_handler_mutex);
++}
++EXPORT_SYMBOL(nf_unregister_queue_imq_handler);
++#endif
++
+ /* return EBUSY when somebody else is registered, return EEXIST if the
+  * same handler is registered, return 0 in case of success. */
+ int nf_register_queue_handler(u_int8_t pf, const struct nf_queue_handler *qh)
+@@ -81,7 +101,7 @@ void nf_unregister_queue_handlers(const
+ }
+ EXPORT_SYMBOL_GPL(nf_unregister_queue_handlers);
+ 
+-static void nf_queue_entry_release_refs(struct nf_queue_entry *entry)
++void nf_queue_entry_release_refs(struct nf_queue_entry *entry)
+ {
+ 	/* Release those devices we held, or Alexey will kill me. */
+ 	if (entry->indev)
+@@ -101,6 +121,7 @@ static void nf_queue_entry_release_refs(
+ 	/* Drop reference to owner of hook which queued us. */
+ 	module_put(entry->elem->owner);
+ }
++EXPORT_SYMBOL_GPL(nf_queue_entry_release_refs);
+ 
+ /*
+  * Any packet that leaves via this function must come back
+@@ -122,12 +143,26 @@ static int __nf_queue(struct sk_buff *sk
+ #endif
+ 	const struct nf_afinfo *afinfo;
+ 	const struct nf_queue_handler *qh;
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	const struct nf_queue_handler *qih = NULL;
++#endif
+ 
+ 	/* QUEUE == DROP if noone is waiting, to be safe. */
+ 	rcu_read_lock();
+ 
+ 	qh = rcu_dereference(queue_handler[pf]);
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++	if (pf == PF_INET || pf == PF_INET6)
++#else
++	if (pf == PF_INET)
++#endif
++		qih = rcu_dereference(queue_imq_handler);
++
++	if (!qh && !qih)
++#else /* !IMQ */
+ 	if (!qh)
++#endif
+ 		goto err_unlock;
+ 
+ 	afinfo = nf_get_afinfo(pf);
+@@ -146,6 +181,10 @@ static int __nf_queue(struct sk_buff *sk
+ 		.indev	= indev,
+ 		.outdev	= outdev,
+ 		.okfn	= okfn,
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++		.next_outfn = qh ? qh->outfn : NULL,
++		.next_queuenum = queuenum,
++#endif
+ 	};
+ 
+ 	/* If it's going away, ignore hook. */
+@@ -171,8 +210,19 @@ static int __nf_queue(struct sk_buff *sk
+ 	}
+ #endif
+ 	afinfo->saveroute(skb, entry);
++
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++	if (qih) {
++		status = qih->outfn(entry, queuenum);
++		goto imq_skip_queue;
++	}
++#endif
++
+ 	status = qh->outfn(entry, queuenum);
+ 
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++imq_skip_queue:
++#endif
+ 	rcu_read_unlock();
+ 
+ 	if (status < 0) {
+--- /dev/null
++++ b/net/netfilter/xt_IMQ.c
+@@ -0,0 +1,73 @@
++/*
++ * This target marks packets to be enqueued to an imq device
++ */
++#include <linux/module.h>
++#include <linux/skbuff.h>
++#include <linux/netfilter/x_tables.h>
++#include <linux/netfilter/xt_IMQ.h>
++#include <linux/imq.h>
++
++static unsigned int imq_target(struct sk_buff *pskb,
++				const struct xt_target_param *par)
++{
++	const struct xt_imq_info *mr = par->targinfo;
++
++	pskb->imq_flags = (mr->todev & IMQ_F_IFMASK) | IMQ_F_ENQUEUE;
++
++	return XT_CONTINUE;
++}
++
++static bool imq_checkentry(const struct xt_tgchk_param *par)
++{
++	struct xt_imq_info *mr = par->targinfo;
++
++	if (mr->todev > IMQ_MAX_DEVS - 1) {
++		printk(KERN_WARNING
++		       "IMQ: invalid device specified, highest is %u\n",
++		       IMQ_MAX_DEVS - 1);
++		return 0;
++	}
++
++	return 1;
++}
++
++static struct xt_target xt_imq_reg[] __read_mostly = {
++	{
++		.name           = "IMQ",
++		.family		= AF_INET,
++		.checkentry     = imq_checkentry,
++		.target         = imq_target,
++		.targetsize	= sizeof(struct xt_imq_info),
++		.table		= "mangle",
++		.me             = THIS_MODULE
++	},
++	{
++		.name           = "IMQ",
++		.family		= AF_INET6,
++		.checkentry     = imq_checkentry,
++		.target         = imq_target,
++		.targetsize	= sizeof(struct xt_imq_info),
++		.table		= "mangle",
++		.me             = THIS_MODULE
++	},
++};
++
++static int __init imq_init(void)
++{
++	return xt_register_targets(xt_imq_reg, ARRAY_SIZE(xt_imq_reg));
++}
++
++static void __exit imq_fini(void)
++{
++	xt_unregister_targets(xt_imq_reg, ARRAY_SIZE(xt_imq_reg));
++}
++
++module_init(imq_init);
++module_exit(imq_fini);
++
++MODULE_AUTHOR("http://www.linuximq.net");
++MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See http://www.linuximq.net/ for more information.");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("ipt_IMQ");
++MODULE_ALIAS("ip6t_IMQ");
++
diff --git a/target/linux/generic/patches-2.6.34/180-netfilter_depends.patch b/target/linux/generic/patches-2.6.34/180-netfilter_depends.patch
new file mode 100644
index 0000000000..1bda13d191
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/180-netfilter_depends.patch
@@ -0,0 +1,18 @@
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -173,7 +173,6 @@ config NF_CONNTRACK_FTP
+ 
+ config NF_CONNTRACK_H323
+ 	tristate "H.323 protocol support"
+-	depends on (IPV6 || IPV6=n)
+ 	depends on NETFILTER_ADVANCED
+ 	help
+ 	  H.323 is a VoIP signalling protocol from ITU-T. As one of the most
+@@ -530,7 +529,6 @@ config NETFILTER_XT_TARGET_SECMARK
+ 
+ config NETFILTER_XT_TARGET_TCPMSS
+ 	tristate '"TCPMSS" target support'
+-	depends on (IPV6 || IPV6=n)
+ 	default m if NETFILTER_ADVANCED=n
+ 	---help---
+ 	  This option adds a `TCPMSS' target, which allows you to alter the
diff --git a/target/linux/generic/patches-2.6.34/190-netfilter_rtsp.patch b/target/linux/generic/patches-2.6.34/190-netfilter_rtsp.patch
new file mode 100644
index 0000000000..68792936bb
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/190-netfilter_rtsp.patch
@@ -0,0 +1,1366 @@
+--- /dev/null
++++ b/include/linux/netfilter/nf_conntrack_rtsp.h
+@@ -0,0 +1,63 @@
++/*
++ * RTSP extension for IP connection tracking.
++ * (C) 2003 by Tom Marshall <tmarshall at real.com>
++ * based on ip_conntrack_irc.h
++ *
++ *      This program is free software; you can redistribute it and/or
++ *      modify it under the terms of the GNU General Public License
++ *      as published by the Free Software Foundation; either version
++ *      2 of the License, or (at your option) any later version.
++ */
++#ifndef _IP_CONNTRACK_RTSP_H
++#define _IP_CONNTRACK_RTSP_H
++
++//#define IP_NF_RTSP_DEBUG 1
++#define IP_NF_RTSP_VERSION "0.6.21"
++
++#ifdef __KERNEL__
++/* port block types */
++typedef enum {
++    pb_single,  /* client_port=x */
++    pb_range,   /* client_port=x-y */
++    pb_discon   /* client_port=x/y (rtspbis) */
++} portblock_t;
++
++/* We record seq number and length of rtsp headers here, all in host order. */
++
++/*
++ * This structure is per expected connection.  It is a member of struct
++ * ip_conntrack_expect.  The TCP SEQ for the conntrack expect is stored
++ * there and we are expected to only store the length of the data which
++ * needs replaced.  If a packet contains multiple RTSP messages, we create
++ * one expected connection per message.
++ *
++ * We use these variables to mark the entire header block.  This may seem
++ * like overkill, but the nature of RTSP requires it.  A header may appear
++ * multiple times in a message.  We must treat two Transport headers the
++ * same as one Transport header with two entries.
++ */
++struct ip_ct_rtsp_expect
++{
++    u_int32_t   len;        /* length of header block */
++    portblock_t pbtype;     /* Type of port block that was requested */
++    u_int16_t   loport;     /* Port that was requested, low or first */
++    u_int16_t   hiport;     /* Port that was requested, high or second */
++#if 0
++    uint        method;     /* RTSP method */
++    uint        cseq;       /* CSeq from request */
++#endif
++};
++
++extern unsigned int (*nf_nat_rtsp_hook)(struct sk_buff *skb,
++				 enum ip_conntrack_info ctinfo,
++				 unsigned int matchoff, unsigned int matchlen,
++				 struct ip_ct_rtsp_expect *prtspexp,
++				 struct nf_conntrack_expect *exp);
++
++extern void (*nf_nat_rtsp_hook_expectfn)(struct nf_conn *ct, struct nf_conntrack_expect *exp);
++
++#define RTSP_PORT   554
++
++#endif /* __KERNEL__ */
++
++#endif /* _IP_CONNTRACK_RTSP_H */
+--- /dev/null
++++ b/include/linux/netfilter_helpers.h
+@@ -0,0 +1,133 @@
++/*
++ * Helpers for netfiler modules.  This file provides implementations for basic
++ * functions such as strncasecmp(), etc.
++ *
++ * gcc will warn for defined but unused functions, so we only include the
++ * functions requested.  The following macros are used:
++ *   NF_NEED_STRNCASECMP        nf_strncasecmp()
++ *   NF_NEED_STRTOU16           nf_strtou16()
++ *   NF_NEED_STRTOU32           nf_strtou32()
++ */
++#ifndef _NETFILTER_HELPERS_H
++#define _NETFILTER_HELPERS_H
++
++/* Only include these functions for kernel code. */
++#ifdef __KERNEL__
++
++#include <linux/ctype.h>
++#define iseol(c) ( (c) == '\r' || (c) == '\n' )
++
++/*
++ * The standard strncasecmp()
++ */
++#ifdef NF_NEED_STRNCASECMP
++static int
++nf_strncasecmp(const char* s1, const char* s2, u_int32_t len)
++{
++    if (s1 == NULL || s2 == NULL)
++    {
++        if (s1 == NULL && s2 == NULL)
++        {
++            return 0;
++        }
++        return (s1 == NULL) ? -1 : 1;
++    }
++    while (len > 0 && tolower(*s1) == tolower(*s2))
++    {
++        len--;
++        s1++;
++        s2++;
++    }
++    return ( (len == 0) ? 0 : (tolower(*s1) - tolower(*s2)) );
++}
++#endif /* NF_NEED_STRNCASECMP */
++
++/*
++ * Parse a string containing a 16-bit unsigned integer.
++ * Returns the number of chars used, or zero if no number is found.
++ */
++#ifdef NF_NEED_STRTOU16
++static int
++nf_strtou16(const char* pbuf, u_int16_t* pval)
++{
++    int n = 0;
++
++    *pval = 0;
++    while (isdigit(pbuf[n]))
++    {
++        *pval = (*pval * 10) + (pbuf[n] - '0');
++        n++;
++    }
++
++    return n;
++}
++#endif /* NF_NEED_STRTOU16 */
++
++/*
++ * Parse a string containing a 32-bit unsigned integer.
++ * Returns the number of chars used, or zero if no number is found.
++ */
++#ifdef NF_NEED_STRTOU32
++static int
++nf_strtou32(const char* pbuf, u_int32_t* pval)
++{
++    int n = 0;
++
++    *pval = 0;
++    while (pbuf[n] >= '0' && pbuf[n] <= '9')
++    {
++        *pval = (*pval * 10) + (pbuf[n] - '0');
++        n++;
++    }
++
++    return n;
++}
++#endif /* NF_NEED_STRTOU32 */
++
++/*
++ * Given a buffer and length, advance to the next line and mark the current
++ * line.
++ */
++#ifdef NF_NEED_NEXTLINE
++static int
++nf_nextline(char* p, uint len, uint* poff, uint* plineoff, uint* plinelen)
++{
++    uint    off = *poff;
++    uint    physlen = 0;
++
++    if (off >= len)
++    {
++        return 0;
++    }
++
++    while (p[off] != '\n')
++    {
++        if (len-off <= 1)
++        {
++            return 0;
++        }
++
++        physlen++;
++        off++;
++    }
++
++    /* if we saw a crlf, physlen needs adjusted */
++    if (physlen > 0 && p[off] == '\n' && p[off-1] == '\r')
++    {
++        physlen--;
++    }
++
++    /* advance past the newline */
++    off++;
++
++    *plineoff = *poff;
++    *plinelen = physlen;
++    *poff = off;
++
++    return 1;
++}
++#endif /* NF_NEED_NEXTLINE */
++
++#endif /* __KERNEL__ */
++
++#endif /* _NETFILTER_HELPERS_H */
+--- /dev/null
++++ b/include/linux/netfilter_mime.h
+@@ -0,0 +1,89 @@
++/*
++ * MIME functions for netfilter modules.  This file provides implementations
++ * for basic MIME parsing.  MIME headers are used in many protocols, such as
++ * HTTP, RTSP, SIP, etc.
++ *
++ * gcc will warn for defined but unused functions, so we only include the
++ * functions requested.  The following macros are used:
++ *   NF_NEED_MIME_NEXTLINE      nf_mime_nextline()
++ */
++#ifndef _NETFILTER_MIME_H
++#define _NETFILTER_MIME_H
++
++/* Only include these functions for kernel code. */
++#ifdef __KERNEL__
++
++#include <linux/ctype.h>
++
++/*
++ * Given a buffer and length, advance to the next line and mark the current
++ * line.  If the current line is empty, *plinelen will be set to zero.  If
++ * not, it will be set to the actual line length (including CRLF).
++ *
++ * 'line' in this context means logical line (includes LWS continuations).
++ * Returns 1 on success, 0 on failure.
++ */
++#ifdef NF_NEED_MIME_NEXTLINE
++static int
++nf_mime_nextline(char* p, uint len, uint* poff, uint* plineoff, uint* plinelen)
++{
++    uint    off = *poff;
++    uint    physlen = 0;
++    int     is_first_line = 1;
++
++    if (off >= len)
++    {
++        return 0;
++    }
++
++    do
++    {
++        while (p[off] != '\n')
++        {
++            if (len-off <= 1)
++            {
++                return 0;
++            }
++
++            physlen++;
++            off++;
++        }
++
++        /* if we saw a crlf, physlen needs adjusted */
++        if (physlen > 0 && p[off] == '\n' && p[off-1] == '\r')
++        {
++            physlen--;
++        }
++
++        /* advance past the newline */
++        off++;
++
++        /* check for an empty line */
++        if (physlen == 0)
++        {
++            break;
++        }
++
++        /* check for colon on the first physical line */
++        if (is_first_line)
++        {
++            is_first_line = 0;
++            if (memchr(p+(*poff), ':', physlen) == NULL)
++            {
++                return 0;
++            }
++        }
++    }
++    while (p[off] == ' ' || p[off] == '\t');
++
++    *plineoff = *poff;
++    *plinelen = (physlen == 0) ? 0 : (off - *poff);
++    *poff = off;
++
++    return 1;
++}
++#endif /* NF_NEED_MIME_NEXTLINE */
++
++#endif /* __KERNEL__ */
++
++#endif /* _NETFILTER_MIME_H */
+--- a/net/ipv4/netfilter/Makefile
++++ b/net/ipv4/netfilter/Makefile
+@@ -26,6 +26,7 @@ obj-$(CONFIG_NF_NAT_AMANDA) += nf_nat_am
+ obj-$(CONFIG_NF_NAT_FTP) += nf_nat_ftp.o
+ obj-$(CONFIG_NF_NAT_H323) += nf_nat_h323.o
+ obj-$(CONFIG_NF_NAT_IRC) += nf_nat_irc.o
++obj-$(CONFIG_NF_NAT_RTSP) += nf_nat_rtsp.o
+ obj-$(CONFIG_NF_NAT_PPTP) += nf_nat_pptp.o
+ obj-$(CONFIG_NF_NAT_SIP) += nf_nat_sip.o
+ obj-$(CONFIG_NF_NAT_SNMP_BASIC) += nf_nat_snmp_basic.o
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -280,6 +280,16 @@ config NF_CONNTRACK_TFTP
+ 
+ 	  To compile it as a module, choose M here.  If unsure, say N.
+ 
++config NF_CONNTRACK_RTSP
++	tristate "RTSP protocol support"
++	depends on NF_CONNTRACK
++	help
++		Support the RTSP protocol.  This allows UDP transports to be setup
++		properly, including RTP and RDT.
++
++		If you want to compile it as a module, say 'M' here and read
++		Documentation/modules.txt.  If unsure, say 'Y'.
++
+ config NF_CT_NETLINK
+ 	tristate 'Connection tracking netlink interface'
+ 	select NETFILTER_NETLINK
+--- a/net/netfilter/Makefile
++++ b/net/netfilter/Makefile
+@@ -33,6 +33,7 @@ obj-$(CONFIG_NF_CONNTRACK_PPTP) += nf_co
+ obj-$(CONFIG_NF_CONNTRACK_SANE) += nf_conntrack_sane.o
+ obj-$(CONFIG_NF_CONNTRACK_SIP) += nf_conntrack_sip.o
+ obj-$(CONFIG_NF_CONNTRACK_TFTP) += nf_conntrack_tftp.o
++obj-$(CONFIG_NF_CONNTRACK_RTSP) += nf_conntrack_rtsp.o
+ 
+ # transparent proxy support
+ obj-$(CONFIG_NETFILTER_TPROXY) += nf_tproxy_core.o
+--- a/net/ipv4/netfilter/Kconfig
++++ b/net/ipv4/netfilter/Kconfig
+@@ -257,6 +257,11 @@ config NF_NAT_IRC
+ 	depends on NF_CONNTRACK && NF_NAT
+ 	default NF_NAT && NF_CONNTRACK_IRC
+ 
++config NF_NAT_RTSP
++	tristate
++ 	depends on IP_NF_IPTABLES && NF_CONNTRACK && NF_NAT
++ 	default NF_NAT && NF_CONNTRACK_RTSP
++
+ config NF_NAT_TFTP
+ 	tristate
+ 	depends on NF_CONNTRACK && NF_NAT
+--- /dev/null
++++ b/net/netfilter/nf_conntrack_rtsp.c
+@@ -0,0 +1,517 @@
++/*
++ * RTSP extension for IP connection tracking
++ * (C) 2003 by Tom Marshall <tmarshall at real.com>
++ * based on ip_conntrack_irc.c
++ *
++ *      This program is free software; you can redistribute it and/or
++ *      modify it under the terms of the GNU General Public License
++ *      as published by the Free Software Foundation; either version
++ *      2 of the License, or (at your option) any later version.
++ *
++ * Module load syntax:
++ *   insmod nf_conntrack_rtsp.o ports=port1,port2,...port<MAX_PORTS>
++ *                              max_outstanding=n setup_timeout=secs
++ *
++ * If no ports are specified, the default will be port 554.
++ *
++ * With max_outstanding you can define the maximum number of not yet
++ * answered SETUP requests per RTSP session (default 8).
++ * With setup_timeout you can specify how long the system waits for
++ * an expected data channel (default 300 seconds).
++ *
++ * 2005-02-13: Harald Welte <laforge at netfilter.org>
++ * 	- port to 2.6
++ * 	- update to recent post-2.6.11 api changes
++ * 2006-09-14: Steven Van Acker <deepstar at singularity.be>
++ *      - removed calls to NAT code from conntrack helper: NAT no longer needed to use rtsp-conntrack
++ * 2007-04-18: Michael Guntsche <mike at it-loops.com>
++ * 			- Port to new NF API
++ */
++
++#include <linux/module.h>
++#include <linux/netfilter.h>
++#include <linux/ip.h>
++#include <linux/inet.h>
++#include <net/tcp.h>
++
++#include <net/netfilter/nf_conntrack.h>
++#include <net/netfilter/nf_conntrack_expect.h>
++#include <net/netfilter/nf_conntrack_helper.h>
++#include <linux/netfilter/nf_conntrack_rtsp.h>
++
++#define NF_NEED_STRNCASECMP
++#define NF_NEED_STRTOU16
++#define NF_NEED_STRTOU32
++#define NF_NEED_NEXTLINE
++#include <linux/netfilter_helpers.h>
++#define NF_NEED_MIME_NEXTLINE
++#include <linux/netfilter_mime.h>
++
++#include <linux/ctype.h>
++#define MAX_SIMUL_SETUP 8 /* XXX: use max_outstanding */
++#define INFOP(fmt, args...) printk(KERN_INFO "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
++#if 0
++#define DEBUGP(fmt, args...) printk(KERN_DEBUG "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
++#else
++#define DEBUGP(fmt, args...)
++#endif
++
++#define MAX_PORTS 8
++static int ports[MAX_PORTS];
++static int num_ports = 0;
++static int max_outstanding = 8;
++static unsigned int setup_timeout = 300;
++
++MODULE_AUTHOR("Tom Marshall <tmarshall at real.com>");
++MODULE_DESCRIPTION("RTSP connection tracking module");
++MODULE_LICENSE("GPL");
++module_param_array(ports, int, &num_ports, 0400);
++MODULE_PARM_DESC(ports, "port numbers of RTSP servers");
++module_param(max_outstanding, int, 0400);
++MODULE_PARM_DESC(max_outstanding, "max number of outstanding SETUP requests per RTSP session");
++module_param(setup_timeout, int, 0400);
++MODULE_PARM_DESC(setup_timeout, "timeout on for unestablished data channels");
++
++static char *rtsp_buffer;
++static DEFINE_SPINLOCK(rtsp_buffer_lock);
++
++unsigned int (*nf_nat_rtsp_hook)(struct sk_buff *skb,
++				 enum ip_conntrack_info ctinfo,
++				 unsigned int matchoff, unsigned int matchlen,struct ip_ct_rtsp_expect* prtspexp,
++				 struct nf_conntrack_expect *exp);
++void (*nf_nat_rtsp_hook_expectfn)(struct nf_conn *ct, struct nf_conntrack_expect *exp);
++
++EXPORT_SYMBOL_GPL(nf_nat_rtsp_hook);
++
++/*
++ * Max mappings we will allow for one RTSP connection (for RTP, the number
++ * of allocated ports is twice this value).  Note that SMIL burns a lot of
++ * ports so keep this reasonably high.  If this is too low, you will see a
++ * lot of "no free client map entries" messages.
++ */
++#define MAX_PORT_MAPS 16
++
++/*** default port list was here in the masq code: 554, 3030, 4040 ***/
++
++#define SKIP_WSPACE(ptr,len,off) while(off < len && isspace(*(ptr+off))) { off++; }
++
++/*
++ * Parse an RTSP packet.
++ *
++ * Returns zero if parsing failed.
++ *
++ * Parameters:
++ *  IN      ptcp        tcp data pointer
++ *  IN      tcplen      tcp data len
++ *  IN/OUT  ptcpoff     points to current tcp offset
++ *  OUT     phdrsoff    set to offset of rtsp headers
++ *  OUT     phdrslen    set to length of rtsp headers
++ *  OUT     pcseqoff    set to offset of CSeq header
++ *  OUT     pcseqlen    set to length of CSeq header
++ */
++static int
++rtsp_parse_message(char* ptcp, uint tcplen, uint* ptcpoff,
++                   uint* phdrsoff, uint* phdrslen,
++                   uint* pcseqoff, uint* pcseqlen,
++                   uint* transoff, uint* translen)
++{
++	uint    entitylen = 0;
++	uint    lineoff;
++	uint    linelen;
++
++	if (!nf_nextline(ptcp, tcplen, ptcpoff, &lineoff, &linelen))
++		return 0;
++
++	*phdrsoff = *ptcpoff;
++	while (nf_mime_nextline(ptcp, tcplen, ptcpoff, &lineoff, &linelen)) {
++		if (linelen == 0) {
++			if (entitylen > 0)
++				*ptcpoff += min(entitylen, tcplen - *ptcpoff);
++			break;
++		}
++		if (lineoff+linelen > tcplen) {
++			INFOP("!! overrun !!\n");
++			break;
++		}
++
++		if (nf_strncasecmp(ptcp+lineoff, "CSeq:", 5) == 0) {
++			*pcseqoff = lineoff;
++			*pcseqlen = linelen;
++		}
++
++		if (nf_strncasecmp(ptcp+lineoff, "Transport:", 10) == 0) {
++			*transoff = lineoff;
++			*translen = linelen;
++		}
++
++		if (nf_strncasecmp(ptcp+lineoff, "Content-Length:", 15) == 0) {
++			uint off = lineoff+15;
++			SKIP_WSPACE(ptcp+lineoff, linelen, off);
++			nf_strtou32(ptcp+off, &entitylen);
++		}
++	}
++	*phdrslen = (*ptcpoff) - (*phdrsoff);
++
++	return 1;
++}
++
++/*
++ * Find lo/hi client ports (if any) in transport header
++ * In:
++ *   ptcp, tcplen = packet
++ *   tranoff, tranlen = buffer to search
++ *
++ * Out:
++ *   pport_lo, pport_hi = lo/hi ports (host endian)
++ *
++ * Returns nonzero if any client ports found
++ *
++ * Note: it is valid (and expected) for the client to request multiple
++ * transports, so we need to parse the entire line.
++ */
++static int
++rtsp_parse_transport(char* ptran, uint tranlen,
++                     struct ip_ct_rtsp_expect* prtspexp)
++{
++	int     rc = 0;
++	uint    off = 0;
++
++	if (tranlen < 10 || !iseol(ptran[tranlen-1]) ||
++	    nf_strncasecmp(ptran, "Transport:", 10) != 0) {
++		INFOP("sanity check failed\n");
++		return 0;
++	}
++
++	DEBUGP("tran='%.*s'\n", (int)tranlen, ptran);
++	off += 10;
++	SKIP_WSPACE(ptran, tranlen, off);
++
++	/* Transport: tran;field;field=val,tran;field;field=val,... */
++	while (off < tranlen) {
++		const char* pparamend;
++		uint        nextparamoff;
++
++		pparamend = memchr(ptran+off, ',', tranlen-off);
++		pparamend = (pparamend == NULL) ? ptran+tranlen : pparamend+1;
++		nextparamoff = pparamend-ptran;
++
++		while (off < nextparamoff) {
++			const char* pfieldend;
++			uint        nextfieldoff;
++
++			pfieldend = memchr(ptran+off, ';', nextparamoff-off);
++			nextfieldoff = (pfieldend == NULL) ? nextparamoff : pfieldend-ptran+1;
++
++			if (strncmp(ptran+off, "client_port=", 12) == 0) {
++				u_int16_t   port;
++				uint        numlen;
++
++				off += 12;
++				numlen = nf_strtou16(ptran+off, &port);
++				off += numlen;
++				if (prtspexp->loport != 0 && prtspexp->loport != port)
++					DEBUGP("multiple ports found, port %hu ignored\n", port);
++				else {
++					DEBUGP("lo port found : %hu\n", port);
++					prtspexp->loport = prtspexp->hiport = port;
++					if (ptran[off] == '-') {
++						off++;
++						numlen = nf_strtou16(ptran+off, &port);
++						off += numlen;
++						prtspexp->pbtype = pb_range;
++						prtspexp->hiport = port;
++
++						// If we have a range, assume rtp:
++						// loport must be even, hiport must be loport+1
++						if ((prtspexp->loport & 0x0001) != 0 ||
++						    prtspexp->hiport != prtspexp->loport+1) {
++							DEBUGP("incorrect range: %hu-%hu, correcting\n",
++							       prtspexp->loport, prtspexp->hiport);
++							prtspexp->loport &= 0xfffe;
++							prtspexp->hiport = prtspexp->loport+1;
++						}
++					} else if (ptran[off] == '/') {
++						off++;
++						numlen = nf_strtou16(ptran+off, &port);
++						off += numlen;
++						prtspexp->pbtype = pb_discon;
++						prtspexp->hiport = port;
++					}
++					rc = 1;
++				}
++			}
++
++			/*
++			 * Note we don't look for the destination parameter here.
++			 * If we are using NAT, the NAT module will handle it.  If not,
++			 * and the client is sending packets elsewhere, the expectation
++			 * will quietly time out.
++			 */
++
++			off = nextfieldoff;
++		}
++
++		off = nextparamoff;
++	}
++
++	return rc;
++}
++
++void expected(struct nf_conn *ct, struct nf_conntrack_expect *exp)
++{
++    if(nf_nat_rtsp_hook_expectfn) {
++        nf_nat_rtsp_hook_expectfn(ct,exp);
++    }
++}
++
++/*** conntrack functions ***/
++
++/* outbound packet: client->server */
++
++static inline int
++help_out(struct sk_buff *skb, unsigned char *rb_ptr, unsigned int datalen,
++                struct nf_conn *ct, enum ip_conntrack_info ctinfo)
++{
++	struct ip_ct_rtsp_expect expinfo;
++
++	int dir = CTINFO2DIR(ctinfo);   /* = IP_CT_DIR_ORIGINAL */
++	//struct  tcphdr* tcph = (void*)iph + iph->ihl * 4;
++	//uint    tcplen = pktlen - iph->ihl * 4;
++	char*   pdata = rb_ptr;
++	//uint    datalen = tcplen - tcph->doff * 4;
++	uint    dataoff = 0;
++	int ret = NF_ACCEPT;
++
++	struct nf_conntrack_expect *exp;
++
++	__be16 be_loport;
++
++	memset(&expinfo, 0, sizeof(expinfo));
++
++	while (dataoff < datalen) {
++		uint    cmdoff = dataoff;
++		uint    hdrsoff = 0;
++		uint    hdrslen = 0;
++		uint    cseqoff = 0;
++		uint    cseqlen = 0;
++		uint    transoff = 0;
++		uint    translen = 0;
++		uint    off;
++
++		if (!rtsp_parse_message(pdata, datalen, &dataoff,
++					&hdrsoff, &hdrslen,
++					&cseqoff, &cseqlen,
++					&transoff, &translen))
++			break;      /* not a valid message */
++
++		if (strncmp(pdata+cmdoff, "SETUP ", 6) != 0)
++			continue;   /* not a SETUP message */
++		DEBUGP("found a setup message\n");
++
++		off = 0;
++		if(translen) {
++			rtsp_parse_transport(pdata+transoff, translen, &expinfo);
++		}
++
++		if (expinfo.loport == 0) {
++			DEBUGP("no udp transports found\n");
++			continue;   /* no udp transports found */
++		}
++
++		DEBUGP("udp transport found, ports=(%d,%hu,%hu)\n",
++		       (int)expinfo.pbtype, expinfo.loport, expinfo.hiport);
++
++		exp = nf_ct_expect_alloc(ct);
++		if (!exp) {
++			ret = NF_DROP;
++			goto out;
++		}
++
++		be_loport = htons(expinfo.loport);
++
++		nf_ct_expect_init(exp, NF_CT_EXPECT_CLASS_DEFAULT,
++			ct->tuplehash[!dir].tuple.src.l3num,
++			&ct->tuplehash[!dir].tuple.src.u3, &ct->tuplehash[!dir].tuple.dst.u3,
++			IPPROTO_UDP, NULL, &be_loport);
++
++		exp->master = ct;
++
++		exp->expectfn = expected;
++		exp->flags = 0;
++
++		if (expinfo.pbtype == pb_range) {
++			DEBUGP("Changing expectation mask to handle multiple ports\n");
++			exp->mask.src.u.udp.port  = 0xfffe;
++		}
++
++		DEBUGP("expect_related %u.%u.%u.%u:%u-%u.%u.%u.%u:%u\n",
++		       NIPQUAD(exp->tuple.src.u3.ip),
++		       ntohs(exp->tuple.src.u.udp.port),
++		       NIPQUAD(exp->tuple.dst.u3.ip),
++		       ntohs(exp->tuple.dst.u.udp.port));
++
++		if (nf_nat_rtsp_hook)
++			/* pass the request off to the nat helper */
++			ret = nf_nat_rtsp_hook(skb, ctinfo, hdrsoff, hdrslen, &expinfo, exp);
++		else if (nf_ct_expect_related(exp) != 0) {
++			INFOP("nf_ct_expect_related failed\n");
++			ret  = NF_DROP;
++		}
++		nf_ct_expect_put(exp);
++		goto out;
++	}
++out:
++
++	return ret;
++}
++
++
++static inline int
++help_in(struct sk_buff *skb, size_t pktlen,
++ struct nf_conn* ct, enum ip_conntrack_info ctinfo)
++{
++ return NF_ACCEPT;
++}
++
++static int help(struct sk_buff *skb, unsigned int protoff,
++		struct nf_conn *ct, enum ip_conntrack_info ctinfo)
++{
++	struct tcphdr _tcph, *th;
++	unsigned int dataoff, datalen;
++	char *rb_ptr;
++	int ret = NF_DROP;
++
++	/* Until there's been traffic both ways, don't look in packets. */
++	if (ctinfo != IP_CT_ESTABLISHED &&
++	    ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY) {
++		DEBUGP("conntrackinfo = %u\n", ctinfo);
++		return NF_ACCEPT;
++	}
++
++	/* Not whole TCP header? */
++	th = skb_header_pointer(skb, protoff, sizeof(_tcph), &_tcph);
++
++	if (!th)
++		return NF_ACCEPT;
++
++	/* No data ? */
++	dataoff = protoff + th->doff*4;
++	datalen = skb->len - dataoff;
++	if (dataoff >= skb->len)
++		return NF_ACCEPT;
++
++	spin_lock_bh(&rtsp_buffer_lock);
++	rb_ptr = skb_header_pointer(skb, dataoff,
++				    skb->len - dataoff, rtsp_buffer);
++	BUG_ON(rb_ptr == NULL);
++
++#if 0
++	/* Checksum invalid?  Ignore. */
++	/* FIXME: Source route IP option packets --RR */
++	if (tcp_v4_check(tcph, tcplen, iph->saddr, iph->daddr,
++			 csum_partial((char*)tcph, tcplen, 0)))
++	{
++		DEBUGP("bad csum: %p %u %u.%u.%u.%u %u.%u.%u.%u\n",
++		       tcph, tcplen, NIPQUAD(iph->saddr), NIPQUAD(iph->daddr));
++		return NF_ACCEPT;
++	}
++#endif
++
++	switch (CTINFO2DIR(ctinfo)) {
++	case IP_CT_DIR_ORIGINAL:
++		ret = help_out(skb, rb_ptr, datalen, ct, ctinfo);
++		break;
++	case IP_CT_DIR_REPLY:
++		DEBUGP("IP_CT_DIR_REPLY\n");
++		/* inbound packet: server->client */
++		ret = NF_ACCEPT;
++		break;
++	}
++
++	spin_unlock_bh(&rtsp_buffer_lock);
++
++	return ret;
++}
++
++static struct nf_conntrack_helper rtsp_helpers[MAX_PORTS];
++static char rtsp_names[MAX_PORTS][10];
++static struct nf_conntrack_expect_policy rtsp_expect_policy;
++
++/* This function is intentionally _NOT_ defined as __exit */
++static void
++fini(void)
++{
++	int i;
++	for (i = 0; i < num_ports; i++) {
++		DEBUGP("unregistering port %d\n", ports[i]);
++		nf_conntrack_helper_unregister(&rtsp_helpers[i]);
++	}
++	kfree(rtsp_buffer);
++}
++
++static int __init
++init(void)
++{
++	int i, ret;
++	struct nf_conntrack_helper *hlpr;
++	char *tmpname;
++
++	printk("nf_conntrack_rtsp v" IP_NF_RTSP_VERSION " loading\n");
++
++	if (max_outstanding < 1) {
++		printk("nf_conntrack_rtsp: max_outstanding must be a positive integer\n");
++		return -EBUSY;
++	}
++	if (setup_timeout < 0) {
++		printk("nf_conntrack_rtsp: setup_timeout must be a positive integer\n");
++		return -EBUSY;
++	}
++
++	rtsp_expect_policy.max_expected = max_outstanding;
++	rtsp_expect_policy.timeout = setup_timeout;
++
++	rtsp_buffer = kmalloc(65536, GFP_KERNEL);
++	if (!rtsp_buffer)
++		return -ENOMEM;
++
++	/* If no port given, default to standard rtsp port */
++	if (ports[0] == 0) {
++		ports[0] = RTSP_PORT;
++	}
++
++	for (i = 0; (i < MAX_PORTS) && ports[i]; i++) {
++		hlpr = &rtsp_helpers[i];
++		memset(hlpr, 0, sizeof(struct nf_conntrack_helper));
++		hlpr->tuple.src.u.tcp.port = htons(ports[i]);
++		hlpr->tuple.dst.protonum = IPPROTO_TCP;
++		hlpr->expect_policy = &rtsp_expect_policy;
++		hlpr->me = THIS_MODULE;
++		hlpr->help = help;
++
++		tmpname = &rtsp_names[i][0];
++		if (ports[i] == RTSP_PORT) {
++			sprintf(tmpname, "rtsp");
++		} else {
++			sprintf(tmpname, "rtsp-%d", i);
++		}
++		hlpr->name = tmpname;
++
++		DEBUGP("port #%d: %d\n", i, ports[i]);
++
++		ret = nf_conntrack_helper_register(hlpr);
++
++		if (ret) {
++			printk("nf_conntrack_rtsp: ERROR registering port %d\n", ports[i]);
++			fini();
++			return -EBUSY;
++		}
++		num_ports++;
++	}
++	return 0;
++}
++
++module_init(init);
++module_exit(fini);
++
++EXPORT_SYMBOL(nf_nat_rtsp_hook_expectfn);
++
+--- /dev/null
++++ b/net/ipv4/netfilter/nf_nat_rtsp.c
+@@ -0,0 +1,496 @@
++/*
++ * RTSP extension for TCP NAT alteration
++ * (C) 2003 by Tom Marshall <tmarshall at real.com>
++ * based on ip_nat_irc.c
++ *
++ *      This program is free software; you can redistribute it and/or
++ *      modify it under the terms of the GNU General Public License
++ *      as published by the Free Software Foundation; either version
++ *      2 of the License, or (at your option) any later version.
++ *
++ * Module load syntax:
++ *      insmod nf_nat_rtsp.o ports=port1,port2,...port<MAX_PORTS>
++ *                           stunaddr=<address>
++ *                           destaction=[auto|strip|none]
++ *
++ * If no ports are specified, the default will be port 554 only.
++ *
++ * stunaddr specifies the address used to detect that a client is using STUN.
++ * If this address is seen in the destination parameter, it is assumed that
++ * the client has already punched a UDP hole in the firewall, so we don't
++ * mangle the client_port.  If none is specified, it is autodetected.  It
++ * only needs to be set if you have multiple levels of NAT.  It should be
++ * set to the external address that the STUN clients detect.  Note that in
++ * this case, it will not be possible for clients to use UDP with servers
++ * between the NATs.
++ *
++ * If no destaction is specified, auto is used.
++ *   destaction=auto:  strip destination parameter if it is not stunaddr.
++ *   destaction=strip: always strip destination parameter (not recommended).
++ *   destaction=none:  do not touch destination parameter (not recommended).
++ */
++
++#include <linux/module.h>
++#include <net/tcp.h>
++#include <net/netfilter/nf_nat_helper.h>
++#include <net/netfilter/nf_nat_rule.h>
++#include <linux/netfilter/nf_conntrack_rtsp.h>
++#include <net/netfilter/nf_conntrack_expect.h>
++
++#include <linux/inet.h>
++#include <linux/ctype.h>
++#define NF_NEED_STRNCASECMP
++#define NF_NEED_STRTOU16
++#include <linux/netfilter_helpers.h>
++#define NF_NEED_MIME_NEXTLINE
++#include <linux/netfilter_mime.h>
++
++#define INFOP(fmt, args...) printk(KERN_INFO "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
++#if 0
++#define DEBUGP(fmt, args...) printk(KERN_DEBUG "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
++#else
++#define DEBUGP(fmt, args...)
++#endif
++
++#define MAX_PORTS       8
++#define DSTACT_AUTO     0
++#define DSTACT_STRIP    1
++#define DSTACT_NONE     2
++
++static char*    stunaddr = NULL;
++static char*    destaction = NULL;
++
++static u_int32_t extip = 0;
++static int       dstact = 0;
++
++MODULE_AUTHOR("Tom Marshall <tmarshall at real.com>");
++MODULE_DESCRIPTION("RTSP network address translation module");
++MODULE_LICENSE("GPL");
++module_param(stunaddr, charp, 0644);
++MODULE_PARM_DESC(stunaddr, "Address for detecting STUN");
++module_param(destaction, charp, 0644);
++MODULE_PARM_DESC(destaction, "Action for destination parameter (auto/strip/none)");
++
++#define SKIP_WSPACE(ptr,len,off) while(off < len && isspace(*(ptr+off))) { off++; }
++
++/*** helper functions ***/
++
++static void
++get_skb_tcpdata(struct sk_buff* skb, char** pptcpdata, uint* ptcpdatalen)
++{
++    struct iphdr*   iph  = ip_hdr(skb);
++    struct tcphdr*  tcph = (void *)iph + ip_hdrlen(skb);
++
++    *pptcpdata = (char*)tcph +  tcph->doff*4;
++    *ptcpdatalen = ((char*)skb_transport_header(skb) + skb->len) - *pptcpdata;
++}
++
++/*** nat functions ***/
++
++/*
++ * Mangle the "Transport:" header:
++ *   - Replace all occurences of "client_port=<spec>"
++ *   - Handle destination parameter
++ *
++ * In:
++ *   ct, ctinfo = conntrack context
++ *   skb        = packet
++ *   tranoff    = Transport header offset from TCP data
++ *   tranlen    = Transport header length (incl. CRLF)
++ *   rport_lo   = replacement low  port (host endian)
++ *   rport_hi   = replacement high port (host endian)
++ *
++ * Returns packet size difference.
++ *
++ * Assumes that a complete transport header is present, ending with CR or LF
++ */
++static int
++rtsp_mangle_tran(enum ip_conntrack_info ctinfo,
++                 struct nf_conntrack_expect* exp,
++								 struct ip_ct_rtsp_expect* prtspexp,
++                 struct sk_buff* skb, uint tranoff, uint tranlen)
++{
++    char*       ptcp;
++    uint        tcplen;
++    char*       ptran;
++    char        rbuf1[16];      /* Replacement buffer (one port) */
++    uint        rbuf1len;       /* Replacement len (one port) */
++    char        rbufa[16];      /* Replacement buffer (all ports) */
++    uint        rbufalen;       /* Replacement len (all ports) */
++    u_int32_t   newip;
++    u_int16_t   loport, hiport;
++    uint        off = 0;
++    uint        diff;           /* Number of bytes we removed */
++
++    struct nf_conn *ct = exp->master;
++    struct nf_conntrack_tuple *t;
++
++    char    szextaddr[15+1];
++    uint    extaddrlen;
++    int     is_stun;
++
++    get_skb_tcpdata(skb, &ptcp, &tcplen);
++    ptran = ptcp+tranoff;
++
++    if (tranoff+tranlen > tcplen || tcplen-tranoff < tranlen ||
++        tranlen < 10 || !iseol(ptran[tranlen-1]) ||
++        nf_strncasecmp(ptran, "Transport:", 10) != 0)
++    {
++        INFOP("sanity check failed\n");
++        return 0;
++    }
++    off += 10;
++    SKIP_WSPACE(ptcp+tranoff, tranlen, off);
++
++    newip = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip;
++    t = &exp->tuple;
++    t->dst.u3.ip = newip;
++
++    extaddrlen = extip ? sprintf(szextaddr, "%u.%u.%u.%u", NIPQUAD(extip))
++                       : sprintf(szextaddr, "%u.%u.%u.%u", NIPQUAD(newip));
++    DEBUGP("stunaddr=%s (%s)\n", szextaddr, (extip?"forced":"auto"));
++
++    rbuf1len = rbufalen = 0;
++    switch (prtspexp->pbtype)
++    {
++    case pb_single:
++        for (loport = prtspexp->loport; loport != 0; loport++) /* XXX: improper wrap? */
++        {
++            t->dst.u.udp.port = htons(loport);
++            if (nf_ct_expect_related(exp) == 0)
++            {
++                DEBUGP("using port %hu\n", loport);
++                break;
++            }
++        }
++        if (loport != 0)
++        {
++            rbuf1len = sprintf(rbuf1, "%hu", loport);
++            rbufalen = sprintf(rbufa, "%hu", loport);
++        }
++        break;
++    case pb_range:
++        for (loport = prtspexp->loport; loport != 0; loport += 2) /* XXX: improper wrap? */
++        {
++            t->dst.u.udp.port = htons(loport);
++            if (nf_ct_expect_related(exp) == 0)
++            {
++                hiport = loport + ~exp->mask.src.u.udp.port;
++                DEBUGP("using ports %hu-%hu\n", loport, hiport);
++                break;
++            }
++        }
++        if (loport != 0)
++        {
++            rbuf1len = sprintf(rbuf1, "%hu", loport);
++            rbufalen = sprintf(rbufa, "%hu-%hu", loport, loport+1);
++        }
++        break;
++    case pb_discon:
++        for (loport = prtspexp->loport; loport != 0; loport++) /* XXX: improper wrap? */
++        {
++            t->dst.u.udp.port = htons(loport);
++            if (nf_ct_expect_related(exp) == 0)
++            {
++                DEBUGP("using port %hu (1 of 2)\n", loport);
++                break;
++            }
++        }
++        for (hiport = prtspexp->hiport; hiport != 0; hiport++) /* XXX: improper wrap? */
++        {
++            t->dst.u.udp.port = htons(hiport);
++            if (nf_ct_expect_related(exp) == 0)
++            {
++                DEBUGP("using port %hu (2 of 2)\n", hiport);
++                break;
++            }
++        }
++        if (loport != 0 && hiport != 0)
++        {
++            rbuf1len = sprintf(rbuf1, "%hu", loport);
++            if (hiport == loport+1)
++            {
++                rbufalen = sprintf(rbufa, "%hu-%hu", loport, hiport);
++            }
++            else
++            {
++                rbufalen = sprintf(rbufa, "%hu/%hu", loport, hiport);
++            }
++        }
++        break;
++    }
++
++    if (rbuf1len == 0)
++    {
++        return 0;   /* cannot get replacement port(s) */
++    }
++
++    /* Transport: tran;field;field=val,tran;field;field=val,... */
++    while (off < tranlen)
++    {
++        uint        saveoff;
++        const char* pparamend;
++        uint        nextparamoff;
++
++        pparamend = memchr(ptran+off, ',', tranlen-off);
++        pparamend = (pparamend == NULL) ? ptran+tranlen : pparamend+1;
++        nextparamoff = pparamend-ptcp;
++
++        /*
++         * We pass over each param twice.  On the first pass, we look for a
++         * destination= field.  It is handled by the security policy.  If it
++         * is present, allowed, and equal to our external address, we assume
++         * that STUN is being used and we leave the client_port= field alone.
++         */
++        is_stun = 0;
++        saveoff = off;
++        while (off < nextparamoff)
++        {
++            const char* pfieldend;
++            uint        nextfieldoff;
++
++            pfieldend = memchr(ptran+off, ';', nextparamoff-off);
++            nextfieldoff = (pfieldend == NULL) ? nextparamoff : pfieldend-ptran+1;
++
++            if (dstact != DSTACT_NONE && strncmp(ptran+off, "destination=", 12) == 0)
++            {
++                if (strncmp(ptran+off+12, szextaddr, extaddrlen) == 0)
++                {
++                    is_stun = 1;
++                }
++                if (dstact == DSTACT_STRIP || (dstact == DSTACT_AUTO && !is_stun))
++                {
++                    diff = nextfieldoff-off;
++                    if (!nf_nat_mangle_tcp_packet(skb, ct, ctinfo,
++                                                         off, diff, NULL, 0))
++                    {
++                        /* mangle failed, all we can do is bail */
++			nf_ct_unexpect_related(exp);
++                        return 0;
++                    }
++                    get_skb_tcpdata(skb, &ptcp, &tcplen);
++                    ptran = ptcp+tranoff;
++                    tranlen -= diff;
++                    nextparamoff -= diff;
++                    nextfieldoff -= diff;
++                }
++            }
++
++            off = nextfieldoff;
++        }
++        if (is_stun)
++        {
++            continue;
++        }
++        off = saveoff;
++        while (off < nextparamoff)
++        {
++            const char* pfieldend;
++            uint        nextfieldoff;
++
++            pfieldend = memchr(ptran+off, ';', nextparamoff-off);
++            nextfieldoff = (pfieldend == NULL) ? nextparamoff : pfieldend-ptran+1;
++
++            if (strncmp(ptran+off, "client_port=", 12) == 0)
++            {
++                u_int16_t   port;
++                uint        numlen;
++                uint        origoff;
++                uint        origlen;
++                char*       rbuf    = rbuf1;
++                uint        rbuflen = rbuf1len;
++
++                off += 12;
++                origoff = (ptran-ptcp)+off;
++                origlen = 0;
++                numlen = nf_strtou16(ptran+off, &port);
++                off += numlen;
++                origlen += numlen;
++                if (port != prtspexp->loport)
++                {
++                    DEBUGP("multiple ports found, port %hu ignored\n", port);
++                }
++                else
++                {
++                    if (ptran[off] == '-' || ptran[off] == '/')
++                    {
++                        off++;
++                        origlen++;
++                        numlen = nf_strtou16(ptran+off, &port);
++                        off += numlen;
++                        origlen += numlen;
++                        rbuf = rbufa;
++                        rbuflen = rbufalen;
++                    }
++
++                    /*
++                     * note we cannot just memcpy() if the sizes are the same.
++                     * the mangle function does skb resizing, checks for a
++                     * cloned skb, and updates the checksums.
++                     *
++                     * parameter 4 below is offset from start of tcp data.
++                     */
++                    diff = origlen-rbuflen;
++                    if (!nf_nat_mangle_tcp_packet(skb, ct, ctinfo,
++                                              origoff, origlen, rbuf, rbuflen))
++                    {
++                        /* mangle failed, all we can do is bail */
++			nf_ct_unexpect_related(exp);
++                        return 0;
++                    }
++                    get_skb_tcpdata(skb, &ptcp, &tcplen);
++                    ptran = ptcp+tranoff;
++                    tranlen -= diff;
++                    nextparamoff -= diff;
++                    nextfieldoff -= diff;
++                }
++            }
++
++            off = nextfieldoff;
++        }
++
++        off = nextparamoff;
++    }
++
++    return 1;
++}
++
++static uint
++help_out(struct sk_buff *skb, enum ip_conntrack_info ctinfo,
++	 unsigned int matchoff, unsigned int matchlen, struct ip_ct_rtsp_expect* prtspexp,
++	 struct nf_conntrack_expect* exp)
++{
++    char*   ptcp;
++    uint    tcplen;
++    uint    hdrsoff;
++    uint    hdrslen;
++    uint    lineoff;
++    uint    linelen;
++    uint    off;
++
++    //struct iphdr* iph = (struct iphdr*)skb->nh.iph;
++    //struct tcphdr* tcph = (struct tcphdr*)((void*)iph + iph->ihl*4);
++
++    get_skb_tcpdata(skb, &ptcp, &tcplen);
++    hdrsoff = matchoff;//exp->seq - ntohl(tcph->seq);
++    hdrslen = matchlen;
++    off = hdrsoff;
++    DEBUGP("NAT rtsp help_out\n");
++
++    while (nf_mime_nextline(ptcp, hdrsoff+hdrslen, &off, &lineoff, &linelen))
++    {
++        if (linelen == 0)
++        {
++            break;
++        }
++        if (off > hdrsoff+hdrslen)
++        {
++            INFOP("!! overrun !!");
++            break;
++        }
++        DEBUGP("hdr: len=%u, %.*s", linelen, (int)linelen, ptcp+lineoff);
++
++        if (nf_strncasecmp(ptcp+lineoff, "Transport:", 10) == 0)
++        {
++            uint oldtcplen = tcplen;
++	    DEBUGP("hdr: Transport\n");
++            if (!rtsp_mangle_tran(ctinfo, exp, prtspexp, skb, lineoff, linelen))
++            {
++		DEBUGP("hdr: Transport mangle failed");
++                break;
++            }
++            get_skb_tcpdata(skb, &ptcp, &tcplen);
++            hdrslen -= (oldtcplen-tcplen);
++            off -= (oldtcplen-tcplen);
++            lineoff -= (oldtcplen-tcplen);
++            linelen -= (oldtcplen-tcplen);
++            DEBUGP("rep: len=%u, %.*s", linelen, (int)linelen, ptcp+lineoff);
++        }
++    }
++
++    return NF_ACCEPT;
++}
++
++static unsigned int
++help(struct sk_buff *skb, enum ip_conntrack_info ctinfo,
++     unsigned int matchoff, unsigned int matchlen, struct ip_ct_rtsp_expect* prtspexp,
++     struct nf_conntrack_expect* exp)
++{
++    int dir = CTINFO2DIR(ctinfo);
++    int rc = NF_ACCEPT;
++
++    switch (dir)
++    {
++    case IP_CT_DIR_ORIGINAL:
++        rc = help_out(skb, ctinfo, matchoff, matchlen, prtspexp, exp);
++        break;
++    case IP_CT_DIR_REPLY:
++	DEBUGP("unmangle ! %u\n", ctinfo);
++    	/* XXX: unmangle */
++	rc = NF_ACCEPT;
++        break;
++    }
++    //UNLOCK_BH(&ip_rtsp_lock);
++
++    return rc;
++}
++
++static void expected(struct nf_conn* ct, struct nf_conntrack_expect *exp)
++{
++    struct nf_nat_multi_range_compat mr;
++    u_int32_t newdstip, newsrcip, newip;
++
++    struct nf_conn *master = ct->master;
++
++    newdstip = master->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
++    newsrcip = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
++    //FIXME (how to port that ?)
++    //code from 2.4 : newip = (HOOK2MANIP(hooknum) == IP_NAT_MANIP_SRC) ? newsrcip : newdstip;
++    newip = newdstip;
++
++    DEBUGP("newsrcip=%u.%u.%u.%u, newdstip=%u.%u.%u.%u, newip=%u.%u.%u.%u\n",
++           NIPQUAD(newsrcip), NIPQUAD(newdstip), NIPQUAD(newip));
++
++    mr.rangesize = 1;
++    // We don't want to manip the per-protocol, just the IPs.
++    mr.range[0].flags = IP_NAT_RANGE_MAP_IPS;
++    mr.range[0].min_ip = mr.range[0].max_ip = newip;
++
++    nf_nat_setup_info(ct, &mr.range[0], IP_NAT_MANIP_DST);
++}
++
++
++static void __exit fini(void)
++{
++	nf_nat_rtsp_hook = NULL;
++        nf_nat_rtsp_hook_expectfn = NULL;
++	synchronize_net();
++}
++
++static int __init init(void)
++{
++	printk("nf_nat_rtsp v" IP_NF_RTSP_VERSION " loading\n");
++
++	BUG_ON(nf_nat_rtsp_hook);
++	nf_nat_rtsp_hook = help;
++        nf_nat_rtsp_hook_expectfn = &expected;
++
++	if (stunaddr != NULL)
++		extip = in_aton(stunaddr);
++
++	if (destaction != NULL) {
++	        if (strcmp(destaction, "auto") == 0)
++			dstact = DSTACT_AUTO;
++
++		if (strcmp(destaction, "strip") == 0)
++			dstact = DSTACT_STRIP;
++
++		if (strcmp(destaction, "none") == 0)
++			dstact = DSTACT_NONE;
++	}
++
++	return 0;
++}
++
++module_init(init);
++module_exit(fini);
diff --git a/target/linux/generic/patches-2.6.34/200-sched_esfq.patch b/target/linux/generic/patches-2.6.34/200-sched_esfq.patch
new file mode 100644
index 0000000000..1d513580b3
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/200-sched_esfq.patch
@@ -0,0 +1,795 @@
+--- a/include/linux/pkt_sched.h
++++ b/include/linux/pkt_sched.h
+@@ -173,8 +173,37 @@ struct tc_sfq_xstats {
+  *
+  *	The only reason for this is efficiency, it is possible
+  *	to change these parameters in compile time.
++ *
++ *	If you need to play with these values, use esfq instead.
+  */
+ 
++/* ESFQ section */
++
++enum
++{
++        /* traditional */
++	TCA_SFQ_HASH_CLASSIC,
++	TCA_SFQ_HASH_DST,
++	TCA_SFQ_HASH_SRC,
++	TCA_SFQ_HASH_FWMARK,
++	/* conntrack */
++	TCA_SFQ_HASH_CTORIGDST,
++	TCA_SFQ_HASH_CTORIGSRC,
++	TCA_SFQ_HASH_CTREPLDST,
++	TCA_SFQ_HASH_CTREPLSRC,
++	TCA_SFQ_HASH_CTNATCHG,
++};
++
++struct tc_esfq_qopt
++{
++	unsigned	quantum;	/* Bytes per round allocated to flow */
++	int		perturb_period;	/* Period of hash perturbation */
++	__u32		limit;		/* Maximal packets in queue */
++	unsigned	divisor;	/* Hash divisor  */
++	unsigned	flows;		/* Maximal number of flows  */
++	unsigned	hash_kind;	/* Hash function to use for flow identification */
++};
++
+ /* RED section */
+ 
+ enum {
+--- a/net/sched/Kconfig
++++ b/net/sched/Kconfig
+@@ -137,6 +137,37 @@ config NET_SCH_SFQ
+ 	  To compile this code as a module, choose M here: the
+ 	  module will be called sch_sfq.
+ 
++config NET_SCH_ESFQ
++	tristate "Enhanced Stochastic Fairness Queueing (ESFQ)"
++	---help---
++	  Say Y here if you want to use the Enhanced Stochastic Fairness
++	  Queueing (ESFQ) packet scheduling algorithm for some of your network
++	  devices or as a leaf discipline for a classful qdisc such as HTB or
++	  CBQ (see the top of <file:net/sched/sch_esfq.c> for details and
++	  references to the SFQ algorithm).
++
++	  This is an enchanced SFQ version which allows you to control some
++	  hardcoded values in the SFQ scheduler.
++
++	  ESFQ also adds control of the hash function used to identify packet
++	  flows. The original SFQ discipline hashes by connection; ESFQ add
++	  several other hashing methods, such as by src IP or by dst IP, which
++	  can be more fair to users in some networking situations.
++
++	  To compile this code as a module, choose M here: the
++	  module will be called sch_esfq.
++
++config NET_SCH_ESFQ_NFCT
++	bool "Connection Tracking Hash Types"
++	depends on NET_SCH_ESFQ && NF_CONNTRACK
++	---help---
++	  Say Y here to enable support for hashing based on netfilter connection
++	  tracking information. This is useful for a router that is also using
++	  NAT to connect privately-addressed hosts to the Internet. If you want
++	  to provide fair distribution of upstream bandwidth, ESFQ must use
++	  connection tracking information, since all outgoing packets will share
++	  the same source address.
++
+ config NET_SCH_TEQL
+ 	tristate "True Link Equalizer (TEQL)"
+ 	---help---
+--- a/net/sched/Makefile
++++ b/net/sched/Makefile
+@@ -24,6 +24,7 @@ obj-$(CONFIG_NET_SCH_GRED)	+= sch_gred.o
+ obj-$(CONFIG_NET_SCH_INGRESS)	+= sch_ingress.o 
+ obj-$(CONFIG_NET_SCH_DSMARK)	+= sch_dsmark.o
+ obj-$(CONFIG_NET_SCH_SFQ)	+= sch_sfq.o
++obj-$(CONFIG_NET_SCH_ESFQ)	+= sch_esfq.o
+ obj-$(CONFIG_NET_SCH_TBF)	+= sch_tbf.o
+ obj-$(CONFIG_NET_SCH_TEQL)	+= sch_teql.o
+ obj-$(CONFIG_NET_SCH_PRIO)	+= sch_prio.o
+--- /dev/null
++++ b/net/sched/sch_esfq.c
+@@ -0,0 +1,702 @@
++/*
++ * net/sched/sch_esfq.c	Extended Stochastic Fairness Queueing discipline.
++ *
++ *		This program is free software; you can redistribute it and/or
++ *		modify it under the terms of the GNU General Public License
++ *		as published by the Free Software Foundation; either version
++ *		2 of the License, or (at your option) any later version.
++ *
++ * Authors:	Alexey Kuznetsov, <kuznet@ms2.inr.ac.ru>
++ *
++ * Changes:	Alexander Atanasov, <alex@ssi.bg>
++ *		Added dynamic depth,limit,divisor,hash_kind options.
++ *		Added dst and src hashes.
++ *
++ * 		Alexander Clouter, <alex@digriz.org.uk>
++ *		Ported ESFQ to Linux 2.6.
++ *
++ * 		Corey Hickey, <bugfood-c@fatooh.org>
++ *		Maintenance of the Linux 2.6 port.
++ *		Added fwmark hash (thanks to Robert Kurjata).
++ *		Added usage of jhash.
++ *		Added conntrack support.
++ *		Added ctnatchg hash (thanks to Ben Pfountz).
++ */
++
++#include <linux/module.h>
++#include <asm/uaccess.h>
++#include <asm/system.h>
++#include <linux/bitops.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/jiffies.h>
++#include <linux/string.h>
++#include <linux/mm.h>
++#include <linux/socket.h>
++#include <linux/sockios.h>
++#include <linux/in.h>
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/if_ether.h>
++#include <linux/inet.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/notifier.h>
++#include <linux/init.h>
++#include <net/ip.h>
++#include <net/netlink.h>
++#include <linux/ipv6.h>
++#include <net/route.h>
++#include <linux/skbuff.h>
++#include <net/sock.h>
++#include <net/pkt_sched.h>
++#include <linux/jhash.h>
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++#include <net/netfilter/nf_conntrack.h>
++#endif
++
++/*	Stochastic Fairness Queuing algorithm.
++	For more comments look at sch_sfq.c.
++	The difference is that you can change limit, depth,
++	hash table size and choose alternate hash types.
++
++	classic:	same as in sch_sfq.c
++	dst:		destination IP address
++	src:		source IP address
++	fwmark:		netfilter mark value
++	ctorigdst:	original destination IP address
++	ctorigsrc:	original source IP address
++	ctrepldst:	reply destination IP address
++	ctreplsrc:	reply source IP
++
++*/
++
++#define ESFQ_HEAD 0
++#define ESFQ_TAIL 1
++
++/* This type should contain at least SFQ_DEPTH*2 values */
++typedef unsigned int esfq_index;
++
++struct esfq_head
++{
++	esfq_index	next;
++	esfq_index	prev;
++};
++
++struct esfq_sched_data
++{
++/* Parameters */
++	int		perturb_period;
++	unsigned	quantum;	/* Allotment per round: MUST BE >= MTU */
++	int		limit;
++	unsigned	depth;
++	unsigned	hash_divisor;
++	unsigned	hash_kind;
++/* Variables */
++	struct timer_list perturb_timer;
++	int		perturbation;
++	esfq_index	tail;		/* Index of current slot in round */
++	esfq_index	max_depth;	/* Maximal depth */
++
++	esfq_index	*ht;			/* Hash table */
++	esfq_index	*next;			/* Active slots link */
++	short		*allot;			/* Current allotment per slot */
++	unsigned short	*hash;			/* Hash value indexed by slots */
++	struct sk_buff_head	*qs;		/* Slot queue */
++	struct esfq_head	*dep;		/* Linked list of slots, indexed by depth */
++};
++
++/* This contains the info we will hash. */
++struct esfq_packet_info
++{
++	u32	proto;		/* protocol or port */
++	u32	src;		/* source from packet header */
++	u32	dst;		/* destination from packet header */
++	u32	ctorigsrc;	/* original source from conntrack */
++	u32	ctorigdst;	/* original destination from conntrack */
++	u32	ctreplsrc;	/* reply source from conntrack */
++	u32	ctrepldst;	/* reply destination from conntrack */
++	u32	mark;		/* netfilter mark (fwmark) */
++};
++
++static __inline__ unsigned esfq_jhash_1word(struct esfq_sched_data *q,u32 a)
++{
++	return jhash_1word(a, q->perturbation) & (q->hash_divisor-1);
++}
++
++static __inline__ unsigned esfq_jhash_2words(struct esfq_sched_data *q, u32 a, u32 b)
++{
++	return jhash_2words(a, b, q->perturbation) & (q->hash_divisor-1);
++}
++
++static __inline__ unsigned esfq_jhash_3words(struct esfq_sched_data *q, u32 a, u32 b, u32 c)
++{
++	return jhash_3words(a, b, c, q->perturbation) & (q->hash_divisor-1);
++}
++
++static unsigned esfq_hash(struct esfq_sched_data *q, struct sk_buff *skb)
++{
++	struct esfq_packet_info info;
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++	enum ip_conntrack_info ctinfo;
++	struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
++#endif
++
++	switch (skb->protocol) {
++	case __constant_htons(ETH_P_IP):
++	{
++		struct iphdr *iph = ip_hdr(skb);
++		info.dst = iph->daddr;
++		info.src = iph->saddr;
++		if (!(iph->frag_off&htons(IP_MF|IP_OFFSET)) &&
++		    (iph->protocol == IPPROTO_TCP ||
++		     iph->protocol == IPPROTO_UDP ||
++		     iph->protocol == IPPROTO_SCTP ||
++		     iph->protocol == IPPROTO_DCCP ||
++		     iph->protocol == IPPROTO_ESP))
++			info.proto = *(((u32*)iph) + iph->ihl);
++		else
++			info.proto = iph->protocol;
++		break;
++	}
++	case __constant_htons(ETH_P_IPV6):
++	{
++		struct ipv6hdr *iph = ipv6_hdr(skb);
++		/* Hash ipv6 addresses into a u32. This isn't ideal,
++		 * but the code is simple. */
++		info.dst = jhash2(iph->daddr.s6_addr32, 4, q->perturbation);
++		info.src = jhash2(iph->saddr.s6_addr32, 4, q->perturbation);
++		if (iph->nexthdr == IPPROTO_TCP ||
++		    iph->nexthdr == IPPROTO_UDP ||
++		    iph->nexthdr == IPPROTO_SCTP ||
++		    iph->nexthdr == IPPROTO_DCCP ||
++		    iph->nexthdr == IPPROTO_ESP)
++			info.proto = *(u32*)&iph[1];
++		else
++			info.proto = iph->nexthdr;
++		break;
++	}
++	default:
++		info.dst   = (u32)(unsigned long)skb_dst(skb);
++		info.src   = (u32)(unsigned long)skb->sk;
++		info.proto = skb->protocol;
++	}
++
++	info.mark = skb->mark;
++
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++	/* defaults if there is no conntrack info */
++	info.ctorigsrc = info.src;
++	info.ctorigdst = info.dst;
++	info.ctreplsrc = info.dst;
++	info.ctrepldst = info.src;
++	/* collect conntrack info */
++	if (ct && ct != &nf_conntrack_untracked) {
++		if (skb->protocol == __constant_htons(ETH_P_IP)) {
++			info.ctorigsrc = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
++			info.ctorigdst = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3.ip;
++			info.ctreplsrc = ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3.ip;
++			info.ctrepldst = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip;
++		}
++		else if (skb->protocol == __constant_htons(ETH_P_IPV6)) {
++			/* Again, hash ipv6 addresses into a single u32. */
++			info.ctorigsrc = jhash2(ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip6, 4, q->perturbation);
++			info.ctorigdst = jhash2(ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3.ip6, 4, q->perturbation);
++			info.ctreplsrc = jhash2(ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3.ip6, 4, q->perturbation);
++			info.ctrepldst = jhash2(ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip6, 4, q->perturbation);
++		}
++
++	}
++#endif
++
++	switch(q->hash_kind) {
++	case TCA_SFQ_HASH_CLASSIC:
++		return esfq_jhash_3words(q, info.dst, info.src, info.proto);
++	case TCA_SFQ_HASH_DST:
++		return esfq_jhash_1word(q, info.dst);
++	case TCA_SFQ_HASH_SRC:
++		return esfq_jhash_1word(q, info.src);
++	case TCA_SFQ_HASH_FWMARK:
++		return esfq_jhash_1word(q, info.mark);
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++	case TCA_SFQ_HASH_CTORIGDST:
++		return esfq_jhash_1word(q, info.ctorigdst);
++	case TCA_SFQ_HASH_CTORIGSRC:
++		return esfq_jhash_1word(q, info.ctorigsrc);
++	case TCA_SFQ_HASH_CTREPLDST:
++		return esfq_jhash_1word(q, info.ctrepldst);
++	case TCA_SFQ_HASH_CTREPLSRC:
++		return esfq_jhash_1word(q, info.ctreplsrc);
++	case TCA_SFQ_HASH_CTNATCHG:
++	{
++		if (info.ctorigdst == info.ctreplsrc)
++			return esfq_jhash_1word(q, info.ctorigsrc);
++		return esfq_jhash_1word(q, info.ctreplsrc);
++	}
++#endif
++	default:
++		if (net_ratelimit())
++			printk(KERN_WARNING "ESFQ: Unknown hash method. Falling back to classic.\n");
++	}
++	return esfq_jhash_3words(q, info.dst, info.src, info.proto);
++}
++
++static inline void esfq_link(struct esfq_sched_data *q, esfq_index x)
++{
++	esfq_index p, n;
++	int d = q->qs[x].qlen + q->depth;
++
++	p = d;
++	n = q->dep[d].next;
++	q->dep[x].next = n;
++	q->dep[x].prev = p;
++	q->dep[p].next = q->dep[n].prev = x;
++}
++
++static inline void esfq_dec(struct esfq_sched_data *q, esfq_index x)
++{
++	esfq_index p, n;
++
++	n = q->dep[x].next;
++	p = q->dep[x].prev;
++	q->dep[p].next = n;
++	q->dep[n].prev = p;
++
++	if (n == p && q->max_depth == q->qs[x].qlen + 1)
++		q->max_depth--;
++
++	esfq_link(q, x);
++}
++
++static inline void esfq_inc(struct esfq_sched_data *q, esfq_index x)
++{
++	esfq_index p, n;
++	int d;
++
++	n = q->dep[x].next;
++	p = q->dep[x].prev;
++	q->dep[p].next = n;
++	q->dep[n].prev = p;
++	d = q->qs[x].qlen;
++	if (q->max_depth < d)
++		q->max_depth = d;
++
++	esfq_link(q, x);
++}
++
++static unsigned int esfq_drop(struct Qdisc *sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_index d = q->max_depth;
++	struct sk_buff *skb;
++	unsigned int len;
++
++	/* Queue is full! Find the longest slot and
++	   drop a packet from it */
++
++	if (d > 1) {
++		esfq_index x = q->dep[d+q->depth].next;
++		skb = q->qs[x].prev;
++		len = skb->len;
++		__skb_unlink(skb, &q->qs[x]);
++		kfree_skb(skb);
++		esfq_dec(q, x);
++		sch->q.qlen--;
++		sch->qstats.drops++;
++		sch->qstats.backlog -= len;
++		return len;
++	}
++
++	if (d == 1) {
++		/* It is difficult to believe, but ALL THE SLOTS HAVE LENGTH 1. */
++		d = q->next[q->tail];
++		q->next[q->tail] = q->next[d];
++		q->allot[q->next[d]] += q->quantum;
++		skb = q->qs[d].prev;
++		len = skb->len;
++		__skb_unlink(skb, &q->qs[d]);
++		kfree_skb(skb);
++		esfq_dec(q, d);
++		sch->q.qlen--;
++		q->ht[q->hash[d]] = q->depth;
++		sch->qstats.drops++;
++		sch->qstats.backlog -= len;
++		return len;
++	}
++
++	return 0;
++}
++
++static void esfq_q_enqueue(struct sk_buff *skb, struct esfq_sched_data *q, unsigned int end)
++{
++	unsigned hash = esfq_hash(q, skb);
++	unsigned depth = q->depth;
++	esfq_index x;
++
++	x = q->ht[hash];
++	if (x == depth) {
++		q->ht[hash] = x = q->dep[depth].next;
++		q->hash[x] = hash;
++	}
++
++	if (end == ESFQ_TAIL)
++		__skb_queue_tail(&q->qs[x], skb);
++	else
++		__skb_queue_head(&q->qs[x], skb);
++
++	esfq_inc(q, x);
++	if (q->qs[x].qlen == 1) {		/* The flow is new */
++		if (q->tail == depth) {	/* It is the first flow */
++			q->tail = x;
++			q->next[x] = x;
++			q->allot[x] = q->quantum;
++		} else {
++			q->next[x] = q->next[q->tail];
++			q->next[q->tail] = x;
++			q->tail = x;
++		}
++	}
++}
++
++static int esfq_enqueue(struct sk_buff *skb, struct Qdisc* sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_q_enqueue(skb, q, ESFQ_TAIL);
++	sch->qstats.backlog += skb->len;
++	if (++sch->q.qlen < q->limit-1) {
++		sch->bstats.bytes += skb->len;
++		sch->bstats.packets++;
++		return 0;
++	}
++
++	sch->qstats.drops++;
++	esfq_drop(sch);
++	return NET_XMIT_CN;
++}
++
++static struct sk_buff *esfq_peek(struct Qdisc* sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_index a;
++
++	/* No active slots */
++	if (q->tail == q->depth)
++		return NULL;
++
++	a = q->next[q->tail];
++	return skb_peek(&q->qs[a]);
++}
++
++static struct sk_buff *esfq_q_dequeue(struct esfq_sched_data *q)
++{
++	struct sk_buff *skb;
++	unsigned depth = q->depth;
++	esfq_index a, old_a;
++
++	/* No active slots */
++	if (q->tail == depth)
++		return NULL;
++
++	a = old_a = q->next[q->tail];
++
++	/* Grab packet */
++	skb = __skb_dequeue(&q->qs[a]);
++	esfq_dec(q, a);
++
++	/* Is the slot empty? */
++	if (q->qs[a].qlen == 0) {
++		q->ht[q->hash[a]] = depth;
++		a = q->next[a];
++		if (a == old_a) {
++			q->tail = depth;
++			return skb;
++		}
++		q->next[q->tail] = a;
++		q->allot[a] += q->quantum;
++	} else if ((q->allot[a] -= skb->len) <= 0) {
++		q->tail = a;
++		a = q->next[a];
++		q->allot[a] += q->quantum;
++	}
++
++	return skb;
++}
++
++static struct sk_buff *esfq_dequeue(struct Qdisc* sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	struct sk_buff *skb;
++
++	skb = esfq_q_dequeue(q);
++	if (skb == NULL)
++		return NULL;
++	sch->q.qlen--;
++	sch->qstats.backlog -= skb->len;
++	return skb;
++}
++
++static void esfq_q_destroy(struct esfq_sched_data *q)
++{
++	del_timer(&q->perturb_timer);
++	if(q->ht)
++		kfree(q->ht);
++	if(q->dep)
++		kfree(q->dep);
++	if(q->next)
++		kfree(q->next);
++	if(q->allot)
++		kfree(q->allot);
++	if(q->hash)
++		kfree(q->hash);
++	if(q->qs)
++		kfree(q->qs);
++}
++
++static void esfq_destroy(struct Qdisc *sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_q_destroy(q);
++}
++
++
++static void esfq_reset(struct Qdisc* sch)
++{
++	struct sk_buff *skb;
++
++	while ((skb = esfq_dequeue(sch)) != NULL)
++		kfree_skb(skb);
++}
++
++static void esfq_perturbation(unsigned long arg)
++{
++	struct Qdisc *sch = (struct Qdisc*)arg;
++	struct esfq_sched_data *q = qdisc_priv(sch);
++
++	q->perturbation = net_random()&0x1F;
++
++	if (q->perturb_period) {
++		q->perturb_timer.expires = jiffies + q->perturb_period;
++		add_timer(&q->perturb_timer);
++	}
++}
++
++static unsigned int esfq_check_hash(unsigned int kind)
++{
++	switch (kind) {
++	case TCA_SFQ_HASH_CTORIGDST:
++	case TCA_SFQ_HASH_CTORIGSRC:
++	case TCA_SFQ_HASH_CTREPLDST:
++	case TCA_SFQ_HASH_CTREPLSRC:
++	case TCA_SFQ_HASH_CTNATCHG:
++#ifndef CONFIG_NET_SCH_ESFQ_NFCT
++	{
++		if (net_ratelimit())
++			printk(KERN_WARNING "ESFQ: Conntrack hash types disabled in kernel config. Falling back to classic.\n");
++		return TCA_SFQ_HASH_CLASSIC;
++	}
++#endif
++	case TCA_SFQ_HASH_CLASSIC:
++	case TCA_SFQ_HASH_DST:
++	case TCA_SFQ_HASH_SRC:
++	case TCA_SFQ_HASH_FWMARK:
++		return kind;
++	default:
++	{
++		if (net_ratelimit())
++			printk(KERN_WARNING "ESFQ: Unknown hash type. Falling back to classic.\n");
++		return TCA_SFQ_HASH_CLASSIC;
++	}
++	}
++}
++
++static int esfq_q_init(struct esfq_sched_data *q, struct nlattr *opt)
++{
++	struct tc_esfq_qopt *ctl = nla_data(opt);
++	esfq_index p = ~0U/2;
++	int i;
++
++	if (opt && opt->nla_len < nla_attr_size(sizeof(*ctl)))
++		return -EINVAL;
++
++	q->perturbation = 0;
++	q->hash_kind = TCA_SFQ_HASH_CLASSIC;
++	q->max_depth = 0;
++	if (opt == NULL) {
++		q->perturb_period = 0;
++		q->hash_divisor = 1024;
++		q->tail = q->limit = q->depth = 128;
++
++	} else {
++		struct tc_esfq_qopt *ctl = nla_data(opt);
++		if (ctl->quantum)
++			q->quantum = ctl->quantum;
++		q->perturb_period = ctl->perturb_period*HZ;
++		q->hash_divisor = ctl->divisor ? : 1024;
++		q->tail = q->limit = q->depth = ctl->flows ? : 128;
++
++		if ( q->depth > p - 1 )
++			return -EINVAL;
++
++		if (ctl->limit)
++			q->limit = min_t(u32, ctl->limit, q->depth);
++
++		if (ctl->hash_kind) {
++			q->hash_kind = esfq_check_hash(ctl->hash_kind);
++		}
++	}
++
++	q->ht = kmalloc(q->hash_divisor*sizeof(esfq_index), GFP_KERNEL);
++	if (!q->ht)
++		goto err_case;
++	q->dep = kmalloc((1+q->depth*2)*sizeof(struct esfq_head), GFP_KERNEL);
++	if (!q->dep)
++		goto err_case;
++	q->next = kmalloc(q->depth*sizeof(esfq_index), GFP_KERNEL);
++	if (!q->next)
++		goto err_case;
++	q->allot = kmalloc(q->depth*sizeof(short), GFP_KERNEL);
++	if (!q->allot)
++		goto err_case;
++	q->hash = kmalloc(q->depth*sizeof(unsigned short), GFP_KERNEL);
++	if (!q->hash)
++		goto err_case;
++	q->qs = kmalloc(q->depth*sizeof(struct sk_buff_head), GFP_KERNEL);
++	if (!q->qs)
++		goto err_case;
++
++	for (i=0; i< q->hash_divisor; i++)
++		q->ht[i] = q->depth;
++	for (i=0; i<q->depth; i++) {
++		skb_queue_head_init(&q->qs[i]);
++		q->dep[i+q->depth].next = i+q->depth;
++		q->dep[i+q->depth].prev = i+q->depth;
++	}
++
++	for (i=0; i<q->depth; i++)
++		esfq_link(q, i);
++	return 0;
++err_case:
++	esfq_q_destroy(q);
++	return -ENOBUFS;
++}
++
++static int esfq_init(struct Qdisc *sch, struct nlattr *opt)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	int err;
++
++	q->quantum = psched_mtu(qdisc_dev(sch)); /* default */
++	if ((err = esfq_q_init(q, opt)))
++		return err;
++
++	init_timer(&q->perturb_timer);
++	q->perturb_timer.data = (unsigned long)sch;
++	q->perturb_timer.function = esfq_perturbation;
++	if (q->perturb_period) {
++		q->perturb_timer.expires = jiffies + q->perturb_period;
++		add_timer(&q->perturb_timer);
++	}
++
++	return 0;
++}
++
++static int esfq_change(struct Qdisc *sch, struct nlattr *opt)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	struct esfq_sched_data new;
++	struct sk_buff *skb;
++	int err;
++
++	/* set up new queue */
++	memset(&new, 0, sizeof(struct esfq_sched_data));
++	new.quantum = psched_mtu(qdisc_dev(sch)); /* default */
++	if ((err = esfq_q_init(&new, opt)))
++		return err;
++
++	/* copy all packets from the old queue to the new queue */
++	sch_tree_lock(sch);
++	while ((skb = esfq_q_dequeue(q)) != NULL)
++		esfq_q_enqueue(skb, &new, ESFQ_TAIL);
++
++	/* clean up the old queue */
++	esfq_q_destroy(q);
++
++	/* copy elements of the new queue into the old queue */
++	q->perturb_period = new.perturb_period;
++	q->quantum        = new.quantum;
++	q->limit          = new.limit;
++	q->depth          = new.depth;
++	q->hash_divisor   = new.hash_divisor;
++	q->hash_kind      = new.hash_kind;
++	q->tail           = new.tail;
++	q->max_depth      = new.max_depth;
++	q->ht    = new.ht;
++	q->dep   = new.dep;
++	q->next  = new.next;
++	q->allot = new.allot;
++	q->hash  = new.hash;
++	q->qs    = new.qs;
++
++	/* finish up */
++	if (q->perturb_period) {
++		q->perturb_timer.expires = jiffies + q->perturb_period;
++		add_timer(&q->perturb_timer);
++	} else {
++		q->perturbation = 0;
++	}
++	sch_tree_unlock(sch);
++	return 0;
++}
++
++static int esfq_dump(struct Qdisc *sch, struct sk_buff *skb)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	unsigned char *b = skb_tail_pointer(skb);
++	struct tc_esfq_qopt opt;
++
++	opt.quantum = q->quantum;
++	opt.perturb_period = q->perturb_period/HZ;
++
++	opt.limit = q->limit;
++	opt.divisor = q->hash_divisor;
++	opt.flows = q->depth;
++	opt.hash_kind = q->hash_kind;
++
++	NLA_PUT(skb, TCA_OPTIONS, sizeof(opt), &opt);
++
++	return skb->len;
++
++nla_put_failure:
++	nlmsg_trim(skb, b);
++	return -1;
++}
++
++static struct Qdisc_ops esfq_qdisc_ops =
++{
++	.next		=	NULL,
++	.cl_ops		=	NULL,
++	.id		=	"esfq",
++	.priv_size	=	sizeof(struct esfq_sched_data),
++	.enqueue	=	esfq_enqueue,
++	.dequeue	=	esfq_dequeue,
++	.peek		=	esfq_peek,
++	.drop		=	esfq_drop,
++	.init		=	esfq_init,
++	.reset		=	esfq_reset,
++	.destroy	=	esfq_destroy,
++	.change		=	esfq_change,
++	.dump		=	esfq_dump,
++	.owner		=	THIS_MODULE,
++};
++
++static int __init esfq_module_init(void)
++{
++	return register_qdisc(&esfq_qdisc_ops);
++}
++static void __exit esfq_module_exit(void)
++{
++	unregister_qdisc(&esfq_qdisc_ops);
++}
++module_init(esfq_module_init)
++module_exit(esfq_module_exit)
++MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/patches-2.6.34/201-jhash3.patch b/target/linux/generic/patches-2.6.34/201-jhash3.patch
new file mode 100644
index 0000000000..0218fa19c5
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/201-jhash3.patch
@@ -0,0 +1,227 @@
+--- a/include/linux/jhash.h
++++ b/include/linux/jhash.h
+@@ -3,80 +3,95 @@
+ 
+ /* jhash.h: Jenkins hash support.
+  *
+- * Copyright (C) 1996 Bob Jenkins (bob_jenkins@burtleburtle.net)
++ * Copyright (C) 2006. Bob Jenkins (bob_jenkins@burtleburtle.net)
+  *
+  * http://burtleburtle.net/bob/hash/
+  *
+  * These are the credits from Bob's sources:
+  *
+- * lookup2.c, by Bob Jenkins, December 1996, Public Domain.
+- * hash(), hash2(), hash3, and mix() are externally useful functions.
+- * Routines to test the hash are included if SELF_TEST is defined.
+- * You can use this free for any purpose.  It has no warranty.
++ * lookup3.c, by Bob Jenkins, May 2006, Public Domain.
+  *
+- * Copyright (C) 2003 David S. Miller (davem@redhat.com)
++ * These are functions for producing 32-bit hashes for hash table lookup.
++ * hashword(), hashlittle(), hashlittle2(), hashbig(), mix(), and final() 
++ * are externally useful functions.  Routines to test the hash are included 
++ * if SELF_TEST is defined.  You can use this free for any purpose.  It's in
++ * the public domain.  It has no warranty.
++ *
++ * Copyright (C) 2009 Jozsef Kadlecsik (kadlec@blackhole.kfki.hu)
+  *
+  * I've modified Bob's hash to be useful in the Linux kernel, and
+- * any bugs present are surely my fault.  -DaveM
++ * any bugs present are my fault.  Jozsef
+  */
+ 
+-/* NOTE: Arguments are modified. */
+-#define __jhash_mix(a, b, c) \
++#define __rot(x,k) (((x)<<(k)) | ((x)>>(32-(k))))
++
++/* __jhash_mix - mix 3 32-bit values reversibly. */
++#define __jhash_mix(a,b,c) \
++{ \
++  a -= c;  a ^= __rot(c, 4);  c += b; \
++  b -= a;  b ^= __rot(a, 6);  a += c; \
++  c -= b;  c ^= __rot(b, 8);  b += a; \
++  a -= c;  a ^= __rot(c,16);  c += b; \
++  b -= a;  b ^= __rot(a,19);  a += c; \
++  c -= b;  c ^= __rot(b, 4);  b += a; \
++}
++
++/* __jhash_final - final mixing of 3 32-bit values (a,b,c) into c */
++#define __jhash_final(a,b,c) \
+ { \
+-  a -= b; a -= c; a ^= (c>>13); \
+-  b -= c; b -= a; b ^= (a<<8); \
+-  c -= a; c -= b; c ^= (b>>13); \
+-  a -= b; a -= c; a ^= (c>>12);  \
+-  b -= c; b -= a; b ^= (a<<16); \
+-  c -= a; c -= b; c ^= (b>>5); \
+-  a -= b; a -= c; a ^= (c>>3);  \
+-  b -= c; b -= a; b ^= (a<<10); \
+-  c -= a; c -= b; c ^= (b>>15); \
++  c ^= b; c -= __rot(b,14); \
++  a ^= c; a -= __rot(c,11); \
++  b ^= a; b -= __rot(a,25); \
++  c ^= b; c -= __rot(b,16); \
++  a ^= c; a -= __rot(c,4);  \
++  b ^= a; b -= __rot(a,14); \
++  c ^= b; c -= __rot(b,24); \
+ }
+ 
+-/* The golden ration: an arbitrary value */
+-#define JHASH_GOLDEN_RATIO	0x9e3779b9
++/* An arbitrary initial parameter */
++#define JHASH_GOLDEN_RATIO	0xdeadbeef
+ 
+ /* The most generic version, hashes an arbitrary sequence
+  * of bytes.  No alignment or length assumptions are made about
+- * the input key.
++ * the input key. The result depends on endianness.
+  */
+ static inline u32 jhash(const void *key, u32 length, u32 initval)
+ {
+-	u32 a, b, c, len;
++	u32 a,b,c;
+ 	const u8 *k = key;
+ 
+-	len = length;
+-	a = b = JHASH_GOLDEN_RATIO;
+-	c = initval;
+-
+-	while (len >= 12) {
+-		a += (k[0] +((u32)k[1]<<8) +((u32)k[2]<<16) +((u32)k[3]<<24));
+-		b += (k[4] +((u32)k[5]<<8) +((u32)k[6]<<16) +((u32)k[7]<<24));
+-		c += (k[8] +((u32)k[9]<<8) +((u32)k[10]<<16)+((u32)k[11]<<24));
+-
+-		__jhash_mix(a,b,c);
++	/* Set up the internal state */
++	a = b = c = JHASH_GOLDEN_RATIO + length + initval;
+ 
++	/* all but the last block: affect some 32 bits of (a,b,c) */
++	while (length > 12) {
++    		a += (k[0] + ((u32)k[1]<<8) + ((u32)k[2]<<16) + ((u32)k[3]<<24));
++		b += (k[4] + ((u32)k[5]<<8) + ((u32)k[6]<<16) + ((u32)k[7]<<24));
++		c += (k[8] + ((u32)k[9]<<8) + ((u32)k[10]<<16) + ((u32)k[11]<<24));
++		__jhash_mix(a, b, c);
++		length -= 12;
+ 		k += 12;
+-		len -= 12;
+ 	}
+ 
+-	c += length;
+-	switch (len) {
+-	case 11: c += ((u32)k[10]<<24);
+-	case 10: c += ((u32)k[9]<<16);
+-	case 9 : c += ((u32)k[8]<<8);
+-	case 8 : b += ((u32)k[7]<<24);
+-	case 7 : b += ((u32)k[6]<<16);
+-	case 6 : b += ((u32)k[5]<<8);
++	/* last block: affect all 32 bits of (c) */
++	/* all the case statements fall through */
++	switch (length) {
++	case 12: c += (u32)k[11]<<24;
++	case 11: c += (u32)k[10]<<16;
++	case 10: c += (u32)k[9]<<8;
++	case 9 : c += k[8];
++	case 8 : b += (u32)k[7]<<24;
++	case 7 : b += (u32)k[6]<<16;
++	case 6 : b += (u32)k[5]<<8;
+ 	case 5 : b += k[4];
+-	case 4 : a += ((u32)k[3]<<24);
+-	case 3 : a += ((u32)k[2]<<16);
+-	case 2 : a += ((u32)k[1]<<8);
++	case 4 : a += (u32)k[3]<<24;
++	case 3 : a += (u32)k[2]<<16;
++	case 2 : a += (u32)k[1]<<8;
+ 	case 1 : a += k[0];
+-	};
+-
+-	__jhash_mix(a,b,c);
++		__jhash_final(a, b, c);
++	case 0 :
++		break;
++	}
+ 
+ 	return c;
+ }
+@@ -86,58 +101,57 @@ static inline u32 jhash(const void *key,
+  */
+ static inline u32 jhash2(const u32 *k, u32 length, u32 initval)
+ {
+-	u32 a, b, c, len;
++	u32 a, b, c;
+ 
+-	a = b = JHASH_GOLDEN_RATIO;
+-	c = initval;
+-	len = length;
++	/* Set up the internal state */
++	a = b = c = JHASH_GOLDEN_RATIO + (length<<2) + initval;
+ 
+-	while (len >= 3) {
++	/* handle most of the key */
++	while (length > 3) {
+ 		a += k[0];
+ 		b += k[1];
+ 		c += k[2];
+ 		__jhash_mix(a, b, c);
+-		k += 3; len -= 3;
++		length -= 3;
++		k += 3;
+ 	}
+ 
+-	c += length * 4;
+-
+-	switch (len) {
+-	case 2 : b += k[1];
+-	case 1 : a += k[0];
+-	};
+-
+-	__jhash_mix(a,b,c);
++	/* handle the last 3 u32's */
++	/* all the case statements fall through */ 
++	switch (length) {
++	case 3: c += k[2];
++	case 2: b += k[1];
++	case 1: a += k[0];
++		__jhash_final(a, b, c);
++	case 0:     /* case 0: nothing left to add */
++		break;
++	}
+ 
+ 	return c;
+ }
+ 
+-
+ /* A special ultra-optimized versions that knows they are hashing exactly
+  * 3, 2 or 1 word(s).
+- *
+- * NOTE: In partilar the "c += length; __jhash_mix(a,b,c);" normally
+- *       done at the end is not done here.
+  */
+ static inline u32 jhash_3words(u32 a, u32 b, u32 c, u32 initval)
+ {
+-	a += JHASH_GOLDEN_RATIO;
+-	b += JHASH_GOLDEN_RATIO;
+-	c += initval;
++	a += JHASH_GOLDEN_RATIO + initval;
++	b += JHASH_GOLDEN_RATIO + initval;
++	c += JHASH_GOLDEN_RATIO + initval;
+ 
+-	__jhash_mix(a, b, c);
++	__jhash_final(a, b, c);
+ 
+ 	return c;
+ }
+ 
+ static inline u32 jhash_2words(u32 a, u32 b, u32 initval)
+ {
+-	return jhash_3words(a, b, 0, initval);
++	return jhash_3words(0, a, b, initval);
+ }
+ 
+ static inline u32 jhash_1word(u32 a, u32 initval)
+ {
+-	return jhash_3words(a, 0, 0, initval);
++	return jhash_3words(0, 0, a, initval);
+ }
+ 
+ #endif /* _LINUX_JHASH_H */
diff --git a/target/linux/generic/patches-2.6.34/202-mips_mem_functions_performance.patch b/target/linux/generic/patches-2.6.34/202-mips_mem_functions_performance.patch
new file mode 100644
index 0000000000..e4324717b4
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/202-mips_mem_functions_performance.patch
@@ -0,0 +1,83 @@
+--- a/arch/mips/include/asm/string.h
++++ b/arch/mips/include/asm/string.h
+@@ -133,11 +133,44 @@ strncmp(__const__ char *__cs, __const__
+ 
+ #define __HAVE_ARCH_MEMSET
+ extern void *memset(void *__s, int __c, size_t __count);
++#define memset(__s, __c, len)					\
++({								\
++	size_t __len = (len);					\
++	void *__ret;						\
++	if (__builtin_constant_p(len) && __len >= 64)		\
++		__ret = memset((__s), (__c), __len);		\
++	else							\
++		__ret = __builtin_memset((__s), (__c), __len);	\
++	__ret;							\
++})
+ 
+ #define __HAVE_ARCH_MEMCPY
+ extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
++#define memcpy(dst, src, len)					\
++({								\
++	size_t __len = (len);					\
++	void *__ret;						\
++	if (__builtin_constant_p(len) && __len >= 64)		\
++		__ret = memcpy((dst), (src), __len);		\
++	else							\
++		__ret = __builtin_memcpy((dst), (src), __len);	\
++	__ret;							\
++})
+ 
+ #define __HAVE_ARCH_MEMMOVE
+ extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
++#define memmove(dst, src, len)					\
++({								\
++	size_t __len = (len);					\
++	void *__ret;						\
++	if (__builtin_constant_p(len) && __len >= 64)		\
++		__ret = memmove((dst), (src), __len);		\
++	else							\
++		__ret = __builtin_memmove((dst), (src), __len);	\
++	__ret;							\
++})
++
++#define __HAVE_ARCH_MEMCMP
++#define memcmp(src1, src2, len) __builtin_memcmp((src1), (src2), (len))
+ 
+ #endif /* _ASM_STRING_H */
+--- a/arch/mips/lib/Makefile
++++ b/arch/mips/lib/Makefile
+@@ -3,7 +3,7 @@
+ #
+ 
+ lib-y	+= csum_partial.o delay.o memcpy.o memcpy-inatomic.o memset.o \
+-	   strlen_user.o strncpy_user.o strnlen_user.o uncached.o
++	   strlen_user.o strncpy_user.o strnlen_user.o uncached.o memcmp.o
+ 
+ obj-y			+= iomap.o
+ obj-$(CONFIG_PCI)	+= iomap-pci.o
+--- /dev/null
++++ b/arch/mips/lib/memcmp.c
+@@ -0,0 +1,22 @@
++/*
++ *  copied from linux/lib/string.c
++ *
++ *  Copyright (C) 1991, 1992  Linus Torvalds
++ */
++
++#include <linux/module.h>
++#include <linux/string.h>
++
++#undef memcmp
++int memcmp(const void *cs, const void *ct, size_t count)
++{
++	const unsigned char *su1, *su2;
++	int res = 0;
++
++	for (su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--)
++		if ((res = *su1 - *su2) != 0)
++			break;
++	return res;
++}
++EXPORT_SYMBOL(memcmp);
++
diff --git a/target/linux/generic/patches-2.6.34/203-slab_maxsize.patch b/target/linux/generic/patches-2.6.34/203-slab_maxsize.patch
new file mode 100644
index 0000000000..fe8cecfc77
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/203-slab_maxsize.patch
@@ -0,0 +1,13 @@
+--- a/include/linux/slab.h
++++ b/include/linux/slab.h
+@@ -130,8 +130,8 @@ int kmem_ptr_validate(struct kmem_cache
+  * to do various tricks to work around compiler limitations in order to
+  * ensure proper constant folding.
+  */
+-#define KMALLOC_SHIFT_HIGH	((MAX_ORDER + PAGE_SHIFT - 1) <= 25 ? \
+-				(MAX_ORDER + PAGE_SHIFT - 1) : 25)
++#define KMALLOC_SHIFT_HIGH	((MAX_ORDER + PAGE_SHIFT - 1) <= 17 ? \
++				(MAX_ORDER + PAGE_SHIFT - 1) : 17)
+ 
+ #define KMALLOC_MAX_SIZE	(1UL << KMALLOC_SHIFT_HIGH)
+ #define KMALLOC_MAX_ORDER	(KMALLOC_SHIFT_HIGH - PAGE_SHIFT)
diff --git a/target/linux/generic/patches-2.6.34/204-jffs2_eofdetect.patch b/target/linux/generic/patches-2.6.34/204-jffs2_eofdetect.patch
new file mode 100644
index 0000000000..16d3e1f8e8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/204-jffs2_eofdetect.patch
@@ -0,0 +1,132 @@
+--- a/fs/jffs2/build.c
++++ b/fs/jffs2/build.c
+@@ -111,6 +111,17 @@ static int jffs2_build_filesystem(struct
+ 	dbg_fsbuild("scanned flash completely\n");
+ 	jffs2_dbg_dump_block_lists_nolock(c);
+ 
++	if (c->flags & (1 << 7)) {
++		printk("%s(): unlocking the mtd device... ", __func__);
++		if (c->mtd->unlock)
++			c->mtd->unlock(c->mtd, 0, c->mtd->size);
++		printk("done.\n");
++
++		printk("%s(): erasing all blocks after the end marker... ", __func__);
++		jffs2_erase_pending_blocks(c, -1);
++		printk("done.\n");
++	}
++
+ 	dbg_fsbuild("pass 1 starting\n");
+ 	c->flags |= JFFS2_SB_FLAG_BUILDING;
+ 	/* Now scan the directory tree, increasing nlink according to every dirent found. */
+--- a/fs/jffs2/scan.c
++++ b/fs/jffs2/scan.c
+@@ -72,7 +72,7 @@ static int file_dirty(struct jffs2_sb_in
+ 		return ret;
+ 	if ((ret = jffs2_scan_dirty_space(c, jeb, jeb->free_size)))
+ 		return ret;
+-	/* Turned wasted size into dirty, since we apparently 
++	/* Turned wasted size into dirty, since we apparently
+ 	   think it's recoverable now. */
+ 	jeb->dirty_size += jeb->wasted_size;
+ 	c->dirty_size += jeb->wasted_size;
+@@ -144,8 +144,11 @@ int jffs2_scan_medium(struct jffs2_sb_in
+ 		/* reset summary info for next eraseblock scan */
+ 		jffs2_sum_reset_collected(s);
+ 
+-		ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
+-						buf_size, s);
++		if (c->flags & (1 << 7))
++			ret = BLK_STATE_ALLFF;
++		else
++			ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
++							buf_size, s);
+ 
+ 		if (ret < 0)
+ 			goto out;
+@@ -400,7 +403,7 @@ static int jffs2_scan_xref_node(struct j
+ 	if (!ref)
+ 		return -ENOMEM;
+ 
+-	/* BEFORE jffs2_build_xattr_subsystem() called, 
++	/* BEFORE jffs2_build_xattr_subsystem() called,
+ 	 * and AFTER xattr_ref is marked as a dead xref,
+ 	 * ref->xid is used to store 32bit xid, xd is not used
+ 	 * ref->ino is used to store 32bit inode-number, ic is not used
+@@ -473,7 +476,7 @@ static int jffs2_scan_eraseblock (struct
+ 		struct jffs2_sum_marker *sm;
+ 		void *sumptr = NULL;
+ 		uint32_t sumlen;
+-	      
++
+ 		if (!buf_size) {
+ 			/* XIP case. Just look, point at the summary if it's there */
+ 			sm = (void *)buf + c->sector_size - sizeof(*sm);
+@@ -489,9 +492,9 @@ static int jffs2_scan_eraseblock (struct
+ 				buf_len = sizeof(*sm);
+ 
+ 			/* Read as much as we want into the _end_ of the preallocated buffer */
+-			err = jffs2_fill_scan_buf(c, buf + buf_size - buf_len, 
++			err = jffs2_fill_scan_buf(c, buf + buf_size - buf_len,
+ 						  jeb->offset + c->sector_size - buf_len,
+-						  buf_len);				
++						  buf_len);
+ 			if (err)
+ 				return err;
+ 
+@@ -510,9 +513,9 @@ static int jffs2_scan_eraseblock (struct
+ 				}
+ 				if (buf_len < sumlen) {
+ 					/* Need to read more so that the entire summary node is present */
+-					err = jffs2_fill_scan_buf(c, sumptr, 
++					err = jffs2_fill_scan_buf(c, sumptr,
+ 								  jeb->offset + c->sector_size - sumlen,
+-								  sumlen - buf_len);				
++								  sumlen - buf_len);
+ 					if (err)
+ 						return err;
+ 				}
+@@ -525,7 +528,7 @@ static int jffs2_scan_eraseblock (struct
+ 
+ 			if (buf_size && sumlen > buf_size)
+ 				kfree(sumptr);
+-			/* If it returns with a real error, bail. 
++			/* If it returns with a real error, bail.
+ 			   If it returns positive, that's a block classification
+ 			   (i.e. BLK_STATE_xxx) so return that too.
+ 			   If it returns zero, fall through to full scan. */
+@@ -546,6 +549,17 @@ static int jffs2_scan_eraseblock (struct
+ 			return err;
+ 	}
+ 
++	if ((buf[0] == 0xde) &&
++		(buf[1] == 0xad) &&
++		(buf[2] == 0xc0) &&
++		(buf[3] == 0xde)) {
++		/* end of filesystem. erase everything after this point */
++		printk("%s(): End of filesystem marker found at 0x%x\n", __func__, jeb->offset);
++		c->flags |= (1 << 7);
++
++		return BLK_STATE_ALLFF;
++	}
++
+ 	/* We temporarily use 'ofs' as a pointer into the buffer/jeb */
+ 	ofs = 0;
+ 
+@@ -671,7 +685,7 @@ scan_more:
+ 				scan_end = buf_len;
+ 				goto more_empty;
+ 			}
+-			
++
+ 			/* See how much more there is to read in this eraseblock... */
+ 			buf_len = min_t(uint32_t, buf_size, jeb->offset + c->sector_size - ofs);
+ 			if (!buf_len) {
+@@ -907,7 +921,7 @@ scan_more:
+ 
+ 	D1(printk(KERN_DEBUG "Block at 0x%08x: free 0x%08x, dirty 0x%08x, unchecked 0x%08x, used 0x%08x, wasted 0x%08x\n",
+ 		  jeb->offset,jeb->free_size, jeb->dirty_size, jeb->unchecked_size, jeb->used_size, jeb->wasted_size));
+-	
++
+ 	/* mark_node_obsolete can add to wasted !! */
+ 	if (jeb->wasted_size) {
+ 		jeb->dirty_size += jeb->wasted_size;
diff --git a/target/linux/generic/patches-2.6.34/205-skb_padding.patch b/target/linux/generic/patches-2.6.34/205-skb_padding.patch
new file mode 100644
index 0000000000..adbe7021df
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/205-skb_padding.patch
@@ -0,0 +1,56 @@
+--- a/include/linux/skbuff.h
++++ b/include/linux/skbuff.h
+@@ -1372,11 +1372,18 @@ static inline int skb_network_offset(con
+  *
+  * Various parts of the networking layer expect at least 32 bytes of
+  * headroom, you should not reduce this.
++ *
++ * This has been changed to 64 to acommodate for routing between ethernet
++ * and wireless, but only for new allocations
+  */
+ #ifndef NET_SKB_PAD
+ #define NET_SKB_PAD	32
+ #endif
+ 
++#ifndef NET_SKB_PAD_ALLOC
++#define NET_SKB_PAD_ALLOC	64
++#endif
++
+ extern int ___pskb_trim(struct sk_buff *skb, unsigned int len);
+ 
+ static inline void __skb_trim(struct sk_buff *skb, unsigned int len)
+@@ -1466,9 +1473,9 @@ static inline void __skb_queue_purge(str
+ static inline struct sk_buff *__dev_alloc_skb(unsigned int length,
+ 					      gfp_t gfp_mask)
+ {
+-	struct sk_buff *skb = alloc_skb(length + NET_SKB_PAD, gfp_mask);
++	struct sk_buff *skb = alloc_skb(length + NET_SKB_PAD_ALLOC, gfp_mask);
+ 	if (likely(skb))
+-		skb_reserve(skb, NET_SKB_PAD);
++		skb_reserve(skb, NET_SKB_PAD_ALLOC);
+ 	return skb;
+ }
+ 
+@@ -1551,7 +1558,7 @@ static inline int __skb_cow(struct sk_bu
+ 		delta = headroom - skb_headroom(skb);
+ 
+ 	if (delta || cloned)
+-		return pskb_expand_head(skb, ALIGN(delta, NET_SKB_PAD), 0,
++		return pskb_expand_head(skb, ALIGN(delta, NET_SKB_PAD_ALLOC), 0,
+ 					GFP_ATOMIC);
+ 	return 0;
+ }
+--- a/net/core/skbuff.c
++++ b/net/core/skbuff.c
+@@ -339,9 +339,9 @@ struct sk_buff *__netdev_alloc_skb(struc
+ 	int node = dev->dev.parent ? dev_to_node(dev->dev.parent) : -1;
+ 	struct sk_buff *skb;
+ 
+-	skb = __alloc_skb(length + NET_SKB_PAD, gfp_mask, 0, node);
++	skb = __alloc_skb(length + NET_SKB_PAD_ALLOC, gfp_mask, 0, node);
+ 	if (likely(skb)) {
+-		skb_reserve(skb, NET_SKB_PAD);
++		skb_reserve(skb, NET_SKB_PAD_ALLOC);
+ 		skb->dev = dev;
+ 	}
+ 	return skb;
diff --git a/target/linux/generic/patches-2.6.34/207-powerpc_asm_segment_h.patch b/target/linux/generic/patches-2.6.34/207-powerpc_asm_segment_h.patch
new file mode 100644
index 0000000000..1272e82c75
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/207-powerpc_asm_segment_h.patch
@@ -0,0 +1,9 @@
+--- /dev/null
++++ b/include/asm-powerpc/segment.h
+@@ -0,0 +1,6 @@
++#ifndef _ASM_SEGMENT_H
++#define _ASM_SEGMENT_H
++
++/* Only here because we have some old header files that expect it.. */
++
++#endif /* _ASM_SEGMENT_H */
diff --git a/target/linux/generic/patches-2.6.34/208-mips_oprofile_fix.patch b/target/linux/generic/patches-2.6.34/208-mips_oprofile_fix.patch
new file mode 100644
index 0000000000..0cbf4ed32b
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/208-mips_oprofile_fix.patch
@@ -0,0 +1,48 @@
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -49,7 +49,9 @@ ifneq ($(SUBARCH),$(ARCH))
+ endif
+ 
+ ifndef CONFIG_FUNCTION_TRACER
+-cflags-y := -ffunction-sections
++  ifndef CONFIG_PROFILING
++    cflags-y := -ffunction-sections
++  endif
+ endif
+ ifdef CONFIG_FUNCTION_GRAPH_TRACER
+   ifndef KBUILD_MCOUNT_RA_ADDRESS
+--- a/arch/mips/oprofile/op_model_mipsxx.c
++++ b/arch/mips/oprofile/op_model_mipsxx.c
+@@ -298,6 +298,11 @@ static void reset_counters(void *arg)
+ 	}
+ }
+ 
++static irqreturn_t mipsxx_perfcount_int(int irq, void *dev_id)
++{
++	return mipsxx_perfcount_handler();
++}
++
+ static int __init mipsxx_init(void)
+ {
+ 	int counters;
+@@ -374,6 +379,10 @@ static int __init mipsxx_init(void)
+ 	save_perf_irq = perf_irq;
+ 	perf_irq = mipsxx_perfcount_handler;
+ 
++	if (cp0_perfcount_irq >= 0)
++		return request_irq(cp0_perfcount_irq, mipsxx_perfcount_int,
++			IRQF_SHARED, "Perfcounter", save_perf_irq);
++
+ 	return 0;
+ }
+ 
+@@ -381,6 +390,9 @@ static void mipsxx_exit(void)
+ {
+ 	int counters = op_model_mipsxx_ops.num_counters;
+ 
++	if (cp0_perfcount_irq >= 0)
++		free_irq(cp0_perfcount_irq, save_perf_irq);
++
+ 	counters = counters_per_cpu_to_total(counters);
+ 	on_each_cpu(reset_counters, (void *)(long)counters, 1);
+ 
diff --git a/target/linux/generic/patches-2.6.34/209-mini_fo.patch b/target/linux/generic/patches-2.6.34/209-mini_fo.patch
new file mode 100644
index 0000000000..d7e3220d24
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/209-mini_fo.patch
@@ -0,0 +1,7782 @@
+--- a/fs/Kconfig
++++ b/fs/Kconfig
+@@ -181,6 +181,7 @@ source "fs/logfs/Kconfig"
+ source "fs/cramfs/Kconfig"
+ source "fs/squashfs/Kconfig"
+ source "fs/freevxfs/Kconfig"
++source "fs/mini_fo/Kconfig"
+ source "fs/minix/Kconfig"
+ source "fs/omfs/Kconfig"
+ source "fs/hpfs/Kconfig"
+--- a/fs/Makefile
++++ b/fs/Makefile
+@@ -77,6 +77,7 @@ obj-$(CONFIG_SQUASHFS)		+= squashfs/
+ obj-y				+= ramfs/
+ obj-$(CONFIG_HUGETLBFS)		+= hugetlbfs/
+ obj-$(CONFIG_CODA_FS)		+= coda/
++obj-$(CONFIG_MINI_FO)		+= mini_fo/
+ obj-$(CONFIG_MINIX_FS)		+= minix/
+ obj-$(CONFIG_FAT_FS)		+= fat/
+ obj-$(CONFIG_BFS_FS)		+= bfs/
+--- /dev/null
++++ b/fs/mini_fo/aux.c
+@@ -0,0 +1,577 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++
++/* check if file exists in storage  */
++int exists_in_storage(dentry_t *dentry)
++{
++	check_mini_fo_dentry(dentry);
++	if(dtost(dentry) == MODIFIED || dtost(dentry) == CREATED || dtost(dentry) == DEL_REWRITTEN)
++		return 1;
++	return 0;
++}
++
++/* check if dentry is in an existing state */
++int is_mini_fo_existant(dentry_t *dentry)
++{
++	check_mini_fo_dentry(dentry);
++
++	if(dtost(dentry) == DELETED || dtost(dentry) == NON_EXISTANT)
++		return 0;
++	else
++		return 1;
++}
++
++/*
++ * This function will create a negative storage dentry for
++ * dentry, what is required for many create like options.
++ * It will create the storage structure if necessary.
++ */
++int get_neg_sto_dentry(dentry_t *dentry)
++{
++	int err = 0;
++	unsigned int len;
++	const unsigned char *name;
++
++	if(!dentry ||
++	   !dtopd(dentry) ||
++	   !(dtost(dentry) == UNMODIFIED ||
++	     dtost(dentry) == NON_EXISTANT ||
++	     dtost(dentry) == DELETED)) {
++		printk(KERN_CRIT "mini_fo: get_neg_sto_dentry: invalid dentry passed.\n");
++		err = -1;
++		goto out;
++	}
++	/* Have we got a neg. dentry already? */
++	if(dtohd2(dentry)) {
++		err = 0;
++		goto out;
++	}
++	if(dtost(dentry->d_parent) == UNMODIFIED) {
++		/* build sto struct */
++		err = build_sto_structure(dentry->d_parent->d_parent, dentry->d_parent);
++		if(err ||
++		   dtost(dentry->d_parent) != MODIFIED) {
++			printk(KERN_CRIT "mini_fo: get_neg_sto_dentry: ERROR building sto structure.\n");
++			err = -1;
++			goto out;
++		}
++	}
++
++	len = dentry->d_name.len;
++	name = dentry->d_name.name;
++
++	dtohd2(dentry) =
++		lookup_one_len(name, dtohd2(dentry->d_parent), len);
++
++ out:
++	return err;
++}
++
++int check_mini_fo_dentry(dentry_t *dentry)
++{
++ 	ASSERT(dentry != NULL);
++	ASSERT(dtopd(dentry) != NULL);
++	ASSERT((dtohd(dentry) != NULL) || (dtohd2(dentry) != NULL));
++
++/* 	if(dtost(dentry) == MODIFIED) { */
++/* 		ASSERT(dentry->d_inode != NULL); */
++/* 		ASSERT(dtohd(dentry) != NULL); */
++/* 		ASSERT(dtohd(dentry)->d_inode != NULL); */
++/* 		ASSERT(dtohd2(dentry) != NULL); */
++/* 		ASSERT(dtohd2(dentry)->d_inode != NULL); */
++/* 	} */
++/* 	else if(dtost(dentry) == UNMODIFIED) { */
++/* 		ASSERT(dentry->d_inode != NULL); */
++/* 		ASSERT( */
++/* 	} */
++	return 0;
++}
++
++int check_mini_fo_file(file_t *file)
++{
++	ASSERT(file != NULL);
++	ASSERT(ftopd(file) != NULL);
++	ASSERT(file->f_dentry != NULL);
++
++	/* violent checking, check depending of state and type
++	 *	if(S_ISDIR(file->f_dentry->d_inode->i_mode)) {}
++	 */
++	ASSERT((ftohf(file) != NULL) || (ftohf2(file) != NULL));
++	return 0;
++}
++
++int check_mini_fo_inode(inode_t *inode)
++{
++	ASSERT(inode != NULL);
++	ASSERT(itopd(inode) != NULL);
++	ASSERT((itohi(inode) != NULL) || (itohi2(inode) != NULL));
++	return 0;
++}
++
++/*
++ * will walk a base path as provided by get_mini_fo_bpath and return
++ * the (hopefully ;-) ) positive dentry of the renamed base dir.
++ *
++ * This does some work of path_init.
++ */
++dentry_t *bpath_walk(super_block_t *sb, char *bpath)
++{
++	int err;
++        struct vfsmount *mnt;
++	struct nameidata nd;
++
++	/* be paranoid */
++	if(!bpath || bpath[0] != '/') {
++		printk(KERN_CRIT "mini_fo: bpath_walk: Invalid string.\n");
++		return NULL;
++	}
++	if(!sb || !stopd(sb)) {
++		printk(KERN_CRIT "mini_fo: bpath_walk: Invalid sb.\n");
++		return NULL;
++	}
++
++	/* fix this: how do I reach this lock?
++	 * read_lock(&current->fs->lock); */
++	mnt = mntget(stopd(sb)->hidden_mnt);
++	/* read_unlock(&current->fs->lock); */
++
++	err = vfs_path_lookup(mnt->mnt_root, mnt, bpath+1, 0, &nd);
++
++	/* validate */
++	if (err || !nd.dentry || !nd.dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: bpath_walk: path_walk failed.\n");
++		return NULL;
++	}
++	return nd.dentry;
++}
++
++
++/* returns the full path of the basefile incl. its name */
++int get_mini_fo_bpath(dentry_t *dentry, char **bpath, int *bpath_len)
++{
++	char *buf_walker;
++	int len = 0;
++	dentry_t *sky_walker;
++
++	if(!dentry || !dtohd(dentry)) {
++		printk(KERN_CRIT "mini_fo: get_mini_fo_bpath: invalid dentry passed.\n");
++		return -1;
++	}
++	sky_walker = dtohd(dentry);
++
++	do {
++		len += sky_walker->d_name.len + 1 ; /* 1 for '/' */
++		sky_walker = sky_walker->d_parent;
++	} while(sky_walker != stopd(dentry->d_inode->i_sb)->base_dir_dentry);
++
++	/* 1 to oil the loop */
++	*bpath = (char*)  kmalloc(len + 1, GFP_KERNEL);
++	if(!*bpath) {
++		printk(KERN_CRIT "mini_fo: get_mini_fo_bpath: out of mem.\n");
++		return -1;
++	}
++	buf_walker = *bpath+len; /* put it on last char */
++	*buf_walker = '\n';
++	sky_walker = dtohd(dentry);
++
++	do {
++		buf_walker -= sky_walker->d_name.len;
++		strncpy(buf_walker,
++			sky_walker->d_name.name,
++			sky_walker->d_name.len);
++		*(--buf_walker) = '/';
++		sky_walker = sky_walker->d_parent;
++	} while(sky_walker != stopd(dentry->d_inode->i_sb)->base_dir_dentry);
++
++	/* bpath_len doesn't count newline! */
++	*bpath_len = len;
++ 	return 0;
++}
++
++int mini_fo_cp_cont(dentry_t *tgt_dentry, struct vfsmount *tgt_mnt,
++		    dentry_t *src_dentry, struct vfsmount *src_mnt)
++{
++	void *buf;
++	mm_segment_t old_fs;
++	file_t *tgt_file;
++	file_t *src_file;
++	int bytes, len, tmp, err;
++	err = 0;
++
++	if(!(tgt_dentry->d_inode && src_dentry->d_inode)) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR, neg. dentry passed.\n");
++		err = -EINVAL;
++		goto out;
++	}
++
++	dget(tgt_dentry);
++	dget(src_dentry);
++	mntget(tgt_mnt);
++	mntget(src_mnt);
++
++	/* open file write only */
++	tgt_file = dentry_open(tgt_dentry, tgt_mnt, 0x1);
++	if(!tgt_file || IS_ERR(tgt_file)) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR opening target file.\n");
++		err = PTR_ERR(tgt_file);
++		goto out_err;
++	}
++
++	/* open file read only */
++	src_file = dentry_open(src_dentry, src_mnt, 0x0);
++	if(!src_file || IS_ERR(src_file)) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR opening source file.\n");
++		err = PTR_ERR(src_file);
++
++		/* close target file */
++		fput(tgt_file);
++		goto out_err;
++	}
++
++	/* check if the filesystem(s) support read respective write */
++	if(!src_file->f_op->read || !tgt_file->f_op->write) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR, no fs read or write support.\n");
++		err = -EPERM;
++		goto out_close;
++	}
++
++	/* allocate a page for transfering the data */
++	buf = (void *) __get_free_page(GFP_KERNEL);
++	if(!buf) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR, out of kernel mem.\n");
++		goto out_err;
++	}
++
++	tgt_file->f_pos = 0;
++	src_file->f_pos = 0;
++
++	old_fs = get_fs();
++	set_fs(KERNEL_DS);
++
++	/* Doing this I assume that a read operation will return a full
++	 * buffer while there is still data to read, and a less than
++	 * full buffer when all data has been read.
++	 */
++	bytes = len = PAGE_SIZE;
++	while(bytes == len) {
++		bytes = src_file->f_op->read(src_file, buf, len,
++					     &src_file->f_pos);
++		tmp = tgt_file->f_op->write(tgt_file, buf, bytes,
++					    &tgt_file->f_pos);
++		if(tmp != bytes) {
++			printk(KERN_CRIT "mini_fo_cp_cont: ERROR writing.\n");
++			goto out_close_unset;
++		}
++	}
++
++	free_page((unsigned long) buf);
++	set_fs(old_fs);
++	fput(tgt_file);
++	fput(src_file);
++	goto out;
++
++ out_close_unset:
++	free_page((unsigned long) buf);
++	set_fs(old_fs);
++
++ out_close:
++	fput(tgt_file);
++	fput(src_file);
++
++ out_err:
++	dput(tgt_dentry);
++	dput(src_dentry);
++
++	/* mk: not sure if this need to be done */
++	mntput(tgt_mnt);
++	mntput(src_mnt);
++
++ out:
++	return err;
++}
++
++/* mk:
++ * ndl (no-duplicate list) stuff
++ * This is used in mini_fo_readdir, to save the storage directory contents
++ * and later when reading base, match them against the list in order
++ * to avoid duplicates.
++ */
++
++/* add a file specified by name and len to the ndl
++ * Return values: 0 on success, <0 on failure.
++ */
++int ndl_add_entry(struct readdir_data *rd, const char *name, int len)
++{
++	struct ndl_entry *tmp_entry;
++
++	tmp_entry = (struct ndl_entry *)
++		kmalloc(sizeof(struct ndl_entry), GFP_KERNEL);
++	if(!tmp_entry) {
++                printk(KERN_CRIT "mini_fo: ndl_add_entry: out of mem.\n");
++                return -ENOMEM;
++        }
++        tmp_entry->name = (char*) kmalloc(len, GFP_KERNEL);
++        if(!tmp_entry->name) {
++                printk(KERN_CRIT "mini_fo: ndl_add_entry: out of mem.\n");
++                return -ENOMEM;
++        }
++	strncpy(tmp_entry->name, name, len);
++        tmp_entry->len = len;
++
++        list_add(&tmp_entry->list, &rd->ndl_list);
++        rd->ndl_size++;
++        return 0;
++}
++
++/* delete all list entries and free memory */
++void ndl_put_list(struct readdir_data *rd)
++{
++	struct list_head *tmp;
++	struct ndl_entry *tmp_entry;
++
++	if(rd->ndl_size <= 0)
++		return;
++	while(!list_empty(&rd->ndl_list)) {
++		tmp = rd->ndl_list.next;
++                list_del(tmp);
++                tmp_entry = list_entry(tmp, struct ndl_entry, list);
++		kfree(tmp_entry->name);
++                kfree(tmp_entry);
++        }
++	rd->ndl_size = 0;
++}
++
++/* Check if a file specified by name and len is in the ndl
++ * Return value: 0 if not in list, 1 if file is found in ndl.
++ */
++int ndl_check_entry(struct readdir_data *rd, const char *name, int len)
++{
++	struct list_head *tmp;
++	struct ndl_entry *tmp_entry;
++
++	if(rd->ndl_size <= 0)
++		return 0;
++
++	list_for_each(tmp, &rd->ndl_list) {
++                tmp_entry = list_entry(tmp, struct ndl_entry, list);
++                if(tmp_entry->len != len)
++                        continue;
++                if(!strncmp(tmp_entry->name, name, len))
++                        return 1;
++        }
++        return 0;
++}
++
++/* mk:
++ * Recursive function to create corresponding directorys in the storage fs.
++ * The function will build the storage directorys up to dentry.
++ */
++int build_sto_structure(dentry_t *dir, dentry_t *dentry)
++{
++	int err;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++
++	if(dentry->d_parent != dir) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: invalid parameter or meta data corruption [1].\n");
++		return 1;
++	}
++
++       	if(dtost(dir) != MODIFIED) {
++		err = build_sto_structure(dir->d_parent, dentry->d_parent);
++		if(err)
++			return err;
++	}
++
++	/* ok, coming back again. */
++	check_mini_fo_dentry(dentry);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	if(!hidden_sto_dentry) {
++		/*
++		 * This is the case after creating the first
++		 * hidden_sto_dentry.
++		 * After one negative storage_dentry, all pointers to
++		 * hidden_storage dentries are set to NULL. We need to
++		 * create the negative dentry before we create the storage
++		 * file.
++		 */
++		unsigned int len;
++		const unsigned char *name;
++		len = dtohd(dentry)->d_name.len;
++		name = dtohd(dentry)->d_name.name;
++		hidden_sto_dentry = lookup_one_len(name, dtohd2(dir), len);
++		dtohd2(dentry) = hidden_sto_dentry;
++	}
++
++	/* was:	hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	/* lets be safe */
++	if(dtohd2(dir) != hidden_sto_dir_dentry) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: invalid parameter or meta data corruption [2].\n");
++		return 1;
++	}
++
++	/* check for errors in lock_parent */
++	err = PTR_ERR(hidden_sto_dir_dentry);
++	if(IS_ERR(hidden_sto_dir_dentry)) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: lock_parent failed.\n");
++		return err;
++	}
++
++	err = vfs_mkdir(hidden_sto_dir_dentry->d_inode,
++			hidden_sto_dentry,
++			dir->d_inode->i_mode);
++
++	if(err) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: failed to create storage dir [1].\n");
++		/* was: unlock_dir(dir); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&dir->d_inode->i_mutex);
++#else
++		up(&dir->d_inode->i_sem);
++#endif
++		dput(dir);
++		return err;
++	}
++
++	/* everything ok! */
++	if(!dtohd2(dentry)->d_inode) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: failed to create storage dir [2].\n");
++		/* was: unlock_dir(dir); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&dir->d_inode->i_mutex);
++#else
++		up(&dir->d_inode->i_sem);
++#endif
++		dput(dir);
++		return 1;
++	}
++
++	/* interpose the new inode and set new state */
++	itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++	dtopd(dentry)->state = MODIFIED;
++
++	/* initalize the wol list */
++	itopd(dentry->d_inode)->deleted_list_size = -1;
++	itopd(dentry->d_inode)->renamed_list_size = -1;
++	meta_build_lists(dentry);
++
++	fist_copy_attr_all(dentry->d_inode, itohi2(dentry->d_inode));
++	fist_copy_attr_timesizes(dir->d_inode,
++				 hidden_sto_dir_dentry->d_inode);
++	dir->d_inode->i_nlink++;
++	/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++	return 0;
++}
++
++
++#if 0 /* unused */
++
++/*
++ * Read "len" bytes from "filename" into "buf".
++ * "buf" is in kernel space.
++ */
++int
++mini_fo_read_file(const char *filename, void *buf, int len)
++{
++    file_t *filp;
++    mm_segment_t oldfs;
++    int bytes;
++    /* Chroot? Maybe NULL isn't right here */
++    filp = filp_open(filename, O_RDONLY, 0);
++    if (!filp || IS_ERR(filp)) {
++	printk("mini_fo_read_file err %d\n", (int) PTR_ERR(filp));
++	return -1;  /* or do something else */
++    }
++
++    if (!filp->f_op->read)
++	return -2;  /* file(system) doesn't allow reads */
++
++    /* now read len bytes from offset 0 */
++    filp->f_pos = 0;		/* start offset */
++    oldfs = get_fs();
++    set_fs(KERNEL_DS);
++    bytes = filp->f_op->read(filp, buf, len, &filp->f_pos);
++    set_fs(oldfs);
++
++    /* close the file */
++    fput(filp);
++
++    return bytes;
++}
++
++
++
++/*
++ * Write "len" bytes from "buf" to "filename"
++ * "buf" is in kernel space.
++ */
++int
++mini_fo_write_file(const char *filename, void *buf, int len)
++{
++    file_t *filp;
++    mm_segment_t oldfs;
++    int bytes;
++				/* Chroot? Maybe NULL isn't right here */
++    filp = filp_open(filename, O_RDWR|O_CREAT, 0640);
++    if (!filp || IS_ERR(filp)) {
++	printk("mini_fo_write_file err %d\n", (int) PTR_ERR(filp));
++	return -1;  /* or do something else */
++    }
++
++    if (!filp->f_op->write)
++	return -2;  /* file(system) doesn't allow writes */
++
++    /* now write len bytes from offset 0 */
++    filp->f_pos = 0;		/* start offset */
++    oldfs = get_fs();
++    set_fs(KERNEL_DS);
++    bytes = filp->f_op->write(filp, buf, len, &filp->f_pos);
++    set_fs(oldfs);
++
++    /* close the file */
++    fput(filp);
++
++    return bytes;
++}
++
++#endif /* unused */
++
+--- /dev/null
++++ b/fs/mini_fo/ChangeLog
+@@ -0,0 +1,281 @@
++2006-01-24  Markus Klotzbuecher  <mk@mary.denx.de>
++
++	* Add tons of ugly ifdefs to Ed L. Cashin's mutex patch to
++          retain backwards compatibility.
++
++2006-01-24  Ed L. Cashin <ecashin@coraid.com>
++
++	* Support for the new mutex infrastructure
++	(7892f2f48d165a34b0b8130c8a195dfd807b8cb6)
++
++2005-10-15  Markus Klotzbuecher  <mk@localhost.localdomain>
++
++	* Bugfix for a serious memory leak in mini_fo_follow_link.
++
++2005-09-21  Markus Klotzbuecher  <mk@mary>
++
++	* new release 0.6.1
++
++	* fix of a compiler warning due to changes in 2.6.13
++
++2005-09-21  Klaus Wenninger  <klaus.wenninger@siemens.com>
++
++	* file.c: readdir: fix for a bug that caused directory entries
++          to show up twice when using storage filesystems such as
++          minixfs or pramfs.
++
++2005-06-30  Eric Lammerts <eric@lammerts.org>
++
++	* fix for an oops when overwriting a binary thats beeing
++          executed.
++
++2005-06-09    <mk@mary>
++
++	* Renamed overlay to mini_fo-overlay.
++
++	* Added mini_fo-merge script to allow merging of storage and base
++	after making modifications.
++
++2005-05-22  root  <mk@mary>
++
++	* Added overlay script that allows to easily mount mini_fo ontop
++	of a given base directory
++
++2005-05-10    <mk@mary>
++
++	* inode.c: xattr functions return -EOPNOSUPP instead of
++          -ENOSUPP, what confuses "ls -l"
++
++	* Changed license from LGPL to GPL.
++
++2005-05-08  root  <mk@mary>
++
++	* Makefile: clean it up and added make install and make
++          uninstall.
++
++2005-05-06    <mk@mary>
++
++	* merged devel branch back to main. [v0-6-0-pre3]
++
++	* removed unused files print.c and fist_ioctl. [devel-0-0-18]
++
++	* ioctl: removed fist_ioctl stuff, that is not needed for
++          now.
++
++2005-05-03    <mk@mary>
++
++	* file.c: simplified mini_fo_open and mini_fo_setattr using
++          new state changing functions. [devel-0-0-17]
++
++	* inode.c: Fixed getattr state bug (see below) in 2.4 function
++          mini_fo_inode revalidate.
++
++	* inode.c: found an other bug in mini_fo_getattr. States are not
++	  reliable in this function, as a file can be opened, unlinked and
++	  the getattr function called. This results in a deleted dentry
++	  with an inode. Fix is to ignore states and simply use the inode
++	  available.
++
++2005-04-29    <mk@mary>
++
++	* file.c: Bugfix and cleanup in fasync and fsync. [devel-0-0-16]
++
++	* file.c: do not use mini_fo_lock so the generic version is
++          used (I guess).
++
++	* inode.c: getattr, never call getattr on lower files, as this
++          will cause the inum to change.
++
++	* inode.c: rename_reg_file renamed to rename_nondir, as it
++          doesn't matter as long it't not a dir. Removed all
++          rename_dev_file etc.
++
++	* tagged as devel-0-0-15
++
++	* inode.c: added support for chosing support for extended
++          attrs at compile time by XATTR define in mini_fo.h .
++
++	* inode.c: fixed mini_fo_getattr to use mini_fo inode and not
++          lower again, what avoids inode number changes that confused
++          rm again. This is the proper solution.
++
++2005-04-24    <mk@mary>
++
++	* all files: updated Copyright notive to 2005. [devel-0-0-14]
++
++	* inode.c: fixed mini_fo_getattr to not change the inode
++          number, even if lower files change.
++
++	* super.c: fixed a bug that caused deleted base file to show
++          up suddenly after some time, or after creating a special
++          file. The problem was that after some time or after special
++          file creating sync_sb_inodes is called by the vfs, that
++          called our mini_fo_put_inode. There was (wrongly) called
++          __meta_put_lists, that nuked the lists, although the inode
++          was going to continue its life. Moving __meta_put_lists to
++          mini_fo_clear_inode, where an inode is really destroyed,
++          solved the problem.
++
++
++2005-04-23    <mk@mary>
++
++	* state.c, aux.c: more cleaning up and
++          simplifications. [devel-0-0-13]
++
++	* inode.c: implemented mini_fo_getattr, that was required for
++          2.6 because inode_revalidate has been remove there, and the
++	  old "du" bug returned.
++
++
++2005-04-20    <mk@mary>
++
++	* aux.c: get_neg_sto_dentry(): allow to be called for dentries
++          in state UNMODIFIED, NON_EXISTANT _and_ DELETED.
++
++2005-04-19    <mk@mary>
++
++	* Fixed a bug under 2.6 that caused files deleted via mini_fo
++          not to be deleted properly and therefore the fs filled up
++          untill no memory was left. [devel-0-0-12]
++
++	* Added basic hard link support. This means that creating
++          hardlinks will work, but existing ones will be treated as
++          individual files. [devel-0-0-11]
++
++2005-04-17    <mk@mary>
++
++	* Bugfixes
++
++2005-04-13  root  <mk@mary>
++
++	* Added file state.c for the state transition
++          functions. Doesn't work very well yet, though...
++
++2005-04-12    <mk@mary>
++
++	* Porting to 2.6 started, which is easier than expected, also
++          due to Olivier previous work.
++
++2005-04-08    <mk@mary>
++
++	* Fixed the bug that caused du to return invalid sizes of
++          directory trees. The problem was that
++          mini_fo_inode_revalidate didn't always copy the attributes
++          from the base inode properly.
++
++2005-04-01  Markus Klotzbuecher  <mk@chasey>
++
++	* Merged devel branch back to main trunk and updated the
++          RELEASE notes. This will be 0-6-0-pre1.
++
++2005-03-31  Markus Klotzbuecher  <mk@chasey>
++
++	* Fixed some bugs in rename_reg_file, that only showed up in
++          the kernel compile test. Kernel compiles cleanly ontop of
++          mini_fo, now also make mrproper etc. work. Seems pretty stable.
++
++2005-03-28  Markus Klotzbuecher  <mk@chasey>
++
++	* Many, many directory renaming bugfixes and a lot of other
++          cleanup. Dir renaming seems to work relatively stable.
++
++2005-03-22  Markus Klotzbuecher  <mk@chasey>
++
++	* Finished implementing lightweight directory renaming. Some
++          basic testing indicates it works fine.
++	  Next is to implement testcases for the testsuite and confirm
++          everything is really working ok.
++
++2005-03-18  Markus Klotzbuecher  <mk@chasey>
++
++	* Finished implementing meta.c stuff required for directory
++          renaming.
++
++2005-03-17  Markus Klotzbuecher  <mk@chasey>
++
++	* Fixed all compile warnings + an extremly old bug that
++          somehow crept in while reworking the wol stuff to the META
++          system. Turning on -Werror again... :-)
++
++	* Fixed some bugs in the new rename_reg_file function.
++
++	* Rewrote mini_fo rename and split it into several
++          subfunctions, that handle the different types
++          seperately. Rewrote the regular file function aswell, as it
++          was implemented somewhat inefficient.
++
++2005-03-16  Markus Klotzbuecher  <mk@chasey>
++
++	* Implemented new META subsystem, removed old WOL stuff in favor
++	  if it.
++
++	* After some basic testing everything seems ok...
++
++2005-03-11  Markus Klotzbuecher  <mk@chasey>
++
++	* Renaming a non regular file caused trouble because I always
++	  tried to copy the contents. Now I only do this for regular
++	  files. mini_fo_rename still isn't implemented properly, renaming
++	  of device files, symlinks etc. results in a empty regular file
++	  instead of the proper type.
++
++	* Directory renaming suddenly works! What a surprise! I guess
++          this is because renaming is implemented as making a copy and
++          removing the original. Still this might not work
++          everywhere...
++
++2005-03-09  Markus Klotzbuecher  <mk@chasey>
++
++	* Bugfix, when a mini_fo directory that exists in storage
++  	  (state: MODIFIED, CREATED and DEL_REWRITTEN) is deleted, a
++  	  possibly existing WOL file contained in it needs to be
++  	  deleted too.
++
++	* Starting cleanup: defined state names in order to get rid of
++          the state numbers.
++
++2005-03-08  Markus Klotzbuecher  <mk@chasey>
++
++	* Makefile fix, fist_ioctl was built against wrong sources if ARCH=um
++
++	* Fixed a bug in dentry.c, mini_fo_d_hash. In state 4 =
++          DEL_REWRITTEN the hash was calculated from the base dentry,
++          which was wrong and and caused assertions in
++          __mini_fo_hidden_dentry to fail.
++
++2005-02-21    <mk@mary>
++
++	* Implemented directory deleting (inode.c)
++
++	* main.c: made mini_fo_parse_options a little more robust.
++
++2004-12-22    <mk@mary>
++
++	* Makefile cleanup and uml stuff, removed unneccessary files
++
++	* Created a new and hopefully more informative README
++
++	* CHANGELOG: created a new CHANGELOG and added old entries reversely
++
++
++2004-10-24 Gleb Natapov <gleb@nbase.co.il>
++
++	* Fix: owner and group where not correctly copied from base to
++          storage.
++
++
++2004-10-05 Gleb Natapov <gleb@nbase.co.il>
++
++	* Implementation of fsync, fasync and lock mini_fo functions.
++
++
++2004-09-29 Bob Lee <bob@pantasys.com>
++
++	* Fix of a serious pointer bug
++
++
++2004-09-28 Gleb Natapov <gleb@nbase.co.il>
++
++	* Implementation of mini_fo_mknod and mini_fo_rename, support
++          for device files.
++
+--- /dev/null
++++ b/fs/mini_fo/dentry.c
+@@ -0,0 +1,244 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++
++/*
++ * THIS IS A BOOLEAN FUNCTION: returns 1 if valid, 0 otherwise.
++ */
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_d_revalidate(dentry_t *dentry, struct nameidata *nd)
++#else
++mini_fo_d_revalidate(dentry_t *dentry, int flags)
++#endif
++{
++	int err1 = 1; /* valid = 1, invalid = 0 */
++	int err2 = 1;
++	dentry_t *hidden_dentry;
++	dentry_t *hidden_sto_dentry;
++
++
++	check_mini_fo_dentry(dentry);
++
++	hidden_dentry  = dtohd(dentry);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	if(hidden_dentry &&
++	   hidden_dentry->d_op &&
++	   hidden_dentry->d_op->d_revalidate) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		err1 = hidden_dentry->d_op->d_revalidate(hidden_dentry, nd);
++#else
++		err1 = hidden_dentry->d_op->d_revalidate(hidden_dentry, flags);
++#endif
++	}
++	if(hidden_sto_dentry &&
++	   hidden_sto_dentry->d_op &&
++	   hidden_sto_dentry->d_op->d_revalidate) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		err2 = hidden_sto_dentry->d_op->d_revalidate(hidden_sto_dentry,
++							     nd);
++#else
++		err2 = hidden_sto_dentry->d_op->d_revalidate(hidden_sto_dentry,
++							     flags);
++#endif
++	}
++
++	/* mk: if one of the lower level dentries are valid,
++	 * the mini_fo dentry is too.
++	 */
++	return (err1 || err2);
++}
++
++
++STATIC int
++mini_fo_d_hash(dentry_t *dentry, qstr_t *name)
++{
++	int err = 0;
++	dentry_t *hidden_dentry;
++	dentry_t *hidden_sto_dentry;
++
++	/* hidden_dentry = mini_fo_hidden_dentry(dentry);
++	 * hidden_sto_dentry = mini_fo_hidden_sto_dentry(dentry); */
++
++	/* state 1, 3, 4, 5: build the hash for the storage dentry */
++	if((dtopd(dentry)->state == MODIFIED) ||
++	   (dtopd(dentry)->state == CREATED) ||
++	   (dtopd(dentry)->state == DEL_REWRITTEN) ||
++	   (dtopd(dentry)->state == DELETED)) {
++		hidden_sto_dentry = dtohd2(dentry);
++		if(hidden_sto_dentry &&
++		   hidden_sto_dentry->d_op &&
++		   hidden_sto_dentry->d_op->d_hash) {
++			err = hidden_sto_dentry->d_op->d_hash(hidden_sto_dentry, name);
++		}
++		goto out;
++	}
++	/* state 2: build the hash for the base dentry */
++	if(dtopd(dentry)->state == UNMODIFIED) {
++		hidden_dentry = dtohd(dentry);
++		if(hidden_dentry &&
++		   hidden_dentry->d_op &&
++		   hidden_dentry->d_op->d_hash) {
++			err = hidden_dentry->d_op->d_hash(hidden_dentry, name);
++		}
++		goto out;
++	}
++	/* state 6: build hash for the dentry that exists */
++	if(dtopd(dentry)->state == NON_EXISTANT) {
++		hidden_sto_dentry = dtohd2(dentry);
++		if(hidden_sto_dentry &&
++		   hidden_sto_dentry->d_op &&
++		   hidden_sto_dentry->d_op->d_hash) {
++			err = hidden_sto_dentry->d_op->d_hash(hidden_sto_dentry, name);
++			goto out;
++		}
++		hidden_dentry = dtohd(dentry);
++		if(hidden_dentry &&
++		   hidden_dentry->d_op &&
++		   hidden_dentry->d_op->d_hash) {
++			err = hidden_dentry->d_op->d_hash(hidden_dentry, name);
++			goto out;
++		}
++	}
++
++	printk(KERN_CRIT "mini_fo: d_hash: invalid state detected.\n");
++
++ out:
++	return err;
++}
++
++
++STATIC int
++mini_fo_d_compare(dentry_t *dentry, qstr_t *a, qstr_t *b)
++{
++	int err;
++	dentry_t *hidden_dentry=NULL;
++
++	/* hidden_dentry = mini_fo_hidden_dentry(dentry); */
++	if(dtohd2(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else if(dtohd(dentry))
++		hidden_dentry = dtohd(dentry);
++
++	if (hidden_dentry && hidden_dentry->d_op && hidden_dentry->d_op->d_compare) {
++		err = hidden_dentry->d_op->d_compare(hidden_dentry, a, b);
++	} else {
++		err = ((a->len != b->len) || memcmp(a->name, b->name, b->len));
++	}
++
++	return err;
++}
++
++
++int
++mini_fo_d_delete(dentry_t *dentry)
++{
++	dentry_t *hidden_dentry;
++	dentry_t *hidden_sto_dentry;
++	int err = 0;
++
++	/* this could be a negative dentry, so check first */
++	if (!dtopd(dentry)) {
++		printk(KERN_CRIT "mini_fo_d_delete: negative dentry passed.\n");
++		goto out;
++	}
++	hidden_dentry = dtohd(dentry);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	if(hidden_dentry) {
++		if(hidden_dentry->d_op &&
++		   hidden_dentry->d_op->d_delete) {
++			err = hidden_dentry->d_op->d_delete(hidden_dentry);
++		}
++	}
++	if(hidden_sto_dentry) {
++		if(hidden_sto_dentry->d_op &&
++		   hidden_sto_dentry->d_op->d_delete) {
++			err = hidden_sto_dentry->d_op->d_delete(hidden_sto_dentry);
++		}
++	}
++
++ out:
++	return err;
++}
++
++
++void
++mini_fo_d_release(dentry_t *dentry)
++{
++	dentry_t *hidden_dentry;
++	dentry_t *hidden_sto_dentry;
++
++
++	/* this could be a negative dentry, so check first */
++	if (!dtopd(dentry)) {
++		printk(KERN_CRIT "mini_fo_d_release: no private data.\n");
++		goto out;
++	}
++	hidden_dentry = dtohd(dentry);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	if(hidden_dentry) {
++		/* decrement hidden dentry's counter and free its inode */
++		dput(hidden_dentry);
++	}
++	if(hidden_sto_dentry) {
++                /* decrement hidden dentry's counter and free its inode */
++		dput(hidden_sto_dentry);
++	}
++
++	/* free private data (mini_fo_dentry_info) here */
++	kfree(dtopd(dentry));
++	__dtopd(dentry) = NULL;	/* just to be safe */
++ out:
++	return;
++}
++
++
++/*
++ * we don't really need mini_fo_d_iput, because dentry_iput will call iput() if
++ * mini_fo_d_iput is not defined. We left this implemented for ease of
++ * tracing/debugging.
++ */
++void
++mini_fo_d_iput(dentry_t *dentry, inode_t *inode)
++{
++	iput(inode);
++}
++
++
++struct dentry_operations mini_fo_dops = {
++	d_revalidate:	mini_fo_d_revalidate,
++	d_hash:		mini_fo_d_hash,
++	d_compare:		mini_fo_d_compare,
++	d_release:		mini_fo_d_release,
++	d_delete:		mini_fo_d_delete,
++	d_iput:		mini_fo_d_iput,
++};
+--- /dev/null
++++ b/fs/mini_fo/file.c
+@@ -0,0 +1,713 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++#define ROUND_UP(x) (((x)+sizeof(long)-1) & ~(sizeof(long)-1))
++
++/*******************
++ * File Operations *
++ *******************/
++
++STATIC loff_t
++mini_fo_llseek(file_t *file, loff_t offset, int origin)
++{
++	loff_t err;
++	file_t *hidden_file = NULL;
++
++	if(S_ISDIR(file->f_dentry->d_inode->i_mode)) {
++		/* Check if trying to llseek from a directory */
++		err = -EISDIR;
++		goto out;
++	}
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			hidden_file = ftohf(file);
++		}
++	}
++
++	/* always set hidden position to this one */
++	hidden_file->f_pos = file->f_pos;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	memcpy(&(hidden_file->f_ra),
++	       &(file->f_ra),
++	       sizeof(struct file_ra_state));
++#else
++	if (file->f_reada) { /* update readahead information if needed */
++		hidden_file->f_reada = file->f_reada;
++		hidden_file->f_ramax = file->f_ramax;
++		hidden_file->f_raend = file->f_raend;
++		hidden_file->f_ralen = file->f_ralen;
++		hidden_file->f_rawin = file->f_rawin;
++	}
++#endif
++	if (hidden_file->f_op && hidden_file->f_op->llseek)
++		err = hidden_file->f_op->llseek(hidden_file, offset, origin);
++	else
++		err = generic_file_llseek(hidden_file, offset, origin);
++
++	if (err < 0)
++		goto out;
++
++	if (err != file->f_pos) {
++		file->f_pos = err;
++		// ION maybe this?
++		// 	file->f_pos = hidden_file->f_pos;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++		file->f_reada = 0;
++#endif
++		file->f_version++;
++	}
++
++ out:
++	return err;
++}
++
++
++/* mk: fanout capable */
++STATIC ssize_t
++mini_fo_read(file_t *file, char *buf, size_t count, loff_t *ppos)
++{
++	int err = -EINVAL;
++	file_t *hidden_file = NULL;
++	loff_t pos = *ppos;
++
++	if(S_ISDIR(file->f_dentry->d_inode->i_mode)) {
++		/* Check if trying to read from a directory */
++		/* printk(KERN_CRIT "mini_fo_read: ERROR: trying to read data from a directory.\n"); */
++		err = -EISDIR;
++		goto out;
++	}
++
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			hidden_file = ftohf(file);
++		}
++	}
++
++	if (!hidden_file->f_op || !hidden_file->f_op->read)
++		goto out;
++
++	err = hidden_file->f_op->read(hidden_file, buf, count, &pos);
++	*ppos = pos;
++
++	if (err >= 0) {
++		/* atime should also be updated for reads of size zero or more */
++		fist_copy_attr_atime(file->f_dentry->d_inode,
++				     hidden_file->f_dentry->d_inode);
++	}
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	/*
++	 * MAJOR HACK
++	 * because pread() does not have any way to tell us that it is
++	 * our caller, then we don't know for sure if we have to update
++	 * the file positions.  This hack relies on read() having passed us
++	 * the "real" pointer of its struct file's f_pos field.
++	 */
++	if (ppos == &file->f_pos)
++		hidden_file->f_pos = *ppos = pos;
++	if (hidden_file->f_reada) { /* update readahead information if needed */
++		file->f_reada = hidden_file->f_reada;
++		file->f_ramax = hidden_file->f_ramax;
++		file->f_raend = hidden_file->f_raend;
++		file->f_ralen = hidden_file->f_ralen;
++		file->f_rawin = hidden_file->f_rawin;
++	}
++#else
++	memcpy(&(file->f_ra),&(hidden_file->f_ra),sizeof(struct file_ra_state));
++#endif
++
++ out:
++	return err;
++}
++
++
++/* this mini_fo_write() does not modify data pages! */
++STATIC ssize_t
++mini_fo_write(file_t *file, const char *buf, size_t count, loff_t *ppos)
++{
++	int err = -EINVAL;
++	file_t *hidden_file = NULL;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	loff_t pos = *ppos;
++
++	/* mk: fan out: */
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			/* This is bad! We have no storage file to write to. This
++			 * should never happen because if a file is opened for
++			 * writing, a copy should have been made earlier.
++			 */
++			printk(KERN_CRIT "mini_fo: write : ERROR, no storage file to write.\n");
++			err = -EINVAL;
++			goto out;
++		}
++	}
++
++	inode = file->f_dentry->d_inode;
++	hidden_inode = itohi2(inode);
++	if(!hidden_inode) {
++		printk(KERN_CRIT "mini_fo: write: no sto inode found, not good.\n");
++		goto out;
++	}
++
++	if (!hidden_file->f_op || !hidden_file->f_op->write)
++		goto out;
++
++	/* adjust for append -- seek to the end of the file */
++	if (file->f_flags & O_APPEND)
++		pos = inode->i_size;
++
++	err = hidden_file->f_op->write(hidden_file, buf, count, &pos);
++
++	/*
++	 * copy ctime and mtime from lower layer attributes
++	 * atime is unchanged for both layers
++	 */
++	if (err >= 0)
++		fist_copy_attr_times(inode, hidden_inode);
++
++	*ppos = pos;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	/*
++	 * XXX: MAJOR HACK
++	 *
++	 * because pwrite() does not have any way to tell us that it is
++	 * our caller, then we don't know for sure if we have to update
++	 * the file positions.  This hack relies on write() having passed us
++	 * the "real" pointer of its struct file's f_pos field.
++	 */
++	if (ppos == &file->f_pos)
++		hidden_file->f_pos = *ppos = pos;
++#endif
++	/* update this inode's size */
++	if (pos > inode->i_size)
++		inode->i_size = pos;
++
++ out:
++	return err;
++}
++
++/* Global variable to hold a file_t pointer.
++ * This serves to allow mini_fo_filldir function to know which file is
++ * beeing read, which is required for two reasons:
++ *
++ *   - be able to call wol functions in order to avoid listing deleted
++ *     base files.
++ *   - if we're reading a directory which is in state 1, we need to
++ *     maintain a list (in mini_fo_filldir) of which files allready
++ *     have been copied to userspace,to detect files existing in base
++ *     and storage and not list them twice.
++ */
++filldir_t mini_fo_filldir_orig;
++file_t *mini_fo_filldir_file;
++
++/* mainly copied from fs/readdir.c */
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++mini_fo_filldir(void * __buf, const char * name, int namlen, loff_t offset,
++		  u64 ino, unsigned int d_type)
++#else
++mini_fo_filldir(void * __buf, const char * name, int namlen, loff_t offset,
++		  ino_t ino, unsigned int d_type)
++#endif
++{
++	struct getdents_callback * buf = (struct getdents_callback *) __buf;
++	file_t* file = mini_fo_filldir_file;
++
++	/* In theses states we filter meta files in storage (WOL) */
++	if(file && (dtopd(file->f_dentry)->state == MODIFIED ||
++		    dtopd(file->f_dentry)->state == CREATED ||
++		    dtopd(file->f_dentry)->state == DEL_REWRITTEN)) {
++
++		int tmp = strlen(META_FILENAME);
++		if(tmp  == namlen) {
++			if(!strncmp(name, META_FILENAME, namlen))
++				return 0;
++		}
++	}
++
++	/* check if we are merging the contents of storage and base */
++	if(file && dtopd(file->f_dentry)->state == MODIFIED) {
++		/* check if we are still reading storage contents, if
++		 * yes, we just save the name of the file for duplicate
++		 * checking later. */
++
++		if(!ftopd(file)->rd.sto_done) {
++			/* put file into ndl list */
++			if(ndl_add_entry(&ftopd(file)->rd, name, namlen))
++				printk(KERN_CRIT "mini_fo_filldir: Error adding to ndl.\n");
++		} else {
++			/* check if file has been deleted */
++			if(meta_check_d_entry(file->f_dentry, name, namlen))
++				return 0;
++
++			/* do duplicate checking */
++			if(ndl_check_entry(&ftopd(file)->rd, name, namlen))
++				return 0;
++		}
++	}
++
++	return mini_fo_filldir_orig(buf, name, namlen, offset, ino, d_type);
++}
++
++
++STATIC int
++mini_fo_readdir(file_t *file, void *dirent, filldir_t filldir)
++{
++	int err = 0;/* mk: ??? -ENOTDIR; */
++	file_t *hidden_file = NULL;
++	file_t *hidden_sto_file = NULL;
++	inode_t *inode;
++	struct getdents_callback *buf;
++	int oldcount;
++
++#if defined(FIST_FILTER_NAME) || defined(FIST_FILTER_SCA)
++	struct mini_fo_getdents_callback buf;
++#endif /* FIST_FILTER_NAME || FIST_FILTER_SCA */
++
++	buf = (struct getdents_callback *) dirent;
++	oldcount = buf->count;
++	inode = file->f_dentry->d_inode;
++	mini_fo_filldir_file = file;
++	mini_fo_filldir_orig = filldir;
++
++	ftopd(file)->rd.sto_done = 0;
++	do {
++		if (ftopd(file) != NULL) {
++			if(ftohf2(file)) {
++				hidden_sto_file = ftohf2(file);
++				err = vfs_readdir(hidden_sto_file, mini_fo_filldir, dirent);
++				file->f_pos = hidden_sto_file->f_pos;
++				if (err > 0)
++					fist_copy_attr_atime(inode, hidden_sto_file->f_dentry->d_inode);
++				/* not finshed yet, we'll be called again */
++				if (buf->count != oldcount)
++					break;
++			}
++
++			ftopd(file)->rd.sto_done = 1;
++
++			if(ftohf(file)) {
++				hidden_file = ftohf(file);
++				err = vfs_readdir(hidden_file, mini_fo_filldir, dirent);
++				file->f_pos = hidden_file->f_pos;
++				if (err > 0)
++					fist_copy_attr_atime(inode, hidden_file->f_dentry->d_inode);
++			}
++
++		}
++	} while (0);
++
++	/* mk:
++	 * we need to check if all the directory data has been copied to userspace,
++	 * or if we will be called again by userspace to complete the operation.
++	 */
++	if(buf->count == oldcount) {
++		ndl_put_list(&ftopd(file)->rd);
++	}
++
++	/* unset this, safe */
++	mini_fo_filldir_file = NULL;
++	return err;
++}
++
++
++STATIC unsigned int
++mini_fo_poll(file_t *file, poll_table *wait)
++{
++	unsigned int mask = DEFAULT_POLLMASK;
++	file_t *hidden_file = NULL;
++
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			hidden_file = ftohf(file);
++		}
++	}
++
++	if (!hidden_file->f_op || !hidden_file->f_op->poll)
++		goto out;
++
++	mask = hidden_file->f_op->poll(hidden_file, wait);
++
++ out:
++	return mask;
++}
++
++/* FIST-LITE special version of mmap */
++STATIC int
++mini_fo_mmap(file_t *file, vm_area_t *vma)
++{
++	int err = 0;
++	file_t *hidden_file = NULL;
++
++	/* fanout capability */
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			hidden_file = ftohf(file);
++		}
++	}
++
++	ASSERT(hidden_file != NULL);
++	ASSERT(hidden_file->f_op != NULL);
++	ASSERT(hidden_file->f_op->mmap != NULL);
++
++	vma->vm_file = hidden_file;
++	err = hidden_file->f_op->mmap(hidden_file, vma);
++	get_file(hidden_file); /* make sure it doesn't get freed on us */
++	fput(file);	       /* no need to keep extra ref on ours */
++
++	return err;
++}
++
++
++
++STATIC int
++mini_fo_open(inode_t *inode, file_t *file)
++{
++	int err = 0;
++ 	int hidden_flags;
++	file_t *hidden_file = NULL;
++	dentry_t *hidden_dentry = NULL;
++
++	/* fanout stuff */
++	file_t *hidden_sto_file = NULL;
++	dentry_t *hidden_sto_dentry = NULL;
++
++	__ftopd(file) =
++		kmalloc(sizeof(struct mini_fo_file_info), GFP_KERNEL);
++	if (!ftopd(file)) {
++		err = -ENOMEM;
++		goto out;
++	}
++
++	/* init the readdir_helper structure */
++	INIT_LIST_HEAD(&ftopd(file)->rd.ndl_list);
++	ftopd(file)->rd.ndl_size = 0;
++
++	/* In certain paths this could stay uninitalized and cause trouble */
++	ftohf(file) = NULL;
++	ftohf2(file) = NULL;
++	hidden_flags = file->f_flags;
++
++	/* create storage files? */
++	if(dtost(file->f_dentry) == UNMODIFIED) {
++		if(!IS_WRITE_FLAG(file->f_flags)) {
++			hidden_dentry = dtohd(file->f_dentry);
++			dget(hidden_dentry);
++			/* dentry_open will decrement mnt refcnt if err.
++			 * otherwise fput() will do an mntput() for us upon file close. */
++			mntget(stopd(inode->i_sb)->hidden_mnt);
++			hidden_file = dentry_open(hidden_dentry,
++						  stopd(inode->i_sb)->hidden_mnt,
++						  hidden_flags);
++			if (IS_ERR(hidden_file)) {
++				err = PTR_ERR(hidden_file);
++				dput(hidden_dentry);
++				goto out;
++			}
++			ftohf(file) = hidden_file;	/* link two files */
++			goto out;
++		}
++		else {
++			if(S_ISDIR(file->f_dentry->d_inode->i_mode)) {
++				err = dir_unmod_to_mod(file->f_dentry);
++			} else
++				err = nondir_unmod_to_mod(file->f_dentry, 1);
++
++			if (err) {
++				printk("mini_fo_open: ERROR creating storage file.\n");
++				goto out;
++			}
++		}
++	}
++	hidden_sto_dentry = dtohd2(file->f_dentry);
++	dget(hidden_sto_dentry);
++
++	if(dtopd(file->f_dentry)->state == MODIFIED) {
++		/* Directorys are special, interpose on both lower level files */
++		if(S_ISDIR(itohi(inode)->i_mode)) {
++			/* check for invalid file types of lower level files */
++			if(!(S_ISDIR(itohi(inode)->i_mode) && S_ISDIR(itohi2(inode)->i_mode))) {
++				printk(KERN_CRIT "mini_fo_open: meta data corruption detected.\n");
++				dput(hidden_sto_dentry);
++				err = -EINVAL;
++				goto out;
++			}
++
++			/* lower level directorys are ok, open the base file */
++			hidden_dentry = dtohd(file->f_dentry);
++			dget(hidden_dentry);
++
++			mntget(stopd(inode->i_sb)->hidden_mnt);
++			hidden_file = dentry_open(hidden_dentry,
++						  stopd(inode->i_sb)->hidden_mnt,
++						  hidden_flags);
++			if (IS_ERR(hidden_file)) {
++				err = PTR_ERR(hidden_file);
++				dput(hidden_dentry);
++				dput(hidden_sto_dentry);
++				goto out;
++			}
++			ftohf(file) = hidden_file; /* link the two files */
++		}
++	}
++
++	if(!exists_in_storage(file->f_dentry)) {
++		printk(KERN_CRIT "mini_fo_open: invalid file state detected.\n");
++		err = -EINVAL;
++		dput(hidden_sto_dentry);
++
++		/* If the base file has been opened, we need to close it here */
++		if(ftohf(file)) {
++			if (hidden_file->f_op && hidden_file->f_op->flush)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++				hidden_file->f_op->flush(hidden_file, NULL);
++#else
++				hidden_file->f_op->flush(hidden_file);
++#endif
++			dput(hidden_dentry);
++		}
++		goto out;
++	}
++
++	/* ok, now we can safely open the storage file */
++	mntget(stopd(inode->i_sb)->hidden_mnt2);
++	hidden_sto_file = dentry_open(hidden_sto_dentry,
++				      stopd(inode->i_sb)->hidden_mnt2,
++				      hidden_flags);
++
++	/* dentry_open dputs the dentry if it fails */
++	if (IS_ERR(hidden_sto_file)) {
++		err = PTR_ERR(hidden_sto_file);
++		/* close base file if open */
++		if(ftohf(file)) {
++			if (hidden_file->f_op && hidden_file->f_op->flush)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++				hidden_file->f_op->flush(hidden_file, NULL);
++#else
++				hidden_file->f_op->flush(hidden_file);
++#endif
++			dput(hidden_dentry);
++		}
++		goto out;
++	}
++	ftohf2(file) = hidden_sto_file; /* link storage file */
++
++ out:
++	if (err < 0 && ftopd(file)) {
++		kfree(ftopd(file));
++	}
++	return err;
++}
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++mini_fo_flush(file_t *file, fl_owner_t id)
++#else
++mini_fo_flush(file_t *file)
++#endif
++{
++	int err1 = 0;		/* assume ok (see open.c:close_fp) */
++	int err2 = 0;
++	file_t *hidden_file = NULL;
++
++	check_mini_fo_file(file);
++
++	/* mk: we don't do any state checking here, as its not worth the time.
++	 * Just flush the lower level files if they exist.
++	 */
++	if(ftopd(file) != NULL) {
++		if(ftohf(file) != NULL) {
++			hidden_file = ftohf(file);
++			if (hidden_file->f_op && hidden_file->f_op->flush)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++				err1 = hidden_file->f_op->flush(hidden_file, id);
++#else
++				err1 = hidden_file->f_op->flush(hidden_file);
++#endif
++		}
++		if(ftohf2(file) != NULL) {
++			hidden_file = ftohf2(file);
++			if (hidden_file->f_op && hidden_file->f_op->flush)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++				err2 = hidden_file->f_op->flush(hidden_file, id);
++#else
++				err2 = hidden_file->f_op->flush(hidden_file);
++#endif
++		}
++	}
++	return (err1 | err2);
++}
++
++
++STATIC int
++mini_fo_release(inode_t *inode, file_t *file)
++{
++	int err = 0;
++	file_t *hidden_file = NULL;
++
++	if (ftopd(file) != NULL) {
++		if(ftohf(file)) {
++			hidden_file = ftohf(file);
++			fput(hidden_file);
++		}
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++			fput(hidden_file);
++		}
++		kfree(ftopd(file));
++	}
++	return err;
++}
++
++STATIC int
++mini_fo_fsync(file_t *file, dentry_t *dentry, int datasync)
++{
++	int err1 = 0;
++	int err2 = 0;
++	file_t *hidden_file = NULL;
++	dentry_t *hidden_dentry;
++
++	check_mini_fo_file(file);
++
++	if ((hidden_file = ftohf(file)) != NULL) {
++		hidden_dentry = dtohd(dentry);
++		if (hidden_file->f_op && hidden_file->f_op->fsync) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++			mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++			down(&hidden_dentry->d_inode->i_sem);
++#endif
++			err1 = hidden_file->f_op->fsync(hidden_file, hidden_dentry, datasync);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++			mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++			up(&hidden_dentry->d_inode->i_sem);
++#endif
++		}
++	}
++
++	if ((hidden_file = ftohf2(file)) != NULL) {
++		hidden_dentry = dtohd2(dentry);
++		if (hidden_file->f_op && hidden_file->f_op->fsync) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++			mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++			down(&hidden_dentry->d_inode->i_sem);
++#endif
++			err2 = hidden_file->f_op->fsync(hidden_file, hidden_dentry, datasync);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++			mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++			up(&hidden_dentry->d_inode->i_sem);
++#endif
++		}
++	}
++	else
++		goto err;
++
++err:
++	return (err1 || err2);
++}
++
++
++STATIC int
++mini_fo_fasync(int fd, file_t *file, int flag)
++{
++	int err1 = 0;
++	int err2 = 0;
++
++	file_t *hidden_file = NULL;
++
++	check_mini_fo_file(file);
++
++	if((hidden_file = ftohf(file)) != NULL) {
++		err1 = hidden_file->f_op->fasync(fd, hidden_file, flag);
++	}
++	if((hidden_file = ftohf2(file)) != NULL) {
++		err2 = hidden_file->f_op->fasync(fd, hidden_file, flag);
++	}
++
++	return (err1 || err2);
++}
++
++
++
++struct file_operations mini_fo_dir_fops =
++	{
++		read:	generic_read_dir,
++		write:	mini_fo_write,
++		readdir: mini_fo_readdir,
++		poll:	mini_fo_poll,
++		/* ioctl:	mini_fo_ioctl, */
++		mmap:	mini_fo_mmap,
++		open:	mini_fo_open,
++		flush:	mini_fo_flush,
++		release: mini_fo_release,
++		fsync:	mini_fo_fsync,
++		fasync:	mini_fo_fasync,
++		/* not needed lock:	mini_fo_lock, */
++		/* not needed: readv */
++		/* not needed: writev */
++		/* not implemented: sendpage */
++		/* not implemented: get_unmapped_area */
++	};
++
++struct file_operations mini_fo_main_fops =
++	{
++		llseek:	mini_fo_llseek,
++		read:	mini_fo_read,
++		write:	mini_fo_write,
++		readdir: mini_fo_readdir,
++		poll:	mini_fo_poll,
++		/* ioctl:	mini_fo_ioctl, */
++		mmap:	mini_fo_mmap,
++		open:	mini_fo_open,
++		flush:	mini_fo_flush,
++		release: mini_fo_release,
++		fsync:	mini_fo_fsync,
++		fasync:	mini_fo_fasync,
++		/* not needed: lock:	mini_fo_lock, */
++		/* not needed: readv */
++		/* not needed: writev */
++		/* not implemented: sendpage */
++		/* not implemented: get_unmapped_area */
++	};
+--- /dev/null
++++ b/fs/mini_fo/fist.h
+@@ -0,0 +1,254 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++
++/*
++ *  $Id$
++ */
++
++#ifndef __FIST_H_
++#define __FIST_H_
++
++/*
++ * KERNEL ONLY CODE:
++ */
++#ifdef __KERNEL__
++#include <linux/version.h>
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,33)
++#include <generated/autoconf.h>
++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19)
++#include <linux/autoconf.h>
++#else
++#include <linux/config.h>
++#endif
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++#ifdef CONFIG_MODVERSIONS
++# define MODVERSIONS
++# include <linux/modversions.h>
++#endif /* CONFIG_MODVERSIONS */
++#endif /* KERNEL_VERSION < 2.6.0 */
++#include <linux/sched.h>
++#include <linux/kernel.h>
++#include <linux/mm.h>
++#include <linux/string.h>
++#include <linux/stat.h>
++#include <linux/errno.h>
++#include <linux/wait.h>
++#include <linux/limits.h>
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++#include <linux/locks.h>
++#else
++#include <linux/buffer_head.h>
++#include <linux/pagemap.h>
++#include <linux/namei.h>
++#include <linux/module.h>
++#include <linux/mount.h>
++#include <linux/page-flags.h>
++#include <linux/writeback.h>
++#include <linux/statfs.h>
++#endif
++#include <linux/smp.h>
++#include <linux/smp_lock.h>
++#include <linux/file.h>
++#include <linux/slab.h>
++#include <linux/vmalloc.h>
++#include <linux/poll.h>
++#include <linux/list.h>
++#include <linux/init.h>
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20)
++#include <linux/xattr.h>
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#include <linux/security.h>
++#endif
++
++#include <linux/swap.h>
++
++#include <asm/system.h>
++/* #include <asm/segment.h> */
++#include <asm/mman.h>
++#include <linux/seq_file.h>
++
++/*
++ * MACROS:
++ */
++
++/* those mapped to ATTR_* were copied from linux/fs.h */
++#define FA_MODE		ATTR_MODE
++#define FA_UID		ATTR_UID
++#define FA_GID		ATTR_GID
++#define FA_SIZE		ATTR_SIZE
++#define FA_ATIME	ATTR_ATIME
++#define FA_MTIME	ATTR_MTIME
++#define FA_CTIME	ATTR_CTIME
++#define FA_ATIME_SET	ATTR_ATIME_SET
++#define FA_MTIME_SET	ATTR_MTIME_SET
++#define FA_FORCE	ATTR_FORCE
++#define FA_ATTR_FLAGS	ATTR_ATTR_FLAG
++
++/* must be greater than all other ATTR_* flags! */
++#define FA_NLINK	2048
++#define FA_BLKSIZE	4096
++#define FA_BLOCKS	8192
++#define FA_TIMES	(FA_ATIME|FA_MTIME|FA_CTIME)
++#define FA_ALL		0
++
++/* macros to manage changes between kernels */
++#define INODE_DATA(i)	(&(i)->i_data)
++
++#define MIN(x,y) ((x < y) ? (x) : (y))
++#define MAX(x,y) ((x > y) ? (x) : (y))
++#define MAXPATHLEN PATH_MAX
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,5)
++# define lookup_one_len(a,b,c) lookup_one(a,b)
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,4,5) */
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,8)
++# define generic_file_llseek default_llseek
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,4,8) */
++
++#ifndef SEEK_SET
++# define SEEK_SET 0
++#endif /* not SEEK_SET */
++
++#ifndef SEEK_CUR
++# define SEEK_CUR 1
++#endif /* not SEEK_CUR */
++
++#ifndef SEEK_END
++# define SEEK_END 2
++#endif /* not SEEK_END */
++
++#ifndef DEFAULT_POLLMASK
++# define DEFAULT_POLLMASK (POLLIN | POLLOUT | POLLRDNORM | POLLWRNORM)
++#endif /* not DEFAULT_POLLMASK */
++
++/* XXX: fix this so fistgen generates kfree() code directly */
++#define kfree_s(a,b) kfree(a)
++
++/*
++ * TYPEDEFS:
++ */
++typedef struct dentry dentry_t;
++typedef struct file file_t;
++typedef struct inode inode_t;
++typedef inode_t vnode_t;
++typedef struct page page_t;
++typedef struct qstr qstr_t;
++typedef struct super_block super_block_t;
++typedef super_block_t vfs_t;
++typedef struct vm_area_struct vm_area_t;
++
++
++/*
++ * EXTERNALS:
++ */
++
++#define FPPF(str,page) printk("PPF %s 0x%x/%d: Lck:%d Err:%d Ref:%d Upd:%d Other::%d:%d:%d:%d:\n", \
++		str, \
++		(int) page, \
++		(int) page->index, \
++		(PageLocked(page) ? 1 : 0), \
++		(PageError(page) ? 1 : 0), \
++		(PageReferenced(page) ? 1 : 0), \
++		(Page_Uptodate(page) ? 1 : 0), \
++		(PageDecrAfter(page) ? 1 : 0), \
++		(PageSlab(page) ? 1 : 0), \
++		(PageSwapCache(page) ? 1 : 0), \
++		(PageReserved(page) ? 1 : 0) \
++		)
++#define EZKDBG printk("EZK %s:%d:%s\n",__FILE__,__LINE__,__FUNCTION__)
++#if 0
++# define EZKDBG1 printk("EZK %s:%d\n",__FILE__,__LINE__)
++#else
++# define EZKDBG1
++#endif
++
++extern int fist_get_debug_value(void);
++extern int fist_set_debug_value(int val);
++#if 0 /* mini_fo doesn't need these */
++extern void fist_dprint_internal(int level, char *str,...);
++extern void fist_print_dentry(char *str, const dentry_t *dentry);
++extern void fist_print_inode(char *str, const inode_t *inode);
++extern void fist_print_file(char *str, const file_t *file);
++extern void fist_print_buffer_flags(char *str, struct buffer_head *buffer);
++extern void fist_print_page_flags(char *str, page_t *page);
++extern void fist_print_page_bytes(char *str, page_t *page);
++extern void fist_print_pte_flags(char *str, const page_t *page);
++extern void fist_checkinode(inode_t *inode, char *msg);
++extern void fist_print_sb(char *str, const super_block_t *sb);
++
++/* §$% by mk: special debug functions */
++extern void fist_mk_print_dentry(char *str, const dentry_t *dentry);
++extern void fist_mk_print_inode(char *str, const inode_t *inode);
++
++extern char *add_indent(void);
++extern char *del_indent(void);
++#endif/* mini_fo doesn't need these */
++
++
++#define STATIC
++#define ASSERT(EX)	\
++do {	\
++    if (!(EX)) {	\
++	printk(KERN_CRIT "ASSERTION FAILED: %s at %s:%d (%s)\n", #EX,	\
++	       __FILE__, __LINE__, __FUNCTION__);	\
++	(*((char *)0))=0;	\
++    }	\
++} while (0)
++/* same ASSERT, but tell me who was the caller of the function */
++#define ASSERT2(EX)	\
++do {	\
++    if (!(EX)) {	\
++	printk(KERN_CRIT "ASSERTION FAILED (caller): %s at %s:%d (%s)\n", #EX,	\
++	       file, line, func);	\
++	(*((char *)0))=0;	\
++    }	\
++} while (0)
++
++#if 0 /* mini_fo doesn't need these */
++#define dprintk(format, args...) printk(KERN_DEBUG format, ##args)
++#define fist_dprint(level, str, args...) fist_dprint_internal(level, KERN_DEBUG str, ## args)
++#define print_entry_location() fist_dprint(4, "%sIN:  %s %s:%d\n", add_indent(), __FUNCTION__, __FILE__, __LINE__)
++#define print_exit_location() fist_dprint(4, "%s OUT: %s %s:%d\n", del_indent(), __FUNCTION__, __FILE__, __LINE__)
++#define print_exit_status(status) fist_dprint(4, "%s OUT: %s %s:%d, STATUS: %d\n", del_indent(), __FUNCTION__, __FILE__, __LINE__, status)
++#define print_exit_pointer(status) \
++do { \
++  if (IS_ERR(status)) \
++    fist_dprint(4, "%s OUT: %s %s:%d, RESULT: %ld\n", del_indent(), __FUNCTION__, __FILE__, __LINE__, PTR_ERR(status)); \
++  else \
++    fist_dprint(4, "%s OUT: %s %s:%d, RESULT: 0x%x\n", del_indent(), __FUNCTION__, __FILE__, __LINE__, PTR_ERR(status)); \
++} while (0)
++#endif/* mini_fo doesn't need these */
++
++#endif /* __KERNEL__ */
++
++
++/*
++ * DEFINITIONS FOR USER AND KERNEL CODE:
++ * (Note: ioctl numbers 1--9 are reserved for fistgen, the rest
++ *  are auto-generated automatically based on the user's .fist file.)
++ */
++# define FIST_IOCTL_GET_DEBUG_VALUE	_IOR(0x15, 1, int)
++# define FIST_IOCTL_SET_DEBUG_VALUE	_IOW(0x15, 2, int)
++
++#endif /* not __FIST_H_ */
+--- /dev/null
++++ b/fs/mini_fo/inode.c
+@@ -0,0 +1,1564 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_create(inode_t *dir, dentry_t *dentry, int mode, struct nameidata *nd)
++#else
++mini_fo_create(inode_t *dir, dentry_t *dentry, int mode)
++#endif
++{
++	int err = 0;
++
++	check_mini_fo_dentry(dentry);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	err = create_sto_reg_file(dentry, mode, nd);
++#else
++	err = create_sto_reg_file(dentry, mode);
++#endif
++	check_mini_fo_dentry(dentry);
++	return err;
++}
++
++
++STATIC dentry_t *
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_lookup(inode_t *dir, dentry_t *dentry, struct nameidata* nd)
++#else
++mini_fo_lookup(inode_t *dir, dentry_t *dentry)
++#endif
++{
++	int err = 0;
++	dentry_t *hidden_dir_dentry;
++	dentry_t *hidden_dentry = NULL;
++
++	dentry_t *hidden_sto_dir_dentry;
++	dentry_t *hidden_sto_dentry = NULL;
++
++	/* whiteout flag */
++	int del_flag = 0;
++	char *bpath = NULL;
++
++	const char *name;
++	unsigned int namelen;
++
++	/* Don't allow lookups of META-files */
++	namelen = strlen(META_FILENAME);
++	if(namelen == dentry->d_name.len) {
++		if(!strncmp(dentry->d_name.name, META_FILENAME, namelen)) {
++			err = -ENOENT;
++			goto out;
++		}
++	}
++
++	hidden_dir_dentry = dtohd(dentry->d_parent);
++	hidden_sto_dir_dentry = dtohd2(dentry->d_parent);
++
++	name = dentry->d_name.name;
++	namelen = dentry->d_name.len;
++
++	/* must initialize dentry operations */
++	dentry->d_op = &mini_fo_dops;
++
++	/* setup the del_flag */
++	del_flag = __meta_check_d_entry(dir, name, namelen);
++	bpath = __meta_check_r_entry(dir, name, namelen);
++
++	/* perform the lookups of base and storage files:
++	 *
++	 * This caused some serious trouble, as a lookup_one_len passing
++	 * a negative dentry oopses. Solution is to only do the lookup
++	 * if the dentry is positive, else we set it to NULL
++	 * More trouble, who said a *_dir_dentry can't be NULL?
++	 */
++	if(bpath) {
++		/* Cross-Interposing (C), yeah! */
++		hidden_dentry = bpath_walk(dir->i_sb, bpath);
++		if(!hidden_dentry || !hidden_dentry->d_inode) {
++			printk(KERN_CRIT "mini_fo_lookup: bpath_walk failed.\n");
++			err= -EINVAL;
++			goto out;
++		}
++
++		/* this can be set up safely without fear of spaghetti
++		 * interposing as it is only used for copying times */
++		hidden_dir_dentry = hidden_dentry->d_parent;
++		kfree(bpath);
++	}
++	else if(hidden_dir_dentry && hidden_dir_dentry->d_inode)
++		hidden_dentry =
++			lookup_one_len(name, hidden_dir_dentry, namelen);
++	else
++		hidden_dentry = NULL;
++
++	if(hidden_sto_dir_dentry && hidden_sto_dir_dentry->d_inode)
++		hidden_sto_dentry =
++			lookup_one_len(name, hidden_sto_dir_dentry, namelen);
++	else
++		hidden_sto_dentry =  NULL;
++
++	/* catch error in lookup */
++	if (IS_ERR(hidden_dentry) || IS_ERR(hidden_sto_dentry)) {
++		/* mk: we need to call dput on the dentry, whose
++		 * lookup_one_len operation failed, in order to avoid
++		 * unmount trouble.
++		 */
++		if(IS_ERR(hidden_dentry)) {
++			printk(KERN_CRIT "mini_fo_lookup: ERR from base dentry, lookup failed.\n");
++			err = PTR_ERR(hidden_dentry);
++		} else {
++			dput(hidden_dentry);
++		}
++		if(IS_ERR(hidden_sto_dentry)) {
++			printk(KERN_CRIT "mini_fo_lookup: ERR from storage dentry, lookup failed.\n");
++			err = PTR_ERR(hidden_sto_dentry);
++		} else {
++			dput(hidden_sto_dentry);
++		}
++		goto out;
++	}
++
++	/* allocate dentry private data */
++	__dtopd(dentry) = (struct mini_fo_dentry_info *)
++		kmalloc(sizeof(struct mini_fo_dentry_info), GFP_KERNEL);
++
++	if (!dtopd(dentry)) {
++		err = -ENOMEM;
++		goto out_dput;
++	}
++
++	/* check for different states of the mini_fo file to be looked up. */
++
++	/* state 1, file has been modified */
++	if(hidden_dentry && hidden_sto_dentry &&
++	   hidden_dentry->d_inode && hidden_sto_dentry->d_inode && !del_flag) {
++
++		/* update parent directory's atime */
++		fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode);
++
++		dtopd(dentry)->state = MODIFIED;
++		dtohd(dentry) = hidden_dentry;
++		dtohd2(dentry) = hidden_sto_dentry;
++
++		err = mini_fo_tri_interpose(hidden_dentry,
++					    hidden_sto_dentry,
++					    dentry, dir->i_sb, 1);
++		if (err) {
++			printk(KERN_CRIT "mini_fo_lookup: error interposing (state1).\n");
++			goto out_free;
++		}
++		goto out;
++	}
++	/* state 2, file is unmodified */
++	if(hidden_dentry && hidden_dentry->d_inode && !del_flag) {
++
++		fist_copy_attr_atime(dir, hidden_dir_dentry->d_inode);
++
++		dtopd(dentry)->state = UNMODIFIED;
++		dtohd(dentry) = hidden_dentry;
++		dtohd2(dentry) = hidden_sto_dentry; /* could be negative */
++
++		err = mini_fo_tri_interpose(hidden_dentry,
++					    hidden_sto_dentry,
++					    dentry, dir->i_sb, 1);
++		if (err) {
++			printk(KERN_CRIT "mini_fo_lookup: error interposing (state2).\n");
++			goto out_free;
++		}
++		goto out;
++	}
++	/* state 3, file has been newly created */
++	if(hidden_sto_dentry && hidden_sto_dentry->d_inode && !del_flag) {
++
++		fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode);
++		dtopd(dentry)->state = CREATED;
++		dtohd(dentry) = hidden_dentry; /* could be negative */
++		dtohd2(dentry) = hidden_sto_dentry;
++
++		err = mini_fo_tri_interpose(hidden_dentry,
++					    hidden_sto_dentry,
++					    dentry, dir->i_sb, 1);
++		if (err) {
++			printk(KERN_CRIT "mini_fo_lookup: error interposing (state3).\n");
++			goto out_free;
++		}
++		goto out;
++	}
++
++	/* state 4, file has deleted and created again. */
++	if(hidden_dentry && hidden_sto_dentry &&
++	   hidden_dentry->d_inode &&
++	   hidden_sto_dentry->d_inode && del_flag) {
++
++		fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode);
++		dtopd(dentry)->state = DEL_REWRITTEN;
++		dtohd(dentry) = NULL;
++		dtohd2(dentry) = hidden_sto_dentry;
++
++		err = mini_fo_tri_interpose(NULL,
++					    hidden_sto_dentry,
++					    dentry, dir->i_sb, 1);
++		if (err) {
++			printk(KERN_CRIT "mini_fo_lookup: error interposing (state4).\n");
++			goto out_free;
++		}
++		/* We will never need this dentry again, as the file has been
++		 * deleted from base */
++		dput(hidden_dentry);
++		goto out;
++	}
++	/* state 5, file has been deleted in base */
++	if(hidden_dentry && hidden_sto_dentry &&
++	   hidden_dentry->d_inode &&
++	   !hidden_sto_dentry->d_inode && del_flag) {
++
++		/* check which parents atime we need for updating */
++		if(hidden_sto_dir_dentry->d_inode)
++			fist_copy_attr_atime(dir,
++					     hidden_sto_dir_dentry->d_inode);
++		else
++			fist_copy_attr_atime(dir,
++					     hidden_dir_dentry->d_inode);
++
++		dtopd(dentry)->state = DELETED;
++		dtohd(dentry) = NULL;
++		dtohd2(dentry) = hidden_sto_dentry;
++
++		/* add negative dentry to dcache to speed up lookups */
++		d_add(dentry, NULL);
++		dput(hidden_dentry);
++		goto out;
++	}
++	/* state 6, file does not exist */
++	if(((hidden_dentry && !hidden_dentry->d_inode) ||
++	    (hidden_sto_dentry && !hidden_sto_dentry->d_inode)) && !del_flag)
++		{
++			/* check which parents atime we need for updating */
++			if(hidden_sto_dir_dentry && hidden_sto_dir_dentry->d_inode)
++				fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode);
++			else
++				fist_copy_attr_atime(dir, hidden_dir_dentry->d_inode);
++
++			dtopd(dentry)->state = NON_EXISTANT;
++			dtohd(dentry) = hidden_dentry;
++			dtohd2(dentry) = hidden_sto_dentry;
++			d_add(dentry, NULL);
++			goto out;
++		}
++
++	/* if we get to here, were in an invalid state. bad. */
++	printk(KERN_CRIT "mini_fo_lookup: ERROR, meta data corruption detected.\n");
++
++	/* end state checking */
++ out_free:
++	d_drop(dentry);		/* so that our bad dentry will get destroyed */
++	kfree(dtopd(dentry));
++	__dtopd(dentry) = NULL;	/* be safe */
++
++ out_dput:
++	if(hidden_dentry)
++		dput(hidden_dentry);
++	if(hidden_sto_dentry)
++		dput(hidden_sto_dentry); /* drops usage count and marks for release */
++
++ out:
++	/* initalize wol if file exists and is directory */
++	if(dentry->d_inode) {
++		if(S_ISDIR(dentry->d_inode->i_mode)) {
++			itopd(dentry->d_inode)->deleted_list_size = -1;
++			itopd(dentry->d_inode)->renamed_list_size = -1;
++			meta_build_lists(dentry);
++		}
++	}
++	return ERR_PTR(err);
++}
++
++
++STATIC int
++mini_fo_link(dentry_t *old_dentry, inode_t *dir, dentry_t *new_dentry)
++{
++	int err;
++	dentry_t *hidden_old_dentry;
++	dentry_t *hidden_new_dentry;
++	dentry_t *hidden_dir_dentry;
++
++
++	check_mini_fo_dentry(old_dentry);
++	check_mini_fo_dentry(new_dentry);
++	check_mini_fo_inode(dir);
++
++	/* no links to directorys and existing targets target allowed */
++	if(S_ISDIR(old_dentry->d_inode->i_mode) ||
++	   is_mini_fo_existant(new_dentry)) {
++		err = -EPERM;
++		goto out;
++	}
++
++	/* bring it directly from unmod to del_rew */
++	if(dtost(old_dentry) == UNMODIFIED) {
++		err = nondir_unmod_to_mod(old_dentry, 1);
++		if(err) {
++			err = -EINVAL;
++			goto out;
++		}
++		err = meta_add_d_entry(old_dentry->d_parent,
++				       old_dentry->d_name.name,
++				       old_dentry->d_name.len);
++		if(err) {
++			err = -EINVAL;
++			goto out;
++		}
++		dput(dtohd(old_dentry));
++		dtohd(old_dentry) = NULL;
++		dtost(old_dentry) = DEL_REWRITTEN;
++	}
++
++	err = get_neg_sto_dentry(new_dentry);
++	if(err) {
++		err = -EINVAL;
++		goto out;
++	}
++
++	hidden_old_dentry = dtohd2(old_dentry);
++	hidden_new_dentry = dtohd2(new_dentry);
++
++	dget(hidden_old_dentry);
++	dget(hidden_new_dentry);
++
++	/* was: hidden_dir_dentry = lock_parent(hidden_new_dentry); */
++	hidden_dir_dentry = dget(hidden_new_dentry->d_parent);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = vfs_link(hidden_old_dentry,
++		       hidden_dir_dentry->d_inode,
++		       hidden_new_dentry);
++	if (err || !hidden_new_dentry->d_inode)
++		goto out_lock;
++
++	dtost(new_dentry) = CREATED;
++ 	err = mini_fo_tri_interpose(NULL, hidden_new_dentry, new_dentry, dir->i_sb, 0);
++	if (err)
++		goto out_lock;
++
++	fist_copy_attr_timesizes(dir, hidden_new_dentry->d_inode);
++	/* propagate number of hard-links */
++	old_dentry->d_inode->i_nlink = itohi2(old_dentry->d_inode)->i_nlink;
++
++ out_lock:
++	/* was: unlock_dir(hidden_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_dir_dentry);
++
++	dput(hidden_new_dentry);
++	dput(hidden_old_dentry);
++	if (!new_dentry->d_inode)
++		d_drop(new_dentry);
++
++ out:
++	return err;
++}
++
++
++STATIC int
++mini_fo_unlink(inode_t *dir, dentry_t *dentry)
++{
++	int err = 0;
++
++	dget(dentry);
++	if(dtopd(dentry)->state == MODIFIED) {
++		err = nondir_mod_to_del(dentry);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == UNMODIFIED) {
++		err = nondir_unmod_to_del(dentry);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == CREATED) {
++		err = nondir_creat_to_del(dentry);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == DEL_REWRITTEN) {
++		err = nondir_del_rew_to_del(dentry);
++		goto out;
++	}
++
++	printk(KERN_CRIT "mini_fo_unlink: ERROR, invalid state detected.\n");
++
++ out:
++	fist_copy_attr_times(dir, itohi2(dentry->d_parent->d_inode));
++
++	if(!err) {
++		/* is this causing my pain? d_delete(dentry); */
++		d_drop(dentry);
++	}
++
++	dput(dentry);
++	return err;
++}
++
++
++STATIC int
++mini_fo_symlink(inode_t *dir, dentry_t *dentry, const char *symname)
++{
++	int err=0;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++        umode_t mode;
++#endif
++
++	/* Fail if the symlink file exists */
++	if(!(dtost(dentry) == DELETED ||
++	     dtost(dentry) == NON_EXISTANT)) {
++		err = -EEXIST;
++		goto out;
++	}
++
++	err = get_neg_sto_dentry(dentry);
++	if(err) {
++		err = -EINVAL;
++		goto out;
++	}
++	hidden_sto_dentry = dtohd2(dentry);
++
++	dget(hidden_sto_dentry);
++	/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	mode = S_IALLUGO;
++	err = vfs_symlink(hidden_sto_dir_dentry->d_inode,
++			  hidden_sto_dentry, symname, mode);
++#else
++	err = vfs_symlink(hidden_sto_dir_dentry->d_inode,
++			  hidden_sto_dentry,
++			  symname);
++#endif
++	if (err || !hidden_sto_dentry->d_inode)
++                goto out_lock;
++
++        if(dtost(dentry) == DELETED) {
++                dtost(dentry) = DEL_REWRITTEN;
++                err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0);
++                if(err)
++                        goto out_lock;
++        } else if(dtost(dentry) == NON_EXISTANT) {
++                dtost(dentry) = CREATED;
++                err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0);
++                if(err)
++                        goto out_lock;
++        }
++	fist_copy_attr_timesizes(dir, hidden_sto_dir_dentry->d_inode);
++
++ out_lock:
++        /* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++
++        dput(hidden_sto_dentry);
++        if (!dentry->d_inode)
++                d_drop(dentry);
++ out:
++        return err;
++}
++
++STATIC int
++mini_fo_mkdir(inode_t *dir, dentry_t *dentry, int mode)
++{
++	int err;
++
++	err = create_sto_dir(dentry, mode);
++
++	check_mini_fo_dentry(dentry);
++
++	return err;
++}
++
++
++STATIC int
++mini_fo_rmdir(inode_t *dir, dentry_t *dentry)
++{
++	int err = 0;
++
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++	dentry_t *meta_dentry;
++	inode_t *hidden_sto_dir = NULL;
++
++	check_mini_fo_dentry(dentry);
++	check_mini_fo_inode(dir);
++
++	dget(dentry);
++	if(dtopd(dentry)->state == MODIFIED) {
++		/* XXX: disabled, because it does not bother to check files on
++		 * the original filesystem - just a hack, but better than simply
++		 * removing it without testing */
++		err = -EINVAL;
++		goto out;
++
++		hidden_sto_dir = itohi2(dir);
++		hidden_sto_dentry = dtohd2(dentry);
++
++		/* was:hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++		hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++		/* Delete an old WOL file contained in the storage dir */
++		meta_dentry = lookup_one_len(META_FILENAME,
++					     hidden_sto_dentry,
++					     strlen(META_FILENAME));
++		if(meta_dentry->d_inode) {
++			err = vfs_unlink(hidden_sto_dentry->d_inode, meta_dentry);
++			dput(meta_dentry);
++			if(!err)
++				d_delete(meta_dentry);
++		}
++
++		err = vfs_rmdir(hidden_sto_dir, hidden_sto_dentry);
++		dput(hidden_sto_dentry);
++		if(!err)
++			d_delete(hidden_sto_dentry);
++
++		/* propagate number of hard-links */
++		dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++
++		dput(dtohd(dentry));
++
++		dtohd(dentry) = NULL;
++		dtopd(dentry)->state = DELETED;
++
++		/* carefull with R files */
++		if( __meta_is_r_entry(dir,
++				      dentry->d_name.name,
++				      dentry->d_name.len) == 1) {
++			err = meta_remove_r_entry(dentry->d_parent,
++						  dentry->d_name.name,
++						  dentry->d_name.len);
++			if(err) {
++				printk(KERN_CRIT "mini_fo: rmdir: meta_remove_r_entry failed.\n");
++				goto out;
++			}
++		}
++		else {
++			/* ok, add deleted file to META */
++			meta_add_d_entry(dentry->d_parent,
++					 dentry->d_name.name,
++					 dentry->d_name.len);
++		}
++		/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++		dput(hidden_sto_dir_dentry);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == UNMODIFIED) {
++		/* XXX: simply adding it to the delete list here is fscking dangerous!
++		 * as a temporary hack, i will disable rmdir on unmodified directories
++		 * for now.
++		 */
++		err = -EINVAL;
++		goto out;
++
++		err = get_neg_sto_dentry(dentry);
++		if(err) {
++			err = -EINVAL;
++			goto out;
++		}
++
++		/* dput base dentry, this will relase the inode and free the
++		 * dentry, as we will never need it again. */
++		dput(dtohd(dentry));
++		dtohd(dentry) = NULL;
++		dtopd(dentry)->state = DELETED;
++
++		/* add deleted file to META-file */
++		meta_add_d_entry(dentry->d_parent,
++				 dentry->d_name.name,
++				 dentry->d_name.len);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == CREATED) {
++		hidden_sto_dir = itohi2(dir);
++		hidden_sto_dentry = dtohd2(dentry);
++
++		/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry);*/
++		hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++		/* Delete an old WOL file contained in the storage dir */
++		meta_dentry = lookup_one_len(META_FILENAME,
++					     hidden_sto_dentry,
++					     strlen(META_FILENAME));
++		if(meta_dentry->d_inode) {
++			/* is this necessary? dget(meta_dentry); */
++			err = vfs_unlink(hidden_sto_dentry->d_inode,
++					 meta_dentry);
++			dput(meta_dentry);
++			if(!err)
++				d_delete(meta_dentry);
++		}
++
++		err = vfs_rmdir(hidden_sto_dir, hidden_sto_dentry);
++		dput(hidden_sto_dentry);
++		if(!err)
++			d_delete(hidden_sto_dentry);
++
++		/* propagate number of hard-links */
++		dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++		dtopd(dentry)->state = NON_EXISTANT;
++
++		/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++		dput(hidden_sto_dir_dentry);
++
++		goto out;
++	}
++	else if(dtopd(dentry)->state == DEL_REWRITTEN) {
++		hidden_sto_dir = itohi2(dir);
++		hidden_sto_dentry = dtohd2(dentry);
++
++		/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry);*/
++		hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++		/* Delete an old WOL file contained in the storage dir */
++		meta_dentry = lookup_one_len(META_FILENAME,
++					     hidden_sto_dentry,
++					     strlen(META_FILENAME));
++		if(meta_dentry->d_inode) {
++			/* is this necessary? dget(meta_dentry); */
++			err = vfs_unlink(hidden_sto_dentry->d_inode,
++					 meta_dentry);
++			dput(meta_dentry);
++			if(!err)
++				d_delete(meta_dentry);
++		}
++
++		err = vfs_rmdir(hidden_sto_dir, hidden_sto_dentry);
++		dput(hidden_sto_dentry);
++		if(!err)
++			d_delete(hidden_sto_dentry);
++
++		/* propagate number of hard-links */
++		dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++		dtopd(dentry)->state = DELETED;
++		/* was: unlock_dir(hidden_sto_dir_dentry); */
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++		dput(hidden_sto_dir_dentry);
++		goto out;
++	}
++
++	printk(KERN_CRIT "mini_fo_rmdir: ERROR, invalid state detected.\n");
++
++ out:
++	if(!err) {
++		d_drop(dentry);
++	}
++
++	fist_copy_attr_times(dir, itohi2(dentry->d_parent->d_inode));
++	dput(dentry);
++
++	return err;
++}
++
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_mknod(inode_t *dir, dentry_t *dentry, int mode, dev_t dev)
++#else
++mini_fo_mknod(inode_t *dir, dentry_t *dentry, int mode, int dev)
++#endif
++{
++	int err = 0;
++
++	check_mini_fo_dentry(dentry);
++
++	err = create_sto_nod(dentry, mode, dev);
++	if(err) {
++		printk(KERN_CRIT "mini_fo_mknod: creating sto nod failed.\n");
++		err = -EINVAL;
++	}
++
++	check_mini_fo_dentry(dentry);
++	return err;
++}
++
++
++STATIC int
++mini_fo_rename(inode_t *old_dir, dentry_t *old_dentry,
++	       inode_t *new_dir, dentry_t *new_dentry)
++{
++	/* dispatch */
++	if(S_ISDIR(old_dentry->d_inode->i_mode))
++		return rename_directory(old_dir, old_dentry, new_dir, new_dentry);
++	return rename_nondir(old_dir, old_dentry, new_dir, new_dentry);
++
++}
++
++int rename_directory(inode_t *old_dir, dentry_t *old_dentry,
++		     inode_t *new_dir, dentry_t *new_dentry)
++{
++	int err, bpath_len;
++	char *bpath;
++
++	dentry_t *hidden_old_dentry;
++	dentry_t *hidden_new_dentry;
++	dentry_t *hidden_old_dir_dentry;
++	dentry_t *hidden_new_dir_dentry;
++
++	err = 0;
++	bpath = NULL;
++	bpath_len = 0;
++
++	/* this is a test, chuck out if it works */
++	if(!(dtopd(new_dentry)->state == DELETED ||
++	     dtopd(new_dentry)->state == NON_EXISTANT)) {
++		printk(KERN_CRIT "mini_fo: rename_directory: \
++                                  uh, ah, new_dentry not negative.\n");
++		/* return -1; */
++	}
++
++	/* state = UNMODIFIED */
++	if(dtopd(old_dentry)->state == UNMODIFIED) {
++		err = dir_unmod_to_mod(old_dentry);
++		if (err)
++			goto out;
++	}
++
++	/* state = MODIFIED */
++	if(dtopd(old_dentry)->state == MODIFIED) {
++		bpath = meta_check_r_entry(old_dentry->d_parent,
++					   old_dentry->d_name.name,
++					   old_dentry->d_name.len);
++		if(bpath) {
++			err = meta_remove_r_entry(old_dentry->d_parent,
++						  old_dentry->d_name.name,
++						  old_dentry->d_name.len);
++			if(err) {
++				printk(KERN_CRIT "mini_fo: rename_directory:\
++                                                   meta_remove_r_entry \
++                                                  failed.\n");
++				goto out;
++			}
++			err = meta_add_r_entry(new_dentry->d_parent,
++					       bpath,
++					       strlen(bpath),
++					       new_dentry->d_name.name,
++					       new_dentry->d_name.len);
++			kfree(bpath);
++		}
++		else {/* wol it */
++			err = meta_add_d_entry(old_dentry->d_parent,
++					       old_dentry->d_name.name,
++					       old_dentry->d_name.len);
++			if (err)
++				goto out;
++			/* put it on rename list */
++			err = get_mini_fo_bpath(old_dentry,
++						&bpath,
++						&bpath_len);
++			if (err)
++				goto out;
++			err = meta_add_r_entry(new_dentry->d_parent,
++					       bpath, bpath_len,
++					       new_dentry->d_name.name,
++					       new_dentry->d_name.len);
++			if (err)
++				goto out;
++		}
++		/* no state change, MODIFIED stays MODIFIED */
++	}
++	/* state = CREATED */
++	if(dtopd(old_dentry)->state == CREATED ||
++	   dtopd(old_dentry)->state == DEL_REWRITTEN) {
++		if(dtohd(old_dentry))
++			dput(dtohd(old_dentry));
++
++		if(dtopd(new_dentry)->state == DELETED) {
++			dtopd(old_dentry)->state = DEL_REWRITTEN;
++			dtohd(old_dentry) = NULL;
++		}
++		else if(dtopd(new_dentry)->state == NON_EXISTANT) {
++			dtopd(old_dentry)->state = CREATED;
++			/* steal new dentry's neg. base dentry */
++			dtohd(old_dentry) = dtohd(new_dentry);
++			dtohd(new_dentry) = NULL;
++		}
++	}
++	if(dtopd(new_dentry)->state == UNMODIFIED ||
++	   dtopd(new_dentry)->state == NON_EXISTANT) {
++		err = get_neg_sto_dentry(new_dentry);
++		if(err)
++			goto out;
++	}
++
++	/* now move sto file */
++	hidden_old_dentry = dtohd2(old_dentry);
++	hidden_new_dentry = dtohd2(new_dentry);
++
++	dget(hidden_old_dentry);
++	dget(hidden_new_dentry);
++
++	hidden_old_dir_dentry = dget(hidden_old_dentry->d_parent);
++	hidden_new_dir_dentry = dget(hidden_new_dentry->d_parent);
++	double_lock(hidden_old_dir_dentry, hidden_new_dir_dentry);
++
++	err = vfs_rename(hidden_old_dir_dentry->d_inode, hidden_old_dentry,
++			 hidden_new_dir_dentry->d_inode, hidden_new_dentry);
++	if(err)
++		goto out_lock;
++
++	fist_copy_attr_all(new_dir, hidden_new_dir_dentry->d_inode);
++	if (new_dir != old_dir)
++		fist_copy_attr_all(old_dir,
++				   hidden_old_dir_dentry->d_inode);
++
++ out_lock:
++	/* double_unlock will dput the new/old parent dentries
++	 * whose refcnts were incremented via get_parent above. */
++	double_unlock(hidden_old_dir_dentry, hidden_new_dir_dentry);
++	dput(hidden_new_dentry);
++	dput(hidden_old_dentry);
++
++ out:
++	return err;
++}
++
++int rename_nondir(inode_t *old_dir, dentry_t *old_dentry,
++		  inode_t *new_dir, dentry_t *new_dentry)
++{
++	int err=0;
++
++	check_mini_fo_dentry(old_dentry);
++	check_mini_fo_dentry(new_dentry);
++	check_mini_fo_inode(old_dir);
++	check_mini_fo_inode(new_dir);
++
++	/* state: UNMODIFIED */
++	if(dtost(old_dentry) == UNMODIFIED) {
++		err = nondir_unmod_to_mod(old_dentry, 1);
++		if(err) {
++			err = -EINVAL;
++			goto out;
++		}
++	}
++
++	/* the easy states */
++	if(exists_in_storage(old_dentry)) {
++
++		dentry_t *hidden_old_dentry;
++		dentry_t *hidden_new_dentry;
++		dentry_t *hidden_old_dir_dentry;
++		dentry_t *hidden_new_dir_dentry;
++
++		/* if old file is MODIFIED, add it to the deleted_list */
++		if(dtopd(old_dentry)->state == MODIFIED) {
++			meta_add_d_entry(old_dentry->d_parent,
++					 old_dentry->d_name.name,
++					 old_dentry->d_name.len);
++
++			dput(dtohd(old_dentry));
++		}
++		/* if old file is CREATED, we only release the base dentry */
++		if(dtopd(old_dentry)->state == CREATED) {
++			if(dtohd(old_dentry))
++				dput(dtohd(old_dentry));
++		}
++
++		/* now setup the new states (depends on new_dentry state) */
++		/* new dentry state =  MODIFIED */
++		if(dtopd(new_dentry)->state == MODIFIED) {
++			meta_add_d_entry(new_dentry->d_parent,
++					 new_dentry->d_name.name,
++					 new_dentry->d_name.len);
++
++			/* new dentry will be d_put'ed later by the vfs
++			 * so don't do it here
++			 * dput(dtohd(new_dentry));
++			 */
++			dtohd(old_dentry) = NULL;
++			dtopd(old_dentry)->state = DEL_REWRITTEN;
++		}
++		/* new dentry state =  UNMODIFIED */
++		else if(dtopd(new_dentry)->state == UNMODIFIED) {
++			if(get_neg_sto_dentry(new_dentry))
++				return -EINVAL;
++
++			meta_add_d_entry(new_dentry->d_parent,
++					 new_dentry->d_name.name,
++					 new_dentry->d_name.len);
++
++			/* is this right??? */
++			/*dput(dtohd(new_dentry));*/
++			dtohd(old_dentry) = NULL;
++			dtopd(old_dentry)->state = DEL_REWRITTEN;
++		}
++		/* new dentry state =  CREATED */
++		else if(dtopd(new_dentry)->state == CREATED) {
++			/* we keep the neg. base dentry (if exists) */
++			dtohd(old_dentry) = dtohd(new_dentry);
++			/* ...and set it to Null, or we'll get
++			 * dcache.c:345 if it gets dput twice... */
++			dtohd(new_dentry) = NULL;
++			dtopd(old_dentry)->state = CREATED;
++		}
++		/* new dentry state =  NON_EXISTANT */
++		else if(dtopd(new_dentry)->state == NON_EXISTANT) {
++			if(get_neg_sto_dentry(new_dentry))
++				return -EINVAL;
++
++			/* we keep the neg. base dentry (if exists) */
++			dtohd(old_dentry) = dtohd(new_dentry);
++			/* ...and set it to Null, or we'll get
++			 * Dr. dcache.c:345 if it gets dput twice... */
++			dtohd(new_dentry) = NULL;
++			dtopd(old_dentry)->state = CREATED;
++		}
++		/* new dentry state =  DEL_REWRITTEN or DELETED */
++		else if(dtopd(new_dentry)->state == DEL_REWRITTEN ||
++			dtopd(new_dentry)->state == DELETED) {
++			dtohd(old_dentry) = NULL;
++			dtopd(old_dentry)->state = DEL_REWRITTEN;
++		}
++		else { /* not possible, uhh, ahh */
++			printk(KERN_CRIT
++			       "mini_fo: rename_reg_file: invalid state detected [1].\n");
++			return -1;
++		}
++
++		/* now we definitely have a sto file */
++		hidden_old_dentry = dtohd2(old_dentry);
++		hidden_new_dentry = dtohd2(new_dentry);
++
++		dget(hidden_old_dentry);
++		dget(hidden_new_dentry);
++
++		hidden_old_dir_dentry = dget(hidden_old_dentry->d_parent);
++		hidden_new_dir_dentry = dget(hidden_new_dentry->d_parent);
++		double_lock(hidden_old_dir_dentry, hidden_new_dir_dentry);
++
++		err = vfs_rename(hidden_old_dir_dentry->d_inode,
++				 hidden_old_dentry,
++				 hidden_new_dir_dentry->d_inode,
++				 hidden_new_dentry);
++		if(err)
++			goto out_lock;
++
++		fist_copy_attr_all(new_dir, hidden_new_dir_dentry->d_inode);
++		if (new_dir != old_dir)
++			fist_copy_attr_all(old_dir, hidden_old_dir_dentry->d_inode);
++
++	out_lock:
++		/* double_unlock will dput the new/old parent dentries
++		 * whose refcnts were incremented via get_parent above.
++		 */
++		double_unlock(hidden_old_dir_dentry, hidden_new_dir_dentry);
++		dput(hidden_new_dentry);
++		dput(hidden_old_dentry);
++	out:
++		return err;
++	}
++	else { /* invalid state */
++		printk(KERN_CRIT "mini_fo: rename_reg_file: ERROR: invalid state detected [2].\n");
++		return -1;
++	}
++}
++
++
++STATIC int
++mini_fo_readlink(dentry_t *dentry, char *buf, int bufsiz)
++{
++	int err=0;
++	dentry_t *hidden_dentry = NULL;
++
++	if(dtohd2(dentry) && dtohd2(dentry)->d_inode) {
++		hidden_dentry = dtohd2(dentry);
++	} else if(dtohd(dentry) && dtohd(dentry)->d_inode) {
++		hidden_dentry = dtohd(dentry);
++	} else {
++		goto out;
++	}
++
++	if (!hidden_dentry->d_inode->i_op ||
++	    !hidden_dentry->d_inode->i_op->readlink) {
++		err = -EINVAL;		goto out;
++	}
++
++	err = hidden_dentry->d_inode->i_op->readlink(hidden_dentry,
++						     buf,
++						     bufsiz);
++	if (err > 0)
++		fist_copy_attr_atime(dentry->d_inode, hidden_dentry->d_inode);
++
++ out:
++	return err;
++}
++
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
++static int mini_fo_follow_link(dentry_t *dentry, struct nameidata *nd)
++#else
++static void* mini_fo_follow_link(dentry_t *dentry, struct nameidata *nd)
++#endif
++{
++	char *buf;
++	int len = PAGE_SIZE, err;
++	mm_segment_t old_fs;
++
++	/* in 2.6 this is freed by mini_fo_put_link called by __do_follow_link */
++	buf = kmalloc(len, GFP_KERNEL);
++	if (!buf) {
++		err = -ENOMEM;
++		goto out;
++	}
++
++	/* read the symlink, and then we will follow it */
++	old_fs = get_fs();
++	set_fs(KERNEL_DS);
++	err = dentry->d_inode->i_op->readlink(dentry, buf, len);
++	set_fs(old_fs);
++	if (err < 0) {
++		kfree(buf);
++		buf = NULL;
++		goto out;
++	}
++	buf[err] = 0;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++        nd_set_link(nd, buf);
++        err = 0;
++#else
++	err = vfs_follow_link(nd, buf);
++#endif
++
++ out:
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	kfree(buf);
++#endif
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
++        return err;
++#else
++        return ERR_PTR(err);
++#endif
++}
++
++STATIC
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
++void mini_fo_put_link(struct dentry *dentry, struct nameidata *nd)
++#else
++void mini_fo_put_link(struct dentry *dentry, struct nameidata *nd, void *cookie)
++#endif
++{
++        char *link;
++        link = nd_get_link(nd);
++        kfree(link);
++}
++#endif
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_permission(inode_t *inode, int mask, struct nameidata *nd)
++#else
++mini_fo_permission(inode_t *inode, int mask)
++#endif
++{
++	inode_t *hidden_inode;
++	int mode;
++	int err;
++
++	if(itohi2(inode)) {
++		hidden_inode = itohi2(inode);
++	} else {
++		hidden_inode = itohi(inode);
++	}
++	mode = inode->i_mode;
++
++	/* not really needed, as permission handles everything:
++	 *	err = vfs_permission(inode, mask);
++	 *	if (err)
++	 *		goto out;
++	 */
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	err = permission(hidden_inode, mask, nd);
++#else
++	err = permission(hidden_inode, mask);
++#endif
++
++	/*  out: */
++	return err;
++}
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++STATIC int
++mini_fo_inode_revalidate(dentry_t *dentry)
++{
++	int err = 0;
++	dentry_t *hidden_dentry;
++	inode_t *hidden_inode;
++
++	ASSERT(dentry->d_inode);
++	ASSERT(itopd(dentry->d_inode));
++
++	if(itohi2(dentry->d_inode)) {
++                hidden_dentry = dtohd2(dentry);
++		hidden_inode = hidden_dentry->d_inode;
++	} else if(itohi(dentry->d_inode)) {
++                hidden_dentry = dtohd(dentry);
++		hidden_inode = hidden_dentry->d_inode;
++	} else {
++                printk(KERN_CRIT "mini_fo_inode_revalidate: ERROR, invalid state detected.\n");
++                err = -ENOENT;
++                goto out;
++        }
++	if (hidden_inode && hidden_inode->i_op && hidden_inode->i_op->revalidate){
++		err = hidden_inode->i_op->revalidate(hidden_dentry);
++		if (err)
++			goto out;
++	}
++	fist_copy_attr_all(dentry->d_inode, hidden_inode);
++ out:
++	return err;
++}
++#endif
++
++STATIC int
++mini_fo_setattr(dentry_t *dentry, struct iattr *ia)
++{
++	int err = 0;
++
++	check_mini_fo_dentry(dentry);
++
++	if(!is_mini_fo_existant(dentry)) {
++		printk(KERN_CRIT "mini_fo_setattr: ERROR, invalid state detected [1].\n");
++		goto out;
++	}
++
++	if(dtost(dentry) == UNMODIFIED) {
++		if(!IS_COPY_FLAG(ia->ia_valid))
++			goto out; /* we ignore these changes to base */
++
++		if(S_ISDIR(dentry->d_inode->i_mode)) {
++			err = dir_unmod_to_mod(dentry);
++		} else {
++			/* we copy contents if file is not beeing truncated */
++			if(S_ISREG(dentry->d_inode->i_mode) &&
++			   !(ia->ia_size == 0 && (ia->ia_valid & ATTR_SIZE))) {
++				err = nondir_unmod_to_mod(dentry, 1);
++			} else
++				err = nondir_unmod_to_mod(dentry, 0);
++		}
++		if(err) {
++			err = -EINVAL;
++			printk(KERN_CRIT "mini_fo_setattr: ERROR changing states.\n");
++			goto out;
++		}
++	}
++	if(!exists_in_storage(dentry)) {
++		printk(KERN_CRIT "mini_fo_setattr: ERROR, invalid state detected [2].\n");
++		err = -EINVAL;
++		goto out;
++	}
++	ASSERT(dentry->d_inode);
++	ASSERT(dtohd2(dentry));
++	ASSERT(itopd(dentry->d_inode));
++	ASSERT(itohi2(dentry->d_inode));
++
++	err = notify_change(dtohd2(dentry), ia);
++	fist_copy_attr_all(dentry->d_inode, itohi2(dentry->d_inode));
++ out:
++	return err;
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++STATIC int
++mini_fo_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat)
++{
++	int err = 0;
++        dentry_t *hidden_dentry;
++
++	ASSERT(dentry->d_inode);
++	ASSERT(itopd(dentry->d_inode));
++
++	if(itohi2(dentry->d_inode)) {
++                hidden_dentry = dtohd2(dentry);
++	} else if(itohi(dentry->d_inode)) {
++                hidden_dentry = dtohd(dentry);
++	} else {
++                printk(KERN_CRIT "mini_fo_getattr: ERROR, invalid state detected.\n");
++                err = -ENOENT;
++                goto out;
++        }
++	fist_copy_attr_all(dentry->d_inode, hidden_dentry->d_inode);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	generic_fillattr(dentry->d_inode, stat);
++	if (!stat->blksize) {
++		struct super_block *s = hidden_dentry->d_inode->i_sb;
++		unsigned blocks;
++		blocks = (stat->size+s->s_blocksize-1) >> s->s_blocksize_bits;
++		stat->blocks = (s->s_blocksize / 512) * blocks;
++		stat->blksize = s->s_blocksize;
++	}
++ out:
++        return err;
++}
++#endif
++
++#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20))
++#if 0 /* no xattr_alloc() and xattr_free() */
++/* This is lifted from fs/xattr.c */
++static void *
++xattr_alloc(size_t size, size_t limit)
++{
++	void *ptr;
++
++	if (size > limit)
++		return ERR_PTR(-E2BIG);
++
++	if (!size)	/* size request, no buffer is needed */
++		return NULL;
++	else if (size <= PAGE_SIZE)
++		ptr = kmalloc((unsigned long) size, GFP_KERNEL);
++	else
++		ptr = vmalloc((unsigned long) size);
++	if (!ptr)
++		return ERR_PTR(-ENOMEM);
++	return ptr;
++}
++
++static void
++xattr_free(void *ptr, size_t size)
++{
++	if (!size)	/* size request, no buffer was needed */
++		return;
++	else if (size <= PAGE_SIZE)
++		kfree(ptr);
++	else
++		vfree(ptr);
++}
++#endif /* no xattr_alloc() and xattr_free() */
++
++/* BKL held by caller.
++ * dentry->d_inode->i_sem down
++ */
++STATIC int
++mini_fo_getxattr(struct dentry *dentry, const char *name, void *value, size_t size) {
++	struct dentry *hidden_dentry = NULL;
++	int err = -EOPNOTSUPP;
++	/* Define these anyway so we don't need as much ifdef'ed code. */
++	char *encoded_name = NULL;
++	char *encoded_value = NULL;
++
++	check_mini_fo_dentry(dentry);
++
++	if(exists_in_storage(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else
++		hidden_dentry = dtohd(dentry);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	if (hidden_dentry->d_inode->i_op->getxattr) {
++		encoded_name = (char *)name;
++		encoded_value = (char *)value;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_dentry->d_inode->i_sem);
++#endif
++		/* lock_kernel() already done by caller. */
++		err = hidden_dentry->d_inode->i_op->getxattr(hidden_dentry, encoded_name, encoded_value, size);
++		/* unlock_kernel() will be done by caller. */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_dentry->d_inode->i_sem);
++#endif
++	}
++	return err;
++}
++
++/* BKL held by caller.
++ * dentry->d_inode->i_sem down
++ */
++STATIC int
++#if ((LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,21) \
++     && LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,23)) \
++     || LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
++mini_fo_setxattr(struct dentry *dentry, const char *name,
++		 const void *value, size_t size, int flags)
++#else
++mini_fo_setxattr(struct dentry *dentry, const char *name,
++		 void *value, size_t size, int flags)
++#endif
++
++{
++	struct dentry *hidden_dentry = NULL;
++	int err = -EOPNOTSUPP;
++
++	/* Define these anyway, so we don't have as much ifdef'ed code. */
++	char *encoded_value = NULL;
++	char *encoded_name = NULL;
++
++	check_mini_fo_dentry(dentry);
++
++	if(exists_in_storage(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else
++		hidden_dentry = dtohd(dentry);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	if (hidden_dentry->d_inode->i_op->setxattr) {
++		encoded_name = (char *)name;
++		encoded_value = (char *)value;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_dentry->d_inode->i_sem);
++#endif
++		/* lock_kernel() already done by caller. */
++		err = hidden_dentry->d_inode->i_op->setxattr(hidden_dentry, encoded_name, encoded_value, size, flags);
++		/* unlock_kernel() will be done by caller. */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_dentry->d_inode->i_sem);
++#endif
++	}
++	return err;
++}
++
++/* BKL held by caller.
++ * dentry->d_inode->i_sem down
++ */
++STATIC int
++mini_fo_removexattr(struct dentry *dentry, const char *name) {
++	struct dentry *hidden_dentry = NULL;
++	int err = -EOPNOTSUPP;
++	char *encoded_name;
++
++	check_mini_fo_dentry(dentry);
++
++	if(exists_in_storage(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else
++		hidden_dentry = dtohd(dentry);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	if (hidden_dentry->d_inode->i_op->removexattr) {
++		encoded_name = (char *)name;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_dentry->d_inode->i_sem);
++#endif
++		/* lock_kernel() already done by caller. */
++		err = hidden_dentry->d_inode->i_op->removexattr(hidden_dentry, encoded_name);
++		/* unlock_kernel() will be done by caller. */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_dentry->d_inode->i_sem);
++#endif
++	}
++	return err;
++}
++
++/* BKL held by caller.
++ * dentry->d_inode->i_sem down
++ */
++STATIC int
++mini_fo_listxattr(struct dentry *dentry, char *list, size_t size) {
++	struct dentry *hidden_dentry = NULL;
++	int err = -EOPNOTSUPP;
++	char *encoded_list = NULL;
++
++	check_mini_fo_dentry(dentry);
++
++	if(exists_in_storage(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else
++		hidden_dentry = dtohd(dentry);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	if (hidden_dentry->d_inode->i_op->listxattr) {
++		encoded_list = list;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_dentry->d_inode->i_sem);
++#endif
++		/* lock_kernel() already done by caller. */
++		err = hidden_dentry->d_inode->i_op->listxattr(hidden_dentry, encoded_list, size);
++		/* unlock_kernel() will be done by caller. */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_dentry->d_inode->i_sem);
++#endif
++	}
++	return err;
++}
++# endif /* defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20)) */
++
++struct inode_operations mini_fo_symlink_iops =
++	{
++		readlink:	mini_fo_readlink,
++		follow_link: mini_fo_follow_link,
++		/* mk: permission:	mini_fo_permission, */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++		revalidate:	mini_fo_inode_revalidate,
++#endif
++		setattr:	mini_fo_setattr,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		getattr:	mini_fo_getattr,
++		put_link:       mini_fo_put_link,
++#endif
++
++#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20))
++		setxattr:	mini_fo_setxattr,
++		getxattr:	mini_fo_getxattr,
++		listxattr:	mini_fo_listxattr,
++		removexattr: mini_fo_removexattr
++# endif /* defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20)) */
++	};
++
++struct inode_operations mini_fo_dir_iops =
++	{
++		create:	mini_fo_create,
++		lookup:	mini_fo_lookup,
++		link:	mini_fo_link,
++		unlink:	mini_fo_unlink,
++		symlink:	mini_fo_symlink,
++		mkdir:	mini_fo_mkdir,
++		rmdir:	mini_fo_rmdir,
++		mknod:	mini_fo_mknod,
++		rename:	mini_fo_rename,
++		/* no readlink/follow_link for non-symlinks */
++		// off because we have setattr
++		//    truncate:	mini_fo_truncate,
++		/* mk:permission:	mini_fo_permission, */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++		revalidate:	mini_fo_inode_revalidate,
++#endif
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		getattr:	mini_fo_getattr,
++#endif
++		setattr:	mini_fo_setattr,
++#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20))
++		setxattr:	mini_fo_setxattr,
++		getxattr:	mini_fo_getxattr,
++		listxattr:	mini_fo_listxattr,
++		removexattr: mini_fo_removexattr
++# endif /* XATTR && LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20) */
++	};
++
++struct inode_operations mini_fo_main_iops =
++	{
++		/* permission:	mini_fo_permission, */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++		revalidate:	mini_fo_inode_revalidate,
++#endif
++		setattr:	mini_fo_setattr,
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		getattr:	mini_fo_getattr,
++#endif
++#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20))
++		setxattr:	mini_fo_setxattr,
++		getxattr:	mini_fo_getxattr,
++		listxattr:	mini_fo_listxattr,
++		removexattr:    mini_fo_removexattr
++# endif /* XATTR && LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20) */
++	};
+--- /dev/null
++++ b/fs/mini_fo/main.c
+@@ -0,0 +1,423 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++#include <linux/module.h>
++
++/* This definition must only appear after we include <linux/module.h> */
++#ifndef MODULE_LICENSE
++# define MODULE_LICENSE(bison)
++#endif /* not MODULE_LICENSE */
++
++/*
++ * This is the mini_fo tri interpose function, which extends the
++ * functionality of the regular interpose by interposing a higher
++ * level inode on top of two lower level ones: the base filesystem
++ * inode and the storage filesystem inode.
++ *
++ *  sb we pass is mini_fo's super_block
++ */
++int
++mini_fo_tri_interpose(dentry_t *hidden_dentry,
++		      dentry_t *hidden_sto_dentry,
++		      dentry_t *dentry, super_block_t *sb, int flag)
++{
++	inode_t *hidden_inode = NULL;
++	inode_t *hidden_sto_inode = NULL; /* store corresponding storage inode */
++	int err = 0;
++	inode_t *inode;
++
++	/* Pointer to hidden_sto_inode if exists, else to hidden_inode.
++	 * This is used to copy the attributes of the correct inode. */
++	inode_t *master_inode;
++
++	if(hidden_dentry)
++		hidden_inode = hidden_dentry->d_inode;
++	if(hidden_sto_dentry)
++		hidden_sto_inode = hidden_sto_dentry->d_inode;
++
++	ASSERT(dentry->d_inode == NULL);
++
++	/* mk: One of the inodes associated with the dentrys is likely to
++	 * be NULL, so carefull:
++	 */
++	ASSERT((hidden_inode != NULL) || (hidden_sto_inode != NULL));
++
++	if(hidden_sto_inode)
++		master_inode = hidden_sto_inode;
++	else
++		master_inode = hidden_inode;
++
++	/*
++	 * We allocate our new inode below, by calling iget.
++	 * iget will call our read_inode which will initialize some
++	 * of the new inode's fields
++	 */
++
++	/*
++	 * original: inode = iget(sb, hidden_inode->i_ino);
++	 */
++	inode = iget(sb, iunique(sb, 25));
++	if (!inode) {
++		err = -EACCES;		/* should be impossible??? */
++		goto out;
++	}
++
++	/*
++	 * interpose the inode if not already interposed
++	 *   this is possible if the inode is being reused
++	 * XXX: what happens if we get_empty_inode() but there's another already?
++	 * for now, ASSERT() that this can't happen; fix later.
++	 */
++	if (itohi(inode) != NULL) {
++		printk(KERN_CRIT "mini_fo_tri_interpose: itohi(inode) != NULL.\n");
++	}
++	if (itohi2(inode) != NULL) {
++		printk(KERN_CRIT "mini_fo_tri_interpose: itohi2(inode) != NULL.\n");
++	}
++
++	/* mk: Carefull, igrab can't handle NULL inodes (ok, why should it?), so
++	 * we need to check here:
++	 */
++	if(hidden_inode)
++		itohi(inode) = igrab(hidden_inode);
++	else
++		itohi(inode) = NULL;
++
++	if(hidden_sto_inode)
++		itohi2(inode) = igrab(hidden_sto_inode);
++	else
++		itohi2(inode) = NULL;
++
++
++	/* Use different set of inode ops for symlinks & directories*/
++	if (S_ISLNK(master_inode->i_mode))
++		inode->i_op = &mini_fo_symlink_iops;
++	else if (S_ISDIR(master_inode->i_mode))
++		inode->i_op = &mini_fo_dir_iops;
++
++	/* Use different set of file ops for directories */
++	if (S_ISDIR(master_inode->i_mode))
++		inode->i_fop = &mini_fo_dir_fops;
++
++	/* properly initialize special inodes */
++	if (S_ISBLK(master_inode->i_mode) || S_ISCHR(master_inode->i_mode) ||
++	    S_ISFIFO(master_inode->i_mode) || S_ISSOCK(master_inode->i_mode)) {
++		init_special_inode(inode, master_inode->i_mode, master_inode->i_rdev);
++	}
++
++	/* Fix our inode's address operations to that of the lower inode */
++	if (inode->i_mapping->a_ops != master_inode->i_mapping->a_ops) {
++		inode->i_mapping->a_ops = master_inode->i_mapping->a_ops;
++	}
++
++	/* only (our) lookup wants to do a d_add */
++	if (flag)
++		d_add(dentry, inode);
++	else
++		d_instantiate(dentry, inode);
++
++	ASSERT(dtopd(dentry) != NULL);
++
++	/* all well, copy inode attributes */
++	fist_copy_attr_all(inode, master_inode);
++
++ out:
++	return err;
++}
++
++/* parse mount options "base=" and "sto=" */
++dentry_t *
++mini_fo_parse_options(super_block_t *sb, char *options)
++{
++	dentry_t *hidden_root = ERR_PTR(-EINVAL);
++	dentry_t *hidden_root2 = ERR_PTR(-EINVAL);
++	struct nameidata nd, nd2;
++	char *name, *tmp, *end;
++	int err = 0;
++
++	/* We don't want to go off the end of our arguments later on. */
++	for (end = options; *end; end++);
++
++	while (options < end) {
++		tmp = options;
++		while (*tmp && *tmp != ',')
++			tmp++;
++		*tmp = '\0';
++		if (!strncmp("base=", options, 5)) {
++			name = options + 5;
++			printk(KERN_INFO "mini_fo: using base directory: %s\n", name);
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++			if (path_init(name, LOOKUP_FOLLOW, &nd))
++				err = path_walk(name, &nd);
++#else
++			err = path_lookup(name, LOOKUP_FOLLOW, &nd);
++#endif
++			if (err) {
++				printk(KERN_CRIT "mini_fo: error accessing hidden directory '%s'\n", name);
++				hidden_root = ERR_PTR(err);
++				goto out;
++			}
++			hidden_root = nd.dentry;
++			stopd(sb)->base_dir_dentry = nd.dentry;
++			stopd(sb)->hidden_mnt = nd.mnt;
++
++		} else if(!strncmp("sto=", options, 4)) {
++			/* parse the storage dir */
++			name = options + 4;
++			printk(KERN_INFO "mini_fo: using storage directory: %s\n", name);
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++			if(path_init(name, LOOKUP_FOLLOW, &nd2))
++				err = path_walk(name, &nd2);
++#else
++                        err = path_lookup(name, LOOKUP_FOLLOW, &nd2);
++#endif
++			if(err) {
++				printk(KERN_CRIT "mini_fo: error accessing hidden storage directory '%s'\n", name);
++
++				hidden_root2 = ERR_PTR(err);
++				goto out;
++			}
++			hidden_root2 = nd2.dentry;
++			stopd(sb)->storage_dir_dentry = nd2.dentry;
++			stopd(sb)->hidden_mnt2 = nd2.mnt;
++			stohs2(sb) = hidden_root2->d_sb;
++
++			/* validate storage dir, this is done in
++			 * mini_fo_read_super for the base directory.
++			 */
++			if (IS_ERR(hidden_root2)) {
++				printk(KERN_WARNING "mini_fo_parse_options: storage dentry lookup failed (err = %ld)\n", PTR_ERR(hidden_root2));
++				goto out;
++			}
++			if (!hidden_root2->d_inode) {
++				printk(KERN_WARNING "mini_fo_parse_options: no storage dir to interpose on.\n");
++				goto out;
++			}
++			stohs2(sb) = hidden_root2->d_sb;
++		} else {
++			printk(KERN_WARNING "mini_fo: unrecognized option '%s'\n", options);
++			hidden_root = ERR_PTR(-EINVAL);
++			goto out;
++		}
++		options = tmp + 1;
++	}
++
++ out:
++	if(IS_ERR(hidden_root2))
++		return hidden_root2;
++	return hidden_root;
++}
++
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++static int
++#else
++super_block_t *
++#endif
++mini_fo_read_super(super_block_t *sb, void *raw_data, int silent)
++{
++	dentry_t *hidden_root;
++	int err = 0;
++
++	if (!raw_data) {
++		printk(KERN_WARNING "mini_fo_read_super: missing argument\n");
++		err = -EINVAL;
++		goto out;
++	}
++	/*
++	 * Allocate superblock private data
++	 */
++	__stopd(sb) = kmalloc(sizeof(struct mini_fo_sb_info), GFP_KERNEL);
++	if (!stopd(sb)) {
++		printk(KERN_WARNING "%s: out of memory\n", __FUNCTION__);
++		err = -ENOMEM;
++		goto out;
++	}
++	stohs(sb) = NULL;
++
++	hidden_root = mini_fo_parse_options(sb, raw_data);
++	if (IS_ERR(hidden_root)) {
++		printk(KERN_WARNING "mini_fo_read_super: lookup_dentry failed (err = %ld)\n", PTR_ERR(hidden_root));
++		err = PTR_ERR(hidden_root);
++		goto out_free;
++	}
++	if (!hidden_root->d_inode) {
++		printk(KERN_WARNING "mini_fo_read_super: no directory to interpose on\n");
++		goto out_free;
++	}
++	stohs(sb) = hidden_root->d_sb;
++
++	/*
++	 * Linux 2.4.2-ac3 and beyond has code in
++	 * mm/filemap.c:generic_file_write() that requires sb->s_maxbytes
++	 * to be populated.  If not set, all write()s under that sb will
++	 * return 0.
++	 *
++	 * Linux 2.4.4+ automatically sets s_maxbytes to MAX_NON_LFS;
++	 * the filesystem should override it only if it supports LFS.
++	 */
++	/* non-SCA code is good to go with LFS */
++	sb->s_maxbytes = hidden_root->d_sb->s_maxbytes;
++
++	sb->s_op = &mini_fo_sops;
++	/*
++	 * we can't use d_alloc_root if we want to use
++	 * our own interpose function unchanged,
++	 * so we simply replicate *most* of the code in d_alloc_root here
++	 */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	sb->s_root = d_alloc(NULL, &(const struct qstr) { "/", 1, 0 });
++#else
++	sb->s_root = d_alloc(NULL, &(const struct qstr){hash: 0, name: "/", len : 1});
++#endif
++	if (IS_ERR(sb->s_root)) {
++		printk(KERN_WARNING "mini_fo_read_super: d_alloc failed\n");
++		err = -ENOMEM;
++		goto out_dput;
++	}
++
++	sb->s_root->d_op = &mini_fo_dops;
++	sb->s_root->d_sb = sb;
++	sb->s_root->d_parent = sb->s_root;
++
++	/* link the upper and lower dentries */
++	__dtopd(sb->s_root) = (struct mini_fo_dentry_info *)
++		kmalloc(sizeof(struct mini_fo_dentry_info), GFP_KERNEL);
++	if (!dtopd(sb->s_root)) {
++		err = -ENOMEM;
++		goto out_dput2;
++	}
++	dtopd(sb->s_root)->state = MODIFIED;
++	dtohd(sb->s_root) = hidden_root;
++
++	/* fanout relevant, interpose on storage root dentry too */
++	dtohd2(sb->s_root) = stopd(sb)->storage_dir_dentry;
++
++	/* ...and call tri-interpose to interpose root dir inodes
++	 * if (mini_fo_interpose(hidden_root, sb->s_root, sb, 0))
++	 */
++	if(mini_fo_tri_interpose(hidden_root, dtohd2(sb->s_root), sb->s_root, sb, 0))
++		goto out_dput2;
++
++	/* initalize the wol list */
++	itopd(sb->s_root->d_inode)->deleted_list_size = -1;
++	itopd(sb->s_root->d_inode)->renamed_list_size = -1;
++	meta_build_lists(sb->s_root);
++
++	goto out;
++
++ out_dput2:
++	dput(sb->s_root);
++ out_dput:
++	dput(hidden_root);
++	dput(dtohd2(sb->s_root)); /* release the hidden_sto_dentry too */
++ out_free:
++	kfree(stopd(sb));
++	__stopd(sb) = NULL;
++ out:
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++        return err;
++#else
++        if (err) {
++		return ERR_PTR(err);
++        } else {
++		return sb;
++        }
++#endif
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++static int mini_fo_get_sb(struct file_system_type *fs_type,
++					  int flags, const char *dev_name,
++					  void *raw_data, struct vfsmount *mnt)
++{
++	return get_sb_nodev(fs_type, flags, raw_data, mini_fo_read_super, mnt);
++}
++#else
++static struct super_block *mini_fo_get_sb(struct file_system_type *fs_type,
++					  int flags, const char *dev_name,
++					  void *raw_data)
++{
++	return get_sb_nodev(fs_type, flags, raw_data, mini_fo_read_super);
++}
++#endif
++
++void mini_fo_kill_block_super(struct super_block *sb)
++{
++	generic_shutdown_super(sb);
++	/*
++	 *      XXX: BUG: Halcrow: Things get unstable sometime after this point:
++	 *      lib/rwsem-spinlock.c:127: spin_is_locked on uninitialized
++	 *      fs/fs-writeback.c:402: spin_lock(fs/super.c:a0381828) already
++	 *      locked by fs/fs-writeback.c/402
++	 *
++	 *      Apparently, someone's not releasing a lock on sb_lock...
++	 */
++}
++
++static struct file_system_type mini_fo_fs_type = {
++	.owner          = THIS_MODULE,
++	.name           = "mini_fo",
++	.get_sb         = mini_fo_get_sb,
++	.kill_sb        = mini_fo_kill_block_super,
++	.fs_flags       = 0,
++};
++
++
++#else
++static DECLARE_FSTYPE(mini_fo_fs_type, "mini_fo", mini_fo_read_super, 0);
++#endif
++
++static int __init init_mini_fo_fs(void)
++{
++	printk("Registering mini_fo version $Id$\n");
++	return register_filesystem(&mini_fo_fs_type);
++}
++static void __exit exit_mini_fo_fs(void)
++{
++	printk("Unregistering mini_fo version $Id$\n");
++	unregister_filesystem(&mini_fo_fs_type);
++}
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++EXPORT_NO_SYMBOLS;
++#endif
++
++MODULE_AUTHOR("Erez Zadok <ezk@cs.sunysb.edu>");
++MODULE_DESCRIPTION("FiST-generated mini_fo filesystem");
++MODULE_LICENSE("GPL");
++
++/* MODULE_PARM(fist_debug_var, "i"); */
++/* MODULE_PARM_DESC(fist_debug_var, "Debug level"); */
++
++module_init(init_mini_fo_fs)
++module_exit(exit_mini_fo_fs)
+--- /dev/null
++++ b/fs/mini_fo/Makefile
+@@ -0,0 +1,17 @@
++#
++# Makefile for mini_fo 2.4 and 2.6 Linux kernels
++#
++# Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License
++# as published by the Free Software Foundation; either version
++# 2 of the License, or (at your option) any later version.
++#
++
++obj-$(CONFIG_MINI_FO) := mini_fo.o
++mini_fo-objs   := meta.o dentry.o file.o inode.o main.o super.o state.o aux.o
++
++# dependencies
++${mini_fo-objs}: mini_fo.h fist.h
++
+--- /dev/null
++++ b/fs/mini_fo/meta.c
+@@ -0,0 +1,1000 @@
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif /* HAVE_CONFIG_H */
++#include "fist.h"
++#include "mini_fo.h"
++
++int meta_build_lists(dentry_t *dentry)
++{
++	struct mini_fo_inode_info *inode_info;
++
++	dentry_t *meta_dentry = 0;
++	file_t *meta_file = 0;
++	mm_segment_t old_fs;
++	void *buf;
++
++	int bytes, len;
++	struct vfsmount *meta_mnt;
++	char *entry;
++
++	inode_info = itopd(dentry->d_inode);
++	if(!(inode_info->deleted_list_size == -1 &&
++	     inode_info->renamed_list_size == -1)) {
++		printk(KERN_CRIT "mini_fo: meta_build_lists: \
++                                  Error, list(s) not virgin.\n");
++		return -1;
++	}
++
++	/* init our meta lists */
++	INIT_LIST_HEAD(&inode_info->deleted_list);
++	inode_info->deleted_list_size = 0;
++
++	INIT_LIST_HEAD(&inode_info->renamed_list);
++	inode_info->renamed_list_size = 0;
++
++  	/* might there be a META-file? */
++	if(dtohd2(dentry) && dtohd2(dentry)->d_inode) {
++		meta_dentry = lookup_one_len(META_FILENAME,
++					     dtohd2(dentry),
++					     strlen(META_FILENAME));
++		if(!meta_dentry->d_inode) {
++			dput(meta_dentry);
++			goto out_ok;
++		}
++		/* $%& err, is this correct? */
++		meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++		mntget(meta_mnt);
++
++
++		/* open META-file for reading */
++		meta_file = dentry_open(meta_dentry, meta_mnt, 0x0);
++		if(!meta_file || IS_ERR(meta_file)) {
++			printk(KERN_CRIT "mini_fo: meta_build_lists: \
++                                          ERROR opening META file.\n");
++			goto out_err;
++		}
++
++		/* check if fs supports reading */
++		if(!meta_file->f_op->read) {
++			printk(KERN_CRIT "mini_fo: meta_build_lists: \
++                                          ERROR, fs does not support reading.\n");
++			goto out_err_close;
++		}
++
++		/* allocate a page for transfering the data */
++		buf = (void *) __get_free_page(GFP_KERNEL);
++		if(!buf) {
++			printk(KERN_CRIT "mini_fo: meta_build_lists: \
++                                          ERROR, out of mem.\n");
++			goto out_err_close;
++		}
++		meta_file->f_pos = 0;
++		old_fs = get_fs();
++		set_fs(KERNEL_DS);
++		do {
++			char *c;
++			bytes = meta_file->f_op->read(meta_file, buf, PAGE_SIZE, &meta_file->f_pos);
++			if(bytes == PAGE_SIZE) {
++				/* trim a cut off filename and adjust f_pos to get it next time */
++				for(c = (char*) buf+PAGE_SIZE;
++				    *c != '\n';
++				    c--, bytes--, meta_file->f_pos--);
++			}
++			entry = (char *) buf;
++			while(entry < (char *) buf+bytes) {
++
++				char *old_path;
++				char *dir_name;
++				int old_len, new_len;
++
++				/* len without '\n'*/
++				len = (int) (strchr(entry, '\n') - entry);
++				switch (*entry) {
++				case 'D':
++					/* format: "D filename" */
++					meta_list_add_d_entry(dentry,
++							      entry+2,
++							      len-2);
++					break;
++				case 'R':
++					/* format: "R path/xy/dir newDir" */
++					old_path = entry+2;
++					dir_name = strchr(old_path, ' ') + 1;
++					old_len =  dir_name - old_path - 1;
++					new_len = ((int) entry) + len - ((int ) dir_name);
++					meta_list_add_r_entry(dentry,
++							      old_path,
++							      old_len,
++							      dir_name,
++							      new_len);
++					break;
++				default:
++					/* unknown entry type detected */
++					break;
++				}
++				entry += len+1;
++			}
++
++		} while(meta_file->f_pos < meta_dentry->d_inode->i_size);
++
++		free_page((unsigned long) buf);
++		set_fs(old_fs);
++		fput(meta_file);
++	}
++	goto out_ok;
++
++ out_err_close:
++	fput(meta_file);
++ out_err:
++	mntput(meta_mnt);
++	dput(meta_dentry);
++	return -1;
++ out_ok:
++	return 1; /* check this!!! inode_info->wol_size; */
++}
++
++/* cleanups up all lists and free's the mem by dentry */
++int meta_put_lists(dentry_t *dentry)
++{
++	if(!dentry || !dentry->d_inode) {
++		printk("mini_fo: meta_put_lists: invalid dentry passed.\n");
++		return -1;
++	}
++	return __meta_put_lists(dentry->d_inode);
++}
++
++/* cleanups up all lists and free's the mem by inode */
++int __meta_put_lists(inode_t *inode)
++{
++	int err = 0;
++	if(!inode || !itopd(inode)) {
++		printk("mini_fo: __meta_put_lists: invalid inode passed.\n");
++		return -1;
++	}
++	err = __meta_put_d_list(inode);
++	err |= __meta_put_r_list(inode);
++	return err;
++}
++
++int meta_sync_lists(dentry_t *dentry)
++{
++	int err = 0;
++	if(!dentry || !dentry->d_inode) {
++		printk("mini_fo: meta_sync_lists: \
++                        invalid dentry passed.\n");
++		return -1;
++	}
++	err = meta_sync_d_list(dentry, 0);
++	err |= meta_sync_r_list(dentry, 1);
++	return err;
++}
++
++
++/* remove all D entries from the renamed list and free the mem */
++int __meta_put_d_list(inode_t *inode)
++{
++	struct list_head *tmp;
++        struct deleted_entry *del_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode)) {
++		printk(KERN_CRIT "mini_fo: __meta_put_d_list: \
++                                  invalid inode passed.\n");
++		return -1;
++	}
++	inode_info = itopd(inode);
++
++        /* nuke the DELETED-list */
++        if(inode_info->deleted_list_size <= 0)
++		return 0;
++
++	while(!list_empty(&inode_info->deleted_list)) {
++		tmp = inode_info->deleted_list.next;
++		list_del(tmp);
++		del_entry = list_entry(tmp, struct deleted_entry, list);
++		kfree(del_entry->name);
++		kfree(del_entry);
++	}
++	inode_info->deleted_list_size = 0;
++
++	return 0;
++}
++
++/* remove all R entries from the renamed list and free the mem */
++int __meta_put_r_list(inode_t *inode)
++{
++	struct list_head *tmp;
++	struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode)) {
++		printk(KERN_CRIT "mini_fo: meta_put_r_list: invalid inode.\n");
++		return -1;
++	}
++	inode_info = itopd(inode);
++
++        /* nuke the RENAMED-list */
++        if(inode_info->renamed_list_size <= 0)
++		return 0;
++
++	while(!list_empty(&inode_info->renamed_list)) {
++		tmp = inode_info->renamed_list.next;
++		list_del(tmp);
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		kfree(ren_entry->new_name);
++		kfree(ren_entry->old_name);
++		kfree(ren_entry);
++	}
++	inode_info->renamed_list_size = 0;
++
++	return 0;
++}
++
++int meta_add_d_entry(dentry_t *dentry, const char *name, int len)
++{
++	int err = 0;
++	err = meta_list_add_d_entry(dentry, name, len);
++	err |= meta_write_d_entry(dentry,name,len);
++	return err;
++}
++
++/* add a D entry to the deleted list */
++int meta_list_add_d_entry(dentry_t *dentry, const char *name, int len)
++{
++        struct deleted_entry *del_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_list_add_d_entry: \
++                                  invalid dentry passed.\n");
++		return -1;
++	}
++	inode_info = itopd(dentry->d_inode);
++
++        if(inode_info->deleted_list_size < 0)
++                return -1;
++
++        del_entry = (struct deleted_entry *)
++		kmalloc(sizeof(struct deleted_entry), GFP_KERNEL);
++        del_entry->name = (char*) kmalloc(len, GFP_KERNEL);
++        if(!del_entry || !del_entry->name) {
++                printk(KERN_CRIT "mini_fo: meta_list_add_d_entry: \
++                                  out of mem.\n");
++		kfree(del_entry->name);
++		kfree(del_entry);
++                return -ENOMEM;
++        }
++
++        strncpy(del_entry->name, name, len);
++        del_entry->len = len;
++
++        list_add(&del_entry->list, &inode_info->deleted_list);
++        inode_info->deleted_list_size++;
++        return 0;
++}
++
++int meta_add_r_entry(dentry_t *dentry,
++			  const char *old_name, int old_len,
++			  const char *new_name, int new_len)
++{
++	int err = 0;
++	err = meta_list_add_r_entry(dentry,
++				    old_name, old_len,
++				    new_name, new_len);
++	err |= meta_write_r_entry(dentry,
++				  old_name, old_len,
++				  new_name, new_len);
++	return err;
++}
++
++/* add a R entry to the renamed list */
++int meta_list_add_r_entry(dentry_t *dentry,
++			  const char *old_name, int old_len,
++			  const char *new_name, int new_len)
++{
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_list_add_r_entry: \
++                                  invalid dentry passed.\n");
++		return -1;
++	}
++	inode_info = itopd(dentry->d_inode);
++
++        if(inode_info->renamed_list_size < 0)
++                return -1;
++
++        ren_entry = (struct renamed_entry *)
++		kmalloc(sizeof(struct renamed_entry), GFP_KERNEL);
++        ren_entry->old_name = (char*) kmalloc(old_len, GFP_KERNEL);
++        ren_entry->new_name = (char*) kmalloc(new_len, GFP_KERNEL);
++
++        if(!ren_entry || !ren_entry->old_name || !ren_entry->new_name) {
++                printk(KERN_CRIT "mini_fo: meta_list_add_r_entry: \
++                                  out of mem.\n");
++		kfree(ren_entry->new_name);
++		kfree(ren_entry->old_name);
++		kfree(ren_entry);
++                return -ENOMEM;
++        }
++
++        strncpy(ren_entry->old_name, old_name, old_len);
++        ren_entry->old_len = old_len;
++        strncpy(ren_entry->new_name, new_name, new_len);
++        ren_entry->new_len = new_len;
++
++        list_add(&ren_entry->list, &inode_info->renamed_list);
++        inode_info->renamed_list_size++;
++        return 0;
++}
++
++
++int meta_remove_r_entry(dentry_t *dentry, const char *name, int len)
++{
++	int err = 0;
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT
++		       "mini_fo: meta_remove_r_entry: \
++                        invalid dentry passed.\n");
++		return -1;
++	}
++
++	err = meta_list_remove_r_entry(dentry, name, len);
++	err |= meta_sync_lists(dentry);
++	return err;
++}
++
++int meta_list_remove_r_entry(dentry_t *dentry, const char *name, int len)
++{
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT
++		       "mini_fo: meta_list_remove_r_entry: \
++                        invalid dentry passed.\n");
++		return -1;
++	}
++	return __meta_list_remove_r_entry(dentry->d_inode, name, len);
++}
++
++int __meta_list_remove_r_entry(inode_t *inode, const char *name, int len)
++{
++	struct list_head *tmp;
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode))
++		printk(KERN_CRIT
++		       "mini_fo: __meta_list_remove_r_entry: \
++                        invalid inode passed.\n");
++	inode_info = itopd(inode);
++
++        if(inode_info->renamed_list_size < 0)
++                return -1;
++        if(inode_info->renamed_list_size == 0)
++                return 1;
++
++	list_for_each(tmp, &inode_info->renamed_list) {
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		if(ren_entry->new_len != len)
++			continue;
++
++		if(!strncmp(ren_entry->new_name, name, len)) {
++			list_del(tmp);
++			kfree(ren_entry->new_name);
++			kfree(ren_entry->old_name);
++			kfree(ren_entry);
++			inode_info->renamed_list_size--;
++			return 0;
++		}
++	}
++	return 1;
++}
++
++
++/* append a single D entry to the meta file */
++int meta_write_d_entry(dentry_t *dentry, const char *name, int len)
++{
++	dentry_t *meta_dentry = 0;
++        file_t *meta_file = 0;
++        mm_segment_t old_fs;
++
++        int bytes, err;
++        struct vfsmount *meta_mnt = 0;
++        char *buf;
++
++	err = 0;
++
++	if(itopd(dentry->d_inode)->deleted_list_size < 0) {
++		err = -1;
++		goto out;
++	}
++
++	if(dtopd(dentry)->state == UNMODIFIED) {
++                err = build_sto_structure(dentry->d_parent, dentry);
++                if(err) {
++                        printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                          build_sto_structure failed.\n");
++			goto out;
++                }
++        }
++	meta_dentry = lookup_one_len(META_FILENAME,
++				     dtohd2(dentry), strlen (META_FILENAME));
++
++	/* We need to create a META-file */
++        if(!meta_dentry->d_inode) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry,
++			   S_IRUSR | S_IWUSR,
++			   NULL);
++#else
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry,
++			   S_IRUSR | S_IWUSR);
++#endif
++	}
++        /* open META-file for writing */
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        if(!meta_file || IS_ERR(meta_file)) {
++                printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                  ERROR opening meta file.\n");
++                mntput(meta_mnt); /* $%& is this necessary? */
++                dput(meta_dentry);
++		err = -1;
++                goto out;
++        }
++
++        /* check if fs supports writing */
++        if(!meta_file->f_op->write) {
++                printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                  ERROR, fs does not support writing.\n");
++                goto out_err_close;
++        }
++
++	meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */
++        old_fs = get_fs();
++        set_fs(KERNEL_DS);
++
++	/* size: len for name, 1 for \n and 2 for "D " */
++	buf = (char *) kmalloc(len+3, GFP_KERNEL);
++	if (!buf) {
++		printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                  out of mem.\n");
++		return -ENOMEM;
++	}
++
++	buf[0] = 'D';
++	buf[1] = ' ';
++	strncpy(buf+2, name, len);
++	buf[len+2] = '\n';
++	bytes = meta_file->f_op->write(meta_file, buf, len+3,
++				       &meta_file->f_pos);
++	if(bytes != len+3) {
++		printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                  ERROR writing.\n");
++		err = -1;
++	}
++	kfree(buf);
++	set_fs(old_fs);
++
++ out_err_close:
++	fput(meta_file);
++ out:
++	return err;
++}
++
++/* append a single R entry to the meta file */
++int meta_write_r_entry(dentry_t *dentry,
++		       const char *old_name, int old_len,
++		       const char *new_name, int new_len)
++{
++	dentry_t *meta_dentry = 0;
++        file_t *meta_file = 0;
++        mm_segment_t old_fs;
++
++        int bytes, err, buf_len;
++	struct vfsmount *meta_mnt = 0;
++        char *buf;
++
++
++	err = 0;
++
++	if(itopd(dentry->d_inode)->renamed_list_size < 0) {
++		err = -1;
++		goto out;
++	}
++
++	/* build the storage structure? */
++	if(dtopd(dentry)->state == UNMODIFIED) {
++                err = build_sto_structure(dentry->d_parent, dentry);
++                if(err) {
++                        printk(KERN_CRIT "mini_fo: meta_write_r_entry: \
++                                          build_sto_structure failed.\n");
++			goto out;
++                }
++        }
++	meta_dentry = lookup_one_len(META_FILENAME,
++				     dtohd2(dentry),
++				     strlen (META_FILENAME));
++        if(!meta_dentry->d_inode) {
++                /* We need to create a META-file */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR, NULL);
++#else
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR);
++#endif
++	}
++        /* open META-file for writing */
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        if(!meta_file || IS_ERR(meta_file)) {
++                printk(KERN_CRIT "mini_fo: meta_write_r_entry: \
++                                  ERROR opening meta file.\n");
++                mntput(meta_mnt);
++                dput(meta_dentry);
++		err = -1;
++                goto out;
++        }
++
++        /* check if fs supports writing */
++        if(!meta_file->f_op->write) {
++                printk(KERN_CRIT "mini_fo: meta_write_r_entry: \
++                                  ERROR, fs does not support writing.\n");
++                goto out_err_close;
++        }
++
++	meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */
++        old_fs = get_fs();
++        set_fs(KERNEL_DS);
++
++	/* size: 2 for "R ", old_len+new_len for names, 1 blank+1 \n */
++	buf_len = old_len + new_len + 4;
++	buf = (char *) kmalloc(buf_len, GFP_KERNEL);
++	if (!buf) {
++		printk(KERN_CRIT "mini_fo: meta_write_r_entry: out of mem.\n");
++		return -ENOMEM;
++	}
++
++	buf[0] = 'R';
++	buf[1] = ' ';
++	strncpy(buf + 2, old_name, old_len);
++	buf[old_len + 2] = ' ';
++	strncpy(buf + old_len + 3, new_name, new_len);
++	buf[buf_len -1] = '\n';
++	bytes = meta_file->f_op->write(meta_file, buf, buf_len, &meta_file->f_pos);
++	if(bytes != buf_len) {
++		printk(KERN_CRIT "mini_fo: meta_write_r_entry: ERROR writing.\n");
++		err = -1;
++	}
++
++	kfree(buf);
++	set_fs(old_fs);
++
++ out_err_close:
++	fput(meta_file);
++ out:
++	return err;
++}
++
++/* sync D list to disk, append data if app_flag is 1 */
++/* check the meta_mnt, which seems not to be used (properly)  */
++
++int meta_sync_d_list(dentry_t *dentry, int app_flag)
++{
++	dentry_t *meta_dentry;
++        file_t *meta_file;
++        mm_segment_t old_fs;
++
++        int bytes, err;
++        struct vfsmount *meta_mnt;
++        char *buf;
++
++	struct list_head *tmp;
++        struct deleted_entry *del_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	err = 0;
++	meta_file=0;
++	meta_mnt=0;
++
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                  invalid inode passed.\n");
++		err = -1;
++		goto out;
++	}
++	inode_info = itopd(dentry->d_inode);
++
++        if(inode_info->deleted_list_size < 0) {
++		err = -1;
++		goto out;
++	}
++
++	/* ok, there is something to sync */
++
++	/* build the storage structure? */
++        if(!dtohd2(dentry) && !itohi2(dentry->d_inode)) {
++                err = build_sto_structure(dentry->d_parent, dentry);
++                if(err) {
++                        printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                          build_sto_structure failed.\n");
++			goto out;
++                }
++        }
++	meta_dentry = lookup_one_len(META_FILENAME,
++				     dtohd2(dentry),
++				     strlen(META_FILENAME));
++        if(!meta_dentry->d_inode) {
++                /* We need to create a META-file */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR, NULL);
++#else
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR);
++#endif
++		app_flag = 0;
++	}
++	/* need we truncate the meta file? */
++	if(!app_flag) {
++		struct iattr newattrs;
++                newattrs.ia_size = 0;
++                newattrs.ia_valid = ATTR_SIZE | ATTR_CTIME;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&meta_dentry->d_inode->i_mutex);
++#else
++                down(&meta_dentry->d_inode->i_sem);
++#endif
++                err = notify_change(meta_dentry, &newattrs);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&meta_dentry->d_inode->i_mutex);
++#else
++                up(&meta_dentry->d_inode->i_sem);
++#endif
++
++                if(err || meta_dentry->d_inode->i_size != 0) {
++                        printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                          ERROR truncating meta file.\n");
++                        goto out_err_close;
++		}
++	}
++
++        /* open META-file for writing */
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        if(!meta_file || IS_ERR(meta_file)) {
++                printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                  ERROR opening meta file.\n");
++		/* we don't mntget so we dont't mntput (for now)
++		 * mntput(meta_mnt);
++		 */
++		dput(meta_dentry);
++		err = -1;
++                goto out;
++        }
++
++        /* check if fs supports writing */
++        if(!meta_file->f_op->write) {
++                printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                  ERROR, fs does not support writing.\n");
++                goto out_err_close;
++        }
++
++	meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */
++        old_fs = get_fs();
++        set_fs(KERNEL_DS);
++
++	/* here we go... */
++        list_for_each(tmp, &inode_info->deleted_list) {
++		del_entry = list_entry(tmp, struct deleted_entry, list);
++
++		/* size: len for name, 1 for \n and 2 for "D " */
++		buf = (char *) kmalloc(del_entry->len+3, GFP_KERNEL);
++		if (!buf) {
++			printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                          out of mem.\n");
++			return -ENOMEM;
++		}
++
++		buf[0] = 'D';
++		buf[1] = ' ';
++		strncpy(buf+2, del_entry->name, del_entry->len);
++		buf[del_entry->len+2] = '\n';
++		bytes = meta_file->f_op->write(meta_file, buf,
++					       del_entry->len+3,
++					       &meta_file->f_pos);
++		if(bytes != del_entry->len+3) {
++			printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                          ERROR writing.\n");
++			err |= -1;
++		}
++		kfree(buf);
++	}
++	set_fs(old_fs);
++
++ out_err_close:
++	fput(meta_file);
++ out:
++	return err;
++
++}
++
++int meta_sync_r_list(dentry_t *dentry, int app_flag)
++{
++	dentry_t *meta_dentry;
++        file_t *meta_file;
++        mm_segment_t old_fs;
++
++        int bytes, err, buf_len;
++        struct vfsmount *meta_mnt;
++        char *buf;
++
++	struct list_head *tmp;
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	err = 0;
++	meta_file=0;
++	meta_mnt=0;
++
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                  invalid dentry passed.\n");
++		err = -1;
++		goto out;
++	}
++	inode_info = itopd(dentry->d_inode);
++
++        if(inode_info->deleted_list_size < 0) {
++		err = -1;
++		goto out;
++	}
++
++	/* ok, there is something to sync */
++
++	/* build the storage structure? */
++        if(!dtohd2(dentry) && !itohi2(dentry->d_inode)) {
++                err = build_sto_structure(dentry->d_parent, dentry);
++                if(err) {
++                        printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                          build_sto_structure failed.\n");
++			goto out;
++                }
++        }
++	meta_dentry = lookup_one_len(META_FILENAME,
++				     dtohd2(dentry),
++				     strlen(META_FILENAME));
++        if(!meta_dentry->d_inode) {
++                /* We need to create a META-file */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR, NULL);
++#else
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR);
++#endif
++		app_flag = 0;
++	}
++	/* need we truncate the meta file? */
++	if(!app_flag) {
++		struct iattr newattrs;
++                newattrs.ia_size = 0;
++                newattrs.ia_valid = ATTR_SIZE | ATTR_CTIME;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&meta_dentry->d_inode->i_mutex);
++#else
++                down(&meta_dentry->d_inode->i_sem);
++#endif
++                err = notify_change(meta_dentry, &newattrs);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&meta_dentry->d_inode->i_mutex);
++#else
++                up(&meta_dentry->d_inode->i_sem);
++#endif
++                if(err || meta_dentry->d_inode->i_size != 0) {
++                        printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                          ERROR truncating meta file.\n");
++                        goto out_err_close;
++		}
++	}
++
++        /* open META-file for writing */
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        if(!meta_file || IS_ERR(meta_file)) {
++                printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                  ERROR opening meta file.\n");
++		/* we don't mntget so we dont't mntput (for now)
++		 * mntput(meta_mnt);
++		 */
++		dput(meta_dentry);
++		err = -1;
++                goto out;
++        }
++
++        /* check if fs supports writing */
++        if(!meta_file->f_op->write) {
++                printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                  ERROR, fs does not support writing.\n");
++                goto out_err_close;
++        }
++
++	meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */
++        old_fs = get_fs();
++        set_fs(KERNEL_DS);
++
++	/* here we go... */
++        list_for_each(tmp, &inode_info->renamed_list) {
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		/* size:
++		 * 2 for "R ", old_len+new_len for names, 1 blank+1 \n */
++		buf_len = ren_entry->old_len + ren_entry->new_len + 4;
++		buf = (char *) kmalloc(buf_len, GFP_KERNEL);
++		if (!buf) {
++			printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                          out of mem.\n");
++			return -ENOMEM;
++		}
++		buf[0] = 'R';
++		buf[1] = ' ';
++		strncpy(buf + 2, ren_entry->old_name, ren_entry->old_len);
++		buf[ren_entry->old_len + 2] = ' ';
++		strncpy(buf + ren_entry->old_len + 3,
++			ren_entry->new_name, ren_entry->new_len);
++		buf[buf_len - 1] = '\n';
++		bytes = meta_file->f_op->write(meta_file, buf,
++					       buf_len, &meta_file->f_pos);
++		if(bytes != buf_len) {
++			printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                          ERROR writing.\n");
++			err |= -1;
++		}
++		kfree(buf);
++	}
++	set_fs(old_fs);
++
++ out_err_close:
++	fput(meta_file);
++ out:
++	return err;
++}
++
++int meta_check_d_entry(dentry_t *dentry, const char *name, int len)
++{
++	if(!dentry || !dentry->d_inode)
++		printk(KERN_CRIT "mini_fo: meta_check_d_dentry: \
++                                  invalid dentry passed.\n");
++	return __meta_check_d_entry(dentry->d_inode, name, len);
++}
++
++int __meta_check_d_entry(inode_t *inode, const char *name, int len)
++{
++	struct list_head *tmp;
++        struct deleted_entry *del_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode))
++		printk(KERN_CRIT "mini_fo: __meta_check_d_dentry: \
++                                  invalid inode passed.\n");
++
++        inode_info = itopd(inode);
++
++        if(inode_info->deleted_list_size <= 0)
++                return 0;
++
++        list_for_each(tmp, &inode_info->deleted_list) {
++		del_entry = list_entry(tmp, struct deleted_entry, list);
++		if(del_entry->len != len)
++			continue;
++
++		if(!strncmp(del_entry->name, name, len))
++			return 1;
++	}
++	return 0;
++}
++
++/*
++ * check if file has been renamed and return path to orig. base dir.
++ * Implements no error return values so far, what of course sucks.
++ * String is null terminated.'
++ */
++char* meta_check_r_entry(dentry_t *dentry, const char *name, int len)
++{
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_check_r_dentry: \
++                                  invalid dentry passed.\n");
++		return NULL;
++	}
++	return __meta_check_r_entry(dentry->d_inode, name, len);
++}
++
++char* __meta_check_r_entry(inode_t *inode, const char *name, int len)
++{
++	struct list_head *tmp;
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++	char *old_path;
++
++	if(!inode || !itopd(inode)) {
++		printk(KERN_CRIT "mini_fo: meta_check_r_dentry: \
++                                  invalid inode passed.\n");
++		return NULL;
++	}
++	inode_info = itopd(inode);
++
++        if(inode_info->renamed_list_size <= 0)
++                return NULL;
++
++        list_for_each(tmp, &inode_info->renamed_list) {
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		if(ren_entry->new_len != len)
++			continue;
++
++		if(!strncmp(ren_entry->new_name, name, len)) {
++			old_path = (char *)
++				kmalloc(ren_entry->old_len+1, GFP_KERNEL);
++			strncpy(old_path,
++				ren_entry->old_name,
++				ren_entry->old_len);
++			old_path[ren_entry->old_len]='\0';
++			return old_path;
++		}
++	}
++	return NULL;
++}
++
++/*
++ * This version only checks if entry exists and return:
++ *     1 if exists,
++ *     0 if not,
++ *    -1 if error.
++ */
++int meta_is_r_entry(dentry_t *dentry, const char *name, int len)
++{
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_check_r_dentry [2]: \
++                                  invalid dentry passed.\n");
++		return -1;
++	}
++	return __meta_is_r_entry(dentry->d_inode, name, len);
++}
++
++int __meta_is_r_entry(inode_t *inode, const char *name, int len)
++{
++	struct list_head *tmp;
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode)) {
++		printk(KERN_CRIT "mini_fo: meta_check_r_dentry [2]: \
++                                  invalid inode passed.\n");
++		return -1;
++	}
++	inode_info = itopd(inode);
++
++        if(inode_info->renamed_list_size <= 0)
++                return -1;
++
++        list_for_each(tmp, &inode_info->renamed_list) {
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		if(ren_entry->new_len != len)
++			continue;
++
++		if(!strncmp(ren_entry->new_name, name, len))
++			return 1;
++	}
++	return 0;
++}
++
+--- /dev/null
++++ b/fs/mini_fo/mini_fo.h
+@@ -0,0 +1,510 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifndef __MINI_FO_H_
++#define __MINI_FO_H_
++
++#ifdef __KERNEL__
++
++/* META stuff */
++#define META_FILENAME "META_dAfFgHE39ktF3HD2sr"
++
++/* use xattrs? */
++#define XATTR
++
++/* File attributes that when changed, result in a file beeing copied to storage */
++#define COPY_FLAGS ATTR_MODE | ATTR_UID | ATTR_GID | ATTR_SIZE
++
++/*
++ * mini_fo filestates
++ */
++#define MODIFIED       1
++#define UNMODIFIED     2
++#define CREATED        3
++#define DEL_REWRITTEN  4
++#define DELETED        5
++#define NON_EXISTANT   6
++
++/* fist file systems superblock magic */
++# define MINI_FO_SUPER_MAGIC 0xf15f
++
++/*
++ * STRUCTURES:
++ */
++
++/* mini_fo inode data in memory */
++struct mini_fo_inode_info {
++	inode_t *wii_inode;
++	inode_t *wii_inode2; /* pointer to storage inode */
++
++	/* META-data lists */
++	/* deleted list, ex wol */
++	struct list_head deleted_list;
++	int deleted_list_size;
++
++	/* renamed list */
++	struct list_head renamed_list;
++	int renamed_list_size;
++
++	/* add other lists here ... */
++};
++
++/* mini_fo dentry data in memory */
++struct mini_fo_dentry_info {
++	dentry_t *wdi_dentry;
++	dentry_t *wdi_dentry2; /* pointer to  storage dentry */
++	unsigned int state;  /* state of the mini_fo dentry */
++};
++
++
++/* mini_fo super-block data in memory */
++struct mini_fo_sb_info {
++	super_block_t *wsi_sb, *wsi_sb2; /* mk: might point to the same sb */
++	struct vfsmount *hidden_mnt, *hidden_mnt2;
++	dentry_t *base_dir_dentry;
++	dentry_t *storage_dir_dentry;
++	;
++};
++
++/* readdir_data, readdir helper struct */
++struct readdir_data {
++	struct list_head ndl_list; /* linked list head ptr */
++	int ndl_size; /* list size */
++	int sto_done; /* flag to show that the storage dir entries have
++		       * all been read an now follow base entries */
++};
++
++/* file private data. */
++struct mini_fo_file_info {
++	struct file *wfi_file;
++	struct file *wfi_file2; /* pointer to storage file */
++	struct readdir_data rd;
++};
++
++/* struct ndl_entry */
++struct ndl_entry {
++	struct list_head list;
++	char *name;
++	int len;
++};
++
++/********************************
++ *  META-data structures
++ ********************************/
++
++/* deleted entry */
++struct deleted_entry {
++	struct list_head list;
++	char *name;
++	int len;
++};
++
++/* renamed entry */
++struct renamed_entry {
++	struct list_head list;
++	char *old_name;     /* old directory with full path */
++	int old_len;        /* length of above string */
++	char *new_name;     /* new directory name */
++	int new_len;        /* length of above string */
++};
++
++/* attr_change entry */
++struct attr_change_entry {
++	struct list_head list;
++	char *name;
++	int len;
++};
++
++/* link entry */
++struct link_entry {
++	struct list_head list;
++	int links_moved;
++	int inum_base;
++	int inum_sto;
++	char *weird_name;
++	int weird_name_len;
++};
++
++
++/* Some other stuff required for mini_fo_filldir64, copied from
++ * fs/readdir.c
++ */
++
++#define ROUND_UP64(x) (((x)+sizeof(u64)-1) & ~(sizeof(u64)-1))
++#define NAME_OFFSET(de) ((int) ((de)->d_name - (char *) (de)))
++
++
++struct linux_dirent64 {
++        u64             d_ino;
++        s64             d_off;
++        unsigned short  d_reclen;
++        unsigned char   d_type;
++        char            d_name[0];
++};
++
++
++struct getdents_callback64 {
++        struct linux_dirent64 * current_dir;
++        struct linux_dirent64 * previous;
++        int count;
++        int error;
++};
++
++struct linux_dirent {
++	unsigned long   d_ino;
++	unsigned long   d_off;
++	unsigned short  d_reclen;
++	char            d_name[1];
++};
++
++struct getdents_callback {
++	struct linux_dirent * current_dir;
++	struct linux_dirent * previous;
++	int count;
++	int error;
++};
++
++
++/*
++ * MACROS:
++ */
++
++/* file TO private_data */
++# define ftopd(file) ((struct mini_fo_file_info *)((file)->private_data))
++# define __ftopd(file) ((file)->private_data)
++/* file TO hidden_file */
++# define ftohf(file) ((ftopd(file))->wfi_file)
++# define ftohf2(file) ((ftopd(file))->wfi_file2)
++
++/* inode TO private_data */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++# define itopd(ino) ((struct mini_fo_inode_info *)(ino)->i_private)
++# define __itopd(ino) ((ino)->i_private)
++#else
++# define itopd(ino) ((struct mini_fo_inode_info *)(ino)->u.generic_ip)
++# define __itopd(ino) ((ino)->u.generic_ip)
++#endif
++/* inode TO hidden_inode */
++# define itohi(ino) (itopd(ino)->wii_inode)
++# define itohi2(ino) (itopd(ino)->wii_inode2)
++
++/* superblock TO private_data */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++# define stopd(super) ((struct mini_fo_sb_info *)(super)->s_fs_info)
++# define __stopd(super) ((super)->s_fs_info)
++#else
++# define stopd(super) ((struct mini_fo_sb_info *)(super)->u.generic_sbp)
++# define __stopd(super) ((super)->u.generic_sbp)
++#endif
++
++/* unused? # define vfs2priv stopd */
++/* superblock TO hidden_superblock */
++
++# define stohs(super) (stopd(super)->wsi_sb)
++# define stohs2(super) (stopd(super)->wsi_sb2)
++
++/* dentry TO private_data */
++# define dtopd(dentry) ((struct mini_fo_dentry_info *)(dentry)->d_fsdata)
++# define __dtopd(dentry) ((dentry)->d_fsdata)
++/* dentry TO hidden_dentry */
++# define dtohd(dent) (dtopd(dent)->wdi_dentry)
++# define dtohd2(dent) (dtopd(dent)->wdi_dentry2)
++
++/* dentry to state */
++# define dtost(dent) (dtopd(dent)->state)
++# define sbt(sb) ((sb)->s_type->name)
++
++#define IS_WRITE_FLAG(flag) (flag & (O_RDWR | O_WRONLY | O_APPEND))
++#define IS_COPY_FLAG(flag) (flag & (COPY_FLAGS))
++
++/* macros to simplify non-SCA code */
++#  define MALLOC_PAGE_POINTERS(hidden_pages, num_hidden_pages)
++#  define MALLOC_PAGEDATA_POINTERS(hidden_pages_data, num_hidden_pages)
++#  define FREE_PAGE_POINTERS(hidden_pages, num)
++#  define FREE_PAGEDATA_POINTERS(hidden_pages_data, num)
++#  define FOR_EACH_PAGE
++#  define CURRENT_HIDDEN_PAGE hidden_page
++#  define CURRENT_HIDDEN_PAGEDATA hidden_page_data
++#  define CURRENT_HIDDEN_PAGEINDEX page->index
++
++/*
++ * EXTERNALS:
++ */
++extern struct file_operations mini_fo_main_fops;
++extern struct file_operations mini_fo_dir_fops;
++extern struct inode_operations mini_fo_main_iops;
++extern struct inode_operations mini_fo_dir_iops;
++extern struct inode_operations mini_fo_symlink_iops;
++extern struct super_operations mini_fo_sops;
++extern struct dentry_operations mini_fo_dops;
++extern struct vm_operations_struct mini_fo_shared_vmops;
++extern struct vm_operations_struct mini_fo_private_vmops;
++extern struct address_space_operations mini_fo_aops;
++
++#if 0 /* unused by mini_fo */
++extern int mini_fo_interpose(dentry_t *hidden_dentry, dentry_t *this_dentry, super_block_t *sb, int flag);
++#if defined(FIST_FILTER_DATA) || defined(FIST_FILTER_SCA)
++extern page_t *mini_fo_get1page(file_t *file, int index);
++extern int mini_fo_fill_zeros(file_t *file, page_t *page, unsigned from);
++# endif /* FIST_FILTER_DATA || FIST_FILTER_SCA */
++
++
++#  define mini_fo_hidden_dentry(d) __mini_fo_hidden_dentry(__FILE__,__FUNCTION__,__LINE__,(d))
++#  define mini_fo_hidden_sto_dentry(d) __mini_fo_hidden_sto_dentry(__FILE__,__FUNCTION__,__LINE__,(d))
++
++extern dentry_t *__mini_fo_hidden_dentry(char *file, char *func, int line, dentry_t *this_dentry);
++extern dentry_t *__mini_fo_hidden_sto_dentry(char *file, char *func, int line, dentry_t *this_dentry);
++
++extern int mini_fo_read_file(const char *filename, void *buf, int len);
++extern int mini_fo_write_file(const char *filename, void *buf, int len);
++extern dentry_t *fist_lookup(dentry_t *dir, const char *name, vnode_t **out, uid_t uid, gid_t gid);
++#endif /* unused by mini_fo */
++
++/* state transition functions */
++extern int nondir_unmod_to_mod(dentry_t *dentry, int cp_flag);
++extern int nondir_del_rew_to_del(dentry_t *dentry);
++extern int nondir_creat_to_del(dentry_t *dentry);
++extern int nondir_mod_to_del(dentry_t *dentry);
++extern int nondir_unmod_to_del(dentry_t *dentry);
++
++extern int dir_unmod_to_mod(dentry_t *dentry);
++
++/* rename specials */
++extern int rename_directory(inode_t *old_dir, dentry_t *old_dentry, inode_t *new_dir, dentry_t *new_dentry);
++extern int rename_nondir(inode_t *old_dir, dentry_t *old_dentry, inode_t *new_dir, dentry_t *new_dentry);
++
++/* misc stuff */
++extern int mini_fo_tri_interpose(dentry_t *hidden_dentry,
++				 dentry_t *hidden_sto_dentry,
++				 dentry_t *dentry,
++				 super_block_t *sb, int flag);
++
++extern int mini_fo_cp_cont(dentry_t *tgt_dentry, struct vfsmount *tgt_mnt,
++			   dentry_t *src_dentry, struct vfsmount *src_mnt);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++extern int mini_fo_create(inode_t *dir, dentry_t *dentry, int mode, struct nameidata *nd);
++
++extern int create_sto_nod(dentry_t *dentry, int mode, dev_t dev);
++extern int create_sto_reg_file(dentry_t *dentry, int mode, struct nameidata *nd);
++#else
++extern int mini_fo_create(inode_t *dir, dentry_t *dentry, int mode);
++
++extern int create_sto_nod(dentry_t *dentry, int mode, int dev);
++extern int create_sto_reg_file(dentry_t *dentry, int mode);
++#endif
++
++extern int create_sto_dir(dentry_t *dentry, int mode);
++
++extern int exists_in_storage(dentry_t *dentry);
++extern int is_mini_fo_existant(dentry_t *dentry);
++extern int get_neg_sto_dentry(dentry_t *dentry);
++extern int build_sto_structure(dentry_t *dir, dentry_t *dentry);
++extern int get_mini_fo_bpath(dentry_t *dentry, char **bpath, int *bpath_len);
++extern dentry_t *bpath_walk(super_block_t *sb, char *bpath);
++extern int bpath_put(dentry_t *dentry);
++
++/* check_mini_fo types functions */
++extern int check_mini_fo_dentry(dentry_t *dentry);
++extern int check_mini_fo_file(file_t *file);
++extern int check_mini_fo_inode(inode_t *inode);
++
++/* General meta functions, can be called from outside of meta.c */
++extern int meta_build_lists(dentry_t *dentry);
++extern int meta_put_lists(dentry_t *dentry);
++extern int __meta_put_lists(inode_t *inode);
++
++extern int meta_add_d_entry(dentry_t *dentry, const char *name, int len);
++extern int meta_add_r_entry(dentry_t *dentry,
++			    const char *old_name, int old_len,
++			    const char *new_name, int new_len);
++
++extern int meta_remove_r_entry(dentry_t *dentry, const char *name, int len);
++
++extern int meta_check_d_entry(dentry_t *dentry, const char *name, int len);
++extern int __meta_check_d_entry(inode_t *inode, const char *name, int len);
++
++extern char* meta_check_r_entry(dentry_t *dentry, const char *name, int len);
++extern char* __meta_check_r_entry(inode_t *inode, const char *name, int len);
++extern int meta_is_r_entry(dentry_t *dentry, const char *name, int len);
++extern int __meta_is_r_entry(inode_t *inode, const char *name, int len);
++
++/* Specific meta functions, should be called only inside meta.c */
++extern int __meta_put_d_list(inode_t *inode);
++extern int __meta_put_r_list(inode_t *inode);
++
++extern int meta_list_add_d_entry(dentry_t *dentry,
++				 const char *name, int len);
++extern int meta_list_add_r_entry(dentry_t *dentry,
++				 const char *old_name, int old_len,
++				 const char *new_name, int new_len);
++
++extern int meta_list_remove_r_entry(dentry_t *dentry,
++				    const char *name, int len);
++
++extern int __meta_list_remove_r_entry(inode_t *inode,
++				      const char *name, int len);
++
++extern int meta_write_d_entry(dentry_t *dentry, const char *name, int len);
++extern int meta_write_r_entry(dentry_t *dentry,
++			      const char *old_name, int old_len,
++			      const char *new_name, int new_len);
++
++extern int meta_sync_lists(dentry_t *dentry);
++extern int meta_sync_d_list(dentry_t *dentry, int app_flag);
++extern int meta_sync_r_list(dentry_t *dentry, int app_flag);
++
++/* ndl stuff */
++extern int ndl_add_entry(struct readdir_data *rd, const char *name, int len);
++extern void ndl_put_list(struct readdir_data *rd);
++extern int ndl_check_entry(struct readdir_data *rd,
++			   const char *name, int len);
++
++
++# define copy_inode_size(dst, src) \
++    dst->i_size = src->i_size; \
++    dst->i_blocks = src->i_blocks;
++
++static inline void
++fist_copy_attr_atime(inode_t *dest, const inode_t *src)
++{
++	ASSERT(dest != NULL);
++	ASSERT(src != NULL);
++	dest->i_atime = src->i_atime;
++}
++static inline void
++fist_copy_attr_times(inode_t *dest, const inode_t *src)
++{
++	ASSERT(dest != NULL);
++	ASSERT(src != NULL);
++	dest->i_atime = src->i_atime;
++	dest->i_mtime = src->i_mtime;
++	dest->i_ctime = src->i_ctime;
++}
++static inline void
++fist_copy_attr_timesizes(inode_t *dest, const inode_t *src)
++{
++	ASSERT(dest != NULL);
++	ASSERT(src != NULL);
++	dest->i_atime = src->i_atime;
++	dest->i_mtime = src->i_mtime;
++	dest->i_ctime = src->i_ctime;
++	copy_inode_size(dest, src);
++}
++static inline void
++fist_copy_attr_all(inode_t *dest, const inode_t *src)
++{
++	ASSERT(dest != NULL);
++	ASSERT(src != NULL);
++	dest->i_mode = src->i_mode;
++	dest->i_nlink = src->i_nlink;
++	dest->i_uid = src->i_uid;
++	dest->i_gid = src->i_gid;
++	dest->i_rdev = src->i_rdev;
++	dest->i_atime = src->i_atime;
++	dest->i_mtime = src->i_mtime;
++	dest->i_ctime = src->i_ctime;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)
++	dest->i_blksize = src->i_blksize;
++#endif
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,12)
++	dest->i_blkbits = src->i_blkbits;
++# endif /* linux 2.4.12 and newer */
++	copy_inode_size(dest, src);
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	dest->i_attr_flags = src->i_attr_flags;
++#else
++	dest->i_flags = src->i_flags;
++#endif
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++/* copied from linux/fs.h */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++static inline void double_lock(struct dentry *d1, struct dentry *d2)
++{
++	struct mutex *m1 = &d1->d_inode->i_mutex;
++	struct mutex *m2 = &d2->d_inode->i_mutex;
++	if (m1 != m2) {
++		if ((unsigned long) m1 < (unsigned long) m2) {
++			struct mutex *tmp = m2;
++			m2 = m1; m1 = tmp;
++		}
++		mutex_lock(m1);
++	}
++	mutex_lock(m2);
++}
++
++static inline void double_unlock(struct dentry *d1, struct dentry *d2)
++{
++	struct mutex *m1 = &d1->d_inode->i_mutex;
++	struct mutex *m2 = &d2->d_inode->i_mutex;
++	mutex_unlock(m1);
++	if (m1 != m2)
++		mutex_unlock(m2);
++	dput(d1);
++	dput(d2);
++}
++
++#else
++static inline void double_down(struct semaphore *s1, struct semaphore *s2)
++{
++        if (s1 != s2) {
++                if ((unsigned long) s1 < (unsigned long) s2) {
++                        struct semaphore *tmp = s2;
++                        s2 = s1; s1 = tmp;
++                }
++                down(s1);
++        }
++        down(s2);
++}
++
++static inline void double_up(struct semaphore *s1, struct semaphore *s2)
++{
++        up(s1);
++        if (s1 != s2)
++                up(s2);
++}
++
++static inline void double_lock(struct dentry *d1, struct dentry *d2)
++{
++        double_down(&d1->d_inode->i_sem, &d2->d_inode->i_sem);
++}
++
++static inline void double_unlock(struct dentry *d1, struct dentry *d2)
++{
++        double_up(&d1->d_inode->i_sem,&d2->d_inode->i_sem);
++        dput(d1);
++        dput(d2);
++}
++#endif   /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) */
++#endif  /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) */
++#endif /* __KERNEL__ */
++
++/*
++ * Definitions for user and kernel code
++ */
++
++/* ioctls */
++
++#endif	/* not __MINI_FO_H_ */
+--- /dev/null
++++ b/fs/mini_fo/mini_fo-merge
+@@ -0,0 +1,180 @@
++#!/bin/bash
++#
++# Copyright (C) 2005 Markus Klotzbuecher <mk@creamnet.de>
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License
++# as published by the Free Software Foundation; either version
++# 2 of the License, or (at your option) any later version.
++#
++
++BASE=
++STO=
++HELP=
++DRYRUN=
++VERBOSE=
++TMP="/tmp/"
++META_NAME="META_dAfFgHE39ktF3HD2sr"
++SKIP_DEL_LIST="skip-delete-list.mini_fo-merge"
++
++COMMAND=
++exec_command()
++{
++    if [ x$DRYRUN == "xset" ]; then
++	echo "  would run: $COMMAND"
++    elif ! [ x$DRYRUN == "xset" ]; then
++	if [ x$VERBOSE == "xset" ]; then
++	    echo "  running: $COMMAND"
++	fi
++	eval $COMMAND
++    fi
++}
++
++usage()
++{
++cat <<EOF
++
++USAGE: $0 -b <base dir> -s <storage dir>
++Version 0.1
++
++This script merges the contents of a mini_fo storage file system back
++to the base file system.
++
++!!! Warning: This will modify the base filesystem and can destroy data
++             if used wrongly.
++
++Options:
++     -b <base dir>
++          the directory of the base file system.
++
++     -s <storage dir>
++          the directory of the storage file system.
++
++     -d   dry run, will not change anything and print the commands that
++          would be executed.
++
++     -t   tmp dir for storing temporary file. default: $TMP
++
++     -v   show what operations are performed.
++
++     -h   displays this message.
++
++EOF
++}
++
++# parse parameters
++while getopts hdvt:b:s: OPTS
++  do
++  case $OPTS in
++      h)  HELP="set";;
++      d)  DRYRUN="set";;
++      v)  VERBOSE="set";;
++      b)  BASE="$OPTARG";;
++      s)  STO="$OPTARG";;
++      t)  TMP="$OPTARG";;
++      ?)  usage
++	  exit 1;;
++  esac
++done
++
++if [ "x$HELP" == "xset" ]; then
++    usage
++    exit -1
++fi
++
++if ! [ -d "$BASE" ] || ! [ -d "$STO" ]; then
++    echo -e "$0:\n Error, -s and/or -b argument missing. type $0 -h for help."
++    exit -1;
++fi
++
++# get full paths
++pushd $STO; STO=`pwd`; popd
++pushd $BASE; BASE=`pwd`; popd
++TMP=${TMP%/}
++
++
++cat<<EOF
++###############################################################################
++# mini_fo-merge
++#
++# base dir:       $BASE
++# storage dir:    $STO
++# meta filename:  $META_NAME
++# dry run:        $DRYRUN
++# verbose:        $VERBOSE
++# tmp files:      $TMP
++###############################################################################
++
++EOF
++
++rm $TMP/$SKIP_DEL_LIST
++
++# first process all renamed dirs
++echo "Merging renamed directories..."
++pushd $STO &> /dev/null
++find . -name $META_NAME -type f -print0  | xargs -0 -e grep  -e '^R ' | tr -s ':R' ' ' | while read ENTRY; do
++    echo "entry: $ENTRY"
++    META_FILE=`echo $ENTRY | cut -d ' ' -f 1`
++    OLD_B_DIR=`echo $ENTRY | cut -d ' ' -f 2 | sed -e 's/\///'`
++    NEW_NAME=`echo $ENTRY | cut -d ' ' -f 3`
++    NEW_B_DIR=`echo $META_FILE | sed -e "s/$META_NAME/$NEW_NAME/" | sed -e 's/^\.\///'`
++    echo "META_FILE: $META_FILE"
++    echo "OLD_B_DIR: $OLD_B_DIR"
++    echo "NEW_NAME: $NEW_NAME"
++    echo  "NEW_B_DIR: $NEW_B_DIR"
++
++    pushd $BASE &> /dev/null
++    # remove an existing dir in storage
++    COMMAND="rm -rf $NEW_B_DIR"; exec_command
++    COMMAND="cp -R $OLD_B_DIR $NEW_B_DIR"; exec_command
++    echo ""
++    popd &> /dev/null
++
++    # remember this dir to exclude it from deleting later
++    echo $NEW_B_DIR >> $TMP/$SKIP_DEL_LIST
++done
++
++# delete all whiteouted files from base
++echo -e "\nDeleting whiteout'ed files from base file system..."
++find . -name $META_NAME -type f -print0  | xargs -0 -e grep  -e '^D ' | sed -e 's/:D//' | while read ENTRY; do
++    META_FILE=`echo $ENTRY | cut -d ' ' -f 1`
++    DEL_NAME=`echo $ENTRY | cut -d ' ' -f 2`
++    DEL_FILE=`echo $META_FILE | sed -e "s/$META_NAME/$DEL_NAME/" | sed -e 's/^\.\///'`
++    grep -x $DEL_FILE $TMP/$SKIP_DEL_LIST &> /dev/null
++    if [ $? -ne 0 ]; then
++	pushd $BASE &> /dev/null
++	COMMAND="rm -rf $DEL_FILE"; exec_command
++	popd &> /dev/null
++    else
++	echo "  excluding: $DEL_FILE as in skip-del-list."
++    fi
++done
++
++# create all dirs and update permissions
++echo -e "\nSetting up directory structures in base file system..."
++find . -type d | sed -e 's/^\.\///' | while read DIR; do
++    PERMS=`stat -c %a $DIR`
++    DIR_UID=`stat -c %u $DIR`
++    DIR_GID=`stat -c %g $DIR`
++    pushd $BASE &> /dev/null
++    if ! [ -d $DIR ]; then
++	COMMAND="mkdir -p $DIR"; exec_command
++    fi
++    COMMAND="chmod $PERMS $DIR"; exec_command
++    COMMAND="chown $DIR_UID:$DIR_GID $DIR"; exec_command
++    popd &> /dev/null
++done
++
++# merge all non-directory files
++echo -e "\nMerging all non-directory files...."
++for i in b c p f l s; do
++    find . -type $i | sed -e 's/^\.\///' | grep -v "$META_NAME" | while read FILE; do
++	pushd $BASE #&> /dev/null
++	COMMAND="cp -df $STO/$FILE $BASE/$FILE"; exec_command
++	popd &> /dev/null
++    done
++done
++popd &> /dev/null
++
++#rm $TMP/$SKIP_DEL_LIST
++
++echo "Done!"
+--- /dev/null
++++ b/fs/mini_fo/mini_fo-overlay
+@@ -0,0 +1,130 @@
++#!/bin/bash
++#
++# Copyright (C) 2005 Markus Klotzbuecher <mk@creamnet.de>
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License
++# as published by the Free Software Foundation; either version
++# 2 of the License, or (at your option) any later version.
++#
++
++HELP=
++SUFF=
++MNTP=
++MNT_DIR="/mnt"
++STO=
++STO_DIR="/tmp"
++BASE=
++
++usage()
++{
++cat <<EOF
++
++Usage: $0 [-s suffix] [-d sto_dir_dir] [-m mount point] base_dir
++Version 0.1
++
++This script overlays the given base directory using the mini_fo file
++system. If only the base directory base_dir is given, $0
++will use a storage directory called "sto-<base_dir_name>" in $STO_DIR,
++and mount point "mini_fo-<base_dir_dir>" in $MNT_DIR.
++
++Options:
++     -s <suffix>
++          add given suffix to storage directory and the mount
++          point. This is usefull for overlaying one base directory
++          several times and avoiding conflicts with storage directory
++          names and mount points.
++
++     -d <sto_dir_dir>
++          change the directory in which the storage directory will be
++          created (default is currently "$STO_DIR".
++
++     -m <mount point>
++          use an alternative directory to create the mini_fo
++          mountpoint (default is currently "$MNT_DIR".
++
++     -h   displays this message.
++
++EOF
++exit 1;
++}
++
++while getopts hm:s:d: OPTS
++  do
++  case $OPTS in
++      s)  SUFF="$OPTARG";;
++      d)  STO_DIR="$OPTARG";;
++      m)  MNT_DIR="$OPTARG";;
++      h)  HELP="set";;
++      ?)  usage
++	  exit 1;;
++  esac
++done
++shift $(($OPTIND - 1))
++
++BASE="$1"
++
++if [ "x$HELP" == "xset" ]; then
++    usage
++    exit -1
++fi
++
++# fix suffix
++if [ "x$SUFF" != "x" ]; then
++    SUFF="-$SUFF"
++fi
++
++# kill trailing slashes
++MNT_DIR=${MNT_DIR%/}
++STO_DIR=${STO_DIR%/}
++BASE=${BASE%/}
++
++
++if ! [ -d "$BASE" ]; then
++    echo "invalid base dir $BASE, run $0 -h for help."
++    exit -1
++fi
++
++# check opts
++if ! [ -d "$MNT_DIR" ]; then
++    echo "invalid mount dir $MNT_DIR, run $0 -h for help."
++    exit -1
++fi
++
++if ! [ -d "$STO_DIR" ]; then
++    echo "invalid sto_dir_dir $STO_DIR, run $0 -h for help."
++    exit -1
++fi
++
++MNTP="$MNT_DIR/mini_fo-`basename $BASE`$SUFF"
++STO="$STO_DIR/sto-`basename $BASE`$SUFF"
++
++# create the mount point if it doesn't exist
++mkdir -p $MNTP
++if [ $? -ne 0 ]; then
++    echo "Error, failed to create mount point $MNTP"
++fi
++
++mkdir -p $STO
++if [ $? -ne 0 ]; then
++    echo "Error, failed to create storage dir $STO"
++fi
++
++# check if fs is already mounted
++mount | grep mini_fo | grep $MNTP &> /dev/null
++if [ $? -eq 0 ]; then
++    echo "Error, existing mini_fo mount at $MNTP."
++    exit -1
++fi
++
++mount | grep mini_fo | grep $STO &> /dev/null
++if [ $? -eq 0 ]; then
++    echo "Error, $STO seems to be used already."
++    exit -1
++fi
++
++# mount
++mount -t mini_fo -o base=$BASE,sto=$STO $BASE $MNTP
++
++if [ $? -ne 0 ]; then
++    echo "Error, mounting failed, maybe no permisson to mount?"
++fi
+--- /dev/null
++++ b/fs/mini_fo/mmap.c
+@@ -0,0 +1,637 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif /* HAVE_CONFIG_H */
++
++#include "fist.h"
++#include "mini_fo.h"
++
++
++#ifdef FIST_COUNT_WRITES
++/* for counting writes in the middle vs. regular writes */
++unsigned long count_writes = 0, count_writes_middle = 0;
++#endif /* FIST_COUNT_WRITES */
++
++/* forward declaration of commit write and prepare write */
++STATIC int mini_fo_commit_write(file_t *file, page_t *page, unsigned from, unsigned to);
++STATIC int mini_fo_prepare_write(file_t *file, page_t *page, unsigned from, unsigned to);
++
++
++/*
++ * Function for handling creation of holes when lseek-ing past the
++ * end of the file and then writing some data.
++ */
++int
++mini_fo_fill_zeros(file_t* file, page_t *page, unsigned from)
++{
++	int err = 0;
++	dentry_t *dentry = file->f_dentry;
++	inode_t *inode = dentry->d_inode;
++	page_t *tmp_page;
++	int index;
++
++	print_entry_location();
++
++	for (index = inode->i_size >> PAGE_CACHE_SHIFT; index < page->index; index++) {
++		tmp_page = mini_fo_get1page(file, index);
++		if (IS_ERR(tmp_page)) {
++			err = PTR_ERR(tmp_page);
++			goto out;
++		}
++
++		/*
++		 * zero out rest of the contents of the page between the appropriate
++		 * offsets.
++		 */
++		memset((char*)page_address(tmp_page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, PAGE_CACHE_SIZE - (inode->i_size & ~PAGE_CACHE_MASK));
++
++		if (! (err = mini_fo_prepare_write(file, tmp_page, 0, PAGE_CACHE_SIZE)))
++			err = mini_fo_commit_write(file, tmp_page, 0, PAGE_CACHE_SIZE);
++
++		page_cache_release(tmp_page);
++		if (err < 0)
++			goto out;
++		if (current->need_resched)
++			schedule();
++	}
++
++	/* zero out appropriate parts of last page */
++
++	/*
++	 * if the encoding type is block, then adjust the 'from' (where the
++	 * zeroing will start) offset appropriately
++	 */
++	from = from & (~(FIST_ENCODING_BLOCKSIZE - 1));
++
++	if ((from - (inode->i_size & ~PAGE_CACHE_MASK)) > 0) {
++
++		memset((char*)page_address(page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, from - (inode->i_size & ~PAGE_CACHE_MASK));
++		if (! (err = mini_fo_prepare_write(file, page, 0, PAGE_CACHE_SIZE)))
++			err = mini_fo_commit_write(file, page, 0, PAGE_CACHE_SIZE);
++
++		if (err < 0)
++			goto out;
++		if (current->need_resched)
++			schedule();
++	}
++
++ out:
++	print_exit_status(err);
++	return err;
++}
++
++
++
++STATIC int
++mini_fo_writepage(page_t *page)
++{
++	int err = -EIO;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	page_t *hidden_page;
++	char *kaddr, *hidden_kaddr;
++
++	print_entry_location();
++
++	inode = page->mapping->host;
++	hidden_inode = itohi(inode);
++
++	/*
++	 * writepage is called when shared mmap'ed files need to write
++	 * their pages, while prepare/commit_write are called from the
++	 * non-paged write() interface.  (However, in 2.3 the two interfaces
++	 * share the same cache, while in 2.2 they didn't.)
++	 *
++	 * So we pretty much have to duplicate much of what commit_write does.
++	 */
++
++	/* find lower page (returns a locked page) */
++	hidden_page = grab_cache_page(hidden_inode->i_mapping, page->index);
++	if (!hidden_page)
++		goto out;
++
++	/* get page address, and encode it */
++	kaddr = (char *) kmap(page);
++	hidden_kaddr = (char*) kmap(hidden_page);
++	mini_fo_encode_block(kaddr, hidden_kaddr, PAGE_CACHE_SIZE, inode, inode->i_sb, page->index);
++	/* if encode_block could fail, then return error */
++	kunmap(page);
++	kunmap(hidden_page);
++
++	/* call lower writepage (expects locked page) */
++	err = hidden_inode->i_mapping->a_ops->writepage(hidden_page);
++
++	/*
++	 * update mtime and ctime of lower level file system
++	 * mini_fo' mtime and ctime are updated by generic_file_write
++	 */
++	hidden_inode->i_mtime = hidden_inode->i_ctime = CURRENT_TIME;
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,1)
++	UnlockPage(hidden_page);	/* b/c grab_cache_page locked it */
++# endif /* kernel older than 2.4.1 */
++	page_cache_release(hidden_page); /* b/c grab_cache_page increased refcnt */
++
++	if (err)
++		ClearPageUptodate(page);
++	else
++		SetPageUptodate(page);
++ out:
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,1)
++	UnlockPage(page);
++# endif /* kernel 2.4.1 and newer */
++	print_exit_status(err);
++	return err;
++}
++
++
++/*
++ * get one page from cache or lower f/s, return error otherwise.
++ * returns unlocked, up-to-date page (if ok), with increased refcnt.
++ */
++page_t *
++mini_fo_get1page(file_t *file, int index)
++{
++	page_t *page;
++	dentry_t *dentry;
++	inode_t *inode;
++	struct address_space *mapping;
++	int err;
++
++	print_entry_location();
++
++	dentry = file->f_dentry; /* CPW: Moved below print_entry_location */
++	inode = dentry->d_inode;
++	mapping = inode->i_mapping;
++
++	fist_dprint(8, "%s: read page index %d pid %d\n", __FUNCTION__, index, current->pid);
++	if (index < 0) {
++		printk("%s BUG: index=%d\n", __FUNCTION__, index);
++		page = ERR_PTR(-EIO);
++		goto out;
++	}
++	page = read_cache_page(mapping,
++			       index,
++			       (filler_t *) mapping->a_ops->readpage,
++			       (void *) file);
++	if (IS_ERR(page))
++		goto out;
++	wait_on_page(page);
++	if (!Page_Uptodate(page)) {
++		lock_page(page);
++		err = mapping->a_ops->readpage(file, page);
++		if (err) {
++			page = ERR_PTR(err);
++			goto out;
++		}
++		wait_on_page(page);
++		if (!Page_Uptodate(page)) {
++			page = ERR_PTR(-EIO);
++			goto out;
++		}
++	}
++
++ out:
++	print_exit_pointer(page);
++	return page;
++}
++
++
++/*
++ * get one page from cache or lower f/s, return error otherwise.
++ * similar to get1page, but doesn't guarantee that it will return
++ * an unlocked page.
++ */
++page_t *
++mini_fo_get1page_cached(file_t *file, int index)
++{
++	page_t *page;
++	dentry_t *dentry;
++	inode_t *inode;
++	struct address_space *mapping;
++	int err;
++
++	print_entry_location();
++
++	dentry = file->f_dentry; /* CPW: Moved below print_entry_location */
++	inode = dentry->d_inode;
++	mapping = inode->i_mapping;
++
++	fist_dprint(8, "%s: read page index %d pid %d\n", __FUNCTION__, index, current->pid);
++	if (index < 0) {
++		printk("%s BUG: index=%d\n", __FUNCTION__, index);
++		page = ERR_PTR(-EIO);
++		goto out;
++	}
++	page = read_cache_page(mapping,
++			       index,
++			       (filler_t *) mapping->a_ops->readpage,
++			       (void *) file);
++	if (IS_ERR(page))
++		goto out;
++
++ out:
++	print_exit_pointer(page);
++	return page;
++}
++
++
++/*
++ * readpage is called from generic_page_read and the fault handler.
++ * If your file system uses generic_page_read for the read op, it
++ * must implement readpage.
++ *
++ * Readpage expects a locked page, and must unlock it.
++ */
++STATIC int
++mini_fo_do_readpage(file_t *file, page_t *page)
++{
++	int err = -EIO;
++	dentry_t *dentry;
++	file_t *hidden_file = NULL;
++	dentry_t *hidden_dentry;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	char *page_data;
++	page_t *hidden_page;
++	char *hidden_page_data;
++	int real_size;
++
++	print_entry_location();
++
++	dentry = file->f_dentry; /* CPW: Moved below print_entry_location */
++	if (ftopd(file) != NULL)
++		hidden_file = ftohf(file);
++	hidden_dentry = dtohd(dentry);
++	inode = dentry->d_inode;
++	hidden_inode = itohi(inode);
++
++	fist_dprint(7, "%s: requesting page %d from file %s\n", __FUNCTION__, page->index, dentry->d_name.name);
++
++	MALLOC_PAGE_POINTERS(hidden_pages, num_hidden_pages);
++	MALLOC_PAGEDATA_POINTERS(hidden_pages_data, num_hidden_pages);
++	FOR_EACH_PAGE
++		CURRENT_HIDDEN_PAGE = NULL;
++
++	/* find lower page (returns a locked page) */
++	FOR_EACH_PAGE {
++		fist_dprint(8, "%s: Current page index = %d\n", __FUNCTION__, CURRENT_HIDDEN_PAGEINDEX);
++		CURRENT_HIDDEN_PAGE = read_cache_page(hidden_inode->i_mapping,
++						      CURRENT_HIDDEN_PAGEINDEX,
++						      (filler_t *) hidden_inode->i_mapping->a_ops->readpage,
++						      (void *) hidden_file);
++		if (IS_ERR(CURRENT_HIDDEN_PAGE)) {
++			err = PTR_ERR(CURRENT_HIDDEN_PAGE);
++			CURRENT_HIDDEN_PAGE = NULL;
++			goto out_release;
++		}
++	}
++
++	/*
++	 * wait for the page data to show up
++	 * (signaled by readpage as unlocking the page)
++	 */
++	FOR_EACH_PAGE {
++		wait_on_page(CURRENT_HIDDEN_PAGE);
++		if (!Page_Uptodate(CURRENT_HIDDEN_PAGE)) {
++			/*
++			 * call readpage() again if we returned from wait_on_page with a
++			 * page that's not up-to-date; that can happen when a partial
++			 * page has a few buffers which are ok, but not the whole
++			 * page.
++			 */
++			lock_page(CURRENT_HIDDEN_PAGE);
++			err = hidden_inode->i_mapping->a_ops->readpage(hidden_file,
++								       CURRENT_HIDDEN_PAGE);
++			if (err) {
++				CURRENT_HIDDEN_PAGE = NULL;
++				goto out_release;
++			}
++			wait_on_page(CURRENT_HIDDEN_PAGE);
++			if (!Page_Uptodate(CURRENT_HIDDEN_PAGE)) {
++				err = -EIO;
++				goto out_release;
++			}
++		}
++	}
++
++	/* map pages, get their addresses */
++	page_data = (char *) kmap(page);
++	FOR_EACH_PAGE
++		CURRENT_HIDDEN_PAGEDATA = (char *) kmap(CURRENT_HIDDEN_PAGE);
++
++	/* if decode_block could fail, then return error */
++	err = 0;
++	real_size = hidden_inode->i_size - (page->index << PAGE_CACHE_SHIFT);
++	if (real_size <= 0)
++		memset(page_data, 0, PAGE_CACHE_SIZE);
++	else if (real_size < PAGE_CACHE_SIZE) {
++		mini_fo_decode_block(hidden_page_data, page_data, real_size, inode, inode->i_sb, page->index);
++		memset(page_data + real_size, 0, PAGE_CACHE_SIZE - real_size);
++	} else
++		mini_fo_decode_block(hidden_page_data, page_data, PAGE_CACHE_SIZE, inode, inode->i_sb, page->index);
++
++	FOR_EACH_PAGE
++		kunmap(CURRENT_HIDDEN_PAGE);
++	kunmap(page);
++
++ out_release:
++	FOR_EACH_PAGE
++		if (CURRENT_HIDDEN_PAGE)
++			page_cache_release(CURRENT_HIDDEN_PAGE); /* undo read_cache_page */
++
++	FREE_PAGE_POINTERS(hidden_pages, num_hidden_pages);
++	FREE_PAGEDATA_POINTERS(hidden_pages_data, num_hidden_pages);
++
++ out:
++	if (err == 0)
++		SetPageUptodate(page);
++	else
++		ClearPageUptodate(page);
++
++	print_exit_status(err);
++	return err;
++}
++
++
++STATIC int
++mini_fo_readpage(file_t *file, page_t *page)
++{
++	int err;
++	print_entry_location();
++
++	err = mini_fo_do_readpage(file, page);
++
++	/*
++	 * we have to unlock our page, b/c we _might_ have gotten a locked page.
++	 * but we no longer have to wakeup on our page here, b/c UnlockPage does
++	 * it
++	 */
++	UnlockPage(page);
++
++	print_exit_status(err);
++	return err;
++}
++
++
++STATIC int
++mini_fo_prepare_write(file_t *file, page_t *page, unsigned from, unsigned to)
++{
++	int err = 0;
++
++	print_entry_location();
++
++	/*
++	 * we call kmap(page) only here, and do the kunmap
++	 * and the actual downcalls, including unlockpage and uncache
++	 * in commit_write.
++	 */
++	kmap(page);
++
++	/* fast path for whole page writes */
++	if (from == 0 && to == PAGE_CACHE_SIZE)
++		goto out;
++	/* read the page to "revalidate" our data */
++	/* call the helper function which doesn't unlock the page */
++	if (!Page_Uptodate(page))
++		err = mini_fo_do_readpage(file, page);
++
++ out:
++	print_exit_status(err);
++	return err;
++}
++
++
++
++STATIC int
++mini_fo_commit_write(file_t *file, page_t *page, unsigned from, unsigned to)
++{
++	int err = -ENOMEM;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	page_t *hidden_page;
++	file_t *hidden_file = NULL;
++	loff_t pos;
++	unsigned bytes = to - from;
++	unsigned hidden_from, hidden_to, hidden_bytes;
++
++	print_entry_location();
++
++	inode = page->mapping->host; /* CPW: Moved below print_entry_location */
++	hidden_inode = itohi(inode);
++
++	ASSERT(file != NULL);
++	/*
++	 * here we have a kmapped page, with data from the user copied
++	 * into it.  we need to encode_block it, and then call the lower
++	 * commit_write.  We also need to simulate same behavior of
++	 * generic_file_write, and call prepare_write on the lower f/s first.
++	 */
++#ifdef FIST_COUNT_WRITES
++	count_writes++;
++# endif /* FIST_COUNT_WRITES */
++
++	/* this is append and/or extend -- we can't have holes so fill them in */
++	if (page->index > (hidden_inode->i_size >> PAGE_CACHE_SHIFT)) {
++		page_t *tmp_page;
++		int index;
++		for (index = hidden_inode->i_size >> PAGE_CACHE_SHIFT; index < page->index; index++) {
++			tmp_page = mini_fo_get1page(file, index);
++			if (IS_ERR(tmp_page)) {
++				err = PTR_ERR(tmp_page);
++				goto out;
++			}
++			/* zero out the contents of the page at the appropriate offsets */
++			memset((char*)page_address(tmp_page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, PAGE_CACHE_SIZE - (inode->i_size & ~PAGE_CACHE_MASK));
++			if (!(err = mini_fo_prepare_write(file, tmp_page, 0, PAGE_CACHE_SIZE)))
++				err = mini_fo_commit_write(file, tmp_page, 0, PAGE_CACHE_SIZE);
++			page_cache_release(tmp_page);
++			if (err < 0)
++				goto out;
++			if (current->need_resched)
++				schedule();
++		}
++	}
++
++	if (ftopd(file) != NULL)
++		hidden_file = ftohf(file);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_inode->i_mutex);
++#else
++	down(&hidden_inode->i_sem);
++#endif
++	/* find lower page (returns a locked page) */
++	hidden_page = grab_cache_page(hidden_inode->i_mapping, page->index);
++	if (!hidden_page)
++		goto out;
++
++#if FIST_ENCODING_BLOCKSIZE > 1
++#  error encoding_blocksize greater than 1 is not yet supported
++# endif /* FIST_ENCODING_BLOCKSIZE > 1 */
++
++	hidden_from = from & (~(FIST_ENCODING_BLOCKSIZE - 1));
++	hidden_to = ((to + FIST_ENCODING_BLOCKSIZE - 1) & (~(FIST_ENCODING_BLOCKSIZE - 1)));
++	if ((page->index << PAGE_CACHE_SHIFT) + to > hidden_inode->i_size) {
++
++		/*
++		 * if this call to commit_write had introduced holes and the code
++		 * for handling holes was invoked, then the beginning of this page
++		 * must be zeroed out
++		 * zero out bytes from 'size_of_file%pagesize' to 'from'.
++		 */
++		if ((hidden_from - (inode->i_size & ~PAGE_CACHE_MASK)) > 0)
++			memset((char*)page_address(page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, hidden_from - (inode->i_size & ~PAGE_CACHE_MASK));
++
++	}
++	hidden_bytes = hidden_to - hidden_from;
++
++	/* call lower prepare_write */
++	err = -EINVAL;
++	if (hidden_inode->i_mapping &&
++	    hidden_inode->i_mapping->a_ops &&
++	    hidden_inode->i_mapping->a_ops->prepare_write)
++		err = hidden_inode->i_mapping->a_ops->prepare_write(hidden_file,
++								    hidden_page,
++								    hidden_from,
++								    hidden_to);
++	if (err)
++		/* don't leave locked pages behind, esp. on an ENOSPC */
++		goto out_unlock;
++
++	fist_dprint(8, "%s: encoding %d bytes\n", __FUNCTION__, hidden_bytes);
++	mini_fo_encode_block((char *) page_address(page) + hidden_from, (char*) page_address(hidden_page) + hidden_from, hidden_bytes, inode, inode->i_sb, page->index);
++	/* if encode_block could fail, then goto unlock and return error */
++
++	/* call lower commit_write */
++	err = hidden_inode->i_mapping->a_ops->commit_write(hidden_file,
++							   hidden_page,
++							   hidden_from,
++							   hidden_to);
++
++	if (err < 0)
++		goto out_unlock;
++
++	err = bytes;	/* convert error to no. of bytes */
++
++	inode->i_blocks = hidden_inode->i_blocks;
++	/* we may have to update i_size */
++	pos = (page->index << PAGE_CACHE_SHIFT) + to;
++	if (pos > inode->i_size)
++		inode->i_size = pos;
++
++	/*
++	 * update mtime and ctime of lower level file system
++	 * mini_fo' mtime and ctime are updated by generic_file_write
++	 */
++	hidden_inode->i_mtime = hidden_inode->i_ctime = CURRENT_TIME;
++
++	mark_inode_dirty_sync(inode);
++
++ out_unlock:
++	UnlockPage(hidden_page);
++	page_cache_release(hidden_page);
++	kunmap(page);		/* kmap was done in prepare_write */
++ out:
++	/* we must set our page as up-to-date */
++	if (err < 0)
++		ClearPageUptodate(page);
++	else
++		SetPageUptodate(page);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_inode->i_mutex);
++#else
++	up(&hidden_inode->i_sem);
++#endif
++	print_exit_status(err);
++	return err;			/* assume all is ok */
++}
++
++
++STATIC int
++mini_fo_bmap(struct address_space *mapping, long block)
++{
++	int err = 0;
++	inode_t *inode;
++	inode_t *hidden_inode;
++
++	print_entry_location();
++
++	inode = (inode_t *) mapping->host;
++	hidden_inode = itohi(inode);
++
++	if (hidden_inode->i_mapping->a_ops->bmap)
++		err = hidden_inode->i_mapping->a_ops->bmap(hidden_inode->i_mapping, block);
++	print_exit_location();
++	return err;
++}
++
++
++/*
++ * This function is copied verbatim from mm/filemap.c.
++ * XXX: It should be simply moved to some header file instead -- bug Al about it!
++ */
++static inline int sync_page(struct page *page)
++{
++	struct address_space *mapping = page->mapping;
++
++	if (mapping && mapping->a_ops && mapping->a_ops->sync_page)
++		return mapping->a_ops->sync_page(page);
++	return 0;
++}
++
++
++/*
++ * XXX: we may not need this function if not FIST_FILTER_DATA.
++ * FIXME: for FIST_FILTER_SCA, get all lower pages and sync them each.
++ */
++STATIC int
++mini_fo_sync_page(page_t *page)
++{
++	int err = 0;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	page_t *hidden_page;
++
++	print_entry_location();
++
++	inode = page->mapping->host; /* CPW: Moved below print_entry_location */
++	hidden_inode = itohi(inode);
++
++	/* find lower page (returns a locked page) */
++	hidden_page = grab_cache_page(hidden_inode->i_mapping, page->index);
++	if (!hidden_page)
++		goto out;
++
++	err = sync_page(hidden_page);
++
++	UnlockPage(hidden_page);	/* b/c grab_cache_page locked it */
++	page_cache_release(hidden_page); /* b/c grab_cache_page increased refcnt */
++
++ out:
++	print_exit_status(err);
++	return err;
++}
+--- /dev/null
++++ b/fs/mini_fo/README
+@@ -0,0 +1,163 @@
++README for the mini_fo overlay file system
++=========================================
++
++
++WHAT IS MINI_FO?
++----------------
++
++mini_fo is a virtual kernel file system that can make read-only
++file systems writable. This is done by redirecting modifying operations
++to a writeable location called "storage directory", and leaving the
++original data in the "base directory" untouched. When reading, the
++file system merges the modifed and original data so that only the
++newest versions will appear. This occurs transparently to the user,
++who can access the data like on any other read-write file system.
++
++Base and storage directories may be located on the same or on
++different partitions and may be of different file system types. While
++the storage directory obviously needs to be writable, the base may or
++may not be writable, what doesn't matter as it will no be modified
++anyway.
++
++
++WHAT IS GOOD FOR?
++-----------------
++
++The primary purpose of the mini_fo file system is to allow easy
++software updates to embedded systems, that often store their root
++file system in a read-only flash file system, but there are many
++more as for example sandboxing, or for allowing live-cds to
++permanently store information.
++
++
++BUILDING
++--------
++This should be simple. Adjust the Makefile to point to the correct
++kernel headers you want to build the module for. Then:
++
++    # make
++
++should build "mini_fo.o" for a 2.4 kernel or "mini_fo.ko" for a 2.6
++kernel.
++
++If you are building the module for you current kernel, you can install
++the module (as root):
++
++    # make install
++
++or uninstall with
++
++    # make uninstall
++
++
++USING THE FILE SYSTEM
++--------------------
++
++the general mount syntax is:
++
++   mount -t mini_fo -o base=<base directory>,sto=<storage directory>\
++                            <base directory> <mount point>
++
++Example:
++
++You have mounted a cdrom to /mnt/cdrom and want to modifiy some files
++on it:
++
++load the module (as root)
++
++    # insmod mini_fo.o for a 2.4 kernel or
++
++    # insmod mini_fo.ko for a 2.6 kernel
++
++
++create a storage dir in tmp and a mountpoint for mini_fo:
++
++    # mkdir /tmp/sto
++    # mkdir /mnt/mini_fo
++
++and mount the mini_fo file system:
++
++    # mount -t mini_fo -o base=/mnt/cdrom,sto=/tmp/sto /mnt/cdrom /mnt/mini_fo
++
++
++Now the data stored on the cd can be accessed via the mini_fo
++mountpoint just like any read-write file system, files can be modified
++and deleted, new ones can be created and so on. When done unmount the
++file system:
++
++    # unmount /mnt/mini_fo
++
++Note that if the file system is mounted again using the same storage
++file system, of course it will appear in the modified state again. If
++you remount it using an new empty storage directory, it will be
++unmodified. Therefore by executing:
++
++    # cd /tmp/sto
++    # rm -rf *
++
++you can nuke all the changes you made to the original file system. But
++ remember NEVER do this while the mini_fo file system is mounted!
++
++
++Alternatively you can use the mini_fo-overlay bash script, that
++simplifies managing mini_fo mounts. See TOOLS Section.
++
++
++TOOLS
++-----
++
++mini_fo-merge (experimental):
++
++This is a bash script that will merge changes contained in the storage
++directory back to the base directory. This allows mini_fo to function
++as a cache file system by overlaying a slow (network, ...) file system
++and using a fast (ramdisk, ...) as storage. When done, changes can be
++merged back to the (slow) base with mini_fo-merge. See "mini_fo-merge
++-h" for details.
++
++It can be usefull for merging changes back after a successfull test
++(patches, software updates...)
++
++
++mini_fo-overlay:
++
++This bash script simplifies managing one or more mini_fo mounts. For
++overlaying a directory called "basedir1", you can just call:
++
++    # mini_fo-overlay basedir1
++
++This will mount mini_fo with "basedir1" as base, "/tmp/sto-basedir1/"
++as storage to "/mnt/mini_fo-basedir1/". It has more options though,
++type "mini_fo-overlay -h" for details.
++
++
++DOCUMENTATION, REPORTING BUGS, GETTING HELP
++-------------------------------------------
++
++Please visit the mini_fo project page at:
++
++http://www.denx.de/twiki/bin/view/Know/MiniFOHome
++
++
++WARNINGS
++--------
++
++Never modify the base or the storage directorys while the mini_fo
++file system is mounted, or you might crash you system. Simply accessing
++and reading should not cause any trouble.
++
++Exporting a mini_fo mount point via NFS has not been tested, and may
++or may not work.
++
++Check the RELEASE_NOTES for details on bugs and features.
++
++
++
++Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++
++This program is free software; you can redistribute it and/or
++modify it under the terms of the GNU General Public License
++as published by the Free Software Foundation; either version
++2 of the License, or (at your option) any later version.
++
++
+--- /dev/null
++++ b/fs/mini_fo/RELEASE_NOTES
+@@ -0,0 +1,111 @@
++Release:	mini_fo-0.6.1 (v0-6-1)
++Date:		21.09.2005
++
++
++Changes:
++--------
++v0-6-1:
++
++- bugfixes (see ChangeLog)
++
++- two helper scripts "mini_fo_merge" and "mini_fo_overlay" (see
++  README for details).
++
++v0-6-0:
++
++- Support for 2.4 and 2.6 (see Makefile)
++
++- Partial hard link support (creating works as expected, but already
++  existing links in the base file system will be treated as if they
++  were individual files).
++
++- Various bugfixes and cleanups.
++
++
++v0-6-0-pre1:
++
++- This is mini_fo-0-6-0-pre1! This release is a complete rewrite of
++  many vital mini_fo parts such as the old whiteout list code which
++  has been replaced by the new META subsystem.
++
++- Light weight directory renaming implemented. This means if a
++  directory is renamed via the mini_fo filesystem this will no longer
++  result in a complete copy in storage, instead only one empty
++  directory will be created. All base filed contained in the original
++  directory stay there until modified.
++
++- Special files (creating, renaming, deleting etc.) now working.
++
++- Many bugfixes and cleanup, mini_fo is now a lot more stable.
++
++
++v0-5-10:
++
++- Final release of the 0-5-* versions. Next will be a complete rewrite
++  of many features. This release contains several bugfixes related to
++  directory renaming.
++
++
++v0-5-10-pre6:
++
++- Lots of cleanup and several bugfixes related to directory deleting
++
++- Directory renaming suddenly works, what is most likely due to the
++  fact tha that "mv" is smart: if the classic rename doesn't work it
++  will assume that source and target file are on different fs and will
++  copy the directory and try to remove the source directory. Until
++  directory removing wasn't implemented, it would fail to do this and
++  rollback.
++  So, directory renaming works for now, but it doesn't yet do what you
++  would expect from a overlay fs, so use with care.
++
++
++v0-5-10-pre5:
++
++- implemented directory deleting
++- made parsing of mount options more stable
++- New format of mount options! (See README)
++- I can't reproduce the unknown panic with 2.4.25 anymore, so I'll
++  happily assume it never existed!
++
++
++Implemented features:
++---------------------
++
++- creating hard links (see BUGS on already existing hard links)
++- lightweight directory renaming
++- renaming device files, pipes, sockets, etc.
++- creating, renaming, deleting of special files
++- deleting directorys
++- general directory reading (simple "ls" )
++- creating files in existing directorys
++- creating directorys
++- renaming files.
++- reading and writing files (involves opening)
++- appending to files (creates copy in storage)
++- deleting files
++- llseek works too, what allows editors to work
++- persistency (a deleted file stay deleted over remounts)
++- use of symbolic links
++- creating of device files
++
++
++Not (yet) implemented features:
++-------------------------------
++
++- full hard link support.
++
++
++
++BUGS:
++-----
++
++Hard links in the base file system will be treated as individual
++files, not as links to one inode.
++
++The main problem with hard links isn't allowing to create them, but
++their pure existence. If you modify a base hard link, the changes made
++will only show up on this link, the other link will remain in the
++original state. I hope to fix this someday. Please note that this does
++not effect the special hard links '.' and '..', that are handled
++seperately by the lower fs.
+--- /dev/null
++++ b/fs/mini_fo/state.c
+@@ -0,0 +1,620 @@
++/*
++ * Copyright (C) 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif /* HAVE_CONFIG_H */
++
++#include "fist.h"
++#include "mini_fo.h"
++
++
++/* create the storage file, setup new states */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++int create_sto_reg_file(dentry_t *dentry, int mode, struct nameidata *nd)
++#else
++int create_sto_reg_file(dentry_t *dentry, int mode)
++#endif
++{
++	int err = 0;
++	inode_t *dir;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++
++	if(exists_in_storage(dentry)) {
++		printk(KERN_CRIT "mini_fo: create_sto_file: wrong type or state.\n");
++		err = -EINVAL;
++		goto out;
++	}
++	err = get_neg_sto_dentry(dentry);
++
++	if (err) {
++		printk(KERN_CRIT "mini_fo: create_sto_file: ERROR getting neg. sto dentry.\n");
++		goto out;
++	}
++
++	dir = dentry->d_parent->d_inode;
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* lock parent */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++        down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = PTR_ERR(hidden_sto_dir_dentry);
++        if (IS_ERR(hidden_sto_dir_dentry))
++                goto out;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	err = vfs_create(hidden_sto_dir_dentry->d_inode,
++			 hidden_sto_dentry,
++			 mode, nd);
++#else
++	err = vfs_create(hidden_sto_dir_dentry->d_inode,
++			 hidden_sto_dentry,
++			 mode);
++#endif
++        if(err) {
++		printk(KERN_CRIT "mini_fo: create_sto_file: ERROR creating sto file.\n");
++                goto out_lock;
++	}
++
++	if(!dtohd2(dentry)->d_inode) {
++		printk(KERN_CRIT "mini_fo: create_sto_file: ERROR creating sto file [2].\n");
++                err = -EINVAL;
++                goto out_lock;
++        }
++
++        /* interpose the new inode */
++        if(dtost(dentry) == DELETED) {
++                dtost(dentry) = DEL_REWRITTEN;
++                err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0);
++                if(err)
++                        goto out_lock;
++        }
++        else if(dtost(dentry) == NON_EXISTANT) {
++                dtost(dentry) = CREATED;
++                err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0);
++                if(err)
++                        goto out_lock;
++        }
++        else if(dtost(dentry) == UNMODIFIED) {
++                dtost(dentry) = MODIFIED;
++                /* interpose on new inode */
++                if(itohi2(dentry->d_inode) != NULL) {
++                        printk(KERN_CRIT "mini_fo: create_sto_file: invalid inode detected.\n");
++                        err = -EINVAL;
++                        goto out_lock;
++                }
++                itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++	}
++	fist_copy_attr_timesizes(dentry->d_parent->d_inode,
++				 hidden_sto_dir_dentry->d_inode);
++
++ out_lock:
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++        dput(hidden_sto_dir_dentry);
++ out:
++	return err;
++}
++
++/* create the sto dir, setup states */
++int create_sto_dir(dentry_t *dentry, int mode)
++{
++	int err = 0;
++	inode_t *dir;
++	dentry_t *hidden_sto_dentry;
++        dentry_t *hidden_sto_dir_dentry;
++
++	/* had to take the "!S_ISDIR(mode))" check out, because it failed */
++	if(exists_in_storage(dentry)) {
++                printk(KERN_CRIT "mini_fo: create_sto_dir: wrong type or state.\\
++n");
++                err = -EINVAL;
++                goto out;
++        }
++
++	err = get_neg_sto_dentry(dentry);
++	if(err) {
++		err = -EINVAL;
++		goto out;
++	}
++
++	dir = dentry->d_parent->d_inode;
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = PTR_ERR(hidden_sto_dir_dentry);
++	if (IS_ERR(hidden_sto_dir_dentry))
++		goto out;
++
++	err = vfs_mkdir(hidden_sto_dir_dentry->d_inode,
++			hidden_sto_dentry,
++			mode);
++	if(err) {
++		printk(KERN_CRIT "mini_fo: create_sto_dir: ERROR creating sto dir.\n");
++		goto out_lock;
++	}
++
++	if(!dtohd2(dentry)->d_inode) {
++		printk(KERN_CRIT "mini_fo: create_sto_dir: ERROR creating sto dir [2].\n");
++		err = -EINVAL;
++		goto out_lock;
++	}
++
++	/* interpose the new inode */
++	if(dtost(dentry) == DELETED) {
++		dtost(dentry) = DEL_REWRITTEN;
++		err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0);
++		if(err)
++			goto out_lock;
++	}
++	else if(dtopd(dentry)->state == NON_EXISTANT) {
++		dtopd(dentry)->state = CREATED;
++		err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0);
++		if(err)
++			goto out_lock;
++	}
++	else if(dtopd(dentry)->state == UNMODIFIED) {
++		dtopd(dentry)->state = MODIFIED;
++		/* interpose on new inode */
++		if(itohi2(dentry->d_inode) != NULL) {
++			printk(KERN_CRIT "mini_fo:  create_sto_dir: ERROR, invalid inode detected.\n");
++			err = -EINVAL;
++			goto out_lock;
++		}
++		itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++	}
++
++	fist_copy_attr_timesizes(dir, hidden_sto_dir_dentry->d_inode);
++
++	/* initalize the wol list */
++	itopd(dentry->d_inode)->deleted_list_size = -1;
++	itopd(dentry->d_inode)->renamed_list_size = -1;
++	meta_build_lists(dentry);
++
++
++ out_lock:
++	/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++ out:
++	return err;
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++int create_sto_nod(dentry_t *dentry, int mode, dev_t dev)
++#else
++int create_sto_nod(dentry_t *dentry, int mode, int dev)
++#endif
++{
++	int err = 0;
++	inode_t *dir;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++
++	if(exists_in_storage(dentry)) {
++		err = -EEXIST;
++		goto out;
++	}
++	err = get_neg_sto_dentry(dentry);
++
++	if (err) {
++                printk(KERN_CRIT "mini_fo: create_sto_nod: ERROR getting neg. sto dentry.\n");
++                goto out;
++        }
++
++	dir = dentry->d_parent->d_inode;
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* lock parent */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = PTR_ERR(hidden_sto_dir_dentry);
++	if (IS_ERR(hidden_sto_dir_dentry))
++		goto out;
++
++	err = vfs_mknod(hidden_sto_dir_dentry->d_inode, hidden_sto_dentry, mode, dev);
++	if(err)
++		goto out_lock;
++
++	if(!dtohd2(dentry)->d_inode) {
++		printk(KERN_CRIT "mini_fo: create_sto_nod: creating storage inode failed [1].\n");
++		err = -EINVAL; /* return something indicating failure */
++		goto out_lock;
++	}
++
++	/* interpose the new inode */
++	if(dtost(dentry) == DELETED) {
++		dtost(dentry) = DEL_REWRITTEN;
++		err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0);
++		if(err)
++			goto out_lock;
++	}
++	else if(dtost(dentry) == NON_EXISTANT) {
++		dtost(dentry) = CREATED;
++		err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0);
++		if(err)
++			goto out_lock;
++	}
++	else if(dtost(dentry) == UNMODIFIED) {
++		dtost(dentry) = MODIFIED;
++		/* interpose on new inode */
++		if(itohi2(dentry->d_inode) != NULL) {
++			printk(KERN_CRIT "mini_fo: create_sto_nod: error, invalid inode detected.\n");
++			err = -EINVAL;
++			goto out_lock;
++		}
++		itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++	}
++
++	fist_copy_attr_timesizes(dir, hidden_sto_dir_dentry->d_inode);
++
++ out_lock:
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++ out:
++	return err;
++}
++
++
++/* unimplemented (and possibly not usefull):
++
++   nondir-del_to_del_rew
++   nondir-non_exist_to_creat
++
++   dir-unmod_to_del
++   dir-mod_to_del
++   dir-creat_to_del
++   dir-del_rew_to_del
++   dir-del_to_del_rew
++   dir-non_exist_to_creat
++*/
++
++
++/* bring a file of any type from state UNMODIFIED to MODIFIED */
++int nondir_unmod_to_mod(dentry_t *dentry, int cp_flag)
++{
++	int err = 0;
++	struct vfsmount *tgt_mnt;
++	struct vfsmount *src_mnt;
++	dentry_t *tgt_dentry;
++	dentry_t *src_dentry;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++
++	check_mini_fo_dentry(dentry);
++
++	if((dtost(dentry) != UNMODIFIED) ||
++	   S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++	err = get_neg_sto_dentry(dentry);
++
++	if (err) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                  ERROR getting neg. sto dentry.\n");
++		goto out;
++	}
++
++	/* create sto file */
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* lock parent */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++        down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = PTR_ERR(hidden_sto_dir_dentry);
++        if (IS_ERR(hidden_sto_dir_dentry))
++                goto out;
++
++	/* handle different types of nondirs */
++	if(S_ISCHR(dentry->d_inode->i_mode) ||
++	   S_ISBLK(dentry->d_inode->i_mode)) {
++		err = vfs_mknod(hidden_sto_dir_dentry->d_inode,
++				hidden_sto_dentry,
++				dtohd(dentry)->d_inode->i_mode,
++				dtohd(dentry)->d_inode->i_rdev);
++	}
++
++	else if(S_ISREG(dentry->d_inode->i_mode)) {
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		err = vfs_create(hidden_sto_dir_dentry->d_inode,
++				 hidden_sto_dentry,
++				 dtohd(dentry)->d_inode->i_mode, NULL);
++#else
++		err = vfs_create(hidden_sto_dir_dentry->d_inode,
++				 hidden_sto_dentry,
++				 dtohd(dentry)->d_inode->i_mode);
++#endif
++	}
++        if(err) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                  ERROR creating sto file.\n");
++                goto out_lock;
++	}
++
++	/* interpose on new inode */
++	if(itohi2(dentry->d_inode) != NULL) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                  ERROR, invalid inode detected.\n");
++		err = -EINVAL;
++		goto out_lock;
++	}
++
++	itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++
++        fist_copy_attr_timesizes(dentry->d_parent->d_inode,
++				 hidden_sto_dir_dentry->d_inode);
++	dtost(dentry) = MODIFIED;
++
++	/* copy contents if regular file and cp_flag = 1 */
++	if((cp_flag == 1) && S_ISREG(dentry->d_inode->i_mode)) {
++
++		/* unlock first */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++		dput(hidden_sto_dir_dentry);
++
++		tgt_dentry = dtohd2(dentry);
++		tgt_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++		src_dentry = dtohd(dentry);
++		src_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt;
++
++		err = mini_fo_cp_cont(tgt_dentry, tgt_mnt,
++				      src_dentry, src_mnt);
++		if(err) {
++			printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                          ERROR copying contents.\n");
++		}
++		goto out;
++	}
++
++ out_lock:
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++        dput(hidden_sto_dir_dentry);
++ out:
++	return err;
++}
++
++/* this function is currently identical to nondir_creat_to_del */
++int nondir_del_rew_to_del(dentry_t *dentry)
++{
++	return nondir_creat_to_del(dentry);
++}
++
++int nondir_creat_to_del(dentry_t *dentry)
++{
++	int err = 0;
++
++	inode_t *hidden_sto_dir_inode;
++	dentry_t *hidden_sto_dir_dentry;
++	dentry_t *hidden_sto_dentry;
++
++	check_mini_fo_dentry(dentry);
++
++	/* for now this function serves for both state DEL_REWRITTEN and
++	 * CREATED */
++	if(!(dtost(dentry) == CREATED || (dtost(dentry) == DEL_REWRITTEN)) ||
++	   S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: nondir_mod_to_del/del_rew_to_del: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++
++	hidden_sto_dir_inode = itohi2(dentry->d_parent->d_inode);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry);*/
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	/* avoid destroying the hidden inode if the file is in use */
++	dget(hidden_sto_dentry);
++	err = vfs_unlink(hidden_sto_dir_inode, hidden_sto_dentry);
++	dput(hidden_sto_dentry);
++	if(!err)
++		d_delete(hidden_sto_dentry);
++
++	/* propagate number of hard-links */
++	dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++
++	dtost(dentry) = NON_EXISTANT;
++
++	/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++
++ out:
++	return err;
++}
++
++int nondir_mod_to_del(dentry_t *dentry)
++{
++	int err;
++	dentry_t *hidden_sto_dentry;
++	inode_t *hidden_sto_dir_inode;
++	dentry_t *hidden_sto_dir_dentry;
++
++	check_mini_fo_dentry(dentry);
++
++	if(dtost(dentry) != MODIFIED ||
++	   S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: nondir_mod_to_del: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++
++	hidden_sto_dir_inode = itohi2(dentry->d_parent->d_inode);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* was hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	/* avoid destroying the hidden inode if the file is in use */
++	dget(hidden_sto_dentry);
++	err = vfs_unlink(hidden_sto_dir_inode, hidden_sto_dentry);
++	dput(hidden_sto_dentry);
++	if(!err)
++		d_delete(hidden_sto_dentry);
++
++	/* propagate number of hard-links */
++	dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++
++	/* dput base dentry, this will relase the inode and free the
++	 * dentry, as we will never need it again. */
++	dput(dtohd(dentry));
++	dtohd(dentry) = NULL;
++	dtost(dentry) = DELETED;
++
++	/* add deleted file to META-file */
++	meta_add_d_entry(dentry->d_parent,
++			 dentry->d_name.name,
++			 dentry->d_name.len);
++
++	/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++
++ out:
++	return err;
++}
++
++int nondir_unmod_to_del(dentry_t *dentry)
++{
++	int err = 0;
++
++	check_mini_fo_dentry(dentry);
++
++	if(dtost(dentry) != UNMODIFIED ||
++	   S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_del: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++
++	 /* next we have to get a negative dentry for the storage file */
++	err = get_neg_sto_dentry(dentry);
++
++	if(err)
++		goto out;
++
++	/* add deleted file to META lists */
++	err = meta_add_d_entry(dentry->d_parent,
++			       dentry->d_name.name,
++			       dentry->d_name.len);
++
++	if(err)
++		goto out;
++
++	/* dput base dentry, this will relase the inode and free the
++	 * dentry, as we will never need it again. */
++	dput(dtohd(dentry));
++	dtohd(dentry) = NULL;
++	dtost(dentry) = DELETED;
++
++ out:
++	return err;
++}
++
++/* bring a dir from state UNMODIFIED to MODIFIED */
++int dir_unmod_to_mod(dentry_t *dentry)
++{
++	int err;
++
++	check_mini_fo_dentry(dentry);
++
++	if(dtost(dentry) != UNMODIFIED ||
++	   !S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: dir_unmod_to_mod: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++
++	/* this creates our dir incl. sto. structure */
++	err = build_sto_structure(dentry->d_parent, dentry);
++	if(err) {
++		printk(KERN_CRIT "mini_fo: dir_unmod_to_mod: \
++                                  build_sto_structure failed.\n");
++		goto out;
++	}
++ out:
++	return err;
++}
++
+--- /dev/null
++++ b/fs/mini_fo/super.c
+@@ -0,0 +1,281 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++
++
++STATIC void
++mini_fo_read_inode(inode_t *inode)
++{
++	static struct address_space_operations mini_fo_empty_aops;
++
++	__itopd(inode) = kmalloc(sizeof(struct mini_fo_inode_info), GFP_KERNEL);
++	if (!itopd(inode)) {
++		printk("<0>%s:%s:%d: No kernel memory!\n", __FILE__, __FUNCTION__, __LINE__);
++		ASSERT(NULL);
++	}
++	itohi(inode) = NULL;
++	itohi2(inode) = NULL;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	inode->i_version++;
++#else
++	inode->i_version = ++event;	/* increment inode version */
++#endif
++	inode->i_op = &mini_fo_main_iops;
++	inode->i_fop = &mini_fo_main_fops;
++#if 0
++	/*
++	 * XXX: To export a file system via NFS, it has to have the
++	 * FS_REQUIRES_DEV flag, so turn it on.  But should we inherit it from
++	 * the lower file system, or can we allow our file system to be exported
++	 * even if the lower one cannot be natively exported.
++	 */
++	inode->i_sb->s_type->fs_flags |= FS_REQUIRES_DEV;
++	/*
++	 * OK, the above was a hack, which is now turned off because it may
++	 * cause a panic/oops on some systems.  The correct way to export a
++	 * "nodev" filesystem is via using nfs-utils > 1.0 and the "fsid=" export
++	 * parameter, which requires 2.4.20 or later.
++	 */
++#endif
++	/* I don't think ->a_ops is ever allowed to be NULL */
++	inode->i_mapping->a_ops = &mini_fo_empty_aops;
++}
++
++
++#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
++/*
++ * No need to call write_inode() on the lower inode, as it
++ * will have been marked 'dirty' anyway. But we might need
++ * to write some of our own stuff to disk.
++ */
++STATIC void
++mini_fo_write_inode(inode_t *inode, int sync)
++{
++	print_entry_location();
++	print_exit_location();
++}
++#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++
++
++STATIC void
++mini_fo_put_inode(inode_t *inode)
++{
++	/*
++	 * This is really funky stuff:
++	 * Basically, if i_count == 1, iput will then decrement it and this inode will be destroyed.
++	 * It is currently holding a reference to the hidden inode.
++	 * Therefore, it needs to release that reference by calling iput on the hidden inode.
++	 * iput() _will_ do it for us (by calling our clear_inode), but _only_ if i_nlink == 0.
++	 * The problem is, NFS keeps i_nlink == 1 for silly_rename'd files.
++	 * So we must for our i_nlink to 0 here to trick iput() into calling our clear_inode.
++	 */
++	if (atomic_read(&inode->i_count) == 1)
++		inode->i_nlink = 0;
++}
++
++
++#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
++/*
++ * we now define delete_inode, because there are two VFS paths that may
++ * destroy an inode: one of them calls clear inode before doing everything
++ * else that's needed, and the other is fine.  This way we truncate the inode
++ * size (and its pages) and then clear our own inode, which will do an iput
++ * on our and the lower inode.
++ */
++STATIC void
++mini_fo_delete_inode(inode_t *inode)
++{
++	print_entry_location();
++
++	fist_checkinode(inode, "mini_fo_delete_inode IN");
++	inode->i_size = 0;		/* every f/s seems to do that */
++	clear_inode(inode);
++
++	print_exit_location();
++}
++#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++
++
++/* final actions when unmounting a file system */
++STATIC void
++mini_fo_put_super(super_block_t *sb)
++{
++	if (stopd(sb)) {
++		mntput(stopd(sb)->hidden_mnt);
++		mntput(stopd(sb)->hidden_mnt2);
++
++		/* mk: no! dput(stopd(sb)->base_dir_dentry);
++		   dput(stopd(sb)->storage_dir_dentry); */
++
++		kfree(stopd(sb));
++		__stopd(sb) = NULL;
++	}
++}
++
++
++#ifdef NOT_NEEDED
++/*
++ * This is called in do_umount before put_super.
++ * The superblock lock is not held yet.
++ * We probably do not need to define this or call write_super
++ * on the hidden_sb, because sync_supers() will get to hidden_sb
++ * sooner or later.  But it is also called from file_fsync()...
++ */
++STATIC void
++mini_fo_write_super(super_block_t *sb)
++{
++	return;
++}
++#endif /* NOT_NEEDED */
++
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++mini_fo_statfs(struct dentry *d, struct kstatfs *buf)
++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_statfs(super_block_t *sb, struct kstatfs *buf)
++#else
++mini_fo_statfs(super_block_t *sb, struct statfs *buf)
++#endif
++{
++	int err = 0;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++	struct dentry *hidden_d;
++
++	hidden_d = dtohd(d);
++	err = vfs_statfs(hidden_d, buf);
++#else
++	super_block_t *hidden_sb;
++
++	hidden_sb = stohs(sb);
++	err = vfs_statfs(hidden_sb, buf);
++#endif
++
++	return err;
++}
++
++
++/*
++ * XXX: not implemented.  This is not allowed yet.
++ * Should we call this on the hidden_sb?  Probably not.
++ */
++STATIC int
++mini_fo_remount_fs(super_block_t *sb, int *flags, char *data)
++{
++	//printk(KERN_CRIT "mini_fo_remount_fs: WARNING, this function is umimplemented.\n");
++	return -ENOSYS;
++}
++
++
++/*
++ * Called by iput() when the inode reference count reached zero
++ * and the inode is not hashed anywhere.  Used to clear anything
++ * that needs to be, before the inode is completely destroyed and put
++ * on the inode free list.
++ */
++STATIC void
++mini_fo_clear_inode(inode_t *inode)
++{
++	/*
++	 * Decrement a reference to a hidden_inode, which was incremented
++	 * by our read_inode when it was created initially.
++	 */
++
++	/* release the wol_list */
++	if(S_ISDIR(inode->i_mode)) {
++		__meta_put_lists(inode);
++	}
++
++	/* mk: fan out fun */
++	if(itohi(inode))
++		iput(itohi(inode));
++	if(itohi2(inode))
++		iput(itohi2(inode));
++
++	// XXX: why this assertion fails?
++	// because it doesn't like us
++	// ASSERT((inode->i_state & I_DIRTY) == 0);
++	kfree(itopd(inode));
++	__itopd(inode) = NULL;
++}
++
++
++/*
++ * Called in do_umount() if the MNT_FORCE flag was used and this
++ * function is defined.  See comment in linux/fs/super.c:do_umount().
++ * Used only in nfs, to kill any pending RPC tasks, so that subsequent
++ * code can actually succeed and won't leave tasks that need handling.
++ *
++ * PS. I wonder if this is somehow useful to undo damage that was
++ * left in the kernel after a user level file server (such as amd)
++ * dies.
++ */
++STATIC void
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++mini_fo_umount_begin(struct vfsmount *mnt, int flags)
++{
++	struct vfsmount *hidden_mnt;
++
++	hidden_mnt = stopd(mnt->mnt_sb)->hidden_mnt;
++
++	if (hidden_mnt->mnt_sb->s_op->umount_begin)
++		hidden_mnt->mnt_sb->s_op->umount_begin(hidden_mnt, flags);
++
++}
++#else
++mini_fo_umount_begin(super_block_t *sb)
++{
++	super_block_t *hidden_sb;
++
++	hidden_sb = stohs(sb);
++
++	if (hidden_sb->s_op->umount_begin)
++		hidden_sb->s_op->umount_begin(hidden_sb);
++
++}
++#endif
++
++
++struct super_operations mini_fo_sops =
++{
++	read_inode:		mini_fo_read_inode,
++#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
++	write_inode:	mini_fo_write_inode,
++#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++	put_inode:		mini_fo_put_inode,
++#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
++	delete_inode:	mini_fo_delete_inode,
++#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++	put_super:		mini_fo_put_super,
++	statfs:		mini_fo_statfs,
++	remount_fs:		mini_fo_remount_fs,
++	clear_inode:	mini_fo_clear_inode,
++	umount_begin:	mini_fo_umount_begin,
++};
+--- /dev/null
++++ b/fs/mini_fo/Kconfig
+@@ -0,0 +1,3 @@
++config MINI_FO
++	tristate "Mini fanout overlay filesystem"
++
diff --git a/target/linux/generic/patches-2.6.34/210-mini_fo_2.6.25_fixes.patch b/target/linux/generic/patches-2.6.34/210-mini_fo_2.6.25_fixes.patch
new file mode 100644
index 0000000000..b64630d500
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/210-mini_fo_2.6.25_fixes.patch
@@ -0,0 +1,143 @@
+--- a/fs/mini_fo/main.c
++++ b/fs/mini_fo/main.c
+@@ -79,6 +79,7 @@ mini_fo_tri_interpose(dentry_t *hidden_d
+ 	 * of the new inode's fields
+ 	 */
+ 
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,25)
+ 	/*
+ 	 * original: inode = iget(sb, hidden_inode->i_ino);
+ 	 */
+@@ -87,6 +88,13 @@ mini_fo_tri_interpose(dentry_t *hidden_d
+ 		err = -EACCES;		/* should be impossible??? */
+ 		goto out;
+ 	}
++#else
++	inode = mini_fo_iget(sb, iunique(sb, 25));
++	if (IS_ERR(inode)) {
++		err = PTR_ERR(inode);
++		goto out;
++	}
++#endif
+ 
+ 	/*
+ 	 * interpose the inode if not already interposed
+@@ -184,9 +192,9 @@ mini_fo_parse_options(super_block_t *sb,
+ 				hidden_root = ERR_PTR(err);
+ 				goto out;
+ 			}
+-			hidden_root = nd.dentry;
+-			stopd(sb)->base_dir_dentry = nd.dentry;
+-			stopd(sb)->hidden_mnt = nd.mnt;
++			hidden_root = nd_get_dentry(&nd);
++			stopd(sb)->base_dir_dentry = nd_get_dentry(&nd);
++			stopd(sb)->hidden_mnt = nd_get_mnt(&nd);
+ 
+ 		} else if(!strncmp("sto=", options, 4)) {
+ 			/* parse the storage dir */
+@@ -204,9 +212,9 @@ mini_fo_parse_options(super_block_t *sb,
+ 				hidden_root2 = ERR_PTR(err);
+ 				goto out;
+ 			}
+-			hidden_root2 = nd2.dentry;
+-			stopd(sb)->storage_dir_dentry = nd2.dentry;
+-			stopd(sb)->hidden_mnt2 = nd2.mnt;
++			hidden_root2 = nd_get_dentry(&nd2);
++			stopd(sb)->storage_dir_dentry = nd_get_dentry(&nd2);
++			stopd(sb)->hidden_mnt2 = nd_get_mnt(&nd2);
+ 			stohs2(sb) = hidden_root2->d_sb;
+ 
+ 			/* validate storage dir, this is done in
+--- a/fs/mini_fo/mini_fo.h
++++ b/fs/mini_fo/mini_fo.h
+@@ -302,6 +302,10 @@ extern int mini_fo_tri_interpose(dentry_
+ extern int mini_fo_cp_cont(dentry_t *tgt_dentry, struct vfsmount *tgt_mnt,
+ 			   dentry_t *src_dentry, struct vfsmount *src_mnt);
+ 
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25)
++extern struct inode *mini_fo_iget(struct super_block *sb, unsigned long ino);
++#endif
++
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+ extern int mini_fo_create(inode_t *dir, dentry_t *dentry, int mode, struct nameidata *nd);
+ 
+@@ -501,6 +505,29 @@ static inline void double_unlock(struct
+ #endif  /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) */
+ #endif /* __KERNEL__ */
+ 
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25)
++static inline dentry_t *nd_get_dentry(struct nameidata *nd)
++{
++	return (nd->path.dentry);
++}
++
++static inline struct vfsmount *nd_get_mnt(struct nameidata *nd)
++{
++	return (nd->path.mnt);
++}
++#else
++static inline dentry_t *nd_get_dentry(struct nameidata *nd)
++{
++	return (nd->dentry);
++}
++
++static inline struct vfsmount *nd_get_mnt(struct nameidata *nd)
++{
++	return (nd->mnt);
++}
++#endif
++
+ /*
+  * Definitions for user and kernel code
+  */
+--- a/fs/mini_fo/super.c
++++ b/fs/mini_fo/super.c
+@@ -262,10 +262,31 @@ mini_fo_umount_begin(super_block_t *sb)
+ }
+ #endif
+ 
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25)
++struct inode *
++mini_fo_iget(struct super_block *sb, unsigned long ino)
++{
++	struct inode *inode;
++
++	inode = iget_locked(sb, ino);
++	if (!inode)
++		return ERR_PTR(-ENOMEM);
++
++	if (!(inode->i_state & I_NEW))
++		return inode;
++
++	mini_fo_read_inode(inode);
++
++	unlock_new_inode(inode);
++	return inode;
++}
++#endif /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25) */
+ 
+ struct super_operations mini_fo_sops =
+ {
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,25)
+ 	read_inode:		mini_fo_read_inode,
++#endif
+ #if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
+ 	write_inode:	mini_fo_write_inode,
+ #endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
+--- a/fs/mini_fo/aux.c
++++ b/fs/mini_fo/aux.c
+@@ -164,11 +164,11 @@ dentry_t *bpath_walk(super_block_t *sb,
+ 	err = vfs_path_lookup(mnt->mnt_root, mnt, bpath+1, 0, &nd);
+ 
+ 	/* validate */
+-	if (err || !nd.dentry || !nd.dentry->d_inode) {
++	if (err || !nd_get_dentry(&nd) || !nd_get_dentry(&nd)->d_inode) {
+ 		printk(KERN_CRIT "mini_fo: bpath_walk: path_walk failed.\n");
+ 		return NULL;
+ 	}
+-	return nd.dentry;
++	return nd_get_dentry(&nd);
+ }
+ 
+ 
diff --git a/target/linux/generic/patches-2.6.34/211-mini_fo_2.6.25_dentry_open_war.patch b/target/linux/generic/patches-2.6.34/211-mini_fo_2.6.25_dentry_open_war.patch
new file mode 100644
index 0000000000..48a19429b9
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/211-mini_fo_2.6.25_dentry_open_war.patch
@@ -0,0 +1,66 @@
+--- a/fs/mini_fo/meta.c
++++ b/fs/mini_fo/meta.c
+@@ -442,6 +442,11 @@ int meta_write_d_entry(dentry_t *dentry,
+ 			   S_IRUSR | S_IWUSR);
+ #endif
+ 	}
++
++	/* $%& err, is this correct? */
++	meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++	mntget(meta_mnt);
++
+         /* open META-file for writing */
+         meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
+         if(!meta_file || IS_ERR(meta_file)) {
+@@ -535,6 +540,11 @@ int meta_write_r_entry(dentry_t *dentry,
+ 			   meta_dentry, S_IRUSR | S_IWUSR);
+ #endif
+ 	}
++
++	/* $%& err, is this correct? */
++	meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++	mntget(meta_mnt);
++
+         /* open META-file for writing */
+         meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
+         if(!meta_file || IS_ERR(meta_file)) {
+@@ -671,14 +681,16 @@ int meta_sync_d_list(dentry_t *dentry, i
+ 		}
+ 	}
+ 
++	/* $%& err, is this correct? */
++	meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++	mntget(meta_mnt);
++
+         /* open META-file for writing */
+         meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
+                                   ERROR opening meta file.\n");
+-		/* we don't mntget so we dont't mntput (for now)
+-		 * mntput(meta_mnt);
+-		 */
++		mntput(meta_mnt);
+ 		dput(meta_dentry);
+ 		err = -1;
+                 goto out;
+@@ -811,14 +823,16 @@ int meta_sync_r_list(dentry_t *dentry, i
+ 		}
+ 	}
+ 
++	/* $%& err, is this correct? */
++	meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++	mntget(meta_mnt);
++
+         /* open META-file for writing */
+         meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
+                                   ERROR opening meta file.\n");
+-		/* we don't mntget so we dont't mntput (for now)
+-		 * mntput(meta_mnt);
+-		 */
++		mntput(meta_mnt);
+ 		dput(meta_dentry);
+ 		err = -1;
+                 goto out;
diff --git a/target/linux/generic/patches-2.6.34/212-mini_fo_2.6.26_fixes.patch b/target/linux/generic/patches-2.6.34/212-mini_fo_2.6.26_fixes.patch
new file mode 100644
index 0000000000..b5fa64e6a1
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/212-mini_fo_2.6.26_fixes.patch
@@ -0,0 +1,37 @@
+--- a/fs/mini_fo/super.c
++++ b/fs/mini_fo/super.c
+@@ -84,6 +84,7 @@ mini_fo_write_inode(inode_t *inode, int
+ #endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
+ 
+ 
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)
+ STATIC void
+ mini_fo_put_inode(inode_t *inode)
+ {
+@@ -99,6 +100,7 @@ mini_fo_put_inode(inode_t *inode)
+ 	if (atomic_read(&inode->i_count) == 1)
+ 		inode->i_nlink = 0;
+ }
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26) */
+ 
+ 
+ #if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
+@@ -238,7 +240,7 @@ mini_fo_clear_inode(inode_t *inode)
+  * dies.
+  */
+ STATIC void
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26))
+ mini_fo_umount_begin(struct vfsmount *mnt, int flags)
+ {
+ 	struct vfsmount *hidden_mnt;
+@@ -290,7 +292,9 @@ struct super_operations mini_fo_sops =
+ #if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
+ 	write_inode:	mini_fo_write_inode,
+ #endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)
+ 	put_inode:		mini_fo_put_inode,
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26) */
+ #if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
+ 	delete_inode:	mini_fo_delete_inode,
+ #endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
diff --git a/target/linux/generic/patches-2.6.34/213-mini_fo_2.6.27_fixes.patch b/target/linux/generic/patches-2.6.34/213-mini_fo_2.6.27_fixes.patch
new file mode 100644
index 0000000000..f92c18b254
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/213-mini_fo_2.6.27_fixes.patch
@@ -0,0 +1,41 @@
+--- a/fs/mini_fo/inode.c
++++ b/fs/mini_fo/inode.c
+@@ -439,7 +439,7 @@ mini_fo_symlink(inode_t *dir, dentry_t *
+ 	int err=0;
+ 	dentry_t *hidden_sto_dentry;
+ 	dentry_t *hidden_sto_dir_dentry;
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27))
+         umode_t mode;
+ #endif
+ 
+@@ -466,7 +466,7 @@ mini_fo_symlink(inode_t *dir, dentry_t *
+ 	down(&hidden_sto_dir_dentry->d_inode->i_sem);
+ #endif
+ 
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27))
+ 	mode = S_IALLUGO;
+ 	err = vfs_symlink(hidden_sto_dir_dentry->d_inode,
+ 			  hidden_sto_dentry, symname, mode);
+@@ -1128,7 +1128,7 @@ void mini_fo_put_link(struct dentry *den
+ #endif
+ 
+ STATIC int
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27))
+ mini_fo_permission(inode_t *inode, int mask, struct nameidata *nd)
+ #else
+ mini_fo_permission(inode_t *inode, int mask)
+@@ -1150,8 +1150,9 @@ mini_fo_permission(inode_t *inode, int m
+ 	 *	if (err)
+ 	 *		goto out;
+ 	 */
+-
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
++	err = inode_permission(hidden_inode, mask);
++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+ 	err = permission(hidden_inode, mask, nd);
+ #else
+ 	err = permission(hidden_inode, mask);
diff --git a/target/linux/generic/patches-2.6.34/214-mini_fo_2.6.29.patch b/target/linux/generic/patches-2.6.34/214-mini_fo_2.6.29.patch
new file mode 100644
index 0000000000..63d704bf51
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/214-mini_fo_2.6.29.patch
@@ -0,0 +1,96 @@
+--- a/fs/mini_fo/aux.c
++++ b/fs/mini_fo/aux.c
+@@ -236,7 +236,7 @@ int mini_fo_cp_cont(dentry_t *tgt_dentry
+ 	mntget(src_mnt);
+ 
+ 	/* open file write only */
+-	tgt_file = dentry_open(tgt_dentry, tgt_mnt, 0x1);
++	tgt_file = dentry_open(tgt_dentry, tgt_mnt, 0x1, current_cred());
+ 	if(!tgt_file || IS_ERR(tgt_file)) {
+ 		printk(KERN_CRIT "mini_fo_cp_cont: ERROR opening target file.\n");
+ 		err = PTR_ERR(tgt_file);
+@@ -244,7 +244,7 @@ int mini_fo_cp_cont(dentry_t *tgt_dentry
+ 	}
+ 
+ 	/* open file read only */
+-	src_file = dentry_open(src_dentry, src_mnt, 0x0);
++	src_file = dentry_open(src_dentry, src_mnt, 0x0, current_cred());
+ 	if(!src_file || IS_ERR(src_file)) {
+ 		printk(KERN_CRIT "mini_fo_cp_cont: ERROR opening source file.\n");
+ 		err = PTR_ERR(src_file);
+--- a/fs/mini_fo/file.c
++++ b/fs/mini_fo/file.c
+@@ -437,7 +437,7 @@ mini_fo_open(inode_t *inode, file_t *fil
+ 			mntget(stopd(inode->i_sb)->hidden_mnt);
+ 			hidden_file = dentry_open(hidden_dentry,
+ 						  stopd(inode->i_sb)->hidden_mnt,
+-						  hidden_flags);
++						  hidden_flags, file->f_cred);
+ 			if (IS_ERR(hidden_file)) {
+ 				err = PTR_ERR(hidden_file);
+ 				dput(hidden_dentry);
+@@ -479,7 +479,7 @@ mini_fo_open(inode_t *inode, file_t *fil
+ 			mntget(stopd(inode->i_sb)->hidden_mnt);
+ 			hidden_file = dentry_open(hidden_dentry,
+ 						  stopd(inode->i_sb)->hidden_mnt,
+-						  hidden_flags);
++						  hidden_flags, file->f_cred);
+ 			if (IS_ERR(hidden_file)) {
+ 				err = PTR_ERR(hidden_file);
+ 				dput(hidden_dentry);
+@@ -512,7 +512,7 @@ mini_fo_open(inode_t *inode, file_t *fil
+ 	mntget(stopd(inode->i_sb)->hidden_mnt2);
+ 	hidden_sto_file = dentry_open(hidden_sto_dentry,
+ 				      stopd(inode->i_sb)->hidden_mnt2,
+-				      hidden_flags);
++				      hidden_flags, file->f_cred);
+ 
+ 	/* dentry_open dputs the dentry if it fails */
+ 	if (IS_ERR(hidden_sto_file)) {
+--- a/fs/mini_fo/meta.c
++++ b/fs/mini_fo/meta.c
+@@ -56,7 +56,7 @@ int meta_build_lists(dentry_t *dentry)
+ 
+ 
+ 		/* open META-file for reading */
+-		meta_file = dentry_open(meta_dentry, meta_mnt, 0x0);
++		meta_file = dentry_open(meta_dentry, meta_mnt, 0x0, current_cred());
+ 		if(!meta_file || IS_ERR(meta_file)) {
+ 			printk(KERN_CRIT "mini_fo: meta_build_lists: \
+                                           ERROR opening META file.\n");
+@@ -448,7 +448,7 @@ int meta_write_d_entry(dentry_t *dentry,
+ 	mntget(meta_mnt);
+ 
+         /* open META-file for writing */
+-        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1, current_cred());
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
+                                   ERROR opening meta file.\n");
+@@ -546,7 +546,7 @@ int meta_write_r_entry(dentry_t *dentry,
+ 	mntget(meta_mnt);
+ 
+         /* open META-file for writing */
+-        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1, current_cred());
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_write_r_entry: \
+                                   ERROR opening meta file.\n");
+@@ -686,7 +686,7 @@ int meta_sync_d_list(dentry_t *dentry, i
+ 	mntget(meta_mnt);
+ 
+         /* open META-file for writing */
+-        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1, current_cred());
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
+                                   ERROR opening meta file.\n");
+@@ -828,7 +828,7 @@ int meta_sync_r_list(dentry_t *dentry, i
+ 	mntget(meta_mnt);
+ 
+         /* open META-file for writing */
+-        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1, current_cred());
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
+                                   ERROR opening meta file.\n");
diff --git a/target/linux/generic/patches-2.6.34/215-mini_fo_2.6.30.patch b/target/linux/generic/patches-2.6.34/215-mini_fo_2.6.30.patch
new file mode 100644
index 0000000000..2d20920614
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/215-mini_fo_2.6.30.patch
@@ -0,0 +1,157 @@
+--- a/fs/mini_fo/aux.c
++++ b/fs/mini_fo/aux.c
+@@ -86,8 +86,10 @@ int get_neg_sto_dentry(dentry_t *dentry)
+ 	len = dentry->d_name.len;
+ 	name = dentry->d_name.name;
+ 
++	mutex_lock(&dtohd2(dentry->d_parent)->d_inode->i_mutex);
+ 	dtohd2(dentry) =
+ 		lookup_one_len(name, dtohd2(dentry->d_parent), len);
++	mutex_unlock(&dtohd2(dentry->d_parent)->d_inode->i_mutex);
+ 
+  out:
+ 	return err;
+@@ -426,7 +428,9 @@ int build_sto_structure(dentry_t *dir, d
+ 		const unsigned char *name;
+ 		len = dtohd(dentry)->d_name.len;
+ 		name = dtohd(dentry)->d_name.name;
++		mutex_lock(&dtohd2(dir)->d_inode->i_mutex);
+ 		hidden_sto_dentry = lookup_one_len(name, dtohd2(dir), len);
++		mutex_unlock(&dtohd2(dir)->d_inode->i_mutex);
+ 		dtohd2(dentry) = hidden_sto_dentry;
+ 	}
+ 
+--- a/fs/mini_fo/inode.c
++++ b/fs/mini_fo/inode.c
+@@ -113,17 +113,23 @@ mini_fo_lookup(inode_t *dir, dentry_t *d
+ 		hidden_dir_dentry = hidden_dentry->d_parent;
+ 		kfree(bpath);
+ 	}
+-	else if(hidden_dir_dentry && hidden_dir_dentry->d_inode)
++	else if(hidden_dir_dentry && hidden_dir_dentry->d_inode) {
++		mutex_lock(&hidden_dir_dentry->d_inode->i_mutex);
+ 		hidden_dentry =
+ 			lookup_one_len(name, hidden_dir_dentry, namelen);
+-	else
++		mutex_unlock(&hidden_dir_dentry->d_inode->i_mutex);
++	} else {
+ 		hidden_dentry = NULL;
++	}
+ 
+-	if(hidden_sto_dir_dentry && hidden_sto_dir_dentry->d_inode)
++	if(hidden_sto_dir_dentry && hidden_sto_dir_dentry->d_inode) {
++		mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
+ 		hidden_sto_dentry =
+ 			lookup_one_len(name, hidden_sto_dir_dentry, namelen);
+-	else
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++	} else {
+ 		hidden_sto_dentry =  NULL;
++	}
+ 
+ 	/* catch error in lookup */
+ 	if (IS_ERR(hidden_dentry) || IS_ERR(hidden_sto_dentry)) {
+@@ -553,9 +559,11 @@ mini_fo_rmdir(inode_t *dir, dentry_t *de
+ #endif
+ 
+ 		/* Delete an old WOL file contained in the storage dir */
++		mutex_lock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		meta_dentry = lookup_one_len(META_FILENAME,
+ 					     hidden_sto_dentry,
+ 					     strlen(META_FILENAME));
++		mutex_unlock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		if(meta_dentry->d_inode) {
+ 			err = vfs_unlink(hidden_sto_dentry->d_inode, meta_dentry);
+ 			dput(meta_dentry);
+@@ -643,9 +651,11 @@ mini_fo_rmdir(inode_t *dir, dentry_t *de
+ #endif
+ 
+ 		/* Delete an old WOL file contained in the storage dir */
++		mutex_lock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		meta_dentry = lookup_one_len(META_FILENAME,
+ 					     hidden_sto_dentry,
+ 					     strlen(META_FILENAME));
++		mutex_unlock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		if(meta_dentry->d_inode) {
+ 			/* is this necessary? dget(meta_dentry); */
+ 			err = vfs_unlink(hidden_sto_dentry->d_inode,
+@@ -688,9 +698,11 @@ mini_fo_rmdir(inode_t *dir, dentry_t *de
+ #endif
+ 
+ 		/* Delete an old WOL file contained in the storage dir */
++		mutex_lock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		meta_dentry = lookup_one_len(META_FILENAME,
+ 					     hidden_sto_dentry,
+ 					     strlen(META_FILENAME));
++		mutex_unlock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		if(meta_dentry->d_inode) {
+ 			/* is this necessary? dget(meta_dentry); */
+ 			err = vfs_unlink(hidden_sto_dentry->d_inode,
+--- a/fs/mini_fo/meta.c
++++ b/fs/mini_fo/meta.c
+@@ -43,9 +43,11 @@ int meta_build_lists(dentry_t *dentry)
+ 
+   	/* might there be a META-file? */
+ 	if(dtohd2(dentry) && dtohd2(dentry)->d_inode) {
++		mutex_lock(&dtohd2(dentry)->d_inode->i_mutex);
+ 		meta_dentry = lookup_one_len(META_FILENAME,
+ 					     dtohd2(dentry),
+ 					     strlen(META_FILENAME));
++		mutex_unlock(&dtohd2(dentry)->d_inode->i_mutex);
+ 		if(!meta_dentry->d_inode) {
+ 			dput(meta_dentry);
+ 			goto out_ok;
+@@ -426,8 +428,11 @@ int meta_write_d_entry(dentry_t *dentry,
+ 			goto out;
+                 }
+         }
++
++	mutex_lock(&dtohd2(dentry)->d_inode->i_mutex);
+ 	meta_dentry = lookup_one_len(META_FILENAME,
+ 				     dtohd2(dentry), strlen (META_FILENAME));
++	mutex_unlock(&dtohd2(dentry)->d_inode->i_mutex);
+ 
+ 	/* We need to create a META-file */
+         if(!meta_dentry->d_inode) {
+@@ -527,9 +532,13 @@ int meta_write_r_entry(dentry_t *dentry,
+ 			goto out;
+                 }
+         }
++
++	mutex_lock(&dtohd2(dentry)->d_inode->i_mutex);
+ 	meta_dentry = lookup_one_len(META_FILENAME,
+ 				     dtohd2(dentry),
+ 				     strlen (META_FILENAME));
++	mutex_unlock(&dtohd2(dentry)->d_inode->i_mutex);
++
+         if(!meta_dentry->d_inode) {
+                 /* We need to create a META-file */
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+@@ -641,9 +650,13 @@ int meta_sync_d_list(dentry_t *dentry, i
+ 			goto out;
+                 }
+         }
++
++	mutex_lock(&dtohd2(dentry)->d_inode->i_mutex);
+ 	meta_dentry = lookup_one_len(META_FILENAME,
+ 				     dtohd2(dentry),
+ 				     strlen(META_FILENAME));
++	mutex_unlock(&dtohd2(dentry)->d_inode->i_mutex);
++
+         if(!meta_dentry->d_inode) {
+                 /* We need to create a META-file */
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+@@ -784,9 +797,13 @@ int meta_sync_r_list(dentry_t *dentry, i
+ 			goto out;
+                 }
+         }
++
++	mutex_lock(&dtohd2(dentry)->d_inode->i_mutex);
+ 	meta_dentry = lookup_one_len(META_FILENAME,
+ 				     dtohd2(dentry),
+ 				     strlen(META_FILENAME));
++	mutex_unlock(&dtohd2(dentry)->d_inode->i_mutex);
++
+         if(!meta_dentry->d_inode) {
+                 /* We need to create a META-file */
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
diff --git a/target/linux/generic/patches-2.6.34/216-mini_fo_locking.patch b/target/linux/generic/patches-2.6.34/216-mini_fo_locking.patch
new file mode 100644
index 0000000000..4f075920fb
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/216-mini_fo_locking.patch
@@ -0,0 +1,25 @@
+--- a/fs/mini_fo/state.c
++++ b/fs/mini_fo/state.c
+@@ -537,17 +537,17 @@ int nondir_mod_to_del(dentry_t *dentry)
+ 	dtohd(dentry) = NULL;
+ 	dtost(dentry) = DELETED;
+ 
+-	/* add deleted file to META-file */
+-	meta_add_d_entry(dentry->d_parent,
+-			 dentry->d_name.name,
+-			 dentry->d_name.len);
+-
+ 	/* was: unlock_dir(hidden_sto_dir_dentry); */
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
+ 	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
+ #else
+ 	up(&hidden_sto_dir_dentry->d_inode->i_sem);
+ #endif
++	/* add deleted file to META-file */
++	meta_add_d_entry(dentry->d_parent,
++			 dentry->d_name.name,
++			 dentry->d_name.len);
++
+ 	dput(hidden_sto_dir_dentry);
+ 
+  out:
diff --git a/target/linux/generic/patches-2.6.34/219-kobject_uevent.patch b/target/linux/generic/patches-2.6.34/219-kobject_uevent.patch
new file mode 100644
index 0000000000..1c1beaf9ae
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/219-kobject_uevent.patch
@@ -0,0 +1,42 @@
+--- a/lib/kobject_uevent.c
++++ b/lib/kobject_uevent.c
+@@ -30,7 +30,8 @@ u64 uevent_seqnum;
+ char uevent_helper[UEVENT_HELPER_PATH_LEN] = CONFIG_UEVENT_HELPER_PATH;
+ static DEFINE_SPINLOCK(sequence_lock);
+ #if defined(CONFIG_NET)
+-static struct sock *uevent_sock;
++struct sock *uevent_sock = NULL;
++EXPORT_SYMBOL_GPL(uevent_sock);
+ #endif
+ 
+ /* the strings here must match the enum in include/linux/kobject.h */
+@@ -43,6 +44,18 @@ static const char *kobject_actions[] = {
+ 	[KOBJ_OFFLINE] =	"offline",
+ };
+ 
++u64 uevent_next_seqnum(void)
++{
++	u64 seq;
++
++	spin_lock(&sequence_lock);
++	seq = ++uevent_seqnum;
++	spin_unlock(&sequence_lock);
++
++	return seq;
++}
++EXPORT_SYMBOL_GPL(uevent_next_seqnum);
++
+ /**
+  * kobject_action_type - translate action string to numeric type
+  *
+@@ -202,9 +215,7 @@ int kobject_uevent_env(struct kobject *k
+ 		kobj->state_remove_uevent_sent = 1;
+ 
+ 	/* we will send an event, so request a new sequence number */
+-	spin_lock(&sequence_lock);
+-	seq = ++uevent_seqnum;
+-	spin_unlock(&sequence_lock);
++	seq = uevent_next_seqnum();
+ 	retval = add_uevent_var(env, "SEQNUM=%llu", (unsigned long long)seq);
+ 	if (retval)
+ 		goto exit;
diff --git a/target/linux/generic/patches-2.6.34/220-sound_kconfig.patch b/target/linux/generic/patches-2.6.34/220-sound_kconfig.patch
new file mode 100644
index 0000000000..fb3df254dc
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/220-sound_kconfig.patch
@@ -0,0 +1,11 @@
+--- a/sound/core/Kconfig
++++ b/sound/core/Kconfig
+@@ -8,7 +8,7 @@ config SND_PCM
+ 	select GCD
+ 
+ config SND_HWDEP
+-	tristate
++	tristate "Sound hardware support"
+ 
+ config SND_RAWMIDI
+ 	tristate
diff --git a/target/linux/generic/patches-2.6.34/221-binfmt_elf_gcc4.1.patch b/target/linux/generic/patches-2.6.34/221-binfmt_elf_gcc4.1.patch
new file mode 100644
index 0000000000..f452a25774
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/221-binfmt_elf_gcc4.1.patch
@@ -0,0 +1,11 @@
+--- a/fs/binfmt_elf.c
++++ b/fs/binfmt_elf.c
+@@ -1136,7 +1136,7 @@ static unsigned long vma_dump_size(struc
+ 	if (FILTER(ELF_HEADERS) &&
+ 	    vma->vm_pgoff == 0 && (vma->vm_flags & VM_READ)) {
+ 		u32 __user *header = (u32 __user *) vma->vm_start;
+-		u32 word;
++		u32 word = 0;
+ 		mm_segment_t fs = get_fs();
+ 		/*
+ 		 * Doing it this way gets the constant folded by GCC.
diff --git a/target/linux/generic/patches-2.6.34/222-partial_eraseblock_write.patch b/target/linux/generic/patches-2.6.34/222-partial_eraseblock_write.patch
new file mode 100644
index 0000000000..0c7672e8be
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/222-partial_eraseblock_write.patch
@@ -0,0 +1,146 @@
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -21,6 +21,8 @@
+ #include <linux/root_dev.h>
+ #include <linux/magic.h>
+ 
++#define MTD_ERASE_PARTIAL	0x8000 /* partition only covers parts of an erase block */
++
+ /* Our partition linked list */
+ static LIST_HEAD(mtd_partitions);
+ 
+@@ -226,13 +228,60 @@ static int part_erase(struct mtd_info *m
+ 		return -EROFS;
+ 	if (instr->addr >= mtd->size)
+ 		return -EINVAL;
++
++	instr->partial_start = false;
++	if (mtd->flags & MTD_ERASE_PARTIAL) {
++		size_t readlen = 0;
++		u64 mtd_ofs;
++
++		instr->erase_buf = kmalloc(part->master->erasesize, GFP_ATOMIC);
++		if (!instr->erase_buf)
++			return -ENOMEM;
++
++		mtd_ofs = part->offset + instr->addr;
++		instr->erase_buf_ofs = do_div(mtd_ofs, part->master->erasesize);
++
++		if (instr->erase_buf_ofs > 0) {
++			instr->addr -= instr->erase_buf_ofs;
++			ret = part->master->read(part->master,
++				instr->addr + part->offset,
++				part->master->erasesize,
++				&readlen, instr->erase_buf);
++
++			instr->partial_start = true;
++		} else {
++			mtd_ofs = part->offset + part->mtd.size;
++			instr->erase_buf_ofs = part->master->erasesize -
++				do_div(mtd_ofs, part->master->erasesize);
++
++			if (instr->erase_buf_ofs > 0) {
++				instr->len += instr->erase_buf_ofs;
++				ret = part->master->read(part->master,
++					part->offset + instr->addr +
++					instr->len - part->master->erasesize,
++					part->master->erasesize, &readlen,
++					instr->erase_buf);
++			} else {
++				ret = 0;
++			}
++		}
++		if (ret < 0) {
++			kfree(instr->erase_buf);
++			return ret;
++		}
++
++	}
++
+ 	instr->addr += part->offset;
+ 	ret = part->master->erase(part->master, instr);
+ 	if (ret) {
+ 		if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
+ 			instr->fail_addr -= part->offset;
+ 		instr->addr -= part->offset;
++		if (mtd->flags & MTD_ERASE_PARTIAL)
++			kfree(instr->erase_buf);
+ 	}
++
+ 	return ret;
+ }
+ 
+@@ -240,7 +289,25 @@ void mtd_erase_callback(struct erase_inf
+ {
+ 	if (instr->mtd->erase == part_erase) {
+ 		struct mtd_part *part = PART(instr->mtd);
++		size_t wrlen = 0;
+ 
++		if (instr->mtd->flags & MTD_ERASE_PARTIAL) {
++			if (instr->partial_start) {
++				part->master->write(part->master,
++					instr->addr, instr->erase_buf_ofs,
++					&wrlen, instr->erase_buf);
++				instr->addr += instr->erase_buf_ofs;
++			} else {
++				instr->len -= instr->erase_buf_ofs;
++				part->master->write(part->master,
++					instr->addr + instr->len,
++					instr->erase_buf_ofs, &wrlen,
++					instr->erase_buf +
++					part->master->erasesize -
++					instr->erase_buf_ofs);
++			}
++			kfree(instr->erase_buf);
++		}
+ 		if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
+ 			instr->fail_addr -= part->offset;
+ 		instr->addr -= part->offset;
+@@ -473,18 +540,24 @@ static struct mtd_part *add_one_partitio
+ 	if ((slave->mtd.flags & MTD_WRITEABLE) &&
+ 	    mtd_mod_by_eb(slave->offset, &slave->mtd)) {
+ 		/* Doesn't start on a boundary of major erase size */
+-		/* FIXME: Let it be writable if it is on a boundary of
+-		 * _minor_ erase size though */
+-		slave->mtd.flags &= ~MTD_WRITEABLE;
+-		printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
+-			part->name);
++		slave->mtd.flags |= MTD_ERASE_PARTIAL;
++		if (((u32) slave->mtd.size) > master->erasesize)
++			slave->mtd.flags &= ~MTD_WRITEABLE;
++		else
++			slave->mtd.erasesize = slave->mtd.size;
+ 	}
+ 	if ((slave->mtd.flags & MTD_WRITEABLE) &&
+-	    mtd_mod_by_eb(slave->mtd.size, &slave->mtd)) {
+-		slave->mtd.flags &= ~MTD_WRITEABLE;
+-		printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
+-			part->name);
+-	}
++	    mtd_mod_by_eb(slave->offset + slave->mtd.size, &slave->mtd)) {
++		slave->mtd.flags |= MTD_ERASE_PARTIAL;
++
++		if ((u32) slave->mtd.size > master->erasesize)
++			slave->mtd.flags &= ~MTD_WRITEABLE;
++		else
++			slave->mtd.erasesize = slave->mtd.size;
++	}
++	if ((slave->mtd.flags & (MTD_ERASE_PARTIAL|MTD_WRITEABLE)) == MTD_ERASE_PARTIAL)
++		printk(KERN_WARNING"mtd: partition \"%s\" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only\n",
++				part->name);
+ 
+ 	slave->mtd.ecclayout = master->ecclayout;
+ 	if (master->block_isbad) {
+--- a/include/linux/mtd/mtd.h
++++ b/include/linux/mtd/mtd.h
+@@ -46,6 +46,10 @@ struct erase_info {
+ 	u_long priv;
+ 	u_char state;
+ 	struct erase_info *next;
++
++	u8 *erase_buf;
++	u32 erase_buf_ofs;
++	bool partial_start;
+ };
+ 
+ struct mtd_erase_region_info {
diff --git a/target/linux/generic/patches-2.6.34/240-packet_socket_type.patch b/target/linux/generic/patches-2.6.34/240-packet_socket_type.patch
new file mode 100644
index 0000000000..4d4c01155f
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/240-packet_socket_type.patch
@@ -0,0 +1,133 @@
+This patch allows the user to specify desired packet types (outgoing,
+broadcast, unicast, etc.) on packet sockets via setsockopt.
+This can reduce the load in situations where only a limited number
+of packet types are necessary
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+
+--- a/include/linux/if_packet.h
++++ b/include/linux/if_packet.h
+@@ -29,6 +29,8 @@ struct sockaddr_ll {
+ /* These ones are invisible by user level */
+ #define PACKET_LOOPBACK		5		/* MC/BRD frame looped back */
+ #define PACKET_FASTROUTE	6		/* Fastrouted frame	*/
++#define PACKET_MASK_ANY		0xffffffff	/* mask for packet type bits */
++
+ 
+ /* Packet socket options */
+ 
+@@ -47,6 +49,8 @@ struct sockaddr_ll {
+ #define PACKET_TX_RING			13
+ #define PACKET_LOSS			14
+ #define PACKET_VNET_HDR			15
++#define PACKET_RECV_TYPE		16
++
+ 
+ struct tpacket_stats {
+ 	unsigned int	tp_packets;
+--- a/net/packet/af_packet.c
++++ b/net/packet/af_packet.c
+@@ -202,6 +202,7 @@ struct packet_sock {
+ 	unsigned int		tp_reserve;
+ 	unsigned int		tp_loss:1;
+ 	struct packet_type	prot_hook ____cacheline_aligned_in_smp;
++	__u8			pkt_type:3;
+ };
+ 
+ struct packet_skb_cb {
+@@ -336,6 +337,7 @@ static int packet_rcv_spkt(struct sk_buf
+ {
+ 	struct sock *sk;
+ 	struct sockaddr_pkt *spkt;
++	struct packet_sock *po;
+ 
+ 	/*
+ 	 *	When we registered the protocol we saved the socket in the data
+@@ -343,6 +345,7 @@ static int packet_rcv_spkt(struct sk_buf
+ 	 */
+ 
+ 	sk = pt->af_packet_priv;
++	po = pkt_sk(sk);
+ 
+ 	/*
+ 	 *	Yank back the headers [hope the device set this
+@@ -355,7 +358,7 @@ static int packet_rcv_spkt(struct sk_buf
+ 	 *	so that this procedure is noop.
+ 	 */
+ 
+-	if (skb->pkt_type == PACKET_LOOPBACK)
++	if (!(po->pkt_type & (1 << skb->pkt_type)))
+ 		goto out;
+ 
+ 	if (!net_eq(dev_net(dev), sock_net(sk)))
+@@ -531,12 +534,12 @@ static int packet_rcv(struct sk_buff *sk
+ 	int skb_len = skb->len;
+ 	unsigned int snaplen, res;
+ 
+-	if (skb->pkt_type == PACKET_LOOPBACK)
+-		goto drop;
+-
+ 	sk = pt->af_packet_priv;
+ 	po = pkt_sk(sk);
+ 
++	if (!(po->pkt_type & (1 << skb->pkt_type)))
++		goto drop;
++
+ 	if (!net_eq(dev_net(dev), sock_net(sk)))
+ 		goto drop;
+ 
+@@ -651,12 +654,12 @@ static int tpacket_rcv(struct sk_buff *s
+ 	struct timeval tv;
+ 	struct timespec ts;
+ 
+-	if (skb->pkt_type == PACKET_LOOPBACK)
+-		goto drop;
+-
+ 	sk = pt->af_packet_priv;
+ 	po = pkt_sk(sk);
+ 
++	if (!(po->pkt_type & (1 << skb->pkt_type)))
++		goto drop;
++
+ 	if (!net_eq(dev_net(dev), sock_net(sk)))
+ 		goto drop;
+ 
+@@ -1464,6 +1467,7 @@ static int packet_create(struct net *net
+ 	spin_lock_init(&po->bind_lock);
+ 	mutex_init(&po->pg_vec_lock);
+ 	po->prot_hook.func = packet_rcv;
++	po->pkt_type = PACKET_MASK_ANY & ~(1 << PACKET_LOOPBACK);
+ 
+ 	if (sock->type == SOCK_PACKET)
+ 		po->prot_hook.func = packet_rcv_spkt;
+@@ -1968,6 +1972,16 @@ packet_setsockopt(struct socket *sock, i
+ 		po->has_vnet_hdr = !!val;
+ 		return 0;
+ 	}
++        case PACKET_RECV_TYPE:
++        {
++                unsigned int val;
++                if (optlen != sizeof(val))
++                        return -EINVAL;
++                if (copy_from_user(&val, optval, sizeof(val)))
++                        return -EFAULT;
++                po->pkt_type = val & ~PACKET_LOOPBACK;
++                return 0;
++        }
+ 	default:
+ 		return -ENOPROTOOPT;
+ 	}
+@@ -2025,6 +2039,13 @@ static int packet_getsockopt(struct sock
+ 
+ 		data = &val;
+ 		break;
++	case PACKET_RECV_TYPE:
++		if (len > sizeof(unsigned int))
++			len = sizeof(unsigned int);
++		val = po->pkt_type;
++
++		data = &val;
++		break;
+ 	case PACKET_VERSION:
+ 		if (len > sizeof(int))
+ 			len = sizeof(int);
diff --git a/target/linux/generic/patches-2.6.34/250-pppoe_header_pad.patch b/target/linux/generic/patches-2.6.34/250-pppoe_header_pad.patch
new file mode 100644
index 0000000000..a2535db60e
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/250-pppoe_header_pad.patch
@@ -0,0 +1,20 @@
+--- a/drivers/net/pppoe.c
++++ b/drivers/net/pppoe.c
+@@ -862,7 +862,7 @@ static int pppoe_sendmsg(struct kiocb *i
+ 		goto end;
+ 
+ 
+-	skb = sock_wmalloc(sk, total_len + dev->hard_header_len + 32,
++	skb = sock_wmalloc(sk, total_len + dev->hard_header_len + 32 + NET_SKB_PAD,
+ 			   0, GFP_KERNEL);
+ 	if (!skb) {
+ 		error = -ENOMEM;
+@@ -870,7 +870,7 @@ static int pppoe_sendmsg(struct kiocb *i
+ 	}
+ 
+ 	/* Reserve space for headers. */
+-	skb_reserve(skb, dev->hard_header_len);
++	skb_reserve(skb, dev->hard_header_len + NET_SKB_PAD);
+ 	skb_reset_network_header(skb);
+ 
+ 	skb->dev = dev;
diff --git a/target/linux/generic/patches-2.6.34/260-crypto_optional_tests.patch b/target/linux/generic/patches-2.6.34/260-crypto_optional_tests.patch
new file mode 100644
index 0000000000..f431f5d0ca
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/260-crypto_optional_tests.patch
@@ -0,0 +1,63 @@
+--- a/crypto/Kconfig
++++ b/crypto/Kconfig
+@@ -96,6 +96,10 @@ config CRYPTO_MANAGER2
+ 	select CRYPTO_BLKCIPHER2
+ 	select CRYPTO_PCOMP
+ 
++config CRYPTO_MANAGER_NO_TESTS
++	bool "Disable internal testsuite to save space"
++	depends on CRYPTO_MANAGER
++
+ config CRYPTO_GF128MUL
+ 	tristate "GF(2^128) multiplication functions (EXPERIMENTAL)"
+ 	depends on EXPERIMENTAL
+--- a/crypto/testmgr.c
++++ b/crypto/testmgr.c
+@@ -47,6 +47,8 @@
+ #define ENCRYPT 1
+ #define DECRYPT 0
+ 
++#ifndef CONFIG_CRYPTO_MANAGER_NO_TESTS
++
+ struct tcrypt_result {
+ 	struct completion completion;
+ 	int err;
+@@ -2443,8 +2445,11 @@ static int alg_find_test(const char *alg
+ 	return -1;
+ }
+ 
++#endif /* CONFIG_CRYPTO_MANAGER_NO_TESTS */
++
+ int alg_test(const char *driver, const char *alg, u32 type, u32 mask)
+ {
++#ifndef CONFIG_CRYPTO_MANAGER_NO_TESTS
+ 	int i;
+ 	int j;
+ 	int rc;
+@@ -2499,5 +2504,8 @@ notest:
+ 	return 0;
+ non_fips_alg:
+ 	return -EINVAL;
++#else /* CONFIG_CRYPTO_MANAGER_NO_TESTS */
++	return 0;
++#endif /* CONFIG_CRYPTO_MANAGER_NO_TESTS */
+ }
+ EXPORT_SYMBOL_GPL(alg_test);
+--- a/crypto/testmgr.h
++++ b/crypto/testmgr.h
+@@ -20,6 +20,8 @@
+ 
+ #include <crypto/compress.h>
+ 
++#ifndef CONFIG_CRYPTO_MANAGER_NO_TESTS
++
+ #define MAX_DIGEST_SIZE		64
+ #define MAX_TAP			8
+ 
+@@ -9552,4 +9554,6 @@ static struct hash_testvec crc32c_tv_tem
+ 	},
+ };
+ 
++#endif /* CONFIG_CRYPTO_MANAGER_NO_TESTS */
++
+ #endif	/* _CRYPTO_TESTMGR_H */
diff --git a/target/linux/generic/patches-2.6.34/400-ledtrig_morse.patch b/target/linux/generic/patches-2.6.34/400-ledtrig_morse.patch
new file mode 100644
index 0000000000..3f43c90aca
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/400-ledtrig_morse.patch
@@ -0,0 +1,18 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -354,4 +354,8 @@ endif # LEDS_TRIGGERS
+ 
+ endif # LEDS_CLASS
+ 
++config LEDS_TRIGGER_MORSE
++	tristate "LED Morse Trigger"
++	depends on LEDS_TRIGGERS
++
+ endif # NEW_LEDS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -46,3 +46,4 @@ obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT)	+=
+ obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT)	+= ledtrig-backlight.o
+ obj-$(CONFIG_LEDS_TRIGGER_GPIO)		+= ledtrig-gpio.o
+ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
++obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o
diff --git a/target/linux/generic/patches-2.6.34/402-ledtrig_netdev.patch b/target/linux/generic/patches-2.6.34/402-ledtrig_netdev.patch
new file mode 100644
index 0000000000..858966c908
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/402-ledtrig_netdev.patch
@@ -0,0 +1,21 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -358,4 +358,11 @@ config LEDS_TRIGGER_MORSE
+ 	tristate "LED Morse Trigger"
+ 	depends on LEDS_TRIGGERS
+ 
++config LEDS_TRIGGER_NETDEV
++	tristate "LED Netdev Trigger"
++	depends on NET && LEDS_TRIGGERS
++	help
++	  This allows LEDs to be controlled by network device activity.
++	  If unsure, say Y.
++
+ endif # NEW_LEDS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -47,3 +47,4 @@ obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT)	+=
+ obj-$(CONFIG_LEDS_TRIGGER_GPIO)		+= ledtrig-gpio.o
+ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
+ obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o
++obj-$(CONFIG_LEDS_TRIGGER_NETDEV)      += ledtrig-netdev.o
diff --git a/target/linux/generic/patches-2.6.34/410-gpio_buttons.patch b/target/linux/generic/patches-2.6.34/410-gpio_buttons.patch
new file mode 100644
index 0000000000..e38c31de40
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/410-gpio_buttons.patch
@@ -0,0 +1,31 @@
+--- a/drivers/input/misc/Kconfig
++++ b/drivers/input/misc/Kconfig
+@@ -340,4 +340,20 @@ config INPUT_PCAP
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called pcap_keys.
+ 
++config INPUT_GPIO_BUTTONS
++	tristate "Polled GPIO buttons interface"
++	depends on GENERIC_GPIO
++	select INPUT_POLLDEV
++	help
++	  This driver implements support for buttons connected
++	  to GPIO pins of various CPUs (and some other chips).
++
++	  Say Y here if your device has buttons connected
++	  directly to such GPIO pins.  Your board-specific
++	  setup logic must also provide a platform device,
++	  with configuration data saying which GPIOs are used.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called gpio-buttons.
++
+ endif
+--- a/drivers/input/misc/Makefile
++++ b/drivers/input/misc/Makefile
+@@ -32,4 +32,5 @@ obj-$(CONFIG_INPUT_WINBOND_CIR)		+= winb
+ obj-$(CONFIG_INPUT_WISTRON_BTNS)	+= wistron_btns.o
+ obj-$(CONFIG_INPUT_WM831X_ON)		+= wm831x-on.o
+ obj-$(CONFIG_INPUT_YEALINK)		+= yealink.o
++obj-$(CONFIG_INPUT_GPIO_BUTTONS)	+= gpio_buttons.o
+ 
diff --git a/target/linux/generic/patches-2.6.34/420-gpiodev.patch b/target/linux/generic/patches-2.6.34/420-gpiodev.patch
new file mode 100644
index 0000000000..27da3c7812
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/420-gpiodev.patch
@@ -0,0 +1,27 @@
+--- a/drivers/char/Kconfig
++++ b/drivers/char/Kconfig
+@@ -1024,6 +1024,14 @@ config CS5535_GPIO
+ 
+ 	  If compiled as a module, it will be called cs5535_gpio.
+ 
++config GPIO_DEVICE
++	tristate "GPIO device support"
++	depends on GENERIC_GPIO
++	help
++	  Say Y to enable Linux GPIO device support.  This allows control of
++	  GPIO pins using a character device
++
++
+ config RAW_DRIVER
+ 	tristate "RAW driver (/dev/raw/rawN)"
+ 	depends on BLOCK
+--- a/drivers/char/Makefile
++++ b/drivers/char/Makefile
+@@ -95,6 +95,7 @@ obj-$(CONFIG_SCx200_GPIO)	+= scx200_gpio
+ obj-$(CONFIG_PC8736x_GPIO)	+= pc8736x_gpio.o
+ obj-$(CONFIG_NSC_GPIO)		+= nsc_gpio.o
+ obj-$(CONFIG_CS5535_GPIO)	+= cs5535_gpio.o
++obj-$(CONFIG_GPIO_DEVICE)	+= gpio_dev.o
+ obj-$(CONFIG_GPIO_TB0219)	+= tb0219.o
+ obj-$(CONFIG_TELCLOCK)		+= tlclk.o
+ 
diff --git a/target/linux/generic/patches-2.6.34/430-scsi_header_fix.patch b/target/linux/generic/patches-2.6.34/430-scsi_header_fix.patch
new file mode 100644
index 0000000000..59e4333611
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/430-scsi_header_fix.patch
@@ -0,0 +1,17 @@
+--- a/include/scsi/scsi.h
++++ b/include/scsi/scsi.h
+@@ -149,10 +149,10 @@ struct scsi_cmnd;
+ 
+ /* defined in T10 SCSI Primary Commands-2 (SPC2) */
+ struct scsi_varlen_cdb_hdr {
+-	u8 opcode;        /* opcode always == VARIABLE_LENGTH_CMD */
+-	u8 control;
+-	u8 misc[5];
+-	u8 additional_cdb_length;         /* total cdb length - 8 */
++	__u8 opcode;        /* opcode always == VARIABLE_LENGTH_CMD */
++	__u8 control;
++	__u8 misc[5];
++	__u8 additional_cdb_length;         /* total cdb length - 8 */
+ 	__be16 service_action;
+ 	/* service specific data follows */
+ };
diff --git a/target/linux/generic/patches-2.6.34/510-yaffs_support.patch b/target/linux/generic/patches-2.6.34/510-yaffs_support.patch
new file mode 100644
index 0000000000..192181f005
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/510-yaffs_support.patch
@@ -0,0 +1,18 @@
+--- a/fs/Kconfig
++++ b/fs/Kconfig
+@@ -44,6 +44,7 @@ source "fs/gfs2/Kconfig"
+ source "fs/ocfs2/Kconfig"
+ source "fs/btrfs/Kconfig"
+ source "fs/nilfs2/Kconfig"
++source "fs/yaffs2/Kconfig"
+ 
+ endif # BLOCK
+ 
+--- a/fs/Makefile
++++ b/fs/Makefile
+@@ -127,3 +127,5 @@ obj-$(CONFIG_BTRFS_FS)		+= btrfs/
+ obj-$(CONFIG_GFS2_FS)           += gfs2/
+ obj-$(CONFIG_EXOFS_FS)          += exofs/
+ obj-$(CONFIG_CEPH_FS)		+= ceph/
++obj-$(CONFIG_YAFFS_FS)		+= yaffs2/
++
diff --git a/target/linux/generic/patches-2.6.34/511-yaffs-cvs-2009-04-24.patch b/target/linux/generic/patches-2.6.34/511-yaffs-cvs-2009-04-24.patch
new file mode 100644
index 0000000000..c334b17d08
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/511-yaffs-cvs-2009-04-24.patch
@@ -0,0 +1,12344 @@
+--- a/fs/yaffs2/devextras.h
++++ b/fs/yaffs2/devextras.h
+@@ -14,194 +14,135 @@
+  */
+ 
+ /*
+- * This file is just holds extra declarations used during development.
+- * Most of these are from kernel includes placed here so we can use them in
+- * applications.
++ * This file is just holds extra declarations of macros that would normally
++ * be providesd in the Linux kernel. These macros have been written from
++ * scratch but are functionally equivalent to the Linux ones.
+  *
+  */
+ 
+ #ifndef __EXTRAS_H__
+ #define __EXTRAS_H__
+ 
+-#if defined WIN32
+-#define __inline__ __inline
+-#define new newHack
+-#endif
+-
+-#if !(defined __KERNEL__) || (defined WIN32)
+ 
+-/* User space defines */
++#if !(defined __KERNEL__)
+ 
++/* Definition of types */
+ typedef unsigned char __u8;
+ typedef unsigned short __u16;
+ typedef unsigned __u32;
+ 
++#endif
++
+ /*
+- * Simple doubly linked list implementation.
+- *
+- * Some of the internal functions ("__xxx") are useful when
+- * manipulating whole lists rather than single entries, as
+- * sometimes we already know the next/prev entries and we can
+- * generate better code by using them directly rather than
+- * using the generic single-entry routines.
++ * This is a simple doubly linked list implementation that matches the
++ * way the Linux kernel doubly linked list implementation works.
+  */
+ 
+-#define prefetch(x) 1
+-
+-struct list_head {
+-	struct list_head *next, *prev;
++struct ylist_head {
++	struct ylist_head *next; /* next in chain */
++	struct ylist_head *prev; /* previous in chain */
+ };
+ 
+-#define LIST_HEAD_INIT(name) { &(name), &(name) }
+ 
+-#define LIST_HEAD(name) \
+-	struct list_head name = LIST_HEAD_INIT(name)
++/* Initialise a static list */
++#define YLIST_HEAD(name) \
++struct ylist_head name = { &(name), &(name)}
++
+ 
+-#define INIT_LIST_HEAD(ptr) do { \
+-	(ptr)->next = (ptr); (ptr)->prev = (ptr); \
++
++/* Initialise a list head to an empty list */
++#define YINIT_LIST_HEAD(p) \
++do { \
++	(p)->next = (p);\
++	(p)->prev = (p); \
+ } while (0)
+ 
+-/*
+- * Insert a new entry between two known consecutive entries.
+- *
+- * This is only for internal list manipulation where we know
+- * the prev/next entries already!
+- */
+-static __inline__ void __list_add(struct list_head *new,
+-				  struct list_head *prev,
+-				  struct list_head *next)
+-{
+-	next->prev = new;
+-	new->next = next;
+-	new->prev = prev;
+-	prev->next = new;
+-}
+ 
+-/**
+- * list_add - add a new entry
+- * @new: new entry to be added
+- * @head: list head to add it after
+- *
+- * Insert a new entry after the specified head.
+- * This is good for implementing stacks.
+- */
+-static __inline__ void list_add(struct list_head *new, struct list_head *head)
++/* Add an element to a list */
++static __inline__ void ylist_add(struct ylist_head *newEntry,
++				struct ylist_head *list)
+ {
+-	__list_add(new, head, head->next);
+-}
++	struct ylist_head *listNext = list->next;
++
++	list->next = newEntry;
++	newEntry->prev = list;
++	newEntry->next = listNext;
++	listNext->prev = newEntry;
+ 
+-/**
+- * list_add_tail - add a new entry
+- * @new: new entry to be added
+- * @head: list head to add it before
+- *
+- * Insert a new entry before the specified head.
+- * This is useful for implementing queues.
+- */
+-static __inline__ void list_add_tail(struct list_head *new,
+-				     struct list_head *head)
+-{
+-	__list_add(new, head->prev, head);
+ }
+ 
+-/*
+- * Delete a list entry by making the prev/next entries
+- * point to each other.
+- *
+- * This is only for internal list manipulation where we know
+- * the prev/next entries already!
+- */
+-static __inline__ void __list_del(struct list_head *prev,
+-				  struct list_head *next)
++static __inline__ void ylist_add_tail(struct ylist_head *newEntry,
++				 struct ylist_head *list)
+ {
+-	next->prev = prev;
+-	prev->next = next;
++	struct ylist_head *listPrev = list->prev;
++
++	list->prev = newEntry;
++	newEntry->next = list;
++	newEntry->prev = listPrev;
++	listPrev->next = newEntry;
++
+ }
+ 
+-/**
+- * list_del - deletes entry from list.
+- * @entry: the element to delete from the list.
+- * Note: list_empty on entry does not return true after this, the entry is
+- * in an undefined state.
+- */
+-static __inline__ void list_del(struct list_head *entry)
++
++/* Take an element out of its current list, with or without
++ * reinitialising the links.of the entry*/
++static __inline__ void ylist_del(struct ylist_head *entry)
+ {
+-	__list_del(entry->prev, entry->next);
++	struct ylist_head *listNext = entry->next;
++	struct ylist_head *listPrev = entry->prev;
++
++	listNext->prev = listPrev;
++	listPrev->next = listNext;
++
+ }
+ 
+-/**
+- * list_del_init - deletes entry from list and reinitialize it.
+- * @entry: the element to delete from the list.
+- */
+-static __inline__ void list_del_init(struct list_head *entry)
++static __inline__ void ylist_del_init(struct ylist_head *entry)
+ {
+-	__list_del(entry->prev, entry->next);
+-	INIT_LIST_HEAD(entry);
++	ylist_del(entry);
++	entry->next = entry->prev = entry;
+ }
+ 
+-/**
+- * list_empty - tests whether a list is empty
+- * @head: the list to test.
+- */
+-static __inline__ int list_empty(struct list_head *head)
++
++/* Test if the list is empty */
++static __inline__ int ylist_empty(struct ylist_head *entry)
+ {
+-	return head->next == head;
++	return (entry->next == entry);
+ }
+ 
+-/**
+- * list_splice - join two lists
+- * @list: the new list to add.
+- * @head: the place to add it in the first list.
++
++/* ylist_entry takes a pointer to a list entry and offsets it to that
++ * we can find a pointer to the object it is embedded in.
+  */
+-static __inline__ void list_splice(struct list_head *list,
+-				   struct list_head *head)
+-{
+-	struct list_head *first = list->next;
+ 
+-	if (first != list) {
+-		struct list_head *last = list->prev;
+-		struct list_head *at = head->next;
+-
+-		first->prev = head;
+-		head->next = first;
+-
+-		last->next = at;
+-		at->prev = last;
+-	}
+-}
+ 
+-/**
+- * list_entry - get the struct for this entry
+- * @ptr:	the &struct list_head pointer.
+- * @type:	the type of the struct this is embedded in.
+- * @member:	the name of the list_struct within the struct.
+- */
+-#define list_entry(ptr, type, member) \
+-	((type *)((char *)(ptr)-(unsigned long)(&((type *)0)->member)))
+-
+-/**
+- * list_for_each	-	iterate over a list
+- * @pos:	the &struct list_head to use as a loop counter.
+- * @head:	the head for your list.
+- */
+-#define list_for_each(pos, head) \
+-	for (pos = (head)->next, prefetch(pos->next); pos != (head); \
+-        	pos = pos->next, prefetch(pos->next))
+-
+-/**
+- * list_for_each_safe	-	iterate over a list safe against removal
+- *                              of list entry
+- * @pos:	the &struct list_head to use as a loop counter.
+- * @n:		another &struct list_head to use as temporary storage
+- * @head:	the head for your list.
+- */
+-#define list_for_each_safe(pos, n, head) \
+-	for (pos = (head)->next, n = pos->next; pos != (head); \
+-		pos = n, n = pos->next)
++#define ylist_entry(entry, type, member) \
++	((type *)((char *)(entry)-(unsigned long)(&((type *)NULL)->member)))
+ 
+-/*
+- * File types
++
++/* ylist_for_each and list_for_each_safe  iterate over lists.
++ * ylist_for_each_safe uses temporary storage to make the list delete safe
+  */
++
++#define ylist_for_each(itervar, list) \
++	for (itervar = (list)->next; itervar != (list); itervar = itervar->next)
++
++#define ylist_for_each_safe(itervar, saveVar, list) \
++	for (itervar = (list)->next, saveVar = (list)->next->next; \
++		itervar != (list); itervar = saveVar, saveVar = saveVar->next)
++
++
++#if !(defined __KERNEL__)
++
++
++#ifndef WIN32
++#include <sys/stat.h>
++#endif
++
++
++#ifdef CONFIG_YAFFS_PROVIDE_DEFS
++/* File types */
++
++
+ #define DT_UNKNOWN	0
+ #define DT_FIFO		1
+ #define DT_CHR		2
+@@ -212,6 +153,7 @@ static __inline__ void list_splice(struc
+ #define DT_SOCK		12
+ #define DT_WHT		14
+ 
++
+ #ifndef WIN32
+ #include <sys/stat.h>
+ #endif
+@@ -227,10 +169,6 @@ static __inline__ void list_splice(struc
+ #define ATTR_ATIME	16
+ #define ATTR_MTIME	32
+ #define ATTR_CTIME	64
+-#define ATTR_ATIME_SET	128
+-#define ATTR_MTIME_SET	256
+-#define ATTR_FORCE	512	/* Not a change, but a change it */
+-#define ATTR_ATTR_FLAG	1024
+ 
+ struct iattr {
+ 	unsigned int ia_valid;
+@@ -244,21 +182,15 @@ struct iattr {
+ 	unsigned int ia_attr_flags;
+ };
+ 
+-#define KERN_DEBUG
++#endif
+ 
+ #else
+ 
+-#ifndef WIN32
+ #include <linux/types.h>
+-#include <linux/list.h>
+ #include <linux/fs.h>
+ #include <linux/stat.h>
+-#endif
+ 
+ #endif
+ 
+-#if defined WIN32
+-#undef new
+-#endif
+ 
+ #endif
+--- a/fs/yaffs2/Kconfig
++++ b/fs/yaffs2/Kconfig
+@@ -5,7 +5,7 @@
+ config YAFFS_FS
+ 	tristate "YAFFS2 file system support"
+ 	default n
+-	depends on MTD
++	depends on MTD_BLOCK
+ 	select YAFFS_YAFFS1
+ 	select YAFFS_YAFFS2
+ 	help
+@@ -43,7 +43,8 @@ config YAFFS_9BYTE_TAGS
+ 	  format that you need to continue to support.  New data written
+ 	  also uses the older-style format.  Note: Use of this option
+ 	  generally requires that MTD's oob layout be adjusted to use the
+-	  older-style format.  See notes on tags formats and MTD versions.
++	  older-style format.  See notes on tags formats and MTD versions
++	  in yaffs_mtdif1.c.
+ 
+ 	  If unsure, say N.
+ 
+@@ -109,26 +110,6 @@ config YAFFS_DISABLE_LAZY_LOAD
+ 
+ 	  If unsure, say N.
+ 
+-config YAFFS_CHECKPOINT_RESERVED_BLOCKS
+-	int "Reserved blocks for checkpointing"
+-	depends on YAFFS_YAFFS2
+-	default 10
+-	help
+-          Give the number of Blocks to reserve for checkpointing.
+-	  Checkpointing saves the state at unmount so that mounting is
+-	  much faster as a scan of all the flash to regenerate this state
+-	  is not needed.  These Blocks are reserved per partition, so if
+-	  you have very small partitions the default (10) may be a mess
+-	  for you.  You can set this value to 0, but that does not mean
+-	  checkpointing is disabled at all. There only won't be any
+-	  specially reserved blocks for checkpointing, so if there is
+-	  enough free space on the filesystem, it will be used for
+-	  checkpointing.
+-
+-	  If unsure, leave at default (10), but don't wonder if there are
+-	  always 2MB used on your large page device partition (10 x 2k
+-	  pagesize). When using small partitions or when being very small
+-	  on space, you probably want to set this to zero.
+ 
+ config YAFFS_DISABLE_WIDE_TNODES
+ 	bool "Turn off wide tnodes"
+--- a/fs/yaffs2/Makefile
++++ b/fs/yaffs2/Makefile
+@@ -5,7 +5,6 @@
+ obj-$(CONFIG_YAFFS_FS) += yaffs.o
+ 
+ yaffs-y := yaffs_ecc.o yaffs_fs.o yaffs_guts.o yaffs_checkptrw.o
+-yaffs-y += yaffs_packedtags2.o yaffs_nand.o yaffs_qsort.o
++yaffs-y += yaffs_packedtags1.o yaffs_packedtags2.o yaffs_nand.o yaffs_qsort.o
+ yaffs-y += yaffs_tagscompat.o yaffs_tagsvalidity.o
+-yaffs-y += yaffs_mtdif1.o yaffs_packedtags1.o
+-yaffs-y += yaffs_mtdif.o yaffs_mtdif2.o
++yaffs-y += yaffs_mtdif.o yaffs_mtdif1.o yaffs_mtdif2.o
+--- a/fs/yaffs2/moduleconfig.h
++++ b/fs/yaffs2/moduleconfig.h
+@@ -27,12 +27,12 @@
+ 
+ /* Default: Not selected */
+ /* Meaning: Yaffs does its own ECC, rather than using MTD ECC */
+-//#define CONFIG_YAFFS_DOES_ECC
++/* #define CONFIG_YAFFS_DOES_ECC */
+ 
+ /* Default: Not selected */
+ /* Meaning: ECC byte order is 'wrong'.  Only meaningful if */
+ /*          CONFIG_YAFFS_DOES_ECC is set */
+-//#define CONFIG_YAFFS_ECC_WRONG_ORDER
++/* #define CONFIG_YAFFS_ECC_WRONG_ORDER */
+ 
+ /* Default: Selected */
+ /* Meaning: Disables testing whether chunks are erased before writing to them*/
+@@ -54,11 +54,11 @@ that you need to continue to support.  N
+ older-style format.
+ Note: Use of this option generally requires that MTD's oob layout be
+ adjusted to use the older-style format.  See notes on tags formats and
+-MTD versions.
++MTD versions in yaffs_mtdif1.c.
+ */
+ /* Default: Not selected */
+ /* Meaning: Use older-style on-NAND data format with pageStatus byte */
+-#define CONFIG_YAFFS_9BYTE_TAGS
++/* #define CONFIG_YAFFS_9BYTE_TAGS */
+ 
+ #endif /* YAFFS_OUT_OF_TREE */
+ 
+--- a/fs/yaffs2/yaffs_checkptrw.c
++++ b/fs/yaffs2/yaffs_checkptrw.c
+@@ -12,48 +12,43 @@
+  */
+ 
+ const char *yaffs_checkptrw_c_version =
+-    "$Id: yaffs_checkptrw.c,v 1.14 2007-05-15 20:07:40 charles Exp $";
++	"$Id: yaffs_checkptrw.c,v 1.18 2009-03-06 17:20:49 wookey Exp $";
+ 
+ 
+ #include "yaffs_checkptrw.h"
+-
++#include "yaffs_getblockinfo.h"
+ 
+ static int yaffs_CheckpointSpaceOk(yaffs_Device *dev)
+ {
+-
+ 	int blocksAvailable = dev->nErasedBlocks - dev->nReservedBlocks;
+ 
+ 	T(YAFFS_TRACE_CHECKPOINT,
+ 		(TSTR("checkpt blocks available = %d" TENDSTR),
+ 		blocksAvailable));
+ 
+-
+ 	return (blocksAvailable <= 0) ? 0 : 1;
+ }
+ 
+ 
+ static int yaffs_CheckpointErase(yaffs_Device *dev)
+ {
+-
+ 	int i;
+ 
+-
+-	if(!dev->eraseBlockInNAND)
++	if (!dev->eraseBlockInNAND)
+ 		return 0;
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("checking blocks %d to %d"TENDSTR),
+-		dev->internalStartBlock,dev->internalEndBlock));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("checking blocks %d to %d"TENDSTR),
++		dev->internalStartBlock, dev->internalEndBlock));
+ 
+-	for(i = dev->internalStartBlock; i <= dev->internalEndBlock; i++) {
+-		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,i);
+-		if(bi->blockState == YAFFS_BLOCK_STATE_CHECKPOINT){
+-			T(YAFFS_TRACE_CHECKPOINT,(TSTR("erasing checkpt block %d"TENDSTR),i));
+-			if(dev->eraseBlockInNAND(dev,i- dev->blockOffset /* realign */)){
++	for (i = dev->internalStartBlock; i <= dev->internalEndBlock; i++) {
++		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, i);
++		if (bi->blockState == YAFFS_BLOCK_STATE_CHECKPOINT) {
++			T(YAFFS_TRACE_CHECKPOINT, (TSTR("erasing checkpt block %d"TENDSTR), i));
++			if (dev->eraseBlockInNAND(dev, i - dev->blockOffset /* realign */)) {
+ 				bi->blockState = YAFFS_BLOCK_STATE_EMPTY;
+ 				dev->nErasedBlocks++;
+ 				dev->nFreeChunks += dev->nChunksPerBlock;
+-			}
+-			else {
+-				dev->markNANDBlockBad(dev,i);
++			} else {
++				dev->markNANDBlockBad(dev, i);
+ 				bi->blockState = YAFFS_BLOCK_STATE_DEAD;
+ 			}
+ 		}
+@@ -71,23 +66,23 @@ static void yaffs_CheckpointFindNextEras
+ 	int blocksAvailable = dev->nErasedBlocks - dev->nReservedBlocks;
+ 	T(YAFFS_TRACE_CHECKPOINT,
+ 		(TSTR("allocating checkpt block: erased %d reserved %d avail %d next %d "TENDSTR),
+-		dev->nErasedBlocks,dev->nReservedBlocks,blocksAvailable,dev->checkpointNextBlock));
++		dev->nErasedBlocks, dev->nReservedBlocks, blocksAvailable, dev->checkpointNextBlock));
+ 
+-	if(dev->checkpointNextBlock >= 0 &&
+-	   dev->checkpointNextBlock <= dev->internalEndBlock &&
+-	   blocksAvailable > 0){
+-
+-		for(i = dev->checkpointNextBlock; i <= dev->internalEndBlock; i++){
+-			yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,i);
+-			if(bi->blockState == YAFFS_BLOCK_STATE_EMPTY){
++	if (dev->checkpointNextBlock >= 0 &&
++			dev->checkpointNextBlock <= dev->internalEndBlock &&
++			blocksAvailable > 0) {
++
++		for (i = dev->checkpointNextBlock; i <= dev->internalEndBlock; i++) {
++			yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, i);
++			if (bi->blockState == YAFFS_BLOCK_STATE_EMPTY) {
+ 				dev->checkpointNextBlock = i + 1;
+ 				dev->checkpointCurrentBlock = i;
+-				T(YAFFS_TRACE_CHECKPOINT,(TSTR("allocating checkpt block %d"TENDSTR),i));
++				T(YAFFS_TRACE_CHECKPOINT, (TSTR("allocating checkpt block %d"TENDSTR), i));
+ 				return;
+ 			}
+ 		}
+ 	}
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("out of checkpt blocks"TENDSTR)));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("out of checkpt blocks"TENDSTR)));
+ 
+ 	dev->checkpointNextBlock = -1;
+ 	dev->checkpointCurrentBlock = -1;
+@@ -98,30 +93,31 @@ static void yaffs_CheckpointFindNextChec
+ 	int  i;
+ 	yaffs_ExtendedTags tags;
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("find next checkpt block: start:  blocks %d next %d" TENDSTR),
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("find next checkpt block: start:  blocks %d next %d" TENDSTR),
+ 		dev->blocksInCheckpoint, dev->checkpointNextBlock));
+ 
+-	if(dev->blocksInCheckpoint < dev->checkpointMaxBlocks)
+-		for(i = dev->checkpointNextBlock; i <= dev->internalEndBlock; i++){
++	if (dev->blocksInCheckpoint < dev->checkpointMaxBlocks)
++		for (i = dev->checkpointNextBlock; i <= dev->internalEndBlock; i++) {
+ 			int chunk = i * dev->nChunksPerBlock;
+ 			int realignedChunk = chunk - dev->chunkOffset;
+ 
+-			dev->readChunkWithTagsFromNAND(dev,realignedChunk,NULL,&tags);
+-			T(YAFFS_TRACE_CHECKPOINT,(TSTR("find next checkpt block: search: block %d oid %d seq %d eccr %d" TENDSTR),
+-				i, tags.objectId,tags.sequenceNumber,tags.eccResult));
++			dev->readChunkWithTagsFromNAND(dev, realignedChunk,
++					NULL, &tags);
++			T(YAFFS_TRACE_CHECKPOINT, (TSTR("find next checkpt block: search: block %d oid %d seq %d eccr %d" TENDSTR),
++				i, tags.objectId, tags.sequenceNumber, tags.eccResult));
+ 
+-			if(tags.sequenceNumber == YAFFS_SEQUENCE_CHECKPOINT_DATA){
++			if (tags.sequenceNumber == YAFFS_SEQUENCE_CHECKPOINT_DATA) {
+ 				/* Right kind of block */
+ 				dev->checkpointNextBlock = tags.objectId;
+ 				dev->checkpointCurrentBlock = i;
+ 				dev->checkpointBlockList[dev->blocksInCheckpoint] = i;
+ 				dev->blocksInCheckpoint++;
+-				T(YAFFS_TRACE_CHECKPOINT,(TSTR("found checkpt block %d"TENDSTR),i));
++				T(YAFFS_TRACE_CHECKPOINT, (TSTR("found checkpt block %d"TENDSTR), i));
+ 				return;
+ 			}
+ 		}
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("found no more checkpt blocks"TENDSTR)));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("found no more checkpt blocks"TENDSTR)));
+ 
+ 	dev->checkpointNextBlock = -1;
+ 	dev->checkpointCurrentBlock = -1;
+@@ -133,17 +129,17 @@ int yaffs_CheckpointOpen(yaffs_Device *d
+ 
+ 	/* Got the functions we need? */
+ 	if (!dev->writeChunkWithTagsToNAND ||
+-	    !dev->readChunkWithTagsFromNAND ||
+-	    !dev->eraseBlockInNAND ||
+-	    !dev->markNANDBlockBad)
++			!dev->readChunkWithTagsFromNAND ||
++			!dev->eraseBlockInNAND ||
++			!dev->markNANDBlockBad)
+ 		return 0;
+ 
+-	if(forWriting && !yaffs_CheckpointSpaceOk(dev))
++	if (forWriting && !yaffs_CheckpointSpaceOk(dev))
+ 		return 0;
+ 
+-	if(!dev->checkpointBuffer)
+-		dev->checkpointBuffer = YMALLOC_DMA(dev->nDataBytesPerChunk);
+-	if(!dev->checkpointBuffer)
++	if (!dev->checkpointBuffer)
++		dev->checkpointBuffer = YMALLOC_DMA(dev->totalBytesPerChunk);
++	if (!dev->checkpointBuffer)
+ 		return 0;
+ 
+ 
+@@ -159,12 +155,10 @@ int yaffs_CheckpointOpen(yaffs_Device *d
+ 	dev->checkpointNextBlock = dev->internalStartBlock;
+ 
+ 	/* Erase all the blocks in the checkpoint area */
+-	if(forWriting){
+-		memset(dev->checkpointBuffer,0,dev->nDataBytesPerChunk);
++	if (forWriting) {
++		memset(dev->checkpointBuffer, 0, dev->nDataBytesPerChunk);
+ 		dev->checkpointByteOffset = 0;
+ 		return yaffs_CheckpointErase(dev);
+-
+-
+ 	} else {
+ 		int i;
+ 		/* Set to a value that will kick off a read */
+@@ -174,7 +168,7 @@ int yaffs_CheckpointOpen(yaffs_Device *d
+ 		dev->blocksInCheckpoint = 0;
+ 		dev->checkpointMaxBlocks = (dev->internalEndBlock - dev->internalStartBlock)/16 + 2;
+ 		dev->checkpointBlockList = YMALLOC(sizeof(int) * dev->checkpointMaxBlocks);
+-		for(i = 0; i < dev->checkpointMaxBlocks; i++)
++		for (i = 0; i < dev->checkpointMaxBlocks; i++)
+ 			dev->checkpointBlockList[i] = -1;
+ 	}
+ 
+@@ -191,18 +185,17 @@ int yaffs_GetCheckpointSum(yaffs_Device
+ 
+ static int yaffs_CheckpointFlushBuffer(yaffs_Device *dev)
+ {
+-
+ 	int chunk;
+ 	int realignedChunk;
+ 
+ 	yaffs_ExtendedTags tags;
+ 
+-	if(dev->checkpointCurrentBlock < 0){
++	if (dev->checkpointCurrentBlock < 0) {
+ 		yaffs_CheckpointFindNextErasedBlock(dev);
+ 		dev->checkpointCurrentChunk = 0;
+ 	}
+ 
+-	if(dev->checkpointCurrentBlock < 0)
++	if (dev->checkpointCurrentBlock < 0)
+ 		return 0;
+ 
+ 	tags.chunkDeleted = 0;
+@@ -210,10 +203,10 @@ static int yaffs_CheckpointFlushBuffer(y
+ 	tags.chunkId = dev->checkpointPageSequence + 1;
+ 	tags.sequenceNumber =  YAFFS_SEQUENCE_CHECKPOINT_DATA;
+ 	tags.byteCount = dev->nDataBytesPerChunk;
+-	if(dev->checkpointCurrentChunk == 0){
++	if (dev->checkpointCurrentChunk == 0) {
+ 		/* First chunk we write for the block? Set block state to
+ 		   checkpoint */
+-		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,dev->checkpointCurrentBlock);
++		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, dev->checkpointCurrentBlock);
+ 		bi->blockState = YAFFS_BLOCK_STATE_CHECKPOINT;
+ 		dev->blocksInCheckpoint++;
+ 	}
+@@ -221,28 +214,29 @@ static int yaffs_CheckpointFlushBuffer(y
+ 	chunk = dev->checkpointCurrentBlock * dev->nChunksPerBlock + dev->checkpointCurrentChunk;
+ 
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("checkpoint wite buffer nand %d(%d:%d) objid %d chId %d" TENDSTR),
+-		chunk, dev->checkpointCurrentBlock, dev->checkpointCurrentChunk,tags.objectId,tags.chunkId));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("checkpoint wite buffer nand %d(%d:%d) objid %d chId %d" TENDSTR),
++		chunk, dev->checkpointCurrentBlock, dev->checkpointCurrentChunk, tags.objectId, tags.chunkId));
+ 
+ 	realignedChunk = chunk - dev->chunkOffset;
+ 
+-	dev->writeChunkWithTagsToNAND(dev,realignedChunk,dev->checkpointBuffer,&tags);
++	dev->writeChunkWithTagsToNAND(dev, realignedChunk,
++			dev->checkpointBuffer, &tags);
+ 	dev->checkpointByteOffset = 0;
+ 	dev->checkpointPageSequence++;
+ 	dev->checkpointCurrentChunk++;
+-	if(dev->checkpointCurrentChunk >= dev->nChunksPerBlock){
++	if (dev->checkpointCurrentChunk >= dev->nChunksPerBlock) {
+ 		dev->checkpointCurrentChunk = 0;
+ 		dev->checkpointCurrentBlock = -1;
+ 	}
+-	memset(dev->checkpointBuffer,0,dev->nDataBytesPerChunk);
++	memset(dev->checkpointBuffer, 0, dev->nDataBytesPerChunk);
+ 
+ 	return 1;
+ }
+ 
+ 
+-int yaffs_CheckpointWrite(yaffs_Device *dev,const void *data, int nBytes)
++int yaffs_CheckpointWrite(yaffs_Device *dev, const void *data, int nBytes)
+ {
+-	int i=0;
++	int i = 0;
+ 	int ok = 1;
+ 
+ 
+@@ -250,17 +244,14 @@ int yaffs_CheckpointWrite(yaffs_Device *
+ 
+ 
+ 
+-	if(!dev->checkpointBuffer)
++	if (!dev->checkpointBuffer)
+ 		return 0;
+ 
+-	if(!dev->checkpointOpenForWrite)
++	if (!dev->checkpointOpenForWrite)
+ 		return -1;
+ 
+-	while(i < nBytes && ok) {
+-
+-
+-
+-		dev->checkpointBuffer[dev->checkpointByteOffset] = *dataBytes ;
++	while (i < nBytes && ok) {
++		dev->checkpointBuffer[dev->checkpointByteOffset] = *dataBytes;
+ 		dev->checkpointSum += *dataBytes;
+ 		dev->checkpointXor ^= *dataBytes;
+ 
+@@ -270,18 +261,17 @@ int yaffs_CheckpointWrite(yaffs_Device *
+ 		dev->checkpointByteCount++;
+ 
+ 
+-		if(dev->checkpointByteOffset < 0 ||
++		if (dev->checkpointByteOffset < 0 ||
+ 		   dev->checkpointByteOffset >= dev->nDataBytesPerChunk)
+ 			ok = yaffs_CheckpointFlushBuffer(dev);
+-
+ 	}
+ 
+-	return 	i;
++	return i;
+ }
+ 
+ int yaffs_CheckpointRead(yaffs_Device *dev, void *data, int nBytes)
+ {
+-	int i=0;
++	int i = 0;
+ 	int ok = 1;
+ 	yaffs_ExtendedTags tags;
+ 
+@@ -291,52 +281,54 @@ int yaffs_CheckpointRead(yaffs_Device *d
+ 
+ 	__u8 *dataBytes = (__u8 *)data;
+ 
+-	if(!dev->checkpointBuffer)
++	if (!dev->checkpointBuffer)
+ 		return 0;
+ 
+-	if(dev->checkpointOpenForWrite)
++	if (dev->checkpointOpenForWrite)
+ 		return -1;
+ 
+-	while(i < nBytes && ok) {
++	while (i < nBytes && ok) {
+ 
+ 
+-		if(dev->checkpointByteOffset < 0 ||
+-		   dev->checkpointByteOffset >= dev->nDataBytesPerChunk) {
++		if (dev->checkpointByteOffset < 0 ||
++			dev->checkpointByteOffset >= dev->nDataBytesPerChunk) {
+ 
+-		   	if(dev->checkpointCurrentBlock < 0){
++			if (dev->checkpointCurrentBlock < 0) {
+ 				yaffs_CheckpointFindNextCheckpointBlock(dev);
+ 				dev->checkpointCurrentChunk = 0;
+ 			}
+ 
+-			if(dev->checkpointCurrentBlock < 0)
++			if (dev->checkpointCurrentBlock < 0)
+ 				ok = 0;
+ 			else {
+-
+-				chunk = dev->checkpointCurrentBlock * dev->nChunksPerBlock +
+-				          dev->checkpointCurrentChunk;
++				chunk = dev->checkpointCurrentBlock *
++					dev->nChunksPerBlock +
++					dev->checkpointCurrentChunk;
+ 
+ 				realignedChunk = chunk - dev->chunkOffset;
+ 
+-	   			/* read in the next chunk */
+-	   			/* printf("read checkpoint page %d\n",dev->checkpointPage); */
+-				dev->readChunkWithTagsFromNAND(dev, realignedChunk,
+-							       dev->checkpointBuffer,
+-							      &tags);
+-
+-				if(tags.chunkId != (dev->checkpointPageSequence + 1) ||
+-				   tags.sequenceNumber != YAFFS_SEQUENCE_CHECKPOINT_DATA)
+-				   ok = 0;
++				/* read in the next chunk */
++				/* printf("read checkpoint page %d\n",dev->checkpointPage); */
++				dev->readChunkWithTagsFromNAND(dev,
++						realignedChunk,
++						dev->checkpointBuffer,
++						&tags);
++
++				if (tags.chunkId != (dev->checkpointPageSequence + 1) ||
++					tags.eccResult > YAFFS_ECC_RESULT_FIXED ||
++					tags.sequenceNumber != YAFFS_SEQUENCE_CHECKPOINT_DATA)
++					ok = 0;
+ 
+ 				dev->checkpointByteOffset = 0;
+ 				dev->checkpointPageSequence++;
+ 				dev->checkpointCurrentChunk++;
+ 
+-				if(dev->checkpointCurrentChunk >= dev->nChunksPerBlock)
++				if (dev->checkpointCurrentChunk >= dev->nChunksPerBlock)
+ 					dev->checkpointCurrentBlock = -1;
+ 			}
+ 		}
+ 
+-		if(ok){
++		if (ok) {
+ 			*dataBytes = dev->checkpointBuffer[dev->checkpointByteOffset];
+ 			dev->checkpointSum += *dataBytes;
+ 			dev->checkpointXor ^= *dataBytes;
+@@ -353,17 +345,17 @@ int yaffs_CheckpointRead(yaffs_Device *d
+ int yaffs_CheckpointClose(yaffs_Device *dev)
+ {
+ 
+-	if(dev->checkpointOpenForWrite){
+-		if(dev->checkpointByteOffset != 0)
++	if (dev->checkpointOpenForWrite) {
++		if (dev->checkpointByteOffset != 0)
+ 			yaffs_CheckpointFlushBuffer(dev);
+ 	} else {
+ 		int i;
+-		for(i = 0; i < dev->blocksInCheckpoint && dev->checkpointBlockList[i] >= 0; i++){
+-			yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,dev->checkpointBlockList[i]);
+-			if(bi->blockState == YAFFS_BLOCK_STATE_EMPTY)
++		for (i = 0; i < dev->blocksInCheckpoint && dev->checkpointBlockList[i] >= 0; i++) {
++			yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, dev->checkpointBlockList[i]);
++			if (bi->blockState == YAFFS_BLOCK_STATE_EMPTY)
+ 				bi->blockState = YAFFS_BLOCK_STATE_CHECKPOINT;
+ 			else {
+-				// Todo this looks odd...
++				/* Todo this looks odd... */
+ 			}
+ 		}
+ 		YFREE(dev->checkpointBlockList);
+@@ -374,27 +366,25 @@ int yaffs_CheckpointClose(yaffs_Device *
+ 	dev->nErasedBlocks -= dev->blocksInCheckpoint;
+ 
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("checkpoint byte count %d" TENDSTR),
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("checkpoint byte count %d" TENDSTR),
+ 			dev->checkpointByteCount));
+ 
+-	if(dev->checkpointBuffer){
++	if (dev->checkpointBuffer) {
+ 		/* free the buffer */
+ 		YFREE(dev->checkpointBuffer);
+ 		dev->checkpointBuffer = NULL;
+ 		return 1;
+-	}
+-	else
++	} else
+ 		return 0;
+-
+ }
+ 
+ int yaffs_CheckpointInvalidateStream(yaffs_Device *dev)
+ {
+ 	/* Erase the first checksum block */
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("checkpoint invalidate"TENDSTR)));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("checkpoint invalidate"TENDSTR)));
+ 
+-	if(!yaffs_CheckpointSpaceOk(dev))
++	if (!yaffs_CheckpointSpaceOk(dev))
+ 		return 0;
+ 
+ 	return yaffs_CheckpointErase(dev);
+--- a/fs/yaffs2/yaffs_checkptrw.h
++++ b/fs/yaffs2/yaffs_checkptrw.h
+@@ -20,9 +20,9 @@
+ 
+ int yaffs_CheckpointOpen(yaffs_Device *dev, int forWriting);
+ 
+-int yaffs_CheckpointWrite(yaffs_Device *dev,const void *data, int nBytes);
++int yaffs_CheckpointWrite(yaffs_Device *dev, const void *data, int nBytes);
+ 
+-int yaffs_CheckpointRead(yaffs_Device *dev,void *data, int nBytes);
++int yaffs_CheckpointRead(yaffs_Device *dev, void *data, int nBytes);
+ 
+ int yaffs_GetCheckpointSum(yaffs_Device *dev, __u32 *sum);
+ 
+--- a/fs/yaffs2/yaffs_ecc.c
++++ b/fs/yaffs2/yaffs_ecc.c
+@@ -29,7 +29,7 @@
+  */
+ 
+ const char *yaffs_ecc_c_version =
+-    "$Id: yaffs_ecc.c,v 1.9 2007-02-14 01:09:06 wookey Exp $";
++	"$Id: yaffs_ecc.c,v 1.11 2009-03-06 17:20:50 wookey Exp $";
+ 
+ #include "yportenv.h"
+ 
+@@ -109,12 +109,10 @@ void yaffs_ECCCalculate(const unsigned c
+ 		b = column_parity_table[*data++];
+ 		col_parity ^= b;
+ 
+-		if (b & 0x01)	// odd number of bits in the byte
+-		{
++		if (b & 0x01) {		/* odd number of bits in the byte */
+ 			line_parity ^= i;
+ 			line_parity_prime ^= ~i;
+ 		}
+-
+ 	}
+ 
+ 	ecc[2] = (~col_parity) | 0x03;
+@@ -158,7 +156,7 @@ void yaffs_ECCCalculate(const unsigned c
+ 	ecc[0] = ~t;
+ 
+ #ifdef CONFIG_YAFFS_ECC_WRONG_ORDER
+-	// Swap the bytes into the wrong order
++	/* Swap the bytes into the wrong order */
+ 	t = ecc[0];
+ 	ecc[0] = ecc[1];
+ 	ecc[1] = t;
+@@ -189,7 +187,7 @@ int yaffs_ECCCorrect(unsigned char *data
+ 		unsigned bit;
+ 
+ #ifdef CONFIG_YAFFS_ECC_WRONG_ORDER
+-		// swap the bytes to correct for the wrong order
++		/* swap the bytes to correct for the wrong order */
+ 		unsigned char t;
+ 
+ 		t = d0;
+@@ -251,7 +249,7 @@ int yaffs_ECCCorrect(unsigned char *data
+  * ECCxxxOther does ECC calcs on arbitrary n bytes of data
+  */
+ void yaffs_ECCCalculateOther(const unsigned char *data, unsigned nBytes,
+-			     yaffs_ECCOther * eccOther)
++				yaffs_ECCOther *eccOther)
+ {
+ 	unsigned int i;
+ 
+@@ -278,8 +276,8 @@ void yaffs_ECCCalculateOther(const unsig
+ }
+ 
+ int yaffs_ECCCorrectOther(unsigned char *data, unsigned nBytes,
+-			  yaffs_ECCOther * read_ecc,
+-			  const yaffs_ECCOther * test_ecc)
++			yaffs_ECCOther *read_ecc,
++			const yaffs_ECCOther *test_ecc)
+ {
+ 	unsigned char cDelta;	/* column parity delta */
+ 	unsigned lDelta;	/* line parity delta */
+@@ -294,8 +292,7 @@ int yaffs_ECCCorrectOther(unsigned char
+ 		return 0; /* no error */
+ 
+ 	if (lDelta == ~lDeltaPrime &&
+-	    (((cDelta ^ (cDelta >> 1)) & 0x15) == 0x15))
+-	{
++	    (((cDelta ^ (cDelta >> 1)) & 0x15) == 0x15)) {
+ 		/* Single bit (recoverable) error in data */
+ 
+ 		bit = 0;
+@@ -307,7 +304,7 @@ int yaffs_ECCCorrectOther(unsigned char
+ 		if (cDelta & 0x02)
+ 			bit |= 0x01;
+ 
+-		if(lDelta >= nBytes)
++		if (lDelta >= nBytes)
+ 			return -1;
+ 
+ 		data[lDelta] ^= (1 << bit);
+@@ -316,7 +313,7 @@ int yaffs_ECCCorrectOther(unsigned char
+ 	}
+ 
+ 	if ((yaffs_CountBits32(lDelta) + yaffs_CountBits32(lDeltaPrime) +
+-	     yaffs_CountBits(cDelta)) == 1) {
++			yaffs_CountBits(cDelta)) == 1) {
+ 		/* Reccoverable error in ecc */
+ 
+ 		*read_ecc = *test_ecc;
+@@ -326,6 +323,4 @@ int yaffs_ECCCorrectOther(unsigned char
+ 	/* Unrecoverable error */
+ 
+ 	return -1;
+-
+ }
+-
+--- a/fs/yaffs2/yaffs_ecc.h
++++ b/fs/yaffs2/yaffs_ecc.h
+@@ -13,15 +13,15 @@
+  * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+  */
+ 
+- /*
+-  * This code implements the ECC algorithm used in SmartMedia.
+-  *
+-  * The ECC comprises 22 bits of parity information and is stuffed into 3 bytes.
+-  * The two unused bit are set to 1.
+-  * The ECC can correct single bit errors in a 256-byte page of data. Thus, two such ECC
+-  * blocks are used on a 512-byte NAND page.
+-  *
+-  */
++/*
++ * This code implements the ECC algorithm used in SmartMedia.
++ *
++ * The ECC comprises 22 bits of parity information and is stuffed into 3 bytes.
++ * The two unused bit are set to 1.
++ * The ECC can correct single bit errors in a 256-byte page of data. Thus, two such ECC
++ * blocks are used on a 512-byte NAND page.
++ *
++ */
+ 
+ #ifndef __YAFFS_ECC_H__
+ #define __YAFFS_ECC_H__
+@@ -34,11 +34,11 @@ typedef struct {
+ 
+ void yaffs_ECCCalculate(const unsigned char *data, unsigned char *ecc);
+ int yaffs_ECCCorrect(unsigned char *data, unsigned char *read_ecc,
+-		     const unsigned char *test_ecc);
++		const unsigned char *test_ecc);
+ 
+ void yaffs_ECCCalculateOther(const unsigned char *data, unsigned nBytes,
+-			     yaffs_ECCOther * ecc);
++			yaffs_ECCOther *ecc);
+ int yaffs_ECCCorrectOther(unsigned char *data, unsigned nBytes,
+-			  yaffs_ECCOther * read_ecc,
+-			  const yaffs_ECCOther * test_ecc);
++			yaffs_ECCOther *read_ecc,
++			const yaffs_ECCOther *test_ecc);
+ #endif
+--- a/fs/yaffs2/yaffs_fs.c
++++ b/fs/yaffs2/yaffs_fs.c
+@@ -1,7 +1,7 @@
+ /*
+  * YAFFS: Yet Another Flash File System. A NAND-flash specific file system.
+  *
+- * Copyright (C) 2002-2007 Aleph One Ltd.
++ * Copyright (C) 2002-2009 Aleph One Ltd.
+  *   for Toby Churchill Ltd and Brightstar Engineering
+  *
+  * Created by Charles Manning <charles@aleph1.co.uk>
+@@ -32,18 +32,17 @@
+  */
+ 
+ const char *yaffs_fs_c_version =
+-    "$Id: yaffs_fs.c,v 1.63 2007-09-19 20:35:40 imcd Exp $";
++    "$Id: yaffs_fs.c,v 1.79 2009-03-17 01:12:00 wookey Exp $";
+ extern const char *yaffs_guts_c_version;
+ 
+ #include <linux/version.h>
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19))
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 19))
+ #include <linux/config.h>
+ #endif
+ #include <linux/kernel.h>
+ #include <linux/module.h>
+ #include <linux/slab.h>
+ #include <linux/init.h>
+-#include <linux/list.h>
+ #include <linux/fs.h>
+ #include <linux/proc_fs.h>
+ #include <linux/smp_lock.h>
+@@ -53,10 +52,12 @@ extern const char *yaffs_guts_c_version;
+ #include <linux/string.h>
+ #include <linux/ctype.h>
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#include "asm/div64.h"
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 
+ #include <linux/statfs.h>	/* Added NCB 15-8-2003 */
+-#include <asm/statfs.h>
++#include <linux/statfs.h>
+ #define UnlockPage(p) unlock_page(p)
+ #define Page_Uptodate(page)	test_bit(PG_uptodate, &(page)->flags)
+ 
+@@ -69,22 +70,45 @@ extern const char *yaffs_guts_c_version;
+ #define	BDEVNAME_SIZE		0
+ #define	yaffs_devname(sb, buf)	kdevname(sb->s_dev)
+ 
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 5, 0))
+ /* added NCB 26/5/2006 for 2.4.25-vrs2-tcl1 kernel */
+ #define __user
+ #endif
+ 
+ #endif
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 26))
++#define YPROC_ROOT  (&proc_root)
++#else
++#define YPROC_ROOT  NULL
++#endif
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ #define WRITE_SIZE_STR "writesize"
+-#define WRITE_SIZE(mtd) (mtd)->writesize
++#define WRITE_SIZE(mtd) ((mtd)->writesize)
+ #else
+ #define WRITE_SIZE_STR "oobblock"
+-#define WRITE_SIZE(mtd) (mtd)->oobblock
++#define WRITE_SIZE(mtd) ((mtd)->oobblock)
+ #endif
+ 
+-#include <asm/uaccess.h>
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 27))
++#define YAFFS_USE_WRITE_BEGIN_END 1
++#else
++#define YAFFS_USE_WRITE_BEGIN_END 0
++#endif
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 28))
++static uint32_t YCALCBLOCKS(uint64_t partition_size, uint32_t block_size)
++{
++	uint64_t result = partition_size;
++	do_div(result, block_size);
++	return (uint32_t)result;
++}
++#else
++#define YCALCBLOCKS(s, b) ((s)/(b))
++#endif
++
++#include <linux/uaccess.h>
+ 
+ #include "yportenv.h"
+ #include "yaffs_guts.h"
+@@ -96,28 +120,44 @@ extern const char *yaffs_guts_c_version;
+ 
+ unsigned int yaffs_traceMask = YAFFS_TRACE_BAD_BLOCKS;
+ unsigned int yaffs_wr_attempts = YAFFS_WR_ATTEMPTS;
++unsigned int yaffs_auto_checkpoint = 1;
+ 
+ /* Module Parameters */
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+-module_param(yaffs_traceMask,uint,0644);
+-module_param(yaffs_wr_attempts,uint,0644);
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
++module_param(yaffs_traceMask, uint, 0644);
++module_param(yaffs_wr_attempts, uint, 0644);
++module_param(yaffs_auto_checkpoint, uint, 0644);
++#else
++MODULE_PARM(yaffs_traceMask, "i");
++MODULE_PARM(yaffs_wr_attempts, "i");
++MODULE_PARM(yaffs_auto_checkpoint, "i");
++#endif
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 25))
++/* use iget and read_inode */
++#define Y_IGET(sb, inum) iget((sb), (inum))
++static void yaffs_read_inode(struct inode *inode);
++
+ #else
+-MODULE_PARM(yaffs_traceMask,"i");
+-MODULE_PARM(yaffs_wr_attempts,"i");
++/* Call local equivalent */
++#define YAFFS_USE_OWN_IGET
++#define Y_IGET(sb, inum) yaffs_iget((sb), (inum))
++
++static struct inode *yaffs_iget(struct super_block *sb, unsigned long ino);
+ #endif
+ 
+ /*#define T(x) printk x */
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18))
+-#define yaffs_InodeToObjectLV(iptr) (iptr)->i_private
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 18))
++#define yaffs_InodeToObjectLV(iptr) ((iptr)->i_private)
+ #else
+-#define yaffs_InodeToObjectLV(iptr) (iptr)->u.generic_ip
++#define yaffs_InodeToObjectLV(iptr) ((iptr)->u.generic_ip)
+ #endif
+ 
+ #define yaffs_InodeToObject(iptr) ((yaffs_Object *)(yaffs_InodeToObjectLV(iptr)))
+ #define yaffs_DentryToObject(dptr) yaffs_InodeToObject((dptr)->d_inode)
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ #define yaffs_SuperToDevice(sb)	((yaffs_Device *)sb->s_fs_info)
+ #else
+ #define yaffs_SuperToDevice(sb)	((yaffs_Device *)sb->u.generic_sbp)
+@@ -126,47 +166,49 @@ MODULE_PARM(yaffs_wr_attempts,"i");
+ static void yaffs_put_super(struct super_block *sb);
+ 
+ static ssize_t yaffs_file_write(struct file *f, const char *buf, size_t n,
+-				loff_t * pos);
++				loff_t *pos);
++static ssize_t yaffs_hold_space(struct file *f);
++static void yaffs_release_space(struct file *f);
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_file_flush(struct file *file, fl_owner_t id);
+ #else
+ static int yaffs_file_flush(struct file *file);
+ #endif
+ 
+ static int yaffs_sync_object(struct file *file, struct dentry *dentry,
+-			     int datasync);
++				int datasync);
+ 
+ static int yaffs_readdir(struct file *f, void *dirent, filldir_t filldir);
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode,
+ 			struct nameidata *n);
+ static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry,
+-				   struct nameidata *n);
++					struct nameidata *n);
+ #else
+ static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode);
+ static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry);
+ #endif
+ static int yaffs_link(struct dentry *old_dentry, struct inode *dir,
+-		      struct dentry *dentry);
++			struct dentry *dentry);
+ static int yaffs_unlink(struct inode *dir, struct dentry *dentry);
+ static int yaffs_symlink(struct inode *dir, struct dentry *dentry,
+-			 const char *symname);
++			const char *symname);
+ static int yaffs_mkdir(struct inode *dir, struct dentry *dentry, int mode);
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode,
+-		       dev_t dev);
++			dev_t dev);
+ #else
+ static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode,
+-		       int dev);
++			int dev);
+ #endif
+ static int yaffs_rename(struct inode *old_dir, struct dentry *old_dentry,
+ 			struct inode *new_dir, struct dentry *new_dentry);
+ static int yaffs_setattr(struct dentry *dentry, struct iattr *attr);
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_sync_fs(struct super_block *sb, int wait);
+ static void yaffs_write_super(struct super_block *sb);
+ #else
+@@ -174,33 +216,47 @@ static int yaffs_sync_fs(struct super_bl
+ static int yaffs_write_super(struct super_block *sb);
+ #endif
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_statfs(struct dentry *dentry, struct kstatfs *buf);
+-#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_statfs(struct super_block *sb, struct kstatfs *buf);
+ #else
+ static int yaffs_statfs(struct super_block *sb, struct statfs *buf);
+ #endif
+-static void yaffs_read_inode(struct inode *inode);
+ 
++#ifdef YAFFS_HAS_PUT_INODE
+ static void yaffs_put_inode(struct inode *inode);
++#endif
++
+ static void yaffs_delete_inode(struct inode *);
+ static void yaffs_clear_inode(struct inode *);
+ 
+ static int yaffs_readpage(struct file *file, struct page *page);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_writepage(struct page *page, struct writeback_control *wbc);
+ #else
+ static int yaffs_writepage(struct page *page);
+ #endif
++
++
++#if (YAFFS_USE_WRITE_BEGIN_END != 0)
++static int yaffs_write_begin(struct file *filp, struct address_space *mapping,
++				loff_t pos, unsigned len, unsigned flags,
++				struct page **pagep, void **fsdata);
++static int yaffs_write_end(struct file *filp, struct address_space *mapping,
++				loff_t pos, unsigned len, unsigned copied,
++				struct page *pg, void *fsdadata);
++#else
+ static int yaffs_prepare_write(struct file *f, struct page *pg,
+-			       unsigned offset, unsigned to);
++				unsigned offset, unsigned to);
+ static int yaffs_commit_write(struct file *f, struct page *pg, unsigned offset,
+-			      unsigned to);
++				unsigned to);
+ 
+-static int yaffs_readlink(struct dentry *dentry, char __user * buffer,
+-			  int buflen);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
++#endif
++
++static int yaffs_readlink(struct dentry *dentry, char __user *buffer,
++				int buflen);
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 13))
+ static void *yaffs_follow_link(struct dentry *dentry, struct nameidata *nd);
+ #else
+ static int yaffs_follow_link(struct dentry *dentry, struct nameidata *nd);
+@@ -209,12 +265,17 @@ static int yaffs_follow_link(struct dent
+ static struct address_space_operations yaffs_file_address_operations = {
+ 	.readpage = yaffs_readpage,
+ 	.writepage = yaffs_writepage,
++#if (YAFFS_USE_WRITE_BEGIN_END > 0)
++	.write_begin = yaffs_write_begin,
++	.write_end = yaffs_write_end,
++#else
+ 	.prepare_write = yaffs_prepare_write,
+ 	.commit_write = yaffs_commit_write,
++#endif
+ };
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,22))
+-static struct file_operations yaffs_file_operations = {
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 22))
++static const struct file_operations yaffs_file_operations = {
+ 	.read = do_sync_read,
+ 	.write = do_sync_write,
+ 	.aio_read = generic_file_aio_read,
+@@ -224,11 +285,12 @@ static struct file_operations yaffs_file
+ 	.fsync = yaffs_sync_object,
+ 	.splice_read = generic_file_splice_read,
+ 	.splice_write = generic_file_splice_write,
++	.llseek = generic_file_llseek,
+ };
+ 
+-#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18))
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 18))
+ 
+-static struct file_operations yaffs_file_operations = {
++static const struct file_operations yaffs_file_operations = {
+ 	.read = do_sync_read,
+ 	.write = do_sync_write,
+ 	.aio_read = generic_file_aio_read,
+@@ -241,29 +303,29 @@ static struct file_operations yaffs_file
+ 
+ #else
+ 
+-static struct file_operations yaffs_file_operations = {
++static const struct file_operations yaffs_file_operations = {
+ 	.read = generic_file_read,
+ 	.write = generic_file_write,
+ 	.mmap = generic_file_mmap,
+ 	.flush = yaffs_file_flush,
+ 	.fsync = yaffs_sync_object,
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 	.sendfile = generic_file_sendfile,
+ #endif
+ };
+ #endif
+ 
+-static struct inode_operations yaffs_file_inode_operations = {
++static const struct inode_operations yaffs_file_inode_operations = {
+ 	.setattr = yaffs_setattr,
+ };
+ 
+-static struct inode_operations yaffs_symlink_inode_operations = {
++static const struct inode_operations yaffs_symlink_inode_operations = {
+ 	.readlink = yaffs_readlink,
+ 	.follow_link = yaffs_follow_link,
+ 	.setattr = yaffs_setattr,
+ };
+ 
+-static struct inode_operations yaffs_dir_inode_operations = {
++static const struct inode_operations yaffs_dir_inode_operations = {
+ 	.create = yaffs_create,
+ 	.lookup = yaffs_lookup,
+ 	.link = yaffs_link,
+@@ -276,16 +338,21 @@ static struct inode_operations yaffs_dir
+ 	.setattr = yaffs_setattr,
+ };
+ 
+-static struct file_operations yaffs_dir_operations = {
++static const struct file_operations yaffs_dir_operations = {
+ 	.read = generic_read_dir,
+ 	.readdir = yaffs_readdir,
+ 	.fsync = yaffs_sync_object,
+ };
+ 
+-static struct super_operations yaffs_super_ops = {
++static const struct super_operations yaffs_super_ops = {
+ 	.statfs = yaffs_statfs,
++
++#ifndef YAFFS_USE_OWN_IGET
+ 	.read_inode = yaffs_read_inode,
++#endif
++#ifdef YAFFS_HAS_PUT_INODE
+ 	.put_inode = yaffs_put_inode,
++#endif
+ 	.put_super = yaffs_put_super,
+ 	.delete_inode = yaffs_delete_inode,
+ 	.clear_inode = yaffs_clear_inode,
+@@ -293,22 +360,21 @@ static struct super_operations yaffs_sup
+ 	.write_super = yaffs_write_super,
+ };
+ 
+-static void yaffs_GrossLock(yaffs_Device * dev)
++static void yaffs_GrossLock(yaffs_Device *dev)
+ {
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs locking\n"));
+-
++	T(YAFFS_TRACE_OS, ("yaffs locking %p\n", current));
+ 	down(&dev->grossLock);
++	T(YAFFS_TRACE_OS, ("yaffs locked %p\n", current));
+ }
+ 
+-static void yaffs_GrossUnlock(yaffs_Device * dev)
++static void yaffs_GrossUnlock(yaffs_Device *dev)
+ {
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs unlocking\n"));
++	T(YAFFS_TRACE_OS, ("yaffs unlocking %p\n", current));
+ 	up(&dev->grossLock);
+-
+ }
+ 
+-static int yaffs_readlink(struct dentry *dentry, char __user * buffer,
+-			  int buflen)
++static int yaffs_readlink(struct dentry *dentry, char __user *buffer,
++			int buflen)
+ {
+ 	unsigned char *alias;
+ 	int ret;
+@@ -329,7 +395,7 @@ static int yaffs_readlink(struct dentry
+ 	return ret;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 13))
+ static void *yaffs_follow_link(struct dentry *dentry, struct nameidata *nd)
+ #else
+ static int yaffs_follow_link(struct dentry *dentry, struct nameidata *nd)
+@@ -345,32 +411,31 @@ static int yaffs_follow_link(struct dent
+ 
+ 	yaffs_GrossUnlock(dev);
+ 
+-	if (!alias)
+-        {
++	if (!alias) {
+ 		ret = -ENOMEM;
+ 		goto out;
+-        }
++	}
+ 
+ 	ret = vfs_follow_link(nd, alias);
+ 	kfree(alias);
+ out:
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
+-	return ERR_PTR (ret);
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 13))
++	return ERR_PTR(ret);
+ #else
+ 	return ret;
+ #endif
+ }
+ 
+ struct inode *yaffs_get_inode(struct super_block *sb, int mode, int dev,
+-			      yaffs_Object * obj);
++				yaffs_Object *obj);
+ 
+ /*
+  * Lookup is used to find objects in the fs
+  */
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 
+ static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry,
+-				   struct nameidata *n)
++				struct nameidata *n)
+ #else
+ static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry)
+ #endif
+@@ -383,12 +448,11 @@ static struct dentry *yaffs_lookup(struc
+ 	yaffs_GrossLock(dev);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_lookup for %d:%s\n",
+-	   yaffs_InodeToObject(dir)->objectId, dentry->d_name.name));
++		("yaffs_lookup for %d:%s\n",
++		yaffs_InodeToObject(dir)->objectId, dentry->d_name.name));
+ 
+-	obj =
+-	    yaffs_FindObjectByName(yaffs_InodeToObject(dir),
+-				   dentry->d_name.name);
++	obj = yaffs_FindObjectByName(yaffs_InodeToObject(dir),
++					dentry->d_name.name);
+ 
+ 	obj = yaffs_GetEquivalentObject(obj);	/* in case it was a hardlink */
+ 
+@@ -397,13 +461,13 @@ static struct dentry *yaffs_lookup(struc
+ 
+ 	if (obj) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_lookup found %d\n", obj->objectId));
++			("yaffs_lookup found %d\n", obj->objectId));
+ 
+ 		inode = yaffs_get_inode(dir->i_sb, obj->yst_mode, 0, obj);
+ 
+ 		if (inode) {
+ 			T(YAFFS_TRACE_OS,
+-			  (KERN_DEBUG "yaffs_loookup dentry \n"));
++				("yaffs_loookup dentry \n"));
+ /* #if 0 asserted by NCB for 2.5/6 compatability - falls through to
+  * d_add even if NULL inode */
+ #if 0
+@@ -416,7 +480,7 @@ static struct dentry *yaffs_lookup(struc
+ 		}
+ 
+ 	} else {
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_lookup not found\n"));
++		T(YAFFS_TRACE_OS, ("yaffs_lookup not found\n"));
+ 
+ 	}
+ 
+@@ -425,20 +489,22 @@ static struct dentry *yaffs_lookup(struc
+ 	d_add(dentry, inode);
+ 
+ 	return NULL;
+-	/*      return (ERR_PTR(-EIO)); */
+-
+ }
+ 
++
++#ifdef YAFFS_HAS_PUT_INODE
++
+ /* For now put inode is just for debugging
+  * Put inode is called when the inode **structure** is put.
+  */
+ static void yaffs_put_inode(struct inode *inode)
+ {
+ 	T(YAFFS_TRACE_OS,
+-	  ("yaffs_put_inode: ino %d, count %d\n", (int)inode->i_ino,
+-	   atomic_read(&inode->i_count)));
++		("yaffs_put_inode: ino %d, count %d\n", (int)inode->i_ino,
++		atomic_read(&inode->i_count)));
+ 
+ }
++#endif
+ 
+ /* clear is called to tell the fs to release any per-inode data it holds */
+ static void yaffs_clear_inode(struct inode *inode)
+@@ -449,9 +515,9 @@ static void yaffs_clear_inode(struct ino
+ 	obj = yaffs_InodeToObject(inode);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  ("yaffs_clear_inode: ino %d, count %d %s\n", (int)inode->i_ino,
+-	   atomic_read(&inode->i_count),
+-	   obj ? "object exists" : "null object"));
++		("yaffs_clear_inode: ino %d, count %d %s\n", (int)inode->i_ino,
++		atomic_read(&inode->i_count),
++		obj ? "object exists" : "null object"));
+ 
+ 	if (obj) {
+ 		dev = obj->myDev;
+@@ -486,23 +552,23 @@ static void yaffs_delete_inode(struct in
+ 	yaffs_Device *dev;
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  ("yaffs_delete_inode: ino %d, count %d %s\n", (int)inode->i_ino,
+-	   atomic_read(&inode->i_count),
+-	   obj ? "object exists" : "null object"));
++		("yaffs_delete_inode: ino %d, count %d %s\n", (int)inode->i_ino,
++		atomic_read(&inode->i_count),
++		obj ? "object exists" : "null object"));
+ 
+ 	if (obj) {
+ 		dev = obj->myDev;
+ 		yaffs_GrossLock(dev);
+-		yaffs_DeleteFile(obj);
++		yaffs_DeleteObject(obj);
+ 		yaffs_GrossUnlock(dev);
+ 	}
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
+-        truncate_inode_pages (&inode->i_data, 0);
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 13))
++	truncate_inode_pages(&inode->i_data, 0);
+ #endif
+ 	clear_inode(inode);
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_file_flush(struct file *file, fl_owner_t id)
+ #else
+ static int yaffs_file_flush(struct file *file)
+@@ -513,8 +579,8 @@ static int yaffs_file_flush(struct file
+ 	yaffs_Device *dev = obj->myDev;
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_file_flush object %d (%s)\n", obj->objectId,
+-	   obj->dirty ? "dirty" : "clean"));
++		("yaffs_file_flush object %d (%s)\n", obj->objectId,
++		obj->dirty ? "dirty" : "clean"));
+ 
+ 	yaffs_GrossLock(dev);
+ 
+@@ -535,15 +601,15 @@ static int yaffs_readpage_nolock(struct
+ 
+ 	yaffs_Device *dev;
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_readpage at %08x, size %08x\n",
+-			   (unsigned)(pg->index << PAGE_CACHE_SHIFT),
+-			   (unsigned)PAGE_CACHE_SIZE));
++	T(YAFFS_TRACE_OS, ("yaffs_readpage at %08x, size %08x\n",
++			(unsigned)(pg->index << PAGE_CACHE_SHIFT),
++			(unsigned)PAGE_CACHE_SIZE));
+ 
+ 	obj = yaffs_DentryToObject(f->f_dentry);
+ 
+ 	dev = obj->myDev;
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 	BUG_ON(!PageLocked(pg));
+ #else
+ 	if (!PageLocked(pg))
+@@ -555,9 +621,9 @@ static int yaffs_readpage_nolock(struct
+ 
+ 	yaffs_GrossLock(dev);
+ 
+-	ret =
+-	    yaffs_ReadDataFromFile(obj, pg_buf, pg->index << PAGE_CACHE_SHIFT,
+-				   PAGE_CACHE_SIZE);
++	ret = yaffs_ReadDataFromFile(obj, pg_buf,
++				pg->index << PAGE_CACHE_SHIFT,
++				PAGE_CACHE_SIZE);
+ 
+ 	yaffs_GrossUnlock(dev);
+ 
+@@ -575,7 +641,7 @@ static int yaffs_readpage_nolock(struct
+ 	flush_dcache_page(pg);
+ 	kunmap(pg);
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_readpage done\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_readpage done\n"));
+ 	return ret;
+ }
+ 
+@@ -593,7 +659,7 @@ static int yaffs_readpage(struct file *f
+ 
+ /* writepage inspired by/stolen from smbfs */
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_writepage(struct page *page, struct writeback_control *wbc)
+ #else
+ static int yaffs_writepage(struct page *page)
+@@ -616,12 +682,11 @@ static int yaffs_writepage(struct page *
+ 
+ 	if (offset > inode->i_size) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG
+-		   "yaffs_writepage at %08x, inode size = %08x!!!\n",
+-		   (unsigned)(page->index << PAGE_CACHE_SHIFT),
+-		   (unsigned)inode->i_size));
++			("yaffs_writepage at %08x, inode size = %08x!!!\n",
++			(unsigned)(page->index << PAGE_CACHE_SHIFT),
++			(unsigned)inode->i_size));
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "                -> don't care!!\n"));
++			("                -> don't care!!\n"));
+ 		unlock_page(page);
+ 		return 0;
+ 	}
+@@ -629,11 +694,10 @@ static int yaffs_writepage(struct page *
+ 	end_index = inode->i_size >> PAGE_CACHE_SHIFT;
+ 
+ 	/* easy case */
+-	if (page->index < end_index) {
++	if (page->index < end_index)
+ 		nBytes = PAGE_CACHE_SIZE;
+-	} else {
++	else
+ 		nBytes = inode->i_size & (PAGE_CACHE_SIZE - 1);
+-	}
+ 
+ 	get_page(page);
+ 
+@@ -643,19 +707,18 @@ static int yaffs_writepage(struct page *
+ 	yaffs_GrossLock(obj->myDev);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_writepage at %08x, size %08x\n",
+-	   (unsigned)(page->index << PAGE_CACHE_SHIFT), nBytes));
++		("yaffs_writepage at %08x, size %08x\n",
++		(unsigned)(page->index << PAGE_CACHE_SHIFT), nBytes));
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "writepag0: obj = %05x, ino = %05x\n",
+-	   (int)obj->variant.fileVariant.fileSize, (int)inode->i_size));
++		("writepag0: obj = %05x, ino = %05x\n",
++		(int)obj->variant.fileVariant.fileSize, (int)inode->i_size));
+ 
+-	nWritten =
+-	    yaffs_WriteDataToFile(obj, buffer, page->index << PAGE_CACHE_SHIFT,
+-				  nBytes, 0);
++	nWritten = yaffs_WriteDataToFile(obj, buffer,
++			page->index << PAGE_CACHE_SHIFT, nBytes, 0);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "writepag1: obj = %05x, ino = %05x\n",
+-	   (int)obj->variant.fileVariant.fileSize, (int)inode->i_size));
++		("writepag1: obj = %05x, ino = %05x\n",
++		(int)obj->variant.fileVariant.fileSize, (int)inode->i_size));
+ 
+ 	yaffs_GrossUnlock(obj->myDev);
+ 
+@@ -667,100 +730,207 @@ static int yaffs_writepage(struct page *
+ 	return (nWritten == nBytes) ? 0 : -ENOSPC;
+ }
+ 
++
++#if (YAFFS_USE_WRITE_BEGIN_END > 0)
++static int yaffs_write_begin(struct file *filp, struct address_space *mapping,
++				loff_t pos, unsigned len, unsigned flags,
++				struct page **pagep, void **fsdata)
++{
++	struct page *pg = NULL;
++	pgoff_t index = pos >> PAGE_CACHE_SHIFT;
++	uint32_t offset = pos & (PAGE_CACHE_SIZE - 1);
++	uint32_t to = offset + len;
++
++	int ret = 0;
++	int space_held = 0;
++
++	T(YAFFS_TRACE_OS, ("start yaffs_write_begin\n"));
++	/* Get a page */
++#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 28)
++	pg = grab_cache_page_write_begin(mapping, index, flags);
++#else
++	pg = __grab_cache_page(mapping, index);
++#endif
++
++	*pagep = pg;
++	if (!pg) {
++		ret =  -ENOMEM;
++		goto out;
++	}
++	/* Get fs space */
++	space_held = yaffs_hold_space(filp);
++
++	if (!space_held) {
++		ret = -ENOSPC;
++		goto out;
++	}
++
++	/* Update page if required */
++
++	if (!Page_Uptodate(pg) && (offset || to < PAGE_CACHE_SIZE))
++		ret = yaffs_readpage_nolock(filp, pg);
++
++	if (ret)
++		goto out;
++
++	/* Happy path return */
++	T(YAFFS_TRACE_OS, ("end yaffs_write_begin - ok\n"));
++
++	return 0;
++
++out:
++	T(YAFFS_TRACE_OS, ("end yaffs_write_begin fail returning %d\n", ret));
++	if (space_held)
++		yaffs_release_space(filp);
++	if (pg) {
++		unlock_page(pg);
++		page_cache_release(pg);
++	}
++	return ret;
++}
++
++#else
++
+ static int yaffs_prepare_write(struct file *f, struct page *pg,
+-			       unsigned offset, unsigned to)
++				unsigned offset, unsigned to)
+ {
++	T(YAFFS_TRACE_OS, ("yaffs_prepair_write\n"));
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_prepair_write\n"));
+ 	if (!Page_Uptodate(pg) && (offset || to < PAGE_CACHE_SIZE))
+ 		return yaffs_readpage_nolock(f, pg);
+-
+ 	return 0;
++}
++#endif
++
++#if (YAFFS_USE_WRITE_BEGIN_END > 0)
++static int yaffs_write_end(struct file *filp, struct address_space *mapping,
++				loff_t pos, unsigned len, unsigned copied,
++				struct page *pg, void *fsdadata)
++{
++	int ret = 0;
++	void *addr, *kva;
++	uint32_t offset_into_page = pos & (PAGE_CACHE_SIZE - 1);
++
++	kva = kmap(pg);
++	addr = kva + offset_into_page;
++
++	T(YAFFS_TRACE_OS,
++		("yaffs_write_end addr %x pos %x nBytes %d\n",
++		(unsigned) addr,
++		(int)pos, copied));
++
++	ret = yaffs_file_write(filp, addr, copied, &pos);
++
++	if (ret != copied) {
++		T(YAFFS_TRACE_OS,
++			("yaffs_write_end not same size ret %d  copied %d\n",
++			ret, copied));
++		SetPageError(pg);
++		ClearPageUptodate(pg);
++	} else {
++		SetPageUptodate(pg);
++	}
++
++	kunmap(pg);
+ 
++	yaffs_release_space(filp);
++	unlock_page(pg);
++	page_cache_release(pg);
++	return ret;
+ }
++#else
+ 
+ static int yaffs_commit_write(struct file *f, struct page *pg, unsigned offset,
+-			      unsigned to)
++				unsigned to)
+ {
++	void *addr, *kva;
+ 
+-	void *addr = page_address(pg) + offset;
+ 	loff_t pos = (((loff_t) pg->index) << PAGE_CACHE_SHIFT) + offset;
+ 	int nBytes = to - offset;
+ 	int nWritten;
+ 
+ 	unsigned spos = pos;
+-	unsigned saddr = (unsigned)addr;
++	unsigned saddr;
++
++	kva = kmap(pg);
++	addr = kva + offset;
++
++	saddr = (unsigned) addr;
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_commit_write addr %x pos %x nBytes %d\n", saddr,
+-	   spos, nBytes));
++		("yaffs_commit_write addr %x pos %x nBytes %d\n",
++		saddr, spos, nBytes));
+ 
+ 	nWritten = yaffs_file_write(f, addr, nBytes, &pos);
+ 
+ 	if (nWritten != nBytes) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG
+-		   "yaffs_commit_write not same size nWritten %d  nBytes %d\n",
+-		   nWritten, nBytes));
++			("yaffs_commit_write not same size nWritten %d  nBytes %d\n",
++			nWritten, nBytes));
+ 		SetPageError(pg);
+ 		ClearPageUptodate(pg);
+ 	} else {
+ 		SetPageUptodate(pg);
+ 	}
+ 
++	kunmap(pg);
++
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_commit_write returning %d\n",
+-	   nWritten == nBytes ? 0 : nWritten));
++		("yaffs_commit_write returning %d\n",
++		nWritten == nBytes ? 0 : nWritten));
+ 
+ 	return nWritten == nBytes ? 0 : nWritten;
+-
+ }
++#endif
++
+ 
+-static void yaffs_FillInodeFromObject(struct inode *inode, yaffs_Object * obj)
++static void yaffs_FillInodeFromObject(struct inode *inode, yaffs_Object *obj)
+ {
+ 	if (inode && obj) {
+ 
+ 
+ 		/* Check mode against the variant type and attempt to repair if broken. */
+- 		__u32 mode = obj->yst_mode;
+- 		switch( obj->variantType ){
+- 		case YAFFS_OBJECT_TYPE_FILE :
+- 		        if( ! S_ISREG(mode) ){
+- 			        obj->yst_mode &= ~S_IFMT;
+- 			        obj->yst_mode |= S_IFREG;
+- 			}
+-
+- 			break;
+- 		case YAFFS_OBJECT_TYPE_SYMLINK :
+- 		        if( ! S_ISLNK(mode) ){
+- 			        obj->yst_mode &= ~S_IFMT;
+- 				obj->yst_mode |= S_IFLNK;
+- 			}
+-
+- 			break;
+- 		case YAFFS_OBJECT_TYPE_DIRECTORY :
+- 		        if( ! S_ISDIR(mode) ){
+- 			        obj->yst_mode &= ~S_IFMT;
+- 			        obj->yst_mode |= S_IFDIR;
+- 			}
+-
+- 			break;
+- 		case YAFFS_OBJECT_TYPE_UNKNOWN :
+- 		case YAFFS_OBJECT_TYPE_HARDLINK :
+- 		case YAFFS_OBJECT_TYPE_SPECIAL :
+- 		default:
+- 		        /* TODO? */
+- 		        break;
+- 		}
++		__u32 mode = obj->yst_mode;
++		switch (obj->variantType) {
++		case YAFFS_OBJECT_TYPE_FILE:
++			if (!S_ISREG(mode)) {
++				obj->yst_mode &= ~S_IFMT;
++				obj->yst_mode |= S_IFREG;
++			}
++
++			break;
++		case YAFFS_OBJECT_TYPE_SYMLINK:
++			if (!S_ISLNK(mode)) {
++				obj->yst_mode &= ~S_IFMT;
++				obj->yst_mode |= S_IFLNK;
++			}
++
++			break;
++		case YAFFS_OBJECT_TYPE_DIRECTORY:
++			if (!S_ISDIR(mode)) {
++				obj->yst_mode &= ~S_IFMT;
++				obj->yst_mode |= S_IFDIR;
++			}
++
++			break;
++		case YAFFS_OBJECT_TYPE_UNKNOWN:
++		case YAFFS_OBJECT_TYPE_HARDLINK:
++		case YAFFS_OBJECT_TYPE_SPECIAL:
++		default:
++			/* TODO? */
++			break;
++		}
++
++		inode->i_flags |= S_NOATIME;
+ 
+ 		inode->i_ino = obj->objectId;
+ 		inode->i_mode = obj->yst_mode;
+ 		inode->i_uid = obj->yst_uid;
+ 		inode->i_gid = obj->yst_gid;
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19))
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 19))
+ 		inode->i_blksize = inode->i_sb->s_blocksize;
+ #endif
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 
+ 		inode->i_rdev = old_decode_dev(obj->yst_rdev);
+ 		inode->i_atime.tv_sec = (time_t) (obj->yst_atime);
+@@ -781,26 +951,25 @@ static void yaffs_FillInodeFromObject(st
+ 		inode->i_nlink = yaffs_GetObjectLinkCount(obj);
+ 
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG
+-		   "yaffs_FillInode mode %x uid %d gid %d size %d count %d\n",
+-		   inode->i_mode, inode->i_uid, inode->i_gid,
+-		   (int)inode->i_size, atomic_read(&inode->i_count)));
++			("yaffs_FillInode mode %x uid %d gid %d size %d count %d\n",
++			inode->i_mode, inode->i_uid, inode->i_gid,
++			(int)inode->i_size, atomic_read(&inode->i_count)));
+ 
+ 		switch (obj->yst_mode & S_IFMT) {
+ 		default:	/* fifo, device or socket */
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 			init_special_inode(inode, obj->yst_mode,
+-					   old_decode_dev(obj->yst_rdev));
++					old_decode_dev(obj->yst_rdev));
+ #else
+ 			init_special_inode(inode, obj->yst_mode,
+-					   (dev_t) (obj->yst_rdev));
++					(dev_t) (obj->yst_rdev));
+ #endif
+ 			break;
+ 		case S_IFREG:	/* file */
+ 			inode->i_op = &yaffs_file_inode_operations;
+ 			inode->i_fop = &yaffs_file_operations;
+ 			inode->i_mapping->a_ops =
+-			    &yaffs_file_address_operations;
++				&yaffs_file_address_operations;
+ 			break;
+ 		case S_IFDIR:	/* directory */
+ 			inode->i_op = &yaffs_dir_inode_operations;
+@@ -817,34 +986,36 @@ static void yaffs_FillInodeFromObject(st
+ 
+ 	} else {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_FileInode invalid parameters\n"));
++			("yaffs_FileInode invalid parameters\n"));
+ 	}
+ 
+ }
+ 
+ struct inode *yaffs_get_inode(struct super_block *sb, int mode, int dev,
+-			      yaffs_Object * obj)
++				yaffs_Object *obj)
+ {
+ 	struct inode *inode;
+ 
+ 	if (!sb) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_get_inode for NULL super_block!!\n"));
++			("yaffs_get_inode for NULL super_block!!\n"));
+ 		return NULL;
+ 
+ 	}
+ 
+ 	if (!obj) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_get_inode for NULL object!!\n"));
++			("yaffs_get_inode for NULL object!!\n"));
+ 		return NULL;
+ 
+ 	}
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_get_inode for object %d\n", obj->objectId));
++		("yaffs_get_inode for object %d\n", obj->objectId));
+ 
+-	inode = iget(sb, obj->objectId);
++	inode = Y_IGET(sb, obj->objectId);
++	if (IS_ERR(inode))
++		return NULL;
+ 
+ 	/* NB Side effect: iget calls back to yaffs_read_inode(). */
+ 	/* iget also increments the inode's i_count */
+@@ -854,7 +1025,7 @@ struct inode *yaffs_get_inode(struct sup
+ }
+ 
+ static ssize_t yaffs_file_write(struct file *f, const char *buf, size_t n,
+-				loff_t * pos)
++				loff_t *pos)
+ {
+ 	yaffs_Object *obj;
+ 	int nWritten, ipos;
+@@ -869,28 +1040,26 @@ static ssize_t yaffs_file_write(struct f
+ 
+ 	inode = f->f_dentry->d_inode;
+ 
+-	if (!S_ISBLK(inode->i_mode) && f->f_flags & O_APPEND) {
++	if (!S_ISBLK(inode->i_mode) && f->f_flags & O_APPEND)
+ 		ipos = inode->i_size;
+-	} else {
++	else
+ 		ipos = *pos;
+-	}
+ 
+-	if (!obj) {
++	if (!obj)
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_file_write: hey obj is null!\n"));
+-	} else {
++			("yaffs_file_write: hey obj is null!\n"));
++	else
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG
+-		   "yaffs_file_write about to write writing %d bytes"
+-		   "to object %d at %d\n",
+-		   n, obj->objectId, ipos));
+-	}
++			("yaffs_file_write about to write writing %zu bytes"
++			"to object %d at %d\n",
++			n, obj->objectId, ipos));
+ 
+ 	nWritten = yaffs_WriteDataToFile(obj, buf, ipos, n, 0);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_file_write writing %d bytes, %d written at %d\n",
+-	   n, nWritten, ipos));
++		("yaffs_file_write writing %zu bytes, %d written at %d\n",
++		n, nWritten, ipos));
++
+ 	if (nWritten > 0) {
+ 		ipos += nWritten;
+ 		*pos = ipos;
+@@ -899,10 +1068,9 @@ static ssize_t yaffs_file_write(struct f
+ 			inode->i_blocks = (ipos + 511) >> 9;
+ 
+ 			T(YAFFS_TRACE_OS,
+-			  (KERN_DEBUG
+-			   "yaffs_file_write size updated to %d bytes, "
+-			   "%d blocks\n",
+-			   ipos, (int)(inode->i_blocks)));
++				("yaffs_file_write size updated to %d bytes, "
++				"%d blocks\n",
++				ipos, (int)(inode->i_blocks)));
+ 		}
+ 
+ 	}
+@@ -910,13 +1078,54 @@ static ssize_t yaffs_file_write(struct f
+ 	return nWritten == 0 ? -ENOSPC : nWritten;
+ }
+ 
++/* Space holding and freeing is done to ensure we have space available for write_begin/end */
++/* For now we just assume few parallel writes and check against a small number. */
++/* Todo: need to do this with a counter to handle parallel reads better */
++
++static ssize_t yaffs_hold_space(struct file *f)
++{
++	yaffs_Object *obj;
++	yaffs_Device *dev;
++
++	int nFreeChunks;
++
++
++	obj = yaffs_DentryToObject(f->f_dentry);
++
++	dev = obj->myDev;
++
++	yaffs_GrossLock(dev);
++
++	nFreeChunks = yaffs_GetNumberOfFreeChunks(dev);
++
++	yaffs_GrossUnlock(dev);
++
++	return (nFreeChunks > 20) ? 1 : 0;
++}
++
++static void yaffs_release_space(struct file *f)
++{
++	yaffs_Object *obj;
++	yaffs_Device *dev;
++
++
++	obj = yaffs_DentryToObject(f->f_dentry);
++
++	dev = obj->myDev;
++
++	yaffs_GrossLock(dev);
++
++
++	yaffs_GrossUnlock(dev);
++}
++
+ static int yaffs_readdir(struct file *f, void *dirent, filldir_t filldir)
+ {
+ 	yaffs_Object *obj;
+ 	yaffs_Device *dev;
+ 	struct inode *inode = f->f_dentry->d_inode;
+ 	unsigned long offset, curoffs;
+-	struct list_head *i;
++	struct ylist_head *i;
+ 	yaffs_Object *l;
+ 
+ 	char name[YAFFS_MAX_NAME_LENGTH + 1];
+@@ -932,24 +1141,20 @@ static int yaffs_readdir(struct file *f,
+ 
+ 	if (offset == 0) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_readdir: entry . ino %d \n",
+-		   (int)inode->i_ino));
+-		if (filldir(dirent, ".", 1, offset, inode->i_ino, DT_DIR)
+-		    < 0) {
++			("yaffs_readdir: entry . ino %d \n",
++			(int)inode->i_ino));
++		if (filldir(dirent, ".", 1, offset, inode->i_ino, DT_DIR) < 0)
+ 			goto out;
+-		}
+ 		offset++;
+ 		f->f_pos++;
+ 	}
+ 	if (offset == 1) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_readdir: entry .. ino %d \n",
+-		   (int)f->f_dentry->d_parent->d_inode->i_ino));
+-		if (filldir
+-		    (dirent, "..", 2, offset,
+-		     f->f_dentry->d_parent->d_inode->i_ino, DT_DIR) < 0) {
++			("yaffs_readdir: entry .. ino %d \n",
++			(int)f->f_dentry->d_parent->d_inode->i_ino));
++		if (filldir(dirent, "..", 2, offset,
++			f->f_dentry->d_parent->d_inode->i_ino, DT_DIR) < 0)
+ 			goto out;
+-		}
+ 		offset++;
+ 		f->f_pos++;
+ 	}
+@@ -965,35 +1170,32 @@ static int yaffs_readdir(struct file *f,
+ 		f->f_version = inode->i_version;
+ 	}
+ 
+-	list_for_each(i, &obj->variant.directoryVariant.children) {
++	ylist_for_each(i, &obj->variant.directoryVariant.children) {
+ 		curoffs++;
+ 		if (curoffs >= offset) {
+-			l = list_entry(i, yaffs_Object, siblings);
++			l = ylist_entry(i, yaffs_Object, siblings);
+ 
+ 			yaffs_GetObjectName(l, name,
+ 					    YAFFS_MAX_NAME_LENGTH + 1);
+ 			T(YAFFS_TRACE_OS,
+-			  (KERN_DEBUG "yaffs_readdir: %s inode %d\n", name,
++			  ("yaffs_readdir: %s inode %d\n", name,
+ 			   yaffs_GetObjectInode(l)));
+ 
+ 			if (filldir(dirent,
+-				    name,
+-				    strlen(name),
+-				    offset,
+-				    yaffs_GetObjectInode(l),
+-				    yaffs_GetObjectType(l))
+-			    < 0) {
++					name,
++					strlen(name),
++					offset,
++					yaffs_GetObjectInode(l),
++					yaffs_GetObjectType(l)) < 0)
+ 				goto up_and_out;
+-			}
+ 
+ 			offset++;
+ 			f->f_pos++;
+ 		}
+ 	}
+ 
+-      up_and_out:
+-      out:
+-
++up_and_out:
++out:
+ 	yaffs_GrossUnlock(dev);
+ 
+ 	return 0;
+@@ -1002,12 +1204,19 @@ static int yaffs_readdir(struct file *f,
+ /*
+  * File creation. Allocate an inode, and we're done..
+  */
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29)
++#define YCRED(x) x
++#else
++#define YCRED(x) (x->cred)
++#endif
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode,
+-		       dev_t rdev)
++			dev_t rdev)
+ #else
+ static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode,
+-		       int rdev)
++			int rdev)
+ #endif
+ {
+ 	struct inode *inode;
+@@ -1018,25 +1227,25 @@ static int yaffs_mknod(struct inode *dir
+ 	yaffs_Object *parent = yaffs_InodeToObject(dir);
+ 
+ 	int error = -ENOSPC;
+-	uid_t uid = current->fsuid;
+-	gid_t gid = (dir->i_mode & S_ISGID) ? dir->i_gid : current->fsgid;
++	uid_t uid = YCRED(current)->fsuid;
++	gid_t gid = (dir->i_mode & S_ISGID) ? dir->i_gid : YCRED(current)->fsgid;
+ 
+-	if((dir->i_mode & S_ISGID) && S_ISDIR(mode))
++	if ((dir->i_mode & S_ISGID) && S_ISDIR(mode))
+ 		mode |= S_ISGID;
+ 
+ 	if (parent) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_mknod: parent object %d type %d\n",
+-		   parent->objectId, parent->variantType));
++			("yaffs_mknod: parent object %d type %d\n",
++			parent->objectId, parent->variantType));
+ 	} else {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_mknod: could not get parent object\n"));
++			("yaffs_mknod: could not get parent object\n"));
+ 		return -EPERM;
+ 	}
+ 
+ 	T(YAFFS_TRACE_OS, ("yaffs_mknod: making oject for %s, "
+-			   "mode %x dev %x\n",
+-			   dentry->d_name.name, mode, rdev));
++			"mode %x dev %x\n",
++			dentry->d_name.name, mode, rdev));
+ 
+ 	dev = parent->myDev;
+ 
+@@ -1045,33 +1254,28 @@ static int yaffs_mknod(struct inode *dir
+ 	switch (mode & S_IFMT) {
+ 	default:
+ 		/* Special (socket, fifo, device...) */
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG
+-				   "yaffs_mknod: making special\n"));
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+-		obj =
+-		    yaffs_MknodSpecial(parent, dentry->d_name.name, mode, uid,
+-				       gid, old_encode_dev(rdev));
+-#else
+-		obj =
+-		    yaffs_MknodSpecial(parent, dentry->d_name.name, mode, uid,
+-				       gid, rdev);
++		T(YAFFS_TRACE_OS, ("yaffs_mknod: making special\n"));
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
++		obj = yaffs_MknodSpecial(parent, dentry->d_name.name, mode, uid,
++				gid, old_encode_dev(rdev));
++#else
++		obj = yaffs_MknodSpecial(parent, dentry->d_name.name, mode, uid,
++				gid, rdev);
+ #endif
+ 		break;
+ 	case S_IFREG:		/* file          */
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_mknod: making file\n"));
+-		obj =
+-		    yaffs_MknodFile(parent, dentry->d_name.name, mode, uid,
+-				    gid);
++		T(YAFFS_TRACE_OS, ("yaffs_mknod: making file\n"));
++		obj = yaffs_MknodFile(parent, dentry->d_name.name, mode, uid,
++				gid);
+ 		break;
+ 	case S_IFDIR:		/* directory */
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_mknod: making directory\n"));
+-		obj =
+-		    yaffs_MknodDirectory(parent, dentry->d_name.name, mode,
+-					 uid, gid);
++			("yaffs_mknod: making directory\n"));
++		obj = yaffs_MknodDirectory(parent, dentry->d_name.name, mode,
++					uid, gid);
+ 		break;
+ 	case S_IFLNK:		/* symlink */
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_mknod: making file\n"));
++		T(YAFFS_TRACE_OS, ("yaffs_mknod: making symlink\n"));
+ 		obj = NULL;	/* Do we ever get here? */
+ 		break;
+ 	}
+@@ -1083,12 +1287,12 @@ static int yaffs_mknod(struct inode *dir
+ 		inode = yaffs_get_inode(dir->i_sb, mode, rdev, obj);
+ 		d_instantiate(dentry, inode);
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_mknod created object %d count = %d\n",
+-		   obj->objectId, atomic_read(&inode->i_count)));
++			("yaffs_mknod created object %d count = %d\n",
++			obj->objectId, atomic_read(&inode->i_count)));
+ 		error = 0;
+ 	} else {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_mknod failed making object\n"));
++			("yaffs_mknod failed making object\n"));
+ 		error = -ENOMEM;
+ 	}
+ 
+@@ -1098,25 +1302,19 @@ static int yaffs_mknod(struct inode *dir
+ static int yaffs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
+ {
+ 	int retVal;
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_mkdir\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_mkdir\n"));
+ 	retVal = yaffs_mknod(dir, dentry, mode | S_IFDIR, 0);
+-#if 0
+-	/* attempt to fix dir bug - didn't work */
+-	if (!retVal) {
+-		dget(dentry);
+-	}
+-#endif
+ 	return retVal;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode,
+ 			struct nameidata *n)
+ #else
+ static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode)
+ #endif
+ {
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_create\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_create\n"));
+ 	return yaffs_mknod(dir, dentry, mode | S_IFREG, 0);
+ }
+ 
+@@ -1127,8 +1325,8 @@ static int yaffs_unlink(struct inode *di
+ 	yaffs_Device *dev;
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_unlink %d:%s\n", (int)(dir->i_ino),
+-	   dentry->d_name.name));
++		("yaffs_unlink %d:%s\n", (int)(dir->i_ino),
++		dentry->d_name.name));
+ 
+ 	dev = yaffs_InodeToObject(dir)->myDev;
+ 
+@@ -1151,82 +1349,74 @@ static int yaffs_unlink(struct inode *di
+  * Create a link...
+  */
+ static int yaffs_link(struct dentry *old_dentry, struct inode *dir,
+-		      struct dentry *dentry)
++			struct dentry *dentry)
+ {
+ 	struct inode *inode = old_dentry->d_inode;
+ 	yaffs_Object *obj = NULL;
+ 	yaffs_Object *link = NULL;
+ 	yaffs_Device *dev;
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_link\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_link\n"));
+ 
+ 	obj = yaffs_InodeToObject(inode);
+ 	dev = obj->myDev;
+ 
+ 	yaffs_GrossLock(dev);
+ 
+-	if (!S_ISDIR(inode->i_mode))	/* Don't link directories */
+-	{
+-		link =
+-		    yaffs_Link(yaffs_InodeToObject(dir), dentry->d_name.name,
+-			       obj);
+-	}
++	if (!S_ISDIR(inode->i_mode))		/* Don't link directories */
++		link = yaffs_Link(yaffs_InodeToObject(dir), dentry->d_name.name,
++			obj);
+ 
+ 	if (link) {
+ 		old_dentry->d_inode->i_nlink = yaffs_GetObjectLinkCount(obj);
+ 		d_instantiate(dentry, old_dentry->d_inode);
+ 		atomic_inc(&old_dentry->d_inode->i_count);
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_link link count %d i_count %d\n",
+-		   old_dentry->d_inode->i_nlink,
+-		   atomic_read(&old_dentry->d_inode->i_count)));
+-
++			("yaffs_link link count %d i_count %d\n",
++			old_dentry->d_inode->i_nlink,
++			atomic_read(&old_dentry->d_inode->i_count)));
+ 	}
+ 
+ 	yaffs_GrossUnlock(dev);
+ 
+-	if (link) {
+-
++	if (link)
+ 		return 0;
+-	}
+ 
+ 	return -EPERM;
+ }
+ 
+ static int yaffs_symlink(struct inode *dir, struct dentry *dentry,
+-			 const char *symname)
++				const char *symname)
+ {
+ 	yaffs_Object *obj;
+ 	yaffs_Device *dev;
+-	uid_t uid = current->fsuid;
+-	gid_t gid = (dir->i_mode & S_ISGID) ? dir->i_gid : current->fsgid;
++	uid_t uid = YCRED(current)->fsuid;
++	gid_t gid = (dir->i_mode & S_ISGID) ? dir->i_gid : YCRED(current)->fsgid;
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_symlink\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_symlink\n"));
+ 
+ 	dev = yaffs_InodeToObject(dir)->myDev;
+ 	yaffs_GrossLock(dev);
+ 	obj = yaffs_MknodSymLink(yaffs_InodeToObject(dir), dentry->d_name.name,
+-				 S_IFLNK | S_IRWXUGO, uid, gid, symname);
++				S_IFLNK | S_IRWXUGO, uid, gid, symname);
+ 	yaffs_GrossUnlock(dev);
+ 
+ 	if (obj) {
+-
+ 		struct inode *inode;
+ 
+ 		inode = yaffs_get_inode(dir->i_sb, obj->yst_mode, 0, obj);
+ 		d_instantiate(dentry, inode);
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG "symlink created OK\n"));
++		T(YAFFS_TRACE_OS, ("symlink created OK\n"));
+ 		return 0;
+ 	} else {
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG "symlink not created\n"));
+-
++		T(YAFFS_TRACE_OS, ("symlink not created\n"));
+ 	}
+ 
+ 	return -ENOMEM;
+ }
+ 
+ static int yaffs_sync_object(struct file *file, struct dentry *dentry,
+-			     int datasync)
++				int datasync)
+ {
+ 
+ 	yaffs_Object *obj;
+@@ -1236,7 +1426,7 @@ static int yaffs_sync_object(struct file
+ 
+ 	dev = obj->myDev;
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_sync_object\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_sync_object\n"));
+ 	yaffs_GrossLock(dev);
+ 	yaffs_FlushFile(obj, 1);
+ 	yaffs_GrossUnlock(dev);
+@@ -1255,41 +1445,36 @@ static int yaffs_rename(struct inode *ol
+ 	int retVal = YAFFS_FAIL;
+ 	yaffs_Object *target;
+ 
+-        T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_rename\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_rename\n"));
+ 	dev = yaffs_InodeToObject(old_dir)->myDev;
+ 
+ 	yaffs_GrossLock(dev);
+ 
+ 	/* Check if the target is an existing directory that is not empty. */
+-	target =
+-	    yaffs_FindObjectByName(yaffs_InodeToObject(new_dir),
+-				   new_dentry->d_name.name);
++	target = yaffs_FindObjectByName(yaffs_InodeToObject(new_dir),
++				new_dentry->d_name.name);
+ 
+ 
+ 
+-	if (target &&
+-	    target->variantType == YAFFS_OBJECT_TYPE_DIRECTORY &&
+-	    !list_empty(&target->variant.directoryVariant.children)) {
++	if (target && target->variantType == YAFFS_OBJECT_TYPE_DIRECTORY &&
++		!ylist_empty(&target->variant.directoryVariant.children)) {
+ 
+-	        T(YAFFS_TRACE_OS, (KERN_DEBUG "target is non-empty dir\n"));
++		T(YAFFS_TRACE_OS, ("target is non-empty dir\n"));
+ 
+ 		retVal = YAFFS_FAIL;
+ 	} else {
+-
+ 		/* Now does unlinking internally using shadowing mechanism */
+-	        T(YAFFS_TRACE_OS, (KERN_DEBUG "calling yaffs_RenameObject\n"));
+-
+-		retVal =
+-		    yaffs_RenameObject(yaffs_InodeToObject(old_dir),
+-				       old_dentry->d_name.name,
+-				       yaffs_InodeToObject(new_dir),
+-				       new_dentry->d_name.name);
++		T(YAFFS_TRACE_OS, ("calling yaffs_RenameObject\n"));
+ 
++		retVal = yaffs_RenameObject(yaffs_InodeToObject(old_dir),
++				old_dentry->d_name.name,
++				yaffs_InodeToObject(new_dir),
++				new_dentry->d_name.name);
+ 	}
+ 	yaffs_GrossUnlock(dev);
+ 
+ 	if (retVal == YAFFS_OK) {
+-		if(target) {
++		if (target) {
+ 			new_dentry->d_inode->i_nlink--;
+ 			mark_inode_dirty(new_dentry->d_inode);
+ 		}
+@@ -1298,7 +1483,6 @@ static int yaffs_rename(struct inode *ol
+ 	} else {
+ 		return -ENOTEMPTY;
+ 	}
+-
+ }
+ 
+ static int yaffs_setattr(struct dentry *dentry, struct iattr *attr)
+@@ -1308,15 +1492,15 @@ static int yaffs_setattr(struct dentry *
+ 	yaffs_Device *dev;
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_setattr of object %d\n",
+-	   yaffs_InodeToObject(inode)->objectId));
+-
+-	if ((error = inode_change_ok(inode, attr)) == 0) {
++		("yaffs_setattr of object %d\n",
++		yaffs_InodeToObject(inode)->objectId));
+ 
++	error = inode_change_ok(inode, attr);
++	if (error == 0) {
+ 		dev = yaffs_InodeToObject(inode)->myDev;
+ 		yaffs_GrossLock(dev);
+ 		if (yaffs_SetAttributes(yaffs_InodeToObject(inode), attr) ==
+-		    YAFFS_OK) {
++				YAFFS_OK) {
+ 			error = 0;
+ 		} else {
+ 			error = -EPERM;
+@@ -1328,12 +1512,12 @@ static int yaffs_setattr(struct dentry *
+ 	return error;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_statfs(struct dentry *dentry, struct kstatfs *buf)
+ {
+ 	yaffs_Device *dev = yaffs_DentryToObject(dentry)->myDev;
+ 	struct super_block *sb = dentry->d_sb;
+-#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_statfs(struct super_block *sb, struct kstatfs *buf)
+ {
+ 	yaffs_Device *dev = yaffs_SuperToDevice(sb);
+@@ -1343,32 +1527,53 @@ static int yaffs_statfs(struct super_blo
+ 	yaffs_Device *dev = yaffs_SuperToDevice(sb);
+ #endif
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_statfs\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_statfs\n"));
+ 
+ 	yaffs_GrossLock(dev);
+ 
+ 	buf->f_type = YAFFS_MAGIC;
+ 	buf->f_bsize = sb->s_blocksize;
+ 	buf->f_namelen = 255;
+-	if (sb->s_blocksize > dev->nDataBytesPerChunk) {
++
++	if (dev->nDataBytesPerChunk & (dev->nDataBytesPerChunk - 1)) {
++		/* Do this if chunk size is not a power of 2 */
++
++		uint64_t bytesInDev;
++		uint64_t bytesFree;
++
++		bytesInDev = ((uint64_t)((dev->endBlock - dev->startBlock + 1))) *
++			((uint64_t)(dev->nChunksPerBlock * dev->nDataBytesPerChunk));
++
++		do_div(bytesInDev, sb->s_blocksize); /* bytesInDev becomes the number of blocks */
++		buf->f_blocks = bytesInDev;
++
++		bytesFree  = ((uint64_t)(yaffs_GetNumberOfFreeChunks(dev))) *
++			((uint64_t)(dev->nDataBytesPerChunk));
++
++		do_div(bytesFree, sb->s_blocksize);
++
++		buf->f_bfree = bytesFree;
++
++	} else if (sb->s_blocksize > dev->nDataBytesPerChunk) {
+ 
+ 		buf->f_blocks =
+-		    (dev->endBlock - dev->startBlock +
+-		     1) * dev->nChunksPerBlock / (sb->s_blocksize /
+-						  dev->nDataBytesPerChunk);
++			(dev->endBlock - dev->startBlock + 1) *
++			dev->nChunksPerBlock /
++			(sb->s_blocksize / dev->nDataBytesPerChunk);
+ 		buf->f_bfree =
+-		    yaffs_GetNumberOfFreeChunks(dev) / (sb->s_blocksize /
+-							dev->nDataBytesPerChunk);
++			yaffs_GetNumberOfFreeChunks(dev) /
++			(sb->s_blocksize / dev->nDataBytesPerChunk);
+ 	} else {
+-
+ 		buf->f_blocks =
+-		    (dev->endBlock - dev->startBlock +
+-		     1) * dev->nChunksPerBlock * (dev->nDataBytesPerChunk /
+-						  sb->s_blocksize);
++			(dev->endBlock - dev->startBlock + 1) *
++			dev->nChunksPerBlock *
++			(dev->nDataBytesPerChunk / sb->s_blocksize);
++
+ 		buf->f_bfree =
+-		    yaffs_GetNumberOfFreeChunks(dev) * (dev->nDataBytesPerChunk /
+-							sb->s_blocksize);
++			yaffs_GetNumberOfFreeChunks(dev) *
++			(dev->nDataBytesPerChunk / sb->s_blocksize);
+ 	}
++
+ 	buf->f_files = 0;
+ 	buf->f_ffree = 0;
+ 	buf->f_bavail = buf->f_bfree;
+@@ -1378,18 +1583,19 @@ static int yaffs_statfs(struct super_blo
+ }
+ 
+ 
+-/**
+ static int yaffs_do_sync_fs(struct super_block *sb)
+ {
+ 
+ 	yaffs_Device *dev = yaffs_SuperToDevice(sb);
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_do_sync_fs\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_do_sync_fs\n"));
+ 
+-	if(sb->s_dirt) {
++	if (sb->s_dirt) {
+ 		yaffs_GrossLock(dev);
+ 
+-		if(dev)
++		if (dev) {
++			yaffs_FlushEntireDeviceCache(dev);
+ 			yaffs_CheckpointSave(dev);
++		}
+ 
+ 		yaffs_GrossUnlock(dev);
+ 
+@@ -1397,35 +1603,73 @@ static int yaffs_do_sync_fs(struct super
+ 	}
+ 	return 0;
+ }
+-**/
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static void yaffs_write_super(struct super_block *sb)
+ #else
+ static int yaffs_write_super(struct super_block *sb)
+ #endif
+ {
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_write_super\n"));
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18))
+-	return 0; /* yaffs_do_sync_fs(sb);*/
++	T(YAFFS_TRACE_OS, ("yaffs_write_super\n"));
++	if (yaffs_auto_checkpoint >= 2)
++		yaffs_do_sync_fs(sb);
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 18))
++	return 0;
+ #endif
+ }
+ 
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_sync_fs(struct super_block *sb, int wait)
+ #else
+ static int yaffs_sync_fs(struct super_block *sb)
+ #endif
+ {
++	T(YAFFS_TRACE_OS, ("yaffs_sync_fs\n"));
++
++	if (yaffs_auto_checkpoint >= 1)
++		yaffs_do_sync_fs(sb);
++
++	return 0;
++}
++
++#ifdef YAFFS_USE_OWN_IGET
++
++static struct inode *yaffs_iget(struct super_block *sb, unsigned long ino)
++{
++	struct inode *inode;
++	yaffs_Object *obj;
++	yaffs_Device *dev = yaffs_SuperToDevice(sb);
++
++	T(YAFFS_TRACE_OS,
++		("yaffs_iget for %lu\n", ino));
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_sync_fs\n"));
++	inode = iget_locked(sb, ino);
++	if (!inode)
++		return ERR_PTR(-ENOMEM);
++	if (!(inode->i_state & I_NEW))
++		return inode;
++
++	/* NB This is called as a side effect of other functions, but
++	 * we had to release the lock to prevent deadlocks, so
++	 * need to lock again.
++	 */
+ 
+-	return 0; /* yaffs_do_sync_fs(sb);*/
++	yaffs_GrossLock(dev);
+ 
++	obj = yaffs_FindObjectByNumber(dev, inode->i_ino);
++
++	yaffs_FillInodeFromObject(inode, obj);
++
++	yaffs_GrossUnlock(dev);
++
++	unlock_new_inode(inode);
++	return inode;
+ }
+ 
++#else
+ 
+ static void yaffs_read_inode(struct inode *inode)
+ {
+@@ -1438,7 +1682,7 @@ static void yaffs_read_inode(struct inod
+ 	yaffs_Device *dev = yaffs_SuperToDevice(inode->i_sb);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_read_inode for %d\n", (int)inode->i_ino));
++		("yaffs_read_inode for %d\n", (int)inode->i_ino));
+ 
+ 	yaffs_GrossLock(dev);
+ 
+@@ -1449,18 +1693,20 @@ static void yaffs_read_inode(struct inod
+ 	yaffs_GrossUnlock(dev);
+ }
+ 
+-static LIST_HEAD(yaffs_dev_list);
++#endif
++
++static YLIST_HEAD(yaffs_dev_list);
+ 
+-#if 0 // not used
++#if 0 /* not used */
+ static int yaffs_remount_fs(struct super_block *sb, int *flags, char *data)
+ {
+ 	yaffs_Device    *dev = yaffs_SuperToDevice(sb);
+ 
+-	if( *flags & MS_RDONLY ) {
++	if (*flags & MS_RDONLY) {
+ 		struct mtd_info *mtd = yaffs_SuperToDevice(sb)->genericDevice;
+ 
+ 		T(YAFFS_TRACE_OS,
+-			(KERN_DEBUG "yaffs_remount_fs: %s: RO\n", dev->name ));
++			("yaffs_remount_fs: %s: RO\n", dev->name));
+ 
+ 		yaffs_GrossLock(dev);
+ 
+@@ -1472,10 +1718,9 @@ static int yaffs_remount_fs(struct super
+ 			mtd->sync(mtd);
+ 
+ 		yaffs_GrossUnlock(dev);
+-	}
+-	else {
++	} else {
+ 		T(YAFFS_TRACE_OS,
+-			(KERN_DEBUG "yaffs_remount_fs: %s: RW\n", dev->name ));
++			("yaffs_remount_fs: %s: RW\n", dev->name));
+ 	}
+ 
+ 	return 0;
+@@ -1486,7 +1731,7 @@ static void yaffs_put_super(struct super
+ {
+ 	yaffs_Device *dev = yaffs_SuperToDevice(sb);
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_put_super\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_put_super\n"));
+ 
+ 	yaffs_GrossLock(dev);
+ 
+@@ -1494,18 +1739,17 @@ static void yaffs_put_super(struct super
+ 
+ 	yaffs_CheckpointSave(dev);
+ 
+-	if (dev->putSuperFunc) {
++	if (dev->putSuperFunc)
+ 		dev->putSuperFunc(sb);
+-	}
+ 
+ 	yaffs_Deinitialise(dev);
+ 
+ 	yaffs_GrossUnlock(dev);
+ 
+ 	/* we assume this is protected by lock_kernel() in mount/umount */
+-	list_del(&dev->devList);
++	ylist_del(&dev->devList);
+ 
+-	if(dev->spareBuffer){
++	if (dev->spareBuffer) {
+ 		YFREE(dev->spareBuffer);
+ 		dev->spareBuffer = NULL;
+ 	}
+@@ -1516,12 +1760,10 @@ static void yaffs_put_super(struct super
+ 
+ static void yaffs_MTDPutSuper(struct super_block *sb)
+ {
+-
+ 	struct mtd_info *mtd = yaffs_SuperToDevice(sb)->genericDevice;
+ 
+-	if (mtd->sync) {
++	if (mtd->sync)
+ 		mtd->sync(mtd);
+-	}
+ 
+ 	put_mtd_device(mtd);
+ }
+@@ -1531,9 +1773,9 @@ static void yaffs_MarkSuperBlockDirty(vo
+ {
+ 	struct super_block *sb = (struct super_block *)vsb;
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_MarkSuperBlockDirty() sb = %p\n",sb));
+-//	if(sb)
+-//		sb->s_dirt = 1;
++	T(YAFFS_TRACE_OS, ("yaffs_MarkSuperBlockDirty() sb = %p\n", sb));
++	if (sb)
++		sb->s_dirt = 1;
+ }
+ 
+ typedef struct {
+@@ -1546,48 +1788,48 @@ typedef struct {
+ #define MAX_OPT_LEN 20
+ static int yaffs_parse_options(yaffs_options *options, const char *options_str)
+ {
+-	char cur_opt[MAX_OPT_LEN+1];
++	char cur_opt[MAX_OPT_LEN + 1];
+ 	int p;
+ 	int error = 0;
+ 
+ 	/* Parse through the options which is a comma seperated list */
+ 
+-	while(options_str && *options_str && !error){
+-		memset(cur_opt,0,MAX_OPT_LEN+1);
++	while (options_str && *options_str && !error) {
++		memset(cur_opt, 0, MAX_OPT_LEN + 1);
+ 		p = 0;
+ 
+-		while(*options_str && *options_str != ','){
+-			if(p < MAX_OPT_LEN){
++		while (*options_str && *options_str != ',') {
++			if (p < MAX_OPT_LEN) {
+ 				cur_opt[p] = *options_str;
+ 				p++;
+ 			}
+ 			options_str++;
+ 		}
+ 
+-		if(!strcmp(cur_opt,"inband-tags"))
++		if (!strcmp(cur_opt, "inband-tags"))
+ 			options->inband_tags = 1;
+-		else if(!strcmp(cur_opt,"no-cache"))
++		else if (!strcmp(cur_opt, "no-cache"))
+ 			options->no_cache = 1;
+-		else if(!strcmp(cur_opt,"no-checkpoint-read"))
++		else if (!strcmp(cur_opt, "no-checkpoint-read"))
+ 			options->skip_checkpoint_read = 1;
+-		else if(!strcmp(cur_opt,"no-checkpoint-write"))
++		else if (!strcmp(cur_opt, "no-checkpoint-write"))
+ 			options->skip_checkpoint_write = 1;
+-		else if(!strcmp(cur_opt,"no-checkpoint")){
++		else if (!strcmp(cur_opt, "no-checkpoint")) {
+ 			options->skip_checkpoint_read = 1;
+ 			options->skip_checkpoint_write = 1;
+ 		} else {
+-			printk(KERN_INFO "yaffs: Bad mount option \"%s\"\n",cur_opt);
++			printk(KERN_INFO "yaffs: Bad mount option \"%s\"\n",
++					cur_opt);
+ 			error = 1;
+ 		}
+-
+ 	}
+ 
+ 	return error;
+ }
+ 
+ static struct super_block *yaffs_internal_read_super(int yaffsVersion,
+-						     struct super_block *sb,
+-						     void *data, int silent)
++						struct super_block *sb,
++						void *data, int silent)
+ {
+ 	int nBlocks;
+ 	struct inode *inode = NULL;
+@@ -1602,6 +1844,7 @@ static struct super_block *yaffs_interna
+ 
+ 	sb->s_magic = YAFFS_MAGIC;
+ 	sb->s_op = &yaffs_super_ops;
++	sb->s_flags |= MS_NOATIME;
+ 
+ 	if (!sb)
+ 		printk(KERN_INFO "yaffs: sb is NULL\n");
+@@ -1614,14 +1857,14 @@ static struct super_block *yaffs_interna
+ 		       sb->s_dev,
+ 		       yaffs_devname(sb, devname_buf));
+ 
+-	if(!data_str)
++	if (!data_str)
+ 		data_str = "";
+ 
+-	printk(KERN_INFO "yaffs: passed flags \"%s\"\n",data_str);
++	printk(KERN_INFO "yaffs: passed flags \"%s\"\n", data_str);
+ 
+-	memset(&options,0,sizeof(options));
++	memset(&options, 0, sizeof(options));
+ 
+-	if(yaffs_parse_options(&options,data_str)){
++	if (yaffs_parse_options(&options, data_str)) {
+ 		/* Option parsing failed */
+ 		return NULL;
+ 	}
+@@ -1645,9 +1888,9 @@ static struct super_block *yaffs_interna
+ 			       yaffs_devname(sb, devname_buf)));
+ 
+ 	/* Check it's an mtd device..... */
+-	if (MAJOR(sb->s_dev) != MTD_BLOCK_MAJOR) {
++	if (MAJOR(sb->s_dev) != MTD_BLOCK_MAJOR)
+ 		return NULL;	/* This isn't an mtd device */
+-	}
++
+ 	/* Get the device */
+ 	mtd = get_mtd_device(NULL, MINOR(sb->s_dev));
+ 	if (!mtd) {
+@@ -1673,29 +1916,23 @@ static struct super_block *yaffs_interna
+ 	T(YAFFS_TRACE_OS, (" %s %d\n", WRITE_SIZE_STR, WRITE_SIZE(mtd)));
+ 	T(YAFFS_TRACE_OS, (" oobsize %d\n", mtd->oobsize));
+ 	T(YAFFS_TRACE_OS, (" erasesize %d\n", mtd->erasesize));
+-	T(YAFFS_TRACE_OS, (" size %d\n", mtd->size));
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29)
++	T(YAFFS_TRACE_OS, (" size %u\n", mtd->size));
++#else
++	T(YAFFS_TRACE_OS, (" size %lld\n", mtd->size));
++#endif
+ 
+ #ifdef CONFIG_YAFFS_AUTO_YAFFS2
+ 
+-	if (yaffsVersion == 1 &&
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-	    mtd->writesize >= 2048) {
+-#else
+-	    mtd->oobblock >= 2048) {
+-#endif
+-	    T(YAFFS_TRACE_ALWAYS,("yaffs: auto selecting yaffs2\n"));
+-	    yaffsVersion = 2;
++	if (yaffsVersion == 1 && WRITE_SIZE(mtd) >= 2048) {
++		T(YAFFS_TRACE_ALWAYS, ("yaffs: auto selecting yaffs2\n"));
++		yaffsVersion = 2;
+ 	}
+ 
+ 	/* Added NCB 26/5/2006 for completeness */
+-	if (yaffsVersion == 2 &&
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-	    mtd->writesize == 512) {
+-#else
+-	    mtd->oobblock == 512) {
+-#endif
+-	    T(YAFFS_TRACE_ALWAYS,("yaffs: auto selecting yaffs1\n"));
+-	    yaffsVersion = 1;
++	if (yaffsVersion == 2 && !options.inband_tags && WRITE_SIZE(mtd) == 512) {
++		T(YAFFS_TRACE_ALWAYS, ("yaffs: auto selecting yaffs1\n"));
++		yaffsVersion = 1;
+ 	}
+ 
+ #endif
+@@ -1707,7 +1944,7 @@ static struct super_block *yaffs_interna
+ 		    !mtd->block_markbad ||
+ 		    !mtd->read ||
+ 		    !mtd->write ||
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ 		    !mtd->read_oob || !mtd->write_oob) {
+ #else
+ 		    !mtd->write_ecc ||
+@@ -1719,12 +1956,9 @@ static struct super_block *yaffs_interna
+ 			return NULL;
+ 		}
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-		if (mtd->writesize < YAFFS_MIN_YAFFS2_CHUNK_SIZE ||
+-#else
+-		if (mtd->oobblock < YAFFS_MIN_YAFFS2_CHUNK_SIZE ||
+-#endif
+-		    mtd->oobsize < YAFFS_MIN_YAFFS2_SPARE_SIZE) {
++		if ((WRITE_SIZE(mtd) < YAFFS_MIN_YAFFS2_CHUNK_SIZE ||
++		    mtd->oobsize < YAFFS_MIN_YAFFS2_SPARE_SIZE) &&
++		    !options.inband_tags) {
+ 			T(YAFFS_TRACE_ALWAYS,
+ 			  ("yaffs: MTD device does not have the "
+ 			   "right page sizes\n"));
+@@ -1735,7 +1969,7 @@ static struct super_block *yaffs_interna
+ 		if (!mtd->erase ||
+ 		    !mtd->read ||
+ 		    !mtd->write ||
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ 		    !mtd->read_oob || !mtd->write_oob) {
+ #else
+ 		    !mtd->write_ecc ||
+@@ -1761,7 +1995,7 @@ static struct super_block *yaffs_interna
+ 	 * Set the yaffs_Device up for mtd
+ 	 */
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 	sb->s_fs_info = dev = kmalloc(sizeof(yaffs_Device), GFP_KERNEL);
+ #else
+ 	sb->u.generic_sbp = dev = kmalloc(sizeof(yaffs_Device), GFP_KERNEL);
+@@ -1780,13 +2014,15 @@ static struct super_block *yaffs_interna
+ 
+ 	/* Set up the memory size parameters.... */
+ 
+-	nBlocks = mtd->size / (YAFFS_CHUNKS_PER_BLOCK * YAFFS_BYTES_PER_CHUNK);
++	nBlocks = YCALCBLOCKS(mtd->size, (YAFFS_CHUNKS_PER_BLOCK * YAFFS_BYTES_PER_CHUNK));
++
+ 	dev->startBlock = 0;
+ 	dev->endBlock = nBlocks - 1;
+ 	dev->nChunksPerBlock = YAFFS_CHUNKS_PER_BLOCK;
+-	dev->nDataBytesPerChunk = YAFFS_BYTES_PER_CHUNK;
++	dev->totalBytesPerChunk = YAFFS_BYTES_PER_CHUNK;
+ 	dev->nReservedBlocks = 5;
+ 	dev->nShortOpCaches = (options.no_cache) ? 0 : 10;
++	dev->inbandTags = options.inband_tags;
+ 
+ 	/* ... and the functions. */
+ 	if (yaffsVersion == 2) {
+@@ -1798,20 +2034,19 @@ static struct super_block *yaffs_interna
+ 		dev->queryNANDBlock = nandmtd2_QueryNANDBlock;
+ 		dev->spareBuffer = YMALLOC(mtd->oobsize);
+ 		dev->isYaffs2 = 1;
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-		dev->nDataBytesPerChunk = mtd->writesize;
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
++		dev->totalBytesPerChunk = mtd->writesize;
+ 		dev->nChunksPerBlock = mtd->erasesize / mtd->writesize;
+ #else
+-		dev->nDataBytesPerChunk = mtd->oobblock;
++		dev->totalBytesPerChunk = mtd->oobblock;
+ 		dev->nChunksPerBlock = mtd->erasesize / mtd->oobblock;
+ #endif
+-		nBlocks = mtd->size / mtd->erasesize;
++		nBlocks = YCALCBLOCKS(mtd->size, mtd->erasesize);
+ 
+-		dev->nCheckpointReservedBlocks = CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS;
+ 		dev->startBlock = 0;
+ 		dev->endBlock = nBlocks - 1;
+ 	} else {
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ 		/* use the MTD interface in yaffs_mtdif1.c */
+ 		dev->writeChunkWithTagsToNAND =
+ 			nandmtd1_WriteChunkWithTagsToNAND;
+@@ -1847,7 +2082,7 @@ static struct super_block *yaffs_interna
+ 	dev->skipCheckpointWrite = options.skip_checkpoint_write;
+ 
+ 	/* we assume this is protected by lock_kernel() in mount/umount */
+-	list_add_tail(&dev->devList, &yaffs_dev_list);
++	ylist_add_tail(&dev->devList, &yaffs_dev_list);
+ 
+ 	init_MUTEX(&dev->grossLock);
+ 
+@@ -1884,20 +2119,23 @@ static struct super_block *yaffs_interna
+ 		return NULL;
+ 	}
+ 	sb->s_root = root;
++	sb->s_dirt = !dev->isCheckpointed;
++	T(YAFFS_TRACE_ALWAYS,
++	  ("yaffs_read_super: isCheckpointed %d\n", dev->isCheckpointed));
+ 
+ 	T(YAFFS_TRACE_OS, ("yaffs_read_super: done\n"));
+ 	return sb;
+ }
+ 
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_internal_read_super_mtd(struct super_block *sb, void *data,
+ 					 int silent)
+ {
+ 	return yaffs_internal_read_super(1, sb, data, silent) ? 0 : -EINVAL;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_read_super(struct file_system_type *fs,
+ 			    int flags, const char *dev_name,
+ 			    void *data, struct vfsmount *mnt)
+@@ -1938,14 +2176,14 @@ static DECLARE_FSTYPE(yaffs_fs_type, "ya
+ 
+ #ifdef CONFIG_YAFFS_YAFFS2
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs2_internal_read_super_mtd(struct super_block *sb, void *data,
+ 					  int silent)
+ {
+ 	return yaffs_internal_read_super(2, sb, data, silent) ? 0 : -EINVAL;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs2_read_super(struct file_system_type *fs,
+ 			int flags, const char *dev_name, void *data,
+ 			struct vfsmount *mnt)
+@@ -1990,12 +2228,12 @@ static char *yaffs_dump_dev(char *buf, y
+ {
+ 	buf += sprintf(buf, "startBlock......... %d\n", dev->startBlock);
+ 	buf += sprintf(buf, "endBlock........... %d\n", dev->endBlock);
++	buf += sprintf(buf, "totalBytesPerChunk. %d\n", dev->totalBytesPerChunk);
+ 	buf += sprintf(buf, "nDataBytesPerChunk. %d\n", dev->nDataBytesPerChunk);
+ 	buf += sprintf(buf, "chunkGroupBits..... %d\n", dev->chunkGroupBits);
+ 	buf += sprintf(buf, "chunkGroupSize..... %d\n", dev->chunkGroupSize);
+ 	buf += sprintf(buf, "nErasedBlocks...... %d\n", dev->nErasedBlocks);
+ 	buf += sprintf(buf, "nReservedBlocks.... %d\n", dev->nReservedBlocks);
+-	buf += sprintf(buf, "nCheckptResBlocks.. %d\n", dev->nCheckpointReservedBlocks);
+ 	buf += sprintf(buf, "blocksInCheckpoint. %d\n", dev->blocksInCheckpoint);
+ 	buf += sprintf(buf, "nTnodesCreated..... %d\n", dev->nTnodesCreated);
+ 	buf += sprintf(buf, "nFreeTnodes........ %d\n", dev->nFreeTnodes);
+@@ -2006,10 +2244,8 @@ static char *yaffs_dump_dev(char *buf, y
+ 	buf += sprintf(buf, "nPageReads......... %d\n", dev->nPageReads);
+ 	buf += sprintf(buf, "nBlockErasures..... %d\n", dev->nBlockErasures);
+ 	buf += sprintf(buf, "nGCCopies.......... %d\n", dev->nGCCopies);
+-	buf +=
+-	    sprintf(buf, "garbageCollections. %d\n", dev->garbageCollections);
+-	buf +=
+-	    sprintf(buf, "passiveGCs......... %d\n",
++	buf += sprintf(buf, "garbageCollections. %d\n", dev->garbageCollections);
++	buf += sprintf(buf, "passiveGCs......... %d\n",
+ 		    dev->passiveGarbageCollections);
+ 	buf += sprintf(buf, "nRetriedWrites..... %d\n", dev->nRetriedWrites);
+ 	buf += sprintf(buf, "nShortOpCaches..... %d\n", dev->nShortOpCaches);
+@@ -2025,6 +2261,7 @@ static char *yaffs_dump_dev(char *buf, y
+ 	    sprintf(buf, "nBackgroudDeletions %d\n", dev->nBackgroundDeletions);
+ 	buf += sprintf(buf, "useNANDECC......... %d\n", dev->useNANDECC);
+ 	buf += sprintf(buf, "isYaffs2........... %d\n", dev->isYaffs2);
++	buf += sprintf(buf, "inbandTags......... %d\n", dev->inbandTags);
+ 
+ 	return buf;
+ }
+@@ -2033,7 +2270,7 @@ static int yaffs_proc_read(char *page,
+ 			   char **start,
+ 			   off_t offset, int count, int *eof, void *data)
+ {
+-	struct list_head *item;
++	struct ylist_head *item;
+ 	char *buf = page;
+ 	int step = offset;
+ 	int n = 0;
+@@ -2057,8 +2294,8 @@ static int yaffs_proc_read(char *page,
+ 	lock_kernel();
+ 
+ 	/* Locate and print the Nth entry.  Order N-squared but N is small. */
+-	list_for_each(item, &yaffs_dev_list) {
+-		yaffs_Device *dev = list_entry(item, yaffs_Device, devList);
++	ylist_for_each(item, &yaffs_dev_list) {
++		yaffs_Device *dev = ylist_entry(item, yaffs_Device, devList);
+ 		if (n < step) {
+ 			n++;
+ 			continue;
+@@ -2119,7 +2356,7 @@ static int yaffs_proc_write(struct file
+ 	char *end;
+ 	char *mask_name;
+ 	const char *x;
+-	char substring[MAX_MASK_NAME_LENGTH+1];
++	char substring[MAX_MASK_NAME_LENGTH + 1];
+ 	int i;
+ 	int done = 0;
+ 	int add, len = 0;
+@@ -2129,9 +2366,8 @@ static int yaffs_proc_write(struct file
+ 
+ 	while (!done && (pos < count)) {
+ 		done = 1;
+-		while ((pos < count) && isspace(buf[pos])) {
++		while ((pos < count) && isspace(buf[pos]))
+ 			pos++;
+-		}
+ 
+ 		switch (buf[pos]) {
+ 		case '+':
+@@ -2148,20 +2384,21 @@ static int yaffs_proc_write(struct file
+ 		mask_name = NULL;
+ 
+ 		mask_bitfield = simple_strtoul(buf + pos, &end, 0);
++
+ 		if (end > buf + pos) {
+ 			mask_name = "numeral";
+ 			len = end - (buf + pos);
+ 			pos += len;
+ 			done = 0;
+ 		} else {
+-			for(x = buf + pos, i = 0;
+-			    (*x == '_' || (*x >='a' && *x <= 'z')) &&
+-			    i <MAX_MASK_NAME_LENGTH; x++, i++, pos++)
+-			    substring[i] = *x;
++			for (x = buf + pos, i = 0;
++			    (*x == '_' || (*x >= 'a' && *x <= 'z')) &&
++			    i < MAX_MASK_NAME_LENGTH; x++, i++, pos++)
++				substring[i] = *x;
+ 			substring[i] = '\0';
+ 
+ 			for (i = 0; mask_flags[i].mask_name != NULL; i++) {
+-				if(strcmp(substring,mask_flags[i].mask_name) == 0){
++				if (strcmp(substring, mask_flags[i].mask_name) == 0) {
+ 					mask_name = mask_flags[i].mask_name;
+ 					mask_bitfield = mask_flags[i].mask_bitfield;
+ 					done = 0;
+@@ -2172,7 +2409,7 @@ static int yaffs_proc_write(struct file
+ 
+ 		if (mask_name != NULL) {
+ 			done = 0;
+-			switch(add) {
++			switch (add) {
+ 			case '-':
+ 				rg &= ~mask_bitfield;
+ 				break;
+@@ -2191,13 +2428,13 @@ static int yaffs_proc_write(struct file
+ 
+ 	yaffs_traceMask = rg | YAFFS_TRACE_ALWAYS;
+ 
+-	printk("new trace = 0x%08X\n",yaffs_traceMask);
++	printk(KERN_DEBUG "new trace = 0x%08X\n", yaffs_traceMask);
+ 
+ 	if (rg & YAFFS_TRACE_ALWAYS) {
+ 		for (i = 0; mask_flags[i].mask_name != NULL; i++) {
+ 			char flag;
+ 			flag = ((rg & mask_flags[i].mask_bitfield) == mask_flags[i].mask_bitfield) ? '+' : '-';
+-			printk("%c%s\n", flag, mask_flags[i].mask_name);
++			printk(KERN_DEBUG "%c%s\n", flag, mask_flags[i].mask_name);
+ 		}
+ 	}
+ 
+@@ -2211,12 +2448,8 @@ struct file_system_to_install {
+ };
+ 
+ static struct file_system_to_install fs_to_install[] = {
+-//#ifdef CONFIG_YAFFS_YAFFS1
+ 	{&yaffs_fs_type, 0},
+-//#endif
+-//#ifdef CONFIG_YAFFS_YAFFS2
+ 	{&yaffs2_fs_type, 0},
+-//#endif
+ 	{NULL, 0}
+ };
+ 
+@@ -2231,15 +2464,14 @@ static int __init init_yaffs_fs(void)
+ 	/* Install the proc_fs entry */
+ 	my_proc_entry = create_proc_entry("yaffs",
+ 					       S_IRUGO | S_IFREG,
+-					       &proc_root);
++					       YPROC_ROOT);
+ 
+ 	if (my_proc_entry) {
+ 		my_proc_entry->write_proc = yaffs_proc_write;
+ 		my_proc_entry->read_proc = yaffs_proc_read;
+ 		my_proc_entry->data = NULL;
+-	} else {
++	} else
+ 		return -ENOMEM;
+-	}
+ 
+ 	/* Now add the file system entries */
+ 
+@@ -2247,9 +2479,8 @@ static int __init init_yaffs_fs(void)
+ 
+ 	while (fsinst->fst && !error) {
+ 		error = register_filesystem(fsinst->fst);
+-		if (!error) {
++		if (!error)
+ 			fsinst->installed = 1;
+-		}
+ 		fsinst++;
+ 	}
+ 
+@@ -2277,7 +2508,7 @@ static void __exit exit_yaffs_fs(void)
+ 	T(YAFFS_TRACE_ALWAYS, ("yaffs " __DATE__ " " __TIME__
+ 			       " removing. \n"));
+ 
+-	remove_proc_entry("yaffs", &proc_root);
++	remove_proc_entry("yaffs", YPROC_ROOT);
+ 
+ 	fsinst = fs_to_install;
+ 
+@@ -2288,7 +2519,6 @@ static void __exit exit_yaffs_fs(void)
+ 		}
+ 		fsinst++;
+ 	}
+-
+ }
+ 
+ module_init(init_yaffs_fs)
+--- /dev/null
++++ b/fs/yaffs2/yaffs_getblockinfo.h
+@@ -0,0 +1,34 @@
++/*
++ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
++ *
++ * Copyright (C) 2002-2007 Aleph One Ltd.
++ *   for Toby Churchill Ltd and Brightstar Engineering
++ *
++ * Created by Charles Manning <charles@aleph1.co.uk>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU Lesser General Public License version 2.1 as
++ * published by the Free Software Foundation.
++ *
++ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
++ */
++
++#ifndef __YAFFS_GETBLOCKINFO_H__
++#define __YAFFS_GETBLOCKINFO_H__
++
++#include "yaffs_guts.h"
++
++/* Function to manipulate block info */
++static Y_INLINE yaffs_BlockInfo *yaffs_GetBlockInfo(yaffs_Device * dev, int blk)
++{
++	if (blk < dev->internalStartBlock || blk > dev->internalEndBlock) {
++		T(YAFFS_TRACE_ERROR,
++		  (TSTR
++		   ("**>> yaffs: getBlockInfo block %d is not valid" TENDSTR),
++		   blk));
++		YBUG();
++	}
++	return &dev->blockInfo[blk - dev->internalStartBlock];
++}
++
++#endif
+--- a/fs/yaffs2/yaffs_guts.c
++++ b/fs/yaffs2/yaffs_guts.c
+@@ -12,16 +12,17 @@
+  */
+ 
+ const char *yaffs_guts_c_version =
+-    "$Id: yaffs_guts.c,v 1.49 2007-05-15 20:07:40 charles Exp $";
++    "$Id: yaffs_guts.c,v 1.82 2009-03-09 04:24:17 charles Exp $";
+ 
+ #include "yportenv.h"
+ 
+ #include "yaffsinterface.h"
+ #include "yaffs_guts.h"
+ #include "yaffs_tagsvalidity.h"
++#include "yaffs_getblockinfo.h"
+ 
+ #include "yaffs_tagscompat.h"
+-#ifndef  CONFIG_YAFFS_USE_OWN_SORT
++#ifndef CONFIG_YAFFS_USE_OWN_SORT
+ #include "yaffs_qsort.h"
+ #endif
+ #include "yaffs_nand.h"
+@@ -32,116 +33,116 @@ const char *yaffs_guts_c_version =
+ #include "yaffs_packedtags2.h"
+ 
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-void yfsd_LockYAFFS(BOOL fsLockOnly);
+-void yfsd_UnlockYAFFS(BOOL fsLockOnly);
+-#endif
+-
+ #define YAFFS_PASSIVE_GC_CHUNKS 2
+ 
+ #include "yaffs_ecc.h"
+ 
+ 
+ /* Robustification (if it ever comes about...) */
+-static void yaffs_RetireBlock(yaffs_Device * dev, int blockInNAND);
+-static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND, int erasedOk);
+-static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+-				     const __u8 * data,
+-				     const yaffs_ExtendedTags * tags);
+-static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+-				    const yaffs_ExtendedTags * tags);
++static void yaffs_RetireBlock(yaffs_Device *dev, int blockInNAND);
++static void yaffs_HandleWriteChunkError(yaffs_Device *dev, int chunkInNAND,
++		int erasedOk);
++static void yaffs_HandleWriteChunkOk(yaffs_Device *dev, int chunkInNAND,
++				const __u8 *data,
++				const yaffs_ExtendedTags *tags);
++static void yaffs_HandleUpdateChunk(yaffs_Device *dev, int chunkInNAND,
++				const yaffs_ExtendedTags *tags);
+ 
+ /* Other local prototypes */
+-static int yaffs_UnlinkObject( yaffs_Object *obj);
++static int yaffs_UnlinkObject(yaffs_Object *obj);
+ static int yaffs_ObjectHasCachedWriteData(yaffs_Object *obj);
+ 
+ static void yaffs_HardlinkFixup(yaffs_Device *dev, yaffs_Object *hardList);
+ 
+-static int yaffs_WriteNewChunkWithTagsToNAND(yaffs_Device * dev,
+-					     const __u8 * buffer,
+-					     yaffs_ExtendedTags * tags,
+-					     int useReserve);
+-static int yaffs_PutChunkIntoFile(yaffs_Object * in, int chunkInInode,
+-				  int chunkInNAND, int inScan);
+-
+-static yaffs_Object *yaffs_CreateNewObject(yaffs_Device * dev, int number,
+-					   yaffs_ObjectType type);
+-static void yaffs_AddObjectToDirectory(yaffs_Object * directory,
+-				       yaffs_Object * obj);
+-static int yaffs_UpdateObjectHeader(yaffs_Object * in, const YCHAR * name,
+-				    int force, int isShrink, int shadows);
+-static void yaffs_RemoveObjectFromDirectory(yaffs_Object * obj);
++static int yaffs_WriteNewChunkWithTagsToNAND(yaffs_Device *dev,
++					const __u8 *buffer,
++					yaffs_ExtendedTags *tags,
++					int useReserve);
++static int yaffs_PutChunkIntoFile(yaffs_Object *in, int chunkInInode,
++				int chunkInNAND, int inScan);
++
++static yaffs_Object *yaffs_CreateNewObject(yaffs_Device *dev, int number,
++					yaffs_ObjectType type);
++static void yaffs_AddObjectToDirectory(yaffs_Object *directory,
++				yaffs_Object *obj);
++static int yaffs_UpdateObjectHeader(yaffs_Object *in, const YCHAR *name,
++				int force, int isShrink, int shadows);
++static void yaffs_RemoveObjectFromDirectory(yaffs_Object *obj);
+ static int yaffs_CheckStructures(void);
+-static int yaffs_DeleteWorker(yaffs_Object * in, yaffs_Tnode * tn, __u32 level,
+-			      int chunkOffset, int *limit);
+-static int yaffs_DoGenericObjectDeletion(yaffs_Object * in);
+-
+-static yaffs_BlockInfo *yaffs_GetBlockInfo(yaffs_Device * dev, int blockNo);
+-
+-static __u8 *yaffs_GetTempBuffer(yaffs_Device * dev, int lineNo);
+-static void yaffs_ReleaseTempBuffer(yaffs_Device * dev, __u8 * buffer,
+-				    int lineNo);
++static int yaffs_DeleteWorker(yaffs_Object *in, yaffs_Tnode *tn, __u32 level,
++			int chunkOffset, int *limit);
++static int yaffs_DoGenericObjectDeletion(yaffs_Object *in);
++
++static yaffs_BlockInfo *yaffs_GetBlockInfo(yaffs_Device *dev, int blockNo);
+ 
+-static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev,
+-				  int chunkInNAND);
+ 
+-static int yaffs_UnlinkWorker(yaffs_Object * obj);
+-static void yaffs_DestroyObject(yaffs_Object * obj);
++static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev,
++				int chunkInNAND);
+ 
+-static int yaffs_TagsMatch(const yaffs_ExtendedTags * tags, int objectId,
+-			   int chunkInObject);
++static int yaffs_UnlinkWorker(yaffs_Object *obj);
+ 
+-loff_t yaffs_GetFileSize(yaffs_Object * obj);
++static int yaffs_TagsMatch(const yaffs_ExtendedTags *tags, int objectId,
++			int chunkInObject);
+ 
+-static int yaffs_AllocateChunk(yaffs_Device * dev, int useReserve, yaffs_BlockInfo **blockUsedPtr);
++static int yaffs_AllocateChunk(yaffs_Device *dev, int useReserve,
++				yaffs_BlockInfo **blockUsedPtr);
+ 
+-static void yaffs_VerifyFreeChunks(yaffs_Device * dev);
++static void yaffs_VerifyFreeChunks(yaffs_Device *dev);
+ 
+ static void yaffs_CheckObjectDetailsLoaded(yaffs_Object *in);
+ 
++static void yaffs_VerifyDirectory(yaffs_Object *directory);
+ #ifdef YAFFS_PARANOID
+-static int yaffs_CheckFileSanity(yaffs_Object * in);
++static int yaffs_CheckFileSanity(yaffs_Object *in);
+ #else
+ #define yaffs_CheckFileSanity(in)
+ #endif
+ 
+-static void yaffs_InvalidateWholeChunkCache(yaffs_Object * in);
+-static void yaffs_InvalidateChunkCache(yaffs_Object * object, int chunkId);
++static void yaffs_InvalidateWholeChunkCache(yaffs_Object *in);
++static void yaffs_InvalidateChunkCache(yaffs_Object *object, int chunkId);
+ 
+ static void yaffs_InvalidateCheckpoint(yaffs_Device *dev);
+ 
+-static int yaffs_FindChunkInFile(yaffs_Object * in, int chunkInInode,
+-				 yaffs_ExtendedTags * tags);
++static int yaffs_FindChunkInFile(yaffs_Object *in, int chunkInInode,
++				yaffs_ExtendedTags *tags);
+ 
+-static __u32 yaffs_GetChunkGroupBase(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos);
+-static yaffs_Tnode *yaffs_FindLevel0Tnode(yaffs_Device * dev,
+-					  yaffs_FileStructure * fStruct,
+-					  __u32 chunkId);
++static __u32 yaffs_GetChunkGroupBase(yaffs_Device *dev, yaffs_Tnode *tn,
++		unsigned pos);
++static yaffs_Tnode *yaffs_FindLevel0Tnode(yaffs_Device *dev,
++					yaffs_FileStructure *fStruct,
++					__u32 chunkId);
+ 
+ 
+ /* Function to calculate chunk and offset */
+ 
+-static void yaffs_AddrToChunk(yaffs_Device *dev, loff_t addr, __u32 *chunk, __u32 *offset)
++static void yaffs_AddrToChunk(yaffs_Device *dev, loff_t addr, int *chunkOut,
++		__u32 *offsetOut)
+ {
+-	if(dev->chunkShift){
+-		/* Easy-peasy power of 2 case */
+-		*chunk  = (__u32)(addr >> dev->chunkShift);
+-		*offset = (__u32)(addr & dev->chunkMask);
+-	}
+-	else if(dev->crumbsPerChunk)
+-	{
+-		/* Case where we're using "crumbs" */
+-		*offset = (__u32)(addr & dev->crumbMask);
+-		addr >>= dev->crumbShift;
+-		*chunk = ((__u32)addr)/dev->crumbsPerChunk;
+-		*offset += ((addr - (*chunk * dev->crumbsPerChunk)) << dev->crumbShift);
++	int chunk;
++	__u32 offset;
++
++	chunk  = (__u32)(addr >> dev->chunkShift);
++
++	if (dev->chunkDiv == 1) {
++		/* easy power of 2 case */
++		offset = (__u32)(addr & dev->chunkMask);
++	} else {
++		/* Non power-of-2 case */
++
++		loff_t chunkBase;
++
++		chunk /= dev->chunkDiv;
++
++		chunkBase = ((loff_t)chunk) * dev->nDataBytesPerChunk;
++		offset = (__u32)(addr - chunkBase);
+ 	}
+-	else
+-		YBUG();
++
++	*chunkOut = chunk;
++	*offsetOut = offset;
+ }
+ 
+-/* Function to return the number of shifts for a power of 2 greater than or equal
+- * to the given number
++/* Function to return the number of shifts for a power of 2 greater than or
++ * equal to the given number
+  * Note we don't try to cater for all possible numbers and this does not have to
+  * be hellishly efficient.
+  */
+@@ -153,13 +154,14 @@ static __u32 ShiftsGE(__u32 x)
+ 
+ 	nShifts = extraBits = 0;
+ 
+-	while(x>1){
+-		if(x & 1) extraBits++;
+-		x>>=1;
++	while (x > 1) {
++		if (x & 1)
++			extraBits++;
++		x >>= 1;
+ 		nShifts++;
+ 	}
+ 
+-	if(extraBits)
++	if (extraBits)
+ 		nShifts++;
+ 
+ 	return nShifts;
+@@ -168,16 +170,17 @@ static __u32 ShiftsGE(__u32 x)
+ /* Function to return the number of shifts to get a 1 in bit 0
+  */
+ 
+-static __u32 ShiftDiv(__u32 x)
++static __u32 Shifts(__u32 x)
+ {
+ 	int nShifts;
+ 
+ 	nShifts =  0;
+ 
+-	if(!x) return 0;
++	if (!x)
++		return 0;
+ 
+-	while( !(x&1)){
+-		x>>=1;
++	while (!(x&1)) {
++		x >>= 1;
+ 		nShifts++;
+ 	}
+ 
+@@ -195,21 +198,25 @@ static int yaffs_InitialiseTempBuffers(y
+ 	int i;
+ 	__u8 *buf = (__u8 *)1;
+ 
+-	memset(dev->tempBuffer,0,sizeof(dev->tempBuffer));
++	memset(dev->tempBuffer, 0, sizeof(dev->tempBuffer));
+ 
+ 	for (i = 0; buf && i < YAFFS_N_TEMP_BUFFERS; i++) {
+ 		dev->tempBuffer[i].line = 0;	/* not in use */
+ 		dev->tempBuffer[i].buffer = buf =
+-		    YMALLOC_DMA(dev->nDataBytesPerChunk);
++		    YMALLOC_DMA(dev->totalBytesPerChunk);
+ 	}
+ 
+ 	return buf ? YAFFS_OK : YAFFS_FAIL;
+-
+ }
+ 
+-static __u8 *yaffs_GetTempBuffer(yaffs_Device * dev, int lineNo)
++__u8 *yaffs_GetTempBuffer(yaffs_Device *dev, int lineNo)
+ {
+ 	int i, j;
++
++	dev->tempInUse++;
++	if (dev->tempInUse > dev->maxTemp)
++		dev->maxTemp = dev->tempInUse;
++
+ 	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
+ 		if (dev->tempBuffer[i].line == 0) {
+ 			dev->tempBuffer[i].line = lineNo;
+@@ -227,9 +234,9 @@ static __u8 *yaffs_GetTempBuffer(yaffs_D
+ 	T(YAFFS_TRACE_BUFFERS,
+ 	  (TSTR("Out of temp buffers at line %d, other held by lines:"),
+ 	   lineNo));
+-	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
++	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++)
+ 		T(YAFFS_TRACE_BUFFERS, (TSTR(" %d "), dev->tempBuffer[i].line));
+-	}
++
+ 	T(YAFFS_TRACE_BUFFERS, (TSTR(" " TENDSTR)));
+ 
+ 	/*
+@@ -242,10 +249,13 @@ static __u8 *yaffs_GetTempBuffer(yaffs_D
+ 
+ }
+ 
+-static void yaffs_ReleaseTempBuffer(yaffs_Device * dev, __u8 * buffer,
++void yaffs_ReleaseTempBuffer(yaffs_Device *dev, __u8 *buffer,
+ 				    int lineNo)
+ {
+ 	int i;
++
++	dev->tempInUse--;
++
+ 	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
+ 		if (dev->tempBuffer[i].buffer == buffer) {
+ 			dev->tempBuffer[i].line = 0;
+@@ -267,27 +277,26 @@ static void yaffs_ReleaseTempBuffer(yaff
+ /*
+  * Determine if we have a managed buffer.
+  */
+-int yaffs_IsManagedTempBuffer(yaffs_Device * dev, const __u8 * buffer)
++int yaffs_IsManagedTempBuffer(yaffs_Device *dev, const __u8 *buffer)
+ {
+ 	int i;
++
+ 	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
+ 		if (dev->tempBuffer[i].buffer == buffer)
+ 			return 1;
++	}
+ 
++	for (i = 0; i < dev->nShortOpCaches; i++) {
++		if (dev->srCache[i].data == buffer)
++			return 1;
+ 	}
+ 
+-    for (i = 0; i < dev->nShortOpCaches; i++) {
+-        if( dev->srCache[i].data == buffer )
+-            return 1;
+-
+-    }
+-
+-    if (buffer == dev->checkpointBuffer)
+-      return 1;
+-
+-    T(YAFFS_TRACE_ALWAYS,
+-	  (TSTR("yaffs: unmaged buffer detected.\n" TENDSTR)));
+-    return 0;
++	if (buffer == dev->checkpointBuffer)
++		return 1;
++
++	T(YAFFS_TRACE_ALWAYS,
++		(TSTR("yaffs: unmaged buffer detected.\n" TENDSTR)));
++	return 0;
+ }
+ 
+ 
+@@ -296,62 +305,63 @@ int yaffs_IsManagedTempBuffer(yaffs_Devi
+  * Chunk bitmap manipulations
+  */
+ 
+-static Y_INLINE __u8 *yaffs_BlockBits(yaffs_Device * dev, int blk)
++static Y_INLINE __u8 *yaffs_BlockBits(yaffs_Device *dev, int blk)
+ {
+ 	if (blk < dev->internalStartBlock || blk > dev->internalEndBlock) {
+ 		T(YAFFS_TRACE_ERROR,
+-		  (TSTR("**>> yaffs: BlockBits block %d is not valid" TENDSTR),
+-		   blk));
++			(TSTR("**>> yaffs: BlockBits block %d is not valid" TENDSTR),
++			blk));
+ 		YBUG();
+ 	}
+ 	return dev->chunkBits +
+-	    (dev->chunkBitmapStride * (blk - dev->internalStartBlock));
++		(dev->chunkBitmapStride * (blk - dev->internalStartBlock));
+ }
+ 
+ static Y_INLINE void yaffs_VerifyChunkBitId(yaffs_Device *dev, int blk, int chunk)
+ {
+-	if(blk < dev->internalStartBlock || blk > dev->internalEndBlock ||
+-	   chunk < 0 || chunk >= dev->nChunksPerBlock) {
+-	   T(YAFFS_TRACE_ERROR,
+-	    (TSTR("**>> yaffs: Chunk Id (%d:%d) invalid"TENDSTR),blk,chunk));
+-	    YBUG();
++	if (blk < dev->internalStartBlock || blk > dev->internalEndBlock ||
++			chunk < 0 || chunk >= dev->nChunksPerBlock) {
++		T(YAFFS_TRACE_ERROR,
++		(TSTR("**>> yaffs: Chunk Id (%d:%d) invalid"TENDSTR),
++			blk, chunk));
++		YBUG();
+ 	}
+ }
+ 
+-static Y_INLINE void yaffs_ClearChunkBits(yaffs_Device * dev, int blk)
++static Y_INLINE void yaffs_ClearChunkBits(yaffs_Device *dev, int blk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+ 
+ 	memset(blkBits, 0, dev->chunkBitmapStride);
+ }
+ 
+-static Y_INLINE void yaffs_ClearChunkBit(yaffs_Device * dev, int blk, int chunk)
++static Y_INLINE void yaffs_ClearChunkBit(yaffs_Device *dev, int blk, int chunk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+ 
+-	yaffs_VerifyChunkBitId(dev,blk,chunk);
++	yaffs_VerifyChunkBitId(dev, blk, chunk);
+ 
+ 	blkBits[chunk / 8] &= ~(1 << (chunk & 7));
+ }
+ 
+-static Y_INLINE void yaffs_SetChunkBit(yaffs_Device * dev, int blk, int chunk)
++static Y_INLINE void yaffs_SetChunkBit(yaffs_Device *dev, int blk, int chunk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+ 
+-	yaffs_VerifyChunkBitId(dev,blk,chunk);
++	yaffs_VerifyChunkBitId(dev, blk, chunk);
+ 
+ 	blkBits[chunk / 8] |= (1 << (chunk & 7));
+ }
+ 
+-static Y_INLINE int yaffs_CheckChunkBit(yaffs_Device * dev, int blk, int chunk)
++static Y_INLINE int yaffs_CheckChunkBit(yaffs_Device *dev, int blk, int chunk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+-	yaffs_VerifyChunkBitId(dev,blk,chunk);
++	yaffs_VerifyChunkBitId(dev, blk, chunk);
+ 
+ 	return (blkBits[chunk / 8] & (1 << (chunk & 7))) ? 1 : 0;
+ }
+ 
+-static Y_INLINE int yaffs_StillSomeChunkBits(yaffs_Device * dev, int blk)
++static Y_INLINE int yaffs_StillSomeChunkBits(yaffs_Device *dev, int blk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+ 	int i;
+@@ -363,17 +373,17 @@ static Y_INLINE int yaffs_StillSomeChunk
+ 	return 0;
+ }
+ 
+-static int yaffs_CountChunkBits(yaffs_Device * dev, int blk)
++static int yaffs_CountChunkBits(yaffs_Device *dev, int blk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+ 	int i;
+ 	int n = 0;
+ 	for (i = 0; i < dev->chunkBitmapStride; i++) {
+ 		__u8 x = *blkBits;
+-		while(x){
+-			if(x & 1)
++		while (x) {
++			if (x & 1)
+ 				n++;
+-			x >>=1;
++			x >>= 1;
+ 		}
+ 
+ 		blkBits++;
+@@ -400,7 +410,7 @@ static int yaffs_SkipNANDVerification(ya
+ 	return !(yaffs_traceMask & (YAFFS_TRACE_VERIFY_NAND));
+ }
+ 
+-static const char * blockStateName[] = {
++static const char *blockStateName[] = {
+ "Unknown",
+ "Needs scanning",
+ "Scanning",
+@@ -413,64 +423,65 @@ static const char * blockStateName[] = {
+ "Dead"
+ };
+ 
+-static void yaffs_VerifyBlock(yaffs_Device *dev,yaffs_BlockInfo *bi,int n)
++static void yaffs_VerifyBlock(yaffs_Device *dev, yaffs_BlockInfo *bi, int n)
+ {
+ 	int actuallyUsed;
+ 	int inUse;
+ 
+-	if(yaffs_SkipVerification(dev))
++	if (yaffs_SkipVerification(dev))
+ 		return;
+ 
+ 	/* Report illegal runtime states */
+-	if(bi->blockState <0 || bi->blockState >= YAFFS_NUMBER_OF_BLOCK_STATES)
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has undefined state %d"TENDSTR),n,bi->blockState));
++	if (bi->blockState >= YAFFS_NUMBER_OF_BLOCK_STATES)
++		T(YAFFS_TRACE_VERIFY, (TSTR("Block %d has undefined state %d"TENDSTR), n, bi->blockState));
+ 
+-	switch(bi->blockState){
+-	 case YAFFS_BLOCK_STATE_UNKNOWN:
+-	 case YAFFS_BLOCK_STATE_SCANNING:
+-	 case YAFFS_BLOCK_STATE_NEEDS_SCANNING:
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has bad run-state %s"TENDSTR),
+-		n,blockStateName[bi->blockState]));
++	switch (bi->blockState) {
++	case YAFFS_BLOCK_STATE_UNKNOWN:
++	case YAFFS_BLOCK_STATE_SCANNING:
++	case YAFFS_BLOCK_STATE_NEEDS_SCANNING:
++		T(YAFFS_TRACE_VERIFY, (TSTR("Block %d has bad run-state %s"TENDSTR),
++		n, blockStateName[bi->blockState]));
+ 	}
+ 
+ 	/* Check pages in use and soft deletions are legal */
+ 
+ 	actuallyUsed = bi->pagesInUse - bi->softDeletions;
+ 
+-	if(bi->pagesInUse < 0 || bi->pagesInUse > dev->nChunksPerBlock ||
++	if (bi->pagesInUse < 0 || bi->pagesInUse > dev->nChunksPerBlock ||
+ 	   bi->softDeletions < 0 || bi->softDeletions > dev->nChunksPerBlock ||
+ 	   actuallyUsed < 0 || actuallyUsed > dev->nChunksPerBlock)
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has illegal values pagesInUsed %d softDeletions %d"TENDSTR),
+-		n,bi->pagesInUse,bi->softDeletions));
++		T(YAFFS_TRACE_VERIFY, (TSTR("Block %d has illegal values pagesInUsed %d softDeletions %d"TENDSTR),
++		n, bi->pagesInUse, bi->softDeletions));
+ 
+ 
+ 	/* Check chunk bitmap legal */
+-	inUse = yaffs_CountChunkBits(dev,n);
+-	if(inUse != bi->pagesInUse)
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has inconsistent values pagesInUse %d counted chunk bits %d"TENDSTR),
+-			n,bi->pagesInUse,inUse));
++	inUse = yaffs_CountChunkBits(dev, n);
++	if (inUse != bi->pagesInUse)
++		T(YAFFS_TRACE_VERIFY, (TSTR("Block %d has inconsistent values pagesInUse %d counted chunk bits %d"TENDSTR),
++			n, bi->pagesInUse, inUse));
+ 
+ 	/* Check that the sequence number is valid.
+ 	 * Ten million is legal, but is very unlikely
+ 	 */
+-	if(dev->isYaffs2 &&
++	if (dev->isYaffs2 &&
+ 	   (bi->blockState == YAFFS_BLOCK_STATE_ALLOCATING || bi->blockState == YAFFS_BLOCK_STATE_FULL) &&
+-	   (bi->sequenceNumber < YAFFS_LOWEST_SEQUENCE_NUMBER || bi->sequenceNumber > 10000000 ))
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has suspect sequence number of %d"TENDSTR),
+-		n,bi->sequenceNumber));
+-
++	   (bi->sequenceNumber < YAFFS_LOWEST_SEQUENCE_NUMBER || bi->sequenceNumber > 10000000))
++		T(YAFFS_TRACE_VERIFY, (TSTR("Block %d has suspect sequence number of %d"TENDSTR),
++		n, bi->sequenceNumber));
+ }
+ 
+-static void yaffs_VerifyCollectedBlock(yaffs_Device *dev,yaffs_BlockInfo *bi,int n)
++static void yaffs_VerifyCollectedBlock(yaffs_Device *dev, yaffs_BlockInfo *bi,
++		int n)
+ {
+-	yaffs_VerifyBlock(dev,bi,n);
++	yaffs_VerifyBlock(dev, bi, n);
+ 
+ 	/* After collection the block should be in the erased state */
+-	/* TODO: This will need to change if we do partial gc */
++	/* This will need to change if we do partial gc */
+ 
+-	if(bi->blockState != YAFFS_BLOCK_STATE_EMPTY){
+-		T(YAFFS_TRACE_ERROR,(TSTR("Block %d is in state %d after gc, should be erased"TENDSTR),
+-			n,bi->blockState));
++	if (bi->blockState != YAFFS_BLOCK_STATE_COLLECTING &&
++			bi->blockState != YAFFS_BLOCK_STATE_EMPTY) {
++		T(YAFFS_TRACE_ERROR, (TSTR("Block %d is in state %d after gc, should be erased"TENDSTR),
++			n, bi->blockState));
+ 	}
+ }
+ 
+@@ -480,52 +491,49 @@ static void yaffs_VerifyBlocks(yaffs_Dev
+ 	int nBlocksPerState[YAFFS_NUMBER_OF_BLOCK_STATES];
+ 	int nIllegalBlockStates = 0;
+ 
+-
+-	if(yaffs_SkipVerification(dev))
++	if (yaffs_SkipVerification(dev))
+ 		return;
+ 
+-	memset(nBlocksPerState,0,sizeof(nBlocksPerState));
+-
++	memset(nBlocksPerState, 0, sizeof(nBlocksPerState));
+ 
+-	for(i = dev->internalStartBlock; i <= dev->internalEndBlock; i++){
+-		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,i);
+-		yaffs_VerifyBlock(dev,bi,i);
++	for (i = dev->internalStartBlock; i <= dev->internalEndBlock; i++) {
++		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, i);
++		yaffs_VerifyBlock(dev, bi, i);
+ 
+-		if(bi->blockState >=0 && bi->blockState < YAFFS_NUMBER_OF_BLOCK_STATES)
++		if (bi->blockState < YAFFS_NUMBER_OF_BLOCK_STATES)
+ 			nBlocksPerState[bi->blockState]++;
+ 		else
+ 			nIllegalBlockStates++;
+-
+ 	}
+ 
+-	T(YAFFS_TRACE_VERIFY,(TSTR(""TENDSTR)));
+-	T(YAFFS_TRACE_VERIFY,(TSTR("Block summary"TENDSTR)));
++	T(YAFFS_TRACE_VERIFY, (TSTR(""TENDSTR)));
++	T(YAFFS_TRACE_VERIFY, (TSTR("Block summary"TENDSTR)));
+ 
+-	T(YAFFS_TRACE_VERIFY,(TSTR("%d blocks have illegal states"TENDSTR),nIllegalBlockStates));
+-	if(nBlocksPerState[YAFFS_BLOCK_STATE_ALLOCATING] > 1)
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Too many allocating blocks"TENDSTR)));
++	T(YAFFS_TRACE_VERIFY, (TSTR("%d blocks have illegal states"TENDSTR), nIllegalBlockStates));
++	if (nBlocksPerState[YAFFS_BLOCK_STATE_ALLOCATING] > 1)
++		T(YAFFS_TRACE_VERIFY, (TSTR("Too many allocating blocks"TENDSTR)));
+ 
+-	for(i = 0; i < YAFFS_NUMBER_OF_BLOCK_STATES; i++)
++	for (i = 0; i < YAFFS_NUMBER_OF_BLOCK_STATES; i++)
+ 		T(YAFFS_TRACE_VERIFY,
+ 		  (TSTR("%s %d blocks"TENDSTR),
+-		  blockStateName[i],nBlocksPerState[i]));
++		  blockStateName[i], nBlocksPerState[i]));
+ 
+-	if(dev->blocksInCheckpoint != nBlocksPerState[YAFFS_BLOCK_STATE_CHECKPOINT])
++	if (dev->blocksInCheckpoint != nBlocksPerState[YAFFS_BLOCK_STATE_CHECKPOINT])
+ 		T(YAFFS_TRACE_VERIFY,
+ 		 (TSTR("Checkpoint block count wrong dev %d count %d"TENDSTR),
+ 		 dev->blocksInCheckpoint, nBlocksPerState[YAFFS_BLOCK_STATE_CHECKPOINT]));
+ 
+-	if(dev->nErasedBlocks != nBlocksPerState[YAFFS_BLOCK_STATE_EMPTY])
++	if (dev->nErasedBlocks != nBlocksPerState[YAFFS_BLOCK_STATE_EMPTY])
+ 		T(YAFFS_TRACE_VERIFY,
+ 		 (TSTR("Erased block count wrong dev %d count %d"TENDSTR),
+ 		 dev->nErasedBlocks, nBlocksPerState[YAFFS_BLOCK_STATE_EMPTY]));
+ 
+-	if(nBlocksPerState[YAFFS_BLOCK_STATE_COLLECTING] > 1)
++	if (nBlocksPerState[YAFFS_BLOCK_STATE_COLLECTING] > 1)
+ 		T(YAFFS_TRACE_VERIFY,
+ 		 (TSTR("Too many collecting blocks %d (max is 1)"TENDSTR),
+ 		 nBlocksPerState[YAFFS_BLOCK_STATE_COLLECTING]));
+ 
+-	T(YAFFS_TRACE_VERIFY,(TSTR(""TENDSTR)));
++	T(YAFFS_TRACE_VERIFY, (TSTR(""TENDSTR)));
+ 
+ }
+ 
+@@ -535,26 +543,26 @@ static void yaffs_VerifyBlocks(yaffs_Dev
+  */
+ static void yaffs_VerifyObjectHeader(yaffs_Object *obj, yaffs_ObjectHeader *oh, yaffs_ExtendedTags *tags, int parentCheck)
+ {
+-	if(yaffs_SkipVerification(obj->myDev))
++	if (obj && yaffs_SkipVerification(obj->myDev))
+ 		return;
+ 
+-	if(!(tags && obj && oh)){
+-	 	T(YAFFS_TRACE_VERIFY,
+-		 		(TSTR("Verifying object header tags %x obj %x oh %x"TENDSTR),
+-		 		(__u32)tags,(__u32)obj,(__u32)oh));
++	if (!(tags && obj && oh)) {
++		T(YAFFS_TRACE_VERIFY,
++				(TSTR("Verifying object header tags %x obj %x oh %x"TENDSTR),
++				(__u32)tags, (__u32)obj, (__u32)oh));
+ 		return;
+ 	}
+ 
+-	if(oh->type <= YAFFS_OBJECT_TYPE_UNKNOWN ||
+-	   oh->type > YAFFS_OBJECT_TYPE_MAX)
+-	 	T(YAFFS_TRACE_VERIFY,
+-		 (TSTR("Obj %d header type is illegal value 0x%x"TENDSTR),
+-		 tags->objectId, oh->type));
+-
+-	if(tags->objectId != obj->objectId)
+-	 	T(YAFFS_TRACE_VERIFY,
+-		 (TSTR("Obj %d header mismatch objectId %d"TENDSTR),
+-		 tags->objectId, obj->objectId));
++	if (oh->type <= YAFFS_OBJECT_TYPE_UNKNOWN ||
++			oh->type > YAFFS_OBJECT_TYPE_MAX)
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d header type is illegal value 0x%x"TENDSTR),
++			tags->objectId, oh->type));
++
++	if (tags->objectId != obj->objectId)
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d header mismatch objectId %d"TENDSTR),
++			tags->objectId, obj->objectId));
+ 
+ 
+ 	/*
+@@ -563,46 +571,43 @@ static void yaffs_VerifyObjectHeader(yaf
+ 	 * Tests do not apply to the root object.
+ 	 */
+ 
+-	if(parentCheck && tags->objectId > 1 && !obj->parent)
+-	 	T(YAFFS_TRACE_VERIFY,
+-		 (TSTR("Obj %d header mismatch parentId %d obj->parent is NULL"TENDSTR),
+-	 	 tags->objectId, oh->parentObjectId));
+-
+-
+-	if(parentCheck && obj->parent &&
+-	   oh->parentObjectId != obj->parent->objectId &&
+-	   (oh->parentObjectId != YAFFS_OBJECTID_UNLINKED ||
+-	    obj->parent->objectId != YAFFS_OBJECTID_DELETED))
+-	 	T(YAFFS_TRACE_VERIFY,
+-		 (TSTR("Obj %d header mismatch parentId %d parentObjectId %d"TENDSTR),
+-	 	 tags->objectId, oh->parentObjectId, obj->parent->objectId));
++	if (parentCheck && tags->objectId > 1 && !obj->parent)
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d header mismatch parentId %d obj->parent is NULL"TENDSTR),
++			tags->objectId, oh->parentObjectId));
+ 
++	if (parentCheck && obj->parent &&
++			oh->parentObjectId != obj->parent->objectId &&
++			(oh->parentObjectId != YAFFS_OBJECTID_UNLINKED ||
++			obj->parent->objectId != YAFFS_OBJECTID_DELETED))
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d header mismatch parentId %d parentObjectId %d"TENDSTR),
++			tags->objectId, oh->parentObjectId, obj->parent->objectId));
+ 
+-	if(tags->objectId > 1 && oh->name[0] == 0) /* Null name */
++	if (tags->objectId > 1 && oh->name[0] == 0) /* Null name */
+ 		T(YAFFS_TRACE_VERIFY,
+-		(TSTR("Obj %d header name is NULL"TENDSTR),
+-		 obj->objectId));
++			(TSTR("Obj %d header name is NULL"TENDSTR),
++			obj->objectId));
+ 
+-	if(tags->objectId > 1 && ((__u8)(oh->name[0])) == 0xff) /* Trashed name */
++	if (tags->objectId > 1 && ((__u8)(oh->name[0])) == 0xff) /* Trashed name */
+ 		T(YAFFS_TRACE_VERIFY,
+-		(TSTR("Obj %d header name is 0xFF"TENDSTR),
+-		 obj->objectId));
++			(TSTR("Obj %d header name is 0xFF"TENDSTR),
++			obj->objectId));
+ }
+ 
+ 
+ 
+-static int yaffs_VerifyTnodeWorker(yaffs_Object * obj, yaffs_Tnode * tn,
+-				  	__u32 level, int chunkOffset)
++static int yaffs_VerifyTnodeWorker(yaffs_Object *obj, yaffs_Tnode *tn,
++					__u32 level, int chunkOffset)
+ {
+ 	int i;
+ 	yaffs_Device *dev = obj->myDev;
+ 	int ok = 1;
+-	int nTnodeBytes = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
+ 
+ 	if (tn) {
+ 		if (level > 0) {
+ 
+-			for (i = 0; i < YAFFS_NTNODES_INTERNAL && ok; i++){
++			for (i = 0; i < YAFFS_NTNODES_INTERNAL && ok; i++) {
+ 				if (tn->internal[i]) {
+ 					ok = yaffs_VerifyTnodeWorker(obj,
+ 							tn->internal[i],
+@@ -611,20 +616,19 @@ static int yaffs_VerifyTnodeWorker(yaffs
+ 				}
+ 			}
+ 		} else if (level == 0) {
+-			int i;
+ 			yaffs_ExtendedTags tags;
+ 			__u32 objectId = obj->objectId;
+ 
+ 			chunkOffset <<=  YAFFS_TNODES_LEVEL0_BITS;
+ 
+-			for(i = 0; i < YAFFS_NTNODES_LEVEL0; i++){
+-				__u32 theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
++			for (i = 0; i < YAFFS_NTNODES_LEVEL0; i++) {
++				__u32 theChunk = yaffs_GetChunkGroupBase(dev, tn, i);
+ 
+-				if(theChunk > 0){
++				if (theChunk > 0) {
+ 					/* T(~0,(TSTR("verifying (%d:%d) %d"TENDSTR),tags.objectId,tags.chunkId,theChunk)); */
+-					yaffs_ReadChunkWithTagsFromNAND(dev,theChunk,NULL, &tags);
+-					if(tags.objectId != objectId || tags.chunkId != chunkOffset){
+-						T(~0,(TSTR("Object %d chunkId %d NAND mismatch chunk %d tags (%d:%d)"TENDSTR),
++					yaffs_ReadChunkWithTagsFromNAND(dev, theChunk, NULL, &tags);
++					if (tags.objectId != objectId || tags.chunkId != chunkOffset) {
++						T(~0, (TSTR("Object %d chunkId %d NAND mismatch chunk %d tags (%d:%d)"TENDSTR),
+ 							objectId, chunkOffset, theChunk,
+ 							tags.objectId, tags.chunkId));
+ 					}
+@@ -646,13 +650,15 @@ static void yaffs_VerifyFile(yaffs_Objec
+ 	__u32 lastChunk;
+ 	__u32 x;
+ 	__u32 i;
+-	int ok;
+ 	yaffs_Device *dev;
+ 	yaffs_ExtendedTags tags;
+ 	yaffs_Tnode *tn;
+ 	__u32 objectId;
+ 
+-	if(obj && yaffs_SkipVerification(obj->myDev))
++	if (!obj)
++		return;
++
++	if (yaffs_SkipVerification(obj->myDev))
+ 		return;
+ 
+ 	dev = obj->myDev;
+@@ -662,17 +668,17 @@ static void yaffs_VerifyFile(yaffs_Objec
+ 	lastChunk =  obj->variant.fileVariant.fileSize / dev->nDataBytesPerChunk + 1;
+ 	x = lastChunk >> YAFFS_TNODES_LEVEL0_BITS;
+ 	requiredTallness = 0;
+-	while (x> 0) {
++	while (x > 0) {
+ 		x >>= YAFFS_TNODES_INTERNAL_BITS;
+ 		requiredTallness++;
+ 	}
+ 
+ 	actualTallness = obj->variant.fileVariant.topLevel;
+ 
+-	if(requiredTallness > actualTallness )
++	if (requiredTallness > actualTallness)
+ 		T(YAFFS_TRACE_VERIFY,
+ 		(TSTR("Obj %d had tnode tallness %d, needs to be %d"TENDSTR),
+-		 obj->objectId,actualTallness, requiredTallness));
++		 obj->objectId, actualTallness, requiredTallness));
+ 
+ 
+ 	/* Check that the chunks in the tnode tree are all correct.
+@@ -680,39 +686,31 @@ static void yaffs_VerifyFile(yaffs_Objec
+ 	 * checking the tags for every chunk match.
+ 	 */
+ 
+-	if(yaffs_SkipNANDVerification(dev))
++	if (yaffs_SkipNANDVerification(dev))
+ 		return;
+ 
+-	for(i = 1; i <= lastChunk; i++){
+-		tn = yaffs_FindLevel0Tnode(dev, &obj->variant.fileVariant,i);
++	for (i = 1; i <= lastChunk; i++) {
++		tn = yaffs_FindLevel0Tnode(dev, &obj->variant.fileVariant, i);
+ 
+ 		if (tn) {
+-			__u32 theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
+-			if(theChunk > 0){
++			__u32 theChunk = yaffs_GetChunkGroupBase(dev, tn, i);
++			if (theChunk > 0) {
+ 				/* T(~0,(TSTR("verifying (%d:%d) %d"TENDSTR),objectId,i,theChunk)); */
+-				yaffs_ReadChunkWithTagsFromNAND(dev,theChunk,NULL, &tags);
+-				if(tags.objectId != objectId || tags.chunkId != i){
+-					T(~0,(TSTR("Object %d chunkId %d NAND mismatch chunk %d tags (%d:%d)"TENDSTR),
++				yaffs_ReadChunkWithTagsFromNAND(dev, theChunk, NULL, &tags);
++				if (tags.objectId != objectId || tags.chunkId != i) {
++					T(~0, (TSTR("Object %d chunkId %d NAND mismatch chunk %d tags (%d:%d)"TENDSTR),
+ 						objectId, i, theChunk,
+ 						tags.objectId, tags.chunkId));
+ 				}
+ 			}
+ 		}
+-
+ 	}
+-
+ }
+ 
+-static void yaffs_VerifyDirectory(yaffs_Object *obj)
+-{
+-	if(obj && yaffs_SkipVerification(obj->myDev))
+-		return;
+-
+-}
+ 
+ static void yaffs_VerifyHardLink(yaffs_Object *obj)
+ {
+-	if(obj && yaffs_SkipVerification(obj->myDev))
++	if (obj && yaffs_SkipVerification(obj->myDev))
+ 		return;
+ 
+ 	/* Verify sane equivalent object */
+@@ -720,7 +718,7 @@ static void yaffs_VerifyHardLink(yaffs_O
+ 
+ static void yaffs_VerifySymlink(yaffs_Object *obj)
+ {
+-	if(obj && yaffs_SkipVerification(obj->myDev))
++	if (obj && yaffs_SkipVerification(obj->myDev))
+ 		return;
+ 
+ 	/* Verify symlink string */
+@@ -728,7 +726,7 @@ static void yaffs_VerifySymlink(yaffs_Ob
+ 
+ static void yaffs_VerifySpecial(yaffs_Object *obj)
+ {
+-	if(obj && yaffs_SkipVerification(obj->myDev))
++	if (obj && yaffs_SkipVerification(obj->myDev))
+ 		return;
+ }
+ 
+@@ -740,14 +738,19 @@ static void yaffs_VerifyObject(yaffs_Obj
+ 	__u32 chunkMax;
+ 
+ 	__u32 chunkIdOk;
+-	__u32 chunkIsLive;
++	__u32 chunkInRange;
++	__u32 chunkShouldNotBeDeleted;
++	__u32 chunkValid;
++
++	if (!obj)
++		return;
+ 
+-	if(!obj)
++	if (obj->beingCreated)
+ 		return;
+ 
+ 	dev = obj->myDev;
+ 
+-	if(yaffs_SkipVerification(dev))
++	if (yaffs_SkipVerification(dev))
+ 		return;
+ 
+ 	/* Check sane object header chunk */
+@@ -755,50 +758,54 @@ static void yaffs_VerifyObject(yaffs_Obj
+ 	chunkMin = dev->internalStartBlock * dev->nChunksPerBlock;
+ 	chunkMax = (dev->internalEndBlock+1) * dev->nChunksPerBlock - 1;
+ 
+-	chunkIdOk = (obj->chunkId >= chunkMin && obj->chunkId <= chunkMax);
+-	chunkIsLive = chunkIdOk &&
++	chunkInRange = (((unsigned)(obj->hdrChunk)) >= chunkMin && ((unsigned)(obj->hdrChunk)) <= chunkMax);
++	chunkIdOk = chunkInRange || obj->hdrChunk == 0;
++	chunkValid = chunkInRange &&
+ 			yaffs_CheckChunkBit(dev,
+-					    obj->chunkId / dev->nChunksPerBlock,
+-					    obj->chunkId % dev->nChunksPerBlock);
+-	if(!obj->fake &&
+-	    (!chunkIdOk || !chunkIsLive)) {
+-	   T(YAFFS_TRACE_VERIFY,
+-	   (TSTR("Obj %d has chunkId %d %s %s"TENDSTR),
+-	   obj->objectId,obj->chunkId,
+-	   chunkIdOk ? "" : ",out of range",
+-	   chunkIsLive || !chunkIdOk ? "" : ",marked as deleted"));
++					obj->hdrChunk / dev->nChunksPerBlock,
++					obj->hdrChunk % dev->nChunksPerBlock);
++	chunkShouldNotBeDeleted = chunkInRange && !chunkValid;
++
++	if (!obj->fake &&
++			(!chunkIdOk || chunkShouldNotBeDeleted)) {
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d has chunkId %d %s %s"TENDSTR),
++			obj->objectId, obj->hdrChunk,
++			chunkIdOk ? "" : ",out of range",
++			chunkShouldNotBeDeleted ? ",marked as deleted" : ""));
+ 	}
+ 
+-	if(chunkIdOk && chunkIsLive &&!yaffs_SkipNANDVerification(dev)) {
++	if (chunkValid && !yaffs_SkipNANDVerification(dev)) {
+ 		yaffs_ExtendedTags tags;
+ 		yaffs_ObjectHeader *oh;
+-		__u8 *buffer = yaffs_GetTempBuffer(dev,__LINE__);
++		__u8 *buffer = yaffs_GetTempBuffer(dev, __LINE__);
+ 
+ 		oh = (yaffs_ObjectHeader *)buffer;
+ 
+-		yaffs_ReadChunkWithTagsFromNAND(dev, obj->chunkId,buffer, &tags);
++		yaffs_ReadChunkWithTagsFromNAND(dev, obj->hdrChunk, buffer,
++				&tags);
+ 
+-		yaffs_VerifyObjectHeader(obj,oh,&tags,1);
++		yaffs_VerifyObjectHeader(obj, oh, &tags, 1);
+ 
+-		yaffs_ReleaseTempBuffer(dev,buffer,__LINE__);
++		yaffs_ReleaseTempBuffer(dev, buffer, __LINE__);
+ 	}
+ 
+ 	/* Verify it has a parent */
+-	if(obj && !obj->fake &&
+-	   (!obj->parent || obj->parent->myDev != dev)){
+-	   T(YAFFS_TRACE_VERIFY,
+-	   (TSTR("Obj %d has parent pointer %p which does not look like an object"TENDSTR),
+-	   obj->objectId,obj->parent));
++	if (obj && !obj->fake &&
++			(!obj->parent || obj->parent->myDev != dev)) {
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d has parent pointer %p which does not look like an object"TENDSTR),
++			obj->objectId, obj->parent));
+ 	}
+ 
+ 	/* Verify parent is a directory */
+-	if(obj->parent && obj->parent->variantType != YAFFS_OBJECT_TYPE_DIRECTORY){
+-	   T(YAFFS_TRACE_VERIFY,
+-	   (TSTR("Obj %d's parent is not a directory (type %d)"TENDSTR),
+-	   obj->objectId,obj->parent->variantType));
++	if (obj->parent && obj->parent->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d's parent is not a directory (type %d)"TENDSTR),
++			obj->objectId, obj->parent->variantType));
+ 	}
+ 
+-	switch(obj->variantType){
++	switch (obj->variantType) {
+ 	case YAFFS_OBJECT_TYPE_FILE:
+ 		yaffs_VerifyFile(obj);
+ 		break;
+@@ -818,33 +825,30 @@ static void yaffs_VerifyObject(yaffs_Obj
+ 	default:
+ 		T(YAFFS_TRACE_VERIFY,
+ 		(TSTR("Obj %d has illegaltype %d"TENDSTR),
+-		obj->objectId,obj->variantType));
++		obj->objectId, obj->variantType));
+ 		break;
+ 	}
+-
+-
+ }
+ 
+ static void yaffs_VerifyObjects(yaffs_Device *dev)
+ {
+ 	yaffs_Object *obj;
+ 	int i;
+-	struct list_head *lh;
++	struct ylist_head *lh;
+ 
+-	if(yaffs_SkipVerification(dev))
++	if (yaffs_SkipVerification(dev))
+ 		return;
+ 
+ 	/* Iterate through the objects in each hash entry */
+ 
+-	 for(i = 0; i <  YAFFS_NOBJECT_BUCKETS; i++){
+-	 	list_for_each(lh, &dev->objectBucket[i].list) {
++	for (i = 0; i <  YAFFS_NOBJECT_BUCKETS; i++) {
++		ylist_for_each(lh, &dev->objectBucket[i].list) {
+ 			if (lh) {
+-				obj = list_entry(lh, yaffs_Object, hashLink);
++				obj = ylist_entry(lh, yaffs_Object, hashLink);
+ 				yaffs_VerifyObject(obj);
+ 			}
+ 		}
+-	 }
+-
++	}
+ }
+ 
+ 
+@@ -855,19 +859,20 @@ static void yaffs_VerifyObjects(yaffs_De
+ static Y_INLINE int yaffs_HashFunction(int n)
+ {
+ 	n = abs(n);
+-	return (n % YAFFS_NOBJECT_BUCKETS);
++	return n % YAFFS_NOBJECT_BUCKETS;
+ }
+ 
+ /*
+- * Access functions to useful fake objects
++ * Access functions to useful fake objects.
++ * Note that root might have a presence in NAND if permissions are set.
+  */
+ 
+-yaffs_Object *yaffs_Root(yaffs_Device * dev)
++yaffs_Object *yaffs_Root(yaffs_Device *dev)
+ {
+ 	return dev->rootDir;
+ }
+ 
+-yaffs_Object *yaffs_LostNFound(yaffs_Device * dev)
++yaffs_Object *yaffs_LostNFound(yaffs_Device *dev)
+ {
+ 	return dev->lostNFoundDir;
+ }
+@@ -877,7 +882,7 @@ yaffs_Object *yaffs_LostNFound(yaffs_Dev
+  *  Erased NAND checking functions
+  */
+ 
+-int yaffs_CheckFF(__u8 * buffer, int nBytes)
++int yaffs_CheckFF(__u8 *buffer, int nBytes)
+ {
+ 	/* Horrible, slow implementation */
+ 	while (nBytes--) {
+@@ -889,9 +894,8 @@ int yaffs_CheckFF(__u8 * buffer, int nBy
+ }
+ 
+ static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev,
+-				  int chunkInNAND)
++				int chunkInNAND)
+ {
+-
+ 	int retval = YAFFS_OK;
+ 	__u8 *data = yaffs_GetTempBuffer(dev, __LINE__);
+ 	yaffs_ExtendedTags tags;
+@@ -899,10 +903,9 @@ static int yaffs_CheckChunkErased(struct
+ 
+ 	result = yaffs_ReadChunkWithTagsFromNAND(dev, chunkInNAND, data, &tags);
+ 
+-	if(tags.eccResult > YAFFS_ECC_RESULT_NO_ERROR)
++	if (tags.eccResult > YAFFS_ECC_RESULT_NO_ERROR)
+ 		retval = YAFFS_FAIL;
+ 
+-
+ 	if (!yaffs_CheckFF(data, dev->nDataBytesPerChunk) || tags.chunkUsed) {
+ 		T(YAFFS_TRACE_NANDACCESS,
+ 		  (TSTR("Chunk %d not erased" TENDSTR), chunkInNAND));
+@@ -915,11 +918,10 @@ static int yaffs_CheckChunkErased(struct
+ 
+ }
+ 
+-
+ static int yaffs_WriteNewChunkWithTagsToNAND(struct yaffs_DeviceStruct *dev,
+-					     const __u8 * data,
+-					     yaffs_ExtendedTags * tags,
+-					     int useReserve)
++					const __u8 *data,
++					yaffs_ExtendedTags *tags,
++					int useReserve)
+ {
+ 	int attempts = 0;
+ 	int writeOk = 0;
+@@ -972,7 +974,7 @@ static int yaffs_WriteNewChunkWithTagsTo
+ 			erasedOk = yaffs_CheckChunkErased(dev, chunk);
+ 			if (erasedOk != YAFFS_OK) {
+ 				T(YAFFS_TRACE_ERROR,
+-				(TSTR ("**>> yaffs chunk %d was not erased"
++				(TSTR("**>> yaffs chunk %d was not erased"
+ 				TENDSTR), chunk));
+ 
+ 				/* try another chunk */
+@@ -992,7 +994,11 @@ static int yaffs_WriteNewChunkWithTagsTo
+ 		/* Copy the data into the robustification buffer */
+ 		yaffs_HandleWriteChunkOk(dev, chunk, data, tags);
+ 
+-	} while (writeOk != YAFFS_OK && attempts < yaffs_wr_attempts);
++	} while (writeOk != YAFFS_OK &&
++		(yaffs_wr_attempts <= 0 || attempts <= yaffs_wr_attempts));
++
++	if (!writeOk)
++		chunk = -1;
+ 
+ 	if (attempts > 1) {
+ 		T(YAFFS_TRACE_ERROR,
+@@ -1009,13 +1015,35 @@ static int yaffs_WriteNewChunkWithTagsTo
+  * Block retiring for handling a broken block.
+  */
+ 
+-static void yaffs_RetireBlock(yaffs_Device * dev, int blockInNAND)
++static void yaffs_RetireBlock(yaffs_Device *dev, int blockInNAND)
+ {
+ 	yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, blockInNAND);
+ 
+ 	yaffs_InvalidateCheckpoint(dev);
+ 
+-	yaffs_MarkBlockBad(dev, blockInNAND);
++	if (yaffs_MarkBlockBad(dev, blockInNAND) != YAFFS_OK) {
++		if (yaffs_EraseBlockInNAND(dev, blockInNAND) != YAFFS_OK) {
++			T(YAFFS_TRACE_ALWAYS, (TSTR(
++				"yaffs: Failed to mark bad and erase block %d"
++				TENDSTR), blockInNAND));
++		} else {
++			yaffs_ExtendedTags tags;
++			int chunkId = blockInNAND * dev->nChunksPerBlock;
++
++			__u8 *buffer = yaffs_GetTempBuffer(dev, __LINE__);
++
++			memset(buffer, 0xff, dev->nDataBytesPerChunk);
++			yaffs_InitialiseTags(&tags);
++			tags.sequenceNumber = YAFFS_SEQUENCE_BAD_BLOCK;
++			if (dev->writeChunkWithTagsToNAND(dev, chunkId -
++				dev->chunkOffset, buffer, &tags) != YAFFS_OK)
++				T(YAFFS_TRACE_ALWAYS, (TSTR("yaffs: Failed to "
++					TCONT("write bad block marker to block %d")
++					TENDSTR), blockInNAND));
++
++			yaffs_ReleaseTempBuffer(dev, buffer, __LINE__);
++		}
++	}
+ 
+ 	bi->blockState = YAFFS_BLOCK_STATE_DEAD;
+ 	bi->gcPrioritise = 0;
+@@ -1029,49 +1057,45 @@ static void yaffs_RetireBlock(yaffs_Devi
+  *
+  */
+ 
+-static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+-				     const __u8 * data,
+-				     const yaffs_ExtendedTags * tags)
++static void yaffs_HandleWriteChunkOk(yaffs_Device *dev, int chunkInNAND,
++				const __u8 *data,
++				const yaffs_ExtendedTags *tags)
+ {
+ }
+ 
+-static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+-				    const yaffs_ExtendedTags * tags)
++static void yaffs_HandleUpdateChunk(yaffs_Device *dev, int chunkInNAND,
++				const yaffs_ExtendedTags *tags)
+ {
+ }
+ 
+ void yaffs_HandleChunkError(yaffs_Device *dev, yaffs_BlockInfo *bi)
+ {
+-	if(!bi->gcPrioritise){
++	if (!bi->gcPrioritise) {
+ 		bi->gcPrioritise = 1;
+ 		dev->hasPendingPrioritisedGCs = 1;
+-		bi->chunkErrorStrikes ++;
++		bi->chunkErrorStrikes++;
+ 
+-		if(bi->chunkErrorStrikes > 3){
++		if (bi->chunkErrorStrikes > 3) {
+ 			bi->needsRetiring = 1; /* Too many stikes, so retire this */
+ 			T(YAFFS_TRACE_ALWAYS, (TSTR("yaffs: Block struck out" TENDSTR)));
+ 
+ 		}
+-
+ 	}
+ }
+ 
+-static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND, int erasedOk)
++static void yaffs_HandleWriteChunkError(yaffs_Device *dev, int chunkInNAND,
++		int erasedOk)
+ {
+-
+ 	int blockInNAND = chunkInNAND / dev->nChunksPerBlock;
+ 	yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, blockInNAND);
+ 
+-	yaffs_HandleChunkError(dev,bi);
++	yaffs_HandleChunkError(dev, bi);
+ 
+-
+-	if(erasedOk ) {
++	if (erasedOk) {
+ 		/* Was an actual write failure, so mark the block for retirement  */
+ 		bi->needsRetiring = 1;
+ 		T(YAFFS_TRACE_ERROR | YAFFS_TRACE_BAD_BLOCKS,
+ 		  (TSTR("**>> Block %d needs retiring" TENDSTR), blockInNAND));
+-
+-
+ 	}
+ 
+ 	/* Delete the chunk */
+@@ -1081,12 +1105,12 @@ static void yaffs_HandleWriteChunkError(
+ 
+ /*---------------- Name handling functions ------------*/
+ 
+-static __u16 yaffs_CalcNameSum(const YCHAR * name)
++static __u16 yaffs_CalcNameSum(const YCHAR *name)
+ {
+ 	__u16 sum = 0;
+ 	__u16 i = 1;
+ 
+-	YUCHAR *bname = (YUCHAR *) name;
++	const YUCHAR *bname = (const YUCHAR *) name;
+ 	if (bname) {
+ 		while ((*bname) && (i < (YAFFS_MAX_NAME_LENGTH/2))) {
+ 
+@@ -1102,14 +1126,14 @@ static __u16 yaffs_CalcNameSum(const YCH
+ 	return sum;
+ }
+ 
+-static void yaffs_SetObjectName(yaffs_Object * obj, const YCHAR * name)
++static void yaffs_SetObjectName(yaffs_Object *obj, const YCHAR *name)
+ {
+ #ifdef CONFIG_YAFFS_SHORT_NAMES_IN_RAM
+-	if (name && yaffs_strlen(name) <= YAFFS_SHORT_NAME_LENGTH) {
++	memset(obj->shortName, 0, sizeof(YCHAR) * (YAFFS_SHORT_NAME_LENGTH+1));
++	if (name && yaffs_strlen(name) <= YAFFS_SHORT_NAME_LENGTH)
+ 		yaffs_strcpy(obj->shortName, name);
+-	} else {
++	else
+ 		obj->shortName[0] = _Y('\0');
+-	}
+ #endif
+ 	obj->sum = yaffs_CalcNameSum(name);
+ }
+@@ -1126,7 +1150,7 @@ static void yaffs_SetObjectName(yaffs_Ob
+  * Don't use this function directly
+  */
+ 
+-static int yaffs_CreateTnodes(yaffs_Device * dev, int nTnodes)
++static int yaffs_CreateTnodes(yaffs_Device *dev, int nTnodes)
+ {
+ 	int i;
+ 	int tnodeSize;
+@@ -1143,6 +1167,9 @@ static int yaffs_CreateTnodes(yaffs_Devi
+ 	 * Must be a multiple of 32-bits  */
+ 	tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
+ 
++	if (tnodeSize < sizeof(yaffs_Tnode))
++		tnodeSize = sizeof(yaffs_Tnode);
++
+ 	/* make these things */
+ 
+ 	newTnodes = YMALLOC(nTnodes * tnodeSize);
+@@ -1150,7 +1177,7 @@ static int yaffs_CreateTnodes(yaffs_Devi
+ 
+ 	if (!newTnodes) {
+ 		T(YAFFS_TRACE_ERROR,
+-		  (TSTR("yaffs: Could not allocate Tnodes" TENDSTR)));
++			(TSTR("yaffs: Could not allocate Tnodes" TENDSTR)));
+ 		return YAFFS_FAIL;
+ 	}
+ 
+@@ -1170,7 +1197,7 @@ static int yaffs_CreateTnodes(yaffs_Devi
+ 	dev->freeTnodes = newTnodes;
+ #else
+ 	/* New hookup for wide tnodes */
+-	for(i = 0; i < nTnodes -1; i++) {
++	for (i = 0; i < nTnodes - 1; i++) {
+ 		curr = (yaffs_Tnode *) &mem[i * tnodeSize];
+ 		next = (yaffs_Tnode *) &mem[(i+1) * tnodeSize];
+ 		curr->internal[0] = next;
+@@ -1197,7 +1224,6 @@ static int yaffs_CreateTnodes(yaffs_Devi
+ 		  (TSTR
+ 		   ("yaffs: Could not add tnodes to management list" TENDSTR)));
+ 		   return YAFFS_FAIL;
+-
+ 	} else {
+ 		tnl->tnodes = newTnodes;
+ 		tnl->next = dev->allocatedTnodeList;
+@@ -1211,14 +1237,13 @@ static int yaffs_CreateTnodes(yaffs_Devi
+ 
+ /* GetTnode gets us a clean tnode. Tries to make allocate more if we run out */
+ 
+-static yaffs_Tnode *yaffs_GetTnodeRaw(yaffs_Device * dev)
++static yaffs_Tnode *yaffs_GetTnodeRaw(yaffs_Device *dev)
+ {
+ 	yaffs_Tnode *tn = NULL;
+ 
+ 	/* If there are none left make more */
+-	if (!dev->freeTnodes) {
++	if (!dev->freeTnodes)
+ 		yaffs_CreateTnodes(dev, YAFFS_ALLOCATION_NTNODES);
+-	}
+ 
+ 	if (dev->freeTnodes) {
+ 		tn = dev->freeTnodes;
+@@ -1233,21 +1258,27 @@ static yaffs_Tnode *yaffs_GetTnodeRaw(ya
+ 		dev->nFreeTnodes--;
+ 	}
+ 
++	dev->nCheckpointBlocksRequired = 0; /* force recalculation*/
++
+ 	return tn;
+ }
+ 
+-static yaffs_Tnode *yaffs_GetTnode(yaffs_Device * dev)
++static yaffs_Tnode *yaffs_GetTnode(yaffs_Device *dev)
+ {
+ 	yaffs_Tnode *tn = yaffs_GetTnodeRaw(dev);
++	int tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
+ 
+-	if(tn)
+-		memset(tn, 0, (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8);
++	if (tnodeSize < sizeof(yaffs_Tnode))
++		tnodeSize = sizeof(yaffs_Tnode);
++
++	if (tn)
++		memset(tn, 0, tnodeSize);
+ 
+ 	return tn;
+ }
+ 
+ /* FreeTnode frees up a tnode and puts it back on the free list */
+-static void yaffs_FreeTnode(yaffs_Device * dev, yaffs_Tnode * tn)
++static void yaffs_FreeTnode(yaffs_Device *dev, yaffs_Tnode *tn)
+ {
+ 	if (tn) {
+ #ifdef CONFIG_YAFFS_TNODE_LIST_DEBUG
+@@ -1262,9 +1293,10 @@ static void yaffs_FreeTnode(yaffs_Device
+ 		dev->freeTnodes = tn;
+ 		dev->nFreeTnodes++;
+ 	}
++	dev->nCheckpointBlocksRequired = 0; /* force recalculation*/
+ }
+ 
+-static void yaffs_DeinitialiseTnodes(yaffs_Device * dev)
++static void yaffs_DeinitialiseTnodes(yaffs_Device *dev)
+ {
+ 	/* Free the list of allocated tnodes */
+ 	yaffs_TnodeList *tmp;
+@@ -1282,71 +1314,72 @@ static void yaffs_DeinitialiseTnodes(yaf
+ 	dev->nFreeTnodes = 0;
+ }
+ 
+-static void yaffs_InitialiseTnodes(yaffs_Device * dev)
++static void yaffs_InitialiseTnodes(yaffs_Device *dev)
+ {
+ 	dev->allocatedTnodeList = NULL;
+ 	dev->freeTnodes = NULL;
+ 	dev->nFreeTnodes = 0;
+ 	dev->nTnodesCreated = 0;
+-
+ }
+ 
+ 
+-void yaffs_PutLevel0Tnode(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos, unsigned val)
++void yaffs_PutLevel0Tnode(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos,
++		unsigned val)
+ {
+-  __u32 *map = (__u32 *)tn;
+-  __u32 bitInMap;
+-  __u32 bitInWord;
+-  __u32 wordInMap;
+-  __u32 mask;
++	__u32 *map = (__u32 *)tn;
++	__u32 bitInMap;
++	__u32 bitInWord;
++	__u32 wordInMap;
++	__u32 mask;
+ 
+-  pos &= YAFFS_TNODES_LEVEL0_MASK;
+-  val >>= dev->chunkGroupBits;
++	pos &= YAFFS_TNODES_LEVEL0_MASK;
++	val >>= dev->chunkGroupBits;
+ 
+-  bitInMap = pos * dev->tnodeWidth;
+-  wordInMap = bitInMap /32;
+-  bitInWord = bitInMap & (32 -1);
++	bitInMap = pos * dev->tnodeWidth;
++	wordInMap = bitInMap / 32;
++	bitInWord = bitInMap & (32 - 1);
+ 
+-  mask = dev->tnodeMask << bitInWord;
++	mask = dev->tnodeMask << bitInWord;
+ 
+-  map[wordInMap] &= ~mask;
+-  map[wordInMap] |= (mask & (val << bitInWord));
++	map[wordInMap] &= ~mask;
++	map[wordInMap] |= (mask & (val << bitInWord));
+ 
+-  if(dev->tnodeWidth > (32-bitInWord)) {
+-    bitInWord = (32 - bitInWord);
+-    wordInMap++;;
+-    mask = dev->tnodeMask >> (/*dev->tnodeWidth -*/ bitInWord);
+-    map[wordInMap] &= ~mask;
+-    map[wordInMap] |= (mask & (val >> bitInWord));
+-  }
++	if (dev->tnodeWidth > (32 - bitInWord)) {
++		bitInWord = (32 - bitInWord);
++		wordInMap++;;
++		mask = dev->tnodeMask >> (/*dev->tnodeWidth -*/ bitInWord);
++		map[wordInMap] &= ~mask;
++		map[wordInMap] |= (mask & (val >> bitInWord));
++	}
+ }
+ 
+-static __u32 yaffs_GetChunkGroupBase(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos)
++static __u32 yaffs_GetChunkGroupBase(yaffs_Device *dev, yaffs_Tnode *tn,
++		unsigned pos)
+ {
+-  __u32 *map = (__u32 *)tn;
+-  __u32 bitInMap;
+-  __u32 bitInWord;
+-  __u32 wordInMap;
+-  __u32 val;
++	__u32 *map = (__u32 *)tn;
++	__u32 bitInMap;
++	__u32 bitInWord;
++	__u32 wordInMap;
++	__u32 val;
+ 
+-  pos &= YAFFS_TNODES_LEVEL0_MASK;
++	pos &= YAFFS_TNODES_LEVEL0_MASK;
+ 
+-  bitInMap = pos * dev->tnodeWidth;
+-  wordInMap = bitInMap /32;
+-  bitInWord = bitInMap & (32 -1);
++	bitInMap = pos * dev->tnodeWidth;
++	wordInMap = bitInMap / 32;
++	bitInWord = bitInMap & (32 - 1);
+ 
+-  val = map[wordInMap] >> bitInWord;
++	val = map[wordInMap] >> bitInWord;
+ 
+-  if(dev->tnodeWidth > (32-bitInWord)) {
+-    bitInWord = (32 - bitInWord);
+-    wordInMap++;;
+-    val |= (map[wordInMap] << bitInWord);
+-  }
++	if	(dev->tnodeWidth > (32 - bitInWord)) {
++		bitInWord = (32 - bitInWord);
++		wordInMap++;;
++		val |= (map[wordInMap] << bitInWord);
++	}
+ 
+-  val &= dev->tnodeMask;
+-  val <<= dev->chunkGroupBits;
++	val &= dev->tnodeMask;
++	val <<= dev->chunkGroupBits;
+ 
+-  return val;
++	return val;
+ }
+ 
+ /* ------------------- End of individual tnode manipulation -----------------*/
+@@ -1357,24 +1390,21 @@ static __u32 yaffs_GetChunkGroupBase(yaf
+  */
+ 
+ /* FindLevel0Tnode finds the level 0 tnode, if one exists. */
+-static yaffs_Tnode *yaffs_FindLevel0Tnode(yaffs_Device * dev,
+-					  yaffs_FileStructure * fStruct,
+-					  __u32 chunkId)
++static yaffs_Tnode *yaffs_FindLevel0Tnode(yaffs_Device *dev,
++					yaffs_FileStructure *fStruct,
++					__u32 chunkId)
+ {
+-
+ 	yaffs_Tnode *tn = fStruct->top;
+ 	__u32 i;
+ 	int requiredTallness;
+ 	int level = fStruct->topLevel;
+ 
+ 	/* Check sane level and chunk Id */
+-	if (level < 0 || level > YAFFS_TNODES_MAX_LEVEL) {
++	if (level < 0 || level > YAFFS_TNODES_MAX_LEVEL)
+ 		return NULL;
+-	}
+ 
+-	if (chunkId > YAFFS_MAX_CHUNK_ID) {
++	if (chunkId > YAFFS_MAX_CHUNK_ID)
+ 		return NULL;
+-	}
+ 
+ 	/* First check we're tall enough (ie enough topLevel) */
+ 
+@@ -1385,22 +1415,17 @@ static yaffs_Tnode *yaffs_FindLevel0Tnod
+ 		requiredTallness++;
+ 	}
+ 
+-	if (requiredTallness > fStruct->topLevel) {
+-		/* Not tall enough, so we can't find it, return NULL. */
+-		return NULL;
+-	}
++	if (requiredTallness > fStruct->topLevel)
++		return NULL; /* Not tall enough, so we can't find it */
+ 
+ 	/* Traverse down to level 0 */
+ 	while (level > 0 && tn) {
+-		tn = tn->
+-		    internal[(chunkId >>
+-			       ( YAFFS_TNODES_LEVEL0_BITS +
+-			         (level - 1) *
+-			         YAFFS_TNODES_INTERNAL_BITS)
+-			      ) &
+-			     YAFFS_TNODES_INTERNAL_MASK];
++		tn = tn->internal[(chunkId >>
++			(YAFFS_TNODES_LEVEL0_BITS +
++				(level - 1) *
++				YAFFS_TNODES_INTERNAL_BITS)) &
++			YAFFS_TNODES_INTERNAL_MASK];
+ 		level--;
+-
+ 	}
+ 
+ 	return tn;
+@@ -1417,12 +1442,11 @@ static yaffs_Tnode *yaffs_FindLevel0Tnod
+  *  be plugged into the ttree.
+  */
+ 
+-static yaffs_Tnode *yaffs_AddOrFindLevel0Tnode(yaffs_Device * dev,
+-					       yaffs_FileStructure * fStruct,
+-					       __u32 chunkId,
+-					       yaffs_Tnode *passedTn)
++static yaffs_Tnode *yaffs_AddOrFindLevel0Tnode(yaffs_Device *dev,
++					yaffs_FileStructure *fStruct,
++					__u32 chunkId,
++					yaffs_Tnode *passedTn)
+ {
+-
+ 	int requiredTallness;
+ 	int i;
+ 	int l;
+@@ -1432,13 +1456,11 @@ static yaffs_Tnode *yaffs_AddOrFindLevel
+ 
+ 
+ 	/* Check sane level and page Id */
+-	if (fStruct->topLevel < 0 || fStruct->topLevel > YAFFS_TNODES_MAX_LEVEL) {
++	if (fStruct->topLevel < 0 || fStruct->topLevel > YAFFS_TNODES_MAX_LEVEL)
+ 		return NULL;
+-	}
+ 
+-	if (chunkId > YAFFS_MAX_CHUNK_ID) {
++	if (chunkId > YAFFS_MAX_CHUNK_ID)
+ 		return NULL;
+-	}
+ 
+ 	/* First check we're tall enough (ie enough topLevel) */
+ 
+@@ -1451,7 +1473,7 @@ static yaffs_Tnode *yaffs_AddOrFindLevel
+ 
+ 
+ 	if (requiredTallness > fStruct->topLevel) {
+-		/* Not tall enough,gotta make the tree taller */
++		/* Not tall enough, gotta make the tree taller */
+ 		for (i = fStruct->topLevel; i < requiredTallness; i++) {
+ 
+ 			tn = yaffs_GetTnode(dev);
+@@ -1473,27 +1495,27 @@ static yaffs_Tnode *yaffs_AddOrFindLevel
+ 	l = fStruct->topLevel;
+ 	tn = fStruct->top;
+ 
+-	if(l > 0) {
++	if (l > 0) {
+ 		while (l > 0 && tn) {
+ 			x = (chunkId >>
+-			     ( YAFFS_TNODES_LEVEL0_BITS +
++			     (YAFFS_TNODES_LEVEL0_BITS +
+ 			      (l - 1) * YAFFS_TNODES_INTERNAL_BITS)) &
+ 			    YAFFS_TNODES_INTERNAL_MASK;
+ 
+ 
+-			if((l>1) && !tn->internal[x]){
++			if ((l > 1) && !tn->internal[x]) {
+ 				/* Add missing non-level-zero tnode */
+ 				tn->internal[x] = yaffs_GetTnode(dev);
+ 
+-			} else if(l == 1) {
++			} else if (l == 1) {
+ 				/* Looking from level 1 at level 0 */
+-			 	if (passedTn) {
++				if (passedTn) {
+ 					/* If we already have one, then release it.*/
+-					if(tn->internal[x])
+-						yaffs_FreeTnode(dev,tn->internal[x]);
++					if (tn->internal[x])
++						yaffs_FreeTnode(dev, tn->internal[x]);
+ 					tn->internal[x] = passedTn;
+ 
+-				} else if(!tn->internal[x]) {
++				} else if (!tn->internal[x]) {
+ 					/* Don't have one, none passed in */
+ 					tn->internal[x] = yaffs_GetTnode(dev);
+ 				}
+@@ -1504,31 +1526,29 @@ static yaffs_Tnode *yaffs_AddOrFindLevel
+ 		}
+ 	} else {
+ 		/* top is level 0 */
+-		if(passedTn) {
+-			memcpy(tn,passedTn,(dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8);
+-			yaffs_FreeTnode(dev,passedTn);
++		if (passedTn) {
++			memcpy(tn, passedTn, (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8);
++			yaffs_FreeTnode(dev, passedTn);
+ 		}
+ 	}
+ 
+ 	return tn;
+ }
+ 
+-static int yaffs_FindChunkInGroup(yaffs_Device * dev, int theChunk,
+-				  yaffs_ExtendedTags * tags, int objectId,
+-				  int chunkInInode)
++static int yaffs_FindChunkInGroup(yaffs_Device *dev, int theChunk,
++				yaffs_ExtendedTags *tags, int objectId,
++				int chunkInInode)
+ {
+ 	int j;
+ 
+ 	for (j = 0; theChunk && j < dev->chunkGroupSize; j++) {
+-		if (yaffs_CheckChunkBit
+-		    (dev, theChunk / dev->nChunksPerBlock,
+-		     theChunk % dev->nChunksPerBlock)) {
++		if (yaffs_CheckChunkBit(dev, theChunk / dev->nChunksPerBlock,
++				theChunk % dev->nChunksPerBlock)) {
+ 			yaffs_ReadChunkWithTagsFromNAND(dev, theChunk, NULL,
+ 							tags);
+ 			if (yaffs_TagsMatch(tags, objectId, chunkInInode)) {
+ 				/* found it; */
+ 				return theChunk;
+-
+ 			}
+ 		}
+ 		theChunk++;
+@@ -1543,7 +1563,7 @@ static int yaffs_FindChunkInGroup(yaffs_
+  * Returns 0 if it stopped early due to hitting the limit and the delete is incomplete.
+  */
+ 
+-static int yaffs_DeleteWorker(yaffs_Object * in, yaffs_Tnode * tn, __u32 level,
++static int yaffs_DeleteWorker(yaffs_Object *in, yaffs_Tnode *tn, __u32 level,
+ 			      int chunkOffset, int *limit)
+ {
+ 	int i;
+@@ -1557,7 +1577,6 @@ static int yaffs_DeleteWorker(yaffs_Obje
+ 
+ 	if (tn) {
+ 		if (level > 0) {
+-
+ 			for (i = YAFFS_NTNODES_INTERNAL - 1; allDone && i >= 0;
+ 			     i--) {
+ 				if (tn->internal[i]) {
+@@ -1565,17 +1584,17 @@ static int yaffs_DeleteWorker(yaffs_Obje
+ 						allDone = 0;
+ 					} else {
+ 						allDone =
+-						    yaffs_DeleteWorker(in,
+-								       tn->
+-								       internal
+-								       [i],
+-								       level -
+-								       1,
+-								       (chunkOffset
++							yaffs_DeleteWorker(in,
++								tn->
++								internal
++								[i],
++								level -
++								1,
++								(chunkOffset
+ 									<<
+ 									YAFFS_TNODES_INTERNAL_BITS)
+-								       + i,
+-								       limit);
++								+ i,
++								limit);
+ 					}
+ 					if (allDone) {
+ 						yaffs_FreeTnode(dev,
+@@ -1584,27 +1603,25 @@ static int yaffs_DeleteWorker(yaffs_Obje
+ 						tn->internal[i] = NULL;
+ 					}
+ 				}
+-
+ 			}
+ 			return (allDone) ? 1 : 0;
+ 		} else if (level == 0) {
+ 			int hitLimit = 0;
+ 
+ 			for (i = YAFFS_NTNODES_LEVEL0 - 1; i >= 0 && !hitLimit;
+-			     i--) {
+-			        theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
++					i--) {
++				theChunk = yaffs_GetChunkGroupBase(dev, tn, i);
+ 				if (theChunk) {
+ 
+-					chunkInInode =
+-					    (chunkOffset <<
+-					     YAFFS_TNODES_LEVEL0_BITS) + i;
++					chunkInInode = (chunkOffset <<
++						YAFFS_TNODES_LEVEL0_BITS) + i;
+ 
+ 					foundChunk =
+-					    yaffs_FindChunkInGroup(dev,
+-								   theChunk,
+-								   &tags,
+-								   in->objectId,
+-								   chunkInInode);
++						yaffs_FindChunkInGroup(dev,
++								theChunk,
++								&tags,
++								in->objectId,
++								chunkInInode);
+ 
+ 					if (foundChunk > 0) {
+ 						yaffs_DeleteChunk(dev,
+@@ -1613,14 +1630,13 @@ static int yaffs_DeleteWorker(yaffs_Obje
+ 						in->nDataChunks--;
+ 						if (limit) {
+ 							*limit = *limit - 1;
+-							if (*limit <= 0) {
++							if (*limit <= 0)
+ 								hitLimit = 1;
+-							}
+ 						}
+ 
+ 					}
+ 
+-					yaffs_PutLevel0Tnode(dev,tn,i,0);
++					yaffs_PutLevel0Tnode(dev, tn, i, 0);
+ 				}
+ 
+ 			}
+@@ -1634,9 +1650,8 @@ static int yaffs_DeleteWorker(yaffs_Obje
+ 
+ }
+ 
+-static void yaffs_SoftDeleteChunk(yaffs_Device * dev, int chunk)
++static void yaffs_SoftDeleteChunk(yaffs_Device *dev, int chunk)
+ {
+-
+ 	yaffs_BlockInfo *theBlock;
+ 
+ 	T(YAFFS_TRACE_DELETION, (TSTR("soft delete chunk %d" TENDSTR), chunk));
+@@ -1654,7 +1669,7 @@ static void yaffs_SoftDeleteChunk(yaffs_
+  * Thus, essentially this is the same as DeleteWorker except that the chunks are soft deleted.
+  */
+ 
+-static int yaffs_SoftDeleteWorker(yaffs_Object * in, yaffs_Tnode * tn,
++static int yaffs_SoftDeleteWorker(yaffs_Object *in, yaffs_Tnode *tn,
+ 				  __u32 level, int chunkOffset)
+ {
+ 	int i;
+@@ -1691,14 +1706,14 @@ static int yaffs_SoftDeleteWorker(yaffs_
+ 		} else if (level == 0) {
+ 
+ 			for (i = YAFFS_NTNODES_LEVEL0 - 1; i >= 0; i--) {
+-				theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
++				theChunk = yaffs_GetChunkGroupBase(dev, tn, i);
+ 				if (theChunk) {
+ 					/* Note this does not find the real chunk, only the chunk group.
+ 					 * We make an assumption that a chunk group is not larger than
+ 					 * a block.
+ 					 */
+ 					yaffs_SoftDeleteChunk(dev, theChunk);
+-					yaffs_PutLevel0Tnode(dev,tn,i,0);
++					yaffs_PutLevel0Tnode(dev, tn, i, 0);
+ 				}
+ 
+ 			}
+@@ -1712,7 +1727,7 @@ static int yaffs_SoftDeleteWorker(yaffs_
+ 
+ }
+ 
+-static void yaffs_SoftDeleteFile(yaffs_Object * obj)
++static void yaffs_SoftDeleteFile(yaffs_Object *obj)
+ {
+ 	if (obj->deleted &&
+ 	    obj->variantType == YAFFS_OBJECT_TYPE_FILE && !obj->softDeleted) {
+@@ -1746,8 +1761,8 @@ static void yaffs_SoftDeleteFile(yaffs_O
+  * by a special case.
+  */
+ 
+-static yaffs_Tnode *yaffs_PruneWorker(yaffs_Device * dev, yaffs_Tnode * tn,
+-				      __u32 level, int del0)
++static yaffs_Tnode *yaffs_PruneWorker(yaffs_Device *dev, yaffs_Tnode *tn,
++				__u32 level, int del0)
+ {
+ 	int i;
+ 	int hasData;
+@@ -1763,9 +1778,8 @@ static yaffs_Tnode *yaffs_PruneWorker(ya
+ 						      (i == 0) ? del0 : 1);
+ 			}
+ 
+-			if (tn->internal[i]) {
++			if (tn->internal[i])
+ 				hasData++;
+-			}
+ 		}
+ 
+ 		if (hasData == 0 && del0) {
+@@ -1781,8 +1795,8 @@ static yaffs_Tnode *yaffs_PruneWorker(ya
+ 
+ }
+ 
+-static int yaffs_PruneFileStructure(yaffs_Device * dev,
+-				    yaffs_FileStructure * fStruct)
++static int yaffs_PruneFileStructure(yaffs_Device *dev,
++				yaffs_FileStructure *fStruct)
+ {
+ 	int i;
+ 	int hasData;
+@@ -1805,9 +1819,8 @@ static int yaffs_PruneFileStructure(yaff
+ 
+ 			hasData = 0;
+ 			for (i = 1; i < YAFFS_NTNODES_INTERNAL; i++) {
+-				if (tn->internal[i]) {
++				if (tn->internal[i])
+ 					hasData++;
+-				}
+ 			}
+ 
+ 			if (!hasData) {
+@@ -1828,7 +1841,7 @@ static int yaffs_PruneFileStructure(yaff
+ /* yaffs_CreateFreeObjects creates a bunch more objects and
+  * adds them to the object free list.
+  */
+-static int yaffs_CreateFreeObjects(yaffs_Device * dev, int nObjects)
++static int yaffs_CreateFreeObjects(yaffs_Device *dev, int nObjects)
+ {
+ 	int i;
+ 	yaffs_Object *newObjects;
+@@ -1842,9 +1855,9 @@ static int yaffs_CreateFreeObjects(yaffs
+ 	list = YMALLOC(sizeof(yaffs_ObjectList));
+ 
+ 	if (!newObjects || !list) {
+-		if(newObjects)
++		if (newObjects)
+ 			YFREE(newObjects);
+-		if(list)
++		if (list)
+ 			YFREE(list);
+ 		T(YAFFS_TRACE_ALLOCATE,
+ 		  (TSTR("yaffs: Could not allocate more objects" TENDSTR)));
+@@ -1854,7 +1867,7 @@ static int yaffs_CreateFreeObjects(yaffs
+ 	/* Hook them into the free list */
+ 	for (i = 0; i < nObjects - 1; i++) {
+ 		newObjects[i].siblings.next =
+-		    (struct list_head *)(&newObjects[i + 1]);
++				(struct ylist_head *)(&newObjects[i + 1]);
+ 	}
+ 
+ 	newObjects[nObjects - 1].siblings.next = (void *)dev->freeObjects;
+@@ -1873,85 +1886,109 @@ static int yaffs_CreateFreeObjects(yaffs
+ 
+ 
+ /* AllocateEmptyObject gets us a clean Object. Tries to make allocate more if we run out */
+-static yaffs_Object *yaffs_AllocateEmptyObject(yaffs_Device * dev)
++static yaffs_Object *yaffs_AllocateEmptyObject(yaffs_Device *dev)
+ {
+ 	yaffs_Object *tn = NULL;
+ 
++#ifdef VALGRIND_TEST
++	tn = YMALLOC(sizeof(yaffs_Object));
++#else
+ 	/* If there are none left make more */
+-	if (!dev->freeObjects) {
++	if (!dev->freeObjects)
+ 		yaffs_CreateFreeObjects(dev, YAFFS_ALLOCATION_NOBJECTS);
+-	}
+ 
+ 	if (dev->freeObjects) {
+ 		tn = dev->freeObjects;
+ 		dev->freeObjects =
+-		    (yaffs_Object *) (dev->freeObjects->siblings.next);
++			(yaffs_Object *) (dev->freeObjects->siblings.next);
+ 		dev->nFreeObjects--;
+-
++	}
++#endif
++	if (tn) {
+ 		/* Now sweeten it up... */
+ 
+ 		memset(tn, 0, sizeof(yaffs_Object));
++		tn->beingCreated = 1;
++
+ 		tn->myDev = dev;
+-		tn->chunkId = -1;
++		tn->hdrChunk = 0;
+ 		tn->variantType = YAFFS_OBJECT_TYPE_UNKNOWN;
+-		INIT_LIST_HEAD(&(tn->hardLinks));
+-		INIT_LIST_HEAD(&(tn->hashLink));
+-		INIT_LIST_HEAD(&tn->siblings);
++		YINIT_LIST_HEAD(&(tn->hardLinks));
++		YINIT_LIST_HEAD(&(tn->hashLink));
++		YINIT_LIST_HEAD(&tn->siblings);
++
++
++		/* Now make the directory sane */
++		if (dev->rootDir) {
++			tn->parent = dev->rootDir;
++			ylist_add(&(tn->siblings), &dev->rootDir->variant.directoryVariant.children);
++		}
+ 
+ 		/* Add it to the lost and found directory.
+ 		 * NB Can't put root or lostNFound in lostNFound so
+ 		 * check if lostNFound exists first
+ 		 */
+-		if (dev->lostNFoundDir) {
++		if (dev->lostNFoundDir)
+ 			yaffs_AddObjectToDirectory(dev->lostNFoundDir, tn);
+-		}
++
++		tn->beingCreated = 0;
+ 	}
+ 
++	dev->nCheckpointBlocksRequired = 0; /* force recalculation*/
++
+ 	return tn;
+ }
+ 
+-static yaffs_Object *yaffs_CreateFakeDirectory(yaffs_Device * dev, int number,
++static yaffs_Object *yaffs_CreateFakeDirectory(yaffs_Device *dev, int number,
+ 					       __u32 mode)
+ {
+ 
+ 	yaffs_Object *obj =
+ 	    yaffs_CreateNewObject(dev, number, YAFFS_OBJECT_TYPE_DIRECTORY);
+ 	if (obj) {
+-		obj->fake = 1;		/* it is fake so it has no NAND presence... */
++		obj->fake = 1;		/* it is fake so it might have no NAND presence... */
+ 		obj->renameAllowed = 0;	/* ... and we're not allowed to rename it... */
+ 		obj->unlinkAllowed = 0;	/* ... or unlink it */
+ 		obj->deleted = 0;
+ 		obj->unlinked = 0;
+ 		obj->yst_mode = mode;
+ 		obj->myDev = dev;
+-		obj->chunkId = 0;	/* Not a valid chunk. */
++		obj->hdrChunk = 0;	/* Not a valid chunk. */
+ 	}
+ 
+ 	return obj;
+ 
+ }
+ 
+-static void yaffs_UnhashObject(yaffs_Object * tn)
++static void yaffs_UnhashObject(yaffs_Object *tn)
+ {
+ 	int bucket;
+ 	yaffs_Device *dev = tn->myDev;
+ 
+ 	/* If it is still linked into the bucket list, free from the list */
+-	if (!list_empty(&tn->hashLink)) {
+-		list_del_init(&tn->hashLink);
++	if (!ylist_empty(&tn->hashLink)) {
++		ylist_del_init(&tn->hashLink);
+ 		bucket = yaffs_HashFunction(tn->objectId);
+ 		dev->objectBucket[bucket].count--;
+ 	}
+-
+ }
+ 
+ /*  FreeObject frees up a Object and puts it back on the free list */
+-static void yaffs_FreeObject(yaffs_Object * tn)
++static void yaffs_FreeObject(yaffs_Object *tn)
+ {
+-
+ 	yaffs_Device *dev = tn->myDev;
+ 
+-#ifdef  __KERNEL__
++#ifdef __KERNEL__
++	T(YAFFS_TRACE_OS, (TSTR("FreeObject %p inode %p"TENDSTR), tn, tn->myInode));
++#endif
++
++	if (tn->parent)
++		YBUG();
++	if (!ylist_empty(&tn->siblings))
++		YBUG();
++
++
++#ifdef __KERNEL__
+ 	if (tn->myInode) {
+ 		/* We're still hooked up to a cached inode.
+ 		 * Don't delete now, but mark for later deletion
+@@ -1963,24 +2000,28 @@ static void yaffs_FreeObject(yaffs_Objec
+ 
+ 	yaffs_UnhashObject(tn);
+ 
++#ifdef VALGRIND_TEST
++	YFREE(tn);
++#else
+ 	/* Link into the free list. */
+-	tn->siblings.next = (struct list_head *)(dev->freeObjects);
++	tn->siblings.next = (struct ylist_head *)(dev->freeObjects);
+ 	dev->freeObjects = tn;
+ 	dev->nFreeObjects++;
++#endif
++	dev->nCheckpointBlocksRequired = 0; /* force recalculation*/
+ }
+ 
+ #ifdef __KERNEL__
+ 
+-void yaffs_HandleDeferedFree(yaffs_Object * obj)
++void yaffs_HandleDeferedFree(yaffs_Object *obj)
+ {
+-	if (obj->deferedFree) {
++	if (obj->deferedFree)
+ 		yaffs_FreeObject(obj);
+-	}
+ }
+ 
+ #endif
+ 
+-static void yaffs_DeinitialiseObjects(yaffs_Device * dev)
++static void yaffs_DeinitialiseObjects(yaffs_Device *dev)
+ {
+ 	/* Free the list of allocated Objects */
+ 
+@@ -1998,7 +2039,7 @@ static void yaffs_DeinitialiseObjects(ya
+ 	dev->nFreeObjects = 0;
+ }
+ 
+-static void yaffs_InitialiseObjects(yaffs_Device * dev)
++static void yaffs_InitialiseObjects(yaffs_Device *dev)
+ {
+ 	int i;
+ 
+@@ -2007,15 +2048,14 @@ static void yaffs_InitialiseObjects(yaff
+ 	dev->nFreeObjects = 0;
+ 
+ 	for (i = 0; i < YAFFS_NOBJECT_BUCKETS; i++) {
+-		INIT_LIST_HEAD(&dev->objectBucket[i].list);
++		YINIT_LIST_HEAD(&dev->objectBucket[i].list);
+ 		dev->objectBucket[i].count = 0;
+ 	}
+-
+ }
+ 
+-static int yaffs_FindNiceObjectBucket(yaffs_Device * dev)
++static int yaffs_FindNiceObjectBucket(yaffs_Device *dev)
+ {
+-	static int x = 0;
++	static int x;
+ 	int i;
+ 	int l = 999;
+ 	int lowest = 999999;
+@@ -2049,7 +2089,7 @@ static int yaffs_FindNiceObjectBucket(ya
+ 	return l;
+ }
+ 
+-static int yaffs_CreateNewObjectNumber(yaffs_Device * dev)
++static int yaffs_CreateNewObjectNumber(yaffs_Device *dev)
+ {
+ 	int bucket = yaffs_FindNiceObjectBucket(dev);
+ 
+@@ -2058,7 +2098,7 @@ static int yaffs_CreateNewObjectNumber(y
+ 	 */
+ 
+ 	int found = 0;
+-	struct list_head *i;
++	struct ylist_head *i;
+ 
+ 	__u32 n = (__u32) bucket;
+ 
+@@ -2068,41 +2108,38 @@ static int yaffs_CreateNewObjectNumber(y
+ 		found = 1;
+ 		n += YAFFS_NOBJECT_BUCKETS;
+ 		if (1 || dev->objectBucket[bucket].count > 0) {
+-			list_for_each(i, &dev->objectBucket[bucket].list) {
++			ylist_for_each(i, &dev->objectBucket[bucket].list) {
+ 				/* If there is already one in the list */
+-				if (i
+-				    && list_entry(i, yaffs_Object,
+-						  hashLink)->objectId == n) {
++				if (i && ylist_entry(i, yaffs_Object,
++						hashLink)->objectId == n) {
+ 					found = 0;
+ 				}
+ 			}
+ 		}
+ 	}
+ 
+-
+ 	return n;
+ }
+ 
+-static void yaffs_HashObject(yaffs_Object * in)
++static void yaffs_HashObject(yaffs_Object *in)
+ {
+ 	int bucket = yaffs_HashFunction(in->objectId);
+ 	yaffs_Device *dev = in->myDev;
+ 
+-	list_add(&in->hashLink, &dev->objectBucket[bucket].list);
++	ylist_add(&in->hashLink, &dev->objectBucket[bucket].list);
+ 	dev->objectBucket[bucket].count++;
+-
+ }
+ 
+-yaffs_Object *yaffs_FindObjectByNumber(yaffs_Device * dev, __u32 number)
++yaffs_Object *yaffs_FindObjectByNumber(yaffs_Device *dev, __u32 number)
+ {
+ 	int bucket = yaffs_HashFunction(number);
+-	struct list_head *i;
++	struct ylist_head *i;
+ 	yaffs_Object *in;
+ 
+-	list_for_each(i, &dev->objectBucket[bucket].list) {
++	ylist_for_each(i, &dev->objectBucket[bucket].list) {
+ 		/* Look if it is in the list */
+ 		if (i) {
+-			in = list_entry(i, yaffs_Object, hashLink);
++			in = ylist_entry(i, yaffs_Object, hashLink);
+ 			if (in->objectId == number) {
+ #ifdef __KERNEL__
+ 				/* Don't tell the VFS about this one if it is defered free */
+@@ -2118,31 +2155,27 @@ yaffs_Object *yaffs_FindObjectByNumber(y
+ 	return NULL;
+ }
+ 
+-yaffs_Object *yaffs_CreateNewObject(yaffs_Device * dev, int number,
++yaffs_Object *yaffs_CreateNewObject(yaffs_Device *dev, int number,
+ 				    yaffs_ObjectType type)
+ {
+-
+ 	yaffs_Object *theObject;
+-	yaffs_Tnode *tn;
++	yaffs_Tnode *tn = NULL;
+ 
+-	if (number < 0) {
++	if (number < 0)
+ 		number = yaffs_CreateNewObjectNumber(dev);
+-	}
+ 
+ 	theObject = yaffs_AllocateEmptyObject(dev);
+-	if(!theObject)
++	if (!theObject)
+ 		return NULL;
+ 
+-	if(type == YAFFS_OBJECT_TYPE_FILE){
++	if (type == YAFFS_OBJECT_TYPE_FILE) {
+ 		tn = yaffs_GetTnode(dev);
+-		if(!tn){
++		if (!tn) {
+ 			yaffs_FreeObject(theObject);
+ 			return NULL;
+ 		}
+ 	}
+ 
+-
+-
+ 	if (theObject) {
+ 		theObject->fake = 0;
+ 		theObject->renameAllowed = 1;
+@@ -2171,8 +2204,8 @@ yaffs_Object *yaffs_CreateNewObject(yaff
+ 			theObject->variant.fileVariant.top = tn;
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_DIRECTORY:
+-			INIT_LIST_HEAD(&theObject->variant.directoryVariant.
+-				       children);
++			YINIT_LIST_HEAD(&theObject->variant.directoryVariant.
++					children);
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_SYMLINK:
+ 		case YAFFS_OBJECT_TYPE_HARDLINK:
+@@ -2188,32 +2221,30 @@ yaffs_Object *yaffs_CreateNewObject(yaff
+ 	return theObject;
+ }
+ 
+-static yaffs_Object *yaffs_FindOrCreateObjectByNumber(yaffs_Device * dev,
++static yaffs_Object *yaffs_FindOrCreateObjectByNumber(yaffs_Device *dev,
+ 						      int number,
+ 						      yaffs_ObjectType type)
+ {
+ 	yaffs_Object *theObject = NULL;
+ 
+-	if (number > 0) {
++	if (number > 0)
+ 		theObject = yaffs_FindObjectByNumber(dev, number);
+-	}
+ 
+-	if (!theObject) {
++	if (!theObject)
+ 		theObject = yaffs_CreateNewObject(dev, number, type);
+-	}
+ 
+ 	return theObject;
+ 
+ }
+ 
+ 
+-static YCHAR *yaffs_CloneString(const YCHAR * str)
++static YCHAR *yaffs_CloneString(const YCHAR *str)
+ {
+ 	YCHAR *newStr = NULL;
+ 
+ 	if (str && *str) {
+ 		newStr = YMALLOC((yaffs_strlen(str) + 1) * sizeof(YCHAR));
+-		if(newStr)
++		if (newStr)
+ 			yaffs_strcpy(newStr, str);
+ 	}
+ 
+@@ -2229,29 +2260,31 @@ static YCHAR *yaffs_CloneString(const YC
+  */
+ 
+ static yaffs_Object *yaffs_MknodObject(yaffs_ObjectType type,
+-				       yaffs_Object * parent,
+-				       const YCHAR * name,
++				       yaffs_Object *parent,
++				       const YCHAR *name,
+ 				       __u32 mode,
+ 				       __u32 uid,
+ 				       __u32 gid,
+-				       yaffs_Object * equivalentObject,
+-				       const YCHAR * aliasString, __u32 rdev)
++				       yaffs_Object *equivalentObject,
++				       const YCHAR *aliasString, __u32 rdev)
+ {
+ 	yaffs_Object *in;
+-	YCHAR *str;
++	YCHAR *str = NULL;
+ 
+ 	yaffs_Device *dev = parent->myDev;
+ 
+ 	/* Check if the entry exists. If it does then fail the call since we don't want a dup.*/
+-	if (yaffs_FindObjectByName(parent, name)) {
++	if (yaffs_FindObjectByName(parent, name))
+ 		return NULL;
+-	}
+ 
+ 	in = yaffs_CreateNewObject(dev, -1, type);
+ 
+-	if(type == YAFFS_OBJECT_TYPE_SYMLINK){
++	if (!in)
++		return YAFFS_FAIL;
++
++	if (type == YAFFS_OBJECT_TYPE_SYMLINK) {
+ 		str = yaffs_CloneString(aliasString);
+-		if(!str){
++		if (!str) {
+ 			yaffs_FreeObject(in);
+ 			return NULL;
+ 		}
+@@ -2260,7 +2293,7 @@ static yaffs_Object *yaffs_MknodObject(y
+ 
+ 
+ 	if (in) {
+-		in->chunkId = -1;
++		in->hdrChunk = 0;
+ 		in->valid = 1;
+ 		in->variantType = type;
+ 
+@@ -2293,10 +2326,10 @@ static yaffs_Object *yaffs_MknodObject(y
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_HARDLINK:
+ 			in->variant.hardLinkVariant.equivalentObject =
+-			    equivalentObject;
++				equivalentObject;
+ 			in->variant.hardLinkVariant.equivalentObjectId =
+-			    equivalentObject->objectId;
+-			list_add(&in->hardLinks, &equivalentObject->hardLinks);
++				equivalentObject->objectId;
++			ylist_add(&in->hardLinks, &equivalentObject->hardLinks);
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_FILE:
+ 		case YAFFS_OBJECT_TYPE_DIRECTORY:
+@@ -2308,7 +2341,7 @@ static yaffs_Object *yaffs_MknodObject(y
+ 
+ 		if (yaffs_UpdateObjectHeader(in, name, 0, 0, 0) < 0) {
+ 			/* Could not create the object header, fail the creation */
+-			yaffs_DestroyObject(in);
++			yaffs_DeleteObject(in);
+ 			in = NULL;
+ 		}
+ 
+@@ -2317,38 +2350,38 @@ static yaffs_Object *yaffs_MknodObject(y
+ 	return in;
+ }
+ 
+-yaffs_Object *yaffs_MknodFile(yaffs_Object * parent, const YCHAR * name,
+-			      __u32 mode, __u32 uid, __u32 gid)
++yaffs_Object *yaffs_MknodFile(yaffs_Object *parent, const YCHAR *name,
++			__u32 mode, __u32 uid, __u32 gid)
+ {
+ 	return yaffs_MknodObject(YAFFS_OBJECT_TYPE_FILE, parent, name, mode,
+-				 uid, gid, NULL, NULL, 0);
++				uid, gid, NULL, NULL, 0);
+ }
+ 
+-yaffs_Object *yaffs_MknodDirectory(yaffs_Object * parent, const YCHAR * name,
+-				   __u32 mode, __u32 uid, __u32 gid)
++yaffs_Object *yaffs_MknodDirectory(yaffs_Object *parent, const YCHAR *name,
++				__u32 mode, __u32 uid, __u32 gid)
+ {
+ 	return yaffs_MknodObject(YAFFS_OBJECT_TYPE_DIRECTORY, parent, name,
+ 				 mode, uid, gid, NULL, NULL, 0);
+ }
+ 
+-yaffs_Object *yaffs_MknodSpecial(yaffs_Object * parent, const YCHAR * name,
+-				 __u32 mode, __u32 uid, __u32 gid, __u32 rdev)
++yaffs_Object *yaffs_MknodSpecial(yaffs_Object *parent, const YCHAR *name,
++				__u32 mode, __u32 uid, __u32 gid, __u32 rdev)
+ {
+ 	return yaffs_MknodObject(YAFFS_OBJECT_TYPE_SPECIAL, parent, name, mode,
+ 				 uid, gid, NULL, NULL, rdev);
+ }
+ 
+-yaffs_Object *yaffs_MknodSymLink(yaffs_Object * parent, const YCHAR * name,
+-				 __u32 mode, __u32 uid, __u32 gid,
+-				 const YCHAR * alias)
++yaffs_Object *yaffs_MknodSymLink(yaffs_Object *parent, const YCHAR *name,
++				__u32 mode, __u32 uid, __u32 gid,
++				const YCHAR *alias)
+ {
+ 	return yaffs_MknodObject(YAFFS_OBJECT_TYPE_SYMLINK, parent, name, mode,
+-				 uid, gid, NULL, alias, 0);
++				uid, gid, NULL, alias, 0);
+ }
+ 
+ /* yaffs_Link returns the object id of the equivalent object.*/
+-yaffs_Object *yaffs_Link(yaffs_Object * parent, const YCHAR * name,
+-			 yaffs_Object * equivalentObject)
++yaffs_Object *yaffs_Link(yaffs_Object *parent, const YCHAR *name,
++			yaffs_Object *equivalentObject)
+ {
+ 	/* Get the real object in case we were fed a hard link as an equivalent object */
+ 	equivalentObject = yaffs_GetEquivalentObject(equivalentObject);
+@@ -2363,33 +2396,31 @@ yaffs_Object *yaffs_Link(yaffs_Object *
+ 
+ }
+ 
+-static int yaffs_ChangeObjectName(yaffs_Object * obj, yaffs_Object * newDir,
+-				  const YCHAR * newName, int force, int shadows)
++static int yaffs_ChangeObjectName(yaffs_Object *obj, yaffs_Object *newDir,
++				const YCHAR *newName, int force, int shadows)
+ {
+ 	int unlinkOp;
+ 	int deleteOp;
+ 
+ 	yaffs_Object *existingTarget;
+ 
+-	if (newDir == NULL) {
++	if (newDir == NULL)
+ 		newDir = obj->parent;	/* use the old directory */
+-	}
+ 
+ 	if (newDir->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 		T(YAFFS_TRACE_ALWAYS,
+ 		  (TSTR
+-		   ("tragendy: yaffs_ChangeObjectName: newDir is not a directory"
++		   ("tragedy: yaffs_ChangeObjectName: newDir is not a directory"
+ 		    TENDSTR)));
+ 		YBUG();
+ 	}
+ 
+ 	/* TODO: Do we need this different handling for YAFFS2 and YAFFS1?? */
+-	if (obj->myDev->isYaffs2) {
++	if (obj->myDev->isYaffs2)
+ 		unlinkOp = (newDir == obj->myDev->unlinkedDir);
+-	} else {
++	else
+ 		unlinkOp = (newDir == obj->myDev->unlinkedDir
+ 			    && obj->variantType == YAFFS_OBJECT_TYPE_FILE);
+-	}
+ 
+ 	deleteOp = (newDir == obj->myDev->deletedDir);
+ 
+@@ -2415,40 +2446,40 @@ static int yaffs_ChangeObjectName(yaffs_
+ 			obj->unlinked = 1;
+ 
+ 		/* If it is a deletion then we mark it as a shrink for gc purposes. */
+-		if (yaffs_UpdateObjectHeader(obj, newName, 0, deleteOp, shadows)>= 0)
++		if (yaffs_UpdateObjectHeader(obj, newName, 0, deleteOp, shadows) >= 0)
+ 			return YAFFS_OK;
+ 	}
+ 
+ 	return YAFFS_FAIL;
+ }
+ 
+-int yaffs_RenameObject(yaffs_Object * oldDir, const YCHAR * oldName,
+-		       yaffs_Object * newDir, const YCHAR * newName)
++int yaffs_RenameObject(yaffs_Object *oldDir, const YCHAR *oldName,
++		yaffs_Object *newDir, const YCHAR *newName)
+ {
+-	yaffs_Object *obj;
+-	yaffs_Object *existingTarget;
++	yaffs_Object *obj = NULL;
++	yaffs_Object *existingTarget = NULL;
+ 	int force = 0;
+ 
++
++	if (!oldDir || oldDir->variantType != YAFFS_OBJECT_TYPE_DIRECTORY)
++		YBUG();
++	if (!newDir || newDir->variantType != YAFFS_OBJECT_TYPE_DIRECTORY)
++		YBUG();
++
+ #ifdef CONFIG_YAFFS_CASE_INSENSITIVE
+ 	/* Special case for case insemsitive systems (eg. WinCE).
+ 	 * While look-up is case insensitive, the name isn't.
+ 	 * Therefore we might want to change x.txt to X.txt
+ 	*/
+-	if (oldDir == newDir && yaffs_strcmp(oldName, newName) == 0) {
++	if (oldDir == newDir && yaffs_strcmp(oldName, newName) == 0)
+ 		force = 1;
+-	}
+ #endif
+ 
++	else if (yaffs_strlen(newName) > YAFFS_MAX_NAME_LENGTH)
++		/* ENAMETOOLONG */
++		return YAFFS_FAIL;
++
+ 	obj = yaffs_FindObjectByName(oldDir, oldName);
+-	/* Check new name to long. */
+-	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK &&
+-	    yaffs_strlen(newName) > YAFFS_MAX_ALIAS_LENGTH)
+-	  /* ENAMETOOLONG */
+-	  return YAFFS_FAIL;
+-	else if (obj->variantType != YAFFS_OBJECT_TYPE_SYMLINK &&
+-		 yaffs_strlen(newName) > YAFFS_MAX_NAME_LENGTH)
+-	  /* ENAMETOOLONG */
+-	  return YAFFS_FAIL;
+ 
+ 	if (obj && obj->renameAllowed) {
+ 
+@@ -2456,8 +2487,8 @@ int yaffs_RenameObject(yaffs_Object * ol
+ 
+ 		existingTarget = yaffs_FindObjectByName(newDir, newName);
+ 		if (existingTarget &&
+-		    existingTarget->variantType == YAFFS_OBJECT_TYPE_DIRECTORY &&
+-		    !list_empty(&existingTarget->variant.directoryVariant.children)) {
++			existingTarget->variantType == YAFFS_OBJECT_TYPE_DIRECTORY &&
++			!ylist_empty(&existingTarget->variant.directoryVariant.children)) {
+ 			/* There is a target that is a non-empty directory, so we fail */
+ 			return YAFFS_FAIL;	/* EEXIST or ENOTEMPTY */
+ 		} else if (existingTarget && existingTarget != obj) {
+@@ -2465,7 +2496,7 @@ int yaffs_RenameObject(yaffs_Object * ol
+ 			 * but only if it isn't the same object
+ 			 */
+ 			yaffs_ChangeObjectName(obj, newDir, newName, force,
+-					       existingTarget->objectId);
++						existingTarget->objectId);
+ 			yaffs_UnlinkObject(existingTarget);
+ 		}
+ 
+@@ -2476,7 +2507,7 @@ int yaffs_RenameObject(yaffs_Object * ol
+ 
+ /*------------------------- Block Management and Page Allocation ----------------*/
+ 
+-static int yaffs_InitialiseBlocks(yaffs_Device * dev)
++static int yaffs_InitialiseBlocks(yaffs_Device *dev)
+ {
+ 	int nBlocks = dev->internalEndBlock - dev->internalStartBlock + 1;
+ 
+@@ -2487,23 +2518,20 @@ static int yaffs_InitialiseBlocks(yaffs_
+ 
+ 	/* If the first allocation strategy fails, thry the alternate one */
+ 	dev->blockInfo = YMALLOC(nBlocks * sizeof(yaffs_BlockInfo));
+-	if(!dev->blockInfo){
++	if (!dev->blockInfo) {
+ 		dev->blockInfo = YMALLOC_ALT(nBlocks * sizeof(yaffs_BlockInfo));
+ 		dev->blockInfoAlt = 1;
+-	}
+-	else
++	} else
+ 		dev->blockInfoAlt = 0;
+ 
+-	if(dev->blockInfo){
+-
++	if (dev->blockInfo) {
+ 		/* Set up dynamic blockinfo stuff. */
+ 		dev->chunkBitmapStride = (dev->nChunksPerBlock + 7) / 8; /* round up bytes */
+ 		dev->chunkBits = YMALLOC(dev->chunkBitmapStride * nBlocks);
+-		if(!dev->chunkBits){
++		if (!dev->chunkBits) {
+ 			dev->chunkBits = YMALLOC_ALT(dev->chunkBitmapStride * nBlocks);
+ 			dev->chunkBitsAlt = 1;
+-		}
+-		else
++		} else
+ 			dev->chunkBitsAlt = 0;
+ 	}
+ 
+@@ -2514,30 +2542,29 @@ static int yaffs_InitialiseBlocks(yaffs_
+ 	}
+ 
+ 	return YAFFS_FAIL;
+-
+ }
+ 
+-static void yaffs_DeinitialiseBlocks(yaffs_Device * dev)
++static void yaffs_DeinitialiseBlocks(yaffs_Device *dev)
+ {
+-	if(dev->blockInfoAlt && dev->blockInfo)
++	if (dev->blockInfoAlt && dev->blockInfo)
+ 		YFREE_ALT(dev->blockInfo);
+-	else if(dev->blockInfo)
++	else if (dev->blockInfo)
+ 		YFREE(dev->blockInfo);
+ 
+ 	dev->blockInfoAlt = 0;
+ 
+ 	dev->blockInfo = NULL;
+ 
+-	if(dev->chunkBitsAlt && dev->chunkBits)
++	if (dev->chunkBitsAlt && dev->chunkBits)
+ 		YFREE_ALT(dev->chunkBits);
+-	else if(dev->chunkBits)
++	else if (dev->chunkBits)
+ 		YFREE(dev->chunkBits);
+ 	dev->chunkBitsAlt = 0;
+ 	dev->chunkBits = NULL;
+ }
+ 
+-static int yaffs_BlockNotDisqualifiedFromGC(yaffs_Device * dev,
+-					    yaffs_BlockInfo * bi)
++static int yaffs_BlockNotDisqualifiedFromGC(yaffs_Device *dev,
++					yaffs_BlockInfo *bi)
+ {
+ 	int i;
+ 	__u32 seq;
+@@ -2556,7 +2583,7 @@ static int yaffs_BlockNotDisqualifiedFro
+ 		seq = dev->sequenceNumber;
+ 
+ 		for (i = dev->internalStartBlock; i <= dev->internalEndBlock;
+-		     i++) {
++				i++) {
+ 			b = yaffs_GetBlockInfo(dev, i);
+ 			if (b->blockState == YAFFS_BLOCK_STATE_FULL &&
+ 			    (b->pagesInUse - b->softDeletions) <
+@@ -2571,38 +2598,36 @@ static int yaffs_BlockNotDisqualifiedFro
+ 	 * discarded pages.
+ 	 */
+ 	return (bi->sequenceNumber <= dev->oldestDirtySequence);
+-
+ }
+ 
+ /* FindDiretiestBlock is used to select the dirtiest block (or close enough)
+  * for garbage collection.
+  */
+ 
+-static int yaffs_FindBlockForGarbageCollection(yaffs_Device * dev,
+-					       int aggressive)
++static int yaffs_FindBlockForGarbageCollection(yaffs_Device *dev,
++					int aggressive)
+ {
+-
+ 	int b = dev->currentDirtyChecker;
+ 
+ 	int i;
+ 	int iterations;
+ 	int dirtiest = -1;
+ 	int pagesInUse = 0;
+-	int prioritised=0;
++	int prioritised = 0;
+ 	yaffs_BlockInfo *bi;
+ 	int pendingPrioritisedExist = 0;
+ 
+ 	/* First let's see if we need to grab a prioritised block */
+-	if(dev->hasPendingPrioritisedGCs){
+-		for(i = dev->internalStartBlock; i < dev->internalEndBlock && !prioritised; i++){
++	if (dev->hasPendingPrioritisedGCs) {
++		for (i = dev->internalStartBlock; i < dev->internalEndBlock && !prioritised; i++) {
+ 
+ 			bi = yaffs_GetBlockInfo(dev, i);
+-			//yaffs_VerifyBlock(dev,bi,i);
++			/* yaffs_VerifyBlock(dev,bi,i); */
+ 
+-			if(bi->gcPrioritise) {
++			if (bi->gcPrioritise) {
+ 				pendingPrioritisedExist = 1;
+-				if(bi->blockState == YAFFS_BLOCK_STATE_FULL &&
+-				   yaffs_BlockNotDisqualifiedFromGC(dev, bi)){
++				if (bi->blockState == YAFFS_BLOCK_STATE_FULL &&
++				   yaffs_BlockNotDisqualifiedFromGC(dev, bi)) {
+ 					pagesInUse = (bi->pagesInUse - bi->softDeletions);
+ 					dirtiest = i;
+ 					prioritised = 1;
+@@ -2611,7 +2636,7 @@ static int yaffs_FindBlockForGarbageColl
+ 			}
+ 		}
+ 
+-		if(!pendingPrioritisedExist) /* None found, so we can clear this */
++		if (!pendingPrioritisedExist) /* None found, so we can clear this */
+ 			dev->hasPendingPrioritisedGCs = 0;
+ 	}
+ 
+@@ -2623,31 +2648,28 @@ static int yaffs_FindBlockForGarbageColl
+ 
+ 	dev->nonAggressiveSkip--;
+ 
+-	if (!aggressive && (dev->nonAggressiveSkip > 0)) {
++	if (!aggressive && (dev->nonAggressiveSkip > 0))
+ 		return -1;
+-	}
+ 
+-	if(!prioritised)
++	if (!prioritised)
+ 		pagesInUse =
+-	    		(aggressive) ? dev->nChunksPerBlock : YAFFS_PASSIVE_GC_CHUNKS + 1;
++			(aggressive) ? dev->nChunksPerBlock : YAFFS_PASSIVE_GC_CHUNKS + 1;
+ 
+-	if (aggressive) {
++	if (aggressive)
+ 		iterations =
+ 		    dev->internalEndBlock - dev->internalStartBlock + 1;
+-	} else {
++	else {
+ 		iterations =
+ 		    dev->internalEndBlock - dev->internalStartBlock + 1;
+ 		iterations = iterations / 16;
+-		if (iterations > 200) {
++		if (iterations > 200)
+ 			iterations = 200;
+-		}
+ 	}
+ 
+ 	for (i = 0; i <= iterations && pagesInUse > 0 && !prioritised; i++) {
+ 		b++;
+-		if (b < dev->internalStartBlock || b > dev->internalEndBlock) {
++		if (b < dev->internalStartBlock || b > dev->internalEndBlock)
+ 			b = dev->internalStartBlock;
+-		}
+ 
+ 		if (b < dev->internalStartBlock || b > dev->internalEndBlock) {
+ 			T(YAFFS_TRACE_ERROR,
+@@ -2657,17 +2679,9 @@ static int yaffs_FindBlockForGarbageColl
+ 
+ 		bi = yaffs_GetBlockInfo(dev, b);
+ 
+-#if 0
+-		if (bi->blockState == YAFFS_BLOCK_STATE_CHECKPOINT) {
+-			dirtiest = b;
+-			pagesInUse = 0;
+-		}
+-		else
+-#endif
+-
+ 		if (bi->blockState == YAFFS_BLOCK_STATE_FULL &&
+-		       (bi->pagesInUse - bi->softDeletions) < pagesInUse &&
+-		        yaffs_BlockNotDisqualifiedFromGC(dev, bi)) {
++			(bi->pagesInUse - bi->softDeletions) < pagesInUse &&
++				yaffs_BlockNotDisqualifiedFromGC(dev, bi)) {
+ 			dirtiest = b;
+ 			pagesInUse = (bi->pagesInUse - bi->softDeletions);
+ 		}
+@@ -2678,19 +2692,18 @@ static int yaffs_FindBlockForGarbageColl
+ 	if (dirtiest > 0) {
+ 		T(YAFFS_TRACE_GC,
+ 		  (TSTR("GC Selected block %d with %d free, prioritised:%d" TENDSTR), dirtiest,
+-		   dev->nChunksPerBlock - pagesInUse,prioritised));
++		   dev->nChunksPerBlock - pagesInUse, prioritised));
+ 	}
+ 
+ 	dev->oldestDirtySequence = 0;
+ 
+-	if (dirtiest > 0) {
++	if (dirtiest > 0)
+ 		dev->nonAggressiveSkip = 4;
+-	}
+ 
+ 	return dirtiest;
+ }
+ 
+-static void yaffs_BlockBecameDirty(yaffs_Device * dev, int blockNo)
++static void yaffs_BlockBecameDirty(yaffs_Device *dev, int blockNo)
+ {
+ 	yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, blockNo);
+ 
+@@ -2752,7 +2765,7 @@ static void yaffs_BlockBecameDirty(yaffs
+ 	}
+ }
+ 
+-static int yaffs_FindBlockForAllocation(yaffs_Device * dev)
++static int yaffs_FindBlockForAllocation(yaffs_Device *dev)
+ {
+ 	int i;
+ 
+@@ -2763,7 +2776,7 @@ static int yaffs_FindBlockForAllocation(
+ 		 * Can't get space to gc
+ 		 */
+ 		T(YAFFS_TRACE_ERROR,
+-		  (TSTR("yaffs tragedy: no more eraased blocks" TENDSTR)));
++		  (TSTR("yaffs tragedy: no more erased blocks" TENDSTR)));
+ 
+ 		return -1;
+ 	}
+@@ -2794,31 +2807,74 @@ static int yaffs_FindBlockForAllocation(
+ 
+ 	T(YAFFS_TRACE_ALWAYS,
+ 	  (TSTR
+-	   ("yaffs tragedy: no more eraased blocks, but there should have been %d"
++	   ("yaffs tragedy: no more erased blocks, but there should have been %d"
+ 	    TENDSTR), dev->nErasedBlocks));
+ 
+ 	return -1;
+ }
+ 
+ 
+-// Check if there's space to allocate...
+-// Thinks.... do we need top make this ths same as yaffs_GetFreeChunks()?
+-static int yaffs_CheckSpaceForAllocation(yaffs_Device * dev)
++
++static int yaffs_CalcCheckpointBlocksRequired(yaffs_Device *dev)
++{
++	if (!dev->nCheckpointBlocksRequired &&
++	   dev->isYaffs2) {
++		/* Not a valid value so recalculate */
++		int nBytes = 0;
++		int nBlocks;
++		int devBlocks = (dev->endBlock - dev->startBlock + 1);
++		int tnodeSize;
++
++		tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
++
++		if (tnodeSize < sizeof(yaffs_Tnode))
++			tnodeSize = sizeof(yaffs_Tnode);
++
++		nBytes += sizeof(yaffs_CheckpointValidity);
++		nBytes += sizeof(yaffs_CheckpointDevice);
++		nBytes += devBlocks * sizeof(yaffs_BlockInfo);
++		nBytes += devBlocks * dev->chunkBitmapStride;
++		nBytes += (sizeof(yaffs_CheckpointObject) + sizeof(__u32)) * (dev->nObjectsCreated - dev->nFreeObjects);
++		nBytes += (tnodeSize + sizeof(__u32)) * (dev->nTnodesCreated - dev->nFreeTnodes);
++		nBytes += sizeof(yaffs_CheckpointValidity);
++		nBytes += sizeof(__u32); /* checksum*/
++
++		/* Round up and add 2 blocks to allow for some bad blocks, so add 3 */
++
++		nBlocks = (nBytes/(dev->nDataBytesPerChunk * dev->nChunksPerBlock)) + 3;
++
++		dev->nCheckpointBlocksRequired = nBlocks;
++	}
++
++	return dev->nCheckpointBlocksRequired;
++}
++
++/*
++ * Check if there's space to allocate...
++ * Thinks.... do we need top make this ths same as yaffs_GetFreeChunks()?
++ */
++static int yaffs_CheckSpaceForAllocation(yaffs_Device *dev)
+ {
+ 	int reservedChunks;
+ 	int reservedBlocks = dev->nReservedBlocks;
+ 	int checkpointBlocks;
+ 
+-	checkpointBlocks =  dev->nCheckpointReservedBlocks - dev->blocksInCheckpoint;
+-	if(checkpointBlocks < 0)
++	if (dev->isYaffs2) {
++		checkpointBlocks =  yaffs_CalcCheckpointBlocksRequired(dev) -
++				    dev->blocksInCheckpoint;
++		if (checkpointBlocks < 0)
++			checkpointBlocks = 0;
++	} else {
+ 		checkpointBlocks = 0;
++	}
+ 
+ 	reservedChunks = ((reservedBlocks + checkpointBlocks) * dev->nChunksPerBlock);
+ 
+ 	return (dev->nFreeChunks > reservedChunks);
+ }
+ 
+-static int yaffs_AllocateChunk(yaffs_Device * dev, int useReserve, yaffs_BlockInfo **blockUsedPtr)
++static int yaffs_AllocateChunk(yaffs_Device *dev, int useReserve,
++		yaffs_BlockInfo **blockUsedPtr)
+ {
+ 	int retVal;
+ 	yaffs_BlockInfo *bi;
+@@ -2835,7 +2891,7 @@ static int yaffs_AllocateChunk(yaffs_Dev
+ 	}
+ 
+ 	if (dev->nErasedBlocks < dev->nReservedBlocks
+-	    && dev->allocationPage == 0) {
++			&& dev->allocationPage == 0) {
+ 		T(YAFFS_TRACE_ALLOCATE, (TSTR("Allocating reserve" TENDSTR)));
+ 	}
+ 
+@@ -2844,10 +2900,10 @@ static int yaffs_AllocateChunk(yaffs_Dev
+ 		bi = yaffs_GetBlockInfo(dev, dev->allocationBlock);
+ 
+ 		retVal = (dev->allocationBlock * dev->nChunksPerBlock) +
+-		    dev->allocationPage;
++			dev->allocationPage;
+ 		bi->pagesInUse++;
+ 		yaffs_SetChunkBit(dev, dev->allocationBlock,
+-				  dev->allocationPage);
++				dev->allocationPage);
+ 
+ 		dev->allocationPage++;
+ 
+@@ -2859,43 +2915,43 @@ static int yaffs_AllocateChunk(yaffs_Dev
+ 			dev->allocationBlock = -1;
+ 		}
+ 
+-		if(blockUsedPtr)
++		if (blockUsedPtr)
+ 			*blockUsedPtr = bi;
+ 
+ 		return retVal;
+ 	}
+ 
+ 	T(YAFFS_TRACE_ERROR,
+-	  (TSTR("!!!!!!!!! Allocator out !!!!!!!!!!!!!!!!!" TENDSTR)));
++			(TSTR("!!!!!!!!! Allocator out !!!!!!!!!!!!!!!!!" TENDSTR)));
+ 
+ 	return -1;
+ }
+ 
+-static int yaffs_GetErasedChunks(yaffs_Device * dev)
++static int yaffs_GetErasedChunks(yaffs_Device *dev)
+ {
+ 	int n;
+ 
+ 	n = dev->nErasedBlocks * dev->nChunksPerBlock;
+ 
+-	if (dev->allocationBlock > 0) {
++	if (dev->allocationBlock > 0)
+ 		n += (dev->nChunksPerBlock - dev->allocationPage);
+-	}
+ 
+ 	return n;
+ 
+ }
+ 
+-static int yaffs_GarbageCollectBlock(yaffs_Device * dev, int block)
++static int yaffs_GarbageCollectBlock(yaffs_Device *dev, int block,
++		int wholeBlock)
+ {
+ 	int oldChunk;
+ 	int newChunk;
+-	int chunkInBlock;
+ 	int markNAND;
+ 	int retVal = YAFFS_OK;
+ 	int cleanups = 0;
+ 	int i;
+ 	int isCheckpointBlock;
+ 	int matchingChunk;
++	int maxCopies;
+ 
+ 	int chunksBefore = yaffs_GetErasedChunks(dev);
+ 	int chunksAfter;
+@@ -2911,8 +2967,11 @@ static int yaffs_GarbageCollectBlock(yaf
+ 	bi->blockState = YAFFS_BLOCK_STATE_COLLECTING;
+ 
+ 	T(YAFFS_TRACE_TRACING,
+-	  (TSTR("Collecting block %d, in use %d, shrink %d, " TENDSTR), block,
+-	   bi->pagesInUse, bi->hasShrinkHeader));
++			(TSTR("Collecting block %d, in use %d, shrink %d, wholeBlock %d" TENDSTR),
++			 block,
++			 bi->pagesInUse,
++			 bi->hasShrinkHeader,
++			 wholeBlock));
+ 
+ 	/*yaffs_VerifyFreeChunks(dev); */
+ 
+@@ -2926,26 +2985,33 @@ static int yaffs_GarbageCollectBlock(yaf
+ 	dev->isDoingGC = 1;
+ 
+ 	if (isCheckpointBlock ||
+-	    !yaffs_StillSomeChunkBits(dev, block)) {
++			!yaffs_StillSomeChunkBits(dev, block)) {
+ 		T(YAFFS_TRACE_TRACING,
+-		  (TSTR
+-		   ("Collecting block %d that has no chunks in use" TENDSTR),
+-		   block));
++				(TSTR
++				 ("Collecting block %d that has no chunks in use" TENDSTR),
++				 block));
+ 		yaffs_BlockBecameDirty(dev, block);
+ 	} else {
+ 
+ 		__u8 *buffer = yaffs_GetTempBuffer(dev, __LINE__);
+ 
+-		yaffs_VerifyBlock(dev,bi,block);
++		yaffs_VerifyBlock(dev, bi, block);
+ 
+-		for (chunkInBlock = 0, oldChunk = block * dev->nChunksPerBlock;
+-		     chunkInBlock < dev->nChunksPerBlock
+-		     && yaffs_StillSomeChunkBits(dev, block);
+-		     chunkInBlock++, oldChunk++) {
+-			if (yaffs_CheckChunkBit(dev, block, chunkInBlock)) {
++		maxCopies = (wholeBlock) ? dev->nChunksPerBlock : 10;
++		oldChunk = block * dev->nChunksPerBlock + dev->gcChunk;
++
++		for (/* init already done */;
++		     retVal == YAFFS_OK &&
++		     dev->gcChunk < dev->nChunksPerBlock &&
++		     (bi->blockState == YAFFS_BLOCK_STATE_COLLECTING) &&
++		     maxCopies > 0;
++		     dev->gcChunk++, oldChunk++) {
++			if (yaffs_CheckChunkBit(dev, block, dev->gcChunk)) {
+ 
+ 				/* This page is in use and might need to be copied off */
+ 
++				maxCopies--;
++
+ 				markNAND = 1;
+ 
+ 				yaffs_InitialiseTags(&tags);
+@@ -2959,22 +3025,22 @@ static int yaffs_GarbageCollectBlock(yaf
+ 
+ 				T(YAFFS_TRACE_GC_DETAIL,
+ 				  (TSTR
+-				   ("Collecting page %d, %d %d %d " TENDSTR),
+-				   chunkInBlock, tags.objectId, tags.chunkId,
++				   ("Collecting chunk in block %d, %d %d %d " TENDSTR),
++				   dev->gcChunk, tags.objectId, tags.chunkId,
+ 				   tags.byteCount));
+ 
+-				if(object && !yaffs_SkipVerification(dev)){
+-					if(tags.chunkId == 0)
+-						matchingChunk = object->chunkId;
+-					else if(object->softDeleted)
++				if (object && !yaffs_SkipVerification(dev)) {
++					if (tags.chunkId == 0)
++						matchingChunk = object->hdrChunk;
++					else if (object->softDeleted)
+ 						matchingChunk = oldChunk; /* Defeat the test */
+ 					else
+-						matchingChunk = yaffs_FindChunkInFile(object,tags.chunkId,NULL);
++						matchingChunk = yaffs_FindChunkInFile(object, tags.chunkId, NULL);
+ 
+-					if(oldChunk != matchingChunk)
++					if (oldChunk != matchingChunk)
+ 						T(YAFFS_TRACE_ERROR,
+ 						  (TSTR("gc: page in gc mismatch: %d %d %d %d"TENDSTR),
+-						  oldChunk,matchingChunk,tags.objectId, tags.chunkId));
++						  oldChunk, matchingChunk, tags.objectId, tags.chunkId));
+ 
+ 				}
+ 
+@@ -2986,9 +3052,11 @@ static int yaffs_GarbageCollectBlock(yaf
+ 					    tags.objectId, tags.chunkId, tags.byteCount));
+ 				}
+ 
+-				if (object && object->deleted
+-				    && tags.chunkId != 0) {
+-					/* Data chunk in a deleted file, throw it away
++				if (object &&
++				    object->deleted &&
++				    object->softDeleted &&
++				    tags.chunkId != 0) {
++					/* Data chunk in a soft deleted file, throw it away
+ 					 * It's a soft deleted data chunk,
+ 					 * No need to copy this, just forget about it and
+ 					 * fix up the object.
+@@ -3003,13 +3071,12 @@ static int yaffs_GarbageCollectBlock(yaf
+ 						cleanups++;
+ 					}
+ 					markNAND = 0;
+-				} else if (0
+-					   /* Todo object && object->deleted && object->nDataChunks == 0 */
+-					   ) {
++				} else if (0) {
++					/* Todo object && object->deleted && object->nDataChunks == 0 */
+ 					/* Deleted object header with no data chunks.
+ 					 * Can be discarded and the file deleted.
+ 					 */
+-					object->chunkId = 0;
++					object->hdrChunk = 0;
+ 					yaffs_FreeTnode(object->myDev,
+ 							object->variant.
+ 							fileVariant.top);
+@@ -3031,17 +3098,14 @@ static int yaffs_GarbageCollectBlock(yaf
+ 						 * We need to nuke the shrinkheader flags first
+ 						 * We no longer want the shrinkHeader flag since its work is done
+ 						 * and if it is left in place it will mess up scanning.
+-						 * Also, clear out any shadowing stuff
+ 						 */
+ 
+ 						yaffs_ObjectHeader *oh;
+ 						oh = (yaffs_ObjectHeader *)buffer;
+ 						oh->isShrink = 0;
+-						oh->shadowsObject = -1;
+-						tags.extraShadows = 0;
+ 						tags.extraIsShrinkHeader = 0;
+ 
+-						yaffs_VerifyObjectHeader(object,oh,&tags,1);
++						yaffs_VerifyObjectHeader(object, oh, &tags, 1);
+ 					}
+ 
+ 					newChunk =
+@@ -3055,7 +3119,7 @@ static int yaffs_GarbageCollectBlock(yaf
+ 
+ 						if (tags.chunkId == 0) {
+ 							/* It's a header */
+-							object->chunkId =  newChunk;
++							object->hdrChunk =  newChunk;
+ 							object->serial =   tags.serialNumber;
+ 						} else {
+ 							/* It's a data chunk */
+@@ -3067,7 +3131,8 @@ static int yaffs_GarbageCollectBlock(yaf
+ 					}
+ 				}
+ 
+-				yaffs_DeleteChunk(dev, oldChunk, markNAND, __LINE__);
++				if (retVal == YAFFS_OK)
++					yaffs_DeleteChunk(dev, oldChunk, markNAND, __LINE__);
+ 
+ 			}
+ 		}
+@@ -3098,18 +3163,25 @@ static int yaffs_GarbageCollectBlock(yaf
+ 
+ 	}
+ 
+-	yaffs_VerifyCollectedBlock(dev,bi,block);
++	yaffs_VerifyCollectedBlock(dev, bi, block);
+ 
+-	if (chunksBefore >= (chunksAfter = yaffs_GetErasedChunks(dev))) {
++	chunksAfter = yaffs_GetErasedChunks(dev);
++	if (chunksBefore >= chunksAfter) {
+ 		T(YAFFS_TRACE_GC,
+ 		  (TSTR
+ 		   ("gc did not increase free chunks before %d after %d"
+ 		    TENDSTR), chunksBefore, chunksAfter));
+ 	}
+ 
++	/* If the gc completed then clear the current gcBlock so that we find another. */
++	if (bi->blockState != YAFFS_BLOCK_STATE_COLLECTING) {
++		dev->gcBlock = -1;
++		dev->gcChunk = 0;
++	}
++
+ 	dev->isDoingGC = 0;
+ 
+-	return YAFFS_OK;
++	return retVal;
+ }
+ 
+ /* New garbage collector
+@@ -3121,7 +3193,7 @@ static int yaffs_GarbageCollectBlock(yaf
+  * The idea is to help clear out space in a more spread-out manner.
+  * Dunno if it really does anything useful.
+  */
+-static int yaffs_CheckGarbageCollection(yaffs_Device * dev)
++static int yaffs_CheckGarbageCollection(yaffs_Device *dev)
+ {
+ 	int block;
+ 	int aggressive;
+@@ -3142,8 +3214,8 @@ static int yaffs_CheckGarbageCollection(
+ 	do {
+ 		maxTries++;
+ 
+-		checkpointBlockAdjust = (dev->nCheckpointReservedBlocks - dev->blocksInCheckpoint);
+-		if(checkpointBlockAdjust < 0)
++		checkpointBlockAdjust = yaffs_CalcCheckpointBlocksRequired(dev) - dev->blocksInCheckpoint;
++		if (checkpointBlockAdjust < 0)
+ 			checkpointBlockAdjust = 0;
+ 
+ 		if (dev->nErasedBlocks < (dev->nReservedBlocks + checkpointBlockAdjust + 2)) {
+@@ -3154,20 +3226,24 @@ static int yaffs_CheckGarbageCollection(
+ 			aggressive = 0;
+ 		}
+ 
+-		block = yaffs_FindBlockForGarbageCollection(dev, aggressive);
++		if (dev->gcBlock <= 0) {
++			dev->gcBlock = yaffs_FindBlockForGarbageCollection(dev, aggressive);
++			dev->gcChunk = 0;
++		}
++
++		block = dev->gcBlock;
+ 
+ 		if (block > 0) {
+ 			dev->garbageCollections++;
+-			if (!aggressive) {
++			if (!aggressive)
+ 				dev->passiveGarbageCollections++;
+-			}
+ 
+ 			T(YAFFS_TRACE_GC,
+ 			  (TSTR
+ 			   ("yaffs: GC erasedBlocks %d aggressive %d" TENDSTR),
+ 			   dev->nErasedBlocks, aggressive));
+ 
+-			gcOk = yaffs_GarbageCollectBlock(dev, block);
++			gcOk = yaffs_GarbageCollectBlock(dev, block, aggressive);
+ 		}
+ 
+ 		if (dev->nErasedBlocks < (dev->nReservedBlocks) && block > 0) {
+@@ -3176,15 +3252,16 @@ static int yaffs_CheckGarbageCollection(
+ 			   ("yaffs: GC !!!no reclaim!!! erasedBlocks %d after try %d block %d"
+ 			    TENDSTR), dev->nErasedBlocks, maxTries, block));
+ 		}
+-	} while ((dev->nErasedBlocks < dev->nReservedBlocks) && (block > 0)
+-		 && (maxTries < 2));
++	} while ((dev->nErasedBlocks < dev->nReservedBlocks) &&
++		 (block > 0) &&
++		 (maxTries < 2));
+ 
+ 	return aggressive ? gcOk : YAFFS_OK;
+ }
+ 
+ /*-------------------------  TAGS --------------------------------*/
+ 
+-static int yaffs_TagsMatch(const yaffs_ExtendedTags * tags, int objectId,
++static int yaffs_TagsMatch(const yaffs_ExtendedTags *tags, int objectId,
+ 			   int chunkInObject)
+ {
+ 	return (tags->chunkId == chunkInObject &&
+@@ -3195,8 +3272,8 @@ static int yaffs_TagsMatch(const yaffs_E
+ 
+ /*-------------------- Data file manipulation -----------------*/
+ 
+-static int yaffs_FindChunkInFile(yaffs_Object * in, int chunkInInode,
+-				 yaffs_ExtendedTags * tags)
++static int yaffs_FindChunkInFile(yaffs_Object *in, int chunkInInode,
++				 yaffs_ExtendedTags *tags)
+ {
+ 	/*Get the Tnode, then get the level 0 offset chunk offset */
+ 	yaffs_Tnode *tn;
+@@ -3214,7 +3291,7 @@ static int yaffs_FindChunkInFile(yaffs_O
+ 	tn = yaffs_FindLevel0Tnode(dev, &in->variant.fileVariant, chunkInInode);
+ 
+ 	if (tn) {
+-		theChunk = yaffs_GetChunkGroupBase(dev,tn,chunkInInode);
++		theChunk = yaffs_GetChunkGroupBase(dev, tn, chunkInInode);
+ 
+ 		retVal =
+ 		    yaffs_FindChunkInGroup(dev, theChunk, tags, in->objectId,
+@@ -3223,8 +3300,8 @@ static int yaffs_FindChunkInFile(yaffs_O
+ 	return retVal;
+ }
+ 
+-static int yaffs_FindAndDeleteChunkInFile(yaffs_Object * in, int chunkInInode,
+-					  yaffs_ExtendedTags * tags)
++static int yaffs_FindAndDeleteChunkInFile(yaffs_Object *in, int chunkInInode,
++					  yaffs_ExtendedTags *tags)
+ {
+ 	/* Get the Tnode, then get the level 0 offset chunk offset */
+ 	yaffs_Tnode *tn;
+@@ -3243,29 +3320,23 @@ static int yaffs_FindAndDeleteChunkInFil
+ 
+ 	if (tn) {
+ 
+-		theChunk = yaffs_GetChunkGroupBase(dev,tn,chunkInInode);
++		theChunk = yaffs_GetChunkGroupBase(dev, tn, chunkInInode);
+ 
+ 		retVal =
+ 		    yaffs_FindChunkInGroup(dev, theChunk, tags, in->objectId,
+ 					   chunkInInode);
+ 
+ 		/* Delete the entry in the filestructure (if found) */
+-		if (retVal != -1) {
+-			yaffs_PutLevel0Tnode(dev,tn,chunkInInode,0);
+-		}
+-	} else {
+-		/*T(("No level 0 found for %d\n", chunkInInode)); */
++		if (retVal != -1)
++			yaffs_PutLevel0Tnode(dev, tn, chunkInInode, 0);
+ 	}
+ 
+-	if (retVal == -1) {
+-		/* T(("Could not find %d to delete\n",chunkInInode)); */
+-	}
+ 	return retVal;
+ }
+ 
+ #ifdef YAFFS_PARANOID
+ 
+-static int yaffs_CheckFileSanity(yaffs_Object * in)
++static int yaffs_CheckFileSanity(yaffs_Object *in)
+ {
+ 	int chunk;
+ 	int nChunks;
+@@ -3278,10 +3349,8 @@ static int yaffs_CheckFileSanity(yaffs_O
+ 	int theChunk;
+ 	int chunkDeleted;
+ 
+-	if (in->variantType != YAFFS_OBJECT_TYPE_FILE) {
+-		/* T(("Object not a file\n")); */
++	if (in->variantType != YAFFS_OBJECT_TYPE_FILE)
+ 		return YAFFS_FAIL;
+-	}
+ 
+ 	objId = in->objectId;
+ 	fSize = in->variant.fileVariant.fileSize;
+@@ -3294,7 +3363,7 @@ static int yaffs_CheckFileSanity(yaffs_O
+ 
+ 		if (tn) {
+ 
+-			theChunk = yaffs_GetChunkGroupBase(dev,tn,chunk);
++			theChunk = yaffs_GetChunkGroupBase(dev, tn, chunk);
+ 
+ 			if (yaffs_CheckChunkBits
+ 			    (dev, theChunk / dev->nChunksPerBlock,
+@@ -3323,7 +3392,7 @@ static int yaffs_CheckFileSanity(yaffs_O
+ 
+ #endif
+ 
+-static int yaffs_PutChunkIntoFile(yaffs_Object * in, int chunkInInode,
++static int yaffs_PutChunkIntoFile(yaffs_Object *in, int chunkInInode,
+ 				  int chunkInNAND, int inScan)
+ {
+ 	/* NB inScan is zero unless scanning.
+@@ -3358,11 +3427,10 @@ static int yaffs_PutChunkIntoFile(yaffs_
+ 					&in->variant.fileVariant,
+ 					chunkInInode,
+ 					NULL);
+-	if (!tn) {
++	if (!tn)
+ 		return YAFFS_FAIL;
+-	}
+ 
+-	existingChunk = yaffs_GetChunkGroupBase(dev,tn,chunkInInode);
++	existingChunk = yaffs_GetChunkGroupBase(dev, tn, chunkInInode);
+ 
+ 	if (inScan != 0) {
+ 		/* If we're scanning then we need to test for duplicates
+@@ -3374,7 +3442,7 @@ static int yaffs_PutChunkIntoFile(yaffs_
+ 		 * Update: For backward scanning we don't need to re-read tags so this is quite cheap.
+ 		 */
+ 
+-		if (existingChunk != 0) {
++		if (existingChunk > 0) {
+ 			/* NB Right now existing chunk will not be real chunkId if the device >= 32MB
+ 			 *    thus we have to do a FindChunkInFile to get the real chunk id.
+ 			 *
+@@ -3411,8 +3479,10 @@ static int yaffs_PutChunkIntoFile(yaffs_
+ 			 * not be loaded during a scan
+ 			 */
+ 
+-			newSerial = newTags.serialNumber;
+-			existingSerial = existingTags.serialNumber;
++			if (inScan > 0) {
++				newSerial = newTags.serialNumber;
++				existingSerial = existingTags.serialNumber;
++			}
+ 
+ 			if ((inScan > 0) &&
+ 			    (in->myDev->isYaffs2 ||
+@@ -3437,24 +3507,23 @@ static int yaffs_PutChunkIntoFile(yaffs_
+ 
+ 	}
+ 
+-	if (existingChunk == 0) {
++	if (existingChunk == 0)
+ 		in->nDataChunks++;
+-	}
+ 
+-	yaffs_PutLevel0Tnode(dev,tn,chunkInInode,chunkInNAND);
++	yaffs_PutLevel0Tnode(dev, tn, chunkInInode, chunkInNAND);
+ 
+ 	return YAFFS_OK;
+ }
+ 
+-static int yaffs_ReadChunkDataFromObject(yaffs_Object * in, int chunkInInode,
+-					 __u8 * buffer)
++static int yaffs_ReadChunkDataFromObject(yaffs_Object *in, int chunkInInode,
++					__u8 *buffer)
+ {
+ 	int chunkInNAND = yaffs_FindChunkInFile(in, chunkInInode, NULL);
+ 
+-	if (chunkInNAND >= 0) {
++	if (chunkInNAND >= 0)
+ 		return yaffs_ReadChunkWithTagsFromNAND(in->myDev, chunkInNAND,
+-						       buffer,NULL);
+-	} else {
++						buffer, NULL);
++	else {
+ 		T(YAFFS_TRACE_NANDACCESS,
+ 		  (TSTR("Chunk %d not found zero instead" TENDSTR),
+ 		   chunkInNAND));
+@@ -3465,7 +3534,7 @@ static int yaffs_ReadChunkDataFromObject
+ 
+ }
+ 
+-void yaffs_DeleteChunk(yaffs_Device * dev, int chunkId, int markNAND, int lyn)
++void yaffs_DeleteChunk(yaffs_Device *dev, int chunkId, int markNAND, int lyn)
+ {
+ 	int block;
+ 	int page;
+@@ -3475,16 +3544,15 @@ void yaffs_DeleteChunk(yaffs_Device * de
+ 	if (chunkId <= 0)
+ 		return;
+ 
+-
+ 	dev->nDeletions++;
+ 	block = chunkId / dev->nChunksPerBlock;
+ 	page = chunkId % dev->nChunksPerBlock;
+ 
+ 
+-	if(!yaffs_CheckChunkBit(dev,block,page))
++	if (!yaffs_CheckChunkBit(dev, block, page))
+ 		T(YAFFS_TRACE_VERIFY,
+-		 	(TSTR("Deleting invalid chunk %d"TENDSTR),
+-		 	 chunkId));
++			(TSTR("Deleting invalid chunk %d"TENDSTR),
++			 chunkId));
+ 
+ 	bi = yaffs_GetBlockInfo(dev, block);
+ 
+@@ -3524,14 +3592,12 @@ void yaffs_DeleteChunk(yaffs_Device * de
+ 			yaffs_BlockBecameDirty(dev, block);
+ 		}
+ 
+-	} else {
+-		/* T(("Bad news deleting chunk %d\n",chunkId)); */
+ 	}
+ 
+ }
+ 
+-static int yaffs_WriteChunkDataToObject(yaffs_Object * in, int chunkInInode,
+-					const __u8 * buffer, int nBytes,
++static int yaffs_WriteChunkDataToObject(yaffs_Object *in, int chunkInInode,
++					const __u8 *buffer, int nBytes,
+ 					int useReserve)
+ {
+ 	/* Find old chunk Need to do this to get serial number
+@@ -3561,6 +3627,12 @@ static int yaffs_WriteChunkDataToObject(
+ 	    (prevChunkId >= 0) ? prevTags.serialNumber + 1 : 1;
+ 	newTags.byteCount = nBytes;
+ 
++	if (nBytes < 1 || nBytes > dev->totalBytesPerChunk) {
++		T(YAFFS_TRACE_ERROR,
++		(TSTR("Writing %d bytes to chunk!!!!!!!!!" TENDSTR), nBytes));
++		YBUG();
++	}
++
+ 	newChunkId =
+ 	    yaffs_WriteNewChunkWithTagsToNAND(dev, buffer, &newTags,
+ 					      useReserve);
+@@ -3568,11 +3640,9 @@ static int yaffs_WriteChunkDataToObject(
+ 	if (newChunkId >= 0) {
+ 		yaffs_PutChunkIntoFile(in, chunkInInode, newChunkId, 0);
+ 
+-		if (prevChunkId >= 0) {
++		if (prevChunkId >= 0)
+ 			yaffs_DeleteChunk(dev, prevChunkId, 1, __LINE__);
+ 
+-		}
+-
+ 		yaffs_CheckFileSanity(in);
+ 	}
+ 	return newChunkId;
+@@ -3582,7 +3652,7 @@ static int yaffs_WriteChunkDataToObject(
+ /* UpdateObjectHeader updates the header on NAND for an object.
+  * If name is not NULL, then that new name is used.
+  */
+-int yaffs_UpdateObjectHeader(yaffs_Object * in, const YCHAR * name, int force,
++int yaffs_UpdateObjectHeader(yaffs_Object *in, const YCHAR *name, int force,
+ 			     int isShrink, int shadows)
+ {
+ 
+@@ -3603,9 +3673,12 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 
+ 	yaffs_ObjectHeader *oh = NULL;
+ 
+-	yaffs_strcpy(oldName,"silly old name");
++	yaffs_strcpy(oldName, _Y("silly old name"));
+ 
+-	if (!in->fake || force) {
++
++	if (!in->fake ||
++		in == dev->rootDir || /* The rootDir should also be saved */
++		force) {
+ 
+ 		yaffs_CheckGarbageCollection(dev);
+ 		yaffs_CheckObjectDetailsLoaded(in);
+@@ -3613,13 +3686,13 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 		buffer = yaffs_GetTempBuffer(in->myDev, __LINE__);
+ 		oh = (yaffs_ObjectHeader *) buffer;
+ 
+-		prevChunkId = in->chunkId;
++		prevChunkId = in->hdrChunk;
+ 
+-		if (prevChunkId >= 0) {
++		if (prevChunkId > 0) {
+ 			result = yaffs_ReadChunkWithTagsFromNAND(dev, prevChunkId,
+ 							buffer, &oldTags);
+ 
+-			yaffs_VerifyObjectHeader(in,oh,&oldTags,0);
++			yaffs_VerifyObjectHeader(in, oh, &oldTags, 0);
+ 
+ 			memcpy(oldName, oh->name, sizeof(oh->name));
+ 		}
+@@ -3628,7 +3701,7 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 
+ 		oh->type = in->variantType;
+ 		oh->yst_mode = in->yst_mode;
+-		oh->shadowsObject = shadows;
++		oh->shadowsObject = oh->inbandShadowsObject = shadows;
+ 
+ #ifdef CONFIG_YAFFS_WINCE
+ 		oh->win_atime[0] = in->win_atime[0];
+@@ -3645,20 +3718,18 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 		oh->yst_ctime = in->yst_ctime;
+ 		oh->yst_rdev = in->yst_rdev;
+ #endif
+-		if (in->parent) {
++		if (in->parent)
+ 			oh->parentObjectId = in->parent->objectId;
+-		} else {
++		else
+ 			oh->parentObjectId = 0;
+-		}
+ 
+ 		if (name && *name) {
+ 			memset(oh->name, 0, sizeof(oh->name));
+ 			yaffs_strncpy(oh->name, name, YAFFS_MAX_NAME_LENGTH);
+-		} else if (prevChunkId>=0) {
++		} else if (prevChunkId >= 0)
+ 			memcpy(oh->name, oldName, sizeof(oh->name));
+-		} else {
++		else
+ 			memset(oh->name, 0, sizeof(oh->name));
+-		}
+ 
+ 		oh->isShrink = isShrink;
+ 
+@@ -3708,7 +3779,7 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 		newTags.extraShadows = (oh->shadowsObject > 0) ? 1 : 0;
+ 		newTags.extraObjectType = in->variantType;
+ 
+-		yaffs_VerifyObjectHeader(in,oh,&newTags,1);
++		yaffs_VerifyObjectHeader(in, oh, &newTags, 1);
+ 
+ 		/* Create new chunk in NAND */
+ 		newChunkId =
+@@ -3717,20 +3788,20 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 
+ 		if (newChunkId >= 0) {
+ 
+-			in->chunkId = newChunkId;
++			in->hdrChunk = newChunkId;
+ 
+ 			if (prevChunkId >= 0) {
+ 				yaffs_DeleteChunk(dev, prevChunkId, 1,
+ 						  __LINE__);
+ 			}
+ 
+-			if(!yaffs_ObjectHasCachedWriteData(in))
++			if (!yaffs_ObjectHasCachedWriteData(in))
+ 				in->dirty = 0;
+ 
+ 			/* If this was a shrink, then mark the block that the chunk lives on */
+ 			if (isShrink) {
+ 				bi = yaffs_GetBlockInfo(in->myDev,
+-							newChunkId /in->myDev->	nChunksPerBlock);
++					newChunkId / in->myDev->nChunksPerBlock);
+ 				bi->hasShrinkHeader = 1;
+ 			}
+ 
+@@ -3766,7 +3837,7 @@ static int yaffs_ObjectHasCachedWriteDat
+ 	yaffs_ChunkCache *cache;
+ 	int nCaches = obj->myDev->nShortOpCaches;
+ 
+-	for(i = 0; i < nCaches; i++){
++	for (i = 0; i < nCaches; i++) {
+ 		cache = &dev->srCache[i];
+ 		if (cache->object == obj &&
+ 		    cache->dirty)
+@@ -3777,7 +3848,7 @@ static int yaffs_ObjectHasCachedWriteDat
+ }
+ 
+ 
+-static void yaffs_FlushFilesChunkCache(yaffs_Object * obj)
++static void yaffs_FlushFilesChunkCache(yaffs_Object *obj)
+ {
+ 	yaffs_Device *dev = obj->myDev;
+ 	int lowest = -99;	/* Stop compiler whining. */
+@@ -3844,16 +3915,16 @@ void yaffs_FlushEntireDeviceCache(yaffs_
+ 	 */
+ 	do {
+ 		obj = NULL;
+-		for( i = 0; i < nCaches && !obj; i++) {
++		for (i = 0; i < nCaches && !obj; i++) {
+ 			if (dev->srCache[i].object &&
+ 			    dev->srCache[i].dirty)
+ 				obj = dev->srCache[i].object;
+ 
+ 		}
+-		if(obj)
++		if (obj)
+ 			yaffs_FlushFilesChunkCache(obj);
+ 
+-	} while(obj);
++	} while (obj);
+ 
+ }
+ 
+@@ -3863,41 +3934,21 @@ void yaffs_FlushEntireDeviceCache(yaffs_
+  * Then look for the least recently used non-dirty one.
+  * Then look for the least recently used dirty one...., flush and look again.
+  */
+-static yaffs_ChunkCache *yaffs_GrabChunkCacheWorker(yaffs_Device * dev)
++static yaffs_ChunkCache *yaffs_GrabChunkCacheWorker(yaffs_Device *dev)
+ {
+ 	int i;
+-	int usage;
+-	int theOne;
+ 
+ 	if (dev->nShortOpCaches > 0) {
+ 		for (i = 0; i < dev->nShortOpCaches; i++) {
+ 			if (!dev->srCache[i].object)
+ 				return &dev->srCache[i];
+ 		}
++	}
+ 
+-		return NULL;
++	return NULL;
++}
+ 
+-		theOne = -1;
+-		usage = 0;	/* just to stop the compiler grizzling */
+-
+-		for (i = 0; i < dev->nShortOpCaches; i++) {
+-			if (!dev->srCache[i].dirty &&
+-			    ((dev->srCache[i].lastUse < usage && theOne >= 0) ||
+-			     theOne < 0)) {
+-				usage = dev->srCache[i].lastUse;
+-				theOne = i;
+-			}
+-		}
+-
+-
+-		return theOne >= 0 ? &dev->srCache[theOne] : NULL;
+-	} else {
+-		return NULL;
+-	}
+-
+-}
+-
+-static yaffs_ChunkCache *yaffs_GrabChunkCache(yaffs_Device * dev)
++static yaffs_ChunkCache *yaffs_GrabChunkCache(yaffs_Device *dev)
+ {
+ 	yaffs_ChunkCache *cache;
+ 	yaffs_Object *theObj;
+@@ -3927,8 +3978,7 @@ static yaffs_ChunkCache *yaffs_GrabChunk
+ 			for (i = 0; i < dev->nShortOpCaches; i++) {
+ 				if (dev->srCache[i].object &&
+ 				    !dev->srCache[i].locked &&
+-				    (dev->srCache[i].lastUse < usage || !cache))
+-				{
++				    (dev->srCache[i].lastUse < usage || !cache)) {
+ 					usage = dev->srCache[i].lastUse;
+ 					theObj = dev->srCache[i].object;
+ 					cache = &dev->srCache[i];
+@@ -3950,7 +4000,7 @@ static yaffs_ChunkCache *yaffs_GrabChunk
+ }
+ 
+ /* Find a cached chunk */
+-static yaffs_ChunkCache *yaffs_FindChunkCache(const yaffs_Object * obj,
++static yaffs_ChunkCache *yaffs_FindChunkCache(const yaffs_Object *obj,
+ 					      int chunkId)
+ {
+ 	yaffs_Device *dev = obj->myDev;
+@@ -3969,7 +4019,7 @@ static yaffs_ChunkCache *yaffs_FindChunk
+ }
+ 
+ /* Mark the chunk for the least recently used algorithym */
+-static void yaffs_UseChunkCache(yaffs_Device * dev, yaffs_ChunkCache * cache,
++static void yaffs_UseChunkCache(yaffs_Device *dev, yaffs_ChunkCache *cache,
+ 				int isAWrite)
+ {
+ 
+@@ -3977,9 +4027,9 @@ static void yaffs_UseChunkCache(yaffs_De
+ 		if (dev->srLastUse < 0 || dev->srLastUse > 100000000) {
+ 			/* Reset the cache usages */
+ 			int i;
+-			for (i = 1; i < dev->nShortOpCaches; i++) {
++			for (i = 1; i < dev->nShortOpCaches; i++)
+ 				dev->srCache[i].lastUse = 0;
+-			}
++
+ 			dev->srLastUse = 0;
+ 		}
+ 
+@@ -3987,9 +4037,8 @@ static void yaffs_UseChunkCache(yaffs_De
+ 
+ 		cache->lastUse = dev->srLastUse;
+ 
+-		if (isAWrite) {
++		if (isAWrite)
+ 			cache->dirty = 1;
+-		}
+ 	}
+ }
+ 
+@@ -3997,21 +4046,20 @@ static void yaffs_UseChunkCache(yaffs_De
+  * Do this when a whole page gets written,
+  * ie the short cache for this page is no longer valid.
+  */
+-static void yaffs_InvalidateChunkCache(yaffs_Object * object, int chunkId)
++static void yaffs_InvalidateChunkCache(yaffs_Object *object, int chunkId)
+ {
+ 	if (object->myDev->nShortOpCaches > 0) {
+ 		yaffs_ChunkCache *cache = yaffs_FindChunkCache(object, chunkId);
+ 
+-		if (cache) {
++		if (cache)
+ 			cache->object = NULL;
+-		}
+ 	}
+ }
+ 
+ /* Invalidate all the cache pages associated with this object
+  * Do this whenever ther file is deleted or resized.
+  */
+-static void yaffs_InvalidateWholeChunkCache(yaffs_Object * in)
++static void yaffs_InvalidateWholeChunkCache(yaffs_Object *in)
+ {
+ 	int i;
+ 	yaffs_Device *dev = in->myDev;
+@@ -4019,9 +4067,8 @@ static void yaffs_InvalidateWholeChunkCa
+ 	if (dev->nShortOpCaches > 0) {
+ 		/* Invalidate it. */
+ 		for (i = 0; i < dev->nShortOpCaches; i++) {
+-			if (dev->srCache[i].object == in) {
++			if (dev->srCache[i].object == in)
+ 				dev->srCache[i].object = NULL;
+-			}
+ 		}
+ 	}
+ }
+@@ -4029,18 +4076,18 @@ static void yaffs_InvalidateWholeChunkCa
+ /*--------------------- Checkpointing --------------------*/
+ 
+ 
+-static int yaffs_WriteCheckpointValidityMarker(yaffs_Device *dev,int head)
++static int yaffs_WriteCheckpointValidityMarker(yaffs_Device *dev, int head)
+ {
+ 	yaffs_CheckpointValidity cp;
+ 
+-	memset(&cp,0,sizeof(cp));
++	memset(&cp, 0, sizeof(cp));
+ 
+ 	cp.structType = sizeof(cp);
+ 	cp.magic = YAFFS_MAGIC;
+ 	cp.version = YAFFS_CHECKPOINT_VERSION;
+ 	cp.head = (head) ? 1 : 0;
+ 
+-	return (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp))?
++	return (yaffs_CheckpointWrite(dev, &cp, sizeof(cp)) == sizeof(cp)) ?
+ 		1 : 0;
+ }
+ 
+@@ -4049,9 +4096,9 @@ static int yaffs_ReadCheckpointValidityM
+ 	yaffs_CheckpointValidity cp;
+ 	int ok;
+ 
+-	ok = (yaffs_CheckpointRead(dev,&cp,sizeof(cp)) == sizeof(cp));
++	ok = (yaffs_CheckpointRead(dev, &cp, sizeof(cp)) == sizeof(cp));
+ 
+-	if(ok)
++	if (ok)
+ 		ok = (cp.structType == sizeof(cp)) &&
+ 		     (cp.magic == YAFFS_MAGIC) &&
+ 		     (cp.version == YAFFS_CHECKPOINT_VERSION) &&
+@@ -4100,21 +4147,21 @@ static int yaffs_WriteCheckpointDevice(y
+ 	int ok;
+ 
+ 	/* Write device runtime values*/
+-	yaffs_DeviceToCheckpointDevice(&cp,dev);
++	yaffs_DeviceToCheckpointDevice(&cp, dev);
+ 	cp.structType = sizeof(cp);
+ 
+-	ok = (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp));
++	ok = (yaffs_CheckpointWrite(dev, &cp, sizeof(cp)) == sizeof(cp));
+ 
+ 	/* Write block info */
+-	if(ok) {
++	if (ok) {
+ 		nBytes = nBlocks * sizeof(yaffs_BlockInfo);
+-		ok = (yaffs_CheckpointWrite(dev,dev->blockInfo,nBytes) == nBytes);
++		ok = (yaffs_CheckpointWrite(dev, dev->blockInfo, nBytes) == nBytes);
+ 	}
+ 
+ 	/* Write chunk bits */
+-	if(ok) {
++	if (ok) {
+ 		nBytes = nBlocks * dev->chunkBitmapStride;
+-		ok = (yaffs_CheckpointWrite(dev,dev->chunkBits,nBytes) == nBytes);
++		ok = (yaffs_CheckpointWrite(dev, dev->chunkBits, nBytes) == nBytes);
+ 	}
+ 	return	 ok ? 1 : 0;
+ 
+@@ -4128,25 +4175,25 @@ static int yaffs_ReadCheckpointDevice(ya
+ 
+ 	int ok;
+ 
+-	ok = (yaffs_CheckpointRead(dev,&cp,sizeof(cp)) == sizeof(cp));
+-	if(!ok)
++	ok = (yaffs_CheckpointRead(dev, &cp, sizeof(cp)) == sizeof(cp));
++	if (!ok)
+ 		return 0;
+ 
+-	if(cp.structType != sizeof(cp))
++	if (cp.structType != sizeof(cp))
+ 		return 0;
+ 
+ 
+-	yaffs_CheckpointDeviceToDevice(dev,&cp);
++	yaffs_CheckpointDeviceToDevice(dev, &cp);
+ 
+ 	nBytes = nBlocks * sizeof(yaffs_BlockInfo);
+ 
+-	ok = (yaffs_CheckpointRead(dev,dev->blockInfo,nBytes) == nBytes);
++	ok = (yaffs_CheckpointRead(dev, dev->blockInfo, nBytes) == nBytes);
+ 
+-	if(!ok)
++	if (!ok)
+ 		return 0;
+ 	nBytes = nBlocks * dev->chunkBitmapStride;
+ 
+-	ok = (yaffs_CheckpointRead(dev,dev->chunkBits,nBytes) == nBytes);
++	ok = (yaffs_CheckpointRead(dev, dev->chunkBits, nBytes) == nBytes);
+ 
+ 	return ok ? 1 : 0;
+ }
+@@ -4157,7 +4204,7 @@ static void yaffs_ObjectToCheckpointObje
+ 
+ 	cp->objectId = obj->objectId;
+ 	cp->parentId = (obj->parent) ? obj->parent->objectId : 0;
+-	cp->chunkId = obj->chunkId;
++	cp->hdrChunk = obj->hdrChunk;
+ 	cp->variantType = obj->variantType;
+ 	cp->deleted = obj->deleted;
+ 	cp->softDeleted = obj->softDeleted;
+@@ -4168,20 +4215,28 @@ static void yaffs_ObjectToCheckpointObje
+ 	cp->serial = obj->serial;
+ 	cp->nDataChunks = obj->nDataChunks;
+ 
+-	if(obj->variantType == YAFFS_OBJECT_TYPE_FILE)
++	if (obj->variantType == YAFFS_OBJECT_TYPE_FILE)
+ 		cp->fileSizeOrEquivalentObjectId = obj->variant.fileVariant.fileSize;
+-	else if(obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK)
++	else if (obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK)
+ 		cp->fileSizeOrEquivalentObjectId = obj->variant.hardLinkVariant.equivalentObjectId;
+ }
+ 
+-static void yaffs_CheckpointObjectToObject( yaffs_Object *obj,yaffs_CheckpointObject *cp)
++static int yaffs_CheckpointObjectToObject(yaffs_Object *obj, yaffs_CheckpointObject *cp)
+ {
+ 
+ 	yaffs_Object *parent;
+ 
++	if (obj->variantType != cp->variantType) {
++		T(YAFFS_TRACE_ERROR, (TSTR("Checkpoint read object %d type %d "
++			TCONT("chunk %d does not match existing object type %d")
++			TENDSTR), cp->objectId, cp->variantType, cp->hdrChunk,
++			obj->variantType));
++		return 0;
++	}
++
+ 	obj->objectId = cp->objectId;
+ 
+-	if(cp->parentId)
++	if (cp->parentId)
+ 		parent = yaffs_FindOrCreateObjectByNumber(
+ 					obj->myDev,
+ 					cp->parentId,
+@@ -4189,10 +4244,19 @@ static void yaffs_CheckpointObjectToObje
+ 	else
+ 		parent = NULL;
+ 
+-	if(parent)
++	if (parent) {
++		if (parent->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
++			T(YAFFS_TRACE_ALWAYS, (TSTR("Checkpoint read object %d parent %d type %d"
++				TCONT(" chunk %d Parent type, %d, not directory")
++				TENDSTR),
++				cp->objectId, cp->parentId, cp->variantType,
++				cp->hdrChunk, parent->variantType));
++			return 0;
++		}
+ 		yaffs_AddObjectToDirectory(parent, obj);
++	}
+ 
+-	obj->chunkId = cp->chunkId;
++	obj->hdrChunk = cp->hdrChunk;
+ 	obj->variantType = cp->variantType;
+ 	obj->deleted = cp->deleted;
+ 	obj->softDeleted = cp->softDeleted;
+@@ -4203,29 +4267,34 @@ static void yaffs_CheckpointObjectToObje
+ 	obj->serial = cp->serial;
+ 	obj->nDataChunks = cp->nDataChunks;
+ 
+-	if(obj->variantType == YAFFS_OBJECT_TYPE_FILE)
++	if (obj->variantType == YAFFS_OBJECT_TYPE_FILE)
+ 		obj->variant.fileVariant.fileSize = cp->fileSizeOrEquivalentObjectId;
+-	else if(obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK)
++	else if (obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK)
+ 		obj->variant.hardLinkVariant.equivalentObjectId = cp->fileSizeOrEquivalentObjectId;
+ 
+-	if(obj->objectId >= YAFFS_NOBJECT_BUCKETS)
++	if (obj->hdrChunk > 0)
+ 		obj->lazyLoaded = 1;
++	return 1;
+ }
+ 
+ 
+ 
+-static int yaffs_CheckpointTnodeWorker(yaffs_Object * in, yaffs_Tnode * tn,
+-				  	__u32 level, int chunkOffset)
++static int yaffs_CheckpointTnodeWorker(yaffs_Object *in, yaffs_Tnode *tn,
++					__u32 level, int chunkOffset)
+ {
+ 	int i;
+ 	yaffs_Device *dev = in->myDev;
+ 	int ok = 1;
+-	int nTnodeBytes = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
++	int tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
++
++	if (tnodeSize < sizeof(yaffs_Tnode))
++		tnodeSize = sizeof(yaffs_Tnode);
++
+ 
+ 	if (tn) {
+ 		if (level > 0) {
+ 
+-			for (i = 0; i < YAFFS_NTNODES_INTERNAL && ok; i++){
++			for (i = 0; i < YAFFS_NTNODES_INTERNAL && ok; i++) {
+ 				if (tn->internal[i]) {
+ 					ok = yaffs_CheckpointTnodeWorker(in,
+ 							tn->internal[i],
+@@ -4235,10 +4304,9 @@ static int yaffs_CheckpointTnodeWorker(y
+ 			}
+ 		} else if (level == 0) {
+ 			__u32 baseOffset = chunkOffset <<  YAFFS_TNODES_LEVEL0_BITS;
+-			/* printf("write tnode at %d\n",baseOffset); */
+-			ok = (yaffs_CheckpointWrite(dev,&baseOffset,sizeof(baseOffset)) == sizeof(baseOffset));
+-			if(ok)
+-				ok = (yaffs_CheckpointWrite(dev,tn,nTnodeBytes) == nTnodeBytes);
++			ok = (yaffs_CheckpointWrite(dev, &baseOffset, sizeof(baseOffset)) == sizeof(baseOffset));
++			if (ok)
++				ok = (yaffs_CheckpointWrite(dev, tn, tnodeSize) == tnodeSize);
+ 		}
+ 	}
+ 
+@@ -4251,13 +4319,13 @@ static int yaffs_WriteCheckpointTnodes(y
+ 	__u32 endMarker = ~0;
+ 	int ok = 1;
+ 
+-	if(obj->variantType == YAFFS_OBJECT_TYPE_FILE){
++	if (obj->variantType == YAFFS_OBJECT_TYPE_FILE) {
+ 		ok = yaffs_CheckpointTnodeWorker(obj,
+ 					    obj->variant.fileVariant.top,
+ 					    obj->variant.fileVariant.topLevel,
+ 					    0);
+-		if(ok)
+-			ok = (yaffs_CheckpointWrite(obj->myDev,&endMarker,sizeof(endMarker)) ==
++		if (ok)
++			ok = (yaffs_CheckpointWrite(obj->myDev, &endMarker, sizeof(endMarker)) ==
+ 				sizeof(endMarker));
+ 	}
+ 
+@@ -4272,38 +4340,38 @@ static int yaffs_ReadCheckpointTnodes(ya
+ 	yaffs_FileStructure *fileStructPtr = &obj->variant.fileVariant;
+ 	yaffs_Tnode *tn;
+ 	int nread = 0;
++	int tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
+ 
+-	ok = (yaffs_CheckpointRead(dev,&baseChunk,sizeof(baseChunk)) == sizeof(baseChunk));
++	if (tnodeSize < sizeof(yaffs_Tnode))
++		tnodeSize = sizeof(yaffs_Tnode);
+ 
+-	while(ok && (~baseChunk)){
++	ok = (yaffs_CheckpointRead(dev, &baseChunk, sizeof(baseChunk)) == sizeof(baseChunk));
++
++	while (ok && (~baseChunk)) {
+ 		nread++;
+ 		/* Read level 0 tnode */
+ 
+ 
+-		/* printf("read  tnode at %d\n",baseChunk); */
+ 		tn = yaffs_GetTnodeRaw(dev);
+-		if(tn)
+-			ok = (yaffs_CheckpointRead(dev,tn,(dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8) ==
+-			      (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8);
++		if (tn)
++			ok = (yaffs_CheckpointRead(dev, tn, tnodeSize) == tnodeSize);
+ 		else
+ 			ok = 0;
+ 
+-		if(tn && ok){
++		if (tn && ok)
+ 			ok = yaffs_AddOrFindLevel0Tnode(dev,
+-					       		fileStructPtr,
+-					       		baseChunk,
+-					       		tn) ? 1 : 0;
++							fileStructPtr,
++							baseChunk,
++							tn) ? 1 : 0;
+ 
+-		}
+-
+-		if(ok)
+-			ok = (yaffs_CheckpointRead(dev,&baseChunk,sizeof(baseChunk)) == sizeof(baseChunk));
++		if (ok)
++			ok = (yaffs_CheckpointRead(dev, &baseChunk, sizeof(baseChunk)) == sizeof(baseChunk));
+ 
+ 	}
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(
++	T(YAFFS_TRACE_CHECKPOINT, (
+ 		TSTR("Checkpoint read tnodes %d records, last %d. ok %d" TENDSTR),
+-		nread,baseChunk,ok));
++		nread, baseChunk, ok));
+ 
+ 	return ok ? 1 : 0;
+ }
+@@ -4315,41 +4383,40 @@ static int yaffs_WriteCheckpointObjects(
+ 	yaffs_CheckpointObject cp;
+ 	int i;
+ 	int ok = 1;
+-	struct list_head *lh;
++	struct ylist_head *lh;
+ 
+ 
+ 	/* Iterate through the objects in each hash entry,
+ 	 * dumping them to the checkpointing stream.
+ 	 */
+ 
+-	 for(i = 0; ok &&  i <  YAFFS_NOBJECT_BUCKETS; i++){
+-	 	list_for_each(lh, &dev->objectBucket[i].list) {
++	for (i = 0; ok &&  i <  YAFFS_NOBJECT_BUCKETS; i++) {
++		ylist_for_each(lh, &dev->objectBucket[i].list) {
+ 			if (lh) {
+-				obj = list_entry(lh, yaffs_Object, hashLink);
++				obj = ylist_entry(lh, yaffs_Object, hashLink);
+ 				if (!obj->deferedFree) {
+-					yaffs_ObjectToCheckpointObject(&cp,obj);
++					yaffs_ObjectToCheckpointObject(&cp, obj);
+ 					cp.structType = sizeof(cp);
+ 
+-					T(YAFFS_TRACE_CHECKPOINT,(
++					T(YAFFS_TRACE_CHECKPOINT, (
+ 						TSTR("Checkpoint write object %d parent %d type %d chunk %d obj addr %x" TENDSTR),
+-						cp.objectId,cp.parentId,cp.variantType,cp.chunkId,(unsigned) obj));
++						cp.objectId, cp.parentId, cp.variantType, cp.hdrChunk, (unsigned) obj));
+ 
+-					ok = (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp));
++					ok = (yaffs_CheckpointWrite(dev, &cp, sizeof(cp)) == sizeof(cp));
+ 
+-					if(ok && obj->variantType == YAFFS_OBJECT_TYPE_FILE){
++					if (ok && obj->variantType == YAFFS_OBJECT_TYPE_FILE)
+ 						ok = yaffs_WriteCheckpointTnodes(obj);
+-					}
+ 				}
+ 			}
+ 		}
+-	 }
++	}
+ 
+-	 /* Dump end of list */
+-	memset(&cp,0xFF,sizeof(yaffs_CheckpointObject));
++	/* Dump end of list */
++	memset(&cp, 0xFF, sizeof(yaffs_CheckpointObject));
+ 	cp.structType = sizeof(cp);
+ 
+-	if(ok)
+-		ok = (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp));
++	if (ok)
++		ok = (yaffs_CheckpointWrite(dev, &cp, sizeof(cp)) == sizeof(cp));
+ 
+ 	return ok ? 1 : 0;
+ }
+@@ -4362,38 +4429,39 @@ static int yaffs_ReadCheckpointObjects(y
+ 	int done = 0;
+ 	yaffs_Object *hardList = NULL;
+ 
+-	while(ok && !done) {
+-		ok = (yaffs_CheckpointRead(dev,&cp,sizeof(cp)) == sizeof(cp));
+-		if(cp.structType != sizeof(cp)) {
+-			T(YAFFS_TRACE_CHECKPOINT,(TSTR("struct size %d instead of %d ok %d"TENDSTR),
+-				cp.structType,sizeof(cp),ok));
++	while (ok && !done) {
++		ok = (yaffs_CheckpointRead(dev, &cp, sizeof(cp)) == sizeof(cp));
++		if (cp.structType != sizeof(cp)) {
++			T(YAFFS_TRACE_CHECKPOINT, (TSTR("struct size %d instead of %d ok %d"TENDSTR),
++				cp.structType, sizeof(cp), ok));
+ 			ok = 0;
+ 		}
+ 
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("Checkpoint read object %d parent %d type %d chunk %d " TENDSTR),
+-			cp.objectId,cp.parentId,cp.variantType,cp.chunkId));
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("Checkpoint read object %d parent %d type %d chunk %d " TENDSTR),
++			cp.objectId, cp.parentId, cp.variantType, cp.hdrChunk));
+ 
+-		if(ok && cp.objectId == ~0)
++		if (ok && cp.objectId == ~0)
+ 			done = 1;
+-		else if(ok){
+-			obj = yaffs_FindOrCreateObjectByNumber(dev,cp.objectId, cp.variantType);
+-			if(obj) {
+-				yaffs_CheckpointObjectToObject(obj,&cp);
+-				if(obj->variantType == YAFFS_OBJECT_TYPE_FILE) {
++		else if (ok) {
++			obj = yaffs_FindOrCreateObjectByNumber(dev, cp.objectId, cp.variantType);
++			if (obj) {
++				ok = yaffs_CheckpointObjectToObject(obj, &cp);
++				if (!ok)
++					break;
++				if (obj->variantType == YAFFS_OBJECT_TYPE_FILE) {
+ 					ok = yaffs_ReadCheckpointTnodes(obj);
+-				} else if(obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) {
++				} else if (obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) {
+ 					obj->hardLinks.next =
+-						    (struct list_head *)
+-						    hardList;
++						(struct ylist_head *) hardList;
+ 					hardList = obj;
+ 				}
+-
+-			}
++			} else
++				ok = 0;
+ 		}
+ 	}
+ 
+-	if(ok)
+-		yaffs_HardlinkFixup(dev,hardList);
++	if (ok)
++		yaffs_HardlinkFixup(dev, hardList);
+ 
+ 	return ok ? 1 : 0;
+ }
+@@ -4403,11 +4471,11 @@ static int yaffs_WriteCheckpointSum(yaff
+ 	__u32 checkpointSum;
+ 	int ok;
+ 
+-	yaffs_GetCheckpointSum(dev,&checkpointSum);
++	yaffs_GetCheckpointSum(dev, &checkpointSum);
+ 
+-	ok = (yaffs_CheckpointWrite(dev,&checkpointSum,sizeof(checkpointSum)) == sizeof(checkpointSum));
++	ok = (yaffs_CheckpointWrite(dev, &checkpointSum, sizeof(checkpointSum)) == sizeof(checkpointSum));
+ 
+-	if(!ok)
++	if (!ok)
+ 		return 0;
+ 
+ 	return 1;
+@@ -4419,14 +4487,14 @@ static int yaffs_ReadCheckpointSum(yaffs
+ 	__u32 checkpointSum1;
+ 	int ok;
+ 
+-	yaffs_GetCheckpointSum(dev,&checkpointSum0);
++	yaffs_GetCheckpointSum(dev, &checkpointSum0);
+ 
+-	ok = (yaffs_CheckpointRead(dev,&checkpointSum1,sizeof(checkpointSum1)) == sizeof(checkpointSum1));
++	ok = (yaffs_CheckpointRead(dev, &checkpointSum1, sizeof(checkpointSum1)) == sizeof(checkpointSum1));
+ 
+-	if(!ok)
++	if (!ok)
+ 		return 0;
+ 
+-	if(checkpointSum0 != checkpointSum1)
++	if (checkpointSum0 != checkpointSum1)
+ 		return 0;
+ 
+ 	return 1;
+@@ -4435,46 +4503,43 @@ static int yaffs_ReadCheckpointSum(yaffs
+ 
+ static int yaffs_WriteCheckpointData(yaffs_Device *dev)
+ {
+-
+ 	int ok = 1;
+ 
+-	if(dev->skipCheckpointWrite || !dev->isYaffs2){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("skipping checkpoint write" TENDSTR)));
++	if (dev->skipCheckpointWrite || !dev->isYaffs2) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("skipping checkpoint write" TENDSTR)));
+ 		ok = 0;
+ 	}
+ 
+-	if(ok)
+-		ok = yaffs_CheckpointOpen(dev,1);
++	if (ok)
++		ok = yaffs_CheckpointOpen(dev, 1);
+ 
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint validity" TENDSTR)));
+-		ok = yaffs_WriteCheckpointValidityMarker(dev,1);
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("write checkpoint validity" TENDSTR)));
++		ok = yaffs_WriteCheckpointValidityMarker(dev, 1);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint device" TENDSTR)));
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("write checkpoint device" TENDSTR)));
+ 		ok = yaffs_WriteCheckpointDevice(dev);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint objects" TENDSTR)));
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("write checkpoint objects" TENDSTR)));
+ 		ok = yaffs_WriteCheckpointObjects(dev);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint validity" TENDSTR)));
+-		ok = yaffs_WriteCheckpointValidityMarker(dev,0);
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("write checkpoint validity" TENDSTR)));
++		ok = yaffs_WriteCheckpointValidityMarker(dev, 0);
+ 	}
+ 
+-	if(ok){
++	if (ok)
+ 		ok = yaffs_WriteCheckpointSum(dev);
+-	}
+-
+ 
+-	if(!yaffs_CheckpointClose(dev))
+-		 ok = 0;
++	if (!yaffs_CheckpointClose(dev))
++		ok = 0;
+ 
+-	if(ok)
+-	    	dev->isCheckpointed = 1;
+-	 else
+-	 	dev->isCheckpointed = 0;
++	if (ok)
++		dev->isCheckpointed = 1;
++	else
++		dev->isCheckpointed = 0;
+ 
+ 	return dev->isCheckpointed;
+ }
+@@ -4483,43 +4548,43 @@ static int yaffs_ReadCheckpointData(yaff
+ {
+ 	int ok = 1;
+ 
+-	if(dev->skipCheckpointRead || !dev->isYaffs2){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("skipping checkpoint read" TENDSTR)));
++	if (dev->skipCheckpointRead || !dev->isYaffs2) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("skipping checkpoint read" TENDSTR)));
+ 		ok = 0;
+ 	}
+ 
+-	if(ok)
+-		ok = yaffs_CheckpointOpen(dev,0); /* open for read */
++	if (ok)
++		ok = yaffs_CheckpointOpen(dev, 0); /* open for read */
+ 
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint validity" TENDSTR)));
+-		ok = yaffs_ReadCheckpointValidityMarker(dev,1);
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("read checkpoint validity" TENDSTR)));
++		ok = yaffs_ReadCheckpointValidityMarker(dev, 1);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint device" TENDSTR)));
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("read checkpoint device" TENDSTR)));
+ 		ok = yaffs_ReadCheckpointDevice(dev);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint objects" TENDSTR)));
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("read checkpoint objects" TENDSTR)));
+ 		ok = yaffs_ReadCheckpointObjects(dev);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint validity" TENDSTR)));
+-		ok = yaffs_ReadCheckpointValidityMarker(dev,0);
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("read checkpoint validity" TENDSTR)));
++		ok = yaffs_ReadCheckpointValidityMarker(dev, 0);
+ 	}
+ 
+-	if(ok){
++	if (ok) {
+ 		ok = yaffs_ReadCheckpointSum(dev);
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint checksum %d" TENDSTR),ok));
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("read checkpoint checksum %d" TENDSTR), ok));
+ 	}
+ 
+-	if(!yaffs_CheckpointClose(dev))
++	if (!yaffs_CheckpointClose(dev))
+ 		ok = 0;
+ 
+-	if(ok)
+-	    	dev->isCheckpointed = 1;
+-	 else
+-	 	dev->isCheckpointed = 0;
++	if (ok)
++		dev->isCheckpointed = 1;
++	else
++		dev->isCheckpointed = 0;
+ 
+ 	return ok ? 1 : 0;
+ 
+@@ -4527,11 +4592,11 @@ static int yaffs_ReadCheckpointData(yaff
+ 
+ static void yaffs_InvalidateCheckpoint(yaffs_Device *dev)
+ {
+-	if(dev->isCheckpointed ||
+-	   dev->blocksInCheckpoint > 0){
++	if (dev->isCheckpointed ||
++			dev->blocksInCheckpoint > 0) {
+ 		dev->isCheckpointed = 0;
+ 		yaffs_CheckpointInvalidateStream(dev);
+-		if(dev->superBlock && dev->markSuperBlockDirty)
++		if (dev->superBlock && dev->markSuperBlockDirty)
+ 			dev->markSuperBlockDirty(dev->superBlock);
+ 	}
+ }
+@@ -4540,18 +4605,18 @@ static void yaffs_InvalidateCheckpoint(y
+ int yaffs_CheckpointSave(yaffs_Device *dev)
+ {
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("save entry: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("save entry: isCheckpointed %d"TENDSTR), dev->isCheckpointed));
+ 
+ 	yaffs_VerifyObjects(dev);
+ 	yaffs_VerifyBlocks(dev);
+ 	yaffs_VerifyFreeChunks(dev);
+ 
+-	if(!dev->isCheckpointed) {
++	if (!dev->isCheckpointed) {
+ 		yaffs_InvalidateCheckpoint(dev);
+ 		yaffs_WriteCheckpointData(dev);
+ 	}
+ 
+-	T(YAFFS_TRACE_ALWAYS,(TSTR("save exit: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
++	T(YAFFS_TRACE_ALWAYS, (TSTR("save exit: isCheckpointed %d"TENDSTR), dev->isCheckpointed));
+ 
+ 	return dev->isCheckpointed;
+ }
+@@ -4559,17 +4624,17 @@ int yaffs_CheckpointSave(yaffs_Device *d
+ int yaffs_CheckpointRestore(yaffs_Device *dev)
+ {
+ 	int retval;
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("restore entry: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("restore entry: isCheckpointed %d"TENDSTR), dev->isCheckpointed));
+ 
+ 	retval = yaffs_ReadCheckpointData(dev);
+ 
+-	if(dev->isCheckpointed){
++	if (dev->isCheckpointed) {
+ 		yaffs_VerifyObjects(dev);
+ 		yaffs_VerifyBlocks(dev);
+ 		yaffs_VerifyFreeChunks(dev);
+ 	}
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("restore exit: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("restore exit: isCheckpointed %d"TENDSTR), dev->isCheckpointed));
+ 
+ 	return retval;
+ }
+@@ -4584,12 +4649,12 @@ int yaffs_CheckpointRestore(yaffs_Device
+  * Curve-balls: the first chunk might also be the last chunk.
+  */
+ 
+-int yaffs_ReadDataFromFile(yaffs_Object * in, __u8 * buffer, loff_t offset,
+-			   int nBytes)
++int yaffs_ReadDataFromFile(yaffs_Object *in, __u8 *buffer, loff_t offset,
++			int nBytes)
+ {
+ 
+ 	int chunk;
+-	int start;
++	__u32 start;
+ 	int nToCopy;
+ 	int n = nBytes;
+ 	int nDone = 0;
+@@ -4600,27 +4665,26 @@ int yaffs_ReadDataFromFile(yaffs_Object
+ 	dev = in->myDev;
+ 
+ 	while (n > 0) {
+-		//chunk = offset / dev->nDataBytesPerChunk + 1;
+-		//start = offset % dev->nDataBytesPerChunk;
+-		yaffs_AddrToChunk(dev,offset,&chunk,&start);
++		/* chunk = offset / dev->nDataBytesPerChunk + 1; */
++		/* start = offset % dev->nDataBytesPerChunk; */
++		yaffs_AddrToChunk(dev, offset, &chunk, &start);
+ 		chunk++;
+ 
+ 		/* OK now check for the curveball where the start and end are in
+ 		 * the same chunk.
+ 		 */
+-		if ((start + n) < dev->nDataBytesPerChunk) {
++		if ((start + n) < dev->nDataBytesPerChunk)
+ 			nToCopy = n;
+-		} else {
++		else
+ 			nToCopy = dev->nDataBytesPerChunk - start;
+-		}
+ 
+ 		cache = yaffs_FindChunkCache(in, chunk);
+ 
+ 		/* If the chunk is already in the cache or it is less than a whole chunk
+-		 * then use the cache (if there is caching)
++		 * or we're using inband tags then use the cache (if there is caching)
+ 		 * else bypass the cache.
+ 		 */
+-		if (cache || nToCopy != dev->nDataBytesPerChunk) {
++		if (cache || nToCopy != dev->nDataBytesPerChunk || dev->inbandTags) {
+ 			if (dev->nShortOpCaches > 0) {
+ 
+ 				/* If we can't find the data in the cache, then load it up. */
+@@ -4641,14 +4705,9 @@ int yaffs_ReadDataFromFile(yaffs_Object
+ 
+ 				cache->locked = 1;
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_UnlockYAFFS(TRUE);
+-#endif
++
+ 				memcpy(buffer, &cache->data[start], nToCopy);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_LockYAFFS(TRUE);
+-#endif
+ 				cache->locked = 0;
+ 			} else {
+ 				/* Read into the local buffer then copy..*/
+@@ -4657,41 +4716,19 @@ int yaffs_ReadDataFromFile(yaffs_Object
+ 				    yaffs_GetTempBuffer(dev, __LINE__);
+ 				yaffs_ReadChunkDataFromObject(in, chunk,
+ 							      localBuffer);
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_UnlockYAFFS(TRUE);
+-#endif
++
+ 				memcpy(buffer, &localBuffer[start], nToCopy);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_LockYAFFS(TRUE);
+-#endif
++
+ 				yaffs_ReleaseTempBuffer(dev, localBuffer,
+ 							__LINE__);
+ 			}
+ 
+ 		} else {
+-#ifdef CONFIG_YAFFS_WINCE
+-			__u8 *localBuffer = yaffs_GetTempBuffer(dev, __LINE__);
+-
+-			/* Under WinCE can't do direct transfer. Need to use a local buffer.
+-			 * This is because we otherwise screw up WinCE's memory mapper
+-			 */
+-			yaffs_ReadChunkDataFromObject(in, chunk, localBuffer);
+-
+-#ifdef CONFIG_YAFFS_WINCE
+-			yfsd_UnlockYAFFS(TRUE);
+-#endif
+-			memcpy(buffer, localBuffer, dev->nDataBytesPerChunk);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-			yfsd_LockYAFFS(TRUE);
+-			yaffs_ReleaseTempBuffer(dev, localBuffer, __LINE__);
+-#endif
+-
+-#else
+ 			/* A full chunk. Read directly into the supplied buffer. */
+ 			yaffs_ReadChunkDataFromObject(in, chunk, buffer);
+-#endif
++
+ 		}
+ 
+ 		n -= nToCopy;
+@@ -4704,28 +4741,37 @@ int yaffs_ReadDataFromFile(yaffs_Object
+ 	return nDone;
+ }
+ 
+-int yaffs_WriteDataToFile(yaffs_Object * in, const __u8 * buffer, loff_t offset,
+-			  int nBytes, int writeThrough)
++int yaffs_WriteDataToFile(yaffs_Object *in, const __u8 *buffer, loff_t offset,
++			int nBytes, int writeThrough)
+ {
+ 
+ 	int chunk;
+-	int start;
++	__u32 start;
+ 	int nToCopy;
+ 	int n = nBytes;
+ 	int nDone = 0;
+ 	int nToWriteBack;
+ 	int startOfWrite = offset;
+ 	int chunkWritten = 0;
+-	int nBytesRead;
++	__u32 nBytesRead;
++	__u32 chunkStart;
+ 
+ 	yaffs_Device *dev;
+ 
+ 	dev = in->myDev;
+ 
+ 	while (n > 0 && chunkWritten >= 0) {
+-		//chunk = offset / dev->nDataBytesPerChunk + 1;
+-		//start = offset % dev->nDataBytesPerChunk;
+-		yaffs_AddrToChunk(dev,offset,&chunk,&start);
++		/* chunk = offset / dev->nDataBytesPerChunk + 1; */
++		/* start = offset % dev->nDataBytesPerChunk; */
++		yaffs_AddrToChunk(dev, offset, &chunk, &start);
++
++		if (chunk * dev->nDataBytesPerChunk + start != offset ||
++				start >= dev->nDataBytesPerChunk) {
++			T(YAFFS_TRACE_ERROR, (
++			   TSTR("AddrToChunk of offset %d gives chunk %d start %d"
++			   TENDSTR),
++			   (int)offset, chunk, start));
++		}
+ 		chunk++;
+ 
+ 		/* OK now check for the curveball where the start and end are in
+@@ -4740,25 +4786,32 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 			 * we need to write back as much as was there before.
+ 			 */
+ 
+-			nBytesRead =
+-			    in->variant.fileVariant.fileSize -
+-			    ((chunk - 1) * dev->nDataBytesPerChunk);
++			chunkStart = ((chunk - 1) * dev->nDataBytesPerChunk);
++
++			if (chunkStart > in->variant.fileVariant.fileSize)
++				nBytesRead = 0; /* Past end of file */
++			else
++				nBytesRead = in->variant.fileVariant.fileSize - chunkStart;
+ 
+-			if (nBytesRead > dev->nDataBytesPerChunk) {
++			if (nBytesRead > dev->nDataBytesPerChunk)
+ 				nBytesRead = dev->nDataBytesPerChunk;
+-			}
+ 
+ 			nToWriteBack =
+ 			    (nBytesRead >
+ 			     (start + n)) ? nBytesRead : (start + n);
+ 
++			if (nToWriteBack < 0 || nToWriteBack > dev->nDataBytesPerChunk)
++				YBUG();
++
+ 		} else {
+ 			nToCopy = dev->nDataBytesPerChunk - start;
+ 			nToWriteBack = dev->nDataBytesPerChunk;
+ 		}
+ 
+-		if (nToCopy != dev->nDataBytesPerChunk) {
+-			/* An incomplete start or end chunk (or maybe both start and end chunk) */
++		if (nToCopy != dev->nDataBytesPerChunk || dev->inbandTags) {
++			/* An incomplete start or end chunk (or maybe both start and end chunk),
++			 * or we're using inband tags, so we want to use the cache buffers.
++			 */
+ 			if (dev->nShortOpCaches > 0) {
+ 				yaffs_ChunkCache *cache;
+ 				/* If we can't find the data in the cache, then load the cache */
+@@ -4775,10 +4828,9 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 					yaffs_ReadChunkDataFromObject(in, chunk,
+ 								      cache->
+ 								      data);
+-				}
+-				else if(cache &&
+-				        !cache->dirty &&
+-					!yaffs_CheckSpaceForAllocation(in->myDev)){
++				} else if (cache &&
++					!cache->dirty &&
++					!yaffs_CheckSpaceForAllocation(in->myDev)) {
+ 					/* Drop the cache if it was a read cache item and
+ 					 * no space check has been made for it.
+ 					 */
+@@ -4788,16 +4840,12 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 				if (cache) {
+ 					yaffs_UseChunkCache(dev, cache, 1);
+ 					cache->locked = 1;
+-#ifdef CONFIG_YAFFS_WINCE
+-					yfsd_UnlockYAFFS(TRUE);
+-#endif
++
+ 
+ 					memcpy(&cache->data[start], buffer,
+ 					       nToCopy);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-					yfsd_LockYAFFS(TRUE);
+-#endif
++
+ 					cache->locked = 0;
+ 					cache->nBytes = nToWriteBack;
+ 
+@@ -4825,15 +4873,10 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 				yaffs_ReadChunkDataFromObject(in, chunk,
+ 							      localBuffer);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_UnlockYAFFS(TRUE);
+-#endif
++
+ 
+ 				memcpy(&localBuffer[start], buffer, nToCopy);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_LockYAFFS(TRUE);
+-#endif
+ 				chunkWritten =
+ 				    yaffs_WriteChunkDataToObject(in, chunk,
+ 								 localBuffer,
+@@ -4846,31 +4889,15 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 			}
+ 
+ 		} else {
+-
+-#ifdef CONFIG_YAFFS_WINCE
+-			/* Under WinCE can't do direct transfer. Need to use a local buffer.
+-			 * This is because we otherwise screw up WinCE's memory mapper
+-			 */
+-			__u8 *localBuffer = yaffs_GetTempBuffer(dev, __LINE__);
+-#ifdef CONFIG_YAFFS_WINCE
+-			yfsd_UnlockYAFFS(TRUE);
+-#endif
+-			memcpy(localBuffer, buffer, dev->nDataBytesPerChunk);
+-#ifdef CONFIG_YAFFS_WINCE
+-			yfsd_LockYAFFS(TRUE);
+-#endif
+-			chunkWritten =
+-			    yaffs_WriteChunkDataToObject(in, chunk, localBuffer,
+-							 dev->nDataBytesPerChunk,
+-							 0);
+-			yaffs_ReleaseTempBuffer(dev, localBuffer, __LINE__);
+-#else
+ 			/* A full chunk. Write directly from the supplied buffer. */
++
++
++
+ 			chunkWritten =
+ 			    yaffs_WriteChunkDataToObject(in, chunk, buffer,
+ 							 dev->nDataBytesPerChunk,
+ 							 0);
+-#endif
++
+ 			/* Since we've overwritten the cached data, we better invalidate it. */
+ 			yaffs_InvalidateChunkCache(in, chunk);
+ 		}
+@@ -4886,9 +4913,8 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 
+ 	/* Update file object */
+ 
+-	if ((startOfWrite + nDone) > in->variant.fileVariant.fileSize) {
++	if ((startOfWrite + nDone) > in->variant.fileVariant.fileSize)
+ 		in->variant.fileVariant.fileSize = (startOfWrite + nDone);
+-	}
+ 
+ 	in->dirty = 1;
+ 
+@@ -4898,7 +4924,7 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 
+ /* ---------------------- File resizing stuff ------------------ */
+ 
+-static void yaffs_PruneResizedChunks(yaffs_Object * in, int newSize)
++static void yaffs_PruneResizedChunks(yaffs_Object *in, int newSize)
+ {
+ 
+ 	yaffs_Device *dev = in->myDev;
+@@ -4939,11 +4965,11 @@ static void yaffs_PruneResizedChunks(yaf
+ 
+ }
+ 
+-int yaffs_ResizeFile(yaffs_Object * in, loff_t newSize)
++int yaffs_ResizeFile(yaffs_Object *in, loff_t newSize)
+ {
+ 
+ 	int oldFileSize = in->variant.fileVariant.fileSize;
+-	int newSizeOfPartialChunk;
++	__u32 newSizeOfPartialChunk;
+ 	int newFullChunks;
+ 
+ 	yaffs_Device *dev = in->myDev;
+@@ -4955,13 +4981,11 @@ int yaffs_ResizeFile(yaffs_Object * in,
+ 
+ 	yaffs_CheckGarbageCollection(dev);
+ 
+-	if (in->variantType != YAFFS_OBJECT_TYPE_FILE) {
+-		return yaffs_GetFileSize(in);
+-	}
++	if (in->variantType != YAFFS_OBJECT_TYPE_FILE)
++		return YAFFS_FAIL;
+ 
+-	if (newSize == oldFileSize) {
+-		return oldFileSize;
+-	}
++	if (newSize == oldFileSize)
++		return YAFFS_OK;
+ 
+ 	if (newSize < oldFileSize) {
+ 
+@@ -4994,21 +5018,20 @@ int yaffs_ResizeFile(yaffs_Object * in,
+ 	}
+ 
+ 
+-
+ 	/* Write a new object header.
+ 	 * show we've shrunk the file, if need be
+ 	 * Do this only if the file is not in the deleted directories.
+ 	 */
+-	if (in->parent->objectId != YAFFS_OBJECTID_UNLINKED &&
+-	    in->parent->objectId != YAFFS_OBJECTID_DELETED) {
++	if (in->parent &&
++	    in->parent->objectId != YAFFS_OBJECTID_UNLINKED &&
++	    in->parent->objectId != YAFFS_OBJECTID_DELETED)
+ 		yaffs_UpdateObjectHeader(in, NULL, 0,
+ 					 (newSize < oldFileSize) ? 1 : 0, 0);
+-	}
+ 
+-	return newSize;
++	return YAFFS_OK;
+ }
+ 
+-loff_t yaffs_GetFileSize(yaffs_Object * obj)
++loff_t yaffs_GetFileSize(yaffs_Object *obj)
+ {
+ 	obj = yaffs_GetEquivalentObject(obj);
+ 
+@@ -5024,7 +5047,7 @@ loff_t yaffs_GetFileSize(yaffs_Object *
+ 
+ 
+ 
+-int yaffs_FlushFile(yaffs_Object * in, int updateTime)
++int yaffs_FlushFile(yaffs_Object *in, int updateTime)
+ {
+ 	int retVal;
+ 	if (in->dirty) {
+@@ -5039,9 +5062,8 @@ int yaffs_FlushFile(yaffs_Object * in, i
+ #endif
+ 		}
+ 
+-		retVal =
+-		    (yaffs_UpdateObjectHeader(in, NULL, 0, 0, 0) >=
+-		     0) ? YAFFS_OK : YAFFS_FAIL;
++		retVal = (yaffs_UpdateObjectHeader(in, NULL, 0, 0, 0) >=
++			0) ? YAFFS_OK : YAFFS_FAIL;
+ 	} else {
+ 		retVal = YAFFS_OK;
+ 	}
+@@ -5050,7 +5072,7 @@ int yaffs_FlushFile(yaffs_Object * in, i
+ 
+ }
+ 
+-static int yaffs_DoGenericObjectDeletion(yaffs_Object * in)
++static int yaffs_DoGenericObjectDeletion(yaffs_Object *in)
+ {
+ 
+ 	/* First off, invalidate the file's data in the cache, without flushing. */
+@@ -5058,13 +5080,13 @@ static int yaffs_DoGenericObjectDeletion
+ 
+ 	if (in->myDev->isYaffs2 && (in->parent != in->myDev->deletedDir)) {
+ 		/* Move to the unlinked directory so we have a record that it was deleted. */
+-		yaffs_ChangeObjectName(in, in->myDev->deletedDir,"deleted", 0, 0);
++		yaffs_ChangeObjectName(in, in->myDev->deletedDir, _Y("deleted"), 0, 0);
+ 
+ 	}
+ 
+ 	yaffs_RemoveObjectFromDirectory(in);
+-	yaffs_DeleteChunk(in->myDev, in->chunkId, 1, __LINE__);
+-	in->chunkId = -1;
++	yaffs_DeleteChunk(in->myDev, in->hdrChunk, 1, __LINE__);
++	in->hdrChunk = 0;
+ 
+ 	yaffs_FreeObject(in);
+ 	return YAFFS_OK;
+@@ -5075,62 +5097,63 @@ static int yaffs_DoGenericObjectDeletion
+  * and the inode associated with the file.
+  * It does not delete the links associated with the file.
+  */
+-static int yaffs_UnlinkFile(yaffs_Object * in)
++static int yaffs_UnlinkFileIfNeeded(yaffs_Object *in)
+ {
+ 
+ 	int retVal;
+ 	int immediateDeletion = 0;
+ 
+-	if (1) {
+ #ifdef __KERNEL__
+-		if (!in->myInode) {
+-			immediateDeletion = 1;
+-
+-		}
++	if (!in->myInode)
++		immediateDeletion = 1;
+ #else
+-		if (in->inUse <= 0) {
+-			immediateDeletion = 1;
+-
+-		}
++	if (in->inUse <= 0)
++		immediateDeletion = 1;
+ #endif
+-		if (immediateDeletion) {
+-			retVal =
+-			    yaffs_ChangeObjectName(in, in->myDev->deletedDir,
+-						   "deleted", 0, 0);
+-			T(YAFFS_TRACE_TRACING,
+-			  (TSTR("yaffs: immediate deletion of file %d" TENDSTR),
+-			   in->objectId));
+-			in->deleted = 1;
+-			in->myDev->nDeletedFiles++;
+-			if (0 && in->myDev->isYaffs2) {
+-				yaffs_ResizeFile(in, 0);
+-			}
+-			yaffs_SoftDeleteFile(in);
+-		} else {
+-			retVal =
+-			    yaffs_ChangeObjectName(in, in->myDev->unlinkedDir,
+-						   "unlinked", 0, 0);
+-		}
+ 
++	if (immediateDeletion) {
++		retVal =
++		    yaffs_ChangeObjectName(in, in->myDev->deletedDir,
++					   _Y("deleted"), 0, 0);
++		T(YAFFS_TRACE_TRACING,
++		  (TSTR("yaffs: immediate deletion of file %d" TENDSTR),
++		   in->objectId));
++		in->deleted = 1;
++		in->myDev->nDeletedFiles++;
++		if (1 || in->myDev->isYaffs2)
++			yaffs_ResizeFile(in, 0);
++		yaffs_SoftDeleteFile(in);
++	} else {
++		retVal =
++		    yaffs_ChangeObjectName(in, in->myDev->unlinkedDir,
++					   _Y("unlinked"), 0, 0);
+ 	}
++
++
+ 	return retVal;
+ }
+ 
+-int yaffs_DeleteFile(yaffs_Object * in)
++int yaffs_DeleteFile(yaffs_Object *in)
+ {
+ 	int retVal = YAFFS_OK;
++	int deleted = in->deleted;
++
++	yaffs_ResizeFile(in, 0);
+ 
+ 	if (in->nDataChunks > 0) {
+-		/* Use soft deletion if there is data in the file */
+-		if (!in->unlinked) {
+-			retVal = yaffs_UnlinkFile(in);
+-		}
++		/* Use soft deletion if there is data in the file.
++		 * That won't be the case if it has been resized to zero.
++		 */
++		if (!in->unlinked)
++			retVal = yaffs_UnlinkFileIfNeeded(in);
++
+ 		if (retVal == YAFFS_OK && in->unlinked && !in->deleted) {
+ 			in->deleted = 1;
++			deleted = 1;
+ 			in->myDev->nDeletedFiles++;
+ 			yaffs_SoftDeleteFile(in);
+ 		}
+-		return in->deleted ? YAFFS_OK : YAFFS_FAIL;
++		return deleted ? YAFFS_OK : YAFFS_FAIL;
+ 	} else {
+ 		/* The file has no data chunks so we toss it immediately */
+ 		yaffs_FreeTnode(in->myDev, in->variant.fileVariant.top);
+@@ -5141,62 +5164,75 @@ int yaffs_DeleteFile(yaffs_Object * in)
+ 	}
+ }
+ 
+-static int yaffs_DeleteDirectory(yaffs_Object * in)
++static int yaffs_DeleteDirectory(yaffs_Object *in)
+ {
+ 	/* First check that the directory is empty. */
+-	if (list_empty(&in->variant.directoryVariant.children)) {
++	if (ylist_empty(&in->variant.directoryVariant.children))
+ 		return yaffs_DoGenericObjectDeletion(in);
+-	}
+ 
+ 	return YAFFS_FAIL;
+ 
+ }
+ 
+-static int yaffs_DeleteSymLink(yaffs_Object * in)
++static int yaffs_DeleteSymLink(yaffs_Object *in)
+ {
+ 	YFREE(in->variant.symLinkVariant.alias);
+ 
+ 	return yaffs_DoGenericObjectDeletion(in);
+ }
+ 
+-static int yaffs_DeleteHardLink(yaffs_Object * in)
++static int yaffs_DeleteHardLink(yaffs_Object *in)
+ {
+ 	/* remove this hardlink from the list assocaited with the equivalent
+ 	 * object
+ 	 */
+-	list_del(&in->hardLinks);
++	ylist_del_init(&in->hardLinks);
+ 	return yaffs_DoGenericObjectDeletion(in);
+ }
+ 
+-static void yaffs_DestroyObject(yaffs_Object * obj)
++int yaffs_DeleteObject(yaffs_Object *obj)
+ {
++int retVal = -1;
+ 	switch (obj->variantType) {
+ 	case YAFFS_OBJECT_TYPE_FILE:
+-		yaffs_DeleteFile(obj);
++		retVal = yaffs_DeleteFile(obj);
+ 		break;
+ 	case YAFFS_OBJECT_TYPE_DIRECTORY:
+-		yaffs_DeleteDirectory(obj);
++		return yaffs_DeleteDirectory(obj);
+ 		break;
+ 	case YAFFS_OBJECT_TYPE_SYMLINK:
+-		yaffs_DeleteSymLink(obj);
++		retVal = yaffs_DeleteSymLink(obj);
+ 		break;
+ 	case YAFFS_OBJECT_TYPE_HARDLINK:
+-		yaffs_DeleteHardLink(obj);
++		retVal = yaffs_DeleteHardLink(obj);
+ 		break;
+ 	case YAFFS_OBJECT_TYPE_SPECIAL:
+-		yaffs_DoGenericObjectDeletion(obj);
++		retVal = yaffs_DoGenericObjectDeletion(obj);
+ 		break;
+ 	case YAFFS_OBJECT_TYPE_UNKNOWN:
++		retVal = 0;
+ 		break;		/* should not happen. */
+ 	}
++
++	return retVal;
+ }
+ 
+-static int yaffs_UnlinkWorker(yaffs_Object * obj)
++static int yaffs_UnlinkWorker(yaffs_Object *obj)
+ {
+ 
++	int immediateDeletion = 0;
++
++#ifdef __KERNEL__
++	if (!obj->myInode)
++		immediateDeletion = 1;
++#else
++	if (obj->inUse <= 0)
++		immediateDeletion = 1;
++#endif
++
+ 	if (obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) {
+ 		return yaffs_DeleteHardLink(obj);
+-	} else if (!list_empty(&obj->hardLinks)) {
++	} else if (!ylist_empty(&obj->hardLinks)) {
+ 		/* Curve ball: We're unlinking an object that has a hardlink.
+ 		 *
+ 		 * This problem arises because we are not strictly following
+@@ -5215,24 +5251,24 @@ static int yaffs_UnlinkWorker(yaffs_Obje
+ 		int retVal;
+ 		YCHAR name[YAFFS_MAX_NAME_LENGTH + 1];
+ 
+-		hl = list_entry(obj->hardLinks.next, yaffs_Object, hardLinks);
++		hl = ylist_entry(obj->hardLinks.next, yaffs_Object, hardLinks);
+ 
+-		list_del_init(&hl->hardLinks);
+-		list_del_init(&hl->siblings);
++		ylist_del_init(&hl->hardLinks);
++		ylist_del_init(&hl->siblings);
+ 
+ 		yaffs_GetObjectName(hl, name, YAFFS_MAX_NAME_LENGTH + 1);
+ 
+ 		retVal = yaffs_ChangeObjectName(obj, hl->parent, name, 0, 0);
+ 
+-		if (retVal == YAFFS_OK) {
++		if (retVal == YAFFS_OK)
+ 			retVal = yaffs_DoGenericObjectDeletion(hl);
+-		}
++
+ 		return retVal;
+ 
+-	} else {
++	} else if (immediateDeletion) {
+ 		switch (obj->variantType) {
+ 		case YAFFS_OBJECT_TYPE_FILE:
+-			return yaffs_UnlinkFile(obj);
++			return yaffs_DeleteFile(obj);
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_DIRECTORY:
+ 			return yaffs_DeleteDirectory(obj);
+@@ -5248,21 +5284,22 @@ static int yaffs_UnlinkWorker(yaffs_Obje
+ 		default:
+ 			return YAFFS_FAIL;
+ 		}
+-	}
++	} else
++		return yaffs_ChangeObjectName(obj, obj->myDev->unlinkedDir,
++					   _Y("unlinked"), 0, 0);
+ }
+ 
+ 
+-static int yaffs_UnlinkObject( yaffs_Object *obj)
++static int yaffs_UnlinkObject(yaffs_Object *obj)
+ {
+ 
+-	if (obj && obj->unlinkAllowed) {
++	if (obj && obj->unlinkAllowed)
+ 		return yaffs_UnlinkWorker(obj);
+-	}
+ 
+ 	return YAFFS_FAIL;
+ 
+ }
+-int yaffs_Unlink(yaffs_Object * dir, const YCHAR * name)
++int yaffs_Unlink(yaffs_Object *dir, const YCHAR *name)
+ {
+ 	yaffs_Object *obj;
+ 
+@@ -5272,8 +5309,8 @@ int yaffs_Unlink(yaffs_Object * dir, con
+ 
+ /*----------------------- Initialisation Scanning ---------------------- */
+ 
+-static void yaffs_HandleShadowedObject(yaffs_Device * dev, int objId,
+-				       int backwardScanning)
++static void yaffs_HandleShadowedObject(yaffs_Device *dev, int objId,
++				int backwardScanning)
+ {
+ 	yaffs_Object *obj;
+ 
+@@ -5286,9 +5323,8 @@ static void yaffs_HandleShadowedObject(y
+ 		/* Handle YAFFS2 case (backward scanning)
+ 		 * If the shadowed object exists then ignore.
+ 		 */
+-		if (yaffs_FindObjectByNumber(dev, objId)) {
++		if (yaffs_FindObjectByNumber(dev, objId))
+ 			return;
+-		}
+ 	}
+ 
+ 	/* Let's create it (if it does not exist) assuming it is a file so that it can do shrinking etc.
+@@ -5297,6 +5333,8 @@ static void yaffs_HandleShadowedObject(y
+ 	obj =
+ 	    yaffs_FindOrCreateObjectByNumber(dev, objId,
+ 					     YAFFS_OBJECT_TYPE_FILE);
++	if (!obj)
++		return;
+ 	yaffs_AddObjectToDirectory(dev->unlinkedDir, obj);
+ 	obj->variant.fileVariant.shrinkSize = 0;
+ 	obj->valid = 1;		/* So that we don't read any other info for this file */
+@@ -5325,44 +5363,77 @@ static void yaffs_HardlinkFixup(yaffs_De
+ 		if (in) {
+ 			/* Add the hardlink pointers */
+ 			hl->variant.hardLinkVariant.equivalentObject = in;
+-			list_add(&hl->hardLinks, &in->hardLinks);
++			ylist_add(&hl->hardLinks, &in->hardLinks);
+ 		} else {
+ 			/* Todo Need to report/handle this better.
+ 			 * Got a problem... hardlink to a non-existant object
+ 			 */
+ 			hl->variant.hardLinkVariant.equivalentObject = NULL;
+-			INIT_LIST_HEAD(&hl->hardLinks);
++			YINIT_LIST_HEAD(&hl->hardLinks);
+ 
+ 		}
+-
+ 	}
++}
++
++
+ 
++
++
++static int ybicmp(const void *a, const void *b)
++{
++	register int aseq = ((yaffs_BlockIndex *)a)->seq;
++	register int bseq = ((yaffs_BlockIndex *)b)->seq;
++	register int ablock = ((yaffs_BlockIndex *)a)->block;
++	register int bblock = ((yaffs_BlockIndex *)b)->block;
++	if (aseq == bseq)
++		return ablock - bblock;
++	else
++		return aseq - bseq;
+ }
+ 
+ 
++struct yaffs_ShadowFixerStruct {
++	int objectId;
++	int shadowedId;
++	struct yaffs_ShadowFixerStruct *next;
++};
++
+ 
++static void yaffs_StripDeletedObjects(yaffs_Device *dev)
++{
++	/*
++	*  Sort out state of unlinked and deleted objects after scanning.
++	*/
++	struct ylist_head *i;
++	struct ylist_head *n;
++	yaffs_Object *l;
+ 
++	/* Soft delete all the unlinked files */
++	ylist_for_each_safe(i, n,
++		&dev->unlinkedDir->variant.directoryVariant.children) {
++		if (i) {
++			l = ylist_entry(i, yaffs_Object, siblings);
++			yaffs_DeleteObject(l);
++		}
++	}
+ 
+-static int ybicmp(const void *a, const void *b){
+-    register int aseq = ((yaffs_BlockIndex *)a)->seq;
+-    register int bseq = ((yaffs_BlockIndex *)b)->seq;
+-    register int ablock = ((yaffs_BlockIndex *)a)->block;
+-    register int bblock = ((yaffs_BlockIndex *)b)->block;
+-    if( aseq == bseq )
+-        return ablock - bblock;
+-    else
+-        return aseq - bseq;
++	ylist_for_each_safe(i, n,
++		&dev->deletedDir->variant.directoryVariant.children) {
++		if (i) {
++			l = ylist_entry(i, yaffs_Object, siblings);
++			yaffs_DeleteObject(l);
++		}
++	}
+ 
+ }
+ 
+-static int yaffs_Scan(yaffs_Device * dev)
++static int yaffs_Scan(yaffs_Device *dev)
+ {
+ 	yaffs_ExtendedTags tags;
+ 	int blk;
+ 	int blockIterator;
+ 	int startIterator;
+ 	int endIterator;
+-	int nBlocksToScan = 0;
+ 	int result;
+ 
+ 	int chunk;
+@@ -5371,26 +5442,19 @@ static int yaffs_Scan(yaffs_Device * dev
+ 	yaffs_BlockState state;
+ 	yaffs_Object *hardList = NULL;
+ 	yaffs_BlockInfo *bi;
+-	int sequenceNumber;
++	__u32 sequenceNumber;
+ 	yaffs_ObjectHeader *oh;
+ 	yaffs_Object *in;
+ 	yaffs_Object *parent;
+-	int nBlocks = dev->internalEndBlock - dev->internalStartBlock + 1;
+ 
+ 	int alloc_failed = 0;
+ 
++	struct yaffs_ShadowFixerStruct *shadowFixerList = NULL;
++
+ 
+ 	__u8 *chunkData;
+ 
+-	yaffs_BlockIndex *blockIndex = NULL;
+ 
+-	if (dev->isYaffs2) {
+-		T(YAFFS_TRACE_SCAN,
+-		  (TSTR("yaffs_Scan is not for YAFFS2!" TENDSTR)));
+-		return YAFFS_FAIL;
+-	}
+-
+-	//TODO  Throw all the yaffs2 stuuf out of yaffs_Scan since it is only for yaffs1 format.
+ 
+ 	T(YAFFS_TRACE_SCAN,
+ 	  (TSTR("yaffs_Scan starts  intstartblk %d intendblk %d..." TENDSTR),
+@@ -5400,12 +5464,6 @@ static int yaffs_Scan(yaffs_Device * dev
+ 
+ 	dev->sequenceNumber = YAFFS_LOWEST_SEQUENCE_NUMBER;
+ 
+-	if (dev->isYaffs2) {
+-		blockIndex = YMALLOC(nBlocks * sizeof(yaffs_BlockIndex));
+-		if(!blockIndex)
+-			return YAFFS_FAIL;
+-	}
+-
+ 	/* Scan all the blocks to determine their state */
+ 	for (blk = dev->internalStartBlock; blk <= dev->internalEndBlock; blk++) {
+ 		bi = yaffs_GetBlockInfo(dev, blk);
+@@ -5418,6 +5476,9 @@ static int yaffs_Scan(yaffs_Device * dev
+ 		bi->blockState = state;
+ 		bi->sequenceNumber = sequenceNumber;
+ 
++		if (bi->sequenceNumber == YAFFS_SEQUENCE_BAD_BLOCK)
++			bi->blockState = state = YAFFS_BLOCK_STATE_DEAD;
++
+ 		T(YAFFS_TRACE_SCAN_DEBUG,
+ 		  (TSTR("Block scanning block %d state %d seq %d" TENDSTR), blk,
+ 		   state, sequenceNumber));
+@@ -5430,70 +5491,21 @@ static int yaffs_Scan(yaffs_Device * dev
+ 			  (TSTR("Block empty " TENDSTR)));
+ 			dev->nErasedBlocks++;
+ 			dev->nFreeChunks += dev->nChunksPerBlock;
+-		} else if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING) {
+-
+-			/* Determine the highest sequence number */
+-			if (dev->isYaffs2 &&
+-			    sequenceNumber >= YAFFS_LOWEST_SEQUENCE_NUMBER &&
+-			    sequenceNumber < YAFFS_HIGHEST_SEQUENCE_NUMBER) {
+-
+-				blockIndex[nBlocksToScan].seq = sequenceNumber;
+-				blockIndex[nBlocksToScan].block = blk;
+-
+-				nBlocksToScan++;
+-
+-				if (sequenceNumber >= dev->sequenceNumber) {
+-					dev->sequenceNumber = sequenceNumber;
+-				}
+-			} else if (dev->isYaffs2) {
+-				/* TODO: Nasty sequence number! */
+-				T(YAFFS_TRACE_SCAN,
+-				  (TSTR
+-				   ("Block scanning block %d has bad sequence number %d"
+-				    TENDSTR), blk, sequenceNumber));
+-
+-			}
+ 		}
+ 	}
+ 
+-	/* Sort the blocks
+-	 * Dungy old bubble sort for now...
+-	 */
+-	if (dev->isYaffs2) {
+-		yaffs_BlockIndex temp;
+-		int i;
+-		int j;
+-
+-		for (i = 0; i < nBlocksToScan; i++)
+-			for (j = i + 1; j < nBlocksToScan; j++)
+-				if (blockIndex[i].seq > blockIndex[j].seq) {
+-					temp = blockIndex[j];
+-					blockIndex[j] = blockIndex[i];
+-					blockIndex[i] = temp;
+-				}
+-	}
+-
+-	/* Now scan the blocks looking at the data. */
+-	if (dev->isYaffs2) {
+-		startIterator = 0;
+-		endIterator = nBlocksToScan - 1;
+-		T(YAFFS_TRACE_SCAN_DEBUG,
+-		  (TSTR("%d blocks to be scanned" TENDSTR), nBlocksToScan));
+-	} else {
+-		startIterator = dev->internalStartBlock;
+-		endIterator = dev->internalEndBlock;
+-	}
++	startIterator = dev->internalStartBlock;
++	endIterator = dev->internalEndBlock;
+ 
+ 	/* For each block.... */
+ 	for (blockIterator = startIterator; !alloc_failed && blockIterator <= endIterator;
+ 	     blockIterator++) {
+ 
+-		if (dev->isYaffs2) {
+-			/* get the block to scan in the correct order */
+-			blk = blockIndex[blockIterator].block;
+-		} else {
+-			blk = blockIterator;
+-		}
++		YYIELD();
++
++		YYIELD();
++
++		blk = blockIterator;
+ 
+ 		bi = yaffs_GetBlockInfo(dev, blk);
+ 		state = bi->blockState;
+@@ -5511,7 +5523,7 @@ static int yaffs_Scan(yaffs_Device * dev
+ 
+ 			/* Let's have a good look at this chunk... */
+ 
+-			if (!dev->isYaffs2 && tags.chunkDeleted) {
++			if (tags.eccResult == YAFFS_ECC_RESULT_UNFIXED || tags.chunkDeleted) {
+ 				/* YAFFS1 only...
+ 				 * A deleted chunk
+ 				 */
+@@ -5540,18 +5552,6 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					dev->allocationBlockFinder = blk;
+ 					/* Set it to here to encourage the allocator to go forth from here. */
+ 
+-					/* Yaffs2 sanity check:
+-					 * This should be the one with the highest sequence number
+-					 */
+-					if (dev->isYaffs2
+-					    && (dev->sequenceNumber !=
+-						bi->sequenceNumber)) {
+-						T(YAFFS_TRACE_ALWAYS,
+-						  (TSTR
+-						   ("yaffs: Allocation block %d was not highest sequence id:"
+-						    " block seq = %d, dev seq = %d"
+-						    TENDSTR), blk,bi->sequenceNumber,dev->sequenceNumber));
+-					}
+ 				}
+ 
+ 				dev->nFreeChunks += (dev->nChunksPerBlock - c);
+@@ -5570,11 +5570,11 @@ static int yaffs_Scan(yaffs_Device * dev
+ 				 * the same chunkId).
+ 				 */
+ 
+-				if(!in)
++				if (!in)
+ 					alloc_failed = 1;
+ 
+-				if(in){
+-					if(!yaffs_PutChunkIntoFile(in, tags.chunkId, chunk,1))
++				if (in) {
++					if (!yaffs_PutChunkIntoFile(in, tags.chunkId, chunk, 1))
+ 						alloc_failed = 1;
+ 				}
+ 
+@@ -5617,7 +5617,7 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					 * deleted, and worse still it has changed type. Delete the old object.
+ 					 */
+ 
+-					yaffs_DestroyObject(in);
++					yaffs_DeleteObject(in);
+ 
+ 					in = 0;
+ 				}
+@@ -5627,14 +5627,20 @@ static int yaffs_Scan(yaffs_Device * dev
+ 								      objectId,
+ 								      oh->type);
+ 
+-				if(!in)
++				if (!in)
+ 					alloc_failed = 1;
+ 
+ 				if (in && oh->shadowsObject > 0) {
+-					yaffs_HandleShadowedObject(dev,
+-								   oh->
+-								   shadowsObject,
+-								   0);
++
++					struct yaffs_ShadowFixerStruct *fixer;
++					fixer = YMALLOC(sizeof(struct yaffs_ShadowFixerStruct));
++					if (fixer) {
++						fixer->next = shadowFixerList;
++						shadowFixerList = fixer;
++						fixer->objectId = tags.objectId;
++						fixer->shadowedId = oh->shadowsObject;
++					}
++
+ 				}
+ 
+ 				if (in && in->valid) {
+@@ -5643,12 +5649,10 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					unsigned existingSerial = in->serial;
+ 					unsigned newSerial = tags.serialNumber;
+ 
+-					if (dev->isYaffs2 ||
+-					    ((existingSerial + 1) & 3) ==
+-					    newSerial) {
++					if (((existingSerial + 1) & 3) == newSerial) {
+ 						/* Use new one - destroy the exisiting one */
+ 						yaffs_DeleteChunk(dev,
+-								  in->chunkId,
++								  in->hdrChunk,
+ 								  1, __LINE__);
+ 						in->valid = 0;
+ 					} else {
+@@ -5681,7 +5685,8 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					in->yst_ctime = oh->yst_ctime;
+ 					in->yst_rdev = oh->yst_rdev;
+ #endif
+-					in->chunkId = chunk;
++					in->hdrChunk = chunk;
++					in->serial = tags.serialNumber;
+ 
+ 				} else if (in && !in->valid) {
+ 					/* we need to load this info */
+@@ -5705,7 +5710,8 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					in->yst_ctime = oh->yst_ctime;
+ 					in->yst_rdev = oh->yst_rdev;
+ #endif
+-					in->chunkId = chunk;
++					in->hdrChunk = chunk;
++					in->serial = tags.serialNumber;
+ 
+ 					yaffs_SetObjectName(in, oh->name);
+ 					in->dirty = 0;
+@@ -5718,25 +5724,25 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					    yaffs_FindOrCreateObjectByNumber
+ 					    (dev, oh->parentObjectId,
+ 					     YAFFS_OBJECT_TYPE_DIRECTORY);
+-					if (parent->variantType ==
++					if (!parent)
++						alloc_failed = 1;
++					if (parent && parent->variantType ==
+ 					    YAFFS_OBJECT_TYPE_UNKNOWN) {
+ 						/* Set up as a directory */
+ 						parent->variantType =
+-						    YAFFS_OBJECT_TYPE_DIRECTORY;
+-						INIT_LIST_HEAD(&parent->variant.
+-							       directoryVariant.
+-							       children);
+-					} else if (parent->variantType !=
+-						   YAFFS_OBJECT_TYPE_DIRECTORY)
+-					{
++							YAFFS_OBJECT_TYPE_DIRECTORY;
++						YINIT_LIST_HEAD(&parent->variant.
++								directoryVariant.
++								children);
++					} else if (!parent || parent->variantType !=
++						   YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 						/* Hoosterman, another problem....
+ 						 * We're trying to use a non-directory as a directory
+ 						 */
+ 
+ 						T(YAFFS_TRACE_ERROR,
+ 						  (TSTR
+-						   ("yaffs tragedy: attempting to use non-directory as"
+-						    " a directory in scan. Put in lost+found."
++						   ("yaffs tragedy: attempting to use non-directory as a directory in scan. Put in lost+found."
+ 						    TENDSTR)));
+ 						parent = dev->lostNFoundDir;
+ 					}
+@@ -5760,15 +5766,6 @@ static int yaffs_Scan(yaffs_Device * dev
+ 						/* Todo got a problem */
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_FILE:
+-						if (dev->isYaffs2
+-						    && oh->isShrink) {
+-							/* Prune back the shrunken chunks */
+-							yaffs_PruneResizedChunks
+-							    (in, oh->fileSize);
+-							/* Mark the block as having a shrinkHeader */
+-							bi->hasShrinkHeader = 1;
+-						}
+-
+ 						if (dev->useHeaderFileSize)
+ 
+ 							in->variant.fileVariant.
+@@ -5778,11 +5775,11 @@ static int yaffs_Scan(yaffs_Device * dev
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_HARDLINK:
+ 						in->variant.hardLinkVariant.
+-						    equivalentObjectId =
+-						    oh->equivalentObjectId;
++							equivalentObjectId =
++							oh->equivalentObjectId;
+ 						in->hardLinks.next =
+-						    (struct list_head *)
+-						    hardList;
++							(struct ylist_head *)
++							hardList;
+ 						hardList = in;
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_DIRECTORY:
+@@ -5794,15 +5791,17 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					case YAFFS_OBJECT_TYPE_SYMLINK:
+ 						in->variant.symLinkVariant.alias =
+ 						    yaffs_CloneString(oh->alias);
+-						if(!in->variant.symLinkVariant.alias)
++						if (!in->variant.symLinkVariant.alias)
+ 							alloc_failed = 1;
+ 						break;
+ 					}
+ 
++/*
+ 					if (parent == dev->deletedDir) {
+ 						yaffs_DestroyObject(in);
+ 						bi->hasShrinkHeader = 1;
+ 					}
++*/
+ 				}
+ 			}
+ 		}
+@@ -5823,10 +5822,6 @@ static int yaffs_Scan(yaffs_Device * dev
+ 
+ 	}
+ 
+-	if (blockIndex) {
+-		YFREE(blockIndex);
+-	}
+-
+ 
+ 	/* Ok, we've done all the scanning.
+ 	 * Fix up the hard link chains.
+@@ -5834,32 +5829,36 @@ static int yaffs_Scan(yaffs_Device * dev
+ 	 * hardlinks.
+ 	 */
+ 
+-	yaffs_HardlinkFixup(dev,hardList);
++	yaffs_HardlinkFixup(dev, hardList);
+ 
+-	/* Handle the unlinked files. Since they were left in an unlinked state we should
+-	 * just delete them.
+-	 */
++	/* Fix up any shadowed objects */
+ 	{
+-		struct list_head *i;
+-		struct list_head *n;
++		struct yaffs_ShadowFixerStruct *fixer;
++		yaffs_Object *obj;
+ 
+-		yaffs_Object *l;
+-		/* Soft delete all the unlinked files */
+-		list_for_each_safe(i, n,
+-				   &dev->unlinkedDir->variant.directoryVariant.
+-				   children) {
+-			if (i) {
+-				l = list_entry(i, yaffs_Object, siblings);
+-				yaffs_DestroyObject(l);
+-			}
++		while (shadowFixerList) {
++			fixer = shadowFixerList;
++			shadowFixerList = fixer->next;
++			/* Complete the rename transaction by deleting the shadowed object
++			 * then setting the object header to unshadowed.
++			 */
++			obj = yaffs_FindObjectByNumber(dev, fixer->shadowedId);
++			if (obj)
++				yaffs_DeleteObject(obj);
++
++			obj = yaffs_FindObjectByNumber(dev, fixer->objectId);
++
++			if (obj)
++				yaffs_UpdateObjectHeader(obj, NULL, 1, 0, 0);
++
++			YFREE(fixer);
+ 		}
+ 	}
+ 
+ 	yaffs_ReleaseTempBuffer(dev, chunkData, __LINE__);
+ 
+-	if(alloc_failed){
++	if (alloc_failed)
+ 		return YAFFS_FAIL;
+-	}
+ 
+ 	T(YAFFS_TRACE_SCAN, (TSTR("yaffs_Scan ends" TENDSTR)));
+ 
+@@ -5871,25 +5870,27 @@ static void yaffs_CheckObjectDetailsLoad
+ {
+ 	__u8 *chunkData;
+ 	yaffs_ObjectHeader *oh;
+-	yaffs_Device *dev = in->myDev;
++	yaffs_Device *dev;
+ 	yaffs_ExtendedTags tags;
+ 	int result;
+ 	int alloc_failed = 0;
+ 
+-	if(!in)
++	if (!in)
+ 		return;
+ 
++	dev = in->myDev;
++
+ #if 0
+-	T(YAFFS_TRACE_SCAN,(TSTR("details for object %d %s loaded" TENDSTR),
++	T(YAFFS_TRACE_SCAN, (TSTR("details for object %d %s loaded" TENDSTR),
+ 		in->objectId,
+ 		in->lazyLoaded ? "not yet" : "already"));
+ #endif
+ 
+-	if(in->lazyLoaded){
++	if (in->lazyLoaded && in->hdrChunk > 0) {
+ 		in->lazyLoaded = 0;
+ 		chunkData = yaffs_GetTempBuffer(dev, __LINE__);
+ 
+-		result = yaffs_ReadChunkWithTagsFromNAND(dev,in->chunkId,chunkData,&tags);
++		result = yaffs_ReadChunkWithTagsFromNAND(dev, in->hdrChunk, chunkData, &tags);
+ 		oh = (yaffs_ObjectHeader *) chunkData;
+ 
+ 		in->yst_mode = oh->yst_mode;
+@@ -5911,18 +5912,18 @@ static void yaffs_CheckObjectDetailsLoad
+ #endif
+ 		yaffs_SetObjectName(in, oh->name);
+ 
+-		if(in->variantType == YAFFS_OBJECT_TYPE_SYMLINK){
+-			 in->variant.symLinkVariant.alias =
++		if (in->variantType == YAFFS_OBJECT_TYPE_SYMLINK) {
++			in->variant.symLinkVariant.alias =
+ 						    yaffs_CloneString(oh->alias);
+-			if(!in->variant.symLinkVariant.alias)
++			if (!in->variant.symLinkVariant.alias)
+ 				alloc_failed = 1; /* Not returned to caller */
+ 		}
+ 
+-		yaffs_ReleaseTempBuffer(dev,chunkData, __LINE__);
++		yaffs_ReleaseTempBuffer(dev, chunkData, __LINE__);
+ 	}
+ }
+ 
+-static int yaffs_ScanBackwards(yaffs_Device * dev)
++static int yaffs_ScanBackwards(yaffs_Device *dev)
+ {
+ 	yaffs_ExtendedTags tags;
+ 	int blk;
+@@ -5938,7 +5939,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 	yaffs_BlockState state;
+ 	yaffs_Object *hardList = NULL;
+ 	yaffs_BlockInfo *bi;
+-	int sequenceNumber;
++	__u32 sequenceNumber;
+ 	yaffs_ObjectHeader *oh;
+ 	yaffs_Object *in;
+ 	yaffs_Object *parent;
+@@ -5972,12 +5973,12 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 	blockIndex = YMALLOC(nBlocks * sizeof(yaffs_BlockIndex));
+ 
+-	if(!blockIndex) {
++	if (!blockIndex) {
+ 		blockIndex = YMALLOC_ALT(nBlocks * sizeof(yaffs_BlockIndex));
+ 		altBlockIndex = 1;
+ 	}
+ 
+-	if(!blockIndex) {
++	if (!blockIndex) {
+ 		T(YAFFS_TRACE_SCAN,
+ 		  (TSTR("yaffs_Scan() could not allocate block index!" TENDSTR)));
+ 		return YAFFS_FAIL;
+@@ -5999,15 +6000,17 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 		bi->blockState = state;
+ 		bi->sequenceNumber = sequenceNumber;
+ 
+-		if(bi->sequenceNumber == YAFFS_SEQUENCE_CHECKPOINT_DATA)
++		if (bi->sequenceNumber == YAFFS_SEQUENCE_CHECKPOINT_DATA)
+ 			bi->blockState = state = YAFFS_BLOCK_STATE_CHECKPOINT;
++		if (bi->sequenceNumber == YAFFS_SEQUENCE_BAD_BLOCK)
++			bi->blockState = state = YAFFS_BLOCK_STATE_DEAD;
+ 
+ 		T(YAFFS_TRACE_SCAN_DEBUG,
+ 		  (TSTR("Block scanning block %d state %d seq %d" TENDSTR), blk,
+ 		   state, sequenceNumber));
+ 
+ 
+-		if(state == YAFFS_BLOCK_STATE_CHECKPOINT){
++		if (state == YAFFS_BLOCK_STATE_CHECKPOINT) {
+ 			dev->blocksInCheckpoint++;
+ 
+ 		} else if (state == YAFFS_BLOCK_STATE_DEAD) {
+@@ -6021,8 +6024,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 		} else if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING) {
+ 
+ 			/* Determine the highest sequence number */
+-			if (dev->isYaffs2 &&
+-			    sequenceNumber >= YAFFS_LOWEST_SEQUENCE_NUMBER &&
++			if (sequenceNumber >= YAFFS_LOWEST_SEQUENCE_NUMBER &&
+ 			    sequenceNumber < YAFFS_HIGHEST_SEQUENCE_NUMBER) {
+ 
+ 				blockIndex[nBlocksToScan].seq = sequenceNumber;
+@@ -6030,10 +6032,9 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 				nBlocksToScan++;
+ 
+-				if (sequenceNumber >= dev->sequenceNumber) {
++				if (sequenceNumber >= dev->sequenceNumber)
+ 					dev->sequenceNumber = sequenceNumber;
+-				}
+-			} else if (dev->isYaffs2) {
++			} else {
+ 				/* TODO: Nasty sequence number! */
+ 				T(YAFFS_TRACE_SCAN,
+ 				  (TSTR
+@@ -6053,11 +6054,13 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 	/* Sort the blocks */
+ #ifndef CONFIG_YAFFS_USE_OWN_SORT
+-	yaffs_qsort(blockIndex, nBlocksToScan,
+-		sizeof(yaffs_BlockIndex), ybicmp);
++	{
++		/* Use qsort now. */
++		yaffs_qsort(blockIndex, nBlocksToScan, sizeof(yaffs_BlockIndex), ybicmp);
++	}
+ #else
+ 	{
+-	 	/* Dungy old bubble sort... */
++		/* Dungy old bubble sort... */
+ 
+ 		yaffs_BlockIndex temp;
+ 		int i;
+@@ -6075,7 +6078,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 	YYIELD();
+ 
+-    	T(YAFFS_TRACE_SCAN, (TSTR("...done" TENDSTR)));
++	T(YAFFS_TRACE_SCAN, (TSTR("...done" TENDSTR)));
+ 
+ 	/* Now scan the blocks looking at the data. */
+ 	startIterator = 0;
+@@ -6085,10 +6088,10 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 	/* For each block.... backwards */
+ 	for (blockIterator = endIterator; !alloc_failed && blockIterator >= startIterator;
+-	     blockIterator--) {
+-	        /* Cooperative multitasking! This loop can run for so
++			blockIterator--) {
++		/* Cooperative multitasking! This loop can run for so
+ 		   long that watchdog timers expire. */
+-	        YYIELD();
++		YYIELD();
+ 
+ 		/* get the block to scan in the correct order */
+ 		blk = blockIndex[blockIterator].block;
+@@ -6127,10 +6130,8 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 				 * this is the one being allocated from
+ 				 */
+ 
+-				if(foundChunksInBlock)
+-				{
++				if (foundChunksInBlock) {
+ 					/* This is a chunk that was skipped due to failing the erased check */
+-
+ 				} else if (c == 0) {
+ 					/* We're looking at the first chunk in the block so the block is unused */
+ 					state = YAFFS_BLOCK_STATE_EMPTY;
+@@ -6138,7 +6139,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 				} else {
+ 					if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING ||
+ 					    state == YAFFS_BLOCK_STATE_ALLOCATING) {
+-					    	if(dev->sequenceNumber == bi->sequenceNumber) {
++						if (dev->sequenceNumber == bi->sequenceNumber) {
+ 							/* this is the block being allocated from */
+ 
+ 							T(YAFFS_TRACE_SCAN,
+@@ -6150,27 +6151,31 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 							dev->allocationBlock = blk;
+ 							dev->allocationPage = c;
+ 							dev->allocationBlockFinder = blk;
+-						}
+-						else {
++						} else {
+ 							/* This is a partially written block that is not
+ 							 * the current allocation block. This block must have
+ 							 * had a write failure, so set up for retirement.
+ 							 */
+ 
+-							 bi->needsRetiring = 1;
++							 /* bi->needsRetiring = 1; ??? TODO */
+ 							 bi->gcPrioritise = 1;
+ 
+ 							 T(YAFFS_TRACE_ALWAYS,
+-							 (TSTR("Partially written block %d being set for retirement" TENDSTR),
++							 (TSTR("Partially written block %d detected" TENDSTR),
+ 							 blk));
+ 						}
+-
+ 					}
+-
+ 				}
+ 
+ 				dev->nFreeChunks++;
+ 
++			} else if (tags.eccResult == YAFFS_ECC_RESULT_UNFIXED) {
++				T(YAFFS_TRACE_SCAN,
++				  (TSTR(" Unfixed ECC in chunk(%d:%d), chunk ignored"TENDSTR),
++				  blk, c));
++
++				  dev->nFreeChunks++;
++
+ 			} else if (tags.chunkId > 0) {
+ 				/* chunkId > 0 so it is a data chunk... */
+ 				unsigned int endpos;
+@@ -6187,7 +6192,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 								      tags.
+ 								      objectId,
+ 								      YAFFS_OBJECT_TYPE_FILE);
+-				if(!in){
++				if (!in) {
+ 					/* Out of memory */
+ 					alloc_failed = 1;
+ 				}
+@@ -6197,8 +6202,8 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 				    && chunkBase <
+ 				    in->variant.fileVariant.shrinkSize) {
+ 					/* This has not been invalidated by a resize */
+-					if(!yaffs_PutChunkIntoFile(in, tags.chunkId,
+-							       chunk, -1)){
++					if (!yaffs_PutChunkIntoFile(in, tags.chunkId,
++							       chunk, -1)) {
+ 						alloc_failed = 1;
+ 					}
+ 
+@@ -6221,7 +6226,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 						    scannedFileSize;
+ 					}
+ 
+-				} else if(in) {
++				} else if (in) {
+ 					/* This chunk has been invalidated by a resize, so delete */
+ 					yaffs_DeleteChunk(dev, chunk, 1, __LINE__);
+ 
+@@ -6242,6 +6247,8 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 					in = yaffs_FindOrCreateObjectByNumber
+ 					    (dev, tags.objectId,
+ 					     tags.extraObjectType);
++					if (!in)
++						alloc_failed = 1;
+ 				}
+ 
+ 				if (!in ||
+@@ -6251,8 +6258,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 				    tags.extraShadows ||
+ 				    (!in->valid &&
+ 				    (tags.objectId == YAFFS_OBJECTID_ROOT ||
+-				     tags.objectId == YAFFS_OBJECTID_LOSTNFOUND))
+-				    ) {
++				     tags.objectId == YAFFS_OBJECTID_LOSTNFOUND))) {
+ 
+ 					/* If we don't have  valid info then we need to read the chunk
+ 					 * TODO In future we can probably defer reading the chunk and
+@@ -6266,8 +6272,17 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 					oh = (yaffs_ObjectHeader *) chunkData;
+ 
+-					if (!in)
++					if (dev->inbandTags) {
++						/* Fix up the header if they got corrupted by inband tags */
++						oh->shadowsObject = oh->inbandShadowsObject;
++						oh->isShrink = oh->inbandIsShrink;
++					}
++
++					if (!in) {
+ 						in = yaffs_FindOrCreateObjectByNumber(dev, tags.objectId, oh->type);
++						if (!in)
++							alloc_failed = 1;
++					}
+ 
+ 				}
+ 
+@@ -6275,10 +6290,9 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 					/* TODO Hoosterman we have a problem! */
+ 					T(YAFFS_TRACE_ERROR,
+ 					  (TSTR
+-					   ("yaffs tragedy: Could not make object for object  %d  "
+-					    "at chunk %d during scan"
++					   ("yaffs tragedy: Could not make object for object  %d at chunk %d during scan"
+ 					    TENDSTR), tags.objectId, chunk));
+-
++					continue;
+ 				}
+ 
+ 				if (in->valid) {
+@@ -6289,10 +6303,9 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 					if ((in->variantType == YAFFS_OBJECT_TYPE_FILE) &&
+ 					     ((oh &&
+-					       oh-> type == YAFFS_OBJECT_TYPE_FILE)||
++					       oh->type == YAFFS_OBJECT_TYPE_FILE) ||
+ 					      (tags.extraHeaderInfoAvailable  &&
+-					       tags.extraObjectType == YAFFS_OBJECT_TYPE_FILE))
+-					    ) {
++					       tags.extraObjectType == YAFFS_OBJECT_TYPE_FILE))) {
+ 						__u32 thisSize =
+ 						    (oh) ? oh->fileSize : tags.
+ 						    extraFileLength;
+@@ -6300,7 +6313,9 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 						    (oh) ? oh->
+ 						    parentObjectId : tags.
+ 						    extraParentObjectId;
+-						unsigned isShrink =
++
++
++						isShrink =
+ 						    (oh) ? oh->isShrink : tags.
+ 						    extraIsShrinkHeader;
+ 
+@@ -6323,9 +6338,8 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 							    thisSize;
+ 						}
+ 
+-						if (isShrink) {
++						if (isShrink)
+ 							bi->hasShrinkHeader = 1;
+-						}
+ 
+ 					}
+ 					/* Use existing - destroy this one. */
+@@ -6333,6 +6347,17 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 				}
+ 
++				if (!in->valid && in->variantType !=
++				    (oh ? oh->type : tags.extraObjectType))
++					T(YAFFS_TRACE_ERROR, (
++						TSTR("yaffs tragedy: Bad object type, "
++					    TCONT("%d != %d, for object %d at chunk ")
++					    TCONT("%d during scan")
++						TENDSTR), oh ?
++					    oh->type : tags.extraObjectType,
++					    in->variantType, tags.objectId,
++					    chunk));
++
+ 				if (!in->valid &&
+ 				    (tags.objectId == YAFFS_OBJECTID_ROOT ||
+ 				     tags.objectId ==
+@@ -6340,7 +6365,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 					/* We only load some info, don't fiddle with directory structure */
+ 					in->valid = 1;
+ 
+-					if(oh) {
++					if (oh) {
+ 						in->variantType = oh->type;
+ 
+ 						in->yst_mode = oh->yst_mode;
+@@ -6365,15 +6390,15 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 						in->lazyLoaded = 1;
+ 					}
+ 
+-					in->chunkId = chunk;
++					in->hdrChunk = chunk;
+ 
+ 				} else if (!in->valid) {
+ 					/* we need to load this info */
+ 
+ 					in->valid = 1;
+-					in->chunkId = chunk;
++					in->hdrChunk = chunk;
+ 
+-					if(oh) {
++					if (oh) {
+ 						in->variantType = oh->type;
+ 
+ 						in->yst_mode = oh->yst_mode;
+@@ -6403,20 +6428,19 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 						yaffs_SetObjectName(in, oh->name);
+ 						parent =
+ 						    yaffs_FindOrCreateObjectByNumber
+-					    		(dev, oh->parentObjectId,
+-					     		 YAFFS_OBJECT_TYPE_DIRECTORY);
++							(dev, oh->parentObjectId,
++							 YAFFS_OBJECT_TYPE_DIRECTORY);
+ 
+ 						 fileSize = oh->fileSize;
+- 						 isShrink = oh->isShrink;
++						 isShrink = oh->isShrink;
+ 						 equivalentObjectId = oh->equivalentObjectId;
+ 
+-					}
+-					else {
++					} else {
+ 						in->variantType = tags.extraObjectType;
+ 						parent =
+ 						    yaffs_FindOrCreateObjectByNumber
+-					    		(dev, tags.extraParentObjectId,
+-					     		 YAFFS_OBJECT_TYPE_DIRECTORY);
++							(dev, tags.extraParentObjectId,
++							 YAFFS_OBJECT_TYPE_DIRECTORY);
+ 						 fileSize = tags.extraFileLength;
+ 						 isShrink = tags.extraIsShrinkHeader;
+ 						 equivalentObjectId = tags.extraEquivalentObjectId;
+@@ -6425,29 +6449,30 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 					}
+ 					in->dirty = 0;
+ 
++					if (!parent)
++						alloc_failed = 1;
++
+ 					/* directory stuff...
+ 					 * hook up to parent
+ 					 */
+ 
+-					if (parent->variantType ==
++					if (parent && parent->variantType ==
+ 					    YAFFS_OBJECT_TYPE_UNKNOWN) {
+ 						/* Set up as a directory */
+ 						parent->variantType =
+-						    YAFFS_OBJECT_TYPE_DIRECTORY;
+-						INIT_LIST_HEAD(&parent->variant.
+-							       directoryVariant.
+-							       children);
+-					} else if (parent->variantType !=
+-						   YAFFS_OBJECT_TYPE_DIRECTORY)
+-					{
++							YAFFS_OBJECT_TYPE_DIRECTORY;
++						YINIT_LIST_HEAD(&parent->variant.
++							directoryVariant.
++							children);
++					} else if (!parent || parent->variantType !=
++						   YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 						/* Hoosterman, another problem....
+ 						 * We're trying to use a non-directory as a directory
+ 						 */
+ 
+ 						T(YAFFS_TRACE_ERROR,
+ 						  (TSTR
+-						   ("yaffs tragedy: attempting to use non-directory as"
+-						    " a directory in scan. Put in lost+found."
++						   ("yaffs tragedy: attempting to use non-directory as a directory in scan. Put in lost+found."
+ 						    TENDSTR)));
+ 						parent = dev->lostNFoundDir;
+ 					}
+@@ -6494,12 +6519,12 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_HARDLINK:
+-						if(!itsUnlinked) {
+-						  in->variant.hardLinkVariant.equivalentObjectId =
+-						    equivalentObjectId;
+-						  in->hardLinks.next =
+-						    (struct list_head *) hardList;
+-						  hardList = in;
++						if (!itsUnlinked) {
++							in->variant.hardLinkVariant.equivalentObjectId =
++								equivalentObjectId;
++							in->hardLinks.next =
++								(struct ylist_head *) hardList;
++							hardList = in;
+ 						}
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_DIRECTORY:
+@@ -6509,12 +6534,11 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 						/* Do nothing */
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_SYMLINK:
+-						if(oh){
+-						   in->variant.symLinkVariant.alias =
+-						    yaffs_CloneString(oh->
+-								      alias);
+-						   if(!in->variant.symLinkVariant.alias)
+-						   	alloc_failed = 1;
++						if (oh) {
++							in->variant.symLinkVariant.alias =
++								yaffs_CloneString(oh->alias);
++							if (!in->variant.symLinkVariant.alias)
++								alloc_failed = 1;
+ 						}
+ 						break;
+ 					}
+@@ -6551,75 +6575,129 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 	 * We should now have scanned all the objects, now it's time to add these
+ 	 * hardlinks.
+ 	 */
+-	yaffs_HardlinkFixup(dev,hardList);
++	yaffs_HardlinkFixup(dev, hardList);
+ 
+ 
+-	/*
+-	*  Sort out state of unlinked and deleted objects.
+-	*/
+-	{
+-		struct list_head *i;
+-		struct list_head *n;
++	yaffs_ReleaseTempBuffer(dev, chunkData, __LINE__);
+ 
+-		yaffs_Object *l;
++	if (alloc_failed)
++		return YAFFS_FAIL;
+ 
+-		/* Soft delete all the unlinked files */
+-		list_for_each_safe(i, n,
+-				   &dev->unlinkedDir->variant.directoryVariant.
+-				   children) {
+-			if (i) {
+-				l = list_entry(i, yaffs_Object, siblings);
+-				yaffs_DestroyObject(l);
+-			}
+-		}
++	T(YAFFS_TRACE_SCAN, (TSTR("yaffs_ScanBackwards ends" TENDSTR)));
+ 
+-		/* Soft delete all the deletedDir files */
+-		list_for_each_safe(i, n,
+-				   &dev->deletedDir->variant.directoryVariant.
+-				   children) {
+-			if (i) {
+-				l = list_entry(i, yaffs_Object, siblings);
+-				yaffs_DestroyObject(l);
++	return YAFFS_OK;
++}
+ 
+-			}
++/*------------------------------  Directory Functions ----------------------------- */
++
++static void yaffs_VerifyObjectInDirectory(yaffs_Object *obj)
++{
++	struct ylist_head *lh;
++	yaffs_Object *listObj;
++
++	int count = 0;
++
++	if (!obj) {
++		T(YAFFS_TRACE_ALWAYS, (TSTR("No object to verify" TENDSTR)));
++		YBUG();
++		return;
++	}
++
++	if (yaffs_SkipVerification(obj->myDev))
++		return;
++
++	if (!obj->parent) {
++		T(YAFFS_TRACE_ALWAYS, (TSTR("Object does not have parent" TENDSTR)));
++		YBUG();
++		return;
++	}
++
++	if (obj->parent->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
++		T(YAFFS_TRACE_ALWAYS, (TSTR("Parent is not directory" TENDSTR)));
++		YBUG();
++	}
++
++	/* Iterate through the objects in each hash entry */
++
++	ylist_for_each(lh, &obj->parent->variant.directoryVariant.children) {
++		if (lh) {
++			listObj = ylist_entry(lh, yaffs_Object, siblings);
++			yaffs_VerifyObject(listObj);
++			if (obj == listObj)
++				count++;
+ 		}
++	 }
++
++	if (count != 1) {
++		T(YAFFS_TRACE_ALWAYS, (TSTR("Object in directory %d times" TENDSTR), count));
++		YBUG();
+ 	}
++}
+ 
+-	yaffs_ReleaseTempBuffer(dev, chunkData, __LINE__);
++static void yaffs_VerifyDirectory(yaffs_Object *directory)
++{
++	struct ylist_head *lh;
++	yaffs_Object *listObj;
+ 
+-	if(alloc_failed){
+-		return YAFFS_FAIL;
++	if (!directory) {
++		YBUG();
++		return;
+ 	}
+ 
+-	T(YAFFS_TRACE_SCAN, (TSTR("yaffs_ScanBackwards ends" TENDSTR)));
++	if (yaffs_SkipFullVerification(directory->myDev))
++		return;
+ 
+-	return YAFFS_OK;
++	if (directory->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
++		T(YAFFS_TRACE_ALWAYS, (TSTR("Directory has wrong type: %d" TENDSTR), directory->variantType));
++		YBUG();
++	}
++
++	/* Iterate through the objects in each hash entry */
++
++	ylist_for_each(lh, &directory->variant.directoryVariant.children) {
++		if (lh) {
++			listObj = ylist_entry(lh, yaffs_Object, siblings);
++			if (listObj->parent != directory) {
++				T(YAFFS_TRACE_ALWAYS, (TSTR("Object in directory list has wrong parent %p" TENDSTR), listObj->parent));
++				YBUG();
++			}
++			yaffs_VerifyObjectInDirectory(listObj);
++		}
++	}
+ }
+ 
+-/*------------------------------  Directory Functions ----------------------------- */
+ 
+-static void yaffs_RemoveObjectFromDirectory(yaffs_Object * obj)
++static void yaffs_RemoveObjectFromDirectory(yaffs_Object *obj)
+ {
+ 	yaffs_Device *dev = obj->myDev;
++	yaffs_Object *parent;
++
++	yaffs_VerifyObjectInDirectory(obj);
++	parent = obj->parent;
++
++	yaffs_VerifyDirectory(parent);
+ 
+-	if(dev && dev->removeObjectCallback)
++	if (dev && dev->removeObjectCallback)
+ 		dev->removeObjectCallback(obj);
+ 
+-	list_del_init(&obj->siblings);
++
++	ylist_del_init(&obj->siblings);
+ 	obj->parent = NULL;
++
++	yaffs_VerifyDirectory(parent);
+ }
+ 
+ 
+-static void yaffs_AddObjectToDirectory(yaffs_Object * directory,
+-				       yaffs_Object * obj)
++static void yaffs_AddObjectToDirectory(yaffs_Object *directory,
++					yaffs_Object *obj)
+ {
+-
+ 	if (!directory) {
+ 		T(YAFFS_TRACE_ALWAYS,
+ 		  (TSTR
+ 		   ("tragedy: Trying to add an object to a null pointer directory"
+ 		    TENDSTR)));
+ 		YBUG();
++		return;
+ 	}
+ 	if (directory->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 		T(YAFFS_TRACE_ALWAYS,
+@@ -6631,37 +6709,42 @@ static void yaffs_AddObjectToDirectory(y
+ 
+ 	if (obj->siblings.prev == NULL) {
+ 		/* Not initialised */
+-		INIT_LIST_HEAD(&obj->siblings);
+-
+-	} else if (!list_empty(&obj->siblings)) {
+-		/* If it is holed up somewhere else, un hook it */
+-		yaffs_RemoveObjectFromDirectory(obj);
++		YBUG();
+ 	}
++
++
++	yaffs_VerifyDirectory(directory);
++
++	yaffs_RemoveObjectFromDirectory(obj);
++
++
+ 	/* Now add it */
+-	list_add(&obj->siblings, &directory->variant.directoryVariant.children);
++	ylist_add(&obj->siblings, &directory->variant.directoryVariant.children);
+ 	obj->parent = directory;
+ 
+ 	if (directory == obj->myDev->unlinkedDir
+-	    || directory == obj->myDev->deletedDir) {
++			|| directory == obj->myDev->deletedDir) {
+ 		obj->unlinked = 1;
+ 		obj->myDev->nUnlinkedFiles++;
+ 		obj->renameAllowed = 0;
+ 	}
++
++	yaffs_VerifyDirectory(directory);
++	yaffs_VerifyObjectInDirectory(obj);
+ }
+ 
+-yaffs_Object *yaffs_FindObjectByName(yaffs_Object * directory,
+-				     const YCHAR * name)
++yaffs_Object *yaffs_FindObjectByName(yaffs_Object *directory,
++				     const YCHAR *name)
+ {
+ 	int sum;
+ 
+-	struct list_head *i;
++	struct ylist_head *i;
+ 	YCHAR buffer[YAFFS_MAX_NAME_LENGTH + 1];
+ 
+ 	yaffs_Object *l;
+ 
+-	if (!name) {
++	if (!name)
+ 		return NULL;
+-	}
+ 
+ 	if (!directory) {
+ 		T(YAFFS_TRACE_ALWAYS,
+@@ -6669,6 +6752,7 @@ yaffs_Object *yaffs_FindObjectByName(yaf
+ 		   ("tragedy: yaffs_FindObjectByName: null pointer directory"
+ 		    TENDSTR)));
+ 		YBUG();
++		return NULL;
+ 	}
+ 	if (directory->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 		T(YAFFS_TRACE_ALWAYS,
+@@ -6679,28 +6763,27 @@ yaffs_Object *yaffs_FindObjectByName(yaf
+ 
+ 	sum = yaffs_CalcNameSum(name);
+ 
+-	list_for_each(i, &directory->variant.directoryVariant.children) {
++	ylist_for_each(i, &directory->variant.directoryVariant.children) {
+ 		if (i) {
+-			l = list_entry(i, yaffs_Object, siblings);
++			l = ylist_entry(i, yaffs_Object, siblings);
++
++			if (l->parent != directory)
++				YBUG();
+ 
+ 			yaffs_CheckObjectDetailsLoaded(l);
+ 
+ 			/* Special case for lost-n-found */
+ 			if (l->objectId == YAFFS_OBJECTID_LOSTNFOUND) {
+-				if (yaffs_strcmp(name, YAFFS_LOSTNFOUND_NAME) == 0) {
++				if (yaffs_strcmp(name, YAFFS_LOSTNFOUND_NAME) == 0)
+ 					return l;
+-				}
+-			} else if (yaffs_SumCompare(l->sum, sum) || l->chunkId <= 0)
+-			{
+-				/* LostnFound cunk called Objxxx
++			} else if (yaffs_SumCompare(l->sum, sum) || l->hdrChunk <= 0) {
++				/* LostnFound chunk called Objxxx
+ 				 * Do a real check
+ 				 */
+ 				yaffs_GetObjectName(l, buffer,
+ 						    YAFFS_MAX_NAME_LENGTH);
+-				if (yaffs_strncmp(name, buffer,YAFFS_MAX_NAME_LENGTH) == 0) {
++				if (yaffs_strncmp(name, buffer, YAFFS_MAX_NAME_LENGTH) == 0)
+ 					return l;
+-				}
+-
+ 			}
+ 		}
+ 	}
+@@ -6710,10 +6793,10 @@ yaffs_Object *yaffs_FindObjectByName(yaf
+ 
+ 
+ #if 0
+-int yaffs_ApplyToDirectoryChildren(yaffs_Object * theDir,
+-				   int (*fn) (yaffs_Object *))
++int yaffs_ApplyToDirectoryChildren(yaffs_Object *theDir,
++					int (*fn) (yaffs_Object *))
+ {
+-	struct list_head *i;
++	struct ylist_head *i;
+ 	yaffs_Object *l;
+ 
+ 	if (!theDir) {
+@@ -6722,20 +6805,21 @@ int yaffs_ApplyToDirectoryChildren(yaffs
+ 		   ("tragedy: yaffs_FindObjectByName: null pointer directory"
+ 		    TENDSTR)));
+ 		YBUG();
++		return YAFFS_FAIL;
+ 	}
+ 	if (theDir->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 		T(YAFFS_TRACE_ALWAYS,
+ 		  (TSTR
+ 		   ("tragedy: yaffs_FindObjectByName: non-directory" TENDSTR)));
+ 		YBUG();
++		return YAFFS_FAIL;
+ 	}
+ 
+-	list_for_each(i, &theDir->variant.directoryVariant.children) {
++	ylist_for_each(i, &theDir->variant.directoryVariant.children) {
+ 		if (i) {
+-			l = list_entry(i, yaffs_Object, siblings);
+-			if (l && !fn(l)) {
++			l = ylist_entry(i, yaffs_Object, siblings);
++			if (l && !fn(l))
+ 				return YAFFS_FAIL;
+-			}
+ 		}
+ 	}
+ 
+@@ -6748,7 +6832,7 @@ int yaffs_ApplyToDirectoryChildren(yaffs
+  * actual object.
+  */
+ 
+-yaffs_Object *yaffs_GetEquivalentObject(yaffs_Object * obj)
++yaffs_Object *yaffs_GetEquivalentObject(yaffs_Object *obj)
+ {
+ 	if (obj && obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) {
+ 		/* We want the object id of the equivalent object, not this one */
+@@ -6756,10 +6840,9 @@ yaffs_Object *yaffs_GetEquivalentObject(
+ 		yaffs_CheckObjectDetailsLoaded(obj);
+ 	}
+ 	return obj;
+-
+ }
+ 
+-int yaffs_GetObjectName(yaffs_Object * obj, YCHAR * name, int buffSize)
++int yaffs_GetObjectName(yaffs_Object *obj, YCHAR *name, int buffSize)
+ {
+ 	memset(name, 0, buffSize * sizeof(YCHAR));
+ 
+@@ -6767,18 +6850,26 @@ int yaffs_GetObjectName(yaffs_Object * o
+ 
+ 	if (obj->objectId == YAFFS_OBJECTID_LOSTNFOUND) {
+ 		yaffs_strncpy(name, YAFFS_LOSTNFOUND_NAME, buffSize - 1);
+-	} else if (obj->chunkId <= 0) {
++	} else if (obj->hdrChunk <= 0) {
+ 		YCHAR locName[20];
++		YCHAR numString[20];
++		YCHAR *x = &numString[19];
++		unsigned v = obj->objectId;
++		numString[19] = 0;
++		while (v > 0) {
++			x--;
++			*x = '0' + (v % 10);
++			v /= 10;
++		}
+ 		/* make up a name */
+-		yaffs_sprintf(locName, _Y("%s%d"), YAFFS_LOSTNFOUND_PREFIX,
+-			      obj->objectId);
++		yaffs_strcpy(locName, YAFFS_LOSTNFOUND_PREFIX);
++		yaffs_strcat(locName, x);
+ 		yaffs_strncpy(name, locName, buffSize - 1);
+ 
+ 	}
+ #ifdef CONFIG_YAFFS_SHORT_NAMES_IN_RAM
+-	else if (obj->shortName[0]) {
++	else if (obj->shortName[0])
+ 		yaffs_strcpy(name, obj->shortName);
+-	}
+ #endif
+ 	else {
+ 		int result;
+@@ -6788,9 +6879,9 @@ int yaffs_GetObjectName(yaffs_Object * o
+ 
+ 		memset(buffer, 0, obj->myDev->nDataBytesPerChunk);
+ 
+-		if (obj->chunkId >= 0) {
++		if (obj->hdrChunk > 0) {
+ 			result = yaffs_ReadChunkWithTagsFromNAND(obj->myDev,
+-							obj->chunkId, buffer,
++							obj->hdrChunk, buffer,
+ 							NULL);
+ 		}
+ 		yaffs_strncpy(name, oh->name, buffSize - 1);
+@@ -6801,46 +6892,43 @@ int yaffs_GetObjectName(yaffs_Object * o
+ 	return yaffs_strlen(name);
+ }
+ 
+-int yaffs_GetObjectFileLength(yaffs_Object * obj)
++int yaffs_GetObjectFileLength(yaffs_Object *obj)
+ {
+-
+ 	/* Dereference any hard linking */
+ 	obj = yaffs_GetEquivalentObject(obj);
+ 
+-	if (obj->variantType == YAFFS_OBJECT_TYPE_FILE) {
++	if (obj->variantType == YAFFS_OBJECT_TYPE_FILE)
+ 		return obj->variant.fileVariant.fileSize;
+-	}
+-	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK) {
++	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK)
+ 		return yaffs_strlen(obj->variant.symLinkVariant.alias);
+-	} else {
++	else {
+ 		/* Only a directory should drop through to here */
+ 		return obj->myDev->nDataBytesPerChunk;
+ 	}
+ }
+ 
+-int yaffs_GetObjectLinkCount(yaffs_Object * obj)
++int yaffs_GetObjectLinkCount(yaffs_Object *obj)
+ {
+ 	int count = 0;
+-	struct list_head *i;
++	struct ylist_head *i;
+ 
+-	if (!obj->unlinked) {
+-		count++;	/* the object itself */
+-	}
+-	list_for_each(i, &obj->hardLinks) {
+-		count++;	/* add the hard links; */
+-	}
+-	return count;
++	if (!obj->unlinked)
++		count++;		/* the object itself */
++
++	ylist_for_each(i, &obj->hardLinks)
++		count++;		/* add the hard links; */
+ 
++	return count;
+ }
+ 
+-int yaffs_GetObjectInode(yaffs_Object * obj)
++int yaffs_GetObjectInode(yaffs_Object *obj)
+ {
+ 	obj = yaffs_GetEquivalentObject(obj);
+ 
+ 	return obj->objectId;
+ }
+ 
+-unsigned yaffs_GetObjectType(yaffs_Object * obj)
++unsigned yaffs_GetObjectType(yaffs_Object *obj)
+ {
+ 	obj = yaffs_GetEquivalentObject(obj);
+ 
+@@ -6872,19 +6960,18 @@ unsigned yaffs_GetObjectType(yaffs_Objec
+ 	}
+ }
+ 
+-YCHAR *yaffs_GetSymlinkAlias(yaffs_Object * obj)
++YCHAR *yaffs_GetSymlinkAlias(yaffs_Object *obj)
+ {
+ 	obj = yaffs_GetEquivalentObject(obj);
+-	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK) {
++	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK)
+ 		return yaffs_CloneString(obj->variant.symLinkVariant.alias);
+-	} else {
++	else
+ 		return yaffs_CloneString(_Y(""));
+-	}
+ }
+ 
+ #ifndef CONFIG_YAFFS_WINCE
+ 
+-int yaffs_SetAttributes(yaffs_Object * obj, struct iattr *attr)
++int yaffs_SetAttributes(yaffs_Object *obj, struct iattr *attr)
+ {
+ 	unsigned int valid = attr->ia_valid;
+ 
+@@ -6910,7 +6997,7 @@ int yaffs_SetAttributes(yaffs_Object * o
+ 	return YAFFS_OK;
+ 
+ }
+-int yaffs_GetAttributes(yaffs_Object * obj, struct iattr *attr)
++int yaffs_GetAttributes(yaffs_Object *obj, struct iattr *attr)
+ {
+ 	unsigned int valid = 0;
+ 
+@@ -6934,13 +7021,12 @@ int yaffs_GetAttributes(yaffs_Object * o
+ 	attr->ia_valid = valid;
+ 
+ 	return YAFFS_OK;
+-
+ }
+ 
+ #endif
+ 
+ #if 0
+-int yaffs_DumpObject(yaffs_Object * obj)
++int yaffs_DumpObject(yaffs_Object *obj)
+ {
+ 	YCHAR name[257];
+ 
+@@ -6951,7 +7037,7 @@ int yaffs_DumpObject(yaffs_Object * obj)
+ 	   ("Object %d, inode %d \"%s\"\n dirty %d valid %d serial %d sum %d"
+ 	    " chunk %d type %d size %d\n"
+ 	    TENDSTR), obj->objectId, yaffs_GetObjectInode(obj), name,
+-	   obj->dirty, obj->valid, obj->serial, obj->sum, obj->chunkId,
++	   obj->dirty, obj->valid, obj->serial, obj->sum, obj->hdrChunk,
+ 	   yaffs_GetObjectType(obj), yaffs_GetObjectFileLength(obj)));
+ 
+ 	return YAFFS_OK;
+@@ -6960,7 +7046,7 @@ int yaffs_DumpObject(yaffs_Object * obj)
+ 
+ /*---------------------------- Initialisation code -------------------------------------- */
+ 
+-static int yaffs_CheckDevFunctions(const yaffs_Device * dev)
++static int yaffs_CheckDevFunctions(const yaffs_Device *dev)
+ {
+ 
+ 	/* Common functions, gotta have */
+@@ -7011,7 +7097,7 @@ static int yaffs_CreateInitialDirectorie
+ 	    yaffs_CreateFakeDirectory(dev, YAFFS_OBJECTID_LOSTNFOUND,
+ 				      YAFFS_LOSTNFOUND_MODE | S_IFDIR);
+ 
+-	if(dev->lostNFoundDir && dev->rootDir && dev->unlinkedDir && dev->deletedDir){
++	if (dev->lostNFoundDir && dev->rootDir && dev->unlinkedDir && dev->deletedDir) {
+ 		yaffs_AddObjectToDirectory(dev->rootDir, dev->lostNFoundDir);
+ 		return YAFFS_OK;
+ 	}
+@@ -7019,7 +7105,7 @@ static int yaffs_CreateInitialDirectorie
+ 	return YAFFS_FAIL;
+ }
+ 
+-int yaffs_GutsInitialise(yaffs_Device * dev)
++int yaffs_GutsInitialise(yaffs_Device *dev)
+ {
+ 	int init_failed = 0;
+ 	unsigned x;
+@@ -7040,6 +7126,8 @@ int yaffs_GutsInitialise(yaffs_Device *
+ 	dev->chunkOffset = 0;
+ 	dev->nFreeChunks = 0;
+ 
++	dev->gcBlock = -1;
++
+ 	if (dev->startBlock == 0) {
+ 		dev->internalStartBlock = dev->startBlock + 1;
+ 		dev->internalEndBlock = dev->endBlock + 1;
+@@ -7049,18 +7137,18 @@ int yaffs_GutsInitialise(yaffs_Device *
+ 
+ 	/* Check geometry parameters. */
+ 
+-	if ((dev->isYaffs2 && dev->nDataBytesPerChunk < 1024) ||
+-	    (!dev->isYaffs2 && dev->nDataBytesPerChunk != 512) ||
++	if ((!dev->inbandTags && dev->isYaffs2 && dev->totalBytesPerChunk < 1024) ||
++	    (!dev->isYaffs2 && dev->totalBytesPerChunk < 512) ||
++	    (dev->inbandTags && !dev->isYaffs2) ||
+ 	     dev->nChunksPerBlock < 2 ||
+ 	     dev->nReservedBlocks < 2 ||
+ 	     dev->internalStartBlock <= 0 ||
+ 	     dev->internalEndBlock <= 0 ||
+-	     dev->internalEndBlock <= (dev->internalStartBlock + dev->nReservedBlocks + 2)	// otherwise it is too small
+-	    ) {
++	     dev->internalEndBlock <= (dev->internalStartBlock + dev->nReservedBlocks + 2)) {	/* otherwise it is too small */
+ 		T(YAFFS_TRACE_ALWAYS,
+ 		  (TSTR
+-		   ("yaffs: NAND geometry problems: chunk size %d, type is yaffs%s "
+-		    TENDSTR), dev->nDataBytesPerChunk, dev->isYaffs2 ? "2" : ""));
++		   ("yaffs: NAND geometry problems: chunk size %d, type is yaffs%s, inbandTags %d "
++		    TENDSTR), dev->totalBytesPerChunk, dev->isYaffs2 ? "2" : "", dev->inbandTags));
+ 		return YAFFS_FAIL;
+ 	}
+ 
+@@ -7070,6 +7158,12 @@ int yaffs_GutsInitialise(yaffs_Device *
+ 		return YAFFS_FAIL;
+ 	}
+ 
++	/* Sort out space for inband tags, if required */
++	if (dev->inbandTags)
++		dev->nDataBytesPerChunk = dev->totalBytesPerChunk - sizeof(yaffs_PackedTags2TagsPart);
++	else
++		dev->nDataBytesPerChunk = dev->totalBytesPerChunk;
++
+ 	/* Got the right mix of functions? */
+ 	if (!yaffs_CheckDevFunctions(dev)) {
+ 		/* Function missing */
+@@ -7097,31 +7191,18 @@ int yaffs_GutsInitialise(yaffs_Device *
+ 
+ 	dev->isMounted = 1;
+ 
+-
+-
+ 	/* OK now calculate a few things for the device */
+ 
+ 	/*
+ 	 *  Calculate all the chunk size manipulation numbers:
+ 	 */
+-	 /* Start off assuming it is a power of 2 */
+-	 dev->chunkShift = ShiftDiv(dev->nDataBytesPerChunk);
+-	 dev->chunkMask = (1<<dev->chunkShift) - 1;
+-
+-	 if(dev->nDataBytesPerChunk == (dev->chunkMask + 1)){
+-	 	/* Yes it is a power of 2, disable crumbs */
+-		dev->crumbMask = 0;
+-		dev->crumbShift = 0;
+-		dev->crumbsPerChunk = 0;
+-	 } else {
+-	 	/* Not a power of 2, use crumbs instead */
+-		dev->crumbShift = ShiftDiv(sizeof(yaffs_PackedTags2TagsPart));
+-		dev->crumbMask = (1<<dev->crumbShift)-1;
+-		dev->crumbsPerChunk = dev->nDataBytesPerChunk/(1 << dev->crumbShift);
+-		dev->chunkShift = 0;
+-		dev->chunkMask = 0;
+-	}
+-
++	x = dev->nDataBytesPerChunk;
++	/* We always use dev->chunkShift and dev->chunkDiv */
++	dev->chunkShift = Shifts(x);
++	x >>= dev->chunkShift;
++	dev->chunkDiv = x;
++	/* We only use chunk mask if chunkDiv is 1 */
++	dev->chunkMask = (1<<dev->chunkShift) - 1;
+ 
+ 	/*
+ 	 * Calculate chunkGroupBits.
+@@ -7133,16 +7214,15 @@ int yaffs_GutsInitialise(yaffs_Device *
+ 	bits = ShiftsGE(x);
+ 
+ 	/* Set up tnode width if wide tnodes are enabled. */
+-	if(!dev->wideTnodesDisabled){
++	if (!dev->wideTnodesDisabled) {
+ 		/* bits must be even so that we end up with 32-bit words */
+-		if(bits & 1)
++		if (bits & 1)
+ 			bits++;
+-		if(bits < 16)
++		if (bits < 16)
+ 			dev->tnodeWidth = 16;
+ 		else
+ 			dev->tnodeWidth = bits;
+-	}
+-	else
++	} else
+ 		dev->tnodeWidth = 16;
+ 
+ 	dev->tnodeMask = (1<<dev->tnodeWidth)-1;
+@@ -7193,7 +7273,7 @@ int yaffs_GutsInitialise(yaffs_Device *
+ 	dev->hasPendingPrioritisedGCs = 1; /* Assume the worst for now, will get fixed on first GC */
+ 
+ 	/* Initialise temporary buffers and caches. */
+-	if(!yaffs_InitialiseTempBuffers(dev))
++	if (!yaffs_InitialiseTempBuffers(dev))
+ 		init_failed = 1;
+ 
+ 	dev->srCache = NULL;
+@@ -7203,25 +7283,26 @@ int yaffs_GutsInitialise(yaffs_Device *
+ 	if (!init_failed &&
+ 	    dev->nShortOpCaches > 0) {
+ 		int i;
+-		__u8 *buf;
++		void *buf;
+ 		int srCacheBytes = dev->nShortOpCaches * sizeof(yaffs_ChunkCache);
+ 
+-		if (dev->nShortOpCaches > YAFFS_MAX_SHORT_OP_CACHES) {
++		if (dev->nShortOpCaches > YAFFS_MAX_SHORT_OP_CACHES)
+ 			dev->nShortOpCaches = YAFFS_MAX_SHORT_OP_CACHES;
+-		}
+ 
+-		buf = dev->srCache =  YMALLOC(srCacheBytes);
++		dev->srCache =  YMALLOC(srCacheBytes);
+ 
+-		if(dev->srCache)
+-			memset(dev->srCache,0,srCacheBytes);
++		buf = (__u8 *) dev->srCache;
++
++		if (dev->srCache)
++			memset(dev->srCache, 0, srCacheBytes);
+ 
+ 		for (i = 0; i < dev->nShortOpCaches && buf; i++) {
+ 			dev->srCache[i].object = NULL;
+ 			dev->srCache[i].lastUse = 0;
+ 			dev->srCache[i].dirty = 0;
+-			dev->srCache[i].data = buf = YMALLOC_DMA(dev->nDataBytesPerChunk);
++			dev->srCache[i].data = buf = YMALLOC_DMA(dev->totalBytesPerChunk);
+ 		}
+-		if(!buf)
++		if (!buf)
+ 			init_failed = 1;
+ 
+ 		dev->srLastUse = 0;
+@@ -7229,29 +7310,30 @@ int yaffs_GutsInitialise(yaffs_Device *
+ 
+ 	dev->cacheHits = 0;
+ 
+-	if(!init_failed){
++	if (!init_failed) {
+ 		dev->gcCleanupList = YMALLOC(dev->nChunksPerBlock * sizeof(__u32));
+-		if(!dev->gcCleanupList)
++		if (!dev->gcCleanupList)
+ 			init_failed = 1;
+ 	}
+ 
+-	if (dev->isYaffs2) {
++	if (dev->isYaffs2)
+ 		dev->useHeaderFileSize = 1;
+-	}
+-	if(!init_failed && !yaffs_InitialiseBlocks(dev))
++
++	if (!init_failed && !yaffs_InitialiseBlocks(dev))
+ 		init_failed = 1;
+ 
+ 	yaffs_InitialiseTnodes(dev);
+ 	yaffs_InitialiseObjects(dev);
+ 
+-	if(!init_failed && !yaffs_CreateInitialDirectories(dev))
++	if (!init_failed && !yaffs_CreateInitialDirectories(dev))
+ 		init_failed = 1;
+ 
+ 
+-	if(!init_failed){
++	if (!init_failed) {
+ 		/* Now scan the flash. */
+ 		if (dev->isYaffs2) {
+-			if(yaffs_CheckpointRestore(dev)) {
++			if (yaffs_CheckpointRestore(dev)) {
++				yaffs_CheckObjectDetailsLoaded(dev->rootDir);
+ 				T(YAFFS_TRACE_ALWAYS,
+ 				  (TSTR("yaffs: restored from checkpoint" TENDSTR)));
+ 			} else {
+@@ -7273,24 +7355,25 @@ int yaffs_GutsInitialise(yaffs_Device *
+ 				dev->nBackgroundDeletions = 0;
+ 				dev->oldestDirtySequence = 0;
+ 
+-				if(!init_failed && !yaffs_InitialiseBlocks(dev))
++				if (!init_failed && !yaffs_InitialiseBlocks(dev))
+ 					init_failed = 1;
+ 
+ 				yaffs_InitialiseTnodes(dev);
+ 				yaffs_InitialiseObjects(dev);
+ 
+-				if(!init_failed && !yaffs_CreateInitialDirectories(dev))
++				if (!init_failed && !yaffs_CreateInitialDirectories(dev))
+ 					init_failed = 1;
+ 
+-				if(!init_failed && !yaffs_ScanBackwards(dev))
++				if (!init_failed && !yaffs_ScanBackwards(dev))
+ 					init_failed = 1;
+ 			}
+-		}else
+-			if(!yaffs_Scan(dev))
++		} else if (!yaffs_Scan(dev))
+ 				init_failed = 1;
++
++		yaffs_StripDeletedObjects(dev);
+ 	}
+ 
+-	if(init_failed){
++	if (init_failed) {
+ 		/* Clean up the mess */
+ 		T(YAFFS_TRACE_TRACING,
+ 		  (TSTR("yaffs: yaffs_GutsInitialise() aborted.\n" TENDSTR)));
+@@ -7318,7 +7401,7 @@ int yaffs_GutsInitialise(yaffs_Device *
+ 
+ }
+ 
+-void yaffs_Deinitialise(yaffs_Device * dev)
++void yaffs_Deinitialise(yaffs_Device *dev)
+ {
+ 	if (dev->isMounted) {
+ 		int i;
+@@ -7330,7 +7413,7 @@ void yaffs_Deinitialise(yaffs_Device * d
+ 		    dev->srCache) {
+ 
+ 			for (i = 0; i < dev->nShortOpCaches; i++) {
+-				if(dev->srCache[i].data)
++				if (dev->srCache[i].data)
+ 					YFREE(dev->srCache[i].data);
+ 				dev->srCache[i].data = NULL;
+ 			}
+@@ -7341,16 +7424,17 @@ void yaffs_Deinitialise(yaffs_Device * d
+ 
+ 		YFREE(dev->gcCleanupList);
+ 
+-		for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
++		for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++)
+ 			YFREE(dev->tempBuffer[i].buffer);
+-		}
+ 
+ 		dev->isMounted = 0;
+-	}
+ 
++		if (dev->deinitialiseNAND)
++			dev->deinitialiseNAND(dev);
++	}
+ }
+ 
+-static int yaffs_CountFreeChunks(yaffs_Device * dev)
++static int yaffs_CountFreeChunks(yaffs_Device *dev)
+ {
+ 	int nFree;
+ 	int b;
+@@ -7358,7 +7442,7 @@ static int yaffs_CountFreeChunks(yaffs_D
+ 	yaffs_BlockInfo *blk;
+ 
+ 	for (nFree = 0, b = dev->internalStartBlock; b <= dev->internalEndBlock;
+-	     b++) {
++			b++) {
+ 		blk = yaffs_GetBlockInfo(dev, b);
+ 
+ 		switch (blk->blockState) {
+@@ -7373,19 +7457,19 @@ static int yaffs_CountFreeChunks(yaffs_D
+ 		default:
+ 			break;
+ 		}
+-
+ 	}
+ 
+ 	return nFree;
+ }
+ 
+-int yaffs_GetNumberOfFreeChunks(yaffs_Device * dev)
++int yaffs_GetNumberOfFreeChunks(yaffs_Device *dev)
+ {
+ 	/* This is what we report to the outside world */
+ 
+ 	int nFree;
+ 	int nDirtyCacheChunks;
+ 	int blocksForCheckpoint;
++	int i;
+ 
+ #if 1
+ 	nFree = dev->nFreeChunks;
+@@ -7397,12 +7481,9 @@ int yaffs_GetNumberOfFreeChunks(yaffs_De
+ 
+ 	/* Now count the number of dirty chunks in the cache and subtract those */
+ 
+-	{
+-		int i;
+-		for (nDirtyCacheChunks = 0, i = 0; i < dev->nShortOpCaches; i++) {
+-			if (dev->srCache[i].dirty)
+-				nDirtyCacheChunks++;
+-		}
++	for (nDirtyCacheChunks = 0, i = 0; i < dev->nShortOpCaches; i++) {
++		if (dev->srCache[i].dirty)
++			nDirtyCacheChunks++;
+ 	}
+ 
+ 	nFree -= nDirtyCacheChunks;
+@@ -7410,8 +7491,8 @@ int yaffs_GetNumberOfFreeChunks(yaffs_De
+ 	nFree -= ((dev->nReservedBlocks + 1) * dev->nChunksPerBlock);
+ 
+ 	/* Now we figure out how much to reserve for the checkpoint and report that... */
+-	blocksForCheckpoint = dev->nCheckpointReservedBlocks - dev->blocksInCheckpoint;
+-	if(blocksForCheckpoint < 0)
++	blocksForCheckpoint = yaffs_CalcCheckpointBlocksRequired(dev) - dev->blocksInCheckpoint;
++	if (blocksForCheckpoint < 0)
+ 		blocksForCheckpoint = 0;
+ 
+ 	nFree -= (blocksForCheckpoint * dev->nChunksPerBlock);
+@@ -7425,12 +7506,12 @@ int yaffs_GetNumberOfFreeChunks(yaffs_De
+ 
+ static int yaffs_freeVerificationFailures;
+ 
+-static void yaffs_VerifyFreeChunks(yaffs_Device * dev)
++static void yaffs_VerifyFreeChunks(yaffs_Device *dev)
+ {
+ 	int counted;
+ 	int difference;
+ 
+-	if(yaffs_SkipVerification(dev))
++	if (yaffs_SkipVerification(dev))
+ 		return;
+ 
+ 	counted = yaffs_CountFreeChunks(dev);
+@@ -7447,23 +7528,25 @@ static void yaffs_VerifyFreeChunks(yaffs
+ 
+ /*---------------------------------------- YAFFS test code ----------------------*/
+ 
+-#define yaffs_CheckStruct(structure,syze, name) \
+-           if(sizeof(structure) != syze) \
+-	       { \
+-	         T(YAFFS_TRACE_ALWAYS,(TSTR("%s should be %d but is %d\n" TENDSTR),\
+-		 name,syze,sizeof(structure))); \
+-	         return YAFFS_FAIL; \
+-		}
++#define yaffs_CheckStruct(structure, syze, name) \
++	do { \
++		if (sizeof(structure) != syze) { \
++			T(YAFFS_TRACE_ALWAYS, (TSTR("%s should be %d but is %d\n" TENDSTR),\
++				name, syze, sizeof(structure))); \
++			return YAFFS_FAIL; \
++		} \
++	} while (0)
+ 
+ static int yaffs_CheckStructures(void)
+ {
+-/*      yaffs_CheckStruct(yaffs_Tags,8,"yaffs_Tags") */
+-/*      yaffs_CheckStruct(yaffs_TagsUnion,8,"yaffs_TagsUnion") */
+-/*      yaffs_CheckStruct(yaffs_Spare,16,"yaffs_Spare") */
++/*      yaffs_CheckStruct(yaffs_Tags,8,"yaffs_Tags"); */
++/*      yaffs_CheckStruct(yaffs_TagsUnion,8,"yaffs_TagsUnion"); */
++/*      yaffs_CheckStruct(yaffs_Spare,16,"yaffs_Spare"); */
+ #ifndef CONFIG_YAFFS_TNODE_LIST_DEBUG
+-	yaffs_CheckStruct(yaffs_Tnode, 2 * YAFFS_NTNODES_LEVEL0, "yaffs_Tnode")
++	yaffs_CheckStruct(yaffs_Tnode, 2 * YAFFS_NTNODES_LEVEL0, "yaffs_Tnode");
+ #endif
+-	    yaffs_CheckStruct(yaffs_ObjectHeader, 512, "yaffs_ObjectHeader")
+-
+-	    return YAFFS_OK;
++#ifndef CONFIG_YAFFS_WINCE
++	yaffs_CheckStruct(yaffs_ObjectHeader, 512, "yaffs_ObjectHeader");
++#endif
++	return YAFFS_OK;
+ }
+--- a/fs/yaffs2/yaffs_guts.h
++++ b/fs/yaffs2/yaffs_guts.h
+@@ -90,7 +90,7 @@
+ 
+ #define YAFFS_MAX_SHORT_OP_CACHES	20
+ 
+-#define YAFFS_N_TEMP_BUFFERS		4
++#define YAFFS_N_TEMP_BUFFERS		6
+ 
+ /* We limit the number attempts at sucessfully saving a chunk of data.
+  * Small-page devices have 32 pages per block; large-page devices have 64.
+@@ -108,6 +108,9 @@
+ #define YAFFS_LOWEST_SEQUENCE_NUMBER	0x00001000
+ #define YAFFS_HIGHEST_SEQUENCE_NUMBER	0xEFFFFF00
+ 
++/* Special sequence number for bad block that failed to be marked bad */
++#define YAFFS_SEQUENCE_BAD_BLOCK	0xFFFF0000
++
+ /* ChunkCache is used for short read/write operations.*/
+ typedef struct {
+ 	struct yaffs_ObjectStruct *object;
+@@ -134,11 +137,10 @@ typedef struct {
+ typedef struct {
+ 	unsigned chunkId:20;
+ 	unsigned serialNumber:2;
+-	unsigned byteCount:10;
++	unsigned byteCountLSB:10;
+ 	unsigned objectId:18;
+ 	unsigned ecc:12;
+-	unsigned unusedStuff:2;
+-
++	unsigned byteCountMSB:2;
+ } yaffs_Tags;
+ 
+ typedef union {
+@@ -277,13 +279,13 @@ typedef struct {
+ 
+ 	int softDeletions:10;	/* number of soft deleted pages */
+ 	int pagesInUse:10;	/* number of pages in use */
+-	yaffs_BlockState blockState:4;	/* One of the above block states */
++	unsigned blockState:4;	/* One of the above block states. NB use unsigned because enum is sometimes an int */
+ 	__u32 needsRetiring:1;	/* Data has failed on this block, need to get valid data off */
+-                        	/* and retire the block. */
+-	__u32 skipErasedCheck: 1; /* If this is set we can skip the erased check on this block */
+-	__u32 gcPrioritise: 1; 	/* An ECC check or blank check has failed on this block.
++				/* and retire the block. */
++	__u32 skipErasedCheck:1; /* If this is set we can skip the erased check on this block */
++	__u32 gcPrioritise:1; 	/* An ECC check or blank check has failed on this block.
+ 				   It should be prioritised for GC */
+-        __u32 chunkErrorStrikes:3; /* How many times we've had ecc etc failures on this block and tried to reuse it */
++	__u32 chunkErrorStrikes:3; /* How many times we've had ecc etc failures on this block and tried to reuse it */
+ 
+ #ifdef CONFIG_YAFFS_YAFFS2
+ 	__u32 hasShrinkHeader:1; /* This block has at least one shrink object header */
+@@ -300,11 +302,11 @@ typedef struct {
+ 
+ 	/* Apply to everything  */
+ 	int parentObjectId;
+-	__u16 sum__NoLongerUsed;	/* checksum of name. No longer used */
++	__u16 sum__NoLongerUsed;        /* checksum of name. No longer used */
+ 	YCHAR name[YAFFS_MAX_NAME_LENGTH + 1];
+ 
+-	/* Thes following apply to directories, files, symlinks - not hard links */
+-	__u32 yst_mode;		/* protection */
++	/* The following apply to directories, files, symlinks - not hard links */
++	__u32 yst_mode;         /* protection */
+ 
+ #ifdef CONFIG_YAFFS_WINCE
+ 	__u32 notForWinCE[5];
+@@ -331,11 +333,14 @@ typedef struct {
+ 	__u32 win_ctime[2];
+ 	__u32 win_atime[2];
+ 	__u32 win_mtime[2];
+-	__u32 roomToGrow[4];
+ #else
+-	__u32 roomToGrow[10];
++	__u32 roomToGrow[6];
++
+ #endif
++	__u32 inbandShadowsObject;
++	__u32 inbandIsShrink;
+ 
++	__u32 reservedSpace[2];
+ 	int shadowsObject;	/* This object header shadows the specified object if > 0 */
+ 
+ 	/* isShrink applies to object headers written when we shrink the file (ie resize) */
+@@ -381,7 +386,7 @@ typedef struct {
+ } yaffs_FileStructure;
+ 
+ typedef struct {
+-	struct list_head children;	/* list of child links */
++	struct ylist_head children;     /* list of child links */
+ } yaffs_DirectoryStructure;
+ 
+ typedef struct {
+@@ -418,23 +423,24 @@ struct yaffs_ObjectStruct {
+ 				 * still in the inode cache. Free of object is defered.
+ 				 * until the inode is released.
+ 				 */
++	__u8 beingCreated:1;	/* This object is still being created so skip some checks. */
+ 
+ 	__u8 serial;		/* serial number of chunk in NAND. Cached here */
+ 	__u16 sum;		/* sum of the name to speed searching */
+ 
+-	struct yaffs_DeviceStruct *myDev;	/* The device I'm on */
++	struct yaffs_DeviceStruct *myDev;       /* The device I'm on */
+ 
+-	struct list_head hashLink;	/* list of objects in this hash bucket */
++	struct ylist_head hashLink;     /* list of objects in this hash bucket */
+ 
+-	struct list_head hardLinks;	/* all the equivalent hard linked objects */
++	struct ylist_head hardLinks;    /* all the equivalent hard linked objects */
+ 
+ 	/* directory structure stuff */
+ 	/* also used for linking up the free list */
+ 	struct yaffs_ObjectStruct *parent;
+-	struct list_head siblings;
++	struct ylist_head siblings;
+ 
+ 	/* Where's my object header in NAND? */
+-	int chunkId;
++	int hdrChunk;
+ 
+ 	int nDataChunks;	/* Number of data chunks attached to the file. */
+ 
+@@ -485,7 +491,7 @@ struct yaffs_ObjectList_struct {
+ typedef struct yaffs_ObjectList_struct yaffs_ObjectList;
+ 
+ typedef struct {
+-	struct list_head list;
++	struct ylist_head list;
+ 	int count;
+ } yaffs_ObjectBucket;
+ 
+@@ -495,11 +501,10 @@ typedef struct {
+  */
+ 
+ typedef struct {
+-        int structType;
++	int structType;
+ 	__u32 objectId;
+ 	__u32 parentId;
+-	int chunkId;
+-
++	int hdrChunk;
+ 	yaffs_ObjectType variantType:3;
+ 	__u8 deleted:1;
+ 	__u8 softDeleted:1;
+@@ -511,8 +516,7 @@ typedef struct {
+ 
+ 	int nDataChunks;
+ 	__u32 fileSizeOrEquivalentObjectId;
+-
+-}yaffs_CheckpointObject;
++} yaffs_CheckpointObject;
+ 
+ /*--------------------- Temporary buffers ----------------
+  *
+@@ -528,13 +532,13 @@ typedef struct {
+ /*----------------- Device ---------------------------------*/
+ 
+ struct yaffs_DeviceStruct {
+-	struct list_head devList;
++	struct ylist_head devList;
+ 	const char *name;
+ 
+ 	/* Entry parameters set up way early. Yaffs sets up the rest.*/
+ 	int nDataBytesPerChunk;	/* Should be a power of 2 >= 512 */
+ 	int nChunksPerBlock;	/* does not need to be a power of 2 */
+-	int nBytesPerSpare;	/* spare area size */
++	int spareBytesPerChunk;	/* spare area size */
+ 	int startBlock;		/* Start block we're allowed to use */
+ 	int endBlock;		/* End block we're allowed to use */
+ 	int nReservedBlocks;	/* We want this tuneable so that we can reduce */
+@@ -544,9 +548,7 @@ struct yaffs_DeviceStruct {
+ 	/* Stuff used by the shared space checkpointing mechanism */
+ 	/* If this value is zero, then this mechanism is disabled */
+ 
+-	int nCheckpointReservedBlocks; /* Blocks to reserve for checkpoint data */
+-
+-
++/*	int nCheckpointReservedBlocks; */ /* Blocks to reserve for checkpoint data */
+ 
+ 
+ 	int nShortOpCaches;	/* If <= 0, then short op caching is disabled, else
+@@ -560,30 +562,31 @@ struct yaffs_DeviceStruct {
+ 	void *genericDevice;	/* Pointer to device context
+ 				 * On an mtd this holds the mtd pointer.
+ 				 */
+-        void *superBlock;
++	void *superBlock;
+ 
+ 	/* NAND access functions (Must be set before calling YAFFS)*/
+ 
+-	int (*writeChunkToNAND) (struct yaffs_DeviceStruct * dev,
+-				 int chunkInNAND, const __u8 * data,
+-				 const yaffs_Spare * spare);
+-	int (*readChunkFromNAND) (struct yaffs_DeviceStruct * dev,
+-				  int chunkInNAND, __u8 * data,
+-				  yaffs_Spare * spare);
+-	int (*eraseBlockInNAND) (struct yaffs_DeviceStruct * dev,
+-				 int blockInNAND);
+-	int (*initialiseNAND) (struct yaffs_DeviceStruct * dev);
++	int (*writeChunkToNAND) (struct yaffs_DeviceStruct *dev,
++					int chunkInNAND, const __u8 *data,
++					const yaffs_Spare *spare);
++	int (*readChunkFromNAND) (struct yaffs_DeviceStruct *dev,
++					int chunkInNAND, __u8 *data,
++					yaffs_Spare *spare);
++	int (*eraseBlockInNAND) (struct yaffs_DeviceStruct *dev,
++					int blockInNAND);
++	int (*initialiseNAND) (struct yaffs_DeviceStruct *dev);
++	int (*deinitialiseNAND) (struct yaffs_DeviceStruct *dev);
+ 
+ #ifdef CONFIG_YAFFS_YAFFS2
+-	int (*writeChunkWithTagsToNAND) (struct yaffs_DeviceStruct * dev,
+-					 int chunkInNAND, const __u8 * data,
+-					 const yaffs_ExtendedTags * tags);
+-	int (*readChunkWithTagsFromNAND) (struct yaffs_DeviceStruct * dev,
+-					  int chunkInNAND, __u8 * data,
+-					  yaffs_ExtendedTags * tags);
+-	int (*markNANDBlockBad) (struct yaffs_DeviceStruct * dev, int blockNo);
+-	int (*queryNANDBlock) (struct yaffs_DeviceStruct * dev, int blockNo,
+-			       yaffs_BlockState * state, int *sequenceNumber);
++	int (*writeChunkWithTagsToNAND) (struct yaffs_DeviceStruct *dev,
++					 int chunkInNAND, const __u8 *data,
++					 const yaffs_ExtendedTags *tags);
++	int (*readChunkWithTagsFromNAND) (struct yaffs_DeviceStruct *dev,
++					  int chunkInNAND, __u8 *data,
++					  yaffs_ExtendedTags *tags);
++	int (*markNANDBlockBad) (struct yaffs_DeviceStruct *dev, int blockNo);
++	int (*queryNANDBlock) (struct yaffs_DeviceStruct *dev, int blockNo,
++			       yaffs_BlockState *state, __u32 *sequenceNumber);
+ #endif
+ 
+ 	int isYaffs2;
+@@ -595,10 +598,12 @@ struct yaffs_DeviceStruct {
+ 	void (*removeObjectCallback)(struct yaffs_ObjectStruct *obj);
+ 
+ 	/* Callback to mark the superblock dirsty */
+-	void (*markSuperBlockDirty)(void * superblock);
++	void (*markSuperBlockDirty)(void *superblock);
+ 
+ 	int wideTnodesDisabled; /* Set to disable wide tnodes */
+ 
++	YCHAR *pathDividers;	/* String of legal path dividers */
++
+ 
+ 	/* End of stuff that must be set before initialisation. */
+ 
+@@ -615,16 +620,14 @@ struct yaffs_DeviceStruct {
+ 	__u32 tnodeWidth;
+ 	__u32 tnodeMask;
+ 
+-	/* Stuff to support various file offses to chunk/offset translations */
+-	/* "Crumbs" for nDataBytesPerChunk not being a power of 2 */
+-	__u32 crumbMask;
+-	__u32 crumbShift;
+-	__u32 crumbsPerChunk;
+-
+-	/* Straight shifting for nDataBytesPerChunk being a power of 2 */
+-	__u32 chunkShift;
+-	__u32 chunkMask;
+-
++	/* Stuff for figuring out file offset to chunk conversions */
++	__u32 chunkShift; /* Shift value */
++	__u32 chunkDiv;   /* Divisor after shifting: 1 for power-of-2 sizes */
++	__u32 chunkMask;  /* Mask to use for power-of-2 case */
++
++	/* Stuff to handle inband tags */
++	int inbandTags;
++	__u32 totalBytesPerChunk;
+ 
+ #ifdef __KERNEL__
+ 
+@@ -633,7 +636,7 @@ struct yaffs_DeviceStruct {
+ 	__u8 *spareBuffer;	/* For mtdif2 use. Don't know the size of the buffer
+ 				 * at compile time so we have to allocate it.
+ 				 */
+-	void (*putSuperFunc) (struct super_block * sb);
++	void (*putSuperFunc) (struct super_block *sb);
+ #endif
+ 
+ 	int isMounted;
+@@ -663,6 +666,8 @@ struct yaffs_DeviceStruct {
+ 	__u32 checkpointSum;
+ 	__u32 checkpointXor;
+ 
++	int nCheckpointBlocksRequired; /* Number of blocks needed to store current checkpoint set */
++
+ 	/* Block Info */
+ 	yaffs_BlockInfo *blockInfo;
+ 	__u8 *chunkBits;	/* bitmap of chunks in use */
+@@ -684,11 +689,15 @@ struct yaffs_DeviceStruct {
+ 	yaffs_TnodeList *allocatedTnodeList;
+ 
+ 	int isDoingGC;
++	int gcBlock;
++	int gcChunk;
+ 
+ 	int nObjectsCreated;
+ 	yaffs_Object *freeObjects;
+ 	int nFreeObjects;
+ 
++	int nHardLinks;
++
+ 	yaffs_ObjectList *allocatedObjectList;
+ 
+ 	yaffs_ObjectBucket objectBucket[YAFFS_NOBJECT_BUCKETS];
+@@ -745,8 +754,10 @@ struct yaffs_DeviceStruct {
+ 	int nBackgroundDeletions;	/* Count of background deletions. */
+ 
+ 
++	/* Temporary buffer management */
+ 	yaffs_TempBuffer tempBuffer[YAFFS_N_TEMP_BUFFERS];
+ 	int maxTemp;
++	int tempInUse;
+ 	int unmanagedTempAllocations;
+ 	int unmanagedTempDeallocations;
+ 
+@@ -758,9 +769,9 @@ struct yaffs_DeviceStruct {
+ 
+ typedef struct yaffs_DeviceStruct yaffs_Device;
+ 
+-/* The static layout of bllock usage etc is stored in the super block header */
++/* The static layout of block usage etc is stored in the super block header */
+ typedef struct {
+-        int StructType;
++	int StructType;
+ 	int version;
+ 	int checkpointStartBlock;
+ 	int checkpointEndBlock;
+@@ -773,7 +784,7 @@ typedef struct {
+  * must be preserved over unmount/mount cycles.
+  */
+ typedef struct {
+-        int structType;
++	int structType;
+ 	int nErasedBlocks;
+ 	int allocationBlock;	/* Current block being allocated off */
+ 	__u32 allocationPage;
+@@ -791,57 +802,45 @@ typedef struct {
+ 
+ 
+ typedef struct {
+-    int structType;
+-    __u32 magic;
+-    __u32 version;
+-    __u32 head;
++	int structType;
++	__u32 magic;
++	__u32 version;
++	__u32 head;
+ } yaffs_CheckpointValidity;
+ 
+-/* Function to manipulate block info */
+-static Y_INLINE yaffs_BlockInfo *yaffs_GetBlockInfo(yaffs_Device * dev, int blk)
+-{
+-	if (blk < dev->internalStartBlock || blk > dev->internalEndBlock) {
+-		T(YAFFS_TRACE_ERROR,
+-		  (TSTR
+-		   ("**>> yaffs: getBlockInfo block %d is not valid" TENDSTR),
+-		   blk));
+-		YBUG();
+-	}
+-	return &dev->blockInfo[blk - dev->internalStartBlock];
+-}
+ 
+ /*----------------------- YAFFS Functions -----------------------*/
+ 
+-int yaffs_GutsInitialise(yaffs_Device * dev);
+-void yaffs_Deinitialise(yaffs_Device * dev);
++int yaffs_GutsInitialise(yaffs_Device *dev);
++void yaffs_Deinitialise(yaffs_Device *dev);
+ 
+-int yaffs_GetNumberOfFreeChunks(yaffs_Device * dev);
++int yaffs_GetNumberOfFreeChunks(yaffs_Device *dev);
+ 
+-int yaffs_RenameObject(yaffs_Object * oldDir, const YCHAR * oldName,
+-		       yaffs_Object * newDir, const YCHAR * newName);
++int yaffs_RenameObject(yaffs_Object *oldDir, const YCHAR *oldName,
++		       yaffs_Object *newDir, const YCHAR *newName);
+ 
+-int yaffs_Unlink(yaffs_Object * dir, const YCHAR * name);
+-int yaffs_DeleteFile(yaffs_Object * obj);
++int yaffs_Unlink(yaffs_Object *dir, const YCHAR *name);
++int yaffs_DeleteObject(yaffs_Object *obj);
+ 
+-int yaffs_GetObjectName(yaffs_Object * obj, YCHAR * name, int buffSize);
+-int yaffs_GetObjectFileLength(yaffs_Object * obj);
+-int yaffs_GetObjectInode(yaffs_Object * obj);
+-unsigned yaffs_GetObjectType(yaffs_Object * obj);
+-int yaffs_GetObjectLinkCount(yaffs_Object * obj);
++int yaffs_GetObjectName(yaffs_Object *obj, YCHAR *name, int buffSize);
++int yaffs_GetObjectFileLength(yaffs_Object *obj);
++int yaffs_GetObjectInode(yaffs_Object *obj);
++unsigned yaffs_GetObjectType(yaffs_Object *obj);
++int yaffs_GetObjectLinkCount(yaffs_Object *obj);
+ 
+-int yaffs_SetAttributes(yaffs_Object * obj, struct iattr *attr);
+-int yaffs_GetAttributes(yaffs_Object * obj, struct iattr *attr);
++int yaffs_SetAttributes(yaffs_Object *obj, struct iattr *attr);
++int yaffs_GetAttributes(yaffs_Object *obj, struct iattr *attr);
+ 
+ /* File operations */
+-int yaffs_ReadDataFromFile(yaffs_Object * obj, __u8 * buffer, loff_t offset,
+-			   int nBytes);
+-int yaffs_WriteDataToFile(yaffs_Object * obj, const __u8 * buffer, loff_t offset,
+-			  int nBytes, int writeThrough);
+-int yaffs_ResizeFile(yaffs_Object * obj, loff_t newSize);
+-
+-yaffs_Object *yaffs_MknodFile(yaffs_Object * parent, const YCHAR * name,
+-			      __u32 mode, __u32 uid, __u32 gid);
+-int yaffs_FlushFile(yaffs_Object * obj, int updateTime);
++int yaffs_ReadDataFromFile(yaffs_Object *obj, __u8 *buffer, loff_t offset,
++				int nBytes);
++int yaffs_WriteDataToFile(yaffs_Object *obj, const __u8 *buffer, loff_t offset,
++				int nBytes, int writeThrough);
++int yaffs_ResizeFile(yaffs_Object *obj, loff_t newSize);
++
++yaffs_Object *yaffs_MknodFile(yaffs_Object *parent, const YCHAR *name,
++				__u32 mode, __u32 uid, __u32 gid);
++int yaffs_FlushFile(yaffs_Object *obj, int updateTime);
+ 
+ /* Flushing and checkpointing */
+ void yaffs_FlushEntireDeviceCache(yaffs_Device *dev);
+@@ -850,33 +849,33 @@ int yaffs_CheckpointSave(yaffs_Device *d
+ int yaffs_CheckpointRestore(yaffs_Device *dev);
+ 
+ /* Directory operations */
+-yaffs_Object *yaffs_MknodDirectory(yaffs_Object * parent, const YCHAR * name,
+-				   __u32 mode, __u32 uid, __u32 gid);
+-yaffs_Object *yaffs_FindObjectByName(yaffs_Object * theDir, const YCHAR * name);
+-int yaffs_ApplyToDirectoryChildren(yaffs_Object * theDir,
++yaffs_Object *yaffs_MknodDirectory(yaffs_Object *parent, const YCHAR *name,
++				__u32 mode, __u32 uid, __u32 gid);
++yaffs_Object *yaffs_FindObjectByName(yaffs_Object *theDir, const YCHAR *name);
++int yaffs_ApplyToDirectoryChildren(yaffs_Object *theDir,
+ 				   int (*fn) (yaffs_Object *));
+ 
+-yaffs_Object *yaffs_FindObjectByNumber(yaffs_Device * dev, __u32 number);
++yaffs_Object *yaffs_FindObjectByNumber(yaffs_Device *dev, __u32 number);
+ 
+ /* Link operations */
+-yaffs_Object *yaffs_Link(yaffs_Object * parent, const YCHAR * name,
+-			 yaffs_Object * equivalentObject);
++yaffs_Object *yaffs_Link(yaffs_Object *parent, const YCHAR *name,
++			 yaffs_Object *equivalentObject);
+ 
+-yaffs_Object *yaffs_GetEquivalentObject(yaffs_Object * obj);
++yaffs_Object *yaffs_GetEquivalentObject(yaffs_Object *obj);
+ 
+ /* Symlink operations */
+-yaffs_Object *yaffs_MknodSymLink(yaffs_Object * parent, const YCHAR * name,
++yaffs_Object *yaffs_MknodSymLink(yaffs_Object *parent, const YCHAR *name,
+ 				 __u32 mode, __u32 uid, __u32 gid,
+-				 const YCHAR * alias);
+-YCHAR *yaffs_GetSymlinkAlias(yaffs_Object * obj);
++				 const YCHAR *alias);
++YCHAR *yaffs_GetSymlinkAlias(yaffs_Object *obj);
+ 
+ /* Special inodes (fifos, sockets and devices) */
+-yaffs_Object *yaffs_MknodSpecial(yaffs_Object * parent, const YCHAR * name,
++yaffs_Object *yaffs_MknodSpecial(yaffs_Object *parent, const YCHAR *name,
+ 				 __u32 mode, __u32 uid, __u32 gid, __u32 rdev);
+ 
+ /* Special directories */
+-yaffs_Object *yaffs_Root(yaffs_Device * dev);
+-yaffs_Object *yaffs_LostNFound(yaffs_Device * dev);
++yaffs_Object *yaffs_Root(yaffs_Device *dev);
++yaffs_Object *yaffs_LostNFound(yaffs_Device *dev);
+ 
+ #ifdef CONFIG_YAFFS_WINCE
+ /* CONFIG_YAFFS_WINCE special stuff */
+@@ -885,18 +884,21 @@ void yfsd_WinFileTimeNow(__u32 target[2]
+ 
+ #ifdef __KERNEL__
+ 
+-void yaffs_HandleDeferedFree(yaffs_Object * obj);
++void yaffs_HandleDeferedFree(yaffs_Object *obj);
+ #endif
+ 
+ /* Debug dump  */
+-int yaffs_DumpObject(yaffs_Object * obj);
++int yaffs_DumpObject(yaffs_Object *obj);
+ 
+-void yaffs_GutsTest(yaffs_Device * dev);
++void yaffs_GutsTest(yaffs_Device *dev);
+ 
+ /* A few useful functions */
+-void yaffs_InitialiseTags(yaffs_ExtendedTags * tags);
+-void yaffs_DeleteChunk(yaffs_Device * dev, int chunkId, int markNAND, int lyn);
+-int yaffs_CheckFF(__u8 * buffer, int nBytes);
++void yaffs_InitialiseTags(yaffs_ExtendedTags *tags);
++void yaffs_DeleteChunk(yaffs_Device *dev, int chunkId, int markNAND, int lyn);
++int yaffs_CheckFF(__u8 *buffer, int nBytes);
+ void yaffs_HandleChunkError(yaffs_Device *dev, yaffs_BlockInfo *bi);
+ 
++__u8 *yaffs_GetTempBuffer(yaffs_Device *dev, int lineNo);
++void yaffs_ReleaseTempBuffer(yaffs_Device *dev, __u8 *buffer, int lineNo);
++
+ #endif
+--- a/fs/yaffs2/yaffs_mtdif1.c
++++ b/fs/yaffs2/yaffs_mtdif1.c
+@@ -26,7 +26,7 @@
+ #include "yportenv.h"
+ #include "yaffs_guts.h"
+ #include "yaffs_packedtags1.h"
+-#include "yaffs_tagscompat.h"	// for yaffs_CalcTagsECC
++#include "yaffs_tagscompat.h"	/* for yaffs_CalcTagsECC */
+ 
+ #include "linux/kernel.h"
+ #include "linux/version.h"
+@@ -34,9 +34,9 @@
+ #include "linux/mtd/mtd.h"
+ 
+ /* Don't compile this module if we don't have MTD's mtd_oob_ops interface */
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 
+-const char *yaffs_mtdif1_c_version = "$Id: yaffs_mtdif1.c,v 1.3 2007/05/15 20:16:11 ian Exp $";
++const char *yaffs_mtdif1_c_version = "$Id: yaffs_mtdif1.c,v 1.10 2009-03-09 07:41:10 charles Exp $";
+ 
+ #ifndef CONFIG_YAFFS_9BYTE_TAGS
+ # define YTAG1_SIZE 8
+@@ -89,9 +89,9 @@ static struct nand_ecclayout nand_oob_16
+  * Returns YAFFS_OK or YAFFS_FAIL.
+  */
+ int nandmtd1_WriteChunkWithTagsToNAND(yaffs_Device *dev,
+-	int chunkInNAND, const __u8 * data, const yaffs_ExtendedTags * etags)
++	int chunkInNAND, const __u8 *data, const yaffs_ExtendedTags *etags)
+ {
+-	struct mtd_info * mtd = dev->genericDevice;
++	struct mtd_info *mtd = dev->genericDevice;
+ 	int chunkBytes = dev->nDataBytesPerChunk;
+ 	loff_t addr = ((loff_t)chunkInNAND) * chunkBytes;
+ 	struct mtd_oob_ops ops;
+@@ -146,7 +146,7 @@ int nandmtd1_WriteChunkWithTagsToNAND(ya
+ 
+ /* Return with empty ExtendedTags but add eccResult.
+  */
+-static int rettags(yaffs_ExtendedTags * etags, int eccResult, int retval)
++static int rettags(yaffs_ExtendedTags *etags, int eccResult, int retval)
+ {
+ 	if (etags) {
+ 		memset(etags, 0, sizeof(*etags));
+@@ -169,9 +169,9 @@ static int rettags(yaffs_ExtendedTags *
+  * Returns YAFFS_OK or YAFFS_FAIL.
+  */
+ int nandmtd1_ReadChunkWithTagsFromNAND(yaffs_Device *dev,
+-	int chunkInNAND, __u8 * data, yaffs_ExtendedTags * etags)
++	int chunkInNAND, __u8 *data, yaffs_ExtendedTags *etags)
+ {
+-	struct mtd_info * mtd = dev->genericDevice;
++	struct mtd_info *mtd = dev->genericDevice;
+ 	int chunkBytes = dev->nDataBytesPerChunk;
+ 	loff_t addr = ((loff_t)chunkInNAND) * chunkBytes;
+ 	int eccres = YAFFS_ECC_RESULT_NO_ERROR;
+@@ -189,7 +189,7 @@ int nandmtd1_ReadChunkWithTagsFromNAND(y
+ 	ops.datbuf = data;
+ 	ops.oobbuf = (__u8 *)&pt1;
+ 
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20))
++#if (MTD_VERSION_CODE < MTD_VERSION(2, 6, 20))
+ 	/* In MTD 2.6.18 to 2.6.19 nand_base.c:nand_do_read_oob() has a bug;
+ 	 * help it out with ops.len = ops.ooblen when ops.datbuf == NULL.
+ 	 */
+@@ -284,11 +284,11 @@ int nandmtd1_ReadChunkWithTagsFromNAND(y
+  */
+ int nandmtd1_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo)
+ {
+-	struct mtd_info * mtd = dev->genericDevice;
++	struct mtd_info *mtd = dev->genericDevice;
+ 	int blocksize = dev->nChunksPerBlock * dev->nDataBytesPerChunk;
+ 	int retval;
+ 
+-	yaffs_trace(YAFFS_TRACE_BAD_BLOCKS, "marking block %d bad", blockNo);
++	yaffs_trace(YAFFS_TRACE_BAD_BLOCKS, "marking block %d bad\n", blockNo);
+ 
+ 	retval = mtd->block_markbad(mtd, (loff_t)blocksize * blockNo);
+ 	return (retval) ? YAFFS_FAIL : YAFFS_OK;
+@@ -298,7 +298,7 @@ int nandmtd1_MarkNANDBlockBad(struct yaf
+  *
+  * Returns YAFFS_OK or YAFFS_FAIL.
+  */
+-static int nandmtd1_TestPrerequists(struct mtd_info * mtd)
++static int nandmtd1_TestPrerequists(struct mtd_info *mtd)
+ {
+ 	/* 2.6.18 has mtd->ecclayout->oobavail */
+ 	/* 2.6.21 has mtd->ecclayout->oobavail and mtd->oobavail */
+@@ -323,10 +323,11 @@ static int nandmtd1_TestPrerequists(stru
+  * Always returns YAFFS_OK.
+  */
+ int nandmtd1_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+-	yaffs_BlockState * pState, int *pSequenceNumber)
++	yaffs_BlockState *pState, __u32 *pSequenceNumber)
+ {
+-	struct mtd_info * mtd = dev->genericDevice;
++	struct mtd_info *mtd = dev->genericDevice;
+ 	int chunkNo = blockNo * dev->nChunksPerBlock;
++	loff_t addr = (loff_t)chunkNo * dev->nDataBytesPerChunk;
+ 	yaffs_ExtendedTags etags;
+ 	int state = YAFFS_BLOCK_STATE_DEAD;
+ 	int seqnum = 0;
+@@ -335,21 +336,22 @@ int nandmtd1_QueryNANDBlock(struct yaffs
+ 	/* We don't yet have a good place to test for MTD config prerequists.
+ 	 * Do it here as we are called during the initial scan.
+ 	 */
+-	if (nandmtd1_TestPrerequists(mtd) != YAFFS_OK) {
++	if (nandmtd1_TestPrerequists(mtd) != YAFFS_OK)
+ 		return YAFFS_FAIL;
+-	}
+ 
+ 	retval = nandmtd1_ReadChunkWithTagsFromNAND(dev, chunkNo, NULL, &etags);
++	etags.blockBad = (mtd->block_isbad)(mtd, addr);
+ 	if (etags.blockBad) {
+ 		yaffs_trace(YAFFS_TRACE_BAD_BLOCKS,
+-			"block %d is marked bad", blockNo);
++			"block %d is marked bad\n", blockNo);
+ 		state = YAFFS_BLOCK_STATE_DEAD;
+-	}
+-	else if (etags.chunkUsed) {
++	} else if (etags.eccResult != YAFFS_ECC_RESULT_NO_ERROR) {
++		/* bad tags, need to look more closely */
++		state = YAFFS_BLOCK_STATE_NEEDS_SCANNING;
++	} else if (etags.chunkUsed) {
+ 		state = YAFFS_BLOCK_STATE_NEEDS_SCANNING;
+ 		seqnum = etags.sequenceNumber;
+-	}
+-	else {
++	} else {
+ 		state = YAFFS_BLOCK_STATE_EMPTY;
+ 	}
+ 
+@@ -360,4 +362,4 @@ int nandmtd1_QueryNANDBlock(struct yaffs
+ 	return YAFFS_OK;
+ }
+ 
+-#endif /*KERNEL_VERSION*/
++#endif /*MTD_VERSION*/
+--- a/fs/yaffs2/yaffs_mtdif1.h
++++ b/fs/yaffs2/yaffs_mtdif1.h
+@@ -14,15 +14,15 @@
+ #ifndef __YAFFS_MTDIF1_H__
+ #define __YAFFS_MTDIF1_H__
+ 
+-int nandmtd1_WriteChunkWithTagsToNAND(yaffs_Device * dev, int chunkInNAND,
+-	const __u8 * data, const yaffs_ExtendedTags * tags);
++int nandmtd1_WriteChunkWithTagsToNAND(yaffs_Device *dev, int chunkInNAND,
++	const __u8 *data, const yaffs_ExtendedTags *tags);
+ 
+-int nandmtd1_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+-	__u8 * data, yaffs_ExtendedTags * tags);
++int nandmtd1_ReadChunkWithTagsFromNAND(yaffs_Device *dev, int chunkInNAND,
++	__u8 *data, yaffs_ExtendedTags *tags);
+ 
+ int nandmtd1_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo);
+ 
+ int nandmtd1_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+-	yaffs_BlockState * state, int *sequenceNumber);
++	yaffs_BlockState *state, __u32 *sequenceNumber);
+ 
+ #endif
+--- a/fs/yaffs2/yaffs_mtdif2.c
++++ b/fs/yaffs2/yaffs_mtdif2.c
+@@ -14,7 +14,7 @@
+ /* mtd interface for YAFFS2 */
+ 
+ const char *yaffs_mtdif2_c_version =
+-    "$Id: yaffs_mtdif2.c,v 1.17 2007-02-14 01:09:06 wookey Exp $";
++	"$Id: yaffs_mtdif2.c,v 1.23 2009-03-06 17:20:53 wookey Exp $";
+ 
+ #include "yportenv.h"
+ 
+@@ -27,19 +27,23 @@ const char *yaffs_mtdif2_c_version =
+ 
+ #include "yaffs_packedtags2.h"
+ 
+-int nandmtd2_WriteChunkWithTagsToNAND(yaffs_Device * dev, int chunkInNAND,
+-				      const __u8 * data,
+-				      const yaffs_ExtendedTags * tags)
++/* NB For use with inband tags....
++ * We assume that the data buffer is of size totalBytersPerChunk so that we can also
++ * use it to load the tags.
++ */
++int nandmtd2_WriteChunkWithTagsToNAND(yaffs_Device *dev, int chunkInNAND,
++				      const __u8 *data,
++				      const yaffs_ExtendedTags *tags)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	struct mtd_oob_ops ops;
+ #else
+ 	size_t dummy;
+ #endif
+ 	int retval = 0;
+ 
+-	loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
++	loff_t addr;
+ 
+ 	yaffs_PackedTags2 pt;
+ 
+@@ -48,46 +52,40 @@ int nandmtd2_WriteChunkWithTagsToNAND(ya
+ 	   ("nandmtd2_WriteChunkWithTagsToNAND chunk %d data %p tags %p"
+ 	    TENDSTR), chunkInNAND, data, tags));
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-	if (tags)
+-		yaffs_PackTags2(&pt, tags);
+-	else
+-		BUG(); /* both tags and data should always be present */
+ 
+-	if (data) {
+-		ops.mode = MTD_OOB_AUTO;
+-		ops.ooblen = sizeof(pt);
+-		ops.len = dev->nDataBytesPerChunk;
+-		ops.ooboffs = 0;
+-		ops.datbuf = (__u8 *)data;
+-		ops.oobbuf = (void *)&pt;
+-		retval = mtd->write_oob(mtd, addr, &ops);
++	addr  = ((loff_t) chunkInNAND) * dev->totalBytesPerChunk;
++
++	/* For yaffs2 writing there must be both data and tags.
++	 * If we're using inband tags, then the tags are stuffed into
++	 * the end of the data buffer.
++	 */
++	if (!data || !tags)
++		BUG();
++	else if (dev->inbandTags) {
++		yaffs_PackedTags2TagsPart *pt2tp;
++		pt2tp = (yaffs_PackedTags2TagsPart *)(data + dev->nDataBytesPerChunk);
++		yaffs_PackTags2TagsPart(pt2tp, tags);
+ 	} else
+-		BUG(); /* both tags and data should always be present */
+-#else
+-	if (tags) {
+ 		yaffs_PackTags2(&pt, tags);
+-	}
+ 
+-	if (data && tags) {
+-		if (dev->useNANDECC)
+-			retval =
+-			    mtd->write_ecc(mtd, addr, dev->nDataBytesPerChunk,
+-					   &dummy, data, (__u8 *) & pt, NULL);
+-		else
+-			retval =
+-			    mtd->write_ecc(mtd, addr, dev->nDataBytesPerChunk,
+-					   &dummy, data, (__u8 *) & pt, NULL);
+-	} else {
+-		if (data)
+-			retval =
+-			    mtd->write(mtd, addr, dev->nDataBytesPerChunk, &dummy,
+-				       data);
+-		if (tags)
+-			retval =
+-			    mtd->write_oob(mtd, addr, mtd->oobsize, &dummy,
+-					   (__u8 *) & pt);
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
++	ops.mode = MTD_OOB_AUTO;
++	ops.ooblen = (dev->inbandTags) ? 0 : sizeof(pt);
++	ops.len = dev->totalBytesPerChunk;
++	ops.ooboffs = 0;
++	ops.datbuf = (__u8 *)data;
++	ops.oobbuf = (dev->inbandTags) ? NULL : (void *)&pt;
++	retval = mtd->write_oob(mtd, addr, &ops);
+ 
++#else
++	if (!dev->inbandTags) {
++		retval =
++		    mtd->write_ecc(mtd, addr, dev->nDataBytesPerChunk,
++				   &dummy, data, (__u8 *) &pt, NULL);
++	} else {
++		retval =
++		    mtd->write(mtd, addr, dev->totalBytesPerChunk, &dummy,
++			       data);
+ 	}
+ #endif
+ 
+@@ -97,17 +95,18 @@ int nandmtd2_WriteChunkWithTagsToNAND(ya
+ 		return YAFFS_FAIL;
+ }
+ 
+-int nandmtd2_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+-				       __u8 * data, yaffs_ExtendedTags * tags)
++int nandmtd2_ReadChunkWithTagsFromNAND(yaffs_Device *dev, int chunkInNAND,
++				       __u8 *data, yaffs_ExtendedTags *tags)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	struct mtd_oob_ops ops;
+ #endif
+ 	size_t dummy;
+ 	int retval = 0;
++	int localData = 0;
+ 
+-	loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
++	loff_t addr = ((loff_t) chunkInNAND) * dev->totalBytesPerChunk;
+ 
+ 	yaffs_PackedTags2 pt;
+ 
+@@ -116,9 +115,20 @@ int nandmtd2_ReadChunkWithTagsFromNAND(y
+ 	   ("nandmtd2_ReadChunkWithTagsFromNAND chunk %d data %p tags %p"
+ 	    TENDSTR), chunkInNAND, data, tags));
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-	if (data && !tags)
+-		retval = mtd->read(mtd, addr, dev->nDataBytesPerChunk,
++	if (dev->inbandTags) {
++
++		if (!data) {
++			localData = 1;
++			data = yaffs_GetTempBuffer(dev, __LINE__);
++		}
++
++
++	}
++
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
++	if (dev->inbandTags || (data && !tags))
++		retval = mtd->read(mtd, addr, dev->totalBytesPerChunk,
+ 				&dummy, data);
+ 	else if (tags) {
+ 		ops.mode = MTD_OOB_AUTO;
+@@ -130,38 +140,42 @@ int nandmtd2_ReadChunkWithTagsFromNAND(y
+ 		retval = mtd->read_oob(mtd, addr, &ops);
+ 	}
+ #else
+-	if (data && tags) {
+-		if (dev->useNANDECC) {
+-			retval =
+-			    mtd->read_ecc(mtd, addr, dev->nDataBytesPerChunk,
+-					  &dummy, data, dev->spareBuffer,
+-					  NULL);
+-		} else {
+-			retval =
+-			    mtd->read_ecc(mtd, addr, dev->nDataBytesPerChunk,
++	if (!dev->inbandTags && data && tags) {
++
++		retval = mtd->read_ecc(mtd, addr, dev->nDataBytesPerChunk,
+ 					  &dummy, data, dev->spareBuffer,
+ 					  NULL);
+-		}
+ 	} else {
+ 		if (data)
+ 			retval =
+ 			    mtd->read(mtd, addr, dev->nDataBytesPerChunk, &dummy,
+ 				      data);
+-		if (tags)
++		if (!dev->inbandTags && tags)
+ 			retval =
+ 			    mtd->read_oob(mtd, addr, mtd->oobsize, &dummy,
+ 					  dev->spareBuffer);
+ 	}
+ #endif
+ 
+-	memcpy(&pt, dev->spareBuffer, sizeof(pt));
+ 
+-	if (tags)
+-		yaffs_UnpackTags2(tags, &pt);
++	if (dev->inbandTags) {
++		if (tags) {
++			yaffs_PackedTags2TagsPart *pt2tp;
++			pt2tp = (yaffs_PackedTags2TagsPart *)&data[dev->nDataBytesPerChunk];
++			yaffs_UnpackTags2TagsPart(tags, pt2tp);
++		}
++	} else {
++		if (tags) {
++			memcpy(&pt, dev->spareBuffer, sizeof(pt));
++			yaffs_UnpackTags2(tags, &pt);
++		}
++	}
++
++	if (localData)
++		yaffs_ReleaseTempBuffer(dev, data, __LINE__);
+ 
+-	if(tags && retval == -EBADMSG && tags->eccResult == YAFFS_ECC_RESULT_NO_ERROR)
++	if (tags && retval == -EBADMSG && tags->eccResult == YAFFS_ECC_RESULT_NO_ERROR)
+ 		tags->eccResult = YAFFS_ECC_RESULT_UNFIXED;
+-
+ 	if (retval == 0)
+ 		return YAFFS_OK;
+ 	else
+@@ -178,7 +192,7 @@ int nandmtd2_MarkNANDBlockBad(struct yaf
+ 	retval =
+ 	    mtd->block_markbad(mtd,
+ 			       blockNo * dev->nChunksPerBlock *
+-			       dev->nDataBytesPerChunk);
++			       dev->totalBytesPerChunk);
+ 
+ 	if (retval == 0)
+ 		return YAFFS_OK;
+@@ -188,7 +202,7 @@ int nandmtd2_MarkNANDBlockBad(struct yaf
+ }
+ 
+ int nandmtd2_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+-			    yaffs_BlockState * state, int *sequenceNumber)
++			    yaffs_BlockState *state, __u32 *sequenceNumber)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+ 	int retval;
+@@ -198,7 +212,7 @@ int nandmtd2_QueryNANDBlock(struct yaffs
+ 	retval =
+ 	    mtd->block_isbad(mtd,
+ 			     blockNo * dev->nChunksPerBlock *
+-			     dev->nDataBytesPerChunk);
++			     dev->totalBytesPerChunk);
+ 
+ 	if (retval) {
+ 		T(YAFFS_TRACE_MTD, (TSTR("block is bad" TENDSTR)));
+--- a/fs/yaffs2/yaffs_mtdif2.h
++++ b/fs/yaffs2/yaffs_mtdif2.h
+@@ -17,13 +17,13 @@
+ #define __YAFFS_MTDIF2_H__
+ 
+ #include "yaffs_guts.h"
+-int nandmtd2_WriteChunkWithTagsToNAND(yaffs_Device * dev, int chunkInNAND,
+-				      const __u8 * data,
+-				      const yaffs_ExtendedTags * tags);
+-int nandmtd2_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+-				       __u8 * data, yaffs_ExtendedTags * tags);
++int nandmtd2_WriteChunkWithTagsToNAND(yaffs_Device *dev, int chunkInNAND,
++				const __u8 *data,
++				const yaffs_ExtendedTags *tags);
++int nandmtd2_ReadChunkWithTagsFromNAND(yaffs_Device *dev, int chunkInNAND,
++				__u8 *data, yaffs_ExtendedTags *tags);
+ int nandmtd2_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo);
+ int nandmtd2_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+-			    yaffs_BlockState * state, int *sequenceNumber);
++			yaffs_BlockState *state, __u32 *sequenceNumber);
+ 
+ #endif
+--- a/fs/yaffs2/yaffs_mtdif.c
++++ b/fs/yaffs2/yaffs_mtdif.c
+@@ -12,7 +12,7 @@
+  */
+ 
+ const char *yaffs_mtdif_c_version =
+-    "$Id: yaffs_mtdif.c,v 1.19 2007-02-14 01:09:06 wookey Exp $";
++	"$Id: yaffs_mtdif.c,v 1.22 2009-03-06 17:20:51 wookey Exp $";
+ 
+ #include "yportenv.h"
+ 
+@@ -24,7 +24,7 @@ const char *yaffs_mtdif_c_version =
+ #include "linux/time.h"
+ #include "linux/mtd/nand.h"
+ 
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18))
++#if (MTD_VERSION_CODE < MTD_VERSION(2, 6, 18))
+ static struct nand_oobinfo yaffs_oobinfo = {
+ 	.useecc = 1,
+ 	.eccbytes = 6,
+@@ -36,7 +36,7 @@ static struct nand_oobinfo yaffs_noeccin
+ };
+ #endif
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ static inline void translate_spare2oob(const yaffs_Spare *spare, __u8 *oob)
+ {
+ 	oob[0] = spare->tagByte0;
+@@ -45,8 +45,8 @@ static inline void translate_spare2oob(c
+ 	oob[3] = spare->tagByte3;
+ 	oob[4] = spare->tagByte4;
+ 	oob[5] = spare->tagByte5 & 0x3f;
+-	oob[5] |= spare->blockStatus == 'Y' ? 0: 0x80;
+-	oob[5] |= spare->pageStatus == 0 ? 0: 0x40;
++	oob[5] |= spare->blockStatus == 'Y' ? 0 : 0x80;
++	oob[5] |= spare->pageStatus == 0 ? 0 : 0x40;
+ 	oob[6] = spare->tagByte6;
+ 	oob[7] = spare->tagByte7;
+ }
+@@ -71,18 +71,18 @@ static inline void translate_oob2spare(y
+ }
+ #endif
+ 
+-int nandmtd_WriteChunkToNAND(yaffs_Device * dev, int chunkInNAND,
+-			     const __u8 * data, const yaffs_Spare * spare)
++int nandmtd_WriteChunkToNAND(yaffs_Device *dev, int chunkInNAND,
++			     const __u8 *data, const yaffs_Spare *spare)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	struct mtd_oob_ops ops;
+ #endif
+ 	size_t dummy;
+ 	int retval = 0;
+ 
+ 	loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	__u8 spareAsBytes[8]; /* OOB */
+ 
+ 	if (data && !spare)
+@@ -135,18 +135,18 @@ int nandmtd_WriteChunkToNAND(yaffs_Devic
+ 		return YAFFS_FAIL;
+ }
+ 
+-int nandmtd_ReadChunkFromNAND(yaffs_Device * dev, int chunkInNAND, __u8 * data,
+-			      yaffs_Spare * spare)
++int nandmtd_ReadChunkFromNAND(yaffs_Device *dev, int chunkInNAND, __u8 *data,
++			      yaffs_Spare *spare)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	struct mtd_oob_ops ops;
+ #endif
+ 	size_t dummy;
+ 	int retval = 0;
+ 
+ 	loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	__u8 spareAsBytes[8]; /* OOB */
+ 
+ 	if (data && !spare)
+@@ -205,7 +205,7 @@ int nandmtd_ReadChunkFromNAND(yaffs_Devi
+ 		return YAFFS_FAIL;
+ }
+ 
+-int nandmtd_EraseBlockInNAND(yaffs_Device * dev, int blockNumber)
++int nandmtd_EraseBlockInNAND(yaffs_Device *dev, int blockNumber)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+ 	__u32 addr =
+@@ -234,7 +234,7 @@ int nandmtd_EraseBlockInNAND(yaffs_Devic
+ 		return YAFFS_FAIL;
+ }
+ 
+-int nandmtd_InitialiseNAND(yaffs_Device * dev)
++int nandmtd_InitialiseNAND(yaffs_Device *dev)
+ {
+ 	return YAFFS_OK;
+ }
+--- a/fs/yaffs2/yaffs_mtdif.h
++++ b/fs/yaffs2/yaffs_mtdif.h
+@@ -18,10 +18,15 @@
+ 
+ #include "yaffs_guts.h"
+ 
+-int nandmtd_WriteChunkToNAND(yaffs_Device * dev, int chunkInNAND,
+-			     const __u8 * data, const yaffs_Spare * spare);
+-int nandmtd_ReadChunkFromNAND(yaffs_Device * dev, int chunkInNAND, __u8 * data,
+-			      yaffs_Spare * spare);
+-int nandmtd_EraseBlockInNAND(yaffs_Device * dev, int blockNumber);
+-int nandmtd_InitialiseNAND(yaffs_Device * dev);
++#if (MTD_VERSION_CODE < MTD_VERSION(2, 6, 18))
++extern struct nand_oobinfo yaffs_oobinfo;
++extern struct nand_oobinfo yaffs_noeccinfo;
++#endif
++
++int nandmtd_WriteChunkToNAND(yaffs_Device *dev, int chunkInNAND,
++			const __u8 *data, const yaffs_Spare *spare);
++int nandmtd_ReadChunkFromNAND(yaffs_Device *dev, int chunkInNAND, __u8 *data,
++			yaffs_Spare *spare);
++int nandmtd_EraseBlockInNAND(yaffs_Device *dev, int blockNumber);
++int nandmtd_InitialiseNAND(yaffs_Device *dev);
+ #endif
+--- a/fs/yaffs2/yaffs_nand.c
++++ b/fs/yaffs2/yaffs_nand.c
+@@ -12,16 +12,17 @@
+  */
+ 
+ const char *yaffs_nand_c_version =
+-    "$Id: yaffs_nand.c,v 1.7 2007-02-14 01:09:06 wookey Exp $";
++	"$Id: yaffs_nand.c,v 1.10 2009-03-06 17:20:54 wookey Exp $";
+ 
+ #include "yaffs_nand.h"
+ #include "yaffs_tagscompat.h"
+ #include "yaffs_tagsvalidity.h"
+ 
++#include "yaffs_getblockinfo.h"
+ 
+-int yaffs_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+-					   __u8 * buffer,
+-					   yaffs_ExtendedTags * tags)
++int yaffs_ReadChunkWithTagsFromNAND(yaffs_Device *dev, int chunkInNAND,
++					   __u8 *buffer,
++					   yaffs_ExtendedTags *tags)
+ {
+ 	int result;
+ 	yaffs_ExtendedTags localTags;
+@@ -29,7 +30,7 @@ int yaffs_ReadChunkWithTagsFromNAND(yaff
+ 	int realignedChunkInNAND = chunkInNAND - dev->chunkOffset;
+ 
+ 	/* If there are no tags provided, use local tags to get prioritised gc working */
+-	if(!tags)
++	if (!tags)
+ 		tags = &localTags;
+ 
+ 	if (dev->readChunkWithTagsFromNAND)
+@@ -40,20 +41,20 @@ int yaffs_ReadChunkWithTagsFromNAND(yaff
+ 									realignedChunkInNAND,
+ 									buffer,
+ 									tags);
+-	if(tags &&
+-	   tags->eccResult > YAFFS_ECC_RESULT_NO_ERROR){
++	if (tags &&
++	   tags->eccResult > YAFFS_ECC_RESULT_NO_ERROR) {
+ 
+ 		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, chunkInNAND/dev->nChunksPerBlock);
+-                yaffs_HandleChunkError(dev,bi);
++		yaffs_HandleChunkError(dev, bi);
+ 	}
+ 
+ 	return result;
+ }
+ 
+-int yaffs_WriteChunkWithTagsToNAND(yaffs_Device * dev,
++int yaffs_WriteChunkWithTagsToNAND(yaffs_Device *dev,
+ 						   int chunkInNAND,
+-						   const __u8 * buffer,
+-						   yaffs_ExtendedTags * tags)
++						   const __u8 *buffer,
++						   yaffs_ExtendedTags *tags)
+ {
+ 	chunkInNAND -= dev->chunkOffset;
+ 
+@@ -84,7 +85,7 @@ int yaffs_WriteChunkWithTagsToNAND(yaffs
+ 								       tags);
+ }
+ 
+-int yaffs_MarkBlockBad(yaffs_Device * dev, int blockNo)
++int yaffs_MarkBlockBad(yaffs_Device *dev, int blockNo)
+ {
+ 	blockNo -= dev->blockOffset;
+ 
+@@ -95,10 +96,10 @@ int yaffs_MarkBlockBad(yaffs_Device * de
+ 		return yaffs_TagsCompatabilityMarkNANDBlockBad(dev, blockNo);
+ }
+ 
+-int yaffs_QueryInitialBlockState(yaffs_Device * dev,
++int yaffs_QueryInitialBlockState(yaffs_Device *dev,
+ 						 int blockNo,
+-						 yaffs_BlockState * state,
+-						 unsigned *sequenceNumber)
++						 yaffs_BlockState *state,
++						 __u32 *sequenceNumber)
+ {
+ 	blockNo -= dev->blockOffset;
+ 
+--- a/fs/yaffs2/yaffs_nandemul2k.h
++++ b/fs/yaffs2/yaffs_nandemul2k.h
+@@ -21,14 +21,14 @@
+ #include "yaffs_guts.h"
+ 
+ int nandemul2k_WriteChunkWithTagsToNAND(struct yaffs_DeviceStruct *dev,
+-					int chunkInNAND, const __u8 * data,
+-					yaffs_ExtendedTags * tags);
++					int chunkInNAND, const __u8 *data,
++					const yaffs_ExtendedTags *tags);
+ int nandemul2k_ReadChunkWithTagsFromNAND(struct yaffs_DeviceStruct *dev,
+-					 int chunkInNAND, __u8 * data,
+-					 yaffs_ExtendedTags * tags);
++					 int chunkInNAND, __u8 *data,
++					 yaffs_ExtendedTags *tags);
+ int nandemul2k_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo);
+ int nandemul2k_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+-			      yaffs_BlockState * state, int *sequenceNumber);
++			      yaffs_BlockState *state, __u32 *sequenceNumber);
+ int nandemul2k_EraseBlockInNAND(struct yaffs_DeviceStruct *dev,
+ 				int blockInNAND);
+ int nandemul2k_InitialiseNAND(struct yaffs_DeviceStruct *dev);
+--- a/fs/yaffs2/yaffs_nand.h
++++ b/fs/yaffs2/yaffs_nand.h
+@@ -19,21 +19,21 @@
+ 
+ 
+ 
+-int yaffs_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+-					   __u8 * buffer,
+-					   yaffs_ExtendedTags * tags);
+-
+-int yaffs_WriteChunkWithTagsToNAND(yaffs_Device * dev,
+-						   int chunkInNAND,
+-						   const __u8 * buffer,
+-						   yaffs_ExtendedTags * tags);
+-
+-int yaffs_MarkBlockBad(yaffs_Device * dev, int blockNo);
+-
+-int yaffs_QueryInitialBlockState(yaffs_Device * dev,
+-						 int blockNo,
+-						 yaffs_BlockState * state,
+-						 unsigned *sequenceNumber);
++int yaffs_ReadChunkWithTagsFromNAND(yaffs_Device *dev, int chunkInNAND,
++					__u8 *buffer,
++					yaffs_ExtendedTags *tags);
++
++int yaffs_WriteChunkWithTagsToNAND(yaffs_Device *dev,
++						int chunkInNAND,
++						const __u8 *buffer,
++						yaffs_ExtendedTags *tags);
++
++int yaffs_MarkBlockBad(yaffs_Device *dev, int blockNo);
++
++int yaffs_QueryInitialBlockState(yaffs_Device *dev,
++						int blockNo,
++						yaffs_BlockState *state,
++						unsigned *sequenceNumber);
+ 
+ int yaffs_EraseBlockInNAND(struct yaffs_DeviceStruct *dev,
+ 				  int blockInNAND);
+--- a/fs/yaffs2/yaffs_packedtags1.c
++++ b/fs/yaffs2/yaffs_packedtags1.c
+@@ -14,7 +14,7 @@
+ #include "yaffs_packedtags1.h"
+ #include "yportenv.h"
+ 
+-void yaffs_PackTags1(yaffs_PackedTags1 * pt, const yaffs_ExtendedTags * t)
++void yaffs_PackTags1(yaffs_PackedTags1 *pt, const yaffs_ExtendedTags *t)
+ {
+ 	pt->chunkId = t->chunkId;
+ 	pt->serialNumber = t->serialNumber;
+@@ -27,7 +27,7 @@ void yaffs_PackTags1(yaffs_PackedTags1 *
+ 
+ }
+ 
+-void yaffs_UnpackTags1(yaffs_ExtendedTags * t, const yaffs_PackedTags1 * pt)
++void yaffs_UnpackTags1(yaffs_ExtendedTags *t, const yaffs_PackedTags1 *pt)
+ {
+ 	static const __u8 allFF[] =
+ 	    { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+@@ -35,9 +35,8 @@ void yaffs_UnpackTags1(yaffs_ExtendedTag
+ 
+ 	if (memcmp(allFF, pt, sizeof(yaffs_PackedTags1))) {
+ 		t->blockBad = 0;
+-		if (pt->shouldBeFF != 0xFFFFFFFF) {
++		if (pt->shouldBeFF != 0xFFFFFFFF)
+ 			t->blockBad = 1;
+-		}
+ 		t->chunkUsed = 1;
+ 		t->objectId = pt->objectId;
+ 		t->chunkId = pt->chunkId;
+@@ -47,6 +46,5 @@ void yaffs_UnpackTags1(yaffs_ExtendedTag
+ 		t->serialNumber = pt->serialNumber;
+ 	} else {
+ 		memset(t, 0, sizeof(yaffs_ExtendedTags));
+-
+ 	}
+ }
+--- a/fs/yaffs2/yaffs_packedtags1.h
++++ b/fs/yaffs2/yaffs_packedtags1.h
+@@ -32,6 +32,6 @@ typedef struct {
+ 
+ } yaffs_PackedTags1;
+ 
+-void yaffs_PackTags1(yaffs_PackedTags1 * pt, const yaffs_ExtendedTags * t);
+-void yaffs_UnpackTags1(yaffs_ExtendedTags * t, const yaffs_PackedTags1 * pt);
++void yaffs_PackTags1(yaffs_PackedTags1 *pt, const yaffs_ExtendedTags *t);
++void yaffs_UnpackTags1(yaffs_ExtendedTags *t, const yaffs_PackedTags1 *pt);
+ #endif
+--- a/fs/yaffs2/yaffs_packedtags2.c
++++ b/fs/yaffs2/yaffs_packedtags2.c
+@@ -37,60 +37,68 @@
+ #define EXTRA_OBJECT_TYPE_SHIFT (28)
+ #define EXTRA_OBJECT_TYPE_MASK  ((0x0F) << EXTRA_OBJECT_TYPE_SHIFT)
+ 
+-static void yaffs_DumpPackedTags2(const yaffs_PackedTags2 * pt)
++
++static void yaffs_DumpPackedTags2TagsPart(const yaffs_PackedTags2TagsPart *ptt)
+ {
+ 	T(YAFFS_TRACE_MTD,
+ 	  (TSTR("packed tags obj %d chunk %d byte %d seq %d" TENDSTR),
+-	   pt->t.objectId, pt->t.chunkId, pt->t.byteCount,
+-	   pt->t.sequenceNumber));
++	   ptt->objectId, ptt->chunkId, ptt->byteCount,
++	   ptt->sequenceNumber));
++}
++static void yaffs_DumpPackedTags2(const yaffs_PackedTags2 *pt)
++{
++	yaffs_DumpPackedTags2TagsPart(&pt->t);
+ }
+ 
+-static void yaffs_DumpTags2(const yaffs_ExtendedTags * t)
++static void yaffs_DumpTags2(const yaffs_ExtendedTags *t)
+ {
+ 	T(YAFFS_TRACE_MTD,
+ 	  (TSTR
+-	   ("ext.tags eccres %d blkbad %d chused %d obj %d chunk%d byte "
+-	    "%d del %d ser %d seq %d"
++	   ("ext.tags eccres %d blkbad %d chused %d obj %d chunk%d byte %d del %d ser %d seq %d"
+ 	    TENDSTR), t->eccResult, t->blockBad, t->chunkUsed, t->objectId,
+ 	   t->chunkId, t->byteCount, t->chunkDeleted, t->serialNumber,
+ 	   t->sequenceNumber));
+ 
+ }
+ 
+-void yaffs_PackTags2(yaffs_PackedTags2 * pt, const yaffs_ExtendedTags * t)
++void yaffs_PackTags2TagsPart(yaffs_PackedTags2TagsPart *ptt,
++		const yaffs_ExtendedTags *t)
+ {
+-	pt->t.chunkId = t->chunkId;
+-	pt->t.sequenceNumber = t->sequenceNumber;
+-	pt->t.byteCount = t->byteCount;
+-	pt->t.objectId = t->objectId;
++	ptt->chunkId = t->chunkId;
++	ptt->sequenceNumber = t->sequenceNumber;
++	ptt->byteCount = t->byteCount;
++	ptt->objectId = t->objectId;
+ 
+ 	if (t->chunkId == 0 && t->extraHeaderInfoAvailable) {
+ 		/* Store the extra header info instead */
+ 		/* We save the parent object in the chunkId */
+-		pt->t.chunkId = EXTRA_HEADER_INFO_FLAG
++		ptt->chunkId = EXTRA_HEADER_INFO_FLAG
+ 			| t->extraParentObjectId;
+-		if (t->extraIsShrinkHeader) {
+-			pt->t.chunkId |= EXTRA_SHRINK_FLAG;
+-		}
+-		if (t->extraShadows) {
+-			pt->t.chunkId |= EXTRA_SHADOWS_FLAG;
+-		}
++		if (t->extraIsShrinkHeader)
++			ptt->chunkId |= EXTRA_SHRINK_FLAG;
++		if (t->extraShadows)
++			ptt->chunkId |= EXTRA_SHADOWS_FLAG;
+ 
+-		pt->t.objectId &= ~EXTRA_OBJECT_TYPE_MASK;
+-		pt->t.objectId |=
++		ptt->objectId &= ~EXTRA_OBJECT_TYPE_MASK;
++		ptt->objectId |=
+ 		    (t->extraObjectType << EXTRA_OBJECT_TYPE_SHIFT);
+ 
+-		if (t->extraObjectType == YAFFS_OBJECT_TYPE_HARDLINK) {
+-			pt->t.byteCount = t->extraEquivalentObjectId;
+-		} else if (t->extraObjectType == YAFFS_OBJECT_TYPE_FILE) {
+-			pt->t.byteCount = t->extraFileLength;
+-		} else {
+-			pt->t.byteCount = 0;
+-		}
++		if (t->extraObjectType == YAFFS_OBJECT_TYPE_HARDLINK)
++			ptt->byteCount = t->extraEquivalentObjectId;
++		else if (t->extraObjectType == YAFFS_OBJECT_TYPE_FILE)
++			ptt->byteCount = t->extraFileLength;
++		else
++			ptt->byteCount = 0;
+ 	}
+ 
+-	yaffs_DumpPackedTags2(pt);
++	yaffs_DumpPackedTags2TagsPart(ptt);
+ 	yaffs_DumpTags2(t);
++}
++
++
++void yaffs_PackTags2(yaffs_PackedTags2 *pt, const yaffs_ExtendedTags *t)
++{
++	yaffs_PackTags2TagsPart(&pt->t, t);
+ 
+ #ifndef YAFFS_IGNORE_TAGS_ECC
+ 	{
+@@ -101,82 +109,98 @@ void yaffs_PackTags2(yaffs_PackedTags2 *
+ #endif
+ }
+ 
+-void yaffs_UnpackTags2(yaffs_ExtendedTags * t, yaffs_PackedTags2 * pt)
++
++void yaffs_UnpackTags2TagsPart(yaffs_ExtendedTags *t,
++		yaffs_PackedTags2TagsPart *ptt)
+ {
+ 
+ 	memset(t, 0, sizeof(yaffs_ExtendedTags));
+ 
+ 	yaffs_InitialiseTags(t);
+ 
+-	if (pt->t.sequenceNumber != 0xFFFFFFFF) {
+-		/* Page is in use */
+-#ifdef YAFFS_IGNORE_TAGS_ECC
+-		{
+-			t->eccResult = YAFFS_ECC_RESULT_NO_ERROR;
+-		}
+-#else
+-		{
+-			yaffs_ECCOther ecc;
+-			int result;
+-			yaffs_ECCCalculateOther((unsigned char *)&pt->t,
+-						sizeof
+-						(yaffs_PackedTags2TagsPart),
+-						&ecc);
+-			result =
+-			    yaffs_ECCCorrectOther((unsigned char *)&pt->t,
+-						  sizeof
+-						  (yaffs_PackedTags2TagsPart),
+-						  &pt->ecc, &ecc);
+-			switch(result){
+-				case 0:
+-					t->eccResult = YAFFS_ECC_RESULT_NO_ERROR;
+-					break;
+-				case 1:
+-					t->eccResult = YAFFS_ECC_RESULT_FIXED;
+-					break;
+-				case -1:
+-					t->eccResult = YAFFS_ECC_RESULT_UNFIXED;
+-					break;
+-				default:
+-					t->eccResult = YAFFS_ECC_RESULT_UNKNOWN;
+-			}
+-		}
+-#endif
++	if (ptt->sequenceNumber != 0xFFFFFFFF) {
+ 		t->blockBad = 0;
+ 		t->chunkUsed = 1;
+-		t->objectId = pt->t.objectId;
+-		t->chunkId = pt->t.chunkId;
+-		t->byteCount = pt->t.byteCount;
++		t->objectId = ptt->objectId;
++		t->chunkId = ptt->chunkId;
++		t->byteCount = ptt->byteCount;
+ 		t->chunkDeleted = 0;
+ 		t->serialNumber = 0;
+-		t->sequenceNumber = pt->t.sequenceNumber;
++		t->sequenceNumber = ptt->sequenceNumber;
+ 
+ 		/* Do extra header info stuff */
+ 
+-		if (pt->t.chunkId & EXTRA_HEADER_INFO_FLAG) {
++		if (ptt->chunkId & EXTRA_HEADER_INFO_FLAG) {
+ 			t->chunkId = 0;
+ 			t->byteCount = 0;
+ 
+ 			t->extraHeaderInfoAvailable = 1;
+ 			t->extraParentObjectId =
+-			    pt->t.chunkId & (~(ALL_EXTRA_FLAGS));
++			    ptt->chunkId & (~(ALL_EXTRA_FLAGS));
+ 			t->extraIsShrinkHeader =
+-			    (pt->t.chunkId & EXTRA_SHRINK_FLAG) ? 1 : 0;
++			    (ptt->chunkId & EXTRA_SHRINK_FLAG) ? 1 : 0;
+ 			t->extraShadows =
+-			    (pt->t.chunkId & EXTRA_SHADOWS_FLAG) ? 1 : 0;
++			    (ptt->chunkId & EXTRA_SHADOWS_FLAG) ? 1 : 0;
+ 			t->extraObjectType =
+-			    pt->t.objectId >> EXTRA_OBJECT_TYPE_SHIFT;
++			    ptt->objectId >> EXTRA_OBJECT_TYPE_SHIFT;
+ 			t->objectId &= ~EXTRA_OBJECT_TYPE_MASK;
+ 
+-			if (t->extraObjectType == YAFFS_OBJECT_TYPE_HARDLINK) {
+-				t->extraEquivalentObjectId = pt->t.byteCount;
+-			} else {
+-				t->extraFileLength = pt->t.byteCount;
++			if (t->extraObjectType == YAFFS_OBJECT_TYPE_HARDLINK)
++				t->extraEquivalentObjectId = ptt->byteCount;
++			else
++				t->extraFileLength = ptt->byteCount;
++		}
++	}
++
++	yaffs_DumpPackedTags2TagsPart(ptt);
++	yaffs_DumpTags2(t);
++
++}
++
++
++void yaffs_UnpackTags2(yaffs_ExtendedTags *t, yaffs_PackedTags2 *pt)
++{
++
++	yaffs_ECCResult eccResult = YAFFS_ECC_RESULT_NO_ERROR;
++
++	if (pt->t.sequenceNumber != 0xFFFFFFFF) {
++		/* Page is in use */
++#ifndef YAFFS_IGNORE_TAGS_ECC
++		{
++			yaffs_ECCOther ecc;
++			int result;
++			yaffs_ECCCalculateOther((unsigned char *)&pt->t,
++						sizeof
++						(yaffs_PackedTags2TagsPart),
++						&ecc);
++			result =
++			    yaffs_ECCCorrectOther((unsigned char *)&pt->t,
++						  sizeof
++						  (yaffs_PackedTags2TagsPart),
++						  &pt->ecc, &ecc);
++			switch (result) {
++			case 0:
++				eccResult = YAFFS_ECC_RESULT_NO_ERROR;
++				break;
++			case 1:
++				eccResult = YAFFS_ECC_RESULT_FIXED;
++				break;
++			case -1:
++				eccResult = YAFFS_ECC_RESULT_UNFIXED;
++				break;
++			default:
++				eccResult = YAFFS_ECC_RESULT_UNKNOWN;
+ 			}
+ 		}
++#endif
+ 	}
+ 
++	yaffs_UnpackTags2TagsPart(t, &pt->t);
++
++	t->eccResult = eccResult;
++
+ 	yaffs_DumpPackedTags2(pt);
+ 	yaffs_DumpTags2(t);
+ 
+ }
++
+--- a/fs/yaffs2/yaffs_packedtags2.h
++++ b/fs/yaffs2/yaffs_packedtags2.h
+@@ -33,6 +33,11 @@ typedef struct {
+ 	yaffs_ECCOther ecc;
+ } yaffs_PackedTags2;
+ 
+-void yaffs_PackTags2(yaffs_PackedTags2 * pt, const yaffs_ExtendedTags * t);
+-void yaffs_UnpackTags2(yaffs_ExtendedTags * t, yaffs_PackedTags2 * pt);
++/* Full packed tags with ECC, used for oob tags */
++void yaffs_PackTags2(yaffs_PackedTags2 *pt, const yaffs_ExtendedTags *t);
++void yaffs_UnpackTags2(yaffs_ExtendedTags *t, yaffs_PackedTags2 *pt);
++
++/* Only the tags part (no ECC for use with inband tags */
++void yaffs_PackTags2TagsPart(yaffs_PackedTags2TagsPart *pt, const yaffs_ExtendedTags *t);
++void yaffs_UnpackTags2TagsPart(yaffs_ExtendedTags *t, yaffs_PackedTags2TagsPart *pt);
+ #endif
+--- a/fs/yaffs2/yaffs_qsort.c
++++ b/fs/yaffs2/yaffs_qsort.c
+@@ -28,12 +28,12 @@
+  */
+ 
+ #include "yportenv.h"
+-//#include <linux/string.h>
++/* #include <linux/string.h> */
+ 
+ /*
+  * Qsort routine from Bentley & McIlroy's "Engineering a Sort Function".
+  */
+-#define swapcode(TYPE, parmi, parmj, n) { 		\
++#define swapcode(TYPE, parmi, parmj, n) do { 		\
+ 	long i = (n) / sizeof (TYPE); 			\
+ 	register TYPE *pi = (TYPE *) (parmi); 		\
+ 	register TYPE *pj = (TYPE *) (parmj); 		\
+@@ -41,28 +41,29 @@
+ 		register TYPE	t = *pi;		\
+ 		*pi++ = *pj;				\
+ 		*pj++ = t;				\
+-        } while (--i > 0);				\
+-}
++	} while (--i > 0);				\
++} while (0)
+ 
+ #define SWAPINIT(a, es) swaptype = ((char *)a - (char *)0) % sizeof(long) || \
+-	es % sizeof(long) ? 2 : es == sizeof(long)? 0 : 1;
++	es % sizeof(long) ? 2 : es == sizeof(long) ? 0 : 1;
+ 
+ static __inline void
+ swapfunc(char *a, char *b, int n, int swaptype)
+ {
+ 	if (swaptype <= 1)
+-		swapcode(long, a, b, n)
++		swapcode(long, a, b, n);
+ 	else
+-		swapcode(char, a, b, n)
++		swapcode(char, a, b, n);
+ }
+ 
+-#define swap(a, b)					\
++#define yswap(a, b) do {					\
+ 	if (swaptype == 0) {				\
+ 		long t = *(long *)(a);			\
+ 		*(long *)(a) = *(long *)(b);		\
+ 		*(long *)(b) = t;			\
+ 	} else						\
+-		swapfunc(a, b, es, swaptype)
++		swapfunc(a, b, es, swaptype);		\
++} while (0)
+ 
+ #define vecswap(a, b, n) 	if ((n) > 0) swapfunc(a, b, n, swaptype)
+ 
+@@ -70,12 +71,12 @@ static __inline char *
+ med3(char *a, char *b, char *c, int (*cmp)(const void *, const void *))
+ {
+ 	return cmp(a, b) < 0 ?
+-	       (cmp(b, c) < 0 ? b : (cmp(a, c) < 0 ? c : a ))
+-              :(cmp(b, c) > 0 ? b : (cmp(a, c) < 0 ? a : c ));
++		(cmp(b, c) < 0 ? b : (cmp(a, c) < 0 ? c : a))
++		: (cmp(b, c) > 0 ? b : (cmp(a, c) < 0 ? a : c));
+ }
+ 
+ #ifndef min
+-#define min(a,b) (((a) < (b)) ? (a) : (b))
++#define min(a, b) (((a) < (b)) ? (a) : (b))
+ #endif
+ 
+ void
+@@ -92,7 +93,7 @@ loop:	SWAPINIT(a, es);
+ 		for (pm = (char *)a + es; pm < (char *) a + n * es; pm += es)
+ 			for (pl = pm; pl > (char *) a && cmp(pl - es, pl) > 0;
+ 			     pl -= es)
+-				swap(pl, pl - es);
++				yswap(pl, pl - es);
+ 		return;
+ 	}
+ 	pm = (char *)a + (n / 2) * es;
+@@ -107,7 +108,7 @@ loop:	SWAPINIT(a, es);
+ 		}
+ 		pm = med3(pl, pm, pn, cmp);
+ 	}
+-	swap(a, pm);
++	yswap(a, pm);
+ 	pa = pb = (char *)a + es;
+ 
+ 	pc = pd = (char *)a + (n - 1) * es;
+@@ -115,7 +116,7 @@ loop:	SWAPINIT(a, es);
+ 		while (pb <= pc && (r = cmp(pb, a)) <= 0) {
+ 			if (r == 0) {
+ 				swap_cnt = 1;
+-				swap(pa, pb);
++				yswap(pa, pb);
+ 				pa += es;
+ 			}
+ 			pb += es;
+@@ -123,14 +124,14 @@ loop:	SWAPINIT(a, es);
+ 		while (pb <= pc && (r = cmp(pc, a)) >= 0) {
+ 			if (r == 0) {
+ 				swap_cnt = 1;
+-				swap(pc, pd);
++				yswap(pc, pd);
+ 				pd -= es;
+ 			}
+ 			pc -= es;
+ 		}
+ 		if (pb > pc)
+ 			break;
+-		swap(pb, pc);
++		yswap(pb, pc);
+ 		swap_cnt = 1;
+ 		pb += es;
+ 		pc -= es;
+@@ -139,7 +140,7 @@ loop:	SWAPINIT(a, es);
+ 		for (pm = (char *) a + es; pm < (char *) a + n * es; pm += es)
+ 			for (pl = pm; pl > (char *) a && cmp(pl - es, pl) > 0;
+ 			     pl -= es)
+-				swap(pl, pl - es);
++				yswap(pl, pl - es);
+ 		return;
+ 	}
+ 
+@@ -148,9 +149,11 @@ loop:	SWAPINIT(a, es);
+ 	vecswap(a, pb - r, r);
+ 	r = min((long)(pd - pc), (long)(pn - pd - es));
+ 	vecswap(pb, pn - r, r);
+-	if ((r = pb - pa) > es)
++	r = pb - pa;
++	if (r > es)
+ 		yaffs_qsort(a, r / es, es, cmp);
+-	if ((r = pd - pc) > es) {
++	r = pd - pc;
++	if (r > es) {
+ 		/* Iterate rather than recurse to save stack space */
+ 		a = pn - r;
+ 		n = r / es;
+--- a/fs/yaffs2/yaffs_qsort.h
++++ b/fs/yaffs2/yaffs_qsort.h
+@@ -17,7 +17,7 @@
+ #ifndef __YAFFS_QSORT_H__
+ #define __YAFFS_QSORT_H__
+ 
+-extern void yaffs_qsort (void *const base, size_t total_elems, size_t size,
+-                   int (*cmp)(const void *, const void *));
++extern void yaffs_qsort(void *const base, size_t total_elems, size_t size,
++			int (*cmp)(const void *, const void *));
+ 
+ #endif
+--- a/fs/yaffs2/yaffs_tagscompat.c
++++ b/fs/yaffs2/yaffs_tagscompat.c
+@@ -14,16 +14,17 @@
+ #include "yaffs_guts.h"
+ #include "yaffs_tagscompat.h"
+ #include "yaffs_ecc.h"
++#include "yaffs_getblockinfo.h"
+ 
+-static void yaffs_HandleReadDataError(yaffs_Device * dev, int chunkInNAND);
++static void yaffs_HandleReadDataError(yaffs_Device *dev, int chunkInNAND);
+ #ifdef NOTYET
+-static void yaffs_CheckWrittenBlock(yaffs_Device * dev, int chunkInNAND);
+-static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+-				     const __u8 * data,
+-				     const yaffs_Spare * spare);
+-static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+-				    const yaffs_Spare * spare);
+-static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND);
++static void yaffs_CheckWrittenBlock(yaffs_Device *dev, int chunkInNAND);
++static void yaffs_HandleWriteChunkOk(yaffs_Device *dev, int chunkInNAND,
++				     const __u8 *data,
++				     const yaffs_Spare *spare);
++static void yaffs_HandleUpdateChunk(yaffs_Device *dev, int chunkInNAND,
++				    const yaffs_Spare *spare);
++static void yaffs_HandleWriteChunkError(yaffs_Device *dev, int chunkInNAND);
+ #endif
+ 
+ static const char yaffs_countBitsTable[256] = {
+@@ -54,13 +55,13 @@ int yaffs_CountBits(__u8 x)
+ 
+ /********** Tags ECC calculations  *********/
+ 
+-void yaffs_CalcECC(const __u8 * data, yaffs_Spare * spare)
++void yaffs_CalcECC(const __u8 *data, yaffs_Spare *spare)
+ {
+ 	yaffs_ECCCalculate(data, spare->ecc1);
+ 	yaffs_ECCCalculate(&data[256], spare->ecc2);
+ }
+ 
+-void yaffs_CalcTagsECC(yaffs_Tags * tags)
++void yaffs_CalcTagsECC(yaffs_Tags *tags)
+ {
+ 	/* Calculate an ecc */
+ 
+@@ -74,9 +75,8 @@ void yaffs_CalcTagsECC(yaffs_Tags * tags
+ 	for (i = 0; i < 8; i++) {
+ 		for (j = 1; j & 0xff; j <<= 1) {
+ 			bit++;
+-			if (b[i] & j) {
++			if (b[i] & j)
+ 				ecc ^= bit;
+-			}
+ 		}
+ 	}
+ 
+@@ -84,7 +84,7 @@ void yaffs_CalcTagsECC(yaffs_Tags * tags
+ 
+ }
+ 
+-int yaffs_CheckECCOnTags(yaffs_Tags * tags)
++int yaffs_CheckECCOnTags(yaffs_Tags *tags)
+ {
+ 	unsigned ecc = tags->ecc;
+ 
+@@ -115,8 +115,8 @@ int yaffs_CheckECCOnTags(yaffs_Tags * ta
+ 
+ /********** Tags **********/
+ 
+-static void yaffs_LoadTagsIntoSpare(yaffs_Spare * sparePtr,
+-				    yaffs_Tags * tagsPtr)
++static void yaffs_LoadTagsIntoSpare(yaffs_Spare *sparePtr,
++				yaffs_Tags *tagsPtr)
+ {
+ 	yaffs_TagsUnion *tu = (yaffs_TagsUnion *) tagsPtr;
+ 
+@@ -132,8 +132,8 @@ static void yaffs_LoadTagsIntoSpare(yaff
+ 	sparePtr->tagByte7 = tu->asBytes[7];
+ }
+ 
+-static void yaffs_GetTagsFromSpare(yaffs_Device * dev, yaffs_Spare * sparePtr,
+-				   yaffs_Tags * tagsPtr)
++static void yaffs_GetTagsFromSpare(yaffs_Device *dev, yaffs_Spare *sparePtr,
++				yaffs_Tags *tagsPtr)
+ {
+ 	yaffs_TagsUnion *tu = (yaffs_TagsUnion *) tagsPtr;
+ 	int result;
+@@ -148,21 +148,20 @@ static void yaffs_GetTagsFromSpare(yaffs
+ 	tu->asBytes[7] = sparePtr->tagByte7;
+ 
+ 	result = yaffs_CheckECCOnTags(tagsPtr);
+-	if (result > 0) {
++	if (result > 0)
+ 		dev->tagsEccFixed++;
+-	} else if (result < 0) {
++	else if (result < 0)
+ 		dev->tagsEccUnfixed++;
+-	}
+ }
+ 
+-static void yaffs_SpareInitialise(yaffs_Spare * spare)
++static void yaffs_SpareInitialise(yaffs_Spare *spare)
+ {
+ 	memset(spare, 0xFF, sizeof(yaffs_Spare));
+ }
+ 
+ static int yaffs_WriteChunkToNAND(struct yaffs_DeviceStruct *dev,
+-				  int chunkInNAND, const __u8 * data,
+-				  yaffs_Spare * spare)
++				int chunkInNAND, const __u8 *data,
++				yaffs_Spare *spare)
+ {
+ 	if (chunkInNAND < dev->startBlock * dev->nChunksPerBlock) {
+ 		T(YAFFS_TRACE_ERROR,
+@@ -177,9 +176,9 @@ static int yaffs_WriteChunkToNAND(struct
+ 
+ static int yaffs_ReadChunkFromNAND(struct yaffs_DeviceStruct *dev,
+ 				   int chunkInNAND,
+-				   __u8 * data,
+-				   yaffs_Spare * spare,
+-				   yaffs_ECCResult * eccResult,
++				   __u8 *data,
++				   yaffs_Spare *spare,
++				   yaffs_ECCResult *eccResult,
+ 				   int doErrorCorrection)
+ {
+ 	int retVal;
+@@ -252,9 +251,11 @@ static int yaffs_ReadChunkFromNAND(struc
+ 		/* Must allocate enough memory for spare+2*sizeof(int) */
+ 		/* for ecc results from device. */
+ 		struct yaffs_NANDSpare nspare;
+-		retVal =
+-		    dev->readChunkFromNAND(dev, chunkInNAND, data,
+-					   (yaffs_Spare *) & nspare);
++
++		memset(&nspare, 0, sizeof(nspare));
++
++		retVal = dev->readChunkFromNAND(dev, chunkInNAND, data,
++					(yaffs_Spare *) &nspare);
+ 		memcpy(spare, &nspare, sizeof(yaffs_Spare));
+ 		if (data && doErrorCorrection) {
+ 			if (nspare.eccres1 > 0) {
+@@ -302,8 +303,7 @@ static int yaffs_ReadChunkFromNAND(struc
+ static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev,
+ 				  int chunkInNAND)
+ {
+-
+-	static int init = 0;
++	static int init;
+ 	static __u8 cmpbuf[YAFFS_BYTES_PER_CHUNK];
+ 	static __u8 data[YAFFS_BYTES_PER_CHUNK];
+ 	/* Might as well always allocate the larger size for */
+@@ -331,12 +331,12 @@ static int yaffs_CheckChunkErased(struct
+  * Functions for robustisizing
+  */
+ 
+-static void yaffs_HandleReadDataError(yaffs_Device * dev, int chunkInNAND)
++static void yaffs_HandleReadDataError(yaffs_Device *dev, int chunkInNAND)
+ {
+ 	int blockInNAND = chunkInNAND / dev->nChunksPerBlock;
+ 
+ 	/* Mark the block for retirement */
+-	yaffs_GetBlockInfo(dev, blockInNAND)->needsRetiring = 1;
++	yaffs_GetBlockInfo(dev, blockInNAND + dev->blockOffset)->needsRetiring = 1;
+ 	T(YAFFS_TRACE_ERROR | YAFFS_TRACE_BAD_BLOCKS,
+ 	  (TSTR("**>>Block %d marked for retirement" TENDSTR), blockInNAND));
+ 
+@@ -348,22 +348,22 @@ static void yaffs_HandleReadDataError(ya
+ }
+ 
+ #ifdef NOTYET
+-static void yaffs_CheckWrittenBlock(yaffs_Device * dev, int chunkInNAND)
++static void yaffs_CheckWrittenBlock(yaffs_Device *dev, int chunkInNAND)
+ {
+ }
+ 
+-static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+-				     const __u8 * data,
+-				     const yaffs_Spare * spare)
++static void yaffs_HandleWriteChunkOk(yaffs_Device *dev, int chunkInNAND,
++				     const __u8 *data,
++				     const yaffs_Spare *spare)
+ {
+ }
+ 
+-static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+-				    const yaffs_Spare * spare)
++static void yaffs_HandleUpdateChunk(yaffs_Device *dev, int chunkInNAND,
++				    const yaffs_Spare *spare)
+ {
+ }
+ 
+-static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND)
++static void yaffs_HandleWriteChunkError(yaffs_Device *dev, int chunkInNAND)
+ {
+ 	int blockInNAND = chunkInNAND / dev->nChunksPerBlock;
+ 
+@@ -373,8 +373,8 @@ static void yaffs_HandleWriteChunkError(
+ 	yaffs_DeleteChunk(dev, chunkInNAND, 1, __LINE__);
+ }
+ 
+-static int yaffs_VerifyCompare(const __u8 * d0, const __u8 * d1,
+-			       const yaffs_Spare * s0, const yaffs_Spare * s1)
++static int yaffs_VerifyCompare(const __u8 *d0, const __u8 *d1,
++			       const yaffs_Spare *s0, const yaffs_Spare *s1)
+ {
+ 
+ 	if (memcmp(d0, d1, YAFFS_BYTES_PER_CHUNK) != 0 ||
+@@ -398,28 +398,35 @@ static int yaffs_VerifyCompare(const __u
+ }
+ #endif				/* NOTYET */
+ 
+-int yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(yaffs_Device * dev,
+-						    int chunkInNAND,
+-						    const __u8 * data,
+-						    const yaffs_ExtendedTags *
+-						    eTags)
++int yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(yaffs_Device *dev,
++						int chunkInNAND,
++						const __u8 *data,
++						const yaffs_ExtendedTags *eTags)
+ {
+ 	yaffs_Spare spare;
+ 	yaffs_Tags tags;
+ 
+ 	yaffs_SpareInitialise(&spare);
+ 
+-	if (eTags->chunkDeleted) {
++	if (eTags->chunkDeleted)
+ 		spare.pageStatus = 0;
+-	} else {
++	else {
+ 		tags.objectId = eTags->objectId;
+ 		tags.chunkId = eTags->chunkId;
+-		tags.byteCount = eTags->byteCount;
++
++		tags.byteCountLSB = eTags->byteCount & 0x3ff;
++
++		if (dev->nDataBytesPerChunk >= 1024)
++			tags.byteCountMSB = (eTags->byteCount >> 10) & 3;
++		else
++			tags.byteCountMSB = 3;
++
++
+ 		tags.serialNumber = eTags->serialNumber;
+ 
+-		if (!dev->useNANDECC && data) {
++		if (!dev->useNANDECC && data)
+ 			yaffs_CalcECC(data, &spare);
+-		}
++
+ 		yaffs_LoadTagsIntoSpare(&spare, &tags);
+ 
+ 	}
+@@ -427,15 +434,15 @@ int yaffs_TagsCompatabilityWriteChunkWit
+ 	return yaffs_WriteChunkToNAND(dev, chunkInNAND, data, &spare);
+ }
+ 
+-int yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(yaffs_Device * dev,
++int yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(yaffs_Device *dev,
+ 						     int chunkInNAND,
+-						     __u8 * data,
+-						     yaffs_ExtendedTags * eTags)
++						     __u8 *data,
++						     yaffs_ExtendedTags *eTags)
+ {
+ 
+ 	yaffs_Spare spare;
+ 	yaffs_Tags tags;
+-	yaffs_ECCResult eccResult;
++	yaffs_ECCResult eccResult = YAFFS_ECC_RESULT_UNKNOWN;
+ 
+ 	static yaffs_Spare spareFF;
+ 	static int init;
+@@ -466,7 +473,11 @@ int yaffs_TagsCompatabilityReadChunkWith
+ 
+ 				eTags->objectId = tags.objectId;
+ 				eTags->chunkId = tags.chunkId;
+-				eTags->byteCount = tags.byteCount;
++				eTags->byteCount = tags.byteCountLSB;
++
++				if (dev->nDataBytesPerChunk >= 1024)
++					eTags->byteCount |= (((unsigned) tags.byteCountMSB) << 10);
++
+ 				eTags->serialNumber = tags.serialNumber;
+ 			}
+ 		}
+@@ -497,9 +508,9 @@ int yaffs_TagsCompatabilityMarkNANDBlock
+ }
+ 
+ int yaffs_TagsCompatabilityQueryNANDBlock(struct yaffs_DeviceStruct *dev,
+-					  int blockNo, yaffs_BlockState *
+-					  state,
+-					  int *sequenceNumber)
++					  int blockNo,
++					  yaffs_BlockState *state,
++					  __u32 *sequenceNumber)
+ {
+ 
+ 	yaffs_Spare spare0, spare1;
+--- a/fs/yaffs2/yaffs_tagscompat.h
++++ b/fs/yaffs2/yaffs_tagscompat.h
+@@ -17,24 +17,23 @@
+ #define __YAFFS_TAGSCOMPAT_H__
+ 
+ #include "yaffs_guts.h"
+-int yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(yaffs_Device * dev,
+-						    int chunkInNAND,
+-						    const __u8 * data,
+-						    const yaffs_ExtendedTags *
+-						    tags);
+-int yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(yaffs_Device * dev,
+-						     int chunkInNAND,
+-						     __u8 * data,
+-						     yaffs_ExtendedTags *
+-						     tags);
++int yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(yaffs_Device *dev,
++						int chunkInNAND,
++						const __u8 *data,
++						const yaffs_ExtendedTags *tags);
++int yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(yaffs_Device *dev,
++						int chunkInNAND,
++						__u8 *data,
++						yaffs_ExtendedTags *tags);
+ int yaffs_TagsCompatabilityMarkNANDBlockBad(struct yaffs_DeviceStruct *dev,
+ 					    int blockNo);
+ int yaffs_TagsCompatabilityQueryNANDBlock(struct yaffs_DeviceStruct *dev,
+-					  int blockNo, yaffs_BlockState *
+-					  state, int *sequenceNumber);
++					  int blockNo,
++					  yaffs_BlockState *state,
++					  __u32 *sequenceNumber);
+ 
+-void yaffs_CalcTagsECC(yaffs_Tags * tags);
+-int yaffs_CheckECCOnTags(yaffs_Tags * tags);
++void yaffs_CalcTagsECC(yaffs_Tags *tags);
++int yaffs_CheckECCOnTags(yaffs_Tags *tags);
+ int yaffs_CountBits(__u8 byte);
+ 
+ #endif
+--- a/fs/yaffs2/yaffs_tagsvalidity.c
++++ b/fs/yaffs2/yaffs_tagsvalidity.c
+@@ -13,14 +13,14 @@
+ 
+ #include "yaffs_tagsvalidity.h"
+ 
+-void yaffs_InitialiseTags(yaffs_ExtendedTags * tags)
++void yaffs_InitialiseTags(yaffs_ExtendedTags *tags)
+ {
+ 	memset(tags, 0, sizeof(yaffs_ExtendedTags));
+ 	tags->validMarker0 = 0xAAAAAAAA;
+ 	tags->validMarker1 = 0x55555555;
+ }
+ 
+-int yaffs_ValidateTags(yaffs_ExtendedTags * tags)
++int yaffs_ValidateTags(yaffs_ExtendedTags *tags)
+ {
+ 	return (tags->validMarker0 == 0xAAAAAAAA &&
+ 		tags->validMarker1 == 0x55555555);
+--- a/fs/yaffs2/yaffs_tagsvalidity.h
++++ b/fs/yaffs2/yaffs_tagsvalidity.h
+@@ -19,6 +19,6 @@
+ 
+ #include "yaffs_guts.h"
+ 
+-void yaffs_InitialiseTags(yaffs_ExtendedTags * tags);
+-int yaffs_ValidateTags(yaffs_ExtendedTags * tags);
++void yaffs_InitialiseTags(yaffs_ExtendedTags *tags);
++int yaffs_ValidateTags(yaffs_ExtendedTags *tags);
+ #endif
+--- a/fs/yaffs2/yportenv.h
++++ b/fs/yaffs2/yportenv.h
+@@ -17,17 +17,28 @@
+ #ifndef __YPORTENV_H__
+ #define __YPORTENV_H__
+ 
++/*
++ * Define the MTD version in terms of Linux Kernel versions
++ * This allows yaffs to be used independantly of the kernel
++ * as well as with it.
++ */
++
++#define MTD_VERSION(a, b, c) (((a) << 16) + ((b) << 8) + (c))
++
+ #if defined CONFIG_YAFFS_WINCE
+ 
+ #include "ywinceenv.h"
+ 
+-#elif  defined __KERNEL__
++#elif defined __KERNEL__
+ 
+ #include "moduleconfig.h"
+ 
+ /* Linux kernel */
++
+ #include <linux/version.h>
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19))
++#define MTD_VERSION_CODE LINUX_VERSION_CODE
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 19))
+ #include <linux/config.h>
+ #endif
+ #include <linux/kernel.h>
+@@ -40,12 +51,13 @@
+ #define YCHAR char
+ #define YUCHAR unsigned char
+ #define _Y(x)     x
+-#define yaffs_strcpy(a,b)    strcpy(a,b)
+-#define yaffs_strncpy(a,b,c) strncpy(a,b,c)
+-#define yaffs_strncmp(a,b,c) strncmp(a,b,c)
+-#define yaffs_strlen(s)	     strlen(s)
+-#define yaffs_sprintf	     sprintf
+-#define yaffs_toupper(a)     toupper(a)
++#define yaffs_strcat(a, b)     strcat(a, b)
++#define yaffs_strcpy(a, b)     strcpy(a, b)
++#define yaffs_strncpy(a, b, c) strncpy(a, b, c)
++#define yaffs_strncmp(a, b, c) strncmp(a, b, c)
++#define yaffs_strlen(s)	       strlen(s)
++#define yaffs_sprintf	       sprintf
++#define yaffs_toupper(a)       toupper(a)
+ 
+ #define Y_INLINE inline
+ 
+@@ -53,19 +65,19 @@
+ #define YAFFS_LOSTNFOUND_PREFIX		"obj"
+ 
+ /* #define YPRINTF(x) printk x */
+-#define YMALLOC(x) kmalloc(x,GFP_KERNEL)
++#define YMALLOC(x) kmalloc(x, GFP_NOFS)
+ #define YFREE(x)   kfree(x)
+ #define YMALLOC_ALT(x) vmalloc(x)
+ #define YFREE_ALT(x)   vfree(x)
+ #define YMALLOC_DMA(x) YMALLOC(x)
+ 
+-// KR - added for use in scan so processes aren't blocked indefinitely.
++/* KR - added for use in scan so processes aren't blocked indefinitely. */
+ #define YYIELD() schedule()
+ 
+ #define YAFFS_ROOT_MODE			0666
+ #define YAFFS_LOSTNFOUND_MODE		0666
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ #define Y_CURRENT_TIME CURRENT_TIME.tv_sec
+ #define Y_TIME_CONVERT(x) (x).tv_sec
+ #else
+@@ -73,11 +85,12 @@
+ #define Y_TIME_CONVERT(x) (x)
+ #endif
+ 
+-#define yaffs_SumCompare(x,y) ((x) == (y))
+-#define yaffs_strcmp(a,b) strcmp(a,b)
++#define yaffs_SumCompare(x, y) ((x) == (y))
++#define yaffs_strcmp(a, b) strcmp(a, b)
+ 
+ #define TENDSTR "\n"
+ #define TSTR(x) KERN_WARNING x
++#define TCONT(x) x
+ #define TOUT(p) printk p
+ 
+ #define yaffs_trace(mask, fmt, args...) \
+@@ -90,6 +103,8 @@
+ 
+ #elif defined CONFIG_YAFFS_DIRECT
+ 
++#define MTD_VERSION_CODE MTD_VERSION(2, 6, 22)
++
+ /* Direct interface */
+ #include "ydirectenv.h"
+ 
+@@ -111,11 +126,12 @@
+ #define YCHAR char
+ #define YUCHAR unsigned char
+ #define _Y(x)     x
+-#define yaffs_strcpy(a,b)    strcpy(a,b)
+-#define yaffs_strncpy(a,b,c) strncpy(a,b,c)
+-#define yaffs_strlen(s)	     strlen(s)
+-#define yaffs_sprintf	     sprintf
+-#define yaffs_toupper(a)     toupper(a)
++#define yaffs_strcat(a, b)     strcat(a, b)
++#define yaffs_strcpy(a, b)     strcpy(a, b)
++#define yaffs_strncpy(a, b, c) strncpy(a, b, c)
++#define yaffs_strlen(s)	       strlen(s)
++#define yaffs_sprintf	       sprintf
++#define yaffs_toupper(a)       toupper(a)
+ 
+ #define Y_INLINE inline
+ 
+@@ -133,8 +149,8 @@
+ #define YAFFS_ROOT_MODE				0666
+ #define YAFFS_LOSTNFOUND_MODE		0666
+ 
+-#define yaffs_SumCompare(x,y) ((x) == (y))
+-#define yaffs_strcmp(a,b) strcmp(a,b)
++#define yaffs_SumCompare(x, y) ((x) == (y))
++#define yaffs_strcmp(a, b) strcmp(a, b)
+ 
+ #else
+ /* Should have specified a configuration type */
+@@ -178,10 +194,10 @@ extern unsigned int yaffs_wr_attempts;
+ #define YAFFS_TRACE_ALWAYS		0xF0000000
+ 
+ 
+-#define T(mask,p) do{ if((mask) & (yaffs_traceMask | YAFFS_TRACE_ALWAYS)) TOUT(p);} while(0)
++#define T(mask, p) do { if ((mask) & (yaffs_traceMask | YAFFS_TRACE_ALWAYS)) TOUT(p); } while (0)
+ 
+-#ifndef CONFIG_YAFFS_WINCE
+-#define YBUG() T(YAFFS_TRACE_BUG,(TSTR("==>> yaffs bug: " __FILE__ " %d" TENDSTR),__LINE__))
++#ifndef YBUG
++#define YBUG() do {T(YAFFS_TRACE_BUG, (TSTR("==>> yaffs bug: " __FILE__ " %d" TENDSTR), __LINE__)); } while (0)
+ #endif
+ 
+ #endif
diff --git a/target/linux/generic/patches-2.6.34/600-phy_extension.patch b/target/linux/generic/patches-2.6.34/600-phy_extension.patch
new file mode 100644
index 0000000000..7ae6d2ab00
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/600-phy_extension.patch
@@ -0,0 +1,81 @@
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -298,6 +298,50 @@ int phy_ethtool_gset(struct phy_device *
+ }
+ EXPORT_SYMBOL(phy_ethtool_gset);
+ 
++int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr)
++{
++	u32 cmd;
++	int tmp;
++	struct ethtool_cmd ecmd = { ETHTOOL_GSET };
++	struct ethtool_value edata = { ETHTOOL_GLINK };
++
++	if (get_user(cmd, (u32 *) useraddr))
++		return -EFAULT;
++
++	switch (cmd) {
++	case ETHTOOL_GSET:
++		phy_ethtool_gset(phydev, &ecmd);
++		if (copy_to_user(useraddr, &ecmd, sizeof(ecmd)))
++			return -EFAULT;
++		return 0;
++
++	case ETHTOOL_SSET:
++		if (copy_from_user(&ecmd, useraddr, sizeof(ecmd)))
++			return -EFAULT;
++		return phy_ethtool_sset(phydev, &ecmd);
++
++	case ETHTOOL_NWAY_RST:
++		/* if autoneg is off, it's an error */
++		tmp = phy_read(phydev, MII_BMCR);
++		if (tmp & BMCR_ANENABLE) {
++			tmp |= (BMCR_ANRESTART);
++			phy_write(phydev, MII_BMCR, tmp);
++			return 0;
++		}
++		return -EINVAL;
++
++	case ETHTOOL_GLINK:
++		edata.data = (phy_read(phydev,
++				MII_BMSR) & BMSR_LSTATUS) ? 1 : 0;
++		if (copy_to_user(useraddr, &edata, sizeof(edata)))
++			return -EFAULT;
++		return 0;
++	}
++
++	return -EOPNOTSUPP;
++}
++EXPORT_SYMBOL(phy_ethtool_ioctl);
++
+ /**
+  * phy_mii_ioctl - generic PHY MII ioctl interface
+  * @phydev: the phy_device struct
+@@ -351,7 +395,7 @@ int phy_mii_ioctl(struct phy_device *phy
+ 		}
+ 
+ 		phy_write(phydev, mii_data->reg_num, val);
+-		
++
+ 		if (mii_data->reg_num == MII_BMCR &&
+ 		    val & BMCR_RESET &&
+ 		    phydev->drv->config_init) {
+@@ -465,7 +509,7 @@ static void phy_force_reduction(struct p
+ 	int idx;
+ 
+ 	idx = phy_find_setting(phydev->speed, phydev->duplex);
+-	
++
+ 	idx++;
+ 
+ 	idx = phy_find_valid(idx, phydev->supported);
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -492,6 +492,7 @@ void phy_start_machine(struct phy_device
+ void phy_stop_machine(struct phy_device *phydev);
+ int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
+ int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
++int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr);
+ int phy_mii_ioctl(struct phy_device *phydev,
+ 		struct mii_ioctl_data *mii_data, int cmd);
+ int phy_start_interrupts(struct phy_device *phydev);
diff --git a/target/linux/generic/patches-2.6.34/601-phy-add-aneg-done-function.patch b/target/linux/generic/patches-2.6.34/601-phy-add-aneg-done-function.patch
new file mode 100644
index 0000000000..8f939a5b7b
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/601-phy-add-aneg-done-function.patch
@@ -0,0 +1,45 @@
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -379,9 +379,18 @@ struct phy_driver {
+ 	 */
+ 	int (*config_aneg)(struct phy_device *phydev);
+ 
++	/* Determine if autonegotiation is done */
++	int (*aneg_done)(struct phy_device *phydev);
++
+ 	/* Determines the negotiated speed and duplex */
+ 	int (*read_status)(struct phy_device *phydev);
+ 
++	/* 
++	 * Update the value in phydev->link to reflect the 
++	 * current link value
++	 */
++	int (*update_link)(struct phy_device *phydev);
++
+ 	/* Clears any pending interrupts */
+ 	int (*ack_interrupt)(struct phy_device *phydev);
+ 
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -698,6 +698,9 @@ int genphy_update_link(struct phy_device
+ {
+ 	int status;
+ 
++	if (phydev->drv->update_link)
++		return phydev->drv->update_link(phydev);
++
+ 	/* Do a fake read */
+ 	status = phy_read(phydev, MII_BMSR);
+ 
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -106,6 +106,9 @@ static inline int phy_aneg_done(struct p
+ {
+ 	int retval;
+ 
++	if (phydev->drv->aneg_done)
++		return phydev->drv->aneg_done(phydev);
++
+ 	retval = phy_read(phydev, MII_BMSR);
+ 
+ 	return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE);
diff --git a/target/linux/generic/patches-2.6.34/620-phy_adm6996.patch b/target/linux/generic/patches-2.6.34/620-phy_adm6996.patch
new file mode 100644
index 0000000000..86bab7a1eb
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/620-phy_adm6996.patch
@@ -0,0 +1,24 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -93,6 +93,11 @@ config MICREL_PHY
+ 	---help---
+ 	  Supports the KSZ9021, VSC8201, KS8001 PHYs.
+ 
++config ADM6996_PHY
++	tristate "Driver for ADM6996 switches"
++	---help---
++	  Currently supports the ADM6996F switch
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -13,6 +13,7 @@ obj-$(CONFIG_VITESSE_PHY)	+= vitesse.o
+ obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
+ obj-$(CONFIG_BCM63XX_PHY)	+= bcm63xx.o
+ obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
++obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
diff --git a/target/linux/generic/patches-2.6.34/630-phy_packets.patch b/target/linux/generic/patches-2.6.34/630-phy_packets.patch
new file mode 100644
index 0000000000..fd6d0d2438
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/630-phy_packets.patch
@@ -0,0 +1,63 @@
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -146,6 +146,18 @@ int phy_scan_fixups(struct phy_device *p
+ }
+ EXPORT_SYMBOL(phy_scan_fixups);
+ 
++static int generic_receive_skb(struct sk_buff *skb)
++{
++	skb->protocol = eth_type_trans(skb, skb->dev);
++	return netif_receive_skb(skb);
++}
++
++static int generic_rx(struct sk_buff *skb)
++{
++	skb->protocol = eth_type_trans(skb, skb->dev);
++	return netif_rx(skb);
++}
++
+ struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
+ {
+ 	struct phy_device *dev;
+@@ -175,6 +187,8 @@ struct phy_device* phy_device_create(str
+ 	dev_set_name(&dev->dev, PHY_ID_FMT, bus->id, addr);
+ 
+ 	dev->state = PHY_DOWN;
++	dev->netif_receive_skb = &generic_receive_skb;
++	dev->netif_rx = &generic_rx;
+ 
+ 	mutex_init(&dev->lock);
+ 	INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine);
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -325,6 +325,20 @@ struct phy_device {
+ 	void (*adjust_link)(struct net_device *dev);
+ 
+ 	void (*adjust_state)(struct net_device *dev);
++
++	/*
++	 * By default these point to the original functions
++	 * with the same name. adding them to the phy_device
++	 * allows the phy driver to override them for packet
++	 * mangling if the ethernet driver supports it
++	 * This is required to support some really horrible
++	 * switches such as the Marvell 88E6060
++	 */
++	int (*netif_receive_skb)(struct sk_buff *skb);
++	int (*netif_rx)(struct sk_buff *skb);
++
++	/* alignment offset for packets */
++	int pkt_align;
+ };
+ #define to_phy_device(d) container_of(d, struct phy_device, dev)
+ 
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -863,6 +863,7 @@ struct net_device {
+ 	void			*ax25_ptr;	/* AX.25 specific data */
+ 	struct wireless_dev	*ieee80211_ptr;	/* IEEE 802.11 specific data,
+ 						   assign before registering */
++	void			*phy_ptr; /* PHY device specific data */
+ 
+ /*
+  * Cache line mostly used on receive path (including eth_type_trans())
diff --git a/target/linux/generic/patches-2.6.34/650-swconfig.patch b/target/linux/generic/patches-2.6.34/650-swconfig.patch
new file mode 100644
index 0000000000..6825037ce9
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/650-swconfig.patch
@@ -0,0 +1,25 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -13,6 +13,12 @@ menuconfig PHYLIB
+ 
+ if PHYLIB
+ 
++config SWCONFIG
++	tristate "Switch configuration API"
++	---help---
++	  Switch configuration API using netlink. This allows
++	  you to configure the VLAN features of certain switches.
++
+ comment "MII PHY device drivers"
+ 
+ config MARVELL_PHY
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -3,6 +3,7 @@
+ libphy-objs			:= phy.o phy_device.o mdio_bus.o
+ 
+ obj-$(CONFIG_PHYLIB)		+= libphy.o
++obj-$(CONFIG_SWCONFIG)		+= swconfig.o
+ obj-$(CONFIG_MARVELL_PHY)	+= marvell.o
+ obj-$(CONFIG_DAVICOM_PHY)	+= davicom.o
+ obj-$(CONFIG_CICADA_PHY)	+= cicada.o
diff --git a/target/linux/generic/patches-2.6.34/651-swconfig-2.6.32-fix.patch b/target/linux/generic/patches-2.6.34/651-swconfig-2.6.32-fix.patch
new file mode 100644
index 0000000000..b86e259c8d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/651-swconfig-2.6.32-fix.patch
@@ -0,0 +1,29 @@
+--- a/drivers/net/phy/swconfig.c
++++ b/drivers/net/phy/swconfig.c
+@@ -335,7 +335,7 @@ swconfig_send_multipart(struct swconfig_
+ 			if (cb->close(cb, arg) < 0)
+ 				goto error;
+ 		}
+-		err = genlmsg_unicast(cb->msg, info->snd_pid);
++		err = genlmsg_reply(cb->msg, info);
+ 		cb->msg = NULL;
+ 		if (err < 0)
+ 			goto error;
+@@ -419,7 +419,7 @@ swconfig_list_attrs(struct sk_buff *skb,
+ 	if (!cb.msg)
+ 		return 0;
+ 
+-	return genlmsg_unicast(cb.msg, info->snd_pid);
++	return genlmsg_reply(cb.msg, info);
+ 
+ error:
+ 	if (cb.msg)
+@@ -732,7 +732,7 @@ swconfig_get_attr(struct sk_buff *skb, s
+ 		goto nla_put_failure;
+ 
+ 	swconfig_put_dev(dev);
+-	return genlmsg_unicast(msg, info->snd_pid);
++	return genlmsg_reply(msg, info);
+ 
+ nla_put_failure:
+ 	if (msg)
diff --git a/target/linux/generic/patches-2.6.34/660-phy_mvswitch.patch b/target/linux/generic/patches-2.6.34/660-phy_mvswitch.patch
new file mode 100644
index 0000000000..f5ff558b0f
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/660-phy_mvswitch.patch
@@ -0,0 +1,22 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -104,6 +104,9 @@ config ADM6996_PHY
+ 	---help---
+ 	  Currently supports the ADM6996F switch
+ 
++config MVSWITCH_PHY
++	tristate "Driver for Marvell 88E6060 switches"
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -15,6 +15,7 @@ obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
+ obj-$(CONFIG_BCM63XX_PHY)	+= bcm63xx.o
+ obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
+ obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
++obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
diff --git a/target/linux/generic/patches-2.6.34/670-phy_ip175c.patch b/target/linux/generic/patches-2.6.34/670-phy_ip175c.patch
new file mode 100644
index 0000000000..22a56ed4dc
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/670-phy_ip175c.patch
@@ -0,0 +1,23 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -107,6 +107,10 @@ config ADM6996_PHY
+ config MVSWITCH_PHY
+ 	tristate "Driver for Marvell 88E6060 switches"
+ 
++config IP17XX_PHY
++	tristate "Driver for IC+ IP17xx switches"
++	select SWCONFIG
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -16,6 +16,7 @@ obj-$(CONFIG_BCM63XX_PHY)	+= bcm63xx.o
+ obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
+ obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
+ obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
++obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
diff --git a/target/linux/generic/patches-2.6.34/680-phy_ar8216.patch b/target/linux/generic/patches-2.6.34/680-phy_ar8216.patch
new file mode 100644
index 0000000000..c375a97292
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/680-phy_ar8216.patch
@@ -0,0 +1,23 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -111,6 +111,10 @@ config IP17XX_PHY
+ 	tristate "Driver for IC+ IP17xx switches"
+ 	select SWCONFIG
+ 
++config AR8216_PHY
++	tristate "Driver for Atheros AR8216 switches"
++	select SWCONFIG
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -18,6 +18,7 @@ obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
+ obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
+ obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
++obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
diff --git a/target/linux/generic/patches-2.6.34/690-phy_rtl8306.patch b/target/linux/generic/patches-2.6.34/690-phy_rtl8306.patch
new file mode 100644
index 0000000000..e97b84d48c
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/690-phy_rtl8306.patch
@@ -0,0 +1,23 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -115,6 +115,10 @@ config AR8216_PHY
+ 	tristate "Driver for Atheros AR8216 switches"
+ 	select SWCONFIG
+ 
++config RTL8306_PHY
++	tristate "Driver for Realtek RTL8306S switches"
++	select SWCONFIG
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -19,6 +19,7 @@ obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
+ obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
++obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
diff --git a/target/linux/generic/patches-2.6.34/691-phy_rtl8366.patch b/target/linux/generic/patches-2.6.34/691-phy_rtl8366.patch
new file mode 100644
index 0000000000..34ac10ed39
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/691-phy_rtl8366.patch
@@ -0,0 +1,44 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -157,4 +157,29 @@ config MDIO_OCTEON
+ 
+ 	  If in doubt, say Y.
+ 
++config RTL8366_SMI
++	tristate "Driver for the RTL8366 SMI interface"
++	depends on GENERIC_GPIO
++	---help---
++	  This module implements the SMI interface protocol which is used
++	  by some RTL8366 ethernet switch devices via the generic GPIO API.
++
++if RTL8366_SMI
++
++config RTL8366S_PHY
++	tristate "Driver for the Realtek RTL8366S switch"
++	select SWCONFIG
++
++config RTL8366RB_PHY
++	tristate "Driver for the Realtek RTL8366RB switch"
++	select SWCONFIG
++
++config RTL8366S_PHY_DEBUG_FS
++	bool "RTL8366 switch driver DEBUG_FS support"
++	depends on RTL8366S_PHY || RTL8366RB_PHY
++	depends on DEBUG_FS
++	default n
++
++endif # RTL8366_SMI
++
+ endif # PHYLIB
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -20,6 +20,9 @@ obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
+ obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
++obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o
++obj-$(CONFIG_RTL8366S_PHY)	+= rtl8366s.o
++obj-$(CONFIG_RTL8366RB_PHY)	+= rtl8366rb.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
diff --git a/target/linux/generic/patches-2.6.34/700-rtc7301.patch b/target/linux/generic/patches-2.6.34/700-rtc7301.patch
new file mode 100644
index 0000000000..f4325d298a
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/700-rtc7301.patch
@@ -0,0 +1,250 @@
+--- a/drivers/rtc/Kconfig
++++ b/drivers/rtc/Kconfig
+@@ -618,6 +618,15 @@ config RTC_DRV_NUC900
+ 	  If you say yes here you get support for the RTC subsystem of the
+ 	  NUC910/NUC920 used in embedded systems.
+ 
++config RTC_DRV_RTC7301
++	tristate "Epson RTC-7301 SF/DG"
++	help
++	  If you say Y here you will get support for the
++	  Epson RTC-7301 SF/DG RTC chips.
++
++	  This driver can also be built as a module. If so, the module
++	  will be called rtc-7301.
++
+ comment "on-CPU RTC drivers"
+ 
+ config RTC_DRV_OMAP
+--- a/drivers/rtc/Makefile
++++ b/drivers/rtc/Makefile
+@@ -74,6 +74,7 @@ obj-$(CONFIG_RTC_DRV_RP5C01)	+= rtc-rp5c
+ obj-$(CONFIG_RTC_DRV_RS5C313)	+= rtc-rs5c313.o
+ obj-$(CONFIG_RTC_DRV_RS5C348)	+= rtc-rs5c348.o
+ obj-$(CONFIG_RTC_DRV_RS5C372)	+= rtc-rs5c372.o
++obj-$(CONFIG_RTC_DRV_RTC7301)	+= rtc-rtc7301.o
+ obj-$(CONFIG_RTC_DRV_RX8025)	+= rtc-rx8025.o
+ obj-$(CONFIG_RTC_DRV_RX8581)	+= rtc-rx8581.o
+ obj-$(CONFIG_RTC_DRV_S35390A)	+= rtc-s35390a.o
+--- /dev/null
++++ b/drivers/rtc/rtc-rtc7301.c
+@@ -0,0 +1,219 @@
++/*
++ * Driver for Epson RTC-7301SF/DG
++ *
++ * Copyright (C) 2009 Jose Vasconcellos
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/rtc.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/delay.h>
++#include <linux/bcd.h>
++
++#define RTC_NAME "rtc7301"
++#define RTC_VERSION "0.1"
++
++/* Epson RTC-7301 register addresses */
++#define RTC7301_SEC		0x00
++#define RTC7301_SEC10		0x01
++#define RTC7301_MIN		0x02
++#define RTC7301_MIN10		0x03
++#define RTC7301_HOUR		0x04
++#define RTC7301_HOUR10		0x05
++#define RTC7301_WEEKDAY		0x06
++#define RTC7301_DAY		0x07
++#define RTC7301_DAY10		0x08
++#define RTC7301_MON		0x09
++#define RTC7301_MON10		0x0A
++#define RTC7301_YEAR		0x0B
++#define RTC7301_YEAR10		0x0C
++#define RTC7301_YEAR100		0x0D
++#define RTC7301_YEAR1000	0x0E
++#define RTC7301_CTRLREG		0x0F
++
++static uint8_t __iomem *rtc7301_base;
++
++#define read_reg(offset) (readb(rtc7301_base + offset) & 0xf)
++#define write_reg(offset, data) writeb(data, rtc7301_base + (offset))
++
++#define rtc7301_isbusy() (read_reg(RTC7301_CTRLREG) & 1)
++
++static void rtc7301_init_settings(void)
++{
++	int i;
++
++	write_reg(RTC7301_CTRLREG, 2);
++	write_reg(RTC7301_YEAR1000, 2);
++	udelay(122);
++
++	/* bank 1 */
++	write_reg(RTC7301_CTRLREG, 6);
++	for (i=0; i<15; i++)
++		write_reg(i, 0);
++
++	/* bank 2 */
++	write_reg(RTC7301_CTRLREG, 14);
++	for (i=0; i<15; i++)
++		write_reg(i, 0);
++	write_reg(RTC7301_CTRLREG, 0);
++}
++
++static int rtc7301_get_datetime(struct device *dev, struct rtc_time *dt)
++{
++	int cnt;
++	uint8_t buf[16];
++
++	cnt = 0;
++	while (rtc7301_isbusy()) {
++		udelay(244);
++		if (cnt++ > 100) {
++			dev_err(dev, "%s: timeout error %x\n", __func__, rtc7301_base[RTC7301_CTRLREG]);
++			return -EIO;
++		}
++	}
++
++	for (cnt=0; cnt<16; cnt++)
++		buf[cnt] = read_reg(cnt);
++
++	if (buf[RTC7301_SEC10] & 8) {
++		dev_err(dev, "%s: RTC not set\n", __func__);
++		return -EINVAL;
++	}
++
++	memset(dt, 0, sizeof(*dt));
++
++	dt->tm_sec =  buf[RTC7301_SEC] + buf[RTC7301_SEC10]*10;
++	dt->tm_min =  buf[RTC7301_MIN] + buf[RTC7301_MIN10]*10;
++	dt->tm_hour = buf[RTC7301_HOUR] + buf[RTC7301_HOUR10]*10;
++
++	dt->tm_mday = buf[RTC7301_DAY] + buf[RTC7301_DAY10]*10;
++	dt->tm_mon =  buf[RTC7301_MON] + buf[RTC7301_MON10]*10 - 1;
++	dt->tm_year = buf[RTC7301_YEAR] + buf[RTC7301_YEAR10]*10 +
++		      buf[RTC7301_YEAR100]*100 +
++		      ((buf[RTC7301_YEAR1000] & 3)*1000) - 1900;
++
++	/* the rtc device may contain illegal values on power up
++	 * according to the data sheet. make sure they are valid.
++	 */
++
++	return rtc_valid_tm(dt);
++}
++
++static int rtc7301_set_datetime(struct device *dev, struct rtc_time *dt)
++{
++	int data;
++
++	data = dt->tm_year + 1900;
++	if (data >= 2100 || data < 1900)
++		return -EINVAL;
++
++	write_reg(RTC7301_CTRLREG, 2);
++       	udelay(122);
++
++	data = bin2bcd(dt->tm_sec);
++	write_reg(RTC7301_SEC, data);
++	write_reg(RTC7301_SEC10, (data >> 4));
++
++	data = bin2bcd(dt->tm_min);
++	write_reg(RTC7301_MIN, data );
++	write_reg(RTC7301_MIN10, (data >> 4));
++
++	data = bin2bcd(dt->tm_hour);
++	write_reg(RTC7301_HOUR, data);
++	write_reg(RTC7301_HOUR10, (data >> 4));
++
++	data = bin2bcd(dt->tm_mday);
++	write_reg(RTC7301_DAY, data);
++	write_reg(RTC7301_DAY10, (data>> 4));
++
++	data = bin2bcd(dt->tm_mon + 1);
++	write_reg(RTC7301_MON, data);
++	write_reg(RTC7301_MON10, (data >> 4));
++
++	data = bin2bcd(dt->tm_year % 100);
++	write_reg(RTC7301_YEAR, data);
++	write_reg(RTC7301_YEAR10, (data >> 4));
++	data = bin2bcd((1900 + dt->tm_year) / 100);
++	write_reg(RTC7301_YEAR100, data);
++
++	data = bin2bcd(dt->tm_wday);
++	write_reg(RTC7301_WEEKDAY, data);
++
++	write_reg(RTC7301_CTRLREG, 0);
++
++	return 0;
++}
++
++static const struct rtc_class_ops rtc7301_rtc_ops = {
++	.read_time	= rtc7301_get_datetime,
++	.set_time	= rtc7301_set_datetime,
++};
++
++static int __devinit rtc7301_probe(struct platform_device *pdev)
++{
++	struct rtc_device *rtc;
++	struct resource *res;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res)
++		return -ENOENT;
++
++	rtc7301_base = ioremap_nocache(res->start, 0x1000 /*res->end - res->start + 1*/);
++	if (!rtc7301_base)
++		return -EINVAL;
++
++	rtc = rtc_device_register(RTC_NAME, &pdev->dev,
++				&rtc7301_rtc_ops, THIS_MODULE);
++	if (IS_ERR(rtc)) {
++		iounmap(rtc7301_base);
++		return PTR_ERR(rtc);
++	}
++
++	platform_set_drvdata(pdev, rtc);
++
++	rtc7301_init_settings();
++	return 0;
++}
++
++static int __devexit rtc7301_remove(struct platform_device *pdev)
++{
++	struct rtc_device *rtc = platform_get_drvdata(pdev);
++
++	if (rtc)
++		rtc_device_unregister(rtc);
++	if (rtc7301_base)
++		iounmap(rtc7301_base);
++	return 0;
++}
++
++static struct platform_driver rtc7301_driver = {
++	.driver = {
++		.name	= RTC_NAME,
++		.owner	= THIS_MODULE,
++	},
++	.probe	= rtc7301_probe,
++	.remove = __devexit_p(rtc7301_remove),
++};
++
++static __init int rtc7301_init(void)
++{
++	return platform_driver_register(&rtc7301_driver);
++}
++module_init(rtc7301_init);
++
++static __exit void rtc7301_exit(void)
++{
++	platform_driver_unregister(&rtc7301_driver);
++}
++module_exit(rtc7301_exit);
++
++MODULE_DESCRIPTION("Epson 7301 RTC driver");
++MODULE_AUTHOR("Jose Vasconcellos <jvasco@verizon.net>");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:" RTC_NAME);
++MODULE_VERSION(RTC_VERSION);
diff --git a/target/linux/generic/patches-2.6.34/750-glamo-headers.patch b/target/linux/generic/patches-2.6.34/750-glamo-headers.patch
new file mode 100644
index 0000000000..c2e3880641
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/750-glamo-headers.patch
@@ -0,0 +1,21 @@
+--- a/include/linux/fb.h
++++ b/include/linux/fb.h
+@@ -124,6 +124,7 @@ struct dentry;
+ #define FB_ACCEL_TRIDENT_BLADE3D 52	/* Trident Blade3D		*/
+ #define FB_ACCEL_TRIDENT_BLADEXP 53	/* Trident BladeXP		*/
+ #define FB_ACCEL_CIRRUS_ALPINE   53	/* Cirrus Logic 543x/544x/5480	*/
++#define FB_ACCEL_GLAMO		50	/* SMedia Glamo                 */
+ #define FB_ACCEL_NEOMAGIC_NM2070 90	/* NeoMagic NM2070              */
+ #define FB_ACCEL_NEOMAGIC_NM2090 91	/* NeoMagic NM2090              */
+ #define FB_ACCEL_NEOMAGIC_NM2093 92	/* NeoMagic NM2093              */
+--- a/include/linux/Kbuild
++++ b/include/linux/Kbuild
+@@ -77,6 +77,8 @@ header-y += genetlink.h
+ header-y += gen_stats.h
+ header-y += gfs2_ondisk.h
+ header-y += gigaset_dev.h
++header-y += glamofb.h
++header-y += glamo-engine.h
+ header-y += hysdn_if.h
+ header-y += i2o-dev.h
+ header-y += i8k.h
diff --git a/target/linux/generic/patches-2.6.34/801-usb_serial_endpoint_size.patch b/target/linux/generic/patches-2.6.34/801-usb_serial_endpoint_size.patch
new file mode 100644
index 0000000000..d03275e57a
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/801-usb_serial_endpoint_size.patch
@@ -0,0 +1,25 @@
+--- a/drivers/usb/serial/usb-serial.c
++++ b/drivers/usb/serial/usb-serial.c
+@@ -61,6 +61,7 @@ static struct usb_driver usb_serial_driv
+    drivers depend on it.
+ */
+ 
++static ushort maxSize = 0;
+ static int debug;
+ /* initially all NULL */
+ static struct usb_serial *serial_table[SERIAL_TTY_MINORS];
+@@ -901,7 +902,7 @@ int usb_serial_probe(struct usb_interfac
+ 			dev_err(&interface->dev, "No free urbs available\n");
+ 			goto probe_error;
+ 		}
+-		buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
++		buffer_size = (endpoint->wMaxPacketSize > maxSize) ? endpoint->wMaxPacketSize : maxSize;
+ 		port->bulk_in_size = buffer_size;
+ 		port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
+ 		port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
+@@ -1343,3 +1344,5 @@ MODULE_LICENSE("GPL");
+ 
+ module_param(debug, bool, S_IRUGO | S_IWUSR);
+ MODULE_PARM_DESC(debug, "Debug enabled or not");
++module_param(maxSize, ushort,0);
++MODULE_PARM_DESC(maxSize,"User specified USB endpoint size");
diff --git a/target/linux/generic/patches-2.6.34/840-unable_to_open_console.patch b/target/linux/generic/patches-2.6.34/840-unable_to_open_console.patch
new file mode 100644
index 0000000000..6a634b7b39
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/840-unable_to_open_console.patch
@@ -0,0 +1,11 @@
+--- a/init/main.c
++++ b/init/main.c
+@@ -887,7 +887,7 @@ static int __init kernel_init(void * unu
+ 
+ 	/* Open the /dev/console on the rootfs, this should never fail */
+ 	if (sys_open((const char __user *) "/dev/console", O_RDWR, 0) < 0)
+-		printk(KERN_WARNING "Warning: unable to open an initial console.\n");
++		printk(KERN_WARNING "Please be patient, while OpenWrt loads ...\n");
+ 
+ 	(void) sys_dup(0);
+ 	(void) sys_dup(0);
diff --git a/target/linux/generic/patches-2.6.34/890-generic_pwm_api.patch b/target/linux/generic/patches-2.6.34/890-generic_pwm_api.patch
new file mode 100644
index 0000000000..6c58e53204
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/890-generic_pwm_api.patch
@@ -0,0 +1,46 @@
+Patches from: Bill Gatliff <bgat@billgatliff.com>
+Based on:
+* Expunge old Atmel PWMC driver, replacing it with one that conforms to the PWM API
+* Incorporate PWM API code into KBuild
+Ignore the LEDS part atm
+---
+
+diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
+index 049ff24..b94666c 100644
+--- a/drivers/misc/Makefile
++++ b/drivers/misc/Makefile
+@@ -5,7 +5,6 @@
+ obj-$(CONFIG_IBM_ASM)		+= ibmasm/
+ obj-$(CONFIG_HDPU_FEATURES)	+= hdpuftrs/
+ obj-$(CONFIG_AD525X_DPOT)	+= ad525x_dpot.o
+-obj-$(CONFIG_ATMEL_PWM)		+= atmel_pwm.o
+ obj-$(CONFIG_ATMEL_SSC)		+= atmel-ssc.o
+ obj-$(CONFIG_ATMEL_TCLIB)	+= atmel_tclib.o
+ obj-$(CONFIG_ICS932S401)	+= ics932s401.o
+diff --git a/drivers/Kconfig b/drivers/Kconfig
+index 368ae6d..54d7b16 100644
+--- a/drivers/Kconfig
++++ b/drivers/Kconfig
+@@ -54,6 +54,8 @@ source "drivers/pps/Kconfig"
+ 
+ source "drivers/gpio/Kconfig"
+ 
++source "drivers/pwm/Kconfig"
++
+ source "drivers/w1/Kconfig"
+ 
+ source "drivers/power/Kconfig"
+diff --git a/drivers/Makefile b/drivers/Makefile
+index 6ee53c7..e6143f3 100644
+--- a/drivers/Makefile
++++ b/drivers/Makefile
+@@ -6,6 +6,8 @@
+ #
+ 
+ obj-y				+= gpio/
++obj-$(CONFIG_GENERIC_PWM)	+= pwm/
++
+ obj-$(CONFIG_PCI)		+= pci/
+ obj-$(CONFIG_PARISC)		+= parisc/
+ obj-$(CONFIG_RAPIDIO)		+= rapidio/
+diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
diff --git a/target/linux/generic/patches-2.6.34/902-darwin_scripts_include.patch b/target/linux/generic/patches-2.6.34/902-darwin_scripts_include.patch
new file mode 100644
index 0000000000..39b6abe8d0
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/902-darwin_scripts_include.patch
@@ -0,0 +1,102 @@
+--- a/scripts/genksyms/parse.c_shipped
++++ b/scripts/genksyms/parse.c_shipped
+@@ -160,7 +160,9 @@
+ 
+ 
+ #include <assert.h>
++#ifndef __APPLE__
+ #include <malloc.h>
++#endif
+ #include "genksyms.h"
+ 
+ static int is_typedef;
+--- a/scripts/genksyms/parse.y
++++ b/scripts/genksyms/parse.y
+@@ -24,7 +24,9 @@
+ %{
+ 
+ #include <assert.h>
++#ifndef __APPLE__
+ #include <malloc.h>
++#endif
+ #include "genksyms.h"
+ 
+ static int is_typedef;
+--- a/scripts/kallsyms.c
++++ b/scripts/kallsyms.c
+@@ -22,6 +22,35 @@
+ #include <stdlib.h>
+ #include <string.h>
+ #include <ctype.h>
++#ifdef __APPLE__
++/* Darwin has no memmem implementation, this one is ripped of the uClibc-0.9.28 source */
++void *memmem (const void *haystack, size_t haystack_len,
++                          const void *needle,  size_t needle_len)
++{
++  const char *begin;
++  const char *const last_possible
++    = (const char *) haystack + haystack_len - needle_len;
++
++  if (needle_len == 0)
++    /* The first occurrence of the empty string is deemed to occur at
++       the beginning of the string.  */
++    return (void *) haystack;
++
++  /* Sanity check, otherwise the loop might search through the whole
++     memory.  */
++  if (__builtin_expect (haystack_len < needle_len, 0))
++    return NULL;
++
++  for (begin = (const char *) haystack; begin <= last_possible; ++begin)
++    if (begin[0] == ((const char *) needle)[0] &&
++        !memcmp ((const void *) &begin[1],
++                 (const void *) ((const char *) needle + 1),
++                 needle_len - 1))
++      return (void *) begin;
++
++  return NULL;
++}
++#endif
+ 
+ #ifndef ARRAY_SIZE
+ #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof(arr[0]))
+--- a/scripts/kconfig/Makefile
++++ b/scripts/kconfig/Makefile
+@@ -140,6 +140,9 @@ check-lxdialog  := $(srctree)/$(src)/lxd
+ # we really need to do so. (Do not call gcc as part of make mrproper)
+ HOST_EXTRACFLAGS = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags)
+ HOST_LOADLIBES   = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
++ifeq ($(shell uname -s),Darwin)
++HOST_LOADLIBES  += -lncurses
++endif
+ 
+ HOST_EXTRACFLAGS += -DLOCALE
+ 
+--- a/scripts/mod/mk_elfconfig.c
++++ b/scripts/mod/mk_elfconfig.c
+@@ -1,7 +1,11 @@
+ #include <stdio.h>
+ #include <stdlib.h>
+ #include <string.h>
++#ifndef __APPLE__
+ #include <elf.h>
++#else
++#include "../../../../../tools/sstrip/include/elf.h"
++#endif
+ 
+ int
+ main(int argc, char **argv)
+--- a/scripts/mod/modpost.h
++++ b/scripts/mod/modpost.h
+@@ -7,7 +7,11 @@
+ #include <sys/mman.h>
+ #include <fcntl.h>
+ #include <unistd.h>
++#if !(defined(__APPLE__) || defined(__CYGWIN__))
+ #include <elf.h>
++#else
++#include "../../../../../tools/sstrip/include/elf.h"
++#endif
+ 
+ #include "elfconfig.h"
+ 
diff --git a/target/linux/generic/patches-2.6.34/903-hostap_txpower.patch b/target/linux/generic/patches-2.6.34/903-hostap_txpower.patch
new file mode 100644
index 0000000000..8aa43c5242
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/903-hostap_txpower.patch
@@ -0,0 +1,154 @@
+--- a/drivers/net/wireless/hostap/hostap_ap.c
++++ b/drivers/net/wireless/hostap/hostap_ap.c
+@@ -2336,13 +2336,13 @@ int prism2_ap_get_sta_qual(local_info_t
+ 		addr[count].sa_family = ARPHRD_ETHER;
+ 		memcpy(addr[count].sa_data, sta->addr, ETH_ALEN);
+ 		if (sta->last_rx_silence == 0)
+-			qual[count].qual = sta->last_rx_signal < 27 ?
+-				0 : (sta->last_rx_signal - 27) * 92 / 127;
++                        qual[count].qual = (sta->last_rx_signal - 156) == 0 ?
++                                0 : (sta->last_rx_signal - 156) * 92 / 64;
+ 		else
+-			qual[count].qual = sta->last_rx_signal -
+-				sta->last_rx_silence - 35;
+-		qual[count].level = HFA384X_LEVEL_TO_dBm(sta->last_rx_signal);
+-		qual[count].noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence);
++                        qual[count].qual = (sta->last_rx_signal -
++                                sta->last_rx_silence) * 92 / 64;
++                qual[count].level = sta->last_rx_signal;
++                qual[count].noise = sta->last_rx_silence;
+ 		qual[count].updated = sta->last_rx_updated;
+ 
+ 		sta->last_rx_updated = IW_QUAL_DBM;
+@@ -2408,13 +2408,13 @@ int prism2_ap_translate_scan(struct net_
+ 		memset(&iwe, 0, sizeof(iwe));
+ 		iwe.cmd = IWEVQUAL;
+ 		if (sta->last_rx_silence == 0)
+-			iwe.u.qual.qual = sta->last_rx_signal < 27 ?
+-				0 : (sta->last_rx_signal - 27) * 92 / 127;
++	                iwe.u.qual.qual = (sta->last_rx_signal -156) == 0 ?
++	                        0 : (sta->last_rx_signal - 156) * 92 / 64;
+ 		else
+-			iwe.u.qual.qual = sta->last_rx_signal -
+-				sta->last_rx_silence - 35;
+-		iwe.u.qual.level = HFA384X_LEVEL_TO_dBm(sta->last_rx_signal);
+-		iwe.u.qual.noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence);
++                        iwe.u.qual.qual = (sta->last_rx_signal -
++                                sta->last_rx_silence) * 92 / 64;
++                iwe.u.qual.level = sta->last_rx_signal;
++                iwe.u.qual.noise = sta->last_rx_silence;
+ 		iwe.u.qual.updated = sta->last_rx_updated;
+ 		iwe.len = IW_EV_QUAL_LEN;
+ 		current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+--- a/drivers/net/wireless/hostap/hostap_config.h
++++ b/drivers/net/wireless/hostap/hostap_config.h
+@@ -45,4 +45,9 @@
+  */
+ /* #define PRISM2_NO_STATION_MODES */
+ 
++/* Enable TX power Setting functions
++ * (min att = -128 , max att =  127)
++ */
++#define RAW_TXPOWER_SETTING
++
+ #endif /* HOSTAP_CONFIG_H */
+--- a/drivers/net/wireless/hostap/hostap.h
++++ b/drivers/net/wireless/hostap/hostap.h
+@@ -90,6 +90,7 @@ extern const struct iw_handler_def hosta
+ extern const struct ethtool_ops prism2_ethtool_ops;
+ 
+ int hostap_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
++int hostap_restore_power(struct net_device *dev);
+ 
+ 
+ #endif /* HOSTAP_H */
+--- a/drivers/net/wireless/hostap/hostap_hw.c
++++ b/drivers/net/wireless/hostap/hostap_hw.c
+@@ -932,6 +932,7 @@ static int hfa384x_set_rid(struct net_de
+ 			prism2_hw_reset(dev);
+ 	}
+ 
++	hostap_restore_power(dev);
+ 	return res;
+ }
+ 
+--- a/drivers/net/wireless/hostap/hostap_info.c
++++ b/drivers/net/wireless/hostap/hostap_info.c
+@@ -433,6 +433,11 @@ static void handle_info_queue_linkstatus
+ 	}
+ 
+ 	/* Get BSSID if we have a valid AP address */
++
++	if ( val == HFA384X_LINKSTATUS_CONNECTED ||
++	     val == HFA384X_LINKSTATUS_DISCONNECTED )
++			hostap_restore_power(local->dev);
++
+ 	if (connected) {
+ 		netif_carrier_on(local->dev);
+ 		netif_carrier_on(local->ddev);
+--- a/drivers/net/wireless/hostap/hostap_ioctl.c
++++ b/drivers/net/wireless/hostap/hostap_ioctl.c
+@@ -1477,23 +1477,20 @@ static int prism2_txpower_hfa386x_to_dBm
+ 		val = 255;
+ 
+ 	tmp = val;
+-	tmp >>= 2;
+ 
+-	return -12 - tmp;
++	return tmp;
+ }
+ 
+ static u16 prism2_txpower_dBm_to_hfa386x(int val)
+ {
+ 	signed char tmp;
+ 
+-	if (val > 20)
+-		return 128;
+-	else if (val < -43)
++	if (val > 127)
+ 		return 127;
++	else if (val < -128)
++		return 128;
+ 
+ 	tmp = val;
+-	tmp = -12 - tmp;
+-	tmp <<= 2;
+ 
+ 	return (unsigned char) tmp;
+ }
+@@ -4057,3 +4054,35 @@ int hostap_ioctl(struct net_device *dev,
+ 
+ 	return ret;
+ }
++
++/* BUG FIX: Restore power setting value when lost due to F/W bug */
++
++int hostap_restore_power(struct net_device *dev)
++{
++        struct hostap_interface *iface = netdev_priv(dev);
++       local_info_t *local = iface->local;
++
++       u16 val;
++       int ret = 0;
++
++       if (local->txpower_type == PRISM2_TXPOWER_OFF) {
++                       val = 0xff; /* use all standby and sleep modes */
++                       ret = local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF,
++                                              HFA386X_CR_A_D_TEST_MODES2,
++                                              &val, NULL);
++       }
++
++#ifdef RAW_TXPOWER_SETTING
++       if (local->txpower_type == PRISM2_TXPOWER_FIXED) {
++               val = HFA384X_TEST_CFG_BIT_ALC;
++               local->func->cmd(dev, HFA384X_CMDCODE_TEST |
++                                (HFA384X_TEST_CFG_BITS << 8), 0, &val, NULL);
++               val = prism2_txpower_dBm_to_hfa386x(local->txpower);
++               ret = (local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF,
++                            HFA386X_CR_MANUAL_TX_POWER, &val, NULL));
++       }
++#endif /* RAW_TXPOWER_SETTING */
++       return (ret ? -EOPNOTSUPP : 0);
++}
++
++EXPORT_SYMBOL(hostap_restore_power);
diff --git a/target/linux/generic/patches-2.6.34/903-stddef_include.patch b/target/linux/generic/patches-2.6.34/903-stddef_include.patch
new file mode 100644
index 0000000000..7fe248d8d3
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/903-stddef_include.patch
@@ -0,0 +1,17 @@
+--- a/include/linux/stddef.h
++++ b/include/linux/stddef.h
+@@ -16,6 +16,7 @@ enum {
+ 	false	= 0,
+ 	true	= 1
+ };
++#endif /* __KERNEL__ */
+ 
+ #undef offsetof
+ #ifdef __compiler_offsetof
+@@ -23,6 +24,5 @@ enum {
+ #else
+ #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
+ #endif
+-#endif /* __KERNEL__ */
+ 
+ #endif
diff --git a/target/linux/generic/patches-2.6.34/905-i386_build.patch b/target/linux/generic/patches-2.6.34/905-i386_build.patch
new file mode 100644
index 0000000000..c701fdaa95
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/905-i386_build.patch
@@ -0,0 +1,10 @@
+--- a/arch/x86/boot/tools/build.c
++++ b/arch/x86/boot/tools/build.c
+@@ -29,7 +29,6 @@
+ #include <stdarg.h>
+ #include <sys/types.h>
+ #include <sys/stat.h>
+-#include <sys/sysmacros.h>
+ #include <unistd.h>
+ #include <fcntl.h>
+ #include <sys/mman.h>
diff --git a/target/linux/generic/patches-2.6.34/920-01-hotpluggable-spi-gpio.patch b/target/linux/generic/patches-2.6.34/920-01-hotpluggable-spi-gpio.patch
new file mode 100644
index 0000000000..b10bc9a65e
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/920-01-hotpluggable-spi-gpio.patch
@@ -0,0 +1,60 @@
+Fix spi-gpio for hotplug.
+
+--mb
+
+
+
+--- a/drivers/spi/spi_gpio.c
++++ b/drivers/spi/spi_gpio.c
+@@ -218,7 +218,7 @@ static void spi_gpio_cleanup(struct spi_
+ 	spi_bitbang_cleanup(spi);
+ }
+ 
+-static int __init spi_gpio_alloc(unsigned pin, const char *label, bool is_in)
++static int __devinit spi_gpio_alloc(unsigned pin, const char *label, bool is_in)
+ {
+ 	int value;
+ 
+@@ -232,7 +232,7 @@ static int __init spi_gpio_alloc(unsigne
+ 	return value;
+ }
+ 
+-static int __init
++static int __devinit
+ spi_gpio_request(struct spi_gpio_platform_data *pdata, const char *label)
+ {
+ 	int value;
+@@ -261,7 +261,7 @@ done:
+ 	return value;
+ }
+ 
+-static int __init spi_gpio_probe(struct platform_device *pdev)
++static int __devinit spi_gpio_probe(struct platform_device *pdev)
+ {
+ 	int				status;
+ 	struct spi_master		*master;
+@@ -317,7 +317,7 @@ gpio_free:
+ 	return status;
+ }
+ 
+-static int __exit spi_gpio_remove(struct platform_device *pdev)
++static int __devexit spi_gpio_remove(struct platform_device *pdev)
+ {
+ 	struct spi_gpio			*spi_gpio;
+ 	struct spi_gpio_platform_data	*pdata;
+@@ -344,12 +344,13 @@ MODULE_ALIAS("platform:" DRIVER_NAME);
+ static struct platform_driver spi_gpio_driver = {
+ 	.driver.name	= DRIVER_NAME,
+ 	.driver.owner	= THIS_MODULE,
+-	.remove		= __exit_p(spi_gpio_remove),
++	.probe		= spi_gpio_probe,
++	.remove		= __devexit_p(spi_gpio_remove),
+ };
+ 
+ static int __init spi_gpio_init(void)
+ {
+-	return platform_driver_probe(&spi_gpio_driver, spi_gpio_probe);
++	return platform_driver_register(&spi_gpio_driver);
+ }
+ module_init(spi_gpio_init);
+ 
diff --git a/target/linux/generic/patches-2.6.34/920-04-spi-gpio-implement-spi-delay.patch b/target/linux/generic/patches-2.6.34/920-04-spi-gpio-implement-spi-delay.patch
new file mode 100644
index 0000000000..19032881b8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/920-04-spi-gpio-implement-spi-delay.patch
@@ -0,0 +1,58 @@
+Implement the SPI-GPIO delay function for busses that need speed limitation.
+
+--mb
+
+
+
+--- a/drivers/spi/spi_gpio.c
++++ b/drivers/spi/spi_gpio.c
+@@ -21,6 +21,7 @@
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
+ #include <linux/gpio.h>
++#include <linux/delay.h>
+ 
+ #include <linux/spi/spi.h>
+ #include <linux/spi/spi_bitbang.h>
+@@ -69,6 +70,7 @@ struct spi_gpio {
+  *		#define	SPI_MOSI_GPIO	120
+  *		#define	SPI_SCK_GPIO	121
+  *		#define	SPI_N_CHIPSEL	4
++ *		#undef NEED_SPIDELAY
+  *		#include "spi_gpio.c"
+  */
+ 
+@@ -76,6 +78,7 @@ struct spi_gpio {
+ #define DRIVER_NAME	"spi_gpio"
+ 
+ #define GENERIC_BITBANG	/* vs tight inlines */
++#define NEED_SPIDELAY	1
+ 
+ /* all functions referencing these symbols must define pdata */
+ #define SPI_MISO_GPIO	((pdata)->miso)
+@@ -120,12 +123,20 @@ static inline int getmiso(const struct s
+ #undef pdata
+ 
+ /*
+- * NOTE:  this clocks "as fast as we can".  It "should" be a function of the
+- * requested device clock.  Software overhead means we usually have trouble
+- * reaching even one Mbit/sec (except when we can inline bitops), so for now
+- * we'll just assume we never need additional per-bit slowdowns.
++ * NOTE:  to clock "as fast as we can", set spi_device.max_speed_hz
++ * and spi_transfer.speed_hz to 0.
++ * Otherwise this is a function of the requested device clock.
++ * Software overhead means we usually have trouble
++ * reaching even one Mbit/sec (except when we can inline bitops). So on small
++ * embedded devices with fast SPI slaves you usually don't need a delay.
+  */
+-#define spidelay(nsecs)	do {} while (0)
++static inline void spidelay(unsigned nsecs)
++{
++#ifdef NEED_SPIDELAY
++	if (unlikely(nsecs))
++		ndelay(nsecs);
++#endif /* NEED_SPIDELAY */
++}
+ 
+ #define	EXPAND_BITBANG_TXRX
+ #include <linux/spi/spi_bitbang.h>
diff --git a/target/linux/generic/patches-2.6.34/921-gpio_spi_driver.patch b/target/linux/generic/patches-2.6.34/921-gpio_spi_driver.patch
new file mode 100644
index 0000000000..65f17b49eb
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/921-gpio_spi_driver.patch
@@ -0,0 +1,366 @@
+THIS CODE IS DEPRECATED.
+
+Please use the new mainline SPI-GPIO driver, as of 2.6.29.
+
+--mb
+
+
+
+--- /dev/null
++++ b/include/linux/spi/spi_gpio_old.h
+@@ -0,0 +1,73 @@
++/*
++ * spi_gpio interface to platform code
++ *
++ * Copyright (c) 2008 Piotr Skamruk
++ * Copyright (c) 2008 Michael Buesch
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef _LINUX_SPI_SPI_GPIO
++#define _LINUX_SPI_SPI_GPIO
++
++#include <linux/types.h>
++#include <linux/spi/spi.h>
++
++
++/**
++ * struct spi_gpio_platform_data - Data definitions for a SPI-GPIO device.
++ *
++ * This structure holds information about a GPIO-based SPI device.
++ *
++ * @pin_clk: The GPIO pin number of the CLOCK pin.
++ *
++ * @pin_miso: The GPIO pin number of the MISO pin.
++ *
++ * @pin_mosi: The GPIO pin number of the MOSI pin.
++ *
++ * @pin_cs: The GPIO pin number of the CHIPSELECT pin.
++ *
++ * @cs_activelow: If true, the chip is selected when the CS line is low.
++ *
++ * @no_spi_delay: If true, no delay is done in the lowlevel bitbanging.
++ *                Note that doing no delay is not standards compliant,
++ *                but it might be needed to speed up transfers on some
++ *                slow embedded machines.
++ *
++ * @boardinfo_setup: This callback is called after the
++ *                   SPI master device was registered, but before the
++ *                   device is registered.
++ * @boardinfo_setup_data: Data argument passed to boardinfo_setup().
++ */
++struct spi_gpio_platform_data {
++	unsigned int pin_clk;
++	unsigned int pin_miso;
++	unsigned int pin_mosi;
++	unsigned int pin_cs;
++	bool cs_activelow;
++	bool no_spi_delay;
++	int (*boardinfo_setup)(struct spi_board_info *bi,
++			       struct spi_master *master,
++			       void *data);
++	void *boardinfo_setup_data;
++};
++
++/**
++ * SPI_GPIO_PLATDEV_NAME - The platform device name string.
++ *
++ * The name string that has to be used for platform_device_alloc
++ * when allocating a spi-gpio device.
++ */
++#define SPI_GPIO_PLATDEV_NAME	"spi-gpio"
++
++/**
++ * spi_gpio_next_id - Get another platform device ID number.
++ *
++ * This returns the next platform device ID number that has to be used
++ * for platform_device_alloc. The ID is opaque and should not be used for
++ * anything else.
++ */
++int spi_gpio_next_id(void);
++
++#endif /* _LINUX_SPI_SPI_GPIO */
+--- /dev/null
++++ b/drivers/spi/spi_gpio_old.c
+@@ -0,0 +1,251 @@
++/*
++ * Bitbanging SPI bus driver using GPIO API
++ *
++ * Copyright (c) 2008 Piotr Skamruk
++ * Copyright (c) 2008 Michael Buesch
++ *
++ * based on spi_s3c2410_gpio.c
++ *   Copyright (c) 2006 Ben Dooks
++ *   Copyright (c) 2006 Simtec Electronics
++ * and on i2c-gpio.c
++ *   Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/spinlock.h>
++#include <linux/workqueue.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_bitbang.h>
++#include <linux/spi/spi_gpio_old.h>
++#include <linux/gpio.h>
++#include <asm/atomic.h>
++
++
++struct spi_gpio {
++	struct spi_bitbang bitbang;
++	struct spi_gpio_platform_data *info;
++	struct platform_device *pdev;
++	struct spi_board_info bi;
++};
++
++
++static inline struct spi_gpio *spidev_to_sg(struct spi_device *dev)
++{
++	return dev->controller_data;
++}
++
++static inline void setsck(struct spi_device *dev, int val)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++	gpio_set_value(sp->info->pin_clk, val ? 1 : 0);
++}
++
++static inline void setmosi(struct spi_device *dev, int val)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++	gpio_set_value(sp->info->pin_mosi, val ? 1 : 0);
++}
++
++static inline u32 getmiso(struct spi_device *dev)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++	return gpio_get_value(sp->info->pin_miso) ? 1 : 0;
++}
++
++static inline void do_spidelay(struct spi_device *dev, unsigned nsecs)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++
++	if (!sp->info->no_spi_delay)
++		ndelay(nsecs);
++}
++
++#define spidelay(nsecs) do {					\
++	/* Steal the spi_device pointer from our caller.	\
++	 * The bitbang-API should probably get fixed here... */	\
++	do_spidelay(spi, nsecs);				\
++  } while (0)
++
++#define EXPAND_BITBANG_TXRX
++#include <linux/spi/spi_bitbang.h>
++
++static u32 spi_gpio_txrx_mode0(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
++}
++
++static u32 spi_gpio_txrx_mode1(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
++}
++
++static u32 spi_gpio_txrx_mode2(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
++}
++
++static u32 spi_gpio_txrx_mode3(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
++}
++
++static void spi_gpio_chipselect(struct spi_device *dev, int on)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++
++	if (sp->info->cs_activelow)
++		on = !on;
++	gpio_set_value(sp->info->pin_cs, on ? 1 : 0);
++}
++
++static int spi_gpio_probe(struct platform_device *pdev)
++{
++	struct spi_master *master;
++	struct spi_gpio_platform_data *pdata;
++	struct spi_gpio *sp;
++	struct spi_device *spidev;
++	int err;
++
++	pdata = pdev->dev.platform_data;
++	if (!pdata)
++		return -ENXIO;
++
++	err = -ENOMEM;
++	master = spi_alloc_master(&pdev->dev, sizeof(struct spi_gpio));
++	if (!master)
++		goto err_alloc_master;
++
++	sp = spi_master_get_devdata(master);
++	platform_set_drvdata(pdev, sp);
++	sp->info = pdata;
++
++	err = gpio_request(pdata->pin_clk, "spi_clock");
++	if (err)
++		goto err_request_clk;
++	err = gpio_request(pdata->pin_mosi, "spi_mosi");
++	if (err)
++		goto err_request_mosi;
++	err = gpio_request(pdata->pin_miso, "spi_miso");
++	if (err)
++		goto err_request_miso;
++	err = gpio_request(pdata->pin_cs, "spi_cs");
++	if (err)
++		goto err_request_cs;
++
++	sp->bitbang.master = spi_master_get(master);
++	sp->bitbang.master->bus_num = -1;
++	sp->bitbang.master->num_chipselect = 1;
++	sp->bitbang.chipselect = spi_gpio_chipselect;
++	sp->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_mode0;
++	sp->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_mode1;
++	sp->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_mode2;
++	sp->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_mode3;
++
++	gpio_direction_output(pdata->pin_clk, 0);
++	gpio_direction_output(pdata->pin_mosi, 0);
++	gpio_direction_output(pdata->pin_cs,
++			      pdata->cs_activelow ? 1 : 0);
++	gpio_direction_input(pdata->pin_miso);
++
++	err = spi_bitbang_start(&sp->bitbang);
++	if (err)
++		goto err_no_bitbang;
++	err = pdata->boardinfo_setup(&sp->bi, master,
++				     pdata->boardinfo_setup_data);
++	if (err)
++		goto err_bi_setup;
++	sp->bi.controller_data = sp;
++	spidev = spi_new_device(master, &sp->bi);
++	if (!spidev)
++		goto err_new_dev;
++
++	return 0;
++
++err_new_dev:
++err_bi_setup:
++	spi_bitbang_stop(&sp->bitbang);
++err_no_bitbang:
++	spi_master_put(sp->bitbang.master);
++	gpio_free(pdata->pin_cs);
++err_request_cs:
++	gpio_free(pdata->pin_miso);
++err_request_miso:
++	gpio_free(pdata->pin_mosi);
++err_request_mosi:
++	gpio_free(pdata->pin_clk);
++err_request_clk:
++	kfree(master);
++
++err_alloc_master:
++	return err;
++}
++
++static int __devexit spi_gpio_remove(struct platform_device *pdev)
++{
++	struct spi_gpio *sp;
++	struct spi_gpio_platform_data *pdata;
++
++	pdata = pdev->dev.platform_data;
++	sp = platform_get_drvdata(pdev);
++
++	gpio_free(pdata->pin_clk);
++	gpio_free(pdata->pin_mosi);
++	gpio_free(pdata->pin_miso);
++	gpio_free(pdata->pin_cs);
++	spi_bitbang_stop(&sp->bitbang);
++	spi_master_put(sp->bitbang.master);
++
++	return 0;
++}
++
++static struct platform_driver spi_gpio_driver = {
++	.driver		= {
++		.name	= SPI_GPIO_PLATDEV_NAME,
++		.owner	= THIS_MODULE,
++	},
++	.probe		= spi_gpio_probe,
++	.remove		= __devexit_p(spi_gpio_remove),
++};
++
++int spi_gpio_next_id(void)
++{
++	static atomic_t counter = ATOMIC_INIT(-1);
++
++	return atomic_inc_return(&counter);
++}
++EXPORT_SYMBOL(spi_gpio_next_id);
++
++static int __init spi_gpio_init(void)
++{
++	int err;
++
++	err = platform_driver_register(&spi_gpio_driver);
++	if (err)
++		printk(KERN_ERR "spi-gpio: register failed: %d\n", err);
++
++	return err;
++}
++module_init(spi_gpio_init);
++
++static void __exit spi_gpio_exit(void)
++{
++	platform_driver_unregister(&spi_gpio_driver);
++}
++module_exit(spi_gpio_exit);
++
++MODULE_AUTHOR("Piot Skamruk <piotr.skamruk at gmail.com>");
++MODULE_AUTHOR("Michael Buesch");
++MODULE_DESCRIPTION("Platform independent GPIO bitbanging SPI driver");
++MODULE_LICENSE("GPL v2");
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -133,6 +133,15 @@ config SPI_GPIO
+ 	  GPIO operations, you should be able to leverage that for better
+ 	  speed with a custom version of this driver; see the source code.
+ 
++config SPI_GPIO_OLD
++	tristate "Old GPIO API based bitbanging SPI controller (DEPRECATED)"
++	depends on SPI_MASTER && GENERIC_GPIO
++	select SPI_BITBANG
++	help
++	  This code is deprecated. Please use the new mainline SPI-GPIO driver.
++
++	  If unsure, say N.
++
+ config SPI_IMX
+ 	tristate "Freescale i.MX SPI controllers"
+ 	depends on ARCH_MXC
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -22,6 +22,7 @@ obj-$(CONFIG_SPI_DESIGNWARE)		+= dw_spi.
+ obj-$(CONFIG_SPI_DW_PCI)		+= dw_spi_pci.o
+ obj-$(CONFIG_SPI_DW_MMIO)		+= dw_spi_mmio.o
+ obj-$(CONFIG_SPI_GPIO)			+= spi_gpio.o
++obj-$(CONFIG_SPI_GPIO_OLD)		+= spi_gpio_old.o
+ obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
+ obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
+ obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
diff --git a/target/linux/generic/patches-2.6.34/922-gpiommc.patch b/target/linux/generic/patches-2.6.34/922-gpiommc.patch
new file mode 100644
index 0000000000..24e5d592e8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/922-gpiommc.patch
@@ -0,0 +1,843 @@
+--- /dev/null
++++ b/drivers/mmc/host/gpiommc.c
+@@ -0,0 +1,608 @@
++/*
++ * Driver an MMC/SD card on a bitbanging GPIO SPI bus.
++ * This module hooks up the mmc_spi and spi_gpio modules and also
++ * provides a configfs interface.
++ *
++ * Copyright 2008 Michael Buesch <mb@bu3sch.de>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include <linux/mmc/gpiommc.h>
++#include <linux/platform_device.h>
++#include <linux/list.h>
++#include <linux/mutex.h>
++#include <linux/spi/spi_gpio_old.h>
++#include <linux/configfs.h>
++#include <linux/gpio.h>
++#include <asm/atomic.h>
++
++
++#define PFX				"gpio-mmc: "
++
++
++struct gpiommc_device {
++	struct platform_device *pdev;
++	struct platform_device *spi_pdev;
++	struct spi_board_info boardinfo;
++};
++
++
++MODULE_DESCRIPTION("GPIO based MMC driver");
++MODULE_AUTHOR("Michael Buesch");
++MODULE_LICENSE("GPL");
++
++
++static int gpiommc_boardinfo_setup(struct spi_board_info *bi,
++				   struct spi_master *master,
++				   void *data)
++{
++	struct gpiommc_device *d = data;
++	struct gpiommc_platform_data *pdata = d->pdev->dev.platform_data;
++
++	/* Bind the SPI master to the MMC-SPI host driver. */
++	strlcpy(bi->modalias, "mmc_spi", sizeof(bi->modalias));
++
++	bi->max_speed_hz = pdata->max_bus_speed;
++	bi->bus_num = master->bus_num;
++	bi->mode = pdata->mode;
++
++	return 0;
++}
++
++static int gpiommc_probe(struct platform_device *pdev)
++{
++	struct gpiommc_platform_data *mmc_pdata = pdev->dev.platform_data;
++	struct spi_gpio_platform_data spi_pdata;
++	struct gpiommc_device *d;
++	int err;
++
++	err = -ENXIO;
++	if (!mmc_pdata)
++		goto error;
++
++#ifdef CONFIG_MMC_SPI_MODULE
++	err = request_module("mmc_spi");
++	if (err) {
++		printk(KERN_WARNING PFX
++		       "Failed to request mmc_spi module.\n");
++	}
++#endif /* CONFIG_MMC_SPI_MODULE */
++
++	/* Allocate the GPIO-MMC device */
++	err = -ENOMEM;
++	d = kzalloc(sizeof(*d), GFP_KERNEL);
++	if (!d)
++		goto error;
++	d->pdev = pdev;
++
++	/* Create the SPI-GPIO device */
++	d->spi_pdev = platform_device_alloc(SPI_GPIO_PLATDEV_NAME,
++					    spi_gpio_next_id());
++	if (!d->spi_pdev)
++		goto err_free_d;
++
++	memset(&spi_pdata, 0, sizeof(spi_pdata));
++	spi_pdata.pin_clk = mmc_pdata->pins.gpio_clk;
++	spi_pdata.pin_miso = mmc_pdata->pins.gpio_do;
++	spi_pdata.pin_mosi = mmc_pdata->pins.gpio_di;
++	spi_pdata.pin_cs = mmc_pdata->pins.gpio_cs;
++	spi_pdata.cs_activelow = mmc_pdata->pins.cs_activelow;
++	spi_pdata.no_spi_delay = mmc_pdata->no_spi_delay;
++	spi_pdata.boardinfo_setup = gpiommc_boardinfo_setup;
++	spi_pdata.boardinfo_setup_data = d;
++
++	err = platform_device_add_data(d->spi_pdev, &spi_pdata,
++				       sizeof(spi_pdata));
++	if (err)
++		goto err_free_pdev;
++	err = platform_device_add(d->spi_pdev);
++	if (err)
++		goto err_free_pdata;
++	platform_set_drvdata(pdev, d);
++
++	printk(KERN_INFO PFX "MMC-Card \"%s\" "
++	       "attached to GPIO pins di=%u, do=%u, clk=%u, cs=%u\n",
++	       mmc_pdata->name, mmc_pdata->pins.gpio_di,
++	       mmc_pdata->pins.gpio_do,
++	       mmc_pdata->pins.gpio_clk,
++	       mmc_pdata->pins.gpio_cs);
++
++	return 0;
++
++err_free_pdata:
++	kfree(d->spi_pdev->dev.platform_data);
++	d->spi_pdev->dev.platform_data = NULL;
++err_free_pdev:
++	platform_device_put(d->spi_pdev);
++err_free_d:
++	kfree(d);
++error:
++	return err;
++}
++
++static int gpiommc_remove(struct platform_device *pdev)
++{
++	struct gpiommc_device *d = platform_get_drvdata(pdev);
++	struct gpiommc_platform_data *pdata = d->pdev->dev.platform_data;
++
++	platform_device_unregister(d->spi_pdev);
++	printk(KERN_INFO PFX "GPIO based MMC-Card \"%s\" removed\n",
++	       pdata->name);
++	platform_device_put(d->spi_pdev);
++
++	return 0;
++}
++
++#ifdef CONFIG_GPIOMMC_CONFIGFS
++
++/* A device that was created through configfs */
++struct gpiommc_configfs_device {
++	struct config_item item;
++	/* The platform device, after registration. */
++	struct platform_device *pdev;
++	/* The configuration */
++	struct gpiommc_platform_data pdata;
++};
++
++#define GPIO_INVALID	-1
++
++static inline bool gpiommc_is_registered(struct gpiommc_configfs_device *dev)
++{
++	return (dev->pdev != NULL);
++}
++
++static inline struct gpiommc_configfs_device *ci_to_gpiommc(struct config_item *item)
++{
++	return item ? container_of(item, struct gpiommc_configfs_device, item) : NULL;
++}
++
++static struct configfs_attribute gpiommc_attr_DI = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_data_in",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_DO = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_data_out",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_CLK = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_clock",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_CS = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_chipselect",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_CS_activelow = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_chipselect_activelow",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_spimode = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "spi_mode",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_spidelay = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "spi_delay",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_max_bus_speed = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "max_bus_speed",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_register = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "register",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute *gpiommc_config_attrs[] = {
++	&gpiommc_attr_DI,
++	&gpiommc_attr_DO,
++	&gpiommc_attr_CLK,
++	&gpiommc_attr_CS,
++	&gpiommc_attr_CS_activelow,
++	&gpiommc_attr_spimode,
++	&gpiommc_attr_spidelay,
++	&gpiommc_attr_max_bus_speed,
++	&gpiommc_attr_register,
++	NULL,
++};
++
++static ssize_t gpiommc_config_attr_show(struct config_item *item,
++					struct configfs_attribute *attr,
++					char *page)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++	ssize_t count = 0;
++	unsigned int gpio;
++	int err = 0;
++
++	if (attr == &gpiommc_attr_DI) {
++		gpio = dev->pdata.pins.gpio_di;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_DO) {
++		gpio = dev->pdata.pins.gpio_do;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CLK) {
++		gpio = dev->pdata.pins.gpio_clk;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS) {
++		gpio = dev->pdata.pins.gpio_cs;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS_activelow) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 dev->pdata.pins.cs_activelow);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spimode) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 dev->pdata.mode);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spidelay) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 !dev->pdata.no_spi_delay);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_max_bus_speed) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 dev->pdata.max_bus_speed);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_register) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 gpiommc_is_registered(dev));
++		goto out;
++	}
++	WARN_ON(1);
++	err = -ENOSYS;
++out:
++	return err ? err : count;
++}
++
++static int gpiommc_do_register(struct gpiommc_configfs_device *dev,
++			       const char *name)
++{
++	int err;
++
++	if (gpiommc_is_registered(dev))
++		return 0;
++
++	if (!gpio_is_valid(dev->pdata.pins.gpio_di) ||
++	    !gpio_is_valid(dev->pdata.pins.gpio_do) ||
++	    !gpio_is_valid(dev->pdata.pins.gpio_clk) ||
++	    !gpio_is_valid(dev->pdata.pins.gpio_cs)) {
++		printk(KERN_ERR PFX
++		       "configfs: Invalid GPIO pin number(s)\n");
++		return -EINVAL;
++	}
++
++	strlcpy(dev->pdata.name, name,
++		sizeof(dev->pdata.name));
++
++	dev->pdev = platform_device_alloc(GPIOMMC_PLATDEV_NAME,
++					  gpiommc_next_id());
++	if (!dev->pdev)
++		return -ENOMEM;
++	err = platform_device_add_data(dev->pdev, &dev->pdata,
++				       sizeof(dev->pdata));
++	if (err) {
++		platform_device_put(dev->pdev);
++		return err;
++	}
++	err = platform_device_add(dev->pdev);
++	if (err) {
++		platform_device_put(dev->pdev);
++		return err;
++	}
++
++	return 0;
++}
++
++static void gpiommc_do_unregister(struct gpiommc_configfs_device *dev)
++{
++	if (!gpiommc_is_registered(dev))
++		return;
++
++	platform_device_unregister(dev->pdev);
++	dev->pdev = NULL;
++}
++
++static ssize_t gpiommc_config_attr_store(struct config_item *item,
++					 struct configfs_attribute *attr,
++					 const char *page, size_t count)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++	int err = -EINVAL;
++	unsigned long data;
++
++	if (attr == &gpiommc_attr_register) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data == 1)
++			err = gpiommc_do_register(dev, item->ci_name);
++		if (data == 0) {
++			gpiommc_do_unregister(dev);
++			err = 0;
++		}
++		goto out;
++	}
++
++	if (gpiommc_is_registered(dev)) {
++		/* The rest of the config parameters can only be set
++		 * as long as the device is not registered, yet. */
++		err = -EBUSY;
++		goto out;
++	}
++
++	if (attr == &gpiommc_attr_DI) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_di = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_DO) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_do = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CLK) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_clk = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_cs = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS_activelow) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data != 0 && data != 1)
++			goto out;
++		dev->pdata.pins.cs_activelow = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spimode) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		switch (data) {
++		case 0:
++			dev->pdata.mode = SPI_MODE_0;
++			break;
++		case 1:
++			dev->pdata.mode = SPI_MODE_1;
++			break;
++		case 2:
++			dev->pdata.mode = SPI_MODE_2;
++			break;
++		case 3:
++			dev->pdata.mode = SPI_MODE_3;
++			break;
++		default:
++			goto out;
++		}
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spidelay) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data != 0 && data != 1)
++			goto out;
++		dev->pdata.no_spi_delay = !data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_max_bus_speed) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data > UINT_MAX)
++			goto out;
++		dev->pdata.max_bus_speed = data;
++		err = 0;
++		goto out;
++	}
++	WARN_ON(1);
++	err = -ENOSYS;
++out:
++	return err ? err : count;
++}
++
++static void gpiommc_config_item_release(struct config_item *item)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++
++	kfree(dev);
++}
++
++static struct configfs_item_operations gpiommc_config_item_ops = {
++	.release		= gpiommc_config_item_release,
++	.show_attribute		= gpiommc_config_attr_show,
++	.store_attribute	= gpiommc_config_attr_store,
++};
++
++static struct config_item_type gpiommc_dev_ci_type = {
++	.ct_item_ops	= &gpiommc_config_item_ops,
++	.ct_attrs	= gpiommc_config_attrs,
++	.ct_owner	= THIS_MODULE,
++};
++
++static struct config_item *gpiommc_make_item(struct config_group *group,
++					     const char *name)
++{
++	struct gpiommc_configfs_device *dev;
++
++	if (strlen(name) > GPIOMMC_MAX_NAMELEN) {
++		printk(KERN_ERR PFX "configfs: device name too long\n");
++		return NULL;
++	}
++
++	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
++	if (!dev)
++		return NULL;
++
++	config_item_init_type_name(&dev->item, name,
++				   &gpiommc_dev_ci_type);
++
++	/* Assign default configuration */
++	dev->pdata.pins.gpio_di = GPIO_INVALID;
++	dev->pdata.pins.gpio_do = GPIO_INVALID;
++	dev->pdata.pins.gpio_clk = GPIO_INVALID;
++	dev->pdata.pins.gpio_cs = GPIO_INVALID;
++	dev->pdata.pins.cs_activelow = 1;
++	dev->pdata.mode = SPI_MODE_0;
++	dev->pdata.no_spi_delay = 0;
++	dev->pdata.max_bus_speed = 5000000; /* 5 MHz */
++
++	return &(dev->item);
++}
++
++static void gpiommc_drop_item(struct config_group *group,
++			      struct config_item *item)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++
++	gpiommc_do_unregister(dev);
++	kfree(dev);
++}
++
++static struct configfs_group_operations gpiommc_ct_group_ops = {
++	.make_item	= gpiommc_make_item,
++	.drop_item	= gpiommc_drop_item,
++};
++
++static struct config_item_type gpiommc_ci_type = {
++	.ct_group_ops	= &gpiommc_ct_group_ops,
++	.ct_owner	= THIS_MODULE,
++};
++
++static struct configfs_subsystem gpiommc_subsys = {
++	.su_group = {
++		.cg_item = {
++			.ci_namebuf = GPIOMMC_PLATDEV_NAME,
++			.ci_type = &gpiommc_ci_type,
++		},
++	},
++	.su_mutex = __MUTEX_INITIALIZER(gpiommc_subsys.su_mutex),
++};
++
++#endif /* CONFIG_GPIOMMC_CONFIGFS */
++
++static struct platform_driver gpiommc_plat_driver = {
++	.probe	= gpiommc_probe,
++	.remove	= gpiommc_remove,
++	.driver	= {
++		.name	= GPIOMMC_PLATDEV_NAME,
++		.owner	= THIS_MODULE,
++	},
++};
++
++int gpiommc_next_id(void)
++{
++	static atomic_t counter = ATOMIC_INIT(-1);
++
++	return atomic_inc_return(&counter);
++}
++EXPORT_SYMBOL(gpiommc_next_id);
++
++static int __init gpiommc_modinit(void)
++{
++	int err;
++
++	err = platform_driver_register(&gpiommc_plat_driver);
++	if (err)
++		return err;
++
++#ifdef CONFIG_GPIOMMC_CONFIGFS
++	config_group_init(&gpiommc_subsys.su_group);
++	err = configfs_register_subsystem(&gpiommc_subsys);
++	if (err) {
++		platform_driver_unregister(&gpiommc_plat_driver);
++		return err;
++	}
++#endif /* CONFIG_GPIOMMC_CONFIGFS */
++
++	return 0;
++}
++module_init(gpiommc_modinit);
++
++static void __exit gpiommc_modexit(void)
++{
++#ifdef CONFIG_GPIOMMC_CONFIGFS
++	configfs_unregister_subsystem(&gpiommc_subsys);
++#endif
++	platform_driver_unregister(&gpiommc_plat_driver);
++}
++module_exit(gpiommc_modexit);
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -370,6 +370,31 @@ config MMC_TMIO
+ 	  This provides support for the SD/MMC cell found in TC6393XB,
+ 	  T7L66XB and also HTC ASIC3
+ 
++config GPIOMMC
++	tristate "MMC/SD over GPIO-based SPI"
++	depends on MMC && MMC_SPI && SPI_GPIO_OLD
++	help
++	  This driver hooks up the mmc_spi and spi_gpio modules so that
++	  MMC/SD cards can be used on a GPIO based bus by bitbanging
++	  the SPI protocol in software.
++
++	  This driver provides a configfs interface to dynamically create
++	  and destroy GPIO-based MMC/SD card devices. It also provides
++	  a platform device interface API.
++	  See Documentation/gpiommc.txt for details.
++
++	  The module will be called gpiommc.
++
++	  If unsure, say N.
++
++config GPIOMMC_CONFIGFS
++	bool
++	depends on GPIOMMC && CONFIGFS_FS
++	default y
++	help
++	  This option automatically enables configfs support for gpiommc
++	  if configfs is available.
++
+ config MMC_CB710
+ 	tristate "ENE CB710 MMC/SD Interface support"
+ 	depends on PCI
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -33,6 +33,7 @@ obj-$(CONFIG_MMC_SDRICOH_CS)	+= sdricoh_
+ obj-$(CONFIG_MMC_TMIO)		+= tmio_mmc.o
+ obj-$(CONFIG_MMC_CB710)	+= cb710-mmc.o
+ obj-$(CONFIG_MMC_VIA_SDMMC)	+= via-sdmmc.o
++obj-$(CONFIG_GPIOMMC)		+= gpiommc.o
+ obj-$(CONFIG_SDH_BFIN)		+= bfin_sdh.o
+ 
+ obj-$(CONFIG_MMC_SDHCI_OF)	+= sdhci-of.o
+--- /dev/null
++++ b/include/linux/mmc/gpiommc.h
+@@ -0,0 +1,71 @@
++/*
++ * Device driver for MMC/SD cards driven over a GPIO bus.
++ *
++ * Copyright (c) 2008 Michael Buesch
++ *
++ * Licensed under the GNU/GPL version 2.
++ */
++#ifndef LINUX_GPIOMMC_H_
++#define LINUX_GPIOMMC_H_
++
++#include <linux/types.h>
++
++
++#define GPIOMMC_MAX_NAMELEN		15
++#define GPIOMMC_MAX_NAMELEN_STR		__stringify(GPIOMMC_MAX_NAMELEN)
++
++/**
++ * struct gpiommc_pins - Hardware pin assignments
++ *
++ * @gpio_di: The GPIO number of the DATA IN pin
++ * @gpio_do: The GPIO number of the DATA OUT pin
++ * @gpio_clk: The GPIO number of the CLOCK pin
++ * @gpio_cs: The GPIO number of the CHIPSELECT pin
++ * @cs_activelow: If true, the chip is considered selected if @gpio_cs is low.
++ */
++struct gpiommc_pins {
++	unsigned int gpio_di;
++	unsigned int gpio_do;
++	unsigned int gpio_clk;
++	unsigned int gpio_cs;
++	bool cs_activelow;
++};
++
++/**
++ * struct gpiommc_platform_data - Platform data for a MMC-over-SPI-GPIO device.
++ *
++ * @name: The unique name string of the device.
++ * @pins: The hardware pin assignments.
++ * @mode: The hardware mode. This is either SPI_MODE_0,
++ *        SPI_MODE_1, SPI_MODE_2 or SPI_MODE_3. See the SPI documentation.
++ * @no_spi_delay: Do not use delays in the lowlevel SPI bitbanging code.
++ *                This is not standards compliant, but may be required for some
++ *                embedded machines to gain reasonable speed.
++ * @max_bus_speed: The maximum speed of the SPI bus, in Hertz.
++ */
++struct gpiommc_platform_data {
++	char name[GPIOMMC_MAX_NAMELEN + 1];
++	struct gpiommc_pins pins;
++	u8 mode;
++	bool no_spi_delay;
++	unsigned int max_bus_speed;
++};
++
++/**
++ * GPIOMMC_PLATDEV_NAME - The platform device name string.
++ *
++ * The name string that has to be used for platform_device_alloc
++ * when allocating a gpiommc device.
++ */
++#define GPIOMMC_PLATDEV_NAME	"gpiommc"
++
++/**
++ * gpiommc_next_id - Get another platform device ID number.
++ *
++ * This returns the next platform device ID number that has to be used
++ * for platform_device_alloc. The ID is opaque and should not be used for
++ * anything else.
++ */
++int gpiommc_next_id(void);
++
++#endif /* LINUX_GPIOMMC_H_ */
+--- /dev/null
++++ b/Documentation/gpiommc.txt
+@@ -0,0 +1,97 @@
++GPIOMMC - Driver for an MMC/SD card on a bitbanging GPIO SPI bus
++================================================================
++
++The gpiommc module hooks up the mmc_spi and spi_gpio modules for running an
++MMC or SD card on GPIO pins.
++
++Two interfaces for registering a new MMC/SD card device are provided:
++A static platform-device based mechanism and a dynamic configfs based interface.
++
++
++Registering devices via platform-device
++=======================================
++
++The platform-device interface is used for registering MMC/SD devices that are
++part of the hardware platform. This is most useful only for embedded machines
++with MMC/SD devices statically connected to the platform GPIO bus.
++
++The data structures are declared in <linux/mmc/gpiommc.h>.
++
++To register a new device, define an instance of struct gpiommc_platform_data.
++This structure holds any information about how the device is hooked up to the
++GPIO pins and what hardware modes the device supports. See the docbook-style
++documentation in the header file for more information on the struct fields.
++
++Then allocate a new instance of a platform device by doing:
++
++	pdev = platform_device_alloc(GPIOMMC_PLATDEV_NAME, gpiommc_next_id());
++
++This will allocate the platform device data structures and hook it up to the
++gpiommc driver.
++Then add the gpiommc_platform_data to the platform device.
++
++	err = platform_device_add_data(pdev, pdata, sizeof(struct gpiommc_platform_data));
++
++You may free the local instance of struct gpiommc_platform_data now. (So the
++struct may be allocated on the stack, too).
++Now simply register the platform device.
++
++	err = platform_device_add(pdev);
++
++Done. The gpiommc probe routine will be invoked now and you should see a kernel
++log message for the added device.
++
++
++Registering devices via configfs
++================================
++
++MMC/SD cards connected via GPIO often are a pretty dynamic thing, as for example
++selfmade hacks for soldering an MMC/SD card to standard GPIO pins on embedded
++hardware are a common situation.
++So we provide a dynamic interface to conveniently handle adding and removing
++devices from userspace, without the need to recompile the kernel.
++
++The "gpiommc" subdirectory at the configfs mountpoint is used for handling
++the dynamic configuration.
++
++To create a new device, it must first be allocated with mkdir.
++The following command will allocate a device named "my_mmc":
++	mkdir /config/gpiommc/my_mmc
++
++There are several configuration files available in the new
++/config/gpiommc/my_mmc/ directory:
++
++gpio_data_in			= The SPI data-IN GPIO pin number.
++gpio_data_out			= The SPI data-OUT GPIO pin number.
++gpio_clock			= The SPI Clock GPIO pin number.
++gpio_chipselect			= The SPI Chipselect GPIO pin number.
++gpio_chipselect_activelow	= Boolean. If 0, Chipselect is active-HIGH.
++				  If 1, Chipselect is active-LOW.
++spi_mode			= The SPI data mode. Can be 0-3.
++spi_delay			= Enable all delays in the lowlevel bitbanging.
++max_bus_speed			= The maximum SPI bus speed. In Hertz.
++
++register			= Not a configuration parameter.
++				  Used to register the configured card
++				  with the kernel.
++
++The device must first get configured and then registered by writing "1" to
++the "register" file.
++The configuration parameters "gpio_data_in", "gpio_data_out", "gpio_clock"
++and "gpio_chipselect" are essential and _must_ be configured before writing
++"1" to the "register" file. The registration will fail, otherwise.
++
++The default values for the other parameters are:
++gpio_chipselect_activelow	= 1		(CS active-LOW)
++spi_mode			= 0		(SPI_MODE_0)
++spi_delay			= 1		(enabled)
++max_bus_speed			= 5000000	(5 Mhz)
++
++Configuration values can not be changed after registration. To unregister
++the device, write a "0" to the "register" file. The configuration can be
++changed again after unregistering.
++
++To completely remove the device, simply rmdir the directory
++(/config/gpiommc/my_mmc in this example).
++There's no need to first unregister the device before removing it. That will
++be done automatically.
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -2540,6 +2540,11 @@ T:	git git://git.kernel.org/pub/scm/linu
+ S:	Maintained
+ F:	drivers/media/video/gspca/
+ 
++GPIOMMC DRIVER
++P:	Michael Buesch
++M:	mb@bu3sch.de
++S:	Maintained
++
+ HARDWARE MONITORING
+ L:	lm-sensors@lm-sensors.org
+ W:	http://www.lm-sensors.org/
diff --git a/target/linux/generic/patches-2.6.34/923-gpiommc-configfs-locking.patch b/target/linux/generic/patches-2.6.34/923-gpiommc-configfs-locking.patch
new file mode 100644
index 0000000000..2e4e820b2b
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/923-gpiommc-configfs-locking.patch
@@ -0,0 +1,58 @@
+The gpiommc configfs context structure needs locking, as configfs
+does not lock access between files.
+
+--- a/drivers/mmc/host/gpiommc.c
++++ b/drivers/mmc/host/gpiommc.c
+@@ -143,6 +143,8 @@ struct gpiommc_configfs_device {
+ 	struct platform_device *pdev;
+ 	/* The configuration */
+ 	struct gpiommc_platform_data pdata;
++	/* Mutex to protect this structure */
++	struct mutex mutex;
+ };
+ 
+ #define GPIO_INVALID	-1
+@@ -233,6 +235,8 @@ static ssize_t gpiommc_config_attr_show(
+ 	unsigned int gpio;
+ 	int err = 0;
+ 
++	mutex_lock(&dev->mutex);
++
+ 	if (attr == &gpiommc_attr_DI) {
+ 		gpio = dev->pdata.pins.gpio_di;
+ 		if (gpio == GPIO_INVALID)
+@@ -293,6 +297,8 @@ static ssize_t gpiommc_config_attr_show(
+ 	WARN_ON(1);
+ 	err = -ENOSYS;
+ out:
++	mutex_unlock(&dev->mutex);
++
+ 	return err ? err : count;
+ }
+ 
+@@ -352,6 +358,8 @@ static ssize_t gpiommc_config_attr_store
+ 	int err = -EINVAL;
+ 	unsigned long data;
+ 
++	mutex_lock(&dev->mutex);
++
+ 	if (attr == &gpiommc_attr_register) {
+ 		err = strict_strtoul(page, 10, &data);
+ 		if (err)
+@@ -477,6 +485,8 @@ static ssize_t gpiommc_config_attr_store
+ 	WARN_ON(1);
+ 	err = -ENOSYS;
+ out:
++	mutex_unlock(&dev->mutex);
++
+ 	return err ? err : count;
+ }
+ 
+@@ -513,6 +523,7 @@ static struct config_item *gpiommc_make_
+ 	if (!dev)
+ 		return NULL;
+ 
++	mutex_init(&dev->mutex);
+ 	config_item_init_type_name(&dev->item, name,
+ 				   &gpiommc_dev_ci_type);
+ 
diff --git a/target/linux/generic/patches-2.6.34/924-cs5535_gpio.patch b/target/linux/generic/patches-2.6.34/924-cs5535_gpio.patch
new file mode 100644
index 0000000000..9081be84a4
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/924-cs5535_gpio.patch
@@ -0,0 +1,102 @@
+--- a/drivers/char/cs5535_gpio.c
++++ b/drivers/char/cs5535_gpio.c
+@@ -15,6 +15,7 @@
+ #include <linux/kernel.h>
+ #include <linux/init.h>
+ #include <linux/cdev.h>
++#include <linux/device.h>
+ #include <linux/ioport.h>
+ #include <linux/pci.h>
+ 
+@@ -48,6 +49,7 @@ static struct pci_device_id divil_pci[]
+ MODULE_DEVICE_TABLE(pci, divil_pci);
+ 
+ static struct cdev cs5535_gpio_cdev;
++static struct class *cs5535_gpio_class;
+ 
+ /* reserve 32 entries even though some aren't usable */
+ #define CS5535_GPIO_COUNT	32
+@@ -66,9 +68,14 @@ static struct gpio_regmap rm[] =
+ 	{ 0x30, 0x00, '1', '0' },	/* GPIOx_READ_BACK / GPIOx_OUT_VAL */
+ 	{ 0x20, 0x20, 'I', 'i' },	/* GPIOx_IN_EN */
+ 	{ 0x04, 0x04, 'O', 'o' },	/* GPIOx_OUT_EN */
++	{ 0x10, 0x10, 'A', 'a' },	/* GPIOx_OUT_AUX1_SEL */
++	{ 0x14, 0x14, 'B', 'b' },	/* GPIOx_OUT_AUX2_SEL */
+ 	{ 0x08, 0x08, 't', 'T' },	/* GPIOx_OUT_OD_EN */
+ 	{ 0x18, 0x18, 'P', 'p' },	/* GPIOx_OUT_PU_EN */
+ 	{ 0x1c, 0x1c, 'D', 'd' },	/* GPIOx_OUT_PD_EN */
++	{ 0x24, 0x24, 'N', 'n' },	/* GPIOx_IN_INV_EN */
++	{ 0x0c, 0x0c, 'X', 'x' },	/* GPIOx_OUT_INV_EN */
++	{ 0x00, 0x00, 'H', 'L' },	/* GPIOx_OUT_VAL */
+ };
+ 
+ 
+@@ -176,7 +183,7 @@ static int __init cs5535_gpio_init(void)
+ {
+ 	dev_t	dev_id;
+ 	u32	low, hi;
+-	int	retval;
++	int	retval, i;
+ 
+ 	if (pci_dev_present(divil_pci) == 0) {
+ 		printk(KERN_WARNING NAME ": DIVIL not found\n");
+@@ -231,23 +238,54 @@ static int __init cs5535_gpio_init(void)
+ 		major = MAJOR(dev_id);
+ 	}
+ 
+-	if (retval) {
+-		release_region(gpio_base, CS5535_GPIO_SIZE);
+-		return -1;
+-	}
++	if (retval)
++		goto error;
+ 
+ 	printk(KERN_DEBUG NAME ": base=%#x mask=%#lx major=%d\n",
+ 	       gpio_base, mask, major);
+ 
+ 	cdev_init(&cs5535_gpio_cdev, &cs5535_gpio_fops);
+-	cdev_add(&cs5535_gpio_cdev, dev_id, CS5535_GPIO_COUNT);
++	retval = cdev_add(&cs5535_gpio_cdev, dev_id, CS5535_GPIO_COUNT);
++	if (retval) {
++		kobject_put(&cs5535_gpio_cdev.kobj);
++		goto error_region;
++	}
++
++	cs5535_gpio_class = class_create(THIS_MODULE, "cs5535_gpio");
++	if (IS_ERR(cs5535_gpio_class)) {
++		printk(KERN_ERR "Error creating cs5535_gpio class\n");
++		cdev_del(&cs5535_gpio_cdev);
++		retval = PTR_ERR(cs5535_gpio_class);
++		goto error_region;
++	}
++
++	for (i = 0; i < CS5535_GPIO_COUNT; i++) {
++		if (mask & (1<<i)) {
++			device_create(cs5535_gpio_class, NULL, MKDEV(major, i), NULL, "cs5535_gpio%d", i);
++		}
++	}
+ 
+ 	return 0;
++
++error_region:
++	unregister_chrdev_region(dev_id, CS5535_GPIO_COUNT);
++error:
++	release_region(gpio_base, CS5535_GPIO_SIZE);
++	return retval;
+ }
+ 
+ static void __exit cs5535_gpio_cleanup(void)
+ {
+ 	dev_t dev_id = MKDEV(major, 0);
++	int i;
++
++	for (i = 0; i < CS5535_GPIO_COUNT; i++) {
++		if (mask & (1<<i)) {
++			device_destroy(cs5535_gpio_class, MKDEV(major, i));
++		}
++	}
++
++	class_destroy(cs5535_gpio_class);
+ 
+ 	cdev_del(&cs5535_gpio_cdev);
+ 	unregister_chrdev_region(dev_id, CS5535_GPIO_COUNT);
diff --git a/target/linux/generic/patches-2.6.34/925-modify-i2c-gpio-initcall-level.patch b/target/linux/generic/patches-2.6.34/925-modify-i2c-gpio-initcall-level.patch
new file mode 100644
index 0000000000..d4926894e6
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/925-modify-i2c-gpio-initcall-level.patch
@@ -0,0 +1,11 @@
+--- a/drivers/i2c/busses/i2c-gpio.c
++++ b/drivers/i2c/busses/i2c-gpio.c
+@@ -211,7 +211,7 @@ static int __init i2c_gpio_init(void)
+ 
+ 	return ret;
+ }
+-module_init(i2c_gpio_init);
++subsys_initcall(i2c_gpio_init);
+ 
+ static void __exit i2c_gpio_exit(void)
+ {
diff --git a/target/linux/generic/patches-2.6.34/940-wireless_mesh_header.patch b/target/linux/generic/patches-2.6.34/940-wireless_mesh_header.patch
new file mode 100644
index 0000000000..33d5299f25
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/940-wireless_mesh_header.patch
@@ -0,0 +1,11 @@
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -138,7 +138,7 @@ static inline bool dev_xmit_complete(int
+  */
+ 
+ #if defined(CONFIG_WLAN) || defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
+-# if defined(CONFIG_MAC80211_MESH)
++# if 1 || defined(CONFIG_MAC80211_MESH)
+ #  define LL_MAX_HEADER 128
+ # else
+ #  define LL_MAX_HEADER 96
diff --git a/target/linux/generic/patches-2.6.34/951-revert_gcc4_4_fixes.patch b/target/linux/generic/patches-2.6.34/951-revert_gcc4_4_fixes.patch
new file mode 100644
index 0000000000..d2c76a8f2b
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/951-revert_gcc4_4_fixes.patch
@@ -0,0 +1,524 @@
+--- a/arch/powerpc/boot/crtsavres.S
++++ /dev/null
+@@ -1,233 +0,0 @@
+-/*
+- * Special support for eabi and SVR4
+- *
+- *   Copyright (C) 1995, 1996, 1998, 2000, 2001 Free Software Foundation, Inc.
+- *   Copyright 2008 Freescale Semiconductor, Inc.
+- *   Written By Michael Meissner
+- *
+- * Based on gcc/config/rs6000/crtsavres.asm from gcc
+- *
+- * This file is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License as published by the
+- * Free Software Foundation; either version 2, or (at your option) any
+- * later version.
+- *
+- * In addition to the permissions in the GNU General Public License, the
+- * Free Software Foundation gives you unlimited permission to link the
+- * compiled version of this file with other programs, and to distribute
+- * those programs without any restriction coming from the use of this
+- * file.  (The General Public License restrictions do apply in other
+- * respects; for example, they cover modification of the file, and
+- * distribution when not linked into another program.)
+- *
+- * This file is distributed in the hope that it will be useful, but
+- * WITHOUT ANY WARRANTY; without even the implied warranty of
+- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+- * General Public License for more details.
+- *
+- * You should have received a copy of the GNU General Public License
+- * along with this program; see the file COPYING.  If not, write to
+- * the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+- * Boston, MA 02110-1301, USA.
+- *
+- *    As a special exception, if you link this library with files
+- *    compiled with GCC to produce an executable, this does not cause
+- *    the resulting executable to be covered by the GNU General Public License.
+- *    This exception does not however invalidate any other reasons why
+- *    the executable file might be covered by the GNU General Public License.
+- */
+-
+-	.file	"crtsavres.S"
+-	.section ".text"
+-
+-/* On PowerPC64 Linux, these functions are provided by the linker.  */
+-#ifndef __powerpc64__
+-
+-#define _GLOBAL(name) \
+-	.type name,@function; \
+-	.globl name; \
+-name:
+-
+-/* Routines for saving integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer save area.  */
+-
+-_GLOBAL(_savegpr_14)
+-_GLOBAL(_save32gpr_14)
+-	stw	14,-72(11)	/* save gp registers */
+-_GLOBAL(_savegpr_15)
+-_GLOBAL(_save32gpr_15)
+-	stw	15,-68(11)
+-_GLOBAL(_savegpr_16)
+-_GLOBAL(_save32gpr_16)
+-	stw	16,-64(11)
+-_GLOBAL(_savegpr_17)
+-_GLOBAL(_save32gpr_17)
+-	stw	17,-60(11)
+-_GLOBAL(_savegpr_18)
+-_GLOBAL(_save32gpr_18)
+-	stw	18,-56(11)
+-_GLOBAL(_savegpr_19)
+-_GLOBAL(_save32gpr_19)
+-	stw	19,-52(11)
+-_GLOBAL(_savegpr_20)
+-_GLOBAL(_save32gpr_20)
+-	stw	20,-48(11)
+-_GLOBAL(_savegpr_21)
+-_GLOBAL(_save32gpr_21)
+-	stw	21,-44(11)
+-_GLOBAL(_savegpr_22)
+-_GLOBAL(_save32gpr_22)
+-	stw	22,-40(11)
+-_GLOBAL(_savegpr_23)
+-_GLOBAL(_save32gpr_23)
+-	stw	23,-36(11)
+-_GLOBAL(_savegpr_24)
+-_GLOBAL(_save32gpr_24)
+-	stw	24,-32(11)
+-_GLOBAL(_savegpr_25)
+-_GLOBAL(_save32gpr_25)
+-	stw	25,-28(11)
+-_GLOBAL(_savegpr_26)
+-_GLOBAL(_save32gpr_26)
+-	stw	26,-24(11)
+-_GLOBAL(_savegpr_27)
+-_GLOBAL(_save32gpr_27)
+-	stw	27,-20(11)
+-_GLOBAL(_savegpr_28)
+-_GLOBAL(_save32gpr_28)
+-	stw	28,-16(11)
+-_GLOBAL(_savegpr_29)
+-_GLOBAL(_save32gpr_29)
+-	stw	29,-12(11)
+-_GLOBAL(_savegpr_30)
+-_GLOBAL(_save32gpr_30)
+-	stw	30,-8(11)
+-_GLOBAL(_savegpr_31)
+-_GLOBAL(_save32gpr_31)
+-	stw	31,-4(11)
+-	blr
+-
+-/* Routines for restoring integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer restore area.  */
+-
+-_GLOBAL(_restgpr_14)
+-_GLOBAL(_rest32gpr_14)
+-	lwz	14,-72(11)	/* restore gp registers */
+-_GLOBAL(_restgpr_15)
+-_GLOBAL(_rest32gpr_15)
+-	lwz	15,-68(11)
+-_GLOBAL(_restgpr_16)
+-_GLOBAL(_rest32gpr_16)
+-	lwz	16,-64(11)
+-_GLOBAL(_restgpr_17)
+-_GLOBAL(_rest32gpr_17)
+-	lwz	17,-60(11)
+-_GLOBAL(_restgpr_18)
+-_GLOBAL(_rest32gpr_18)
+-	lwz	18,-56(11)
+-_GLOBAL(_restgpr_19)
+-_GLOBAL(_rest32gpr_19)
+-	lwz	19,-52(11)
+-_GLOBAL(_restgpr_20)
+-_GLOBAL(_rest32gpr_20)
+-	lwz	20,-48(11)
+-_GLOBAL(_restgpr_21)
+-_GLOBAL(_rest32gpr_21)
+-	lwz	21,-44(11)
+-_GLOBAL(_restgpr_22)
+-_GLOBAL(_rest32gpr_22)
+-	lwz	22,-40(11)
+-_GLOBAL(_restgpr_23)
+-_GLOBAL(_rest32gpr_23)
+-	lwz	23,-36(11)
+-_GLOBAL(_restgpr_24)
+-_GLOBAL(_rest32gpr_24)
+-	lwz	24,-32(11)
+-_GLOBAL(_restgpr_25)
+-_GLOBAL(_rest32gpr_25)
+-	lwz	25,-28(11)
+-_GLOBAL(_restgpr_26)
+-_GLOBAL(_rest32gpr_26)
+-	lwz	26,-24(11)
+-_GLOBAL(_restgpr_27)
+-_GLOBAL(_rest32gpr_27)
+-	lwz	27,-20(11)
+-_GLOBAL(_restgpr_28)
+-_GLOBAL(_rest32gpr_28)
+-	lwz	28,-16(11)
+-_GLOBAL(_restgpr_29)
+-_GLOBAL(_rest32gpr_29)
+-	lwz	29,-12(11)
+-_GLOBAL(_restgpr_30)
+-_GLOBAL(_rest32gpr_30)
+-	lwz	30,-8(11)
+-_GLOBAL(_restgpr_31)
+-_GLOBAL(_rest32gpr_31)
+-	lwz	31,-4(11)
+-	blr
+-
+-/* Routines for restoring integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer restore area.  */
+-
+-_GLOBAL(_restgpr_14_x)
+-_GLOBAL(_rest32gpr_14_x)
+-	lwz	14,-72(11)	/* restore gp registers */
+-_GLOBAL(_restgpr_15_x)
+-_GLOBAL(_rest32gpr_15_x)
+-	lwz	15,-68(11)
+-_GLOBAL(_restgpr_16_x)
+-_GLOBAL(_rest32gpr_16_x)
+-	lwz	16,-64(11)
+-_GLOBAL(_restgpr_17_x)
+-_GLOBAL(_rest32gpr_17_x)
+-	lwz	17,-60(11)
+-_GLOBAL(_restgpr_18_x)
+-_GLOBAL(_rest32gpr_18_x)
+-	lwz	18,-56(11)
+-_GLOBAL(_restgpr_19_x)
+-_GLOBAL(_rest32gpr_19_x)
+-	lwz	19,-52(11)
+-_GLOBAL(_restgpr_20_x)
+-_GLOBAL(_rest32gpr_20_x)
+-	lwz	20,-48(11)
+-_GLOBAL(_restgpr_21_x)
+-_GLOBAL(_rest32gpr_21_x)
+-	lwz	21,-44(11)
+-_GLOBAL(_restgpr_22_x)
+-_GLOBAL(_rest32gpr_22_x)
+-	lwz	22,-40(11)
+-_GLOBAL(_restgpr_23_x)
+-_GLOBAL(_rest32gpr_23_x)
+-	lwz	23,-36(11)
+-_GLOBAL(_restgpr_24_x)
+-_GLOBAL(_rest32gpr_24_x)
+-	lwz	24,-32(11)
+-_GLOBAL(_restgpr_25_x)
+-_GLOBAL(_rest32gpr_25_x)
+-	lwz	25,-28(11)
+-_GLOBAL(_restgpr_26_x)
+-_GLOBAL(_rest32gpr_26_x)
+-	lwz	26,-24(11)
+-_GLOBAL(_restgpr_27_x)
+-_GLOBAL(_rest32gpr_27_x)
+-	lwz	27,-20(11)
+-_GLOBAL(_restgpr_28_x)
+-_GLOBAL(_rest32gpr_28_x)
+-	lwz	28,-16(11)
+-_GLOBAL(_restgpr_29_x)
+-_GLOBAL(_rest32gpr_29_x)
+-	lwz	29,-12(11)
+-_GLOBAL(_restgpr_30_x)
+-_GLOBAL(_rest32gpr_30_x)
+-	lwz	30,-8(11)
+-_GLOBAL(_restgpr_31_x)
+-_GLOBAL(_rest32gpr_31_x)
+-	lwz	0,4(11)
+-	lwz	31,-4(11)
+-	mtlr	0
+-	mr	1,11
+-	blr
+-#endif
+--- a/arch/powerpc/boot/Makefile
++++ b/arch/powerpc/boot/Makefile
+@@ -60,7 +60,7 @@ libfdtheader := fdt.h libfdt.h libfdt_in
+ $(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o): \
+ 	$(addprefix $(obj)/,$(libfdtheader))
+ 
+-src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
++src-wlib := string.S crt0.S stdio.c main.c \
+ 		$(libfdt) libfdt-wrapper.c \
+ 		ns16550.c serial.c simple_alloc.c div64.S util.S \
+ 		gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
+--- a/arch/powerpc/kernel/prom_init_check.sh
++++ b/arch/powerpc/kernel/prom_init_check.sh
+@@ -48,20 +48,6 @@ do
+ 		fi
+ 	done
+ 
+-	# ignore register save/restore funcitons
+-	if [ "${UNDEF:0:9}" = "_restgpr_" ]; then
+-		OK=1
+-	fi
+-	if [ "${UNDEF:0:11}" = "_rest32gpr_" ]; then
+-		OK=1
+-	fi
+-	if [ "${UNDEF:0:9}" = "_savegpr_" ]; then
+-		OK=1
+-	fi
+-	if [ "${UNDEF:0:11}" = "_save32gpr_" ]; then
+-		OK=1
+-	fi
+-
+ 	if [ $OK -eq 0 ]; then
+ 		ERROR=1
+ 		echo "Error: External symbol '$UNDEF' referenced" \
+--- a/arch/powerpc/lib/crtsavres.S
++++ /dev/null
+@@ -1,229 +0,0 @@
+-/*
+- * Special support for eabi and SVR4
+- *
+- *   Copyright (C) 1995, 1996, 1998, 2000, 2001 Free Software Foundation, Inc.
+- *   Copyright 2008 Freescale Semiconductor, Inc.
+- *   Written By Michael Meissner
+- *
+- * Based on gcc/config/rs6000/crtsavres.asm from gcc
+- *
+- * This file is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License as published by the
+- * Free Software Foundation; either version 2, or (at your option) any
+- * later version.
+- *
+- * In addition to the permissions in the GNU General Public License, the
+- * Free Software Foundation gives you unlimited permission to link the
+- * compiled version of this file with other programs, and to distribute
+- * those programs without any restriction coming from the use of this
+- * file.  (The General Public License restrictions do apply in other
+- * respects; for example, they cover modification of the file, and
+- * distribution when not linked into another program.)
+- *
+- * This file is distributed in the hope that it will be useful, but
+- * WITHOUT ANY WARRANTY; without even the implied warranty of
+- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+- * General Public License for more details.
+- *
+- * You should have received a copy of the GNU General Public License
+- * along with this program; see the file COPYING.  If not, write to
+- * the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+- * Boston, MA 02110-1301, USA.
+- *
+- *    As a special exception, if you link this library with files
+- *    compiled with GCC to produce an executable, this does not cause
+- *    the resulting executable to be covered by the GNU General Public License.
+- *    This exception does not however invalidate any other reasons why
+- *    the executable file might be covered by the GNU General Public License.
+- */
+-
+-#include <asm/ppc_asm.h>
+-
+-	.file	"crtsavres.S"
+-	.section ".text"
+-
+-#ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+-
+-/* Routines for saving integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer save area.  */
+-
+-_GLOBAL(_savegpr_14)
+-_GLOBAL(_save32gpr_14)
+-	stw	14,-72(11)	/* save gp registers */
+-_GLOBAL(_savegpr_15)
+-_GLOBAL(_save32gpr_15)
+-	stw	15,-68(11)
+-_GLOBAL(_savegpr_16)
+-_GLOBAL(_save32gpr_16)
+-	stw	16,-64(11)
+-_GLOBAL(_savegpr_17)
+-_GLOBAL(_save32gpr_17)
+-	stw	17,-60(11)
+-_GLOBAL(_savegpr_18)
+-_GLOBAL(_save32gpr_18)
+-	stw	18,-56(11)
+-_GLOBAL(_savegpr_19)
+-_GLOBAL(_save32gpr_19)
+-	stw	19,-52(11)
+-_GLOBAL(_savegpr_20)
+-_GLOBAL(_save32gpr_20)
+-	stw	20,-48(11)
+-_GLOBAL(_savegpr_21)
+-_GLOBAL(_save32gpr_21)
+-	stw	21,-44(11)
+-_GLOBAL(_savegpr_22)
+-_GLOBAL(_save32gpr_22)
+-	stw	22,-40(11)
+-_GLOBAL(_savegpr_23)
+-_GLOBAL(_save32gpr_23)
+-	stw	23,-36(11)
+-_GLOBAL(_savegpr_24)
+-_GLOBAL(_save32gpr_24)
+-	stw	24,-32(11)
+-_GLOBAL(_savegpr_25)
+-_GLOBAL(_save32gpr_25)
+-	stw	25,-28(11)
+-_GLOBAL(_savegpr_26)
+-_GLOBAL(_save32gpr_26)
+-	stw	26,-24(11)
+-_GLOBAL(_savegpr_27)
+-_GLOBAL(_save32gpr_27)
+-	stw	27,-20(11)
+-_GLOBAL(_savegpr_28)
+-_GLOBAL(_save32gpr_28)
+-	stw	28,-16(11)
+-_GLOBAL(_savegpr_29)
+-_GLOBAL(_save32gpr_29)
+-	stw	29,-12(11)
+-_GLOBAL(_savegpr_30)
+-_GLOBAL(_save32gpr_30)
+-	stw	30,-8(11)
+-_GLOBAL(_savegpr_31)
+-_GLOBAL(_save32gpr_31)
+-	stw	31,-4(11)
+-	blr
+-
+-/* Routines for restoring integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer restore area.  */
+-
+-_GLOBAL(_restgpr_14)
+-_GLOBAL(_rest32gpr_14)
+-	lwz	14,-72(11)	/* restore gp registers */
+-_GLOBAL(_restgpr_15)
+-_GLOBAL(_rest32gpr_15)
+-	lwz	15,-68(11)
+-_GLOBAL(_restgpr_16)
+-_GLOBAL(_rest32gpr_16)
+-	lwz	16,-64(11)
+-_GLOBAL(_restgpr_17)
+-_GLOBAL(_rest32gpr_17)
+-	lwz	17,-60(11)
+-_GLOBAL(_restgpr_18)
+-_GLOBAL(_rest32gpr_18)
+-	lwz	18,-56(11)
+-_GLOBAL(_restgpr_19)
+-_GLOBAL(_rest32gpr_19)
+-	lwz	19,-52(11)
+-_GLOBAL(_restgpr_20)
+-_GLOBAL(_rest32gpr_20)
+-	lwz	20,-48(11)
+-_GLOBAL(_restgpr_21)
+-_GLOBAL(_rest32gpr_21)
+-	lwz	21,-44(11)
+-_GLOBAL(_restgpr_22)
+-_GLOBAL(_rest32gpr_22)
+-	lwz	22,-40(11)
+-_GLOBAL(_restgpr_23)
+-_GLOBAL(_rest32gpr_23)
+-	lwz	23,-36(11)
+-_GLOBAL(_restgpr_24)
+-_GLOBAL(_rest32gpr_24)
+-	lwz	24,-32(11)
+-_GLOBAL(_restgpr_25)
+-_GLOBAL(_rest32gpr_25)
+-	lwz	25,-28(11)
+-_GLOBAL(_restgpr_26)
+-_GLOBAL(_rest32gpr_26)
+-	lwz	26,-24(11)
+-_GLOBAL(_restgpr_27)
+-_GLOBAL(_rest32gpr_27)
+-	lwz	27,-20(11)
+-_GLOBAL(_restgpr_28)
+-_GLOBAL(_rest32gpr_28)
+-	lwz	28,-16(11)
+-_GLOBAL(_restgpr_29)
+-_GLOBAL(_rest32gpr_29)
+-	lwz	29,-12(11)
+-_GLOBAL(_restgpr_30)
+-_GLOBAL(_rest32gpr_30)
+-	lwz	30,-8(11)
+-_GLOBAL(_restgpr_31)
+-_GLOBAL(_rest32gpr_31)
+-	lwz	31,-4(11)
+-	blr
+-
+-/* Routines for restoring integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer restore area.  */
+-
+-_GLOBAL(_restgpr_14_x)
+-_GLOBAL(_rest32gpr_14_x)
+-	lwz	14,-72(11)	/* restore gp registers */
+-_GLOBAL(_restgpr_15_x)
+-_GLOBAL(_rest32gpr_15_x)
+-	lwz	15,-68(11)
+-_GLOBAL(_restgpr_16_x)
+-_GLOBAL(_rest32gpr_16_x)
+-	lwz	16,-64(11)
+-_GLOBAL(_restgpr_17_x)
+-_GLOBAL(_rest32gpr_17_x)
+-	lwz	17,-60(11)
+-_GLOBAL(_restgpr_18_x)
+-_GLOBAL(_rest32gpr_18_x)
+-	lwz	18,-56(11)
+-_GLOBAL(_restgpr_19_x)
+-_GLOBAL(_rest32gpr_19_x)
+-	lwz	19,-52(11)
+-_GLOBAL(_restgpr_20_x)
+-_GLOBAL(_rest32gpr_20_x)
+-	lwz	20,-48(11)
+-_GLOBAL(_restgpr_21_x)
+-_GLOBAL(_rest32gpr_21_x)
+-	lwz	21,-44(11)
+-_GLOBAL(_restgpr_22_x)
+-_GLOBAL(_rest32gpr_22_x)
+-	lwz	22,-40(11)
+-_GLOBAL(_restgpr_23_x)
+-_GLOBAL(_rest32gpr_23_x)
+-	lwz	23,-36(11)
+-_GLOBAL(_restgpr_24_x)
+-_GLOBAL(_rest32gpr_24_x)
+-	lwz	24,-32(11)
+-_GLOBAL(_restgpr_25_x)
+-_GLOBAL(_rest32gpr_25_x)
+-	lwz	25,-28(11)
+-_GLOBAL(_restgpr_26_x)
+-_GLOBAL(_rest32gpr_26_x)
+-	lwz	26,-24(11)
+-_GLOBAL(_restgpr_27_x)
+-_GLOBAL(_rest32gpr_27_x)
+-	lwz	27,-20(11)
+-_GLOBAL(_restgpr_28_x)
+-_GLOBAL(_rest32gpr_28_x)
+-	lwz	28,-16(11)
+-_GLOBAL(_restgpr_29_x)
+-_GLOBAL(_rest32gpr_29_x)
+-	lwz	29,-12(11)
+-_GLOBAL(_restgpr_30_x)
+-_GLOBAL(_rest32gpr_30_x)
+-	lwz	30,-8(11)
+-_GLOBAL(_restgpr_31_x)
+-_GLOBAL(_rest32gpr_31_x)
+-	lwz	0,4(11)
+-	lwz	31,-4(11)
+-	mtlr	0
+-	mr	1,11
+-	blr
+-#endif
+--- a/arch/powerpc/lib/Makefile
++++ b/arch/powerpc/lib/Makefile
+@@ -13,7 +13,7 @@ CFLAGS_REMOVE_feature-fixups.o = -pg
+ 
+ obj-y			:= string.o alloc.o \
+ 			   checksum_$(CONFIG_WORD_SIZE).o
+-obj-$(CONFIG_PPC32)	+= div64.o copy_32.o crtsavres.o
++obj-$(CONFIG_PPC32)	+= div64.o copy_32.o
+ obj-$(CONFIG_HAS_IOMEM)	+= devres.o
+ 
+ obj-$(CONFIG_PPC64)	+= copypage_64.o copyuser_64.o \
+--- a/arch/powerpc/Makefile
++++ b/arch/powerpc/Makefile
+@@ -92,8 +92,6 @@ endif
+ else
+ 	KBUILD_CFLAGS += $(call cc-option,-mtune=power4)
+ endif
+-else
+-LDFLAGS_MODULE	+= arch/powerpc/lib/crtsavres.o
+ endif
+ 
+ ifeq ($(CONFIG_TUNE_CELL),y)
diff --git a/target/linux/generic/patches-2.6.34/970-ocf_kbuild_integration.patch b/target/linux/generic/patches-2.6.34/970-ocf_kbuild_integration.patch
new file mode 100644
index 0000000000..76413e9cef
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/970-ocf_kbuild_integration.patch
@@ -0,0 +1,20 @@
+--- a/crypto/Kconfig
++++ b/crypto/Kconfig
+@@ -836,3 +836,6 @@ config CRYPTO_ANSI_CPRNG
+ source "drivers/crypto/Kconfig"
+ 
+ endif	# if CRYPTO
++
++source "crypto/ocf/Kconfig"
++
+--- a/crypto/Makefile
++++ b/crypto/Makefile
+@@ -86,6 +86,8 @@ obj-$(CONFIG_CRYPTO_ANSI_CPRNG) += ansi_
+ obj-$(CONFIG_CRYPTO_TEST) += tcrypt.o
+ obj-$(CONFIG_CRYPTO_GHASH) += ghash-generic.o
+ 
++obj-$(CONFIG_OCF_OCF) += ocf/
++
+ #
+ # generic algorithms and the async_tx api
+ #
diff --git a/target/linux/generic/patches-2.6.34/971-ocf_20100325.patch b/target/linux/generic/patches-2.6.34/971-ocf_20100325.patch
new file mode 100644
index 0000000000..c34a7e2657
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/971-ocf_20100325.patch
@@ -0,0 +1,170 @@
+--- a/drivers/char/random.c
++++ b/drivers/char/random.c
+@@ -129,6 +129,9 @@
+  *                                unsigned int value);
+  * 	void add_interrupt_randomness(int irq);
+  *
++ *      void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
++ *      int random_input_wait(void);
++ *
+  * add_input_randomness() uses the input layer interrupt timing, as well as
+  * the event type information from the hardware.
+  *
+@@ -140,6 +143,13 @@
+  * a better measure, since the timing of the disk interrupts are more
+  * unpredictable.
+  *
++ * random_input_words() just provides a raw block of entropy to the input
++ * pool, such as from a hardware entropy generator.
++ *
++ * random_input_wait() suspends the caller until such time as the
++ * entropy pool falls below the write threshold, and returns a count of how
++ * much entropy (in bits) is needed to sustain the pool.
++ *
+  * All of these routines try to estimate how many bits of randomness a
+  * particular randomness source.  They do this by keeping track of the
+  * first and second order deltas of the event timings.
+@@ -714,6 +724,61 @@ void add_disk_randomness(struct gendisk
+ }
+ #endif
+ 
++/*
++ * random_input_words - add bulk entropy to pool
++ *
++ * @buf: buffer to add
++ * @wordcount: number of __u32 words to add
++ * @ent_count: total amount of entropy (in bits) to credit
++ *
++ * this provides bulk input of entropy to the input pool
++ *
++ */
++void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
++{
++	mix_pool_bytes(&input_pool, buf, wordcount*4);
++
++	credit_entropy_bits(&input_pool, ent_count);
++
++	DEBUG_ENT("crediting %d bits => %d\n",
++		  ent_count, input_pool.entropy_count);
++	/*
++	 * Wake up waiting processes if we have enough
++	 * entropy.
++	 */
++	if (input_pool.entropy_count >= random_read_wakeup_thresh)
++		wake_up_interruptible(&random_read_wait);
++}
++EXPORT_SYMBOL(random_input_words);
++
++/*
++ * random_input_wait - wait until random needs entropy
++ *
++ * this function sleeps until the /dev/random subsystem actually
++ * needs more entropy, and then return the amount of entropy
++ * that it would be nice to have added to the system.
++ */
++int random_input_wait(void)
++{
++	int count;
++
++	wait_event_interruptible(random_write_wait, 
++			 input_pool.entropy_count < random_write_wakeup_thresh);
++
++	count = random_write_wakeup_thresh - input_pool.entropy_count;
++
++        /* likely we got woken up due to a signal */
++	if (count <= 0) count = random_read_wakeup_thresh; 
++
++	DEBUG_ENT("requesting %d bits from input_wait()er %d<%d\n",
++		  count,
++		  input_pool.entropy_count, random_write_wakeup_thresh);
++
++	return count;
++}
++EXPORT_SYMBOL(random_input_wait);
++
++
+ #define EXTRACT_SIZE 10
+ 
+ /*********************************************************************
+--- a/fs/fcntl.c
++++ b/fs/fcntl.c
+@@ -141,6 +141,7 @@ SYSCALL_DEFINE1(dup, unsigned int, filde
+ 	}
+ 	return ret;
+ }
++EXPORT_SYMBOL(sys_dup);
+ 
+ #define SETFL_MASK (O_APPEND | O_NONBLOCK | O_NDELAY | O_DIRECT | O_NOATIME)
+ 
+--- a/include/linux/miscdevice.h
++++ b/include/linux/miscdevice.h
+@@ -12,6 +12,7 @@
+ #define APOLLO_MOUSE_MINOR	7
+ #define PC110PAD_MINOR		9
+ /*#define ADB_MOUSE_MINOR	10	FIXME OBSOLETE */
++#define CRYPTODEV_MINOR		70	/* /dev/crypto */
+ #define WATCHDOG_MINOR		130	/* Watchdog timer     */
+ #define TEMP_MINOR		131	/* Temperature Sensor */
+ #define RTC_MINOR		135
+--- a/include/linux/random.h
++++ b/include/linux/random.h
+@@ -9,6 +9,7 @@
+ 
+ #include <linux/types.h>
+ #include <linux/ioctl.h>
++#include <linux/types.h> /* for __u32 in user space */
+ #include <linux/irqnr.h>
+ 
+ /* ioctl()'s for the random number generator */
+@@ -34,6 +35,30 @@
+ /* Clear the entropy pool and associated counters.  (Superuser only.) */
+ #define RNDCLEARPOOL	_IO( 'R', 0x06 )
+ 
++#ifdef CONFIG_FIPS_RNG
++
++/* Size of seed value - equal to AES blocksize */
++#define AES_BLOCK_SIZE_BYTES	16
++#define SEED_SIZE_BYTES			AES_BLOCK_SIZE_BYTES
++/* Size of AES key */
++#define KEY_SIZE_BYTES		16
++
++/* ioctl() structure used by FIPS 140-2 Tests */
++struct rand_fips_test {
++	unsigned char key[KEY_SIZE_BYTES];			/* Input */
++	unsigned char datetime[SEED_SIZE_BYTES];	/* Input */
++	unsigned char seed[SEED_SIZE_BYTES];		/* Input */
++	unsigned char result[SEED_SIZE_BYTES];		/* Output */
++};
++
++/* FIPS 140-2 RNG Variable Seed Test. (Superuser only.) */
++#define RNDFIPSVST	_IOWR('R', 0x10, struct rand_fips_test)
++
++/* FIPS 140-2 RNG Monte Carlo Test. (Superuser only.) */
++#define RNDFIPSMCT	_IOWR('R', 0x11, struct rand_fips_test)
++
++#endif /* #ifdef CONFIG_FIPS_RNG */
++
+ struct rand_pool_info {
+ 	int	entropy_count;
+ 	int	buf_size;
+@@ -50,6 +75,10 @@ extern void add_input_randomness(unsigne
+ 				 unsigned int value);
+ extern void add_interrupt_randomness(int irq);
+ 
++extern void random_input_words(__u32 *buf, size_t wordcount, int ent_count);
++extern int random_input_wait(void);
++#define HAS_RANDOM_INPUT_WAIT 1
++
+ extern void get_random_bytes(void *buf, int nbytes);
+ void generate_random_uuid(unsigned char uuid_out[16]);
+ 
+--- a/kernel/pid.c
++++ b/kernel/pid.c
+@@ -389,6 +389,7 @@ struct task_struct *find_task_by_vpid(pi
+ {
+ 	return find_task_by_pid_ns(vnr, current->nsproxy->pid_ns);
+ }
++EXPORT_SYMBOL(find_task_by_vpid);
+ 
+ struct pid *get_task_pid(struct task_struct *task, enum pid_type type)
+ {
diff --git a/target/linux/generic/patches-2.6.34/974-ssb_b43_default_on.patch b/target/linux/generic/patches-2.6.34/974-ssb_b43_default_on.patch
new file mode 100644
index 0000000000..3176dcb4d8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/974-ssb_b43_default_on.patch
@@ -0,0 +1,19 @@
+--- a/drivers/ssb/Kconfig
++++ b/drivers/ssb/Kconfig
+@@ -29,6 +29,7 @@ config SSB_SPROM
+ config SSB_BLOCKIO
+ 	bool
+ 	depends on SSB
++	default y
+ 
+ config SSB_PCIHOST_POSSIBLE
+ 	bool
+@@ -49,7 +50,7 @@ config SSB_PCIHOST
+ config SSB_B43_PCI_BRIDGE
+ 	bool
+ 	depends on SSB_PCIHOST
+-	default n
++	default y
+ 
+ config SSB_PCMCIAHOST_POSSIBLE
+ 	bool
diff --git a/target/linux/generic/patches-2.6.34/975-hifn795x-byteswap.patch b/target/linux/generic/patches-2.6.34/975-hifn795x-byteswap.patch
new file mode 100644
index 0000000000..3a37c951ec
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/975-hifn795x-byteswap.patch
@@ -0,0 +1,17 @@
+--- a/drivers/crypto/hifn_795x.c
++++ b/drivers/crypto/hifn_795x.c
+@@ -682,12 +682,12 @@ static inline u32 hifn_read_1(struct hif
+ 
+ static inline void hifn_write_0(struct hifn_device *dev, u32 reg, u32 val)
+ {
+-	writel((__force u32)cpu_to_le32(val), dev->bar[0] + reg);
++	writel(val, dev->bar[0] + reg);
+ }
+ 
+ static inline void hifn_write_1(struct hifn_device *dev, u32 reg, u32 val)
+ {
+-	writel((__force u32)cpu_to_le32(val), dev->bar[1] + reg);
++	writel(val, dev->bar[1] + reg);
+ }
+ 
+ static void hifn_wait_puc(struct hifn_device *dev)
diff --git a/target/linux/generic/patches-2.6.34/975-ssb_update.patch b/target/linux/generic/patches-2.6.34/975-ssb_update.patch
new file mode 100644
index 0000000000..245cec18a9
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/975-ssb_update.patch
@@ -0,0 +1,530 @@
+--- a/drivers/ssb/driver_chipcommon.c
++++ b/drivers/ssb/driver_chipcommon.c
+@@ -233,6 +233,8 @@ void ssb_chipcommon_init(struct ssb_chip
+ {
+ 	if (!cc->dev)
+ 		return; /* We don't have a ChipCommon */
++	if (cc->dev->id.revision >= 11)
++		cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
+ 	ssb_pmu_init(cc);
+ 	chipco_powercontrol_init(cc);
+ 	ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
+@@ -370,6 +372,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c
+ {
+ 	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
+ }
++EXPORT_SYMBOL(ssb_chipco_gpio_control);
+ 
+ u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
+ {
+--- a/drivers/ssb/main.c
++++ b/drivers/ssb/main.c
+@@ -834,6 +834,9 @@ int ssb_bus_pcibus_register(struct ssb_b
+ 	if (!err) {
+ 		ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+ 			   "PCI device %s\n", dev_name(&host_pci->dev));
++	} else {
++		ssb_printk(KERN_ERR PFX "Failed to register PCI version"
++			   " of SSB with error %d\n", err);
+ 	}
+ 
+ 	return err;
+--- a/drivers/ssb/pci.c
++++ b/drivers/ssb/pci.c
+@@ -168,7 +168,7 @@ err_pci:
+ }
+ 
+ /* Get the word-offset for a SSB_SPROM_XXX define. */
+-#define SPOFF(offset)	(((offset) - SSB_SPROM_BASE) / sizeof(u16))
++#define SPOFF(offset)	((offset) / sizeof(u16))
+ /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
+ #define SPEX16(_outvar, _offset, _mask, _shift)	\
+ 	out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
+@@ -254,7 +254,7 @@ static int sprom_do_read(struct ssb_bus
+ 	int i;
+ 
+ 	for (i = 0; i < bus->sprom_size; i++)
+-		sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2));
++		sprom[i] = ioread16(bus->mmio + bus->sprom_offset + (i * 2));
+ 
+ 	return 0;
+ }
+@@ -285,7 +285,7 @@ static int sprom_do_write(struct ssb_bus
+ 			ssb_printk("75%%");
+ 		else if (i % 2)
+ 			ssb_printk(".");
+-		writew(sprom[i], bus->mmio + SSB_SPROM_BASE + (i * 2));
++		writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
+ 		mmiowb();
+ 		msleep(20);
+ 	}
+@@ -621,6 +621,14 @@ static int ssb_pci_sprom_get(struct ssb_
+ 	int err = -ENOMEM;
+ 	u16 *buf;
+ 
++	if (!ssb_is_sprom_available(bus)) {
++		ssb_printk(KERN_ERR PFX "No SPROM available!\n");
++		return -ENODEV;
++	}
++
++	bus->sprom_offset = (bus->chipco.dev->id.revision < 31) ?
++		SSB_SPROM_BASE1 : SSB_SPROM_BASE31;
++
+ 	buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
+ 	if (!buf)
+ 		goto out;
+--- a/drivers/ssb/sprom.c
++++ b/drivers/ssb/sprom.c
+@@ -176,3 +176,17 @@ const struct ssb_sprom *ssb_get_fallback
+ {
+ 	return fallback_sprom;
+ }
++
++/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
++bool ssb_is_sprom_available(struct ssb_bus *bus)
++{
++	/* status register only exists on chipcomon rev >= 11 and we need check
++	   for >= 31 only */
++	/* this routine differs from specs as we do not access SPROM directly
++	   on PCMCIA */
++	if (bus->bustype == SSB_BUSTYPE_PCI &&
++	    bus->chipco.dev->id.revision >= 31)
++		return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM;
++
++	return true;
++}
+--- a/include/linux/ssb/ssb.h
++++ b/include/linux/ssb/ssb.h
+@@ -305,6 +305,7 @@ struct ssb_bus {
+ 	/* ID information about the Chip. */
+ 	u16 chip_id;
+ 	u16 chip_rev;
++	u16 sprom_offset;
+ 	u16 sprom_size;		/* number of words in sprom */
+ 	u8 chip_package;
+ 
+@@ -394,6 +395,9 @@ extern int ssb_bus_sdiobus_register(stru
+ 
+ extern void ssb_bus_unregister(struct ssb_bus *bus);
+ 
++/* Does the device have an SPROM? */
++extern bool ssb_is_sprom_available(struct ssb_bus *bus);
++
+ /* Set a fallback SPROM.
+  * See kdoc at the function definition for complete documentation. */
+ extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
+--- a/include/linux/ssb/ssb_driver_chipcommon.h
++++ b/include/linux/ssb/ssb_driver_chipcommon.h
+@@ -53,6 +53,7 @@
+ #define  SSB_CHIPCO_CAP_64BIT		0x08000000	/* 64-bit Backplane */
+ #define  SSB_CHIPCO_CAP_PMU		0x10000000	/* PMU available (rev >= 20) */
+ #define  SSB_CHIPCO_CAP_ECI		0x20000000	/* ECI available (rev >= 20) */
++#define  SSB_CHIPCO_CAP_SPROM		0x40000000	/* SPROM present */
+ #define SSB_CHIPCO_CORECTL		0x0008
+ #define  SSB_CHIPCO_CORECTL_UARTCLK0	0x00000001	/* Drive UART with internal clock */
+ #define	 SSB_CHIPCO_CORECTL_SE		0x00000002	/* sync clk out enable (corerev >= 3) */
+@@ -385,6 +386,7 @@
+ 
+ 
+ /** Chip specific Chip-Status register contents. */
++#define SSB_CHIPCO_CHST_4322_SPROM_EXISTS	0x00000040 /* SPROM present */
+ #define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL	0x00000003
+ #define SSB_CHIPCO_CHST_4325_DEFCIS_SEL		0 /* OTP is powered up, use def. CIS, no SPROM */
+ #define SSB_CHIPCO_CHST_4325_SPROM_SEL		1 /* OTP is powered up, SPROM is present */
+@@ -398,6 +400,18 @@
+ #define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT	4
+ #define SSB_CHIPCO_CHST_4325_PMUTOP_2B 		0x00000200 /* 1 for 2b, 0 for to 2a */
+ 
++/** Macros to determine SPROM presence based on Chip-Status register. */
++#define SSB_CHIPCO_CHST_4312_SPROM_PRESENT(status) \
++	((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
++		SSB_CHIPCO_CHST_4325_OTP_SEL)
++#define SSB_CHIPCO_CHST_4322_SPROM_PRESENT(status) \
++	(status & SSB_CHIPCO_CHST_4322_SPROM_EXISTS)
++#define SSB_CHIPCO_CHST_4325_SPROM_PRESENT(status) \
++	(((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
++		SSB_CHIPCO_CHST_4325_DEFCIS_SEL) && \
++	 ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
++		SSB_CHIPCO_CHST_4325_OTP_SEL))
++
+ 
+ 
+ /** Clockcontrol masks and values **/
+@@ -564,6 +578,7 @@ struct ssb_chipcommon_pmu {
+ struct ssb_chipcommon {
+ 	struct ssb_device *dev;
+ 	u32 capabilities;
++	u32 status;
+ 	/* Fast Powerup Delay constant */
+ 	u16 fast_pwrup_delay;
+ 	struct ssb_chipcommon_pmu pmu;
+--- a/include/linux/ssb/ssb_regs.h
++++ b/include/linux/ssb/ssb_regs.h
+@@ -170,26 +170,27 @@
+ #define SSB_SPROMSIZE_WORDS_R4		220
+ #define SSB_SPROMSIZE_BYTES_R123	(SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
+ #define SSB_SPROMSIZE_BYTES_R4		(SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
+-#define SSB_SPROM_BASE			0x1000
+-#define SSB_SPROM_REVISION		0x107E
++#define SSB_SPROM_BASE1			0x1000
++#define SSB_SPROM_BASE31		0x0800
++#define SSB_SPROM_REVISION		0x007E
+ #define  SSB_SPROM_REVISION_REV		0x00FF	/* SPROM Revision number */
+ #define  SSB_SPROM_REVISION_CRC		0xFF00	/* SPROM CRC8 value */
+ #define  SSB_SPROM_REVISION_CRC_SHIFT	8
+ 
+ /* SPROM Revision 1 */
+-#define SSB_SPROM1_SPID			0x1004	/* Subsystem Product ID for PCI */
+-#define SSB_SPROM1_SVID			0x1006	/* Subsystem Vendor ID for PCI */
+-#define SSB_SPROM1_PID			0x1008	/* Product ID for PCI */
+-#define SSB_SPROM1_IL0MAC		0x1048	/* 6 bytes MAC address for 802.11b/g */
+-#define SSB_SPROM1_ET0MAC		0x104E	/* 6 bytes MAC address for Ethernet */
+-#define SSB_SPROM1_ET1MAC		0x1054	/* 6 bytes MAC address for 802.11a */
+-#define SSB_SPROM1_ETHPHY		0x105A	/* Ethernet PHY settings */
++#define SSB_SPROM1_SPID			0x0004	/* Subsystem Product ID for PCI */
++#define SSB_SPROM1_SVID			0x0006	/* Subsystem Vendor ID for PCI */
++#define SSB_SPROM1_PID			0x0008	/* Product ID for PCI */
++#define SSB_SPROM1_IL0MAC		0x0048	/* 6 bytes MAC address for 802.11b/g */
++#define SSB_SPROM1_ET0MAC		0x004E	/* 6 bytes MAC address for Ethernet */
++#define SSB_SPROM1_ET1MAC		0x0054	/* 6 bytes MAC address for 802.11a */
++#define SSB_SPROM1_ETHPHY		0x005A	/* Ethernet PHY settings */
+ #define  SSB_SPROM1_ETHPHY_ET0A		0x001F	/* MII Address for enet0 */
+ #define  SSB_SPROM1_ETHPHY_ET1A		0x03E0	/* MII Address for enet1 */
+ #define  SSB_SPROM1_ETHPHY_ET1A_SHIFT	5
+ #define  SSB_SPROM1_ETHPHY_ET0M		(1<<14)	/* MDIO for enet0 */
+ #define  SSB_SPROM1_ETHPHY_ET1M		(1<<15)	/* MDIO for enet1 */
+-#define SSB_SPROM1_BINF			0x105C	/* Board info */
++#define SSB_SPROM1_BINF			0x005C	/* Board info */
+ #define  SSB_SPROM1_BINF_BREV		0x00FF	/* Board Revision */
+ #define  SSB_SPROM1_BINF_CCODE		0x0F00	/* Country Code */
+ #define  SSB_SPROM1_BINF_CCODE_SHIFT	8
+@@ -197,63 +198,63 @@
+ #define  SSB_SPROM1_BINF_ANTBG_SHIFT	12
+ #define  SSB_SPROM1_BINF_ANTA		0xC000	/* Available A-PHY antennas */
+ #define  SSB_SPROM1_BINF_ANTA_SHIFT	14
+-#define SSB_SPROM1_PA0B0		0x105E
+-#define SSB_SPROM1_PA0B1		0x1060
+-#define SSB_SPROM1_PA0B2		0x1062
+-#define SSB_SPROM1_GPIOA		0x1064	/* General Purpose IO pins 0 and 1 */
++#define SSB_SPROM1_PA0B0		0x005E
++#define SSB_SPROM1_PA0B1		0x0060
++#define SSB_SPROM1_PA0B2		0x0062
++#define SSB_SPROM1_GPIOA		0x0064	/* General Purpose IO pins 0 and 1 */
+ #define  SSB_SPROM1_GPIOA_P0		0x00FF	/* Pin 0 */
+ #define  SSB_SPROM1_GPIOA_P1		0xFF00	/* Pin 1 */
+ #define  SSB_SPROM1_GPIOA_P1_SHIFT	8
+-#define SSB_SPROM1_GPIOB		0x1066	/* General Purpuse IO pins 2 and 3 */
++#define SSB_SPROM1_GPIOB		0x0066	/* General Purpuse IO pins 2 and 3 */
+ #define  SSB_SPROM1_GPIOB_P2		0x00FF	/* Pin 2 */
+ #define  SSB_SPROM1_GPIOB_P3		0xFF00	/* Pin 3 */
+ #define  SSB_SPROM1_GPIOB_P3_SHIFT	8
+-#define SSB_SPROM1_MAXPWR		0x1068	/* Power Amplifier Max Power */
++#define SSB_SPROM1_MAXPWR		0x0068	/* Power Amplifier Max Power */
+ #define  SSB_SPROM1_MAXPWR_BG		0x00FF	/* B-PHY and G-PHY (in dBm Q5.2) */
+ #define  SSB_SPROM1_MAXPWR_A		0xFF00	/* A-PHY (in dBm Q5.2) */
+ #define  SSB_SPROM1_MAXPWR_A_SHIFT	8
+-#define SSB_SPROM1_PA1B0		0x106A
+-#define SSB_SPROM1_PA1B1		0x106C
+-#define SSB_SPROM1_PA1B2		0x106E
+-#define SSB_SPROM1_ITSSI		0x1070	/* Idle TSSI Target */
++#define SSB_SPROM1_PA1B0		0x006A
++#define SSB_SPROM1_PA1B1		0x006C
++#define SSB_SPROM1_PA1B2		0x006E
++#define SSB_SPROM1_ITSSI		0x0070	/* Idle TSSI Target */
+ #define  SSB_SPROM1_ITSSI_BG		0x00FF	/* B-PHY and G-PHY*/
+ #define  SSB_SPROM1_ITSSI_A		0xFF00	/* A-PHY */
+ #define  SSB_SPROM1_ITSSI_A_SHIFT	8
+-#define SSB_SPROM1_BFLLO		0x1072	/* Boardflags (low 16 bits) */
+-#define SSB_SPROM1_AGAIN		0x1074	/* Antenna Gain (in dBm Q5.2) */
++#define SSB_SPROM1_BFLLO		0x0072	/* Boardflags (low 16 bits) */
++#define SSB_SPROM1_AGAIN		0x0074	/* Antenna Gain (in dBm Q5.2) */
+ #define  SSB_SPROM1_AGAIN_BG		0x00FF	/* B-PHY and G-PHY */
+ #define  SSB_SPROM1_AGAIN_BG_SHIFT	0
+ #define  SSB_SPROM1_AGAIN_A		0xFF00	/* A-PHY */
+ #define  SSB_SPROM1_AGAIN_A_SHIFT	8
+ 
+ /* SPROM Revision 2 (inherits from rev 1) */
+-#define SSB_SPROM2_BFLHI		0x1038	/* Boardflags (high 16 bits) */
+-#define SSB_SPROM2_MAXP_A		0x103A	/* A-PHY Max Power */
++#define SSB_SPROM2_BFLHI		0x0038	/* Boardflags (high 16 bits) */
++#define SSB_SPROM2_MAXP_A		0x003A	/* A-PHY Max Power */
+ #define  SSB_SPROM2_MAXP_A_HI		0x00FF	/* Max Power High */
+ #define  SSB_SPROM2_MAXP_A_LO		0xFF00	/* Max Power Low */
+ #define  SSB_SPROM2_MAXP_A_LO_SHIFT	8
+-#define SSB_SPROM2_PA1LOB0		0x103C	/* A-PHY PowerAmplifier Low Settings */
+-#define SSB_SPROM2_PA1LOB1		0x103E	/* A-PHY PowerAmplifier Low Settings */
+-#define SSB_SPROM2_PA1LOB2		0x1040	/* A-PHY PowerAmplifier Low Settings */
+-#define SSB_SPROM2_PA1HIB0		0x1042	/* A-PHY PowerAmplifier High Settings */
+-#define SSB_SPROM2_PA1HIB1		0x1044	/* A-PHY PowerAmplifier High Settings */
+-#define SSB_SPROM2_PA1HIB2		0x1046	/* A-PHY PowerAmplifier High Settings */
+-#define SSB_SPROM2_OPO			0x1078	/* OFDM Power Offset from CCK Level */
++#define SSB_SPROM2_PA1LOB0		0x003C	/* A-PHY PowerAmplifier Low Settings */
++#define SSB_SPROM2_PA1LOB1		0x003E	/* A-PHY PowerAmplifier Low Settings */
++#define SSB_SPROM2_PA1LOB2		0x0040	/* A-PHY PowerAmplifier Low Settings */
++#define SSB_SPROM2_PA1HIB0		0x0042	/* A-PHY PowerAmplifier High Settings */
++#define SSB_SPROM2_PA1HIB1		0x0044	/* A-PHY PowerAmplifier High Settings */
++#define SSB_SPROM2_PA1HIB2		0x0046	/* A-PHY PowerAmplifier High Settings */
++#define SSB_SPROM2_OPO			0x0078	/* OFDM Power Offset from CCK Level */
+ #define  SSB_SPROM2_OPO_VALUE		0x00FF
+ #define  SSB_SPROM2_OPO_UNUSED		0xFF00
+-#define SSB_SPROM2_CCODE		0x107C	/* Two char Country Code */
++#define SSB_SPROM2_CCODE		0x007C	/* Two char Country Code */
+ 
+ /* SPROM Revision 3 (inherits most data from rev 2) */
+-#define SSB_SPROM3_IL0MAC		0x104A	/* 6 bytes MAC address for 802.11b/g */
+-#define SSB_SPROM3_OFDMAPO		0x102C	/* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
+-#define SSB_SPROM3_OFDMALPO		0x1030	/* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
+-#define SSB_SPROM3_OFDMAHPO		0x1034	/* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
+-#define SSB_SPROM3_GPIOLDC		0x1042	/* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
++#define SSB_SPROM3_OFDMAPO		0x002C	/* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
++#define SSB_SPROM3_OFDMALPO		0x0030	/* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
++#define SSB_SPROM3_OFDMAHPO		0x0034	/* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
++#define SSB_SPROM3_GPIOLDC		0x0042	/* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
+ #define  SSB_SPROM3_GPIOLDC_OFF		0x0000FF00	/* Off Count */
+ #define  SSB_SPROM3_GPIOLDC_OFF_SHIFT	8
+ #define  SSB_SPROM3_GPIOLDC_ON		0x00FF0000	/* On Count */
+ #define  SSB_SPROM3_GPIOLDC_ON_SHIFT	16
+-#define SSB_SPROM3_CCKPO		0x1078	/* CCK Power Offset */
++#define SSB_SPROM3_IL0MAC		0x004A	/* 6 bytes MAC address for 802.11b/g */
++#define SSB_SPROM3_CCKPO		0x0078	/* CCK Power Offset */
+ #define  SSB_SPROM3_CCKPO_1M		0x000F	/* 1M Rate PO */
+ #define  SSB_SPROM3_CCKPO_2M		0x00F0	/* 2M Rate PO */
+ #define  SSB_SPROM3_CCKPO_2M_SHIFT	4
+@@ -264,100 +265,100 @@
+ #define  SSB_SPROM3_OFDMGPO		0x107A	/* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
+ 
+ /* SPROM Revision 4 */
+-#define SSB_SPROM4_IL0MAC		0x104C	/* 6 byte MAC address for a/b/g/n */
+-#define SSB_SPROM4_ETHPHY		0x105A	/* Ethernet PHY settings ?? */
++#define SSB_SPROM4_BFLLO		0x0044	/* Boardflags (low 16 bits) */
++#define SSB_SPROM4_BFLHI		0x0046  /* Board Flags Hi */
++#define SSB_SPROM4_IL0MAC		0x004C	/* 6 byte MAC address for a/b/g/n */
++#define SSB_SPROM4_CCODE		0x0052	/* Country Code (2 bytes) */
++#define SSB_SPROM4_GPIOA		0x0056	/* Gen. Purpose IO # 0 and 1 */
++#define  SSB_SPROM4_GPIOA_P0		0x00FF	/* Pin 0 */
++#define  SSB_SPROM4_GPIOA_P1		0xFF00	/* Pin 1 */
++#define  SSB_SPROM4_GPIOA_P1_SHIFT	8
++#define SSB_SPROM4_GPIOB		0x0058	/* Gen. Purpose IO # 2 and 3 */
++#define  SSB_SPROM4_GPIOB_P2		0x00FF	/* Pin 2 */
++#define  SSB_SPROM4_GPIOB_P3		0xFF00	/* Pin 3 */
++#define  SSB_SPROM4_GPIOB_P3_SHIFT	8
++#define SSB_SPROM4_ETHPHY		0x005A	/* Ethernet PHY settings ?? */
+ #define  SSB_SPROM4_ETHPHY_ET0A		0x001F	/* MII Address for enet0 */
+ #define  SSB_SPROM4_ETHPHY_ET1A		0x03E0	/* MII Address for enet1 */
+ #define  SSB_SPROM4_ETHPHY_ET1A_SHIFT	5
+ #define  SSB_SPROM4_ETHPHY_ET0M		(1<<14)	/* MDIO for enet0 */
+ #define  SSB_SPROM4_ETHPHY_ET1M		(1<<15)	/* MDIO for enet1 */
+-#define SSB_SPROM4_CCODE		0x1052	/* Country Code (2 bytes) */
+-#define SSB_SPROM4_ANTAVAIL		0x105D  /* Antenna available bitfields */
+-#define SSB_SPROM4_ANTAVAIL_A		0x00FF	/* A-PHY bitfield */
+-#define SSB_SPROM4_ANTAVAIL_A_SHIFT	0
+-#define SSB_SPROM4_ANTAVAIL_BG		0xFF00	/* B-PHY and G-PHY bitfield */
+-#define SSB_SPROM4_ANTAVAIL_BG_SHIFT	8
+-#define SSB_SPROM4_BFLLO		0x1044	/* Boardflags (low 16 bits) */
+-#define SSB_SPROM4_AGAIN01		0x105E	/* Antenna Gain (in dBm Q5.2) */
++#define SSB_SPROM4_ANTAVAIL		0x005D  /* Antenna available bitfields */
++#define  SSB_SPROM4_ANTAVAIL_A		0x00FF	/* A-PHY bitfield */
++#define  SSB_SPROM4_ANTAVAIL_A_SHIFT	0
++#define  SSB_SPROM4_ANTAVAIL_BG		0xFF00	/* B-PHY and G-PHY bitfield */
++#define  SSB_SPROM4_ANTAVAIL_BG_SHIFT	8
++#define SSB_SPROM4_AGAIN01		0x005E	/* Antenna Gain (in dBm Q5.2) */
+ #define  SSB_SPROM4_AGAIN0		0x00FF	/* Antenna 0 */
+ #define  SSB_SPROM4_AGAIN0_SHIFT	0
+ #define  SSB_SPROM4_AGAIN1		0xFF00	/* Antenna 1 */
+ #define  SSB_SPROM4_AGAIN1_SHIFT	8
+-#define SSB_SPROM4_AGAIN23		0x1060
++#define SSB_SPROM4_AGAIN23		0x0060
+ #define  SSB_SPROM4_AGAIN2		0x00FF	/* Antenna 2 */
+ #define  SSB_SPROM4_AGAIN2_SHIFT	0
+ #define  SSB_SPROM4_AGAIN3		0xFF00	/* Antenna 3 */
+ #define  SSB_SPROM4_AGAIN3_SHIFT	8
+-#define SSB_SPROM4_BFLHI		0x1046  /* Board Flags Hi */
+-#define SSB_SPROM4_MAXP_BG		0x1080  /* Max Power BG in path 1 */
++#define SSB_SPROM4_MAXP_BG		0x0080  /* Max Power BG in path 1 */
+ #define  SSB_SPROM4_MAXP_BG_MASK	0x00FF  /* Mask for Max Power BG */
+ #define  SSB_SPROM4_ITSSI_BG		0xFF00	/* Mask for path 1 itssi_bg */
+ #define  SSB_SPROM4_ITSSI_BG_SHIFT	8
+-#define SSB_SPROM4_MAXP_A		0x108A  /* Max Power A in path 1 */
++#define SSB_SPROM4_MAXP_A		0x008A  /* Max Power A in path 1 */
+ #define  SSB_SPROM4_MAXP_A_MASK		0x00FF  /* Mask for Max Power A */
+ #define  SSB_SPROM4_ITSSI_A		0xFF00	/* Mask for path 1 itssi_a */
+ #define  SSB_SPROM4_ITSSI_A_SHIFT	8
+-#define SSB_SPROM4_GPIOA		0x1056	/* Gen. Purpose IO # 0 and 1 */
+-#define  SSB_SPROM4_GPIOA_P0		0x00FF	/* Pin 0 */
+-#define  SSB_SPROM4_GPIOA_P1		0xFF00	/* Pin 1 */
+-#define  SSB_SPROM4_GPIOA_P1_SHIFT	8
+-#define SSB_SPROM4_GPIOB		0x1058	/* Gen. Purpose IO # 2 and 3 */
+-#define  SSB_SPROM4_GPIOB_P2		0x00FF	/* Pin 2 */
+-#define  SSB_SPROM4_GPIOB_P3		0xFF00	/* Pin 3 */
+-#define  SSB_SPROM4_GPIOB_P3_SHIFT	8
+-#define SSB_SPROM4_PA0B0		0x1082	/* The paXbY locations are */
+-#define SSB_SPROM4_PA0B1		0x1084	/*   only guesses */
+-#define SSB_SPROM4_PA0B2		0x1086
+-#define SSB_SPROM4_PA1B0		0x108E
+-#define SSB_SPROM4_PA1B1		0x1090
+-#define SSB_SPROM4_PA1B2		0x1092
++#define SSB_SPROM4_PA0B0		0x0082	/* The paXbY locations are */
++#define SSB_SPROM4_PA0B1		0x0084	/*   only guesses */
++#define SSB_SPROM4_PA0B2		0x0086
++#define SSB_SPROM4_PA1B0		0x008E
++#define SSB_SPROM4_PA1B1		0x0090
++#define SSB_SPROM4_PA1B2		0x0092
+ 
+ /* SPROM Revision 5 (inherits most data from rev 4) */
+-#define SSB_SPROM5_BFLLO		0x104A	/* Boardflags (low 16 bits) */
+-#define SSB_SPROM5_BFLHI		0x104C  /* Board Flags Hi */
+-#define SSB_SPROM5_IL0MAC		0x1052	/* 6 byte MAC address for a/b/g/n */
+-#define SSB_SPROM5_CCODE		0x1044	/* Country Code (2 bytes) */
+-#define SSB_SPROM5_GPIOA		0x1076	/* Gen. Purpose IO # 0 and 1 */
++#define SSB_SPROM5_CCODE		0x0044	/* Country Code (2 bytes) */
++#define SSB_SPROM5_BFLLO		0x004A	/* Boardflags (low 16 bits) */
++#define SSB_SPROM5_BFLHI		0x004C  /* Board Flags Hi */
++#define SSB_SPROM5_IL0MAC		0x0052	/* 6 byte MAC address for a/b/g/n */
++#define SSB_SPROM5_GPIOA		0x0076	/* Gen. Purpose IO # 0 and 1 */
+ #define  SSB_SPROM5_GPIOA_P0		0x00FF	/* Pin 0 */
+ #define  SSB_SPROM5_GPIOA_P1		0xFF00	/* Pin 1 */
+ #define  SSB_SPROM5_GPIOA_P1_SHIFT	8
+-#define SSB_SPROM5_GPIOB		0x1078	/* Gen. Purpose IO # 2 and 3 */
++#define SSB_SPROM5_GPIOB		0x0078	/* Gen. Purpose IO # 2 and 3 */
+ #define  SSB_SPROM5_GPIOB_P2		0x00FF	/* Pin 2 */
+ #define  SSB_SPROM5_GPIOB_P3		0xFF00	/* Pin 3 */
+ #define  SSB_SPROM5_GPIOB_P3_SHIFT	8
+ 
+ /* SPROM Revision 8 */
+-#define SSB_SPROM8_BOARDREV		0x1082	/* Board revision */
+-#define SSB_SPROM8_BFLLO		0x1084	/* Board flags (bits 0-15) */
+-#define SSB_SPROM8_BFLHI		0x1086	/* Board flags (bits 16-31) */
+-#define SSB_SPROM8_BFL2LO		0x1088	/* Board flags (bits 32-47) */
+-#define SSB_SPROM8_BFL2HI		0x108A	/* Board flags (bits 48-63) */
+-#define SSB_SPROM8_IL0MAC		0x108C	/* 6 byte MAC address */
+-#define SSB_SPROM8_CCODE		0x1092	/* 2 byte country code */
+-#define SSB_SPROM8_ANTAVAIL		0x109C  /* Antenna available bitfields*/
+-#define SSB_SPROM8_ANTAVAIL_A		0xFF00	/* A-PHY bitfield */
+-#define SSB_SPROM8_ANTAVAIL_A_SHIFT	8
+-#define SSB_SPROM8_ANTAVAIL_BG		0x00FF	/* B-PHY and G-PHY bitfield */
+-#define SSB_SPROM8_ANTAVAIL_BG_SHIFT	0
+-#define SSB_SPROM8_AGAIN01		0x109E	/* Antenna Gain (in dBm Q5.2) */
++#define SSB_SPROM8_BOARDREV		0x0082	/* Board revision */
++#define SSB_SPROM8_BFLLO		0x0084	/* Board flags (bits 0-15) */
++#define SSB_SPROM8_BFLHI		0x0086	/* Board flags (bits 16-31) */
++#define SSB_SPROM8_BFL2LO		0x0088	/* Board flags (bits 32-47) */
++#define SSB_SPROM8_BFL2HI		0x008A	/* Board flags (bits 48-63) */
++#define SSB_SPROM8_IL0MAC		0x008C	/* 6 byte MAC address */
++#define SSB_SPROM8_CCODE		0x0092	/* 2 byte country code */
++#define SSB_SPROM8_GPIOA		0x0096	/*Gen. Purpose IO # 0 and 1 */
++#define  SSB_SPROM8_GPIOA_P0		0x00FF	/* Pin 0 */
++#define  SSB_SPROM8_GPIOA_P1		0xFF00	/* Pin 1 */
++#define  SSB_SPROM8_GPIOA_P1_SHIFT	8
++#define SSB_SPROM8_GPIOB		0x0098	/* Gen. Purpose IO # 2 and 3 */
++#define  SSB_SPROM8_GPIOB_P2		0x00FF	/* Pin 2 */
++#define  SSB_SPROM8_GPIOB_P3		0xFF00	/* Pin 3 */
++#define  SSB_SPROM8_GPIOB_P3_SHIFT	8
++#define SSB_SPROM8_ANTAVAIL		0x009C  /* Antenna available bitfields*/
++#define  SSB_SPROM8_ANTAVAIL_A		0xFF00	/* A-PHY bitfield */
++#define  SSB_SPROM8_ANTAVAIL_A_SHIFT	8
++#define  SSB_SPROM8_ANTAVAIL_BG		0x00FF	/* B-PHY and G-PHY bitfield */
++#define  SSB_SPROM8_ANTAVAIL_BG_SHIFT	0
++#define SSB_SPROM8_AGAIN01		0x009E	/* Antenna Gain (in dBm Q5.2) */
+ #define  SSB_SPROM8_AGAIN0		0x00FF	/* Antenna 0 */
+ #define  SSB_SPROM8_AGAIN0_SHIFT	0
+ #define  SSB_SPROM8_AGAIN1		0xFF00	/* Antenna 1 */
+ #define  SSB_SPROM8_AGAIN1_SHIFT	8
+-#define SSB_SPROM8_AGAIN23		0x10A0
++#define SSB_SPROM8_AGAIN23		0x00A0
+ #define  SSB_SPROM8_AGAIN2		0x00FF	/* Antenna 2 */
+ #define  SSB_SPROM8_AGAIN2_SHIFT	0
+ #define  SSB_SPROM8_AGAIN3		0xFF00	/* Antenna 3 */
+ #define  SSB_SPROM8_AGAIN3_SHIFT	8
+-#define SSB_SPROM8_GPIOA		0x1096	/*Gen. Purpose IO # 0 and 1 */
+-#define  SSB_SPROM8_GPIOA_P0		0x00FF	/* Pin 0 */
+-#define  SSB_SPROM8_GPIOA_P1		0xFF00	/* Pin 1 */
+-#define  SSB_SPROM8_GPIOA_P1_SHIFT	8
+-#define SSB_SPROM8_GPIOB		0x1098	/* Gen. Purpose IO # 2 and 3 */
+-#define  SSB_SPROM8_GPIOB_P2		0x00FF	/* Pin 2 */
+-#define  SSB_SPROM8_GPIOB_P3		0xFF00	/* Pin 3 */
+-#define  SSB_SPROM8_GPIOB_P3_SHIFT	8
+-#define SSB_SPROM8_RSSIPARM2G		0x10A4	/* RSSI params for 2GHz */
++#define SSB_SPROM8_RSSIPARM2G		0x00A4	/* RSSI params for 2GHz */
+ #define  SSB_SPROM8_RSSISMF2G		0x000F
+ #define  SSB_SPROM8_RSSISMC2G		0x00F0
+ #define  SSB_SPROM8_RSSISMC2G_SHIFT	4
+@@ -365,7 +366,7 @@
+ #define  SSB_SPROM8_RSSISAV2G_SHIFT	8
+ #define  SSB_SPROM8_BXA2G		0x1800
+ #define  SSB_SPROM8_BXA2G_SHIFT		11
+-#define SSB_SPROM8_RSSIPARM5G		0x10A6	/* RSSI params for 5GHz */
++#define SSB_SPROM8_RSSIPARM5G		0x00A6	/* RSSI params for 5GHz */
+ #define  SSB_SPROM8_RSSISMF5G		0x000F
+ #define  SSB_SPROM8_RSSISMC5G		0x00F0
+ #define  SSB_SPROM8_RSSISMC5G_SHIFT	4
+@@ -373,47 +374,47 @@
+ #define  SSB_SPROM8_RSSISAV5G_SHIFT	8
+ #define  SSB_SPROM8_BXA5G		0x1800
+ #define  SSB_SPROM8_BXA5G_SHIFT		11
+-#define SSB_SPROM8_TRI25G		0x10A8	/* TX isolation 2.4&5.3GHz */
++#define SSB_SPROM8_TRI25G		0x00A8	/* TX isolation 2.4&5.3GHz */
+ #define  SSB_SPROM8_TRI2G		0x00FF	/* TX isolation 2.4GHz */
+ #define  SSB_SPROM8_TRI5G		0xFF00	/* TX isolation 5.3GHz */
+ #define  SSB_SPROM8_TRI5G_SHIFT		8
+-#define SSB_SPROM8_TRI5GHL		0x10AA	/* TX isolation 5.2/5.8GHz */
++#define SSB_SPROM8_TRI5GHL		0x00AA	/* TX isolation 5.2/5.8GHz */
+ #define  SSB_SPROM8_TRI5GL		0x00FF	/* TX isolation 5.2GHz */
+ #define  SSB_SPROM8_TRI5GH		0xFF00	/* TX isolation 5.8GHz */
+ #define  SSB_SPROM8_TRI5GH_SHIFT	8
+-#define SSB_SPROM8_RXPO			0x10AC  /* RX power offsets */
++#define SSB_SPROM8_RXPO			0x00AC  /* RX power offsets */
+ #define  SSB_SPROM8_RXPO2G		0x00FF	/* 2GHz RX power offset */
+ #define  SSB_SPROM8_RXPO5G		0xFF00	/* 5GHz RX power offset */
+ #define  SSB_SPROM8_RXPO5G_SHIFT	8
+-#define SSB_SPROM8_MAXP_BG		0x10C0  /* Max Power 2GHz in path 1 */
++#define SSB_SPROM8_MAXP_BG		0x00C0  /* Max Power 2GHz in path 1 */
+ #define  SSB_SPROM8_MAXP_BG_MASK	0x00FF  /* Mask for Max Power 2GHz */
+ #define  SSB_SPROM8_ITSSI_BG		0xFF00	/* Mask for path 1 itssi_bg */
+ #define  SSB_SPROM8_ITSSI_BG_SHIFT	8
+-#define SSB_SPROM8_PA0B0		0x10C2	/* 2GHz power amp settings */
+-#define SSB_SPROM8_PA0B1		0x10C4
+-#define SSB_SPROM8_PA0B2		0x10C6
+-#define SSB_SPROM8_MAXP_A		0x10C8  /* Max Power 5.3GHz */
++#define SSB_SPROM8_PA0B0		0x00C2	/* 2GHz power amp settings */
++#define SSB_SPROM8_PA0B1		0x00C4
++#define SSB_SPROM8_PA0B2		0x00C6
++#define SSB_SPROM8_MAXP_A		0x00C8  /* Max Power 5.3GHz */
+ #define  SSB_SPROM8_MAXP_A_MASK		0x00FF  /* Mask for Max Power 5.3GHz */
+ #define  SSB_SPROM8_ITSSI_A		0xFF00	/* Mask for path 1 itssi_a */
+ #define  SSB_SPROM8_ITSSI_A_SHIFT	8
+-#define SSB_SPROM8_MAXP_AHL		0x10CA  /* Max Power 5.2/5.8GHz */
++#define SSB_SPROM8_MAXP_AHL		0x00CA  /* Max Power 5.2/5.8GHz */
+ #define  SSB_SPROM8_MAXP_AH_MASK	0x00FF  /* Mask for Max Power 5.8GHz */
+ #define  SSB_SPROM8_MAXP_AL_MASK	0xFF00  /* Mask for Max Power 5.2GHz */
+ #define  SSB_SPROM8_MAXP_AL_SHIFT	8
+-#define SSB_SPROM8_PA1B0		0x10CC	/* 5.3GHz power amp settings */
+-#define SSB_SPROM8_PA1B1		0x10CE
+-#define SSB_SPROM8_PA1B2		0x10D0
+-#define SSB_SPROM8_PA1LOB0		0x10D2	/* 5.2GHz power amp settings */
+-#define SSB_SPROM8_PA1LOB1		0x10D4
+-#define SSB_SPROM8_PA1LOB2		0x10D6
+-#define SSB_SPROM8_PA1HIB0		0x10D8	/* 5.8GHz power amp settings */
+-#define SSB_SPROM8_PA1HIB1		0x10DA
+-#define SSB_SPROM8_PA1HIB2		0x10DC
+-#define SSB_SPROM8_CCK2GPO		0x1140	/* CCK power offset */
+-#define SSB_SPROM8_OFDM2GPO		0x1142	/* 2.4GHz OFDM power offset */
+-#define SSB_SPROM8_OFDM5GPO		0x1146	/* 5.3GHz OFDM power offset */
+-#define SSB_SPROM8_OFDM5GLPO		0x114A	/* 5.2GHz OFDM power offset */
+-#define SSB_SPROM8_OFDM5GHPO		0x114E	/* 5.8GHz OFDM power offset */
++#define SSB_SPROM8_PA1B0		0x00CC	/* 5.3GHz power amp settings */
++#define SSB_SPROM8_PA1B1		0x00CE
++#define SSB_SPROM8_PA1B2		0x00D0
++#define SSB_SPROM8_PA1LOB0		0x00D2	/* 5.2GHz power amp settings */
++#define SSB_SPROM8_PA1LOB1		0x00D4
++#define SSB_SPROM8_PA1LOB2		0x00D6
++#define SSB_SPROM8_PA1HIB0		0x00D8	/* 5.8GHz power amp settings */
++#define SSB_SPROM8_PA1HIB1		0x00DA
++#define SSB_SPROM8_PA1HIB2		0x00DC
++#define SSB_SPROM8_CCK2GPO		0x0140	/* CCK power offset */
++#define SSB_SPROM8_OFDM2GPO		0x0142	/* 2.4GHz OFDM power offset */
++#define SSB_SPROM8_OFDM5GPO		0x0146	/* 5.3GHz OFDM power offset */
++#define SSB_SPROM8_OFDM5GLPO		0x014A	/* 5.2GHz OFDM power offset */
++#define SSB_SPROM8_OFDM5GHPO		0x014E	/* 5.8GHz OFDM power offset */
+ 
+ /* Values for SSB_SPROM1_BINF_CCODE */
+ enum {
diff --git a/target/linux/generic/patches-2.6.34/976-ssb_add_dma_dev.patch b/target/linux/generic/patches-2.6.34/976-ssb_add_dma_dev.patch
new file mode 100644
index 0000000000..b207c094c6
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/976-ssb_add_dma_dev.patch
@@ -0,0 +1,59 @@
+From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
+
+Add dma_dev, a pointer to struct device, to struct ssb_device.  We pass it
+to the generic DMA API with SSB_BUSTYPE_PCI and SSB_BUSTYPE_SSB. 
+ssb_devices_register() sets up it properly.
+
+This is preparation for replacing the ssb bus specific DMA API (ssb_dma_*)
+with the generic DMA API.
+
+Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
+Acked-by: Michael Buesch <mb@bu3sch.de>
+Cc: Gary Zambrano <zambrano@broadcom.com>
+Cc: Stefano Brivio <stefano.brivio@polimi.it>
+Cc: Larry Finger <Larry.Finger@lwfinger.net>
+Cc: John W. Linville <linville@tuxdriver.com>
+Acked-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
+---
+
+ drivers/ssb/main.c      |    2 ++
+ include/linux/ssb/ssb.h |    2 +-
+ 2 files changed, 3 insertions(+), 1 deletion(-)
+
+diff -puN drivers/ssb/main.c~ssb-add-dma_dev-to-ssb_device-structure drivers/ssb/main.c
+--- a/drivers/ssb/main.c~ssb-add-dma_dev-to-ssb_device-structure
++++ a/drivers/ssb/main.c
+@@ -486,6 +486,7 @@ static int ssb_devices_register(struct s
+ #ifdef CONFIG_SSB_PCIHOST
+ 			sdev->irq = bus->host_pci->irq;
+ 			dev->parent = &bus->host_pci->dev;
++			sdev->dma_dev = dev->parent;
+ #endif
+ 			break;
+ 		case SSB_BUSTYPE_PCMCIA:
+@@ -501,6 +502,7 @@ static int ssb_devices_register(struct s
+ 			break;
+ 		case SSB_BUSTYPE_SSB:
+ 			dev->dma_mask = &dev->coherent_dma_mask;
++			sdev->dma_dev = dev;
+ 			break;
+ 		}
+ 
+diff -puN include/linux/ssb/ssb.h~ssb-add-dma_dev-to-ssb_device-structure include/linux/ssb/ssb.h
+--- a/include/linux/ssb/ssb.h~ssb-add-dma_dev-to-ssb_device-structure
++++ a/include/linux/ssb/ssb.h
+@@ -167,7 +167,7 @@ struct ssb_device {
+ 	 * is an optimization. */
+ 	const struct ssb_bus_ops *ops;
+ 
+-	struct device *dev;
++	struct device *dev, *dma_dev;
+ 
+ 	struct ssb_bus *bus;
+ 	struct ssb_device_id id;
+_
+--
+To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
+the body of a message to majordomo@vger.kernel.org
+More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff --git a/target/linux/generic/patches-2.6.34/977-textsearch_kconfig_hacks.patch b/target/linux/generic/patches-2.6.34/977-textsearch_kconfig_hacks.patch
new file mode 100644
index 0000000000..e9577ba5a0
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/977-textsearch_kconfig_hacks.patch
@@ -0,0 +1,23 @@
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -158,16 +158,16 @@ config REED_SOLOMON_DEC16
+ # Textsearch support is select'ed if needed
+ #
+ config TEXTSEARCH
+-	boolean
++	boolean	"Textsearch support"
+ 
+ config TEXTSEARCH_KMP
+-	tristate
++	tristate "Textsearch KMP"
+ 
+ config TEXTSEARCH_BM
+-	tristate
++	tristate "Textsearch BM"
+ 
+ config TEXTSEARCH_FSM
+-	tristate
++	tristate "Textsearch FSM"
+ 
+ config BTREE
+ 	boolean
diff --git a/target/linux/generic/patches-2.6.34/978-lib80211_kconfig_hacks.patch b/target/linux/generic/patches-2.6.34/978-lib80211_kconfig_hacks.patch
new file mode 100644
index 0000000000..c044deac00
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/978-lib80211_kconfig_hacks.patch
@@ -0,0 +1,19 @@
+--- a/net/wireless/Kconfig
++++ b/net/wireless/Kconfig
+@@ -142,13 +142,13 @@ config LIB80211
+ 	  you want this built into your kernel.
+ 
+ config LIB80211_CRYPT_WEP
+-	tristate
++	tristate "LIB80211_CRYPT_WEP"
+ 
+ config LIB80211_CRYPT_CCMP
+-	tristate
++	tristate "LIB80211_CRYPT_CCMP"
+ 
+ config LIB80211_CRYPT_TKIP
+-	tristate
++	tristate "LIB80211_CRYPT_TKIP"
+ 
+ config LIB80211_DEBUG
+ 	bool "lib80211 debugging messages"
diff --git a/target/linux/generic/patches-2.6.34/979-crypto_add_kconfig_prompts.patch b/target/linux/generic/patches-2.6.34/979-crypto_add_kconfig_prompts.patch
new file mode 100644
index 0000000000..b40b2cea96
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/979-crypto_add_kconfig_prompts.patch
@@ -0,0 +1,47 @@
+--- a/crypto/Kconfig
++++ b/crypto/Kconfig
+@@ -32,7 +32,7 @@ config CRYPTO_FIPS
+ 	  option is selected
+ 
+ config CRYPTO_ALGAPI
+-	tristate
++	tristate "ALGAPI"
+ 	select CRYPTO_ALGAPI2
+ 	help
+ 	  This option provides the API for cryptographic algorithms.
+@@ -41,7 +41,7 @@ config CRYPTO_ALGAPI2
+ 	tristate
+ 
+ config CRYPTO_AEAD
+-	tristate
++	tristate "AEAD"
+ 	select CRYPTO_AEAD2
+ 	select CRYPTO_ALGAPI
+ 
+@@ -50,7 +50,7 @@ config CRYPTO_AEAD2
+ 	select CRYPTO_ALGAPI2
+ 
+ config CRYPTO_BLKCIPHER
+-	tristate
++	tristate "BLKCIPHER"
+ 	select CRYPTO_BLKCIPHER2
+ 	select CRYPTO_ALGAPI
+ 
+@@ -61,7 +61,7 @@ config CRYPTO_BLKCIPHER2
+ 	select CRYPTO_WORKQUEUE
+ 
+ config CRYPTO_HASH
+-	tristate
++	tristate "HASH"
+ 	select CRYPTO_HASH2
+ 	select CRYPTO_ALGAPI
+ 
+@@ -70,7 +70,7 @@ config CRYPTO_HASH2
+ 	select CRYPTO_ALGAPI2
+ 
+ config CRYPTO_RNG
+-	tristate
++	tristate "RNG"
+ 	select CRYPTO_RNG2
+ 	select CRYPTO_ALGAPI
+ 
diff --git a/target/linux/generic/patches-2.6.34/980-vm_exports.patch b/target/linux/generic/patches-2.6.34/980-vm_exports.patch
new file mode 100644
index 0000000000..5d0b5c6970
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/980-vm_exports.patch
@@ -0,0 +1,142 @@
+--- a/mm/shmem.c
++++ b/mm/shmem.c
+@@ -29,6 +29,7 @@
+ #include <linux/mm.h>
+ #include <linux/module.h>
+ #include <linux/swap.h>
++#include <linux/ima.h>
+ 
+ static struct vfsmount *shm_mnt;
+ 
+@@ -2620,6 +2621,16 @@ int shmem_lock(struct file *file, int lo
+ 
+ /* common code */
+ 
++void shmem_set_file(struct vm_area_struct *vma, struct file *file)
++{
++	ima_counts_get(file);
++	if (vma->vm_file)
++		fput(vma->vm_file);
++	vma->vm_file = file;
++	vma->vm_ops = &shmem_vm_ops;
++}
++EXPORT_SYMBOL_GPL(shmem_set_file);
++
+ /**
+  * shmem_file_setup - get an unlinked file living in tmpfs
+  * @name: name for dentry (to be seen in /proc/<pid>/maps
+@@ -2697,9 +2708,6 @@ int shmem_zero_setup(struct vm_area_stru
+ 	if (IS_ERR(file))
+ 		return PTR_ERR(file);
+ 
+-	if (vma->vm_file)
+-		fput(vma->vm_file);
+-	vma->vm_file = file;
+-	vma->vm_ops = &shmem_vm_ops;
++	shmem_set_file(vma, file);
+ 	return 0;
+ }
+--- a/fs/file.c
++++ b/fs/file.c
+@@ -271,6 +271,7 @@ int expand_files(struct files_struct *fi
+ 	/* All good, so we try */
+ 	return expand_fdtable(files, nr);
+ }
++EXPORT_SYMBOL_GPL(expand_files);
+ 
+ static int count_open_files(struct fdtable *fdt)
+ {
+--- a/kernel/exit.c
++++ b/kernel/exit.c
+@@ -514,6 +514,7 @@ struct files_struct *get_files_struct(st
+ 
+ 	return files;
+ }
++EXPORT_SYMBOL_GPL(get_files_struct);
+ 
+ void put_files_struct(struct files_struct *files)
+ {
+@@ -535,6 +536,7 @@ void put_files_struct(struct files_struc
+ 		rcu_read_unlock();
+ 	}
+ }
++EXPORT_SYMBOL_GPL(put_files_struct);
+ 
+ void reset_files_struct(struct files_struct *files)
+ {
+--- a/kernel/fork.c
++++ b/kernel/fork.c
+@@ -177,6 +177,7 @@ void __put_task_struct(struct task_struc
+ 	if (!profile_handoff_task(tsk))
+ 		free_task(tsk);
+ }
++EXPORT_SYMBOL_GPL(__put_task_struct);
+ 
+ /*
+  * macro override instead of weak attribute alias, to workaround
+--- a/kernel/sched.c
++++ b/kernel/sched.c
+@@ -4367,6 +4367,7 @@ int can_nice(const struct task_struct *p
+ 	return (nice_rlim <= task_rlimit(p, RLIMIT_NICE) ||
+ 		capable(CAP_SYS_NICE));
+ }
++EXPORT_SYMBOL_GPL(can_nice);
+ 
+ #ifdef __ARCH_WANT_SYS_NICE
+ 
+--- a/mm/memory.c
++++ b/mm/memory.c
+@@ -1203,6 +1203,7 @@ unsigned long zap_page_range(struct vm_a
+ 		tlb_finish_mmu(tlb, address, end);
+ 	return end;
+ }
++EXPORT_SYMBOL_GPL(zap_page_range);
+ 
+ /**
+  * zap_vma_ptes - remove ptes mapping the vma
+@@ -2596,6 +2597,7 @@ int vmtruncate_range(struct inode *inode
+ 
+ 	return 0;
+ }
++EXPORT_SYMBOL_GPL(vmtruncate_range);
+ 
+ /*
+  * We enter with non-exclusive mmap_sem (to exclude vma changes,
+--- a/mm/vmalloc.c
++++ b/mm/vmalloc.c
+@@ -1173,6 +1173,7 @@ void unmap_kernel_range(unsigned long ad
+ 	vunmap_page_range(addr, end);
+ 	flush_tlb_kernel_range(addr, end);
+ }
++EXPORT_SYMBOL_GPL(unmap_kernel_range);
+ 
+ int map_vm_area(struct vm_struct *area, pgprot_t prot, struct page ***pages)
+ {
+@@ -1288,6 +1289,7 @@ struct vm_struct *get_vm_area(unsigned l
+ 	return __get_vm_area_node(size, 1, flags, VMALLOC_START, VMALLOC_END,
+ 				-1, GFP_KERNEL, __builtin_return_address(0));
+ }
++EXPORT_SYMBOL_GPL(get_vm_area);
+ 
+ struct vm_struct *get_vm_area_caller(unsigned long size, unsigned long flags,
+ 				void *caller)
+--- a/include/linux/mm.h
++++ b/include/linux/mm.h
+@@ -728,6 +728,7 @@ extern void show_free_areas(void);
+ 
+ int shmem_lock(struct file *file, int lock, struct user_struct *user);
+ struct file *shmem_file_setup(const char *name, loff_t size, unsigned long flags);
++void shmem_set_file(struct vm_area_struct *vma, struct file *file);
+ int shmem_zero_setup(struct vm_area_struct *);
+ 
+ #ifndef CONFIG_MMU
+--- a/kernel/signal.c
++++ b/kernel/signal.c
+@@ -1121,6 +1121,7 @@ struct sighand_struct *lock_task_sighand
+ 
+ 	return sighand;
+ }
++EXPORT_SYMBOL(lock_task_sighand);
+ 
+ /*
+  * send signal info to all the members of a group
diff --git a/target/linux/generic/patches-2.6.34/981-wireless_ext_kconfig_hack.patch b/target/linux/generic/patches-2.6.34/981-wireless_ext_kconfig_hack.patch
new file mode 100644
index 0000000000..daac5898ae
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/981-wireless_ext_kconfig_hack.patch
@@ -0,0 +1,22 @@
+--- a/net/wireless/Kconfig
++++ b/net/wireless/Kconfig
+@@ -1,5 +1,5 @@
+ config WIRELESS_EXT
+-	bool
++	bool "Wireless extensions"
+ 
+ config WEXT_CORE
+ 	def_bool y
+@@ -11,10 +11,10 @@ config WEXT_PROC
+ 	depends on WEXT_CORE
+ 
+ config WEXT_SPY
+-	bool
++	bool "WEXT_SPY"
+ 
+ config WEXT_PRIV
+-	bool
++	bool "WEXT_PRIV"
+ 
+ config CFG80211
+ 	tristate "cfg80211 - wireless configuration API"
diff --git a/target/linux/generic/patches-2.6.34/985-cris-headers.patch b/target/linux/generic/patches-2.6.34/985-cris-headers.patch
new file mode 100644
index 0000000000..73ede933ba
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/985-cris-headers.patch
@@ -0,0 +1,27 @@
+--- a/arch/cris/include/arch-v10/arch/Kbuild
++++ b/arch/cris/include/arch-v10/arch/Kbuild
+@@ -1,3 +1,5 @@
++header-y += elf.h
++header-y += ptrace.h
+ header-y += user.h
+ header-y += svinto.h
+ header-y += sv_addr_ag.h
+--- a/arch/cris/include/asm/Kbuild
++++ b/arch/cris/include/asm/Kbuild
+@@ -1,11 +1,14 @@
+ include include/asm-generic/Kbuild.asm
+ 
+-header-y += arch-v10/
+-header-y += arch-v32/
++header-y += ../arch-v10/arch/
++header-y += ../arch-v32/arch/
+ 
++header-y += elf.h
+ header-y += ethernet.h
++header-y += page.h
+ header-y += rtc.h
+ header-y += sync_serial.h
++header-y += user.h
+ 
+ unifdef-y += etraxgpio.h
+ unifdef-y += rs485.h
diff --git a/target/linux/generic/patches-2.6.34/991-ppc4xx_optimization.patch b/target/linux/generic/patches-2.6.34/991-ppc4xx_optimization.patch
new file mode 100644
index 0000000000..0efb777809
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/991-ppc4xx_optimization.patch
@@ -0,0 +1,31 @@
+Upstream doesn't optimize the kernel and bootwrappers for ppc44x because
+they still want to support gcc 3.3 -- well, we don't.
+
+--- a/arch/powerpc/Makefile
++++ b/arch/powerpc/Makefile
+@@ -123,7 +123,8 @@ ifeq ($(CONFIG_FUNCTION_TRACER),y)
+ KBUILD_CFLAGS		+= -mno-sched-epilog
+ endif
+ 
+-cpu-as-$(CONFIG_4xx)		+= -Wa,-m405
++cpu-as-$(CONFIG_40x)		+= -Wa,-m405
++cpu-as-$(CONFIG_44x)		+= -Wa,-m440
+ cpu-as-$(CONFIG_6xx)		+= -Wa,-maltivec
+ cpu-as-$(CONFIG_POWER4)		+= -Wa,-maltivec
+ cpu-as-$(CONFIG_E500)		+= -Wa,-me500
+--- a/arch/powerpc/boot/Makefile
++++ b/arch/powerpc/boot/Makefile
+@@ -38,10 +38,10 @@ BOOTCFLAGS	+= -I$(obj) -I$(srctree)/$(ob
+ DTS_FLAGS	?= -p 1024
+ 
+ $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
+-$(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
++$(obj)/ebony.o: BOOTCFLAGS += -mcpu=440
+ $(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405
+-$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
+-$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
++$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=440
++$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440
+ $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
+ $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
+ $(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
diff --git a/target/linux/generic/patches-2.6.34/997-lzo_decompressor_fix.patch b/target/linux/generic/patches-2.6.34/997-lzo_decompressor_fix.patch
new file mode 100644
index 0000000000..450986538d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/997-lzo_decompressor_fix.patch
@@ -0,0 +1,11 @@
+--- a/usr/Kconfig
++++ b/usr/Kconfig
+@@ -75,7 +75,7 @@ config RD_LZMA
+ config RD_LZO
+ 	bool "Support initial ramdisks compressed using LZO" if EMBEDDED
+ 	default !EMBEDDED
+-	depends on BLK_DEV_INITRD
++	depends on BLK_DEV_INITRD && HAVE_KERNEL_LZO
+ 	select DECOMPRESS_LZO
+ 	help
+ 	  Support loading of a LZO encoded initial ramdisk or cpio buffer
diff --git a/target/linux/generic/patches-2.6.34/998-openwrt_lzma_options.patch b/target/linux/generic/patches-2.6.34/998-openwrt_lzma_options.patch
new file mode 100644
index 0000000000..63834d65ea
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/998-openwrt_lzma_options.patch
@@ -0,0 +1,54 @@
+--- a/scripts/Makefile.lib
++++ b/scripts/Makefile.lib
+@@ -238,7 +238,7 @@ cmd_bzip2 = (cat $(filter-out FORCE,$^)
+ 
+ quiet_cmd_lzma = LZMA    $@
+ cmd_lzma = (cat $(filter-out FORCE,$^) | \
+-	lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
++	lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ 	(rm -f $@ ; false)
+ 
+ quiet_cmd_lzo = LZO    $@
+--- a/scripts/gen_initramfs_list.sh
++++ b/scripts/gen_initramfs_list.sh
+@@ -225,7 +225,7 @@ cpio_list=
+ output="/dev/stdout"
+ output_file=""
+ is_cpio_compressed=
+-compr="gzip -9 -f"
++compr="gzip -9 -f -"
+ 
+ arg="$1"
+ case "$arg" in
+@@ -239,9 +239,9 @@ case "$arg" in
+ 		output_file="$1"
+ 		cpio_list="$(mktemp ${TMPDIR:-/tmp}/cpiolist.XXXXXX)"
+ 		output=${cpio_list}
+-		echo "$output_file" | grep -q "\.gz$" && compr="gzip -9 -f"
+-		echo "$output_file" | grep -q "\.bz2$" && compr="bzip2 -9 -f"
+-		echo "$output_file" | grep -q "\.lzma$" && compr="lzma -9 -f"
++		echo "$output_file" | grep -q "\.gz$" && compr="gzip -9 -f -"
++		echo "$output_file" | grep -q "\.bz2$" && compr="bzip2 -9 -f -"
++		echo "$output_file" | grep -q "\.lzma$" && compr="lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so"
+ 		echo "$output_file" | grep -q "\.cpio$" && compr="cat"
+ 		shift
+ 		;;
+@@ -292,7 +292,7 @@ if [ ! -z ${output_file} ]; then
+ 	if [ "${is_cpio_compressed}" = "compressed" ]; then
+ 		cat ${cpio_tfile} > ${output_file}
+ 	else
+-		(cat ${cpio_tfile} | ${compr}  - > ${output_file}) \
++		(cat ${cpio_tfile} | ${compr} > ${output_file}) \
+ 		|| (rm -f ${output_file} ; false)
+ 	fi
+ 	[ -z ${cpio_file} ] && rm ${cpio_tfile}
+--- a/lib/decompress.c
++++ b/lib/decompress.c
+@@ -36,6 +36,7 @@ static const struct compress_format {
+ 	{ {037, 0236}, "gzip", gunzip },
+ 	{ {0x42, 0x5a}, "bzip2", bunzip2 },
+ 	{ {0x5d, 0x00}, "lzma", unlzma },
++	{ {0x6d, 0x00}, "lzma-openwrt", unlzma },
+ 	{ {0x89, 0x4c}, "lzo", unlzo },
+ 	{ {0, 0}, NULL, NULL }
+ };
diff --git a/target/linux/generic/patches-2.6.34/999-use_preinit_as_init.patch b/target/linux/generic/patches-2.6.34/999-use_preinit_as_init.patch
new file mode 100644
index 0000000000..5499f75bc6
--- /dev/null
+++ b/target/linux/generic/patches-2.6.34/999-use_preinit_as_init.patch
@@ -0,0 +1,14 @@
+--- a/init/main.c
++++ b/init/main.c
+@@ -842,10 +842,7 @@ static noinline int init_post(void)
+ 		printk(KERN_WARNING "Failed to execute %s.  Attempting "
+ 					"defaults...\n", execute_command);
+ 	}
+-	run_init_process("/sbin/init");
+-	run_init_process("/etc/init");
+-	run_init_process("/bin/init");
+-	run_init_process("/bin/sh");
++	run_init_process("/etc/preinit");
+ 
+ 	panic("No init found.  Try passing init= option to kernel. "
+ 	      "See Linux Documentation/init.txt for guidance.");
diff --git a/target/linux/generic/patches-2.6.35/006-squashfs_add_lzma.patch b/target/linux/generic/patches-2.6.35/006-squashfs_add_lzma.patch
new file mode 100644
index 0000000000..ef404868e5
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/006-squashfs_add_lzma.patch
@@ -0,0 +1,219 @@
+From f49e1efdd179d54e814ff2a8e8f469496583062c Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Tue, 20 Oct 2009 10:54:36 +0100
+Subject: [PATCH] Squashfs: add LZMA compression
+
+Add support for LZMA compressed filesystems.  This is an initial
+implementation.
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/Kconfig        |    5 ++
+ fs/squashfs/Makefile       |    1 +
+ fs/squashfs/decompressor.c |    4 +
+ fs/squashfs/lzma_wrapper.c |  151 ++++++++++++++++++++++++++++++++++++++++++++
+ fs/squashfs/squashfs.h     |    3 +
+ 5 files changed, 164 insertions(+), 0 deletions(-)
+ create mode 100644 fs/squashfs/lzma_wrapper.c
+
+--- a/fs/squashfs/Kconfig
++++ b/fs/squashfs/Kconfig
+@@ -26,6 +26,11 @@ config SQUASHFS
+ 
+ 	  If unsure, say N.
+ 
++config SQUASHFS_LZMA
++	bool "Include support for LZMA compressed file systems"
++	depends on SQUASHFS
++	select DECOMPRESS_LZMA
++
+ config SQUASHFS_EMBEDDED
+ 
+ 	bool "Additional option for memory-constrained systems" 
+--- a/fs/squashfs/Makefile
++++ b/fs/squashfs/Makefile
+@@ -5,5 +5,5 @@
+ obj-$(CONFIG_SQUASHFS) += squashfs.o
+ squashfs-y += block.o cache.o dir.o export.o file.o fragment.o id.o inode.o
+ squashfs-y += namei.o super.o symlink.o zlib_wrapper.o decompressor.o
+-squashfs-$(CONFIG_SQUASHFS_XATTRS) += xattr.o xattr_id.o
++squashfs-$(CONFIG_SQUASHFS_LZMA) += lzma_wrapper.o
+ 
+--- a/fs/squashfs/decompressor.c
++++ b/fs/squashfs/decompressor.c
+@@ -50,7 +50,11 @@ static const struct squashfs_decompresso
+ 
+ static const struct squashfs_decompressor *decompressor[] = {
+ 	&squashfs_zlib_comp_ops,
++#ifdef CONFIG_SQUASHFS_LZMA
++	&squashfs_lzma_comp_ops,
++#else
+ 	&squashfs_lzma_unsupported_comp_ops,
++#endif
+ 	&squashfs_lzo_unsupported_comp_ops,
+ 	&squashfs_unknown_comp_ops
+ };
+--- /dev/null
++++ b/fs/squashfs/lzma_wrapper.c
+@@ -0,0 +1,152 @@
++/*
++ * Squashfs - a compressed read only filesystem for Linux
++ *
++ * Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
++ * Phillip Lougher <phillip@lougher.demon.co.uk>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2,
++ * or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++ *
++ * lzma_wrapper.c
++ */
++
++#include <asm/unaligned.h>
++#include <linux/buffer_head.h>
++#include <linux/mutex.h>
++#include <linux/vmalloc.h>
++#include <linux/decompress/unlzma.h>
++#include <linux/slab.h>
++
++#include "squashfs_fs.h"
++#include "squashfs_fs_sb.h"
++#include "squashfs_fs_i.h"
++#include "squashfs.h"
++#include "decompressor.h"
++
++struct squashfs_lzma {
++	void	*input;
++	void	*output;
++};
++
++/* decompress_unlzma.c is currently non re-entrant... */
++DEFINE_MUTEX(lzma_mutex);
++
++/* decompress_unlzma.c doesn't provide any context in its callbacks... */
++static int lzma_error;
++
++static void error(char *m)
++{
++	ERROR("unlzma error: %s\n", m);
++	lzma_error = 1;
++}
++
++	
++static void *lzma_init(struct squashfs_sb_info *msblk)
++{
++	struct squashfs_lzma *stream = kzalloc(sizeof(*stream), GFP_KERNEL);
++	if (stream == NULL)
++		goto failed;
++	stream->input = vmalloc(msblk->block_size);
++	if (stream->input == NULL)
++		goto failed;
++	stream->output = vmalloc(msblk->block_size);
++	if (stream->output == NULL)
++		goto failed2;
++
++	return stream;
++
++failed2:
++	vfree(stream->input);
++failed:
++	ERROR("failed to allocate lzma workspace\n");
++	kfree(stream);
++	return NULL;
++}
++
++
++static void lzma_free(void *strm)
++{
++	struct squashfs_lzma *stream = strm;
++
++	if (stream) {
++		vfree(stream->input);
++		vfree(stream->output);
++	}
++	kfree(stream);
++}
++
++
++static int lzma_uncompress(struct squashfs_sb_info *msblk, void **buffer,
++	struct buffer_head **bh, int b, int offset, int length, int srclength,
++	int pages)
++{
++	struct squashfs_lzma *stream = msblk->stream;
++	void *buff = stream->input;
++	int avail, i, bytes = length, res;
++
++	mutex_lock(&lzma_mutex);
++
++	for (i = 0; i < b; i++) {
++		wait_on_buffer(bh[i]);
++		if (!buffer_uptodate(bh[i]))
++			goto block_release;
++
++		avail = min(bytes, msblk->devblksize - offset);
++		memcpy(buff, bh[i]->b_data + offset, avail);
++		buff += avail;
++		bytes -= avail;
++		offset = 0;
++		put_bh(bh[i]);
++	}
++
++	lzma_error = 0;
++	res = unlzma(stream->input, length, NULL, NULL, stream->output, NULL,
++							error);
++	if (res || lzma_error)
++		goto failed;
++
++	/* uncompressed size is stored in the LZMA header (5 byte offset) */
++	res = bytes = get_unaligned_le32(stream->input + 5);
++	for (i = 0, buff = stream->output; bytes && i < pages; i++) {
++		avail = min_t(int, bytes, PAGE_CACHE_SIZE);
++		memcpy(buffer[i], buff, avail);
++		buff += avail;
++		bytes -= avail;
++	}
++	if (bytes)
++		goto failed;
++
++	mutex_unlock(&lzma_mutex);
++	return res;
++
++block_release:
++	for (; i < b; i++)
++		put_bh(bh[i]);
++
++failed:
++	mutex_unlock(&lzma_mutex);
++
++	ERROR("lzma decompression failed, data probably corrupt\n");
++	return -EIO;
++}
++
++const struct squashfs_decompressor squashfs_lzma_comp_ops = {
++	.init = lzma_init,
++	.free = lzma_free,
++	.decompress = lzma_uncompress,
++	.id = LZMA_COMPRESSION,
++	.name = "lzma",
++	.supported = 1
++};
++
+--- a/fs/squashfs/squashfs.h
++++ b/fs/squashfs/squashfs.h
+@@ -94,3 +94,6 @@ extern const struct address_space_operat
+ 
+ /* zlib_wrapper.c */
+ extern const struct squashfs_decompressor squashfs_zlib_comp_ops;
++
++/* lzma wrapper.c */
++extern const struct squashfs_decompressor squashfs_lzma_comp_ops;
diff --git a/target/linux/generic/patches-2.6.35/007-squashfs_make_lzma_available.patch b/target/linux/generic/patches-2.6.35/007-squashfs_make_lzma_available.patch
new file mode 100644
index 0000000000..c1a105d0dc
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/007-squashfs_make_lzma_available.patch
@@ -0,0 +1,165 @@
+From fdf23ed283bc6ef5c25076ce2065f892120ff556 Mon Sep 17 00:00:00 2001
+From: Phillip Lougher <phillip@lougher.demon.co.uk>
+Date: Thu, 22 Oct 2009 04:57:38 +0100
+Subject: [PATCH] Squashfs: Make unlzma available to non initramfs/initrd code
+
+Add a config option DECOMPRESS_LZMA_NEEDED which allows subsystems to
+specify they need the unlzma code.  Normally decompress_unlzma.c is
+compiled with __init and unlzma is not exported to modules.
+
+Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
+---
+ fs/squashfs/Kconfig                   |    1 +
+ include/linux/decompress/bunzip2_mm.h |   12 ++++++++++++
+ include/linux/decompress/inflate_mm.h |   12 ++++++++++++
+ include/linux/decompress/mm.h         |    3 ---
+ include/linux/decompress/unlzma_mm.h  |   20 ++++++++++++++++++++
+ lib/Kconfig                           |    3 +++
+ lib/decompress_bunzip2.c              |    1 +
+ lib/decompress_inflate.c              |    1 +
+ lib/decompress_unlzma.c               |    5 ++++-
+ 9 files changed, 54 insertions(+), 4 deletions(-)
+ create mode 100644 include/linux/decompress/bunzip2_mm.h
+ create mode 100644 include/linux/decompress/inflate_mm.h
+ create mode 100644 include/linux/decompress/unlzma_mm.h
+
+--- a/fs/squashfs/Kconfig
++++ b/fs/squashfs/Kconfig
+@@ -30,6 +30,7 @@ config SQUASHFS_LZMA
+ 	bool "Include support for LZMA compressed file systems"
+ 	depends on SQUASHFS
+ 	select DECOMPRESS_LZMA
++	select DECOMPRESS_LZMA_NEEDED
+ 
+ config SQUASHFS_EMBEDDED
+ 
+--- /dev/null
++++ b/include/linux/decompress/bunzip2_mm.h
+@@ -0,0 +1,12 @@
++#ifndef BUNZIP2_MM_H
++#define BUNZIP2_MM_H
++
++#ifdef STATIC
++/* Code active when included from pre-boot environment: */
++#define INIT
++#else
++/* Compile for initramfs/initrd code only */
++#define INIT __init
++#endif
++
++#endif
+--- /dev/null
++++ b/include/linux/decompress/inflate_mm.h
+@@ -0,0 +1,12 @@
++#ifndef INFLATE_MM_H
++#define INFLATE_MM_H
++
++#ifdef STATIC
++/* Code active when included from pre-boot environment: */
++#define INIT
++#else
++/* Compile for initramfs/initrd code only */
++#define INIT __init
++#endif
++
++#endif
+--- a/include/linux/decompress/mm.h
++++ b/include/linux/decompress/mm.h
+@@ -63,8 +63,6 @@ static void free(void *where)
+ 
+ #define set_error_fn(x)
+ 
+-#define INIT
+-
+ #else /* STATIC */
+ 
+ /* Code active when compiled standalone for use when loading ramdisk: */
+@@ -87,7 +85,6 @@ static void free(void *where)
+ static void(*error)(char *m);
+ #define set_error_fn(x) error = x;
+ 
+-#define INIT __init
+ #define STATIC
+ 
+ #include <linux/init.h>
+--- /dev/null
++++ b/include/linux/decompress/unlzma_mm.h
+@@ -0,0 +1,20 @@
++#ifndef UNLZMA_MM_H
++#define UNLZMA_MM_H
++
++#ifdef STATIC
++
++/* Code active when included from pre-boot environment: */
++#define INIT
++
++#elif defined(CONFIG_DECOMPRESS_LZMA_NEEDED)
++
++/* Make it available to non initramfs/initrd code */
++#define INIT
++#include <linux/module.h>
++#else
++
++/* Compile for initramfs/initrd code only */
++#define INIT __init
++#endif
++
++#endif
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -121,6 +121,9 @@ config DECOMPRESS_LZO
+ 	select LZO_DECOMPRESS
+ 	tristate
+ 
++config DECOMPRESS_LZMA_NEEDED
++	 boolean
++
+ #
+ # Generic allocator support is selected if needed
+ #
+--- a/lib/decompress_bunzip2.c
++++ b/lib/decompress_bunzip2.c
+@@ -52,6 +52,7 @@
+ #include <linux/slab.h>
+ #endif /* STATIC */
+ 
++#include <linux/decompress/bunzip2_mm.h>
+ #include <linux/decompress/mm.h>
+ 
+ #ifndef INT_MAX
+--- a/lib/decompress_inflate.c
++++ b/lib/decompress_inflate.c
+@@ -23,6 +23,7 @@
+ 
+ #endif /* STATIC */
+ 
++#include <linux/decompress/inflate_mm.h>
+ #include <linux/decompress/mm.h>
+ 
+ #define GZIP_IOBUF_SIZE (16*1024)
+--- a/lib/decompress_unlzma.c
++++ b/lib/decompress_unlzma.c
+@@ -36,6 +36,7 @@
+ #include <linux/slab.h>
+ #endif /* STATIC */
+ 
++#include <linux/decompress/unlzma_mm.h>
+ #include <linux/decompress/mm.h>
+ 
+ #define	MIN(a, b) (((a) < (b)) ? (a) : (b))
+@@ -531,7 +532,7 @@ static inline void INIT process_bit1(str
+ 
+ 
+ 
+-STATIC inline int INIT unlzma(unsigned char *buf, int in_len,
++STATIC int INIT unlzma(unsigned char *buf, int in_len,
+ 			      int(*fill)(void*, unsigned int),
+ 			      int(*flush)(void*, unsigned int),
+ 			      unsigned char *output,
+@@ -664,4 +665,6 @@ STATIC int INIT decompress(unsigned char
+ {
+ 	return unlzma(buf, in_len - 4, fill, flush, output, posp, error_fn);
+ }
++#elif defined(CONFIG_DECOMPRESS_LZMA_NEEDED)
++EXPORT_SYMBOL(unlzma);
+ #endif
diff --git a/target/linux/generic/patches-2.6.35/008-jffs2_make_lzma_available.patch b/target/linux/generic/patches-2.6.35/008-jffs2_make_lzma_available.patch
new file mode 100644
index 0000000000..5ab2e72928
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/008-jffs2_make_lzma_available.patch
@@ -0,0 +1,5142 @@
+--- a/fs/jffs2/Kconfig
++++ b/fs/jffs2/Kconfig
+@@ -139,6 +139,15 @@ config JFFS2_LZO
+ 	  This feature was added in July, 2007. Say 'N' if you need
+ 	  compatibility with older bootloaders or kernels.
+ 
++config JFFS2_LZMA
++	bool "JFFS2 LZMA compression support" if JFFS2_COMPRESSION_OPTIONS
++	select LZMA_COMPRESS
++	select LZMA_DECOMPRESS
++	depends on JFFS2_FS
++	default n
++	help
++	  JFFS2 wrapper to the LZMA C SDK
++
+ config JFFS2_RTIME
+ 	bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
+ 	depends on JFFS2_FS
+--- a/fs/jffs2/Makefile
++++ b/fs/jffs2/Makefile
+@@ -18,4 +18,7 @@ jffs2-$(CONFIG_JFFS2_RUBIN)	+= compr_rub
+ jffs2-$(CONFIG_JFFS2_RTIME)	+= compr_rtime.o
+ jffs2-$(CONFIG_JFFS2_ZLIB)	+= compr_zlib.o
+ jffs2-$(CONFIG_JFFS2_LZO)	+= compr_lzo.o
++jffs2-$(CONFIG_JFFS2_LZMA)      += compr_lzma.o
+ jffs2-$(CONFIG_JFFS2_SUMMARY)   += summary.o
++
++CFLAGS_compr_lzma.o += -Iinclude/linux -Ilib/lzma
+--- a/fs/jffs2/compr.c
++++ b/fs/jffs2/compr.c
+@@ -319,6 +319,9 @@ int __init jffs2_compressors_init(void)
+ #ifdef CONFIG_JFFS2_LZO
+ 	jffs2_lzo_init();
+ #endif
++#ifdef CONFIG_JFFS2_LZMA
++        jffs2_lzma_init();
++#endif
+ /* Setting default compression mode */
+ #ifdef CONFIG_JFFS2_CMODE_NONE
+ 	jffs2_compression_mode = JFFS2_COMPR_MODE_NONE;
+@@ -342,6 +345,9 @@ int __init jffs2_compressors_init(void)
+ int jffs2_compressors_exit(void)
+ {
+ /* Unregistering compressors */
++#ifdef CONFIG_JFFS2_LZMA
++        jffs2_lzma_exit();
++#endif
+ #ifdef CONFIG_JFFS2_LZO
+ 	jffs2_lzo_exit();
+ #endif
+--- a/fs/jffs2/compr.h
++++ b/fs/jffs2/compr.h
+@@ -28,9 +28,9 @@
+ #define JFFS2_DYNRUBIN_PRIORITY  20
+ #define JFFS2_LZARI_PRIORITY     30
+ #define JFFS2_RTIME_PRIORITY     50
+-#define JFFS2_ZLIB_PRIORITY      60
+-#define JFFS2_LZO_PRIORITY       80
+-
++#define JFFS2_LZMA_PRIORITY      70
++#define JFFS2_ZLIB_PRIORITY      80
++#define JFFS2_LZO_PRIORITY       90
+ 
+ #define JFFS2_RUBINMIPS_DISABLED /* RUBINs will be used only */
+ #define JFFS2_DYNRUBIN_DISABLED  /*	   for decompression */
+@@ -98,5 +98,9 @@ void jffs2_zlib_exit(void);
+ int jffs2_lzo_init(void);
+ void jffs2_lzo_exit(void);
+ #endif
++#ifdef CONFIG_JFFS2_LZMA
++int jffs2_lzma_init(void);
++void jffs2_lzma_exit(void);
++#endif
+ 
+ #endif /* __JFFS2_COMPR_H__ */
+--- /dev/null
++++ b/fs/jffs2/compr_lzma.c
+@@ -0,0 +1,128 @@
++/*
++ * JFFS2 -- Journalling Flash File System, Version 2.
++ *
++ * For licensing information, see the file 'LICENCE' in this directory.
++ *
++ * JFFS2 wrapper to the LZMA C SDK
++ *
++ */
++
++#include <linux/lzma.h>
++#include "compr.h"
++
++#ifdef __KERNEL__
++	static DEFINE_MUTEX(deflate_mutex);
++#endif
++
++CLzmaEncHandle *p;
++Byte propsEncoded[LZMA_PROPS_SIZE];
++SizeT propsSize = sizeof(propsEncoded);
++
++STATIC void lzma_free_workspace(void)
++{
++	LzmaEnc_Destroy(p, &lzma_alloc, &lzma_alloc);
++}
++
++STATIC int INIT lzma_alloc_workspace(CLzmaEncProps *props)
++{
++	if ((p = (CLzmaEncHandle *)LzmaEnc_Create(&lzma_alloc)) == NULL)
++	{
++		PRINT_ERROR("Failed to allocate lzma deflate workspace\n");
++		return -ENOMEM;
++	}
++
++	if (LzmaEnc_SetProps(p, props) != SZ_OK)
++	{
++		lzma_free_workspace();
++		return -1;
++	}
++	
++	if (LzmaEnc_WriteProperties(p, propsEncoded, &propsSize) != SZ_OK)
++	{
++		lzma_free_workspace();
++		return -1;
++	}
++
++        return 0;
++}
++
++STATIC int jffs2_lzma_compress(unsigned char *data_in, unsigned char *cpage_out,
++			      uint32_t *sourcelen, uint32_t *dstlen, void *model)
++{
++	SizeT compress_size = (SizeT)(*dstlen);
++	int ret;
++
++	#ifdef __KERNEL__
++		mutex_lock(&deflate_mutex);
++	#endif
++
++	ret = LzmaEnc_MemEncode(p, cpage_out, &compress_size, data_in, *sourcelen,
++		0, NULL, &lzma_alloc, &lzma_alloc);
++
++	#ifdef __KERNEL__
++		mutex_unlock(&deflate_mutex);
++	#endif
++
++	if (ret != SZ_OK)
++		return -1;
++
++	*dstlen = (uint32_t)compress_size;
++
++	return 0;
++}
++
++STATIC int jffs2_lzma_decompress(unsigned char *data_in, unsigned char *cpage_out,
++				 uint32_t srclen, uint32_t destlen, void *model)
++{
++	int ret;
++	SizeT dl = (SizeT)destlen;
++	SizeT sl = (SizeT)srclen;
++	ELzmaStatus status;
++	
++	ret = LzmaDecode(cpage_out, &dl, data_in, &sl, propsEncoded,
++		propsSize, LZMA_FINISH_ANY, &status, &lzma_alloc);
++
++	if (ret != SZ_OK || status == LZMA_STATUS_NOT_FINISHED || dl != (SizeT)destlen)
++		return -1;
++
++	return 0;
++}
++
++static struct jffs2_compressor jffs2_lzma_comp = {
++	.priority = JFFS2_LZMA_PRIORITY,
++	.name = "lzma",
++	.compr = JFFS2_COMPR_LZMA,
++	.compress = &jffs2_lzma_compress,
++	.decompress = &jffs2_lzma_decompress,
++	.disabled = 0,
++};
++
++int INIT jffs2_lzma_init(void)
++{
++        int ret;
++	CLzmaEncProps props;
++	LzmaEncProps_Init(&props);
++
++        props.dictSize = LZMA_BEST_DICT(0x2000);
++        props.level = LZMA_BEST_LEVEL;
++        props.lc = LZMA_BEST_LC;
++        props.lp = LZMA_BEST_LP;
++        props.pb = LZMA_BEST_PB;
++        props.fb = LZMA_BEST_FB;
++
++	ret = lzma_alloc_workspace(&props);
++        if (ret < 0)
++                return ret;
++
++	ret = jffs2_register_compressor(&jffs2_lzma_comp);
++	if (ret)
++		lzma_free_workspace();
++	
++        return ret;
++}
++
++void jffs2_lzma_exit(void)
++{
++	jffs2_unregister_compressor(&jffs2_lzma_comp);
++	lzma_free_workspace();
++}
+--- a/fs/jffs2/super.c
++++ b/fs/jffs2/super.c
+@@ -254,14 +254,41 @@ static int __init init_jffs2_fs(void)
+ 	BUILD_BUG_ON(sizeof(struct jffs2_raw_inode) != 68);
+ 	BUILD_BUG_ON(sizeof(struct jffs2_raw_summary) != 32);
+ 
+-	printk(KERN_INFO "JFFS2 version 2.2."
++	printk(KERN_INFO "JFFS2 version 2.2"
+ #ifdef CONFIG_JFFS2_FS_WRITEBUFFER
+ 	       " (NAND)"
+ #endif
+ #ifdef CONFIG_JFFS2_SUMMARY
+-	       " (SUMMARY) "
++	       " (SUMMARY)"
+ #endif
+-	       " © 2001-2006 Red Hat, Inc.\n");
++#ifdef CONFIG_JFFS2_ZLIB
++	       " (ZLIB)"
++#endif
++#ifdef CONFIG_JFFS2_LZO
++	       " (LZO)"
++#endif
++#ifdef CONFIG_JFFS2_LZMA
++	       " (LZMA)"
++#endif
++#ifdef CONFIG_JFFS2_RTIME
++	       " (RTIME)"
++#endif
++#ifdef CONFIG_JFFS2_RUBIN
++	       " (RUBIN)"
++#endif
++#ifdef  CONFIG_JFFS2_CMODE_NONE
++	       " (CMODE_NONE)"
++#endif
++#ifdef CONFIG_JFFS2_CMODE_PRIORITY
++	       " (CMODE_PRIORITY)"
++#endif
++#ifdef CONFIG_JFFS2_CMODE_SIZE
++	       " (CMODE_SIZE)"
++#endif
++#ifdef CONFIG_JFFS2_CMODE_FAVOURLZO
++	       " (CMODE_FAVOURLZO)"
++#endif
++	       " (c) 2001-2006 Red Hat, Inc.\n");
+ 
+ 	jffs2_inode_cachep = kmem_cache_create("jffs2_i",
+ 					     sizeof(struct jffs2_inode_info),
+--- a/include/linux/jffs2.h
++++ b/include/linux/jffs2.h
+@@ -45,6 +45,7 @@
+ #define JFFS2_COMPR_DYNRUBIN	0x05
+ #define JFFS2_COMPR_ZLIB	0x06
+ #define JFFS2_COMPR_LZO		0x07
++#define JFFS2_COMPR_LZMA	0x08
+ /* Compatibility flags. */
+ #define JFFS2_COMPAT_MASK 0xc000      /* What do to if an unknown nodetype is found */
+ #define JFFS2_NODE_ACCURATE 0x2000
+--- /dev/null
++++ b/include/linux/lzma.h
+@@ -0,0 +1,62 @@
++#ifndef __LZMA_H__
++#define __LZMA_H__
++
++#ifdef __KERNEL__
++	#include <linux/kernel.h>
++	#include <linux/sched.h>
++	#include <linux/slab.h>
++	#include <linux/vmalloc.h>
++	#include <linux/init.h>
++	#define LZMA_MALLOC vmalloc
++	#define LZMA_FREE vfree
++	#define PRINT_ERROR(msg) printk(KERN_WARNING #msg)
++	#define INIT __init
++	#define STATIC static
++#else
++	#include <stdint.h>
++	#include <stdlib.h>
++	#include <stdio.h>
++	#include <unistd.h>
++	#include <string.h>
++	#include <asm/types.h>
++	#include <errno.h>
++	#include <linux/jffs2.h>
++	#ifndef PAGE_SIZE
++		extern int page_size;
++		#define PAGE_SIZE page_size
++	#endif
++	#define LZMA_MALLOC malloc
++	#define LZMA_FREE free
++	#define PRINT_ERROR(msg) fprintf(stderr, msg)
++	#define INIT
++	#define STATIC
++#endif
++
++#include "lzma/LzmaDec.h"
++#include "lzma/LzmaEnc.h"
++
++#define LZMA_BEST_LEVEL (9)
++#define LZMA_BEST_LC    (0)
++#define LZMA_BEST_LP    (0)
++#define LZMA_BEST_PB    (0)
++#define LZMA_BEST_FB  (273)
++
++#define LZMA_BEST_DICT(n) (((int)((n) / 2)) * 2)
++
++static void *p_lzma_malloc(void *p, size_t size)
++{
++        if (size == 0)
++                return NULL;
++
++        return LZMA_MALLOC(size);
++}
++
++static void p_lzma_free(void *p, void *address)
++{
++        if (address != NULL)
++                LZMA_FREE(address);
++}
++
++static ISzAlloc lzma_alloc = {p_lzma_malloc, p_lzma_free};
++
++#endif
+--- /dev/null
++++ b/include/linux/lzma/LzFind.h
+@@ -0,0 +1,115 @@
++/* LzFind.h -- Match finder for LZ algorithms
++2009-04-22 : Igor Pavlov : Public domain */
++
++#ifndef __LZ_FIND_H
++#define __LZ_FIND_H
++
++#include "Types.h"
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++typedef UInt32 CLzRef;
++
++typedef struct _CMatchFinder
++{
++  Byte *buffer;
++  UInt32 pos;
++  UInt32 posLimit;
++  UInt32 streamPos;
++  UInt32 lenLimit;
++
++  UInt32 cyclicBufferPos;
++  UInt32 cyclicBufferSize; /* it must be = (historySize + 1) */
++
++  UInt32 matchMaxLen;
++  CLzRef *hash;
++  CLzRef *son;
++  UInt32 hashMask;
++  UInt32 cutValue;
++
++  Byte *bufferBase;
++  ISeqInStream *stream;
++  int streamEndWasReached;
++
++  UInt32 blockSize;
++  UInt32 keepSizeBefore;
++  UInt32 keepSizeAfter;
++
++  UInt32 numHashBytes;
++  int directInput;
++  size_t directInputRem;
++  int btMode;
++  int bigHash;
++  UInt32 historySize;
++  UInt32 fixedHashSize;
++  UInt32 hashSizeSum;
++  UInt32 numSons;
++  SRes result;
++  UInt32 crc[256];
++} CMatchFinder;
++
++#define Inline_MatchFinder_GetPointerToCurrentPos(p) ((p)->buffer)
++#define Inline_MatchFinder_GetIndexByte(p, index) ((p)->buffer[(Int32)(index)])
++
++#define Inline_MatchFinder_GetNumAvailableBytes(p) ((p)->streamPos - (p)->pos)
++
++int MatchFinder_NeedMove(CMatchFinder *p);
++Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p);
++void MatchFinder_MoveBlock(CMatchFinder *p);
++void MatchFinder_ReadIfRequired(CMatchFinder *p);
++
++void MatchFinder_Construct(CMatchFinder *p);
++
++/* Conditions:
++     historySize <= 3 GB
++     keepAddBufferBefore + matchMaxLen + keepAddBufferAfter < 511MB
++*/
++int MatchFinder_Create(CMatchFinder *p, UInt32 historySize,
++    UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
++    ISzAlloc *alloc);
++void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc);
++void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems);
++void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue);
++
++UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *buffer, CLzRef *son,
++    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 _cutValue,
++    UInt32 *distances, UInt32 maxLen);
++
++/*
++Conditions:
++  Mf_GetNumAvailableBytes_Func must be called before each Mf_GetMatchLen_Func.
++  Mf_GetPointerToCurrentPos_Func's result must be used only before any other function
++*/
++
++typedef void (*Mf_Init_Func)(void *object);
++typedef Byte (*Mf_GetIndexByte_Func)(void *object, Int32 index);
++typedef UInt32 (*Mf_GetNumAvailableBytes_Func)(void *object);
++typedef const Byte * (*Mf_GetPointerToCurrentPos_Func)(void *object);
++typedef UInt32 (*Mf_GetMatches_Func)(void *object, UInt32 *distances);
++typedef void (*Mf_Skip_Func)(void *object, UInt32);
++
++typedef struct _IMatchFinder
++{
++  Mf_Init_Func Init;
++  Mf_GetIndexByte_Func GetIndexByte;
++  Mf_GetNumAvailableBytes_Func GetNumAvailableBytes;
++  Mf_GetPointerToCurrentPos_Func GetPointerToCurrentPos;
++  Mf_GetMatches_Func GetMatches;
++  Mf_Skip_Func Skip;
++} IMatchFinder;
++
++void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable);
++
++void MatchFinder_Init(CMatchFinder *p);
++UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
++UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
++void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
++void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif
+--- /dev/null
++++ b/include/linux/lzma/LzHash.h
+@@ -0,0 +1,54 @@
++/* LzHash.h -- HASH functions for LZ algorithms
++2009-02-07 : Igor Pavlov : Public domain */
++
++#ifndef __LZ_HASH_H
++#define __LZ_HASH_H
++
++#define kHash2Size (1 << 10)
++#define kHash3Size (1 << 16)
++#define kHash4Size (1 << 20)
++
++#define kFix3HashSize (kHash2Size)
++#define kFix4HashSize (kHash2Size + kHash3Size)
++#define kFix5HashSize (kHash2Size + kHash3Size + kHash4Size)
++
++#define HASH2_CALC hashValue = cur[0] | ((UInt32)cur[1] << 8);
++
++#define HASH3_CALC { \
++  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
++  hash2Value = temp & (kHash2Size - 1); \
++  hashValue = (temp ^ ((UInt32)cur[2] << 8)) & p->hashMask; }
++
++#define HASH4_CALC { \
++  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
++  hash2Value = temp & (kHash2Size - 1); \
++  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
++  hashValue = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & p->hashMask; }
++
++#define HASH5_CALC { \
++  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
++  hash2Value = temp & (kHash2Size - 1); \
++  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
++  hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)); \
++  hashValue = (hash4Value ^ (p->crc[cur[4]] << 3)) & p->hashMask; \
++  hash4Value &= (kHash4Size - 1); }
++
++/* #define HASH_ZIP_CALC hashValue = ((cur[0] | ((UInt32)cur[1] << 8)) ^ p->crc[cur[2]]) & 0xFFFF; */
++#define HASH_ZIP_CALC hashValue = ((cur[2] | ((UInt32)cur[0] << 8)) ^ p->crc[cur[1]]) & 0xFFFF;
++
++
++#define MT_HASH2_CALC \
++  hash2Value = (p->crc[cur[0]] ^ cur[1]) & (kHash2Size - 1);
++
++#define MT_HASH3_CALC { \
++  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
++  hash2Value = temp & (kHash2Size - 1); \
++  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); }
++
++#define MT_HASH4_CALC { \
++  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
++  hash2Value = temp & (kHash2Size - 1); \
++  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
++  hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & (kHash4Size - 1); }
++
++#endif
+--- /dev/null
++++ b/include/linux/lzma/LzmaDec.h
+@@ -0,0 +1,231 @@
++/* LzmaDec.h -- LZMA Decoder
++2009-02-07 : Igor Pavlov : Public domain */
++
++#ifndef __LZMA_DEC_H
++#define __LZMA_DEC_H
++
++#include "Types.h"
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/* #define _LZMA_PROB32 */
++/* _LZMA_PROB32 can increase the speed on some CPUs,
++   but memory usage for CLzmaDec::probs will be doubled in that case */
++
++#ifdef _LZMA_PROB32
++#define CLzmaProb UInt32
++#else
++#define CLzmaProb UInt16
++#endif
++
++
++/* ---------- LZMA Properties ---------- */
++
++#define LZMA_PROPS_SIZE 5
++
++typedef struct _CLzmaProps
++{
++  unsigned lc, lp, pb;
++  UInt32 dicSize;
++} CLzmaProps;
++
++/* LzmaProps_Decode - decodes properties
++Returns:
++  SZ_OK
++  SZ_ERROR_UNSUPPORTED - Unsupported properties
++*/
++
++SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size);
++
++
++/* ---------- LZMA Decoder state ---------- */
++
++/* LZMA_REQUIRED_INPUT_MAX = number of required input bytes for worst case.
++   Num bits = log2((2^11 / 31) ^ 22) + 26 < 134 + 26 = 160; */
++
++#define LZMA_REQUIRED_INPUT_MAX 20
++
++typedef struct
++{
++  CLzmaProps prop;
++  CLzmaProb *probs;
++  Byte *dic;
++  const Byte *buf;
++  UInt32 range, code;
++  SizeT dicPos;
++  SizeT dicBufSize;
++  UInt32 processedPos;
++  UInt32 checkDicSize;
++  unsigned state;
++  UInt32 reps[4];
++  unsigned remainLen;
++  int needFlush;
++  int needInitState;
++  UInt32 numProbs;
++  unsigned tempBufSize;
++  Byte tempBuf[LZMA_REQUIRED_INPUT_MAX];
++} CLzmaDec;
++
++#define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; }
++
++void LzmaDec_Init(CLzmaDec *p);
++
++/* There are two types of LZMA streams:
++     0) Stream with end mark. That end mark adds about 6 bytes to compressed size.
++     1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */
++
++typedef enum
++{
++  LZMA_FINISH_ANY,   /* finish at any point */
++  LZMA_FINISH_END    /* block must be finished at the end */
++} ELzmaFinishMode;
++
++/* ELzmaFinishMode has meaning only if the decoding reaches output limit !!!
++
++   You must use LZMA_FINISH_END, when you know that current output buffer
++   covers last bytes of block. In other cases you must use LZMA_FINISH_ANY.
++
++   If LZMA decoder sees end marker before reaching output limit, it returns SZ_OK,
++   and output value of destLen will be less than output buffer size limit.
++   You can check status result also.
++
++   You can use multiple checks to test data integrity after full decompression:
++     1) Check Result and "status" variable.
++     2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize.
++     3) Check that output(srcLen) = compressedSize, if you know real compressedSize.
++        You must use correct finish mode in that case. */
++
++typedef enum
++{
++  LZMA_STATUS_NOT_SPECIFIED,               /* use main error code instead */
++  LZMA_STATUS_FINISHED_WITH_MARK,          /* stream was finished with end mark. */
++  LZMA_STATUS_NOT_FINISHED,                /* stream was not finished */
++  LZMA_STATUS_NEEDS_MORE_INPUT,            /* you must provide more input bytes */
++  LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK  /* there is probability that stream was finished without end mark */
++} ELzmaStatus;
++
++/* ELzmaStatus is used only as output value for function call */
++
++
++/* ---------- Interfaces ---------- */
++
++/* There are 3 levels of interfaces:
++     1) Dictionary Interface
++     2) Buffer Interface
++     3) One Call Interface
++   You can select any of these interfaces, but don't mix functions from different
++   groups for same object. */
++
++
++/* There are two variants to allocate state for Dictionary Interface:
++     1) LzmaDec_Allocate / LzmaDec_Free
++     2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs
++   You can use variant 2, if you set dictionary buffer manually.
++   For Buffer Interface you must always use variant 1.
++
++LzmaDec_Allocate* can return:
++  SZ_OK
++  SZ_ERROR_MEM         - Memory allocation error
++  SZ_ERROR_UNSUPPORTED - Unsupported properties
++*/
++   
++SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc);
++void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc);
++
++SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc);
++void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc);
++
++/* ---------- Dictionary Interface ---------- */
++
++/* You can use it, if you want to eliminate the overhead for data copying from
++   dictionary to some other external buffer.
++   You must work with CLzmaDec variables directly in this interface.
++
++   STEPS:
++     LzmaDec_Constr()
++     LzmaDec_Allocate()
++     for (each new stream)
++     {
++       LzmaDec_Init()
++       while (it needs more decompression)
++       {
++         LzmaDec_DecodeToDic()
++         use data from CLzmaDec::dic and update CLzmaDec::dicPos
++       }
++     }
++     LzmaDec_Free()
++*/
++
++/* LzmaDec_DecodeToDic
++   
++   The decoding to internal dictionary buffer (CLzmaDec::dic).
++   You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!!
++
++finishMode:
++  It has meaning only if the decoding reaches output limit (dicLimit).
++  LZMA_FINISH_ANY - Decode just dicLimit bytes.
++  LZMA_FINISH_END - Stream must be finished after dicLimit.
++
++Returns:
++  SZ_OK
++    status:
++      LZMA_STATUS_FINISHED_WITH_MARK
++      LZMA_STATUS_NOT_FINISHED
++      LZMA_STATUS_NEEDS_MORE_INPUT
++      LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
++  SZ_ERROR_DATA - Data error
++*/
++
++SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit,
++    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
++
++
++/* ---------- Buffer Interface ---------- */
++
++/* It's zlib-like interface.
++   See LzmaDec_DecodeToDic description for information about STEPS and return results,
++   but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need
++   to work with CLzmaDec variables manually.
++
++finishMode:
++  It has meaning only if the decoding reaches output limit (*destLen).
++  LZMA_FINISH_ANY - Decode just destLen bytes.
++  LZMA_FINISH_END - Stream must be finished after (*destLen).
++*/
++
++SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen,
++    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
++
++
++/* ---------- One Call Interface ---------- */
++
++/* LzmaDecode
++
++finishMode:
++  It has meaning only if the decoding reaches output limit (*destLen).
++  LZMA_FINISH_ANY - Decode just destLen bytes.
++  LZMA_FINISH_END - Stream must be finished after (*destLen).
++
++Returns:
++  SZ_OK
++    status:
++      LZMA_STATUS_FINISHED_WITH_MARK
++      LZMA_STATUS_NOT_FINISHED
++      LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
++  SZ_ERROR_DATA - Data error
++  SZ_ERROR_MEM  - Memory allocation error
++  SZ_ERROR_UNSUPPORTED - Unsupported properties
++  SZ_ERROR_INPUT_EOF - It needs more bytes in input buffer (src).
++*/
++
++SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
++    const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
++    ELzmaStatus *status, ISzAlloc *alloc);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif
+--- /dev/null
++++ b/include/linux/lzma/LzmaEnc.h
+@@ -0,0 +1,80 @@
++/*  LzmaEnc.h -- LZMA Encoder
++2009-02-07 : Igor Pavlov : Public domain */
++
++#ifndef __LZMA_ENC_H
++#define __LZMA_ENC_H
++
++#include "Types.h"
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#define LZMA_PROPS_SIZE 5
++
++typedef struct _CLzmaEncProps
++{
++  int level;       /*  0 <= level <= 9 */
++  UInt32 dictSize; /* (1 << 12) <= dictSize <= (1 << 27) for 32-bit version
++                      (1 << 12) <= dictSize <= (1 << 30) for 64-bit version
++                       default = (1 << 24) */
++  int lc;          /* 0 <= lc <= 8, default = 3 */
++  int lp;          /* 0 <= lp <= 4, default = 0 */
++  int pb;          /* 0 <= pb <= 4, default = 2 */
++  int algo;        /* 0 - fast, 1 - normal, default = 1 */
++  int fb;          /* 5 <= fb <= 273, default = 32 */
++  int btMode;      /* 0 - hashChain Mode, 1 - binTree mode - normal, default = 1 */
++  int numHashBytes; /* 2, 3 or 4, default = 4 */
++  UInt32 mc;        /* 1 <= mc <= (1 << 30), default = 32 */
++  unsigned writeEndMark;  /* 0 - do not write EOPM, 1 - write EOPM, default = 0 */
++  int numThreads;  /* 1 or 2, default = 2 */
++} CLzmaEncProps;
++
++void LzmaEncProps_Init(CLzmaEncProps *p);
++void LzmaEncProps_Normalize(CLzmaEncProps *p);
++UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2);
++
++
++/* ---------- CLzmaEncHandle Interface ---------- */
++
++/* LzmaEnc_* functions can return the following exit codes:
++Returns:
++  SZ_OK           - OK
++  SZ_ERROR_MEM    - Memory allocation error
++  SZ_ERROR_PARAM  - Incorrect paramater in props
++  SZ_ERROR_WRITE  - Write callback error.
++  SZ_ERROR_PROGRESS - some break from progress callback
++  SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version)
++*/
++
++typedef void * CLzmaEncHandle;
++
++CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc);
++void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig);
++SRes LzmaEnc_SetProps(CLzmaEncHandle p, const CLzmaEncProps *props);
++SRes LzmaEnc_WriteProperties(CLzmaEncHandle p, Byte *properties, SizeT *size);
++SRes LzmaEnc_Encode(CLzmaEncHandle p, ISeqOutStream *outStream, ISeqInStream *inStream,
++    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
++SRes LzmaEnc_MemEncode(CLzmaEncHandle p, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
++    int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
++
++/* ---------- One Call Interface ---------- */
++
++/* LzmaEncode
++Return code:
++  SZ_OK               - OK
++  SZ_ERROR_MEM        - Memory allocation error
++  SZ_ERROR_PARAM      - Incorrect paramater
++  SZ_ERROR_OUTPUT_EOF - output buffer overflow
++  SZ_ERROR_THREAD     - errors in multithreading functions (only for Mt version)
++*/
++
++SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
++    const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
++    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif
+--- /dev/null
++++ b/include/linux/lzma/Types.h
+@@ -0,0 +1,226 @@
++/* Types.h -- Basic types
++2009-11-23 : Igor Pavlov : Public domain */
++
++#ifndef __7Z_TYPES_H
++#define __7Z_TYPES_H
++
++#include <stddef.h>
++
++#ifdef _WIN32
++#include <windows.h>
++#endif
++
++#ifndef EXTERN_C_BEGIN
++#ifdef __cplusplus
++#define EXTERN_C_BEGIN extern "C" {
++#define EXTERN_C_END }
++#else
++#define EXTERN_C_BEGIN
++#define EXTERN_C_END
++#endif
++#endif
++
++EXTERN_C_BEGIN
++
++#define SZ_OK 0
++
++#define SZ_ERROR_DATA 1
++#define SZ_ERROR_MEM 2
++#define SZ_ERROR_CRC 3
++#define SZ_ERROR_UNSUPPORTED 4
++#define SZ_ERROR_PARAM 5
++#define SZ_ERROR_INPUT_EOF 6
++#define SZ_ERROR_OUTPUT_EOF 7
++#define SZ_ERROR_READ 8
++#define SZ_ERROR_WRITE 9
++#define SZ_ERROR_PROGRESS 10
++#define SZ_ERROR_FAIL 11
++#define SZ_ERROR_THREAD 12
++
++#define SZ_ERROR_ARCHIVE 16
++#define SZ_ERROR_NO_ARCHIVE 17
++
++typedef int SRes;
++
++#ifdef _WIN32
++typedef DWORD WRes;
++#else
++typedef int WRes;
++#endif
++
++#ifndef RINOK
++#define RINOK(x) { int __result__ = (x); if (__result__ != 0) return __result__; }
++#endif
++
++typedef unsigned char Byte;
++typedef short Int16;
++typedef unsigned short UInt16;
++
++#ifdef _LZMA_UINT32_IS_ULONG
++typedef long Int32;
++typedef unsigned long UInt32;
++#else
++typedef int Int32;
++typedef unsigned int UInt32;
++#endif
++
++#ifdef _SZ_NO_INT_64
++
++/* define _SZ_NO_INT_64, if your compiler doesn't support 64-bit integers.
++   NOTES: Some code will work incorrectly in that case! */
++
++typedef long Int64;
++typedef unsigned long UInt64;
++
++#else
++
++#if defined(_MSC_VER) || defined(__BORLANDC__)
++typedef __int64 Int64;
++typedef unsigned __int64 UInt64;
++#else
++typedef long long int Int64;
++typedef unsigned long long int UInt64;
++#endif
++
++#endif
++
++#ifdef _LZMA_NO_SYSTEM_SIZE_T
++typedef UInt32 SizeT;
++#else
++typedef size_t SizeT;
++#endif
++
++typedef int Bool;
++#define True 1
++#define False 0
++
++
++#ifdef _WIN32
++#define MY_STD_CALL __stdcall
++#else
++#define MY_STD_CALL
++#endif
++
++#ifdef _MSC_VER
++
++#if _MSC_VER >= 1300
++#define MY_NO_INLINE __declspec(noinline)
++#else
++#define MY_NO_INLINE
++#endif
++
++#define MY_CDECL __cdecl
++#define MY_FAST_CALL __fastcall
++
++#else
++
++#define MY_CDECL
++#define MY_FAST_CALL
++
++#endif
++
++
++/* The following interfaces use first parameter as pointer to structure */
++
++typedef struct
++{
++  SRes (*Read)(void *p, void *buf, size_t *size);
++    /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
++       (output(*size) < input(*size)) is allowed */
++} ISeqInStream;
++
++/* it can return SZ_ERROR_INPUT_EOF */
++SRes SeqInStream_Read(ISeqInStream *stream, void *buf, size_t size);
++SRes SeqInStream_Read2(ISeqInStream *stream, void *buf, size_t size, SRes errorType);
++SRes SeqInStream_ReadByte(ISeqInStream *stream, Byte *buf);
++
++typedef struct
++{
++  size_t (*Write)(void *p, const void *buf, size_t size);
++    /* Returns: result - the number of actually written bytes.
++       (result < size) means error */
++} ISeqOutStream;
++
++typedef enum
++{
++  SZ_SEEK_SET = 0,
++  SZ_SEEK_CUR = 1,
++  SZ_SEEK_END = 2
++} ESzSeek;
++
++typedef struct
++{
++  SRes (*Read)(void *p, void *buf, size_t *size);  /* same as ISeqInStream::Read */
++  SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
++} ISeekInStream;
++
++typedef struct
++{
++  SRes (*Look)(void *p, void **buf, size_t *size);
++    /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
++       (output(*size) > input(*size)) is not allowed
++       (output(*size) < input(*size)) is allowed */
++  SRes (*Skip)(void *p, size_t offset);
++    /* offset must be <= output(*size) of Look */
++
++  SRes (*Read)(void *p, void *buf, size_t *size);
++    /* reads directly (without buffer). It's same as ISeqInStream::Read */
++  SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
++} ILookInStream;
++
++SRes LookInStream_LookRead(ILookInStream *stream, void *buf, size_t *size);
++SRes LookInStream_SeekTo(ILookInStream *stream, UInt64 offset);
++
++/* reads via ILookInStream::Read */
++SRes LookInStream_Read2(ILookInStream *stream, void *buf, size_t size, SRes errorType);
++SRes LookInStream_Read(ILookInStream *stream, void *buf, size_t size);
++
++#define LookToRead_BUF_SIZE (1 << 14)
++
++typedef struct
++{
++  ILookInStream s;
++  ISeekInStream *realStream;
++  size_t pos;
++  size_t size;
++  Byte buf[LookToRead_BUF_SIZE];
++} CLookToRead;
++
++void LookToRead_CreateVTable(CLookToRead *p, int lookahead);
++void LookToRead_Init(CLookToRead *p);
++
++typedef struct
++{
++  ISeqInStream s;
++  ILookInStream *realStream;
++} CSecToLook;
++
++void SecToLook_CreateVTable(CSecToLook *p);
++
++typedef struct
++{
++  ISeqInStream s;
++  ILookInStream *realStream;
++} CSecToRead;
++
++void SecToRead_CreateVTable(CSecToRead *p);
++
++typedef struct
++{
++  SRes (*Progress)(void *p, UInt64 inSize, UInt64 outSize);
++    /* Returns: result. (result != SZ_OK) means break.
++       Value (UInt64)(Int64)-1 for size means unknown value. */
++} ICompressProgress;
++
++typedef struct
++{
++  void *(*Alloc)(void *p, size_t size);
++  void (*Free)(void *p, void *address); /* address can be 0 */
++} ISzAlloc;
++
++#define IAlloc_Alloc(p, size) (p)->Alloc((p), size)
++#define IAlloc_Free(p, a) (p)->Free((p), a)
++
++EXTERN_C_END
++
++#endif
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -103,6 +103,12 @@ config LZO_COMPRESS
+ config LZO_DECOMPRESS
+ 	tristate
+ 
++config LZMA_COMPRESS
++    tristate
++
++config LZMA_DECOMPRESS
++    tristate
++
+ #
+ # These all provide a common interface (hence the apparent duplication with
+ # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.)
+--- a/lib/Makefile
++++ b/lib/Makefile
+@@ -2,6 +2,16 @@
+ # Makefile for some libs needed in the kernel.
+ #
+ 
++ifdef CONFIG_JFFS2_ZLIB
++	CONFIG_ZLIB_INFLATE:=y
++	CONFIG_ZLIB_DEFLATE:=y
++endif
++
++ifdef CONFIG_JFFS2_LZMA
++	CONFIG_LZMA_DECOMPRESS:=y
++	CONFIG_LZMA_COMPRESS:=y
++endif
++
+ ifdef CONFIG_FUNCTION_TRACER
+ ORIG_CFLAGS := $(KBUILD_CFLAGS)
+ KBUILD_CFLAGS = $(subst -pg,,$(ORIG_CFLAGS))
+@@ -66,6 +76,8 @@ obj-$(CONFIG_ZLIB_DEFLATE) += zlib_defla
+ obj-$(CONFIG_REED_SOLOMON) += reed_solomon/
+ obj-$(CONFIG_LZO_COMPRESS) += lzo/
+ obj-$(CONFIG_LZO_DECOMPRESS) += lzo/
++obj-$(CONFIG_LZMA_COMPRESS) += lzma/
++obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/
+ 
+ lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
+ lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
+--- /dev/null
++++ b/lib/lzma/LzFind.c
+@@ -0,0 +1,761 @@
++/* LzFind.c -- Match finder for LZ algorithms
++2009-04-22 : Igor Pavlov : Public domain */
++
++#include <string.h>
++
++#include "LzFind.h"
++#include "LzHash.h"
++
++#define kEmptyHashValue 0
++#define kMaxValForNormalize ((UInt32)0xFFFFFFFF)
++#define kNormalizeStepMin (1 << 10) /* it must be power of 2 */
++#define kNormalizeMask (~(kNormalizeStepMin - 1))
++#define kMaxHistorySize ((UInt32)3 << 30)
++
++#define kStartMaxLen 3
++
++static void LzInWindow_Free(CMatchFinder *p, ISzAlloc *alloc)
++{
++  if (!p->directInput)
++  {
++    alloc->Free(alloc, p->bufferBase);
++    p->bufferBase = 0;
++  }
++}
++
++/* keepSizeBefore + keepSizeAfter + keepSizeReserv must be < 4G) */
++
++static int LzInWindow_Create(CMatchFinder *p, UInt32 keepSizeReserv, ISzAlloc *alloc)
++{
++  UInt32 blockSize = p->keepSizeBefore + p->keepSizeAfter + keepSizeReserv;
++  if (p->directInput)
++  {
++    p->blockSize = blockSize;
++    return 1;
++  }
++  if (p->bufferBase == 0 || p->blockSize != blockSize)
++  {
++    LzInWindow_Free(p, alloc);
++    p->blockSize = blockSize;
++    p->bufferBase = (Byte *)alloc->Alloc(alloc, (size_t)blockSize);
++  }
++  return (p->bufferBase != 0);
++}
++
++Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
++Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
++
++UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
++
++void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
++{
++  p->posLimit -= subValue;
++  p->pos -= subValue;
++  p->streamPos -= subValue;
++}
++
++static void MatchFinder_ReadBlock(CMatchFinder *p)
++{
++  if (p->streamEndWasReached || p->result != SZ_OK)
++    return;
++  if (p->directInput)
++  {
++    UInt32 curSize = 0xFFFFFFFF - p->streamPos;
++    if (curSize > p->directInputRem)
++      curSize = (UInt32)p->directInputRem;
++    p->directInputRem -= curSize;
++    p->streamPos += curSize;
++    if (p->directInputRem == 0)
++      p->streamEndWasReached = 1;
++    return;
++  }
++  for (;;)
++  {
++    Byte *dest = p->buffer + (p->streamPos - p->pos);
++    size_t size = (p->bufferBase + p->blockSize - dest);
++    if (size == 0)
++      return;
++    p->result = p->stream->Read(p->stream, dest, &size);
++    if (p->result != SZ_OK)
++      return;
++    if (size == 0)
++    {
++      p->streamEndWasReached = 1;
++      return;
++    }
++    p->streamPos += (UInt32)size;
++    if (p->streamPos - p->pos > p->keepSizeAfter)
++      return;
++  }
++}
++
++void MatchFinder_MoveBlock(CMatchFinder *p)
++{
++  memmove(p->bufferBase,
++    p->buffer - p->keepSizeBefore,
++    (size_t)(p->streamPos - p->pos + p->keepSizeBefore));
++  p->buffer = p->bufferBase + p->keepSizeBefore;
++}
++
++int MatchFinder_NeedMove(CMatchFinder *p)
++{
++  if (p->directInput)
++    return 0;
++  /* if (p->streamEndWasReached) return 0; */
++  return ((size_t)(p->bufferBase + p->blockSize - p->buffer) <= p->keepSizeAfter);
++}
++
++void MatchFinder_ReadIfRequired(CMatchFinder *p)
++{
++  if (p->streamEndWasReached)
++    return;
++  if (p->keepSizeAfter >= p->streamPos - p->pos)
++    MatchFinder_ReadBlock(p);
++}
++
++static void MatchFinder_CheckAndMoveAndRead(CMatchFinder *p)
++{
++  if (MatchFinder_NeedMove(p))
++    MatchFinder_MoveBlock(p);
++  MatchFinder_ReadBlock(p);
++}
++
++static void MatchFinder_SetDefaultSettings(CMatchFinder *p)
++{
++  p->cutValue = 32;
++  p->btMode = 1;
++  p->numHashBytes = 4;
++  p->bigHash = 0;
++}
++
++#define kCrcPoly 0xEDB88320
++
++void MatchFinder_Construct(CMatchFinder *p)
++{
++  UInt32 i;
++  p->bufferBase = 0;
++  p->directInput = 0;
++  p->hash = 0;
++  MatchFinder_SetDefaultSettings(p);
++
++  for (i = 0; i < 256; i++)
++  {
++    UInt32 r = i;
++    int j;
++    for (j = 0; j < 8; j++)
++      r = (r >> 1) ^ (kCrcPoly & ~((r & 1) - 1));
++    p->crc[i] = r;
++  }
++}
++
++static void MatchFinder_FreeThisClassMemory(CMatchFinder *p, ISzAlloc *alloc)
++{
++  alloc->Free(alloc, p->hash);
++  p->hash = 0;
++}
++
++void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc)
++{
++  MatchFinder_FreeThisClassMemory(p, alloc);
++  LzInWindow_Free(p, alloc);
++}
++
++static CLzRef* AllocRefs(UInt32 num, ISzAlloc *alloc)
++{
++  size_t sizeInBytes = (size_t)num * sizeof(CLzRef);
++  if (sizeInBytes / sizeof(CLzRef) != num)
++    return 0;
++  return (CLzRef *)alloc->Alloc(alloc, sizeInBytes);
++}
++
++int MatchFinder_Create(CMatchFinder *p, UInt32 historySize,
++    UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
++    ISzAlloc *alloc)
++{
++  UInt32 sizeReserv;
++  if (historySize > kMaxHistorySize)
++  {
++    MatchFinder_Free(p, alloc);
++    return 0;
++  }
++  sizeReserv = historySize >> 1;
++  if (historySize > ((UInt32)2 << 30))
++    sizeReserv = historySize >> 2;
++  sizeReserv += (keepAddBufferBefore + matchMaxLen + keepAddBufferAfter) / 2 + (1 << 19);
++
++  p->keepSizeBefore = historySize + keepAddBufferBefore + 1;
++  p->keepSizeAfter = matchMaxLen + keepAddBufferAfter;
++  /* we need one additional byte, since we use MoveBlock after pos++ and before dictionary using */
++  if (LzInWindow_Create(p, sizeReserv, alloc))
++  {
++    UInt32 newCyclicBufferSize = historySize + 1;
++    UInt32 hs;
++    p->matchMaxLen = matchMaxLen;
++    {
++      p->fixedHashSize = 0;
++      if (p->numHashBytes == 2)
++        hs = (1 << 16) - 1;
++      else
++      {
++        hs = historySize - 1;
++        hs |= (hs >> 1);
++        hs |= (hs >> 2);
++        hs |= (hs >> 4);
++        hs |= (hs >> 8);
++        hs >>= 1;
++        hs |= 0xFFFF; /* don't change it! It's required for Deflate */
++        if (hs > (1 << 24))
++        {
++          if (p->numHashBytes == 3)
++            hs = (1 << 24) - 1;
++          else
++            hs >>= 1;
++        }
++      }
++      p->hashMask = hs;
++      hs++;
++      if (p->numHashBytes > 2) p->fixedHashSize += kHash2Size;
++      if (p->numHashBytes > 3) p->fixedHashSize += kHash3Size;
++      if (p->numHashBytes > 4) p->fixedHashSize += kHash4Size;
++      hs += p->fixedHashSize;
++    }
++
++    {
++      UInt32 prevSize = p->hashSizeSum + p->numSons;
++      UInt32 newSize;
++      p->historySize = historySize;
++      p->hashSizeSum = hs;
++      p->cyclicBufferSize = newCyclicBufferSize;
++      p->numSons = (p->btMode ? newCyclicBufferSize * 2 : newCyclicBufferSize);
++      newSize = p->hashSizeSum + p->numSons;
++      if (p->hash != 0 && prevSize == newSize)
++        return 1;
++      MatchFinder_FreeThisClassMemory(p, alloc);
++      p->hash = AllocRefs(newSize, alloc);
++      if (p->hash != 0)
++      {
++        p->son = p->hash + p->hashSizeSum;
++        return 1;
++      }
++    }
++  }
++  MatchFinder_Free(p, alloc);
++  return 0;
++}
++
++static void MatchFinder_SetLimits(CMatchFinder *p)
++{
++  UInt32 limit = kMaxValForNormalize - p->pos;
++  UInt32 limit2 = p->cyclicBufferSize - p->cyclicBufferPos;
++  if (limit2 < limit)
++    limit = limit2;
++  limit2 = p->streamPos - p->pos;
++  if (limit2 <= p->keepSizeAfter)
++  {
++    if (limit2 > 0)
++      limit2 = 1;
++  }
++  else
++    limit2 -= p->keepSizeAfter;
++  if (limit2 < limit)
++    limit = limit2;
++  {
++    UInt32 lenLimit = p->streamPos - p->pos;
++    if (lenLimit > p->matchMaxLen)
++      lenLimit = p->matchMaxLen;
++    p->lenLimit = lenLimit;
++  }
++  p->posLimit = p->pos + limit;
++}
++
++void MatchFinder_Init(CMatchFinder *p)
++{
++  UInt32 i;
++  for (i = 0; i < p->hashSizeSum; i++)
++    p->hash[i] = kEmptyHashValue;
++  p->cyclicBufferPos = 0;
++  p->buffer = p->bufferBase;
++  p->pos = p->streamPos = p->cyclicBufferSize;
++  p->result = SZ_OK;
++  p->streamEndWasReached = 0;
++  MatchFinder_ReadBlock(p);
++  MatchFinder_SetLimits(p);
++}
++
++static UInt32 MatchFinder_GetSubValue(CMatchFinder *p)
++{
++  return (p->pos - p->historySize - 1) & kNormalizeMask;
++}
++
++void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
++{
++  UInt32 i;
++  for (i = 0; i < numItems; i++)
++  {
++    UInt32 value = items[i];
++    if (value <= subValue)
++      value = kEmptyHashValue;
++    else
++      value -= subValue;
++    items[i] = value;
++  }
++}
++
++static void MatchFinder_Normalize(CMatchFinder *p)
++{
++  UInt32 subValue = MatchFinder_GetSubValue(p);
++  MatchFinder_Normalize3(subValue, p->hash, p->hashSizeSum + p->numSons);
++  MatchFinder_ReduceOffsets(p, subValue);
++}
++
++static void MatchFinder_CheckLimits(CMatchFinder *p)
++{
++  if (p->pos == kMaxValForNormalize)
++    MatchFinder_Normalize(p);
++  if (!p->streamEndWasReached && p->keepSizeAfter == p->streamPos - p->pos)
++    MatchFinder_CheckAndMoveAndRead(p);
++  if (p->cyclicBufferPos == p->cyclicBufferSize)
++    p->cyclicBufferPos = 0;
++  MatchFinder_SetLimits(p);
++}
++
++static UInt32 * Hc_GetMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
++    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
++    UInt32 *distances, UInt32 maxLen)
++{
++  son[_cyclicBufferPos] = curMatch;
++  for (;;)
++  {
++    UInt32 delta = pos - curMatch;
++    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
++      return distances;
++    {
++      const Byte *pb = cur - delta;
++      curMatch = son[_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)];
++      if (pb[maxLen] == cur[maxLen] && *pb == *cur)
++      {
++        UInt32 len = 0;
++        while (++len != lenLimit)
++          if (pb[len] != cur[len])
++            break;
++        if (maxLen < len)
++        {
++          *distances++ = maxLen = len;
++          *distances++ = delta - 1;
++          if (len == lenLimit)
++            return distances;
++        }
++      }
++    }
++  }
++}
++
++UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
++    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
++    UInt32 *distances, UInt32 maxLen)
++{
++  CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1;
++  CLzRef *ptr1 = son + (_cyclicBufferPos << 1);
++  UInt32 len0 = 0, len1 = 0;
++  for (;;)
++  {
++    UInt32 delta = pos - curMatch;
++    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
++    {
++      *ptr0 = *ptr1 = kEmptyHashValue;
++      return distances;
++    }
++    {
++      CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1);
++      const Byte *pb = cur - delta;
++      UInt32 len = (len0 < len1 ? len0 : len1);
++      if (pb[len] == cur[len])
++      {
++        if (++len != lenLimit && pb[len] == cur[len])
++          while (++len != lenLimit)
++            if (pb[len] != cur[len])
++              break;
++        if (maxLen < len)
++        {
++          *distances++ = maxLen = len;
++          *distances++ = delta - 1;
++          if (len == lenLimit)
++          {
++            *ptr1 = pair[0];
++            *ptr0 = pair[1];
++            return distances;
++          }
++        }
++      }
++      if (pb[len] < cur[len])
++      {
++        *ptr1 = curMatch;
++        ptr1 = pair + 1;
++        curMatch = *ptr1;
++        len1 = len;
++      }
++      else
++      {
++        *ptr0 = curMatch;
++        ptr0 = pair;
++        curMatch = *ptr0;
++        len0 = len;
++      }
++    }
++  }
++}
++
++static void SkipMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
++    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue)
++{
++  CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1;
++  CLzRef *ptr1 = son + (_cyclicBufferPos << 1);
++  UInt32 len0 = 0, len1 = 0;
++  for (;;)
++  {
++    UInt32 delta = pos - curMatch;
++    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
++    {
++      *ptr0 = *ptr1 = kEmptyHashValue;
++      return;
++    }
++    {
++      CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1);
++      const Byte *pb = cur - delta;
++      UInt32 len = (len0 < len1 ? len0 : len1);
++      if (pb[len] == cur[len])
++      {
++        while (++len != lenLimit)
++          if (pb[len] != cur[len])
++            break;
++        {
++          if (len == lenLimit)
++          {
++            *ptr1 = pair[0];
++            *ptr0 = pair[1];
++            return;
++          }
++        }
++      }
++      if (pb[len] < cur[len])
++      {
++        *ptr1 = curMatch;
++        ptr1 = pair + 1;
++        curMatch = *ptr1;
++        len1 = len;
++      }
++      else
++      {
++        *ptr0 = curMatch;
++        ptr0 = pair;
++        curMatch = *ptr0;
++        len0 = len;
++      }
++    }
++  }
++}
++
++#define MOVE_POS \
++  ++p->cyclicBufferPos; \
++  p->buffer++; \
++  if (++p->pos == p->posLimit) MatchFinder_CheckLimits(p);
++
++#define MOVE_POS_RET MOVE_POS return offset;
++
++static void MatchFinder_MovePos(CMatchFinder *p) { MOVE_POS; }
++
++#define GET_MATCHES_HEADER2(minLen, ret_op) \
++  UInt32 lenLimit; UInt32 hashValue; const Byte *cur; UInt32 curMatch; \
++  lenLimit = p->lenLimit; { if (lenLimit < minLen) { MatchFinder_MovePos(p); ret_op; }} \
++  cur = p->buffer;
++
++#define GET_MATCHES_HEADER(minLen) GET_MATCHES_HEADER2(minLen, return 0)
++#define SKIP_HEADER(minLen)        GET_MATCHES_HEADER2(minLen, continue)
++
++#define MF_PARAMS(p) p->pos, p->buffer, p->son, p->cyclicBufferPos, p->cyclicBufferSize, p->cutValue
++
++#define GET_MATCHES_FOOTER(offset, maxLen) \
++  offset = (UInt32)(GetMatchesSpec1(lenLimit, curMatch, MF_PARAMS(p), \
++  distances + offset, maxLen) - distances); MOVE_POS_RET;
++
++#define SKIP_FOOTER \
++  SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MOVE_POS;
++
++static UInt32 Bt2_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++  UInt32 offset;
++  GET_MATCHES_HEADER(2)
++  HASH2_CALC;
++  curMatch = p->hash[hashValue];
++  p->hash[hashValue] = p->pos;
++  offset = 0;
++  GET_MATCHES_FOOTER(offset, 1)
++}
++
++UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++  UInt32 offset;
++  GET_MATCHES_HEADER(3)
++  HASH_ZIP_CALC;
++  curMatch = p->hash[hashValue];
++  p->hash[hashValue] = p->pos;
++  offset = 0;
++  GET_MATCHES_FOOTER(offset, 2)
++}
++
++static UInt32 Bt3_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++  UInt32 hash2Value, delta2, maxLen, offset;
++  GET_MATCHES_HEADER(3)
++
++  HASH3_CALC;
++
++  delta2 = p->pos - p->hash[hash2Value];
++  curMatch = p->hash[kFix3HashSize + hashValue];
++  
++  p->hash[hash2Value] =
++  p->hash[kFix3HashSize + hashValue] = p->pos;
++
++
++  maxLen = 2;
++  offset = 0;
++  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
++  {
++    for (; maxLen != lenLimit; maxLen++)
++      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
++        break;
++    distances[0] = maxLen;
++    distances[1] = delta2 - 1;
++    offset = 2;
++    if (maxLen == lenLimit)
++    {
++      SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
++      MOVE_POS_RET;
++    }
++  }
++  GET_MATCHES_FOOTER(offset, maxLen)
++}
++
++static UInt32 Bt4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++  UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
++  GET_MATCHES_HEADER(4)
++
++  HASH4_CALC;
++
++  delta2 = p->pos - p->hash[                hash2Value];
++  delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
++  curMatch = p->hash[kFix4HashSize + hashValue];
++  
++  p->hash[                hash2Value] =
++  p->hash[kFix3HashSize + hash3Value] =
++  p->hash[kFix4HashSize + hashValue] = p->pos;
++
++  maxLen = 1;
++  offset = 0;
++  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
++  {
++    distances[0] = maxLen = 2;
++    distances[1] = delta2 - 1;
++    offset = 2;
++  }
++  if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
++  {
++    maxLen = 3;
++    distances[offset + 1] = delta3 - 1;
++    offset += 2;
++    delta2 = delta3;
++  }
++  if (offset != 0)
++  {
++    for (; maxLen != lenLimit; maxLen++)
++      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
++        break;
++    distances[offset - 2] = maxLen;
++    if (maxLen == lenLimit)
++    {
++      SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
++      MOVE_POS_RET;
++    }
++  }
++  if (maxLen < 3)
++    maxLen = 3;
++  GET_MATCHES_FOOTER(offset, maxLen)
++}
++
++static UInt32 Hc4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++  UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
++  GET_MATCHES_HEADER(4)
++
++  HASH4_CALC;
++
++  delta2 = p->pos - p->hash[                hash2Value];
++  delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
++  curMatch = p->hash[kFix4HashSize + hashValue];
++
++  p->hash[                hash2Value] =
++  p->hash[kFix3HashSize + hash3Value] =
++  p->hash[kFix4HashSize + hashValue] = p->pos;
++
++  maxLen = 1;
++  offset = 0;
++  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
++  {
++    distances[0] = maxLen = 2;
++    distances[1] = delta2 - 1;
++    offset = 2;
++  }
++  if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
++  {
++    maxLen = 3;
++    distances[offset + 1] = delta3 - 1;
++    offset += 2;
++    delta2 = delta3;
++  }
++  if (offset != 0)
++  {
++    for (; maxLen != lenLimit; maxLen++)
++      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
++        break;
++    distances[offset - 2] = maxLen;
++    if (maxLen == lenLimit)
++    {
++      p->son[p->cyclicBufferPos] = curMatch;
++      MOVE_POS_RET;
++    }
++  }
++  if (maxLen < 3)
++    maxLen = 3;
++  offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
++    distances + offset, maxLen) - (distances));
++  MOVE_POS_RET
++}
++
++UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++  UInt32 offset;
++  GET_MATCHES_HEADER(3)
++  HASH_ZIP_CALC;
++  curMatch = p->hash[hashValue];
++  p->hash[hashValue] = p->pos;
++  offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
++    distances, 2) - (distances));
++  MOVE_POS_RET
++}
++
++static void Bt2_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++  do
++  {
++    SKIP_HEADER(2)
++    HASH2_CALC;
++    curMatch = p->hash[hashValue];
++    p->hash[hashValue] = p->pos;
++    SKIP_FOOTER
++  }
++  while (--num != 0);
++}
++
++void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++  do
++  {
++    SKIP_HEADER(3)
++    HASH_ZIP_CALC;
++    curMatch = p->hash[hashValue];
++    p->hash[hashValue] = p->pos;
++    SKIP_FOOTER
++  }
++  while (--num != 0);
++}
++
++static void Bt3_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++  do
++  {
++    UInt32 hash2Value;
++    SKIP_HEADER(3)
++    HASH3_CALC;
++    curMatch = p->hash[kFix3HashSize + hashValue];
++    p->hash[hash2Value] =
++    p->hash[kFix3HashSize + hashValue] = p->pos;
++    SKIP_FOOTER
++  }
++  while (--num != 0);
++}
++
++static void Bt4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++  do
++  {
++    UInt32 hash2Value, hash3Value;
++    SKIP_HEADER(4)
++    HASH4_CALC;
++    curMatch = p->hash[kFix4HashSize + hashValue];
++    p->hash[                hash2Value] =
++    p->hash[kFix3HashSize + hash3Value] = p->pos;
++    p->hash[kFix4HashSize + hashValue] = p->pos;
++    SKIP_FOOTER
++  }
++  while (--num != 0);
++}
++
++static void Hc4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++  do
++  {
++    UInt32 hash2Value, hash3Value;
++    SKIP_HEADER(4)
++    HASH4_CALC;
++    curMatch = p->hash[kFix4HashSize + hashValue];
++    p->hash[                hash2Value] =
++    p->hash[kFix3HashSize + hash3Value] =
++    p->hash[kFix4HashSize + hashValue] = p->pos;
++    p->son[p->cyclicBufferPos] = curMatch;
++    MOVE_POS
++  }
++  while (--num != 0);
++}
++
++void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++  do
++  {
++    SKIP_HEADER(3)
++    HASH_ZIP_CALC;
++    curMatch = p->hash[hashValue];
++    p->hash[hashValue] = p->pos;
++    p->son[p->cyclicBufferPos] = curMatch;
++    MOVE_POS
++  }
++  while (--num != 0);
++}
++
++void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable)
++{
++  vTable->Init = (Mf_Init_Func)MatchFinder_Init;
++  vTable->GetIndexByte = (Mf_GetIndexByte_Func)MatchFinder_GetIndexByte;
++  vTable->GetNumAvailableBytes = (Mf_GetNumAvailableBytes_Func)MatchFinder_GetNumAvailableBytes;
++  vTable->GetPointerToCurrentPos = (Mf_GetPointerToCurrentPos_Func)MatchFinder_GetPointerToCurrentPos;
++  if (!p->btMode)
++  {
++    vTable->GetMatches = (Mf_GetMatches_Func)Hc4_MatchFinder_GetMatches;
++    vTable->Skip = (Mf_Skip_Func)Hc4_MatchFinder_Skip;
++  }
++  else if (p->numHashBytes == 2)
++  {
++    vTable->GetMatches = (Mf_GetMatches_Func)Bt2_MatchFinder_GetMatches;
++    vTable->Skip = (Mf_Skip_Func)Bt2_MatchFinder_Skip;
++  }
++  else if (p->numHashBytes == 3)
++  {
++    vTable->GetMatches = (Mf_GetMatches_Func)Bt3_MatchFinder_GetMatches;
++    vTable->Skip = (Mf_Skip_Func)Bt3_MatchFinder_Skip;
++  }
++  else
++  {
++    vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches;
++    vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip;
++  }
++}
+--- /dev/null
++++ b/lib/lzma/LzmaDec.c
+@@ -0,0 +1,999 @@
++/* LzmaDec.c -- LZMA Decoder
++2009-09-20 : Igor Pavlov : Public domain */
++
++#include "LzmaDec.h"
++
++#include <string.h>
++
++#define kNumTopBits 24
++#define kTopValue ((UInt32)1 << kNumTopBits)
++
++#define kNumBitModelTotalBits 11
++#define kBitModelTotal (1 << kNumBitModelTotalBits)
++#define kNumMoveBits 5
++
++#define RC_INIT_SIZE 5
++
++#define NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | (*buf++); }
++
++#define IF_BIT_0(p) ttt = *(p); NORMALIZE; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
++#define UPDATE_0(p) range = bound; *(p) = (CLzmaProb)(ttt + ((kBitModelTotal - ttt) >> kNumMoveBits));
++#define UPDATE_1(p) range -= bound; code -= bound; *(p) = (CLzmaProb)(ttt - (ttt >> kNumMoveBits));
++#define GET_BIT2(p, i, A0, A1) IF_BIT_0(p) \
++  { UPDATE_0(p); i = (i + i); A0; } else \
++  { UPDATE_1(p); i = (i + i) + 1; A1; }
++#define GET_BIT(p, i) GET_BIT2(p, i, ; , ;)
++
++#define TREE_GET_BIT(probs, i) { GET_BIT((probs + i), i); }
++#define TREE_DECODE(probs, limit, i) \
++  { i = 1; do { TREE_GET_BIT(probs, i); } while (i < limit); i -= limit; }
++
++/* #define _LZMA_SIZE_OPT */
++
++#ifdef _LZMA_SIZE_OPT
++#define TREE_6_DECODE(probs, i) TREE_DECODE(probs, (1 << 6), i)
++#else
++#define TREE_6_DECODE(probs, i) \
++  { i = 1; \
++  TREE_GET_BIT(probs, i); \
++  TREE_GET_BIT(probs, i); \
++  TREE_GET_BIT(probs, i); \
++  TREE_GET_BIT(probs, i); \
++  TREE_GET_BIT(probs, i); \
++  TREE_GET_BIT(probs, i); \
++  i -= 0x40; }
++#endif
++
++#define NORMALIZE_CHECK if (range < kTopValue) { if (buf >= bufLimit) return DUMMY_ERROR; range <<= 8; code = (code << 8) | (*buf++); }
++
++#define IF_BIT_0_CHECK(p) ttt = *(p); NORMALIZE_CHECK; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
++#define UPDATE_0_CHECK range = bound;
++#define UPDATE_1_CHECK range -= bound; code -= bound;
++#define GET_BIT2_CHECK(p, i, A0, A1) IF_BIT_0_CHECK(p) \
++  { UPDATE_0_CHECK; i = (i + i); A0; } else \
++  { UPDATE_1_CHECK; i = (i + i) + 1; A1; }
++#define GET_BIT_CHECK(p, i) GET_BIT2_CHECK(p, i, ; , ;)
++#define TREE_DECODE_CHECK(probs, limit, i) \
++  { i = 1; do { GET_BIT_CHECK(probs + i, i) } while (i < limit); i -= limit; }
++
++
++#define kNumPosBitsMax 4
++#define kNumPosStatesMax (1 << kNumPosBitsMax)
++
++#define kLenNumLowBits 3
++#define kLenNumLowSymbols (1 << kLenNumLowBits)
++#define kLenNumMidBits 3
++#define kLenNumMidSymbols (1 << kLenNumMidBits)
++#define kLenNumHighBits 8
++#define kLenNumHighSymbols (1 << kLenNumHighBits)
++
++#define LenChoice 0
++#define LenChoice2 (LenChoice + 1)
++#define LenLow (LenChoice2 + 1)
++#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
++#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
++#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
++
++
++#define kNumStates 12
++#define kNumLitStates 7
++
++#define kStartPosModelIndex 4
++#define kEndPosModelIndex 14
++#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
++
++#define kNumPosSlotBits 6
++#define kNumLenToPosStates 4
++
++#define kNumAlignBits 4
++#define kAlignTableSize (1 << kNumAlignBits)
++
++#define kMatchMinLen 2
++#define kMatchSpecLenStart (kMatchMinLen + kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols)
++
++#define IsMatch 0
++#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
++#define IsRepG0 (IsRep + kNumStates)
++#define IsRepG1 (IsRepG0 + kNumStates)
++#define IsRepG2 (IsRepG1 + kNumStates)
++#define IsRep0Long (IsRepG2 + kNumStates)
++#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
++#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
++#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
++#define LenCoder (Align + kAlignTableSize)
++#define RepLenCoder (LenCoder + kNumLenProbs)
++#define Literal (RepLenCoder + kNumLenProbs)
++
++#define LZMA_BASE_SIZE 1846
++#define LZMA_LIT_SIZE 768
++
++#define LzmaProps_GetNumProbs(p) ((UInt32)LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((p)->lc + (p)->lp)))
++
++#if Literal != LZMA_BASE_SIZE
++StopCompilingDueBUG
++#endif
++
++#define LZMA_DIC_MIN (1 << 12)
++
++/* First LZMA-symbol is always decoded.
++And it decodes new LZMA-symbols while (buf < bufLimit), but "buf" is without last normalization
++Out:
++  Result:
++    SZ_OK - OK
++    SZ_ERROR_DATA - Error
++  p->remainLen:
++    < kMatchSpecLenStart : normal remain
++    = kMatchSpecLenStart : finished
++    = kMatchSpecLenStart + 1 : Flush marker
++    = kMatchSpecLenStart + 2 : State Init Marker
++*/
++
++static int MY_FAST_CALL LzmaDec_DecodeReal(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
++{
++  CLzmaProb *probs = p->probs;
++
++  unsigned state = p->state;
++  UInt32 rep0 = p->reps[0], rep1 = p->reps[1], rep2 = p->reps[2], rep3 = p->reps[3];
++  unsigned pbMask = ((unsigned)1 << (p->prop.pb)) - 1;
++  unsigned lpMask = ((unsigned)1 << (p->prop.lp)) - 1;
++  unsigned lc = p->prop.lc;
++
++  Byte *dic = p->dic;
++  SizeT dicBufSize = p->dicBufSize;
++  SizeT dicPos = p->dicPos;
++  
++  UInt32 processedPos = p->processedPos;
++  UInt32 checkDicSize = p->checkDicSize;
++  unsigned len = 0;
++
++  const Byte *buf = p->buf;
++  UInt32 range = p->range;
++  UInt32 code = p->code;
++
++  do
++  {
++    CLzmaProb *prob;
++    UInt32 bound;
++    unsigned ttt;
++    unsigned posState = processedPos & pbMask;
++
++    prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
++    IF_BIT_0(prob)
++    {
++      unsigned symbol;
++      UPDATE_0(prob);
++      prob = probs + Literal;
++      if (checkDicSize != 0 || processedPos != 0)
++        prob += (LZMA_LIT_SIZE * (((processedPos & lpMask) << lc) +
++        (dic[(dicPos == 0 ? dicBufSize : dicPos) - 1] >> (8 - lc))));
++
++      if (state < kNumLitStates)
++      {
++        state -= (state < 4) ? state : 3;
++        symbol = 1;
++        do { GET_BIT(prob + symbol, symbol) } while (symbol < 0x100);
++      }
++      else
++      {
++        unsigned matchByte = p->dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
++        unsigned offs = 0x100;
++        state -= (state < 10) ? 3 : 6;
++        symbol = 1;
++        do
++        {
++          unsigned bit;
++          CLzmaProb *probLit;
++          matchByte <<= 1;
++          bit = (matchByte & offs);
++          probLit = prob + offs + bit + symbol;
++          GET_BIT2(probLit, symbol, offs &= ~bit, offs &= bit)
++        }
++        while (symbol < 0x100);
++      }
++      dic[dicPos++] = (Byte)symbol;
++      processedPos++;
++      continue;
++    }
++    else
++    {
++      UPDATE_1(prob);
++      prob = probs + IsRep + state;
++      IF_BIT_0(prob)
++      {
++        UPDATE_0(prob);
++        state += kNumStates;
++        prob = probs + LenCoder;
++      }
++      else
++      {
++        UPDATE_1(prob);
++        if (checkDicSize == 0 && processedPos == 0)
++          return SZ_ERROR_DATA;
++        prob = probs + IsRepG0 + state;
++        IF_BIT_0(prob)
++        {
++          UPDATE_0(prob);
++          prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
++          IF_BIT_0(prob)
++          {
++            UPDATE_0(prob);
++            dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
++            dicPos++;
++            processedPos++;
++            state = state < kNumLitStates ? 9 : 11;
++            continue;
++          }
++          UPDATE_1(prob);
++        }
++        else
++        {
++          UInt32 distance;
++          UPDATE_1(prob);
++          prob = probs + IsRepG1 + state;
++          IF_BIT_0(prob)
++          {
++            UPDATE_0(prob);
++            distance = rep1;
++          }
++          else
++          {
++            UPDATE_1(prob);
++            prob = probs + IsRepG2 + state;
++            IF_BIT_0(prob)
++            {
++              UPDATE_0(prob);
++              distance = rep2;
++            }
++            else
++            {
++              UPDATE_1(prob);
++              distance = rep3;
++              rep3 = rep2;
++            }
++            rep2 = rep1;
++          }
++          rep1 = rep0;
++          rep0 = distance;
++        }
++        state = state < kNumLitStates ? 8 : 11;
++        prob = probs + RepLenCoder;
++      }
++      {
++        unsigned limit, offset;
++        CLzmaProb *probLen = prob + LenChoice;
++        IF_BIT_0(probLen)
++        {
++          UPDATE_0(probLen);
++          probLen = prob + LenLow + (posState << kLenNumLowBits);
++          offset = 0;
++          limit = (1 << kLenNumLowBits);
++        }
++        else
++        {
++          UPDATE_1(probLen);
++          probLen = prob + LenChoice2;
++          IF_BIT_0(probLen)
++          {
++            UPDATE_0(probLen);
++            probLen = prob + LenMid + (posState << kLenNumMidBits);
++            offset = kLenNumLowSymbols;
++            limit = (1 << kLenNumMidBits);
++          }
++          else
++          {
++            UPDATE_1(probLen);
++            probLen = prob + LenHigh;
++            offset = kLenNumLowSymbols + kLenNumMidSymbols;
++            limit = (1 << kLenNumHighBits);
++          }
++        }
++        TREE_DECODE(probLen, limit, len);
++        len += offset;
++      }
++
++      if (state >= kNumStates)
++      {
++        UInt32 distance;
++        prob = probs + PosSlot +
++            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << kNumPosSlotBits);
++        TREE_6_DECODE(prob, distance);
++        if (distance >= kStartPosModelIndex)
++        {
++          unsigned posSlot = (unsigned)distance;
++          int numDirectBits = (int)(((distance >> 1) - 1));
++          distance = (2 | (distance & 1));
++          if (posSlot < kEndPosModelIndex)
++          {
++            distance <<= numDirectBits;
++            prob = probs + SpecPos + distance - posSlot - 1;
++            {
++              UInt32 mask = 1;
++              unsigned i = 1;
++              do
++              {
++                GET_BIT2(prob + i, i, ; , distance |= mask);
++                mask <<= 1;
++              }
++              while (--numDirectBits != 0);
++            }
++          }
++          else
++          {
++            numDirectBits -= kNumAlignBits;
++            do
++            {
++              NORMALIZE
++              range >>= 1;
++              
++              {
++                UInt32 t;
++                code -= range;
++                t = (0 - ((UInt32)code >> 31)); /* (UInt32)((Int32)code >> 31) */
++                distance = (distance << 1) + (t + 1);
++                code += range & t;
++              }
++              /*
++              distance <<= 1;
++              if (code >= range)
++              {
++                code -= range;
++                distance |= 1;
++              }
++              */
++            }
++            while (--numDirectBits != 0);
++            prob = probs + Align;
++            distance <<= kNumAlignBits;
++            {
++              unsigned i = 1;
++              GET_BIT2(prob + i, i, ; , distance |= 1);
++              GET_BIT2(prob + i, i, ; , distance |= 2);
++              GET_BIT2(prob + i, i, ; , distance |= 4);
++              GET_BIT2(prob + i, i, ; , distance |= 8);
++            }
++            if (distance == (UInt32)0xFFFFFFFF)
++            {
++              len += kMatchSpecLenStart;
++              state -= kNumStates;
++              break;
++            }
++          }
++        }
++        rep3 = rep2;
++        rep2 = rep1;
++        rep1 = rep0;
++        rep0 = distance + 1;
++        if (checkDicSize == 0)
++        {
++          if (distance >= processedPos)
++            return SZ_ERROR_DATA;
++        }
++        else if (distance >= checkDicSize)
++          return SZ_ERROR_DATA;
++        state = (state < kNumStates + kNumLitStates) ? kNumLitStates : kNumLitStates + 3;
++      }
++
++      len += kMatchMinLen;
++
++      if (limit == dicPos)
++        return SZ_ERROR_DATA;
++      {
++        SizeT rem = limit - dicPos;
++        unsigned curLen = ((rem < len) ? (unsigned)rem : len);
++        SizeT pos = (dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0);
++
++        processedPos += curLen;
++
++        len -= curLen;
++        if (pos + curLen <= dicBufSize)
++        {
++          Byte *dest = dic + dicPos;
++          ptrdiff_t src = (ptrdiff_t)pos - (ptrdiff_t)dicPos;
++          const Byte *lim = dest + curLen;
++          dicPos += curLen;
++          do
++            *(dest) = (Byte)*(dest + src);
++          while (++dest != lim);
++        }
++        else
++        {
++          do
++          {
++            dic[dicPos++] = dic[pos];
++            if (++pos == dicBufSize)
++              pos = 0;
++          }
++          while (--curLen != 0);
++        }
++      }
++    }
++  }
++  while (dicPos < limit && buf < bufLimit);
++  NORMALIZE;
++  p->buf = buf;
++  p->range = range;
++  p->code = code;
++  p->remainLen = len;
++  p->dicPos = dicPos;
++  p->processedPos = processedPos;
++  p->reps[0] = rep0;
++  p->reps[1] = rep1;
++  p->reps[2] = rep2;
++  p->reps[3] = rep3;
++  p->state = state;
++
++  return SZ_OK;
++}
++
++static void MY_FAST_CALL LzmaDec_WriteRem(CLzmaDec *p, SizeT limit)
++{
++  if (p->remainLen != 0 && p->remainLen < kMatchSpecLenStart)
++  {
++    Byte *dic = p->dic;
++    SizeT dicPos = p->dicPos;
++    SizeT dicBufSize = p->dicBufSize;
++    unsigned len = p->remainLen;
++    UInt32 rep0 = p->reps[0];
++    if (limit - dicPos < len)
++      len = (unsigned)(limit - dicPos);
++
++    if (p->checkDicSize == 0 && p->prop.dicSize - p->processedPos <= len)
++      p->checkDicSize = p->prop.dicSize;
++
++    p->processedPos += len;
++    p->remainLen -= len;
++    while (len-- != 0)
++    {
++      dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
++      dicPos++;
++    }
++    p->dicPos = dicPos;
++  }
++}
++
++static int MY_FAST_CALL LzmaDec_DecodeReal2(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
++{
++  do
++  {
++    SizeT limit2 = limit;
++    if (p->checkDicSize == 0)
++    {
++      UInt32 rem = p->prop.dicSize - p->processedPos;
++      if (limit - p->dicPos > rem)
++        limit2 = p->dicPos + rem;
++    }
++    RINOK(LzmaDec_DecodeReal(p, limit2, bufLimit));
++    if (p->processedPos >= p->prop.dicSize)
++      p->checkDicSize = p->prop.dicSize;
++    LzmaDec_WriteRem(p, limit);
++  }
++  while (p->dicPos < limit && p->buf < bufLimit && p->remainLen < kMatchSpecLenStart);
++
++  if (p->remainLen > kMatchSpecLenStart)
++  {
++    p->remainLen = kMatchSpecLenStart;
++  }
++  return 0;
++}
++
++typedef enum
++{
++  DUMMY_ERROR, /* unexpected end of input stream */
++  DUMMY_LIT,
++  DUMMY_MATCH,
++  DUMMY_REP
++} ELzmaDummy;
++
++static ELzmaDummy LzmaDec_TryDummy(const CLzmaDec *p, const Byte *buf, SizeT inSize)
++{
++  UInt32 range = p->range;
++  UInt32 code = p->code;
++  const Byte *bufLimit = buf + inSize;
++  CLzmaProb *probs = p->probs;
++  unsigned state = p->state;
++  ELzmaDummy res;
++
++  {
++    CLzmaProb *prob;
++    UInt32 bound;
++    unsigned ttt;
++    unsigned posState = (p->processedPos) & ((1 << p->prop.pb) - 1);
++
++    prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
++    IF_BIT_0_CHECK(prob)
++    {
++      UPDATE_0_CHECK
++
++      /* if (bufLimit - buf >= 7) return DUMMY_LIT; */
++
++      prob = probs + Literal;
++      if (p->checkDicSize != 0 || p->processedPos != 0)
++        prob += (LZMA_LIT_SIZE *
++          ((((p->processedPos) & ((1 << (p->prop.lp)) - 1)) << p->prop.lc) +
++          (p->dic[(p->dicPos == 0 ? p->dicBufSize : p->dicPos) - 1] >> (8 - p->prop.lc))));
++
++      if (state < kNumLitStates)
++      {
++        unsigned symbol = 1;
++        do { GET_BIT_CHECK(prob + symbol, symbol) } while (symbol < 0x100);
++      }
++      else
++      {
++        unsigned matchByte = p->dic[p->dicPos - p->reps[0] +
++            ((p->dicPos < p->reps[0]) ? p->dicBufSize : 0)];
++        unsigned offs = 0x100;
++        unsigned symbol = 1;
++        do
++        {
++          unsigned bit;
++          CLzmaProb *probLit;
++          matchByte <<= 1;
++          bit = (matchByte & offs);
++          probLit = prob + offs + bit + symbol;
++          GET_BIT2_CHECK(probLit, symbol, offs &= ~bit, offs &= bit)
++        }
++        while (symbol < 0x100);
++      }
++      res = DUMMY_LIT;
++    }
++    else
++    {
++      unsigned len;
++      UPDATE_1_CHECK;
++
++      prob = probs + IsRep + state;
++      IF_BIT_0_CHECK(prob)
++      {
++        UPDATE_0_CHECK;
++        state = 0;
++        prob = probs + LenCoder;
++        res = DUMMY_MATCH;
++      }
++      else
++      {
++        UPDATE_1_CHECK;
++        res = DUMMY_REP;
++        prob = probs + IsRepG0 + state;
++        IF_BIT_0_CHECK(prob)
++        {
++          UPDATE_0_CHECK;
++          prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
++          IF_BIT_0_CHECK(prob)
++          {
++            UPDATE_0_CHECK;
++            NORMALIZE_CHECK;
++            return DUMMY_REP;
++          }
++          else
++          {
++            UPDATE_1_CHECK;
++          }
++        }
++        else
++        {
++          UPDATE_1_CHECK;
++          prob = probs + IsRepG1 + state;
++          IF_BIT_0_CHECK(prob)
++          {
++            UPDATE_0_CHECK;
++          }
++          else
++          {
++            UPDATE_1_CHECK;
++            prob = probs + IsRepG2 + state;
++            IF_BIT_0_CHECK(prob)
++            {
++              UPDATE_0_CHECK;
++            }
++            else
++            {
++              UPDATE_1_CHECK;
++            }
++          }
++        }
++        state = kNumStates;
++        prob = probs + RepLenCoder;
++      }
++      {
++        unsigned limit, offset;
++        CLzmaProb *probLen = prob + LenChoice;
++        IF_BIT_0_CHECK(probLen)
++        {
++          UPDATE_0_CHECK;
++          probLen = prob + LenLow + (posState << kLenNumLowBits);
++          offset = 0;
++          limit = 1 << kLenNumLowBits;
++        }
++        else
++        {
++          UPDATE_1_CHECK;
++          probLen = prob + LenChoice2;
++          IF_BIT_0_CHECK(probLen)
++          {
++            UPDATE_0_CHECK;
++            probLen = prob + LenMid + (posState << kLenNumMidBits);
++            offset = kLenNumLowSymbols;
++            limit = 1 << kLenNumMidBits;
++          }
++          else
++          {
++            UPDATE_1_CHECK;
++            probLen = prob + LenHigh;
++            offset = kLenNumLowSymbols + kLenNumMidSymbols;
++            limit = 1 << kLenNumHighBits;
++          }
++        }
++        TREE_DECODE_CHECK(probLen, limit, len);
++        len += offset;
++      }
++
++      if (state < 4)
++      {
++        unsigned posSlot;
++        prob = probs + PosSlot +
++            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
++            kNumPosSlotBits);
++        TREE_DECODE_CHECK(prob, 1 << kNumPosSlotBits, posSlot);
++        if (posSlot >= kStartPosModelIndex)
++        {
++          int numDirectBits = ((posSlot >> 1) - 1);
++
++          /* if (bufLimit - buf >= 8) return DUMMY_MATCH; */
++
++          if (posSlot < kEndPosModelIndex)
++          {
++            prob = probs + SpecPos + ((2 | (posSlot & 1)) << numDirectBits) - posSlot - 1;
++          }
++          else
++          {
++            numDirectBits -= kNumAlignBits;
++            do
++            {
++              NORMALIZE_CHECK
++              range >>= 1;
++              code -= range & (((code - range) >> 31) - 1);
++              /* if (code >= range) code -= range; */
++            }
++            while (--numDirectBits != 0);
++            prob = probs + Align;
++            numDirectBits = kNumAlignBits;
++          }
++          {
++            unsigned i = 1;
++            do
++            {
++              GET_BIT_CHECK(prob + i, i);
++            }
++            while (--numDirectBits != 0);
++          }
++        }
++      }
++    }
++  }
++  NORMALIZE_CHECK;
++  return res;
++}
++
++
++static void LzmaDec_InitRc(CLzmaDec *p, const Byte *data)
++{
++  p->code = ((UInt32)data[1] << 24) | ((UInt32)data[2] << 16) | ((UInt32)data[3] << 8) | ((UInt32)data[4]);
++  p->range = 0xFFFFFFFF;
++  p->needFlush = 0;
++}
++
++void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
++{
++  p->needFlush = 1;
++  p->remainLen = 0;
++  p->tempBufSize = 0;
++
++  if (initDic)
++  {
++    p->processedPos = 0;
++    p->checkDicSize = 0;
++    p->needInitState = 1;
++  }
++  if (initState)
++    p->needInitState = 1;
++}
++
++void LzmaDec_Init(CLzmaDec *p)
++{
++  p->dicPos = 0;
++  LzmaDec_InitDicAndState(p, True, True);
++}
++
++static void LzmaDec_InitStateReal(CLzmaDec *p)
++{
++  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (p->prop.lc + p->prop.lp));
++  UInt32 i;
++  CLzmaProb *probs = p->probs;
++  for (i = 0; i < numProbs; i++)
++    probs[i] = kBitModelTotal >> 1;
++  p->reps[0] = p->reps[1] = p->reps[2] = p->reps[3] = 1;
++  p->state = 0;
++  p->needInitState = 0;
++}
++
++SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
++    ELzmaFinishMode finishMode, ELzmaStatus *status)
++{
++  SizeT inSize = *srcLen;
++  (*srcLen) = 0;
++  LzmaDec_WriteRem(p, dicLimit);
++  
++  *status = LZMA_STATUS_NOT_SPECIFIED;
++
++  while (p->remainLen != kMatchSpecLenStart)
++  {
++      int checkEndMarkNow;
++
++      if (p->needFlush != 0)
++      {
++        for (; inSize > 0 && p->tempBufSize < RC_INIT_SIZE; (*srcLen)++, inSize--)
++          p->tempBuf[p->tempBufSize++] = *src++;
++        if (p->tempBufSize < RC_INIT_SIZE)
++        {
++          *status = LZMA_STATUS_NEEDS_MORE_INPUT;
++          return SZ_OK;
++        }
++        if (p->tempBuf[0] != 0)
++          return SZ_ERROR_DATA;
++
++        LzmaDec_InitRc(p, p->tempBuf);
++        p->tempBufSize = 0;
++      }
++
++      checkEndMarkNow = 0;
++      if (p->dicPos >= dicLimit)
++      {
++        if (p->remainLen == 0 && p->code == 0)
++        {
++          *status = LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK;
++          return SZ_OK;
++        }
++        if (finishMode == LZMA_FINISH_ANY)
++        {
++          *status = LZMA_STATUS_NOT_FINISHED;
++          return SZ_OK;
++        }
++        if (p->remainLen != 0)
++        {
++          *status = LZMA_STATUS_NOT_FINISHED;
++          return SZ_ERROR_DATA;
++        }
++        checkEndMarkNow = 1;
++      }
++
++      if (p->needInitState)
++        LzmaDec_InitStateReal(p);
++  
++      if (p->tempBufSize == 0)
++      {
++        SizeT processed;
++        const Byte *bufLimit;
++        if (inSize < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
++        {
++          int dummyRes = LzmaDec_TryDummy(p, src, inSize);
++          if (dummyRes == DUMMY_ERROR)
++          {
++            memcpy(p->tempBuf, src, inSize);
++            p->tempBufSize = (unsigned)inSize;
++            (*srcLen) += inSize;
++            *status = LZMA_STATUS_NEEDS_MORE_INPUT;
++            return SZ_OK;
++          }
++          if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
++          {
++            *status = LZMA_STATUS_NOT_FINISHED;
++            return SZ_ERROR_DATA;
++          }
++          bufLimit = src;
++        }
++        else
++          bufLimit = src + inSize - LZMA_REQUIRED_INPUT_MAX;
++        p->buf = src;
++        if (LzmaDec_DecodeReal2(p, dicLimit, bufLimit) != 0)
++          return SZ_ERROR_DATA;
++        processed = (SizeT)(p->buf - src);
++        (*srcLen) += processed;
++        src += processed;
++        inSize -= processed;
++      }
++      else
++      {
++        unsigned rem = p->tempBufSize, lookAhead = 0;
++        while (rem < LZMA_REQUIRED_INPUT_MAX && lookAhead < inSize)
++          p->tempBuf[rem++] = src[lookAhead++];
++        p->tempBufSize = rem;
++        if (rem < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
++        {
++          int dummyRes = LzmaDec_TryDummy(p, p->tempBuf, rem);
++          if (dummyRes == DUMMY_ERROR)
++          {
++            (*srcLen) += lookAhead;
++            *status = LZMA_STATUS_NEEDS_MORE_INPUT;
++            return SZ_OK;
++          }
++          if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
++          {
++            *status = LZMA_STATUS_NOT_FINISHED;
++            return SZ_ERROR_DATA;
++          }
++        }
++        p->buf = p->tempBuf;
++        if (LzmaDec_DecodeReal2(p, dicLimit, p->buf) != 0)
++          return SZ_ERROR_DATA;
++        lookAhead -= (rem - (unsigned)(p->buf - p->tempBuf));
++        (*srcLen) += lookAhead;
++        src += lookAhead;
++        inSize -= lookAhead;
++        p->tempBufSize = 0;
++      }
++  }
++  if (p->code == 0)
++    *status = LZMA_STATUS_FINISHED_WITH_MARK;
++  return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA;
++}
++
++SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status)
++{
++  SizeT outSize = *destLen;
++  SizeT inSize = *srcLen;
++  *srcLen = *destLen = 0;
++  for (;;)
++  {
++    SizeT inSizeCur = inSize, outSizeCur, dicPos;
++    ELzmaFinishMode curFinishMode;
++    SRes res;
++    if (p->dicPos == p->dicBufSize)
++      p->dicPos = 0;
++    dicPos = p->dicPos;
++    if (outSize > p->dicBufSize - dicPos)
++    {
++      outSizeCur = p->dicBufSize;
++      curFinishMode = LZMA_FINISH_ANY;
++    }
++    else
++    {
++      outSizeCur = dicPos + outSize;
++      curFinishMode = finishMode;
++    }
++
++    res = LzmaDec_DecodeToDic(p, outSizeCur, src, &inSizeCur, curFinishMode, status);
++    src += inSizeCur;
++    inSize -= inSizeCur;
++    *srcLen += inSizeCur;
++    outSizeCur = p->dicPos - dicPos;
++    memcpy(dest, p->dic + dicPos, outSizeCur);
++    dest += outSizeCur;
++    outSize -= outSizeCur;
++    *destLen += outSizeCur;
++    if (res != 0)
++      return res;
++    if (outSizeCur == 0 || outSize == 0)
++      return SZ_OK;
++  }
++}
++
++void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
++{
++  alloc->Free(alloc, p->probs);
++  p->probs = 0;
++}
++
++static void LzmaDec_FreeDict(CLzmaDec *p, ISzAlloc *alloc)
++{
++  alloc->Free(alloc, p->dic);
++  p->dic = 0;
++}
++
++void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc)
++{
++  LzmaDec_FreeProbs(p, alloc);
++  LzmaDec_FreeDict(p, alloc);
++}
++
++SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
++{
++  UInt32 dicSize;
++  Byte d;
++  
++  if (size < LZMA_PROPS_SIZE)
++    return SZ_ERROR_UNSUPPORTED;
++  else
++    dicSize = data[1] | ((UInt32)data[2] << 8) | ((UInt32)data[3] << 16) | ((UInt32)data[4] << 24);
++ 
++  if (dicSize < LZMA_DIC_MIN)
++    dicSize = LZMA_DIC_MIN;
++  p->dicSize = dicSize;
++
++  d = data[0];
++  if (d >= (9 * 5 * 5))
++    return SZ_ERROR_UNSUPPORTED;
++
++  p->lc = d % 9;
++  d /= 9;
++  p->pb = d / 5;
++  p->lp = d % 5;
++
++  return SZ_OK;
++}
++
++static SRes LzmaDec_AllocateProbs2(CLzmaDec *p, const CLzmaProps *propNew, ISzAlloc *alloc)
++{
++  UInt32 numProbs = LzmaProps_GetNumProbs(propNew);
++  if (p->probs == 0 || numProbs != p->numProbs)
++  {
++    LzmaDec_FreeProbs(p, alloc);
++    p->probs = (CLzmaProb *)alloc->Alloc(alloc, numProbs * sizeof(CLzmaProb));
++    p->numProbs = numProbs;
++    if (p->probs == 0)
++      return SZ_ERROR_MEM;
++  }
++  return SZ_OK;
++}
++
++SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
++{
++  CLzmaProps propNew;
++  RINOK(LzmaProps_Decode(&propNew, props, propsSize));
++  RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
++  p->prop = propNew;
++  return SZ_OK;
++}
++
++SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
++{
++  CLzmaProps propNew;
++  SizeT dicBufSize;
++  RINOK(LzmaProps_Decode(&propNew, props, propsSize));
++  RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
++  dicBufSize = propNew.dicSize;
++  if (p->dic == 0 || dicBufSize != p->dicBufSize)
++  {
++    LzmaDec_FreeDict(p, alloc);
++    p->dic = (Byte *)alloc->Alloc(alloc, dicBufSize);
++    if (p->dic == 0)
++    {
++      LzmaDec_FreeProbs(p, alloc);
++      return SZ_ERROR_MEM;
++    }
++  }
++  p->dicBufSize = dicBufSize;
++  p->prop = propNew;
++  return SZ_OK;
++}
++
++SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
++    const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
++    ELzmaStatus *status, ISzAlloc *alloc)
++{
++  CLzmaDec p;
++  SRes res;
++  SizeT inSize = *srcLen;
++  SizeT outSize = *destLen;
++  *srcLen = *destLen = 0;
++  if (inSize < RC_INIT_SIZE)
++    return SZ_ERROR_INPUT_EOF;
++
++  LzmaDec_Construct(&p);
++  res = LzmaDec_AllocateProbs(&p, propData, propSize, alloc);
++  if (res != 0)
++    return res;
++  p.dic = dest;
++  p.dicBufSize = outSize;
++
++  LzmaDec_Init(&p);
++  
++  *srcLen = inSize;
++  res = LzmaDec_DecodeToDic(&p, outSize, src, srcLen, finishMode, status);
++
++  if (res == SZ_OK && *status == LZMA_STATUS_NEEDS_MORE_INPUT)
++    res = SZ_ERROR_INPUT_EOF;
++
++  (*destLen) = p.dicPos;
++  LzmaDec_FreeProbs(&p, alloc);
++  return res;
++}
+--- /dev/null
++++ b/lib/lzma/LzmaEnc.c
+@@ -0,0 +1,2271 @@
++/* LzmaEnc.c -- LZMA Encoder
++2009-11-24 : Igor Pavlov : Public domain */
++
++#include <string.h>
++
++/* #define SHOW_STAT */
++/* #define SHOW_STAT2 */
++
++#if defined(SHOW_STAT) || defined(SHOW_STAT2)
++#include <stdio.h>
++#endif
++
++#include "LzmaEnc.h"
++
++/* disable MT */
++#define _7ZIP_ST
++
++#include "LzFind.h"
++#ifndef _7ZIP_ST
++#include "LzFindMt.h"
++#endif
++
++#ifdef SHOW_STAT
++static int ttt = 0;
++#endif
++
++#define kBlockSizeMax ((1 << LZMA_NUM_BLOCK_SIZE_BITS) - 1)
++
++#define kBlockSize (9 << 10)
++#define kUnpackBlockSize (1 << 18)
++#define kMatchArraySize (1 << 21)
++#define kMatchRecordMaxSize ((LZMA_MATCH_LEN_MAX * 2 + 3) * LZMA_MATCH_LEN_MAX)
++
++#define kNumMaxDirectBits (31)
++
++#define kNumTopBits 24
++#define kTopValue ((UInt32)1 << kNumTopBits)
++
++#define kNumBitModelTotalBits 11
++#define kBitModelTotal (1 << kNumBitModelTotalBits)
++#define kNumMoveBits 5
++#define kProbInitValue (kBitModelTotal >> 1)
++
++#define kNumMoveReducingBits 4
++#define kNumBitPriceShiftBits 4
++#define kBitPrice (1 << kNumBitPriceShiftBits)
++
++void LzmaEncProps_Init(CLzmaEncProps *p)
++{
++  p->level = 5;
++  p->dictSize = p->mc = 0;
++  p->lc = p->lp = p->pb = p->algo = p->fb = p->btMode = p->numHashBytes = p->numThreads = -1;
++  p->writeEndMark = 0;
++}
++
++void LzmaEncProps_Normalize(CLzmaEncProps *p)
++{
++  int level = p->level;
++  if (level < 0) level = 5;
++  p->level = level;
++  if (p->dictSize == 0) p->dictSize = (level <= 5 ? (1 << (level * 2 + 14)) : (level == 6 ? (1 << 25) : (1 << 26)));
++  if (p->lc < 0) p->lc = 3;
++  if (p->lp < 0) p->lp = 0;
++  if (p->pb < 0) p->pb = 2;
++  if (p->algo < 0) p->algo = (level < 5 ? 0 : 1);
++  if (p->fb < 0) p->fb = (level < 7 ? 32 : 64);
++  if (p->btMode < 0) p->btMode = (p->algo == 0 ? 0 : 1);
++  if (p->numHashBytes < 0) p->numHashBytes = 4;
++  if (p->mc == 0)  p->mc = (16 + (p->fb >> 1)) >> (p->btMode ? 0 : 1);
++  if (p->numThreads < 0)
++    p->numThreads =
++      #ifndef _7ZIP_ST
++      ((p->btMode && p->algo) ? 2 : 1);
++      #else
++      1;
++      #endif
++}
++
++UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
++{
++  CLzmaEncProps props = *props2;
++  LzmaEncProps_Normalize(&props);
++  return props.dictSize;
++}
++
++/* #define LZMA_LOG_BSR */
++/* Define it for Intel's CPU */
++
++
++#ifdef LZMA_LOG_BSR
++
++#define kDicLogSizeMaxCompress 30
++
++#define BSR2_RET(pos, res) { unsigned long i; _BitScanReverse(&i, (pos)); res = (i + i) + ((pos >> (i - 1)) & 1); }
++
++UInt32 GetPosSlot1(UInt32 pos)
++{
++  UInt32 res;
++  BSR2_RET(pos, res);
++  return res;
++}
++#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); }
++#define GetPosSlot(pos, res) { if (pos < 2) res = pos; else BSR2_RET(pos, res); }
++
++#else
++
++#define kNumLogBits (9 + (int)sizeof(size_t) / 2)
++#define kDicLogSizeMaxCompress ((kNumLogBits - 1) * 2 + 7)
++
++void LzmaEnc_FastPosInit(Byte *g_FastPos)
++{
++  int c = 2, slotFast;
++  g_FastPos[0] = 0;
++  g_FastPos[1] = 1;
++  
++  for (slotFast = 2; slotFast < kNumLogBits * 2; slotFast++)
++  {
++    UInt32 k = (1 << ((slotFast >> 1) - 1));
++    UInt32 j;
++    for (j = 0; j < k; j++, c++)
++      g_FastPos[c] = (Byte)slotFast;
++  }
++}
++
++#define BSR2_RET(pos, res) { UInt32 i = 6 + ((kNumLogBits - 1) & \
++  (0 - (((((UInt32)1 << (kNumLogBits + 6)) - 1) - pos) >> 31))); \
++  res = p->g_FastPos[pos >> i] + (i * 2); }
++/*
++#define BSR2_RET(pos, res) { res = (pos < (1 << (kNumLogBits + 6))) ? \
++  p->g_FastPos[pos >> 6] + 12 : \
++  p->g_FastPos[pos >> (6 + kNumLogBits - 1)] + (6 + (kNumLogBits - 1)) * 2; }
++*/
++
++#define GetPosSlot1(pos) p->g_FastPos[pos]
++#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); }
++#define GetPosSlot(pos, res) { if (pos < kNumFullDistances) res = p->g_FastPos[pos]; else BSR2_RET(pos, res); }
++
++#endif
++
++
++#define LZMA_NUM_REPS 4
++
++typedef unsigned CState;
++
++typedef struct
++{
++  UInt32 price;
++
++  CState state;
++  int prev1IsChar;
++  int prev2;
++
++  UInt32 posPrev2;
++  UInt32 backPrev2;
++
++  UInt32 posPrev;
++  UInt32 backPrev;
++  UInt32 backs[LZMA_NUM_REPS];
++} COptimal;
++
++#define kNumOpts (1 << 12)
++
++#define kNumLenToPosStates 4
++#define kNumPosSlotBits 6
++#define kDicLogSizeMin 0
++#define kDicLogSizeMax 32
++#define kDistTableSizeMax (kDicLogSizeMax * 2)
++
++
++#define kNumAlignBits 4
++#define kAlignTableSize (1 << kNumAlignBits)
++#define kAlignMask (kAlignTableSize - 1)
++
++#define kStartPosModelIndex 4
++#define kEndPosModelIndex 14
++#define kNumPosModels (kEndPosModelIndex - kStartPosModelIndex)
++
++#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
++
++#ifdef _LZMA_PROB32
++#define CLzmaProb UInt32
++#else
++#define CLzmaProb UInt16
++#endif
++
++#define LZMA_PB_MAX 4
++#define LZMA_LC_MAX 8
++#define LZMA_LP_MAX 4
++
++#define LZMA_NUM_PB_STATES_MAX (1 << LZMA_PB_MAX)
++
++
++#define kLenNumLowBits 3
++#define kLenNumLowSymbols (1 << kLenNumLowBits)
++#define kLenNumMidBits 3
++#define kLenNumMidSymbols (1 << kLenNumMidBits)
++#define kLenNumHighBits 8
++#define kLenNumHighSymbols (1 << kLenNumHighBits)
++
++#define kLenNumSymbolsTotal (kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols)
++
++#define LZMA_MATCH_LEN_MIN 2
++#define LZMA_MATCH_LEN_MAX (LZMA_MATCH_LEN_MIN + kLenNumSymbolsTotal - 1)
++
++#define kNumStates 12
++
++typedef struct
++{
++  CLzmaProb choice;
++  CLzmaProb choice2;
++  CLzmaProb low[LZMA_NUM_PB_STATES_MAX << kLenNumLowBits];
++  CLzmaProb mid[LZMA_NUM_PB_STATES_MAX << kLenNumMidBits];
++  CLzmaProb high[kLenNumHighSymbols];
++} CLenEnc;
++
++typedef struct
++{
++  CLenEnc p;
++  UInt32 prices[LZMA_NUM_PB_STATES_MAX][kLenNumSymbolsTotal];
++  UInt32 tableSize;
++  UInt32 counters[LZMA_NUM_PB_STATES_MAX];
++} CLenPriceEnc;
++
++typedef struct
++{
++  UInt32 range;
++  Byte cache;
++  UInt64 low;
++  UInt64 cacheSize;
++  Byte *buf;
++  Byte *bufLim;
++  Byte *bufBase;
++  ISeqOutStream *outStream;
++  UInt64 processed;
++  SRes res;
++} CRangeEnc;
++
++typedef struct
++{
++  CLzmaProb *litProbs;
++
++  CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX];
++  CLzmaProb isRep[kNumStates];
++  CLzmaProb isRepG0[kNumStates];
++  CLzmaProb isRepG1[kNumStates];
++  CLzmaProb isRepG2[kNumStates];
++  CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX];
++
++  CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits];
++  CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex];
++  CLzmaProb posAlignEncoder[1 << kNumAlignBits];
++  
++  CLenPriceEnc lenEnc;
++  CLenPriceEnc repLenEnc;
++
++  UInt32 reps[LZMA_NUM_REPS];
++  UInt32 state;
++} CSaveState;
++
++typedef struct
++{
++  IMatchFinder matchFinder;
++  void *matchFinderObj;
++
++  #ifndef _7ZIP_ST
++  Bool mtMode;
++  CMatchFinderMt matchFinderMt;
++  #endif
++
++  CMatchFinder matchFinderBase;
++
++  #ifndef _7ZIP_ST
++  Byte pad[128];
++  #endif
++  
++  UInt32 optimumEndIndex;
++  UInt32 optimumCurrentIndex;
++
++  UInt32 longestMatchLength;
++  UInt32 numPairs;
++  UInt32 numAvail;
++  COptimal opt[kNumOpts];
++  
++  #ifndef LZMA_LOG_BSR
++  Byte g_FastPos[1 << kNumLogBits];
++  #endif
++
++  UInt32 ProbPrices[kBitModelTotal >> kNumMoveReducingBits];
++  UInt32 matches[LZMA_MATCH_LEN_MAX * 2 + 2 + 1];
++  UInt32 numFastBytes;
++  UInt32 additionalOffset;
++  UInt32 reps[LZMA_NUM_REPS];
++  UInt32 state;
++
++  UInt32 posSlotPrices[kNumLenToPosStates][kDistTableSizeMax];
++  UInt32 distancesPrices[kNumLenToPosStates][kNumFullDistances];
++  UInt32 alignPrices[kAlignTableSize];
++  UInt32 alignPriceCount;
++
++  UInt32 distTableSize;
++
++  unsigned lc, lp, pb;
++  unsigned lpMask, pbMask;
++
++  CLzmaProb *litProbs;
++
++  CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX];
++  CLzmaProb isRep[kNumStates];
++  CLzmaProb isRepG0[kNumStates];
++  CLzmaProb isRepG1[kNumStates];
++  CLzmaProb isRepG2[kNumStates];
++  CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX];
++
++  CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits];
++  CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex];
++  CLzmaProb posAlignEncoder[1 << kNumAlignBits];
++  
++  CLenPriceEnc lenEnc;
++  CLenPriceEnc repLenEnc;
++
++  unsigned lclp;
++
++  Bool fastMode;
++  
++  CRangeEnc rc;
++
++  Bool writeEndMark;
++  UInt64 nowPos64;
++  UInt32 matchPriceCount;
++  Bool finished;
++  Bool multiThread;
++
++  SRes result;
++  UInt32 dictSize;
++  UInt32 matchFinderCycles;
++
++  int needInit;
++
++  CSaveState saveState;
++} CLzmaEnc;
++
++void LzmaEnc_SaveState(CLzmaEncHandle pp)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  CSaveState *dest = &p->saveState;
++  int i;
++  dest->lenEnc = p->lenEnc;
++  dest->repLenEnc = p->repLenEnc;
++  dest->state = p->state;
++
++  for (i = 0; i < kNumStates; i++)
++  {
++    memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
++    memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
++  }
++  for (i = 0; i < kNumLenToPosStates; i++)
++    memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
++  memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
++  memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
++  memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
++  memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
++  memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
++  memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
++  memcpy(dest->reps, p->reps, sizeof(p->reps));
++  memcpy(dest->litProbs, p->litProbs, (0x300 << p->lclp) * sizeof(CLzmaProb));
++}
++
++void LzmaEnc_RestoreState(CLzmaEncHandle pp)
++{
++  CLzmaEnc *dest = (CLzmaEnc *)pp;
++  const CSaveState *p = &dest->saveState;
++  int i;
++  dest->lenEnc = p->lenEnc;
++  dest->repLenEnc = p->repLenEnc;
++  dest->state = p->state;
++
++  for (i = 0; i < kNumStates; i++)
++  {
++    memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
++    memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
++  }
++  for (i = 0; i < kNumLenToPosStates; i++)
++    memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
++  memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
++  memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
++  memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
++  memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
++  memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
++  memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
++  memcpy(dest->reps, p->reps, sizeof(p->reps));
++  memcpy(dest->litProbs, p->litProbs, (0x300 << dest->lclp) * sizeof(CLzmaProb));
++}
++
++SRes LzmaEnc_SetProps(CLzmaEncHandle pp, const CLzmaEncProps *props2)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  CLzmaEncProps props = *props2;
++  LzmaEncProps_Normalize(&props);
++
++  if (props.lc > LZMA_LC_MAX || props.lp > LZMA_LP_MAX || props.pb > LZMA_PB_MAX ||
++      props.dictSize > (1 << kDicLogSizeMaxCompress) || props.dictSize > (1 << 30))
++    return SZ_ERROR_PARAM;
++  p->dictSize = props.dictSize;
++  p->matchFinderCycles = props.mc;
++  {
++    unsigned fb = props.fb;
++    if (fb < 5)
++      fb = 5;
++    if (fb > LZMA_MATCH_LEN_MAX)
++      fb = LZMA_MATCH_LEN_MAX;
++    p->numFastBytes = fb;
++  }
++  p->lc = props.lc;
++  p->lp = props.lp;
++  p->pb = props.pb;
++  p->fastMode = (props.algo == 0);
++  p->matchFinderBase.btMode = props.btMode;
++  {
++    UInt32 numHashBytes = 4;
++    if (props.btMode)
++    {
++      if (props.numHashBytes < 2)
++        numHashBytes = 2;
++      else if (props.numHashBytes < 4)
++        numHashBytes = props.numHashBytes;
++    }
++    p->matchFinderBase.numHashBytes = numHashBytes;
++  }
++
++  p->matchFinderBase.cutValue = props.mc;
++
++  p->writeEndMark = props.writeEndMark;
++
++  #ifndef _7ZIP_ST
++  /*
++  if (newMultiThread != _multiThread)
++  {
++    ReleaseMatchFinder();
++    _multiThread = newMultiThread;
++  }
++  */
++  p->multiThread = (props.numThreads > 1);
++  #endif
++
++  return SZ_OK;
++}
++
++static const int kLiteralNextStates[kNumStates] = {0, 0, 0, 0, 1, 2, 3, 4,  5,  6,   4, 5};
++static const int kMatchNextStates[kNumStates]   = {7, 7, 7, 7, 7, 7, 7, 10, 10, 10, 10, 10};
++static const int kRepNextStates[kNumStates]     = {8, 8, 8, 8, 8, 8, 8, 11, 11, 11, 11, 11};
++static const int kShortRepNextStates[kNumStates]= {9, 9, 9, 9, 9, 9, 9, 11, 11, 11, 11, 11};
++
++#define IsCharState(s) ((s) < 7)
++
++#define GetLenToPosState(len) (((len) < kNumLenToPosStates + 1) ? (len) - 2 : kNumLenToPosStates - 1)
++
++#define kInfinityPrice (1 << 30)
++
++static void RangeEnc_Construct(CRangeEnc *p)
++{
++  p->outStream = 0;
++  p->bufBase = 0;
++}
++
++#define RangeEnc_GetProcessed(p) ((p)->processed + ((p)->buf - (p)->bufBase) + (p)->cacheSize)
++
++#define RC_BUF_SIZE (1 << 16)
++static int RangeEnc_Alloc(CRangeEnc *p, ISzAlloc *alloc)
++{
++  if (p->bufBase == 0)
++  {
++    p->bufBase = (Byte *)alloc->Alloc(alloc, RC_BUF_SIZE);
++    if (p->bufBase == 0)
++      return 0;
++    p->bufLim = p->bufBase + RC_BUF_SIZE;
++  }
++  return 1;
++}
++
++static void RangeEnc_Free(CRangeEnc *p, ISzAlloc *alloc)
++{
++  alloc->Free(alloc, p->bufBase);
++  p->bufBase = 0;
++}
++
++static void RangeEnc_Init(CRangeEnc *p)
++{
++  /* Stream.Init(); */
++  p->low = 0;
++  p->range = 0xFFFFFFFF;
++  p->cacheSize = 1;
++  p->cache = 0;
++
++  p->buf = p->bufBase;
++
++  p->processed = 0;
++  p->res = SZ_OK;
++}
++
++static void RangeEnc_FlushStream(CRangeEnc *p)
++{
++  size_t num;
++  if (p->res != SZ_OK)
++    return;
++  num = p->buf - p->bufBase;
++  if (num != p->outStream->Write(p->outStream, p->bufBase, num))
++    p->res = SZ_ERROR_WRITE;
++  p->processed += num;
++  p->buf = p->bufBase;
++}
++
++static void MY_FAST_CALL RangeEnc_ShiftLow(CRangeEnc *p)
++{
++  if ((UInt32)p->low < (UInt32)0xFF000000 || (int)(p->low >> 32) != 0)
++  {
++    Byte temp = p->cache;
++    do
++    {
++      Byte *buf = p->buf;
++      *buf++ = (Byte)(temp + (Byte)(p->low >> 32));
++      p->buf = buf;
++      if (buf == p->bufLim)
++        RangeEnc_FlushStream(p);
++      temp = 0xFF;
++    }
++    while (--p->cacheSize != 0);
++    p->cache = (Byte)((UInt32)p->low >> 24);
++  }
++  p->cacheSize++;
++  p->low = (UInt32)p->low << 8;
++}
++
++static void RangeEnc_FlushData(CRangeEnc *p)
++{
++  int i;
++  for (i = 0; i < 5; i++)
++    RangeEnc_ShiftLow(p);
++}
++
++static void RangeEnc_EncodeDirectBits(CRangeEnc *p, UInt32 value, int numBits)
++{
++  do
++  {
++    p->range >>= 1;
++    p->low += p->range & (0 - ((value >> --numBits) & 1));
++    if (p->range < kTopValue)
++    {
++      p->range <<= 8;
++      RangeEnc_ShiftLow(p);
++    }
++  }
++  while (numBits != 0);
++}
++
++static void RangeEnc_EncodeBit(CRangeEnc *p, CLzmaProb *prob, UInt32 symbol)
++{
++  UInt32 ttt = *prob;
++  UInt32 newBound = (p->range >> kNumBitModelTotalBits) * ttt;
++  if (symbol == 0)
++  {
++    p->range = newBound;
++    ttt += (kBitModelTotal - ttt) >> kNumMoveBits;
++  }
++  else
++  {
++    p->low += newBound;
++    p->range -= newBound;
++    ttt -= ttt >> kNumMoveBits;
++  }
++  *prob = (CLzmaProb)ttt;
++  if (p->range < kTopValue)
++  {
++    p->range <<= 8;
++    RangeEnc_ShiftLow(p);
++  }
++}
++
++static void LitEnc_Encode(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol)
++{
++  symbol |= 0x100;
++  do
++  {
++    RangeEnc_EncodeBit(p, probs + (symbol >> 8), (symbol >> 7) & 1);
++    symbol <<= 1;
++  }
++  while (symbol < 0x10000);
++}
++
++static void LitEnc_EncodeMatched(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol, UInt32 matchByte)
++{
++  UInt32 offs = 0x100;
++  symbol |= 0x100;
++  do
++  {
++    matchByte <<= 1;
++    RangeEnc_EncodeBit(p, probs + (offs + (matchByte & offs) + (symbol >> 8)), (symbol >> 7) & 1);
++    symbol <<= 1;
++    offs &= ~(matchByte ^ symbol);
++  }
++  while (symbol < 0x10000);
++}
++
++void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
++{
++  UInt32 i;
++  for (i = (1 << kNumMoveReducingBits) / 2; i < kBitModelTotal; i += (1 << kNumMoveReducingBits))
++  {
++    const int kCyclesBits = kNumBitPriceShiftBits;
++    UInt32 w = i;
++    UInt32 bitCount = 0;
++    int j;
++    for (j = 0; j < kCyclesBits; j++)
++    {
++      w = w * w;
++      bitCount <<= 1;
++      while (w >= ((UInt32)1 << 16))
++      {
++        w >>= 1;
++        bitCount++;
++      }
++    }
++    ProbPrices[i >> kNumMoveReducingBits] = ((kNumBitModelTotalBits << kCyclesBits) - 15 - bitCount);
++  }
++}
++
++
++#define GET_PRICE(prob, symbol) \
++  p->ProbPrices[((prob) ^ (((-(int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits];
++
++#define GET_PRICEa(prob, symbol) \
++  ProbPrices[((prob) ^ ((-((int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits];
++
++#define GET_PRICE_0(prob) p->ProbPrices[(prob) >> kNumMoveReducingBits]
++#define GET_PRICE_1(prob) p->ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits]
++
++#define GET_PRICE_0a(prob) ProbPrices[(prob) >> kNumMoveReducingBits]
++#define GET_PRICE_1a(prob) ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits]
++
++static UInt32 LitEnc_GetPrice(const CLzmaProb *probs, UInt32 symbol, UInt32 *ProbPrices)
++{
++  UInt32 price = 0;
++  symbol |= 0x100;
++  do
++  {
++    price += GET_PRICEa(probs[symbol >> 8], (symbol >> 7) & 1);
++    symbol <<= 1;
++  }
++  while (symbol < 0x10000);
++  return price;
++}
++
++static UInt32 LitEnc_GetPriceMatched(const CLzmaProb *probs, UInt32 symbol, UInt32 matchByte, UInt32 *ProbPrices)
++{
++  UInt32 price = 0;
++  UInt32 offs = 0x100;
++  symbol |= 0x100;
++  do
++  {
++    matchByte <<= 1;
++    price += GET_PRICEa(probs[offs + (matchByte & offs) + (symbol >> 8)], (symbol >> 7) & 1);
++    symbol <<= 1;
++    offs &= ~(matchByte ^ symbol);
++  }
++  while (symbol < 0x10000);
++  return price;
++}
++
++
++static void RcTree_Encode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol)
++{
++  UInt32 m = 1;
++  int i;
++  for (i = numBitLevels; i != 0;)
++  {
++    UInt32 bit;
++    i--;
++    bit = (symbol >> i) & 1;
++    RangeEnc_EncodeBit(rc, probs + m, bit);
++    m = (m << 1) | bit;
++  }
++}
++
++static void RcTree_ReverseEncode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol)
++{
++  UInt32 m = 1;
++  int i;
++  for (i = 0; i < numBitLevels; i++)
++  {
++    UInt32 bit = symbol & 1;
++    RangeEnc_EncodeBit(rc, probs + m, bit);
++    m = (m << 1) | bit;
++    symbol >>= 1;
++  }
++}
++
++static UInt32 RcTree_GetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices)
++{
++  UInt32 price = 0;
++  symbol |= (1 << numBitLevels);
++  while (symbol != 1)
++  {
++    price += GET_PRICEa(probs[symbol >> 1], symbol & 1);
++    symbol >>= 1;
++  }
++  return price;
++}
++
++static UInt32 RcTree_ReverseGetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices)
++{
++  UInt32 price = 0;
++  UInt32 m = 1;
++  int i;
++  for (i = numBitLevels; i != 0; i--)
++  {
++    UInt32 bit = symbol & 1;
++    symbol >>= 1;
++    price += GET_PRICEa(probs[m], bit);
++    m = (m << 1) | bit;
++  }
++  return price;
++}
++
++
++static void LenEnc_Init(CLenEnc *p)
++{
++  unsigned i;
++  p->choice = p->choice2 = kProbInitValue;
++  for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumLowBits); i++)
++    p->low[i] = kProbInitValue;
++  for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumMidBits); i++)
++    p->mid[i] = kProbInitValue;
++  for (i = 0; i < kLenNumHighSymbols; i++)
++    p->high[i] = kProbInitValue;
++}
++
++static void LenEnc_Encode(CLenEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState)
++{
++  if (symbol < kLenNumLowSymbols)
++  {
++    RangeEnc_EncodeBit(rc, &p->choice, 0);
++    RcTree_Encode(rc, p->low + (posState << kLenNumLowBits), kLenNumLowBits, symbol);
++  }
++  else
++  {
++    RangeEnc_EncodeBit(rc, &p->choice, 1);
++    if (symbol < kLenNumLowSymbols + kLenNumMidSymbols)
++    {
++      RangeEnc_EncodeBit(rc, &p->choice2, 0);
++      RcTree_Encode(rc, p->mid + (posState << kLenNumMidBits), kLenNumMidBits, symbol - kLenNumLowSymbols);
++    }
++    else
++    {
++      RangeEnc_EncodeBit(rc, &p->choice2, 1);
++      RcTree_Encode(rc, p->high, kLenNumHighBits, symbol - kLenNumLowSymbols - kLenNumMidSymbols);
++    }
++  }
++}
++
++static void LenEnc_SetPrices(CLenEnc *p, UInt32 posState, UInt32 numSymbols, UInt32 *prices, UInt32 *ProbPrices)
++{
++  UInt32 a0 = GET_PRICE_0a(p->choice);
++  UInt32 a1 = GET_PRICE_1a(p->choice);
++  UInt32 b0 = a1 + GET_PRICE_0a(p->choice2);
++  UInt32 b1 = a1 + GET_PRICE_1a(p->choice2);
++  UInt32 i = 0;
++  for (i = 0; i < kLenNumLowSymbols; i++)
++  {
++    if (i >= numSymbols)
++      return;
++    prices[i] = a0 + RcTree_GetPrice(p->low + (posState << kLenNumLowBits), kLenNumLowBits, i, ProbPrices);
++  }
++  for (; i < kLenNumLowSymbols + kLenNumMidSymbols; i++)
++  {
++    if (i >= numSymbols)
++      return;
++    prices[i] = b0 + RcTree_GetPrice(p->mid + (posState << kLenNumMidBits), kLenNumMidBits, i - kLenNumLowSymbols, ProbPrices);
++  }
++  for (; i < numSymbols; i++)
++    prices[i] = b1 + RcTree_GetPrice(p->high, kLenNumHighBits, i - kLenNumLowSymbols - kLenNumMidSymbols, ProbPrices);
++}
++
++static void MY_FAST_CALL LenPriceEnc_UpdateTable(CLenPriceEnc *p, UInt32 posState, UInt32 *ProbPrices)
++{
++  LenEnc_SetPrices(&p->p, posState, p->tableSize, p->prices[posState], ProbPrices);
++  p->counters[posState] = p->tableSize;
++}
++
++static void LenPriceEnc_UpdateTables(CLenPriceEnc *p, UInt32 numPosStates, UInt32 *ProbPrices)
++{
++  UInt32 posState;
++  for (posState = 0; posState < numPosStates; posState++)
++    LenPriceEnc_UpdateTable(p, posState, ProbPrices);
++}
++
++static void LenEnc_Encode2(CLenPriceEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState, Bool updatePrice, UInt32 *ProbPrices)
++{
++  LenEnc_Encode(&p->p, rc, symbol, posState);
++  if (updatePrice)
++    if (--p->counters[posState] == 0)
++      LenPriceEnc_UpdateTable(p, posState, ProbPrices);
++}
++
++
++
++
++static void MovePos(CLzmaEnc *p, UInt32 num)
++{
++  #ifdef SHOW_STAT
++  ttt += num;
++  printf("\n MovePos %d", num);
++  #endif
++  if (num != 0)
++  {
++    p->additionalOffset += num;
++    p->matchFinder.Skip(p->matchFinderObj, num);
++  }
++}
++
++static UInt32 ReadMatchDistances(CLzmaEnc *p, UInt32 *numDistancePairsRes)
++{
++  UInt32 lenRes = 0, numPairs;
++  p->numAvail = p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
++  numPairs = p->matchFinder.GetMatches(p->matchFinderObj, p->matches);
++  #ifdef SHOW_STAT
++  printf("\n i = %d numPairs = %d    ", ttt, numPairs / 2);
++  ttt++;
++  {
++    UInt32 i;
++    for (i = 0; i < numPairs; i += 2)
++      printf("%2d %6d   | ", p->matches[i], p->matches[i + 1]);
++  }
++  #endif
++  if (numPairs > 0)
++  {
++    lenRes = p->matches[numPairs - 2];
++    if (lenRes == p->numFastBytes)
++    {
++      const Byte *pby = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
++      UInt32 distance = p->matches[numPairs - 1] + 1;
++      UInt32 numAvail = p->numAvail;
++      if (numAvail > LZMA_MATCH_LEN_MAX)
++        numAvail = LZMA_MATCH_LEN_MAX;
++      {
++        const Byte *pby2 = pby - distance;
++        for (; lenRes < numAvail && pby[lenRes] == pby2[lenRes]; lenRes++);
++      }
++    }
++  }
++  p->additionalOffset++;
++  *numDistancePairsRes = numPairs;
++  return lenRes;
++}
++
++
++#define MakeAsChar(p) (p)->backPrev = (UInt32)(-1); (p)->prev1IsChar = False;
++#define MakeAsShortRep(p) (p)->backPrev = 0; (p)->prev1IsChar = False;
++#define IsShortRep(p) ((p)->backPrev == 0)
++
++static UInt32 GetRepLen1Price(CLzmaEnc *p, UInt32 state, UInt32 posState)
++{
++  return
++    GET_PRICE_0(p->isRepG0[state]) +
++    GET_PRICE_0(p->isRep0Long[state][posState]);
++}
++
++static UInt32 GetPureRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 state, UInt32 posState)
++{
++  UInt32 price;
++  if (repIndex == 0)
++  {
++    price = GET_PRICE_0(p->isRepG0[state]);
++    price += GET_PRICE_1(p->isRep0Long[state][posState]);
++  }
++  else
++  {
++    price = GET_PRICE_1(p->isRepG0[state]);
++    if (repIndex == 1)
++      price += GET_PRICE_0(p->isRepG1[state]);
++    else
++    {
++      price += GET_PRICE_1(p->isRepG1[state]);
++      price += GET_PRICE(p->isRepG2[state], repIndex - 2);
++    }
++  }
++  return price;
++}
++
++static UInt32 GetRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 len, UInt32 state, UInt32 posState)
++{
++  return p->repLenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN] +
++    GetPureRepPrice(p, repIndex, state, posState);
++}
++
++static UInt32 Backward(CLzmaEnc *p, UInt32 *backRes, UInt32 cur)
++{
++  UInt32 posMem = p->opt[cur].posPrev;
++  UInt32 backMem = p->opt[cur].backPrev;
++  p->optimumEndIndex = cur;
++  do
++  {
++    if (p->opt[cur].prev1IsChar)
++    {
++      MakeAsChar(&p->opt[posMem])
++      p->opt[posMem].posPrev = posMem - 1;
++      if (p->opt[cur].prev2)
++      {
++        p->opt[posMem - 1].prev1IsChar = False;
++        p->opt[posMem - 1].posPrev = p->opt[cur].posPrev2;
++        p->opt[posMem - 1].backPrev = p->opt[cur].backPrev2;
++      }
++    }
++    {
++      UInt32 posPrev = posMem;
++      UInt32 backCur = backMem;
++      
++      backMem = p->opt[posPrev].backPrev;
++      posMem = p->opt[posPrev].posPrev;
++      
++      p->opt[posPrev].backPrev = backCur;
++      p->opt[posPrev].posPrev = cur;
++      cur = posPrev;
++    }
++  }
++  while (cur != 0);
++  *backRes = p->opt[0].backPrev;
++  p->optimumCurrentIndex  = p->opt[0].posPrev;
++  return p->optimumCurrentIndex;
++}
++
++#define LIT_PROBS(pos, prevByte) (p->litProbs + ((((pos) & p->lpMask) << p->lc) + ((prevByte) >> (8 - p->lc))) * 0x300)
++
++static UInt32 GetOptimum(CLzmaEnc *p, UInt32 position, UInt32 *backRes)
++{
++  UInt32 numAvail, mainLen, numPairs, repMaxIndex, i, posState, lenEnd, len, cur;
++  UInt32 matchPrice, repMatchPrice, normalMatchPrice;
++  UInt32 reps[LZMA_NUM_REPS], repLens[LZMA_NUM_REPS];
++  UInt32 *matches;
++  const Byte *data;
++  Byte curByte, matchByte;
++  if (p->optimumEndIndex != p->optimumCurrentIndex)
++  {
++    const COptimal *opt = &p->opt[p->optimumCurrentIndex];
++    UInt32 lenRes = opt->posPrev - p->optimumCurrentIndex;
++    *backRes = opt->backPrev;
++    p->optimumCurrentIndex = opt->posPrev;
++    return lenRes;
++  }
++  p->optimumCurrentIndex = p->optimumEndIndex = 0;
++  
++  if (p->additionalOffset == 0)
++    mainLen = ReadMatchDistances(p, &numPairs);
++  else
++  {
++    mainLen = p->longestMatchLength;
++    numPairs = p->numPairs;
++  }
++
++  numAvail = p->numAvail;
++  if (numAvail < 2)
++  {
++    *backRes = (UInt32)(-1);
++    return 1;
++  }
++  if (numAvail > LZMA_MATCH_LEN_MAX)
++    numAvail = LZMA_MATCH_LEN_MAX;
++
++  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
++  repMaxIndex = 0;
++  for (i = 0; i < LZMA_NUM_REPS; i++)
++  {
++    UInt32 lenTest;
++    const Byte *data2;
++    reps[i] = p->reps[i];
++    data2 = data - (reps[i] + 1);
++    if (data[0] != data2[0] || data[1] != data2[1])
++    {
++      repLens[i] = 0;
++      continue;
++    }
++    for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++);
++    repLens[i] = lenTest;
++    if (lenTest > repLens[repMaxIndex])
++      repMaxIndex = i;
++  }
++  if (repLens[repMaxIndex] >= p->numFastBytes)
++  {
++    UInt32 lenRes;
++    *backRes = repMaxIndex;
++    lenRes = repLens[repMaxIndex];
++    MovePos(p, lenRes - 1);
++    return lenRes;
++  }
++
++  matches = p->matches;
++  if (mainLen >= p->numFastBytes)
++  {
++    *backRes = matches[numPairs - 1] + LZMA_NUM_REPS;
++    MovePos(p, mainLen - 1);
++    return mainLen;
++  }
++  curByte = *data;
++  matchByte = *(data - (reps[0] + 1));
++
++  if (mainLen < 2 && curByte != matchByte && repLens[repMaxIndex] < 2)
++  {
++    *backRes = (UInt32)-1;
++    return 1;
++  }
++
++  p->opt[0].state = (CState)p->state;
++
++  posState = (position & p->pbMask);
++
++  {
++    const CLzmaProb *probs = LIT_PROBS(position, *(data - 1));
++    p->opt[1].price = GET_PRICE_0(p->isMatch[p->state][posState]) +
++        (!IsCharState(p->state) ?
++          LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) :
++          LitEnc_GetPrice(probs, curByte, p->ProbPrices));
++  }
++
++  MakeAsChar(&p->opt[1]);
++
++  matchPrice = GET_PRICE_1(p->isMatch[p->state][posState]);
++  repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[p->state]);
++
++  if (matchByte == curByte)
++  {
++    UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, p->state, posState);
++    if (shortRepPrice < p->opt[1].price)
++    {
++      p->opt[1].price = shortRepPrice;
++      MakeAsShortRep(&p->opt[1]);
++    }
++  }
++  lenEnd = ((mainLen >= repLens[repMaxIndex]) ? mainLen : repLens[repMaxIndex]);
++
++  if (lenEnd < 2)
++  {
++    *backRes = p->opt[1].backPrev;
++    return 1;
++  }
++
++  p->opt[1].posPrev = 0;
++  for (i = 0; i < LZMA_NUM_REPS; i++)
++    p->opt[0].backs[i] = reps[i];
++
++  len = lenEnd;
++  do
++    p->opt[len--].price = kInfinityPrice;
++  while (len >= 2);
++
++  for (i = 0; i < LZMA_NUM_REPS; i++)
++  {
++    UInt32 repLen = repLens[i];
++    UInt32 price;
++    if (repLen < 2)
++      continue;
++    price = repMatchPrice + GetPureRepPrice(p, i, p->state, posState);
++    do
++    {
++      UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][repLen - 2];
++      COptimal *opt = &p->opt[repLen];
++      if (curAndLenPrice < opt->price)
++      {
++        opt->price = curAndLenPrice;
++        opt->posPrev = 0;
++        opt->backPrev = i;
++        opt->prev1IsChar = False;
++      }
++    }
++    while (--repLen >= 2);
++  }
++
++  normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[p->state]);
++
++  len = ((repLens[0] >= 2) ? repLens[0] + 1 : 2);
++  if (len <= mainLen)
++  {
++    UInt32 offs = 0;
++    while (len > matches[offs])
++      offs += 2;
++    for (; ; len++)
++    {
++      COptimal *opt;
++      UInt32 distance = matches[offs + 1];
++
++      UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN];
++      UInt32 lenToPosState = GetLenToPosState(len);
++      if (distance < kNumFullDistances)
++        curAndLenPrice += p->distancesPrices[lenToPosState][distance];
++      else
++      {
++        UInt32 slot;
++        GetPosSlot2(distance, slot);
++        curAndLenPrice += p->alignPrices[distance & kAlignMask] + p->posSlotPrices[lenToPosState][slot];
++      }
++      opt = &p->opt[len];
++      if (curAndLenPrice < opt->price)
++      {
++        opt->price = curAndLenPrice;
++        opt->posPrev = 0;
++        opt->backPrev = distance + LZMA_NUM_REPS;
++        opt->prev1IsChar = False;
++      }
++      if (len == matches[offs])
++      {
++        offs += 2;
++        if (offs == numPairs)
++          break;
++      }
++    }
++  }
++
++  cur = 0;
++
++    #ifdef SHOW_STAT2
++    if (position >= 0)
++    {
++      unsigned i;
++      printf("\n pos = %4X", position);
++      for (i = cur; i <= lenEnd; i++)
++      printf("\nprice[%4X] = %d", position - cur + i, p->opt[i].price);
++    }
++    #endif
++
++  for (;;)
++  {
++    UInt32 numAvailFull, newLen, numPairs, posPrev, state, posState, startLen;
++    UInt32 curPrice, curAnd1Price, matchPrice, repMatchPrice;
++    Bool nextIsChar;
++    Byte curByte, matchByte;
++    const Byte *data;
++    COptimal *curOpt;
++    COptimal *nextOpt;
++
++    cur++;
++    if (cur == lenEnd)
++      return Backward(p, backRes, cur);
++
++    newLen = ReadMatchDistances(p, &numPairs);
++    if (newLen >= p->numFastBytes)
++    {
++      p->numPairs = numPairs;
++      p->longestMatchLength = newLen;
++      return Backward(p, backRes, cur);
++    }
++    position++;
++    curOpt = &p->opt[cur];
++    posPrev = curOpt->posPrev;
++    if (curOpt->prev1IsChar)
++    {
++      posPrev--;
++      if (curOpt->prev2)
++      {
++        state = p->opt[curOpt->posPrev2].state;
++        if (curOpt->backPrev2 < LZMA_NUM_REPS)
++          state = kRepNextStates[state];
++        else
++          state = kMatchNextStates[state];
++      }
++      else
++        state = p->opt[posPrev].state;
++      state = kLiteralNextStates[state];
++    }
++    else
++      state = p->opt[posPrev].state;
++    if (posPrev == cur - 1)
++    {
++      if (IsShortRep(curOpt))
++        state = kShortRepNextStates[state];
++      else
++        state = kLiteralNextStates[state];
++    }
++    else
++    {
++      UInt32 pos;
++      const COptimal *prevOpt;
++      if (curOpt->prev1IsChar && curOpt->prev2)
++      {
++        posPrev = curOpt->posPrev2;
++        pos = curOpt->backPrev2;
++        state = kRepNextStates[state];
++      }
++      else
++      {
++        pos = curOpt->backPrev;
++        if (pos < LZMA_NUM_REPS)
++          state = kRepNextStates[state];
++        else
++          state = kMatchNextStates[state];
++      }
++      prevOpt = &p->opt[posPrev];
++      if (pos < LZMA_NUM_REPS)
++      {
++        UInt32 i;
++        reps[0] = prevOpt->backs[pos];
++        for (i = 1; i <= pos; i++)
++          reps[i] = prevOpt->backs[i - 1];
++        for (; i < LZMA_NUM_REPS; i++)
++          reps[i] = prevOpt->backs[i];
++      }
++      else
++      {
++        UInt32 i;
++        reps[0] = (pos - LZMA_NUM_REPS);
++        for (i = 1; i < LZMA_NUM_REPS; i++)
++          reps[i] = prevOpt->backs[i - 1];
++      }
++    }
++    curOpt->state = (CState)state;
++
++    curOpt->backs[0] = reps[0];
++    curOpt->backs[1] = reps[1];
++    curOpt->backs[2] = reps[2];
++    curOpt->backs[3] = reps[3];
++
++    curPrice = curOpt->price;
++    nextIsChar = False;
++    data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
++    curByte = *data;
++    matchByte = *(data - (reps[0] + 1));
++
++    posState = (position & p->pbMask);
++
++    curAnd1Price = curPrice + GET_PRICE_0(p->isMatch[state][posState]);
++    {
++      const CLzmaProb *probs = LIT_PROBS(position, *(data - 1));
++      curAnd1Price +=
++        (!IsCharState(state) ?
++          LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) :
++          LitEnc_GetPrice(probs, curByte, p->ProbPrices));
++    }
++
++    nextOpt = &p->opt[cur + 1];
++
++    if (curAnd1Price < nextOpt->price)
++    {
++      nextOpt->price = curAnd1Price;
++      nextOpt->posPrev = cur;
++      MakeAsChar(nextOpt);
++      nextIsChar = True;
++    }
++
++    matchPrice = curPrice + GET_PRICE_1(p->isMatch[state][posState]);
++    repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[state]);
++    
++    if (matchByte == curByte && !(nextOpt->posPrev < cur && nextOpt->backPrev == 0))
++    {
++      UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, state, posState);
++      if (shortRepPrice <= nextOpt->price)
++      {
++        nextOpt->price = shortRepPrice;
++        nextOpt->posPrev = cur;
++        MakeAsShortRep(nextOpt);
++        nextIsChar = True;
++      }
++    }
++    numAvailFull = p->numAvail;
++    {
++      UInt32 temp = kNumOpts - 1 - cur;
++      if (temp < numAvailFull)
++        numAvailFull = temp;
++    }
++
++    if (numAvailFull < 2)
++      continue;
++    numAvail = (numAvailFull <= p->numFastBytes ? numAvailFull : p->numFastBytes);
++
++    if (!nextIsChar && matchByte != curByte) /* speed optimization */
++    {
++      /* try Literal + rep0 */
++      UInt32 temp;
++      UInt32 lenTest2;
++      const Byte *data2 = data - (reps[0] + 1);
++      UInt32 limit = p->numFastBytes + 1;
++      if (limit > numAvailFull)
++        limit = numAvailFull;
++
++      for (temp = 1; temp < limit && data[temp] == data2[temp]; temp++);
++      lenTest2 = temp - 1;
++      if (lenTest2 >= 2)
++      {
++        UInt32 state2 = kLiteralNextStates[state];
++        UInt32 posStateNext = (position + 1) & p->pbMask;
++        UInt32 nextRepMatchPrice = curAnd1Price +
++            GET_PRICE_1(p->isMatch[state2][posStateNext]) +
++            GET_PRICE_1(p->isRep[state2]);
++        /* for (; lenTest2 >= 2; lenTest2--) */
++        {
++          UInt32 curAndLenPrice;
++          COptimal *opt;
++          UInt32 offset = cur + 1 + lenTest2;
++          while (lenEnd < offset)
++            p->opt[++lenEnd].price = kInfinityPrice;
++          curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
++          opt = &p->opt[offset];
++          if (curAndLenPrice < opt->price)
++          {
++            opt->price = curAndLenPrice;
++            opt->posPrev = cur + 1;
++            opt->backPrev = 0;
++            opt->prev1IsChar = True;
++            opt->prev2 = False;
++          }
++        }
++      }
++    }
++    
++    startLen = 2; /* speed optimization */
++    {
++    UInt32 repIndex;
++    for (repIndex = 0; repIndex < LZMA_NUM_REPS; repIndex++)
++    {
++      UInt32 lenTest;
++      UInt32 lenTestTemp;
++      UInt32 price;
++      const Byte *data2 = data - (reps[repIndex] + 1);
++      if (data[0] != data2[0] || data[1] != data2[1])
++        continue;
++      for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++);
++      while (lenEnd < cur + lenTest)
++        p->opt[++lenEnd].price = kInfinityPrice;
++      lenTestTemp = lenTest;
++      price = repMatchPrice + GetPureRepPrice(p, repIndex, state, posState);
++      do
++      {
++        UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][lenTest - 2];
++        COptimal *opt = &p->opt[cur + lenTest];
++        if (curAndLenPrice < opt->price)
++        {
++          opt->price = curAndLenPrice;
++          opt->posPrev = cur;
++          opt->backPrev = repIndex;
++          opt->prev1IsChar = False;
++        }
++      }
++      while (--lenTest >= 2);
++      lenTest = lenTestTemp;
++      
++      if (repIndex == 0)
++        startLen = lenTest + 1;
++        
++      /* if (_maxMode) */
++        {
++          UInt32 lenTest2 = lenTest + 1;
++          UInt32 limit = lenTest2 + p->numFastBytes;
++          UInt32 nextRepMatchPrice;
++          if (limit > numAvailFull)
++            limit = numAvailFull;
++          for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++);
++          lenTest2 -= lenTest + 1;
++          if (lenTest2 >= 2)
++          {
++            UInt32 state2 = kRepNextStates[state];
++            UInt32 posStateNext = (position + lenTest) & p->pbMask;
++            UInt32 curAndLenCharPrice =
++                price + p->repLenEnc.prices[posState][lenTest - 2] +
++                GET_PRICE_0(p->isMatch[state2][posStateNext]) +
++                LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]),
++                    data[lenTest], data2[lenTest], p->ProbPrices);
++            state2 = kLiteralNextStates[state2];
++            posStateNext = (position + lenTest + 1) & p->pbMask;
++            nextRepMatchPrice = curAndLenCharPrice +
++                GET_PRICE_1(p->isMatch[state2][posStateNext]) +
++                GET_PRICE_1(p->isRep[state2]);
++            
++            /* for (; lenTest2 >= 2; lenTest2--) */
++            {
++              UInt32 curAndLenPrice;
++              COptimal *opt;
++              UInt32 offset = cur + lenTest + 1 + lenTest2;
++              while (lenEnd < offset)
++                p->opt[++lenEnd].price = kInfinityPrice;
++              curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
++              opt = &p->opt[offset];
++              if (curAndLenPrice < opt->price)
++              {
++                opt->price = curAndLenPrice;
++                opt->posPrev = cur + lenTest + 1;
++                opt->backPrev = 0;
++                opt->prev1IsChar = True;
++                opt->prev2 = True;
++                opt->posPrev2 = cur;
++                opt->backPrev2 = repIndex;
++              }
++            }
++          }
++        }
++    }
++    }
++    /* for (UInt32 lenTest = 2; lenTest <= newLen; lenTest++) */
++    if (newLen > numAvail)
++    {
++      newLen = numAvail;
++      for (numPairs = 0; newLen > matches[numPairs]; numPairs += 2);
++      matches[numPairs] = newLen;
++      numPairs += 2;
++    }
++    if (newLen >= startLen)
++    {
++      UInt32 normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[state]);
++      UInt32 offs, curBack, posSlot;
++      UInt32 lenTest;
++      while (lenEnd < cur + newLen)
++        p->opt[++lenEnd].price = kInfinityPrice;
++
++      offs = 0;
++      while (startLen > matches[offs])
++        offs += 2;
++      curBack = matches[offs + 1];
++      GetPosSlot2(curBack, posSlot);
++      for (lenTest = /*2*/ startLen; ; lenTest++)
++      {
++        UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][lenTest - LZMA_MATCH_LEN_MIN];
++        UInt32 lenToPosState = GetLenToPosState(lenTest);
++        COptimal *opt;
++        if (curBack < kNumFullDistances)
++          curAndLenPrice += p->distancesPrices[lenToPosState][curBack];
++        else
++          curAndLenPrice += p->posSlotPrices[lenToPosState][posSlot] + p->alignPrices[curBack & kAlignMask];
++        
++        opt = &p->opt[cur + lenTest];
++        if (curAndLenPrice < opt->price)
++        {
++          opt->price = curAndLenPrice;
++          opt->posPrev = cur;
++          opt->backPrev = curBack + LZMA_NUM_REPS;
++          opt->prev1IsChar = False;
++        }
++
++        if (/*_maxMode && */lenTest == matches[offs])
++        {
++          /* Try Match + Literal + Rep0 */
++          const Byte *data2 = data - (curBack + 1);
++          UInt32 lenTest2 = lenTest + 1;
++          UInt32 limit = lenTest2 + p->numFastBytes;
++          UInt32 nextRepMatchPrice;
++          if (limit > numAvailFull)
++            limit = numAvailFull;
++          for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++);
++          lenTest2 -= lenTest + 1;
++          if (lenTest2 >= 2)
++          {
++            UInt32 state2 = kMatchNextStates[state];
++            UInt32 posStateNext = (position + lenTest) & p->pbMask;
++            UInt32 curAndLenCharPrice = curAndLenPrice +
++                GET_PRICE_0(p->isMatch[state2][posStateNext]) +
++                LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]),
++                    data[lenTest], data2[lenTest], p->ProbPrices);
++            state2 = kLiteralNextStates[state2];
++            posStateNext = (posStateNext + 1) & p->pbMask;
++            nextRepMatchPrice = curAndLenCharPrice +
++                GET_PRICE_1(p->isMatch[state2][posStateNext]) +
++                GET_PRICE_1(p->isRep[state2]);
++            
++            /* for (; lenTest2 >= 2; lenTest2--) */
++            {
++              UInt32 offset = cur + lenTest + 1 + lenTest2;
++              UInt32 curAndLenPrice;
++              COptimal *opt;
++              while (lenEnd < offset)
++                p->opt[++lenEnd].price = kInfinityPrice;
++              curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
++              opt = &p->opt[offset];
++              if (curAndLenPrice < opt->price)
++              {
++                opt->price = curAndLenPrice;
++                opt->posPrev = cur + lenTest + 1;
++                opt->backPrev = 0;
++                opt->prev1IsChar = True;
++                opt->prev2 = True;
++                opt->posPrev2 = cur;
++                opt->backPrev2 = curBack + LZMA_NUM_REPS;
++              }
++            }
++          }
++          offs += 2;
++          if (offs == numPairs)
++            break;
++          curBack = matches[offs + 1];
++          if (curBack >= kNumFullDistances)
++            GetPosSlot2(curBack, posSlot);
++        }
++      }
++    }
++  }
++}
++
++#define ChangePair(smallDist, bigDist) (((bigDist) >> 7) > (smallDist))
++
++static UInt32 GetOptimumFast(CLzmaEnc *p, UInt32 *backRes)
++{
++  UInt32 numAvail, mainLen, mainDist, numPairs, repIndex, repLen, i;
++  const Byte *data;
++  const UInt32 *matches;
++
++  if (p->additionalOffset == 0)
++    mainLen = ReadMatchDistances(p, &numPairs);
++  else
++  {
++    mainLen = p->longestMatchLength;
++    numPairs = p->numPairs;
++  }
++
++  numAvail = p->numAvail;
++  *backRes = (UInt32)-1;
++  if (numAvail < 2)
++    return 1;
++  if (numAvail > LZMA_MATCH_LEN_MAX)
++    numAvail = LZMA_MATCH_LEN_MAX;
++  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
++
++  repLen = repIndex = 0;
++  for (i = 0; i < LZMA_NUM_REPS; i++)
++  {
++    UInt32 len;
++    const Byte *data2 = data - (p->reps[i] + 1);
++    if (data[0] != data2[0] || data[1] != data2[1])
++      continue;
++    for (len = 2; len < numAvail && data[len] == data2[len]; len++);
++    if (len >= p->numFastBytes)
++    {
++      *backRes = i;
++      MovePos(p, len - 1);
++      return len;
++    }
++    if (len > repLen)
++    {
++      repIndex = i;
++      repLen = len;
++    }
++  }
++
++  matches = p->matches;
++  if (mainLen >= p->numFastBytes)
++  {
++    *backRes = matches[numPairs - 1] + LZMA_NUM_REPS;
++    MovePos(p, mainLen - 1);
++    return mainLen;
++  }
++
++  mainDist = 0; /* for GCC */
++  if (mainLen >= 2)
++  {
++    mainDist = matches[numPairs - 1];
++    while (numPairs > 2 && mainLen == matches[numPairs - 4] + 1)
++    {
++      if (!ChangePair(matches[numPairs - 3], mainDist))
++        break;
++      numPairs -= 2;
++      mainLen = matches[numPairs - 2];
++      mainDist = matches[numPairs - 1];
++    }
++    if (mainLen == 2 && mainDist >= 0x80)
++      mainLen = 1;
++  }
++
++  if (repLen >= 2 && (
++        (repLen + 1 >= mainLen) ||
++        (repLen + 2 >= mainLen && mainDist >= (1 << 9)) ||
++        (repLen + 3 >= mainLen && mainDist >= (1 << 15))))
++  {
++    *backRes = repIndex;
++    MovePos(p, repLen - 1);
++    return repLen;
++  }
++  
++  if (mainLen < 2 || numAvail <= 2)
++    return 1;
++
++  p->longestMatchLength = ReadMatchDistances(p, &p->numPairs);
++  if (p->longestMatchLength >= 2)
++  {
++    UInt32 newDistance = matches[p->numPairs - 1];
++    if ((p->longestMatchLength >= mainLen && newDistance < mainDist) ||
++        (p->longestMatchLength == mainLen + 1 && !ChangePair(mainDist, newDistance)) ||
++        (p->longestMatchLength > mainLen + 1) ||
++        (p->longestMatchLength + 1 >= mainLen && mainLen >= 3 && ChangePair(newDistance, mainDist)))
++      return 1;
++  }
++  
++  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
++  for (i = 0; i < LZMA_NUM_REPS; i++)
++  {
++    UInt32 len, limit;
++    const Byte *data2 = data - (p->reps[i] + 1);
++    if (data[0] != data2[0] || data[1] != data2[1])
++      continue;
++    limit = mainLen - 1;
++    for (len = 2; len < limit && data[len] == data2[len]; len++);
++    if (len >= limit)
++      return 1;
++  }
++  *backRes = mainDist + LZMA_NUM_REPS;
++  MovePos(p, mainLen - 2);
++  return mainLen;
++}
++
++static void WriteEndMarker(CLzmaEnc *p, UInt32 posState)
++{
++  UInt32 len;
++  RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1);
++  RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0);
++  p->state = kMatchNextStates[p->state];
++  len = LZMA_MATCH_LEN_MIN;
++  LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
++  RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, (1 << kNumPosSlotBits) - 1);
++  RangeEnc_EncodeDirectBits(&p->rc, (((UInt32)1 << 30) - 1) >> kNumAlignBits, 30 - kNumAlignBits);
++  RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, kAlignMask);
++}
++
++static SRes CheckErrors(CLzmaEnc *p)
++{
++  if (p->result != SZ_OK)
++    return p->result;
++  if (p->rc.res != SZ_OK)
++    p->result = SZ_ERROR_WRITE;
++  if (p->matchFinderBase.result != SZ_OK)
++    p->result = SZ_ERROR_READ;
++  if (p->result != SZ_OK)
++    p->finished = True;
++  return p->result;
++}
++
++static SRes Flush(CLzmaEnc *p, UInt32 nowPos)
++{
++  /* ReleaseMFStream(); */
++  p->finished = True;
++  if (p->writeEndMark)
++    WriteEndMarker(p, nowPos & p->pbMask);
++  RangeEnc_FlushData(&p->rc);
++  RangeEnc_FlushStream(&p->rc);
++  return CheckErrors(p);
++}
++
++static void FillAlignPrices(CLzmaEnc *p)
++{
++  UInt32 i;
++  for (i = 0; i < kAlignTableSize; i++)
++    p->alignPrices[i] = RcTree_ReverseGetPrice(p->posAlignEncoder, kNumAlignBits, i, p->ProbPrices);
++  p->alignPriceCount = 0;
++}
++
++static void FillDistancesPrices(CLzmaEnc *p)
++{
++  UInt32 tempPrices[kNumFullDistances];
++  UInt32 i, lenToPosState;
++  for (i = kStartPosModelIndex; i < kNumFullDistances; i++)
++  {
++    UInt32 posSlot = GetPosSlot1(i);
++    UInt32 footerBits = ((posSlot >> 1) - 1);
++    UInt32 base = ((2 | (posSlot & 1)) << footerBits);
++    tempPrices[i] = RcTree_ReverseGetPrice(p->posEncoders + base - posSlot - 1, footerBits, i - base, p->ProbPrices);
++  }
++
++  for (lenToPosState = 0; lenToPosState < kNumLenToPosStates; lenToPosState++)
++  {
++    UInt32 posSlot;
++    const CLzmaProb *encoder = p->posSlotEncoder[lenToPosState];
++    UInt32 *posSlotPrices = p->posSlotPrices[lenToPosState];
++    for (posSlot = 0; posSlot < p->distTableSize; posSlot++)
++      posSlotPrices[posSlot] = RcTree_GetPrice(encoder, kNumPosSlotBits, posSlot, p->ProbPrices);
++    for (posSlot = kEndPosModelIndex; posSlot < p->distTableSize; posSlot++)
++      posSlotPrices[posSlot] += ((((posSlot >> 1) - 1) - kNumAlignBits) << kNumBitPriceShiftBits);
++
++    {
++      UInt32 *distancesPrices = p->distancesPrices[lenToPosState];
++      UInt32 i;
++      for (i = 0; i < kStartPosModelIndex; i++)
++        distancesPrices[i] = posSlotPrices[i];
++      for (; i < kNumFullDistances; i++)
++        distancesPrices[i] = posSlotPrices[GetPosSlot1(i)] + tempPrices[i];
++    }
++  }
++  p->matchPriceCount = 0;
++}
++
++void LzmaEnc_Construct(CLzmaEnc *p)
++{
++  RangeEnc_Construct(&p->rc);
++  MatchFinder_Construct(&p->matchFinderBase);
++  #ifndef _7ZIP_ST
++  MatchFinderMt_Construct(&p->matchFinderMt);
++  p->matchFinderMt.MatchFinder = &p->matchFinderBase;
++  #endif
++
++  {
++    CLzmaEncProps props;
++    LzmaEncProps_Init(&props);
++    LzmaEnc_SetProps(p, &props);
++  }
++
++  #ifndef LZMA_LOG_BSR
++  LzmaEnc_FastPosInit(p->g_FastPos);
++  #endif
++
++  LzmaEnc_InitPriceTables(p->ProbPrices);
++  p->litProbs = 0;
++  p->saveState.litProbs = 0;
++}
++
++CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc)
++{
++  void *p;
++  p = alloc->Alloc(alloc, sizeof(CLzmaEnc));
++  if (p != 0)
++    LzmaEnc_Construct((CLzmaEnc *)p);
++  return p;
++}
++
++void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
++{
++  alloc->Free(alloc, p->litProbs);
++  alloc->Free(alloc, p->saveState.litProbs);
++  p->litProbs = 0;
++  p->saveState.litProbs = 0;
++}
++
++void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  #ifndef _7ZIP_ST
++  MatchFinderMt_Destruct(&p->matchFinderMt, allocBig);
++  #endif
++  MatchFinder_Free(&p->matchFinderBase, allocBig);
++  LzmaEnc_FreeLits(p, alloc);
++  RangeEnc_Free(&p->rc, alloc);
++}
++
++void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  LzmaEnc_Destruct((CLzmaEnc *)p, alloc, allocBig);
++  alloc->Free(alloc, p);
++}
++
++static SRes LzmaEnc_CodeOneBlock(CLzmaEnc *p, Bool useLimits, UInt32 maxPackSize, UInt32 maxUnpackSize)
++{
++  UInt32 nowPos32, startPos32;
++  if (p->needInit)
++  {
++    p->matchFinder.Init(p->matchFinderObj);
++    p->needInit = 0;
++  }
++
++  if (p->finished)
++    return p->result;
++  RINOK(CheckErrors(p));
++
++  nowPos32 = (UInt32)p->nowPos64;
++  startPos32 = nowPos32;
++
++  if (p->nowPos64 == 0)
++  {
++    UInt32 numPairs;
++    Byte curByte;
++    if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0)
++      return Flush(p, nowPos32);
++    ReadMatchDistances(p, &numPairs);
++    RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][0], 0);
++    p->state = kLiteralNextStates[p->state];
++    curByte = p->matchFinder.GetIndexByte(p->matchFinderObj, 0 - p->additionalOffset);
++    LitEnc_Encode(&p->rc, p->litProbs, curByte);
++    p->additionalOffset--;
++    nowPos32++;
++  }
++
++  if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) != 0)
++  for (;;)
++  {
++    UInt32 pos, len, posState;
++
++    if (p->fastMode)
++      len = GetOptimumFast(p, &pos);
++    else
++      len = GetOptimum(p, nowPos32, &pos);
++
++    #ifdef SHOW_STAT2
++    printf("\n pos = %4X,   len = %d   pos = %d", nowPos32, len, pos);
++    #endif
++
++    posState = nowPos32 & p->pbMask;
++    if (len == 1 && pos == (UInt32)-1)
++    {
++      Byte curByte;
++      CLzmaProb *probs;
++      const Byte *data;
++
++      RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 0);
++      data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
++      curByte = *data;
++      probs = LIT_PROBS(nowPos32, *(data - 1));
++      if (IsCharState(p->state))
++        LitEnc_Encode(&p->rc, probs, curByte);
++      else
++        LitEnc_EncodeMatched(&p->rc, probs, curByte, *(data - p->reps[0] - 1));
++      p->state = kLiteralNextStates[p->state];
++    }
++    else
++    {
++      RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1);
++      if (pos < LZMA_NUM_REPS)
++      {
++        RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 1);
++        if (pos == 0)
++        {
++          RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 0);
++          RangeEnc_EncodeBit(&p->rc, &p->isRep0Long[p->state][posState], ((len == 1) ? 0 : 1));
++        }
++        else
++        {
++          UInt32 distance = p->reps[pos];
++          RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 1);
++          if (pos == 1)
++            RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 0);
++          else
++          {
++            RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 1);
++            RangeEnc_EncodeBit(&p->rc, &p->isRepG2[p->state], pos - 2);
++            if (pos == 3)
++              p->reps[3] = p->reps[2];
++            p->reps[2] = p->reps[1];
++          }
++          p->reps[1] = p->reps[0];
++          p->reps[0] = distance;
++        }
++        if (len == 1)
++          p->state = kShortRepNextStates[p->state];
++        else
++        {
++          LenEnc_Encode2(&p->repLenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
++          p->state = kRepNextStates[p->state];
++        }
++      }
++      else
++      {
++        UInt32 posSlot;
++        RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0);
++        p->state = kMatchNextStates[p->state];
++        LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
++        pos -= LZMA_NUM_REPS;
++        GetPosSlot(pos, posSlot);
++        RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, posSlot);
++        
++        if (posSlot >= kStartPosModelIndex)
++        {
++          UInt32 footerBits = ((posSlot >> 1) - 1);
++          UInt32 base = ((2 | (posSlot & 1)) << footerBits);
++          UInt32 posReduced = pos - base;
++
++          if (posSlot < kEndPosModelIndex)
++            RcTree_ReverseEncode(&p->rc, p->posEncoders + base - posSlot - 1, footerBits, posReduced);
++          else
++          {
++            RangeEnc_EncodeDirectBits(&p->rc, posReduced >> kNumAlignBits, footerBits - kNumAlignBits);
++            RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, posReduced & kAlignMask);
++            p->alignPriceCount++;
++          }
++        }
++        p->reps[3] = p->reps[2];
++        p->reps[2] = p->reps[1];
++        p->reps[1] = p->reps[0];
++        p->reps[0] = pos;
++        p->matchPriceCount++;
++      }
++    }
++    p->additionalOffset -= len;
++    nowPos32 += len;
++    if (p->additionalOffset == 0)
++    {
++      UInt32 processed;
++      if (!p->fastMode)
++      {
++        if (p->matchPriceCount >= (1 << 7))
++          FillDistancesPrices(p);
++        if (p->alignPriceCount >= kAlignTableSize)
++          FillAlignPrices(p);
++      }
++      if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0)
++        break;
++      processed = nowPos32 - startPos32;
++      if (useLimits)
++      {
++        if (processed + kNumOpts + 300 >= maxUnpackSize ||
++            RangeEnc_GetProcessed(&p->rc) + kNumOpts * 2 >= maxPackSize)
++          break;
++      }
++      else if (processed >= (1 << 15))
++      {
++        p->nowPos64 += nowPos32 - startPos32;
++        return CheckErrors(p);
++      }
++    }
++  }
++  p->nowPos64 += nowPos32 - startPos32;
++  return Flush(p, nowPos32);
++}
++
++#define kBigHashDicLimit ((UInt32)1 << 24)
++
++static SRes LzmaEnc_Alloc(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  UInt32 beforeSize = kNumOpts;
++  Bool btMode;
++  if (!RangeEnc_Alloc(&p->rc, alloc))
++    return SZ_ERROR_MEM;
++  btMode = (p->matchFinderBase.btMode != 0);
++  #ifndef _7ZIP_ST
++  p->mtMode = (p->multiThread && !p->fastMode && btMode);
++  #endif
++
++  {
++    unsigned lclp = p->lc + p->lp;
++    if (p->litProbs == 0 || p->saveState.litProbs == 0 || p->lclp != lclp)
++    {
++      LzmaEnc_FreeLits(p, alloc);
++      p->litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb));
++      p->saveState.litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb));
++      if (p->litProbs == 0 || p->saveState.litProbs == 0)
++      {
++        LzmaEnc_FreeLits(p, alloc);
++        return SZ_ERROR_MEM;
++      }
++      p->lclp = lclp;
++    }
++  }
++
++  p->matchFinderBase.bigHash = (p->dictSize > kBigHashDicLimit);
++
++  if (beforeSize + p->dictSize < keepWindowSize)
++    beforeSize = keepWindowSize - p->dictSize;
++
++  #ifndef _7ZIP_ST
++  if (p->mtMode)
++  {
++    RINOK(MatchFinderMt_Create(&p->matchFinderMt, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig));
++    p->matchFinderObj = &p->matchFinderMt;
++    MatchFinderMt_CreateVTable(&p->matchFinderMt, &p->matchFinder);
++  }
++  else
++  #endif
++  {
++    if (!MatchFinder_Create(&p->matchFinderBase, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig))
++      return SZ_ERROR_MEM;
++    p->matchFinderObj = &p->matchFinderBase;
++    MatchFinder_CreateVTable(&p->matchFinderBase, &p->matchFinder);
++  }
++  return SZ_OK;
++}
++
++void LzmaEnc_Init(CLzmaEnc *p)
++{
++  UInt32 i;
++  p->state = 0;
++  for (i = 0 ; i < LZMA_NUM_REPS; i++)
++    p->reps[i] = 0;
++
++  RangeEnc_Init(&p->rc);
++
++
++  for (i = 0; i < kNumStates; i++)
++  {
++    UInt32 j;
++    for (j = 0; j < LZMA_NUM_PB_STATES_MAX; j++)
++    {
++      p->isMatch[i][j] = kProbInitValue;
++      p->isRep0Long[i][j] = kProbInitValue;
++    }
++    p->isRep[i] = kProbInitValue;
++    p->isRepG0[i] = kProbInitValue;
++    p->isRepG1[i] = kProbInitValue;
++    p->isRepG2[i] = kProbInitValue;
++  }
++
++  {
++    UInt32 num = 0x300 << (p->lp + p->lc);
++    for (i = 0; i < num; i++)
++      p->litProbs[i] = kProbInitValue;
++  }
++
++  {
++    for (i = 0; i < kNumLenToPosStates; i++)
++    {
++      CLzmaProb *probs = p->posSlotEncoder[i];
++      UInt32 j;
++      for (j = 0; j < (1 << kNumPosSlotBits); j++)
++        probs[j] = kProbInitValue;
++    }
++  }
++  {
++    for (i = 0; i < kNumFullDistances - kEndPosModelIndex; i++)
++      p->posEncoders[i] = kProbInitValue;
++  }
++
++  LenEnc_Init(&p->lenEnc.p);
++  LenEnc_Init(&p->repLenEnc.p);
++
++  for (i = 0; i < (1 << kNumAlignBits); i++)
++    p->posAlignEncoder[i] = kProbInitValue;
++
++  p->optimumEndIndex = 0;
++  p->optimumCurrentIndex = 0;
++  p->additionalOffset = 0;
++
++  p->pbMask = (1 << p->pb) - 1;
++  p->lpMask = (1 << p->lp) - 1;
++}
++
++void LzmaEnc_InitPrices(CLzmaEnc *p)
++{
++  if (!p->fastMode)
++  {
++    FillDistancesPrices(p);
++    FillAlignPrices(p);
++  }
++
++  p->lenEnc.tableSize =
++  p->repLenEnc.tableSize =
++      p->numFastBytes + 1 - LZMA_MATCH_LEN_MIN;
++  LenPriceEnc_UpdateTables(&p->lenEnc, 1 << p->pb, p->ProbPrices);
++  LenPriceEnc_UpdateTables(&p->repLenEnc, 1 << p->pb, p->ProbPrices);
++}
++
++static SRes LzmaEnc_AllocAndInit(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  UInt32 i;
++  for (i = 0; i < (UInt32)kDicLogSizeMaxCompress; i++)
++    if (p->dictSize <= ((UInt32)1 << i))
++      break;
++  p->distTableSize = i * 2;
++
++  p->finished = False;
++  p->result = SZ_OK;
++  RINOK(LzmaEnc_Alloc(p, keepWindowSize, alloc, allocBig));
++  LzmaEnc_Init(p);
++  LzmaEnc_InitPrices(p);
++  p->nowPos64 = 0;
++  return SZ_OK;
++}
++
++static SRes LzmaEnc_Prepare(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream,
++    ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  p->matchFinderBase.stream = inStream;
++  p->needInit = 1;
++  p->rc.outStream = outStream;
++  return LzmaEnc_AllocAndInit(p, 0, alloc, allocBig);
++}
++
++SRes LzmaEnc_PrepareForLzma2(CLzmaEncHandle pp,
++    ISeqInStream *inStream, UInt32 keepWindowSize,
++    ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  p->matchFinderBase.stream = inStream;
++  p->needInit = 1;
++  return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
++}
++
++static void LzmaEnc_SetInputBuf(CLzmaEnc *p, const Byte *src, SizeT srcLen)
++{
++  p->matchFinderBase.directInput = 1;
++  p->matchFinderBase.bufferBase = (Byte *)src;
++  p->matchFinderBase.directInputRem = srcLen;
++}
++
++SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen,
++    UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  LzmaEnc_SetInputBuf(p, src, srcLen);
++  p->needInit = 1;
++
++  return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
++}
++
++void LzmaEnc_Finish(CLzmaEncHandle pp)
++{
++  #ifndef _7ZIP_ST
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  if (p->mtMode)
++    MatchFinderMt_ReleaseStream(&p->matchFinderMt);
++  #else
++  pp = pp;
++  #endif
++}
++
++typedef struct
++{
++  ISeqOutStream funcTable;
++  Byte *data;
++  SizeT rem;
++  Bool overflow;
++} CSeqOutStreamBuf;
++
++static size_t MyWrite(void *pp, const void *data, size_t size)
++{
++  CSeqOutStreamBuf *p = (CSeqOutStreamBuf *)pp;
++  if (p->rem < size)
++  {
++    size = p->rem;
++    p->overflow = True;
++  }
++  memcpy(p->data, data, size);
++  p->rem -= size;
++  p->data += size;
++  return size;
++}
++
++
++UInt32 LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp)
++{
++  const CLzmaEnc *p = (CLzmaEnc *)pp;
++  return p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
++}
++
++const Byte *LzmaEnc_GetCurBuf(CLzmaEncHandle pp)
++{
++  const CLzmaEnc *p = (CLzmaEnc *)pp;
++  return p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
++}
++
++SRes LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit,
++    Byte *dest, size_t *destLen, UInt32 desiredPackSize, UInt32 *unpackSize)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  UInt64 nowPos64;
++  SRes res;
++  CSeqOutStreamBuf outStream;
++
++  outStream.funcTable.Write = MyWrite;
++  outStream.data = dest;
++  outStream.rem = *destLen;
++  outStream.overflow = False;
++
++  p->writeEndMark = False;
++  p->finished = False;
++  p->result = SZ_OK;
++
++  if (reInit)
++    LzmaEnc_Init(p);
++  LzmaEnc_InitPrices(p);
++  nowPos64 = p->nowPos64;
++  RangeEnc_Init(&p->rc);
++  p->rc.outStream = &outStream.funcTable;
++
++  res = LzmaEnc_CodeOneBlock(p, True, desiredPackSize, *unpackSize);
++  
++  *unpackSize = (UInt32)(p->nowPos64 - nowPos64);
++  *destLen -= outStream.rem;
++  if (outStream.overflow)
++    return SZ_ERROR_OUTPUT_EOF;
++
++  return res;
++}
++
++static SRes LzmaEnc_Encode2(CLzmaEnc *p, ICompressProgress *progress)
++{
++  SRes res = SZ_OK;
++
++  #ifndef _7ZIP_ST
++  Byte allocaDummy[0x300];
++  int i = 0;
++  for (i = 0; i < 16; i++)
++    allocaDummy[i] = (Byte)i;
++  #endif
++
++  for (;;)
++  {
++    res = LzmaEnc_CodeOneBlock(p, False, 0, 0);
++    if (res != SZ_OK || p->finished != 0)
++      break;
++    if (progress != 0)
++    {
++      res = progress->Progress(progress, p->nowPos64, RangeEnc_GetProcessed(&p->rc));
++      if (res != SZ_OK)
++      {
++        res = SZ_ERROR_PROGRESS;
++        break;
++      }
++    }
++  }
++  LzmaEnc_Finish(p);
++  return res;
++}
++
++SRes LzmaEnc_Encode(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream, ICompressProgress *progress,
++    ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  RINOK(LzmaEnc_Prepare(pp, outStream, inStream, alloc, allocBig));
++  return LzmaEnc_Encode2((CLzmaEnc *)pp, progress);
++}
++
++SRes LzmaEnc_WriteProperties(CLzmaEncHandle pp, Byte *props, SizeT *size)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  int i;
++  UInt32 dictSize = p->dictSize;
++  if (*size < LZMA_PROPS_SIZE)
++    return SZ_ERROR_PARAM;
++  *size = LZMA_PROPS_SIZE;
++  props[0] = (Byte)((p->pb * 5 + p->lp) * 9 + p->lc);
++
++  for (i = 11; i <= 30; i++)
++  {
++    if (dictSize <= ((UInt32)2 << i))
++    {
++      dictSize = (2 << i);
++      break;
++    }
++    if (dictSize <= ((UInt32)3 << i))
++    {
++      dictSize = (3 << i);
++      break;
++    }
++  }
++
++  for (i = 0; i < 4; i++)
++    props[1 + i] = (Byte)(dictSize >> (8 * i));
++  return SZ_OK;
++}
++
++SRes LzmaEnc_MemEncode(CLzmaEncHandle pp, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
++    int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  SRes res;
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++
++  CSeqOutStreamBuf outStream;
++
++  LzmaEnc_SetInputBuf(p, src, srcLen);
++
++  outStream.funcTable.Write = MyWrite;
++  outStream.data = dest;
++  outStream.rem = *destLen;
++  outStream.overflow = False;
++
++  p->writeEndMark = writeEndMark;
++
++  p->rc.outStream = &outStream.funcTable;
++  res = LzmaEnc_MemPrepare(pp, src, srcLen, 0, alloc, allocBig);
++  if (res == SZ_OK)
++    res = LzmaEnc_Encode2(p, progress);
++
++  *destLen -= outStream.rem;
++  if (outStream.overflow)
++    return SZ_ERROR_OUTPUT_EOF;
++  return res;
++}
++
++SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
++    const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
++    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  CLzmaEnc *p = (CLzmaEnc *)LzmaEnc_Create(alloc);
++  SRes res;
++  if (p == 0)
++    return SZ_ERROR_MEM;
++
++  res = LzmaEnc_SetProps(p, props);
++  if (res == SZ_OK)
++  {
++    res = LzmaEnc_WriteProperties(p, propsEncoded, propsSize);
++    if (res == SZ_OK)
++      res = LzmaEnc_MemEncode(p, dest, destLen, src, srcLen,
++          writeEndMark, progress, alloc, allocBig);
++  }
++
++  LzmaEnc_Destroy(p, alloc, allocBig);
++  return res;
++}
+--- /dev/null
++++ b/lib/lzma/Makefile
+@@ -0,0 +1,7 @@
++lzma_compress-objs := LzFind.o LzmaEnc.o
++lzma_decompress-objs := LzmaDec.o
++
++obj-$(CONFIG_LZMA_COMPRESS) += lzma_compress.o
++obj-$(CONFIG_LZMA_DECOMPRESS) += lzma_decompress.o
++
++EXTRA_CFLAGS += -Iinclude/linux -Iinclude/linux/lzma -include types.h
diff --git a/target/linux/generic/patches-2.6.35/011-mips_boot.patch b/target/linux/generic/patches-2.6.35/011-mips_boot.patch
new file mode 100644
index 0000000000..c2a043acde
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/011-mips_boot.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
+@@ -121,6 +121,8 @@
+ #endif
+ 	.endm
+ 
++	j kernel_entry
++	nop
+ #ifndef CONFIG_NO_EXCEPT_FILL
+ 	/*
+ 	 * Reserved space for exception handlers.
diff --git a/target/linux/generic/patches-2.6.35/012-extra_optimization.patch b/target/linux/generic/patches-2.6.35/012-extra_optimization.patch
new file mode 100644
index 0000000000..0b5174cbbd
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/012-extra_optimization.patch
@@ -0,0 +1,21 @@
+--- a/Makefile
++++ b/Makefile
+@@ -529,7 +529,7 @@ all: vmlinux
+ ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+ KBUILD_CFLAGS	+= -Os
+ else
+-KBUILD_CFLAGS	+= -O2
++KBUILD_CFLAGS	+= -O2 -fno-reorder-blocks -fno-tree-ch
+ endif
+ 
+ include $(srctree)/arch/$(SRCARCH)/Makefile
+@@ -567,6 +567,9 @@ endif
+ NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
+ CHECKFLAGS     += $(NOSTDINC_FLAGS)
+ 
++# improve gcc optimization
++CFLAGS += $(call cc-option,-funit-at-a-time,)
++
+ # warn about C99 declaration after statement
+ KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
+ 
diff --git a/target/linux/generic/patches-2.6.35/013-gcc4_inline_fix.patch b/target/linux/generic/patches-2.6.35/013-gcc4_inline_fix.patch
new file mode 100644
index 0000000000..a7082de492
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/013-gcc4_inline_fix.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/include/asm/system.h
++++ b/arch/mips/include/asm/system.h
+@@ -198,7 +198,7 @@ extern __u64 __xchg_u64_unsupported_on_3
+ #define __xchg_u64 __xchg_u64_unsupported_on_32bit_kernels
+ #endif
+ 
+-static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
++static __always_inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+ {
+ 	switch (size) {
+ 	case 4:
diff --git a/target/linux/generic/patches-2.6.35/014-samsung_flash.patch b/target/linux/generic/patches-2.6.35/014-samsung_flash.patch
new file mode 100644
index 0000000000..1b028edd98
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/014-samsung_flash.patch
@@ -0,0 +1,50 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -372,6 +372,8 @@ static struct cfi_fixup fixup_table[] = 
+ static void cfi_fixup_major_minor(struct cfi_private *cfi,
+ 				  struct cfi_pri_amdstd *extp)
+ {
++	// manufacturers defined in include/linux/mtd/cfi.h
++
+ 	if (cfi->mfr == CFI_MFR_SAMSUNG && cfi->id == 0x257e &&
+ 	    extp->MajorVersion == '0')
+ 		extp->MajorVersion = '1';
+@@ -404,6 +406,9 @@ struct mtd_info *cfi_cmdset_0002(struct 
+ 
+ 	mtd->reboot_notifier.notifier_call = cfi_amdstd_reboot;
+ 
++	printk(" CFI mfr 0x%08x\n", cfi->mfr);	// TODO: Is there a more general place to print this info?
++	printk(" CFI id  0x%08x\n", cfi->id);
++
+ 	if (cfi->cfi_mode==CFI_MODE_CFI){
+ 		unsigned char bootloc;
+ 		__u16 adr = primary?cfi->cfiq->P_ADR:cfi->cfiq->A_ADR;
+@@ -417,16 +422,24 @@ struct mtd_info *cfi_cmdset_0002(struct 
+ 			 */
+ 			cfi_fixup_major_minor(cfi, extp);
+ 
+-			if (extp->MajorVersion != '1' ||
+-			    (extp->MinorVersion < '0' || extp->MinorVersion > '4')) {
++			// valid primary extension versions are: 1.0, 1.1, 1.2, 1.3
++			// see: http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_r20.pdf, page 19 and on
++			//      http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_100_20011201.pdf
++			if (extp->MajorVersion < '1' ||
++			    extp->MajorVersion > '1' ||
++			    (extp->MajorVersion == '1' && ( extp->MinorVersion < '0' || extp->MinorVersion > '3'))) {
+ 				printk(KERN_ERR "  Unknown Amd/Fujitsu Extended Query "
+-				       "version %c.%c.\n",  extp->MajorVersion,
+-				       extp->MinorVersion);
++				       "version %c.%c (0x%02x/0x%02x).\n",
++				       extp->MajorVersion, extp->MinorVersion,
++				       extp->MajorVersion, extp->MinorVersion);
+ 				kfree(extp);
+ 				kfree(mtd);
+ 				return NULL;
+ 			}
+ 
++			printk("  Amd/Fujitsu Extended Query version %c.%c.\n",
++			       extp->MajorVersion, extp->MinorVersion);
++
+ 			/* Install our own private info structure */
+ 			cfi->cmdset_priv = extp;
+ 
diff --git a/target/linux/generic/patches-2.6.35/020-mips_multi_machine_support.patch b/target/linux/generic/patches-2.6.35/020-mips_multi_machine_support.patch
new file mode 100644
index 0000000000..ca0c10b20d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/020-mips_multi_machine_support.patch
@@ -0,0 +1,208 @@
+--- /dev/null
++++ b/arch/mips/include/asm/mips_machine.h
+@@ -0,0 +1,54 @@
++/*
++ *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ */
++
++#ifndef __ASM_MIPS_MACHINE_H
++#define __ASM_MIPS_MACHINE_H
++
++#include <linux/init.h>
++#include <linux/list.h>
++
++#include <asm/bootinfo.h>
++
++struct mips_machine {
++	unsigned long		mach_type;
++	const char		*mach_id;
++	const char		*mach_name;
++	void			(*mach_setup)(void);
++};
++
++#define MIPS_MACHINE(_type, _id, _name, _setup) 		\
++static const char machine_name_##_type[] __initconst		\
++			__aligned(1) = _name;			\
++static const char machine_id_##_type[] __initconst		\
++			__aligned(1) = _id;			\
++static struct mips_machine machine_##_type			\
++		__used __section(.mips.machines.init) =		\
++{								\
++	.mach_type	= _type,				\
++	.mach_id	= machine_id_##_type,			\
++	.mach_name	= machine_name_##_type,			\
++	.mach_setup	= _setup,				\
++};
++
++extern long __mips_machines_start;
++extern long __mips_machines_end;
++
++#ifdef CONFIG_MIPS_MACHINE
++int  mips_machtype_setup(char *id) __init;
++void mips_machine_setup(void) __init;
++void mips_set_machine_name(const char *name) __init;
++char *mips_get_machine_name(void);
++#else
++static inline int mips_machtype_setup(char *id) { return 1; }
++static inline void mips_machine_setup(void) { }
++static inline void mips_set_machine_name(const char *name) { }
++static inline char *mips_get_machine_name(void) { return NULL; }
++#endif /* CONFIG_MIPS_MACHINE */
++
++#endif /* __ASM_MIPS_MACHINE_H */
+--- /dev/null
++++ b/arch/mips/kernel/mips_machine.c
+@@ -0,0 +1,86 @@
++/*
++ *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ *
++ */
++#include <linux/mm.h>
++#include <linux/string.h>
++#include <linux/slab.h>
++
++#include <asm/mips_machine.h>
++
++static struct mips_machine *mips_machine __initdata;
++static char *mips_machine_name = "Unknown";
++
++#define for_each_machine(mach) \
++	for ((mach) = (struct mips_machine *)&__mips_machines_start; \
++	     (mach) && \
++	     (unsigned long)(mach) < (unsigned long)&__mips_machines_end; \
++	     (mach)++)
++
++__init void mips_set_machine_name(const char *name)
++{
++	char *p;
++
++	if (name == NULL)
++		return;
++
++	p = kstrdup(name, GFP_KERNEL);
++	if (!p)
++		pr_err("MIPS: no memory for machine_name\n");
++
++	mips_machine_name = p;
++}
++
++char *mips_get_machine_name(void)
++{
++	return mips_machine_name;
++}
++
++__init int mips_machtype_setup(char *id)
++{
++	struct mips_machine *mach;
++
++	for_each_machine(mach) {
++		if (mach->mach_id == NULL)
++			continue;
++
++		if (strcmp(mach->mach_id, id) == 0) {
++			mips_machtype = mach->mach_type;
++			return 0;
++		}
++	}
++
++	pr_err("MIPS: no machine found for id '%s', supported machines:\n", id);
++	pr_err("%-24s : %s\n", "id", "name");
++	for_each_machine(mach)
++		pr_err("%-24s : %s\n", mach->mach_id, mach->mach_name);
++
++	return 1;
++}
++
++__setup("machtype=", mips_machtype_setup);
++
++__init void mips_machine_setup(void)
++{
++	struct mips_machine *mach;
++
++	for_each_machine(mach) {
++		if (mips_machtype == mach->mach_type) {
++			mips_machine = mach;
++			break;
++		}
++	}
++
++	if (!mips_machine)
++		return;
++
++	mips_set_machine_name(mips_machine->mach_name);
++	pr_info("MIPS: machine is %s\n", mips_machine_name);
++
++	if (mips_machine->mach_setup)
++		mips_machine->mach_setup();
++}
+--- a/arch/mips/kernel/Makefile
++++ b/arch/mips/kernel/Makefile
+@@ -94,6 +94,7 @@ obj-$(CONFIG_GPIO_TXX9)		+= gpio_txx9.o
+ obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
+ obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
+ obj-$(CONFIG_SPINLOCK_TEST)	+= spinlock_test.o
++obj-$(CONFIG_MIPS_MACHINE)	+= mips_machine.o
+ 
+ CFLAGS_cpu-bugs64.o	= $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
+ 
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -853,6 +853,9 @@ config MIPS_DISABLE_OBSOLETE_IDE
+ config SYNC_R4K
+ 	bool
+ 
++config MIPS_MACHINE
++	def_bool n
++
+ config NO_IOPORT
+ 	def_bool n
+ 
+--- a/arch/mips/kernel/proc.c
++++ b/arch/mips/kernel/proc.c
+@@ -12,6 +12,7 @@
+ #include <asm/cpu-features.h>
+ #include <asm/mipsregs.h>
+ #include <asm/processor.h>
++#include <asm/mips_machine.h>
+ 
+ unsigned int vced_count, vcei_count;
+ 
+@@ -31,8 +32,12 @@ static int show_cpuinfo(struct seq_file 
+ 	/*
+ 	 * For the first processor also print the system type
+ 	 */
+-	if (n == 0)
++	if (n == 0) {
+ 		seq_printf(m, "system type\t\t: %s\n", get_system_type());
++		if (mips_get_machine_name())
++			seq_printf(m, "machine\t\t\t: %s\n",
++				   mips_get_machine_name());
++	}
+ 
+ 	seq_printf(m, "processor\t\t: %ld\n", n);
+ 	sprintf(fmt, "cpu model\t\t: %%s V%%d.%%d%s\n",
+--- a/arch/mips/kernel/vmlinux.lds.S
++++ b/arch/mips/kernel/vmlinux.lds.S
+@@ -98,6 +98,13 @@ SECTIONS
+ 	INIT_TEXT_SECTION(PAGE_SIZE)
+ 	INIT_DATA_SECTION(16)
+ 
++	. = ALIGN(4);
++	.mips.machines.init : AT(ADDR(.mips.machines.init) - LOAD_OFFSET) {
++		__mips_machines_start = .;
++		*(.mips.machines.init)
++		__mips_machines_end = .;
++	}
++
+ 	/* .exit.text is discarded at runtime, not link time, to deal with
+ 	 * references from .rodata
+ 	 */
diff --git a/target/linux/generic/patches-2.6.35/021-mips_image_cmdline_hack.patch b/target/linux/generic/patches-2.6.35/021-mips_image_cmdline_hack.patch
new file mode 100644
index 0000000000..a304f0bcc7
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/021-mips_image_cmdline_hack.patch
@@ -0,0 +1,28 @@
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -856,6 +856,10 @@ config SYNC_R4K
+ config MIPS_MACHINE
+ 	def_bool n
+ 
++config IMAGE_CMDLINE_HACK
++	bool "OpenWrt specific image command line hack"
++	default n
++
+ config NO_IOPORT
+ 	def_bool n
+ 
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
+@@ -143,6 +143,12 @@ FEXPORT(__kernel_entry)
+ 	j	kernel_entry
+ #endif
+ 
++#ifdef CONFIG_IMAGE_CMDLINE_HACK
++	.ascii	"CMDLINE:"
++EXPORT(__image_cmdline)
++	.fill	0x400
++#endif /* CONFIG_IMAGE_CMDLINE_HACK */
++
+ 	__REF
+ 
+ NESTED(kernel_entry, 16, sp)			# kernel entry point
diff --git a/target/linux/generic/patches-2.6.35/022-mips_use_generic_thread_info_allocator.patch b/target/linux/generic/patches-2.6.35/022-mips_use_generic_thread_info_allocator.patch
new file mode 100644
index 0000000000..786afd1dc6
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/022-mips_use_generic_thread_info_allocator.patch
@@ -0,0 +1,18 @@
+--- a/arch/mips/include/asm/thread_info.h
++++ b/arch/mips/include/asm/thread_info.h
+@@ -83,6 +83,7 @@ register struct thread_info *__current_t
+ #define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER)
+ #define THREAD_MASK (THREAD_SIZE - 1UL)
+ 
++#if 0
+ #define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+ 
+ #ifdef CONFIG_DEBUG_STACK_USAGE
+@@ -92,6 +93,7 @@ register struct thread_info *__current_t
+ #endif
+ 
+ #define free_thread_info(info) kfree(info)
++#endif
+ 
+ #endif /* !__ASSEMBLY__ */
+ 
diff --git a/target/linux/generic/patches-2.6.35/023-mips-fix-kexec.patch b/target/linux/generic/patches-2.6.35/023-mips-fix-kexec.patch
new file mode 100644
index 0000000000..e6928dde91
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/023-mips-fix-kexec.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/kernel/machine_kexec.c
++++ b/arch/mips/kernel/machine_kexec.c
+@@ -52,7 +52,7 @@ machine_kexec(struct kimage *image)
+ 	reboot_code_buffer =
+ 	  (unsigned long)page_address(image->control_code_page);
+ 
+-	kexec_start_address = image->start;
++	kexec_start_address = (unsigned long) phys_to_virt(image->start);
+ 	kexec_indirection_page =
+ 		(unsigned long) phys_to_virt(image->head & PAGE_MASK);
+ 
diff --git a/target/linux/generic/patches-2.6.35/025-mips_disable_fpu.patch b/target/linux/generic/patches-2.6.35/025-mips_disable_fpu.patch
new file mode 100644
index 0000000000..a65be6f2cf
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/025-mips_disable_fpu.patch
@@ -0,0 +1,161 @@
+MIPS: allow disabling the kernel FPU emulator
+
+This patch allows turning off the in-kernel Algorithmics
+FPU emulator support, which allows one to save a couple of
+precious blocks on an embedded system.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+--
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -841,6 +841,17 @@ config I8259
+ config MIPS_BONITO64
+ 	bool
+ 
++config MIPS_FPU_EMU
++	bool "Enable FPU emulation"
++	default y
++	help
++	   This option allows building a kernel with or without the Algorithmics
++	   FPU emulator enabled. Turning off this option results in a kernel which
++	   does not catch floating operations exceptions. Make sure that your toolchain
++	   is configured to enable software floating point emulation in that case.
++		
++	   If unsure say Y here.
++
+ config MIPS_MSC
+ 	bool
+ 
+--- a/arch/mips/math-emu/Makefile
++++ b/arch/mips/math-emu/Makefile
+@@ -2,12 +2,14 @@
+ # Makefile for the Linux/MIPS kernel FPU emulation.
+ #
+ 
+-obj-y	:= cp1emu.o ieee754m.o ieee754d.o ieee754dp.o ieee754sp.o ieee754.o \
++obj-y	:=	kernel_linkage.o dsemul.o cp1emu.o
++
++obj-$(CONFIG_MIPS_FPU_EMU)	+= ieee754m.o ieee754d.o ieee754dp.o ieee754sp.o ieee754.o \
+ 	   ieee754xcpt.o dp_frexp.o dp_modf.o dp_div.o dp_mul.o dp_sub.o \
+ 	   dp_add.o dp_fsp.o dp_cmp.o dp_logb.o dp_scalb.o dp_simple.o \
+ 	   dp_tint.o dp_fint.o dp_tlong.o dp_flong.o sp_frexp.o sp_modf.o \
+ 	   sp_div.o sp_mul.o sp_sub.o sp_add.o sp_fdp.o sp_cmp.o sp_logb.o \
+ 	   sp_scalb.o sp_simple.o sp_tint.o sp_fint.o sp_tlong.o sp_flong.o \
+-	   dp_sqrt.o sp_sqrt.o kernel_linkage.o dsemul.o
++	   dp_sqrt.o sp_sqrt.o
+ 
+ EXTRA_CFLAGS += -Werror
+--- a/arch/mips/math-emu/cp1emu.c
++++ b/arch/mips/math-emu/cp1emu.c
+@@ -58,7 +58,11 @@
+ #define __mips 4
+ 
+ /* Function which emulates a floating point instruction. */
++#ifdef CONFIG_DEBUG_FS
++DEFINE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats);
++#endif
+ 
++#ifdef CONFIG_MIPS_FPU_EMU
+ static int fpu_emu(struct pt_regs *, struct mips_fpu_struct *,
+ 	mips_instruction);
+ 
+@@ -69,10 +73,6 @@ static int fpux_emu(struct pt_regs *,
+ 
+ /* Further private data for which no space exists in mips_fpu_struct */
+ 
+-#ifdef CONFIG_DEBUG_FS
+-DEFINE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats);
+-#endif
+-
+ /* Control registers */
+ 
+ #define FPCREG_RID	0	/* $0  = revision id */
+@@ -1284,7 +1284,6 @@ int fpu_emulator_cop1Handler(struct pt_r
+ 
+ 	return sig;
+ }
+-
+ #ifdef CONFIG_DEBUG_FS
+ 
+ static int fpuemu_stat_get(void *data, u64 *val)
+@@ -1333,4 +1332,11 @@ static int __init debugfs_fpuemu(void)
+ 	return 0;
+ }
+ __initcall(debugfs_fpuemu);
+-#endif
++#endif /* CONFIG_DEBUGFS */
++#else
++int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
++        int has_fpu)
++{
++	return 0;
++}
++#endif /* CONFIG_MIPS_FPU_EMU */
+--- a/arch/mips/math-emu/dsemul.c
++++ b/arch/mips/math-emu/dsemul.c
+@@ -109,6 +109,7 @@ int mips_dsemul(struct pt_regs *regs, mi
+ 	return SIGILL;		/* force out of emulation loop */
+ }
+ 
++#ifdef CONFIG_MIPS_FPU_EMU
+ int do_dsemulret(struct pt_regs *xcp)
+ {
+ 	struct emuframe __user *fr;
+@@ -165,3 +166,9 @@ int do_dsemulret(struct pt_regs *xcp)
+ 
+ 	return 1;
+ }
++#else
++int do_dsemulret(struct pt_regs *xcp)
++{
++	return 0;
++}
++#endif /* CONFIG_MIPS_FPU_EMU */
+--- a/arch/mips/math-emu/kernel_linkage.c
++++ b/arch/mips/math-emu/kernel_linkage.c
+@@ -29,6 +29,7 @@
+ 
+ #define SIGNALLING_NAN 0x7ff800007ff80000LL
+ 
++#ifdef CONFIG_MIPS_FPU_EMU
+ void fpu_emulator_init_fpu(void)
+ {
+ 	static int first = 1;
+@@ -112,4 +113,36 @@ int fpu_emulator_restore_context32(struc
+ 
+ 	return err;
+ }
+-#endif
++#endif	/* CONFIG_64BIT */
++#else
++
++void fpu_emulator_init_fpu(void)
++{
++	printk(KERN_INFO "FPU emulator disabled, make sure your toolchain"
++		"was compiled with software floating point support (soft-float)\n");
++	return;
++}
++
++int fpu_emulator_save_context(struct sigcontext __user *sc)
++{
++	return 0;
++}
++
++int fpu_emulator_restore_context(struct sigcontext __user *sc)
++{
++	return 0;
++}
++
++int fpu_emulator_save_context32(struct sigcontext32 __user *sc)
++{
++	return 0;
++}
++
++int fpu_emulator_restore_context32(struct sigcontext32 __user *sc)
++{
++	return 0;
++}
++
++#ifdef CONFIG_64BIT
++#endif	/* CONFIG_64BIT */
++#endif /* CONFIG_MIPS_FPU_EMU */
diff --git a/target/linux/generic/patches-2.6.35/027-mips_module_reloc.patch b/target/linux/generic/patches-2.6.35/027-mips_module_reloc.patch
new file mode 100644
index 0000000000..024e7f16cd
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/027-mips_module_reloc.patch
@@ -0,0 +1,368 @@
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -93,7 +93,7 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin
+ cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe
+ cflags-y			+= -msoft-float
+ LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
+-MODFLAGS			+= -mlong-calls
++MODFLAGS			+= -mno-long-calls
+ 
+ cflags-y += -ffreestanding
+ 
+--- a/arch/mips/include/asm/module.h
++++ b/arch/mips/include/asm/module.h
+@@ -9,6 +9,11 @@ struct mod_arch_specific {
+ 	struct list_head dbe_list;
+ 	const struct exception_table_entry *dbe_start;
+ 	const struct exception_table_entry *dbe_end;
++
++	void *phys_plt_tbl;
++	void *virt_plt_tbl;
++	unsigned int phys_plt_offset;
++	unsigned int virt_plt_offset;
+ };
+ 
+ typedef uint8_t Elf64_Byte;		/* Type for a 8-bit quantity.  */
+--- a/arch/mips/kernel/module.c
++++ b/arch/mips/kernel/module.c
+@@ -43,6 +43,117 @@ static struct mips_hi16 *mips_hi16_list;
+ static LIST_HEAD(dbe_list);
+ static DEFINE_SPINLOCK(dbe_lock);
+ 
++/*
++ * Get the potential max trampolines size required of the init and
++ * non-init sections. Only used if we cannot find enough contiguous
++ * physically mapped memory to put the module into.
++ */
++static unsigned int
++get_plt_size(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
++             const char *secstrings, unsigned int symindex, bool is_init)
++{
++	unsigned long ret = 0;
++	unsigned int i, j;
++	Elf_Sym *syms;
++
++	/* Everything marked ALLOC (this includes the exported symbols) */
++	for (i = 1; i < hdr->e_shnum; ++i) {
++		unsigned int info = sechdrs[i].sh_info;
++
++		if (sechdrs[i].sh_type != SHT_REL
++		    && sechdrs[i].sh_type != SHT_RELA)
++			continue;
++
++		/* Not a valid relocation section? */
++		if (info >= hdr->e_shnum)
++			continue;
++
++		/* Don't bother with non-allocated sections */
++		if (!(sechdrs[info].sh_flags & SHF_ALLOC))
++			continue;
++
++		/* If it's called *.init*, and we're not init, we're
++                   not interested */
++		if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0)
++		    != is_init)
++			continue;
++
++		syms = (Elf_Sym *) sechdrs[symindex].sh_addr;
++		if (sechdrs[i].sh_type == SHT_REL) {
++			Elf_Mips_Rel *rel = (void *) sechdrs[i].sh_addr;
++			unsigned int size = sechdrs[i].sh_size / sizeof(*rel);
++
++			for (j = 0; j < size; ++j) {
++				Elf_Sym *sym;
++
++				if (ELF_MIPS_R_TYPE(rel[j]) != R_MIPS_26)
++					continue;
++
++				sym = syms + ELF_MIPS_R_SYM(rel[j]);
++				if (!is_init && sym->st_shndx != SHN_UNDEF)
++					continue;
++
++				ret += 4 * sizeof(int);
++			}
++		} else {
++			Elf_Mips_Rela *rela = (void *) sechdrs[i].sh_addr;
++			unsigned int size = sechdrs[i].sh_size / sizeof(*rela);
++
++			for (j = 0; j < size; ++j) {
++				Elf_Sym *sym;
++
++				if (ELF_MIPS_R_TYPE(rela[j]) != R_MIPS_26)
++					continue;
++
++				sym = syms + ELF_MIPS_R_SYM(rela[j]);
++				if (!is_init && sym->st_shndx != SHN_UNDEF)
++					continue;
++
++				ret += 4 * sizeof(int);
++			}
++		}
++	}
++
++	return ret;
++}
++
++#ifndef MODULE_START
++static void *alloc_phys(unsigned long size)
++{
++	unsigned order;
++	struct page *page;
++	struct page *p;
++
++	size = PAGE_ALIGN(size);
++	order = get_order(size);
++
++	page = alloc_pages(GFP_KERNEL | __GFP_NORETRY | __GFP_NOWARN |
++			__GFP_THISNODE, order);
++	if (!page)
++		return NULL;
++
++	split_page(page, order);
++
++	for (p = page + (size >> PAGE_SHIFT); p < page + (1 << order); ++p)
++		__free_page(p);
++
++	return page_address(page);
++}
++#endif
++
++static void free_phys(void *ptr, unsigned long size)
++{
++	struct page *page;
++	struct page *end;
++
++	page = virt_to_page(ptr);
++	end = page + (PAGE_ALIGN(size) >> PAGE_SHIFT);
++
++	for (; page < end; ++page)
++		__free_page(page);
++}
++
++
+ void *module_alloc(unsigned long size)
+ {
+ #ifdef MODULE_START
+@@ -58,21 +169,99 @@ void *module_alloc(unsigned long size)
+ 
+ 	return __vmalloc_area(area, GFP_KERNEL, PAGE_KERNEL);
+ #else
++	void *ptr;
++
+ 	if (size == 0)
+ 		return NULL;
+-	return vmalloc(size);
++
++	ptr = alloc_phys(size);
++
++	/* If we failed to allocate physically contiguous memory,
++	 * fall back to regular vmalloc. The module loader code will
++	 * create jump tables to handle long jumps */
++	if (!ptr)
++		return vmalloc(size);
++
++	return ptr;
++#endif
++}
++
++static inline bool is_phys_addr(void *ptr)
++{
++#ifdef CONFIG_64BIT
++	return (KSEGX((unsigned long)ptr) == CKSEG0);
++#else
++	return (KSEGX(ptr) == KSEG0);
+ #endif
+ }
+ 
+ /* Free memory returned from module_alloc */
+ void module_free(struct module *mod, void *module_region)
+ {
+-	vfree(module_region);
++	if (is_phys_addr(module_region)) {
++		if (mod->module_init == module_region)
++			free_phys(module_region, mod->init_size);
++		else if (mod->module_core == module_region)
++			free_phys(module_region, mod->core_size);
++		else
++			BUG();
++	} else {
++		vfree(module_region);
++	}
++}
++
++static void *__module_alloc(int size, bool phys)
++{
++	void *ptr;
++
++	if (phys)
++		ptr = kmalloc(size, GFP_KERNEL);
++	else
++		ptr = vmalloc(size);
++	return ptr;
++}
++
++static void __module_free(void *ptr)
++{
++	if (is_phys_addr(ptr))
++		kfree(ptr);
++	else
++		vfree(ptr);
+ }
+ 
+ int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
+ 			      char *secstrings, struct module *mod)
+ {
++	unsigned int symindex = 0;
++	unsigned int core_size, init_size;
++	int i;
++
++	for (i = 1; i < hdr->e_shnum; i++)
++		if (sechdrs[i].sh_type == SHT_SYMTAB)
++			symindex = i;
++
++	core_size = get_plt_size(hdr, sechdrs, secstrings, symindex, false);
++	init_size = get_plt_size(hdr, sechdrs, secstrings, symindex, true);
++
++	mod->arch.phys_plt_offset = 0;
++	mod->arch.virt_plt_offset = 0;
++	mod->arch.phys_plt_tbl = NULL;
++	mod->arch.virt_plt_tbl = NULL;
++
++	if ((core_size + init_size) == 0)
++		return 0;
++
++	mod->arch.phys_plt_tbl = __module_alloc(core_size + init_size, 1);
++	if (!mod->arch.phys_plt_tbl)
++		return -ENOMEM;
++
++	mod->arch.virt_plt_tbl = __module_alloc(core_size + init_size, 0);
++	if (!mod->arch.virt_plt_tbl) {
++		__module_free(mod->arch.phys_plt_tbl);
++		mod->arch.phys_plt_tbl = NULL;
++		return -ENOMEM;
++	}
++
+ 	return 0;
+ }
+ 
+@@ -95,28 +284,36 @@ static int apply_r_mips_32_rela(struct m
+ 	return 0;
+ }
+ 
+-static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
++static Elf_Addr add_plt_entry_to(unsigned *plt_offset,
++				 void *start, Elf_Addr v)
+ {
+-	if (v % 4) {
+-		pr_err("module %s: dangerous R_MIPS_26 REL relocation\n",
+-		       me->name);
+-		return -ENOEXEC;
+-	}
++	unsigned *tramp = start + *plt_offset;
++	*plt_offset += 4 * sizeof(int);
+ 
+-	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+-		printk(KERN_ERR
+-		       "module %s: relocation overflow\n",
+-		       me->name);
+-		return -ENOEXEC;
+-	}
++	/* adjust carry for addiu */
++	if (v & 0x00008000)
++		v += 0x10000;
+ 
+-	*location = (*location & ~0x03ffffff) |
+-	            ((*location + (v >> 2)) & 0x03ffffff);
++	tramp[0] = 0x3c190000 | (v >> 16);      /* lui t9, hi16 */
++	tramp[1] = 0x27390000 | (v & 0xffff);   /* addiu t9, t9, lo16 */
++	tramp[2] = 0x03200008;                  /* jr t9 */
++	tramp[3] = 0x00000000;                  /* nop */
+ 
+-	return 0;
++	return (Elf_Addr) tramp;
+ }
+ 
+-static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v)
++static Elf_Addr add_plt_entry(struct module *me, void *location, Elf_Addr v)
++{
++	if (is_phys_addr(location))
++		return add_plt_entry_to(&me->arch.phys_plt_offset,
++				me->arch.phys_plt_tbl, v);
++	else
++		return add_plt_entry_to(&me->arch.virt_plt_offset,
++				me->arch.virt_plt_tbl, v);
++
++}
++
++static int set_r_mips_26(struct module *me, u32 *location, u32 ofs, Elf_Addr v)
+ {
+ 	if (v % 4) {
+ 		pr_err("module %s: dangerous R_MIPS_26 RELArelocation\n",
+@@ -125,17 +322,31 @@ static int apply_r_mips_26_rela(struct m
+ 	}
+ 
+ 	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+-		printk(KERN_ERR
++	    v = add_plt_entry(me, location, v + (ofs << 2));
++		if (!v) {
++			printk(KERN_ERR
+ 		       "module %s: relocation overflow\n",
+ 		       me->name);
+-		return -ENOEXEC;
++			return -ENOEXEC;
++		}
++		ofs = 0;
+ 	}
+ 
+-	*location = (*location & ~0x03ffffff) | ((v >> 2) & 0x03ffffff);
++	*location = (*location & ~0x03ffffff) | ((ofs + (v >> 2)) & 0x03ffffff);
+ 
+ 	return 0;
+ }
+ 
++static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
++{
++	return set_r_mips_26(me, location, *location & 0x03ffffff, v);
++}
++
++static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v)
++{
++	return set_r_mips_26(me, location, 0, v);
++}
++
+ static int apply_r_mips_hi16_rel(struct module *me, u32 *location, Elf_Addr v)
+ {
+ 	struct mips_hi16 *n;
+@@ -400,11 +611,32 @@ int module_finalize(const Elf_Ehdr *hdr,
+ 		list_add(&me->arch.dbe_list, &dbe_list);
+ 		spin_unlock_irq(&dbe_lock);
+ 	}
++
++	/* Get rid of the fixup trampoline if we're running the module
++	 * from physically mapped address space */
++	if (me->arch.phys_plt_offset == 0) {
++		__module_free(me->arch.phys_plt_tbl);
++		me->arch.phys_plt_tbl = NULL;
++	}
++	if (me->arch.virt_plt_offset == 0) {
++		__module_free(me->arch.virt_plt_tbl);
++		me->arch.virt_plt_tbl = NULL;
++	}
++
+ 	return 0;
+ }
+ 
+ void module_arch_cleanup(struct module *mod)
+ {
++	if (mod->arch.phys_plt_tbl) {
++		__module_free(mod->arch.phys_plt_tbl);
++		mod->arch.phys_plt_tbl = NULL;
++	}
++	if (mod->arch.virt_plt_tbl) {
++		__module_free(mod->arch.virt_plt_tbl);
++		mod->arch.virt_plt_tbl = NULL;
++	}
++
+ 	spin_lock_irq(&dbe_lock);
+ 	list_del(&mod->arch.dbe_list);
+ 	spin_unlock_irq(&dbe_lock);
diff --git a/target/linux/generic/patches-2.6.35/028-module_exports.patch b/target/linux/generic/patches-2.6.35/028-module_exports.patch
new file mode 100644
index 0000000000..ad9074a885
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/028-module_exports.patch
@@ -0,0 +1,119 @@
+--- a/include/asm-generic/vmlinux.lds.h
++++ b/include/asm-generic/vmlinux.lds.h
+@@ -52,6 +52,27 @@
+ #define LOAD_OFFSET 0
+ #endif
+ 
++#ifndef SYMTAB_KEEP_STR
++#define SYMTAB_KEEP_STR *(__ksymtab_strings.*)
++#define SYMTAB_DISCARD_STR
++#else
++#define SYMTAB_DISCARD_STR *(__ksymtab_strings.*)
++#endif
++
++#ifndef SYMTAB_KEEP
++#define SYMTAB_KEEP *(__ksymtab.*)
++#define SYMTAB_DISCARD
++#else
++#define SYMTAB_DISCARD *(__ksymtab.*)
++#endif
++
++#ifndef SYMTAB_KEEP_GPL
++#define SYMTAB_KEEP_GPL *(__ksymtab_gpl.*)
++#define SYMTAB_DISCARD_GPL
++#else
++#define SYMTAB_DISCARD_GPL *(__ksymtab_gpl.*)
++#endif
++
+ #ifndef SYMBOL_PREFIX
+ #define VMLINUX_SYMBOL(sym) sym
+ #else
+@@ -258,35 +279,35 @@
+ 	/* Kernel symbol table: Normal symbols */			\
+ 	__ksymtab         : AT(ADDR(__ksymtab) - LOAD_OFFSET) {		\
+ 		VMLINUX_SYMBOL(__start___ksymtab) = .;			\
+-		*(__ksymtab)						\
++		SYMTAB_KEEP						\
+ 		VMLINUX_SYMBOL(__stop___ksymtab) = .;			\
+ 	}								\
+ 									\
+ 	/* Kernel symbol table: GPL-only symbols */			\
+ 	__ksymtab_gpl     : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) {	\
+ 		VMLINUX_SYMBOL(__start___ksymtab_gpl) = .;		\
+-		*(__ksymtab_gpl)					\
++		SYMTAB_KEEP_GPL						\
+ 		VMLINUX_SYMBOL(__stop___ksymtab_gpl) = .;		\
+ 	}								\
+ 									\
+ 	/* Kernel symbol table: Normal unused symbols */		\
+ 	__ksymtab_unused  : AT(ADDR(__ksymtab_unused) - LOAD_OFFSET) {	\
+ 		VMLINUX_SYMBOL(__start___ksymtab_unused) = .;		\
+-		*(__ksymtab_unused)					\
++		*(__ksymtab_unused.*)					\
+ 		VMLINUX_SYMBOL(__stop___ksymtab_unused) = .;		\
+ 	}								\
+ 									\
+ 	/* Kernel symbol table: GPL-only unused symbols */		\
+ 	__ksymtab_unused_gpl : AT(ADDR(__ksymtab_unused_gpl) - LOAD_OFFSET) { \
+ 		VMLINUX_SYMBOL(__start___ksymtab_unused_gpl) = .;	\
+-		*(__ksymtab_unused_gpl)					\
++		*(__ksymtab_unused_gpl.*)				\
+ 		VMLINUX_SYMBOL(__stop___ksymtab_unused_gpl) = .;	\
+ 	}								\
+ 									\
+ 	/* Kernel symbol table: GPL-future-only symbols */		\
+ 	__ksymtab_gpl_future : AT(ADDR(__ksymtab_gpl_future) - LOAD_OFFSET) { \
+ 		VMLINUX_SYMBOL(__start___ksymtab_gpl_future) = .;	\
+-		*(__ksymtab_gpl_future)					\
++		*(__ksymtab_gpl_future.*)				\
+ 		VMLINUX_SYMBOL(__stop___ksymtab_gpl_future) = .;	\
+ 	}								\
+ 									\
+@@ -327,7 +348,7 @@
+ 									\
+ 	/* Kernel symbol table: strings */				\
+         __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) {	\
+-		*(__ksymtab_strings)					\
++		SYMTAB_KEEP_STR						\
+ 	}								\
+ 									\
+ 	/* __*init sections */						\
+@@ -642,6 +663,9 @@
+ 	EXIT_TEXT							\
+ 	EXIT_DATA							\
+ 	EXIT_CALL							\
++	SYMTAB_DISCARD							\
++	SYMTAB_DISCARD_GPL						\
++	SYMTAB_DISCARD_STR						\
+ 	*(.discard)							\
+ 	}
+ 
+--- a/include/linux/module.h
++++ b/include/linux/module.h
+@@ -195,16 +195,24 @@ void *__symbol_get_gpl(const char *symbo
+ #define __CRC_SYMBOL(sym, sec)
+ #endif
+ 
++#ifdef MODULE
++#define __EXPORT_SUFFIX(sym)
++#else
++#define __EXPORT_SUFFIX(sym) "." #sym
++#endif
++
+ /* For every exported symbol, place a struct in the __ksymtab section */
+ #define __EXPORT_SYMBOL(sym, sec)				\
+ 	extern typeof(sym) sym;					\
+ 	__CRC_SYMBOL(sym, sec)					\
+ 	static const char __kstrtab_##sym[]			\
+-	__attribute__((section("__ksymtab_strings"), aligned(1))) \
++	__attribute__((section("__ksymtab_strings"		\
++	  __EXPORT_SUFFIX(sym)), aligned(1)))			\
+ 	= MODULE_SYMBOL_PREFIX #sym;                    	\
+ 	static const struct kernel_symbol __ksymtab_##sym	\
+ 	__used							\
+-	__attribute__((section("__ksymtab" sec), unused))	\
++	__attribute__((section("__ksymtab" sec			\
++	  __EXPORT_SUFFIX(sym)), unused))			\
+ 	= { (unsigned long)&sym, __kstrtab_##sym }
+ 
+ #define EXPORT_SYMBOL(sym)					\
diff --git a/target/linux/generic/patches-2.6.35/029-arm_module_unresolved_weak_sym.patch b/target/linux/generic/patches-2.6.35/029-arm_module_unresolved_weak_sym.patch
new file mode 100644
index 0000000000..8a3b2e23cb
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/029-arm_module_unresolved_weak_sym.patch
@@ -0,0 +1,13 @@
+--- a/arch/arm/kernel/module.c
++++ b/arch/arm/kernel/module.c
+@@ -121,6 +121,10 @@ apply_relocate(Elf32_Shdr *sechdrs, cons
+ 			return -ENOEXEC;
+ 		}
+ 
++		if ((IS_ERR_VALUE(sym->st_value) || !sym->st_value) &&
++		    ELF_ST_BIND(sym->st_info) == STB_WEAK)
++			continue;
++
+ 		loc = dstsec->sh_addr + rel->r_offset;
+ 
+ 		switch (ELF32_R_TYPE(rel->r_info)) {
diff --git a/target/linux/generic/patches-2.6.35/030-pci_disable_common_quirks.patch b/target/linux/generic/patches-2.6.35/030-pci_disable_common_quirks.patch
new file mode 100644
index 0000000000..0cf19789ae
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/030-pci_disable_common_quirks.patch
@@ -0,0 +1,43 @@
+--- a/drivers/pci/Kconfig
++++ b/drivers/pci/Kconfig
+@@ -40,6 +40,12 @@ config PCI_STUB
+ 
+ 	  When in doubt, say N.
+ 
++config PCI_DISABLE_COMMON_QUIRKS
++	bool "PCI disable common quirks"
++	depends on PCI
++	help
++	  If you don't know what to do here, say N.
++
+ config HT_IRQ
+ 	bool "Interrupts on hypertransport devices"
+ 	default y
+--- a/drivers/pci/quirks.c
++++ b/drivers/pci/quirks.c
+@@ -91,6 +91,7 @@ static void __devinit quirk_resource_ali
+ }
+ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_resource_alignment);
+ 
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
+ /* The Mellanox Tavor device gives false positive parity errors
+  * Mark this device with a broken_parity_status, to allow
+  * PCI scanning code to "skip" this now blacklisted device.
+@@ -1901,7 +1902,9 @@ static void __devinit fixup_rev1_53c810(
+ 	}
+ }
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
++#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
+ 
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
+ /* Enable 1k I/O space granularity on the Intel P64H2 */
+ static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
+ {
+@@ -2551,6 +2554,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1518, quirk_i82576_sriov);
+ 
+ #endif	/* CONFIG_PCI_IOV */
++#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
+ 
+ /*
+  * This is a quirk for the Ricoh MMC controller found as a part of
diff --git a/target/linux/generic/patches-2.6.35/031-ppc_gcc_build_fix.patch b/target/linux/generic/patches-2.6.35/031-ppc_gcc_build_fix.patch
new file mode 100644
index 0000000000..be4d2bfc2d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/031-ppc_gcc_build_fix.patch
@@ -0,0 +1,226 @@
+GCC 4.4.x looks to be adding support for generating out-of-line register
+saves/restores based on:
+
+http://gcc.gnu.org/ml/gcc-patches/2008-04/msg01678.html
+
+This breaks the kernel build as we'd have to link with libgcc to get the
+implementation of the register save/restores.
+
+To workaround this issue, we just stole the save/restore code from gcc
+and simplified it down for our needs (integer only).  We only do this if
+PPC32 as gcc makes believe the linker on ppc64 will deal with this and
+only if CONFIG_CC_OPTIMIZE_FOR_SIZE is set (thus -Os).
+
+Signed-off-by: Kumar Gala <[EMAIL PROTECTED]>
+---
+
+If someone using cutting edge toolchains for ppc64 could test and make
+sure if we enable CONFIG_CC_OPTIMIZE_FOR_SIZE things work that would be
+nice.
+
+- k
+
+ arch/powerpc/kernel/misc_32.S   |   77 +++++++++++++++++++++++++++
+ arch/powerpc/kernel/ppc_ksyms.c |  111 +++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 188 insertions(+), 0 deletions(-)
+
+--- a/arch/powerpc/kernel/misc_32.S
++++ b/arch/powerpc/kernel/misc_32.S
+@@ -802,3 +802,80 @@ relocate_new_kernel_end:
+ relocate_new_kernel_size:
+ 	.long relocate_new_kernel_end - relocate_new_kernel
+ #endif
++
++#if defined(CONFIG_PPC32) && defined(CONFIG_CC_OPTIMIZE_FOR_SIZE)
++/* Routines for saving integer registers, called by the compiler.  */
++/* Called with r11 pointing to the stack header word of the caller of the */
++/* function, just beyond the end of the integer save area.  */
++
++_GLOBAL(_savegpr_14)   stw     14,-72(11)      /* save gp registers */
++_GLOBAL(_savegpr_15)   stw     15,-68(11)
++_GLOBAL(_savegpr_16)   stw     16,-64(11)
++_GLOBAL(_savegpr_17)   stw     17,-60(11)
++_GLOBAL(_savegpr_18)   stw     18,-56(11)
++_GLOBAL(_savegpr_19)   stw     19,-52(11)
++_GLOBAL(_savegpr_20)   stw     20,-48(11)
++_GLOBAL(_savegpr_21)   stw     21,-44(11)
++_GLOBAL(_savegpr_22)   stw     22,-40(11)
++_GLOBAL(_savegpr_23)   stw     23,-36(11)
++_GLOBAL(_savegpr_24)   stw     24,-32(11)
++_GLOBAL(_savegpr_25)   stw     25,-28(11)
++_GLOBAL(_savegpr_26)   stw     26,-24(11)
++_GLOBAL(_savegpr_27)   stw     27,-20(11)
++_GLOBAL(_savegpr_28)   stw     28,-16(11)
++_GLOBAL(_savegpr_29)   stw     29,-12(11)
++_GLOBAL(_savegpr_30)   stw     30,-8(11)
++_GLOBAL(_savegpr_31)   stw     31,-4(11)
++                       blr
++
++/* Routines for restoring integer registers, called by the compiler.  */
++/* Called with r11 pointing to the stack header word of the caller of the */
++/* function, just beyond the end of the integer restore area.  */
++
++_GLOBAL(_restgpr_14)   lwz     14,-72(11)      /* restore gp registers */
++_GLOBAL(_restgpr_15)   lwz     15,-68(11)
++_GLOBAL(_restgpr_16)   lwz     16,-64(11)
++_GLOBAL(_restgpr_17)   lwz     17,-60(11)
++_GLOBAL(_restgpr_18)   lwz     18,-56(11)
++_GLOBAL(_restgpr_19)   lwz     19,-52(11)
++_GLOBAL(_restgpr_20)   lwz     20,-48(11)
++_GLOBAL(_restgpr_21)   lwz     21,-44(11)
++_GLOBAL(_restgpr_22)   lwz     22,-40(11)
++_GLOBAL(_restgpr_23)   lwz     23,-36(11)
++_GLOBAL(_restgpr_24)   lwz     24,-32(11)
++_GLOBAL(_restgpr_25)   lwz     25,-28(11)
++_GLOBAL(_restgpr_26)   lwz     26,-24(11)
++_GLOBAL(_restgpr_27)   lwz     27,-20(11)
++_GLOBAL(_restgpr_28)   lwz     28,-16(11)
++_GLOBAL(_restgpr_29)   lwz     29,-12(11)
++_GLOBAL(_restgpr_30)   lwz     30,-8(11)
++_GLOBAL(_restgpr_31)   lwz     31,-4(11)
++                       blr
++
++/* Routines for restoring integer registers, called by the compiler.  */
++/* Called with r11 pointing to the stack header word of the caller of the */
++/* function, just beyond the end of the integer restore area.  */
++
++_GLOBAL(_restgpr_14_x) lwz     14,-72(11)      /* restore gp registers */
++_GLOBAL(_restgpr_15_x) lwz     15,-68(11)
++_GLOBAL(_restgpr_16_x) lwz     16,-64(11)
++_GLOBAL(_restgpr_17_x) lwz     17,-60(11)
++_GLOBAL(_restgpr_18_x) lwz     18,-56(11)
++_GLOBAL(_restgpr_19_x) lwz     19,-52(11)
++_GLOBAL(_restgpr_20_x) lwz     20,-48(11)
++_GLOBAL(_restgpr_21_x) lwz     21,-44(11)
++_GLOBAL(_restgpr_22_x) lwz     22,-40(11)
++_GLOBAL(_restgpr_23_x) lwz     23,-36(11)
++_GLOBAL(_restgpr_24_x) lwz     24,-32(11)
++_GLOBAL(_restgpr_25_x) lwz     25,-28(11)
++_GLOBAL(_restgpr_26_x) lwz     26,-24(11)
++_GLOBAL(_restgpr_27_x) lwz     27,-20(11)
++_GLOBAL(_restgpr_28_x) lwz     28,-16(11)
++_GLOBAL(_restgpr_29_x) lwz     29,-12(11)
++_GLOBAL(_restgpr_30_x) lwz     30,-8(11)
++_GLOBAL(_restgpr_31_x) lwz     0,4(11)
++                       lwz     31,-4(11)
++                       mtlr    0
++                       mr      1,11
++                       blr
++#endif
+--- a/arch/powerpc/kernel/ppc_ksyms.c
++++ b/arch/powerpc/kernel/ppc_ksyms.c
+@@ -186,3 +186,114 @@ EXPORT_SYMBOL(__mtdcr);
+ EXPORT_SYMBOL(__mfdcr);
+ #endif
+ EXPORT_SYMBOL(empty_zero_page);
++
++#if defined(CONFIG_PPC32) && defined(CONFIG_CC_OPTIMIZE_FOR_SIZE)
++void _savegpr_14(void);
++void _savegpr_15(void);
++void _savegpr_16(void);
++void _savegpr_17(void);
++void _savegpr_18(void);
++void _savegpr_19(void);
++void _savegpr_20(void);
++void _savegpr_21(void);
++void _savegpr_22(void);
++void _savegpr_23(void);
++void _savegpr_24(void);
++void _savegpr_25(void);
++void _savegpr_26(void);
++void _savegpr_27(void);
++void _savegpr_28(void);
++void _savegpr_29(void);
++void _savegpr_30(void);
++void _savegpr_31(void);
++void _restgpr_14(void);
++void _restgpr_15(void);
++void _restgpr_16(void);
++void _restgpr_17(void);
++void _restgpr_18(void);
++void _restgpr_19(void);
++void _restgpr_20(void);
++void _restgpr_21(void);
++void _restgpr_22(void);
++void _restgpr_23(void);
++void _restgpr_24(void);
++void _restgpr_25(void);
++void _restgpr_26(void);
++void _restgpr_27(void);
++void _restgpr_28(void);
++void _restgpr_29(void);
++void _restgpr_30(void);
++void _restgpr_31(void);
++void _restgpr_14_x(void);
++void _restgpr_15_x(void);
++void _restgpr_16_x(void);
++void _restgpr_17_x(void);
++void _restgpr_18_x(void);
++void _restgpr_19_x(void);
++void _restgpr_20_x(void);
++void _restgpr_21_x(void);
++void _restgpr_22_x(void);
++void _restgpr_23_x(void);
++void _restgpr_24_x(void);
++void _restgpr_25_x(void);
++void _restgpr_26_x(void);
++void _restgpr_27_x(void);
++void _restgpr_28_x(void);
++void _restgpr_29_x(void);
++void _restgpr_30_x(void);
++void _restgpr_31_x(void);
++EXPORT_SYMBOL(_savegpr_14);
++EXPORT_SYMBOL(_savegpr_15);
++EXPORT_SYMBOL(_savegpr_16);
++EXPORT_SYMBOL(_savegpr_17);
++EXPORT_SYMBOL(_savegpr_18);
++EXPORT_SYMBOL(_savegpr_19);
++EXPORT_SYMBOL(_savegpr_20);
++EXPORT_SYMBOL(_savegpr_21);
++EXPORT_SYMBOL(_savegpr_22);
++EXPORT_SYMBOL(_savegpr_23);
++EXPORT_SYMBOL(_savegpr_24);
++EXPORT_SYMBOL(_savegpr_25);
++EXPORT_SYMBOL(_savegpr_26);
++EXPORT_SYMBOL(_savegpr_27);
++EXPORT_SYMBOL(_savegpr_28);
++EXPORT_SYMBOL(_savegpr_29);
++EXPORT_SYMBOL(_savegpr_30);
++EXPORT_SYMBOL(_savegpr_31);
++EXPORT_SYMBOL(_restgpr_14);
++EXPORT_SYMBOL(_restgpr_15);
++EXPORT_SYMBOL(_restgpr_16);
++EXPORT_SYMBOL(_restgpr_17);
++EXPORT_SYMBOL(_restgpr_18);
++EXPORT_SYMBOL(_restgpr_19);
++EXPORT_SYMBOL(_restgpr_20);
++EXPORT_SYMBOL(_restgpr_21);
++EXPORT_SYMBOL(_restgpr_22);
++EXPORT_SYMBOL(_restgpr_23);
++EXPORT_SYMBOL(_restgpr_24);
++EXPORT_SYMBOL(_restgpr_25);
++EXPORT_SYMBOL(_restgpr_26);
++EXPORT_SYMBOL(_restgpr_27);
++EXPORT_SYMBOL(_restgpr_28);
++EXPORT_SYMBOL(_restgpr_29);
++EXPORT_SYMBOL(_restgpr_30);
++EXPORT_SYMBOL(_restgpr_31);
++EXPORT_SYMBOL(_restgpr_14_x);
++EXPORT_SYMBOL(_restgpr_15_x);
++EXPORT_SYMBOL(_restgpr_16_x);
++EXPORT_SYMBOL(_restgpr_17_x);
++EXPORT_SYMBOL(_restgpr_18_x);
++EXPORT_SYMBOL(_restgpr_19_x);
++EXPORT_SYMBOL(_restgpr_20_x);
++EXPORT_SYMBOL(_restgpr_21_x);
++EXPORT_SYMBOL(_restgpr_22_x);
++EXPORT_SYMBOL(_restgpr_23_x);
++EXPORT_SYMBOL(_restgpr_24_x);
++EXPORT_SYMBOL(_restgpr_25_x);
++EXPORT_SYMBOL(_restgpr_26_x);
++EXPORT_SYMBOL(_restgpr_27_x);
++EXPORT_SYMBOL(_restgpr_28_x);
++EXPORT_SYMBOL(_restgpr_29_x);
++EXPORT_SYMBOL(_restgpr_30_x);
++EXPORT_SYMBOL(_restgpr_31_x);
++#endif /* CONFIG_PPC32 && CONFIG_CC_OPTIMIZE_FOR_SIZE */
diff --git a/target/linux/generic/patches-2.6.35/060-block2mtd_init.patch b/target/linux/generic/patches-2.6.35/060-block2mtd_init.patch
new file mode 100644
index 0000000000..7ff9c277ab
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/060-block2mtd_init.patch
@@ -0,0 +1,115 @@
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -14,6 +14,7 @@
+ #include <linux/list.h>
+ #include <linux/init.h>
+ #include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
+ #include <linux/buffer_head.h>
+ #include <linux/mutex.h>
+ #include <linux/mount.h>
+@@ -233,10 +234,11 @@ static void block2mtd_free_device(struct
+ 
+ 
+ /* FIXME: ensure that mtd->size % erase_size == 0 */
+-static struct block2mtd_dev *add_device(char *devname, int erase_size)
++static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname)
+ {
+ 	struct block_device *bdev;
+ 	struct block2mtd_dev *dev;
++	struct mtd_partition *part;
+ 	char *name;
+ 
+ 	if (!devname)
+@@ -276,13 +278,16 @@ static struct block2mtd_dev *add_device(
+ 
+ 	/* Setup the MTD structure */
+ 	/* make the name contain the block device in */
+-	name = kasprintf(GFP_KERNEL, "block2mtd: %s", devname);
++	if (!mtdname)
++		mtdname = devname;
++	name = kmalloc(strlen(mtdname) + 1, GFP_KERNEL);
+ 	if (!name)
+ 		goto devinit_err;
+ 
++	strcpy(name, mtdname);
+ 	dev->mtd.name = name;
+ 
+-	dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK;
++	dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK & ~(erase_size - 1);
+ 	dev->mtd.erasesize = erase_size;
+ 	dev->mtd.writesize = 1;
+ 	dev->mtd.type = MTD_RAM;
+@@ -295,14 +300,17 @@ static struct block2mtd_dev *add_device(
+ 	dev->mtd.priv = dev;
+ 	dev->mtd.owner = THIS_MODULE;
+ 
+-	if (add_mtd_device(&dev->mtd)) {
++	part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
++	part->name = dev->mtd.name;
++	part->offset = 0;
++	part->size = dev->mtd.size;
++	if (add_mtd_partitions(&dev->mtd, part, 1)) {
+ 		/* Device didnt get added, so free the entry */
+ 		goto devinit_err;
+ 	}
+ 	list_add(&dev->list, &blkmtd_device_list);
+ 	INFO("mtd%d: [%s] erase_size = %dKiB [%d]", dev->mtd.index,
+-			dev->mtd.name + strlen("block2mtd: "),
+-			dev->mtd.erasesize >> 10, dev->mtd.erasesize);
++			mtdname, dev->mtd.erasesize >> 10, dev->mtd.erasesize);
+ 	return dev;
+ 
+ devinit_err:
+@@ -375,9 +383,9 @@ static char block2mtd_paramline[80 + 12]
+ 
+ static int block2mtd_setup2(const char *val)
+ {
+-	char buf[80 + 12]; /* 80 for device, 12 for erase size */
++	char buf[80 + 12 + 80]; /* 80 for device, 12 for erase size, 80 for name */
+ 	char *str = buf;
+-	char *token[2];
++	char *token[3];
+ 	char *name;
+ 	size_t erase_size = PAGE_SIZE;
+ 	int i, ret;
+@@ -388,7 +396,7 @@ static int block2mtd_setup2(const char *
+ 	strcpy(str, val);
+ 	kill_final_newline(str);
+ 
+-	for (i = 0; i < 2; i++)
++	for (i = 0; i < 3; i++)
+ 		token[i] = strsep(&str, ",");
+ 
+ 	if (str)
+@@ -407,8 +415,10 @@ static int block2mtd_setup2(const char *
+ 			parse_err("illegal erase size");
+ 		}
+ 	}
++	if (token[2] && (strlen(token[2]) + 1 > 80))
++		parse_err("mtd device name too long");
+ 
+-	add_device(name, erase_size);
++	add_device(name, erase_size, token[2]);
+ 
+ 	return 0;
+ }
+@@ -442,7 +452,7 @@ static int block2mtd_setup(const char *v
+ 
+ 
+ module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);
+-MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>]\"");
++MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>]]\"");
+ 
+ static int __init block2mtd_init(void)
+ {
+--- a/fs/partitions/check.c
++++ b/fs/partitions/check.c
+@@ -639,6 +639,7 @@ try_scan:
+ 	kfree(state);
+ 	return 0;
+ }
++EXPORT_SYMBOL(rescan_partitions);
+ 
+ unsigned char *read_dev_sector(struct block_device *bdev, sector_t n, Sector *p)
+ {
diff --git a/target/linux/generic/patches-2.6.35/065-rootfs_split.patch b/target/linux/generic/patches-2.6.35/065-rootfs_split.patch
new file mode 100644
index 0000000000..d70d1835a3
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/065-rootfs_split.patch
@@ -0,0 +1,625 @@
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -53,6 +53,16 @@ config MTD_PARTITIONS
+ 	  devices. Partitioning on NFTL 'devices' is a different - that's the
+ 	  'normal' form of partitioning used on a block device.
+ 
++config MTD_ROOTFS_ROOT_DEV
++	bool "Automatically set 'rootfs' partition to be root filesystem"
++	depends on MTD_PARTITIONS
++	default y
++
++config MTD_ROOTFS_SPLIT
++	bool "Automatically split 'rootfs' partition for squashfs"
++	depends on MTD_PARTITIONS
++	default y
++
+ config MTD_REDBOOT_PARTS
+ 	tristate "RedBoot partition table parsing"
+ 	depends on MTD_PARTITIONS
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -18,6 +18,8 @@
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+ #include <linux/mtd/compatmac.h>
++#include <linux/root_dev.h>
++#include <linux/magic.h>
+ 
+ /* Our partition linked list */
+ static LIST_HEAD(mtd_partitions);
+@@ -35,7 +37,7 @@ struct mtd_part {
+  * the pointer to that structure with this macro.
+  */
+ #define PART(x)  ((struct mtd_part *)(x))
+-
++#define IS_PART(mtd) (mtd->read == part_read)
+ 
+ /*
+  * MTD methods which simply translate the effective address and pass through
+@@ -503,6 +505,150 @@ out_register:
+ 	return slave;
+ }
+ 
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++#define ROOTFS_SPLIT_NAME "rootfs_data"
++#define ROOTFS_REMOVED_NAME "<removed>"
++
++struct squashfs_super_block {
++	__le32 s_magic;
++	__le32 pad0[9];
++	__le64 bytes_used;
++};
++
++
++static int split_squashfs(struct mtd_info *master, int offset, int *split_offset)
++{
++	struct squashfs_super_block sb;
++	int len, ret;
++
++	ret = master->read(master, offset, sizeof(sb), &len, (void *) &sb);
++	if (ret || (len != sizeof(sb))) {
++		printk(KERN_ALERT "split_squashfs: error occured while reading "
++			"from \"%s\"\n", master->name);
++		return -EINVAL;
++	}
++
++	if (SQUASHFS_MAGIC != le32_to_cpu(sb.s_magic) ) {
++		printk(KERN_ALERT "split_squashfs: no squashfs found in \"%s\"\n",
++			master->name);
++		*split_offset = 0;
++		return 0;
++	}
++
++	if (le64_to_cpu((sb.bytes_used)) <= 0) {
++		printk(KERN_ALERT "split_squashfs: squashfs is empty in \"%s\"\n",
++			master->name);
++		*split_offset = 0;
++		return 0;
++	}
++
++	len = (u32) le64_to_cpu(sb.bytes_used);
++	len += (offset & 0x000fffff);
++	len +=  (master->erasesize - 1);
++	len &= ~(master->erasesize - 1);
++	len -= (offset & 0x000fffff);
++	*split_offset = offset + len;
++
++	return 0;
++}
++
++static int split_rootfs_data(struct mtd_info *master, struct mtd_info *rpart, const struct mtd_partition *part)
++{
++	struct mtd_partition *dpart;
++	struct mtd_part *slave = NULL;
++	int split_offset = 0;
++	int ret;
++
++	ret = split_squashfs(master, part->offset, &split_offset);
++	if (ret)
++		return ret;
++
++	if (split_offset <= 0)
++		return 0;
++
++	dpart = kmalloc(sizeof(*part)+sizeof(ROOTFS_SPLIT_NAME)+1, GFP_KERNEL);
++	if (dpart == NULL) {
++		printk(KERN_INFO "split_squashfs: no memory for partition \"%s\"\n",
++			ROOTFS_SPLIT_NAME);
++		return -ENOMEM;
++	}
++
++	memcpy(dpart, part, sizeof(*part));
++	dpart->name = (unsigned char *)&dpart[1];
++	strcpy(dpart->name, ROOTFS_SPLIT_NAME);
++
++	dpart->size -= split_offset - dpart->offset;
++	dpart->offset = split_offset;
++
++	if (dpart == NULL)
++		return 1;
++
++	printk(KERN_INFO "mtd: partition \"%s\" created automatically, ofs=%llX, len=%llX \n",
++		ROOTFS_SPLIT_NAME, dpart->offset, dpart->size);
++
++	slave = add_one_partition(master, dpart, 0, split_offset);
++	if (!slave) {
++		kfree(dpart);
++		return -ENOMEM;
++	}
++	rpart->split = &slave->mtd;
++
++	return 0;
++}
++
++static int refresh_rootfs_split(struct mtd_info *mtd)
++{
++	struct mtd_partition tpart;
++	struct mtd_part *part;
++	char *name;
++	//int index = 0;
++	int offset, size;
++	int ret;
++
++	part = PART(mtd);
++
++	/* check for the new squashfs offset first */
++	ret = split_squashfs(part->master, part->offset, &offset);
++	if (ret)
++		return ret;
++
++	if ((offset > 0) && !mtd->split) {
++		printk(KERN_INFO "%s: creating new split partition for \"%s\"\n", __func__, mtd->name);
++		/* if we don't have a rootfs split partition, create a new one */
++		tpart.name = (char *) mtd->name;
++		tpart.size = mtd->size;
++		tpart.offset = part->offset;
++
++		return split_rootfs_data(part->master, &part->mtd, &tpart);
++	} else if ((offset > 0) && mtd->split) {
++		/* update the offsets of the existing partition */
++		size = mtd->size + part->offset - offset;
++
++		part = PART(mtd->split);
++		part->offset = offset;
++		part->mtd.size = size;
++		printk(KERN_INFO "%s: %s partition \"" ROOTFS_SPLIT_NAME "\", offset: 0x%06x (0x%06x)\n",
++			__func__, (!strcmp(part->mtd.name, ROOTFS_SPLIT_NAME) ? "updating" : "creating"),
++			(u32) part->offset, (u32) part->mtd.size);
++		name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
++		strcpy(name, ROOTFS_SPLIT_NAME);
++		part->mtd.name = name;
++	} else if ((offset <= 0) && mtd->split) {
++		printk(KERN_INFO "%s: removing partition \"%s\"\n", __func__, mtd->split->name);
++
++		/* mark existing partition as removed */
++		part = PART(mtd->split);
++		name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
++		strcpy(name, ROOTFS_REMOVED_NAME);
++		part->mtd.name = name;
++		part->offset = 0;
++		part->mtd.size = 0;
++	}
++
++	return 0;
++}
++#endif /* CONFIG_MTD_ROOTFS_SPLIT */
++
+ /*
+  * This function, given a master MTD object and a partition table, creates
+  * and registers slave MTD objects which are bound to the master according to
+@@ -518,7 +664,7 @@ int add_mtd_partitions(struct mtd_info *
+ {
+ 	struct mtd_part *slave;
+ 	uint64_t cur_offset = 0;
+-	int i;
++	int i, ret;
+ 
+ 	printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
+ 
+@@ -526,6 +672,21 @@ int add_mtd_partitions(struct mtd_info *
+ 		slave = add_one_partition(master, parts + i, i, cur_offset);
+ 		if (!slave)
+ 			return -ENOMEM;
++
++		if (!strcmp(parts[i].name, "rootfs")) {
++#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
++			if (ROOT_DEV == 0) {
++				printk(KERN_NOTICE "mtd: partition \"rootfs\" "
++					"set to be root filesystem\n");
++				ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, slave->mtd.index);
++			}
++#endif
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++			ret = split_rootfs_data(master, &slave->mtd, &parts[i]);
++			/* if (ret == 0)
++				j++; */
++#endif
++		}
+ 		cur_offset = slave->offset + slave->mtd.size;
+ 	}
+ 
+@@ -533,6 +694,32 @@ int add_mtd_partitions(struct mtd_info *
+ }
+ EXPORT_SYMBOL(add_mtd_partitions);
+ 
++int refresh_mtd_partitions(struct mtd_info *mtd)
++{
++	int ret = 0;
++
++	if (IS_PART(mtd)) {
++		struct mtd_part *part;
++		struct mtd_info *master;
++
++		part = PART(mtd);
++		master = part->master;
++		if (master->refresh_device)
++			ret = master->refresh_device(master);
++	}
++
++	if (!ret && mtd->refresh_device)
++		ret = mtd->refresh_device(mtd);
++
++#ifdef CONFIG_MTD_ROOTFS_SPLIT
++	if (!ret && IS_PART(mtd) && !strcmp(mtd->name, "rootfs"))
++		refresh_rootfs_split(mtd);
++#endif
++
++	return 0;
++}
++EXPORT_SYMBOL_GPL(refresh_mtd_partitions);
++
+ static DEFINE_SPINLOCK(part_parser_lock);
+ static LIST_HEAD(part_parsers);
+ 
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -30,6 +30,8 @@ struct block2mtd_dev {
+ 	struct block_device *blkdev;
+ 	struct mtd_info mtd;
+ 	struct mutex write_mutex;
++	rwlock_t bdev_mutex;
++	char devname[0];
+ };
+ 
+ 
+@@ -82,6 +84,12 @@ static int block2mtd_erase(struct mtd_in
+ 	size_t len = instr->len;
+ 	int err;
+ 
++	read_lock(&dev->bdev_mutex);
++	if (!dev->blkdev) {
++		err = -EINVAL;
++		goto done;
++	}
++
+ 	instr->state = MTD_ERASING;
+ 	mutex_lock(&dev->write_mutex);
+ 	err = _block2mtd_erase(dev, from, len);
+@@ -94,6 +102,10 @@ static int block2mtd_erase(struct mtd_in
+ 
+ 	instr->state = MTD_ERASE_DONE;
+ 	mtd_erase_callback(instr);
++
++done:
++	read_unlock(&dev->bdev_mutex);
++
+ 	return err;
+ }
+ 
+@@ -105,10 +117,14 @@ static int block2mtd_read(struct mtd_inf
+ 	struct page *page;
+ 	int index = from >> PAGE_SHIFT;
+ 	int offset = from & (PAGE_SIZE-1);
+-	int cpylen;
++	int cpylen, err = 0;
++
++	read_lock(&dev->bdev_mutex);
++	if (!dev->blkdev || (from > mtd->size)) {
++		err = -EINVAL;
++		goto done;
++	}
+ 
+-	if (from > mtd->size)
+-		return -EINVAL;
+ 	if (from + len > mtd->size)
+ 		len = mtd->size - from;
+ 
+@@ -123,10 +139,14 @@ static int block2mtd_read(struct mtd_inf
+ 		len = len - cpylen;
+ 
+ 		page = page_read(dev->blkdev->bd_inode->i_mapping, index);
+-		if (!page)
+-			return -ENOMEM;
+-		if (IS_ERR(page))
+-			return PTR_ERR(page);
++		if (!page) {
++			err = -ENOMEM;
++			goto done;
++		}
++		if (IS_ERR(page)) {
++			err = PTR_ERR(page);
++			goto done;
++		}
+ 
+ 		memcpy(buf, page_address(page) + offset, cpylen);
+ 		page_cache_release(page);
+@@ -137,7 +157,10 @@ static int block2mtd_read(struct mtd_inf
+ 		offset = 0;
+ 		index++;
+ 	}
+-	return 0;
++
++done:
++	read_unlock(&dev->bdev_mutex);
++	return err;
+ }
+ 
+ 
+@@ -189,12 +212,22 @@ static int block2mtd_write(struct mtd_in
+ 		size_t *retlen, const u_char *buf)
+ {
+ 	struct block2mtd_dev *dev = mtd->priv;
+-	int err;
++	int err = 0;
++
++	read_lock(&dev->bdev_mutex);
++	if (!dev->blkdev) {
++		err = -EINVAL;
++		goto done;
++	}
+ 
+ 	if (!len)
+-		return 0;
+-	if (to >= mtd->size)
+-		return -ENOSPC;
++		goto done;
++
++	if (to >= mtd->size) {
++		err = -ENOSPC;
++		goto done;
++	}
++
+ 	if (to + len > mtd->size)
+ 		len = mtd->size - to;
+ 
+@@ -203,6 +236,9 @@ static int block2mtd_write(struct mtd_in
+ 	mutex_unlock(&dev->write_mutex);
+ 	if (err > 0)
+ 		err = 0;
++
++done:
++	read_unlock(&dev->bdev_mutex);
+ 	return err;
+ }
+ 
+@@ -211,52 +247,29 @@ static int block2mtd_write(struct mtd_in
+ static void block2mtd_sync(struct mtd_info *mtd)
+ {
+ 	struct block2mtd_dev *dev = mtd->priv;
+-	sync_blockdev(dev->blkdev);
+-	return;
+-}
+-
+-
+-static void block2mtd_free_device(struct block2mtd_dev *dev)
+-{
+-	if (!dev)
+-		return;
+-
+-	kfree(dev->mtd.name);
+ 
+-	if (dev->blkdev) {
+-		invalidate_mapping_pages(dev->blkdev->bd_inode->i_mapping,
+-					0, -1);
+-		close_bdev_exclusive(dev->blkdev, FMODE_READ|FMODE_WRITE);
+-	}
++	read_lock(&dev->bdev_mutex);
++	if (dev->blkdev)
++		sync_blockdev(dev->blkdev);
++	read_unlock(&dev->bdev_mutex);
+ 
+-	kfree(dev);
++	return;
+ }
+ 
+ 
+-/* FIXME: ensure that mtd->size % erase_size == 0 */
+-static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname)
++static int _open_bdev(struct block2mtd_dev *dev)
+ {
+ 	struct block_device *bdev;
+-	struct block2mtd_dev *dev;
+-	struct mtd_partition *part;
+-	char *name;
+-
+-	if (!devname)
+-		return NULL;
+-
+-	dev = kzalloc(sizeof(struct block2mtd_dev), GFP_KERNEL);
+-	if (!dev)
+-		return NULL;
+ 
+ 	/* Get a handle on the device */
+-	bdev = open_bdev_exclusive(devname, FMODE_READ|FMODE_WRITE, NULL);
++	bdev = open_bdev_exclusive(dev->devname, FMODE_READ|FMODE_WRITE, NULL);
+ #ifndef MODULE
+ 	if (IS_ERR(bdev)) {
+ 
+ 		/* We might not have rootfs mounted at this point. Try
+ 		   to resolve the device name by other means. */
+ 
+-		dev_t devt = name_to_dev_t(devname);
++		dev_t devt = name_to_dev_t(dev->devname);
+ 		if (devt) {
+ 			bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);
+ 		}
+@@ -264,17 +277,98 @@ static struct block2mtd_dev *add_device(
+ #endif
+ 
+ 	if (IS_ERR(bdev)) {
+-		ERROR("error: cannot open device %s", devname);
+-		goto devinit_err;
++		ERROR("error: cannot open device %s", dev->devname);
++		return 1;
+ 	}
+ 	dev->blkdev = bdev;
+ 
+ 	if (MAJOR(bdev->bd_dev) == MTD_BLOCK_MAJOR) {
+ 		ERROR("attempting to use an MTD device as a block device");
+-		goto devinit_err;
++		return 1;
+ 	}
+ 
++	return 0;
++}
++
++static void _close_bdev(struct block2mtd_dev *dev)
++{
++	struct block_device *bdev;
++
++	if (!dev->blkdev)
++		return;
++
++	bdev = dev->blkdev;
++	invalidate_mapping_pages(dev->blkdev->bd_inode->i_mapping, 0, -1);
++	close_bdev_exclusive(dev->blkdev, FMODE_READ|FMODE_WRITE);
++	dev->blkdev = NULL;
++}
++
++static void block2mtd_free_device(struct block2mtd_dev *dev)
++{
++	if (!dev)
++		return;
++
++	kfree(dev->mtd.name);
++	_close_bdev(dev);
++	kfree(dev);
++}
++
++
++static int block2mtd_refresh(struct mtd_info *mtd)
++{
++	struct block2mtd_dev *dev = mtd->priv;
++	struct block_device *bdev;
++	dev_t devt;
++	int err = 0;
++
++	/* no other mtd function can run at this point */
++	write_lock(&dev->bdev_mutex);
++
++	/* get the device number for the whole disk */
++	devt = MKDEV(MAJOR(dev->blkdev->bd_dev), 0);
++
++	/* close the old block device */
++	_close_bdev(dev);
++
++	/* open the whole disk, issue a partition rescan, then */
++	bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);
++	if (!bdev || !bdev->bd_disk)
++		err = -EINVAL;
++#ifndef CONFIG_MTD_BLOCK2MTD_MODULE
++	else
++		err = rescan_partitions(bdev->bd_disk, bdev);
++#endif
++	if (bdev)
++		close_bdev_exclusive(bdev, FMODE_READ|FMODE_WRITE);
++
++	/* try to open the partition block device again */
++	_open_bdev(dev);
++	write_unlock(&dev->bdev_mutex);
++
++	return err;
++}
++
++/* FIXME: ensure that mtd->size % erase_size == 0 */
++static struct block2mtd_dev *add_device(char *devname, int erase_size, char *mtdname)
++{
++	struct block2mtd_dev *dev;
++	struct mtd_partition *part;
++	char *name;
++
++	if (!devname)
++		return NULL;
++
++	dev = kzalloc(sizeof(struct block2mtd_dev) + strlen(devname) + 1, GFP_KERNEL);
++	if (!dev)
++		return NULL;
++
++	strcpy(dev->devname, devname);
++
++	if (_open_bdev(dev))
++		goto devinit_err;
++
+ 	mutex_init(&dev->write_mutex);
++	rwlock_init(&dev->bdev_mutex);
+ 
+ 	if (!mtdname)
+ 		mtdname = devname;
+@@ -298,6 +392,7 @@ static struct block2mtd_dev *add_device(
+ 	dev->mtd.read = block2mtd_read;
+ 	dev->mtd.priv = dev;
+ 	dev->mtd.owner = THIS_MODULE;
++	dev->mtd.refresh_device = block2mtd_refresh;
+ 
+ 	part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
+ 	part->name = dev->mtd.name;
+--- a/drivers/mtd/mtdchar.c
++++ b/drivers/mtd/mtdchar.c
+@@ -18,6 +18,7 @@
+ 
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/compatmac.h>
++#include <linux/mtd/partitions.h>
+ 
+ #include <asm/uaccess.h>
+ 
+@@ -814,6 +815,13 @@ static int mtd_ioctl(struct inode *inode
+ 		file->f_pos = 0;
+ 		break;
+ 	}
++#ifdef CONFIG_MTD_PARTITIONS
++	case MTDREFRESH:
++	{
++		ret = refresh_mtd_partitions(mtd);
++		break;
++	}
++#endif
+ 
+ 	default:
+ 		ret = -ENOTTY;
+--- a/include/linux/mtd/mtd.h
++++ b/include/linux/mtd/mtd.h
+@@ -101,6 +101,7 @@ struct mtd_oob_ops {
+ 	uint8_t		*oobbuf;
+ };
+ 
++struct mtd_info;
+ struct mtd_info {
+ 	u_char type;
+ 	uint32_t flags;
+@@ -241,6 +242,9 @@ struct mtd_info {
+ 	struct device dev;
+ 	int usecount;
+ 
++	int (*refresh_device)(struct mtd_info *mtd);
++	struct mtd_info *split;
++
+ 	/* If the driver is something smart, like UBI, it may need to maintain
+ 	 * its own reference counting. The below functions are only for driver.
+ 	 * The driver may register its callbacks. These callbacks are not
+--- a/include/linux/mtd/partitions.h
++++ b/include/linux/mtd/partitions.h
+@@ -34,12 +34,14 @@
+  * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK).
+  */
+ 
++struct mtd_partition;
+ struct mtd_partition {
+ 	char *name;			/* identifier string */
+ 	uint64_t size;			/* partition size */
+ 	uint64_t offset;		/* offset within the master MTD space */
+ 	uint32_t mask_flags;		/* master MTD flags to mask out for this partition */
+ 	struct nand_ecclayout *ecclayout;	/* out of band layout for this partition (NAND only)*/
++	int (*refresh_partition)(struct mtd_info *);
+ };
+ 
+ #define MTDPART_OFS_NXTBLK	(-2)
+@@ -51,6 +53,7 @@ struct mtd_info;
+ 
+ int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
+ int del_mtd_partitions(struct mtd_info *);
++int refresh_mtd_partitions(struct mtd_info *);
+ 
+ /*
+  * Functions dealing with the various ways of partitioning the space
+--- a/include/mtd/mtd-abi.h
++++ b/include/mtd/mtd-abi.h
+@@ -110,6 +110,7 @@ struct otp_info {
+ #define MEMERASE64		_IOW('M', 20, struct erase_info_user64)
+ #define MEMWRITEOOB64		_IOWR('M', 21, struct mtd_oob_buf64)
+ #define MEMREADOOB64		_IOWR('M', 22, struct mtd_oob_buf64)
++#define MTDREFRESH		_IO('M', 23)
+ 
+ /*
+  * Obsolete legacy interface. Keep it in order not to break userspace
diff --git a/target/linux/generic/patches-2.6.35/066-block2mtd_probe.patch b/target/linux/generic/patches-2.6.35/066-block2mtd_probe.patch
new file mode 100644
index 0000000000..4cc7ef517c
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/066-block2mtd_probe.patch
@@ -0,0 +1,10 @@
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -269,6 +269,7 @@ static int _open_bdev(struct block2mtd_d
+ 		/* We might not have rootfs mounted at this point. Try
+ 		   to resolve the device name by other means. */
+ 
++		wait_for_device_probe();
+ 		dev_t devt = name_to_dev_t(dev->devname);
+ 		if (devt) {
+ 			bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);
diff --git a/target/linux/generic/patches-2.6.35/070-redboot_space.patch b/target/linux/generic/patches-2.6.35/070-redboot_space.patch
new file mode 100644
index 0000000000..6ace83c01a
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/070-redboot_space.patch
@@ -0,0 +1,30 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -249,14 +249,21 @@ static int parse_redboot_partitions(stru
+ #endif
+ 		names += strlen(names)+1;
+ 
+-#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+ 		if(fl->next && fl->img->flash_base + fl->img->size + master->erasesize <= fl->next->img->flash_base) {
+-			i++;
+-			parts[i].offset = parts[i-1].size + parts[i-1].offset;
+-			parts[i].size = fl->next->img->flash_base - parts[i].offset;
+-			parts[i].name = nullname;
+-		}
++			if (!strcmp(parts[i].name, "rootfs")) {
++				parts[i].size = fl->next->img->flash_base;
++				parts[i].size &= ~(master->erasesize - 1);
++				parts[i].size -= parts[i].offset;
++#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
++				nrparts--;
++			} else {
++				i++;
++				parts[i].offset = parts[i-1].size + parts[i-1].offset;
++				parts[i].size = fl->next->img->flash_base - parts[i].offset;
++				parts[i].name = nullname;
+ #endif
++			}
++		}
+ 		tmp_fl = fl;
+ 		fl = fl->next;
+ 		kfree(tmp_fl);
diff --git a/target/linux/generic/patches-2.6.35/071-redboot_boardconfig.patch b/target/linux/generic/patches-2.6.35/071-redboot_boardconfig.patch
new file mode 100644
index 0000000000..f9bc4fe36b
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/071-redboot_boardconfig.patch
@@ -0,0 +1,60 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -11,6 +11,8 @@
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+ 
++#define BOARD_CONFIG_PART		"boardconfig"
++
+ struct fis_image_desc {
+     unsigned char name[16];      // Null terminated name
+     uint32_t	  flash_base;    // Address within FLASH of image
+@@ -41,6 +43,7 @@ static int parse_redboot_partitions(stru
+                              struct mtd_partition **pparts,
+                              unsigned long fis_origin)
+ {
++	unsigned long max_offset = 0;
+ 	int nrparts = 0;
+ 	struct fis_image_desc *buf;
+ 	struct mtd_partition *parts;
+@@ -209,14 +212,14 @@ static int parse_redboot_partitions(stru
+ 		}
+ 	}
+ #endif
+-	parts = kzalloc(sizeof(*parts)*nrparts + nulllen + namelen, GFP_KERNEL);
++	parts = kzalloc(sizeof(*parts) * (nrparts + 1) + nulllen + namelen + sizeof(BOARD_CONFIG_PART), GFP_KERNEL);
+ 
+ 	if (!parts) {
+ 		ret = -ENOMEM;
+ 		goto out;
+ 	}
+ 
+-	nullname = (char *)&parts[nrparts];
++	nullname = (char *)&parts[nrparts + 1];
+ #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+ 	if (nulllen > 0) {
+ 		strcpy(nullname, nullstring);
+@@ -235,6 +238,8 @@ static int parse_redboot_partitions(stru
+ 	}
+ #endif
+ 	for ( ; i<nrparts; i++) {
++		if(max_offset < buf[i].flash_base + buf[i].size)
++			max_offset = buf[i].flash_base + buf[i].size;
+ 		parts[i].size = fl->img->size;
+ 		parts[i].offset = fl->img->flash_base;
+ 		parts[i].name = names;
+@@ -268,6 +273,14 @@ static int parse_redboot_partitions(stru
+ 		fl = fl->next;
+ 		kfree(tmp_fl);
+ 	}
++	if(master->size - max_offset >= master->erasesize)
++	{
++		parts[nrparts].size = master->size - max_offset;
++		parts[nrparts].offset = max_offset;
++		parts[nrparts].name = names;
++		strcpy(names, BOARD_CONFIG_PART);
++		nrparts++;
++	}
+ 	ret = nrparts;
+ 	*pparts = parts;
+  out:
diff --git a/target/linux/generic/patches-2.6.35/080-mtd_plat_nand_chip_fixup.patch b/target/linux/generic/patches-2.6.35/080-mtd_plat_nand_chip_fixup.patch
new file mode 100644
index 0000000000..6ea82d96aa
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/080-mtd_plat_nand_chip_fixup.patch
@@ -0,0 +1,32 @@
+--- a/include/linux/mtd/nand.h
++++ b/include/linux/mtd/nand.h
+@@ -491,6 +491,7 @@ struct platform_nand_chip {
+ 	int			chip_delay;
+ 	unsigned int		options;
+ 	const char		**part_probe_types;
++	int			(*chip_fixup)(struct mtd_info *mtd);
+ 	void			(*set_parts)(uint64_t size,
+ 					struct platform_nand_chip *chip);
+ 	void			*priv;
+--- a/drivers/mtd/nand/plat_nand.c
++++ b/drivers/mtd/nand/plat_nand.c
+@@ -91,7 +91,18 @@ static int __devinit plat_nand_probe(str
+ 	}
+ 
+ 	/* Scan to find existance of the device */
+-	if (nand_scan(&data->mtd, 1)) {
++	if (nand_scan_ident(&data->mtd, 1, NULL)) {
++		res = -ENXIO;
++		goto out;
++	}
++
++	if (pdata->chip.chip_fixup) {
++		res = pdata->chip.chip_fixup(&data->mtd);
++		if (res)
++			goto out;
++	}
++
++	if (nand_scan_tail(&data->mtd)) {
+ 		err = -ENXIO;
+ 		goto out;
+ 	}
diff --git a/target/linux/generic/patches-2.6.35/081-mtd_myloader_partition_parser.patch b/target/linux/generic/patches-2.6.35/081-mtd_myloader_partition_parser.patch
new file mode 100644
index 0000000000..61b822ee88
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/081-mtd_myloader_partition_parser.patch
@@ -0,0 +1,35 @@
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -181,6 +181,22 @@ config MTD_AR7_PARTS
+ 	---help---
+ 	  TI AR7 partitioning support
+ 
++config MTD_MYLOADER_PARTS
++	tristate "MyLoader partition parsing"
++	depends on MTD_PARTITIONS && (ADM5120 || ATHEROS_AR231X || ATHEROS_AR71XX)
++	---help---
++	  MyLoader is a bootloader which allows the user to define partitions
++	  in flash devices, by putting a table in the second erase block
++	  on the device, similar to a partition table. This table gives the 
++	  offsets and lengths of the user defined partitions.
++
++	  If you need code which can detect and parse these tables, and
++	  register MTD 'partitions' corresponding to each image detected,
++	  enable this option.
++
++	  You will still need the parsing functions to be called by the driver
++	  for your particular device. It won't happen automatically.
++
+ comment "User Modules And Translation Layers"
+ 
+ config MTD_CHAR
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdli
+ obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
+ obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
+ obj-$(CONFIG_MTD_OF_PARTS)      += ofpart.o
++obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+ 
+ # 'Users' - code which presents functionality to userspace.
+ obj-$(CONFIG_MTD_CHAR)		+= mtdchar.o
diff --git a/target/linux/generic/patches-2.6.35/082-mtd_info_move_forward_decl.patch b/target/linux/generic/patches-2.6.35/082-mtd_info_move_forward_decl.patch
new file mode 100644
index 0000000000..13f0a217d4
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/082-mtd_info_move_forward_decl.patch
@@ -0,0 +1,18 @@
+--- a/include/linux/mtd/partitions.h
++++ b/include/linux/mtd/partitions.h
+@@ -33,6 +33,7 @@
+  * Note: writeable partitions require their size and offset be
+  * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK).
+  */
++struct mtd_info;
+ 
+ struct mtd_partition;
+ struct mtd_partition {
+@@ -49,7 +50,6 @@ struct mtd_partition {
+ #define MTDPART_SIZ_FULL	(0)
+ 
+ 
+-struct mtd_info;
+ 
+ int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
+ int del_mtd_partitions(struct mtd_info *);
diff --git a/target/linux/generic/patches-2.6.35/083-mtd_fix_nand_correct_data_return_code.patch b/target/linux/generic/patches-2.6.35/083-mtd_fix_nand_correct_data_return_code.patch
new file mode 100644
index 0000000000..f630059e87
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/083-mtd_fix_nand_correct_data_return_code.patch
@@ -0,0 +1,12 @@
+--- a/drivers/mtd/nand/nand_ecc.c
++++ b/drivers/mtd/nand/nand_ecc.c
+@@ -507,8 +507,7 @@ int __nand_correct_data(unsigned char *b
+ 	if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1)
+ 		return 1;	/* error in ecc data; no action needed */
+ 
+-	printk(KERN_ERR "uncorrectable error : ");
+-	return -1;
++	return -EBADMSG;
+ }
+ EXPORT_SYMBOL(__nand_correct_data);
+ 
diff --git a/target/linux/generic/patches-2.6.35/084-mtd_m25p80_add_pm25lv_flash_support.patch b/target/linux/generic/patches-2.6.35/084-mtd_m25p80_add_pm25lv_flash_support.patch
new file mode 100644
index 0000000000..96a5bd0132
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/084-mtd_m25p80_add_pm25lv_flash_support.patch
@@ -0,0 +1,13 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -646,6 +646,10 @@ static const struct spi_device_id m25p_i
+ 	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
+ 	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
+ 
++	/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
++	{ "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K) },
++	{ "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K) },
++
+ 	/* Spansion -- single (large) sector size only, at least
+ 	 * for the chips listed here (without boot sectors).
+ 	 */
diff --git a/target/linux/generic/patches-2.6.35/085-mtd_m25p80_add_en25pxx_support.patch b/target/linux/generic/patches-2.6.35/085-mtd_m25p80_add_en25pxx_support.patch
new file mode 100644
index 0000000000..9235e6ee16
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/085-mtd_m25p80_add_en25pxx_support.patch
@@ -0,0 +1,13 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -646,6 +646,10 @@ static const struct spi_device_id m25p_i
+ 	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
+ 	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
+ 
++	/* EON -- en25pxx */
++	{ "en25p32", INFO(0x1c2016, 0, 64 * 1024,  64, 0) },
++	{ "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
++
+ 	/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
+ 	{ "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K) },
+ 	{ "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K) },
diff --git a/target/linux/generic/patches-2.6.35/086-mtd_m25p80_add_xxxs33b_support.patch b/target/linux/generic/patches-2.6.35/086-mtd_m25p80_add_xxxs33b_support.patch
new file mode 100644
index 0000000000..293ed8bdb6
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/086-mtd_m25p80_add_xxxs33b_support.patch
@@ -0,0 +1,28 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -650,6 +650,11 @@ static const struct spi_device_id m25p_i
+ 	{ "en25p32", INFO(0x1c2016, 0, 64 * 1024,  64, 0) },
+ 	{ "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
+ 
++	/* Numonyx -- xxxs33b */
++	{ "160s33b",  INFO(0x898911, 0, 64 * 1024,  64, 0) },
++	{ "320s33b",  INFO(0x898912, 0, 64 * 1024, 128, 0) },
++	{ "640s33b",  INFO(0x898913, 0, 64 * 1024, 256, 0) },
++
+ 	/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
+ 	{ "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K) },
+ 	{ "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K) },
+@@ -834,11 +839,12 @@ static int __devinit m25p_probe(struct s
+ 	dev_set_drvdata(&spi->dev, flash);
+ 
+ 	/*
+-	 * Atmel and SST serial flash tend to power
++	 * Atmel, SST and Intel/Numonyx serial flash tend to power
+ 	 * up with the software protection bits set
+ 	 */
+ 
+ 	if (info->jedec_id >> 16 == 0x1f ||
++	    info->jedec_id >> 16 == 0x89 ||
+ 	    info->jedec_id >> 16 == 0xbf) {
+ 		write_enable(flash);
+ 		write_sr(flash, 0);
diff --git a/target/linux/generic/patches-2.6.35/087-mtd-m25p80-add-w25q32-chip-support.patch b/target/linux/generic/patches-2.6.35/087-mtd-m25p80-add-w25q32-chip-support.patch
new file mode 100644
index 0000000000..34dfdbd894
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/087-mtd-m25p80-add-w25q32-chip-support.patch
@@ -0,0 +1,10 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -707,6 +707,7 @@ static const struct spi_device_id m25p_i
+ 	{ "w25x80", INFO(0xef3014, 0, 64 * 1024,  16, SECT_4K) },
+ 	{ "w25x16", INFO(0xef3015, 0, 64 * 1024,  32, SECT_4K) },
+ 	{ "w25x32", INFO(0xef3016, 0, 64 * 1024,  64, SECT_4K) },
++	{ "w25q32", INFO(0xef4016, 0, 64 * 1024,  64, SECT_4K) },
+ 	{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
+ 
+ 	/* Catalyst / On Semiconductor -- non-JEDEC */
diff --git a/target/linux/generic/patches-2.6.35/089-mtd-samsung-flash.patch b/target/linux/generic/patches-2.6.35/089-mtd-samsung-flash.patch
new file mode 100644
index 0000000000..7cb4efdffc
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/089-mtd-samsung-flash.patch
@@ -0,0 +1,37 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -374,9 +374,32 @@ static void cfi_fixup_major_minor(struct
+ {
+ 	// manufacturers defined in include/linux/mtd/cfi.h
+ 
+-	if (cfi->mfr == CFI_MFR_SAMSUNG && cfi->id == 0x257e &&
+-	    extp->MajorVersion == '0')
++	if (cfi->mfr == CFI_MFR_SAMSUNG &&
++	    extp->MajorVersion == '0') {
++		printk("  Fixed Samsung's Amd/Fujitsu Extended Query version from %c.%c",
++		       extp->MajorVersion, extp->MinorVersion);
++
+ 		extp->MajorVersion = '1';
++		extp->MinorVersion = '0';
++
++		printk(" to %c.%c.\n",
++		       extp->MajorVersion, extp->MinorVersion);
++	}
++
++	if (cfi->mfr == CFI_MFR_SAMSUNG &&
++	    extp->MajorVersion == '3' && extp->MinorVersion == '3') {
++		printk(KERN_NOTICE "  Newer Samsung flash detected, "
++		       "should be compatibile with Amd/Fujitsu.\n");
++
++		printk("  Fixed Samsung's Amd/Fujitsu Extended Query version from %c.%c",
++		       extp->MajorVersion, extp->MinorVersion);
++
++		extp->MajorVersion = '1';	// set to 1.3 (last defined version)
++		extp->MinorVersion = '3';
++
++		printk(" to %c.%c.\n",
++		       extp->MajorVersion, extp->MinorVersion);
++	}
+ }
+ 
+ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)
diff --git a/target/linux/generic/patches-2.6.35/100-netfilter_layer7_2.21.patch b/target/linux/generic/patches-2.6.35/100-netfilter_layer7_2.21.patch
new file mode 100644
index 0000000000..fa1274c3b9
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/100-netfilter_layer7_2.21.patch
@@ -0,0 +1,2132 @@
+--- /dev/null
++++ b/include/linux/netfilter/xt_layer7.h
+@@ -0,0 +1,13 @@
++#ifndef _XT_LAYER7_H
++#define _XT_LAYER7_H
++
++#define MAX_PATTERN_LEN 8192
++#define MAX_PROTOCOL_LEN 256
++
++struct xt_layer7_info {
++    char protocol[MAX_PROTOCOL_LEN];
++    char pattern[MAX_PATTERN_LEN];
++    u_int8_t invert;
++};
++
++#endif /* _XT_LAYER7_H */
+--- a/include/net/netfilter/nf_conntrack.h
++++ b/include/net/netfilter/nf_conntrack.h
+@@ -116,6 +116,22 @@ struct nf_conn {
+ 	u_int32_t secmark;
+ #endif
+ 
++#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || \
++    defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++	struct {
++		/*
++		 * e.g. "http". NULL before decision. "unknown" after decision
++		 * if no match.
++		 */
++		char *app_proto;
++		/*
++		 * application layer data so far. NULL after match decision.
++		 */
++		char *app_data;
++		unsigned int app_data_len;
++	} layer7;
++#endif
++
+ 	/* Storage reserved for other modules: */
+ 	union nf_conntrack_proto proto;
+ 
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -921,6 +921,27 @@ config NETFILTER_XT_MATCH_STATE
+ 
+ 	  To compile it as a module, choose M here.  If unsure, say N.
+ 
++config NETFILTER_XT_MATCH_LAYER7
++	tristate '"layer7" match support'
++	depends on NETFILTER_XTABLES
++	depends on EXPERIMENTAL && (IP_NF_CONNTRACK || NF_CONNTRACK)
++       depends on NF_CT_ACCT
++	help
++	  Say Y if you want to be able to classify connections (and their
++	  packets) based on regular expression matching of their application
++	  layer data.   This is one way to classify applications such as
++	  peer-to-peer filesharing systems that do not always use the same
++	  port.
++
++	  To compile it as a module, choose M here.  If unsure, say N.
++
++config NETFILTER_XT_MATCH_LAYER7_DEBUG
++        bool 'Layer 7 debugging output'
++        depends on NETFILTER_XT_MATCH_LAYER7
++        help
++          Say Y to get lots of debugging output.
++
++
+ config NETFILTER_XT_MATCH_STATISTIC
+ 	tristate '"statistic" match support'
+ 	depends on NETFILTER_ADVANCED
+--- a/net/netfilter/Makefile
++++ b/net/netfilter/Makefile
+@@ -91,6 +91,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_RECENT) 
+ obj-$(CONFIG_NETFILTER_XT_MATCH_SCTP) += xt_sctp.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_SOCKET) += xt_socket.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STATE) += xt_state.o
++obj-$(CONFIG_NETFILTER_XT_MATCH_LAYER7) += xt_layer7.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STATISTIC) += xt_statistic.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_STRING) += xt_string.o
+ obj-$(CONFIG_NETFILTER_XT_MATCH_TCPMSS) += xt_tcpmss.o
+--- a/net/netfilter/nf_conntrack_core.c
++++ b/net/netfilter/nf_conntrack_core.c
+@@ -202,6 +202,14 @@ destroy_conntrack(struct nf_conntrack *n
+ 	 * too. */
+ 	nf_ct_remove_expectations(ct);
+ 
++	#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++	if(ct->layer7.app_proto)
++		kfree(ct->layer7.app_proto);
++	if(ct->layer7.app_data)
++	kfree(ct->layer7.app_data);
++	#endif
++
++
+ 	/* We overload first tuple to link into unconfirmed list. */
+ 	if (!nf_ct_is_confirmed(ct)) {
+ 		BUG_ON(hlist_nulls_unhashed(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode));
+--- a/net/netfilter/nf_conntrack_standalone.c
++++ b/net/netfilter/nf_conntrack_standalone.c
+@@ -178,6 +178,12 @@ static int ct_seq_show(struct seq_file *
+ 		goto release;
+ #endif
+ 
++#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
++	if(ct->layer7.app_proto &&
++           seq_printf(s, "l7proto=%s ", ct->layer7.app_proto))
++		return -ENOSPC;
++#endif
++
+ 	if (seq_printf(s, "use=%u\n", atomic_read(&ct->ct_general.use)))
+ 		goto release;
+ 
+--- /dev/null
++++ b/net/netfilter/regexp/regexp.c
+@@ -0,0 +1,1197 @@
++/*
++ * regcomp and regexec -- regsub and regerror are elsewhere
++ * @(#)regexp.c	1.3 of 18 April 87
++ *
++ *	Copyright (c) 1986 by University of Toronto.
++ *	Written by Henry Spencer.  Not derived from licensed software.
++ *
++ *	Permission is granted to anyone to use this software for any
++ *	purpose on any computer system, and to redistribute it freely,
++ *	subject to the following restrictions:
++ *
++ *	1. The author is not responsible for the consequences of use of
++ *		this software, no matter how awful, even if they arise
++ *		from defects in it.
++ *
++ *	2. The origin of this software must not be misrepresented, either
++ *		by explicit claim or by omission.
++ *
++ *	3. Altered versions must be plainly marked as such, and must not
++ *		be misrepresented as being the original software.
++ *
++ * Beware that some of this code is subtly aware of the way operator
++ * precedence is structured in regular expressions.  Serious changes in
++ * regular-expression syntax might require a total rethink.
++ *
++ * This code was modified by Ethan Sommer to work within the kernel
++ * (it now uses kmalloc etc..)
++ *
++ * Modified slightly by Matthew Strait to use more modern C.
++ */
++
++#include "regexp.h"
++#include "regmagic.h"
++
++/* added by ethan and matt.  Lets it work in both kernel and user space.
++(So iptables can use it, for instance.)  Yea, it goes both ways... */
++#if __KERNEL__
++  #define malloc(foo) kmalloc(foo,GFP_ATOMIC)
++#else
++  #define printk(format,args...) printf(format,##args)
++#endif
++
++void regerror(char * s)
++{
++        printk("<3>Regexp: %s\n", s);
++        /* NOTREACHED */
++}
++
++/*
++ * The "internal use only" fields in regexp.h are present to pass info from
++ * compile to execute that permits the execute phase to run lots faster on
++ * simple cases.  They are:
++ *
++ * regstart	char that must begin a match; '\0' if none obvious
++ * reganch	is the match anchored (at beginning-of-line only)?
++ * regmust	string (pointer into program) that match must include, or NULL
++ * regmlen	length of regmust string
++ *
++ * Regstart and reganch permit very fast decisions on suitable starting points
++ * for a match, cutting down the work a lot.  Regmust permits fast rejection
++ * of lines that cannot possibly match.  The regmust tests are costly enough
++ * that regcomp() supplies a regmust only if the r.e. contains something
++ * potentially expensive (at present, the only such thing detected is * or +
++ * at the start of the r.e., which can involve a lot of backup).  Regmlen is
++ * supplied because the test in regexec() needs it and regcomp() is computing
++ * it anyway.
++ */
++
++/*
++ * Structure for regexp "program".  This is essentially a linear encoding
++ * of a nondeterministic finite-state machine (aka syntax charts or
++ * "railroad normal form" in parsing technology).  Each node is an opcode
++ * plus a "next" pointer, possibly plus an operand.  "Next" pointers of
++ * all nodes except BRANCH implement concatenation; a "next" pointer with
++ * a BRANCH on both ends of it is connecting two alternatives.  (Here we
++ * have one of the subtle syntax dependencies:  an individual BRANCH (as
++ * opposed to a collection of them) is never concatenated with anything
++ * because of operator precedence.)  The operand of some types of node is
++ * a literal string; for others, it is a node leading into a sub-FSM.  In
++ * particular, the operand of a BRANCH node is the first node of the branch.
++ * (NB this is *not* a tree structure:  the tail of the branch connects
++ * to the thing following the set of BRANCHes.)  The opcodes are:
++ */
++
++/* definition	number	opnd?	meaning */
++#define	END	0	/* no	End of program. */
++#define	BOL	1	/* no	Match "" at beginning of line. */
++#define	EOL	2	/* no	Match "" at end of line. */
++#define	ANY	3	/* no	Match any one character. */
++#define	ANYOF	4	/* str	Match any character in this string. */
++#define	ANYBUT	5	/* str	Match any character not in this string. */
++#define	BRANCH	6	/* node	Match this alternative, or the next... */
++#define	BACK	7	/* no	Match "", "next" ptr points backward. */
++#define	EXACTLY	8	/* str	Match this string. */
++#define	NOTHING	9	/* no	Match empty string. */
++#define	STAR	10	/* node	Match this (simple) thing 0 or more times. */
++#define	PLUS	11	/* node	Match this (simple) thing 1 or more times. */
++#define	OPEN	20	/* no	Mark this point in input as start of #n. */
++			/*	OPEN+1 is number 1, etc. */
++#define	CLOSE	30	/* no	Analogous to OPEN. */
++
++/*
++ * Opcode notes:
++ *
++ * BRANCH	The set of branches constituting a single choice are hooked
++ *		together with their "next" pointers, since precedence prevents
++ *		anything being concatenated to any individual branch.  The
++ *		"next" pointer of the last BRANCH in a choice points to the
++ *		thing following the whole choice.  This is also where the
++ *		final "next" pointer of each individual branch points; each
++ *		branch starts with the operand node of a BRANCH node.
++ *
++ * BACK		Normal "next" pointers all implicitly point forward; BACK
++ *		exists to make loop structures possible.
++ *
++ * STAR,PLUS	'?', and complex '*' and '+', are implemented as circular
++ *		BRANCH structures using BACK.  Simple cases (one character
++ *		per match) are implemented with STAR and PLUS for speed
++ *		and to minimize recursive plunges.
++ *
++ * OPEN,CLOSE	...are numbered at compile time.
++ */
++
++/*
++ * A node is one char of opcode followed by two chars of "next" pointer.
++ * "Next" pointers are stored as two 8-bit pieces, high order first.  The
++ * value is a positive offset from the opcode of the node containing it.
++ * An operand, if any, simply follows the node.  (Note that much of the
++ * code generation knows about this implicit relationship.)
++ *
++ * Using two bytes for the "next" pointer is vast overkill for most things,
++ * but allows patterns to get big without disasters.
++ */
++#define	OP(p)	(*(p))
++#define	NEXT(p)	(((*((p)+1)&0377)<<8) + (*((p)+2)&0377))
++#define	OPERAND(p)	((p) + 3)
++
++/*
++ * See regmagic.h for one further detail of program structure.
++ */
++
++
++/*
++ * Utility definitions.
++ */
++#ifndef CHARBITS
++#define	UCHARAT(p)	((int)*(unsigned char *)(p))
++#else
++#define	UCHARAT(p)	((int)*(p)&CHARBITS)
++#endif
++
++#define	FAIL(m)	{ regerror(m); return(NULL); }
++#define	ISMULT(c)	((c) == '*' || (c) == '+' || (c) == '?')
++#define	META	"^$.[()|?+*\\"
++
++/*
++ * Flags to be passed up and down.
++ */
++#define	HASWIDTH	01	/* Known never to match null string. */
++#define	SIMPLE		02	/* Simple enough to be STAR/PLUS operand. */
++#define	SPSTART		04	/* Starts with * or +. */
++#define	WORST		0	/* Worst case. */
++
++/*
++ * Global work variables for regcomp().
++ */
++struct match_globals {
++char *reginput;		/* String-input pointer. */
++char *regbol;		/* Beginning of input, for ^ check. */
++char **regstartp;	/* Pointer to startp array. */
++char **regendp;		/* Ditto for endp. */
++char *regparse;		/* Input-scan pointer. */
++int regnpar;		/* () count. */
++char regdummy;
++char *regcode;		/* Code-emit pointer; &regdummy = don't. */
++long regsize;		/* Code size. */
++};
++
++/*
++ * Forward declarations for regcomp()'s friends.
++ */
++#ifndef STATIC
++#define	STATIC	static
++#endif
++STATIC char *reg(struct match_globals *g, int paren,int *flagp);
++STATIC char *regbranch(struct match_globals *g, int *flagp);
++STATIC char *regpiece(struct match_globals *g, int *flagp);
++STATIC char *regatom(struct match_globals *g, int *flagp);
++STATIC char *regnode(struct match_globals *g, char op);
++STATIC char *regnext(struct match_globals *g, char *p);
++STATIC void regc(struct match_globals *g, char b);
++STATIC void reginsert(struct match_globals *g, char op, char *opnd);
++STATIC void regtail(struct match_globals *g, char *p, char *val);
++STATIC void regoptail(struct match_globals *g, char *p, char *val);
++
++
++__kernel_size_t my_strcspn(const char *s1,const char *s2)
++{
++        char *scan1;
++        char *scan2;
++        int count;
++
++        count = 0;
++        for (scan1 = (char *)s1; *scan1 != '\0'; scan1++) {
++                for (scan2 = (char *)s2; *scan2 != '\0';)       /* ++ moved down. */
++                        if (*scan1 == *scan2++)
++                                return(count);
++                count++;
++        }
++        return(count);
++}
++
++/*
++ - regcomp - compile a regular expression into internal code
++ *
++ * We can't allocate space until we know how big the compiled form will be,
++ * but we can't compile it (and thus know how big it is) until we've got a
++ * place to put the code.  So we cheat:  we compile it twice, once with code
++ * generation turned off and size counting turned on, and once "for real".
++ * This also means that we don't allocate space until we are sure that the
++ * thing really will compile successfully, and we never have to move the
++ * code and thus invalidate pointers into it.  (Note that it has to be in
++ * one piece because free() must be able to free it all.)
++ *
++ * Beware that the optimization-preparation code in here knows about some
++ * of the structure of the compiled regexp.
++ */
++regexp *
++regcomp(char *exp,int *patternsize)
++{
++	register regexp *r;
++	register char *scan;
++	register char *longest;
++	register int len;
++	int flags;
++	struct match_globals g;
++	
++	/* commented out by ethan
++	   extern char *malloc();
++	*/
++
++	if (exp == NULL)
++		FAIL("NULL argument");
++
++	/* First pass: determine size, legality. */
++	g.regparse = exp;
++	g.regnpar = 1;
++	g.regsize = 0L;
++	g.regcode = &g.regdummy;
++	regc(&g, MAGIC);
++	if (reg(&g, 0, &flags) == NULL)
++		return(NULL);
++
++	/* Small enough for pointer-storage convention? */
++	if (g.regsize >= 32767L)		/* Probably could be 65535L. */
++		FAIL("regexp too big");
++
++	/* Allocate space. */
++	*patternsize=sizeof(regexp) + (unsigned)g.regsize;
++	r = (regexp *)malloc(sizeof(regexp) + (unsigned)g.regsize);
++	if (r == NULL)
++		FAIL("out of space");
++
++	/* Second pass: emit code. */
++	g.regparse = exp;
++	g.regnpar = 1;
++	g.regcode = r->program;
++	regc(&g, MAGIC);
++	if (reg(&g, 0, &flags) == NULL)
++		return(NULL);
++
++	/* Dig out information for optimizations. */
++	r->regstart = '\0';	/* Worst-case defaults. */
++	r->reganch = 0;
++	r->regmust = NULL;
++	r->regmlen = 0;
++	scan = r->program+1;			/* First BRANCH. */
++	if (OP(regnext(&g, scan)) == END) {		/* Only one top-level choice. */
++		scan = OPERAND(scan);
++
++		/* Starting-point info. */
++		if (OP(scan) == EXACTLY)
++			r->regstart = *OPERAND(scan);
++		else if (OP(scan) == BOL)
++			r->reganch++;
++
++		/*
++		 * If there's something expensive in the r.e., find the
++		 * longest literal string that must appear and make it the
++		 * regmust.  Resolve ties in favor of later strings, since
++		 * the regstart check works with the beginning of the r.e.
++		 * and avoiding duplication strengthens checking.  Not a
++		 * strong reason, but sufficient in the absence of others.
++		 */
++		if (flags&SPSTART) {
++			longest = NULL;
++			len = 0;
++			for (; scan != NULL; scan = regnext(&g, scan))
++				if (OP(scan) == EXACTLY && strlen(OPERAND(scan)) >= len) {
++					longest = OPERAND(scan);
++					len = strlen(OPERAND(scan));
++				}
++			r->regmust = longest;
++			r->regmlen = len;
++		}
++	}
++
++	return(r);
++}
++
++/*
++ - reg - regular expression, i.e. main body or parenthesized thing
++ *
++ * Caller must absorb opening parenthesis.
++ *
++ * Combining parenthesis handling with the base level of regular expression
++ * is a trifle forced, but the need to tie the tails of the branches to what
++ * follows makes it hard to avoid.
++ */
++static char *
++reg(struct match_globals *g, int paren, int *flagp /* Parenthesized? */ )
++{
++	register char *ret;
++	register char *br;
++	register char *ender;
++	register int parno = 0; /* 0 makes gcc happy */
++	int flags;
++
++	*flagp = HASWIDTH;	/* Tentatively. */
++
++	/* Make an OPEN node, if parenthesized. */
++	if (paren) {
++		if (g->regnpar >= NSUBEXP)
++			FAIL("too many ()");
++		parno = g->regnpar;
++		g->regnpar++;
++		ret = regnode(g, OPEN+parno);
++	} else
++		ret = NULL;
++
++	/* Pick up the branches, linking them together. */
++	br = regbranch(g, &flags);
++	if (br == NULL)
++		return(NULL);
++	if (ret != NULL)
++		regtail(g, ret, br);	/* OPEN -> first. */
++	else
++		ret = br;
++	if (!(flags&HASWIDTH))
++		*flagp &= ~HASWIDTH;
++	*flagp |= flags&SPSTART;
++	while (*g->regparse == '|') {
++		g->regparse++;
++		br = regbranch(g, &flags);
++		if (br == NULL)
++			return(NULL);
++		regtail(g, ret, br);	/* BRANCH -> BRANCH. */
++		if (!(flags&HASWIDTH))
++			*flagp &= ~HASWIDTH;
++		*flagp |= flags&SPSTART;
++	}
++
++	/* Make a closing node, and hook it on the end. */
++	ender = regnode(g, (paren) ? CLOSE+parno : END);	
++	regtail(g, ret, ender);
++
++	/* Hook the tails of the branches to the closing node. */
++	for (br = ret; br != NULL; br = regnext(g, br))
++		regoptail(g, br, ender);
++
++	/* Check for proper termination. */
++	if (paren && *g->regparse++ != ')') {
++		FAIL("unmatched ()");
++	} else if (!paren && *g->regparse != '\0') {
++		if (*g->regparse == ')') {
++			FAIL("unmatched ()");
++		} else
++			FAIL("junk on end");	/* "Can't happen". */
++		/* NOTREACHED */
++	}
++
++	return(ret);
++}
++
++/*
++ - regbranch - one alternative of an | operator
++ *
++ * Implements the concatenation operator.
++ */
++static char *
++regbranch(struct match_globals *g, int *flagp)
++{
++	register char *ret;
++	register char *chain;
++	register char *latest;
++	int flags;
++
++	*flagp = WORST;		/* Tentatively. */
++
++	ret = regnode(g, BRANCH);
++	chain = NULL;
++	while (*g->regparse != '\0' && *g->regparse != '|' && *g->regparse != ')') {
++		latest = regpiece(g, &flags);
++		if (latest == NULL)
++			return(NULL);
++		*flagp |= flags&HASWIDTH;
++		if (chain == NULL)	/* First piece. */
++			*flagp |= flags&SPSTART;
++		else
++			regtail(g, chain, latest);
++		chain = latest;
++	}
++	if (chain == NULL)	/* Loop ran zero times. */
++		(void) regnode(g, NOTHING);
++
++	return(ret);
++}
++
++/*
++ - regpiece - something followed by possible [*+?]
++ *
++ * Note that the branching code sequences used for ? and the general cases
++ * of * and + are somewhat optimized:  they use the same NOTHING node as
++ * both the endmarker for their branch list and the body of the last branch.
++ * It might seem that this node could be dispensed with entirely, but the
++ * endmarker role is not redundant.
++ */
++static char *
++regpiece(struct match_globals *g, int *flagp)
++{
++	register char *ret;
++	register char op;
++	register char *next;
++	int flags;
++
++	ret = regatom(g, &flags);
++	if (ret == NULL)
++		return(NULL);
++
++	op = *g->regparse;
++	if (!ISMULT(op)) {
++		*flagp = flags;
++		return(ret);
++	}
++
++	if (!(flags&HASWIDTH) && op != '?')
++		FAIL("*+ operand could be empty");
++	*flagp = (op != '+') ? (WORST|SPSTART) : (WORST|HASWIDTH);
++
++	if (op == '*' && (flags&SIMPLE))
++		reginsert(g, STAR, ret);
++	else if (op == '*') {
++		/* Emit x* as (x&|), where & means "self". */
++		reginsert(g, BRANCH, ret);			/* Either x */
++		regoptail(g, ret, regnode(g, BACK));		/* and loop */
++		regoptail(g, ret, ret);			/* back */
++		regtail(g, ret, regnode(g, BRANCH));		/* or */
++		regtail(g, ret, regnode(g, NOTHING));		/* null. */
++	} else if (op == '+' && (flags&SIMPLE))
++		reginsert(g, PLUS, ret);
++	else if (op == '+') {
++		/* Emit x+ as x(&|), where & means "self". */
++		next = regnode(g, BRANCH);			/* Either */
++		regtail(g, ret, next);
++		regtail(g, regnode(g, BACK), ret);		/* loop back */
++		regtail(g, next, regnode(g, BRANCH));		/* or */
++		regtail(g, ret, regnode(g, NOTHING));		/* null. */
++	} else if (op == '?') {
++		/* Emit x? as (x|) */
++		reginsert(g, BRANCH, ret);			/* Either x */
++		regtail(g, ret, regnode(g, BRANCH));		/* or */
++		next = regnode(g, NOTHING);		/* null. */
++		regtail(g, ret, next);
++		regoptail(g, ret, next);
++	}
++	g->regparse++;
++	if (ISMULT(*g->regparse))
++		FAIL("nested *?+");
++
++	return(ret);
++}
++
++/*
++ - regatom - the lowest level
++ *
++ * Optimization:  gobbles an entire sequence of ordinary characters so that
++ * it can turn them into a single node, which is smaller to store and
++ * faster to run.  Backslashed characters are exceptions, each becoming a
++ * separate node; the code is simpler that way and it's not worth fixing.
++ */
++static char *
++regatom(struct match_globals *g, int *flagp)
++{
++	register char *ret;
++	int flags;
++
++	*flagp = WORST;		/* Tentatively. */
++
++	switch (*g->regparse++) {
++	case '^':
++		ret = regnode(g, BOL);
++		break;
++	case '$':
++		ret = regnode(g, EOL);
++		break;
++	case '.':
++		ret = regnode(g, ANY);
++		*flagp |= HASWIDTH|SIMPLE;
++		break;
++	case '[': {
++			register int class;
++			register int classend;
++
++			if (*g->regparse == '^') {	/* Complement of range. */
++				ret = regnode(g, ANYBUT);
++				g->regparse++;
++			} else
++				ret = regnode(g, ANYOF);
++			if (*g->regparse == ']' || *g->regparse == '-')
++				regc(g, *g->regparse++);
++			while (*g->regparse != '\0' && *g->regparse != ']') {
++				if (*g->regparse == '-') {
++					g->regparse++;
++					if (*g->regparse == ']' || *g->regparse == '\0')
++						regc(g, '-');
++					else {
++						class = UCHARAT(g->regparse-2)+1;
++						classend = UCHARAT(g->regparse);
++						if (class > classend+1)
++							FAIL("invalid [] range");
++						for (; class <= classend; class++)
++							regc(g, class);
++						g->regparse++;
++					}
++				} else
++					regc(g, *g->regparse++);
++			}
++			regc(g, '\0');
++			if (*g->regparse != ']')
++				FAIL("unmatched []");
++			g->regparse++;
++			*flagp |= HASWIDTH|SIMPLE;
++		}
++		break;
++	case '(':
++		ret = reg(g, 1, &flags);
++		if (ret == NULL)
++			return(NULL);
++		*flagp |= flags&(HASWIDTH|SPSTART);
++		break;
++	case '\0':
++	case '|':
++	case ')':
++		FAIL("internal urp");	/* Supposed to be caught earlier. */
++		break;
++	case '?':
++	case '+':
++	case '*':
++		FAIL("?+* follows nothing");
++		break;
++	case '\\':
++		if (*g->regparse == '\0')
++			FAIL("trailing \\");
++		ret = regnode(g, EXACTLY);
++		regc(g, *g->regparse++);
++		regc(g, '\0');
++		*flagp |= HASWIDTH|SIMPLE;
++		break;
++	default: {
++			register int len;
++			register char ender;
++
++			g->regparse--;
++			len = my_strcspn((const char *)g->regparse, (const char *)META);
++			if (len <= 0)
++				FAIL("internal disaster");
++			ender = *(g->regparse+len);
++			if (len > 1 && ISMULT(ender))
++				len--;		/* Back off clear of ?+* operand. */
++			*flagp |= HASWIDTH;
++			if (len == 1)
++				*flagp |= SIMPLE;
++			ret = regnode(g, EXACTLY);
++			while (len > 0) {
++				regc(g, *g->regparse++);
++				len--;
++			}
++			regc(g, '\0');
++		}
++		break;
++	}
++
++	return(ret);
++}
++
++/*
++ - regnode - emit a node
++ */
++static char *			/* Location. */
++regnode(struct match_globals *g, char op)
++{
++	register char *ret;
++	register char *ptr;
++
++	ret = g->regcode;
++	if (ret == &g->regdummy) {
++		g->regsize += 3;
++		return(ret);
++	}
++
++	ptr = ret;
++	*ptr++ = op;
++	*ptr++ = '\0';		/* Null "next" pointer. */
++	*ptr++ = '\0';
++	g->regcode = ptr;
++
++	return(ret);
++}
++
++/*
++ - regc - emit (if appropriate) a byte of code
++ */
++static void
++regc(struct match_globals *g, char b)
++{
++	if (g->regcode != &g->regdummy)
++		*g->regcode++ = b;
++	else
++		g->regsize++;
++}
++
++/*
++ - reginsert - insert an operator in front of already-emitted operand
++ *
++ * Means relocating the operand.
++ */
++static void
++reginsert(struct match_globals *g, char op, char* opnd)
++{
++	register char *src;
++	register char *dst;
++	register char *place;
++
++	if (g->regcode == &g->regdummy) {
++		g->regsize += 3;
++		return;
++	}
++
++	src = g->regcode;
++	g->regcode += 3;
++	dst = g->regcode;
++	while (src > opnd)
++		*--dst = *--src;
++
++	place = opnd;		/* Op node, where operand used to be. */
++	*place++ = op;
++	*place++ = '\0';
++	*place++ = '\0';
++}
++
++/*
++ - regtail - set the next-pointer at the end of a node chain
++ */
++static void
++regtail(struct match_globals *g, char *p, char *val)
++{
++	register char *scan;
++	register char *temp;
++	register int offset;
++
++	if (p == &g->regdummy)
++		return;
++
++	/* Find last node. */
++	scan = p;
++	for (;;) {
++		temp = regnext(g, scan);
++		if (temp == NULL)
++			break;
++		scan = temp;
++	}
++
++	if (OP(scan) == BACK)
++		offset = scan - val;
++	else
++		offset = val - scan;
++	*(scan+1) = (offset>>8)&0377;
++	*(scan+2) = offset&0377;
++}
++
++/*
++ - regoptail - regtail on operand of first argument; nop if operandless
++ */
++static void
++regoptail(struct match_globals *g, char *p, char *val)
++{
++	/* "Operandless" and "op != BRANCH" are synonymous in practice. */
++	if (p == NULL || p == &g->regdummy || OP(p) != BRANCH)
++		return;
++	regtail(g, OPERAND(p), val);
++}
++
++/*
++ * regexec and friends
++ */
++
++
++/*
++ * Forwards.
++ */
++STATIC int regtry(struct match_globals *g, regexp *prog, char *string);
++STATIC int regmatch(struct match_globals *g, char *prog);
++STATIC int regrepeat(struct match_globals *g, char *p);
++
++#ifdef DEBUG
++int regnarrate = 0;
++void regdump();
++STATIC char *regprop(char *op);
++#endif
++
++/*
++ - regexec - match a regexp against a string
++ */
++int
++regexec(regexp *prog, char *string)
++{
++	register char *s;
++	struct match_globals g;
++
++	/* Be paranoid... */
++	if (prog == NULL || string == NULL) {
++		printk("<3>Regexp: NULL parameter\n");
++		return(0);
++	}
++
++	/* Check validity of program. */
++	if (UCHARAT(prog->program) != MAGIC) {
++		printk("<3>Regexp: corrupted program\n");
++		return(0);
++	}
++
++	/* If there is a "must appear" string, look for it. */
++	if (prog->regmust != NULL) {
++		s = string;
++		while ((s = strchr(s, prog->regmust[0])) != NULL) {
++			if (strncmp(s, prog->regmust, prog->regmlen) == 0)
++				break;	/* Found it. */
++			s++;
++		}
++		if (s == NULL)	/* Not present. */
++			return(0);
++	}
++
++	/* Mark beginning of line for ^ . */
++	g.regbol = string;
++
++	/* Simplest case:  anchored match need be tried only once. */
++	if (prog->reganch)
++		return(regtry(&g, prog, string));
++
++	/* Messy cases:  unanchored match. */
++	s = string;
++	if (prog->regstart != '\0')
++		/* We know what char it must start with. */
++		while ((s = strchr(s, prog->regstart)) != NULL) {
++			if (regtry(&g, prog, s))
++				return(1);
++			s++;
++		}
++	else
++		/* We don't -- general case. */
++		do {
++			if (regtry(&g, prog, s))
++				return(1);
++		} while (*s++ != '\0');
++
++	/* Failure. */
++	return(0);
++}
++
++/*
++ - regtry - try match at specific point
++ */
++static int			/* 0 failure, 1 success */
++regtry(struct match_globals *g, regexp *prog, char *string)
++{
++	register int i;
++	register char **sp;
++	register char **ep;
++
++	g->reginput = string;
++	g->regstartp = prog->startp;
++	g->regendp = prog->endp;
++
++	sp = prog->startp;
++	ep = prog->endp;
++	for (i = NSUBEXP; i > 0; i--) {
++		*sp++ = NULL;
++		*ep++ = NULL;
++	}
++	if (regmatch(g, prog->program + 1)) {
++		prog->startp[0] = string;
++		prog->endp[0] = g->reginput;
++		return(1);
++	} else
++		return(0);
++}
++
++/*
++ - regmatch - main matching routine
++ *
++ * Conceptually the strategy is simple:  check to see whether the current
++ * node matches, call self recursively to see whether the rest matches,
++ * and then act accordingly.  In practice we make some effort to avoid
++ * recursion, in particular by going through "ordinary" nodes (that don't
++ * need to know whether the rest of the match failed) by a loop instead of
++ * by recursion.
++ */
++static int			/* 0 failure, 1 success */
++regmatch(struct match_globals *g, char *prog)
++{
++	register char *scan = prog; /* Current node. */
++	char *next;		    /* Next node. */
++
++#ifdef DEBUG
++	if (scan != NULL && regnarrate)
++		fprintf(stderr, "%s(\n", regprop(scan));
++#endif
++	while (scan != NULL) {
++#ifdef DEBUG
++		if (regnarrate)
++			fprintf(stderr, "%s...\n", regprop(scan));
++#endif
++		next = regnext(g, scan);
++
++		switch (OP(scan)) {
++		case BOL:
++			if (g->reginput != g->regbol)
++				return(0);
++			break;
++		case EOL:
++			if (*g->reginput != '\0')
++				return(0);
++			break;
++		case ANY:
++			if (*g->reginput == '\0')
++				return(0);
++			g->reginput++;
++			break;
++		case EXACTLY: {
++				register int len;
++				register char *opnd;
++
++				opnd = OPERAND(scan);
++				/* Inline the first character, for speed. */
++				if (*opnd != *g->reginput)
++					return(0);
++				len = strlen(opnd);
++				if (len > 1 && strncmp(opnd, g->reginput, len) != 0)
++					return(0);
++				g->reginput += len;
++			}
++			break;
++		case ANYOF:
++			if (*g->reginput == '\0' || strchr(OPERAND(scan), *g->reginput) == NULL)
++				return(0);
++			g->reginput++;
++			break;
++		case ANYBUT:
++			if (*g->reginput == '\0' || strchr(OPERAND(scan), *g->reginput) != NULL)
++				return(0);
++			g->reginput++;
++			break;
++		case NOTHING:
++		case BACK:
++			break;
++		case OPEN+1:
++		case OPEN+2:
++		case OPEN+3:
++		case OPEN+4:
++		case OPEN+5:
++		case OPEN+6:
++		case OPEN+7:
++		case OPEN+8:
++		case OPEN+9: {
++				register int no;
++				register char *save;
++
++				no = OP(scan) - OPEN;
++				save = g->reginput;
++
++				if (regmatch(g, next)) {
++					/*
++					 * Don't set startp if some later
++					 * invocation of the same parentheses
++					 * already has.
++					 */
++					if (g->regstartp[no] == NULL)
++						g->regstartp[no] = save;
++					return(1);
++				} else
++					return(0);
++			}
++			break;
++		case CLOSE+1:
++		case CLOSE+2:
++		case CLOSE+3:
++		case CLOSE+4:
++		case CLOSE+5:
++		case CLOSE+6:
++		case CLOSE+7:
++		case CLOSE+8:
++		case CLOSE+9:
++			{
++				register int no;
++				register char *save;
++
++				no = OP(scan) - CLOSE;
++				save = g->reginput;
++
++				if (regmatch(g, next)) {
++					/*
++					 * Don't set endp if some later
++					 * invocation of the same parentheses
++					 * already has.
++					 */
++					if (g->regendp[no] == NULL)
++						g->regendp[no] = save;
++					return(1);
++				} else
++					return(0);
++			}
++			break;
++		case BRANCH: {
++				register char *save;
++
++				if (OP(next) != BRANCH)		/* No choice. */
++					next = OPERAND(scan);	/* Avoid recursion. */
++				else {
++					do {
++						save = g->reginput;
++						if (regmatch(g, OPERAND(scan)))
++							return(1);
++						g->reginput = save;
++						scan = regnext(g, scan);
++					} while (scan != NULL && OP(scan) == BRANCH);
++					return(0);
++					/* NOTREACHED */
++				}
++			}
++			break;
++		case STAR:
++		case PLUS: {
++				register char nextch;
++				register int no;
++				register char *save;
++				register int min;
++
++				/*
++				 * Lookahead to avoid useless match attempts
++				 * when we know what character comes next.
++				 */
++				nextch = '\0';
++				if (OP(next) == EXACTLY)
++					nextch = *OPERAND(next);
++				min = (OP(scan) == STAR) ? 0 : 1;
++				save = g->reginput;
++				no = regrepeat(g, OPERAND(scan));
++				while (no >= min) {
++					/* If it could work, try it. */
++					if (nextch == '\0' || *g->reginput == nextch)
++						if (regmatch(g, next))
++							return(1);
++					/* Couldn't or didn't -- back up. */
++					no--;
++					g->reginput = save + no;
++				}
++				return(0);
++			}
++			break;
++		case END:
++			return(1);	/* Success! */
++			break;
++		default:
++			printk("<3>Regexp: memory corruption\n");
++			return(0);
++			break;
++		}
++
++		scan = next;
++	}
++
++	/*
++	 * We get here only if there's trouble -- normally "case END" is
++	 * the terminating point.
++	 */
++	printk("<3>Regexp: corrupted pointers\n");
++	return(0);
++}
++
++/*
++ - regrepeat - repeatedly match something simple, report how many
++ */
++static int
++regrepeat(struct match_globals *g, char *p)
++{
++	register int count = 0;
++	register char *scan;
++	register char *opnd;
++
++	scan = g->reginput;
++	opnd = OPERAND(p);
++	switch (OP(p)) {
++	case ANY:
++		count = strlen(scan);
++		scan += count;
++		break;
++	case EXACTLY:
++		while (*opnd == *scan) {
++			count++;
++			scan++;
++		}
++		break;
++	case ANYOF:
++		while (*scan != '\0' && strchr(opnd, *scan) != NULL) {
++			count++;
++			scan++;
++		}
++		break;
++	case ANYBUT:
++		while (*scan != '\0' && strchr(opnd, *scan) == NULL) {
++			count++;
++			scan++;
++		}
++		break;
++	default:		/* Oh dear.  Called inappropriately. */
++		printk("<3>Regexp: internal foulup\n");
++		count = 0;	/* Best compromise. */
++		break;
++	}
++	g->reginput = scan;
++
++	return(count);
++}
++
++/*
++ - regnext - dig the "next" pointer out of a node
++ */
++static char*
++regnext(struct match_globals *g, char *p)
++{
++	register int offset;
++
++	if (p == &g->regdummy)
++		return(NULL);
++
++	offset = NEXT(p);
++	if (offset == 0)
++		return(NULL);
++
++	if (OP(p) == BACK)
++		return(p-offset);
++	else
++		return(p+offset);
++}
++
++#ifdef DEBUG
++
++STATIC char *regprop();
++
++/*
++ - regdump - dump a regexp onto stdout in vaguely comprehensible form
++ */
++void
++regdump(regexp *r)
++{
++	register char *s;
++	register char op = EXACTLY;	/* Arbitrary non-END op. */
++	register char *next;
++	/* extern char *strchr(); */
++
++
++	s = r->program + 1;
++	while (op != END) {	/* While that wasn't END last time... */
++		op = OP(s);
++		printf("%2d%s", s-r->program, regprop(s));	/* Where, what. */
++		next = regnext(s);
++		if (next == NULL)		/* Next ptr. */
++			printf("(0)");
++		else
++			printf("(%d)", (s-r->program)+(next-s));
++		s += 3;
++		if (op == ANYOF || op == ANYBUT || op == EXACTLY) {
++			/* Literal string, where present. */
++			while (*s != '\0') {
++				putchar(*s);
++				s++;
++			}
++			s++;
++		}
++		putchar('\n');
++	}
++
++	/* Header fields of interest. */
++	if (r->regstart != '\0')
++		printf("start `%c' ", r->regstart);
++	if (r->reganch)
++		printf("anchored ");
++	if (r->regmust != NULL)
++		printf("must have \"%s\"", r->regmust);
++	printf("\n");
++}
++
++/*
++ - regprop - printable representation of opcode
++ */
++static char *
++regprop(char *op)
++{
++#define BUFLEN 50
++	register char *p;
++	static char buf[BUFLEN];
++
++	strcpy(buf, ":");
++
++	switch (OP(op)) {
++	case BOL:
++		p = "BOL";
++		break;
++	case EOL:
++		p = "EOL";
++		break;
++	case ANY:
++		p = "ANY";
++		break;
++	case ANYOF:
++		p = "ANYOF";
++		break;
++	case ANYBUT:
++		p = "ANYBUT";
++		break;
++	case BRANCH:
++		p = "BRANCH";
++		break;
++	case EXACTLY:
++		p = "EXACTLY";
++		break;
++	case NOTHING:
++		p = "NOTHING";
++		break;
++	case BACK:
++		p = "BACK";
++		break;
++	case END:
++		p = "END";
++		break;
++	case OPEN+1:
++	case OPEN+2:
++	case OPEN+3:
++	case OPEN+4:
++	case OPEN+5:
++	case OPEN+6:
++	case OPEN+7:
++	case OPEN+8:
++	case OPEN+9:
++		snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "OPEN%d", OP(op)-OPEN);
++		p = NULL;
++		break;
++	case CLOSE+1:
++	case CLOSE+2:
++	case CLOSE+3:
++	case CLOSE+4:
++	case CLOSE+5:
++	case CLOSE+6:
++	case CLOSE+7:
++	case CLOSE+8:
++	case CLOSE+9:
++		snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "CLOSE%d", OP(op)-CLOSE);
++		p = NULL;
++		break;
++	case STAR:
++		p = "STAR";
++		break;
++	case PLUS:
++		p = "PLUS";
++		break;
++	default:
++		printk("<3>Regexp: corrupted opcode\n");
++		break;
++	}
++	if (p != NULL)
++		strncat(buf, p, BUFLEN-strlen(buf));
++	return(buf);
++}
++#endif
++
++
+--- /dev/null
++++ b/net/netfilter/regexp/regexp.h
+@@ -0,0 +1,41 @@
++/*
++ * Definitions etc. for regexp(3) routines.
++ *
++ * Caveat:  this is V8 regexp(3) [actually, a reimplementation thereof],
++ * not the System V one.
++ */
++
++#ifndef REGEXP_H
++#define REGEXP_H
++
++
++/*
++http://www.opensource.apple.com/darwinsource/10.3/expect-1/expect/expect.h ,
++which contains a version of this library, says:
++
++ *
++ * NSUBEXP must be at least 10, and no greater than 117 or the parser
++ * will not work properly.
++ *
++
++However, it looks rather like this library is limited to 10.  If you think
++otherwise, let us know.
++*/
++
++#define NSUBEXP  10
++typedef struct regexp {
++	char *startp[NSUBEXP];
++	char *endp[NSUBEXP];
++	char regstart;		/* Internal use only. */
++	char reganch;		/* Internal use only. */
++	char *regmust;		/* Internal use only. */
++	int regmlen;		/* Internal use only. */
++	char program[1];	/* Unwarranted chumminess with compiler. */
++} regexp;
++
++regexp * regcomp(char *exp, int *patternsize);
++int regexec(regexp *prog, char *string);
++void regsub(regexp *prog, char *source, char *dest);
++void regerror(char *s);
++
++#endif
+--- /dev/null
++++ b/net/netfilter/regexp/regmagic.h
+@@ -0,0 +1,5 @@
++/*
++ * The first byte of the regexp internal "program" is actually this magic
++ * number; the start node begins in the second byte.
++ */
++#define	MAGIC	0234
+--- /dev/null
++++ b/net/netfilter/regexp/regsub.c
+@@ -0,0 +1,95 @@
++/*
++ * regsub
++ * @(#)regsub.c	1.3 of 2 April 86
++ *
++ *	Copyright (c) 1986 by University of Toronto.
++ *	Written by Henry Spencer.  Not derived from licensed software.
++ *
++ *	Permission is granted to anyone to use this software for any
++ *	purpose on any computer system, and to redistribute it freely,
++ *	subject to the following restrictions:
++ *
++ *	1. The author is not responsible for the consequences of use of
++ *		this software, no matter how awful, even if they arise
++ *		from defects in it.
++ *
++ *	2. The origin of this software must not be misrepresented, either
++ *		by explicit claim or by omission.
++ *
++ *	3. Altered versions must be plainly marked as such, and must not
++ *		be misrepresented as being the original software.
++ *
++ *
++ * This code was modified by Ethan Sommer to work within the kernel
++ * (it now uses kmalloc etc..)
++ *
++ */
++#include "regexp.h"
++#include "regmagic.h"
++#include <linux/string.h>
++
++
++#ifndef CHARBITS
++#define	UCHARAT(p)	((int)*(unsigned char *)(p))
++#else
++#define	UCHARAT(p)	((int)*(p)&CHARBITS)
++#endif
++
++#if 0
++//void regerror(char * s)
++//{
++//        printk("regexp(3): %s", s);
++//        /* NOTREACHED */
++//}
++#endif
++
++/*
++ - regsub - perform substitutions after a regexp match
++ */
++void
++regsub(regexp * prog, char * source, char * dest)
++{
++	register char *src;
++	register char *dst;
++	register char c;
++	register int no;
++	register int len;
++	
++	/* Not necessary and gcc doesn't like it -MLS */
++	/*extern char *strncpy();*/
++
++	if (prog == NULL || source == NULL || dest == NULL) {
++		regerror("NULL parm to regsub");
++		return;
++	}
++	if (UCHARAT(prog->program) != MAGIC) {
++		regerror("damaged regexp fed to regsub");
++		return;
++	}
++
++	src = source;
++	dst = dest;
++	while ((c = *src++) != '\0') {
++		if (c == '&')
++			no = 0;
++		else if (c == '\\' && '0' <= *src && *src <= '9')
++			no = *src++ - '0';
++		else
++			no = -1;
++
++		if (no < 0) {	/* Ordinary character. */
++			if (c == '\\' && (*src == '\\' || *src == '&'))
++				c = *src++;
++			*dst++ = c;
++		} else if (prog->startp[no] != NULL && prog->endp[no] != NULL) {
++			len = prog->endp[no] - prog->startp[no];
++			(void) strncpy(dst, prog->startp[no], len);
++			dst += len;
++			if (len != 0 && *(dst-1) == '\0') {	/* strncpy hit NUL. */
++				regerror("damaged match string");
++				return;
++			}
++		}
++	}
++	*dst++ = '\0';
++}
+--- /dev/null
++++ b/net/netfilter/xt_layer7.c
+@@ -0,0 +1,666 @@
++/*
++  Kernel module to match application layer (OSI layer 7) data in connections.
++
++  http://l7-filter.sf.net
++
++  (C) 2003-2009 Matthew Strait and Ethan Sommer.
++
++  This program is free software; you can redistribute it and/or
++  modify it under the terms of the GNU General Public License
++  as published by the Free Software Foundation; either version
++  2 of the License, or (at your option) any later version.
++  http://www.gnu.org/licenses/gpl.txt
++
++  Based on ipt_string.c (C) 2000 Emmanuel Roger <winfield@freegates.be>,
++  xt_helper.c (C) 2002 Harald Welte and cls_layer7.c (C) 2003 Matthew Strait,
++  Ethan Sommer, Justin Levandoski.
++*/
++
++#include <linux/spinlock.h>
++#include <linux/version.h>
++#include <net/ip.h>
++#include <net/tcp.h>
++#include <linux/module.h>
++#include <linux/skbuff.h>
++#include <linux/netfilter.h>
++#include <net/netfilter/nf_conntrack.h>
++#include <net/netfilter/nf_conntrack_core.h>
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)
++#include <net/netfilter/nf_conntrack_extend.h>
++#include <net/netfilter/nf_conntrack_acct.h>
++#endif
++#include <linux/netfilter/x_tables.h>
++#include <linux/netfilter/xt_layer7.h>
++#include <linux/ctype.h>
++#include <linux/proc_fs.h>
++
++#include "regexp/regexp.c"
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Matthew Strait <quadong@users.sf.net>, Ethan Sommer <sommere@users.sf.net>");
++MODULE_DESCRIPTION("iptables application layer match module");
++MODULE_ALIAS("ipt_layer7");
++MODULE_VERSION("2.21");
++
++static int maxdatalen = 2048; // this is the default
++module_param(maxdatalen, int, 0444);
++MODULE_PARM_DESC(maxdatalen, "maximum bytes of data looked at by l7-filter");
++#ifdef CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG
++	#define DPRINTK(format,args...) printk(format,##args)
++#else
++	#define DPRINTK(format,args...)
++#endif
++
++/* Number of packets whose data we look at.
++This can be modified through /proc/net/layer7_numpackets */
++static int num_packets = 10;
++
++static struct pattern_cache {
++	char * regex_string;
++	regexp * pattern;
++	struct pattern_cache * next;
++} * first_pattern_cache = NULL;
++
++DEFINE_SPINLOCK(l7_lock);
++
++static int total_acct_packets(struct nf_conn *ct)
++{
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 26)
++	BUG_ON(ct == NULL);
++	return (ct->counters[IP_CT_DIR_ORIGINAL].packets + ct->counters[IP_CT_DIR_REPLY].packets);
++#else
++	struct nf_conn_counter *acct;
++
++	BUG_ON(ct == NULL);
++	acct = nf_conn_acct_find(ct);
++	if (!acct)
++		return 0;
++	return (acct[IP_CT_DIR_ORIGINAL].packets + acct[IP_CT_DIR_REPLY].packets);
++#endif
++}
++
++#ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG
++/* Converts an unfriendly string into a friendly one by
++replacing unprintables with periods and all whitespace with " ". */
++static char * friendly_print(unsigned char * s)
++{
++	char * f = kmalloc(strlen(s) + 1, GFP_ATOMIC);
++	int i;
++
++	if(!f) {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory in "
++					"friendly_print, bailing.\n");
++		return NULL;
++	}
++
++	for(i = 0; i < strlen(s); i++){
++		if(isprint(s[i]) && s[i] < 128)	f[i] = s[i];
++		else if(isspace(s[i]))		f[i] = ' ';
++		else 				f[i] = '.';
++	}
++	f[i] = '\0';
++	return f;
++}
++
++static char dec2hex(int i)
++{
++	switch (i) {
++		case 0 ... 9:
++			return (i + '0');
++			break;
++		case 10 ... 15:
++			return (i - 10 + 'a');
++			break;
++		default:
++			if (net_ratelimit())
++				printk("layer7: Problem in dec2hex\n");
++			return '\0';
++	}
++}
++
++static char * hex_print(unsigned char * s)
++{
++	char * g = kmalloc(strlen(s)*3 + 1, GFP_ATOMIC);
++	int i;
++
++	if(!g) {
++	       if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory in hex_print, "
++					"bailing.\n");
++	       return NULL;
++	}
++
++	for(i = 0; i < strlen(s); i++) {
++		g[i*3    ] = dec2hex(s[i]/16);
++		g[i*3 + 1] = dec2hex(s[i]%16);
++		g[i*3 + 2] = ' ';
++	}
++	g[i*3] = '\0';
++
++	return g;
++}
++#endif // DEBUG
++
++/* Use instead of regcomp.  As we expect to be seeing the same regexps over and
++over again, it make sense to cache the results. */
++static regexp * compile_and_cache(const char * regex_string, 
++                                  const char * protocol)
++{
++	struct pattern_cache * node               = first_pattern_cache;
++	struct pattern_cache * last_pattern_cache = first_pattern_cache;
++	struct pattern_cache * tmp;
++	unsigned int len;
++
++	while (node != NULL) {
++		if (!strcmp(node->regex_string, regex_string))
++		return node->pattern;
++
++		last_pattern_cache = node;/* points at the last non-NULL node */
++		node = node->next;
++	}
++
++	/* If we reach the end of the list, then we have not yet cached
++	   the pattern for this regex. Let's do that now.
++	   Be paranoid about running out of memory to avoid list corruption. */
++	tmp = kmalloc(sizeof(struct pattern_cache), GFP_ATOMIC);
++
++	if(!tmp) {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory in "
++					"compile_and_cache, bailing.\n");
++		return NULL;
++	}
++
++	tmp->regex_string  = kmalloc(strlen(regex_string) + 1, GFP_ATOMIC);
++	tmp->pattern       = kmalloc(sizeof(struct regexp),    GFP_ATOMIC);
++	tmp->next = NULL;
++
++	if(!tmp->regex_string || !tmp->pattern) {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory in "
++					"compile_and_cache, bailing.\n");
++		kfree(tmp->regex_string);
++		kfree(tmp->pattern);
++		kfree(tmp);
++		return NULL;
++	}
++
++	/* Ok.  The new node is all ready now. */
++	node = tmp;
++
++	if(first_pattern_cache == NULL) /* list is empty */
++		first_pattern_cache = node; /* make node the beginning */
++	else
++		last_pattern_cache->next = node; /* attach node to the end */
++
++	/* copy the string and compile the regex */
++	len = strlen(regex_string);
++	DPRINTK("About to compile this: \"%s\"\n", regex_string);
++	node->pattern = regcomp((char *)regex_string, &len);
++	if ( !node->pattern ) {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: Error compiling regexp "
++					"\"%s\" (%s)\n", 
++					regex_string, protocol);
++		/* pattern is now cached as NULL, so we won't try again. */
++	}
++
++	strcpy(node->regex_string, regex_string);
++	return node->pattern;
++}
++
++static int can_handle(const struct sk_buff *skb)
++{
++	if(!ip_hdr(skb)) /* not IP */
++		return 0;
++	if(ip_hdr(skb)->protocol != IPPROTO_TCP &&
++	   ip_hdr(skb)->protocol != IPPROTO_UDP &&
++	   ip_hdr(skb)->protocol != IPPROTO_ICMP)
++		return 0;
++	return 1;
++}
++
++/* Returns offset the into the skb->data that the application data starts */
++static int app_data_offset(const struct sk_buff *skb)
++{
++	/* In case we are ported somewhere (ebtables?) where ip_hdr(skb)
++	isn't set, this can be gotten from 4*(skb->data[0] & 0x0f) as well. */
++	int ip_hl = 4*ip_hdr(skb)->ihl;
++
++	if( ip_hdr(skb)->protocol == IPPROTO_TCP ) {
++		/* 12 == offset into TCP header for the header length field.
++		Can't get this with skb->h.th->doff because the tcphdr
++		struct doesn't get set when routing (this is confirmed to be
++		true in Netfilter as well as QoS.) */
++		int tcp_hl = 4*(skb->data[ip_hl + 12] >> 4);
++
++		return ip_hl + tcp_hl;
++	} else if( ip_hdr(skb)->protocol == IPPROTO_UDP  ) {
++		return ip_hl + 8; /* UDP header is always 8 bytes */
++	} else if( ip_hdr(skb)->protocol == IPPROTO_ICMP ) {
++		return ip_hl + 8; /* ICMP header is 8 bytes */
++	} else {
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: tried to handle unknown "
++					"protocol!\n");
++		return ip_hl + 8; /* something reasonable */
++	}
++}
++
++/* handles whether there's a match when we aren't appending data anymore */
++static int match_no_append(struct nf_conn * conntrack, 
++                           struct nf_conn * master_conntrack, 
++                           enum ip_conntrack_info ctinfo,
++                           enum ip_conntrack_info master_ctinfo,
++                           const struct xt_layer7_info * info)
++{
++	/* If we're in here, throw the app data away */
++	if(master_conntrack->layer7.app_data != NULL) {
++
++	#ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG
++		if(!master_conntrack->layer7.app_proto) {
++			char * f = 
++			  friendly_print(master_conntrack->layer7.app_data);
++			char * g = 
++			  hex_print(master_conntrack->layer7.app_data);
++			DPRINTK("\nl7-filter gave up after %d bytes "
++				"(%d packets):\n%s\n",
++				strlen(f), total_acct_packets(master_conntrack), f);
++			kfree(f);
++			DPRINTK("In hex: %s\n", g);
++			kfree(g);
++		}
++	#endif
++
++		kfree(master_conntrack->layer7.app_data);
++		master_conntrack->layer7.app_data = NULL; /* don't free again */
++	}
++
++	if(master_conntrack->layer7.app_proto){
++		/* Here child connections set their .app_proto (for /proc) */
++		if(!conntrack->layer7.app_proto) {
++			conntrack->layer7.app_proto = 
++			  kmalloc(strlen(master_conntrack->layer7.app_proto)+1, 
++			    GFP_ATOMIC);
++			if(!conntrack->layer7.app_proto){
++				if (net_ratelimit())
++					printk(KERN_ERR "layer7: out of memory "
++							"in match_no_append, "
++							"bailing.\n");
++				return 1;
++			}
++			strcpy(conntrack->layer7.app_proto, 
++				master_conntrack->layer7.app_proto);
++		}
++
++		return (!strcmp(master_conntrack->layer7.app_proto, 
++				info->protocol));
++	}
++	else {
++		/* If not classified, set to "unknown" to distinguish from
++		connections that are still being tested. */
++		master_conntrack->layer7.app_proto = 
++			kmalloc(strlen("unknown")+1, GFP_ATOMIC);
++		if(!master_conntrack->layer7.app_proto){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: out of memory in "
++						"match_no_append, bailing.\n");
++			return 1;
++		}
++		strcpy(master_conntrack->layer7.app_proto, "unknown");
++		return 0;
++	}
++}
++
++/* add the new app data to the conntrack.  Return number of bytes added. */
++static int add_data(struct nf_conn * master_conntrack,
++                    char * app_data, int appdatalen)
++{
++	int length = 0, i;
++	int oldlength = master_conntrack->layer7.app_data_len;
++
++	/* This is a fix for a race condition by Deti Fliegl. However, I'm not 
++	   clear on whether the race condition exists or whether this really 
++	   fixes it.  I might just be being dense... Anyway, if it's not really 
++	   a fix, all it does is waste a very small amount of time. */
++	if(!master_conntrack->layer7.app_data) return 0;
++
++	/* Strip nulls. Make everything lower case (our regex lib doesn't
++	do case insensitivity).  Add it to the end of the current data. */
++	for(i = 0; i < maxdatalen-oldlength-1 &&
++		   i < appdatalen; i++) {
++		if(app_data[i] != '\0') {
++			/* the kernel version of tolower mungs 'upper ascii' */
++			master_conntrack->layer7.app_data[length+oldlength] =
++				isascii(app_data[i])? 
++					tolower(app_data[i]) : app_data[i];
++			length++;
++		}
++	}
++
++	master_conntrack->layer7.app_data[length+oldlength] = '\0';
++	master_conntrack->layer7.app_data_len = length + oldlength;
++
++	return length;
++}
++
++/* taken from drivers/video/modedb.c */
++static int my_atoi(const char *s)
++{
++	int val = 0;
++
++	for (;; s++) {
++		switch (*s) {
++			case '0'...'9':
++			val = 10*val+(*s-'0');
++			break;
++		default:
++			return val;
++		}
++	}
++}
++
++/* write out num_packets to userland. */
++static int layer7_read_proc(char* page, char ** start, off_t off, int count,
++                            int* eof, void * data)
++{
++	if(num_packets > 99 && net_ratelimit())
++		printk(KERN_ERR "layer7: NOT REACHED. num_packets too big\n");
++
++	page[0] = num_packets/10 + '0';
++	page[1] = num_packets%10 + '0';
++	page[2] = '\n';
++	page[3] = '\0';
++
++	*eof=1;
++
++	return 3;
++}
++
++/* Read in num_packets from userland */
++static int layer7_write_proc(struct file* file, const char* buffer,
++                             unsigned long count, void *data)
++{
++	char * foo = kmalloc(count, GFP_ATOMIC);
++
++	if(!foo){
++		if (net_ratelimit())
++			printk(KERN_ERR "layer7: out of memory, bailing. "
++					"num_packets unchanged.\n");
++		return count;
++	}
++
++	if(copy_from_user(foo, buffer, count)) {
++		return -EFAULT;
++	}
++
++
++	num_packets = my_atoi(foo);
++	kfree (foo);
++
++	/* This has an arbitrary limit to make the math easier. I'm lazy.
++	But anyway, 99 is a LOT! If you want more, you're doing it wrong! */
++	if(num_packets > 99) {
++		printk(KERN_WARNING "layer7: num_packets can't be > 99.\n");
++		num_packets = 99;
++	} else if(num_packets < 1) {
++		printk(KERN_WARNING "layer7: num_packets can't be < 1.\n");
++		num_packets = 1;
++	}
++
++	return count;
++}
++
++static bool
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++match(const struct sk_buff *skbin, const struct xt_match_param *par)
++#else
++match(const struct sk_buff *skbin,
++      const struct net_device *in,
++      const struct net_device *out,
++      const struct xt_match *match,
++      const void *matchinfo,
++      int offset,
++      unsigned int protoff,
++      bool *hotdrop)
++#endif
++{
++	/* sidestep const without getting a compiler warning... */
++	struct sk_buff * skb = (struct sk_buff *)skbin; 
++
++	const struct xt_layer7_info * info = 
++	#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++		par->matchinfo;
++	#else
++		matchinfo;
++	#endif
++
++	enum ip_conntrack_info master_ctinfo, ctinfo;
++	struct nf_conn *master_conntrack, *conntrack;
++	unsigned char * app_data;
++	unsigned int pattern_result, appdatalen;
++	regexp * comppattern;
++
++	/* Be paranoid/incompetent - lock the entire match function. */
++	spin_lock_bh(&l7_lock);
++
++	if(!can_handle(skb)){
++		DPRINTK("layer7: This is some protocol I can't handle.\n");
++		spin_unlock_bh(&l7_lock);
++		return info->invert;
++	}
++
++	/* Treat parent & all its children together as one connection, except
++	for the purpose of setting conntrack->layer7.app_proto in the actual
++	connection. This makes /proc/net/ip_conntrack more satisfying. */
++	if(!(conntrack = nf_ct_get(skb, &ctinfo)) ||
++	   !(master_conntrack=nf_ct_get(skb,&master_ctinfo))){
++		DPRINTK("layer7: couldn't get conntrack.\n");
++		spin_unlock_bh(&l7_lock);
++		return info->invert;
++	}
++
++	/* Try to get a master conntrack (and its master etc) for FTP, etc. */
++	while (master_ct(master_conntrack) != NULL)
++		master_conntrack = master_ct(master_conntrack);
++
++	/* if we've classified it or seen too many packets */
++	if(total_acct_packets(master_conntrack) > num_packets ||
++	   master_conntrack->layer7.app_proto) {
++
++		pattern_result = match_no_append(conntrack, master_conntrack, 
++						 ctinfo, master_ctinfo, info);
++
++		/* skb->cb[0] == seen. Don't do things twice if there are 
++		multiple l7 rules. I'm not sure that using cb for this purpose 
++		is correct, even though it says "put your private variables 
++		there". But it doesn't look like it is being used for anything
++		else in the skbs that make it here. */
++		skb->cb[0] = 1; /* marking it seen here's probably irrelevant */
++
++		spin_unlock_bh(&l7_lock);
++		return (pattern_result ^ info->invert);
++	}
++
++	if(skb_is_nonlinear(skb)){
++		if(skb_linearize(skb) != 0){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: failed to linearize "
++						"packet, bailing.\n");
++			spin_unlock_bh(&l7_lock);
++			return info->invert;
++		}
++	}
++
++	/* now that the skb is linearized, it's safe to set these. */
++	app_data = skb->data + app_data_offset(skb);
++	appdatalen = skb_tail_pointer(skb) - app_data;
++
++	/* the return value gets checked later, when we're ready to use it */
++	comppattern = compile_and_cache(info->pattern, info->protocol);
++
++	/* On the first packet of a connection, allocate space for app data */
++	if(total_acct_packets(master_conntrack) == 1 && !skb->cb[0] && 
++	   !master_conntrack->layer7.app_data){
++		master_conntrack->layer7.app_data = 
++			kmalloc(maxdatalen, GFP_ATOMIC);
++		if(!master_conntrack->layer7.app_data){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: out of memory in "
++						"match, bailing.\n");
++			spin_unlock_bh(&l7_lock);
++			return info->invert;
++		}
++
++		master_conntrack->layer7.app_data[0] = '\0';
++	}
++
++	/* Can be here, but unallocated, if numpackets is increased near
++	the beginning of a connection */
++	if(master_conntrack->layer7.app_data == NULL){
++		spin_unlock_bh(&l7_lock);
++		return info->invert; /* unmatched */
++	}
++
++	if(!skb->cb[0]){
++		int newbytes;
++		newbytes = add_data(master_conntrack, app_data, appdatalen);
++
++		if(newbytes == 0) { /* didn't add any data */
++			skb->cb[0] = 1;
++			/* Didn't match before, not going to match now */
++			spin_unlock_bh(&l7_lock);
++			return info->invert;
++		}
++	}
++
++	/* If looking for "unknown", then never match.  "Unknown" means that
++	we've given up; we're still trying with these packets. */
++	if(!strcmp(info->protocol, "unknown")) {
++		pattern_result = 0;
++	/* If looking for "unset", then always match. "Unset" means that we
++	haven't yet classified the connection. */
++	} else if(!strcmp(info->protocol, "unset")) {
++		pattern_result = 2;
++		DPRINTK("layer7: matched unset: not yet classified "
++			"(%d/%d packets)\n",
++                        total_acct_packets(master_conntrack), num_packets);
++	/* If the regexp failed to compile, don't bother running it */
++	} else if(comppattern && 
++		  regexec(comppattern, master_conntrack->layer7.app_data)){
++		DPRINTK("layer7: matched %s\n", info->protocol);
++		pattern_result = 1;
++	} else pattern_result = 0;
++
++	if(pattern_result == 1) {
++		master_conntrack->layer7.app_proto = 
++			kmalloc(strlen(info->protocol)+1, GFP_ATOMIC);
++		if(!master_conntrack->layer7.app_proto){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: out of memory in "
++						"match, bailing.\n");
++			spin_unlock_bh(&l7_lock);
++			return (pattern_result ^ info->invert);
++		}
++		strcpy(master_conntrack->layer7.app_proto, info->protocol);
++	} else if(pattern_result > 1) { /* cleanup from "unset" */
++		pattern_result = 1;
++	}
++
++	/* mark the packet seen */
++	skb->cb[0] = 1;
++
++	spin_unlock_bh(&l7_lock);
++	return (pattern_result ^ info->invert);
++}
++
++// load nf_conntrack_ipv4
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++static bool check(const struct xt_mtchk_param *par)
++{
++        if (nf_ct_l3proto_try_module_get(par->match->family) < 0) {
++                printk(KERN_WARNING "can't load conntrack support for "
++                                    "proto=%d\n", par->match->family);
++#else
++static bool check(const char *tablename, const void *inf,
++		 const struct xt_match *match, void *matchinfo,
++		 unsigned int hook_mask)
++{
++        if (nf_ct_l3proto_try_module_get(match->family) < 0) {
++                printk(KERN_WARNING "can't load conntrack support for "
++                                    "proto=%d\n", match->family);
++#endif
++                return 0;
++        }
++	return 1;
++}
++
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++	static void destroy(const struct xt_mtdtor_param *par)
++	{
++		nf_ct_l3proto_module_put(par->match->family);
++	}
++#else
++	static void destroy(const struct xt_match *match, void *matchinfo)
++	{
++		nf_ct_l3proto_module_put(match->family);
++	}
++#endif
++
++static struct xt_match xt_layer7_match[] __read_mostly = {
++{
++	.name		= "layer7",
++	.family		= AF_INET,
++	.checkentry	= check,
++	.match		= match,
++	.destroy	= destroy,
++	.matchsize	= sizeof(struct xt_layer7_info),
++	.me		= THIS_MODULE
++}
++};
++
++static void layer7_cleanup_proc(void)
++{
++	remove_proc_entry("layer7_numpackets", init_net.proc_net);
++}
++
++/* register the proc file */
++static void layer7_init_proc(void)
++{
++	struct proc_dir_entry* entry;
++	entry = create_proc_entry("layer7_numpackets", 0644, init_net.proc_net);
++	entry->read_proc = layer7_read_proc;
++	entry->write_proc = layer7_write_proc;
++}
++
++static int __init xt_layer7_init(void)
++{
++	need_conntrack();
++
++	layer7_init_proc();
++	if(maxdatalen < 1) {
++		printk(KERN_WARNING "layer7: maxdatalen can't be < 1, "
++			"using 1\n");
++		maxdatalen = 1;
++	}
++	/* This is not a hard limit.  It's just here to prevent people from
++	bringing their slow machines to a grinding halt. */
++	else if(maxdatalen > 65536) {
++		printk(KERN_WARNING "layer7: maxdatalen can't be > 65536, "
++			"using 65536\n");
++		maxdatalen = 65536;
++	}
++	return xt_register_matches(xt_layer7_match,
++				   ARRAY_SIZE(xt_layer7_match));
++}
++
++static void __exit xt_layer7_fini(void)
++{
++	layer7_cleanup_proc();
++	xt_unregister_matches(xt_layer7_match, ARRAY_SIZE(xt_layer7_match));
++}
++
++module_init(xt_layer7_init);
++module_exit(xt_layer7_fini);
diff --git a/target/linux/generic/patches-2.6.35/101-netfilter_layer7_pktmatch.patch b/target/linux/generic/patches-2.6.35/101-netfilter_layer7_pktmatch.patch
new file mode 100644
index 0000000000..f65e301fd1
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/101-netfilter_layer7_pktmatch.patch
@@ -0,0 +1,108 @@
+--- a/include/linux/netfilter/xt_layer7.h
++++ b/include/linux/netfilter/xt_layer7.h
+@@ -8,6 +8,7 @@ struct xt_layer7_info {
+     char protocol[MAX_PROTOCOL_LEN];
+     char pattern[MAX_PATTERN_LEN];
+     u_int8_t invert;
++    u_int8_t pkt;
+ };
+ 
+ #endif /* _XT_LAYER7_H */
+--- a/net/netfilter/xt_layer7.c
++++ b/net/netfilter/xt_layer7.c
+@@ -314,33 +314,35 @@ static int match_no_append(struct nf_con
+ }
+ 
+ /* add the new app data to the conntrack.  Return number of bytes added. */
+-static int add_data(struct nf_conn * master_conntrack,
+-                    char * app_data, int appdatalen)
++static int add_datastr(char *target, int offset, char *app_data, int len)
+ {
+ 	int length = 0, i;
+-	int oldlength = master_conntrack->layer7.app_data_len;
+-
+-	/* This is a fix for a race condition by Deti Fliegl. However, I'm not 
+-	   clear on whether the race condition exists or whether this really 
+-	   fixes it.  I might just be being dense... Anyway, if it's not really 
+-	   a fix, all it does is waste a very small amount of time. */
+-	if(!master_conntrack->layer7.app_data) return 0;
++	if (!target) return 0;
+ 
+ 	/* Strip nulls. Make everything lower case (our regex lib doesn't
+ 	do case insensitivity).  Add it to the end of the current data. */
+-	for(i = 0; i < maxdatalen-oldlength-1 &&
+-		   i < appdatalen; i++) {
++ 	for(i = 0; i < maxdatalen-offset-1 && i < len; i++) {
+ 		if(app_data[i] != '\0') {
+ 			/* the kernel version of tolower mungs 'upper ascii' */
+-			master_conntrack->layer7.app_data[length+oldlength] =
++			target[length+offset] =
+ 				isascii(app_data[i])? 
+ 					tolower(app_data[i]) : app_data[i];
+ 			length++;
+ 		}
+ 	}
++	target[length+offset] = '\0';
++
++	return length;
++}
++
++/* add the new app data to the conntrack.  Return number of bytes added. */
++static int add_data(struct nf_conn * master_conntrack,
++                    char * app_data, int appdatalen)
++{
++	int length;
+ 
+-	master_conntrack->layer7.app_data[length+oldlength] = '\0';
+-	master_conntrack->layer7.app_data_len = length + oldlength;
++	length = add_datastr(master_conntrack->layer7.app_data, master_conntrack->layer7.app_data_len, app_data, appdatalen);
++	master_conntrack->layer7.app_data_len += length;
+ 
+ 	return length;
+ }
+@@ -438,7 +440,7 @@ match(const struct sk_buff *skbin,
+ 
+ 	enum ip_conntrack_info master_ctinfo, ctinfo;
+ 	struct nf_conn *master_conntrack, *conntrack;
+-	unsigned char * app_data;
++	unsigned char *app_data, *tmp_data;
+ 	unsigned int pattern_result, appdatalen;
+ 	regexp * comppattern;
+ 
+@@ -466,8 +468,8 @@ match(const struct sk_buff *skbin,
+ 		master_conntrack = master_ct(master_conntrack);
+ 
+ 	/* if we've classified it or seen too many packets */
+-	if(total_acct_packets(master_conntrack) > num_packets ||
+-	   master_conntrack->layer7.app_proto) {
++	if(!info->pkt && (total_acct_packets(master_conntrack) > num_packets ||
++	   master_conntrack->layer7.app_proto)) {
+ 
+ 		pattern_result = match_no_append(conntrack, master_conntrack, 
+ 						 ctinfo, master_ctinfo, info);
+@@ -500,6 +502,25 @@ match(const struct sk_buff *skbin,
+ 	/* the return value gets checked later, when we're ready to use it */
+ 	comppattern = compile_and_cache(info->pattern, info->protocol);
+ 
++	if (info->pkt) {
++		tmp_data = kmalloc(maxdatalen, GFP_ATOMIC);
++		if(!tmp_data){
++			if (net_ratelimit())
++				printk(KERN_ERR "layer7: out of memory in match, bailing.\n");
++			return info->invert;
++		}
++
++		tmp_data[0] = '\0';
++		add_datastr(tmp_data, 0, app_data, appdatalen);
++		pattern_result = ((comppattern && regexec(comppattern, tmp_data)) ? 1 : 0);
++
++		kfree(tmp_data);
++		tmp_data = NULL;
++		spin_unlock_bh(&l7_lock);
++
++		return (pattern_result ^ info->invert);
++	}
++
+ 	/* On the first packet of a connection, allocate space for app data */
+ 	if(total_acct_packets(master_conntrack) == 1 && !skb->cb[0] && 
+ 	   !master_conntrack->layer7.app_data){
diff --git a/target/linux/generic/patches-2.6.35/102-netfilter_layer7_match.patch b/target/linux/generic/patches-2.6.35/102-netfilter_layer7_match.patch
new file mode 100644
index 0000000000..15fc5fadd2
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/102-netfilter_layer7_match.patch
@@ -0,0 +1,25 @@
+--- a/net/netfilter/xt_layer7.c
++++ b/net/netfilter/xt_layer7.c
+@@ -415,7 +415,9 @@ static int layer7_write_proc(struct file
+ }
+ 
+ static bool
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35)
++match(const struct sk_buff *skbin, struct xt_action_param *par)
++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
+ match(const struct sk_buff *skbin, const struct xt_match_param *par)
+ #else
+ match(const struct sk_buff *skbin,
+@@ -598,7 +600,11 @@ match(const struct sk_buff *skbin,
+ 
+ // load nf_conntrack_ipv4
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
++#  if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35)
++static int check(const struct xt_mtchk_param *par)
++#  else
+ static bool check(const struct xt_mtchk_param *par)
++#  endif
+ {
+         if (nf_ct_l3proto_try_module_get(par->match->family) < 0) {
+                 printk(KERN_WARNING "can't load conntrack support for "
diff --git a/target/linux/generic/patches-2.6.35/110-netfilter_match_speedup.patch b/target/linux/generic/patches-2.6.35/110-netfilter_match_speedup.patch
new file mode 100644
index 0000000000..b688fda216
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/110-netfilter_match_speedup.patch
@@ -0,0 +1,130 @@
+--- a/include/linux/netfilter_ipv4/ip_tables.h
++++ b/include/linux/netfilter_ipv4/ip_tables.h
+@@ -62,6 +62,7 @@ struct ipt_ip {
+ #define IPT_F_FRAG		0x01	/* Set if rule is a fragment rule */
+ #define IPT_F_GOTO		0x02	/* Set if jump is a goto */
+ #define IPT_F_MASK		0x03	/* All possible flag bits mask. */
++#define IPT_F_NO_DEF_MATCH	0x80	/* Internal: no default match rules present */
+ 
+ /* Values for "inv" field in struct ipt_ip. */
+ #define IPT_INV_VIA_IN		0x01	/* Invert the sense of IN IFACE. */
+--- a/net/ipv4/netfilter/ip_tables.c
++++ b/net/ipv4/netfilter/ip_tables.c
+@@ -90,6 +90,9 @@ ip_packet_match(const struct iphdr *ip,
+ 
+ #define FWINV(bool, invflg) ((bool) ^ !!(ipinfo->invflags & (invflg)))
+ 
++	if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
++		return true;
++
+ 	if (FWINV((ip->saddr&ipinfo->smsk.s_addr) != ipinfo->src.s_addr,
+ 		  IPT_INV_SRCIP) ||
+ 	    FWINV((ip->daddr&ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr,
+@@ -140,13 +143,35 @@ ip_packet_match(const struct iphdr *ip,
+ 		return false;
+ 	}
+ 
++#undef FWINV
+ 	return true;
+ }
+ 
+ static bool
+-ip_checkentry(const struct ipt_ip *ip)
++ip_checkentry(struct ipt_ip *ip)
+ {
+-	if (ip->flags & ~IPT_F_MASK) {
++#define FWINV(bool, invflg) ((bool) || (ip->invflags & (invflg)))
++
++	if (FWINV(ip->smsk.s_addr, IPT_INV_SRCIP) ||
++		FWINV(ip->dmsk.s_addr, IPT_INV_DSTIP))
++		goto has_match_rules;
++
++	if (FWINV(!!((const unsigned long *)ip->iniface_mask)[0],
++		IPT_INV_VIA_IN) ||
++	    FWINV(!!((const unsigned long *)ip->outiface_mask)[0],
++		IPT_INV_VIA_OUT))
++		goto has_match_rules;
++
++	if (FWINV(ip->proto, IPT_INV_PROTO))
++		goto has_match_rules;
++
++	if (FWINV(ip->flags&IPT_F_FRAG, IPT_INV_FRAG))
++		goto has_match_rules;
++
++	ip->flags |= IPT_F_NO_DEF_MATCH;
++
++has_match_rules:
++	if (ip->flags & ~(IPT_F_MASK|IPT_F_NO_DEF_MATCH)) {
+ 		duprintf("Unknown flag bits set: %08X\n",
+ 			 ip->flags & ~IPT_F_MASK);
+ 		return false;
+@@ -156,6 +181,8 @@ ip_checkentry(const struct ipt_ip *ip)
+ 			 ip->invflags & ~IPT_INV_MASK);
+ 		return false;
+ 	}
++
++#undef FWINV
+ 	return true;
+ }
+ 
+@@ -182,7 +209,6 @@ static inline bool unconditional(const s
+ 	static const struct ipt_ip uncond;
+ 
+ 	return memcmp(ip, &uncond, sizeof(uncond)) == 0;
+-#undef FWINV
+ }
+ 
+ /* for const-correctness */
+@@ -312,8 +338,28 @@ ipt_do_table(struct sk_buff *skb,
+ 	const struct xt_table_info *private;
+ 	struct xt_action_param acpar;
+ 
+-	/* Initialization */
+ 	ip = ip_hdr(skb);
++
++	IP_NF_ASSERT(table->valid_hooks & (1 << hook));
++	xt_info_rdlock_bh();
++	private = table->private;
++	table_base = private->entries[smp_processor_id()];
++	e = get_entry(table_base, private->hook_entry[hook]);
++
++	if (e->target_offset <= sizeof(struct ipt_entry) &&
++		(e->ip.flags & IPT_F_NO_DEF_MATCH)) {
++			struct ipt_entry_target *t = ipt_get_target(e);
++			if (!t->u.kernel.target->target) {
++				int v = ((struct ipt_standard_target *)t)->verdict;
++				if ((v < 0) && (v != IPT_RETURN)) {
++					ADD_COUNTER(e->counters, ntohs(ip->tot_len), 1);
++					xt_info_rdunlock_bh();
++					return (unsigned)(-v) - 1;
++				}
++			}
++	}
++
++	/* Initialization */
+ 	indev = in ? in->name : nulldevname;
+ 	outdev = out ? out->name : nulldevname;
+ 	/* We handle fragments by dealing with the first fragment as
+@@ -970,6 +1016,7 @@ copy_entries_to_user(unsigned int total_
+ 		unsigned int i;
+ 		const struct ipt_entry_match *m;
+ 		const struct ipt_entry_target *t;
++		u8 flags;
+ 
+ 		e = (struct ipt_entry *)(loc_cpu_entry + off);
+ 		if (copy_to_user(userptr + off
+@@ -979,6 +1026,14 @@ copy_entries_to_user(unsigned int total_
+ 			ret = -EFAULT;
+ 			goto free_counters;
+ 		}
++
++		flags = e->ip.flags & ~IPT_F_NO_DEF_MATCH;
++		if (copy_to_user(userptr + off
++				 + offsetof(struct ipt_entry, ip.flags),
++				 &flags, sizeof(flags)) != 0) {
++			ret = -EFAULT;
++			goto free_counters;
++		}
+ 
+ 		for (i = sizeof(struct ipt_entry);
+ 		     i < e->target_offset;
diff --git a/target/linux/generic/patches-2.6.35/180-netfilter_depends.patch b/target/linux/generic/patches-2.6.35/180-netfilter_depends.patch
new file mode 100644
index 0000000000..1bda13d191
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/180-netfilter_depends.patch
@@ -0,0 +1,18 @@
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -173,7 +173,6 @@ config NF_CONNTRACK_FTP
+ 
+ config NF_CONNTRACK_H323
+ 	tristate "H.323 protocol support"
+-	depends on (IPV6 || IPV6=n)
+ 	depends on NETFILTER_ADVANCED
+ 	help
+ 	  H.323 is a VoIP signalling protocol from ITU-T. As one of the most
+@@ -530,7 +529,6 @@ config NETFILTER_XT_TARGET_SECMARK
+ 
+ config NETFILTER_XT_TARGET_TCPMSS
+ 	tristate '"TCPMSS" target support'
+-	depends on (IPV6 || IPV6=n)
+ 	default m if NETFILTER_ADVANCED=n
+ 	---help---
+ 	  This option adds a `TCPMSS' target, which allows you to alter the
diff --git a/target/linux/generic/patches-2.6.35/190-netfilter_rtsp.patch b/target/linux/generic/patches-2.6.35/190-netfilter_rtsp.patch
new file mode 100644
index 0000000000..68792936bb
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/190-netfilter_rtsp.patch
@@ -0,0 +1,1366 @@
+--- /dev/null
++++ b/include/linux/netfilter/nf_conntrack_rtsp.h
+@@ -0,0 +1,63 @@
++/*
++ * RTSP extension for IP connection tracking.
++ * (C) 2003 by Tom Marshall <tmarshall at real.com>
++ * based on ip_conntrack_irc.h
++ *
++ *      This program is free software; you can redistribute it and/or
++ *      modify it under the terms of the GNU General Public License
++ *      as published by the Free Software Foundation; either version
++ *      2 of the License, or (at your option) any later version.
++ */
++#ifndef _IP_CONNTRACK_RTSP_H
++#define _IP_CONNTRACK_RTSP_H
++
++//#define IP_NF_RTSP_DEBUG 1
++#define IP_NF_RTSP_VERSION "0.6.21"
++
++#ifdef __KERNEL__
++/* port block types */
++typedef enum {
++    pb_single,  /* client_port=x */
++    pb_range,   /* client_port=x-y */
++    pb_discon   /* client_port=x/y (rtspbis) */
++} portblock_t;
++
++/* We record seq number and length of rtsp headers here, all in host order. */
++
++/*
++ * This structure is per expected connection.  It is a member of struct
++ * ip_conntrack_expect.  The TCP SEQ for the conntrack expect is stored
++ * there and we are expected to only store the length of the data which
++ * needs replaced.  If a packet contains multiple RTSP messages, we create
++ * one expected connection per message.
++ *
++ * We use these variables to mark the entire header block.  This may seem
++ * like overkill, but the nature of RTSP requires it.  A header may appear
++ * multiple times in a message.  We must treat two Transport headers the
++ * same as one Transport header with two entries.
++ */
++struct ip_ct_rtsp_expect
++{
++    u_int32_t   len;        /* length of header block */
++    portblock_t pbtype;     /* Type of port block that was requested */
++    u_int16_t   loport;     /* Port that was requested, low or first */
++    u_int16_t   hiport;     /* Port that was requested, high or second */
++#if 0
++    uint        method;     /* RTSP method */
++    uint        cseq;       /* CSeq from request */
++#endif
++};
++
++extern unsigned int (*nf_nat_rtsp_hook)(struct sk_buff *skb,
++				 enum ip_conntrack_info ctinfo,
++				 unsigned int matchoff, unsigned int matchlen,
++				 struct ip_ct_rtsp_expect *prtspexp,
++				 struct nf_conntrack_expect *exp);
++
++extern void (*nf_nat_rtsp_hook_expectfn)(struct nf_conn *ct, struct nf_conntrack_expect *exp);
++
++#define RTSP_PORT   554
++
++#endif /* __KERNEL__ */
++
++#endif /* _IP_CONNTRACK_RTSP_H */
+--- /dev/null
++++ b/include/linux/netfilter_helpers.h
+@@ -0,0 +1,133 @@
++/*
++ * Helpers for netfiler modules.  This file provides implementations for basic
++ * functions such as strncasecmp(), etc.
++ *
++ * gcc will warn for defined but unused functions, so we only include the
++ * functions requested.  The following macros are used:
++ *   NF_NEED_STRNCASECMP        nf_strncasecmp()
++ *   NF_NEED_STRTOU16           nf_strtou16()
++ *   NF_NEED_STRTOU32           nf_strtou32()
++ */
++#ifndef _NETFILTER_HELPERS_H
++#define _NETFILTER_HELPERS_H
++
++/* Only include these functions for kernel code. */
++#ifdef __KERNEL__
++
++#include <linux/ctype.h>
++#define iseol(c) ( (c) == '\r' || (c) == '\n' )
++
++/*
++ * The standard strncasecmp()
++ */
++#ifdef NF_NEED_STRNCASECMP
++static int
++nf_strncasecmp(const char* s1, const char* s2, u_int32_t len)
++{
++    if (s1 == NULL || s2 == NULL)
++    {
++        if (s1 == NULL && s2 == NULL)
++        {
++            return 0;
++        }
++        return (s1 == NULL) ? -1 : 1;
++    }
++    while (len > 0 && tolower(*s1) == tolower(*s2))
++    {
++        len--;
++        s1++;
++        s2++;
++    }
++    return ( (len == 0) ? 0 : (tolower(*s1) - tolower(*s2)) );
++}
++#endif /* NF_NEED_STRNCASECMP */
++
++/*
++ * Parse a string containing a 16-bit unsigned integer.
++ * Returns the number of chars used, or zero if no number is found.
++ */
++#ifdef NF_NEED_STRTOU16
++static int
++nf_strtou16(const char* pbuf, u_int16_t* pval)
++{
++    int n = 0;
++
++    *pval = 0;
++    while (isdigit(pbuf[n]))
++    {
++        *pval = (*pval * 10) + (pbuf[n] - '0');
++        n++;
++    }
++
++    return n;
++}
++#endif /* NF_NEED_STRTOU16 */
++
++/*
++ * Parse a string containing a 32-bit unsigned integer.
++ * Returns the number of chars used, or zero if no number is found.
++ */
++#ifdef NF_NEED_STRTOU32
++static int
++nf_strtou32(const char* pbuf, u_int32_t* pval)
++{
++    int n = 0;
++
++    *pval = 0;
++    while (pbuf[n] >= '0' && pbuf[n] <= '9')
++    {
++        *pval = (*pval * 10) + (pbuf[n] - '0');
++        n++;
++    }
++
++    return n;
++}
++#endif /* NF_NEED_STRTOU32 */
++
++/*
++ * Given a buffer and length, advance to the next line and mark the current
++ * line.
++ */
++#ifdef NF_NEED_NEXTLINE
++static int
++nf_nextline(char* p, uint len, uint* poff, uint* plineoff, uint* plinelen)
++{
++    uint    off = *poff;
++    uint    physlen = 0;
++
++    if (off >= len)
++    {
++        return 0;
++    }
++
++    while (p[off] != '\n')
++    {
++        if (len-off <= 1)
++        {
++            return 0;
++        }
++
++        physlen++;
++        off++;
++    }
++
++    /* if we saw a crlf, physlen needs adjusted */
++    if (physlen > 0 && p[off] == '\n' && p[off-1] == '\r')
++    {
++        physlen--;
++    }
++
++    /* advance past the newline */
++    off++;
++
++    *plineoff = *poff;
++    *plinelen = physlen;
++    *poff = off;
++
++    return 1;
++}
++#endif /* NF_NEED_NEXTLINE */
++
++#endif /* __KERNEL__ */
++
++#endif /* _NETFILTER_HELPERS_H */
+--- /dev/null
++++ b/include/linux/netfilter_mime.h
+@@ -0,0 +1,89 @@
++/*
++ * MIME functions for netfilter modules.  This file provides implementations
++ * for basic MIME parsing.  MIME headers are used in many protocols, such as
++ * HTTP, RTSP, SIP, etc.
++ *
++ * gcc will warn for defined but unused functions, so we only include the
++ * functions requested.  The following macros are used:
++ *   NF_NEED_MIME_NEXTLINE      nf_mime_nextline()
++ */
++#ifndef _NETFILTER_MIME_H
++#define _NETFILTER_MIME_H
++
++/* Only include these functions for kernel code. */
++#ifdef __KERNEL__
++
++#include <linux/ctype.h>
++
++/*
++ * Given a buffer and length, advance to the next line and mark the current
++ * line.  If the current line is empty, *plinelen will be set to zero.  If
++ * not, it will be set to the actual line length (including CRLF).
++ *
++ * 'line' in this context means logical line (includes LWS continuations).
++ * Returns 1 on success, 0 on failure.
++ */
++#ifdef NF_NEED_MIME_NEXTLINE
++static int
++nf_mime_nextline(char* p, uint len, uint* poff, uint* plineoff, uint* plinelen)
++{
++    uint    off = *poff;
++    uint    physlen = 0;
++    int     is_first_line = 1;
++
++    if (off >= len)
++    {
++        return 0;
++    }
++
++    do
++    {
++        while (p[off] != '\n')
++        {
++            if (len-off <= 1)
++            {
++                return 0;
++            }
++
++            physlen++;
++            off++;
++        }
++
++        /* if we saw a crlf, physlen needs adjusted */
++        if (physlen > 0 && p[off] == '\n' && p[off-1] == '\r')
++        {
++            physlen--;
++        }
++
++        /* advance past the newline */
++        off++;
++
++        /* check for an empty line */
++        if (physlen == 0)
++        {
++            break;
++        }
++
++        /* check for colon on the first physical line */
++        if (is_first_line)
++        {
++            is_first_line = 0;
++            if (memchr(p+(*poff), ':', physlen) == NULL)
++            {
++                return 0;
++            }
++        }
++    }
++    while (p[off] == ' ' || p[off] == '\t');
++
++    *plineoff = *poff;
++    *plinelen = (physlen == 0) ? 0 : (off - *poff);
++    *poff = off;
++
++    return 1;
++}
++#endif /* NF_NEED_MIME_NEXTLINE */
++
++#endif /* __KERNEL__ */
++
++#endif /* _NETFILTER_MIME_H */
+--- a/net/ipv4/netfilter/Makefile
++++ b/net/ipv4/netfilter/Makefile
+@@ -26,6 +26,7 @@ obj-$(CONFIG_NF_NAT_AMANDA) += nf_nat_am
+ obj-$(CONFIG_NF_NAT_FTP) += nf_nat_ftp.o
+ obj-$(CONFIG_NF_NAT_H323) += nf_nat_h323.o
+ obj-$(CONFIG_NF_NAT_IRC) += nf_nat_irc.o
++obj-$(CONFIG_NF_NAT_RTSP) += nf_nat_rtsp.o
+ obj-$(CONFIG_NF_NAT_PPTP) += nf_nat_pptp.o
+ obj-$(CONFIG_NF_NAT_SIP) += nf_nat_sip.o
+ obj-$(CONFIG_NF_NAT_SNMP_BASIC) += nf_nat_snmp_basic.o
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -280,6 +280,16 @@ config NF_CONNTRACK_TFTP
+ 
+ 	  To compile it as a module, choose M here.  If unsure, say N.
+ 
++config NF_CONNTRACK_RTSP
++	tristate "RTSP protocol support"
++	depends on NF_CONNTRACK
++	help
++		Support the RTSP protocol.  This allows UDP transports to be setup
++		properly, including RTP and RDT.
++
++		If you want to compile it as a module, say 'M' here and read
++		Documentation/modules.txt.  If unsure, say 'Y'.
++
+ config NF_CT_NETLINK
+ 	tristate 'Connection tracking netlink interface'
+ 	select NETFILTER_NETLINK
+--- a/net/netfilter/Makefile
++++ b/net/netfilter/Makefile
+@@ -33,6 +33,7 @@ obj-$(CONFIG_NF_CONNTRACK_PPTP) += nf_co
+ obj-$(CONFIG_NF_CONNTRACK_SANE) += nf_conntrack_sane.o
+ obj-$(CONFIG_NF_CONNTRACK_SIP) += nf_conntrack_sip.o
+ obj-$(CONFIG_NF_CONNTRACK_TFTP) += nf_conntrack_tftp.o
++obj-$(CONFIG_NF_CONNTRACK_RTSP) += nf_conntrack_rtsp.o
+ 
+ # transparent proxy support
+ obj-$(CONFIG_NETFILTER_TPROXY) += nf_tproxy_core.o
+--- a/net/ipv4/netfilter/Kconfig
++++ b/net/ipv4/netfilter/Kconfig
+@@ -257,6 +257,11 @@ config NF_NAT_IRC
+ 	depends on NF_CONNTRACK && NF_NAT
+ 	default NF_NAT && NF_CONNTRACK_IRC
+ 
++config NF_NAT_RTSP
++	tristate
++ 	depends on IP_NF_IPTABLES && NF_CONNTRACK && NF_NAT
++ 	default NF_NAT && NF_CONNTRACK_RTSP
++
+ config NF_NAT_TFTP
+ 	tristate
+ 	depends on NF_CONNTRACK && NF_NAT
+--- /dev/null
++++ b/net/netfilter/nf_conntrack_rtsp.c
+@@ -0,0 +1,517 @@
++/*
++ * RTSP extension for IP connection tracking
++ * (C) 2003 by Tom Marshall <tmarshall at real.com>
++ * based on ip_conntrack_irc.c
++ *
++ *      This program is free software; you can redistribute it and/or
++ *      modify it under the terms of the GNU General Public License
++ *      as published by the Free Software Foundation; either version
++ *      2 of the License, or (at your option) any later version.
++ *
++ * Module load syntax:
++ *   insmod nf_conntrack_rtsp.o ports=port1,port2,...port<MAX_PORTS>
++ *                              max_outstanding=n setup_timeout=secs
++ *
++ * If no ports are specified, the default will be port 554.
++ *
++ * With max_outstanding you can define the maximum number of not yet
++ * answered SETUP requests per RTSP session (default 8).
++ * With setup_timeout you can specify how long the system waits for
++ * an expected data channel (default 300 seconds).
++ *
++ * 2005-02-13: Harald Welte <laforge at netfilter.org>
++ * 	- port to 2.6
++ * 	- update to recent post-2.6.11 api changes
++ * 2006-09-14: Steven Van Acker <deepstar at singularity.be>
++ *      - removed calls to NAT code from conntrack helper: NAT no longer needed to use rtsp-conntrack
++ * 2007-04-18: Michael Guntsche <mike at it-loops.com>
++ * 			- Port to new NF API
++ */
++
++#include <linux/module.h>
++#include <linux/netfilter.h>
++#include <linux/ip.h>
++#include <linux/inet.h>
++#include <net/tcp.h>
++
++#include <net/netfilter/nf_conntrack.h>
++#include <net/netfilter/nf_conntrack_expect.h>
++#include <net/netfilter/nf_conntrack_helper.h>
++#include <linux/netfilter/nf_conntrack_rtsp.h>
++
++#define NF_NEED_STRNCASECMP
++#define NF_NEED_STRTOU16
++#define NF_NEED_STRTOU32
++#define NF_NEED_NEXTLINE
++#include <linux/netfilter_helpers.h>
++#define NF_NEED_MIME_NEXTLINE
++#include <linux/netfilter_mime.h>
++
++#include <linux/ctype.h>
++#define MAX_SIMUL_SETUP 8 /* XXX: use max_outstanding */
++#define INFOP(fmt, args...) printk(KERN_INFO "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
++#if 0
++#define DEBUGP(fmt, args...) printk(KERN_DEBUG "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
++#else
++#define DEBUGP(fmt, args...)
++#endif
++
++#define MAX_PORTS 8
++static int ports[MAX_PORTS];
++static int num_ports = 0;
++static int max_outstanding = 8;
++static unsigned int setup_timeout = 300;
++
++MODULE_AUTHOR("Tom Marshall <tmarshall at real.com>");
++MODULE_DESCRIPTION("RTSP connection tracking module");
++MODULE_LICENSE("GPL");
++module_param_array(ports, int, &num_ports, 0400);
++MODULE_PARM_DESC(ports, "port numbers of RTSP servers");
++module_param(max_outstanding, int, 0400);
++MODULE_PARM_DESC(max_outstanding, "max number of outstanding SETUP requests per RTSP session");
++module_param(setup_timeout, int, 0400);
++MODULE_PARM_DESC(setup_timeout, "timeout on for unestablished data channels");
++
++static char *rtsp_buffer;
++static DEFINE_SPINLOCK(rtsp_buffer_lock);
++
++unsigned int (*nf_nat_rtsp_hook)(struct sk_buff *skb,
++				 enum ip_conntrack_info ctinfo,
++				 unsigned int matchoff, unsigned int matchlen,struct ip_ct_rtsp_expect* prtspexp,
++				 struct nf_conntrack_expect *exp);
++void (*nf_nat_rtsp_hook_expectfn)(struct nf_conn *ct, struct nf_conntrack_expect *exp);
++
++EXPORT_SYMBOL_GPL(nf_nat_rtsp_hook);
++
++/*
++ * Max mappings we will allow for one RTSP connection (for RTP, the number
++ * of allocated ports is twice this value).  Note that SMIL burns a lot of
++ * ports so keep this reasonably high.  If this is too low, you will see a
++ * lot of "no free client map entries" messages.
++ */
++#define MAX_PORT_MAPS 16
++
++/*** default port list was here in the masq code: 554, 3030, 4040 ***/
++
++#define SKIP_WSPACE(ptr,len,off) while(off < len && isspace(*(ptr+off))) { off++; }
++
++/*
++ * Parse an RTSP packet.
++ *
++ * Returns zero if parsing failed.
++ *
++ * Parameters:
++ *  IN      ptcp        tcp data pointer
++ *  IN      tcplen      tcp data len
++ *  IN/OUT  ptcpoff     points to current tcp offset
++ *  OUT     phdrsoff    set to offset of rtsp headers
++ *  OUT     phdrslen    set to length of rtsp headers
++ *  OUT     pcseqoff    set to offset of CSeq header
++ *  OUT     pcseqlen    set to length of CSeq header
++ */
++static int
++rtsp_parse_message(char* ptcp, uint tcplen, uint* ptcpoff,
++                   uint* phdrsoff, uint* phdrslen,
++                   uint* pcseqoff, uint* pcseqlen,
++                   uint* transoff, uint* translen)
++{
++	uint    entitylen = 0;
++	uint    lineoff;
++	uint    linelen;
++
++	if (!nf_nextline(ptcp, tcplen, ptcpoff, &lineoff, &linelen))
++		return 0;
++
++	*phdrsoff = *ptcpoff;
++	while (nf_mime_nextline(ptcp, tcplen, ptcpoff, &lineoff, &linelen)) {
++		if (linelen == 0) {
++			if (entitylen > 0)
++				*ptcpoff += min(entitylen, tcplen - *ptcpoff);
++			break;
++		}
++		if (lineoff+linelen > tcplen) {
++			INFOP("!! overrun !!\n");
++			break;
++		}
++
++		if (nf_strncasecmp(ptcp+lineoff, "CSeq:", 5) == 0) {
++			*pcseqoff = lineoff;
++			*pcseqlen = linelen;
++		}
++
++		if (nf_strncasecmp(ptcp+lineoff, "Transport:", 10) == 0) {
++			*transoff = lineoff;
++			*translen = linelen;
++		}
++
++		if (nf_strncasecmp(ptcp+lineoff, "Content-Length:", 15) == 0) {
++			uint off = lineoff+15;
++			SKIP_WSPACE(ptcp+lineoff, linelen, off);
++			nf_strtou32(ptcp+off, &entitylen);
++		}
++	}
++	*phdrslen = (*ptcpoff) - (*phdrsoff);
++
++	return 1;
++}
++
++/*
++ * Find lo/hi client ports (if any) in transport header
++ * In:
++ *   ptcp, tcplen = packet
++ *   tranoff, tranlen = buffer to search
++ *
++ * Out:
++ *   pport_lo, pport_hi = lo/hi ports (host endian)
++ *
++ * Returns nonzero if any client ports found
++ *
++ * Note: it is valid (and expected) for the client to request multiple
++ * transports, so we need to parse the entire line.
++ */
++static int
++rtsp_parse_transport(char* ptran, uint tranlen,
++                     struct ip_ct_rtsp_expect* prtspexp)
++{
++	int     rc = 0;
++	uint    off = 0;
++
++	if (tranlen < 10 || !iseol(ptran[tranlen-1]) ||
++	    nf_strncasecmp(ptran, "Transport:", 10) != 0) {
++		INFOP("sanity check failed\n");
++		return 0;
++	}
++
++	DEBUGP("tran='%.*s'\n", (int)tranlen, ptran);
++	off += 10;
++	SKIP_WSPACE(ptran, tranlen, off);
++
++	/* Transport: tran;field;field=val,tran;field;field=val,... */
++	while (off < tranlen) {
++		const char* pparamend;
++		uint        nextparamoff;
++
++		pparamend = memchr(ptran+off, ',', tranlen-off);
++		pparamend = (pparamend == NULL) ? ptran+tranlen : pparamend+1;
++		nextparamoff = pparamend-ptran;
++
++		while (off < nextparamoff) {
++			const char* pfieldend;
++			uint        nextfieldoff;
++
++			pfieldend = memchr(ptran+off, ';', nextparamoff-off);
++			nextfieldoff = (pfieldend == NULL) ? nextparamoff : pfieldend-ptran+1;
++
++			if (strncmp(ptran+off, "client_port=", 12) == 0) {
++				u_int16_t   port;
++				uint        numlen;
++
++				off += 12;
++				numlen = nf_strtou16(ptran+off, &port);
++				off += numlen;
++				if (prtspexp->loport != 0 && prtspexp->loport != port)
++					DEBUGP("multiple ports found, port %hu ignored\n", port);
++				else {
++					DEBUGP("lo port found : %hu\n", port);
++					prtspexp->loport = prtspexp->hiport = port;
++					if (ptran[off] == '-') {
++						off++;
++						numlen = nf_strtou16(ptran+off, &port);
++						off += numlen;
++						prtspexp->pbtype = pb_range;
++						prtspexp->hiport = port;
++
++						// If we have a range, assume rtp:
++						// loport must be even, hiport must be loport+1
++						if ((prtspexp->loport & 0x0001) != 0 ||
++						    prtspexp->hiport != prtspexp->loport+1) {
++							DEBUGP("incorrect range: %hu-%hu, correcting\n",
++							       prtspexp->loport, prtspexp->hiport);
++							prtspexp->loport &= 0xfffe;
++							prtspexp->hiport = prtspexp->loport+1;
++						}
++					} else if (ptran[off] == '/') {
++						off++;
++						numlen = nf_strtou16(ptran+off, &port);
++						off += numlen;
++						prtspexp->pbtype = pb_discon;
++						prtspexp->hiport = port;
++					}
++					rc = 1;
++				}
++			}
++
++			/*
++			 * Note we don't look for the destination parameter here.
++			 * If we are using NAT, the NAT module will handle it.  If not,
++			 * and the client is sending packets elsewhere, the expectation
++			 * will quietly time out.
++			 */
++
++			off = nextfieldoff;
++		}
++
++		off = nextparamoff;
++	}
++
++	return rc;
++}
++
++void expected(struct nf_conn *ct, struct nf_conntrack_expect *exp)
++{
++    if(nf_nat_rtsp_hook_expectfn) {
++        nf_nat_rtsp_hook_expectfn(ct,exp);
++    }
++}
++
++/*** conntrack functions ***/
++
++/* outbound packet: client->server */
++
++static inline int
++help_out(struct sk_buff *skb, unsigned char *rb_ptr, unsigned int datalen,
++                struct nf_conn *ct, enum ip_conntrack_info ctinfo)
++{
++	struct ip_ct_rtsp_expect expinfo;
++
++	int dir = CTINFO2DIR(ctinfo);   /* = IP_CT_DIR_ORIGINAL */
++	//struct  tcphdr* tcph = (void*)iph + iph->ihl * 4;
++	//uint    tcplen = pktlen - iph->ihl * 4;
++	char*   pdata = rb_ptr;
++	//uint    datalen = tcplen - tcph->doff * 4;
++	uint    dataoff = 0;
++	int ret = NF_ACCEPT;
++
++	struct nf_conntrack_expect *exp;
++
++	__be16 be_loport;
++
++	memset(&expinfo, 0, sizeof(expinfo));
++
++	while (dataoff < datalen) {
++		uint    cmdoff = dataoff;
++		uint    hdrsoff = 0;
++		uint    hdrslen = 0;
++		uint    cseqoff = 0;
++		uint    cseqlen = 0;
++		uint    transoff = 0;
++		uint    translen = 0;
++		uint    off;
++
++		if (!rtsp_parse_message(pdata, datalen, &dataoff,
++					&hdrsoff, &hdrslen,
++					&cseqoff, &cseqlen,
++					&transoff, &translen))
++			break;      /* not a valid message */
++
++		if (strncmp(pdata+cmdoff, "SETUP ", 6) != 0)
++			continue;   /* not a SETUP message */
++		DEBUGP("found a setup message\n");
++
++		off = 0;
++		if(translen) {
++			rtsp_parse_transport(pdata+transoff, translen, &expinfo);
++		}
++
++		if (expinfo.loport == 0) {
++			DEBUGP("no udp transports found\n");
++			continue;   /* no udp transports found */
++		}
++
++		DEBUGP("udp transport found, ports=(%d,%hu,%hu)\n",
++		       (int)expinfo.pbtype, expinfo.loport, expinfo.hiport);
++
++		exp = nf_ct_expect_alloc(ct);
++		if (!exp) {
++			ret = NF_DROP;
++			goto out;
++		}
++
++		be_loport = htons(expinfo.loport);
++
++		nf_ct_expect_init(exp, NF_CT_EXPECT_CLASS_DEFAULT,
++			ct->tuplehash[!dir].tuple.src.l3num,
++			&ct->tuplehash[!dir].tuple.src.u3, &ct->tuplehash[!dir].tuple.dst.u3,
++			IPPROTO_UDP, NULL, &be_loport);
++
++		exp->master = ct;
++
++		exp->expectfn = expected;
++		exp->flags = 0;
++
++		if (expinfo.pbtype == pb_range) {
++			DEBUGP("Changing expectation mask to handle multiple ports\n");
++			exp->mask.src.u.udp.port  = 0xfffe;
++		}
++
++		DEBUGP("expect_related %u.%u.%u.%u:%u-%u.%u.%u.%u:%u\n",
++		       NIPQUAD(exp->tuple.src.u3.ip),
++		       ntohs(exp->tuple.src.u.udp.port),
++		       NIPQUAD(exp->tuple.dst.u3.ip),
++		       ntohs(exp->tuple.dst.u.udp.port));
++
++		if (nf_nat_rtsp_hook)
++			/* pass the request off to the nat helper */
++			ret = nf_nat_rtsp_hook(skb, ctinfo, hdrsoff, hdrslen, &expinfo, exp);
++		else if (nf_ct_expect_related(exp) != 0) {
++			INFOP("nf_ct_expect_related failed\n");
++			ret  = NF_DROP;
++		}
++		nf_ct_expect_put(exp);
++		goto out;
++	}
++out:
++
++	return ret;
++}
++
++
++static inline int
++help_in(struct sk_buff *skb, size_t pktlen,
++ struct nf_conn* ct, enum ip_conntrack_info ctinfo)
++{
++ return NF_ACCEPT;
++}
++
++static int help(struct sk_buff *skb, unsigned int protoff,
++		struct nf_conn *ct, enum ip_conntrack_info ctinfo)
++{
++	struct tcphdr _tcph, *th;
++	unsigned int dataoff, datalen;
++	char *rb_ptr;
++	int ret = NF_DROP;
++
++	/* Until there's been traffic both ways, don't look in packets. */
++	if (ctinfo != IP_CT_ESTABLISHED &&
++	    ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY) {
++		DEBUGP("conntrackinfo = %u\n", ctinfo);
++		return NF_ACCEPT;
++	}
++
++	/* Not whole TCP header? */
++	th = skb_header_pointer(skb, protoff, sizeof(_tcph), &_tcph);
++
++	if (!th)
++		return NF_ACCEPT;
++
++	/* No data ? */
++	dataoff = protoff + th->doff*4;
++	datalen = skb->len - dataoff;
++	if (dataoff >= skb->len)
++		return NF_ACCEPT;
++
++	spin_lock_bh(&rtsp_buffer_lock);
++	rb_ptr = skb_header_pointer(skb, dataoff,
++				    skb->len - dataoff, rtsp_buffer);
++	BUG_ON(rb_ptr == NULL);
++
++#if 0
++	/* Checksum invalid?  Ignore. */
++	/* FIXME: Source route IP option packets --RR */
++	if (tcp_v4_check(tcph, tcplen, iph->saddr, iph->daddr,
++			 csum_partial((char*)tcph, tcplen, 0)))
++	{
++		DEBUGP("bad csum: %p %u %u.%u.%u.%u %u.%u.%u.%u\n",
++		       tcph, tcplen, NIPQUAD(iph->saddr), NIPQUAD(iph->daddr));
++		return NF_ACCEPT;
++	}
++#endif
++
++	switch (CTINFO2DIR(ctinfo)) {
++	case IP_CT_DIR_ORIGINAL:
++		ret = help_out(skb, rb_ptr, datalen, ct, ctinfo);
++		break;
++	case IP_CT_DIR_REPLY:
++		DEBUGP("IP_CT_DIR_REPLY\n");
++		/* inbound packet: server->client */
++		ret = NF_ACCEPT;
++		break;
++	}
++
++	spin_unlock_bh(&rtsp_buffer_lock);
++
++	return ret;
++}
++
++static struct nf_conntrack_helper rtsp_helpers[MAX_PORTS];
++static char rtsp_names[MAX_PORTS][10];
++static struct nf_conntrack_expect_policy rtsp_expect_policy;
++
++/* This function is intentionally _NOT_ defined as __exit */
++static void
++fini(void)
++{
++	int i;
++	for (i = 0; i < num_ports; i++) {
++		DEBUGP("unregistering port %d\n", ports[i]);
++		nf_conntrack_helper_unregister(&rtsp_helpers[i]);
++	}
++	kfree(rtsp_buffer);
++}
++
++static int __init
++init(void)
++{
++	int i, ret;
++	struct nf_conntrack_helper *hlpr;
++	char *tmpname;
++
++	printk("nf_conntrack_rtsp v" IP_NF_RTSP_VERSION " loading\n");
++
++	if (max_outstanding < 1) {
++		printk("nf_conntrack_rtsp: max_outstanding must be a positive integer\n");
++		return -EBUSY;
++	}
++	if (setup_timeout < 0) {
++		printk("nf_conntrack_rtsp: setup_timeout must be a positive integer\n");
++		return -EBUSY;
++	}
++
++	rtsp_expect_policy.max_expected = max_outstanding;
++	rtsp_expect_policy.timeout = setup_timeout;
++
++	rtsp_buffer = kmalloc(65536, GFP_KERNEL);
++	if (!rtsp_buffer)
++		return -ENOMEM;
++
++	/* If no port given, default to standard rtsp port */
++	if (ports[0] == 0) {
++		ports[0] = RTSP_PORT;
++	}
++
++	for (i = 0; (i < MAX_PORTS) && ports[i]; i++) {
++		hlpr = &rtsp_helpers[i];
++		memset(hlpr, 0, sizeof(struct nf_conntrack_helper));
++		hlpr->tuple.src.u.tcp.port = htons(ports[i]);
++		hlpr->tuple.dst.protonum = IPPROTO_TCP;
++		hlpr->expect_policy = &rtsp_expect_policy;
++		hlpr->me = THIS_MODULE;
++		hlpr->help = help;
++
++		tmpname = &rtsp_names[i][0];
++		if (ports[i] == RTSP_PORT) {
++			sprintf(tmpname, "rtsp");
++		} else {
++			sprintf(tmpname, "rtsp-%d", i);
++		}
++		hlpr->name = tmpname;
++
++		DEBUGP("port #%d: %d\n", i, ports[i]);
++
++		ret = nf_conntrack_helper_register(hlpr);
++
++		if (ret) {
++			printk("nf_conntrack_rtsp: ERROR registering port %d\n", ports[i]);
++			fini();
++			return -EBUSY;
++		}
++		num_ports++;
++	}
++	return 0;
++}
++
++module_init(init);
++module_exit(fini);
++
++EXPORT_SYMBOL(nf_nat_rtsp_hook_expectfn);
++
+--- /dev/null
++++ b/net/ipv4/netfilter/nf_nat_rtsp.c
+@@ -0,0 +1,496 @@
++/*
++ * RTSP extension for TCP NAT alteration
++ * (C) 2003 by Tom Marshall <tmarshall at real.com>
++ * based on ip_nat_irc.c
++ *
++ *      This program is free software; you can redistribute it and/or
++ *      modify it under the terms of the GNU General Public License
++ *      as published by the Free Software Foundation; either version
++ *      2 of the License, or (at your option) any later version.
++ *
++ * Module load syntax:
++ *      insmod nf_nat_rtsp.o ports=port1,port2,...port<MAX_PORTS>
++ *                           stunaddr=<address>
++ *                           destaction=[auto|strip|none]
++ *
++ * If no ports are specified, the default will be port 554 only.
++ *
++ * stunaddr specifies the address used to detect that a client is using STUN.
++ * If this address is seen in the destination parameter, it is assumed that
++ * the client has already punched a UDP hole in the firewall, so we don't
++ * mangle the client_port.  If none is specified, it is autodetected.  It
++ * only needs to be set if you have multiple levels of NAT.  It should be
++ * set to the external address that the STUN clients detect.  Note that in
++ * this case, it will not be possible for clients to use UDP with servers
++ * between the NATs.
++ *
++ * If no destaction is specified, auto is used.
++ *   destaction=auto:  strip destination parameter if it is not stunaddr.
++ *   destaction=strip: always strip destination parameter (not recommended).
++ *   destaction=none:  do not touch destination parameter (not recommended).
++ */
++
++#include <linux/module.h>
++#include <net/tcp.h>
++#include <net/netfilter/nf_nat_helper.h>
++#include <net/netfilter/nf_nat_rule.h>
++#include <linux/netfilter/nf_conntrack_rtsp.h>
++#include <net/netfilter/nf_conntrack_expect.h>
++
++#include <linux/inet.h>
++#include <linux/ctype.h>
++#define NF_NEED_STRNCASECMP
++#define NF_NEED_STRTOU16
++#include <linux/netfilter_helpers.h>
++#define NF_NEED_MIME_NEXTLINE
++#include <linux/netfilter_mime.h>
++
++#define INFOP(fmt, args...) printk(KERN_INFO "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
++#if 0
++#define DEBUGP(fmt, args...) printk(KERN_DEBUG "%s: %s: " fmt, __FILE__, __FUNCTION__ , ## args)
++#else
++#define DEBUGP(fmt, args...)
++#endif
++
++#define MAX_PORTS       8
++#define DSTACT_AUTO     0
++#define DSTACT_STRIP    1
++#define DSTACT_NONE     2
++
++static char*    stunaddr = NULL;
++static char*    destaction = NULL;
++
++static u_int32_t extip = 0;
++static int       dstact = 0;
++
++MODULE_AUTHOR("Tom Marshall <tmarshall at real.com>");
++MODULE_DESCRIPTION("RTSP network address translation module");
++MODULE_LICENSE("GPL");
++module_param(stunaddr, charp, 0644);
++MODULE_PARM_DESC(stunaddr, "Address for detecting STUN");
++module_param(destaction, charp, 0644);
++MODULE_PARM_DESC(destaction, "Action for destination parameter (auto/strip/none)");
++
++#define SKIP_WSPACE(ptr,len,off) while(off < len && isspace(*(ptr+off))) { off++; }
++
++/*** helper functions ***/
++
++static void
++get_skb_tcpdata(struct sk_buff* skb, char** pptcpdata, uint* ptcpdatalen)
++{
++    struct iphdr*   iph  = ip_hdr(skb);
++    struct tcphdr*  tcph = (void *)iph + ip_hdrlen(skb);
++
++    *pptcpdata = (char*)tcph +  tcph->doff*4;
++    *ptcpdatalen = ((char*)skb_transport_header(skb) + skb->len) - *pptcpdata;
++}
++
++/*** nat functions ***/
++
++/*
++ * Mangle the "Transport:" header:
++ *   - Replace all occurences of "client_port=<spec>"
++ *   - Handle destination parameter
++ *
++ * In:
++ *   ct, ctinfo = conntrack context
++ *   skb        = packet
++ *   tranoff    = Transport header offset from TCP data
++ *   tranlen    = Transport header length (incl. CRLF)
++ *   rport_lo   = replacement low  port (host endian)
++ *   rport_hi   = replacement high port (host endian)
++ *
++ * Returns packet size difference.
++ *
++ * Assumes that a complete transport header is present, ending with CR or LF
++ */
++static int
++rtsp_mangle_tran(enum ip_conntrack_info ctinfo,
++                 struct nf_conntrack_expect* exp,
++								 struct ip_ct_rtsp_expect* prtspexp,
++                 struct sk_buff* skb, uint tranoff, uint tranlen)
++{
++    char*       ptcp;
++    uint        tcplen;
++    char*       ptran;
++    char        rbuf1[16];      /* Replacement buffer (one port) */
++    uint        rbuf1len;       /* Replacement len (one port) */
++    char        rbufa[16];      /* Replacement buffer (all ports) */
++    uint        rbufalen;       /* Replacement len (all ports) */
++    u_int32_t   newip;
++    u_int16_t   loport, hiport;
++    uint        off = 0;
++    uint        diff;           /* Number of bytes we removed */
++
++    struct nf_conn *ct = exp->master;
++    struct nf_conntrack_tuple *t;
++
++    char    szextaddr[15+1];
++    uint    extaddrlen;
++    int     is_stun;
++
++    get_skb_tcpdata(skb, &ptcp, &tcplen);
++    ptran = ptcp+tranoff;
++
++    if (tranoff+tranlen > tcplen || tcplen-tranoff < tranlen ||
++        tranlen < 10 || !iseol(ptran[tranlen-1]) ||
++        nf_strncasecmp(ptran, "Transport:", 10) != 0)
++    {
++        INFOP("sanity check failed\n");
++        return 0;
++    }
++    off += 10;
++    SKIP_WSPACE(ptcp+tranoff, tranlen, off);
++
++    newip = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip;
++    t = &exp->tuple;
++    t->dst.u3.ip = newip;
++
++    extaddrlen = extip ? sprintf(szextaddr, "%u.%u.%u.%u", NIPQUAD(extip))
++                       : sprintf(szextaddr, "%u.%u.%u.%u", NIPQUAD(newip));
++    DEBUGP("stunaddr=%s (%s)\n", szextaddr, (extip?"forced":"auto"));
++
++    rbuf1len = rbufalen = 0;
++    switch (prtspexp->pbtype)
++    {
++    case pb_single:
++        for (loport = prtspexp->loport; loport != 0; loport++) /* XXX: improper wrap? */
++        {
++            t->dst.u.udp.port = htons(loport);
++            if (nf_ct_expect_related(exp) == 0)
++            {
++                DEBUGP("using port %hu\n", loport);
++                break;
++            }
++        }
++        if (loport != 0)
++        {
++            rbuf1len = sprintf(rbuf1, "%hu", loport);
++            rbufalen = sprintf(rbufa, "%hu", loport);
++        }
++        break;
++    case pb_range:
++        for (loport = prtspexp->loport; loport != 0; loport += 2) /* XXX: improper wrap? */
++        {
++            t->dst.u.udp.port = htons(loport);
++            if (nf_ct_expect_related(exp) == 0)
++            {
++                hiport = loport + ~exp->mask.src.u.udp.port;
++                DEBUGP("using ports %hu-%hu\n", loport, hiport);
++                break;
++            }
++        }
++        if (loport != 0)
++        {
++            rbuf1len = sprintf(rbuf1, "%hu", loport);
++            rbufalen = sprintf(rbufa, "%hu-%hu", loport, loport+1);
++        }
++        break;
++    case pb_discon:
++        for (loport = prtspexp->loport; loport != 0; loport++) /* XXX: improper wrap? */
++        {
++            t->dst.u.udp.port = htons(loport);
++            if (nf_ct_expect_related(exp) == 0)
++            {
++                DEBUGP("using port %hu (1 of 2)\n", loport);
++                break;
++            }
++        }
++        for (hiport = prtspexp->hiport; hiport != 0; hiport++) /* XXX: improper wrap? */
++        {
++            t->dst.u.udp.port = htons(hiport);
++            if (nf_ct_expect_related(exp) == 0)
++            {
++                DEBUGP("using port %hu (2 of 2)\n", hiport);
++                break;
++            }
++        }
++        if (loport != 0 && hiport != 0)
++        {
++            rbuf1len = sprintf(rbuf1, "%hu", loport);
++            if (hiport == loport+1)
++            {
++                rbufalen = sprintf(rbufa, "%hu-%hu", loport, hiport);
++            }
++            else
++            {
++                rbufalen = sprintf(rbufa, "%hu/%hu", loport, hiport);
++            }
++        }
++        break;
++    }
++
++    if (rbuf1len == 0)
++    {
++        return 0;   /* cannot get replacement port(s) */
++    }
++
++    /* Transport: tran;field;field=val,tran;field;field=val,... */
++    while (off < tranlen)
++    {
++        uint        saveoff;
++        const char* pparamend;
++        uint        nextparamoff;
++
++        pparamend = memchr(ptran+off, ',', tranlen-off);
++        pparamend = (pparamend == NULL) ? ptran+tranlen : pparamend+1;
++        nextparamoff = pparamend-ptcp;
++
++        /*
++         * We pass over each param twice.  On the first pass, we look for a
++         * destination= field.  It is handled by the security policy.  If it
++         * is present, allowed, and equal to our external address, we assume
++         * that STUN is being used and we leave the client_port= field alone.
++         */
++        is_stun = 0;
++        saveoff = off;
++        while (off < nextparamoff)
++        {
++            const char* pfieldend;
++            uint        nextfieldoff;
++
++            pfieldend = memchr(ptran+off, ';', nextparamoff-off);
++            nextfieldoff = (pfieldend == NULL) ? nextparamoff : pfieldend-ptran+1;
++
++            if (dstact != DSTACT_NONE && strncmp(ptran+off, "destination=", 12) == 0)
++            {
++                if (strncmp(ptran+off+12, szextaddr, extaddrlen) == 0)
++                {
++                    is_stun = 1;
++                }
++                if (dstact == DSTACT_STRIP || (dstact == DSTACT_AUTO && !is_stun))
++                {
++                    diff = nextfieldoff-off;
++                    if (!nf_nat_mangle_tcp_packet(skb, ct, ctinfo,
++                                                         off, diff, NULL, 0))
++                    {
++                        /* mangle failed, all we can do is bail */
++			nf_ct_unexpect_related(exp);
++                        return 0;
++                    }
++                    get_skb_tcpdata(skb, &ptcp, &tcplen);
++                    ptran = ptcp+tranoff;
++                    tranlen -= diff;
++                    nextparamoff -= diff;
++                    nextfieldoff -= diff;
++                }
++            }
++
++            off = nextfieldoff;
++        }
++        if (is_stun)
++        {
++            continue;
++        }
++        off = saveoff;
++        while (off < nextparamoff)
++        {
++            const char* pfieldend;
++            uint        nextfieldoff;
++
++            pfieldend = memchr(ptran+off, ';', nextparamoff-off);
++            nextfieldoff = (pfieldend == NULL) ? nextparamoff : pfieldend-ptran+1;
++
++            if (strncmp(ptran+off, "client_port=", 12) == 0)
++            {
++                u_int16_t   port;
++                uint        numlen;
++                uint        origoff;
++                uint        origlen;
++                char*       rbuf    = rbuf1;
++                uint        rbuflen = rbuf1len;
++
++                off += 12;
++                origoff = (ptran-ptcp)+off;
++                origlen = 0;
++                numlen = nf_strtou16(ptran+off, &port);
++                off += numlen;
++                origlen += numlen;
++                if (port != prtspexp->loport)
++                {
++                    DEBUGP("multiple ports found, port %hu ignored\n", port);
++                }
++                else
++                {
++                    if (ptran[off] == '-' || ptran[off] == '/')
++                    {
++                        off++;
++                        origlen++;
++                        numlen = nf_strtou16(ptran+off, &port);
++                        off += numlen;
++                        origlen += numlen;
++                        rbuf = rbufa;
++                        rbuflen = rbufalen;
++                    }
++
++                    /*
++                     * note we cannot just memcpy() if the sizes are the same.
++                     * the mangle function does skb resizing, checks for a
++                     * cloned skb, and updates the checksums.
++                     *
++                     * parameter 4 below is offset from start of tcp data.
++                     */
++                    diff = origlen-rbuflen;
++                    if (!nf_nat_mangle_tcp_packet(skb, ct, ctinfo,
++                                              origoff, origlen, rbuf, rbuflen))
++                    {
++                        /* mangle failed, all we can do is bail */
++			nf_ct_unexpect_related(exp);
++                        return 0;
++                    }
++                    get_skb_tcpdata(skb, &ptcp, &tcplen);
++                    ptran = ptcp+tranoff;
++                    tranlen -= diff;
++                    nextparamoff -= diff;
++                    nextfieldoff -= diff;
++                }
++            }
++
++            off = nextfieldoff;
++        }
++
++        off = nextparamoff;
++    }
++
++    return 1;
++}
++
++static uint
++help_out(struct sk_buff *skb, enum ip_conntrack_info ctinfo,
++	 unsigned int matchoff, unsigned int matchlen, struct ip_ct_rtsp_expect* prtspexp,
++	 struct nf_conntrack_expect* exp)
++{
++    char*   ptcp;
++    uint    tcplen;
++    uint    hdrsoff;
++    uint    hdrslen;
++    uint    lineoff;
++    uint    linelen;
++    uint    off;
++
++    //struct iphdr* iph = (struct iphdr*)skb->nh.iph;
++    //struct tcphdr* tcph = (struct tcphdr*)((void*)iph + iph->ihl*4);
++
++    get_skb_tcpdata(skb, &ptcp, &tcplen);
++    hdrsoff = matchoff;//exp->seq - ntohl(tcph->seq);
++    hdrslen = matchlen;
++    off = hdrsoff;
++    DEBUGP("NAT rtsp help_out\n");
++
++    while (nf_mime_nextline(ptcp, hdrsoff+hdrslen, &off, &lineoff, &linelen))
++    {
++        if (linelen == 0)
++        {
++            break;
++        }
++        if (off > hdrsoff+hdrslen)
++        {
++            INFOP("!! overrun !!");
++            break;
++        }
++        DEBUGP("hdr: len=%u, %.*s", linelen, (int)linelen, ptcp+lineoff);
++
++        if (nf_strncasecmp(ptcp+lineoff, "Transport:", 10) == 0)
++        {
++            uint oldtcplen = tcplen;
++	    DEBUGP("hdr: Transport\n");
++            if (!rtsp_mangle_tran(ctinfo, exp, prtspexp, skb, lineoff, linelen))
++            {
++		DEBUGP("hdr: Transport mangle failed");
++                break;
++            }
++            get_skb_tcpdata(skb, &ptcp, &tcplen);
++            hdrslen -= (oldtcplen-tcplen);
++            off -= (oldtcplen-tcplen);
++            lineoff -= (oldtcplen-tcplen);
++            linelen -= (oldtcplen-tcplen);
++            DEBUGP("rep: len=%u, %.*s", linelen, (int)linelen, ptcp+lineoff);
++        }
++    }
++
++    return NF_ACCEPT;
++}
++
++static unsigned int
++help(struct sk_buff *skb, enum ip_conntrack_info ctinfo,
++     unsigned int matchoff, unsigned int matchlen, struct ip_ct_rtsp_expect* prtspexp,
++     struct nf_conntrack_expect* exp)
++{
++    int dir = CTINFO2DIR(ctinfo);
++    int rc = NF_ACCEPT;
++
++    switch (dir)
++    {
++    case IP_CT_DIR_ORIGINAL:
++        rc = help_out(skb, ctinfo, matchoff, matchlen, prtspexp, exp);
++        break;
++    case IP_CT_DIR_REPLY:
++	DEBUGP("unmangle ! %u\n", ctinfo);
++    	/* XXX: unmangle */
++	rc = NF_ACCEPT;
++        break;
++    }
++    //UNLOCK_BH(&ip_rtsp_lock);
++
++    return rc;
++}
++
++static void expected(struct nf_conn* ct, struct nf_conntrack_expect *exp)
++{
++    struct nf_nat_multi_range_compat mr;
++    u_int32_t newdstip, newsrcip, newip;
++
++    struct nf_conn *master = ct->master;
++
++    newdstip = master->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
++    newsrcip = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
++    //FIXME (how to port that ?)
++    //code from 2.4 : newip = (HOOK2MANIP(hooknum) == IP_NAT_MANIP_SRC) ? newsrcip : newdstip;
++    newip = newdstip;
++
++    DEBUGP("newsrcip=%u.%u.%u.%u, newdstip=%u.%u.%u.%u, newip=%u.%u.%u.%u\n",
++           NIPQUAD(newsrcip), NIPQUAD(newdstip), NIPQUAD(newip));
++
++    mr.rangesize = 1;
++    // We don't want to manip the per-protocol, just the IPs.
++    mr.range[0].flags = IP_NAT_RANGE_MAP_IPS;
++    mr.range[0].min_ip = mr.range[0].max_ip = newip;
++
++    nf_nat_setup_info(ct, &mr.range[0], IP_NAT_MANIP_DST);
++}
++
++
++static void __exit fini(void)
++{
++	nf_nat_rtsp_hook = NULL;
++        nf_nat_rtsp_hook_expectfn = NULL;
++	synchronize_net();
++}
++
++static int __init init(void)
++{
++	printk("nf_nat_rtsp v" IP_NF_RTSP_VERSION " loading\n");
++
++	BUG_ON(nf_nat_rtsp_hook);
++	nf_nat_rtsp_hook = help;
++        nf_nat_rtsp_hook_expectfn = &expected;
++
++	if (stunaddr != NULL)
++		extip = in_aton(stunaddr);
++
++	if (destaction != NULL) {
++	        if (strcmp(destaction, "auto") == 0)
++			dstact = DSTACT_AUTO;
++
++		if (strcmp(destaction, "strip") == 0)
++			dstact = DSTACT_STRIP;
++
++		if (strcmp(destaction, "none") == 0)
++			dstact = DSTACT_NONE;
++	}
++
++	return 0;
++}
++
++module_init(init);
++module_exit(fini);
diff --git a/target/linux/generic/patches-2.6.35/200-sched_esfq.patch b/target/linux/generic/patches-2.6.35/200-sched_esfq.patch
new file mode 100644
index 0000000000..1d513580b3
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/200-sched_esfq.patch
@@ -0,0 +1,795 @@
+--- a/include/linux/pkt_sched.h
++++ b/include/linux/pkt_sched.h
+@@ -173,8 +173,37 @@ struct tc_sfq_xstats {
+  *
+  *	The only reason for this is efficiency, it is possible
+  *	to change these parameters in compile time.
++ *
++ *	If you need to play with these values, use esfq instead.
+  */
+ 
++/* ESFQ section */
++
++enum
++{
++        /* traditional */
++	TCA_SFQ_HASH_CLASSIC,
++	TCA_SFQ_HASH_DST,
++	TCA_SFQ_HASH_SRC,
++	TCA_SFQ_HASH_FWMARK,
++	/* conntrack */
++	TCA_SFQ_HASH_CTORIGDST,
++	TCA_SFQ_HASH_CTORIGSRC,
++	TCA_SFQ_HASH_CTREPLDST,
++	TCA_SFQ_HASH_CTREPLSRC,
++	TCA_SFQ_HASH_CTNATCHG,
++};
++
++struct tc_esfq_qopt
++{
++	unsigned	quantum;	/* Bytes per round allocated to flow */
++	int		perturb_period;	/* Period of hash perturbation */
++	__u32		limit;		/* Maximal packets in queue */
++	unsigned	divisor;	/* Hash divisor  */
++	unsigned	flows;		/* Maximal number of flows  */
++	unsigned	hash_kind;	/* Hash function to use for flow identification */
++};
++
+ /* RED section */
+ 
+ enum {
+--- a/net/sched/Kconfig
++++ b/net/sched/Kconfig
+@@ -137,6 +137,37 @@ config NET_SCH_SFQ
+ 	  To compile this code as a module, choose M here: the
+ 	  module will be called sch_sfq.
+ 
++config NET_SCH_ESFQ
++	tristate "Enhanced Stochastic Fairness Queueing (ESFQ)"
++	---help---
++	  Say Y here if you want to use the Enhanced Stochastic Fairness
++	  Queueing (ESFQ) packet scheduling algorithm for some of your network
++	  devices or as a leaf discipline for a classful qdisc such as HTB or
++	  CBQ (see the top of <file:net/sched/sch_esfq.c> for details and
++	  references to the SFQ algorithm).
++
++	  This is an enchanced SFQ version which allows you to control some
++	  hardcoded values in the SFQ scheduler.
++
++	  ESFQ also adds control of the hash function used to identify packet
++	  flows. The original SFQ discipline hashes by connection; ESFQ add
++	  several other hashing methods, such as by src IP or by dst IP, which
++	  can be more fair to users in some networking situations.
++
++	  To compile this code as a module, choose M here: the
++	  module will be called sch_esfq.
++
++config NET_SCH_ESFQ_NFCT
++	bool "Connection Tracking Hash Types"
++	depends on NET_SCH_ESFQ && NF_CONNTRACK
++	---help---
++	  Say Y here to enable support for hashing based on netfilter connection
++	  tracking information. This is useful for a router that is also using
++	  NAT to connect privately-addressed hosts to the Internet. If you want
++	  to provide fair distribution of upstream bandwidth, ESFQ must use
++	  connection tracking information, since all outgoing packets will share
++	  the same source address.
++
+ config NET_SCH_TEQL
+ 	tristate "True Link Equalizer (TEQL)"
+ 	---help---
+--- a/net/sched/Makefile
++++ b/net/sched/Makefile
+@@ -24,6 +24,7 @@ obj-$(CONFIG_NET_SCH_GRED)	+= sch_gred.o
+ obj-$(CONFIG_NET_SCH_INGRESS)	+= sch_ingress.o 
+ obj-$(CONFIG_NET_SCH_DSMARK)	+= sch_dsmark.o
+ obj-$(CONFIG_NET_SCH_SFQ)	+= sch_sfq.o
++obj-$(CONFIG_NET_SCH_ESFQ)	+= sch_esfq.o
+ obj-$(CONFIG_NET_SCH_TBF)	+= sch_tbf.o
+ obj-$(CONFIG_NET_SCH_TEQL)	+= sch_teql.o
+ obj-$(CONFIG_NET_SCH_PRIO)	+= sch_prio.o
+--- /dev/null
++++ b/net/sched/sch_esfq.c
+@@ -0,0 +1,702 @@
++/*
++ * net/sched/sch_esfq.c	Extended Stochastic Fairness Queueing discipline.
++ *
++ *		This program is free software; you can redistribute it and/or
++ *		modify it under the terms of the GNU General Public License
++ *		as published by the Free Software Foundation; either version
++ *		2 of the License, or (at your option) any later version.
++ *
++ * Authors:	Alexey Kuznetsov, <kuznet@ms2.inr.ac.ru>
++ *
++ * Changes:	Alexander Atanasov, <alex@ssi.bg>
++ *		Added dynamic depth,limit,divisor,hash_kind options.
++ *		Added dst and src hashes.
++ *
++ * 		Alexander Clouter, <alex@digriz.org.uk>
++ *		Ported ESFQ to Linux 2.6.
++ *
++ * 		Corey Hickey, <bugfood-c@fatooh.org>
++ *		Maintenance of the Linux 2.6 port.
++ *		Added fwmark hash (thanks to Robert Kurjata).
++ *		Added usage of jhash.
++ *		Added conntrack support.
++ *		Added ctnatchg hash (thanks to Ben Pfountz).
++ */
++
++#include <linux/module.h>
++#include <asm/uaccess.h>
++#include <asm/system.h>
++#include <linux/bitops.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/jiffies.h>
++#include <linux/string.h>
++#include <linux/mm.h>
++#include <linux/socket.h>
++#include <linux/sockios.h>
++#include <linux/in.h>
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/if_ether.h>
++#include <linux/inet.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/notifier.h>
++#include <linux/init.h>
++#include <net/ip.h>
++#include <net/netlink.h>
++#include <linux/ipv6.h>
++#include <net/route.h>
++#include <linux/skbuff.h>
++#include <net/sock.h>
++#include <net/pkt_sched.h>
++#include <linux/jhash.h>
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++#include <net/netfilter/nf_conntrack.h>
++#endif
++
++/*	Stochastic Fairness Queuing algorithm.
++	For more comments look at sch_sfq.c.
++	The difference is that you can change limit, depth,
++	hash table size and choose alternate hash types.
++
++	classic:	same as in sch_sfq.c
++	dst:		destination IP address
++	src:		source IP address
++	fwmark:		netfilter mark value
++	ctorigdst:	original destination IP address
++	ctorigsrc:	original source IP address
++	ctrepldst:	reply destination IP address
++	ctreplsrc:	reply source IP
++
++*/
++
++#define ESFQ_HEAD 0
++#define ESFQ_TAIL 1
++
++/* This type should contain at least SFQ_DEPTH*2 values */
++typedef unsigned int esfq_index;
++
++struct esfq_head
++{
++	esfq_index	next;
++	esfq_index	prev;
++};
++
++struct esfq_sched_data
++{
++/* Parameters */
++	int		perturb_period;
++	unsigned	quantum;	/* Allotment per round: MUST BE >= MTU */
++	int		limit;
++	unsigned	depth;
++	unsigned	hash_divisor;
++	unsigned	hash_kind;
++/* Variables */
++	struct timer_list perturb_timer;
++	int		perturbation;
++	esfq_index	tail;		/* Index of current slot in round */
++	esfq_index	max_depth;	/* Maximal depth */
++
++	esfq_index	*ht;			/* Hash table */
++	esfq_index	*next;			/* Active slots link */
++	short		*allot;			/* Current allotment per slot */
++	unsigned short	*hash;			/* Hash value indexed by slots */
++	struct sk_buff_head	*qs;		/* Slot queue */
++	struct esfq_head	*dep;		/* Linked list of slots, indexed by depth */
++};
++
++/* This contains the info we will hash. */
++struct esfq_packet_info
++{
++	u32	proto;		/* protocol or port */
++	u32	src;		/* source from packet header */
++	u32	dst;		/* destination from packet header */
++	u32	ctorigsrc;	/* original source from conntrack */
++	u32	ctorigdst;	/* original destination from conntrack */
++	u32	ctreplsrc;	/* reply source from conntrack */
++	u32	ctrepldst;	/* reply destination from conntrack */
++	u32	mark;		/* netfilter mark (fwmark) */
++};
++
++static __inline__ unsigned esfq_jhash_1word(struct esfq_sched_data *q,u32 a)
++{
++	return jhash_1word(a, q->perturbation) & (q->hash_divisor-1);
++}
++
++static __inline__ unsigned esfq_jhash_2words(struct esfq_sched_data *q, u32 a, u32 b)
++{
++	return jhash_2words(a, b, q->perturbation) & (q->hash_divisor-1);
++}
++
++static __inline__ unsigned esfq_jhash_3words(struct esfq_sched_data *q, u32 a, u32 b, u32 c)
++{
++	return jhash_3words(a, b, c, q->perturbation) & (q->hash_divisor-1);
++}
++
++static unsigned esfq_hash(struct esfq_sched_data *q, struct sk_buff *skb)
++{
++	struct esfq_packet_info info;
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++	enum ip_conntrack_info ctinfo;
++	struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
++#endif
++
++	switch (skb->protocol) {
++	case __constant_htons(ETH_P_IP):
++	{
++		struct iphdr *iph = ip_hdr(skb);
++		info.dst = iph->daddr;
++		info.src = iph->saddr;
++		if (!(iph->frag_off&htons(IP_MF|IP_OFFSET)) &&
++		    (iph->protocol == IPPROTO_TCP ||
++		     iph->protocol == IPPROTO_UDP ||
++		     iph->protocol == IPPROTO_SCTP ||
++		     iph->protocol == IPPROTO_DCCP ||
++		     iph->protocol == IPPROTO_ESP))
++			info.proto = *(((u32*)iph) + iph->ihl);
++		else
++			info.proto = iph->protocol;
++		break;
++	}
++	case __constant_htons(ETH_P_IPV6):
++	{
++		struct ipv6hdr *iph = ipv6_hdr(skb);
++		/* Hash ipv6 addresses into a u32. This isn't ideal,
++		 * but the code is simple. */
++		info.dst = jhash2(iph->daddr.s6_addr32, 4, q->perturbation);
++		info.src = jhash2(iph->saddr.s6_addr32, 4, q->perturbation);
++		if (iph->nexthdr == IPPROTO_TCP ||
++		    iph->nexthdr == IPPROTO_UDP ||
++		    iph->nexthdr == IPPROTO_SCTP ||
++		    iph->nexthdr == IPPROTO_DCCP ||
++		    iph->nexthdr == IPPROTO_ESP)
++			info.proto = *(u32*)&iph[1];
++		else
++			info.proto = iph->nexthdr;
++		break;
++	}
++	default:
++		info.dst   = (u32)(unsigned long)skb_dst(skb);
++		info.src   = (u32)(unsigned long)skb->sk;
++		info.proto = skb->protocol;
++	}
++
++	info.mark = skb->mark;
++
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++	/* defaults if there is no conntrack info */
++	info.ctorigsrc = info.src;
++	info.ctorigdst = info.dst;
++	info.ctreplsrc = info.dst;
++	info.ctrepldst = info.src;
++	/* collect conntrack info */
++	if (ct && ct != &nf_conntrack_untracked) {
++		if (skb->protocol == __constant_htons(ETH_P_IP)) {
++			info.ctorigsrc = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
++			info.ctorigdst = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3.ip;
++			info.ctreplsrc = ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3.ip;
++			info.ctrepldst = ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip;
++		}
++		else if (skb->protocol == __constant_htons(ETH_P_IPV6)) {
++			/* Again, hash ipv6 addresses into a single u32. */
++			info.ctorigsrc = jhash2(ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip6, 4, q->perturbation);
++			info.ctorigdst = jhash2(ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3.ip6, 4, q->perturbation);
++			info.ctreplsrc = jhash2(ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3.ip6, 4, q->perturbation);
++			info.ctrepldst = jhash2(ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip6, 4, q->perturbation);
++		}
++
++	}
++#endif
++
++	switch(q->hash_kind) {
++	case TCA_SFQ_HASH_CLASSIC:
++		return esfq_jhash_3words(q, info.dst, info.src, info.proto);
++	case TCA_SFQ_HASH_DST:
++		return esfq_jhash_1word(q, info.dst);
++	case TCA_SFQ_HASH_SRC:
++		return esfq_jhash_1word(q, info.src);
++	case TCA_SFQ_HASH_FWMARK:
++		return esfq_jhash_1word(q, info.mark);
++#ifdef CONFIG_NET_SCH_ESFQ_NFCT
++	case TCA_SFQ_HASH_CTORIGDST:
++		return esfq_jhash_1word(q, info.ctorigdst);
++	case TCA_SFQ_HASH_CTORIGSRC:
++		return esfq_jhash_1word(q, info.ctorigsrc);
++	case TCA_SFQ_HASH_CTREPLDST:
++		return esfq_jhash_1word(q, info.ctrepldst);
++	case TCA_SFQ_HASH_CTREPLSRC:
++		return esfq_jhash_1word(q, info.ctreplsrc);
++	case TCA_SFQ_HASH_CTNATCHG:
++	{
++		if (info.ctorigdst == info.ctreplsrc)
++			return esfq_jhash_1word(q, info.ctorigsrc);
++		return esfq_jhash_1word(q, info.ctreplsrc);
++	}
++#endif
++	default:
++		if (net_ratelimit())
++			printk(KERN_WARNING "ESFQ: Unknown hash method. Falling back to classic.\n");
++	}
++	return esfq_jhash_3words(q, info.dst, info.src, info.proto);
++}
++
++static inline void esfq_link(struct esfq_sched_data *q, esfq_index x)
++{
++	esfq_index p, n;
++	int d = q->qs[x].qlen + q->depth;
++
++	p = d;
++	n = q->dep[d].next;
++	q->dep[x].next = n;
++	q->dep[x].prev = p;
++	q->dep[p].next = q->dep[n].prev = x;
++}
++
++static inline void esfq_dec(struct esfq_sched_data *q, esfq_index x)
++{
++	esfq_index p, n;
++
++	n = q->dep[x].next;
++	p = q->dep[x].prev;
++	q->dep[p].next = n;
++	q->dep[n].prev = p;
++
++	if (n == p && q->max_depth == q->qs[x].qlen + 1)
++		q->max_depth--;
++
++	esfq_link(q, x);
++}
++
++static inline void esfq_inc(struct esfq_sched_data *q, esfq_index x)
++{
++	esfq_index p, n;
++	int d;
++
++	n = q->dep[x].next;
++	p = q->dep[x].prev;
++	q->dep[p].next = n;
++	q->dep[n].prev = p;
++	d = q->qs[x].qlen;
++	if (q->max_depth < d)
++		q->max_depth = d;
++
++	esfq_link(q, x);
++}
++
++static unsigned int esfq_drop(struct Qdisc *sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_index d = q->max_depth;
++	struct sk_buff *skb;
++	unsigned int len;
++
++	/* Queue is full! Find the longest slot and
++	   drop a packet from it */
++
++	if (d > 1) {
++		esfq_index x = q->dep[d+q->depth].next;
++		skb = q->qs[x].prev;
++		len = skb->len;
++		__skb_unlink(skb, &q->qs[x]);
++		kfree_skb(skb);
++		esfq_dec(q, x);
++		sch->q.qlen--;
++		sch->qstats.drops++;
++		sch->qstats.backlog -= len;
++		return len;
++	}
++
++	if (d == 1) {
++		/* It is difficult to believe, but ALL THE SLOTS HAVE LENGTH 1. */
++		d = q->next[q->tail];
++		q->next[q->tail] = q->next[d];
++		q->allot[q->next[d]] += q->quantum;
++		skb = q->qs[d].prev;
++		len = skb->len;
++		__skb_unlink(skb, &q->qs[d]);
++		kfree_skb(skb);
++		esfq_dec(q, d);
++		sch->q.qlen--;
++		q->ht[q->hash[d]] = q->depth;
++		sch->qstats.drops++;
++		sch->qstats.backlog -= len;
++		return len;
++	}
++
++	return 0;
++}
++
++static void esfq_q_enqueue(struct sk_buff *skb, struct esfq_sched_data *q, unsigned int end)
++{
++	unsigned hash = esfq_hash(q, skb);
++	unsigned depth = q->depth;
++	esfq_index x;
++
++	x = q->ht[hash];
++	if (x == depth) {
++		q->ht[hash] = x = q->dep[depth].next;
++		q->hash[x] = hash;
++	}
++
++	if (end == ESFQ_TAIL)
++		__skb_queue_tail(&q->qs[x], skb);
++	else
++		__skb_queue_head(&q->qs[x], skb);
++
++	esfq_inc(q, x);
++	if (q->qs[x].qlen == 1) {		/* The flow is new */
++		if (q->tail == depth) {	/* It is the first flow */
++			q->tail = x;
++			q->next[x] = x;
++			q->allot[x] = q->quantum;
++		} else {
++			q->next[x] = q->next[q->tail];
++			q->next[q->tail] = x;
++			q->tail = x;
++		}
++	}
++}
++
++static int esfq_enqueue(struct sk_buff *skb, struct Qdisc* sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_q_enqueue(skb, q, ESFQ_TAIL);
++	sch->qstats.backlog += skb->len;
++	if (++sch->q.qlen < q->limit-1) {
++		sch->bstats.bytes += skb->len;
++		sch->bstats.packets++;
++		return 0;
++	}
++
++	sch->qstats.drops++;
++	esfq_drop(sch);
++	return NET_XMIT_CN;
++}
++
++static struct sk_buff *esfq_peek(struct Qdisc* sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_index a;
++
++	/* No active slots */
++	if (q->tail == q->depth)
++		return NULL;
++
++	a = q->next[q->tail];
++	return skb_peek(&q->qs[a]);
++}
++
++static struct sk_buff *esfq_q_dequeue(struct esfq_sched_data *q)
++{
++	struct sk_buff *skb;
++	unsigned depth = q->depth;
++	esfq_index a, old_a;
++
++	/* No active slots */
++	if (q->tail == depth)
++		return NULL;
++
++	a = old_a = q->next[q->tail];
++
++	/* Grab packet */
++	skb = __skb_dequeue(&q->qs[a]);
++	esfq_dec(q, a);
++
++	/* Is the slot empty? */
++	if (q->qs[a].qlen == 0) {
++		q->ht[q->hash[a]] = depth;
++		a = q->next[a];
++		if (a == old_a) {
++			q->tail = depth;
++			return skb;
++		}
++		q->next[q->tail] = a;
++		q->allot[a] += q->quantum;
++	} else if ((q->allot[a] -= skb->len) <= 0) {
++		q->tail = a;
++		a = q->next[a];
++		q->allot[a] += q->quantum;
++	}
++
++	return skb;
++}
++
++static struct sk_buff *esfq_dequeue(struct Qdisc* sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	struct sk_buff *skb;
++
++	skb = esfq_q_dequeue(q);
++	if (skb == NULL)
++		return NULL;
++	sch->q.qlen--;
++	sch->qstats.backlog -= skb->len;
++	return skb;
++}
++
++static void esfq_q_destroy(struct esfq_sched_data *q)
++{
++	del_timer(&q->perturb_timer);
++	if(q->ht)
++		kfree(q->ht);
++	if(q->dep)
++		kfree(q->dep);
++	if(q->next)
++		kfree(q->next);
++	if(q->allot)
++		kfree(q->allot);
++	if(q->hash)
++		kfree(q->hash);
++	if(q->qs)
++		kfree(q->qs);
++}
++
++static void esfq_destroy(struct Qdisc *sch)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	esfq_q_destroy(q);
++}
++
++
++static void esfq_reset(struct Qdisc* sch)
++{
++	struct sk_buff *skb;
++
++	while ((skb = esfq_dequeue(sch)) != NULL)
++		kfree_skb(skb);
++}
++
++static void esfq_perturbation(unsigned long arg)
++{
++	struct Qdisc *sch = (struct Qdisc*)arg;
++	struct esfq_sched_data *q = qdisc_priv(sch);
++
++	q->perturbation = net_random()&0x1F;
++
++	if (q->perturb_period) {
++		q->perturb_timer.expires = jiffies + q->perturb_period;
++		add_timer(&q->perturb_timer);
++	}
++}
++
++static unsigned int esfq_check_hash(unsigned int kind)
++{
++	switch (kind) {
++	case TCA_SFQ_HASH_CTORIGDST:
++	case TCA_SFQ_HASH_CTORIGSRC:
++	case TCA_SFQ_HASH_CTREPLDST:
++	case TCA_SFQ_HASH_CTREPLSRC:
++	case TCA_SFQ_HASH_CTNATCHG:
++#ifndef CONFIG_NET_SCH_ESFQ_NFCT
++	{
++		if (net_ratelimit())
++			printk(KERN_WARNING "ESFQ: Conntrack hash types disabled in kernel config. Falling back to classic.\n");
++		return TCA_SFQ_HASH_CLASSIC;
++	}
++#endif
++	case TCA_SFQ_HASH_CLASSIC:
++	case TCA_SFQ_HASH_DST:
++	case TCA_SFQ_HASH_SRC:
++	case TCA_SFQ_HASH_FWMARK:
++		return kind;
++	default:
++	{
++		if (net_ratelimit())
++			printk(KERN_WARNING "ESFQ: Unknown hash type. Falling back to classic.\n");
++		return TCA_SFQ_HASH_CLASSIC;
++	}
++	}
++}
++
++static int esfq_q_init(struct esfq_sched_data *q, struct nlattr *opt)
++{
++	struct tc_esfq_qopt *ctl = nla_data(opt);
++	esfq_index p = ~0U/2;
++	int i;
++
++	if (opt && opt->nla_len < nla_attr_size(sizeof(*ctl)))
++		return -EINVAL;
++
++	q->perturbation = 0;
++	q->hash_kind = TCA_SFQ_HASH_CLASSIC;
++	q->max_depth = 0;
++	if (opt == NULL) {
++		q->perturb_period = 0;
++		q->hash_divisor = 1024;
++		q->tail = q->limit = q->depth = 128;
++
++	} else {
++		struct tc_esfq_qopt *ctl = nla_data(opt);
++		if (ctl->quantum)
++			q->quantum = ctl->quantum;
++		q->perturb_period = ctl->perturb_period*HZ;
++		q->hash_divisor = ctl->divisor ? : 1024;
++		q->tail = q->limit = q->depth = ctl->flows ? : 128;
++
++		if ( q->depth > p - 1 )
++			return -EINVAL;
++
++		if (ctl->limit)
++			q->limit = min_t(u32, ctl->limit, q->depth);
++
++		if (ctl->hash_kind) {
++			q->hash_kind = esfq_check_hash(ctl->hash_kind);
++		}
++	}
++
++	q->ht = kmalloc(q->hash_divisor*sizeof(esfq_index), GFP_KERNEL);
++	if (!q->ht)
++		goto err_case;
++	q->dep = kmalloc((1+q->depth*2)*sizeof(struct esfq_head), GFP_KERNEL);
++	if (!q->dep)
++		goto err_case;
++	q->next = kmalloc(q->depth*sizeof(esfq_index), GFP_KERNEL);
++	if (!q->next)
++		goto err_case;
++	q->allot = kmalloc(q->depth*sizeof(short), GFP_KERNEL);
++	if (!q->allot)
++		goto err_case;
++	q->hash = kmalloc(q->depth*sizeof(unsigned short), GFP_KERNEL);
++	if (!q->hash)
++		goto err_case;
++	q->qs = kmalloc(q->depth*sizeof(struct sk_buff_head), GFP_KERNEL);
++	if (!q->qs)
++		goto err_case;
++
++	for (i=0; i< q->hash_divisor; i++)
++		q->ht[i] = q->depth;
++	for (i=0; i<q->depth; i++) {
++		skb_queue_head_init(&q->qs[i]);
++		q->dep[i+q->depth].next = i+q->depth;
++		q->dep[i+q->depth].prev = i+q->depth;
++	}
++
++	for (i=0; i<q->depth; i++)
++		esfq_link(q, i);
++	return 0;
++err_case:
++	esfq_q_destroy(q);
++	return -ENOBUFS;
++}
++
++static int esfq_init(struct Qdisc *sch, struct nlattr *opt)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	int err;
++
++	q->quantum = psched_mtu(qdisc_dev(sch)); /* default */
++	if ((err = esfq_q_init(q, opt)))
++		return err;
++
++	init_timer(&q->perturb_timer);
++	q->perturb_timer.data = (unsigned long)sch;
++	q->perturb_timer.function = esfq_perturbation;
++	if (q->perturb_period) {
++		q->perturb_timer.expires = jiffies + q->perturb_period;
++		add_timer(&q->perturb_timer);
++	}
++
++	return 0;
++}
++
++static int esfq_change(struct Qdisc *sch, struct nlattr *opt)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	struct esfq_sched_data new;
++	struct sk_buff *skb;
++	int err;
++
++	/* set up new queue */
++	memset(&new, 0, sizeof(struct esfq_sched_data));
++	new.quantum = psched_mtu(qdisc_dev(sch)); /* default */
++	if ((err = esfq_q_init(&new, opt)))
++		return err;
++
++	/* copy all packets from the old queue to the new queue */
++	sch_tree_lock(sch);
++	while ((skb = esfq_q_dequeue(q)) != NULL)
++		esfq_q_enqueue(skb, &new, ESFQ_TAIL);
++
++	/* clean up the old queue */
++	esfq_q_destroy(q);
++
++	/* copy elements of the new queue into the old queue */
++	q->perturb_period = new.perturb_period;
++	q->quantum        = new.quantum;
++	q->limit          = new.limit;
++	q->depth          = new.depth;
++	q->hash_divisor   = new.hash_divisor;
++	q->hash_kind      = new.hash_kind;
++	q->tail           = new.tail;
++	q->max_depth      = new.max_depth;
++	q->ht    = new.ht;
++	q->dep   = new.dep;
++	q->next  = new.next;
++	q->allot = new.allot;
++	q->hash  = new.hash;
++	q->qs    = new.qs;
++
++	/* finish up */
++	if (q->perturb_period) {
++		q->perturb_timer.expires = jiffies + q->perturb_period;
++		add_timer(&q->perturb_timer);
++	} else {
++		q->perturbation = 0;
++	}
++	sch_tree_unlock(sch);
++	return 0;
++}
++
++static int esfq_dump(struct Qdisc *sch, struct sk_buff *skb)
++{
++	struct esfq_sched_data *q = qdisc_priv(sch);
++	unsigned char *b = skb_tail_pointer(skb);
++	struct tc_esfq_qopt opt;
++
++	opt.quantum = q->quantum;
++	opt.perturb_period = q->perturb_period/HZ;
++
++	opt.limit = q->limit;
++	opt.divisor = q->hash_divisor;
++	opt.flows = q->depth;
++	opt.hash_kind = q->hash_kind;
++
++	NLA_PUT(skb, TCA_OPTIONS, sizeof(opt), &opt);
++
++	return skb->len;
++
++nla_put_failure:
++	nlmsg_trim(skb, b);
++	return -1;
++}
++
++static struct Qdisc_ops esfq_qdisc_ops =
++{
++	.next		=	NULL,
++	.cl_ops		=	NULL,
++	.id		=	"esfq",
++	.priv_size	=	sizeof(struct esfq_sched_data),
++	.enqueue	=	esfq_enqueue,
++	.dequeue	=	esfq_dequeue,
++	.peek		=	esfq_peek,
++	.drop		=	esfq_drop,
++	.init		=	esfq_init,
++	.reset		=	esfq_reset,
++	.destroy	=	esfq_destroy,
++	.change		=	esfq_change,
++	.dump		=	esfq_dump,
++	.owner		=	THIS_MODULE,
++};
++
++static int __init esfq_module_init(void)
++{
++	return register_qdisc(&esfq_qdisc_ops);
++}
++static void __exit esfq_module_exit(void)
++{
++	unregister_qdisc(&esfq_qdisc_ops);
++}
++module_init(esfq_module_init)
++module_exit(esfq_module_exit)
++MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/patches-2.6.35/201-jhash3.patch b/target/linux/generic/patches-2.6.35/201-jhash3.patch
new file mode 100644
index 0000000000..0218fa19c5
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/201-jhash3.patch
@@ -0,0 +1,227 @@
+--- a/include/linux/jhash.h
++++ b/include/linux/jhash.h
+@@ -3,80 +3,95 @@
+ 
+ /* jhash.h: Jenkins hash support.
+  *
+- * Copyright (C) 1996 Bob Jenkins (bob_jenkins@burtleburtle.net)
++ * Copyright (C) 2006. Bob Jenkins (bob_jenkins@burtleburtle.net)
+  *
+  * http://burtleburtle.net/bob/hash/
+  *
+  * These are the credits from Bob's sources:
+  *
+- * lookup2.c, by Bob Jenkins, December 1996, Public Domain.
+- * hash(), hash2(), hash3, and mix() are externally useful functions.
+- * Routines to test the hash are included if SELF_TEST is defined.
+- * You can use this free for any purpose.  It has no warranty.
++ * lookup3.c, by Bob Jenkins, May 2006, Public Domain.
+  *
+- * Copyright (C) 2003 David S. Miller (davem@redhat.com)
++ * These are functions for producing 32-bit hashes for hash table lookup.
++ * hashword(), hashlittle(), hashlittle2(), hashbig(), mix(), and final() 
++ * are externally useful functions.  Routines to test the hash are included 
++ * if SELF_TEST is defined.  You can use this free for any purpose.  It's in
++ * the public domain.  It has no warranty.
++ *
++ * Copyright (C) 2009 Jozsef Kadlecsik (kadlec@blackhole.kfki.hu)
+  *
+  * I've modified Bob's hash to be useful in the Linux kernel, and
+- * any bugs present are surely my fault.  -DaveM
++ * any bugs present are my fault.  Jozsef
+  */
+ 
+-/* NOTE: Arguments are modified. */
+-#define __jhash_mix(a, b, c) \
++#define __rot(x,k) (((x)<<(k)) | ((x)>>(32-(k))))
++
++/* __jhash_mix - mix 3 32-bit values reversibly. */
++#define __jhash_mix(a,b,c) \
++{ \
++  a -= c;  a ^= __rot(c, 4);  c += b; \
++  b -= a;  b ^= __rot(a, 6);  a += c; \
++  c -= b;  c ^= __rot(b, 8);  b += a; \
++  a -= c;  a ^= __rot(c,16);  c += b; \
++  b -= a;  b ^= __rot(a,19);  a += c; \
++  c -= b;  c ^= __rot(b, 4);  b += a; \
++}
++
++/* __jhash_final - final mixing of 3 32-bit values (a,b,c) into c */
++#define __jhash_final(a,b,c) \
+ { \
+-  a -= b; a -= c; a ^= (c>>13); \
+-  b -= c; b -= a; b ^= (a<<8); \
+-  c -= a; c -= b; c ^= (b>>13); \
+-  a -= b; a -= c; a ^= (c>>12);  \
+-  b -= c; b -= a; b ^= (a<<16); \
+-  c -= a; c -= b; c ^= (b>>5); \
+-  a -= b; a -= c; a ^= (c>>3);  \
+-  b -= c; b -= a; b ^= (a<<10); \
+-  c -= a; c -= b; c ^= (b>>15); \
++  c ^= b; c -= __rot(b,14); \
++  a ^= c; a -= __rot(c,11); \
++  b ^= a; b -= __rot(a,25); \
++  c ^= b; c -= __rot(b,16); \
++  a ^= c; a -= __rot(c,4);  \
++  b ^= a; b -= __rot(a,14); \
++  c ^= b; c -= __rot(b,24); \
+ }
+ 
+-/* The golden ration: an arbitrary value */
+-#define JHASH_GOLDEN_RATIO	0x9e3779b9
++/* An arbitrary initial parameter */
++#define JHASH_GOLDEN_RATIO	0xdeadbeef
+ 
+ /* The most generic version, hashes an arbitrary sequence
+  * of bytes.  No alignment or length assumptions are made about
+- * the input key.
++ * the input key. The result depends on endianness.
+  */
+ static inline u32 jhash(const void *key, u32 length, u32 initval)
+ {
+-	u32 a, b, c, len;
++	u32 a,b,c;
+ 	const u8 *k = key;
+ 
+-	len = length;
+-	a = b = JHASH_GOLDEN_RATIO;
+-	c = initval;
+-
+-	while (len >= 12) {
+-		a += (k[0] +((u32)k[1]<<8) +((u32)k[2]<<16) +((u32)k[3]<<24));
+-		b += (k[4] +((u32)k[5]<<8) +((u32)k[6]<<16) +((u32)k[7]<<24));
+-		c += (k[8] +((u32)k[9]<<8) +((u32)k[10]<<16)+((u32)k[11]<<24));
+-
+-		__jhash_mix(a,b,c);
++	/* Set up the internal state */
++	a = b = c = JHASH_GOLDEN_RATIO + length + initval;
+ 
++	/* all but the last block: affect some 32 bits of (a,b,c) */
++	while (length > 12) {
++    		a += (k[0] + ((u32)k[1]<<8) + ((u32)k[2]<<16) + ((u32)k[3]<<24));
++		b += (k[4] + ((u32)k[5]<<8) + ((u32)k[6]<<16) + ((u32)k[7]<<24));
++		c += (k[8] + ((u32)k[9]<<8) + ((u32)k[10]<<16) + ((u32)k[11]<<24));
++		__jhash_mix(a, b, c);
++		length -= 12;
+ 		k += 12;
+-		len -= 12;
+ 	}
+ 
+-	c += length;
+-	switch (len) {
+-	case 11: c += ((u32)k[10]<<24);
+-	case 10: c += ((u32)k[9]<<16);
+-	case 9 : c += ((u32)k[8]<<8);
+-	case 8 : b += ((u32)k[7]<<24);
+-	case 7 : b += ((u32)k[6]<<16);
+-	case 6 : b += ((u32)k[5]<<8);
++	/* last block: affect all 32 bits of (c) */
++	/* all the case statements fall through */
++	switch (length) {
++	case 12: c += (u32)k[11]<<24;
++	case 11: c += (u32)k[10]<<16;
++	case 10: c += (u32)k[9]<<8;
++	case 9 : c += k[8];
++	case 8 : b += (u32)k[7]<<24;
++	case 7 : b += (u32)k[6]<<16;
++	case 6 : b += (u32)k[5]<<8;
+ 	case 5 : b += k[4];
+-	case 4 : a += ((u32)k[3]<<24);
+-	case 3 : a += ((u32)k[2]<<16);
+-	case 2 : a += ((u32)k[1]<<8);
++	case 4 : a += (u32)k[3]<<24;
++	case 3 : a += (u32)k[2]<<16;
++	case 2 : a += (u32)k[1]<<8;
+ 	case 1 : a += k[0];
+-	};
+-
+-	__jhash_mix(a,b,c);
++		__jhash_final(a, b, c);
++	case 0 :
++		break;
++	}
+ 
+ 	return c;
+ }
+@@ -86,58 +101,57 @@ static inline u32 jhash(const void *key,
+  */
+ static inline u32 jhash2(const u32 *k, u32 length, u32 initval)
+ {
+-	u32 a, b, c, len;
++	u32 a, b, c;
+ 
+-	a = b = JHASH_GOLDEN_RATIO;
+-	c = initval;
+-	len = length;
++	/* Set up the internal state */
++	a = b = c = JHASH_GOLDEN_RATIO + (length<<2) + initval;
+ 
+-	while (len >= 3) {
++	/* handle most of the key */
++	while (length > 3) {
+ 		a += k[0];
+ 		b += k[1];
+ 		c += k[2];
+ 		__jhash_mix(a, b, c);
+-		k += 3; len -= 3;
++		length -= 3;
++		k += 3;
+ 	}
+ 
+-	c += length * 4;
+-
+-	switch (len) {
+-	case 2 : b += k[1];
+-	case 1 : a += k[0];
+-	};
+-
+-	__jhash_mix(a,b,c);
++	/* handle the last 3 u32's */
++	/* all the case statements fall through */ 
++	switch (length) {
++	case 3: c += k[2];
++	case 2: b += k[1];
++	case 1: a += k[0];
++		__jhash_final(a, b, c);
++	case 0:     /* case 0: nothing left to add */
++		break;
++	}
+ 
+ 	return c;
+ }
+ 
+-
+ /* A special ultra-optimized versions that knows they are hashing exactly
+  * 3, 2 or 1 word(s).
+- *
+- * NOTE: In partilar the "c += length; __jhash_mix(a,b,c);" normally
+- *       done at the end is not done here.
+  */
+ static inline u32 jhash_3words(u32 a, u32 b, u32 c, u32 initval)
+ {
+-	a += JHASH_GOLDEN_RATIO;
+-	b += JHASH_GOLDEN_RATIO;
+-	c += initval;
++	a += JHASH_GOLDEN_RATIO + initval;
++	b += JHASH_GOLDEN_RATIO + initval;
++	c += JHASH_GOLDEN_RATIO + initval;
+ 
+-	__jhash_mix(a, b, c);
++	__jhash_final(a, b, c);
+ 
+ 	return c;
+ }
+ 
+ static inline u32 jhash_2words(u32 a, u32 b, u32 initval)
+ {
+-	return jhash_3words(a, b, 0, initval);
++	return jhash_3words(0, a, b, initval);
+ }
+ 
+ static inline u32 jhash_1word(u32 a, u32 initval)
+ {
+-	return jhash_3words(a, 0, 0, initval);
++	return jhash_3words(0, 0, a, initval);
+ }
+ 
+ #endif /* _LINUX_JHASH_H */
diff --git a/target/linux/generic/patches-2.6.35/202-mips_mem_functions_performance.patch b/target/linux/generic/patches-2.6.35/202-mips_mem_functions_performance.patch
new file mode 100644
index 0000000000..e4324717b4
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/202-mips_mem_functions_performance.patch
@@ -0,0 +1,83 @@
+--- a/arch/mips/include/asm/string.h
++++ b/arch/mips/include/asm/string.h
+@@ -133,11 +133,44 @@ strncmp(__const__ char *__cs, __const__
+ 
+ #define __HAVE_ARCH_MEMSET
+ extern void *memset(void *__s, int __c, size_t __count);
++#define memset(__s, __c, len)					\
++({								\
++	size_t __len = (len);					\
++	void *__ret;						\
++	if (__builtin_constant_p(len) && __len >= 64)		\
++		__ret = memset((__s), (__c), __len);		\
++	else							\
++		__ret = __builtin_memset((__s), (__c), __len);	\
++	__ret;							\
++})
+ 
+ #define __HAVE_ARCH_MEMCPY
+ extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
++#define memcpy(dst, src, len)					\
++({								\
++	size_t __len = (len);					\
++	void *__ret;						\
++	if (__builtin_constant_p(len) && __len >= 64)		\
++		__ret = memcpy((dst), (src), __len);		\
++	else							\
++		__ret = __builtin_memcpy((dst), (src), __len);	\
++	__ret;							\
++})
+ 
+ #define __HAVE_ARCH_MEMMOVE
+ extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
++#define memmove(dst, src, len)					\
++({								\
++	size_t __len = (len);					\
++	void *__ret;						\
++	if (__builtin_constant_p(len) && __len >= 64)		\
++		__ret = memmove((dst), (src), __len);		\
++	else							\
++		__ret = __builtin_memmove((dst), (src), __len);	\
++	__ret;							\
++})
++
++#define __HAVE_ARCH_MEMCMP
++#define memcmp(src1, src2, len) __builtin_memcmp((src1), (src2), (len))
+ 
+ #endif /* _ASM_STRING_H */
+--- a/arch/mips/lib/Makefile
++++ b/arch/mips/lib/Makefile
+@@ -3,7 +3,7 @@
+ #
+ 
+ lib-y	+= csum_partial.o delay.o memcpy.o memcpy-inatomic.o memset.o \
+-	   strlen_user.o strncpy_user.o strnlen_user.o uncached.o
++	   strlen_user.o strncpy_user.o strnlen_user.o uncached.o memcmp.o
+ 
+ obj-y			+= iomap.o
+ obj-$(CONFIG_PCI)	+= iomap-pci.o
+--- /dev/null
++++ b/arch/mips/lib/memcmp.c
+@@ -0,0 +1,22 @@
++/*
++ *  copied from linux/lib/string.c
++ *
++ *  Copyright (C) 1991, 1992  Linus Torvalds
++ */
++
++#include <linux/module.h>
++#include <linux/string.h>
++
++#undef memcmp
++int memcmp(const void *cs, const void *ct, size_t count)
++{
++	const unsigned char *su1, *su2;
++	int res = 0;
++
++	for (su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--)
++		if ((res = *su1 - *su2) != 0)
++			break;
++	return res;
++}
++EXPORT_SYMBOL(memcmp);
++
diff --git a/target/linux/generic/patches-2.6.35/203-slab_maxsize.patch b/target/linux/generic/patches-2.6.35/203-slab_maxsize.patch
new file mode 100644
index 0000000000..fe8cecfc77
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/203-slab_maxsize.patch
@@ -0,0 +1,13 @@
+--- a/include/linux/slab.h
++++ b/include/linux/slab.h
+@@ -130,8 +130,8 @@ int kmem_ptr_validate(struct kmem_cache
+  * to do various tricks to work around compiler limitations in order to
+  * ensure proper constant folding.
+  */
+-#define KMALLOC_SHIFT_HIGH	((MAX_ORDER + PAGE_SHIFT - 1) <= 25 ? \
+-				(MAX_ORDER + PAGE_SHIFT - 1) : 25)
++#define KMALLOC_SHIFT_HIGH	((MAX_ORDER + PAGE_SHIFT - 1) <= 17 ? \
++				(MAX_ORDER + PAGE_SHIFT - 1) : 17)
+ 
+ #define KMALLOC_MAX_SIZE	(1UL << KMALLOC_SHIFT_HIGH)
+ #define KMALLOC_MAX_ORDER	(KMALLOC_SHIFT_HIGH - PAGE_SHIFT)
diff --git a/target/linux/generic/patches-2.6.35/204-jffs2_eofdetect.patch b/target/linux/generic/patches-2.6.35/204-jffs2_eofdetect.patch
new file mode 100644
index 0000000000..16d3e1f8e8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/204-jffs2_eofdetect.patch
@@ -0,0 +1,132 @@
+--- a/fs/jffs2/build.c
++++ b/fs/jffs2/build.c
+@@ -111,6 +111,17 @@ static int jffs2_build_filesystem(struct
+ 	dbg_fsbuild("scanned flash completely\n");
+ 	jffs2_dbg_dump_block_lists_nolock(c);
+ 
++	if (c->flags & (1 << 7)) {
++		printk("%s(): unlocking the mtd device... ", __func__);
++		if (c->mtd->unlock)
++			c->mtd->unlock(c->mtd, 0, c->mtd->size);
++		printk("done.\n");
++
++		printk("%s(): erasing all blocks after the end marker... ", __func__);
++		jffs2_erase_pending_blocks(c, -1);
++		printk("done.\n");
++	}
++
+ 	dbg_fsbuild("pass 1 starting\n");
+ 	c->flags |= JFFS2_SB_FLAG_BUILDING;
+ 	/* Now scan the directory tree, increasing nlink according to every dirent found. */
+--- a/fs/jffs2/scan.c
++++ b/fs/jffs2/scan.c
+@@ -72,7 +72,7 @@ static int file_dirty(struct jffs2_sb_in
+ 		return ret;
+ 	if ((ret = jffs2_scan_dirty_space(c, jeb, jeb->free_size)))
+ 		return ret;
+-	/* Turned wasted size into dirty, since we apparently 
++	/* Turned wasted size into dirty, since we apparently
+ 	   think it's recoverable now. */
+ 	jeb->dirty_size += jeb->wasted_size;
+ 	c->dirty_size += jeb->wasted_size;
+@@ -144,8 +144,11 @@ int jffs2_scan_medium(struct jffs2_sb_in
+ 		/* reset summary info for next eraseblock scan */
+ 		jffs2_sum_reset_collected(s);
+ 
+-		ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
+-						buf_size, s);
++		if (c->flags & (1 << 7))
++			ret = BLK_STATE_ALLFF;
++		else
++			ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
++							buf_size, s);
+ 
+ 		if (ret < 0)
+ 			goto out;
+@@ -400,7 +403,7 @@ static int jffs2_scan_xref_node(struct j
+ 	if (!ref)
+ 		return -ENOMEM;
+ 
+-	/* BEFORE jffs2_build_xattr_subsystem() called, 
++	/* BEFORE jffs2_build_xattr_subsystem() called,
+ 	 * and AFTER xattr_ref is marked as a dead xref,
+ 	 * ref->xid is used to store 32bit xid, xd is not used
+ 	 * ref->ino is used to store 32bit inode-number, ic is not used
+@@ -473,7 +476,7 @@ static int jffs2_scan_eraseblock (struct
+ 		struct jffs2_sum_marker *sm;
+ 		void *sumptr = NULL;
+ 		uint32_t sumlen;
+-	      
++
+ 		if (!buf_size) {
+ 			/* XIP case. Just look, point at the summary if it's there */
+ 			sm = (void *)buf + c->sector_size - sizeof(*sm);
+@@ -489,9 +492,9 @@ static int jffs2_scan_eraseblock (struct
+ 				buf_len = sizeof(*sm);
+ 
+ 			/* Read as much as we want into the _end_ of the preallocated buffer */
+-			err = jffs2_fill_scan_buf(c, buf + buf_size - buf_len, 
++			err = jffs2_fill_scan_buf(c, buf + buf_size - buf_len,
+ 						  jeb->offset + c->sector_size - buf_len,
+-						  buf_len);				
++						  buf_len);
+ 			if (err)
+ 				return err;
+ 
+@@ -510,9 +513,9 @@ static int jffs2_scan_eraseblock (struct
+ 				}
+ 				if (buf_len < sumlen) {
+ 					/* Need to read more so that the entire summary node is present */
+-					err = jffs2_fill_scan_buf(c, sumptr, 
++					err = jffs2_fill_scan_buf(c, sumptr,
+ 								  jeb->offset + c->sector_size - sumlen,
+-								  sumlen - buf_len);				
++								  sumlen - buf_len);
+ 					if (err)
+ 						return err;
+ 				}
+@@ -525,7 +528,7 @@ static int jffs2_scan_eraseblock (struct
+ 
+ 			if (buf_size && sumlen > buf_size)
+ 				kfree(sumptr);
+-			/* If it returns with a real error, bail. 
++			/* If it returns with a real error, bail.
+ 			   If it returns positive, that's a block classification
+ 			   (i.e. BLK_STATE_xxx) so return that too.
+ 			   If it returns zero, fall through to full scan. */
+@@ -546,6 +549,17 @@ static int jffs2_scan_eraseblock (struct
+ 			return err;
+ 	}
+ 
++	if ((buf[0] == 0xde) &&
++		(buf[1] == 0xad) &&
++		(buf[2] == 0xc0) &&
++		(buf[3] == 0xde)) {
++		/* end of filesystem. erase everything after this point */
++		printk("%s(): End of filesystem marker found at 0x%x\n", __func__, jeb->offset);
++		c->flags |= (1 << 7);
++
++		return BLK_STATE_ALLFF;
++	}
++
+ 	/* We temporarily use 'ofs' as a pointer into the buffer/jeb */
+ 	ofs = 0;
+ 
+@@ -671,7 +685,7 @@ scan_more:
+ 				scan_end = buf_len;
+ 				goto more_empty;
+ 			}
+-			
++
+ 			/* See how much more there is to read in this eraseblock... */
+ 			buf_len = min_t(uint32_t, buf_size, jeb->offset + c->sector_size - ofs);
+ 			if (!buf_len) {
+@@ -907,7 +921,7 @@ scan_more:
+ 
+ 	D1(printk(KERN_DEBUG "Block at 0x%08x: free 0x%08x, dirty 0x%08x, unchecked 0x%08x, used 0x%08x, wasted 0x%08x\n",
+ 		  jeb->offset,jeb->free_size, jeb->dirty_size, jeb->unchecked_size, jeb->used_size, jeb->wasted_size));
+-	
++
+ 	/* mark_node_obsolete can add to wasted !! */
+ 	if (jeb->wasted_size) {
+ 		jeb->dirty_size += jeb->wasted_size;
diff --git a/target/linux/generic/patches-2.6.35/207-powerpc_asm_segment_h.patch b/target/linux/generic/patches-2.6.35/207-powerpc_asm_segment_h.patch
new file mode 100644
index 0000000000..1272e82c75
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/207-powerpc_asm_segment_h.patch
@@ -0,0 +1,9 @@
+--- /dev/null
++++ b/include/asm-powerpc/segment.h
+@@ -0,0 +1,6 @@
++#ifndef _ASM_SEGMENT_H
++#define _ASM_SEGMENT_H
++
++/* Only here because we have some old header files that expect it.. */
++
++#endif /* _ASM_SEGMENT_H */
diff --git a/target/linux/generic/patches-2.6.35/208-mips_oprofile_fix.patch b/target/linux/generic/patches-2.6.35/208-mips_oprofile_fix.patch
new file mode 100644
index 0000000000..0cbf4ed32b
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/208-mips_oprofile_fix.patch
@@ -0,0 +1,48 @@
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -49,7 +49,9 @@ ifneq ($(SUBARCH),$(ARCH))
+ endif
+ 
+ ifndef CONFIG_FUNCTION_TRACER
+-cflags-y := -ffunction-sections
++  ifndef CONFIG_PROFILING
++    cflags-y := -ffunction-sections
++  endif
+ endif
+ ifdef CONFIG_FUNCTION_GRAPH_TRACER
+   ifndef KBUILD_MCOUNT_RA_ADDRESS
+--- a/arch/mips/oprofile/op_model_mipsxx.c
++++ b/arch/mips/oprofile/op_model_mipsxx.c
+@@ -298,6 +298,11 @@ static void reset_counters(void *arg)
+ 	}
+ }
+ 
++static irqreturn_t mipsxx_perfcount_int(int irq, void *dev_id)
++{
++	return mipsxx_perfcount_handler();
++}
++
+ static int __init mipsxx_init(void)
+ {
+ 	int counters;
+@@ -374,6 +379,10 @@ static int __init mipsxx_init(void)
+ 	save_perf_irq = perf_irq;
+ 	perf_irq = mipsxx_perfcount_handler;
+ 
++	if (cp0_perfcount_irq >= 0)
++		return request_irq(cp0_perfcount_irq, mipsxx_perfcount_int,
++			IRQF_SHARED, "Perfcounter", save_perf_irq);
++
+ 	return 0;
+ }
+ 
+@@ -381,6 +390,9 @@ static void mipsxx_exit(void)
+ {
+ 	int counters = op_model_mipsxx_ops.num_counters;
+ 
++	if (cp0_perfcount_irq >= 0)
++		free_irq(cp0_perfcount_irq, save_perf_irq);
++
+ 	counters = counters_per_cpu_to_total(counters);
+ 	on_each_cpu(reset_counters, (void *)(long)counters, 1);
+ 
diff --git a/target/linux/generic/patches-2.6.35/209-mini_fo.patch b/target/linux/generic/patches-2.6.35/209-mini_fo.patch
new file mode 100644
index 0000000000..d7e3220d24
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/209-mini_fo.patch
@@ -0,0 +1,7782 @@
+--- a/fs/Kconfig
++++ b/fs/Kconfig
+@@ -181,6 +181,7 @@ source "fs/logfs/Kconfig"
+ source "fs/cramfs/Kconfig"
+ source "fs/squashfs/Kconfig"
+ source "fs/freevxfs/Kconfig"
++source "fs/mini_fo/Kconfig"
+ source "fs/minix/Kconfig"
+ source "fs/omfs/Kconfig"
+ source "fs/hpfs/Kconfig"
+--- a/fs/Makefile
++++ b/fs/Makefile
+@@ -77,6 +77,7 @@ obj-$(CONFIG_SQUASHFS)		+= squashfs/
+ obj-y				+= ramfs/
+ obj-$(CONFIG_HUGETLBFS)		+= hugetlbfs/
+ obj-$(CONFIG_CODA_FS)		+= coda/
++obj-$(CONFIG_MINI_FO)		+= mini_fo/
+ obj-$(CONFIG_MINIX_FS)		+= minix/
+ obj-$(CONFIG_FAT_FS)		+= fat/
+ obj-$(CONFIG_BFS_FS)		+= bfs/
+--- /dev/null
++++ b/fs/mini_fo/aux.c
+@@ -0,0 +1,577 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++
++/* check if file exists in storage  */
++int exists_in_storage(dentry_t *dentry)
++{
++	check_mini_fo_dentry(dentry);
++	if(dtost(dentry) == MODIFIED || dtost(dentry) == CREATED || dtost(dentry) == DEL_REWRITTEN)
++		return 1;
++	return 0;
++}
++
++/* check if dentry is in an existing state */
++int is_mini_fo_existant(dentry_t *dentry)
++{
++	check_mini_fo_dentry(dentry);
++
++	if(dtost(dentry) == DELETED || dtost(dentry) == NON_EXISTANT)
++		return 0;
++	else
++		return 1;
++}
++
++/*
++ * This function will create a negative storage dentry for
++ * dentry, what is required for many create like options.
++ * It will create the storage structure if necessary.
++ */
++int get_neg_sto_dentry(dentry_t *dentry)
++{
++	int err = 0;
++	unsigned int len;
++	const unsigned char *name;
++
++	if(!dentry ||
++	   !dtopd(dentry) ||
++	   !(dtost(dentry) == UNMODIFIED ||
++	     dtost(dentry) == NON_EXISTANT ||
++	     dtost(dentry) == DELETED)) {
++		printk(KERN_CRIT "mini_fo: get_neg_sto_dentry: invalid dentry passed.\n");
++		err = -1;
++		goto out;
++	}
++	/* Have we got a neg. dentry already? */
++	if(dtohd2(dentry)) {
++		err = 0;
++		goto out;
++	}
++	if(dtost(dentry->d_parent) == UNMODIFIED) {
++		/* build sto struct */
++		err = build_sto_structure(dentry->d_parent->d_parent, dentry->d_parent);
++		if(err ||
++		   dtost(dentry->d_parent) != MODIFIED) {
++			printk(KERN_CRIT "mini_fo: get_neg_sto_dentry: ERROR building sto structure.\n");
++			err = -1;
++			goto out;
++		}
++	}
++
++	len = dentry->d_name.len;
++	name = dentry->d_name.name;
++
++	dtohd2(dentry) =
++		lookup_one_len(name, dtohd2(dentry->d_parent), len);
++
++ out:
++	return err;
++}
++
++int check_mini_fo_dentry(dentry_t *dentry)
++{
++ 	ASSERT(dentry != NULL);
++	ASSERT(dtopd(dentry) != NULL);
++	ASSERT((dtohd(dentry) != NULL) || (dtohd2(dentry) != NULL));
++
++/* 	if(dtost(dentry) == MODIFIED) { */
++/* 		ASSERT(dentry->d_inode != NULL); */
++/* 		ASSERT(dtohd(dentry) != NULL); */
++/* 		ASSERT(dtohd(dentry)->d_inode != NULL); */
++/* 		ASSERT(dtohd2(dentry) != NULL); */
++/* 		ASSERT(dtohd2(dentry)->d_inode != NULL); */
++/* 	} */
++/* 	else if(dtost(dentry) == UNMODIFIED) { */
++/* 		ASSERT(dentry->d_inode != NULL); */
++/* 		ASSERT( */
++/* 	} */
++	return 0;
++}
++
++int check_mini_fo_file(file_t *file)
++{
++	ASSERT(file != NULL);
++	ASSERT(ftopd(file) != NULL);
++	ASSERT(file->f_dentry != NULL);
++
++	/* violent checking, check depending of state and type
++	 *	if(S_ISDIR(file->f_dentry->d_inode->i_mode)) {}
++	 */
++	ASSERT((ftohf(file) != NULL) || (ftohf2(file) != NULL));
++	return 0;
++}
++
++int check_mini_fo_inode(inode_t *inode)
++{
++	ASSERT(inode != NULL);
++	ASSERT(itopd(inode) != NULL);
++	ASSERT((itohi(inode) != NULL) || (itohi2(inode) != NULL));
++	return 0;
++}
++
++/*
++ * will walk a base path as provided by get_mini_fo_bpath and return
++ * the (hopefully ;-) ) positive dentry of the renamed base dir.
++ *
++ * This does some work of path_init.
++ */
++dentry_t *bpath_walk(super_block_t *sb, char *bpath)
++{
++	int err;
++        struct vfsmount *mnt;
++	struct nameidata nd;
++
++	/* be paranoid */
++	if(!bpath || bpath[0] != '/') {
++		printk(KERN_CRIT "mini_fo: bpath_walk: Invalid string.\n");
++		return NULL;
++	}
++	if(!sb || !stopd(sb)) {
++		printk(KERN_CRIT "mini_fo: bpath_walk: Invalid sb.\n");
++		return NULL;
++	}
++
++	/* fix this: how do I reach this lock?
++	 * read_lock(&current->fs->lock); */
++	mnt = mntget(stopd(sb)->hidden_mnt);
++	/* read_unlock(&current->fs->lock); */
++
++	err = vfs_path_lookup(mnt->mnt_root, mnt, bpath+1, 0, &nd);
++
++	/* validate */
++	if (err || !nd.dentry || !nd.dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: bpath_walk: path_walk failed.\n");
++		return NULL;
++	}
++	return nd.dentry;
++}
++
++
++/* returns the full path of the basefile incl. its name */
++int get_mini_fo_bpath(dentry_t *dentry, char **bpath, int *bpath_len)
++{
++	char *buf_walker;
++	int len = 0;
++	dentry_t *sky_walker;
++
++	if(!dentry || !dtohd(dentry)) {
++		printk(KERN_CRIT "mini_fo: get_mini_fo_bpath: invalid dentry passed.\n");
++		return -1;
++	}
++	sky_walker = dtohd(dentry);
++
++	do {
++		len += sky_walker->d_name.len + 1 ; /* 1 for '/' */
++		sky_walker = sky_walker->d_parent;
++	} while(sky_walker != stopd(dentry->d_inode->i_sb)->base_dir_dentry);
++
++	/* 1 to oil the loop */
++	*bpath = (char*)  kmalloc(len + 1, GFP_KERNEL);
++	if(!*bpath) {
++		printk(KERN_CRIT "mini_fo: get_mini_fo_bpath: out of mem.\n");
++		return -1;
++	}
++	buf_walker = *bpath+len; /* put it on last char */
++	*buf_walker = '\n';
++	sky_walker = dtohd(dentry);
++
++	do {
++		buf_walker -= sky_walker->d_name.len;
++		strncpy(buf_walker,
++			sky_walker->d_name.name,
++			sky_walker->d_name.len);
++		*(--buf_walker) = '/';
++		sky_walker = sky_walker->d_parent;
++	} while(sky_walker != stopd(dentry->d_inode->i_sb)->base_dir_dentry);
++
++	/* bpath_len doesn't count newline! */
++	*bpath_len = len;
++ 	return 0;
++}
++
++int mini_fo_cp_cont(dentry_t *tgt_dentry, struct vfsmount *tgt_mnt,
++		    dentry_t *src_dentry, struct vfsmount *src_mnt)
++{
++	void *buf;
++	mm_segment_t old_fs;
++	file_t *tgt_file;
++	file_t *src_file;
++	int bytes, len, tmp, err;
++	err = 0;
++
++	if(!(tgt_dentry->d_inode && src_dentry->d_inode)) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR, neg. dentry passed.\n");
++		err = -EINVAL;
++		goto out;
++	}
++
++	dget(tgt_dentry);
++	dget(src_dentry);
++	mntget(tgt_mnt);
++	mntget(src_mnt);
++
++	/* open file write only */
++	tgt_file = dentry_open(tgt_dentry, tgt_mnt, 0x1);
++	if(!tgt_file || IS_ERR(tgt_file)) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR opening target file.\n");
++		err = PTR_ERR(tgt_file);
++		goto out_err;
++	}
++
++	/* open file read only */
++	src_file = dentry_open(src_dentry, src_mnt, 0x0);
++	if(!src_file || IS_ERR(src_file)) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR opening source file.\n");
++		err = PTR_ERR(src_file);
++
++		/* close target file */
++		fput(tgt_file);
++		goto out_err;
++	}
++
++	/* check if the filesystem(s) support read respective write */
++	if(!src_file->f_op->read || !tgt_file->f_op->write) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR, no fs read or write support.\n");
++		err = -EPERM;
++		goto out_close;
++	}
++
++	/* allocate a page for transfering the data */
++	buf = (void *) __get_free_page(GFP_KERNEL);
++	if(!buf) {
++		printk(KERN_CRIT "mini_fo_cp_cont: ERROR, out of kernel mem.\n");
++		goto out_err;
++	}
++
++	tgt_file->f_pos = 0;
++	src_file->f_pos = 0;
++
++	old_fs = get_fs();
++	set_fs(KERNEL_DS);
++
++	/* Doing this I assume that a read operation will return a full
++	 * buffer while there is still data to read, and a less than
++	 * full buffer when all data has been read.
++	 */
++	bytes = len = PAGE_SIZE;
++	while(bytes == len) {
++		bytes = src_file->f_op->read(src_file, buf, len,
++					     &src_file->f_pos);
++		tmp = tgt_file->f_op->write(tgt_file, buf, bytes,
++					    &tgt_file->f_pos);
++		if(tmp != bytes) {
++			printk(KERN_CRIT "mini_fo_cp_cont: ERROR writing.\n");
++			goto out_close_unset;
++		}
++	}
++
++	free_page((unsigned long) buf);
++	set_fs(old_fs);
++	fput(tgt_file);
++	fput(src_file);
++	goto out;
++
++ out_close_unset:
++	free_page((unsigned long) buf);
++	set_fs(old_fs);
++
++ out_close:
++	fput(tgt_file);
++	fput(src_file);
++
++ out_err:
++	dput(tgt_dentry);
++	dput(src_dentry);
++
++	/* mk: not sure if this need to be done */
++	mntput(tgt_mnt);
++	mntput(src_mnt);
++
++ out:
++	return err;
++}
++
++/* mk:
++ * ndl (no-duplicate list) stuff
++ * This is used in mini_fo_readdir, to save the storage directory contents
++ * and later when reading base, match them against the list in order
++ * to avoid duplicates.
++ */
++
++/* add a file specified by name and len to the ndl
++ * Return values: 0 on success, <0 on failure.
++ */
++int ndl_add_entry(struct readdir_data *rd, const char *name, int len)
++{
++	struct ndl_entry *tmp_entry;
++
++	tmp_entry = (struct ndl_entry *)
++		kmalloc(sizeof(struct ndl_entry), GFP_KERNEL);
++	if(!tmp_entry) {
++                printk(KERN_CRIT "mini_fo: ndl_add_entry: out of mem.\n");
++                return -ENOMEM;
++        }
++        tmp_entry->name = (char*) kmalloc(len, GFP_KERNEL);
++        if(!tmp_entry->name) {
++                printk(KERN_CRIT "mini_fo: ndl_add_entry: out of mem.\n");
++                return -ENOMEM;
++        }
++	strncpy(tmp_entry->name, name, len);
++        tmp_entry->len = len;
++
++        list_add(&tmp_entry->list, &rd->ndl_list);
++        rd->ndl_size++;
++        return 0;
++}
++
++/* delete all list entries and free memory */
++void ndl_put_list(struct readdir_data *rd)
++{
++	struct list_head *tmp;
++	struct ndl_entry *tmp_entry;
++
++	if(rd->ndl_size <= 0)
++		return;
++	while(!list_empty(&rd->ndl_list)) {
++		tmp = rd->ndl_list.next;
++                list_del(tmp);
++                tmp_entry = list_entry(tmp, struct ndl_entry, list);
++		kfree(tmp_entry->name);
++                kfree(tmp_entry);
++        }
++	rd->ndl_size = 0;
++}
++
++/* Check if a file specified by name and len is in the ndl
++ * Return value: 0 if not in list, 1 if file is found in ndl.
++ */
++int ndl_check_entry(struct readdir_data *rd, const char *name, int len)
++{
++	struct list_head *tmp;
++	struct ndl_entry *tmp_entry;
++
++	if(rd->ndl_size <= 0)
++		return 0;
++
++	list_for_each(tmp, &rd->ndl_list) {
++                tmp_entry = list_entry(tmp, struct ndl_entry, list);
++                if(tmp_entry->len != len)
++                        continue;
++                if(!strncmp(tmp_entry->name, name, len))
++                        return 1;
++        }
++        return 0;
++}
++
++/* mk:
++ * Recursive function to create corresponding directorys in the storage fs.
++ * The function will build the storage directorys up to dentry.
++ */
++int build_sto_structure(dentry_t *dir, dentry_t *dentry)
++{
++	int err;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++
++	if(dentry->d_parent != dir) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: invalid parameter or meta data corruption [1].\n");
++		return 1;
++	}
++
++       	if(dtost(dir) != MODIFIED) {
++		err = build_sto_structure(dir->d_parent, dentry->d_parent);
++		if(err)
++			return err;
++	}
++
++	/* ok, coming back again. */
++	check_mini_fo_dentry(dentry);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	if(!hidden_sto_dentry) {
++		/*
++		 * This is the case after creating the first
++		 * hidden_sto_dentry.
++		 * After one negative storage_dentry, all pointers to
++		 * hidden_storage dentries are set to NULL. We need to
++		 * create the negative dentry before we create the storage
++		 * file.
++		 */
++		unsigned int len;
++		const unsigned char *name;
++		len = dtohd(dentry)->d_name.len;
++		name = dtohd(dentry)->d_name.name;
++		hidden_sto_dentry = lookup_one_len(name, dtohd2(dir), len);
++		dtohd2(dentry) = hidden_sto_dentry;
++	}
++
++	/* was:	hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	/* lets be safe */
++	if(dtohd2(dir) != hidden_sto_dir_dentry) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: invalid parameter or meta data corruption [2].\n");
++		return 1;
++	}
++
++	/* check for errors in lock_parent */
++	err = PTR_ERR(hidden_sto_dir_dentry);
++	if(IS_ERR(hidden_sto_dir_dentry)) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: lock_parent failed.\n");
++		return err;
++	}
++
++	err = vfs_mkdir(hidden_sto_dir_dentry->d_inode,
++			hidden_sto_dentry,
++			dir->d_inode->i_mode);
++
++	if(err) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: failed to create storage dir [1].\n");
++		/* was: unlock_dir(dir); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&dir->d_inode->i_mutex);
++#else
++		up(&dir->d_inode->i_sem);
++#endif
++		dput(dir);
++		return err;
++	}
++
++	/* everything ok! */
++	if(!dtohd2(dentry)->d_inode) {
++		printk(KERN_CRIT "mini_fo: build_sto_structure: failed to create storage dir [2].\n");
++		/* was: unlock_dir(dir); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&dir->d_inode->i_mutex);
++#else
++		up(&dir->d_inode->i_sem);
++#endif
++		dput(dir);
++		return 1;
++	}
++
++	/* interpose the new inode and set new state */
++	itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++	dtopd(dentry)->state = MODIFIED;
++
++	/* initalize the wol list */
++	itopd(dentry->d_inode)->deleted_list_size = -1;
++	itopd(dentry->d_inode)->renamed_list_size = -1;
++	meta_build_lists(dentry);
++
++	fist_copy_attr_all(dentry->d_inode, itohi2(dentry->d_inode));
++	fist_copy_attr_timesizes(dir->d_inode,
++				 hidden_sto_dir_dentry->d_inode);
++	dir->d_inode->i_nlink++;
++	/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++	return 0;
++}
++
++
++#if 0 /* unused */
++
++/*
++ * Read "len" bytes from "filename" into "buf".
++ * "buf" is in kernel space.
++ */
++int
++mini_fo_read_file(const char *filename, void *buf, int len)
++{
++    file_t *filp;
++    mm_segment_t oldfs;
++    int bytes;
++    /* Chroot? Maybe NULL isn't right here */
++    filp = filp_open(filename, O_RDONLY, 0);
++    if (!filp || IS_ERR(filp)) {
++	printk("mini_fo_read_file err %d\n", (int) PTR_ERR(filp));
++	return -1;  /* or do something else */
++    }
++
++    if (!filp->f_op->read)
++	return -2;  /* file(system) doesn't allow reads */
++
++    /* now read len bytes from offset 0 */
++    filp->f_pos = 0;		/* start offset */
++    oldfs = get_fs();
++    set_fs(KERNEL_DS);
++    bytes = filp->f_op->read(filp, buf, len, &filp->f_pos);
++    set_fs(oldfs);
++
++    /* close the file */
++    fput(filp);
++
++    return bytes;
++}
++
++
++
++/*
++ * Write "len" bytes from "buf" to "filename"
++ * "buf" is in kernel space.
++ */
++int
++mini_fo_write_file(const char *filename, void *buf, int len)
++{
++    file_t *filp;
++    mm_segment_t oldfs;
++    int bytes;
++				/* Chroot? Maybe NULL isn't right here */
++    filp = filp_open(filename, O_RDWR|O_CREAT, 0640);
++    if (!filp || IS_ERR(filp)) {
++	printk("mini_fo_write_file err %d\n", (int) PTR_ERR(filp));
++	return -1;  /* or do something else */
++    }
++
++    if (!filp->f_op->write)
++	return -2;  /* file(system) doesn't allow writes */
++
++    /* now write len bytes from offset 0 */
++    filp->f_pos = 0;		/* start offset */
++    oldfs = get_fs();
++    set_fs(KERNEL_DS);
++    bytes = filp->f_op->write(filp, buf, len, &filp->f_pos);
++    set_fs(oldfs);
++
++    /* close the file */
++    fput(filp);
++
++    return bytes;
++}
++
++#endif /* unused */
++
+--- /dev/null
++++ b/fs/mini_fo/ChangeLog
+@@ -0,0 +1,281 @@
++2006-01-24  Markus Klotzbuecher  <mk@mary.denx.de>
++
++	* Add tons of ugly ifdefs to Ed L. Cashin's mutex patch to
++          retain backwards compatibility.
++
++2006-01-24  Ed L. Cashin <ecashin@coraid.com>
++
++	* Support for the new mutex infrastructure
++	(7892f2f48d165a34b0b8130c8a195dfd807b8cb6)
++
++2005-10-15  Markus Klotzbuecher  <mk@localhost.localdomain>
++
++	* Bugfix for a serious memory leak in mini_fo_follow_link.
++
++2005-09-21  Markus Klotzbuecher  <mk@mary>
++
++	* new release 0.6.1
++
++	* fix of a compiler warning due to changes in 2.6.13
++
++2005-09-21  Klaus Wenninger  <klaus.wenninger@siemens.com>
++
++	* file.c: readdir: fix for a bug that caused directory entries
++          to show up twice when using storage filesystems such as
++          minixfs or pramfs.
++
++2005-06-30  Eric Lammerts <eric@lammerts.org>
++
++	* fix for an oops when overwriting a binary thats beeing
++          executed.
++
++2005-06-09    <mk@mary>
++
++	* Renamed overlay to mini_fo-overlay.
++
++	* Added mini_fo-merge script to allow merging of storage and base
++	after making modifications.
++
++2005-05-22  root  <mk@mary>
++
++	* Added overlay script that allows to easily mount mini_fo ontop
++	of a given base directory
++
++2005-05-10    <mk@mary>
++
++	* inode.c: xattr functions return -EOPNOSUPP instead of
++          -ENOSUPP, what confuses "ls -l"
++
++	* Changed license from LGPL to GPL.
++
++2005-05-08  root  <mk@mary>
++
++	* Makefile: clean it up and added make install and make
++          uninstall.
++
++2005-05-06    <mk@mary>
++
++	* merged devel branch back to main. [v0-6-0-pre3]
++
++	* removed unused files print.c and fist_ioctl. [devel-0-0-18]
++
++	* ioctl: removed fist_ioctl stuff, that is not needed for
++          now.
++
++2005-05-03    <mk@mary>
++
++	* file.c: simplified mini_fo_open and mini_fo_setattr using
++          new state changing functions. [devel-0-0-17]
++
++	* inode.c: Fixed getattr state bug (see below) in 2.4 function
++          mini_fo_inode revalidate.
++
++	* inode.c: found an other bug in mini_fo_getattr. States are not
++	  reliable in this function, as a file can be opened, unlinked and
++	  the getattr function called. This results in a deleted dentry
++	  with an inode. Fix is to ignore states and simply use the inode
++	  available.
++
++2005-04-29    <mk@mary>
++
++	* file.c: Bugfix and cleanup in fasync and fsync. [devel-0-0-16]
++
++	* file.c: do not use mini_fo_lock so the generic version is
++          used (I guess).
++
++	* inode.c: getattr, never call getattr on lower files, as this
++          will cause the inum to change.
++
++	* inode.c: rename_reg_file renamed to rename_nondir, as it
++          doesn't matter as long it't not a dir. Removed all
++          rename_dev_file etc.
++
++	* tagged as devel-0-0-15
++
++	* inode.c: added support for chosing support for extended
++          attrs at compile time by XATTR define in mini_fo.h .
++
++	* inode.c: fixed mini_fo_getattr to use mini_fo inode and not
++          lower again, what avoids inode number changes that confused
++          rm again. This is the proper solution.
++
++2005-04-24    <mk@mary>
++
++	* all files: updated Copyright notive to 2005. [devel-0-0-14]
++
++	* inode.c: fixed mini_fo_getattr to not change the inode
++          number, even if lower files change.
++
++	* super.c: fixed a bug that caused deleted base file to show
++          up suddenly after some time, or after creating a special
++          file. The problem was that after some time or after special
++          file creating sync_sb_inodes is called by the vfs, that
++          called our mini_fo_put_inode. There was (wrongly) called
++          __meta_put_lists, that nuked the lists, although the inode
++          was going to continue its life. Moving __meta_put_lists to
++          mini_fo_clear_inode, where an inode is really destroyed,
++          solved the problem.
++
++
++2005-04-23    <mk@mary>
++
++	* state.c, aux.c: more cleaning up and
++          simplifications. [devel-0-0-13]
++
++	* inode.c: implemented mini_fo_getattr, that was required for
++          2.6 because inode_revalidate has been remove there, and the
++	  old "du" bug returned.
++
++
++2005-04-20    <mk@mary>
++
++	* aux.c: get_neg_sto_dentry(): allow to be called for dentries
++          in state UNMODIFIED, NON_EXISTANT _and_ DELETED.
++
++2005-04-19    <mk@mary>
++
++	* Fixed a bug under 2.6 that caused files deleted via mini_fo
++          not to be deleted properly and therefore the fs filled up
++          untill no memory was left. [devel-0-0-12]
++
++	* Added basic hard link support. This means that creating
++          hardlinks will work, but existing ones will be treated as
++          individual files. [devel-0-0-11]
++
++2005-04-17    <mk@mary>
++
++	* Bugfixes
++
++2005-04-13  root  <mk@mary>
++
++	* Added file state.c for the state transition
++          functions. Doesn't work very well yet, though...
++
++2005-04-12    <mk@mary>
++
++	* Porting to 2.6 started, which is easier than expected, also
++          due to Olivier previous work.
++
++2005-04-08    <mk@mary>
++
++	* Fixed the bug that caused du to return invalid sizes of
++          directory trees. The problem was that
++          mini_fo_inode_revalidate didn't always copy the attributes
++          from the base inode properly.
++
++2005-04-01  Markus Klotzbuecher  <mk@chasey>
++
++	* Merged devel branch back to main trunk and updated the
++          RELEASE notes. This will be 0-6-0-pre1.
++
++2005-03-31  Markus Klotzbuecher  <mk@chasey>
++
++	* Fixed some bugs in rename_reg_file, that only showed up in
++          the kernel compile test. Kernel compiles cleanly ontop of
++          mini_fo, now also make mrproper etc. work. Seems pretty stable.
++
++2005-03-28  Markus Klotzbuecher  <mk@chasey>
++
++	* Many, many directory renaming bugfixes and a lot of other
++          cleanup. Dir renaming seems to work relatively stable.
++
++2005-03-22  Markus Klotzbuecher  <mk@chasey>
++
++	* Finished implementing lightweight directory renaming. Some
++          basic testing indicates it works fine.
++	  Next is to implement testcases for the testsuite and confirm
++          everything is really working ok.
++
++2005-03-18  Markus Klotzbuecher  <mk@chasey>
++
++	* Finished implementing meta.c stuff required for directory
++          renaming.
++
++2005-03-17  Markus Klotzbuecher  <mk@chasey>
++
++	* Fixed all compile warnings + an extremly old bug that
++          somehow crept in while reworking the wol stuff to the META
++          system. Turning on -Werror again... :-)
++
++	* Fixed some bugs in the new rename_reg_file function.
++
++	* Rewrote mini_fo rename and split it into several
++          subfunctions, that handle the different types
++          seperately. Rewrote the regular file function aswell, as it
++          was implemented somewhat inefficient.
++
++2005-03-16  Markus Klotzbuecher  <mk@chasey>
++
++	* Implemented new META subsystem, removed old WOL stuff in favor
++	  if it.
++
++	* After some basic testing everything seems ok...
++
++2005-03-11  Markus Klotzbuecher  <mk@chasey>
++
++	* Renaming a non regular file caused trouble because I always
++	  tried to copy the contents. Now I only do this for regular
++	  files. mini_fo_rename still isn't implemented properly, renaming
++	  of device files, symlinks etc. results in a empty regular file
++	  instead of the proper type.
++
++	* Directory renaming suddenly works! What a surprise! I guess
++          this is because renaming is implemented as making a copy and
++          removing the original. Still this might not work
++          everywhere...
++
++2005-03-09  Markus Klotzbuecher  <mk@chasey>
++
++	* Bugfix, when a mini_fo directory that exists in storage
++  	  (state: MODIFIED, CREATED and DEL_REWRITTEN) is deleted, a
++  	  possibly existing WOL file contained in it needs to be
++  	  deleted too.
++
++	* Starting cleanup: defined state names in order to get rid of
++          the state numbers.
++
++2005-03-08  Markus Klotzbuecher  <mk@chasey>
++
++	* Makefile fix, fist_ioctl was built against wrong sources if ARCH=um
++
++	* Fixed a bug in dentry.c, mini_fo_d_hash. In state 4 =
++          DEL_REWRITTEN the hash was calculated from the base dentry,
++          which was wrong and and caused assertions in
++          __mini_fo_hidden_dentry to fail.
++
++2005-02-21    <mk@mary>
++
++	* Implemented directory deleting (inode.c)
++
++	* main.c: made mini_fo_parse_options a little more robust.
++
++2004-12-22    <mk@mary>
++
++	* Makefile cleanup and uml stuff, removed unneccessary files
++
++	* Created a new and hopefully more informative README
++
++	* CHANGELOG: created a new CHANGELOG and added old entries reversely
++
++
++2004-10-24 Gleb Natapov <gleb@nbase.co.il>
++
++	* Fix: owner and group where not correctly copied from base to
++          storage.
++
++
++2004-10-05 Gleb Natapov <gleb@nbase.co.il>
++
++	* Implementation of fsync, fasync and lock mini_fo functions.
++
++
++2004-09-29 Bob Lee <bob@pantasys.com>
++
++	* Fix of a serious pointer bug
++
++
++2004-09-28 Gleb Natapov <gleb@nbase.co.il>
++
++	* Implementation of mini_fo_mknod and mini_fo_rename, support
++          for device files.
++
+--- /dev/null
++++ b/fs/mini_fo/dentry.c
+@@ -0,0 +1,244 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++
++/*
++ * THIS IS A BOOLEAN FUNCTION: returns 1 if valid, 0 otherwise.
++ */
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_d_revalidate(dentry_t *dentry, struct nameidata *nd)
++#else
++mini_fo_d_revalidate(dentry_t *dentry, int flags)
++#endif
++{
++	int err1 = 1; /* valid = 1, invalid = 0 */
++	int err2 = 1;
++	dentry_t *hidden_dentry;
++	dentry_t *hidden_sto_dentry;
++
++
++	check_mini_fo_dentry(dentry);
++
++	hidden_dentry  = dtohd(dentry);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	if(hidden_dentry &&
++	   hidden_dentry->d_op &&
++	   hidden_dentry->d_op->d_revalidate) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		err1 = hidden_dentry->d_op->d_revalidate(hidden_dentry, nd);
++#else
++		err1 = hidden_dentry->d_op->d_revalidate(hidden_dentry, flags);
++#endif
++	}
++	if(hidden_sto_dentry &&
++	   hidden_sto_dentry->d_op &&
++	   hidden_sto_dentry->d_op->d_revalidate) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		err2 = hidden_sto_dentry->d_op->d_revalidate(hidden_sto_dentry,
++							     nd);
++#else
++		err2 = hidden_sto_dentry->d_op->d_revalidate(hidden_sto_dentry,
++							     flags);
++#endif
++	}
++
++	/* mk: if one of the lower level dentries are valid,
++	 * the mini_fo dentry is too.
++	 */
++	return (err1 || err2);
++}
++
++
++STATIC int
++mini_fo_d_hash(dentry_t *dentry, qstr_t *name)
++{
++	int err = 0;
++	dentry_t *hidden_dentry;
++	dentry_t *hidden_sto_dentry;
++
++	/* hidden_dentry = mini_fo_hidden_dentry(dentry);
++	 * hidden_sto_dentry = mini_fo_hidden_sto_dentry(dentry); */
++
++	/* state 1, 3, 4, 5: build the hash for the storage dentry */
++	if((dtopd(dentry)->state == MODIFIED) ||
++	   (dtopd(dentry)->state == CREATED) ||
++	   (dtopd(dentry)->state == DEL_REWRITTEN) ||
++	   (dtopd(dentry)->state == DELETED)) {
++		hidden_sto_dentry = dtohd2(dentry);
++		if(hidden_sto_dentry &&
++		   hidden_sto_dentry->d_op &&
++		   hidden_sto_dentry->d_op->d_hash) {
++			err = hidden_sto_dentry->d_op->d_hash(hidden_sto_dentry, name);
++		}
++		goto out;
++	}
++	/* state 2: build the hash for the base dentry */
++	if(dtopd(dentry)->state == UNMODIFIED) {
++		hidden_dentry = dtohd(dentry);
++		if(hidden_dentry &&
++		   hidden_dentry->d_op &&
++		   hidden_dentry->d_op->d_hash) {
++			err = hidden_dentry->d_op->d_hash(hidden_dentry, name);
++		}
++		goto out;
++	}
++	/* state 6: build hash for the dentry that exists */
++	if(dtopd(dentry)->state == NON_EXISTANT) {
++		hidden_sto_dentry = dtohd2(dentry);
++		if(hidden_sto_dentry &&
++		   hidden_sto_dentry->d_op &&
++		   hidden_sto_dentry->d_op->d_hash) {
++			err = hidden_sto_dentry->d_op->d_hash(hidden_sto_dentry, name);
++			goto out;
++		}
++		hidden_dentry = dtohd(dentry);
++		if(hidden_dentry &&
++		   hidden_dentry->d_op &&
++		   hidden_dentry->d_op->d_hash) {
++			err = hidden_dentry->d_op->d_hash(hidden_dentry, name);
++			goto out;
++		}
++	}
++
++	printk(KERN_CRIT "mini_fo: d_hash: invalid state detected.\n");
++
++ out:
++	return err;
++}
++
++
++STATIC int
++mini_fo_d_compare(dentry_t *dentry, qstr_t *a, qstr_t *b)
++{
++	int err;
++	dentry_t *hidden_dentry=NULL;
++
++	/* hidden_dentry = mini_fo_hidden_dentry(dentry); */
++	if(dtohd2(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else if(dtohd(dentry))
++		hidden_dentry = dtohd(dentry);
++
++	if (hidden_dentry && hidden_dentry->d_op && hidden_dentry->d_op->d_compare) {
++		err = hidden_dentry->d_op->d_compare(hidden_dentry, a, b);
++	} else {
++		err = ((a->len != b->len) || memcmp(a->name, b->name, b->len));
++	}
++
++	return err;
++}
++
++
++int
++mini_fo_d_delete(dentry_t *dentry)
++{
++	dentry_t *hidden_dentry;
++	dentry_t *hidden_sto_dentry;
++	int err = 0;
++
++	/* this could be a negative dentry, so check first */
++	if (!dtopd(dentry)) {
++		printk(KERN_CRIT "mini_fo_d_delete: negative dentry passed.\n");
++		goto out;
++	}
++	hidden_dentry = dtohd(dentry);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	if(hidden_dentry) {
++		if(hidden_dentry->d_op &&
++		   hidden_dentry->d_op->d_delete) {
++			err = hidden_dentry->d_op->d_delete(hidden_dentry);
++		}
++	}
++	if(hidden_sto_dentry) {
++		if(hidden_sto_dentry->d_op &&
++		   hidden_sto_dentry->d_op->d_delete) {
++			err = hidden_sto_dentry->d_op->d_delete(hidden_sto_dentry);
++		}
++	}
++
++ out:
++	return err;
++}
++
++
++void
++mini_fo_d_release(dentry_t *dentry)
++{
++	dentry_t *hidden_dentry;
++	dentry_t *hidden_sto_dentry;
++
++
++	/* this could be a negative dentry, so check first */
++	if (!dtopd(dentry)) {
++		printk(KERN_CRIT "mini_fo_d_release: no private data.\n");
++		goto out;
++	}
++	hidden_dentry = dtohd(dentry);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	if(hidden_dentry) {
++		/* decrement hidden dentry's counter and free its inode */
++		dput(hidden_dentry);
++	}
++	if(hidden_sto_dentry) {
++                /* decrement hidden dentry's counter and free its inode */
++		dput(hidden_sto_dentry);
++	}
++
++	/* free private data (mini_fo_dentry_info) here */
++	kfree(dtopd(dentry));
++	__dtopd(dentry) = NULL;	/* just to be safe */
++ out:
++	return;
++}
++
++
++/*
++ * we don't really need mini_fo_d_iput, because dentry_iput will call iput() if
++ * mini_fo_d_iput is not defined. We left this implemented for ease of
++ * tracing/debugging.
++ */
++void
++mini_fo_d_iput(dentry_t *dentry, inode_t *inode)
++{
++	iput(inode);
++}
++
++
++struct dentry_operations mini_fo_dops = {
++	d_revalidate:	mini_fo_d_revalidate,
++	d_hash:		mini_fo_d_hash,
++	d_compare:		mini_fo_d_compare,
++	d_release:		mini_fo_d_release,
++	d_delete:		mini_fo_d_delete,
++	d_iput:		mini_fo_d_iput,
++};
+--- /dev/null
++++ b/fs/mini_fo/file.c
+@@ -0,0 +1,713 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++#define ROUND_UP(x) (((x)+sizeof(long)-1) & ~(sizeof(long)-1))
++
++/*******************
++ * File Operations *
++ *******************/
++
++STATIC loff_t
++mini_fo_llseek(file_t *file, loff_t offset, int origin)
++{
++	loff_t err;
++	file_t *hidden_file = NULL;
++
++	if(S_ISDIR(file->f_dentry->d_inode->i_mode)) {
++		/* Check if trying to llseek from a directory */
++		err = -EISDIR;
++		goto out;
++	}
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			hidden_file = ftohf(file);
++		}
++	}
++
++	/* always set hidden position to this one */
++	hidden_file->f_pos = file->f_pos;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	memcpy(&(hidden_file->f_ra),
++	       &(file->f_ra),
++	       sizeof(struct file_ra_state));
++#else
++	if (file->f_reada) { /* update readahead information if needed */
++		hidden_file->f_reada = file->f_reada;
++		hidden_file->f_ramax = file->f_ramax;
++		hidden_file->f_raend = file->f_raend;
++		hidden_file->f_ralen = file->f_ralen;
++		hidden_file->f_rawin = file->f_rawin;
++	}
++#endif
++	if (hidden_file->f_op && hidden_file->f_op->llseek)
++		err = hidden_file->f_op->llseek(hidden_file, offset, origin);
++	else
++		err = generic_file_llseek(hidden_file, offset, origin);
++
++	if (err < 0)
++		goto out;
++
++	if (err != file->f_pos) {
++		file->f_pos = err;
++		// ION maybe this?
++		// 	file->f_pos = hidden_file->f_pos;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++		file->f_reada = 0;
++#endif
++		file->f_version++;
++	}
++
++ out:
++	return err;
++}
++
++
++/* mk: fanout capable */
++STATIC ssize_t
++mini_fo_read(file_t *file, char *buf, size_t count, loff_t *ppos)
++{
++	int err = -EINVAL;
++	file_t *hidden_file = NULL;
++	loff_t pos = *ppos;
++
++	if(S_ISDIR(file->f_dentry->d_inode->i_mode)) {
++		/* Check if trying to read from a directory */
++		/* printk(KERN_CRIT "mini_fo_read: ERROR: trying to read data from a directory.\n"); */
++		err = -EISDIR;
++		goto out;
++	}
++
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			hidden_file = ftohf(file);
++		}
++	}
++
++	if (!hidden_file->f_op || !hidden_file->f_op->read)
++		goto out;
++
++	err = hidden_file->f_op->read(hidden_file, buf, count, &pos);
++	*ppos = pos;
++
++	if (err >= 0) {
++		/* atime should also be updated for reads of size zero or more */
++		fist_copy_attr_atime(file->f_dentry->d_inode,
++				     hidden_file->f_dentry->d_inode);
++	}
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	/*
++	 * MAJOR HACK
++	 * because pread() does not have any way to tell us that it is
++	 * our caller, then we don't know for sure if we have to update
++	 * the file positions.  This hack relies on read() having passed us
++	 * the "real" pointer of its struct file's f_pos field.
++	 */
++	if (ppos == &file->f_pos)
++		hidden_file->f_pos = *ppos = pos;
++	if (hidden_file->f_reada) { /* update readahead information if needed */
++		file->f_reada = hidden_file->f_reada;
++		file->f_ramax = hidden_file->f_ramax;
++		file->f_raend = hidden_file->f_raend;
++		file->f_ralen = hidden_file->f_ralen;
++		file->f_rawin = hidden_file->f_rawin;
++	}
++#else
++	memcpy(&(file->f_ra),&(hidden_file->f_ra),sizeof(struct file_ra_state));
++#endif
++
++ out:
++	return err;
++}
++
++
++/* this mini_fo_write() does not modify data pages! */
++STATIC ssize_t
++mini_fo_write(file_t *file, const char *buf, size_t count, loff_t *ppos)
++{
++	int err = -EINVAL;
++	file_t *hidden_file = NULL;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	loff_t pos = *ppos;
++
++	/* mk: fan out: */
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			/* This is bad! We have no storage file to write to. This
++			 * should never happen because if a file is opened for
++			 * writing, a copy should have been made earlier.
++			 */
++			printk(KERN_CRIT "mini_fo: write : ERROR, no storage file to write.\n");
++			err = -EINVAL;
++			goto out;
++		}
++	}
++
++	inode = file->f_dentry->d_inode;
++	hidden_inode = itohi2(inode);
++	if(!hidden_inode) {
++		printk(KERN_CRIT "mini_fo: write: no sto inode found, not good.\n");
++		goto out;
++	}
++
++	if (!hidden_file->f_op || !hidden_file->f_op->write)
++		goto out;
++
++	/* adjust for append -- seek to the end of the file */
++	if (file->f_flags & O_APPEND)
++		pos = inode->i_size;
++
++	err = hidden_file->f_op->write(hidden_file, buf, count, &pos);
++
++	/*
++	 * copy ctime and mtime from lower layer attributes
++	 * atime is unchanged for both layers
++	 */
++	if (err >= 0)
++		fist_copy_attr_times(inode, hidden_inode);
++
++	*ppos = pos;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	/*
++	 * XXX: MAJOR HACK
++	 *
++	 * because pwrite() does not have any way to tell us that it is
++	 * our caller, then we don't know for sure if we have to update
++	 * the file positions.  This hack relies on write() having passed us
++	 * the "real" pointer of its struct file's f_pos field.
++	 */
++	if (ppos == &file->f_pos)
++		hidden_file->f_pos = *ppos = pos;
++#endif
++	/* update this inode's size */
++	if (pos > inode->i_size)
++		inode->i_size = pos;
++
++ out:
++	return err;
++}
++
++/* Global variable to hold a file_t pointer.
++ * This serves to allow mini_fo_filldir function to know which file is
++ * beeing read, which is required for two reasons:
++ *
++ *   - be able to call wol functions in order to avoid listing deleted
++ *     base files.
++ *   - if we're reading a directory which is in state 1, we need to
++ *     maintain a list (in mini_fo_filldir) of which files allready
++ *     have been copied to userspace,to detect files existing in base
++ *     and storage and not list them twice.
++ */
++filldir_t mini_fo_filldir_orig;
++file_t *mini_fo_filldir_file;
++
++/* mainly copied from fs/readdir.c */
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++mini_fo_filldir(void * __buf, const char * name, int namlen, loff_t offset,
++		  u64 ino, unsigned int d_type)
++#else
++mini_fo_filldir(void * __buf, const char * name, int namlen, loff_t offset,
++		  ino_t ino, unsigned int d_type)
++#endif
++{
++	struct getdents_callback * buf = (struct getdents_callback *) __buf;
++	file_t* file = mini_fo_filldir_file;
++
++	/* In theses states we filter meta files in storage (WOL) */
++	if(file && (dtopd(file->f_dentry)->state == MODIFIED ||
++		    dtopd(file->f_dentry)->state == CREATED ||
++		    dtopd(file->f_dentry)->state == DEL_REWRITTEN)) {
++
++		int tmp = strlen(META_FILENAME);
++		if(tmp  == namlen) {
++			if(!strncmp(name, META_FILENAME, namlen))
++				return 0;
++		}
++	}
++
++	/* check if we are merging the contents of storage and base */
++	if(file && dtopd(file->f_dentry)->state == MODIFIED) {
++		/* check if we are still reading storage contents, if
++		 * yes, we just save the name of the file for duplicate
++		 * checking later. */
++
++		if(!ftopd(file)->rd.sto_done) {
++			/* put file into ndl list */
++			if(ndl_add_entry(&ftopd(file)->rd, name, namlen))
++				printk(KERN_CRIT "mini_fo_filldir: Error adding to ndl.\n");
++		} else {
++			/* check if file has been deleted */
++			if(meta_check_d_entry(file->f_dentry, name, namlen))
++				return 0;
++
++			/* do duplicate checking */
++			if(ndl_check_entry(&ftopd(file)->rd, name, namlen))
++				return 0;
++		}
++	}
++
++	return mini_fo_filldir_orig(buf, name, namlen, offset, ino, d_type);
++}
++
++
++STATIC int
++mini_fo_readdir(file_t *file, void *dirent, filldir_t filldir)
++{
++	int err = 0;/* mk: ??? -ENOTDIR; */
++	file_t *hidden_file = NULL;
++	file_t *hidden_sto_file = NULL;
++	inode_t *inode;
++	struct getdents_callback *buf;
++	int oldcount;
++
++#if defined(FIST_FILTER_NAME) || defined(FIST_FILTER_SCA)
++	struct mini_fo_getdents_callback buf;
++#endif /* FIST_FILTER_NAME || FIST_FILTER_SCA */
++
++	buf = (struct getdents_callback *) dirent;
++	oldcount = buf->count;
++	inode = file->f_dentry->d_inode;
++	mini_fo_filldir_file = file;
++	mini_fo_filldir_orig = filldir;
++
++	ftopd(file)->rd.sto_done = 0;
++	do {
++		if (ftopd(file) != NULL) {
++			if(ftohf2(file)) {
++				hidden_sto_file = ftohf2(file);
++				err = vfs_readdir(hidden_sto_file, mini_fo_filldir, dirent);
++				file->f_pos = hidden_sto_file->f_pos;
++				if (err > 0)
++					fist_copy_attr_atime(inode, hidden_sto_file->f_dentry->d_inode);
++				/* not finshed yet, we'll be called again */
++				if (buf->count != oldcount)
++					break;
++			}
++
++			ftopd(file)->rd.sto_done = 1;
++
++			if(ftohf(file)) {
++				hidden_file = ftohf(file);
++				err = vfs_readdir(hidden_file, mini_fo_filldir, dirent);
++				file->f_pos = hidden_file->f_pos;
++				if (err > 0)
++					fist_copy_attr_atime(inode, hidden_file->f_dentry->d_inode);
++			}
++
++		}
++	} while (0);
++
++	/* mk:
++	 * we need to check if all the directory data has been copied to userspace,
++	 * or if we will be called again by userspace to complete the operation.
++	 */
++	if(buf->count == oldcount) {
++		ndl_put_list(&ftopd(file)->rd);
++	}
++
++	/* unset this, safe */
++	mini_fo_filldir_file = NULL;
++	return err;
++}
++
++
++STATIC unsigned int
++mini_fo_poll(file_t *file, poll_table *wait)
++{
++	unsigned int mask = DEFAULT_POLLMASK;
++	file_t *hidden_file = NULL;
++
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			hidden_file = ftohf(file);
++		}
++	}
++
++	if (!hidden_file->f_op || !hidden_file->f_op->poll)
++		goto out;
++
++	mask = hidden_file->f_op->poll(hidden_file, wait);
++
++ out:
++	return mask;
++}
++
++/* FIST-LITE special version of mmap */
++STATIC int
++mini_fo_mmap(file_t *file, vm_area_t *vma)
++{
++	int err = 0;
++	file_t *hidden_file = NULL;
++
++	/* fanout capability */
++	if (ftopd(file) != NULL) {
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++		} else {
++			hidden_file = ftohf(file);
++		}
++	}
++
++	ASSERT(hidden_file != NULL);
++	ASSERT(hidden_file->f_op != NULL);
++	ASSERT(hidden_file->f_op->mmap != NULL);
++
++	vma->vm_file = hidden_file;
++	err = hidden_file->f_op->mmap(hidden_file, vma);
++	get_file(hidden_file); /* make sure it doesn't get freed on us */
++	fput(file);	       /* no need to keep extra ref on ours */
++
++	return err;
++}
++
++
++
++STATIC int
++mini_fo_open(inode_t *inode, file_t *file)
++{
++	int err = 0;
++ 	int hidden_flags;
++	file_t *hidden_file = NULL;
++	dentry_t *hidden_dentry = NULL;
++
++	/* fanout stuff */
++	file_t *hidden_sto_file = NULL;
++	dentry_t *hidden_sto_dentry = NULL;
++
++	__ftopd(file) =
++		kmalloc(sizeof(struct mini_fo_file_info), GFP_KERNEL);
++	if (!ftopd(file)) {
++		err = -ENOMEM;
++		goto out;
++	}
++
++	/* init the readdir_helper structure */
++	INIT_LIST_HEAD(&ftopd(file)->rd.ndl_list);
++	ftopd(file)->rd.ndl_size = 0;
++
++	/* In certain paths this could stay uninitalized and cause trouble */
++	ftohf(file) = NULL;
++	ftohf2(file) = NULL;
++	hidden_flags = file->f_flags;
++
++	/* create storage files? */
++	if(dtost(file->f_dentry) == UNMODIFIED) {
++		if(!IS_WRITE_FLAG(file->f_flags)) {
++			hidden_dentry = dtohd(file->f_dentry);
++			dget(hidden_dentry);
++			/* dentry_open will decrement mnt refcnt if err.
++			 * otherwise fput() will do an mntput() for us upon file close. */
++			mntget(stopd(inode->i_sb)->hidden_mnt);
++			hidden_file = dentry_open(hidden_dentry,
++						  stopd(inode->i_sb)->hidden_mnt,
++						  hidden_flags);
++			if (IS_ERR(hidden_file)) {
++				err = PTR_ERR(hidden_file);
++				dput(hidden_dentry);
++				goto out;
++			}
++			ftohf(file) = hidden_file;	/* link two files */
++			goto out;
++		}
++		else {
++			if(S_ISDIR(file->f_dentry->d_inode->i_mode)) {
++				err = dir_unmod_to_mod(file->f_dentry);
++			} else
++				err = nondir_unmod_to_mod(file->f_dentry, 1);
++
++			if (err) {
++				printk("mini_fo_open: ERROR creating storage file.\n");
++				goto out;
++			}
++		}
++	}
++	hidden_sto_dentry = dtohd2(file->f_dentry);
++	dget(hidden_sto_dentry);
++
++	if(dtopd(file->f_dentry)->state == MODIFIED) {
++		/* Directorys are special, interpose on both lower level files */
++		if(S_ISDIR(itohi(inode)->i_mode)) {
++			/* check for invalid file types of lower level files */
++			if(!(S_ISDIR(itohi(inode)->i_mode) && S_ISDIR(itohi2(inode)->i_mode))) {
++				printk(KERN_CRIT "mini_fo_open: meta data corruption detected.\n");
++				dput(hidden_sto_dentry);
++				err = -EINVAL;
++				goto out;
++			}
++
++			/* lower level directorys are ok, open the base file */
++			hidden_dentry = dtohd(file->f_dentry);
++			dget(hidden_dentry);
++
++			mntget(stopd(inode->i_sb)->hidden_mnt);
++			hidden_file = dentry_open(hidden_dentry,
++						  stopd(inode->i_sb)->hidden_mnt,
++						  hidden_flags);
++			if (IS_ERR(hidden_file)) {
++				err = PTR_ERR(hidden_file);
++				dput(hidden_dentry);
++				dput(hidden_sto_dentry);
++				goto out;
++			}
++			ftohf(file) = hidden_file; /* link the two files */
++		}
++	}
++
++	if(!exists_in_storage(file->f_dentry)) {
++		printk(KERN_CRIT "mini_fo_open: invalid file state detected.\n");
++		err = -EINVAL;
++		dput(hidden_sto_dentry);
++
++		/* If the base file has been opened, we need to close it here */
++		if(ftohf(file)) {
++			if (hidden_file->f_op && hidden_file->f_op->flush)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++				hidden_file->f_op->flush(hidden_file, NULL);
++#else
++				hidden_file->f_op->flush(hidden_file);
++#endif
++			dput(hidden_dentry);
++		}
++		goto out;
++	}
++
++	/* ok, now we can safely open the storage file */
++	mntget(stopd(inode->i_sb)->hidden_mnt2);
++	hidden_sto_file = dentry_open(hidden_sto_dentry,
++				      stopd(inode->i_sb)->hidden_mnt2,
++				      hidden_flags);
++
++	/* dentry_open dputs the dentry if it fails */
++	if (IS_ERR(hidden_sto_file)) {
++		err = PTR_ERR(hidden_sto_file);
++		/* close base file if open */
++		if(ftohf(file)) {
++			if (hidden_file->f_op && hidden_file->f_op->flush)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++				hidden_file->f_op->flush(hidden_file, NULL);
++#else
++				hidden_file->f_op->flush(hidden_file);
++#endif
++			dput(hidden_dentry);
++		}
++		goto out;
++	}
++	ftohf2(file) = hidden_sto_file; /* link storage file */
++
++ out:
++	if (err < 0 && ftopd(file)) {
++		kfree(ftopd(file));
++	}
++	return err;
++}
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++mini_fo_flush(file_t *file, fl_owner_t id)
++#else
++mini_fo_flush(file_t *file)
++#endif
++{
++	int err1 = 0;		/* assume ok (see open.c:close_fp) */
++	int err2 = 0;
++	file_t *hidden_file = NULL;
++
++	check_mini_fo_file(file);
++
++	/* mk: we don't do any state checking here, as its not worth the time.
++	 * Just flush the lower level files if they exist.
++	 */
++	if(ftopd(file) != NULL) {
++		if(ftohf(file) != NULL) {
++			hidden_file = ftohf(file);
++			if (hidden_file->f_op && hidden_file->f_op->flush)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++				err1 = hidden_file->f_op->flush(hidden_file, id);
++#else
++				err1 = hidden_file->f_op->flush(hidden_file);
++#endif
++		}
++		if(ftohf2(file) != NULL) {
++			hidden_file = ftohf2(file);
++			if (hidden_file->f_op && hidden_file->f_op->flush)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++				err2 = hidden_file->f_op->flush(hidden_file, id);
++#else
++				err2 = hidden_file->f_op->flush(hidden_file);
++#endif
++		}
++	}
++	return (err1 | err2);
++}
++
++
++STATIC int
++mini_fo_release(inode_t *inode, file_t *file)
++{
++	int err = 0;
++	file_t *hidden_file = NULL;
++
++	if (ftopd(file) != NULL) {
++		if(ftohf(file)) {
++			hidden_file = ftohf(file);
++			fput(hidden_file);
++		}
++		if(ftohf2(file)) {
++			hidden_file = ftohf2(file);
++			fput(hidden_file);
++		}
++		kfree(ftopd(file));
++	}
++	return err;
++}
++
++STATIC int
++mini_fo_fsync(file_t *file, dentry_t *dentry, int datasync)
++{
++	int err1 = 0;
++	int err2 = 0;
++	file_t *hidden_file = NULL;
++	dentry_t *hidden_dentry;
++
++	check_mini_fo_file(file);
++
++	if ((hidden_file = ftohf(file)) != NULL) {
++		hidden_dentry = dtohd(dentry);
++		if (hidden_file->f_op && hidden_file->f_op->fsync) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++			mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++			down(&hidden_dentry->d_inode->i_sem);
++#endif
++			err1 = hidden_file->f_op->fsync(hidden_file, hidden_dentry, datasync);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++			mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++			up(&hidden_dentry->d_inode->i_sem);
++#endif
++		}
++	}
++
++	if ((hidden_file = ftohf2(file)) != NULL) {
++		hidden_dentry = dtohd2(dentry);
++		if (hidden_file->f_op && hidden_file->f_op->fsync) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++			mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++			down(&hidden_dentry->d_inode->i_sem);
++#endif
++			err2 = hidden_file->f_op->fsync(hidden_file, hidden_dentry, datasync);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++			mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++			up(&hidden_dentry->d_inode->i_sem);
++#endif
++		}
++	}
++	else
++		goto err;
++
++err:
++	return (err1 || err2);
++}
++
++
++STATIC int
++mini_fo_fasync(int fd, file_t *file, int flag)
++{
++	int err1 = 0;
++	int err2 = 0;
++
++	file_t *hidden_file = NULL;
++
++	check_mini_fo_file(file);
++
++	if((hidden_file = ftohf(file)) != NULL) {
++		err1 = hidden_file->f_op->fasync(fd, hidden_file, flag);
++	}
++	if((hidden_file = ftohf2(file)) != NULL) {
++		err2 = hidden_file->f_op->fasync(fd, hidden_file, flag);
++	}
++
++	return (err1 || err2);
++}
++
++
++
++struct file_operations mini_fo_dir_fops =
++	{
++		read:	generic_read_dir,
++		write:	mini_fo_write,
++		readdir: mini_fo_readdir,
++		poll:	mini_fo_poll,
++		/* ioctl:	mini_fo_ioctl, */
++		mmap:	mini_fo_mmap,
++		open:	mini_fo_open,
++		flush:	mini_fo_flush,
++		release: mini_fo_release,
++		fsync:	mini_fo_fsync,
++		fasync:	mini_fo_fasync,
++		/* not needed lock:	mini_fo_lock, */
++		/* not needed: readv */
++		/* not needed: writev */
++		/* not implemented: sendpage */
++		/* not implemented: get_unmapped_area */
++	};
++
++struct file_operations mini_fo_main_fops =
++	{
++		llseek:	mini_fo_llseek,
++		read:	mini_fo_read,
++		write:	mini_fo_write,
++		readdir: mini_fo_readdir,
++		poll:	mini_fo_poll,
++		/* ioctl:	mini_fo_ioctl, */
++		mmap:	mini_fo_mmap,
++		open:	mini_fo_open,
++		flush:	mini_fo_flush,
++		release: mini_fo_release,
++		fsync:	mini_fo_fsync,
++		fasync:	mini_fo_fasync,
++		/* not needed: lock:	mini_fo_lock, */
++		/* not needed: readv */
++		/* not needed: writev */
++		/* not implemented: sendpage */
++		/* not implemented: get_unmapped_area */
++	};
+--- /dev/null
++++ b/fs/mini_fo/fist.h
+@@ -0,0 +1,254 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++
++/*
++ *  $Id$
++ */
++
++#ifndef __FIST_H_
++#define __FIST_H_
++
++/*
++ * KERNEL ONLY CODE:
++ */
++#ifdef __KERNEL__
++#include <linux/version.h>
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,33)
++#include <generated/autoconf.h>
++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19)
++#include <linux/autoconf.h>
++#else
++#include <linux/config.h>
++#endif
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++#ifdef CONFIG_MODVERSIONS
++# define MODVERSIONS
++# include <linux/modversions.h>
++#endif /* CONFIG_MODVERSIONS */
++#endif /* KERNEL_VERSION < 2.6.0 */
++#include <linux/sched.h>
++#include <linux/kernel.h>
++#include <linux/mm.h>
++#include <linux/string.h>
++#include <linux/stat.h>
++#include <linux/errno.h>
++#include <linux/wait.h>
++#include <linux/limits.h>
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++#include <linux/locks.h>
++#else
++#include <linux/buffer_head.h>
++#include <linux/pagemap.h>
++#include <linux/namei.h>
++#include <linux/module.h>
++#include <linux/mount.h>
++#include <linux/page-flags.h>
++#include <linux/writeback.h>
++#include <linux/statfs.h>
++#endif
++#include <linux/smp.h>
++#include <linux/smp_lock.h>
++#include <linux/file.h>
++#include <linux/slab.h>
++#include <linux/vmalloc.h>
++#include <linux/poll.h>
++#include <linux/list.h>
++#include <linux/init.h>
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20)
++#include <linux/xattr.h>
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#include <linux/security.h>
++#endif
++
++#include <linux/swap.h>
++
++#include <asm/system.h>
++/* #include <asm/segment.h> */
++#include <asm/mman.h>
++#include <linux/seq_file.h>
++
++/*
++ * MACROS:
++ */
++
++/* those mapped to ATTR_* were copied from linux/fs.h */
++#define FA_MODE		ATTR_MODE
++#define FA_UID		ATTR_UID
++#define FA_GID		ATTR_GID
++#define FA_SIZE		ATTR_SIZE
++#define FA_ATIME	ATTR_ATIME
++#define FA_MTIME	ATTR_MTIME
++#define FA_CTIME	ATTR_CTIME
++#define FA_ATIME_SET	ATTR_ATIME_SET
++#define FA_MTIME_SET	ATTR_MTIME_SET
++#define FA_FORCE	ATTR_FORCE
++#define FA_ATTR_FLAGS	ATTR_ATTR_FLAG
++
++/* must be greater than all other ATTR_* flags! */
++#define FA_NLINK	2048
++#define FA_BLKSIZE	4096
++#define FA_BLOCKS	8192
++#define FA_TIMES	(FA_ATIME|FA_MTIME|FA_CTIME)
++#define FA_ALL		0
++
++/* macros to manage changes between kernels */
++#define INODE_DATA(i)	(&(i)->i_data)
++
++#define MIN(x,y) ((x < y) ? (x) : (y))
++#define MAX(x,y) ((x > y) ? (x) : (y))
++#define MAXPATHLEN PATH_MAX
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,5)
++# define lookup_one_len(a,b,c) lookup_one(a,b)
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,4,5) */
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,8)
++# define generic_file_llseek default_llseek
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,4,8) */
++
++#ifndef SEEK_SET
++# define SEEK_SET 0
++#endif /* not SEEK_SET */
++
++#ifndef SEEK_CUR
++# define SEEK_CUR 1
++#endif /* not SEEK_CUR */
++
++#ifndef SEEK_END
++# define SEEK_END 2
++#endif /* not SEEK_END */
++
++#ifndef DEFAULT_POLLMASK
++# define DEFAULT_POLLMASK (POLLIN | POLLOUT | POLLRDNORM | POLLWRNORM)
++#endif /* not DEFAULT_POLLMASK */
++
++/* XXX: fix this so fistgen generates kfree() code directly */
++#define kfree_s(a,b) kfree(a)
++
++/*
++ * TYPEDEFS:
++ */
++typedef struct dentry dentry_t;
++typedef struct file file_t;
++typedef struct inode inode_t;
++typedef inode_t vnode_t;
++typedef struct page page_t;
++typedef struct qstr qstr_t;
++typedef struct super_block super_block_t;
++typedef super_block_t vfs_t;
++typedef struct vm_area_struct vm_area_t;
++
++
++/*
++ * EXTERNALS:
++ */
++
++#define FPPF(str,page) printk("PPF %s 0x%x/%d: Lck:%d Err:%d Ref:%d Upd:%d Other::%d:%d:%d:%d:\n", \
++		str, \
++		(int) page, \
++		(int) page->index, \
++		(PageLocked(page) ? 1 : 0), \
++		(PageError(page) ? 1 : 0), \
++		(PageReferenced(page) ? 1 : 0), \
++		(Page_Uptodate(page) ? 1 : 0), \
++		(PageDecrAfter(page) ? 1 : 0), \
++		(PageSlab(page) ? 1 : 0), \
++		(PageSwapCache(page) ? 1 : 0), \
++		(PageReserved(page) ? 1 : 0) \
++		)
++#define EZKDBG printk("EZK %s:%d:%s\n",__FILE__,__LINE__,__FUNCTION__)
++#if 0
++# define EZKDBG1 printk("EZK %s:%d\n",__FILE__,__LINE__)
++#else
++# define EZKDBG1
++#endif
++
++extern int fist_get_debug_value(void);
++extern int fist_set_debug_value(int val);
++#if 0 /* mini_fo doesn't need these */
++extern void fist_dprint_internal(int level, char *str,...);
++extern void fist_print_dentry(char *str, const dentry_t *dentry);
++extern void fist_print_inode(char *str, const inode_t *inode);
++extern void fist_print_file(char *str, const file_t *file);
++extern void fist_print_buffer_flags(char *str, struct buffer_head *buffer);
++extern void fist_print_page_flags(char *str, page_t *page);
++extern void fist_print_page_bytes(char *str, page_t *page);
++extern void fist_print_pte_flags(char *str, const page_t *page);
++extern void fist_checkinode(inode_t *inode, char *msg);
++extern void fist_print_sb(char *str, const super_block_t *sb);
++
++/* §$% by mk: special debug functions */
++extern void fist_mk_print_dentry(char *str, const dentry_t *dentry);
++extern void fist_mk_print_inode(char *str, const inode_t *inode);
++
++extern char *add_indent(void);
++extern char *del_indent(void);
++#endif/* mini_fo doesn't need these */
++
++
++#define STATIC
++#define ASSERT(EX)	\
++do {	\
++    if (!(EX)) {	\
++	printk(KERN_CRIT "ASSERTION FAILED: %s at %s:%d (%s)\n", #EX,	\
++	       __FILE__, __LINE__, __FUNCTION__);	\
++	(*((char *)0))=0;	\
++    }	\
++} while (0)
++/* same ASSERT, but tell me who was the caller of the function */
++#define ASSERT2(EX)	\
++do {	\
++    if (!(EX)) {	\
++	printk(KERN_CRIT "ASSERTION FAILED (caller): %s at %s:%d (%s)\n", #EX,	\
++	       file, line, func);	\
++	(*((char *)0))=0;	\
++    }	\
++} while (0)
++
++#if 0 /* mini_fo doesn't need these */
++#define dprintk(format, args...) printk(KERN_DEBUG format, ##args)
++#define fist_dprint(level, str, args...) fist_dprint_internal(level, KERN_DEBUG str, ## args)
++#define print_entry_location() fist_dprint(4, "%sIN:  %s %s:%d\n", add_indent(), __FUNCTION__, __FILE__, __LINE__)
++#define print_exit_location() fist_dprint(4, "%s OUT: %s %s:%d\n", del_indent(), __FUNCTION__, __FILE__, __LINE__)
++#define print_exit_status(status) fist_dprint(4, "%s OUT: %s %s:%d, STATUS: %d\n", del_indent(), __FUNCTION__, __FILE__, __LINE__, status)
++#define print_exit_pointer(status) \
++do { \
++  if (IS_ERR(status)) \
++    fist_dprint(4, "%s OUT: %s %s:%d, RESULT: %ld\n", del_indent(), __FUNCTION__, __FILE__, __LINE__, PTR_ERR(status)); \
++  else \
++    fist_dprint(4, "%s OUT: %s %s:%d, RESULT: 0x%x\n", del_indent(), __FUNCTION__, __FILE__, __LINE__, PTR_ERR(status)); \
++} while (0)
++#endif/* mini_fo doesn't need these */
++
++#endif /* __KERNEL__ */
++
++
++/*
++ * DEFINITIONS FOR USER AND KERNEL CODE:
++ * (Note: ioctl numbers 1--9 are reserved for fistgen, the rest
++ *  are auto-generated automatically based on the user's .fist file.)
++ */
++# define FIST_IOCTL_GET_DEBUG_VALUE	_IOR(0x15, 1, int)
++# define FIST_IOCTL_SET_DEBUG_VALUE	_IOW(0x15, 2, int)
++
++#endif /* not __FIST_H_ */
+--- /dev/null
++++ b/fs/mini_fo/inode.c
+@@ -0,0 +1,1564 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_create(inode_t *dir, dentry_t *dentry, int mode, struct nameidata *nd)
++#else
++mini_fo_create(inode_t *dir, dentry_t *dentry, int mode)
++#endif
++{
++	int err = 0;
++
++	check_mini_fo_dentry(dentry);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	err = create_sto_reg_file(dentry, mode, nd);
++#else
++	err = create_sto_reg_file(dentry, mode);
++#endif
++	check_mini_fo_dentry(dentry);
++	return err;
++}
++
++
++STATIC dentry_t *
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_lookup(inode_t *dir, dentry_t *dentry, struct nameidata* nd)
++#else
++mini_fo_lookup(inode_t *dir, dentry_t *dentry)
++#endif
++{
++	int err = 0;
++	dentry_t *hidden_dir_dentry;
++	dentry_t *hidden_dentry = NULL;
++
++	dentry_t *hidden_sto_dir_dentry;
++	dentry_t *hidden_sto_dentry = NULL;
++
++	/* whiteout flag */
++	int del_flag = 0;
++	char *bpath = NULL;
++
++	const char *name;
++	unsigned int namelen;
++
++	/* Don't allow lookups of META-files */
++	namelen = strlen(META_FILENAME);
++	if(namelen == dentry->d_name.len) {
++		if(!strncmp(dentry->d_name.name, META_FILENAME, namelen)) {
++			err = -ENOENT;
++			goto out;
++		}
++	}
++
++	hidden_dir_dentry = dtohd(dentry->d_parent);
++	hidden_sto_dir_dentry = dtohd2(dentry->d_parent);
++
++	name = dentry->d_name.name;
++	namelen = dentry->d_name.len;
++
++	/* must initialize dentry operations */
++	dentry->d_op = &mini_fo_dops;
++
++	/* setup the del_flag */
++	del_flag = __meta_check_d_entry(dir, name, namelen);
++	bpath = __meta_check_r_entry(dir, name, namelen);
++
++	/* perform the lookups of base and storage files:
++	 *
++	 * This caused some serious trouble, as a lookup_one_len passing
++	 * a negative dentry oopses. Solution is to only do the lookup
++	 * if the dentry is positive, else we set it to NULL
++	 * More trouble, who said a *_dir_dentry can't be NULL?
++	 */
++	if(bpath) {
++		/* Cross-Interposing (C), yeah! */
++		hidden_dentry = bpath_walk(dir->i_sb, bpath);
++		if(!hidden_dentry || !hidden_dentry->d_inode) {
++			printk(KERN_CRIT "mini_fo_lookup: bpath_walk failed.\n");
++			err= -EINVAL;
++			goto out;
++		}
++
++		/* this can be set up safely without fear of spaghetti
++		 * interposing as it is only used for copying times */
++		hidden_dir_dentry = hidden_dentry->d_parent;
++		kfree(bpath);
++	}
++	else if(hidden_dir_dentry && hidden_dir_dentry->d_inode)
++		hidden_dentry =
++			lookup_one_len(name, hidden_dir_dentry, namelen);
++	else
++		hidden_dentry = NULL;
++
++	if(hidden_sto_dir_dentry && hidden_sto_dir_dentry->d_inode)
++		hidden_sto_dentry =
++			lookup_one_len(name, hidden_sto_dir_dentry, namelen);
++	else
++		hidden_sto_dentry =  NULL;
++
++	/* catch error in lookup */
++	if (IS_ERR(hidden_dentry) || IS_ERR(hidden_sto_dentry)) {
++		/* mk: we need to call dput on the dentry, whose
++		 * lookup_one_len operation failed, in order to avoid
++		 * unmount trouble.
++		 */
++		if(IS_ERR(hidden_dentry)) {
++			printk(KERN_CRIT "mini_fo_lookup: ERR from base dentry, lookup failed.\n");
++			err = PTR_ERR(hidden_dentry);
++		} else {
++			dput(hidden_dentry);
++		}
++		if(IS_ERR(hidden_sto_dentry)) {
++			printk(KERN_CRIT "mini_fo_lookup: ERR from storage dentry, lookup failed.\n");
++			err = PTR_ERR(hidden_sto_dentry);
++		} else {
++			dput(hidden_sto_dentry);
++		}
++		goto out;
++	}
++
++	/* allocate dentry private data */
++	__dtopd(dentry) = (struct mini_fo_dentry_info *)
++		kmalloc(sizeof(struct mini_fo_dentry_info), GFP_KERNEL);
++
++	if (!dtopd(dentry)) {
++		err = -ENOMEM;
++		goto out_dput;
++	}
++
++	/* check for different states of the mini_fo file to be looked up. */
++
++	/* state 1, file has been modified */
++	if(hidden_dentry && hidden_sto_dentry &&
++	   hidden_dentry->d_inode && hidden_sto_dentry->d_inode && !del_flag) {
++
++		/* update parent directory's atime */
++		fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode);
++
++		dtopd(dentry)->state = MODIFIED;
++		dtohd(dentry) = hidden_dentry;
++		dtohd2(dentry) = hidden_sto_dentry;
++
++		err = mini_fo_tri_interpose(hidden_dentry,
++					    hidden_sto_dentry,
++					    dentry, dir->i_sb, 1);
++		if (err) {
++			printk(KERN_CRIT "mini_fo_lookup: error interposing (state1).\n");
++			goto out_free;
++		}
++		goto out;
++	}
++	/* state 2, file is unmodified */
++	if(hidden_dentry && hidden_dentry->d_inode && !del_flag) {
++
++		fist_copy_attr_atime(dir, hidden_dir_dentry->d_inode);
++
++		dtopd(dentry)->state = UNMODIFIED;
++		dtohd(dentry) = hidden_dentry;
++		dtohd2(dentry) = hidden_sto_dentry; /* could be negative */
++
++		err = mini_fo_tri_interpose(hidden_dentry,
++					    hidden_sto_dentry,
++					    dentry, dir->i_sb, 1);
++		if (err) {
++			printk(KERN_CRIT "mini_fo_lookup: error interposing (state2).\n");
++			goto out_free;
++		}
++		goto out;
++	}
++	/* state 3, file has been newly created */
++	if(hidden_sto_dentry && hidden_sto_dentry->d_inode && !del_flag) {
++
++		fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode);
++		dtopd(dentry)->state = CREATED;
++		dtohd(dentry) = hidden_dentry; /* could be negative */
++		dtohd2(dentry) = hidden_sto_dentry;
++
++		err = mini_fo_tri_interpose(hidden_dentry,
++					    hidden_sto_dentry,
++					    dentry, dir->i_sb, 1);
++		if (err) {
++			printk(KERN_CRIT "mini_fo_lookup: error interposing (state3).\n");
++			goto out_free;
++		}
++		goto out;
++	}
++
++	/* state 4, file has deleted and created again. */
++	if(hidden_dentry && hidden_sto_dentry &&
++	   hidden_dentry->d_inode &&
++	   hidden_sto_dentry->d_inode && del_flag) {
++
++		fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode);
++		dtopd(dentry)->state = DEL_REWRITTEN;
++		dtohd(dentry) = NULL;
++		dtohd2(dentry) = hidden_sto_dentry;
++
++		err = mini_fo_tri_interpose(NULL,
++					    hidden_sto_dentry,
++					    dentry, dir->i_sb, 1);
++		if (err) {
++			printk(KERN_CRIT "mini_fo_lookup: error interposing (state4).\n");
++			goto out_free;
++		}
++		/* We will never need this dentry again, as the file has been
++		 * deleted from base */
++		dput(hidden_dentry);
++		goto out;
++	}
++	/* state 5, file has been deleted in base */
++	if(hidden_dentry && hidden_sto_dentry &&
++	   hidden_dentry->d_inode &&
++	   !hidden_sto_dentry->d_inode && del_flag) {
++
++		/* check which parents atime we need for updating */
++		if(hidden_sto_dir_dentry->d_inode)
++			fist_copy_attr_atime(dir,
++					     hidden_sto_dir_dentry->d_inode);
++		else
++			fist_copy_attr_atime(dir,
++					     hidden_dir_dentry->d_inode);
++
++		dtopd(dentry)->state = DELETED;
++		dtohd(dentry) = NULL;
++		dtohd2(dentry) = hidden_sto_dentry;
++
++		/* add negative dentry to dcache to speed up lookups */
++		d_add(dentry, NULL);
++		dput(hidden_dentry);
++		goto out;
++	}
++	/* state 6, file does not exist */
++	if(((hidden_dentry && !hidden_dentry->d_inode) ||
++	    (hidden_sto_dentry && !hidden_sto_dentry->d_inode)) && !del_flag)
++		{
++			/* check which parents atime we need for updating */
++			if(hidden_sto_dir_dentry && hidden_sto_dir_dentry->d_inode)
++				fist_copy_attr_atime(dir, hidden_sto_dir_dentry->d_inode);
++			else
++				fist_copy_attr_atime(dir, hidden_dir_dentry->d_inode);
++
++			dtopd(dentry)->state = NON_EXISTANT;
++			dtohd(dentry) = hidden_dentry;
++			dtohd2(dentry) = hidden_sto_dentry;
++			d_add(dentry, NULL);
++			goto out;
++		}
++
++	/* if we get to here, were in an invalid state. bad. */
++	printk(KERN_CRIT "mini_fo_lookup: ERROR, meta data corruption detected.\n");
++
++	/* end state checking */
++ out_free:
++	d_drop(dentry);		/* so that our bad dentry will get destroyed */
++	kfree(dtopd(dentry));
++	__dtopd(dentry) = NULL;	/* be safe */
++
++ out_dput:
++	if(hidden_dentry)
++		dput(hidden_dentry);
++	if(hidden_sto_dentry)
++		dput(hidden_sto_dentry); /* drops usage count and marks for release */
++
++ out:
++	/* initalize wol if file exists and is directory */
++	if(dentry->d_inode) {
++		if(S_ISDIR(dentry->d_inode->i_mode)) {
++			itopd(dentry->d_inode)->deleted_list_size = -1;
++			itopd(dentry->d_inode)->renamed_list_size = -1;
++			meta_build_lists(dentry);
++		}
++	}
++	return ERR_PTR(err);
++}
++
++
++STATIC int
++mini_fo_link(dentry_t *old_dentry, inode_t *dir, dentry_t *new_dentry)
++{
++	int err;
++	dentry_t *hidden_old_dentry;
++	dentry_t *hidden_new_dentry;
++	dentry_t *hidden_dir_dentry;
++
++
++	check_mini_fo_dentry(old_dentry);
++	check_mini_fo_dentry(new_dentry);
++	check_mini_fo_inode(dir);
++
++	/* no links to directorys and existing targets target allowed */
++	if(S_ISDIR(old_dentry->d_inode->i_mode) ||
++	   is_mini_fo_existant(new_dentry)) {
++		err = -EPERM;
++		goto out;
++	}
++
++	/* bring it directly from unmod to del_rew */
++	if(dtost(old_dentry) == UNMODIFIED) {
++		err = nondir_unmod_to_mod(old_dentry, 1);
++		if(err) {
++			err = -EINVAL;
++			goto out;
++		}
++		err = meta_add_d_entry(old_dentry->d_parent,
++				       old_dentry->d_name.name,
++				       old_dentry->d_name.len);
++		if(err) {
++			err = -EINVAL;
++			goto out;
++		}
++		dput(dtohd(old_dentry));
++		dtohd(old_dentry) = NULL;
++		dtost(old_dentry) = DEL_REWRITTEN;
++	}
++
++	err = get_neg_sto_dentry(new_dentry);
++	if(err) {
++		err = -EINVAL;
++		goto out;
++	}
++
++	hidden_old_dentry = dtohd2(old_dentry);
++	hidden_new_dentry = dtohd2(new_dentry);
++
++	dget(hidden_old_dentry);
++	dget(hidden_new_dentry);
++
++	/* was: hidden_dir_dentry = lock_parent(hidden_new_dentry); */
++	hidden_dir_dentry = dget(hidden_new_dentry->d_parent);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = vfs_link(hidden_old_dentry,
++		       hidden_dir_dentry->d_inode,
++		       hidden_new_dentry);
++	if (err || !hidden_new_dentry->d_inode)
++		goto out_lock;
++
++	dtost(new_dentry) = CREATED;
++ 	err = mini_fo_tri_interpose(NULL, hidden_new_dentry, new_dentry, dir->i_sb, 0);
++	if (err)
++		goto out_lock;
++
++	fist_copy_attr_timesizes(dir, hidden_new_dentry->d_inode);
++	/* propagate number of hard-links */
++	old_dentry->d_inode->i_nlink = itohi2(old_dentry->d_inode)->i_nlink;
++
++ out_lock:
++	/* was: unlock_dir(hidden_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_dir_dentry);
++
++	dput(hidden_new_dentry);
++	dput(hidden_old_dentry);
++	if (!new_dentry->d_inode)
++		d_drop(new_dentry);
++
++ out:
++	return err;
++}
++
++
++STATIC int
++mini_fo_unlink(inode_t *dir, dentry_t *dentry)
++{
++	int err = 0;
++
++	dget(dentry);
++	if(dtopd(dentry)->state == MODIFIED) {
++		err = nondir_mod_to_del(dentry);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == UNMODIFIED) {
++		err = nondir_unmod_to_del(dentry);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == CREATED) {
++		err = nondir_creat_to_del(dentry);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == DEL_REWRITTEN) {
++		err = nondir_del_rew_to_del(dentry);
++		goto out;
++	}
++
++	printk(KERN_CRIT "mini_fo_unlink: ERROR, invalid state detected.\n");
++
++ out:
++	fist_copy_attr_times(dir, itohi2(dentry->d_parent->d_inode));
++
++	if(!err) {
++		/* is this causing my pain? d_delete(dentry); */
++		d_drop(dentry);
++	}
++
++	dput(dentry);
++	return err;
++}
++
++
++STATIC int
++mini_fo_symlink(inode_t *dir, dentry_t *dentry, const char *symname)
++{
++	int err=0;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++        umode_t mode;
++#endif
++
++	/* Fail if the symlink file exists */
++	if(!(dtost(dentry) == DELETED ||
++	     dtost(dentry) == NON_EXISTANT)) {
++		err = -EEXIST;
++		goto out;
++	}
++
++	err = get_neg_sto_dentry(dentry);
++	if(err) {
++		err = -EINVAL;
++		goto out;
++	}
++	hidden_sto_dentry = dtohd2(dentry);
++
++	dget(hidden_sto_dentry);
++	/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	mode = S_IALLUGO;
++	err = vfs_symlink(hidden_sto_dir_dentry->d_inode,
++			  hidden_sto_dentry, symname, mode);
++#else
++	err = vfs_symlink(hidden_sto_dir_dentry->d_inode,
++			  hidden_sto_dentry,
++			  symname);
++#endif
++	if (err || !hidden_sto_dentry->d_inode)
++                goto out_lock;
++
++        if(dtost(dentry) == DELETED) {
++                dtost(dentry) = DEL_REWRITTEN;
++                err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0);
++                if(err)
++                        goto out_lock;
++        } else if(dtost(dentry) == NON_EXISTANT) {
++                dtost(dentry) = CREATED;
++                err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0);
++                if(err)
++                        goto out_lock;
++        }
++	fist_copy_attr_timesizes(dir, hidden_sto_dir_dentry->d_inode);
++
++ out_lock:
++        /* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++
++        dput(hidden_sto_dentry);
++        if (!dentry->d_inode)
++                d_drop(dentry);
++ out:
++        return err;
++}
++
++STATIC int
++mini_fo_mkdir(inode_t *dir, dentry_t *dentry, int mode)
++{
++	int err;
++
++	err = create_sto_dir(dentry, mode);
++
++	check_mini_fo_dentry(dentry);
++
++	return err;
++}
++
++
++STATIC int
++mini_fo_rmdir(inode_t *dir, dentry_t *dentry)
++{
++	int err = 0;
++
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++	dentry_t *meta_dentry;
++	inode_t *hidden_sto_dir = NULL;
++
++	check_mini_fo_dentry(dentry);
++	check_mini_fo_inode(dir);
++
++	dget(dentry);
++	if(dtopd(dentry)->state == MODIFIED) {
++		/* XXX: disabled, because it does not bother to check files on
++		 * the original filesystem - just a hack, but better than simply
++		 * removing it without testing */
++		err = -EINVAL;
++		goto out;
++
++		hidden_sto_dir = itohi2(dir);
++		hidden_sto_dentry = dtohd2(dentry);
++
++		/* was:hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++		hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++		/* Delete an old WOL file contained in the storage dir */
++		meta_dentry = lookup_one_len(META_FILENAME,
++					     hidden_sto_dentry,
++					     strlen(META_FILENAME));
++		if(meta_dentry->d_inode) {
++			err = vfs_unlink(hidden_sto_dentry->d_inode, meta_dentry);
++			dput(meta_dentry);
++			if(!err)
++				d_delete(meta_dentry);
++		}
++
++		err = vfs_rmdir(hidden_sto_dir, hidden_sto_dentry);
++		dput(hidden_sto_dentry);
++		if(!err)
++			d_delete(hidden_sto_dentry);
++
++		/* propagate number of hard-links */
++		dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++
++		dput(dtohd(dentry));
++
++		dtohd(dentry) = NULL;
++		dtopd(dentry)->state = DELETED;
++
++		/* carefull with R files */
++		if( __meta_is_r_entry(dir,
++				      dentry->d_name.name,
++				      dentry->d_name.len) == 1) {
++			err = meta_remove_r_entry(dentry->d_parent,
++						  dentry->d_name.name,
++						  dentry->d_name.len);
++			if(err) {
++				printk(KERN_CRIT "mini_fo: rmdir: meta_remove_r_entry failed.\n");
++				goto out;
++			}
++		}
++		else {
++			/* ok, add deleted file to META */
++			meta_add_d_entry(dentry->d_parent,
++					 dentry->d_name.name,
++					 dentry->d_name.len);
++		}
++		/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++		dput(hidden_sto_dir_dentry);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == UNMODIFIED) {
++		/* XXX: simply adding it to the delete list here is fscking dangerous!
++		 * as a temporary hack, i will disable rmdir on unmodified directories
++		 * for now.
++		 */
++		err = -EINVAL;
++		goto out;
++
++		err = get_neg_sto_dentry(dentry);
++		if(err) {
++			err = -EINVAL;
++			goto out;
++		}
++
++		/* dput base dentry, this will relase the inode and free the
++		 * dentry, as we will never need it again. */
++		dput(dtohd(dentry));
++		dtohd(dentry) = NULL;
++		dtopd(dentry)->state = DELETED;
++
++		/* add deleted file to META-file */
++		meta_add_d_entry(dentry->d_parent,
++				 dentry->d_name.name,
++				 dentry->d_name.len);
++		goto out;
++	}
++	else if(dtopd(dentry)->state == CREATED) {
++		hidden_sto_dir = itohi2(dir);
++		hidden_sto_dentry = dtohd2(dentry);
++
++		/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry);*/
++		hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++		/* Delete an old WOL file contained in the storage dir */
++		meta_dentry = lookup_one_len(META_FILENAME,
++					     hidden_sto_dentry,
++					     strlen(META_FILENAME));
++		if(meta_dentry->d_inode) {
++			/* is this necessary? dget(meta_dentry); */
++			err = vfs_unlink(hidden_sto_dentry->d_inode,
++					 meta_dentry);
++			dput(meta_dentry);
++			if(!err)
++				d_delete(meta_dentry);
++		}
++
++		err = vfs_rmdir(hidden_sto_dir, hidden_sto_dentry);
++		dput(hidden_sto_dentry);
++		if(!err)
++			d_delete(hidden_sto_dentry);
++
++		/* propagate number of hard-links */
++		dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++		dtopd(dentry)->state = NON_EXISTANT;
++
++		/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++		dput(hidden_sto_dir_dentry);
++
++		goto out;
++	}
++	else if(dtopd(dentry)->state == DEL_REWRITTEN) {
++		hidden_sto_dir = itohi2(dir);
++		hidden_sto_dentry = dtohd2(dentry);
++
++		/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry);*/
++		hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++		/* Delete an old WOL file contained in the storage dir */
++		meta_dentry = lookup_one_len(META_FILENAME,
++					     hidden_sto_dentry,
++					     strlen(META_FILENAME));
++		if(meta_dentry->d_inode) {
++			/* is this necessary? dget(meta_dentry); */
++			err = vfs_unlink(hidden_sto_dentry->d_inode,
++					 meta_dentry);
++			dput(meta_dentry);
++			if(!err)
++				d_delete(meta_dentry);
++		}
++
++		err = vfs_rmdir(hidden_sto_dir, hidden_sto_dentry);
++		dput(hidden_sto_dentry);
++		if(!err)
++			d_delete(hidden_sto_dentry);
++
++		/* propagate number of hard-links */
++		dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++		dtopd(dentry)->state = DELETED;
++		/* was: unlock_dir(hidden_sto_dir_dentry); */
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++		dput(hidden_sto_dir_dentry);
++		goto out;
++	}
++
++	printk(KERN_CRIT "mini_fo_rmdir: ERROR, invalid state detected.\n");
++
++ out:
++	if(!err) {
++		d_drop(dentry);
++	}
++
++	fist_copy_attr_times(dir, itohi2(dentry->d_parent->d_inode));
++	dput(dentry);
++
++	return err;
++}
++
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_mknod(inode_t *dir, dentry_t *dentry, int mode, dev_t dev)
++#else
++mini_fo_mknod(inode_t *dir, dentry_t *dentry, int mode, int dev)
++#endif
++{
++	int err = 0;
++
++	check_mini_fo_dentry(dentry);
++
++	err = create_sto_nod(dentry, mode, dev);
++	if(err) {
++		printk(KERN_CRIT "mini_fo_mknod: creating sto nod failed.\n");
++		err = -EINVAL;
++	}
++
++	check_mini_fo_dentry(dentry);
++	return err;
++}
++
++
++STATIC int
++mini_fo_rename(inode_t *old_dir, dentry_t *old_dentry,
++	       inode_t *new_dir, dentry_t *new_dentry)
++{
++	/* dispatch */
++	if(S_ISDIR(old_dentry->d_inode->i_mode))
++		return rename_directory(old_dir, old_dentry, new_dir, new_dentry);
++	return rename_nondir(old_dir, old_dentry, new_dir, new_dentry);
++
++}
++
++int rename_directory(inode_t *old_dir, dentry_t *old_dentry,
++		     inode_t *new_dir, dentry_t *new_dentry)
++{
++	int err, bpath_len;
++	char *bpath;
++
++	dentry_t *hidden_old_dentry;
++	dentry_t *hidden_new_dentry;
++	dentry_t *hidden_old_dir_dentry;
++	dentry_t *hidden_new_dir_dentry;
++
++	err = 0;
++	bpath = NULL;
++	bpath_len = 0;
++
++	/* this is a test, chuck out if it works */
++	if(!(dtopd(new_dentry)->state == DELETED ||
++	     dtopd(new_dentry)->state == NON_EXISTANT)) {
++		printk(KERN_CRIT "mini_fo: rename_directory: \
++                                  uh, ah, new_dentry not negative.\n");
++		/* return -1; */
++	}
++
++	/* state = UNMODIFIED */
++	if(dtopd(old_dentry)->state == UNMODIFIED) {
++		err = dir_unmod_to_mod(old_dentry);
++		if (err)
++			goto out;
++	}
++
++	/* state = MODIFIED */
++	if(dtopd(old_dentry)->state == MODIFIED) {
++		bpath = meta_check_r_entry(old_dentry->d_parent,
++					   old_dentry->d_name.name,
++					   old_dentry->d_name.len);
++		if(bpath) {
++			err = meta_remove_r_entry(old_dentry->d_parent,
++						  old_dentry->d_name.name,
++						  old_dentry->d_name.len);
++			if(err) {
++				printk(KERN_CRIT "mini_fo: rename_directory:\
++                                                   meta_remove_r_entry \
++                                                  failed.\n");
++				goto out;
++			}
++			err = meta_add_r_entry(new_dentry->d_parent,
++					       bpath,
++					       strlen(bpath),
++					       new_dentry->d_name.name,
++					       new_dentry->d_name.len);
++			kfree(bpath);
++		}
++		else {/* wol it */
++			err = meta_add_d_entry(old_dentry->d_parent,
++					       old_dentry->d_name.name,
++					       old_dentry->d_name.len);
++			if (err)
++				goto out;
++			/* put it on rename list */
++			err = get_mini_fo_bpath(old_dentry,
++						&bpath,
++						&bpath_len);
++			if (err)
++				goto out;
++			err = meta_add_r_entry(new_dentry->d_parent,
++					       bpath, bpath_len,
++					       new_dentry->d_name.name,
++					       new_dentry->d_name.len);
++			if (err)
++				goto out;
++		}
++		/* no state change, MODIFIED stays MODIFIED */
++	}
++	/* state = CREATED */
++	if(dtopd(old_dentry)->state == CREATED ||
++	   dtopd(old_dentry)->state == DEL_REWRITTEN) {
++		if(dtohd(old_dentry))
++			dput(dtohd(old_dentry));
++
++		if(dtopd(new_dentry)->state == DELETED) {
++			dtopd(old_dentry)->state = DEL_REWRITTEN;
++			dtohd(old_dentry) = NULL;
++		}
++		else if(dtopd(new_dentry)->state == NON_EXISTANT) {
++			dtopd(old_dentry)->state = CREATED;
++			/* steal new dentry's neg. base dentry */
++			dtohd(old_dentry) = dtohd(new_dentry);
++			dtohd(new_dentry) = NULL;
++		}
++	}
++	if(dtopd(new_dentry)->state == UNMODIFIED ||
++	   dtopd(new_dentry)->state == NON_EXISTANT) {
++		err = get_neg_sto_dentry(new_dentry);
++		if(err)
++			goto out;
++	}
++
++	/* now move sto file */
++	hidden_old_dentry = dtohd2(old_dentry);
++	hidden_new_dentry = dtohd2(new_dentry);
++
++	dget(hidden_old_dentry);
++	dget(hidden_new_dentry);
++
++	hidden_old_dir_dentry = dget(hidden_old_dentry->d_parent);
++	hidden_new_dir_dentry = dget(hidden_new_dentry->d_parent);
++	double_lock(hidden_old_dir_dentry, hidden_new_dir_dentry);
++
++	err = vfs_rename(hidden_old_dir_dentry->d_inode, hidden_old_dentry,
++			 hidden_new_dir_dentry->d_inode, hidden_new_dentry);
++	if(err)
++		goto out_lock;
++
++	fist_copy_attr_all(new_dir, hidden_new_dir_dentry->d_inode);
++	if (new_dir != old_dir)
++		fist_copy_attr_all(old_dir,
++				   hidden_old_dir_dentry->d_inode);
++
++ out_lock:
++	/* double_unlock will dput the new/old parent dentries
++	 * whose refcnts were incremented via get_parent above. */
++	double_unlock(hidden_old_dir_dentry, hidden_new_dir_dentry);
++	dput(hidden_new_dentry);
++	dput(hidden_old_dentry);
++
++ out:
++	return err;
++}
++
++int rename_nondir(inode_t *old_dir, dentry_t *old_dentry,
++		  inode_t *new_dir, dentry_t *new_dentry)
++{
++	int err=0;
++
++	check_mini_fo_dentry(old_dentry);
++	check_mini_fo_dentry(new_dentry);
++	check_mini_fo_inode(old_dir);
++	check_mini_fo_inode(new_dir);
++
++	/* state: UNMODIFIED */
++	if(dtost(old_dentry) == UNMODIFIED) {
++		err = nondir_unmod_to_mod(old_dentry, 1);
++		if(err) {
++			err = -EINVAL;
++			goto out;
++		}
++	}
++
++	/* the easy states */
++	if(exists_in_storage(old_dentry)) {
++
++		dentry_t *hidden_old_dentry;
++		dentry_t *hidden_new_dentry;
++		dentry_t *hidden_old_dir_dentry;
++		dentry_t *hidden_new_dir_dentry;
++
++		/* if old file is MODIFIED, add it to the deleted_list */
++		if(dtopd(old_dentry)->state == MODIFIED) {
++			meta_add_d_entry(old_dentry->d_parent,
++					 old_dentry->d_name.name,
++					 old_dentry->d_name.len);
++
++			dput(dtohd(old_dentry));
++		}
++		/* if old file is CREATED, we only release the base dentry */
++		if(dtopd(old_dentry)->state == CREATED) {
++			if(dtohd(old_dentry))
++				dput(dtohd(old_dentry));
++		}
++
++		/* now setup the new states (depends on new_dentry state) */
++		/* new dentry state =  MODIFIED */
++		if(dtopd(new_dentry)->state == MODIFIED) {
++			meta_add_d_entry(new_dentry->d_parent,
++					 new_dentry->d_name.name,
++					 new_dentry->d_name.len);
++
++			/* new dentry will be d_put'ed later by the vfs
++			 * so don't do it here
++			 * dput(dtohd(new_dentry));
++			 */
++			dtohd(old_dentry) = NULL;
++			dtopd(old_dentry)->state = DEL_REWRITTEN;
++		}
++		/* new dentry state =  UNMODIFIED */
++		else if(dtopd(new_dentry)->state == UNMODIFIED) {
++			if(get_neg_sto_dentry(new_dentry))
++				return -EINVAL;
++
++			meta_add_d_entry(new_dentry->d_parent,
++					 new_dentry->d_name.name,
++					 new_dentry->d_name.len);
++
++			/* is this right??? */
++			/*dput(dtohd(new_dentry));*/
++			dtohd(old_dentry) = NULL;
++			dtopd(old_dentry)->state = DEL_REWRITTEN;
++		}
++		/* new dentry state =  CREATED */
++		else if(dtopd(new_dentry)->state == CREATED) {
++			/* we keep the neg. base dentry (if exists) */
++			dtohd(old_dentry) = dtohd(new_dentry);
++			/* ...and set it to Null, or we'll get
++			 * dcache.c:345 if it gets dput twice... */
++			dtohd(new_dentry) = NULL;
++			dtopd(old_dentry)->state = CREATED;
++		}
++		/* new dentry state =  NON_EXISTANT */
++		else if(dtopd(new_dentry)->state == NON_EXISTANT) {
++			if(get_neg_sto_dentry(new_dentry))
++				return -EINVAL;
++
++			/* we keep the neg. base dentry (if exists) */
++			dtohd(old_dentry) = dtohd(new_dentry);
++			/* ...and set it to Null, or we'll get
++			 * Dr. dcache.c:345 if it gets dput twice... */
++			dtohd(new_dentry) = NULL;
++			dtopd(old_dentry)->state = CREATED;
++		}
++		/* new dentry state =  DEL_REWRITTEN or DELETED */
++		else if(dtopd(new_dentry)->state == DEL_REWRITTEN ||
++			dtopd(new_dentry)->state == DELETED) {
++			dtohd(old_dentry) = NULL;
++			dtopd(old_dentry)->state = DEL_REWRITTEN;
++		}
++		else { /* not possible, uhh, ahh */
++			printk(KERN_CRIT
++			       "mini_fo: rename_reg_file: invalid state detected [1].\n");
++			return -1;
++		}
++
++		/* now we definitely have a sto file */
++		hidden_old_dentry = dtohd2(old_dentry);
++		hidden_new_dentry = dtohd2(new_dentry);
++
++		dget(hidden_old_dentry);
++		dget(hidden_new_dentry);
++
++		hidden_old_dir_dentry = dget(hidden_old_dentry->d_parent);
++		hidden_new_dir_dentry = dget(hidden_new_dentry->d_parent);
++		double_lock(hidden_old_dir_dentry, hidden_new_dir_dentry);
++
++		err = vfs_rename(hidden_old_dir_dentry->d_inode,
++				 hidden_old_dentry,
++				 hidden_new_dir_dentry->d_inode,
++				 hidden_new_dentry);
++		if(err)
++			goto out_lock;
++
++		fist_copy_attr_all(new_dir, hidden_new_dir_dentry->d_inode);
++		if (new_dir != old_dir)
++			fist_copy_attr_all(old_dir, hidden_old_dir_dentry->d_inode);
++
++	out_lock:
++		/* double_unlock will dput the new/old parent dentries
++		 * whose refcnts were incremented via get_parent above.
++		 */
++		double_unlock(hidden_old_dir_dentry, hidden_new_dir_dentry);
++		dput(hidden_new_dentry);
++		dput(hidden_old_dentry);
++	out:
++		return err;
++	}
++	else { /* invalid state */
++		printk(KERN_CRIT "mini_fo: rename_reg_file: ERROR: invalid state detected [2].\n");
++		return -1;
++	}
++}
++
++
++STATIC int
++mini_fo_readlink(dentry_t *dentry, char *buf, int bufsiz)
++{
++	int err=0;
++	dentry_t *hidden_dentry = NULL;
++
++	if(dtohd2(dentry) && dtohd2(dentry)->d_inode) {
++		hidden_dentry = dtohd2(dentry);
++	} else if(dtohd(dentry) && dtohd(dentry)->d_inode) {
++		hidden_dentry = dtohd(dentry);
++	} else {
++		goto out;
++	}
++
++	if (!hidden_dentry->d_inode->i_op ||
++	    !hidden_dentry->d_inode->i_op->readlink) {
++		err = -EINVAL;		goto out;
++	}
++
++	err = hidden_dentry->d_inode->i_op->readlink(hidden_dentry,
++						     buf,
++						     bufsiz);
++	if (err > 0)
++		fist_copy_attr_atime(dentry->d_inode, hidden_dentry->d_inode);
++
++ out:
++	return err;
++}
++
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
++static int mini_fo_follow_link(dentry_t *dentry, struct nameidata *nd)
++#else
++static void* mini_fo_follow_link(dentry_t *dentry, struct nameidata *nd)
++#endif
++{
++	char *buf;
++	int len = PAGE_SIZE, err;
++	mm_segment_t old_fs;
++
++	/* in 2.6 this is freed by mini_fo_put_link called by __do_follow_link */
++	buf = kmalloc(len, GFP_KERNEL);
++	if (!buf) {
++		err = -ENOMEM;
++		goto out;
++	}
++
++	/* read the symlink, and then we will follow it */
++	old_fs = get_fs();
++	set_fs(KERNEL_DS);
++	err = dentry->d_inode->i_op->readlink(dentry, buf, len);
++	set_fs(old_fs);
++	if (err < 0) {
++		kfree(buf);
++		buf = NULL;
++		goto out;
++	}
++	buf[err] = 0;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++        nd_set_link(nd, buf);
++        err = 0;
++#else
++	err = vfs_follow_link(nd, buf);
++#endif
++
++ out:
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	kfree(buf);
++#endif
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
++        return err;
++#else
++        return ERR_PTR(err);
++#endif
++}
++
++STATIC
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13)
++void mini_fo_put_link(struct dentry *dentry, struct nameidata *nd)
++#else
++void mini_fo_put_link(struct dentry *dentry, struct nameidata *nd, void *cookie)
++#endif
++{
++        char *link;
++        link = nd_get_link(nd);
++        kfree(link);
++}
++#endif
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_permission(inode_t *inode, int mask, struct nameidata *nd)
++#else
++mini_fo_permission(inode_t *inode, int mask)
++#endif
++{
++	inode_t *hidden_inode;
++	int mode;
++	int err;
++
++	if(itohi2(inode)) {
++		hidden_inode = itohi2(inode);
++	} else {
++		hidden_inode = itohi(inode);
++	}
++	mode = inode->i_mode;
++
++	/* not really needed, as permission handles everything:
++	 *	err = vfs_permission(inode, mask);
++	 *	if (err)
++	 *		goto out;
++	 */
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	err = permission(hidden_inode, mask, nd);
++#else
++	err = permission(hidden_inode, mask);
++#endif
++
++	/*  out: */
++	return err;
++}
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++STATIC int
++mini_fo_inode_revalidate(dentry_t *dentry)
++{
++	int err = 0;
++	dentry_t *hidden_dentry;
++	inode_t *hidden_inode;
++
++	ASSERT(dentry->d_inode);
++	ASSERT(itopd(dentry->d_inode));
++
++	if(itohi2(dentry->d_inode)) {
++                hidden_dentry = dtohd2(dentry);
++		hidden_inode = hidden_dentry->d_inode;
++	} else if(itohi(dentry->d_inode)) {
++                hidden_dentry = dtohd(dentry);
++		hidden_inode = hidden_dentry->d_inode;
++	} else {
++                printk(KERN_CRIT "mini_fo_inode_revalidate: ERROR, invalid state detected.\n");
++                err = -ENOENT;
++                goto out;
++        }
++	if (hidden_inode && hidden_inode->i_op && hidden_inode->i_op->revalidate){
++		err = hidden_inode->i_op->revalidate(hidden_dentry);
++		if (err)
++			goto out;
++	}
++	fist_copy_attr_all(dentry->d_inode, hidden_inode);
++ out:
++	return err;
++}
++#endif
++
++STATIC int
++mini_fo_setattr(dentry_t *dentry, struct iattr *ia)
++{
++	int err = 0;
++
++	check_mini_fo_dentry(dentry);
++
++	if(!is_mini_fo_existant(dentry)) {
++		printk(KERN_CRIT "mini_fo_setattr: ERROR, invalid state detected [1].\n");
++		goto out;
++	}
++
++	if(dtost(dentry) == UNMODIFIED) {
++		if(!IS_COPY_FLAG(ia->ia_valid))
++			goto out; /* we ignore these changes to base */
++
++		if(S_ISDIR(dentry->d_inode->i_mode)) {
++			err = dir_unmod_to_mod(dentry);
++		} else {
++			/* we copy contents if file is not beeing truncated */
++			if(S_ISREG(dentry->d_inode->i_mode) &&
++			   !(ia->ia_size == 0 && (ia->ia_valid & ATTR_SIZE))) {
++				err = nondir_unmod_to_mod(dentry, 1);
++			} else
++				err = nondir_unmod_to_mod(dentry, 0);
++		}
++		if(err) {
++			err = -EINVAL;
++			printk(KERN_CRIT "mini_fo_setattr: ERROR changing states.\n");
++			goto out;
++		}
++	}
++	if(!exists_in_storage(dentry)) {
++		printk(KERN_CRIT "mini_fo_setattr: ERROR, invalid state detected [2].\n");
++		err = -EINVAL;
++		goto out;
++	}
++	ASSERT(dentry->d_inode);
++	ASSERT(dtohd2(dentry));
++	ASSERT(itopd(dentry->d_inode));
++	ASSERT(itohi2(dentry->d_inode));
++
++	err = notify_change(dtohd2(dentry), ia);
++	fist_copy_attr_all(dentry->d_inode, itohi2(dentry->d_inode));
++ out:
++	return err;
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++STATIC int
++mini_fo_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat)
++{
++	int err = 0;
++        dentry_t *hidden_dentry;
++
++	ASSERT(dentry->d_inode);
++	ASSERT(itopd(dentry->d_inode));
++
++	if(itohi2(dentry->d_inode)) {
++                hidden_dentry = dtohd2(dentry);
++	} else if(itohi(dentry->d_inode)) {
++                hidden_dentry = dtohd(dentry);
++	} else {
++                printk(KERN_CRIT "mini_fo_getattr: ERROR, invalid state detected.\n");
++                err = -ENOENT;
++                goto out;
++        }
++	fist_copy_attr_all(dentry->d_inode, hidden_dentry->d_inode);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	generic_fillattr(dentry->d_inode, stat);
++	if (!stat->blksize) {
++		struct super_block *s = hidden_dentry->d_inode->i_sb;
++		unsigned blocks;
++		blocks = (stat->size+s->s_blocksize-1) >> s->s_blocksize_bits;
++		stat->blocks = (s->s_blocksize / 512) * blocks;
++		stat->blksize = s->s_blocksize;
++	}
++ out:
++        return err;
++}
++#endif
++
++#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20))
++#if 0 /* no xattr_alloc() and xattr_free() */
++/* This is lifted from fs/xattr.c */
++static void *
++xattr_alloc(size_t size, size_t limit)
++{
++	void *ptr;
++
++	if (size > limit)
++		return ERR_PTR(-E2BIG);
++
++	if (!size)	/* size request, no buffer is needed */
++		return NULL;
++	else if (size <= PAGE_SIZE)
++		ptr = kmalloc((unsigned long) size, GFP_KERNEL);
++	else
++		ptr = vmalloc((unsigned long) size);
++	if (!ptr)
++		return ERR_PTR(-ENOMEM);
++	return ptr;
++}
++
++static void
++xattr_free(void *ptr, size_t size)
++{
++	if (!size)	/* size request, no buffer was needed */
++		return;
++	else if (size <= PAGE_SIZE)
++		kfree(ptr);
++	else
++		vfree(ptr);
++}
++#endif /* no xattr_alloc() and xattr_free() */
++
++/* BKL held by caller.
++ * dentry->d_inode->i_sem down
++ */
++STATIC int
++mini_fo_getxattr(struct dentry *dentry, const char *name, void *value, size_t size) {
++	struct dentry *hidden_dentry = NULL;
++	int err = -EOPNOTSUPP;
++	/* Define these anyway so we don't need as much ifdef'ed code. */
++	char *encoded_name = NULL;
++	char *encoded_value = NULL;
++
++	check_mini_fo_dentry(dentry);
++
++	if(exists_in_storage(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else
++		hidden_dentry = dtohd(dentry);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	if (hidden_dentry->d_inode->i_op->getxattr) {
++		encoded_name = (char *)name;
++		encoded_value = (char *)value;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_dentry->d_inode->i_sem);
++#endif
++		/* lock_kernel() already done by caller. */
++		err = hidden_dentry->d_inode->i_op->getxattr(hidden_dentry, encoded_name, encoded_value, size);
++		/* unlock_kernel() will be done by caller. */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_dentry->d_inode->i_sem);
++#endif
++	}
++	return err;
++}
++
++/* BKL held by caller.
++ * dentry->d_inode->i_sem down
++ */
++STATIC int
++#if ((LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,21) \
++     && LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,23)) \
++     || LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
++mini_fo_setxattr(struct dentry *dentry, const char *name,
++		 const void *value, size_t size, int flags)
++#else
++mini_fo_setxattr(struct dentry *dentry, const char *name,
++		 void *value, size_t size, int flags)
++#endif
++
++{
++	struct dentry *hidden_dentry = NULL;
++	int err = -EOPNOTSUPP;
++
++	/* Define these anyway, so we don't have as much ifdef'ed code. */
++	char *encoded_value = NULL;
++	char *encoded_name = NULL;
++
++	check_mini_fo_dentry(dentry);
++
++	if(exists_in_storage(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else
++		hidden_dentry = dtohd(dentry);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	if (hidden_dentry->d_inode->i_op->setxattr) {
++		encoded_name = (char *)name;
++		encoded_value = (char *)value;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_dentry->d_inode->i_sem);
++#endif
++		/* lock_kernel() already done by caller. */
++		err = hidden_dentry->d_inode->i_op->setxattr(hidden_dentry, encoded_name, encoded_value, size, flags);
++		/* unlock_kernel() will be done by caller. */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_dentry->d_inode->i_sem);
++#endif
++	}
++	return err;
++}
++
++/* BKL held by caller.
++ * dentry->d_inode->i_sem down
++ */
++STATIC int
++mini_fo_removexattr(struct dentry *dentry, const char *name) {
++	struct dentry *hidden_dentry = NULL;
++	int err = -EOPNOTSUPP;
++	char *encoded_name;
++
++	check_mini_fo_dentry(dentry);
++
++	if(exists_in_storage(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else
++		hidden_dentry = dtohd(dentry);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	if (hidden_dentry->d_inode->i_op->removexattr) {
++		encoded_name = (char *)name;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_dentry->d_inode->i_sem);
++#endif
++		/* lock_kernel() already done by caller. */
++		err = hidden_dentry->d_inode->i_op->removexattr(hidden_dentry, encoded_name);
++		/* unlock_kernel() will be done by caller. */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_dentry->d_inode->i_sem);
++#endif
++	}
++	return err;
++}
++
++/* BKL held by caller.
++ * dentry->d_inode->i_sem down
++ */
++STATIC int
++mini_fo_listxattr(struct dentry *dentry, char *list, size_t size) {
++	struct dentry *hidden_dentry = NULL;
++	int err = -EOPNOTSUPP;
++	char *encoded_list = NULL;
++
++	check_mini_fo_dentry(dentry);
++
++	if(exists_in_storage(dentry))
++		hidden_dentry = dtohd2(dentry);
++	else
++		hidden_dentry = dtohd(dentry);
++
++	ASSERT(hidden_dentry);
++	ASSERT(hidden_dentry->d_inode);
++	ASSERT(hidden_dentry->d_inode->i_op);
++
++	if (hidden_dentry->d_inode->i_op->listxattr) {
++		encoded_list = list;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&hidden_dentry->d_inode->i_mutex);
++#else
++		down(&hidden_dentry->d_inode->i_sem);
++#endif
++		/* lock_kernel() already done by caller. */
++		err = hidden_dentry->d_inode->i_op->listxattr(hidden_dentry, encoded_list, size);
++		/* unlock_kernel() will be done by caller. */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_dentry->d_inode->i_sem);
++#endif
++	}
++	return err;
++}
++# endif /* defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20)) */
++
++struct inode_operations mini_fo_symlink_iops =
++	{
++		readlink:	mini_fo_readlink,
++		follow_link: mini_fo_follow_link,
++		/* mk: permission:	mini_fo_permission, */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++		revalidate:	mini_fo_inode_revalidate,
++#endif
++		setattr:	mini_fo_setattr,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		getattr:	mini_fo_getattr,
++		put_link:       mini_fo_put_link,
++#endif
++
++#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20))
++		setxattr:	mini_fo_setxattr,
++		getxattr:	mini_fo_getxattr,
++		listxattr:	mini_fo_listxattr,
++		removexattr: mini_fo_removexattr
++# endif /* defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20)) */
++	};
++
++struct inode_operations mini_fo_dir_iops =
++	{
++		create:	mini_fo_create,
++		lookup:	mini_fo_lookup,
++		link:	mini_fo_link,
++		unlink:	mini_fo_unlink,
++		symlink:	mini_fo_symlink,
++		mkdir:	mini_fo_mkdir,
++		rmdir:	mini_fo_rmdir,
++		mknod:	mini_fo_mknod,
++		rename:	mini_fo_rename,
++		/* no readlink/follow_link for non-symlinks */
++		// off because we have setattr
++		//    truncate:	mini_fo_truncate,
++		/* mk:permission:	mini_fo_permission, */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++		revalidate:	mini_fo_inode_revalidate,
++#endif
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		getattr:	mini_fo_getattr,
++#endif
++		setattr:	mini_fo_setattr,
++#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20))
++		setxattr:	mini_fo_setxattr,
++		getxattr:	mini_fo_getxattr,
++		listxattr:	mini_fo_listxattr,
++		removexattr: mini_fo_removexattr
++# endif /* XATTR && LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20) */
++	};
++
++struct inode_operations mini_fo_main_iops =
++	{
++		/* permission:	mini_fo_permission, */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++		revalidate:	mini_fo_inode_revalidate,
++#endif
++		setattr:	mini_fo_setattr,
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		getattr:	mini_fo_getattr,
++#endif
++#if defined(XATTR) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20))
++		setxattr:	mini_fo_setxattr,
++		getxattr:	mini_fo_getxattr,
++		listxattr:	mini_fo_listxattr,
++		removexattr:    mini_fo_removexattr
++# endif /* XATTR && LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20) */
++	};
+--- /dev/null
++++ b/fs/mini_fo/main.c
+@@ -0,0 +1,423 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++#include <linux/module.h>
++
++/* This definition must only appear after we include <linux/module.h> */
++#ifndef MODULE_LICENSE
++# define MODULE_LICENSE(bison)
++#endif /* not MODULE_LICENSE */
++
++/*
++ * This is the mini_fo tri interpose function, which extends the
++ * functionality of the regular interpose by interposing a higher
++ * level inode on top of two lower level ones: the base filesystem
++ * inode and the storage filesystem inode.
++ *
++ *  sb we pass is mini_fo's super_block
++ */
++int
++mini_fo_tri_interpose(dentry_t *hidden_dentry,
++		      dentry_t *hidden_sto_dentry,
++		      dentry_t *dentry, super_block_t *sb, int flag)
++{
++	inode_t *hidden_inode = NULL;
++	inode_t *hidden_sto_inode = NULL; /* store corresponding storage inode */
++	int err = 0;
++	inode_t *inode;
++
++	/* Pointer to hidden_sto_inode if exists, else to hidden_inode.
++	 * This is used to copy the attributes of the correct inode. */
++	inode_t *master_inode;
++
++	if(hidden_dentry)
++		hidden_inode = hidden_dentry->d_inode;
++	if(hidden_sto_dentry)
++		hidden_sto_inode = hidden_sto_dentry->d_inode;
++
++	ASSERT(dentry->d_inode == NULL);
++
++	/* mk: One of the inodes associated with the dentrys is likely to
++	 * be NULL, so carefull:
++	 */
++	ASSERT((hidden_inode != NULL) || (hidden_sto_inode != NULL));
++
++	if(hidden_sto_inode)
++		master_inode = hidden_sto_inode;
++	else
++		master_inode = hidden_inode;
++
++	/*
++	 * We allocate our new inode below, by calling iget.
++	 * iget will call our read_inode which will initialize some
++	 * of the new inode's fields
++	 */
++
++	/*
++	 * original: inode = iget(sb, hidden_inode->i_ino);
++	 */
++	inode = iget(sb, iunique(sb, 25));
++	if (!inode) {
++		err = -EACCES;		/* should be impossible??? */
++		goto out;
++	}
++
++	/*
++	 * interpose the inode if not already interposed
++	 *   this is possible if the inode is being reused
++	 * XXX: what happens if we get_empty_inode() but there's another already?
++	 * for now, ASSERT() that this can't happen; fix later.
++	 */
++	if (itohi(inode) != NULL) {
++		printk(KERN_CRIT "mini_fo_tri_interpose: itohi(inode) != NULL.\n");
++	}
++	if (itohi2(inode) != NULL) {
++		printk(KERN_CRIT "mini_fo_tri_interpose: itohi2(inode) != NULL.\n");
++	}
++
++	/* mk: Carefull, igrab can't handle NULL inodes (ok, why should it?), so
++	 * we need to check here:
++	 */
++	if(hidden_inode)
++		itohi(inode) = igrab(hidden_inode);
++	else
++		itohi(inode) = NULL;
++
++	if(hidden_sto_inode)
++		itohi2(inode) = igrab(hidden_sto_inode);
++	else
++		itohi2(inode) = NULL;
++
++
++	/* Use different set of inode ops for symlinks & directories*/
++	if (S_ISLNK(master_inode->i_mode))
++		inode->i_op = &mini_fo_symlink_iops;
++	else if (S_ISDIR(master_inode->i_mode))
++		inode->i_op = &mini_fo_dir_iops;
++
++	/* Use different set of file ops for directories */
++	if (S_ISDIR(master_inode->i_mode))
++		inode->i_fop = &mini_fo_dir_fops;
++
++	/* properly initialize special inodes */
++	if (S_ISBLK(master_inode->i_mode) || S_ISCHR(master_inode->i_mode) ||
++	    S_ISFIFO(master_inode->i_mode) || S_ISSOCK(master_inode->i_mode)) {
++		init_special_inode(inode, master_inode->i_mode, master_inode->i_rdev);
++	}
++
++	/* Fix our inode's address operations to that of the lower inode */
++	if (inode->i_mapping->a_ops != master_inode->i_mapping->a_ops) {
++		inode->i_mapping->a_ops = master_inode->i_mapping->a_ops;
++	}
++
++	/* only (our) lookup wants to do a d_add */
++	if (flag)
++		d_add(dentry, inode);
++	else
++		d_instantiate(dentry, inode);
++
++	ASSERT(dtopd(dentry) != NULL);
++
++	/* all well, copy inode attributes */
++	fist_copy_attr_all(inode, master_inode);
++
++ out:
++	return err;
++}
++
++/* parse mount options "base=" and "sto=" */
++dentry_t *
++mini_fo_parse_options(super_block_t *sb, char *options)
++{
++	dentry_t *hidden_root = ERR_PTR(-EINVAL);
++	dentry_t *hidden_root2 = ERR_PTR(-EINVAL);
++	struct nameidata nd, nd2;
++	char *name, *tmp, *end;
++	int err = 0;
++
++	/* We don't want to go off the end of our arguments later on. */
++	for (end = options; *end; end++);
++
++	while (options < end) {
++		tmp = options;
++		while (*tmp && *tmp != ',')
++			tmp++;
++		*tmp = '\0';
++		if (!strncmp("base=", options, 5)) {
++			name = options + 5;
++			printk(KERN_INFO "mini_fo: using base directory: %s\n", name);
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++			if (path_init(name, LOOKUP_FOLLOW, &nd))
++				err = path_walk(name, &nd);
++#else
++			err = path_lookup(name, LOOKUP_FOLLOW, &nd);
++#endif
++			if (err) {
++				printk(KERN_CRIT "mini_fo: error accessing hidden directory '%s'\n", name);
++				hidden_root = ERR_PTR(err);
++				goto out;
++			}
++			hidden_root = nd.dentry;
++			stopd(sb)->base_dir_dentry = nd.dentry;
++			stopd(sb)->hidden_mnt = nd.mnt;
++
++		} else if(!strncmp("sto=", options, 4)) {
++			/* parse the storage dir */
++			name = options + 4;
++			printk(KERN_INFO "mini_fo: using storage directory: %s\n", name);
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++			if(path_init(name, LOOKUP_FOLLOW, &nd2))
++				err = path_walk(name, &nd2);
++#else
++                        err = path_lookup(name, LOOKUP_FOLLOW, &nd2);
++#endif
++			if(err) {
++				printk(KERN_CRIT "mini_fo: error accessing hidden storage directory '%s'\n", name);
++
++				hidden_root2 = ERR_PTR(err);
++				goto out;
++			}
++			hidden_root2 = nd2.dentry;
++			stopd(sb)->storage_dir_dentry = nd2.dentry;
++			stopd(sb)->hidden_mnt2 = nd2.mnt;
++			stohs2(sb) = hidden_root2->d_sb;
++
++			/* validate storage dir, this is done in
++			 * mini_fo_read_super for the base directory.
++			 */
++			if (IS_ERR(hidden_root2)) {
++				printk(KERN_WARNING "mini_fo_parse_options: storage dentry lookup failed (err = %ld)\n", PTR_ERR(hidden_root2));
++				goto out;
++			}
++			if (!hidden_root2->d_inode) {
++				printk(KERN_WARNING "mini_fo_parse_options: no storage dir to interpose on.\n");
++				goto out;
++			}
++			stohs2(sb) = hidden_root2->d_sb;
++		} else {
++			printk(KERN_WARNING "mini_fo: unrecognized option '%s'\n", options);
++			hidden_root = ERR_PTR(-EINVAL);
++			goto out;
++		}
++		options = tmp + 1;
++	}
++
++ out:
++	if(IS_ERR(hidden_root2))
++		return hidden_root2;
++	return hidden_root;
++}
++
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++static int
++#else
++super_block_t *
++#endif
++mini_fo_read_super(super_block_t *sb, void *raw_data, int silent)
++{
++	dentry_t *hidden_root;
++	int err = 0;
++
++	if (!raw_data) {
++		printk(KERN_WARNING "mini_fo_read_super: missing argument\n");
++		err = -EINVAL;
++		goto out;
++	}
++	/*
++	 * Allocate superblock private data
++	 */
++	__stopd(sb) = kmalloc(sizeof(struct mini_fo_sb_info), GFP_KERNEL);
++	if (!stopd(sb)) {
++		printk(KERN_WARNING "%s: out of memory\n", __FUNCTION__);
++		err = -ENOMEM;
++		goto out;
++	}
++	stohs(sb) = NULL;
++
++	hidden_root = mini_fo_parse_options(sb, raw_data);
++	if (IS_ERR(hidden_root)) {
++		printk(KERN_WARNING "mini_fo_read_super: lookup_dentry failed (err = %ld)\n", PTR_ERR(hidden_root));
++		err = PTR_ERR(hidden_root);
++		goto out_free;
++	}
++	if (!hidden_root->d_inode) {
++		printk(KERN_WARNING "mini_fo_read_super: no directory to interpose on\n");
++		goto out_free;
++	}
++	stohs(sb) = hidden_root->d_sb;
++
++	/*
++	 * Linux 2.4.2-ac3 and beyond has code in
++	 * mm/filemap.c:generic_file_write() that requires sb->s_maxbytes
++	 * to be populated.  If not set, all write()s under that sb will
++	 * return 0.
++	 *
++	 * Linux 2.4.4+ automatically sets s_maxbytes to MAX_NON_LFS;
++	 * the filesystem should override it only if it supports LFS.
++	 */
++	/* non-SCA code is good to go with LFS */
++	sb->s_maxbytes = hidden_root->d_sb->s_maxbytes;
++
++	sb->s_op = &mini_fo_sops;
++	/*
++	 * we can't use d_alloc_root if we want to use
++	 * our own interpose function unchanged,
++	 * so we simply replicate *most* of the code in d_alloc_root here
++	 */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	sb->s_root = d_alloc(NULL, &(const struct qstr) { "/", 1, 0 });
++#else
++	sb->s_root = d_alloc(NULL, &(const struct qstr){hash: 0, name: "/", len : 1});
++#endif
++	if (IS_ERR(sb->s_root)) {
++		printk(KERN_WARNING "mini_fo_read_super: d_alloc failed\n");
++		err = -ENOMEM;
++		goto out_dput;
++	}
++
++	sb->s_root->d_op = &mini_fo_dops;
++	sb->s_root->d_sb = sb;
++	sb->s_root->d_parent = sb->s_root;
++
++	/* link the upper and lower dentries */
++	__dtopd(sb->s_root) = (struct mini_fo_dentry_info *)
++		kmalloc(sizeof(struct mini_fo_dentry_info), GFP_KERNEL);
++	if (!dtopd(sb->s_root)) {
++		err = -ENOMEM;
++		goto out_dput2;
++	}
++	dtopd(sb->s_root)->state = MODIFIED;
++	dtohd(sb->s_root) = hidden_root;
++
++	/* fanout relevant, interpose on storage root dentry too */
++	dtohd2(sb->s_root) = stopd(sb)->storage_dir_dentry;
++
++	/* ...and call tri-interpose to interpose root dir inodes
++	 * if (mini_fo_interpose(hidden_root, sb->s_root, sb, 0))
++	 */
++	if(mini_fo_tri_interpose(hidden_root, dtohd2(sb->s_root), sb->s_root, sb, 0))
++		goto out_dput2;
++
++	/* initalize the wol list */
++	itopd(sb->s_root->d_inode)->deleted_list_size = -1;
++	itopd(sb->s_root->d_inode)->renamed_list_size = -1;
++	meta_build_lists(sb->s_root);
++
++	goto out;
++
++ out_dput2:
++	dput(sb->s_root);
++ out_dput:
++	dput(hidden_root);
++	dput(dtohd2(sb->s_root)); /* release the hidden_sto_dentry too */
++ out_free:
++	kfree(stopd(sb));
++	__stopd(sb) = NULL;
++ out:
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++        return err;
++#else
++        if (err) {
++		return ERR_PTR(err);
++        } else {
++		return sb;
++        }
++#endif
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++static int mini_fo_get_sb(struct file_system_type *fs_type,
++					  int flags, const char *dev_name,
++					  void *raw_data, struct vfsmount *mnt)
++{
++	return get_sb_nodev(fs_type, flags, raw_data, mini_fo_read_super, mnt);
++}
++#else
++static struct super_block *mini_fo_get_sb(struct file_system_type *fs_type,
++					  int flags, const char *dev_name,
++					  void *raw_data)
++{
++	return get_sb_nodev(fs_type, flags, raw_data, mini_fo_read_super);
++}
++#endif
++
++void mini_fo_kill_block_super(struct super_block *sb)
++{
++	generic_shutdown_super(sb);
++	/*
++	 *      XXX: BUG: Halcrow: Things get unstable sometime after this point:
++	 *      lib/rwsem-spinlock.c:127: spin_is_locked on uninitialized
++	 *      fs/fs-writeback.c:402: spin_lock(fs/super.c:a0381828) already
++	 *      locked by fs/fs-writeback.c/402
++	 *
++	 *      Apparently, someone's not releasing a lock on sb_lock...
++	 */
++}
++
++static struct file_system_type mini_fo_fs_type = {
++	.owner          = THIS_MODULE,
++	.name           = "mini_fo",
++	.get_sb         = mini_fo_get_sb,
++	.kill_sb        = mini_fo_kill_block_super,
++	.fs_flags       = 0,
++};
++
++
++#else
++static DECLARE_FSTYPE(mini_fo_fs_type, "mini_fo", mini_fo_read_super, 0);
++#endif
++
++static int __init init_mini_fo_fs(void)
++{
++	printk("Registering mini_fo version $Id$\n");
++	return register_filesystem(&mini_fo_fs_type);
++}
++static void __exit exit_mini_fo_fs(void)
++{
++	printk("Unregistering mini_fo version $Id$\n");
++	unregister_filesystem(&mini_fo_fs_type);
++}
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++EXPORT_NO_SYMBOLS;
++#endif
++
++MODULE_AUTHOR("Erez Zadok <ezk@cs.sunysb.edu>");
++MODULE_DESCRIPTION("FiST-generated mini_fo filesystem");
++MODULE_LICENSE("GPL");
++
++/* MODULE_PARM(fist_debug_var, "i"); */
++/* MODULE_PARM_DESC(fist_debug_var, "Debug level"); */
++
++module_init(init_mini_fo_fs)
++module_exit(exit_mini_fo_fs)
+--- /dev/null
++++ b/fs/mini_fo/Makefile
+@@ -0,0 +1,17 @@
++#
++# Makefile for mini_fo 2.4 and 2.6 Linux kernels
++#
++# Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License
++# as published by the Free Software Foundation; either version
++# 2 of the License, or (at your option) any later version.
++#
++
++obj-$(CONFIG_MINI_FO) := mini_fo.o
++mini_fo-objs   := meta.o dentry.o file.o inode.o main.o super.o state.o aux.o
++
++# dependencies
++${mini_fo-objs}: mini_fo.h fist.h
++
+--- /dev/null
++++ b/fs/mini_fo/meta.c
+@@ -0,0 +1,1000 @@
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif /* HAVE_CONFIG_H */
++#include "fist.h"
++#include "mini_fo.h"
++
++int meta_build_lists(dentry_t *dentry)
++{
++	struct mini_fo_inode_info *inode_info;
++
++	dentry_t *meta_dentry = 0;
++	file_t *meta_file = 0;
++	mm_segment_t old_fs;
++	void *buf;
++
++	int bytes, len;
++	struct vfsmount *meta_mnt;
++	char *entry;
++
++	inode_info = itopd(dentry->d_inode);
++	if(!(inode_info->deleted_list_size == -1 &&
++	     inode_info->renamed_list_size == -1)) {
++		printk(KERN_CRIT "mini_fo: meta_build_lists: \
++                                  Error, list(s) not virgin.\n");
++		return -1;
++	}
++
++	/* init our meta lists */
++	INIT_LIST_HEAD(&inode_info->deleted_list);
++	inode_info->deleted_list_size = 0;
++
++	INIT_LIST_HEAD(&inode_info->renamed_list);
++	inode_info->renamed_list_size = 0;
++
++  	/* might there be a META-file? */
++	if(dtohd2(dentry) && dtohd2(dentry)->d_inode) {
++		meta_dentry = lookup_one_len(META_FILENAME,
++					     dtohd2(dentry),
++					     strlen(META_FILENAME));
++		if(!meta_dentry->d_inode) {
++			dput(meta_dentry);
++			goto out_ok;
++		}
++		/* $%& err, is this correct? */
++		meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++		mntget(meta_mnt);
++
++
++		/* open META-file for reading */
++		meta_file = dentry_open(meta_dentry, meta_mnt, 0x0);
++		if(!meta_file || IS_ERR(meta_file)) {
++			printk(KERN_CRIT "mini_fo: meta_build_lists: \
++                                          ERROR opening META file.\n");
++			goto out_err;
++		}
++
++		/* check if fs supports reading */
++		if(!meta_file->f_op->read) {
++			printk(KERN_CRIT "mini_fo: meta_build_lists: \
++                                          ERROR, fs does not support reading.\n");
++			goto out_err_close;
++		}
++
++		/* allocate a page for transfering the data */
++		buf = (void *) __get_free_page(GFP_KERNEL);
++		if(!buf) {
++			printk(KERN_CRIT "mini_fo: meta_build_lists: \
++                                          ERROR, out of mem.\n");
++			goto out_err_close;
++		}
++		meta_file->f_pos = 0;
++		old_fs = get_fs();
++		set_fs(KERNEL_DS);
++		do {
++			char *c;
++			bytes = meta_file->f_op->read(meta_file, buf, PAGE_SIZE, &meta_file->f_pos);
++			if(bytes == PAGE_SIZE) {
++				/* trim a cut off filename and adjust f_pos to get it next time */
++				for(c = (char*) buf+PAGE_SIZE;
++				    *c != '\n';
++				    c--, bytes--, meta_file->f_pos--);
++			}
++			entry = (char *) buf;
++			while(entry < (char *) buf+bytes) {
++
++				char *old_path;
++				char *dir_name;
++				int old_len, new_len;
++
++				/* len without '\n'*/
++				len = (int) (strchr(entry, '\n') - entry);
++				switch (*entry) {
++				case 'D':
++					/* format: "D filename" */
++					meta_list_add_d_entry(dentry,
++							      entry+2,
++							      len-2);
++					break;
++				case 'R':
++					/* format: "R path/xy/dir newDir" */
++					old_path = entry+2;
++					dir_name = strchr(old_path, ' ') + 1;
++					old_len =  dir_name - old_path - 1;
++					new_len = ((int) entry) + len - ((int ) dir_name);
++					meta_list_add_r_entry(dentry,
++							      old_path,
++							      old_len,
++							      dir_name,
++							      new_len);
++					break;
++				default:
++					/* unknown entry type detected */
++					break;
++				}
++				entry += len+1;
++			}
++
++		} while(meta_file->f_pos < meta_dentry->d_inode->i_size);
++
++		free_page((unsigned long) buf);
++		set_fs(old_fs);
++		fput(meta_file);
++	}
++	goto out_ok;
++
++ out_err_close:
++	fput(meta_file);
++ out_err:
++	mntput(meta_mnt);
++	dput(meta_dentry);
++	return -1;
++ out_ok:
++	return 1; /* check this!!! inode_info->wol_size; */
++}
++
++/* cleanups up all lists and free's the mem by dentry */
++int meta_put_lists(dentry_t *dentry)
++{
++	if(!dentry || !dentry->d_inode) {
++		printk("mini_fo: meta_put_lists: invalid dentry passed.\n");
++		return -1;
++	}
++	return __meta_put_lists(dentry->d_inode);
++}
++
++/* cleanups up all lists and free's the mem by inode */
++int __meta_put_lists(inode_t *inode)
++{
++	int err = 0;
++	if(!inode || !itopd(inode)) {
++		printk("mini_fo: __meta_put_lists: invalid inode passed.\n");
++		return -1;
++	}
++	err = __meta_put_d_list(inode);
++	err |= __meta_put_r_list(inode);
++	return err;
++}
++
++int meta_sync_lists(dentry_t *dentry)
++{
++	int err = 0;
++	if(!dentry || !dentry->d_inode) {
++		printk("mini_fo: meta_sync_lists: \
++                        invalid dentry passed.\n");
++		return -1;
++	}
++	err = meta_sync_d_list(dentry, 0);
++	err |= meta_sync_r_list(dentry, 1);
++	return err;
++}
++
++
++/* remove all D entries from the renamed list and free the mem */
++int __meta_put_d_list(inode_t *inode)
++{
++	struct list_head *tmp;
++        struct deleted_entry *del_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode)) {
++		printk(KERN_CRIT "mini_fo: __meta_put_d_list: \
++                                  invalid inode passed.\n");
++		return -1;
++	}
++	inode_info = itopd(inode);
++
++        /* nuke the DELETED-list */
++        if(inode_info->deleted_list_size <= 0)
++		return 0;
++
++	while(!list_empty(&inode_info->deleted_list)) {
++		tmp = inode_info->deleted_list.next;
++		list_del(tmp);
++		del_entry = list_entry(tmp, struct deleted_entry, list);
++		kfree(del_entry->name);
++		kfree(del_entry);
++	}
++	inode_info->deleted_list_size = 0;
++
++	return 0;
++}
++
++/* remove all R entries from the renamed list and free the mem */
++int __meta_put_r_list(inode_t *inode)
++{
++	struct list_head *tmp;
++	struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode)) {
++		printk(KERN_CRIT "mini_fo: meta_put_r_list: invalid inode.\n");
++		return -1;
++	}
++	inode_info = itopd(inode);
++
++        /* nuke the RENAMED-list */
++        if(inode_info->renamed_list_size <= 0)
++		return 0;
++
++	while(!list_empty(&inode_info->renamed_list)) {
++		tmp = inode_info->renamed_list.next;
++		list_del(tmp);
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		kfree(ren_entry->new_name);
++		kfree(ren_entry->old_name);
++		kfree(ren_entry);
++	}
++	inode_info->renamed_list_size = 0;
++
++	return 0;
++}
++
++int meta_add_d_entry(dentry_t *dentry, const char *name, int len)
++{
++	int err = 0;
++	err = meta_list_add_d_entry(dentry, name, len);
++	err |= meta_write_d_entry(dentry,name,len);
++	return err;
++}
++
++/* add a D entry to the deleted list */
++int meta_list_add_d_entry(dentry_t *dentry, const char *name, int len)
++{
++        struct deleted_entry *del_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_list_add_d_entry: \
++                                  invalid dentry passed.\n");
++		return -1;
++	}
++	inode_info = itopd(dentry->d_inode);
++
++        if(inode_info->deleted_list_size < 0)
++                return -1;
++
++        del_entry = (struct deleted_entry *)
++		kmalloc(sizeof(struct deleted_entry), GFP_KERNEL);
++        del_entry->name = (char*) kmalloc(len, GFP_KERNEL);
++        if(!del_entry || !del_entry->name) {
++                printk(KERN_CRIT "mini_fo: meta_list_add_d_entry: \
++                                  out of mem.\n");
++		kfree(del_entry->name);
++		kfree(del_entry);
++                return -ENOMEM;
++        }
++
++        strncpy(del_entry->name, name, len);
++        del_entry->len = len;
++
++        list_add(&del_entry->list, &inode_info->deleted_list);
++        inode_info->deleted_list_size++;
++        return 0;
++}
++
++int meta_add_r_entry(dentry_t *dentry,
++			  const char *old_name, int old_len,
++			  const char *new_name, int new_len)
++{
++	int err = 0;
++	err = meta_list_add_r_entry(dentry,
++				    old_name, old_len,
++				    new_name, new_len);
++	err |= meta_write_r_entry(dentry,
++				  old_name, old_len,
++				  new_name, new_len);
++	return err;
++}
++
++/* add a R entry to the renamed list */
++int meta_list_add_r_entry(dentry_t *dentry,
++			  const char *old_name, int old_len,
++			  const char *new_name, int new_len)
++{
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_list_add_r_entry: \
++                                  invalid dentry passed.\n");
++		return -1;
++	}
++	inode_info = itopd(dentry->d_inode);
++
++        if(inode_info->renamed_list_size < 0)
++                return -1;
++
++        ren_entry = (struct renamed_entry *)
++		kmalloc(sizeof(struct renamed_entry), GFP_KERNEL);
++        ren_entry->old_name = (char*) kmalloc(old_len, GFP_KERNEL);
++        ren_entry->new_name = (char*) kmalloc(new_len, GFP_KERNEL);
++
++        if(!ren_entry || !ren_entry->old_name || !ren_entry->new_name) {
++                printk(KERN_CRIT "mini_fo: meta_list_add_r_entry: \
++                                  out of mem.\n");
++		kfree(ren_entry->new_name);
++		kfree(ren_entry->old_name);
++		kfree(ren_entry);
++                return -ENOMEM;
++        }
++
++        strncpy(ren_entry->old_name, old_name, old_len);
++        ren_entry->old_len = old_len;
++        strncpy(ren_entry->new_name, new_name, new_len);
++        ren_entry->new_len = new_len;
++
++        list_add(&ren_entry->list, &inode_info->renamed_list);
++        inode_info->renamed_list_size++;
++        return 0;
++}
++
++
++int meta_remove_r_entry(dentry_t *dentry, const char *name, int len)
++{
++	int err = 0;
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT
++		       "mini_fo: meta_remove_r_entry: \
++                        invalid dentry passed.\n");
++		return -1;
++	}
++
++	err = meta_list_remove_r_entry(dentry, name, len);
++	err |= meta_sync_lists(dentry);
++	return err;
++}
++
++int meta_list_remove_r_entry(dentry_t *dentry, const char *name, int len)
++{
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT
++		       "mini_fo: meta_list_remove_r_entry: \
++                        invalid dentry passed.\n");
++		return -1;
++	}
++	return __meta_list_remove_r_entry(dentry->d_inode, name, len);
++}
++
++int __meta_list_remove_r_entry(inode_t *inode, const char *name, int len)
++{
++	struct list_head *tmp;
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode))
++		printk(KERN_CRIT
++		       "mini_fo: __meta_list_remove_r_entry: \
++                        invalid inode passed.\n");
++	inode_info = itopd(inode);
++
++        if(inode_info->renamed_list_size < 0)
++                return -1;
++        if(inode_info->renamed_list_size == 0)
++                return 1;
++
++	list_for_each(tmp, &inode_info->renamed_list) {
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		if(ren_entry->new_len != len)
++			continue;
++
++		if(!strncmp(ren_entry->new_name, name, len)) {
++			list_del(tmp);
++			kfree(ren_entry->new_name);
++			kfree(ren_entry->old_name);
++			kfree(ren_entry);
++			inode_info->renamed_list_size--;
++			return 0;
++		}
++	}
++	return 1;
++}
++
++
++/* append a single D entry to the meta file */
++int meta_write_d_entry(dentry_t *dentry, const char *name, int len)
++{
++	dentry_t *meta_dentry = 0;
++        file_t *meta_file = 0;
++        mm_segment_t old_fs;
++
++        int bytes, err;
++        struct vfsmount *meta_mnt = 0;
++        char *buf;
++
++	err = 0;
++
++	if(itopd(dentry->d_inode)->deleted_list_size < 0) {
++		err = -1;
++		goto out;
++	}
++
++	if(dtopd(dentry)->state == UNMODIFIED) {
++                err = build_sto_structure(dentry->d_parent, dentry);
++                if(err) {
++                        printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                          build_sto_structure failed.\n");
++			goto out;
++                }
++        }
++	meta_dentry = lookup_one_len(META_FILENAME,
++				     dtohd2(dentry), strlen (META_FILENAME));
++
++	/* We need to create a META-file */
++        if(!meta_dentry->d_inode) {
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry,
++			   S_IRUSR | S_IWUSR,
++			   NULL);
++#else
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry,
++			   S_IRUSR | S_IWUSR);
++#endif
++	}
++        /* open META-file for writing */
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        if(!meta_file || IS_ERR(meta_file)) {
++                printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                  ERROR opening meta file.\n");
++                mntput(meta_mnt); /* $%& is this necessary? */
++                dput(meta_dentry);
++		err = -1;
++                goto out;
++        }
++
++        /* check if fs supports writing */
++        if(!meta_file->f_op->write) {
++                printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                  ERROR, fs does not support writing.\n");
++                goto out_err_close;
++        }
++
++	meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */
++        old_fs = get_fs();
++        set_fs(KERNEL_DS);
++
++	/* size: len for name, 1 for \n and 2 for "D " */
++	buf = (char *) kmalloc(len+3, GFP_KERNEL);
++	if (!buf) {
++		printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                  out of mem.\n");
++		return -ENOMEM;
++	}
++
++	buf[0] = 'D';
++	buf[1] = ' ';
++	strncpy(buf+2, name, len);
++	buf[len+2] = '\n';
++	bytes = meta_file->f_op->write(meta_file, buf, len+3,
++				       &meta_file->f_pos);
++	if(bytes != len+3) {
++		printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
++                                  ERROR writing.\n");
++		err = -1;
++	}
++	kfree(buf);
++	set_fs(old_fs);
++
++ out_err_close:
++	fput(meta_file);
++ out:
++	return err;
++}
++
++/* append a single R entry to the meta file */
++int meta_write_r_entry(dentry_t *dentry,
++		       const char *old_name, int old_len,
++		       const char *new_name, int new_len)
++{
++	dentry_t *meta_dentry = 0;
++        file_t *meta_file = 0;
++        mm_segment_t old_fs;
++
++        int bytes, err, buf_len;
++	struct vfsmount *meta_mnt = 0;
++        char *buf;
++
++
++	err = 0;
++
++	if(itopd(dentry->d_inode)->renamed_list_size < 0) {
++		err = -1;
++		goto out;
++	}
++
++	/* build the storage structure? */
++	if(dtopd(dentry)->state == UNMODIFIED) {
++                err = build_sto_structure(dentry->d_parent, dentry);
++                if(err) {
++                        printk(KERN_CRIT "mini_fo: meta_write_r_entry: \
++                                          build_sto_structure failed.\n");
++			goto out;
++                }
++        }
++	meta_dentry = lookup_one_len(META_FILENAME,
++				     dtohd2(dentry),
++				     strlen (META_FILENAME));
++        if(!meta_dentry->d_inode) {
++                /* We need to create a META-file */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR, NULL);
++#else
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR);
++#endif
++	}
++        /* open META-file for writing */
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        if(!meta_file || IS_ERR(meta_file)) {
++                printk(KERN_CRIT "mini_fo: meta_write_r_entry: \
++                                  ERROR opening meta file.\n");
++                mntput(meta_mnt);
++                dput(meta_dentry);
++		err = -1;
++                goto out;
++        }
++
++        /* check if fs supports writing */
++        if(!meta_file->f_op->write) {
++                printk(KERN_CRIT "mini_fo: meta_write_r_entry: \
++                                  ERROR, fs does not support writing.\n");
++                goto out_err_close;
++        }
++
++	meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */
++        old_fs = get_fs();
++        set_fs(KERNEL_DS);
++
++	/* size: 2 for "R ", old_len+new_len for names, 1 blank+1 \n */
++	buf_len = old_len + new_len + 4;
++	buf = (char *) kmalloc(buf_len, GFP_KERNEL);
++	if (!buf) {
++		printk(KERN_CRIT "mini_fo: meta_write_r_entry: out of mem.\n");
++		return -ENOMEM;
++	}
++
++	buf[0] = 'R';
++	buf[1] = ' ';
++	strncpy(buf + 2, old_name, old_len);
++	buf[old_len + 2] = ' ';
++	strncpy(buf + old_len + 3, new_name, new_len);
++	buf[buf_len -1] = '\n';
++	bytes = meta_file->f_op->write(meta_file, buf, buf_len, &meta_file->f_pos);
++	if(bytes != buf_len) {
++		printk(KERN_CRIT "mini_fo: meta_write_r_entry: ERROR writing.\n");
++		err = -1;
++	}
++
++	kfree(buf);
++	set_fs(old_fs);
++
++ out_err_close:
++	fput(meta_file);
++ out:
++	return err;
++}
++
++/* sync D list to disk, append data if app_flag is 1 */
++/* check the meta_mnt, which seems not to be used (properly)  */
++
++int meta_sync_d_list(dentry_t *dentry, int app_flag)
++{
++	dentry_t *meta_dentry;
++        file_t *meta_file;
++        mm_segment_t old_fs;
++
++        int bytes, err;
++        struct vfsmount *meta_mnt;
++        char *buf;
++
++	struct list_head *tmp;
++        struct deleted_entry *del_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	err = 0;
++	meta_file=0;
++	meta_mnt=0;
++
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                  invalid inode passed.\n");
++		err = -1;
++		goto out;
++	}
++	inode_info = itopd(dentry->d_inode);
++
++        if(inode_info->deleted_list_size < 0) {
++		err = -1;
++		goto out;
++	}
++
++	/* ok, there is something to sync */
++
++	/* build the storage structure? */
++        if(!dtohd2(dentry) && !itohi2(dentry->d_inode)) {
++                err = build_sto_structure(dentry->d_parent, dentry);
++                if(err) {
++                        printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                          build_sto_structure failed.\n");
++			goto out;
++                }
++        }
++	meta_dentry = lookup_one_len(META_FILENAME,
++				     dtohd2(dentry),
++				     strlen(META_FILENAME));
++        if(!meta_dentry->d_inode) {
++                /* We need to create a META-file */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR, NULL);
++#else
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR);
++#endif
++		app_flag = 0;
++	}
++	/* need we truncate the meta file? */
++	if(!app_flag) {
++		struct iattr newattrs;
++                newattrs.ia_size = 0;
++                newattrs.ia_valid = ATTR_SIZE | ATTR_CTIME;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&meta_dentry->d_inode->i_mutex);
++#else
++                down(&meta_dentry->d_inode->i_sem);
++#endif
++                err = notify_change(meta_dentry, &newattrs);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&meta_dentry->d_inode->i_mutex);
++#else
++                up(&meta_dentry->d_inode->i_sem);
++#endif
++
++                if(err || meta_dentry->d_inode->i_size != 0) {
++                        printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                          ERROR truncating meta file.\n");
++                        goto out_err_close;
++		}
++	}
++
++        /* open META-file for writing */
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        if(!meta_file || IS_ERR(meta_file)) {
++                printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                  ERROR opening meta file.\n");
++		/* we don't mntget so we dont't mntput (for now)
++		 * mntput(meta_mnt);
++		 */
++		dput(meta_dentry);
++		err = -1;
++                goto out;
++        }
++
++        /* check if fs supports writing */
++        if(!meta_file->f_op->write) {
++                printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                  ERROR, fs does not support writing.\n");
++                goto out_err_close;
++        }
++
++	meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */
++        old_fs = get_fs();
++        set_fs(KERNEL_DS);
++
++	/* here we go... */
++        list_for_each(tmp, &inode_info->deleted_list) {
++		del_entry = list_entry(tmp, struct deleted_entry, list);
++
++		/* size: len for name, 1 for \n and 2 for "D " */
++		buf = (char *) kmalloc(del_entry->len+3, GFP_KERNEL);
++		if (!buf) {
++			printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                          out of mem.\n");
++			return -ENOMEM;
++		}
++
++		buf[0] = 'D';
++		buf[1] = ' ';
++		strncpy(buf+2, del_entry->name, del_entry->len);
++		buf[del_entry->len+2] = '\n';
++		bytes = meta_file->f_op->write(meta_file, buf,
++					       del_entry->len+3,
++					       &meta_file->f_pos);
++		if(bytes != del_entry->len+3) {
++			printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
++                                          ERROR writing.\n");
++			err |= -1;
++		}
++		kfree(buf);
++	}
++	set_fs(old_fs);
++
++ out_err_close:
++	fput(meta_file);
++ out:
++	return err;
++
++}
++
++int meta_sync_r_list(dentry_t *dentry, int app_flag)
++{
++	dentry_t *meta_dentry;
++        file_t *meta_file;
++        mm_segment_t old_fs;
++
++        int bytes, err, buf_len;
++        struct vfsmount *meta_mnt;
++        char *buf;
++
++	struct list_head *tmp;
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	err = 0;
++	meta_file=0;
++	meta_mnt=0;
++
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                  invalid dentry passed.\n");
++		err = -1;
++		goto out;
++	}
++	inode_info = itopd(dentry->d_inode);
++
++        if(inode_info->deleted_list_size < 0) {
++		err = -1;
++		goto out;
++	}
++
++	/* ok, there is something to sync */
++
++	/* build the storage structure? */
++        if(!dtohd2(dentry) && !itohi2(dentry->d_inode)) {
++                err = build_sto_structure(dentry->d_parent, dentry);
++                if(err) {
++                        printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                          build_sto_structure failed.\n");
++			goto out;
++                }
++        }
++	meta_dentry = lookup_one_len(META_FILENAME,
++				     dtohd2(dentry),
++				     strlen(META_FILENAME));
++        if(!meta_dentry->d_inode) {
++                /* We need to create a META-file */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR, NULL);
++#else
++                vfs_create(dtohd2(dentry)->d_inode,
++			   meta_dentry, S_IRUSR | S_IWUSR);
++#endif
++		app_flag = 0;
++	}
++	/* need we truncate the meta file? */
++	if(!app_flag) {
++		struct iattr newattrs;
++                newattrs.ia_size = 0;
++                newattrs.ia_valid = ATTR_SIZE | ATTR_CTIME;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_lock(&meta_dentry->d_inode->i_mutex);
++#else
++                down(&meta_dentry->d_inode->i_sem);
++#endif
++                err = notify_change(meta_dentry, &newattrs);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&meta_dentry->d_inode->i_mutex);
++#else
++                up(&meta_dentry->d_inode->i_sem);
++#endif
++                if(err || meta_dentry->d_inode->i_size != 0) {
++                        printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                          ERROR truncating meta file.\n");
++                        goto out_err_close;
++		}
++	}
++
++        /* open META-file for writing */
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        if(!meta_file || IS_ERR(meta_file)) {
++                printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                  ERROR opening meta file.\n");
++		/* we don't mntget so we dont't mntput (for now)
++		 * mntput(meta_mnt);
++		 */
++		dput(meta_dentry);
++		err = -1;
++                goto out;
++        }
++
++        /* check if fs supports writing */
++        if(!meta_file->f_op->write) {
++                printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                  ERROR, fs does not support writing.\n");
++                goto out_err_close;
++        }
++
++	meta_file->f_pos = meta_dentry->d_inode->i_size; /* append */
++        old_fs = get_fs();
++        set_fs(KERNEL_DS);
++
++	/* here we go... */
++        list_for_each(tmp, &inode_info->renamed_list) {
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		/* size:
++		 * 2 for "R ", old_len+new_len for names, 1 blank+1 \n */
++		buf_len = ren_entry->old_len + ren_entry->new_len + 4;
++		buf = (char *) kmalloc(buf_len, GFP_KERNEL);
++		if (!buf) {
++			printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                          out of mem.\n");
++			return -ENOMEM;
++		}
++		buf[0] = 'R';
++		buf[1] = ' ';
++		strncpy(buf + 2, ren_entry->old_name, ren_entry->old_len);
++		buf[ren_entry->old_len + 2] = ' ';
++		strncpy(buf + ren_entry->old_len + 3,
++			ren_entry->new_name, ren_entry->new_len);
++		buf[buf_len - 1] = '\n';
++		bytes = meta_file->f_op->write(meta_file, buf,
++					       buf_len, &meta_file->f_pos);
++		if(bytes != buf_len) {
++			printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
++                                          ERROR writing.\n");
++			err |= -1;
++		}
++		kfree(buf);
++	}
++	set_fs(old_fs);
++
++ out_err_close:
++	fput(meta_file);
++ out:
++	return err;
++}
++
++int meta_check_d_entry(dentry_t *dentry, const char *name, int len)
++{
++	if(!dentry || !dentry->d_inode)
++		printk(KERN_CRIT "mini_fo: meta_check_d_dentry: \
++                                  invalid dentry passed.\n");
++	return __meta_check_d_entry(dentry->d_inode, name, len);
++}
++
++int __meta_check_d_entry(inode_t *inode, const char *name, int len)
++{
++	struct list_head *tmp;
++        struct deleted_entry *del_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode))
++		printk(KERN_CRIT "mini_fo: __meta_check_d_dentry: \
++                                  invalid inode passed.\n");
++
++        inode_info = itopd(inode);
++
++        if(inode_info->deleted_list_size <= 0)
++                return 0;
++
++        list_for_each(tmp, &inode_info->deleted_list) {
++		del_entry = list_entry(tmp, struct deleted_entry, list);
++		if(del_entry->len != len)
++			continue;
++
++		if(!strncmp(del_entry->name, name, len))
++			return 1;
++	}
++	return 0;
++}
++
++/*
++ * check if file has been renamed and return path to orig. base dir.
++ * Implements no error return values so far, what of course sucks.
++ * String is null terminated.'
++ */
++char* meta_check_r_entry(dentry_t *dentry, const char *name, int len)
++{
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_check_r_dentry: \
++                                  invalid dentry passed.\n");
++		return NULL;
++	}
++	return __meta_check_r_entry(dentry->d_inode, name, len);
++}
++
++char* __meta_check_r_entry(inode_t *inode, const char *name, int len)
++{
++	struct list_head *tmp;
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++	char *old_path;
++
++	if(!inode || !itopd(inode)) {
++		printk(KERN_CRIT "mini_fo: meta_check_r_dentry: \
++                                  invalid inode passed.\n");
++		return NULL;
++	}
++	inode_info = itopd(inode);
++
++        if(inode_info->renamed_list_size <= 0)
++                return NULL;
++
++        list_for_each(tmp, &inode_info->renamed_list) {
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		if(ren_entry->new_len != len)
++			continue;
++
++		if(!strncmp(ren_entry->new_name, name, len)) {
++			old_path = (char *)
++				kmalloc(ren_entry->old_len+1, GFP_KERNEL);
++			strncpy(old_path,
++				ren_entry->old_name,
++				ren_entry->old_len);
++			old_path[ren_entry->old_len]='\0';
++			return old_path;
++		}
++	}
++	return NULL;
++}
++
++/*
++ * This version only checks if entry exists and return:
++ *     1 if exists,
++ *     0 if not,
++ *    -1 if error.
++ */
++int meta_is_r_entry(dentry_t *dentry, const char *name, int len)
++{
++	if(!dentry || !dentry->d_inode) {
++		printk(KERN_CRIT "mini_fo: meta_check_r_dentry [2]: \
++                                  invalid dentry passed.\n");
++		return -1;
++	}
++	return __meta_is_r_entry(dentry->d_inode, name, len);
++}
++
++int __meta_is_r_entry(inode_t *inode, const char *name, int len)
++{
++	struct list_head *tmp;
++        struct renamed_entry *ren_entry;
++        struct mini_fo_inode_info *inode_info;
++
++	if(!inode || !itopd(inode)) {
++		printk(KERN_CRIT "mini_fo: meta_check_r_dentry [2]: \
++                                  invalid inode passed.\n");
++		return -1;
++	}
++	inode_info = itopd(inode);
++
++        if(inode_info->renamed_list_size <= 0)
++                return -1;
++
++        list_for_each(tmp, &inode_info->renamed_list) {
++		ren_entry = list_entry(tmp, struct renamed_entry, list);
++		if(ren_entry->new_len != len)
++			continue;
++
++		if(!strncmp(ren_entry->new_name, name, len))
++			return 1;
++	}
++	return 0;
++}
++
+--- /dev/null
++++ b/fs/mini_fo/mini_fo.h
+@@ -0,0 +1,510 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifndef __MINI_FO_H_
++#define __MINI_FO_H_
++
++#ifdef __KERNEL__
++
++/* META stuff */
++#define META_FILENAME "META_dAfFgHE39ktF3HD2sr"
++
++/* use xattrs? */
++#define XATTR
++
++/* File attributes that when changed, result in a file beeing copied to storage */
++#define COPY_FLAGS ATTR_MODE | ATTR_UID | ATTR_GID | ATTR_SIZE
++
++/*
++ * mini_fo filestates
++ */
++#define MODIFIED       1
++#define UNMODIFIED     2
++#define CREATED        3
++#define DEL_REWRITTEN  4
++#define DELETED        5
++#define NON_EXISTANT   6
++
++/* fist file systems superblock magic */
++# define MINI_FO_SUPER_MAGIC 0xf15f
++
++/*
++ * STRUCTURES:
++ */
++
++/* mini_fo inode data in memory */
++struct mini_fo_inode_info {
++	inode_t *wii_inode;
++	inode_t *wii_inode2; /* pointer to storage inode */
++
++	/* META-data lists */
++	/* deleted list, ex wol */
++	struct list_head deleted_list;
++	int deleted_list_size;
++
++	/* renamed list */
++	struct list_head renamed_list;
++	int renamed_list_size;
++
++	/* add other lists here ... */
++};
++
++/* mini_fo dentry data in memory */
++struct mini_fo_dentry_info {
++	dentry_t *wdi_dentry;
++	dentry_t *wdi_dentry2; /* pointer to  storage dentry */
++	unsigned int state;  /* state of the mini_fo dentry */
++};
++
++
++/* mini_fo super-block data in memory */
++struct mini_fo_sb_info {
++	super_block_t *wsi_sb, *wsi_sb2; /* mk: might point to the same sb */
++	struct vfsmount *hidden_mnt, *hidden_mnt2;
++	dentry_t *base_dir_dentry;
++	dentry_t *storage_dir_dentry;
++	;
++};
++
++/* readdir_data, readdir helper struct */
++struct readdir_data {
++	struct list_head ndl_list; /* linked list head ptr */
++	int ndl_size; /* list size */
++	int sto_done; /* flag to show that the storage dir entries have
++		       * all been read an now follow base entries */
++};
++
++/* file private data. */
++struct mini_fo_file_info {
++	struct file *wfi_file;
++	struct file *wfi_file2; /* pointer to storage file */
++	struct readdir_data rd;
++};
++
++/* struct ndl_entry */
++struct ndl_entry {
++	struct list_head list;
++	char *name;
++	int len;
++};
++
++/********************************
++ *  META-data structures
++ ********************************/
++
++/* deleted entry */
++struct deleted_entry {
++	struct list_head list;
++	char *name;
++	int len;
++};
++
++/* renamed entry */
++struct renamed_entry {
++	struct list_head list;
++	char *old_name;     /* old directory with full path */
++	int old_len;        /* length of above string */
++	char *new_name;     /* new directory name */
++	int new_len;        /* length of above string */
++};
++
++/* attr_change entry */
++struct attr_change_entry {
++	struct list_head list;
++	char *name;
++	int len;
++};
++
++/* link entry */
++struct link_entry {
++	struct list_head list;
++	int links_moved;
++	int inum_base;
++	int inum_sto;
++	char *weird_name;
++	int weird_name_len;
++};
++
++
++/* Some other stuff required for mini_fo_filldir64, copied from
++ * fs/readdir.c
++ */
++
++#define ROUND_UP64(x) (((x)+sizeof(u64)-1) & ~(sizeof(u64)-1))
++#define NAME_OFFSET(de) ((int) ((de)->d_name - (char *) (de)))
++
++
++struct linux_dirent64 {
++        u64             d_ino;
++        s64             d_off;
++        unsigned short  d_reclen;
++        unsigned char   d_type;
++        char            d_name[0];
++};
++
++
++struct getdents_callback64 {
++        struct linux_dirent64 * current_dir;
++        struct linux_dirent64 * previous;
++        int count;
++        int error;
++};
++
++struct linux_dirent {
++	unsigned long   d_ino;
++	unsigned long   d_off;
++	unsigned short  d_reclen;
++	char            d_name[1];
++};
++
++struct getdents_callback {
++	struct linux_dirent * current_dir;
++	struct linux_dirent * previous;
++	int count;
++	int error;
++};
++
++
++/*
++ * MACROS:
++ */
++
++/* file TO private_data */
++# define ftopd(file) ((struct mini_fo_file_info *)((file)->private_data))
++# define __ftopd(file) ((file)->private_data)
++/* file TO hidden_file */
++# define ftohf(file) ((ftopd(file))->wfi_file)
++# define ftohf2(file) ((ftopd(file))->wfi_file2)
++
++/* inode TO private_data */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++# define itopd(ino) ((struct mini_fo_inode_info *)(ino)->i_private)
++# define __itopd(ino) ((ino)->i_private)
++#else
++# define itopd(ino) ((struct mini_fo_inode_info *)(ino)->u.generic_ip)
++# define __itopd(ino) ((ino)->u.generic_ip)
++#endif
++/* inode TO hidden_inode */
++# define itohi(ino) (itopd(ino)->wii_inode)
++# define itohi2(ino) (itopd(ino)->wii_inode2)
++
++/* superblock TO private_data */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++# define stopd(super) ((struct mini_fo_sb_info *)(super)->s_fs_info)
++# define __stopd(super) ((super)->s_fs_info)
++#else
++# define stopd(super) ((struct mini_fo_sb_info *)(super)->u.generic_sbp)
++# define __stopd(super) ((super)->u.generic_sbp)
++#endif
++
++/* unused? # define vfs2priv stopd */
++/* superblock TO hidden_superblock */
++
++# define stohs(super) (stopd(super)->wsi_sb)
++# define stohs2(super) (stopd(super)->wsi_sb2)
++
++/* dentry TO private_data */
++# define dtopd(dentry) ((struct mini_fo_dentry_info *)(dentry)->d_fsdata)
++# define __dtopd(dentry) ((dentry)->d_fsdata)
++/* dentry TO hidden_dentry */
++# define dtohd(dent) (dtopd(dent)->wdi_dentry)
++# define dtohd2(dent) (dtopd(dent)->wdi_dentry2)
++
++/* dentry to state */
++# define dtost(dent) (dtopd(dent)->state)
++# define sbt(sb) ((sb)->s_type->name)
++
++#define IS_WRITE_FLAG(flag) (flag & (O_RDWR | O_WRONLY | O_APPEND))
++#define IS_COPY_FLAG(flag) (flag & (COPY_FLAGS))
++
++/* macros to simplify non-SCA code */
++#  define MALLOC_PAGE_POINTERS(hidden_pages, num_hidden_pages)
++#  define MALLOC_PAGEDATA_POINTERS(hidden_pages_data, num_hidden_pages)
++#  define FREE_PAGE_POINTERS(hidden_pages, num)
++#  define FREE_PAGEDATA_POINTERS(hidden_pages_data, num)
++#  define FOR_EACH_PAGE
++#  define CURRENT_HIDDEN_PAGE hidden_page
++#  define CURRENT_HIDDEN_PAGEDATA hidden_page_data
++#  define CURRENT_HIDDEN_PAGEINDEX page->index
++
++/*
++ * EXTERNALS:
++ */
++extern struct file_operations mini_fo_main_fops;
++extern struct file_operations mini_fo_dir_fops;
++extern struct inode_operations mini_fo_main_iops;
++extern struct inode_operations mini_fo_dir_iops;
++extern struct inode_operations mini_fo_symlink_iops;
++extern struct super_operations mini_fo_sops;
++extern struct dentry_operations mini_fo_dops;
++extern struct vm_operations_struct mini_fo_shared_vmops;
++extern struct vm_operations_struct mini_fo_private_vmops;
++extern struct address_space_operations mini_fo_aops;
++
++#if 0 /* unused by mini_fo */
++extern int mini_fo_interpose(dentry_t *hidden_dentry, dentry_t *this_dentry, super_block_t *sb, int flag);
++#if defined(FIST_FILTER_DATA) || defined(FIST_FILTER_SCA)
++extern page_t *mini_fo_get1page(file_t *file, int index);
++extern int mini_fo_fill_zeros(file_t *file, page_t *page, unsigned from);
++# endif /* FIST_FILTER_DATA || FIST_FILTER_SCA */
++
++
++#  define mini_fo_hidden_dentry(d) __mini_fo_hidden_dentry(__FILE__,__FUNCTION__,__LINE__,(d))
++#  define mini_fo_hidden_sto_dentry(d) __mini_fo_hidden_sto_dentry(__FILE__,__FUNCTION__,__LINE__,(d))
++
++extern dentry_t *__mini_fo_hidden_dentry(char *file, char *func, int line, dentry_t *this_dentry);
++extern dentry_t *__mini_fo_hidden_sto_dentry(char *file, char *func, int line, dentry_t *this_dentry);
++
++extern int mini_fo_read_file(const char *filename, void *buf, int len);
++extern int mini_fo_write_file(const char *filename, void *buf, int len);
++extern dentry_t *fist_lookup(dentry_t *dir, const char *name, vnode_t **out, uid_t uid, gid_t gid);
++#endif /* unused by mini_fo */
++
++/* state transition functions */
++extern int nondir_unmod_to_mod(dentry_t *dentry, int cp_flag);
++extern int nondir_del_rew_to_del(dentry_t *dentry);
++extern int nondir_creat_to_del(dentry_t *dentry);
++extern int nondir_mod_to_del(dentry_t *dentry);
++extern int nondir_unmod_to_del(dentry_t *dentry);
++
++extern int dir_unmod_to_mod(dentry_t *dentry);
++
++/* rename specials */
++extern int rename_directory(inode_t *old_dir, dentry_t *old_dentry, inode_t *new_dir, dentry_t *new_dentry);
++extern int rename_nondir(inode_t *old_dir, dentry_t *old_dentry, inode_t *new_dir, dentry_t *new_dentry);
++
++/* misc stuff */
++extern int mini_fo_tri_interpose(dentry_t *hidden_dentry,
++				 dentry_t *hidden_sto_dentry,
++				 dentry_t *dentry,
++				 super_block_t *sb, int flag);
++
++extern int mini_fo_cp_cont(dentry_t *tgt_dentry, struct vfsmount *tgt_mnt,
++			   dentry_t *src_dentry, struct vfsmount *src_mnt);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++extern int mini_fo_create(inode_t *dir, dentry_t *dentry, int mode, struct nameidata *nd);
++
++extern int create_sto_nod(dentry_t *dentry, int mode, dev_t dev);
++extern int create_sto_reg_file(dentry_t *dentry, int mode, struct nameidata *nd);
++#else
++extern int mini_fo_create(inode_t *dir, dentry_t *dentry, int mode);
++
++extern int create_sto_nod(dentry_t *dentry, int mode, int dev);
++extern int create_sto_reg_file(dentry_t *dentry, int mode);
++#endif
++
++extern int create_sto_dir(dentry_t *dentry, int mode);
++
++extern int exists_in_storage(dentry_t *dentry);
++extern int is_mini_fo_existant(dentry_t *dentry);
++extern int get_neg_sto_dentry(dentry_t *dentry);
++extern int build_sto_structure(dentry_t *dir, dentry_t *dentry);
++extern int get_mini_fo_bpath(dentry_t *dentry, char **bpath, int *bpath_len);
++extern dentry_t *bpath_walk(super_block_t *sb, char *bpath);
++extern int bpath_put(dentry_t *dentry);
++
++/* check_mini_fo types functions */
++extern int check_mini_fo_dentry(dentry_t *dentry);
++extern int check_mini_fo_file(file_t *file);
++extern int check_mini_fo_inode(inode_t *inode);
++
++/* General meta functions, can be called from outside of meta.c */
++extern int meta_build_lists(dentry_t *dentry);
++extern int meta_put_lists(dentry_t *dentry);
++extern int __meta_put_lists(inode_t *inode);
++
++extern int meta_add_d_entry(dentry_t *dentry, const char *name, int len);
++extern int meta_add_r_entry(dentry_t *dentry,
++			    const char *old_name, int old_len,
++			    const char *new_name, int new_len);
++
++extern int meta_remove_r_entry(dentry_t *dentry, const char *name, int len);
++
++extern int meta_check_d_entry(dentry_t *dentry, const char *name, int len);
++extern int __meta_check_d_entry(inode_t *inode, const char *name, int len);
++
++extern char* meta_check_r_entry(dentry_t *dentry, const char *name, int len);
++extern char* __meta_check_r_entry(inode_t *inode, const char *name, int len);
++extern int meta_is_r_entry(dentry_t *dentry, const char *name, int len);
++extern int __meta_is_r_entry(inode_t *inode, const char *name, int len);
++
++/* Specific meta functions, should be called only inside meta.c */
++extern int __meta_put_d_list(inode_t *inode);
++extern int __meta_put_r_list(inode_t *inode);
++
++extern int meta_list_add_d_entry(dentry_t *dentry,
++				 const char *name, int len);
++extern int meta_list_add_r_entry(dentry_t *dentry,
++				 const char *old_name, int old_len,
++				 const char *new_name, int new_len);
++
++extern int meta_list_remove_r_entry(dentry_t *dentry,
++				    const char *name, int len);
++
++extern int __meta_list_remove_r_entry(inode_t *inode,
++				      const char *name, int len);
++
++extern int meta_write_d_entry(dentry_t *dentry, const char *name, int len);
++extern int meta_write_r_entry(dentry_t *dentry,
++			      const char *old_name, int old_len,
++			      const char *new_name, int new_len);
++
++extern int meta_sync_lists(dentry_t *dentry);
++extern int meta_sync_d_list(dentry_t *dentry, int app_flag);
++extern int meta_sync_r_list(dentry_t *dentry, int app_flag);
++
++/* ndl stuff */
++extern int ndl_add_entry(struct readdir_data *rd, const char *name, int len);
++extern void ndl_put_list(struct readdir_data *rd);
++extern int ndl_check_entry(struct readdir_data *rd,
++			   const char *name, int len);
++
++
++# define copy_inode_size(dst, src) \
++    dst->i_size = src->i_size; \
++    dst->i_blocks = src->i_blocks;
++
++static inline void
++fist_copy_attr_atime(inode_t *dest, const inode_t *src)
++{
++	ASSERT(dest != NULL);
++	ASSERT(src != NULL);
++	dest->i_atime = src->i_atime;
++}
++static inline void
++fist_copy_attr_times(inode_t *dest, const inode_t *src)
++{
++	ASSERT(dest != NULL);
++	ASSERT(src != NULL);
++	dest->i_atime = src->i_atime;
++	dest->i_mtime = src->i_mtime;
++	dest->i_ctime = src->i_ctime;
++}
++static inline void
++fist_copy_attr_timesizes(inode_t *dest, const inode_t *src)
++{
++	ASSERT(dest != NULL);
++	ASSERT(src != NULL);
++	dest->i_atime = src->i_atime;
++	dest->i_mtime = src->i_mtime;
++	dest->i_ctime = src->i_ctime;
++	copy_inode_size(dest, src);
++}
++static inline void
++fist_copy_attr_all(inode_t *dest, const inode_t *src)
++{
++	ASSERT(dest != NULL);
++	ASSERT(src != NULL);
++	dest->i_mode = src->i_mode;
++	dest->i_nlink = src->i_nlink;
++	dest->i_uid = src->i_uid;
++	dest->i_gid = src->i_gid;
++	dest->i_rdev = src->i_rdev;
++	dest->i_atime = src->i_atime;
++	dest->i_mtime = src->i_mtime;
++	dest->i_ctime = src->i_ctime;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)
++	dest->i_blksize = src->i_blksize;
++#endif
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,12)
++	dest->i_blkbits = src->i_blkbits;
++# endif /* linux 2.4.12 and newer */
++	copy_inode_size(dest, src);
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
++	dest->i_attr_flags = src->i_attr_flags;
++#else
++	dest->i_flags = src->i_flags;
++#endif
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++/* copied from linux/fs.h */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++static inline void double_lock(struct dentry *d1, struct dentry *d2)
++{
++	struct mutex *m1 = &d1->d_inode->i_mutex;
++	struct mutex *m2 = &d2->d_inode->i_mutex;
++	if (m1 != m2) {
++		if ((unsigned long) m1 < (unsigned long) m2) {
++			struct mutex *tmp = m2;
++			m2 = m1; m1 = tmp;
++		}
++		mutex_lock(m1);
++	}
++	mutex_lock(m2);
++}
++
++static inline void double_unlock(struct dentry *d1, struct dentry *d2)
++{
++	struct mutex *m1 = &d1->d_inode->i_mutex;
++	struct mutex *m2 = &d2->d_inode->i_mutex;
++	mutex_unlock(m1);
++	if (m1 != m2)
++		mutex_unlock(m2);
++	dput(d1);
++	dput(d2);
++}
++
++#else
++static inline void double_down(struct semaphore *s1, struct semaphore *s2)
++{
++        if (s1 != s2) {
++                if ((unsigned long) s1 < (unsigned long) s2) {
++                        struct semaphore *tmp = s2;
++                        s2 = s1; s1 = tmp;
++                }
++                down(s1);
++        }
++        down(s2);
++}
++
++static inline void double_up(struct semaphore *s1, struct semaphore *s2)
++{
++        up(s1);
++        if (s1 != s2)
++                up(s2);
++}
++
++static inline void double_lock(struct dentry *d1, struct dentry *d2)
++{
++        double_down(&d1->d_inode->i_sem, &d2->d_inode->i_sem);
++}
++
++static inline void double_unlock(struct dentry *d1, struct dentry *d2)
++{
++        double_up(&d1->d_inode->i_sem,&d2->d_inode->i_sem);
++        dput(d1);
++        dput(d2);
++}
++#endif   /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16) */
++#endif  /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) */
++#endif /* __KERNEL__ */
++
++/*
++ * Definitions for user and kernel code
++ */
++
++/* ioctls */
++
++#endif	/* not __MINI_FO_H_ */
+--- /dev/null
++++ b/fs/mini_fo/mini_fo-merge
+@@ -0,0 +1,180 @@
++#!/bin/bash
++#
++# Copyright (C) 2005 Markus Klotzbuecher <mk@creamnet.de>
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License
++# as published by the Free Software Foundation; either version
++# 2 of the License, or (at your option) any later version.
++#
++
++BASE=
++STO=
++HELP=
++DRYRUN=
++VERBOSE=
++TMP="/tmp/"
++META_NAME="META_dAfFgHE39ktF3HD2sr"
++SKIP_DEL_LIST="skip-delete-list.mini_fo-merge"
++
++COMMAND=
++exec_command()
++{
++    if [ x$DRYRUN == "xset" ]; then
++	echo "  would run: $COMMAND"
++    elif ! [ x$DRYRUN == "xset" ]; then
++	if [ x$VERBOSE == "xset" ]; then
++	    echo "  running: $COMMAND"
++	fi
++	eval $COMMAND
++    fi
++}
++
++usage()
++{
++cat <<EOF
++
++USAGE: $0 -b <base dir> -s <storage dir>
++Version 0.1
++
++This script merges the contents of a mini_fo storage file system back
++to the base file system.
++
++!!! Warning: This will modify the base filesystem and can destroy data
++             if used wrongly.
++
++Options:
++     -b <base dir>
++          the directory of the base file system.
++
++     -s <storage dir>
++          the directory of the storage file system.
++
++     -d   dry run, will not change anything and print the commands that
++          would be executed.
++
++     -t   tmp dir for storing temporary file. default: $TMP
++
++     -v   show what operations are performed.
++
++     -h   displays this message.
++
++EOF
++}
++
++# parse parameters
++while getopts hdvt:b:s: OPTS
++  do
++  case $OPTS in
++      h)  HELP="set";;
++      d)  DRYRUN="set";;
++      v)  VERBOSE="set";;
++      b)  BASE="$OPTARG";;
++      s)  STO="$OPTARG";;
++      t)  TMP="$OPTARG";;
++      ?)  usage
++	  exit 1;;
++  esac
++done
++
++if [ "x$HELP" == "xset" ]; then
++    usage
++    exit -1
++fi
++
++if ! [ -d "$BASE" ] || ! [ -d "$STO" ]; then
++    echo -e "$0:\n Error, -s and/or -b argument missing. type $0 -h for help."
++    exit -1;
++fi
++
++# get full paths
++pushd $STO; STO=`pwd`; popd
++pushd $BASE; BASE=`pwd`; popd
++TMP=${TMP%/}
++
++
++cat<<EOF
++###############################################################################
++# mini_fo-merge
++#
++# base dir:       $BASE
++# storage dir:    $STO
++# meta filename:  $META_NAME
++# dry run:        $DRYRUN
++# verbose:        $VERBOSE
++# tmp files:      $TMP
++###############################################################################
++
++EOF
++
++rm $TMP/$SKIP_DEL_LIST
++
++# first process all renamed dirs
++echo "Merging renamed directories..."
++pushd $STO &> /dev/null
++find . -name $META_NAME -type f -print0  | xargs -0 -e grep  -e '^R ' | tr -s ':R' ' ' | while read ENTRY; do
++    echo "entry: $ENTRY"
++    META_FILE=`echo $ENTRY | cut -d ' ' -f 1`
++    OLD_B_DIR=`echo $ENTRY | cut -d ' ' -f 2 | sed -e 's/\///'`
++    NEW_NAME=`echo $ENTRY | cut -d ' ' -f 3`
++    NEW_B_DIR=`echo $META_FILE | sed -e "s/$META_NAME/$NEW_NAME/" | sed -e 's/^\.\///'`
++    echo "META_FILE: $META_FILE"
++    echo "OLD_B_DIR: $OLD_B_DIR"
++    echo "NEW_NAME: $NEW_NAME"
++    echo  "NEW_B_DIR: $NEW_B_DIR"
++
++    pushd $BASE &> /dev/null
++    # remove an existing dir in storage
++    COMMAND="rm -rf $NEW_B_DIR"; exec_command
++    COMMAND="cp -R $OLD_B_DIR $NEW_B_DIR"; exec_command
++    echo ""
++    popd &> /dev/null
++
++    # remember this dir to exclude it from deleting later
++    echo $NEW_B_DIR >> $TMP/$SKIP_DEL_LIST
++done
++
++# delete all whiteouted files from base
++echo -e "\nDeleting whiteout'ed files from base file system..."
++find . -name $META_NAME -type f -print0  | xargs -0 -e grep  -e '^D ' | sed -e 's/:D//' | while read ENTRY; do
++    META_FILE=`echo $ENTRY | cut -d ' ' -f 1`
++    DEL_NAME=`echo $ENTRY | cut -d ' ' -f 2`
++    DEL_FILE=`echo $META_FILE | sed -e "s/$META_NAME/$DEL_NAME/" | sed -e 's/^\.\///'`
++    grep -x $DEL_FILE $TMP/$SKIP_DEL_LIST &> /dev/null
++    if [ $? -ne 0 ]; then
++	pushd $BASE &> /dev/null
++	COMMAND="rm -rf $DEL_FILE"; exec_command
++	popd &> /dev/null
++    else
++	echo "  excluding: $DEL_FILE as in skip-del-list."
++    fi
++done
++
++# create all dirs and update permissions
++echo -e "\nSetting up directory structures in base file system..."
++find . -type d | sed -e 's/^\.\///' | while read DIR; do
++    PERMS=`stat -c %a $DIR`
++    DIR_UID=`stat -c %u $DIR`
++    DIR_GID=`stat -c %g $DIR`
++    pushd $BASE &> /dev/null
++    if ! [ -d $DIR ]; then
++	COMMAND="mkdir -p $DIR"; exec_command
++    fi
++    COMMAND="chmod $PERMS $DIR"; exec_command
++    COMMAND="chown $DIR_UID:$DIR_GID $DIR"; exec_command
++    popd &> /dev/null
++done
++
++# merge all non-directory files
++echo -e "\nMerging all non-directory files...."
++for i in b c p f l s; do
++    find . -type $i | sed -e 's/^\.\///' | grep -v "$META_NAME" | while read FILE; do
++	pushd $BASE #&> /dev/null
++	COMMAND="cp -df $STO/$FILE $BASE/$FILE"; exec_command
++	popd &> /dev/null
++    done
++done
++popd &> /dev/null
++
++#rm $TMP/$SKIP_DEL_LIST
++
++echo "Done!"
+--- /dev/null
++++ b/fs/mini_fo/mini_fo-overlay
+@@ -0,0 +1,130 @@
++#!/bin/bash
++#
++# Copyright (C) 2005 Markus Klotzbuecher <mk@creamnet.de>
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License
++# as published by the Free Software Foundation; either version
++# 2 of the License, or (at your option) any later version.
++#
++
++HELP=
++SUFF=
++MNTP=
++MNT_DIR="/mnt"
++STO=
++STO_DIR="/tmp"
++BASE=
++
++usage()
++{
++cat <<EOF
++
++Usage: $0 [-s suffix] [-d sto_dir_dir] [-m mount point] base_dir
++Version 0.1
++
++This script overlays the given base directory using the mini_fo file
++system. If only the base directory base_dir is given, $0
++will use a storage directory called "sto-<base_dir_name>" in $STO_DIR,
++and mount point "mini_fo-<base_dir_dir>" in $MNT_DIR.
++
++Options:
++     -s <suffix>
++          add given suffix to storage directory and the mount
++          point. This is usefull for overlaying one base directory
++          several times and avoiding conflicts with storage directory
++          names and mount points.
++
++     -d <sto_dir_dir>
++          change the directory in which the storage directory will be
++          created (default is currently "$STO_DIR".
++
++     -m <mount point>
++          use an alternative directory to create the mini_fo
++          mountpoint (default is currently "$MNT_DIR".
++
++     -h   displays this message.
++
++EOF
++exit 1;
++}
++
++while getopts hm:s:d: OPTS
++  do
++  case $OPTS in
++      s)  SUFF="$OPTARG";;
++      d)  STO_DIR="$OPTARG";;
++      m)  MNT_DIR="$OPTARG";;
++      h)  HELP="set";;
++      ?)  usage
++	  exit 1;;
++  esac
++done
++shift $(($OPTIND - 1))
++
++BASE="$1"
++
++if [ "x$HELP" == "xset" ]; then
++    usage
++    exit -1
++fi
++
++# fix suffix
++if [ "x$SUFF" != "x" ]; then
++    SUFF="-$SUFF"
++fi
++
++# kill trailing slashes
++MNT_DIR=${MNT_DIR%/}
++STO_DIR=${STO_DIR%/}
++BASE=${BASE%/}
++
++
++if ! [ -d "$BASE" ]; then
++    echo "invalid base dir $BASE, run $0 -h for help."
++    exit -1
++fi
++
++# check opts
++if ! [ -d "$MNT_DIR" ]; then
++    echo "invalid mount dir $MNT_DIR, run $0 -h for help."
++    exit -1
++fi
++
++if ! [ -d "$STO_DIR" ]; then
++    echo "invalid sto_dir_dir $STO_DIR, run $0 -h for help."
++    exit -1
++fi
++
++MNTP="$MNT_DIR/mini_fo-`basename $BASE`$SUFF"
++STO="$STO_DIR/sto-`basename $BASE`$SUFF"
++
++# create the mount point if it doesn't exist
++mkdir -p $MNTP
++if [ $? -ne 0 ]; then
++    echo "Error, failed to create mount point $MNTP"
++fi
++
++mkdir -p $STO
++if [ $? -ne 0 ]; then
++    echo "Error, failed to create storage dir $STO"
++fi
++
++# check if fs is already mounted
++mount | grep mini_fo | grep $MNTP &> /dev/null
++if [ $? -eq 0 ]; then
++    echo "Error, existing mini_fo mount at $MNTP."
++    exit -1
++fi
++
++mount | grep mini_fo | grep $STO &> /dev/null
++if [ $? -eq 0 ]; then
++    echo "Error, $STO seems to be used already."
++    exit -1
++fi
++
++# mount
++mount -t mini_fo -o base=$BASE,sto=$STO $BASE $MNTP
++
++if [ $? -ne 0 ]; then
++    echo "Error, mounting failed, maybe no permisson to mount?"
++fi
+--- /dev/null
++++ b/fs/mini_fo/mmap.c
+@@ -0,0 +1,637 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif /* HAVE_CONFIG_H */
++
++#include "fist.h"
++#include "mini_fo.h"
++
++
++#ifdef FIST_COUNT_WRITES
++/* for counting writes in the middle vs. regular writes */
++unsigned long count_writes = 0, count_writes_middle = 0;
++#endif /* FIST_COUNT_WRITES */
++
++/* forward declaration of commit write and prepare write */
++STATIC int mini_fo_commit_write(file_t *file, page_t *page, unsigned from, unsigned to);
++STATIC int mini_fo_prepare_write(file_t *file, page_t *page, unsigned from, unsigned to);
++
++
++/*
++ * Function for handling creation of holes when lseek-ing past the
++ * end of the file and then writing some data.
++ */
++int
++mini_fo_fill_zeros(file_t* file, page_t *page, unsigned from)
++{
++	int err = 0;
++	dentry_t *dentry = file->f_dentry;
++	inode_t *inode = dentry->d_inode;
++	page_t *tmp_page;
++	int index;
++
++	print_entry_location();
++
++	for (index = inode->i_size >> PAGE_CACHE_SHIFT; index < page->index; index++) {
++		tmp_page = mini_fo_get1page(file, index);
++		if (IS_ERR(tmp_page)) {
++			err = PTR_ERR(tmp_page);
++			goto out;
++		}
++
++		/*
++		 * zero out rest of the contents of the page between the appropriate
++		 * offsets.
++		 */
++		memset((char*)page_address(tmp_page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, PAGE_CACHE_SIZE - (inode->i_size & ~PAGE_CACHE_MASK));
++
++		if (! (err = mini_fo_prepare_write(file, tmp_page, 0, PAGE_CACHE_SIZE)))
++			err = mini_fo_commit_write(file, tmp_page, 0, PAGE_CACHE_SIZE);
++
++		page_cache_release(tmp_page);
++		if (err < 0)
++			goto out;
++		if (current->need_resched)
++			schedule();
++	}
++
++	/* zero out appropriate parts of last page */
++
++	/*
++	 * if the encoding type is block, then adjust the 'from' (where the
++	 * zeroing will start) offset appropriately
++	 */
++	from = from & (~(FIST_ENCODING_BLOCKSIZE - 1));
++
++	if ((from - (inode->i_size & ~PAGE_CACHE_MASK)) > 0) {
++
++		memset((char*)page_address(page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, from - (inode->i_size & ~PAGE_CACHE_MASK));
++		if (! (err = mini_fo_prepare_write(file, page, 0, PAGE_CACHE_SIZE)))
++			err = mini_fo_commit_write(file, page, 0, PAGE_CACHE_SIZE);
++
++		if (err < 0)
++			goto out;
++		if (current->need_resched)
++			schedule();
++	}
++
++ out:
++	print_exit_status(err);
++	return err;
++}
++
++
++
++STATIC int
++mini_fo_writepage(page_t *page)
++{
++	int err = -EIO;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	page_t *hidden_page;
++	char *kaddr, *hidden_kaddr;
++
++	print_entry_location();
++
++	inode = page->mapping->host;
++	hidden_inode = itohi(inode);
++
++	/*
++	 * writepage is called when shared mmap'ed files need to write
++	 * their pages, while prepare/commit_write are called from the
++	 * non-paged write() interface.  (However, in 2.3 the two interfaces
++	 * share the same cache, while in 2.2 they didn't.)
++	 *
++	 * So we pretty much have to duplicate much of what commit_write does.
++	 */
++
++	/* find lower page (returns a locked page) */
++	hidden_page = grab_cache_page(hidden_inode->i_mapping, page->index);
++	if (!hidden_page)
++		goto out;
++
++	/* get page address, and encode it */
++	kaddr = (char *) kmap(page);
++	hidden_kaddr = (char*) kmap(hidden_page);
++	mini_fo_encode_block(kaddr, hidden_kaddr, PAGE_CACHE_SIZE, inode, inode->i_sb, page->index);
++	/* if encode_block could fail, then return error */
++	kunmap(page);
++	kunmap(hidden_page);
++
++	/* call lower writepage (expects locked page) */
++	err = hidden_inode->i_mapping->a_ops->writepage(hidden_page);
++
++	/*
++	 * update mtime and ctime of lower level file system
++	 * mini_fo' mtime and ctime are updated by generic_file_write
++	 */
++	hidden_inode->i_mtime = hidden_inode->i_ctime = CURRENT_TIME;
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,1)
++	UnlockPage(hidden_page);	/* b/c grab_cache_page locked it */
++# endif /* kernel older than 2.4.1 */
++	page_cache_release(hidden_page); /* b/c grab_cache_page increased refcnt */
++
++	if (err)
++		ClearPageUptodate(page);
++	else
++		SetPageUptodate(page);
++ out:
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,1)
++	UnlockPage(page);
++# endif /* kernel 2.4.1 and newer */
++	print_exit_status(err);
++	return err;
++}
++
++
++/*
++ * get one page from cache or lower f/s, return error otherwise.
++ * returns unlocked, up-to-date page (if ok), with increased refcnt.
++ */
++page_t *
++mini_fo_get1page(file_t *file, int index)
++{
++	page_t *page;
++	dentry_t *dentry;
++	inode_t *inode;
++	struct address_space *mapping;
++	int err;
++
++	print_entry_location();
++
++	dentry = file->f_dentry; /* CPW: Moved below print_entry_location */
++	inode = dentry->d_inode;
++	mapping = inode->i_mapping;
++
++	fist_dprint(8, "%s: read page index %d pid %d\n", __FUNCTION__, index, current->pid);
++	if (index < 0) {
++		printk("%s BUG: index=%d\n", __FUNCTION__, index);
++		page = ERR_PTR(-EIO);
++		goto out;
++	}
++	page = read_cache_page(mapping,
++			       index,
++			       (filler_t *) mapping->a_ops->readpage,
++			       (void *) file);
++	if (IS_ERR(page))
++		goto out;
++	wait_on_page(page);
++	if (!Page_Uptodate(page)) {
++		lock_page(page);
++		err = mapping->a_ops->readpage(file, page);
++		if (err) {
++			page = ERR_PTR(err);
++			goto out;
++		}
++		wait_on_page(page);
++		if (!Page_Uptodate(page)) {
++			page = ERR_PTR(-EIO);
++			goto out;
++		}
++	}
++
++ out:
++	print_exit_pointer(page);
++	return page;
++}
++
++
++/*
++ * get one page from cache or lower f/s, return error otherwise.
++ * similar to get1page, but doesn't guarantee that it will return
++ * an unlocked page.
++ */
++page_t *
++mini_fo_get1page_cached(file_t *file, int index)
++{
++	page_t *page;
++	dentry_t *dentry;
++	inode_t *inode;
++	struct address_space *mapping;
++	int err;
++
++	print_entry_location();
++
++	dentry = file->f_dentry; /* CPW: Moved below print_entry_location */
++	inode = dentry->d_inode;
++	mapping = inode->i_mapping;
++
++	fist_dprint(8, "%s: read page index %d pid %d\n", __FUNCTION__, index, current->pid);
++	if (index < 0) {
++		printk("%s BUG: index=%d\n", __FUNCTION__, index);
++		page = ERR_PTR(-EIO);
++		goto out;
++	}
++	page = read_cache_page(mapping,
++			       index,
++			       (filler_t *) mapping->a_ops->readpage,
++			       (void *) file);
++	if (IS_ERR(page))
++		goto out;
++
++ out:
++	print_exit_pointer(page);
++	return page;
++}
++
++
++/*
++ * readpage is called from generic_page_read and the fault handler.
++ * If your file system uses generic_page_read for the read op, it
++ * must implement readpage.
++ *
++ * Readpage expects a locked page, and must unlock it.
++ */
++STATIC int
++mini_fo_do_readpage(file_t *file, page_t *page)
++{
++	int err = -EIO;
++	dentry_t *dentry;
++	file_t *hidden_file = NULL;
++	dentry_t *hidden_dentry;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	char *page_data;
++	page_t *hidden_page;
++	char *hidden_page_data;
++	int real_size;
++
++	print_entry_location();
++
++	dentry = file->f_dentry; /* CPW: Moved below print_entry_location */
++	if (ftopd(file) != NULL)
++		hidden_file = ftohf(file);
++	hidden_dentry = dtohd(dentry);
++	inode = dentry->d_inode;
++	hidden_inode = itohi(inode);
++
++	fist_dprint(7, "%s: requesting page %d from file %s\n", __FUNCTION__, page->index, dentry->d_name.name);
++
++	MALLOC_PAGE_POINTERS(hidden_pages, num_hidden_pages);
++	MALLOC_PAGEDATA_POINTERS(hidden_pages_data, num_hidden_pages);
++	FOR_EACH_PAGE
++		CURRENT_HIDDEN_PAGE = NULL;
++
++	/* find lower page (returns a locked page) */
++	FOR_EACH_PAGE {
++		fist_dprint(8, "%s: Current page index = %d\n", __FUNCTION__, CURRENT_HIDDEN_PAGEINDEX);
++		CURRENT_HIDDEN_PAGE = read_cache_page(hidden_inode->i_mapping,
++						      CURRENT_HIDDEN_PAGEINDEX,
++						      (filler_t *) hidden_inode->i_mapping->a_ops->readpage,
++						      (void *) hidden_file);
++		if (IS_ERR(CURRENT_HIDDEN_PAGE)) {
++			err = PTR_ERR(CURRENT_HIDDEN_PAGE);
++			CURRENT_HIDDEN_PAGE = NULL;
++			goto out_release;
++		}
++	}
++
++	/*
++	 * wait for the page data to show up
++	 * (signaled by readpage as unlocking the page)
++	 */
++	FOR_EACH_PAGE {
++		wait_on_page(CURRENT_HIDDEN_PAGE);
++		if (!Page_Uptodate(CURRENT_HIDDEN_PAGE)) {
++			/*
++			 * call readpage() again if we returned from wait_on_page with a
++			 * page that's not up-to-date; that can happen when a partial
++			 * page has a few buffers which are ok, but not the whole
++			 * page.
++			 */
++			lock_page(CURRENT_HIDDEN_PAGE);
++			err = hidden_inode->i_mapping->a_ops->readpage(hidden_file,
++								       CURRENT_HIDDEN_PAGE);
++			if (err) {
++				CURRENT_HIDDEN_PAGE = NULL;
++				goto out_release;
++			}
++			wait_on_page(CURRENT_HIDDEN_PAGE);
++			if (!Page_Uptodate(CURRENT_HIDDEN_PAGE)) {
++				err = -EIO;
++				goto out_release;
++			}
++		}
++	}
++
++	/* map pages, get their addresses */
++	page_data = (char *) kmap(page);
++	FOR_EACH_PAGE
++		CURRENT_HIDDEN_PAGEDATA = (char *) kmap(CURRENT_HIDDEN_PAGE);
++
++	/* if decode_block could fail, then return error */
++	err = 0;
++	real_size = hidden_inode->i_size - (page->index << PAGE_CACHE_SHIFT);
++	if (real_size <= 0)
++		memset(page_data, 0, PAGE_CACHE_SIZE);
++	else if (real_size < PAGE_CACHE_SIZE) {
++		mini_fo_decode_block(hidden_page_data, page_data, real_size, inode, inode->i_sb, page->index);
++		memset(page_data + real_size, 0, PAGE_CACHE_SIZE - real_size);
++	} else
++		mini_fo_decode_block(hidden_page_data, page_data, PAGE_CACHE_SIZE, inode, inode->i_sb, page->index);
++
++	FOR_EACH_PAGE
++		kunmap(CURRENT_HIDDEN_PAGE);
++	kunmap(page);
++
++ out_release:
++	FOR_EACH_PAGE
++		if (CURRENT_HIDDEN_PAGE)
++			page_cache_release(CURRENT_HIDDEN_PAGE); /* undo read_cache_page */
++
++	FREE_PAGE_POINTERS(hidden_pages, num_hidden_pages);
++	FREE_PAGEDATA_POINTERS(hidden_pages_data, num_hidden_pages);
++
++ out:
++	if (err == 0)
++		SetPageUptodate(page);
++	else
++		ClearPageUptodate(page);
++
++	print_exit_status(err);
++	return err;
++}
++
++
++STATIC int
++mini_fo_readpage(file_t *file, page_t *page)
++{
++	int err;
++	print_entry_location();
++
++	err = mini_fo_do_readpage(file, page);
++
++	/*
++	 * we have to unlock our page, b/c we _might_ have gotten a locked page.
++	 * but we no longer have to wakeup on our page here, b/c UnlockPage does
++	 * it
++	 */
++	UnlockPage(page);
++
++	print_exit_status(err);
++	return err;
++}
++
++
++STATIC int
++mini_fo_prepare_write(file_t *file, page_t *page, unsigned from, unsigned to)
++{
++	int err = 0;
++
++	print_entry_location();
++
++	/*
++	 * we call kmap(page) only here, and do the kunmap
++	 * and the actual downcalls, including unlockpage and uncache
++	 * in commit_write.
++	 */
++	kmap(page);
++
++	/* fast path for whole page writes */
++	if (from == 0 && to == PAGE_CACHE_SIZE)
++		goto out;
++	/* read the page to "revalidate" our data */
++	/* call the helper function which doesn't unlock the page */
++	if (!Page_Uptodate(page))
++		err = mini_fo_do_readpage(file, page);
++
++ out:
++	print_exit_status(err);
++	return err;
++}
++
++
++
++STATIC int
++mini_fo_commit_write(file_t *file, page_t *page, unsigned from, unsigned to)
++{
++	int err = -ENOMEM;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	page_t *hidden_page;
++	file_t *hidden_file = NULL;
++	loff_t pos;
++	unsigned bytes = to - from;
++	unsigned hidden_from, hidden_to, hidden_bytes;
++
++	print_entry_location();
++
++	inode = page->mapping->host; /* CPW: Moved below print_entry_location */
++	hidden_inode = itohi(inode);
++
++	ASSERT(file != NULL);
++	/*
++	 * here we have a kmapped page, with data from the user copied
++	 * into it.  we need to encode_block it, and then call the lower
++	 * commit_write.  We also need to simulate same behavior of
++	 * generic_file_write, and call prepare_write on the lower f/s first.
++	 */
++#ifdef FIST_COUNT_WRITES
++	count_writes++;
++# endif /* FIST_COUNT_WRITES */
++
++	/* this is append and/or extend -- we can't have holes so fill them in */
++	if (page->index > (hidden_inode->i_size >> PAGE_CACHE_SHIFT)) {
++		page_t *tmp_page;
++		int index;
++		for (index = hidden_inode->i_size >> PAGE_CACHE_SHIFT; index < page->index; index++) {
++			tmp_page = mini_fo_get1page(file, index);
++			if (IS_ERR(tmp_page)) {
++				err = PTR_ERR(tmp_page);
++				goto out;
++			}
++			/* zero out the contents of the page at the appropriate offsets */
++			memset((char*)page_address(tmp_page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, PAGE_CACHE_SIZE - (inode->i_size & ~PAGE_CACHE_MASK));
++			if (!(err = mini_fo_prepare_write(file, tmp_page, 0, PAGE_CACHE_SIZE)))
++				err = mini_fo_commit_write(file, tmp_page, 0, PAGE_CACHE_SIZE);
++			page_cache_release(tmp_page);
++			if (err < 0)
++				goto out;
++			if (current->need_resched)
++				schedule();
++		}
++	}
++
++	if (ftopd(file) != NULL)
++		hidden_file = ftohf(file);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_inode->i_mutex);
++#else
++	down(&hidden_inode->i_sem);
++#endif
++	/* find lower page (returns a locked page) */
++	hidden_page = grab_cache_page(hidden_inode->i_mapping, page->index);
++	if (!hidden_page)
++		goto out;
++
++#if FIST_ENCODING_BLOCKSIZE > 1
++#  error encoding_blocksize greater than 1 is not yet supported
++# endif /* FIST_ENCODING_BLOCKSIZE > 1 */
++
++	hidden_from = from & (~(FIST_ENCODING_BLOCKSIZE - 1));
++	hidden_to = ((to + FIST_ENCODING_BLOCKSIZE - 1) & (~(FIST_ENCODING_BLOCKSIZE - 1)));
++	if ((page->index << PAGE_CACHE_SHIFT) + to > hidden_inode->i_size) {
++
++		/*
++		 * if this call to commit_write had introduced holes and the code
++		 * for handling holes was invoked, then the beginning of this page
++		 * must be zeroed out
++		 * zero out bytes from 'size_of_file%pagesize' to 'from'.
++		 */
++		if ((hidden_from - (inode->i_size & ~PAGE_CACHE_MASK)) > 0)
++			memset((char*)page_address(page) + (inode->i_size & ~PAGE_CACHE_MASK), 0, hidden_from - (inode->i_size & ~PAGE_CACHE_MASK));
++
++	}
++	hidden_bytes = hidden_to - hidden_from;
++
++	/* call lower prepare_write */
++	err = -EINVAL;
++	if (hidden_inode->i_mapping &&
++	    hidden_inode->i_mapping->a_ops &&
++	    hidden_inode->i_mapping->a_ops->prepare_write)
++		err = hidden_inode->i_mapping->a_ops->prepare_write(hidden_file,
++								    hidden_page,
++								    hidden_from,
++								    hidden_to);
++	if (err)
++		/* don't leave locked pages behind, esp. on an ENOSPC */
++		goto out_unlock;
++
++	fist_dprint(8, "%s: encoding %d bytes\n", __FUNCTION__, hidden_bytes);
++	mini_fo_encode_block((char *) page_address(page) + hidden_from, (char*) page_address(hidden_page) + hidden_from, hidden_bytes, inode, inode->i_sb, page->index);
++	/* if encode_block could fail, then goto unlock and return error */
++
++	/* call lower commit_write */
++	err = hidden_inode->i_mapping->a_ops->commit_write(hidden_file,
++							   hidden_page,
++							   hidden_from,
++							   hidden_to);
++
++	if (err < 0)
++		goto out_unlock;
++
++	err = bytes;	/* convert error to no. of bytes */
++
++	inode->i_blocks = hidden_inode->i_blocks;
++	/* we may have to update i_size */
++	pos = (page->index << PAGE_CACHE_SHIFT) + to;
++	if (pos > inode->i_size)
++		inode->i_size = pos;
++
++	/*
++	 * update mtime and ctime of lower level file system
++	 * mini_fo' mtime and ctime are updated by generic_file_write
++	 */
++	hidden_inode->i_mtime = hidden_inode->i_ctime = CURRENT_TIME;
++
++	mark_inode_dirty_sync(inode);
++
++ out_unlock:
++	UnlockPage(hidden_page);
++	page_cache_release(hidden_page);
++	kunmap(page);		/* kmap was done in prepare_write */
++ out:
++	/* we must set our page as up-to-date */
++	if (err < 0)
++		ClearPageUptodate(page);
++	else
++		SetPageUptodate(page);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_inode->i_mutex);
++#else
++	up(&hidden_inode->i_sem);
++#endif
++	print_exit_status(err);
++	return err;			/* assume all is ok */
++}
++
++
++STATIC int
++mini_fo_bmap(struct address_space *mapping, long block)
++{
++	int err = 0;
++	inode_t *inode;
++	inode_t *hidden_inode;
++
++	print_entry_location();
++
++	inode = (inode_t *) mapping->host;
++	hidden_inode = itohi(inode);
++
++	if (hidden_inode->i_mapping->a_ops->bmap)
++		err = hidden_inode->i_mapping->a_ops->bmap(hidden_inode->i_mapping, block);
++	print_exit_location();
++	return err;
++}
++
++
++/*
++ * This function is copied verbatim from mm/filemap.c.
++ * XXX: It should be simply moved to some header file instead -- bug Al about it!
++ */
++static inline int sync_page(struct page *page)
++{
++	struct address_space *mapping = page->mapping;
++
++	if (mapping && mapping->a_ops && mapping->a_ops->sync_page)
++		return mapping->a_ops->sync_page(page);
++	return 0;
++}
++
++
++/*
++ * XXX: we may not need this function if not FIST_FILTER_DATA.
++ * FIXME: for FIST_FILTER_SCA, get all lower pages and sync them each.
++ */
++STATIC int
++mini_fo_sync_page(page_t *page)
++{
++	int err = 0;
++	inode_t *inode;
++	inode_t *hidden_inode;
++	page_t *hidden_page;
++
++	print_entry_location();
++
++	inode = page->mapping->host; /* CPW: Moved below print_entry_location */
++	hidden_inode = itohi(inode);
++
++	/* find lower page (returns a locked page) */
++	hidden_page = grab_cache_page(hidden_inode->i_mapping, page->index);
++	if (!hidden_page)
++		goto out;
++
++	err = sync_page(hidden_page);
++
++	UnlockPage(hidden_page);	/* b/c grab_cache_page locked it */
++	page_cache_release(hidden_page); /* b/c grab_cache_page increased refcnt */
++
++ out:
++	print_exit_status(err);
++	return err;
++}
+--- /dev/null
++++ b/fs/mini_fo/README
+@@ -0,0 +1,163 @@
++README for the mini_fo overlay file system
++=========================================
++
++
++WHAT IS MINI_FO?
++----------------
++
++mini_fo is a virtual kernel file system that can make read-only
++file systems writable. This is done by redirecting modifying operations
++to a writeable location called "storage directory", and leaving the
++original data in the "base directory" untouched. When reading, the
++file system merges the modifed and original data so that only the
++newest versions will appear. This occurs transparently to the user,
++who can access the data like on any other read-write file system.
++
++Base and storage directories may be located on the same or on
++different partitions and may be of different file system types. While
++the storage directory obviously needs to be writable, the base may or
++may not be writable, what doesn't matter as it will no be modified
++anyway.
++
++
++WHAT IS GOOD FOR?
++-----------------
++
++The primary purpose of the mini_fo file system is to allow easy
++software updates to embedded systems, that often store their root
++file system in a read-only flash file system, but there are many
++more as for example sandboxing, or for allowing live-cds to
++permanently store information.
++
++
++BUILDING
++--------
++This should be simple. Adjust the Makefile to point to the correct
++kernel headers you want to build the module for. Then:
++
++    # make
++
++should build "mini_fo.o" for a 2.4 kernel or "mini_fo.ko" for a 2.6
++kernel.
++
++If you are building the module for you current kernel, you can install
++the module (as root):
++
++    # make install
++
++or uninstall with
++
++    # make uninstall
++
++
++USING THE FILE SYSTEM
++--------------------
++
++the general mount syntax is:
++
++   mount -t mini_fo -o base=<base directory>,sto=<storage directory>\
++                            <base directory> <mount point>
++
++Example:
++
++You have mounted a cdrom to /mnt/cdrom and want to modifiy some files
++on it:
++
++load the module (as root)
++
++    # insmod mini_fo.o for a 2.4 kernel or
++
++    # insmod mini_fo.ko for a 2.6 kernel
++
++
++create a storage dir in tmp and a mountpoint for mini_fo:
++
++    # mkdir /tmp/sto
++    # mkdir /mnt/mini_fo
++
++and mount the mini_fo file system:
++
++    # mount -t mini_fo -o base=/mnt/cdrom,sto=/tmp/sto /mnt/cdrom /mnt/mini_fo
++
++
++Now the data stored on the cd can be accessed via the mini_fo
++mountpoint just like any read-write file system, files can be modified
++and deleted, new ones can be created and so on. When done unmount the
++file system:
++
++    # unmount /mnt/mini_fo
++
++Note that if the file system is mounted again using the same storage
++file system, of course it will appear in the modified state again. If
++you remount it using an new empty storage directory, it will be
++unmodified. Therefore by executing:
++
++    # cd /tmp/sto
++    # rm -rf *
++
++you can nuke all the changes you made to the original file system. But
++ remember NEVER do this while the mini_fo file system is mounted!
++
++
++Alternatively you can use the mini_fo-overlay bash script, that
++simplifies managing mini_fo mounts. See TOOLS Section.
++
++
++TOOLS
++-----
++
++mini_fo-merge (experimental):
++
++This is a bash script that will merge changes contained in the storage
++directory back to the base directory. This allows mini_fo to function
++as a cache file system by overlaying a slow (network, ...) file system
++and using a fast (ramdisk, ...) as storage. When done, changes can be
++merged back to the (slow) base with mini_fo-merge. See "mini_fo-merge
++-h" for details.
++
++It can be usefull for merging changes back after a successfull test
++(patches, software updates...)
++
++
++mini_fo-overlay:
++
++This bash script simplifies managing one or more mini_fo mounts. For
++overlaying a directory called "basedir1", you can just call:
++
++    # mini_fo-overlay basedir1
++
++This will mount mini_fo with "basedir1" as base, "/tmp/sto-basedir1/"
++as storage to "/mnt/mini_fo-basedir1/". It has more options though,
++type "mini_fo-overlay -h" for details.
++
++
++DOCUMENTATION, REPORTING BUGS, GETTING HELP
++-------------------------------------------
++
++Please visit the mini_fo project page at:
++
++http://www.denx.de/twiki/bin/view/Know/MiniFOHome
++
++
++WARNINGS
++--------
++
++Never modify the base or the storage directorys while the mini_fo
++file system is mounted, or you might crash you system. Simply accessing
++and reading should not cause any trouble.
++
++Exporting a mini_fo mount point via NFS has not been tested, and may
++or may not work.
++
++Check the RELEASE_NOTES for details on bugs and features.
++
++
++
++Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++
++This program is free software; you can redistribute it and/or
++modify it under the terms of the GNU General Public License
++as published by the Free Software Foundation; either version
++2 of the License, or (at your option) any later version.
++
++
+--- /dev/null
++++ b/fs/mini_fo/RELEASE_NOTES
+@@ -0,0 +1,111 @@
++Release:	mini_fo-0.6.1 (v0-6-1)
++Date:		21.09.2005
++
++
++Changes:
++--------
++v0-6-1:
++
++- bugfixes (see ChangeLog)
++
++- two helper scripts "mini_fo_merge" and "mini_fo_overlay" (see
++  README for details).
++
++v0-6-0:
++
++- Support for 2.4 and 2.6 (see Makefile)
++
++- Partial hard link support (creating works as expected, but already
++  existing links in the base file system will be treated as if they
++  were individual files).
++
++- Various bugfixes and cleanups.
++
++
++v0-6-0-pre1:
++
++- This is mini_fo-0-6-0-pre1! This release is a complete rewrite of
++  many vital mini_fo parts such as the old whiteout list code which
++  has been replaced by the new META subsystem.
++
++- Light weight directory renaming implemented. This means if a
++  directory is renamed via the mini_fo filesystem this will no longer
++  result in a complete copy in storage, instead only one empty
++  directory will be created. All base filed contained in the original
++  directory stay there until modified.
++
++- Special files (creating, renaming, deleting etc.) now working.
++
++- Many bugfixes and cleanup, mini_fo is now a lot more stable.
++
++
++v0-5-10:
++
++- Final release of the 0-5-* versions. Next will be a complete rewrite
++  of many features. This release contains several bugfixes related to
++  directory renaming.
++
++
++v0-5-10-pre6:
++
++- Lots of cleanup and several bugfixes related to directory deleting
++
++- Directory renaming suddenly works, what is most likely due to the
++  fact tha that "mv" is smart: if the classic rename doesn't work it
++  will assume that source and target file are on different fs and will
++  copy the directory and try to remove the source directory. Until
++  directory removing wasn't implemented, it would fail to do this and
++  rollback.
++  So, directory renaming works for now, but it doesn't yet do what you
++  would expect from a overlay fs, so use with care.
++
++
++v0-5-10-pre5:
++
++- implemented directory deleting
++- made parsing of mount options more stable
++- New format of mount options! (See README)
++- I can't reproduce the unknown panic with 2.4.25 anymore, so I'll
++  happily assume it never existed!
++
++
++Implemented features:
++---------------------
++
++- creating hard links (see BUGS on already existing hard links)
++- lightweight directory renaming
++- renaming device files, pipes, sockets, etc.
++- creating, renaming, deleting of special files
++- deleting directorys
++- general directory reading (simple "ls" )
++- creating files in existing directorys
++- creating directorys
++- renaming files.
++- reading and writing files (involves opening)
++- appending to files (creates copy in storage)
++- deleting files
++- llseek works too, what allows editors to work
++- persistency (a deleted file stay deleted over remounts)
++- use of symbolic links
++- creating of device files
++
++
++Not (yet) implemented features:
++-------------------------------
++
++- full hard link support.
++
++
++
++BUGS:
++-----
++
++Hard links in the base file system will be treated as individual
++files, not as links to one inode.
++
++The main problem with hard links isn't allowing to create them, but
++their pure existence. If you modify a base hard link, the changes made
++will only show up on this link, the other link will remain in the
++original state. I hope to fix this someday. Please note that this does
++not effect the special hard links '.' and '..', that are handled
++seperately by the lower fs.
+--- /dev/null
++++ b/fs/mini_fo/state.c
+@@ -0,0 +1,620 @@
++/*
++ * Copyright (C) 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif /* HAVE_CONFIG_H */
++
++#include "fist.h"
++#include "mini_fo.h"
++
++
++/* create the storage file, setup new states */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++int create_sto_reg_file(dentry_t *dentry, int mode, struct nameidata *nd)
++#else
++int create_sto_reg_file(dentry_t *dentry, int mode)
++#endif
++{
++	int err = 0;
++	inode_t *dir;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++
++	if(exists_in_storage(dentry)) {
++		printk(KERN_CRIT "mini_fo: create_sto_file: wrong type or state.\n");
++		err = -EINVAL;
++		goto out;
++	}
++	err = get_neg_sto_dentry(dentry);
++
++	if (err) {
++		printk(KERN_CRIT "mini_fo: create_sto_file: ERROR getting neg. sto dentry.\n");
++		goto out;
++	}
++
++	dir = dentry->d_parent->d_inode;
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* lock parent */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++        down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = PTR_ERR(hidden_sto_dir_dentry);
++        if (IS_ERR(hidden_sto_dir_dentry))
++                goto out;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	err = vfs_create(hidden_sto_dir_dentry->d_inode,
++			 hidden_sto_dentry,
++			 mode, nd);
++#else
++	err = vfs_create(hidden_sto_dir_dentry->d_inode,
++			 hidden_sto_dentry,
++			 mode);
++#endif
++        if(err) {
++		printk(KERN_CRIT "mini_fo: create_sto_file: ERROR creating sto file.\n");
++                goto out_lock;
++	}
++
++	if(!dtohd2(dentry)->d_inode) {
++		printk(KERN_CRIT "mini_fo: create_sto_file: ERROR creating sto file [2].\n");
++                err = -EINVAL;
++                goto out_lock;
++        }
++
++        /* interpose the new inode */
++        if(dtost(dentry) == DELETED) {
++                dtost(dentry) = DEL_REWRITTEN;
++                err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0);
++                if(err)
++                        goto out_lock;
++        }
++        else if(dtost(dentry) == NON_EXISTANT) {
++                dtost(dentry) = CREATED;
++                err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0);
++                if(err)
++                        goto out_lock;
++        }
++        else if(dtost(dentry) == UNMODIFIED) {
++                dtost(dentry) = MODIFIED;
++                /* interpose on new inode */
++                if(itohi2(dentry->d_inode) != NULL) {
++                        printk(KERN_CRIT "mini_fo: create_sto_file: invalid inode detected.\n");
++                        err = -EINVAL;
++                        goto out_lock;
++                }
++                itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++	}
++	fist_copy_attr_timesizes(dentry->d_parent->d_inode,
++				 hidden_sto_dir_dentry->d_inode);
++
++ out_lock:
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++        dput(hidden_sto_dir_dentry);
++ out:
++	return err;
++}
++
++/* create the sto dir, setup states */
++int create_sto_dir(dentry_t *dentry, int mode)
++{
++	int err = 0;
++	inode_t *dir;
++	dentry_t *hidden_sto_dentry;
++        dentry_t *hidden_sto_dir_dentry;
++
++	/* had to take the "!S_ISDIR(mode))" check out, because it failed */
++	if(exists_in_storage(dentry)) {
++                printk(KERN_CRIT "mini_fo: create_sto_dir: wrong type or state.\\
++n");
++                err = -EINVAL;
++                goto out;
++        }
++
++	err = get_neg_sto_dentry(dentry);
++	if(err) {
++		err = -EINVAL;
++		goto out;
++	}
++
++	dir = dentry->d_parent->d_inode;
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = PTR_ERR(hidden_sto_dir_dentry);
++	if (IS_ERR(hidden_sto_dir_dentry))
++		goto out;
++
++	err = vfs_mkdir(hidden_sto_dir_dentry->d_inode,
++			hidden_sto_dentry,
++			mode);
++	if(err) {
++		printk(KERN_CRIT "mini_fo: create_sto_dir: ERROR creating sto dir.\n");
++		goto out_lock;
++	}
++
++	if(!dtohd2(dentry)->d_inode) {
++		printk(KERN_CRIT "mini_fo: create_sto_dir: ERROR creating sto dir [2].\n");
++		err = -EINVAL;
++		goto out_lock;
++	}
++
++	/* interpose the new inode */
++	if(dtost(dentry) == DELETED) {
++		dtost(dentry) = DEL_REWRITTEN;
++		err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0);
++		if(err)
++			goto out_lock;
++	}
++	else if(dtopd(dentry)->state == NON_EXISTANT) {
++		dtopd(dentry)->state = CREATED;
++		err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0);
++		if(err)
++			goto out_lock;
++	}
++	else if(dtopd(dentry)->state == UNMODIFIED) {
++		dtopd(dentry)->state = MODIFIED;
++		/* interpose on new inode */
++		if(itohi2(dentry->d_inode) != NULL) {
++			printk(KERN_CRIT "mini_fo:  create_sto_dir: ERROR, invalid inode detected.\n");
++			err = -EINVAL;
++			goto out_lock;
++		}
++		itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++	}
++
++	fist_copy_attr_timesizes(dir, hidden_sto_dir_dentry->d_inode);
++
++	/* initalize the wol list */
++	itopd(dentry->d_inode)->deleted_list_size = -1;
++	itopd(dentry->d_inode)->renamed_list_size = -1;
++	meta_build_lists(dentry);
++
++
++ out_lock:
++	/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++ out:
++	return err;
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++int create_sto_nod(dentry_t *dentry, int mode, dev_t dev)
++#else
++int create_sto_nod(dentry_t *dentry, int mode, int dev)
++#endif
++{
++	int err = 0;
++	inode_t *dir;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++
++	if(exists_in_storage(dentry)) {
++		err = -EEXIST;
++		goto out;
++	}
++	err = get_neg_sto_dentry(dentry);
++
++	if (err) {
++                printk(KERN_CRIT "mini_fo: create_sto_nod: ERROR getting neg. sto dentry.\n");
++                goto out;
++        }
++
++	dir = dentry->d_parent->d_inode;
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* lock parent */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = PTR_ERR(hidden_sto_dir_dentry);
++	if (IS_ERR(hidden_sto_dir_dentry))
++		goto out;
++
++	err = vfs_mknod(hidden_sto_dir_dentry->d_inode, hidden_sto_dentry, mode, dev);
++	if(err)
++		goto out_lock;
++
++	if(!dtohd2(dentry)->d_inode) {
++		printk(KERN_CRIT "mini_fo: create_sto_nod: creating storage inode failed [1].\n");
++		err = -EINVAL; /* return something indicating failure */
++		goto out_lock;
++	}
++
++	/* interpose the new inode */
++	if(dtost(dentry) == DELETED) {
++		dtost(dentry) = DEL_REWRITTEN;
++		err = mini_fo_tri_interpose(NULL, hidden_sto_dentry, dentry, dir->i_sb, 0);
++		if(err)
++			goto out_lock;
++	}
++	else if(dtost(dentry) == NON_EXISTANT) {
++		dtost(dentry) = CREATED;
++		err = mini_fo_tri_interpose(dtohd(dentry), hidden_sto_dentry, dentry, dir->i_sb, 0);
++		if(err)
++			goto out_lock;
++	}
++	else if(dtost(dentry) == UNMODIFIED) {
++		dtost(dentry) = MODIFIED;
++		/* interpose on new inode */
++		if(itohi2(dentry->d_inode) != NULL) {
++			printk(KERN_CRIT "mini_fo: create_sto_nod: error, invalid inode detected.\n");
++			err = -EINVAL;
++			goto out_lock;
++		}
++		itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++	}
++
++	fist_copy_attr_timesizes(dir, hidden_sto_dir_dentry->d_inode);
++
++ out_lock:
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++ out:
++	return err;
++}
++
++
++/* unimplemented (and possibly not usefull):
++
++   nondir-del_to_del_rew
++   nondir-non_exist_to_creat
++
++   dir-unmod_to_del
++   dir-mod_to_del
++   dir-creat_to_del
++   dir-del_rew_to_del
++   dir-del_to_del_rew
++   dir-non_exist_to_creat
++*/
++
++
++/* bring a file of any type from state UNMODIFIED to MODIFIED */
++int nondir_unmod_to_mod(dentry_t *dentry, int cp_flag)
++{
++	int err = 0;
++	struct vfsmount *tgt_mnt;
++	struct vfsmount *src_mnt;
++	dentry_t *tgt_dentry;
++	dentry_t *src_dentry;
++	dentry_t *hidden_sto_dentry;
++	dentry_t *hidden_sto_dir_dentry;
++
++	check_mini_fo_dentry(dentry);
++
++	if((dtost(dentry) != UNMODIFIED) ||
++	   S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++	err = get_neg_sto_dentry(dentry);
++
++	if (err) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                  ERROR getting neg. sto dentry.\n");
++		goto out;
++	}
++
++	/* create sto file */
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* lock parent */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++        down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	err = PTR_ERR(hidden_sto_dir_dentry);
++        if (IS_ERR(hidden_sto_dir_dentry))
++                goto out;
++
++	/* handle different types of nondirs */
++	if(S_ISCHR(dentry->d_inode->i_mode) ||
++	   S_ISBLK(dentry->d_inode->i_mode)) {
++		err = vfs_mknod(hidden_sto_dir_dentry->d_inode,
++				hidden_sto_dentry,
++				dtohd(dentry)->d_inode->i_mode,
++				dtohd(dentry)->d_inode->i_rdev);
++	}
++
++	else if(S_ISREG(dentry->d_inode->i_mode)) {
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++		err = vfs_create(hidden_sto_dir_dentry->d_inode,
++				 hidden_sto_dentry,
++				 dtohd(dentry)->d_inode->i_mode, NULL);
++#else
++		err = vfs_create(hidden_sto_dir_dentry->d_inode,
++				 hidden_sto_dentry,
++				 dtohd(dentry)->d_inode->i_mode);
++#endif
++	}
++        if(err) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                  ERROR creating sto file.\n");
++                goto out_lock;
++	}
++
++	/* interpose on new inode */
++	if(itohi2(dentry->d_inode) != NULL) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                  ERROR, invalid inode detected.\n");
++		err = -EINVAL;
++		goto out_lock;
++	}
++
++	itohi2(dentry->d_inode) = igrab(dtohd2(dentry)->d_inode);
++
++        fist_copy_attr_timesizes(dentry->d_parent->d_inode,
++				 hidden_sto_dir_dentry->d_inode);
++	dtost(dentry) = MODIFIED;
++
++	/* copy contents if regular file and cp_flag = 1 */
++	if((cp_flag == 1) && S_ISREG(dentry->d_inode->i_mode)) {
++
++		/* unlock first */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++		up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++		dput(hidden_sto_dir_dentry);
++
++		tgt_dentry = dtohd2(dentry);
++		tgt_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++		src_dentry = dtohd(dentry);
++		src_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt;
++
++		err = mini_fo_cp_cont(tgt_dentry, tgt_mnt,
++				      src_dentry, src_mnt);
++		if(err) {
++			printk(KERN_CRIT "mini_fo: nondir_unmod_to_mod: \
++                                          ERROR copying contents.\n");
++		}
++		goto out;
++	}
++
++ out_lock:
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++        dput(hidden_sto_dir_dentry);
++ out:
++	return err;
++}
++
++/* this function is currently identical to nondir_creat_to_del */
++int nondir_del_rew_to_del(dentry_t *dentry)
++{
++	return nondir_creat_to_del(dentry);
++}
++
++int nondir_creat_to_del(dentry_t *dentry)
++{
++	int err = 0;
++
++	inode_t *hidden_sto_dir_inode;
++	dentry_t *hidden_sto_dir_dentry;
++	dentry_t *hidden_sto_dentry;
++
++	check_mini_fo_dentry(dentry);
++
++	/* for now this function serves for both state DEL_REWRITTEN and
++	 * CREATED */
++	if(!(dtost(dentry) == CREATED || (dtost(dentry) == DEL_REWRITTEN)) ||
++	   S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: nondir_mod_to_del/del_rew_to_del: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++
++	hidden_sto_dir_inode = itohi2(dentry->d_parent->d_inode);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* was: hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry);*/
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	/* avoid destroying the hidden inode if the file is in use */
++	dget(hidden_sto_dentry);
++	err = vfs_unlink(hidden_sto_dir_inode, hidden_sto_dentry);
++	dput(hidden_sto_dentry);
++	if(!err)
++		d_delete(hidden_sto_dentry);
++
++	/* propagate number of hard-links */
++	dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++
++	dtost(dentry) = NON_EXISTANT;
++
++	/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++
++ out:
++	return err;
++}
++
++int nondir_mod_to_del(dentry_t *dentry)
++{
++	int err;
++	dentry_t *hidden_sto_dentry;
++	inode_t *hidden_sto_dir_inode;
++	dentry_t *hidden_sto_dir_dentry;
++
++	check_mini_fo_dentry(dentry);
++
++	if(dtost(dentry) != MODIFIED ||
++	   S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: nondir_mod_to_del: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++
++	hidden_sto_dir_inode = itohi2(dentry->d_parent->d_inode);
++	hidden_sto_dentry = dtohd2(dentry);
++
++	/* was hidden_sto_dir_dentry = lock_parent(hidden_sto_dentry); */
++	hidden_sto_dir_dentry = dget(hidden_sto_dentry->d_parent);
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	down(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++
++	/* avoid destroying the hidden inode if the file is in use */
++	dget(hidden_sto_dentry);
++	err = vfs_unlink(hidden_sto_dir_inode, hidden_sto_dentry);
++	dput(hidden_sto_dentry);
++	if(!err)
++		d_delete(hidden_sto_dentry);
++
++	/* propagate number of hard-links */
++	dentry->d_inode->i_nlink = itohi2(dentry->d_inode)->i_nlink;
++
++	/* dput base dentry, this will relase the inode and free the
++	 * dentry, as we will never need it again. */
++	dput(dtohd(dentry));
++	dtohd(dentry) = NULL;
++	dtost(dentry) = DELETED;
++
++	/* add deleted file to META-file */
++	meta_add_d_entry(dentry->d_parent,
++			 dentry->d_name.name,
++			 dentry->d_name.len);
++
++	/* was: unlock_dir(hidden_sto_dir_dentry); */
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
++	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++#else
++	up(&hidden_sto_dir_dentry->d_inode->i_sem);
++#endif
++	dput(hidden_sto_dir_dentry);
++
++ out:
++	return err;
++}
++
++int nondir_unmod_to_del(dentry_t *dentry)
++{
++	int err = 0;
++
++	check_mini_fo_dentry(dentry);
++
++	if(dtost(dentry) != UNMODIFIED ||
++	   S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: nondir_unmod_to_del: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++
++	 /* next we have to get a negative dentry for the storage file */
++	err = get_neg_sto_dentry(dentry);
++
++	if(err)
++		goto out;
++
++	/* add deleted file to META lists */
++	err = meta_add_d_entry(dentry->d_parent,
++			       dentry->d_name.name,
++			       dentry->d_name.len);
++
++	if(err)
++		goto out;
++
++	/* dput base dentry, this will relase the inode and free the
++	 * dentry, as we will never need it again. */
++	dput(dtohd(dentry));
++	dtohd(dentry) = NULL;
++	dtost(dentry) = DELETED;
++
++ out:
++	return err;
++}
++
++/* bring a dir from state UNMODIFIED to MODIFIED */
++int dir_unmod_to_mod(dentry_t *dentry)
++{
++	int err;
++
++	check_mini_fo_dentry(dentry);
++
++	if(dtost(dentry) != UNMODIFIED ||
++	   !S_ISDIR(dentry->d_inode->i_mode)) {
++		printk(KERN_CRIT "mini_fo: dir_unmod_to_mod: \
++                                  wrong type or state.\n");
++		err = -1;
++		goto out;
++	}
++
++	/* this creates our dir incl. sto. structure */
++	err = build_sto_structure(dentry->d_parent, dentry);
++	if(err) {
++		printk(KERN_CRIT "mini_fo: dir_unmod_to_mod: \
++                                  build_sto_structure failed.\n");
++		goto out;
++	}
++ out:
++	return err;
++}
++
+--- /dev/null
++++ b/fs/mini_fo/super.c
+@@ -0,0 +1,281 @@
++/*
++ * Copyright (c) 1997-2003 Erez Zadok
++ * Copyright (c) 2001-2003 Stony Brook University
++ *
++ * For specific licensing information, see the COPYING file distributed with
++ * this package, or get one from ftp://ftp.filesystems.org/pub/fist/COPYING.
++ *
++ * This Copyright notice must be kept intact and distributed with all
++ * fistgen sources INCLUDING sources generated by fistgen.
++ */
++/*
++ * Copyright (C) 2004, 2005 Markus Klotzbuecher <mk@creamnet.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ */
++
++/*
++ *  $Id$
++ */
++
++#ifdef HAVE_CONFIG_H
++# include <config.h>
++#endif
++
++#include "fist.h"
++#include "mini_fo.h"
++
++
++STATIC void
++mini_fo_read_inode(inode_t *inode)
++{
++	static struct address_space_operations mini_fo_empty_aops;
++
++	__itopd(inode) = kmalloc(sizeof(struct mini_fo_inode_info), GFP_KERNEL);
++	if (!itopd(inode)) {
++		printk("<0>%s:%s:%d: No kernel memory!\n", __FILE__, __FUNCTION__, __LINE__);
++		ASSERT(NULL);
++	}
++	itohi(inode) = NULL;
++	itohi2(inode) = NULL;
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++	inode->i_version++;
++#else
++	inode->i_version = ++event;	/* increment inode version */
++#endif
++	inode->i_op = &mini_fo_main_iops;
++	inode->i_fop = &mini_fo_main_fops;
++#if 0
++	/*
++	 * XXX: To export a file system via NFS, it has to have the
++	 * FS_REQUIRES_DEV flag, so turn it on.  But should we inherit it from
++	 * the lower file system, or can we allow our file system to be exported
++	 * even if the lower one cannot be natively exported.
++	 */
++	inode->i_sb->s_type->fs_flags |= FS_REQUIRES_DEV;
++	/*
++	 * OK, the above was a hack, which is now turned off because it may
++	 * cause a panic/oops on some systems.  The correct way to export a
++	 * "nodev" filesystem is via using nfs-utils > 1.0 and the "fsid=" export
++	 * parameter, which requires 2.4.20 or later.
++	 */
++#endif
++	/* I don't think ->a_ops is ever allowed to be NULL */
++	inode->i_mapping->a_ops = &mini_fo_empty_aops;
++}
++
++
++#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
++/*
++ * No need to call write_inode() on the lower inode, as it
++ * will have been marked 'dirty' anyway. But we might need
++ * to write some of our own stuff to disk.
++ */
++STATIC void
++mini_fo_write_inode(inode_t *inode, int sync)
++{
++	print_entry_location();
++	print_exit_location();
++}
++#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++
++
++STATIC void
++mini_fo_put_inode(inode_t *inode)
++{
++	/*
++	 * This is really funky stuff:
++	 * Basically, if i_count == 1, iput will then decrement it and this inode will be destroyed.
++	 * It is currently holding a reference to the hidden inode.
++	 * Therefore, it needs to release that reference by calling iput on the hidden inode.
++	 * iput() _will_ do it for us (by calling our clear_inode), but _only_ if i_nlink == 0.
++	 * The problem is, NFS keeps i_nlink == 1 for silly_rename'd files.
++	 * So we must for our i_nlink to 0 here to trick iput() into calling our clear_inode.
++	 */
++	if (atomic_read(&inode->i_count) == 1)
++		inode->i_nlink = 0;
++}
++
++
++#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
++/*
++ * we now define delete_inode, because there are two VFS paths that may
++ * destroy an inode: one of them calls clear inode before doing everything
++ * else that's needed, and the other is fine.  This way we truncate the inode
++ * size (and its pages) and then clear our own inode, which will do an iput
++ * on our and the lower inode.
++ */
++STATIC void
++mini_fo_delete_inode(inode_t *inode)
++{
++	print_entry_location();
++
++	fist_checkinode(inode, "mini_fo_delete_inode IN");
++	inode->i_size = 0;		/* every f/s seems to do that */
++	clear_inode(inode);
++
++	print_exit_location();
++}
++#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++
++
++/* final actions when unmounting a file system */
++STATIC void
++mini_fo_put_super(super_block_t *sb)
++{
++	if (stopd(sb)) {
++		mntput(stopd(sb)->hidden_mnt);
++		mntput(stopd(sb)->hidden_mnt2);
++
++		/* mk: no! dput(stopd(sb)->base_dir_dentry);
++		   dput(stopd(sb)->storage_dir_dentry); */
++
++		kfree(stopd(sb));
++		__stopd(sb) = NULL;
++	}
++}
++
++
++#ifdef NOT_NEEDED
++/*
++ * This is called in do_umount before put_super.
++ * The superblock lock is not held yet.
++ * We probably do not need to define this or call write_super
++ * on the hidden_sb, because sync_supers() will get to hidden_sb
++ * sooner or later.  But it is also called from file_fsync()...
++ */
++STATIC void
++mini_fo_write_super(super_block_t *sb)
++{
++	return;
++}
++#endif /* NOT_NEEDED */
++
++
++STATIC int
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++mini_fo_statfs(struct dentry *d, struct kstatfs *buf)
++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++mini_fo_statfs(super_block_t *sb, struct kstatfs *buf)
++#else
++mini_fo_statfs(super_block_t *sb, struct statfs *buf)
++#endif
++{
++	int err = 0;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++	struct dentry *hidden_d;
++
++	hidden_d = dtohd(d);
++	err = vfs_statfs(hidden_d, buf);
++#else
++	super_block_t *hidden_sb;
++
++	hidden_sb = stohs(sb);
++	err = vfs_statfs(hidden_sb, buf);
++#endif
++
++	return err;
++}
++
++
++/*
++ * XXX: not implemented.  This is not allowed yet.
++ * Should we call this on the hidden_sb?  Probably not.
++ */
++STATIC int
++mini_fo_remount_fs(super_block_t *sb, int *flags, char *data)
++{
++	//printk(KERN_CRIT "mini_fo_remount_fs: WARNING, this function is umimplemented.\n");
++	return -ENOSYS;
++}
++
++
++/*
++ * Called by iput() when the inode reference count reached zero
++ * and the inode is not hashed anywhere.  Used to clear anything
++ * that needs to be, before the inode is completely destroyed and put
++ * on the inode free list.
++ */
++STATIC void
++mini_fo_clear_inode(inode_t *inode)
++{
++	/*
++	 * Decrement a reference to a hidden_inode, which was incremented
++	 * by our read_inode when it was created initially.
++	 */
++
++	/* release the wol_list */
++	if(S_ISDIR(inode->i_mode)) {
++		__meta_put_lists(inode);
++	}
++
++	/* mk: fan out fun */
++	if(itohi(inode))
++		iput(itohi(inode));
++	if(itohi2(inode))
++		iput(itohi2(inode));
++
++	// XXX: why this assertion fails?
++	// because it doesn't like us
++	// ASSERT((inode->i_state & I_DIRTY) == 0);
++	kfree(itopd(inode));
++	__itopd(inode) = NULL;
++}
++
++
++/*
++ * Called in do_umount() if the MNT_FORCE flag was used and this
++ * function is defined.  See comment in linux/fs/super.c:do_umount().
++ * Used only in nfs, to kill any pending RPC tasks, so that subsequent
++ * code can actually succeed and won't leave tasks that need handling.
++ *
++ * PS. I wonder if this is somehow useful to undo damage that was
++ * left in the kernel after a user level file server (such as amd)
++ * dies.
++ */
++STATIC void
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++mini_fo_umount_begin(struct vfsmount *mnt, int flags)
++{
++	struct vfsmount *hidden_mnt;
++
++	hidden_mnt = stopd(mnt->mnt_sb)->hidden_mnt;
++
++	if (hidden_mnt->mnt_sb->s_op->umount_begin)
++		hidden_mnt->mnt_sb->s_op->umount_begin(hidden_mnt, flags);
++
++}
++#else
++mini_fo_umount_begin(super_block_t *sb)
++{
++	super_block_t *hidden_sb;
++
++	hidden_sb = stohs(sb);
++
++	if (hidden_sb->s_op->umount_begin)
++		hidden_sb->s_op->umount_begin(hidden_sb);
++
++}
++#endif
++
++
++struct super_operations mini_fo_sops =
++{
++	read_inode:		mini_fo_read_inode,
++#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
++	write_inode:	mini_fo_write_inode,
++#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++	put_inode:		mini_fo_put_inode,
++#if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
++	delete_inode:	mini_fo_delete_inode,
++#endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++	put_super:		mini_fo_put_super,
++	statfs:		mini_fo_statfs,
++	remount_fs:		mini_fo_remount_fs,
++	clear_inode:	mini_fo_clear_inode,
++	umount_begin:	mini_fo_umount_begin,
++};
+--- /dev/null
++++ b/fs/mini_fo/Kconfig
+@@ -0,0 +1,3 @@
++config MINI_FO
++	tristate "Mini fanout overlay filesystem"
++
diff --git a/target/linux/generic/patches-2.6.35/210-mini_fo_2.6.25_fixes.patch b/target/linux/generic/patches-2.6.35/210-mini_fo_2.6.25_fixes.patch
new file mode 100644
index 0000000000..b64630d500
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/210-mini_fo_2.6.25_fixes.patch
@@ -0,0 +1,143 @@
+--- a/fs/mini_fo/main.c
++++ b/fs/mini_fo/main.c
+@@ -79,6 +79,7 @@ mini_fo_tri_interpose(dentry_t *hidden_d
+ 	 * of the new inode's fields
+ 	 */
+ 
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,25)
+ 	/*
+ 	 * original: inode = iget(sb, hidden_inode->i_ino);
+ 	 */
+@@ -87,6 +88,13 @@ mini_fo_tri_interpose(dentry_t *hidden_d
+ 		err = -EACCES;		/* should be impossible??? */
+ 		goto out;
+ 	}
++#else
++	inode = mini_fo_iget(sb, iunique(sb, 25));
++	if (IS_ERR(inode)) {
++		err = PTR_ERR(inode);
++		goto out;
++	}
++#endif
+ 
+ 	/*
+ 	 * interpose the inode if not already interposed
+@@ -184,9 +192,9 @@ mini_fo_parse_options(super_block_t *sb,
+ 				hidden_root = ERR_PTR(err);
+ 				goto out;
+ 			}
+-			hidden_root = nd.dentry;
+-			stopd(sb)->base_dir_dentry = nd.dentry;
+-			stopd(sb)->hidden_mnt = nd.mnt;
++			hidden_root = nd_get_dentry(&nd);
++			stopd(sb)->base_dir_dentry = nd_get_dentry(&nd);
++			stopd(sb)->hidden_mnt = nd_get_mnt(&nd);
+ 
+ 		} else if(!strncmp("sto=", options, 4)) {
+ 			/* parse the storage dir */
+@@ -204,9 +212,9 @@ mini_fo_parse_options(super_block_t *sb,
+ 				hidden_root2 = ERR_PTR(err);
+ 				goto out;
+ 			}
+-			hidden_root2 = nd2.dentry;
+-			stopd(sb)->storage_dir_dentry = nd2.dentry;
+-			stopd(sb)->hidden_mnt2 = nd2.mnt;
++			hidden_root2 = nd_get_dentry(&nd2);
++			stopd(sb)->storage_dir_dentry = nd_get_dentry(&nd2);
++			stopd(sb)->hidden_mnt2 = nd_get_mnt(&nd2);
+ 			stohs2(sb) = hidden_root2->d_sb;
+ 
+ 			/* validate storage dir, this is done in
+--- a/fs/mini_fo/mini_fo.h
++++ b/fs/mini_fo/mini_fo.h
+@@ -302,6 +302,10 @@ extern int mini_fo_tri_interpose(dentry_
+ extern int mini_fo_cp_cont(dentry_t *tgt_dentry, struct vfsmount *tgt_mnt,
+ 			   dentry_t *src_dentry, struct vfsmount *src_mnt);
+ 
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25)
++extern struct inode *mini_fo_iget(struct super_block *sb, unsigned long ino);
++#endif
++
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+ extern int mini_fo_create(inode_t *dir, dentry_t *dentry, int mode, struct nameidata *nd);
+ 
+@@ -501,6 +505,29 @@ static inline void double_unlock(struct
+ #endif  /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) */
+ #endif /* __KERNEL__ */
+ 
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25)
++static inline dentry_t *nd_get_dentry(struct nameidata *nd)
++{
++	return (nd->path.dentry);
++}
++
++static inline struct vfsmount *nd_get_mnt(struct nameidata *nd)
++{
++	return (nd->path.mnt);
++}
++#else
++static inline dentry_t *nd_get_dentry(struct nameidata *nd)
++{
++	return (nd->dentry);
++}
++
++static inline struct vfsmount *nd_get_mnt(struct nameidata *nd)
++{
++	return (nd->mnt);
++}
++#endif
++
+ /*
+  * Definitions for user and kernel code
+  */
+--- a/fs/mini_fo/super.c
++++ b/fs/mini_fo/super.c
+@@ -262,10 +262,31 @@ mini_fo_umount_begin(super_block_t *sb)
+ }
+ #endif
+ 
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25)
++struct inode *
++mini_fo_iget(struct super_block *sb, unsigned long ino)
++{
++	struct inode *inode;
++
++	inode = iget_locked(sb, ino);
++	if (!inode)
++		return ERR_PTR(-ENOMEM);
++
++	if (!(inode->i_state & I_NEW))
++		return inode;
++
++	mini_fo_read_inode(inode);
++
++	unlock_new_inode(inode);
++	return inode;
++}
++#endif /* if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,25) */
+ 
+ struct super_operations mini_fo_sops =
+ {
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,25)
+ 	read_inode:		mini_fo_read_inode,
++#endif
+ #if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
+ 	write_inode:	mini_fo_write_inode,
+ #endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
+--- a/fs/mini_fo/aux.c
++++ b/fs/mini_fo/aux.c
+@@ -164,11 +164,11 @@ dentry_t *bpath_walk(super_block_t *sb,
+ 	err = vfs_path_lookup(mnt->mnt_root, mnt, bpath+1, 0, &nd);
+ 
+ 	/* validate */
+-	if (err || !nd.dentry || !nd.dentry->d_inode) {
++	if (err || !nd_get_dentry(&nd) || !nd_get_dentry(&nd)->d_inode) {
+ 		printk(KERN_CRIT "mini_fo: bpath_walk: path_walk failed.\n");
+ 		return NULL;
+ 	}
+-	return nd.dentry;
++	return nd_get_dentry(&nd);
+ }
+ 
+ 
diff --git a/target/linux/generic/patches-2.6.35/211-mini_fo_2.6.25_dentry_open_war.patch b/target/linux/generic/patches-2.6.35/211-mini_fo_2.6.25_dentry_open_war.patch
new file mode 100644
index 0000000000..48a19429b9
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/211-mini_fo_2.6.25_dentry_open_war.patch
@@ -0,0 +1,66 @@
+--- a/fs/mini_fo/meta.c
++++ b/fs/mini_fo/meta.c
+@@ -442,6 +442,11 @@ int meta_write_d_entry(dentry_t *dentry,
+ 			   S_IRUSR | S_IWUSR);
+ #endif
+ 	}
++
++	/* $%& err, is this correct? */
++	meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++	mntget(meta_mnt);
++
+         /* open META-file for writing */
+         meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
+         if(!meta_file || IS_ERR(meta_file)) {
+@@ -535,6 +540,11 @@ int meta_write_r_entry(dentry_t *dentry,
+ 			   meta_dentry, S_IRUSR | S_IWUSR);
+ #endif
+ 	}
++
++	/* $%& err, is this correct? */
++	meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++	mntget(meta_mnt);
++
+         /* open META-file for writing */
+         meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
+         if(!meta_file || IS_ERR(meta_file)) {
+@@ -671,14 +681,16 @@ int meta_sync_d_list(dentry_t *dentry, i
+ 		}
+ 	}
+ 
++	/* $%& err, is this correct? */
++	meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++	mntget(meta_mnt);
++
+         /* open META-file for writing */
+         meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
+                                   ERROR opening meta file.\n");
+-		/* we don't mntget so we dont't mntput (for now)
+-		 * mntput(meta_mnt);
+-		 */
++		mntput(meta_mnt);
+ 		dput(meta_dentry);
+ 		err = -1;
+                 goto out;
+@@ -811,14 +823,16 @@ int meta_sync_r_list(dentry_t *dentry, i
+ 		}
+ 	}
+ 
++	/* $%& err, is this correct? */
++	meta_mnt = stopd(dentry->d_inode->i_sb)->hidden_mnt2;
++	mntget(meta_mnt);
++
+         /* open META-file for writing */
+         meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
+                                   ERROR opening meta file.\n");
+-		/* we don't mntget so we dont't mntput (for now)
+-		 * mntput(meta_mnt);
+-		 */
++		mntput(meta_mnt);
+ 		dput(meta_dentry);
+ 		err = -1;
+                 goto out;
diff --git a/target/linux/generic/patches-2.6.35/212-mini_fo_2.6.26_fixes.patch b/target/linux/generic/patches-2.6.35/212-mini_fo_2.6.26_fixes.patch
new file mode 100644
index 0000000000..b5fa64e6a1
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/212-mini_fo_2.6.26_fixes.patch
@@ -0,0 +1,37 @@
+--- a/fs/mini_fo/super.c
++++ b/fs/mini_fo/super.c
+@@ -84,6 +84,7 @@ mini_fo_write_inode(inode_t *inode, int
+ #endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
+ 
+ 
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)
+ STATIC void
+ mini_fo_put_inode(inode_t *inode)
+ {
+@@ -99,6 +100,7 @@ mini_fo_put_inode(inode_t *inode)
+ 	if (atomic_read(&inode->i_count) == 1)
+ 		inode->i_nlink = 0;
+ }
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26) */
+ 
+ 
+ #if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
+@@ -238,7 +240,7 @@ mini_fo_clear_inode(inode_t *inode)
+  * dies.
+  */
+ STATIC void
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,18)) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26))
+ mini_fo_umount_begin(struct vfsmount *mnt, int flags)
+ {
+ 	struct vfsmount *hidden_mnt;
+@@ -290,7 +292,9 @@ struct super_operations mini_fo_sops =
+ #if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
+ 	write_inode:	mini_fo_write_inode,
+ #endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)
+ 	put_inode:		mini_fo_put_inode,
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26) */
+ #if defined(FIST_DEBUG) || defined(FIST_FILTER_SCA)
+ 	delete_inode:	mini_fo_delete_inode,
+ #endif /* defined(FIST_DEBUG) || defined(FIST_FILTER_SCA) */
diff --git a/target/linux/generic/patches-2.6.35/213-mini_fo_2.6.27_fixes.patch b/target/linux/generic/patches-2.6.35/213-mini_fo_2.6.27_fixes.patch
new file mode 100644
index 0000000000..f92c18b254
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/213-mini_fo_2.6.27_fixes.patch
@@ -0,0 +1,41 @@
+--- a/fs/mini_fo/inode.c
++++ b/fs/mini_fo/inode.c
+@@ -439,7 +439,7 @@ mini_fo_symlink(inode_t *dir, dentry_t *
+ 	int err=0;
+ 	dentry_t *hidden_sto_dentry;
+ 	dentry_t *hidden_sto_dir_dentry;
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27))
+         umode_t mode;
+ #endif
+ 
+@@ -466,7 +466,7 @@ mini_fo_symlink(inode_t *dir, dentry_t *
+ 	down(&hidden_sto_dir_dentry->d_inode->i_sem);
+ #endif
+ 
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27))
+ 	mode = S_IALLUGO;
+ 	err = vfs_symlink(hidden_sto_dir_dentry->d_inode,
+ 			  hidden_sto_dentry, symname, mode);
+@@ -1128,7 +1128,7 @@ void mini_fo_put_link(struct dentry *den
+ #endif
+ 
+ STATIC int
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27))
+ mini_fo_permission(inode_t *inode, int mask, struct nameidata *nd)
+ #else
+ mini_fo_permission(inode_t *inode, int mask)
+@@ -1150,8 +1150,9 @@ mini_fo_permission(inode_t *inode, int m
+ 	 *	if (err)
+ 	 *		goto out;
+ 	 */
+-
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
++	err = inode_permission(hidden_inode, mask);
++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+ 	err = permission(hidden_inode, mask, nd);
+ #else
+ 	err = permission(hidden_inode, mask);
diff --git a/target/linux/generic/patches-2.6.35/214-mini_fo_2.6.29.patch b/target/linux/generic/patches-2.6.35/214-mini_fo_2.6.29.patch
new file mode 100644
index 0000000000..63d704bf51
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/214-mini_fo_2.6.29.patch
@@ -0,0 +1,96 @@
+--- a/fs/mini_fo/aux.c
++++ b/fs/mini_fo/aux.c
+@@ -236,7 +236,7 @@ int mini_fo_cp_cont(dentry_t *tgt_dentry
+ 	mntget(src_mnt);
+ 
+ 	/* open file write only */
+-	tgt_file = dentry_open(tgt_dentry, tgt_mnt, 0x1);
++	tgt_file = dentry_open(tgt_dentry, tgt_mnt, 0x1, current_cred());
+ 	if(!tgt_file || IS_ERR(tgt_file)) {
+ 		printk(KERN_CRIT "mini_fo_cp_cont: ERROR opening target file.\n");
+ 		err = PTR_ERR(tgt_file);
+@@ -244,7 +244,7 @@ int mini_fo_cp_cont(dentry_t *tgt_dentry
+ 	}
+ 
+ 	/* open file read only */
+-	src_file = dentry_open(src_dentry, src_mnt, 0x0);
++	src_file = dentry_open(src_dentry, src_mnt, 0x0, current_cred());
+ 	if(!src_file || IS_ERR(src_file)) {
+ 		printk(KERN_CRIT "mini_fo_cp_cont: ERROR opening source file.\n");
+ 		err = PTR_ERR(src_file);
+--- a/fs/mini_fo/file.c
++++ b/fs/mini_fo/file.c
+@@ -437,7 +437,7 @@ mini_fo_open(inode_t *inode, file_t *fil
+ 			mntget(stopd(inode->i_sb)->hidden_mnt);
+ 			hidden_file = dentry_open(hidden_dentry,
+ 						  stopd(inode->i_sb)->hidden_mnt,
+-						  hidden_flags);
++						  hidden_flags, file->f_cred);
+ 			if (IS_ERR(hidden_file)) {
+ 				err = PTR_ERR(hidden_file);
+ 				dput(hidden_dentry);
+@@ -479,7 +479,7 @@ mini_fo_open(inode_t *inode, file_t *fil
+ 			mntget(stopd(inode->i_sb)->hidden_mnt);
+ 			hidden_file = dentry_open(hidden_dentry,
+ 						  stopd(inode->i_sb)->hidden_mnt,
+-						  hidden_flags);
++						  hidden_flags, file->f_cred);
+ 			if (IS_ERR(hidden_file)) {
+ 				err = PTR_ERR(hidden_file);
+ 				dput(hidden_dentry);
+@@ -512,7 +512,7 @@ mini_fo_open(inode_t *inode, file_t *fil
+ 	mntget(stopd(inode->i_sb)->hidden_mnt2);
+ 	hidden_sto_file = dentry_open(hidden_sto_dentry,
+ 				      stopd(inode->i_sb)->hidden_mnt2,
+-				      hidden_flags);
++				      hidden_flags, file->f_cred);
+ 
+ 	/* dentry_open dputs the dentry if it fails */
+ 	if (IS_ERR(hidden_sto_file)) {
+--- a/fs/mini_fo/meta.c
++++ b/fs/mini_fo/meta.c
+@@ -56,7 +56,7 @@ int meta_build_lists(dentry_t *dentry)
+ 
+ 
+ 		/* open META-file for reading */
+-		meta_file = dentry_open(meta_dentry, meta_mnt, 0x0);
++		meta_file = dentry_open(meta_dentry, meta_mnt, 0x0, current_cred());
+ 		if(!meta_file || IS_ERR(meta_file)) {
+ 			printk(KERN_CRIT "mini_fo: meta_build_lists: \
+                                           ERROR opening META file.\n");
+@@ -448,7 +448,7 @@ int meta_write_d_entry(dentry_t *dentry,
+ 	mntget(meta_mnt);
+ 
+         /* open META-file for writing */
+-        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1, current_cred());
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_write_d_entry: \
+                                   ERROR opening meta file.\n");
+@@ -546,7 +546,7 @@ int meta_write_r_entry(dentry_t *dentry,
+ 	mntget(meta_mnt);
+ 
+         /* open META-file for writing */
+-        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1, current_cred());
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_write_r_entry: \
+                                   ERROR opening meta file.\n");
+@@ -686,7 +686,7 @@ int meta_sync_d_list(dentry_t *dentry, i
+ 	mntget(meta_mnt);
+ 
+         /* open META-file for writing */
+-        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1, current_cred());
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_sync_d_list: \
+                                   ERROR opening meta file.\n");
+@@ -828,7 +828,7 @@ int meta_sync_r_list(dentry_t *dentry, i
+ 	mntget(meta_mnt);
+ 
+         /* open META-file for writing */
+-        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1);
++        meta_file = dentry_open(meta_dentry, meta_mnt, 0x1, current_cred());
+         if(!meta_file || IS_ERR(meta_file)) {
+                 printk(KERN_CRIT "mini_fo: meta_sync_r_list: \
+                                   ERROR opening meta file.\n");
diff --git a/target/linux/generic/patches-2.6.35/215-mini_fo_2.6.30.patch b/target/linux/generic/patches-2.6.35/215-mini_fo_2.6.30.patch
new file mode 100644
index 0000000000..2d20920614
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/215-mini_fo_2.6.30.patch
@@ -0,0 +1,157 @@
+--- a/fs/mini_fo/aux.c
++++ b/fs/mini_fo/aux.c
+@@ -86,8 +86,10 @@ int get_neg_sto_dentry(dentry_t *dentry)
+ 	len = dentry->d_name.len;
+ 	name = dentry->d_name.name;
+ 
++	mutex_lock(&dtohd2(dentry->d_parent)->d_inode->i_mutex);
+ 	dtohd2(dentry) =
+ 		lookup_one_len(name, dtohd2(dentry->d_parent), len);
++	mutex_unlock(&dtohd2(dentry->d_parent)->d_inode->i_mutex);
+ 
+  out:
+ 	return err;
+@@ -426,7 +428,9 @@ int build_sto_structure(dentry_t *dir, d
+ 		const unsigned char *name;
+ 		len = dtohd(dentry)->d_name.len;
+ 		name = dtohd(dentry)->d_name.name;
++		mutex_lock(&dtohd2(dir)->d_inode->i_mutex);
+ 		hidden_sto_dentry = lookup_one_len(name, dtohd2(dir), len);
++		mutex_unlock(&dtohd2(dir)->d_inode->i_mutex);
+ 		dtohd2(dentry) = hidden_sto_dentry;
+ 	}
+ 
+--- a/fs/mini_fo/inode.c
++++ b/fs/mini_fo/inode.c
+@@ -113,17 +113,23 @@ mini_fo_lookup(inode_t *dir, dentry_t *d
+ 		hidden_dir_dentry = hidden_dentry->d_parent;
+ 		kfree(bpath);
+ 	}
+-	else if(hidden_dir_dentry && hidden_dir_dentry->d_inode)
++	else if(hidden_dir_dentry && hidden_dir_dentry->d_inode) {
++		mutex_lock(&hidden_dir_dentry->d_inode->i_mutex);
+ 		hidden_dentry =
+ 			lookup_one_len(name, hidden_dir_dentry, namelen);
+-	else
++		mutex_unlock(&hidden_dir_dentry->d_inode->i_mutex);
++	} else {
+ 		hidden_dentry = NULL;
++	}
+ 
+-	if(hidden_sto_dir_dentry && hidden_sto_dir_dentry->d_inode)
++	if(hidden_sto_dir_dentry && hidden_sto_dir_dentry->d_inode) {
++		mutex_lock(&hidden_sto_dir_dentry->d_inode->i_mutex);
+ 		hidden_sto_dentry =
+ 			lookup_one_len(name, hidden_sto_dir_dentry, namelen);
+-	else
++		mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
++	} else {
+ 		hidden_sto_dentry =  NULL;
++	}
+ 
+ 	/* catch error in lookup */
+ 	if (IS_ERR(hidden_dentry) || IS_ERR(hidden_sto_dentry)) {
+@@ -553,9 +559,11 @@ mini_fo_rmdir(inode_t *dir, dentry_t *de
+ #endif
+ 
+ 		/* Delete an old WOL file contained in the storage dir */
++		mutex_lock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		meta_dentry = lookup_one_len(META_FILENAME,
+ 					     hidden_sto_dentry,
+ 					     strlen(META_FILENAME));
++		mutex_unlock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		if(meta_dentry->d_inode) {
+ 			err = vfs_unlink(hidden_sto_dentry->d_inode, meta_dentry);
+ 			dput(meta_dentry);
+@@ -643,9 +651,11 @@ mini_fo_rmdir(inode_t *dir, dentry_t *de
+ #endif
+ 
+ 		/* Delete an old WOL file contained in the storage dir */
++		mutex_lock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		meta_dentry = lookup_one_len(META_FILENAME,
+ 					     hidden_sto_dentry,
+ 					     strlen(META_FILENAME));
++		mutex_unlock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		if(meta_dentry->d_inode) {
+ 			/* is this necessary? dget(meta_dentry); */
+ 			err = vfs_unlink(hidden_sto_dentry->d_inode,
+@@ -688,9 +698,11 @@ mini_fo_rmdir(inode_t *dir, dentry_t *de
+ #endif
+ 
+ 		/* Delete an old WOL file contained in the storage dir */
++		mutex_lock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		meta_dentry = lookup_one_len(META_FILENAME,
+ 					     hidden_sto_dentry,
+ 					     strlen(META_FILENAME));
++		mutex_unlock(&hidden_sto_dentry->d_inode->i_mutex);
+ 		if(meta_dentry->d_inode) {
+ 			/* is this necessary? dget(meta_dentry); */
+ 			err = vfs_unlink(hidden_sto_dentry->d_inode,
+--- a/fs/mini_fo/meta.c
++++ b/fs/mini_fo/meta.c
+@@ -43,9 +43,11 @@ int meta_build_lists(dentry_t *dentry)
+ 
+   	/* might there be a META-file? */
+ 	if(dtohd2(dentry) && dtohd2(dentry)->d_inode) {
++		mutex_lock(&dtohd2(dentry)->d_inode->i_mutex);
+ 		meta_dentry = lookup_one_len(META_FILENAME,
+ 					     dtohd2(dentry),
+ 					     strlen(META_FILENAME));
++		mutex_unlock(&dtohd2(dentry)->d_inode->i_mutex);
+ 		if(!meta_dentry->d_inode) {
+ 			dput(meta_dentry);
+ 			goto out_ok;
+@@ -426,8 +428,11 @@ int meta_write_d_entry(dentry_t *dentry,
+ 			goto out;
+                 }
+         }
++
++	mutex_lock(&dtohd2(dentry)->d_inode->i_mutex);
+ 	meta_dentry = lookup_one_len(META_FILENAME,
+ 				     dtohd2(dentry), strlen (META_FILENAME));
++	mutex_unlock(&dtohd2(dentry)->d_inode->i_mutex);
+ 
+ 	/* We need to create a META-file */
+         if(!meta_dentry->d_inode) {
+@@ -527,9 +532,13 @@ int meta_write_r_entry(dentry_t *dentry,
+ 			goto out;
+                 }
+         }
++
++	mutex_lock(&dtohd2(dentry)->d_inode->i_mutex);
+ 	meta_dentry = lookup_one_len(META_FILENAME,
+ 				     dtohd2(dentry),
+ 				     strlen (META_FILENAME));
++	mutex_unlock(&dtohd2(dentry)->d_inode->i_mutex);
++
+         if(!meta_dentry->d_inode) {
+                 /* We need to create a META-file */
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+@@ -641,9 +650,13 @@ int meta_sync_d_list(dentry_t *dentry, i
+ 			goto out;
+                 }
+         }
++
++	mutex_lock(&dtohd2(dentry)->d_inode->i_mutex);
+ 	meta_dentry = lookup_one_len(META_FILENAME,
+ 				     dtohd2(dentry),
+ 				     strlen(META_FILENAME));
++	mutex_unlock(&dtohd2(dentry)->d_inode->i_mutex);
++
+         if(!meta_dentry->d_inode) {
+                 /* We need to create a META-file */
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+@@ -784,9 +797,13 @@ int meta_sync_r_list(dentry_t *dentry, i
+ 			goto out;
+                 }
+         }
++
++	mutex_lock(&dtohd2(dentry)->d_inode->i_mutex);
+ 	meta_dentry = lookup_one_len(META_FILENAME,
+ 				     dtohd2(dentry),
+ 				     strlen(META_FILENAME));
++	mutex_unlock(&dtohd2(dentry)->d_inode->i_mutex);
++
+         if(!meta_dentry->d_inode) {
+                 /* We need to create a META-file */
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
diff --git a/target/linux/generic/patches-2.6.35/216-mini_fo_locking.patch b/target/linux/generic/patches-2.6.35/216-mini_fo_locking.patch
new file mode 100644
index 0000000000..4f075920fb
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/216-mini_fo_locking.patch
@@ -0,0 +1,25 @@
+--- a/fs/mini_fo/state.c
++++ b/fs/mini_fo/state.c
+@@ -537,17 +537,17 @@ int nondir_mod_to_del(dentry_t *dentry)
+ 	dtohd(dentry) = NULL;
+ 	dtost(dentry) = DELETED;
+ 
+-	/* add deleted file to META-file */
+-	meta_add_d_entry(dentry->d_parent,
+-			 dentry->d_name.name,
+-			 dentry->d_name.len);
+-
+ 	/* was: unlock_dir(hidden_sto_dir_dentry); */
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
+ 	mutex_unlock(&hidden_sto_dir_dentry->d_inode->i_mutex);
+ #else
+ 	up(&hidden_sto_dir_dentry->d_inode->i_sem);
+ #endif
++	/* add deleted file to META-file */
++	meta_add_d_entry(dentry->d_parent,
++			 dentry->d_name.name,
++			 dentry->d_name.len);
++
+ 	dput(hidden_sto_dir_dentry);
+ 
+  out:
diff --git a/target/linux/generic/patches-2.6.35/217-mini_fo_2.6.35.patch b/target/linux/generic/patches-2.6.35/217-mini_fo_2.6.35.patch
new file mode 100644
index 0000000000..ef697291b0
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/217-mini_fo_2.6.35.patch
@@ -0,0 +1,20 @@
+--- a/fs/mini_fo/file.c
++++ b/fs/mini_fo/file.c
+@@ -616,7 +616,7 @@ mini_fo_fsync(file_t *file, dentry_t *de
+ #else
+ 			down(&hidden_dentry->d_inode->i_sem);
+ #endif
+-			err1 = hidden_file->f_op->fsync(hidden_file, hidden_dentry, datasync);
++			err1 = hidden_file->f_op->fsync(hidden_file, hidden_dentry);
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
+ 			mutex_unlock(&hidden_dentry->d_inode->i_mutex);
+ #else
+@@ -633,7 +633,7 @@ mini_fo_fsync(file_t *file, dentry_t *de
+ #else
+ 			down(&hidden_dentry->d_inode->i_sem);
+ #endif
+-			err2 = hidden_file->f_op->fsync(hidden_file, hidden_dentry, datasync);
++			err2 = hidden_file->f_op->fsync(hidden_file, hidden_dentry);
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,16)
+ 			mutex_unlock(&hidden_dentry->d_inode->i_mutex);
+ #else
diff --git a/target/linux/generic/patches-2.6.35/219-kobject_uevent.patch b/target/linux/generic/patches-2.6.35/219-kobject_uevent.patch
new file mode 100644
index 0000000000..f15749fa17
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/219-kobject_uevent.patch
@@ -0,0 +1,32 @@
+--- a/lib/kobject_uevent.c
++++ b/lib/kobject_uevent.c
+@@ -49,6 +49,18 @@ static const char *kobject_actions[] = {
+ 	[KOBJ_OFFLINE] =	"offline",
+ };
+ 
++u64 uevent_next_seqnum(void)
++{
++	u64 seq;
++
++	spin_lock(&sequence_lock);
++	seq = ++uevent_seqnum;
++	spin_unlock(&sequence_lock);
++
++	return seq;
++}
++EXPORT_SYMBOL_GPL(uevent_next_seqnum);
++
+ /**
+  * kobject_action_type - translate action string to numeric type
+  *
+@@ -244,9 +256,7 @@ int kobject_uevent_env(struct kobject *k
+ 		kobj->state_remove_uevent_sent = 1;
+ 
+ 	/* we will send an event, so request a new sequence number */
+-	spin_lock(&sequence_lock);
+-	seq = ++uevent_seqnum;
+-	spin_unlock(&sequence_lock);
++	seq = uevent_next_seqnum();
+ 	retval = add_uevent_var(env, "SEQNUM=%llu", (unsigned long long)seq);
+ 	if (retval)
+ 		goto exit;
diff --git a/target/linux/generic/patches-2.6.35/220-sound_kconfig.patch b/target/linux/generic/patches-2.6.35/220-sound_kconfig.patch
new file mode 100644
index 0000000000..fb3df254dc
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/220-sound_kconfig.patch
@@ -0,0 +1,11 @@
+--- a/sound/core/Kconfig
++++ b/sound/core/Kconfig
+@@ -8,7 +8,7 @@ config SND_PCM
+ 	select GCD
+ 
+ config SND_HWDEP
+-	tristate
++	tristate "Sound hardware support"
+ 
+ config SND_RAWMIDI
+ 	tristate
diff --git a/target/linux/generic/patches-2.6.35/221-binfmt_elf_gcc4.1.patch b/target/linux/generic/patches-2.6.35/221-binfmt_elf_gcc4.1.patch
new file mode 100644
index 0000000000..f452a25774
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/221-binfmt_elf_gcc4.1.patch
@@ -0,0 +1,11 @@
+--- a/fs/binfmt_elf.c
++++ b/fs/binfmt_elf.c
+@@ -1136,7 +1136,7 @@ static unsigned long vma_dump_size(struc
+ 	if (FILTER(ELF_HEADERS) &&
+ 	    vma->vm_pgoff == 0 && (vma->vm_flags & VM_READ)) {
+ 		u32 __user *header = (u32 __user *) vma->vm_start;
+-		u32 word;
++		u32 word = 0;
+ 		mm_segment_t fs = get_fs();
+ 		/*
+ 		 * Doing it this way gets the constant folded by GCC.
diff --git a/target/linux/generic/patches-2.6.35/222-partial_eraseblock_write.patch b/target/linux/generic/patches-2.6.35/222-partial_eraseblock_write.patch
new file mode 100644
index 0000000000..0c7672e8be
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/222-partial_eraseblock_write.patch
@@ -0,0 +1,146 @@
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -21,6 +21,8 @@
+ #include <linux/root_dev.h>
+ #include <linux/magic.h>
+ 
++#define MTD_ERASE_PARTIAL	0x8000 /* partition only covers parts of an erase block */
++
+ /* Our partition linked list */
+ static LIST_HEAD(mtd_partitions);
+ 
+@@ -226,13 +228,60 @@ static int part_erase(struct mtd_info *m
+ 		return -EROFS;
+ 	if (instr->addr >= mtd->size)
+ 		return -EINVAL;
++
++	instr->partial_start = false;
++	if (mtd->flags & MTD_ERASE_PARTIAL) {
++		size_t readlen = 0;
++		u64 mtd_ofs;
++
++		instr->erase_buf = kmalloc(part->master->erasesize, GFP_ATOMIC);
++		if (!instr->erase_buf)
++			return -ENOMEM;
++
++		mtd_ofs = part->offset + instr->addr;
++		instr->erase_buf_ofs = do_div(mtd_ofs, part->master->erasesize);
++
++		if (instr->erase_buf_ofs > 0) {
++			instr->addr -= instr->erase_buf_ofs;
++			ret = part->master->read(part->master,
++				instr->addr + part->offset,
++				part->master->erasesize,
++				&readlen, instr->erase_buf);
++
++			instr->partial_start = true;
++		} else {
++			mtd_ofs = part->offset + part->mtd.size;
++			instr->erase_buf_ofs = part->master->erasesize -
++				do_div(mtd_ofs, part->master->erasesize);
++
++			if (instr->erase_buf_ofs > 0) {
++				instr->len += instr->erase_buf_ofs;
++				ret = part->master->read(part->master,
++					part->offset + instr->addr +
++					instr->len - part->master->erasesize,
++					part->master->erasesize, &readlen,
++					instr->erase_buf);
++			} else {
++				ret = 0;
++			}
++		}
++		if (ret < 0) {
++			kfree(instr->erase_buf);
++			return ret;
++		}
++
++	}
++
+ 	instr->addr += part->offset;
+ 	ret = part->master->erase(part->master, instr);
+ 	if (ret) {
+ 		if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
+ 			instr->fail_addr -= part->offset;
+ 		instr->addr -= part->offset;
++		if (mtd->flags & MTD_ERASE_PARTIAL)
++			kfree(instr->erase_buf);
+ 	}
++
+ 	return ret;
+ }
+ 
+@@ -240,7 +289,25 @@ void mtd_erase_callback(struct erase_inf
+ {
+ 	if (instr->mtd->erase == part_erase) {
+ 		struct mtd_part *part = PART(instr->mtd);
++		size_t wrlen = 0;
+ 
++		if (instr->mtd->flags & MTD_ERASE_PARTIAL) {
++			if (instr->partial_start) {
++				part->master->write(part->master,
++					instr->addr, instr->erase_buf_ofs,
++					&wrlen, instr->erase_buf);
++				instr->addr += instr->erase_buf_ofs;
++			} else {
++				instr->len -= instr->erase_buf_ofs;
++				part->master->write(part->master,
++					instr->addr + instr->len,
++					instr->erase_buf_ofs, &wrlen,
++					instr->erase_buf +
++					part->master->erasesize -
++					instr->erase_buf_ofs);
++			}
++			kfree(instr->erase_buf);
++		}
+ 		if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
+ 			instr->fail_addr -= part->offset;
+ 		instr->addr -= part->offset;
+@@ -473,18 +540,24 @@ static struct mtd_part *add_one_partitio
+ 	if ((slave->mtd.flags & MTD_WRITEABLE) &&
+ 	    mtd_mod_by_eb(slave->offset, &slave->mtd)) {
+ 		/* Doesn't start on a boundary of major erase size */
+-		/* FIXME: Let it be writable if it is on a boundary of
+-		 * _minor_ erase size though */
+-		slave->mtd.flags &= ~MTD_WRITEABLE;
+-		printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
+-			part->name);
++		slave->mtd.flags |= MTD_ERASE_PARTIAL;
++		if (((u32) slave->mtd.size) > master->erasesize)
++			slave->mtd.flags &= ~MTD_WRITEABLE;
++		else
++			slave->mtd.erasesize = slave->mtd.size;
+ 	}
+ 	if ((slave->mtd.flags & MTD_WRITEABLE) &&
+-	    mtd_mod_by_eb(slave->mtd.size, &slave->mtd)) {
+-		slave->mtd.flags &= ~MTD_WRITEABLE;
+-		printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
+-			part->name);
+-	}
++	    mtd_mod_by_eb(slave->offset + slave->mtd.size, &slave->mtd)) {
++		slave->mtd.flags |= MTD_ERASE_PARTIAL;
++
++		if ((u32) slave->mtd.size > master->erasesize)
++			slave->mtd.flags &= ~MTD_WRITEABLE;
++		else
++			slave->mtd.erasesize = slave->mtd.size;
++	}
++	if ((slave->mtd.flags & (MTD_ERASE_PARTIAL|MTD_WRITEABLE)) == MTD_ERASE_PARTIAL)
++		printk(KERN_WARNING"mtd: partition \"%s\" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only\n",
++				part->name);
+ 
+ 	slave->mtd.ecclayout = master->ecclayout;
+ 	if (master->block_isbad) {
+--- a/include/linux/mtd/mtd.h
++++ b/include/linux/mtd/mtd.h
+@@ -46,6 +46,10 @@ struct erase_info {
+ 	u_long priv;
+ 	u_char state;
+ 	struct erase_info *next;
++
++	u8 *erase_buf;
++	u32 erase_buf_ofs;
++	bool partial_start;
+ };
+ 
+ struct mtd_erase_region_info {
diff --git a/target/linux/generic/patches-2.6.35/240-packet_socket_type.patch b/target/linux/generic/patches-2.6.35/240-packet_socket_type.patch
new file mode 100644
index 0000000000..afaf9204fe
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/240-packet_socket_type.patch
@@ -0,0 +1,132 @@
+This patch allows the user to specify desired packet types (outgoing,
+broadcast, unicast, etc.) on packet sockets via setsockopt.
+This can reduce the load in situations where only a limited number
+of packet types are necessary
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+
+--- a/include/linux/if_packet.h
++++ b/include/linux/if_packet.h
+@@ -29,6 +29,8 @@ struct sockaddr_ll {
+ /* These ones are invisible by user level */
+ #define PACKET_LOOPBACK		5		/* MC/BRD frame looped back */
+ #define PACKET_FASTROUTE	6		/* Fastrouted frame	*/
++#define PACKET_MASK_ANY		0xffffffff	/* mask for packet type bits */
++
+ 
+ /* Packet socket options */
+ 
+@@ -48,6 +50,7 @@ struct sockaddr_ll {
+ #define PACKET_LOSS			14
+ #define PACKET_VNET_HDR			15
+ #define PACKET_TX_TIMESTAMP		16
++#define PACKET_RECV_TYPE		17
+ 
+ struct tpacket_stats {
+ 	unsigned int	tp_packets;
+--- a/net/packet/af_packet.c
++++ b/net/packet/af_packet.c
+@@ -202,6 +202,7 @@ struct packet_sock {
+ 	unsigned int		tp_reserve;
+ 	unsigned int		tp_loss:1;
+ 	struct packet_type	prot_hook ____cacheline_aligned_in_smp;
++	__u8			pkt_type:3;
+ };
+ 
+ struct packet_skb_cb {
+@@ -336,6 +337,7 @@ static int packet_rcv_spkt(struct sk_buf
+ {
+ 	struct sock *sk;
+ 	struct sockaddr_pkt *spkt;
++	struct packet_sock *po;
+ 
+ 	/*
+ 	 *	When we registered the protocol we saved the socket in the data
+@@ -343,6 +345,7 @@ static int packet_rcv_spkt(struct sk_buf
+ 	 */
+ 
+ 	sk = pt->af_packet_priv;
++	po = pkt_sk(sk);
+ 
+ 	/*
+ 	 *	Yank back the headers [hope the device set this
+@@ -355,7 +358,7 @@ static int packet_rcv_spkt(struct sk_buf
+ 	 *	so that this procedure is noop.
+ 	 */
+ 
+-	if (skb->pkt_type == PACKET_LOOPBACK)
++	if (!(po->pkt_type & (1 << skb->pkt_type)))
+ 		goto out;
+ 
+ 	if (!net_eq(dev_net(dev), sock_net(sk)))
+@@ -531,12 +534,12 @@ static int packet_rcv(struct sk_buff *sk
+ 	int skb_len = skb->len;
+ 	unsigned int snaplen, res;
+ 
+-	if (skb->pkt_type == PACKET_LOOPBACK)
+-		goto drop;
+-
+ 	sk = pt->af_packet_priv;
+ 	po = pkt_sk(sk);
+ 
++	if (!(po->pkt_type & (1 << skb->pkt_type)))
++		goto drop;
++
+ 	if (!net_eq(dev_net(dev), sock_net(sk)))
+ 		goto drop;
+ 
+@@ -651,12 +654,12 @@ static int tpacket_rcv(struct sk_buff *s
+ 	struct timeval tv;
+ 	struct timespec ts;
+ 
+-	if (skb->pkt_type == PACKET_LOOPBACK)
+-		goto drop;
+-
+ 	sk = pt->af_packet_priv;
+ 	po = pkt_sk(sk);
+ 
++	if (!(po->pkt_type & (1 << skb->pkt_type)))
++		goto drop;
++
+ 	if (!net_eq(dev_net(dev), sock_net(sk)))
+ 		goto drop;
+ 
+@@ -1464,6 +1467,7 @@ static int packet_create(struct net *net
+ 	spin_lock_init(&po->bind_lock);
+ 	mutex_init(&po->pg_vec_lock);
+ 	po->prot_hook.func = packet_rcv;
++	po->pkt_type = PACKET_MASK_ANY & ~(1 << PACKET_LOOPBACK);
+ 
+ 	if (sock->type == SOCK_PACKET)
+ 		po->prot_hook.func = packet_rcv_spkt;
+@@ -1968,6 +1972,16 @@ packet_setsockopt(struct socket *sock, i
+ 		po->has_vnet_hdr = !!val;
+ 		return 0;
+ 	}
++        case PACKET_RECV_TYPE:
++        {
++                unsigned int val;
++                if (optlen != sizeof(val))
++                        return -EINVAL;
++                if (copy_from_user(&val, optval, sizeof(val)))
++                        return -EFAULT;
++                po->pkt_type = val & ~PACKET_LOOPBACK;
++                return 0;
++        }
+ 	default:
+ 		return -ENOPROTOOPT;
+ 	}
+@@ -2025,6 +2039,13 @@ static int packet_getsockopt(struct sock
+ 
+ 		data = &val;
+ 		break;
++	case PACKET_RECV_TYPE:
++		if (len > sizeof(unsigned int))
++			len = sizeof(unsigned int);
++		val = po->pkt_type;
++
++		data = &val;
++		break;
+ 	case PACKET_VERSION:
+ 		if (len > sizeof(int))
+ 			len = sizeof(int);
diff --git a/target/linux/generic/patches-2.6.35/250-pppoe_header_pad.patch b/target/linux/generic/patches-2.6.35/250-pppoe_header_pad.patch
new file mode 100644
index 0000000000..a2535db60e
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/250-pppoe_header_pad.patch
@@ -0,0 +1,20 @@
+--- a/drivers/net/pppoe.c
++++ b/drivers/net/pppoe.c
+@@ -862,7 +862,7 @@ static int pppoe_sendmsg(struct kiocb *i
+ 		goto end;
+ 
+ 
+-	skb = sock_wmalloc(sk, total_len + dev->hard_header_len + 32,
++	skb = sock_wmalloc(sk, total_len + dev->hard_header_len + 32 + NET_SKB_PAD,
+ 			   0, GFP_KERNEL);
+ 	if (!skb) {
+ 		error = -ENOMEM;
+@@ -870,7 +870,7 @@ static int pppoe_sendmsg(struct kiocb *i
+ 	}
+ 
+ 	/* Reserve space for headers. */
+-	skb_reserve(skb, dev->hard_header_len);
++	skb_reserve(skb, dev->hard_header_len + NET_SKB_PAD);
+ 	skb_reset_network_header(skb);
+ 
+ 	skb->dev = dev;
diff --git a/target/linux/generic/patches-2.6.35/260-crypto_optional_tests.patch b/target/linux/generic/patches-2.6.35/260-crypto_optional_tests.patch
new file mode 100644
index 0000000000..f431f5d0ca
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/260-crypto_optional_tests.patch
@@ -0,0 +1,63 @@
+--- a/crypto/Kconfig
++++ b/crypto/Kconfig
+@@ -96,6 +96,10 @@ config CRYPTO_MANAGER2
+ 	select CRYPTO_BLKCIPHER2
+ 	select CRYPTO_PCOMP
+ 
++config CRYPTO_MANAGER_NO_TESTS
++	bool "Disable internal testsuite to save space"
++	depends on CRYPTO_MANAGER
++
+ config CRYPTO_GF128MUL
+ 	tristate "GF(2^128) multiplication functions (EXPERIMENTAL)"
+ 	depends on EXPERIMENTAL
+--- a/crypto/testmgr.c
++++ b/crypto/testmgr.c
+@@ -47,6 +47,8 @@
+ #define ENCRYPT 1
+ #define DECRYPT 0
+ 
++#ifndef CONFIG_CRYPTO_MANAGER_NO_TESTS
++
+ struct tcrypt_result {
+ 	struct completion completion;
+ 	int err;
+@@ -2443,8 +2445,11 @@ static int alg_find_test(const char *alg
+ 	return -1;
+ }
+ 
++#endif /* CONFIG_CRYPTO_MANAGER_NO_TESTS */
++
+ int alg_test(const char *driver, const char *alg, u32 type, u32 mask)
+ {
++#ifndef CONFIG_CRYPTO_MANAGER_NO_TESTS
+ 	int i;
+ 	int j;
+ 	int rc;
+@@ -2499,5 +2504,8 @@ notest:
+ 	return 0;
+ non_fips_alg:
+ 	return -EINVAL;
++#else /* CONFIG_CRYPTO_MANAGER_NO_TESTS */
++	return 0;
++#endif /* CONFIG_CRYPTO_MANAGER_NO_TESTS */
+ }
+ EXPORT_SYMBOL_GPL(alg_test);
+--- a/crypto/testmgr.h
++++ b/crypto/testmgr.h
+@@ -20,6 +20,8 @@
+ 
+ #include <crypto/compress.h>
+ 
++#ifndef CONFIG_CRYPTO_MANAGER_NO_TESTS
++
+ #define MAX_DIGEST_SIZE		64
+ #define MAX_TAP			8
+ 
+@@ -9552,4 +9554,6 @@ static struct hash_testvec crc32c_tv_tem
+ 	},
+ };
+ 
++#endif /* CONFIG_CRYPTO_MANAGER_NO_TESTS */
++
+ #endif	/* _CRYPTO_TESTMGR_H */
diff --git a/target/linux/generic/patches-2.6.35/400-ledtrig_morse.patch b/target/linux/generic/patches-2.6.35/400-ledtrig_morse.patch
new file mode 100644
index 0000000000..3f43c90aca
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/400-ledtrig_morse.patch
@@ -0,0 +1,18 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -354,4 +354,8 @@ endif # LEDS_TRIGGERS
+ 
+ endif # LEDS_CLASS
+ 
++config LEDS_TRIGGER_MORSE
++	tristate "LED Morse Trigger"
++	depends on LEDS_TRIGGERS
++
+ endif # NEW_LEDS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -46,3 +46,4 @@ obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT)	+=
+ obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT)	+= ledtrig-backlight.o
+ obj-$(CONFIG_LEDS_TRIGGER_GPIO)		+= ledtrig-gpio.o
+ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
++obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o
diff --git a/target/linux/generic/patches-2.6.35/402-ledtrig_netdev.patch b/target/linux/generic/patches-2.6.35/402-ledtrig_netdev.patch
new file mode 100644
index 0000000000..858966c908
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/402-ledtrig_netdev.patch
@@ -0,0 +1,21 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -358,4 +358,11 @@ config LEDS_TRIGGER_MORSE
+ 	tristate "LED Morse Trigger"
+ 	depends on LEDS_TRIGGERS
+ 
++config LEDS_TRIGGER_NETDEV
++	tristate "LED Netdev Trigger"
++	depends on NET && LEDS_TRIGGERS
++	help
++	  This allows LEDs to be controlled by network device activity.
++	  If unsure, say Y.
++
+ endif # NEW_LEDS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -47,3 +47,4 @@ obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT)	+=
+ obj-$(CONFIG_LEDS_TRIGGER_GPIO)		+= ledtrig-gpio.o
+ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON)	+= ledtrig-default-on.o
+ obj-$(CONFIG_LEDS_TRIGGER_MORSE)	+= ledtrig-morse.o
++obj-$(CONFIG_LEDS_TRIGGER_NETDEV)      += ledtrig-netdev.o
diff --git a/target/linux/generic/patches-2.6.35/410-gpio_buttons.patch b/target/linux/generic/patches-2.6.35/410-gpio_buttons.patch
new file mode 100644
index 0000000000..e38c31de40
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/410-gpio_buttons.patch
@@ -0,0 +1,31 @@
+--- a/drivers/input/misc/Kconfig
++++ b/drivers/input/misc/Kconfig
+@@ -340,4 +340,20 @@ config INPUT_PCAP
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called pcap_keys.
+ 
++config INPUT_GPIO_BUTTONS
++	tristate "Polled GPIO buttons interface"
++	depends on GENERIC_GPIO
++	select INPUT_POLLDEV
++	help
++	  This driver implements support for buttons connected
++	  to GPIO pins of various CPUs (and some other chips).
++
++	  Say Y here if your device has buttons connected
++	  directly to such GPIO pins.  Your board-specific
++	  setup logic must also provide a platform device,
++	  with configuration data saying which GPIOs are used.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called gpio-buttons.
++
+ endif
+--- a/drivers/input/misc/Makefile
++++ b/drivers/input/misc/Makefile
+@@ -32,4 +32,5 @@ obj-$(CONFIG_INPUT_WINBOND_CIR)		+= winb
+ obj-$(CONFIG_INPUT_WISTRON_BTNS)	+= wistron_btns.o
+ obj-$(CONFIG_INPUT_WM831X_ON)		+= wm831x-on.o
+ obj-$(CONFIG_INPUT_YEALINK)		+= yealink.o
++obj-$(CONFIG_INPUT_GPIO_BUTTONS)	+= gpio_buttons.o
+ 
diff --git a/target/linux/generic/patches-2.6.35/420-gpiodev.patch b/target/linux/generic/patches-2.6.35/420-gpiodev.patch
new file mode 100644
index 0000000000..27da3c7812
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/420-gpiodev.patch
@@ -0,0 +1,27 @@
+--- a/drivers/char/Kconfig
++++ b/drivers/char/Kconfig
+@@ -1024,6 +1024,14 @@ config CS5535_GPIO
+ 
+ 	  If compiled as a module, it will be called cs5535_gpio.
+ 
++config GPIO_DEVICE
++	tristate "GPIO device support"
++	depends on GENERIC_GPIO
++	help
++	  Say Y to enable Linux GPIO device support.  This allows control of
++	  GPIO pins using a character device
++
++
+ config RAW_DRIVER
+ 	tristate "RAW driver (/dev/raw/rawN)"
+ 	depends on BLOCK
+--- a/drivers/char/Makefile
++++ b/drivers/char/Makefile
+@@ -95,6 +95,7 @@ obj-$(CONFIG_SCx200_GPIO)	+= scx200_gpio
+ obj-$(CONFIG_PC8736x_GPIO)	+= pc8736x_gpio.o
+ obj-$(CONFIG_NSC_GPIO)		+= nsc_gpio.o
+ obj-$(CONFIG_CS5535_GPIO)	+= cs5535_gpio.o
++obj-$(CONFIG_GPIO_DEVICE)	+= gpio_dev.o
+ obj-$(CONFIG_GPIO_TB0219)	+= tb0219.o
+ obj-$(CONFIG_TELCLOCK)		+= tlclk.o
+ 
diff --git a/target/linux/generic/patches-2.6.35/430-scsi_header_fix.patch b/target/linux/generic/patches-2.6.35/430-scsi_header_fix.patch
new file mode 100644
index 0000000000..59e4333611
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/430-scsi_header_fix.patch
@@ -0,0 +1,17 @@
+--- a/include/scsi/scsi.h
++++ b/include/scsi/scsi.h
+@@ -149,10 +149,10 @@ struct scsi_cmnd;
+ 
+ /* defined in T10 SCSI Primary Commands-2 (SPC2) */
+ struct scsi_varlen_cdb_hdr {
+-	u8 opcode;        /* opcode always == VARIABLE_LENGTH_CMD */
+-	u8 control;
+-	u8 misc[5];
+-	u8 additional_cdb_length;         /* total cdb length - 8 */
++	__u8 opcode;        /* opcode always == VARIABLE_LENGTH_CMD */
++	__u8 control;
++	__u8 misc[5];
++	__u8 additional_cdb_length;         /* total cdb length - 8 */
+ 	__be16 service_action;
+ 	/* service specific data follows */
+ };
diff --git a/target/linux/generic/patches-2.6.35/510-yaffs_support.patch b/target/linux/generic/patches-2.6.35/510-yaffs_support.patch
new file mode 100644
index 0000000000..192181f005
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/510-yaffs_support.patch
@@ -0,0 +1,18 @@
+--- a/fs/Kconfig
++++ b/fs/Kconfig
+@@ -44,6 +44,7 @@ source "fs/gfs2/Kconfig"
+ source "fs/ocfs2/Kconfig"
+ source "fs/btrfs/Kconfig"
+ source "fs/nilfs2/Kconfig"
++source "fs/yaffs2/Kconfig"
+ 
+ endif # BLOCK
+ 
+--- a/fs/Makefile
++++ b/fs/Makefile
+@@ -127,3 +127,5 @@ obj-$(CONFIG_BTRFS_FS)		+= btrfs/
+ obj-$(CONFIG_GFS2_FS)           += gfs2/
+ obj-$(CONFIG_EXOFS_FS)          += exofs/
+ obj-$(CONFIG_CEPH_FS)		+= ceph/
++obj-$(CONFIG_YAFFS_FS)		+= yaffs2/
++
diff --git a/target/linux/generic/patches-2.6.35/511-yaffs-cvs-2009-04-24.patch b/target/linux/generic/patches-2.6.35/511-yaffs-cvs-2009-04-24.patch
new file mode 100644
index 0000000000..c40da10d69
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/511-yaffs-cvs-2009-04-24.patch
@@ -0,0 +1,12344 @@
+--- a/fs/yaffs2/devextras.h
++++ b/fs/yaffs2/devextras.h
+@@ -14,194 +14,135 @@
+  */
+ 
+ /*
+- * This file is just holds extra declarations used during development.
+- * Most of these are from kernel includes placed here so we can use them in
+- * applications.
++ * This file is just holds extra declarations of macros that would normally
++ * be providesd in the Linux kernel. These macros have been written from
++ * scratch but are functionally equivalent to the Linux ones.
+  *
+  */
+ 
+ #ifndef __EXTRAS_H__
+ #define __EXTRAS_H__
+ 
+-#if defined WIN32
+-#define __inline__ __inline
+-#define new newHack
+-#endif
+-
+-#if !(defined __KERNEL__) || (defined WIN32)
+ 
+-/* User space defines */
++#if !(defined __KERNEL__)
+ 
++/* Definition of types */
+ typedef unsigned char __u8;
+ typedef unsigned short __u16;
+ typedef unsigned __u32;
+ 
++#endif
++
+ /*
+- * Simple doubly linked list implementation.
+- *
+- * Some of the internal functions ("__xxx") are useful when
+- * manipulating whole lists rather than single entries, as
+- * sometimes we already know the next/prev entries and we can
+- * generate better code by using them directly rather than
+- * using the generic single-entry routines.
++ * This is a simple doubly linked list implementation that matches the
++ * way the Linux kernel doubly linked list implementation works.
+  */
+ 
+-#define prefetch(x) 1
+-
+-struct list_head {
+-	struct list_head *next, *prev;
++struct ylist_head {
++	struct ylist_head *next; /* next in chain */
++	struct ylist_head *prev; /* previous in chain */
+ };
+ 
+-#define LIST_HEAD_INIT(name) { &(name), &(name) }
+ 
+-#define LIST_HEAD(name) \
+-	struct list_head name = LIST_HEAD_INIT(name)
++/* Initialise a static list */
++#define YLIST_HEAD(name) \
++struct ylist_head name = { &(name), &(name)}
++
+ 
+-#define INIT_LIST_HEAD(ptr) do { \
+-	(ptr)->next = (ptr); (ptr)->prev = (ptr); \
++
++/* Initialise a list head to an empty list */
++#define YINIT_LIST_HEAD(p) \
++do { \
++	(p)->next = (p);\
++	(p)->prev = (p); \
+ } while (0)
+ 
+-/*
+- * Insert a new entry between two known consecutive entries.
+- *
+- * This is only for internal list manipulation where we know
+- * the prev/next entries already!
+- */
+-static __inline__ void __list_add(struct list_head *new,
+-				  struct list_head *prev,
+-				  struct list_head *next)
+-{
+-	next->prev = new;
+-	new->next = next;
+-	new->prev = prev;
+-	prev->next = new;
+-}
+ 
+-/**
+- * list_add - add a new entry
+- * @new: new entry to be added
+- * @head: list head to add it after
+- *
+- * Insert a new entry after the specified head.
+- * This is good for implementing stacks.
+- */
+-static __inline__ void list_add(struct list_head *new, struct list_head *head)
++/* Add an element to a list */
++static __inline__ void ylist_add(struct ylist_head *newEntry,
++				struct ylist_head *list)
+ {
+-	__list_add(new, head, head->next);
+-}
++	struct ylist_head *listNext = list->next;
++
++	list->next = newEntry;
++	newEntry->prev = list;
++	newEntry->next = listNext;
++	listNext->prev = newEntry;
+ 
+-/**
+- * list_add_tail - add a new entry
+- * @new: new entry to be added
+- * @head: list head to add it before
+- *
+- * Insert a new entry before the specified head.
+- * This is useful for implementing queues.
+- */
+-static __inline__ void list_add_tail(struct list_head *new,
+-				     struct list_head *head)
+-{
+-	__list_add(new, head->prev, head);
+ }
+ 
+-/*
+- * Delete a list entry by making the prev/next entries
+- * point to each other.
+- *
+- * This is only for internal list manipulation where we know
+- * the prev/next entries already!
+- */
+-static __inline__ void __list_del(struct list_head *prev,
+-				  struct list_head *next)
++static __inline__ void ylist_add_tail(struct ylist_head *newEntry,
++				 struct ylist_head *list)
+ {
+-	next->prev = prev;
+-	prev->next = next;
++	struct ylist_head *listPrev = list->prev;
++
++	list->prev = newEntry;
++	newEntry->next = list;
++	newEntry->prev = listPrev;
++	listPrev->next = newEntry;
++
+ }
+ 
+-/**
+- * list_del - deletes entry from list.
+- * @entry: the element to delete from the list.
+- * Note: list_empty on entry does not return true after this, the entry is
+- * in an undefined state.
+- */
+-static __inline__ void list_del(struct list_head *entry)
++
++/* Take an element out of its current list, with or without
++ * reinitialising the links.of the entry*/
++static __inline__ void ylist_del(struct ylist_head *entry)
+ {
+-	__list_del(entry->prev, entry->next);
++	struct ylist_head *listNext = entry->next;
++	struct ylist_head *listPrev = entry->prev;
++
++	listNext->prev = listPrev;
++	listPrev->next = listNext;
++
+ }
+ 
+-/**
+- * list_del_init - deletes entry from list and reinitialize it.
+- * @entry: the element to delete from the list.
+- */
+-static __inline__ void list_del_init(struct list_head *entry)
++static __inline__ void ylist_del_init(struct ylist_head *entry)
+ {
+-	__list_del(entry->prev, entry->next);
+-	INIT_LIST_HEAD(entry);
++	ylist_del(entry);
++	entry->next = entry->prev = entry;
+ }
+ 
+-/**
+- * list_empty - tests whether a list is empty
+- * @head: the list to test.
+- */
+-static __inline__ int list_empty(struct list_head *head)
++
++/* Test if the list is empty */
++static __inline__ int ylist_empty(struct ylist_head *entry)
+ {
+-	return head->next == head;
++	return (entry->next == entry);
+ }
+ 
+-/**
+- * list_splice - join two lists
+- * @list: the new list to add.
+- * @head: the place to add it in the first list.
++
++/* ylist_entry takes a pointer to a list entry and offsets it to that
++ * we can find a pointer to the object it is embedded in.
+  */
+-static __inline__ void list_splice(struct list_head *list,
+-				   struct list_head *head)
+-{
+-	struct list_head *first = list->next;
+ 
+-	if (first != list) {
+-		struct list_head *last = list->prev;
+-		struct list_head *at = head->next;
+-
+-		first->prev = head;
+-		head->next = first;
+-
+-		last->next = at;
+-		at->prev = last;
+-	}
+-}
+ 
+-/**
+- * list_entry - get the struct for this entry
+- * @ptr:	the &struct list_head pointer.
+- * @type:	the type of the struct this is embedded in.
+- * @member:	the name of the list_struct within the struct.
+- */
+-#define list_entry(ptr, type, member) \
+-	((type *)((char *)(ptr)-(unsigned long)(&((type *)0)->member)))
+-
+-/**
+- * list_for_each	-	iterate over a list
+- * @pos:	the &struct list_head to use as a loop counter.
+- * @head:	the head for your list.
+- */
+-#define list_for_each(pos, head) \
+-	for (pos = (head)->next, prefetch(pos->next); pos != (head); \
+-        	pos = pos->next, prefetch(pos->next))
+-
+-/**
+- * list_for_each_safe	-	iterate over a list safe against removal
+- *                              of list entry
+- * @pos:	the &struct list_head to use as a loop counter.
+- * @n:		another &struct list_head to use as temporary storage
+- * @head:	the head for your list.
+- */
+-#define list_for_each_safe(pos, n, head) \
+-	for (pos = (head)->next, n = pos->next; pos != (head); \
+-		pos = n, n = pos->next)
++#define ylist_entry(entry, type, member) \
++	((type *)((char *)(entry)-(unsigned long)(&((type *)NULL)->member)))
+ 
+-/*
+- * File types
++
++/* ylist_for_each and list_for_each_safe  iterate over lists.
++ * ylist_for_each_safe uses temporary storage to make the list delete safe
+  */
++
++#define ylist_for_each(itervar, list) \
++	for (itervar = (list)->next; itervar != (list); itervar = itervar->next)
++
++#define ylist_for_each_safe(itervar, saveVar, list) \
++	for (itervar = (list)->next, saveVar = (list)->next->next; \
++		itervar != (list); itervar = saveVar, saveVar = saveVar->next)
++
++
++#if !(defined __KERNEL__)
++
++
++#ifndef WIN32
++#include <sys/stat.h>
++#endif
++
++
++#ifdef CONFIG_YAFFS_PROVIDE_DEFS
++/* File types */
++
++
+ #define DT_UNKNOWN	0
+ #define DT_FIFO		1
+ #define DT_CHR		2
+@@ -212,6 +153,7 @@ static __inline__ void list_splice(struc
+ #define DT_SOCK		12
+ #define DT_WHT		14
+ 
++
+ #ifndef WIN32
+ #include <sys/stat.h>
+ #endif
+@@ -227,10 +169,6 @@ static __inline__ void list_splice(struc
+ #define ATTR_ATIME	16
+ #define ATTR_MTIME	32
+ #define ATTR_CTIME	64
+-#define ATTR_ATIME_SET	128
+-#define ATTR_MTIME_SET	256
+-#define ATTR_FORCE	512	/* Not a change, but a change it */
+-#define ATTR_ATTR_FLAG	1024
+ 
+ struct iattr {
+ 	unsigned int ia_valid;
+@@ -244,21 +182,15 @@ struct iattr {
+ 	unsigned int ia_attr_flags;
+ };
+ 
+-#define KERN_DEBUG
++#endif
+ 
+ #else
+ 
+-#ifndef WIN32
+ #include <linux/types.h>
+-#include <linux/list.h>
+ #include <linux/fs.h>
+ #include <linux/stat.h>
+-#endif
+ 
+ #endif
+ 
+-#if defined WIN32
+-#undef new
+-#endif
+ 
+ #endif
+--- a/fs/yaffs2/Kconfig
++++ b/fs/yaffs2/Kconfig
+@@ -5,7 +5,7 @@
+ config YAFFS_FS
+ 	tristate "YAFFS2 file system support"
+ 	default n
+-	depends on MTD
++	depends on MTD_BLOCK
+ 	select YAFFS_YAFFS1
+ 	select YAFFS_YAFFS2
+ 	help
+@@ -43,7 +43,8 @@ config YAFFS_9BYTE_TAGS
+ 	  format that you need to continue to support.  New data written
+ 	  also uses the older-style format.  Note: Use of this option
+ 	  generally requires that MTD's oob layout be adjusted to use the
+-	  older-style format.  See notes on tags formats and MTD versions.
++	  older-style format.  See notes on tags formats and MTD versions
++	  in yaffs_mtdif1.c.
+ 
+ 	  If unsure, say N.
+ 
+@@ -109,26 +110,6 @@ config YAFFS_DISABLE_LAZY_LOAD
+ 
+ 	  If unsure, say N.
+ 
+-config YAFFS_CHECKPOINT_RESERVED_BLOCKS
+-	int "Reserved blocks for checkpointing"
+-	depends on YAFFS_YAFFS2
+-	default 10
+-	help
+-          Give the number of Blocks to reserve for checkpointing.
+-	  Checkpointing saves the state at unmount so that mounting is
+-	  much faster as a scan of all the flash to regenerate this state
+-	  is not needed.  These Blocks are reserved per partition, so if
+-	  you have very small partitions the default (10) may be a mess
+-	  for you.  You can set this value to 0, but that does not mean
+-	  checkpointing is disabled at all. There only won't be any
+-	  specially reserved blocks for checkpointing, so if there is
+-	  enough free space on the filesystem, it will be used for
+-	  checkpointing.
+-
+-	  If unsure, leave at default (10), but don't wonder if there are
+-	  always 2MB used on your large page device partition (10 x 2k
+-	  pagesize). When using small partitions or when being very small
+-	  on space, you probably want to set this to zero.
+ 
+ config YAFFS_DISABLE_WIDE_TNODES
+ 	bool "Turn off wide tnodes"
+--- a/fs/yaffs2/Makefile
++++ b/fs/yaffs2/Makefile
+@@ -5,7 +5,6 @@
+ obj-$(CONFIG_YAFFS_FS) += yaffs.o
+ 
+ yaffs-y := yaffs_ecc.o yaffs_fs.o yaffs_guts.o yaffs_checkptrw.o
+-yaffs-y += yaffs_packedtags2.o yaffs_nand.o yaffs_qsort.o
++yaffs-y += yaffs_packedtags1.o yaffs_packedtags2.o yaffs_nand.o yaffs_qsort.o
+ yaffs-y += yaffs_tagscompat.o yaffs_tagsvalidity.o
+-yaffs-y += yaffs_mtdif1.o yaffs_packedtags1.o
+-yaffs-y += yaffs_mtdif.o yaffs_mtdif2.o
++yaffs-y += yaffs_mtdif.o yaffs_mtdif1.o yaffs_mtdif2.o
+--- a/fs/yaffs2/moduleconfig.h
++++ b/fs/yaffs2/moduleconfig.h
+@@ -27,12 +27,12 @@
+ 
+ /* Default: Not selected */
+ /* Meaning: Yaffs does its own ECC, rather than using MTD ECC */
+-//#define CONFIG_YAFFS_DOES_ECC
++/* #define CONFIG_YAFFS_DOES_ECC */
+ 
+ /* Default: Not selected */
+ /* Meaning: ECC byte order is 'wrong'.  Only meaningful if */
+ /*          CONFIG_YAFFS_DOES_ECC is set */
+-//#define CONFIG_YAFFS_ECC_WRONG_ORDER
++/* #define CONFIG_YAFFS_ECC_WRONG_ORDER */
+ 
+ /* Default: Selected */
+ /* Meaning: Disables testing whether chunks are erased before writing to them*/
+@@ -54,11 +54,11 @@ that you need to continue to support.  N
+ older-style format.
+ Note: Use of this option generally requires that MTD's oob layout be
+ adjusted to use the older-style format.  See notes on tags formats and
+-MTD versions.
++MTD versions in yaffs_mtdif1.c.
+ */
+ /* Default: Not selected */
+ /* Meaning: Use older-style on-NAND data format with pageStatus byte */
+-#define CONFIG_YAFFS_9BYTE_TAGS
++/* #define CONFIG_YAFFS_9BYTE_TAGS */
+ 
+ #endif /* YAFFS_OUT_OF_TREE */
+ 
+--- a/fs/yaffs2/yaffs_checkptrw.c
++++ b/fs/yaffs2/yaffs_checkptrw.c
+@@ -12,48 +12,43 @@
+  */
+ 
+ const char *yaffs_checkptrw_c_version =
+-    "$Id: yaffs_checkptrw.c,v 1.14 2007-05-15 20:07:40 charles Exp $";
++	"$Id: yaffs_checkptrw.c,v 1.18 2009-03-06 17:20:49 wookey Exp $";
+ 
+ 
+ #include "yaffs_checkptrw.h"
+-
++#include "yaffs_getblockinfo.h"
+ 
+ static int yaffs_CheckpointSpaceOk(yaffs_Device *dev)
+ {
+-
+ 	int blocksAvailable = dev->nErasedBlocks - dev->nReservedBlocks;
+ 
+ 	T(YAFFS_TRACE_CHECKPOINT,
+ 		(TSTR("checkpt blocks available = %d" TENDSTR),
+ 		blocksAvailable));
+ 
+-
+ 	return (blocksAvailable <= 0) ? 0 : 1;
+ }
+ 
+ 
+ static int yaffs_CheckpointErase(yaffs_Device *dev)
+ {
+-
+ 	int i;
+ 
+-
+-	if(!dev->eraseBlockInNAND)
++	if (!dev->eraseBlockInNAND)
+ 		return 0;
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("checking blocks %d to %d"TENDSTR),
+-		dev->internalStartBlock,dev->internalEndBlock));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("checking blocks %d to %d"TENDSTR),
++		dev->internalStartBlock, dev->internalEndBlock));
+ 
+-	for(i = dev->internalStartBlock; i <= dev->internalEndBlock; i++) {
+-		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,i);
+-		if(bi->blockState == YAFFS_BLOCK_STATE_CHECKPOINT){
+-			T(YAFFS_TRACE_CHECKPOINT,(TSTR("erasing checkpt block %d"TENDSTR),i));
+-			if(dev->eraseBlockInNAND(dev,i- dev->blockOffset /* realign */)){
++	for (i = dev->internalStartBlock; i <= dev->internalEndBlock; i++) {
++		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, i);
++		if (bi->blockState == YAFFS_BLOCK_STATE_CHECKPOINT) {
++			T(YAFFS_TRACE_CHECKPOINT, (TSTR("erasing checkpt block %d"TENDSTR), i));
++			if (dev->eraseBlockInNAND(dev, i - dev->blockOffset /* realign */)) {
+ 				bi->blockState = YAFFS_BLOCK_STATE_EMPTY;
+ 				dev->nErasedBlocks++;
+ 				dev->nFreeChunks += dev->nChunksPerBlock;
+-			}
+-			else {
+-				dev->markNANDBlockBad(dev,i);
++			} else {
++				dev->markNANDBlockBad(dev, i);
+ 				bi->blockState = YAFFS_BLOCK_STATE_DEAD;
+ 			}
+ 		}
+@@ -71,23 +66,23 @@ static void yaffs_CheckpointFindNextEras
+ 	int blocksAvailable = dev->nErasedBlocks - dev->nReservedBlocks;
+ 	T(YAFFS_TRACE_CHECKPOINT,
+ 		(TSTR("allocating checkpt block: erased %d reserved %d avail %d next %d "TENDSTR),
+-		dev->nErasedBlocks,dev->nReservedBlocks,blocksAvailable,dev->checkpointNextBlock));
++		dev->nErasedBlocks, dev->nReservedBlocks, blocksAvailable, dev->checkpointNextBlock));
+ 
+-	if(dev->checkpointNextBlock >= 0 &&
+-	   dev->checkpointNextBlock <= dev->internalEndBlock &&
+-	   blocksAvailable > 0){
+-
+-		for(i = dev->checkpointNextBlock; i <= dev->internalEndBlock; i++){
+-			yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,i);
+-			if(bi->blockState == YAFFS_BLOCK_STATE_EMPTY){
++	if (dev->checkpointNextBlock >= 0 &&
++			dev->checkpointNextBlock <= dev->internalEndBlock &&
++			blocksAvailable > 0) {
++
++		for (i = dev->checkpointNextBlock; i <= dev->internalEndBlock; i++) {
++			yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, i);
++			if (bi->blockState == YAFFS_BLOCK_STATE_EMPTY) {
+ 				dev->checkpointNextBlock = i + 1;
+ 				dev->checkpointCurrentBlock = i;
+-				T(YAFFS_TRACE_CHECKPOINT,(TSTR("allocating checkpt block %d"TENDSTR),i));
++				T(YAFFS_TRACE_CHECKPOINT, (TSTR("allocating checkpt block %d"TENDSTR), i));
+ 				return;
+ 			}
+ 		}
+ 	}
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("out of checkpt blocks"TENDSTR)));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("out of checkpt blocks"TENDSTR)));
+ 
+ 	dev->checkpointNextBlock = -1;
+ 	dev->checkpointCurrentBlock = -1;
+@@ -98,30 +93,31 @@ static void yaffs_CheckpointFindNextChec
+ 	int  i;
+ 	yaffs_ExtendedTags tags;
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("find next checkpt block: start:  blocks %d next %d" TENDSTR),
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("find next checkpt block: start:  blocks %d next %d" TENDSTR),
+ 		dev->blocksInCheckpoint, dev->checkpointNextBlock));
+ 
+-	if(dev->blocksInCheckpoint < dev->checkpointMaxBlocks)
+-		for(i = dev->checkpointNextBlock; i <= dev->internalEndBlock; i++){
++	if (dev->blocksInCheckpoint < dev->checkpointMaxBlocks)
++		for (i = dev->checkpointNextBlock; i <= dev->internalEndBlock; i++) {
+ 			int chunk = i * dev->nChunksPerBlock;
+ 			int realignedChunk = chunk - dev->chunkOffset;
+ 
+-			dev->readChunkWithTagsFromNAND(dev,realignedChunk,NULL,&tags);
+-			T(YAFFS_TRACE_CHECKPOINT,(TSTR("find next checkpt block: search: block %d oid %d seq %d eccr %d" TENDSTR),
+-				i, tags.objectId,tags.sequenceNumber,tags.eccResult));
++			dev->readChunkWithTagsFromNAND(dev, realignedChunk,
++					NULL, &tags);
++			T(YAFFS_TRACE_CHECKPOINT, (TSTR("find next checkpt block: search: block %d oid %d seq %d eccr %d" TENDSTR),
++				i, tags.objectId, tags.sequenceNumber, tags.eccResult));
+ 
+-			if(tags.sequenceNumber == YAFFS_SEQUENCE_CHECKPOINT_DATA){
++			if (tags.sequenceNumber == YAFFS_SEQUENCE_CHECKPOINT_DATA) {
+ 				/* Right kind of block */
+ 				dev->checkpointNextBlock = tags.objectId;
+ 				dev->checkpointCurrentBlock = i;
+ 				dev->checkpointBlockList[dev->blocksInCheckpoint] = i;
+ 				dev->blocksInCheckpoint++;
+-				T(YAFFS_TRACE_CHECKPOINT,(TSTR("found checkpt block %d"TENDSTR),i));
++				T(YAFFS_TRACE_CHECKPOINT, (TSTR("found checkpt block %d"TENDSTR), i));
+ 				return;
+ 			}
+ 		}
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("found no more checkpt blocks"TENDSTR)));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("found no more checkpt blocks"TENDSTR)));
+ 
+ 	dev->checkpointNextBlock = -1;
+ 	dev->checkpointCurrentBlock = -1;
+@@ -133,17 +129,17 @@ int yaffs_CheckpointOpen(yaffs_Device *d
+ 
+ 	/* Got the functions we need? */
+ 	if (!dev->writeChunkWithTagsToNAND ||
+-	    !dev->readChunkWithTagsFromNAND ||
+-	    !dev->eraseBlockInNAND ||
+-	    !dev->markNANDBlockBad)
++			!dev->readChunkWithTagsFromNAND ||
++			!dev->eraseBlockInNAND ||
++			!dev->markNANDBlockBad)
+ 		return 0;
+ 
+-	if(forWriting && !yaffs_CheckpointSpaceOk(dev))
++	if (forWriting && !yaffs_CheckpointSpaceOk(dev))
+ 		return 0;
+ 
+-	if(!dev->checkpointBuffer)
+-		dev->checkpointBuffer = YMALLOC_DMA(dev->nDataBytesPerChunk);
+-	if(!dev->checkpointBuffer)
++	if (!dev->checkpointBuffer)
++		dev->checkpointBuffer = YMALLOC_DMA(dev->totalBytesPerChunk);
++	if (!dev->checkpointBuffer)
+ 		return 0;
+ 
+ 
+@@ -159,12 +155,10 @@ int yaffs_CheckpointOpen(yaffs_Device *d
+ 	dev->checkpointNextBlock = dev->internalStartBlock;
+ 
+ 	/* Erase all the blocks in the checkpoint area */
+-	if(forWriting){
+-		memset(dev->checkpointBuffer,0,dev->nDataBytesPerChunk);
++	if (forWriting) {
++		memset(dev->checkpointBuffer, 0, dev->nDataBytesPerChunk);
+ 		dev->checkpointByteOffset = 0;
+ 		return yaffs_CheckpointErase(dev);
+-
+-
+ 	} else {
+ 		int i;
+ 		/* Set to a value that will kick off a read */
+@@ -174,7 +168,7 @@ int yaffs_CheckpointOpen(yaffs_Device *d
+ 		dev->blocksInCheckpoint = 0;
+ 		dev->checkpointMaxBlocks = (dev->internalEndBlock - dev->internalStartBlock)/16 + 2;
+ 		dev->checkpointBlockList = YMALLOC(sizeof(int) * dev->checkpointMaxBlocks);
+-		for(i = 0; i < dev->checkpointMaxBlocks; i++)
++		for (i = 0; i < dev->checkpointMaxBlocks; i++)
+ 			dev->checkpointBlockList[i] = -1;
+ 	}
+ 
+@@ -191,18 +185,17 @@ int yaffs_GetCheckpointSum(yaffs_Device
+ 
+ static int yaffs_CheckpointFlushBuffer(yaffs_Device *dev)
+ {
+-
+ 	int chunk;
+ 	int realignedChunk;
+ 
+ 	yaffs_ExtendedTags tags;
+ 
+-	if(dev->checkpointCurrentBlock < 0){
++	if (dev->checkpointCurrentBlock < 0) {
+ 		yaffs_CheckpointFindNextErasedBlock(dev);
+ 		dev->checkpointCurrentChunk = 0;
+ 	}
+ 
+-	if(dev->checkpointCurrentBlock < 0)
++	if (dev->checkpointCurrentBlock < 0)
+ 		return 0;
+ 
+ 	tags.chunkDeleted = 0;
+@@ -210,10 +203,10 @@ static int yaffs_CheckpointFlushBuffer(y
+ 	tags.chunkId = dev->checkpointPageSequence + 1;
+ 	tags.sequenceNumber =  YAFFS_SEQUENCE_CHECKPOINT_DATA;
+ 	tags.byteCount = dev->nDataBytesPerChunk;
+-	if(dev->checkpointCurrentChunk == 0){
++	if (dev->checkpointCurrentChunk == 0) {
+ 		/* First chunk we write for the block? Set block state to
+ 		   checkpoint */
+-		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,dev->checkpointCurrentBlock);
++		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, dev->checkpointCurrentBlock);
+ 		bi->blockState = YAFFS_BLOCK_STATE_CHECKPOINT;
+ 		dev->blocksInCheckpoint++;
+ 	}
+@@ -221,28 +214,29 @@ static int yaffs_CheckpointFlushBuffer(y
+ 	chunk = dev->checkpointCurrentBlock * dev->nChunksPerBlock + dev->checkpointCurrentChunk;
+ 
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("checkpoint wite buffer nand %d(%d:%d) objid %d chId %d" TENDSTR),
+-		chunk, dev->checkpointCurrentBlock, dev->checkpointCurrentChunk,tags.objectId,tags.chunkId));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("checkpoint wite buffer nand %d(%d:%d) objid %d chId %d" TENDSTR),
++		chunk, dev->checkpointCurrentBlock, dev->checkpointCurrentChunk, tags.objectId, tags.chunkId));
+ 
+ 	realignedChunk = chunk - dev->chunkOffset;
+ 
+-	dev->writeChunkWithTagsToNAND(dev,realignedChunk,dev->checkpointBuffer,&tags);
++	dev->writeChunkWithTagsToNAND(dev, realignedChunk,
++			dev->checkpointBuffer, &tags);
+ 	dev->checkpointByteOffset = 0;
+ 	dev->checkpointPageSequence++;
+ 	dev->checkpointCurrentChunk++;
+-	if(dev->checkpointCurrentChunk >= dev->nChunksPerBlock){
++	if (dev->checkpointCurrentChunk >= dev->nChunksPerBlock) {
+ 		dev->checkpointCurrentChunk = 0;
+ 		dev->checkpointCurrentBlock = -1;
+ 	}
+-	memset(dev->checkpointBuffer,0,dev->nDataBytesPerChunk);
++	memset(dev->checkpointBuffer, 0, dev->nDataBytesPerChunk);
+ 
+ 	return 1;
+ }
+ 
+ 
+-int yaffs_CheckpointWrite(yaffs_Device *dev,const void *data, int nBytes)
++int yaffs_CheckpointWrite(yaffs_Device *dev, const void *data, int nBytes)
+ {
+-	int i=0;
++	int i = 0;
+ 	int ok = 1;
+ 
+ 
+@@ -250,17 +244,14 @@ int yaffs_CheckpointWrite(yaffs_Device *
+ 
+ 
+ 
+-	if(!dev->checkpointBuffer)
++	if (!dev->checkpointBuffer)
+ 		return 0;
+ 
+-	if(!dev->checkpointOpenForWrite)
++	if (!dev->checkpointOpenForWrite)
+ 		return -1;
+ 
+-	while(i < nBytes && ok) {
+-
+-
+-
+-		dev->checkpointBuffer[dev->checkpointByteOffset] = *dataBytes ;
++	while (i < nBytes && ok) {
++		dev->checkpointBuffer[dev->checkpointByteOffset] = *dataBytes;
+ 		dev->checkpointSum += *dataBytes;
+ 		dev->checkpointXor ^= *dataBytes;
+ 
+@@ -270,18 +261,17 @@ int yaffs_CheckpointWrite(yaffs_Device *
+ 		dev->checkpointByteCount++;
+ 
+ 
+-		if(dev->checkpointByteOffset < 0 ||
++		if (dev->checkpointByteOffset < 0 ||
+ 		   dev->checkpointByteOffset >= dev->nDataBytesPerChunk)
+ 			ok = yaffs_CheckpointFlushBuffer(dev);
+-
+ 	}
+ 
+-	return 	i;
++	return i;
+ }
+ 
+ int yaffs_CheckpointRead(yaffs_Device *dev, void *data, int nBytes)
+ {
+-	int i=0;
++	int i = 0;
+ 	int ok = 1;
+ 	yaffs_ExtendedTags tags;
+ 
+@@ -291,52 +281,54 @@ int yaffs_CheckpointRead(yaffs_Device *d
+ 
+ 	__u8 *dataBytes = (__u8 *)data;
+ 
+-	if(!dev->checkpointBuffer)
++	if (!dev->checkpointBuffer)
+ 		return 0;
+ 
+-	if(dev->checkpointOpenForWrite)
++	if (dev->checkpointOpenForWrite)
+ 		return -1;
+ 
+-	while(i < nBytes && ok) {
++	while (i < nBytes && ok) {
+ 
+ 
+-		if(dev->checkpointByteOffset < 0 ||
+-		   dev->checkpointByteOffset >= dev->nDataBytesPerChunk) {
++		if (dev->checkpointByteOffset < 0 ||
++			dev->checkpointByteOffset >= dev->nDataBytesPerChunk) {
+ 
+-		   	if(dev->checkpointCurrentBlock < 0){
++			if (dev->checkpointCurrentBlock < 0) {
+ 				yaffs_CheckpointFindNextCheckpointBlock(dev);
+ 				dev->checkpointCurrentChunk = 0;
+ 			}
+ 
+-			if(dev->checkpointCurrentBlock < 0)
++			if (dev->checkpointCurrentBlock < 0)
+ 				ok = 0;
+ 			else {
+-
+-				chunk = dev->checkpointCurrentBlock * dev->nChunksPerBlock +
+-				          dev->checkpointCurrentChunk;
++				chunk = dev->checkpointCurrentBlock *
++					dev->nChunksPerBlock +
++					dev->checkpointCurrentChunk;
+ 
+ 				realignedChunk = chunk - dev->chunkOffset;
+ 
+-	   			/* read in the next chunk */
+-	   			/* printf("read checkpoint page %d\n",dev->checkpointPage); */
+-				dev->readChunkWithTagsFromNAND(dev, realignedChunk,
+-							       dev->checkpointBuffer,
+-							      &tags);
+-
+-				if(tags.chunkId != (dev->checkpointPageSequence + 1) ||
+-				   tags.sequenceNumber != YAFFS_SEQUENCE_CHECKPOINT_DATA)
+-				   ok = 0;
++				/* read in the next chunk */
++				/* printf("read checkpoint page %d\n",dev->checkpointPage); */
++				dev->readChunkWithTagsFromNAND(dev,
++						realignedChunk,
++						dev->checkpointBuffer,
++						&tags);
++
++				if (tags.chunkId != (dev->checkpointPageSequence + 1) ||
++					tags.eccResult > YAFFS_ECC_RESULT_FIXED ||
++					tags.sequenceNumber != YAFFS_SEQUENCE_CHECKPOINT_DATA)
++					ok = 0;
+ 
+ 				dev->checkpointByteOffset = 0;
+ 				dev->checkpointPageSequence++;
+ 				dev->checkpointCurrentChunk++;
+ 
+-				if(dev->checkpointCurrentChunk >= dev->nChunksPerBlock)
++				if (dev->checkpointCurrentChunk >= dev->nChunksPerBlock)
+ 					dev->checkpointCurrentBlock = -1;
+ 			}
+ 		}
+ 
+-		if(ok){
++		if (ok) {
+ 			*dataBytes = dev->checkpointBuffer[dev->checkpointByteOffset];
+ 			dev->checkpointSum += *dataBytes;
+ 			dev->checkpointXor ^= *dataBytes;
+@@ -353,17 +345,17 @@ int yaffs_CheckpointRead(yaffs_Device *d
+ int yaffs_CheckpointClose(yaffs_Device *dev)
+ {
+ 
+-	if(dev->checkpointOpenForWrite){
+-		if(dev->checkpointByteOffset != 0)
++	if (dev->checkpointOpenForWrite) {
++		if (dev->checkpointByteOffset != 0)
+ 			yaffs_CheckpointFlushBuffer(dev);
+ 	} else {
+ 		int i;
+-		for(i = 0; i < dev->blocksInCheckpoint && dev->checkpointBlockList[i] >= 0; i++){
+-			yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,dev->checkpointBlockList[i]);
+-			if(bi->blockState == YAFFS_BLOCK_STATE_EMPTY)
++		for (i = 0; i < dev->blocksInCheckpoint && dev->checkpointBlockList[i] >= 0; i++) {
++			yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, dev->checkpointBlockList[i]);
++			if (bi->blockState == YAFFS_BLOCK_STATE_EMPTY)
+ 				bi->blockState = YAFFS_BLOCK_STATE_CHECKPOINT;
+ 			else {
+-				// Todo this looks odd...
++				/* Todo this looks odd... */
+ 			}
+ 		}
+ 		YFREE(dev->checkpointBlockList);
+@@ -374,27 +366,25 @@ int yaffs_CheckpointClose(yaffs_Device *
+ 	dev->nErasedBlocks -= dev->blocksInCheckpoint;
+ 
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("checkpoint byte count %d" TENDSTR),
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("checkpoint byte count %d" TENDSTR),
+ 			dev->checkpointByteCount));
+ 
+-	if(dev->checkpointBuffer){
++	if (dev->checkpointBuffer) {
+ 		/* free the buffer */
+ 		YFREE(dev->checkpointBuffer);
+ 		dev->checkpointBuffer = NULL;
+ 		return 1;
+-	}
+-	else
++	} else
+ 		return 0;
+-
+ }
+ 
+ int yaffs_CheckpointInvalidateStream(yaffs_Device *dev)
+ {
+ 	/* Erase the first checksum block */
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("checkpoint invalidate"TENDSTR)));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("checkpoint invalidate"TENDSTR)));
+ 
+-	if(!yaffs_CheckpointSpaceOk(dev))
++	if (!yaffs_CheckpointSpaceOk(dev))
+ 		return 0;
+ 
+ 	return yaffs_CheckpointErase(dev);
+--- a/fs/yaffs2/yaffs_checkptrw.h
++++ b/fs/yaffs2/yaffs_checkptrw.h
+@@ -20,9 +20,9 @@
+ 
+ int yaffs_CheckpointOpen(yaffs_Device *dev, int forWriting);
+ 
+-int yaffs_CheckpointWrite(yaffs_Device *dev,const void *data, int nBytes);
++int yaffs_CheckpointWrite(yaffs_Device *dev, const void *data, int nBytes);
+ 
+-int yaffs_CheckpointRead(yaffs_Device *dev,void *data, int nBytes);
++int yaffs_CheckpointRead(yaffs_Device *dev, void *data, int nBytes);
+ 
+ int yaffs_GetCheckpointSum(yaffs_Device *dev, __u32 *sum);
+ 
+--- a/fs/yaffs2/yaffs_ecc.c
++++ b/fs/yaffs2/yaffs_ecc.c
+@@ -29,7 +29,7 @@
+  */
+ 
+ const char *yaffs_ecc_c_version =
+-    "$Id: yaffs_ecc.c,v 1.9 2007-02-14 01:09:06 wookey Exp $";
++	"$Id: yaffs_ecc.c,v 1.11 2009-03-06 17:20:50 wookey Exp $";
+ 
+ #include "yportenv.h"
+ 
+@@ -109,12 +109,10 @@ void yaffs_ECCCalculate(const unsigned c
+ 		b = column_parity_table[*data++];
+ 		col_parity ^= b;
+ 
+-		if (b & 0x01)	// odd number of bits in the byte
+-		{
++		if (b & 0x01) {		/* odd number of bits in the byte */
+ 			line_parity ^= i;
+ 			line_parity_prime ^= ~i;
+ 		}
+-
+ 	}
+ 
+ 	ecc[2] = (~col_parity) | 0x03;
+@@ -158,7 +156,7 @@ void yaffs_ECCCalculate(const unsigned c
+ 	ecc[0] = ~t;
+ 
+ #ifdef CONFIG_YAFFS_ECC_WRONG_ORDER
+-	// Swap the bytes into the wrong order
++	/* Swap the bytes into the wrong order */
+ 	t = ecc[0];
+ 	ecc[0] = ecc[1];
+ 	ecc[1] = t;
+@@ -189,7 +187,7 @@ int yaffs_ECCCorrect(unsigned char *data
+ 		unsigned bit;
+ 
+ #ifdef CONFIG_YAFFS_ECC_WRONG_ORDER
+-		// swap the bytes to correct for the wrong order
++		/* swap the bytes to correct for the wrong order */
+ 		unsigned char t;
+ 
+ 		t = d0;
+@@ -251,7 +249,7 @@ int yaffs_ECCCorrect(unsigned char *data
+  * ECCxxxOther does ECC calcs on arbitrary n bytes of data
+  */
+ void yaffs_ECCCalculateOther(const unsigned char *data, unsigned nBytes,
+-			     yaffs_ECCOther * eccOther)
++				yaffs_ECCOther *eccOther)
+ {
+ 	unsigned int i;
+ 
+@@ -278,8 +276,8 @@ void yaffs_ECCCalculateOther(const unsig
+ }
+ 
+ int yaffs_ECCCorrectOther(unsigned char *data, unsigned nBytes,
+-			  yaffs_ECCOther * read_ecc,
+-			  const yaffs_ECCOther * test_ecc)
++			yaffs_ECCOther *read_ecc,
++			const yaffs_ECCOther *test_ecc)
+ {
+ 	unsigned char cDelta;	/* column parity delta */
+ 	unsigned lDelta;	/* line parity delta */
+@@ -294,8 +292,7 @@ int yaffs_ECCCorrectOther(unsigned char
+ 		return 0; /* no error */
+ 
+ 	if (lDelta == ~lDeltaPrime &&
+-	    (((cDelta ^ (cDelta >> 1)) & 0x15) == 0x15))
+-	{
++	    (((cDelta ^ (cDelta >> 1)) & 0x15) == 0x15)) {
+ 		/* Single bit (recoverable) error in data */
+ 
+ 		bit = 0;
+@@ -307,7 +304,7 @@ int yaffs_ECCCorrectOther(unsigned char
+ 		if (cDelta & 0x02)
+ 			bit |= 0x01;
+ 
+-		if(lDelta >= nBytes)
++		if (lDelta >= nBytes)
+ 			return -1;
+ 
+ 		data[lDelta] ^= (1 << bit);
+@@ -316,7 +313,7 @@ int yaffs_ECCCorrectOther(unsigned char
+ 	}
+ 
+ 	if ((yaffs_CountBits32(lDelta) + yaffs_CountBits32(lDeltaPrime) +
+-	     yaffs_CountBits(cDelta)) == 1) {
++			yaffs_CountBits(cDelta)) == 1) {
+ 		/* Reccoverable error in ecc */
+ 
+ 		*read_ecc = *test_ecc;
+@@ -326,6 +323,4 @@ int yaffs_ECCCorrectOther(unsigned char
+ 	/* Unrecoverable error */
+ 
+ 	return -1;
+-
+ }
+-
+--- a/fs/yaffs2/yaffs_ecc.h
++++ b/fs/yaffs2/yaffs_ecc.h
+@@ -13,15 +13,15 @@
+  * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
+  */
+ 
+- /*
+-  * This code implements the ECC algorithm used in SmartMedia.
+-  *
+-  * The ECC comprises 22 bits of parity information and is stuffed into 3 bytes.
+-  * The two unused bit are set to 1.
+-  * The ECC can correct single bit errors in a 256-byte page of data. Thus, two such ECC
+-  * blocks are used on a 512-byte NAND page.
+-  *
+-  */
++/*
++ * This code implements the ECC algorithm used in SmartMedia.
++ *
++ * The ECC comprises 22 bits of parity information and is stuffed into 3 bytes.
++ * The two unused bit are set to 1.
++ * The ECC can correct single bit errors in a 256-byte page of data. Thus, two such ECC
++ * blocks are used on a 512-byte NAND page.
++ *
++ */
+ 
+ #ifndef __YAFFS_ECC_H__
+ #define __YAFFS_ECC_H__
+@@ -34,11 +34,11 @@ typedef struct {
+ 
+ void yaffs_ECCCalculate(const unsigned char *data, unsigned char *ecc);
+ int yaffs_ECCCorrect(unsigned char *data, unsigned char *read_ecc,
+-		     const unsigned char *test_ecc);
++		const unsigned char *test_ecc);
+ 
+ void yaffs_ECCCalculateOther(const unsigned char *data, unsigned nBytes,
+-			     yaffs_ECCOther * ecc);
++			yaffs_ECCOther *ecc);
+ int yaffs_ECCCorrectOther(unsigned char *data, unsigned nBytes,
+-			  yaffs_ECCOther * read_ecc,
+-			  const yaffs_ECCOther * test_ecc);
++			yaffs_ECCOther *read_ecc,
++			const yaffs_ECCOther *test_ecc);
+ #endif
+--- a/fs/yaffs2/yaffs_fs.c
++++ b/fs/yaffs2/yaffs_fs.c
+@@ -1,7 +1,7 @@
+ /*
+  * YAFFS: Yet Another Flash File System. A NAND-flash specific file system.
+  *
+- * Copyright (C) 2002-2007 Aleph One Ltd.
++ * Copyright (C) 2002-2009 Aleph One Ltd.
+  *   for Toby Churchill Ltd and Brightstar Engineering
+  *
+  * Created by Charles Manning <charles@aleph1.co.uk>
+@@ -32,18 +32,17 @@
+  */
+ 
+ const char *yaffs_fs_c_version =
+-    "$Id: yaffs_fs.c,v 1.63 2007-09-19 20:35:40 imcd Exp $";
++    "$Id: yaffs_fs.c,v 1.79 2009-03-17 01:12:00 wookey Exp $";
+ extern const char *yaffs_guts_c_version;
+ 
+ #include <linux/version.h>
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19))
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 19))
+ #include <linux/config.h>
+ #endif
+ #include <linux/kernel.h>
+ #include <linux/module.h>
+ #include <linux/slab.h>
+ #include <linux/init.h>
+-#include <linux/list.h>
+ #include <linux/fs.h>
+ #include <linux/proc_fs.h>
+ #include <linux/smp_lock.h>
+@@ -53,10 +52,12 @@ extern const char *yaffs_guts_c_version;
+ #include <linux/string.h>
+ #include <linux/ctype.h>
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#include "asm/div64.h"
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 
+ #include <linux/statfs.h>	/* Added NCB 15-8-2003 */
+-#include <asm/statfs.h>
++#include <linux/statfs.h>
+ #define UnlockPage(p) unlock_page(p)
+ #define Page_Uptodate(page)	test_bit(PG_uptodate, &(page)->flags)
+ 
+@@ -69,22 +70,45 @@ extern const char *yaffs_guts_c_version;
+ #define	BDEVNAME_SIZE		0
+ #define	yaffs_devname(sb, buf)	kdevname(sb->s_dev)
+ 
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 5, 0))
+ /* added NCB 26/5/2006 for 2.4.25-vrs2-tcl1 kernel */
+ #define __user
+ #endif
+ 
+ #endif
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 26))
++#define YPROC_ROOT  (&proc_root)
++#else
++#define YPROC_ROOT  NULL
++#endif
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ #define WRITE_SIZE_STR "writesize"
+-#define WRITE_SIZE(mtd) (mtd)->writesize
++#define WRITE_SIZE(mtd) ((mtd)->writesize)
+ #else
+ #define WRITE_SIZE_STR "oobblock"
+-#define WRITE_SIZE(mtd) (mtd)->oobblock
++#define WRITE_SIZE(mtd) ((mtd)->oobblock)
+ #endif
+ 
+-#include <asm/uaccess.h>
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 27))
++#define YAFFS_USE_WRITE_BEGIN_END 1
++#else
++#define YAFFS_USE_WRITE_BEGIN_END 0
++#endif
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 28))
++static uint32_t YCALCBLOCKS(uint64_t partition_size, uint32_t block_size)
++{
++	uint64_t result = partition_size;
++	do_div(result, block_size);
++	return (uint32_t)result;
++}
++#else
++#define YCALCBLOCKS(s, b) ((s)/(b))
++#endif
++
++#include <linux/uaccess.h>
+ 
+ #include "yportenv.h"
+ #include "yaffs_guts.h"
+@@ -96,28 +120,44 @@ extern const char *yaffs_guts_c_version;
+ 
+ unsigned int yaffs_traceMask = YAFFS_TRACE_BAD_BLOCKS;
+ unsigned int yaffs_wr_attempts = YAFFS_WR_ATTEMPTS;
++unsigned int yaffs_auto_checkpoint = 1;
+ 
+ /* Module Parameters */
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+-module_param(yaffs_traceMask,uint,0644);
+-module_param(yaffs_wr_attempts,uint,0644);
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
++module_param(yaffs_traceMask, uint, 0644);
++module_param(yaffs_wr_attempts, uint, 0644);
++module_param(yaffs_auto_checkpoint, uint, 0644);
++#else
++MODULE_PARM(yaffs_traceMask, "i");
++MODULE_PARM(yaffs_wr_attempts, "i");
++MODULE_PARM(yaffs_auto_checkpoint, "i");
++#endif
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 25))
++/* use iget and read_inode */
++#define Y_IGET(sb, inum) iget((sb), (inum))
++static void yaffs_read_inode(struct inode *inode);
++
+ #else
+-MODULE_PARM(yaffs_traceMask,"i");
+-MODULE_PARM(yaffs_wr_attempts,"i");
++/* Call local equivalent */
++#define YAFFS_USE_OWN_IGET
++#define Y_IGET(sb, inum) yaffs_iget((sb), (inum))
++
++static struct inode *yaffs_iget(struct super_block *sb, unsigned long ino);
+ #endif
+ 
+ /*#define T(x) printk x */
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18))
+-#define yaffs_InodeToObjectLV(iptr) (iptr)->i_private
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 18))
++#define yaffs_InodeToObjectLV(iptr) ((iptr)->i_private)
+ #else
+-#define yaffs_InodeToObjectLV(iptr) (iptr)->u.generic_ip
++#define yaffs_InodeToObjectLV(iptr) ((iptr)->u.generic_ip)
+ #endif
+ 
+ #define yaffs_InodeToObject(iptr) ((yaffs_Object *)(yaffs_InodeToObjectLV(iptr)))
+ #define yaffs_DentryToObject(dptr) yaffs_InodeToObject((dptr)->d_inode)
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ #define yaffs_SuperToDevice(sb)	((yaffs_Device *)sb->s_fs_info)
+ #else
+ #define yaffs_SuperToDevice(sb)	((yaffs_Device *)sb->u.generic_sbp)
+@@ -126,47 +166,49 @@ MODULE_PARM(yaffs_wr_attempts,"i");
+ static void yaffs_put_super(struct super_block *sb);
+ 
+ static ssize_t yaffs_file_write(struct file *f, const char *buf, size_t n,
+-				loff_t * pos);
++				loff_t *pos);
++static ssize_t yaffs_hold_space(struct file *f);
++static void yaffs_release_space(struct file *f);
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_file_flush(struct file *file, fl_owner_t id);
+ #else
+ static int yaffs_file_flush(struct file *file);
+ #endif
+ 
+ static int yaffs_sync_object(struct file *file, struct dentry *dentry,
+-			     int datasync);
++				int datasync);
+ 
+ static int yaffs_readdir(struct file *f, void *dirent, filldir_t filldir);
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode,
+ 			struct nameidata *n);
+ static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry,
+-				   struct nameidata *n);
++					struct nameidata *n);
+ #else
+ static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode);
+ static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry);
+ #endif
+ static int yaffs_link(struct dentry *old_dentry, struct inode *dir,
+-		      struct dentry *dentry);
++			struct dentry *dentry);
+ static int yaffs_unlink(struct inode *dir, struct dentry *dentry);
+ static int yaffs_symlink(struct inode *dir, struct dentry *dentry,
+-			 const char *symname);
++			const char *symname);
+ static int yaffs_mkdir(struct inode *dir, struct dentry *dentry, int mode);
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode,
+-		       dev_t dev);
++			dev_t dev);
+ #else
+ static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode,
+-		       int dev);
++			int dev);
+ #endif
+ static int yaffs_rename(struct inode *old_dir, struct dentry *old_dentry,
+ 			struct inode *new_dir, struct dentry *new_dentry);
+ static int yaffs_setattr(struct dentry *dentry, struct iattr *attr);
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_sync_fs(struct super_block *sb, int wait);
+ static void yaffs_write_super(struct super_block *sb);
+ #else
+@@ -174,33 +216,47 @@ static int yaffs_sync_fs(struct super_bl
+ static int yaffs_write_super(struct super_block *sb);
+ #endif
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_statfs(struct dentry *dentry, struct kstatfs *buf);
+-#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_statfs(struct super_block *sb, struct kstatfs *buf);
+ #else
+ static int yaffs_statfs(struct super_block *sb, struct statfs *buf);
+ #endif
+-static void yaffs_read_inode(struct inode *inode);
+ 
++#ifdef YAFFS_HAS_PUT_INODE
+ static void yaffs_put_inode(struct inode *inode);
++#endif
++
+ static void yaffs_delete_inode(struct inode *);
+ static void yaffs_clear_inode(struct inode *);
+ 
+ static int yaffs_readpage(struct file *file, struct page *page);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_writepage(struct page *page, struct writeback_control *wbc);
+ #else
+ static int yaffs_writepage(struct page *page);
+ #endif
++
++
++#if (YAFFS_USE_WRITE_BEGIN_END != 0)
++static int yaffs_write_begin(struct file *filp, struct address_space *mapping,
++				loff_t pos, unsigned len, unsigned flags,
++				struct page **pagep, void **fsdata);
++static int yaffs_write_end(struct file *filp, struct address_space *mapping,
++				loff_t pos, unsigned len, unsigned copied,
++				struct page *pg, void *fsdadata);
++#else
+ static int yaffs_prepare_write(struct file *f, struct page *pg,
+-			       unsigned offset, unsigned to);
++				unsigned offset, unsigned to);
+ static int yaffs_commit_write(struct file *f, struct page *pg, unsigned offset,
+-			      unsigned to);
++				unsigned to);
+ 
+-static int yaffs_readlink(struct dentry *dentry, char __user * buffer,
+-			  int buflen);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
++#endif
++
++static int yaffs_readlink(struct dentry *dentry, char __user *buffer,
++				int buflen);
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 13))
+ static void *yaffs_follow_link(struct dentry *dentry, struct nameidata *nd);
+ #else
+ static int yaffs_follow_link(struct dentry *dentry, struct nameidata *nd);
+@@ -209,12 +265,17 @@ static int yaffs_follow_link(struct dent
+ static struct address_space_operations yaffs_file_address_operations = {
+ 	.readpage = yaffs_readpage,
+ 	.writepage = yaffs_writepage,
++#if (YAFFS_USE_WRITE_BEGIN_END > 0)
++	.write_begin = yaffs_write_begin,
++	.write_end = yaffs_write_end,
++#else
+ 	.prepare_write = yaffs_prepare_write,
+ 	.commit_write = yaffs_commit_write,
++#endif
+ };
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,22))
+-static struct file_operations yaffs_file_operations = {
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 22))
++static const struct file_operations yaffs_file_operations = {
+ 	.read = do_sync_read,
+ 	.write = do_sync_write,
+ 	.aio_read = generic_file_aio_read,
+@@ -224,11 +285,12 @@ static struct file_operations yaffs_file
+ 	.fsync = yaffs_sync_object,
+ 	.splice_read = generic_file_splice_read,
+ 	.splice_write = generic_file_splice_write,
++	.llseek = generic_file_llseek,
+ };
+ 
+-#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18))
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 18))
+ 
+-static struct file_operations yaffs_file_operations = {
++static const struct file_operations yaffs_file_operations = {
+ 	.read = do_sync_read,
+ 	.write = do_sync_write,
+ 	.aio_read = generic_file_aio_read,
+@@ -241,29 +303,29 @@ static struct file_operations yaffs_file
+ 
+ #else
+ 
+-static struct file_operations yaffs_file_operations = {
++static const struct file_operations yaffs_file_operations = {
+ 	.read = generic_file_read,
+ 	.write = generic_file_write,
+ 	.mmap = generic_file_mmap,
+ 	.flush = yaffs_file_flush,
+ 	.fsync = yaffs_sync_object,
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 	.sendfile = generic_file_sendfile,
+ #endif
+ };
+ #endif
+ 
+-static struct inode_operations yaffs_file_inode_operations = {
++static const struct inode_operations yaffs_file_inode_operations = {
+ 	.setattr = yaffs_setattr,
+ };
+ 
+-static struct inode_operations yaffs_symlink_inode_operations = {
++static const struct inode_operations yaffs_symlink_inode_operations = {
+ 	.readlink = yaffs_readlink,
+ 	.follow_link = yaffs_follow_link,
+ 	.setattr = yaffs_setattr,
+ };
+ 
+-static struct inode_operations yaffs_dir_inode_operations = {
++static const struct inode_operations yaffs_dir_inode_operations = {
+ 	.create = yaffs_create,
+ 	.lookup = yaffs_lookup,
+ 	.link = yaffs_link,
+@@ -276,16 +338,21 @@ static struct inode_operations yaffs_dir
+ 	.setattr = yaffs_setattr,
+ };
+ 
+-static struct file_operations yaffs_dir_operations = {
++static const struct file_operations yaffs_dir_operations = {
+ 	.read = generic_read_dir,
+ 	.readdir = yaffs_readdir,
+ 	.fsync = yaffs_sync_object,
+ };
+ 
+-static struct super_operations yaffs_super_ops = {
++static const struct super_operations yaffs_super_ops = {
+ 	.statfs = yaffs_statfs,
++
++#ifndef YAFFS_USE_OWN_IGET
+ 	.read_inode = yaffs_read_inode,
++#endif
++#ifdef YAFFS_HAS_PUT_INODE
+ 	.put_inode = yaffs_put_inode,
++#endif
+ 	.put_super = yaffs_put_super,
+ 	.delete_inode = yaffs_delete_inode,
+ 	.clear_inode = yaffs_clear_inode,
+@@ -293,22 +360,21 @@ static struct super_operations yaffs_sup
+ 	.write_super = yaffs_write_super,
+ };
+ 
+-static void yaffs_GrossLock(yaffs_Device * dev)
++static void yaffs_GrossLock(yaffs_Device *dev)
+ {
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs locking\n"));
+-
++	T(YAFFS_TRACE_OS, ("yaffs locking %p\n", current));
+ 	down(&dev->grossLock);
++	T(YAFFS_TRACE_OS, ("yaffs locked %p\n", current));
+ }
+ 
+-static void yaffs_GrossUnlock(yaffs_Device * dev)
++static void yaffs_GrossUnlock(yaffs_Device *dev)
+ {
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs unlocking\n"));
++	T(YAFFS_TRACE_OS, ("yaffs unlocking %p\n", current));
+ 	up(&dev->grossLock);
+-
+ }
+ 
+-static int yaffs_readlink(struct dentry *dentry, char __user * buffer,
+-			  int buflen)
++static int yaffs_readlink(struct dentry *dentry, char __user *buffer,
++			int buflen)
+ {
+ 	unsigned char *alias;
+ 	int ret;
+@@ -329,7 +395,7 @@ static int yaffs_readlink(struct dentry
+ 	return ret;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 13))
+ static void *yaffs_follow_link(struct dentry *dentry, struct nameidata *nd)
+ #else
+ static int yaffs_follow_link(struct dentry *dentry, struct nameidata *nd)
+@@ -345,32 +411,31 @@ static int yaffs_follow_link(struct dent
+ 
+ 	yaffs_GrossUnlock(dev);
+ 
+-	if (!alias)
+-        {
++	if (!alias) {
+ 		ret = -ENOMEM;
+ 		goto out;
+-        }
++	}
+ 
+ 	ret = vfs_follow_link(nd, alias);
+ 	kfree(alias);
+ out:
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
+-	return ERR_PTR (ret);
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 13))
++	return ERR_PTR(ret);
+ #else
+ 	return ret;
+ #endif
+ }
+ 
+ struct inode *yaffs_get_inode(struct super_block *sb, int mode, int dev,
+-			      yaffs_Object * obj);
++				yaffs_Object *obj);
+ 
+ /*
+  * Lookup is used to find objects in the fs
+  */
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 
+ static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry,
+-				   struct nameidata *n)
++				struct nameidata *n)
+ #else
+ static struct dentry *yaffs_lookup(struct inode *dir, struct dentry *dentry)
+ #endif
+@@ -383,12 +448,11 @@ static struct dentry *yaffs_lookup(struc
+ 	yaffs_GrossLock(dev);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_lookup for %d:%s\n",
+-	   yaffs_InodeToObject(dir)->objectId, dentry->d_name.name));
++		("yaffs_lookup for %d:%s\n",
++		yaffs_InodeToObject(dir)->objectId, dentry->d_name.name));
+ 
+-	obj =
+-	    yaffs_FindObjectByName(yaffs_InodeToObject(dir),
+-				   dentry->d_name.name);
++	obj = yaffs_FindObjectByName(yaffs_InodeToObject(dir),
++					dentry->d_name.name);
+ 
+ 	obj = yaffs_GetEquivalentObject(obj);	/* in case it was a hardlink */
+ 
+@@ -397,13 +461,13 @@ static struct dentry *yaffs_lookup(struc
+ 
+ 	if (obj) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_lookup found %d\n", obj->objectId));
++			("yaffs_lookup found %d\n", obj->objectId));
+ 
+ 		inode = yaffs_get_inode(dir->i_sb, obj->yst_mode, 0, obj);
+ 
+ 		if (inode) {
+ 			T(YAFFS_TRACE_OS,
+-			  (KERN_DEBUG "yaffs_loookup dentry \n"));
++				("yaffs_loookup dentry \n"));
+ /* #if 0 asserted by NCB for 2.5/6 compatability - falls through to
+  * d_add even if NULL inode */
+ #if 0
+@@ -416,7 +480,7 @@ static struct dentry *yaffs_lookup(struc
+ 		}
+ 
+ 	} else {
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_lookup not found\n"));
++		T(YAFFS_TRACE_OS, ("yaffs_lookup not found\n"));
+ 
+ 	}
+ 
+@@ -425,20 +489,22 @@ static struct dentry *yaffs_lookup(struc
+ 	d_add(dentry, inode);
+ 
+ 	return NULL;
+-	/*      return (ERR_PTR(-EIO)); */
+-
+ }
+ 
++
++#ifdef YAFFS_HAS_PUT_INODE
++
+ /* For now put inode is just for debugging
+  * Put inode is called when the inode **structure** is put.
+  */
+ static void yaffs_put_inode(struct inode *inode)
+ {
+ 	T(YAFFS_TRACE_OS,
+-	  ("yaffs_put_inode: ino %d, count %d\n", (int)inode->i_ino,
+-	   atomic_read(&inode->i_count)));
++		("yaffs_put_inode: ino %d, count %d\n", (int)inode->i_ino,
++		atomic_read(&inode->i_count)));
+ 
+ }
++#endif
+ 
+ /* clear is called to tell the fs to release any per-inode data it holds */
+ static void yaffs_clear_inode(struct inode *inode)
+@@ -449,9 +515,9 @@ static void yaffs_clear_inode(struct ino
+ 	obj = yaffs_InodeToObject(inode);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  ("yaffs_clear_inode: ino %d, count %d %s\n", (int)inode->i_ino,
+-	   atomic_read(&inode->i_count),
+-	   obj ? "object exists" : "null object"));
++		("yaffs_clear_inode: ino %d, count %d %s\n", (int)inode->i_ino,
++		atomic_read(&inode->i_count),
++		obj ? "object exists" : "null object"));
+ 
+ 	if (obj) {
+ 		dev = obj->myDev;
+@@ -486,23 +552,23 @@ static void yaffs_delete_inode(struct in
+ 	yaffs_Device *dev;
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  ("yaffs_delete_inode: ino %d, count %d %s\n", (int)inode->i_ino,
+-	   atomic_read(&inode->i_count),
+-	   obj ? "object exists" : "null object"));
++		("yaffs_delete_inode: ino %d, count %d %s\n", (int)inode->i_ino,
++		atomic_read(&inode->i_count),
++		obj ? "object exists" : "null object"));
+ 
+ 	if (obj) {
+ 		dev = obj->myDev;
+ 		yaffs_GrossLock(dev);
+-		yaffs_DeleteFile(obj);
++		yaffs_DeleteObject(obj);
+ 		yaffs_GrossUnlock(dev);
+ 	}
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
+-        truncate_inode_pages (&inode->i_data, 0);
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 13))
++	truncate_inode_pages(&inode->i_data, 0);
+ #endif
+ 	clear_inode(inode);
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_file_flush(struct file *file, fl_owner_t id)
+ #else
+ static int yaffs_file_flush(struct file *file)
+@@ -513,8 +579,8 @@ static int yaffs_file_flush(struct file
+ 	yaffs_Device *dev = obj->myDev;
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_file_flush object %d (%s)\n", obj->objectId,
+-	   obj->dirty ? "dirty" : "clean"));
++		("yaffs_file_flush object %d (%s)\n", obj->objectId,
++		obj->dirty ? "dirty" : "clean"));
+ 
+ 	yaffs_GrossLock(dev);
+ 
+@@ -535,15 +601,15 @@ static int yaffs_readpage_nolock(struct
+ 
+ 	yaffs_Device *dev;
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_readpage at %08x, size %08x\n",
+-			   (unsigned)(pg->index << PAGE_CACHE_SHIFT),
+-			   (unsigned)PAGE_CACHE_SIZE));
++	T(YAFFS_TRACE_OS, ("yaffs_readpage at %08x, size %08x\n",
++			(unsigned)(pg->index << PAGE_CACHE_SHIFT),
++			(unsigned)PAGE_CACHE_SIZE));
+ 
+ 	obj = yaffs_DentryToObject(f->f_dentry);
+ 
+ 	dev = obj->myDev;
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 	BUG_ON(!PageLocked(pg));
+ #else
+ 	if (!PageLocked(pg))
+@@ -555,9 +621,9 @@ static int yaffs_readpage_nolock(struct
+ 
+ 	yaffs_GrossLock(dev);
+ 
+-	ret =
+-	    yaffs_ReadDataFromFile(obj, pg_buf, pg->index << PAGE_CACHE_SHIFT,
+-				   PAGE_CACHE_SIZE);
++	ret = yaffs_ReadDataFromFile(obj, pg_buf,
++				pg->index << PAGE_CACHE_SHIFT,
++				PAGE_CACHE_SIZE);
+ 
+ 	yaffs_GrossUnlock(dev);
+ 
+@@ -575,7 +641,7 @@ static int yaffs_readpage_nolock(struct
+ 	flush_dcache_page(pg);
+ 	kunmap(pg);
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_readpage done\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_readpage done\n"));
+ 	return ret;
+ }
+ 
+@@ -593,7 +659,7 @@ static int yaffs_readpage(struct file *f
+ 
+ /* writepage inspired by/stolen from smbfs */
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_writepage(struct page *page, struct writeback_control *wbc)
+ #else
+ static int yaffs_writepage(struct page *page)
+@@ -616,12 +682,11 @@ static int yaffs_writepage(struct page *
+ 
+ 	if (offset > inode->i_size) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG
+-		   "yaffs_writepage at %08x, inode size = %08x!!!\n",
+-		   (unsigned)(page->index << PAGE_CACHE_SHIFT),
+-		   (unsigned)inode->i_size));
++			("yaffs_writepage at %08x, inode size = %08x!!!\n",
++			(unsigned)(page->index << PAGE_CACHE_SHIFT),
++			(unsigned)inode->i_size));
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "                -> don't care!!\n"));
++			("                -> don't care!!\n"));
+ 		unlock_page(page);
+ 		return 0;
+ 	}
+@@ -629,11 +694,10 @@ static int yaffs_writepage(struct page *
+ 	end_index = inode->i_size >> PAGE_CACHE_SHIFT;
+ 
+ 	/* easy case */
+-	if (page->index < end_index) {
++	if (page->index < end_index)
+ 		nBytes = PAGE_CACHE_SIZE;
+-	} else {
++	else
+ 		nBytes = inode->i_size & (PAGE_CACHE_SIZE - 1);
+-	}
+ 
+ 	get_page(page);
+ 
+@@ -643,19 +707,18 @@ static int yaffs_writepage(struct page *
+ 	yaffs_GrossLock(obj->myDev);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_writepage at %08x, size %08x\n",
+-	   (unsigned)(page->index << PAGE_CACHE_SHIFT), nBytes));
++		("yaffs_writepage at %08x, size %08x\n",
++		(unsigned)(page->index << PAGE_CACHE_SHIFT), nBytes));
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "writepag0: obj = %05x, ino = %05x\n",
+-	   (int)obj->variant.fileVariant.fileSize, (int)inode->i_size));
++		("writepag0: obj = %05x, ino = %05x\n",
++		(int)obj->variant.fileVariant.fileSize, (int)inode->i_size));
+ 
+-	nWritten =
+-	    yaffs_WriteDataToFile(obj, buffer, page->index << PAGE_CACHE_SHIFT,
+-				  nBytes, 0);
++	nWritten = yaffs_WriteDataToFile(obj, buffer,
++			page->index << PAGE_CACHE_SHIFT, nBytes, 0);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "writepag1: obj = %05x, ino = %05x\n",
+-	   (int)obj->variant.fileVariant.fileSize, (int)inode->i_size));
++		("writepag1: obj = %05x, ino = %05x\n",
++		(int)obj->variant.fileVariant.fileSize, (int)inode->i_size));
+ 
+ 	yaffs_GrossUnlock(obj->myDev);
+ 
+@@ -667,100 +730,207 @@ static int yaffs_writepage(struct page *
+ 	return (nWritten == nBytes) ? 0 : -ENOSPC;
+ }
+ 
++
++#if (YAFFS_USE_WRITE_BEGIN_END > 0)
++static int yaffs_write_begin(struct file *filp, struct address_space *mapping,
++				loff_t pos, unsigned len, unsigned flags,
++				struct page **pagep, void **fsdata)
++{
++	struct page *pg = NULL;
++	pgoff_t index = pos >> PAGE_CACHE_SHIFT;
++	uint32_t offset = pos & (PAGE_CACHE_SIZE - 1);
++	uint32_t to = offset + len;
++
++	int ret = 0;
++	int space_held = 0;
++
++	T(YAFFS_TRACE_OS, ("start yaffs_write_begin\n"));
++	/* Get a page */
++#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 28)
++	pg = grab_cache_page_write_begin(mapping, index, flags);
++#else
++	pg = __grab_cache_page(mapping, index);
++#endif
++
++	*pagep = pg;
++	if (!pg) {
++		ret =  -ENOMEM;
++		goto out;
++	}
++	/* Get fs space */
++	space_held = yaffs_hold_space(filp);
++
++	if (!space_held) {
++		ret = -ENOSPC;
++		goto out;
++	}
++
++	/* Update page if required */
++
++	if (!Page_Uptodate(pg) && (offset || to < PAGE_CACHE_SIZE))
++		ret = yaffs_readpage_nolock(filp, pg);
++
++	if (ret)
++		goto out;
++
++	/* Happy path return */
++	T(YAFFS_TRACE_OS, ("end yaffs_write_begin - ok\n"));
++
++	return 0;
++
++out:
++	T(YAFFS_TRACE_OS, ("end yaffs_write_begin fail returning %d\n", ret));
++	if (space_held)
++		yaffs_release_space(filp);
++	if (pg) {
++		unlock_page(pg);
++		page_cache_release(pg);
++	}
++	return ret;
++}
++
++#else
++
+ static int yaffs_prepare_write(struct file *f, struct page *pg,
+-			       unsigned offset, unsigned to)
++				unsigned offset, unsigned to)
+ {
++	T(YAFFS_TRACE_OS, ("yaffs_prepair_write\n"));
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_prepair_write\n"));
+ 	if (!Page_Uptodate(pg) && (offset || to < PAGE_CACHE_SIZE))
+ 		return yaffs_readpage_nolock(f, pg);
+-
+ 	return 0;
++}
++#endif
++
++#if (YAFFS_USE_WRITE_BEGIN_END > 0)
++static int yaffs_write_end(struct file *filp, struct address_space *mapping,
++				loff_t pos, unsigned len, unsigned copied,
++				struct page *pg, void *fsdadata)
++{
++	int ret = 0;
++	void *addr, *kva;
++	uint32_t offset_into_page = pos & (PAGE_CACHE_SIZE - 1);
++
++	kva = kmap(pg);
++	addr = kva + offset_into_page;
++
++	T(YAFFS_TRACE_OS,
++		("yaffs_write_end addr %x pos %x nBytes %d\n",
++		(unsigned) addr,
++		(int)pos, copied));
++
++	ret = yaffs_file_write(filp, addr, copied, &pos);
++
++	if (ret != copied) {
++		T(YAFFS_TRACE_OS,
++			("yaffs_write_end not same size ret %d  copied %d\n",
++			ret, copied));
++		SetPageError(pg);
++		ClearPageUptodate(pg);
++	} else {
++		SetPageUptodate(pg);
++	}
++
++	kunmap(pg);
+ 
++	yaffs_release_space(filp);
++	unlock_page(pg);
++	page_cache_release(pg);
++	return ret;
+ }
++#else
+ 
+ static int yaffs_commit_write(struct file *f, struct page *pg, unsigned offset,
+-			      unsigned to)
++				unsigned to)
+ {
++	void *addr, *kva;
+ 
+-	void *addr = page_address(pg) + offset;
+ 	loff_t pos = (((loff_t) pg->index) << PAGE_CACHE_SHIFT) + offset;
+ 	int nBytes = to - offset;
+ 	int nWritten;
+ 
+ 	unsigned spos = pos;
+-	unsigned saddr = (unsigned)addr;
++	unsigned saddr;
++
++	kva = kmap(pg);
++	addr = kva + offset;
++
++	saddr = (unsigned) addr;
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_commit_write addr %x pos %x nBytes %d\n", saddr,
+-	   spos, nBytes));
++		("yaffs_commit_write addr %x pos %x nBytes %d\n",
++		saddr, spos, nBytes));
+ 
+ 	nWritten = yaffs_file_write(f, addr, nBytes, &pos);
+ 
+ 	if (nWritten != nBytes) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG
+-		   "yaffs_commit_write not same size nWritten %d  nBytes %d\n",
+-		   nWritten, nBytes));
++			("yaffs_commit_write not same size nWritten %d  nBytes %d\n",
++			nWritten, nBytes));
+ 		SetPageError(pg);
+ 		ClearPageUptodate(pg);
+ 	} else {
+ 		SetPageUptodate(pg);
+ 	}
+ 
++	kunmap(pg);
++
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_commit_write returning %d\n",
+-	   nWritten == nBytes ? 0 : nWritten));
++		("yaffs_commit_write returning %d\n",
++		nWritten == nBytes ? 0 : nWritten));
+ 
+ 	return nWritten == nBytes ? 0 : nWritten;
+-
+ }
++#endif
++
+ 
+-static void yaffs_FillInodeFromObject(struct inode *inode, yaffs_Object * obj)
++static void yaffs_FillInodeFromObject(struct inode *inode, yaffs_Object *obj)
+ {
+ 	if (inode && obj) {
+ 
+ 
+ 		/* Check mode against the variant type and attempt to repair if broken. */
+- 		__u32 mode = obj->yst_mode;
+- 		switch( obj->variantType ){
+- 		case YAFFS_OBJECT_TYPE_FILE :
+- 		        if( ! S_ISREG(mode) ){
+- 			        obj->yst_mode &= ~S_IFMT;
+- 			        obj->yst_mode |= S_IFREG;
+- 			}
+-
+- 			break;
+- 		case YAFFS_OBJECT_TYPE_SYMLINK :
+- 		        if( ! S_ISLNK(mode) ){
+- 			        obj->yst_mode &= ~S_IFMT;
+- 				obj->yst_mode |= S_IFLNK;
+- 			}
+-
+- 			break;
+- 		case YAFFS_OBJECT_TYPE_DIRECTORY :
+- 		        if( ! S_ISDIR(mode) ){
+- 			        obj->yst_mode &= ~S_IFMT;
+- 			        obj->yst_mode |= S_IFDIR;
+- 			}
+-
+- 			break;
+- 		case YAFFS_OBJECT_TYPE_UNKNOWN :
+- 		case YAFFS_OBJECT_TYPE_HARDLINK :
+- 		case YAFFS_OBJECT_TYPE_SPECIAL :
+- 		default:
+- 		        /* TODO? */
+- 		        break;
+- 		}
++		__u32 mode = obj->yst_mode;
++		switch (obj->variantType) {
++		case YAFFS_OBJECT_TYPE_FILE:
++			if (!S_ISREG(mode)) {
++				obj->yst_mode &= ~S_IFMT;
++				obj->yst_mode |= S_IFREG;
++			}
++
++			break;
++		case YAFFS_OBJECT_TYPE_SYMLINK:
++			if (!S_ISLNK(mode)) {
++				obj->yst_mode &= ~S_IFMT;
++				obj->yst_mode |= S_IFLNK;
++			}
++
++			break;
++		case YAFFS_OBJECT_TYPE_DIRECTORY:
++			if (!S_ISDIR(mode)) {
++				obj->yst_mode &= ~S_IFMT;
++				obj->yst_mode |= S_IFDIR;
++			}
++
++			break;
++		case YAFFS_OBJECT_TYPE_UNKNOWN:
++		case YAFFS_OBJECT_TYPE_HARDLINK:
++		case YAFFS_OBJECT_TYPE_SPECIAL:
++		default:
++			/* TODO? */
++			break;
++		}
++
++		inode->i_flags |= S_NOATIME;
+ 
+ 		inode->i_ino = obj->objectId;
+ 		inode->i_mode = obj->yst_mode;
+ 		inode->i_uid = obj->yst_uid;
+ 		inode->i_gid = obj->yst_gid;
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19))
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 19))
+ 		inode->i_blksize = inode->i_sb->s_blocksize;
+ #endif
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 
+ 		inode->i_rdev = old_decode_dev(obj->yst_rdev);
+ 		inode->i_atime.tv_sec = (time_t) (obj->yst_atime);
+@@ -781,26 +951,25 @@ static void yaffs_FillInodeFromObject(st
+ 		inode->i_nlink = yaffs_GetObjectLinkCount(obj);
+ 
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG
+-		   "yaffs_FillInode mode %x uid %d gid %d size %d count %d\n",
+-		   inode->i_mode, inode->i_uid, inode->i_gid,
+-		   (int)inode->i_size, atomic_read(&inode->i_count)));
++			("yaffs_FillInode mode %x uid %d gid %d size %d count %d\n",
++			inode->i_mode, inode->i_uid, inode->i_gid,
++			(int)inode->i_size, atomic_read(&inode->i_count)));
+ 
+ 		switch (obj->yst_mode & S_IFMT) {
+ 		default:	/* fifo, device or socket */
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 			init_special_inode(inode, obj->yst_mode,
+-					   old_decode_dev(obj->yst_rdev));
++					old_decode_dev(obj->yst_rdev));
+ #else
+ 			init_special_inode(inode, obj->yst_mode,
+-					   (dev_t) (obj->yst_rdev));
++					(dev_t) (obj->yst_rdev));
+ #endif
+ 			break;
+ 		case S_IFREG:	/* file */
+ 			inode->i_op = &yaffs_file_inode_operations;
+ 			inode->i_fop = &yaffs_file_operations;
+ 			inode->i_mapping->a_ops =
+-			    &yaffs_file_address_operations;
++				&yaffs_file_address_operations;
+ 			break;
+ 		case S_IFDIR:	/* directory */
+ 			inode->i_op = &yaffs_dir_inode_operations;
+@@ -817,34 +986,36 @@ static void yaffs_FillInodeFromObject(st
+ 
+ 	} else {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_FileInode invalid parameters\n"));
++			("yaffs_FileInode invalid parameters\n"));
+ 	}
+ 
+ }
+ 
+ struct inode *yaffs_get_inode(struct super_block *sb, int mode, int dev,
+-			      yaffs_Object * obj)
++				yaffs_Object *obj)
+ {
+ 	struct inode *inode;
+ 
+ 	if (!sb) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_get_inode for NULL super_block!!\n"));
++			("yaffs_get_inode for NULL super_block!!\n"));
+ 		return NULL;
+ 
+ 	}
+ 
+ 	if (!obj) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_get_inode for NULL object!!\n"));
++			("yaffs_get_inode for NULL object!!\n"));
+ 		return NULL;
+ 
+ 	}
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_get_inode for object %d\n", obj->objectId));
++		("yaffs_get_inode for object %d\n", obj->objectId));
+ 
+-	inode = iget(sb, obj->objectId);
++	inode = Y_IGET(sb, obj->objectId);
++	if (IS_ERR(inode))
++		return NULL;
+ 
+ 	/* NB Side effect: iget calls back to yaffs_read_inode(). */
+ 	/* iget also increments the inode's i_count */
+@@ -854,7 +1025,7 @@ struct inode *yaffs_get_inode(struct sup
+ }
+ 
+ static ssize_t yaffs_file_write(struct file *f, const char *buf, size_t n,
+-				loff_t * pos)
++				loff_t *pos)
+ {
+ 	yaffs_Object *obj;
+ 	int nWritten, ipos;
+@@ -869,28 +1040,26 @@ static ssize_t yaffs_file_write(struct f
+ 
+ 	inode = f->f_dentry->d_inode;
+ 
+-	if (!S_ISBLK(inode->i_mode) && f->f_flags & O_APPEND) {
++	if (!S_ISBLK(inode->i_mode) && f->f_flags & O_APPEND)
+ 		ipos = inode->i_size;
+-	} else {
++	else
+ 		ipos = *pos;
+-	}
+ 
+-	if (!obj) {
++	if (!obj)
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_file_write: hey obj is null!\n"));
+-	} else {
++			("yaffs_file_write: hey obj is null!\n"));
++	else
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG
+-		   "yaffs_file_write about to write writing %d bytes"
+-		   "to object %d at %d\n",
+-		   n, obj->objectId, ipos));
+-	}
++			("yaffs_file_write about to write writing %zu bytes"
++			"to object %d at %d\n",
++			n, obj->objectId, ipos));
+ 
+ 	nWritten = yaffs_WriteDataToFile(obj, buf, ipos, n, 0);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_file_write writing %d bytes, %d written at %d\n",
+-	   n, nWritten, ipos));
++		("yaffs_file_write writing %zu bytes, %d written at %d\n",
++		n, nWritten, ipos));
++
+ 	if (nWritten > 0) {
+ 		ipos += nWritten;
+ 		*pos = ipos;
+@@ -899,10 +1068,9 @@ static ssize_t yaffs_file_write(struct f
+ 			inode->i_blocks = (ipos + 511) >> 9;
+ 
+ 			T(YAFFS_TRACE_OS,
+-			  (KERN_DEBUG
+-			   "yaffs_file_write size updated to %d bytes, "
+-			   "%d blocks\n",
+-			   ipos, (int)(inode->i_blocks)));
++				("yaffs_file_write size updated to %d bytes, "
++				"%d blocks\n",
++				ipos, (int)(inode->i_blocks)));
+ 		}
+ 
+ 	}
+@@ -910,13 +1078,54 @@ static ssize_t yaffs_file_write(struct f
+ 	return nWritten == 0 ? -ENOSPC : nWritten;
+ }
+ 
++/* Space holding and freeing is done to ensure we have space available for write_begin/end */
++/* For now we just assume few parallel writes and check against a small number. */
++/* Todo: need to do this with a counter to handle parallel reads better */
++
++static ssize_t yaffs_hold_space(struct file *f)
++{
++	yaffs_Object *obj;
++	yaffs_Device *dev;
++
++	int nFreeChunks;
++
++
++	obj = yaffs_DentryToObject(f->f_dentry);
++
++	dev = obj->myDev;
++
++	yaffs_GrossLock(dev);
++
++	nFreeChunks = yaffs_GetNumberOfFreeChunks(dev);
++
++	yaffs_GrossUnlock(dev);
++
++	return (nFreeChunks > 20) ? 1 : 0;
++}
++
++static void yaffs_release_space(struct file *f)
++{
++	yaffs_Object *obj;
++	yaffs_Device *dev;
++
++
++	obj = yaffs_DentryToObject(f->f_dentry);
++
++	dev = obj->myDev;
++
++	yaffs_GrossLock(dev);
++
++
++	yaffs_GrossUnlock(dev);
++}
++
+ static int yaffs_readdir(struct file *f, void *dirent, filldir_t filldir)
+ {
+ 	yaffs_Object *obj;
+ 	yaffs_Device *dev;
+ 	struct inode *inode = f->f_dentry->d_inode;
+ 	unsigned long offset, curoffs;
+-	struct list_head *i;
++	struct ylist_head *i;
+ 	yaffs_Object *l;
+ 
+ 	char name[YAFFS_MAX_NAME_LENGTH + 1];
+@@ -932,24 +1141,20 @@ static int yaffs_readdir(struct file *f,
+ 
+ 	if (offset == 0) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_readdir: entry . ino %d \n",
+-		   (int)inode->i_ino));
+-		if (filldir(dirent, ".", 1, offset, inode->i_ino, DT_DIR)
+-		    < 0) {
++			("yaffs_readdir: entry . ino %d \n",
++			(int)inode->i_ino));
++		if (filldir(dirent, ".", 1, offset, inode->i_ino, DT_DIR) < 0)
+ 			goto out;
+-		}
+ 		offset++;
+ 		f->f_pos++;
+ 	}
+ 	if (offset == 1) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_readdir: entry .. ino %d \n",
+-		   (int)f->f_dentry->d_parent->d_inode->i_ino));
+-		if (filldir
+-		    (dirent, "..", 2, offset,
+-		     f->f_dentry->d_parent->d_inode->i_ino, DT_DIR) < 0) {
++			("yaffs_readdir: entry .. ino %d \n",
++			(int)f->f_dentry->d_parent->d_inode->i_ino));
++		if (filldir(dirent, "..", 2, offset,
++			f->f_dentry->d_parent->d_inode->i_ino, DT_DIR) < 0)
+ 			goto out;
+-		}
+ 		offset++;
+ 		f->f_pos++;
+ 	}
+@@ -965,35 +1170,32 @@ static int yaffs_readdir(struct file *f,
+ 		f->f_version = inode->i_version;
+ 	}
+ 
+-	list_for_each(i, &obj->variant.directoryVariant.children) {
++	ylist_for_each(i, &obj->variant.directoryVariant.children) {
+ 		curoffs++;
+ 		if (curoffs >= offset) {
+-			l = list_entry(i, yaffs_Object, siblings);
++			l = ylist_entry(i, yaffs_Object, siblings);
+ 
+ 			yaffs_GetObjectName(l, name,
+ 					    YAFFS_MAX_NAME_LENGTH + 1);
+ 			T(YAFFS_TRACE_OS,
+-			  (KERN_DEBUG "yaffs_readdir: %s inode %d\n", name,
++			  ("yaffs_readdir: %s inode %d\n", name,
+ 			   yaffs_GetObjectInode(l)));
+ 
+ 			if (filldir(dirent,
+-				    name,
+-				    strlen(name),
+-				    offset,
+-				    yaffs_GetObjectInode(l),
+-				    yaffs_GetObjectType(l))
+-			    < 0) {
++					name,
++					strlen(name),
++					offset,
++					yaffs_GetObjectInode(l),
++					yaffs_GetObjectType(l)) < 0)
+ 				goto up_and_out;
+-			}
+ 
+ 			offset++;
+ 			f->f_pos++;
+ 		}
+ 	}
+ 
+-      up_and_out:
+-      out:
+-
++up_and_out:
++out:
+ 	yaffs_GrossUnlock(dev);
+ 
+ 	return 0;
+@@ -1002,12 +1204,19 @@ static int yaffs_readdir(struct file *f,
+ /*
+  * File creation. Allocate an inode, and we're done..
+  */
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29)
++#define YCRED(x) x
++#else
++#define YCRED(x) (x->cred)
++#endif
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode,
+-		       dev_t rdev)
++			dev_t rdev)
+ #else
+ static int yaffs_mknod(struct inode *dir, struct dentry *dentry, int mode,
+-		       int rdev)
++			int rdev)
+ #endif
+ {
+ 	struct inode *inode;
+@@ -1018,25 +1227,25 @@ static int yaffs_mknod(struct inode *dir
+ 	yaffs_Object *parent = yaffs_InodeToObject(dir);
+ 
+ 	int error = -ENOSPC;
+-	uid_t uid = current->fsuid;
+-	gid_t gid = (dir->i_mode & S_ISGID) ? dir->i_gid : current->fsgid;
++	uid_t uid = YCRED(current)->fsuid;
++	gid_t gid = (dir->i_mode & S_ISGID) ? dir->i_gid : YCRED(current)->fsgid;
+ 
+-	if((dir->i_mode & S_ISGID) && S_ISDIR(mode))
++	if ((dir->i_mode & S_ISGID) && S_ISDIR(mode))
+ 		mode |= S_ISGID;
+ 
+ 	if (parent) {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_mknod: parent object %d type %d\n",
+-		   parent->objectId, parent->variantType));
++			("yaffs_mknod: parent object %d type %d\n",
++			parent->objectId, parent->variantType));
+ 	} else {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_mknod: could not get parent object\n"));
++			("yaffs_mknod: could not get parent object\n"));
+ 		return -EPERM;
+ 	}
+ 
+ 	T(YAFFS_TRACE_OS, ("yaffs_mknod: making oject for %s, "
+-			   "mode %x dev %x\n",
+-			   dentry->d_name.name, mode, rdev));
++			"mode %x dev %x\n",
++			dentry->d_name.name, mode, rdev));
+ 
+ 	dev = parent->myDev;
+ 
+@@ -1045,33 +1254,28 @@ static int yaffs_mknod(struct inode *dir
+ 	switch (mode & S_IFMT) {
+ 	default:
+ 		/* Special (socket, fifo, device...) */
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG
+-				   "yaffs_mknod: making special\n"));
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+-		obj =
+-		    yaffs_MknodSpecial(parent, dentry->d_name.name, mode, uid,
+-				       gid, old_encode_dev(rdev));
+-#else
+-		obj =
+-		    yaffs_MknodSpecial(parent, dentry->d_name.name, mode, uid,
+-				       gid, rdev);
++		T(YAFFS_TRACE_OS, ("yaffs_mknod: making special\n"));
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
++		obj = yaffs_MknodSpecial(parent, dentry->d_name.name, mode, uid,
++				gid, old_encode_dev(rdev));
++#else
++		obj = yaffs_MknodSpecial(parent, dentry->d_name.name, mode, uid,
++				gid, rdev);
+ #endif
+ 		break;
+ 	case S_IFREG:		/* file          */
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_mknod: making file\n"));
+-		obj =
+-		    yaffs_MknodFile(parent, dentry->d_name.name, mode, uid,
+-				    gid);
++		T(YAFFS_TRACE_OS, ("yaffs_mknod: making file\n"));
++		obj = yaffs_MknodFile(parent, dentry->d_name.name, mode, uid,
++				gid);
+ 		break;
+ 	case S_IFDIR:		/* directory */
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_mknod: making directory\n"));
+-		obj =
+-		    yaffs_MknodDirectory(parent, dentry->d_name.name, mode,
+-					 uid, gid);
++			("yaffs_mknod: making directory\n"));
++		obj = yaffs_MknodDirectory(parent, dentry->d_name.name, mode,
++					uid, gid);
+ 		break;
+ 	case S_IFLNK:		/* symlink */
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_mknod: making file\n"));
++		T(YAFFS_TRACE_OS, ("yaffs_mknod: making symlink\n"));
+ 		obj = NULL;	/* Do we ever get here? */
+ 		break;
+ 	}
+@@ -1083,12 +1287,12 @@ static int yaffs_mknod(struct inode *dir
+ 		inode = yaffs_get_inode(dir->i_sb, mode, rdev, obj);
+ 		d_instantiate(dentry, inode);
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_mknod created object %d count = %d\n",
+-		   obj->objectId, atomic_read(&inode->i_count)));
++			("yaffs_mknod created object %d count = %d\n",
++			obj->objectId, atomic_read(&inode->i_count)));
+ 		error = 0;
+ 	} else {
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_mknod failed making object\n"));
++			("yaffs_mknod failed making object\n"));
+ 		error = -ENOMEM;
+ 	}
+ 
+@@ -1098,25 +1302,19 @@ static int yaffs_mknod(struct inode *dir
+ static int yaffs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
+ {
+ 	int retVal;
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_mkdir\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_mkdir\n"));
+ 	retVal = yaffs_mknod(dir, dentry, mode | S_IFDIR, 0);
+-#if 0
+-	/* attempt to fix dir bug - didn't work */
+-	if (!retVal) {
+-		dget(dentry);
+-	}
+-#endif
+ 	return retVal;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode,
+ 			struct nameidata *n)
+ #else
+ static int yaffs_create(struct inode *dir, struct dentry *dentry, int mode)
+ #endif
+ {
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_create\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_create\n"));
+ 	return yaffs_mknod(dir, dentry, mode | S_IFREG, 0);
+ }
+ 
+@@ -1127,8 +1325,8 @@ static int yaffs_unlink(struct inode *di
+ 	yaffs_Device *dev;
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_unlink %d:%s\n", (int)(dir->i_ino),
+-	   dentry->d_name.name));
++		("yaffs_unlink %d:%s\n", (int)(dir->i_ino),
++		dentry->d_name.name));
+ 
+ 	dev = yaffs_InodeToObject(dir)->myDev;
+ 
+@@ -1151,82 +1349,74 @@ static int yaffs_unlink(struct inode *di
+  * Create a link...
+  */
+ static int yaffs_link(struct dentry *old_dentry, struct inode *dir,
+-		      struct dentry *dentry)
++			struct dentry *dentry)
+ {
+ 	struct inode *inode = old_dentry->d_inode;
+ 	yaffs_Object *obj = NULL;
+ 	yaffs_Object *link = NULL;
+ 	yaffs_Device *dev;
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_link\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_link\n"));
+ 
+ 	obj = yaffs_InodeToObject(inode);
+ 	dev = obj->myDev;
+ 
+ 	yaffs_GrossLock(dev);
+ 
+-	if (!S_ISDIR(inode->i_mode))	/* Don't link directories */
+-	{
+-		link =
+-		    yaffs_Link(yaffs_InodeToObject(dir), dentry->d_name.name,
+-			       obj);
+-	}
++	if (!S_ISDIR(inode->i_mode))		/* Don't link directories */
++		link = yaffs_Link(yaffs_InodeToObject(dir), dentry->d_name.name,
++			obj);
+ 
+ 	if (link) {
+ 		old_dentry->d_inode->i_nlink = yaffs_GetObjectLinkCount(obj);
+ 		d_instantiate(dentry, old_dentry->d_inode);
+ 		atomic_inc(&old_dentry->d_inode->i_count);
+ 		T(YAFFS_TRACE_OS,
+-		  (KERN_DEBUG "yaffs_link link count %d i_count %d\n",
+-		   old_dentry->d_inode->i_nlink,
+-		   atomic_read(&old_dentry->d_inode->i_count)));
+-
++			("yaffs_link link count %d i_count %d\n",
++			old_dentry->d_inode->i_nlink,
++			atomic_read(&old_dentry->d_inode->i_count)));
+ 	}
+ 
+ 	yaffs_GrossUnlock(dev);
+ 
+-	if (link) {
+-
++	if (link)
+ 		return 0;
+-	}
+ 
+ 	return -EPERM;
+ }
+ 
+ static int yaffs_symlink(struct inode *dir, struct dentry *dentry,
+-			 const char *symname)
++				const char *symname)
+ {
+ 	yaffs_Object *obj;
+ 	yaffs_Device *dev;
+-	uid_t uid = current->fsuid;
+-	gid_t gid = (dir->i_mode & S_ISGID) ? dir->i_gid : current->fsgid;
++	uid_t uid = YCRED(current)->fsuid;
++	gid_t gid = (dir->i_mode & S_ISGID) ? dir->i_gid : YCRED(current)->fsgid;
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_symlink\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_symlink\n"));
+ 
+ 	dev = yaffs_InodeToObject(dir)->myDev;
+ 	yaffs_GrossLock(dev);
+ 	obj = yaffs_MknodSymLink(yaffs_InodeToObject(dir), dentry->d_name.name,
+-				 S_IFLNK | S_IRWXUGO, uid, gid, symname);
++				S_IFLNK | S_IRWXUGO, uid, gid, symname);
+ 	yaffs_GrossUnlock(dev);
+ 
+ 	if (obj) {
+-
+ 		struct inode *inode;
+ 
+ 		inode = yaffs_get_inode(dir->i_sb, obj->yst_mode, 0, obj);
+ 		d_instantiate(dentry, inode);
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG "symlink created OK\n"));
++		T(YAFFS_TRACE_OS, ("symlink created OK\n"));
+ 		return 0;
+ 	} else {
+-		T(YAFFS_TRACE_OS, (KERN_DEBUG "symlink not created\n"));
+-
++		T(YAFFS_TRACE_OS, ("symlink not created\n"));
+ 	}
+ 
+ 	return -ENOMEM;
+ }
+ 
+ static int yaffs_sync_object(struct file *file, struct dentry *dentry,
+-			     int datasync)
++				int datasync)
+ {
+ 
+ 	yaffs_Object *obj;
+@@ -1236,7 +1426,7 @@ static int yaffs_sync_object(struct file
+ 
+ 	dev = obj->myDev;
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_sync_object\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_sync_object\n"));
+ 	yaffs_GrossLock(dev);
+ 	yaffs_FlushFile(obj, 1);
+ 	yaffs_GrossUnlock(dev);
+@@ -1255,41 +1445,36 @@ static int yaffs_rename(struct inode *ol
+ 	int retVal = YAFFS_FAIL;
+ 	yaffs_Object *target;
+ 
+-        T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_rename\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_rename\n"));
+ 	dev = yaffs_InodeToObject(old_dir)->myDev;
+ 
+ 	yaffs_GrossLock(dev);
+ 
+ 	/* Check if the target is an existing directory that is not empty. */
+-	target =
+-	    yaffs_FindObjectByName(yaffs_InodeToObject(new_dir),
+-				   new_dentry->d_name.name);
++	target = yaffs_FindObjectByName(yaffs_InodeToObject(new_dir),
++				new_dentry->d_name.name);
+ 
+ 
+ 
+-	if (target &&
+-	    target->variantType == YAFFS_OBJECT_TYPE_DIRECTORY &&
+-	    !list_empty(&target->variant.directoryVariant.children)) {
++	if (target && target->variantType == YAFFS_OBJECT_TYPE_DIRECTORY &&
++		!ylist_empty(&target->variant.directoryVariant.children)) {
+ 
+-	        T(YAFFS_TRACE_OS, (KERN_DEBUG "target is non-empty dir\n"));
++		T(YAFFS_TRACE_OS, ("target is non-empty dir\n"));
+ 
+ 		retVal = YAFFS_FAIL;
+ 	} else {
+-
+ 		/* Now does unlinking internally using shadowing mechanism */
+-	        T(YAFFS_TRACE_OS, (KERN_DEBUG "calling yaffs_RenameObject\n"));
+-
+-		retVal =
+-		    yaffs_RenameObject(yaffs_InodeToObject(old_dir),
+-				       old_dentry->d_name.name,
+-				       yaffs_InodeToObject(new_dir),
+-				       new_dentry->d_name.name);
++		T(YAFFS_TRACE_OS, ("calling yaffs_RenameObject\n"));
+ 
++		retVal = yaffs_RenameObject(yaffs_InodeToObject(old_dir),
++				old_dentry->d_name.name,
++				yaffs_InodeToObject(new_dir),
++				new_dentry->d_name.name);
+ 	}
+ 	yaffs_GrossUnlock(dev);
+ 
+ 	if (retVal == YAFFS_OK) {
+-		if(target) {
++		if (target) {
+ 			new_dentry->d_inode->i_nlink--;
+ 			mark_inode_dirty(new_dentry->d_inode);
+ 		}
+@@ -1298,7 +1483,6 @@ static int yaffs_rename(struct inode *ol
+ 	} else {
+ 		return -ENOTEMPTY;
+ 	}
+-
+ }
+ 
+ static int yaffs_setattr(struct dentry *dentry, struct iattr *attr)
+@@ -1308,15 +1492,15 @@ static int yaffs_setattr(struct dentry *
+ 	yaffs_Device *dev;
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_setattr of object %d\n",
+-	   yaffs_InodeToObject(inode)->objectId));
+-
+-	if ((error = inode_change_ok(inode, attr)) == 0) {
++		("yaffs_setattr of object %d\n",
++		yaffs_InodeToObject(inode)->objectId));
+ 
++	error = inode_change_ok(inode, attr);
++	if (error == 0) {
+ 		dev = yaffs_InodeToObject(inode)->myDev;
+ 		yaffs_GrossLock(dev);
+ 		if (yaffs_SetAttributes(yaffs_InodeToObject(inode), attr) ==
+-		    YAFFS_OK) {
++				YAFFS_OK) {
+ 			error = 0;
+ 		} else {
+ 			error = -EPERM;
+@@ -1328,12 +1512,12 @@ static int yaffs_setattr(struct dentry *
+ 	return error;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_statfs(struct dentry *dentry, struct kstatfs *buf)
+ {
+ 	yaffs_Device *dev = yaffs_DentryToObject(dentry)->myDev;
+ 	struct super_block *sb = dentry->d_sb;
+-#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_statfs(struct super_block *sb, struct kstatfs *buf)
+ {
+ 	yaffs_Device *dev = yaffs_SuperToDevice(sb);
+@@ -1343,32 +1527,53 @@ static int yaffs_statfs(struct super_blo
+ 	yaffs_Device *dev = yaffs_SuperToDevice(sb);
+ #endif
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_statfs\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_statfs\n"));
+ 
+ 	yaffs_GrossLock(dev);
+ 
+ 	buf->f_type = YAFFS_MAGIC;
+ 	buf->f_bsize = sb->s_blocksize;
+ 	buf->f_namelen = 255;
+-	if (sb->s_blocksize > dev->nDataBytesPerChunk) {
++
++	if (dev->nDataBytesPerChunk & (dev->nDataBytesPerChunk - 1)) {
++		/* Do this if chunk size is not a power of 2 */
++
++		uint64_t bytesInDev;
++		uint64_t bytesFree;
++
++		bytesInDev = ((uint64_t)((dev->endBlock - dev->startBlock + 1))) *
++			((uint64_t)(dev->nChunksPerBlock * dev->nDataBytesPerChunk));
++
++		do_div(bytesInDev, sb->s_blocksize); /* bytesInDev becomes the number of blocks */
++		buf->f_blocks = bytesInDev;
++
++		bytesFree  = ((uint64_t)(yaffs_GetNumberOfFreeChunks(dev))) *
++			((uint64_t)(dev->nDataBytesPerChunk));
++
++		do_div(bytesFree, sb->s_blocksize);
++
++		buf->f_bfree = bytesFree;
++
++	} else if (sb->s_blocksize > dev->nDataBytesPerChunk) {
+ 
+ 		buf->f_blocks =
+-		    (dev->endBlock - dev->startBlock +
+-		     1) * dev->nChunksPerBlock / (sb->s_blocksize /
+-						  dev->nDataBytesPerChunk);
++			(dev->endBlock - dev->startBlock + 1) *
++			dev->nChunksPerBlock /
++			(sb->s_blocksize / dev->nDataBytesPerChunk);
+ 		buf->f_bfree =
+-		    yaffs_GetNumberOfFreeChunks(dev) / (sb->s_blocksize /
+-							dev->nDataBytesPerChunk);
++			yaffs_GetNumberOfFreeChunks(dev) /
++			(sb->s_blocksize / dev->nDataBytesPerChunk);
+ 	} else {
+-
+ 		buf->f_blocks =
+-		    (dev->endBlock - dev->startBlock +
+-		     1) * dev->nChunksPerBlock * (dev->nDataBytesPerChunk /
+-						  sb->s_blocksize);
++			(dev->endBlock - dev->startBlock + 1) *
++			dev->nChunksPerBlock *
++			(dev->nDataBytesPerChunk / sb->s_blocksize);
++
+ 		buf->f_bfree =
+-		    yaffs_GetNumberOfFreeChunks(dev) * (dev->nDataBytesPerChunk /
+-							sb->s_blocksize);
++			yaffs_GetNumberOfFreeChunks(dev) *
++			(dev->nDataBytesPerChunk / sb->s_blocksize);
+ 	}
++
+ 	buf->f_files = 0;
+ 	buf->f_ffree = 0;
+ 	buf->f_bavail = buf->f_bfree;
+@@ -1378,18 +1583,19 @@ static int yaffs_statfs(struct super_blo
+ }
+ 
+ 
+-/**
+ static int yaffs_do_sync_fs(struct super_block *sb)
+ {
+ 
+ 	yaffs_Device *dev = yaffs_SuperToDevice(sb);
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_do_sync_fs\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_do_sync_fs\n"));
+ 
+-	if(sb->s_dirt) {
++	if (sb->s_dirt) {
+ 		yaffs_GrossLock(dev);
+ 
+-		if(dev)
++		if (dev) {
++			yaffs_FlushEntireDeviceCache(dev);
+ 			yaffs_CheckpointSave(dev);
++		}
+ 
+ 		yaffs_GrossUnlock(dev);
+ 
+@@ -1397,35 +1603,73 @@ static int yaffs_do_sync_fs(struct super
+ 	}
+ 	return 0;
+ }
+-**/
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static void yaffs_write_super(struct super_block *sb)
+ #else
+ static int yaffs_write_super(struct super_block *sb)
+ #endif
+ {
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_write_super\n"));
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18))
+-	return 0; /* yaffs_do_sync_fs(sb);*/
++	T(YAFFS_TRACE_OS, ("yaffs_write_super\n"));
++	if (yaffs_auto_checkpoint >= 2)
++		yaffs_do_sync_fs(sb);
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 18))
++	return 0;
+ #endif
+ }
+ 
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_sync_fs(struct super_block *sb, int wait)
+ #else
+ static int yaffs_sync_fs(struct super_block *sb)
+ #endif
+ {
++	T(YAFFS_TRACE_OS, ("yaffs_sync_fs\n"));
++
++	if (yaffs_auto_checkpoint >= 1)
++		yaffs_do_sync_fs(sb);
++
++	return 0;
++}
++
++#ifdef YAFFS_USE_OWN_IGET
++
++static struct inode *yaffs_iget(struct super_block *sb, unsigned long ino)
++{
++	struct inode *inode;
++	yaffs_Object *obj;
++	yaffs_Device *dev = yaffs_SuperToDevice(sb);
++
++	T(YAFFS_TRACE_OS,
++		("yaffs_iget for %lu\n", ino));
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_sync_fs\n"));
++	inode = iget_locked(sb, ino);
++	if (!inode)
++		return ERR_PTR(-ENOMEM);
++	if (!(inode->i_state & I_NEW))
++		return inode;
++
++	/* NB This is called as a side effect of other functions, but
++	 * we had to release the lock to prevent deadlocks, so
++	 * need to lock again.
++	 */
+ 
+-	return 0; /* yaffs_do_sync_fs(sb);*/
++	yaffs_GrossLock(dev);
+ 
++	obj = yaffs_FindObjectByNumber(dev, inode->i_ino);
++
++	yaffs_FillInodeFromObject(inode, obj);
++
++	yaffs_GrossUnlock(dev);
++
++	unlock_new_inode(inode);
++	return inode;
+ }
+ 
++#else
+ 
+ static void yaffs_read_inode(struct inode *inode)
+ {
+@@ -1438,7 +1682,7 @@ static void yaffs_read_inode(struct inod
+ 	yaffs_Device *dev = yaffs_SuperToDevice(inode->i_sb);
+ 
+ 	T(YAFFS_TRACE_OS,
+-	  (KERN_DEBUG "yaffs_read_inode for %d\n", (int)inode->i_ino));
++		("yaffs_read_inode for %d\n", (int)inode->i_ino));
+ 
+ 	yaffs_GrossLock(dev);
+ 
+@@ -1449,18 +1693,20 @@ static void yaffs_read_inode(struct inod
+ 	yaffs_GrossUnlock(dev);
+ }
+ 
+-static LIST_HEAD(yaffs_dev_list);
++#endif
++
++static YLIST_HEAD(yaffs_dev_list);
+ 
+-#if 0 // not used
++#if 0 /* not used */
+ static int yaffs_remount_fs(struct super_block *sb, int *flags, char *data)
+ {
+ 	yaffs_Device    *dev = yaffs_SuperToDevice(sb);
+ 
+-	if( *flags & MS_RDONLY ) {
++	if (*flags & MS_RDONLY) {
+ 		struct mtd_info *mtd = yaffs_SuperToDevice(sb)->genericDevice;
+ 
+ 		T(YAFFS_TRACE_OS,
+-			(KERN_DEBUG "yaffs_remount_fs: %s: RO\n", dev->name ));
++			("yaffs_remount_fs: %s: RO\n", dev->name));
+ 
+ 		yaffs_GrossLock(dev);
+ 
+@@ -1472,10 +1718,9 @@ static int yaffs_remount_fs(struct super
+ 			mtd->sync(mtd);
+ 
+ 		yaffs_GrossUnlock(dev);
+-	}
+-	else {
++	} else {
+ 		T(YAFFS_TRACE_OS,
+-			(KERN_DEBUG "yaffs_remount_fs: %s: RW\n", dev->name ));
++			("yaffs_remount_fs: %s: RW\n", dev->name));
+ 	}
+ 
+ 	return 0;
+@@ -1486,7 +1731,7 @@ static void yaffs_put_super(struct super
+ {
+ 	yaffs_Device *dev = yaffs_SuperToDevice(sb);
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_put_super\n"));
++	T(YAFFS_TRACE_OS, ("yaffs_put_super\n"));
+ 
+ 	yaffs_GrossLock(dev);
+ 
+@@ -1494,18 +1739,17 @@ static void yaffs_put_super(struct super
+ 
+ 	yaffs_CheckpointSave(dev);
+ 
+-	if (dev->putSuperFunc) {
++	if (dev->putSuperFunc)
+ 		dev->putSuperFunc(sb);
+-	}
+ 
+ 	yaffs_Deinitialise(dev);
+ 
+ 	yaffs_GrossUnlock(dev);
+ 
+ 	/* we assume this is protected by lock_kernel() in mount/umount */
+-	list_del(&dev->devList);
++	ylist_del(&dev->devList);
+ 
+-	if(dev->spareBuffer){
++	if (dev->spareBuffer) {
+ 		YFREE(dev->spareBuffer);
+ 		dev->spareBuffer = NULL;
+ 	}
+@@ -1516,12 +1760,10 @@ static void yaffs_put_super(struct super
+ 
+ static void yaffs_MTDPutSuper(struct super_block *sb)
+ {
+-
+ 	struct mtd_info *mtd = yaffs_SuperToDevice(sb)->genericDevice;
+ 
+-	if (mtd->sync) {
++	if (mtd->sync)
+ 		mtd->sync(mtd);
+-	}
+ 
+ 	put_mtd_device(mtd);
+ }
+@@ -1531,9 +1773,9 @@ static void yaffs_MarkSuperBlockDirty(vo
+ {
+ 	struct super_block *sb = (struct super_block *)vsb;
+ 
+-	T(YAFFS_TRACE_OS, (KERN_DEBUG "yaffs_MarkSuperBlockDirty() sb = %p\n",sb));
+-//	if(sb)
+-//		sb->s_dirt = 1;
++	T(YAFFS_TRACE_OS, ("yaffs_MarkSuperBlockDirty() sb = %p\n", sb));
++	if (sb)
++		sb->s_dirt = 1;
+ }
+ 
+ typedef struct {
+@@ -1546,48 +1788,48 @@ typedef struct {
+ #define MAX_OPT_LEN 20
+ static int yaffs_parse_options(yaffs_options *options, const char *options_str)
+ {
+-	char cur_opt[MAX_OPT_LEN+1];
++	char cur_opt[MAX_OPT_LEN + 1];
+ 	int p;
+ 	int error = 0;
+ 
+ 	/* Parse through the options which is a comma seperated list */
+ 
+-	while(options_str && *options_str && !error){
+-		memset(cur_opt,0,MAX_OPT_LEN+1);
++	while (options_str && *options_str && !error) {
++		memset(cur_opt, 0, MAX_OPT_LEN + 1);
+ 		p = 0;
+ 
+-		while(*options_str && *options_str != ','){
+-			if(p < MAX_OPT_LEN){
++		while (*options_str && *options_str != ',') {
++			if (p < MAX_OPT_LEN) {
+ 				cur_opt[p] = *options_str;
+ 				p++;
+ 			}
+ 			options_str++;
+ 		}
+ 
+-		if(!strcmp(cur_opt,"inband-tags"))
++		if (!strcmp(cur_opt, "inband-tags"))
+ 			options->inband_tags = 1;
+-		else if(!strcmp(cur_opt,"no-cache"))
++		else if (!strcmp(cur_opt, "no-cache"))
+ 			options->no_cache = 1;
+-		else if(!strcmp(cur_opt,"no-checkpoint-read"))
++		else if (!strcmp(cur_opt, "no-checkpoint-read"))
+ 			options->skip_checkpoint_read = 1;
+-		else if(!strcmp(cur_opt,"no-checkpoint-write"))
++		else if (!strcmp(cur_opt, "no-checkpoint-write"))
+ 			options->skip_checkpoint_write = 1;
+-		else if(!strcmp(cur_opt,"no-checkpoint")){
++		else if (!strcmp(cur_opt, "no-checkpoint")) {
+ 			options->skip_checkpoint_read = 1;
+ 			options->skip_checkpoint_write = 1;
+ 		} else {
+-			printk(KERN_INFO "yaffs: Bad mount option \"%s\"\n",cur_opt);
++			printk(KERN_INFO "yaffs: Bad mount option \"%s\"\n",
++					cur_opt);
+ 			error = 1;
+ 		}
+-
+ 	}
+ 
+ 	return error;
+ }
+ 
+ static struct super_block *yaffs_internal_read_super(int yaffsVersion,
+-						     struct super_block *sb,
+-						     void *data, int silent)
++						struct super_block *sb,
++						void *data, int silent)
+ {
+ 	int nBlocks;
+ 	struct inode *inode = NULL;
+@@ -1602,6 +1844,7 @@ static struct super_block *yaffs_interna
+ 
+ 	sb->s_magic = YAFFS_MAGIC;
+ 	sb->s_op = &yaffs_super_ops;
++	sb->s_flags |= MS_NOATIME;
+ 
+ 	if (!sb)
+ 		printk(KERN_INFO "yaffs: sb is NULL\n");
+@@ -1614,14 +1857,14 @@ static struct super_block *yaffs_interna
+ 		       sb->s_dev,
+ 		       yaffs_devname(sb, devname_buf));
+ 
+-	if(!data_str)
++	if (!data_str)
+ 		data_str = "";
+ 
+-	printk(KERN_INFO "yaffs: passed flags \"%s\"\n",data_str);
++	printk(KERN_INFO "yaffs: passed flags \"%s\"\n", data_str);
+ 
+-	memset(&options,0,sizeof(options));
++	memset(&options, 0, sizeof(options));
+ 
+-	if(yaffs_parse_options(&options,data_str)){
++	if (yaffs_parse_options(&options, data_str)) {
+ 		/* Option parsing failed */
+ 		return NULL;
+ 	}
+@@ -1645,9 +1888,9 @@ static struct super_block *yaffs_interna
+ 			       yaffs_devname(sb, devname_buf)));
+ 
+ 	/* Check it's an mtd device..... */
+-	if (MAJOR(sb->s_dev) != MTD_BLOCK_MAJOR) {
++	if (MAJOR(sb->s_dev) != MTD_BLOCK_MAJOR)
+ 		return NULL;	/* This isn't an mtd device */
+-	}
++
+ 	/* Get the device */
+ 	mtd = get_mtd_device(NULL, MINOR(sb->s_dev));
+ 	if (!mtd) {
+@@ -1673,29 +1916,23 @@ static struct super_block *yaffs_interna
+ 	T(YAFFS_TRACE_OS, (" %s %d\n", WRITE_SIZE_STR, WRITE_SIZE(mtd)));
+ 	T(YAFFS_TRACE_OS, (" oobsize %d\n", mtd->oobsize));
+ 	T(YAFFS_TRACE_OS, (" erasesize %d\n", mtd->erasesize));
+-	T(YAFFS_TRACE_OS, (" size %d\n", mtd->size));
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 29)
++	T(YAFFS_TRACE_OS, (" size %u\n", mtd->size));
++#else
++	T(YAFFS_TRACE_OS, (" size %lld\n", mtd->size));
++#endif
+ 
+ #ifdef CONFIG_YAFFS_AUTO_YAFFS2
+ 
+-	if (yaffsVersion == 1 &&
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-	    mtd->writesize >= 2048) {
+-#else
+-	    mtd->oobblock >= 2048) {
+-#endif
+-	    T(YAFFS_TRACE_ALWAYS,("yaffs: auto selecting yaffs2\n"));
+-	    yaffsVersion = 2;
++	if (yaffsVersion == 1 && WRITE_SIZE(mtd) >= 2048) {
++		T(YAFFS_TRACE_ALWAYS, ("yaffs: auto selecting yaffs2\n"));
++		yaffsVersion = 2;
+ 	}
+ 
+ 	/* Added NCB 26/5/2006 for completeness */
+-	if (yaffsVersion == 2 &&
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-	    mtd->writesize == 512) {
+-#else
+-	    mtd->oobblock == 512) {
+-#endif
+-	    T(YAFFS_TRACE_ALWAYS,("yaffs: auto selecting yaffs1\n"));
+-	    yaffsVersion = 1;
++	if (yaffsVersion == 2 && !options.inband_tags && WRITE_SIZE(mtd) == 512) {
++		T(YAFFS_TRACE_ALWAYS, ("yaffs: auto selecting yaffs1\n"));
++		yaffsVersion = 1;
+ 	}
+ 
+ #endif
+@@ -1707,7 +1944,7 @@ static struct super_block *yaffs_interna
+ 		    !mtd->block_markbad ||
+ 		    !mtd->read ||
+ 		    !mtd->write ||
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ 		    !mtd->read_oob || !mtd->write_oob) {
+ #else
+ 		    !mtd->write_ecc ||
+@@ -1719,12 +1956,9 @@ static struct super_block *yaffs_interna
+ 			return NULL;
+ 		}
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-		if (mtd->writesize < YAFFS_MIN_YAFFS2_CHUNK_SIZE ||
+-#else
+-		if (mtd->oobblock < YAFFS_MIN_YAFFS2_CHUNK_SIZE ||
+-#endif
+-		    mtd->oobsize < YAFFS_MIN_YAFFS2_SPARE_SIZE) {
++		if ((WRITE_SIZE(mtd) < YAFFS_MIN_YAFFS2_CHUNK_SIZE ||
++		    mtd->oobsize < YAFFS_MIN_YAFFS2_SPARE_SIZE) &&
++		    !options.inband_tags) {
+ 			T(YAFFS_TRACE_ALWAYS,
+ 			  ("yaffs: MTD device does not have the "
+ 			   "right page sizes\n"));
+@@ -1735,7 +1969,7 @@ static struct super_block *yaffs_interna
+ 		if (!mtd->erase ||
+ 		    !mtd->read ||
+ 		    !mtd->write ||
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ 		    !mtd->read_oob || !mtd->write_oob) {
+ #else
+ 		    !mtd->write_ecc ||
+@@ -1761,7 +1995,7 @@ static struct super_block *yaffs_interna
+ 	 * Set the yaffs_Device up for mtd
+ 	 */
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ 	sb->s_fs_info = dev = kmalloc(sizeof(yaffs_Device), GFP_KERNEL);
+ #else
+ 	sb->u.generic_sbp = dev = kmalloc(sizeof(yaffs_Device), GFP_KERNEL);
+@@ -1780,13 +2014,15 @@ static struct super_block *yaffs_interna
+ 
+ 	/* Set up the memory size parameters.... */
+ 
+-	nBlocks = mtd->size / (YAFFS_CHUNKS_PER_BLOCK * YAFFS_BYTES_PER_CHUNK);
++	nBlocks = YCALCBLOCKS(mtd->size, (YAFFS_CHUNKS_PER_BLOCK * YAFFS_BYTES_PER_CHUNK));
++
+ 	dev->startBlock = 0;
+ 	dev->endBlock = nBlocks - 1;
+ 	dev->nChunksPerBlock = YAFFS_CHUNKS_PER_BLOCK;
+-	dev->nDataBytesPerChunk = YAFFS_BYTES_PER_CHUNK;
++	dev->totalBytesPerChunk = YAFFS_BYTES_PER_CHUNK;
+ 	dev->nReservedBlocks = 5;
+ 	dev->nShortOpCaches = (options.no_cache) ? 0 : 10;
++	dev->inbandTags = options.inband_tags;
+ 
+ 	/* ... and the functions. */
+ 	if (yaffsVersion == 2) {
+@@ -1798,20 +2034,19 @@ static struct super_block *yaffs_interna
+ 		dev->queryNANDBlock = nandmtd2_QueryNANDBlock;
+ 		dev->spareBuffer = YMALLOC(mtd->oobsize);
+ 		dev->isYaffs2 = 1;
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-		dev->nDataBytesPerChunk = mtd->writesize;
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
++		dev->totalBytesPerChunk = mtd->writesize;
+ 		dev->nChunksPerBlock = mtd->erasesize / mtd->writesize;
+ #else
+-		dev->nDataBytesPerChunk = mtd->oobblock;
++		dev->totalBytesPerChunk = mtd->oobblock;
+ 		dev->nChunksPerBlock = mtd->erasesize / mtd->oobblock;
+ #endif
+-		nBlocks = mtd->size / mtd->erasesize;
++		nBlocks = YCALCBLOCKS(mtd->size, mtd->erasesize);
+ 
+-		dev->nCheckpointReservedBlocks = CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS;
+ 		dev->startBlock = 0;
+ 		dev->endBlock = nBlocks - 1;
+ 	} else {
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ 		/* use the MTD interface in yaffs_mtdif1.c */
+ 		dev->writeChunkWithTagsToNAND =
+ 			nandmtd1_WriteChunkWithTagsToNAND;
+@@ -1847,7 +2082,7 @@ static struct super_block *yaffs_interna
+ 	dev->skipCheckpointWrite = options.skip_checkpoint_write;
+ 
+ 	/* we assume this is protected by lock_kernel() in mount/umount */
+-	list_add_tail(&dev->devList, &yaffs_dev_list);
++	ylist_add_tail(&dev->devList, &yaffs_dev_list);
+ 
+ 	init_MUTEX(&dev->grossLock);
+ 
+@@ -1884,20 +2119,23 @@ static struct super_block *yaffs_interna
+ 		return NULL;
+ 	}
+ 	sb->s_root = root;
++	sb->s_dirt = !dev->isCheckpointed;
++	T(YAFFS_TRACE_ALWAYS,
++	  ("yaffs_read_super: isCheckpointed %d\n", dev->isCheckpointed));
+ 
+ 	T(YAFFS_TRACE_OS, ("yaffs_read_super: done\n"));
+ 	return sb;
+ }
+ 
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs_internal_read_super_mtd(struct super_block *sb, void *data,
+ 					 int silent)
+ {
+ 	return yaffs_internal_read_super(1, sb, data, silent) ? 0 : -EINVAL;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs_read_super(struct file_system_type *fs,
+ 			    int flags, const char *dev_name,
+ 			    void *data, struct vfsmount *mnt)
+@@ -1938,14 +2176,14 @@ static DECLARE_FSTYPE(yaffs_fs_type, "ya
+ 
+ #ifdef CONFIG_YAFFS_YAFFS2
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ static int yaffs2_internal_read_super_mtd(struct super_block *sb, void *data,
+ 					  int silent)
+ {
+ 	return yaffs_internal_read_super(2, sb, data, silent) ? 0 : -EINVAL;
+ }
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
+ static int yaffs2_read_super(struct file_system_type *fs,
+ 			int flags, const char *dev_name, void *data,
+ 			struct vfsmount *mnt)
+@@ -1990,12 +2228,12 @@ static char *yaffs_dump_dev(char *buf, y
+ {
+ 	buf += sprintf(buf, "startBlock......... %d\n", dev->startBlock);
+ 	buf += sprintf(buf, "endBlock........... %d\n", dev->endBlock);
++	buf += sprintf(buf, "totalBytesPerChunk. %d\n", dev->totalBytesPerChunk);
+ 	buf += sprintf(buf, "nDataBytesPerChunk. %d\n", dev->nDataBytesPerChunk);
+ 	buf += sprintf(buf, "chunkGroupBits..... %d\n", dev->chunkGroupBits);
+ 	buf += sprintf(buf, "chunkGroupSize..... %d\n", dev->chunkGroupSize);
+ 	buf += sprintf(buf, "nErasedBlocks...... %d\n", dev->nErasedBlocks);
+ 	buf += sprintf(buf, "nReservedBlocks.... %d\n", dev->nReservedBlocks);
+-	buf += sprintf(buf, "nCheckptResBlocks.. %d\n", dev->nCheckpointReservedBlocks);
+ 	buf += sprintf(buf, "blocksInCheckpoint. %d\n", dev->blocksInCheckpoint);
+ 	buf += sprintf(buf, "nTnodesCreated..... %d\n", dev->nTnodesCreated);
+ 	buf += sprintf(buf, "nFreeTnodes........ %d\n", dev->nFreeTnodes);
+@@ -2006,10 +2244,8 @@ static char *yaffs_dump_dev(char *buf, y
+ 	buf += sprintf(buf, "nPageReads......... %d\n", dev->nPageReads);
+ 	buf += sprintf(buf, "nBlockErasures..... %d\n", dev->nBlockErasures);
+ 	buf += sprintf(buf, "nGCCopies.......... %d\n", dev->nGCCopies);
+-	buf +=
+-	    sprintf(buf, "garbageCollections. %d\n", dev->garbageCollections);
+-	buf +=
+-	    sprintf(buf, "passiveGCs......... %d\n",
++	buf += sprintf(buf, "garbageCollections. %d\n", dev->garbageCollections);
++	buf += sprintf(buf, "passiveGCs......... %d\n",
+ 		    dev->passiveGarbageCollections);
+ 	buf += sprintf(buf, "nRetriedWrites..... %d\n", dev->nRetriedWrites);
+ 	buf += sprintf(buf, "nShortOpCaches..... %d\n", dev->nShortOpCaches);
+@@ -2025,6 +2261,7 @@ static char *yaffs_dump_dev(char *buf, y
+ 	    sprintf(buf, "nBackgroudDeletions %d\n", dev->nBackgroundDeletions);
+ 	buf += sprintf(buf, "useNANDECC......... %d\n", dev->useNANDECC);
+ 	buf += sprintf(buf, "isYaffs2........... %d\n", dev->isYaffs2);
++	buf += sprintf(buf, "inbandTags......... %d\n", dev->inbandTags);
+ 
+ 	return buf;
+ }
+@@ -2033,7 +2270,7 @@ static int yaffs_proc_read(char *page,
+ 			   char **start,
+ 			   off_t offset, int count, int *eof, void *data)
+ {
+-	struct list_head *item;
++	struct ylist_head *item;
+ 	char *buf = page;
+ 	int step = offset;
+ 	int n = 0;
+@@ -2057,8 +2294,8 @@ static int yaffs_proc_read(char *page,
+ 	lock_kernel();
+ 
+ 	/* Locate and print the Nth entry.  Order N-squared but N is small. */
+-	list_for_each(item, &yaffs_dev_list) {
+-		yaffs_Device *dev = list_entry(item, yaffs_Device, devList);
++	ylist_for_each(item, &yaffs_dev_list) {
++		yaffs_Device *dev = ylist_entry(item, yaffs_Device, devList);
+ 		if (n < step) {
+ 			n++;
+ 			continue;
+@@ -2119,7 +2356,7 @@ static int yaffs_proc_write(struct file
+ 	char *end;
+ 	char *mask_name;
+ 	const char *x;
+-	char substring[MAX_MASK_NAME_LENGTH+1];
++	char substring[MAX_MASK_NAME_LENGTH + 1];
+ 	int i;
+ 	int done = 0;
+ 	int add, len = 0;
+@@ -2129,9 +2366,8 @@ static int yaffs_proc_write(struct file
+ 
+ 	while (!done && (pos < count)) {
+ 		done = 1;
+-		while ((pos < count) && isspace(buf[pos])) {
++		while ((pos < count) && isspace(buf[pos]))
+ 			pos++;
+-		}
+ 
+ 		switch (buf[pos]) {
+ 		case '+':
+@@ -2148,20 +2384,21 @@ static int yaffs_proc_write(struct file
+ 		mask_name = NULL;
+ 
+ 		mask_bitfield = simple_strtoul(buf + pos, &end, 0);
++
+ 		if (end > buf + pos) {
+ 			mask_name = "numeral";
+ 			len = end - (buf + pos);
+ 			pos += len;
+ 			done = 0;
+ 		} else {
+-			for(x = buf + pos, i = 0;
+-			    (*x == '_' || (*x >='a' && *x <= 'z')) &&
+-			    i <MAX_MASK_NAME_LENGTH; x++, i++, pos++)
+-			    substring[i] = *x;
++			for (x = buf + pos, i = 0;
++			    (*x == '_' || (*x >= 'a' && *x <= 'z')) &&
++			    i < MAX_MASK_NAME_LENGTH; x++, i++, pos++)
++				substring[i] = *x;
+ 			substring[i] = '\0';
+ 
+ 			for (i = 0; mask_flags[i].mask_name != NULL; i++) {
+-				if(strcmp(substring,mask_flags[i].mask_name) == 0){
++				if (strcmp(substring, mask_flags[i].mask_name) == 0) {
+ 					mask_name = mask_flags[i].mask_name;
+ 					mask_bitfield = mask_flags[i].mask_bitfield;
+ 					done = 0;
+@@ -2172,7 +2409,7 @@ static int yaffs_proc_write(struct file
+ 
+ 		if (mask_name != NULL) {
+ 			done = 0;
+-			switch(add) {
++			switch (add) {
+ 			case '-':
+ 				rg &= ~mask_bitfield;
+ 				break;
+@@ -2191,13 +2428,13 @@ static int yaffs_proc_write(struct file
+ 
+ 	yaffs_traceMask = rg | YAFFS_TRACE_ALWAYS;
+ 
+-	printk("new trace = 0x%08X\n",yaffs_traceMask);
++	printk(KERN_DEBUG "new trace = 0x%08X\n", yaffs_traceMask);
+ 
+ 	if (rg & YAFFS_TRACE_ALWAYS) {
+ 		for (i = 0; mask_flags[i].mask_name != NULL; i++) {
+ 			char flag;
+ 			flag = ((rg & mask_flags[i].mask_bitfield) == mask_flags[i].mask_bitfield) ? '+' : '-';
+-			printk("%c%s\n", flag, mask_flags[i].mask_name);
++			printk(KERN_DEBUG "%c%s\n", flag, mask_flags[i].mask_name);
+ 		}
+ 	}
+ 
+@@ -2211,12 +2448,8 @@ struct file_system_to_install {
+ };
+ 
+ static struct file_system_to_install fs_to_install[] = {
+-//#ifdef CONFIG_YAFFS_YAFFS1
+ 	{&yaffs_fs_type, 0},
+-//#endif
+-//#ifdef CONFIG_YAFFS_YAFFS2
+ 	{&yaffs2_fs_type, 0},
+-//#endif
+ 	{NULL, 0}
+ };
+ 
+@@ -2231,15 +2464,14 @@ static int __init init_yaffs_fs(void)
+ 	/* Install the proc_fs entry */
+ 	my_proc_entry = create_proc_entry("yaffs",
+ 					       S_IRUGO | S_IFREG,
+-					       &proc_root);
++					       YPROC_ROOT);
+ 
+ 	if (my_proc_entry) {
+ 		my_proc_entry->write_proc = yaffs_proc_write;
+ 		my_proc_entry->read_proc = yaffs_proc_read;
+ 		my_proc_entry->data = NULL;
+-	} else {
++	} else
+ 		return -ENOMEM;
+-	}
+ 
+ 	/* Now add the file system entries */
+ 
+@@ -2247,9 +2479,8 @@ static int __init init_yaffs_fs(void)
+ 
+ 	while (fsinst->fst && !error) {
+ 		error = register_filesystem(fsinst->fst);
+-		if (!error) {
++		if (!error)
+ 			fsinst->installed = 1;
+-		}
+ 		fsinst++;
+ 	}
+ 
+@@ -2277,7 +2508,7 @@ static void __exit exit_yaffs_fs(void)
+ 	T(YAFFS_TRACE_ALWAYS, ("yaffs " __DATE__ " " __TIME__
+ 			       " removing. \n"));
+ 
+-	remove_proc_entry("yaffs", &proc_root);
++	remove_proc_entry("yaffs", YPROC_ROOT);
+ 
+ 	fsinst = fs_to_install;
+ 
+@@ -2288,7 +2519,6 @@ static void __exit exit_yaffs_fs(void)
+ 		}
+ 		fsinst++;
+ 	}
+-
+ }
+ 
+ module_init(init_yaffs_fs)
+--- /dev/null
++++ b/fs/yaffs2/yaffs_getblockinfo.h
+@@ -0,0 +1,34 @@
++/*
++ * YAFFS: Yet another Flash File System . A NAND-flash specific file system.
++ *
++ * Copyright (C) 2002-2007 Aleph One Ltd.
++ *   for Toby Churchill Ltd and Brightstar Engineering
++ *
++ * Created by Charles Manning <charles@aleph1.co.uk>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU Lesser General Public License version 2.1 as
++ * published by the Free Software Foundation.
++ *
++ * Note: Only YAFFS headers are LGPL, YAFFS C code is covered by GPL.
++ */
++
++#ifndef __YAFFS_GETBLOCKINFO_H__
++#define __YAFFS_GETBLOCKINFO_H__
++
++#include "yaffs_guts.h"
++
++/* Function to manipulate block info */
++static Y_INLINE yaffs_BlockInfo *yaffs_GetBlockInfo(yaffs_Device * dev, int blk)
++{
++	if (blk < dev->internalStartBlock || blk > dev->internalEndBlock) {
++		T(YAFFS_TRACE_ERROR,
++		  (TSTR
++		   ("**>> yaffs: getBlockInfo block %d is not valid" TENDSTR),
++		   blk));
++		YBUG();
++	}
++	return &dev->blockInfo[blk - dev->internalStartBlock];
++}
++
++#endif
+--- a/fs/yaffs2/yaffs_guts.c
++++ b/fs/yaffs2/yaffs_guts.c
+@@ -12,16 +12,17 @@
+  */
+ 
+ const char *yaffs_guts_c_version =
+-    "$Id: yaffs_guts.c,v 1.49 2007-05-15 20:07:40 charles Exp $";
++    "$Id: yaffs_guts.c,v 1.82 2009-03-09 04:24:17 charles Exp $";
+ 
+ #include "yportenv.h"
+ 
+ #include "yaffsinterface.h"
+ #include "yaffs_guts.h"
+ #include "yaffs_tagsvalidity.h"
++#include "yaffs_getblockinfo.h"
+ 
+ #include "yaffs_tagscompat.h"
+-#ifndef  CONFIG_YAFFS_USE_OWN_SORT
++#ifndef CONFIG_YAFFS_USE_OWN_SORT
+ #include "yaffs_qsort.h"
+ #endif
+ #include "yaffs_nand.h"
+@@ -32,116 +33,116 @@ const char *yaffs_guts_c_version =
+ #include "yaffs_packedtags2.h"
+ 
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-void yfsd_LockYAFFS(BOOL fsLockOnly);
+-void yfsd_UnlockYAFFS(BOOL fsLockOnly);
+-#endif
+-
+ #define YAFFS_PASSIVE_GC_CHUNKS 2
+ 
+ #include "yaffs_ecc.h"
+ 
+ 
+ /* Robustification (if it ever comes about...) */
+-static void yaffs_RetireBlock(yaffs_Device * dev, int blockInNAND);
+-static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND, int erasedOk);
+-static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+-				     const __u8 * data,
+-				     const yaffs_ExtendedTags * tags);
+-static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+-				    const yaffs_ExtendedTags * tags);
++static void yaffs_RetireBlock(yaffs_Device *dev, int blockInNAND);
++static void yaffs_HandleWriteChunkError(yaffs_Device *dev, int chunkInNAND,
++		int erasedOk);
++static void yaffs_HandleWriteChunkOk(yaffs_Device *dev, int chunkInNAND,
++				const __u8 *data,
++				const yaffs_ExtendedTags *tags);
++static void yaffs_HandleUpdateChunk(yaffs_Device *dev, int chunkInNAND,
++				const yaffs_ExtendedTags *tags);
+ 
+ /* Other local prototypes */
+-static int yaffs_UnlinkObject( yaffs_Object *obj);
++static int yaffs_UnlinkObject(yaffs_Object *obj);
+ static int yaffs_ObjectHasCachedWriteData(yaffs_Object *obj);
+ 
+ static void yaffs_HardlinkFixup(yaffs_Device *dev, yaffs_Object *hardList);
+ 
+-static int yaffs_WriteNewChunkWithTagsToNAND(yaffs_Device * dev,
+-					     const __u8 * buffer,
+-					     yaffs_ExtendedTags * tags,
+-					     int useReserve);
+-static int yaffs_PutChunkIntoFile(yaffs_Object * in, int chunkInInode,
+-				  int chunkInNAND, int inScan);
+-
+-static yaffs_Object *yaffs_CreateNewObject(yaffs_Device * dev, int number,
+-					   yaffs_ObjectType type);
+-static void yaffs_AddObjectToDirectory(yaffs_Object * directory,
+-				       yaffs_Object * obj);
+-static int yaffs_UpdateObjectHeader(yaffs_Object * in, const YCHAR * name,
+-				    int force, int isShrink, int shadows);
+-static void yaffs_RemoveObjectFromDirectory(yaffs_Object * obj);
++static int yaffs_WriteNewChunkWithTagsToNAND(yaffs_Device *dev,
++					const __u8 *buffer,
++					yaffs_ExtendedTags *tags,
++					int useReserve);
++static int yaffs_PutChunkIntoFile(yaffs_Object *in, int chunkInInode,
++				int chunkInNAND, int inScan);
++
++static yaffs_Object *yaffs_CreateNewObject(yaffs_Device *dev, int number,
++					yaffs_ObjectType type);
++static void yaffs_AddObjectToDirectory(yaffs_Object *directory,
++				yaffs_Object *obj);
++static int yaffs_UpdateObjectHeader(yaffs_Object *in, const YCHAR *name,
++				int force, int isShrink, int shadows);
++static void yaffs_RemoveObjectFromDirectory(yaffs_Object *obj);
+ static int yaffs_CheckStructures(void);
+-static int yaffs_DeleteWorker(yaffs_Object * in, yaffs_Tnode * tn, __u32 level,
+-			      int chunkOffset, int *limit);
+-static int yaffs_DoGenericObjectDeletion(yaffs_Object * in);
+-
+-static yaffs_BlockInfo *yaffs_GetBlockInfo(yaffs_Device * dev, int blockNo);
+-
+-static __u8 *yaffs_GetTempBuffer(yaffs_Device * dev, int lineNo);
+-static void yaffs_ReleaseTempBuffer(yaffs_Device * dev, __u8 * buffer,
+-				    int lineNo);
++static int yaffs_DeleteWorker(yaffs_Object *in, yaffs_Tnode *tn, __u32 level,
++			int chunkOffset, int *limit);
++static int yaffs_DoGenericObjectDeletion(yaffs_Object *in);
++
++static yaffs_BlockInfo *yaffs_GetBlockInfo(yaffs_Device *dev, int blockNo);
+ 
+-static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev,
+-				  int chunkInNAND);
+ 
+-static int yaffs_UnlinkWorker(yaffs_Object * obj);
+-static void yaffs_DestroyObject(yaffs_Object * obj);
++static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev,
++				int chunkInNAND);
+ 
+-static int yaffs_TagsMatch(const yaffs_ExtendedTags * tags, int objectId,
+-			   int chunkInObject);
++static int yaffs_UnlinkWorker(yaffs_Object *obj);
+ 
+-loff_t yaffs_GetFileSize(yaffs_Object * obj);
++static int yaffs_TagsMatch(const yaffs_ExtendedTags *tags, int objectId,
++			int chunkInObject);
+ 
+-static int yaffs_AllocateChunk(yaffs_Device * dev, int useReserve, yaffs_BlockInfo **blockUsedPtr);
++static int yaffs_AllocateChunk(yaffs_Device *dev, int useReserve,
++				yaffs_BlockInfo **blockUsedPtr);
+ 
+-static void yaffs_VerifyFreeChunks(yaffs_Device * dev);
++static void yaffs_VerifyFreeChunks(yaffs_Device *dev);
+ 
+ static void yaffs_CheckObjectDetailsLoaded(yaffs_Object *in);
+ 
++static void yaffs_VerifyDirectory(yaffs_Object *directory);
+ #ifdef YAFFS_PARANOID
+-static int yaffs_CheckFileSanity(yaffs_Object * in);
++static int yaffs_CheckFileSanity(yaffs_Object *in);
+ #else
+ #define yaffs_CheckFileSanity(in)
+ #endif
+ 
+-static void yaffs_InvalidateWholeChunkCache(yaffs_Object * in);
+-static void yaffs_InvalidateChunkCache(yaffs_Object * object, int chunkId);
++static void yaffs_InvalidateWholeChunkCache(yaffs_Object *in);
++static void yaffs_InvalidateChunkCache(yaffs_Object *object, int chunkId);
+ 
+ static void yaffs_InvalidateCheckpoint(yaffs_Device *dev);
+ 
+-static int yaffs_FindChunkInFile(yaffs_Object * in, int chunkInInode,
+-				 yaffs_ExtendedTags * tags);
++static int yaffs_FindChunkInFile(yaffs_Object *in, int chunkInInode,
++				yaffs_ExtendedTags *tags);
+ 
+-static __u32 yaffs_GetChunkGroupBase(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos);
+-static yaffs_Tnode *yaffs_FindLevel0Tnode(yaffs_Device * dev,
+-					  yaffs_FileStructure * fStruct,
+-					  __u32 chunkId);
++static __u32 yaffs_GetChunkGroupBase(yaffs_Device *dev, yaffs_Tnode *tn,
++		unsigned pos);
++static yaffs_Tnode *yaffs_FindLevel0Tnode(yaffs_Device *dev,
++					yaffs_FileStructure *fStruct,
++					__u32 chunkId);
+ 
+ 
+ /* Function to calculate chunk and offset */
+ 
+-static void yaffs_AddrToChunk(yaffs_Device *dev, loff_t addr, __u32 *chunk, __u32 *offset)
++static void yaffs_AddrToChunk(yaffs_Device *dev, loff_t addr, int *chunkOut,
++		__u32 *offsetOut)
+ {
+-	if(dev->chunkShift){
+-		/* Easy-peasy power of 2 case */
+-		*chunk  = (__u32)(addr >> dev->chunkShift);
+-		*offset = (__u32)(addr & dev->chunkMask);
+-	}
+-	else if(dev->crumbsPerChunk)
+-	{
+-		/* Case where we're using "crumbs" */
+-		*offset = (__u32)(addr & dev->crumbMask);
+-		addr >>= dev->crumbShift;
+-		*chunk = ((__u32)addr)/dev->crumbsPerChunk;
+-		*offset += ((addr - (*chunk * dev->crumbsPerChunk)) << dev->crumbShift);
++	int chunk;
++	__u32 offset;
++
++	chunk  = (__u32)(addr >> dev->chunkShift);
++
++	if (dev->chunkDiv == 1) {
++		/* easy power of 2 case */
++		offset = (__u32)(addr & dev->chunkMask);
++	} else {
++		/* Non power-of-2 case */
++
++		loff_t chunkBase;
++
++		chunk /= dev->chunkDiv;
++
++		chunkBase = ((loff_t)chunk) * dev->nDataBytesPerChunk;
++		offset = (__u32)(addr - chunkBase);
+ 	}
+-	else
+-		YBUG();
++
++	*chunkOut = chunk;
++	*offsetOut = offset;
+ }
+ 
+-/* Function to return the number of shifts for a power of 2 greater than or equal
+- * to the given number
++/* Function to return the number of shifts for a power of 2 greater than or
++ * equal to the given number
+  * Note we don't try to cater for all possible numbers and this does not have to
+  * be hellishly efficient.
+  */
+@@ -153,13 +154,14 @@ static __u32 ShiftsGE(__u32 x)
+ 
+ 	nShifts = extraBits = 0;
+ 
+-	while(x>1){
+-		if(x & 1) extraBits++;
+-		x>>=1;
++	while (x > 1) {
++		if (x & 1)
++			extraBits++;
++		x >>= 1;
+ 		nShifts++;
+ 	}
+ 
+-	if(extraBits)
++	if (extraBits)
+ 		nShifts++;
+ 
+ 	return nShifts;
+@@ -168,16 +170,17 @@ static __u32 ShiftsGE(__u32 x)
+ /* Function to return the number of shifts to get a 1 in bit 0
+  */
+ 
+-static __u32 ShiftDiv(__u32 x)
++static __u32 Shifts(__u32 x)
+ {
+ 	int nShifts;
+ 
+ 	nShifts =  0;
+ 
+-	if(!x) return 0;
++	if (!x)
++		return 0;
+ 
+-	while( !(x&1)){
+-		x>>=1;
++	while (!(x&1)) {
++		x >>= 1;
+ 		nShifts++;
+ 	}
+ 
+@@ -195,21 +198,25 @@ static int yaffs_InitialiseTempBuffers(y
+ 	int i;
+ 	__u8 *buf = (__u8 *)1;
+ 
+-	memset(dev->tempBuffer,0,sizeof(dev->tempBuffer));
++	memset(dev->tempBuffer, 0, sizeof(dev->tempBuffer));
+ 
+ 	for (i = 0; buf && i < YAFFS_N_TEMP_BUFFERS; i++) {
+ 		dev->tempBuffer[i].line = 0;	/* not in use */
+ 		dev->tempBuffer[i].buffer = buf =
+-		    YMALLOC_DMA(dev->nDataBytesPerChunk);
++		    YMALLOC_DMA(dev->totalBytesPerChunk);
+ 	}
+ 
+ 	return buf ? YAFFS_OK : YAFFS_FAIL;
+-
+ }
+ 
+-static __u8 *yaffs_GetTempBuffer(yaffs_Device * dev, int lineNo)
++__u8 *yaffs_GetTempBuffer(yaffs_Device *dev, int lineNo)
+ {
+ 	int i, j;
++
++	dev->tempInUse++;
++	if (dev->tempInUse > dev->maxTemp)
++		dev->maxTemp = dev->tempInUse;
++
+ 	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
+ 		if (dev->tempBuffer[i].line == 0) {
+ 			dev->tempBuffer[i].line = lineNo;
+@@ -227,9 +234,9 @@ static __u8 *yaffs_GetTempBuffer(yaffs_D
+ 	T(YAFFS_TRACE_BUFFERS,
+ 	  (TSTR("Out of temp buffers at line %d, other held by lines:"),
+ 	   lineNo));
+-	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
++	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++)
+ 		T(YAFFS_TRACE_BUFFERS, (TSTR(" %d "), dev->tempBuffer[i].line));
+-	}
++
+ 	T(YAFFS_TRACE_BUFFERS, (TSTR(" " TENDSTR)));
+ 
+ 	/*
+@@ -242,10 +249,13 @@ static __u8 *yaffs_GetTempBuffer(yaffs_D
+ 
+ }
+ 
+-static void yaffs_ReleaseTempBuffer(yaffs_Device * dev, __u8 * buffer,
++void yaffs_ReleaseTempBuffer(yaffs_Device *dev, __u8 *buffer,
+ 				    int lineNo)
+ {
+ 	int i;
++
++	dev->tempInUse--;
++
+ 	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
+ 		if (dev->tempBuffer[i].buffer == buffer) {
+ 			dev->tempBuffer[i].line = 0;
+@@ -267,27 +277,26 @@ static void yaffs_ReleaseTempBuffer(yaff
+ /*
+  * Determine if we have a managed buffer.
+  */
+-int yaffs_IsManagedTempBuffer(yaffs_Device * dev, const __u8 * buffer)
++int yaffs_IsManagedTempBuffer(yaffs_Device *dev, const __u8 *buffer)
+ {
+ 	int i;
++
+ 	for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
+ 		if (dev->tempBuffer[i].buffer == buffer)
+ 			return 1;
++	}
+ 
++	for (i = 0; i < dev->nShortOpCaches; i++) {
++		if (dev->srCache[i].data == buffer)
++			return 1;
+ 	}
+ 
+-    for (i = 0; i < dev->nShortOpCaches; i++) {
+-        if( dev->srCache[i].data == buffer )
+-            return 1;
+-
+-    }
+-
+-    if (buffer == dev->checkpointBuffer)
+-      return 1;
+-
+-    T(YAFFS_TRACE_ALWAYS,
+-	  (TSTR("yaffs: unmaged buffer detected.\n" TENDSTR)));
+-    return 0;
++	if (buffer == dev->checkpointBuffer)
++		return 1;
++
++	T(YAFFS_TRACE_ALWAYS,
++		(TSTR("yaffs: unmaged buffer detected.\n" TENDSTR)));
++	return 0;
+ }
+ 
+ 
+@@ -296,62 +305,63 @@ int yaffs_IsManagedTempBuffer(yaffs_Devi
+  * Chunk bitmap manipulations
+  */
+ 
+-static Y_INLINE __u8 *yaffs_BlockBits(yaffs_Device * dev, int blk)
++static Y_INLINE __u8 *yaffs_BlockBits(yaffs_Device *dev, int blk)
+ {
+ 	if (blk < dev->internalStartBlock || blk > dev->internalEndBlock) {
+ 		T(YAFFS_TRACE_ERROR,
+-		  (TSTR("**>> yaffs: BlockBits block %d is not valid" TENDSTR),
+-		   blk));
++			(TSTR("**>> yaffs: BlockBits block %d is not valid" TENDSTR),
++			blk));
+ 		YBUG();
+ 	}
+ 	return dev->chunkBits +
+-	    (dev->chunkBitmapStride * (blk - dev->internalStartBlock));
++		(dev->chunkBitmapStride * (blk - dev->internalStartBlock));
+ }
+ 
+ static Y_INLINE void yaffs_VerifyChunkBitId(yaffs_Device *dev, int blk, int chunk)
+ {
+-	if(blk < dev->internalStartBlock || blk > dev->internalEndBlock ||
+-	   chunk < 0 || chunk >= dev->nChunksPerBlock) {
+-	   T(YAFFS_TRACE_ERROR,
+-	    (TSTR("**>> yaffs: Chunk Id (%d:%d) invalid"TENDSTR),blk,chunk));
+-	    YBUG();
++	if (blk < dev->internalStartBlock || blk > dev->internalEndBlock ||
++			chunk < 0 || chunk >= dev->nChunksPerBlock) {
++		T(YAFFS_TRACE_ERROR,
++		(TSTR("**>> yaffs: Chunk Id (%d:%d) invalid"TENDSTR),
++			blk, chunk));
++		YBUG();
+ 	}
+ }
+ 
+-static Y_INLINE void yaffs_ClearChunkBits(yaffs_Device * dev, int blk)
++static Y_INLINE void yaffs_ClearChunkBits(yaffs_Device *dev, int blk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+ 
+ 	memset(blkBits, 0, dev->chunkBitmapStride);
+ }
+ 
+-static Y_INLINE void yaffs_ClearChunkBit(yaffs_Device * dev, int blk, int chunk)
++static Y_INLINE void yaffs_ClearChunkBit(yaffs_Device *dev, int blk, int chunk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+ 
+-	yaffs_VerifyChunkBitId(dev,blk,chunk);
++	yaffs_VerifyChunkBitId(dev, blk, chunk);
+ 
+ 	blkBits[chunk / 8] &= ~(1 << (chunk & 7));
+ }
+ 
+-static Y_INLINE void yaffs_SetChunkBit(yaffs_Device * dev, int blk, int chunk)
++static Y_INLINE void yaffs_SetChunkBit(yaffs_Device *dev, int blk, int chunk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+ 
+-	yaffs_VerifyChunkBitId(dev,blk,chunk);
++	yaffs_VerifyChunkBitId(dev, blk, chunk);
+ 
+ 	blkBits[chunk / 8] |= (1 << (chunk & 7));
+ }
+ 
+-static Y_INLINE int yaffs_CheckChunkBit(yaffs_Device * dev, int blk, int chunk)
++static Y_INLINE int yaffs_CheckChunkBit(yaffs_Device *dev, int blk, int chunk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+-	yaffs_VerifyChunkBitId(dev,blk,chunk);
++	yaffs_VerifyChunkBitId(dev, blk, chunk);
+ 
+ 	return (blkBits[chunk / 8] & (1 << (chunk & 7))) ? 1 : 0;
+ }
+ 
+-static Y_INLINE int yaffs_StillSomeChunkBits(yaffs_Device * dev, int blk)
++static Y_INLINE int yaffs_StillSomeChunkBits(yaffs_Device *dev, int blk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+ 	int i;
+@@ -363,17 +373,17 @@ static Y_INLINE int yaffs_StillSomeChunk
+ 	return 0;
+ }
+ 
+-static int yaffs_CountChunkBits(yaffs_Device * dev, int blk)
++static int yaffs_CountChunkBits(yaffs_Device *dev, int blk)
+ {
+ 	__u8 *blkBits = yaffs_BlockBits(dev, blk);
+ 	int i;
+ 	int n = 0;
+ 	for (i = 0; i < dev->chunkBitmapStride; i++) {
+ 		__u8 x = *blkBits;
+-		while(x){
+-			if(x & 1)
++		while (x) {
++			if (x & 1)
+ 				n++;
+-			x >>=1;
++			x >>= 1;
+ 		}
+ 
+ 		blkBits++;
+@@ -400,7 +410,7 @@ static int yaffs_SkipNANDVerification(ya
+ 	return !(yaffs_traceMask & (YAFFS_TRACE_VERIFY_NAND));
+ }
+ 
+-static const char * blockStateName[] = {
++static const char *blockStateName[] = {
+ "Unknown",
+ "Needs scanning",
+ "Scanning",
+@@ -413,64 +423,65 @@ static const char * blockStateName[] = {
+ "Dead"
+ };
+ 
+-static void yaffs_VerifyBlock(yaffs_Device *dev,yaffs_BlockInfo *bi,int n)
++static void yaffs_VerifyBlock(yaffs_Device *dev, yaffs_BlockInfo *bi, int n)
+ {
+ 	int actuallyUsed;
+ 	int inUse;
+ 
+-	if(yaffs_SkipVerification(dev))
++	if (yaffs_SkipVerification(dev))
+ 		return;
+ 
+ 	/* Report illegal runtime states */
+-	if(bi->blockState <0 || bi->blockState >= YAFFS_NUMBER_OF_BLOCK_STATES)
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has undefined state %d"TENDSTR),n,bi->blockState));
++	if (bi->blockState >= YAFFS_NUMBER_OF_BLOCK_STATES)
++		T(YAFFS_TRACE_VERIFY, (TSTR("Block %d has undefined state %d"TENDSTR), n, bi->blockState));
+ 
+-	switch(bi->blockState){
+-	 case YAFFS_BLOCK_STATE_UNKNOWN:
+-	 case YAFFS_BLOCK_STATE_SCANNING:
+-	 case YAFFS_BLOCK_STATE_NEEDS_SCANNING:
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has bad run-state %s"TENDSTR),
+-		n,blockStateName[bi->blockState]));
++	switch (bi->blockState) {
++	case YAFFS_BLOCK_STATE_UNKNOWN:
++	case YAFFS_BLOCK_STATE_SCANNING:
++	case YAFFS_BLOCK_STATE_NEEDS_SCANNING:
++		T(YAFFS_TRACE_VERIFY, (TSTR("Block %d has bad run-state %s"TENDSTR),
++		n, blockStateName[bi->blockState]));
+ 	}
+ 
+ 	/* Check pages in use and soft deletions are legal */
+ 
+ 	actuallyUsed = bi->pagesInUse - bi->softDeletions;
+ 
+-	if(bi->pagesInUse < 0 || bi->pagesInUse > dev->nChunksPerBlock ||
++	if (bi->pagesInUse < 0 || bi->pagesInUse > dev->nChunksPerBlock ||
+ 	   bi->softDeletions < 0 || bi->softDeletions > dev->nChunksPerBlock ||
+ 	   actuallyUsed < 0 || actuallyUsed > dev->nChunksPerBlock)
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has illegal values pagesInUsed %d softDeletions %d"TENDSTR),
+-		n,bi->pagesInUse,bi->softDeletions));
++		T(YAFFS_TRACE_VERIFY, (TSTR("Block %d has illegal values pagesInUsed %d softDeletions %d"TENDSTR),
++		n, bi->pagesInUse, bi->softDeletions));
+ 
+ 
+ 	/* Check chunk bitmap legal */
+-	inUse = yaffs_CountChunkBits(dev,n);
+-	if(inUse != bi->pagesInUse)
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has inconsistent values pagesInUse %d counted chunk bits %d"TENDSTR),
+-			n,bi->pagesInUse,inUse));
++	inUse = yaffs_CountChunkBits(dev, n);
++	if (inUse != bi->pagesInUse)
++		T(YAFFS_TRACE_VERIFY, (TSTR("Block %d has inconsistent values pagesInUse %d counted chunk bits %d"TENDSTR),
++			n, bi->pagesInUse, inUse));
+ 
+ 	/* Check that the sequence number is valid.
+ 	 * Ten million is legal, but is very unlikely
+ 	 */
+-	if(dev->isYaffs2 &&
++	if (dev->isYaffs2 &&
+ 	   (bi->blockState == YAFFS_BLOCK_STATE_ALLOCATING || bi->blockState == YAFFS_BLOCK_STATE_FULL) &&
+-	   (bi->sequenceNumber < YAFFS_LOWEST_SEQUENCE_NUMBER || bi->sequenceNumber > 10000000 ))
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Block %d has suspect sequence number of %d"TENDSTR),
+-		n,bi->sequenceNumber));
+-
++	   (bi->sequenceNumber < YAFFS_LOWEST_SEQUENCE_NUMBER || bi->sequenceNumber > 10000000))
++		T(YAFFS_TRACE_VERIFY, (TSTR("Block %d has suspect sequence number of %d"TENDSTR),
++		n, bi->sequenceNumber));
+ }
+ 
+-static void yaffs_VerifyCollectedBlock(yaffs_Device *dev,yaffs_BlockInfo *bi,int n)
++static void yaffs_VerifyCollectedBlock(yaffs_Device *dev, yaffs_BlockInfo *bi,
++		int n)
+ {
+-	yaffs_VerifyBlock(dev,bi,n);
++	yaffs_VerifyBlock(dev, bi, n);
+ 
+ 	/* After collection the block should be in the erased state */
+-	/* TODO: This will need to change if we do partial gc */
++	/* This will need to change if we do partial gc */
+ 
+-	if(bi->blockState != YAFFS_BLOCK_STATE_EMPTY){
+-		T(YAFFS_TRACE_ERROR,(TSTR("Block %d is in state %d after gc, should be erased"TENDSTR),
+-			n,bi->blockState));
++	if (bi->blockState != YAFFS_BLOCK_STATE_COLLECTING &&
++			bi->blockState != YAFFS_BLOCK_STATE_EMPTY) {
++		T(YAFFS_TRACE_ERROR, (TSTR("Block %d is in state %d after gc, should be erased"TENDSTR),
++			n, bi->blockState));
+ 	}
+ }
+ 
+@@ -480,52 +491,49 @@ static void yaffs_VerifyBlocks(yaffs_Dev
+ 	int nBlocksPerState[YAFFS_NUMBER_OF_BLOCK_STATES];
+ 	int nIllegalBlockStates = 0;
+ 
+-
+-	if(yaffs_SkipVerification(dev))
++	if (yaffs_SkipVerification(dev))
+ 		return;
+ 
+-	memset(nBlocksPerState,0,sizeof(nBlocksPerState));
+-
++	memset(nBlocksPerState, 0, sizeof(nBlocksPerState));
+ 
+-	for(i = dev->internalStartBlock; i <= dev->internalEndBlock; i++){
+-		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev,i);
+-		yaffs_VerifyBlock(dev,bi,i);
++	for (i = dev->internalStartBlock; i <= dev->internalEndBlock; i++) {
++		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, i);
++		yaffs_VerifyBlock(dev, bi, i);
+ 
+-		if(bi->blockState >=0 && bi->blockState < YAFFS_NUMBER_OF_BLOCK_STATES)
++		if (bi->blockState < YAFFS_NUMBER_OF_BLOCK_STATES)
+ 			nBlocksPerState[bi->blockState]++;
+ 		else
+ 			nIllegalBlockStates++;
+-
+ 	}
+ 
+-	T(YAFFS_TRACE_VERIFY,(TSTR(""TENDSTR)));
+-	T(YAFFS_TRACE_VERIFY,(TSTR("Block summary"TENDSTR)));
++	T(YAFFS_TRACE_VERIFY, (TSTR(""TENDSTR)));
++	T(YAFFS_TRACE_VERIFY, (TSTR("Block summary"TENDSTR)));
+ 
+-	T(YAFFS_TRACE_VERIFY,(TSTR("%d blocks have illegal states"TENDSTR),nIllegalBlockStates));
+-	if(nBlocksPerState[YAFFS_BLOCK_STATE_ALLOCATING] > 1)
+-		T(YAFFS_TRACE_VERIFY,(TSTR("Too many allocating blocks"TENDSTR)));
++	T(YAFFS_TRACE_VERIFY, (TSTR("%d blocks have illegal states"TENDSTR), nIllegalBlockStates));
++	if (nBlocksPerState[YAFFS_BLOCK_STATE_ALLOCATING] > 1)
++		T(YAFFS_TRACE_VERIFY, (TSTR("Too many allocating blocks"TENDSTR)));
+ 
+-	for(i = 0; i < YAFFS_NUMBER_OF_BLOCK_STATES; i++)
++	for (i = 0; i < YAFFS_NUMBER_OF_BLOCK_STATES; i++)
+ 		T(YAFFS_TRACE_VERIFY,
+ 		  (TSTR("%s %d blocks"TENDSTR),
+-		  blockStateName[i],nBlocksPerState[i]));
++		  blockStateName[i], nBlocksPerState[i]));
+ 
+-	if(dev->blocksInCheckpoint != nBlocksPerState[YAFFS_BLOCK_STATE_CHECKPOINT])
++	if (dev->blocksInCheckpoint != nBlocksPerState[YAFFS_BLOCK_STATE_CHECKPOINT])
+ 		T(YAFFS_TRACE_VERIFY,
+ 		 (TSTR("Checkpoint block count wrong dev %d count %d"TENDSTR),
+ 		 dev->blocksInCheckpoint, nBlocksPerState[YAFFS_BLOCK_STATE_CHECKPOINT]));
+ 
+-	if(dev->nErasedBlocks != nBlocksPerState[YAFFS_BLOCK_STATE_EMPTY])
++	if (dev->nErasedBlocks != nBlocksPerState[YAFFS_BLOCK_STATE_EMPTY])
+ 		T(YAFFS_TRACE_VERIFY,
+ 		 (TSTR("Erased block count wrong dev %d count %d"TENDSTR),
+ 		 dev->nErasedBlocks, nBlocksPerState[YAFFS_BLOCK_STATE_EMPTY]));
+ 
+-	if(nBlocksPerState[YAFFS_BLOCK_STATE_COLLECTING] > 1)
++	if (nBlocksPerState[YAFFS_BLOCK_STATE_COLLECTING] > 1)
+ 		T(YAFFS_TRACE_VERIFY,
+ 		 (TSTR("Too many collecting blocks %d (max is 1)"TENDSTR),
+ 		 nBlocksPerState[YAFFS_BLOCK_STATE_COLLECTING]));
+ 
+-	T(YAFFS_TRACE_VERIFY,(TSTR(""TENDSTR)));
++	T(YAFFS_TRACE_VERIFY, (TSTR(""TENDSTR)));
+ 
+ }
+ 
+@@ -535,26 +543,26 @@ static void yaffs_VerifyBlocks(yaffs_Dev
+  */
+ static void yaffs_VerifyObjectHeader(yaffs_Object *obj, yaffs_ObjectHeader *oh, yaffs_ExtendedTags *tags, int parentCheck)
+ {
+-	if(yaffs_SkipVerification(obj->myDev))
++	if (obj && yaffs_SkipVerification(obj->myDev))
+ 		return;
+ 
+-	if(!(tags && obj && oh)){
+-	 	T(YAFFS_TRACE_VERIFY,
+-		 		(TSTR("Verifying object header tags %x obj %x oh %x"TENDSTR),
+-		 		(__u32)tags,(__u32)obj,(__u32)oh));
++	if (!(tags && obj && oh)) {
++		T(YAFFS_TRACE_VERIFY,
++				(TSTR("Verifying object header tags %x obj %x oh %x"TENDSTR),
++				(__u32)tags, (__u32)obj, (__u32)oh));
+ 		return;
+ 	}
+ 
+-	if(oh->type <= YAFFS_OBJECT_TYPE_UNKNOWN ||
+-	   oh->type > YAFFS_OBJECT_TYPE_MAX)
+-	 	T(YAFFS_TRACE_VERIFY,
+-		 (TSTR("Obj %d header type is illegal value 0x%x"TENDSTR),
+-		 tags->objectId, oh->type));
+-
+-	if(tags->objectId != obj->objectId)
+-	 	T(YAFFS_TRACE_VERIFY,
+-		 (TSTR("Obj %d header mismatch objectId %d"TENDSTR),
+-		 tags->objectId, obj->objectId));
++	if (oh->type <= YAFFS_OBJECT_TYPE_UNKNOWN ||
++			oh->type > YAFFS_OBJECT_TYPE_MAX)
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d header type is illegal value 0x%x"TENDSTR),
++			tags->objectId, oh->type));
++
++	if (tags->objectId != obj->objectId)
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d header mismatch objectId %d"TENDSTR),
++			tags->objectId, obj->objectId));
+ 
+ 
+ 	/*
+@@ -563,46 +571,43 @@ static void yaffs_VerifyObjectHeader(yaf
+ 	 * Tests do not apply to the root object.
+ 	 */
+ 
+-	if(parentCheck && tags->objectId > 1 && !obj->parent)
+-	 	T(YAFFS_TRACE_VERIFY,
+-		 (TSTR("Obj %d header mismatch parentId %d obj->parent is NULL"TENDSTR),
+-	 	 tags->objectId, oh->parentObjectId));
+-
+-
+-	if(parentCheck && obj->parent &&
+-	   oh->parentObjectId != obj->parent->objectId &&
+-	   (oh->parentObjectId != YAFFS_OBJECTID_UNLINKED ||
+-	    obj->parent->objectId != YAFFS_OBJECTID_DELETED))
+-	 	T(YAFFS_TRACE_VERIFY,
+-		 (TSTR("Obj %d header mismatch parentId %d parentObjectId %d"TENDSTR),
+-	 	 tags->objectId, oh->parentObjectId, obj->parent->objectId));
++	if (parentCheck && tags->objectId > 1 && !obj->parent)
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d header mismatch parentId %d obj->parent is NULL"TENDSTR),
++			tags->objectId, oh->parentObjectId));
+ 
++	if (parentCheck && obj->parent &&
++			oh->parentObjectId != obj->parent->objectId &&
++			(oh->parentObjectId != YAFFS_OBJECTID_UNLINKED ||
++			obj->parent->objectId != YAFFS_OBJECTID_DELETED))
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d header mismatch parentId %d parentObjectId %d"TENDSTR),
++			tags->objectId, oh->parentObjectId, obj->parent->objectId));
+ 
+-	if(tags->objectId > 1 && oh->name[0] == 0) /* Null name */
++	if (tags->objectId > 1 && oh->name[0] == 0) /* Null name */
+ 		T(YAFFS_TRACE_VERIFY,
+-		(TSTR("Obj %d header name is NULL"TENDSTR),
+-		 obj->objectId));
++			(TSTR("Obj %d header name is NULL"TENDSTR),
++			obj->objectId));
+ 
+-	if(tags->objectId > 1 && ((__u8)(oh->name[0])) == 0xff) /* Trashed name */
++	if (tags->objectId > 1 && ((__u8)(oh->name[0])) == 0xff) /* Trashed name */
+ 		T(YAFFS_TRACE_VERIFY,
+-		(TSTR("Obj %d header name is 0xFF"TENDSTR),
+-		 obj->objectId));
++			(TSTR("Obj %d header name is 0xFF"TENDSTR),
++			obj->objectId));
+ }
+ 
+ 
+ 
+-static int yaffs_VerifyTnodeWorker(yaffs_Object * obj, yaffs_Tnode * tn,
+-				  	__u32 level, int chunkOffset)
++static int yaffs_VerifyTnodeWorker(yaffs_Object *obj, yaffs_Tnode *tn,
++					__u32 level, int chunkOffset)
+ {
+ 	int i;
+ 	yaffs_Device *dev = obj->myDev;
+ 	int ok = 1;
+-	int nTnodeBytes = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
+ 
+ 	if (tn) {
+ 		if (level > 0) {
+ 
+-			for (i = 0; i < YAFFS_NTNODES_INTERNAL && ok; i++){
++			for (i = 0; i < YAFFS_NTNODES_INTERNAL && ok; i++) {
+ 				if (tn->internal[i]) {
+ 					ok = yaffs_VerifyTnodeWorker(obj,
+ 							tn->internal[i],
+@@ -611,20 +616,19 @@ static int yaffs_VerifyTnodeWorker(yaffs
+ 				}
+ 			}
+ 		} else if (level == 0) {
+-			int i;
+ 			yaffs_ExtendedTags tags;
+ 			__u32 objectId = obj->objectId;
+ 
+ 			chunkOffset <<=  YAFFS_TNODES_LEVEL0_BITS;
+ 
+-			for(i = 0; i < YAFFS_NTNODES_LEVEL0; i++){
+-				__u32 theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
++			for (i = 0; i < YAFFS_NTNODES_LEVEL0; i++) {
++				__u32 theChunk = yaffs_GetChunkGroupBase(dev, tn, i);
+ 
+-				if(theChunk > 0){
++				if (theChunk > 0) {
+ 					/* T(~0,(TSTR("verifying (%d:%d) %d"TENDSTR),tags.objectId,tags.chunkId,theChunk)); */
+-					yaffs_ReadChunkWithTagsFromNAND(dev,theChunk,NULL, &tags);
+-					if(tags.objectId != objectId || tags.chunkId != chunkOffset){
+-						T(~0,(TSTR("Object %d chunkId %d NAND mismatch chunk %d tags (%d:%d)"TENDSTR),
++					yaffs_ReadChunkWithTagsFromNAND(dev, theChunk, NULL, &tags);
++					if (tags.objectId != objectId || tags.chunkId != chunkOffset) {
++						T(~0, (TSTR("Object %d chunkId %d NAND mismatch chunk %d tags (%d:%d)"TENDSTR),
+ 							objectId, chunkOffset, theChunk,
+ 							tags.objectId, tags.chunkId));
+ 					}
+@@ -646,13 +650,15 @@ static void yaffs_VerifyFile(yaffs_Objec
+ 	__u32 lastChunk;
+ 	__u32 x;
+ 	__u32 i;
+-	int ok;
+ 	yaffs_Device *dev;
+ 	yaffs_ExtendedTags tags;
+ 	yaffs_Tnode *tn;
+ 	__u32 objectId;
+ 
+-	if(obj && yaffs_SkipVerification(obj->myDev))
++	if (!obj)
++		return;
++
++	if (yaffs_SkipVerification(obj->myDev))
+ 		return;
+ 
+ 	dev = obj->myDev;
+@@ -662,17 +668,17 @@ static void yaffs_VerifyFile(yaffs_Objec
+ 	lastChunk =  obj->variant.fileVariant.fileSize / dev->nDataBytesPerChunk + 1;
+ 	x = lastChunk >> YAFFS_TNODES_LEVEL0_BITS;
+ 	requiredTallness = 0;
+-	while (x> 0) {
++	while (x > 0) {
+ 		x >>= YAFFS_TNODES_INTERNAL_BITS;
+ 		requiredTallness++;
+ 	}
+ 
+ 	actualTallness = obj->variant.fileVariant.topLevel;
+ 
+-	if(requiredTallness > actualTallness )
++	if (requiredTallness > actualTallness)
+ 		T(YAFFS_TRACE_VERIFY,
+ 		(TSTR("Obj %d had tnode tallness %d, needs to be %d"TENDSTR),
+-		 obj->objectId,actualTallness, requiredTallness));
++		 obj->objectId, actualTallness, requiredTallness));
+ 
+ 
+ 	/* Check that the chunks in the tnode tree are all correct.
+@@ -680,39 +686,31 @@ static void yaffs_VerifyFile(yaffs_Objec
+ 	 * checking the tags for every chunk match.
+ 	 */
+ 
+-	if(yaffs_SkipNANDVerification(dev))
++	if (yaffs_SkipNANDVerification(dev))
+ 		return;
+ 
+-	for(i = 1; i <= lastChunk; i++){
+-		tn = yaffs_FindLevel0Tnode(dev, &obj->variant.fileVariant,i);
++	for (i = 1; i <= lastChunk; i++) {
++		tn = yaffs_FindLevel0Tnode(dev, &obj->variant.fileVariant, i);
+ 
+ 		if (tn) {
+-			__u32 theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
+-			if(theChunk > 0){
++			__u32 theChunk = yaffs_GetChunkGroupBase(dev, tn, i);
++			if (theChunk > 0) {
+ 				/* T(~0,(TSTR("verifying (%d:%d) %d"TENDSTR),objectId,i,theChunk)); */
+-				yaffs_ReadChunkWithTagsFromNAND(dev,theChunk,NULL, &tags);
+-				if(tags.objectId != objectId || tags.chunkId != i){
+-					T(~0,(TSTR("Object %d chunkId %d NAND mismatch chunk %d tags (%d:%d)"TENDSTR),
++				yaffs_ReadChunkWithTagsFromNAND(dev, theChunk, NULL, &tags);
++				if (tags.objectId != objectId || tags.chunkId != i) {
++					T(~0, (TSTR("Object %d chunkId %d NAND mismatch chunk %d tags (%d:%d)"TENDSTR),
+ 						objectId, i, theChunk,
+ 						tags.objectId, tags.chunkId));
+ 				}
+ 			}
+ 		}
+-
+ 	}
+-
+ }
+ 
+-static void yaffs_VerifyDirectory(yaffs_Object *obj)
+-{
+-	if(obj && yaffs_SkipVerification(obj->myDev))
+-		return;
+-
+-}
+ 
+ static void yaffs_VerifyHardLink(yaffs_Object *obj)
+ {
+-	if(obj && yaffs_SkipVerification(obj->myDev))
++	if (obj && yaffs_SkipVerification(obj->myDev))
+ 		return;
+ 
+ 	/* Verify sane equivalent object */
+@@ -720,7 +718,7 @@ static void yaffs_VerifyHardLink(yaffs_O
+ 
+ static void yaffs_VerifySymlink(yaffs_Object *obj)
+ {
+-	if(obj && yaffs_SkipVerification(obj->myDev))
++	if (obj && yaffs_SkipVerification(obj->myDev))
+ 		return;
+ 
+ 	/* Verify symlink string */
+@@ -728,7 +726,7 @@ static void yaffs_VerifySymlink(yaffs_Ob
+ 
+ static void yaffs_VerifySpecial(yaffs_Object *obj)
+ {
+-	if(obj && yaffs_SkipVerification(obj->myDev))
++	if (obj && yaffs_SkipVerification(obj->myDev))
+ 		return;
+ }
+ 
+@@ -740,14 +738,19 @@ static void yaffs_VerifyObject(yaffs_Obj
+ 	__u32 chunkMax;
+ 
+ 	__u32 chunkIdOk;
+-	__u32 chunkIsLive;
++	__u32 chunkInRange;
++	__u32 chunkShouldNotBeDeleted;
++	__u32 chunkValid;
++
++	if (!obj)
++		return;
+ 
+-	if(!obj)
++	if (obj->beingCreated)
+ 		return;
+ 
+ 	dev = obj->myDev;
+ 
+-	if(yaffs_SkipVerification(dev))
++	if (yaffs_SkipVerification(dev))
+ 		return;
+ 
+ 	/* Check sane object header chunk */
+@@ -755,50 +758,54 @@ static void yaffs_VerifyObject(yaffs_Obj
+ 	chunkMin = dev->internalStartBlock * dev->nChunksPerBlock;
+ 	chunkMax = (dev->internalEndBlock+1) * dev->nChunksPerBlock - 1;
+ 
+-	chunkIdOk = (obj->chunkId >= chunkMin && obj->chunkId <= chunkMax);
+-	chunkIsLive = chunkIdOk &&
++	chunkInRange = (((unsigned)(obj->hdrChunk)) >= chunkMin && ((unsigned)(obj->hdrChunk)) <= chunkMax);
++	chunkIdOk = chunkInRange || obj->hdrChunk == 0;
++	chunkValid = chunkInRange &&
+ 			yaffs_CheckChunkBit(dev,
+-					    obj->chunkId / dev->nChunksPerBlock,
+-					    obj->chunkId % dev->nChunksPerBlock);
+-	if(!obj->fake &&
+-	    (!chunkIdOk || !chunkIsLive)) {
+-	   T(YAFFS_TRACE_VERIFY,
+-	   (TSTR("Obj %d has chunkId %d %s %s"TENDSTR),
+-	   obj->objectId,obj->chunkId,
+-	   chunkIdOk ? "" : ",out of range",
+-	   chunkIsLive || !chunkIdOk ? "" : ",marked as deleted"));
++					obj->hdrChunk / dev->nChunksPerBlock,
++					obj->hdrChunk % dev->nChunksPerBlock);
++	chunkShouldNotBeDeleted = chunkInRange && !chunkValid;
++
++	if (!obj->fake &&
++			(!chunkIdOk || chunkShouldNotBeDeleted)) {
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d has chunkId %d %s %s"TENDSTR),
++			obj->objectId, obj->hdrChunk,
++			chunkIdOk ? "" : ",out of range",
++			chunkShouldNotBeDeleted ? ",marked as deleted" : ""));
+ 	}
+ 
+-	if(chunkIdOk && chunkIsLive &&!yaffs_SkipNANDVerification(dev)) {
++	if (chunkValid && !yaffs_SkipNANDVerification(dev)) {
+ 		yaffs_ExtendedTags tags;
+ 		yaffs_ObjectHeader *oh;
+-		__u8 *buffer = yaffs_GetTempBuffer(dev,__LINE__);
++		__u8 *buffer = yaffs_GetTempBuffer(dev, __LINE__);
+ 
+ 		oh = (yaffs_ObjectHeader *)buffer;
+ 
+-		yaffs_ReadChunkWithTagsFromNAND(dev, obj->chunkId,buffer, &tags);
++		yaffs_ReadChunkWithTagsFromNAND(dev, obj->hdrChunk, buffer,
++				&tags);
+ 
+-		yaffs_VerifyObjectHeader(obj,oh,&tags,1);
++		yaffs_VerifyObjectHeader(obj, oh, &tags, 1);
+ 
+-		yaffs_ReleaseTempBuffer(dev,buffer,__LINE__);
++		yaffs_ReleaseTempBuffer(dev, buffer, __LINE__);
+ 	}
+ 
+ 	/* Verify it has a parent */
+-	if(obj && !obj->fake &&
+-	   (!obj->parent || obj->parent->myDev != dev)){
+-	   T(YAFFS_TRACE_VERIFY,
+-	   (TSTR("Obj %d has parent pointer %p which does not look like an object"TENDSTR),
+-	   obj->objectId,obj->parent));
++	if (obj && !obj->fake &&
++			(!obj->parent || obj->parent->myDev != dev)) {
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d has parent pointer %p which does not look like an object"TENDSTR),
++			obj->objectId, obj->parent));
+ 	}
+ 
+ 	/* Verify parent is a directory */
+-	if(obj->parent && obj->parent->variantType != YAFFS_OBJECT_TYPE_DIRECTORY){
+-	   T(YAFFS_TRACE_VERIFY,
+-	   (TSTR("Obj %d's parent is not a directory (type %d)"TENDSTR),
+-	   obj->objectId,obj->parent->variantType));
++	if (obj->parent && obj->parent->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
++		T(YAFFS_TRACE_VERIFY,
++			(TSTR("Obj %d's parent is not a directory (type %d)"TENDSTR),
++			obj->objectId, obj->parent->variantType));
+ 	}
+ 
+-	switch(obj->variantType){
++	switch (obj->variantType) {
+ 	case YAFFS_OBJECT_TYPE_FILE:
+ 		yaffs_VerifyFile(obj);
+ 		break;
+@@ -818,33 +825,30 @@ static void yaffs_VerifyObject(yaffs_Obj
+ 	default:
+ 		T(YAFFS_TRACE_VERIFY,
+ 		(TSTR("Obj %d has illegaltype %d"TENDSTR),
+-		obj->objectId,obj->variantType));
++		obj->objectId, obj->variantType));
+ 		break;
+ 	}
+-
+-
+ }
+ 
+ static void yaffs_VerifyObjects(yaffs_Device *dev)
+ {
+ 	yaffs_Object *obj;
+ 	int i;
+-	struct list_head *lh;
++	struct ylist_head *lh;
+ 
+-	if(yaffs_SkipVerification(dev))
++	if (yaffs_SkipVerification(dev))
+ 		return;
+ 
+ 	/* Iterate through the objects in each hash entry */
+ 
+-	 for(i = 0; i <  YAFFS_NOBJECT_BUCKETS; i++){
+-	 	list_for_each(lh, &dev->objectBucket[i].list) {
++	for (i = 0; i <  YAFFS_NOBJECT_BUCKETS; i++) {
++		ylist_for_each(lh, &dev->objectBucket[i].list) {
+ 			if (lh) {
+-				obj = list_entry(lh, yaffs_Object, hashLink);
++				obj = ylist_entry(lh, yaffs_Object, hashLink);
+ 				yaffs_VerifyObject(obj);
+ 			}
+ 		}
+-	 }
+-
++	}
+ }
+ 
+ 
+@@ -855,19 +859,20 @@ static void yaffs_VerifyObjects(yaffs_De
+ static Y_INLINE int yaffs_HashFunction(int n)
+ {
+ 	n = abs(n);
+-	return (n % YAFFS_NOBJECT_BUCKETS);
++	return n % YAFFS_NOBJECT_BUCKETS;
+ }
+ 
+ /*
+- * Access functions to useful fake objects
++ * Access functions to useful fake objects.
++ * Note that root might have a presence in NAND if permissions are set.
+  */
+ 
+-yaffs_Object *yaffs_Root(yaffs_Device * dev)
++yaffs_Object *yaffs_Root(yaffs_Device *dev)
+ {
+ 	return dev->rootDir;
+ }
+ 
+-yaffs_Object *yaffs_LostNFound(yaffs_Device * dev)
++yaffs_Object *yaffs_LostNFound(yaffs_Device *dev)
+ {
+ 	return dev->lostNFoundDir;
+ }
+@@ -877,7 +882,7 @@ yaffs_Object *yaffs_LostNFound(yaffs_Dev
+  *  Erased NAND checking functions
+  */
+ 
+-int yaffs_CheckFF(__u8 * buffer, int nBytes)
++int yaffs_CheckFF(__u8 *buffer, int nBytes)
+ {
+ 	/* Horrible, slow implementation */
+ 	while (nBytes--) {
+@@ -889,9 +894,8 @@ int yaffs_CheckFF(__u8 * buffer, int nBy
+ }
+ 
+ static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev,
+-				  int chunkInNAND)
++				int chunkInNAND)
+ {
+-
+ 	int retval = YAFFS_OK;
+ 	__u8 *data = yaffs_GetTempBuffer(dev, __LINE__);
+ 	yaffs_ExtendedTags tags;
+@@ -899,10 +903,9 @@ static int yaffs_CheckChunkErased(struct
+ 
+ 	result = yaffs_ReadChunkWithTagsFromNAND(dev, chunkInNAND, data, &tags);
+ 
+-	if(tags.eccResult > YAFFS_ECC_RESULT_NO_ERROR)
++	if (tags.eccResult > YAFFS_ECC_RESULT_NO_ERROR)
+ 		retval = YAFFS_FAIL;
+ 
+-
+ 	if (!yaffs_CheckFF(data, dev->nDataBytesPerChunk) || tags.chunkUsed) {
+ 		T(YAFFS_TRACE_NANDACCESS,
+ 		  (TSTR("Chunk %d not erased" TENDSTR), chunkInNAND));
+@@ -915,11 +918,10 @@ static int yaffs_CheckChunkErased(struct
+ 
+ }
+ 
+-
+ static int yaffs_WriteNewChunkWithTagsToNAND(struct yaffs_DeviceStruct *dev,
+-					     const __u8 * data,
+-					     yaffs_ExtendedTags * tags,
+-					     int useReserve)
++					const __u8 *data,
++					yaffs_ExtendedTags *tags,
++					int useReserve)
+ {
+ 	int attempts = 0;
+ 	int writeOk = 0;
+@@ -972,7 +974,7 @@ static int yaffs_WriteNewChunkWithTagsTo
+ 			erasedOk = yaffs_CheckChunkErased(dev, chunk);
+ 			if (erasedOk != YAFFS_OK) {
+ 				T(YAFFS_TRACE_ERROR,
+-				(TSTR ("**>> yaffs chunk %d was not erased"
++				(TSTR("**>> yaffs chunk %d was not erased"
+ 				TENDSTR), chunk));
+ 
+ 				/* try another chunk */
+@@ -992,7 +994,11 @@ static int yaffs_WriteNewChunkWithTagsTo
+ 		/* Copy the data into the robustification buffer */
+ 		yaffs_HandleWriteChunkOk(dev, chunk, data, tags);
+ 
+-	} while (writeOk != YAFFS_OK && attempts < yaffs_wr_attempts);
++	} while (writeOk != YAFFS_OK &&
++		(yaffs_wr_attempts <= 0 || attempts <= yaffs_wr_attempts));
++
++	if (!writeOk)
++		chunk = -1;
+ 
+ 	if (attempts > 1) {
+ 		T(YAFFS_TRACE_ERROR,
+@@ -1009,13 +1015,35 @@ static int yaffs_WriteNewChunkWithTagsTo
+  * Block retiring for handling a broken block.
+  */
+ 
+-static void yaffs_RetireBlock(yaffs_Device * dev, int blockInNAND)
++static void yaffs_RetireBlock(yaffs_Device *dev, int blockInNAND)
+ {
+ 	yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, blockInNAND);
+ 
+ 	yaffs_InvalidateCheckpoint(dev);
+ 
+-	yaffs_MarkBlockBad(dev, blockInNAND);
++	if (yaffs_MarkBlockBad(dev, blockInNAND) != YAFFS_OK) {
++		if (yaffs_EraseBlockInNAND(dev, blockInNAND) != YAFFS_OK) {
++			T(YAFFS_TRACE_ALWAYS, (TSTR(
++				"yaffs: Failed to mark bad and erase block %d"
++				TENDSTR), blockInNAND));
++		} else {
++			yaffs_ExtendedTags tags;
++			int chunkId = blockInNAND * dev->nChunksPerBlock;
++
++			__u8 *buffer = yaffs_GetTempBuffer(dev, __LINE__);
++
++			memset(buffer, 0xff, dev->nDataBytesPerChunk);
++			yaffs_InitialiseTags(&tags);
++			tags.sequenceNumber = YAFFS_SEQUENCE_BAD_BLOCK;
++			if (dev->writeChunkWithTagsToNAND(dev, chunkId -
++				dev->chunkOffset, buffer, &tags) != YAFFS_OK)
++				T(YAFFS_TRACE_ALWAYS, (TSTR("yaffs: Failed to "
++					TCONT("write bad block marker to block %d")
++					TENDSTR), blockInNAND));
++
++			yaffs_ReleaseTempBuffer(dev, buffer, __LINE__);
++		}
++	}
+ 
+ 	bi->blockState = YAFFS_BLOCK_STATE_DEAD;
+ 	bi->gcPrioritise = 0;
+@@ -1029,49 +1057,45 @@ static void yaffs_RetireBlock(yaffs_Devi
+  *
+  */
+ 
+-static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+-				     const __u8 * data,
+-				     const yaffs_ExtendedTags * tags)
++static void yaffs_HandleWriteChunkOk(yaffs_Device *dev, int chunkInNAND,
++				const __u8 *data,
++				const yaffs_ExtendedTags *tags)
+ {
+ }
+ 
+-static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+-				    const yaffs_ExtendedTags * tags)
++static void yaffs_HandleUpdateChunk(yaffs_Device *dev, int chunkInNAND,
++				const yaffs_ExtendedTags *tags)
+ {
+ }
+ 
+ void yaffs_HandleChunkError(yaffs_Device *dev, yaffs_BlockInfo *bi)
+ {
+-	if(!bi->gcPrioritise){
++	if (!bi->gcPrioritise) {
+ 		bi->gcPrioritise = 1;
+ 		dev->hasPendingPrioritisedGCs = 1;
+-		bi->chunkErrorStrikes ++;
++		bi->chunkErrorStrikes++;
+ 
+-		if(bi->chunkErrorStrikes > 3){
++		if (bi->chunkErrorStrikes > 3) {
+ 			bi->needsRetiring = 1; /* Too many stikes, so retire this */
+ 			T(YAFFS_TRACE_ALWAYS, (TSTR("yaffs: Block struck out" TENDSTR)));
+ 
+ 		}
+-
+ 	}
+ }
+ 
+-static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND, int erasedOk)
++static void yaffs_HandleWriteChunkError(yaffs_Device *dev, int chunkInNAND,
++		int erasedOk)
+ {
+-
+ 	int blockInNAND = chunkInNAND / dev->nChunksPerBlock;
+ 	yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, blockInNAND);
+ 
+-	yaffs_HandleChunkError(dev,bi);
++	yaffs_HandleChunkError(dev, bi);
+ 
+-
+-	if(erasedOk ) {
++	if (erasedOk) {
+ 		/* Was an actual write failure, so mark the block for retirement  */
+ 		bi->needsRetiring = 1;
+ 		T(YAFFS_TRACE_ERROR | YAFFS_TRACE_BAD_BLOCKS,
+ 		  (TSTR("**>> Block %d needs retiring" TENDSTR), blockInNAND));
+-
+-
+ 	}
+ 
+ 	/* Delete the chunk */
+@@ -1081,12 +1105,12 @@ static void yaffs_HandleWriteChunkError(
+ 
+ /*---------------- Name handling functions ------------*/
+ 
+-static __u16 yaffs_CalcNameSum(const YCHAR * name)
++static __u16 yaffs_CalcNameSum(const YCHAR *name)
+ {
+ 	__u16 sum = 0;
+ 	__u16 i = 1;
+ 
+-	YUCHAR *bname = (YUCHAR *) name;
++	const YUCHAR *bname = (const YUCHAR *) name;
+ 	if (bname) {
+ 		while ((*bname) && (i < (YAFFS_MAX_NAME_LENGTH/2))) {
+ 
+@@ -1102,14 +1126,14 @@ static __u16 yaffs_CalcNameSum(const YCH
+ 	return sum;
+ }
+ 
+-static void yaffs_SetObjectName(yaffs_Object * obj, const YCHAR * name)
++static void yaffs_SetObjectName(yaffs_Object *obj, const YCHAR *name)
+ {
+ #ifdef CONFIG_YAFFS_SHORT_NAMES_IN_RAM
+-	if (name && yaffs_strlen(name) <= YAFFS_SHORT_NAME_LENGTH) {
++	memset(obj->shortName, 0, sizeof(YCHAR) * (YAFFS_SHORT_NAME_LENGTH+1));
++	if (name && yaffs_strlen(name) <= YAFFS_SHORT_NAME_LENGTH)
+ 		yaffs_strcpy(obj->shortName, name);
+-	} else {
++	else
+ 		obj->shortName[0] = _Y('\0');
+-	}
+ #endif
+ 	obj->sum = yaffs_CalcNameSum(name);
+ }
+@@ -1126,7 +1150,7 @@ static void yaffs_SetObjectName(yaffs_Ob
+  * Don't use this function directly
+  */
+ 
+-static int yaffs_CreateTnodes(yaffs_Device * dev, int nTnodes)
++static int yaffs_CreateTnodes(yaffs_Device *dev, int nTnodes)
+ {
+ 	int i;
+ 	int tnodeSize;
+@@ -1143,6 +1167,9 @@ static int yaffs_CreateTnodes(yaffs_Devi
+ 	 * Must be a multiple of 32-bits  */
+ 	tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
+ 
++	if (tnodeSize < sizeof(yaffs_Tnode))
++		tnodeSize = sizeof(yaffs_Tnode);
++
+ 	/* make these things */
+ 
+ 	newTnodes = YMALLOC(nTnodes * tnodeSize);
+@@ -1150,7 +1177,7 @@ static int yaffs_CreateTnodes(yaffs_Devi
+ 
+ 	if (!newTnodes) {
+ 		T(YAFFS_TRACE_ERROR,
+-		  (TSTR("yaffs: Could not allocate Tnodes" TENDSTR)));
++			(TSTR("yaffs: Could not allocate Tnodes" TENDSTR)));
+ 		return YAFFS_FAIL;
+ 	}
+ 
+@@ -1170,7 +1197,7 @@ static int yaffs_CreateTnodes(yaffs_Devi
+ 	dev->freeTnodes = newTnodes;
+ #else
+ 	/* New hookup for wide tnodes */
+-	for(i = 0; i < nTnodes -1; i++) {
++	for (i = 0; i < nTnodes - 1; i++) {
+ 		curr = (yaffs_Tnode *) &mem[i * tnodeSize];
+ 		next = (yaffs_Tnode *) &mem[(i+1) * tnodeSize];
+ 		curr->internal[0] = next;
+@@ -1197,7 +1224,6 @@ static int yaffs_CreateTnodes(yaffs_Devi
+ 		  (TSTR
+ 		   ("yaffs: Could not add tnodes to management list" TENDSTR)));
+ 		   return YAFFS_FAIL;
+-
+ 	} else {
+ 		tnl->tnodes = newTnodes;
+ 		tnl->next = dev->allocatedTnodeList;
+@@ -1211,14 +1237,13 @@ static int yaffs_CreateTnodes(yaffs_Devi
+ 
+ /* GetTnode gets us a clean tnode. Tries to make allocate more if we run out */
+ 
+-static yaffs_Tnode *yaffs_GetTnodeRaw(yaffs_Device * dev)
++static yaffs_Tnode *yaffs_GetTnodeRaw(yaffs_Device *dev)
+ {
+ 	yaffs_Tnode *tn = NULL;
+ 
+ 	/* If there are none left make more */
+-	if (!dev->freeTnodes) {
++	if (!dev->freeTnodes)
+ 		yaffs_CreateTnodes(dev, YAFFS_ALLOCATION_NTNODES);
+-	}
+ 
+ 	if (dev->freeTnodes) {
+ 		tn = dev->freeTnodes;
+@@ -1233,21 +1258,27 @@ static yaffs_Tnode *yaffs_GetTnodeRaw(ya
+ 		dev->nFreeTnodes--;
+ 	}
+ 
++	dev->nCheckpointBlocksRequired = 0; /* force recalculation*/
++
+ 	return tn;
+ }
+ 
+-static yaffs_Tnode *yaffs_GetTnode(yaffs_Device * dev)
++static yaffs_Tnode *yaffs_GetTnode(yaffs_Device *dev)
+ {
+ 	yaffs_Tnode *tn = yaffs_GetTnodeRaw(dev);
++	int tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
+ 
+-	if(tn)
+-		memset(tn, 0, (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8);
++	if (tnodeSize < sizeof(yaffs_Tnode))
++		tnodeSize = sizeof(yaffs_Tnode);
++
++	if (tn)
++		memset(tn, 0, tnodeSize);
+ 
+ 	return tn;
+ }
+ 
+ /* FreeTnode frees up a tnode and puts it back on the free list */
+-static void yaffs_FreeTnode(yaffs_Device * dev, yaffs_Tnode * tn)
++static void yaffs_FreeTnode(yaffs_Device *dev, yaffs_Tnode *tn)
+ {
+ 	if (tn) {
+ #ifdef CONFIG_YAFFS_TNODE_LIST_DEBUG
+@@ -1262,9 +1293,10 @@ static void yaffs_FreeTnode(yaffs_Device
+ 		dev->freeTnodes = tn;
+ 		dev->nFreeTnodes++;
+ 	}
++	dev->nCheckpointBlocksRequired = 0; /* force recalculation*/
+ }
+ 
+-static void yaffs_DeinitialiseTnodes(yaffs_Device * dev)
++static void yaffs_DeinitialiseTnodes(yaffs_Device *dev)
+ {
+ 	/* Free the list of allocated tnodes */
+ 	yaffs_TnodeList *tmp;
+@@ -1282,71 +1314,72 @@ static void yaffs_DeinitialiseTnodes(yaf
+ 	dev->nFreeTnodes = 0;
+ }
+ 
+-static void yaffs_InitialiseTnodes(yaffs_Device * dev)
++static void yaffs_InitialiseTnodes(yaffs_Device *dev)
+ {
+ 	dev->allocatedTnodeList = NULL;
+ 	dev->freeTnodes = NULL;
+ 	dev->nFreeTnodes = 0;
+ 	dev->nTnodesCreated = 0;
+-
+ }
+ 
+ 
+-void yaffs_PutLevel0Tnode(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos, unsigned val)
++void yaffs_PutLevel0Tnode(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos,
++		unsigned val)
+ {
+-  __u32 *map = (__u32 *)tn;
+-  __u32 bitInMap;
+-  __u32 bitInWord;
+-  __u32 wordInMap;
+-  __u32 mask;
++	__u32 *map = (__u32 *)tn;
++	__u32 bitInMap;
++	__u32 bitInWord;
++	__u32 wordInMap;
++	__u32 mask;
+ 
+-  pos &= YAFFS_TNODES_LEVEL0_MASK;
+-  val >>= dev->chunkGroupBits;
++	pos &= YAFFS_TNODES_LEVEL0_MASK;
++	val >>= dev->chunkGroupBits;
+ 
+-  bitInMap = pos * dev->tnodeWidth;
+-  wordInMap = bitInMap /32;
+-  bitInWord = bitInMap & (32 -1);
++	bitInMap = pos * dev->tnodeWidth;
++	wordInMap = bitInMap / 32;
++	bitInWord = bitInMap & (32 - 1);
+ 
+-  mask = dev->tnodeMask << bitInWord;
++	mask = dev->tnodeMask << bitInWord;
+ 
+-  map[wordInMap] &= ~mask;
+-  map[wordInMap] |= (mask & (val << bitInWord));
++	map[wordInMap] &= ~mask;
++	map[wordInMap] |= (mask & (val << bitInWord));
+ 
+-  if(dev->tnodeWidth > (32-bitInWord)) {
+-    bitInWord = (32 - bitInWord);
+-    wordInMap++;;
+-    mask = dev->tnodeMask >> (/*dev->tnodeWidth -*/ bitInWord);
+-    map[wordInMap] &= ~mask;
+-    map[wordInMap] |= (mask & (val >> bitInWord));
+-  }
++	if (dev->tnodeWidth > (32 - bitInWord)) {
++		bitInWord = (32 - bitInWord);
++		wordInMap++;;
++		mask = dev->tnodeMask >> (/*dev->tnodeWidth -*/ bitInWord);
++		map[wordInMap] &= ~mask;
++		map[wordInMap] |= (mask & (val >> bitInWord));
++	}
+ }
+ 
+-static __u32 yaffs_GetChunkGroupBase(yaffs_Device *dev, yaffs_Tnode *tn, unsigned pos)
++static __u32 yaffs_GetChunkGroupBase(yaffs_Device *dev, yaffs_Tnode *tn,
++		unsigned pos)
+ {
+-  __u32 *map = (__u32 *)tn;
+-  __u32 bitInMap;
+-  __u32 bitInWord;
+-  __u32 wordInMap;
+-  __u32 val;
++	__u32 *map = (__u32 *)tn;
++	__u32 bitInMap;
++	__u32 bitInWord;
++	__u32 wordInMap;
++	__u32 val;
+ 
+-  pos &= YAFFS_TNODES_LEVEL0_MASK;
++	pos &= YAFFS_TNODES_LEVEL0_MASK;
+ 
+-  bitInMap = pos * dev->tnodeWidth;
+-  wordInMap = bitInMap /32;
+-  bitInWord = bitInMap & (32 -1);
++	bitInMap = pos * dev->tnodeWidth;
++	wordInMap = bitInMap / 32;
++	bitInWord = bitInMap & (32 - 1);
+ 
+-  val = map[wordInMap] >> bitInWord;
++	val = map[wordInMap] >> bitInWord;
+ 
+-  if(dev->tnodeWidth > (32-bitInWord)) {
+-    bitInWord = (32 - bitInWord);
+-    wordInMap++;;
+-    val |= (map[wordInMap] << bitInWord);
+-  }
++	if	(dev->tnodeWidth > (32 - bitInWord)) {
++		bitInWord = (32 - bitInWord);
++		wordInMap++;;
++		val |= (map[wordInMap] << bitInWord);
++	}
+ 
+-  val &= dev->tnodeMask;
+-  val <<= dev->chunkGroupBits;
++	val &= dev->tnodeMask;
++	val <<= dev->chunkGroupBits;
+ 
+-  return val;
++	return val;
+ }
+ 
+ /* ------------------- End of individual tnode manipulation -----------------*/
+@@ -1357,24 +1390,21 @@ static __u32 yaffs_GetChunkGroupBase(yaf
+  */
+ 
+ /* FindLevel0Tnode finds the level 0 tnode, if one exists. */
+-static yaffs_Tnode *yaffs_FindLevel0Tnode(yaffs_Device * dev,
+-					  yaffs_FileStructure * fStruct,
+-					  __u32 chunkId)
++static yaffs_Tnode *yaffs_FindLevel0Tnode(yaffs_Device *dev,
++					yaffs_FileStructure *fStruct,
++					__u32 chunkId)
+ {
+-
+ 	yaffs_Tnode *tn = fStruct->top;
+ 	__u32 i;
+ 	int requiredTallness;
+ 	int level = fStruct->topLevel;
+ 
+ 	/* Check sane level and chunk Id */
+-	if (level < 0 || level > YAFFS_TNODES_MAX_LEVEL) {
++	if (level < 0 || level > YAFFS_TNODES_MAX_LEVEL)
+ 		return NULL;
+-	}
+ 
+-	if (chunkId > YAFFS_MAX_CHUNK_ID) {
++	if (chunkId > YAFFS_MAX_CHUNK_ID)
+ 		return NULL;
+-	}
+ 
+ 	/* First check we're tall enough (ie enough topLevel) */
+ 
+@@ -1385,22 +1415,17 @@ static yaffs_Tnode *yaffs_FindLevel0Tnod
+ 		requiredTallness++;
+ 	}
+ 
+-	if (requiredTallness > fStruct->topLevel) {
+-		/* Not tall enough, so we can't find it, return NULL. */
+-		return NULL;
+-	}
++	if (requiredTallness > fStruct->topLevel)
++		return NULL; /* Not tall enough, so we can't find it */
+ 
+ 	/* Traverse down to level 0 */
+ 	while (level > 0 && tn) {
+-		tn = tn->
+-		    internal[(chunkId >>
+-			       ( YAFFS_TNODES_LEVEL0_BITS +
+-			         (level - 1) *
+-			         YAFFS_TNODES_INTERNAL_BITS)
+-			      ) &
+-			     YAFFS_TNODES_INTERNAL_MASK];
++		tn = tn->internal[(chunkId >>
++			(YAFFS_TNODES_LEVEL0_BITS +
++				(level - 1) *
++				YAFFS_TNODES_INTERNAL_BITS)) &
++			YAFFS_TNODES_INTERNAL_MASK];
+ 		level--;
+-
+ 	}
+ 
+ 	return tn;
+@@ -1417,12 +1442,11 @@ static yaffs_Tnode *yaffs_FindLevel0Tnod
+  *  be plugged into the ttree.
+  */
+ 
+-static yaffs_Tnode *yaffs_AddOrFindLevel0Tnode(yaffs_Device * dev,
+-					       yaffs_FileStructure * fStruct,
+-					       __u32 chunkId,
+-					       yaffs_Tnode *passedTn)
++static yaffs_Tnode *yaffs_AddOrFindLevel0Tnode(yaffs_Device *dev,
++					yaffs_FileStructure *fStruct,
++					__u32 chunkId,
++					yaffs_Tnode *passedTn)
+ {
+-
+ 	int requiredTallness;
+ 	int i;
+ 	int l;
+@@ -1432,13 +1456,11 @@ static yaffs_Tnode *yaffs_AddOrFindLevel
+ 
+ 
+ 	/* Check sane level and page Id */
+-	if (fStruct->topLevel < 0 || fStruct->topLevel > YAFFS_TNODES_MAX_LEVEL) {
++	if (fStruct->topLevel < 0 || fStruct->topLevel > YAFFS_TNODES_MAX_LEVEL)
+ 		return NULL;
+-	}
+ 
+-	if (chunkId > YAFFS_MAX_CHUNK_ID) {
++	if (chunkId > YAFFS_MAX_CHUNK_ID)
+ 		return NULL;
+-	}
+ 
+ 	/* First check we're tall enough (ie enough topLevel) */
+ 
+@@ -1451,7 +1473,7 @@ static yaffs_Tnode *yaffs_AddOrFindLevel
+ 
+ 
+ 	if (requiredTallness > fStruct->topLevel) {
+-		/* Not tall enough,gotta make the tree taller */
++		/* Not tall enough, gotta make the tree taller */
+ 		for (i = fStruct->topLevel; i < requiredTallness; i++) {
+ 
+ 			tn = yaffs_GetTnode(dev);
+@@ -1473,27 +1495,27 @@ static yaffs_Tnode *yaffs_AddOrFindLevel
+ 	l = fStruct->topLevel;
+ 	tn = fStruct->top;
+ 
+-	if(l > 0) {
++	if (l > 0) {
+ 		while (l > 0 && tn) {
+ 			x = (chunkId >>
+-			     ( YAFFS_TNODES_LEVEL0_BITS +
++			     (YAFFS_TNODES_LEVEL0_BITS +
+ 			      (l - 1) * YAFFS_TNODES_INTERNAL_BITS)) &
+ 			    YAFFS_TNODES_INTERNAL_MASK;
+ 
+ 
+-			if((l>1) && !tn->internal[x]){
++			if ((l > 1) && !tn->internal[x]) {
+ 				/* Add missing non-level-zero tnode */
+ 				tn->internal[x] = yaffs_GetTnode(dev);
+ 
+-			} else if(l == 1) {
++			} else if (l == 1) {
+ 				/* Looking from level 1 at level 0 */
+-			 	if (passedTn) {
++				if (passedTn) {
+ 					/* If we already have one, then release it.*/
+-					if(tn->internal[x])
+-						yaffs_FreeTnode(dev,tn->internal[x]);
++					if (tn->internal[x])
++						yaffs_FreeTnode(dev, tn->internal[x]);
+ 					tn->internal[x] = passedTn;
+ 
+-				} else if(!tn->internal[x]) {
++				} else if (!tn->internal[x]) {
+ 					/* Don't have one, none passed in */
+ 					tn->internal[x] = yaffs_GetTnode(dev);
+ 				}
+@@ -1504,31 +1526,29 @@ static yaffs_Tnode *yaffs_AddOrFindLevel
+ 		}
+ 	} else {
+ 		/* top is level 0 */
+-		if(passedTn) {
+-			memcpy(tn,passedTn,(dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8);
+-			yaffs_FreeTnode(dev,passedTn);
++		if (passedTn) {
++			memcpy(tn, passedTn, (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8);
++			yaffs_FreeTnode(dev, passedTn);
+ 		}
+ 	}
+ 
+ 	return tn;
+ }
+ 
+-static int yaffs_FindChunkInGroup(yaffs_Device * dev, int theChunk,
+-				  yaffs_ExtendedTags * tags, int objectId,
+-				  int chunkInInode)
++static int yaffs_FindChunkInGroup(yaffs_Device *dev, int theChunk,
++				yaffs_ExtendedTags *tags, int objectId,
++				int chunkInInode)
+ {
+ 	int j;
+ 
+ 	for (j = 0; theChunk && j < dev->chunkGroupSize; j++) {
+-		if (yaffs_CheckChunkBit
+-		    (dev, theChunk / dev->nChunksPerBlock,
+-		     theChunk % dev->nChunksPerBlock)) {
++		if (yaffs_CheckChunkBit(dev, theChunk / dev->nChunksPerBlock,
++				theChunk % dev->nChunksPerBlock)) {
+ 			yaffs_ReadChunkWithTagsFromNAND(dev, theChunk, NULL,
+ 							tags);
+ 			if (yaffs_TagsMatch(tags, objectId, chunkInInode)) {
+ 				/* found it; */
+ 				return theChunk;
+-
+ 			}
+ 		}
+ 		theChunk++;
+@@ -1543,7 +1563,7 @@ static int yaffs_FindChunkInGroup(yaffs_
+  * Returns 0 if it stopped early due to hitting the limit and the delete is incomplete.
+  */
+ 
+-static int yaffs_DeleteWorker(yaffs_Object * in, yaffs_Tnode * tn, __u32 level,
++static int yaffs_DeleteWorker(yaffs_Object *in, yaffs_Tnode *tn, __u32 level,
+ 			      int chunkOffset, int *limit)
+ {
+ 	int i;
+@@ -1557,7 +1577,6 @@ static int yaffs_DeleteWorker(yaffs_Obje
+ 
+ 	if (tn) {
+ 		if (level > 0) {
+-
+ 			for (i = YAFFS_NTNODES_INTERNAL - 1; allDone && i >= 0;
+ 			     i--) {
+ 				if (tn->internal[i]) {
+@@ -1565,17 +1584,17 @@ static int yaffs_DeleteWorker(yaffs_Obje
+ 						allDone = 0;
+ 					} else {
+ 						allDone =
+-						    yaffs_DeleteWorker(in,
+-								       tn->
+-								       internal
+-								       [i],
+-								       level -
+-								       1,
+-								       (chunkOffset
++							yaffs_DeleteWorker(in,
++								tn->
++								internal
++								[i],
++								level -
++								1,
++								(chunkOffset
+ 									<<
+ 									YAFFS_TNODES_INTERNAL_BITS)
+-								       + i,
+-								       limit);
++								+ i,
++								limit);
+ 					}
+ 					if (allDone) {
+ 						yaffs_FreeTnode(dev,
+@@ -1584,27 +1603,25 @@ static int yaffs_DeleteWorker(yaffs_Obje
+ 						tn->internal[i] = NULL;
+ 					}
+ 				}
+-
+ 			}
+ 			return (allDone) ? 1 : 0;
+ 		} else if (level == 0) {
+ 			int hitLimit = 0;
+ 
+ 			for (i = YAFFS_NTNODES_LEVEL0 - 1; i >= 0 && !hitLimit;
+-			     i--) {
+-			        theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
++					i--) {
++				theChunk = yaffs_GetChunkGroupBase(dev, tn, i);
+ 				if (theChunk) {
+ 
+-					chunkInInode =
+-					    (chunkOffset <<
+-					     YAFFS_TNODES_LEVEL0_BITS) + i;
++					chunkInInode = (chunkOffset <<
++						YAFFS_TNODES_LEVEL0_BITS) + i;
+ 
+ 					foundChunk =
+-					    yaffs_FindChunkInGroup(dev,
+-								   theChunk,
+-								   &tags,
+-								   in->objectId,
+-								   chunkInInode);
++						yaffs_FindChunkInGroup(dev,
++								theChunk,
++								&tags,
++								in->objectId,
++								chunkInInode);
+ 
+ 					if (foundChunk > 0) {
+ 						yaffs_DeleteChunk(dev,
+@@ -1613,14 +1630,13 @@ static int yaffs_DeleteWorker(yaffs_Obje
+ 						in->nDataChunks--;
+ 						if (limit) {
+ 							*limit = *limit - 1;
+-							if (*limit <= 0) {
++							if (*limit <= 0)
+ 								hitLimit = 1;
+-							}
+ 						}
+ 
+ 					}
+ 
+-					yaffs_PutLevel0Tnode(dev,tn,i,0);
++					yaffs_PutLevel0Tnode(dev, tn, i, 0);
+ 				}
+ 
+ 			}
+@@ -1634,9 +1650,8 @@ static int yaffs_DeleteWorker(yaffs_Obje
+ 
+ }
+ 
+-static void yaffs_SoftDeleteChunk(yaffs_Device * dev, int chunk)
++static void yaffs_SoftDeleteChunk(yaffs_Device *dev, int chunk)
+ {
+-
+ 	yaffs_BlockInfo *theBlock;
+ 
+ 	T(YAFFS_TRACE_DELETION, (TSTR("soft delete chunk %d" TENDSTR), chunk));
+@@ -1654,7 +1669,7 @@ static void yaffs_SoftDeleteChunk(yaffs_
+  * Thus, essentially this is the same as DeleteWorker except that the chunks are soft deleted.
+  */
+ 
+-static int yaffs_SoftDeleteWorker(yaffs_Object * in, yaffs_Tnode * tn,
++static int yaffs_SoftDeleteWorker(yaffs_Object *in, yaffs_Tnode *tn,
+ 				  __u32 level, int chunkOffset)
+ {
+ 	int i;
+@@ -1691,14 +1706,14 @@ static int yaffs_SoftDeleteWorker(yaffs_
+ 		} else if (level == 0) {
+ 
+ 			for (i = YAFFS_NTNODES_LEVEL0 - 1; i >= 0; i--) {
+-				theChunk = yaffs_GetChunkGroupBase(dev,tn,i);
++				theChunk = yaffs_GetChunkGroupBase(dev, tn, i);
+ 				if (theChunk) {
+ 					/* Note this does not find the real chunk, only the chunk group.
+ 					 * We make an assumption that a chunk group is not larger than
+ 					 * a block.
+ 					 */
+ 					yaffs_SoftDeleteChunk(dev, theChunk);
+-					yaffs_PutLevel0Tnode(dev,tn,i,0);
++					yaffs_PutLevel0Tnode(dev, tn, i, 0);
+ 				}
+ 
+ 			}
+@@ -1712,7 +1727,7 @@ static int yaffs_SoftDeleteWorker(yaffs_
+ 
+ }
+ 
+-static void yaffs_SoftDeleteFile(yaffs_Object * obj)
++static void yaffs_SoftDeleteFile(yaffs_Object *obj)
+ {
+ 	if (obj->deleted &&
+ 	    obj->variantType == YAFFS_OBJECT_TYPE_FILE && !obj->softDeleted) {
+@@ -1746,8 +1761,8 @@ static void yaffs_SoftDeleteFile(yaffs_O
+  * by a special case.
+  */
+ 
+-static yaffs_Tnode *yaffs_PruneWorker(yaffs_Device * dev, yaffs_Tnode * tn,
+-				      __u32 level, int del0)
++static yaffs_Tnode *yaffs_PruneWorker(yaffs_Device *dev, yaffs_Tnode *tn,
++				__u32 level, int del0)
+ {
+ 	int i;
+ 	int hasData;
+@@ -1763,9 +1778,8 @@ static yaffs_Tnode *yaffs_PruneWorker(ya
+ 						      (i == 0) ? del0 : 1);
+ 			}
+ 
+-			if (tn->internal[i]) {
++			if (tn->internal[i])
+ 				hasData++;
+-			}
+ 		}
+ 
+ 		if (hasData == 0 && del0) {
+@@ -1781,8 +1795,8 @@ static yaffs_Tnode *yaffs_PruneWorker(ya
+ 
+ }
+ 
+-static int yaffs_PruneFileStructure(yaffs_Device * dev,
+-				    yaffs_FileStructure * fStruct)
++static int yaffs_PruneFileStructure(yaffs_Device *dev,
++				yaffs_FileStructure *fStruct)
+ {
+ 	int i;
+ 	int hasData;
+@@ -1805,9 +1819,8 @@ static int yaffs_PruneFileStructure(yaff
+ 
+ 			hasData = 0;
+ 			for (i = 1; i < YAFFS_NTNODES_INTERNAL; i++) {
+-				if (tn->internal[i]) {
++				if (tn->internal[i])
+ 					hasData++;
+-				}
+ 			}
+ 
+ 			if (!hasData) {
+@@ -1828,7 +1841,7 @@ static int yaffs_PruneFileStructure(yaff
+ /* yaffs_CreateFreeObjects creates a bunch more objects and
+  * adds them to the object free list.
+  */
+-static int yaffs_CreateFreeObjects(yaffs_Device * dev, int nObjects)
++static int yaffs_CreateFreeObjects(yaffs_Device *dev, int nObjects)
+ {
+ 	int i;
+ 	yaffs_Object *newObjects;
+@@ -1842,9 +1855,9 @@ static int yaffs_CreateFreeObjects(yaffs
+ 	list = YMALLOC(sizeof(yaffs_ObjectList));
+ 
+ 	if (!newObjects || !list) {
+-		if(newObjects)
++		if (newObjects)
+ 			YFREE(newObjects);
+-		if(list)
++		if (list)
+ 			YFREE(list);
+ 		T(YAFFS_TRACE_ALLOCATE,
+ 		  (TSTR("yaffs: Could not allocate more objects" TENDSTR)));
+@@ -1854,7 +1867,7 @@ static int yaffs_CreateFreeObjects(yaffs
+ 	/* Hook them into the free list */
+ 	for (i = 0; i < nObjects - 1; i++) {
+ 		newObjects[i].siblings.next =
+-		    (struct list_head *)(&newObjects[i + 1]);
++				(struct ylist_head *)(&newObjects[i + 1]);
+ 	}
+ 
+ 	newObjects[nObjects - 1].siblings.next = (void *)dev->freeObjects;
+@@ -1873,85 +1886,109 @@ static int yaffs_CreateFreeObjects(yaffs
+ 
+ 
+ /* AllocateEmptyObject gets us a clean Object. Tries to make allocate more if we run out */
+-static yaffs_Object *yaffs_AllocateEmptyObject(yaffs_Device * dev)
++static yaffs_Object *yaffs_AllocateEmptyObject(yaffs_Device *dev)
+ {
+ 	yaffs_Object *tn = NULL;
+ 
++#ifdef VALGRIND_TEST
++	tn = YMALLOC(sizeof(yaffs_Object));
++#else
+ 	/* If there are none left make more */
+-	if (!dev->freeObjects) {
++	if (!dev->freeObjects)
+ 		yaffs_CreateFreeObjects(dev, YAFFS_ALLOCATION_NOBJECTS);
+-	}
+ 
+ 	if (dev->freeObjects) {
+ 		tn = dev->freeObjects;
+ 		dev->freeObjects =
+-		    (yaffs_Object *) (dev->freeObjects->siblings.next);
++			(yaffs_Object *) (dev->freeObjects->siblings.next);
+ 		dev->nFreeObjects--;
+-
++	}
++#endif
++	if (tn) {
+ 		/* Now sweeten it up... */
+ 
+ 		memset(tn, 0, sizeof(yaffs_Object));
++		tn->beingCreated = 1;
++
+ 		tn->myDev = dev;
+-		tn->chunkId = -1;
++		tn->hdrChunk = 0;
+ 		tn->variantType = YAFFS_OBJECT_TYPE_UNKNOWN;
+-		INIT_LIST_HEAD(&(tn->hardLinks));
+-		INIT_LIST_HEAD(&(tn->hashLink));
+-		INIT_LIST_HEAD(&tn->siblings);
++		YINIT_LIST_HEAD(&(tn->hardLinks));
++		YINIT_LIST_HEAD(&(tn->hashLink));
++		YINIT_LIST_HEAD(&tn->siblings);
++
++
++		/* Now make the directory sane */
++		if (dev->rootDir) {
++			tn->parent = dev->rootDir;
++			ylist_add(&(tn->siblings), &dev->rootDir->variant.directoryVariant.children);
++		}
+ 
+ 		/* Add it to the lost and found directory.
+ 		 * NB Can't put root or lostNFound in lostNFound so
+ 		 * check if lostNFound exists first
+ 		 */
+-		if (dev->lostNFoundDir) {
++		if (dev->lostNFoundDir)
+ 			yaffs_AddObjectToDirectory(dev->lostNFoundDir, tn);
+-		}
++
++		tn->beingCreated = 0;
+ 	}
+ 
++	dev->nCheckpointBlocksRequired = 0; /* force recalculation*/
++
+ 	return tn;
+ }
+ 
+-static yaffs_Object *yaffs_CreateFakeDirectory(yaffs_Device * dev, int number,
++static yaffs_Object *yaffs_CreateFakeDirectory(yaffs_Device *dev, int number,
+ 					       __u32 mode)
+ {
+ 
+ 	yaffs_Object *obj =
+ 	    yaffs_CreateNewObject(dev, number, YAFFS_OBJECT_TYPE_DIRECTORY);
+ 	if (obj) {
+-		obj->fake = 1;		/* it is fake so it has no NAND presence... */
++		obj->fake = 1;		/* it is fake so it might have no NAND presence... */
+ 		obj->renameAllowed = 0;	/* ... and we're not allowed to rename it... */
+ 		obj->unlinkAllowed = 0;	/* ... or unlink it */
+ 		obj->deleted = 0;
+ 		obj->unlinked = 0;
+ 		obj->yst_mode = mode;
+ 		obj->myDev = dev;
+-		obj->chunkId = 0;	/* Not a valid chunk. */
++		obj->hdrChunk = 0;	/* Not a valid chunk. */
+ 	}
+ 
+ 	return obj;
+ 
+ }
+ 
+-static void yaffs_UnhashObject(yaffs_Object * tn)
++static void yaffs_UnhashObject(yaffs_Object *tn)
+ {
+ 	int bucket;
+ 	yaffs_Device *dev = tn->myDev;
+ 
+ 	/* If it is still linked into the bucket list, free from the list */
+-	if (!list_empty(&tn->hashLink)) {
+-		list_del_init(&tn->hashLink);
++	if (!ylist_empty(&tn->hashLink)) {
++		ylist_del_init(&tn->hashLink);
+ 		bucket = yaffs_HashFunction(tn->objectId);
+ 		dev->objectBucket[bucket].count--;
+ 	}
+-
+ }
+ 
+ /*  FreeObject frees up a Object and puts it back on the free list */
+-static void yaffs_FreeObject(yaffs_Object * tn)
++static void yaffs_FreeObject(yaffs_Object *tn)
+ {
+-
+ 	yaffs_Device *dev = tn->myDev;
+ 
+-#ifdef  __KERNEL__
++#ifdef __KERNEL__
++	T(YAFFS_TRACE_OS, (TSTR("FreeObject %p inode %p"TENDSTR), tn, tn->myInode));
++#endif
++
++	if (tn->parent)
++		YBUG();
++	if (!ylist_empty(&tn->siblings))
++		YBUG();
++
++
++#ifdef __KERNEL__
+ 	if (tn->myInode) {
+ 		/* We're still hooked up to a cached inode.
+ 		 * Don't delete now, but mark for later deletion
+@@ -1963,24 +2000,28 @@ static void yaffs_FreeObject(yaffs_Objec
+ 
+ 	yaffs_UnhashObject(tn);
+ 
++#ifdef VALGRIND_TEST
++	YFREE(tn);
++#else
+ 	/* Link into the free list. */
+-	tn->siblings.next = (struct list_head *)(dev->freeObjects);
++	tn->siblings.next = (struct ylist_head *)(dev->freeObjects);
+ 	dev->freeObjects = tn;
+ 	dev->nFreeObjects++;
++#endif
++	dev->nCheckpointBlocksRequired = 0; /* force recalculation*/
+ }
+ 
+ #ifdef __KERNEL__
+ 
+-void yaffs_HandleDeferedFree(yaffs_Object * obj)
++void yaffs_HandleDeferedFree(yaffs_Object *obj)
+ {
+-	if (obj->deferedFree) {
++	if (obj->deferedFree)
+ 		yaffs_FreeObject(obj);
+-	}
+ }
+ 
+ #endif
+ 
+-static void yaffs_DeinitialiseObjects(yaffs_Device * dev)
++static void yaffs_DeinitialiseObjects(yaffs_Device *dev)
+ {
+ 	/* Free the list of allocated Objects */
+ 
+@@ -1998,7 +2039,7 @@ static void yaffs_DeinitialiseObjects(ya
+ 	dev->nFreeObjects = 0;
+ }
+ 
+-static void yaffs_InitialiseObjects(yaffs_Device * dev)
++static void yaffs_InitialiseObjects(yaffs_Device *dev)
+ {
+ 	int i;
+ 
+@@ -2007,15 +2048,14 @@ static void yaffs_InitialiseObjects(yaff
+ 	dev->nFreeObjects = 0;
+ 
+ 	for (i = 0; i < YAFFS_NOBJECT_BUCKETS; i++) {
+-		INIT_LIST_HEAD(&dev->objectBucket[i].list);
++		YINIT_LIST_HEAD(&dev->objectBucket[i].list);
+ 		dev->objectBucket[i].count = 0;
+ 	}
+-
+ }
+ 
+-static int yaffs_FindNiceObjectBucket(yaffs_Device * dev)
++static int yaffs_FindNiceObjectBucket(yaffs_Device *dev)
+ {
+-	static int x = 0;
++	static int x;
+ 	int i;
+ 	int l = 999;
+ 	int lowest = 999999;
+@@ -2049,7 +2089,7 @@ static int yaffs_FindNiceObjectBucket(ya
+ 	return l;
+ }
+ 
+-static int yaffs_CreateNewObjectNumber(yaffs_Device * dev)
++static int yaffs_CreateNewObjectNumber(yaffs_Device *dev)
+ {
+ 	int bucket = yaffs_FindNiceObjectBucket(dev);
+ 
+@@ -2058,7 +2098,7 @@ static int yaffs_CreateNewObjectNumber(y
+ 	 */
+ 
+ 	int found = 0;
+-	struct list_head *i;
++	struct ylist_head *i;
+ 
+ 	__u32 n = (__u32) bucket;
+ 
+@@ -2068,41 +2108,38 @@ static int yaffs_CreateNewObjectNumber(y
+ 		found = 1;
+ 		n += YAFFS_NOBJECT_BUCKETS;
+ 		if (1 || dev->objectBucket[bucket].count > 0) {
+-			list_for_each(i, &dev->objectBucket[bucket].list) {
++			ylist_for_each(i, &dev->objectBucket[bucket].list) {
+ 				/* If there is already one in the list */
+-				if (i
+-				    && list_entry(i, yaffs_Object,
+-						  hashLink)->objectId == n) {
++				if (i && ylist_entry(i, yaffs_Object,
++						hashLink)->objectId == n) {
+ 					found = 0;
+ 				}
+ 			}
+ 		}
+ 	}
+ 
+-
+ 	return n;
+ }
+ 
+-static void yaffs_HashObject(yaffs_Object * in)
++static void yaffs_HashObject(yaffs_Object *in)
+ {
+ 	int bucket = yaffs_HashFunction(in->objectId);
+ 	yaffs_Device *dev = in->myDev;
+ 
+-	list_add(&in->hashLink, &dev->objectBucket[bucket].list);
++	ylist_add(&in->hashLink, &dev->objectBucket[bucket].list);
+ 	dev->objectBucket[bucket].count++;
+-
+ }
+ 
+-yaffs_Object *yaffs_FindObjectByNumber(yaffs_Device * dev, __u32 number)
++yaffs_Object *yaffs_FindObjectByNumber(yaffs_Device *dev, __u32 number)
+ {
+ 	int bucket = yaffs_HashFunction(number);
+-	struct list_head *i;
++	struct ylist_head *i;
+ 	yaffs_Object *in;
+ 
+-	list_for_each(i, &dev->objectBucket[bucket].list) {
++	ylist_for_each(i, &dev->objectBucket[bucket].list) {
+ 		/* Look if it is in the list */
+ 		if (i) {
+-			in = list_entry(i, yaffs_Object, hashLink);
++			in = ylist_entry(i, yaffs_Object, hashLink);
+ 			if (in->objectId == number) {
+ #ifdef __KERNEL__
+ 				/* Don't tell the VFS about this one if it is defered free */
+@@ -2118,31 +2155,27 @@ yaffs_Object *yaffs_FindObjectByNumber(y
+ 	return NULL;
+ }
+ 
+-yaffs_Object *yaffs_CreateNewObject(yaffs_Device * dev, int number,
++yaffs_Object *yaffs_CreateNewObject(yaffs_Device *dev, int number,
+ 				    yaffs_ObjectType type)
+ {
+-
+ 	yaffs_Object *theObject;
+-	yaffs_Tnode *tn;
++	yaffs_Tnode *tn = NULL;
+ 
+-	if (number < 0) {
++	if (number < 0)
+ 		number = yaffs_CreateNewObjectNumber(dev);
+-	}
+ 
+ 	theObject = yaffs_AllocateEmptyObject(dev);
+-	if(!theObject)
++	if (!theObject)
+ 		return NULL;
+ 
+-	if(type == YAFFS_OBJECT_TYPE_FILE){
++	if (type == YAFFS_OBJECT_TYPE_FILE) {
+ 		tn = yaffs_GetTnode(dev);
+-		if(!tn){
++		if (!tn) {
+ 			yaffs_FreeObject(theObject);
+ 			return NULL;
+ 		}
+ 	}
+ 
+-
+-
+ 	if (theObject) {
+ 		theObject->fake = 0;
+ 		theObject->renameAllowed = 1;
+@@ -2171,8 +2204,8 @@ yaffs_Object *yaffs_CreateNewObject(yaff
+ 			theObject->variant.fileVariant.top = tn;
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_DIRECTORY:
+-			INIT_LIST_HEAD(&theObject->variant.directoryVariant.
+-				       children);
++			YINIT_LIST_HEAD(&theObject->variant.directoryVariant.
++					children);
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_SYMLINK:
+ 		case YAFFS_OBJECT_TYPE_HARDLINK:
+@@ -2188,32 +2221,30 @@ yaffs_Object *yaffs_CreateNewObject(yaff
+ 	return theObject;
+ }
+ 
+-static yaffs_Object *yaffs_FindOrCreateObjectByNumber(yaffs_Device * dev,
++static yaffs_Object *yaffs_FindOrCreateObjectByNumber(yaffs_Device *dev,
+ 						      int number,
+ 						      yaffs_ObjectType type)
+ {
+ 	yaffs_Object *theObject = NULL;
+ 
+-	if (number > 0) {
++	if (number > 0)
+ 		theObject = yaffs_FindObjectByNumber(dev, number);
+-	}
+ 
+-	if (!theObject) {
++	if (!theObject)
+ 		theObject = yaffs_CreateNewObject(dev, number, type);
+-	}
+ 
+ 	return theObject;
+ 
+ }
+ 
+ 
+-static YCHAR *yaffs_CloneString(const YCHAR * str)
++static YCHAR *yaffs_CloneString(const YCHAR *str)
+ {
+ 	YCHAR *newStr = NULL;
+ 
+ 	if (str && *str) {
+ 		newStr = YMALLOC((yaffs_strlen(str) + 1) * sizeof(YCHAR));
+-		if(newStr)
++		if (newStr)
+ 			yaffs_strcpy(newStr, str);
+ 	}
+ 
+@@ -2229,29 +2260,31 @@ static YCHAR *yaffs_CloneString(const YC
+  */
+ 
+ static yaffs_Object *yaffs_MknodObject(yaffs_ObjectType type,
+-				       yaffs_Object * parent,
+-				       const YCHAR * name,
++				       yaffs_Object *parent,
++				       const YCHAR *name,
+ 				       __u32 mode,
+ 				       __u32 uid,
+ 				       __u32 gid,
+-				       yaffs_Object * equivalentObject,
+-				       const YCHAR * aliasString, __u32 rdev)
++				       yaffs_Object *equivalentObject,
++				       const YCHAR *aliasString, __u32 rdev)
+ {
+ 	yaffs_Object *in;
+-	YCHAR *str;
++	YCHAR *str = NULL;
+ 
+ 	yaffs_Device *dev = parent->myDev;
+ 
+ 	/* Check if the entry exists. If it does then fail the call since we don't want a dup.*/
+-	if (yaffs_FindObjectByName(parent, name)) {
++	if (yaffs_FindObjectByName(parent, name))
+ 		return NULL;
+-	}
+ 
+ 	in = yaffs_CreateNewObject(dev, -1, type);
+ 
+-	if(type == YAFFS_OBJECT_TYPE_SYMLINK){
++	if (!in)
++		return YAFFS_FAIL;
++
++	if (type == YAFFS_OBJECT_TYPE_SYMLINK) {
+ 		str = yaffs_CloneString(aliasString);
+-		if(!str){
++		if (!str) {
+ 			yaffs_FreeObject(in);
+ 			return NULL;
+ 		}
+@@ -2260,7 +2293,7 @@ static yaffs_Object *yaffs_MknodObject(y
+ 
+ 
+ 	if (in) {
+-		in->chunkId = -1;
++		in->hdrChunk = 0;
+ 		in->valid = 1;
+ 		in->variantType = type;
+ 
+@@ -2293,10 +2326,10 @@ static yaffs_Object *yaffs_MknodObject(y
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_HARDLINK:
+ 			in->variant.hardLinkVariant.equivalentObject =
+-			    equivalentObject;
++				equivalentObject;
+ 			in->variant.hardLinkVariant.equivalentObjectId =
+-			    equivalentObject->objectId;
+-			list_add(&in->hardLinks, &equivalentObject->hardLinks);
++				equivalentObject->objectId;
++			ylist_add(&in->hardLinks, &equivalentObject->hardLinks);
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_FILE:
+ 		case YAFFS_OBJECT_TYPE_DIRECTORY:
+@@ -2308,7 +2341,7 @@ static yaffs_Object *yaffs_MknodObject(y
+ 
+ 		if (yaffs_UpdateObjectHeader(in, name, 0, 0, 0) < 0) {
+ 			/* Could not create the object header, fail the creation */
+-			yaffs_DestroyObject(in);
++			yaffs_DeleteObject(in);
+ 			in = NULL;
+ 		}
+ 
+@@ -2317,38 +2350,38 @@ static yaffs_Object *yaffs_MknodObject(y
+ 	return in;
+ }
+ 
+-yaffs_Object *yaffs_MknodFile(yaffs_Object * parent, const YCHAR * name,
+-			      __u32 mode, __u32 uid, __u32 gid)
++yaffs_Object *yaffs_MknodFile(yaffs_Object *parent, const YCHAR *name,
++			__u32 mode, __u32 uid, __u32 gid)
+ {
+ 	return yaffs_MknodObject(YAFFS_OBJECT_TYPE_FILE, parent, name, mode,
+-				 uid, gid, NULL, NULL, 0);
++				uid, gid, NULL, NULL, 0);
+ }
+ 
+-yaffs_Object *yaffs_MknodDirectory(yaffs_Object * parent, const YCHAR * name,
+-				   __u32 mode, __u32 uid, __u32 gid)
++yaffs_Object *yaffs_MknodDirectory(yaffs_Object *parent, const YCHAR *name,
++				__u32 mode, __u32 uid, __u32 gid)
+ {
+ 	return yaffs_MknodObject(YAFFS_OBJECT_TYPE_DIRECTORY, parent, name,
+ 				 mode, uid, gid, NULL, NULL, 0);
+ }
+ 
+-yaffs_Object *yaffs_MknodSpecial(yaffs_Object * parent, const YCHAR * name,
+-				 __u32 mode, __u32 uid, __u32 gid, __u32 rdev)
++yaffs_Object *yaffs_MknodSpecial(yaffs_Object *parent, const YCHAR *name,
++				__u32 mode, __u32 uid, __u32 gid, __u32 rdev)
+ {
+ 	return yaffs_MknodObject(YAFFS_OBJECT_TYPE_SPECIAL, parent, name, mode,
+ 				 uid, gid, NULL, NULL, rdev);
+ }
+ 
+-yaffs_Object *yaffs_MknodSymLink(yaffs_Object * parent, const YCHAR * name,
+-				 __u32 mode, __u32 uid, __u32 gid,
+-				 const YCHAR * alias)
++yaffs_Object *yaffs_MknodSymLink(yaffs_Object *parent, const YCHAR *name,
++				__u32 mode, __u32 uid, __u32 gid,
++				const YCHAR *alias)
+ {
+ 	return yaffs_MknodObject(YAFFS_OBJECT_TYPE_SYMLINK, parent, name, mode,
+-				 uid, gid, NULL, alias, 0);
++				uid, gid, NULL, alias, 0);
+ }
+ 
+ /* yaffs_Link returns the object id of the equivalent object.*/
+-yaffs_Object *yaffs_Link(yaffs_Object * parent, const YCHAR * name,
+-			 yaffs_Object * equivalentObject)
++yaffs_Object *yaffs_Link(yaffs_Object *parent, const YCHAR *name,
++			yaffs_Object *equivalentObject)
+ {
+ 	/* Get the real object in case we were fed a hard link as an equivalent object */
+ 	equivalentObject = yaffs_GetEquivalentObject(equivalentObject);
+@@ -2363,33 +2396,31 @@ yaffs_Object *yaffs_Link(yaffs_Object *
+ 
+ }
+ 
+-static int yaffs_ChangeObjectName(yaffs_Object * obj, yaffs_Object * newDir,
+-				  const YCHAR * newName, int force, int shadows)
++static int yaffs_ChangeObjectName(yaffs_Object *obj, yaffs_Object *newDir,
++				const YCHAR *newName, int force, int shadows)
+ {
+ 	int unlinkOp;
+ 	int deleteOp;
+ 
+ 	yaffs_Object *existingTarget;
+ 
+-	if (newDir == NULL) {
++	if (newDir == NULL)
+ 		newDir = obj->parent;	/* use the old directory */
+-	}
+ 
+ 	if (newDir->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 		T(YAFFS_TRACE_ALWAYS,
+ 		  (TSTR
+-		   ("tragendy: yaffs_ChangeObjectName: newDir is not a directory"
++		   ("tragedy: yaffs_ChangeObjectName: newDir is not a directory"
+ 		    TENDSTR)));
+ 		YBUG();
+ 	}
+ 
+ 	/* TODO: Do we need this different handling for YAFFS2 and YAFFS1?? */
+-	if (obj->myDev->isYaffs2) {
++	if (obj->myDev->isYaffs2)
+ 		unlinkOp = (newDir == obj->myDev->unlinkedDir);
+-	} else {
++	else
+ 		unlinkOp = (newDir == obj->myDev->unlinkedDir
+ 			    && obj->variantType == YAFFS_OBJECT_TYPE_FILE);
+-	}
+ 
+ 	deleteOp = (newDir == obj->myDev->deletedDir);
+ 
+@@ -2415,40 +2446,40 @@ static int yaffs_ChangeObjectName(yaffs_
+ 			obj->unlinked = 1;
+ 
+ 		/* If it is a deletion then we mark it as a shrink for gc purposes. */
+-		if (yaffs_UpdateObjectHeader(obj, newName, 0, deleteOp, shadows)>= 0)
++		if (yaffs_UpdateObjectHeader(obj, newName, 0, deleteOp, shadows) >= 0)
+ 			return YAFFS_OK;
+ 	}
+ 
+ 	return YAFFS_FAIL;
+ }
+ 
+-int yaffs_RenameObject(yaffs_Object * oldDir, const YCHAR * oldName,
+-		       yaffs_Object * newDir, const YCHAR * newName)
++int yaffs_RenameObject(yaffs_Object *oldDir, const YCHAR *oldName,
++		yaffs_Object *newDir, const YCHAR *newName)
+ {
+-	yaffs_Object *obj;
+-	yaffs_Object *existingTarget;
++	yaffs_Object *obj = NULL;
++	yaffs_Object *existingTarget = NULL;
+ 	int force = 0;
+ 
++
++	if (!oldDir || oldDir->variantType != YAFFS_OBJECT_TYPE_DIRECTORY)
++		YBUG();
++	if (!newDir || newDir->variantType != YAFFS_OBJECT_TYPE_DIRECTORY)
++		YBUG();
++
+ #ifdef CONFIG_YAFFS_CASE_INSENSITIVE
+ 	/* Special case for case insemsitive systems (eg. WinCE).
+ 	 * While look-up is case insensitive, the name isn't.
+ 	 * Therefore we might want to change x.txt to X.txt
+ 	*/
+-	if (oldDir == newDir && yaffs_strcmp(oldName, newName) == 0) {
++	if (oldDir == newDir && yaffs_strcmp(oldName, newName) == 0)
+ 		force = 1;
+-	}
+ #endif
+ 
++	else if (yaffs_strlen(newName) > YAFFS_MAX_NAME_LENGTH)
++		/* ENAMETOOLONG */
++		return YAFFS_FAIL;
++
+ 	obj = yaffs_FindObjectByName(oldDir, oldName);
+-	/* Check new name to long. */
+-	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK &&
+-	    yaffs_strlen(newName) > YAFFS_MAX_ALIAS_LENGTH)
+-	  /* ENAMETOOLONG */
+-	  return YAFFS_FAIL;
+-	else if (obj->variantType != YAFFS_OBJECT_TYPE_SYMLINK &&
+-		 yaffs_strlen(newName) > YAFFS_MAX_NAME_LENGTH)
+-	  /* ENAMETOOLONG */
+-	  return YAFFS_FAIL;
+ 
+ 	if (obj && obj->renameAllowed) {
+ 
+@@ -2456,8 +2487,8 @@ int yaffs_RenameObject(yaffs_Object * ol
+ 
+ 		existingTarget = yaffs_FindObjectByName(newDir, newName);
+ 		if (existingTarget &&
+-		    existingTarget->variantType == YAFFS_OBJECT_TYPE_DIRECTORY &&
+-		    !list_empty(&existingTarget->variant.directoryVariant.children)) {
++			existingTarget->variantType == YAFFS_OBJECT_TYPE_DIRECTORY &&
++			!ylist_empty(&existingTarget->variant.directoryVariant.children)) {
+ 			/* There is a target that is a non-empty directory, so we fail */
+ 			return YAFFS_FAIL;	/* EEXIST or ENOTEMPTY */
+ 		} else if (existingTarget && existingTarget != obj) {
+@@ -2465,7 +2496,7 @@ int yaffs_RenameObject(yaffs_Object * ol
+ 			 * but only if it isn't the same object
+ 			 */
+ 			yaffs_ChangeObjectName(obj, newDir, newName, force,
+-					       existingTarget->objectId);
++						existingTarget->objectId);
+ 			yaffs_UnlinkObject(existingTarget);
+ 		}
+ 
+@@ -2476,7 +2507,7 @@ int yaffs_RenameObject(yaffs_Object * ol
+ 
+ /*------------------------- Block Management and Page Allocation ----------------*/
+ 
+-static int yaffs_InitialiseBlocks(yaffs_Device * dev)
++static int yaffs_InitialiseBlocks(yaffs_Device *dev)
+ {
+ 	int nBlocks = dev->internalEndBlock - dev->internalStartBlock + 1;
+ 
+@@ -2487,23 +2518,20 @@ static int yaffs_InitialiseBlocks(yaffs_
+ 
+ 	/* If the first allocation strategy fails, thry the alternate one */
+ 	dev->blockInfo = YMALLOC(nBlocks * sizeof(yaffs_BlockInfo));
+-	if(!dev->blockInfo){
++	if (!dev->blockInfo) {
+ 		dev->blockInfo = YMALLOC_ALT(nBlocks * sizeof(yaffs_BlockInfo));
+ 		dev->blockInfoAlt = 1;
+-	}
+-	else
++	} else
+ 		dev->blockInfoAlt = 0;
+ 
+-	if(dev->blockInfo){
+-
++	if (dev->blockInfo) {
+ 		/* Set up dynamic blockinfo stuff. */
+ 		dev->chunkBitmapStride = (dev->nChunksPerBlock + 7) / 8; /* round up bytes */
+ 		dev->chunkBits = YMALLOC(dev->chunkBitmapStride * nBlocks);
+-		if(!dev->chunkBits){
++		if (!dev->chunkBits) {
+ 			dev->chunkBits = YMALLOC_ALT(dev->chunkBitmapStride * nBlocks);
+ 			dev->chunkBitsAlt = 1;
+-		}
+-		else
++		} else
+ 			dev->chunkBitsAlt = 0;
+ 	}
+ 
+@@ -2514,30 +2542,29 @@ static int yaffs_InitialiseBlocks(yaffs_
+ 	}
+ 
+ 	return YAFFS_FAIL;
+-
+ }
+ 
+-static void yaffs_DeinitialiseBlocks(yaffs_Device * dev)
++static void yaffs_DeinitialiseBlocks(yaffs_Device *dev)
+ {
+-	if(dev->blockInfoAlt && dev->blockInfo)
++	if (dev->blockInfoAlt && dev->blockInfo)
+ 		YFREE_ALT(dev->blockInfo);
+-	else if(dev->blockInfo)
++	else if (dev->blockInfo)
+ 		YFREE(dev->blockInfo);
+ 
+ 	dev->blockInfoAlt = 0;
+ 
+ 	dev->blockInfo = NULL;
+ 
+-	if(dev->chunkBitsAlt && dev->chunkBits)
++	if (dev->chunkBitsAlt && dev->chunkBits)
+ 		YFREE_ALT(dev->chunkBits);
+-	else if(dev->chunkBits)
++	else if (dev->chunkBits)
+ 		YFREE(dev->chunkBits);
+ 	dev->chunkBitsAlt = 0;
+ 	dev->chunkBits = NULL;
+ }
+ 
+-static int yaffs_BlockNotDisqualifiedFromGC(yaffs_Device * dev,
+-					    yaffs_BlockInfo * bi)
++static int yaffs_BlockNotDisqualifiedFromGC(yaffs_Device *dev,
++					yaffs_BlockInfo *bi)
+ {
+ 	int i;
+ 	__u32 seq;
+@@ -2556,7 +2583,7 @@ static int yaffs_BlockNotDisqualifiedFro
+ 		seq = dev->sequenceNumber;
+ 
+ 		for (i = dev->internalStartBlock; i <= dev->internalEndBlock;
+-		     i++) {
++				i++) {
+ 			b = yaffs_GetBlockInfo(dev, i);
+ 			if (b->blockState == YAFFS_BLOCK_STATE_FULL &&
+ 			    (b->pagesInUse - b->softDeletions) <
+@@ -2571,38 +2598,36 @@ static int yaffs_BlockNotDisqualifiedFro
+ 	 * discarded pages.
+ 	 */
+ 	return (bi->sequenceNumber <= dev->oldestDirtySequence);
+-
+ }
+ 
+ /* FindDiretiestBlock is used to select the dirtiest block (or close enough)
+  * for garbage collection.
+  */
+ 
+-static int yaffs_FindBlockForGarbageCollection(yaffs_Device * dev,
+-					       int aggressive)
++static int yaffs_FindBlockForGarbageCollection(yaffs_Device *dev,
++					int aggressive)
+ {
+-
+ 	int b = dev->currentDirtyChecker;
+ 
+ 	int i;
+ 	int iterations;
+ 	int dirtiest = -1;
+ 	int pagesInUse = 0;
+-	int prioritised=0;
++	int prioritised = 0;
+ 	yaffs_BlockInfo *bi;
+ 	int pendingPrioritisedExist = 0;
+ 
+ 	/* First let's see if we need to grab a prioritised block */
+-	if(dev->hasPendingPrioritisedGCs){
+-		for(i = dev->internalStartBlock; i < dev->internalEndBlock && !prioritised; i++){
++	if (dev->hasPendingPrioritisedGCs) {
++		for (i = dev->internalStartBlock; i < dev->internalEndBlock && !prioritised; i++) {
+ 
+ 			bi = yaffs_GetBlockInfo(dev, i);
+-			//yaffs_VerifyBlock(dev,bi,i);
++			/* yaffs_VerifyBlock(dev,bi,i); */
+ 
+-			if(bi->gcPrioritise) {
++			if (bi->gcPrioritise) {
+ 				pendingPrioritisedExist = 1;
+-				if(bi->blockState == YAFFS_BLOCK_STATE_FULL &&
+-				   yaffs_BlockNotDisqualifiedFromGC(dev, bi)){
++				if (bi->blockState == YAFFS_BLOCK_STATE_FULL &&
++				   yaffs_BlockNotDisqualifiedFromGC(dev, bi)) {
+ 					pagesInUse = (bi->pagesInUse - bi->softDeletions);
+ 					dirtiest = i;
+ 					prioritised = 1;
+@@ -2611,7 +2636,7 @@ static int yaffs_FindBlockForGarbageColl
+ 			}
+ 		}
+ 
+-		if(!pendingPrioritisedExist) /* None found, so we can clear this */
++		if (!pendingPrioritisedExist) /* None found, so we can clear this */
+ 			dev->hasPendingPrioritisedGCs = 0;
+ 	}
+ 
+@@ -2623,31 +2648,28 @@ static int yaffs_FindBlockForGarbageColl
+ 
+ 	dev->nonAggressiveSkip--;
+ 
+-	if (!aggressive && (dev->nonAggressiveSkip > 0)) {
++	if (!aggressive && (dev->nonAggressiveSkip > 0))
+ 		return -1;
+-	}
+ 
+-	if(!prioritised)
++	if (!prioritised)
+ 		pagesInUse =
+-	    		(aggressive) ? dev->nChunksPerBlock : YAFFS_PASSIVE_GC_CHUNKS + 1;
++			(aggressive) ? dev->nChunksPerBlock : YAFFS_PASSIVE_GC_CHUNKS + 1;
+ 
+-	if (aggressive) {
++	if (aggressive)
+ 		iterations =
+ 		    dev->internalEndBlock - dev->internalStartBlock + 1;
+-	} else {
++	else {
+ 		iterations =
+ 		    dev->internalEndBlock - dev->internalStartBlock + 1;
+ 		iterations = iterations / 16;
+-		if (iterations > 200) {
++		if (iterations > 200)
+ 			iterations = 200;
+-		}
+ 	}
+ 
+ 	for (i = 0; i <= iterations && pagesInUse > 0 && !prioritised; i++) {
+ 		b++;
+-		if (b < dev->internalStartBlock || b > dev->internalEndBlock) {
++		if (b < dev->internalStartBlock || b > dev->internalEndBlock)
+ 			b = dev->internalStartBlock;
+-		}
+ 
+ 		if (b < dev->internalStartBlock || b > dev->internalEndBlock) {
+ 			T(YAFFS_TRACE_ERROR,
+@@ -2657,17 +2679,9 @@ static int yaffs_FindBlockForGarbageColl
+ 
+ 		bi = yaffs_GetBlockInfo(dev, b);
+ 
+-#if 0
+-		if (bi->blockState == YAFFS_BLOCK_STATE_CHECKPOINT) {
+-			dirtiest = b;
+-			pagesInUse = 0;
+-		}
+-		else
+-#endif
+-
+ 		if (bi->blockState == YAFFS_BLOCK_STATE_FULL &&
+-		       (bi->pagesInUse - bi->softDeletions) < pagesInUse &&
+-		        yaffs_BlockNotDisqualifiedFromGC(dev, bi)) {
++			(bi->pagesInUse - bi->softDeletions) < pagesInUse &&
++				yaffs_BlockNotDisqualifiedFromGC(dev, bi)) {
+ 			dirtiest = b;
+ 			pagesInUse = (bi->pagesInUse - bi->softDeletions);
+ 		}
+@@ -2678,19 +2692,18 @@ static int yaffs_FindBlockForGarbageColl
+ 	if (dirtiest > 0) {
+ 		T(YAFFS_TRACE_GC,
+ 		  (TSTR("GC Selected block %d with %d free, prioritised:%d" TENDSTR), dirtiest,
+-		   dev->nChunksPerBlock - pagesInUse,prioritised));
++		   dev->nChunksPerBlock - pagesInUse, prioritised));
+ 	}
+ 
+ 	dev->oldestDirtySequence = 0;
+ 
+-	if (dirtiest > 0) {
++	if (dirtiest > 0)
+ 		dev->nonAggressiveSkip = 4;
+-	}
+ 
+ 	return dirtiest;
+ }
+ 
+-static void yaffs_BlockBecameDirty(yaffs_Device * dev, int blockNo)
++static void yaffs_BlockBecameDirty(yaffs_Device *dev, int blockNo)
+ {
+ 	yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, blockNo);
+ 
+@@ -2752,7 +2765,7 @@ static void yaffs_BlockBecameDirty(yaffs
+ 	}
+ }
+ 
+-static int yaffs_FindBlockForAllocation(yaffs_Device * dev)
++static int yaffs_FindBlockForAllocation(yaffs_Device *dev)
+ {
+ 	int i;
+ 
+@@ -2763,7 +2776,7 @@ static int yaffs_FindBlockForAllocation(
+ 		 * Can't get space to gc
+ 		 */
+ 		T(YAFFS_TRACE_ERROR,
+-		  (TSTR("yaffs tragedy: no more eraased blocks" TENDSTR)));
++		  (TSTR("yaffs tragedy: no more erased blocks" TENDSTR)));
+ 
+ 		return -1;
+ 	}
+@@ -2794,31 +2807,74 @@ static int yaffs_FindBlockForAllocation(
+ 
+ 	T(YAFFS_TRACE_ALWAYS,
+ 	  (TSTR
+-	   ("yaffs tragedy: no more eraased blocks, but there should have been %d"
++	   ("yaffs tragedy: no more erased blocks, but there should have been %d"
+ 	    TENDSTR), dev->nErasedBlocks));
+ 
+ 	return -1;
+ }
+ 
+ 
+-// Check if there's space to allocate...
+-// Thinks.... do we need top make this ths same as yaffs_GetFreeChunks()?
+-static int yaffs_CheckSpaceForAllocation(yaffs_Device * dev)
++
++static int yaffs_CalcCheckpointBlocksRequired(yaffs_Device *dev)
++{
++	if (!dev->nCheckpointBlocksRequired &&
++	   dev->isYaffs2) {
++		/* Not a valid value so recalculate */
++		int nBytes = 0;
++		int nBlocks;
++		int devBlocks = (dev->endBlock - dev->startBlock + 1);
++		int tnodeSize;
++
++		tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
++
++		if (tnodeSize < sizeof(yaffs_Tnode))
++			tnodeSize = sizeof(yaffs_Tnode);
++
++		nBytes += sizeof(yaffs_CheckpointValidity);
++		nBytes += sizeof(yaffs_CheckpointDevice);
++		nBytes += devBlocks * sizeof(yaffs_BlockInfo);
++		nBytes += devBlocks * dev->chunkBitmapStride;
++		nBytes += (sizeof(yaffs_CheckpointObject) + sizeof(__u32)) * (dev->nObjectsCreated - dev->nFreeObjects);
++		nBytes += (tnodeSize + sizeof(__u32)) * (dev->nTnodesCreated - dev->nFreeTnodes);
++		nBytes += sizeof(yaffs_CheckpointValidity);
++		nBytes += sizeof(__u32); /* checksum*/
++
++		/* Round up and add 2 blocks to allow for some bad blocks, so add 3 */
++
++		nBlocks = (nBytes/(dev->nDataBytesPerChunk * dev->nChunksPerBlock)) + 3;
++
++		dev->nCheckpointBlocksRequired = nBlocks;
++	}
++
++	return dev->nCheckpointBlocksRequired;
++}
++
++/*
++ * Check if there's space to allocate...
++ * Thinks.... do we need top make this ths same as yaffs_GetFreeChunks()?
++ */
++static int yaffs_CheckSpaceForAllocation(yaffs_Device *dev)
+ {
+ 	int reservedChunks;
+ 	int reservedBlocks = dev->nReservedBlocks;
+ 	int checkpointBlocks;
+ 
+-	checkpointBlocks =  dev->nCheckpointReservedBlocks - dev->blocksInCheckpoint;
+-	if(checkpointBlocks < 0)
++	if (dev->isYaffs2) {
++		checkpointBlocks =  yaffs_CalcCheckpointBlocksRequired(dev) -
++				    dev->blocksInCheckpoint;
++		if (checkpointBlocks < 0)
++			checkpointBlocks = 0;
++	} else {
+ 		checkpointBlocks = 0;
++	}
+ 
+ 	reservedChunks = ((reservedBlocks + checkpointBlocks) * dev->nChunksPerBlock);
+ 
+ 	return (dev->nFreeChunks > reservedChunks);
+ }
+ 
+-static int yaffs_AllocateChunk(yaffs_Device * dev, int useReserve, yaffs_BlockInfo **blockUsedPtr)
++static int yaffs_AllocateChunk(yaffs_Device *dev, int useReserve,
++		yaffs_BlockInfo **blockUsedPtr)
+ {
+ 	int retVal;
+ 	yaffs_BlockInfo *bi;
+@@ -2835,7 +2891,7 @@ static int yaffs_AllocateChunk(yaffs_Dev
+ 	}
+ 
+ 	if (dev->nErasedBlocks < dev->nReservedBlocks
+-	    && dev->allocationPage == 0) {
++			&& dev->allocationPage == 0) {
+ 		T(YAFFS_TRACE_ALLOCATE, (TSTR("Allocating reserve" TENDSTR)));
+ 	}
+ 
+@@ -2844,10 +2900,10 @@ static int yaffs_AllocateChunk(yaffs_Dev
+ 		bi = yaffs_GetBlockInfo(dev, dev->allocationBlock);
+ 
+ 		retVal = (dev->allocationBlock * dev->nChunksPerBlock) +
+-		    dev->allocationPage;
++			dev->allocationPage;
+ 		bi->pagesInUse++;
+ 		yaffs_SetChunkBit(dev, dev->allocationBlock,
+-				  dev->allocationPage);
++				dev->allocationPage);
+ 
+ 		dev->allocationPage++;
+ 
+@@ -2859,43 +2915,43 @@ static int yaffs_AllocateChunk(yaffs_Dev
+ 			dev->allocationBlock = -1;
+ 		}
+ 
+-		if(blockUsedPtr)
++		if (blockUsedPtr)
+ 			*blockUsedPtr = bi;
+ 
+ 		return retVal;
+ 	}
+ 
+ 	T(YAFFS_TRACE_ERROR,
+-	  (TSTR("!!!!!!!!! Allocator out !!!!!!!!!!!!!!!!!" TENDSTR)));
++			(TSTR("!!!!!!!!! Allocator out !!!!!!!!!!!!!!!!!" TENDSTR)));
+ 
+ 	return -1;
+ }
+ 
+-static int yaffs_GetErasedChunks(yaffs_Device * dev)
++static int yaffs_GetErasedChunks(yaffs_Device *dev)
+ {
+ 	int n;
+ 
+ 	n = dev->nErasedBlocks * dev->nChunksPerBlock;
+ 
+-	if (dev->allocationBlock > 0) {
++	if (dev->allocationBlock > 0)
+ 		n += (dev->nChunksPerBlock - dev->allocationPage);
+-	}
+ 
+ 	return n;
+ 
+ }
+ 
+-static int yaffs_GarbageCollectBlock(yaffs_Device * dev, int block)
++static int yaffs_GarbageCollectBlock(yaffs_Device *dev, int block,
++		int wholeBlock)
+ {
+ 	int oldChunk;
+ 	int newChunk;
+-	int chunkInBlock;
+ 	int markNAND;
+ 	int retVal = YAFFS_OK;
+ 	int cleanups = 0;
+ 	int i;
+ 	int isCheckpointBlock;
+ 	int matchingChunk;
++	int maxCopies;
+ 
+ 	int chunksBefore = yaffs_GetErasedChunks(dev);
+ 	int chunksAfter;
+@@ -2911,8 +2967,11 @@ static int yaffs_GarbageCollectBlock(yaf
+ 	bi->blockState = YAFFS_BLOCK_STATE_COLLECTING;
+ 
+ 	T(YAFFS_TRACE_TRACING,
+-	  (TSTR("Collecting block %d, in use %d, shrink %d, " TENDSTR), block,
+-	   bi->pagesInUse, bi->hasShrinkHeader));
++			(TSTR("Collecting block %d, in use %d, shrink %d, wholeBlock %d" TENDSTR),
++			 block,
++			 bi->pagesInUse,
++			 bi->hasShrinkHeader,
++			 wholeBlock));
+ 
+ 	/*yaffs_VerifyFreeChunks(dev); */
+ 
+@@ -2926,26 +2985,33 @@ static int yaffs_GarbageCollectBlock(yaf
+ 	dev->isDoingGC = 1;
+ 
+ 	if (isCheckpointBlock ||
+-	    !yaffs_StillSomeChunkBits(dev, block)) {
++			!yaffs_StillSomeChunkBits(dev, block)) {
+ 		T(YAFFS_TRACE_TRACING,
+-		  (TSTR
+-		   ("Collecting block %d that has no chunks in use" TENDSTR),
+-		   block));
++				(TSTR
++				 ("Collecting block %d that has no chunks in use" TENDSTR),
++				 block));
+ 		yaffs_BlockBecameDirty(dev, block);
+ 	} else {
+ 
+ 		__u8 *buffer = yaffs_GetTempBuffer(dev, __LINE__);
+ 
+-		yaffs_VerifyBlock(dev,bi,block);
++		yaffs_VerifyBlock(dev, bi, block);
+ 
+-		for (chunkInBlock = 0, oldChunk = block * dev->nChunksPerBlock;
+-		     chunkInBlock < dev->nChunksPerBlock
+-		     && yaffs_StillSomeChunkBits(dev, block);
+-		     chunkInBlock++, oldChunk++) {
+-			if (yaffs_CheckChunkBit(dev, block, chunkInBlock)) {
++		maxCopies = (wholeBlock) ? dev->nChunksPerBlock : 10;
++		oldChunk = block * dev->nChunksPerBlock + dev->gcChunk;
++
++		for (/* init already done */;
++		     retVal == YAFFS_OK &&
++		     dev->gcChunk < dev->nChunksPerBlock &&
++		     (bi->blockState == YAFFS_BLOCK_STATE_COLLECTING) &&
++		     maxCopies > 0;
++		     dev->gcChunk++, oldChunk++) {
++			if (yaffs_CheckChunkBit(dev, block, dev->gcChunk)) {
+ 
+ 				/* This page is in use and might need to be copied off */
+ 
++				maxCopies--;
++
+ 				markNAND = 1;
+ 
+ 				yaffs_InitialiseTags(&tags);
+@@ -2959,22 +3025,22 @@ static int yaffs_GarbageCollectBlock(yaf
+ 
+ 				T(YAFFS_TRACE_GC_DETAIL,
+ 				  (TSTR
+-				   ("Collecting page %d, %d %d %d " TENDSTR),
+-				   chunkInBlock, tags.objectId, tags.chunkId,
++				   ("Collecting chunk in block %d, %d %d %d " TENDSTR),
++				   dev->gcChunk, tags.objectId, tags.chunkId,
+ 				   tags.byteCount));
+ 
+-				if(object && !yaffs_SkipVerification(dev)){
+-					if(tags.chunkId == 0)
+-						matchingChunk = object->chunkId;
+-					else if(object->softDeleted)
++				if (object && !yaffs_SkipVerification(dev)) {
++					if (tags.chunkId == 0)
++						matchingChunk = object->hdrChunk;
++					else if (object->softDeleted)
+ 						matchingChunk = oldChunk; /* Defeat the test */
+ 					else
+-						matchingChunk = yaffs_FindChunkInFile(object,tags.chunkId,NULL);
++						matchingChunk = yaffs_FindChunkInFile(object, tags.chunkId, NULL);
+ 
+-					if(oldChunk != matchingChunk)
++					if (oldChunk != matchingChunk)
+ 						T(YAFFS_TRACE_ERROR,
+ 						  (TSTR("gc: page in gc mismatch: %d %d %d %d"TENDSTR),
+-						  oldChunk,matchingChunk,tags.objectId, tags.chunkId));
++						  oldChunk, matchingChunk, tags.objectId, tags.chunkId));
+ 
+ 				}
+ 
+@@ -2986,9 +3052,11 @@ static int yaffs_GarbageCollectBlock(yaf
+ 					    tags.objectId, tags.chunkId, tags.byteCount));
+ 				}
+ 
+-				if (object && object->deleted
+-				    && tags.chunkId != 0) {
+-					/* Data chunk in a deleted file, throw it away
++				if (object &&
++				    object->deleted &&
++				    object->softDeleted &&
++				    tags.chunkId != 0) {
++					/* Data chunk in a soft deleted file, throw it away
+ 					 * It's a soft deleted data chunk,
+ 					 * No need to copy this, just forget about it and
+ 					 * fix up the object.
+@@ -3003,13 +3071,12 @@ static int yaffs_GarbageCollectBlock(yaf
+ 						cleanups++;
+ 					}
+ 					markNAND = 0;
+-				} else if (0
+-					   /* Todo object && object->deleted && object->nDataChunks == 0 */
+-					   ) {
++				} else if (0) {
++					/* Todo object && object->deleted && object->nDataChunks == 0 */
+ 					/* Deleted object header with no data chunks.
+ 					 * Can be discarded and the file deleted.
+ 					 */
+-					object->chunkId = 0;
++					object->hdrChunk = 0;
+ 					yaffs_FreeTnode(object->myDev,
+ 							object->variant.
+ 							fileVariant.top);
+@@ -3031,17 +3098,14 @@ static int yaffs_GarbageCollectBlock(yaf
+ 						 * We need to nuke the shrinkheader flags first
+ 						 * We no longer want the shrinkHeader flag since its work is done
+ 						 * and if it is left in place it will mess up scanning.
+-						 * Also, clear out any shadowing stuff
+ 						 */
+ 
+ 						yaffs_ObjectHeader *oh;
+ 						oh = (yaffs_ObjectHeader *)buffer;
+ 						oh->isShrink = 0;
+-						oh->shadowsObject = -1;
+-						tags.extraShadows = 0;
+ 						tags.extraIsShrinkHeader = 0;
+ 
+-						yaffs_VerifyObjectHeader(object,oh,&tags,1);
++						yaffs_VerifyObjectHeader(object, oh, &tags, 1);
+ 					}
+ 
+ 					newChunk =
+@@ -3055,7 +3119,7 @@ static int yaffs_GarbageCollectBlock(yaf
+ 
+ 						if (tags.chunkId == 0) {
+ 							/* It's a header */
+-							object->chunkId =  newChunk;
++							object->hdrChunk =  newChunk;
+ 							object->serial =   tags.serialNumber;
+ 						} else {
+ 							/* It's a data chunk */
+@@ -3067,7 +3131,8 @@ static int yaffs_GarbageCollectBlock(yaf
+ 					}
+ 				}
+ 
+-				yaffs_DeleteChunk(dev, oldChunk, markNAND, __LINE__);
++				if (retVal == YAFFS_OK)
++					yaffs_DeleteChunk(dev, oldChunk, markNAND, __LINE__);
+ 
+ 			}
+ 		}
+@@ -3098,18 +3163,25 @@ static int yaffs_GarbageCollectBlock(yaf
+ 
+ 	}
+ 
+-	yaffs_VerifyCollectedBlock(dev,bi,block);
++	yaffs_VerifyCollectedBlock(dev, bi, block);
+ 
+-	if (chunksBefore >= (chunksAfter = yaffs_GetErasedChunks(dev))) {
++	chunksAfter = yaffs_GetErasedChunks(dev);
++	if (chunksBefore >= chunksAfter) {
+ 		T(YAFFS_TRACE_GC,
+ 		  (TSTR
+ 		   ("gc did not increase free chunks before %d after %d"
+ 		    TENDSTR), chunksBefore, chunksAfter));
+ 	}
+ 
++	/* If the gc completed then clear the current gcBlock so that we find another. */
++	if (bi->blockState != YAFFS_BLOCK_STATE_COLLECTING) {
++		dev->gcBlock = -1;
++		dev->gcChunk = 0;
++	}
++
+ 	dev->isDoingGC = 0;
+ 
+-	return YAFFS_OK;
++	return retVal;
+ }
+ 
+ /* New garbage collector
+@@ -3121,7 +3193,7 @@ static int yaffs_GarbageCollectBlock(yaf
+  * The idea is to help clear out space in a more spread-out manner.
+  * Dunno if it really does anything useful.
+  */
+-static int yaffs_CheckGarbageCollection(yaffs_Device * dev)
++static int yaffs_CheckGarbageCollection(yaffs_Device *dev)
+ {
+ 	int block;
+ 	int aggressive;
+@@ -3142,8 +3214,8 @@ static int yaffs_CheckGarbageCollection(
+ 	do {
+ 		maxTries++;
+ 
+-		checkpointBlockAdjust = (dev->nCheckpointReservedBlocks - dev->blocksInCheckpoint);
+-		if(checkpointBlockAdjust < 0)
++		checkpointBlockAdjust = yaffs_CalcCheckpointBlocksRequired(dev) - dev->blocksInCheckpoint;
++		if (checkpointBlockAdjust < 0)
+ 			checkpointBlockAdjust = 0;
+ 
+ 		if (dev->nErasedBlocks < (dev->nReservedBlocks + checkpointBlockAdjust + 2)) {
+@@ -3154,20 +3226,24 @@ static int yaffs_CheckGarbageCollection(
+ 			aggressive = 0;
+ 		}
+ 
+-		block = yaffs_FindBlockForGarbageCollection(dev, aggressive);
++		if (dev->gcBlock <= 0) {
++			dev->gcBlock = yaffs_FindBlockForGarbageCollection(dev, aggressive);
++			dev->gcChunk = 0;
++		}
++
++		block = dev->gcBlock;
+ 
+ 		if (block > 0) {
+ 			dev->garbageCollections++;
+-			if (!aggressive) {
++			if (!aggressive)
+ 				dev->passiveGarbageCollections++;
+-			}
+ 
+ 			T(YAFFS_TRACE_GC,
+ 			  (TSTR
+ 			   ("yaffs: GC erasedBlocks %d aggressive %d" TENDSTR),
+ 			   dev->nErasedBlocks, aggressive));
+ 
+-			gcOk = yaffs_GarbageCollectBlock(dev, block);
++			gcOk = yaffs_GarbageCollectBlock(dev, block, aggressive);
+ 		}
+ 
+ 		if (dev->nErasedBlocks < (dev->nReservedBlocks) && block > 0) {
+@@ -3176,15 +3252,16 @@ static int yaffs_CheckGarbageCollection(
+ 			   ("yaffs: GC !!!no reclaim!!! erasedBlocks %d after try %d block %d"
+ 			    TENDSTR), dev->nErasedBlocks, maxTries, block));
+ 		}
+-	} while ((dev->nErasedBlocks < dev->nReservedBlocks) && (block > 0)
+-		 && (maxTries < 2));
++	} while ((dev->nErasedBlocks < dev->nReservedBlocks) &&
++		 (block > 0) &&
++		 (maxTries < 2));
+ 
+ 	return aggressive ? gcOk : YAFFS_OK;
+ }
+ 
+ /*-------------------------  TAGS --------------------------------*/
+ 
+-static int yaffs_TagsMatch(const yaffs_ExtendedTags * tags, int objectId,
++static int yaffs_TagsMatch(const yaffs_ExtendedTags *tags, int objectId,
+ 			   int chunkInObject)
+ {
+ 	return (tags->chunkId == chunkInObject &&
+@@ -3195,8 +3272,8 @@ static int yaffs_TagsMatch(const yaffs_E
+ 
+ /*-------------------- Data file manipulation -----------------*/
+ 
+-static int yaffs_FindChunkInFile(yaffs_Object * in, int chunkInInode,
+-				 yaffs_ExtendedTags * tags)
++static int yaffs_FindChunkInFile(yaffs_Object *in, int chunkInInode,
++				 yaffs_ExtendedTags *tags)
+ {
+ 	/*Get the Tnode, then get the level 0 offset chunk offset */
+ 	yaffs_Tnode *tn;
+@@ -3214,7 +3291,7 @@ static int yaffs_FindChunkInFile(yaffs_O
+ 	tn = yaffs_FindLevel0Tnode(dev, &in->variant.fileVariant, chunkInInode);
+ 
+ 	if (tn) {
+-		theChunk = yaffs_GetChunkGroupBase(dev,tn,chunkInInode);
++		theChunk = yaffs_GetChunkGroupBase(dev, tn, chunkInInode);
+ 
+ 		retVal =
+ 		    yaffs_FindChunkInGroup(dev, theChunk, tags, in->objectId,
+@@ -3223,8 +3300,8 @@ static int yaffs_FindChunkInFile(yaffs_O
+ 	return retVal;
+ }
+ 
+-static int yaffs_FindAndDeleteChunkInFile(yaffs_Object * in, int chunkInInode,
+-					  yaffs_ExtendedTags * tags)
++static int yaffs_FindAndDeleteChunkInFile(yaffs_Object *in, int chunkInInode,
++					  yaffs_ExtendedTags *tags)
+ {
+ 	/* Get the Tnode, then get the level 0 offset chunk offset */
+ 	yaffs_Tnode *tn;
+@@ -3243,29 +3320,23 @@ static int yaffs_FindAndDeleteChunkInFil
+ 
+ 	if (tn) {
+ 
+-		theChunk = yaffs_GetChunkGroupBase(dev,tn,chunkInInode);
++		theChunk = yaffs_GetChunkGroupBase(dev, tn, chunkInInode);
+ 
+ 		retVal =
+ 		    yaffs_FindChunkInGroup(dev, theChunk, tags, in->objectId,
+ 					   chunkInInode);
+ 
+ 		/* Delete the entry in the filestructure (if found) */
+-		if (retVal != -1) {
+-			yaffs_PutLevel0Tnode(dev,tn,chunkInInode,0);
+-		}
+-	} else {
+-		/*T(("No level 0 found for %d\n", chunkInInode)); */
++		if (retVal != -1)
++			yaffs_PutLevel0Tnode(dev, tn, chunkInInode, 0);
+ 	}
+ 
+-	if (retVal == -1) {
+-		/* T(("Could not find %d to delete\n",chunkInInode)); */
+-	}
+ 	return retVal;
+ }
+ 
+ #ifdef YAFFS_PARANOID
+ 
+-static int yaffs_CheckFileSanity(yaffs_Object * in)
++static int yaffs_CheckFileSanity(yaffs_Object *in)
+ {
+ 	int chunk;
+ 	int nChunks;
+@@ -3278,10 +3349,8 @@ static int yaffs_CheckFileSanity(yaffs_O
+ 	int theChunk;
+ 	int chunkDeleted;
+ 
+-	if (in->variantType != YAFFS_OBJECT_TYPE_FILE) {
+-		/* T(("Object not a file\n")); */
++	if (in->variantType != YAFFS_OBJECT_TYPE_FILE)
+ 		return YAFFS_FAIL;
+-	}
+ 
+ 	objId = in->objectId;
+ 	fSize = in->variant.fileVariant.fileSize;
+@@ -3294,7 +3363,7 @@ static int yaffs_CheckFileSanity(yaffs_O
+ 
+ 		if (tn) {
+ 
+-			theChunk = yaffs_GetChunkGroupBase(dev,tn,chunk);
++			theChunk = yaffs_GetChunkGroupBase(dev, tn, chunk);
+ 
+ 			if (yaffs_CheckChunkBits
+ 			    (dev, theChunk / dev->nChunksPerBlock,
+@@ -3323,7 +3392,7 @@ static int yaffs_CheckFileSanity(yaffs_O
+ 
+ #endif
+ 
+-static int yaffs_PutChunkIntoFile(yaffs_Object * in, int chunkInInode,
++static int yaffs_PutChunkIntoFile(yaffs_Object *in, int chunkInInode,
+ 				  int chunkInNAND, int inScan)
+ {
+ 	/* NB inScan is zero unless scanning.
+@@ -3358,11 +3427,10 @@ static int yaffs_PutChunkIntoFile(yaffs_
+ 					&in->variant.fileVariant,
+ 					chunkInInode,
+ 					NULL);
+-	if (!tn) {
++	if (!tn)
+ 		return YAFFS_FAIL;
+-	}
+ 
+-	existingChunk = yaffs_GetChunkGroupBase(dev,tn,chunkInInode);
++	existingChunk = yaffs_GetChunkGroupBase(dev, tn, chunkInInode);
+ 
+ 	if (inScan != 0) {
+ 		/* If we're scanning then we need to test for duplicates
+@@ -3374,7 +3442,7 @@ static int yaffs_PutChunkIntoFile(yaffs_
+ 		 * Update: For backward scanning we don't need to re-read tags so this is quite cheap.
+ 		 */
+ 
+-		if (existingChunk != 0) {
++		if (existingChunk > 0) {
+ 			/* NB Right now existing chunk will not be real chunkId if the device >= 32MB
+ 			 *    thus we have to do a FindChunkInFile to get the real chunk id.
+ 			 *
+@@ -3411,8 +3479,10 @@ static int yaffs_PutChunkIntoFile(yaffs_
+ 			 * not be loaded during a scan
+ 			 */
+ 
+-			newSerial = newTags.serialNumber;
+-			existingSerial = existingTags.serialNumber;
++			if (inScan > 0) {
++				newSerial = newTags.serialNumber;
++				existingSerial = existingTags.serialNumber;
++			}
+ 
+ 			if ((inScan > 0) &&
+ 			    (in->myDev->isYaffs2 ||
+@@ -3437,24 +3507,23 @@ static int yaffs_PutChunkIntoFile(yaffs_
+ 
+ 	}
+ 
+-	if (existingChunk == 0) {
++	if (existingChunk == 0)
+ 		in->nDataChunks++;
+-	}
+ 
+-	yaffs_PutLevel0Tnode(dev,tn,chunkInInode,chunkInNAND);
++	yaffs_PutLevel0Tnode(dev, tn, chunkInInode, chunkInNAND);
+ 
+ 	return YAFFS_OK;
+ }
+ 
+-static int yaffs_ReadChunkDataFromObject(yaffs_Object * in, int chunkInInode,
+-					 __u8 * buffer)
++static int yaffs_ReadChunkDataFromObject(yaffs_Object *in, int chunkInInode,
++					__u8 *buffer)
+ {
+ 	int chunkInNAND = yaffs_FindChunkInFile(in, chunkInInode, NULL);
+ 
+-	if (chunkInNAND >= 0) {
++	if (chunkInNAND >= 0)
+ 		return yaffs_ReadChunkWithTagsFromNAND(in->myDev, chunkInNAND,
+-						       buffer,NULL);
+-	} else {
++						buffer, NULL);
++	else {
+ 		T(YAFFS_TRACE_NANDACCESS,
+ 		  (TSTR("Chunk %d not found zero instead" TENDSTR),
+ 		   chunkInNAND));
+@@ -3465,7 +3534,7 @@ static int yaffs_ReadChunkDataFromObject
+ 
+ }
+ 
+-void yaffs_DeleteChunk(yaffs_Device * dev, int chunkId, int markNAND, int lyn)
++void yaffs_DeleteChunk(yaffs_Device *dev, int chunkId, int markNAND, int lyn)
+ {
+ 	int block;
+ 	int page;
+@@ -3475,16 +3544,15 @@ void yaffs_DeleteChunk(yaffs_Device * de
+ 	if (chunkId <= 0)
+ 		return;
+ 
+-
+ 	dev->nDeletions++;
+ 	block = chunkId / dev->nChunksPerBlock;
+ 	page = chunkId % dev->nChunksPerBlock;
+ 
+ 
+-	if(!yaffs_CheckChunkBit(dev,block,page))
++	if (!yaffs_CheckChunkBit(dev, block, page))
+ 		T(YAFFS_TRACE_VERIFY,
+-		 	(TSTR("Deleting invalid chunk %d"TENDSTR),
+-		 	 chunkId));
++			(TSTR("Deleting invalid chunk %d"TENDSTR),
++			 chunkId));
+ 
+ 	bi = yaffs_GetBlockInfo(dev, block);
+ 
+@@ -3524,14 +3592,12 @@ void yaffs_DeleteChunk(yaffs_Device * de
+ 			yaffs_BlockBecameDirty(dev, block);
+ 		}
+ 
+-	} else {
+-		/* T(("Bad news deleting chunk %d\n",chunkId)); */
+ 	}
+ 
+ }
+ 
+-static int yaffs_WriteChunkDataToObject(yaffs_Object * in, int chunkInInode,
+-					const __u8 * buffer, int nBytes,
++static int yaffs_WriteChunkDataToObject(yaffs_Object *in, int chunkInInode,
++					const __u8 *buffer, int nBytes,
+ 					int useReserve)
+ {
+ 	/* Find old chunk Need to do this to get serial number
+@@ -3561,6 +3627,12 @@ static int yaffs_WriteChunkDataToObject(
+ 	    (prevChunkId >= 0) ? prevTags.serialNumber + 1 : 1;
+ 	newTags.byteCount = nBytes;
+ 
++	if (nBytes < 1 || nBytes > dev->totalBytesPerChunk) {
++		T(YAFFS_TRACE_ERROR,
++		(TSTR("Writing %d bytes to chunk!!!!!!!!!" TENDSTR), nBytes));
++		YBUG();
++	}
++
+ 	newChunkId =
+ 	    yaffs_WriteNewChunkWithTagsToNAND(dev, buffer, &newTags,
+ 					      useReserve);
+@@ -3568,11 +3640,9 @@ static int yaffs_WriteChunkDataToObject(
+ 	if (newChunkId >= 0) {
+ 		yaffs_PutChunkIntoFile(in, chunkInInode, newChunkId, 0);
+ 
+-		if (prevChunkId >= 0) {
++		if (prevChunkId >= 0)
+ 			yaffs_DeleteChunk(dev, prevChunkId, 1, __LINE__);
+ 
+-		}
+-
+ 		yaffs_CheckFileSanity(in);
+ 	}
+ 	return newChunkId;
+@@ -3582,7 +3652,7 @@ static int yaffs_WriteChunkDataToObject(
+ /* UpdateObjectHeader updates the header on NAND for an object.
+  * If name is not NULL, then that new name is used.
+  */
+-int yaffs_UpdateObjectHeader(yaffs_Object * in, const YCHAR * name, int force,
++int yaffs_UpdateObjectHeader(yaffs_Object *in, const YCHAR *name, int force,
+ 			     int isShrink, int shadows)
+ {
+ 
+@@ -3603,9 +3673,12 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 
+ 	yaffs_ObjectHeader *oh = NULL;
+ 
+-	yaffs_strcpy(oldName,"silly old name");
++	yaffs_strcpy(oldName, _Y("silly old name"));
+ 
+-	if (!in->fake || force) {
++
++	if (!in->fake ||
++		in == dev->rootDir || /* The rootDir should also be saved */
++		force) {
+ 
+ 		yaffs_CheckGarbageCollection(dev);
+ 		yaffs_CheckObjectDetailsLoaded(in);
+@@ -3613,13 +3686,13 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 		buffer = yaffs_GetTempBuffer(in->myDev, __LINE__);
+ 		oh = (yaffs_ObjectHeader *) buffer;
+ 
+-		prevChunkId = in->chunkId;
++		prevChunkId = in->hdrChunk;
+ 
+-		if (prevChunkId >= 0) {
++		if (prevChunkId > 0) {
+ 			result = yaffs_ReadChunkWithTagsFromNAND(dev, prevChunkId,
+ 							buffer, &oldTags);
+ 
+-			yaffs_VerifyObjectHeader(in,oh,&oldTags,0);
++			yaffs_VerifyObjectHeader(in, oh, &oldTags, 0);
+ 
+ 			memcpy(oldName, oh->name, sizeof(oh->name));
+ 		}
+@@ -3628,7 +3701,7 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 
+ 		oh->type = in->variantType;
+ 		oh->yst_mode = in->yst_mode;
+-		oh->shadowsObject = shadows;
++		oh->shadowsObject = oh->inbandShadowsObject = shadows;
+ 
+ #ifdef CONFIG_YAFFS_WINCE
+ 		oh->win_atime[0] = in->win_atime[0];
+@@ -3645,20 +3718,18 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 		oh->yst_ctime = in->yst_ctime;
+ 		oh->yst_rdev = in->yst_rdev;
+ #endif
+-		if (in->parent) {
++		if (in->parent)
+ 			oh->parentObjectId = in->parent->objectId;
+-		} else {
++		else
+ 			oh->parentObjectId = 0;
+-		}
+ 
+ 		if (name && *name) {
+ 			memset(oh->name, 0, sizeof(oh->name));
+ 			yaffs_strncpy(oh->name, name, YAFFS_MAX_NAME_LENGTH);
+-		} else if (prevChunkId>=0) {
++		} else if (prevChunkId >= 0)
+ 			memcpy(oh->name, oldName, sizeof(oh->name));
+-		} else {
++		else
+ 			memset(oh->name, 0, sizeof(oh->name));
+-		}
+ 
+ 		oh->isShrink = isShrink;
+ 
+@@ -3708,7 +3779,7 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 		newTags.extraShadows = (oh->shadowsObject > 0) ? 1 : 0;
+ 		newTags.extraObjectType = in->variantType;
+ 
+-		yaffs_VerifyObjectHeader(in,oh,&newTags,1);
++		yaffs_VerifyObjectHeader(in, oh, &newTags, 1);
+ 
+ 		/* Create new chunk in NAND */
+ 		newChunkId =
+@@ -3717,20 +3788,20 @@ int yaffs_UpdateObjectHeader(yaffs_Objec
+ 
+ 		if (newChunkId >= 0) {
+ 
+-			in->chunkId = newChunkId;
++			in->hdrChunk = newChunkId;
+ 
+ 			if (prevChunkId >= 0) {
+ 				yaffs_DeleteChunk(dev, prevChunkId, 1,
+ 						  __LINE__);
+ 			}
+ 
+-			if(!yaffs_ObjectHasCachedWriteData(in))
++			if (!yaffs_ObjectHasCachedWriteData(in))
+ 				in->dirty = 0;
+ 
+ 			/* If this was a shrink, then mark the block that the chunk lives on */
+ 			if (isShrink) {
+ 				bi = yaffs_GetBlockInfo(in->myDev,
+-							newChunkId /in->myDev->	nChunksPerBlock);
++					newChunkId / in->myDev->nChunksPerBlock);
+ 				bi->hasShrinkHeader = 1;
+ 			}
+ 
+@@ -3766,7 +3837,7 @@ static int yaffs_ObjectHasCachedWriteDat
+ 	yaffs_ChunkCache *cache;
+ 	int nCaches = obj->myDev->nShortOpCaches;
+ 
+-	for(i = 0; i < nCaches; i++){
++	for (i = 0; i < nCaches; i++) {
+ 		cache = &dev->srCache[i];
+ 		if (cache->object == obj &&
+ 		    cache->dirty)
+@@ -3777,7 +3848,7 @@ static int yaffs_ObjectHasCachedWriteDat
+ }
+ 
+ 
+-static void yaffs_FlushFilesChunkCache(yaffs_Object * obj)
++static void yaffs_FlushFilesChunkCache(yaffs_Object *obj)
+ {
+ 	yaffs_Device *dev = obj->myDev;
+ 	int lowest = -99;	/* Stop compiler whining. */
+@@ -3844,16 +3915,16 @@ void yaffs_FlushEntireDeviceCache(yaffs_
+ 	 */
+ 	do {
+ 		obj = NULL;
+-		for( i = 0; i < nCaches && !obj; i++) {
++		for (i = 0; i < nCaches && !obj; i++) {
+ 			if (dev->srCache[i].object &&
+ 			    dev->srCache[i].dirty)
+ 				obj = dev->srCache[i].object;
+ 
+ 		}
+-		if(obj)
++		if (obj)
+ 			yaffs_FlushFilesChunkCache(obj);
+ 
+-	} while(obj);
++	} while (obj);
+ 
+ }
+ 
+@@ -3863,41 +3934,21 @@ void yaffs_FlushEntireDeviceCache(yaffs_
+  * Then look for the least recently used non-dirty one.
+  * Then look for the least recently used dirty one...., flush and look again.
+  */
+-static yaffs_ChunkCache *yaffs_GrabChunkCacheWorker(yaffs_Device * dev)
++static yaffs_ChunkCache *yaffs_GrabChunkCacheWorker(yaffs_Device *dev)
+ {
+ 	int i;
+-	int usage;
+-	int theOne;
+ 
+ 	if (dev->nShortOpCaches > 0) {
+ 		for (i = 0; i < dev->nShortOpCaches; i++) {
+ 			if (!dev->srCache[i].object)
+ 				return &dev->srCache[i];
+ 		}
++	}
+ 
+-		return NULL;
++	return NULL;
++}
+ 
+-		theOne = -1;
+-		usage = 0;	/* just to stop the compiler grizzling */
+-
+-		for (i = 0; i < dev->nShortOpCaches; i++) {
+-			if (!dev->srCache[i].dirty &&
+-			    ((dev->srCache[i].lastUse < usage && theOne >= 0) ||
+-			     theOne < 0)) {
+-				usage = dev->srCache[i].lastUse;
+-				theOne = i;
+-			}
+-		}
+-
+-
+-		return theOne >= 0 ? &dev->srCache[theOne] : NULL;
+-	} else {
+-		return NULL;
+-	}
+-
+-}
+-
+-static yaffs_ChunkCache *yaffs_GrabChunkCache(yaffs_Device * dev)
++static yaffs_ChunkCache *yaffs_GrabChunkCache(yaffs_Device *dev)
+ {
+ 	yaffs_ChunkCache *cache;
+ 	yaffs_Object *theObj;
+@@ -3927,8 +3978,7 @@ static yaffs_ChunkCache *yaffs_GrabChunk
+ 			for (i = 0; i < dev->nShortOpCaches; i++) {
+ 				if (dev->srCache[i].object &&
+ 				    !dev->srCache[i].locked &&
+-				    (dev->srCache[i].lastUse < usage || !cache))
+-				{
++				    (dev->srCache[i].lastUse < usage || !cache)) {
+ 					usage = dev->srCache[i].lastUse;
+ 					theObj = dev->srCache[i].object;
+ 					cache = &dev->srCache[i];
+@@ -3950,7 +4000,7 @@ static yaffs_ChunkCache *yaffs_GrabChunk
+ }
+ 
+ /* Find a cached chunk */
+-static yaffs_ChunkCache *yaffs_FindChunkCache(const yaffs_Object * obj,
++static yaffs_ChunkCache *yaffs_FindChunkCache(const yaffs_Object *obj,
+ 					      int chunkId)
+ {
+ 	yaffs_Device *dev = obj->myDev;
+@@ -3969,7 +4019,7 @@ static yaffs_ChunkCache *yaffs_FindChunk
+ }
+ 
+ /* Mark the chunk for the least recently used algorithym */
+-static void yaffs_UseChunkCache(yaffs_Device * dev, yaffs_ChunkCache * cache,
++static void yaffs_UseChunkCache(yaffs_Device *dev, yaffs_ChunkCache *cache,
+ 				int isAWrite)
+ {
+ 
+@@ -3977,9 +4027,9 @@ static void yaffs_UseChunkCache(yaffs_De
+ 		if (dev->srLastUse < 0 || dev->srLastUse > 100000000) {
+ 			/* Reset the cache usages */
+ 			int i;
+-			for (i = 1; i < dev->nShortOpCaches; i++) {
++			for (i = 1; i < dev->nShortOpCaches; i++)
+ 				dev->srCache[i].lastUse = 0;
+-			}
++
+ 			dev->srLastUse = 0;
+ 		}
+ 
+@@ -3987,9 +4037,8 @@ static void yaffs_UseChunkCache(yaffs_De
+ 
+ 		cache->lastUse = dev->srLastUse;
+ 
+-		if (isAWrite) {
++		if (isAWrite)
+ 			cache->dirty = 1;
+-		}
+ 	}
+ }
+ 
+@@ -3997,21 +4046,20 @@ static void yaffs_UseChunkCache(yaffs_De
+  * Do this when a whole page gets written,
+  * ie the short cache for this page is no longer valid.
+  */
+-static void yaffs_InvalidateChunkCache(yaffs_Object * object, int chunkId)
++static void yaffs_InvalidateChunkCache(yaffs_Object *object, int chunkId)
+ {
+ 	if (object->myDev->nShortOpCaches > 0) {
+ 		yaffs_ChunkCache *cache = yaffs_FindChunkCache(object, chunkId);
+ 
+-		if (cache) {
++		if (cache)
+ 			cache->object = NULL;
+-		}
+ 	}
+ }
+ 
+ /* Invalidate all the cache pages associated with this object
+  * Do this whenever ther file is deleted or resized.
+  */
+-static void yaffs_InvalidateWholeChunkCache(yaffs_Object * in)
++static void yaffs_InvalidateWholeChunkCache(yaffs_Object *in)
+ {
+ 	int i;
+ 	yaffs_Device *dev = in->myDev;
+@@ -4019,9 +4067,8 @@ static void yaffs_InvalidateWholeChunkCa
+ 	if (dev->nShortOpCaches > 0) {
+ 		/* Invalidate it. */
+ 		for (i = 0; i < dev->nShortOpCaches; i++) {
+-			if (dev->srCache[i].object == in) {
++			if (dev->srCache[i].object == in)
+ 				dev->srCache[i].object = NULL;
+-			}
+ 		}
+ 	}
+ }
+@@ -4029,18 +4076,18 @@ static void yaffs_InvalidateWholeChunkCa
+ /*--------------------- Checkpointing --------------------*/
+ 
+ 
+-static int yaffs_WriteCheckpointValidityMarker(yaffs_Device *dev,int head)
++static int yaffs_WriteCheckpointValidityMarker(yaffs_Device *dev, int head)
+ {
+ 	yaffs_CheckpointValidity cp;
+ 
+-	memset(&cp,0,sizeof(cp));
++	memset(&cp, 0, sizeof(cp));
+ 
+ 	cp.structType = sizeof(cp);
+ 	cp.magic = YAFFS_MAGIC;
+ 	cp.version = YAFFS_CHECKPOINT_VERSION;
+ 	cp.head = (head) ? 1 : 0;
+ 
+-	return (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp))?
++	return (yaffs_CheckpointWrite(dev, &cp, sizeof(cp)) == sizeof(cp)) ?
+ 		1 : 0;
+ }
+ 
+@@ -4049,9 +4096,9 @@ static int yaffs_ReadCheckpointValidityM
+ 	yaffs_CheckpointValidity cp;
+ 	int ok;
+ 
+-	ok = (yaffs_CheckpointRead(dev,&cp,sizeof(cp)) == sizeof(cp));
++	ok = (yaffs_CheckpointRead(dev, &cp, sizeof(cp)) == sizeof(cp));
+ 
+-	if(ok)
++	if (ok)
+ 		ok = (cp.structType == sizeof(cp)) &&
+ 		     (cp.magic == YAFFS_MAGIC) &&
+ 		     (cp.version == YAFFS_CHECKPOINT_VERSION) &&
+@@ -4100,21 +4147,21 @@ static int yaffs_WriteCheckpointDevice(y
+ 	int ok;
+ 
+ 	/* Write device runtime values*/
+-	yaffs_DeviceToCheckpointDevice(&cp,dev);
++	yaffs_DeviceToCheckpointDevice(&cp, dev);
+ 	cp.structType = sizeof(cp);
+ 
+-	ok = (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp));
++	ok = (yaffs_CheckpointWrite(dev, &cp, sizeof(cp)) == sizeof(cp));
+ 
+ 	/* Write block info */
+-	if(ok) {
++	if (ok) {
+ 		nBytes = nBlocks * sizeof(yaffs_BlockInfo);
+-		ok = (yaffs_CheckpointWrite(dev,dev->blockInfo,nBytes) == nBytes);
++		ok = (yaffs_CheckpointWrite(dev, dev->blockInfo, nBytes) == nBytes);
+ 	}
+ 
+ 	/* Write chunk bits */
+-	if(ok) {
++	if (ok) {
+ 		nBytes = nBlocks * dev->chunkBitmapStride;
+-		ok = (yaffs_CheckpointWrite(dev,dev->chunkBits,nBytes) == nBytes);
++		ok = (yaffs_CheckpointWrite(dev, dev->chunkBits, nBytes) == nBytes);
+ 	}
+ 	return	 ok ? 1 : 0;
+ 
+@@ -4128,25 +4175,25 @@ static int yaffs_ReadCheckpointDevice(ya
+ 
+ 	int ok;
+ 
+-	ok = (yaffs_CheckpointRead(dev,&cp,sizeof(cp)) == sizeof(cp));
+-	if(!ok)
++	ok = (yaffs_CheckpointRead(dev, &cp, sizeof(cp)) == sizeof(cp));
++	if (!ok)
+ 		return 0;
+ 
+-	if(cp.structType != sizeof(cp))
++	if (cp.structType != sizeof(cp))
+ 		return 0;
+ 
+ 
+-	yaffs_CheckpointDeviceToDevice(dev,&cp);
++	yaffs_CheckpointDeviceToDevice(dev, &cp);
+ 
+ 	nBytes = nBlocks * sizeof(yaffs_BlockInfo);
+ 
+-	ok = (yaffs_CheckpointRead(dev,dev->blockInfo,nBytes) == nBytes);
++	ok = (yaffs_CheckpointRead(dev, dev->blockInfo, nBytes) == nBytes);
+ 
+-	if(!ok)
++	if (!ok)
+ 		return 0;
+ 	nBytes = nBlocks * dev->chunkBitmapStride;
+ 
+-	ok = (yaffs_CheckpointRead(dev,dev->chunkBits,nBytes) == nBytes);
++	ok = (yaffs_CheckpointRead(dev, dev->chunkBits, nBytes) == nBytes);
+ 
+ 	return ok ? 1 : 0;
+ }
+@@ -4157,7 +4204,7 @@ static void yaffs_ObjectToCheckpointObje
+ 
+ 	cp->objectId = obj->objectId;
+ 	cp->parentId = (obj->parent) ? obj->parent->objectId : 0;
+-	cp->chunkId = obj->chunkId;
++	cp->hdrChunk = obj->hdrChunk;
+ 	cp->variantType = obj->variantType;
+ 	cp->deleted = obj->deleted;
+ 	cp->softDeleted = obj->softDeleted;
+@@ -4168,20 +4215,28 @@ static void yaffs_ObjectToCheckpointObje
+ 	cp->serial = obj->serial;
+ 	cp->nDataChunks = obj->nDataChunks;
+ 
+-	if(obj->variantType == YAFFS_OBJECT_TYPE_FILE)
++	if (obj->variantType == YAFFS_OBJECT_TYPE_FILE)
+ 		cp->fileSizeOrEquivalentObjectId = obj->variant.fileVariant.fileSize;
+-	else if(obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK)
++	else if (obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK)
+ 		cp->fileSizeOrEquivalentObjectId = obj->variant.hardLinkVariant.equivalentObjectId;
+ }
+ 
+-static void yaffs_CheckpointObjectToObject( yaffs_Object *obj,yaffs_CheckpointObject *cp)
++static int yaffs_CheckpointObjectToObject(yaffs_Object *obj, yaffs_CheckpointObject *cp)
+ {
+ 
+ 	yaffs_Object *parent;
+ 
++	if (obj->variantType != cp->variantType) {
++		T(YAFFS_TRACE_ERROR, (TSTR("Checkpoint read object %d type %d "
++			TCONT("chunk %d does not match existing object type %d")
++			TENDSTR), cp->objectId, cp->variantType, cp->hdrChunk,
++			obj->variantType));
++		return 0;
++	}
++
+ 	obj->objectId = cp->objectId;
+ 
+-	if(cp->parentId)
++	if (cp->parentId)
+ 		parent = yaffs_FindOrCreateObjectByNumber(
+ 					obj->myDev,
+ 					cp->parentId,
+@@ -4189,10 +4244,19 @@ static void yaffs_CheckpointObjectToObje
+ 	else
+ 		parent = NULL;
+ 
+-	if(parent)
++	if (parent) {
++		if (parent->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
++			T(YAFFS_TRACE_ALWAYS, (TSTR("Checkpoint read object %d parent %d type %d"
++				TCONT(" chunk %d Parent type, %d, not directory")
++				TENDSTR),
++				cp->objectId, cp->parentId, cp->variantType,
++				cp->hdrChunk, parent->variantType));
++			return 0;
++		}
+ 		yaffs_AddObjectToDirectory(parent, obj);
++	}
+ 
+-	obj->chunkId = cp->chunkId;
++	obj->hdrChunk = cp->hdrChunk;
+ 	obj->variantType = cp->variantType;
+ 	obj->deleted = cp->deleted;
+ 	obj->softDeleted = cp->softDeleted;
+@@ -4203,29 +4267,34 @@ static void yaffs_CheckpointObjectToObje
+ 	obj->serial = cp->serial;
+ 	obj->nDataChunks = cp->nDataChunks;
+ 
+-	if(obj->variantType == YAFFS_OBJECT_TYPE_FILE)
++	if (obj->variantType == YAFFS_OBJECT_TYPE_FILE)
+ 		obj->variant.fileVariant.fileSize = cp->fileSizeOrEquivalentObjectId;
+-	else if(obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK)
++	else if (obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK)
+ 		obj->variant.hardLinkVariant.equivalentObjectId = cp->fileSizeOrEquivalentObjectId;
+ 
+-	if(obj->objectId >= YAFFS_NOBJECT_BUCKETS)
++	if (obj->hdrChunk > 0)
+ 		obj->lazyLoaded = 1;
++	return 1;
+ }
+ 
+ 
+ 
+-static int yaffs_CheckpointTnodeWorker(yaffs_Object * in, yaffs_Tnode * tn,
+-				  	__u32 level, int chunkOffset)
++static int yaffs_CheckpointTnodeWorker(yaffs_Object *in, yaffs_Tnode *tn,
++					__u32 level, int chunkOffset)
+ {
+ 	int i;
+ 	yaffs_Device *dev = in->myDev;
+ 	int ok = 1;
+-	int nTnodeBytes = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
++	int tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
++
++	if (tnodeSize < sizeof(yaffs_Tnode))
++		tnodeSize = sizeof(yaffs_Tnode);
++
+ 
+ 	if (tn) {
+ 		if (level > 0) {
+ 
+-			for (i = 0; i < YAFFS_NTNODES_INTERNAL && ok; i++){
++			for (i = 0; i < YAFFS_NTNODES_INTERNAL && ok; i++) {
+ 				if (tn->internal[i]) {
+ 					ok = yaffs_CheckpointTnodeWorker(in,
+ 							tn->internal[i],
+@@ -4235,10 +4304,9 @@ static int yaffs_CheckpointTnodeWorker(y
+ 			}
+ 		} else if (level == 0) {
+ 			__u32 baseOffset = chunkOffset <<  YAFFS_TNODES_LEVEL0_BITS;
+-			/* printf("write tnode at %d\n",baseOffset); */
+-			ok = (yaffs_CheckpointWrite(dev,&baseOffset,sizeof(baseOffset)) == sizeof(baseOffset));
+-			if(ok)
+-				ok = (yaffs_CheckpointWrite(dev,tn,nTnodeBytes) == nTnodeBytes);
++			ok = (yaffs_CheckpointWrite(dev, &baseOffset, sizeof(baseOffset)) == sizeof(baseOffset));
++			if (ok)
++				ok = (yaffs_CheckpointWrite(dev, tn, tnodeSize) == tnodeSize);
+ 		}
+ 	}
+ 
+@@ -4251,13 +4319,13 @@ static int yaffs_WriteCheckpointTnodes(y
+ 	__u32 endMarker = ~0;
+ 	int ok = 1;
+ 
+-	if(obj->variantType == YAFFS_OBJECT_TYPE_FILE){
++	if (obj->variantType == YAFFS_OBJECT_TYPE_FILE) {
+ 		ok = yaffs_CheckpointTnodeWorker(obj,
+ 					    obj->variant.fileVariant.top,
+ 					    obj->variant.fileVariant.topLevel,
+ 					    0);
+-		if(ok)
+-			ok = (yaffs_CheckpointWrite(obj->myDev,&endMarker,sizeof(endMarker)) ==
++		if (ok)
++			ok = (yaffs_CheckpointWrite(obj->myDev, &endMarker, sizeof(endMarker)) ==
+ 				sizeof(endMarker));
+ 	}
+ 
+@@ -4272,38 +4340,38 @@ static int yaffs_ReadCheckpointTnodes(ya
+ 	yaffs_FileStructure *fileStructPtr = &obj->variant.fileVariant;
+ 	yaffs_Tnode *tn;
+ 	int nread = 0;
++	int tnodeSize = (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8;
+ 
+-	ok = (yaffs_CheckpointRead(dev,&baseChunk,sizeof(baseChunk)) == sizeof(baseChunk));
++	if (tnodeSize < sizeof(yaffs_Tnode))
++		tnodeSize = sizeof(yaffs_Tnode);
+ 
+-	while(ok && (~baseChunk)){
++	ok = (yaffs_CheckpointRead(dev, &baseChunk, sizeof(baseChunk)) == sizeof(baseChunk));
++
++	while (ok && (~baseChunk)) {
+ 		nread++;
+ 		/* Read level 0 tnode */
+ 
+ 
+-		/* printf("read  tnode at %d\n",baseChunk); */
+ 		tn = yaffs_GetTnodeRaw(dev);
+-		if(tn)
+-			ok = (yaffs_CheckpointRead(dev,tn,(dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8) ==
+-			      (dev->tnodeWidth * YAFFS_NTNODES_LEVEL0)/8);
++		if (tn)
++			ok = (yaffs_CheckpointRead(dev, tn, tnodeSize) == tnodeSize);
+ 		else
+ 			ok = 0;
+ 
+-		if(tn && ok){
++		if (tn && ok)
+ 			ok = yaffs_AddOrFindLevel0Tnode(dev,
+-					       		fileStructPtr,
+-					       		baseChunk,
+-					       		tn) ? 1 : 0;
++							fileStructPtr,
++							baseChunk,
++							tn) ? 1 : 0;
+ 
+-		}
+-
+-		if(ok)
+-			ok = (yaffs_CheckpointRead(dev,&baseChunk,sizeof(baseChunk)) == sizeof(baseChunk));
++		if (ok)
++			ok = (yaffs_CheckpointRead(dev, &baseChunk, sizeof(baseChunk)) == sizeof(baseChunk));
+ 
+ 	}
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(
++	T(YAFFS_TRACE_CHECKPOINT, (
+ 		TSTR("Checkpoint read tnodes %d records, last %d. ok %d" TENDSTR),
+-		nread,baseChunk,ok));
++		nread, baseChunk, ok));
+ 
+ 	return ok ? 1 : 0;
+ }
+@@ -4315,41 +4383,40 @@ static int yaffs_WriteCheckpointObjects(
+ 	yaffs_CheckpointObject cp;
+ 	int i;
+ 	int ok = 1;
+-	struct list_head *lh;
++	struct ylist_head *lh;
+ 
+ 
+ 	/* Iterate through the objects in each hash entry,
+ 	 * dumping them to the checkpointing stream.
+ 	 */
+ 
+-	 for(i = 0; ok &&  i <  YAFFS_NOBJECT_BUCKETS; i++){
+-	 	list_for_each(lh, &dev->objectBucket[i].list) {
++	for (i = 0; ok &&  i <  YAFFS_NOBJECT_BUCKETS; i++) {
++		ylist_for_each(lh, &dev->objectBucket[i].list) {
+ 			if (lh) {
+-				obj = list_entry(lh, yaffs_Object, hashLink);
++				obj = ylist_entry(lh, yaffs_Object, hashLink);
+ 				if (!obj->deferedFree) {
+-					yaffs_ObjectToCheckpointObject(&cp,obj);
++					yaffs_ObjectToCheckpointObject(&cp, obj);
+ 					cp.structType = sizeof(cp);
+ 
+-					T(YAFFS_TRACE_CHECKPOINT,(
++					T(YAFFS_TRACE_CHECKPOINT, (
+ 						TSTR("Checkpoint write object %d parent %d type %d chunk %d obj addr %x" TENDSTR),
+-						cp.objectId,cp.parentId,cp.variantType,cp.chunkId,(unsigned) obj));
++						cp.objectId, cp.parentId, cp.variantType, cp.hdrChunk, (unsigned) obj));
+ 
+-					ok = (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp));
++					ok = (yaffs_CheckpointWrite(dev, &cp, sizeof(cp)) == sizeof(cp));
+ 
+-					if(ok && obj->variantType == YAFFS_OBJECT_TYPE_FILE){
++					if (ok && obj->variantType == YAFFS_OBJECT_TYPE_FILE)
+ 						ok = yaffs_WriteCheckpointTnodes(obj);
+-					}
+ 				}
+ 			}
+ 		}
+-	 }
++	}
+ 
+-	 /* Dump end of list */
+-	memset(&cp,0xFF,sizeof(yaffs_CheckpointObject));
++	/* Dump end of list */
++	memset(&cp, 0xFF, sizeof(yaffs_CheckpointObject));
+ 	cp.structType = sizeof(cp);
+ 
+-	if(ok)
+-		ok = (yaffs_CheckpointWrite(dev,&cp,sizeof(cp)) == sizeof(cp));
++	if (ok)
++		ok = (yaffs_CheckpointWrite(dev, &cp, sizeof(cp)) == sizeof(cp));
+ 
+ 	return ok ? 1 : 0;
+ }
+@@ -4362,38 +4429,39 @@ static int yaffs_ReadCheckpointObjects(y
+ 	int done = 0;
+ 	yaffs_Object *hardList = NULL;
+ 
+-	while(ok && !done) {
+-		ok = (yaffs_CheckpointRead(dev,&cp,sizeof(cp)) == sizeof(cp));
+-		if(cp.structType != sizeof(cp)) {
+-			T(YAFFS_TRACE_CHECKPOINT,(TSTR("struct size %d instead of %d ok %d"TENDSTR),
+-				cp.structType,sizeof(cp),ok));
++	while (ok && !done) {
++		ok = (yaffs_CheckpointRead(dev, &cp, sizeof(cp)) == sizeof(cp));
++		if (cp.structType != sizeof(cp)) {
++			T(YAFFS_TRACE_CHECKPOINT, (TSTR("struct size %d instead of %d ok %d"TENDSTR),
++				cp.structType, sizeof(cp), ok));
+ 			ok = 0;
+ 		}
+ 
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("Checkpoint read object %d parent %d type %d chunk %d " TENDSTR),
+-			cp.objectId,cp.parentId,cp.variantType,cp.chunkId));
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("Checkpoint read object %d parent %d type %d chunk %d " TENDSTR),
++			cp.objectId, cp.parentId, cp.variantType, cp.hdrChunk));
+ 
+-		if(ok && cp.objectId == ~0)
++		if (ok && cp.objectId == ~0)
+ 			done = 1;
+-		else if(ok){
+-			obj = yaffs_FindOrCreateObjectByNumber(dev,cp.objectId, cp.variantType);
+-			if(obj) {
+-				yaffs_CheckpointObjectToObject(obj,&cp);
+-				if(obj->variantType == YAFFS_OBJECT_TYPE_FILE) {
++		else if (ok) {
++			obj = yaffs_FindOrCreateObjectByNumber(dev, cp.objectId, cp.variantType);
++			if (obj) {
++				ok = yaffs_CheckpointObjectToObject(obj, &cp);
++				if (!ok)
++					break;
++				if (obj->variantType == YAFFS_OBJECT_TYPE_FILE) {
+ 					ok = yaffs_ReadCheckpointTnodes(obj);
+-				} else if(obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) {
++				} else if (obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) {
+ 					obj->hardLinks.next =
+-						    (struct list_head *)
+-						    hardList;
++						(struct ylist_head *) hardList;
+ 					hardList = obj;
+ 				}
+-
+-			}
++			} else
++				ok = 0;
+ 		}
+ 	}
+ 
+-	if(ok)
+-		yaffs_HardlinkFixup(dev,hardList);
++	if (ok)
++		yaffs_HardlinkFixup(dev, hardList);
+ 
+ 	return ok ? 1 : 0;
+ }
+@@ -4403,11 +4471,11 @@ static int yaffs_WriteCheckpointSum(yaff
+ 	__u32 checkpointSum;
+ 	int ok;
+ 
+-	yaffs_GetCheckpointSum(dev,&checkpointSum);
++	yaffs_GetCheckpointSum(dev, &checkpointSum);
+ 
+-	ok = (yaffs_CheckpointWrite(dev,&checkpointSum,sizeof(checkpointSum)) == sizeof(checkpointSum));
++	ok = (yaffs_CheckpointWrite(dev, &checkpointSum, sizeof(checkpointSum)) == sizeof(checkpointSum));
+ 
+-	if(!ok)
++	if (!ok)
+ 		return 0;
+ 
+ 	return 1;
+@@ -4419,14 +4487,14 @@ static int yaffs_ReadCheckpointSum(yaffs
+ 	__u32 checkpointSum1;
+ 	int ok;
+ 
+-	yaffs_GetCheckpointSum(dev,&checkpointSum0);
++	yaffs_GetCheckpointSum(dev, &checkpointSum0);
+ 
+-	ok = (yaffs_CheckpointRead(dev,&checkpointSum1,sizeof(checkpointSum1)) == sizeof(checkpointSum1));
++	ok = (yaffs_CheckpointRead(dev, &checkpointSum1, sizeof(checkpointSum1)) == sizeof(checkpointSum1));
+ 
+-	if(!ok)
++	if (!ok)
+ 		return 0;
+ 
+-	if(checkpointSum0 != checkpointSum1)
++	if (checkpointSum0 != checkpointSum1)
+ 		return 0;
+ 
+ 	return 1;
+@@ -4435,46 +4503,43 @@ static int yaffs_ReadCheckpointSum(yaffs
+ 
+ static int yaffs_WriteCheckpointData(yaffs_Device *dev)
+ {
+-
+ 	int ok = 1;
+ 
+-	if(dev->skipCheckpointWrite || !dev->isYaffs2){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("skipping checkpoint write" TENDSTR)));
++	if (dev->skipCheckpointWrite || !dev->isYaffs2) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("skipping checkpoint write" TENDSTR)));
+ 		ok = 0;
+ 	}
+ 
+-	if(ok)
+-		ok = yaffs_CheckpointOpen(dev,1);
++	if (ok)
++		ok = yaffs_CheckpointOpen(dev, 1);
+ 
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint validity" TENDSTR)));
+-		ok = yaffs_WriteCheckpointValidityMarker(dev,1);
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("write checkpoint validity" TENDSTR)));
++		ok = yaffs_WriteCheckpointValidityMarker(dev, 1);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint device" TENDSTR)));
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("write checkpoint device" TENDSTR)));
+ 		ok = yaffs_WriteCheckpointDevice(dev);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint objects" TENDSTR)));
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("write checkpoint objects" TENDSTR)));
+ 		ok = yaffs_WriteCheckpointObjects(dev);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("write checkpoint validity" TENDSTR)));
+-		ok = yaffs_WriteCheckpointValidityMarker(dev,0);
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("write checkpoint validity" TENDSTR)));
++		ok = yaffs_WriteCheckpointValidityMarker(dev, 0);
+ 	}
+ 
+-	if(ok){
++	if (ok)
+ 		ok = yaffs_WriteCheckpointSum(dev);
+-	}
+-
+ 
+-	if(!yaffs_CheckpointClose(dev))
+-		 ok = 0;
++	if (!yaffs_CheckpointClose(dev))
++		ok = 0;
+ 
+-	if(ok)
+-	    	dev->isCheckpointed = 1;
+-	 else
+-	 	dev->isCheckpointed = 0;
++	if (ok)
++		dev->isCheckpointed = 1;
++	else
++		dev->isCheckpointed = 0;
+ 
+ 	return dev->isCheckpointed;
+ }
+@@ -4483,43 +4548,43 @@ static int yaffs_ReadCheckpointData(yaff
+ {
+ 	int ok = 1;
+ 
+-	if(dev->skipCheckpointRead || !dev->isYaffs2){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("skipping checkpoint read" TENDSTR)));
++	if (dev->skipCheckpointRead || !dev->isYaffs2) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("skipping checkpoint read" TENDSTR)));
+ 		ok = 0;
+ 	}
+ 
+-	if(ok)
+-		ok = yaffs_CheckpointOpen(dev,0); /* open for read */
++	if (ok)
++		ok = yaffs_CheckpointOpen(dev, 0); /* open for read */
+ 
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint validity" TENDSTR)));
+-		ok = yaffs_ReadCheckpointValidityMarker(dev,1);
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("read checkpoint validity" TENDSTR)));
++		ok = yaffs_ReadCheckpointValidityMarker(dev, 1);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint device" TENDSTR)));
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("read checkpoint device" TENDSTR)));
+ 		ok = yaffs_ReadCheckpointDevice(dev);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint objects" TENDSTR)));
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("read checkpoint objects" TENDSTR)));
+ 		ok = yaffs_ReadCheckpointObjects(dev);
+ 	}
+-	if(ok){
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint validity" TENDSTR)));
+-		ok = yaffs_ReadCheckpointValidityMarker(dev,0);
++	if (ok) {
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("read checkpoint validity" TENDSTR)));
++		ok = yaffs_ReadCheckpointValidityMarker(dev, 0);
+ 	}
+ 
+-	if(ok){
++	if (ok) {
+ 		ok = yaffs_ReadCheckpointSum(dev);
+-		T(YAFFS_TRACE_CHECKPOINT,(TSTR("read checkpoint checksum %d" TENDSTR),ok));
++		T(YAFFS_TRACE_CHECKPOINT, (TSTR("read checkpoint checksum %d" TENDSTR), ok));
+ 	}
+ 
+-	if(!yaffs_CheckpointClose(dev))
++	if (!yaffs_CheckpointClose(dev))
+ 		ok = 0;
+ 
+-	if(ok)
+-	    	dev->isCheckpointed = 1;
+-	 else
+-	 	dev->isCheckpointed = 0;
++	if (ok)
++		dev->isCheckpointed = 1;
++	else
++		dev->isCheckpointed = 0;
+ 
+ 	return ok ? 1 : 0;
+ 
+@@ -4527,11 +4592,11 @@ static int yaffs_ReadCheckpointData(yaff
+ 
+ static void yaffs_InvalidateCheckpoint(yaffs_Device *dev)
+ {
+-	if(dev->isCheckpointed ||
+-	   dev->blocksInCheckpoint > 0){
++	if (dev->isCheckpointed ||
++			dev->blocksInCheckpoint > 0) {
+ 		dev->isCheckpointed = 0;
+ 		yaffs_CheckpointInvalidateStream(dev);
+-		if(dev->superBlock && dev->markSuperBlockDirty)
++		if (dev->superBlock && dev->markSuperBlockDirty)
+ 			dev->markSuperBlockDirty(dev->superBlock);
+ 	}
+ }
+@@ -4540,18 +4605,18 @@ static void yaffs_InvalidateCheckpoint(y
+ int yaffs_CheckpointSave(yaffs_Device *dev)
+ {
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("save entry: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("save entry: isCheckpointed %d"TENDSTR), dev->isCheckpointed));
+ 
+ 	yaffs_VerifyObjects(dev);
+ 	yaffs_VerifyBlocks(dev);
+ 	yaffs_VerifyFreeChunks(dev);
+ 
+-	if(!dev->isCheckpointed) {
++	if (!dev->isCheckpointed) {
+ 		yaffs_InvalidateCheckpoint(dev);
+ 		yaffs_WriteCheckpointData(dev);
+ 	}
+ 
+-	T(YAFFS_TRACE_ALWAYS,(TSTR("save exit: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
++	T(YAFFS_TRACE_ALWAYS, (TSTR("save exit: isCheckpointed %d"TENDSTR), dev->isCheckpointed));
+ 
+ 	return dev->isCheckpointed;
+ }
+@@ -4559,17 +4624,17 @@ int yaffs_CheckpointSave(yaffs_Device *d
+ int yaffs_CheckpointRestore(yaffs_Device *dev)
+ {
+ 	int retval;
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("restore entry: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("restore entry: isCheckpointed %d"TENDSTR), dev->isCheckpointed));
+ 
+ 	retval = yaffs_ReadCheckpointData(dev);
+ 
+-	if(dev->isCheckpointed){
++	if (dev->isCheckpointed) {
+ 		yaffs_VerifyObjects(dev);
+ 		yaffs_VerifyBlocks(dev);
+ 		yaffs_VerifyFreeChunks(dev);
+ 	}
+ 
+-	T(YAFFS_TRACE_CHECKPOINT,(TSTR("restore exit: isCheckpointed %d"TENDSTR),dev->isCheckpointed));
++	T(YAFFS_TRACE_CHECKPOINT, (TSTR("restore exit: isCheckpointed %d"TENDSTR), dev->isCheckpointed));
+ 
+ 	return retval;
+ }
+@@ -4584,12 +4649,12 @@ int yaffs_CheckpointRestore(yaffs_Device
+  * Curve-balls: the first chunk might also be the last chunk.
+  */
+ 
+-int yaffs_ReadDataFromFile(yaffs_Object * in, __u8 * buffer, loff_t offset,
+-			   int nBytes)
++int yaffs_ReadDataFromFile(yaffs_Object *in, __u8 *buffer, loff_t offset,
++			int nBytes)
+ {
+ 
+ 	int chunk;
+-	int start;
++	__u32 start;
+ 	int nToCopy;
+ 	int n = nBytes;
+ 	int nDone = 0;
+@@ -4600,27 +4665,26 @@ int yaffs_ReadDataFromFile(yaffs_Object
+ 	dev = in->myDev;
+ 
+ 	while (n > 0) {
+-		//chunk = offset / dev->nDataBytesPerChunk + 1;
+-		//start = offset % dev->nDataBytesPerChunk;
+-		yaffs_AddrToChunk(dev,offset,&chunk,&start);
++		/* chunk = offset / dev->nDataBytesPerChunk + 1; */
++		/* start = offset % dev->nDataBytesPerChunk; */
++		yaffs_AddrToChunk(dev, offset, &chunk, &start);
+ 		chunk++;
+ 
+ 		/* OK now check for the curveball where the start and end are in
+ 		 * the same chunk.
+ 		 */
+-		if ((start + n) < dev->nDataBytesPerChunk) {
++		if ((start + n) < dev->nDataBytesPerChunk)
+ 			nToCopy = n;
+-		} else {
++		else
+ 			nToCopy = dev->nDataBytesPerChunk - start;
+-		}
+ 
+ 		cache = yaffs_FindChunkCache(in, chunk);
+ 
+ 		/* If the chunk is already in the cache or it is less than a whole chunk
+-		 * then use the cache (if there is caching)
++		 * or we're using inband tags then use the cache (if there is caching)
+ 		 * else bypass the cache.
+ 		 */
+-		if (cache || nToCopy != dev->nDataBytesPerChunk) {
++		if (cache || nToCopy != dev->nDataBytesPerChunk || dev->inbandTags) {
+ 			if (dev->nShortOpCaches > 0) {
+ 
+ 				/* If we can't find the data in the cache, then load it up. */
+@@ -4641,14 +4705,9 @@ int yaffs_ReadDataFromFile(yaffs_Object
+ 
+ 				cache->locked = 1;
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_UnlockYAFFS(TRUE);
+-#endif
++
+ 				memcpy(buffer, &cache->data[start], nToCopy);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_LockYAFFS(TRUE);
+-#endif
+ 				cache->locked = 0;
+ 			} else {
+ 				/* Read into the local buffer then copy..*/
+@@ -4657,41 +4716,19 @@ int yaffs_ReadDataFromFile(yaffs_Object
+ 				    yaffs_GetTempBuffer(dev, __LINE__);
+ 				yaffs_ReadChunkDataFromObject(in, chunk,
+ 							      localBuffer);
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_UnlockYAFFS(TRUE);
+-#endif
++
+ 				memcpy(buffer, &localBuffer[start], nToCopy);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_LockYAFFS(TRUE);
+-#endif
++
+ 				yaffs_ReleaseTempBuffer(dev, localBuffer,
+ 							__LINE__);
+ 			}
+ 
+ 		} else {
+-#ifdef CONFIG_YAFFS_WINCE
+-			__u8 *localBuffer = yaffs_GetTempBuffer(dev, __LINE__);
+-
+-			/* Under WinCE can't do direct transfer. Need to use a local buffer.
+-			 * This is because we otherwise screw up WinCE's memory mapper
+-			 */
+-			yaffs_ReadChunkDataFromObject(in, chunk, localBuffer);
+-
+-#ifdef CONFIG_YAFFS_WINCE
+-			yfsd_UnlockYAFFS(TRUE);
+-#endif
+-			memcpy(buffer, localBuffer, dev->nDataBytesPerChunk);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-			yfsd_LockYAFFS(TRUE);
+-			yaffs_ReleaseTempBuffer(dev, localBuffer, __LINE__);
+-#endif
+-
+-#else
+ 			/* A full chunk. Read directly into the supplied buffer. */
+ 			yaffs_ReadChunkDataFromObject(in, chunk, buffer);
+-#endif
++
+ 		}
+ 
+ 		n -= nToCopy;
+@@ -4704,28 +4741,37 @@ int yaffs_ReadDataFromFile(yaffs_Object
+ 	return nDone;
+ }
+ 
+-int yaffs_WriteDataToFile(yaffs_Object * in, const __u8 * buffer, loff_t offset,
+-			  int nBytes, int writeThrough)
++int yaffs_WriteDataToFile(yaffs_Object *in, const __u8 *buffer, loff_t offset,
++			int nBytes, int writeThrough)
+ {
+ 
+ 	int chunk;
+-	int start;
++	__u32 start;
+ 	int nToCopy;
+ 	int n = nBytes;
+ 	int nDone = 0;
+ 	int nToWriteBack;
+ 	int startOfWrite = offset;
+ 	int chunkWritten = 0;
+-	int nBytesRead;
++	__u32 nBytesRead;
++	__u32 chunkStart;
+ 
+ 	yaffs_Device *dev;
+ 
+ 	dev = in->myDev;
+ 
+ 	while (n > 0 && chunkWritten >= 0) {
+-		//chunk = offset / dev->nDataBytesPerChunk + 1;
+-		//start = offset % dev->nDataBytesPerChunk;
+-		yaffs_AddrToChunk(dev,offset,&chunk,&start);
++		/* chunk = offset / dev->nDataBytesPerChunk + 1; */
++		/* start = offset % dev->nDataBytesPerChunk; */
++		yaffs_AddrToChunk(dev, offset, &chunk, &start);
++
++		if (chunk * dev->nDataBytesPerChunk + start != offset ||
++				start >= dev->nDataBytesPerChunk) {
++			T(YAFFS_TRACE_ERROR, (
++			   TSTR("AddrToChunk of offset %d gives chunk %d start %d"
++			   TENDSTR),
++			   (int)offset, chunk, start));
++		}
+ 		chunk++;
+ 
+ 		/* OK now check for the curveball where the start and end are in
+@@ -4740,25 +4786,32 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 			 * we need to write back as much as was there before.
+ 			 */
+ 
+-			nBytesRead =
+-			    in->variant.fileVariant.fileSize -
+-			    ((chunk - 1) * dev->nDataBytesPerChunk);
++			chunkStart = ((chunk - 1) * dev->nDataBytesPerChunk);
++
++			if (chunkStart > in->variant.fileVariant.fileSize)
++				nBytesRead = 0; /* Past end of file */
++			else
++				nBytesRead = in->variant.fileVariant.fileSize - chunkStart;
+ 
+-			if (nBytesRead > dev->nDataBytesPerChunk) {
++			if (nBytesRead > dev->nDataBytesPerChunk)
+ 				nBytesRead = dev->nDataBytesPerChunk;
+-			}
+ 
+ 			nToWriteBack =
+ 			    (nBytesRead >
+ 			     (start + n)) ? nBytesRead : (start + n);
+ 
++			if (nToWriteBack < 0 || nToWriteBack > dev->nDataBytesPerChunk)
++				YBUG();
++
+ 		} else {
+ 			nToCopy = dev->nDataBytesPerChunk - start;
+ 			nToWriteBack = dev->nDataBytesPerChunk;
+ 		}
+ 
+-		if (nToCopy != dev->nDataBytesPerChunk) {
+-			/* An incomplete start or end chunk (or maybe both start and end chunk) */
++		if (nToCopy != dev->nDataBytesPerChunk || dev->inbandTags) {
++			/* An incomplete start or end chunk (or maybe both start and end chunk),
++			 * or we're using inband tags, so we want to use the cache buffers.
++			 */
+ 			if (dev->nShortOpCaches > 0) {
+ 				yaffs_ChunkCache *cache;
+ 				/* If we can't find the data in the cache, then load the cache */
+@@ -4775,10 +4828,9 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 					yaffs_ReadChunkDataFromObject(in, chunk,
+ 								      cache->
+ 								      data);
+-				}
+-				else if(cache &&
+-				        !cache->dirty &&
+-					!yaffs_CheckSpaceForAllocation(in->myDev)){
++				} else if (cache &&
++					!cache->dirty &&
++					!yaffs_CheckSpaceForAllocation(in->myDev)) {
+ 					/* Drop the cache if it was a read cache item and
+ 					 * no space check has been made for it.
+ 					 */
+@@ -4788,16 +4840,12 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 				if (cache) {
+ 					yaffs_UseChunkCache(dev, cache, 1);
+ 					cache->locked = 1;
+-#ifdef CONFIG_YAFFS_WINCE
+-					yfsd_UnlockYAFFS(TRUE);
+-#endif
++
+ 
+ 					memcpy(&cache->data[start], buffer,
+ 					       nToCopy);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-					yfsd_LockYAFFS(TRUE);
+-#endif
++
+ 					cache->locked = 0;
+ 					cache->nBytes = nToWriteBack;
+ 
+@@ -4825,15 +4873,10 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 				yaffs_ReadChunkDataFromObject(in, chunk,
+ 							      localBuffer);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_UnlockYAFFS(TRUE);
+-#endif
++
+ 
+ 				memcpy(&localBuffer[start], buffer, nToCopy);
+ 
+-#ifdef CONFIG_YAFFS_WINCE
+-				yfsd_LockYAFFS(TRUE);
+-#endif
+ 				chunkWritten =
+ 				    yaffs_WriteChunkDataToObject(in, chunk,
+ 								 localBuffer,
+@@ -4846,31 +4889,15 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 			}
+ 
+ 		} else {
+-
+-#ifdef CONFIG_YAFFS_WINCE
+-			/* Under WinCE can't do direct transfer. Need to use a local buffer.
+-			 * This is because we otherwise screw up WinCE's memory mapper
+-			 */
+-			__u8 *localBuffer = yaffs_GetTempBuffer(dev, __LINE__);
+-#ifdef CONFIG_YAFFS_WINCE
+-			yfsd_UnlockYAFFS(TRUE);
+-#endif
+-			memcpy(localBuffer, buffer, dev->nDataBytesPerChunk);
+-#ifdef CONFIG_YAFFS_WINCE
+-			yfsd_LockYAFFS(TRUE);
+-#endif
+-			chunkWritten =
+-			    yaffs_WriteChunkDataToObject(in, chunk, localBuffer,
+-							 dev->nDataBytesPerChunk,
+-							 0);
+-			yaffs_ReleaseTempBuffer(dev, localBuffer, __LINE__);
+-#else
+ 			/* A full chunk. Write directly from the supplied buffer. */
++
++
++
+ 			chunkWritten =
+ 			    yaffs_WriteChunkDataToObject(in, chunk, buffer,
+ 							 dev->nDataBytesPerChunk,
+ 							 0);
+-#endif
++
+ 			/* Since we've overwritten the cached data, we better invalidate it. */
+ 			yaffs_InvalidateChunkCache(in, chunk);
+ 		}
+@@ -4886,9 +4913,8 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 
+ 	/* Update file object */
+ 
+-	if ((startOfWrite + nDone) > in->variant.fileVariant.fileSize) {
++	if ((startOfWrite + nDone) > in->variant.fileVariant.fileSize)
+ 		in->variant.fileVariant.fileSize = (startOfWrite + nDone);
+-	}
+ 
+ 	in->dirty = 1;
+ 
+@@ -4898,7 +4924,7 @@ int yaffs_WriteDataToFile(yaffs_Object *
+ 
+ /* ---------------------- File resizing stuff ------------------ */
+ 
+-static void yaffs_PruneResizedChunks(yaffs_Object * in, int newSize)
++static void yaffs_PruneResizedChunks(yaffs_Object *in, int newSize)
+ {
+ 
+ 	yaffs_Device *dev = in->myDev;
+@@ -4939,11 +4965,11 @@ static void yaffs_PruneResizedChunks(yaf
+ 
+ }
+ 
+-int yaffs_ResizeFile(yaffs_Object * in, loff_t newSize)
++int yaffs_ResizeFile(yaffs_Object *in, loff_t newSize)
+ {
+ 
+ 	int oldFileSize = in->variant.fileVariant.fileSize;
+-	int newSizeOfPartialChunk;
++	__u32 newSizeOfPartialChunk;
+ 	int newFullChunks;
+ 
+ 	yaffs_Device *dev = in->myDev;
+@@ -4955,13 +4981,11 @@ int yaffs_ResizeFile(yaffs_Object * in,
+ 
+ 	yaffs_CheckGarbageCollection(dev);
+ 
+-	if (in->variantType != YAFFS_OBJECT_TYPE_FILE) {
+-		return yaffs_GetFileSize(in);
+-	}
++	if (in->variantType != YAFFS_OBJECT_TYPE_FILE)
++		return YAFFS_FAIL;
+ 
+-	if (newSize == oldFileSize) {
+-		return oldFileSize;
+-	}
++	if (newSize == oldFileSize)
++		return YAFFS_OK;
+ 
+ 	if (newSize < oldFileSize) {
+ 
+@@ -4994,21 +5018,20 @@ int yaffs_ResizeFile(yaffs_Object * in,
+ 	}
+ 
+ 
+-
+ 	/* Write a new object header.
+ 	 * show we've shrunk the file, if need be
+ 	 * Do this only if the file is not in the deleted directories.
+ 	 */
+-	if (in->parent->objectId != YAFFS_OBJECTID_UNLINKED &&
+-	    in->parent->objectId != YAFFS_OBJECTID_DELETED) {
++	if (in->parent &&
++	    in->parent->objectId != YAFFS_OBJECTID_UNLINKED &&
++	    in->parent->objectId != YAFFS_OBJECTID_DELETED)
+ 		yaffs_UpdateObjectHeader(in, NULL, 0,
+ 					 (newSize < oldFileSize) ? 1 : 0, 0);
+-	}
+ 
+-	return newSize;
++	return YAFFS_OK;
+ }
+ 
+-loff_t yaffs_GetFileSize(yaffs_Object * obj)
++loff_t yaffs_GetFileSize(yaffs_Object *obj)
+ {
+ 	obj = yaffs_GetEquivalentObject(obj);
+ 
+@@ -5024,7 +5047,7 @@ loff_t yaffs_GetFileSize(yaffs_Object *
+ 
+ 
+ 
+-int yaffs_FlushFile(yaffs_Object * in, int updateTime)
++int yaffs_FlushFile(yaffs_Object *in, int updateTime)
+ {
+ 	int retVal;
+ 	if (in->dirty) {
+@@ -5039,9 +5062,8 @@ int yaffs_FlushFile(yaffs_Object * in, i
+ #endif
+ 		}
+ 
+-		retVal =
+-		    (yaffs_UpdateObjectHeader(in, NULL, 0, 0, 0) >=
+-		     0) ? YAFFS_OK : YAFFS_FAIL;
++		retVal = (yaffs_UpdateObjectHeader(in, NULL, 0, 0, 0) >=
++			0) ? YAFFS_OK : YAFFS_FAIL;
+ 	} else {
+ 		retVal = YAFFS_OK;
+ 	}
+@@ -5050,7 +5072,7 @@ int yaffs_FlushFile(yaffs_Object * in, i
+ 
+ }
+ 
+-static int yaffs_DoGenericObjectDeletion(yaffs_Object * in)
++static int yaffs_DoGenericObjectDeletion(yaffs_Object *in)
+ {
+ 
+ 	/* First off, invalidate the file's data in the cache, without flushing. */
+@@ -5058,13 +5080,13 @@ static int yaffs_DoGenericObjectDeletion
+ 
+ 	if (in->myDev->isYaffs2 && (in->parent != in->myDev->deletedDir)) {
+ 		/* Move to the unlinked directory so we have a record that it was deleted. */
+-		yaffs_ChangeObjectName(in, in->myDev->deletedDir,"deleted", 0, 0);
++		yaffs_ChangeObjectName(in, in->myDev->deletedDir, _Y("deleted"), 0, 0);
+ 
+ 	}
+ 
+ 	yaffs_RemoveObjectFromDirectory(in);
+-	yaffs_DeleteChunk(in->myDev, in->chunkId, 1, __LINE__);
+-	in->chunkId = -1;
++	yaffs_DeleteChunk(in->myDev, in->hdrChunk, 1, __LINE__);
++	in->hdrChunk = 0;
+ 
+ 	yaffs_FreeObject(in);
+ 	return YAFFS_OK;
+@@ -5075,62 +5097,63 @@ static int yaffs_DoGenericObjectDeletion
+  * and the inode associated with the file.
+  * It does not delete the links associated with the file.
+  */
+-static int yaffs_UnlinkFile(yaffs_Object * in)
++static int yaffs_UnlinkFileIfNeeded(yaffs_Object *in)
+ {
+ 
+ 	int retVal;
+ 	int immediateDeletion = 0;
+ 
+-	if (1) {
+ #ifdef __KERNEL__
+-		if (!in->myInode) {
+-			immediateDeletion = 1;
+-
+-		}
++	if (!in->myInode)
++		immediateDeletion = 1;
+ #else
+-		if (in->inUse <= 0) {
+-			immediateDeletion = 1;
+-
+-		}
++	if (in->inUse <= 0)
++		immediateDeletion = 1;
+ #endif
+-		if (immediateDeletion) {
+-			retVal =
+-			    yaffs_ChangeObjectName(in, in->myDev->deletedDir,
+-						   "deleted", 0, 0);
+-			T(YAFFS_TRACE_TRACING,
+-			  (TSTR("yaffs: immediate deletion of file %d" TENDSTR),
+-			   in->objectId));
+-			in->deleted = 1;
+-			in->myDev->nDeletedFiles++;
+-			if (0 && in->myDev->isYaffs2) {
+-				yaffs_ResizeFile(in, 0);
+-			}
+-			yaffs_SoftDeleteFile(in);
+-		} else {
+-			retVal =
+-			    yaffs_ChangeObjectName(in, in->myDev->unlinkedDir,
+-						   "unlinked", 0, 0);
+-		}
+ 
++	if (immediateDeletion) {
++		retVal =
++		    yaffs_ChangeObjectName(in, in->myDev->deletedDir,
++					   _Y("deleted"), 0, 0);
++		T(YAFFS_TRACE_TRACING,
++		  (TSTR("yaffs: immediate deletion of file %d" TENDSTR),
++		   in->objectId));
++		in->deleted = 1;
++		in->myDev->nDeletedFiles++;
++		if (1 || in->myDev->isYaffs2)
++			yaffs_ResizeFile(in, 0);
++		yaffs_SoftDeleteFile(in);
++	} else {
++		retVal =
++		    yaffs_ChangeObjectName(in, in->myDev->unlinkedDir,
++					   _Y("unlinked"), 0, 0);
+ 	}
++
++
+ 	return retVal;
+ }
+ 
+-int yaffs_DeleteFile(yaffs_Object * in)
++int yaffs_DeleteFile(yaffs_Object *in)
+ {
+ 	int retVal = YAFFS_OK;
++	int deleted = in->deleted;
++
++	yaffs_ResizeFile(in, 0);
+ 
+ 	if (in->nDataChunks > 0) {
+-		/* Use soft deletion if there is data in the file */
+-		if (!in->unlinked) {
+-			retVal = yaffs_UnlinkFile(in);
+-		}
++		/* Use soft deletion if there is data in the file.
++		 * That won't be the case if it has been resized to zero.
++		 */
++		if (!in->unlinked)
++			retVal = yaffs_UnlinkFileIfNeeded(in);
++
+ 		if (retVal == YAFFS_OK && in->unlinked && !in->deleted) {
+ 			in->deleted = 1;
++			deleted = 1;
+ 			in->myDev->nDeletedFiles++;
+ 			yaffs_SoftDeleteFile(in);
+ 		}
+-		return in->deleted ? YAFFS_OK : YAFFS_FAIL;
++		return deleted ? YAFFS_OK : YAFFS_FAIL;
+ 	} else {
+ 		/* The file has no data chunks so we toss it immediately */
+ 		yaffs_FreeTnode(in->myDev, in->variant.fileVariant.top);
+@@ -5141,62 +5164,75 @@ int yaffs_DeleteFile(yaffs_Object * in)
+ 	}
+ }
+ 
+-static int yaffs_DeleteDirectory(yaffs_Object * in)
++static int yaffs_DeleteDirectory(yaffs_Object *in)
+ {
+ 	/* First check that the directory is empty. */
+-	if (list_empty(&in->variant.directoryVariant.children)) {
++	if (ylist_empty(&in->variant.directoryVariant.children))
+ 		return yaffs_DoGenericObjectDeletion(in);
+-	}
+ 
+ 	return YAFFS_FAIL;
+ 
+ }
+ 
+-static int yaffs_DeleteSymLink(yaffs_Object * in)
++static int yaffs_DeleteSymLink(yaffs_Object *in)
+ {
+ 	YFREE(in->variant.symLinkVariant.alias);
+ 
+ 	return yaffs_DoGenericObjectDeletion(in);
+ }
+ 
+-static int yaffs_DeleteHardLink(yaffs_Object * in)
++static int yaffs_DeleteHardLink(yaffs_Object *in)
+ {
+ 	/* remove this hardlink from the list assocaited with the equivalent
+ 	 * object
+ 	 */
+-	list_del(&in->hardLinks);
++	ylist_del_init(&in->hardLinks);
+ 	return yaffs_DoGenericObjectDeletion(in);
+ }
+ 
+-static void yaffs_DestroyObject(yaffs_Object * obj)
++int yaffs_DeleteObject(yaffs_Object *obj)
+ {
++int retVal = -1;
+ 	switch (obj->variantType) {
+ 	case YAFFS_OBJECT_TYPE_FILE:
+-		yaffs_DeleteFile(obj);
++		retVal = yaffs_DeleteFile(obj);
+ 		break;
+ 	case YAFFS_OBJECT_TYPE_DIRECTORY:
+-		yaffs_DeleteDirectory(obj);
++		return yaffs_DeleteDirectory(obj);
+ 		break;
+ 	case YAFFS_OBJECT_TYPE_SYMLINK:
+-		yaffs_DeleteSymLink(obj);
++		retVal = yaffs_DeleteSymLink(obj);
+ 		break;
+ 	case YAFFS_OBJECT_TYPE_HARDLINK:
+-		yaffs_DeleteHardLink(obj);
++		retVal = yaffs_DeleteHardLink(obj);
+ 		break;
+ 	case YAFFS_OBJECT_TYPE_SPECIAL:
+-		yaffs_DoGenericObjectDeletion(obj);
++		retVal = yaffs_DoGenericObjectDeletion(obj);
+ 		break;
+ 	case YAFFS_OBJECT_TYPE_UNKNOWN:
++		retVal = 0;
+ 		break;		/* should not happen. */
+ 	}
++
++	return retVal;
+ }
+ 
+-static int yaffs_UnlinkWorker(yaffs_Object * obj)
++static int yaffs_UnlinkWorker(yaffs_Object *obj)
+ {
+ 
++	int immediateDeletion = 0;
++
++#ifdef __KERNEL__
++	if (!obj->myInode)
++		immediateDeletion = 1;
++#else
++	if (obj->inUse <= 0)
++		immediateDeletion = 1;
++#endif
++
+ 	if (obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) {
+ 		return yaffs_DeleteHardLink(obj);
+-	} else if (!list_empty(&obj->hardLinks)) {
++	} else if (!ylist_empty(&obj->hardLinks)) {
+ 		/* Curve ball: We're unlinking an object that has a hardlink.
+ 		 *
+ 		 * This problem arises because we are not strictly following
+@@ -5215,24 +5251,24 @@ static int yaffs_UnlinkWorker(yaffs_Obje
+ 		int retVal;
+ 		YCHAR name[YAFFS_MAX_NAME_LENGTH + 1];
+ 
+-		hl = list_entry(obj->hardLinks.next, yaffs_Object, hardLinks);
++		hl = ylist_entry(obj->hardLinks.next, yaffs_Object, hardLinks);
+ 
+-		list_del_init(&hl->hardLinks);
+-		list_del_init(&hl->siblings);
++		ylist_del_init(&hl->hardLinks);
++		ylist_del_init(&hl->siblings);
+ 
+ 		yaffs_GetObjectName(hl, name, YAFFS_MAX_NAME_LENGTH + 1);
+ 
+ 		retVal = yaffs_ChangeObjectName(obj, hl->parent, name, 0, 0);
+ 
+-		if (retVal == YAFFS_OK) {
++		if (retVal == YAFFS_OK)
+ 			retVal = yaffs_DoGenericObjectDeletion(hl);
+-		}
++
+ 		return retVal;
+ 
+-	} else {
++	} else if (immediateDeletion) {
+ 		switch (obj->variantType) {
+ 		case YAFFS_OBJECT_TYPE_FILE:
+-			return yaffs_UnlinkFile(obj);
++			return yaffs_DeleteFile(obj);
+ 			break;
+ 		case YAFFS_OBJECT_TYPE_DIRECTORY:
+ 			return yaffs_DeleteDirectory(obj);
+@@ -5248,21 +5284,22 @@ static int yaffs_UnlinkWorker(yaffs_Obje
+ 		default:
+ 			return YAFFS_FAIL;
+ 		}
+-	}
++	} else
++		return yaffs_ChangeObjectName(obj, obj->myDev->unlinkedDir,
++					   _Y("unlinked"), 0, 0);
+ }
+ 
+ 
+-static int yaffs_UnlinkObject( yaffs_Object *obj)
++static int yaffs_UnlinkObject(yaffs_Object *obj)
+ {
+ 
+-	if (obj && obj->unlinkAllowed) {
++	if (obj && obj->unlinkAllowed)
+ 		return yaffs_UnlinkWorker(obj);
+-	}
+ 
+ 	return YAFFS_FAIL;
+ 
+ }
+-int yaffs_Unlink(yaffs_Object * dir, const YCHAR * name)
++int yaffs_Unlink(yaffs_Object *dir, const YCHAR *name)
+ {
+ 	yaffs_Object *obj;
+ 
+@@ -5272,8 +5309,8 @@ int yaffs_Unlink(yaffs_Object * dir, con
+ 
+ /*----------------------- Initialisation Scanning ---------------------- */
+ 
+-static void yaffs_HandleShadowedObject(yaffs_Device * dev, int objId,
+-				       int backwardScanning)
++static void yaffs_HandleShadowedObject(yaffs_Device *dev, int objId,
++				int backwardScanning)
+ {
+ 	yaffs_Object *obj;
+ 
+@@ -5286,9 +5323,8 @@ static void yaffs_HandleShadowedObject(y
+ 		/* Handle YAFFS2 case (backward scanning)
+ 		 * If the shadowed object exists then ignore.
+ 		 */
+-		if (yaffs_FindObjectByNumber(dev, objId)) {
++		if (yaffs_FindObjectByNumber(dev, objId))
+ 			return;
+-		}
+ 	}
+ 
+ 	/* Let's create it (if it does not exist) assuming it is a file so that it can do shrinking etc.
+@@ -5297,6 +5333,8 @@ static void yaffs_HandleShadowedObject(y
+ 	obj =
+ 	    yaffs_FindOrCreateObjectByNumber(dev, objId,
+ 					     YAFFS_OBJECT_TYPE_FILE);
++	if (!obj)
++		return;
+ 	yaffs_AddObjectToDirectory(dev->unlinkedDir, obj);
+ 	obj->variant.fileVariant.shrinkSize = 0;
+ 	obj->valid = 1;		/* So that we don't read any other info for this file */
+@@ -5325,44 +5363,77 @@ static void yaffs_HardlinkFixup(yaffs_De
+ 		if (in) {
+ 			/* Add the hardlink pointers */
+ 			hl->variant.hardLinkVariant.equivalentObject = in;
+-			list_add(&hl->hardLinks, &in->hardLinks);
++			ylist_add(&hl->hardLinks, &in->hardLinks);
+ 		} else {
+ 			/* Todo Need to report/handle this better.
+ 			 * Got a problem... hardlink to a non-existant object
+ 			 */
+ 			hl->variant.hardLinkVariant.equivalentObject = NULL;
+-			INIT_LIST_HEAD(&hl->hardLinks);
++			YINIT_LIST_HEAD(&hl->hardLinks);
+ 
+ 		}
+-
+ 	}
++}
++
++
+ 
++
++
++static int ybicmp(const void *a, const void *b)
++{
++	register int aseq = ((yaffs_BlockIndex *)a)->seq;
++	register int bseq = ((yaffs_BlockIndex *)b)->seq;
++	register int ablock = ((yaffs_BlockIndex *)a)->block;
++	register int bblock = ((yaffs_BlockIndex *)b)->block;
++	if (aseq == bseq)
++		return ablock - bblock;
++	else
++		return aseq - bseq;
+ }
+ 
+ 
++struct yaffs_ShadowFixerStruct {
++	int objectId;
++	int shadowedId;
++	struct yaffs_ShadowFixerStruct *next;
++};
++
+ 
++static void yaffs_StripDeletedObjects(yaffs_Device *dev)
++{
++	/*
++	*  Sort out state of unlinked and deleted objects after scanning.
++	*/
++	struct ylist_head *i;
++	struct ylist_head *n;
++	yaffs_Object *l;
+ 
++	/* Soft delete all the unlinked files */
++	ylist_for_each_safe(i, n,
++		&dev->unlinkedDir->variant.directoryVariant.children) {
++		if (i) {
++			l = ylist_entry(i, yaffs_Object, siblings);
++			yaffs_DeleteObject(l);
++		}
++	}
+ 
+-static int ybicmp(const void *a, const void *b){
+-    register int aseq = ((yaffs_BlockIndex *)a)->seq;
+-    register int bseq = ((yaffs_BlockIndex *)b)->seq;
+-    register int ablock = ((yaffs_BlockIndex *)a)->block;
+-    register int bblock = ((yaffs_BlockIndex *)b)->block;
+-    if( aseq == bseq )
+-        return ablock - bblock;
+-    else
+-        return aseq - bseq;
++	ylist_for_each_safe(i, n,
++		&dev->deletedDir->variant.directoryVariant.children) {
++		if (i) {
++			l = ylist_entry(i, yaffs_Object, siblings);
++			yaffs_DeleteObject(l);
++		}
++	}
+ 
+ }
+ 
+-static int yaffs_Scan(yaffs_Device * dev)
++static int yaffs_Scan(yaffs_Device *dev)
+ {
+ 	yaffs_ExtendedTags tags;
+ 	int blk;
+ 	int blockIterator;
+ 	int startIterator;
+ 	int endIterator;
+-	int nBlocksToScan = 0;
+ 	int result;
+ 
+ 	int chunk;
+@@ -5371,26 +5442,19 @@ static int yaffs_Scan(yaffs_Device * dev
+ 	yaffs_BlockState state;
+ 	yaffs_Object *hardList = NULL;
+ 	yaffs_BlockInfo *bi;
+-	int sequenceNumber;
++	__u32 sequenceNumber;
+ 	yaffs_ObjectHeader *oh;
+ 	yaffs_Object *in;
+ 	yaffs_Object *parent;
+-	int nBlocks = dev->internalEndBlock - dev->internalStartBlock + 1;
+ 
+ 	int alloc_failed = 0;
+ 
++	struct yaffs_ShadowFixerStruct *shadowFixerList = NULL;
++
+ 
+ 	__u8 *chunkData;
+ 
+-	yaffs_BlockIndex *blockIndex = NULL;
+ 
+-	if (dev->isYaffs2) {
+-		T(YAFFS_TRACE_SCAN,
+-		  (TSTR("yaffs_Scan is not for YAFFS2!" TENDSTR)));
+-		return YAFFS_FAIL;
+-	}
+-
+-	//TODO  Throw all the yaffs2 stuuf out of yaffs_Scan since it is only for yaffs1 format.
+ 
+ 	T(YAFFS_TRACE_SCAN,
+ 	  (TSTR("yaffs_Scan starts  intstartblk %d intendblk %d..." TENDSTR),
+@@ -5400,12 +5464,6 @@ static int yaffs_Scan(yaffs_Device * dev
+ 
+ 	dev->sequenceNumber = YAFFS_LOWEST_SEQUENCE_NUMBER;
+ 
+-	if (dev->isYaffs2) {
+-		blockIndex = YMALLOC(nBlocks * sizeof(yaffs_BlockIndex));
+-		if(!blockIndex)
+-			return YAFFS_FAIL;
+-	}
+-
+ 	/* Scan all the blocks to determine their state */
+ 	for (blk = dev->internalStartBlock; blk <= dev->internalEndBlock; blk++) {
+ 		bi = yaffs_GetBlockInfo(dev, blk);
+@@ -5418,6 +5476,9 @@ static int yaffs_Scan(yaffs_Device * dev
+ 		bi->blockState = state;
+ 		bi->sequenceNumber = sequenceNumber;
+ 
++		if (bi->sequenceNumber == YAFFS_SEQUENCE_BAD_BLOCK)
++			bi->blockState = state = YAFFS_BLOCK_STATE_DEAD;
++
+ 		T(YAFFS_TRACE_SCAN_DEBUG,
+ 		  (TSTR("Block scanning block %d state %d seq %d" TENDSTR), blk,
+ 		   state, sequenceNumber));
+@@ -5430,70 +5491,21 @@ static int yaffs_Scan(yaffs_Device * dev
+ 			  (TSTR("Block empty " TENDSTR)));
+ 			dev->nErasedBlocks++;
+ 			dev->nFreeChunks += dev->nChunksPerBlock;
+-		} else if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING) {
+-
+-			/* Determine the highest sequence number */
+-			if (dev->isYaffs2 &&
+-			    sequenceNumber >= YAFFS_LOWEST_SEQUENCE_NUMBER &&
+-			    sequenceNumber < YAFFS_HIGHEST_SEQUENCE_NUMBER) {
+-
+-				blockIndex[nBlocksToScan].seq = sequenceNumber;
+-				blockIndex[nBlocksToScan].block = blk;
+-
+-				nBlocksToScan++;
+-
+-				if (sequenceNumber >= dev->sequenceNumber) {
+-					dev->sequenceNumber = sequenceNumber;
+-				}
+-			} else if (dev->isYaffs2) {
+-				/* TODO: Nasty sequence number! */
+-				T(YAFFS_TRACE_SCAN,
+-				  (TSTR
+-				   ("Block scanning block %d has bad sequence number %d"
+-				    TENDSTR), blk, sequenceNumber));
+-
+-			}
+ 		}
+ 	}
+ 
+-	/* Sort the blocks
+-	 * Dungy old bubble sort for now...
+-	 */
+-	if (dev->isYaffs2) {
+-		yaffs_BlockIndex temp;
+-		int i;
+-		int j;
+-
+-		for (i = 0; i < nBlocksToScan; i++)
+-			for (j = i + 1; j < nBlocksToScan; j++)
+-				if (blockIndex[i].seq > blockIndex[j].seq) {
+-					temp = blockIndex[j];
+-					blockIndex[j] = blockIndex[i];
+-					blockIndex[i] = temp;
+-				}
+-	}
+-
+-	/* Now scan the blocks looking at the data. */
+-	if (dev->isYaffs2) {
+-		startIterator = 0;
+-		endIterator = nBlocksToScan - 1;
+-		T(YAFFS_TRACE_SCAN_DEBUG,
+-		  (TSTR("%d blocks to be scanned" TENDSTR), nBlocksToScan));
+-	} else {
+-		startIterator = dev->internalStartBlock;
+-		endIterator = dev->internalEndBlock;
+-	}
++	startIterator = dev->internalStartBlock;
++	endIterator = dev->internalEndBlock;
+ 
+ 	/* For each block.... */
+ 	for (blockIterator = startIterator; !alloc_failed && blockIterator <= endIterator;
+ 	     blockIterator++) {
+ 
+-		if (dev->isYaffs2) {
+-			/* get the block to scan in the correct order */
+-			blk = blockIndex[blockIterator].block;
+-		} else {
+-			blk = blockIterator;
+-		}
++		YYIELD();
++
++		YYIELD();
++
++		blk = blockIterator;
+ 
+ 		bi = yaffs_GetBlockInfo(dev, blk);
+ 		state = bi->blockState;
+@@ -5511,7 +5523,7 @@ static int yaffs_Scan(yaffs_Device * dev
+ 
+ 			/* Let's have a good look at this chunk... */
+ 
+-			if (!dev->isYaffs2 && tags.chunkDeleted) {
++			if (tags.eccResult == YAFFS_ECC_RESULT_UNFIXED || tags.chunkDeleted) {
+ 				/* YAFFS1 only...
+ 				 * A deleted chunk
+ 				 */
+@@ -5540,18 +5552,6 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					dev->allocationBlockFinder = blk;
+ 					/* Set it to here to encourage the allocator to go forth from here. */
+ 
+-					/* Yaffs2 sanity check:
+-					 * This should be the one with the highest sequence number
+-					 */
+-					if (dev->isYaffs2
+-					    && (dev->sequenceNumber !=
+-						bi->sequenceNumber)) {
+-						T(YAFFS_TRACE_ALWAYS,
+-						  (TSTR
+-						   ("yaffs: Allocation block %d was not highest sequence id:"
+-						    " block seq = %d, dev seq = %d"
+-						    TENDSTR), blk,bi->sequenceNumber,dev->sequenceNumber));
+-					}
+ 				}
+ 
+ 				dev->nFreeChunks += (dev->nChunksPerBlock - c);
+@@ -5570,11 +5570,11 @@ static int yaffs_Scan(yaffs_Device * dev
+ 				 * the same chunkId).
+ 				 */
+ 
+-				if(!in)
++				if (!in)
+ 					alloc_failed = 1;
+ 
+-				if(in){
+-					if(!yaffs_PutChunkIntoFile(in, tags.chunkId, chunk,1))
++				if (in) {
++					if (!yaffs_PutChunkIntoFile(in, tags.chunkId, chunk, 1))
+ 						alloc_failed = 1;
+ 				}
+ 
+@@ -5617,7 +5617,7 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					 * deleted, and worse still it has changed type. Delete the old object.
+ 					 */
+ 
+-					yaffs_DestroyObject(in);
++					yaffs_DeleteObject(in);
+ 
+ 					in = 0;
+ 				}
+@@ -5627,14 +5627,20 @@ static int yaffs_Scan(yaffs_Device * dev
+ 								      objectId,
+ 								      oh->type);
+ 
+-				if(!in)
++				if (!in)
+ 					alloc_failed = 1;
+ 
+ 				if (in && oh->shadowsObject > 0) {
+-					yaffs_HandleShadowedObject(dev,
+-								   oh->
+-								   shadowsObject,
+-								   0);
++
++					struct yaffs_ShadowFixerStruct *fixer;
++					fixer = YMALLOC(sizeof(struct yaffs_ShadowFixerStruct));
++					if (fixer) {
++						fixer->next = shadowFixerList;
++						shadowFixerList = fixer;
++						fixer->objectId = tags.objectId;
++						fixer->shadowedId = oh->shadowsObject;
++					}
++
+ 				}
+ 
+ 				if (in && in->valid) {
+@@ -5643,12 +5649,10 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					unsigned existingSerial = in->serial;
+ 					unsigned newSerial = tags.serialNumber;
+ 
+-					if (dev->isYaffs2 ||
+-					    ((existingSerial + 1) & 3) ==
+-					    newSerial) {
++					if (((existingSerial + 1) & 3) == newSerial) {
+ 						/* Use new one - destroy the exisiting one */
+ 						yaffs_DeleteChunk(dev,
+-								  in->chunkId,
++								  in->hdrChunk,
+ 								  1, __LINE__);
+ 						in->valid = 0;
+ 					} else {
+@@ -5681,7 +5685,8 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					in->yst_ctime = oh->yst_ctime;
+ 					in->yst_rdev = oh->yst_rdev;
+ #endif
+-					in->chunkId = chunk;
++					in->hdrChunk = chunk;
++					in->serial = tags.serialNumber;
+ 
+ 				} else if (in && !in->valid) {
+ 					/* we need to load this info */
+@@ -5705,7 +5710,8 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					in->yst_ctime = oh->yst_ctime;
+ 					in->yst_rdev = oh->yst_rdev;
+ #endif
+-					in->chunkId = chunk;
++					in->hdrChunk = chunk;
++					in->serial = tags.serialNumber;
+ 
+ 					yaffs_SetObjectName(in, oh->name);
+ 					in->dirty = 0;
+@@ -5718,25 +5724,25 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					    yaffs_FindOrCreateObjectByNumber
+ 					    (dev, oh->parentObjectId,
+ 					     YAFFS_OBJECT_TYPE_DIRECTORY);
+-					if (parent->variantType ==
++					if (!parent)
++						alloc_failed = 1;
++					if (parent && parent->variantType ==
+ 					    YAFFS_OBJECT_TYPE_UNKNOWN) {
+ 						/* Set up as a directory */
+ 						parent->variantType =
+-						    YAFFS_OBJECT_TYPE_DIRECTORY;
+-						INIT_LIST_HEAD(&parent->variant.
+-							       directoryVariant.
+-							       children);
+-					} else if (parent->variantType !=
+-						   YAFFS_OBJECT_TYPE_DIRECTORY)
+-					{
++							YAFFS_OBJECT_TYPE_DIRECTORY;
++						YINIT_LIST_HEAD(&parent->variant.
++								directoryVariant.
++								children);
++					} else if (!parent || parent->variantType !=
++						   YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 						/* Hoosterman, another problem....
+ 						 * We're trying to use a non-directory as a directory
+ 						 */
+ 
+ 						T(YAFFS_TRACE_ERROR,
+ 						  (TSTR
+-						   ("yaffs tragedy: attempting to use non-directory as"
+-						    " a directory in scan. Put in lost+found."
++						   ("yaffs tragedy: attempting to use non-directory as a directory in scan. Put in lost+found."
+ 						    TENDSTR)));
+ 						parent = dev->lostNFoundDir;
+ 					}
+@@ -5760,15 +5766,6 @@ static int yaffs_Scan(yaffs_Device * dev
+ 						/* Todo got a problem */
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_FILE:
+-						if (dev->isYaffs2
+-						    && oh->isShrink) {
+-							/* Prune back the shrunken chunks */
+-							yaffs_PruneResizedChunks
+-							    (in, oh->fileSize);
+-							/* Mark the block as having a shrinkHeader */
+-							bi->hasShrinkHeader = 1;
+-						}
+-
+ 						if (dev->useHeaderFileSize)
+ 
+ 							in->variant.fileVariant.
+@@ -5778,11 +5775,11 @@ static int yaffs_Scan(yaffs_Device * dev
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_HARDLINK:
+ 						in->variant.hardLinkVariant.
+-						    equivalentObjectId =
+-						    oh->equivalentObjectId;
++							equivalentObjectId =
++							oh->equivalentObjectId;
+ 						in->hardLinks.next =
+-						    (struct list_head *)
+-						    hardList;
++							(struct ylist_head *)
++							hardList;
+ 						hardList = in;
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_DIRECTORY:
+@@ -5794,15 +5791,17 @@ static int yaffs_Scan(yaffs_Device * dev
+ 					case YAFFS_OBJECT_TYPE_SYMLINK:
+ 						in->variant.symLinkVariant.alias =
+ 						    yaffs_CloneString(oh->alias);
+-						if(!in->variant.symLinkVariant.alias)
++						if (!in->variant.symLinkVariant.alias)
+ 							alloc_failed = 1;
+ 						break;
+ 					}
+ 
++/*
+ 					if (parent == dev->deletedDir) {
+ 						yaffs_DestroyObject(in);
+ 						bi->hasShrinkHeader = 1;
+ 					}
++*/
+ 				}
+ 			}
+ 		}
+@@ -5823,10 +5822,6 @@ static int yaffs_Scan(yaffs_Device * dev
+ 
+ 	}
+ 
+-	if (blockIndex) {
+-		YFREE(blockIndex);
+-	}
+-
+ 
+ 	/* Ok, we've done all the scanning.
+ 	 * Fix up the hard link chains.
+@@ -5834,32 +5829,36 @@ static int yaffs_Scan(yaffs_Device * dev
+ 	 * hardlinks.
+ 	 */
+ 
+-	yaffs_HardlinkFixup(dev,hardList);
++	yaffs_HardlinkFixup(dev, hardList);
+ 
+-	/* Handle the unlinked files. Since they were left in an unlinked state we should
+-	 * just delete them.
+-	 */
++	/* Fix up any shadowed objects */
+ 	{
+-		struct list_head *i;
+-		struct list_head *n;
++		struct yaffs_ShadowFixerStruct *fixer;
++		yaffs_Object *obj;
+ 
+-		yaffs_Object *l;
+-		/* Soft delete all the unlinked files */
+-		list_for_each_safe(i, n,
+-				   &dev->unlinkedDir->variant.directoryVariant.
+-				   children) {
+-			if (i) {
+-				l = list_entry(i, yaffs_Object, siblings);
+-				yaffs_DestroyObject(l);
+-			}
++		while (shadowFixerList) {
++			fixer = shadowFixerList;
++			shadowFixerList = fixer->next;
++			/* Complete the rename transaction by deleting the shadowed object
++			 * then setting the object header to unshadowed.
++			 */
++			obj = yaffs_FindObjectByNumber(dev, fixer->shadowedId);
++			if (obj)
++				yaffs_DeleteObject(obj);
++
++			obj = yaffs_FindObjectByNumber(dev, fixer->objectId);
++
++			if (obj)
++				yaffs_UpdateObjectHeader(obj, NULL, 1, 0, 0);
++
++			YFREE(fixer);
+ 		}
+ 	}
+ 
+ 	yaffs_ReleaseTempBuffer(dev, chunkData, __LINE__);
+ 
+-	if(alloc_failed){
++	if (alloc_failed)
+ 		return YAFFS_FAIL;
+-	}
+ 
+ 	T(YAFFS_TRACE_SCAN, (TSTR("yaffs_Scan ends" TENDSTR)));
+ 
+@@ -5871,25 +5870,27 @@ static void yaffs_CheckObjectDetailsLoad
+ {
+ 	__u8 *chunkData;
+ 	yaffs_ObjectHeader *oh;
+-	yaffs_Device *dev = in->myDev;
++	yaffs_Device *dev;
+ 	yaffs_ExtendedTags tags;
+ 	int result;
+ 	int alloc_failed = 0;
+ 
+-	if(!in)
++	if (!in)
+ 		return;
+ 
++	dev = in->myDev;
++
+ #if 0
+-	T(YAFFS_TRACE_SCAN,(TSTR("details for object %d %s loaded" TENDSTR),
++	T(YAFFS_TRACE_SCAN, (TSTR("details for object %d %s loaded" TENDSTR),
+ 		in->objectId,
+ 		in->lazyLoaded ? "not yet" : "already"));
+ #endif
+ 
+-	if(in->lazyLoaded){
++	if (in->lazyLoaded && in->hdrChunk > 0) {
+ 		in->lazyLoaded = 0;
+ 		chunkData = yaffs_GetTempBuffer(dev, __LINE__);
+ 
+-		result = yaffs_ReadChunkWithTagsFromNAND(dev,in->chunkId,chunkData,&tags);
++		result = yaffs_ReadChunkWithTagsFromNAND(dev, in->hdrChunk, chunkData, &tags);
+ 		oh = (yaffs_ObjectHeader *) chunkData;
+ 
+ 		in->yst_mode = oh->yst_mode;
+@@ -5911,18 +5912,18 @@ static void yaffs_CheckObjectDetailsLoad
+ #endif
+ 		yaffs_SetObjectName(in, oh->name);
+ 
+-		if(in->variantType == YAFFS_OBJECT_TYPE_SYMLINK){
+-			 in->variant.symLinkVariant.alias =
++		if (in->variantType == YAFFS_OBJECT_TYPE_SYMLINK) {
++			in->variant.symLinkVariant.alias =
+ 						    yaffs_CloneString(oh->alias);
+-			if(!in->variant.symLinkVariant.alias)
++			if (!in->variant.symLinkVariant.alias)
+ 				alloc_failed = 1; /* Not returned to caller */
+ 		}
+ 
+-		yaffs_ReleaseTempBuffer(dev,chunkData, __LINE__);
++		yaffs_ReleaseTempBuffer(dev, chunkData, __LINE__);
+ 	}
+ }
+ 
+-static int yaffs_ScanBackwards(yaffs_Device * dev)
++static int yaffs_ScanBackwards(yaffs_Device *dev)
+ {
+ 	yaffs_ExtendedTags tags;
+ 	int blk;
+@@ -5938,7 +5939,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 	yaffs_BlockState state;
+ 	yaffs_Object *hardList = NULL;
+ 	yaffs_BlockInfo *bi;
+-	int sequenceNumber;
++	__u32 sequenceNumber;
+ 	yaffs_ObjectHeader *oh;
+ 	yaffs_Object *in;
+ 	yaffs_Object *parent;
+@@ -5972,12 +5973,12 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 	blockIndex = YMALLOC(nBlocks * sizeof(yaffs_BlockIndex));
+ 
+-	if(!blockIndex) {
++	if (!blockIndex) {
+ 		blockIndex = YMALLOC_ALT(nBlocks * sizeof(yaffs_BlockIndex));
+ 		altBlockIndex = 1;
+ 	}
+ 
+-	if(!blockIndex) {
++	if (!blockIndex) {
+ 		T(YAFFS_TRACE_SCAN,
+ 		  (TSTR("yaffs_Scan() could not allocate block index!" TENDSTR)));
+ 		return YAFFS_FAIL;
+@@ -5999,15 +6000,17 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 		bi->blockState = state;
+ 		bi->sequenceNumber = sequenceNumber;
+ 
+-		if(bi->sequenceNumber == YAFFS_SEQUENCE_CHECKPOINT_DATA)
++		if (bi->sequenceNumber == YAFFS_SEQUENCE_CHECKPOINT_DATA)
+ 			bi->blockState = state = YAFFS_BLOCK_STATE_CHECKPOINT;
++		if (bi->sequenceNumber == YAFFS_SEQUENCE_BAD_BLOCK)
++			bi->blockState = state = YAFFS_BLOCK_STATE_DEAD;
+ 
+ 		T(YAFFS_TRACE_SCAN_DEBUG,
+ 		  (TSTR("Block scanning block %d state %d seq %d" TENDSTR), blk,
+ 		   state, sequenceNumber));
+ 
+ 
+-		if(state == YAFFS_BLOCK_STATE_CHECKPOINT){
++		if (state == YAFFS_BLOCK_STATE_CHECKPOINT) {
+ 			dev->blocksInCheckpoint++;
+ 
+ 		} else if (state == YAFFS_BLOCK_STATE_DEAD) {
+@@ -6021,8 +6024,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 		} else if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING) {
+ 
+ 			/* Determine the highest sequence number */
+-			if (dev->isYaffs2 &&
+-			    sequenceNumber >= YAFFS_LOWEST_SEQUENCE_NUMBER &&
++			if (sequenceNumber >= YAFFS_LOWEST_SEQUENCE_NUMBER &&
+ 			    sequenceNumber < YAFFS_HIGHEST_SEQUENCE_NUMBER) {
+ 
+ 				blockIndex[nBlocksToScan].seq = sequenceNumber;
+@@ -6030,10 +6032,9 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 				nBlocksToScan++;
+ 
+-				if (sequenceNumber >= dev->sequenceNumber) {
++				if (sequenceNumber >= dev->sequenceNumber)
+ 					dev->sequenceNumber = sequenceNumber;
+-				}
+-			} else if (dev->isYaffs2) {
++			} else {
+ 				/* TODO: Nasty sequence number! */
+ 				T(YAFFS_TRACE_SCAN,
+ 				  (TSTR
+@@ -6053,11 +6054,13 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 	/* Sort the blocks */
+ #ifndef CONFIG_YAFFS_USE_OWN_SORT
+-	yaffs_qsort(blockIndex, nBlocksToScan,
+-		sizeof(yaffs_BlockIndex), ybicmp);
++	{
++		/* Use qsort now. */
++		yaffs_qsort(blockIndex, nBlocksToScan, sizeof(yaffs_BlockIndex), ybicmp);
++	}
+ #else
+ 	{
+-	 	/* Dungy old bubble sort... */
++		/* Dungy old bubble sort... */
+ 
+ 		yaffs_BlockIndex temp;
+ 		int i;
+@@ -6075,7 +6078,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 	YYIELD();
+ 
+-    	T(YAFFS_TRACE_SCAN, (TSTR("...done" TENDSTR)));
++	T(YAFFS_TRACE_SCAN, (TSTR("...done" TENDSTR)));
+ 
+ 	/* Now scan the blocks looking at the data. */
+ 	startIterator = 0;
+@@ -6085,10 +6088,10 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 	/* For each block.... backwards */
+ 	for (blockIterator = endIterator; !alloc_failed && blockIterator >= startIterator;
+-	     blockIterator--) {
+-	        /* Cooperative multitasking! This loop can run for so
++			blockIterator--) {
++		/* Cooperative multitasking! This loop can run for so
+ 		   long that watchdog timers expire. */
+-	        YYIELD();
++		YYIELD();
+ 
+ 		/* get the block to scan in the correct order */
+ 		blk = blockIndex[blockIterator].block;
+@@ -6127,10 +6130,8 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 				 * this is the one being allocated from
+ 				 */
+ 
+-				if(foundChunksInBlock)
+-				{
++				if (foundChunksInBlock) {
+ 					/* This is a chunk that was skipped due to failing the erased check */
+-
+ 				} else if (c == 0) {
+ 					/* We're looking at the first chunk in the block so the block is unused */
+ 					state = YAFFS_BLOCK_STATE_EMPTY;
+@@ -6138,7 +6139,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 				} else {
+ 					if (state == YAFFS_BLOCK_STATE_NEEDS_SCANNING ||
+ 					    state == YAFFS_BLOCK_STATE_ALLOCATING) {
+-					    	if(dev->sequenceNumber == bi->sequenceNumber) {
++						if (dev->sequenceNumber == bi->sequenceNumber) {
+ 							/* this is the block being allocated from */
+ 
+ 							T(YAFFS_TRACE_SCAN,
+@@ -6150,27 +6151,31 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 							dev->allocationBlock = blk;
+ 							dev->allocationPage = c;
+ 							dev->allocationBlockFinder = blk;
+-						}
+-						else {
++						} else {
+ 							/* This is a partially written block that is not
+ 							 * the current allocation block. This block must have
+ 							 * had a write failure, so set up for retirement.
+ 							 */
+ 
+-							 bi->needsRetiring = 1;
++							 /* bi->needsRetiring = 1; ??? TODO */
+ 							 bi->gcPrioritise = 1;
+ 
+ 							 T(YAFFS_TRACE_ALWAYS,
+-							 (TSTR("Partially written block %d being set for retirement" TENDSTR),
++							 (TSTR("Partially written block %d detected" TENDSTR),
+ 							 blk));
+ 						}
+-
+ 					}
+-
+ 				}
+ 
+ 				dev->nFreeChunks++;
+ 
++			} else if (tags.eccResult == YAFFS_ECC_RESULT_UNFIXED) {
++				T(YAFFS_TRACE_SCAN,
++				  (TSTR(" Unfixed ECC in chunk(%d:%d), chunk ignored"TENDSTR),
++				  blk, c));
++
++				  dev->nFreeChunks++;
++
+ 			} else if (tags.chunkId > 0) {
+ 				/* chunkId > 0 so it is a data chunk... */
+ 				unsigned int endpos;
+@@ -6187,7 +6192,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 								      tags.
+ 								      objectId,
+ 								      YAFFS_OBJECT_TYPE_FILE);
+-				if(!in){
++				if (!in) {
+ 					/* Out of memory */
+ 					alloc_failed = 1;
+ 				}
+@@ -6197,8 +6202,8 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 				    && chunkBase <
+ 				    in->variant.fileVariant.shrinkSize) {
+ 					/* This has not been invalidated by a resize */
+-					if(!yaffs_PutChunkIntoFile(in, tags.chunkId,
+-							       chunk, -1)){
++					if (!yaffs_PutChunkIntoFile(in, tags.chunkId,
++							       chunk, -1)) {
+ 						alloc_failed = 1;
+ 					}
+ 
+@@ -6221,7 +6226,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 						    scannedFileSize;
+ 					}
+ 
+-				} else if(in) {
++				} else if (in) {
+ 					/* This chunk has been invalidated by a resize, so delete */
+ 					yaffs_DeleteChunk(dev, chunk, 1, __LINE__);
+ 
+@@ -6242,6 +6247,8 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 					in = yaffs_FindOrCreateObjectByNumber
+ 					    (dev, tags.objectId,
+ 					     tags.extraObjectType);
++					if (!in)
++						alloc_failed = 1;
+ 				}
+ 
+ 				if (!in ||
+@@ -6251,8 +6258,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 				    tags.extraShadows ||
+ 				    (!in->valid &&
+ 				    (tags.objectId == YAFFS_OBJECTID_ROOT ||
+-				     tags.objectId == YAFFS_OBJECTID_LOSTNFOUND))
+-				    ) {
++				     tags.objectId == YAFFS_OBJECTID_LOSTNFOUND))) {
+ 
+ 					/* If we don't have  valid info then we need to read the chunk
+ 					 * TODO In future we can probably defer reading the chunk and
+@@ -6266,8 +6272,17 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 					oh = (yaffs_ObjectHeader *) chunkData;
+ 
+-					if (!in)
++					if (dev->inbandTags) {
++						/* Fix up the header if they got corrupted by inband tags */
++						oh->shadowsObject = oh->inbandShadowsObject;
++						oh->isShrink = oh->inbandIsShrink;
++					}
++
++					if (!in) {
+ 						in = yaffs_FindOrCreateObjectByNumber(dev, tags.objectId, oh->type);
++						if (!in)
++							alloc_failed = 1;
++					}
+ 
+ 				}
+ 
+@@ -6275,10 +6290,9 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 					/* TODO Hoosterman we have a problem! */
+ 					T(YAFFS_TRACE_ERROR,
+ 					  (TSTR
+-					   ("yaffs tragedy: Could not make object for object  %d  "
+-					    "at chunk %d during scan"
++					   ("yaffs tragedy: Could not make object for object  %d at chunk %d during scan"
+ 					    TENDSTR), tags.objectId, chunk));
+-
++					continue;
+ 				}
+ 
+ 				if (in->valid) {
+@@ -6289,10 +6303,9 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 					if ((in->variantType == YAFFS_OBJECT_TYPE_FILE) &&
+ 					     ((oh &&
+-					       oh-> type == YAFFS_OBJECT_TYPE_FILE)||
++					       oh->type == YAFFS_OBJECT_TYPE_FILE) ||
+ 					      (tags.extraHeaderInfoAvailable  &&
+-					       tags.extraObjectType == YAFFS_OBJECT_TYPE_FILE))
+-					    ) {
++					       tags.extraObjectType == YAFFS_OBJECT_TYPE_FILE))) {
+ 						__u32 thisSize =
+ 						    (oh) ? oh->fileSize : tags.
+ 						    extraFileLength;
+@@ -6300,7 +6313,9 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 						    (oh) ? oh->
+ 						    parentObjectId : tags.
+ 						    extraParentObjectId;
+-						unsigned isShrink =
++
++
++						isShrink =
+ 						    (oh) ? oh->isShrink : tags.
+ 						    extraIsShrinkHeader;
+ 
+@@ -6323,9 +6338,8 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 							    thisSize;
+ 						}
+ 
+-						if (isShrink) {
++						if (isShrink)
+ 							bi->hasShrinkHeader = 1;
+-						}
+ 
+ 					}
+ 					/* Use existing - destroy this one. */
+@@ -6333,6 +6347,17 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 				}
+ 
++				if (!in->valid && in->variantType !=
++				    (oh ? oh->type : tags.extraObjectType))
++					T(YAFFS_TRACE_ERROR, (
++						TSTR("yaffs tragedy: Bad object type, "
++					    TCONT("%d != %d, for object %d at chunk ")
++					    TCONT("%d during scan")
++						TENDSTR), oh ?
++					    oh->type : tags.extraObjectType,
++					    in->variantType, tags.objectId,
++					    chunk));
++
+ 				if (!in->valid &&
+ 				    (tags.objectId == YAFFS_OBJECTID_ROOT ||
+ 				     tags.objectId ==
+@@ -6340,7 +6365,7 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 					/* We only load some info, don't fiddle with directory structure */
+ 					in->valid = 1;
+ 
+-					if(oh) {
++					if (oh) {
+ 						in->variantType = oh->type;
+ 
+ 						in->yst_mode = oh->yst_mode;
+@@ -6365,15 +6390,15 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 						in->lazyLoaded = 1;
+ 					}
+ 
+-					in->chunkId = chunk;
++					in->hdrChunk = chunk;
+ 
+ 				} else if (!in->valid) {
+ 					/* we need to load this info */
+ 
+ 					in->valid = 1;
+-					in->chunkId = chunk;
++					in->hdrChunk = chunk;
+ 
+-					if(oh) {
++					if (oh) {
+ 						in->variantType = oh->type;
+ 
+ 						in->yst_mode = oh->yst_mode;
+@@ -6403,20 +6428,19 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 						yaffs_SetObjectName(in, oh->name);
+ 						parent =
+ 						    yaffs_FindOrCreateObjectByNumber
+-					    		(dev, oh->parentObjectId,
+-					     		 YAFFS_OBJECT_TYPE_DIRECTORY);
++							(dev, oh->parentObjectId,
++							 YAFFS_OBJECT_TYPE_DIRECTORY);
+ 
+ 						 fileSize = oh->fileSize;
+- 						 isShrink = oh->isShrink;
++						 isShrink = oh->isShrink;
+ 						 equivalentObjectId = oh->equivalentObjectId;
+ 
+-					}
+-					else {
++					} else {
+ 						in->variantType = tags.extraObjectType;
+ 						parent =
+ 						    yaffs_FindOrCreateObjectByNumber
+-					    		(dev, tags.extraParentObjectId,
+-					     		 YAFFS_OBJECT_TYPE_DIRECTORY);
++							(dev, tags.extraParentObjectId,
++							 YAFFS_OBJECT_TYPE_DIRECTORY);
+ 						 fileSize = tags.extraFileLength;
+ 						 isShrink = tags.extraIsShrinkHeader;
+ 						 equivalentObjectId = tags.extraEquivalentObjectId;
+@@ -6425,29 +6449,30 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 					}
+ 					in->dirty = 0;
+ 
++					if (!parent)
++						alloc_failed = 1;
++
+ 					/* directory stuff...
+ 					 * hook up to parent
+ 					 */
+ 
+-					if (parent->variantType ==
++					if (parent && parent->variantType ==
+ 					    YAFFS_OBJECT_TYPE_UNKNOWN) {
+ 						/* Set up as a directory */
+ 						parent->variantType =
+-						    YAFFS_OBJECT_TYPE_DIRECTORY;
+-						INIT_LIST_HEAD(&parent->variant.
+-							       directoryVariant.
+-							       children);
+-					} else if (parent->variantType !=
+-						   YAFFS_OBJECT_TYPE_DIRECTORY)
+-					{
++							YAFFS_OBJECT_TYPE_DIRECTORY;
++						YINIT_LIST_HEAD(&parent->variant.
++							directoryVariant.
++							children);
++					} else if (!parent || parent->variantType !=
++						   YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 						/* Hoosterman, another problem....
+ 						 * We're trying to use a non-directory as a directory
+ 						 */
+ 
+ 						T(YAFFS_TRACE_ERROR,
+ 						  (TSTR
+-						   ("yaffs tragedy: attempting to use non-directory as"
+-						    " a directory in scan. Put in lost+found."
++						   ("yaffs tragedy: attempting to use non-directory as a directory in scan. Put in lost+found."
+ 						    TENDSTR)));
+ 						parent = dev->lostNFoundDir;
+ 					}
+@@ -6494,12 +6519,12 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_HARDLINK:
+-						if(!itsUnlinked) {
+-						  in->variant.hardLinkVariant.equivalentObjectId =
+-						    equivalentObjectId;
+-						  in->hardLinks.next =
+-						    (struct list_head *) hardList;
+-						  hardList = in;
++						if (!itsUnlinked) {
++							in->variant.hardLinkVariant.equivalentObjectId =
++								equivalentObjectId;
++							in->hardLinks.next =
++								(struct ylist_head *) hardList;
++							hardList = in;
+ 						}
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_DIRECTORY:
+@@ -6509,12 +6534,11 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 						/* Do nothing */
+ 						break;
+ 					case YAFFS_OBJECT_TYPE_SYMLINK:
+-						if(oh){
+-						   in->variant.symLinkVariant.alias =
+-						    yaffs_CloneString(oh->
+-								      alias);
+-						   if(!in->variant.symLinkVariant.alias)
+-						   	alloc_failed = 1;
++						if (oh) {
++							in->variant.symLinkVariant.alias =
++								yaffs_CloneString(oh->alias);
++							if (!in->variant.symLinkVariant.alias)
++								alloc_failed = 1;
+ 						}
+ 						break;
+ 					}
+@@ -6551,75 +6575,129 @@ static int yaffs_ScanBackwards(yaffs_Dev
+ 	 * We should now have scanned all the objects, now it's time to add these
+ 	 * hardlinks.
+ 	 */
+-	yaffs_HardlinkFixup(dev,hardList);
++	yaffs_HardlinkFixup(dev, hardList);
+ 
+ 
+-	/*
+-	*  Sort out state of unlinked and deleted objects.
+-	*/
+-	{
+-		struct list_head *i;
+-		struct list_head *n;
++	yaffs_ReleaseTempBuffer(dev, chunkData, __LINE__);
+ 
+-		yaffs_Object *l;
++	if (alloc_failed)
++		return YAFFS_FAIL;
+ 
+-		/* Soft delete all the unlinked files */
+-		list_for_each_safe(i, n,
+-				   &dev->unlinkedDir->variant.directoryVariant.
+-				   children) {
+-			if (i) {
+-				l = list_entry(i, yaffs_Object, siblings);
+-				yaffs_DestroyObject(l);
+-			}
+-		}
++	T(YAFFS_TRACE_SCAN, (TSTR("yaffs_ScanBackwards ends" TENDSTR)));
+ 
+-		/* Soft delete all the deletedDir files */
+-		list_for_each_safe(i, n,
+-				   &dev->deletedDir->variant.directoryVariant.
+-				   children) {
+-			if (i) {
+-				l = list_entry(i, yaffs_Object, siblings);
+-				yaffs_DestroyObject(l);
++	return YAFFS_OK;
++}
+ 
+-			}
++/*------------------------------  Directory Functions ----------------------------- */
++
++static void yaffs_VerifyObjectInDirectory(yaffs_Object *obj)
++{
++	struct ylist_head *lh;
++	yaffs_Object *listObj;
++
++	int count = 0;
++
++	if (!obj) {
++		T(YAFFS_TRACE_ALWAYS, (TSTR("No object to verify" TENDSTR)));
++		YBUG();
++		return;
++	}
++
++	if (yaffs_SkipVerification(obj->myDev))
++		return;
++
++	if (!obj->parent) {
++		T(YAFFS_TRACE_ALWAYS, (TSTR("Object does not have parent" TENDSTR)));
++		YBUG();
++		return;
++	}
++
++	if (obj->parent->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
++		T(YAFFS_TRACE_ALWAYS, (TSTR("Parent is not directory" TENDSTR)));
++		YBUG();
++	}
++
++	/* Iterate through the objects in each hash entry */
++
++	ylist_for_each(lh, &obj->parent->variant.directoryVariant.children) {
++		if (lh) {
++			listObj = ylist_entry(lh, yaffs_Object, siblings);
++			yaffs_VerifyObject(listObj);
++			if (obj == listObj)
++				count++;
+ 		}
++	 }
++
++	if (count != 1) {
++		T(YAFFS_TRACE_ALWAYS, (TSTR("Object in directory %d times" TENDSTR), count));
++		YBUG();
+ 	}
++}
+ 
+-	yaffs_ReleaseTempBuffer(dev, chunkData, __LINE__);
++static void yaffs_VerifyDirectory(yaffs_Object *directory)
++{
++	struct ylist_head *lh;
++	yaffs_Object *listObj;
+ 
+-	if(alloc_failed){
+-		return YAFFS_FAIL;
++	if (!directory) {
++		YBUG();
++		return;
+ 	}
+ 
+-	T(YAFFS_TRACE_SCAN, (TSTR("yaffs_ScanBackwards ends" TENDSTR)));
++	if (yaffs_SkipFullVerification(directory->myDev))
++		return;
+ 
+-	return YAFFS_OK;
++	if (directory->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
++		T(YAFFS_TRACE_ALWAYS, (TSTR("Directory has wrong type: %d" TENDSTR), directory->variantType));
++		YBUG();
++	}
++
++	/* Iterate through the objects in each hash entry */
++
++	ylist_for_each(lh, &directory->variant.directoryVariant.children) {
++		if (lh) {
++			listObj = ylist_entry(lh, yaffs_Object, siblings);
++			if (listObj->parent != directory) {
++				T(YAFFS_TRACE_ALWAYS, (TSTR("Object in directory list has wrong parent %p" TENDSTR), listObj->parent));
++				YBUG();
++			}
++			yaffs_VerifyObjectInDirectory(listObj);
++		}
++	}
+ }
+ 
+-/*------------------------------  Directory Functions ----------------------------- */
+ 
+-static void yaffs_RemoveObjectFromDirectory(yaffs_Object * obj)
++static void yaffs_RemoveObjectFromDirectory(yaffs_Object *obj)
+ {
+ 	yaffs_Device *dev = obj->myDev;
++	yaffs_Object *parent;
++
++	yaffs_VerifyObjectInDirectory(obj);
++	parent = obj->parent;
++
++	yaffs_VerifyDirectory(parent);
+ 
+-	if(dev && dev->removeObjectCallback)
++	if (dev && dev->removeObjectCallback)
+ 		dev->removeObjectCallback(obj);
+ 
+-	list_del_init(&obj->siblings);
++
++	ylist_del_init(&obj->siblings);
+ 	obj->parent = NULL;
++
++	yaffs_VerifyDirectory(parent);
+ }
+ 
+ 
+-static void yaffs_AddObjectToDirectory(yaffs_Object * directory,
+-				       yaffs_Object * obj)
++static void yaffs_AddObjectToDirectory(yaffs_Object *directory,
++					yaffs_Object *obj)
+ {
+-
+ 	if (!directory) {
+ 		T(YAFFS_TRACE_ALWAYS,
+ 		  (TSTR
+ 		   ("tragedy: Trying to add an object to a null pointer directory"
+ 		    TENDSTR)));
+ 		YBUG();
++		return;
+ 	}
+ 	if (directory->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 		T(YAFFS_TRACE_ALWAYS,
+@@ -6631,37 +6709,42 @@ static void yaffs_AddObjectToDirectory(y
+ 
+ 	if (obj->siblings.prev == NULL) {
+ 		/* Not initialised */
+-		INIT_LIST_HEAD(&obj->siblings);
+-
+-	} else if (!list_empty(&obj->siblings)) {
+-		/* If it is holed up somewhere else, un hook it */
+-		yaffs_RemoveObjectFromDirectory(obj);
++		YBUG();
+ 	}
++
++
++	yaffs_VerifyDirectory(directory);
++
++	yaffs_RemoveObjectFromDirectory(obj);
++
++
+ 	/* Now add it */
+-	list_add(&obj->siblings, &directory->variant.directoryVariant.children);
++	ylist_add(&obj->siblings, &directory->variant.directoryVariant.children);
+ 	obj->parent = directory;
+ 
+ 	if (directory == obj->myDev->unlinkedDir
+-	    || directory == obj->myDev->deletedDir) {
++			|| directory == obj->myDev->deletedDir) {
+ 		obj->unlinked = 1;
+ 		obj->myDev->nUnlinkedFiles++;
+ 		obj->renameAllowed = 0;
+ 	}
++
++	yaffs_VerifyDirectory(directory);
++	yaffs_VerifyObjectInDirectory(obj);
+ }
+ 
+-yaffs_Object *yaffs_FindObjectByName(yaffs_Object * directory,
+-				     const YCHAR * name)
++yaffs_Object *yaffs_FindObjectByName(yaffs_Object *directory,
++				     const YCHAR *name)
+ {
+ 	int sum;
+ 
+-	struct list_head *i;
++	struct ylist_head *i;
+ 	YCHAR buffer[YAFFS_MAX_NAME_LENGTH + 1];
+ 
+ 	yaffs_Object *l;
+ 
+-	if (!name) {
++	if (!name)
+ 		return NULL;
+-	}
+ 
+ 	if (!directory) {
+ 		T(YAFFS_TRACE_ALWAYS,
+@@ -6669,6 +6752,7 @@ yaffs_Object *yaffs_FindObjectByName(yaf
+ 		   ("tragedy: yaffs_FindObjectByName: null pointer directory"
+ 		    TENDSTR)));
+ 		YBUG();
++		return NULL;
+ 	}
+ 	if (directory->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 		T(YAFFS_TRACE_ALWAYS,
+@@ -6679,28 +6763,27 @@ yaffs_Object *yaffs_FindObjectByName(yaf
+ 
+ 	sum = yaffs_CalcNameSum(name);
+ 
+-	list_for_each(i, &directory->variant.directoryVariant.children) {
++	ylist_for_each(i, &directory->variant.directoryVariant.children) {
+ 		if (i) {
+-			l = list_entry(i, yaffs_Object, siblings);
++			l = ylist_entry(i, yaffs_Object, siblings);
++
++			if (l->parent != directory)
++				YBUG();
+ 
+ 			yaffs_CheckObjectDetailsLoaded(l);
+ 
+ 			/* Special case for lost-n-found */
+ 			if (l->objectId == YAFFS_OBJECTID_LOSTNFOUND) {
+-				if (yaffs_strcmp(name, YAFFS_LOSTNFOUND_NAME) == 0) {
++				if (yaffs_strcmp(name, YAFFS_LOSTNFOUND_NAME) == 0)
+ 					return l;
+-				}
+-			} else if (yaffs_SumCompare(l->sum, sum) || l->chunkId <= 0)
+-			{
+-				/* LostnFound cunk called Objxxx
++			} else if (yaffs_SumCompare(l->sum, sum) || l->hdrChunk <= 0) {
++				/* LostnFound chunk called Objxxx
+ 				 * Do a real check
+ 				 */
+ 				yaffs_GetObjectName(l, buffer,
+ 						    YAFFS_MAX_NAME_LENGTH);
+-				if (yaffs_strncmp(name, buffer,YAFFS_MAX_NAME_LENGTH) == 0) {
++				if (yaffs_strncmp(name, buffer, YAFFS_MAX_NAME_LENGTH) == 0)
+ 					return l;
+-				}
+-
+ 			}
+ 		}
+ 	}
+@@ -6710,10 +6793,10 @@ yaffs_Object *yaffs_FindObjectByName(yaf
+ 
+ 
+ #if 0
+-int yaffs_ApplyToDirectoryChildren(yaffs_Object * theDir,
+-				   int (*fn) (yaffs_Object *))
++int yaffs_ApplyToDirectoryChildren(yaffs_Object *theDir,
++					int (*fn) (yaffs_Object *))
+ {
+-	struct list_head *i;
++	struct ylist_head *i;
+ 	yaffs_Object *l;
+ 
+ 	if (!theDir) {
+@@ -6722,20 +6805,21 @@ int yaffs_ApplyToDirectoryChildren(yaffs
+ 		   ("tragedy: yaffs_FindObjectByName: null pointer directory"
+ 		    TENDSTR)));
+ 		YBUG();
++		return YAFFS_FAIL;
+ 	}
+ 	if (theDir->variantType != YAFFS_OBJECT_TYPE_DIRECTORY) {
+ 		T(YAFFS_TRACE_ALWAYS,
+ 		  (TSTR
+ 		   ("tragedy: yaffs_FindObjectByName: non-directory" TENDSTR)));
+ 		YBUG();
++		return YAFFS_FAIL;
+ 	}
+ 
+-	list_for_each(i, &theDir->variant.directoryVariant.children) {
++	ylist_for_each(i, &theDir->variant.directoryVariant.children) {
+ 		if (i) {
+-			l = list_entry(i, yaffs_Object, siblings);
+-			if (l && !fn(l)) {
++			l = ylist_entry(i, yaffs_Object, siblings);
++			if (l && !fn(l))
+ 				return YAFFS_FAIL;
+-			}
+ 		}
+ 	}
+ 
+@@ -6748,7 +6832,7 @@ int yaffs_ApplyToDirectoryChildren(yaffs
+  * actual object.
+  */
+ 
+-yaffs_Object *yaffs_GetEquivalentObject(yaffs_Object * obj)
++yaffs_Object *yaffs_GetEquivalentObject(yaffs_Object *obj)
+ {
+ 	if (obj && obj->variantType == YAFFS_OBJECT_TYPE_HARDLINK) {
+ 		/* We want the object id of the equivalent object, not this one */
+@@ -6756,10 +6840,9 @@ yaffs_Object *yaffs_GetEquivalentObject(
+ 		yaffs_CheckObjectDetailsLoaded(obj);
+ 	}
+ 	return obj;
+-
+ }
+ 
+-int yaffs_GetObjectName(yaffs_Object * obj, YCHAR * name, int buffSize)
++int yaffs_GetObjectName(yaffs_Object *obj, YCHAR *name, int buffSize)
+ {
+ 	memset(name, 0, buffSize * sizeof(YCHAR));
+ 
+@@ -6767,18 +6850,26 @@ int yaffs_GetObjectName(yaffs_Object * o
+ 
+ 	if (obj->objectId == YAFFS_OBJECTID_LOSTNFOUND) {
+ 		yaffs_strncpy(name, YAFFS_LOSTNFOUND_NAME, buffSize - 1);
+-	} else if (obj->chunkId <= 0) {
++	} else if (obj->hdrChunk <= 0) {
+ 		YCHAR locName[20];
++		YCHAR numString[20];
++		YCHAR *x = &numString[19];
++		unsigned v = obj->objectId;
++		numString[19] = 0;
++		while (v > 0) {
++			x--;
++			*x = '0' + (v % 10);
++			v /= 10;
++		}
+ 		/* make up a name */
+-		yaffs_sprintf(locName, _Y("%s%d"), YAFFS_LOSTNFOUND_PREFIX,
+-			      obj->objectId);
++		yaffs_strcpy(locName, YAFFS_LOSTNFOUND_PREFIX);
++		yaffs_strcat(locName, x);
+ 		yaffs_strncpy(name, locName, buffSize - 1);
+ 
+ 	}
+ #ifdef CONFIG_YAFFS_SHORT_NAMES_IN_RAM
+-	else if (obj->shortName[0]) {
++	else if (obj->shortName[0])
+ 		yaffs_strcpy(name, obj->shortName);
+-	}
+ #endif
+ 	else {
+ 		int result;
+@@ -6788,9 +6879,9 @@ int yaffs_GetObjectName(yaffs_Object * o
+ 
+ 		memset(buffer, 0, obj->myDev->nDataBytesPerChunk);
+ 
+-		if (obj->chunkId >= 0) {
++		if (obj->hdrChunk > 0) {
+ 			result = yaffs_ReadChunkWithTagsFromNAND(obj->myDev,
+-							obj->chunkId, buffer,
++							obj->hdrChunk, buffer,
+ 							NULL);
+ 		}
+ 		yaffs_strncpy(name, oh->name, buffSize - 1);
+@@ -6801,46 +6892,43 @@ int yaffs_GetObjectName(yaffs_Object * o
+ 	return yaffs_strlen(name);
+ }
+ 
+-int yaffs_GetObjectFileLength(yaffs_Object * obj)
++int yaffs_GetObjectFileLength(yaffs_Object *obj)
+ {
+-
+ 	/* Dereference any hard linking */
+ 	obj = yaffs_GetEquivalentObject(obj);
+ 
+-	if (obj->variantType == YAFFS_OBJECT_TYPE_FILE) {
++	if (obj->variantType == YAFFS_OBJECT_TYPE_FILE)
+ 		return obj->variant.fileVariant.fileSize;
+-	}
+-	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK) {
++	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK)
+ 		return yaffs_strlen(obj->variant.symLinkVariant.alias);
+-	} else {
++	else {
+ 		/* Only a directory should drop through to here */
+ 		return obj->myDev->nDataBytesPerChunk;
+ 	}
+ }
+ 
+-int yaffs_GetObjectLinkCount(yaffs_Object * obj)
++int yaffs_GetObjectLinkCount(yaffs_Object *obj)
+ {
+ 	int count = 0;
+-	struct list_head *i;
++	struct ylist_head *i;
+ 
+-	if (!obj->unlinked) {
+-		count++;	/* the object itself */
+-	}
+-	list_for_each(i, &obj->hardLinks) {
+-		count++;	/* add the hard links; */
+-	}
+-	return count;
++	if (!obj->unlinked)
++		count++;		/* the object itself */
++
++	ylist_for_each(i, &obj->hardLinks)
++		count++;		/* add the hard links; */
+ 
++	return count;
+ }
+ 
+-int yaffs_GetObjectInode(yaffs_Object * obj)
++int yaffs_GetObjectInode(yaffs_Object *obj)
+ {
+ 	obj = yaffs_GetEquivalentObject(obj);
+ 
+ 	return obj->objectId;
+ }
+ 
+-unsigned yaffs_GetObjectType(yaffs_Object * obj)
++unsigned yaffs_GetObjectType(yaffs_Object *obj)
+ {
+ 	obj = yaffs_GetEquivalentObject(obj);
+ 
+@@ -6872,19 +6960,18 @@ unsigned yaffs_GetObjectType(yaffs_Objec
+ 	}
+ }
+ 
+-YCHAR *yaffs_GetSymlinkAlias(yaffs_Object * obj)
++YCHAR *yaffs_GetSymlinkAlias(yaffs_Object *obj)
+ {
+ 	obj = yaffs_GetEquivalentObject(obj);
+-	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK) {
++	if (obj->variantType == YAFFS_OBJECT_TYPE_SYMLINK)
+ 		return yaffs_CloneString(obj->variant.symLinkVariant.alias);
+-	} else {
++	else
+ 		return yaffs_CloneString(_Y(""));
+-	}
+ }
+ 
+ #ifndef CONFIG_YAFFS_WINCE
+ 
+-int yaffs_SetAttributes(yaffs_Object * obj, struct iattr *attr)
++int yaffs_SetAttributes(yaffs_Object *obj, struct iattr *attr)
+ {
+ 	unsigned int valid = attr->ia_valid;
+ 
+@@ -6910,7 +6997,7 @@ int yaffs_SetAttributes(yaffs_Object * o
+ 	return YAFFS_OK;
+ 
+ }
+-int yaffs_GetAttributes(yaffs_Object * obj, struct iattr *attr)
++int yaffs_GetAttributes(yaffs_Object *obj, struct iattr *attr)
+ {
+ 	unsigned int valid = 0;
+ 
+@@ -6934,13 +7021,12 @@ int yaffs_GetAttributes(yaffs_Object * o
+ 	attr->ia_valid = valid;
+ 
+ 	return YAFFS_OK;
+-
+ }
+ 
+ #endif
+ 
+ #if 0
+-int yaffs_DumpObject(yaffs_Object * obj)
++int yaffs_DumpObject(yaffs_Object *obj)
+ {
+ 	YCHAR name[257];
+ 
+@@ -6951,7 +7037,7 @@ int yaffs_DumpObject(yaffs_Object * obj)
+ 	   ("Object %d, inode %d \"%s\"\n dirty %d valid %d serial %d sum %d"
+ 	    " chunk %d type %d size %d\n"
+ 	    TENDSTR), obj->objectId, yaffs_GetObjectInode(obj), name,
+-	   obj->dirty, obj->valid, obj->serial, obj->sum, obj->chunkId,
++	   obj->dirty, obj->valid, obj->serial, obj->sum, obj->hdrChunk,
+ 	   yaffs_GetObjectType(obj), yaffs_GetObjectFileLength(obj)));
+ 
+ 	return YAFFS_OK;
+@@ -6960,7 +7046,7 @@ int yaffs_DumpObject(yaffs_Object * obj)
+ 
+ /*---------------------------- Initialisation code -------------------------------------- */
+ 
+-static int yaffs_CheckDevFunctions(const yaffs_Device * dev)
++static int yaffs_CheckDevFunctions(const yaffs_Device *dev)
+ {
+ 
+ 	/* Common functions, gotta have */
+@@ -7011,7 +7097,7 @@ static int yaffs_CreateInitialDirectorie
+ 	    yaffs_CreateFakeDirectory(dev, YAFFS_OBJECTID_LOSTNFOUND,
+ 				      YAFFS_LOSTNFOUND_MODE | S_IFDIR);
+ 
+-	if(dev->lostNFoundDir && dev->rootDir && dev->unlinkedDir && dev->deletedDir){
++	if (dev->lostNFoundDir && dev->rootDir && dev->unlinkedDir && dev->deletedDir) {
+ 		yaffs_AddObjectToDirectory(dev->rootDir, dev->lostNFoundDir);
+ 		return YAFFS_OK;
+ 	}
+@@ -7019,7 +7105,7 @@ static int yaffs_CreateInitialDirectorie
+ 	return YAFFS_FAIL;
+ }
+ 
+-int yaffs_GutsInitialise(yaffs_Device * dev)
++int yaffs_GutsInitialise(yaffs_Device *dev)
+ {
+ 	int init_failed = 0;
+ 	unsigned x;
+@@ -7040,6 +7126,8 @@ int yaffs_GutsInitialise(yaffs_Device *
+ 	dev->chunkOffset = 0;
+ 	dev->nFreeChunks = 0;
+ 
++	dev->gcBlock = -1;
++
+ 	if (dev->startBlock == 0) {
+ 		dev->internalStartBlock = dev->startBlock + 1;
+ 		dev->internalEndBlock = dev->endBlock + 1;
+@@ -7049,18 +7137,18 @@ int yaffs_GutsInitialise(yaffs_Device *
+ 
+ 	/* Check geometry parameters. */
+ 
+-	if ((dev->isYaffs2 && dev->nDataBytesPerChunk < 1024) ||
+-	    (!dev->isYaffs2 && dev->nDataBytesPerChunk != 512) ||
++	if ((!dev->inbandTags && dev->isYaffs2 && dev->totalBytesPerChunk < 1024) ||
++	    (!dev->isYaffs2 && dev->totalBytesPerChunk < 512) ||
++	    (dev->inbandTags && !dev->isYaffs2) ||
+ 	     dev->nChunksPerBlock < 2 ||
+ 	     dev->nReservedBlocks < 2 ||
+ 	     dev->internalStartBlock <= 0 ||
+ 	     dev->internalEndBlock <= 0 ||
+-	     dev->internalEndBlock <= (dev->internalStartBlock + dev->nReservedBlocks + 2)	// otherwise it is too small
+-	    ) {
++	     dev->internalEndBlock <= (dev->internalStartBlock + dev->nReservedBlocks + 2)) {	/* otherwise it is too small */
+ 		T(YAFFS_TRACE_ALWAYS,
+ 		  (TSTR
+-		   ("yaffs: NAND geometry problems: chunk size %d, type is yaffs%s "
+-		    TENDSTR), dev->nDataBytesPerChunk, dev->isYaffs2 ? "2" : ""));
++		   ("yaffs: NAND geometry problems: chunk size %d, type is yaffs%s, inbandTags %d "
++		    TENDSTR), dev->totalBytesPerChunk, dev->isYaffs2 ? "2" : "", dev->inbandTags));
+ 		return YAFFS_FAIL;
+ 	}
+ 
+@@ -7070,6 +7158,12 @@ int yaffs_GutsInitialise(yaffs_Device *
+ 		return YAFFS_FAIL;
+ 	}
+ 
++	/* Sort out space for inband tags, if required */
++	if (dev->inbandTags)
++		dev->nDataBytesPerChunk = dev->totalBytesPerChunk - sizeof(yaffs_PackedTags2TagsPart);
++	else
++		dev->nDataBytesPerChunk = dev->totalBytesPerChunk;
++
+ 	/* Got the right mix of functions? */
+ 	if (!yaffs_CheckDevFunctions(dev)) {
+ 		/* Function missing */
+@@ -7097,31 +7191,18 @@ int yaffs_GutsInitialise(yaffs_Device *
+ 
+ 	dev->isMounted = 1;
+ 
+-
+-
+ 	/* OK now calculate a few things for the device */
+ 
+ 	/*
+ 	 *  Calculate all the chunk size manipulation numbers:
+ 	 */
+-	 /* Start off assuming it is a power of 2 */
+-	 dev->chunkShift = ShiftDiv(dev->nDataBytesPerChunk);
+-	 dev->chunkMask = (1<<dev->chunkShift) - 1;
+-
+-	 if(dev->nDataBytesPerChunk == (dev->chunkMask + 1)){
+-	 	/* Yes it is a power of 2, disable crumbs */
+-		dev->crumbMask = 0;
+-		dev->crumbShift = 0;
+-		dev->crumbsPerChunk = 0;
+-	 } else {
+-	 	/* Not a power of 2, use crumbs instead */
+-		dev->crumbShift = ShiftDiv(sizeof(yaffs_PackedTags2TagsPart));
+-		dev->crumbMask = (1<<dev->crumbShift)-1;
+-		dev->crumbsPerChunk = dev->nDataBytesPerChunk/(1 << dev->crumbShift);
+-		dev->chunkShift = 0;
+-		dev->chunkMask = 0;
+-	}
+-
++	x = dev->nDataBytesPerChunk;
++	/* We always use dev->chunkShift and dev->chunkDiv */
++	dev->chunkShift = Shifts(x);
++	x >>= dev->chunkShift;
++	dev->chunkDiv = x;
++	/* We only use chunk mask if chunkDiv is 1 */
++	dev->chunkMask = (1<<dev->chunkShift) - 1;
+ 
+ 	/*
+ 	 * Calculate chunkGroupBits.
+@@ -7133,16 +7214,15 @@ int yaffs_GutsInitialise(yaffs_Device *
+ 	bits = ShiftsGE(x);
+ 
+ 	/* Set up tnode width if wide tnodes are enabled. */
+-	if(!dev->wideTnodesDisabled){
++	if (!dev->wideTnodesDisabled) {
+ 		/* bits must be even so that we end up with 32-bit words */
+-		if(bits & 1)
++		if (bits & 1)
+ 			bits++;
+-		if(bits < 16)
++		if (bits < 16)
+ 			dev->tnodeWidth = 16;
+ 		else
+ 			dev->tnodeWidth = bits;
+-	}
+-	else
++	} else
+ 		dev->tnodeWidth = 16;
+ 
+ 	dev->tnodeMask = (1<<dev->tnodeWidth)-1;
+@@ -7193,7 +7273,7 @@ int yaffs_GutsInitialise(yaffs_Device *
+ 	dev->hasPendingPrioritisedGCs = 1; /* Assume the worst for now, will get fixed on first GC */
+ 
+ 	/* Initialise temporary buffers and caches. */
+-	if(!yaffs_InitialiseTempBuffers(dev))
++	if (!yaffs_InitialiseTempBuffers(dev))
+ 		init_failed = 1;
+ 
+ 	dev->srCache = NULL;
+@@ -7203,25 +7283,26 @@ int yaffs_GutsInitialise(yaffs_Device *
+ 	if (!init_failed &&
+ 	    dev->nShortOpCaches > 0) {
+ 		int i;
+-		__u8 *buf;
++		void *buf;
+ 		int srCacheBytes = dev->nShortOpCaches * sizeof(yaffs_ChunkCache);
+ 
+-		if (dev->nShortOpCaches > YAFFS_MAX_SHORT_OP_CACHES) {
++		if (dev->nShortOpCaches > YAFFS_MAX_SHORT_OP_CACHES)
+ 			dev->nShortOpCaches = YAFFS_MAX_SHORT_OP_CACHES;
+-		}
+ 
+-		buf = dev->srCache =  YMALLOC(srCacheBytes);
++		dev->srCache =  YMALLOC(srCacheBytes);
+ 
+-		if(dev->srCache)
+-			memset(dev->srCache,0,srCacheBytes);
++		buf = (__u8 *) dev->srCache;
++
++		if (dev->srCache)
++			memset(dev->srCache, 0, srCacheBytes);
+ 
+ 		for (i = 0; i < dev->nShortOpCaches && buf; i++) {
+ 			dev->srCache[i].object = NULL;
+ 			dev->srCache[i].lastUse = 0;
+ 			dev->srCache[i].dirty = 0;
+-			dev->srCache[i].data = buf = YMALLOC_DMA(dev->nDataBytesPerChunk);
++			dev->srCache[i].data = buf = YMALLOC_DMA(dev->totalBytesPerChunk);
+ 		}
+-		if(!buf)
++		if (!buf)
+ 			init_failed = 1;
+ 
+ 		dev->srLastUse = 0;
+@@ -7229,29 +7310,30 @@ int yaffs_GutsInitialise(yaffs_Device *
+ 
+ 	dev->cacheHits = 0;
+ 
+-	if(!init_failed){
++	if (!init_failed) {
+ 		dev->gcCleanupList = YMALLOC(dev->nChunksPerBlock * sizeof(__u32));
+-		if(!dev->gcCleanupList)
++		if (!dev->gcCleanupList)
+ 			init_failed = 1;
+ 	}
+ 
+-	if (dev->isYaffs2) {
++	if (dev->isYaffs2)
+ 		dev->useHeaderFileSize = 1;
+-	}
+-	if(!init_failed && !yaffs_InitialiseBlocks(dev))
++
++	if (!init_failed && !yaffs_InitialiseBlocks(dev))
+ 		init_failed = 1;
+ 
+ 	yaffs_InitialiseTnodes(dev);
+ 	yaffs_InitialiseObjects(dev);
+ 
+-	if(!init_failed && !yaffs_CreateInitialDirectories(dev))
++	if (!init_failed && !yaffs_CreateInitialDirectories(dev))
+ 		init_failed = 1;
+ 
+ 
+-	if(!init_failed){
++	if (!init_failed) {
+ 		/* Now scan the flash. */
+ 		if (dev->isYaffs2) {
+-			if(yaffs_CheckpointRestore(dev)) {
++			if (yaffs_CheckpointRestore(dev)) {
++				yaffs_CheckObjectDetailsLoaded(dev->rootDir);
+ 				T(YAFFS_TRACE_ALWAYS,
+ 				  (TSTR("yaffs: restored from checkpoint" TENDSTR)));
+ 			} else {
+@@ -7273,24 +7355,25 @@ int yaffs_GutsInitialise(yaffs_Device *
+ 				dev->nBackgroundDeletions = 0;
+ 				dev->oldestDirtySequence = 0;
+ 
+-				if(!init_failed && !yaffs_InitialiseBlocks(dev))
++				if (!init_failed && !yaffs_InitialiseBlocks(dev))
+ 					init_failed = 1;
+ 
+ 				yaffs_InitialiseTnodes(dev);
+ 				yaffs_InitialiseObjects(dev);
+ 
+-				if(!init_failed && !yaffs_CreateInitialDirectories(dev))
++				if (!init_failed && !yaffs_CreateInitialDirectories(dev))
+ 					init_failed = 1;
+ 
+-				if(!init_failed && !yaffs_ScanBackwards(dev))
++				if (!init_failed && !yaffs_ScanBackwards(dev))
+ 					init_failed = 1;
+ 			}
+-		}else
+-			if(!yaffs_Scan(dev))
++		} else if (!yaffs_Scan(dev))
+ 				init_failed = 1;
++
++		yaffs_StripDeletedObjects(dev);
+ 	}
+ 
+-	if(init_failed){
++	if (init_failed) {
+ 		/* Clean up the mess */
+ 		T(YAFFS_TRACE_TRACING,
+ 		  (TSTR("yaffs: yaffs_GutsInitialise() aborted.\n" TENDSTR)));
+@@ -7318,7 +7401,7 @@ int yaffs_GutsInitialise(yaffs_Device *
+ 
+ }
+ 
+-void yaffs_Deinitialise(yaffs_Device * dev)
++void yaffs_Deinitialise(yaffs_Device *dev)
+ {
+ 	if (dev->isMounted) {
+ 		int i;
+@@ -7330,7 +7413,7 @@ void yaffs_Deinitialise(yaffs_Device * d
+ 		    dev->srCache) {
+ 
+ 			for (i = 0; i < dev->nShortOpCaches; i++) {
+-				if(dev->srCache[i].data)
++				if (dev->srCache[i].data)
+ 					YFREE(dev->srCache[i].data);
+ 				dev->srCache[i].data = NULL;
+ 			}
+@@ -7341,16 +7424,17 @@ void yaffs_Deinitialise(yaffs_Device * d
+ 
+ 		YFREE(dev->gcCleanupList);
+ 
+-		for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++) {
++		for (i = 0; i < YAFFS_N_TEMP_BUFFERS; i++)
+ 			YFREE(dev->tempBuffer[i].buffer);
+-		}
+ 
+ 		dev->isMounted = 0;
+-	}
+ 
++		if (dev->deinitialiseNAND)
++			dev->deinitialiseNAND(dev);
++	}
+ }
+ 
+-static int yaffs_CountFreeChunks(yaffs_Device * dev)
++static int yaffs_CountFreeChunks(yaffs_Device *dev)
+ {
+ 	int nFree;
+ 	int b;
+@@ -7358,7 +7442,7 @@ static int yaffs_CountFreeChunks(yaffs_D
+ 	yaffs_BlockInfo *blk;
+ 
+ 	for (nFree = 0, b = dev->internalStartBlock; b <= dev->internalEndBlock;
+-	     b++) {
++			b++) {
+ 		blk = yaffs_GetBlockInfo(dev, b);
+ 
+ 		switch (blk->blockState) {
+@@ -7373,19 +7457,19 @@ static int yaffs_CountFreeChunks(yaffs_D
+ 		default:
+ 			break;
+ 		}
+-
+ 	}
+ 
+ 	return nFree;
+ }
+ 
+-int yaffs_GetNumberOfFreeChunks(yaffs_Device * dev)
++int yaffs_GetNumberOfFreeChunks(yaffs_Device *dev)
+ {
+ 	/* This is what we report to the outside world */
+ 
+ 	int nFree;
+ 	int nDirtyCacheChunks;
+ 	int blocksForCheckpoint;
++	int i;
+ 
+ #if 1
+ 	nFree = dev->nFreeChunks;
+@@ -7397,12 +7481,9 @@ int yaffs_GetNumberOfFreeChunks(yaffs_De
+ 
+ 	/* Now count the number of dirty chunks in the cache and subtract those */
+ 
+-	{
+-		int i;
+-		for (nDirtyCacheChunks = 0, i = 0; i < dev->nShortOpCaches; i++) {
+-			if (dev->srCache[i].dirty)
+-				nDirtyCacheChunks++;
+-		}
++	for (nDirtyCacheChunks = 0, i = 0; i < dev->nShortOpCaches; i++) {
++		if (dev->srCache[i].dirty)
++			nDirtyCacheChunks++;
+ 	}
+ 
+ 	nFree -= nDirtyCacheChunks;
+@@ -7410,8 +7491,8 @@ int yaffs_GetNumberOfFreeChunks(yaffs_De
+ 	nFree -= ((dev->nReservedBlocks + 1) * dev->nChunksPerBlock);
+ 
+ 	/* Now we figure out how much to reserve for the checkpoint and report that... */
+-	blocksForCheckpoint = dev->nCheckpointReservedBlocks - dev->blocksInCheckpoint;
+-	if(blocksForCheckpoint < 0)
++	blocksForCheckpoint = yaffs_CalcCheckpointBlocksRequired(dev) - dev->blocksInCheckpoint;
++	if (blocksForCheckpoint < 0)
+ 		blocksForCheckpoint = 0;
+ 
+ 	nFree -= (blocksForCheckpoint * dev->nChunksPerBlock);
+@@ -7425,12 +7506,12 @@ int yaffs_GetNumberOfFreeChunks(yaffs_De
+ 
+ static int yaffs_freeVerificationFailures;
+ 
+-static void yaffs_VerifyFreeChunks(yaffs_Device * dev)
++static void yaffs_VerifyFreeChunks(yaffs_Device *dev)
+ {
+ 	int counted;
+ 	int difference;
+ 
+-	if(yaffs_SkipVerification(dev))
++	if (yaffs_SkipVerification(dev))
+ 		return;
+ 
+ 	counted = yaffs_CountFreeChunks(dev);
+@@ -7447,23 +7528,25 @@ static void yaffs_VerifyFreeChunks(yaffs
+ 
+ /*---------------------------------------- YAFFS test code ----------------------*/
+ 
+-#define yaffs_CheckStruct(structure,syze, name) \
+-           if(sizeof(structure) != syze) \
+-	       { \
+-	         T(YAFFS_TRACE_ALWAYS,(TSTR("%s should be %d but is %d\n" TENDSTR),\
+-		 name,syze,sizeof(structure))); \
+-	         return YAFFS_FAIL; \
+-		}
++#define yaffs_CheckStruct(structure, syze, name) \
++	do { \
++		if (sizeof(structure) != syze) { \
++			T(YAFFS_TRACE_ALWAYS, (TSTR("%s should be %d but is %d\n" TENDSTR),\
++				name, syze, sizeof(structure))); \
++			return YAFFS_FAIL; \
++		} \
++	} while (0)
+ 
+ static int yaffs_CheckStructures(void)
+ {
+-/*      yaffs_CheckStruct(yaffs_Tags,8,"yaffs_Tags") */
+-/*      yaffs_CheckStruct(yaffs_TagsUnion,8,"yaffs_TagsUnion") */
+-/*      yaffs_CheckStruct(yaffs_Spare,16,"yaffs_Spare") */
++/*      yaffs_CheckStruct(yaffs_Tags,8,"yaffs_Tags"); */
++/*      yaffs_CheckStruct(yaffs_TagsUnion,8,"yaffs_TagsUnion"); */
++/*      yaffs_CheckStruct(yaffs_Spare,16,"yaffs_Spare"); */
+ #ifndef CONFIG_YAFFS_TNODE_LIST_DEBUG
+-	yaffs_CheckStruct(yaffs_Tnode, 2 * YAFFS_NTNODES_LEVEL0, "yaffs_Tnode")
++	yaffs_CheckStruct(yaffs_Tnode, 2 * YAFFS_NTNODES_LEVEL0, "yaffs_Tnode");
+ #endif
+-	    yaffs_CheckStruct(yaffs_ObjectHeader, 512, "yaffs_ObjectHeader")
+-
+-	    return YAFFS_OK;
++#ifndef CONFIG_YAFFS_WINCE
++	yaffs_CheckStruct(yaffs_ObjectHeader, 512, "yaffs_ObjectHeader");
++#endif
++	return YAFFS_OK;
+ }
+--- a/fs/yaffs2/yaffs_guts.h
++++ b/fs/yaffs2/yaffs_guts.h
+@@ -90,7 +90,7 @@
+ 
+ #define YAFFS_MAX_SHORT_OP_CACHES	20
+ 
+-#define YAFFS_N_TEMP_BUFFERS		4
++#define YAFFS_N_TEMP_BUFFERS		6
+ 
+ /* We limit the number attempts at sucessfully saving a chunk of data.
+  * Small-page devices have 32 pages per block; large-page devices have 64.
+@@ -108,6 +108,9 @@
+ #define YAFFS_LOWEST_SEQUENCE_NUMBER	0x00001000
+ #define YAFFS_HIGHEST_SEQUENCE_NUMBER	0xEFFFFF00
+ 
++/* Special sequence number for bad block that failed to be marked bad */
++#define YAFFS_SEQUENCE_BAD_BLOCK	0xFFFF0000
++
+ /* ChunkCache is used for short read/write operations.*/
+ typedef struct {
+ 	struct yaffs_ObjectStruct *object;
+@@ -134,11 +137,10 @@ typedef struct {
+ typedef struct {
+ 	unsigned chunkId:20;
+ 	unsigned serialNumber:2;
+-	unsigned byteCount:10;
++	unsigned byteCountLSB:10;
+ 	unsigned objectId:18;
+ 	unsigned ecc:12;
+-	unsigned unusedStuff:2;
+-
++	unsigned byteCountMSB:2;
+ } yaffs_Tags;
+ 
+ typedef union {
+@@ -277,13 +279,13 @@ typedef struct {
+ 
+ 	int softDeletions:10;	/* number of soft deleted pages */
+ 	int pagesInUse:10;	/* number of pages in use */
+-	yaffs_BlockState blockState:4;	/* One of the above block states */
++	unsigned blockState:4;	/* One of the above block states. NB use unsigned because enum is sometimes an int */
+ 	__u32 needsRetiring:1;	/* Data has failed on this block, need to get valid data off */
+-                        	/* and retire the block. */
+-	__u32 skipErasedCheck: 1; /* If this is set we can skip the erased check on this block */
+-	__u32 gcPrioritise: 1; 	/* An ECC check or blank check has failed on this block.
++				/* and retire the block. */
++	__u32 skipErasedCheck:1; /* If this is set we can skip the erased check on this block */
++	__u32 gcPrioritise:1; 	/* An ECC check or blank check has failed on this block.
+ 				   It should be prioritised for GC */
+-        __u32 chunkErrorStrikes:3; /* How many times we've had ecc etc failures on this block and tried to reuse it */
++	__u32 chunkErrorStrikes:3; /* How many times we've had ecc etc failures on this block and tried to reuse it */
+ 
+ #ifdef CONFIG_YAFFS_YAFFS2
+ 	__u32 hasShrinkHeader:1; /* This block has at least one shrink object header */
+@@ -300,11 +302,11 @@ typedef struct {
+ 
+ 	/* Apply to everything  */
+ 	int parentObjectId;
+-	__u16 sum__NoLongerUsed;	/* checksum of name. No longer used */
++	__u16 sum__NoLongerUsed;        /* checksum of name. No longer used */
+ 	YCHAR name[YAFFS_MAX_NAME_LENGTH + 1];
+ 
+-	/* Thes following apply to directories, files, symlinks - not hard links */
+-	__u32 yst_mode;		/* protection */
++	/* The following apply to directories, files, symlinks - not hard links */
++	__u32 yst_mode;         /* protection */
+ 
+ #ifdef CONFIG_YAFFS_WINCE
+ 	__u32 notForWinCE[5];
+@@ -331,11 +333,14 @@ typedef struct {
+ 	__u32 win_ctime[2];
+ 	__u32 win_atime[2];
+ 	__u32 win_mtime[2];
+-	__u32 roomToGrow[4];
+ #else
+-	__u32 roomToGrow[10];
++	__u32 roomToGrow[6];
++
+ #endif
++	__u32 inbandShadowsObject;
++	__u32 inbandIsShrink;
+ 
++	__u32 reservedSpace[2];
+ 	int shadowsObject;	/* This object header shadows the specified object if > 0 */
+ 
+ 	/* isShrink applies to object headers written when we shrink the file (ie resize) */
+@@ -381,7 +386,7 @@ typedef struct {
+ } yaffs_FileStructure;
+ 
+ typedef struct {
+-	struct list_head children;	/* list of child links */
++	struct ylist_head children;     /* list of child links */
+ } yaffs_DirectoryStructure;
+ 
+ typedef struct {
+@@ -418,23 +423,24 @@ struct yaffs_ObjectStruct {
+ 				 * still in the inode cache. Free of object is defered.
+ 				 * until the inode is released.
+ 				 */
++	__u8 beingCreated:1;	/* This object is still being created so skip some checks. */
+ 
+ 	__u8 serial;		/* serial number of chunk in NAND. Cached here */
+ 	__u16 sum;		/* sum of the name to speed searching */
+ 
+-	struct yaffs_DeviceStruct *myDev;	/* The device I'm on */
++	struct yaffs_DeviceStruct *myDev;       /* The device I'm on */
+ 
+-	struct list_head hashLink;	/* list of objects in this hash bucket */
++	struct ylist_head hashLink;     /* list of objects in this hash bucket */
+ 
+-	struct list_head hardLinks;	/* all the equivalent hard linked objects */
++	struct ylist_head hardLinks;    /* all the equivalent hard linked objects */
+ 
+ 	/* directory structure stuff */
+ 	/* also used for linking up the free list */
+ 	struct yaffs_ObjectStruct *parent;
+-	struct list_head siblings;
++	struct ylist_head siblings;
+ 
+ 	/* Where's my object header in NAND? */
+-	int chunkId;
++	int hdrChunk;
+ 
+ 	int nDataChunks;	/* Number of data chunks attached to the file. */
+ 
+@@ -485,7 +491,7 @@ struct yaffs_ObjectList_struct {
+ typedef struct yaffs_ObjectList_struct yaffs_ObjectList;
+ 
+ typedef struct {
+-	struct list_head list;
++	struct ylist_head list;
+ 	int count;
+ } yaffs_ObjectBucket;
+ 
+@@ -495,11 +501,10 @@ typedef struct {
+  */
+ 
+ typedef struct {
+-        int structType;
++	int structType;
+ 	__u32 objectId;
+ 	__u32 parentId;
+-	int chunkId;
+-
++	int hdrChunk;
+ 	yaffs_ObjectType variantType:3;
+ 	__u8 deleted:1;
+ 	__u8 softDeleted:1;
+@@ -511,8 +516,7 @@ typedef struct {
+ 
+ 	int nDataChunks;
+ 	__u32 fileSizeOrEquivalentObjectId;
+-
+-}yaffs_CheckpointObject;
++} yaffs_CheckpointObject;
+ 
+ /*--------------------- Temporary buffers ----------------
+  *
+@@ -528,13 +532,13 @@ typedef struct {
+ /*----------------- Device ---------------------------------*/
+ 
+ struct yaffs_DeviceStruct {
+-	struct list_head devList;
++	struct ylist_head devList;
+ 	const char *name;
+ 
+ 	/* Entry parameters set up way early. Yaffs sets up the rest.*/
+ 	int nDataBytesPerChunk;	/* Should be a power of 2 >= 512 */
+ 	int nChunksPerBlock;	/* does not need to be a power of 2 */
+-	int nBytesPerSpare;	/* spare area size */
++	int spareBytesPerChunk;	/* spare area size */
+ 	int startBlock;		/* Start block we're allowed to use */
+ 	int endBlock;		/* End block we're allowed to use */
+ 	int nReservedBlocks;	/* We want this tuneable so that we can reduce */
+@@ -544,9 +548,7 @@ struct yaffs_DeviceStruct {
+ 	/* Stuff used by the shared space checkpointing mechanism */
+ 	/* If this value is zero, then this mechanism is disabled */
+ 
+-	int nCheckpointReservedBlocks; /* Blocks to reserve for checkpoint data */
+-
+-
++/*	int nCheckpointReservedBlocks; */ /* Blocks to reserve for checkpoint data */
+ 
+ 
+ 	int nShortOpCaches;	/* If <= 0, then short op caching is disabled, else
+@@ -560,30 +562,31 @@ struct yaffs_DeviceStruct {
+ 	void *genericDevice;	/* Pointer to device context
+ 				 * On an mtd this holds the mtd pointer.
+ 				 */
+-        void *superBlock;
++	void *superBlock;
+ 
+ 	/* NAND access functions (Must be set before calling YAFFS)*/
+ 
+-	int (*writeChunkToNAND) (struct yaffs_DeviceStruct * dev,
+-				 int chunkInNAND, const __u8 * data,
+-				 const yaffs_Spare * spare);
+-	int (*readChunkFromNAND) (struct yaffs_DeviceStruct * dev,
+-				  int chunkInNAND, __u8 * data,
+-				  yaffs_Spare * spare);
+-	int (*eraseBlockInNAND) (struct yaffs_DeviceStruct * dev,
+-				 int blockInNAND);
+-	int (*initialiseNAND) (struct yaffs_DeviceStruct * dev);
++	int (*writeChunkToNAND) (struct yaffs_DeviceStruct *dev,
++					int chunkInNAND, const __u8 *data,
++					const yaffs_Spare *spare);
++	int (*readChunkFromNAND) (struct yaffs_DeviceStruct *dev,
++					int chunkInNAND, __u8 *data,
++					yaffs_Spare *spare);
++	int (*eraseBlockInNAND) (struct yaffs_DeviceStruct *dev,
++					int blockInNAND);
++	int (*initialiseNAND) (struct yaffs_DeviceStruct *dev);
++	int (*deinitialiseNAND) (struct yaffs_DeviceStruct *dev);
+ 
+ #ifdef CONFIG_YAFFS_YAFFS2
+-	int (*writeChunkWithTagsToNAND) (struct yaffs_DeviceStruct * dev,
+-					 int chunkInNAND, const __u8 * data,
+-					 const yaffs_ExtendedTags * tags);
+-	int (*readChunkWithTagsFromNAND) (struct yaffs_DeviceStruct * dev,
+-					  int chunkInNAND, __u8 * data,
+-					  yaffs_ExtendedTags * tags);
+-	int (*markNANDBlockBad) (struct yaffs_DeviceStruct * dev, int blockNo);
+-	int (*queryNANDBlock) (struct yaffs_DeviceStruct * dev, int blockNo,
+-			       yaffs_BlockState * state, int *sequenceNumber);
++	int (*writeChunkWithTagsToNAND) (struct yaffs_DeviceStruct *dev,
++					 int chunkInNAND, const __u8 *data,
++					 const yaffs_ExtendedTags *tags);
++	int (*readChunkWithTagsFromNAND) (struct yaffs_DeviceStruct *dev,
++					  int chunkInNAND, __u8 *data,
++					  yaffs_ExtendedTags *tags);
++	int (*markNANDBlockBad) (struct yaffs_DeviceStruct *dev, int blockNo);
++	int (*queryNANDBlock) (struct yaffs_DeviceStruct *dev, int blockNo,
++			       yaffs_BlockState *state, __u32 *sequenceNumber);
+ #endif
+ 
+ 	int isYaffs2;
+@@ -595,10 +598,12 @@ struct yaffs_DeviceStruct {
+ 	void (*removeObjectCallback)(struct yaffs_ObjectStruct *obj);
+ 
+ 	/* Callback to mark the superblock dirsty */
+-	void (*markSuperBlockDirty)(void * superblock);
++	void (*markSuperBlockDirty)(void *superblock);
+ 
+ 	int wideTnodesDisabled; /* Set to disable wide tnodes */
+ 
++	YCHAR *pathDividers;	/* String of legal path dividers */
++
+ 
+ 	/* End of stuff that must be set before initialisation. */
+ 
+@@ -615,16 +620,14 @@ struct yaffs_DeviceStruct {
+ 	__u32 tnodeWidth;
+ 	__u32 tnodeMask;
+ 
+-	/* Stuff to support various file offses to chunk/offset translations */
+-	/* "Crumbs" for nDataBytesPerChunk not being a power of 2 */
+-	__u32 crumbMask;
+-	__u32 crumbShift;
+-	__u32 crumbsPerChunk;
+-
+-	/* Straight shifting for nDataBytesPerChunk being a power of 2 */
+-	__u32 chunkShift;
+-	__u32 chunkMask;
+-
++	/* Stuff for figuring out file offset to chunk conversions */
++	__u32 chunkShift; /* Shift value */
++	__u32 chunkDiv;   /* Divisor after shifting: 1 for power-of-2 sizes */
++	__u32 chunkMask;  /* Mask to use for power-of-2 case */
++
++	/* Stuff to handle inband tags */
++	int inbandTags;
++	__u32 totalBytesPerChunk;
+ 
+ #ifdef __KERNEL__
+ 
+@@ -633,7 +636,7 @@ struct yaffs_DeviceStruct {
+ 	__u8 *spareBuffer;	/* For mtdif2 use. Don't know the size of the buffer
+ 				 * at compile time so we have to allocate it.
+ 				 */
+-	void (*putSuperFunc) (struct super_block * sb);
++	void (*putSuperFunc) (struct super_block *sb);
+ #endif
+ 
+ 	int isMounted;
+@@ -663,6 +666,8 @@ struct yaffs_DeviceStruct {
+ 	__u32 checkpointSum;
+ 	__u32 checkpointXor;
+ 
++	int nCheckpointBlocksRequired; /* Number of blocks needed to store current checkpoint set */
++
+ 	/* Block Info */
+ 	yaffs_BlockInfo *blockInfo;
+ 	__u8 *chunkBits;	/* bitmap of chunks in use */
+@@ -684,11 +689,15 @@ struct yaffs_DeviceStruct {
+ 	yaffs_TnodeList *allocatedTnodeList;
+ 
+ 	int isDoingGC;
++	int gcBlock;
++	int gcChunk;
+ 
+ 	int nObjectsCreated;
+ 	yaffs_Object *freeObjects;
+ 	int nFreeObjects;
+ 
++	int nHardLinks;
++
+ 	yaffs_ObjectList *allocatedObjectList;
+ 
+ 	yaffs_ObjectBucket objectBucket[YAFFS_NOBJECT_BUCKETS];
+@@ -745,8 +754,10 @@ struct yaffs_DeviceStruct {
+ 	int nBackgroundDeletions;	/* Count of background deletions. */
+ 
+ 
++	/* Temporary buffer management */
+ 	yaffs_TempBuffer tempBuffer[YAFFS_N_TEMP_BUFFERS];
+ 	int maxTemp;
++	int tempInUse;
+ 	int unmanagedTempAllocations;
+ 	int unmanagedTempDeallocations;
+ 
+@@ -758,9 +769,9 @@ struct yaffs_DeviceStruct {
+ 
+ typedef struct yaffs_DeviceStruct yaffs_Device;
+ 
+-/* The static layout of bllock usage etc is stored in the super block header */
++/* The static layout of block usage etc is stored in the super block header */
+ typedef struct {
+-        int StructType;
++	int StructType;
+ 	int version;
+ 	int checkpointStartBlock;
+ 	int checkpointEndBlock;
+@@ -773,7 +784,7 @@ typedef struct {
+  * must be preserved over unmount/mount cycles.
+  */
+ typedef struct {
+-        int structType;
++	int structType;
+ 	int nErasedBlocks;
+ 	int allocationBlock;	/* Current block being allocated off */
+ 	__u32 allocationPage;
+@@ -791,57 +802,45 @@ typedef struct {
+ 
+ 
+ typedef struct {
+-    int structType;
+-    __u32 magic;
+-    __u32 version;
+-    __u32 head;
++	int structType;
++	__u32 magic;
++	__u32 version;
++	__u32 head;
+ } yaffs_CheckpointValidity;
+ 
+-/* Function to manipulate block info */
+-static Y_INLINE yaffs_BlockInfo *yaffs_GetBlockInfo(yaffs_Device * dev, int blk)
+-{
+-	if (blk < dev->internalStartBlock || blk > dev->internalEndBlock) {
+-		T(YAFFS_TRACE_ERROR,
+-		  (TSTR
+-		   ("**>> yaffs: getBlockInfo block %d is not valid" TENDSTR),
+-		   blk));
+-		YBUG();
+-	}
+-	return &dev->blockInfo[blk - dev->internalStartBlock];
+-}
+ 
+ /*----------------------- YAFFS Functions -----------------------*/
+ 
+-int yaffs_GutsInitialise(yaffs_Device * dev);
+-void yaffs_Deinitialise(yaffs_Device * dev);
++int yaffs_GutsInitialise(yaffs_Device *dev);
++void yaffs_Deinitialise(yaffs_Device *dev);
+ 
+-int yaffs_GetNumberOfFreeChunks(yaffs_Device * dev);
++int yaffs_GetNumberOfFreeChunks(yaffs_Device *dev);
+ 
+-int yaffs_RenameObject(yaffs_Object * oldDir, const YCHAR * oldName,
+-		       yaffs_Object * newDir, const YCHAR * newName);
++int yaffs_RenameObject(yaffs_Object *oldDir, const YCHAR *oldName,
++		       yaffs_Object *newDir, const YCHAR *newName);
+ 
+-int yaffs_Unlink(yaffs_Object * dir, const YCHAR * name);
+-int yaffs_DeleteFile(yaffs_Object * obj);
++int yaffs_Unlink(yaffs_Object *dir, const YCHAR *name);
++int yaffs_DeleteObject(yaffs_Object *obj);
+ 
+-int yaffs_GetObjectName(yaffs_Object * obj, YCHAR * name, int buffSize);
+-int yaffs_GetObjectFileLength(yaffs_Object * obj);
+-int yaffs_GetObjectInode(yaffs_Object * obj);
+-unsigned yaffs_GetObjectType(yaffs_Object * obj);
+-int yaffs_GetObjectLinkCount(yaffs_Object * obj);
++int yaffs_GetObjectName(yaffs_Object *obj, YCHAR *name, int buffSize);
++int yaffs_GetObjectFileLength(yaffs_Object *obj);
++int yaffs_GetObjectInode(yaffs_Object *obj);
++unsigned yaffs_GetObjectType(yaffs_Object *obj);
++int yaffs_GetObjectLinkCount(yaffs_Object *obj);
+ 
+-int yaffs_SetAttributes(yaffs_Object * obj, struct iattr *attr);
+-int yaffs_GetAttributes(yaffs_Object * obj, struct iattr *attr);
++int yaffs_SetAttributes(yaffs_Object *obj, struct iattr *attr);
++int yaffs_GetAttributes(yaffs_Object *obj, struct iattr *attr);
+ 
+ /* File operations */
+-int yaffs_ReadDataFromFile(yaffs_Object * obj, __u8 * buffer, loff_t offset,
+-			   int nBytes);
+-int yaffs_WriteDataToFile(yaffs_Object * obj, const __u8 * buffer, loff_t offset,
+-			  int nBytes, int writeThrough);
+-int yaffs_ResizeFile(yaffs_Object * obj, loff_t newSize);
+-
+-yaffs_Object *yaffs_MknodFile(yaffs_Object * parent, const YCHAR * name,
+-			      __u32 mode, __u32 uid, __u32 gid);
+-int yaffs_FlushFile(yaffs_Object * obj, int updateTime);
++int yaffs_ReadDataFromFile(yaffs_Object *obj, __u8 *buffer, loff_t offset,
++				int nBytes);
++int yaffs_WriteDataToFile(yaffs_Object *obj, const __u8 *buffer, loff_t offset,
++				int nBytes, int writeThrough);
++int yaffs_ResizeFile(yaffs_Object *obj, loff_t newSize);
++
++yaffs_Object *yaffs_MknodFile(yaffs_Object *parent, const YCHAR *name,
++				__u32 mode, __u32 uid, __u32 gid);
++int yaffs_FlushFile(yaffs_Object *obj, int updateTime);
+ 
+ /* Flushing and checkpointing */
+ void yaffs_FlushEntireDeviceCache(yaffs_Device *dev);
+@@ -850,33 +849,33 @@ int yaffs_CheckpointSave(yaffs_Device *d
+ int yaffs_CheckpointRestore(yaffs_Device *dev);
+ 
+ /* Directory operations */
+-yaffs_Object *yaffs_MknodDirectory(yaffs_Object * parent, const YCHAR * name,
+-				   __u32 mode, __u32 uid, __u32 gid);
+-yaffs_Object *yaffs_FindObjectByName(yaffs_Object * theDir, const YCHAR * name);
+-int yaffs_ApplyToDirectoryChildren(yaffs_Object * theDir,
++yaffs_Object *yaffs_MknodDirectory(yaffs_Object *parent, const YCHAR *name,
++				__u32 mode, __u32 uid, __u32 gid);
++yaffs_Object *yaffs_FindObjectByName(yaffs_Object *theDir, const YCHAR *name);
++int yaffs_ApplyToDirectoryChildren(yaffs_Object *theDir,
+ 				   int (*fn) (yaffs_Object *));
+ 
+-yaffs_Object *yaffs_FindObjectByNumber(yaffs_Device * dev, __u32 number);
++yaffs_Object *yaffs_FindObjectByNumber(yaffs_Device *dev, __u32 number);
+ 
+ /* Link operations */
+-yaffs_Object *yaffs_Link(yaffs_Object * parent, const YCHAR * name,
+-			 yaffs_Object * equivalentObject);
++yaffs_Object *yaffs_Link(yaffs_Object *parent, const YCHAR *name,
++			 yaffs_Object *equivalentObject);
+ 
+-yaffs_Object *yaffs_GetEquivalentObject(yaffs_Object * obj);
++yaffs_Object *yaffs_GetEquivalentObject(yaffs_Object *obj);
+ 
+ /* Symlink operations */
+-yaffs_Object *yaffs_MknodSymLink(yaffs_Object * parent, const YCHAR * name,
++yaffs_Object *yaffs_MknodSymLink(yaffs_Object *parent, const YCHAR *name,
+ 				 __u32 mode, __u32 uid, __u32 gid,
+-				 const YCHAR * alias);
+-YCHAR *yaffs_GetSymlinkAlias(yaffs_Object * obj);
++				 const YCHAR *alias);
++YCHAR *yaffs_GetSymlinkAlias(yaffs_Object *obj);
+ 
+ /* Special inodes (fifos, sockets and devices) */
+-yaffs_Object *yaffs_MknodSpecial(yaffs_Object * parent, const YCHAR * name,
++yaffs_Object *yaffs_MknodSpecial(yaffs_Object *parent, const YCHAR *name,
+ 				 __u32 mode, __u32 uid, __u32 gid, __u32 rdev);
+ 
+ /* Special directories */
+-yaffs_Object *yaffs_Root(yaffs_Device * dev);
+-yaffs_Object *yaffs_LostNFound(yaffs_Device * dev);
++yaffs_Object *yaffs_Root(yaffs_Device *dev);
++yaffs_Object *yaffs_LostNFound(yaffs_Device *dev);
+ 
+ #ifdef CONFIG_YAFFS_WINCE
+ /* CONFIG_YAFFS_WINCE special stuff */
+@@ -885,18 +884,21 @@ void yfsd_WinFileTimeNow(__u32 target[2]
+ 
+ #ifdef __KERNEL__
+ 
+-void yaffs_HandleDeferedFree(yaffs_Object * obj);
++void yaffs_HandleDeferedFree(yaffs_Object *obj);
+ #endif
+ 
+ /* Debug dump  */
+-int yaffs_DumpObject(yaffs_Object * obj);
++int yaffs_DumpObject(yaffs_Object *obj);
+ 
+-void yaffs_GutsTest(yaffs_Device * dev);
++void yaffs_GutsTest(yaffs_Device *dev);
+ 
+ /* A few useful functions */
+-void yaffs_InitialiseTags(yaffs_ExtendedTags * tags);
+-void yaffs_DeleteChunk(yaffs_Device * dev, int chunkId, int markNAND, int lyn);
+-int yaffs_CheckFF(__u8 * buffer, int nBytes);
++void yaffs_InitialiseTags(yaffs_ExtendedTags *tags);
++void yaffs_DeleteChunk(yaffs_Device *dev, int chunkId, int markNAND, int lyn);
++int yaffs_CheckFF(__u8 *buffer, int nBytes);
+ void yaffs_HandleChunkError(yaffs_Device *dev, yaffs_BlockInfo *bi);
+ 
++__u8 *yaffs_GetTempBuffer(yaffs_Device *dev, int lineNo);
++void yaffs_ReleaseTempBuffer(yaffs_Device *dev, __u8 *buffer, int lineNo);
++
+ #endif
+--- a/fs/yaffs2/yaffs_mtdif1.c
++++ b/fs/yaffs2/yaffs_mtdif1.c
+@@ -26,7 +26,7 @@
+ #include "yportenv.h"
+ #include "yaffs_guts.h"
+ #include "yaffs_packedtags1.h"
+-#include "yaffs_tagscompat.h"	// for yaffs_CalcTagsECC
++#include "yaffs_tagscompat.h"	/* for yaffs_CalcTagsECC */
+ 
+ #include "linux/kernel.h"
+ #include "linux/version.h"
+@@ -34,9 +34,9 @@
+ #include "linux/mtd/mtd.h"
+ 
+ /* Don't compile this module if we don't have MTD's mtd_oob_ops interface */
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 
+-const char *yaffs_mtdif1_c_version = "$Id: yaffs_mtdif1.c,v 1.3 2007/05/15 20:16:11 ian Exp $";
++const char *yaffs_mtdif1_c_version = "$Id: yaffs_mtdif1.c,v 1.10 2009-03-09 07:41:10 charles Exp $";
+ 
+ #ifndef CONFIG_YAFFS_9BYTE_TAGS
+ # define YTAG1_SIZE 8
+@@ -89,9 +89,9 @@ static struct nand_ecclayout nand_oob_16
+  * Returns YAFFS_OK or YAFFS_FAIL.
+  */
+ int nandmtd1_WriteChunkWithTagsToNAND(yaffs_Device *dev,
+-	int chunkInNAND, const __u8 * data, const yaffs_ExtendedTags * etags)
++	int chunkInNAND, const __u8 *data, const yaffs_ExtendedTags *etags)
+ {
+-	struct mtd_info * mtd = dev->genericDevice;
++	struct mtd_info *mtd = dev->genericDevice;
+ 	int chunkBytes = dev->nDataBytesPerChunk;
+ 	loff_t addr = ((loff_t)chunkInNAND) * chunkBytes;
+ 	struct mtd_oob_ops ops;
+@@ -146,7 +146,7 @@ int nandmtd1_WriteChunkWithTagsToNAND(ya
+ 
+ /* Return with empty ExtendedTags but add eccResult.
+  */
+-static int rettags(yaffs_ExtendedTags * etags, int eccResult, int retval)
++static int rettags(yaffs_ExtendedTags *etags, int eccResult, int retval)
+ {
+ 	if (etags) {
+ 		memset(etags, 0, sizeof(*etags));
+@@ -169,9 +169,9 @@ static int rettags(yaffs_ExtendedTags *
+  * Returns YAFFS_OK or YAFFS_FAIL.
+  */
+ int nandmtd1_ReadChunkWithTagsFromNAND(yaffs_Device *dev,
+-	int chunkInNAND, __u8 * data, yaffs_ExtendedTags * etags)
++	int chunkInNAND, __u8 *data, yaffs_ExtendedTags *etags)
+ {
+-	struct mtd_info * mtd = dev->genericDevice;
++	struct mtd_info *mtd = dev->genericDevice;
+ 	int chunkBytes = dev->nDataBytesPerChunk;
+ 	loff_t addr = ((loff_t)chunkInNAND) * chunkBytes;
+ 	int eccres = YAFFS_ECC_RESULT_NO_ERROR;
+@@ -189,7 +189,7 @@ int nandmtd1_ReadChunkWithTagsFromNAND(y
+ 	ops.datbuf = data;
+ 	ops.oobbuf = (__u8 *)&pt1;
+ 
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20))
++#if (MTD_VERSION_CODE < MTD_VERSION(2, 6, 20))
+ 	/* In MTD 2.6.18 to 2.6.19 nand_base.c:nand_do_read_oob() has a bug;
+ 	 * help it out with ops.len = ops.ooblen when ops.datbuf == NULL.
+ 	 */
+@@ -284,11 +284,11 @@ int nandmtd1_ReadChunkWithTagsFromNAND(y
+  */
+ int nandmtd1_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo)
+ {
+-	struct mtd_info * mtd = dev->genericDevice;
++	struct mtd_info *mtd = dev->genericDevice;
+ 	int blocksize = dev->nChunksPerBlock * dev->nDataBytesPerChunk;
+ 	int retval;
+ 
+-	yaffs_trace(YAFFS_TRACE_BAD_BLOCKS, "marking block %d bad", blockNo);
++	yaffs_trace(YAFFS_TRACE_BAD_BLOCKS, "marking block %d bad\n", blockNo);
+ 
+ 	retval = mtd->block_markbad(mtd, (loff_t)blocksize * blockNo);
+ 	return (retval) ? YAFFS_FAIL : YAFFS_OK;
+@@ -298,7 +298,7 @@ int nandmtd1_MarkNANDBlockBad(struct yaf
+  *
+  * Returns YAFFS_OK or YAFFS_FAIL.
+  */
+-static int nandmtd1_TestPrerequists(struct mtd_info * mtd)
++static int nandmtd1_TestPrerequists(struct mtd_info *mtd)
+ {
+ 	/* 2.6.18 has mtd->ecclayout->oobavail */
+ 	/* 2.6.21 has mtd->ecclayout->oobavail and mtd->oobavail */
+@@ -323,10 +323,11 @@ static int nandmtd1_TestPrerequists(stru
+  * Always returns YAFFS_OK.
+  */
+ int nandmtd1_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+-	yaffs_BlockState * pState, int *pSequenceNumber)
++	yaffs_BlockState *pState, __u32 *pSequenceNumber)
+ {
+-	struct mtd_info * mtd = dev->genericDevice;
++	struct mtd_info *mtd = dev->genericDevice;
+ 	int chunkNo = blockNo * dev->nChunksPerBlock;
++	loff_t addr = (loff_t)chunkNo * dev->nDataBytesPerChunk;
+ 	yaffs_ExtendedTags etags;
+ 	int state = YAFFS_BLOCK_STATE_DEAD;
+ 	int seqnum = 0;
+@@ -335,21 +336,22 @@ int nandmtd1_QueryNANDBlock(struct yaffs
+ 	/* We don't yet have a good place to test for MTD config prerequists.
+ 	 * Do it here as we are called during the initial scan.
+ 	 */
+-	if (nandmtd1_TestPrerequists(mtd) != YAFFS_OK) {
++	if (nandmtd1_TestPrerequists(mtd) != YAFFS_OK)
+ 		return YAFFS_FAIL;
+-	}
+ 
+ 	retval = nandmtd1_ReadChunkWithTagsFromNAND(dev, chunkNo, NULL, &etags);
++	etags.blockBad = (mtd->block_isbad)(mtd, addr);
+ 	if (etags.blockBad) {
+ 		yaffs_trace(YAFFS_TRACE_BAD_BLOCKS,
+-			"block %d is marked bad", blockNo);
++			"block %d is marked bad\n", blockNo);
+ 		state = YAFFS_BLOCK_STATE_DEAD;
+-	}
+-	else if (etags.chunkUsed) {
++	} else if (etags.eccResult != YAFFS_ECC_RESULT_NO_ERROR) {
++		/* bad tags, need to look more closely */
++		state = YAFFS_BLOCK_STATE_NEEDS_SCANNING;
++	} else if (etags.chunkUsed) {
+ 		state = YAFFS_BLOCK_STATE_NEEDS_SCANNING;
+ 		seqnum = etags.sequenceNumber;
+-	}
+-	else {
++	} else {
+ 		state = YAFFS_BLOCK_STATE_EMPTY;
+ 	}
+ 
+@@ -360,4 +362,4 @@ int nandmtd1_QueryNANDBlock(struct yaffs
+ 	return YAFFS_OK;
+ }
+ 
+-#endif /*KERNEL_VERSION*/
++#endif /*MTD_VERSION*/
+--- a/fs/yaffs2/yaffs_mtdif1.h
++++ b/fs/yaffs2/yaffs_mtdif1.h
+@@ -14,15 +14,15 @@
+ #ifndef __YAFFS_MTDIF1_H__
+ #define __YAFFS_MTDIF1_H__
+ 
+-int nandmtd1_WriteChunkWithTagsToNAND(yaffs_Device * dev, int chunkInNAND,
+-	const __u8 * data, const yaffs_ExtendedTags * tags);
++int nandmtd1_WriteChunkWithTagsToNAND(yaffs_Device *dev, int chunkInNAND,
++	const __u8 *data, const yaffs_ExtendedTags *tags);
+ 
+-int nandmtd1_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+-	__u8 * data, yaffs_ExtendedTags * tags);
++int nandmtd1_ReadChunkWithTagsFromNAND(yaffs_Device *dev, int chunkInNAND,
++	__u8 *data, yaffs_ExtendedTags *tags);
+ 
+ int nandmtd1_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo);
+ 
+ int nandmtd1_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+-	yaffs_BlockState * state, int *sequenceNumber);
++	yaffs_BlockState *state, __u32 *sequenceNumber);
+ 
+ #endif
+--- a/fs/yaffs2/yaffs_mtdif2.c
++++ b/fs/yaffs2/yaffs_mtdif2.c
+@@ -14,7 +14,7 @@
+ /* mtd interface for YAFFS2 */
+ 
+ const char *yaffs_mtdif2_c_version =
+-    "$Id: yaffs_mtdif2.c,v 1.17 2007-02-14 01:09:06 wookey Exp $";
++	"$Id: yaffs_mtdif2.c,v 1.23 2009-03-06 17:20:53 wookey Exp $";
+ 
+ #include "yportenv.h"
+ 
+@@ -27,19 +27,23 @@ const char *yaffs_mtdif2_c_version =
+ 
+ #include "yaffs_packedtags2.h"
+ 
+-int nandmtd2_WriteChunkWithTagsToNAND(yaffs_Device * dev, int chunkInNAND,
+-				      const __u8 * data,
+-				      const yaffs_ExtendedTags * tags)
++/* NB For use with inband tags....
++ * We assume that the data buffer is of size totalBytersPerChunk so that we can also
++ * use it to load the tags.
++ */
++int nandmtd2_WriteChunkWithTagsToNAND(yaffs_Device *dev, int chunkInNAND,
++				      const __u8 *data,
++				      const yaffs_ExtendedTags *tags)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	struct mtd_oob_ops ops;
+ #else
+ 	size_t dummy;
+ #endif
+ 	int retval = 0;
+ 
+-	loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
++	loff_t addr;
+ 
+ 	yaffs_PackedTags2 pt;
+ 
+@@ -48,46 +52,40 @@ int nandmtd2_WriteChunkWithTagsToNAND(ya
+ 	   ("nandmtd2_WriteChunkWithTagsToNAND chunk %d data %p tags %p"
+ 	    TENDSTR), chunkInNAND, data, tags));
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-	if (tags)
+-		yaffs_PackTags2(&pt, tags);
+-	else
+-		BUG(); /* both tags and data should always be present */
+ 
+-	if (data) {
+-		ops.mode = MTD_OOB_AUTO;
+-		ops.ooblen = sizeof(pt);
+-		ops.len = dev->nDataBytesPerChunk;
+-		ops.ooboffs = 0;
+-		ops.datbuf = (__u8 *)data;
+-		ops.oobbuf = (void *)&pt;
+-		retval = mtd->write_oob(mtd, addr, &ops);
++	addr  = ((loff_t) chunkInNAND) * dev->totalBytesPerChunk;
++
++	/* For yaffs2 writing there must be both data and tags.
++	 * If we're using inband tags, then the tags are stuffed into
++	 * the end of the data buffer.
++	 */
++	if (!data || !tags)
++		BUG();
++	else if (dev->inbandTags) {
++		yaffs_PackedTags2TagsPart *pt2tp;
++		pt2tp = (yaffs_PackedTags2TagsPart *)(data + dev->nDataBytesPerChunk);
++		yaffs_PackTags2TagsPart(pt2tp, tags);
+ 	} else
+-		BUG(); /* both tags and data should always be present */
+-#else
+-	if (tags) {
+ 		yaffs_PackTags2(&pt, tags);
+-	}
+ 
+-	if (data && tags) {
+-		if (dev->useNANDECC)
+-			retval =
+-			    mtd->write_ecc(mtd, addr, dev->nDataBytesPerChunk,
+-					   &dummy, data, (__u8 *) & pt, NULL);
+-		else
+-			retval =
+-			    mtd->write_ecc(mtd, addr, dev->nDataBytesPerChunk,
+-					   &dummy, data, (__u8 *) & pt, NULL);
+-	} else {
+-		if (data)
+-			retval =
+-			    mtd->write(mtd, addr, dev->nDataBytesPerChunk, &dummy,
+-				       data);
+-		if (tags)
+-			retval =
+-			    mtd->write_oob(mtd, addr, mtd->oobsize, &dummy,
+-					   (__u8 *) & pt);
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
++	ops.mode = MTD_OOB_AUTO;
++	ops.ooblen = (dev->inbandTags) ? 0 : sizeof(pt);
++	ops.len = dev->totalBytesPerChunk;
++	ops.ooboffs = 0;
++	ops.datbuf = (__u8 *)data;
++	ops.oobbuf = (dev->inbandTags) ? NULL : (void *)&pt;
++	retval = mtd->write_oob(mtd, addr, &ops);
+ 
++#else
++	if (!dev->inbandTags) {
++		retval =
++		    mtd->write_ecc(mtd, addr, dev->nDataBytesPerChunk,
++				   &dummy, data, (__u8 *) &pt, NULL);
++	} else {
++		retval =
++		    mtd->write(mtd, addr, dev->totalBytesPerChunk, &dummy,
++			       data);
+ 	}
+ #endif
+ 
+@@ -97,17 +95,18 @@ int nandmtd2_WriteChunkWithTagsToNAND(ya
+ 		return YAFFS_FAIL;
+ }
+ 
+-int nandmtd2_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+-				       __u8 * data, yaffs_ExtendedTags * tags)
++int nandmtd2_ReadChunkWithTagsFromNAND(yaffs_Device *dev, int chunkInNAND,
++				       __u8 *data, yaffs_ExtendedTags *tags)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	struct mtd_oob_ops ops;
+ #endif
+ 	size_t dummy;
+ 	int retval = 0;
++	int localData = 0;
+ 
+-	loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
++	loff_t addr = ((loff_t) chunkInNAND) * dev->totalBytesPerChunk;
+ 
+ 	yaffs_PackedTags2 pt;
+ 
+@@ -116,9 +115,20 @@ int nandmtd2_ReadChunkWithTagsFromNAND(y
+ 	   ("nandmtd2_ReadChunkWithTagsFromNAND chunk %d data %p tags %p"
+ 	    TENDSTR), chunkInNAND, data, tags));
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
+-	if (data && !tags)
+-		retval = mtd->read(mtd, addr, dev->nDataBytesPerChunk,
++	if (dev->inbandTags) {
++
++		if (!data) {
++			localData = 1;
++			data = yaffs_GetTempBuffer(dev, __LINE__);
++		}
++
++
++	}
++
++
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 17))
++	if (dev->inbandTags || (data && !tags))
++		retval = mtd->read(mtd, addr, dev->totalBytesPerChunk,
+ 				&dummy, data);
+ 	else if (tags) {
+ 		ops.mode = MTD_OOB_AUTO;
+@@ -130,38 +140,42 @@ int nandmtd2_ReadChunkWithTagsFromNAND(y
+ 		retval = mtd->read_oob(mtd, addr, &ops);
+ 	}
+ #else
+-	if (data && tags) {
+-		if (dev->useNANDECC) {
+-			retval =
+-			    mtd->read_ecc(mtd, addr, dev->nDataBytesPerChunk,
+-					  &dummy, data, dev->spareBuffer,
+-					  NULL);
+-		} else {
+-			retval =
+-			    mtd->read_ecc(mtd, addr, dev->nDataBytesPerChunk,
++	if (!dev->inbandTags && data && tags) {
++
++		retval = mtd->read_ecc(mtd, addr, dev->nDataBytesPerChunk,
+ 					  &dummy, data, dev->spareBuffer,
+ 					  NULL);
+-		}
+ 	} else {
+ 		if (data)
+ 			retval =
+ 			    mtd->read(mtd, addr, dev->nDataBytesPerChunk, &dummy,
+ 				      data);
+-		if (tags)
++		if (!dev->inbandTags && tags)
+ 			retval =
+ 			    mtd->read_oob(mtd, addr, mtd->oobsize, &dummy,
+ 					  dev->spareBuffer);
+ 	}
+ #endif
+ 
+-	memcpy(&pt, dev->spareBuffer, sizeof(pt));
+ 
+-	if (tags)
+-		yaffs_UnpackTags2(tags, &pt);
++	if (dev->inbandTags) {
++		if (tags) {
++			yaffs_PackedTags2TagsPart *pt2tp;
++			pt2tp = (yaffs_PackedTags2TagsPart *)&data[dev->nDataBytesPerChunk];
++			yaffs_UnpackTags2TagsPart(tags, pt2tp);
++		}
++	} else {
++		if (tags) {
++			memcpy(&pt, dev->spareBuffer, sizeof(pt));
++			yaffs_UnpackTags2(tags, &pt);
++		}
++	}
+ 
+-	if(tags && retval == -EBADMSG && tags->eccResult == YAFFS_ECC_RESULT_NO_ERROR)
+-		tags->eccResult = YAFFS_ECC_RESULT_UNFIXED;
++	if (localData)
++		yaffs_ReleaseTempBuffer(dev, data, __LINE__);
+ 
++	if (tags && retval == -EBADMSG && tags->eccResult == YAFFS_ECC_RESULT_NO_ERROR)
++		tags->eccResult = YAFFS_ECC_RESULT_UNFIXED;
+ 	if (retval == 0)
+ 		return YAFFS_OK;
+ 	else
+@@ -178,7 +192,7 @@ int nandmtd2_MarkNANDBlockBad(struct yaf
+ 	retval =
+ 	    mtd->block_markbad(mtd,
+ 			       blockNo * dev->nChunksPerBlock *
+-			       dev->nDataBytesPerChunk);
++			       dev->totalBytesPerChunk);
+ 
+ 	if (retval == 0)
+ 		return YAFFS_OK;
+@@ -188,7 +202,7 @@ int nandmtd2_MarkNANDBlockBad(struct yaf
+ }
+ 
+ int nandmtd2_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+-			    yaffs_BlockState * state, int *sequenceNumber)
++			    yaffs_BlockState *state, __u32 *sequenceNumber)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+ 	int retval;
+@@ -198,7 +212,7 @@ int nandmtd2_QueryNANDBlock(struct yaffs
+ 	retval =
+ 	    mtd->block_isbad(mtd,
+ 			     blockNo * dev->nChunksPerBlock *
+-			     dev->nDataBytesPerChunk);
++			     dev->totalBytesPerChunk);
+ 
+ 	if (retval) {
+ 		T(YAFFS_TRACE_MTD, (TSTR("block is bad" TENDSTR)));
+--- a/fs/yaffs2/yaffs_mtdif2.h
++++ b/fs/yaffs2/yaffs_mtdif2.h
+@@ -17,13 +17,13 @@
+ #define __YAFFS_MTDIF2_H__
+ 
+ #include "yaffs_guts.h"
+-int nandmtd2_WriteChunkWithTagsToNAND(yaffs_Device * dev, int chunkInNAND,
+-				      const __u8 * data,
+-				      const yaffs_ExtendedTags * tags);
+-int nandmtd2_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+-				       __u8 * data, yaffs_ExtendedTags * tags);
++int nandmtd2_WriteChunkWithTagsToNAND(yaffs_Device *dev, int chunkInNAND,
++				const __u8 *data,
++				const yaffs_ExtendedTags *tags);
++int nandmtd2_ReadChunkWithTagsFromNAND(yaffs_Device *dev, int chunkInNAND,
++				__u8 *data, yaffs_ExtendedTags *tags);
+ int nandmtd2_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo);
+ int nandmtd2_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+-			    yaffs_BlockState * state, int *sequenceNumber);
++			yaffs_BlockState *state, __u32 *sequenceNumber);
+ 
+ #endif
+--- a/fs/yaffs2/yaffs_mtdif.c
++++ b/fs/yaffs2/yaffs_mtdif.c
+@@ -12,7 +12,7 @@
+  */
+ 
+ const char *yaffs_mtdif_c_version =
+-    "$Id: yaffs_mtdif.c,v 1.19 2007-02-14 01:09:06 wookey Exp $";
++	"$Id: yaffs_mtdif.c,v 1.22 2009-03-06 17:20:51 wookey Exp $";
+ 
+ #include "yportenv.h"
+ 
+@@ -24,7 +24,7 @@ const char *yaffs_mtdif_c_version =
+ #include "linux/time.h"
+ #include "linux/mtd/nand.h"
+ 
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18))
++#if (MTD_VERSION_CODE < MTD_VERSION(2, 6, 18))
+ static struct nand_oobinfo yaffs_oobinfo = {
+ 	.useecc = 1,
+ 	.eccbytes = 6,
+@@ -36,7 +36,7 @@ static struct nand_oobinfo yaffs_noeccin
+ };
+ #endif
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ static inline void translate_spare2oob(const yaffs_Spare *spare, __u8 *oob)
+ {
+ 	oob[0] = spare->tagByte0;
+@@ -45,8 +45,8 @@ static inline void translate_spare2oob(c
+ 	oob[3] = spare->tagByte3;
+ 	oob[4] = spare->tagByte4;
+ 	oob[5] = spare->tagByte5 & 0x3f;
+-	oob[5] |= spare->blockStatus == 'Y' ? 0: 0x80;
+-	oob[5] |= spare->pageStatus == 0 ? 0: 0x40;
++	oob[5] |= spare->blockStatus == 'Y' ? 0 : 0x80;
++	oob[5] |= spare->pageStatus == 0 ? 0 : 0x40;
+ 	oob[6] = spare->tagByte6;
+ 	oob[7] = spare->tagByte7;
+ }
+@@ -71,18 +71,18 @@ static inline void translate_oob2spare(y
+ }
+ #endif
+ 
+-int nandmtd_WriteChunkToNAND(yaffs_Device * dev, int chunkInNAND,
+-			     const __u8 * data, const yaffs_Spare * spare)
++int nandmtd_WriteChunkToNAND(yaffs_Device *dev, int chunkInNAND,
++			     const __u8 *data, const yaffs_Spare *spare)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	struct mtd_oob_ops ops;
+ #endif
+ 	size_t dummy;
+ 	int retval = 0;
+ 
+ 	loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	__u8 spareAsBytes[8]; /* OOB */
+ 
+ 	if (data && !spare)
+@@ -135,18 +135,18 @@ int nandmtd_WriteChunkToNAND(yaffs_Devic
+ 		return YAFFS_FAIL;
+ }
+ 
+-int nandmtd_ReadChunkFromNAND(yaffs_Device * dev, int chunkInNAND, __u8 * data,
+-			      yaffs_Spare * spare)
++int nandmtd_ReadChunkFromNAND(yaffs_Device *dev, int chunkInNAND, __u8 *data,
++			      yaffs_Spare *spare)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	struct mtd_oob_ops ops;
+ #endif
+ 	size_t dummy;
+ 	int retval = 0;
+ 
+ 	loff_t addr = ((loff_t) chunkInNAND) * dev->nDataBytesPerChunk;
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,17))
++#if (MTD_VERSION_CODE > MTD_VERSION(2, 6, 17))
+ 	__u8 spareAsBytes[8]; /* OOB */
+ 
+ 	if (data && !spare)
+@@ -205,7 +205,7 @@ int nandmtd_ReadChunkFromNAND(yaffs_Devi
+ 		return YAFFS_FAIL;
+ }
+ 
+-int nandmtd_EraseBlockInNAND(yaffs_Device * dev, int blockNumber)
++int nandmtd_EraseBlockInNAND(yaffs_Device *dev, int blockNumber)
+ {
+ 	struct mtd_info *mtd = (struct mtd_info *)(dev->genericDevice);
+ 	__u32 addr =
+@@ -234,7 +234,7 @@ int nandmtd_EraseBlockInNAND(yaffs_Devic
+ 		return YAFFS_FAIL;
+ }
+ 
+-int nandmtd_InitialiseNAND(yaffs_Device * dev)
++int nandmtd_InitialiseNAND(yaffs_Device *dev)
+ {
+ 	return YAFFS_OK;
+ }
+--- a/fs/yaffs2/yaffs_mtdif.h
++++ b/fs/yaffs2/yaffs_mtdif.h
+@@ -18,10 +18,15 @@
+ 
+ #include "yaffs_guts.h"
+ 
+-int nandmtd_WriteChunkToNAND(yaffs_Device * dev, int chunkInNAND,
+-			     const __u8 * data, const yaffs_Spare * spare);
+-int nandmtd_ReadChunkFromNAND(yaffs_Device * dev, int chunkInNAND, __u8 * data,
+-			      yaffs_Spare * spare);
+-int nandmtd_EraseBlockInNAND(yaffs_Device * dev, int blockNumber);
+-int nandmtd_InitialiseNAND(yaffs_Device * dev);
++#if (MTD_VERSION_CODE < MTD_VERSION(2, 6, 18))
++extern struct nand_oobinfo yaffs_oobinfo;
++extern struct nand_oobinfo yaffs_noeccinfo;
++#endif
++
++int nandmtd_WriteChunkToNAND(yaffs_Device *dev, int chunkInNAND,
++			const __u8 *data, const yaffs_Spare *spare);
++int nandmtd_ReadChunkFromNAND(yaffs_Device *dev, int chunkInNAND, __u8 *data,
++			yaffs_Spare *spare);
++int nandmtd_EraseBlockInNAND(yaffs_Device *dev, int blockNumber);
++int nandmtd_InitialiseNAND(yaffs_Device *dev);
+ #endif
+--- a/fs/yaffs2/yaffs_nand.c
++++ b/fs/yaffs2/yaffs_nand.c
+@@ -12,16 +12,17 @@
+  */
+ 
+ const char *yaffs_nand_c_version =
+-    "$Id: yaffs_nand.c,v 1.7 2007-02-14 01:09:06 wookey Exp $";
++	"$Id: yaffs_nand.c,v 1.10 2009-03-06 17:20:54 wookey Exp $";
+ 
+ #include "yaffs_nand.h"
+ #include "yaffs_tagscompat.h"
+ #include "yaffs_tagsvalidity.h"
+ 
++#include "yaffs_getblockinfo.h"
+ 
+-int yaffs_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+-					   __u8 * buffer,
+-					   yaffs_ExtendedTags * tags)
++int yaffs_ReadChunkWithTagsFromNAND(yaffs_Device *dev, int chunkInNAND,
++					   __u8 *buffer,
++					   yaffs_ExtendedTags *tags)
+ {
+ 	int result;
+ 	yaffs_ExtendedTags localTags;
+@@ -29,7 +30,7 @@ int yaffs_ReadChunkWithTagsFromNAND(yaff
+ 	int realignedChunkInNAND = chunkInNAND - dev->chunkOffset;
+ 
+ 	/* If there are no tags provided, use local tags to get prioritised gc working */
+-	if(!tags)
++	if (!tags)
+ 		tags = &localTags;
+ 
+ 	if (dev->readChunkWithTagsFromNAND)
+@@ -40,20 +41,20 @@ int yaffs_ReadChunkWithTagsFromNAND(yaff
+ 									realignedChunkInNAND,
+ 									buffer,
+ 									tags);
+-	if(tags &&
+-	   tags->eccResult > YAFFS_ECC_RESULT_NO_ERROR){
++	if (tags &&
++	   tags->eccResult > YAFFS_ECC_RESULT_NO_ERROR) {
+ 
+ 		yaffs_BlockInfo *bi = yaffs_GetBlockInfo(dev, chunkInNAND/dev->nChunksPerBlock);
+-                yaffs_HandleChunkError(dev,bi);
++		yaffs_HandleChunkError(dev, bi);
+ 	}
+ 
+ 	return result;
+ }
+ 
+-int yaffs_WriteChunkWithTagsToNAND(yaffs_Device * dev,
++int yaffs_WriteChunkWithTagsToNAND(yaffs_Device *dev,
+ 						   int chunkInNAND,
+-						   const __u8 * buffer,
+-						   yaffs_ExtendedTags * tags)
++						   const __u8 *buffer,
++						   yaffs_ExtendedTags *tags)
+ {
+ 	chunkInNAND -= dev->chunkOffset;
+ 
+@@ -84,7 +85,7 @@ int yaffs_WriteChunkWithTagsToNAND(yaffs
+ 								       tags);
+ }
+ 
+-int yaffs_MarkBlockBad(yaffs_Device * dev, int blockNo)
++int yaffs_MarkBlockBad(yaffs_Device *dev, int blockNo)
+ {
+ 	blockNo -= dev->blockOffset;
+ 
+@@ -95,10 +96,10 @@ int yaffs_MarkBlockBad(yaffs_Device * de
+ 		return yaffs_TagsCompatabilityMarkNANDBlockBad(dev, blockNo);
+ }
+ 
+-int yaffs_QueryInitialBlockState(yaffs_Device * dev,
++int yaffs_QueryInitialBlockState(yaffs_Device *dev,
+ 						 int blockNo,
+-						 yaffs_BlockState * state,
+-						 unsigned *sequenceNumber)
++						 yaffs_BlockState *state,
++						 __u32 *sequenceNumber)
+ {
+ 	blockNo -= dev->blockOffset;
+ 
+--- a/fs/yaffs2/yaffs_nandemul2k.h
++++ b/fs/yaffs2/yaffs_nandemul2k.h
+@@ -21,14 +21,14 @@
+ #include "yaffs_guts.h"
+ 
+ int nandemul2k_WriteChunkWithTagsToNAND(struct yaffs_DeviceStruct *dev,
+-					int chunkInNAND, const __u8 * data,
+-					yaffs_ExtendedTags * tags);
++					int chunkInNAND, const __u8 *data,
++					const yaffs_ExtendedTags *tags);
+ int nandemul2k_ReadChunkWithTagsFromNAND(struct yaffs_DeviceStruct *dev,
+-					 int chunkInNAND, __u8 * data,
+-					 yaffs_ExtendedTags * tags);
++					 int chunkInNAND, __u8 *data,
++					 yaffs_ExtendedTags *tags);
+ int nandemul2k_MarkNANDBlockBad(struct yaffs_DeviceStruct *dev, int blockNo);
+ int nandemul2k_QueryNANDBlock(struct yaffs_DeviceStruct *dev, int blockNo,
+-			      yaffs_BlockState * state, int *sequenceNumber);
++			      yaffs_BlockState *state, __u32 *sequenceNumber);
+ int nandemul2k_EraseBlockInNAND(struct yaffs_DeviceStruct *dev,
+ 				int blockInNAND);
+ int nandemul2k_InitialiseNAND(struct yaffs_DeviceStruct *dev);
+--- a/fs/yaffs2/yaffs_nand.h
++++ b/fs/yaffs2/yaffs_nand.h
+@@ -19,21 +19,21 @@
+ 
+ 
+ 
+-int yaffs_ReadChunkWithTagsFromNAND(yaffs_Device * dev, int chunkInNAND,
+-					   __u8 * buffer,
+-					   yaffs_ExtendedTags * tags);
+-
+-int yaffs_WriteChunkWithTagsToNAND(yaffs_Device * dev,
+-						   int chunkInNAND,
+-						   const __u8 * buffer,
+-						   yaffs_ExtendedTags * tags);
+-
+-int yaffs_MarkBlockBad(yaffs_Device * dev, int blockNo);
+-
+-int yaffs_QueryInitialBlockState(yaffs_Device * dev,
+-						 int blockNo,
+-						 yaffs_BlockState * state,
+-						 unsigned *sequenceNumber);
++int yaffs_ReadChunkWithTagsFromNAND(yaffs_Device *dev, int chunkInNAND,
++					__u8 *buffer,
++					yaffs_ExtendedTags *tags);
++
++int yaffs_WriteChunkWithTagsToNAND(yaffs_Device *dev,
++						int chunkInNAND,
++						const __u8 *buffer,
++						yaffs_ExtendedTags *tags);
++
++int yaffs_MarkBlockBad(yaffs_Device *dev, int blockNo);
++
++int yaffs_QueryInitialBlockState(yaffs_Device *dev,
++						int blockNo,
++						yaffs_BlockState *state,
++						unsigned *sequenceNumber);
+ 
+ int yaffs_EraseBlockInNAND(struct yaffs_DeviceStruct *dev,
+ 				  int blockInNAND);
+--- a/fs/yaffs2/yaffs_packedtags1.c
++++ b/fs/yaffs2/yaffs_packedtags1.c
+@@ -14,7 +14,7 @@
+ #include "yaffs_packedtags1.h"
+ #include "yportenv.h"
+ 
+-void yaffs_PackTags1(yaffs_PackedTags1 * pt, const yaffs_ExtendedTags * t)
++void yaffs_PackTags1(yaffs_PackedTags1 *pt, const yaffs_ExtendedTags *t)
+ {
+ 	pt->chunkId = t->chunkId;
+ 	pt->serialNumber = t->serialNumber;
+@@ -27,7 +27,7 @@ void yaffs_PackTags1(yaffs_PackedTags1 *
+ 
+ }
+ 
+-void yaffs_UnpackTags1(yaffs_ExtendedTags * t, const yaffs_PackedTags1 * pt)
++void yaffs_UnpackTags1(yaffs_ExtendedTags *t, const yaffs_PackedTags1 *pt)
+ {
+ 	static const __u8 allFF[] =
+ 	    { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+@@ -35,9 +35,8 @@ void yaffs_UnpackTags1(yaffs_ExtendedTag
+ 
+ 	if (memcmp(allFF, pt, sizeof(yaffs_PackedTags1))) {
+ 		t->blockBad = 0;
+-		if (pt->shouldBeFF != 0xFFFFFFFF) {
++		if (pt->shouldBeFF != 0xFFFFFFFF)
+ 			t->blockBad = 1;
+-		}
+ 		t->chunkUsed = 1;
+ 		t->objectId = pt->objectId;
+ 		t->chunkId = pt->chunkId;
+@@ -47,6 +46,5 @@ void yaffs_UnpackTags1(yaffs_ExtendedTag
+ 		t->serialNumber = pt->serialNumber;
+ 	} else {
+ 		memset(t, 0, sizeof(yaffs_ExtendedTags));
+-
+ 	}
+ }
+--- a/fs/yaffs2/yaffs_packedtags1.h
++++ b/fs/yaffs2/yaffs_packedtags1.h
+@@ -32,6 +32,6 @@ typedef struct {
+ 
+ } yaffs_PackedTags1;
+ 
+-void yaffs_PackTags1(yaffs_PackedTags1 * pt, const yaffs_ExtendedTags * t);
+-void yaffs_UnpackTags1(yaffs_ExtendedTags * t, const yaffs_PackedTags1 * pt);
++void yaffs_PackTags1(yaffs_PackedTags1 *pt, const yaffs_ExtendedTags *t);
++void yaffs_UnpackTags1(yaffs_ExtendedTags *t, const yaffs_PackedTags1 *pt);
+ #endif
+--- a/fs/yaffs2/yaffs_packedtags2.c
++++ b/fs/yaffs2/yaffs_packedtags2.c
+@@ -37,60 +37,68 @@
+ #define EXTRA_OBJECT_TYPE_SHIFT (28)
+ #define EXTRA_OBJECT_TYPE_MASK  ((0x0F) << EXTRA_OBJECT_TYPE_SHIFT)
+ 
+-static void yaffs_DumpPackedTags2(const yaffs_PackedTags2 * pt)
++
++static void yaffs_DumpPackedTags2TagsPart(const yaffs_PackedTags2TagsPart *ptt)
+ {
+ 	T(YAFFS_TRACE_MTD,
+ 	  (TSTR("packed tags obj %d chunk %d byte %d seq %d" TENDSTR),
+-	   pt->t.objectId, pt->t.chunkId, pt->t.byteCount,
+-	   pt->t.sequenceNumber));
++	   ptt->objectId, ptt->chunkId, ptt->byteCount,
++	   ptt->sequenceNumber));
++}
++static void yaffs_DumpPackedTags2(const yaffs_PackedTags2 *pt)
++{
++	yaffs_DumpPackedTags2TagsPart(&pt->t);
+ }
+ 
+-static void yaffs_DumpTags2(const yaffs_ExtendedTags * t)
++static void yaffs_DumpTags2(const yaffs_ExtendedTags *t)
+ {
+ 	T(YAFFS_TRACE_MTD,
+ 	  (TSTR
+-	   ("ext.tags eccres %d blkbad %d chused %d obj %d chunk%d byte "
+-	    "%d del %d ser %d seq %d"
++	   ("ext.tags eccres %d blkbad %d chused %d obj %d chunk%d byte %d del %d ser %d seq %d"
+ 	    TENDSTR), t->eccResult, t->blockBad, t->chunkUsed, t->objectId,
+ 	   t->chunkId, t->byteCount, t->chunkDeleted, t->serialNumber,
+ 	   t->sequenceNumber));
+ 
+ }
+ 
+-void yaffs_PackTags2(yaffs_PackedTags2 * pt, const yaffs_ExtendedTags * t)
++void yaffs_PackTags2TagsPart(yaffs_PackedTags2TagsPart *ptt,
++		const yaffs_ExtendedTags *t)
+ {
+-	pt->t.chunkId = t->chunkId;
+-	pt->t.sequenceNumber = t->sequenceNumber;
+-	pt->t.byteCount = t->byteCount;
+-	pt->t.objectId = t->objectId;
++	ptt->chunkId = t->chunkId;
++	ptt->sequenceNumber = t->sequenceNumber;
++	ptt->byteCount = t->byteCount;
++	ptt->objectId = t->objectId;
+ 
+ 	if (t->chunkId == 0 && t->extraHeaderInfoAvailable) {
+ 		/* Store the extra header info instead */
+ 		/* We save the parent object in the chunkId */
+-		pt->t.chunkId = EXTRA_HEADER_INFO_FLAG
++		ptt->chunkId = EXTRA_HEADER_INFO_FLAG
+ 			| t->extraParentObjectId;
+-		if (t->extraIsShrinkHeader) {
+-			pt->t.chunkId |= EXTRA_SHRINK_FLAG;
+-		}
+-		if (t->extraShadows) {
+-			pt->t.chunkId |= EXTRA_SHADOWS_FLAG;
+-		}
++		if (t->extraIsShrinkHeader)
++			ptt->chunkId |= EXTRA_SHRINK_FLAG;
++		if (t->extraShadows)
++			ptt->chunkId |= EXTRA_SHADOWS_FLAG;
+ 
+-		pt->t.objectId &= ~EXTRA_OBJECT_TYPE_MASK;
+-		pt->t.objectId |=
++		ptt->objectId &= ~EXTRA_OBJECT_TYPE_MASK;
++		ptt->objectId |=
+ 		    (t->extraObjectType << EXTRA_OBJECT_TYPE_SHIFT);
+ 
+-		if (t->extraObjectType == YAFFS_OBJECT_TYPE_HARDLINK) {
+-			pt->t.byteCount = t->extraEquivalentObjectId;
+-		} else if (t->extraObjectType == YAFFS_OBJECT_TYPE_FILE) {
+-			pt->t.byteCount = t->extraFileLength;
+-		} else {
+-			pt->t.byteCount = 0;
+-		}
++		if (t->extraObjectType == YAFFS_OBJECT_TYPE_HARDLINK)
++			ptt->byteCount = t->extraEquivalentObjectId;
++		else if (t->extraObjectType == YAFFS_OBJECT_TYPE_FILE)
++			ptt->byteCount = t->extraFileLength;
++		else
++			ptt->byteCount = 0;
+ 	}
+ 
+-	yaffs_DumpPackedTags2(pt);
++	yaffs_DumpPackedTags2TagsPart(ptt);
+ 	yaffs_DumpTags2(t);
++}
++
++
++void yaffs_PackTags2(yaffs_PackedTags2 *pt, const yaffs_ExtendedTags *t)
++{
++	yaffs_PackTags2TagsPart(&pt->t, t);
+ 
+ #ifndef YAFFS_IGNORE_TAGS_ECC
+ 	{
+@@ -101,82 +109,98 @@ void yaffs_PackTags2(yaffs_PackedTags2 *
+ #endif
+ }
+ 
+-void yaffs_UnpackTags2(yaffs_ExtendedTags * t, yaffs_PackedTags2 * pt)
++
++void yaffs_UnpackTags2TagsPart(yaffs_ExtendedTags *t,
++		yaffs_PackedTags2TagsPart *ptt)
+ {
+ 
+ 	memset(t, 0, sizeof(yaffs_ExtendedTags));
+ 
+ 	yaffs_InitialiseTags(t);
+ 
+-	if (pt->t.sequenceNumber != 0xFFFFFFFF) {
+-		/* Page is in use */
+-#ifdef YAFFS_IGNORE_TAGS_ECC
+-		{
+-			t->eccResult = YAFFS_ECC_RESULT_NO_ERROR;
+-		}
+-#else
+-		{
+-			yaffs_ECCOther ecc;
+-			int result;
+-			yaffs_ECCCalculateOther((unsigned char *)&pt->t,
+-						sizeof
+-						(yaffs_PackedTags2TagsPart),
+-						&ecc);
+-			result =
+-			    yaffs_ECCCorrectOther((unsigned char *)&pt->t,
+-						  sizeof
+-						  (yaffs_PackedTags2TagsPart),
+-						  &pt->ecc, &ecc);
+-			switch(result){
+-				case 0:
+-					t->eccResult = YAFFS_ECC_RESULT_NO_ERROR;
+-					break;
+-				case 1:
+-					t->eccResult = YAFFS_ECC_RESULT_FIXED;
+-					break;
+-				case -1:
+-					t->eccResult = YAFFS_ECC_RESULT_UNFIXED;
+-					break;
+-				default:
+-					t->eccResult = YAFFS_ECC_RESULT_UNKNOWN;
+-			}
+-		}
+-#endif
++	if (ptt->sequenceNumber != 0xFFFFFFFF) {
+ 		t->blockBad = 0;
+ 		t->chunkUsed = 1;
+-		t->objectId = pt->t.objectId;
+-		t->chunkId = pt->t.chunkId;
+-		t->byteCount = pt->t.byteCount;
++		t->objectId = ptt->objectId;
++		t->chunkId = ptt->chunkId;
++		t->byteCount = ptt->byteCount;
+ 		t->chunkDeleted = 0;
+ 		t->serialNumber = 0;
+-		t->sequenceNumber = pt->t.sequenceNumber;
++		t->sequenceNumber = ptt->sequenceNumber;
+ 
+ 		/* Do extra header info stuff */
+ 
+-		if (pt->t.chunkId & EXTRA_HEADER_INFO_FLAG) {
++		if (ptt->chunkId & EXTRA_HEADER_INFO_FLAG) {
+ 			t->chunkId = 0;
+ 			t->byteCount = 0;
+ 
+ 			t->extraHeaderInfoAvailable = 1;
+ 			t->extraParentObjectId =
+-			    pt->t.chunkId & (~(ALL_EXTRA_FLAGS));
++			    ptt->chunkId & (~(ALL_EXTRA_FLAGS));
+ 			t->extraIsShrinkHeader =
+-			    (pt->t.chunkId & EXTRA_SHRINK_FLAG) ? 1 : 0;
++			    (ptt->chunkId & EXTRA_SHRINK_FLAG) ? 1 : 0;
+ 			t->extraShadows =
+-			    (pt->t.chunkId & EXTRA_SHADOWS_FLAG) ? 1 : 0;
++			    (ptt->chunkId & EXTRA_SHADOWS_FLAG) ? 1 : 0;
+ 			t->extraObjectType =
+-			    pt->t.objectId >> EXTRA_OBJECT_TYPE_SHIFT;
++			    ptt->objectId >> EXTRA_OBJECT_TYPE_SHIFT;
+ 			t->objectId &= ~EXTRA_OBJECT_TYPE_MASK;
+ 
+-			if (t->extraObjectType == YAFFS_OBJECT_TYPE_HARDLINK) {
+-				t->extraEquivalentObjectId = pt->t.byteCount;
+-			} else {
+-				t->extraFileLength = pt->t.byteCount;
++			if (t->extraObjectType == YAFFS_OBJECT_TYPE_HARDLINK)
++				t->extraEquivalentObjectId = ptt->byteCount;
++			else
++				t->extraFileLength = ptt->byteCount;
++		}
++	}
++
++	yaffs_DumpPackedTags2TagsPart(ptt);
++	yaffs_DumpTags2(t);
++
++}
++
++
++void yaffs_UnpackTags2(yaffs_ExtendedTags *t, yaffs_PackedTags2 *pt)
++{
++
++	yaffs_ECCResult eccResult = YAFFS_ECC_RESULT_NO_ERROR;
++
++	if (pt->t.sequenceNumber != 0xFFFFFFFF) {
++		/* Page is in use */
++#ifndef YAFFS_IGNORE_TAGS_ECC
++		{
++			yaffs_ECCOther ecc;
++			int result;
++			yaffs_ECCCalculateOther((unsigned char *)&pt->t,
++						sizeof
++						(yaffs_PackedTags2TagsPart),
++						&ecc);
++			result =
++			    yaffs_ECCCorrectOther((unsigned char *)&pt->t,
++						  sizeof
++						  (yaffs_PackedTags2TagsPart),
++						  &pt->ecc, &ecc);
++			switch (result) {
++			case 0:
++				eccResult = YAFFS_ECC_RESULT_NO_ERROR;
++				break;
++			case 1:
++				eccResult = YAFFS_ECC_RESULT_FIXED;
++				break;
++			case -1:
++				eccResult = YAFFS_ECC_RESULT_UNFIXED;
++				break;
++			default:
++				eccResult = YAFFS_ECC_RESULT_UNKNOWN;
+ 			}
+ 		}
++#endif
+ 	}
+ 
++	yaffs_UnpackTags2TagsPart(t, &pt->t);
++
++	t->eccResult = eccResult;
++
+ 	yaffs_DumpPackedTags2(pt);
+ 	yaffs_DumpTags2(t);
+ 
+ }
++
+--- a/fs/yaffs2/yaffs_packedtags2.h
++++ b/fs/yaffs2/yaffs_packedtags2.h
+@@ -33,6 +33,11 @@ typedef struct {
+ 	yaffs_ECCOther ecc;
+ } yaffs_PackedTags2;
+ 
+-void yaffs_PackTags2(yaffs_PackedTags2 * pt, const yaffs_ExtendedTags * t);
+-void yaffs_UnpackTags2(yaffs_ExtendedTags * t, yaffs_PackedTags2 * pt);
++/* Full packed tags with ECC, used for oob tags */
++void yaffs_PackTags2(yaffs_PackedTags2 *pt, const yaffs_ExtendedTags *t);
++void yaffs_UnpackTags2(yaffs_ExtendedTags *t, yaffs_PackedTags2 *pt);
++
++/* Only the tags part (no ECC for use with inband tags */
++void yaffs_PackTags2TagsPart(yaffs_PackedTags2TagsPart *pt, const yaffs_ExtendedTags *t);
++void yaffs_UnpackTags2TagsPart(yaffs_ExtendedTags *t, yaffs_PackedTags2TagsPart *pt);
+ #endif
+--- a/fs/yaffs2/yaffs_qsort.c
++++ b/fs/yaffs2/yaffs_qsort.c
+@@ -28,12 +28,12 @@
+  */
+ 
+ #include "yportenv.h"
+-//#include <linux/string.h>
++/* #include <linux/string.h> */
+ 
+ /*
+  * Qsort routine from Bentley & McIlroy's "Engineering a Sort Function".
+  */
+-#define swapcode(TYPE, parmi, parmj, n) { 		\
++#define swapcode(TYPE, parmi, parmj, n) do { 		\
+ 	long i = (n) / sizeof (TYPE); 			\
+ 	register TYPE *pi = (TYPE *) (parmi); 		\
+ 	register TYPE *pj = (TYPE *) (parmj); 		\
+@@ -41,28 +41,29 @@
+ 		register TYPE	t = *pi;		\
+ 		*pi++ = *pj;				\
+ 		*pj++ = t;				\
+-        } while (--i > 0);				\
+-}
++	} while (--i > 0);				\
++} while (0)
+ 
+ #define SWAPINIT(a, es) swaptype = ((char *)a - (char *)0) % sizeof(long) || \
+-	es % sizeof(long) ? 2 : es == sizeof(long)? 0 : 1;
++	es % sizeof(long) ? 2 : es == sizeof(long) ? 0 : 1;
+ 
+ static __inline void
+ swapfunc(char *a, char *b, int n, int swaptype)
+ {
+ 	if (swaptype <= 1)
+-		swapcode(long, a, b, n)
++		swapcode(long, a, b, n);
+ 	else
+-		swapcode(char, a, b, n)
++		swapcode(char, a, b, n);
+ }
+ 
+-#define swap(a, b)					\
++#define yswap(a, b) do {					\
+ 	if (swaptype == 0) {				\
+ 		long t = *(long *)(a);			\
+ 		*(long *)(a) = *(long *)(b);		\
+ 		*(long *)(b) = t;			\
+ 	} else						\
+-		swapfunc(a, b, es, swaptype)
++		swapfunc(a, b, es, swaptype);		\
++} while (0)
+ 
+ #define vecswap(a, b, n) 	if ((n) > 0) swapfunc(a, b, n, swaptype)
+ 
+@@ -70,12 +71,12 @@ static __inline char *
+ med3(char *a, char *b, char *c, int (*cmp)(const void *, const void *))
+ {
+ 	return cmp(a, b) < 0 ?
+-	       (cmp(b, c) < 0 ? b : (cmp(a, c) < 0 ? c : a ))
+-              :(cmp(b, c) > 0 ? b : (cmp(a, c) < 0 ? a : c ));
++		(cmp(b, c) < 0 ? b : (cmp(a, c) < 0 ? c : a))
++		: (cmp(b, c) > 0 ? b : (cmp(a, c) < 0 ? a : c));
+ }
+ 
+ #ifndef min
+-#define min(a,b) (((a) < (b)) ? (a) : (b))
++#define min(a, b) (((a) < (b)) ? (a) : (b))
+ #endif
+ 
+ void
+@@ -92,7 +93,7 @@ loop:	SWAPINIT(a, es);
+ 		for (pm = (char *)a + es; pm < (char *) a + n * es; pm += es)
+ 			for (pl = pm; pl > (char *) a && cmp(pl - es, pl) > 0;
+ 			     pl -= es)
+-				swap(pl, pl - es);
++				yswap(pl, pl - es);
+ 		return;
+ 	}
+ 	pm = (char *)a + (n / 2) * es;
+@@ -107,7 +108,7 @@ loop:	SWAPINIT(a, es);
+ 		}
+ 		pm = med3(pl, pm, pn, cmp);
+ 	}
+-	swap(a, pm);
++	yswap(a, pm);
+ 	pa = pb = (char *)a + es;
+ 
+ 	pc = pd = (char *)a + (n - 1) * es;
+@@ -115,7 +116,7 @@ loop:	SWAPINIT(a, es);
+ 		while (pb <= pc && (r = cmp(pb, a)) <= 0) {
+ 			if (r == 0) {
+ 				swap_cnt = 1;
+-				swap(pa, pb);
++				yswap(pa, pb);
+ 				pa += es;
+ 			}
+ 			pb += es;
+@@ -123,14 +124,14 @@ loop:	SWAPINIT(a, es);
+ 		while (pb <= pc && (r = cmp(pc, a)) >= 0) {
+ 			if (r == 0) {
+ 				swap_cnt = 1;
+-				swap(pc, pd);
++				yswap(pc, pd);
+ 				pd -= es;
+ 			}
+ 			pc -= es;
+ 		}
+ 		if (pb > pc)
+ 			break;
+-		swap(pb, pc);
++		yswap(pb, pc);
+ 		swap_cnt = 1;
+ 		pb += es;
+ 		pc -= es;
+@@ -139,7 +140,7 @@ loop:	SWAPINIT(a, es);
+ 		for (pm = (char *) a + es; pm < (char *) a + n * es; pm += es)
+ 			for (pl = pm; pl > (char *) a && cmp(pl - es, pl) > 0;
+ 			     pl -= es)
+-				swap(pl, pl - es);
++				yswap(pl, pl - es);
+ 		return;
+ 	}
+ 
+@@ -148,9 +149,11 @@ loop:	SWAPINIT(a, es);
+ 	vecswap(a, pb - r, r);
+ 	r = min((long)(pd - pc), (long)(pn - pd - es));
+ 	vecswap(pb, pn - r, r);
+-	if ((r = pb - pa) > es)
++	r = pb - pa;
++	if (r > es)
+ 		yaffs_qsort(a, r / es, es, cmp);
+-	if ((r = pd - pc) > es) {
++	r = pd - pc;
++	if (r > es) {
+ 		/* Iterate rather than recurse to save stack space */
+ 		a = pn - r;
+ 		n = r / es;
+--- a/fs/yaffs2/yaffs_qsort.h
++++ b/fs/yaffs2/yaffs_qsort.h
+@@ -17,7 +17,7 @@
+ #ifndef __YAFFS_QSORT_H__
+ #define __YAFFS_QSORT_H__
+ 
+-extern void yaffs_qsort (void *const base, size_t total_elems, size_t size,
+-                   int (*cmp)(const void *, const void *));
++extern void yaffs_qsort(void *const base, size_t total_elems, size_t size,
++			int (*cmp)(const void *, const void *));
+ 
+ #endif
+--- a/fs/yaffs2/yaffs_tagscompat.c
++++ b/fs/yaffs2/yaffs_tagscompat.c
+@@ -14,16 +14,17 @@
+ #include "yaffs_guts.h"
+ #include "yaffs_tagscompat.h"
+ #include "yaffs_ecc.h"
++#include "yaffs_getblockinfo.h"
+ 
+-static void yaffs_HandleReadDataError(yaffs_Device * dev, int chunkInNAND);
++static void yaffs_HandleReadDataError(yaffs_Device *dev, int chunkInNAND);
+ #ifdef NOTYET
+-static void yaffs_CheckWrittenBlock(yaffs_Device * dev, int chunkInNAND);
+-static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+-				     const __u8 * data,
+-				     const yaffs_Spare * spare);
+-static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+-				    const yaffs_Spare * spare);
+-static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND);
++static void yaffs_CheckWrittenBlock(yaffs_Device *dev, int chunkInNAND);
++static void yaffs_HandleWriteChunkOk(yaffs_Device *dev, int chunkInNAND,
++				     const __u8 *data,
++				     const yaffs_Spare *spare);
++static void yaffs_HandleUpdateChunk(yaffs_Device *dev, int chunkInNAND,
++				    const yaffs_Spare *spare);
++static void yaffs_HandleWriteChunkError(yaffs_Device *dev, int chunkInNAND);
+ #endif
+ 
+ static const char yaffs_countBitsTable[256] = {
+@@ -54,13 +55,13 @@ int yaffs_CountBits(__u8 x)
+ 
+ /********** Tags ECC calculations  *********/
+ 
+-void yaffs_CalcECC(const __u8 * data, yaffs_Spare * spare)
++void yaffs_CalcECC(const __u8 *data, yaffs_Spare *spare)
+ {
+ 	yaffs_ECCCalculate(data, spare->ecc1);
+ 	yaffs_ECCCalculate(&data[256], spare->ecc2);
+ }
+ 
+-void yaffs_CalcTagsECC(yaffs_Tags * tags)
++void yaffs_CalcTagsECC(yaffs_Tags *tags)
+ {
+ 	/* Calculate an ecc */
+ 
+@@ -74,9 +75,8 @@ void yaffs_CalcTagsECC(yaffs_Tags * tags
+ 	for (i = 0; i < 8; i++) {
+ 		for (j = 1; j & 0xff; j <<= 1) {
+ 			bit++;
+-			if (b[i] & j) {
++			if (b[i] & j)
+ 				ecc ^= bit;
+-			}
+ 		}
+ 	}
+ 
+@@ -84,7 +84,7 @@ void yaffs_CalcTagsECC(yaffs_Tags * tags
+ 
+ }
+ 
+-int yaffs_CheckECCOnTags(yaffs_Tags * tags)
++int yaffs_CheckECCOnTags(yaffs_Tags *tags)
+ {
+ 	unsigned ecc = tags->ecc;
+ 
+@@ -115,8 +115,8 @@ int yaffs_CheckECCOnTags(yaffs_Tags * ta
+ 
+ /********** Tags **********/
+ 
+-static void yaffs_LoadTagsIntoSpare(yaffs_Spare * sparePtr,
+-				    yaffs_Tags * tagsPtr)
++static void yaffs_LoadTagsIntoSpare(yaffs_Spare *sparePtr,
++				yaffs_Tags *tagsPtr)
+ {
+ 	yaffs_TagsUnion *tu = (yaffs_TagsUnion *) tagsPtr;
+ 
+@@ -132,8 +132,8 @@ static void yaffs_LoadTagsIntoSpare(yaff
+ 	sparePtr->tagByte7 = tu->asBytes[7];
+ }
+ 
+-static void yaffs_GetTagsFromSpare(yaffs_Device * dev, yaffs_Spare * sparePtr,
+-				   yaffs_Tags * tagsPtr)
++static void yaffs_GetTagsFromSpare(yaffs_Device *dev, yaffs_Spare *sparePtr,
++				yaffs_Tags *tagsPtr)
+ {
+ 	yaffs_TagsUnion *tu = (yaffs_TagsUnion *) tagsPtr;
+ 	int result;
+@@ -148,21 +148,20 @@ static void yaffs_GetTagsFromSpare(yaffs
+ 	tu->asBytes[7] = sparePtr->tagByte7;
+ 
+ 	result = yaffs_CheckECCOnTags(tagsPtr);
+-	if (result > 0) {
++	if (result > 0)
+ 		dev->tagsEccFixed++;
+-	} else if (result < 0) {
++	else if (result < 0)
+ 		dev->tagsEccUnfixed++;
+-	}
+ }
+ 
+-static void yaffs_SpareInitialise(yaffs_Spare * spare)
++static void yaffs_SpareInitialise(yaffs_Spare *spare)
+ {
+ 	memset(spare, 0xFF, sizeof(yaffs_Spare));
+ }
+ 
+ static int yaffs_WriteChunkToNAND(struct yaffs_DeviceStruct *dev,
+-				  int chunkInNAND, const __u8 * data,
+-				  yaffs_Spare * spare)
++				int chunkInNAND, const __u8 *data,
++				yaffs_Spare *spare)
+ {
+ 	if (chunkInNAND < dev->startBlock * dev->nChunksPerBlock) {
+ 		T(YAFFS_TRACE_ERROR,
+@@ -177,9 +176,9 @@ static int yaffs_WriteChunkToNAND(struct
+ 
+ static int yaffs_ReadChunkFromNAND(struct yaffs_DeviceStruct *dev,
+ 				   int chunkInNAND,
+-				   __u8 * data,
+-				   yaffs_Spare * spare,
+-				   yaffs_ECCResult * eccResult,
++				   __u8 *data,
++				   yaffs_Spare *spare,
++				   yaffs_ECCResult *eccResult,
+ 				   int doErrorCorrection)
+ {
+ 	int retVal;
+@@ -252,9 +251,11 @@ static int yaffs_ReadChunkFromNAND(struc
+ 		/* Must allocate enough memory for spare+2*sizeof(int) */
+ 		/* for ecc results from device. */
+ 		struct yaffs_NANDSpare nspare;
+-		retVal =
+-		    dev->readChunkFromNAND(dev, chunkInNAND, data,
+-					   (yaffs_Spare *) & nspare);
++
++		memset(&nspare, 0, sizeof(nspare));
++
++		retVal = dev->readChunkFromNAND(dev, chunkInNAND, data,
++					(yaffs_Spare *) &nspare);
+ 		memcpy(spare, &nspare, sizeof(yaffs_Spare));
+ 		if (data && doErrorCorrection) {
+ 			if (nspare.eccres1 > 0) {
+@@ -302,8 +303,7 @@ static int yaffs_ReadChunkFromNAND(struc
+ static int yaffs_CheckChunkErased(struct yaffs_DeviceStruct *dev,
+ 				  int chunkInNAND)
+ {
+-
+-	static int init = 0;
++	static int init;
+ 	static __u8 cmpbuf[YAFFS_BYTES_PER_CHUNK];
+ 	static __u8 data[YAFFS_BYTES_PER_CHUNK];
+ 	/* Might as well always allocate the larger size for */
+@@ -331,12 +331,12 @@ static int yaffs_CheckChunkErased(struct
+  * Functions for robustisizing
+  */
+ 
+-static void yaffs_HandleReadDataError(yaffs_Device * dev, int chunkInNAND)
++static void yaffs_HandleReadDataError(yaffs_Device *dev, int chunkInNAND)
+ {
+ 	int blockInNAND = chunkInNAND / dev->nChunksPerBlock;
+ 
+ 	/* Mark the block for retirement */
+-	yaffs_GetBlockInfo(dev, blockInNAND)->needsRetiring = 1;
++	yaffs_GetBlockInfo(dev, blockInNAND + dev->blockOffset)->needsRetiring = 1;
+ 	T(YAFFS_TRACE_ERROR | YAFFS_TRACE_BAD_BLOCKS,
+ 	  (TSTR("**>>Block %d marked for retirement" TENDSTR), blockInNAND));
+ 
+@@ -348,22 +348,22 @@ static void yaffs_HandleReadDataError(ya
+ }
+ 
+ #ifdef NOTYET
+-static void yaffs_CheckWrittenBlock(yaffs_Device * dev, int chunkInNAND)
++static void yaffs_CheckWrittenBlock(yaffs_Device *dev, int chunkInNAND)
+ {
+ }
+ 
+-static void yaffs_HandleWriteChunkOk(yaffs_Device * dev, int chunkInNAND,
+-				     const __u8 * data,
+-				     const yaffs_Spare * spare)
++static void yaffs_HandleWriteChunkOk(yaffs_Device *dev, int chunkInNAND,
++				     const __u8 *data,
++				     const yaffs_Spare *spare)
+ {
+ }
+ 
+-static void yaffs_HandleUpdateChunk(yaffs_Device * dev, int chunkInNAND,
+-				    const yaffs_Spare * spare)
++static void yaffs_HandleUpdateChunk(yaffs_Device *dev, int chunkInNAND,
++				    const yaffs_Spare *spare)
+ {
+ }
+ 
+-static void yaffs_HandleWriteChunkError(yaffs_Device * dev, int chunkInNAND)
++static void yaffs_HandleWriteChunkError(yaffs_Device *dev, int chunkInNAND)
+ {
+ 	int blockInNAND = chunkInNAND / dev->nChunksPerBlock;
+ 
+@@ -373,8 +373,8 @@ static void yaffs_HandleWriteChunkError(
+ 	yaffs_DeleteChunk(dev, chunkInNAND, 1, __LINE__);
+ }
+ 
+-static int yaffs_VerifyCompare(const __u8 * d0, const __u8 * d1,
+-			       const yaffs_Spare * s0, const yaffs_Spare * s1)
++static int yaffs_VerifyCompare(const __u8 *d0, const __u8 *d1,
++			       const yaffs_Spare *s0, const yaffs_Spare *s1)
+ {
+ 
+ 	if (memcmp(d0, d1, YAFFS_BYTES_PER_CHUNK) != 0 ||
+@@ -398,28 +398,35 @@ static int yaffs_VerifyCompare(const __u
+ }
+ #endif				/* NOTYET */
+ 
+-int yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(yaffs_Device * dev,
+-						    int chunkInNAND,
+-						    const __u8 * data,
+-						    const yaffs_ExtendedTags *
+-						    eTags)
++int yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(yaffs_Device *dev,
++						int chunkInNAND,
++						const __u8 *data,
++						const yaffs_ExtendedTags *eTags)
+ {
+ 	yaffs_Spare spare;
+ 	yaffs_Tags tags;
+ 
+ 	yaffs_SpareInitialise(&spare);
+ 
+-	if (eTags->chunkDeleted) {
++	if (eTags->chunkDeleted)
+ 		spare.pageStatus = 0;
+-	} else {
++	else {
+ 		tags.objectId = eTags->objectId;
+ 		tags.chunkId = eTags->chunkId;
+-		tags.byteCount = eTags->byteCount;
++
++		tags.byteCountLSB = eTags->byteCount & 0x3ff;
++
++		if (dev->nDataBytesPerChunk >= 1024)
++			tags.byteCountMSB = (eTags->byteCount >> 10) & 3;
++		else
++			tags.byteCountMSB = 3;
++
++
+ 		tags.serialNumber = eTags->serialNumber;
+ 
+-		if (!dev->useNANDECC && data) {
++		if (!dev->useNANDECC && data)
+ 			yaffs_CalcECC(data, &spare);
+-		}
++
+ 		yaffs_LoadTagsIntoSpare(&spare, &tags);
+ 
+ 	}
+@@ -427,15 +434,15 @@ int yaffs_TagsCompatabilityWriteChunkWit
+ 	return yaffs_WriteChunkToNAND(dev, chunkInNAND, data, &spare);
+ }
+ 
+-int yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(yaffs_Device * dev,
++int yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(yaffs_Device *dev,
+ 						     int chunkInNAND,
+-						     __u8 * data,
+-						     yaffs_ExtendedTags * eTags)
++						     __u8 *data,
++						     yaffs_ExtendedTags *eTags)
+ {
+ 
+ 	yaffs_Spare spare;
+ 	yaffs_Tags tags;
+-	yaffs_ECCResult eccResult;
++	yaffs_ECCResult eccResult = YAFFS_ECC_RESULT_UNKNOWN;
+ 
+ 	static yaffs_Spare spareFF;
+ 	static int init;
+@@ -466,7 +473,11 @@ int yaffs_TagsCompatabilityReadChunkWith
+ 
+ 				eTags->objectId = tags.objectId;
+ 				eTags->chunkId = tags.chunkId;
+-				eTags->byteCount = tags.byteCount;
++				eTags->byteCount = tags.byteCountLSB;
++
++				if (dev->nDataBytesPerChunk >= 1024)
++					eTags->byteCount |= (((unsigned) tags.byteCountMSB) << 10);
++
+ 				eTags->serialNumber = tags.serialNumber;
+ 			}
+ 		}
+@@ -497,9 +508,9 @@ int yaffs_TagsCompatabilityMarkNANDBlock
+ }
+ 
+ int yaffs_TagsCompatabilityQueryNANDBlock(struct yaffs_DeviceStruct *dev,
+-					  int blockNo, yaffs_BlockState *
+-					  state,
+-					  int *sequenceNumber)
++					  int blockNo,
++					  yaffs_BlockState *state,
++					  __u32 *sequenceNumber)
+ {
+ 
+ 	yaffs_Spare spare0, spare1;
+--- a/fs/yaffs2/yaffs_tagscompat.h
++++ b/fs/yaffs2/yaffs_tagscompat.h
+@@ -17,24 +17,23 @@
+ #define __YAFFS_TAGSCOMPAT_H__
+ 
+ #include "yaffs_guts.h"
+-int yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(yaffs_Device * dev,
+-						    int chunkInNAND,
+-						    const __u8 * data,
+-						    const yaffs_ExtendedTags *
+-						    tags);
+-int yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(yaffs_Device * dev,
+-						     int chunkInNAND,
+-						     __u8 * data,
+-						     yaffs_ExtendedTags *
+-						     tags);
++int yaffs_TagsCompatabilityWriteChunkWithTagsToNAND(yaffs_Device *dev,
++						int chunkInNAND,
++						const __u8 *data,
++						const yaffs_ExtendedTags *tags);
++int yaffs_TagsCompatabilityReadChunkWithTagsFromNAND(yaffs_Device *dev,
++						int chunkInNAND,
++						__u8 *data,
++						yaffs_ExtendedTags *tags);
+ int yaffs_TagsCompatabilityMarkNANDBlockBad(struct yaffs_DeviceStruct *dev,
+ 					    int blockNo);
+ int yaffs_TagsCompatabilityQueryNANDBlock(struct yaffs_DeviceStruct *dev,
+-					  int blockNo, yaffs_BlockState *
+-					  state, int *sequenceNumber);
++					  int blockNo,
++					  yaffs_BlockState *state,
++					  __u32 *sequenceNumber);
+ 
+-void yaffs_CalcTagsECC(yaffs_Tags * tags);
+-int yaffs_CheckECCOnTags(yaffs_Tags * tags);
++void yaffs_CalcTagsECC(yaffs_Tags *tags);
++int yaffs_CheckECCOnTags(yaffs_Tags *tags);
+ int yaffs_CountBits(__u8 byte);
+ 
+ #endif
+--- a/fs/yaffs2/yaffs_tagsvalidity.c
++++ b/fs/yaffs2/yaffs_tagsvalidity.c
+@@ -13,14 +13,14 @@
+ 
+ #include "yaffs_tagsvalidity.h"
+ 
+-void yaffs_InitialiseTags(yaffs_ExtendedTags * tags)
++void yaffs_InitialiseTags(yaffs_ExtendedTags *tags)
+ {
+ 	memset(tags, 0, sizeof(yaffs_ExtendedTags));
+ 	tags->validMarker0 = 0xAAAAAAAA;
+ 	tags->validMarker1 = 0x55555555;
+ }
+ 
+-int yaffs_ValidateTags(yaffs_ExtendedTags * tags)
++int yaffs_ValidateTags(yaffs_ExtendedTags *tags)
+ {
+ 	return (tags->validMarker0 == 0xAAAAAAAA &&
+ 		tags->validMarker1 == 0x55555555);
+--- a/fs/yaffs2/yaffs_tagsvalidity.h
++++ b/fs/yaffs2/yaffs_tagsvalidity.h
+@@ -19,6 +19,6 @@
+ 
+ #include "yaffs_guts.h"
+ 
+-void yaffs_InitialiseTags(yaffs_ExtendedTags * tags);
+-int yaffs_ValidateTags(yaffs_ExtendedTags * tags);
++void yaffs_InitialiseTags(yaffs_ExtendedTags *tags);
++int yaffs_ValidateTags(yaffs_ExtendedTags *tags);
+ #endif
+--- a/fs/yaffs2/yportenv.h
++++ b/fs/yaffs2/yportenv.h
+@@ -17,17 +17,28 @@
+ #ifndef __YPORTENV_H__
+ #define __YPORTENV_H__
+ 
++/*
++ * Define the MTD version in terms of Linux Kernel versions
++ * This allows yaffs to be used independantly of the kernel
++ * as well as with it.
++ */
++
++#define MTD_VERSION(a, b, c) (((a) << 16) + ((b) << 8) + (c))
++
+ #if defined CONFIG_YAFFS_WINCE
+ 
+ #include "ywinceenv.h"
+ 
+-#elif  defined __KERNEL__
++#elif defined __KERNEL__
+ 
+ #include "moduleconfig.h"
+ 
+ /* Linux kernel */
++
+ #include <linux/version.h>
+-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19))
++#define MTD_VERSION_CODE LINUX_VERSION_CODE
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 19))
+ #include <linux/config.h>
+ #endif
+ #include <linux/kernel.h>
+@@ -40,12 +51,13 @@
+ #define YCHAR char
+ #define YUCHAR unsigned char
+ #define _Y(x)     x
+-#define yaffs_strcpy(a,b)    strcpy(a,b)
+-#define yaffs_strncpy(a,b,c) strncpy(a,b,c)
+-#define yaffs_strncmp(a,b,c) strncmp(a,b,c)
+-#define yaffs_strlen(s)	     strlen(s)
+-#define yaffs_sprintf	     sprintf
+-#define yaffs_toupper(a)     toupper(a)
++#define yaffs_strcat(a, b)     strcat(a, b)
++#define yaffs_strcpy(a, b)     strcpy(a, b)
++#define yaffs_strncpy(a, b, c) strncpy(a, b, c)
++#define yaffs_strncmp(a, b, c) strncmp(a, b, c)
++#define yaffs_strlen(s)	       strlen(s)
++#define yaffs_sprintf	       sprintf
++#define yaffs_toupper(a)       toupper(a)
+ 
+ #define Y_INLINE inline
+ 
+@@ -53,19 +65,19 @@
+ #define YAFFS_LOSTNFOUND_PREFIX		"obj"
+ 
+ /* #define YPRINTF(x) printk x */
+-#define YMALLOC(x) kmalloc(x,GFP_KERNEL)
++#define YMALLOC(x) kmalloc(x, GFP_NOFS)
+ #define YFREE(x)   kfree(x)
+ #define YMALLOC_ALT(x) vmalloc(x)
+ #define YFREE_ALT(x)   vfree(x)
+ #define YMALLOC_DMA(x) YMALLOC(x)
+ 
+-// KR - added for use in scan so processes aren't blocked indefinitely.
++/* KR - added for use in scan so processes aren't blocked indefinitely. */
+ #define YYIELD() schedule()
+ 
+ #define YAFFS_ROOT_MODE			0666
+ #define YAFFS_LOSTNFOUND_MODE		0666
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 0))
+ #define Y_CURRENT_TIME CURRENT_TIME.tv_sec
+ #define Y_TIME_CONVERT(x) (x).tv_sec
+ #else
+@@ -73,11 +85,12 @@
+ #define Y_TIME_CONVERT(x) (x)
+ #endif
+ 
+-#define yaffs_SumCompare(x,y) ((x) == (y))
+-#define yaffs_strcmp(a,b) strcmp(a,b)
++#define yaffs_SumCompare(x, y) ((x) == (y))
++#define yaffs_strcmp(a, b) strcmp(a, b)
+ 
+ #define TENDSTR "\n"
+ #define TSTR(x) KERN_WARNING x
++#define TCONT(x) x
+ #define TOUT(p) printk p
+ 
+ #define yaffs_trace(mask, fmt, args...) \
+@@ -90,6 +103,8 @@
+ 
+ #elif defined CONFIG_YAFFS_DIRECT
+ 
++#define MTD_VERSION_CODE MTD_VERSION(2, 6, 22)
++
+ /* Direct interface */
+ #include "ydirectenv.h"
+ 
+@@ -111,11 +126,12 @@
+ #define YCHAR char
+ #define YUCHAR unsigned char
+ #define _Y(x)     x
+-#define yaffs_strcpy(a,b)    strcpy(a,b)
+-#define yaffs_strncpy(a,b,c) strncpy(a,b,c)
+-#define yaffs_strlen(s)	     strlen(s)
+-#define yaffs_sprintf	     sprintf
+-#define yaffs_toupper(a)     toupper(a)
++#define yaffs_strcat(a, b)     strcat(a, b)
++#define yaffs_strcpy(a, b)     strcpy(a, b)
++#define yaffs_strncpy(a, b, c) strncpy(a, b, c)
++#define yaffs_strlen(s)	       strlen(s)
++#define yaffs_sprintf	       sprintf
++#define yaffs_toupper(a)       toupper(a)
+ 
+ #define Y_INLINE inline
+ 
+@@ -133,8 +149,8 @@
+ #define YAFFS_ROOT_MODE				0666
+ #define YAFFS_LOSTNFOUND_MODE		0666
+ 
+-#define yaffs_SumCompare(x,y) ((x) == (y))
+-#define yaffs_strcmp(a,b) strcmp(a,b)
++#define yaffs_SumCompare(x, y) ((x) == (y))
++#define yaffs_strcmp(a, b) strcmp(a, b)
+ 
+ #else
+ /* Should have specified a configuration type */
+@@ -178,10 +194,10 @@ extern unsigned int yaffs_wr_attempts;
+ #define YAFFS_TRACE_ALWAYS		0xF0000000
+ 
+ 
+-#define T(mask,p) do{ if((mask) & (yaffs_traceMask | YAFFS_TRACE_ALWAYS)) TOUT(p);} while(0)
++#define T(mask, p) do { if ((mask) & (yaffs_traceMask | YAFFS_TRACE_ALWAYS)) TOUT(p); } while (0)
+ 
+-#ifndef CONFIG_YAFFS_WINCE
+-#define YBUG() T(YAFFS_TRACE_BUG,(TSTR("==>> yaffs bug: " __FILE__ " %d" TENDSTR),__LINE__))
++#ifndef YBUG
++#define YBUG() do {T(YAFFS_TRACE_BUG, (TSTR("==>> yaffs bug: " __FILE__ " %d" TENDSTR), __LINE__)); } while (0)
+ #endif
+ 
+ #endif
diff --git a/target/linux/generic/patches-2.6.35/600-phy_extension.patch b/target/linux/generic/patches-2.6.35/600-phy_extension.patch
new file mode 100644
index 0000000000..7ae6d2ab00
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/600-phy_extension.patch
@@ -0,0 +1,81 @@
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -298,6 +298,50 @@ int phy_ethtool_gset(struct phy_device *
+ }
+ EXPORT_SYMBOL(phy_ethtool_gset);
+ 
++int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr)
++{
++	u32 cmd;
++	int tmp;
++	struct ethtool_cmd ecmd = { ETHTOOL_GSET };
++	struct ethtool_value edata = { ETHTOOL_GLINK };
++
++	if (get_user(cmd, (u32 *) useraddr))
++		return -EFAULT;
++
++	switch (cmd) {
++	case ETHTOOL_GSET:
++		phy_ethtool_gset(phydev, &ecmd);
++		if (copy_to_user(useraddr, &ecmd, sizeof(ecmd)))
++			return -EFAULT;
++		return 0;
++
++	case ETHTOOL_SSET:
++		if (copy_from_user(&ecmd, useraddr, sizeof(ecmd)))
++			return -EFAULT;
++		return phy_ethtool_sset(phydev, &ecmd);
++
++	case ETHTOOL_NWAY_RST:
++		/* if autoneg is off, it's an error */
++		tmp = phy_read(phydev, MII_BMCR);
++		if (tmp & BMCR_ANENABLE) {
++			tmp |= (BMCR_ANRESTART);
++			phy_write(phydev, MII_BMCR, tmp);
++			return 0;
++		}
++		return -EINVAL;
++
++	case ETHTOOL_GLINK:
++		edata.data = (phy_read(phydev,
++				MII_BMSR) & BMSR_LSTATUS) ? 1 : 0;
++		if (copy_to_user(useraddr, &edata, sizeof(edata)))
++			return -EFAULT;
++		return 0;
++	}
++
++	return -EOPNOTSUPP;
++}
++EXPORT_SYMBOL(phy_ethtool_ioctl);
++
+ /**
+  * phy_mii_ioctl - generic PHY MII ioctl interface
+  * @phydev: the phy_device struct
+@@ -351,7 +395,7 @@ int phy_mii_ioctl(struct phy_device *phy
+ 		}
+ 
+ 		phy_write(phydev, mii_data->reg_num, val);
+-		
++
+ 		if (mii_data->reg_num == MII_BMCR &&
+ 		    val & BMCR_RESET &&
+ 		    phydev->drv->config_init) {
+@@ -465,7 +509,7 @@ static void phy_force_reduction(struct p
+ 	int idx;
+ 
+ 	idx = phy_find_setting(phydev->speed, phydev->duplex);
+-	
++
+ 	idx++;
+ 
+ 	idx = phy_find_valid(idx, phydev->supported);
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -492,6 +492,7 @@ void phy_start_machine(struct phy_device
+ void phy_stop_machine(struct phy_device *phydev);
+ int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
+ int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
++int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr);
+ int phy_mii_ioctl(struct phy_device *phydev,
+ 		struct mii_ioctl_data *mii_data, int cmd);
+ int phy_start_interrupts(struct phy_device *phydev);
diff --git a/target/linux/generic/patches-2.6.35/601-phy-add-aneg-done-function.patch b/target/linux/generic/patches-2.6.35/601-phy-add-aneg-done-function.patch
new file mode 100644
index 0000000000..aac38ff2e7
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/601-phy-add-aneg-done-function.patch
@@ -0,0 +1,45 @@
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -393,9 +393,18 @@ struct phy_driver {
+ 	 */
+ 	int (*config_aneg)(struct phy_device *phydev);
+ 
++	/* Determine if autonegotiation is done */
++	int (*aneg_done)(struct phy_device *phydev);
++
+ 	/* Determines the negotiated speed and duplex */
+ 	int (*read_status)(struct phy_device *phydev);
+ 
++	/* 
++	 * Update the value in phydev->link to reflect the 
++	 * current link value
++	 */
++	int (*update_link)(struct phy_device *phydev);
++
+ 	/* Clears any pending interrupts */
+ 	int (*ack_interrupt)(struct phy_device *phydev);
+ 
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -695,6 +695,9 @@ int genphy_update_link(struct phy_device
+ {
+ 	int status;
+ 
++	if (phydev->drv->update_link)
++		return phydev->drv->update_link(phydev);
++
+ 	/* Do a fake read */
+ 	status = phy_read(phydev, MII_BMSR);
+ 
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -107,6 +107,9 @@ static inline int phy_aneg_done(struct p
+ {
+ 	int retval;
+ 
++	if (phydev->drv->aneg_done)
++		return phydev->drv->aneg_done(phydev);
++
+ 	retval = phy_read(phydev, MII_BMSR);
+ 
+ 	return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE);
diff --git a/target/linux/generic/patches-2.6.35/620-phy_adm6996.patch b/target/linux/generic/patches-2.6.35/620-phy_adm6996.patch
new file mode 100644
index 0000000000..86bab7a1eb
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/620-phy_adm6996.patch
@@ -0,0 +1,24 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -93,6 +93,11 @@ config MICREL_PHY
+ 	---help---
+ 	  Supports the KSZ9021, VSC8201, KS8001 PHYs.
+ 
++config ADM6996_PHY
++	tristate "Driver for ADM6996 switches"
++	---help---
++	  Currently supports the ADM6996F switch
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -13,6 +13,7 @@ obj-$(CONFIG_VITESSE_PHY)	+= vitesse.o
+ obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
+ obj-$(CONFIG_BCM63XX_PHY)	+= bcm63xx.o
+ obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
++obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
diff --git a/target/linux/generic/patches-2.6.35/630-phy_packets.patch b/target/linux/generic/patches-2.6.35/630-phy_packets.patch
new file mode 100644
index 0000000000..fd6d0d2438
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/630-phy_packets.patch
@@ -0,0 +1,63 @@
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -146,6 +146,18 @@ int phy_scan_fixups(struct phy_device *p
+ }
+ EXPORT_SYMBOL(phy_scan_fixups);
+ 
++static int generic_receive_skb(struct sk_buff *skb)
++{
++	skb->protocol = eth_type_trans(skb, skb->dev);
++	return netif_receive_skb(skb);
++}
++
++static int generic_rx(struct sk_buff *skb)
++{
++	skb->protocol = eth_type_trans(skb, skb->dev);
++	return netif_rx(skb);
++}
++
+ struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
+ {
+ 	struct phy_device *dev;
+@@ -175,6 +187,8 @@ struct phy_device* phy_device_create(str
+ 	dev_set_name(&dev->dev, PHY_ID_FMT, bus->id, addr);
+ 
+ 	dev->state = PHY_DOWN;
++	dev->netif_receive_skb = &generic_receive_skb;
++	dev->netif_rx = &generic_rx;
+ 
+ 	mutex_init(&dev->lock);
+ 	INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine);
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -325,6 +325,20 @@ struct phy_device {
+ 	void (*adjust_link)(struct net_device *dev);
+ 
+ 	void (*adjust_state)(struct net_device *dev);
++
++	/*
++	 * By default these point to the original functions
++	 * with the same name. adding them to the phy_device
++	 * allows the phy driver to override them for packet
++	 * mangling if the ethernet driver supports it
++	 * This is required to support some really horrible
++	 * switches such as the Marvell 88E6060
++	 */
++	int (*netif_receive_skb)(struct sk_buff *skb);
++	int (*netif_rx)(struct sk_buff *skb);
++
++	/* alignment offset for packets */
++	int pkt_align;
+ };
+ #define to_phy_device(d) container_of(d, struct phy_device, dev)
+ 
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -863,6 +863,7 @@ struct net_device {
+ 	void			*ax25_ptr;	/* AX.25 specific data */
+ 	struct wireless_dev	*ieee80211_ptr;	/* IEEE 802.11 specific data,
+ 						   assign before registering */
++	void			*phy_ptr; /* PHY device specific data */
+ 
+ /*
+  * Cache line mostly used on receive path (including eth_type_trans())
diff --git a/target/linux/generic/patches-2.6.35/650-swconfig.patch b/target/linux/generic/patches-2.6.35/650-swconfig.patch
new file mode 100644
index 0000000000..6825037ce9
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/650-swconfig.patch
@@ -0,0 +1,25 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -13,6 +13,12 @@ menuconfig PHYLIB
+ 
+ if PHYLIB
+ 
++config SWCONFIG
++	tristate "Switch configuration API"
++	---help---
++	  Switch configuration API using netlink. This allows
++	  you to configure the VLAN features of certain switches.
++
+ comment "MII PHY device drivers"
+ 
+ config MARVELL_PHY
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -3,6 +3,7 @@
+ libphy-objs			:= phy.o phy_device.o mdio_bus.o
+ 
+ obj-$(CONFIG_PHYLIB)		+= libphy.o
++obj-$(CONFIG_SWCONFIG)		+= swconfig.o
+ obj-$(CONFIG_MARVELL_PHY)	+= marvell.o
+ obj-$(CONFIG_DAVICOM_PHY)	+= davicom.o
+ obj-$(CONFIG_CICADA_PHY)	+= cicada.o
diff --git a/target/linux/generic/patches-2.6.35/651-swconfig-2.6.32-fix.patch b/target/linux/generic/patches-2.6.35/651-swconfig-2.6.32-fix.patch
new file mode 100644
index 0000000000..b86e259c8d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/651-swconfig-2.6.32-fix.patch
@@ -0,0 +1,29 @@
+--- a/drivers/net/phy/swconfig.c
++++ b/drivers/net/phy/swconfig.c
+@@ -335,7 +335,7 @@ swconfig_send_multipart(struct swconfig_
+ 			if (cb->close(cb, arg) < 0)
+ 				goto error;
+ 		}
+-		err = genlmsg_unicast(cb->msg, info->snd_pid);
++		err = genlmsg_reply(cb->msg, info);
+ 		cb->msg = NULL;
+ 		if (err < 0)
+ 			goto error;
+@@ -419,7 +419,7 @@ swconfig_list_attrs(struct sk_buff *skb,
+ 	if (!cb.msg)
+ 		return 0;
+ 
+-	return genlmsg_unicast(cb.msg, info->snd_pid);
++	return genlmsg_reply(cb.msg, info);
+ 
+ error:
+ 	if (cb.msg)
+@@ -732,7 +732,7 @@ swconfig_get_attr(struct sk_buff *skb, s
+ 		goto nla_put_failure;
+ 
+ 	swconfig_put_dev(dev);
+-	return genlmsg_unicast(msg, info->snd_pid);
++	return genlmsg_reply(msg, info);
+ 
+ nla_put_failure:
+ 	if (msg)
diff --git a/target/linux/generic/patches-2.6.35/660-phy_mvswitch.patch b/target/linux/generic/patches-2.6.35/660-phy_mvswitch.patch
new file mode 100644
index 0000000000..f5ff558b0f
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/660-phy_mvswitch.patch
@@ -0,0 +1,22 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -104,6 +104,9 @@ config ADM6996_PHY
+ 	---help---
+ 	  Currently supports the ADM6996F switch
+ 
++config MVSWITCH_PHY
++	tristate "Driver for Marvell 88E6060 switches"
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -15,6 +15,7 @@ obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
+ obj-$(CONFIG_BCM63XX_PHY)	+= bcm63xx.o
+ obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
+ obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
++obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
diff --git a/target/linux/generic/patches-2.6.35/670-phy_ip175c.patch b/target/linux/generic/patches-2.6.35/670-phy_ip175c.patch
new file mode 100644
index 0000000000..22a56ed4dc
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/670-phy_ip175c.patch
@@ -0,0 +1,23 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -107,6 +107,10 @@ config ADM6996_PHY
+ config MVSWITCH_PHY
+ 	tristate "Driver for Marvell 88E6060 switches"
+ 
++config IP17XX_PHY
++	tristate "Driver for IC+ IP17xx switches"
++	select SWCONFIG
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -16,6 +16,7 @@ obj-$(CONFIG_BCM63XX_PHY)	+= bcm63xx.o
+ obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
+ obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
+ obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
++obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
diff --git a/target/linux/generic/patches-2.6.35/680-phy_ar8216.patch b/target/linux/generic/patches-2.6.35/680-phy_ar8216.patch
new file mode 100644
index 0000000000..2bc9d6754d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/680-phy_ar8216.patch
@@ -0,0 +1,23 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -111,6 +111,10 @@ config IP175C_PHY
+ 	tristate "Driver for IC+ IP175C/IP178C switches"
+ 	select SWCONFIG
+ 
++config AR8216_PHY
++	tristate "Driver for Atheros AR8216 switches"
++	select SWCONFIG
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -18,6 +18,7 @@ obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
+ obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
+ obj-$(CONFIG_IP175C_PHY)	+= ip175c.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
++obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
diff --git a/target/linux/generic/patches-2.6.35/690-phy_rtl8306.patch b/target/linux/generic/patches-2.6.35/690-phy_rtl8306.patch
new file mode 100644
index 0000000000..9e86748a86
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/690-phy_rtl8306.patch
@@ -0,0 +1,23 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -115,6 +115,10 @@ config AR8216_PHY
+ 	tristate "Driver for Atheros AR8216 switches"
+ 	select SWCONFIG
+ 
++config RTL8306_PHY
++	tristate "Driver for Realtek RTL8306S switches"
++	select SWCONFIG
++
+ config FIXED_PHY
+ 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ 	depends on PHYLIB=y
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -19,6 +19,7 @@ obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
+ obj-$(CONFIG_IP175C_PHY)	+= ip175c.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
++obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
diff --git a/target/linux/generic/patches-2.6.35/691-phy_rtl8366.patch b/target/linux/generic/patches-2.6.35/691-phy_rtl8366.patch
new file mode 100644
index 0000000000..ec07636308
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/691-phy_rtl8366.patch
@@ -0,0 +1,44 @@
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -157,4 +157,29 @@ config MDIO_OCTEON
+ 
+ 	  If in doubt, say Y.
+ 
++config RTL8366_SMI
++	tristate "Driver for the RTL8366 SMI interface"
++	depends on GENERIC_GPIO
++	---help---
++	  This module implements the SMI interface protocol which is used
++	  by some RTL8366 ethernet switch devices via the generic GPIO API.
++
++if RTL8366_SMI
++
++config RTL8366S_PHY
++	tristate "Driver for the Realtek RTL8366S switch"
++	select SWCONFIG
++
++config RTL8366RB_PHY
++	tristate "Driver for the Realtek RTL8366RB switch"
++	select SWCONFIG
++
++config RTL8366S_PHY_DEBUG_FS
++	bool "RTL8366 switch driver DEBUG_FS support"
++	depends on RTL8366S_PHY || RTL8366RB_PHY
++	depends on DEBUG_FS
++	default n
++
++endif # RTL8366_SMI
++
+ endif # PHYLIB
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -20,6 +20,9 @@ obj-$(CONFIG_IP175C_PHY)	+= ip175c.o
+ obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
+ obj-$(CONFIG_AR8216_PHY)	+= ar8216.o
+ obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
++obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o
++obj-$(CONFIG_RTL8366S_PHY)	+= rtl8366s.o
++obj-$(CONFIG_RTL8366RB_PHY)	+= rtl8366rb.o
+ obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
+ obj-$(CONFIG_FIXED_PHY)		+= fixed.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
diff --git a/target/linux/generic/patches-2.6.35/700-rtc7301.patch b/target/linux/generic/patches-2.6.35/700-rtc7301.patch
new file mode 100644
index 0000000000..f4325d298a
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/700-rtc7301.patch
@@ -0,0 +1,250 @@
+--- a/drivers/rtc/Kconfig
++++ b/drivers/rtc/Kconfig
+@@ -618,6 +618,15 @@ config RTC_DRV_NUC900
+ 	  If you say yes here you get support for the RTC subsystem of the
+ 	  NUC910/NUC920 used in embedded systems.
+ 
++config RTC_DRV_RTC7301
++	tristate "Epson RTC-7301 SF/DG"
++	help
++	  If you say Y here you will get support for the
++	  Epson RTC-7301 SF/DG RTC chips.
++
++	  This driver can also be built as a module. If so, the module
++	  will be called rtc-7301.
++
+ comment "on-CPU RTC drivers"
+ 
+ config RTC_DRV_OMAP
+--- a/drivers/rtc/Makefile
++++ b/drivers/rtc/Makefile
+@@ -74,6 +74,7 @@ obj-$(CONFIG_RTC_DRV_RP5C01)	+= rtc-rp5c
+ obj-$(CONFIG_RTC_DRV_RS5C313)	+= rtc-rs5c313.o
+ obj-$(CONFIG_RTC_DRV_RS5C348)	+= rtc-rs5c348.o
+ obj-$(CONFIG_RTC_DRV_RS5C372)	+= rtc-rs5c372.o
++obj-$(CONFIG_RTC_DRV_RTC7301)	+= rtc-rtc7301.o
+ obj-$(CONFIG_RTC_DRV_RX8025)	+= rtc-rx8025.o
+ obj-$(CONFIG_RTC_DRV_RX8581)	+= rtc-rx8581.o
+ obj-$(CONFIG_RTC_DRV_S35390A)	+= rtc-s35390a.o
+--- /dev/null
++++ b/drivers/rtc/rtc-rtc7301.c
+@@ -0,0 +1,219 @@
++/*
++ * Driver for Epson RTC-7301SF/DG
++ *
++ * Copyright (C) 2009 Jose Vasconcellos
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/rtc.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/delay.h>
++#include <linux/bcd.h>
++
++#define RTC_NAME "rtc7301"
++#define RTC_VERSION "0.1"
++
++/* Epson RTC-7301 register addresses */
++#define RTC7301_SEC		0x00
++#define RTC7301_SEC10		0x01
++#define RTC7301_MIN		0x02
++#define RTC7301_MIN10		0x03
++#define RTC7301_HOUR		0x04
++#define RTC7301_HOUR10		0x05
++#define RTC7301_WEEKDAY		0x06
++#define RTC7301_DAY		0x07
++#define RTC7301_DAY10		0x08
++#define RTC7301_MON		0x09
++#define RTC7301_MON10		0x0A
++#define RTC7301_YEAR		0x0B
++#define RTC7301_YEAR10		0x0C
++#define RTC7301_YEAR100		0x0D
++#define RTC7301_YEAR1000	0x0E
++#define RTC7301_CTRLREG		0x0F
++
++static uint8_t __iomem *rtc7301_base;
++
++#define read_reg(offset) (readb(rtc7301_base + offset) & 0xf)
++#define write_reg(offset, data) writeb(data, rtc7301_base + (offset))
++
++#define rtc7301_isbusy() (read_reg(RTC7301_CTRLREG) & 1)
++
++static void rtc7301_init_settings(void)
++{
++	int i;
++
++	write_reg(RTC7301_CTRLREG, 2);
++	write_reg(RTC7301_YEAR1000, 2);
++	udelay(122);
++
++	/* bank 1 */
++	write_reg(RTC7301_CTRLREG, 6);
++	for (i=0; i<15; i++)
++		write_reg(i, 0);
++
++	/* bank 2 */
++	write_reg(RTC7301_CTRLREG, 14);
++	for (i=0; i<15; i++)
++		write_reg(i, 0);
++	write_reg(RTC7301_CTRLREG, 0);
++}
++
++static int rtc7301_get_datetime(struct device *dev, struct rtc_time *dt)
++{
++	int cnt;
++	uint8_t buf[16];
++
++	cnt = 0;
++	while (rtc7301_isbusy()) {
++		udelay(244);
++		if (cnt++ > 100) {
++			dev_err(dev, "%s: timeout error %x\n", __func__, rtc7301_base[RTC7301_CTRLREG]);
++			return -EIO;
++		}
++	}
++
++	for (cnt=0; cnt<16; cnt++)
++		buf[cnt] = read_reg(cnt);
++
++	if (buf[RTC7301_SEC10] & 8) {
++		dev_err(dev, "%s: RTC not set\n", __func__);
++		return -EINVAL;
++	}
++
++	memset(dt, 0, sizeof(*dt));
++
++	dt->tm_sec =  buf[RTC7301_SEC] + buf[RTC7301_SEC10]*10;
++	dt->tm_min =  buf[RTC7301_MIN] + buf[RTC7301_MIN10]*10;
++	dt->tm_hour = buf[RTC7301_HOUR] + buf[RTC7301_HOUR10]*10;
++
++	dt->tm_mday = buf[RTC7301_DAY] + buf[RTC7301_DAY10]*10;
++	dt->tm_mon =  buf[RTC7301_MON] + buf[RTC7301_MON10]*10 - 1;
++	dt->tm_year = buf[RTC7301_YEAR] + buf[RTC7301_YEAR10]*10 +
++		      buf[RTC7301_YEAR100]*100 +
++		      ((buf[RTC7301_YEAR1000] & 3)*1000) - 1900;
++
++	/* the rtc device may contain illegal values on power up
++	 * according to the data sheet. make sure they are valid.
++	 */
++
++	return rtc_valid_tm(dt);
++}
++
++static int rtc7301_set_datetime(struct device *dev, struct rtc_time *dt)
++{
++	int data;
++
++	data = dt->tm_year + 1900;
++	if (data >= 2100 || data < 1900)
++		return -EINVAL;
++
++	write_reg(RTC7301_CTRLREG, 2);
++       	udelay(122);
++
++	data = bin2bcd(dt->tm_sec);
++	write_reg(RTC7301_SEC, data);
++	write_reg(RTC7301_SEC10, (data >> 4));
++
++	data = bin2bcd(dt->tm_min);
++	write_reg(RTC7301_MIN, data );
++	write_reg(RTC7301_MIN10, (data >> 4));
++
++	data = bin2bcd(dt->tm_hour);
++	write_reg(RTC7301_HOUR, data);
++	write_reg(RTC7301_HOUR10, (data >> 4));
++
++	data = bin2bcd(dt->tm_mday);
++	write_reg(RTC7301_DAY, data);
++	write_reg(RTC7301_DAY10, (data>> 4));
++
++	data = bin2bcd(dt->tm_mon + 1);
++	write_reg(RTC7301_MON, data);
++	write_reg(RTC7301_MON10, (data >> 4));
++
++	data = bin2bcd(dt->tm_year % 100);
++	write_reg(RTC7301_YEAR, data);
++	write_reg(RTC7301_YEAR10, (data >> 4));
++	data = bin2bcd((1900 + dt->tm_year) / 100);
++	write_reg(RTC7301_YEAR100, data);
++
++	data = bin2bcd(dt->tm_wday);
++	write_reg(RTC7301_WEEKDAY, data);
++
++	write_reg(RTC7301_CTRLREG, 0);
++
++	return 0;
++}
++
++static const struct rtc_class_ops rtc7301_rtc_ops = {
++	.read_time	= rtc7301_get_datetime,
++	.set_time	= rtc7301_set_datetime,
++};
++
++static int __devinit rtc7301_probe(struct platform_device *pdev)
++{
++	struct rtc_device *rtc;
++	struct resource *res;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res)
++		return -ENOENT;
++
++	rtc7301_base = ioremap_nocache(res->start, 0x1000 /*res->end - res->start + 1*/);
++	if (!rtc7301_base)
++		return -EINVAL;
++
++	rtc = rtc_device_register(RTC_NAME, &pdev->dev,
++				&rtc7301_rtc_ops, THIS_MODULE);
++	if (IS_ERR(rtc)) {
++		iounmap(rtc7301_base);
++		return PTR_ERR(rtc);
++	}
++
++	platform_set_drvdata(pdev, rtc);
++
++	rtc7301_init_settings();
++	return 0;
++}
++
++static int __devexit rtc7301_remove(struct platform_device *pdev)
++{
++	struct rtc_device *rtc = platform_get_drvdata(pdev);
++
++	if (rtc)
++		rtc_device_unregister(rtc);
++	if (rtc7301_base)
++		iounmap(rtc7301_base);
++	return 0;
++}
++
++static struct platform_driver rtc7301_driver = {
++	.driver = {
++		.name	= RTC_NAME,
++		.owner	= THIS_MODULE,
++	},
++	.probe	= rtc7301_probe,
++	.remove = __devexit_p(rtc7301_remove),
++};
++
++static __init int rtc7301_init(void)
++{
++	return platform_driver_register(&rtc7301_driver);
++}
++module_init(rtc7301_init);
++
++static __exit void rtc7301_exit(void)
++{
++	platform_driver_unregister(&rtc7301_driver);
++}
++module_exit(rtc7301_exit);
++
++MODULE_DESCRIPTION("Epson 7301 RTC driver");
++MODULE_AUTHOR("Jose Vasconcellos <jvasco@verizon.net>");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:" RTC_NAME);
++MODULE_VERSION(RTC_VERSION);
diff --git a/target/linux/generic/patches-2.6.35/750-glamo-headers.patch b/target/linux/generic/patches-2.6.35/750-glamo-headers.patch
new file mode 100644
index 0000000000..c2e3880641
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/750-glamo-headers.patch
@@ -0,0 +1,21 @@
+--- a/include/linux/fb.h
++++ b/include/linux/fb.h
+@@ -124,6 +124,7 @@ struct dentry;
+ #define FB_ACCEL_TRIDENT_BLADE3D 52	/* Trident Blade3D		*/
+ #define FB_ACCEL_TRIDENT_BLADEXP 53	/* Trident BladeXP		*/
+ #define FB_ACCEL_CIRRUS_ALPINE   53	/* Cirrus Logic 543x/544x/5480	*/
++#define FB_ACCEL_GLAMO		50	/* SMedia Glamo                 */
+ #define FB_ACCEL_NEOMAGIC_NM2070 90	/* NeoMagic NM2070              */
+ #define FB_ACCEL_NEOMAGIC_NM2090 91	/* NeoMagic NM2090              */
+ #define FB_ACCEL_NEOMAGIC_NM2093 92	/* NeoMagic NM2093              */
+--- a/include/linux/Kbuild
++++ b/include/linux/Kbuild
+@@ -77,6 +77,8 @@ header-y += genetlink.h
+ header-y += gen_stats.h
+ header-y += gfs2_ondisk.h
+ header-y += gigaset_dev.h
++header-y += glamofb.h
++header-y += glamo-engine.h
+ header-y += hysdn_if.h
+ header-y += i2o-dev.h
+ header-y += i8k.h
diff --git a/target/linux/generic/patches-2.6.35/801-usb_serial_endpoint_size.patch b/target/linux/generic/patches-2.6.35/801-usb_serial_endpoint_size.patch
new file mode 100644
index 0000000000..cfbcbe88fb
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/801-usb_serial_endpoint_size.patch
@@ -0,0 +1,25 @@
+--- a/drivers/usb/serial/usb-serial.c
++++ b/drivers/usb/serial/usb-serial.c
+@@ -61,6 +61,7 @@ static struct usb_driver usb_serial_driv
+    drivers depend on it.
+ */
+ 
++static ushort maxSize = 0;
+ static int debug;
+ /* initially all NULL */
+ static struct usb_serial *serial_table[SERIAL_TTY_MINORS];
+@@ -912,7 +913,7 @@ int usb_serial_probe(struct usb_interfac
+ 		}
+ 		buffer_size = serial->type->bulk_in_size;
+ 		if (!buffer_size)
+-			buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
++			buffer_size = (endpoint->wMaxPacketSize > maxSize) ? endpoint->wMaxPacketSize : maxSize;
+ 		port->bulk_in_size = buffer_size;
+ 		port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
+ 		port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
+@@ -1382,3 +1383,5 @@ MODULE_LICENSE("GPL");
+ 
+ module_param(debug, bool, S_IRUGO | S_IWUSR);
+ MODULE_PARM_DESC(debug, "Debug enabled or not");
++module_param(maxSize, ushort,0);
++MODULE_PARM_DESC(maxSize,"User specified USB endpoint size");
diff --git a/target/linux/generic/patches-2.6.35/840-unable_to_open_console.patch b/target/linux/generic/patches-2.6.35/840-unable_to_open_console.patch
new file mode 100644
index 0000000000..6a634b7b39
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/840-unable_to_open_console.patch
@@ -0,0 +1,11 @@
+--- a/init/main.c
++++ b/init/main.c
+@@ -887,7 +887,7 @@ static int __init kernel_init(void * unu
+ 
+ 	/* Open the /dev/console on the rootfs, this should never fail */
+ 	if (sys_open((const char __user *) "/dev/console", O_RDWR, 0) < 0)
+-		printk(KERN_WARNING "Warning: unable to open an initial console.\n");
++		printk(KERN_WARNING "Please be patient, while OpenWrt loads ...\n");
+ 
+ 	(void) sys_dup(0);
+ 	(void) sys_dup(0);
diff --git a/target/linux/generic/patches-2.6.35/902-darwin_scripts_include.patch b/target/linux/generic/patches-2.6.35/902-darwin_scripts_include.patch
new file mode 100644
index 0000000000..39b6abe8d0
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/902-darwin_scripts_include.patch
@@ -0,0 +1,102 @@
+--- a/scripts/genksyms/parse.c_shipped
++++ b/scripts/genksyms/parse.c_shipped
+@@ -160,7 +160,9 @@
+ 
+ 
+ #include <assert.h>
++#ifndef __APPLE__
+ #include <malloc.h>
++#endif
+ #include "genksyms.h"
+ 
+ static int is_typedef;
+--- a/scripts/genksyms/parse.y
++++ b/scripts/genksyms/parse.y
+@@ -24,7 +24,9 @@
+ %{
+ 
+ #include <assert.h>
++#ifndef __APPLE__
+ #include <malloc.h>
++#endif
+ #include "genksyms.h"
+ 
+ static int is_typedef;
+--- a/scripts/kallsyms.c
++++ b/scripts/kallsyms.c
+@@ -22,6 +22,35 @@
+ #include <stdlib.h>
+ #include <string.h>
+ #include <ctype.h>
++#ifdef __APPLE__
++/* Darwin has no memmem implementation, this one is ripped of the uClibc-0.9.28 source */
++void *memmem (const void *haystack, size_t haystack_len,
++                          const void *needle,  size_t needle_len)
++{
++  const char *begin;
++  const char *const last_possible
++    = (const char *) haystack + haystack_len - needle_len;
++
++  if (needle_len == 0)
++    /* The first occurrence of the empty string is deemed to occur at
++       the beginning of the string.  */
++    return (void *) haystack;
++
++  /* Sanity check, otherwise the loop might search through the whole
++     memory.  */
++  if (__builtin_expect (haystack_len < needle_len, 0))
++    return NULL;
++
++  for (begin = (const char *) haystack; begin <= last_possible; ++begin)
++    if (begin[0] == ((const char *) needle)[0] &&
++        !memcmp ((const void *) &begin[1],
++                 (const void *) ((const char *) needle + 1),
++                 needle_len - 1))
++      return (void *) begin;
++
++  return NULL;
++}
++#endif
+ 
+ #ifndef ARRAY_SIZE
+ #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof(arr[0]))
+--- a/scripts/kconfig/Makefile
++++ b/scripts/kconfig/Makefile
+@@ -140,6 +140,9 @@ check-lxdialog  := $(srctree)/$(src)/lxd
+ # we really need to do so. (Do not call gcc as part of make mrproper)
+ HOST_EXTRACFLAGS = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags)
+ HOST_LOADLIBES   = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
++ifeq ($(shell uname -s),Darwin)
++HOST_LOADLIBES  += -lncurses
++endif
+ 
+ HOST_EXTRACFLAGS += -DLOCALE
+ 
+--- a/scripts/mod/mk_elfconfig.c
++++ b/scripts/mod/mk_elfconfig.c
+@@ -1,7 +1,11 @@
+ #include <stdio.h>
+ #include <stdlib.h>
+ #include <string.h>
++#ifndef __APPLE__
+ #include <elf.h>
++#else
++#include "../../../../../tools/sstrip/include/elf.h"
++#endif
+ 
+ int
+ main(int argc, char **argv)
+--- a/scripts/mod/modpost.h
++++ b/scripts/mod/modpost.h
+@@ -7,7 +7,11 @@
+ #include <sys/mman.h>
+ #include <fcntl.h>
+ #include <unistd.h>
++#if !(defined(__APPLE__) || defined(__CYGWIN__))
+ #include <elf.h>
++#else
++#include "../../../../../tools/sstrip/include/elf.h"
++#endif
+ 
+ #include "elfconfig.h"
+ 
diff --git a/target/linux/generic/patches-2.6.35/903-hostap_txpower.patch b/target/linux/generic/patches-2.6.35/903-hostap_txpower.patch
new file mode 100644
index 0000000000..8aa43c5242
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/903-hostap_txpower.patch
@@ -0,0 +1,154 @@
+--- a/drivers/net/wireless/hostap/hostap_ap.c
++++ b/drivers/net/wireless/hostap/hostap_ap.c
+@@ -2336,13 +2336,13 @@ int prism2_ap_get_sta_qual(local_info_t
+ 		addr[count].sa_family = ARPHRD_ETHER;
+ 		memcpy(addr[count].sa_data, sta->addr, ETH_ALEN);
+ 		if (sta->last_rx_silence == 0)
+-			qual[count].qual = sta->last_rx_signal < 27 ?
+-				0 : (sta->last_rx_signal - 27) * 92 / 127;
++                        qual[count].qual = (sta->last_rx_signal - 156) == 0 ?
++                                0 : (sta->last_rx_signal - 156) * 92 / 64;
+ 		else
+-			qual[count].qual = sta->last_rx_signal -
+-				sta->last_rx_silence - 35;
+-		qual[count].level = HFA384X_LEVEL_TO_dBm(sta->last_rx_signal);
+-		qual[count].noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence);
++                        qual[count].qual = (sta->last_rx_signal -
++                                sta->last_rx_silence) * 92 / 64;
++                qual[count].level = sta->last_rx_signal;
++                qual[count].noise = sta->last_rx_silence;
+ 		qual[count].updated = sta->last_rx_updated;
+ 
+ 		sta->last_rx_updated = IW_QUAL_DBM;
+@@ -2408,13 +2408,13 @@ int prism2_ap_translate_scan(struct net_
+ 		memset(&iwe, 0, sizeof(iwe));
+ 		iwe.cmd = IWEVQUAL;
+ 		if (sta->last_rx_silence == 0)
+-			iwe.u.qual.qual = sta->last_rx_signal < 27 ?
+-				0 : (sta->last_rx_signal - 27) * 92 / 127;
++	                iwe.u.qual.qual = (sta->last_rx_signal -156) == 0 ?
++	                        0 : (sta->last_rx_signal - 156) * 92 / 64;
+ 		else
+-			iwe.u.qual.qual = sta->last_rx_signal -
+-				sta->last_rx_silence - 35;
+-		iwe.u.qual.level = HFA384X_LEVEL_TO_dBm(sta->last_rx_signal);
+-		iwe.u.qual.noise = HFA384X_LEVEL_TO_dBm(sta->last_rx_silence);
++                        iwe.u.qual.qual = (sta->last_rx_signal -
++                                sta->last_rx_silence) * 92 / 64;
++                iwe.u.qual.level = sta->last_rx_signal;
++                iwe.u.qual.noise = sta->last_rx_silence;
+ 		iwe.u.qual.updated = sta->last_rx_updated;
+ 		iwe.len = IW_EV_QUAL_LEN;
+ 		current_ev = iwe_stream_add_event(info, current_ev, end_buf,
+--- a/drivers/net/wireless/hostap/hostap_config.h
++++ b/drivers/net/wireless/hostap/hostap_config.h
+@@ -45,4 +45,9 @@
+  */
+ /* #define PRISM2_NO_STATION_MODES */
+ 
++/* Enable TX power Setting functions
++ * (min att = -128 , max att =  127)
++ */
++#define RAW_TXPOWER_SETTING
++
+ #endif /* HOSTAP_CONFIG_H */
+--- a/drivers/net/wireless/hostap/hostap.h
++++ b/drivers/net/wireless/hostap/hostap.h
+@@ -90,6 +90,7 @@ extern const struct iw_handler_def hosta
+ extern const struct ethtool_ops prism2_ethtool_ops;
+ 
+ int hostap_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
++int hostap_restore_power(struct net_device *dev);
+ 
+ 
+ #endif /* HOSTAP_H */
+--- a/drivers/net/wireless/hostap/hostap_hw.c
++++ b/drivers/net/wireless/hostap/hostap_hw.c
+@@ -932,6 +932,7 @@ static int hfa384x_set_rid(struct net_de
+ 			prism2_hw_reset(dev);
+ 	}
+ 
++	hostap_restore_power(dev);
+ 	return res;
+ }
+ 
+--- a/drivers/net/wireless/hostap/hostap_info.c
++++ b/drivers/net/wireless/hostap/hostap_info.c
+@@ -433,6 +433,11 @@ static void handle_info_queue_linkstatus
+ 	}
+ 
+ 	/* Get BSSID if we have a valid AP address */
++
++	if ( val == HFA384X_LINKSTATUS_CONNECTED ||
++	     val == HFA384X_LINKSTATUS_DISCONNECTED )
++			hostap_restore_power(local->dev);
++
+ 	if (connected) {
+ 		netif_carrier_on(local->dev);
+ 		netif_carrier_on(local->ddev);
+--- a/drivers/net/wireless/hostap/hostap_ioctl.c
++++ b/drivers/net/wireless/hostap/hostap_ioctl.c
+@@ -1477,23 +1477,20 @@ static int prism2_txpower_hfa386x_to_dBm
+ 		val = 255;
+ 
+ 	tmp = val;
+-	tmp >>= 2;
+ 
+-	return -12 - tmp;
++	return tmp;
+ }
+ 
+ static u16 prism2_txpower_dBm_to_hfa386x(int val)
+ {
+ 	signed char tmp;
+ 
+-	if (val > 20)
+-		return 128;
+-	else if (val < -43)
++	if (val > 127)
+ 		return 127;
++	else if (val < -128)
++		return 128;
+ 
+ 	tmp = val;
+-	tmp = -12 - tmp;
+-	tmp <<= 2;
+ 
+ 	return (unsigned char) tmp;
+ }
+@@ -4057,3 +4054,35 @@ int hostap_ioctl(struct net_device *dev,
+ 
+ 	return ret;
+ }
++
++/* BUG FIX: Restore power setting value when lost due to F/W bug */
++
++int hostap_restore_power(struct net_device *dev)
++{
++        struct hostap_interface *iface = netdev_priv(dev);
++       local_info_t *local = iface->local;
++
++       u16 val;
++       int ret = 0;
++
++       if (local->txpower_type == PRISM2_TXPOWER_OFF) {
++                       val = 0xff; /* use all standby and sleep modes */
++                       ret = local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF,
++                                              HFA386X_CR_A_D_TEST_MODES2,
++                                              &val, NULL);
++       }
++
++#ifdef RAW_TXPOWER_SETTING
++       if (local->txpower_type == PRISM2_TXPOWER_FIXED) {
++               val = HFA384X_TEST_CFG_BIT_ALC;
++               local->func->cmd(dev, HFA384X_CMDCODE_TEST |
++                                (HFA384X_TEST_CFG_BITS << 8), 0, &val, NULL);
++               val = prism2_txpower_dBm_to_hfa386x(local->txpower);
++               ret = (local->func->cmd(dev, HFA384X_CMDCODE_WRITEMIF,
++                            HFA386X_CR_MANUAL_TX_POWER, &val, NULL));
++       }
++#endif /* RAW_TXPOWER_SETTING */
++       return (ret ? -EOPNOTSUPP : 0);
++}
++
++EXPORT_SYMBOL(hostap_restore_power);
diff --git a/target/linux/generic/patches-2.6.35/903-stddef_include.patch b/target/linux/generic/patches-2.6.35/903-stddef_include.patch
new file mode 100644
index 0000000000..7fe248d8d3
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/903-stddef_include.patch
@@ -0,0 +1,17 @@
+--- a/include/linux/stddef.h
++++ b/include/linux/stddef.h
+@@ -16,6 +16,7 @@ enum {
+ 	false	= 0,
+ 	true	= 1
+ };
++#endif /* __KERNEL__ */
+ 
+ #undef offsetof
+ #ifdef __compiler_offsetof
+@@ -23,6 +24,5 @@ enum {
+ #else
+ #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
+ #endif
+-#endif /* __KERNEL__ */
+ 
+ #endif
diff --git a/target/linux/generic/patches-2.6.35/905-i386_build.patch b/target/linux/generic/patches-2.6.35/905-i386_build.patch
new file mode 100644
index 0000000000..c701fdaa95
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/905-i386_build.patch
@@ -0,0 +1,10 @@
+--- a/arch/x86/boot/tools/build.c
++++ b/arch/x86/boot/tools/build.c
+@@ -29,7 +29,6 @@
+ #include <stdarg.h>
+ #include <sys/types.h>
+ #include <sys/stat.h>
+-#include <sys/sysmacros.h>
+ #include <unistd.h>
+ #include <fcntl.h>
+ #include <sys/mman.h>
diff --git a/target/linux/generic/patches-2.6.35/920-01-hotpluggable-spi-gpio.patch b/target/linux/generic/patches-2.6.35/920-01-hotpluggable-spi-gpio.patch
new file mode 100644
index 0000000000..b10bc9a65e
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/920-01-hotpluggable-spi-gpio.patch
@@ -0,0 +1,60 @@
+Fix spi-gpio for hotplug.
+
+--mb
+
+
+
+--- a/drivers/spi/spi_gpio.c
++++ b/drivers/spi/spi_gpio.c
+@@ -218,7 +218,7 @@ static void spi_gpio_cleanup(struct spi_
+ 	spi_bitbang_cleanup(spi);
+ }
+ 
+-static int __init spi_gpio_alloc(unsigned pin, const char *label, bool is_in)
++static int __devinit spi_gpio_alloc(unsigned pin, const char *label, bool is_in)
+ {
+ 	int value;
+ 
+@@ -232,7 +232,7 @@ static int __init spi_gpio_alloc(unsigne
+ 	return value;
+ }
+ 
+-static int __init
++static int __devinit
+ spi_gpio_request(struct spi_gpio_platform_data *pdata, const char *label)
+ {
+ 	int value;
+@@ -261,7 +261,7 @@ done:
+ 	return value;
+ }
+ 
+-static int __init spi_gpio_probe(struct platform_device *pdev)
++static int __devinit spi_gpio_probe(struct platform_device *pdev)
+ {
+ 	int				status;
+ 	struct spi_master		*master;
+@@ -317,7 +317,7 @@ gpio_free:
+ 	return status;
+ }
+ 
+-static int __exit spi_gpio_remove(struct platform_device *pdev)
++static int __devexit spi_gpio_remove(struct platform_device *pdev)
+ {
+ 	struct spi_gpio			*spi_gpio;
+ 	struct spi_gpio_platform_data	*pdata;
+@@ -344,12 +344,13 @@ MODULE_ALIAS("platform:" DRIVER_NAME);
+ static struct platform_driver spi_gpio_driver = {
+ 	.driver.name	= DRIVER_NAME,
+ 	.driver.owner	= THIS_MODULE,
+-	.remove		= __exit_p(spi_gpio_remove),
++	.probe		= spi_gpio_probe,
++	.remove		= __devexit_p(spi_gpio_remove),
+ };
+ 
+ static int __init spi_gpio_init(void)
+ {
+-	return platform_driver_probe(&spi_gpio_driver, spi_gpio_probe);
++	return platform_driver_register(&spi_gpio_driver);
+ }
+ module_init(spi_gpio_init);
+ 
diff --git a/target/linux/generic/patches-2.6.35/920-04-spi-gpio-implement-spi-delay.patch b/target/linux/generic/patches-2.6.35/920-04-spi-gpio-implement-spi-delay.patch
new file mode 100644
index 0000000000..19032881b8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/920-04-spi-gpio-implement-spi-delay.patch
@@ -0,0 +1,58 @@
+Implement the SPI-GPIO delay function for busses that need speed limitation.
+
+--mb
+
+
+
+--- a/drivers/spi/spi_gpio.c
++++ b/drivers/spi/spi_gpio.c
+@@ -21,6 +21,7 @@
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
+ #include <linux/gpio.h>
++#include <linux/delay.h>
+ 
+ #include <linux/spi/spi.h>
+ #include <linux/spi/spi_bitbang.h>
+@@ -69,6 +70,7 @@ struct spi_gpio {
+  *		#define	SPI_MOSI_GPIO	120
+  *		#define	SPI_SCK_GPIO	121
+  *		#define	SPI_N_CHIPSEL	4
++ *		#undef NEED_SPIDELAY
+  *		#include "spi_gpio.c"
+  */
+ 
+@@ -76,6 +78,7 @@ struct spi_gpio {
+ #define DRIVER_NAME	"spi_gpio"
+ 
+ #define GENERIC_BITBANG	/* vs tight inlines */
++#define NEED_SPIDELAY	1
+ 
+ /* all functions referencing these symbols must define pdata */
+ #define SPI_MISO_GPIO	((pdata)->miso)
+@@ -120,12 +123,20 @@ static inline int getmiso(const struct s
+ #undef pdata
+ 
+ /*
+- * NOTE:  this clocks "as fast as we can".  It "should" be a function of the
+- * requested device clock.  Software overhead means we usually have trouble
+- * reaching even one Mbit/sec (except when we can inline bitops), so for now
+- * we'll just assume we never need additional per-bit slowdowns.
++ * NOTE:  to clock "as fast as we can", set spi_device.max_speed_hz
++ * and spi_transfer.speed_hz to 0.
++ * Otherwise this is a function of the requested device clock.
++ * Software overhead means we usually have trouble
++ * reaching even one Mbit/sec (except when we can inline bitops). So on small
++ * embedded devices with fast SPI slaves you usually don't need a delay.
+  */
+-#define spidelay(nsecs)	do {} while (0)
++static inline void spidelay(unsigned nsecs)
++{
++#ifdef NEED_SPIDELAY
++	if (unlikely(nsecs))
++		ndelay(nsecs);
++#endif /* NEED_SPIDELAY */
++}
+ 
+ #define	EXPAND_BITBANG_TXRX
+ #include <linux/spi/spi_bitbang.h>
diff --git a/target/linux/generic/patches-2.6.35/921-gpio_spi_driver.patch b/target/linux/generic/patches-2.6.35/921-gpio_spi_driver.patch
new file mode 100644
index 0000000000..65f17b49eb
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/921-gpio_spi_driver.patch
@@ -0,0 +1,366 @@
+THIS CODE IS DEPRECATED.
+
+Please use the new mainline SPI-GPIO driver, as of 2.6.29.
+
+--mb
+
+
+
+--- /dev/null
++++ b/include/linux/spi/spi_gpio_old.h
+@@ -0,0 +1,73 @@
++/*
++ * spi_gpio interface to platform code
++ *
++ * Copyright (c) 2008 Piotr Skamruk
++ * Copyright (c) 2008 Michael Buesch
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef _LINUX_SPI_SPI_GPIO
++#define _LINUX_SPI_SPI_GPIO
++
++#include <linux/types.h>
++#include <linux/spi/spi.h>
++
++
++/**
++ * struct spi_gpio_platform_data - Data definitions for a SPI-GPIO device.
++ *
++ * This structure holds information about a GPIO-based SPI device.
++ *
++ * @pin_clk: The GPIO pin number of the CLOCK pin.
++ *
++ * @pin_miso: The GPIO pin number of the MISO pin.
++ *
++ * @pin_mosi: The GPIO pin number of the MOSI pin.
++ *
++ * @pin_cs: The GPIO pin number of the CHIPSELECT pin.
++ *
++ * @cs_activelow: If true, the chip is selected when the CS line is low.
++ *
++ * @no_spi_delay: If true, no delay is done in the lowlevel bitbanging.
++ *                Note that doing no delay is not standards compliant,
++ *                but it might be needed to speed up transfers on some
++ *                slow embedded machines.
++ *
++ * @boardinfo_setup: This callback is called after the
++ *                   SPI master device was registered, but before the
++ *                   device is registered.
++ * @boardinfo_setup_data: Data argument passed to boardinfo_setup().
++ */
++struct spi_gpio_platform_data {
++	unsigned int pin_clk;
++	unsigned int pin_miso;
++	unsigned int pin_mosi;
++	unsigned int pin_cs;
++	bool cs_activelow;
++	bool no_spi_delay;
++	int (*boardinfo_setup)(struct spi_board_info *bi,
++			       struct spi_master *master,
++			       void *data);
++	void *boardinfo_setup_data;
++};
++
++/**
++ * SPI_GPIO_PLATDEV_NAME - The platform device name string.
++ *
++ * The name string that has to be used for platform_device_alloc
++ * when allocating a spi-gpio device.
++ */
++#define SPI_GPIO_PLATDEV_NAME	"spi-gpio"
++
++/**
++ * spi_gpio_next_id - Get another platform device ID number.
++ *
++ * This returns the next platform device ID number that has to be used
++ * for platform_device_alloc. The ID is opaque and should not be used for
++ * anything else.
++ */
++int spi_gpio_next_id(void);
++
++#endif /* _LINUX_SPI_SPI_GPIO */
+--- /dev/null
++++ b/drivers/spi/spi_gpio_old.c
+@@ -0,0 +1,251 @@
++/*
++ * Bitbanging SPI bus driver using GPIO API
++ *
++ * Copyright (c) 2008 Piotr Skamruk
++ * Copyright (c) 2008 Michael Buesch
++ *
++ * based on spi_s3c2410_gpio.c
++ *   Copyright (c) 2006 Ben Dooks
++ *   Copyright (c) 2006 Simtec Electronics
++ * and on i2c-gpio.c
++ *   Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/spinlock.h>
++#include <linux/workqueue.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_bitbang.h>
++#include <linux/spi/spi_gpio_old.h>
++#include <linux/gpio.h>
++#include <asm/atomic.h>
++
++
++struct spi_gpio {
++	struct spi_bitbang bitbang;
++	struct spi_gpio_platform_data *info;
++	struct platform_device *pdev;
++	struct spi_board_info bi;
++};
++
++
++static inline struct spi_gpio *spidev_to_sg(struct spi_device *dev)
++{
++	return dev->controller_data;
++}
++
++static inline void setsck(struct spi_device *dev, int val)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++	gpio_set_value(sp->info->pin_clk, val ? 1 : 0);
++}
++
++static inline void setmosi(struct spi_device *dev, int val)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++	gpio_set_value(sp->info->pin_mosi, val ? 1 : 0);
++}
++
++static inline u32 getmiso(struct spi_device *dev)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++	return gpio_get_value(sp->info->pin_miso) ? 1 : 0;
++}
++
++static inline void do_spidelay(struct spi_device *dev, unsigned nsecs)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++
++	if (!sp->info->no_spi_delay)
++		ndelay(nsecs);
++}
++
++#define spidelay(nsecs) do {					\
++	/* Steal the spi_device pointer from our caller.	\
++	 * The bitbang-API should probably get fixed here... */	\
++	do_spidelay(spi, nsecs);				\
++  } while (0)
++
++#define EXPAND_BITBANG_TXRX
++#include <linux/spi/spi_bitbang.h>
++
++static u32 spi_gpio_txrx_mode0(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
++}
++
++static u32 spi_gpio_txrx_mode1(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
++}
++
++static u32 spi_gpio_txrx_mode2(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
++}
++
++static u32 spi_gpio_txrx_mode3(struct spi_device *spi,
++			       unsigned nsecs, u32 word, u8 bits)
++{
++	return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
++}
++
++static void spi_gpio_chipselect(struct spi_device *dev, int on)
++{
++	struct spi_gpio *sp = spidev_to_sg(dev);
++
++	if (sp->info->cs_activelow)
++		on = !on;
++	gpio_set_value(sp->info->pin_cs, on ? 1 : 0);
++}
++
++static int spi_gpio_probe(struct platform_device *pdev)
++{
++	struct spi_master *master;
++	struct spi_gpio_platform_data *pdata;
++	struct spi_gpio *sp;
++	struct spi_device *spidev;
++	int err;
++
++	pdata = pdev->dev.platform_data;
++	if (!pdata)
++		return -ENXIO;
++
++	err = -ENOMEM;
++	master = spi_alloc_master(&pdev->dev, sizeof(struct spi_gpio));
++	if (!master)
++		goto err_alloc_master;
++
++	sp = spi_master_get_devdata(master);
++	platform_set_drvdata(pdev, sp);
++	sp->info = pdata;
++
++	err = gpio_request(pdata->pin_clk, "spi_clock");
++	if (err)
++		goto err_request_clk;
++	err = gpio_request(pdata->pin_mosi, "spi_mosi");
++	if (err)
++		goto err_request_mosi;
++	err = gpio_request(pdata->pin_miso, "spi_miso");
++	if (err)
++		goto err_request_miso;
++	err = gpio_request(pdata->pin_cs, "spi_cs");
++	if (err)
++		goto err_request_cs;
++
++	sp->bitbang.master = spi_master_get(master);
++	sp->bitbang.master->bus_num = -1;
++	sp->bitbang.master->num_chipselect = 1;
++	sp->bitbang.chipselect = spi_gpio_chipselect;
++	sp->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_mode0;
++	sp->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_mode1;
++	sp->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_mode2;
++	sp->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_mode3;
++
++	gpio_direction_output(pdata->pin_clk, 0);
++	gpio_direction_output(pdata->pin_mosi, 0);
++	gpio_direction_output(pdata->pin_cs,
++			      pdata->cs_activelow ? 1 : 0);
++	gpio_direction_input(pdata->pin_miso);
++
++	err = spi_bitbang_start(&sp->bitbang);
++	if (err)
++		goto err_no_bitbang;
++	err = pdata->boardinfo_setup(&sp->bi, master,
++				     pdata->boardinfo_setup_data);
++	if (err)
++		goto err_bi_setup;
++	sp->bi.controller_data = sp;
++	spidev = spi_new_device(master, &sp->bi);
++	if (!spidev)
++		goto err_new_dev;
++
++	return 0;
++
++err_new_dev:
++err_bi_setup:
++	spi_bitbang_stop(&sp->bitbang);
++err_no_bitbang:
++	spi_master_put(sp->bitbang.master);
++	gpio_free(pdata->pin_cs);
++err_request_cs:
++	gpio_free(pdata->pin_miso);
++err_request_miso:
++	gpio_free(pdata->pin_mosi);
++err_request_mosi:
++	gpio_free(pdata->pin_clk);
++err_request_clk:
++	kfree(master);
++
++err_alloc_master:
++	return err;
++}
++
++static int __devexit spi_gpio_remove(struct platform_device *pdev)
++{
++	struct spi_gpio *sp;
++	struct spi_gpio_platform_data *pdata;
++
++	pdata = pdev->dev.platform_data;
++	sp = platform_get_drvdata(pdev);
++
++	gpio_free(pdata->pin_clk);
++	gpio_free(pdata->pin_mosi);
++	gpio_free(pdata->pin_miso);
++	gpio_free(pdata->pin_cs);
++	spi_bitbang_stop(&sp->bitbang);
++	spi_master_put(sp->bitbang.master);
++
++	return 0;
++}
++
++static struct platform_driver spi_gpio_driver = {
++	.driver		= {
++		.name	= SPI_GPIO_PLATDEV_NAME,
++		.owner	= THIS_MODULE,
++	},
++	.probe		= spi_gpio_probe,
++	.remove		= __devexit_p(spi_gpio_remove),
++};
++
++int spi_gpio_next_id(void)
++{
++	static atomic_t counter = ATOMIC_INIT(-1);
++
++	return atomic_inc_return(&counter);
++}
++EXPORT_SYMBOL(spi_gpio_next_id);
++
++static int __init spi_gpio_init(void)
++{
++	int err;
++
++	err = platform_driver_register(&spi_gpio_driver);
++	if (err)
++		printk(KERN_ERR "spi-gpio: register failed: %d\n", err);
++
++	return err;
++}
++module_init(spi_gpio_init);
++
++static void __exit spi_gpio_exit(void)
++{
++	platform_driver_unregister(&spi_gpio_driver);
++}
++module_exit(spi_gpio_exit);
++
++MODULE_AUTHOR("Piot Skamruk <piotr.skamruk at gmail.com>");
++MODULE_AUTHOR("Michael Buesch");
++MODULE_DESCRIPTION("Platform independent GPIO bitbanging SPI driver");
++MODULE_LICENSE("GPL v2");
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -133,6 +133,15 @@ config SPI_GPIO
+ 	  GPIO operations, you should be able to leverage that for better
+ 	  speed with a custom version of this driver; see the source code.
+ 
++config SPI_GPIO_OLD
++	tristate "Old GPIO API based bitbanging SPI controller (DEPRECATED)"
++	depends on SPI_MASTER && GENERIC_GPIO
++	select SPI_BITBANG
++	help
++	  This code is deprecated. Please use the new mainline SPI-GPIO driver.
++
++	  If unsure, say N.
++
+ config SPI_IMX
+ 	tristate "Freescale i.MX SPI controllers"
+ 	depends on ARCH_MXC
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -22,6 +22,7 @@ obj-$(CONFIG_SPI_DESIGNWARE)		+= dw_spi.
+ obj-$(CONFIG_SPI_DW_PCI)		+= dw_spi_pci.o
+ obj-$(CONFIG_SPI_DW_MMIO)		+= dw_spi_mmio.o
+ obj-$(CONFIG_SPI_GPIO)			+= spi_gpio.o
++obj-$(CONFIG_SPI_GPIO_OLD)		+= spi_gpio_old.o
+ obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
+ obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
+ obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
diff --git a/target/linux/generic/patches-2.6.35/922-gpiommc.patch b/target/linux/generic/patches-2.6.35/922-gpiommc.patch
new file mode 100644
index 0000000000..24e5d592e8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/922-gpiommc.patch
@@ -0,0 +1,843 @@
+--- /dev/null
++++ b/drivers/mmc/host/gpiommc.c
+@@ -0,0 +1,608 @@
++/*
++ * Driver an MMC/SD card on a bitbanging GPIO SPI bus.
++ * This module hooks up the mmc_spi and spi_gpio modules and also
++ * provides a configfs interface.
++ *
++ * Copyright 2008 Michael Buesch <mb@bu3sch.de>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include <linux/mmc/gpiommc.h>
++#include <linux/platform_device.h>
++#include <linux/list.h>
++#include <linux/mutex.h>
++#include <linux/spi/spi_gpio_old.h>
++#include <linux/configfs.h>
++#include <linux/gpio.h>
++#include <asm/atomic.h>
++
++
++#define PFX				"gpio-mmc: "
++
++
++struct gpiommc_device {
++	struct platform_device *pdev;
++	struct platform_device *spi_pdev;
++	struct spi_board_info boardinfo;
++};
++
++
++MODULE_DESCRIPTION("GPIO based MMC driver");
++MODULE_AUTHOR("Michael Buesch");
++MODULE_LICENSE("GPL");
++
++
++static int gpiommc_boardinfo_setup(struct spi_board_info *bi,
++				   struct spi_master *master,
++				   void *data)
++{
++	struct gpiommc_device *d = data;
++	struct gpiommc_platform_data *pdata = d->pdev->dev.platform_data;
++
++	/* Bind the SPI master to the MMC-SPI host driver. */
++	strlcpy(bi->modalias, "mmc_spi", sizeof(bi->modalias));
++
++	bi->max_speed_hz = pdata->max_bus_speed;
++	bi->bus_num = master->bus_num;
++	bi->mode = pdata->mode;
++
++	return 0;
++}
++
++static int gpiommc_probe(struct platform_device *pdev)
++{
++	struct gpiommc_platform_data *mmc_pdata = pdev->dev.platform_data;
++	struct spi_gpio_platform_data spi_pdata;
++	struct gpiommc_device *d;
++	int err;
++
++	err = -ENXIO;
++	if (!mmc_pdata)
++		goto error;
++
++#ifdef CONFIG_MMC_SPI_MODULE
++	err = request_module("mmc_spi");
++	if (err) {
++		printk(KERN_WARNING PFX
++		       "Failed to request mmc_spi module.\n");
++	}
++#endif /* CONFIG_MMC_SPI_MODULE */
++
++	/* Allocate the GPIO-MMC device */
++	err = -ENOMEM;
++	d = kzalloc(sizeof(*d), GFP_KERNEL);
++	if (!d)
++		goto error;
++	d->pdev = pdev;
++
++	/* Create the SPI-GPIO device */
++	d->spi_pdev = platform_device_alloc(SPI_GPIO_PLATDEV_NAME,
++					    spi_gpio_next_id());
++	if (!d->spi_pdev)
++		goto err_free_d;
++
++	memset(&spi_pdata, 0, sizeof(spi_pdata));
++	spi_pdata.pin_clk = mmc_pdata->pins.gpio_clk;
++	spi_pdata.pin_miso = mmc_pdata->pins.gpio_do;
++	spi_pdata.pin_mosi = mmc_pdata->pins.gpio_di;
++	spi_pdata.pin_cs = mmc_pdata->pins.gpio_cs;
++	spi_pdata.cs_activelow = mmc_pdata->pins.cs_activelow;
++	spi_pdata.no_spi_delay = mmc_pdata->no_spi_delay;
++	spi_pdata.boardinfo_setup = gpiommc_boardinfo_setup;
++	spi_pdata.boardinfo_setup_data = d;
++
++	err = platform_device_add_data(d->spi_pdev, &spi_pdata,
++				       sizeof(spi_pdata));
++	if (err)
++		goto err_free_pdev;
++	err = platform_device_add(d->spi_pdev);
++	if (err)
++		goto err_free_pdata;
++	platform_set_drvdata(pdev, d);
++
++	printk(KERN_INFO PFX "MMC-Card \"%s\" "
++	       "attached to GPIO pins di=%u, do=%u, clk=%u, cs=%u\n",
++	       mmc_pdata->name, mmc_pdata->pins.gpio_di,
++	       mmc_pdata->pins.gpio_do,
++	       mmc_pdata->pins.gpio_clk,
++	       mmc_pdata->pins.gpio_cs);
++
++	return 0;
++
++err_free_pdata:
++	kfree(d->spi_pdev->dev.platform_data);
++	d->spi_pdev->dev.platform_data = NULL;
++err_free_pdev:
++	platform_device_put(d->spi_pdev);
++err_free_d:
++	kfree(d);
++error:
++	return err;
++}
++
++static int gpiommc_remove(struct platform_device *pdev)
++{
++	struct gpiommc_device *d = platform_get_drvdata(pdev);
++	struct gpiommc_platform_data *pdata = d->pdev->dev.platform_data;
++
++	platform_device_unregister(d->spi_pdev);
++	printk(KERN_INFO PFX "GPIO based MMC-Card \"%s\" removed\n",
++	       pdata->name);
++	platform_device_put(d->spi_pdev);
++
++	return 0;
++}
++
++#ifdef CONFIG_GPIOMMC_CONFIGFS
++
++/* A device that was created through configfs */
++struct gpiommc_configfs_device {
++	struct config_item item;
++	/* The platform device, after registration. */
++	struct platform_device *pdev;
++	/* The configuration */
++	struct gpiommc_platform_data pdata;
++};
++
++#define GPIO_INVALID	-1
++
++static inline bool gpiommc_is_registered(struct gpiommc_configfs_device *dev)
++{
++	return (dev->pdev != NULL);
++}
++
++static inline struct gpiommc_configfs_device *ci_to_gpiommc(struct config_item *item)
++{
++	return item ? container_of(item, struct gpiommc_configfs_device, item) : NULL;
++}
++
++static struct configfs_attribute gpiommc_attr_DI = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_data_in",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_DO = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_data_out",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_CLK = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_clock",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_CS = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_chipselect",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_CS_activelow = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "gpio_chipselect_activelow",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_spimode = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "spi_mode",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_spidelay = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "spi_delay",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_max_bus_speed = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "max_bus_speed",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute gpiommc_attr_register = {
++	.ca_owner = THIS_MODULE,
++	.ca_name = "register",
++	.ca_mode = S_IRUGO | S_IWUSR,
++};
++
++static struct configfs_attribute *gpiommc_config_attrs[] = {
++	&gpiommc_attr_DI,
++	&gpiommc_attr_DO,
++	&gpiommc_attr_CLK,
++	&gpiommc_attr_CS,
++	&gpiommc_attr_CS_activelow,
++	&gpiommc_attr_spimode,
++	&gpiommc_attr_spidelay,
++	&gpiommc_attr_max_bus_speed,
++	&gpiommc_attr_register,
++	NULL,
++};
++
++static ssize_t gpiommc_config_attr_show(struct config_item *item,
++					struct configfs_attribute *attr,
++					char *page)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++	ssize_t count = 0;
++	unsigned int gpio;
++	int err = 0;
++
++	if (attr == &gpiommc_attr_DI) {
++		gpio = dev->pdata.pins.gpio_di;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_DO) {
++		gpio = dev->pdata.pins.gpio_do;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CLK) {
++		gpio = dev->pdata.pins.gpio_clk;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS) {
++		gpio = dev->pdata.pins.gpio_cs;
++		if (gpio == GPIO_INVALID)
++			count = snprintf(page, PAGE_SIZE, "not configured\n");
++		else
++			count = snprintf(page, PAGE_SIZE, "%u\n", gpio);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS_activelow) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 dev->pdata.pins.cs_activelow);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spimode) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 dev->pdata.mode);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spidelay) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 !dev->pdata.no_spi_delay);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_max_bus_speed) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 dev->pdata.max_bus_speed);
++		goto out;
++	}
++	if (attr == &gpiommc_attr_register) {
++		count = snprintf(page, PAGE_SIZE, "%u\n",
++				 gpiommc_is_registered(dev));
++		goto out;
++	}
++	WARN_ON(1);
++	err = -ENOSYS;
++out:
++	return err ? err : count;
++}
++
++static int gpiommc_do_register(struct gpiommc_configfs_device *dev,
++			       const char *name)
++{
++	int err;
++
++	if (gpiommc_is_registered(dev))
++		return 0;
++
++	if (!gpio_is_valid(dev->pdata.pins.gpio_di) ||
++	    !gpio_is_valid(dev->pdata.pins.gpio_do) ||
++	    !gpio_is_valid(dev->pdata.pins.gpio_clk) ||
++	    !gpio_is_valid(dev->pdata.pins.gpio_cs)) {
++		printk(KERN_ERR PFX
++		       "configfs: Invalid GPIO pin number(s)\n");
++		return -EINVAL;
++	}
++
++	strlcpy(dev->pdata.name, name,
++		sizeof(dev->pdata.name));
++
++	dev->pdev = platform_device_alloc(GPIOMMC_PLATDEV_NAME,
++					  gpiommc_next_id());
++	if (!dev->pdev)
++		return -ENOMEM;
++	err = platform_device_add_data(dev->pdev, &dev->pdata,
++				       sizeof(dev->pdata));
++	if (err) {
++		platform_device_put(dev->pdev);
++		return err;
++	}
++	err = platform_device_add(dev->pdev);
++	if (err) {
++		platform_device_put(dev->pdev);
++		return err;
++	}
++
++	return 0;
++}
++
++static void gpiommc_do_unregister(struct gpiommc_configfs_device *dev)
++{
++	if (!gpiommc_is_registered(dev))
++		return;
++
++	platform_device_unregister(dev->pdev);
++	dev->pdev = NULL;
++}
++
++static ssize_t gpiommc_config_attr_store(struct config_item *item,
++					 struct configfs_attribute *attr,
++					 const char *page, size_t count)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++	int err = -EINVAL;
++	unsigned long data;
++
++	if (attr == &gpiommc_attr_register) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data == 1)
++			err = gpiommc_do_register(dev, item->ci_name);
++		if (data == 0) {
++			gpiommc_do_unregister(dev);
++			err = 0;
++		}
++		goto out;
++	}
++
++	if (gpiommc_is_registered(dev)) {
++		/* The rest of the config parameters can only be set
++		 * as long as the device is not registered, yet. */
++		err = -EBUSY;
++		goto out;
++	}
++
++	if (attr == &gpiommc_attr_DI) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_di = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_DO) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_do = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CLK) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_clk = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (!gpio_is_valid(data))
++			goto out;
++		dev->pdata.pins.gpio_cs = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_CS_activelow) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data != 0 && data != 1)
++			goto out;
++		dev->pdata.pins.cs_activelow = data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spimode) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		switch (data) {
++		case 0:
++			dev->pdata.mode = SPI_MODE_0;
++			break;
++		case 1:
++			dev->pdata.mode = SPI_MODE_1;
++			break;
++		case 2:
++			dev->pdata.mode = SPI_MODE_2;
++			break;
++		case 3:
++			dev->pdata.mode = SPI_MODE_3;
++			break;
++		default:
++			goto out;
++		}
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_spidelay) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data != 0 && data != 1)
++			goto out;
++		dev->pdata.no_spi_delay = !data;
++		err = 0;
++		goto out;
++	}
++	if (attr == &gpiommc_attr_max_bus_speed) {
++		err = strict_strtoul(page, 10, &data);
++		if (err)
++			goto out;
++		err = -EINVAL;
++		if (data > UINT_MAX)
++			goto out;
++		dev->pdata.max_bus_speed = data;
++		err = 0;
++		goto out;
++	}
++	WARN_ON(1);
++	err = -ENOSYS;
++out:
++	return err ? err : count;
++}
++
++static void gpiommc_config_item_release(struct config_item *item)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++
++	kfree(dev);
++}
++
++static struct configfs_item_operations gpiommc_config_item_ops = {
++	.release		= gpiommc_config_item_release,
++	.show_attribute		= gpiommc_config_attr_show,
++	.store_attribute	= gpiommc_config_attr_store,
++};
++
++static struct config_item_type gpiommc_dev_ci_type = {
++	.ct_item_ops	= &gpiommc_config_item_ops,
++	.ct_attrs	= gpiommc_config_attrs,
++	.ct_owner	= THIS_MODULE,
++};
++
++static struct config_item *gpiommc_make_item(struct config_group *group,
++					     const char *name)
++{
++	struct gpiommc_configfs_device *dev;
++
++	if (strlen(name) > GPIOMMC_MAX_NAMELEN) {
++		printk(KERN_ERR PFX "configfs: device name too long\n");
++		return NULL;
++	}
++
++	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
++	if (!dev)
++		return NULL;
++
++	config_item_init_type_name(&dev->item, name,
++				   &gpiommc_dev_ci_type);
++
++	/* Assign default configuration */
++	dev->pdata.pins.gpio_di = GPIO_INVALID;
++	dev->pdata.pins.gpio_do = GPIO_INVALID;
++	dev->pdata.pins.gpio_clk = GPIO_INVALID;
++	dev->pdata.pins.gpio_cs = GPIO_INVALID;
++	dev->pdata.pins.cs_activelow = 1;
++	dev->pdata.mode = SPI_MODE_0;
++	dev->pdata.no_spi_delay = 0;
++	dev->pdata.max_bus_speed = 5000000; /* 5 MHz */
++
++	return &(dev->item);
++}
++
++static void gpiommc_drop_item(struct config_group *group,
++			      struct config_item *item)
++{
++	struct gpiommc_configfs_device *dev = ci_to_gpiommc(item);
++
++	gpiommc_do_unregister(dev);
++	kfree(dev);
++}
++
++static struct configfs_group_operations gpiommc_ct_group_ops = {
++	.make_item	= gpiommc_make_item,
++	.drop_item	= gpiommc_drop_item,
++};
++
++static struct config_item_type gpiommc_ci_type = {
++	.ct_group_ops	= &gpiommc_ct_group_ops,
++	.ct_owner	= THIS_MODULE,
++};
++
++static struct configfs_subsystem gpiommc_subsys = {
++	.su_group = {
++		.cg_item = {
++			.ci_namebuf = GPIOMMC_PLATDEV_NAME,
++			.ci_type = &gpiommc_ci_type,
++		},
++	},
++	.su_mutex = __MUTEX_INITIALIZER(gpiommc_subsys.su_mutex),
++};
++
++#endif /* CONFIG_GPIOMMC_CONFIGFS */
++
++static struct platform_driver gpiommc_plat_driver = {
++	.probe	= gpiommc_probe,
++	.remove	= gpiommc_remove,
++	.driver	= {
++		.name	= GPIOMMC_PLATDEV_NAME,
++		.owner	= THIS_MODULE,
++	},
++};
++
++int gpiommc_next_id(void)
++{
++	static atomic_t counter = ATOMIC_INIT(-1);
++
++	return atomic_inc_return(&counter);
++}
++EXPORT_SYMBOL(gpiommc_next_id);
++
++static int __init gpiommc_modinit(void)
++{
++	int err;
++
++	err = platform_driver_register(&gpiommc_plat_driver);
++	if (err)
++		return err;
++
++#ifdef CONFIG_GPIOMMC_CONFIGFS
++	config_group_init(&gpiommc_subsys.su_group);
++	err = configfs_register_subsystem(&gpiommc_subsys);
++	if (err) {
++		platform_driver_unregister(&gpiommc_plat_driver);
++		return err;
++	}
++#endif /* CONFIG_GPIOMMC_CONFIGFS */
++
++	return 0;
++}
++module_init(gpiommc_modinit);
++
++static void __exit gpiommc_modexit(void)
++{
++#ifdef CONFIG_GPIOMMC_CONFIGFS
++	configfs_unregister_subsystem(&gpiommc_subsys);
++#endif
++	platform_driver_unregister(&gpiommc_plat_driver);
++}
++module_exit(gpiommc_modexit);
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -370,6 +370,31 @@ config MMC_TMIO
+ 	  This provides support for the SD/MMC cell found in TC6393XB,
+ 	  T7L66XB and also HTC ASIC3
+ 
++config GPIOMMC
++	tristate "MMC/SD over GPIO-based SPI"
++	depends on MMC && MMC_SPI && SPI_GPIO_OLD
++	help
++	  This driver hooks up the mmc_spi and spi_gpio modules so that
++	  MMC/SD cards can be used on a GPIO based bus by bitbanging
++	  the SPI protocol in software.
++
++	  This driver provides a configfs interface to dynamically create
++	  and destroy GPIO-based MMC/SD card devices. It also provides
++	  a platform device interface API.
++	  See Documentation/gpiommc.txt for details.
++
++	  The module will be called gpiommc.
++
++	  If unsure, say N.
++
++config GPIOMMC_CONFIGFS
++	bool
++	depends on GPIOMMC && CONFIGFS_FS
++	default y
++	help
++	  This option automatically enables configfs support for gpiommc
++	  if configfs is available.
++
+ config MMC_CB710
+ 	tristate "ENE CB710 MMC/SD Interface support"
+ 	depends on PCI
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -33,6 +33,7 @@ obj-$(CONFIG_MMC_SDRICOH_CS)	+= sdricoh_
+ obj-$(CONFIG_MMC_TMIO)		+= tmio_mmc.o
+ obj-$(CONFIG_MMC_CB710)	+= cb710-mmc.o
+ obj-$(CONFIG_MMC_VIA_SDMMC)	+= via-sdmmc.o
++obj-$(CONFIG_GPIOMMC)		+= gpiommc.o
+ obj-$(CONFIG_SDH_BFIN)		+= bfin_sdh.o
+ 
+ obj-$(CONFIG_MMC_SDHCI_OF)	+= sdhci-of.o
+--- /dev/null
++++ b/include/linux/mmc/gpiommc.h
+@@ -0,0 +1,71 @@
++/*
++ * Device driver for MMC/SD cards driven over a GPIO bus.
++ *
++ * Copyright (c) 2008 Michael Buesch
++ *
++ * Licensed under the GNU/GPL version 2.
++ */
++#ifndef LINUX_GPIOMMC_H_
++#define LINUX_GPIOMMC_H_
++
++#include <linux/types.h>
++
++
++#define GPIOMMC_MAX_NAMELEN		15
++#define GPIOMMC_MAX_NAMELEN_STR		__stringify(GPIOMMC_MAX_NAMELEN)
++
++/**
++ * struct gpiommc_pins - Hardware pin assignments
++ *
++ * @gpio_di: The GPIO number of the DATA IN pin
++ * @gpio_do: The GPIO number of the DATA OUT pin
++ * @gpio_clk: The GPIO number of the CLOCK pin
++ * @gpio_cs: The GPIO number of the CHIPSELECT pin
++ * @cs_activelow: If true, the chip is considered selected if @gpio_cs is low.
++ */
++struct gpiommc_pins {
++	unsigned int gpio_di;
++	unsigned int gpio_do;
++	unsigned int gpio_clk;
++	unsigned int gpio_cs;
++	bool cs_activelow;
++};
++
++/**
++ * struct gpiommc_platform_data - Platform data for a MMC-over-SPI-GPIO device.
++ *
++ * @name: The unique name string of the device.
++ * @pins: The hardware pin assignments.
++ * @mode: The hardware mode. This is either SPI_MODE_0,
++ *        SPI_MODE_1, SPI_MODE_2 or SPI_MODE_3. See the SPI documentation.
++ * @no_spi_delay: Do not use delays in the lowlevel SPI bitbanging code.
++ *                This is not standards compliant, but may be required for some
++ *                embedded machines to gain reasonable speed.
++ * @max_bus_speed: The maximum speed of the SPI bus, in Hertz.
++ */
++struct gpiommc_platform_data {
++	char name[GPIOMMC_MAX_NAMELEN + 1];
++	struct gpiommc_pins pins;
++	u8 mode;
++	bool no_spi_delay;
++	unsigned int max_bus_speed;
++};
++
++/**
++ * GPIOMMC_PLATDEV_NAME - The platform device name string.
++ *
++ * The name string that has to be used for platform_device_alloc
++ * when allocating a gpiommc device.
++ */
++#define GPIOMMC_PLATDEV_NAME	"gpiommc"
++
++/**
++ * gpiommc_next_id - Get another platform device ID number.
++ *
++ * This returns the next platform device ID number that has to be used
++ * for platform_device_alloc. The ID is opaque and should not be used for
++ * anything else.
++ */
++int gpiommc_next_id(void);
++
++#endif /* LINUX_GPIOMMC_H_ */
+--- /dev/null
++++ b/Documentation/gpiommc.txt
+@@ -0,0 +1,97 @@
++GPIOMMC - Driver for an MMC/SD card on a bitbanging GPIO SPI bus
++================================================================
++
++The gpiommc module hooks up the mmc_spi and spi_gpio modules for running an
++MMC or SD card on GPIO pins.
++
++Two interfaces for registering a new MMC/SD card device are provided:
++A static platform-device based mechanism and a dynamic configfs based interface.
++
++
++Registering devices via platform-device
++=======================================
++
++The platform-device interface is used for registering MMC/SD devices that are
++part of the hardware platform. This is most useful only for embedded machines
++with MMC/SD devices statically connected to the platform GPIO bus.
++
++The data structures are declared in <linux/mmc/gpiommc.h>.
++
++To register a new device, define an instance of struct gpiommc_platform_data.
++This structure holds any information about how the device is hooked up to the
++GPIO pins and what hardware modes the device supports. See the docbook-style
++documentation in the header file for more information on the struct fields.
++
++Then allocate a new instance of a platform device by doing:
++
++	pdev = platform_device_alloc(GPIOMMC_PLATDEV_NAME, gpiommc_next_id());
++
++This will allocate the platform device data structures and hook it up to the
++gpiommc driver.
++Then add the gpiommc_platform_data to the platform device.
++
++	err = platform_device_add_data(pdev, pdata, sizeof(struct gpiommc_platform_data));
++
++You may free the local instance of struct gpiommc_platform_data now. (So the
++struct may be allocated on the stack, too).
++Now simply register the platform device.
++
++	err = platform_device_add(pdev);
++
++Done. The gpiommc probe routine will be invoked now and you should see a kernel
++log message for the added device.
++
++
++Registering devices via configfs
++================================
++
++MMC/SD cards connected via GPIO often are a pretty dynamic thing, as for example
++selfmade hacks for soldering an MMC/SD card to standard GPIO pins on embedded
++hardware are a common situation.
++So we provide a dynamic interface to conveniently handle adding and removing
++devices from userspace, without the need to recompile the kernel.
++
++The "gpiommc" subdirectory at the configfs mountpoint is used for handling
++the dynamic configuration.
++
++To create a new device, it must first be allocated with mkdir.
++The following command will allocate a device named "my_mmc":
++	mkdir /config/gpiommc/my_mmc
++
++There are several configuration files available in the new
++/config/gpiommc/my_mmc/ directory:
++
++gpio_data_in			= The SPI data-IN GPIO pin number.
++gpio_data_out			= The SPI data-OUT GPIO pin number.
++gpio_clock			= The SPI Clock GPIO pin number.
++gpio_chipselect			= The SPI Chipselect GPIO pin number.
++gpio_chipselect_activelow	= Boolean. If 0, Chipselect is active-HIGH.
++				  If 1, Chipselect is active-LOW.
++spi_mode			= The SPI data mode. Can be 0-3.
++spi_delay			= Enable all delays in the lowlevel bitbanging.
++max_bus_speed			= The maximum SPI bus speed. In Hertz.
++
++register			= Not a configuration parameter.
++				  Used to register the configured card
++				  with the kernel.
++
++The device must first get configured and then registered by writing "1" to
++the "register" file.
++The configuration parameters "gpio_data_in", "gpio_data_out", "gpio_clock"
++and "gpio_chipselect" are essential and _must_ be configured before writing
++"1" to the "register" file. The registration will fail, otherwise.
++
++The default values for the other parameters are:
++gpio_chipselect_activelow	= 1		(CS active-LOW)
++spi_mode			= 0		(SPI_MODE_0)
++spi_delay			= 1		(enabled)
++max_bus_speed			= 5000000	(5 Mhz)
++
++Configuration values can not be changed after registration. To unregister
++the device, write a "0" to the "register" file. The configuration can be
++changed again after unregistering.
++
++To completely remove the device, simply rmdir the directory
++(/config/gpiommc/my_mmc in this example).
++There's no need to first unregister the device before removing it. That will
++be done automatically.
+--- a/MAINTAINERS
++++ b/MAINTAINERS
+@@ -2540,6 +2540,11 @@ T:	git git://git.kernel.org/pub/scm/linu
+ S:	Maintained
+ F:	drivers/media/video/gspca/
+ 
++GPIOMMC DRIVER
++P:	Michael Buesch
++M:	mb@bu3sch.de
++S:	Maintained
++
+ HARDWARE MONITORING
+ L:	lm-sensors@lm-sensors.org
+ W:	http://www.lm-sensors.org/
diff --git a/target/linux/generic/patches-2.6.35/923-gpiommc-configfs-locking.patch b/target/linux/generic/patches-2.6.35/923-gpiommc-configfs-locking.patch
new file mode 100644
index 0000000000..2e4e820b2b
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/923-gpiommc-configfs-locking.patch
@@ -0,0 +1,58 @@
+The gpiommc configfs context structure needs locking, as configfs
+does not lock access between files.
+
+--- a/drivers/mmc/host/gpiommc.c
++++ b/drivers/mmc/host/gpiommc.c
+@@ -143,6 +143,8 @@ struct gpiommc_configfs_device {
+ 	struct platform_device *pdev;
+ 	/* The configuration */
+ 	struct gpiommc_platform_data pdata;
++	/* Mutex to protect this structure */
++	struct mutex mutex;
+ };
+ 
+ #define GPIO_INVALID	-1
+@@ -233,6 +235,8 @@ static ssize_t gpiommc_config_attr_show(
+ 	unsigned int gpio;
+ 	int err = 0;
+ 
++	mutex_lock(&dev->mutex);
++
+ 	if (attr == &gpiommc_attr_DI) {
+ 		gpio = dev->pdata.pins.gpio_di;
+ 		if (gpio == GPIO_INVALID)
+@@ -293,6 +297,8 @@ static ssize_t gpiommc_config_attr_show(
+ 	WARN_ON(1);
+ 	err = -ENOSYS;
+ out:
++	mutex_unlock(&dev->mutex);
++
+ 	return err ? err : count;
+ }
+ 
+@@ -352,6 +358,8 @@ static ssize_t gpiommc_config_attr_store
+ 	int err = -EINVAL;
+ 	unsigned long data;
+ 
++	mutex_lock(&dev->mutex);
++
+ 	if (attr == &gpiommc_attr_register) {
+ 		err = strict_strtoul(page, 10, &data);
+ 		if (err)
+@@ -477,6 +485,8 @@ static ssize_t gpiommc_config_attr_store
+ 	WARN_ON(1);
+ 	err = -ENOSYS;
+ out:
++	mutex_unlock(&dev->mutex);
++
+ 	return err ? err : count;
+ }
+ 
+@@ -513,6 +523,7 @@ static struct config_item *gpiommc_make_
+ 	if (!dev)
+ 		return NULL;
+ 
++	mutex_init(&dev->mutex);
+ 	config_item_init_type_name(&dev->item, name,
+ 				   &gpiommc_dev_ci_type);
+ 
diff --git a/target/linux/generic/patches-2.6.35/924-cs5535_gpio.patch b/target/linux/generic/patches-2.6.35/924-cs5535_gpio.patch
new file mode 100644
index 0000000000..9081be84a4
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/924-cs5535_gpio.patch
@@ -0,0 +1,102 @@
+--- a/drivers/char/cs5535_gpio.c
++++ b/drivers/char/cs5535_gpio.c
+@@ -15,6 +15,7 @@
+ #include <linux/kernel.h>
+ #include <linux/init.h>
+ #include <linux/cdev.h>
++#include <linux/device.h>
+ #include <linux/ioport.h>
+ #include <linux/pci.h>
+ 
+@@ -48,6 +49,7 @@ static struct pci_device_id divil_pci[]
+ MODULE_DEVICE_TABLE(pci, divil_pci);
+ 
+ static struct cdev cs5535_gpio_cdev;
++static struct class *cs5535_gpio_class;
+ 
+ /* reserve 32 entries even though some aren't usable */
+ #define CS5535_GPIO_COUNT	32
+@@ -66,9 +68,14 @@ static struct gpio_regmap rm[] =
+ 	{ 0x30, 0x00, '1', '0' },	/* GPIOx_READ_BACK / GPIOx_OUT_VAL */
+ 	{ 0x20, 0x20, 'I', 'i' },	/* GPIOx_IN_EN */
+ 	{ 0x04, 0x04, 'O', 'o' },	/* GPIOx_OUT_EN */
++	{ 0x10, 0x10, 'A', 'a' },	/* GPIOx_OUT_AUX1_SEL */
++	{ 0x14, 0x14, 'B', 'b' },	/* GPIOx_OUT_AUX2_SEL */
+ 	{ 0x08, 0x08, 't', 'T' },	/* GPIOx_OUT_OD_EN */
+ 	{ 0x18, 0x18, 'P', 'p' },	/* GPIOx_OUT_PU_EN */
+ 	{ 0x1c, 0x1c, 'D', 'd' },	/* GPIOx_OUT_PD_EN */
++	{ 0x24, 0x24, 'N', 'n' },	/* GPIOx_IN_INV_EN */
++	{ 0x0c, 0x0c, 'X', 'x' },	/* GPIOx_OUT_INV_EN */
++	{ 0x00, 0x00, 'H', 'L' },	/* GPIOx_OUT_VAL */
+ };
+ 
+ 
+@@ -176,7 +183,7 @@ static int __init cs5535_gpio_init(void)
+ {
+ 	dev_t	dev_id;
+ 	u32	low, hi;
+-	int	retval;
++	int	retval, i;
+ 
+ 	if (pci_dev_present(divil_pci) == 0) {
+ 		printk(KERN_WARNING NAME ": DIVIL not found\n");
+@@ -231,23 +238,54 @@ static int __init cs5535_gpio_init(void)
+ 		major = MAJOR(dev_id);
+ 	}
+ 
+-	if (retval) {
+-		release_region(gpio_base, CS5535_GPIO_SIZE);
+-		return -1;
+-	}
++	if (retval)
++		goto error;
+ 
+ 	printk(KERN_DEBUG NAME ": base=%#x mask=%#lx major=%d\n",
+ 	       gpio_base, mask, major);
+ 
+ 	cdev_init(&cs5535_gpio_cdev, &cs5535_gpio_fops);
+-	cdev_add(&cs5535_gpio_cdev, dev_id, CS5535_GPIO_COUNT);
++	retval = cdev_add(&cs5535_gpio_cdev, dev_id, CS5535_GPIO_COUNT);
++	if (retval) {
++		kobject_put(&cs5535_gpio_cdev.kobj);
++		goto error_region;
++	}
++
++	cs5535_gpio_class = class_create(THIS_MODULE, "cs5535_gpio");
++	if (IS_ERR(cs5535_gpio_class)) {
++		printk(KERN_ERR "Error creating cs5535_gpio class\n");
++		cdev_del(&cs5535_gpio_cdev);
++		retval = PTR_ERR(cs5535_gpio_class);
++		goto error_region;
++	}
++
++	for (i = 0; i < CS5535_GPIO_COUNT; i++) {
++		if (mask & (1<<i)) {
++			device_create(cs5535_gpio_class, NULL, MKDEV(major, i), NULL, "cs5535_gpio%d", i);
++		}
++	}
+ 
+ 	return 0;
++
++error_region:
++	unregister_chrdev_region(dev_id, CS5535_GPIO_COUNT);
++error:
++	release_region(gpio_base, CS5535_GPIO_SIZE);
++	return retval;
+ }
+ 
+ static void __exit cs5535_gpio_cleanup(void)
+ {
+ 	dev_t dev_id = MKDEV(major, 0);
++	int i;
++
++	for (i = 0; i < CS5535_GPIO_COUNT; i++) {
++		if (mask & (1<<i)) {
++			device_destroy(cs5535_gpio_class, MKDEV(major, i));
++		}
++	}
++
++	class_destroy(cs5535_gpio_class);
+ 
+ 	cdev_del(&cs5535_gpio_cdev);
+ 	unregister_chrdev_region(dev_id, CS5535_GPIO_COUNT);
diff --git a/target/linux/generic/patches-2.6.35/940-wireless_mesh_header.patch b/target/linux/generic/patches-2.6.35/940-wireless_mesh_header.patch
new file mode 100644
index 0000000000..33d5299f25
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/940-wireless_mesh_header.patch
@@ -0,0 +1,11 @@
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -138,7 +138,7 @@ static inline bool dev_xmit_complete(int
+  */
+ 
+ #if defined(CONFIG_WLAN) || defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
+-# if defined(CONFIG_MAC80211_MESH)
++# if 1 || defined(CONFIG_MAC80211_MESH)
+ #  define LL_MAX_HEADER 128
+ # else
+ #  define LL_MAX_HEADER 96
diff --git a/target/linux/generic/patches-2.6.35/951-revert_gcc4_4_fixes.patch b/target/linux/generic/patches-2.6.35/951-revert_gcc4_4_fixes.patch
new file mode 100644
index 0000000000..d2c76a8f2b
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/951-revert_gcc4_4_fixes.patch
@@ -0,0 +1,524 @@
+--- a/arch/powerpc/boot/crtsavres.S
++++ /dev/null
+@@ -1,233 +0,0 @@
+-/*
+- * Special support for eabi and SVR4
+- *
+- *   Copyright (C) 1995, 1996, 1998, 2000, 2001 Free Software Foundation, Inc.
+- *   Copyright 2008 Freescale Semiconductor, Inc.
+- *   Written By Michael Meissner
+- *
+- * Based on gcc/config/rs6000/crtsavres.asm from gcc
+- *
+- * This file is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License as published by the
+- * Free Software Foundation; either version 2, or (at your option) any
+- * later version.
+- *
+- * In addition to the permissions in the GNU General Public License, the
+- * Free Software Foundation gives you unlimited permission to link the
+- * compiled version of this file with other programs, and to distribute
+- * those programs without any restriction coming from the use of this
+- * file.  (The General Public License restrictions do apply in other
+- * respects; for example, they cover modification of the file, and
+- * distribution when not linked into another program.)
+- *
+- * This file is distributed in the hope that it will be useful, but
+- * WITHOUT ANY WARRANTY; without even the implied warranty of
+- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+- * General Public License for more details.
+- *
+- * You should have received a copy of the GNU General Public License
+- * along with this program; see the file COPYING.  If not, write to
+- * the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+- * Boston, MA 02110-1301, USA.
+- *
+- *    As a special exception, if you link this library with files
+- *    compiled with GCC to produce an executable, this does not cause
+- *    the resulting executable to be covered by the GNU General Public License.
+- *    This exception does not however invalidate any other reasons why
+- *    the executable file might be covered by the GNU General Public License.
+- */
+-
+-	.file	"crtsavres.S"
+-	.section ".text"
+-
+-/* On PowerPC64 Linux, these functions are provided by the linker.  */
+-#ifndef __powerpc64__
+-
+-#define _GLOBAL(name) \
+-	.type name,@function; \
+-	.globl name; \
+-name:
+-
+-/* Routines for saving integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer save area.  */
+-
+-_GLOBAL(_savegpr_14)
+-_GLOBAL(_save32gpr_14)
+-	stw	14,-72(11)	/* save gp registers */
+-_GLOBAL(_savegpr_15)
+-_GLOBAL(_save32gpr_15)
+-	stw	15,-68(11)
+-_GLOBAL(_savegpr_16)
+-_GLOBAL(_save32gpr_16)
+-	stw	16,-64(11)
+-_GLOBAL(_savegpr_17)
+-_GLOBAL(_save32gpr_17)
+-	stw	17,-60(11)
+-_GLOBAL(_savegpr_18)
+-_GLOBAL(_save32gpr_18)
+-	stw	18,-56(11)
+-_GLOBAL(_savegpr_19)
+-_GLOBAL(_save32gpr_19)
+-	stw	19,-52(11)
+-_GLOBAL(_savegpr_20)
+-_GLOBAL(_save32gpr_20)
+-	stw	20,-48(11)
+-_GLOBAL(_savegpr_21)
+-_GLOBAL(_save32gpr_21)
+-	stw	21,-44(11)
+-_GLOBAL(_savegpr_22)
+-_GLOBAL(_save32gpr_22)
+-	stw	22,-40(11)
+-_GLOBAL(_savegpr_23)
+-_GLOBAL(_save32gpr_23)
+-	stw	23,-36(11)
+-_GLOBAL(_savegpr_24)
+-_GLOBAL(_save32gpr_24)
+-	stw	24,-32(11)
+-_GLOBAL(_savegpr_25)
+-_GLOBAL(_save32gpr_25)
+-	stw	25,-28(11)
+-_GLOBAL(_savegpr_26)
+-_GLOBAL(_save32gpr_26)
+-	stw	26,-24(11)
+-_GLOBAL(_savegpr_27)
+-_GLOBAL(_save32gpr_27)
+-	stw	27,-20(11)
+-_GLOBAL(_savegpr_28)
+-_GLOBAL(_save32gpr_28)
+-	stw	28,-16(11)
+-_GLOBAL(_savegpr_29)
+-_GLOBAL(_save32gpr_29)
+-	stw	29,-12(11)
+-_GLOBAL(_savegpr_30)
+-_GLOBAL(_save32gpr_30)
+-	stw	30,-8(11)
+-_GLOBAL(_savegpr_31)
+-_GLOBAL(_save32gpr_31)
+-	stw	31,-4(11)
+-	blr
+-
+-/* Routines for restoring integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer restore area.  */
+-
+-_GLOBAL(_restgpr_14)
+-_GLOBAL(_rest32gpr_14)
+-	lwz	14,-72(11)	/* restore gp registers */
+-_GLOBAL(_restgpr_15)
+-_GLOBAL(_rest32gpr_15)
+-	lwz	15,-68(11)
+-_GLOBAL(_restgpr_16)
+-_GLOBAL(_rest32gpr_16)
+-	lwz	16,-64(11)
+-_GLOBAL(_restgpr_17)
+-_GLOBAL(_rest32gpr_17)
+-	lwz	17,-60(11)
+-_GLOBAL(_restgpr_18)
+-_GLOBAL(_rest32gpr_18)
+-	lwz	18,-56(11)
+-_GLOBAL(_restgpr_19)
+-_GLOBAL(_rest32gpr_19)
+-	lwz	19,-52(11)
+-_GLOBAL(_restgpr_20)
+-_GLOBAL(_rest32gpr_20)
+-	lwz	20,-48(11)
+-_GLOBAL(_restgpr_21)
+-_GLOBAL(_rest32gpr_21)
+-	lwz	21,-44(11)
+-_GLOBAL(_restgpr_22)
+-_GLOBAL(_rest32gpr_22)
+-	lwz	22,-40(11)
+-_GLOBAL(_restgpr_23)
+-_GLOBAL(_rest32gpr_23)
+-	lwz	23,-36(11)
+-_GLOBAL(_restgpr_24)
+-_GLOBAL(_rest32gpr_24)
+-	lwz	24,-32(11)
+-_GLOBAL(_restgpr_25)
+-_GLOBAL(_rest32gpr_25)
+-	lwz	25,-28(11)
+-_GLOBAL(_restgpr_26)
+-_GLOBAL(_rest32gpr_26)
+-	lwz	26,-24(11)
+-_GLOBAL(_restgpr_27)
+-_GLOBAL(_rest32gpr_27)
+-	lwz	27,-20(11)
+-_GLOBAL(_restgpr_28)
+-_GLOBAL(_rest32gpr_28)
+-	lwz	28,-16(11)
+-_GLOBAL(_restgpr_29)
+-_GLOBAL(_rest32gpr_29)
+-	lwz	29,-12(11)
+-_GLOBAL(_restgpr_30)
+-_GLOBAL(_rest32gpr_30)
+-	lwz	30,-8(11)
+-_GLOBAL(_restgpr_31)
+-_GLOBAL(_rest32gpr_31)
+-	lwz	31,-4(11)
+-	blr
+-
+-/* Routines for restoring integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer restore area.  */
+-
+-_GLOBAL(_restgpr_14_x)
+-_GLOBAL(_rest32gpr_14_x)
+-	lwz	14,-72(11)	/* restore gp registers */
+-_GLOBAL(_restgpr_15_x)
+-_GLOBAL(_rest32gpr_15_x)
+-	lwz	15,-68(11)
+-_GLOBAL(_restgpr_16_x)
+-_GLOBAL(_rest32gpr_16_x)
+-	lwz	16,-64(11)
+-_GLOBAL(_restgpr_17_x)
+-_GLOBAL(_rest32gpr_17_x)
+-	lwz	17,-60(11)
+-_GLOBAL(_restgpr_18_x)
+-_GLOBAL(_rest32gpr_18_x)
+-	lwz	18,-56(11)
+-_GLOBAL(_restgpr_19_x)
+-_GLOBAL(_rest32gpr_19_x)
+-	lwz	19,-52(11)
+-_GLOBAL(_restgpr_20_x)
+-_GLOBAL(_rest32gpr_20_x)
+-	lwz	20,-48(11)
+-_GLOBAL(_restgpr_21_x)
+-_GLOBAL(_rest32gpr_21_x)
+-	lwz	21,-44(11)
+-_GLOBAL(_restgpr_22_x)
+-_GLOBAL(_rest32gpr_22_x)
+-	lwz	22,-40(11)
+-_GLOBAL(_restgpr_23_x)
+-_GLOBAL(_rest32gpr_23_x)
+-	lwz	23,-36(11)
+-_GLOBAL(_restgpr_24_x)
+-_GLOBAL(_rest32gpr_24_x)
+-	lwz	24,-32(11)
+-_GLOBAL(_restgpr_25_x)
+-_GLOBAL(_rest32gpr_25_x)
+-	lwz	25,-28(11)
+-_GLOBAL(_restgpr_26_x)
+-_GLOBAL(_rest32gpr_26_x)
+-	lwz	26,-24(11)
+-_GLOBAL(_restgpr_27_x)
+-_GLOBAL(_rest32gpr_27_x)
+-	lwz	27,-20(11)
+-_GLOBAL(_restgpr_28_x)
+-_GLOBAL(_rest32gpr_28_x)
+-	lwz	28,-16(11)
+-_GLOBAL(_restgpr_29_x)
+-_GLOBAL(_rest32gpr_29_x)
+-	lwz	29,-12(11)
+-_GLOBAL(_restgpr_30_x)
+-_GLOBAL(_rest32gpr_30_x)
+-	lwz	30,-8(11)
+-_GLOBAL(_restgpr_31_x)
+-_GLOBAL(_rest32gpr_31_x)
+-	lwz	0,4(11)
+-	lwz	31,-4(11)
+-	mtlr	0
+-	mr	1,11
+-	blr
+-#endif
+--- a/arch/powerpc/boot/Makefile
++++ b/arch/powerpc/boot/Makefile
+@@ -60,7 +60,7 @@ libfdtheader := fdt.h libfdt.h libfdt_in
+ $(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o): \
+ 	$(addprefix $(obj)/,$(libfdtheader))
+ 
+-src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
++src-wlib := string.S crt0.S stdio.c main.c \
+ 		$(libfdt) libfdt-wrapper.c \
+ 		ns16550.c serial.c simple_alloc.c div64.S util.S \
+ 		gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
+--- a/arch/powerpc/kernel/prom_init_check.sh
++++ b/arch/powerpc/kernel/prom_init_check.sh
+@@ -48,20 +48,6 @@ do
+ 		fi
+ 	done
+ 
+-	# ignore register save/restore funcitons
+-	if [ "${UNDEF:0:9}" = "_restgpr_" ]; then
+-		OK=1
+-	fi
+-	if [ "${UNDEF:0:11}" = "_rest32gpr_" ]; then
+-		OK=1
+-	fi
+-	if [ "${UNDEF:0:9}" = "_savegpr_" ]; then
+-		OK=1
+-	fi
+-	if [ "${UNDEF:0:11}" = "_save32gpr_" ]; then
+-		OK=1
+-	fi
+-
+ 	if [ $OK -eq 0 ]; then
+ 		ERROR=1
+ 		echo "Error: External symbol '$UNDEF' referenced" \
+--- a/arch/powerpc/lib/crtsavres.S
++++ /dev/null
+@@ -1,229 +0,0 @@
+-/*
+- * Special support for eabi and SVR4
+- *
+- *   Copyright (C) 1995, 1996, 1998, 2000, 2001 Free Software Foundation, Inc.
+- *   Copyright 2008 Freescale Semiconductor, Inc.
+- *   Written By Michael Meissner
+- *
+- * Based on gcc/config/rs6000/crtsavres.asm from gcc
+- *
+- * This file is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License as published by the
+- * Free Software Foundation; either version 2, or (at your option) any
+- * later version.
+- *
+- * In addition to the permissions in the GNU General Public License, the
+- * Free Software Foundation gives you unlimited permission to link the
+- * compiled version of this file with other programs, and to distribute
+- * those programs without any restriction coming from the use of this
+- * file.  (The General Public License restrictions do apply in other
+- * respects; for example, they cover modification of the file, and
+- * distribution when not linked into another program.)
+- *
+- * This file is distributed in the hope that it will be useful, but
+- * WITHOUT ANY WARRANTY; without even the implied warranty of
+- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+- * General Public License for more details.
+- *
+- * You should have received a copy of the GNU General Public License
+- * along with this program; see the file COPYING.  If not, write to
+- * the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+- * Boston, MA 02110-1301, USA.
+- *
+- *    As a special exception, if you link this library with files
+- *    compiled with GCC to produce an executable, this does not cause
+- *    the resulting executable to be covered by the GNU General Public License.
+- *    This exception does not however invalidate any other reasons why
+- *    the executable file might be covered by the GNU General Public License.
+- */
+-
+-#include <asm/ppc_asm.h>
+-
+-	.file	"crtsavres.S"
+-	.section ".text"
+-
+-#ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+-
+-/* Routines for saving integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer save area.  */
+-
+-_GLOBAL(_savegpr_14)
+-_GLOBAL(_save32gpr_14)
+-	stw	14,-72(11)	/* save gp registers */
+-_GLOBAL(_savegpr_15)
+-_GLOBAL(_save32gpr_15)
+-	stw	15,-68(11)
+-_GLOBAL(_savegpr_16)
+-_GLOBAL(_save32gpr_16)
+-	stw	16,-64(11)
+-_GLOBAL(_savegpr_17)
+-_GLOBAL(_save32gpr_17)
+-	stw	17,-60(11)
+-_GLOBAL(_savegpr_18)
+-_GLOBAL(_save32gpr_18)
+-	stw	18,-56(11)
+-_GLOBAL(_savegpr_19)
+-_GLOBAL(_save32gpr_19)
+-	stw	19,-52(11)
+-_GLOBAL(_savegpr_20)
+-_GLOBAL(_save32gpr_20)
+-	stw	20,-48(11)
+-_GLOBAL(_savegpr_21)
+-_GLOBAL(_save32gpr_21)
+-	stw	21,-44(11)
+-_GLOBAL(_savegpr_22)
+-_GLOBAL(_save32gpr_22)
+-	stw	22,-40(11)
+-_GLOBAL(_savegpr_23)
+-_GLOBAL(_save32gpr_23)
+-	stw	23,-36(11)
+-_GLOBAL(_savegpr_24)
+-_GLOBAL(_save32gpr_24)
+-	stw	24,-32(11)
+-_GLOBAL(_savegpr_25)
+-_GLOBAL(_save32gpr_25)
+-	stw	25,-28(11)
+-_GLOBAL(_savegpr_26)
+-_GLOBAL(_save32gpr_26)
+-	stw	26,-24(11)
+-_GLOBAL(_savegpr_27)
+-_GLOBAL(_save32gpr_27)
+-	stw	27,-20(11)
+-_GLOBAL(_savegpr_28)
+-_GLOBAL(_save32gpr_28)
+-	stw	28,-16(11)
+-_GLOBAL(_savegpr_29)
+-_GLOBAL(_save32gpr_29)
+-	stw	29,-12(11)
+-_GLOBAL(_savegpr_30)
+-_GLOBAL(_save32gpr_30)
+-	stw	30,-8(11)
+-_GLOBAL(_savegpr_31)
+-_GLOBAL(_save32gpr_31)
+-	stw	31,-4(11)
+-	blr
+-
+-/* Routines for restoring integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer restore area.  */
+-
+-_GLOBAL(_restgpr_14)
+-_GLOBAL(_rest32gpr_14)
+-	lwz	14,-72(11)	/* restore gp registers */
+-_GLOBAL(_restgpr_15)
+-_GLOBAL(_rest32gpr_15)
+-	lwz	15,-68(11)
+-_GLOBAL(_restgpr_16)
+-_GLOBAL(_rest32gpr_16)
+-	lwz	16,-64(11)
+-_GLOBAL(_restgpr_17)
+-_GLOBAL(_rest32gpr_17)
+-	lwz	17,-60(11)
+-_GLOBAL(_restgpr_18)
+-_GLOBAL(_rest32gpr_18)
+-	lwz	18,-56(11)
+-_GLOBAL(_restgpr_19)
+-_GLOBAL(_rest32gpr_19)
+-	lwz	19,-52(11)
+-_GLOBAL(_restgpr_20)
+-_GLOBAL(_rest32gpr_20)
+-	lwz	20,-48(11)
+-_GLOBAL(_restgpr_21)
+-_GLOBAL(_rest32gpr_21)
+-	lwz	21,-44(11)
+-_GLOBAL(_restgpr_22)
+-_GLOBAL(_rest32gpr_22)
+-	lwz	22,-40(11)
+-_GLOBAL(_restgpr_23)
+-_GLOBAL(_rest32gpr_23)
+-	lwz	23,-36(11)
+-_GLOBAL(_restgpr_24)
+-_GLOBAL(_rest32gpr_24)
+-	lwz	24,-32(11)
+-_GLOBAL(_restgpr_25)
+-_GLOBAL(_rest32gpr_25)
+-	lwz	25,-28(11)
+-_GLOBAL(_restgpr_26)
+-_GLOBAL(_rest32gpr_26)
+-	lwz	26,-24(11)
+-_GLOBAL(_restgpr_27)
+-_GLOBAL(_rest32gpr_27)
+-	lwz	27,-20(11)
+-_GLOBAL(_restgpr_28)
+-_GLOBAL(_rest32gpr_28)
+-	lwz	28,-16(11)
+-_GLOBAL(_restgpr_29)
+-_GLOBAL(_rest32gpr_29)
+-	lwz	29,-12(11)
+-_GLOBAL(_restgpr_30)
+-_GLOBAL(_rest32gpr_30)
+-	lwz	30,-8(11)
+-_GLOBAL(_restgpr_31)
+-_GLOBAL(_rest32gpr_31)
+-	lwz	31,-4(11)
+-	blr
+-
+-/* Routines for restoring integer registers, called by the compiler.  */
+-/* Called with r11 pointing to the stack header word of the caller of the */
+-/* function, just beyond the end of the integer restore area.  */
+-
+-_GLOBAL(_restgpr_14_x)
+-_GLOBAL(_rest32gpr_14_x)
+-	lwz	14,-72(11)	/* restore gp registers */
+-_GLOBAL(_restgpr_15_x)
+-_GLOBAL(_rest32gpr_15_x)
+-	lwz	15,-68(11)
+-_GLOBAL(_restgpr_16_x)
+-_GLOBAL(_rest32gpr_16_x)
+-	lwz	16,-64(11)
+-_GLOBAL(_restgpr_17_x)
+-_GLOBAL(_rest32gpr_17_x)
+-	lwz	17,-60(11)
+-_GLOBAL(_restgpr_18_x)
+-_GLOBAL(_rest32gpr_18_x)
+-	lwz	18,-56(11)
+-_GLOBAL(_restgpr_19_x)
+-_GLOBAL(_rest32gpr_19_x)
+-	lwz	19,-52(11)
+-_GLOBAL(_restgpr_20_x)
+-_GLOBAL(_rest32gpr_20_x)
+-	lwz	20,-48(11)
+-_GLOBAL(_restgpr_21_x)
+-_GLOBAL(_rest32gpr_21_x)
+-	lwz	21,-44(11)
+-_GLOBAL(_restgpr_22_x)
+-_GLOBAL(_rest32gpr_22_x)
+-	lwz	22,-40(11)
+-_GLOBAL(_restgpr_23_x)
+-_GLOBAL(_rest32gpr_23_x)
+-	lwz	23,-36(11)
+-_GLOBAL(_restgpr_24_x)
+-_GLOBAL(_rest32gpr_24_x)
+-	lwz	24,-32(11)
+-_GLOBAL(_restgpr_25_x)
+-_GLOBAL(_rest32gpr_25_x)
+-	lwz	25,-28(11)
+-_GLOBAL(_restgpr_26_x)
+-_GLOBAL(_rest32gpr_26_x)
+-	lwz	26,-24(11)
+-_GLOBAL(_restgpr_27_x)
+-_GLOBAL(_rest32gpr_27_x)
+-	lwz	27,-20(11)
+-_GLOBAL(_restgpr_28_x)
+-_GLOBAL(_rest32gpr_28_x)
+-	lwz	28,-16(11)
+-_GLOBAL(_restgpr_29_x)
+-_GLOBAL(_rest32gpr_29_x)
+-	lwz	29,-12(11)
+-_GLOBAL(_restgpr_30_x)
+-_GLOBAL(_rest32gpr_30_x)
+-	lwz	30,-8(11)
+-_GLOBAL(_restgpr_31_x)
+-_GLOBAL(_rest32gpr_31_x)
+-	lwz	0,4(11)
+-	lwz	31,-4(11)
+-	mtlr	0
+-	mr	1,11
+-	blr
+-#endif
+--- a/arch/powerpc/lib/Makefile
++++ b/arch/powerpc/lib/Makefile
+@@ -13,7 +13,7 @@ CFLAGS_REMOVE_feature-fixups.o = -pg
+ 
+ obj-y			:= string.o alloc.o \
+ 			   checksum_$(CONFIG_WORD_SIZE).o
+-obj-$(CONFIG_PPC32)	+= div64.o copy_32.o crtsavres.o
++obj-$(CONFIG_PPC32)	+= div64.o copy_32.o
+ obj-$(CONFIG_HAS_IOMEM)	+= devres.o
+ 
+ obj-$(CONFIG_PPC64)	+= copypage_64.o copyuser_64.o \
+--- a/arch/powerpc/Makefile
++++ b/arch/powerpc/Makefile
+@@ -92,8 +92,6 @@ endif
+ else
+ 	KBUILD_CFLAGS += $(call cc-option,-mtune=power4)
+ endif
+-else
+-LDFLAGS_MODULE	+= arch/powerpc/lib/crtsavres.o
+ endif
+ 
+ ifeq ($(CONFIG_TUNE_CELL),y)
diff --git a/target/linux/generic/patches-2.6.35/970-ocf_kbuild_integration.patch b/target/linux/generic/patches-2.6.35/970-ocf_kbuild_integration.patch
new file mode 100644
index 0000000000..76413e9cef
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/970-ocf_kbuild_integration.patch
@@ -0,0 +1,20 @@
+--- a/crypto/Kconfig
++++ b/crypto/Kconfig
+@@ -836,3 +836,6 @@ config CRYPTO_ANSI_CPRNG
+ source "drivers/crypto/Kconfig"
+ 
+ endif	# if CRYPTO
++
++source "crypto/ocf/Kconfig"
++
+--- a/crypto/Makefile
++++ b/crypto/Makefile
+@@ -86,6 +86,8 @@ obj-$(CONFIG_CRYPTO_ANSI_CPRNG) += ansi_
+ obj-$(CONFIG_CRYPTO_TEST) += tcrypt.o
+ obj-$(CONFIG_CRYPTO_GHASH) += ghash-generic.o
+ 
++obj-$(CONFIG_OCF_OCF) += ocf/
++
+ #
+ # generic algorithms and the async_tx api
+ #
diff --git a/target/linux/generic/patches-2.6.35/971-ocf_20100325.patch b/target/linux/generic/patches-2.6.35/971-ocf_20100325.patch
new file mode 100644
index 0000000000..9aa36bcd50
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/971-ocf_20100325.patch
@@ -0,0 +1,170 @@
+--- a/drivers/char/random.c
++++ b/drivers/char/random.c
+@@ -129,6 +129,9 @@
+  *                                unsigned int value);
+  * 	void add_interrupt_randomness(int irq);
+  *
++ *      void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
++ *      int random_input_wait(void);
++ *
+  * add_input_randomness() uses the input layer interrupt timing, as well as
+  * the event type information from the hardware.
+  *
+@@ -140,6 +143,13 @@
+  * a better measure, since the timing of the disk interrupts are more
+  * unpredictable.
+  *
++ * random_input_words() just provides a raw block of entropy to the input
++ * pool, such as from a hardware entropy generator.
++ *
++ * random_input_wait() suspends the caller until such time as the
++ * entropy pool falls below the write threshold, and returns a count of how
++ * much entropy (in bits) is needed to sustain the pool.
++ *
+  * All of these routines try to estimate how many bits of randomness a
+  * particular randomness source.  They do this by keeping track of the
+  * first and second order deltas of the event timings.
+@@ -715,6 +725,61 @@ void add_disk_randomness(struct gendisk
+ }
+ #endif
+ 
++/*
++ * random_input_words - add bulk entropy to pool
++ *
++ * @buf: buffer to add
++ * @wordcount: number of __u32 words to add
++ * @ent_count: total amount of entropy (in bits) to credit
++ *
++ * this provides bulk input of entropy to the input pool
++ *
++ */
++void random_input_words(__u32 *buf, size_t wordcount, int ent_count)
++{
++        mix_pool_bytes(&input_pool, buf, wordcount*4);
++
++        credit_entropy_bits(&input_pool, ent_count);
++
++        DEBUG_ENT("crediting %d bits => %d\n",
++                  ent_count, input_pool.entropy_count);
++	/*
++	 * Wake up waiting processes if we have enough
++	 * entropy.
++	 */
++	if (input_pool.entropy_count >= random_read_wakeup_thresh)
++		wake_up_interruptible(&random_read_wait);
++}
++EXPORT_SYMBOL(random_input_words);
++
++/*
++ * random_input_wait - wait until random needs entropy
++ *
++ * this function sleeps until the /dev/random subsystem actually
++ * needs more entropy, and then return the amount of entropy
++ * that it would be nice to have added to the system.
++ */
++int random_input_wait(void)
++{
++	int count;
++
++	wait_event_interruptible(random_write_wait,
++		input_pool.entropy_count < random_write_wakeup_thresh);
++
++	count = random_write_wakeup_thresh - input_pool.entropy_count;
++
++	/* likely we got woken up due to a signal */
++	if (count <= 0) count = random_read_wakeup_thresh;
++
++	DEBUG_ENT("requesting %d bits from input_wait()er %d<%d\n",
++		count,
++		input_pool.entropy_count, random_write_wakeup_thresh);
++
++	return count;
++}
++EXPORT_SYMBOL(random_input_wait);
++
++
+ /*********************************************************************
+  *
+  * Entropy extraction routines
+--- a/fs/fcntl.c
++++ b/fs/fcntl.c
+@@ -141,6 +141,7 @@ SYSCALL_DEFINE1(dup, unsigned int, filde
+ 	}
+ 	return ret;
+ }
++EXPORT_SYMBOL(sys_dup);
+ 
+ #define SETFL_MASK (O_APPEND | O_NONBLOCK | O_NDELAY | O_DIRECT | O_NOATIME)
+ 
+--- a/include/linux/miscdevice.h
++++ b/include/linux/miscdevice.h
+@@ -12,6 +12,7 @@
+ #define APOLLO_MOUSE_MINOR	7
+ #define PC110PAD_MINOR		9
+ /*#define ADB_MOUSE_MINOR	10	FIXME OBSOLETE */
++#define CRYPTODEV_MINOR		70	/* /dev/crypto */
+ #define WATCHDOG_MINOR		130	/* Watchdog timer     */
+ #define TEMP_MINOR		131	/* Temperature Sensor */
+ #define RTC_MINOR		135
+--- a/include/linux/random.h
++++ b/include/linux/random.h
+@@ -9,6 +9,7 @@
+ 
+ #include <linux/types.h>
+ #include <linux/ioctl.h>
++#include <linux/types.h> /* for __u32 in user space */
+ #include <linux/irqnr.h>
+ 
+ /* ioctl()'s for the random number generator */
+@@ -34,6 +35,30 @@
+ /* Clear the entropy pool and associated counters.  (Superuser only.) */
+ #define RNDCLEARPOOL	_IO( 'R', 0x06 )
+ 
++#ifdef CONFIG_FIPS_RNG
++
++/* Size of seed value - equal to AES blocksize */
++#define AES_BLOCK_SIZE_BYTES	16
++#define SEED_SIZE_BYTES			AES_BLOCK_SIZE_BYTES
++/* Size of AES key */
++#define KEY_SIZE_BYTES		16
++
++/* ioctl() structure used by FIPS 140-2 Tests */
++struct rand_fips_test {
++	unsigned char key[KEY_SIZE_BYTES];			/* Input */
++	unsigned char datetime[SEED_SIZE_BYTES];	/* Input */
++	unsigned char seed[SEED_SIZE_BYTES];		/* Input */
++	unsigned char result[SEED_SIZE_BYTES];		/* Output */
++};
++
++/* FIPS 140-2 RNG Variable Seed Test. (Superuser only.) */
++#define RNDFIPSVST	_IOWR('R', 0x10, struct rand_fips_test)
++
++/* FIPS 140-2 RNG Monte Carlo Test. (Superuser only.) */
++#define RNDFIPSMCT	_IOWR('R', 0x11, struct rand_fips_test)
++
++#endif /* #ifdef CONFIG_FIPS_RNG */
++
+ struct rand_pool_info {
+ 	int	entropy_count;
+ 	int	buf_size;
+@@ -50,6 +75,10 @@ extern void add_input_randomness(unsigne
+ 				 unsigned int value);
+ extern void add_interrupt_randomness(int irq);
+ 
++extern void random_input_words(__u32 *buf, size_t wordcount, int ent_count);
++extern int random_input_wait(void);
++#define HAS_RANDOM_INPUT_WAIT 1
++
+ extern void get_random_bytes(void *buf, int nbytes);
+ void generate_random_uuid(unsigned char uuid_out[16]);
+ 
+--- a/kernel/pid.c
++++ b/kernel/pid.c
+@@ -389,6 +389,7 @@ struct task_struct *find_task_by_vpid(pi
+ {
+ 	return find_task_by_pid_ns(vnr, current->nsproxy->pid_ns);
+ }
++EXPORT_SYMBOL(find_task_by_vpid);
+ 
+ struct pid *get_task_pid(struct task_struct *task, enum pid_type type)
+ {
diff --git a/target/linux/generic/patches-2.6.35/974-ssb_b43_default_on.patch b/target/linux/generic/patches-2.6.35/974-ssb_b43_default_on.patch
new file mode 100644
index 0000000000..3176dcb4d8
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/974-ssb_b43_default_on.patch
@@ -0,0 +1,19 @@
+--- a/drivers/ssb/Kconfig
++++ b/drivers/ssb/Kconfig
+@@ -29,6 +29,7 @@ config SSB_SPROM
+ config SSB_BLOCKIO
+ 	bool
+ 	depends on SSB
++	default y
+ 
+ config SSB_PCIHOST_POSSIBLE
+ 	bool
+@@ -49,7 +50,7 @@ config SSB_PCIHOST
+ config SSB_B43_PCI_BRIDGE
+ 	bool
+ 	depends on SSB_PCIHOST
+-	default n
++	default y
+ 
+ config SSB_PCMCIAHOST_POSSIBLE
+ 	bool
diff --git a/target/linux/generic/patches-2.6.35/975-hifn795x-byteswap.patch b/target/linux/generic/patches-2.6.35/975-hifn795x-byteswap.patch
new file mode 100644
index 0000000000..3a37c951ec
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/975-hifn795x-byteswap.patch
@@ -0,0 +1,17 @@
+--- a/drivers/crypto/hifn_795x.c
++++ b/drivers/crypto/hifn_795x.c
+@@ -682,12 +682,12 @@ static inline u32 hifn_read_1(struct hif
+ 
+ static inline void hifn_write_0(struct hifn_device *dev, u32 reg, u32 val)
+ {
+-	writel((__force u32)cpu_to_le32(val), dev->bar[0] + reg);
++	writel(val, dev->bar[0] + reg);
+ }
+ 
+ static inline void hifn_write_1(struct hifn_device *dev, u32 reg, u32 val)
+ {
+-	writel((__force u32)cpu_to_le32(val), dev->bar[1] + reg);
++	writel(val, dev->bar[1] + reg);
+ }
+ 
+ static void hifn_wait_puc(struct hifn_device *dev)
diff --git a/target/linux/generic/patches-2.6.35/977-textsearch_kconfig_hacks.patch b/target/linux/generic/patches-2.6.35/977-textsearch_kconfig_hacks.patch
new file mode 100644
index 0000000000..e9577ba5a0
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/977-textsearch_kconfig_hacks.patch
@@ -0,0 +1,23 @@
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -158,16 +158,16 @@ config REED_SOLOMON_DEC16
+ # Textsearch support is select'ed if needed
+ #
+ config TEXTSEARCH
+-	boolean
++	boolean	"Textsearch support"
+ 
+ config TEXTSEARCH_KMP
+-	tristate
++	tristate "Textsearch KMP"
+ 
+ config TEXTSEARCH_BM
+-	tristate
++	tristate "Textsearch BM"
+ 
+ config TEXTSEARCH_FSM
+-	tristate
++	tristate "Textsearch FSM"
+ 
+ config BTREE
+ 	boolean
diff --git a/target/linux/generic/patches-2.6.35/978-lib80211_kconfig_hacks.patch b/target/linux/generic/patches-2.6.35/978-lib80211_kconfig_hacks.patch
new file mode 100644
index 0000000000..c044deac00
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/978-lib80211_kconfig_hacks.patch
@@ -0,0 +1,19 @@
+--- a/net/wireless/Kconfig
++++ b/net/wireless/Kconfig
+@@ -142,13 +142,13 @@ config LIB80211
+ 	  you want this built into your kernel.
+ 
+ config LIB80211_CRYPT_WEP
+-	tristate
++	tristate "LIB80211_CRYPT_WEP"
+ 
+ config LIB80211_CRYPT_CCMP
+-	tristate
++	tristate "LIB80211_CRYPT_CCMP"
+ 
+ config LIB80211_CRYPT_TKIP
+-	tristate
++	tristate "LIB80211_CRYPT_TKIP"
+ 
+ config LIB80211_DEBUG
+ 	bool "lib80211 debugging messages"
diff --git a/target/linux/generic/patches-2.6.35/979-crypto_add_kconfig_prompts.patch b/target/linux/generic/patches-2.6.35/979-crypto_add_kconfig_prompts.patch
new file mode 100644
index 0000000000..b40b2cea96
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/979-crypto_add_kconfig_prompts.patch
@@ -0,0 +1,47 @@
+--- a/crypto/Kconfig
++++ b/crypto/Kconfig
+@@ -32,7 +32,7 @@ config CRYPTO_FIPS
+ 	  option is selected
+ 
+ config CRYPTO_ALGAPI
+-	tristate
++	tristate "ALGAPI"
+ 	select CRYPTO_ALGAPI2
+ 	help
+ 	  This option provides the API for cryptographic algorithms.
+@@ -41,7 +41,7 @@ config CRYPTO_ALGAPI2
+ 	tristate
+ 
+ config CRYPTO_AEAD
+-	tristate
++	tristate "AEAD"
+ 	select CRYPTO_AEAD2
+ 	select CRYPTO_ALGAPI
+ 
+@@ -50,7 +50,7 @@ config CRYPTO_AEAD2
+ 	select CRYPTO_ALGAPI2
+ 
+ config CRYPTO_BLKCIPHER
+-	tristate
++	tristate "BLKCIPHER"
+ 	select CRYPTO_BLKCIPHER2
+ 	select CRYPTO_ALGAPI
+ 
+@@ -61,7 +61,7 @@ config CRYPTO_BLKCIPHER2
+ 	select CRYPTO_WORKQUEUE
+ 
+ config CRYPTO_HASH
+-	tristate
++	tristate "HASH"
+ 	select CRYPTO_HASH2
+ 	select CRYPTO_ALGAPI
+ 
+@@ -70,7 +70,7 @@ config CRYPTO_HASH2
+ 	select CRYPTO_ALGAPI2
+ 
+ config CRYPTO_RNG
+-	tristate
++	tristate "RNG"
+ 	select CRYPTO_RNG2
+ 	select CRYPTO_ALGAPI
+ 
diff --git a/target/linux/generic/patches-2.6.35/980-vm_exports.patch b/target/linux/generic/patches-2.6.35/980-vm_exports.patch
new file mode 100644
index 0000000000..5d0b5c6970
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/980-vm_exports.patch
@@ -0,0 +1,142 @@
+--- a/mm/shmem.c
++++ b/mm/shmem.c
+@@ -29,6 +29,7 @@
+ #include <linux/mm.h>
+ #include <linux/module.h>
+ #include <linux/swap.h>
++#include <linux/ima.h>
+ 
+ static struct vfsmount *shm_mnt;
+ 
+@@ -2620,6 +2621,16 @@ int shmem_lock(struct file *file, int lo
+ 
+ /* common code */
+ 
++void shmem_set_file(struct vm_area_struct *vma, struct file *file)
++{
++	ima_counts_get(file);
++	if (vma->vm_file)
++		fput(vma->vm_file);
++	vma->vm_file = file;
++	vma->vm_ops = &shmem_vm_ops;
++}
++EXPORT_SYMBOL_GPL(shmem_set_file);
++
+ /**
+  * shmem_file_setup - get an unlinked file living in tmpfs
+  * @name: name for dentry (to be seen in /proc/<pid>/maps
+@@ -2697,9 +2708,6 @@ int shmem_zero_setup(struct vm_area_stru
+ 	if (IS_ERR(file))
+ 		return PTR_ERR(file);
+ 
+-	if (vma->vm_file)
+-		fput(vma->vm_file);
+-	vma->vm_file = file;
+-	vma->vm_ops = &shmem_vm_ops;
++	shmem_set_file(vma, file);
+ 	return 0;
+ }
+--- a/fs/file.c
++++ b/fs/file.c
+@@ -271,6 +271,7 @@ int expand_files(struct files_struct *fi
+ 	/* All good, so we try */
+ 	return expand_fdtable(files, nr);
+ }
++EXPORT_SYMBOL_GPL(expand_files);
+ 
+ static int count_open_files(struct fdtable *fdt)
+ {
+--- a/kernel/exit.c
++++ b/kernel/exit.c
+@@ -514,6 +514,7 @@ struct files_struct *get_files_struct(st
+ 
+ 	return files;
+ }
++EXPORT_SYMBOL_GPL(get_files_struct);
+ 
+ void put_files_struct(struct files_struct *files)
+ {
+@@ -535,6 +536,7 @@ void put_files_struct(struct files_struc
+ 		rcu_read_unlock();
+ 	}
+ }
++EXPORT_SYMBOL_GPL(put_files_struct);
+ 
+ void reset_files_struct(struct files_struct *files)
+ {
+--- a/kernel/fork.c
++++ b/kernel/fork.c
+@@ -177,6 +177,7 @@ void __put_task_struct(struct task_struc
+ 	if (!profile_handoff_task(tsk))
+ 		free_task(tsk);
+ }
++EXPORT_SYMBOL_GPL(__put_task_struct);
+ 
+ /*
+  * macro override instead of weak attribute alias, to workaround
+--- a/kernel/sched.c
++++ b/kernel/sched.c
+@@ -4367,6 +4367,7 @@ int can_nice(const struct task_struct *p
+ 	return (nice_rlim <= task_rlimit(p, RLIMIT_NICE) ||
+ 		capable(CAP_SYS_NICE));
+ }
++EXPORT_SYMBOL_GPL(can_nice);
+ 
+ #ifdef __ARCH_WANT_SYS_NICE
+ 
+--- a/mm/memory.c
++++ b/mm/memory.c
+@@ -1203,6 +1203,7 @@ unsigned long zap_page_range(struct vm_a
+ 		tlb_finish_mmu(tlb, address, end);
+ 	return end;
+ }
++EXPORT_SYMBOL_GPL(zap_page_range);
+ 
+ /**
+  * zap_vma_ptes - remove ptes mapping the vma
+@@ -2596,6 +2597,7 @@ int vmtruncate_range(struct inode *inode
+ 
+ 	return 0;
+ }
++EXPORT_SYMBOL_GPL(vmtruncate_range);
+ 
+ /*
+  * We enter with non-exclusive mmap_sem (to exclude vma changes,
+--- a/mm/vmalloc.c
++++ b/mm/vmalloc.c
+@@ -1173,6 +1173,7 @@ void unmap_kernel_range(unsigned long ad
+ 	vunmap_page_range(addr, end);
+ 	flush_tlb_kernel_range(addr, end);
+ }
++EXPORT_SYMBOL_GPL(unmap_kernel_range);
+ 
+ int map_vm_area(struct vm_struct *area, pgprot_t prot, struct page ***pages)
+ {
+@@ -1288,6 +1289,7 @@ struct vm_struct *get_vm_area(unsigned l
+ 	return __get_vm_area_node(size, 1, flags, VMALLOC_START, VMALLOC_END,
+ 				-1, GFP_KERNEL, __builtin_return_address(0));
+ }
++EXPORT_SYMBOL_GPL(get_vm_area);
+ 
+ struct vm_struct *get_vm_area_caller(unsigned long size, unsigned long flags,
+ 				void *caller)
+--- a/include/linux/mm.h
++++ b/include/linux/mm.h
+@@ -728,6 +728,7 @@ extern void show_free_areas(void);
+ 
+ int shmem_lock(struct file *file, int lock, struct user_struct *user);
+ struct file *shmem_file_setup(const char *name, loff_t size, unsigned long flags);
++void shmem_set_file(struct vm_area_struct *vma, struct file *file);
+ int shmem_zero_setup(struct vm_area_struct *);
+ 
+ #ifndef CONFIG_MMU
+--- a/kernel/signal.c
++++ b/kernel/signal.c
+@@ -1121,6 +1121,7 @@ struct sighand_struct *lock_task_sighand
+ 
+ 	return sighand;
+ }
++EXPORT_SYMBOL(lock_task_sighand);
+ 
+ /*
+  * send signal info to all the members of a group
diff --git a/target/linux/generic/patches-2.6.35/981-wireless_ext_kconfig_hack.patch b/target/linux/generic/patches-2.6.35/981-wireless_ext_kconfig_hack.patch
new file mode 100644
index 0000000000..daac5898ae
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/981-wireless_ext_kconfig_hack.patch
@@ -0,0 +1,22 @@
+--- a/net/wireless/Kconfig
++++ b/net/wireless/Kconfig
+@@ -1,5 +1,5 @@
+ config WIRELESS_EXT
+-	bool
++	bool "Wireless extensions"
+ 
+ config WEXT_CORE
+ 	def_bool y
+@@ -11,10 +11,10 @@ config WEXT_PROC
+ 	depends on WEXT_CORE
+ 
+ config WEXT_SPY
+-	bool
++	bool "WEXT_SPY"
+ 
+ config WEXT_PRIV
+-	bool
++	bool "WEXT_PRIV"
+ 
+ config CFG80211
+ 	tristate "cfg80211 - wireless configuration API"
diff --git a/target/linux/generic/patches-2.6.35/985-cris-headers.patch b/target/linux/generic/patches-2.6.35/985-cris-headers.patch
new file mode 100644
index 0000000000..73ede933ba
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/985-cris-headers.patch
@@ -0,0 +1,27 @@
+--- a/arch/cris/include/arch-v10/arch/Kbuild
++++ b/arch/cris/include/arch-v10/arch/Kbuild
+@@ -1,3 +1,5 @@
++header-y += elf.h
++header-y += ptrace.h
+ header-y += user.h
+ header-y += svinto.h
+ header-y += sv_addr_ag.h
+--- a/arch/cris/include/asm/Kbuild
++++ b/arch/cris/include/asm/Kbuild
+@@ -1,11 +1,14 @@
+ include include/asm-generic/Kbuild.asm
+ 
+-header-y += arch-v10/
+-header-y += arch-v32/
++header-y += ../arch-v10/arch/
++header-y += ../arch-v32/arch/
+ 
++header-y += elf.h
+ header-y += ethernet.h
++header-y += page.h
+ header-y += rtc.h
+ header-y += sync_serial.h
++header-y += user.h
+ 
+ unifdef-y += etraxgpio.h
+ unifdef-y += rs485.h
diff --git a/target/linux/generic/patches-2.6.35/991-ppc4xx_optimization.patch b/target/linux/generic/patches-2.6.35/991-ppc4xx_optimization.patch
new file mode 100644
index 0000000000..0efb777809
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/991-ppc4xx_optimization.patch
@@ -0,0 +1,31 @@
+Upstream doesn't optimize the kernel and bootwrappers for ppc44x because
+they still want to support gcc 3.3 -- well, we don't.
+
+--- a/arch/powerpc/Makefile
++++ b/arch/powerpc/Makefile
+@@ -123,7 +123,8 @@ ifeq ($(CONFIG_FUNCTION_TRACER),y)
+ KBUILD_CFLAGS		+= -mno-sched-epilog
+ endif
+ 
+-cpu-as-$(CONFIG_4xx)		+= -Wa,-m405
++cpu-as-$(CONFIG_40x)		+= -Wa,-m405
++cpu-as-$(CONFIG_44x)		+= -Wa,-m440
+ cpu-as-$(CONFIG_6xx)		+= -Wa,-maltivec
+ cpu-as-$(CONFIG_POWER4)		+= -Wa,-maltivec
+ cpu-as-$(CONFIG_E500)		+= -Wa,-me500
+--- a/arch/powerpc/boot/Makefile
++++ b/arch/powerpc/boot/Makefile
+@@ -38,10 +38,10 @@ BOOTCFLAGS	+= -I$(obj) -I$(srctree)/$(ob
+ DTS_FLAGS	?= -p 1024
+ 
+ $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
+-$(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
++$(obj)/ebony.o: BOOTCFLAGS += -mcpu=440
+ $(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405
+-$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
+-$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
++$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=440
++$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440
+ $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
+ $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
+ $(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
diff --git a/target/linux/generic/patches-2.6.35/997-lzo_decompressor_fix.patch b/target/linux/generic/patches-2.6.35/997-lzo_decompressor_fix.patch
new file mode 100644
index 0000000000..450986538d
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/997-lzo_decompressor_fix.patch
@@ -0,0 +1,11 @@
+--- a/usr/Kconfig
++++ b/usr/Kconfig
+@@ -75,7 +75,7 @@ config RD_LZMA
+ config RD_LZO
+ 	bool "Support initial ramdisks compressed using LZO" if EMBEDDED
+ 	default !EMBEDDED
+-	depends on BLK_DEV_INITRD
++	depends on BLK_DEV_INITRD && HAVE_KERNEL_LZO
+ 	select DECOMPRESS_LZO
+ 	help
+ 	  Support loading of a LZO encoded initial ramdisk or cpio buffer
diff --git a/target/linux/generic/patches-2.6.35/998-openwrt_lzma_options.patch b/target/linux/generic/patches-2.6.35/998-openwrt_lzma_options.patch
new file mode 100644
index 0000000000..3e32b67aed
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/998-openwrt_lzma_options.patch
@@ -0,0 +1,54 @@
+--- a/scripts/Makefile.lib
++++ b/scripts/Makefile.lib
+@@ -238,7 +238,7 @@ cmd_bzip2 = (cat $(filter-out FORCE,$^)
+ 
+ quiet_cmd_lzma = LZMA    $@
+ cmd_lzma = (cat $(filter-out FORCE,$^) | \
+-	lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
++	lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ 	(rm -f $@ ; false)
+ 
+ quiet_cmd_lzo = LZO    $@
+--- a/scripts/gen_initramfs_list.sh
++++ b/scripts/gen_initramfs_list.sh
+@@ -226,7 +226,7 @@ cpio_list=
+ output="/dev/stdout"
+ output_file=""
+ is_cpio_compressed=
+-compr="gzip -9 -f"
++compr="gzip -9 -f -"
+ 
+ arg="$1"
+ case "$arg" in
+@@ -240,9 +240,9 @@ case "$arg" in
+ 		output_file="$1"
+ 		cpio_list="$(mktemp ${TMPDIR:-/tmp}/cpiolist.XXXXXX)"
+ 		output=${cpio_list}
+-		echo "$output_file" | grep -q "\.gz$" && compr="gzip -9 -f"
+-		echo "$output_file" | grep -q "\.bz2$" && compr="bzip2 -9 -f"
+-		echo "$output_file" | grep -q "\.lzma$" && compr="lzma -9 -f"
++		echo "$output_file" | grep -q "\.gz$" && compr="gzip -9 -f -"
++		echo "$output_file" | grep -q "\.bz2$" && compr="bzip2 -9 -f -"
++		echo "$output_file" | grep -q "\.lzma$" && compr="lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so"
+ 		echo "$output_file" | grep -q "\.lzo$" && compr="lzop -9 -f"
+ 		echo "$output_file" | grep -q "\.cpio$" && compr="cat"
+ 		shift
+@@ -294,7 +294,7 @@ if [ ! -z ${output_file} ]; then
+ 	if [ "${is_cpio_compressed}" = "compressed" ]; then
+ 		cat ${cpio_tfile} > ${output_file}
+ 	else
+-		(cat ${cpio_tfile} | ${compr}  - > ${output_file}) \
++		(cat ${cpio_tfile} | ${compr} > ${output_file}) \
+ 		|| (rm -f ${output_file} ; false)
+ 	fi
+ 	[ -z ${cpio_file} ] && rm ${cpio_tfile}
+--- a/lib/decompress.c
++++ b/lib/decompress.c
+@@ -36,6 +36,7 @@ static const struct compress_format {
+ 	{ {037, 0236}, "gzip", gunzip },
+ 	{ {0x42, 0x5a}, "bzip2", bunzip2 },
+ 	{ {0x5d, 0x00}, "lzma", unlzma },
++	{ {0x6d, 0x00}, "lzma-openwrt", unlzma },
+ 	{ {0x89, 0x4c}, "lzo", unlzo },
+ 	{ {0, 0}, NULL, NULL }
+ };
diff --git a/target/linux/generic/patches-2.6.35/999-use_preinit_as_init.patch b/target/linux/generic/patches-2.6.35/999-use_preinit_as_init.patch
new file mode 100644
index 0000000000..5499f75bc6
--- /dev/null
+++ b/target/linux/generic/patches-2.6.35/999-use_preinit_as_init.patch
@@ -0,0 +1,14 @@
+--- a/init/main.c
++++ b/init/main.c
+@@ -842,10 +842,7 @@ static noinline int init_post(void)
+ 		printk(KERN_WARNING "Failed to execute %s.  Attempting "
+ 					"defaults...\n", execute_command);
+ 	}
+-	run_init_process("/sbin/init");
+-	run_init_process("/etc/init");
+-	run_init_process("/bin/init");
+-	run_init_process("/bin/sh");
++	run_init_process("/etc/preinit");
+ 
+ 	panic("No init found.  Try passing init= option to kernel. "
+ 	      "See Linux Documentation/init.txt for guidance.");